3482 files changed, 253304 insertions, 67659 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 364c6da..e6ab550 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -13,8 +13,22 @@ config OPROFILE
 
 	  If unsure, say N.
 
+config OPROFILE_IBS
+	bool "OProfile AMD IBS support (EXPERIMENTAL)"
+	default n
+	depends on OPROFILE && SMP && X86
+	help
+          Instruction-Based Sampling (IBS) is a new profiling
+          technique that provides rich, precise program performance
+          information. IBS is introduced by AMD Family10h processors
+          (AMD Opteron Quad-Core processor “Barcelona�) to overcome
+          the limitations of conventional performance counter
+          sampling.
+
+	  If unsure, say N.
+
 config HAVE_OPROFILE
-	def_bool n
+	bool
 
 config KPROBES
 	bool "Kprobes"
@@ -28,7 +42,7 @@ config KPROBES
 	  If in doubt, say "N".
 
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
-	def_bool n
+	bool
 	help
 	  Some architectures are unable to perform unaligned accesses
 	  without the use of get_unaligned/put_unaligned. Others are
@@ -51,13 +65,13 @@ config KRETPROBES
 	depends on KPROBES && HAVE_KRETPROBES
 
 config HAVE_IOREMAP_PROT
-	def_bool n
+	bool
 
 config HAVE_KPROBES
-	def_bool n
+	bool
 
 config HAVE_KRETPROBES
-	def_bool n
+	bool
 
 #
 # An arch should select this if it provides all these things:
@@ -75,16 +89,16 @@ config HAVE_KRETPROBES
 #	signal delivery		calls tracehook_signal_handler()
 #
 config HAVE_ARCH_TRACEHOOK
-	def_bool n
+	bool
 
 config HAVE_DMA_ATTRS
-	def_bool n
+	bool
 
 config USE_GENERIC_SMP_HELPERS
-	def_bool n
+	bool
 
 config HAVE_CLK
-	def_bool n
+	bool
 	help
 	  The <linux/clk.h> calls support software clock gating and
 	  thus are a key power management tool on many systems.
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 1bec55d..6110197 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -5,6 +5,7 @@
 config ALPHA
 	bool
 	default y
+	select HAVE_AOUT
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	help
@@ -68,10 +69,8 @@ config AUTO_IRQ_AFFINITY
 	depends on SMP
 	default y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 source "init/Kconfig"
+source "kernel/Kconfig.freezer"
 
 
 menu "System setup"
@@ -224,8 +223,7 @@ config ALPHA_MIATA
 	bool "Miata"
 	help
 	  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
-	  or 600au).  There is an Installation HOWTO for this hardware at
-	  <http://eijk.homelinux.org/~stefan/miata.html>.
+	  or 600au).
 
 config ALPHA_MIKASA
 	bool "Mikasa"
diff --git a/arch/alpha/include/asm/a.out.h b/arch/alpha/include/asm/a.out.h
index 02ce847..acdc681 100644
--- a/arch/alpha/include/asm/a.out.h
+++ b/arch/alpha/include/asm/a.out.h
@@ -95,7 +95,7 @@ struct exec
    Worse, we have to notice the start address before swapping to use
    /sbin/loader, which of course is _not_ a TASO application.  */
 #define SET_AOUT_PERSONALITY(BFPM, EX) \
-	set_personality (((BFPM->sh_bang || EX.ah.entry < 0x100000000L \
+	set_personality (((BFPM->taso || EX.ah.entry < 0x100000000L \
 			   ? ADDR_LIMIT_32BIT : 0) | PER_OSF4))
 
 #endif /* __KERNEL__ */
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
index fc1002e..5c75c1b 100644
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@@ -144,9 +144,9 @@ extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-#define SET_PERSONALITY(EX, IBCS2)				\
+#define SET_PERSONALITY(EX)					\
 	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : (IBCS2) ? PER_SVR4 : PER_LINUX)
+	   ? PER_LINUX_32BIT : PER_LINUX)
 
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
diff --git a/arch/alpha/include/asm/statfs.h b/arch/alpha/include/asm/statfs.h
index ad15830..de35cd4 100644
--- a/arch/alpha/include/asm/statfs.h
+++ b/arch/alpha/include/asm/statfs.h
@@ -1,6 +1,10 @@
 #ifndef _ALPHA_STATFS_H
 #define _ALPHA_STATFS_H
 
+/* Alpha is the only 64-bit platform with 32-bit statfs. And doesn't
+   even seem to implement statfs64 */
+#define __statfs_word __u32
+
 #include <asm-generic/statfs.h>
 
 #endif
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 15fda43..d069526 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -74,12 +74,14 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define TIF_UAC_SIGBUS		7
 #define TIF_MEMDIE		8
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal */
+#define TIF_FREEZE		16	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED)
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 04dcc5e..9cd8dca 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -655,7 +655,7 @@ __marvel_rtc_io(u8 b, unsigned long addr, int write)
 
 	case 0x71:					/* RTC_PORT(1) */
 		rtc_access.index = index;
-		rtc_access.data = BCD_TO_BIN(b);
+		rtc_access.data = bcd2bin(b);
 		rtc_access.function = 0x48 + !write;	/* GET/PUT_TOY */
 
 #ifdef CONFIG_SMP
@@ -668,7 +668,7 @@ __marvel_rtc_io(u8 b, unsigned long addr, int write)
 #else
 		__marvel_access_rtc(&rtc_access);
 #endif
-		ret = BIN_TO_BCD(rtc_access.data);
+		ret = bin2bcd(rtc_access.data);
 		break;
 
 	default:
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 8509dad..18a3ea1 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -165,14 +165,11 @@ osf_getdirentries(unsigned int fd, struct osf_dirent __user *dirent,
 	buf.error = 0;
 
 	error = vfs_readdir(file, osf_filldir, &buf);
-	if (error < 0)
-		goto out_putf;
-
-	error = buf.error;
+	if (error >= 0)
+		error = buf.error;
 	if (count != buf.count)
 		error = count - buf.count;
 
- out_putf:
 	fput(file);
  out:
 	return error;
@@ -986,10 +983,12 @@ asmlinkage int
 osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
 	   struct timeval32 __user *tvp)
 {
-	s64 timeout = MAX_SCHEDULE_TIMEOUT;
+	struct timespec end_time, *to = NULL;
 	if (tvp) {
 		time_t sec, usec;
 
+		to = &end_time;
+
 		if (!access_ok(VERIFY_READ, tvp, sizeof(*tvp))
 		    || __get_user(sec, &tvp->tv_sec)
 		    || __get_user(usec, &tvp->tv_usec)) {
@@ -999,14 +998,13 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
 		if (sec < 0 || usec < 0)
 			return -EINVAL;
 
-		if ((unsigned long) sec < MAX_SELECT_SECONDS) {
-			timeout = (usec + 1000000/HZ - 1) / (1000000/HZ);
-			timeout += sec * (unsigned long) HZ;
-		}
+		if (poll_select_set_timeout(to, sec, usec * NSEC_PER_USEC))
+			return -EINVAL;		
+
 	}
 
 	/* OSF does not copy back the remaining time.  */
-	return core_sys_select(n, inp, outp, exp, &timeout);
+	return core_sys_select(n, inp, outp, exp, to);
 }
 
 struct rusage32 {
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 2179c60..b9094da 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -41,13 +41,6 @@ mk_iommu_pte(unsigned long paddr)
 	return (paddr >> (PAGE_SHIFT-1)) | 1;
 }
 
-static inline long
-calc_npages(long bytes)
-{
-	return (bytes + PAGE_SIZE - 1) >> PAGE_SHIFT;
-}
-
-
 /* Return the minimum of MAX or the first power of two larger
    than main memory.  */
 
@@ -287,7 +280,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 	if (!arena || arena->dma_base + arena->size - 1 > max_dma)
 		arena = hose->sg_isa;
 
-	npages = calc_npages((paddr & ~PAGE_MASK) + size);
+	npages = iommu_num_pages(paddr, size, PAGE_SIZE);
 
 	/* Force allocation to 64KB boundary for ISA bridges. */
 	if (pdev && pdev == isa_bridge)
@@ -387,7 +380,7 @@ pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
 		BUG();
 	}
 
-	npages = calc_npages((dma_addr & ~PAGE_MASK) + size);
+	npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
 
 	spin_lock_irqsave(&arena->lock, flags);
 
@@ -580,7 +573,7 @@ sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
 	   contiguous.  */
 
 	paddr &= ~PAGE_MASK;
-	npages = calc_npages(paddr + size);
+	npages = iommu_num_pages(paddr, size, PAGE_SIZE);
 	dma_ofs = iommu_arena_alloc(dev, arena, npages, 0);
 	if (dma_ofs < 0) {
 		/* If we attempted a direct map above but failed, die.  */
@@ -616,7 +609,7 @@ sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
 			sg++;
 		}
 
-		npages = calc_npages((paddr & ~PAGE_MASK) + size);
+		npages = iommu_num_pages(paddr, size, PAGE_SIZE);
 
 		paddr &= PAGE_MASK;
 		for (i = 0; i < npages; ++i, paddr += PAGE_SIZE)
@@ -775,7 +768,7 @@ pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
 		DBGA("    (%ld) sg [%lx,%lx]\n",
 		     sg - end + nents, addr, size);
 
-		npages = calc_npages((addr & ~PAGE_MASK) + size);
+		npages = iommu_num_pages(addr, size, PAGE_SIZE);
 		ofs = (addr - arena->dma_base) >> PAGE_SHIFT;
 		iommu_arena_free(arena, ofs, npages);
 
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 83df541..e657c45 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -27,6 +27,7 @@
 #include <linux/cache.h>
 #include <linux/profile.h>
 #include <linux/bitops.h>
+#include <linux/cpu.h>
 
 #include <asm/hwrpb.h>
 #include <asm/ptrace.h>
@@ -149,6 +150,9 @@ smp_callin(void)
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
 
+	/* inform the notifiers about the new cpu */
+	notify_cpu_starting(cpuid);
+
 	/* Must have completely accurate bogos.  */
 	local_irq_enable();
 
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
index 99a7f19..a4555f4 100644
--- a/arch/alpha/kernel/sys_sable.c
+++ b/arch/alpha/kernel/sys_sable.c
@@ -47,7 +47,7 @@ typedef struct irq_swizzle_struct
 
 static irq_swizzle_t *sable_lynx_irq_swizzle;
 
-static void sable_lynx_init_irq(int nr_irqs);
+static void sable_lynx_init_irq(int nr_of_irqs);
 
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
 
@@ -530,11 +530,11 @@ sable_lynx_srm_device_interrupt(unsigned long vector)
 }
 
 static void __init
-sable_lynx_init_irq(int nr_irqs)
+sable_lynx_init_irq(int nr_of_irqs)
 {
 	long i;
 
-	for (i = 0; i < nr_irqs; ++i) {
+	for (i = 0; i < nr_of_irqs; ++i) {
 		irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
 		irq_desc[i].chip = &sable_lynx_irq_type;
 	}
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index 75480ca..e6a2314 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -346,12 +346,12 @@ time_init(void)
 	year = CMOS_READ(RTC_YEAR);
 
 	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 	}
 
 	/* PC-like is standard; used for year >= 70 */
@@ -525,7 +525,7 @@ set_rtc_mmss(unsigned long nowtime)
 
 	cmos_minutes = CMOS_READ(RTC_MINUTES);
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
+		cmos_minutes = bcd2bin(cmos_minutes);
 
 	/*
 	 * since we're only adjusting minutes and seconds,
@@ -543,8 +543,8 @@ set_rtc_mmss(unsigned long nowtime)
 
 	if (abs(real_minutes - cmos_minutes) < 30) {
 		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
 		}
 		CMOS_WRITE(real_seconds,RTC_SECONDS);
 		CMOS_WRITE(real_minutes,RTC_MINUTES);
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
index 7c3d5ec..bd8ac53 100644
--- a/arch/alpha/oprofile/common.c
+++ b/arch/alpha/oprofile/common.c
@@ -106,7 +106,7 @@ op_axp_stop(void)
 }
 
 static int
-op_axp_create_files(struct super_block * sb, struct dentry * root)
+op_axp_create_files(struct super_block *sb, struct dentry *root)
 {
 	int i;
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 70dba16..5021db2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration"
 config ARM
 	bool
 	default y
+	select HAVE_AOUT
 	select HAVE_IDE
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
@@ -140,15 +141,11 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
 config ZONE_DMA
 	bool
-	default y
 
 config GENERIC_ISA_DMA
 	bool
@@ -178,6 +175,11 @@ config OPROFILE_MPCORE
 config OPROFILE_ARM11_CORE
 	bool
 
+config OPROFILE_ARMV7
+	def_bool y
+	depends on CPU_V7 && !SMP
+	bool
+
 endif
 
 config VECTORS_BASE
@@ -190,6 +192,8 @@ config VECTORS_BASE
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "System Type"
 
 choice
@@ -245,6 +249,7 @@ config ARCH_CLPS7500
 	select TIMER_ACORN
 	select ISA
 	select NO_IOPORT
+	select ARCH_SPARSEMEM_ENABLE
 	help
 	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
 
@@ -306,6 +311,7 @@ config ARCH_IOP13XX
 	select PLAT_IOP
 	select PCI
 	select ARCH_SUPPORTS_MSI
+	select VMSPLIT_1G
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -350,6 +356,7 @@ config ARCH_IXP4XX
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select DMABOUNCE if PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -434,7 +441,7 @@ config ARCH_ORION5X
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
-	  Orion-2 (5281).
+	  Orion-2 (5281), Orion-1-90 (6183).
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
@@ -464,6 +471,7 @@ config ARCH_RPC
 	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
 	select NO_IOPORT
+	select ARCH_SPARSEMEM_ENABLE
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -471,9 +479,7 @@ config ARCH_RPC
 config ARCH_SA1100
 	bool "SA1100-based"
 	select ISA
-	select ARCH_DISCONTIGMEM_ENABLE
 	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_SELECT_MEMORY_MODEL
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select GENERIC_TIME
@@ -497,6 +503,7 @@ config ARCH_SHARK
 	bool "Shark"
 	select ISA
 	select ISA_DMA
+	select ZONE_DMA
 	select PCI
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
@@ -504,6 +511,8 @@ config ARCH_SHARK
 
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
+	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
+	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 	help
 	  Say Y here for systems based on one of the Sharp LH7A40X
 	  System on a Chip processors.  These CPUs include an ARM922T
@@ -515,7 +524,9 @@ config ARCH_DAVINCI
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select ZONE_DMA
 	help
 	  Support for TI's DaVinci platform.
 
@@ -529,16 +540,15 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_MSM7X00A
-	bool "Qualcomm MSM7X00A"
+config ARCH_MSM
+	bool "Qualcomm MSM"
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
-	  Support for Qualcomm MSM7X00A based systems.  This runs on the ARM11
-	  apps processor of the MSM7X00A and depends on a shared memory
+	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
+	  apps processor of the MSM7K and depends on a shared memory
 	  interface to the ARM9 modem processor which runs the baseband stack
 	  and controls some vital subsystems (clock and power control, etc).
-	  <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp>
 
 endchoice
 
@@ -734,6 +744,29 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+choice
+	prompt "Memory split"
+	default VMSPLIT_3G
+	help
+	  Select the desired split between kernel and user memory.
+
+	  If you are not absolutely sure what you are doing, leave this
+	  option alone!
+
+	config VMSPLIT_3G
+		bool "3G/1G user/kernel split"
+	config VMSPLIT_2G
+		bool "2G/2G user/kernel split"
+	config VMSPLIT_1G
+		bool "1G/3G user/kernel split"
+endchoice
+
+config PAGE_OFFSET
+	hex
+	default 0x40000000 if VMSPLIT_1G
+	default 0x80000000 if VMSPLIT_2G
+	default 0xC0000000
+
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
@@ -815,20 +848,18 @@ config ARCH_FLATMEM_HAS_HOLES
 	default y
 	depends on FLATMEM
 
+# Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
-	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
 
 config ARCH_SPARSEMEM_ENABLE
 	bool
 
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool ARCH_SPARSEMEM_ENABLE
+
 config ARCH_SELECT_MEMORY_MODEL
-	bool
+	def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
 
 config NODES_SHIFT
 	int
@@ -845,7 +876,7 @@ config LEDS
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+		   ARCH_AT91 || ARCH_DAVINCI || \
 		   ARCH_KS8695 || MACH_RD88F5182
 	help
 	  If you say Y here, the LEDs on your machine will be used
@@ -1005,9 +1036,9 @@ config ATAGS_PROC
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+menu "CPU Power Management"
 
-menu "CPU Frequency scaling"
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1047,10 +1078,12 @@ config CPU_FREQ_PXA
 	default y
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
-endmenu
-
 endif
 
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
 menu "Floating point emulation"
 
 comment "At least one emulation must be selected"
@@ -1202,6 +1235,8 @@ source "drivers/power/Kconfig"
 
 source "drivers/hwmon/Kconfig"
 
+source "drivers/thermal/Kconfig"
+
 source "drivers/watchdog/Kconfig"
 
 source "drivers/ssb/Kconfig"
@@ -1220,8 +1255,14 @@ source "drivers/hid/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "drivers/mmc/Kconfig"
 
+source "drivers/memstick/Kconfig"
+
+source "drivers/accessibility/Kconfig"
+
 source "drivers/leds/Kconfig"
 
 source "drivers/rtc/Kconfig"
@@ -1230,6 +1271,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/auxdisplay/Kconfig"
+
 source "drivers/regulator/Kconfig"
 
 source "drivers/uio/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 703a44f..bd6e281 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -47,7 +47,7 @@ comma = ,
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7a,-march=armv5t -Wa$(comma)-march=armv7a)
+arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
 arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
@@ -118,9 +118,10 @@ endif
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
+ machine-$(CONFIG_ARCH_OMAP3)	   := omap2
     plat-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
-    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx
+    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx s3c
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
  machine-$(CONFIG_ARCH_IMX)	   := imx
@@ -140,7 +141,7 @@ endif
  machine-$(CONFIG_ARCH_MX3)	   := mx3
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
     plat-$(CONFIG_PLAT_ORION)	   := orion
- machine-$(CONFIG_ARCH_MSM7X00A)   := msm
+ machine-$(CONFIG_ARCH_MSM)	   := msm
  machine-$(CONFIG_ARCH_LOKI)       := loki
  machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
 
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 94462a0..7a03f20 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -76,7 +76,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
 EXTRA_CFLAGS  := -fpic -fno-builtin
-EXTRA_AFLAGS  :=
+EXTRA_AFLAGS  := -Wa,-march=all
 
 # Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
 # linker symbols.  We only define initrd_phys and params_phys if the
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index d42f89b..84a1e04 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -421,6 +421,7 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		add	r1, r1, #1048576
 		str	r1, [r0]
 		mov	pc, lr
+ENDPROC(__setup_mmu)
 
 __armv4_mmu_cache_on:
 		mov	r12, lr
@@ -801,7 +802,7 @@ loop1:
 		add	r2, r2, #4		@ add 4 (line length offset)
 		ldr	r4, =0x3ff
 		ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-		.word	0xe16f5f14		@ clz r5, r4 - find bit position of way size increment
+		clz	r5, r4			@ find bit position of way size increment
 		ldr	r7, =0x7fff
 		ands	r7, r7, r1, lsr #13	@ extract max number of the index size
 loop2:
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 3e07346..86b5e69 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -12,10 +12,11 @@ config ICST307
 
 config SA1111
 	bool
-	select DMABOUNCE
+	select DMABOUNCE if !ARCH_PXA
 
 config DMABOUNCE
 	bool
+	select ZONE_DMA
 
 config TIMER_ACORN
 	bool
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index aecc6c3..f030f07 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -154,9 +154,7 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
 #endif
 
 	write_lock_irqsave(&device_info->lock, flags);
-
 	list_add(&buf->node, &device_info->safe_buffers);
-
 	write_unlock_irqrestore(&device_info->lock, flags);
 
 	return buf;
@@ -205,8 +203,22 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
 
 /* ************************************************** */
 
-static inline dma_addr_t
-map_single(struct device *dev, void *ptr, size_t size,
+static struct safe_buffer *find_safe_buffer_dev(struct device *dev,
+		dma_addr_t dma_addr, const char *where)
+{
+	if (!dev || !dev->archdata.dmabounce)
+		return NULL;
+	if (dma_mapping_error(dev, dma_addr)) {
+		if (dev)
+			dev_err(dev, "Trying to %s invalid mapping\n", where);
+		else
+			pr_err("unknown device: Trying to %s invalid mapping\n", where);
+		return NULL;
+	}
+	return find_safe_buffer(dev->archdata.dmabounce, dma_addr);
+}
+
+static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 		enum dma_data_direction dir)
 {
 	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
@@ -270,33 +282,21 @@ map_single(struct device *dev, void *ptr, size_t size,
 	return dma_addr;
 }
 
-static inline void
-unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction dir)
+static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
+		size_t size, enum dma_data_direction dir)
 {
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-	struct safe_buffer *buf = NULL;
-
-	/*
-	 * Trying to unmap an invalid mapping
-	 */
-	if (dma_mapping_error(dev, dma_addr)) {
-		dev_err(dev, "Trying to unmap invalid mapping\n");
-		return;
-	}
-
-	if (device_info)
-		buf = find_safe_buffer(device_info, dma_addr);
+	struct safe_buffer *buf = find_safe_buffer_dev(dev, dma_addr, "unmap");
 
 	if (buf) {
 		BUG_ON(buf->size != size);
+		BUG_ON(buf->direction != dir);
 
 		dev_dbg(dev,
 			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
 			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
 			buf->safe, buf->safe_dma_addr);
 
-		DO_STATS ( device_info->bounce_count++ );
+		DO_STATS(dev->archdata.dmabounce->bounce_count++);
 
 		if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
 			void *ptr = buf->ptr;
@@ -317,74 +317,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 			dmac_clean_range(ptr, ptr + size);
 			outer_clean_range(__pa(ptr), __pa(ptr) + size);
 		}
-		free_safe_buffer(device_info, buf);
-	}
-}
-
-static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-			enum dma_data_direction dir)
-{
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-	struct safe_buffer *buf = NULL;
-
-	if (device_info)
-		buf = find_safe_buffer(device_info, dma_addr);
-
-	if (buf) {
-		/*
-		 * Both of these checks from original code need to be
-		 * commented out b/c some drivers rely on the following:
-		 *
-		 * 1) Drivers may map a large chunk of memory into DMA space
-		 *    but only sync a small portion of it. Good example is
-		 *    allocating a large buffer, mapping it, and then
-		 *    breaking it up into small descriptors. No point
-		 *    in syncing the whole buffer if you only have to
-		 *    touch one descriptor.
-		 *
-		 * 2) Buffers that are mapped as DMA_BIDIRECTIONAL are
-		 *    usually only synced in one dir at a time.
-		 *
-		 * See drivers/net/eepro100.c for examples of both cases.
-		 *
-		 * -ds
-		 *
-		 * BUG_ON(buf->size != size);
-		 * BUG_ON(buf->direction != dir);
-		 */
-
-		dev_dbg(dev,
-			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
-			buf->safe, buf->safe_dma_addr);
-
-		DO_STATS ( device_info->bounce_count++ );
-
-		switch (dir) {
-		case DMA_FROM_DEVICE:
-			dev_dbg(dev,
-				"%s: copy back safe %p to unsafe %p size %d\n",
-				__func__, buf->safe, buf->ptr, size);
-			memcpy(buf->ptr, buf->safe, size);
-			break;
-		case DMA_TO_DEVICE:
-			dev_dbg(dev,
-				"%s: copy out unsafe %p to safe %p, size %d\n",
-				__func__,buf->ptr, buf->safe, size);
-			memcpy(buf->safe, buf->ptr, size);
-			break;
-		case DMA_BIDIRECTIONAL:
-			BUG();	/* is this allowed?  what does it mean? */
-		default:
-			BUG();
-		}
-		/*
-		 * No need to sync the safe buffer - it was allocated
-		 * via the coherent allocators.
-		 */
-		return 0;
-	} else {
-		return 1;
+		free_safe_buffer(dev->archdata.dmabounce, buf);
 	}
 }
 
@@ -396,21 +329,29 @@ static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
  * substitute the safe buffer for the unsafe one.
  * (basically move the buffer from an unsafe area to a safe one)
  */
-dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 		enum dma_data_direction dir)
 {
-	dma_addr_t dma_addr;
-
 	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
 		__func__, ptr, size, dir);
 
-	BUG_ON(dir == DMA_NONE);
+	BUG_ON(!valid_dma_direction(dir));
 
-	dma_addr = map_single(dev, ptr, size, dir);
+	return map_single(dev, ptr, size, dir);
+}
+EXPORT_SYMBOL(dma_map_single);
 
-	return dma_addr;
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size, enum dma_data_direction dir)
+{
+	dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n",
+		__func__, page, offset, size, dir);
+
+	BUG_ON(!valid_dma_direction(dir));
+
+	return map_single(dev, page_address(page) + offset, size, dir);
 }
+EXPORT_SYMBOL(dma_map_page);
 
 /*
  * see if a mapped address was really a "safe" buffer and if so, copy
@@ -419,126 +360,76 @@ dma_map_single(struct device *dev, void *ptr, size_t size,
  * should be)
  */
 
-void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-			enum dma_data_direction dir)
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		enum dma_data_direction dir)
 {
 	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
 		__func__, (void *) dma_addr, size, dir);
 
-	BUG_ON(dir == DMA_NONE);
-
 	unmap_single(dev, dma_addr, size, dir);
 }
+EXPORT_SYMBOL(dma_unmap_single);
 
-int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction dir)
+int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
+		unsigned long off, size_t sz, enum dma_data_direction dir)
 {
-	int i;
-
-	dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
-		__func__, sg, nents, dir);
-
-	BUG_ON(dir == DMA_NONE);
-
-	for (i = 0; i < nents; i++, sg++) {
-		struct page *page = sg_page(sg);
-		unsigned int offset = sg->offset;
-		unsigned int length = sg->length;
-		void *ptr = page_address(page) + offset;
+	struct safe_buffer *buf;
 
-		sg->dma_address =
-			map_single(dev, ptr, length, dir);
-	}
+	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
+		__func__, addr, off, sz, dir);
 
-	return nents;
-}
-
-void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction dir)
-{
-	int i;
+	buf = find_safe_buffer_dev(dev, addr, __func__);
+	if (!buf)
+		return 1;
 
-	dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
-		__func__, sg, nents, dir);
+	BUG_ON(buf->direction != dir);
 
-	BUG_ON(dir == DMA_NONE);
+	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+		buf->safe, buf->safe_dma_addr);
 
-	for (i = 0; i < nents; i++, sg++) {
-		dma_addr_t dma_addr = sg->dma_address;
-		unsigned int length = sg->length;
+	DO_STATS(dev->archdata.dmabounce->bounce_count++);
 
-		unmap_single(dev, dma_addr, length, dir);
+	if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
+		dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
+			__func__, buf->safe + off, buf->ptr + off, sz);
+		memcpy(buf->ptr + off, buf->safe + off, sz);
 	}
+	return 0;
 }
+EXPORT_SYMBOL(dmabounce_sync_for_cpu);
 
-void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_addr,
-				   unsigned long offset, size_t size,
-				   enum dma_data_direction dir)
-{
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
-		__func__, dma_addr, offset, size, dir);
-
-	if (sync_single(dev, dma_addr, offset + size, dir))
-		dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
-}
-EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
-
-void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_addr,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction dir)
-{
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
-		__func__, dma_addr, offset, size, dir);
-
-	if (sync_single(dev, dma_addr, offset + size, dir))
-		dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
-}
-EXPORT_SYMBOL(dma_sync_single_range_for_device);
-
-void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
-			enum dma_data_direction dir)
+int dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
+		unsigned long off, size_t sz, enum dma_data_direction dir)
 {
-	int i;
-
-	dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
-		__func__, sg, nents, dir);
-
-	BUG_ON(dir == DMA_NONE);
+	struct safe_buffer *buf;
 
-	for (i = 0; i < nents; i++, sg++) {
-		dma_addr_t dma_addr = sg->dma_address;
-		unsigned int length = sg->length;
+	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
+		__func__, addr, off, sz, dir);
 
-		sync_single(dev, dma_addr, length, dir);
-	}
-}
-
-void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
-			enum dma_data_direction dir)
-{
-	int i;
+	buf = find_safe_buffer_dev(dev, addr, __func__);
+	if (!buf)
+		return 1;
 
-	dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
-		__func__, sg, nents, dir);
+	BUG_ON(buf->direction != dir);
 
-	BUG_ON(dir == DMA_NONE);
+	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+		buf->safe, buf->safe_dma_addr);
 
-	for (i = 0; i < nents; i++, sg++) {
-		dma_addr_t dma_addr = sg->dma_address;
-		unsigned int length = sg->length;
+	DO_STATS(dev->archdata.dmabounce->bounce_count++);
 
-		sync_single(dev, dma_addr, length, dir);
+	if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) {
+		dev_dbg(dev, "%s: copy out unsafe %p to safe %p, size %d\n",
+			__func__,buf->ptr + off, buf->safe + off, sz);
+		memcpy(buf->safe + off, buf->ptr + off, sz);
 	}
+	return 0;
 }
+EXPORT_SYMBOL(dmabounce_sync_for_device);
 
-static int
-dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char *name,
-		    unsigned long size)
+static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev,
+		const char *name, unsigned long size)
 {
 	pool->size = size;
 	DO_STATS(pool->allocs = 0);
@@ -549,9 +440,8 @@ dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char
 	return pool->pool ? 0 : -ENOMEM;
 }
 
-int
-dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
-			unsigned long large_buffer_size)
+int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
+		unsigned long large_buffer_size)
 {
 	struct dmabounce_device_info *device_info;
 	int ret;
@@ -607,9 +497,9 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 	kfree(device_info);
 	return ret;
 }
+EXPORT_SYMBOL(dmabounce_register_dev);
 
-void
-dmabounce_unregister_dev(struct device *dev)
+void dmabounce_unregister_dev(struct device *dev)
 {
 	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 
@@ -642,15 +532,6 @@ dmabounce_unregister_dev(struct device *dev)
 
 	dev_info(dev, "dmabounce: device unregistered\n");
 }
-
-
-EXPORT_SYMBOL(dma_map_single);
-EXPORT_SYMBOL(dma_unmap_single);
-EXPORT_SYMBOL(dma_map_sg);
-EXPORT_SYMBOL(dma_unmap_sg);
-EXPORT_SYMBOL(dma_sync_sg_for_cpu);
-EXPORT_SYMBOL(dma_sync_sg_for_device);
-EXPORT_SYMBOL(dmabounce_register_dev);
 EXPORT_SYMBOL(dmabounce_unregister_dev);
 
 MODULE_AUTHOR("Christopher Hoover <ch@hpl.hp.com>, Deepak Saxena <dsaxena@plexity.net>");
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 0c89bd3..7fc9860 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -27,9 +27,9 @@
 #include <linux/list.h>
 #include <linux/smp.h>
 #include <linux/cpumask.h>
+#include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 5fe9588..2793447 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -66,14 +66,6 @@ static void it8152_unmask_irq(unsigned int irq)
        }
 }
 
-static inline void it8152_irq(int irq)
-{
-	struct irq_desc *desc;
-
-	desc = irq_desc + irq;
-	desc_handle_irq(irq, desc);
-}
-
 static struct irq_chip it8152_irq_chip = {
 	.name		= "it8152",
 	.ack		= it8152_mask_irq,
@@ -128,21 +120,21 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 	       bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1);
 	       while (bits_pd) {
 		       i = __ffs(bits_pd);
-		       it8152_irq(IT8152_PD_IRQ(i));
+		       generic_handle_irq(IT8152_PD_IRQ(i));
 		       bits_pd &= ~(1 << i);
 	       }
 
 	       bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
 	       while (bits_lp) {
 		       i = __ffs(bits_lp);
-		       it8152_irq(IT8152_LP_IRQ(i));
+		       generic_handle_irq(IT8152_LP_IRQ(i));
 		       bits_lp &= ~(1 << i);
 	       }
 
 	       bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
 	       while (bits_ld) {
 		       i = __ffs(bits_ld);
-		       it8152_irq(IT8152_LD_IRQ(i));
+		       generic_handle_irq(IT8152_LD_IRQ(i));
 		       bits_ld &= ~(1 << i);
 	       }
        }
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 283051e..7c6b4b9 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -24,9 +24,9 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
@@ -169,7 +169,6 @@ static struct locomo_dev_info locomo_devices[] = {
 static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 {
 	int req, i;
-	struct irq_desc *d;
 	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	/* Acknowledge the parent IRQ */
@@ -181,10 +180,9 @@ static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 	if (req) {
 		/* generate the next interrupt(s) */
 		irq = LOCOMO_IRQ_START;
-		d = irq_desc + irq;
-		for (i = 0; i <= 3; i++, d++, irq++) {
+		for (i = 0; i <= 3; i++, irq++) {
 			if (req & (0x0100 << i)) {
-				desc_handle_irq(irq, d);
+				generic_handle_irq(irq);
 			}
 
 		}
@@ -222,12 +220,10 @@ static struct irq_chip locomo_chip = {
 
 static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
 {
-	struct irq_desc *d;
 	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
-		d = irq_desc + LOCOMO_IRQ_KEY_START;
-		desc_handle_irq(LOCOMO_IRQ_KEY_START, d);
+		generic_handle_irq(LOCOMO_IRQ_KEY_START);
 	}
 }
 
@@ -268,7 +264,6 @@ static struct irq_chip locomo_key_chip = {
 static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
 {
 	int req, i;
-	struct irq_desc *d;
 	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	req = 	locomo_readl(mapbase + LOCOMO_GIR) &
@@ -277,10 +272,9 @@ static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
 
 	if (req) {
 		irq = LOCOMO_IRQ_GPIO_START;
-		d = irq_desc + LOCOMO_IRQ_GPIO_START;
-		for (i = 0; i <= 15; i++, irq++, d++) {
+		for (i = 0; i <= 15; i++, irq++) {
 			if (req & (0x0001 << i)) {
-				desc_handle_irq(irq, d);
+				generic_handle_irq(irq);
 			}
 		}
 	}
@@ -361,12 +355,10 @@ static struct irq_chip locomo_gpio_chip = {
 
 static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
 {
-	struct irq_desc *d;
 	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
-		d = irq_desc + LOCOMO_IRQ_LT_START;
-		desc_handle_irq(LOCOMO_IRQ_LT_START, d);
+		generic_handle_irq(LOCOMO_IRQ_LT_START);
 	}
 }
 
@@ -407,17 +399,15 @@ static struct irq_chip locomo_lt_chip = {
 static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
 {
 	int req, i;
-	struct irq_desc *d;
 	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
 	if (req) {
 		irq = LOCOMO_IRQ_SPI_START;
-		d = irq_desc + irq;
 
-		for (i = 0; i <= 3; i++, irq++, d++) {
+		for (i = 0; i <= 3; i++, irq++) {
 			if (req & (0x0001 << i)) {
-				desc_handle_irq(irq, d);
+				generic_handle_irq(irq);
 			}
 		}
 	}
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index ec8a547..47ccec9 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -25,10 +25,10 @@
 #include <linux/spinlock.h>
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/sizes.h>
@@ -581,6 +581,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		goto out;
 	}
 
+#ifdef CONFIG_DMABOUNCE
 	/*
 	 * If the parent device has a DMA mask associated with it,
 	 * propagate it down to the children.
@@ -598,6 +599,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 			}
 		}
 	}
+#endif
 
 out:
 	return ret;
@@ -937,7 +939,7 @@ static int sa1111_resume(struct platform_device *dev)
 #define sa1111_resume  NULL
 #endif
 
-static int sa1111_probe(struct platform_device *pdev)
+static int __devinit sa1111_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int irq;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index ae39553..697c649 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -15,7 +15,7 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/gpio.h>
 #include <asm/hardware/scoop.h>
 
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index aad4d94..d56c932 100644
--- a/arch/arm/common/sharpsl_param.c
+++ b/arch/arm/common/sharpsl_param.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <asm/mach/sharpsl_param.h>
 
@@ -36,6 +37,7 @@
 #define PHAD_MAGIC	MAGIC_CHG('P','H','A','D')
 
 struct sharpsl_param_info sharpsl_param;
+EXPORT_SYMBOL(sharpsl_param);
 
 void sharpsl_save_param(void)
 {
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c
index df0983a..deeed56 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/common/time-acorn.c
@@ -17,9 +17,9 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/hardware/ioc.h>
 
 #include <asm/mach/time.h>
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
index 7ecd3c0..b520e56 100644
--- a/arch/arm/common/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -16,9 +16,9 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/string.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/hardware/uengine.h>
-#include <asm/io.h>
 
 #if defined(CONFIG_ARCH_IXP2000)
 #define IXP_UENGINE_CSR_VIRT_BASE	IXP2000_UENGINE_CSR_VIRT_BASE
diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c
index 79a8206..8421d39 100644
--- a/arch/arm/common/via82c505.c
+++ b/arch/arm/common/via82c505.c
@@ -4,8 +4,8 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index c026fa2..f1e4b8f 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -20,8 +20,8 @@
  */
 #include <linux/init.h>
 #include <linux/list.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
new file mode 100644
index 0000000..ce90958
--- /dev/null
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -0,0 +1,1259 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc2
+# Tue Aug 12 22:30:16 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+CONFIG_MACH_AFEB9260=y
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_ATMEL_TCLIB is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_DEBUG=y
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_FM3130=y
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 1c76642..811bebb 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -496,6 +496,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_INPUT_MISC is not set
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
new file mode 100644
index 0000000..46f1c9d
--- /dev/null
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -0,0 +1,1466 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc3
+# Tue Aug 19 11:26:54 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-cm-x300"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+# CONFIG_CPU_PXA320 is not set
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_MACH_CM_X300=y
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=0
+CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_PXA2XX_SOC=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 9b8748a..f3af0b5 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -1,71 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Mon Nov 28 10:30:09 2005
+# Linux kernel version: 2.6.27
+# Mon Oct 20 10:12:23 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -79,50 +119,97 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
-CONFIG_PXA_SHARPSL_25x=y
-# CONFIG_PXA_SHARPSL_27x is not set
 CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
 CONFIG_MACH_SHEPHERD=y
 CONFIG_MACH_HUSKY=y
+# CONFIG_MACH_AKITA is not set
+# CONFIG_MACH_SPITZ is not set
+# CONFIG_MACH_BORZOI is not set
 CONFIG_MACH_TOSA=y
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA25x=y
 CONFIG_PXA_SHARP_C7xx=y
 CONFIG_PXA_SSP=y
+# CONFIG_PXA_PWM is not set
+# CONFIG_TOSA_BT is not set
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
 # Processor Type
@@ -131,25 +218,30 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
 CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_IWMMXT is not set
 CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_LOCOMO=y
 CONFIG_SHARP_PARAM=y
+CONFIG_SHARPSL_PM=y
 CONFIG_SHARP_SCOOP=y
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -164,16 +256,32 @@ CONFIG_PCMCIA_PXA2XX=y
 #
 # Kernel Features
 #
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -183,6 +291,13 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -199,6 +314,7 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 # CONFIG_ARTHUR is not set
@@ -207,12 +323,12 @@ CONFIG_BINFMT_MISC=m
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Networking
-#
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -223,6 +339,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -236,140 +356,131 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
 CONFIG_IP_NF_FILTER=m
 # CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
 # CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_DSCP is not set
-# CONFIG_IP_NF_TARGET_MARK is not set
-# CONFIG_IP_NF_TARGET_CLASSIFY is not set
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_TARGET_NOTRACK is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
 # CONFIG_IP6_NF_TARGET_LOG is not set
+CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_MARK is not set
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -377,21 +488,16 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
@@ -421,27 +527,17 @@ CONFIG_IRCOMM=m
 #
 # Dongle support
 #
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
 
 #
 # FIR device drivers
 #
 # CONFIG_USB_IRDA is not set
 # CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VIA_FIR is not set
 CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -457,9 +553,12 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 # CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -468,11 +567,20 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 # CONFIG_IEEE80211_CRYPT_CCMP is not set
 # CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -481,19 +589,16 @@ CONFIG_IEEE80211_CRYPT_WEP=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -501,16 +606,20 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -535,16 +644,18 @@ CONFIG_MTD_ROM=y
 # Mapping drivers for chip access
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_SHARP_SL=y
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -553,78 +664,66 @@ CONFIG_MTD_SHARP_SL=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -644,121 +743,76 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
+# Wireless LAN
 #
-# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_CS=m
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
+# USB Network Adapters
 #
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -768,10 +822,6 @@ CONFIG_PCMCIA_PCNET=m
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -782,30 +832,29 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -814,19 +863,39 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_LOCOMO is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_CORGI=y
 CONFIG_KEYBOARD_SPITZ=y
+CONFIG_KEYBOARD_TOSA=y
+# CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_CORGI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
 
 #
@@ -839,8 +908,11 @@ CONFIG_INPUT_UINPUT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -849,6 +921,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -860,97 +933,130 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-
-#
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
 # CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
 
 #
-# Hardware Monitoring support
+# SPI Master Controller Drivers
 #
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -960,70 +1066,193 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+CONFIG_SENSORS_MAX1111=y
 # CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
 #
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
 
 #
-# Video Adapters
+# Multimedia core support
 #
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
 # CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
 # CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_VIDEO_AUDIO_DECODER is not set
-# CONFIG_VIDEO_DECODER is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_PXA is not set
+# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_CORGI=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_LOCOMO=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -1031,6 +1260,7 @@ CONFIG_FB_W100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
@@ -1043,93 +1273,95 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+# CONFIG_SND is not set
+CONFIG_SOUND_PRIME=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Advanced Linux Sound Architecture
+# USB Input Devices
 #
-# CONFIG_SND is not set
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# Open Sound System
+# USB HID Boot Protocol drivers
 #
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-CONFIG_SOUND_OSS=y
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_SGALAXY is not set
-# CONFIG_SOUND_ADLIB is not set
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_WAVEFRONT is not set
-# CONFIG_SOUND_MAUI is not set
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
 #
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1148,33 +1380,11 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-CONFIG_USB_MTOUCH=m
-# CONFIG_USB_ITMTOUCH is not set
-CONFIG_USB_EGALAX=m
-# CONFIG_USB_YEALINK is not set
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
@@ -1183,56 +1393,22 @@ CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
 
 #
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_PWC is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
 # CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1240,6 +1416,7 @@ CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
@@ -1257,50 +1434,68 @@ CONFIG_USB_SERIAL_KEYSPAN=m
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 # CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
 #
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=y
+# CONFIG_USB_PXA25X_SMALL is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
@@ -1310,15 +1505,42 @@ CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card support
+# MMC/SD/SDIO Card Drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1327,16 +1549,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1361,11 +1584,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1377,39 +1602,42 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
 # CONFIG_JFFS2_CMODE_NONE is not set
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1419,7 +1647,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1439,11 +1666,9 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1484,35 +1709,71 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1521,46 +1782,113 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 0c55628..81fadaf 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,84 +1,174 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:10:35 2005
+# Linux kernel version: 2.6.27-rc6
+# Tue Sep 16 18:56:58 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_MSM7X00A is not set
+CONFIG_DMABOUNCE=y
 
 #
 # SA11x0 Implementations
@@ -91,12 +181,21 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 CONFIG_SA1100_JORNADA720=y
+CONFIG_SA1100_JORNADA720_SSP=y
 # CONFIG_SA1100_HACKKIT is not set
 # CONFIG_SA1100_LART is not set
 # CONFIG_SA1100_PLEB is not set
 # CONFIG_SA1100_SHANNON is not set
 # CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
+CONFIG_SA1100_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
 # Processor Type
@@ -105,44 +204,71 @@ CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WB=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
 CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
 CONFIG_FORCE_MAX_ZONEORDER=9
 
 #
 # Bus support
 #
 CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
 #
-CONFIG_I82365=y
+# CONFIG_I82365 is not set
 # CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
 # CONFIG_PCMCIA_SA1111 is not set
-CONFIG_PCCARD_NONSTATIC=y
 
 #
 # Kernel Features
 #
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_NODES_SHIFT=2
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -151,8 +277,9 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd mem=32M"
+CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
 # CPU Frequency scaling
@@ -174,7 +301,7 @@ CONFIG_FPE_FASTFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
 
@@ -182,188 +309,12 @@ CONFIG_BINFMT_AOUT=m
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -371,12 +322,17 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -386,31 +342,42 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -420,30 +387,22 @@ CONFIG_NETFILTER=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
 # IrDA protocols
 #
 CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
 CONFIG_IRCOMM=m
 # CONFIG_IRDA_ULTRA is not set
 
@@ -468,89 +427,105 @@ CONFIG_IRCOMM=m
 #
 
 #
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
 # FIR device drivers
 #
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless
 #
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
+# Device Drivers
 #
-CONFIG_NET_RADIO=y
 
 #
-# Obsolete Wireless cards support (pre-802.11)
+# Generic Driver Options
 #
-# CONFIG_STRIP is not set
-CONFIG_ARLAN=m
-CONFIG_WAVELAN=m
-CONFIG_PCMCIA_WAVELAN=m
-# CONFIG_PCMCIA_NETWAVE is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
 
 #
-# Wireless 802.11 Frequency Hopping cards support
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
-# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
-# Wireless 802.11b ISA/PCI cards support
+# IDE chipset support/bugfixes
 #
-CONFIG_HERMES=m
-# CONFIG_ATMEL is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
-# Wireless 802.11b Pcmcia/Cardbus cards support
+# SCSI device support
 #
-CONFIG_PCMCIA_HERMES=m
-CONFIG_AIRO_CS=m
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_NET_WIRELESS=y
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=m
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
-# PCMCIA network device support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
@@ -560,32 +535,20 @@ CONFIG_PCMCIA_NMCLAN=m
 CONFIG_PCMCIA_SMC91C92=m
 CONFIG_PCMCIA_XIRC2PS=m
 CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -595,7 +558,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -603,20 +565,31 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_HP7XX=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_HP7XX=y
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -625,17 +598,18 @@ CONFIG_MOUSE_PS2=y
 CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_SA1111 is not set
-CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -652,69 +626,120 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
 
 #
-# IPMI
+# PCMCIA character devices
 #
-# CONFIG_IPMI_HANDLER is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Watchdog Cards
+# I2C GPIO expanders:
 #
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
+# PCI GPIO expanders:
 #
-# CONFIG_DRM is not set
 
 #
-# PCMCIA character devices
+# SPI GPIO expanders:
 #
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# TPM devices
+# Sonics Silicon Backplane
 #
-# CONFIG_TCG_TPM is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# I2C support
+# Multifunction device drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
 
 #
-# Misc devices
+# Multimedia Capabilities Port drivers
 #
+# CONFIG_MCP_SA11X0 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_SA1100 is not set
+CONFIG_FB_S1D13XXX=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -722,94 +747,110 @@ CONFIG_FB=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# Advanced Linux Sound Architecture
+# RTC interfaces
 #
-# CONFIG_SND is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# Open Sound System
+# SPI RTC drivers
 #
-# CONFIG_SOUND_PRIME is not set
 
 #
-# USB support
+# Platform RTC drivers
 #
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# USB Gadget Support
+# on-CPU RTC drivers
 #
-# CONFIG_USB_GADGET is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
 
 #
-# MMC/SD Card support
+# Voltage and Current regulators
 #
-# CONFIG_MMC is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=m
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
+# CONFIG_ISO9660_FS is not set
 # CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-CONFIG_DEVFS_DEBUG=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -821,75 +862,122 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=2
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -898,21 +986,100 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
 
 #
-# Cryptographic options
+# Ciphers
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index ae4c5e6..3b4ecf2 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -133,7 +133,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_MSM7X00A=y
+CONFIG_ARCH_MSM=y
 
 #
 # Boot options
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
new file mode 100644
index 0000000..e042d27
--- /dev/null
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -0,0 +1,1321 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc8
+# Wed Oct  1 17:14:22 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
new file mode 100644
index 0000000..948a212
--- /dev/null
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -0,0 +1,1044 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 10 11:49:41 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+CONFIG_MACH_OMAP_LDP=y
+# CONFIG_MACH_OVERO is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 4017d83..b2456ca 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -176,14 +176,17 @@ CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
 CONFIG_MACH_TS209=y
 CONFIG_MACH_LINKSTATION_PRO=y
+CONFIG_MACH_LINKSTATION_MINI=y
 CONFIG_MACH_TS409=y
 CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
+CONFIG_MACH_EDMINI_V2=y
 CONFIG_MACH_MSS2=y
 CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
 CONFIG_MACH_RD88F5181L_FXO=y
+CONFIG_MACH_RD88F6183AP_GE=y
 
 #
 # Boot options
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
new file mode 100644
index 0000000..4920096
--- /dev/null
+++ b/arch/arm/configs/overo_defconfig
@@ -0,0 +1,1885 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc8
+# Fri Oct  3 11:50:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+CONFIG_MACH_OVERO=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_93CX6=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_CX2341X=m
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+# CONFIG_USB_ET61X251 is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_CINERGYT2=m
+# CONFIG_DVB_CINERGYT2_TUNING is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+# CONFIG_DVB_ISL6405 is not set
+CONFIG_DVB_ISL6421=m
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
new file mode 100644
index 0000000..3245f8f
--- /dev/null
+++ b/arch/arm/configs/palmz72_defconfig
@@ -0,0 +1,951 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Sun Aug 24 02:29:27 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_ARCH_PXA_PALM=y
+# CONFIG_MACH_PALMTX is not set
+CONFIG_MACH_PALMZ72=y
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_PXA is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 7d59fb1..4df5b4d 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,71 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Mon Nov 28 10:26:52 2005
+# Linux kernel version: 2.6.27
+# Mon Oct 20 10:25:37 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -79,49 +119,95 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
-# CONFIG_PXA_SHARPSL_25x is not set
-CONFIG_PXA_SHARPSL_27x=y
+# CONFIG_MACH_POODLE is not set
+# CONFIG_MACH_CORGI is not set
+# CONFIG_MACH_SHEPHERD is not set
+# CONFIG_MACH_HUSKY is not set
 CONFIG_MACH_AKITA=y
 CONFIG_MACH_SPITZ=y
 CONFIG_MACH_BORZOI=y
+# CONFIG_MACH_TOSA is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA27x=y
-CONFIG_IWMMXT=y
 CONFIG_PXA_SHARP_Cxx00=y
 CONFIG_PXA_SSP=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
 # Processor Type
@@ -130,25 +216,29 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
 CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
 CONFIG_SHARP_PARAM=y
+CONFIG_SHARPSL_PM=y
 CONFIG_SHARP_SCOOP=y
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -163,16 +253,32 @@ CONFIG_PCMCIA_PXA2XX=y
 #
 # Kernel Features
 #
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -182,6 +288,13 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -198,6 +311,7 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 # CONFIG_ARTHUR is not set
@@ -206,12 +320,12 @@ CONFIG_BINFMT_MISC=m
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Networking
-#
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -222,6 +336,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -235,140 +353,131 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
 CONFIG_IP_NF_FILTER=m
 # CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
 # CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_DSCP is not set
-# CONFIG_IP_NF_TARGET_MARK is not set
-# CONFIG_IP_NF_TARGET_CLASSIFY is not set
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_TARGET_NOTRACK is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
 # CONFIG_IP6_NF_TARGET_LOG is not set
+CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_MARK is not set
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -376,21 +485,16 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
@@ -420,27 +524,17 @@ CONFIG_IRCOMM=m
 #
 # Dongle support
 #
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
 
 #
 # FIR device drivers
 #
 # CONFIG_USB_IRDA is not set
 # CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VIA_FIR is not set
 CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -456,9 +550,12 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 # CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -467,11 +564,20 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 # CONFIG_IEEE80211_CRYPT_CCMP is not set
 # CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -480,19 +586,16 @@ CONFIG_IEEE80211_CRYPT_WEP=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -500,16 +603,20 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -534,16 +641,18 @@ CONFIG_MTD_ROM=y
 # Mapping drivers for chip access
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_SHARP_SL=y
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -552,78 +661,66 @@ CONFIG_MTD_SHARP_SL=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -643,121 +740,76 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_CS=m
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
+# USB Network Adapters
 #
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -767,10 +819,6 @@ CONFIG_PCMCIA_PCNET=m
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -781,31 +829,29 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_POWER is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -816,17 +862,35 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_CORGI is not set
 CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_CORGI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
 
 #
@@ -839,8 +903,11 @@ CONFIG_INPUT_UINPUT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -849,6 +916,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -860,101 +928,253 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-
-#
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
 # CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
-# Hardware Monitoring support
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+CONFIG_SENSORS_MAX1111=y
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
 # CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_CORGI=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -962,6 +1182,7 @@ CONFIG_FB_PXA=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
@@ -974,55 +1195,96 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Logo configuration
+# USB Input Devices
 #
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# Sound
+# USB HID Boot Protocol drivers
 #
-# CONFIG_SOUND is not set
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
 
 #
-# USB support
-#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1041,33 +1303,11 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-CONFIG_USB_MTOUCH=m
-# CONFIG_USB_ITMTOUCH is not set
-CONFIG_USB_EGALAX=m
-# CONFIG_USB_YEALINK is not set
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
@@ -1076,51 +1316,22 @@ CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
 
 #
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
 # CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1128,6 +1339,7 @@ CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
@@ -1145,49 +1357,66 @@ CONFIG_USB_SERIAL_KEYSPAN=m
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 # CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 # CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
 #
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
 CONFIG_USB_DUMMY_HCD=m
 CONFIG_USB_GADGET_DUALSPEED=y
@@ -1198,15 +1427,42 @@ CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card support
+# MMC/SD/SDIO Card Drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1218,18 +1474,19 @@ CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1254,11 +1511,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1270,39 +1529,42 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
 # CONFIG_JFFS2_CMODE_NONE is not set
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1312,7 +1574,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1332,11 +1593,9 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1377,35 +1636,71 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1414,46 +1709,113 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 8b7a431..9033d14 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -147,6 +147,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4=y
 CONFIG_MACH_TRIZEPS4_CONXS=y
 # CONFIG_MACH_TRIZEPS4_ANY is not set
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
new file mode 100644
index 0000000..d01fecb
--- /dev/null
+++ b/arch/arm/configs/viper_defconfig
@@ -0,0 +1,1678 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 17:12:07 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=13
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_ARCH_VIPER=y
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA25x=y
+CONFIG_PXA_PWM=m
+CONFIG_PXA_HAVE_ISA_IRQS=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PCMCIA_PROBE=y
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_PXA=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_FASTFPE=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+# CONFIG_BT_SCO is not set
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+CONFIG_MTD_SPARSE_RAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_LEGACY is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_FUJITSU=m
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=5
+CONFIG_SERIAL_8250_RUNTIME_UARTS=5
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SA1100_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=m
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=m
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_PCMCIA=y
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_ISP116X_HCD=m
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_CS is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=m
+# CONFIG_USB_PXA25X_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/xm_x270_defconfig b/arch/arm/configs/xm_x270_defconfig
deleted file mode 100644
index aa40d91..0000000
--- a/arch/arm/configs/xm_x270_defconfig
+++ /dev/null
@@ -1,1741 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sun May 11 15:12:52 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Select target boards
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_MACH_EM_X270=y
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-CONFIG_MACH_ARMCORE=y
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_ITE8152=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
-# CONFIG_YENTA_ENE_TUNE is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=m
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
-CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_CAFE is not set
-CONFIG_MTD_NAND_CM_X270=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_SMC911X is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBERTAS_CS is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-# CONFIG_DEBUG_GPIO is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_FB_MBX=m
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LEDS_CM_X270=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/xm_x2xx_defconfig
new file mode 100644
index 0000000..f891364
--- /dev/null
+++ b/arch/arm/configs/xm_x2xx_defconfig
@@ -0,0 +1,1806 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc8
+# Sun Oct  5 11:05:36 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+CONFIG_DMABOUNCE=y
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+CONFIG_MACH_EM_X270=y
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+CONFIG_MACH_ARMCORE=y
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA25x=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_HOST_ITE8152=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_ENE_TUNE is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PCCARD_NONSTATIC=m
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 mem=32M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=m
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+# CONFIG_BT_RFCOMM_TTY is not set
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_GPIO=m
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_CAFE is not set
+CONFIG_MTD_NAND_CM_X270=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=1
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_SMC911X is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBERTAS_CS is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_FB_MBX=m
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_PCMCIA=y
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_CM_X270=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+CONFIG_RTC_DRV_V3020=y
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index 7b62351..4d88425 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -12,7 +12,7 @@ extern void __bug(const char *file, int line) __attribute__((noreturn));
 #else
 
 /* this just causes an oops */
-#define BUG()		(*(int *)0 = 0)
+#define BUG()		do { *(int *)0 = 0; } while (1)
 
 #endif
 
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 9073d9c..de6c59f 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -444,94 +444,4 @@ static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
 	dmac_inv_range(start, start + size);
 }
 
-#define __cacheid_present(val)			(val != read_cpuid(CPUID_ID))
-#define __cacheid_type_v7(val)			((val & (7 << 29)) == (4 << 29))
-
-#define __cacheid_vivt_prev7(val)		((val & (15 << 25)) != (14 << 25))
-#define __cacheid_vipt_prev7(val)		((val & (15 << 25)) == (14 << 25))
-#define __cacheid_vipt_nonaliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25))
-#define __cacheid_vipt_aliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23))
-
-#define __cacheid_vivt(val)			(__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val))
-#define __cacheid_vipt(val)			(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val))
-#define __cacheid_vipt_nonaliasing(val)		(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val))
-#define __cacheid_vipt_aliasing(val)		(__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val))
-#define __cacheid_vivt_asid_tagged_instr(val)	(__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0)
-
-#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
-/*
- * VIVT caches only
- */
-#define cache_is_vivt()			1
-#define cache_is_vipt()			0
-#define cache_is_vipt_nonaliasing()	0
-#define cache_is_vipt_aliasing()	0
-#define icache_is_vivt_asid_tagged()	0
-
-#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
-/*
- * VIPT caches only
- */
-#define cache_is_vivt()			0
-#define cache_is_vipt()			1
-#define cache_is_vipt_nonaliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_vipt_nonaliasing(__val);			\
-	})
-
-#define cache_is_vipt_aliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_vipt_aliasing(__val);				\
-	})
-
-#define icache_is_vivt_asid_tagged()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_vivt_asid_tagged_instr(__val);		\
-	})
-
-#else
-/*
- * VIVT or VIPT caches.  Note that this is unreliable since ARM926
- * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test.
- * There's no way to tell from the CacheType register what type (!)
- * the cache is.
- */
-#define cache_is_vivt()							\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		(!__cacheid_present(__val)) || __cacheid_vivt(__val);	\
-	})
-		
-#define cache_is_vipt()							\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) && __cacheid_vipt(__val);	\
-	})
-
-#define cache_is_vipt_nonaliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) &&				\
-		 __cacheid_vipt_nonaliasing(__val);			\
-	})
-
-#define cache_is_vipt_aliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) &&				\
-		 __cacheid_vipt_aliasing(__val);			\
-	})
-
-#define icache_is_vivt_asid_tagged()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) &&				\
-		 __cacheid_vivt_asid_tagged_instr(__val);		\
-	})
-
-#endif
-
 #endif
diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h
new file mode 100644
index 0000000..d3a4c2c
--- /dev/null
+++ b/arch/arm/include/asm/cachetype.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_ARM_CACHETYPE_H
+#define __ASM_ARM_CACHETYPE_H
+
+#define CACHEID_VIVT			(1 << 0)
+#define CACHEID_VIPT_NONALIASING	(1 << 1)
+#define CACHEID_VIPT_ALIASING		(1 << 2)
+#define CACHEID_VIPT			(CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING)
+#define CACHEID_ASID_TAGGED		(1 << 3)
+
+extern unsigned int cacheid;
+
+#define cache_is_vivt()			cacheid_is(CACHEID_VIVT)
+#define cache_is_vipt()			cacheid_is(CACHEID_VIPT)
+#define cache_is_vipt_nonaliasing()	cacheid_is(CACHEID_VIPT_NONALIASING)
+#define cache_is_vipt_aliasing()	cacheid_is(CACHEID_VIPT_ALIASING)
+#define icache_is_vivt_asid_tagged()	cacheid_is(CACHEID_ASID_TAGGED)
+
+/*
+ * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture
+ * Mask out support which will never be present on newer CPUs.
+ * - v6+ is never VIVT
+ * - v7+ VIPT never aliases
+ */
+#if __LINUX_ARM_ARCH__ >= 7
+#define __CACHEID_ARCH_MIN	(CACHEID_VIPT_NONALIASING | CACHEID_ASID_TAGGED)
+#elif __LINUX_ARM_ARCH__ >= 6
+#define	__CACHEID_ARCH_MIN	(~CACHEID_VIVT)
+#else
+#define __CACHEID_ARCH_MIN	(~0)
+#endif
+
+/*
+ * Mask out support which isn't configured
+ */
+#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
+#define __CACHEID_ALWAYS	(CACHEID_VIVT)
+#define __CACHEID_NEVER		(~CACHEID_VIVT)
+#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
+#define __CACHEID_ALWAYS	(0)
+#define __CACHEID_NEVER		(CACHEID_VIVT)
+#else
+#define __CACHEID_ALWAYS	(0)
+#define __CACHEID_NEVER		(0)
+#endif
+
+static inline unsigned int __attribute__((pure)) cacheid_is(unsigned int mask)
+{
+	return (__CACHEID_ALWAYS & mask) |
+	       (~__CACHEID_NEVER & __CACHEID_ARCH_MIN & mask & cacheid);
+}
+
+#endif
diff --git a/arch/arm/include/asm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h
deleted file mode 100644
index 480c873..0000000
--- a/arch/arm/include/asm/cnt32_to_63.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits
- *
- *  Author:	Nicolas Pitre
- *  Created:	December 3, 2006
- *  Copyright:	MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- */
-
-#ifndef __INCLUDE_CNT32_TO_63_H__
-#define __INCLUDE_CNT32_TO_63_H__
-
-#include <linux/compiler.h>
-#include <asm/types.h>
-#include <asm/byteorder.h>
-
-/*
- * Prototype: u64 cnt32_to_63(u32 cnt)
- * Many hardware clock counters are only 32 bits wide and therefore have
- * a relatively short period making wrap-arounds rather frequent.  This
- * is a problem when implementing sched_clock() for example, where a 64-bit
- * non-wrapping monotonic value is expected to be returned.
- *
- * To overcome that limitation, let's extend a 32-bit counter to 63 bits
- * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
- * by the hardware while bits 32 to 62 are stored in memory.  The top bit in
- * memory is used to synchronize with the hardware clock half-period.  When
- * the top bit of both counters (hardware and in memory) differ then the
- * memory is updated with a new value, incrementing it when the hardware
- * counter wraps around.
- *
- * Because a word store in memory is atomic then the incremented value will
- * always be in synch with the top bit indicating to any potential concurrent
- * reader if the value in memory is up to date or not with regards to the
- * needed increment.  And any race in updating the value in memory is harmless
- * as the same value would simply be stored more than once.
- *
- * The only restriction for the algorithm to work properly is that this
- * code must be executed at least once per each half period of the 32-bit
- * counter to properly update the state bit in memory. This is usually not a
- * problem in practice, but if it is then a kernel timer could be scheduled
- * to manage for this code to be executed often enough.
- *
- * Note that the top bit (bit 63) in the returned value should be considered
- * as garbage.  It is not cleared here because callers are likely to use a
- * multiplier on the returned value which can get rid of the top bit
- * implicitly by making the multiplier even, therefore saving on a runtime
- * clear-bit instruction. Otherwise caller must remember to clear the top
- * bit explicitly.
- */
-
-/* this is used only to give gcc a clue about good code generation */
-typedef union {
-	struct {
-#if defined(__LITTLE_ENDIAN)
-		u32 lo, hi;
-#elif defined(__BIG_ENDIAN)
-		u32 hi, lo;
-#endif
-	};
-	u64 val;
-} cnt32_to_63_t;
-
-#define cnt32_to_63(cnt_lo) \
-({ \
-	static volatile u32 __m_cnt_hi = 0; \
-	cnt32_to_63_t __x; \
-	__x.hi = __m_cnt_hi; \
-	__x.lo = (cnt_lo); \
- 	if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
-		__m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
-	__x.val; \
-})
-
-#endif
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
new file mode 100644
index 0000000..7b9d27e
--- /dev/null
+++ b/arch/arm/include/asm/cputype.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_ARM_CPUTYPE_H
+#define __ASM_ARM_CPUTYPE_H
+
+#include <linux/stringify.h>
+
+#define CPUID_ID	0
+#define CPUID_CACHETYPE	1
+#define CPUID_TCM	2
+#define CPUID_TLBTYPE	3
+
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg)							\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
+/*
+ * The CPU ID never changes at run time, so we might as well tell the
+ * compiler that it's constant.  Use this function to read the CPU ID
+ * rather than directly reading processor_id or read_cpuid() directly.
+ */
+static inline unsigned int __attribute_const__ read_cpuid_id(void)
+{
+	return read_cpuid(CPUID_ID);
+}
+
+static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
+{
+	return read_cpuid(CPUID_CACHETYPE);
+}
+
+/*
+ * Intel's XScale3 core supports some v6 features (supersections, L2)
+ * but advertises itself as v5 as it does not support the v6 ISA.  For
+ * this reason, we need a way to explicitly test for this type of CPU.
+ */
+#ifndef CONFIG_CPU_XSC3
+#define cpu_is_xsc3()	0
+#else
+static inline int cpu_is_xsc3(void)
+{
+	if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
+		return 1;
+
+	return 0;
+}
+#endif
+
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
+#define	cpu_is_xscale()	0
+#else
+#define	cpu_is_xscale()	1
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
index 5001390..d3f0a9e 100644
--- a/arch/arm/include/asm/div64.h
+++ b/arch/arm/include/asm/div64.h
@@ -165,7 +165,7 @@
 			__res = __m;					\
 			asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"		\
 				"mov	%Q0, #0"			\
-				: "+r" (__res)				\
+				: "+&r" (__res)				\
 				: "r" (__m), "r" (__n)			\
 				: "cc" );				\
 		} else {						\
@@ -182,7 +182,7 @@
 				"umlal	%R0, %Q0, %Q1, %R2\n\t"		\
 				"mov	%R0, #0\n\t"			\
 				"umlal	%Q0, %R0, %R1, %R2"		\
-				: "+r" (__res)				\
+				: "+&r" (__res)				\
 				: "r" (__m), "r" (__n)			\
 				: "cc" );				\
 		} else {						\
@@ -192,7 +192,7 @@
 				"adds	%Q0, %1, %Q0\n\t"		\
 				"adc	%R0, %R0, #0\n\t"		\
 				"umlal	%Q0, %R0, %R2, %R3"		\
-				: "+r" (__res), "+r" (__z)		\
+				: "+&r" (__res), "+&r" (__z)		\
 				: "r" (__m), "r" (__n)			\
 				: "cc" );				\
 		}							\
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 7b95d20..1cb8602 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -104,15 +104,14 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
  * Dummy noncoherent implementation.  We don't provide a dma_cache_sync
  * function so drivers using this API are highlighted with build warnings.
  */
-static inline void *
-dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
+		dma_addr_t *handle, gfp_t gfp)
 {
 	return NULL;
 }
 
-static inline void
-dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
-		     dma_addr_t handle)
+static inline void dma_free_noncoherent(struct device *dev, size_t size,
+		void *cpu_addr, dma_addr_t handle)
 {
 }
 
@@ -127,8 +126,7 @@ dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
  * return the CPU-viewed address, and sets @handle to be the
  * device-viewed address.
  */
-extern void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
+extern void *dma_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
 
 /**
  * dma_free_coherent - free memory allocated by dma_alloc_coherent
@@ -143,9 +141,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf
  * References to memory and mappings associated with cpu_addr/handle
  * during and after this call executing are illegal.
  */
-extern void
-dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
-		  dma_addr_t handle);
+extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t);
 
 /**
  * dma_mmap_coherent - map a coherent DMA allocation into user space
@@ -159,8 +155,8 @@ dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
  * into user space.  The coherent DMA buffer must not be freed by the
  * driver until the user space mapping has been released.
  */
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
-		      void *cpu_addr, dma_addr_t handle, size_t size);
+int dma_mmap_coherent(struct device *, struct vm_area_struct *,
+		void *, dma_addr_t, size_t);
 
 
 /**
@@ -174,14 +170,94 @@ int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
  * return the CPU-viewed address, and sets @handle to be the
  * device-viewed address.
  */
-extern void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
+extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *,
+		gfp_t);
 
 #define dma_free_writecombine(dev,size,cpu_addr,handle) \
 	dma_free_coherent(dev,size,cpu_addr,handle)
 
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
-			  void *cpu_addr, dma_addr_t handle, size_t size);
+int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
+		void *, dma_addr_t, size_t);
+
+
+#ifdef CONFIG_DMABOUNCE
+/*
+ * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
+ * and utilize bounce buffers as needed to work around limited DMA windows.
+ *
+ * On the SA-1111, a bug limits DMA to only certain regions of RAM.
+ * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
+ * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
+ *
+ * The following are helper functions used by the dmabounce subystem
+ *
+ */
+
+/**
+ * dmabounce_register_dev
+ *
+ * @dev: valid struct device pointer
+ * @small_buf_size: size of buffers to use with small buffer pool
+ * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
+ *
+ * This function should be called by low-level platform code to register
+ * a device as requireing DMA buffer bouncing. The function will allocate
+ * appropriate DMA pools for the device.
+ *
+ */
+extern int dmabounce_register_dev(struct device *, unsigned long,
+		unsigned long);
+
+/**
+ * dmabounce_unregister_dev
+ *
+ * @dev: valid struct device pointer
+ *
+ * This function should be called by low-level platform code when device
+ * that was previously registered with dmabounce_register_dev is removed
+ * from the system.
+ *
+ */
+extern void dmabounce_unregister_dev(struct device *);
+
+/**
+ * dma_needs_bounce
+ *
+ * @dev: valid struct device pointer
+ * @dma_handle: dma_handle of unbounced buffer
+ * @size: size of region being mapped
+ *
+ * Platforms that utilize the dmabounce mechanism must implement
+ * this function.
+ *
+ * The dmabounce routines call this function whenever a dma-mapping
+ * is requested to determine whether a given buffer needs to be bounced
+ * or not. The function must return 0 if the buffer is OK for
+ * DMA access and 1 if the buffer needs to be bounced.
+ *
+ */
+extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
+
+/*
+ * The DMA API, implemented by dmabounce.c.  See below for descriptions.
+ */
+extern dma_addr_t dma_map_single(struct device *, void *, size_t,
+		enum dma_data_direction);
+extern dma_addr_t dma_map_page(struct device *, struct page *,
+		unsigned long, size_t, enum dma_data_direction);
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+		enum dma_data_direction);
+
+/*
+ * Private functions
+ */
+int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long,
+		size_t, enum dma_data_direction);
+int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long,
+		size_t, enum dma_data_direction);
+#else
+#define dmabounce_sync_for_cpu(dev,dma,off,sz,dir)	(1)
+#define dmabounce_sync_for_device(dev,dma,off,sz,dir)	(1)
 
 
 /**
@@ -198,19 +274,16 @@ int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
  * can regain ownership by calling dma_unmap_single() or
  * dma_sync_single_for_cpu().
  */
-#ifndef CONFIG_DMABOUNCE
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
-	       enum dma_data_direction dir)
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+		size_t size, enum dma_data_direction dir)
 {
+	BUG_ON(!valid_dma_direction(dir));
+
 	if (!arch_is_coherent())
 		dma_cache_maint(cpu_addr, size, dir);
 
 	return virt_to_dma(dev, cpu_addr);
 }
-#else
-extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
-#endif
 
 /**
  * dma_map_page - map a portion of a page for streaming DMA
@@ -224,23 +297,25 @@ extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_d
  * or written back.
  *
  * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_page() or
- * dma_sync_single_for_cpu().
+ * can regain ownership by calling dma_unmap_page().
  */
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction dir)
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size, enum dma_data_direction dir)
 {
-	return dma_map_single(dev, page_address(page) + offset, size, dir);
+	BUG_ON(!valid_dma_direction(dir));
+
+	if (!arch_is_coherent())
+		dma_cache_maint(page_address(page) + offset, size, dir);
+
+	return page_to_dma(dev, page) + offset;
 }
 
 /**
  * dma_unmap_single - unmap a single buffer previously mapped
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
+ * @size: size of buffer (same as passed to dma_map_single)
+ * @dir: DMA transfer direction (same as passed to dma_map_single)
  *
  * Unmap a single streaming mode DMA translation.  The handle and size
  * must match what was provided in the previous dma_map_single() call.
@@ -249,108 +324,34 @@ dma_map_page(struct device *dev, struct page *page,
  * After this call, reads by the CPU to the buffer are guaranteed to see
  * whatever the device wrote there.
  */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
-		 enum dma_data_direction dir)
+static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir)
 {
 	/* nothing to do */
 }
-#else
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
-#endif
+#endif /* CONFIG_DMABOUNCE */
 
 /**
  * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
+ * @size: size of buffer (same as passed to dma_map_page)
+ * @dir: DMA transfer direction (same as passed to dma_map_page)
  *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
+ * Unmap a page streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_page() call.
  * All other usages are undefined.
  *
  * After this call, reads by the CPU to the buffer are guaranteed to see
  * whatever the device wrote there.
  */
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
-	       enum dma_data_direction dir)
+static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir)
 {
 	dma_unmap_single(dev, handle, size, dir);
 }
 
 /**
- * dma_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scatter-gather version of the
- * above dma_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	   enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++, sg++) {
-		char *virt;
-
-		sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset;
-		virt = sg_virt(sg);
-
-		if (!arch_is_coherent())
-			dma_cache_maint(virt, sg->length, dir);
-	}
-
-	return nents;
-}
-#else
-extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
-#endif
-
-/**
- * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Unmap a set of streaming mode DMA translations.
- * Again, CPU read rules concerning calls here are the same as for
- * dma_unmap_single() above.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-	     enum dma_data_direction dir)
-{
-
-	/* nothing to do */
-}
-#else
-extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
-#endif
-
-
-/**
  * dma_sync_single_range_for_cpu
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @handle: DMA address of buffer
@@ -368,145 +369,52 @@ extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_da
  * must first the perform a dma_sync_for_device, and then the
  * device again owns the buffer.
  */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
-			      unsigned long offset, size_t size,
-			      enum dma_data_direction dir)
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+		dma_addr_t handle, unsigned long offset, size_t size,
+		enum dma_data_direction dir)
 {
-	if (!arch_is_coherent())
-		dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+	BUG_ON(!valid_dma_direction(dir));
+
+	dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
 }
 
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction dir)
+static inline void dma_sync_single_range_for_device(struct device *dev,
+		dma_addr_t handle, unsigned long offset, size_t size,
+		enum dma_data_direction dir)
 {
+	BUG_ON(!valid_dma_direction(dir));
+
+	if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
+		return;
+
 	if (!arch_is_coherent())
 		dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
 }
-#else
-extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
-extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
-#endif
 
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
-			enum dma_data_direction dir)
+static inline void dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
 {
 	dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
 }
 
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
-			   enum dma_data_direction dir)
+static inline void dma_sync_single_for_device(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
 {
 	dma_sync_single_range_for_device(dev, handle, 0, size, dir);
 }
 
-
-/**
- * dma_sync_sg_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as dma_sync_single_for_* but for a scatter-gather list,
- * same rules and usage.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
-		    enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++, sg++) {
-		char *virt = sg_virt(sg);
-		if (!arch_is_coherent())
-			dma_cache_maint(virt, sg->length, dir);
-	}
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
-		       enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++, sg++) {
-		char *virt = sg_virt(sg);
-		if (!arch_is_coherent())
-			dma_cache_maint(virt, sg->length, dir);
-	}
-}
-#else
-extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
-extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
-#endif
-
-#ifdef CONFIG_DMABOUNCE
 /*
- * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
- * and utilize bounce buffers as needed to work around limited DMA windows.
- *
- * On the SA-1111, a bug limits DMA to only certain regions of RAM.
- * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
- * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
- *
- * The following are helper functions used by the dmabounce subystem
- *
- */
-
-/**
- * dmabounce_register_dev
- *
- * @dev: valid struct device pointer
- * @small_buf_size: size of buffers to use with small buffer pool
- * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
- *
- * This function should be called by low-level platform code to register
- * a device as requireing DMA buffer bouncing. The function will allocate
- * appropriate DMA pools for the device.
- *
- */
-extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
-
-/**
- * dmabounce_unregister_dev
- *
- * @dev: valid struct device pointer
- *
- * This function should be called by low-level platform code when device
- * that was previously registered with dmabounce_register_dev is removed
- * from the system.
- *
+ * The scatter list versions of the above methods.
  */
-extern void dmabounce_unregister_dev(struct device *);
+extern int dma_map_sg(struct device *, struct scatterlist *, int,
+		enum dma_data_direction);
+extern void dma_unmap_sg(struct device *, struct scatterlist *, int,
+		enum dma_data_direction);
+extern void dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
+		enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
+		enum dma_data_direction);
 
-/**
- * dma_needs_bounce
- *
- * @dev: valid struct device pointer
- * @dma_handle: dma_handle of unbounced buffer
- * @size: size of region being mapped
- *
- * Platforms that utilize the dmabounce mechanism must implement
- * this function.
- *
- * The dmabounce routines call this function whenever a dma-mapping
- * is requested to determine whether a given buffer needs to be bounced
- * or not. The function must return 0 if the buffer is OK for
- * DMA access and 1 if the buffer needs to be bounced.
- *
- */
-extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
-#endif /* CONFIG_DMABOUNCE */
 
 #endif /* __KERNEL__ */
 #endif
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 4ca7516..a58378c 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -3,7 +3,6 @@
 
 #include <asm/hwcap.h>
 
-#ifndef __ASSEMBLY__
 /*
  * ELF register definitions..
  */
@@ -17,12 +16,34 @@ typedef unsigned long elf_freg_t[3];
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
 typedef struct user_fp elf_fpregset_t;
-#endif
 
 #define EM_ARM	40
-#define EF_ARM_APCS26 0x08
-#define EF_ARM_SOFT_FLOAT 0x200
-#define EF_ARM_EABI_MASK 0xFF000000
+
+#define EF_ARM_EABI_MASK	0xff000000
+#define EF_ARM_EABI_UNKNOWN	0x00000000
+#define EF_ARM_EABI_VER1	0x01000000
+#define EF_ARM_EABI_VER2	0x02000000
+#define EF_ARM_EABI_VER3	0x03000000
+#define EF_ARM_EABI_VER4	0x04000000
+#define EF_ARM_EABI_VER5	0x05000000
+
+#define EF_ARM_BE8		0x00800000	/* ABI 4,5 */
+#define EF_ARM_LE8		0x00400000	/* ABI 4,5 */
+#define EF_ARM_MAVERICK_FLOAT	0x00000800	/* ABI 0 */
+#define EF_ARM_VFP_FLOAT	0x00000400	/* ABI 0 */
+#define EF_ARM_SOFT_FLOAT	0x00000200	/* ABI 0 */
+#define EF_ARM_OLD_ABI		0x00000100	/* ABI 0 */
+#define EF_ARM_NEW_ABI		0x00000080	/* ABI 0 */
+#define EF_ARM_ALIGN8		0x00000040	/* ABI 0 */
+#define EF_ARM_PIC		0x00000020	/* ABI 0 */
+#define EF_ARM_MAPSYMSFIRST	0x00000010	/* ABI 2 */
+#define EF_ARM_APCS_FLOAT	0x00000010	/* ABI 0, floats in fp regs */
+#define EF_ARM_DYNSYMSUSESEGIDX	0x00000008	/* ABI 2 */
+#define EF_ARM_APCS_26		0x00000008	/* ABI 0 */
+#define EF_ARM_SYMSARESORTED	0x00000004	/* ABI 1,2 */
+#define EF_ARM_INTERWORK	0x00000004	/* ABI 0 */
+#define EF_ARM_HASENTRY		0x00000002	/* All */
+#define EF_ARM_RELEXEC		0x00000001	/* All */
 
 #define R_ARM_NONE	0
 #define R_ARM_PC24	1
@@ -41,7 +62,6 @@ typedef struct user_fp elf_fpregset_t;
 #endif
 #define ELF_ARCH	EM_ARM
 
-#ifndef __ASSEMBLY__
 /*
  * This yields a string that ld.so will use to load implementation
  * specific libraries for optimization.  This is more specific in
@@ -59,25 +79,17 @@ typedef struct user_fp elf_fpregset_t;
 #define ELF_PLATFORM	(elf_platform)
 
 extern char elf_platform[];
-#endif
 
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x))
+struct elf32_hdr;
 
 /*
- * 32-bit code is always OK.  Some cpus can do 26-bit, some can't.
+ * This is used to ensure we don't load something for the wrong architecture.
  */
-#define ELF_PROC_OK(x)	(ELF_THUMB_OK(x) && ELF_26BIT_OK(x))
-
-#define ELF_THUMB_OK(x) \
-	((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \
-	 ((x)->e_entry & 3) == 0)
+extern int elf_check_arch(const struct elf32_hdr *);
+#define elf_check_arch elf_check_arch
 
-#define ELF_26BIT_OK(x) \
-	((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \
-	  ((x)->e_flags & EF_ARM_APCS26) == 0)
+extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
+#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
 
 #define USE_ELF_CORE_DUMP
 #define ELF_EXEC_PAGESIZE	4096
@@ -94,23 +106,7 @@ extern char elf_platform[];
    have no such handler.  */
 #define ELF_PLAT_INIT(_r, load_addr)	(_r)->ARM_r0 = 0
 
-/*
- * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
- * and CP1, we only enable access to the iWMMXt coprocessor if the
- * binary is EABI or softfloat (and thus, guaranteed not to use
- * FPA instructions.)
- */
-#define SET_PERSONALITY(ex, ibcs2)					\
-	do {								\
-		if ((ex).e_flags & EF_ARM_APCS26) {			\
-			set_personality(PER_LINUX);			\
-		} else {						\
-			set_personality(PER_LINUX_32BIT);		\
-			if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \
-				set_thread_flag(TIF_USING_IWMMXT);	\
-			else						\
-				clear_thread_flag(TIF_USING_IWMMXT);	\
-		}							\
-	} while (0)
+extern void elf_set_personality(const struct elf32_hdr *);
+#define SET_PERSONALITY(ex)	elf_set_personality(&(ex))
 
 #endif
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 6a332a9..9ee743b 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -1,6 +1,124 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_ARM_FUTEX_H
+#define _ASM_ARM_FUTEX_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SMP
 
 #include <asm-generic/futex.h>
 
-#endif
+#else /* !SMP, we can work around lack of atomic ops by disabling preemption */
+
+#include <linux/futex.h>
+#include <linux/preempt.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+	__asm__ __volatile__(					\
+	"1:	ldrt	%1, [%2]\n"				\
+	"	" insn "\n"					\
+	"2:	strt	%0, [%2]\n"				\
+	"	mov	%0, #0\n"				\
+	"3:\n"							\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 4f, 2b, 4f\n"			\
+	"	.previous\n"					\
+	"	.section .fixup,\"ax\"\n"			\
+	"4:	mov	%0, %4\n"				\
+	"	b	3b\n"					\
+	"	.previous"					\
+	: "=&r" (ret), "=&r" (oldval)				\
+	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
+	: "cc", "memory")
+
+static inline int
+futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();	/* implies preempt_disable() */
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("mov	%0, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("add	%0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("orr	%0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("and	%0, %1, %3", ret, oldval, uaddr, ~oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("eor	%0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();	/* subsumes preempt_enable() */
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int val;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();	/* implies preempt_disable() */
+
+	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
+	"1:	ldrt	%0, [%3]\n"
+	"	teq	%0, %1\n"
+	"2:	streqt	%2, [%3]\n"
+	"3:\n"
+	"	.section __ex_table,\"a\"\n"
+	"	.align	3\n"
+	"	.long	1b, 4f, 2b, 4f\n"
+	"	.previous\n"
+	"	.section .fixup,\"ax\"\n"
+	"4:	mov	%0, %4\n"
+	"	b	3b\n"
+	"	.previous"
+	: "=&r" (val)
+	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
+	: "cc", "memory");
+
+	pagefault_enable();	/* subsumes preempt_enable() */
+
+	return val;
+}
+
+#endif /* !SMP */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ARM_FUTEX_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 71934856..a809445 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -60,10 +60,9 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 #define MT_DEVICE		0
 #define MT_DEVICE_NONSHARED	1
 #define MT_DEVICE_CACHED	2
-#define MT_DEVICE_IXP2000	3
-#define MT_DEVICE_WC		4
+#define MT_DEVICE_WC		3
 /*
- * types 5 onwards can be found in asm/mach/map.h and are undefined
+ * types 4 onwards can be found in asm/mach/map.h and are undefined
  * for ioremap
  */
 
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index d678609..a0009aa 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -22,6 +22,10 @@
 #ifndef __ASSEMBLY__
 struct irqaction;
 extern void migrate_irqs(void);
+
+extern void asm_do_IRQ(unsigned int, struct pt_regs *);
+void init_IRQ(void);
+
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
index a5d0d99..bb8a19b 100644
--- a/arch/arm/include/asm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -61,7 +61,6 @@ struct kprobe_ctlblk {
 void arch_remove_kprobe(struct kprobe *);
 void kretprobe_trampoline(void);
 
-int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
 int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
 int kprobe_exceptions_notify(struct notifier_block *self,
 			     unsigned long val, void *data);
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 9eb936e..cb1139a 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -18,16 +18,13 @@ struct map_desc {
 	unsigned int type;
 };
 
-/* types 0-4 are defined in asm/io.h */
-#define MT_CACHECLEAN		5
-#define MT_MINICLEAN		6
-#define MT_LOW_VECTORS		7
-#define MT_HIGH_VECTORS		8
-#define MT_MEMORY		9
-#define MT_ROM			10
-
-#define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
-#define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000
+/* types 0-3 are defined in asm/io.h */
+#define MT_CACHECLEAN		4
+#define MT_MINICLEAN		5
+#define MT_LOW_VECTORS		6
+#define MT_HIGH_VECTORS		7
+#define MT_MEMORY		8
+#define MT_ROM			9
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 270902c..f3eabf1 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -18,8 +18,7 @@ struct pxa2xx_udc_mach_info {
 	/* Boards following the design guidelines in the developer's manual,
 	 * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
 	 * VBUS IRQ and omit the methods above.  Store the GPIO number
-	 * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
-	 * Note that sometimes the signals go through inverters...
+	 * here.  Note that sometimes the signals go through inverters...
 	 */
 	bool	gpio_vbus_inverted;
 	u16	gpio_vbus;			/* high == vbus present */
diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h
index e1ca48a..6b884d2 100644
--- a/arch/arm/include/asm/mc146818rtc.h
+++ b/arch/arm/include/asm/mc146818rtc.h
@@ -4,8 +4,8 @@
 #ifndef _ASM_MC146818RTC_H
 #define _ASM_MC146818RTC_H
 
+#include <linux/io.h>
 #include <mach/irqs.h>
-#include <asm/io.h>
 
 #ifndef RTC_PORT
 #define RTC_PORT(x)	(0x70 + (x))
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index bf7c737..809ff9a 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -13,30 +13,27 @@
 #ifndef __ASM_ARM_MEMORY_H
 #define __ASM_ARM_MEMORY_H
 
+#include <linux/compiler.h>
+#include <linux/const.h>
+#include <mach/memory.h>
+#include <asm/sizes.h>
+
 /*
  * Allow for constants defined here to be used from assembly code
  * by prepending the UL suffix only with actual C code compilation.
  */
-#ifndef __ASSEMBLY__
-#define UL(x) (x##UL)
-#else
-#define UL(x) (x)
-#endif
-
-#include <linux/compiler.h>
-#include <mach/memory.h>
-#include <asm/sizes.h>
+#define UL(x) _AC(x, UL)
 
 #ifdef CONFIG_MMU
 
-#ifndef TASK_SIZE
 /*
+ * PAGE_OFFSET - the virtual address of the start of the kernel image
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
  */
-#define TASK_SIZE		UL(0xbf000000)
-#define TASK_UNMAPPED_BASE	UL(0x40000000)
-#endif
+#define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
+#define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
+#define TASK_UNMAPPED_BASE	(UL(CONFIG_PAGE_OFFSET) / 3)
 
 /*
  * The maximum size of a 26-bit user space task.
@@ -44,13 +41,6 @@
 #define TASK_SIZE_26		UL(0x04000000)
 
 /*
- * Page offset: 3GB
- */
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET		UL(0xc0000000)
-#endif
-
-/*
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
@@ -147,17 +137,11 @@
 
 #ifndef arch_adjust_zones
 #define arch_adjust_zones(node,size,holes) do { } while (0)
+#elif !defined(CONFIG_ZONE_DMA)
+#error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
 #endif
 
 /*
- * Amount of memory reserved for the vmalloc() area, and minimum
- * address for vmalloc mappings.
- */
-extern unsigned long vmalloc_reserve;
-
-#define VMALLOC_MIN		(void *)(VMALLOC_END - vmalloc_reserve)
-
-/*
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.
  *
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index a301e44..0559f37 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -15,6 +15,7 @@
 
 #include <linux/compiler.h>
 #include <asm/cacheflush.h>
+#include <asm/cachetype.h>
 #include <asm/proc-fns.h>
 #include <asm-generic/mm_hooks.h>
 
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index cf2e268..bed1c0a 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -184,8 +184,9 @@ typedef struct page *pgtable_t;
 
 #endif /* !__ASSEMBLY__ */
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS \
+	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
+	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 /*
  * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 8e21ef1..110295c 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -164,14 +164,30 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define L_PTE_PRESENT		(1 << 0)
 #define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
 #define L_PTE_YOUNG		(1 << 1)
-#define L_PTE_BUFFERABLE	(1 << 2)	/* matches PTE */
-#define L_PTE_CACHEABLE		(1 << 3)	/* matches PTE */
-#define L_PTE_USER		(1 << 4)
-#define L_PTE_WRITE		(1 << 5)
-#define L_PTE_EXEC		(1 << 6)
-#define L_PTE_DIRTY		(1 << 7)
+#define L_PTE_BUFFERABLE	(1 << 2)	/* obsolete, matches PTE */
+#define L_PTE_CACHEABLE		(1 << 3)	/* obsolete, matches PTE */
+#define L_PTE_DIRTY		(1 << 6)
+#define L_PTE_WRITE		(1 << 7)
+#define L_PTE_USER		(1 << 8)
+#define L_PTE_EXEC		(1 << 9)
 #define L_PTE_SHARED		(1 << 10)	/* shared(v6), coherent(xsc3) */
 
+/*
+ * These are the memory types, defined to be compatible with
+ * pre-ARMv6 CPUs cacheable and bufferable bits:   XXCB
+ */
+#define L_PTE_MT_UNCACHED	(0x00 << 2)	/* 0000 */
+#define L_PTE_MT_BUFFERABLE	(0x01 << 2)	/* 0001 */
+#define L_PTE_MT_WRITETHROUGH	(0x02 << 2)	/* 0010 */
+#define L_PTE_MT_WRITEBACK	(0x03 << 2)	/* 0011 */
+#define L_PTE_MT_MINICACHE	(0x06 << 2)	/* 0110 (sa1100, xscale) */
+#define L_PTE_MT_WRITEALLOC	(0x07 << 2)	/* 0111 */
+#define L_PTE_MT_DEV_SHARED	(0x04 << 2)	/* 0100 */
+#define L_PTE_MT_DEV_NONSHARED	(0x0c << 2)	/* 1100 */
+#define L_PTE_MT_DEV_WC		(0x09 << 2)	/* 1001 */
+#define L_PTE_MT_DEV_CACHED	(0x0b << 2)	/* 1011 */
+#define L_PTE_MT_MASK		(0x0f << 2)
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -180,23 +196,30 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
  * as well as any architecture dependent bits like global/ASID and SMP
  * shared mapping bits.
  */
-#define _L_PTE_DEFAULT	L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
-#define _L_PTE_READ	L_PTE_USER | L_PTE_EXEC
+#define _L_PTE_DEFAULT	L_PTE_PRESENT | L_PTE_YOUNG
 
 extern pgprot_t		pgprot_user;
 extern pgprot_t		pgprot_kernel;
 
-#define PAGE_NONE	pgprot_user
-#define PAGE_COPY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
-#define PAGE_SHARED	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
-				 L_PTE_WRITE)
-#define PAGE_READONLY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
-#define PAGE_KERNEL	pgprot_kernel
-
-#define __PAGE_NONE	__pgprot(_L_PTE_DEFAULT)
-#define __PAGE_COPY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
-#define __PAGE_SHARED	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
-#define __PAGE_READONLY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define _MOD_PROT(p, b)	__pgprot(pgprot_val(p) | (b))
+
+#define PAGE_NONE		pgprot_user
+#define PAGE_SHARED		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_WRITE)
+#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_WRITE | L_PTE_EXEC)
+#define PAGE_COPY		_MOD_PROT(pgprot_user, L_PTE_USER)
+#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_EXEC)
+#define PAGE_READONLY		_MOD_PROT(pgprot_user, L_PTE_USER)
+#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_EXEC)
+#define PAGE_KERNEL		pgprot_kernel
+#define PAGE_KERNEL_EXEC	_MOD_PROT(pgprot_kernel, L_PTE_EXEC)
+
+#define __PAGE_NONE		__pgprot(_L_PTE_DEFAULT)
+#define __PAGE_SHARED		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_WRITE)
+#define __PAGE_SHARED_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_WRITE | L_PTE_EXEC)
+#define __PAGE_COPY		__pgprot(_L_PTE_DEFAULT | L_PTE_USER)
+#define __PAGE_COPY_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_EXEC)
+#define __PAGE_READONLY		__pgprot(_L_PTE_DEFAULT | L_PTE_USER)
+#define __PAGE_READONLY_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_EXEC)
 
 #endif /* __ASSEMBLY__ */
 
@@ -212,19 +235,19 @@ extern pgprot_t		pgprot_kernel;
 #define __P001  __PAGE_READONLY
 #define __P010  __PAGE_COPY
 #define __P011  __PAGE_COPY
-#define __P100  __PAGE_READONLY
-#define __P101  __PAGE_READONLY
-#define __P110  __PAGE_COPY
-#define __P111  __PAGE_COPY
+#define __P100  __PAGE_READONLY_EXEC
+#define __P101  __PAGE_READONLY_EXEC
+#define __P110  __PAGE_COPY_EXEC
+#define __P111  __PAGE_COPY_EXEC
 
 #define __S000  __PAGE_NONE
 #define __S001  __PAGE_READONLY
 #define __S010  __PAGE_SHARED
 #define __S011  __PAGE_SHARED
-#define __S100  __PAGE_READONLY
-#define __S101  __PAGE_READONLY
-#define __S110  __PAGE_SHARED
-#define __S111  __PAGE_SHARED
+#define __S100  __PAGE_READONLY_EXEC
+#define __S101  __PAGE_READONLY_EXEC
+#define __S110  __PAGE_SHARED_EXEC
+#define __S111  __PAGE_SHARED_EXEC
 
 #ifndef __ASSEMBLY__
 /*
@@ -286,8 +309,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 /*
  * Mark the prot value as uncacheable and unbufferable.
  */
-#define pgprot_noncached(prot)	__pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE))
-#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE)
+#define pgprot_noncached(prot) \
+	__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED)
+#define pgprot_writecombine(prot) \
+	__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE)
 
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define pmd_present(pmd)	(pmd_val(pmd))
@@ -320,11 +345,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 #define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
 
 /*
- * Permanent address of a page. We never have highmem, so this is trivial.
- */
-#define pages_to_mb(x)		((x) >> (20 - PAGE_SHIFT))
-
-/*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
  */
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index b415c0e..7319261 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -54,7 +54,6 @@
 #define PSR_C_BIT	0x20000000
 #define PSR_Z_BIT	0x40000000
 #define PSR_N_BIT	0x80000000
-#define PCMASK		0
 
 /*
  * Groups of PSR bits
@@ -139,11 +138,7 @@ static inline int valid_user_regs(struct pt_regs *regs)
 	return 0;
 }
 
-#define pc_pointer(v) \
-	((v) & ~PCMASK)
-
-#define instruction_pointer(regs) \
-	(pc_pointer((regs)->ARM_pc))
+#define instruction_pointer(regs)	(regs)->ARM_pc
 
 #ifdef CONFIG_SMP
 extern unsigned long profile_pc(struct pt_regs *regs);
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 7bbf105..a65413b 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -209,6 +209,17 @@ struct meminfo {
 	struct membank bank[NR_BANKS];
 };
 
+#define for_each_nodebank(iter,mi,no)			\
+	for (iter = 0; iter < mi->nr_banks; iter++)	\
+		if (mi->bank[iter].node == no)
+
+#define bank_pfn_start(bank)	__phys_to_pfn((bank)->start)
+#define bank_pfn_end(bank)	__phys_to_pfn((bank)->start + (bank)->size)
+#define bank_pfn_size(bank)	((bank)->size >> PAGE_SHIFT)
+#define bank_phys_start(bank)	(bank)->start
+#define bank_phys_end(bank)	((bank)->start + (bank)->size)
+#define bank_phys_size(bank)	(bank)->size
+
 /*
  * Early command line parameters.
  */
diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h
index 2771581..0009861 100644
--- a/arch/arm/include/asm/sparsemem.h
+++ b/arch/arm/include/asm/sparsemem.h
@@ -3,8 +3,22 @@
 
 #include <asm/memory.h>
 
-#define MAX_PHYSADDR_BITS	32
-#define MAX_PHYSMEM_BITS	32
-#define SECTION_SIZE_BITS	NODE_MEM_SIZE_BITS
+/*
+ * Two definitions are required for sparsemem:
+ *
+ * MAX_PHYSMEM_BITS: The number of physical address bits required
+ *   to address the last byte of memory.
+ *
+ * SECTION_SIZE_BITS: The number of physical address bits to cover
+ *   the maximum amount of memory in a section.
+ *
+ * Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000,
+ * then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26.
+ *
+ * Define these in your mach/memory.h.
+ */
+#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS)
+#error Sparsemem is not supported on this platform
+#endif
 
 #endif
diff --git a/arch/arm/include/asm/statfs.h b/arch/arm/include/asm/statfs.h
index a02e6a8..079447c 100644
--- a/arch/arm/include/asm/statfs.h
+++ b/arch/arm/include/asm/statfs.h
@@ -1,42 +1,12 @@
 #ifndef _ASMARM_STATFS_H
 #define _ASMARM_STATFS_H
 
-#ifndef __KERNEL_STRICT_NAMES
-# include <linux/types.h>
-typedef __kernel_fsid_t	fsid_t;
-#endif
-
-struct statfs {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u32 f_blocks;
-	__u32 f_bfree;
-	__u32 f_bavail;
-	__u32 f_files;
-	__u32 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-};
-
 /*
  * With EABI there is 4 bytes of padding added to this structure.
  * Let's pack it so the padding goes away to simplify dual ABI support.
  * Note that user space does NOT have to pack this structure.
  */
-struct statfs64 {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u64 f_blocks;
-	__u64 f_bfree;
-	__u64 f_bavail;
-	__u64 f_files;
-	__u64 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-} __attribute__ ((packed,aligned(4)));
+#define ARCH_PACK_STATFS64 __attribute__((packed,aligned(4)))
 
+#include <asm-generic/statfs.h>
 #endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 514af79..7aad784 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -43,11 +43,6 @@
 #define CR_XP	(1 << 23)	/* Extended page tables			*/
 #define CR_VE	(1 << 24)	/* Vectored interrupts			*/
 
-#define CPUID_ID	0
-#define CPUID_CACHETYPE	1
-#define CPUID_TCM	2
-#define CPUID_TLBTYPE	3
-
 /*
  * This is used to ensure the compiler did actually allocate the register we
  * asked it for some inline assembly sequences.  Apparently we can't trust
@@ -61,36 +56,8 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/linkage.h>
-#include <linux/stringify.h>
 #include <linux/irqflags.h>
 
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg)							\
-	({								\
-		unsigned int __val;					\
-		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
-		    : "=r" (__val)					\
-		    :							\
-		    : "cc");						\
-		__val;							\
-	})
-#else
-extern unsigned int processor_id;
-#define read_cpuid(reg) (processor_id)
-#endif
-
-/*
- * The CPU ID never changes at run time, so we might as well tell the
- * compiler that it's constant.  Use this function to read the CPU ID
- * rather than directly reading processor_id or read_cpuid() directly.
- */
-static inline unsigned int read_cpuid_id(void) __attribute_const__;
-
-static inline unsigned int read_cpuid_id(void)
-{
-	return read_cpuid(CPUID_ID);
-}
-
 #define __exception	__attribute__((section(".exception.text")))
 
 struct thread_info;
@@ -131,31 +98,6 @@ extern void cpu_init(void);
 void arm_machine_restart(char mode);
 extern void (*arm_pm_restart)(char str);
 
-/*
- * Intel's XScale3 core supports some v6 features (supersections, L2)
- * but advertises itself as v5 as it does not support the v6 ISA.  For
- * this reason, we need a way to explicitly test for this type of CPU.
- */
-#ifndef CONFIG_CPU_XSC3
-#define cpu_is_xsc3()	0
-#else
-static inline int cpu_is_xsc3(void)
-{
-	extern unsigned int processor_id;
-
-	if ((processor_id & 0xffffe000) == 0x69056000)
-		return 1;
-
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
-#define	cpu_is_xscale()	0
-#else
-#define	cpu_is_xscale()	1
-#endif
-
 #define UDBG_UNDEFINED	(1 << 0)
 #define UDBG_SYSCALL	(1 << 1)
 #define UDBG_BADABORT	(1 << 2)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index e56fa48..68b9ec8 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -98,7 +98,7 @@ static inline struct thread_info *current_thread_info(void)
 }
 
 #define thread_saved_pc(tsk)	\
-	((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
+	((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
 #define thread_saved_fp(tsk)	\
 	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
 
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index d0f51ff..e98ec60 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -225,7 +225,7 @@ do {									\
 
 #define __get_user_asm_byte(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	ldrbt	%1,[%2],#0\n"				\
+	"1:	ldrbt	%1,[%2]\n"				\
 	"2:\n"							\
 	"	.section .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -261,7 +261,7 @@ do {									\
 
 #define __get_user_asm_word(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	ldrt	%1,[%2],#0\n"				\
+	"1:	ldrt	%1,[%2]\n"				\
 	"2:\n"							\
 	"	.section .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -306,7 +306,7 @@ do {									\
 
 #define __put_user_asm_byte(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strbt	%1,[%2],#0\n"				\
+	"1:	strbt	%1,[%2]\n"				\
 	"2:\n"							\
 	"	.section .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -339,7 +339,7 @@ do {									\
 
 #define __put_user_asm_word(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strt	%1,[%2],#0\n"				\
+	"1:	strt	%1,[%2]\n"				\
 	"2:\n"							\
 	"	.section .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -365,7 +365,7 @@ do {									\
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
 	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
-	"2:	strt	" __reg_oper0 ", [%1], #0\n"		\
+	"2:	strt	" __reg_oper0 ", [%1]\n"		\
 	"3:\n"							\
 	"	.section .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h
index 6a3cd2a2..250a4dd 100644
--- a/arch/arm/include/asm/vga.h
+++ b/arch/arm/include/asm/vga.h
@@ -1,8 +1,8 @@
 #ifndef ASMARM_VGA_H
 #define ASMARM_VGA_H
 
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 #define VGA_MAP_MEM(x,s)	(PCIMEM_BASE + (x))
 
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 1d296fc..4305345 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -10,7 +10,7 @@ endif
 
 # Object file lists.
 
-obj-y		:= compat.o entry-armv.o entry-common.o irq.o \
+obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
 		   process.o ptrace.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index cc7b246..2357b1c 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -13,11 +13,11 @@
 #include <linux/delay.h>
 #include <linux/in6.h>
 #include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #include <asm/checksum.h>
-#include <asm/io.h>
 #include <asm/system.h>
-#include <asm/uaccess.h>
 #include <asm/ftrace.h>
 
 /*
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index e574754..17a59b6 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -10,8 +10,8 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 3b6a1c2..99995c2 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -15,9 +15,9 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <mach/ep93xx-regs.h>
 #include <asm/thread_notify.h>
-#include <asm/io.h>
 
 struct crunch_state *crunch_owner;
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 9550ff0..f53c582 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -89,10 +89,12 @@
 ENTRY(printhex8)
 		mov	r1, #8
 		b	printhex
+ENDPROC(printhex8)
 
 ENTRY(printhex4)
 		mov	r1, #4
 		b	printhex
+ENDPROC(printhex4)
 
 ENTRY(printhex2)
 		mov	r1, #2
@@ -110,6 +112,7 @@ printhex:	adr	r2, hexbuf
 		bne	1b
 		mov	r0, r2
 		b	printascii
+ENDPROC(printhex2)
 
 		.ltorg
 
@@ -127,11 +130,13 @@ ENTRY(printascii)
 		teqne	r1, #0
 		bne	1b
 		mov	pc, lr
+ENDPROC(printascii)
 
 ENTRY(printch)
 		addruart r3
 		mov	r1, r0
 		mov	r0, #0
 		b	1b
+ENDPROC(printch)
 
 hexbuf:		.space 16
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 2f080a3..4a3a504 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -19,10 +19,9 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
+#include <linux/io.h>
 
 #include <asm/dma.h>
-#include <asm/io.h>
-
 #include <asm/mach/dma.h>
 
 #define ISA_DMA_MODE_READ	0x44
diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index ba99a20..d006085 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -26,23 +26,6 @@ EXPORT_SYMBOL(dma_spin_lock);
 static dma_t dma_chan[MAX_DMA_CHANNELS];
 
 /*
- * Get dma list for /proc/dma
- */
-int get_dma_list(char *buf)
-{
-	dma_t *dma;
-	char *p = buf;
-	int i;
-
-	for (i = 0, dma = dma_chan; i < MAX_DMA_CHANNELS; i++, dma++)
-		if (dma->lock)
-			p += sprintf(p, "%2d: %14s %s\n", i,
-				     dma->d_ops->type, dma->device_id);
-
-	return p - buf;
-}
-
-/*
  * Request DMA channel
  *
  * On certain platforms, we have to allocate an interrupt as well...
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 7a50575..60c079d 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -587,8 +587,7 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
 			pending = ecard_default_ops.irqpending(ec);
 
 		if (pending) {
-			struct irq_desc *d = irq_desc + ec->irq;
-			desc_handle_irq(ec->irq, d);
+			generic_handle_irq(ec->irq);
 			called ++;
 		}
 	}
@@ -622,7 +621,6 @@ ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
 		ecard_t *ec = slot_to_ecard(slot);
 
 		if (ec->claimed) {
-			struct irq_desc *d = irq_desc + ec->irq;
 			/*
 			 * this ugly code is so that we can operate a
 			 * prioritorising system:
@@ -635,7 +633,7 @@ ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
 			 * Serial cards should go in 0/1, ethernet/scsi in 2/3
 			 * otherwise you will lose serial data at high speeds!
 			 */
-			desc_handle_irq(ec->irq, d);
+			generic_handle_irq(ec->irq);
 		} else {
 			printk(KERN_WARNING "card%d: interrupt from unclaimed "
 			       "card???\n", slot);
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
new file mode 100644
index 0000000..513f332
--- /dev/null
+++ b/arch/arm/kernel/elf.c
@@ -0,0 +1,79 @@
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/personality.h>
+#include <linux/binfmts.h>
+#include <linux/elf.h>
+
+int elf_check_arch(const struct elf32_hdr *x)
+{
+	unsigned int eflags;
+
+	/* Make sure it's an ARM executable */
+	if (x->e_machine != EM_ARM)
+		return 0;
+
+	/* Make sure the entry address is reasonable */
+	if (x->e_entry & 1) {
+		if (!(elf_hwcap & HWCAP_THUMB))
+			return 0;
+	} else if (x->e_entry & 3)
+		return 0;
+
+	eflags = x->e_flags;
+	if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
+		/* APCS26 is only allowed if the CPU supports it */
+		if ((eflags & EF_ARM_APCS_26) && !(elf_hwcap & HWCAP_26BIT))
+			return 0;
+
+		/* VFP requires the supporting code */
+		if ((eflags & EF_ARM_VFP_FLOAT) && !(elf_hwcap & HWCAP_VFP))
+			return 0;
+	}
+	return 1;
+}
+EXPORT_SYMBOL(elf_check_arch);
+
+void elf_set_personality(const struct elf32_hdr *x)
+{
+	unsigned int eflags = x->e_flags;
+	unsigned int personality = PER_LINUX_32BIT;
+
+	/*
+	 * APCS-26 is only valid for OABI executables
+	 */
+	if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
+		if (eflags & EF_ARM_APCS_26)
+			personality = PER_LINUX;
+	}
+
+	set_personality(personality);
+
+	/*
+	 * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
+	 * and CP1, we only enable access to the iWMMXt coprocessor if the
+	 * binary is EABI or softfloat (and thus, guaranteed not to use
+	 * FPA instructions.)
+	 */
+	if (elf_hwcap & HWCAP_IWMMXT &&
+	    eflags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) {
+		set_thread_flag(TIF_USING_IWMMXT);
+	} else {
+		clear_thread_flag(TIF_USING_IWMMXT);
+	}
+}
+EXPORT_SYMBOL(elf_set_personality);
+
+/*
+ * Set READ_IMPLIES_EXEC if:
+ *  - the binary requires an executable stack
+ *  - we're running on a CPU which doesn't support NX.
+ */
+int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
+{
+	if (executable_stack != EXSTACK_ENABLE_X)
+		return 1;
+	if (cpu_architecture() <= CPU_ARCH_ARMv6)
+		return 1;
+	return 0;
+}
+EXPORT_SYMBOL(arm_elf_read_implies_exec);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 617e509..77b0474 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -76,14 +76,17 @@
 __pabt_invalid:
 	inv_entry BAD_PREFETCH
 	b	common_invalid
+ENDPROC(__pabt_invalid)
 
 __dabt_invalid:
 	inv_entry BAD_DATA
 	b	common_invalid
+ENDPROC(__dabt_invalid)
 
 __irq_invalid:
 	inv_entry BAD_IRQ
 	b	common_invalid
+ENDPROC(__irq_invalid)
 
 __und_invalid:
 	inv_entry BAD_UNDEFINSTR
@@ -107,6 +110,7 @@ common_invalid:
 
 	mov	r0, sp
 	b	bad_mode
+ENDPROC(__und_invalid)
 
 /*
  * SVC mode handlers
@@ -192,6 +196,7 @@ __dabt_svc:
 	ldr	r0, [sp, #S_PSR]
 	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+ENDPROC(__dabt_svc)
 
 	.align	5
 __irq_svc:
@@ -223,6 +228,7 @@ __irq_svc:
 	bleq	trace_hardirqs_on
 #endif
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+ENDPROC(__irq_svc)
 
 	.ltorg
 
@@ -272,6 +278,7 @@ __und_svc:
 	ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
 	msr	spsr_cxsf, lr
 	ldmia	sp, {r0 - pc}^			@ Restore SVC registers
+ENDPROC(__und_svc)
 
 	.align	5
 __pabt_svc:
@@ -313,6 +320,7 @@ __pabt_svc:
 	ldr	r0, [sp, #S_PSR]
 	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+ENDPROC(__pabt_svc)
 
 	.align	5
 .LCcralign:
@@ -412,6 +420,7 @@ __dabt_usr:
 	mov	r2, sp
 	adr	lr, ret_from_exception
 	b	do_DataAbort
+ENDPROC(__dabt_usr)
 
 	.align	5
 __irq_usr:
@@ -441,6 +450,7 @@ __irq_usr:
 
 	mov	why, #0
 	b	ret_to_user
+ENDPROC(__irq_usr)
 
 	.ltorg
 
@@ -474,6 +484,7 @@ __und_usr:
 #else
 	b	__und_usr_unknown
 #endif
+ENDPROC(__und_usr)
 
 	@
 	@ fallthrough to call_fpe
@@ -642,6 +653,7 @@ __und_usr_unknown:
 	mov	r0, sp
 	adr	lr, ret_from_exception
 	b	do_undefinstr
+ENDPROC(__und_usr_unknown)
 
 	.align	5
 __pabt_usr:
@@ -666,6 +678,8 @@ ENTRY(ret_from_exception)
 	get_thread_info tsk
 	mov	why, #0
 	b	ret_to_user
+ENDPROC(__pabt_usr)
+ENDPROC(ret_from_exception)
 
 /*
  * Register switch for ARMv3 and ARMv4 processors
@@ -702,6 +716,7 @@ ENTRY(__switch_to)
 	bl	atomic_notifier_call_chain
 	mov	r0, r5
 	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+ENDPROC(__switch_to)
 
 	__INIT
 
@@ -1029,6 +1044,7 @@ vector_\name:
 	mov	r0, sp
 	ldr	lr, [pc, lr, lsl #2]
 	movs	pc, lr			@ branch to handler in SVC mode
+ENDPROC(vector_\name)
 	.endm
 
 	.globl	__stubs_start
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 060d7e2..3aa14dc 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -77,6 +77,7 @@ no_work_pending:
 	mov	r0, r0
 	add	sp, sp, #S_FRAME_SIZE - S_PC
 	movs	pc, lr				@ return & move spsr_svc into cpsr
+ENDPROC(ret_to_user)
 
 /*
  * This is how we return from a fork.
@@ -92,7 +93,7 @@ ENTRY(ret_from_fork)
 	mov	r0, #1				@ trace exit [IP = 1]
 	bl	syscall_trace
 	b	ret_slow_syscall
-	
+ENDPROC(ret_from_fork)
 
 	.equ NR_syscalls,0
 #define CALL(x) .equ NR_syscalls,NR_syscalls+1
@@ -269,6 +270,7 @@ ENTRY(vector_swi)
 	eor	r0, scno, #__NR_SYSCALL_BASE	@ put OS number back
 	bcs	arm_syscall	
 	b	sys_ni_syscall			@ not private func
+ENDPROC(vector_swi)
 
 	/*
 	 * This is the really slow path.  We're going to be doing
@@ -326,7 +328,6 @@ ENTRY(sys_call_table)
  */
 @ r0 = syscall number
 @ r8 = syscall table
-		.type	sys_syscall, #function
 sys_syscall:
 		bic	scno, r0, #__NR_OABI_SYSCALL_BASE
 		cmp	scno, #__NR_syscall - __NR_SYSCALL_BASE
@@ -338,53 +339,65 @@ sys_syscall:
 		movlo	r3, r4
 		ldrlo	pc, [tbl, scno, lsl #2]
 		b	sys_ni_syscall
+ENDPROC(sys_syscall)
 
 sys_fork_wrapper:
 		add	r0, sp, #S_OFF
 		b	sys_fork
+ENDPROC(sys_fork_wrapper)
 
 sys_vfork_wrapper:
 		add	r0, sp, #S_OFF
 		b	sys_vfork
+ENDPROC(sys_vfork_wrapper)
 
 sys_execve_wrapper:
 		add	r3, sp, #S_OFF
 		b	sys_execve
+ENDPROC(sys_execve_wrapper)
 
 sys_clone_wrapper:
 		add	ip, sp, #S_OFF
 		str	ip, [sp, #4]
 		b	sys_clone
+ENDPROC(sys_clone_wrapper)
 
 sys_sigsuspend_wrapper:
 		add	r3, sp, #S_OFF
 		b	sys_sigsuspend
+ENDPROC(sys_sigsuspend_wrapper)
 
 sys_rt_sigsuspend_wrapper:
 		add	r2, sp, #S_OFF
 		b	sys_rt_sigsuspend
+ENDPROC(sys_rt_sigsuspend_wrapper)
 
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
 		b	sys_sigreturn
+ENDPROC(sys_sigreturn_wrapper)
 
 sys_rt_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
 		b	sys_rt_sigreturn
+ENDPROC(sys_rt_sigreturn_wrapper)
 
 sys_sigaltstack_wrapper:
 		ldr	r2, [sp, #S_OFF + S_SP]
 		b	do_sigaltstack
+ENDPROC(sys_sigaltstack_wrapper)
 
 sys_statfs64_wrapper:
 		teq	r1, #88
 		moveq	r1, #84
 		b	sys_statfs64
+ENDPROC(sys_statfs64_wrapper)
 
 sys_fstatfs64_wrapper:
 		teq	r1, #88
 		moveq	r1, #84
 		b	sys_fstatfs64
+ENDPROC(sys_fstatfs64_wrapper)
 
 /*
  * Note: off_4k (r5) is always units of 4K.  If we can't do the requested
@@ -402,11 +415,14 @@ sys_mmap2:
 		str	r5, [sp, #4]
 		b	do_mmap2
 #endif
+ENDPROC(sys_mmap2)
 
 ENTRY(pabort_ifar)
 		mrc	p15, 0, r0, cr6, cr0, 2
 ENTRY(pabort_noifar)
 		mov	pc, lr
+ENDPROC(pabort_ifar)
+ENDPROC(pabort_noifar)
 
 #ifdef CONFIG_OABI_COMPAT
 
@@ -417,26 +433,31 @@ ENTRY(pabort_noifar)
 sys_oabi_pread64:
 		stmia	sp, {r3, r4}
 		b	sys_pread64
+ENDPROC(sys_oabi_pread64)
 
 sys_oabi_pwrite64:
 		stmia	sp, {r3, r4}
 		b	sys_pwrite64
+ENDPROC(sys_oabi_pwrite64)
 
 sys_oabi_truncate64:
 		mov	r3, r2
 		mov	r2, r1
 		b	sys_truncate64
+ENDPROC(sys_oabi_truncate64)
 
 sys_oabi_ftruncate64:
 		mov	r3, r2
 		mov	r2, r1
 		b	sys_ftruncate64
+ENDPROC(sys_oabi_ftruncate64)
 
 sys_oabi_readahead:
 		str	r3, [sp]
 		mov	r3, r2
 		mov	r2, r1
 		b	sys_readahead
+ENDPROC(sys_oabi_readahead)
 
 /*
  * Let's declare a second syscall table for old ABI binaries
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index e8e9034..36f81d9 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -45,7 +45,6 @@
 #include <asm/fiq.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/uaccess.h>
 
 static unsigned long no_fiq_insn;
 
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 1c3c6ea..bde52df 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -36,7 +36,6 @@ __switch_data:
  *  r2  = atags pointer
  *  r9  = processor ID
  */
-	.type	__mmap_switched, %function
 __mmap_switched:
 	adr	r3, __switch_data + 4
 
@@ -59,6 +58,7 @@ __mmap_switched:
 	bic	r4, r0, #CR_A			@ Clear 'A' bit
 	stmia	r7, {r0, r4}			@ Save control register values
 	b	start_kernel
+ENDPROC(__mmap_switched)
 
 /*
  * Exception handling.  Something went wrong and we can't proceed.  We
@@ -69,8 +69,6 @@ __mmap_switched:
  * and hope for the best (useful if bootloader fails to pass a proper
  * machine ID for example).
  */
-
-	.type	__error_p, %function
 __error_p:
 #ifdef CONFIG_DEBUG_LL
 	adr	r0, str_p1
@@ -84,8 +82,8 @@ str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant (0x"
 str_p2:	.asciz	").\n"
 	.align
 #endif
+ENDPROC(__error_p)
 
-	.type	__error_a, %function
 __error_a:
 #ifdef CONFIG_DEBUG_LL
 	mov	r4, r1				@ preserve machine ID
@@ -115,13 +113,14 @@ __error_a:
 	adr	r0, str_a3
 	bl	printascii
 	b	__error
+ENDPROC(__error_a)
+
 str_a1:	.asciz	"\nError: unrecognized/unsupported machine ID (r1 = 0x"
 str_a2:	.asciz	").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
 str_a3:	.asciz	"\nPlease check your kernel config and/or bootloader.\n"
 	.align
 #endif
 
-	.type	__error, %function
 __error:
 #ifdef CONFIG_ARCH_RPC
 /*
@@ -138,6 +137,7 @@ __error:
 #endif
 1:	mov	r0, r0
 	b	1b
+ENDPROC(__error)
 
 
 /*
@@ -153,7 +153,6 @@ __error:
  *	r5 = proc_info pointer in physical address space
  *	r9 = cpuid (preserved)
  */
-	.type	__lookup_processor_type, %function
 __lookup_processor_type:
 	adr	r3, 3f
 	ldmda	r3, {r5 - r7}
@@ -169,6 +168,7 @@ __lookup_processor_type:
 	blo	1b
 	mov	r5, #0				@ unknown processor
 2:	mov	pc, lr
+ENDPROC(__lookup_processor_type)
 
 /*
  * This provides a C-API version of the above function.
@@ -179,6 +179,7 @@ ENTRY(lookup_processor_type)
 	bl	__lookup_processor_type
 	mov	r0, r5
 	ldmfd	sp!, {r4 - r7, r9, pc}
+ENDPROC(lookup_processor_type)
 
 /*
  * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
@@ -201,7 +202,6 @@ ENTRY(lookup_processor_type)
  *  r3, r4, r6 corrupted
  *  r5 = mach_info pointer in physical address space
  */
-	.type	__lookup_machine_type, %function
 __lookup_machine_type:
 	adr	r3, 3b
 	ldmia	r3, {r4, r5, r6}
@@ -216,6 +216,7 @@ __lookup_machine_type:
 	blo	1b
 	mov	r5, #0				@ unknown machine
 2:	mov	pc, lr
+ENDPROC(__lookup_machine_type)
 
 /*
  * This provides a C-API version of the above function.
@@ -226,6 +227,7 @@ ENTRY(lookup_machine_type)
 	bl	__lookup_machine_type
 	mov	r0, r5
 	ldmfd	sp!, {r4 - r6, pc}
+ENDPROC(lookup_machine_type)
 
 /* Determine validity of the r2 atags pointer.  The heuristic requires
  * that the pointer be aligned, in the first 16k of physical RAM and
@@ -239,8 +241,6 @@ ENTRY(lookup_machine_type)
  *  r2 either valid atags pointer, or zero
  *  r5, r6 corrupted
  */
-
-	.type	__vet_atags, %function
 __vet_atags:
 	tst	r2, #0x3			@ aligned?
 	bne	1f
@@ -257,3 +257,4 @@ __vet_atags:
 
 1:	mov	r2, #0
 	mov	pc, lr
+ENDPROC(__vet_atags)
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 27329bd..cc87e17 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -33,7 +33,6 @@
  *
  */
 	.section ".text.head", "ax"
-	.type	stext, %function
 ENTRY(stext)
 	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
 						@ and irqs disabled
@@ -53,11 +52,11 @@ ENTRY(stext)
 						@ the initialization is done
 	adr	lr, __after_proc_init		@ return (PIC) address
 	add	pc, r10, #PROCINFO_INITFUNC
+ENDPROC(stext)
 
 /*
  * Set the Control Register and Read the process ID.
  */
-	.type	__after_proc_init, %function
 __after_proc_init:
 #ifdef CONFIG_CPU_CP15
 	mrc	p15, 0, r0, c1, c0, 0		@ read control reg
@@ -85,6 +84,7 @@ __after_proc_init:
 
 	mov	pc, r13				@ clear the BSS and jump
 						@ to start_kernel
+ENDPROC(__after_proc_init)
 	.ltorg
 
 #include "head-common.S"
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index bff4c6e..21e17dc 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -75,7 +75,6 @@
  * circumstances, zImage) is for.
  */
 	.section ".text.head", "ax"
-	.type	stext, %function
 ENTRY(stext)
 	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
 						@ and irqs disabled
@@ -100,9 +99,9 @@ ENTRY(stext)
 						@ mmu has been enabled
 	adr	lr, __enable_mmu		@ return (PIC) address
 	add	pc, r10, #PROCINFO_INITFUNC
+ENDPROC(stext)
 
 #if defined(CONFIG_SMP)
-	.type   secondary_startup, #function
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.
@@ -128,6 +127,7 @@ ENTRY(secondary_startup)
 	adr	lr, __enable_mmu		@ return address
 	add	pc, r10, #PROCINFO_INITFUNC	@ initialise processor
 						@ (return control reg)
+ENDPROC(secondary_startup)
 
 	/*
 	 * r6  = &secondary_data
@@ -136,6 +136,7 @@ ENTRY(__secondary_switched)
 	ldr	sp, [r7, #4]			@ get secondary_data.stack
 	mov	fp, #0
 	b	secondary_start_kernel
+ENDPROC(__secondary_switched)
 
 	.type	__secondary_data, %object
 __secondary_data:
@@ -151,7 +152,6 @@ __secondary_data:
  * this is just loading the page table pointer and domain access
  * registers.
  */
-	.type	__enable_mmu, %function
 __enable_mmu:
 #ifdef CONFIG_ALIGNMENT_TRAP
 	orr	r0, r0, #CR_A
@@ -174,6 +174,7 @@ __enable_mmu:
 	mcr	p15, 0, r5, c3, c0, 0		@ load domain access register
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
 	b	__turn_mmu_on
+ENDPROC(__enable_mmu)
 
 /*
  * Enable the MMU.  This completely changes the structure of the visible
@@ -187,7 +188,6 @@ __enable_mmu:
  * other registers depend on the function called upon completion
  */
 	.align	5
-	.type	__turn_mmu_on, %function
 __turn_mmu_on:
 	mov	r0, r0
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
@@ -195,7 +195,7 @@ __turn_mmu_on:
 	mov	r3, r3
 	mov	r3, r3
 	mov	pc, r13
-
+ENDPROC(__turn_mmu_on)
 
 
 /*
@@ -211,7 +211,6 @@ __turn_mmu_on:
  *  r0, r3, r6, r7 corrupted
  *  r4 = physical page table address
  */
-	.type	__create_page_tables, %function
 __create_page_tables:
 	pgtbl	r4				@ page table address
 
@@ -325,6 +324,7 @@ __create_page_tables:
 #endif
 #endif
 	mov	pc, lr
+ENDPROC(__create_page_tables)
 	.ltorg
 
 #include "head-common.S"
diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
index 8b8c9d3..0bbf806 100644
--- a/arch/arm/kernel/init_task.c
+++ b/arch/arm/kernel/init_task.c
@@ -8,8 +8,8 @@
 #include <linux/init.h>
 #include <linux/init_task.h>
 #include <linux/mqueue.h>
+#include <linux/uaccess.h>
 
-#include <asm/uaccess.h>
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
diff --git a/arch/arm/kernel/io.c b/arch/arm/kernel/io.c
index 1f6822d..f447030 100644
--- a/arch/arm/kernel/io.c
+++ b/arch/arm/kernel/io.c
@@ -1,7 +1,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 /*
  * Copy data from IO memory space to "real" memory space.
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index f88efb1..2f3eb79 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -112,18 +112,17 @@ static struct irq_desc bad_irq_desc = {
 asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-	struct irq_desc *desc = irq_desc + irq;
+
+	irq_enter();
 
 	/*
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
 	if (irq >= NR_IRQS)
-		desc = &bad_irq_desc;
-
-	irq_enter();
-
-	desc_handle_irq(irq, desc);
+		handle_bad_irq(irq, &bad_irq_desc);
+	else
+		generic_handle_irq(irq);
 
 	/* AT91 specific workaround */
 	irq_finish(irq);
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index aaffaec..ba8ccfe 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -111,8 +111,6 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
 	case 'D':
 	case 'k':
 	case 'c':
-		kgdb_contthread = NULL;
-
 		/*
 		 * Try to read optional parameter, pc unchanged if no parm.
 		 * If this was a compiled breakpoint, we need to move
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index b4565bb..da1f949 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -488,7 +488,7 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
 
 	if (!ubit)
 		addr -= reg_count;
-	addr += (!pbit ^ !ubit);
+	addr += (!pbit == !ubit);
 
 	reg_bit_vector = insn & 0xffff;
 	while (reg_bit_vector) {
@@ -503,7 +503,7 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
 	if (wbit) {
 		if (!ubit)
 			addr -= reg_count;
-		addr -= (!pbit ^ !ubit);
+		addr -= (!pbit == !ubit);
 		regs->uregs[rn] = (long)addr;
 	}
 }
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index d28513f1..3f9abe0 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -200,9 +200,12 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
 	}
 }
 
-int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
+static int __kprobes kprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
 {
+	unsigned long flags;
+	local_irq_save(flags);
 	kprobe_handler(regs);
+	local_irq_restore(flags);
 	return 0;
 }
 
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index fae5beb..440dc62 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -6,10 +6,10 @@
 #include <linux/kexec.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
+#include <linux/io.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
-#include <asm/io.h>
 #include <asm/cacheflush.h>
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index a68259a..9203ba7 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -47,7 +47,7 @@ void *module_alloc(unsigned long size)
 	if (!area)
 		return NULL;
 
-	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
+	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC);
 }
 #else /* CONFIG_MMU */
 void *module_alloc(unsigned long size)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 3fd8823..d3ea6fa 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -28,12 +28,12 @@
 #include <linux/pm.h>
 #include <linux/tick.h>
 #include <linux/utsname.h>
+#include <linux/uaccess.h>
 
 #include <asm/leds.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/thread_notify.h>
-#include <asm/uaccess.h>
 #include <asm/mach/time.h>
 
 static const char *processor_modes[] = {
@@ -267,35 +267,6 @@ void show_regs(struct pt_regs * regs)
 	__backtrace();
 }
 
-void show_fpregs(struct user_fp *regs)
-{
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		unsigned long *p;
-		char type;
-
-		p = (unsigned long *)(regs->fpregs + i);
-
-		switch (regs->ftype[i]) {
-			case 1: type = 'f'; break;
-			case 2: type = 'd'; break;
-			case 3: type = 'e'; break;
-			default: type = '?'; break;
-		}
-		if (regs->init_flag)
-			type = '?';
-
-		printk("  f%d(%c): %08lx %08lx %08lx%c",
-			i, type, p[0], p[1], p[2], i & 1 ? '\n' : ' ');
-	}
-			
-
-	printk("FPSR: %08lx FPCR: %08lx\n",
-		(unsigned long)regs->fpsr,
-		(unsigned long)regs->fpcr);
-}
-
 /*
  * Free current thread data structures etc..
  */
@@ -414,7 +385,7 @@ unsigned long get_wchan(struct task_struct *p)
 	do {
 		if (fp < stack_start || fp > stack_end)
 			return 0;
-		lr = pc_pointer (((unsigned long *)fp)[-1]);
+		lr = ((unsigned long *)fp)[-1];
 		if (!in_sched_functions(lr))
 			return lr;
 		fp = *(unsigned long *) (fp - 12);
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 4b05dc5..df653ea 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -18,8 +18,8 @@
 #include <linux/security.h>
 #include <linux/init.h>
 #include <linux/signal.h>
+#include <linux/uaccess.h>
 
-#include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
 #include <asm/traps.h>
@@ -126,7 +126,7 @@ ptrace_getrn(struct task_struct *child, unsigned long insn)
 
 	val = get_user_reg(child, reg);
 	if (reg == 15)
-		val = pc_pointer(val + 8);
+		val += 8;
 
 	return val;
 }
@@ -278,8 +278,7 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in
 				else
 					base -= aluop2;
 			}
-			if (read_u32(child, base, &alt) == 0)
-				alt = pc_pointer(alt);
+			read_u32(child, base, &alt);
 		}
 		break;
 
@@ -305,8 +304,7 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in
 
 			base = ptrace_getrn(child, insn);
 
-			if (read_u32(child, base + nr_regs, &alt) == 0)
-				alt = pc_pointer(alt);
+			read_u32(child, base + nr_regs, &alt);
 			break;
 		}
 		break;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 2ca7038..1f1eecc 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -26,11 +26,13 @@
 #include <linux/fs.h>
 
 #include <asm/cpu.h>
+#include <asm/cputype.h>
 #include <asm/elf.h>
 #include <asm/procinfo.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/cacheflush.h>
+#include <asm/cachetype.h>
 #include <asm/tlbflush.h>
 
 #include <asm/mach/arch.h>
@@ -59,13 +61,14 @@ __setup("fpe=", fpe_setup);
 
 extern void paging_init(struct meminfo *, struct machine_desc *desc);
 extern void reboot_setup(char *str);
-extern int root_mountflags;
-extern void _stext, _text, _etext, __data_start, _edata, _end;
+extern void _text, _etext, __data_start, _edata, _end;
 
 unsigned int processor_id;
 EXPORT_SYMBOL(processor_id);
 unsigned int __machine_arch_type;
 EXPORT_SYMBOL(__machine_arch_type);
+unsigned int cacheid;
+EXPORT_SYMBOL(cacheid);
 
 unsigned int __atags_pointer __initdata;
 
@@ -81,8 +84,6 @@ EXPORT_SYMBOL(system_serial_high);
 unsigned int elf_hwcap;
 EXPORT_SYMBOL(elf_hwcap);
 
-unsigned long __initdata vmalloc_reserve = 128 << 20;
-
 
 #ifdef MULTI_CPU
 struct processor processor;
@@ -111,9 +112,6 @@ static struct stack stacks[NR_CPUS];
 char elf_platform[ELF_PLATFORM_SIZE];
 EXPORT_SYMBOL(elf_platform);
 
-unsigned long phys_initrd_start __initdata = 0;
-unsigned long phys_initrd_size __initdata = 0;
-
 static struct meminfo meminfo __initdata = { 0, };
 static const char *cpu_name;
 static const char *machine_name;
@@ -178,63 +176,6 @@ static struct resource io_res[] = {
 #define lp1 io_res[1]
 #define lp2 io_res[2]
 
-static const char *cache_types[16] = {
-	"write-through",
-	"write-back",
-	"write-back",
-	"undefined 3",
-	"undefined 4",
-	"undefined 5",
-	"write-back",
-	"write-back",
-	"undefined 8",
-	"undefined 9",
-	"undefined 10",
-	"undefined 11",
-	"undefined 12",
-	"undefined 13",
-	"write-back",
-	"undefined 15",
-};
-
-static const char *cache_clean[16] = {
-	"not required",
-	"read-block",
-	"cp15 c7 ops",
-	"undefined 3",
-	"undefined 4",
-	"undefined 5",
-	"cp15 c7 ops",
-	"cp15 c7 ops",
-	"undefined 8",
-	"undefined 9",
-	"undefined 10",
-	"undefined 11",
-	"undefined 12",
-	"undefined 13",
-	"cp15 c7 ops",
-	"undefined 15",
-};
-
-static const char *cache_lockdown[16] = {
-	"not supported",
-	"not supported",
-	"not supported",
-	"undefined 3",
-	"undefined 4",
-	"undefined 5",
-	"format A",
-	"format B",
-	"undefined 8",
-	"undefined 9",
-	"undefined 10",
-	"undefined 11",
-	"undefined 12",
-	"undefined 13",
-	"format C",
-	"undefined 15",
-};
-
 static const char *proc_arch[] = {
 	"undefined/unknown",
 	"3",
@@ -255,61 +196,19 @@ static const char *proc_arch[] = {
 	"?(17)",
 };
 
-#define CACHE_TYPE(x)	(((x) >> 25) & 15)
-#define CACHE_S(x)	((x) & (1 << 24))
-#define CACHE_DSIZE(x)	(((x) >> 12) & 4095)	/* only if S=1 */
-#define CACHE_ISIZE(x)	((x) & 4095)
-
-#define CACHE_SIZE(y)	(((y) >> 6) & 7)
-#define CACHE_ASSOC(y)	(((y) >> 3) & 7)
-#define CACHE_M(y)	((y) & (1 << 2))
-#define CACHE_LINE(y)	((y) & 3)
-
-static inline void dump_cache(const char *prefix, int cpu, unsigned int cache)
-{
-	unsigned int mult = 2 + (CACHE_M(cache) ? 1 : 0);
-
-	printk("CPU%u: %s: %d bytes, associativity %d, %d byte lines, %d sets\n",
-		cpu, prefix,
-		mult << (8 + CACHE_SIZE(cache)),
-		(mult << CACHE_ASSOC(cache)) >> 1,
-		8 << CACHE_LINE(cache),
-		1 << (6 + CACHE_SIZE(cache) - CACHE_ASSOC(cache) -
-			CACHE_LINE(cache)));
-}
-
-static void __init dump_cpu_info(int cpu)
-{
-	unsigned int info = read_cpuid(CPUID_CACHETYPE);
-
-	if (info != processor_id) {
-		printk("CPU%u: D %s %s cache\n", cpu, cache_is_vivt() ? "VIVT" : "VIPT",
-		       cache_types[CACHE_TYPE(info)]);
-		if (CACHE_S(info)) {
-			dump_cache("I cache", cpu, CACHE_ISIZE(info));
-			dump_cache("D cache", cpu, CACHE_DSIZE(info));
-		} else {
-			dump_cache("cache", cpu, CACHE_ISIZE(info));
-		}
-	}
-
-	if (arch_is_coherent())
-		printk("Cache coherency enabled\n");
-}
-
 int cpu_architecture(void)
 {
 	int cpu_arch;
 
-	if ((processor_id & 0x0008f000) == 0) {
+	if ((read_cpuid_id() & 0x0008f000) == 0) {
 		cpu_arch = CPU_ARCH_UNKNOWN;
-	} else if ((processor_id & 0x0008f000) == 0x00007000) {
-		cpu_arch = (processor_id & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3;
-	} else if ((processor_id & 0x00080000) == 0x00000000) {
-		cpu_arch = (processor_id >> 16) & 7;
+	} else if ((read_cpuid_id() & 0x0008f000) == 0x00007000) {
+		cpu_arch = (read_cpuid_id() & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3;
+	} else if ((read_cpuid_id() & 0x00080000) == 0x00000000) {
+		cpu_arch = (read_cpuid_id() >> 16) & 7;
 		if (cpu_arch)
 			cpu_arch += CPU_ARCH_ARMv3;
-	} else if ((processor_id & 0x000f0000) == 0x000f0000) {
+	} else if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
 		unsigned int mmfr0;
 
 		/* Revised CPUID format. Read the Memory Model Feature
@@ -330,6 +229,34 @@ int cpu_architecture(void)
 	return cpu_arch;
 }
 
+static void __init cacheid_init(void)
+{
+	unsigned int cachetype = read_cpuid_cachetype();
+	unsigned int arch = cpu_architecture();
+
+	if (arch >= CPU_ARCH_ARMv7) {
+		cacheid = CACHEID_VIPT_NONALIASING;
+		if ((cachetype & (3 << 14)) == 1 << 14)
+			cacheid |= CACHEID_ASID_TAGGED;
+	} else if (arch >= CPU_ARCH_ARMv6) {
+		if (cachetype & (1 << 23))
+			cacheid = CACHEID_VIPT_ALIASING;
+		else
+			cacheid = CACHEID_VIPT_NONALIASING;
+	} else {
+		cacheid = CACHEID_VIVT;
+	}
+
+	printk("CPU: %s data cache, %s instruction cache\n",
+		cache_is_vivt() ? "VIVT" :
+		cache_is_vipt_aliasing() ? "VIPT aliasing" :
+		cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown",
+		cache_is_vivt() ? "VIVT" :
+		icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" :
+		cache_is_vipt_aliasing() ? "VIPT aliasing" :
+		cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown");
+}
+
 /*
  * These functions re-use the assembly code in head.S, which
  * already provide the required functionality.
@@ -346,10 +273,10 @@ static void __init setup_processor(void)
 	 * types.  The linker builds this table for us from the
 	 * entries in arch/arm/mm/proc-*.S
 	 */
-	list = lookup_processor_type(processor_id);
+	list = lookup_processor_type(read_cpuid_id());
 	if (!list) {
 		printk("CPU configuration botched (ID %08x), unable "
-		       "to continue.\n", processor_id);
+		       "to continue.\n", read_cpuid_id());
 		while (1);
 	}
 
@@ -369,7 +296,7 @@ static void __init setup_processor(void)
 #endif
 
 	printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
-	       cpu_name, processor_id, (int)processor_id & 15,
+	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
 	       proc_arch[cpu_architecture()], cr_alignment);
 
 	sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
@@ -379,14 +306,14 @@ static void __init setup_processor(void)
 	elf_hwcap &= ~HWCAP_THUMB;
 #endif
 
+	cacheid_init();
 	cpu_proc_init();
 }
 
 /*
  * cpu_init - initialise one CPU.
  *
- * cpu_init dumps the cache information, initialises SMP specific
- * information, and sets up the per-CPU stacks.
+ * cpu_init sets up the per-CPU stacks.
  */
 void cpu_init(void)
 {
@@ -398,9 +325,6 @@ void cpu_init(void)
 		BUG();
 	}
 
-	if (system_state == SYSTEM_BOOTING)
-		dump_cpu_info(cpu);
-
 	/*
 	 * setup stacks for re-entrant exception handlers
 	 */
@@ -443,20 +367,6 @@ static struct machine_desc * __init setup_machine(unsigned int nr)
 	return list;
 }
 
-static void __init early_initrd(char **p)
-{
-	unsigned long start, size;
-
-	start = memparse(*p, p);
-	if (**p == ',') {
-		size = memparse((*p) + 1, p);
-
-		phys_initrd_start = start;
-		phys_initrd_size = size;
-	}
-}
-__early_param("initrd=", early_initrd);
-
 static void __init arm_add_memory(unsigned long start, unsigned long size)
 {
 	struct membank *bank;
@@ -503,17 +413,6 @@ static void __init early_mem(char **p)
 __early_param("mem=", early_mem);
 
 /*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the vmalloc
- * area - the default is 128m.
- */
-static void __init early_vmalloc(char **arg)
-{
-	vmalloc_reserve = memparse(*arg, arg);
-}
-__early_param("vmalloc=", early_vmalloc);
-
-/*
  * Initial parsing of the command line.
  */
 static void __init parse_cmdline(char **cmdline_p, char *from)
@@ -527,12 +426,12 @@ static void __init parse_cmdline(char **cmdline_p, char *from)
 			struct early_params *p;
 
 			for (p = &__early_begin; p < &__early_end; p++) {
-				int len = strlen(p->arg);
+				int arglen = strlen(p->arg);
 
-				if (memcmp(from, p->arg, len) == 0) {
+				if (memcmp(from, p->arg, arglen) == 0) {
 					if (to != command_line)
 						to -= 1;
-					from += len;
+					from += arglen;
 					p->fn(&from);
 
 					while (*from != ' ' && *from != '\0')
@@ -579,18 +478,13 @@ request_standard_resources(struct meminfo *mi, struct machine_desc *mdesc)
 	kernel_data.end     = virt_to_phys(&_end - 1);
 
 	for (i = 0; i < mi->nr_banks; i++) {
-		unsigned long virt_start, virt_end;
-
 		if (mi->bank[i].size == 0)
 			continue;
 
-		virt_start = __phys_to_virt(mi->bank[i].start);
-		virt_end   = virt_start + mi->bank[i].size - 1;
-
 		res = alloc_bootmem_low(sizeof(*res));
 		res->name  = "System RAM";
-		res->start = __virt_to_phys(virt_start);
-		res->end   = __virt_to_phys(virt_end);
+		res->start = mi->bank[i].start;
+		res->end   = mi->bank[i].start + mi->bank[i].size - 1;
 		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 
 		request_resource(&iomem_resource, res);
@@ -694,26 +588,6 @@ static int __init parse_tag_ramdisk(const struct tag *tag)
 
 __tagtable(ATAG_RAMDISK, parse_tag_ramdisk);
 
-static int __init parse_tag_initrd(const struct tag *tag)
-{
-	printk(KERN_WARNING "ATAG_INITRD is deprecated; "
-		"please update your bootloader.\n");
-	phys_initrd_start = __virt_to_phys(tag->u.initrd.start);
-	phys_initrd_size = tag->u.initrd.size;
-	return 0;
-}
-
-__tagtable(ATAG_INITRD, parse_tag_initrd);
-
-static int __init parse_tag_initrd2(const struct tag *tag)
-{
-	phys_initrd_start = tag->u.initrd.start;
-	phys_initrd_size = tag->u.initrd.size;
-	return 0;
-}
-
-__tagtable(ATAG_INITRD2, parse_tag_initrd2);
-
 static int __init parse_tag_serialnr(const struct tag *tag)
 {
 	system_serial_low = tag->u.serialnr.low;
@@ -901,28 +775,12 @@ static const char *hwcap_str[] = {
 	NULL
 };
 
-static void
-c_show_cache(struct seq_file *m, const char *type, unsigned int cache)
-{
-	unsigned int mult = 2 + (CACHE_M(cache) ? 1 : 0);
-
-	seq_printf(m, "%s size\t\t: %d\n"
-		      "%s assoc\t\t: %d\n"
-		      "%s line length\t: %d\n"
-		      "%s sets\t\t: %d\n",
-		type, mult << (8 + CACHE_SIZE(cache)),
-		type, (mult << CACHE_ASSOC(cache)) >> 1,
-		type, 8 << CACHE_LINE(cache),
-		type, 1 << (6 + CACHE_SIZE(cache) - CACHE_ASSOC(cache) -
-			    CACHE_LINE(cache)));
-}
-
 static int c_show(struct seq_file *m, void *v)
 {
 	int i;
 
 	seq_printf(m, "Processor\t: %s rev %d (%s)\n",
-		   cpu_name, (int)processor_id & 15, elf_platform);
+		   cpu_name, read_cpuid_id() & 15, elf_platform);
 
 #if defined(CONFIG_SMP)
 	for_each_online_cpu(i) {
@@ -949,47 +807,26 @@ static int c_show(struct seq_file *m, void *v)
 		if (elf_hwcap & (1 << i))
 			seq_printf(m, "%s ", hwcap_str[i]);
 
-	seq_printf(m, "\nCPU implementer\t: 0x%02x\n", processor_id >> 24);
+	seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24);
 	seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]);
 
-	if ((processor_id & 0x0008f000) == 0x00000000) {
+	if ((read_cpuid_id() & 0x0008f000) == 0x00000000) {
 		/* pre-ARM7 */
-		seq_printf(m, "CPU part\t: %07x\n", processor_id >> 4);
+		seq_printf(m, "CPU part\t: %07x\n", read_cpuid_id() >> 4);
 	} else {
-		if ((processor_id & 0x0008f000) == 0x00007000) {
+		if ((read_cpuid_id() & 0x0008f000) == 0x00007000) {
 			/* ARM7 */
 			seq_printf(m, "CPU variant\t: 0x%02x\n",
-				   (processor_id >> 16) & 127);
+				   (read_cpuid_id() >> 16) & 127);
 		} else {
 			/* post-ARM7 */
 			seq_printf(m, "CPU variant\t: 0x%x\n",
-				   (processor_id >> 20) & 15);
+				   (read_cpuid_id() >> 20) & 15);
 		}
 		seq_printf(m, "CPU part\t: 0x%03x\n",
-			   (processor_id >> 4) & 0xfff);
-	}
-	seq_printf(m, "CPU revision\t: %d\n", processor_id & 15);
-
-	{
-		unsigned int cache_info = read_cpuid(CPUID_CACHETYPE);
-		if (cache_info != processor_id) {
-			seq_printf(m, "Cache type\t: %s\n"
-				      "Cache clean\t: %s\n"
-				      "Cache lockdown\t: %s\n"
-				      "Cache format\t: %s\n",
-				   cache_types[CACHE_TYPE(cache_info)],
-				   cache_clean[CACHE_TYPE(cache_info)],
-				   cache_lockdown[CACHE_TYPE(cache_info)],
-				   CACHE_S(cache_info) ? "Harvard" : "Unified");
-
-			if (CACHE_S(cache_info)) {
-				c_show_cache(m, "I", CACHE_ISIZE(cache_info));
-				c_show_cache(m, "D", CACHE_DSIZE(cache_info));
-			} else {
-				c_show_cache(m, "Cache", CACHE_ISIZE(cache_info));
-			}
-		}
+			   (read_cpuid_id() >> 4) & 0xfff);
 	}
+	seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15);
 
 	seq_puts(m, "\n");
 
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index ef2f86a..80b8b5c 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -11,11 +11,11 @@
 #include <linux/signal.h>
 #include <linux/personality.h>
 #include <linux/freezer.h>
+#include <linux/uaccess.h>
 
 #include <asm/elf.h>
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
-#include <asm/uaccess.h>
 #include <asm/unistd.h>
 
 #include "ptrace.h"
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index e9842f6..e42a749 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -277,6 +277,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	/*
 	 * Enable local interrupts.
 	 */
+	notify_cpu_starting(cpu);
 	local_irq_enable();
 	local_fiq_enable();
 
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 0128687..b3ec641 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -27,8 +27,7 @@
 #include <linux/file.h>
 #include <linux/utsname.h>
 #include <linux/ipc.h>
-
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 extern unsigned long do_mremap(unsigned long addr, unsigned long old_len,
 			       unsigned long new_len, unsigned long flags,
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 96ab5f5..42623db 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -82,7 +82,7 @@
 #include <linux/socket.h>
 #include <linux/net.h>
 #include <linux/ipc.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 struct oldabi_stat64 {
 	unsigned long long st_dev;
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 368d171..c68b44a 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -59,7 +59,7 @@ unsigned long profile_pc(struct pt_regs *regs)
 
 	if (in_lock_functions(pc)) {
 		fp = regs->ARM_fp;
-		pc = pc_pointer(((unsigned long *)fp)[-1]);
+		pc = ((unsigned long *)fp)[-1];
 	}
 
 	return pc;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 872f1f8..57e6874 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -19,15 +19,13 @@
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/kprobes.h>
+#include <linux/uaccess.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/system.h>
-#include <asm/uaccess.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
-#include <asm/io.h>
 
 #include "ptrace.h"
 #include "signal.h"
@@ -69,7 +67,8 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
  */
 static int verify_stack(unsigned long sp)
 {
-	if (sp < PAGE_OFFSET || (sp > (unsigned long)high_memory && high_memory != 0))
+	if (sp < PAGE_OFFSET ||
+	    (sp > (unsigned long)high_memory && high_memory != NULL))
 		return -EFAULT;
 
 	return 0;
@@ -328,17 +327,6 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 		get_user(instr, (u32 __user *)pc);
 	}
 
-#ifdef CONFIG_KPROBES
-	/*
-	 * It is possible to have recursive kprobes, so we can't call
-	 * the kprobe trap handler with the undef_lock held.
-	 */
-	if (instr == KPROBE_BREAKPOINT_INSTRUCTION && !user_mode(regs)) {
-		kprobe_trap_handler(regs, instr);
-		return;
-	}
-#endif
-
 	if (call_undef_hook(regs, instr) == 0)
 		return;
 
diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c
index 180000b..17127db 100644
--- a/arch/arm/kernel/xscale-cp0.c
+++ b/arch/arm/kernel/xscale-cp0.c
@@ -14,8 +14,8 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <asm/thread_notify.h>
-#include <asm/io.h>
 
 static inline void dsp_save_state(u32 *state)
 {
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
index 55e57a1..1154d92 100644
--- a/arch/arm/lib/ashldi3.S
+++ b/arch/arm/lib/ashldi3.S
@@ -47,3 +47,5 @@ ENTRY(__aeabi_llsl)
 	mov	al, al, lsl r2
 	mov	pc, lr
 
+ENDPROC(__ashldi3)
+ENDPROC(__aeabi_llsl)
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
index 0b31398..9f8b355 100644
--- a/arch/arm/lib/ashrdi3.S
+++ b/arch/arm/lib/ashrdi3.S
@@ -47,3 +47,5 @@ ENTRY(__aeabi_lasr)
 	mov	ah, ah, asr r2
 	mov	pc, lr
 
+ENDPROC(__ashrdi3)
+ENDPROC(__aeabi_lasr)
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index 84dc890..b0951d0 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -30,6 +30,8 @@ ENTRY(c_backtrace)
 
 #if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
 		mov	pc, lr
+ENDPROC(__backtrace)
+ENDPROC(c_backtrace)
 #else
 		stmfd	sp!, {r4 - r8, lr}	@ Save an extra register so we have a location...
 		movs	frame, r0		@ if frame pointer is zero
@@ -103,6 +105,8 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 		mov	r1, frame
 		bl	printk
 no_frame:	ldmfd	sp!, {r4 - r8, pc}
+ENDPROC(__backtrace)
+ENDPROC(c_backtrace)
 		
 		.section __ex_table,"a"
 		.align	3
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index 389567c..80f3115 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -19,3 +19,5 @@ ENTRY(_change_bit_be)
 		eor	r0, r0, #0x18		@ big endian byte ordering
 ENTRY(_change_bit_le)
 	bitop	eor
+ENDPROC(_change_bit_be)
+ENDPROC(_change_bit_le)
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index ecb28dc..4d6bc71 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -41,9 +41,10 @@ USER(		strplt	r2, [r0], #4)
 USER(		strnebt	r2, [r0], #1)
 USER(		strnebt	r2, [r0], #1)
 		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
-USER(		strnebt	r2, [r0], #1)
+USER(		strnebt	r2, [r0])
 		mov	r0, #0
 		ldmfd	sp!, {r1, pc}
+ENDPROC(__clear_user)
 
 		.section .fixup,"ax"
 		.align	0
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index 3475165..1a63e43 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -20,3 +20,5 @@ ENTRY(_clear_bit_be)
 		eor	r0, r0, #0x18		@ big endian byte ordering
 ENTRY(_clear_bit_le)
 	bitop	bic
+ENDPROC(_clear_bit_be)
+ENDPROC(_clear_bit_le)
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 6b7363c..56799a1 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -87,6 +87,8 @@ ENTRY(__copy_from_user)
 
 #include "copy_template.S"
 
+ENDPROC(__copy_from_user)
+
 	.section .fixup,"ax"
 	.align 0
 	copy_abort_preamble
diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S
index 666c99c..6ae04db 100644
--- a/arch/arm/lib/copy_page.S
+++ b/arch/arm/lib/copy_page.S
@@ -44,3 +44,4 @@ ENTRY(copy_page)
 	PLD(	ldmeqia r1!, {r3, r4, ip, lr}	)
 	PLD(	beq	2b			)
 		ldmfd	sp!, {r4, pc}			@	3
+ENDPROC(copy_page)
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 5224d94..22f968b 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -90,6 +90,8 @@ ENTRY(__copy_to_user)
 
 #include "copy_template.S"
 
+ENDPROC(__copy_to_user)
+
 	.section .fixup,"ax"
 	.align 0
 	copy_abort_preamble
diff --git a/arch/arm/lib/csumipv6.S b/arch/arm/lib/csumipv6.S
index 9621469..3ac6ef0 100644
--- a/arch/arm/lib/csumipv6.S
+++ b/arch/arm/lib/csumipv6.S
@@ -29,4 +29,5 @@ ENTRY(__csum_ipv6_magic)
 		adcs	r0, r0, r2
 		adcs	r0, r0, #0
 		ldmfd	sp!, {pc}
+ENDPROC(__csum_ipv6_magic)
 
diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S
index a78dae5..31d3cb3 100644
--- a/arch/arm/lib/csumpartial.S
+++ b/arch/arm/lib/csumpartial.S
@@ -139,3 +139,4 @@ ENTRY(csum_partial)
 		tst	len, #0x1c
 		bne	4b
 		b	.Lless4
+ENDPROC(csum_partial)
diff --git a/arch/arm/lib/csumpartialcopy.S b/arch/arm/lib/csumpartialcopy.S
index 21effe0..d03fc71 100644
--- a/arch/arm/lib/csumpartialcopy.S
+++ b/arch/arm/lib/csumpartialcopy.S
@@ -18,13 +18,11 @@
  */
 
 		.macro	save_regs
-		mov	ip, sp
-		stmfd	sp!, {r1, r4 - r8, fp, ip, lr, pc}
-		sub	fp, ip, #4
+		stmfd	sp!, {r1, r4 - r8, lr}
 		.endm
 
 		.macro	load_regs
-		ldmfd	sp, {r1, r4 - r8, fp, sp, pc}
+		ldmfd	sp!, {r1, r4 - r8, pc}
 		.endm
 
 		.macro	load1b, reg1
@@ -50,5 +48,6 @@
 		.endm
 
 #define FN_ENTRY	ENTRY(csum_partial_copy_nocheck)
+#define FN_EXIT		ENDPROC(csum_partial_copy_nocheck)
 
 #include "csumpartialcopygeneric.S"
diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S
index c50e8f5..d620a5f 100644
--- a/arch/arm/lib/csumpartialcopygeneric.S
+++ b/arch/arm/lib/csumpartialcopygeneric.S
@@ -329,3 +329,4 @@ FN_ENTRY
 		adcs	sum, sum, r4, push #24
 		mov	r5, r4, get_byte_1
 		b	.Lexit
+FN_EXIT
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index c3b93e2..14677fb 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -18,13 +18,11 @@
 		.text
 
 		.macro	save_regs
-		mov	ip, sp
-		stmfd	sp!, {r1 - r2, r4 - r8, fp, ip, lr, pc}
-		sub	fp, ip, #4
+		stmfd	sp!, {r1, r2, r4 - r8, lr}
 		.endm
 
 		.macro	load_regs
-		ldmfd	sp, {r1, r2, r4-r8, fp, sp, pc}
+		ldmfd	sp!, {r1, r2, r4 - r8, pc}
 		.endm
 
 		.macro	load1b,	reg1
@@ -82,6 +80,7 @@
  */
 
 #define FN_ENTRY	ENTRY(csum_partial_copy_from_user)
+#define FN_EXIT		ENDPROC(csum_partial_copy_from_user)
 
 #include "csumpartialcopygeneric.S"
 
diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S
index 930a702..8d6a876 100644
--- a/arch/arm/lib/delay.S
+++ b/arch/arm/lib/delay.S
@@ -60,3 +60,6 @@ ENTRY(__delay)
 #endif
 		bhi	__delay
 		mov	pc, lr
+ENDPROC(__udelay)
+ENDPROC(__const_udelay)
+ENDPROC(__delay)
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index 58eef66..1425e78 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -198,3 +198,4 @@ ENTRY(__do_div64)
 	mov	xh, #0
 	ldr	pc, [sp], #8
 
+ENDPROC(__do_div64)
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index a5ca024..8c4defc 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -33,6 +33,7 @@ ENTRY(_find_first_zero_bit_le)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
+ENDPROC(_find_first_zero_bit_le)
 
 /*
  * Purpose  : Find next 'zero' bit
@@ -50,6 +51,7 @@ ENTRY(_find_next_zero_bit_le)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
+ENDPROC(_find_next_zero_bit_le)
 
 /*
  * Purpose  : Find a 'one' bit
@@ -67,6 +69,7 @@ ENTRY(_find_first_bit_le)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
+ENDPROC(_find_first_bit_le)
 
 /*
  * Purpose  : Find next 'one' bit
@@ -83,6 +86,7 @@ ENTRY(_find_next_bit_le)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
+ENDPROC(_find_next_bit_le)
 
 #ifdef __ARMEB__
 
@@ -99,6 +103,7 @@ ENTRY(_find_first_zero_bit_be)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
+ENDPROC(_find_first_zero_bit_be)
 
 ENTRY(_find_next_zero_bit_be)
 		teq	r1, #0
@@ -113,6 +118,7 @@ ENTRY(_find_next_zero_bit_be)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
+ENDPROC(_find_next_zero_bit_be)
 
 ENTRY(_find_first_bit_be)
 		teq	r1, #0
@@ -127,6 +133,7 @@ ENTRY(_find_first_bit_be)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
+ENDPROC(_find_first_bit_be)
 
 ENTRY(_find_next_bit_be)
 		teq	r1, #0
@@ -140,6 +147,7 @@ ENTRY(_find_next_bit_be)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
+ENDPROC(_find_next_bit_be)
 
 #endif
 
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 2034d4d..6763088 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -26,16 +26,16 @@
  * Note that ADDR_LIMIT is either 0 or 0xc0000000.
  * Note also that it is intended that __get_user_bad is not global.
  */
+#include <linux/linkage.h>
 #include <asm/errno.h>
 
-	.global	__get_user_1
-__get_user_1:
+ENTRY(__get_user_1)
 1:	ldrbt	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
+ENDPROC(__get_user_1)
 
-	.global	__get_user_2
-__get_user_2:
+ENTRY(__get_user_2)
 2:	ldrbt	r2, [r0], #1
 3:	ldrbt	r3, [r0]
 #ifndef __ARMEB__
@@ -45,17 +45,19 @@ __get_user_2:
 #endif
 	mov	r0, #0
 	mov	pc, lr
+ENDPROC(__get_user_2)
 
-	.global	__get_user_4
-__get_user_4:
+ENTRY(__get_user_4)
 4:	ldrt	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
+ENDPROC(__get_user_4)
 
 __get_user_bad:
 	mov	r2, #0
 	mov	r0, #-EFAULT
 	mov	pc, lr
+ENDPROC(__get_user_bad)
 
 .section __ex_table, "a"
 	.long	1b, __get_user_bad
diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S
index fb966ad..9f42389 100644
--- a/arch/arm/lib/io-readsb.S
+++ b/arch/arm/lib/io-readsb.S
@@ -120,3 +120,4 @@ ENTRY(__raw_readsb)
 		strgtb	r3, [r1]
 
 		ldmfd	sp!, {r4 - r6, pc}
+ENDPROC(__raw_readsb)
diff --git a/arch/arm/lib/io-readsl.S b/arch/arm/lib/io-readsl.S
index 75a9121..5fb97e7 100644
--- a/arch/arm/lib/io-readsl.S
+++ b/arch/arm/lib/io-readsl.S
@@ -76,3 +76,4 @@ ENTRY(__raw_readsl)
 8:		mov	r3, ip, get_byte_0
 		strb	r3, [r1, #0]
 		mov	pc, lr
+ENDPROC(__raw_readsl)
diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S
index 4db1c5f..1f393d4 100644
--- a/arch/arm/lib/io-readsw-armv4.S
+++ b/arch/arm/lib/io-readsw-armv4.S
@@ -128,3 +128,4 @@ ENTRY(__raw_readsw)
    _BE_ONLY_(	movne	ip, ip, lsr #24		)
 		strneb	ip, [r1]
 		ldmfd	sp!, {r4, pc}
+ENDPROC(__raw_readsw)
diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S
index 7eba2b6..68b92f4 100644
--- a/arch/arm/lib/io-writesb.S
+++ b/arch/arm/lib/io-writesb.S
@@ -91,3 +91,4 @@ ENTRY(__raw_writesb)
 		strgtb	r3, [r0]
 
 		ldmfd	sp!, {r4, r5, pc}
+ENDPROC(__raw_writesb)
diff --git a/arch/arm/lib/io-writesl.S b/arch/arm/lib/io-writesl.S
index f8f14dd..8d3b781 100644
--- a/arch/arm/lib/io-writesl.S
+++ b/arch/arm/lib/io-writesl.S
@@ -64,3 +64,4 @@ ENTRY(__raw_writesl)
 		str	ip, [r0]
 		bne	6b
 		mov	pc, lr
+ENDPROC(__raw_writesl)
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index c8e85bd..d658561 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -94,3 +94,4 @@ ENTRY(__raw_writesw)
 3:		movne	ip, r3, lsr #8
 		strneh	ip, [r0]
 		mov	pc, lr
+ENDPROC(__raw_writesw)
diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S
index 4e492f4..67964bc 100644
--- a/arch/arm/lib/lib1funcs.S
+++ b/arch/arm/lib/lib1funcs.S
@@ -230,6 +230,8 @@ ENTRY(__aeabi_uidiv)
 	mov	r0, r0, lsr r2
 	mov	pc, lr
 
+ENDPROC(__udivsi3)
+ENDPROC(__aeabi_uidiv)
 
 ENTRY(__umodsi3)
 
@@ -245,6 +247,7 @@ ENTRY(__umodsi3)
 
 	mov	pc, lr
 
+ENDPROC(__umodsi3)
 
 ENTRY(__divsi3)
 ENTRY(__aeabi_idiv)
@@ -284,6 +287,8 @@ ENTRY(__aeabi_idiv)
 	rsbmi	r0, r0, #0
 	mov	pc, lr
 
+ENDPROC(__divsi3)
+ENDPROC(__aeabi_idiv)
 
 ENTRY(__modsi3)
 
@@ -305,6 +310,8 @@ ENTRY(__modsi3)
 	rsbmi	r0, r0, #0
 	mov	pc, lr
 
+ENDPROC(__modsi3)
+
 #ifdef CONFIG_AEABI
 
 ENTRY(__aeabi_uidivmod)
@@ -316,6 +323,8 @@ ENTRY(__aeabi_uidivmod)
 	sub	r1, r1, r3
 	mov	pc, lr
 
+ENDPROC(__aeabi_uidivmod)
+
 ENTRY(__aeabi_idivmod)
 
 	stmfd	sp!, {r0, r1, ip, lr}
@@ -325,6 +334,8 @@ ENTRY(__aeabi_idivmod)
 	sub	r1, r1, r3
 	mov	pc, lr
 
+ENDPROC(__aeabi_idivmod)
+
 #endif
 
 Ldiv0:
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
index a86dbdd..99ea338 100644
--- a/arch/arm/lib/lshrdi3.S
+++ b/arch/arm/lib/lshrdi3.S
@@ -47,3 +47,5 @@ ENTRY(__aeabi_llsr)
 	mov	ah, ah, lsr r2
 	mov	pc, lr
 
+ENDPROC(__lshrdi3)
+ENDPROC(__aeabi_llsr)
diff --git a/arch/arm/lib/memchr.S b/arch/arm/lib/memchr.S
index e7ab1ea..1da8699 100644
--- a/arch/arm/lib/memchr.S
+++ b/arch/arm/lib/memchr.S
@@ -23,3 +23,4 @@ ENTRY(memchr)
 	sub	r0, r0, #1
 2:	movne	r0, #0
 	mov	pc, lr
+ENDPROC(memchr)
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index 7e71d67..e0d0026 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -57,3 +57,4 @@ ENTRY(memcpy)
 
 #include "copy_template.S"
 
+ENDPROC(memcpy)
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 2e301b7..1254918 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -196,3 +196,4 @@ ENTRY(memmove)
 
 18:		backward_copy_shift	push=24	pull=8
 
+ENDPROC(memmove)
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index b477d4a..761eefa 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -124,3 +124,4 @@ ENTRY(memset)
 	tst	r2, #1
 	strneb	r1, [r0], #1
 	mov	pc, lr
+ENDPROC(memset)
diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S
index b8f79d8..3fbdef5 100644
--- a/arch/arm/lib/memzero.S
+++ b/arch/arm/lib/memzero.S
@@ -122,3 +122,4 @@ ENTRY(__memzero)
 	tst	r1, #1			@ 1 a byte left over
 	strneb	r2, [r0], #1		@ 1
 	mov	pc, lr			@ 1
+ENDPROC(__memzero)
diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S
index d89c606..36c91b4 100644
--- a/arch/arm/lib/muldi3.S
+++ b/arch/arm/lib/muldi3.S
@@ -43,3 +43,5 @@ ENTRY(__aeabi_lmul)
 	adc	xh, xh, ip, lsr #16
 	mov	pc, lr
 
+ENDPROC(__muldi3)
+ENDPROC(__aeabi_lmul)
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 08ec7df..864f3c1 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -26,16 +26,16 @@
  * Note that ADDR_LIMIT is either 0 or 0xc0000000
  * Note also that it is intended that __put_user_bad is not global.
  */
+#include <linux/linkage.h>
 #include <asm/errno.h>
 
-	.global	__put_user_1
-__put_user_1:
+ENTRY(__put_user_1)
 1:	strbt	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
+ENDPROC(__put_user_1)
 
-	.global	__put_user_2
-__put_user_2:
+ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
 #ifndef __ARMEB__
 2:	strbt	r2, [r0], #1
@@ -46,23 +46,25 @@ __put_user_2:
 #endif
 	mov	r0, #0
 	mov	pc, lr
+ENDPROC(__put_user_2)
 
-	.global	__put_user_4
-__put_user_4:
+ENTRY(__put_user_4)
 4:	strt	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
+ENDPROC(__put_user_4)
 
-	.global	__put_user_8
-__put_user_8:
+ENTRY(__put_user_8)
 5:	strt	r2, [r0], #4
 6:	strt	r3, [r0]
 	mov	r0, #0
 	mov	pc, lr
+ENDPROC(__put_user_8)
 
 __put_user_bad:
 	mov	r0, #-EFAULT
 	mov	pc, lr
+ENDPROC(__put_user_bad)
 
 .section __ex_table, "a"
 	.long	1b, __put_user_bad
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index 83bc23d..1dd7176 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -20,3 +20,5 @@ ENTRY(_set_bit_be)
 		eor	r0, r0, #0x18		@ big endian byte ordering
 ENTRY(_set_bit_le)
 	bitop	orr
+ENDPROC(_set_bit_be)
+ENDPROC(_set_bit_le)
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index 67c2bf4..a16fb20 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -185,6 +185,8 @@ ENTRY(sha_transform)
 
 	ldmfd	sp!, {r4 - r8, pc}
 
+ENDPROC(sha_transform)
+
 .L_sha_K:
 	.word	0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
 
@@ -204,3 +206,4 @@ ENTRY(sha_init)
 	stmia	r0, {r1, r2, r3, ip, lr}
 	ldr	pc, [sp], #4
 
+ENDPROC(sha_init)
diff --git a/arch/arm/lib/strchr.S b/arch/arm/lib/strchr.S
index 9f18d6f..d8f2a1c 100644
--- a/arch/arm/lib/strchr.S
+++ b/arch/arm/lib/strchr.S
@@ -24,3 +24,4 @@ ENTRY(strchr)
 		movne	r0, #0
 		subeq	r0, r0, #1
 		mov	pc, lr
+ENDPROC(strchr)
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 36e3741..330373c 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -31,6 +31,7 @@ USER(	ldrplbt	r3, [r1], #1)
 	sub	r1, r1, #1	@ take NUL character out of count
 2:	sub	r0, r1, ip
 	mov	pc, lr
+ENDPROC(__strncpy_from_user)
 
 	.section .fixup,"ax"
 	.align	0
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 18d8fa4..90bb9d0 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -31,6 +31,7 @@ USER(	ldrbt	r3, [r0], #1)
 	add	r0, r0, #1
 2:	sub	r0, r0, r2
 	mov	pc, lr
+ENDPROC(__strnlen_user)
 
 	.section .fixup,"ax"
 	.align	0
diff --git a/arch/arm/lib/strrchr.S b/arch/arm/lib/strrchr.S
index 538df22..302f20c 100644
--- a/arch/arm/lib/strrchr.S
+++ b/arch/arm/lib/strrchr.S
@@ -23,3 +23,4 @@ ENTRY(strrchr)
 		bne	1b
 		mov	r0, r3
 		mov	pc, lr
+ENDPROC(strrchr)
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index b25dcd2..5c98dc5 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -16,3 +16,5 @@ ENTRY(_test_and_change_bit_be)
 		eor	r0, r0, #0x18		@ big endian byte ordering
 ENTRY(_test_and_change_bit_le)
 	testop	eor, strb
+ENDPROC(_test_and_change_bit_be)
+ENDPROC(_test_and_change_bit_le)
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 2dcc4b1..543d709 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -16,3 +16,5 @@ ENTRY(_test_and_clear_bit_be)
 		eor	r0, r0, #0x18		@ big endian byte ordering
 ENTRY(_test_and_clear_bit_le)
 	testop	bicne, strneb
+ENDPROC(_test_and_clear_bit_be)
+ENDPROC(_test_and_clear_bit_le)
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 9011c96..0b3f390 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -16,3 +16,5 @@ ENTRY(_test_and_set_bit_be)
 		eor	r0, r0, #0x18		@ big endian byte ordering
 ENTRY(_test_and_set_bit_le)
 	testop	orreq, streqb
+ENDPROC(_test_and_set_bit_be)
+ENDPROC(_test_and_set_bit_le)
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index b48bd6d..ffdd274 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -277,6 +277,7 @@ USER(		strgebt	r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
 USER(		strgtbt	r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
+ENDPROC(__copy_to_user)
 
 		.section .fixup,"ax"
 		.align	0
@@ -542,6 +543,7 @@ USER(		ldrgebt	r3, [r1], #1)			@ May fault
 USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
+ENDPROC(__copy_from_user)
 
 		.section .fixup,"ax"
 		.align	0
diff --git a/arch/arm/lib/ucmpdi2.S b/arch/arm/lib/ucmpdi2.S
index f76de07..f0df6a91 100644
--- a/arch/arm/lib/ucmpdi2.S
+++ b/arch/arm/lib/ucmpdi2.S
@@ -33,6 +33,8 @@ ENTRY(__ucmpdi2)
 	movhi	r0, #2
 	mov	pc, lr
 
+ENDPROC(__ucmpdi2)
+
 #ifdef CONFIG_AEABI
 
 ENTRY(__aeabi_ulcmp)
@@ -44,5 +46,7 @@ ENTRY(__aeabi_ulcmp)
 	movhi	r0, #1
 	mov	pc, lr
 
+ENDPROC(__aeabi_ulcmp)
+
 #endif
 
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a048b92..5aafb2e 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -175,6 +175,15 @@ config MACH_SAM9_L9260
 	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 	  <http://www.olimex.com/dev/sam9-L9260.html>
 
+config MACH_AFEB9260
+	bool "Custom afeb9260 board v1"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using custom afeb9260 board based on
+	  open hardware design. Select this for revision 1 of the board.
+	  <svn://194.85.238.22/home/users/george/svn/arm9eb>
+	  <http://groups.google.com/group/arm9fpga-evolution-board>
+
 config MACH_USB_A9260
 	bool "CALAO USB-A9260"
 	depends on ARCH_AT91SAM9260
@@ -314,6 +323,19 @@ config AT91_PROGRAMMABLE_CLOCKS
 	  Select this if you need to program one or more of the PCK0..PCK3
 	  programmable clock outputs.
 
+config AT91_SLOW_CLOCK
+	bool "Suspend-to-RAM disables main oscillator"
+	depends on SUSPEND
+	help
+	  Select this if you want Suspend-to-RAM to save the most power
+	  possible (without powering off the CPU) by disabling the PLLs
+	  and main oscillator so that only the 32 KiHz clock is available.
+
+	  When only that slow-clock is available, some peripherals lose
+	  functionality.  Many can't issue wakeup events unless faster
+	  clocks are available.  Some lose their operating state and
+	  need to be completely re-initialized.
+
 config AT91_TIMER_HZ
        int "Kernel HZ (jiffies per second)"
        range 32 1024
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 7d641f9..cca612d 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
 obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
 obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
+obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
@@ -64,6 +65,7 @@ obj-y				+= leds.o
 
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 638948c..0fc0ada 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -141,8 +141,8 @@ static struct clk tcb_clk = {
 	.pmc_mask	= 1 << AT91CAP9_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk pwmc_clk = {
-	.name		= "pwmc_clk",
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
 	.pmc_mask	= 1 << AT91CAP9_ID_PWMC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -207,7 +207,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&ssc1_clk,
 	&ac97_clk,
 	&tcb_clk,
-	&pwmc_clk,
+	&pwm_clk,
 	&macb_clk,
 	&aestdes_clk,
 	&adc_clk,
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index abb4aac..5ebd427 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -719,6 +719,60 @@ static void __init at91_add_device_watchdog(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_PWMC,
+		.end	= AT91CAP9_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_PWMC,
+		.end	= AT91CAP9_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_A_periph(AT91_PIN_PB19, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PC29, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PA11, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91cap9_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+
+/* --------------------------------------------------------------------
  *  AC97
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 80bfab5..ada4b67 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -129,8 +129,8 @@ static struct clk tcb_clk = {
 	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk pwmc_clk = {
-	.name		= "pwmc_clk",
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
 	.pmc_mask	= 1 << AT91SAM9263_ID_PWMC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -187,7 +187,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&ssc1_clk,
 	&ac97_clk,
 	&tcb_clk,
-	&pwmc_clk,
+	&pwm_clk,
 	&macb_clk,
 	&twodge_clk,
 	&udc_clk,
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index c93992f..8b88408 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -886,6 +886,59 @@ static void __init at91_add_device_watchdog(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_PWMC,
+		.end	= AT91SAM9263_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_PWMC,
+		.end	= AT91SAM9263_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_B_periph(AT91_PIN_PB7, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PC29, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PB29, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91sam9263_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  SSC -- Synchronous Serial Controller
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 556bddf..252e954 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -131,8 +131,8 @@ static struct clk tc2_clk = {
 	.pmc_mask	= 1 << AT91SAM9RL_ID_TC2,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk pwmc_clk = {
-	.name		= "pwmc_clk",
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
 	.pmc_mask	= 1 << AT91SAM9RL_ID_PWMC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -180,7 +180,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&tc0_clk,
 	&tc1_clk,
 	&tc2_clk,
-	&pwmc_clk,
+	&pwm_clk,
 	&tsc_clk,
 	&dma_clk,
 	&udphs_clk,
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 6208863..87deb1e 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -527,6 +527,51 @@ static void __init at91_add_device_tc(void) { }
 
 
 /* --------------------------------------------------------------------
+ *  Touchscreen
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+
+static struct resource tsadcc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_TSC,
+		.end	= AT91SAM9RL_BASE_TSC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_TSC,
+		.end	= AT91SAM9RL_ID_TSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device at91sam9rl_tsadcc_device = {
+	.name		= "atmel_tsadcc",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &tsadcc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= tsadcc_resources,
+	.num_resources	= ARRAY_SIZE(tsadcc_resources),
+};
+
+void __init at91_add_device_tsadcc(void)
+{
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* AD0_XR */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* AD1_XL */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* AD2_YT */
+	at91_set_A_periph(AT91_PIN_PA20, 0);	/* AD3_TB */
+
+	platform_device_register(&at91sam9rl_tsadcc_device);
+}
+#else
+void __init at91_add_device_tsadcc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTC
  * -------------------------------------------------------------------- */
 
@@ -592,6 +637,59 @@ static void __init at91_add_device_watchdog(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_PWMC,
+		.end	= AT91SAM9RL_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_PWMC,
+		.end	= AT91SAM9RL_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9rl_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PB9, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PD5, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PD8, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91sam9rl_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  SSC -- Synchronous Serial Controller
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 869b5e2..dfff289 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -23,8 +23,8 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/time.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach/time.h>
 #include <mach/at91_tc.h>
 
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
new file mode 100644
index 0000000..9c040c7
--- /dev/null
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -0,0 +1,210 @@
+/*
+ * linux/arch/arm/mach-at91/board-afeb-9260v1.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2008 Sergey Lapin
+ *
+ * A custom board designed as open hardware; PCBs and various information
+ * is available at http://groups.google.com/group/arm9fpga-evolution-board/
+ * Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+
+static void __init afeb9260_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			     ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR
+			   | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init afeb9260_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata afeb9260_usbh_data = {
+	.ports		= 1,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata afeb9260_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info afeb9260_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata afeb9260_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA9,
+	.is_rmii	= 0,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata afeb9260_nand_partition[] = {
+	{
+		.name	= "bootloader",
+		.offset	= 0,
+		.size	= (640 * SZ_1K),
+	},
+	{
+		.name	= "kernel",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_2M,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(afeb9260_nand_partition);
+	return afeb9260_nand_partition;
+}
+
+static struct atmel_nand_data __initdata afeb9260_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+	.bus_width_16	= 0,
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+	.slot_b		= 1,
+	.wire4		= 1,
+};
+
+
+
+static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("fm3130", 0x68),
+		I2C_BOARD_INFO("24c64", 0x50),
+	},
+};
+
+static void __init afeb9260_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&afeb9260_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&afeb9260_udc_data);
+	/* SPI */
+	at91_add_device_spi(afeb9260_spi_devices,
+			ARRAY_SIZE(afeb9260_spi_devices));
+	/* NAND */
+	at91_add_device_nand(&afeb9260_nand_data);
+	/* Ethernet */
+	at91_add_device_eth(&afeb9260_macb_data);
+
+	/* Standard function's pin assignments are not
+	 * appropriate for us and generic code provide
+	 * no API to configure these pins any other way */
+	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
+	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
+	/* MMC */
+	at91_add_device_mmc(0, &afeb9260_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(afeb9260_i2c_devices,
+			ARRAY_SIZE(afeb9260_i2c_devices));
+}
+
+MACHINE_START(AFEB9260, "Custom afeb9260 board")
+	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= afeb9260_map_io,
+	.init_irq	= afeb9260_init_irq,
+	.init_machine	= afeb9260_board_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 1961995..201b893 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -214,7 +214,7 @@ static struct physmap_flash_data cap9adk_nor_data = {
 };
 
 #define NOR_BASE	AT91_CHIPSELECT_0
-#define NOR_SIZE	0x800000
+#define NOR_SIZE	SZ_8M
 
 static struct resource nor_flash_resources[] = {
 	{
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index afa1ff0..db1f954 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -25,7 +25,6 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,6 +33,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -114,6 +114,30 @@ static struct spi_board_info carmeva_spi_devices[] = {
 	},
 };
 
+static struct gpio_led carmeva_leds[] = {
+	{ /* "user led 1", LED9 */
+		.name			= "led9",
+		.gpio			= AT91_PIN_PA21,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{ /* "user led 2", LED10 */
+		.name			= "led10",
+		.gpio			= AT91_PIN_PA25,
+		.active_low		= 1,
+	},
+	{ /* "user led 3", LED11 */
+		.name			= "led11",
+		.gpio			= AT91_PIN_PA26,
+		.active_low		= 1,
+	},
+	{ /* "user led 4", LED12 */
+		.name			= "led12",
+		.gpio			= AT91_PIN_PA18,
+		.active_low		= 1,
+	}
+};
+
 static void __init carmeva_board_init(void)
 {
 	/* Serial */
@@ -132,6 +156,8 @@ static void __init carmeva_board_init(void)
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
 	at91_add_device_mmc(0, &carmeva_mmc_data);
+	/* LEDs */
+	at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
 }
 
 MACHINE_START(CARMEVA, "Carmeva")
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index cb7c9a8..fea2529 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,6 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,6 +36,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -114,7 +114,7 @@ static struct spi_board_info csb337_spi_devices[] = {
 };
 
 #define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	0x800000
+#define CSB_FLASH_SIZE	SZ_8M
 
 static struct mtd_partition csb_flash_partitions[] = {
 	{
@@ -193,11 +193,11 @@ static struct platform_device csb300_button_device = {
 
 static void __init csb300_add_device_buttons(void)
 {
-	at91_set_gpio_input(AT91_PIN_PB29, 0);	/* sw0 */
+	at91_set_gpio_input(AT91_PIN_PB29, 1);	/* sw0 */
 	at91_set_deglitch(AT91_PIN_PB29, 1);
-	at91_set_gpio_input(AT91_PIN_PB28, 0);	/* sw1 */
+	at91_set_gpio_input(AT91_PIN_PB28, 1);	/* sw1 */
 	at91_set_deglitch(AT91_PIN_PB28, 1);
-	at91_set_gpio_input(AT91_PIN_PA21, 0);	/* sw2 */
+	at91_set_gpio_input(AT91_PIN_PA21, 1);	/* sw2 */
 	at91_set_deglitch(AT91_PIN_PA21, 1);
 
 	platform_device_register(&csb300_button_device);
@@ -224,7 +224,7 @@ static struct gpio_led csb_leds[] = {
 		.gpio			= AT91_PIN_PB0,
 		.active_low		= 1,
 		.default_trigger	= "ide-disk",
-	},
+	}
 };
 
 
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 8db8bd8..cfa3f04 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -25,7 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,6 +33,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -72,7 +72,7 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 };
 
 #define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	0x1000000
+#define CSB_FLASH_SIZE	SZ_16M
 
 static struct mtd_partition csb_flash_partitions[] = {
 	{
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 43e1aa7..0fd0f5b 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -157,7 +157,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
 };
 
 #define DK_FLASH_BASE	AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE	0x200000
+#define DK_FLASH_SIZE	SZ_2M
 
 static struct physmap_flash_data dk_flash_data = {
 	.width		= 2,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index bfeee8a2..1d69908 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -86,7 +86,7 @@ static struct mtd_partition __initdata my_flash0_partitions[] =
 	{	/* 0x8400 */
 		.name	= "Darrell-loader",
 		.offset	= 0,
-		.size	= 12* 1056,
+		.size	= 12 * 1056,
 	},
 	{
 		.name	= "U-boot",
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 60626e7..4cdfaac 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -29,7 +29,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -116,7 +116,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 };
 
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	0x200000
+#define EK_FLASH_SIZE	SZ_2M
 
 static struct physmap_flash_data ek_flash_data = {
 	.width		= 2,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index dbc912d..859727e 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -105,7 +105,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
 // };
 
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
-#define PICOTUX200_FLASH_SIZE	0x400000
+#define PICOTUX200_FLASH_SIZE	SZ_4M
 
 static struct physmap_flash_data picotux200_flash_data = {
 	.width	= 2,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 4c28413..cfb4571 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -30,7 +30,6 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,6 +38,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -119,18 +119,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Uboot & Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 };
 
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index e4910cb..99bb4cc 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -126,11 +126,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Bootloader Area",
 		.offset	= 0,
-		.size	= 10 * 1024 * 1024,
+		.size	= 10 * SZ_1M,
 	},
 	{
 		.name	= "User Area",
-		.offset	= 10 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index cb20e70..b49eb6e 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -27,8 +27,10 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,6 +39,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -163,11 +166,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -222,6 +225,73 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+	.byte_len	= SZ_512K / 8,
+	.page_size	= 128,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+		.platform_data = &at24c512,
+	},
+	/* more devices can be added using expansion connectors */
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA30,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA31,
+		.code		= BTN_4,
+		.desc		= "Button 4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA30, 1);
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
+	at91_set_deglitch(AT91_PIN_PA31, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -239,12 +309,14 @@ static void __init ek_board_init(void)
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* SSC (to AT73C213) */
 	at73c213_set_clk(&at73c213_data);
 	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 1a9963b8..4977409 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -35,7 +35,6 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -44,6 +43,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -168,11 +168,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024 ,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -435,24 +435,28 @@ static struct gpio_keys_button ek_buttons[] = {
 		.code		= BTN_0,
 		.desc		= "Button 0",
 		.active_low	= 1,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PA26,
 		.code		= BTN_1,
 		.desc		= "Button 1",
 		.active_low	= 1,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PA25,
 		.code		= BTN_2,
 		.desc		= "Button 2",
 		.active_low	= 1,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PA24,
 		.code		= BTN_3,
 		.desc		= "Button 3",
 		.active_low	= 1,
+		.wakeup		= 1,
 	}
 };
 
@@ -472,13 +476,13 @@ static struct platform_device ek_button_device = {
 
 static void __init ek_add_device_buttons(void)
 {
-	at91_set_gpio_input(AT91_PIN_PA27, 0);	/* btn0 */
+	at91_set_gpio_input(AT91_PIN_PA27, 1);	/* btn0 */
 	at91_set_deglitch(AT91_PIN_PA27, 1);
-	at91_set_gpio_input(AT91_PIN_PA26, 0);	/* btn1 */
+	at91_set_gpio_input(AT91_PIN_PA26, 1);	/* btn1 */
 	at91_set_deglitch(AT91_PIN_PA26, 1);
-	at91_set_gpio_input(AT91_PIN_PA25, 0);	/* btn2 */
+	at91_set_gpio_input(AT91_PIN_PA25, 1);	/* btn2 */
 	at91_set_deglitch(AT91_PIN_PA25, 1);
-	at91_set_gpio_input(AT91_PIN_PA24, 0);	/* btn3 */
+	at91_set_gpio_input(AT91_PIN_PA24, 1);	/* btn3 */
 	at91_set_deglitch(AT91_PIN_PA24, 1);
 
 	platform_device_register(&ek_button_device);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b1d1196..8354015 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -26,13 +26,14 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/i2c/at24.h>
 #include <linux/fb.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -41,6 +42,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -172,11 +174,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 64 * 1024 * 1024,
+		.size	= SZ_64M,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 64 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -203,12 +205,30 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 
 
 /*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+	.byte_len	= SZ_512K / 8,
+	.page_size	= 128,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+		.platform_data = &at24c512,
+	},
+	/* more devices can be added using expansion connectors */
+};
+
+/*
  * LCD Controller
  */
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static struct fb_videomode at91_tft_vga_modes[] = {
 	{
-	        .name           = "TX09D50VM1CCA @ 60",
+		.name		= "TX09D50VM1CCA @ 60",
 		.refresh	= 60,
 		.xres		= 240,		.yres		= 320,
 		.pixclock	= KHZ2PICOS(4965),
@@ -224,7 +244,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 
 static struct fb_monspecs at91fb_default_monspecs = {
 	.manufacturer	= "HIT",
-	.monitor        = "TX09D70VM1CCA",
+	.monitor	= "TX09D70VM1CCA",
 
 	.modedb		= at91_tft_vga_modes,
 	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
@@ -235,7 +255,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 };
 
 #define AT91SAM9263_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT    \
+					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
 static void at91_lcdc_power_control(int on)
@@ -277,7 +297,7 @@ static struct gpio_keys_button ek_buttons[] = {
 		.active_low	= 1,
 		.desc		= "right_click",
 		.wakeup		= 1,
-	},
+	}
 };
 
 static struct gpio_keys_platform_data ek_button_data = {
@@ -296,9 +316,9 @@ static struct platform_device ek_button_device = {
 
 static void __init ek_add_device_buttons(void)
 {
-	at91_set_GPIO_periph(AT91_PIN_PC5, 0);	/* left button */
+	at91_set_GPIO_periph(AT91_PIN_PC5, 1);	/* left button */
 	at91_set_deglitch(AT91_PIN_PC5, 1);
-	at91_set_GPIO_periph(AT91_PIN_PC4, 0);	/* right button */
+	at91_set_GPIO_periph(AT91_PIN_PC4, 1);	/* right button */
 	at91_set_deglitch(AT91_PIN_PC4, 1);
 
 	platform_device_register(&ek_button_device);
@@ -320,25 +340,32 @@ static struct atmel_ac97_data ek_ac97_data = {
  * LEDs ... these could all be PWM-driven, for variable brightness
  */
 static struct gpio_led ek_leds[] = {
-	{	/* "left" led, green, userled1, pwm1 */
-		.name			= "ds1",
-		.gpio			= AT91_PIN_PB8,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",
-	},
-	{	/* "right" led, green, userled2, pwm2 */
+	{	/* "right" led, green, userled2 (could be driven by pwm2) */
 		.name			= "ds2",
 		.gpio			= AT91_PIN_PC29,
 		.active_low		= 1,
 		.default_trigger	= "nand-disk",
 	},
-	{	/* "power" led, yellow, pwm0 */
+	{	/* "power" led, yellow (could be driven by pwm0) */
 		.name			= "ds3",
 		.gpio			= AT91_PIN_PB7,
 		.default_trigger	= "heartbeat",
 	}
 };
 
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+	/* For now only DS1 is PWM-driven (by pwm1) */
+	{
+		.name			= "ds1",
+		.gpio			= 1,	/* is PWM channel number */
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}
+};
+
 
 static void __init ek_board_init(void)
 {
@@ -360,7 +387,7 @@ static void __init ek_board_init(void)
 	/* NAND */
 	at91_add_device_nand(&ek_nand_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Push Buttons */
@@ -369,6 +396,7 @@ static void __init ek_board_init(void)
 	at91_add_device_ac97(&ek_ac97_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index d4eba5c..b588ead 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -122,16 +122,16 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name   = "Bootstrap",
 		.offset = 0,
-		.size   = 4 * 1024 * 1024,
+		.size   = 4 * SZ_1M,
 	},
 	{
 		.name	= "Partition 1",
-		.offset	= 4 * 1024 * 1024,
-		.size	= 60 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 60 * SZ_1M,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 64 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index c6dce49..2708518 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,7 +18,6 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -27,6 +26,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -81,11 +81,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024 ,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -195,6 +195,8 @@ static void __init ek_board_init(void)
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Touch Screen Controller */
+	at91_add_device_tsadcc();
 }
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index f9d0b65..7c35035 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -30,7 +30,6 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,6 +38,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -93,18 +93,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Uboot & Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	}
 };
 
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 673e5c2..391b566 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -29,7 +29,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -106,18 +106,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Linux Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	}
 };
 
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 36b380a..e22bf05 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -33,7 +33,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,6 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -150,27 +150,27 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
 	{
 		.name	= "AT91 NAND partition 1, boot",
 		.offset	= 0,
-		.size	= 1 * SZ_256K
+		.size	= SZ_256K
 	},
 	{
 		.name	= "AT91 NAND partition 2, kernel",
-		.offset	= 1 * SZ_256K,
-		.size	= 2 * SZ_1M - 1 * SZ_256K
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= (2 * SZ_1M) - SZ_256K
 	},
 	{
 		.name	= "AT91 NAND partition 3, filesystem",
-		.offset	= 2 * SZ_1M,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= 14 * SZ_1M
 	},
 	{
 		.name	= "AT91 NAND partition 4, storage",
-		.offset	= 16 * SZ_1M,
-		.size	= 16 * SZ_1M
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_16M
 	},
 	{
 		.name	= "AT91 NAND partition 5, ext-fs",
-		.offset	= 32 * SZ_1M,
-		.size	= 32 * SZ_1M
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_32M
 	}
 };
 
@@ -193,24 +193,24 @@ static struct atmel_nand_data __initdata yl9200_nand_data = {
  * NOR Flash
  */
 #define YL9200_FLASH_BASE	AT91_CHIPSELECT_0
-#define YL9200_FLASH_SIZE	0x1000000
+#define YL9200_FLASH_SIZE	SZ_16M
 
 static struct mtd_partition yl9200_flash_partitions[] = {
 	{
 		.name		= "Bootloader",
-		.size		= 0x00040000,
 		.offset		= 0,
+		.size		= SZ_256K,
 		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
 	},
 	{
 		.name		= "Kernel",
-		.size		= 0x001C0000,
-		.offset		= 0x00040000,
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= (2 * SZ_1M) - SZ_256K
 	},
 	{
 		.name		= "Filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00200000
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL
 	}
 };
 
@@ -390,10 +390,6 @@ static struct spi_board_info yl9200_spi_devices[] = {
 #if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>
 
-#define AT91_FB_REG_BASE	0x80000000L
-#define AT91_FB_REG_SIZE	0x200
-#define AT91_FB_VMEM_BASE	0x80200000L
-#define AT91_FB_VMEM_SIZE	0x200000L
 
 static void __init yl9200_init_video(void)
 {
@@ -516,29 +512,33 @@ static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
 	{S1DREG_COM_DISP_MODE,		0x01},	/* Display Mode Register, LCD only*/
 };
 
-static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-
 static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
 	.initregs		= yl9200_s1dfb_initregs,
 	.initregssize		= ARRAY_SIZE(yl9200_s1dfb_initregs),
 	.platform_init_video	= yl9200_init_video,
 };
 
+#define YL9200_FB_REG_BASE	AT91_CHIPSELECT_7
+#define YL9200_FB_VMEM_BASE	YL9200_FB_REG_BASE + SZ_2M
+#define YL9200_FB_VMEM_SIZE	SZ_2M
+
 static struct resource yl9200_s1dfb_resource[] = {
 	[0] = {	/* video mem */
 		.name	= "s1d13xxxfb memory",
-		.start	= AT91_FB_VMEM_BASE,
-		.end	= AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+		.start	= YL9200_FB_VMEM_BASE,
+		.end	= YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {	/* video registers */
 		.name	= "s1d13xxxfb registers",
-		.start	= AT91_FB_REG_BASE,
-		.end	= AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+		.start	= YL9200_FB_REG_BASE,
+		.end	= YL9200_FB_REG_BASE + SZ_512 -1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
 
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
+
 static struct platform_device yl9200_s1dfb_device = {
 	.name		= "s1d13806fb",
 	.id		= -1,
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index f5c2847..e434510 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -22,8 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <mach/at91_pmc.h>
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 8392d5b..9b0447c 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -18,8 +18,8 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/hardware.h>
 #include <mach/at91_pio.h>
 #include <mach/gpio.h>
@@ -417,7 +417,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 					gpio_irq_mask(pin);
 				}
 				else
-					desc_handle_irq(pin, gpio);
+					generic_handle_irq(pin);
 			}
 			pin++;
 			gpio++;
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
index 0448ac3..974d0bd 100644
--- a/arch/arm/mach-at91/include/mach/at91_pit.h
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_pit.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Periodic Interval Timer (PIT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
index 7cd1b39..cbd2bf0 100644
--- a/arch/arm/mach-at91/include/mach/at91_rstc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_rstc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Reset Controller (RSTC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h
index 71782e5..7ec75de 100644
--- a/arch/arm/mach-at91/include/mach/at91_rtt.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtt.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_rtt.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Real-time Timer (RTT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index 60be5ae..c4ce07e 100644
--- a/arch/arm/mach-at91/include/mach/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_shdwc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Shutdown Controller (SHDWC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
index 973b452..fecc2e9 100644
--- a/arch/arm/mach-at91/include/mach/at91_wdt.h
+++ b/arch/arm/mach-at91/include/mach/at91_wdt.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_wdt.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Watchdog Timer (WDT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
index bca878f..1499b1c 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -1,6 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
  *
+ *  (C) 2008 Andrew Victor
+ *
  * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
  * Based on AT91CAP9 datasheet revision B.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
index f027de5..020f02e 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -1,6 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
  *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9260 datasheet revision B.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
index db62b1f1..69c6501 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -1,6 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
  *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index 1921181..b726038 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * SDRAM Controllers (SDRAMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index ec6ad13..57de620 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9_smc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Static Memory Controllers (SMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index acd60f2..fb51f0e 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -133,6 +133,16 @@ struct atmel_uart_data {
 extern void __init at91_add_device_serial(void);
 
 /*
+ * PWM
+ */
+#define AT91_PWM0	0
+#define AT91_PWM1	1
+#define AT91_PWM2	2
+#define AT91_PWM3	3
+
+extern void __init at91_add_device_pwm(u32 mask);
+
+/*
  * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
  * platform devices.  Their SSC ID is part of their configuration data,
  * along with information about which SSC signals they should use.
@@ -162,9 +172,13 @@ extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
  /* ISI */
 extern void __init at91_add_device_isi(void);
 
+ /* Touchscreen Controller */
+extern void __init at91_add_device_tsadcc(void);
+
  /* LEDs */
 extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
 /* FIXME: this needs a better location, but gets stuff building again */
 extern int at91_suspend_entering_slow_clock(void);
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
index bda29ccb..36bd55f 100644
--- a/arch/arm/mach-at91/include/mach/irqs.h
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/at91_aic.h>
 
 #define NR_AIC_IRQS 32
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 0410d54..18bdcde 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/atmel_serial.h>
 
 #if defined(CONFIG_AT91_EARLY_DBGU)
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index fec03c5..0415a839 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 
 #include <mach/board.h>
 #include <mach/gpio.h>
@@ -21,15 +22,13 @@
 
 #if defined(CONFIG_NEW_LEDS)
 
-#include <linux/platform_device.h>
-
 /*
  * New cross-platform LED support.
  */
 
 static struct gpio_led_platform_data led_data;
 
-static struct platform_device at91_leds = {
+static struct platform_device at91_gpio_leds_device = {
 	.name			= "leds-gpio",
 	.id			= -1,
 	.dev.platform_data	= &led_data,
@@ -47,7 +46,7 @@ void __init at91_gpio_leds(struct gpio_led *leds, int nr)
 
 	led_data.leds = leds;
 	led_data.num_leds = nr;
-	platform_device_register(&at91_leds);
+	platform_device_register(&at91_gpio_leds_device);
 }
 
 #else
@@ -57,6 +56,44 @@ void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
 
 /* ------------------------------------------------------------------------- */
 
+#if defined (CONFIG_LEDS_ATMEL_PWM)
+
+/*
+ * PWM Leds
+ */
+
+static struct gpio_led_platform_data pwm_led_data;
+
+static struct platform_device at91_pwm_leds_device = {
+	.name			= "leds-atmel-pwm",
+	.id			= -1,
+	.dev.platform_data	= &pwm_led_data,
+};
+
+void __init at91_pwm_leds(struct gpio_led *leds, int nr)
+{
+	int i;
+	u32 pwm_mask = 0;
+
+	if (!nr)
+		return;
+
+	for (i = 0; i < nr; i++)
+		pwm_mask |= (1 << leds[i].gpio);
+
+	pwm_led_data.leds = leds;
+	pwm_led_data.num_leds = nr;
+
+	at91_add_device_pwm(pwm_mask);
+	platform_device_register(&at91_pwm_leds_device);
+}
+#else
+void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
 #if defined(CONFIG_LEDS)
 
 #include <asm/leds.h>
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index ec2fe4c..9bb4f04 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -17,8 +17,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
new file mode 100644
index 0000000..987fab3
--- /dev/null
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -0,0 +1,283 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+ *
+ *  Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+#else
+#include <mach/at91sam9_sdramc.h>
+#endif
+
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define AT91_SDRAMC	AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+
+/*
+ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
+ * clock during suspend by adjusting its prescalar and divisor.
+ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
+ *       are errata regarding adjusting the prescalar and divisor.
+ */
+#undef SLOWDOWN_MASTER_CLOCK
+
+#define MCKRDY_TIMEOUT		1000
+#define MOSCRDY_TIMEOUT 	1000
+#define PLLALOCK_TIMEOUT	1000
+#define PLLBLOCK_TIMEOUT	1000
+
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ */
+	.macro wait_mckrdy
+	mov	r4, #MCKRDY_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_MCKRDY
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ */
+	.macro wait_moscrdy
+	mov	r4, #MOSCRDY_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_MOSCS
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until PLLA has locked.
+ */
+	.macro wait_pllalock
+	mov	r4, #PLLALOCK_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_LOCKA
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until PLLB has locked.
+ */
+	.macro wait_pllblock
+	mov	r4, #PLLBLOCK_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_LOCKB
+	beq	1b
+2:
+	.endm
+
+	.text
+
+ENTRY(at91_slow_clock)
+	/* Save registers on stack */
+	stmfd	sp!, {r0 - r12, lr}
+
+	/*
+	 * Register usage:
+	 *  R1 = Base address of AT91_PMC
+	 *  R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+	 *  R3 = temporary register
+	 *  R4 = temporary register
+	 */
+	ldr	r1, .at91_va_base_pmc
+	ldr	r2, .at91_va_base_sdramc
+
+	/* Drain write buffer */
+	mcr	p15, 0, r0, c7, c10, 4
+
+#ifdef CONFIG_ARCH_AT91RM9200
+	/* Put SDRAM in self-refresh mode */
+	mov	r3, #1
+	str	r3, [r2, #AT91_SDRAMC_SRR]
+#elif defined(CONFIG_ARCH_AT91CAP9)
+	/* Enable SDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	str	r3, .saved_sam9_lpr
+
+	mov	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+#else
+	/* Enable SDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	str	r3, .saved_sam9_lpr
+
+	mov	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+#endif
+
+	/* Save Master clock setting */
+	ldr	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+	str	r3, .saved_mckr
+
+	/*
+	 * Set the Master clock source to slow clock
+	 */
+	bic	r3, r3, #AT91_PMC_CSS
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+
+#ifdef SLOWDOWN_MASTER_CLOCK
+	/*
+	 * Set the Master Clock PRES and MDIV fields.
+	 *
+	 * See AT91RM9200 errata #27 and #28 for details.
+	 */
+	mov	r3, #0
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+#endif
+
+	/* Save PLLA setting and disable it */
+	ldr	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+	str	r3, .saved_pllar
+
+	mov	r3, #AT91_PMC_PLLCOUNT
+	orr	r3, r3, #(1 << 29)		/* bit 29 always set */
+	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+
+	wait_pllalock
+
+	/* Save PLLB setting and disable it */
+	ldr	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+	str	r3, .saved_pllbr
+
+	mov	r3, #AT91_PMC_PLLCOUNT
+	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+
+	wait_pllblock
+
+	/* Turn off the main oscillator */
+	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+	bic	r3, r3, #AT91_PMC_MOSCEN
+	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+
+	/* Wait for interrupt */
+	mcr	p15, 0, r0, c7, c0, 4
+
+	/* Turn on the main oscillator */
+	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+	orr	r3, r3, #AT91_PMC_MOSCEN
+	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+
+	wait_moscrdy
+
+	/* Restore PLLB setting */
+	ldr	r3, .saved_pllbr
+	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+
+	wait_pllblock
+
+	/* Restore PLLA setting */
+	ldr	r3, .saved_pllar
+	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+
+	wait_pllalock
+
+#ifdef SLOWDOWN_MASTER_CLOCK
+	/*
+	 * First set PRES if it was not 0,
+	 * than set CSS and MDIV fields.
+	 *
+	 * See AT91RM9200 errata #27 and #28 for details.
+	 */
+	ldr	r3, .saved_mckr
+	tst	r3, #AT91_PMC_PRES
+	beq	2f
+	and	r3, r3, #AT91_PMC_PRES
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+#endif
+
+	/*
+	 * Restore master clock setting
+	 */
+2:	ldr	r3, .saved_mckr
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+
+#ifdef CONFIG_ARCH_AT91RM9200
+	/* Do nothing - self-refresh is automatically disabled. */
+#elif defined(CONFIG_ARCH_AT91CAP9)
+	/* Restore LPR on AT91CAP9 */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+#else
+	/* Restore LPR on AT91SAM9 */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+#endif
+
+	/* Restore registers, and return */
+	ldmfd	sp!, {r0 - r12, pc}
+
+
+.saved_mckr:
+	.word 0
+
+.saved_pllar:
+	.word 0
+
+.saved_pllbr:
+	.word 0
+
+.saved_sam9_lpr:
+	.word 0
+
+.at91_va_base_pmc:
+	.word AT91_VA_BASE_SYS + AT91_PMC
+
+#ifdef CONFIG_ARCH_AT91RM9200
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS
+#elif defined(CONFIG_ARCH_AT91CAP9)
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC
+#else
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS + AT91_SDRAMC
+#endif
+
+ENTRY(at91_slow_clock_sz)
+	.word .-at91_slow_clock
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 474616d..5f18ecc 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -22,10 +22,10 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/mm.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index aa02aa5..71a80b5 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -22,9 +22,9 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/mm.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index 71c2fa7..98ec30c 100644
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -89,6 +89,8 @@
  * 	node 3:  0xd8000000 - 0xdfffffff
  */
 #define NODE_MEM_SIZE_BITS	24
+#define SECTION_SIZE_BITS	24
+#define MAX_PHYSMEM_BITS	32
 
 #endif
 
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
index a8eade4..24e9615 100644
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -20,9 +20,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
-#include <asm/io.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c
index 38623cf..9a12d85 100644
--- a/arch/arm/mach-clps711x/irq.c
+++ b/arch/arm/mach-clps711x/irq.c
@@ -19,10 +19,10 @@
  */
 #include <linux/init.h>
 #include <linux/list.h>
+#include <linux/io.h>
 
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include <asm/hardware/clps7111.h>
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
index 262c3c3..1512144 100644
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -21,9 +21,9 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index f51f97d..0d94a30 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -22,9 +22,9 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/mm.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index ef1fcd1..d581ef0 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -21,11 +21,11 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/sched.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
-#include <asm/io.h>
 #include <asm/hardware/clps7111.h>
 
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index cc1b821..c3a33b8 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_8250.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -23,7 +24,6 @@
 
 #include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/mach-clps7500/include/mach/irq.h b/arch/arm/mach-clps7500/include/mach/irq.h
index e8da3c5..d02fcf2 100644
--- a/arch/arm/mach-clps7500/include/mach/irq.h
+++ b/arch/arm/mach-clps7500/include/mach/irq.h
@@ -10,8 +10,8 @@
  *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
  */
 
+#include <linux/io.h>
 #include <asm/hardware/iomd.h>
-#include <asm/io.h>
 
 static inline int fixup_irq(unsigned int irq)
 {
diff --git a/arch/arm/mach-clps7500/include/mach/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
index 3326aa9..87b32db 100644
--- a/arch/arm/mach-clps7500/include/mach/memory.h
+++ b/arch/arm/mach-clps7500/include/mach/memory.h
@@ -32,4 +32,12 @@
 #define FLUSH_BASE_PHYS		0x00000000
 #define FLUSH_BASE		0xdf000000
 
+/*
+ * Sparsemem support.  Each section is a maximum of 64MB.  The sections
+ * are offset by 128MB and can cover 128MB, so that gives us a maximum
+ * of 29 physmem bits.
+ */
+#define MAX_PHYSMEM_BITS	29
+#define SECTION_SIZE_BITS	26
+
 #endif
diff --git a/arch/arm/mach-clps7500/include/mach/system.h b/arch/arm/mach-clps7500/include/mach/system.h
index 624fc28..6d325fb 100644
--- a/arch/arm/mach-clps7500/include/mach/system.h
+++ b/arch/arm/mach-clps7500/include/mach/system.h
@@ -6,8 +6,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
+#include <linux/io.h>
 #include <asm/hardware/iomd.h>
-#include <asm/io.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 99ac2e5..4dc4585 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
 
 # Common objects
 obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
-			   gpio.o mux.o
+			   gpio.o mux.o devices.o usb.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 1343557..a957d23 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -13,20 +13,28 @@
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <asm/setup.h>
-#include <asm/io.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
+#include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/i2c.h>
 
 /* other misc. init functions */
 void __init davinci_psc_init(void);
@@ -34,10 +42,10 @@ void __init davinci_irq_init(void);
 void __init davinci_map_common_io(void);
 void __init davinci_init_common_hw(void);
 
-/* NOR Flash base address set to CS0 by default */
-#define NOR_FLASH_PHYS 0x02000000
+#if defined(CONFIG_MTD_PHYSMAP) || \
+    defined(CONFIG_MTD_PHYSMAP_MODULE)
 
-static struct mtd_partition davinci_evm_partitions[] = {
+static struct mtd_partition davinci_evm_norflash_partitions[] = {
 	/* bootloader (U-Boot, etc) in first 4 sectors */
 	{
 		.name		= "bootloader",
@@ -68,32 +76,323 @@ static struct mtd_partition davinci_evm_partitions[] = {
 	}
 };
 
-static struct physmap_flash_data davinci_evm_flash_data = {
+static struct physmap_flash_data davinci_evm_norflash_data = {
 	.width		= 2,
-	.parts		= davinci_evm_partitions,
-	.nr_parts	= ARRAY_SIZE(davinci_evm_partitions),
+	.parts		= davinci_evm_norflash_partitions,
+	.nr_parts	= ARRAY_SIZE(davinci_evm_norflash_partitions),
 };
 
 /* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
  * limits addresses to 16M, so using addresses past 16M will wrap */
-static struct resource davinci_evm_flash_resource = {
-	.start		= NOR_FLASH_PHYS,
-	.end		= NOR_FLASH_PHYS + SZ_16M - 1,
+static struct resource davinci_evm_norflash_resource = {
+	.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+	.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device davinci_evm_flash_device = {
+static struct platform_device davinci_evm_norflash_device = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &davinci_evm_flash_data,
+		.platform_data	= &davinci_evm_norflash_data,
 	},
 	.num_resources	= 1,
-	.resource	= &davinci_evm_flash_resource,
+	.resource	= &davinci_evm_norflash_resource,
+};
+
+#endif
+
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+
+static struct resource ide_resources[] = {
+	{
+		.start          = DAVINCI_CFC_ATA_BASE,
+		.end            = DAVINCI_CFC_ATA_BASE + 0x7ff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = IRQ_IDE,
+		.end            = IRQ_IDE,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ide_dma_mask = DMA_32BIT_MASK;
+
+static struct platform_device ide_dev = {
+	.name           = "palm_bk3710",
+	.id             = -1,
+	.resource       = ide_resources,
+	.num_resources  = ARRAY_SIZE(ide_resources),
+	.dev = {
+		.dma_mask		= &ide_dma_mask,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
+	},
+};
+
+#endif
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * I2C GPIO expanders
+ */
+
+#define PCF_Uxx_BASE(x)	(DAVINCI_N_GPIO + ((x) * 8))
+
+
+/* U2 -- LEDs */
+
+static struct gpio_led evm_leds[] = {
+	{ .name = "DS8", .active_low = 1,
+		.default_trigger = "heartbeat", },
+	{ .name = "DS7", .active_low = 1, },
+	{ .name = "DS6", .active_low = 1, },
+	{ .name = "DS5", .active_low = 1, },
+	{ .name = "DS4", .active_low = 1, },
+	{ .name = "DS3", .active_low = 1, },
+	{ .name = "DS2", .active_low = 1,
+		.default_trigger = "mmc0", },
+	{ .name = "DS1", .active_low = 1,
+		.default_trigger = "ide-disk", },
+};
+
+static const struct gpio_led_platform_data evm_led_data = {
+	.num_leds	= ARRAY_SIZE(evm_leds),
+	.leds		= evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int
+evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+	struct gpio_led *leds = evm_leds;
+	int status;
+
+	while (ngpio--) {
+		leds->gpio = gpio++;
+		leds++;
+	}
+
+	/* what an extremely annoying way to be forced to handle
+	 * device unregistration ...
+	 */
+	evm_led_dev = platform_device_alloc("leds-gpio", 0);
+	platform_device_add_data(evm_led_dev,
+			&evm_led_data, sizeof evm_led_data);
+
+	evm_led_dev->dev.parent = &client->dev;
+	status = platform_device_add(evm_led_dev);
+	if (status < 0) {
+		platform_device_put(evm_led_dev);
+		evm_led_dev = NULL;
+	}
+	return status;
+}
+
+static int
+evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+	if (evm_led_dev) {
+		platform_device_unregister(evm_led_dev);
+		evm_led_dev = NULL;
+	}
+	return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u2 = {
+	.gpio_base	= PCF_Uxx_BASE(0),
+	.setup		= evm_led_setup,
+	.teardown	= evm_led_teardown,
+};
+
+
+/* U18 - A/V clock generator and user switch */
+
+static int sw_gpio;
+
+static ssize_t
+sw_show(struct device *d, struct device_attribute *a, char *buf)
+{
+	char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
+
+	strcpy(buf, s);
+	return strlen(s);
+}
+
+static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
+
+static int
+evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+	int	status;
+
+	/* export dip switch option */
+	sw_gpio = gpio + 7;
+	status = gpio_request(sw_gpio, "user_sw");
+	if (status == 0)
+		status = gpio_direction_input(sw_gpio);
+	if (status == 0)
+		status = device_create_file(&client->dev, &dev_attr_user_sw);
+	else
+		gpio_free(sw_gpio);
+	if (status != 0)
+		sw_gpio = -EINVAL;
+
+	/* audio PLL:  48 kHz (vs 44.1 or 32), single rate (vs double) */
+	gpio_request(gpio + 3, "pll_fs2");
+	gpio_direction_output(gpio + 3, 0);
+
+	gpio_request(gpio + 2, "pll_fs1");
+	gpio_direction_output(gpio + 2, 0);
+
+	gpio_request(gpio + 1, "pll_sr");
+	gpio_direction_output(gpio + 1, 0);
+
+	return 0;
+}
+
+static int
+evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+	gpio_free(gpio + 1);
+	gpio_free(gpio + 2);
+	gpio_free(gpio + 3);
+
+	if (sw_gpio > 0) {
+		device_remove_file(&client->dev, &dev_attr_user_sw);
+		gpio_free(sw_gpio);
+	}
+	return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u18 = {
+	.gpio_base	= PCF_Uxx_BASE(1),
+	.n_latch	= (1 << 3) | (1 << 2) | (1 << 1),
+	.setup		= evm_u18_setup,
+	.teardown	= evm_u18_teardown,
 };
 
+
+/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
+
+static int
+evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+	/* p0 = nDRV_VBUS (initial:  don't supply it) */
+	gpio_request(gpio + 0, "nDRV_VBUS");
+	gpio_direction_output(gpio + 0, 1);
+
+	/* p1 = VDDIMX_EN */
+	gpio_request(gpio + 1, "VDDIMX_EN");
+	gpio_direction_output(gpio + 1, 1);
+
+	/* p2 = VLYNQ_EN */
+	gpio_request(gpio + 2, "VLYNQ_EN");
+	gpio_direction_output(gpio + 2, 1);
+
+	/* p3 = n3V3_CF_RESET (initial: stay in reset) */
+	gpio_request(gpio + 3, "nCF_RESET");
+	gpio_direction_output(gpio + 3, 0);
+
+	/* (p4 unused) */
+
+	/* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
+	gpio_request(gpio + 5, "WLAN_RESET");
+	gpio_direction_output(gpio + 5, 1);
+
+	/* p6 = nATA_SEL (initial: select) */
+	gpio_request(gpio + 6, "nATA_SEL");
+	gpio_direction_output(gpio + 6, 0);
+
+	/* p7 = nCF_SEL (initial: deselect) */
+	gpio_request(gpio + 7, "nCF_SEL");
+	gpio_direction_output(gpio + 7, 1);
+
+	return 0;
+}
+
+static int
+evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+	gpio_free(gpio + 7);
+	gpio_free(gpio + 6);
+	gpio_free(gpio + 5);
+	gpio_free(gpio + 3);
+	gpio_free(gpio + 2);
+	gpio_free(gpio + 1);
+	gpio_free(gpio + 0);
+	return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u35 = {
+	.gpio_base	= PCF_Uxx_BASE(2),
+	.setup		= evm_u35_setup,
+	.teardown	= evm_u35_teardown,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ *  - 0x7f00, 6 bytes Ethernet Address
+ *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
+ *  - ... newer boards may have more
+ */
+static struct at24_platform_data eeprom_info = {
+	.byte_len	= (256*1024) / 8,
+	.page_size	= 64,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("pcf8574", 0x38),
+		.platform_data	= &pcf_data_u2,
+	},
+	{
+		I2C_BOARD_INFO("pcf8574", 0x39),
+		.platform_data	= &pcf_data_u18,
+	},
+	{
+		I2C_BOARD_INFO("pcf8574", 0x3a),
+		.platform_data	= &pcf_data_u35,
+	},
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+	/* ALSO:
+	 * - tvl320aic33 audio codec (0x1b)
+	 * - msp430 microcontroller (0x23)
+	 * - tvp5146 video decoder (0x5d)
+	 */
+};
+
+/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
+ * which requires 100 usec of idle bus after i2c writes sent to it.
+ */
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 20 /* kHz */,
+	.bus_delay	= 100 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
-	&davinci_evm_flash_device,
+#if defined(CONFIG_MTD_PHYSMAP) || \
+    defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&davinci_evm_norflash_device,
+#endif
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+	&ide_dev,
+#endif
 };
 
 static void __init
@@ -106,13 +405,21 @@ static __init void davinci_evm_init(void)
 {
 	davinci_psc_init();
 
-#if defined(CONFIG_BLK_DEV_DAVINCI) || defined(CONFIG_BLK_DEV_DAVINCI_MODULE)
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#if defined(CONFIG_MTD_PHYSMAP) || \
+    defined(CONFIG_MTD_PHYSMAP_MODULE)
 	printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
 	       "but share pins.\n\t Disable IDE for NOR support.\n");
 #endif
+#endif
 
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
+	evm_init_i2c();
+
+	/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+	setup_usb(500, 8);
 }
 
 static __init void davinci_evm_irq_init(void)
@@ -124,7 +431,7 @@ static __init void davinci_evm_irq_init(void)
 MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
 	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (io_p2v(IO_PHYS) >> 18) & 0xfffc,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
 	.map_io	      = davinci_evm_map_io,
 	.init_irq     = davinci_evm_irq_init,
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index d46c69b..28f6dbc 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -16,9 +16,9 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 #include <mach/psc.h>
 #include "clock.h"
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
new file mode 100644
index 0000000..3d4b1de
--- /dev/null
+++ b/arch/arm/mach-davinci/devices.c
@@ -0,0 +1,48 @@
+/*
+ * mach-davinci/devices.c
+ *
+ * DaVinci platform device setup/initialization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+
+static struct resource i2c_resources[] = {
+	{
+		.start		= DAVINCI_I2C_BASE,
+		.end		= DAVINCI_I2C_BASE + 0x40,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_I2C,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device davinci_i2c_device = {
+	.name           = "i2c_davinci",
+	.id             = 1,
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+	.resource	= i2c_resources,
+};
+
+void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
+{
+	davinci_i2c_device.dev.platform_data = pdata;
+	(void) platform_device_register(&davinci_i2c_device);
+}
+
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index c9cb4f0..b49e9d0 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -1,7 +1,7 @@
 /*
  * TI DaVinci GPIO Support
  *
- * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2006-2007 David Brownell
  * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -26,47 +26,45 @@
 
 #include <asm/mach/irq.h>
 
-static DEFINE_SPINLOCK(gpio_lock);
-static DECLARE_BITMAP(gpio_in_use, DAVINCI_N_GPIO);
 
-int gpio_request(unsigned gpio, const char *tag)
-{
-	if (gpio >= DAVINCI_N_GPIO)
-		return -EINVAL;
+static DEFINE_SPINLOCK(gpio_lock);
 
-	if (test_and_set_bit(gpio, gpio_in_use))
-		return -EBUSY;
+struct davinci_gpio {
+	struct gpio_chip	chip;
+	struct gpio_controller	*__iomem regs;
+};
 
-	return 0;
-}
-EXPORT_SYMBOL(gpio_request);
+static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 
-void gpio_free(unsigned gpio)
-{
-	if (gpio >= DAVINCI_N_GPIO)
-		return;
-
-	clear_bit(gpio, gpio_in_use);
-}
-EXPORT_SYMBOL(gpio_free);
 
 /* create a non-inlined version */
-static struct gpio_controller *__iomem gpio2controller(unsigned gpio)
+static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
 {
 	return __gpio_to_controller(gpio);
 }
 
+
+/*--------------------------------------------------------------------------*/
+
 /*
- * Assuming the pin is muxed as a gpio output, set its output value.
+ * board setup code *MUST* set PINMUX0 and PINMUX1 as
+ * needed, and enable the GPIO clock.
  */
-void __gpio_set(unsigned gpio, int value)
+
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
 {
-	struct gpio_controller *__iomem g = gpio2controller(gpio);
+	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+	struct gpio_controller *__iomem g = d->regs;
+	u32 temp;
 
-	__raw_writel(__gpio_mask(gpio), value ? &g->set_data : &g->clr_data);
-}
-EXPORT_SYMBOL(__gpio_set);
+	spin_lock(&gpio_lock);
+	temp = __raw_readl(&g->dir);
+	temp |= (1 << offset);
+	__raw_writel(temp, &g->dir);
+	spin_unlock(&gpio_lock);
 
+	return 0;
+}
 
 /*
  * Read the pin's value (works even if it's set up as output);
@@ -75,61 +73,72 @@ EXPORT_SYMBOL(__gpio_set);
  * Note that changes are synched to the GPIO clock, so reading values back
  * right after you've set them may give old values.
  */
-int __gpio_get(unsigned gpio)
+static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct gpio_controller *__iomem g = gpio2controller(gpio);
+	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+	struct gpio_controller *__iomem g = d->regs;
 
-	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+	return (1 << offset) & __raw_readl(&g->in_data);
 }
-EXPORT_SYMBOL(__gpio_get);
 
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * board setup code *MUST* set PINMUX0 and PINMUX1 as
- * needed, and enable the GPIO clock.
- */
-
-int gpio_direction_input(unsigned gpio)
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct gpio_controller *__iomem g = gpio2controller(gpio);
+	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+	struct gpio_controller *__iomem g = d->regs;
 	u32 temp;
-	u32 mask;
-
-	if (!g)
-		return -EINVAL;
+	u32 mask = 1 << offset;
 
 	spin_lock(&gpio_lock);
-	mask = __gpio_mask(gpio);
 	temp = __raw_readl(&g->dir);
-	temp |= mask;
+	temp &= ~mask;
+	__raw_writel(mask, value ? &g->set_data : &g->clr_data);
 	__raw_writel(temp, &g->dir);
 	spin_unlock(&gpio_lock);
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned gpio, int value)
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+static void
+davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct gpio_controller *__iomem g = gpio2controller(gpio);
-	u32 temp;
-	u32 mask;
+	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+	struct gpio_controller *__iomem g = d->regs;
 
-	if (!g)
-		return -EINVAL;
+	__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
+}
+
+static int __init davinci_gpio_setup(void)
+{
+	int i, base;
+
+	for (i = 0, base = 0;
+			i < ARRAY_SIZE(chips);
+			i++, base += 32) {
+		chips[i].chip.label = "DaVinci";
+
+		chips[i].chip.direction_input = davinci_direction_in;
+		chips[i].chip.get = davinci_gpio_get;
+		chips[i].chip.direction_output = davinci_direction_out;
+		chips[i].chip.set = davinci_gpio_set;
+
+		chips[i].chip.base = base;
+		chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+		if (chips[i].chip.ngpio > 32)
+			chips[i].chip.ngpio = 32;
+
+		chips[i].regs = gpio2controller(base);
+
+		gpiochip_add(&chips[i].chip);
+	}
 
-	spin_lock(&gpio_lock);
-	mask = __gpio_mask(gpio);
-	temp = __raw_readl(&g->dir);
-	temp &= ~mask;
-	__raw_writel(mask, value ? &g->set_data : &g->clr_data);
-	__raw_writel(temp, &g->dir);
-	spin_unlock(&gpio_lock);
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_output);
+pure_initcall(davinci_gpio_setup);
 
+/*--------------------------------------------------------------------------*/
 /*
  * We expect irqs will normally be set up as input pins, but they can also be
  * used as output pins ... which is convenient for testing.
@@ -201,7 +210,6 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 	desc->chip->ack(irq);
 	while (1) {
 		u32		status;
-		struct irq_desc	*gpio;
 		int		n;
 		int		res;
 
@@ -215,12 +223,10 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 
 		/* now demux them to the right lowlevel handler */
 		n = (int)get_irq_data(irq);
-		gpio = &irq_desc[n];
 		while (status) {
 			res = ffs(status);
 			n += res;
-			gpio += res;
-			desc_handle_irq(n - 1, gpio - 1);
+			generic_handle_irq(n - 1);
 			status >>= res;
 		}
 	}
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
index 70608f7..bf067d6 100644
--- a/arch/arm/mach-davinci/id.c
+++ b/arch/arm/mach-davinci/id.c
@@ -13,8 +13,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define JTAG_ID_BASE		0x01c40028
 
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a97dfbb..4b522e5 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -16,4 +16,7 @@ struct sys_timer;
 
 extern struct sys_timer davinci_timer;
 
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index ec151cc..b3a2961 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -14,6 +14,7 @@
 #define	__DAVINCI_GPIO_H
 
 #include <linux/io.h>
+#include <asm-generic/gpio.h>
 #include <mach/hardware.h>
 
 /*
@@ -27,13 +28,16 @@
  * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
  * used as gpios, not with other peripherals.
  *
- * GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation, and maybe
- * for later updates, code should write GPIO(N) or:
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
+ * and maybe for later updates, code should write GPIO(N) or:
  *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
  *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
  *
  * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
  * for now, that's != GPIO(N)
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
  */
 #define	GPIO(X)		(X)		/* 0 <= X <= 70 */
 #define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
@@ -67,11 +71,11 @@ __gpio_to_controller(unsigned gpio)
 	void *__iomem ptr;
 
 	if (gpio < 32)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
 	else if (gpio < 64)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
 	else if (gpio < DAVINCI_N_GPIO)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
 	else
 		ptr = NULL;
 	return ptr;
@@ -83,25 +87,17 @@ static inline u32 __gpio_mask(unsigned gpio)
 }
 
 /* The get/set/clear functions will inline when called with constant
- * parameters, for low-overhead bitbanging.  Illegal constant parameters
- * cause link-time errors.
+ * parameters referencing built-in GPIOs, for low-overhead bitbanging.
  *
- * Otherwise, calls with variable parameters use outlined functions.
+ * Otherwise, calls with variable parameters or referencing external
+ * GPIOs (e.g. on GPIO expander chips) use outlined functions.
  */
-extern int __error_inval_gpio(void);
-
-extern void __gpio_set(unsigned gpio, int value);
-extern int __gpio_get(unsigned gpio);
-
 static inline void gpio_set_value(unsigned gpio, int value)
 {
-	if (__builtin_constant_p(value)) {
+	if (__builtin_constant_p(value) && gpio < DAVINCI_N_GPIO) {
 		struct gpio_controller	*__iomem g;
 		u32			mask;
 
-		if (gpio >= DAVINCI_N_GPIO)
-			__error_inval_gpio();
-
 		g = __gpio_to_controller(gpio);
 		mask = __gpio_mask(gpio);
 		if (value)
@@ -111,48 +107,47 @@ static inline void gpio_set_value(unsigned gpio, int value)
 		return;
 	}
 
-	__gpio_set(gpio, value);
+	__gpio_set_value(gpio, value);
 }
 
 /* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs.
+ * as outputs, at least for built-in GPIOs.
  *
- * NOTE: changes in reported values are synchronized to the GPIO clock.
- * This is most easily seen after calling gpio_set_value() and then immediatly
- * gpio_get_value(), where the gpio_get_value() would return the old value
- * until the GPIO clock ticks and the new value gets latched.
+ * NOTE: for built-in GPIOs, changes in reported values are synchronized
+ * to the GPIO clock.  This is easily seen after calling gpio_set_value()
+ * and then immediately gpio_get_value(), where the gpio_get_value() will
+ * return the old value until the GPIO clock ticks and the new value gets
+ * latched.
  */
-
 static inline int gpio_get_value(unsigned gpio)
 {
-	struct gpio_controller *__iomem g;
-
-	if (!__builtin_constant_p(gpio))
-		return __gpio_get(gpio);
+	struct gpio_controller	*__iomem g;
 
-	if (gpio >= DAVINCI_N_GPIO)
-		return __error_inval_gpio();
+	if (!__builtin_constant_p(gpio) || gpio >= DAVINCI_N_GPIO)
+		return __gpio_get_value(gpio);
 
 	g = __gpio_to_controller(gpio);
-	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+	return __gpio_mask(gpio) & __raw_readl(&g->in_data);
 }
 
-/* powerup default direction is IN */
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-#include <asm-generic/gpio.h>	/* cansleep wrappers */
-
-extern int gpio_request(unsigned gpio, const char *tag);
-extern void gpio_free(unsigned gpio);
+static inline int gpio_cansleep(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && gpio < DAVINCI_N_GPIO)
+		return 0;
+	else
+		return __gpio_cansleep(gpio);
+}
 
 static inline int gpio_to_irq(unsigned gpio)
 {
+	if (gpio >= DAVINCI_N_GPIO)
+		return -EINVAL;
 	return DAVINCI_N_AINTC_IRQ + gpio;
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
+	/* caller guarantees gpio_to_irq() succeeded */
 	return irq - DAVINCI_N_AINTC_IRQ;
 }
 
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index e2f5416..c248e9b 100644
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -14,8 +14,11 @@
 
 /* All frequencies are expressed in kHz */
 struct davinci_i2c_platform_data {
-	unsigned int	bus_freq;	/* standard bus frequency */
-	unsigned int	bus_delay;	/* transaction delay */
+	unsigned int	bus_freq;	/* standard bus frequency (kHz) */
+	unsigned int	bus_delay;	/* post-transaction delay (usec) */
 };
 
+/* for board setup code */
+void davinci_init_i2c(struct davinci_i2c_platform_data *);
+
 #endif /* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index e7accb9..b78ee91 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -22,9 +22,8 @@
 #define IO_OFFSET	0xfd000000 /* Virtual IO = 0xfec00000 */
 #define IO_SIZE		0x00400000
 #define IO_VIRT		(IO_PHYS + IO_OFFSET)
-#define io_p2v(pa)	((pa) + IO_OFFSET)
 #define io_v2p(va)	((va) - IO_OFFSET)
-#define IO_ADDRESS(x)	io_p2v(x)
+#define __IO_ADDRESS(x)	((x) + IO_OFFSET)
 
 /*
  * We don't actually have real ISA nor PCI buses, but there is so many
@@ -35,7 +34,12 @@
 #define __mem_pci(a)		(a)
 #define __mem_isa(a)		(a)
 
-#ifndef __ASSEMBLER__
+#define IO_ADDRESS(pa)          IOMEM(__IO_ADDRESS(pa))
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)                x
+#else
+#define IOMEM(x)                ((void __force __iomem *)(x))
 
 /*
  * Functions to access the DaVinci IO region
@@ -46,34 +50,13 @@
  *	 - DO NOT use hardcoded virtual addresses to allow changing the
  *	   IO address space again if needed
  */
-#define davinci_readb(a)	(*(volatile unsigned char  *)IO_ADDRESS(a))
-#define davinci_readw(a)	(*(volatile unsigned short *)IO_ADDRESS(a))
-#define davinci_readl(a)	(*(volatile unsigned int   *)IO_ADDRESS(a))
-
-#define davinci_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
-#define davinci_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define davinci_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
-
-/* 16 bit uses LDRH/STRH, base +/- offset_8 */
-typedef struct { volatile u16 offset[256]; } __regbase16;
-#define __REGV16(vaddr)		((__regbase16 *)((vaddr)&~0xff)) \
-					->offset[((vaddr)&0xff)>>1]
-#define __REG16(paddr)          __REGV16(io_p2v(paddr))
-
-/* 8/32 bit uses LDR/STR, base +/- offset_12 */
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-#define __REGV8(vaddr)		((__regbase8  *)((vaddr)&~4095)) \
-					->offset[((vaddr)&4095)>>0]
-#define __REG8(paddr)		__REGV8(io_p2v(paddr))
-
-typedef struct { volatile u32 offset[4096]; } __regbase32;
-#define __REGV32(vaddr)		((__regbase32 *)((vaddr)&~4095)) \
-					->offset[((vaddr)&4095)>>2]
-
-#define __REG(paddr)		__REGV32(io_p2v(paddr))
-#else
+#define davinci_readb(a)	__raw_readb(IO_ADDRESS(a))
+#define davinci_readw(a)	__raw_readw(IO_ADDRESS(a))
+#define davinci_readl(a)	__raw_readl(IO_ADDRESS(a))
 
-#define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
+#define davinci_writeb(v, a)	__raw_writeb(v, IO_ADDRESS(a))
+#define davinci_writew(v, a)	__raw_writew(v, IO_ADDRESS(a))
+#define davinci_writel(v, a)	__raw_writel(v, IO_ADDRESS(a))
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index 84ff77a..17ca41d 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 
 extern void davinci_watchdog_reset(void);
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 5bb66b6..299515f 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -11,9 +11,9 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <asm/tlb.h>
-#include <asm/io.h>
 #include <asm/memory.h>
 
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 12ca9f2..38021af 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -22,9 +22,9 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach/irq.h>
 
 #define IRQ_BIT(irq)		((irq) & 0x1f)
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index aa2fc37..58754f0 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -21,8 +21,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/hardware.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index caf101e..3010f99 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -26,8 +26,8 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/serial.h>
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 206e80d..3b9a296 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -15,8 +15,8 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
new file mode 100644
index 0000000..fe182a8
--- /dev/null
+++ b/arch/arm/mach-davinci/usb.c
@@ -0,0 +1,116 @@
+/*
+ * USB
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/musb.h>
+#include <linux/usb/otg.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct musb_hdrc_eps_bits musb_eps[] = {
+	{ "ep1_tx", 8, },
+	{ "ep1_rx", 8, },
+	{ "ep2_tx", 8, },
+	{ "ep2_rx", 8, },
+	{ "ep3_tx", 5, },
+	{ "ep3_rx", 5, },
+	{ "ep4_tx", 5, },
+	{ "ep4_rx", 5, },
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= true,
+	.dyn_fifo	= true,
+	.soft_con	= true,
+	.dma		= true,
+
+	.num_eps	= 5,
+	.dma_channels	= 8,
+	.ram_bits	= 10,
+	.eps_bits	= musb_eps,
+};
+
+static struct musb_hdrc_platform_data usb_data = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	/* OTG requires a Mini-AB connector */
+	.mode           = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+	.mode           = MUSB_PERIPHERAL,
+#elif defined(CONFIG_USB_MUSB_HOST)
+	.mode           = MUSB_HOST,
+#endif
+	.config		= &musb_config,
+};
+
+static struct resource usb_resources[] = {
+	{
+		/* physical address */
+		.start          = DAVINCI_USB_OTG_BASE,
+		.end            = DAVINCI_USB_OTG_BASE + 0x5ff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = IRQ_USBINT,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static u64 usb_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device usb_dev = {
+	.name           = "musb_hdrc",
+	.id             = -1,
+	.dev = {
+		.platform_data		= &usb_data,
+		.dma_mask		= &usb_dmamask,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
+	},
+	.resource       = usb_resources,
+	.num_resources  = ARRAY_SIZE(usb_resources),
+};
+
+#ifdef CONFIG_USB_MUSB_OTG
+
+static struct otg_transceiver *xceiv;
+
+struct otg_transceiver *otg_get_transceiver(void)
+{
+	if (xceiv)
+		get_device(xceiv->dev);
+	return xceiv;
+}
+EXPORT_SYMBOL(otg_get_transceiver);
+
+int otg_set_transceiver(struct otg_transceiver *x)
+{
+	if (xceiv && x)
+		return -EBUSY;
+	xceiv = x;
+	return 0;
+}
+EXPORT_SYMBOL(otg_set_transceiver);
+
+#endif
+
+void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+{
+	usb_data.power = mA / 2;
+	usb_data.potpgt = potpgt_msec / 2;
+	platform_device_register(&usb_dev);
+}
+
+#else
+
+void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+{
+}
+
+#endif  /* CONFIG_USB_MUSB_HDRC */
+
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 65cc7c2..c7bc7fb 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -14,10 +14,10 @@
 #include <linux/interrupt.h>
 #include <linux/serial_8250.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index 53748f5..c52e304 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -23,9 +23,9 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/page.h>
 
 static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr)
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index ea8549b..5a1b8c0 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -88,6 +88,20 @@ config MACH_TS72XX
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.
 
+choice
+	prompt "Select a UART for early kernel messages"
+
+config EP93XX_EARLY_UART1
+	bool "UART1"
+
+config EP93XX_EARLY_UART2
+	bool "UART2"
+
+config EP93XX_EARLY_UART3
+	bool "UART3"
+
+endchoice
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index aa1fb35..561db73 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -18,7 +18,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -47,36 +47,12 @@ static struct ep93xx_eth_data adssphere_eth_data = {
 	.phy_id		= 1,
 };
 
-static struct resource adssphere_eth_resource[] = {
-	{
-		.start	= EP93XX_ETHERNET_PHYS_BASE,
-		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_ETHERNET,
-		.end	= IRQ_EP93XX_ETHERNET,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device adssphere_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &adssphere_eth_data,
-	},
-	.num_resources	= 2,
-	.resource	= adssphere_eth_resource,
-};
-
 static void __init adssphere_init_machine(void)
 {
 	ep93xx_init_devices();
 	platform_device_register(&adssphere_flash);
 
-	memcpy(adssphere_eth_data.dev_addr,
-		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	platform_device_register(&adssphere_eth_device);
+	ep93xx_register_eth(&adssphere_eth_data, 1);
 }
 
 MACHINE_START(ADSSPHERE, "ADS Sphere board")
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 6062e47..8c9f249 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -15,9 +15,9 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/string.h>
+#include <linux/io.h>
 #include <asm/div64.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 struct clk {
 	char		*name;
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f99f436..de53f0b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -32,6 +32,7 @@
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
+#include <linux/io.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -41,7 +42,6 @@
 #include <asm/system.h>
 #include <asm/tlbflush.h>
 #include <asm/pgtable.h>
-#include <asm/io.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -157,7 +157,7 @@ static unsigned char gpio_int_type2[3];
 static const u8 int_type1_register_offset[3]	= { 0x90, 0xac, 0x4c };
 static const u8 int_type2_register_offset[3]	= { 0x94, 0xb0, 0x50 };
 static const u8 eoi_register_offset[3]		= { 0x98, 0xb4, 0x54 };
-static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x5c };
+static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x58 };
 
 void ep93xx_gpio_update_int_params(unsigned port)
 {
@@ -192,8 +192,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 	for (i = 0; i < 8; i++) {
 		if (status & (1 << i)) {
 			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
-			desc = irq_desc + gpio_irq;
-			desc_handle_irq(gpio_irq, desc);
+			generic_handle_irq(gpio_irq);
 		}
 	}
 
@@ -202,7 +201,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 		if (status & (1 << i)) {
 			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
 			desc = irq_desc + gpio_irq;
-			desc_handle_irq(gpio_irq, desc);
+			generic_handle_irq(gpio_irq);
 		}
 	}
 }
@@ -217,7 +216,7 @@ static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
 	int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
 	int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
 
-	desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
+	generic_handle_irq(gpio_irq);
 }
 
 static void ep93xx_gpio_irq_ack(unsigned int irq)
@@ -461,6 +460,41 @@ static struct platform_device ep93xx_ohci_device = {
 	.resource	= ep93xx_ohci_resources,
 };
 
+static struct ep93xx_eth_data ep93xx_eth_data;
+
+static struct resource ep93xx_eth_resource[] = {
+	{
+		.start	= EP93XX_ETHERNET_PHYS_BASE,
+		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_EP93XX_ETHERNET,
+		.end	= IRQ_EP93XX_ETHERNET,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device ep93xx_eth_device = {
+	.name		= "ep93xx-eth",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ep93xx_eth_data,
+	},
+	.num_resources	= ARRAY_SIZE(ep93xx_eth_resource),
+	.resource	= ep93xx_eth_resource,
+};
+
+void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
+{
+	if (copy_addr) {
+		memcpy(data->dev_addr,
+			(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+	}
+
+	ep93xx_eth_data = *data;
+	platform_device_register(&ep93xx_eth_device);
+}
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
index 97550c0..e4add5b 100644
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -18,7 +18,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -43,10 +43,16 @@ static struct platform_device edb9302_flash = {
 	.resource	= &edb9302_flash_resource,
 };
 
+static struct ep93xx_eth_data edb9302_eth_data = {
+	.phy_id		= 1,
+};
+
 static void __init edb9302_init_machine(void)
 {
 	ep93xx_init_devices();
 	platform_device_register(&edb9302_flash);
+
+	ep93xx_register_eth(&edb9302_eth_data, 1);
 }
 
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
index 99b01d4..02c4405 100644
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ b/arch/arm/mach-ep93xx/edb9302a.c
@@ -18,7 +18,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -47,36 +47,12 @@ static struct ep93xx_eth_data edb9302a_eth_data = {
 	.phy_id			= 1,
 };
 
-static struct resource edb9302a_eth_resource[] = {
-	{
-		.start	= EP93XX_ETHERNET_PHYS_BASE,
-		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_ETHERNET,
-		.end	= IRQ_EP93XX_ETHERNET,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device edb9302a_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &edb9302a_eth_data,
-	},
-	.num_resources	= 2,
-	.resource	= edb9302a_eth_resource,
-};
-
 static void __init edb9302a_init_machine(void)
 {
 	ep93xx_init_devices();
 	platform_device_register(&edb9302a_flash);
 
-	memcpy(edb9302a_eth_data.dev_addr,
-		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	platform_device_register(&edb9302a_eth_device);
+	ep93xx_register_eth(&edb9302a_eth_data, 1);
 }
 
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
index 9fb72d0..040edbd 100644
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ b/arch/arm/mach-ep93xx/edb9307.c
@@ -18,7 +18,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -47,36 +47,12 @@ static struct ep93xx_eth_data edb9307_eth_data = {
 	.phy_id			= 1,
 };
 
-static struct resource edb9307_eth_resource[] = {
-	{
-		.start	= EP93XX_ETHERNET_PHYS_BASE,
-		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_ETHERNET,
-		.end	= IRQ_EP93XX_ETHERNET,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device edb9307_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &edb9307_eth_data,
-	},
-	.num_resources	= 2,
-	.resource	= edb9307_eth_resource,
-};
-
 static void __init edb9307_init_machine(void)
 {
 	ep93xx_init_devices();
 	platform_device_register(&edb9307_flash);
 
-	memcpy(edb9307_eth_data.dev_addr,
-		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	platform_device_register(&edb9307_eth_device);
+	ep93xx_register_eth(&edb9307_eth_data, 1);
 }
 
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
index 87267a5..6853e30 100644
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -19,7 +19,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -44,10 +44,16 @@ static struct platform_device edb9312_flash = {
 	.resource	= &edb9312_flash_resource,
 };
 
+static struct ep93xx_eth_data edb9312_eth_data = {
+	.phy_id			= 1,
+};
+
 static void __init edb9312_init_machine(void)
 {
 	ep93xx_init_devices();
 	platform_device_register(&edb9312_flash);
+
+	ep93xx_register_eth(&edb9312_eth_data, 1);
 }
 
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
index 7e37395..9469b35 100644
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ b/arch/arm/mach-ep93xx/edb9315.c
@@ -18,7 +18,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -43,10 +43,16 @@ static struct platform_device edb9315_flash = {
 	.resource	= &edb9315_flash_resource,
 };
 
+static struct ep93xx_eth_data edb9315_eth_data = {
+	.phy_id			= 1,
+};
+
 static void __init edb9315_init_machine(void)
 {
 	ep93xx_init_devices();
 	platform_device_register(&edb9315_flash);
+
+	ep93xx_register_eth(&edb9315_eth_data, 1);
 }
 
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
index 08a7c9b..584457c 100644
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -18,7 +18,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -47,36 +47,12 @@ static struct ep93xx_eth_data edb9315a_eth_data = {
 	.phy_id			= 1,
 };
 
-static struct resource edb9315a_eth_resource[] = {
-	{
-		.start	= EP93XX_ETHERNET_PHYS_BASE,
-		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_ETHERNET,
-		.end	= IRQ_EP93XX_ETHERNET,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device edb9315a_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &edb9315a_eth_data,
-	},
-	.num_resources	= 2,
-	.resource	= edb9315a_eth_resource,
-};
-
 static void __init edb9315a_init_machine(void)
 {
 	ep93xx_init_devices();
 	platform_device_register(&edb9315a_flash);
 
-	memcpy(edb9315a_eth_data.dev_addr,
-		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	platform_device_register(&edb9315a_eth_device);
+	ep93xx_register_eth(&edb9315a_eth_data, 1);
 }
 
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 9b41ec1..035b24e 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -18,7 +18,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -44,36 +44,15 @@ static struct platform_device gesbc9312_flash = {
 };
 
 static struct ep93xx_eth_data gesbc9312_eth_data = {
-	.phy_id			= 1,
-};
-
-static struct resource gesbc9312_eth_resource[] = {
-	{
-		.start	= EP93XX_ETHERNET_PHYS_BASE,
-		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_ETHERNET,
-		.end	= IRQ_EP93XX_ETHERNET,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device gesbc9312_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &gesbc9312_eth_data,
-	},
-	.num_resources	= 2,
-	.resource	= gesbc9312_eth_resource,
+	.phy_id		= 1,
 };
 
 static void __init gesbc9312_init_machine(void)
 {
 	ep93xx_init_devices();
 	platform_device_register(&gesbc9312_flash);
-	platform_device_register(&gesbc9312_eth_device);
+
+	ep93xx_register_eth(&gesbc9312_eth_data, 0);
 }
 
 MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 0f3fb87..482cf3d 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -16,9 +16,9 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/seq_file.h>
+#include <linux/io.h>
 
 #include <mach/ep93xx-regs.h>
-#include <asm/io.h>
 #include <asm/gpio.h>
 
 struct ep93xx_gpio_chip {
@@ -141,10 +141,10 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = {
 	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0),
 	EP93XX_GPIO_BANK("B", 0x04, 0x14, 8),
-	EP93XX_GPIO_BANK("C", 0x30, 0x34, 40),
+	EP93XX_GPIO_BANK("C", 0x08, 0x18, 40),
 	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24),
 	EP93XX_GPIO_BANK("E", 0x20, 0x24, 32),
-	EP93XX_GPIO_BANK("F", 0x08, 0x18, 16),
+	EP93XX_GPIO_BANK("F", 0x30, 0x34, 16),
 	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48),
 	EP93XX_GPIO_BANK("H", 0x40, 0x44, 56),
 };
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 9f4458c..22d6c9a 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -6,6 +6,40 @@
 #define __ASM_ARCH_EP93XX_REGS_H
 
 /*
+ * EP93xx Physical Memory Map:
+ *
+ * The ASDO pin is sampled at system reset to select a synchronous or
+ * asynchronous boot configuration.  When ASDO is "1" (i.e. pulled-up)
+ * the synchronous boot mode is selected.  When ASDO is "0" (i.e
+ * pulled-down) the asynchronous boot mode is selected.
+ *
+ * In synchronous boot mode nSDCE3 is decoded starting at physical address
+ * 0x00000000 and nCS0 is decoded starting at 0xf0000000.  For asynchronous
+ * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
+ * decoded at 0xf0000000.
+ *
+ * There is known errata for the EP93xx dealing with External Memory
+ * Configurations.  Please refer to "AN273: EP93xx Silicon Rev E Design
+ * Guidelines" for more information.  This document can be found at:
+ *
+ *	http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+ */
+
+#define EP93XX_CS0_PHYS_BASE_ASYNC	0x00000000	/* ASDO Pin = 0 */
+#define EP93XX_SDCE3_PHYS_BASE_SYNC	0x00000000	/* ASDO Pin = 1 */
+#define EP93XX_CS1_PHYS_BASE		0x10000000
+#define EP93XX_CS2_PHYS_BASE		0x20000000
+#define EP93XX_CS3_PHYS_BASE		0x30000000
+#define EP93XX_PCMCIA_PHYS_BASE		0x40000000
+#define EP93XX_CS6_PHYS_BASE		0x60000000
+#define EP93XX_CS7_PHYS_BASE		0x70000000
+#define EP93XX_SDCE0_PHYS_BASE		0xc0000000
+#define EP93XX_SDCE1_PHYS_BASE		0xd0000000
+#define EP93XX_SDCE2_PHYS_BASE		0xe0000000
+#define EP93XX_SDCE3_PHYS_BASE_ASYNC	0xf0000000	/* ASDO Pin = 0 */
+#define EP93XX_CS0_PHYS_BASE_SYNC	0xf0000000	/* ASDO Pin = 1 */
+
+/*
  * EP93xx linux memory map:
  *
  * virt		phys		size
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index b5c1824..db2489d 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,17 +4,17 @@
 
 #ifndef __ASSEMBLY__
 
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
-void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
-
 struct ep93xx_eth_data
 {
 	unsigned char	dev_addr[6];
 	unsigned char	phy_id;
 };
 
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+void ep93xx_init_time(unsigned long);
+void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
+void ep93xx_init_devices(void);
+extern struct sys_timer ep93xx_timer;
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 30b318a..34ddec0 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -70,7 +70,7 @@
 
 
 #ifndef __ASSEMBLY__
-#include <asm/io.h>
+#include <linux/io.h>
 
 static inline int board_is_ts7200(void)
 {
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index 1fd2f17..16026c2 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -31,10 +31,19 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 	*((volatile unsigned int *)ptr) = value;
 }
 
-
-#define PHYS_UART1_DATA		0x808c0000
-#define PHYS_UART1_FLAG		0x808c0018
-#define UART1_FLAG_TXFF		0x20
+#if defined(CONFIG_EP93XX_EARLY_UART1)
+#define UART_BASE		EP93XX_UART1_PHYS_BASE
+#elif defined(CONFIG_EP93XX_EARLY_UART2)
+#define UART_BASE		EP93XX_UART2_PHYS_BASE
+#elif defined(CONFIG_EP93XX_EARLY_UART3)
+#define UART_BASE		EP93XX_UART3_PHYS_BASE
+#else
+#define UART_BASE		EP93XX_UART1_PHYS_BASE
+#endif
+
+#define PHYS_UART_DATA		(UART_BASE + 0x00)
+#define PHYS_UART_FLAG		(UART_BASE + 0x18)
+#define UART_FLAG_TXFF		0x20
 
 static inline void putc(int c)
 {
@@ -42,11 +51,11 @@ static inline void putc(int c)
 
 	for (i = 0; i < 1000; i++) {
 		/* Transmit fifo not full?  */
-		if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
+		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
 			break;
 	}
 
-	__raw_writeb(c, PHYS_UART1_DATA);
+	__raw_writeb(c, PHYS_UART_DATA);
 }
 
 static inline void flush(void)
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index de047a5..c219723 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -16,10 +16,9 @@
 #include <linux/mm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
-
+#include <linux/io.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/io.h>
 #include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
@@ -29,38 +28,9 @@ static struct ep93xx_eth_data micro9_eth_data = {
        .phy_id                 = 0x1f,
 };
 
-static struct resource micro9_eth_resource[] = {
-       {
-               .start  = EP93XX_ETHERNET_PHYS_BASE,
-               .end    = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-               .flags  = IORESOURCE_MEM,
-       }, {
-               .start  = IRQ_EP93XX_ETHERNET,
-               .end    = IRQ_EP93XX_ETHERNET,
-               .flags  = IORESOURCE_IRQ,
-       }
-};
-
-static struct platform_device micro9_eth_device = {
-       .name           = "ep93xx-eth",
-       .id             = -1,
-       .dev            = {
-               .platform_data  = &micro9_eth_data,
-       },
-       .num_resources = ARRAY_SIZE(micro9_eth_resource),
-       .resource       = micro9_eth_resource,
-};
-
-static void __init micro9_eth_init(void)
-{
-       memcpy(micro9_eth_data.dev_addr,
-               (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-       platform_device_register(&micro9_eth_device);
-}
-
 static void __init micro9_init(void)
 {
-       micro9_eth_init();
+	ep93xx_register_eth(&micro9_eth_data, 1);
 }
 
 /*
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c3cbff1..b4aa4c0 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/m48t86.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -161,28 +161,6 @@ static struct ep93xx_eth_data ts72xx_eth_data = {
 	.phy_id			= 1,
 };
 
-static struct resource ts72xx_eth_resource[] = {
-	{
-		.start	= EP93XX_ETHERNET_PHYS_BASE,
-		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_ETHERNET,
-		.end	= IRQ_EP93XX_ETHERNET,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device ts72xx_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ts72xx_eth_data,
-	},
-	.num_resources	= 2,
-	.resource	= ts72xx_eth_resource,
-};
-
 static void __init ts72xx_init_machine(void)
 {
 	ep93xx_init_devices();
@@ -190,9 +168,7 @@ static void __init ts72xx_init_machine(void)
 		platform_device_register(&ts72xx_flash);
 	platform_device_register(&ts72xx_rtc_device);
 
-	memcpy(ts72xx_eth_data.dev_addr,
-		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	platform_device_register(&ts72xx_eth_device);
+	ep93xx_register_eth(&ts72xx_eth_data, 1);
 }
 
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index c261472..6a5b437 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -9,9 +9,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/screen_info.h>
+#include <linux/io.h>
 
 #include <asm/hardware/dec21285.h>
-#include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index b08ab50..818014e 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -13,11 +13,11 @@
 #include <linux/ioport.h>
 #include <linux/list.h>
 #include <linux/init.h>
+#include <linux/io.h>
  
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/hardware/dec21285.h>
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index d0dc51e..d4c1e52 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -16,8 +16,8 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
index 1f9b09b..b653e9c 100644
--- a/arch/arm/mach-footbridge/dma.c
+++ b/arch/arm/mach-footbridge/dma.c
@@ -11,9 +11,9 @@
  *			ISA DMA controllers.
  */
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <asm/dma.h>
-#include <asm/io.h>
 #include <asm/scatterlist.h>
 
 #include <asm/mach/dma.h>
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index e9cae99..6ae2f1a 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -42,10 +42,6 @@ extern unsigned long __bus_to_virt(unsigned long);
 
 #endif
 
-/* Task size and page offset at 3GB */
-#define TASK_SIZE		UL(0xbf000000)
-#define PAGE_OFFSET		UL(0xc0000000)
-
 /*
  * Cache flushing area.
  */
@@ -56,12 +52,6 @@ extern unsigned long __bus_to_virt(unsigned long);
  */
 #define PHYS_OFFSET		UL(0x00000000)
 
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
-
 #define FLUSH_BASE_PHYS		0x50000000
 
 #endif
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 01c9f40..2db7f36 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -7,8 +7,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/io.h>
 #include <asm/hardware/dec21285.h>
-#include <asm/io.h>
 #include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 7132e52..54fec9a 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -18,13 +18,13 @@
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
 #include <asm/hardware/dec21285.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/mach-types.h>
 
 static void isa_mask_pic_lo_irq(unsigned int irq)
@@ -94,8 +94,7 @@ isa_irq_handler(unsigned int irq, struct irq_desc *desc)
 		return;
 	}
 
-	desc = irq_desc + isa_irq;
-	desc_handle_irq(isa_irq, desc);
+	generic_handle_irq(isa_irq);
 }
 
 static struct irqaction irq_cascade = {
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index a764e01..0c83900 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -7,8 +7,8 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index a1f381c..00b0ddc 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -10,9 +10,9 @@
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <asm/hardware/dec21285.h>
-#include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index 004819e..cd1b54f 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -22,9 +22,9 @@
 #include <linux/sched.h>
 #include <linux/mc146818rtc.h>
 #include <linux/bcd.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 #include <asm/mach/time.h>
 #include "common.h"
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index b5f9741..7a26148 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -18,11 +18,11 @@
 #include <linux/mman.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/dma.h>
-#include <asm/io.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
@@ -104,14 +104,12 @@ h720x_gpio_handler(unsigned int mask, unsigned int irq,
                  struct irq_desc *desc)
 {
 	IRQDBG("%s irq: %d\n", __func__, irq);
-	desc = irq_desc + irq;
 	while (mask) {
 		if (mask & 1) {
 			IRQDBG("handling irq %d\n", irq);
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		irq++;
-		desc++;
 		mask >>= 1;
 	}
 }
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index 53e1f62..fd33a19 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -120,12 +120,10 @@ h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
 
 	mask >>= 1;
 	irq = IRQ_TIMER1;
-	desc = irq_desc + irq;
 	while (mask) {
 		if (mask & 1)
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		irq++;
-		desc++;
 		mask >>= 1;
 	}
 }
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
index 4b4230d..7ec60fc 100644
--- a/arch/arm/mach-imx/clock.c
+++ b/arch/arm/mach-imx/clock.c
@@ -21,8 +21,8 @@
 #include <linux/list.h>
 #include <linux/math64.h>
 #include <linux/err.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/imx-regs.h>
 
 /*
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
index eb8d5bd..67812c5a 100644
--- a/arch/arm/mach-imx/include/mach/irqs.h
+++ b/arch/arm/mach-imx/include/mach/irqs.h
@@ -111,6 +111,11 @@
 /* decode irq number to use with IMR(x), ISR(x) and friends */
 #define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
 
+/* all normal IRQs can be FIQs */
+#define FIQ_START	0
+/* switch betwean IRQ and FIQ */
+extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
+
 #define NR_IRQS (IRQ_GPIOD(32) + 1)
 #define IRQ_GPIO(x)
 #endif
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index 798f221..531b95d 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -26,20 +26,17 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/timer.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
 /*
  *
  * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.  FIXME- We should
- * also add support for the accelerated interrupt controller
- * by putting offets to irq jump code in the appropriate
- * places.
+ * to turn on/off specific interrupts.
  *
  */
 
@@ -102,6 +99,28 @@ imx_unmask_irq(unsigned int irq)
 	__raw_writel(irq, IMX_AITC_INTENNUM);
 }
 
+#ifdef CONFIG_FIQ
+int imx_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+	unsigned int irqt;
+
+	if (irq >= IMX_IRQS)
+		return -EINVAL;
+
+	if (irq < IMX_IRQS / 2) {
+		irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
+	} else {
+		irq -= IMX_IRQS / 2;
+		irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_set_irq_fiq);
+#endif /* CONFIG_FIQ */
+
 static int
 imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 {
@@ -182,14 +201,12 @@ static void
 imx_gpio_handler(unsigned int mask, unsigned int irq,
                  struct irq_desc *desc)
 {
-	desc = irq_desc + irq;
 	while (mask) {
 		if (mask & 1) {
 			DEBUG_IRQ("handling irq %d\n", irq);
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		irq++;
-		desc++;
 		mask >>= 1;
 	}
 }
@@ -286,4 +303,9 @@ imx_init_irq(void)
 
 	/* Release masking of interrupts according to priority */
 	__raw_writel(-1, IMX_AITC_NIMASK);
+
+#ifdef CONFIG_FIQ
+	/* Initialize FIQ */
+	init_FIQ();
+#endif
 }
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
index af81621..1d48f27 100644
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ b/arch/arm/mach-imx/leds-mx1ads.c
@@ -13,9 +13,9 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/system.h>
-#include <asm/io.h>
 #include <asm/leds.h>
 #include "leds.h"
 
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 08be387..a11765f 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -18,9 +18,9 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 8bacf6d4..595b739 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -19,10 +19,10 @@
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/hardware/arm_timer.h>
 #include <mach/cm.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index 7c49d55..44d4c2e 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -17,9 +17,9 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
 
@@ -184,7 +184,6 @@ static int integrator_cpufreq_init(struct cpufreq_policy *policy)
 {
 
 	/* set default policy and cpuinfo */
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 	policy->cpuinfo.max_freq = 160000;
 	policy->cpuinfo.min_freq = 12000;
 	policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 3c8383d..172299a 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -20,8 +20,8 @@
 #include <linux/mm.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/hardware/icst525.h>
 #include <mach/lm.h>
 #include <mach/impd1.h>
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 6e472b5..8138a7e 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -27,9 +27,9 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 6b99e9c..88026cc 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -19,9 +19,9 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -217,8 +217,7 @@ sic_handle_irq(unsigned int irq, struct irq_desc *desc)
 
 		irq += IRQ_SIC_START;
 
-		desc = irq_desc + irq;
-		desc_handle_irq(irq, desc);
+		generic_handle_irq(irq);
 	} while (status);
 }
 
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 7bc6881..8dcc823 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -24,9 +24,9 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 9f2b1ea..f1d72b2 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -27,9 +27,9 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index e8b59d8..b82602d 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -7,9 +7,6 @@
  * Physical DRAM offset.
  */
 #define PHYS_OFFSET	UL(0x00000000)
-#define TASK_SIZE  	UL(0x3f000000)
-#define PAGE_OFFSET	UL(0x40000000)
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
 
 #ifndef __ASSEMBLY__
 
@@ -29,32 +26,52 @@
 
 /* RAM has 1:1 mapping on the PCIe/x Busses */
 #define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)    (__phys_to_virt(x))
+#define __bus_to_virt(x)	(__phys_to_virt(x))
 
-#define virt_to_lbus(x) 					   \
-(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) &&		   \
-((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? 			   \
-((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
-((x) - PAGE_OFFSET + PHYS_OFFSET))
+static inline dma_addr_t __virt_to_lbus(unsigned long x)
+{
+	return x + IOP13XX_PMMR_PHYS_MEM_BASE - IOP13XX_PMMR_VIRT_MEM_BASE;
+}
 
-#define lbus_to_virt(x)                                            \
-(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
-((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
-((x) - PHYS_OFFSET + PAGE_OFFSET))
+static inline unsigned long __lbus_to_virt(dma_addr_t x)
+{
+	return x + IOP13XX_PMMR_VIRT_MEM_BASE - IOP13XX_PMMR_PHYS_MEM_BASE;
+}
+
+#define __is_lbus_dma(a)				\
+	((a) >= IOP13XX_PMMR_P_START && (a) < IOP13XX_PMMR_P_END)
+
+#define __is_lbus_virt(a)				\
+	((a) >= IOP13XX_PMMR_V_START && (a) < IOP13XX_PMMR_V_END)
 
 /* Device is an lbus device if it is on the platform bus of the IOP13XX */
-#define is_lbus_device(dev) (dev &&\
-			     (strncmp(dev->bus->name, "platform", 8) == 0))
+#define is_lbus_device(dev) 				\
+	(dev && strncmp(dev->bus->name, "platform", 8) == 0)
 
-#define __arch_page_to_dma(dev, page)					\
-({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
-(dma_addr_t)__virt_to_bus(page_address(page));})
+#define __arch_dma_to_virt(dev, addr)					\
+	({								\
+		unsigned long __virt;					\
+		dma_addr_t __dma = addr;				\
+		if (is_lbus_device(dev) && __is_lbus_dma(__dma))	\
+			__virt = __lbus_to_virt(__dma);			\
+		else							\
+			__virt = __bus_to_virt(__dma);			\
+		(void *)__virt;						\
+	})
 
-#define __arch_dma_to_virt(dev, addr) \
-({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
+#define __arch_virt_to_dma(dev, addr)					\
+	({								\
+		unsigned long __virt = (unsigned long)addr;		\
+		dma_addr_t __dma;					\
+		if (is_lbus_device(dev) && __is_lbus_virt(__virt))	\
+			__dma = __virt_to_lbus(__virt);			\
+		else							\
+			__dma = __virt_to_bus(__virt);			\
+		__dma;							\
+	})
 
-#define __arch_virt_to_dma(dev, addr) \
-({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
+#define __arch_page_to_dma(dev, page)					\
+	__arch_virt_to_dma(dev, page_address(page))
 
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 17b5515..59f42b5 100644
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -1,7 +1,7 @@
 #ifndef _IOP13XX_PCI_H_
 #define _IOP13XX_PCI_H_
+#include <linux/io.h>
 #include <mach/irqs.h>
-#include <asm/io.h>
 
 struct pci_sys_data;
 struct hw_pci;
diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
index 49213d9..d6d5252 100644
--- a/arch/arm/mach-iop13xx/include/mach/time.h
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
@@ -41,7 +41,7 @@ static inline unsigned long iop13xx_core_freq(void)
 		return 1200000000;
 	default:
 		printk("%s: warning unknown frequency, defaulting to 800Mhz\n",
-			__FUNCTION__);
+			__func__);
 	}
 
 	return 800000000;
@@ -60,7 +60,7 @@ static inline unsigned long iop13xx_xsi_bus_ratio(void)
 		return 4;
 	default:
 		printk("%s: warning unknown ratio, defaulting to 2\n",
-			__FUNCTION__);
+			__func__);
 	}
 
 	return 2;
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 26cfa31..5295809 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -18,8 +18,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 void * __iomem __iop13xx_io(unsigned long io_addr)
 {
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index 63ef1124c..f34b0ed 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -110,8 +110,7 @@ static void iop13xx_msi_handler(unsigned int irq, struct irq_desc *desc)
 		do {
 			j = find_first_bit(&status, 32);
 			(write_imipr[i])(1 << j); /* write back to clear bit */
-			desc = irq_desc + IRQ_IOP13XX_MSI_0 + j + (32*i);
-			desc_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i),	desc);
+			generic_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i));
 			status = (read_imipr[i])();
 		} while (status);
 	}
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index b17ccc8..cfd4d2e 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -18,13 +18,13 @@
  */
 
 #include <linux/serial_8250.h>
+#include <linux/io.h>
 #ifdef CONFIG_MTD_PHYSMAP
 #include <linux/mtd/physmap.h>
 #endif
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/hardware/iop_adma.h>
 
 #define IOP13XX_UART_XTAL 33334000
diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c
index 2476347..c6af1e1 100644
--- a/arch/arm/mach-iop13xx/tpmi.c
+++ b/arch/arm/mach-iop13xx/tpmi.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 45d6127..a9c2dfd 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -25,8 +25,8 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 082818aa..dd1cd99 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -26,8 +26,9 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
+#include <asm/cputype.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -49,8 +50,7 @@ static int force_ep80219;
 
 static int is_80219(void)
 {
-	extern int processor_id;
-	return !!((processor_id & 0xffffffe0) == 0x69052e20);
+	return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
 }
 
 static int is_ep80219(void)
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index d735539..fbe2779 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -23,8 +23,8 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 3173f9c..d2e4278 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,8 +30,8 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index c7d99f9..d51e10c 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -22,8 +22,8 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index af616c5..92fb44c 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -22,8 +22,8 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
index 8c21870..cdae24e 100644
--- a/arch/arm/mach-iop33x/uart.c
+++ b/arch/arm/mach-iop33x/uart.c
@@ -17,7 +17,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index a6a4f93..babb225 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -84,64 +84,57 @@ static struct map_desc ixp2000_io_desc[] __initdata = {
 		.virtual	= IXP2000_CAP_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
 		.length		= IXP2000_CAP_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IXP2000_INTCTL_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
 		.length		= IXP2000_INTCTL_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IXP2000_PCI_CREG_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
 		.length		= IXP2000_PCI_CREG_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IXP2000_PCI_CSR_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
 		.length		= IXP2000_PCI_CSR_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IXP2000_MSF_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
 		.length		= IXP2000_MSF_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IXP2000_SCRATCH_RING_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE),
 		.length		= IXP2000_SCRATCH_RING_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IXP2000_SRAM0_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE),
 		.length		= IXP2000_SRAM0_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IXP2000_PCI_IO_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
 		.length		= IXP2000_PCI_IO_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IXP2000_PCI_CFG0_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
 		.length		= IXP2000_PCI_CFG0_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IXP2000_PCI_CFG1_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
 		.length		= IXP2000_PCI_CFG1_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}
 };
 
 void __init ixp2000_map_io(void)
 {
-	/*
-	 * On IXP2400 CPUs we need to use MT_DEVICE_IXP2000 so that
-	 * XCB=101 (to avoid triggering erratum #66), and given that
-	 * this mode speeds up I/O accesses and we have write buffer
-	 * flushes in the right places anyway, it doesn't hurt to use
-	 * XCB=101 for all IXP2000s.
-	 */
 	iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
 
 	/* Set slowport to 8-bit mode.  */
@@ -311,8 +304,7 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc)
 		   
 	for (i = 0; i <= 7; i++) {
 		if (status & (1<<i)) {
-			desc = irq_desc + i + IRQ_IXP2000_GPIO0;
-			desc_handle_irq(i + IRQ_IXP2000_GPIO0, desc);
+			generic_handle_irq(i + IRQ_IXP2000_GPIO0);
 		}
 	}
 }
@@ -404,8 +396,7 @@ static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	for(i = 31; i >= 0; i--) {
 		if(status & (1 << i)) {
-			desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i;
-			desc_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc);
+			generic_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i);
 		}
 	}
 }
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index c62ed65..c84dfac 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -32,8 +32,8 @@
 #include <linux/tty.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -70,17 +70,17 @@ static struct map_desc enp2611_io_desc[] __initdata = {
 		.virtual	= ENP2611_CALEB_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
 		.length		= ENP2611_CALEB_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= ENP2611_PM3386_0_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
 		.length		= ENP2611_PM3386_0_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= ENP2611_PM3386_1_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
 		.length		= ENP2611_PM3386_1_SIZE,
-		.type		= MT_DEVICE_IXP2000,
+		.type		= MT_DEVICE,
 	}
 };
 
diff --git a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
index 19d8037..822f63f 100644
--- a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
+++ b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
@@ -41,13 +41,7 @@
  * Most of the registers are clumped in 4K regions spread throughout
  * the 0xc0000000 -> 0xc0100000 address range, but we just map in
  * the whole range using a single 1 MB section instead of small
- * 4K pages.  This has two advantages for us:
- *
- * 1) We use only one TLB entry for large number of on-chip I/O devices.
- *
- * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
- *    as required per erratum #66.  We accomplish this by using a
- *    new MT_IXP2000_DEVICE memory type with the bits set as required.
+ * 4K pages.
  *
  * CAP stands for CSR Access Proxy.
  *
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index c673b9e..4467c42 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -25,8 +25,8 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 6715b50..94f68ba 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -25,8 +25,8 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 5a781fd..3045130 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -25,8 +25,8 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -129,10 +129,8 @@ static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	for(i = 0; i < board_irq_count; i++) {
 		if(ex_interrupt & (1 << i))  {
-			struct irq_desc *cpld_desc;
 			int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
-			cpld_desc = irq_desc + cpld_irq;
-			desc_handle_irq(cpld_irq, cpld_desc);
+			generic_handle_irq(cpld_irq);
 		}
 	}
 
@@ -145,7 +143,7 @@ static struct irq_chip ixdp2x00_cpld_irq_chip = {
 	.unmask	= ixdp2x00_irq_unmask
 };
 
-void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_irqs)
+void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_of_irqs)
 {
 	unsigned int irq;
 
@@ -156,7 +154,7 @@ void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigne
 
 	board_irq_stat = stat_reg;
 	board_irq_mask = mask_reg;
-	board_irq_count = nr_irqs;
+	board_irq_count = nr_of_irqs;
 
 	*board_irq_mask = 0xffffffff;
 
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 78a2341..4a12327a0 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -30,8 +30,8 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -79,10 +79,8 @@ static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
 		if (ex_interrupt & (1 << i)) {
-			struct irq_desc *cpld_desc;
 			int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
-			cpld_desc = irq_desc + cpld_irq;
-			desc_handle_irq(cpld_irq, cpld_desc);
+			generic_handle_irq(cpld_irq);
 		}
 	}
 
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 03d916f..60e9fd0 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -24,8 +24,8 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 68b4ac5..aa4c442 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -253,7 +253,6 @@ static void pci_handler(unsigned int irq, struct irq_desc *desc)
 {
 	u32 pci_interrupt;
 	unsigned int irqno;
-	struct irq_desc *int_desc;
 
 	pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
 
@@ -268,8 +267,7 @@ static void pci_handler(unsigned int irq, struct irq_desc *desc)
 		BUG();
 	}
 
-	int_desc = irq_desc + irqno;
-	desc_handle_irq(irqno, int_desc);
+	generic_handle_irq(irqno);
 
 	desc->chip->unmask(irq);
 }
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index b6e0bfa..f1b124a 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -68,11 +68,9 @@ static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc)
 
 	for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
 		if (ex_interrupt & (1 << i)) {
-			struct irq_desc *cpld_desc;
 			int cpld_irq =
 				IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
-			cpld_desc = irq_desc + cpld_irq;
-			desc_handle_irq(cpld_irq, cpld_desc);
+			generic_handle_irq(cpld_irq);
 		}
 	}
 
@@ -105,11 +103,9 @@ static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc)
 
 	for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
 		if (ex_interrupt & (1 << i)) {
-			struct irq_desc *cpld_desc;
 			int cpld_irq =
 				IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
-			cpld_desc = irq_desc + cpld_irq;
-			desc_handle_irq(cpld_irq, cpld_desc);
+			generic_handle_irq(cpld_irq);
 		}
 	}
 
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 701d60a..59022be 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -25,8 +25,8 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index db8b5fe..2c5a02b 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -167,11 +167,6 @@ config MACH_GTWX5715
 
 comment "IXP4xx Options"
 
-config DMABOUNCE
-	bool
-	default y
-	depends on PCI
-
 config IXP4XX_INDIRECT_PCI
 	bool "Use indirect PCI memory access"
 	depends on PCI
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 192538a..d816c51 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -25,9 +25,10 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/io.h>
 #include <asm/dma-mapping.h>
 
-#include <asm/io.h>
+#include <asm/cputype.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/system.h>
@@ -366,15 +367,13 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
 
 void __init ixp4xx_pci_preinit(void)
 {  
-	unsigned long processor_id;
-
-	asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :);
+	unsigned long cpuid = read_cpuid_id();
 
 	/*
 	 * Determine which PCI read method to use.
 	 * Rev 0 IXP425 requires workaround.
 	 */
-	if (!(processor_id & 0xf) && cpu_is_ixp42x()) {
+	if (!(cpuid & 0xf) && cpu_is_ixp42x()) {
 		printk("PCI: IXP42x A0 silicon detected - "
 			"PCI Non-Prefetch Workaround Enabled\n");
 		ixp4xx_pci_read = ixp4xx_pci_read_errata;
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 58bd284..7766f46 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -28,11 +28,11 @@
 #include <linux/timex.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/io.h>
 
 #include <mach/udc.h>
 #include <mach/hardware.h>
 #include <asm/uaccess.h>
-#include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 501dfdc..e7c6386 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -23,11 +23,11 @@
 #include <linux/reboot.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <asm/io.h>
 #include <asm/gpio.h>
 
 static struct flash_platform_data fsg_flash_data = {
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index ff8aa23..51bd69c 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -14,18 +14,19 @@
 #ifndef __ASM_ARCH_CPU_H__
 #define __ASM_ARCH_CPU_H__
 
-extern unsigned int processor_id;
+#include <asm/cputype.h>
+
 /* Processor id value in CP15 Register 0 */
 #define IXP425_PROCESSOR_ID_VALUE	0x690541c0
 #define IXP435_PROCESSOR_ID_VALUE	0x69054040
 #define IXP465_PROCESSOR_ID_VALUE	0x69054200
 #define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
 
-#define cpu_is_ixp42x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+#define cpu_is_ixp42x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
 			  IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+#define cpu_is_ixp43x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
 			  IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+#define cpu_is_ixp46x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
 			  IXP465_PROCESSOR_ID_VALUE)
 
 static inline u32 ixp4xx_read_feature_bits(void)
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 9b2d2ec..f4a0c1b 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -20,6 +20,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/delay.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -29,7 +30,6 @@
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <asm/delay.h>
 
 static struct flash_platform_data ixdp425_flash_data = {
 	.map_name	= "cfi_probe",
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 84b5e62..0acd95e 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -28,11 +28,11 @@
 #include <linux/reboot.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <asm/io.h>
 #include <asm/gpio.h>
 
 static struct flash_platform_data nas100d_flash_data = {
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index a48a665..bc9d920 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -25,12 +25,12 @@
 #include <linux/reboot.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
-#include <asm/io.h>
 #include <asm/gpio.h>
 
 static struct flash_platform_data nslu2_flash_data = {
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index e14bf40..b96c55d 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -2,4 +2,4 @@ obj-y				+= common.o addr-map.o irq.o pcie.o
 
 obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
-obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6281-setup.o
+obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index c79f492..5db4f0b 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -48,6 +48,7 @@
 
 
 struct mbus_dram_target_info kirkwood_mbus_dram_info;
+static int __initdata win_alloc_count;
 
 static int __init cpu_win_can_remap(int win)
 {
@@ -111,6 +112,8 @@ void __init kirkwood_setup_cpu_mbus(void)
 	setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
 		      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
 
+	win_alloc_count = 3;
+
 	/*
 	 * Setup MBUS dram target info.
 	 */
@@ -137,3 +140,8 @@ void __init kirkwood_setup_cpu_mbus(void)
 	}
 	kirkwood_mbus_dram_info.num_cs = cs;
 }
+
+void __init kirkwood_setup_sram_win(u32 base, u32 size)
+{
+	setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1);
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 189f16f..0bb1fbd 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -16,6 +16,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/timex.h>
 #include <asm/mach/map.h>
@@ -98,7 +99,6 @@ void __init kirkwood_ehci_init(void)
  * GE00
  ****************************************************************************/
 struct mv643xx_eth_shared_platform_data kirkwood_ge00_shared_data = {
-	.t_clk		= KIRKWOOD_TCLK,
 	.dram		= &kirkwood_mbus_dram_info,
 };
 
@@ -108,6 +108,11 @@ static struct resource kirkwood_ge00_shared_resources[] = {
 		.start	= GE00_PHYS_BASE + 0x2000,
 		.end	= GE00_PHYS_BASE + 0x3fff,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "ge00 err irq",
+		.start	= IRQ_KIRKWOOD_GE00_ERR,
+		.end	= IRQ_KIRKWOOD_GE00_ERR,
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -117,7 +122,7 @@ static struct platform_device kirkwood_ge00_shared = {
 	.dev		= {
 		.platform_data	= &kirkwood_ge00_shared_data,
 	},
-	.num_resources	= 1,
+	.num_resources	= ARRAY_SIZE(kirkwood_ge00_shared_resources),
 	.resource	= kirkwood_ge00_shared_resources,
 };
 
@@ -148,6 +153,40 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 
 
 /*****************************************************************************
+ * Ethernet switch
+ ****************************************************************************/
+static struct resource kirkwood_switch_resources[] = {
+	{
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_switch_device = {
+	.name		= "dsa",
+	.id		= 0,
+	.num_resources	= 0,
+	.resource	= kirkwood_switch_resources,
+};
+
+void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
+{
+	if (irq != NO_IRQ) {
+		kirkwood_switch_resources[0].start = irq;
+		kirkwood_switch_resources[0].end = irq;
+		kirkwood_switch_device.num_resources = 1;
+	}
+
+	d->mii_bus = &kirkwood_ge00_shared.dev;
+	d->netdev = &kirkwood_ge00.dev;
+	kirkwood_switch_device.dev.platform_data = d;
+
+	platform_device_register(&kirkwood_switch_device);
+}
+
+
+/*****************************************************************************
  * SoC RTC
  ****************************************************************************/
 static struct resource kirkwood_rtc_resource = {
@@ -201,7 +240,6 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
  * SPI
  ****************************************************************************/
 static struct orion_spi_info kirkwood_spi_plat_data = {
-	.tclk		= KIRKWOOD_TCLK,
 };
 
 static struct resource kirkwood_spi_resources[] = {
@@ -239,7 +277,7 @@ static struct plat_serial8250_port kirkwood_uart0_data[] = {
 		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= KIRKWOOD_TCLK,
+		.uartclk	= 0,
 	}, {
 	},
 };
@@ -283,7 +321,7 @@ static struct plat_serial8250_port kirkwood_uart1_data[] = {
 		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= KIRKWOOD_TCLK,
+		.uartclk	= 0,
 	}, {
 	},
 };
@@ -525,9 +563,23 @@ void __init kirkwood_xor1_init(void)
 /*****************************************************************************
  * Time handling
  ****************************************************************************/
+int kirkwood_tclk;
+
+int __init kirkwood_find_tclk(void)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+	if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0)
+		return 200000000;
+
+	return 166666667;
+}
+
 static void kirkwood_timer_init(void)
 {
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, KIRKWOOD_TCLK);
+	kirkwood_tclk = kirkwood_find_tclk();
+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
 }
 
 struct sys_timer kirkwood_timer = {
@@ -538,33 +590,62 @@ struct sys_timer kirkwood_timer = {
 /*****************************************************************************
  * General
  ****************************************************************************/
+/*
+ * Identify device ID and revision.
+ */
 static char * __init kirkwood_id(void)
 {
-	switch (readl(DEVICE_ID) & 0x3) {
-	case 0:
-		return "88F6180";
-	case 1:
-		return "88F6192";
-	case 2:
-		return "88F6281";
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+
+	if (dev == MV88F6281_DEV_ID) {
+		if (rev == MV88F6281_REV_Z0)
+			return "MV88F6281-Z0";
+		else if (rev == MV88F6281_REV_A0)
+			return "MV88F6281-A0";
+		else
+			return "MV88F6281-Rev-Unsupported";
+	} else if (dev == MV88F6192_DEV_ID) {
+		if (rev == MV88F6192_REV_Z0)
+			return "MV88F6192-Z0";
+		else if (rev == MV88F6192_REV_A0)
+			return "MV88F6192-A0";
+		else
+			return "MV88F6192-Rev-Unsupported";
+	} else if (dev == MV88F6180_DEV_ID) {
+		if (rev == MV88F6180_REV_A0)
+			return "MV88F6180-Rev-A0";
+		else
+			return "MV88F6180-Rev-Unsupported";
+	} else {
+		return "Device-Unknown";
 	}
-
-	return "unknown 88F6000 variant";
 }
 
-static int __init is_l2_writethrough(void)
+static void __init kirkwood_l2_init(void)
 {
-	return !!(readl(L2_CONFIG_REG) & L2_WRITETHROUGH);
+#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
+	writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
+	feroceon_l2_init(1);
+#else
+	writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
+	feroceon_l2_init(0);
+#endif
 }
 
 void __init kirkwood_init(void)
 {
 	printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
-		kirkwood_id(), KIRKWOOD_TCLK);
+		kirkwood_id(), kirkwood_tclk);
+	kirkwood_ge00_shared_data.t_clk = kirkwood_tclk;
+	kirkwood_spi_plat_data.tclk = kirkwood_tclk;
+	kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
+	kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
 
 	kirkwood_setup_cpu_mbus();
 
 #ifdef CONFIG_CACHE_FEROCEON_L2
-	feroceon_l2_init(is_l2_writethrough());
+	kirkwood_l2_init();
 #endif
 }
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 69cd113..5774632 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -11,6 +11,7 @@
 #ifndef __ARCH_KIRKWOOD_COMMON_H
 #define __ARCH_KIRKWOOD_COMMON_H
 
+struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
@@ -23,13 +24,13 @@ void kirkwood_init_irq(void);
 
 extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
 void kirkwood_setup_cpu_mbus(void);
-void kirkwood_setup_pcie_io_win(int window, u32 base, u32 size,
-				int maj, int min);
-void kirkwood_setup_pcie_mem_win(int window, u32 base, u32 size,
-				 int maj, int min);
+void kirkwood_setup_sram_win(u32 base, u32 size);
+
+void kirkwood_pcie_id(u32 *dev, u32 *rev);
 
 void kirkwood_ehci_init(void);
 void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
 void kirkwood_pcie_init(void);
 void kirkwood_rtc_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 610fb24..a14c294 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -25,7 +25,7 @@
 #include "common.h"
 
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
-	.phy_addr	= 8,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
 static struct mv_sata_platform_data db88f6281_sata_data = {
@@ -44,7 +44,6 @@ static void __init db88f6281_init(void)
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&db88f6281_sata_data);
 	kirkwood_uart0_init();
-	kirkwood_uart1_init();
 }
 
 static int __init db88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
index 6fd0583..ffab89f 100644
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -50,6 +50,7 @@
 #define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
 #define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
 #define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
+#define IRQ_KIRKWOOD_GE00_ERR	46
 
 /*
  * KIRKWOOD General Purpose Pins
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 5c69992..eae4240 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -68,6 +68,20 @@
 #define   L2_WRITETHROUGH	0x00000010
 
 /*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID	0x6281
+#define MV88F6281_REV_Z0	0
+#define MV88F6281_REV_A0	2
+
+#define MV88F6192_DEV_ID	0x6192
+#define MV88F6192_REV_Z0	0
+#define MV88F6192_REV_A0	2
+
+#define MV88F6180_DEV_ID	0x6180
+#define MV88F6180_REV_A0	2
+
+/*
  * Register Map
  */
 #define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
index f77ef4a..c923cd1 100644
--- a/arch/arm/mach-kirkwood/include/mach/timex.h
+++ b/arch/arm/mach-kirkwood/include/mach/timex.h
@@ -8,4 +8,3 @@
 
 #define CLOCK_TICK_RATE		(100 * HZ)
 
-#define KIRKWOOD_TCLK		166666667
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 2195fa3..f6b08f2 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -18,6 +18,12 @@
 
 #define PCIE_BASE	((void __iomem *)PCIE_VIRT_BASE)
 
+void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
+{
+	*dev = orion_pcie_dev_id(PCIE_BASE);
+	*rev = orion_pcie_rev(PCIE_BASE);
+}
+
 static int pcie_valid_config(int bus, int dev)
 {
 	/*
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index a3012d4..b1d1a87a 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -30,7 +30,7 @@
 #define RD88F6192_GPIO_USB_VBUS		10
 
 static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
-	.phy_addr	= 8,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
 static struct mv_sata_platform_data rd88f6192_sata_data = {
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index d96487a0..175054a 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -19,6 +19,7 @@
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
@@ -69,11 +70,20 @@ static struct platform_device rd88f6281_nand_flash = {
 };
 
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
-	.phy_addr	= -1,
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
 	.speed		= SPEED_1000,
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_platform_data rd88f6281_switch_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
 static struct mv_sata_platform_data rd88f6281_sata_data = {
 	.n_ports	= 2,
 };
@@ -87,10 +97,10 @@ static void __init rd88f6281_init(void)
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
+	kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_uart0_init();
-	kirkwood_uart1_init();
 
 	platform_device_register(&rd88f6281_nand_flash);
 }
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index c6c08e8..7f3f240 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -24,9 +24,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index 3624e65..9aecf0c 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -23,8 +23,8 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
@@ -72,7 +72,7 @@ int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
 
 	/* set pin as input */
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-	x &= ~IOPM_(pin);
+	x &= ~IOPM(pin);
 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
 
 	local_irq_restore(flags);
@@ -108,7 +108,7 @@ int __init_or_module gpio_direction_input(unsigned int pin)
 
 	/* set pin as input */
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-	x &= ~IOPM_(pin);
+	x &= ~IOPM(pin);
 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
 
 	local_irq_restore(flags);
@@ -136,14 +136,14 @@ int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state)
 	/* set line state */
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
 	if (state)
-		x |= (1 << pin);
+		x |= IOPD(pin);
 	else
-		x &= ~(1 << pin);
+		x &= ~IOPD(pin);
 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
 
 	/* set pin as output */
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-	x |= IOPM_(pin);
+	x |= IOPM(pin);
 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
 
 	local_irq_restore(flags);
@@ -168,9 +168,9 @@ void gpio_set_value(unsigned int pin, unsigned int state)
 	/* set output line state */
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
 	if (state)
-		x |= (1 << pin);
+		x |= IOPD(pin);
 	else
-		x &= ~(1 << pin);
+		x &= ~IOPD(pin);
 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
 
 	local_irq_restore(flags);
@@ -189,7 +189,7 @@ int gpio_get_value(unsigned int pin)
 		return -EINVAL;
 
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
-	return (x & (1 << pin)) != 0;
+	return (x & IOPD(pin)) != 0;
 }
 EXPORT_SYMBOL(gpio_get_value);
 
@@ -240,7 +240,7 @@ static int ks8695_gpio_show(struct seq_file *s, void *unused)
 	for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
 		seq_printf(s, "%i:\t", i);
 
-		seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input");
+		seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
 
 		if (i <= KS8695_GPIO_3) {
 			if (ctrl & enable[i]) {
@@ -273,7 +273,7 @@ static int ks8695_gpio_show(struct seq_file *s, void *unused)
 
 		seq_printf(s, "\t");
 
-		seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0);
+		seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
 	}
 	return 0;
 }
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index dadbe66..8fbc4c7 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -31,8 +31,8 @@
 /* Platform-bus mapping */
 extern struct bus_type platform_bus_type;
 #define is_lbus_device(dev)		(dev && dev->bus == &platform_bus_type)
-#define __arch_dma_to_virt(dev, x)	({ is_lbus_device(dev) ? \
-					__phys_to_virt(x) : __bus_to_virt(x); })
+#define __arch_dma_to_virt(dev, x)	({ (void *) (is_lbus_device(dev) ? \
+					__phys_to_virt(x) : __bus_to_virt(x)); })
 #define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
 					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
 #define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
index 0df6fe6..90614a7 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -24,7 +24,7 @@
 
 
 /* Port Mode Register */
-#define IOPM_(x)		(1 << (x))	/* Mode for GPIO Pin x */
+#define IOPM(x)			(1 << (x))	/* Mode for GPIO Pin x */
 
 /* Port Control Register */
 #define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
@@ -50,6 +50,6 @@
 #define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
 
 /* Port Data Register */
-#define IOPD_(x)		(1 << (x))	/* Signal Level of GPIO Pin x */
+#define IOPD(x)			(1 << (x))	/* Signal Level of GPIO Pin x */
 
 #endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
index 9ef4099..82c5f37 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-lan.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -29,8 +29,8 @@
 #define KS8695_LRDLB		(0x14)		/* Receive Descriptor List Base Address */
 #define KS8695_LMAL		(0x18)		/* MAC Station Address Low */
 #define KS8695_LMAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_LMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
-#define KS8695_LMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+#define KS8695_LMAAL(n)		(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH(n)		(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
 
 
 /* DMA Transmit Control Register */
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
index eb494ec6..c475bed 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-wan.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -29,8 +29,8 @@
 #define KS8695_WRDLB		(0x14)		/* Receive Descriptor List Base Address */
 #define KS8695_WMAL		(0x18)		/* MAC Station Address Low */
 #define KS8695_WMAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_WMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
-#define KS8695_WMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+#define KS8695_WMAAL(n)		(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH(n)		(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
 
 
 /* DMA Transmit Control Register */
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
index 2a6f918..5a9b032 100644
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -14,7 +14,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/regs-timer.h>
 
 static void arch_idle(void)
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
index 0eee37a..9495cb4 100644
--- a/arch/arm/mach-ks8695/include/mach/uncompress.h
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -14,7 +14,7 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/regs-uart.h>
 
 static void putc(char c)
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index e5e71f4..e375c1d 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -24,10 +24,10 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index 1746c67..f5ebcc0 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -27,8 +27,8 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
 #include <mach/hardware.h>
@@ -141,7 +141,7 @@ static struct pci_ops ks8695_pci_ops = {
 	.write	= ks8695_pci_writeconfig,
 };
 
-static struct pci_bus *ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
+static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
 }
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 940888d..69c072c 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -24,8 +24,8 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/mach/time.h>
 
 #include <mach/regs-timer.h>
diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig
index 6f4c6a1..9be7466 100644
--- a/arch/arm/mach-lh7a40x/Kconfig
+++ b/arch/arm/mach-lh7a40x/Kconfig
@@ -40,23 +40,22 @@ config LPD7A40X_CPLD_SSP
 	bool
 
 config LH7A40X_CONTIGMEM
-	bool "Disable NUMA Support"
-	depends on ARCH_LH7A40X
+	bool "Disable NUMA/SparseMEM Support"
 	help
 	  Say Y here if your bootloader sets the SROMLL bit(s) in
 	  the SDRAM controller, organizing memory as a contiguous
-	  array.  This option will disable CONFIG_DISCONTIGMEM and
-          force the kernel to manage all memory in one node.
+	  array.  This option will disable sparse memory support
+          and force the kernel to manage all memory in one node.
 
-	  Setting this option incorrectly may prevent the kernel from
-	  booting.  It is OK to leave it N.
+	  Setting this option incorrectly may prevent the kernel
+	  from booting.  It is OK to leave it N.
 
 	  For more information, consult
 	    <file:Documentation/arm/Sharp-LH/SDRAM>.
 
 config LH7A40X_ONE_BANK_PER_NODE
 	bool "Optimize NUMA Node Tables for Size"
-	depends on ARCH_LH7A40X && !LH7A40X_CONTIGMEM
+	depends on !LH7A40X_CONTIGMEM
 	help
 	  Say Y here to produce compact memory node tables.  By
 	  default pairs of adjacent physical RAM banks are managed
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 551b972..3d7bd50 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -77,7 +77,7 @@ static void kev7a400_cpld_handler (unsigned int irq, struct irq_desc *desc)
 	irq = IRQ_KEV7A400_CPLD;
 	for (; mask; mask >>= 1, ++irq)
 		if (mask & 1)
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 }
 
 void __init lh7a40x_init_board_irq (void)
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index e373fb8..cb15e5d 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -214,11 +214,11 @@ static void lpd7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
 	desc->chip->ack (irq);
 
 	if ((mask & (1<<0)) == 0)	/* WLAN */
-		IRQ_DISPATCH (IRQ_LPD7A40X_ETH_INT);
+		generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
 
 #if defined (IRQ_TOUCH)
 	if ((mask & (1<<1)) == 0)	/* Touch */
-		IRQ_DISPATCH (IRQ_TOUCH);
+		generic_handle_irq(IRQ_TOUCH);
 #endif
 
 	desc->chip->unmask (irq); /* Level-triggered need this */
diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h
index 0ca20c6..6ed3f6b 100644
--- a/arch/arm/mach-lh7a40x/common.h
+++ b/arch/arm/mach-lh7a40x/common.h
@@ -15,4 +15,3 @@ extern void lh7a404_init_irq (void);
 extern void lh7a40x_clcd_init (void);
 extern void lh7a40x_init_board_irq (void);
 
-#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq))
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
index f7107b4..1da14ff 100644
--- a/arch/arm/mach-lh7a40x/include/mach/memory.h
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -73,4 +73,10 @@
 
 #endif
 
+/*
+ * Sparsemem version of the above
+ */
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	24
+
 #endif
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 0d5063eb..fd033bb 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -63,10 +63,10 @@ static void lh7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
 	desc->chip->ack (irq);
 
 	if ((mask & 0x1) == 0)	/* WLAN */
-		IRQ_DISPATCH (IRQ_LPD7A40X_ETH_INT);
+		generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
 
 	if ((mask & 0x2) == 0)	/* Touch */
-		IRQ_DISPATCH (IRQ_LPD7A400_TS);
+		generic_handle_irq(IRQ_LPD7A400_TS);
 
 	desc->chip->unmask (irq); /* Level-triggered need this */
 }
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
index 51fbef9..2901d49 100644
--- a/arch/arm/mach-lh7a40x/ssp-cpld.c
+++ b/arch/arm/mach-lh7a40x/ssp-cpld.c
@@ -43,8 +43,8 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index 7fe9e06..4601e425 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -13,9 +13,9 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/time.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
index 70ca56b..0332d8f 100644
--- a/arch/arm/mach-loki/addr-map.c
+++ b/arch/arm/mach-loki/addr-map.c
@@ -11,8 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
index 5a48793..e1f9733 100644
--- a/arch/arm/mach-loki/irq.c
+++ b/arch/arm/mach-loki/irq.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <plat/irq.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index 2cc9ac9..85f9c12 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -67,7 +67,7 @@ static struct platform_device lb88rc8480_boot_flash = {
 };
 
 static struct mv643xx_eth_platform_data lb88rc8480_ge0_data = {
-	.phy_addr	= 1,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
 	.mac_addr	= { 0x00, 0x50, 0x43, 0x11, 0x22, 0x33 },
 };
 
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 3553bab..d140abc 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,18 +1,13 @@
-if ARCH_MSM7X00A
+if ARCH_MSM
 
-comment "MSM7X00A Board Type"
-	depends on ARCH_MSM7X00A
+comment "MSM Board Type"
+	depends on ARCH_MSM
 
 config MACH_HALIBUT
-	depends on ARCH_MSM7X00A
+	depends on ARCH_MSM
 	default y
-	bool "Halibut Board (QCT SURF7200A)"
+	bool "Halibut Board (QCT SURF7201A)"
 	help
-	  Support for the Qualcomm SURF7200A eval board.
-
-config MSM7X00A_IDLE
-	depends on ARCH_MSM7X00A
-	default y
-	bool "Idle Support for MSM7X00A"
+	  Support for the Qualcomm SURF7201A eval board.
 
 endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index d12f236..1aa4700 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,7 +1,8 @@
 obj-y += io.o idle.o irq.o timer.o dma.o
-
-# Common code for board init
-obj-y += common.o
+obj-y += devices.o
+obj-y += proc_comm.o
+obj-y += vreg.o
+obj-y += clock.o clock-7x01a.o
 
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
 
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 995afc4a..c2a96e3 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -18,6 +18,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -28,12 +30,11 @@
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 
-#include <asm/io.h>
-#include <asm/delay.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
+#include "devices.h"
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= 0x9C004300,
@@ -54,31 +55,12 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-static void mddi0_panel_power(int on)
-{
-}
-
-static struct msm_mddi_platform_data msm_mddi0_pdata = {
-	.panel_power	= mddi0_panel_power,
-	.has_vsync_irq	= 0,
-};
-
-static struct platform_device msm_mddi0_device = {
-	.name	= "msm_mddi",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &msm_mddi0_pdata
-	},
-};
-
-static struct platform_device msm_serial0_device = {
-	.name	= "msm_serial",
-	.id	= 0,
-};
-
 static struct platform_device *devices[] __initdata = {
-	&msm_serial0_device,
-	&msm_mddi0_device,
+	&msm_device_uart3,
+	&msm_device_smd,
+	&msm_device_nand,
+	&msm_device_hsusb,
+	&msm_device_i2c,
 	&smc91x_device,
 };
 
@@ -92,20 +74,15 @@ static void __init halibut_init_irq(void)
 static void __init halibut_init(void)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-	msm_add_devices();
 }
 
 static void __init halibut_map_io(void)
 {
 	msm_map_common_io();
+	msm_clock_init();
 }
 
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
-
-/* UART for LL DEBUG */
-	.phys_io	= MSM_UART1_PHYS,
-	.io_pg_offst	= ((MSM_UART1_BASE) >> 18) & 0xfffc,
-
 	.boot_params	= 0x10000100,
 	.map_io		= halibut_map_io,
 	.init_irq	= halibut_init_irq,
diff --git a/arch/arm/mach-msm/clock-7x01a.c b/arch/arm/mach-msm/clock-7x01a.c
new file mode 100644
index 0000000..62230a3
--- /dev/null
+++ b/arch/arm/mach-msm/clock-7x01a.c
@@ -0,0 +1,126 @@
+/* arch/arm/mach-msm/clock-7x01a.c
+ *
+ * Clock tables for MSM7X01A
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include "clock.h"
+#include "devices.h"
+
+/* clock IDs used by the modem processor */
+
+#define ACPU_CLK	0   /* Applications processor clock */
+#define ADM_CLK		1   /* Applications data mover clock */
+#define ADSP_CLK	2   /* ADSP clock */
+#define EBI1_CLK	3   /* External bus interface 1 clock */
+#define EBI2_CLK	4   /* External bus interface 2 clock */
+#define ECODEC_CLK	5   /* External CODEC clock */
+#define EMDH_CLK	6   /* External MDDI host clock */
+#define GP_CLK		7   /* General purpose clock */
+#define GRP_CLK		8   /* Graphics clock */
+#define I2C_CLK		9   /* I2C clock */
+#define ICODEC_RX_CLK	10  /* Internal CODEX RX clock */
+#define ICODEC_TX_CLK	11  /* Internal CODEX TX clock */
+#define IMEM_CLK	12  /* Internal graphics memory clock */
+#define MDC_CLK		13  /* MDDI client clock */
+#define MDP_CLK		14  /* Mobile display processor clock */
+#define PBUS_CLK	15  /* Peripheral bus clock */
+#define PCM_CLK		16  /* PCM clock */
+#define PMDH_CLK	17  /* Primary MDDI host clock */
+#define SDAC_CLK	18  /* Stereo DAC clock */
+#define SDC1_CLK	19  /* Secure Digital Card clocks */
+#define SDC1_PCLK	20
+#define SDC2_CLK	21
+#define SDC2_PCLK	22
+#define SDC3_CLK	23
+#define SDC3_PCLK	24
+#define SDC4_CLK	25
+#define SDC4_PCLK	26
+#define TSIF_CLK	27  /* Transport Stream Interface clocks */
+#define TSIF_REF_CLK	28
+#define TV_DAC_CLK	29  /* TV clocks */
+#define TV_ENC_CLK	30
+#define UART1_CLK	31  /* UART clocks */
+#define UART2_CLK	32
+#define UART3_CLK	33
+#define UART1DM_CLK	34
+#define UART2DM_CLK	35
+#define USB_HS_CLK	36  /* High speed USB core clock */
+#define USB_HS_PCLK	37  /* High speed USB pbus clock */
+#define USB_OTG_CLK	38  /* Full speed USB clock */
+#define VDC_CLK		39  /* Video controller clock */
+#define VFE_CLK		40  /* Camera / Video Front End clock */
+#define VFE_MDC_CLK	41  /* VFE MDDI client clock */
+
+#define NR_CLKS		42
+
+#define CLOCK(clk_name, clk_id, clk_dev, clk_flags) {	\
+	.name = clk_name, \
+	.id = clk_id, \
+	.flags = clk_flags, \
+	.dev = clk_dev, \
+	}
+
+#define OFF CLKFLAG_AUTO_OFF
+#define MINMAX CLKFLAG_USE_MIN_MAX_TO_SET
+
+struct clk msm_clocks[] = {
+	CLOCK("adm_clk",	ADM_CLK,	NULL, 0),
+	CLOCK("adsp_clk",	ADSP_CLK,	NULL, 0),
+	CLOCK("ebi1_clk",	EBI1_CLK,	NULL, 0),
+	CLOCK("ebi2_clk",	EBI2_CLK,	NULL, 0),
+	CLOCK("ecodec_clk",	ECODEC_CLK,	NULL, 0),
+	CLOCK("emdh_clk",	EMDH_CLK,	NULL, OFF),
+	CLOCK("gp_clk",		GP_CLK,		NULL, 0),
+	CLOCK("grp_clk",	GRP_CLK,	NULL, OFF),
+	CLOCK("i2c_clk",	I2C_CLK,	&msm_device_i2c.dev, 0),
+	CLOCK("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
+	CLOCK("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
+	CLOCK("imem_clk",	IMEM_CLK,	NULL, OFF),
+	CLOCK("mdc_clk",	MDC_CLK,	NULL, 0),
+	CLOCK("mdp_clk",	MDP_CLK,	NULL, OFF),
+	CLOCK("pbus_clk",	PBUS_CLK,	NULL, 0),
+	CLOCK("pcm_clk",	PCM_CLK,	NULL, 0),
+	CLOCK("pmdh_clk",	PMDH_CLK,	NULL, OFF | MINMAX),
+	CLOCK("sdac_clk",	SDAC_CLK,	NULL, OFF),
+	CLOCK("sdc_clk",	SDC1_CLK,	&msm_device_sdc1.dev, OFF),
+	CLOCK("sdc_pclk",	SDC1_PCLK,	&msm_device_sdc1.dev, OFF),
+	CLOCK("sdc_clk",	SDC2_CLK,	&msm_device_sdc2.dev, OFF),
+	CLOCK("sdc_pclk",	SDC2_PCLK,	&msm_device_sdc2.dev, OFF),
+	CLOCK("sdc_clk",	SDC3_CLK,	&msm_device_sdc3.dev, OFF),
+	CLOCK("sdc_pclk",	SDC3_PCLK,	&msm_device_sdc3.dev, OFF),
+	CLOCK("sdc_clk",	SDC4_CLK,	&msm_device_sdc4.dev, OFF),
+	CLOCK("sdc_pclk",	SDC4_PCLK,	&msm_device_sdc4.dev, OFF),
+	CLOCK("tsif_clk",	TSIF_CLK,	NULL, 0),
+	CLOCK("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
+	CLOCK("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
+	CLOCK("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
+	CLOCK("uart_clk",	UART1_CLK,	&msm_device_uart1.dev, OFF),
+	CLOCK("uart_clk",	UART2_CLK,	&msm_device_uart2.dev, 0),
+	CLOCK("uart_clk",	UART3_CLK,	&msm_device_uart3.dev, OFF),
+	CLOCK("uart1dm_clk",	UART1DM_CLK,	NULL, OFF),
+	CLOCK("uart2dm_clk",	UART2DM_CLK,	NULL, 0),
+	CLOCK("usb_hs_clk",	USB_HS_CLK,	&msm_device_hsusb.dev, OFF),
+	CLOCK("usb_hs_pclk",	USB_HS_PCLK,	&msm_device_hsusb.dev, OFF),
+	CLOCK("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
+	CLOCK("vdc_clk",	VDC_CLK,	NULL, OFF | MINMAX),
+	CLOCK("vfe_clk",	VFE_CLK,	NULL, OFF),
+	CLOCK("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
+};
+
+unsigned msm_num_clocks = ARRAY_SIZE(msm_clocks);
diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c
new file mode 100644
index 0000000..3b1ce36
--- /dev/null
+++ b/arch/arm/mach-msm/clock.c
@@ -0,0 +1,218 @@
+/* arch/arm/mach-msm/clock.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+
+#include "clock.h"
+#include "proc_comm.h"
+
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clocks_lock);
+static LIST_HEAD(clocks);
+
+/*
+ * glue for the proc_comm interface
+ */
+static inline int pc_clk_enable(unsigned id)
+{
+	return msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
+}
+
+static inline void pc_clk_disable(unsigned id)
+{
+	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
+}
+
+static inline int pc_clk_set_rate(unsigned id, unsigned rate)
+{
+	return msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
+}
+
+static inline int pc_clk_set_min_rate(unsigned id, unsigned rate)
+{
+	return msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
+}
+
+static inline int pc_clk_set_max_rate(unsigned id, unsigned rate)
+{
+	return msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
+}
+
+static inline int pc_clk_set_flags(unsigned id, unsigned flags)
+{
+	return msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
+}
+
+static inline unsigned pc_clk_get_rate(unsigned id)
+{
+	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
+		return 0;
+	else
+		return id;
+}
+
+static inline unsigned pc_clk_is_enabled(unsigned id)
+{
+	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
+		return 0;
+	else
+		return id;
+}
+
+static inline int pc_pll_request(unsigned id, unsigned on)
+{
+	on = !!on;
+	return msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
+}
+
+/*
+ * Standard clock functions defined in include/linux/clk.h
+ */
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *clk;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(clk, &clocks, list)
+		if (!strcmp(id, clk->name) && clk->dev == dev)
+			goto found_it;
+
+	list_for_each_entry(clk, &clocks, list)
+		if (!strcmp(id, clk->name) && clk->dev == NULL)
+			goto found_it;
+
+	clk = ERR_PTR(-ENOENT);
+found_it:
+	mutex_unlock(&clocks_mutex);
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&clocks_lock, flags);
+	clk->count++;
+	if (clk->count == 1)
+		pc_clk_enable(clk->id);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&clocks_lock, flags);
+	BUG_ON(clk->count == 0);
+	clk->count--;
+	if (clk->count == 0)
+		pc_clk_disable(clk->id);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return pc_clk_get_rate(clk->id);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret;
+	if (clk->flags & CLKFLAG_USE_MIN_MAX_TO_SET) {
+		ret = pc_clk_set_max_rate(clk->id, rate);
+		if (ret)
+			return ret;
+		return pc_clk_set_min_rate(clk->id, rate);
+	}
+	return pc_clk_set_rate(clk->id, rate);
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return -ENOSYS;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return ERR_PTR(-ENOSYS);
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_flags(struct clk *clk, unsigned long flags)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+	return pc_clk_set_flags(clk->id, flags);
+}
+EXPORT_SYMBOL(clk_set_flags);
+
+
+void __init msm_clock_init(void)
+{
+	unsigned n;
+
+	spin_lock_init(&clocks_lock);
+	mutex_lock(&clocks_mutex);
+	for (n = 0; n < msm_num_clocks; n++)
+		list_add_tail(&msm_clocks[n].list, &clocks);
+	mutex_unlock(&clocks_mutex);
+}
+
+/* The bootloader and/or AMSS may have left various clocks enabled.
+ * Disable any clocks that belong to us (CLKFLAG_AUTO_OFF) but have
+ * not been explicitly enabled by a clk_enable() call.
+ */
+static int __init clock_late_init(void)
+{
+	unsigned long flags;
+	struct clk *clk;
+	unsigned count = 0;
+
+	mutex_lock(&clocks_mutex);
+	list_for_each_entry(clk, &clocks, list) {
+		if (clk->flags & CLKFLAG_AUTO_OFF) {
+			spin_lock_irqsave(&clocks_lock, flags);
+			if (!clk->count) {
+				count++;
+				pc_clk_disable(clk->id);
+			}
+			spin_unlock_irqrestore(&clocks_lock, flags);
+		}
+	}
+	mutex_unlock(&clocks_mutex);
+	pr_info("clock_late_init() disabled %d unused clocks\n", count);
+	return 0;
+}
+
+late_initcall(clock_late_init);
diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h
new file mode 100644
index 0000000..f875e15
--- /dev/null
+++ b/arch/arm/mach-msm/clock.h
@@ -0,0 +1,48 @@
+/* arch/arm/mach-msm/clock.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_CLOCK_H
+#define __ARCH_ARM_MACH_MSM_CLOCK_H
+
+#include <linux/list.h>
+
+#define CLKFLAG_INVERT			0x00000001
+#define CLKFLAG_NOINVERT		0x00000002
+#define CLKFLAG_NONEST			0x00000004
+#define CLKFLAG_NORESET			0x00000008
+
+#define CLK_FIRST_AVAILABLE_FLAG	0x00000100
+#define CLKFLAG_USE_MIN_MAX_TO_SET	0x00000200
+#define CLKFLAG_AUTO_OFF		0x00000400
+
+struct clk {
+	uint32_t id;
+	uint32_t count;
+	uint32_t flags;
+	const char *name;
+	struct list_head list;
+	struct device *dev;
+};
+
+#define A11S_CLK_CNTL_ADDR		(MSM_CSR_BASE + 0x100)
+#define A11S_CLK_SEL_ADDR		(MSM_CSR_BASE + 0x104)
+#define A11S_VDD_SVS_PLEVEL_ADDR	(MSM_CSR_BASE + 0x124)
+
+extern struct clk msm_clocks[];
+extern unsigned msm_num_clocks;
+
+#endif
+
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
deleted file mode 100644
index 3a51136..0000000
--- a/arch/arm/mach-msm/common.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* linux/arch/arm/mach-msm/common.c
- *
- * Common setup code for MSM7K Boards
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/flash.h>
-#include <asm/io.h>
-
-#include <asm/setup.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/msm_iomap.h>
-
-#include <mach/board.h>
-
-struct flash_platform_data msm_nand_data = {
-	.parts		= 0,
-	.nr_parts	= 0,
-};
-
-static struct resource msm_nand_resources[] = {
-	[0] = {
-		.start	= 7,
-		.end	= 7,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device msm_nand_device = {
-	.name		= "msm_nand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(msm_nand_resources),
-	.resource	= msm_nand_resources,
-	.dev		= {
-		.platform_data	= &msm_nand_data,
-	},
-};
-
-static struct platform_device msm_smd_device = {
-	.name	= "msm_smd",
-	.id	= -1,
-};
-
-static struct resource msm_i2c_resources[] = {
-	{
-		.start	= MSM_I2C_BASE,
-		.end	= MSM_I2C_BASE + MSM_I2C_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_PWB_I2C,
-		.end	= INT_PWB_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device msm_i2c_device = {
-	.name		= "msm_i2c",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(msm_i2c_resources),
-	.resource	= msm_i2c_resources,
-};
-
-static struct resource usb_resources[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device msm_hsusb_device = {
-	.name		= "msm_hsusb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(usb_resources),
-	.resource	= usb_resources,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_nand_device,
-	&msm_smd_device,
-	&msm_i2c_device,
-	&msm_hsusb_device,
-};
-
-void __init msm_add_devices(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
diff --git a/arch/arm/mach-msm/devices.c b/arch/arm/mach-msm/devices.c
new file mode 100644
index 0000000..f2a74b9
--- /dev/null
+++ b/arch/arm/mach-msm/devices.c
@@ -0,0 +1,267 @@
+/* linux/arch/arm/mach-msm/devices.c
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/msm_iomap.h>
+#include "devices.h"
+
+#include <asm/mach/flash.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+static struct resource resources_uart1[] = {
+	{
+		.start	= INT_UART1,
+		.end	= INT_UART1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART1_PHYS,
+		.end	= MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource resources_uart2[] = {
+	{
+		.start	= INT_UART2,
+		.end	= INT_UART2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART2_PHYS,
+		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource resources_uart3[] = {
+	{
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART3_PHYS,
+		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device msm_device_uart1 = {
+	.name	= "msm_serial",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(resources_uart1),
+	.resource	= resources_uart1,
+};
+
+struct platform_device msm_device_uart2 = {
+	.name	= "msm_serial",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(resources_uart2),
+	.resource	= resources_uart2,
+};
+
+struct platform_device msm_device_uart3 = {
+	.name	= "msm_serial",
+	.id	= 2,
+	.num_resources	= ARRAY_SIZE(resources_uart3),
+	.resource	= resources_uart3,
+};
+
+static struct resource resources_i2c[] = {
+	{
+		.start	= MSM_I2C_PHYS,
+		.end	= MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_PWB_I2C,
+		.end	= INT_PWB_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_i2c = {
+	.name		= "msm_i2c",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(resources_i2c),
+	.resource	= resources_i2c,
+};
+
+static struct resource resources_hsusb[] = {
+	{
+		.start	= MSM_HSUSB_PHYS,
+		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HS,
+		.end	= INT_USB_HS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_hsusb = {
+	.name		= "msm_hsusb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_hsusb),
+	.resource	= resources_hsusb,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct flash_platform_data msm_nand_data = {
+	.parts		= NULL,
+	.nr_parts	= 0,
+};
+
+static struct resource resources_nand[] = {
+	[0] = {
+		.start	= 7,
+		.end	= 7,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device msm_device_nand = {
+	.name		= "msm_nand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_nand),
+	.resource	= resources_nand,
+	.dev		= {
+		.platform_data	= &msm_nand_data,
+	},
+};
+
+struct platform_device msm_device_smd = {
+	.name	= "msm_smd",
+	.id	= -1,
+};
+
+static struct resource resources_sdc1[] = {
+	{
+		.start	= MSM_SDC1_PHYS,
+		.end	= MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC1_0,
+		.end	= INT_SDC1_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc2[] = {
+	{
+		.start	= MSM_SDC2_PHYS,
+		.end	= MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC2_0,
+		.end	= INT_SDC2_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc3[] = {
+	{
+		.start	= MSM_SDC3_PHYS,
+		.end	= MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC3_0,
+		.end	= INT_SDC3_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc4[] = {
+	{
+		.start	= MSM_SDC4_PHYS,
+		.end	= MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC4_0,
+		.end	= INT_SDC4_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device msm_device_sdc1 = {
+	.name		= "msm_sdcc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(resources_sdc1),
+	.resource	= resources_sdc1,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc2 = {
+	.name		= "msm_sdcc",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(resources_sdc2),
+	.resource	= resources_sdc2,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc3 = {
+	.name		= "msm_sdcc",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(resources_sdc3),
+	.resource	= resources_sdc3,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc4 = {
+	.name		= "msm_sdcc",
+	.id		= 4,
+	.num_resources	= ARRAY_SIZE(resources_sdc4),
+	.resource	= resources_sdc4,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h
new file mode 100644
index 0000000..0744c4a
--- /dev/null
+++ b/arch/arm/mach-msm/devices.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/mach-msm/devices.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_DEVICES_H
+#define __ARCH_ARM_MACH_MSM_DEVICES_H
+
+extern struct platform_device msm_device_uart1;
+extern struct platform_device msm_device_uart2;
+extern struct platform_device msm_device_uart3;
+
+extern struct platform_device msm_device_sdc1;
+extern struct platform_device msm_device_sdc2;
+extern struct platform_device msm_device_sdc3;
+extern struct platform_device msm_device_sdc4;
+
+extern struct platform_device msm_device_hsusb;
+
+extern struct platform_device msm_device_i2c;
+
+extern struct platform_device msm_device_smd;
+
+extern struct platform_device msm_device_nand;
+
+#endif
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 9de0826..f5420f9 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -13,7 +13,7 @@
  *
  */
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/interrupt.h>
 #include <mach/dma.h>
 
@@ -26,7 +26,7 @@ enum {
 };
 
 static DEFINE_SPINLOCK(msm_dmov_lock);
-static struct msm_dmov_cmd active_command;
+static unsigned int channel_active;
 static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
 static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
 unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
@@ -43,6 +43,11 @@ unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
 #define PRINT_FLOW(format, args...) \
 	MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args);
 
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful)
+{
+	writel((graceful << 31), DMOV_FLUSH0(id));
+}
+
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 {
 	unsigned long irq_flags;
@@ -60,6 +65,9 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 #endif
 		PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
 		list_add_tail(&cmd->list, &active_commands[id]);
+		if (!channel_active)
+			enable_irq(INT_ADM_AARM);
+		channel_active |= 1U << id;
 		writel(cmd->cmdptr, DMOV_CMD_PTR(id));
 	} else {
 		if (list_empty(&active_commands[id]))
@@ -76,21 +84,19 @@ struct msm_dmov_exec_cmdptr_cmd {
 	struct completion complete;
 	unsigned id;
 	unsigned int result;
-	unsigned int flush[6];
+	struct msm_dmov_errdata err;
 };
 
-static void dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, unsigned int result)
+static void
+dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd,
+			       unsigned int result,
+			       struct msm_dmov_errdata *err)
 {
 	struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd);
 	cmd->result = result;
-	if (result != 0x80000002) {
-		cmd->flush[0] = readl(DMOV_FLUSH0(cmd->id));
-		cmd->flush[1] = readl(DMOV_FLUSH1(cmd->id));
-		cmd->flush[2] = readl(DMOV_FLUSH2(cmd->id));
-		cmd->flush[3] = readl(DMOV_FLUSH3(cmd->id));
-		cmd->flush[4] = readl(DMOV_FLUSH4(cmd->id));
-		cmd->flush[5] = readl(DMOV_FLUSH5(cmd->id));
-	}
+	if (result != 0x80000002 && err)
+		memcpy(&cmd->err, err, sizeof(struct msm_dmov_errdata));
+
 	complete(&cmd->complete);
 }
 
@@ -111,7 +117,7 @@ int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr)
 	if (cmd.result != 0x80000002) {
 		PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result);
 		PRINT_ERROR("dmov_exec_cmdptr(%d):  flush: %x %x %x %x\n",
-			id, cmd.flush[0], cmd.flush[1], cmd.flush[2], cmd.flush[3]);
+			id, cmd.err.flush[0], cmd.err.flush[1], cmd.err.flush[2], cmd.err.flush[3]);
 		return -EIO;
 	}
 	PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr);
@@ -159,25 +165,40 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
 					"for %p, result %x\n", id, cmd, ch_result);
 				if (cmd) {
 					list_del(&cmd->list);
-					cmd->complete_func(cmd, ch_result);
+					cmd->complete_func(cmd, ch_result, NULL);
 				}
 			}
 			if (ch_result & DMOV_RSLT_FLUSH) {
-				unsigned int flush0 = readl(DMOV_FLUSH0(id));
+				struct msm_dmov_errdata errdata;
+
+				errdata.flush[0] = readl(DMOV_FLUSH0(id));
+				errdata.flush[1] = readl(DMOV_FLUSH1(id));
+				errdata.flush[2] = readl(DMOV_FLUSH2(id));
+				errdata.flush[3] = readl(DMOV_FLUSH3(id));
+				errdata.flush[4] = readl(DMOV_FLUSH4(id));
+				errdata.flush[5] = readl(DMOV_FLUSH5(id));
 				PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-				PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, flush0);
+				PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
 				if (cmd) {
 					list_del(&cmd->list);
-					cmd->complete_func(cmd, ch_result);
+					cmd->complete_func(cmd, ch_result, &errdata);
 				}
 			}
 			if (ch_result & DMOV_RSLT_ERROR) {
-				unsigned int flush0 = readl(DMOV_FLUSH0(id));
+				struct msm_dmov_errdata errdata;
+
+				errdata.flush[0] = readl(DMOV_FLUSH0(id));
+				errdata.flush[1] = readl(DMOV_FLUSH1(id));
+				errdata.flush[2] = readl(DMOV_FLUSH2(id));
+				errdata.flush[3] = readl(DMOV_FLUSH3(id));
+				errdata.flush[4] = readl(DMOV_FLUSH4(id));
+				errdata.flush[5] = readl(DMOV_FLUSH5(id));
+
 				PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-				PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, flush0);
+				PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
 				if (cmd) {
 					list_del(&cmd->list);
-					cmd->complete_func(cmd, ch_result);
+					cmd->complete_func(cmd, ch_result, &errdata);
 				}
 				/* this does not seem to work, once we get an error */
 				/* the datamover will no longer accept commands */
@@ -193,8 +214,14 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
 				writel(cmd->cmdptr, DMOV_CMD_PTR(id));
 			}
 		} while (ch_status & DMOV_STATUS_RSLT_VALID);
+		if (list_empty(&active_commands[id]) && list_empty(&ready_commands[id]))
+			channel_active &= ~(1U << id);
 		PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
 	}
+
+	if (!channel_active)
+		disable_irq(INT_ADM_AARM);
+
 	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
 	return IRQ_HANDLED;
 }
@@ -202,12 +229,17 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
 static int __init msm_init_datamover(void)
 {
 	int i;
+	int ret;
 	for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
 		INIT_LIST_HEAD(&ready_commands[i]);
 		INIT_LIST_HEAD(&active_commands[i]);
 		writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
 	}
-	return request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
+	ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
+	if (ret)
+		return ret;
+	disable_irq(INT_ADM_AARM);
+	return 0;
 }
 
 arch_initcall(msm_init_datamover);
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index a763949..264d62e 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -33,5 +33,6 @@ void __init msm_add_devices(void);
 void __init msm_map_common_io(void);
 void __init msm_init_irq(void);
 void __init msm_init_gpio(void);
+void __init msm_clock_init(void);
 
 #endif
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 528eef4..1db3c97 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -22,18 +22,22 @@
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1
 	ldreq	\rx, =MSM_UART1_PHYS
-	ldrne	\rx, =MSM_UART1_BASE
+	movne	\rx, #0
 	.endm
 
 	.macro	senduart,rd,rx
-	str	\rd, [\rx, #0x0C]
+	teq	\rx, #0
+	strne	\rd, [\rx, #0x0C]
 	.endm
 
 	.macro	waituart,rd,rx
 	@ wait for TX_READY
+	teq	\rx, #0
+	bne	2f
 1:	ldr	\rd, [\rx, #0x08]
 	tst	\rd, #0x04
 	beq	1b
+2:
 	.endm
 
 	.macro	busyuart,rd,rx
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
index ad1c87f..5ab5bdf 100644
--- a/arch/arm/mach-msm/include/mach/dma.h
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-msm/include/mach/dma.h
+/* linux/include/asm-arm/arch-msm/dma.h
  *
  * Copyright (C) 2007 Google, Inc.
  *
@@ -18,17 +18,21 @@
 #include <linux/list.h>
 #include <mach/msm_iomap.h>
 
+struct msm_dmov_errdata {
+	uint32_t flush[6];
+};
+
 struct msm_dmov_cmd {
 	struct list_head list;
 	unsigned int cmdptr;
-	void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
-/*	void (*user_result_func)(struct msm_dmov_cmd *cmd); */
+	void (*complete_func)(struct msm_dmov_cmd *cmd,
+			      unsigned int result,
+			      struct msm_dmov_errdata *err);
 };
 
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful);
 int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
 
 
 
@@ -122,6 +126,16 @@ typedef struct {
 	unsigned _reserved;
 } dmov_sg;
 
+/* Box mode */
+typedef struct {
+	uint32_t cmd;
+	uint32_t src_row_addr;
+	uint32_t dst_row_addr;
+	uint32_t src_dst_len;
+	uint32_t num_rows;
+	uint32_t row_offset;
+} dmov_box;
+
 /* bits for the cmd field of the above structures */
 
 #define CMD_LC      (1 << 31)  /* last command */
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index e221f58..2f7b4c8 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -37,11 +37,17 @@
  *
  */
 
-#define MSM_VIC_BASE          0xE0000000
+#ifdef __ASSEMBLY__
+#define IOMEM(x)	x
+#else
+#define IOMEM(x)	((void __force __iomem *)(x))
+#endif
+
+#define MSM_VIC_BASE          IOMEM(0xE0000000)
 #define MSM_VIC_PHYS          0xC0000000
 #define MSM_VIC_SIZE          SZ_4K
 
-#define MSM_CSR_BASE          0xE0001000
+#define MSM_CSR_BASE          IOMEM(0xE0001000)
 #define MSM_CSR_PHYS          0xC0100000
 #define MSM_CSR_SIZE          SZ_4K
 
@@ -49,56 +55,67 @@
 #define MSM_GPT_BASE          MSM_CSR_BASE
 #define MSM_GPT_SIZE          SZ_4K
 
-#define MSM_DMOV_BASE         0xE0002000
+#define MSM_DMOV_BASE         IOMEM(0xE0002000)
 #define MSM_DMOV_PHYS         0xA9700000
 #define MSM_DMOV_SIZE         SZ_4K
 
-#define MSM_UART1_BASE        0xE0003000
+#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
+#define MSM_GPIO1_PHYS        0xA9200000
+#define MSM_GPIO1_SIZE        SZ_4K
+
+#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
+#define MSM_GPIO2_PHYS        0xA9300000
+#define MSM_GPIO2_SIZE        SZ_4K
+
+#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
+#define MSM_CLK_CTL_PHYS      0xA8600000
+#define MSM_CLK_CTL_SIZE      SZ_4K
+
+#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
+#define MSM_SHARED_RAM_PHYS   0x01F00000
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
 #define MSM_UART1_PHYS        0xA9A00000
 #define MSM_UART1_SIZE        SZ_4K
 
-#define MSM_UART2_BASE        0xE0004000
 #define MSM_UART2_PHYS        0xA9B00000
 #define MSM_UART2_SIZE        SZ_4K
 
-#define MSM_UART3_BASE        0xE0005000
 #define MSM_UART3_PHYS        0xA9C00000
 #define MSM_UART3_SIZE        SZ_4K
 
-#define MSM_I2C_BASE          0xE0006000
-#define MSM_I2C_PHYS          0xA9900000
-#define MSM_I2C_SIZE          SZ_4K
+#define MSM_SDC1_PHYS         0xA0400000
+#define MSM_SDC1_SIZE         SZ_4K
 
-#define MSM_GPIO1_BASE        0xE0007000
-#define MSM_GPIO1_PHYS        0xA9200000
-#define MSM_GPIO1_SIZE        SZ_4K
+#define MSM_SDC2_PHYS         0xA0500000
+#define MSM_SDC2_SIZE         SZ_4K
 
-#define MSM_GPIO2_BASE        0xE0008000
-#define MSM_GPIO2_PHYS        0xA9300000
-#define MSM_GPIO2_SIZE        SZ_4K
+#define MSM_SDC3_PHYS         0xA0600000
+#define MSM_SDC3_SIZE         SZ_4K
+
+#define MSM_SDC4_PHYS         0xA0700000
+#define MSM_SDC4_SIZE         SZ_4K
+
+#define MSM_I2C_PHYS          0xA9900000
+#define MSM_I2C_SIZE          SZ_4K
 
-#define MSM_HSUSB_BASE        0xE0009000
 #define MSM_HSUSB_PHYS        0xA0800000
 #define MSM_HSUSB_SIZE        SZ_4K
 
-#define MSM_CLK_CTL_BASE      0xE000A000
-#define MSM_CLK_CTL_PHYS      0xA8600000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_PMDH_BASE         0xE000B000
 #define MSM_PMDH_PHYS         0xAA600000
 #define MSM_PMDH_SIZE         SZ_4K
 
-#define MSM_EMDH_BASE         0xE000C000
 #define MSM_EMDH_PHYS         0xAA700000
 #define MSM_EMDH_SIZE         SZ_4K
 
-#define MSM_MDP_BASE          0xE0010000
 #define MSM_MDP_PHYS          0xAA200000
 #define MSM_MDP_SIZE          0x000F0000
 
-#define MSM_SHARED_RAM_BASE   0xE0100000
-#define MSM_SHARED_RAM_PHYS   0x01F00000
-#define MSM_SHARED_RAM_SIZE   SZ_1M
+#define MSM_MDC_PHYS	      0xAA500000
+#define MSM_MDC_SIZE	      SZ_1M
+
+#define MSM_AD5_PHYS          0xAC000000
+#define MSM_AD5_SIZE          (SZ_1M*13)
+
 
 #endif
diff --git a/arch/arm/mach-msm/include/mach/vreg.h b/arch/arm/mach-msm/include/mach/vreg.h
new file mode 100644
index 0000000..9f9e25c
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/vreg.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/arch-msm/vreg.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_VREG_H
+#define __ARCH_ARM_MACH_MSM_VREG_H
+
+struct vreg;
+
+struct vreg *vreg_get(struct device *dev, const char *id);
+void vreg_put(struct vreg *vreg);
+
+int vreg_enable(struct vreg *vreg);
+void vreg_disable(struct vreg *vreg);
+int vreg_set_level(struct vreg *vreg, unsigned mv);
+
+#endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 5976200..6e7692f 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -18,9 +18,9 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/page.h>
 #include <mach/msm_iomap.h>
 #include <asm/mach/map.h>
@@ -28,7 +28,7 @@
 #include <mach/board.h>
 
 #define MSM_DEVICE(name) { \
-		.virtual = MSM_##name##_BASE, \
+		.virtual = (unsigned long) MSM_##name##_BASE, \
 		.pfn = __phys_to_pfn(MSM_##name##_PHYS), \
 		.length = MSM_##name##_SIZE, \
 		.type = MT_DEVICE_NONSHARED, \
@@ -39,19 +39,11 @@ static struct map_desc msm_io_desc[] __initdata = {
 	MSM_DEVICE(CSR),
 	MSM_DEVICE(GPT),
 	MSM_DEVICE(DMOV),
-	MSM_DEVICE(UART1),
-	MSM_DEVICE(UART2),
-	MSM_DEVICE(UART3),
-	MSM_DEVICE(I2C),
 	MSM_DEVICE(GPIO1),
 	MSM_DEVICE(GPIO2),
-	MSM_DEVICE(HSUSB),
 	MSM_DEVICE(CLK_CTL),
-	MSM_DEVICE(PMDH),
-	MSM_DEVICE(EMDH),
-	MSM_DEVICE(MDP),
 	{
-		.virtual =  MSM_SHARED_RAM_BASE,
+		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
 		.pfn =      __phys_to_pfn(MSM_SHARED_RAM_PHYS),
 		.length =   MSM_SHARED_RAM_SIZE,
 		.type =     MT_DEVICE,
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
index 66901ba..69ca0dd 100644
--- a/arch/arm/mach-msm/irq.c
+++ b/arch/arm/mach-msm/irq.c
@@ -19,11 +19,10 @@
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
 #include <linux/timer.h>
-
 #include <linux/irq.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
+#include <mach/hardware.h>
 
 #include <mach/msm_iomap.h>
 
@@ -67,20 +66,20 @@
 
 static void msm_irq_ack(unsigned int irq)
 {
-	unsigned reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0);
+	void __iomem *reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0);
 	irq = 1 << (irq & 31);
 	writel(irq, reg);
 }
 
 static void msm_irq_mask(unsigned int irq)
 {
-	unsigned reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0);
+	void __iomem *reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0);
 	writel(1 << (irq & 31), reg);
 }
 
 static void msm_irq_unmask(unsigned int irq)
 {
-	unsigned reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0);
+	void __iomem *reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0);
 	writel(1 << (irq & 31), reg);
 }
 
@@ -91,8 +90,8 @@ static int msm_irq_set_wake(unsigned int irq, unsigned int on)
 
 static int msm_irq_set_type(unsigned int irq, unsigned int flow_type)
 {
-	unsigned treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0);
-	unsigned preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0);
+	void __iomem *treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0);
+	void __iomem *preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0);
 	int b = 1 << (irq & 31);
 
 	if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
new file mode 100644
index 0000000..915ee70
--- /dev/null
+++ b/arch/arm/mach-msm/proc_comm.c
@@ -0,0 +1,110 @@
+/* arch/arm/mach-msm/proc_comm.c
+ *
+ * Copyright (C) 2007-2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <mach/msm_iomap.h>
+#include <mach/system.h>
+
+#include "proc_comm.h"
+
+#define MSM_A2M_INT(n) (MSM_CSR_BASE + 0x400 + (n) * 4)
+
+static inline void notify_other_proc_comm(void)
+{
+	writel(1, MSM_A2M_INT(6));
+}
+
+#define APP_COMMAND 0x00
+#define APP_STATUS  0x04
+#define APP_DATA1   0x08
+#define APP_DATA2   0x0C
+
+#define MDM_COMMAND 0x10
+#define MDM_STATUS  0x14
+#define MDM_DATA1   0x18
+#define MDM_DATA2   0x1C
+
+static DEFINE_SPINLOCK(proc_comm_lock);
+
+/* The higher level SMD support will install this to
+ * provide a way to check for and handle modem restart.
+ */
+int (*msm_check_for_modem_crash)(void);
+
+/* Poll for a state change, checking for possible
+ * modem crashes along the way (so we don't wait
+ * forever while the ARM9 is blowing up).
+ *
+ * Return an error in the event of a modem crash and
+ * restart so the msm_proc_comm() routine can restart
+ * the operation from the beginning.
+ */
+static int proc_comm_wait_for(void __iomem *addr, unsigned value)
+{
+	for (;;) {
+		if (readl(addr) == value)
+			return 0;
+
+		if (msm_check_for_modem_crash)
+			if (msm_check_for_modem_crash())
+				return -EAGAIN;
+	}
+}
+
+int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
+{
+	void __iomem *base = MSM_SHARED_RAM_BASE;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&proc_comm_lock, flags);
+
+	for (;;) {
+		if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY))
+			continue;
+
+		writel(cmd, base + APP_COMMAND);
+		writel(data1 ? *data1 : 0, base + APP_DATA1);
+		writel(data2 ? *data2 : 0, base + APP_DATA2);
+
+		notify_other_proc_comm();
+
+		if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE))
+			continue;
+
+		if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) {
+			if (data1)
+				*data1 = readl(base + APP_DATA1);
+			if (data2)
+				*data2 = readl(base + APP_DATA2);
+			ret = 0;
+		} else {
+			ret = -EIO;
+		}
+		break;
+	}
+
+	writel(PCOM_CMD_IDLE, base + APP_COMMAND);
+
+	spin_unlock_irqrestore(&proc_comm_lock, flags);
+
+	return ret;
+}
+
+
diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h
new file mode 100644
index 0000000..834760f
--- /dev/null
+++ b/arch/arm/mach-msm/proc_comm.h
@@ -0,0 +1,165 @@
+/* arch/arm/mach-msm/proc_comm.h
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
+#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
+
+enum {
+	PCOM_CMD_IDLE = 0x0,
+	PCOM_CMD_DONE,
+	PCOM_RESET_APPS,
+	PCOM_RESET_CHIP,
+	PCOM_CONFIG_NAND_MPU,
+	PCOM_CONFIG_USB_CLKS,
+	PCOM_GET_POWER_ON_STATUS,
+	PCOM_GET_WAKE_UP_STATUS,
+	PCOM_GET_BATT_LEVEL,
+	PCOM_CHG_IS_CHARGING,
+	PCOM_POWER_DOWN,
+	PCOM_USB_PIN_CONFIG,
+	PCOM_USB_PIN_SEL,
+	PCOM_SET_RTC_ALARM,
+	PCOM_NV_READ,
+	PCOM_NV_WRITE,
+	PCOM_GET_UUID_HIGH,
+	PCOM_GET_UUID_LOW,
+	PCOM_GET_HW_ENTROPY,
+	PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE,
+	PCOM_CLKCTL_RPC_ENABLE,
+	PCOM_CLKCTL_RPC_DISABLE,
+	PCOM_CLKCTL_RPC_RESET,
+	PCOM_CLKCTL_RPC_SET_FLAGS,
+	PCOM_CLKCTL_RPC_SET_RATE,
+	PCOM_CLKCTL_RPC_MIN_RATE,
+	PCOM_CLKCTL_RPC_MAX_RATE,
+	PCOM_CLKCTL_RPC_RATE,
+	PCOM_CLKCTL_RPC_PLL_REQUEST,
+	PCOM_CLKCTL_RPC_ENABLED,
+	PCOM_VREG_SWITCH,
+	PCOM_VREG_SET_LEVEL,
+	PCOM_GPIO_TLMM_CONFIG_GROUP,
+	PCOM_GPIO_TLMM_UNCONFIG_GROUP,
+	PCOM_NV_WRITE_BYTES_4_7,
+	PCOM_CONFIG_DISP,
+	PCOM_GET_FTM_BOOT_COUNT,
+	PCOM_RPC_GPIO_TLMM_CONFIG_EX,
+	PCOM_PM_MPP_CONFIG,
+	PCOM_GPIO_IN,
+	PCOM_GPIO_OUT,
+	PCOM_RESET_MODEM,
+	PCOM_RESET_CHIP_IMM,
+	PCOM_PM_VID_EN,
+	PCOM_VREG_PULLDOWN,
+	PCOM_NUM_CMDS,
+};
+
+enum {
+	 PCOM_INVALID_STATUS = 0x0,
+	 PCOM_READY,
+	 PCOM_CMD_RUNNING,
+	 PCOM_CMD_SUCCESS,
+	 PCOM_CMD_FAIL,
+};
+
+/* List of VREGs that support the Pull Down Resistor setting. */
+enum {
+	PM_VREG_PDOWN_MSMA_ID,
+	PM_VREG_PDOWN_MSMP_ID,
+	PM_VREG_PDOWN_MSME1_ID,	/* Not supported in Panoramix */
+	PM_VREG_PDOWN_MSMC1_ID,	/* Not supported in PM6620 */
+	PM_VREG_PDOWN_MSMC2_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP3_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_MSME2_ID,	/* Supported in PM7500 and Panoramix only */
+	PM_VREG_PDOWN_GP4_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP1_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_TCXO_ID,
+	PM_VREG_PDOWN_PA_ID,
+	PM_VREG_PDOWN_RFTX_ID,
+	PM_VREG_PDOWN_RFRX1_ID,
+	PM_VREG_PDOWN_RFRX2_ID,
+	PM_VREG_PDOWN_SYNT_ID,
+	PM_VREG_PDOWN_WLAN_ID,
+	PM_VREG_PDOWN_USB_ID,
+	PM_VREG_PDOWN_MMC_ID,
+	PM_VREG_PDOWN_RUIM_ID,
+	PM_VREG_PDOWN_MSMC0_ID,	/* Supported in PM6610 only */
+	PM_VREG_PDOWN_GP2_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP5_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP6_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_RF_ID,
+	PM_VREG_PDOWN_RF_VCO_ID,
+	PM_VREG_PDOWN_MPLL_ID,
+	PM_VREG_PDOWN_S2_ID,
+	PM_VREG_PDOWN_S3_ID,
+	PM_VREG_PDOWN_RFUBM_ID,
+
+	/* new for HAN */
+	PM_VREG_PDOWN_RF1_ID,
+	PM_VREG_PDOWN_RF2_ID,
+	PM_VREG_PDOWN_RFA_ID,
+	PM_VREG_PDOWN_CDC2_ID,
+	PM_VREG_PDOWN_RFTX2_ID,
+	PM_VREG_PDOWN_USIM_ID,
+	PM_VREG_PDOWN_USB2P6_ID,
+	PM_VREG_PDOWN_USB3P3_ID,
+	PM_VREG_PDOWN_INVALID_ID,
+
+	/* backward compatible enums only */
+	PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID,
+	PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID,
+	PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID,
+	PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID,
+	PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID,
+	PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID,
+
+	PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID,
+	PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID,
+	PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID,
+	PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID,
+	PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
+};
+
+/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
+
+#define GPIO_ENABLE	0
+#define GPIO_DISABLE	1
+
+#define GPIO_INPUT	0
+#define GPIO_OUTPUT	1
+
+#define GPIO_NO_PULL	0
+#define GPIO_PULL_DOWN	1
+#define GPIO_KEEPER	2
+#define GPIO_PULL_UP	3
+
+#define GPIO_2MA	0
+#define GPIO_4MA	1
+#define GPIO_6MA	2
+#define GPIO_8MA	3
+#define GPIO_10MA	4
+#define GPIO_12MA	5
+#define GPIO_14MA	6
+#define GPIO_16MA	7
+
+#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \
+		((((gpio) & 0x3FF) << 4)	| \
+		((func) & 0xf)			| \
+		(((dir) & 0x1) << 14)		| \
+		(((pull) & 0x3) << 15)		| \
+		(((drvstr) & 0xF) << 17))
+
+int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
+
+#endif
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 9f02d7d..345a14c 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -20,12 +20,11 @@
 #include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 
 #include <asm/mach/time.h>
 #include <mach/msm_iomap.h>
 
-#include <asm/io.h>
-
 #define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)
 #define MSM_DGT_SHIFT (5)
 
@@ -46,7 +45,7 @@ struct msm_clock {
 	struct clock_event_device   clockevent;
 	struct clocksource          clocksource;
 	struct irqaction            irq;
-	uint32_t                    regbase;
+	void __iomem                *regbase;
 	uint32_t                    freq;
 	uint32_t                    shift;
 };
diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c
new file mode 100644
index 0000000..fcb0b9f
--- /dev/null
+++ b/arch/arm/mach-msm/vreg.c
@@ -0,0 +1,143 @@
+/* arch/arm/mach-msm/vreg.c
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <mach/vreg.h>
+
+#include "proc_comm.h"
+
+struct vreg {
+	const char *name;
+	unsigned id;
+};
+
+#define VREG(_name, _id) { .name = _name, .id = _id, }
+
+static struct vreg vregs[] = {
+	VREG("msma",	0),
+	VREG("msmp",	1),
+	VREG("msme1",	2),
+	VREG("msmc1",	3),
+	VREG("msmc2",	4),
+	VREG("gp3",	5),
+	VREG("msme2",	6),
+	VREG("gp4",	7),
+	VREG("gp1",	8),
+	VREG("tcxo",	9),
+	VREG("pa",	10),
+	VREG("rftx",	11),
+	VREG("rfrx1",	12),
+	VREG("rfrx2",	13),
+	VREG("synt",	14),
+	VREG("wlan",	15),
+	VREG("usb",	16),
+	VREG("boost",	17),
+	VREG("mmc",	18),
+	VREG("ruim",	19),
+	VREG("msmc0",	20),
+	VREG("gp2",	21),
+	VREG("gp5",	22),
+	VREG("gp6",	23),
+	VREG("rf",	24),
+	VREG("rf_vco",	26),
+	VREG("mpll",	27),
+	VREG("s2",	28),
+	VREG("s3",	29),
+	VREG("rfubm",	30),
+	VREG("ncp",	31),
+};
+
+struct vreg *vreg_get(struct device *dev, const char *id)
+{
+	int n;
+	for (n = 0; n < ARRAY_SIZE(vregs); n++) {
+		if (!strcmp(vregs[n].name, id))
+			return vregs + n;
+	}
+	return 0;
+}
+
+void vreg_put(struct vreg *vreg)
+{
+}
+
+int vreg_enable(struct vreg *vreg)
+{
+	unsigned id = vreg->id;
+	unsigned enable = 1;
+	return msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+}
+
+void vreg_disable(struct vreg *vreg)
+{
+	unsigned id = vreg->id;
+	unsigned enable = 0;
+	msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+}
+
+int vreg_set_level(struct vreg *vreg, unsigned mv)
+{
+	unsigned id = vreg->id;
+	return msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
+}
+
+#if defined(CONFIG_DEBUG_FS)
+
+static int vreg_debug_set(void *data, u64 val)
+{
+	struct vreg *vreg = data;
+	switch (val) {
+	case 0:
+		vreg_disable(vreg);
+		break;
+	case 1:
+		vreg_enable(vreg);
+		break;
+	default:
+		vreg_set_level(vreg, val);
+		break;
+	}
+	return 0;
+}
+
+static int vreg_debug_get(void *data, u64 *val)
+{
+	return -ENOSYS;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n");
+
+static int __init vreg_debug_init(void)
+{
+	struct dentry *dent;
+	int n;
+
+	dent = debugfs_create_dir("vreg", 0);
+	if (IS_ERR(dent))
+		return 0;
+
+	for (n = 0; n < ARRAY_SIZE(vregs); n++)
+		(void) debugfs_create_file(vregs[n].name, 0644,
+					   dent, vregs + n, &vreg_fops);
+
+	return 0;
+}
+
+device_initcall(vreg_debug_init);
+#endif
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 4004b67..311d5b0 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 953a26c..238a2f8 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -285,6 +285,11 @@ static struct resource mv78xx0_ge00_shared_resources[] = {
 		.start	= GE00_PHYS_BASE + 0x2000,
 		.end	= GE00_PHYS_BASE + 0x3fff,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "ge err irq",
+		.start	= IRQ_MV78XX0_GE_ERR,
+		.end	= IRQ_MV78XX0_GE_ERR,
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -294,7 +299,7 @@ static struct platform_device mv78xx0_ge00_shared = {
 	.dev		= {
 		.platform_data	= &mv78xx0_ge00_shared_data,
 	},
-	.num_resources	= 1,
+	.num_resources	= ARRAY_SIZE(mv78xx0_ge00_shared_resources),
 	.resource	= mv78xx0_ge00_shared_resources,
 };
 
@@ -330,6 +335,7 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 struct mv643xx_eth_shared_platform_data mv78xx0_ge01_shared_data = {
 	.t_clk		= 0,
 	.dram		= &mv78xx0_mbus_dram_info,
+	.shared_smi	= &mv78xx0_ge00_shared,
 };
 
 static struct resource mv78xx0_ge01_shared_resources[] = {
@@ -370,7 +376,6 @@ static struct platform_device mv78xx0_ge01 = {
 void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	eth_data->shared = &mv78xx0_ge01_shared;
-	eth_data->shared_smi = &mv78xx0_ge00_shared;
 	mv78xx0_ge01.dev.platform_data = eth_data;
 
 	platform_device_register(&mv78xx0_ge01_shared);
@@ -384,6 +389,7 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 struct mv643xx_eth_shared_platform_data mv78xx0_ge10_shared_data = {
 	.t_clk		= 0,
 	.dram		= &mv78xx0_mbus_dram_info,
+	.shared_smi	= &mv78xx0_ge00_shared,
 };
 
 static struct resource mv78xx0_ge10_shared_resources[] = {
@@ -424,7 +430,6 @@ static struct platform_device mv78xx0_ge10 = {
 void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	eth_data->shared = &mv78xx0_ge10_shared;
-	eth_data->shared_smi = &mv78xx0_ge00_shared;
 	mv78xx0_ge10.dev.platform_data = eth_data;
 
 	platform_device_register(&mv78xx0_ge10_shared);
@@ -438,6 +443,7 @@ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
 struct mv643xx_eth_shared_platform_data mv78xx0_ge11_shared_data = {
 	.t_clk		= 0,
 	.dram		= &mv78xx0_mbus_dram_info,
+	.shared_smi	= &mv78xx0_ge00_shared,
 };
 
 static struct resource mv78xx0_ge11_shared_resources[] = {
@@ -478,7 +484,6 @@ static struct platform_device mv78xx0_ge11 = {
 void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	eth_data->shared = &mv78xx0_ge11_shared;
-	eth_data->shared_smi = &mv78xx0_ge00_shared;
 	mv78xx0_ge11.dev.platform_data = eth_data;
 
 	platform_device_register(&mv78xx0_ge11_shared);
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index a2d0c97..2e285bb 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -13,25 +13,30 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data db78x00_ge00_data = {
-	.phy_addr	= 8,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
 static struct mv643xx_eth_platform_data db78x00_ge01_data = {
-	.phy_addr	= 9,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
 };
 
 static struct mv643xx_eth_platform_data db78x00_ge10_data = {
-	.phy_addr	= -1,
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct mv643xx_eth_platform_data db78x00_ge11_data = {
-	.phy_addr	= -1,
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct mv_sata_platform_data db78x00_sata_data = {
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
index ed4a46b..fbfb269 100644
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -26,14 +26,22 @@
 	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
 	mov	\irqnr, #31
 	ands	\irqstat, \irqstat, \tmp
+	bne	1001f
 
 	@ if no low interrupts set, check high interrupts
-	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	moveq	\irqnr, #63
-	andeqs	\irqstat, \irqstat, \tmp
+	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	mov	\irqnr, #63
+	ands	\irqstat, \irqstat, \tmp
+	bne	1001f
+
+	@ if no high interrupts set, check error interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_ERR_OFF]
+	mov	\irqnr, #95
+	ands	\irqstat, \irqstat, \tmp
 
 	@ find first active interrupt source
-	clzne	\irqstat, \irqstat
+1001:	clzne	\irqstat, \irqstat
 	subne	\irqnr, \irqnr, \irqstat
 	.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
index 995d7fb..bebc330 100644
--- a/arch/arm/mach-mv78xx0/include/mach/irqs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -80,9 +80,14 @@
 #define IRQ_MV78XX0_DB_OUT	61
 
 /*
+ * MV78xx0 Error Interrupt Controller
+ */
+#define IRQ_MV78XX0_GE_ERR	70
+
+/*
  * MV78XX0 General Purpose Pins
  */
-#define IRQ_MV78XX0_GPIO_START	64
+#define IRQ_MV78XX0_GPIO_START	96
 #define NR_GPIO_IRQS		GPIO_MAX
 
 #define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index ad66417..ee9c559 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -71,8 +71,10 @@
 #define   BRIDGE_INT_TIMER1	0x0004
 #define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
 #define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_ERR_OFF	0x0000
 #define   IRQ_CAUSE_LOW_OFF	0x0004
 #define   IRQ_CAUSE_HIGH_OFF	0x0008
+#define   IRQ_MASK_ERR_OFF	0x000c
 #define   IRQ_MASK_LOW_OFF	0x0010
 #define   IRQ_MASK_HIGH_OFF	0x0014
 #define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 28248d3..503e5d1 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -19,4 +19,5 @@ void __init mv78xx0_init_irq(void)
 {
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
 }
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
new file mode 100644
index 0000000..c77a4b8
--- /dev/null
+++ b/arch/arm/mach-mx2/devices.h
@@ -0,0 +1,15 @@
+
+extern struct platform_device mxc_gpt1;
+extern struct platform_device mxc_gpt2;
+extern struct platform_device mxc_gpt3;
+extern struct platform_device mxc_gpt4;
+extern struct platform_device mxc_gpt5;
+extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_irda_device;
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_uart_device5;
+
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 4ce56ef..56e22d3 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -34,6 +34,8 @@
 #include <mach/iomux-mx1-mx2.h>
 #include <mach/board-mx27ads.h>
 
+#include "devices.h"
+
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
 	.width = 2,
@@ -251,12 +253,14 @@ static struct imxuart_platform_data uart_pdata[] = {
 
 static void __init mx27ads_board_init(void)
 {
-	int i;
-
 	gpio_fec_active();
 
-	for (i = 0; i < 6; i++)
-		imx_init_uart(i, &uart_pdata[i]);
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 1028f45..7f55746 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -28,6 +28,8 @@
 #include <mach/imx-uart.h>
 #include <mach/board-pcm038.h>
 
+#include "devices.h"
+
 /*
  * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
  * 16 bit width
@@ -170,11 +172,11 @@ static struct platform_device *platform_devices[] __initdata = {
 
 static void __init pcm038_init(void)
 {
-	int i;
 	gpio_fec_active();
 
-	for (i = 0; i < 3; i++)
-		imx_init_uart(i, &uart_pdata[i]);
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index e31fd44..16debc2 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -35,7 +35,7 @@ static struct resource uart0[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device0 = {
+struct platform_device mxc_uart_device0 = {
 	.name = "imx-uart",
 	.id = 0,
 	.resource = uart0,
@@ -54,7 +54,7 @@ static struct resource uart1[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device1 = {
+struct platform_device mxc_uart_device1 = {
 	.name = "imx-uart",
 	.id = 1,
 	.resource = uart1,
@@ -73,7 +73,7 @@ static struct resource uart2[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device2 = {
+struct platform_device mxc_uart_device2 = {
 	.name = "imx-uart",
 	.id = 2,
 	.resource = uart2,
@@ -92,7 +92,7 @@ static struct resource uart3[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device3 = {
+struct platform_device mxc_uart_device3 = {
 	.name = "imx-uart",
 	.id = 3,
 	.resource = uart3,
@@ -111,7 +111,7 @@ static struct resource uart4[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device4 = {
+struct platform_device mxc_uart_device4 = {
 	.name = "imx-uart",
 	.id = 4,
 	.resource = uart4,
@@ -130,48 +130,9 @@ static struct resource uart5[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device5 = {
+struct platform_device mxc_uart_device5 = {
 	.name = "imx-uart",
 	.id = 5,
 	.resource = uart5,
 	.num_resources = ARRAY_SIZE(uart5),
 };
-
-/*
- * Register only those UARTs that physically exists
- */
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
-{
-	switch (uart_no) {
-	case 0:
-		mxc_uart_device0.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device0);
-		break;
-	case 1:
-		mxc_uart_device1.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device1);
-		break;
-#ifndef CONFIG_MXC_IRDA
-	case 2:
-		mxc_uart_device2.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device2);
-		break;
-#endif
-	case 3:
-		mxc_uart_device3.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device3);
-		break;
-	case 4:
-		mxc_uart_device4.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device4);
-		break;
-	case 5:
-		mxc_uart_device5.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device5);
-		break;
-	default:
-		return -ENODEV;
-	}
-
-	return 0;
-}
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index e08c6a8..a6bdcc0 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -36,7 +36,7 @@ static struct resource uart0[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device0 = {
+struct platform_device mxc_uart_device0 = {
 	.name = "imx-uart",
 	.id = 0,
 	.resource = uart0,
@@ -55,7 +55,7 @@ static struct resource uart1[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device1 = {
+struct platform_device mxc_uart_device1 = {
 	.name = "imx-uart",
 	.id = 1,
 	.resource = uart1,
@@ -74,7 +74,7 @@ static struct resource uart2[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device2 = {
+struct platform_device mxc_uart_device2 = {
 	.name = "imx-uart",
 	.id = 2,
 	.resource = uart2,
@@ -93,7 +93,7 @@ static struct resource uart3[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device3 = {
+struct platform_device mxc_uart_device3 = {
 	.name = "imx-uart",
 	.id = 3,
 	.resource = uart3,
@@ -112,46 +112,13 @@ static struct resource uart4[] = {
 	},
 };
 
-static struct platform_device mxc_uart_device4 = {
+struct platform_device mxc_uart_device4 = {
 	.name = "imx-uart",
 	.id = 4,
 	.resource = uart4,
 	.num_resources = ARRAY_SIZE(uart4),
 };
 
-/*
- * Register only those UARTs that physically exist
- */
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
-{
-	switch (uart_no) {
-	case 0:
-		mxc_uart_device0.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device0);
-		break;
-	case 1:
-		mxc_uart_device1.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device1);
-		break;
-	case 2:
-		mxc_uart_device2.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device2);
-		break;
-	case 3:
-		mxc_uart_device3.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device3);
-		break;
-	case 4:
-		mxc_uart_device4.dev.platform_data = pdata;
-		platform_device_register(&mxc_uart_device4);
-		break;
-	default:
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	[0] = {
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
new file mode 100644
index 0000000..4dc03f9
--- /dev/null
+++ b/arch/arm/mach-mx3/devices.h
@@ -0,0 +1,6 @@
+
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 3dda1fe..6e664be 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -43,7 +43,8 @@ static DEFINE_SPINLOCK(gpio_mux_lock);
  */
 int mxc_iomux_mode(unsigned int pin_mode)
 {
-	u32 reg, field, l, mode, ret = 0;
+	u32 field, l, mode, ret = 0;
+	void __iomem *reg;
 
 	reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
 	field = pin_mode & 0x3;
@@ -70,7 +71,8 @@ EXPORT_SYMBOL(mxc_iomux_mode);
  */
 void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 {
-	u32 reg, field, l;
+	u32 field, l;
+	void __iomem *reg;
 
 	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3;
 	field = (pin + 2) % 3;
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 30d842b..0589b5c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -49,7 +49,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.virtual	= AVIC_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(AVIC_BASE_ADDR),
 		.length		= AVIC_SIZE,
-		.type		= MT_NONSHARED_DEVICE
+		.type		= MT_DEVICE_NONSHARED
 	},
 };
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 60fb4e0..1be4a39 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -31,6 +32,8 @@
 #include <asm/mach/map.h>
 #include <mach/common.h>
 #include <mach/board-mx31ads.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
 
 /*!
  * @file mx31ads.c
@@ -84,6 +87,108 @@ static inline int mxc_init_extuart(void)
 }
 #endif
 
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
+	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
+	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
+	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* !SERIAL_IMX */
+
+static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	u32 imr_val;
+	u32 int_valid;
+	u32 expio_irq;
+
+	imr_val = __raw_readw(PBC_INTMASK_SET_REG);
+	int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
+
+	expio_irq = MXC_EXP_IO_BASE;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		if ((int_valid & 1) == 0)
+			continue;
+
+		generic_handle_irq(expio_irq);
+	}
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq           an expio virtual irq number
+ */
+static void expio_mask_irq(u32 irq)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+	/* mask the interrupt */
+	__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
+	__raw_readw(PBC_INTMASK_CLEAR_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq           an expanded io virtual irq number
+ */
+static void expio_ack_irq(u32 irq)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+	/* clear the interrupt status */
+	__raw_writew(1 << expio, PBC_INTSTATUS_REG);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq           a expio virtual irq number
+ */
+static void expio_unmask_irq(u32 irq)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+	/* unmask the interrupt */
+	__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.ack = expio_ack_irq,
+	.mask = expio_mask_irq,
+	.unmask = expio_unmask_irq,
+};
+
+static void __init mx31ads_init_expio(void)
+{
+	int i;
+
+	printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO));
+
+	/* disable the interrupt and clear the status */
+	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
+	__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
+	for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+	     i++) {
+		set_irq_chip(i, &expio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
+	set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
+}
+
 /*!
  * This structure defines static mappings for the i.MX31ADS board.
  */
@@ -92,17 +197,17 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
 		.virtual	= AIPS1_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
 		.length		= AIPS1_SIZE,
-		.type		= MT_NONSHARED_DEVICE
+		.type		= MT_DEVICE_NONSHARED
 	}, {
 		.virtual	= SPBA0_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
 		.length		= SPBA0_SIZE,
-		.type		= MT_NONSHARED_DEVICE
+		.type		= MT_DEVICE_NONSHARED
 	}, {
 		.virtual	= AIPS2_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
 		.length		= AIPS2_SIZE,
-		.type		= MT_NONSHARED_DEVICE
+		.type		= MT_DEVICE_NONSHARED
 	}, {
 		.virtual	= CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
@@ -120,12 +225,19 @@ void __init mx31ads_map_io(void)
 	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
+void __init mx31ads_init_irq(void)
+{
+	mxc_init_irq();
+	mx31ads_init_expio();
+}
+
 /*!
  * Board specific initialization.
  */
 static void __init mxc_board_init(void)
 {
 	mxc_init_extuart();
+	mxc_init_imx_uart();
 }
 
 static void __init mx31ads_timer_init(void)
@@ -148,7 +260,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31ads_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index d363a6e..c4344007 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -45,17 +45,17 @@ static struct map_desc mx31lite_io_desc[] __initdata = {
 		.virtual = AIPS1_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
 		.length = AIPS1_SIZE,
-		.type = MT_NONSHARED_DEVICE
+		.type = MT_DEVICE_NONSHARED
 	}, {
 		.virtual = SPBA0_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
 		.length = SPBA0_SIZE,
-		.type = MT_NONSHARED_DEVICE
+		.type = MT_DEVICE_NONSHARED
 	}, {
 		.virtual = AIPS2_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
 		.length = AIPS2_SIZE,
-		.type = MT_NONSHARED_DEVICE
+		.type = MT_DEVICE_NONSHARED
 	}, {
 		.virtual = CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index df8582a..11fda95 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -33,6 +33,8 @@
 #include <mach/iomux-mx3.h>
 #include <mach/board-pcm037.h>
 
+#include "devices.h"
+
 static struct physmap_flash_data pcm037_flash_data = {
 	.width  = 2,
 };
@@ -73,12 +75,12 @@ static void __init mxc_board_init(void)
 	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
 	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
 
-	imx_init_uart(0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
 	mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
 	mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
 
-	imx_init_uart(2, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
 }
 
 /*
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 1b40483..79df60c 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -22,10 +22,10 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
-#include <asm/io.h>
 #include <mach/netx-regs.h>
 #include <asm/mach/irq.h>
 
@@ -77,15 +77,12 @@ netx_hif_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
 	stat = ((readl(NETX_DPMAS_INT_EN) &
 		readl(NETX_DPMAS_INT_STAT)) >> 24) & 0x1f;
 
-	desc = irq_desc + NETX_IRQ_HIF_CHAINED(0);
-
 	while (stat) {
 		if (stat & 1) {
 			DEBUG_IRQ("handling irq %d\n", irq);
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		irq++;
-		desc++;
 		stat >>= 1;
 	}
 }
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
index 27d8ef8..6c1023b 100644
--- a/arch/arm/mach-netx/include/mach/system.h
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include "netx-regs.h"
 
diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c
index 19ae0a7..0398494 100644
--- a/arch/arm/mach-netx/pfifo.c
+++ b/arch/arm/mach-netx/pfifo.c
@@ -20,8 +20,8 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/hardware.h>
 #include <mach/netx-regs.h>
 #include <mach/pfifo.h>
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index ac8e5bf..7c540c1 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -21,9 +21,9 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clocksource.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach/time.h>
 #include <mach/netx-regs.h>
 
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index 04c34e8..32eabf5 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -21,8 +21,8 @@
 #include <linux/device.h>
 #include <linux/firmware.h>
 #include <linux/mutex.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/hardware.h>
 #include <mach/netx-regs.h>
 
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index a22a608..b45bb3b 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -86,13 +86,10 @@ static void a9m9750dev_fpga_demux_handler(unsigned int irq,
 
 	while (stat != 0) {
 		int irqno = fls(stat) - 1;
-		struct irq_desc *fpgadesc;
 
 		stat &= ~(1 << irqno);
 
-		fpgadesc = irq_desc + FPGA_IRQ(irqno);
-
-		desc_handle_irq(FPGA_IRQ(irqno), fpgadesc);
+		generic_handle_irq(FPGA_IRQ(irqno));
 	}
 
 	desc->chip->unmask(irq);
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index 804c300..5241e6a 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -12,13 +12,13 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
+#include <linux/bitops.h>
 
 #include <mach/gpio.h>
 #include <mach/processor.h>
 #include <mach/processor-ns9360.h>
 #include <asm/bug.h>
 #include <asm/types.h>
-#include <asm/bitops.h>
 
 #include "gpio-ns9360.h"
 
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
index 5dbc3c5..1b12d32 100644
--- a/arch/arm/mach-ns9xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H
 
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define __REG(x)	((void __iomem __force *)(x))
 
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index 38260d5..22e0eb6 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -10,7 +10,7 @@
  */
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/mach/irq.h>
 #include <mach/regs-sys-common.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 2ced6d9..adfcd7b 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -476,6 +476,10 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
 		I2C_BOARD_INFO("tps65013", 0x48),
                /* .irq         = OMAP_GPIO_IRQ(??), */
        },
+	{
+		I2C_BOARD_INFO("isp1301_omap", 0x2d),
+		.irq		= OMAP_GPIO_IRQ(14),
+	},
 };
 
 static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 213b487..45a0131 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -21,6 +21,7 @@
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 5965cf0..5fba207 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -17,8 +17,8 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/mach-types.h>
 
 #include <mach/cpu.h>
@@ -201,7 +201,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	parent = clk->parent;
-	if (unlikely(parent == 0))
+	if (unlikely(parent == NULL))
 		return -EIO;
 
 	realrate = parent->rate;
@@ -499,7 +499,7 @@ static int omap1_clk_enable_generic(struct clk *clk)
 	if (clk->flags & ALWAYS_ENABLED)
 		return 0;
 
-	if (unlikely(clk->enable_reg == 0)) {
+	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
 		return -EINVAL;
@@ -535,7 +535,7 @@ static void omap1_clk_disable_generic(struct clk *clk)
 	__u16 regval16;
 	__u32 regval32;
 
-	if (clk->enable_reg == 0)
+	if (clk->enable_reg == NULL)
 		return;
 
 	if (clk->flags & ENABLE_REG_32BIT) {
@@ -577,7 +577,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 		return clk->parent->rate / (1 << dsor_exp);
 	}
 
-	if(clk->round_rate != 0)
+	if (clk->round_rate != NULL)
 		return clk->round_rate(clk, rate);
 
 	return clk->rate;
@@ -625,7 +625,7 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
 
 	/* Clocks in the DSP domain need api_ck. Just assume bootloader
 	 * has not enabled any DSP clocks */
-	if ((u32)clk->enable_reg == DSP_IDLECT2) {
+	if (clk->enable_reg == DSP_IDLECT2) {
 		printk(KERN_INFO "Skipping reset check for DSP domain "
 		       "clock \"%s\"\n", clk->name);
 		return;
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 6eadf72..5635b51 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -324,7 +324,7 @@ static struct clk dspper_ck = {
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL | VIRTUAL_IO_ADDRESS,
-	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_PERCK,
 	.rate_offset	= CKCTL_PERDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc_dsp_domain,
@@ -338,7 +338,7 @@ static struct clk dspxor_ck = {
 	.parent		= &ck_ref,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_IO_ADDRESS,
-	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_XORPCK,
 	.recalc		= &followparent_recalc,
 	.enable		= &omap1_clk_enable_dsp_domain,
@@ -350,7 +350,7 @@ static struct clk dsptim_ck = {
 	.parent		= &ck_ref,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_IO_ADDRESS,
-	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_DSPTIMCK,
 	.recalc		= &followparent_recalc,
 	.enable		= &omap1_clk_enable_dsp_domain,
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index ab708d4..e382b43 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -13,9 +13,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach/map.h>
 
 #include <mach/tc.h>
@@ -101,7 +101,7 @@ static inline void omap_init_mbox(void) { }
 
 #if defined(CONFIG_OMAP_STI)
 
-#define OMAP1_STI_BASE		IO_ADDRESS(0xfffea000)
+#define OMAP1_STI_BASE		0xfffea000
 #define OMAP1_STI_CHANNEL_BASE	(OMAP1_STI_BASE + 0x400)
 
 static struct resource sti_resources[] = {
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 4449d86..0499538 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -21,9 +21,9 @@
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/errno.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
@@ -86,7 +86,6 @@ static void fpga_mask_ack_irq(unsigned int irq)
 
 void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
 {
-	struct irq_desc *d;
 	u32 stat;
 	int fpga_irq;
 
@@ -99,8 +98,7 @@ void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
 	     (fpga_irq < OMAP_FPGA_IRQ_END) && stat;
 	     fpga_irq++, stat >>= 1) {
 		if (stat & 1) {
-			d = irq_desc + fpga_irq;
-			desc_handle_irq(fpga_irq, d);
+			generic_handle_irq(fpga_irq);
 		}
 	}
 }
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index da13c3e..13083d7 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -14,8 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 2b9750b..b3bd8ca 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -11,10 +11,10 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
-#include <asm/io.h>
 #include <mach/mux.h>
 #include <mach/tc.h>
 
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 0ec6c1ec..9ad5197 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -40,6 +40,7 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -47,8 +48,6 @@
 #include <mach/gpio.h>
 #include <mach/cpu.h>
 
-#include <asm/io.h>
-
 #define IRQ_BANK(irq) ((irq) >> 5)
 #define IRQ_BIT(irq)  ((irq) & 0x1f)
 
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 610f51f..71fe2cc 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -12,8 +12,8 @@
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index af44eab..59abbf3 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -13,9 +13,9 @@
 #include <linux/resource.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 #include <mach/mailbox.h>
 #include <mach/irqs.h>
-#include <asm/io.h>
 
 #define MAILBOX_ARM2DSP1		0x00
 #define MAILBOX_ARM2DSP1b		0x04
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 2baeaeb..7de7c69 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -103,30 +103,6 @@ static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
 { }
 #endif
 
-static int omap1_mcbsp_check(unsigned int id)
-{
-	/* REVISIT: Check correctly for number of registered McBSPs */
-	if (cpu_is_omap730()) {
-		if (id > OMAP_MAX_MCBSP_COUNT - 2) {
-		       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
-				id + 1);
-		       return -ENODEV;
-		}
-		return 0;
-	}
-
-	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
-		if (id > OMAP_MAX_MCBSP_COUNT - 1) {
-			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
-				id + 1);
-			return -ENODEV;
-		}
-		return 0;
-	}
-
-	return -ENODEV;
-}
-
 static void omap1_mcbsp_request(unsigned int id)
 {
 	/*
@@ -151,7 +127,6 @@ static void omap1_mcbsp_free(unsigned int id)
 }
 
 static struct omap_mcbsp_ops omap1_mcbsp_ops = {
-	.check		= omap1_mcbsp_check,
 	.request	= omap1_mcbsp_request,
 	.free		= omap1_mcbsp_free,
 };
@@ -160,7 +135,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP730_MCBSP1_BASE,
-		.virt_base	= io_p2v(OMAP730_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
 		.rx_irq		= INT_730_McBSP1RX,
@@ -169,7 +143,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP730_MCBSP2_BASE,
-		.virt_base	= io_p2v(OMAP730_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
 		.rx_irq		= INT_730_McBSP2RX,
@@ -187,7 +160,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP1510_MCBSP1_BASE,
-		.virt_base	= OMAP1510_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
 		.rx_irq		= INT_McBSP1RX,
@@ -197,7 +169,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		},
 	{
 		.phys_base	= OMAP1510_MCBSP2_BASE,
-		.virt_base	= io_p2v(OMAP1510_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
 		.rx_irq		= INT_1510_SPI_RX,
@@ -206,7 +177,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP1510_MCBSP3_BASE,
-		.virt_base	= OMAP1510_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
 		.rx_irq		= INT_McBSP3RX,
@@ -225,7 +195,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP1610_MCBSP1_BASE,
-		.virt_base	= OMAP1610_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
 		.rx_irq		= INT_McBSP1RX,
@@ -235,7 +204,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP1610_MCBSP2_BASE,
-		.virt_base	= io_p2v(OMAP1610_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
 		.rx_irq		= INT_1610_McBSP2_RX,
@@ -244,7 +212,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP1610_MCBSP3_BASE,
-		.virt_base	= OMAP1610_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
 		.rx_irq		= INT_McBSP3RX,
@@ -271,6 +238,18 @@ int __init omap1_mcbsp_init(void)
 	}
 
 	if (cpu_is_omap730())
+		omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
+	if (cpu_is_omap15xx())
+		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
+	if (cpu_is_omap16xx())
+		omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ;
+
+	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
+								GFP_KERNEL);
+	if (!mcbsp_ptr)
+		return -ENOMEM;
+
+	if (cpu_is_omap730())
 		omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
 						OMAP730_MCBSP_PDATA_SZ);
 
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 898516e..062c905 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -24,10 +24,11 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
-#include <asm/system.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/spinlock.h>
 
+#include <asm/system.h>
+
 #include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 63c4ea1..770d256 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -41,8 +41,8 @@
 #include <linux/interrupt.h>
 #include <linux/sysfs.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 0e25a99..528691d5c 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -18,8 +18,8 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/mach-types.h>
 
 #include <mach/board.h>
@@ -67,8 +67,8 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART1_BASE),
-		.mapbase	= (unsigned long)OMAP_UART1_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.mapbase	= OMAP_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -76,8 +76,8 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART2_BASE),
-		.mapbase	= (unsigned long)OMAP_UART2_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.mapbase	= OMAP_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -85,8 +85,8 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART3_BASE),
-		.mapbase	= (unsigned long)OMAP_UART3_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.mapbase	= OMAP_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index e547085..2cf7e32 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -43,10 +43,10 @@
 #include <linux/err.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index e677601..705367e 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -44,10 +44,10 @@
 #include <linux/clk.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 7069c9d..4832fcc 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -15,8 +15,17 @@ config ARCH_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP24XX
 
+config ARCH_OMAP34XX
+	bool "OMAP34xx Based System"
+	depends on ARCH_OMAP3
+
+config ARCH_OMAP3430
+	bool "OMAP3430 support"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select ARCH_OMAP_OTG
+
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2
+	depends on ARCH_OMAP2 || ARCH_OMAP3
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
@@ -35,3 +44,14 @@ config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
+config MACH_OMAP3_BEAGLE
+	bool "OMAP3 BEAGLE board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_LDP
+	bool "OMAP3 LDP board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OVERO
+	bool "Gumstix Overo board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 93ee990..c693923 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,16 +4,21 @@
 
 # Common support
 obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
-		devices.o serial.o gpmc.o timer-gp.o
+		devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
+		clockdomain.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
+obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+ifeq ($(CONFIG_PM),y)
+obj-y					+= pm.o
+obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+endif
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
@@ -24,4 +29,7 @@ obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
+obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
+obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index b72ca13..24688ef 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -21,6 +21,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -34,8 +35,6 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 
-#include <asm/io.h>
-
 
 #define	SDP2430_FLASH_CS	0
 #define	SDP2430_SMC91X_CS	5
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 9e2624c..2fef2c8 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -18,9 +18,11 @@
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
 #include <linux/workqueue.h>
+#include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -41,8 +43,6 @@
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 
-#include <asm/io.h>
-
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1
 
@@ -392,6 +392,13 @@ static struct omap_board_config_kernel h4_config[] = {
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
+static struct i2c_board_info __initdata h4_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("isp1301_omap", 0x2d),
+		.irq		= OMAP_GPIO_IRQ(125),
+	},
+};
+
 static void __init omap_h4_init(void)
 {
 	/*
@@ -412,6 +419,9 @@ static void __init omap_h4_init(void)
 	}
 #endif
 
+	i2c_register_board_info(1, h4_i2c_board_info,
+			ARRAY_SIZE(h4_i2c_board_info));
+
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
 	omap_board_config = h4_config;
 	omap_board_config_size = ARRAY_SIZE(h4_config);
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
new file mode 100644
index 0000000..1ea59986
--- /dev/null
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -0,0 +1,86 @@
+/*
+ * linux/arch/arm/mach-omap2/board-ldp.c
+ *
+ * Copyright (C) 2008 Texas Instruments Inc.
+ * Nishant Kamat <nskamat@ti.com>
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-ldp.h>
+#include <mach/mcspi.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <mach/control.h>
+
+static void __init omap_ldp_init_irq(void)
+{
+	omap2_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct omap_uart_config ldp_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel ldp_config[] __initdata = {
+	{ OMAP_TAG_UART,	&ldp_uart_config },
+};
+
+static int __init omap_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, NULL, 0);
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static void __init omap_ldp_init(void)
+{
+	omap_i2c_init();
+	omap_board_config = ldp_config;
+	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	omap_serial_init();
+}
+
+static void __init omap_ldp_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_LDP, "OMAP LDP board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_ldp_map_io,
+	.init_irq	= omap_ldp_init_irq,
+	.init_machine	= omap_ldp_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
new file mode 100644
index 0000000..baa7967
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -0,0 +1,244 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3beagle.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/nand.h>
+
+
+#define GPMC_CS0_BASE  0x60
+#define GPMC_CS_SIZE   0x30
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition omap3beagle_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size		= 1 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data omap3beagle_nand_data = {
+	.options	= NAND_BUSWIDTH_16,
+	.parts		= omap3beagle_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(omap3beagle_nand_partitions),
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+	.nand_setup	= NULL,
+	.dev_ready	= NULL,
+};
+
+static struct resource omap3beagle_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device omap3beagle_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &omap3beagle_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &omap3beagle_nand_resource,
+};
+
+static struct omap_uart_config omap3_beagle_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static void __init omap3_beagle_init_irq(void)
+{
+	omap2_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct platform_device omap3_beagle_lcd_device = {
+	.name		= "omap3beagle_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "beagleboard::usr0",
+		.default_trigger	= "heartbeat",
+		.gpio			= 150,
+	},
+	{
+		.name			= "beagleboard::usr1",
+		.default_trigger	= "mmc0",
+		.gpio			= 149,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+		.code			= BTN_EXTRA,
+		.gpio			= 7,
+		.desc			= "user",
+		.wakeup			= 1,
+	},
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_key_info,
+	},
+};
+
+static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+	{ OMAP_TAG_UART,	&omap3_beagle_uart_config },
+	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
+};
+
+static struct platform_device *omap3_beagle_devices[] __initdata = {
+	&omap3_beagle_lcd_device,
+	&leds_gpio,
+	&keys_gpio,
+};
+
+static void __init omap3beagle_flash_init(void)
+{
+	u8 cs = 0;
+	u8 nandcs = GPMC_CS_NUM + 1;
+
+	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+	/* find out the chip-select on which NAND exists */
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		if ((ret & 0xC00) == 0x800) {
+			printk(KERN_INFO "Found NAND on CS%d\n", cs);
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+		}
+		cs++;
+	}
+
+	if (nandcs > GPMC_CS_NUM) {
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				 "in GPMC\n ");
+		return;
+	}
+
+	if (nandcs < GPMC_CS_NUM) {
+		omap3beagle_nand_data.cs = nandcs;
+		omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)
+			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+		omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
+
+		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+		if (platform_device_register(&omap3beagle_nand_device) < 0)
+			printk(KERN_ERR "Unable to register NAND device\n");
+	}
+}
+
+static void __init omap3_beagle_init(void)
+{
+	platform_add_devices(omap3_beagle_devices,
+			ARRAY_SIZE(omap3_beagle_devices));
+	omap_board_config = omap3_beagle_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+	omap_serial_init();
+	omap3beagle_flash_init();
+}
+
+static void __init omap3_beagle_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
+	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_beagle_map_io,
+	.init_irq	= omap3_beagle_init_irq,
+	.init_machine	= omap3_beagle_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
new file mode 100644
index 0000000..e09aa59
--- /dev/null
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -0,0 +1,242 @@
+/*
+ * board-overo.c (Gumstix Overo)
+ *
+ * Initial code: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-overo.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpio.h>
+#include <mach/gpmc.h>
+#include <mach/hardware.h>
+#include <mach/nand.h>
+
+#define NAND_BLOCK_SIZE SZ_128K
+#define GPMC_CS0_BASE  0x60
+#define GPMC_CS_SIZE   0x30
+
+static struct mtd_partition overo_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,			/* Offset = 0x00000 */
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	},
+	{
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size           = 14 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "uboot environment",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x240000 */
+		.size           = 2 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "linux",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size           = 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data overo_nand_data = {
+	.parts = overo_nand_partitions,
+	.nr_parts = ARRAY_SIZE(overo_nand_partitions),
+	.dma_channel = -1,	/* disable DMA in OMAP NAND driver */
+};
+
+static struct resource overo_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device overo_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &overo_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &overo_nand_resource,
+};
+
+
+static void __init overo_flash_init(void)
+{
+	u8 cs = 0;
+	u8 nandcs = GPMC_CS_NUM + 1;
+
+	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+	/* find out the chip-select on which NAND exists */
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		if ((ret & 0xC00) == 0x800) {
+			printk(KERN_INFO "Found NAND on CS%d\n", cs);
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+		}
+		cs++;
+	}
+
+	if (nandcs > GPMC_CS_NUM) {
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				 "in GPMC\n ");
+		return;
+	}
+
+	if (nandcs < GPMC_CS_NUM) {
+		overo_nand_data.cs = nandcs;
+		overo_nand_data.gpmc_cs_baseaddr = (void *)
+			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+		overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
+
+		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+		if (platform_device_register(&overo_nand_device) < 0)
+			printk(KERN_ERR "Unable to register NAND device\n");
+	}
+}
+static struct omap_uart_config overo_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static int __init overo_i2c_init(void)
+{
+	/* i2c2 pins are used for gpio */
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static void __init overo_init_irq(void)
+{
+	omap2_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct platform_device overo_lcd_device = {
+	.name		= "overo_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config overo_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel overo_config[] __initdata = {
+	{ OMAP_TAG_UART,	&overo_uart_config },
+	{ OMAP_TAG_LCD,		&overo_lcd_config },
+};
+
+static struct platform_device *overo_devices[] __initdata = {
+	&overo_lcd_device,
+};
+
+static void __init overo_init(void)
+{
+	overo_i2c_init();
+	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
+	omap_board_config = overo_config;
+	omap_board_config_size = ARRAY_SIZE(overo_config);
+	omap_serial_init();
+	overo_flash_init();
+
+	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
+			  "OVERO_GPIO_W2W_NRESET") == 0) &&
+	    (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) {
+		gpio_export(OVERO_GPIO_W2W_NRESET, 0);
+		gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
+		udelay(10);
+		gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
+	} else {
+		printk(KERN_ERR "could not obtain gpio for "
+					"OVERO_GPIO_W2W_NRESET\n");
+	}
+
+	if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) &&
+	    (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0))
+		gpio_export(OVERO_GPIO_BT_XGATE, 0);
+	else
+		printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n");
+
+	if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) &&
+	    (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) {
+		gpio_export(OVERO_GPIO_BT_NRESET, 0);
+		gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
+		mdelay(6);
+		gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
+	} else {
+		printk(KERN_ERR "could not obtain gpio for "
+					"OVERO_GPIO_BT_NRESET\n");
+	}
+
+	if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) &&
+	    (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0))
+		gpio_export(OVERO_GPIO_USBH_CPEN, 0);
+	else
+		printk(KERN_ERR "could not obtain gpio for "
+					"OVERO_GPIO_USBH_CPEN\n");
+
+	if ((gpio_request(OVERO_GPIO_USBH_NRESET,
+			  "OVERO_GPIO_USBH_NRESET") == 0) &&
+	    (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
+		gpio_export(OVERO_GPIO_USBH_NRESET, 0);
+	else
+		printk(KERN_ERR "could not obtain gpio for "
+					"OVERO_GPIO_USBH_NRESET\n");
+}
+
+static void __init overo_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OVERO, "Gumstix Overo")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= overo_map_io,
+	.init_irq	= overo_init_irq,
+	.init_machine	= overo_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 1d891e4..ad721e0 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -21,11 +21,11 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
-#include <asm/bitops.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
 
 #include <mach/clock.h>
+#include <mach/clockdomain.h>
 #include <mach/sram.h>
 #include <mach/cpu.h>
 #include <asm/div64.h>
@@ -62,10 +62,36 @@
 u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
- * Omap2 specific clock functions
+ * OMAP2/3 specific clock functions
  *-------------------------------------------------------------------------*/
 
 /**
+ * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
+ * @clk: OMAP clock struct ptr to use
+ *
+ * Convert a clockdomain name stored in a struct clk 'clk' into a
+ * clockdomain pointer, and save it into the struct clk.  Intended to be
+ * called during clk_register().  No return value.
+ */
+void omap2_init_clk_clkdm(struct clk *clk)
+{
+	struct clockdomain *clkdm;
+
+	if (!clk->clkdm_name)
+		return;
+
+	clkdm = clkdm_lookup(clk->clkdm_name);
+	if (clkdm) {
+		pr_debug("clock: associated clk %s to clkdm %s\n",
+			 clk->name, clk->clkdm_name);
+		clk->clkdm = clkdm;
+	} else {
+		pr_debug("clock: could not associate clk %s to "
+			 "clkdm %s\n", clk->name, clk->clkdm_name);
+	}
+}
+
+/**
  * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
  * @clk: OMAP clock struct ptr to use
  *
@@ -251,7 +277,7 @@ int _omap2_clk_enable(struct clk *clk)
 	if (clk->enable)
 		return clk->enable(clk);
 
-	if (unlikely(clk->enable_reg == 0)) {
+	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
 		return 0; /* REVISIT: -EINVAL */
@@ -283,7 +309,7 @@ void _omap2_clk_disable(struct clk *clk)
 		return;
 	}
 
-	if (clk->enable_reg == 0) {
+	if (clk->enable_reg == NULL) {
 		/*
 		 * 'Independent' here refers to a clock which is not
 		 * controlled by its parent.
@@ -308,6 +334,9 @@ void omap2_clk_disable(struct clk *clk)
 		_omap2_clk_disable(clk);
 		if (likely((u32)clk->parent))
 			omap2_clk_disable(clk->parent);
+		if (clk->clkdm)
+			omap2_clkdm_clk_disable(clk->clkdm, clk);
+
 	}
 }
 
@@ -324,11 +353,19 @@ int omap2_clk_enable(struct clk *clk)
 			return ret;
 		}
 
+		if (clk->clkdm)
+			omap2_clkdm_clk_enable(clk->clkdm, clk);
+
 		ret = _omap2_clk_enable(clk);
 
-		if (unlikely(ret != 0) && clk->parent) {
-			omap2_clk_disable(clk->parent);
-			clk->usecount--;
+		if (unlikely(ret != 0)) {
+			if (clk->clkdm)
+				omap2_clkdm_clk_disable(clk->clkdm, clk);
+
+			if (clk->parent) {
+				omap2_clk_disable(clk->parent);
+				clk->usecount--;
+			}
 		}
 	}
 
@@ -477,7 +514,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
 /* Given a clock and a rate apply a clock specific rounding function */
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	if (clk->round_rate != 0)
+	if (clk->round_rate != NULL)
 		return clk->round_rate(clk, rate);
 
 	if (clk->flags & RATE_FIXED)
@@ -566,7 +603,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
  */
 void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
 {
-	if (unlikely((clk->clksel_reg == 0) || (clk->clksel_mask == 0)))
+	if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL)))
 		return NULL;
 
 	*field_mask = clk->clksel_mask;
@@ -586,7 +623,7 @@ u32 omap2_clksel_get_divisor(struct clk *clk)
 	void __iomem *div_addr;
 
 	div_addr = omap2_get_clksel(clk, &field_mask);
-	if (div_addr == 0)
+	if (div_addr == NULL)
 		return 0;
 
 	field_val = __raw_readl(div_addr) & field_mask;
@@ -605,7 +642,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	div_addr = omap2_get_clksel(clk, &field_mask);
-	if (div_addr == 0)
+	if (div_addr == NULL)
 		return -EINVAL;
 
 	field_val = omap2_divisor_to_clksel(clk, new_div);
@@ -643,7 +680,7 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
-	if (clk->set_rate != 0)
+	if (clk->set_rate != NULL)
 		ret = clk->set_rate(clk, rate);
 
 	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
@@ -664,7 +701,7 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
 	const struct clksel_rate *clkr;
 
 	*parent_div = 0;
-	*src_addr = 0;
+	*src_addr = NULL;
 
 	clks = omap2_get_clksel_by_parent(clk, src_clk);
 	if (clks == NULL)
@@ -705,7 +742,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 
 	field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
 					       &field_mask, clk, &parent_div);
-	if (src_addr == 0)
+	if (src_addr == NULL)
 		return -EINVAL;
 
 	if (clk->usecount > 0)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 626e5fa..1fb330e 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,7 @@
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
 
+int omap2_clk_init(void);
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
@@ -36,6 +37,7 @@ void omap2_clk_disable_unused(struct clk *clk);
 #endif
 
 void omap2_clksel_recalc(struct clk *clk);
+void omap2_init_clk_clkdm(struct clk *clk);
 void omap2_init_clksel_parent(struct clk *clk);
 u32 omap2_clksel_get_divisor(struct clk *clk);
 u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 295e671..d382eb0 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -24,14 +24,13 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
-
 #include <linux/io.h>
 #include <linux/cpufreq.h>
+#include <linux/bitops.h>
 
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
-#include <asm/bitops.h>
 
 #include "memory.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index be4e255..242a19d 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -626,6 +626,7 @@ static struct clk func_32k_ck = {
 	.rate		= 32000,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &propagate_rate,
 };
 
@@ -634,17 +635,19 @@ static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
 	.name		= "osc_ck",
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES,
+	.clkdm_name	= "wkup_clkdm",
 	.enable		= &omap2_enable_osc_ck,
 	.disable	= &omap2_disable_osc_ck,
 	.recalc		= &omap2_osc_clk_recalc,
 };
 
-/* With out modem likely 12MHz, with modem likely 13MHz */
+/* Without modem likely 12MHz, with modem likely 13MHz */
 static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
 	.name		= "sys_ck",		/* ~ ref_clk also */
 	.parent		= &osc_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				ALWAYS_ENABLED | RATE_PROPAGATES,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_sys_clk_recalc,
 };
 
@@ -653,6 +656,7 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.rate		= 54000000,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &propagate_rate,
 };
 
@@ -684,6 +688,7 @@ static struct clk dpll_ck = {
 	.dpll_data	= &dpll_dd,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES | ALWAYS_ENABLED,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_dpllcore_recalc,
 	.set_rate	= &omap2_reprogram_dpllcore,
 };
@@ -694,6 +699,7 @@ static struct clk apll96_ck = {
 	.rate		= 96000000,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
 	.enable		= &omap2_clk_fixed_enable,
@@ -707,6 +713,7 @@ static struct clk apll54_ck = {
 	.rate		= 54000000,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
 	.enable		= &omap2_clk_fixed_enable,
@@ -741,6 +748,7 @@ static struct clk func_54m_ck = {
 	.parent		= &apll54_ck,	/* can also be alt_clk */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_54M_SOURCE,
@@ -753,6 +761,7 @@ static struct clk core_ck = {
 	.parent		= &dpll_ck,		/* can also be 32k */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				ALWAYS_ENABLED | RATE_PROPAGATES,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -779,6 +788,7 @@ static struct clk func_96m_ck = {
 	.parent		= &apll96_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP2430_96M_SOURCE,
@@ -811,6 +821,7 @@ static struct clk func_48m_ck = {
 	.parent		= &apll96_ck,	 /* 96M or Alt */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_48M_SOURCE,
@@ -826,6 +837,7 @@ static struct clk func_12m_ck = {
 	.fixed_div	= 4,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
 
@@ -878,6 +890,7 @@ static struct clk sys_clkout_src = {
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES,
+	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -908,6 +921,7 @@ static struct clk sys_clkout = {
 	.parent		= &sys_clkout_src,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "wkup_clkdm",
 	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
 	.clksel		= sys_clkout_clksel,
@@ -921,6 +935,7 @@ static struct clk sys_clkout2_src = {
 	.name		= "sys_clkout2_src",
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X | RATE_PROPAGATES,
+	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -942,6 +957,7 @@ static struct clk sys_clkout2 = {
 	.name		= "sys_clkout2",
 	.parent		= &sys_clkout2_src,
 	.flags		= CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "wkup_clkdm",
 	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
 	.clksel		= sys_clkout2_clksel,
@@ -954,6 +970,7 @@ static struct clk emul_ck = {
 	.name		= "emul_ck",
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKEMUL_CTRL,
 	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -990,12 +1007,13 @@ static struct clk mpu_ck = {	/* Control cpu */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				ALWAYS_ENABLED | DELAYED_APP |
 				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.clkdm_name	= "mpu_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP24XX_CLKSEL_MPU_MASK,
 	.clksel		= mpu_clksel,
 	.recalc		= &omap2_clksel_recalc,
-	.round_rate     = &omap2_clksel_round_rate,
+	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate
 };
 
@@ -1031,6 +1049,7 @@ static struct clk dsp_fck = {
 	.parent		= &core_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
 				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.clkdm_name	= "dsp_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
@@ -1054,10 +1073,7 @@ static const struct clksel dsp_irate_ick_clksel[] = {
 	{ .parent = NULL }
 };
 
-/*
- * This clock does not exist as such in the TRM, but is added to
- * separate source selection from  XXX
- */
+/* This clock does not exist as such in the TRM. */
 static struct clk dsp_irate_ick = {
 	.name		= "dsp_irate_ick",
 	.parent		= &dsp_fck,
@@ -1089,11 +1105,17 @@ static struct clk iva2_1_ick = {
 	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
 };
 
+/*
+ * The IVA1 is an ARM7 core on the 2420 that has nothing to do with
+ * the C54x, but which is contained in the DSP powerdomain.  Does not
+ * exist on later OMAPs.
+ */
 static struct clk iva1_ifck = {
 	.name		= "iva1_ifck",
 	.parent		= &core_ck,
 	.flags		= CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
 				RATE_PROPAGATES | DELAYED_APP,
+	.clkdm_name	= "iva1_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
@@ -1109,6 +1131,7 @@ static struct clk iva1_mpu_int_ifck = {
 	.name		= "iva1_mpu_int_ifck",
 	.parent		= &iva1_ifck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "iva1_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP2420_EN_IVA_MPU_SHIFT,
 	.fixed_div	= 2,
@@ -1156,6 +1179,7 @@ static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				ALWAYS_ENABLED | DELAYED_APP |
 				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.clkdm_name	= "core_l3_clkdm",
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
 	.clksel		= core_l3_clksel,
@@ -1177,11 +1201,13 @@ static const struct clksel usb_l4_ick_clksel[] = {
 	{ .parent = NULL },
 };
 
+/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
 static struct clk usb_l4_ick = {	/* FS-USB interface clock */
 	.name		= "usb_l4_ick",
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				DELAYED_APP | CONFIG_PARTICIPANT,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
@@ -1193,10 +1219,42 @@ static struct clk usb_l4_ick = {	/* FS-USB interface clock */
 };
 
 /*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks.	Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static const struct clksel_rate l4_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel l4_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ck = {		/* used both as an ick and fck */
+	.name		= "l4_ck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
+	.clkdm_name	= "core_l4_clkdm",
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
+	.clksel		= l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/*
  * SSI is in L3 management domain, its direct parent is core not l3,
  * many core power domain entities are grouped into the L3 clock
  * domain.
- * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK
  *
  * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
  */
@@ -1221,6 +1279,7 @@ static struct clk ssi_ssr_sst_fck = {
 	.parent		= &core_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				DELAYED_APP,
+	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
@@ -1231,6 +1290,7 @@ static struct clk ssi_ssr_sst_fck = {
 	.set_rate	= &omap2_clksel_set_rate
 };
 
+
 /*
  * GFX clock domain
  *	Clocks:
@@ -1254,6 +1314,7 @@ static struct clk gfx_3d_fck = {
 	.name		= "gfx_3d_fck",
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "gfx_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
@@ -1268,6 +1329,7 @@ static struct clk gfx_2d_fck = {
 	.name		= "gfx_2d_fck",
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "gfx_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
@@ -1282,6 +1344,7 @@ static struct clk gfx_ick = {
 	.name		= "gfx_ick",		/* From l3 */
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "gfx_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP_EN_GFX_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1311,6 +1374,7 @@ static struct clk mdm_ick = {		/* used both as a ick and fck */
 	.name		= "mdm_ick",
 	.parent		= &core_ck,
 	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.clkdm_name	= "mdm_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
@@ -1325,52 +1389,13 @@ static struct clk mdm_osc_ck = {
 	.name		= "mdm_osc_ck",
 	.parent		= &osc_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "mdm_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP2430_EN_OSC_SHIFT,
 	.recalc		= &followparent_recalc,
 };
 
 /*
- * L4 clock management domain
- *
- * This domain contains lots of interface clocks from the L4 interface, some
- * functional clocks.	Fixed APLL functional source clocks are managed in
- * this domain.
- */
-static const struct clksel_rate l4_core_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel l4_clksel[] = {
-	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l4_ck = {		/* used both as an ick and fck */
-	.name		= "l4_ck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
-	.clksel		= l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
  * DSS clock domain
  * CLOCKs:
  * DSS_L4_ICLK, DSS_L3_ICLK,
@@ -1409,6 +1434,7 @@ static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
 	.name		= "dss_ick",
 	.parent		= &l4_ck,	/* really both l3 and l4 */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1419,6 +1445,7 @@ static struct clk dss1_fck = {
 	.parent		= &core_ck,		/* Core or sys */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				DELAYED_APP,
+	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1451,6 +1478,7 @@ static struct clk dss2_fck = {		/* Alt clk used in power management */
 	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				DELAYED_APP,
+	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1464,6 +1492,7 @@ static struct clk dss_54m_fck = {	/* Alt clk used in power management */
 	.name		= "dss_54m_fck",	/* 54m tv clk */
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1491,6 +1520,7 @@ static struct clk gpt1_ick = {
 	.name		= "gpt1_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1500,6 +1530,7 @@ static struct clk gpt1_fck = {
 	.name		= "gpt1_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1515,6 +1546,7 @@ static struct clk gpt2_ick = {
 	.name		= "gpt2_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1524,6 +1556,7 @@ static struct clk gpt2_fck = {
 	.name		= "gpt2_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1537,6 +1570,7 @@ static struct clk gpt3_ick = {
 	.name		= "gpt3_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1546,6 +1580,7 @@ static struct clk gpt3_fck = {
 	.name		= "gpt3_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1559,6 +1594,7 @@ static struct clk gpt4_ick = {
 	.name		= "gpt4_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1568,6 +1604,7 @@ static struct clk gpt4_fck = {
 	.name		= "gpt4_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1581,6 +1618,7 @@ static struct clk gpt5_ick = {
 	.name		= "gpt5_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1590,6 +1628,7 @@ static struct clk gpt5_fck = {
 	.name		= "gpt5_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1603,6 +1642,7 @@ static struct clk gpt6_ick = {
 	.name		= "gpt6_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1612,6 +1652,7 @@ static struct clk gpt6_fck = {
 	.name		= "gpt6_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1634,6 +1675,7 @@ static struct clk gpt7_fck = {
 	.name		= "gpt7_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1647,6 +1689,7 @@ static struct clk gpt8_ick = {
 	.name		= "gpt8_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1656,6 +1699,7 @@ static struct clk gpt8_fck = {
 	.name		= "gpt8_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1669,6 +1713,7 @@ static struct clk gpt9_ick = {
 	.name		= "gpt9_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1678,6 +1723,7 @@ static struct clk gpt9_fck = {
 	.name		= "gpt9_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1691,6 +1737,7 @@ static struct clk gpt10_ick = {
 	.name		= "gpt10_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1700,6 +1747,7 @@ static struct clk gpt10_fck = {
 	.name		= "gpt10_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1713,6 +1761,7 @@ static struct clk gpt11_ick = {
 	.name		= "gpt11_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1722,6 +1771,7 @@ static struct clk gpt11_fck = {
 	.name		= "gpt11_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1735,6 +1785,7 @@ static struct clk gpt12_ick = {
 	.name		= "gpt12_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1744,6 +1795,7 @@ static struct clk gpt12_fck = {
 	.name		= "gpt12_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -1758,6 +1810,7 @@ static struct clk mcbsp1_ick = {
 	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1768,6 +1821,7 @@ static struct clk mcbsp1_fck = {
 	.id		= 1,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1778,6 +1832,7 @@ static struct clk mcbsp2_ick = {
 	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1788,6 +1843,7 @@ static struct clk mcbsp2_fck = {
 	.id		= 2,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1798,6 +1854,7 @@ static struct clk mcbsp3_ick = {
 	.id		= 3,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1808,6 +1865,7 @@ static struct clk mcbsp3_fck = {
 	.id		= 3,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1818,6 +1876,7 @@ static struct clk mcbsp4_ick = {
 	.id		= 4,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1828,6 +1887,7 @@ static struct clk mcbsp4_fck = {
 	.id		= 4,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1838,6 +1898,7 @@ static struct clk mcbsp5_ick = {
 	.id		= 5,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1848,6 +1909,7 @@ static struct clk mcbsp5_fck = {
 	.id		= 5,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1857,6 +1919,7 @@ static struct clk mcspi1_ick = {
 	.name		= "mcspi_ick",
 	.id		= 1,
 	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
@@ -1868,6 +1931,7 @@ static struct clk mcspi1_fck = {
 	.id		= 1,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1878,6 +1942,7 @@ static struct clk mcspi2_ick = {
 	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1888,6 +1953,7 @@ static struct clk mcspi2_fck = {
 	.id		= 2,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1898,6 +1964,7 @@ static struct clk mcspi3_ick = {
 	.id		= 3,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1908,6 +1975,7 @@ static struct clk mcspi3_fck = {
 	.id		= 3,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1917,6 +1985,7 @@ static struct clk uart1_ick = {
 	.name		= "uart1_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1926,6 +1995,7 @@ static struct clk uart1_fck = {
 	.name		= "uart1_fck",
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1935,6 +2005,7 @@ static struct clk uart2_ick = {
 	.name		= "uart2_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1944,6 +2015,7 @@ static struct clk uart2_fck = {
 	.name		= "uart2_fck",
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1953,6 +2025,7 @@ static struct clk uart3_ick = {
 	.name		= "uart3_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1962,6 +2035,7 @@ static struct clk uart3_fck = {
 	.name		= "uart3_fck",
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1971,6 +2045,7 @@ static struct clk gpios_ick = {
 	.name		= "gpios_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1980,6 +2055,7 @@ static struct clk gpios_fck = {
 	.name		= "gpios_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1989,6 +2065,7 @@ static struct clk mpu_wdt_ick = {
 	.name		= "mpu_wdt_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1998,6 +2075,7 @@ static struct clk mpu_wdt_fck = {
 	.name		= "mpu_wdt_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2006,31 +2084,40 @@ static struct clk mpu_wdt_fck = {
 static struct clk sync_32k_ick = {
 	.name		= "sync_32k_ick",
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
 	.recalc		= &followparent_recalc,
 };
+
 static struct clk wdt1_ick = {
 	.name		= "wdt1_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
 	.recalc		= &followparent_recalc,
 };
+
 static struct clk omapctrl_ick = {
 	.name		= "omapctrl_ick",
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
 	.recalc		= &followparent_recalc,
 };
+
 static struct clk icr_ick = {
 	.name		= "icr_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP2430_EN_ICR_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2040,15 +2127,22 @@ static struct clk cam_ick = {
 	.name		= "cam_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
 	.recalc		= &followparent_recalc,
 };
 
+/*
+ * cam_fck controls both CAM_MCLK and CAM_FCLK.  It should probably be
+ * split into two separate clocks, since the parent clocks are different
+ * and the clockdomains are also different.
+ */
 static struct clk cam_fck = {
 	.name		= "cam_fck",
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2058,6 +2152,7 @@ static struct clk mailboxes_ick = {
 	.name		= "mailboxes_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2067,6 +2162,7 @@ static struct clk wdt4_ick = {
 	.name		= "wdt4_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2076,6 +2172,7 @@ static struct clk wdt4_fck = {
 	.name		= "wdt4_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2085,6 +2182,7 @@ static struct clk wdt3_ick = {
 	.name		= "wdt3_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2094,6 +2192,7 @@ static struct clk wdt3_fck = {
 	.name		= "wdt3_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2103,6 +2202,7 @@ static struct clk mspro_ick = {
 	.name		= "mspro_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2112,6 +2212,7 @@ static struct clk mspro_fck = {
 	.name		= "mspro_fck",
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2121,6 +2222,7 @@ static struct clk mmc_ick = {
 	.name		= "mmc_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2130,6 +2232,7 @@ static struct clk mmc_fck = {
 	.name		= "mmc_fck",
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2139,6 +2242,7 @@ static struct clk fac_ick = {
 	.name		= "fac_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2148,6 +2252,7 @@ static struct clk fac_fck = {
 	.name		= "fac_fck",
 	.parent		= &func_12m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2157,6 +2262,7 @@ static struct clk eac_ick = {
 	.name		= "eac_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2166,6 +2272,7 @@ static struct clk eac_fck = {
 	.name		= "eac_fck",
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2175,6 +2282,7 @@ static struct clk hdq_ick = {
 	.name		= "hdq_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2184,6 +2292,7 @@ static struct clk hdq_fck = {
 	.name		= "hdq_fck",
 	.parent		= &func_12m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2194,6 +2303,7 @@ static struct clk i2c2_ick = {
 	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2204,6 +2314,7 @@ static struct clk i2c2_fck = {
 	.id		= 2,
 	.parent		= &func_12m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2214,6 +2325,7 @@ static struct clk i2chs2_fck = {
 	.id		= 2,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_I2CHS2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2224,6 +2336,7 @@ static struct clk i2c1_ick = {
 	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2234,6 +2347,7 @@ static struct clk i2c1_fck = {
 	.id		= 1,
 	.parent		= &func_12m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2244,6 +2358,7 @@ static struct clk i2chs1_fck = {
 	.id		= 1,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_I2CHS1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2252,7 +2367,9 @@ static struct clk i2chs1_fck = {
 static struct clk gpmc_fck = {
 	.name		= "gpmc_fck",
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ENABLE_ON_INIT,
+	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2260,6 +2377,7 @@ static struct clk sdma_fck = {
 	.name		= "sdma_fck",
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2267,6 +2385,7 @@ static struct clk sdma_ick = {
 	.name		= "sdma_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2274,6 +2393,7 @@ static struct clk vlynq_ick = {
 	.name		= "vlynq_ick",
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2308,6 +2428,7 @@ static struct clk vlynq_fck = {
 	.name		= "vlynq_fck",
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP,
+	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
 	.init		= &omap2_init_clksel_parent,
@@ -2323,6 +2444,7 @@ static struct clk sdrc_ick = {
 	.name		= "sdrc_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
 	.enable_bit	= OMAP2430_EN_SDRC_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2332,6 +2454,7 @@ static struct clk des_ick = {
 	.name		= "des_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2341,6 +2464,7 @@ static struct clk sha_ick = {
 	.name		= "sha_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2350,6 +2474,7 @@ static struct clk rng_ick = {
 	.name		= "rng_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2359,6 +2484,7 @@ static struct clk aes_ick = {
 	.name		= "aes_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2368,6 +2494,7 @@ static struct clk pka_ick = {
 	.name		= "pka_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2377,6 +2504,7 @@ static struct clk usb_fck = {
 	.name		= "usb_fck",
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2386,6 +2514,7 @@ static struct clk usbhs_ick = {
 	.name		= "usbhs_ick",
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_USBHS_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2396,6 +2525,7 @@ static struct clk mmchs1_ick = {
 	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2406,6 +2536,7 @@ static struct clk mmchs1_fck = {
 	.id		= 1,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2416,6 +2547,7 @@ static struct clk mmchs2_ick = {
 	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2435,6 +2567,7 @@ static struct clk gpio5_ick = {
 	.name		= "gpio5_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2444,6 +2577,7 @@ static struct clk gpio5_fck = {
 	.name		= "gpio5_fck",
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2453,6 +2587,7 @@ static struct clk mdm_intc_ick = {
 	.name		= "mdm_intc_ick",
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MDM_INTC_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2463,6 +2598,7 @@ static struct clk mmchsdb1_fck = {
 	.id		= 1,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHSDB1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2473,6 +2609,7 @@ static struct clk mmchsdb2_fck = {
 	.id		= 2,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP243X,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHSDB2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2551,7 +2688,6 @@ static struct clk *onchip_24xx_clks[] __initdata = {
 	&usb_l4_ick,
 	/* L4 domain clocks */
 	&l4_ck,			/* used as both core_l4 and wu_l4 */
-	&ssi_l4_ick,
 	/* virtual meta-group clock */
 	&virt_prcm_set,
 	/* general l4 interface ck, multi-parent functional clk */
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 3ff7495..084e110 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -25,11 +25,11 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/limits.h>
+#include <linux/bitops.h>
 
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
-#include <asm/bitops.h>
 
 #include "memory.h"
 #include "clock.h"
@@ -62,11 +62,14 @@ static void omap3_dpll_recalc(struct clk *clk)
 static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
 {
 	const struct dpll_data *dd;
+	u32 v;
 
 	dd = clk->dpll_data;
 
-	cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask),
-			dd->control_reg);
+	v = __raw_readl(dd->control_reg);
+	v &= ~dd->enable_mask;
+	v |= clken_bits << __ffs(dd->enable_mask);
+	__raw_writel(v, dd->control_reg);
 }
 
 /* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
@@ -82,7 +85,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	state <<= dd->idlest_bit;
 	idlest_mask = 1 << dd->idlest_bit;
 
-	while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) &&
+	while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
 	       i < MAX_DPLL_WAIT_TRIES) {
 		i++;
 		udelay(1);
@@ -285,7 +288,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk)
 
 	dd = clk->dpll_data;
 
-	v = cm_read_reg(dd->autoidle_reg);
+	v = __raw_readl(dd->autoidle_reg);
 	v &= dd->autoidle_mask;
 	v >>= __ffs(dd->autoidle_mask);
 
@@ -304,6 +307,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk)
 static void omap3_dpll_allow_idle(struct clk *clk)
 {
 	const struct dpll_data *dd;
+	u32 v;
 
 	if (!clk || !clk->dpll_data)
 		return;
@@ -315,9 +319,10 @@ static void omap3_dpll_allow_idle(struct clk *clk)
 	 * by writing 0x5 instead of 0x1.  Add some mechanism to
 	 * optionally enter this mode.
 	 */
-	cm_rmw_reg_bits(dd->autoidle_mask,
-			DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask),
-			dd->autoidle_reg);
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
 }
 
 /**
@@ -329,15 +334,17 @@ static void omap3_dpll_allow_idle(struct clk *clk)
 static void omap3_dpll_deny_idle(struct clk *clk)
 {
 	const struct dpll_data *dd;
+	u32 v;
 
 	if (!clk || !clk->dpll_data)
 		return;
 
 	dd = clk->dpll_data;
 
-	cm_rmw_reg_bits(dd->autoidle_mask,
-			DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask),
-			dd->autoidle_reg);
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
 }
 
 /* Clock control for DPLL outputs */
@@ -482,8 +489,10 @@ int __init omap2_clk_init(void)
 	for (clkp = onchip_34xx_clks;
 	     clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
 	     clkp++) {
-		if ((*clkp)->flags & cpu_clkflg)
+		if ((*clkp)->flags & cpu_clkflg) {
 			clk_register(*clkp);
+			omap2_init_clk_clkdm(*clkp);
+		}
 	}
 
 	/* REVISIT: Not yet ready for OMAP3 */
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index ec66445..c38a8a0 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -478,7 +478,7 @@ static struct clk dpll3_m2_ck = {
 };
 
 static const struct clksel core_ck_clksel[] = {
-	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
 	{ .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -495,7 +495,7 @@ static struct clk core_ck = {
 };
 
 static const struct clksel dpll3_m2x2_ck_clksel[] = {
-	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
 	{ .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -541,7 +541,7 @@ static struct clk dpll3_m3x2_ck = {
 };
 
 static const struct clksel emu_core_alwon_ck_clksel[] = {
-	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
 	{ .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -633,7 +633,7 @@ static struct clk dpll4_m2x2_ck = {
 };
 
 static const struct clksel omap_96m_alwon_fck_clksel[] = {
-	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
 	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -659,7 +659,7 @@ static struct clk omap_96m_fck = {
 };
 
 static const struct clksel cm_96m_fck_clksel[] = {
-	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
 	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -701,7 +701,7 @@ static struct clk dpll4_m3x2_ck = {
 };
 
 static const struct clksel virt_omap_54m_fck_clksel[] = {
-	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
 	{ .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -911,7 +911,7 @@ static struct clk dpll5_m2_ck = {
 };
 
 static const struct clksel omap_120m_fck_clksel[] = {
-	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
 	{ .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -919,13 +919,13 @@ static const struct clksel omap_120m_fck_clksel[] = {
 static struct clk omap_120m_fck = {
 	.name		= "omap_120m_fck",
 	.parent		= &dpll5_m2_ck,
-	.init           = &omap2_init_clksel_parent,
-	.clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
-	.clksel_mask    = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
-	.clksel         = omap_120m_fck_clksel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+	.clksel_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
+	.clksel		= omap_120m_fck_clksel,
 	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
-	.recalc         = &omap2_clksel_recalc,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 /* CM EXTERNAL CLOCK OUTPUTS */
@@ -1034,7 +1034,7 @@ static struct clk dpll1_fck = {
  * called 'dpll1_fck'
  */
 static const struct clksel mpu_clksel[] = {
-	{ .parent = &dpll1_fck,     .rates = dpll_bypass_rates },
+	{ .parent = &dpll1_fck,	    .rates = dpll_bypass_rates },
 	{ .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -1048,6 +1048,7 @@ static struct clk mpu_ck = {
 	.clksel		= mpu_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "mpu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1075,6 +1076,8 @@ static struct clk arm_fck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
+/* XXX What about neon_clkdm ? */
+
 /*
  * REVISIT: This clock is never specifically defined in the 3430 TRM,
  * although it is referenced - so this is a guess
@@ -1107,7 +1110,7 @@ static struct clk dpll2_fck = {
  */
 
 static const struct clksel iva2_clksel[] = {
-	{ .parent = &dpll2_fck,   .rates = dpll_bypass_rates },
+	{ .parent = &dpll2_fck,	  .rates = dpll_bypass_rates },
 	{ .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -1123,6 +1126,7 @@ static struct clk iva2_ck = {
 	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
 	.clksel		= iva2_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.clkdm_name	= "iva2_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1137,6 +1141,7 @@ static struct clk l3_ick = {
 	.clksel		= div2_core_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1154,6 +1159,7 @@ static struct clk l4_ick = {
 	.clksel		= div2_l3_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 
 };
@@ -1183,43 +1189,57 @@ static const struct clksel gfx_l3_clksel[] = {
 	{ .parent = NULL }
 };
 
-static struct clk gfx_l3_fck = {
-	.name		= "gfx_l3_fck",
+/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
+static struct clk gfx_l3_ck = {
+	.name		= "gfx_l3_ck",
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_l3_fck = {
+	.name		= "gfx_l3_fck",
+	.parent		= &gfx_l3_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
 	.clksel		= gfx_l3_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES,
+	.flags		= CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gfx_l3_ick = {
 	.name		= "gfx_l3_ick",
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP_EN_GFX_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
+	.parent		= &gfx_l3_ck,
+	.flags		= CLOCK_IN_OMAP3430ES1 | PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gfx_cg1_ck = {
 	.name		= "gfx_cg1_ck",
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES1,
+	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gfx_cg2_ck = {
 	.name		= "gfx_cg2_ck",
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES1,
+	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1252,15 +1272,18 @@ static struct clk sgx_fck = {
 	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
 	.clksel		= sgx_clksel,
 	.flags		= CLOCK_IN_OMAP3430ES2,
+	.clkdm_name	= "sgx_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk sgx_ick = {
 	.name		= "sgx_ick",
 	.parent		= &l3_ick,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES2,
+	.clkdm_name	= "sgx_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1269,9 +1292,11 @@ static struct clk sgx_ick = {
 static struct clk d2d_26m_fck = {
 	.name		= "d2d_26m_fck",
 	.parent		= &sys_ck,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES1,
+	.clkdm_name	= "d2d_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1291,6 +1316,7 @@ static struct clk gpt10_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1304,6 +1330,7 @@ static struct clk gpt11_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1341,6 +1368,7 @@ static struct clk core_96m_fck = {
 	.parent		= &omap_96m_fck,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1351,6 +1379,7 @@ static struct clk mmchs3_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES2,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1361,6 +1390,7 @@ static struct clk mmchs2_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1370,6 +1400,7 @@ static struct clk mspro_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1380,6 +1411,7 @@ static struct clk mmchs1_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1390,16 +1422,18 @@ static struct clk i2c3_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk i2c2_fck = {
 	.name		= "i2c_fck",
-	.id 		= 2,
+	.id		= 2,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1410,6 +1444,7 @@ static struct clk i2c1_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1443,6 +1478,7 @@ static struct clk mcbsp5_fck = {
 	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
 	.clksel		= mcbsp_15_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1456,6 +1492,7 @@ static struct clk mcbsp1_fck = {
 	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
 	.clksel		= mcbsp_15_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1466,6 +1503,7 @@ static struct clk core_48m_fck = {
 	.parent		= &omap_48m_fck,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1543,6 +1581,7 @@ static struct clk core_12m_fck = {
 	.parent		= &omap_12m_fck,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1581,6 +1620,7 @@ static struct clk ssi_ssr_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
 	.clksel		= ssi_ssr_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1596,11 +1636,17 @@ static struct clk ssi_sst_fck = {
 
 /* CORE_L3_ICK based clocks */
 
+/*
+ * XXX must add clk_enable/clk_disable for these if standard code won't
+ * handle it
+ */
 static struct clk core_l3_ick = {
 	.name		= "core_l3_ick",
 	.parent		= &l3_ick,
+	.init		= &omap2_init_clk_clkdm,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1610,6 +1656,7 @@ static struct clk hsotgusb_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1619,6 +1666,7 @@ static struct clk sdrc_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1627,6 +1675,7 @@ static struct clk gpmc_fck = {
 	.parent		= &core_l3_ick,
 	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK |
 				ENABLE_ON_INIT,
+	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1654,8 +1703,10 @@ static struct clk pka_ick = {
 static struct clk core_l4_ick = {
 	.name		= "core_l4_ick",
 	.parent		= &l4_ick,
+	.init		= &omap2_init_clk_clkdm,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1665,6 +1716,7 @@ static struct clk usbtll_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES2,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1675,6 +1727,7 @@ static struct clk mmchs3_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES2,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1685,6 +1738,7 @@ static struct clk icr_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1694,6 +1748,7 @@ static struct clk aes2_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1703,6 +1758,7 @@ static struct clk sha12_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1712,6 +1768,7 @@ static struct clk des2_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1722,6 +1779,7 @@ static struct clk mmchs2_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1732,6 +1790,7 @@ static struct clk mmchs1_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1741,6 +1800,7 @@ static struct clk mspro_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1750,6 +1810,7 @@ static struct clk hdq_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1760,6 +1821,7 @@ static struct clk mcspi4_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1770,6 +1832,7 @@ static struct clk mcspi3_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1780,6 +1843,7 @@ static struct clk mcspi2_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1790,6 +1854,7 @@ static struct clk mcspi1_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1800,6 +1865,7 @@ static struct clk i2c3_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1810,6 +1876,7 @@ static struct clk i2c2_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1820,6 +1887,7 @@ static struct clk i2c1_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1829,6 +1897,7 @@ static struct clk uart2_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1838,6 +1907,7 @@ static struct clk uart1_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1847,6 +1917,7 @@ static struct clk gpt11_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1856,6 +1927,7 @@ static struct clk gpt10_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1866,6 +1938,7 @@ static struct clk mcbsp5_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1876,6 +1949,7 @@ static struct clk mcbsp1_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1885,6 +1959,7 @@ static struct clk fac_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES1,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1894,6 +1969,7 @@ static struct clk mailboxes_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1913,6 +1989,7 @@ static struct clk ssi_l4_ick = {
 	.parent		= &l4_ick,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1922,6 +1999,7 @@ static struct clk ssi_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1996,7 +2074,7 @@ static struct clk des1_ick = {
 
 /* DSS */
 static const struct clksel dss1_alwon_fck_clksel[] = {
-	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
 	{ .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -2011,33 +2089,40 @@ static struct clk dss1_alwon_fck = {
 	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= dss1_alwon_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "dss_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
 	.parent		= &omap_54m_fck,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk dss_96m_fck = {
 	.name		= "dss_96m_fck",
 	.parent		= &omap_96m_fck,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk dss2_alwon_fck = {
 	.name		= "dss2_alwon_fck",
 	.parent		= &sys_ck,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2045,16 +2130,18 @@ static struct clk dss_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "dss_ick",
 	.parent		= &l4_ick,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 /* CAM */
 
 static const struct clksel cam_mclk_clksel[] = {
-	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
 	{ .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
 	{ .parent = NULL }
 };
@@ -2069,24 +2156,19 @@ static struct clk cam_mclk = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "cam_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static struct clk cam_l3_ick = {
-	.name		= "cam_l3_ick",
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cam_l4_ick = {
-	.name		= "cam_l4_ick",
+static struct clk cam_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "cam_ick",
 	.parent		= &l4_ick,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "cam_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2095,45 +2177,45 @@ static struct clk cam_l4_ick = {
 static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
 	.parent		= &omap_120m_fck,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES2,
+	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk usbhost_48m_fck = {
 	.name		= "usbhost_48m_fck",
 	.parent		= &omap_48m_fck,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES2,
+	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usbhost_l3_ick = {
-	.name		= "usbhost_l3_ick",
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhost_l4_ick = {
-	.name		= "usbhost_l4_ick",
+static struct clk usbhost_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "usbhost_ick",
 	.parent		= &l4_ick,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES2,
+	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk usbhost_sar_fck = {
 	.name		= "usbhost_sar_fck",
 	.parent		= &osc_sys_ck,
+	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
 	.enable_bit	= OMAP3430ES2_SAVEANDRESTORE_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES2,
+	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2175,6 +2257,7 @@ static struct clk usim_fck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
+/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
 static struct clk gpt1_fck = {
 	.name		= "gpt1_fck",
 	.init		= &omap2_init_clksel_parent,
@@ -2184,13 +2267,16 @@ static struct clk gpt1_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk wkup_32k_fck = {
 	.name		= "wkup_32k_fck",
+	.init		= &omap2_init_clk_clkdm,
 	.parent		= &omap_32k_fck,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2200,6 +2286,7 @@ static struct clk gpio1_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2209,6 +2296,7 @@ static struct clk wdt2_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2216,6 +2304,7 @@ static struct clk wkup_l4_ick = {
 	.name		= "wkup_l4_ick",
 	.parent		= &sys_ck,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2227,6 +2316,7 @@ static struct clk usim_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
 	.flags		= CLOCK_IN_OMAP3430ES2,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2236,6 +2326,7 @@ static struct clk wdt2_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2245,6 +2336,7 @@ static struct clk wdt1_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2254,6 +2346,7 @@ static struct clk gpio1_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2263,15 +2356,18 @@ static struct clk omap_32ksync_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
+/* XXX This clock no longer exists in 3430 TRM rev F */
 static struct clk gpt12_ick = {
 	.name		= "gpt12_ick",
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2281,6 +2377,7 @@ static struct clk gpt1_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2291,16 +2388,20 @@ static struct clk gpt1_ick = {
 static struct clk per_96m_fck = {
 	.name		= "per_96m_fck",
 	.parent		= &omap_96m_alwon_fck,
+	.init		= &omap2_init_clk_clkdm,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk per_48m_fck = {
 	.name		= "per_48m_fck",
 	.parent		= &omap_48m_fck,
+	.init		= &omap2_init_clk_clkdm,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2310,6 +2411,7 @@ static struct clk uart3_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2322,6 +2424,7 @@ static struct clk gpt2_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2334,6 +2437,7 @@ static struct clk gpt3_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2346,6 +2450,7 @@ static struct clk gpt4_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2358,6 +2463,7 @@ static struct clk gpt5_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2370,6 +2476,7 @@ static struct clk gpt6_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2382,6 +2489,7 @@ static struct clk gpt7_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2394,6 +2502,7 @@ static struct clk gpt8_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2406,12 +2515,14 @@ static struct clk gpt9_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
 	.clksel		= omap343x_gpt_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk per_32k_alwon_fck = {
 	.name		= "per_32k_alwon_fck",
 	.parent		= &omap_32k_fck,
+	.clkdm_name	= "per_clkdm",
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
@@ -2422,6 +2533,7 @@ static struct clk gpio6_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2431,6 +2543,7 @@ static struct clk gpio5_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2440,6 +2553,7 @@ static struct clk gpio4_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2449,6 +2563,7 @@ static struct clk gpio3_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2458,6 +2573,7 @@ static struct clk gpio2_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2467,6 +2583,7 @@ static struct clk wdt3_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2475,6 +2592,7 @@ static struct clk per_l4_ick = {
 	.parent		= &l4_ick,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2484,6 +2602,7 @@ static struct clk gpio6_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2493,6 +2612,7 @@ static struct clk gpio5_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2502,6 +2622,7 @@ static struct clk gpio4_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2511,6 +2632,7 @@ static struct clk gpio3_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2520,6 +2642,7 @@ static struct clk gpio2_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2529,6 +2652,7 @@ static struct clk wdt3_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2538,6 +2662,7 @@ static struct clk uart3_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2547,6 +2672,7 @@ static struct clk gpt9_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2556,6 +2682,7 @@ static struct clk gpt8_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2565,6 +2692,7 @@ static struct clk gpt7_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2574,6 +2702,7 @@ static struct clk gpt6_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2583,6 +2712,7 @@ static struct clk gpt5_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2592,6 +2722,7 @@ static struct clk gpt4_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2601,6 +2732,7 @@ static struct clk gpt3_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2610,6 +2742,7 @@ static struct clk gpt2_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2620,6 +2753,7 @@ static struct clk mcbsp2_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2630,6 +2764,7 @@ static struct clk mcbsp3_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2640,12 +2775,13 @@ static struct clk mcbsp4_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static const struct clksel mcbsp_234_clksel[] = {
 	{ .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = &mcbsp_clks,  .rates = common_mcbsp_mcbsp_rates },
 	{ .parent = NULL }
 };
 
@@ -2659,6 +2795,7 @@ static struct clk mcbsp2_fck = {
 	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
 	.clksel		= mcbsp_234_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2672,6 +2809,7 @@ static struct clk mcbsp3_fck = {
 	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
 	.clksel		= mcbsp_234_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2685,6 +2823,7 @@ static struct clk mcbsp4_fck = {
 	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
 	.clksel		= mcbsp_234_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2732,6 +2871,7 @@ static struct clk emu_src_ck = {
 	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
 	.clksel		= emu_src_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2755,6 +2895,7 @@ static struct clk pclk_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
 	.clksel		= pclk_emu_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2777,6 +2918,7 @@ static struct clk pclkx2_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
 	.clksel		= pclkx2_emu_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2792,6 +2934,7 @@ static struct clk atclk_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
 	.clksel		= atclk_emu_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2802,6 +2945,7 @@ static struct clk traceclk_src_fck = {
 	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
 	.clksel		= emu_src_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2824,6 +2968,7 @@ static struct clk traceclk_fck = {
 	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
 	.clksel		= traceclk_clksel,
 	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2853,11 +2998,13 @@ static struct clk sr_l4_ick = {
 	.name		= "sr_l4_ick",
 	.parent		= &l4_ick,
 	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 /* SECURE_32K_FCK clocks */
 
+/* XXX This clock no longer exists in 3430 TRM rev F */
 static struct clk gpt12_fck = {
 	.name		= "gpt12_fck",
 	.parent		= &secure_32k_fck,
@@ -2933,6 +3080,7 @@ static struct clk *onchip_34xx_clks[] __initdata = {
 	&l3_ick,
 	&l4_ick,
 	&rm_ick,
+	&gfx_l3_ck,
 	&gfx_l3_fck,
 	&gfx_l3_ick,
 	&gfx_cg1_ck,
@@ -3014,12 +3162,10 @@ static struct clk *onchip_34xx_clks[] __initdata = {
 	&dss2_alwon_fck,
 	&dss_ick,
 	&cam_mclk,
-	&cam_l3_ick,
-	&cam_l4_ick,
+	&cam_ick,
 	&usbhost_120m_fck,
 	&usbhost_48m_fck,
-	&usbhost_l3_ick,
-	&usbhost_l4_ick,
+	&usbhost_ick,
 	&usbhost_sar_fck,
 	&usim_fck,
 	&gpt1_fck,
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
new file mode 100644
index 0000000..4c3ce9c
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -0,0 +1,623 @@
+/*
+ * OMAP2/3 clockdomain framework functions
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley and Jouni Högander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifdef CONFIG_OMAP_DEBUG_CLOCKDOMAIN
+#  define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/limits.h>
+
+#include <linux/io.h>
+
+#include <linux/bitops.h>
+
+#include <mach/clock.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+/* clkdm_list contains all registered struct clockdomains */
+static LIST_HEAD(clkdm_list);
+
+/* clkdm_mutex protects clkdm_list add and del ops */
+static DEFINE_MUTEX(clkdm_mutex);
+
+/* array of powerdomain deps to be added/removed when clkdm in hwsup mode */
+static struct clkdm_pwrdm_autodep *autodeps;
+
+
+/* Private functions */
+
+/*
+ * _autodep_lookup - resolve autodep pwrdm names to pwrdm pointers; store
+ * @autodep: struct clkdm_pwrdm_autodep * to resolve
+ *
+ * Resolve autodep powerdomain names to powerdomain pointers via
+ * pwrdm_lookup() and store the pointers in the autodep structure.  An
+ * "autodep" is a powerdomain sleep/wakeup dependency that is
+ * automatically added and removed whenever clocks in the associated
+ * clockdomain are enabled or disabled (respectively) when the
+ * clockdomain is in hardware-supervised mode.	Meant to be called
+ * once at clockdomain layer initialization, since these should remain
+ * fixed for a particular architecture.  No return value.
+ */
+static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep)
+{
+	struct powerdomain *pwrdm;
+
+	if (!autodep)
+		return;
+
+	if (!omap_chip_is(autodep->omap_chip))
+		return;
+
+	pwrdm = pwrdm_lookup(autodep->pwrdm_name);
+	if (!pwrdm) {
+		pr_debug("clockdomain: _autodep_lookup: powerdomain %s "
+			 "does not exist\n", autodep->pwrdm_name);
+		WARN_ON(1);
+		return;
+	}
+	autodep->pwrdm = pwrdm;
+
+	return;
+}
+
+/*
+ * _clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable
+ * @clkdm: struct clockdomain *
+ *
+ * Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm'
+ * in hardware-supervised mode.  Meant to be called from clock framework
+ * when a clock inside clockdomain 'clkdm' is enabled.	No return value.
+ */
+static void _clkdm_add_autodeps(struct clockdomain *clkdm)
+{
+	struct clkdm_pwrdm_autodep *autodep;
+
+	for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
+		if (!autodep->pwrdm)
+			continue;
+
+		pr_debug("clockdomain: adding %s sleepdep/wkdep for "
+			 "pwrdm %s\n", autodep->pwrdm_name,
+			 clkdm->pwrdm->name);
+
+		pwrdm_add_sleepdep(clkdm->pwrdm, autodep->pwrdm);
+		pwrdm_add_wkdep(clkdm->pwrdm, autodep->pwrdm);
+	}
+}
+
+/*
+ * _clkdm_add_autodeps - remove auto sleepdeps/wkdeps from clkdm
+ * @clkdm: struct clockdomain *
+ *
+ * Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm'
+ * in hardware-supervised mode.  Meant to be called from clock framework
+ * when a clock inside clockdomain 'clkdm' is disabled.  No return value.
+ */
+static void _clkdm_del_autodeps(struct clockdomain *clkdm)
+{
+	struct clkdm_pwrdm_autodep *autodep;
+
+	for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
+		if (!autodep->pwrdm)
+			continue;
+
+		pr_debug("clockdomain: removing %s sleepdep/wkdep for "
+			 "pwrdm %s\n", autodep->pwrdm_name,
+			 clkdm->pwrdm->name);
+
+		pwrdm_del_sleepdep(clkdm->pwrdm, autodep->pwrdm);
+		pwrdm_del_wkdep(clkdm->pwrdm, autodep->pwrdm);
+	}
+}
+
+
+static struct clockdomain *_clkdm_lookup(const char *name)
+{
+	struct clockdomain *clkdm, *temp_clkdm;
+
+	if (!name)
+		return NULL;
+
+	clkdm = NULL;
+
+	list_for_each_entry(temp_clkdm, &clkdm_list, node) {
+		if (!strcmp(name, temp_clkdm->name)) {
+			clkdm = temp_clkdm;
+			break;
+		}
+	}
+
+	return clkdm;
+}
+
+
+/* Public functions */
+
+/**
+ * clkdm_init - set up the clockdomain layer
+ * @clkdms: optional pointer to an array of clockdomains to register
+ * @init_autodeps: optional pointer to an array of autodeps to register
+ *
+ * Set up internal state.  If a pointer to an array of clockdomains
+ * was supplied, loop through the list of clockdomains, register all
+ * that are available on the current platform.	Similarly, if a
+ * pointer to an array of clockdomain-powerdomain autodependencies was
+ * provided, register those.  No return value.
+ */
+void clkdm_init(struct clockdomain **clkdms,
+		struct clkdm_pwrdm_autodep *init_autodeps)
+{
+	struct clockdomain **c = NULL;
+	struct clkdm_pwrdm_autodep *autodep = NULL;
+
+	if (clkdms)
+		for (c = clkdms; *c; c++)
+			clkdm_register(*c);
+
+	autodeps = init_autodeps;
+	if (autodeps)
+		for (autodep = autodeps; autodep->pwrdm_name; autodep++)
+			_autodep_lookup(autodep);
+}
+
+/**
+ * clkdm_register - register a clockdomain
+ * @clkdm: struct clockdomain * to register
+ *
+ * Adds a clockdomain to the internal clockdomain list.
+ * Returns -EINVAL if given a null pointer, -EEXIST if a clockdomain is
+ * already registered by the provided name, or 0 upon success.
+ */
+int clkdm_register(struct clockdomain *clkdm)
+{
+	int ret = -EINVAL;
+	struct powerdomain *pwrdm;
+
+	if (!clkdm || !clkdm->name)
+		return -EINVAL;
+
+	if (!omap_chip_is(clkdm->omap_chip))
+		return -EINVAL;
+
+	pwrdm = pwrdm_lookup(clkdm->pwrdm_name);
+	if (!pwrdm) {
+		pr_debug("clockdomain: clkdm_register %s: powerdomain %s "
+			 "does not exist\n", clkdm->name, clkdm->pwrdm_name);
+		return -EINVAL;
+	}
+	clkdm->pwrdm = pwrdm;
+
+	mutex_lock(&clkdm_mutex);
+	/* Verify that the clockdomain is not already registered */
+	if (_clkdm_lookup(clkdm->name)) {
+		ret = -EEXIST;
+		goto cr_unlock;
+	};
+
+	list_add(&clkdm->node, &clkdm_list);
+
+	pwrdm_add_clkdm(pwrdm, clkdm);
+
+	pr_debug("clockdomain: registered %s\n", clkdm->name);
+	ret = 0;
+
+cr_unlock:
+	mutex_unlock(&clkdm_mutex);
+
+	return ret;
+}
+
+/**
+ * clkdm_unregister - unregister a clockdomain
+ * @clkdm: struct clockdomain * to unregister
+ *
+ * Removes a clockdomain from the internal clockdomain list.  Returns
+ * -EINVAL if clkdm argument is NULL.
+ */
+int clkdm_unregister(struct clockdomain *clkdm)
+{
+	if (!clkdm)
+		return -EINVAL;
+
+	pwrdm_del_clkdm(clkdm->pwrdm, clkdm);
+
+	mutex_lock(&clkdm_mutex);
+	list_del(&clkdm->node);
+	mutex_unlock(&clkdm_mutex);
+
+	pr_debug("clockdomain: unregistered %s\n", clkdm->name);
+
+	return 0;
+}
+
+/**
+ * clkdm_lookup - look up a clockdomain by name, return a pointer
+ * @name: name of clockdomain
+ *
+ * Find a registered clockdomain by its name.  Returns a pointer to the
+ * struct clockdomain if found, or NULL otherwise.
+ */
+struct clockdomain *clkdm_lookup(const char *name)
+{
+	struct clockdomain *clkdm, *temp_clkdm;
+
+	if (!name)
+		return NULL;
+
+	clkdm = NULL;
+
+	mutex_lock(&clkdm_mutex);
+	list_for_each_entry(temp_clkdm, &clkdm_list, node) {
+		if (!strcmp(name, temp_clkdm->name)) {
+			clkdm = temp_clkdm;
+			break;
+		}
+	}
+	mutex_unlock(&clkdm_mutex);
+
+	return clkdm;
+}
+
+/**
+ * clkdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * Call the supplied function for each registered clockdomain.
+ * The callback function can return anything but 0 to bail
+ * out early from the iterator.  The callback function is called with
+ * the clkdm_mutex held, so no clockdomain structure manipulation
+ * functions should be called from the callback, although hardware
+ * clockdomain control functions are fine.  Returns the last return
+ * value of the callback function, which should be 0 for success or
+ * anything else to indicate failure; or -EINVAL if the function pointer
+ * is null.
+ */
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
+{
+	struct clockdomain *clkdm;
+	int ret = 0;
+
+	if (!fn)
+		return -EINVAL;
+
+	mutex_lock(&clkdm_mutex);
+	list_for_each_entry(clkdm, &clkdm_list, node) {
+		ret = (*fn)(clkdm);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&clkdm_mutex);
+
+	return ret;
+}
+
+
+/**
+ * clkdm_get_pwrdm - return a ptr to the pwrdm that this clkdm resides in
+ * @clkdm: struct clockdomain *
+ *
+ * Return a pointer to the struct powerdomain that the specified clockdomain
+ * 'clkdm' exists in, or returns NULL if clkdm argument is NULL.
+ */
+struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm)
+{
+	if (!clkdm)
+		return NULL;
+
+	return clkdm->pwrdm;
+}
+
+
+/* Hardware clockdomain control */
+
+/**
+ * omap2_clkdm_clktrctrl_read - read the clkdm's current state transition mode
+ * @clk: struct clk * of a clockdomain
+ *
+ * Return the clockdomain's current state transition mode from the
+ * corresponding domain CM_CLKSTCTRL register.	Returns -EINVAL if clk
+ * is NULL or the current mode upon success.
+ */
+static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm)
+{
+	u32 v;
+
+	if (!clkdm)
+		return -EINVAL;
+
+	v = cm_read_mod_reg(clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+	v &= clkdm->clktrctrl_mask;
+	v >>= __ffs(clkdm->clktrctrl_mask);
+
+	return v;
+}
+
+/**
+ * omap2_clkdm_sleep - force clockdomain sleep transition
+ * @clkdm: struct clockdomain *
+ *
+ * Instruct the CM to force a sleep transition on the specified
+ * clockdomain 'clkdm'.  Returns -EINVAL if clk is NULL or if
+ * clockdomain does not support software-initiated sleep; 0 upon
+ * success.
+ */
+int omap2_clkdm_sleep(struct clockdomain *clkdm)
+{
+	if (!clkdm)
+		return -EINVAL;
+
+	if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+		pr_debug("clockdomain: %s does not support forcing "
+			 "sleep via software\n", clkdm->name);
+		return -EINVAL;
+	}
+
+	pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name);
+
+	if (cpu_is_omap24xx()) {
+
+		cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
+				    clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+
+	} else if (cpu_is_omap34xx()) {
+
+		u32 v = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
+			 __ffs(clkdm->clktrctrl_mask));
+
+		cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
+				    clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+
+	} else {
+		BUG();
+	};
+
+	return 0;
+}
+
+/**
+ * omap2_clkdm_wakeup - force clockdomain wakeup transition
+ * @clkdm: struct clockdomain *
+ *
+ * Instruct the CM to force a wakeup transition on the specified
+ * clockdomain 'clkdm'.  Returns -EINVAL if clkdm is NULL or if the
+ * clockdomain does not support software-controlled wakeup; 0 upon
+ * success.
+ */
+int omap2_clkdm_wakeup(struct clockdomain *clkdm)
+{
+	if (!clkdm)
+		return -EINVAL;
+
+	if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+		pr_debug("clockdomain: %s does not support forcing "
+			 "wakeup via software\n", clkdm->name);
+		return -EINVAL;
+	}
+
+	pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name);
+
+	if (cpu_is_omap24xx()) {
+
+		cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
+				      clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+
+	} else if (cpu_is_omap34xx()) {
+
+		u32 v = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
+			 __ffs(clkdm->clktrctrl_mask));
+
+		cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
+				    clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+
+	} else {
+		BUG();
+	};
+
+	return 0;
+}
+
+/**
+ * omap2_clkdm_allow_idle - enable hwsup idle transitions for clkdm
+ * @clkdm: struct clockdomain *
+ *
+ * Allow the hardware to automatically switch the clockdomain into
+ * active or idle states, as needed by downstream clocks.  If the
+ * clockdomain has any downstream clocks enabled in the clock
+ * framework, wkdep/sleepdep autodependencies are added; this is so
+ * device drivers can read and write to the device.  No return value.
+ */
+void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+	u32 v;
+
+	if (!clkdm)
+		return;
+
+	if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
+		pr_debug("clock: automatic idle transitions cannot be enabled "
+			 "on clockdomain %s\n", clkdm->name);
+		return;
+	}
+
+	pr_debug("clockdomain: enabling automatic idle transitions for %s\n",
+		 clkdm->name);
+
+	if (atomic_read(&clkdm->usecount) > 0)
+		_clkdm_add_autodeps(clkdm);
+
+	if (cpu_is_omap24xx())
+		v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
+	else if (cpu_is_omap34xx())
+		v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
+	else
+		BUG();
+
+
+	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
+			    v << __ffs(clkdm->clktrctrl_mask),
+			    clkdm->pwrdm->prcm_offs,
+			    CM_CLKSTCTRL);
+}
+
+/**
+ * omap2_clkdm_deny_idle - disable hwsup idle transitions for clkdm
+ * @clkdm: struct clockdomain *
+ *
+ * Prevent the hardware from automatically switching the clockdomain
+ * into inactive or idle states.  If the clockdomain has downstream
+ * clocks enabled in the clock framework, wkdep/sleepdep
+ * autodependencies are removed.  No return value.
+ */
+void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+	u32 v;
+
+	if (!clkdm)
+		return;
+
+	if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
+		pr_debug("clockdomain: automatic idle transitions cannot be "
+			 "disabled on %s\n", clkdm->name);
+		return;
+	}
+
+	pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
+		 clkdm->name);
+
+	if (cpu_is_omap24xx())
+		v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
+	else if (cpu_is_omap34xx())
+		v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
+	else
+		BUG();
+
+	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
+			    v << __ffs(clkdm->clktrctrl_mask),
+			    clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+
+	if (atomic_read(&clkdm->usecount) > 0)
+		_clkdm_del_autodeps(clkdm);
+}
+
+
+/* Clockdomain-to-clock framework interface code */
+
+/**
+ * omap2_clkdm_clk_enable - add an enabled downstream clock to this clkdm
+ * @clkdm: struct clockdomain *
+ * @clk: struct clk * of the enabled downstream clock
+ *
+ * Increment the usecount of this clockdomain 'clkdm' and ensure that
+ * it is awake.  Intended to be called by clk_enable() code.  If the
+ * clockdomain is in software-supervised idle mode, force the
+ * clockdomain to wake.  If the clockdomain is in hardware-supervised
+ * idle mode, add clkdm-pwrdm autodependencies, to ensure that devices
+ * in the clockdomain can be read from/written to by on-chip processors.
+ * Returns -EINVAL if passed null pointers; returns 0 upon success or
+ * if the clockdomain is in hwsup idle mode.
+ */
+int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
+{
+	int v;
+
+	/*
+	 * XXX Rewrite this code to maintain a list of enabled
+	 * downstream clocks for debugging purposes?
+	 */
+
+	if (!clkdm || !clk)
+		return -EINVAL;
+
+	if (atomic_inc_return(&clkdm->usecount) > 1)
+		return 0;
+
+	/* Clockdomain now has one enabled downstream clock */
+
+	pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name,
+		 clk->name);
+
+	v = omap2_clkdm_clktrctrl_read(clkdm);
+
+	if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
+	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+		_clkdm_add_autodeps(clkdm);
+	else
+		omap2_clkdm_wakeup(clkdm);
+
+	return 0;
+}
+
+/**
+ * omap2_clkdm_clk_disable - remove an enabled downstream clock from this clkdm
+ * @clkdm: struct clockdomain *
+ * @clk: struct clk * of the disabled downstream clock
+ *
+ * Decrement the usecount of this clockdomain 'clkdm'. Intended to be
+ * called by clk_disable() code.  If the usecount goes to 0, put the
+ * clockdomain to sleep (software-supervised mode) or remove the
+ * clkdm-pwrdm autodependencies (hardware-supervised mode).  Returns
+ * -EINVAL if passed null pointers; -ERANGE if the clkdm usecount
+ * underflows and debugging is enabled; or returns 0 upon success or
+ * if the clockdomain is in hwsup idle mode.
+ */
+int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
+{
+	int v;
+
+	/*
+	 * XXX Rewrite this code to maintain a list of enabled
+	 * downstream clocks for debugging purposes?
+	 */
+
+	if (!clkdm || !clk)
+		return -EINVAL;
+
+#ifdef DEBUG
+	if (atomic_read(&clkdm->usecount) == 0) {
+		WARN_ON(1); /* underflow */
+		return -ERANGE;
+	}
+#endif
+
+	if (atomic_dec_return(&clkdm->usecount) > 0)
+		return 0;
+
+	/* All downstream clocks of this clockdomain are now disabled */
+
+	pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name,
+		 clk->name);
+
+	v = omap2_clkdm_clktrctrl_read(clkdm);
+
+	if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
+	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+		_clkdm_del_autodeps(clkdm);
+	else
+		omap2_clkdm_sleep(clkdm);
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
new file mode 100644
index 0000000..cd86dcc
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -0,0 +1,305 @@
+/*
+ * OMAP2/3 clockdomains
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
+
+#include <mach/clockdomain.h>
+
+/*
+ * OMAP2/3-common clockdomains
+ */
+
+/* This is an implicit clockdomain - it is never defined as such in TRM */
+static struct clockdomain wkup_clkdm = {
+	.name		= "wkup_clkdm",
+	.pwrdm_name	= "wkup_pwrdm",
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
+/*
+ * 2420-only clockdomains
+ */
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+static struct clockdomain mpu_2420_clkdm = {
+	.name		= "mpu_clkdm",
+	.pwrdm_name	= "mpu_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain iva1_2420_clkdm = {
+	.name		= "iva1_clkdm",
+	.pwrdm_name	= "dsp_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+#endif  /* CONFIG_ARCH_OMAP2420 */
+
+
+/*
+ * 2430-only clockdomains
+ */
+
+#if defined(CONFIG_ARCH_OMAP2430)
+
+static struct clockdomain mpu_2430_clkdm = {
+	.name		= "mpu_clkdm",
+	.pwrdm_name	= "mpu_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+static struct clockdomain mdm_clkdm = {
+	.name		= "mdm_clkdm",
+	.pwrdm_name	= "mdm_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+#endif    /* CONFIG_ARCH_OMAP2430 */
+
+
+/*
+ * 24XX-only clockdomains
+ */
+
+#if defined(CONFIG_ARCH_OMAP24XX)
+
+static struct clockdomain dsp_clkdm = {
+	.name		= "dsp_clkdm",
+	.pwrdm_name	= "dsp_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+};
+
+static struct clockdomain gfx_24xx_clkdm = {
+	.name		= "gfx_clkdm",
+	.pwrdm_name	= "gfx_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+};
+
+static struct clockdomain core_l3_24xx_clkdm = {
+	.name		= "core_l3_clkdm",
+	.pwrdm_name	= "core_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+};
+
+static struct clockdomain core_l4_24xx_clkdm = {
+	.name		= "core_l4_clkdm",
+	.pwrdm_name	= "core_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+};
+
+static struct clockdomain dss_24xx_clkdm = {
+	.name		= "dss_clkdm",
+	.pwrdm_name	= "core_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+};
+
+#endif   /* CONFIG_ARCH_OMAP24XX */
+
+
+/*
+ * 34xx clockdomains
+ */
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+
+static struct clockdomain mpu_34xx_clkdm = {
+	.name		= "mpu_clkdm",
+	.pwrdm_name	= "mpu_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain neon_clkdm = {
+	.name		= "neon_clkdm",
+	.pwrdm_name	= "neon_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain iva2_clkdm = {
+	.name		= "iva2_clkdm",
+	.pwrdm_name	= "iva2_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain gfx_3430es1_clkdm = {
+	.name		= "gfx_clkdm",
+	.pwrdm_name	= "gfx_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
+};
+
+static struct clockdomain sgx_clkdm = {
+	.name		= "sgx_clkdm",
+	.pwrdm_name	= "sgx_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+};
+
+/*
+ * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
+ * then that information was removed from the 34xx ES2+ TRM.  It is
+ * unclear whether the core is still there, but the clockdomain logic
+ * is there, and must be programmed to an appropriate state if the
+ * CORE clockdomain is to become inactive.
+ */
+static struct clockdomain d2d_clkdm = {
+	.name		= "d2d_clkdm",
+	.pwrdm_name	= "core_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain core_l3_34xx_clkdm = {
+	.name		= "core_l3_clkdm",
+	.pwrdm_name	= "core_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain core_l4_34xx_clkdm = {
+	.name		= "core_l4_clkdm",
+	.pwrdm_name	= "core_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dss_34xx_clkdm = {
+	.name		= "dss_clkdm",
+	.pwrdm_name	= "dss_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain cam_clkdm = {
+	.name		= "cam_clkdm",
+	.pwrdm_name	= "cam_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain usbhost_clkdm = {
+	.name		= "usbhost_clkdm",
+	.pwrdm_name	= "usbhost_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+};
+
+static struct clockdomain per_clkdm = {
+	.name		= "per_clkdm",
+	.pwrdm_name	= "per_pwrdm",
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain emu_clkdm = {
+	.name		= "emu_clkdm",
+	.pwrdm_name	= "emu_pwrdm",
+	.flags		= CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP,
+	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+#endif   /* CONFIG_ARCH_OMAP34XX */
+
+/*
+ * Clockdomain-powerdomain hwsup dependencies (34XX only)
+ */
+
+static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
+	{
+		.pwrdm_name = "mpu_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "iva2_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL }
+};
+
+/*
+ *
+ */
+
+static struct clockdomain *clockdomains_omap[] = {
+
+	&wkup_clkdm,
+
+#ifdef CONFIG_ARCH_OMAP2420
+	&mpu_2420_clkdm,
+	&iva1_2420_clkdm,
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+	&mpu_2430_clkdm,
+	&mdm_clkdm,
+#endif
+
+#ifdef CONFIG_ARCH_OMAP24XX
+	&dsp_clkdm,
+	&gfx_24xx_clkdm,
+	&core_l3_24xx_clkdm,
+	&core_l4_24xx_clkdm,
+	&dss_24xx_clkdm,
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+	&mpu_34xx_clkdm,
+	&neon_clkdm,
+	&iva2_clkdm,
+	&gfx_3430es1_clkdm,
+	&sgx_clkdm,
+	&d2d_clkdm,
+	&core_l3_34xx_clkdm,
+	&core_l4_34xx_clkdm,
+	&dss_34xx_clkdm,
+	&cam_clkdm,
+	&usbhost_clkdm,
+	&per_clkdm,
+	&emu_clkdm,
+#endif
+
+	NULL,
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index 20ac381..1098ecf 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -63,7 +63,8 @@
 #define OMAP24XX_CLKSEL_MPU_MASK			(0x1f << 0)
 
 /* CM_CLKSTCTRL_MPU */
-#define OMAP24XX_AUTOSTATE_MPU				(1 << 0)
+#define OMAP24XX_AUTOSTATE_MPU_SHIFT			0
+#define OMAP24XX_AUTOSTATE_MPU_MASK			(1 << 0)
 
 /* CM_FCLKEN1_CORE specific bits*/
 #define OMAP24XX_EN_TV_SHIFT				2
@@ -238,9 +239,12 @@
 #define OMAP24XX_CLKSEL_GPT2_MASK			(0x3 << 2)
 
 /* CM_CLKSTCTRL_CORE */
-#define OMAP24XX_AUTOSTATE_DSS				(1 << 2)
-#define OMAP24XX_AUTOSTATE_L4				(1 << 1)
-#define OMAP24XX_AUTOSTATE_L3				(1 << 0)
+#define OMAP24XX_AUTOSTATE_DSS_SHIFT			2
+#define OMAP24XX_AUTOSTATE_DSS_MASK			(1 << 2)
+#define OMAP24XX_AUTOSTATE_L4_SHIFT			1
+#define OMAP24XX_AUTOSTATE_L4_MASK			(1 << 1)
+#define OMAP24XX_AUTOSTATE_L3_SHIFT			0
+#define OMAP24XX_AUTOSTATE_L3_MASK			(1 << 0)
 
 /* CM_FCLKEN_GFX */
 #define OMAP24XX_EN_3D_SHIFT				2
@@ -255,7 +259,8 @@
 /* CM_CLKSEL_GFX specific bits */
 
 /* CM_CLKSTCTRL_GFX */
-#define OMAP24XX_AUTOSTATE_GFX				(1 << 0)
+#define OMAP24XX_AUTOSTATE_GFX_SHIFT			0
+#define OMAP24XX_AUTOSTATE_GFX_MASK			(1 << 0)
 
 /* CM_FCLKEN_WKUP specific bits */
 
@@ -367,8 +372,10 @@
 #define OMAP24XX_CLKSEL_DSP_MASK			(0x1f << 0)
 
 /* CM_CLKSTCTRL_DSP */
-#define OMAP2420_AUTOSTATE_IVA				(1 << 8)
-#define OMAP24XX_AUTOSTATE_DSP				(1 << 0)
+#define OMAP2420_AUTOSTATE_IVA_SHIFT			8
+#define OMAP2420_AUTOSTATE_IVA_MASK			(1 << 8)
+#define OMAP24XX_AUTOSTATE_DSP_SHIFT			0
+#define OMAP24XX_AUTOSTATE_DSP_MASK			(1 << 0)
 
 /* CM_FCLKEN_MDM */
 /* 2430 only */
@@ -396,6 +403,7 @@
 
 /* CM_CLKSTCTRL_MDM */
 /* 2430 only */
-#define OMAP2430_AUTOSTATE_MDM				(1 << 0)
+#define OMAP2430_AUTOSTATE_MDM_SHIFT			0
+#define OMAP2430_AUTOSTATE_MDM_MASK			(1 << 0)
 
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index ee4c0ca..219f5c8 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -96,7 +96,8 @@
 #define OMAP3430_CLKTRCTRL_IVA2_MASK			(0x3 << 0)
 
 /* CM_CLKSTST_IVA2 */
-#define OMAP3430_CLKACTIVITY_IVA2			(1 << 0)
+#define OMAP3430_CLKACTIVITY_IVA2_SHIFT			0
+#define OMAP3430_CLKACTIVITY_IVA2_MASK			(1 << 0)
 
 /* CM_REVISION specific bits */
 
@@ -140,7 +141,8 @@
 #define OMAP3430_CLKTRCTRL_MPU_MASK			(0x3 << 0)
 
 /* CM_CLKSTST_MPU */
-#define OMAP3430_CLKACTIVITY_MPU			(1 << 0)
+#define OMAP3430_CLKACTIVITY_MPU_SHIFT			0
+#define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
 
 /* CM_FCLKEN1_CORE specific bits */
 
@@ -300,9 +302,12 @@
 #define OMAP3430_CLKTRCTRL_L3_MASK			(0x3 << 0)
 
 /* CM_CLKSTST_CORE */
-#define OMAP3430ES1_CLKACTIVITY_D2D			(1 << 2)
-#define OMAP3430_CLKACTIVITY_L4				(1 << 1)
-#define OMAP3430_CLKACTIVITY_L3				(1 << 0)
+#define OMAP3430ES1_CLKACTIVITY_D2D_SHIFT		2
+#define OMAP3430ES1_CLKACTIVITY_D2D_MASK		(1 << 2)
+#define OMAP3430_CLKACTIVITY_L4_SHIFT			1
+#define OMAP3430_CLKACTIVITY_L4_MASK			(1 << 1)
+#define OMAP3430_CLKACTIVITY_L3_SHIFT			0
+#define OMAP3430_CLKACTIVITY_L3_MASK			(1 << 0)
 
 /* CM_FCLKEN_GFX */
 #define OMAP3430ES1_EN_3D				(1 << 2)
@@ -323,7 +328,8 @@
 #define OMAP3430ES1_CLKTRCTRL_GFX_MASK			(0x3 << 0)
 
 /* CM_CLKSTST_GFX */
-#define OMAP3430ES1_CLKACTIVITY_GFX			(1 << 0)
+#define OMAP3430ES1_CLKACTIVITY_GFX_SHIFT		0
+#define OMAP3430ES1_CLKACTIVITY_GFX_MASK		(1 << 0)
 
 /* CM_FCLKEN_SGX */
 #define OMAP3430ES2_EN_SGX_SHIFT			1
@@ -333,6 +339,14 @@
 #define OMAP3430ES2_CLKSEL_SGX_SHIFT			0
 #define OMAP3430ES2_CLKSEL_SGX_MASK			(0x7 << 0)
 
+/* CM_CLKSTCTRL_SGX */
+#define OMAP3430ES2_CLKTRCTRL_SGX_SHIFT			0
+#define OMAP3430ES2_CLKTRCTRL_SGX_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_SGX */
+#define OMAP3430ES2_CLKACTIVITY_SGX_SHIFT		0
+#define OMAP3430ES2_CLKACTIVITY_SGX_MASK		(1 << 0)
+
 /* CM_FCLKEN_WKUP specific bits */
 #define OMAP3430ES2_EN_USIMOCP_SHIFT			9
 
@@ -498,7 +512,8 @@
 #define OMAP3430_CLKTRCTRL_DSS_MASK			(0x3 << 0)
 
 /* CM_CLKSTST_DSS */
-#define OMAP3430_CLKACTIVITY_DSS			(1 << 0)
+#define OMAP3430_CLKACTIVITY_DSS_SHIFT			0
+#define OMAP3430_CLKACTIVITY_DSS_MASK			(1 << 0)
 
 /* CM_FCLKEN_CAM specific bits */
 
@@ -522,7 +537,8 @@
 #define OMAP3430_CLKTRCTRL_CAM_MASK			(0x3 << 0)
 
 /* CM_CLKSTST_CAM */
-#define OMAP3430_CLKACTIVITY_CAM			(1 << 0)
+#define OMAP3430_CLKACTIVITY_CAM_SHIFT			0
+#define OMAP3430_CLKACTIVITY_CAM_MASK			(1 << 0)
 
 /* CM_FCLKEN_PER specific bits */
 
@@ -598,7 +614,8 @@
 #define OMAP3430_CLKTRCTRL_PER_MASK			(0x3 << 0)
 
 /* CM_CLKSTST_PER */
-#define OMAP3430_CLKACTIVITY_PER			(1 << 0)
+#define OMAP3430_CLKACTIVITY_PER_SHIFT			0
+#define OMAP3430_CLKACTIVITY_PER_MASK			(1 << 0)
 
 /* CM_CLKSEL1_EMU */
 #define OMAP3430_DIV_DPLL4_SHIFT			24
@@ -623,7 +640,8 @@
 #define OMAP3430_CLKTRCTRL_EMU_MASK			(0x3 << 0)
 
 /* CM_CLKSTST_EMU */
-#define OMAP3430_CLKACTIVITY_EMU			(1 << 0)
+#define OMAP3430_CLKACTIVITY_EMU_SHIFT			0
+#define OMAP3430_CLKACTIVITY_EMU_MASK			(1 << 0)
 
 /* CM_CLKSEL2_EMU specific bits */
 #define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT		8
@@ -673,6 +691,8 @@
 #define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT		0
 #define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK		(3 << 0)
 
-
+/* CM_CLKSTST_USBHOST */
+#define OMAP3430ES2_CLKACTIVITY_USBHOST_SHIFT		0
+#define OMAP3430ES2_CLKACTIVITY_USBHOST_MASK		(1 << 0)
 
 #endif
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 87a44c7..65fdf78 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -18,7 +18,7 @@
 
 #ifndef __ASSEMBLER__
 #define OMAP_CM_REGADDR(module, reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
+			IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
 #else
 #define OMAP2420_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 7a7f025..90af2ac 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -13,9 +13,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
@@ -23,50 +23,7 @@
 #include <mach/board.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
-
-#if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define OMAP2_I2C_BASE2		0x48072000
-#define OMAP2_I2C_INT2		57
-
-static struct resource i2c_resources2[] = {
-	{
-		.start		= OMAP2_I2C_BASE2,
-		.end		= OMAP2_I2C_BASE2 + 0x3f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP2_I2C_INT2,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device omap_i2c_device2 = {
-	.name           = "i2c_omap",
-	.id             = 2,
-	.num_resources	= ARRAY_SIZE(i2c_resources2),
-	.resource	= i2c_resources2,
-};
-
-/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
-static void omap_init_i2c(void)
-{
-	/* REVISIT: Second I2C not in use on H4? */
-	if (machine_is_omap_h4())
-		return;
-
-	if (!cpu_is_omap2430()) {
-		omap_cfg_reg(J15_24XX_I2C2_SCL);
-		omap_cfg_reg(H19_24XX_I2C2_SDA);
-	}
-	(void) platform_device_register(&omap_i2c_device2);
-}
-
-#else
-
-static void omap_init_i2c(void) {}
-
-#endif
+#include <mach/eac.h>
 
 #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 #define OMAP2_MBOX_BASE		IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
@@ -104,7 +61,9 @@ static inline void omap_init_mbox(void) { }
 
 #if defined(CONFIG_OMAP_STI)
 
-#define OMAP2_STI_BASE		IO_ADDRESS(0x48068000)
+#if defined(CONFIG_ARCH_OMAP2)
+
+#define OMAP2_STI_BASE		0x48068000
 #define OMAP2_STI_CHANNEL_BASE	0x54000000
 #define OMAP2_STI_IRQ		4
 
@@ -124,6 +83,25 @@ static struct resource sti_resources[] = {
 		.flags		= IORESOURCE_IRQ,
 	}
 };
+#elif defined(CONFIG_ARCH_OMAP3)
+
+#define OMAP3_SDTI_BASE		0x54500000
+#define OMAP3_SDTI_CHANNEL_BASE	0x54600000
+
+static struct resource sti_resources[] = {
+	{
+		.start		= OMAP3_SDTI_BASE,
+		.end		= OMAP3_SDTI_BASE + 0xFFF,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3_SDTI_CHANNEL_BASE,
+		.end		= OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+#endif
 
 static struct platform_device sti_device = {
 	.name		= "sti",
@@ -140,12 +118,14 @@ static inline void omap_init_sti(void)
 static inline void omap_init_sti(void) {}
 #endif
 
-#if defined(CONFIG_SPI_OMAP24XX)
+#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <mach/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000
+#define OMAP2_MCSPI3_BASE		0x480b8000
+#define OMAP2_MCSPI4_BASE		0x480ba000
 
 static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
 	.num_cs		= 4,
@@ -159,7 +139,7 @@ static struct resource omap2_mcspi1_resources[] = {
 	},
 };
 
-struct platform_device omap2_mcspi1 = {
+static struct platform_device omap2_mcspi1 = {
 	.name		= "omap2_mcspi",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(omap2_mcspi1_resources),
@@ -181,7 +161,7 @@ static struct resource omap2_mcspi2_resources[] = {
 	},
 };
 
-struct platform_device omap2_mcspi2 = {
+static struct platform_device omap2_mcspi2 = {
 	.name		= "omap2_mcspi",
 	.id		= 2,
 	.num_resources	= ARRAY_SIZE(omap2_mcspi2_resources),
@@ -191,16 +171,162 @@ struct platform_device omap2_mcspi2 = {
 	},
 };
 
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
+	.num_cs		= 2,
+};
+
+static struct resource omap2_mcspi3_resources[] = {
+	{
+	.start		= OMAP2_MCSPI3_BASE,
+	.end		= OMAP2_MCSPI3_BASE + 0xff,
+	.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap2_mcspi3 = {
+	.name		= "omap2_mcspi",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(omap2_mcspi3_resources),
+	.resource	= omap2_mcspi3_resources,
+	.dev		= {
+		.platform_data = &omap2_mcspi3_config,
+	},
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap2_mcspi_platform_config omap2_mcspi4_config = {
+	.num_cs		= 1,
+};
+
+static struct resource omap2_mcspi4_resources[] = {
+	{
+		.start		= OMAP2_MCSPI4_BASE,
+		.end		= OMAP2_MCSPI4_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap2_mcspi4 = {
+	.name		= "omap2_mcspi",
+	.id		= 4,
+	.num_resources	= ARRAY_SIZE(omap2_mcspi4_resources),
+	.resource	= omap2_mcspi4_resources,
+	.dev		= {
+		.platform_data = &omap2_mcspi4_config,
+	},
+};
+#endif
+
 static void omap_init_mcspi(void)
 {
 	platform_device_register(&omap2_mcspi1);
 	platform_device_register(&omap2_mcspi2);
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+	platform_device_register(&omap2_mcspi3);
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+	platform_device_register(&omap2_mcspi4);
+#endif
 }
 
 #else
 static inline void omap_init_mcspi(void) {}
 #endif
 
+#ifdef CONFIG_SND_OMAP24XX_EAC
+
+#define OMAP2_EAC_BASE			0x48090000
+
+static struct resource omap2_eac_resources[] = {
+	{
+		.start		= OMAP2_EAC_BASE,
+		.end		= OMAP2_EAC_BASE + 0x109,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap2_eac_device = {
+	.name		= "omap24xx-eac",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap2_eac_resources),
+	.resource	= omap2_eac_resources,
+	.dev = {
+		.platform_data = NULL,
+	},
+};
+
+void omap_init_eac(struct eac_platform_data *pdata)
+{
+	omap2_eac_device.dev.platform_data = pdata;
+	platform_device_register(&omap2_eac_device);
+}
+
+#else
+void omap_init_eac(struct eac_platform_data *pdata) {}
+#endif
+
+#ifdef CONFIG_OMAP_SHA1_MD5
+static struct resource sha1_md5_resources[] = {
+	{
+		.start	= OMAP24XX_SEC_SHA1MD5_BASE,
+		.end	= OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_24XX_SHA1MD5,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device sha1_md5_device = {
+	.name		= "OMAP SHA1/MD5",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sha1_md5_resources),
+	.resource	= sha1_md5_resources,
+};
+
+static void omap_init_sha1_md5(void)
+{
+	platform_device_register(&sha1_md5_device);
+}
+#else
+static inline void omap_init_sha1_md5(void) { }
+#endif
+
+#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#define OMAP_HDQ_BASE	0x480B2000
+#endif
+static struct resource omap_hdq_resources[] = {
+	{
+		.start		= OMAP_HDQ_BASE,
+		.end		= OMAP_HDQ_BASE + 0x1C,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_24XX_HDQ_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+static struct platform_device omap_hdq_dev = {
+	.name = "omap_hdq",
+	.id = 0,
+	.dev = {
+		.platform_data = NULL,
+	},
+	.num_resources	= ARRAY_SIZE(omap_hdq_resources),
+	.resource	= omap_hdq_resources,
+};
+static inline void omap_hdq_init(void)
+{
+	(void) platform_device_register(&omap_hdq_dev);
+}
+#else
+static inline void omap_hdq_init(void) {}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
@@ -208,10 +334,11 @@ static int __init omap2_init_devices(void)
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	omap_init_i2c();
 	omap_init_mbox();
 	omap_init_mcspi();
+	omap_hdq_init();
 	omap_init_sti();
+	omap_init_sha1_md5();
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f51d69b..763bdbe 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -9,27 +9,23 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#undef DEBUG
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/module.h>
 
-#include <asm/io.h>
 #include <asm/mach-types.h>
 #include <mach/gpmc.h>
 
-#undef DEBUG
-
-#ifdef CONFIG_ARCH_OMAP2420
-#define GPMC_BASE		0x6800a000
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2430
-#define GPMC_BASE		0x6E000000
-#endif
+#include <mach/sdrc.h>
 
+/* GPMC register offsets */
 #define GPMC_REVISION		0x00
 #define GPMC_SYSCONFIG		0x10
 #define GPMC_SYSSTATUS		0x14
@@ -51,7 +47,6 @@
 #define GPMC_CS0		0x60
 #define GPMC_CS_SIZE		0x30
 
-#define GPMC_CS_NUM		8
 #define GPMC_MEM_START		0x00000000
 #define GPMC_MEM_END		0x3FFFFFFF
 #define BOOT_ROM_SPACE		0x100000	/* 1MB */
@@ -64,12 +59,9 @@ static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 static unsigned		gpmc_cs_map;
 
-static void __iomem *gpmc_base =
-	(void __iomem *) IO_ADDRESS(GPMC_BASE);
-static void __iomem *gpmc_cs_base =
-	(void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+static void __iomem *gpmc_base;
 
-static struct clk *gpmc_fck;
+static struct clk *gpmc_l3_clk;
 
 static void gpmc_write_reg(int idx, u32 val)
 {
@@ -85,19 +77,32 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val)
 {
 	void __iomem *reg_addr;
 
-	reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx;
+	reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
 	__raw_writel(val, reg_addr);
 }
 
 u32 gpmc_cs_read_reg(int cs, int idx)
 {
-	return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
+	void __iomem *reg_addr;
+
+	reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
+	return __raw_readl(reg_addr);
 }
 
+/* TODO: Add support for gpmc_fck to clock framework and use it */
 unsigned long gpmc_get_fclk_period(void)
 {
-	/* In picoseconds */
-	return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000);
+	unsigned long rate = clk_get_rate(gpmc_l3_clk);
+
+	if (rate == 0) {
+		printk(KERN_WARNING "gpmc_l3_clk not enabled\n");
+		return 0;
+	}
+
+	rate /= 1000;
+	rate = 1000000000 / rate;	/* In picoseconds */
+
+	return rate;
 }
 
 unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
@@ -110,6 +115,11 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
 	return (time_ns * 1000 + tick_ps - 1) / tick_ps;
 }
 
+unsigned int gpmc_ticks_to_ns(unsigned int ticks)
+{
+	return ticks * gpmc_get_fclk_period() / 1000;
+}
+
 unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
 {
 	unsigned long ticks = gpmc_ns_to_ticks(time_ns);
@@ -210,6 +220,11 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
 
 	GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
 
+	if (cpu_is_omap34xx()) {
+		GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
+		GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
+	}
+
 	/* caller is expected to have initialized CONFIG1 to cover
 	 * at least sync vs async
 	 */
@@ -350,6 +365,7 @@ out:
 	spin_unlock(&gpmc_mem_lock);
 	return r;
 }
+EXPORT_SYMBOL(gpmc_cs_request);
 
 void gpmc_cs_free(int cs)
 {
@@ -365,8 +381,9 @@ void gpmc_cs_free(int cs)
 	gpmc_cs_set_reserved(cs, 0);
 	spin_unlock(&gpmc_mem_lock);
 }
+EXPORT_SYMBOL(gpmc_cs_free);
 
-void __init gpmc_mem_init(void)
+static void __init gpmc_mem_init(void)
 {
 	int cs;
 	unsigned long boot_rom_space = 0;
@@ -396,12 +413,33 @@ void __init gpmc_mem_init(void)
 void __init gpmc_init(void)
 {
 	u32 l;
+	char *ck;
+
+	if (cpu_is_omap24xx()) {
+		ck = "core_l3_ck";
+		if (cpu_is_omap2420())
+			l = OMAP2420_GPMC_BASE;
+		else
+			l = OMAP34XX_GPMC_BASE;
+	} else if (cpu_is_omap34xx()) {
+		ck = "gpmc_fck";
+		l = OMAP34XX_GPMC_BASE;
+	}
 
-	gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck))
-		WARN_ON(1);
-	else
-		clk_enable(gpmc_fck);
+	gpmc_l3_clk = clk_get(NULL, ck);
+	if (IS_ERR(gpmc_l3_clk)) {
+		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
+		return -ENODEV;
+	}
+
+	gpmc_base = ioremap(l, SZ_4K);
+	if (!gpmc_base) {
+		clk_put(gpmc_l3_clk);
+		printk(KERN_ERR "Could not get GPMC register memory\n");
+		return -ENOMEM;
+	}
+
+	BUG_ON(IS_ERR(gpmc_l3_clk));
 
 	l = gpmc_read_reg(GPMC_REVISION);
 	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a5d4526..bf45ff3 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -14,27 +14,19 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
+#include <asm/cputype.h>
 
+#include <mach/common.h>
 #include <mach/control.h>
 #include <mach/cpu.h>
 
-#if defined(CONFIG_ARCH_OMAP2420)
-#define TAP_BASE	io_p2v(0x48014000)
-#elif defined(CONFIG_ARCH_OMAP2430)
-#define TAP_BASE	io_p2v(0x4900A000)
-#elif defined(CONFIG_ARCH_OMAP34XX)
-#define TAP_BASE	io_p2v(0x4830A000)
-#endif
+static u32 class;
+static void __iomem *tap_base;
+static u16 tap_prod_id;
 
 #define OMAP_TAP_IDCODE		0x0204
-#if defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP_TAP_PROD_ID	0x0210
-#else
-#define OMAP_TAP_PROD_ID	0x0208
-#endif
-
 #define OMAP_TAP_DIE_ID_0	0x0218
 #define OMAP_TAP_DIE_ID_1	0x021C
 #define OMAP_TAP_DIE_ID_2	0x0220
@@ -93,18 +85,24 @@ static u32 __init read_tap_reg(int reg)
 	 * it means its Cortex r0p0 which is 3430 ES1
 	 */
 	if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
+
+		if (reg == tap_prod_id) {
+			regval = 0x000F00F0;
+			goto out;
+		}
+
 		switch (reg) {
 		case OMAP_TAP_IDCODE  : regval = 0x0B7AE02F; break;
 		/* Making DevType as 0xF in ES1 to differ from ES2 */
-		case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break;
 		case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
 		case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
 		case OMAP_TAP_DIE_ID_2:	regval = 0x00000000; break;
 		case OMAP_TAP_DIE_ID_3:	regval = 0x2d2c0000; break;
 		}
 	} else
-		regval = __raw_readl(TAP_BASE + reg);
+		regval = __raw_readl(tap_base + reg);
 
+out:
 	return regval;
 
 }
@@ -203,7 +201,7 @@ void __init omap2_check_revision(void)
 	u8  rev;
 
 	idcode = read_tap_reg(OMAP_TAP_IDCODE);
-	prod_id = read_tap_reg(OMAP_TAP_PROD_ID);
+	prod_id = read_tap_reg(tap_prod_id);
 	hawkeye = (idcode >> 12) & 0xffff;
 	rev = (idcode >> 28) & 0x0f;
 	dev_type = (prod_id >> 16) & 0x0f;
@@ -268,3 +266,13 @@ void __init omap2_check_revision(void)
 
 }
 
+void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
+{
+	class = omap2_globals->class;
+	tap_base = omap2_globals->tap;
+
+	if (class == 0x3430)
+		tap_prod_id = 0x0210;
+	else
+		tap_prod_id = 0x0208;
+}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 987351f..5ea64f9 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,8 +4,11 @@
  * OMAP2 I/O mapping code
  *
  * Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * Updated map desc to add 2430 support : <x0khasim@ti.com>
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Author:
+ *	Juha Yrjola <juha.yrjola@nokia.com>
+ *	Syed Khasim <x0khasim@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -15,27 +18,34 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <asm/tlb.h>
-#include <asm/io.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
 #include <mach/omapfb.h>
+#include <mach/sram.h>
+
+#include "memory.h"
+
+#include "clock.h"
+
+#include <mach/powerdomain.h>
+
+#include "powerdomains.h"
 
-extern void omap_sram_init(void);
-extern int omap2_clk_init(void);
-extern void omap2_check_revision(void);
-extern void omap2_init_memory(void);
-extern void gpmc_init(void);
-extern void omapfb_reserve_sdram(void);
+#include <mach/clockdomain.h>
+#include "clockdomains.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
-static struct map_desc omap2_io_desc[] __initdata = {
+
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct map_desc omap24xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_24XX_VIRT,
 		.pfn		= __phys_to_pfn(L3_24XX_PHYS),
@@ -43,12 +53,39 @@ static struct map_desc omap2_io_desc[] __initdata = {
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual        = L4_24XX_VIRT,
-		.pfn            = __phys_to_pfn(L4_24XX_PHYS),
-		.length         = L4_24XX_SIZE,
-		.type           = MT_DEVICE
+		.virtual	= L4_24XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_24XX_PHYS),
+		.length		= L4_24XX_SIZE,
+		.type		= MT_DEVICE
 	},
+};
+
+#ifdef CONFIG_ARCH_OMAP2420
+static struct map_desc omap242x_io_desc[] __initdata = {
+	{
+		.virtual	= DSP_MEM_24XX_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MEM_24XX_PHYS),
+		.length		= DSP_MEM_24XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DSP_IPI_24XX_VIRT,
+		.pfn		= __phys_to_pfn(DSP_IPI_24XX_PHYS),
+		.length		= DSP_IPI_24XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DSP_MMU_24XX_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MMU_24XX_PHYS),
+		.length		= DSP_MMU_24XX_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+#endif
+
 #ifdef CONFIG_ARCH_OMAP2430
+static struct map_desc omap243x_io_desc[] __initdata = {
 	{
 		.virtual	= L4_WK_243X_VIRT,
 		.pfn		= __phys_to_pfn(L4_WK_243X_PHYS),
@@ -61,30 +98,90 @@ static struct map_desc omap2_io_desc[] __initdata = {
 		.length		= OMAP243X_GPMC_SIZE,
 		.type		= MT_DEVICE
 	},
+	{
+		.virtual	= OMAP243X_SDRC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP243X_SDRC_PHYS),
+		.length		= OMAP243X_SDRC_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP243X_SMS_VIRT,
+		.pfn		= __phys_to_pfn(OMAP243X_SMS_PHYS),
+		.length		= OMAP243X_SMS_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+#endif
 #endif
+
+#ifdef	CONFIG_ARCH_OMAP34XX
+static struct map_desc omap34xx_io_desc[] __initdata = {
 	{
-		.virtual	= DSP_MEM_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MEM_24XX_PHYS),
-		.length		= DSP_MEM_24XX_SIZE,
+		.virtual	= L3_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_34XX_PHYS),
+		.length		= L3_34XX_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_IPI_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_IPI_24XX_PHYS),
-		.length		= DSP_IPI_24XX_SIZE,
+		.virtual	= L4_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_34XX_PHYS),
+		.length		= L4_34XX_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_MMU_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MMU_24XX_PHYS),
-		.length		= DSP_MMU_24XX_SIZE,
+		.virtual	= L4_WK_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_34XX_PHYS),
+		.length		= L4_WK_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP34XX_GPMC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP34XX_GPMC_PHYS),
+		.length		= OMAP34XX_GPMC_SIZE,
 		.type		= MT_DEVICE
-	}
+	},
+	{
+		.virtual	= OMAP343X_SMS_VIRT,
+		.pfn		= __phys_to_pfn(OMAP343X_SMS_PHYS),
+		.length		= OMAP343X_SMS_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP343X_SDRC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP343X_SDRC_PHYS),
+		.length		= OMAP343X_SDRC_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= L4_PER_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_34XX_PHYS),
+		.length		= L4_PER_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= L4_EMU_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_EMU_34XX_PHYS),
+		.length		= L4_EMU_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
 };
+#endif
 
 void __init omap2_map_common_io(void)
 {
-	iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
+#if defined(CONFIG_ARCH_OMAP2420)
+	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+	iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+	iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
+#endif
 
 	/* Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
@@ -101,12 +198,9 @@ void __init omap2_map_common_io(void)
 void __init omap2_init_common_hw(void)
 {
 	omap2_mux_init();
+	pwrdm_init(powerdomains_omap);
+	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
-/*
- * Need to Fix this for 2430
- */
-#ifndef CONFIG_ARCH_OMAP2430
 	omap2_init_memory();
-#endif
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 9ef15b3..c40fc37 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,17 +13,23 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
 
-#define INTC_REVISION	0x0000
-#define INTC_SYSCONFIG	0x0010
-#define INTC_SYSSTATUS	0x0014
-#define INTC_CONTROL	0x0048
-#define INTC_MIR_CLEAR0	0x0088
-#define INTC_MIR_SET0	0x008c
+
+/* selected INTC register offsets */
+
+#define INTC_REVISION		0x0000
+#define INTC_SYSCONFIG		0x0010
+#define INTC_SYSSTATUS		0x0014
+#define INTC_CONTROL		0x0048
+#define INTC_MIR_CLEAR0		0x0088
+#define INTC_MIR_SET0		0x008c
+#define INTC_PENDING_IRQ0	0x0098
+
+/* Number of IRQ state bits in each MIR register */
+#define IRQ_BITS_PER_REG	32
 
 /*
  * OMAP2 has a number of different interrupt controllers, each interrupt
@@ -32,48 +38,50 @@
  * for each bank.. when in doubt, consult the TRM.
  */
 static struct omap_irq_bank {
-	unsigned long base_reg;
+	void __iomem *base_reg;
 	unsigned int nr_irqs;
 } __attribute__ ((aligned(4))) irq_banks[] = {
 	{
 		/* MPU INTC */
-		.base_reg	= IO_ADDRESS(OMAP24XX_IC_BASE),
+		.base_reg	= 0,
 		.nr_irqs	= 96,
-	}, {
-		/* XXX: DSP INTC */
-	}
+	},
 };
 
+/* INTC bank register get/set */
+
+static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
+{
+	__raw_writel(val, bank->base_reg + reg);
+}
+
+static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
+{
+	return __raw_readl(bank->base_reg + reg);
+}
+
 /* XXX: FIQ and additional INTC support (only MPU at the moment) */
 static void omap_ack_irq(unsigned int irq)
 {
-	__raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL);
+	intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
 }
 
 static void omap_mask_irq(unsigned int irq)
 {
-	int offset = (irq >> 5) << 5;
+	int offset = irq & (~(IRQ_BITS_PER_REG - 1));
 
-	if (irq >= 64) {
-		irq %= 64;
-	} else if (irq >= 32) {
-		irq %= 32;
-	}
+	irq &= (IRQ_BITS_PER_REG - 1);
 
-	__raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset);
+	intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
 }
 
 static void omap_unmask_irq(unsigned int irq)
 {
-	int offset = (irq >> 5) << 5;
+	int offset = irq & (~(IRQ_BITS_PER_REG - 1));
 
-	if (irq >= 64) {
-		irq %= 64;
-	} else if (irq >= 32) {
-		irq %= 32;
-	}
+	irq &= (IRQ_BITS_PER_REG - 1);
 
-	__raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset);
+	intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset);
 }
 
 static void omap_mask_ack_irq(unsigned int irq)
@@ -93,45 +101,46 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
 {
 	unsigned long tmp;
 
-	tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff;
-	printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx "
+	tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
+	printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
 			 "(revision %ld.%ld) with %d interrupts\n",
 			 bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
 
-	tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG);
+	tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
 	tmp |= 1 << 1;	/* soft reset */
-	__raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG);
+	intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
 
-	while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1))
+	while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
 		/* Wait for reset to complete */;
 
 	/* Enable autoidle */
-	__raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG);
+	intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
 }
 
 void __init omap_init_irq(void)
 {
-	unsigned long nr_irqs = 0;
+	unsigned long nr_of_irqs = 0;
 	unsigned int nr_banks = 0;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
 		struct omap_irq_bank *bank = irq_banks + i;
 
-		/* XXX */
-		if (!bank->base_reg)
-			continue;
+		if (cpu_is_omap24xx())
+			bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+		else if (cpu_is_omap34xx())
+			bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
 
 		omap_irq_bank_init_one(bank);
 
-		nr_irqs += bank->nr_irqs;
+		nr_of_irqs += bank->nr_irqs;
 		nr_banks++;
 	}
 
 	printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
-	       nr_irqs, nr_banks, nr_banks > 1 ? "s" : "");
+	       nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
 
-	for (i = 0; i < nr_irqs; i++) {
+	for (i = 0; i < nr_of_irqs; i++) {
 		set_irq_chip(i, &omap_irq_chip);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID);
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index a480b96..32b7af3 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -14,9 +14,9 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 #include <mach/mailbox.h>
 #include <mach/irqs.h>
-#include <asm/io.h>
 
 #define MAILBOX_REVISION		0x00
 #define MAILBOX_SYSCONFIG		0x10
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index b261f1f..cae3ebe 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -89,6 +89,30 @@ static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
 			.disable	= omap_mcbsp_clk_disable,
 		},
 	},
+	{
+		.clk = {
+			.name		= "mcbsp_clk",
+			.id		= 3,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
+	{
+		.clk = {
+			.name		= "mcbsp_clk",
+			.id		= 4,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
+	{
+		.clk = {
+			.name		= "mcbsp_clk",
+			.id		= 5,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
 };
 
 #define omap_mcbsp_clks_size	ARRAY_SIZE(omap_mcbsp_clks)
@@ -117,25 +141,14 @@ static void omap2_mcbsp_request(unsigned int id)
 		omap2_mcbsp2_mux_setup();
 }
 
-static int omap2_mcbsp_check(unsigned int id)
-{
-	if (id > OMAP_MAX_MCBSP_COUNT - 1) {
-		printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
-		return -ENODEV;
-	}
-	return 0;
-}
-
 static struct omap_mcbsp_ops omap2_mcbsp_ops = {
 	.request	= omap2_mcbsp_request,
-	.check		= omap2_mcbsp_check,
 };
 
-#ifdef CONFIG_ARCH_OMAP24XX
-static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
+#ifdef CONFIG_ARCH_OMAP2420
+static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP24XX_MCBSP1_BASE,
-		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
@@ -145,7 +158,6 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
-		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
@@ -154,17 +166,70 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 };
-#define OMAP24XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap24xx_mcbsp_pdata)
+#define OMAP2420_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2420_mcbsp_pdata)
 #else
-#define omap24xx_mcbsp_pdata		NULL
-#define OMAP24XX_MCBSP_PDATA_SZ		0
+#define omap2420_mcbsp_pdata		NULL
+#define OMAP2420_MCBSP_PDATA_SZ		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
+	{
+		.phys_base	= OMAP24XX_MCBSP1_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
+		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP24XX_MCBSP2_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
+		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP2430_MCBSP3_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP3_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP3_TX,
+		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP2430_MCBSP4_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP4_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP4_TX,
+		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP2430_MCBSP5_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP5_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP5_TX,
+		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+};
+#define OMAP2430_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2430_mcbsp_pdata)
+#else
+#define omap2430_mcbsp_pdata		NULL
+#define OMAP2430_MCBSP_PDATA_SZ		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP34XX
 static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP34XX_MCBSP1_BASE,
-		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
@@ -174,7 +239,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
-		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
@@ -182,6 +246,33 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.ops		= &omap2_mcbsp_ops,
 		.clk_name	= "mcbsp_clk",
 	},
+	{
+		.phys_base	= OMAP34XX_MCBSP3_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP3_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP3_TX,
+		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP34XX_MCBSP4_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP4_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP4_TX,
+		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP34XX_MCBSP5_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP5_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP5_TX,
+		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
 #else
@@ -189,7 +280,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 #define OMAP34XX_MCBSP_PDATA_SZ		0
 #endif
 
-int __init omap2_mcbsp_init(void)
+static int __init omap2_mcbsp_init(void)
 {
 	int i;
 
@@ -199,10 +290,24 @@ int __init omap2_mcbsp_init(void)
 		clk_register(&omap_mcbsp_clks[i].clk);
 	}
 
-	if (cpu_is_omap24xx())
-		omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata,
-						OMAP24XX_MCBSP_PDATA_SZ);
+	if (cpu_is_omap2420())
+		omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
+	if (cpu_is_omap2430())
+		omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
+	if (cpu_is_omap34xx())
+		omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
+
+	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
+								GFP_KERNEL);
+	if (!mcbsp_ptr)
+		return -ENOMEM;
 
+	if (cpu_is_omap2420())
+		omap_mcbsp_register_board_cfg(omap2420_mcbsp_pdata,
+						OMAP2420_MCBSP_PDATA_SZ);
+	if (cpu_is_omap2430())
+		omap_mcbsp_register_board_cfg(omap2430_mcbsp_pdata,
+						OMAP2430_MCBSP_PDATA_SZ);
 	if (cpu_is_omap34xx())
 		omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
 						OMAP34XX_MCBSP_PDATA_SZ);
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 6b49cc9..882c702 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -21,8 +21,7 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <mach/common.h>
 #include <mach/clock.h>
@@ -102,6 +101,17 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force)
 	return prev;
 }
 
+#if !defined(CONFIG_ARCH_OMAP2)
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock)
+{
+}
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type)
+{
+}
+#endif
+
 void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 {
 	unsigned long dll_cnt;
@@ -166,6 +176,9 @@ void __init omap2_init_memory(void)
 {
 	u32 l;
 
+	if (!cpu_is_omap2420())
+		return;
+
 	l = sms_read_reg(SMS_SYSCONFIG);
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index 9a280b5..bb3db80 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -14,6 +14,9 @@
  * published by the Free Software Foundation.
  */
 
+#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
+#define ARCH_ARM_MACH_OMAP2_MEMORY_H
+
 /* Memory timings */
 #define M_DDR		1
 #define M_LOCK_CTRL	(1 << 2)
@@ -34,3 +37,7 @@ extern u32 omap2_memory_get_fast_dll_ctrl(void);
 extern u32 omap2_memory_get_type(void);
 u32 omap2_dll_force_needed(void);
 u32 omap2_reprogram_sdrc(u32 level, u32 force);
+void __init omap2_init_memory(void);
+void __init gpmc_init(void);
+
+#endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 443d07f..b139367 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-omap2/mux.c
  *
- * OMAP2 pin multiplexing configurations
+ * OMAP2 and OMAP3 pin multiplexing configurations
  *
  * Copyright (C) 2004 - 2008 Texas Instruments Inc.
  * Copyright (C) 2003 - 2008 Nokia Corporation
@@ -25,10 +25,11 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
-#include <asm/system.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/spinlock.h>
 
+#include <asm/system.h>
+
 #include <mach/control.h>
 #include <mach/mux.h>
 
@@ -219,16 +220,222 @@ MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF",	0x0131,	0,	0,	0,	1)
 #define OMAP24XX_PINS_SZ	0
 #endif	/* CONFIG_ARCH_OMAP24XX */
 
-#define OMAP24XX_PULL_ENA	(1 << 3)
-#define OMAP24XX_PULL_UP	(1 << 4)
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct pin_config __initdata_or_module omap34xx_pins[] = {
+/*
+ *		Name, reg-offset,
+ *		mux-mode | [active-mode | off-mode]
+ */
+
+/* 34xx I2C */
+MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 1*/
+MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 2*/
+MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 3*/
+MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+
+};
+
+#define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
+
+#else
+#define omap34xx_pins		NULL
+#define OMAP34XX_PINS_SZ	0
+#endif	/* CONFIG_ARCH_OMAP34XX */
 
 #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
+static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
 {
 	u16 orig;
 	u8 warn = 0, debug = 0;
 
-	orig = omap_ctrl_readb(cfg->mux_reg);
+	if (cpu_is_omap24xx())
+		orig = omap_ctrl_readb(cfg->mux_reg);
+	else
+		orig = omap_ctrl_readw(cfg->mux_reg);
 
 #ifdef	CONFIG_OMAP_MUX_DEBUG
 	debug = cfg->debug;
@@ -254,9 +461,9 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
 	spin_lock_irqsave(&mux_spin_lock, flags);
 	reg |= cfg->mask & 0x7;
 	if (cfg->pull_val)
-		reg |= OMAP24XX_PULL_ENA;
+		reg |= OMAP2_PULL_ENA;
 	if (cfg->pu_pd_val)
-		reg |= OMAP24XX_PULL_UP;
+		reg |= OMAP2_PULL_UP;
 	omap2_cfg_debug(cfg, reg);
 	omap_ctrl_writeb(reg, cfg->mux_reg);
 	spin_unlock_irqrestore(&mux_spin_lock, flags);
@@ -264,7 +471,26 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
 	return 0;
 }
 #else
-#define omap24xx_cfg_reg	0
+#define omap24xx_cfg_reg	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
+{
+	static DEFINE_SPINLOCK(mux_spin_lock);
+	unsigned long flags;
+	u16 reg = 0;
+
+	spin_lock_irqsave(&mux_spin_lock, flags);
+	reg |= cfg->mux_val;
+	omap2_cfg_debug(cfg, reg);
+	omap_ctrl_writew(reg, cfg->mux_reg);
+	spin_unlock_irqrestore(&mux_spin_lock, flags);
+
+	return 0;
+}
+#else
+#define omap34xx_cfg_reg	NULL
 #endif
 
 int __init omap2_mux_init(void)
@@ -273,6 +499,10 @@ int __init omap2_mux_init(void)
 		arch_mux_cfg.pins	= omap24xx_pins;
 		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
 		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
+	} else if (cpu_is_omap34xx()) {
+		arch_mux_cfg.pins	= omap34xx_pins;
+		arch_mux_cfg.size	= OMAP34XX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap34xx_cfg_reg;
 	}
 
 	return omap_mux_register(&arch_mux_cfg);
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 8671e10..55361c1 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -24,8 +24,8 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
new file mode 100644
index 0000000..73e2971
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -0,0 +1,1113 @@
+/*
+ * OMAP powerdomain control
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifdef CONFIG_OMAP_DEBUG_POWERDOMAIN
+# define DEBUG
+#endif
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/atomic.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+
+#include <mach/cpu.h>
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+/* pwrdm_list contains all registered struct powerdomains */
+static LIST_HEAD(pwrdm_list);
+
+/*
+ * pwrdm_rwlock protects pwrdm_list add and del ops - also reused to
+ * protect pwrdm_clkdms[] during clkdm add/del ops
+ */
+static DEFINE_RWLOCK(pwrdm_rwlock);
+
+
+/* Private functions */
+
+static u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	u32 v;
+
+	v = prm_read_mod_reg(domain, idx);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+static struct powerdomain *_pwrdm_lookup(const char *name)
+{
+	struct powerdomain *pwrdm, *temp_pwrdm;
+
+	pwrdm = NULL;
+
+	list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
+		if (!strcmp(name, temp_pwrdm->name)) {
+			pwrdm = temp_pwrdm;
+			break;
+		}
+	}
+
+	return pwrdm;
+}
+
+/* _pwrdm_deps_lookup - look up the specified powerdomain in a pwrdm list */
+static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
+					      struct pwrdm_dep *deps)
+{
+	struct pwrdm_dep *pd;
+
+	if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip))
+		return ERR_PTR(-EINVAL);
+
+	for (pd = deps; pd; pd++) {
+
+		if (!omap_chip_is(pd->omap_chip))
+			continue;
+
+		if (!pd->pwrdm && pd->pwrdm_name)
+			pd->pwrdm = pwrdm_lookup(pd->pwrdm_name);
+
+		if (pd->pwrdm == pwrdm)
+			break;
+
+	}
+
+	if (!pd)
+		return ERR_PTR(-ENOENT);
+
+	return pd->pwrdm;
+}
+
+
+/* Public functions */
+
+/**
+ * pwrdm_init - set up the powerdomain layer
+ *
+ * Loop through the list of powerdomains, registering all that are
+ * available on the current CPU. If pwrdm_list is supplied and not
+ * null, all of the referenced powerdomains will be registered.  No
+ * return value.
+ */
+void pwrdm_init(struct powerdomain **pwrdm_list)
+{
+	struct powerdomain **p = NULL;
+
+	if (pwrdm_list)
+		for (p = pwrdm_list; *p; p++)
+			pwrdm_register(*p);
+}
+
+/**
+ * pwrdm_register - register a powerdomain
+ * @pwrdm: struct powerdomain * to register
+ *
+ * Adds a powerdomain to the internal powerdomain list.  Returns
+ * -EINVAL if given a null pointer, -EEXIST if a powerdomain is
+ * already registered by the provided name, or 0 upon success.
+ */
+int pwrdm_register(struct powerdomain *pwrdm)
+{
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (!omap_chip_is(pwrdm->omap_chip))
+		return -EINVAL;
+
+	write_lock_irqsave(&pwrdm_rwlock, flags);
+	if (_pwrdm_lookup(pwrdm->name)) {
+		ret = -EEXIST;
+		goto pr_unlock;
+	}
+
+	list_add(&pwrdm->node, &pwrdm_list);
+
+	pr_debug("powerdomain: registered %s\n", pwrdm->name);
+	ret = 0;
+
+pr_unlock:
+	write_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+	return ret;
+}
+
+/**
+ * pwrdm_unregister - unregister a powerdomain
+ * @pwrdm: struct powerdomain * to unregister
+ *
+ * Removes a powerdomain from the internal powerdomain list.  Returns
+ * -EINVAL if pwrdm argument is NULL.
+ */
+int pwrdm_unregister(struct powerdomain *pwrdm)
+{
+	unsigned long flags;
+
+	if (!pwrdm)
+		return -EINVAL;
+
+	write_lock_irqsave(&pwrdm_rwlock, flags);
+	list_del(&pwrdm->node);
+	write_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+	pr_debug("powerdomain: unregistered %s\n", pwrdm->name);
+
+	return 0;
+}
+
+/**
+ * pwrdm_lookup - look up a powerdomain by name, return a pointer
+ * @name: name of powerdomain
+ *
+ * Find a registered powerdomain by its name.  Returns a pointer to the
+ * struct powerdomain if found, or NULL otherwise.
+ */
+struct powerdomain *pwrdm_lookup(const char *name)
+{
+	struct powerdomain *pwrdm;
+	unsigned long flags;
+
+	if (!name)
+		return NULL;
+
+	read_lock_irqsave(&pwrdm_rwlock, flags);
+	pwrdm = _pwrdm_lookup(name);
+	read_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+	return pwrdm;
+}
+
+/**
+ * pwrdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * Call the supplied function for each registered powerdomain.  The
+ * callback function can return anything but 0 to bail out early from
+ * the iterator.  The callback function is called with the pwrdm_rwlock
+ * held for reading, so no powerdomain structure manipulation
+ * functions should be called from the callback, although hardware
+ * powerdomain control functions are fine.  Returns the last return
+ * value of the callback function, which should be 0 for success or
+ * anything else to indicate failure; or -EINVAL if the function
+ * pointer is null.
+ */
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
+{
+	struct powerdomain *temp_pwrdm;
+	unsigned long flags;
+	int ret = 0;
+
+	if (!fn)
+		return -EINVAL;
+
+	read_lock_irqsave(&pwrdm_rwlock, flags);
+	list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
+		ret = (*fn)(temp_pwrdm);
+		if (ret)
+			break;
+	}
+	read_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+	return ret;
+}
+
+/**
+ * pwrdm_add_clkdm - add a clockdomain to a powerdomain
+ * @pwrdm: struct powerdomain * to add the clockdomain to
+ * @clkdm: struct clockdomain * to associate with a powerdomain
+ *
+ * Associate the clockdomain 'clkdm' with a powerdomain 'pwrdm'.  This
+ * enables the use of pwrdm_for_each_clkdm().  Returns -EINVAL if
+ * presented with invalid pointers; -ENOMEM if memory could not be allocated;
+ * or 0 upon success.
+ */
+int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
+{
+	unsigned long flags;
+	int i;
+	int ret = -EINVAL;
+
+	if (!pwrdm || !clkdm)
+		return -EINVAL;
+
+	pr_debug("powerdomain: associating clockdomain %s with powerdomain "
+		 "%s\n", clkdm->name, pwrdm->name);
+
+	write_lock_irqsave(&pwrdm_rwlock, flags);
+
+	for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
+		if (!pwrdm->pwrdm_clkdms[i])
+			break;
+#ifdef DEBUG
+		if (pwrdm->pwrdm_clkdms[i] == clkdm) {
+			ret = -EINVAL;
+			goto pac_exit;
+		}
+#endif
+	}
+
+	if (i == PWRDM_MAX_CLKDMS) {
+		pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for "
+			 "pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name);
+		WARN_ON(1);
+		ret = -ENOMEM;
+		goto pac_exit;
+	}
+
+	pwrdm->pwrdm_clkdms[i] = clkdm;
+
+	ret = 0;
+
+pac_exit:
+	write_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+	return ret;
+}
+
+/**
+ * pwrdm_del_clkdm - remove a clockdomain from a powerdomain
+ * @pwrdm: struct powerdomain * to add the clockdomain to
+ * @clkdm: struct clockdomain * to associate with a powerdomain
+ *
+ * Dissociate the clockdomain 'clkdm' from the powerdomain
+ * 'pwrdm'. Returns -EINVAL if presented with invalid pointers;
+ * -ENOENT if the clkdm was not associated with the powerdomain, or 0
+ * upon success.
+ */
+int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
+{
+	unsigned long flags;
+	int ret = -EINVAL;
+	int i;
+
+	if (!pwrdm || !clkdm)
+		return -EINVAL;
+
+	pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
+		 "%s\n", clkdm->name, pwrdm->name);
+
+	write_lock_irqsave(&pwrdm_rwlock, flags);
+
+	for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
+		if (pwrdm->pwrdm_clkdms[i] == clkdm)
+			break;
+
+	if (i == PWRDM_MAX_CLKDMS) {
+		pr_debug("powerdomain: clkdm %s not associated with pwrdm "
+			 "%s ?!\n", clkdm->name, pwrdm->name);
+		ret = -ENOENT;
+		goto pdc_exit;
+	}
+
+	pwrdm->pwrdm_clkdms[i] = NULL;
+
+	ret = 0;
+
+pdc_exit:
+	write_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+	return ret;
+}
+
+/**
+ * pwrdm_for_each_clkdm - call function on each clkdm in a pwrdm
+ * @pwrdm: struct powerdomain * to iterate over
+ * @fn: callback function *
+ *
+ * Call the supplied function for each clockdomain in the powerdomain
+ * 'pwrdm'.  The callback function can return anything but 0 to bail
+ * out early from the iterator.  The callback function is called with
+ * the pwrdm_rwlock held for reading, so no powerdomain structure
+ * manipulation functions should be called from the callback, although
+ * hardware powerdomain control functions are fine.  Returns -EINVAL
+ * if presented with invalid pointers; or passes along the last return
+ * value of the callback function, which should be 0 for success or
+ * anything else to indicate failure.
+ */
+int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
+			 int (*fn)(struct powerdomain *pwrdm,
+				   struct clockdomain *clkdm))
+{
+	unsigned long flags;
+	int ret = 0;
+	int i;
+
+	if (!fn)
+		return -EINVAL;
+
+	read_lock_irqsave(&pwrdm_rwlock, flags);
+
+	for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++)
+		ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
+
+	read_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+	return ret;
+}
+
+
+/**
+ * pwrdm_add_wkdep - add a wakeup dependency from pwrdm2 to pwrdm1
+ * @pwrdm1: wake this struct powerdomain * up (dependent)
+ * @pwrdm2: when this struct powerdomain * wakes up (source)
+ *
+ * When the powerdomain represented by pwrdm2 wakes up (due to an
+ * interrupt), wake up pwrdm1.	Implemented in hardware on the OMAP,
+ * this feature is designed to reduce wakeup latency of the dependent
+ * powerdomain.  Returns -EINVAL if presented with invalid powerdomain
+ * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or
+ * 0 upon success.
+ */
+int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+	struct powerdomain *p;
+
+	if (!pwrdm1)
+		return -EINVAL;
+
+	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
+	if (IS_ERR(p)) {
+		pr_debug("powerdomain: hardware cannot set/clear wake up of "
+			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
+		return IS_ERR(p);
+	}
+
+	pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n",
+		 pwrdm1->name, pwrdm2->name);
+
+	prm_set_mod_reg_bits((1 << pwrdm2->dep_bit),
+			     pwrdm1->prcm_offs, PM_WKDEP);
+
+	return 0;
+}
+
+/**
+ * pwrdm_del_wkdep - remove a wakeup dependency from pwrdm2 to pwrdm1
+ * @pwrdm1: wake this struct powerdomain * up (dependent)
+ * @pwrdm2: when this struct powerdomain * wakes up (source)
+ *
+ * Remove a wakeup dependency that causes pwrdm1 to wake up when pwrdm2
+ * wakes up.  Returns -EINVAL if presented with invalid powerdomain
+ * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or
+ * 0 upon success.
+ */
+int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+	struct powerdomain *p;
+
+	if (!pwrdm1)
+		return -EINVAL;
+
+	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
+	if (IS_ERR(p)) {
+		pr_debug("powerdomain: hardware cannot set/clear wake up of "
+			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
+		return IS_ERR(p);
+	}
+
+	pr_debug("powerdomain: hardware will no longer wake up %s after %s "
+		 "wakes up\n", pwrdm1->name, pwrdm2->name);
+
+	prm_clear_mod_reg_bits((1 << pwrdm2->dep_bit),
+			       pwrdm1->prcm_offs, PM_WKDEP);
+
+	return 0;
+}
+
+/**
+ * pwrdm_read_wkdep - read wakeup dependency state from pwrdm2 to pwrdm1
+ * @pwrdm1: wake this struct powerdomain * up (dependent)
+ * @pwrdm2: when this struct powerdomain * wakes up (source)
+ *
+ * Return 1 if a hardware wakeup dependency exists wherein pwrdm1 will be
+ * awoken when pwrdm2 wakes up; 0 if dependency is not set; -EINVAL
+ * if either powerdomain pointer is invalid; or -ENOENT if the hardware
+ * is incapable.
+ *
+ * REVISIT: Currently this function only represents software-controllable
+ * wakeup dependencies.  Wakeup dependencies fixed in hardware are not
+ * yet handled here.
+ */
+int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+	struct powerdomain *p;
+
+	if (!pwrdm1)
+		return -EINVAL;
+
+	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
+	if (IS_ERR(p)) {
+		pr_debug("powerdomain: hardware cannot set/clear wake up of "
+			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
+		return IS_ERR(p);
+	}
+
+	return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP,
+					(1 << pwrdm2->dep_bit));
+}
+
+/**
+ * pwrdm_add_sleepdep - add a sleep dependency from pwrdm2 to pwrdm1
+ * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
+ * @pwrdm2: when this struct powerdomain * is active (source)
+ *
+ * Prevent pwrdm1 from automatically going inactive (and then to
+ * retention or off) if pwrdm2 is still active.	 Returns -EINVAL if
+ * presented with invalid powerdomain pointers or called on a machine
+ * that does not support software-configurable hardware sleep dependencies,
+ * -ENOENT if the specified dependency cannot be set in hardware, or
+ * 0 upon success.
+ */
+int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+	struct powerdomain *p;
+
+	if (!pwrdm1)
+		return -EINVAL;
+
+	if (!cpu_is_omap34xx())
+		return -EINVAL;
+
+	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
+	if (IS_ERR(p)) {
+		pr_debug("powerdomain: hardware cannot set/clear sleep "
+			 "dependency affecting %s from %s\n", pwrdm1->name,
+			 pwrdm2->name);
+		return IS_ERR(p);
+	}
+
+	pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n",
+		 pwrdm1->name, pwrdm2->name);
+
+	cm_set_mod_reg_bits((1 << pwrdm2->dep_bit),
+			    pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP);
+
+	return 0;
+}
+
+/**
+ * pwrdm_del_sleepdep - remove a sleep dependency from pwrdm2 to pwrdm1
+ * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
+ * @pwrdm2: when this struct powerdomain * is active (source)
+ *
+ * Allow pwrdm1 to automatically go inactive (and then to retention or
+ * off), independent of the activity state of pwrdm2.  Returns -EINVAL
+ * if presented with invalid powerdomain pointers or called on a machine
+ * that does not support software-configurable hardware sleep dependencies,
+ * -ENOENT if the specified dependency cannot be cleared in hardware, or
+ * 0 upon success.
+ */
+int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+	struct powerdomain *p;
+
+	if (!pwrdm1)
+		return -EINVAL;
+
+	if (!cpu_is_omap34xx())
+		return -EINVAL;
+
+	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
+	if (IS_ERR(p)) {
+		pr_debug("powerdomain: hardware cannot set/clear sleep "
+			 "dependency affecting %s from %s\n", pwrdm1->name,
+			 pwrdm2->name);
+		return IS_ERR(p);
+	}
+
+	pr_debug("powerdomain: will no longer prevent %s from sleeping if "
+		 "%s is active\n", pwrdm1->name, pwrdm2->name);
+
+	cm_clear_mod_reg_bits((1 << pwrdm2->dep_bit),
+			      pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP);
+
+	return 0;
+}
+
+/**
+ * pwrdm_read_sleepdep - read sleep dependency state from pwrdm2 to pwrdm1
+ * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
+ * @pwrdm2: when this struct powerdomain * is active (source)
+ *
+ * Return 1 if a hardware sleep dependency exists wherein pwrdm1 will
+ * not be allowed to automatically go inactive if pwrdm2 is active;
+ * 0 if pwrdm1's automatic power state inactivity transition is independent
+ * of pwrdm2's; -EINVAL if either powerdomain pointer is invalid or called
+ * on a machine that does not support software-configurable hardware sleep
+ * dependencies; or -ENOENT if the hardware is incapable.
+ *
+ * REVISIT: Currently this function only represents software-controllable
+ * sleep dependencies.	Sleep dependencies fixed in hardware are not
+ * yet handled here.
+ */
+int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+	struct powerdomain *p;
+
+	if (!pwrdm1)
+		return -EINVAL;
+
+	if (!cpu_is_omap34xx())
+		return -EINVAL;
+
+	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
+	if (IS_ERR(p)) {
+		pr_debug("powerdomain: hardware cannot set/clear sleep "
+			 "dependency affecting %s from %s\n", pwrdm1->name,
+			 pwrdm2->name);
+		return IS_ERR(p);
+	}
+
+	return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP,
+					(1 << pwrdm2->dep_bit));
+}
+
+/**
+ * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
+ * @pwrdm: struct powerdomain *
+ *
+ * Return the number of controllable memory banks in powerdomain pwrdm,
+ * starting with 1.  Returns -EINVAL if the powerdomain pointer is null.
+ */
+int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	return pwrdm->banks;
+}
+
+/**
+ * pwrdm_set_next_pwrst - set next powerdomain power state
+ * @pwrdm: struct powerdomain * to set
+ * @pwrst: one of the PWRDM_POWER_* macros
+ *
+ * Set the powerdomain pwrdm's next power state to pwrst.  The powerdomain
+ * may not enter this state immediately if the preconditions for this state
+ * have not been satisfied.  Returns -EINVAL if the powerdomain pointer is
+ * null or if the power state is invalid for the powerdomin, or returns 0
+ * upon success.
+ */
+int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (!(pwrdm->pwrsts & (1 << pwrst)))
+		return -EINVAL;
+
+	pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
+		 pwrdm->name, pwrst);
+
+	prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+			     (pwrst << OMAP_POWERSTATE_SHIFT),
+			     pwrdm->prcm_offs, PM_PWSTCTRL);
+
+	return 0;
+}
+
+/**
+ * pwrdm_read_next_pwrst - get next powerdomain power state
+ * @pwrdm: struct powerdomain * to get power state
+ *
+ * Return the powerdomain pwrdm's next power state.  Returns -EINVAL
+ * if the powerdomain pointer is null or returns the next power state
+ * upon success.
+ */
+int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTCTRL,
+					OMAP_POWERSTATE_MASK);
+}
+
+/**
+ * pwrdm_read_pwrst - get current powerdomain power state
+ * @pwrdm: struct powerdomain * to get power state
+ *
+ * Return the powerdomain pwrdm's current power state.	Returns -EINVAL
+ * if the powerdomain pointer is null or returns the current power state
+ * upon success.
+ */
+int pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST,
+					OMAP_POWERSTATEST_MASK);
+}
+
+/**
+ * pwrdm_read_prev_pwrst - get previous powerdomain power state
+ * @pwrdm: struct powerdomain * to get previous power state
+ *
+ * Return the powerdomain pwrdm's previous power state.  Returns -EINVAL
+ * if the powerdomain pointer is null or returns the previous power state
+ * upon success.
+ */
+int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
+					OMAP3430_LASTPOWERSTATEENTERED_MASK);
+}
+
+/**
+ * pwrdm_set_logic_retst - set powerdomain logic power state upon retention
+ * @pwrdm: struct powerdomain * to set
+ * @pwrst: one of the PWRDM_POWER_* macros
+ *
+ * Set the next power state that the logic portion of the powerdomain
+ * pwrdm will enter when the powerdomain enters retention.  This will
+ * be either RETENTION or OFF, if supported.  Returns -EINVAL if the
+ * powerdomain pointer is null or the target power state is not not
+ * supported, or returns 0 upon success.
+ */
+int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst)))
+		return -EINVAL;
+
+	pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n",
+		 pwrdm->name, pwrst);
+
+	/*
+	 * The register bit names below may not correspond to the
+	 * actual names of the bits in each powerdomain's register,
+	 * but the type of value returned is the same for each
+	 * powerdomain.
+	 */
+	prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE,
+			     (pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE)),
+			     pwrdm->prcm_offs, PM_PWSTCTRL);
+
+	return 0;
+}
+
+/**
+ * pwrdm_set_mem_onst - set memory power state while powerdomain ON
+ * @pwrdm: struct powerdomain * to set
+ * @bank: memory bank number to set (0-3)
+ * @pwrst: one of the PWRDM_POWER_* macros
+ *
+ * Set the next power state that memory bank x of the powerdomain
+ * pwrdm will enter when the powerdomain enters the ON state.  Bank
+ * will be a number from 0 to 3, and represents different types of
+ * memory, depending on the powerdomain.  Returns -EINVAL if the
+ * powerdomain pointer is null or the target power state is not not
+ * supported for this memory bank, -EEXIST if the target memory bank
+ * does not exist or is not controllable, or returns 0 upon success.
+ */
+int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
+{
+	u32 m;
+
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (pwrdm->banks < (bank + 1))
+		return -EEXIST;
+
+	if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst)))
+		return -EINVAL;
+
+	pr_debug("powerdomain: setting next memory powerstate for domain %s "
+		 "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst);
+
+	/*
+	 * The register bit names below may not correspond to the
+	 * actual names of the bits in each powerdomain's register,
+	 * but the type of value returned is the same for each
+	 * powerdomain.
+	 */
+	switch (bank) {
+	case 0:
+		m = OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK;
+		break;
+	case 1:
+		m = OMAP3430_L1FLATMEMONSTATE_MASK;
+		break;
+	case 2:
+		m = OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK;
+		break;
+	case 3:
+		m = OMAP3430_L2FLATMEMONSTATE_MASK;
+		break;
+	default:
+		WARN_ON(1); /* should never happen */
+		return -EEXIST;
+	}
+
+	prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)),
+			     pwrdm->prcm_offs, PM_PWSTCTRL);
+
+	return 0;
+}
+
+/**
+ * pwrdm_set_mem_retst - set memory power state while powerdomain in RET
+ * @pwrdm: struct powerdomain * to set
+ * @bank: memory bank number to set (0-3)
+ * @pwrst: one of the PWRDM_POWER_* macros
+ *
+ * Set the next power state that memory bank x of the powerdomain
+ * pwrdm will enter when the powerdomain enters the RETENTION state.
+ * Bank will be a number from 0 to 3, and represents different types
+ * of memory, depending on the powerdomain.  pwrst will be either
+ * RETENTION or OFF, if supported. Returns -EINVAL if the powerdomain
+ * pointer is null or the target power state is not not supported for
+ * this memory bank, -EEXIST if the target memory bank does not exist
+ * or is not controllable, or returns 0 upon success.
+ */
+int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
+{
+	u32 m;
+
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (pwrdm->banks < (bank + 1))
+		return -EEXIST;
+
+	if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst)))
+		return -EINVAL;
+
+	pr_debug("powerdomain: setting next memory powerstate for domain %s "
+		 "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst);
+
+	/*
+	 * The register bit names below may not correspond to the
+	 * actual names of the bits in each powerdomain's register,
+	 * but the type of value returned is the same for each
+	 * powerdomain.
+	 */
+	switch (bank) {
+	case 0:
+		m = OMAP3430_SHAREDL1CACHEFLATRETSTATE;
+		break;
+	case 1:
+		m = OMAP3430_L1FLATMEMRETSTATE;
+		break;
+	case 2:
+		m = OMAP3430_SHAREDL2CACHEFLATRETSTATE;
+		break;
+	case 3:
+		m = OMAP3430_L2FLATMEMRETSTATE;
+		break;
+	default:
+		WARN_ON(1); /* should never happen */
+		return -EEXIST;
+	}
+
+	prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+			     PM_PWSTCTRL);
+
+	return 0;
+}
+
+/**
+ * pwrdm_read_logic_pwrst - get current powerdomain logic retention power state
+ * @pwrdm: struct powerdomain * to get current logic retention power state
+ *
+ * Return the current power state that the logic portion of
+ * powerdomain pwrdm will enter
+ * Returns -EINVAL if the powerdomain pointer is null or returns the
+ * current logic retention power state upon success.
+ */
+int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST,
+					OMAP3430_LOGICSTATEST);
+}
+
+/**
+ * pwrdm_read_prev_logic_pwrst - get previous powerdomain logic power state
+ * @pwrdm: struct powerdomain * to get previous logic power state
+ *
+ * Return the powerdomain pwrdm's logic power state.  Returns -EINVAL
+ * if the powerdomain pointer is null or returns the previous logic
+ * power state upon success.
+ */
+int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	/*
+	 * The register bit names below may not correspond to the
+	 * actual names of the bits in each powerdomain's register,
+	 * but the type of value returned is the same for each
+	 * powerdomain.
+	 */
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
+					OMAP3430_LASTLOGICSTATEENTERED);
+}
+
+/**
+ * pwrdm_read_mem_pwrst - get current memory bank power state
+ * @pwrdm: struct powerdomain * to get current memory bank power state
+ * @bank: memory bank number (0-3)
+ *
+ * Return the powerdomain pwrdm's current memory power state for bank
+ * x.  Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
+ * the target memory bank does not exist or is not controllable, or
+ * returns the current memory power state upon success.
+ */
+int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m;
+
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (pwrdm->banks < (bank + 1))
+		return -EEXIST;
+
+	/*
+	 * The register bit names below may not correspond to the
+	 * actual names of the bits in each powerdomain's register,
+	 * but the type of value returned is the same for each
+	 * powerdomain.
+	 */
+	switch (bank) {
+	case 0:
+		m = OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK;
+		break;
+	case 1:
+		m = OMAP3430_L1FLATMEMSTATEST_MASK;
+		break;
+	case 2:
+		m = OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK;
+		break;
+	case 3:
+		m = OMAP3430_L2FLATMEMSTATEST_MASK;
+		break;
+	default:
+		WARN_ON(1); /* should never happen */
+		return -EEXIST;
+	}
+
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST, m);
+}
+
+/**
+ * pwrdm_read_prev_mem_pwrst - get previous memory bank power state
+ * @pwrdm: struct powerdomain * to get previous memory bank power state
+ * @bank: memory bank number (0-3)
+ *
+ * Return the powerdomain pwrdm's previous memory power state for bank
+ * x.  Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
+ * the target memory bank does not exist or is not controllable, or
+ * returns the previous memory power state upon success.
+ */
+int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m;
+
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (pwrdm->banks < (bank + 1))
+		return -EEXIST;
+
+	/*
+	 * The register bit names below may not correspond to the
+	 * actual names of the bits in each powerdomain's register,
+	 * but the type of value returned is the same for each
+	 * powerdomain.
+	 */
+	switch (bank) {
+	case 0:
+		m = OMAP3430_LASTMEM1STATEENTERED_MASK;
+		break;
+	case 1:
+		m = OMAP3430_LASTMEM2STATEENTERED_MASK;
+		break;
+	case 2:
+		m = OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
+		break;
+	case 3:
+		m = OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
+		break;
+	default:
+		WARN_ON(1); /* should never happen */
+		return -EEXIST;
+	}
+
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					OMAP3430_PM_PREPWSTST, m);
+}
+
+/**
+ * pwrdm_clear_all_prev_pwrst - clear previous powerstate register for a pwrdm
+ * @pwrdm: struct powerdomain * to clear
+ *
+ * Clear the powerdomain's previous power state register.  Clears the
+ * entire register, including logic and memory bank previous power states.
+ * Returns -EINVAL if the powerdomain pointer is null, or returns 0 upon
+ * success.
+ */
+int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	/*
+	 * XXX should get the powerdomain's current state here;
+	 * warn & fail if it is not ON.
+	 */
+
+	pr_debug("powerdomain: clearing previous power state reg for %s\n",
+		 pwrdm->name);
+
+	prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
+
+	return 0;
+}
+
+/**
+ * pwrdm_enable_hdwr_sar - enable automatic hardware SAR for a pwrdm
+ * @pwrdm: struct powerdomain *
+ *
+ * Enable automatic context save-and-restore upon power state change
+ * for some devices in a powerdomain.  Warning: this only affects a
+ * subset of devices in a powerdomain; check the TRM closely.  Returns
+ * -EINVAL if the powerdomain pointer is null or if the powerdomain
+ * does not support automatic save-and-restore, or returns 0 upon
+ * success.
+ */
+int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
+		return -EINVAL;
+
+	pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n",
+		 pwrdm->name);
+
+	prm_rmw_mod_reg_bits(0, 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+			     pwrdm->prcm_offs, PM_PWSTCTRL);
+
+	return 0;
+}
+
+/**
+ * pwrdm_disable_hdwr_sar - disable automatic hardware SAR for a pwrdm
+ * @pwrdm: struct powerdomain *
+ *
+ * Disable automatic context save-and-restore upon power state change
+ * for some devices in a powerdomain.  Warning: this only affects a
+ * subset of devices in a powerdomain; check the TRM closely.  Returns
+ * -EINVAL if the powerdomain pointer is null or if the powerdomain
+ * does not support automatic save-and-restore, or returns 0 upon
+ * success.
+ */
+int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
+		return -EINVAL;
+
+	pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n",
+		 pwrdm->name);
+
+	prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, 0,
+			     pwrdm->prcm_offs, PM_PWSTCTRL);
+
+	return 0;
+}
+
+/**
+ * pwrdm_has_hdwr_sar - test whether powerdomain supports hardware SAR
+ * @pwrdm: struct powerdomain *
+ *
+ * Returns 1 if powerdomain 'pwrdm' supports hardware save-and-restore
+ * for some devices, or 0 if it does not.
+ */
+bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
+{
+	return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0;
+}
+
+/**
+ * pwrdm_wait_transition - wait for powerdomain power transition to finish
+ * @pwrdm: struct powerdomain * to wait for
+ *
+ * If the powerdomain pwrdm is in the process of a state transition,
+ * spin until it completes the power transition, or until an iteration
+ * bailout value is reached. Returns -EINVAL if the powerdomain
+ * pointer is null, -EAGAIN if the bailout value was reached, or
+ * returns 0 upon success.
+ */
+int pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+	u32 c = 0;
+
+	if (!pwrdm)
+		return -EINVAL;
+
+	/*
+	 * REVISIT: pwrdm_wait_transition() may be better implemented
+	 * via a callback and a periodic timer check -- how long do we expect
+	 * powerdomain transitions to take?
+	 */
+
+	/* XXX Is this udelay() value meaningful? */
+	while ((prm_read_mod_reg(pwrdm->prcm_offs, PM_PWSTST) &
+		OMAP_INTRANSITION) &&
+	       (c++ < PWRDM_TRANSITION_BAILOUT))
+		udelay(1);
+
+	if (c >= PWRDM_TRANSITION_BAILOUT) {
+		printk(KERN_ERR "powerdomain: waited too long for "
+		       "powerdomain %s to complete transition\n", pwrdm->name);
+		return -EAGAIN;
+	}
+
+	pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+	return 0;
+}
+
+
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
new file mode 100644
index 0000000..1e151fa
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -0,0 +1,187 @@
+/*
+ * OMAP2/3 common powerdomain definitions
+ *
+ * Copyright (C) 2007-8 Texas Instruments, Inc.
+ * Copyright (C) 2007-8 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Debugging and integration fixes by Jouni Högander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS
+#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS
+
+/*
+ * This file contains all of the powerdomains that have some element
+ * of software control for the OMAP24xx and OMAP34XX chips.
+ *
+ * A few notes:
+ *
+ * This is not an exhaustive listing of powerdomains on the chips; only
+ * powerdomains that can be controlled in software.
+ *
+ * A useful validation rule for struct powerdomain:
+ * Any powerdomain referenced by a wkdep_srcs or sleepdep_srcs array
+ * must have a dep_bit assigned.  So wkdep_srcs/sleepdep_srcs are really
+ * just software-controllable dependencies.  Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ */
+
+/*
+ * The names for the DSP/IVA2 powerdomains are confusing.
+ *
+ * Most OMAP chips have an on-board DSP.
+ *
+ * On the 2420, this is a 'C55 DSP called, simply, the DSP.  Its
+ * powerdomain is called the "DSP power domain."  On the 2430, the
+ * on-board DSP is a 'C64 DSP, now called the IVA2 or IVA2.1.  Its
+ * powerdomain is still called the "DSP power domain."	On the 3430,
+ * the DSP is a 'C64 DSP like the 2430, also known as the IVA2; but
+ * its powerdomain is now called the "IVA2 power domain."
+ *
+ * The 2420 also has something called the IVA, which is a separate ARM
+ * core, and has nothing to do with the DSP/IVA2.
+ *
+ * Ideally the DSP/IVA2 could just be the same powerdomain, but the PRCM
+ * address offset is different between the C55 and C64 DSPs.
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ */
+
+/*
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+#include <mach/powerdomain.h>
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "cm.h"
+
+/* OMAP2/3-common powerdomains and wakeup dependencies */
+
+/*
+ * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ */
+static struct pwrdm_dep gfx_sgx_wkdeps[] = {
+	{
+		.pwrdm_name = "core_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.pwrdm_name = "iva2_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "mpu_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+					    CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "wkup_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+					    CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/*
+ * 3430: CM_SLEEPDEP_CAM: MPU
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ */
+static struct pwrdm_dep cam_gfx_sleepdeps[] = {
+	{
+		.pwrdm_name = "mpu_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+
+#include "powerdomains24xx.h"
+#include "powerdomains34xx.h"
+
+
+/*
+ * OMAP2/3 common powerdomains
+ */
+
+/*
+ * The GFX powerdomain is not present on 3430ES2, but currently we do not
+ * have a macro to filter it out at compile-time.
+ */
+static struct powerdomain gfx_pwrdm = {
+	.name		  = "gfx_pwrdm",
+	.prcm_offs	  = GFX_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+					   CHIP_IS_OMAP3430ES1),
+	.wkdep_srcs	  = gfx_sgx_wkdeps,
+	.sleepdep_srcs	  = cam_gfx_sleepdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+static struct powerdomain wkup_pwrdm = {
+	.name		= "wkup_pwrdm",
+	.prcm_offs	= WKUP_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+	.dep_bit	= OMAP_EN_WKUP_SHIFT,
+};
+
+
+
+/* As powerdomains are added or removed above, this list must also be changed */
+static struct powerdomain *powerdomains_omap[] __initdata = {
+
+	&gfx_pwrdm,
+	&wkup_pwrdm,
+
+#ifdef CONFIG_ARCH_OMAP24XX
+	&dsp_pwrdm,
+	&mpu_24xx_pwrdm,
+	&core_24xx_pwrdm,
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+	&mdm_pwrdm,
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+	&iva2_pwrdm,
+	&mpu_34xx_pwrdm,
+	&neon_pwrdm,
+	&core_34xx_pwrdm,
+	&cam_pwrdm,
+	&dss_pwrdm,
+	&per_pwrdm,
+	&emu_pwrdm,
+	&sgx_pwrdm,
+	&usbhost_pwrdm,
+#endif
+
+	NULL
+};
+
+
+#endif
diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h
new file mode 100644
index 0000000..9f08dc3
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains24xx.h
@@ -0,0 +1,200 @@
+/*
+ * OMAP24XX powerdomain definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Debugging and integration fixes by Jouni Högander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS24XX
+#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS24XX
+
+/*
+ * N.B. If powerdomains are added or removed from this file, update
+ * the array in mach-omap2/powerdomains.h.
+ */
+
+#include <mach/powerdomain.h>
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* 24XX powerdomains and dependencies */
+
+#ifdef CONFIG_ARCH_OMAP24XX
+
+
+/* Wakeup dependency source arrays */
+
+/*
+ * 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP
+ * 2430 PM_WKDEP_MDM: same as above
+ */
+static struct pwrdm_dep dsp_mdm_24xx_wkdeps[] = {
+	{
+		.pwrdm_name = "core_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.pwrdm_name = "mpu_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.pwrdm_name = "wkup_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{ NULL },
+};
+
+/*
+ * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
+ * 2430 adds MDM
+ */
+static struct pwrdm_dep mpu_24xx_wkdeps[] = {
+	{
+		.pwrdm_name = "core_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.pwrdm_name = "dsp_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.pwrdm_name = "wkup_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.pwrdm_name = "mdm_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	},
+	{ NULL },
+};
+
+/*
+ * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
+ * 2430 adds MDM
+ */
+static struct pwrdm_dep core_24xx_wkdeps[] = {
+	{
+		.pwrdm_name = "dsp_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.pwrdm_name = "gfx_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.pwrdm_name = "mpu_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.pwrdm_name = "wkup_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.pwrdm_name = "mdm_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	},
+	{ NULL },
+};
+
+
+/* Powerdomains */
+
+static struct powerdomain dsp_pwrdm = {
+	.name		  = "dsp_pwrdm",
+	.prcm_offs	  = OMAP24XX_DSP_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.dep_bit	  = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+	.wkdep_srcs	  = dsp_mdm_24xx_wkdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET,
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,
+	},
+};
+
+static struct powerdomain mpu_24xx_pwrdm = {
+	.name		  = "mpu_pwrdm",
+	.prcm_offs	  = MPU_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.dep_bit	  = OMAP24XX_EN_MPU_SHIFT,
+	.wkdep_srcs	  = mpu_24xx_wkdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET,
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,
+	},
+};
+
+static struct powerdomain core_24xx_pwrdm = {
+	.name		  = "core_pwrdm",
+	.prcm_offs	  = CORE_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.wkdep_srcs	  = core_24xx_wkdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.dep_bit	  = OMAP24XX_EN_CORE_SHIFT,
+	.banks		  = 3,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
+		[1] = PWRSTS_OFF_RET,	 /* MEM2RETSTATE */
+		[2] = PWRSTS_OFF_RET,	 /* MEM3RETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
+		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
+		[2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
+	},
+};
+
+#endif	   /* CONFIG_ARCH_OMAP24XX */
+
+
+
+/*
+ * 2430-specific powerdomains
+ */
+
+#ifdef CONFIG_ARCH_OMAP2430
+
+/* XXX 2430 KILLDOMAINWKUP bit?  No current users apparently */
+
+/* Another case of bit name collisions between several registers: EN_MDM */
+static struct powerdomain mdm_pwrdm = {
+	.name		  = "mdm_pwrdm",
+	.prcm_offs	  = OMAP2430_MDM_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+	.dep_bit	  = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+	.wkdep_srcs	  = dsp_mdm_24xx_wkdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+#endif     /* CONFIG_ARCH_OMAP2430 */
+
+
+#endif
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
new file mode 100644
index 0000000..f573f71
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -0,0 +1,327 @@
+/*
+ * OMAP34XX powerdomain definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Debugging and integration fixes by Jouni Högander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS34XX
+#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS34XX
+
+/*
+ * N.B. If powerdomains are added or removed from this file, update
+ * the array in mach-omap2/powerdomains.h.
+ */
+
+#include <mach/powerdomain.h>
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * 34XX-specific powerdomains, dependencies
+ */
+
+#ifdef CONFIG_ARCH_OMAP34XX
+
+/*
+ * 3430: PM_WKDEP_{PER,USBHOST}: CORE, IVA2, MPU, WKUP
+ * (USBHOST is ES2 only)
+ */
+static struct pwrdm_dep per_usbhost_wkdeps[] = {
+	{
+		.pwrdm_name = "core_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "iva2_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "mpu_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "wkup_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/*
+ * 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER
+ */
+static struct pwrdm_dep mpu_34xx_wkdeps[] = {
+	{
+		.pwrdm_name = "core_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "iva2_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "dss_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "per_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/*
+ * 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER
+ */
+static struct pwrdm_dep iva2_wkdeps[] = {
+	{
+		.pwrdm_name = "core_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "mpu_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "wkup_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "dss_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "per_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+
+/* 3430 PM_WKDEP_{CAM,DSS}: IVA2, MPU, WKUP */
+static struct pwrdm_dep cam_dss_wkdeps[] = {
+	{
+		.pwrdm_name = "iva2_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "mpu_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "wkup_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct pwrdm_dep neon_wkdeps[] = {
+	{
+		.pwrdm_name = "mpu_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+
+/* Sleep dependency source arrays for 34xx-specific pwrdms - 34XX only */
+
+/*
+ * 3430: CM_SLEEPDEP_{DSS,PER}: MPU, IVA
+ * 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA
+ */
+static struct pwrdm_dep dss_per_usbhost_sleepdeps[] = {
+	{
+		.pwrdm_name = "mpu_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.pwrdm_name = "iva2_pwrdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+
+/*
+ * Powerdomains
+ */
+
+static struct powerdomain iva2_pwrdm = {
+	.name		  = "iva2_pwrdm",
+	.prcm_offs	  = OMAP3430_IVA2_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.dep_bit	  = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+	.wkdep_srcs	  = iva2_wkdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 4,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRSTS_OFF_RET,
+		[1] = PWRSTS_OFF_RET,
+		[2] = PWRSTS_OFF_RET,
+		[3] = PWRSTS_OFF_RET,
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,
+		[1] = PWRDM_POWER_ON,
+		[2] = PWRSTS_OFF_ON,
+		[3] = PWRDM_POWER_ON,
+	},
+};
+
+static struct powerdomain mpu_34xx_pwrdm = {
+	.name		  = "mpu_pwrdm",
+	.prcm_offs	  = MPU_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.dep_bit	  = OMAP3430_EN_MPU_SHIFT,
+	.wkdep_srcs	  = mpu_34xx_wkdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRSTS_OFF_RET,
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRSTS_OFF_ON,
+	},
+};
+
+/* No wkdeps or sleepdeps for 34xx core apparently */
+static struct powerdomain core_34xx_pwrdm = {
+	.name		  = "core_pwrdm",
+	.prcm_offs	  = CORE_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.dep_bit	  = OMAP3430_EN_CORE_SHIFT,
+	.banks		  = 2,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
+		[1] = PWRSTS_OFF_RET,	 /* MEM2RETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
+		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
+	},
+};
+
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct powerdomain dss_pwrdm = {
+	.name		  = "dss_pwrdm",
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.prcm_offs	  = OMAP3430_DSS_MOD,
+	.dep_bit	  = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+	.wkdep_srcs	  = cam_dss_wkdeps,
+	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+static struct powerdomain sgx_pwrdm = {
+	.name		  = "sgx_pwrdm",
+	.prcm_offs	  = OMAP3430ES2_SGX_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.wkdep_srcs	  = gfx_sgx_wkdeps,
+	.sleepdep_srcs	  = cam_gfx_sleepdeps,
+	/* XXX This is accurate for 3430 SGX, but what about GFX? */
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+static struct powerdomain cam_pwrdm = {
+	.name		  = "cam_pwrdm",
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.prcm_offs	  = OMAP3430_CAM_MOD,
+	.wkdep_srcs	  = cam_dss_wkdeps,
+	.sleepdep_srcs	  = cam_gfx_sleepdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+static struct powerdomain per_pwrdm = {
+	.name		  = "per_pwrdm",
+	.prcm_offs	  = OMAP3430_PER_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.dep_bit	  = OMAP3430_EN_PER_SHIFT,
+	.wkdep_srcs	  = per_usbhost_wkdeps,
+	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+static struct powerdomain emu_pwrdm = {
+	.name		= "emu_pwrdm",
+	.prcm_offs	= OMAP3430_EMU_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain neon_pwrdm = {
+	.name		  = "neon_pwrdm",
+	.prcm_offs	  = OMAP3430_NEON_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.wkdep_srcs	  = neon_wkdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+};
+
+static struct powerdomain usbhost_pwrdm = {
+	.name		  = "usbhost_pwrdm",
+	.prcm_offs	  = OMAP3430ES2_USBHOST_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.wkdep_srcs	  = per_usbhost_wkdeps,
+	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRDM_POWER_ON,  /* MEMONSTATE */
+	},
+};
+
+#endif    /* CONFIG_ARCH_OMAP34XX */
+
+
+#endif
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 54c32f4..4a32822 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -312,7 +312,8 @@
 #define OMAP3430_ST_GPT2				(1 << 3)
 
 /* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
-#define OMAP3430_EN_CORE				(1 << 0)
+#define OMAP3430_EN_CORE_SHIFT				0
+#define OMAP3430_EN_CORE_MASK				(1 << 0)
 
 #endif
 
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
index c6d17a3..4002051 100644
--- a/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -29,8 +29,10 @@
 #define OMAP24XX_WKUP1_EN				(1 << 0)
 
 /* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
-#define OMAP24XX_EN_MPU					(1 << 1)
-#define OMAP24XX_EN_CORE				(1 << 0)
+#define OMAP24XX_EN_MPU_SHIFT				1
+#define OMAP24XX_EN_MPU_MASK				(1 << 1)
+#define OMAP24XX_EN_CORE_SHIFT 				0
+#define OMAP24XX_EN_CORE_MASK				(1 << 0)
 
 /*
  * PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM
@@ -140,8 +142,10 @@
 /* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
 
 /* PM_WKDEP_MPU specific bits */
-#define OMAP2430_PM_WKDEP_MPU_EN_MDM			(1 << 5)
-#define OMAP24XX_PM_WKDEP_MPU_EN_DSP			(1 << 2)
+#define OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT		5
+#define OMAP2430_PM_WKDEP_MPU_EN_MDM_MASK		(1 << 5)
+#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT		2
+#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_MASK		(1 << 2)
 
 /* PM_EVGENCTRL_MPU specific bits */
 
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index b4686bc..5b5ecfe 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -68,7 +68,8 @@
 #define OMAP3430_VPINIDLE				(1 << 0)
 
 /* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
-#define OMAP3430_EN_PER					(1 << 7)
+#define OMAP3430_EN_PER_SHIFT				7
+#define OMAP3430_EN_PER_MASK				(1 << 7)
 
 /* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
 #define OMAP3430_MEMORYCHANGE				(1 << 3)
@@ -77,7 +78,7 @@
 #define OMAP3430_LOGICSTATEST				(1 << 2)
 
 /* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
-#define OMAP3430_LASTLOGICSTATEENTERED				(1 << 2)
+#define OMAP3430_LASTLOGICSTATEENTERED			(1 << 2)
 
 /*
  * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
@@ -278,8 +279,10 @@
 #define OMAP3430_EMULATION_MPU_RST			(1 << 11)
 
 /* PM_WKDEP_MPU specific bits */
-#define OMAP3430_PM_WKDEP_MPU_EN_DSS			(1 << 5)
-#define OMAP3430_PM_WKDEP_MPU_EN_IVA2			(1 << 2)
+#define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT		5
+#define OMAP3430_PM_WKDEP_MPU_EN_DSS_MASK		(1 << 5)
+#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT		2
+#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_MASK		(1 << 2)
 
 /* PM_EVGENCTRL_MPU */
 #define OMAP3430_OFFLOADMODE_SHIFT			3
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index bbf41fc..e4dc4b1 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -18,7 +18,7 @@
 
 #ifndef __ASSEMBLER__
 #define OMAP_PRM_REGADDR(module, reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
+			IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
 #else
 #define OMAP2420_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
@@ -305,7 +305,8 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
  * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
  *	 PM_WKDEP_PER
  */
-#define OMAP_EN_WKUP					(1 << 4)
+#define OMAP_EN_WKUP_SHIFT				4
+#define OMAP_EN_WKUP_MASK				(1 << 4)
 
 /*
  * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index adc8a26a..4dcf39c2 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -3,7 +3,7 @@
  *
  * OMAP2 serial support.
  *
- * Copyright (C) 2005 Nokia Corporation
+ * Copyright (C) 2005-2008 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *
  * Based off of arch/arm/mach-omap/omap1/serial.c
@@ -17,44 +17,39 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <mach/common.h>
 #include <mach/board.h>
 
-static struct clk * uart1_ick = NULL;
-static struct clk * uart1_fck = NULL;
-static struct clk * uart2_ick = NULL;
-static struct clk * uart2_fck = NULL;
-static struct clk * uart3_ick = NULL;
-static struct clk * uart3_fck = NULL;
+static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
+static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= (char *)IO_ADDRESS(OMAP_UART1_BASE),
-		.mapbase	= (unsigned long)OMAP_UART1_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
-		.membase	= (char *)IO_ADDRESS(OMAP_UART2_BASE),
-		.mapbase	= (unsigned long)OMAP_UART2_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
-		.membase	= (char *)IO_ADDRESS(OMAP_UART3_BASE),
-		.mapbase	= (unsigned long)OMAP_UART3_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
 		.flags		= 0
 	}
@@ -71,7 +66,7 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 				    int value)
 {
 	offset <<= p->regshift;
-	__raw_writeb(value, (unsigned long)(p->membase + offset));
+	__raw_writeb(value, p->membase + offset);
 }
 
 /*
@@ -87,10 +82,27 @@ static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
 	serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
 }
 
-void __init omap_serial_init()
+void omap_serial_enable_clocks(int enable)
+{
+	int i;
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		if (uart_ick[i] && uart_fck[i]) {
+			if (enable) {
+				clk_enable(uart_ick[i]);
+				clk_enable(uart_fck[i]);
+			} else {
+				clk_disable(uart_ick[i]);
+				clk_disable(uart_fck[i]);
+			}
+		}
+	}
+}
+
+void __init omap_serial_init(void)
 {
 	int i;
 	const struct omap_uart_config *info;
+	char name[16];
 
 	/*
 	 * Make sure the serial ports are muxed on at this point.
@@ -98,8 +110,7 @@ void __init omap_serial_init()
 	 * if not needed.
 	 */
 
-	info = omap_get_config(OMAP_TAG_UART,
-			       struct omap_uart_config);
+	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
 
 	if (info == NULL)
 		return;
@@ -108,58 +119,26 @@ void __init omap_serial_init()
 		struct plat_serial8250_port *p = serial_platform_data + i;
 
 		if (!(info->enabled_uarts & (1 << i))) {
-			p->membase = 0;
+			p->membase = NULL;
 			p->mapbase = 0;
 			continue;
 		}
 
-		switch (i) {
-		case 0:
-			uart1_ick = clk_get(NULL, "uart1_ick");
-			if (IS_ERR(uart1_ick))
-				printk("Could not get uart1_ick\n");
-			else {
-				clk_enable(uart1_ick);
-			}
-
-			uart1_fck = clk_get(NULL, "uart1_fck");
-			if (IS_ERR(uart1_fck))
-				printk("Could not get uart1_fck\n");
-			else {
-				clk_enable(uart1_fck);
-			}
-			break;
-		case 1:
-			uart2_ick = clk_get(NULL, "uart2_ick");
-			if (IS_ERR(uart2_ick))
-				printk("Could not get uart2_ick\n");
-			else {
-				clk_enable(uart2_ick);
-			}
-
-			uart2_fck = clk_get(NULL, "uart2_fck");
-			if (IS_ERR(uart2_fck))
-				printk("Could not get uart2_fck\n");
-			else {
-				clk_enable(uart2_fck);
-			}
-			break;
-		case 2:
-			uart3_ick = clk_get(NULL, "uart3_ick");
-			if (IS_ERR(uart3_ick))
-				printk("Could not get uart3_ick\n");
-			else {
-				clk_enable(uart3_ick);
-			}
-
-			uart3_fck = clk_get(NULL, "uart3_fck");
-			if (IS_ERR(uart3_fck))
-				printk("Could not get uart3_fck\n");
-			else {
-				clk_enable(uart3_fck);
-			}
-			break;
-		}
+		sprintf(name, "uart%d_ick", i+1);
+		uart_ick[i] = clk_get(NULL, name);
+		if (IS_ERR(uart_ick[i])) {
+			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
+			uart_ick[i] = NULL;
+		} else
+			clk_enable(uart_ick[i]);
+
+		sprintf(name, "uart%d_fck", i+1);
+		uart_fck[i] = clk_get(NULL, name);
+		if (IS_ERR(uart_fck[i])) {
+			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
+			uart_fck[i] = NULL;
+		} else
+			clk_enable(uart_fck[i]);
 
 		omap_serial_reset(p);
 	}
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
deleted file mode 100644
index 87a706f..0000000
--- a/arch/arm/mach-omap2/sleep.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/sleep.S
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/io.h>
-#include <mach/pm.h>
-
-#include "sdrc.h"
-
-/* First address of reserved address space?  apparently valid for OMAP2 & 3 */
-#define A_SDRC0_V		(0xC0000000)
-
-	.text
-
-/*
- * Forces OMAP into idle state
- *
- * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI
- * for normal idles.
- *
- * Note: This code get's copied to internal SRAM at boot. When the OMAP
- *	 wakes up it continues execution at the point it went to sleep.
- */
-ENTRY(omap24xx_idle_loop_suspend)
-	stmfd	sp!, {r0, lr}		@ save registers on stack
-	mov	r0, #0			@ clear for mcr setup
-	mcr	p15, 0, r0, c7, c0, 4	@ wait for interrupt
-	ldmfd	sp!, {r0, pc}		@ restore regs and return
-
-ENTRY(omap24xx_idle_loop_suspend_sz)
-	.word	. - omap24xx_idle_loop_suspend
-
-/*
- * omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing
- * SDRC shutdown then ARM shutdown.  Upon wake MPU is back on so just restore
- * SDRC.
- *
- * Input:
- * R0 :	DLL ctrl value pre-Sleep
- * R1 : Processor+Revision
- *	2420: 0x21 = 242xES1, 0x26 = 242xES2.2
- *	2430: 0x31 = 2430ES1, 0x32 = 2430ES2
- *
- * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
- * when we get called, but the DLL probably isn't.  We will wait a bit more in
- * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
- * if in unlocked mode.
- *
- * For less than 242x-ES2.2 upon wake from a sleep mode where the external
- * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
- * clock can pass into the PRCM can cause problems at DSP and IVA.
- * To work around this the code will switch to the 32kHz source prior to sleep.
- * Post sleep we will shift back to using the DPLL.  Apparently,
- * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
- * 3x12MHz + 3x32kHz clocks for a full switch.
- *
- * The DLL load value is not kept in RETENTION or OFF.	It needs to be restored
- * at wake
- */
-ENTRY(omap24xx_cpu_suspend)
-	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
-	mov	r3, #0x0		@ clear for mrc call
-	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, hope SDR/DDR finished
-	nop
-	nop
-	ldr	r3, A_SDRC_POWER	@ addr of sdrc power
-	ldr	r4, [r3]		@ value of sdrc power
-	orr	r4, r4, #0x40		@ enable self refresh on idle req
-	mov	r5, #0x2000		@ set delay (DPLL relock + DLL relock)
-	str	r4, [r3]		@ make it so
-	mov	r2, #0
-	nop
-	mcr	p15, 0, r2, c7, c0, 4	@ wait for interrupt
-	nop
-loop:
-	subs	r5, r5, #0x1		@ awake, wait just a bit
-	bne	loop
-
-	/* The DPLL has on before we take the DDR out of self refresh */
-	bic	r4, r4, #0x40		@ now clear self refresh bit.
-	str	r4, [r3]		@ put vlaue back.
-	ldr	r4, A_SDRC0		@ make a clock happen
-	ldr	r4, [r4]
-	nop				@ start auto refresh only after clk ok
-	movs	r0, r0			@ see if DDR or SDR
-	ldrne	r1, A_SDRC_DLLA_CTRL_S	@ get addr of DLL ctrl
-	strne	r0, [r1]		@ rewrite DLLA to force DLL reload
-	addne	r1, r1, #0x8		@ move to DLLB
-	strne	r0, [r1]		@ rewrite DLLB to force DLL reload
-
-	mov	r5, #0x1000
-loop2:
-	subs	r5, r5, #0x1
-	bne	loop2
-	/* resume*/
-	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
-
-A_SDRC_POWER:
-	.word OMAP242X_SDRC_REGADDR(SDRC_POWER)
-A_SDRC0:
-	.word A_SDRC0_V
-A_SDRC_DLLA_CTRL_S:
-	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-
-ENTRY(omap24xx_cpu_suspend_sz)
-	.word	. - omap24xx_cpu_suspend
-
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
new file mode 100644
index 0000000..43336b9
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * (C) Copyright 2006 Nokia Corporation
+ * Fixed idle loop sleep
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/pm.h>
+
+#include <mach/omap24xx.h>
+
+#include "sdrc.h"
+
+/* First address of reserved address space?  apparently valid for OMAP2 & 3 */
+#define A_SDRC0_V		(0xC0000000)
+
+	.text
+
+/*
+ * Forces OMAP into idle state
+ *
+ * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ *	 wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap24xx_idle_loop_suspend)
+	stmfd	sp!, {r0, lr}		@ save registers on stack
+	mov	r0, #0			@ clear for mcr setup
+	mcr	p15, 0, r0, c7, c0, 4	@ wait for interrupt
+	ldmfd	sp!, {r0, pc}		@ restore regs and return
+
+ENTRY(omap24xx_idle_loop_suspend_sz)
+	.word	. - omap24xx_idle_loop_suspend
+
+/*
+ * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
+ * SDRC shutdown then ARM shutdown.  Upon wake MPU is back on so just restore
+ * SDRC.
+ *
+ * Input:
+ * R0 :	DLL ctrl value pre-Sleep
+ * R1 : SDRC_DLLA_CTRL
+ * R2 : SDRC_POWER
+ *
+ * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
+ * when we get called, but the DLL probably isn't.  We will wait a bit more in
+ * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
+ * if in unlocked mode.
+ *
+ * For less than 242x-ES2.2 upon wake from a sleep mode where the external
+ * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
+ * clock can pass into the PRCM can cause problems at DSP and IVA.
+ * To work around this the code will switch to the 32kHz source prior to sleep.
+ * Post sleep we will shift back to using the DPLL.  Apparently,
+ * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
+ * 3x12MHz + 3x32kHz clocks for a full switch.
+ *
+ * The DLL load value is not kept in RETENTION or OFF.	It needs to be restored
+ * at wake
+ */
+ENTRY(omap24xx_cpu_suspend)
+	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
+	mov	r3, #0x0		@ clear for mcr call
+	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, hope SDR/DDR finished
+	nop
+	nop
+	ldr	r4, [r2]		@ read SDRC_POWER
+	orr	r4, r4, #0x40		@ enable self refresh on idle req
+	mov	r5, #0x2000		@ set delay (DPLL relock + DLL relock)
+	str	r4, [r2]		@ make it so
+	mov	r2, #0
+	nop
+	mcr	p15, 0, r2, c7, c0, 4	@ wait for interrupt
+	nop
+loop:
+	subs	r5, r5, #0x1		@ awake, wait just a bit
+	bne	loop
+
+	/* The DPLL has to be on before we take the DDR out of self refresh */
+	bic	r4, r4, #0x40		@ now clear self refresh bit.
+	str	r4, [r2]		@ write to SDRC_POWER
+	ldr	r4, A_SDRC0		@ make a clock happen
+	ldr	r4, [r4]		@ read A_SDRC0
+	nop				@ start auto refresh only after clk ok
+	movs	r0, r0			@ see if DDR or SDR
+	strne	r0, [r1]		@ rewrite DLLA to force DLL reload
+	addne	r1, r1, #0x8		@ move to DLLB
+	strne	r0, [r1]		@ rewrite DLLB to force DLL reload
+
+	mov	r5, #0x1000
+loop2:
+	subs	r5, r5, #0x1
+	bne	loop2
+	/* resume*/
+	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
+
+A_SDRC0:
+	.word A_SDRC0_V
+
+ENTRY(omap24xx_cpu_suspend_sz)
+	.word	. - omap24xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
new file mode 100644
index 0000000..2c71461
--- /dev/null
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -0,0 +1,179 @@
+/*
+ * linux/arch/arm/mach-omap3/sram.S
+ *
+ * Omap3 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2007
+ * Texas Instruments Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+
+#include <mach/io.h>
+
+#include "sdrc.h"
+#include "cm.h"
+
+	.text
+
+/*
+ * Change frequency of core dpll
+ * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ */
+ENTRY(omap3_sram_configure_core_dpll)
+	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
+	cmp	r3, #0x2
+	blne	configure_sdrc
+	cmp	r3, #0x2
+	blne	lock_dll
+	cmp	r3, #0x1
+	blne	unlock_dll
+	bl	sdram_in_selfrefresh	@ put the SDRAM in self refresh
+	bl 	configure_core_dpll
+	bl	enable_sdrc
+	cmp	r3, #0x1
+	blne	wait_dll_unlock
+	cmp	r3, #0x2
+	blne	wait_dll_lock
+	cmp	r3, #0x1
+	blne	configure_sdrc
+	mov 	r0, #0 			@ return value
+	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
+unlock_dll:
+	ldr	r4, omap3_sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	orr	r5, r5, #0x4
+	str	r5, [r4]
+	bx	lr
+lock_dll:
+	ldr	r4, omap3_sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	bic	r5, r5, #0x4
+	str	r5, [r4]
+	bx	lr
+sdram_in_selfrefresh:
+	mov	r5, #0x0		@ Move 0 to R5
+	mcr	p15, 0, r5, c7, c10, 5	@ memory barrier
+	ldr	r4, omap3_sdrc_power	@ read the SDRC_POWER register
+	ldr	r5, [r4]		@ read the contents of SDRC_POWER
+	orr 	r5, r5, #0x40		@ enable self refresh on idle req
+	str 	r5, [r4]		@ write back to SDRC_POWER register
+	ldr	r4, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
+	ldr	r5, [r4]
+	bic	r5, r5, #0x2		@ disable iclk bit for SRDC
+	str 	r5, [r4]
+wait_sdrc_idle:
+	ldr 	r4, omap3_cm_idlest1_core
+	ldr 	r5, [r4]
+	and 	r5, r5, #0x2		@ check for SDRC idle
+	cmp 	r5, #2
+	bne 	wait_sdrc_idle
+	bx 	lr
+configure_core_dpll:
+	ldr 	r4, omap3_cm_clksel1_pll
+	ldr	r5, [r4]
+	ldr	r6, core_m2_mask_val	@ modify m2 for core dpll
+	and	r5, r5, r6
+	orr	r5, r5, r3, lsl #0x1B	@ r3 contains the M2 val
+	str	r5, [r4]
+	mov 	r5, #0x800		@ wait for the clock to stabilise
+	cmp	r3, #2
+	bne	wait_clk_stable
+	bx	lr
+wait_clk_stable:
+	subs 	r5, r5, #1
+	bne	wait_clk_stable
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bx	lr
+enable_sdrc:
+	ldr 	r4, omap3_cm_iclken1_core
+	ldr	r5, [r4]
+	orr 	r5, r5, #0x2		@ enable iclk bit for SDRC
+	str 	r5, [r4]
+wait_sdrc_idle1:
+	ldr 	r4, omap3_cm_idlest1_core
+	ldr	r5, [r4]
+	and 	r5, r5, #0x2
+	cmp	r5, #0
+	bne	wait_sdrc_idle1
+	ldr	r4, omap3_sdrc_power
+	ldr	r5, [r4]
+	bic 	r5, r5, #0x40
+	str 	r5, [r4]
+	bx	lr
+wait_dll_lock:
+	ldr	r4, omap3_sdrc_dlla_status
+	ldr	r5, [r4]
+	and 	r5, r5, #0x4
+	cmp	r5, #0x4
+	bne	wait_dll_lock
+	bx	lr
+wait_dll_unlock:
+	ldr	r4, omap3_sdrc_dlla_status
+	ldr	r5, [r4]
+	and	r5, r5, #0x4
+	cmp	r5, #0x0
+	bne	wait_dll_unlock
+	bx	lr
+configure_sdrc:
+	ldr	r4, omap3_sdrc_rfr_ctrl
+	str	r0, [r4]
+	ldr	r4, omap3_sdrc_actim_ctrla
+	str	r1, [r4]
+	ldr	r4, omap3_sdrc_actim_ctrlb
+	str	r2, [r4]
+	bx	lr
+
+omap3_sdrc_power:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+omap3_cm_clksel1_pll:
+	.word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap3_cm_idlest1_core:
+	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
+omap3_cm_iclken1_core:
+	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
+omap3_sdrc_rfr_ctrl:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap3_sdrc_actim_ctrla:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
+omap3_sdrc_actim_ctrlb:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_dlla_status:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
+omap3_sdrc_dlla_ctrl:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
+core_m2_mask_val:
+	.word 0x07FFFFFF
+
+ENTRY(omap3_sram_configure_core_dpll_sz)
+	.word	. - omap3_sram_configure_core_dpll
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index ddcd41b..f59a8d0 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -36,6 +36,12 @@ config MACH_TS209
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-109/TS-209 platform.
 
+config MACH_TERASTATION_PRO2
+	bool "Buffalo Terastation Pro II/Live"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Terastation Pro II/Live platform.
+
 config MACH_LINKSTATION_PRO
 	bool "Buffalo Linkstation Pro/Live"
 	select I2C_BOARDINFO
@@ -44,6 +50,13 @@ config MACH_LINKSTATION_PRO
 	  Buffalo Linkstation Pro/Live platform. Both v1 and
 	  v2 devices are supported.
 
+config MACH_LINKSTATION_MINI
+	bool "Buffalo Linkstation Mini"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Linkstation Mini platform.
+
 config MACH_TS409
 	bool "QNAP TS-409"
 	help
@@ -68,6 +81,13 @@ config MACH_MV2120
 	  Say 'Y' here if you want your kernel to support the
 	  HP Media Vault mv2120 or mv5100.
 
+config MACH_EDMINI_V2
+	bool "LaCie Ethernet Disk mini V2"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Ethernet Disk mini V2.
+
 config MACH_MSS2
 	bool "Maxtor Shared Storage II"
 	help
@@ -92,6 +112,12 @@ config MACH_RD88F5181L_FXO
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-VoIP FXO (88F5181L) RD.
 
+config MACH_RD88F6183AP_GE
+	bool "Marvell Orion-1-90 AP GE Reference Design"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Orion-1-90 (88F6183) AP GE RD.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index fcc48a8..3d4a1bc 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -2,14 +2,18 @@ obj-y				+= common.o addr-map.o pci.o gpio.o irq.o mpp.o
 obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
 obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
+obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
+obj-$(CONFIG_MACH_EDMINI_V2)	+= edmini_v2-setup.o
 obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
+obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index bea3797..719957e 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -13,8 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 7b11e55..437065c 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -18,6 +18,8 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/timex.h>
@@ -146,7 +148,6 @@ void __init orion5x_ehci1_init(void)
  ****************************************************************************/
 struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
 	.dram		= &orion5x_mbus_dram_info,
-	.t_clk		= ORION5X_TCLK,
 };
 
 static struct resource orion5x_eth_shared_resources[] = {
@@ -154,6 +155,10 @@ static struct resource orion5x_eth_shared_resources[] = {
 		.start	= ORION5X_ETH_PHYS_BASE + 0x2000,
 		.end	= ORION5X_ETH_PHYS_BASE + 0x3fff,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_ORION5X_ETH_ERR,
+		.end	= IRQ_ORION5X_ETH_ERR,
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -163,7 +168,7 @@ static struct platform_device orion5x_eth_shared = {
 	.dev		= {
 		.platform_data	= &orion5x_eth_shared_data,
 	},
-	.num_resources	= 1,
+	.num_resources	= ARRAY_SIZE(orion5x_eth_shared_resources),
 	.resource	= orion5x_eth_shared_resources,
 };
 
@@ -194,6 +199,40 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 
 
 /*****************************************************************************
+ * Ethernet switch
+ ****************************************************************************/
+static struct resource orion5x_switch_resources[] = {
+	{
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_switch_device = {
+	.name		= "dsa",
+	.id		= 0,
+	.num_resources	= 0,
+	.resource	= orion5x_switch_resources,
+};
+
+void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
+{
+	if (irq != NO_IRQ) {
+		orion5x_switch_resources[0].start = irq;
+		orion5x_switch_resources[0].end = irq;
+		orion5x_switch_device.num_resources = 1;
+	}
+
+	d->mii_bus = &orion5x_eth_shared.dev;
+	d->netdev = &orion5x_eth.dev;
+	orion5x_switch_device.dev.platform_data = d;
+
+	platform_device_register(&orion5x_switch_device);
+}
+
+
+/*****************************************************************************
  * I2C
  ****************************************************************************/
 static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
@@ -268,6 +307,39 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
 
 
 /*****************************************************************************
+ * SPI
+ ****************************************************************************/
+static struct orion_spi_info orion5x_spi_plat_data = {
+	.tclk			= 0,
+	.enable_clock_fix	= 1,
+};
+
+static struct resource orion5x_spi_resources[] = {
+	{
+		.name	= "spi base",
+		.start	= SPI_PHYS_BASE,
+		.end	= SPI_PHYS_BASE + 0x1f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device orion5x_spi = {
+	.name		= "orion_spi",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &orion5x_spi_plat_data,
+	},
+	.num_resources	= ARRAY_SIZE(orion5x_spi_resources),
+	.resource	= orion5x_spi_resources,
+};
+
+void __init orion5x_spi_init()
+{
+	platform_device_register(&orion5x_spi);
+}
+
+
+/*****************************************************************************
  * UART0
  ****************************************************************************/
 static struct plat_serial8250_port orion5x_uart0_data[] = {
@@ -278,7 +350,7 @@ static struct plat_serial8250_port orion5x_uart0_data[] = {
 		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= ORION5X_TCLK,
+		.uartclk	= 0,
 	}, {
 	},
 };
@@ -322,7 +394,7 @@ static struct plat_serial8250_port orion5x_uart1_data[] = {
 		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= ORION5X_TCLK,
+		.uartclk	= 0,
 	}, {
 	},
 };
@@ -455,9 +527,24 @@ void __init orion5x_xor_init(void)
 /*****************************************************************************
  * Time handling
  ****************************************************************************/
+int orion5x_tclk;
+
+int __init orion5x_find_tclk(void)
+{
+	u32 dev, rev;
+
+	orion5x_pcie_id(&dev, &rev);
+	if (dev == MV88F6183_DEV_ID &&
+	    (readl(MPP_RESET_SAMPLE) & 0x00000200) == 0)
+		return 133333333;
+
+	return 166666667;
+}
+
 static void orion5x_timer_init(void)
 {
-	orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
+	orion5x_tclk = orion5x_find_tclk();
+	orion_time_init(IRQ_ORION5X_BRIDGE, orion5x_tclk);
 }
 
 struct sys_timer orion5x_timer = {
@@ -499,6 +586,12 @@ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
 		} else {
 			*dev_name = "MV88F5181(L)-Rev-Unsupported";
 		}
+	} else if (*dev == MV88F6183_DEV_ID) {
+		if (*rev == MV88F6183_REV_B0) {
+			*dev_name = "MV88F6183-Rev-B0";
+		} else {
+			*dev_name = "MV88F6183-Rev-Unsupported";
+		}
 	} else {
 		*dev_name = "Device-Unknown";
 	}
@@ -510,7 +603,12 @@ void __init orion5x_init(void)
 	u32 dev, rev;
 
 	orion5x_id(&dev, &rev, &dev_name);
-	printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION5X_TCLK);
+	printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
+
+	orion5x_eth_shared_data.t_clk = orion5x_tclk;
+	orion5x_spi_plat_data.tclk = orion5x_tclk;
+	orion5x_uart0_data[0].uartclk = orion5x_tclk;
+	orion5x_uart1_data[0].uartclk = orion5x_tclk;
 
 	/*
 	 * Setup Orion address map
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 0bd1955..a000c7c 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -1,6 +1,7 @@
 #ifndef __ARCH_ORION5X_COMMON_H
 #define __ARCH_ORION5X_COMMON_H
 
+struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
@@ -10,6 +11,7 @@ struct mv_sata_platform_data;
 void orion5x_map_io(void);
 void orion5x_init_irq(void);
 void orion5x_init(void);
+extern int orion5x_tclk;
 extern struct sys_timer orion5x_timer;
 
 /*
@@ -28,8 +30,10 @@ void orion5x_setup_pcie_wa_win(u32 base, u32 size);
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
+void orion5x_eth_switch_init(struct dsa_platform_data *d, int irq);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
+void orion5x_spi_init(void);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
 void orion5x_xor_init(void);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index ff13e90..d318bea 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -285,7 +285,7 @@ subsys_initcall(db88f5281_pci_init);
  * Ethernet
  ****************************************************************************/
 static struct mv643xx_eth_platform_data db88f5281_eth_data = {
-	.phy_addr	= 8,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
 /*****************************************************************************
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index b38c65c..3e66098 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -79,7 +79,7 @@ subsys_initcall(dns323_pci_init);
  */
 
 static struct mv643xx_eth_platform_data dns323_eth_data = {
-	.phy_addr = 8,
+	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
 };
 
 /****************************************************************************
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
new file mode 100644
index 0000000..b24ee0c
--- /dev/null
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -0,0 +1,262 @@
+/*
+ * arch/arm/mach-orion5x/edmini_v2-setup.c
+ *
+ * LaCie Ethernet Disk mini V2 Setup
+ *
+ * Copyright (C) 2008 Christopher Moore <moore@free.fr>
+ * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add Orion USB device port init when kernel.org support is added.
+ * TODO: add flash write support: see below.
+ * TODO: add power-off support.
+ * TODO: add I2C EEPROM support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * EDMINI_V2 Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define EDMINI_V2_NOR_BOOT_BASE		0xfff80000
+#define EDMINI_V2_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+/*
+ * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom
+ * -type device. This could cause risks of accidentally erasing critical
+ * flash sectors. We thus define a single, write-protected partition covering
+ * the whole flash.
+ * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD
+ * code, break this into at least three partitions: 'u-boot code', 'u-boot
+ * environment' and 'whatever is left'.
+ */
+
+static struct mtd_partition edmini_v2_partitions[] = {
+	{
+		.name		= "Full512kb",
+		.size		= 0x00080000,
+		.offset		= 0x00000000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data edmini_v2_nor_flash_data = {
+	.width		= 1,
+	.parts		= edmini_v2_partitions,
+	.nr_parts	= ARRAY_SIZE(edmini_v2_partitions),
+};
+
+static struct resource edmini_v2_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= EDMINI_V2_NOR_BOOT_BASE,
+	.end			= EDMINI_V2_NOR_BOOT_BASE
+		+ EDMINI_V2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device edmini_v2_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &edmini_v2_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &edmini_v2_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data edmini_v2_eth_data = {
+	.phy_addr	= 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+#define EDMINIV2_RTC_GPIO	3
+
+static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
+	I2C_BOARD_INFO("rs5c372a", 0x32),
+	.irq = 0,
+};
+
+/*****************************************************************************
+ * Sata
+ ****************************************************************************/
+
+static struct mv_sata_platform_data edmini_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * GPIO LED (simple - doesn't use hardware blinking support)
+ ****************************************************************************/
+
+#define EDMINI_V2_GPIO_LED_POWER	16
+
+static struct gpio_led edmini_v2_leds[] = {
+	{
+		.name = "power:blue",
+		.gpio = EDMINI_V2_GPIO_LED_POWER,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data edmini_v2_led_data = {
+	.num_leds = ARRAY_SIZE(edmini_v2_leds),
+	.leds = edmini_v2_leds,
+};
+
+static struct platform_device edmini_v2_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &edmini_v2_led_data,
+	},
+};
+
+/****************************************************************************
+ * GPIO key
+ ****************************************************************************/
+
+#define EDMINI_V2_GPIO_KEY_POWER	18
+
+static struct gpio_keys_button edmini_v2_buttons[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= EDMINI_V2_GPIO_KEY_POWER,
+		.desc		= "Power Button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data edmini_v2_button_data = {
+	.buttons	= edmini_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(edmini_v2_buttons),
+};
+
+static struct platform_device edmini_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &edmini_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode edminiv2_mpp_modes[] __initdata = {
+	{  0, MPP_UNUSED },
+	{  1, MPP_UNUSED },
+	{  2, MPP_UNUSED },
+	{  3, MPP_GPIO },	/* RTC interrupt */
+	{  4, MPP_UNUSED },
+	{  5, MPP_UNUSED },
+	{  6, MPP_UNUSED },
+	{  7, MPP_UNUSED },
+	{  8, MPP_UNUSED },
+	{  9, MPP_UNUSED },
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },	/* SATA 0 presence */
+	{ 13, MPP_SATA_LED },	/* SATA 1 presence */
+	{ 14, MPP_SATA_LED },	/* SATA 0 active */
+	{ 15, MPP_SATA_LED },	/* SATA 1 active */
+	/* 16: Power LED control (0 = On, 1 = Off) */
+	{ 16, MPP_GPIO },
+	/* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
+	{ 17, MPP_GPIO },
+	/* 18: Power button status (0 = Released, 1 = Pressed) */
+	{ 18, MPP_GPIO },
+	{ 19, MPP_UNUSED },
+	{ -1 }
+};
+
+static void __init edmini_v2_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(edminiv2_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&edmini_v2_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&edmini_v2_sata_data);
+	orion5x_uart0_init();
+
+	orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE,
+				EDMINI_V2_NOR_BOOT_SIZE);
+	platform_device_register(&edmini_v2_nor_flash);
+	platform_device_register(&edmini_v2_gpio_leds);
+	platform_device_register(&edmini_v2_gpio_buttons);
+
+	pr_notice("edmini_v2: USB device port, flash write and power-off "
+		  "are not yet supported.\n");
+
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0)
+			edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO);
+		else
+			gpio_free(EDMINIV2_RTC_GPIO);
+	}
+
+	if (edmini_v2_i2c_rtc.irq == 0)
+		pr_warning("edmini_v2: failed to get RTC IRQ\n");
+
+	i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
+	/* Maintainer: Christopher Moore <moore@free.fr> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= edmini_v2_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index cd8a16f..fc41986 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -15,8 +15,8 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
+#include <linux/io.h>
 #include <asm/gpio.h>
-#include <asm/io.h>
 #include <mach/orion5x.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 61eb74a..9f5ce1c 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -2,7 +2,7 @@
  * arch/arm/mach-orion5x/include/mach/orion5x.h
  *
  * Generic definitions of Orion SoC flavors:
- *  Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
+ *  Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
  *
@@ -76,6 +76,9 @@
 #define MV88F5281_REV_D0	4
 #define MV88F5281_REV_D1	5
 #define MV88F5281_REV_D2	6
+/* Orion-1-90 (88F6183) */
+#define MV88F6183_DEV_ID	0x6183
+#define MV88F6183_REV_B0	3
 
 /*******************************************************************************
  * Orion Registers Map
@@ -86,6 +89,7 @@
 #define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
 #define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
 #define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
 #define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
 #define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
 #define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
@@ -153,9 +157,11 @@
 #define CPU_CONF		ORION5X_BRIDGE_REG(0x100)
 #define CPU_CTRL		ORION5X_BRIDGE_REG(0x104)
 #define CPU_RESET_MASK		ORION5X_BRIDGE_REG(0x108)
+#define  WDT_RESET		0x0002
 #define CPU_SOFT_RESET		ORION5X_BRIDGE_REG(0x10c)
 #define POWER_MNG_CTRL_REG	ORION5X_BRIDGE_REG(0x11C)
 #define BRIDGE_CAUSE		ORION5X_BRIDGE_REG(0x110)
+#define  WDT_INT_REQ		0x0008
 #define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
 #define  BRIDGE_INT_TIMER0	0x0002
 #define  BRIDGE_INT_TIMER1	0x0004
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
index e82e44d..4c69820 100644
--- a/arch/arm/mach-orion5x/include/mach/timex.h
+++ b/arch/arm/mach-orion5x/include/mach/timex.h
@@ -9,5 +9,3 @@
  */
 
 #define CLOCK_TICK_RATE		(100 * HZ)
-
-#define ORION5X_TCLK		166666667
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 2545ff9..632a36f 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -13,8 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <asm/gpio.h>
-#include <asm/io.h>
 #include <mach/orion5x.h>
 #include <plat/irq.h>
 #include "common.h"
@@ -162,7 +162,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 				polarity ^= 1 << pin;
 				writel(polarity, GPIO_IN_POL);
 			}
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 	}
 }
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index e321ec3..dfbb68d 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -161,7 +161,7 @@ subsys_initcall(kurobox_pro_pci_init);
  ****************************************************************************/
 
 static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
-	.phy_addr	= 8,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
 /*****************************************************************************
@@ -293,7 +293,7 @@ static void kurobox_pro_power_off(void)
 	const unsigned char shutdownwait[]	= {0x00, 0x0c};
 	const unsigned char poweroff[]		= {0x00, 0x06};
 	/* 38400 baud divisor */
-	const unsigned divisor = ((ORION5X_TCLK + (8 * 38400)) / (16 * 38400));
+	const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
 
 	pr_info("%s: triggering power-off...\n", __func__);
 
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
new file mode 100644
index 0000000..e0c43b8
--- /dev/null
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -0,0 +1,279 @@
+/*
+ * arch/arm/mach-orion5x/lsmini-setup.c
+ *
+ * Maintainer: Alexey Kopytko <alexey@kopytko.ru>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <linux/gpio.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+#include "include/mach/system.h"
+
+/*****************************************************************************
+ * Linkstation Mini Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LSMINI_NOR_BOOT_BASE	0xf4000000
+#define LSMINI_NOR_BOOT_SIZE	SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data lsmini_nor_flash_data = {
+	.width		= 1,
+};
+
+static struct resource lsmini_nor_flash_resource = {
+	.flags	= IORESOURCE_MEM,
+	.start	= LSMINI_NOR_BOOT_BASE,
+	.end	= LSMINI_NOR_BOOT_BASE + LSMINI_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device lsmini_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &lsmini_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &lsmini_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data lsmini_eth_data = {
+	.phy_addr	= 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata lsmini_i2c_rtc = {
+	I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LSMINI_GPIO_LED_ALARM	2
+#define LSMINI_GPIO_LED_INFO	3
+#define LSMINI_GPIO_LED_FUNC	9
+#define LSMINI_GPIO_LED_PWR	14
+
+static struct gpio_led lsmini_led_pins[] = {
+	{
+		.name	   = "alarm:red",
+		.gpio	   = LSMINI_GPIO_LED_ALARM,
+		.active_low     = 1,
+	}, {
+		.name	   = "info:amber",
+		.gpio	   = LSMINI_GPIO_LED_INFO,
+		.active_low     = 1,
+	}, {
+		.name	   = "func:blue:top",
+		.gpio	   = LSMINI_GPIO_LED_FUNC,
+		.active_low     = 1,
+	}, {
+		.name	   = "power:blue:bottom",
+		.gpio	   = LSMINI_GPIO_LED_PWR,
+	},
+};
+
+static struct gpio_led_platform_data lsmini_led_data = {
+	.leds	   = lsmini_led_pins,
+	.num_leds       = ARRAY_SIZE(lsmini_led_pins),
+};
+
+static struct platform_device lsmini_leds = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &lsmini_led_data,
+	},
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+
+#define LSMINI_GPIO_KEY_FUNC       15
+#define LSMINI_GPIO_KEY_POWER	   18
+#define LSMINI_GPIO_KEY_AUTOPOWER 17
+
+#define LSMINI_SW_POWER		0x00
+#define LSMINI_SW_AUTOPOWER	0x01
+
+static struct gpio_keys_button lsmini_buttons[] = {
+	{
+		.code	   = KEY_OPTION,
+		.gpio	   = LSMINI_GPIO_KEY_FUNC,
+		.desc	   = "Function Button",
+		.active_low     = 1,
+	}, {
+		.type		= EV_SW,
+		.code	   = LSMINI_SW_POWER,
+		.gpio	   = LSMINI_GPIO_KEY_POWER,
+		.desc	   = "Power-on Switch",
+		.active_low     = 1,
+	}, {
+		.type		= EV_SW,
+		.code	   = LSMINI_SW_AUTOPOWER,
+		.gpio	   = LSMINI_GPIO_KEY_AUTOPOWER,
+		.desc	   = "Power-auto Switch",
+		.active_low     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data lsmini_button_data = {
+	.buttons	= lsmini_buttons,
+	.nbuttons       = ARRAY_SIZE(lsmini_buttons),
+};
+
+static struct platform_device lsmini_button_device = {
+	.name	   = "gpio-keys",
+	.id	     = -1,
+	.num_resources  = 0,
+	.dev	    = {
+		.platform_data  = &lsmini_button_data,
+	},
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data lsmini_sata_data = {
+	.n_ports	= 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation Mini specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation Mini, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ */
+
+static void lsmini_power_off(void)
+{
+	arch_reset(0);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LSMINI_GPIO_USB_POWER	16
+#define LSMINI_GPIO_AUTO_POWER	17
+#define LSMINI_GPIO_POWER	18
+
+#define LSMINI_GPIO_HDD_POWER0	1
+#define LSMINI_GPIO_HDD_POWER1	19
+
+static struct orion5x_mpp_mode lsmini_mpp_modes[] __initdata = {
+	{  0, MPP_UNUSED }, /* LED_RESERVE1 (unused) */
+	{  1, MPP_GPIO }, /* HDD_PWR */
+	{  2, MPP_GPIO }, /* LED_ALARM */
+	{  3, MPP_GPIO }, /* LED_INFO */
+	{  4, MPP_UNUSED },
+	{  5, MPP_UNUSED },
+	{  6, MPP_UNUSED },
+	{  7, MPP_UNUSED },
+	{  8, MPP_UNUSED },
+	{  9, MPP_GPIO }, /* LED_FUNC */
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED }, /* LED_ETH (dummy) */
+	{ 12, MPP_UNUSED },
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_GPIO }, /* LED_PWR */
+	{ 15, MPP_GPIO }, /* FUNC */
+	{ 16, MPP_GPIO }, /* USB_PWR */
+	{ 17, MPP_GPIO }, /* AUTO_POWER */
+	{ 18, MPP_GPIO }, /* POWER */
+	{ 19, MPP_GPIO }, /* HDD_PWR1 */
+	{ -1 },
+};
+
+static void __init lsmini_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(lsmini_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&lsmini_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&lsmini_sata_data);
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	orion5x_setup_dev_boot_win(LSMINI_NOR_BOOT_BASE,
+				   LSMINI_NOR_BOOT_SIZE);
+	platform_device_register(&lsmini_nor_flash);
+
+	platform_device_register(&lsmini_button_device);
+
+	platform_device_register(&lsmini_leds);
+
+	i2c_register_board_info(0, &lsmini_i2c_rtc, 1);
+
+	/* enable USB power */
+	gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
+
+	/* register power-off method */
+	pm_power_off = lsmini_power_off;
+
+	pr_info("%s: finished\n", __func__);
+}
+
+#ifdef CONFIG_MACH_LINKSTATION_MINI
+MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
+	/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= lsmini_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index c04ab0e..640ea2a 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -11,8 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 53ff189..68acca9 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -109,7 +109,7 @@ subsys_initcall(mss2_pci_init);
  ****************************************************************************/
 
 static struct mv643xx_eth_platform_data mss2_eth_data = {
-	.phy_addr	= 8,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
 /*****************************************************************************
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 978d4d5..97c9ccb 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -39,7 +39,7 @@
  * Ethernet
  ****************************************************************************/
 static struct mv643xx_eth_platform_data mv2120_eth_data = {
-	.phy_addr	= 8,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
 static struct mv_sata_platform_data mv2120_sata_data = {
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index e72fe1e..15f5323 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -16,6 +16,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@@ -88,11 +89,20 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
 };
 
 static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
-	.phy_addr	= -1,
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
 	.speed		= SPEED_1000,
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan4",
+	.port_names[7]	= "lan3",
+};
+
 static void __init rd88f5181l_fxo_init(void)
 {
 	/*
@@ -107,6 +117,7 @@ static void __init rd88f5181l_fxo_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index a1fe325..8ad3934 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -17,6 +17,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@@ -89,11 +90,20 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
 };
 
 static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
-	.phy_addr	= -1,
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
 	.speed		= SPEED_1000,
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_platform_data rd88f5181l_ge_switch_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan4",
+	.port_names[7]	= "lan3",
+};
+
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
 	I2C_BOARD_INFO("ds1338", 0x68),
 };
@@ -112,6 +122,7 @@ static void __init rd88f5181l_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_ge_eth_data);
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_data, gpio_to_irq(8));
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 4c3bcd7..a04f9e4 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -221,7 +221,7 @@ subsys_initcall(rd88f5182_pci_init);
  ****************************************************************************/
 
 static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
-	.phy_addr	= 8,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
 /*****************************************************************************
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
new file mode 100644
index 0000000..262e25e
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
+ *
+ * Marvell Orion-1-90 AP GE Reference Design Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/ethtool.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
+	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
+static struct mtd_partition rd88f6183ap_ge_partitions[] = {
+	{
+		.name	= "kernel",
+		.offset	= 0x00000000,
+		.size	= 0x00200000,
+	}, {
+		.name	= "rootfs",
+		.offset	= 0x00200000,
+		.size	= 0x00500000,
+	}, {
+		.name	= "nvram",
+		.offset	= 0x00700000,
+		.size	= 0x00080000,
+	},
+};
+
+static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
+	.type		= "m25p64",
+	.nr_parts	= ARRAY_SIZE(rd88f6183ap_ge_partitions),
+	.parts		= rd88f6183ap_ge_partitions,
+};
+
+static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &rd88f6183ap_ge_spi_slave_data,
+		.irq		= NO_IRQ,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static void __init rd88f6183ap_ge_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_data, gpio_to_irq(3));
+	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
+				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
+	orion5x_spi_init();
+	orion5x_uart0_init();
+}
+
+static struct hw_pci rd88f6183ap_ge_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= orion5x_pci_map_irq,
+};
+
+static int __init rd88f6183ap_ge_pci_init(void)
+{
+	if (machine_is_rd88f6183ap_ge()) {
+		orion5x_pci_disable();
+		pci_common_init(&rd88f6183ap_ge_pci);
+	}
+
+	return 0;
+}
+subsys_initcall(rd88f6183ap_ge_pci_init);
+
+MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= rd88f6183ap_ge_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
new file mode 100644
index 0000000..0b101d7d
--- /dev/null
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -0,0 +1,369 @@
+/*
+ * Buffalo Terastation Pro II/Live Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Terastation Pro 2/Live Info
+ ****************************************************************************/
+
+/*
+ * Terastation Pro 2 hardware :
+ * - Marvell 88F5281-D0
+ * - Marvell 88SX6042 SATA controller (PCI)
+ * - Marvell 88E1118 Gigabit Ethernet PHY
+ * - 256KB NOR flash
+ * - 128MB of DDR RAM
+ * - PCIe port (not equipped)
+ */
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define TSP2_NOR_BOOT_BASE	0xf4000000
+#define TSP2_NOR_BOOT_SIZE	SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data tsp2_nor_flash_data = {
+	.width    = 1,
+};
+
+static struct resource tsp2_nor_flash_resource = {
+	.flags = IORESOURCE_MEM,
+	.start = TSP2_NOR_BOOT_BASE,
+	.end   = TSP2_NOR_BOOT_BASE + TSP2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device tsp2_nor_flash = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev           = {
+		.platform_data	= &tsp2_nor_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &tsp2_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+#define TSP2_PCI_SLOT0_OFFS		7
+#define TSP2_PCI_SLOT0_IRQ_PIN		11
+
+void __init tsp2_pci_preinit(void)
+{
+	int pin;
+
+	/*
+	 * Configure PCI GPIO IRQ pins
+	 */
+	pin = TSP2_PCI_SLOT0_IRQ_PIN;
+	if (gpio_request(pin, "PCI Int1") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "tsp2_pci_preinit failed "
+					"to set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "tsp2_pci_preinit failed to "
+				"gpio_request %d\n", pin);
+	}
+}
+
+static int __init tsp2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI IRQs are connected via GPIOs.
+	 */
+	if (slot == TSP2_PCI_SLOT0_OFFS)
+		return gpio_to_irq(TSP2_PCI_SLOT0_IRQ_PIN);
+
+	return -1;
+}
+
+static struct hw_pci tsp2_pci __initdata = {
+	.nr_controllers = 2,
+	.preinit        = tsp2_pci_preinit,
+	.swizzle        = pci_std_swizzle,
+	.setup          = orion5x_pci_sys_setup,
+	.scan           = orion5x_pci_sys_scan_bus,
+	.map_irq        = tsp2_pci_map_irq,
+};
+
+static int __init tsp2_pci_init(void)
+{
+	if (machine_is_terastation_pro2())
+		pci_common_init(&tsp2_pci);
+
+	return 0;
+}
+
+subsys_initcall(tsp2_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data tsp2_eth_data = {
+	.phy_addr	= 0,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+#define TSP2_RTC_GPIO	9
+
+static struct i2c_board_info __initdata tsp2_i2c_rtc = {
+	I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * Terastation Pro II specific power off method via UART1-attached
+ * microcontroller
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+static int tsp2_miconread(unsigned char *buf, int count)
+{
+	int i;
+	int timeout;
+
+	for (i = 0; i < count; i++) {
+		timeout = 10;
+
+		while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
+			if (--timeout == 0)
+				break;
+			udelay(1000);
+		}
+
+		if (timeout == 0)
+			break;
+		buf[i] = readl(UART1_REG(RX));
+	}
+
+	/* return read bytes */
+	return i;
+}
+
+static int tsp2_miconwrite(const unsigned char *buf, int count)
+{
+	int i = 0;
+
+	while (count--) {
+		while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
+			barrier();
+		writel(buf[i++], UART1_REG(TX));
+	}
+
+	return 0;
+}
+
+static int tsp2_miconsend(const unsigned char *data, int count)
+{
+	int i;
+	unsigned char checksum = 0;
+	unsigned char recv_buf[40];
+	unsigned char send_buf[40];
+	unsigned char correct_ack[3];
+	int retry = 2;
+
+	/* Generate checksum */
+	for (i = 0; i < count; i++)
+		checksum -=  data[i];
+
+	do {
+		/* Send data */
+		tsp2_miconwrite(data, count);
+
+		/* send checksum */
+		tsp2_miconwrite(&checksum, 1);
+
+		if (tsp2_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
+			printk(KERN_ERR ">%s: receive failed.\n", __func__);
+
+			/* send preamble to clear the receive buffer */
+			memset(&send_buf, 0xff, sizeof(send_buf));
+			tsp2_miconwrite(send_buf, sizeof(send_buf));
+
+			/* make dummy reads */
+			mdelay(100);
+			tsp2_miconread(recv_buf, sizeof(recv_buf));
+		} else {
+			/* Generate expected ack */
+			correct_ack[0] = 0x01;
+			correct_ack[1] = data[1];
+			correct_ack[2] = 0x00;
+
+			/* checksum Check */
+			if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
+			     recv_buf[3]) & 0xFF) {
+				printk(KERN_ERR ">%s: Checksum Error : "
+					"Received data[%02x, %02x, %02x, %02x]"
+					"\n", __func__, recv_buf[0],
+					recv_buf[1], recv_buf[2], recv_buf[3]);
+			} else {
+				/* Check Received Data */
+				if (correct_ack[0] == recv_buf[0] &&
+				    correct_ack[1] == recv_buf[1] &&
+				    correct_ack[2] == recv_buf[2]) {
+					/* Interval for next command */
+					mdelay(10);
+
+					/* Receive ACK */
+					return 0;
+				}
+			}
+			/* Received NAK or illegal Data */
+			printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
+					"Received\n", __func__);
+		}
+	} while (retry--);
+
+	/* Interval for next command */
+	mdelay(10);
+
+	return -1;
+}
+
+static void tsp2_power_off(void)
+{
+	const unsigned char watchdogkill[]	= {0x01, 0x35, 0x00};
+	const unsigned char shutdownwait[]	= {0x00, 0x0c};
+	const unsigned char poweroff[]		= {0x00, 0x06};
+	/* 38400 baud divisor */
+	const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack uart1 and reset into sane state (38400,8n1,even parity) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x1b, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x07, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* Send the commands to shutdown the Terastation Pro II */
+	tsp2_miconsend(watchdogkill, sizeof(watchdogkill)) ;
+	tsp2_miconsend(shutdownwait, sizeof(shutdownwait)) ;
+	tsp2_miconsend(poweroff, sizeof(poweroff));
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode tsp2_mpp_modes[] __initdata = {
+	{  0, MPP_PCIE_RST_OUTn },
+	{  1, MPP_UNUSED },
+	{  2, MPP_UNUSED },
+	{  3, MPP_UNUSED },
+	{  4, MPP_NAND },		/* BOOT NAND Flash REn */
+	{  5, MPP_NAND },		/* BOOT NAND Flash WEn */
+	{  6, MPP_NAND },		/* BOOT NAND Flash HREn[0] */
+	{  7, MPP_NAND },		/* BOOT NAND Flash WEn[0] */
+	{  8, MPP_GPIO },		/* MICON int */
+	{  9, MPP_GPIO },		/* RTC int */
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_GPIO },		/* PCI Int A */
+	{ 12, MPP_UNUSED },
+	{ 13, MPP_GPIO },		/* UPS on UART0 enable */
+	{ 14, MPP_GPIO },		/* UPS low battery detection */
+	{ 15, MPP_UNUSED },
+	{ 16, MPP_UART },		/* UART1 RXD */
+	{ 17, MPP_UART },		/* UART1 TXD */
+	{ 18, MPP_UART },		/* UART1 CTSn */
+	{ 19, MPP_UART },		/* UART1 RTSn */
+	{ -1 },
+};
+
+static void __init tsp2_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(tsp2_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_setup_dev_boot_win(TSP2_NOR_BOOT_BASE,
+				   TSP2_NOR_BOOT_SIZE);
+	platform_device_register(&tsp2_nor_flash);
+
+	orion5x_ehci0_init();
+	orion5x_eth_init(&tsp2_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+	orion5x_uart1_init();
+
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(TSP2_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(TSP2_RTC_GPIO) == 0)
+			tsp2_i2c_rtc.irq = gpio_to_irq(TSP2_RTC_GPIO);
+		else
+			gpio_free(TSP2_RTC_GPIO);
+	}
+	if (tsp2_i2c_rtc.irq == 0)
+		pr_warning("tsp2_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
+
+	/* register Terastation Pro II specific power-off method */
+	pm_power_off = tsp2_power_off;
+}
+
+MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
+	/* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= tsp2_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index ae0a5dc..1368e9f 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -103,8 +103,7 @@ static struct platform_device ts78xx_nor_boot_flash = {
  * Ethernet
  ****************************************************************************/
 static struct mv643xx_eth_platform_data ts78xx_eth_data = {
-	.phy_addr	= 0,
-	.force_phy_addr = 1,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
 /*****************************************************************************
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
index 83feac3..c9abb8f 100644
--- a/arch/arm/mach-orion5x/tsx09-common.c
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -16,6 +16,7 @@
 #include <linux/timex.h>
 #include <linux/serial_reg.h>
 #include "tsx09-common.h"
+#include "common.h"
 
 /*****************************************************************************
  * QNAP TS-x09 specific power off method via UART1-attached PIC
@@ -26,7 +27,7 @@
 void qnap_tsx09_power_off(void)
 {
 	/* 19200 baud divisor */
-	const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
+	const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200));
 
 	pr_info("%s: triggering power-off...\n", __func__);
 
@@ -48,7 +49,7 @@ void qnap_tsx09_power_off(void)
  ****************************************************************************/
 
 struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
-	.phy_addr	= 8,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
 static int __init qnap_tsx09_parse_hex_nibble(char n)
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index b6bc43e..7ddc22c 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -92,7 +92,7 @@ static struct platform_device wnr854t_nor_flash = {
 };
 
 static struct mv643xx_eth_platform_data wnr854t_eth_data = {
-	.phy_addr	= -1,
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
 	.speed		= SPEED_1000,
 	.duplex		= DUPLEX_FULL,
 };
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index b10da17..cc8f892 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -15,6 +15,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -100,11 +101,20 @@ static struct platform_device wrt350n_v2_nor_flash = {
 };
 
 static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
-	.phy_addr	= -1,
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
 	.speed		= SPEED_1000,
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_platform_data wrt350n_v2_switch_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan3",
+	.port_names[7]	= "lan4",
+};
+
 static void __init wrt350n_v2_init(void)
 {
 	/*
@@ -119,6 +129,7 @@ static void __init wrt350n_v2_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&wrt350n_v2_eth_data);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index 24d036a..898c0e8 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -20,9 +20,9 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 #include <mach/clock.h>
 #include "clock.h"
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 3ba46ed..45734bb 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -25,9 +25,9 @@
 #include <linux/serial_8250.h>
 #include <linux/device.h>
 #include <linux/spi/spi.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index 833c56be..ac2f70e 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -21,12 +21,12 @@
 #include <linux/err.h>
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/dma.h>
 #include <asm/dma-mapping.h>
-#include <asm/io.h>
 #include <asm/mach/dma.h>
 #include <mach/clock.h>
 
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index fb51f72..015cc21 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/platform.h>
 #include <mach/gpio.h>
 
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
index 8985a4622..e12e7ab 100644
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -21,8 +21,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <mach/platform.h>
 
 static void arch_idle(void)
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
index 956fbd8e..5ff0196 100644
--- a/arch/arm/mach-pnx4008/include/mach/timex.h
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -14,8 +14,8 @@
 #ifndef __PNX4008_TIMEX_H
 #define __PNX4008_TIMEX_H
 
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 #define CLOCK_TICK_RATE		1000000
 
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 5c4f55a..a9ce02b 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -23,8 +23,8 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index f970906d..b3d8d53 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -18,8 +18,8 @@
 #include <linux/suspend.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/cacheflush.h>
 #include <mach/pm.h>
 #include <mach/clock.h>
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index 9be84bb..f40961e 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -12,8 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <mach/platform.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 1809752..fc0ba18 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -22,10 +22,10 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
 #include <asm/errno.h>
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index e8ee7ec..a062235 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -38,16 +38,23 @@ config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
 	select SA1111
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
 	select PXA27x
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform"
 	select PXA27x
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_MP900C
+	bool "Nec Mobilepro 900/c"
+	select PXA25x
 
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
@@ -64,6 +71,14 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config CORGI_SSP_DEPRECATED
+	bool
+	select PXA_SSP
+	help
+	  This option will include corgi_ssp.c and corgi_lcd.c
+	  that corgi_ts.c and other legacy drivers (corgi_bl.c
+	  and sharpsl_pm.c) may depend on.
+
 config MACH_POODLE
 	bool "Enable Sharp SL-5600 (Poodle) Support"
 	depends on PXA_SHARPSL
@@ -114,10 +129,21 @@ config MACH_TOSA
 	bool "Enable Sharp SL-6000x (Tosa) Support"
 	depends on PXA_SHARPSL
 	select PXA25x
+	select PXA_HAVE_BOARD_IRQS
+
+config ARCH_VIPER
+	bool "Arcom/Eurotech VIPER SBC"
+	select PXA25x
+	select ISA
+	select I2C_GPIO
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+	select PXA_HAVE_ISA_IRQS
 
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_E330
 	bool "Toshiba e330"
@@ -170,13 +196,41 @@ config MACH_E800
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
 
+config TRIZEPS_PXA
+	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
+	depends on TRIZEPS_PXA
+	select TRIZEPS_PCMCIA
 	select PXA27x
 
-config MACH_TRIZEPS4_CONXS
+config MACH_TRIZEPS4WL
+	bool "Keith und Koep Trizeps4-WL DIMM-Module"
+	depends on TRIZEPS_PXA
+	select TRIZEPS_PCMCIA
+	select PXA27x
+	select PXA_SSP
+
+choice
+	prompt "Select base board for Trizeps module"
+	depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
 	bool "ConXS Eval Board"
-	depends on MACH_TRIZEPS4
+
+config MACH_TRIZEPS_UCONXS
+	bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+	bool "another Board"
+
+endchoice
+
+config TRIZEPS_PCMCIA
+	bool
+	help
+	  Enable PCMCIA support for Trizeps modules
 
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
@@ -189,6 +243,7 @@ config MACH_COLIBRI
 config MACH_ZYLONITE
 	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
+	select PXA_SSP
 	select HAVE_PWM
 
 config MACH_LITTLETON
@@ -207,20 +262,41 @@ config MACH_SAAR
 	select PXA930
 
 config MACH_ARMCORE
-	bool "CompuLab CM-X270 modules"
+	bool "CompuLab CM-X255/CM-X270 modules"
 	select PXA27x
 	select IWMMXT
+	select PXA25x
+	select PXA_SSP
+
+config MACH_CM_X300
+	bool "CompuLab CM-X300 modules"
+	select PXA3xx
+	select CPU_PXA300
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
 	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_MIOA701
+	bool "Mitac Mio A701 Support"
+	select PXA27x
+	select IWMMXT
+	select LEDS_GPIO
+	select HAVE_PWM
+	select GPIO_SYSFS
+	help
+	  Say Y here if you intend to run this kernel on a
+	  MIO A701. Currently there is only basic support
+	  for this PDA.
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
 	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
 
 config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
@@ -236,6 +312,16 @@ config MACH_PALMTX
 	  Say Y here if you intend to run this kernel on a Palm T|X
 	  handheld computer.
 
+config MACH_PALMZ72
+	bool "Palm Zire 72"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on Palm Zire 72
+	  handheld computer.
+
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	select HAVE_PWM
@@ -256,6 +342,9 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
+config MACH_AM200EPD
+	depends on MACH_GUMSTIX_F
+	bool "Enable AM200EPD board support"
 
 config PXA_EZX
 	bool "Motorola EZX Platform"
@@ -343,4 +432,10 @@ config TOSA_BT
 	  This is a simple driver that is able to control
 	  the state of built in bluetooth chip on tosa.
 
+config PXA_HAVE_BOARD_IRQS
+	bool
+
+config PXA_HAVE_ISA_IRQS
+	bool
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 99ecbe7..d64c68b 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -6,7 +6,12 @@
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
 				   time.o gpio.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
-obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
+
+ifeq ($(CONFIG_CPU_FREQ),y)
+obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
+obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
+obj-$(CONFIG_PXA3xx)		+= cpufreq-pxa3xx.o
+endif
 
 # Generic drivers that other drivers may depend upon
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
@@ -22,27 +27,34 @@ obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
+obj-$(CONFIG_MACH_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
-obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
-obj-$(CONFIG_MACH_POODLE)	+= poodle.o corgi_ssp.o
+obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
+obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
+obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
+obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o eseries_udc.o
-obj-$(CONFIG_MACH_E740)		+= e740_lcd.o
-obj-$(CONFIG_MACH_E750)		+= e750_lcd.o
-obj-$(CONFIG_MACH_E400)		+= e400_lcd.o
-obj-$(CONFIG_MACH_E800)		+= e800_lcd.o
+obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
+obj-$(CONFIG_MACH_E330)		+= e330.o
+obj-$(CONFIG_MACH_E350)		+= e350.o
+obj-$(CONFIG_MACH_E740)		+= e740.o
+obj-$(CONFIG_MACH_E750)		+= e750.o
+obj-$(CONFIG_MACH_E400)		+= e400.o
+obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
+obj-$(CONFIG_ARCH_VIPER)	+= viper.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
@@ -53,7 +65,8 @@ obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
-obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
+obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
@@ -61,12 +74,11 @@ led-y := leds.o
 led-$(CONFIG_ARCH_LUBBOCK)	+= leds-lubbock.o
 led-$(CONFIG_MACH_MAINSTONE)	+= leds-mainstone.o
 led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
-led-$(CONFIG_MACH_TRIZEPS4)	+= leds-trizeps4.o
 
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
 ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
 endif
 
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
deleted file mode 100644
index 5c67b18..0000000
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita)
- * (uses a Maxim MAX7310 8 Port IO Expander)
- *
- * Copyright 2005 Openedhand Ltd.
- *
- * Author: Richard Purdie <richard@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <mach/akita.h>
-
-/* MAX7310 Regiser Map */
-#define MAX7310_INPUT    0x00
-#define MAX7310_OUTPUT   0x01
-#define MAX7310_POLINV   0x02
-#define MAX7310_IODIR    0x03 /* 1 = Input, 0 = Output */
-#define MAX7310_TIMEOUT  0x04
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END };
-
-/* I2C Magic */
-I2C_CLIENT_INSMOD;
-
-static int max7310_write(struct i2c_client *client, int address, int data);
-static struct i2c_client max7310_template;
-static void akita_ioexp_work(struct work_struct *private_);
-
-static struct device *akita_ioexp_device;
-static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT;
-DECLARE_WORK(akita_ioexp, akita_ioexp_work);
-
-
-/*
- * MAX7310 Access
- */
-static int max7310_config(struct device *dev, int iomode, int polarity)
-{
-	int ret;
-	struct i2c_client *client = to_i2c_client(dev);
-
-	ret = max7310_write(client, MAX7310_POLINV, polarity);
-	if (ret < 0)
-		return ret;
-	ret = max7310_write(client, MAX7310_IODIR, iomode);
-	return ret;
-}
-
-static int max7310_set_ouputs(struct device *dev, int outputs)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-
-	return max7310_write(client, MAX7310_OUTPUT, outputs);
-}
-
-/*
- * I2C Functions
- */
-static int max7310_write(struct i2c_client *client, int address, int value)
-{
-	u8 data[2];
-
-	data[0] = address & 0xff;
-	data[1] = value & 0xff;
-
-	if (i2c_master_send(client, data, 2) == 2)
-		return 0;
-	return -1;
-}
-
-static int max7310_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *new_client;
-	int err;
-
-	if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))
-		return -ENOMEM;
-
-	max7310_template.adapter = adapter;
-	max7310_template.addr = address;
-
-	memcpy(new_client, &max7310_template, sizeof(struct i2c_client));
-
-	if ((err = i2c_attach_client(new_client))) {
-		kfree(new_client);
-		return err;
-	}
-
-	max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0);
-	akita_ioexp_device = &new_client->dev;
-	schedule_work(&akita_ioexp);
-
-	return 0;
-}
-
-static int max7310_attach_adapter(struct i2c_adapter *adapter)
-{
-	return i2c_probe(adapter, &addr_data, max7310_detect);
-}
-
-static int max7310_detach_client(struct i2c_client *client)
-{
-	int err;
-
-	akita_ioexp_device = NULL;
-
-	if ((err = i2c_detach_client(client)))
-		return err;
-
-	kfree(client);
-	return 0;
-}
-
-static struct i2c_driver max7310_i2c_driver = {
-	.driver = {
-		.name	= "akita-max7310",
-	},
-	.id		= I2C_DRIVERID_AKITAIOEXP,
-	.attach_adapter	= max7310_attach_adapter,
-	.detach_client	= max7310_detach_client,
-};
-
-static struct i2c_client max7310_template = {
-	name:   "akita-max7310",
-	driver: &max7310_i2c_driver,
-};
-
-void akita_set_ioexp(struct device *dev, unsigned char bit)
-{
-	ioexp_output_value |= bit;
-
-	if (akita_ioexp_device)
-		schedule_work(&akita_ioexp);
-	return;
-}
-
-void akita_reset_ioexp(struct device *dev, unsigned char bit)
-{
-	ioexp_output_value &= ~bit;
-
-	if (akita_ioexp_device)
-		schedule_work(&akita_ioexp);
-	return;
-}
-
-EXPORT_SYMBOL(akita_set_ioexp);
-EXPORT_SYMBOL(akita_reset_ioexp);
-
-static void akita_ioexp_work(struct work_struct *private_)
-{
-	if (akita_ioexp_device)
-		max7310_set_ouputs(akita_ioexp_device, ioexp_output_value);
-}
-
-
-#ifdef CONFIG_PM
-static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	flush_scheduled_work();
-	return 0;
-}
-
-static int akita_ioexp_resume(struct platform_device *pdev)
-{
-	schedule_work(&akita_ioexp);
-	return 0;
-}
-#else
-#define akita_ioexp_suspend NULL
-#define akita_ioexp_resume NULL
-#endif
-
-static int __init akita_ioexp_probe(struct platform_device *pdev)
-{
-	return i2c_add_driver(&max7310_i2c_driver);
-}
-
-static int akita_ioexp_remove(struct platform_device *pdev)
-{
-	i2c_del_driver(&max7310_i2c_driver);
-	return 0;
-}
-
-static struct platform_driver akita_ioexp_driver = {
-	.probe		= akita_ioexp_probe,
-	.remove		= akita_ioexp_remove,
-	.suspend	= akita_ioexp_suspend,
-	.resume		= akita_ioexp_resume,
-	.driver		= {
-		.name	= "akita-ioexp",
-	},
-};
-
-static int __init akita_ioexp_init(void)
-{
-	return platform_driver_register(&akita_ioexp_driver);
-}
-
-static void __exit akita_ioexp_exit(void)
-{
-	platform_driver_unregister(&akita_ioexp_driver);
-}
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("Akita IO-Expander driver");
-MODULE_LICENSE("GPL");
-
-fs_initcall(akita_ioexp_init);
-module_exit(akita_ioexp_exit);
-
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
new file mode 100644
index 0000000..b965085
--- /dev/null
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -0,0 +1,374 @@
+/*
+ * am200epd.c -- Platform device for AM200 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Lyre interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/pxafb.h>
+
+#include <video/metronomefb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am200_device;
+static struct metronome_board am200_board;
+
+static struct pxafb_mode_info am200_fb_mode_9inch7 = {
+	.pixclock	= 40000,
+	.xres		= 1200,
+	.yres		= 842,
+	.bpp		= 16,
+	.hsync_len	= 2,
+	.left_margin	= 2,
+	.right_margin	= 2,
+	.vsync_len	= 1,
+	.upper_margin	= 2,
+	.lower_margin	= 25,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_8inch = {
+	.pixclock	= 40000,
+	.xres		= 1088,
+	.yres		= 791,
+	.bpp		= 16,
+	.hsync_len	= 28,
+	.left_margin	= 8,
+	.right_margin	= 30,
+	.vsync_len	= 8,
+	.upper_margin	= 10,
+	.lower_margin	= 8,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_6inch = {
+	.pixclock	= 40189,
+	.xres		= 832,
+	.yres		= 622,
+	.bpp		= 16,
+	.hsync_len	= 28,
+	.left_margin	= 34,
+	.right_margin	= 34,
+	.vsync_len	= 25,
+	.upper_margin	= 0,
+	.lower_margin	= 2,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info am200_fb_info = {
+	.modes		= &am200_fb_mode_6inch,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_TYPE_COLOR_TFT | LCD_PCLK_EDGE_FALL |
+			  LCD_AC_BIAS_FREQ(24),
+};
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+static int gpios[] = { LED_GPIO_PIN , STDBY_GPIO_PIN , RST_GPIO_PIN,
+			RDY_GPIO_PIN, ERR_GPIO_PIN, PCBPWR_GPIO_PIN };
+static char *gpio_names[] = { "LED" , "STDBY" , "RST", "RDY", "ERR", "PCBPWR" };
+
+static int am200_init_gpio_regs(struct metronomefb_par *par)
+{
+	int i;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		err = gpio_request(gpios[i], gpio_names[i]);
+		if (err) {
+			dev_err(&am200_device->dev, "failed requesting "
+				"gpio %s, err=%d\n", gpio_names[i], err);
+			goto err_req_gpio;
+		}
+	}
+
+	gpio_direction_output(LED_GPIO_PIN, 0);
+	gpio_direction_output(STDBY_GPIO_PIN, 0);
+	gpio_direction_output(RST_GPIO_PIN, 0);
+
+	gpio_direction_input(RDY_GPIO_PIN);
+	gpio_direction_input(ERR_GPIO_PIN);
+
+	gpio_direction_output(PCBPWR_GPIO_PIN, 0);
+
+	return 0;
+
+err_req_gpio:
+	while (i > 0)
+		gpio_free(gpios[i--]);
+
+	return err;
+}
+
+static void am200_cleanup(struct metronomefb_par *par)
+{
+	int i;
+
+	free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++)
+		gpio_free(gpios[i]);
+}
+
+static int am200_share_video_mem(struct fb_info *info)
+{
+	/* rough check if this is our desired fb and not something else */
+	if ((info->var.xres != am200_fb_info.modes->xres)
+		|| (info->var.yres != am200_fb_info.modes->yres))
+		return 0;
+
+	/* we've now been notified that we have our new fb */
+	am200_board.metromem = info->screen_base;
+	am200_board.host_fbinfo = info;
+
+	/* try to refcount host drv since we are the consumer after this */
+	if (!try_module_get(info->fbops->owner))
+		return -ENODEV;
+
+	return 0;
+}
+
+static int am200_unshare_video_mem(struct fb_info *info)
+{
+	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+	if (info != am200_board.host_fbinfo)
+		return 0;
+
+	module_put(am200_board.host_fbinfo->fbops->owner);
+	return 0;
+}
+
+static int am200_fb_notifier_callback(struct notifier_block *self,
+				 unsigned long event, void *data)
+{
+	struct fb_event *evdata = data;
+	struct fb_info *info = evdata->info;
+
+	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+	if (event == FB_EVENT_FB_REGISTERED)
+		return am200_share_video_mem(info);
+	else if (event == FB_EVENT_FB_UNREGISTERED)
+		return am200_unshare_video_mem(info);
+
+	return 0;
+}
+
+static struct notifier_block am200_fb_notif = {
+	.notifier_call = am200_fb_notifier_callback,
+};
+
+/* this gets called as part of our init. these steps must be done now so
+ * that we can use set_pxa_fb_info */
+static void __init am200_presetup_fb(void)
+{
+	int fw;
+	int fh;
+	int padding_size;
+	int totalsize;
+
+	switch (panel_type) {
+	case 6:
+		am200_fb_info.modes = &am200_fb_mode_6inch;
+		break;
+	case 8:
+		am200_fb_info.modes = &am200_fb_mode_8inch;
+		break;
+	case 97:
+		am200_fb_info.modes = &am200_fb_mode_9inch7;
+		break;
+	default:
+		dev_err(&am200_device->dev, "invalid panel_type selection,"
+						" setting to 6\n");
+		am200_fb_info.modes = &am200_fb_mode_6inch;
+		break;
+	}
+
+	/* the frame buffer is divided as follows:
+	command | CRC | padding
+	16kb waveform data | CRC | padding
+	image data | CRC
+	*/
+
+	fw = am200_fb_info.modes->xres;
+	fh = am200_fb_info.modes->yres;
+
+	/* waveform must be 16k + 2 for checksum */
+	am200_board.wfm_size = roundup(16*1024 + 2, fw);
+
+	padding_size = PAGE_SIZE + (4 * fw);
+
+	/* total is 1 cmd , 1 wfm, padding and image */
+	totalsize = fw + am200_board.wfm_size + padding_size + (fw*fh);
+
+	/* save this off because we're manipulating fw after this and
+	 * we'll need it when we're ready to setup the framebuffer */
+	am200_board.fw = fw;
+	am200_board.fh = fh;
+
+	/* the reason we do this adjustment is because we want to acquire
+	 * more framebuffer memory without imposing custom awareness on the
+	 * underlying pxafb driver */
+	am200_fb_info.modes->yres = DIV_ROUND_UP(totalsize, fw);
+
+	/* we divide since we told the LCD controller we're 16bpp */
+	am200_fb_info.modes->xres /= 2;
+
+	set_pxa_fb_info(&am200_fb_info);
+
+}
+
+/* this gets called by metronomefb as part of its init, in our case, we
+ * have already completed initial framebuffer init in presetup_fb so we
+ * can just setup the fb access pointers */
+static int am200_setup_fb(struct metronomefb_par *par)
+{
+	int fw;
+	int fh;
+
+	fw = am200_board.fw;
+	fh = am200_board.fh;
+
+	/* metromem was set up by the notifier in share_video_mem so now
+	 * we can use its value to calculate the other entries */
+	par->metromem_cmd = (struct metromem_cmd *) am200_board.metromem;
+	par->metromem_wfm = am200_board.metromem + fw;
+	par->metromem_img = par->metromem_wfm + am200_board.wfm_size;
+	par->metromem_img_csum = (u16 *) (par->metromem_img + (fw * fh));
+	par->metromem_dma = am200_board.host_fbinfo->fix.smem_start;
+
+	return 0;
+}
+
+static int am200_get_panel_type(void)
+{
+	return panel_type;
+}
+
+static irqreturn_t am200_handle_irq(int irq, void *dev_id)
+{
+	struct metronomefb_par *par = dev_id;
+
+	wake_up_interruptible(&par->waitq);
+	return IRQ_HANDLED;
+}
+
+static int am200_setup_irq(struct fb_info *info)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+				IRQF_DISABLED|IRQF_TRIGGER_FALLING,
+				"AM200", info->par);
+	if (ret)
+		dev_err(&am200_device->dev, "request_irq failed: %d\n", ret);
+
+	return ret;
+}
+
+static void am200_set_rst(struct metronomefb_par *par, int state)
+{
+	gpio_set_value(RST_GPIO_PIN, state);
+}
+
+static void am200_set_stdby(struct metronomefb_par *par, int state)
+{
+	gpio_set_value(STDBY_GPIO_PIN, state);
+}
+
+static int am200_wait_event(struct metronomefb_par *par)
+{
+	return wait_event_timeout(par->waitq, gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static int am200_wait_event_intr(struct metronomefb_par *par)
+{
+	return wait_event_interruptible_timeout(par->waitq,
+					gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static struct metronome_board am200_board = {
+	.owner			= THIS_MODULE,
+	.setup_irq		= am200_setup_irq,
+	.setup_io		= am200_init_gpio_regs,
+	.setup_fb		= am200_setup_fb,
+	.set_rst		= am200_set_rst,
+	.set_stdby		= am200_set_stdby,
+	.met_wait_event		= am200_wait_event,
+	.met_wait_event_intr	= am200_wait_event_intr,
+	.get_panel_type		= am200_get_panel_type,
+	.cleanup		= am200_cleanup,
+};
+
+static int __init am200_init(void)
+{
+	int ret;
+
+	/* before anything else, we request notification for any fb
+	 * creation events */
+	fb_register_client(&am200_fb_notif);
+
+	/* request our platform independent driver */
+	request_module("metronomefb");
+
+	am200_device = platform_device_alloc("metronomefb", -1);
+	if (!am200_device)
+		return -ENOMEM;
+
+	/* the am200_board that will be seen by metronomefb is a copy */
+	platform_device_add_data(am200_device, &am200_board,
+					sizeof(am200_board));
+
+	/* this _add binds metronomefb to am200. metronomefb refcounts am200 */
+	ret = platform_device_add(am200_device);
+
+	if (ret) {
+		platform_device_put(am200_device);
+		fb_unregister_client(&am200_fb_notif);
+		return ret;
+	}
+
+	am200_presetup_fb();
+
+	return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+module_init(am200_init);
+
+MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
new file mode 100644
index 0000000..83a4cdf
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -0,0 +1,258 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x255.c
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand-gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/bitfield.h>
+
+#include "generic.h"
+
+#define GPIO_NAND_CS	(5)
+#define GPIO_NAND_ALE	(4)
+#define GPIO_NAND_CLE	(3)
+#define GPIO_NAND_RB	(10)
+
+static unsigned long cmx255_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO81_SSP2_CLK_OUT,
+	GPIO82_SSP2_FRM_OUT,
+	GPIO83_SSP2_TXD,
+	GPIO84_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO9_GPIO,				/* PC card reset */
+
+	/* NAND controls */
+	GPIO5_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO4_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND ALE */
+	GPIO3_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND CLE */
+	GPIO10_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO22_GPIO,	/* DM9000 interrupt */
+};
+
+#if defined(CONFIG_SPI_PXA2XX)
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "rtc-max6902",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+	},
+};
+
+static void __init cmx255_init_rtc(void)
+{
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
+}
+#else
+static inline void cmx255_init_rtc(void) {}
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition cmx255_nor_partitions[] = {
+	{
+		.name		= "ARMmon",
+		.size		= 0x00030000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	} , {
+		.name		= "ARMmon setup block",
+		.size		= 0x00010000,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	} , {
+		.name		= "kernel",
+		.size		= 0x00160000,
+		.offset		= MTDPART_OFS_APPEND,
+	} , {
+		.name		= "ramdisk",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND
+	}
+};
+
+static struct physmap_flash_data cmx255_nor_flash_data[] = {
+	{
+		.width		= 2,	/* bankwidth in bytes */
+		.parts		= cmx255_nor_partitions,
+		.nr_parts	= ARRAY_SIZE(cmx255_nor_partitions)
+	}
+};
+
+static struct resource cmx255_nor_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device cmx255_nor = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.dev	= {
+		.platform_data = cmx255_nor_flash_data,
+	},
+	.resource = &cmx255_nor_resource,
+	.num_resources = 1,
+};
+
+static void __init cmx255_init_nor(void)
+{
+	platform_device_register(&cmx255_nor);
+}
+#else
+static inline void cmx255_init_nor(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+static struct resource cmx255_nand_resource[] = {
+	[0] = {
+		.start = PXA_CS1_PHYS,
+		.end   = PXA_CS1_PHYS + 11,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = PXA_CS5_PHYS,
+		.end   = PXA_CS5_PHYS + 3,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition cmx255_nand_parts[] = {
+	[0] = {
+		.name	= "cmx255-nand",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= 0,
+	},
+};
+
+static struct gpio_nand_platdata cmx255_nand_platdata = {
+	.gpio_nce = GPIO_NAND_CS,
+	.gpio_cle = GPIO_NAND_CLE,
+	.gpio_ale = GPIO_NAND_ALE,
+	.gpio_rdy = GPIO_NAND_RB,
+	.gpio_nwp = -1,
+	.parts = cmx255_nand_parts,
+	.num_parts = ARRAY_SIZE(cmx255_nand_parts),
+	.chip_delay = 25,
+};
+
+static struct platform_device cmx255_nand = {
+	.name		= "gpio-nand",
+	.num_resources	= ARRAY_SIZE(cmx255_nand_resource),
+	.resource	= cmx255_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx255_nand_platdata,
+	}
+};
+
+static void __init cmx255_init_nand(void)
+{
+	platform_device_register(&cmx255_nand);
+}
+#else
+static inline void cmx255_init_nand(void) {}
+#endif
+
+void __init cmx255_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
+
+	cmx255_init_rtc();
+	cmx255_init_nor();
+	cmx255_init_nand();
+}
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
deleted file mode 100644
index 2d5bcea..0000000
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x270-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- *
- * Copyright (C) 2007, 2008 Compulab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/pci.h>
-#include <mach/pxa-regs.h>
-#include <asm/mach-types.h>
-
-#include <asm/hardware/it8152.h>
-
-unsigned long it8152_base_address;
-static int cmx270_it8152_irq_gpio;
-
-/*
- * Only first 64MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
- * This is really ugly and we need a better way of specifying
- * DMA-capable regions of memory.
- */
-void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
-	unsigned long *zhole_size)
-{
-	unsigned int sz = SZ_64M >> PAGE_SHIFT;
-
-	if (machine_is_armcore()) {
-		pr_info("Adjusting zones for CM-X270\n");
-
-		/*
-		 * Only adjust if > 64M on current system
-		 */
-		if (node || (zone_size[0] <= sz))
-			return;
-
-		zone_size[1] = zone_size[0] - sz;
-		zone_size[0] = sz;
-		zhole_size[1] = zhole_size[0];
-		zhole_size[0] = 0;
-	}
-}
-
-static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	/* clear our parent irq */
-	GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
-
-	it8152_irq_demux(irq, desc);
-}
-
-void __cmx270_pci_init_irq(int irq_gpio)
-{
-	it8152_init_irq();
-
-	cmx270_it8152_irq_gpio = irq_gpio;
-
-	set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
-
-	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
-}
-
-#ifdef CONFIG_PM
-static unsigned long sleep_save_ite[10];
-
-void __cmx270_pci_suspend(void)
-{
-	/* save ITE state */
-	sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
-	sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
-	sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
-
-	/* Clear ITE IRQ's */
-	__raw_writel((0), IT8152_INTC_PDCNIRR);
-	__raw_writel((0), IT8152_INTC_LPCNIRR);
-}
-
-void __cmx270_pci_resume(void)
-{
-	/* restore IT8152 state */
-	__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
-	__raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
-	__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
-}
-#else
-void cmx270_pci_suspend(void) {}
-void cmx270_pci_resume(void) {}
-#endif
-
-/* PCI IRQ mapping*/
-static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
-
-	irq = it8152_pci_map_irq(dev, slot, pin);
-	if (irq)
-		return irq;
-
-	/*
-	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-X270 is
-	  unrealistic. Here we keep mapping for ATXBase and SB-X270.
-	*/
-	/* ATXBASE PCI slot */
-	if (slot == 7)
-		return IT8152_PCI_INTA;
-
-	/* ATXBase/SB-x270 CardBus */
-	if (slot == 8 || slot == 0)
-		return IT8152_PCI_INTB;
-
-	/* ATXBase Ethernet */
-	if (slot == 9)
-		return IT8152_PCI_INTA;
-
-	/* SB-x270 Ethernet */
-	if (slot == 16)
-		return IT8152_PCI_INTA;
-
-	/* PC104+ interrupt routing */
-	if ((slot == 17) || (slot == 19))
-		return IT8152_PCI_INTA;
-	if ((slot == 18) || (slot == 20))
-		return IT8152_PCI_INTB;
-
-	return(0);
-}
-
-static void cmx270_pci_preinit(void)
-{
-	pr_info("Initializing CM-X270 PCI subsystem\n");
-
-	__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
-	if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
-		pr_info("PCI Bridge found.\n");
-
-		/* set PCI I/O base at 0 */
-		writel(0x848, IT8152_PCI_CFG_ADDR);
-		writel(0, IT8152_PCI_CFG_DATA);
-
-		/* set PCI memory base at 0 */
-		writel(0x840, IT8152_PCI_CFG_ADDR);
-		writel(0, IT8152_PCI_CFG_DATA);
-
-		writel(0x20, IT8152_GPIO_GPDR);
-
-		/* CardBus Controller on ATXbase baseboard */
-		writel(0x4000, IT8152_PCI_CFG_ADDR);
-		if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
-			pr_info("CardBus Bridge found.\n");
-
-			/* Configure socket 0 */
-			writel(0x408C, IT8152_PCI_CFG_ADDR);
-			writel(0x1022, IT8152_PCI_CFG_DATA);
-
-			writel(0x4080, IT8152_PCI_CFG_ADDR);
-			writel(0x3844d060, IT8152_PCI_CFG_DATA);
-
-			writel(0x4090, IT8152_PCI_CFG_ADDR);
-			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
-				0x60440000),
-			       IT8152_PCI_CFG_DATA);
-
-			writel(0x4018, IT8152_PCI_CFG_ADDR);
-			writel(0xb0000000, IT8152_PCI_CFG_DATA);
-
-			/* Configure socket 1 */
-			writel(0x418C, IT8152_PCI_CFG_ADDR);
-			writel(0x1022, IT8152_PCI_CFG_DATA);
-
-			writel(0x4180, IT8152_PCI_CFG_ADDR);
-			writel(0x3844d060, IT8152_PCI_CFG_DATA);
-
-			writel(0x4190, IT8152_PCI_CFG_ADDR);
-			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
-				0x60440000),
-			       IT8152_PCI_CFG_DATA);
-
-			writel(0x4118, IT8152_PCI_CFG_ADDR);
-			writel(0xb0000000, IT8152_PCI_CFG_DATA);
-		}
-	}
-}
-
-static struct hw_pci cmx270_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.map_irq	= cmx270_pci_map_irq,
-	.nr_controllers	= 1,
-	.setup		= it8152_pci_setup,
-	.scan		= it8152_pci_scan_bus,
-	.preinit	= cmx270_pci_preinit,
-};
-
-static int __init cmx270_init_pci(void)
-{
-	if (machine_is_armcore())
-		pci_common_init(&cmx270_pci);
-
-	return 0;
-}
-
-subsys_initcall(cmx270_init_pci);
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
deleted file mode 100644
index 48f532f..0000000
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void __cmx270_pci_init_irq(int irq_gpio);
-extern void __cmx270_pci_suspend(void);
-extern void __cmx270_pci_resume(void);
-
-#ifdef CONFIG_PCI
-#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
-#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
-#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
-#else
-#define cmx270_pci_init_irq(x) do {} while (0)
-#define cmx270_pci_suspend(x) do {} while (0)
-#define cmx270_pci_resume(x) do {} while (0)
-#endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index af003a2..df83b97 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -14,46 +14,22 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
-#include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
 #include <video/mbxfb.h>
-#include <linux/leds.h>
 
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
-#include <mach/bitfield.h>
-
-#include <asm/hardware/it8152.h>
 
 #include "generic.h"
-#include "cm-x270-pci.h"
-
-/* virtual addresses for statically mapped regions */
-#define CMX270_VIRT_BASE	(0xe8000000)
-#define CMX270_IT8152_VIRT	(CMX270_VIRT_BASE)
 
+/* physical address if local-bus attached devices */
 #define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
-#define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
 
 /* GPIO IRQ usage */
-#define GPIO10_ETHIRQ		(10)
-#define GPIO22_IT8152_IRQ	(22)
 #define GPIO83_MMC_IRQ		(83)
-#define GPIO95_GFXIRQ		(95)
 
-#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
-#define CMX270_IT8152_IRQ	IRQ_GPIO(GPIO22_IT8152_IRQ)
 #define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
-#define CMX270_GFXIRQ		IRQ_GPIO(GPIO95_GFXIRQ)
 
 /* MMC power enable */
 #define GPIO105_MMC_POWER	(105)
@@ -157,62 +133,6 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO83_GPIO,	/* MMC card detect */
 };
 
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource cmx270_dm9000_resource[] = {
-	[0] = {
-		.start = DM9000_PHYS_BASE,
-		.end   = DM9000_PHYS_BASE + 4,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DM9000_PHYS_BASE + 8,
-		.end   = DM9000_PHYS_BASE + 8 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = CMX270_ETHIRQ,
-		.end   = CMX270_ETHIRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data cmx270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device cmx270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
-	.resource	= cmx270_dm9000_resource,
-	.dev		= {
-		.platform_data = &cmx270_dm9000_platdata,
-	}
-};
-
-static void __init cmx270_init_dm9000(void)
-{
-	platform_device_register(&cmx270_dm9000_device);
-}
-#else
-static inline void cmx270_init_dm9000(void) {}
-#endif
-
-/* UCB1400 touchscreen controller */
-#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device cmx270_ts_device = {
-	.name		= "ucb1400_ts",
-	.id		= -1,
-};
-
-static void __init cmx270_init_touchscreen(void)
-{
-	platform_device_register(&cmx270_ts_device);
-}
-#else
-static inline void cmx270_init_touchscreen(void) {}
-#endif
-
 /* V3020 RTC */
 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
@@ -245,44 +165,6 @@ static void __init cmx270_init_rtc(void)
 static inline void cmx270_init_rtc(void) {}
 #endif
 
-/* CM-X270 LEDs */
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cmx270_leds[] = {
-	[0] = {
-		.name = "cm-x270:red",
-		.default_trigger = "nand-disk",
-		.gpio = 93,
-		.active_low = 1,
-	},
-	[1] = {
-		.name = "cm-x270:green",
-		.default_trigger = "heartbeat",
-		.gpio = 94,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cmx270_leds),
-	.leds = cmx270_leds,
-};
-
-static struct platform_device cmx270_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cmx270_gpio_led_pdata,
-	},
-};
-
-static void __init cmx270_init_leds(void)
-{
-	platform_device_register(&cmx270_led_device);
-}
-#else
-static inline void cmx270_init_leds(void) {}
-#endif
-
 /* 2700G graphics */
 #if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
@@ -373,238 +255,11 @@ static void __init cmx270_init_2700G(void)
 static inline void cmx270_init_2700G(void) {}
 #endif
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/*
-  Display definitions
-  keep these for backwards compatibility, although symbolic names (as
-  e.g. in lpd270.c) looks better
-*/
-#define MTYPE_STN320x240	0
-#define MTYPE_TFT640x480	1
-#define MTYPE_CRT640x480	2
-#define MTYPE_CRT800x600	3
-#define MTYPE_TFT320x240	6
-#define MTYPE_STN640x480	7
-
-static struct pxafb_mode_info generic_stn_320x240_mode = {
-	.pixclock	= 76923,
-	.bpp		= 8,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 3,
-	.vsync_len	= 2,
-	.left_margin	= 3,
-	.upper_margin	= 0,
-	.right_margin	= 3,
-	.lower_margin	= 0,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_320x240 = {
-	.modes		= &generic_stn_320x240_mode,
-	.num_modes	= 1,
-	.lccr0		= 0,
-	.lccr3		= (LCCR3_PixClkDiv(0x03) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 60,
-	.vsync_len	= 2,
-	.left_margin	= 70,
-	.upper_margin	= 10,
-	.right_margin	= 70,
-	.lower_margin	= 5,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_640x480 = {
-	.modes		= &generic_tft_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x01) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 81,
-	.upper_margin	= 33,
-	.right_margin	= 16,
-	.lower_margin	= 10,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_640x480 = {
-	.modes		= &generic_crt_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x01) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_800x600_mode = {
-	.pixclock	= 28846,
-	.bpp		= 8,
-	.xres		= 800,
-	.yres	  	= 600,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 26,
-	.upper_margin	= 21,
-	.right_margin	= 26,
-	.lower_margin	= 11,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_800x600 = {
-	.modes		= &generic_crt_800x600_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x02) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_320x240_mode = {
-	.pixclock	= 134615,
-	.bpp		= 16,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 63,
-	.vsync_len	= 7,
-	.left_margin	= 75,
-	.upper_margin	= 0,
-	.right_margin	= 15,
-	.lower_margin	= 15,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_320x240 = {
-	.modes		= &generic_tft_320x240_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x06) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_stn_640x480_mode = {
-	.pixclock	= 57692,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 4,
-	.vsync_len	= 2,
-	.left_margin	= 10,
-	.upper_margin	= 5,
-	.right_margin	= 10,
-	.lower_margin	= 5,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_640x480 = {
-	.modes		= &generic_stn_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= 0,
-	.lccr3		= (LCCR3_PixClkDiv(0x02) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
-
-static int __init cmx270_set_display(char *str)
-{
-	int disp_type = simple_strtol(str, NULL, 0);
-	switch (disp_type) {
-	case MTYPE_STN320x240:
-		cmx270_display = &generic_stn_320x240;
-		break;
-	case MTYPE_TFT640x480:
-		cmx270_display = &generic_tft_640x480;
-		break;
-	case MTYPE_CRT640x480:
-		cmx270_display = &generic_crt_640x480;
-		break;
-	case MTYPE_CRT800x600:
-		cmx270_display = &generic_crt_800x600;
-		break;
-	case MTYPE_TFT320x240:
-		cmx270_display = &generic_tft_320x240;
-		break;
-	case MTYPE_STN640x480:
-		cmx270_display = &generic_stn_640x480;
-		break;
-	default: /* fallback to CRT 640x480 */
-		cmx270_display = &generic_crt_640x480;
-		break;
-	}
-	return 1;
-}
-
-/*
-   This should be done really early to get proper configuration for
-   frame buffer.
-   Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
-   has limitied line length for kernel command line, and also it will
-   break compatibitlty with proprietary releases already in field.
-*/
-__setup("monitor=", cmx270_set_display);
-
-static void __init cmx270_init_display(void)
-{
-	set_pxa_fb_info(cmx270_display);
-}
-#else
-static inline void cmx270_init_display(void) {}
-#endif
-
 /* PXA27x OHCI controller setup */
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int cmx270_ohci_init(struct device *dev)
-{
-	/* Set the Power Control Polarity Low */
-	UHCHR = (UHCHR | UHCHR_PCPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= cmx270_ohci_init,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 };
 
 static void __init cmx270_init_ohci(void)
@@ -676,131 +331,12 @@ static void __init cmx270_init_mmc(void)
 static inline void cmx270_init_mmc(void) {}
 #endif
 
-#ifdef CONFIG_PM
-static unsigned long sleep_save_msc[10];
-
-static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
-{
-	cmx270_pci_suspend();
-
-	/* save MSC registers */
-	sleep_save_msc[0] = MSC0;
-	sleep_save_msc[1] = MSC1;
-	sleep_save_msc[2] = MSC2;
-
-	/* setup power saving mode registers */
-	PCFR = 0x0;
-	PSLR = 0xff400000;
-	PMCR  = 0x00000005;
-	PWER  = 0x80000000;
-	PFER  = 0x00000000;
-	PRER  = 0x00000000;
-	PGSR0 = 0xC0018800;
-	PGSR1 = 0x004F0002;
-	PGSR2 = 0x6021C000;
-	PGSR3 = 0x00020000;
-
-	return 0;
-}
-
-static int cmx270_resume(struct sys_device *dev)
-{
-	cmx270_pci_resume();
-
-	/* restore MSC registers */
-	MSC0 = sleep_save_msc[0];
-	MSC1 = sleep_save_msc[1];
-	MSC2 = sleep_save_msc[2];
-
-	return 0;
-}
-
-static struct sysdev_class cmx270_pm_sysclass = {
-	.name = "pm",
-	.resume = cmx270_resume,
-	.suspend = cmx270_suspend,
-};
-
-static struct sys_device cmx270_pm_device = {
-	.cls = &cmx270_pm_sysclass,
-};
-
-static int __init cmx270_pm_init(void)
-{
-	int error;
-	error = sysdev_class_register(&cmx270_pm_sysclass);
-	if (error == 0)
-		error = sysdev_register(&cmx270_pm_device);
-	return error;
-}
-#else
-static int __init cmx270_pm_init(void) { return 0; }
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
-static void __init cmx270_init_ac97(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cmx270_init_ac97(void) {}
-#endif
-
-static void __init cmx270_init(void)
+void __init cmx270_init(void)
 {
-	cmx270_pm_init();
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
 
-	cmx270_init_dm9000();
 	cmx270_init_rtc();
-	cmx270_init_display();
 	cmx270_init_mmc();
 	cmx270_init_ohci();
-	cmx270_init_ac97();
-	cmx270_init_touchscreen();
-	cmx270_init_leds();
 	cmx270_init_2700G();
 }
-
-static void __init cmx270_init_irq(void)
-{
-	pxa27x_init_irq();
-
-	cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
-}
-
-#ifdef CONFIG_PCI
-/* Map PCI companion statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-	[0] = { /* PCI bridge */
-		.virtual	= CMX270_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init cmx270_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
-
-	it8152_base_address = CMX270_IT8152_VIRT;
-}
-#else
-static void __init cmx270_map_io(void)
-{
-	pxa_map_io();
-}
-#endif
-
-MACHINE_START(ARMCORE, "Compulab CM-x270")
-	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= cmx270_map_io,
-	.init_irq	= cmx270_init_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= cmx270_init,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
new file mode 100644
index 0000000..3156b25
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -0,0 +1,224 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x2xx-pci.c
+ *
+ * PCI bios-type initialisation for PCI machines
+ *
+ * Bits taken from various places.
+ *
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/pci.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+
+#include <asm/hardware/it8152.h>
+
+unsigned long it8152_base_address;
+static int cmx2xx_it8152_irq_gpio;
+
+/*
+ * Only first 64MB of memory can be accessed via PCI.
+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
+ * This is really ugly and we need a better way of specifying
+ * DMA-capable regions of memory.
+ */
+void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
+	unsigned long *zhole_size)
+{
+	unsigned int sz = SZ_64M >> PAGE_SHIFT;
+
+	if (machine_is_armcore()) {
+		pr_info("Adjusting zones for CM-X2XX\n");
+
+		/*
+		 * Only adjust if > 64M on current system
+		 */
+		if (node || (zone_size[0] <= sz))
+			return;
+
+		zone_size[1] = zone_size[0] - sz;
+		zone_size[0] = sz;
+		zhole_size[1] = zhole_size[0];
+		zhole_size[0] = 0;
+	}
+}
+
+static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	/* clear our parent irq */
+	GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
+
+	it8152_irq_demux(irq, desc);
+}
+
+void __cmx2xx_pci_init_irq(int irq_gpio)
+{
+	it8152_init_irq();
+
+	cmx2xx_it8152_irq_gpio = irq_gpio;
+
+	set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
+
+	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx2xx_it8152_irq_demux);
+}
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_ite[10];
+
+void __cmx2xx_pci_suspend(void)
+{
+	/* save ITE state */
+	sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
+	sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
+	sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
+
+	/* Clear ITE IRQ's */
+	__raw_writel((0), IT8152_INTC_PDCNIRR);
+	__raw_writel((0), IT8152_INTC_LPCNIRR);
+}
+
+void __cmx2xx_pci_resume(void)
+{
+	/* restore IT8152 state */
+	__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
+	__raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
+	__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
+}
+#else
+void cmx2xx_pci_suspend(void) {}
+void cmx2xx_pci_resume(void) {}
+#endif
+
+/* PCI IRQ mapping*/
+static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
+
+	irq = it8152_pci_map_irq(dev, slot, pin);
+	if (irq)
+		return irq;
+
+	/*
+	  Here comes the ugly part. The routing is baseboard specific,
+	  but defining a platform for each possible base of CM-X2XX is
+	  unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
+	*/
+	/* ATXBASE PCI slot */
+	if (slot == 7)
+		return IT8152_PCI_INTA;
+
+	/* ATXBase/SB-X2XX CardBus */
+	if (slot == 8 || slot == 0)
+		return IT8152_PCI_INTB;
+
+	/* ATXBase Ethernet */
+	if (slot == 9)
+		return IT8152_PCI_INTA;
+
+	/* CM-x255 Onboard Ethernet */
+	if (slot == 15)
+		return IT8152_PCI_INTC;
+
+	/* SB-x2xx Ethernet */
+	if (slot == 16)
+		return IT8152_PCI_INTA;
+
+	/* PC104+ interrupt routing */
+	if ((slot == 17) || (slot == 19))
+		return IT8152_PCI_INTA;
+	if ((slot == 18) || (slot == 20))
+		return IT8152_PCI_INTB;
+
+	return(0);
+}
+
+static void cmx2xx_pci_preinit(void)
+{
+	pr_info("Initializing CM-X2XX PCI subsystem\n");
+
+	__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
+	if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
+		pr_info("PCI Bridge found.\n");
+
+		/* set PCI I/O base at 0 */
+		writel(0x848, IT8152_PCI_CFG_ADDR);
+		writel(0, IT8152_PCI_CFG_DATA);
+
+		/* set PCI memory base at 0 */
+		writel(0x840, IT8152_PCI_CFG_ADDR);
+		writel(0, IT8152_PCI_CFG_DATA);
+
+		writel(0x20, IT8152_GPIO_GPDR);
+
+		/* CardBus Controller on ATXbase baseboard */
+		writel(0x4000, IT8152_PCI_CFG_ADDR);
+		if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
+			pr_info("CardBus Bridge found.\n");
+
+			/* Configure socket 0 */
+			writel(0x408C, IT8152_PCI_CFG_ADDR);
+			writel(0x1022, IT8152_PCI_CFG_DATA);
+
+			writel(0x4080, IT8152_PCI_CFG_ADDR);
+			writel(0x3844d060, IT8152_PCI_CFG_DATA);
+
+			writel(0x4090, IT8152_PCI_CFG_ADDR);
+			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
+				0x60440000),
+			       IT8152_PCI_CFG_DATA);
+
+			writel(0x4018, IT8152_PCI_CFG_ADDR);
+			writel(0xb0000000, IT8152_PCI_CFG_DATA);
+
+			/* Configure socket 1 */
+			writel(0x418C, IT8152_PCI_CFG_ADDR);
+			writel(0x1022, IT8152_PCI_CFG_DATA);
+
+			writel(0x4180, IT8152_PCI_CFG_ADDR);
+			writel(0x3844d060, IT8152_PCI_CFG_DATA);
+
+			writel(0x4190, IT8152_PCI_CFG_ADDR);
+			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
+				0x60440000),
+			       IT8152_PCI_CFG_DATA);
+
+			writel(0x4118, IT8152_PCI_CFG_ADDR);
+			writel(0xb0000000, IT8152_PCI_CFG_DATA);
+		}
+	}
+}
+
+static struct hw_pci cmx2xx_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.map_irq	= cmx2xx_pci_map_irq,
+	.nr_controllers	= 1,
+	.setup		= it8152_pci_setup,
+	.scan		= it8152_pci_scan_bus,
+	.preinit	= cmx2xx_pci_preinit,
+};
+
+static int __init cmx2xx_init_pci(void)
+{
+	if (machine_is_armcore())
+		pci_common_init(&cmx2xx_pci);
+
+	return 0;
+}
+
+subsys_initcall(cmx2xx_init_pci);
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.h b/arch/arm/mach-pxa/cm-x2xx-pci.h
new file mode 100644
index 0000000..e24aad2
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.h
@@ -0,0 +1,13 @@
+extern void __cmx2xx_pci_init_irq(int irq_gpio);
+extern void __cmx2xx_pci_suspend(void);
+extern void __cmx2xx_pci_resume(void);
+
+#ifdef CONFIG_PCI
+#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x)
+#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x)
+#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x)
+#else
+#define cmx2xx_pci_init_irq(x) do {} while (0)
+#define cmx2xx_pci_suspend(x) do {} while (0)
+#define cmx2xx_pci_resume(x) do {} while (0)
+#endif
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
new file mode 100644
index 0000000..0b3ce3b
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -0,0 +1,531 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x2xx.c
+ *
+ * Copyright (C) 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+
+#include <asm/hardware/it8152.h>
+
+#include "generic.h"
+#include "cm-x2xx-pci.h"
+
+extern void cmx255_init(void);
+extern void cmx270_init(void);
+
+/* virtual addresses for statically mapped regions */
+#define CMX2XX_VIRT_BASE	(0xe8000000)
+#define CMX2XX_IT8152_VIRT	(CMX2XX_VIRT_BASE)
+
+/* physical address if local-bus attached devices */
+#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22))
+#define CMX270_DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
+
+/* leds */
+#define CMX255_GPIO_RED		(27)
+#define CMX255_GPIO_GREEN	(32)
+#define CMX270_GPIO_RED		(93)
+#define CMX270_GPIO_GREEN	(94)
+
+/* GPIO IRQ usage */
+#define GPIO22_ETHIRQ		(22)
+#define GPIO10_ETHIRQ		(10)
+#define CMX255_GPIO_IT8152_IRQ	(0)
+#define CMX270_GPIO_IT8152_IRQ	(22)
+
+#define CMX255_ETHIRQ		IRQ_GPIO(GPIO22_ETHIRQ)
+#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx255_dm9000_resource[] = {
+	[0] = {
+		.start = CMX255_DM9000_PHYS_BASE,
+		.end   = CMX255_DM9000_PHYS_BASE + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CMX255_DM9000_PHYS_BASE + 4,
+		.end   = CMX255_DM9000_PHYS_BASE + 4 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = CMX255_ETHIRQ,
+		.end   = CMX255_ETHIRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct resource cmx270_dm9000_resource[] = {
+	[0] = {
+		.start = CMX270_DM9000_PHYS_BASE,
+		.end   = CMX270_DM9000_PHYS_BASE + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CMX270_DM9000_PHYS_BASE + 8,
+		.end   = CMX270_DM9000_PHYS_BASE + 8 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = CMX270_ETHIRQ,
+		.end   = CMX270_ETHIRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device cmx2xx_dm9000_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
+	.dev		= {
+		.platform_data = &cmx270_dm9000_platdata,
+	}
+};
+
+static void __init cmx2xx_init_dm9000(void)
+{
+	if (cpu_is_pxa25x())
+		cmx2xx_dm9000_device.resource = cmx255_dm9000_resource;
+	else
+		cmx2xx_dm9000_device.resource = cmx270_dm9000_resource;
+	platform_device_register(&cmx2xx_dm9000_device);
+}
+#else
+static inline void cmx2xx_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device cmx2xx_ts_device = {
+	.name		= "ucb1400_ts",
+	.id		= -1,
+};
+
+static void __init cmx2xx_init_touchscreen(void)
+{
+	platform_device_register(&cmx2xx_ts_device);
+}
+#else
+static inline void cmx2xx_init_touchscreen(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx2xx_leds[] = {
+	[0] = {
+		.name = "cm-x2xx:red",
+		.default_trigger = "nand-disk",
+		.active_low = 1,
+	},
+	[1] = {
+		.name = "cm-x2xx:green",
+		.default_trigger = "heartbeat",
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cmx2xx_leds),
+	.leds = cmx2xx_leds,
+};
+
+static struct platform_device cmx2xx_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx2xx_gpio_led_pdata,
+	},
+};
+
+static void __init cmx2xx_init_leds(void)
+{
+	if (cpu_is_pxa25x()) {
+		cmx2xx_leds[0].gpio = CMX255_GPIO_RED;
+		cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN;
+	} else {
+		cmx2xx_leds[0].gpio = CMX270_GPIO_RED;
+		cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN;
+	}
+	platform_device_register(&cmx2xx_led_device);
+}
+#else
+static inline void cmx2xx_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+/*
+  Display definitions
+  keep these for backwards compatibility, although symbolic names (as
+  e.g. in lpd270.c) looks better
+*/
+#define MTYPE_STN320x240	0
+#define MTYPE_TFT640x480	1
+#define MTYPE_CRT640x480	2
+#define MTYPE_CRT800x600	3
+#define MTYPE_TFT320x240	6
+#define MTYPE_STN640x480	7
+
+static struct pxafb_mode_info generic_stn_320x240_mode = {
+	.pixclock	= 76923,
+	.bpp		= 8,
+	.xres		= 320,
+	.yres		= 240,
+	.hsync_len	= 3,
+	.vsync_len	= 2,
+	.left_margin	= 3,
+	.upper_margin	= 0,
+	.right_margin	= 3,
+	.lower_margin	= 0,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_320x240 = {
+	.modes		= &generic_stn_320x240_mode,
+	.num_modes	= 1,
+	.lccr0		= 0,
+	.lccr3		= (LCCR3_PixClkDiv(0x03) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_tft_640x480_mode = {
+	.pixclock	= 38461,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 60,
+	.vsync_len	= 2,
+	.left_margin	= 70,
+	.upper_margin	= 10,
+	.right_margin	= 70,
+	.lower_margin	= 5,
+	.sync		= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_640x480 = {
+	.modes		= &generic_tft_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x01) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_crt_640x480_mode = {
+	.pixclock	= 38461,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 63,
+	.vsync_len	= 2,
+	.left_margin	= 81,
+	.upper_margin	= 33,
+	.right_margin	= 16,
+	.lower_margin	= 10,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_640x480 = {
+	.modes		= &generic_crt_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x01) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_crt_800x600_mode = {
+	.pixclock	= 28846,
+	.bpp		= 8,
+	.xres		= 800,
+	.yres	  	= 600,
+	.hsync_len	= 63,
+	.vsync_len	= 2,
+	.left_margin	= 26,
+	.upper_margin	= 21,
+	.right_margin	= 26,
+	.lower_margin	= 11,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_800x600 = {
+	.modes		= &generic_crt_800x600_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x02) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_tft_320x240_mode = {
+	.pixclock	= 134615,
+	.bpp		= 16,
+	.xres		= 320,
+	.yres		= 240,
+	.hsync_len	= 63,
+	.vsync_len	= 7,
+	.left_margin	= 75,
+	.upper_margin	= 0,
+	.right_margin	= 15,
+	.lower_margin	= 15,
+	.sync		= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_320x240 = {
+	.modes		= &generic_tft_320x240_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x06) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_stn_640x480_mode = {
+	.pixclock	= 57692,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 4,
+	.vsync_len	= 2,
+	.left_margin	= 10,
+	.upper_margin	= 5,
+	.right_margin	= 10,
+	.lower_margin	= 5,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_640x480 = {
+	.modes		= &generic_stn_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= 0,
+	.lccr3		= (LCCR3_PixClkDiv(0x02) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480;
+
+static int __init cmx2xx_set_display(char *str)
+{
+	int disp_type = simple_strtol(str, NULL, 0);
+	switch (disp_type) {
+	case MTYPE_STN320x240:
+		cmx2xx_display = &generic_stn_320x240;
+		break;
+	case MTYPE_TFT640x480:
+		cmx2xx_display = &generic_tft_640x480;
+		break;
+	case MTYPE_CRT640x480:
+		cmx2xx_display = &generic_crt_640x480;
+		break;
+	case MTYPE_CRT800x600:
+		cmx2xx_display = &generic_crt_800x600;
+		break;
+	case MTYPE_TFT320x240:
+		cmx2xx_display = &generic_tft_320x240;
+		break;
+	case MTYPE_STN640x480:
+		cmx2xx_display = &generic_stn_640x480;
+		break;
+	default: /* fallback to CRT 640x480 */
+		cmx2xx_display = &generic_crt_640x480;
+		break;
+	}
+	return 1;
+}
+
+/*
+   This should be done really early to get proper configuration for
+   frame buffer.
+   Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader
+   has limitied line length for kernel command line, and also it will
+   break compatibitlty with proprietary releases already in field.
+*/
+__setup("monitor=", cmx2xx_set_display);
+
+static void __init cmx2xx_init_display(void)
+{
+	set_pxa_fb_info(cmx2xx_display);
+}
+#else
+static inline void cmx2xx_init_display(void) {}
+#endif
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_msc[10];
+
+static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
+{
+	cmx2xx_pci_suspend();
+
+	/* save MSC registers */
+	sleep_save_msc[0] = MSC0;
+	sleep_save_msc[1] = MSC1;
+	sleep_save_msc[2] = MSC2;
+
+	/* setup power saving mode registers */
+	PCFR = 0x0;
+	PSLR = 0xff400000;
+	PMCR  = 0x00000005;
+	PWER  = 0x80000000;
+	PFER  = 0x00000000;
+	PRER  = 0x00000000;
+	PGSR0 = 0xC0018800;
+	PGSR1 = 0x004F0002;
+	PGSR2 = 0x6021C000;
+	PGSR3 = 0x00020000;
+
+	return 0;
+}
+
+static int cmx2xx_resume(struct sys_device *dev)
+{
+	cmx2xx_pci_resume();
+
+	/* restore MSC registers */
+	MSC0 = sleep_save_msc[0];
+	MSC1 = sleep_save_msc[1];
+	MSC2 = sleep_save_msc[2];
+
+	return 0;
+}
+
+static struct sysdev_class cmx2xx_pm_sysclass = {
+	.name = "pm",
+	.resume = cmx2xx_resume,
+	.suspend = cmx2xx_suspend,
+};
+
+static struct sys_device cmx2xx_pm_device = {
+	.cls = &cmx2xx_pm_sysclass,
+};
+
+static int __init cmx2xx_pm_init(void)
+{
+	int error;
+	error = sysdev_class_register(&cmx2xx_pm_sysclass);
+	if (error == 0)
+		error = sysdev_register(&cmx2xx_pm_device);
+	return error;
+}
+#else
+static int __init cmx2xx_pm_init(void) { return 0; }
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx2xx_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx2xx_init_ac97(void) {}
+#endif
+
+static void __init cmx2xx_init(void)
+{
+	cmx2xx_pm_init();
+
+	if (cpu_is_pxa25x())
+		cmx255_init();
+	else
+		cmx270_init();
+
+	cmx2xx_init_dm9000();
+	cmx2xx_init_display();
+	cmx2xx_init_ac97();
+	cmx2xx_init_touchscreen();
+	cmx2xx_init_leds();
+}
+
+static void __init cmx2xx_init_irq(void)
+{
+	pxa27x_init_irq();
+
+	if (cpu_is_pxa25x()) {
+		pxa25x_init_irq();
+		cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
+	} else {
+		pxa27x_init_irq();
+		cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ);
+	}
+}
+
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx2xx_io_desc[] __initdata = {
+	[0] = { /* PCI bridge */
+		.virtual	= CMX2XX_IT8152_VIRT,
+		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init cmx2xx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
+
+	it8152_base_address = CMX2XX_IT8152_VIRT;
+}
+#else
+static void __init cmx2xx_map_io(void)
+{
+	pxa_map_io();
+}
+#endif
+
+MACHINE_START(ARMCORE, "Compulab CM-X2XX")
+	.boot_params	= 0xa0000100,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= cmx2xx_map_io,
+	.init_irq	= cmx2xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= cmx2xx_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
new file mode 100644
index 0000000..deb46cd
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -0,0 +1,465 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x300.c
+ *
+ * Support for the CompuLab CM-X300 modules
+ *
+ * Copyright (C) 2008 CompuLab Ltd.
+ *
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/mfp-pxa300.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
+#include <mach/pxa3xx_nand.h>
+
+#include <asm/mach/map.h>
+
+#include "generic.h"
+
+#define CM_X300_ETH_PHYS	0x08000010
+
+#define GPIO82_MMC2_IRQ		(82)
+#define GPIO85_MMC2_WP		(85)
+
+#define	CM_X300_MMC2_IRQ	IRQ_GPIO(GPIO82_MMC2_IRQ)
+
+static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+	/* LCD */
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+
+	/* BTUART */
+	GPIO111_UART2_RTS,
+	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
+	GPIO113_UART2_TXD,
+	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
+
+	/* STUART */
+	GPIO109_UART3_TXD,
+	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
+
+	/* AC97 */
+	GPIO23_AC97_nACRESET,
+	GPIO24_AC97_SYSCLK,
+	GPIO29_AC97_BITCLK,
+	GPIO25_AC97_SDATA_IN_0,
+	GPIO27_AC97_SDATA_OUT,
+	GPIO28_AC97_SYNC,
+
+	/* Keypad */
+	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
+	GPIO121_KP_MKOUT_0,
+	GPIO122_KP_MKOUT_1,
+	GPIO123_KP_MKOUT_2,
+	GPIO124_KP_MKOUT_3,
+	GPIO125_KP_MKOUT_4,
+	GPIO4_2_KP_MKOUT_5,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
+
+	/* MMC2 */
+	GPIO9_MMC2_DAT0,
+	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO11_MMC2_DAT2,
+	GPIO12_MMC2_DAT3,
+	GPIO13_MMC2_CLK,
+	GPIO14_MMC2_CMD,
+
+	/* FFUART */
+	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
+	GPIO31_UART1_TXD,
+	GPIO32_UART1_CTS,
+	GPIO37_UART1_RTS,
+	GPIO33_UART1_DCD,
+	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
+	GPIO35_UART1_RI,
+	GPIO36_UART1_DTR,
+
+	/* GPIOs */
+	GPIO79_GPIO,			/* LED */
+	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
+	GPIO85_GPIO,			/* MMC WP */
+	GPIO99_GPIO,			/* Ethernet IRQ */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= CM_X300_ETH_PHYS,
+		.end	= CM_X300_ETH_PHYS + 0x3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= CM_X300_ETH_PHYS + 0x4,
+		.end	= CM_X300_ETH_PHYS + 0x4 + 500,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct dm9000_plat_data cm_x300_dm9000_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+	.dev		= {
+		.platform_data = &cm_x300_dm9000_platdata,
+	}
+
+};
+
+static void __init cm_x300_init_dm9000(void)
+{
+	platform_device_register(&dm9000_device);
+}
+#else
+static inline void cm_x300_init_dm9000(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info cm_x300_lcd_modes[] = {
+	[0] = {
+		.pixclock	= 38000,
+		.bpp		= 16,
+		.xres		= 480,
+		.yres		= 640,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 0,
+		.right_margin	= 24,
+		.lower_margin	= 4,
+		.cmap_greyscale	= 0,
+	},
+	[1] = {
+		.pixclock	= 153800,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 88,
+		.lower_margin	= 2,
+		.cmap_greyscale	= 0,
+	},
+};
+
+static struct pxafb_mach_info cm_x300_lcd = {
+	.modes			= cm_x300_lcd_modes,
+	.num_modes		= 2,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init cm_x300_init_lcd(void)
+{
+	set_pxa_fb_info(&cm_x300_lcd);
+}
+#else
+static inline void cm_x300_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition cm_x300_nand_partitions[] = {
+	[0] = {
+		.name        = "OBM",
+		.offset      = 0,
+		.size        = SZ_256K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "U-Boot",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Environment",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K,
+	},
+	[3] = {
+		.name        = "reserved",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K + SZ_1M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[4] = {
+		.name        = "kernel",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_4M,
+	},
+	[5] = {
+		.name        = "fs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= cm_x300_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
+};
+
+static void __init cm_x300_init_nand(void)
+{
+	pxa3xx_set_nand_info(&cm_x300_nand_info);
+}
+#else
+static inline void cm_x300_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+   no detection/ro pins */
+static int cm_x300_mci_init(struct device *dev,
+			    irq_handler_t cm_x300_detect_int,
+			    void *data)
+{
+	return 0;
+}
+
+static void cm_x300_mci_exit(struct device *dev, void *data)
+{
+}
+
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= cm_x300_mci_init,
+	.exit		= cm_x300_mci_exit,
+};
+
+static int cm_x300_mci2_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO85_MMC2_WP);
+}
+
+static int cm_x300_mci2_init(struct device *dev,
+			     irq_handler_t cm_x300_detect_int,
+			     void *data)
+{
+	int err;
+
+	/*
+	 * setup GPIO for CM-X300 MMC controller
+	 */
+	err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
+	if (err)
+		goto err_request_cd;
+	gpio_direction_input(GPIO82_MMC2_IRQ);
+
+	err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
+	if (err)
+		goto err_request_wp;
+	gpio_direction_input(GPIO85_MMC2_WP);
+
+	err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: MMC/SD/SDIO: "
+				"can't request card detect IRQ\n", __func__);
+		goto err_request_irq;
+	}
+
+	return 0;
+
+err_request_irq:
+	gpio_free(GPIO85_MMC2_WP);
+err_request_wp:
+	gpio_free(GPIO82_MMC2_IRQ);
+err_request_cd:
+	return err;
+}
+
+static void cm_x300_mci2_exit(struct device *dev, void *data)
+{
+	free_irq(CM_X300_MMC2_IRQ, data);
+	gpio_free(GPIO82_MMC2_IRQ);
+	gpio_free(GPIO85_MMC2_WP);
+}
+
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= cm_x300_mci2_init,
+	.exit		= cm_x300_mci2_exit,
+	.get_ro		= cm_x300_mci2_ro,
+};
+
+static void __init cm_x300_init_mmc(void)
+{
+	pxa_set_mci_info(&cm_x300_mci_platform_data);
+	pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
+}
+#else
+static inline void cm_x300_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+};
+
+static void __init cm_x300_init_ohci(void)
+{
+	pxa_set_ohci_info(&cm_x300_ohci_platform_data);
+}
+#else
+static inline void cm_x300_init_ohci(void) {}
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cm_x300_leds[] = {
+	[0] = {
+		.name = "cm-x300:green",
+		.default_trigger = "heartbeat",
+		.gpio = 79,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cm_x300_leds),
+	.leds = cm_x300_leds,
+};
+
+static struct platform_device cm_x300_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_x300_gpio_led_pdata,
+	},
+};
+
+static void __init cm_x300_init_leds(void)
+{
+	platform_device_register(&cm_x300_led_device);
+}
+#else
+static inline void cm_x300_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+/* PCA9555 */
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
+	.gpio_base = 128,
+};
+
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
+	.gpio_base = 144,
+};
+
+static struct i2c_board_info cm_x300_gpio_ext_info[] = {
+	[0] = {
+		I2C_BOARD_INFO("pca9555", 0x24),
+		.platform_data = &cm_x300_gpio_ext_pdata_0,
+	},
+	[1] = {
+		I2C_BOARD_INFO("pca9555", 0x25),
+		.platform_data = &cm_x300_gpio_ext_pdata_1,
+	},
+};
+
+static void __init cm_x300_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, cm_x300_gpio_ext_info,
+				ARRAY_SIZE(cm_x300_gpio_ext_info));
+}
+#else
+static inline void cm_x300_init_i2c(void) {}
+#endif
+
+static void __init cm_x300_init(void)
+{
+	/* board-processor specific GPIO initialization */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+
+	cm_x300_init_dm9000();
+	cm_x300_init_lcd();
+	cm_x300_init_ohci();
+	cm_x300_init_mmc();
+	cm_x300_init_nand();
+	cm_x300_init_leds();
+	cm_x300_init_i2c();
+}
+
+MACHINE_START(CM_X300, "CM-X300 module")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= cm_x300_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index abce13c..e847362 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -29,12 +29,17 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 #include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
 #include <mach/colibri.h>
 
 #include "generic.h"
 #include "devices.h"
 
+static unsigned long colibri_pin_config[] __initdata = {
+	GPIO78_nCS_2,	/* Ethernet CS */
+	GPIO114_GPIO,	/* Ethernet IRQ */
+};
+
 /*
  * Flash
  */
@@ -116,9 +121,7 @@ static struct platform_device *colibri_devices[] __initdata = {
 
 static void __init colibri_init(void)
 {
-	/* DM9000 LAN */
-	pxa_gpio_mode(GPIO78_nCS_2_MD);
-	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config));
 
 	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index e703a8d..65558d6 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -20,7 +20,12 @@
 #include <linux/interrupt.h>
 #include <linux/mmc/host.h>
 #include <linux/pm.h>
+#include <linux/gpio.h>
 #include <linux/backlight.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
 #include <video/w100fb.h>
 
 #include <asm/setup.h>
@@ -28,7 +33,6 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include <asm/mach/arch.h>
@@ -37,11 +41,12 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
 #include <mach/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/corgi.h>
 #include <mach/sharpsl.h>
 
@@ -52,6 +57,61 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long corgi_pin_config[] __initdata = {
+	/* Static Memory I/O */
+	GPIO78_nCS_2,	/* w100fb */
+	GPIO80_nCS_4,	/* scoop */
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
+
+	/* Infra-Red */
+	GPIO47_FICP_TXD,
+	GPIO46_FICP_RXD,
+
+	/* FFUART */
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+	GPIO39_FFUART_TXD,
+	GPIO37_FFUART_DSR,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* GPIO */
+	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
+	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
+	GPIO33_GPIO,	/* CORGI_GPIO_SD_PWR */
+	GPIO22_GPIO,	/* CORGI_GPIO_IR_ON */
+	GPIO44_GPIO,	/* CORGI_GPIO_HSYNC */
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
 
 /*
  * Corgi SCOOP Device
@@ -67,6 +127,7 @@ static struct resource corgi_scoop_resources[] = {
 static struct scoop_config corgi_scoop_setup = {
 	.io_dir 	= CORGI_SCOOP_IO_DIR,
 	.io_out		= CORGI_SCOOP_IO_OUT,
+	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
 };
 
 struct platform_device corgiscoop_device = {
@@ -79,27 +140,6 @@ struct platform_device corgiscoop_device = {
 	.resource	= corgi_scoop_resources,
 };
 
-static void corgi_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
 static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 {
 	.dev        = &corgiscoop_device.dev,
@@ -112,58 +152,10 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config corgi_pcmcia_config = {
 	.devs         = &corgi_pcmcia_scoop[0],
 	.num_devs     = 1,
-	.pcmcia_init  = corgi_pcmcia_init,
 };
 
 EXPORT_SYMBOL(corgiscoop_device);
 
-
-/*
- * Corgi SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
- */
-struct platform_device corgissp_device = {
-	.name		= "corgi-ssp",
-	.dev		= {
- 		.parent = &corgiscoop_device.dev,
-	},
-	.id		= -1,
-};
-
-struct corgissp_machinfo corgi_ssp_machinfo = {
-	.port		= 1,
-	.cs_lcdcon	= CORGI_GPIO_LCDCON_CS,
-	.cs_ads7846	= CORGI_GPIO_ADS7846_CS,
-	.cs_max1111	= CORGI_GPIO_MAX1111_CS,
-	.clk_lcdcon	= 76,
-	.clk_ads7846	= 2,
-	.clk_max1111	= 8,
-};
-
-
-/*
- * LCD/Framebuffer
- */
-static void w100_lcdtg_suspend(struct w100fb_par *par)
-{
-	corgi_lcdtg_suspend();
-}
-
-static void w100_lcdtg_init(struct w100fb_par *par)
-{
-	corgi_lcdtg_hw_init(par->xres);
-}
-
-
-static struct w100_tg_info corgi_lcdtg_info = {
-	.change  = w100_lcdtg_init,
-	.suspend = w100_lcdtg_suspend,
-	.resume  = w100_lcdtg_init,
-};
-
 static struct w100_mem_info corgi_fb_mem = {
 	.ext_cntl          = 0x00040003,
 	.sdram_mode_reg    = 0x00650021,
@@ -242,7 +234,6 @@ static struct w100_mode corgi_fb_modes[] = {
 };
 
 static struct w100fb_mach_info corgi_fb_info = {
-	.tg         = &corgi_lcdtg_info,
 	.init_mode  = INIT_MODE_ROTATED,
 	.mem        = &corgi_fb_mem,
 	.regs       = &corgi_fb_regs,
@@ -268,60 +259,10 @@ static struct platform_device corgifb_device = {
 	.resource	= corgi_fb_resources,
 	.dev            = {
 		.platform_data = &corgi_fb_info,
-		.parent = &corgissp_device.dev,
 	},
 
 };
 
-
-/*
- * Corgi Backlight Device
- */
-static void corgi_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static void corgi_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via SCOOP */
-	if (intensity & 0x0020)
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-	else
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-}
-
-static struct generic_bl_info corgi_bl_machinfo = {
-	.name = "corgi-bl",
-	.max_intensity = 0x2f,
-	.default_intensity = 0x1f,
-	.limit_mask = 0x0b,
-	.set_bl_intensity = corgi_bl_set_intensity,
-	.kick_battery = corgi_bl_kick_battery,
-};
-
-static struct platform_device corgibl_device = {
-	.name		= "generic-bl",
-	.dev		= {
- 		.parent = &corgifb_device.dev,
-		.platform_data	= &corgi_bl_machinfo,
-	},
-	.id		= -1,
-};
-
-
 /*
  * Corgi Keyboard Device
  */
@@ -330,75 +271,35 @@ static struct platform_device corgikbd_device = {
 	.id		= -1,
 };
 
-
 /*
  * Corgi LEDs
  */
-static struct platform_device corgiled_device = {
-	.name		= "corgi-led",
-	.id		= -1,
-};
-
-
-/*
- * Corgi Touch Screen Device
- */
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
-
-static void inline sharpsl_wait_sync(int gpio)
-{
-	while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
-	while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
-}
-
-static unsigned long corgi_get_hsync_invperiod(void)
-{
-	if (!get_hsync_invperiod)
-		get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
-	if (!get_hsync_invperiod)
-		return 0;
-
-	return get_hsync_invperiod(&corgifb_device.dev);
-}
-
-static void corgi_put_hsync(void)
-{
-	if (get_hsync_invperiod)
-		symbol_put(w100fb_get_hsynclen);
-	get_hsync_invperiod = NULL;
-}
-
-static void corgi_wait_hsync(void)
-{
-	sharpsl_wait_sync(CORGI_GPIO_HSYNC);
-}
-
-static struct resource corgits_resources[] = {
-	[0] = {
-		.start		= CORGI_IRQ_GPIO_TP_INT,
-		.end		= CORGI_IRQ_GPIO_TP_INT,
-		.flags		= IORESOURCE_IRQ,
+static struct gpio_led corgi_gpio_leds[] = {
+	{
+		.name			= "corgi:amber:charge",
+		.default_trigger	= "sharpsl-charge",
+		.gpio			= CORGI_GPIO_LED_ORANGE,
+	},
+	{
+		.name			= "corgi:green:mail",
+		.default_trigger	= "nand-disk",
+		.gpio			= CORGI_GPIO_LED_GREEN,
 	},
 };
 
-static struct corgits_machinfo  corgi_ts_machinfo = {
-	.get_hsync_invperiod = corgi_get_hsync_invperiod,
-	.put_hsync           = corgi_put_hsync,
-	.wait_hsync          = corgi_wait_hsync,
+static struct gpio_led_platform_data corgi_gpio_leds_info = {
+	.leds		= corgi_gpio_leds,
+	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
 };
 
-static struct platform_device corgits_device = {
-	.name		= "corgi-ts",
+static struct platform_device corgiled_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
 	.dev		= {
- 		.parent = &corgissp_device.dev,
-		.platform_data	= &corgi_ts_machinfo,
+		.platform_data = &corgi_gpio_leds_info,
 	},
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(corgits_resources),
-	.resource	= corgits_resources,
 };
 
-
 /*
  * MMC/SD Device
  *
@@ -411,20 +312,42 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo
 {
 	int err;
 
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-	pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
-	pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
+	err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
+	if (err)
+		goto err_out;
 
-	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+	err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
+	if (err)
+		goto err_free_1;
 
-	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
 	if (err)
-		printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		goto err_free_2;
 
+	gpio_direction_input(CORGI_GPIO_nSD_DETECT);
+	gpio_direction_input(CORGI_GPIO_nSD_WP);
+	gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
+
+	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
+				IRQF_DISABLED | IRQF_TRIGGER_RISING |
+				IRQF_TRIGGER_FALLING,
+				"MMC card detect", data);
+	if (err) {
+		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+				__func__);
+		goto err_free_3;
+	}
+	return 0;
+
+err_free_3:
+	gpio_free(CORGI_GPIO_SD_PWR);
+err_free_2:
+	gpio_free(CORGI_GPIO_nSD_WP);
+err_free_1:
+	gpio_free(CORGI_GPIO_nSD_DETECT);
+err_out:
 	return err;
 }
 
@@ -432,20 +355,20 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask)
-		GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
-	else
-		GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
+	gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
 }
 
 static int corgi_mci_get_ro(struct device *dev)
 {
-	return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
+	return gpio_get_value(CORGI_GPIO_nSD_WP);
 }
 
 static void corgi_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(CORGI_GPIO_SD_PWR);
+	gpio_free(CORGI_GPIO_nSD_WP);
+	gpio_free(CORGI_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data corgi_mci_platform_data = {
@@ -462,16 +385,32 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
  */
 static void corgi_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF)
-		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
-	else
-		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
 	pxa2xx_transceiver_mode(dev, mode);
 }
 
+static int corgi_irda_startup(struct device *dev)
+{
+	int err;
+
+	err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
+	if (err)
+		return err;
+
+	gpio_direction_output(CORGI_GPIO_IR_ON, 1);
+	return 0;
+}
+
+static void corgi_irda_shutdown(struct device *dev)
+{
+	gpio_free(CORGI_GPIO_IR_ON);
+}
+
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = corgi_irda_transceiver_mode,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= corgi_irda_transceiver_mode,
+	.startup		= corgi_irda_startup,
+	.shutdown		= corgi_irda_shutdown,
 };
 
 
@@ -483,14 +422,129 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
+static struct pxa2xx_spi_master corgi_spi_info = {
+	.num_chipselect	= 3,
+};
+
+static struct ads7846_platform_data corgi_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= CORGI_GPIO_TP_INT,
+};
+
+static void corgi_ads7846_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_ads7846_chip = {
+	.cs_control	= corgi_ads7846_cs,
+};
+
+static void corgi_bl_kick_battery(void)
+{
+	void (*kick_batt)(void);
+
+	kick_batt = symbol_get(sharpsl_battery_kick);
+	if (kick_batt) {
+		kick_batt();
+		symbol_put(sharpsl_battery_kick);
+	}
+}
+
+static struct corgi_lcd_platform_data corgi_lcdcon_info = {
+	.init_mode		= CORGI_LCD_MODE_VGA,
+	.max_intensity		= 0x2f,
+	.default_intensity	= 0x1f,
+	.limit_mask		= 0x0b,
+	.gpio_backlight_cont	= CORGI_GPIO_BACKLIGHT_CONT,
+	.gpio_backlight_on	= -1,
+	.kick_battery		= corgi_bl_kick_battery,
+};
+
+static void corgi_lcdcon_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
+	.cs_control	= corgi_lcdcon_cs,
+};
+
+static void corgi_max1111_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_max1111_chip = {
+	.cs_control	= corgi_max1111_cs,
+};
+
+static struct spi_board_info corgi_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 1200000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.platform_data	= &corgi_ads7846_info,
+		.controller_data= &corgi_ads7846_chip,
+		.irq		= gpio_to_irq(CORGI_GPIO_TP_INT),
+	}, {
+		.modalias	= "corgi-lcd",
+		.max_speed_hz	= 50000,
+		.bus_num	= 1,
+		.chip_select	= 1,
+		.platform_data	= &corgi_lcdcon_info,
+		.controller_data= &corgi_lcdcon_chip,
+	}, {
+		.modalias	= "max1111",
+		.max_speed_hz	= 450000,
+		.bus_num	= 1,
+		.chip_select	= 2,
+		.controller_data= &corgi_max1111_chip,
+	},
+};
+
+static void __init corgi_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
+	if (err)
+		return;
+
+	err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
+	if (err)
+		goto err_free_1;
+
+	err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
+	if (err)
+		goto err_free_2;
+
+	gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
+	gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
+	gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
+
+	pxa2xx_set_spi_info(1, &corgi_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
+	return;
+
+err_free_2:
+	gpio_free(CORGI_GPIO_LCDCON_CS);
+err_free_1:
+	gpio_free(CORGI_GPIO_ADS7846_CS);
+}
+#else
+static inline void corgi_init_spi(void) {}
+#endif
 
 static struct platform_device *devices[] __initdata = {
 	&corgiscoop_device,
-	&corgissp_device,
 	&corgifb_device,
 	&corgikbd_device,
-	&corgibl_device,
-	&corgits_device,
 	&corgiled_device,
 };
 
@@ -498,7 +552,8 @@ static void corgi_poweroff(void)
 {
 	if (!machine_is_corgi())
 		/* Green LED off tells the bootloader to halt */
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
+
 	arm_machine_restart('h');
 }
 
@@ -506,7 +561,8 @@ static void corgi_restart(char mode)
 {
 	if (!machine_is_corgi())
 		/* Green LED on tells the bootloader to reboot */
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
+
 	arm_machine_restart('h');
 }
 
@@ -515,20 +571,12 @@ static void __init corgi_init(void)
 	pm_power_off = corgi_poweroff;
 	arm_pm_restart = corgi_restart;
 
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
 
-	corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
-	pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
-	pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
+	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 311baf1..411607b 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -20,7 +20,6 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <mach/akita.h>
 #include <mach/corgi.h>
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 35bbfcc..eb7d6c9 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -21,7 +21,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
 
 #include <mach/sharpsl.h>
 #include <mach/corgi.h>
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
deleted file mode 100644
index 6f5569b..0000000
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/cpu-pxa.c
- *
- *  Copyright (C) 2002,2003 Intrinsyc Software
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * History:
- *   31-Jul-2002 : Initial version [FB]
- *   29-Jan-2003 : added PXA255 support [FB]
- *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
- *
- * Note:
- *   This driver may change the memory bus clock rate, but will not do any
- *   platform specific access timing changes... for example if you have flash
- *   memory connected to CS0, you will need to register a platform specific
- *   notifier which will adjust the memory access strobes to maintain a
- *   minimum strobe width.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-
-#ifdef DEBUG
-static unsigned int freq_debug;
-module_param(freq_debug, uint, 0);
-MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
-#else
-#define freq_debug  0
-#endif
-
-static unsigned int pxa27x_maxfreq;
-module_param(pxa27x_maxfreq, uint, 0);
-MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
-		 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
-
-typedef struct {
-	unsigned int khz;
-	unsigned int membus;
-	unsigned int cccr;
-	unsigned int div2;
-	unsigned int cclkcfg;
-} pxa_freqs_t;
-
-/* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF	64	/* standard 64ms SDRAM */
-#define SDRAM_ROWS	4096	/* 64MB=8192 32MB=4096 */
-
-#define CCLKCFG_TURBO		0x1
-#define CCLKCFG_FCS		0x2
-#define CCLKCFG_HALFTURBO	0x4
-#define CCLKCFG_FASTBUS		0x8
-#define MDREFR_DB2_MASK		(MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK		0xFFF
-
-/*
- * PXA255 definitions
- */
-/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
-#define CCLKCFG			CCLKCFG_TURBO | CCLKCFG_FCS
-
-static pxa_freqs_t pxa255_run_freqs[] =
-{
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500,  99500, 0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
-	{132700, 132700, 0x123, 1,  CCLKCFG},	/* 133,  133,   66,   66  */
-	{199100,  99500, 0x141, 0,  CCLKCFG},	/* 199,  199,   99,   99  */
-	{265400, 132700, 0x143, 1,  CCLKCFG},	/* 265,  265,  133,   66  */
-	{331800, 165900, 0x145, 1,  CCLKCFG},	/* 331,  331,  166,   83  */
-	{398100,  99500, 0x161, 0,  CCLKCFG},	/* 398,  398,  196,   99  */
-};
-
-/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
-static pxa_freqs_t pxa255_turbo_freqs[] =
-{
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500, 99500,  0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
-	{199100, 99500,  0x221, 0,  CCLKCFG},	/*  99,  199,   50,   99  */
-	{298500, 99500,  0x321, 0,  CCLKCFG},	/*  99,  287,   50,   99  */
-	{298600, 99500,  0x1c1, 0,  CCLKCFG},	/* 199,  287,   99,   99  */
-	{398100, 99500,  0x241, 0,  CCLKCFG},	/* 199,  398,   99,   99  */
-};
-
-#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
-#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
-
-static struct cpufreq_frequency_table
-	pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
-static struct cpufreq_frequency_table
-	pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
-
-/*
- * PXA270 definitions
- *
- * For the PXA27x:
- * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
- *
- * A = 0 => memory controller clock from table 3-7,
- * A = 1 => memory controller clock = system bus clock
- * Run mode frequency	= 13 MHz * L
- * Turbo mode frequency = 13 MHz * L * N
- * System bus frequency = 13 MHz * L / (B + 1)
- *
- * In CCCR:
- * A = 1
- * L = 16	  oscillator to run mode ratio
- * 2N = 6	  2 * (turbo mode to run mode ratio)
- *
- * In CCLKCFG:
- * B = 1	  Fast bus mode
- * HT = 0	  Half-Turbo mode
- * T = 1	  Turbo mode
- *
- * For now, just support some of the combinations in table 3-7 of
- * PXA27x Processor Family Developer's Manual to simplify frequency
- * change sequences.
- */
-#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
-#define CCLKCFG2(B, HT, T) \
-  (CCLKCFG_FCS | \
-   ((B)  ? CCLKCFG_FASTBUS : 0) | \
-   ((HT) ? CCLKCFG_HALFTURBO : 0) | \
-   ((T)  ? CCLKCFG_TURBO : 0))
-
-static pxa_freqs_t pxa27x_freqs[] = {
-	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1)},
-	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1)},
-	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
-	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
-	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
-	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
-	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
-};
-
-#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
-static struct cpufreq_frequency_table
-	pxa27x_freq_table[NUM_PXA27x_FREQS+1];
-
-extern unsigned get_clk_frequency_khz(int info);
-
-static void find_freq_tables(struct cpufreq_policy *policy,
-			     struct cpufreq_frequency_table **freq_table,
-			     pxa_freqs_t **pxa_freqs)
-{
-	if (cpu_is_pxa25x()) {
-		if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
-			*pxa_freqs = pxa255_run_freqs;
-			*freq_table = pxa255_run_freq_table;
-		} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
-			*pxa_freqs = pxa255_turbo_freqs;
-			*freq_table = pxa255_turbo_freq_table;
-		} else {
-			printk("CPU PXA: Unknown policy found. "
-			       "Using CPUFREQ_POLICY_PERFORMANCE\n");
-			*pxa_freqs = pxa255_run_freqs;
-			*freq_table = pxa255_run_freq_table;
-		}
-	}
-	if (cpu_is_pxa27x()) {
-		*pxa_freqs = pxa27x_freqs;
-		*freq_table = pxa27x_freq_table;
-	}
-}
-
-static void pxa27x_guess_max_freq(void)
-{
-	if (!pxa27x_maxfreq) {
-		pxa27x_maxfreq = 416000;
-		printk(KERN_INFO "PXA CPU 27x max frequency not defined "
-		       "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
-		       pxa27x_maxfreq);
-	} else {
-		pxa27x_maxfreq *= 1000;
-	}
-}
-
-static u32 mdrefr_dri(unsigned int freq)
-{
-	u32 dri = 0;
-
-	if (cpu_is_pxa25x())
-		dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
-	if (cpu_is_pxa27x())
-		dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
-	return dri;
-}
-
-/* find a valid frequency point */
-static int pxa_verify_policy(struct cpufreq_policy *policy)
-{
-	struct cpufreq_frequency_table *pxa_freqs_table;
-	pxa_freqs_t *pxa_freqs;
-	int ret;
-
-	find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
-	ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
-
-	if (freq_debug)
-		pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
-			 policy->min, policy->max);
-
-	return ret;
-}
-
-static unsigned int pxa_cpufreq_get(unsigned int cpu)
-{
-	return get_clk_frequency_khz(0);
-}
-
-static int pxa_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	struct cpufreq_frequency_table *pxa_freqs_table;
-	pxa_freqs_t *pxa_freq_settings;
-	struct cpufreq_freqs freqs;
-	unsigned int idx;
-	unsigned long flags;
-	unsigned int new_freq_cpu, new_freq_mem;
-	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
-
-	/* Get the current policy */
-	find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
-
-	/* Lookup the next frequency */
-	if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
-					   target_freq, relation, &idx)) {
-		return -EINVAL;
-	}
-
-	new_freq_cpu = pxa_freq_settings[idx].khz;
-	new_freq_mem = pxa_freq_settings[idx].membus;
-	freqs.old = policy->cur;
-	freqs.new = new_freq_cpu;
-	freqs.cpu = policy->cpu;
-
-	if (freq_debug)
-		pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
-			 "(SDRAM %d Mhz)\n",
-			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
-			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
-
-	/*
-	 * Tell everyone what we're about to do...
-	 * you should add a notify client with any platform specific
-	 * Vcc changing capability
-	 */
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
-	 * we need to preset the smaller DRI before the change.	 If we're
-	 * speeding up we need to set the larger DRI value after the change.
-	 */
-	preset_mdrefr = postset_mdrefr = MDREFR;
-	if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
-		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
-		preset_mdrefr |= mdrefr_dri(new_freq_mem);
-	}
-	postset_mdrefr =
-		(postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
-
-	/* If we're dividing the memory clock by two for the SDRAM clock, this
-	 * must be set prior to the change.  Clearing the divide must be done
-	 * after the change.
-	 */
-	if (pxa_freq_settings[idx].div2) {
-		preset_mdrefr  |= MDREFR_DB2_MASK;
-		postset_mdrefr |= MDREFR_DB2_MASK;
-	} else {
-		postset_mdrefr &= ~MDREFR_DB2_MASK;
-	}
-
-	local_irq_save(flags);
-
-	/* Set new the CCCR and prepare CCLKCFG */
-	CCCR = pxa_freq_settings[idx].cccr;
-	cclkcfg = pxa_freq_settings[idx].cclkcfg;
-
-	asm volatile("							\n\
-		ldr	r4, [%1]		/* load MDREFR */	\n\
-		b	2f						\n\
-		.align	5						\n\
-1:									\n\
-		str	%3, [%1]		/* preset the MDREFR */	\n\
-		mcr	p14, 0, %2, c6, c0, 0	/* set CCLKCFG[FCS] */	\n\
-		str	%4, [%1]		/* postset the MDREFR */ \n\
-									\n\
-		b	3f						\n\
-2:		b	1b						\n\
-3:		nop							\n\
-	  "
-		     : "=&r" (unused)
-		     : "r" (&MDREFR), "r" (cclkcfg),
-		       "r" (preset_mdrefr), "r" (postset_mdrefr)
-		     : "r4", "r5");
-	local_irq_restore(flags);
-
-	/*
-	 * Tell everyone what we've just done...
-	 * you should add a notify client with any platform specific
-	 * SDRAM refresh timer adjustments
-	 */
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int i;
-	unsigned int freq;
-
-	/* try to guess pxa27x cpu */
-	if (cpu_is_pxa27x())
-		pxa27x_guess_max_freq();
-
-	/* set default policy and cpuinfo */
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-	if (cpu_is_pxa25x())
-		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
-	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->cur = get_clk_frequency_khz(0);	   /* current freq */
-	policy->min = policy->max = policy->cur;
-
-	/* Generate pxa25x the run cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
-		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
-		pxa255_run_freq_table[i].index = i;
-	}
-	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	/* Generate pxa25x the turbo cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
-		pxa255_turbo_freq_table[i].frequency =
-			pxa255_turbo_freqs[i].khz;
-		pxa255_turbo_freq_table[i].index = i;
-	}
-	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	/* Generate the pxa27x cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA27x_FREQS; i++) {
-		freq = pxa27x_freqs[i].khz;
-		if (freq > pxa27x_maxfreq)
-			break;
-		pxa27x_freq_table[i].frequency = freq;
-		pxa27x_freq_table[i].index = i;
-	}
-	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	/*
-	 * Set the policy's minimum and maximum frequencies from the tables
-	 * just constructed.  This sets cpuinfo.mxx_freq, min and max.
-	 */
-	if (cpu_is_pxa25x())
-		cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
-	else if (cpu_is_pxa27x())
-		cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
-
-	printk(KERN_INFO "PXA CPU frequency change support initialized\n");
-
-	return 0;
-}
-
-static struct cpufreq_driver pxa_cpufreq_driver = {
-	.verify	= pxa_verify_policy,
-	.target	= pxa_set_target,
-	.init	= pxa_cpufreq_init,
-	.get	= pxa_cpufreq_get,
-	.name	= "PXA2xx",
-};
-
-static int __init pxa_cpu_init(void)
-{
-	int ret = -ENODEV;
-	if (cpu_is_pxa25x() || cpu_is_pxa27x())
-		ret = cpufreq_register_driver(&pxa_cpufreq_driver);
-	return ret;
-}
-
-static void __exit pxa_cpu_exit(void)
-{
-	cpufreq_unregister_driver(&pxa_cpufreq_driver);
-}
-
-
-MODULE_AUTHOR("Intrinsyc Software Inc.");
-MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
-MODULE_LICENSE("GPL");
-module_init(pxa_cpu_init);
-module_exit(pxa_cpu_exit);
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
new file mode 100644
index 0000000..1f272ea
--- /dev/null
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -0,0 +1,407 @@
+/*
+ *  linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+ *
+ *  Copyright (C) 2002,2003 Intrinsyc Software
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * History:
+ *   31-Jul-2002 : Initial version [FB]
+ *   29-Jan-2003 : added PXA255 support [FB]
+ *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
+ *
+ * Note:
+ *   This driver may change the memory bus clock rate, but will not do any
+ *   platform specific access timing changes... for example if you have flash
+ *   memory connected to CS0, you will need to register a platform specific
+ *   notifier which will adjust the memory access strobes to maintain a
+ *   minimum strobe width.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+
+#ifdef DEBUG
+static unsigned int freq_debug;
+module_param(freq_debug, uint, 0);
+MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
+#else
+#define freq_debug  0
+#endif
+
+static unsigned int pxa27x_maxfreq;
+module_param(pxa27x_maxfreq, uint, 0);
+MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
+		 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
+
+typedef struct {
+	unsigned int khz;
+	unsigned int membus;
+	unsigned int cccr;
+	unsigned int div2;
+	unsigned int cclkcfg;
+} pxa_freqs_t;
+
+/* Define the refresh period in mSec for the SDRAM and the number of rows */
+#define SDRAM_TREF	64	/* standard 64ms SDRAM */
+#define SDRAM_ROWS	4096	/* 64MB=8192 32MB=4096 */
+
+#define CCLKCFG_TURBO		0x1
+#define CCLKCFG_FCS		0x2
+#define CCLKCFG_HALFTURBO	0x4
+#define CCLKCFG_FASTBUS		0x8
+#define MDREFR_DB2_MASK		(MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK		0xFFF
+
+/*
+ * PXA255 definitions
+ */
+/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
+#define CCLKCFG			CCLKCFG_TURBO | CCLKCFG_FCS
+
+static pxa_freqs_t pxa255_run_freqs[] =
+{
+	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
+	{ 99500,  99500, 0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
+	{132700, 132700, 0x123, 1,  CCLKCFG},	/* 133,  133,   66,   66  */
+	{199100,  99500, 0x141, 0,  CCLKCFG},	/* 199,  199,   99,   99  */
+	{265400, 132700, 0x143, 1,  CCLKCFG},	/* 265,  265,  133,   66  */
+	{331800, 165900, 0x145, 1,  CCLKCFG},	/* 331,  331,  166,   83  */
+	{398100,  99500, 0x161, 0,  CCLKCFG},	/* 398,  398,  196,   99  */
+};
+
+/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
+static pxa_freqs_t pxa255_turbo_freqs[] =
+{
+	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
+	{ 99500, 99500,  0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
+	{199100, 99500,  0x221, 0,  CCLKCFG},	/*  99,  199,   50,   99  */
+	{298500, 99500,  0x321, 0,  CCLKCFG},	/*  99,  287,   50,   99  */
+	{298600, 99500,  0x1c1, 0,  CCLKCFG},	/* 199,  287,   99,   99  */
+	{398100, 99500,  0x241, 0,  CCLKCFG},	/* 199,  398,   99,   99  */
+};
+
+#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
+#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
+
+static struct cpufreq_frequency_table
+	pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
+static struct cpufreq_frequency_table
+	pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
+
+/*
+ * PXA270 definitions
+ *
+ * For the PXA27x:
+ * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
+ *
+ * A = 0 => memory controller clock from table 3-7,
+ * A = 1 => memory controller clock = system bus clock
+ * Run mode frequency	= 13 MHz * L
+ * Turbo mode frequency = 13 MHz * L * N
+ * System bus frequency = 13 MHz * L / (B + 1)
+ *
+ * In CCCR:
+ * A = 1
+ * L = 16	  oscillator to run mode ratio
+ * 2N = 6	  2 * (turbo mode to run mode ratio)
+ *
+ * In CCLKCFG:
+ * B = 1	  Fast bus mode
+ * HT = 0	  Half-Turbo mode
+ * T = 1	  Turbo mode
+ *
+ * For now, just support some of the combinations in table 3-7 of
+ * PXA27x Processor Family Developer's Manual to simplify frequency
+ * change sequences.
+ */
+#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
+#define CCLKCFG2(B, HT, T) \
+  (CCLKCFG_FCS | \
+   ((B)  ? CCLKCFG_FASTBUS : 0) | \
+   ((HT) ? CCLKCFG_HALFTURBO : 0) | \
+   ((T)  ? CCLKCFG_TURBO : 0))
+
+static pxa_freqs_t pxa27x_freqs[] = {
+	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1)},
+	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1)},
+	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
+	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
+	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
+	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
+	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
+};
+
+#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
+static struct cpufreq_frequency_table
+	pxa27x_freq_table[NUM_PXA27x_FREQS+1];
+
+extern unsigned get_clk_frequency_khz(int info);
+
+static void find_freq_tables(struct cpufreq_policy *policy,
+			     struct cpufreq_frequency_table **freq_table,
+			     pxa_freqs_t **pxa_freqs)
+{
+	if (cpu_is_pxa25x()) {
+		if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+			*pxa_freqs = pxa255_run_freqs;
+			*freq_table = pxa255_run_freq_table;
+		} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+			*pxa_freqs = pxa255_turbo_freqs;
+			*freq_table = pxa255_turbo_freq_table;
+		} else {
+			printk("CPU PXA: Unknown policy found. "
+			       "Using CPUFREQ_POLICY_PERFORMANCE\n");
+			*pxa_freqs = pxa255_run_freqs;
+			*freq_table = pxa255_run_freq_table;
+		}
+	}
+	if (cpu_is_pxa27x()) {
+		*pxa_freqs = pxa27x_freqs;
+		*freq_table = pxa27x_freq_table;
+	}
+}
+
+static void pxa27x_guess_max_freq(void)
+{
+	if (!pxa27x_maxfreq) {
+		pxa27x_maxfreq = 416000;
+		printk(KERN_INFO "PXA CPU 27x max frequency not defined "
+		       "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
+		       pxa27x_maxfreq);
+	} else {
+		pxa27x_maxfreq *= 1000;
+	}
+}
+
+static u32 mdrefr_dri(unsigned int freq)
+{
+	u32 dri = 0;
+
+	if (cpu_is_pxa25x())
+		dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
+	if (cpu_is_pxa27x())
+		dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
+	return dri;
+}
+
+/* find a valid frequency point */
+static int pxa_verify_policy(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *pxa_freqs_table;
+	pxa_freqs_t *pxa_freqs;
+	int ret;
+
+	find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
+	ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
+
+	if (freq_debug)
+		pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
+			 policy->min, policy->max);
+
+	return ret;
+}
+
+static unsigned int pxa_cpufreq_get(unsigned int cpu)
+{
+	return get_clk_frequency_khz(0);
+}
+
+static int pxa_set_target(struct cpufreq_policy *policy,
+			  unsigned int target_freq,
+			  unsigned int relation)
+{
+	struct cpufreq_frequency_table *pxa_freqs_table;
+	pxa_freqs_t *pxa_freq_settings;
+	struct cpufreq_freqs freqs;
+	unsigned int idx;
+	unsigned long flags;
+	unsigned int new_freq_cpu, new_freq_mem;
+	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
+
+	/* Get the current policy */
+	find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
+
+	/* Lookup the next frequency */
+	if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
+					   target_freq, relation, &idx)) {
+		return -EINVAL;
+	}
+
+	new_freq_cpu = pxa_freq_settings[idx].khz;
+	new_freq_mem = pxa_freq_settings[idx].membus;
+	freqs.old = policy->cur;
+	freqs.new = new_freq_cpu;
+	freqs.cpu = policy->cpu;
+
+	if (freq_debug)
+		pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
+			 "(SDRAM %d Mhz)\n",
+			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
+			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
+
+	/*
+	 * Tell everyone what we're about to do...
+	 * you should add a notify client with any platform specific
+	 * Vcc changing capability
+	 */
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
+	 * we need to preset the smaller DRI before the change.	 If we're
+	 * speeding up we need to set the larger DRI value after the change.
+	 */
+	preset_mdrefr = postset_mdrefr = MDREFR;
+	if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
+		preset_mdrefr |= mdrefr_dri(new_freq_mem);
+	}
+	postset_mdrefr =
+		(postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
+
+	/* If we're dividing the memory clock by two for the SDRAM clock, this
+	 * must be set prior to the change.  Clearing the divide must be done
+	 * after the change.
+	 */
+	if (pxa_freq_settings[idx].div2) {
+		preset_mdrefr  |= MDREFR_DB2_MASK;
+		postset_mdrefr |= MDREFR_DB2_MASK;
+	} else {
+		postset_mdrefr &= ~MDREFR_DB2_MASK;
+	}
+
+	local_irq_save(flags);
+
+	/* Set new the CCCR and prepare CCLKCFG */
+	CCCR = pxa_freq_settings[idx].cccr;
+	cclkcfg = pxa_freq_settings[idx].cclkcfg;
+
+	asm volatile("							\n\
+		ldr	r4, [%1]		/* load MDREFR */	\n\
+		b	2f						\n\
+		.align	5						\n\
+1:									\n\
+		str	%3, [%1]		/* preset the MDREFR */	\n\
+		mcr	p14, 0, %2, c6, c0, 0	/* set CCLKCFG[FCS] */	\n\
+		str	%4, [%1]		/* postset the MDREFR */ \n\
+									\n\
+		b	3f						\n\
+2:		b	1b						\n\
+3:		nop							\n\
+	  "
+		     : "=&r" (unused)
+		     : "r" (&MDREFR), "r" (cclkcfg),
+		       "r" (preset_mdrefr), "r" (postset_mdrefr)
+		     : "r4", "r5");
+	local_irq_restore(flags);
+
+	/*
+	 * Tell everyone what we've just done...
+	 * you should add a notify client with any platform specific
+	 * SDRAM refresh timer adjustments
+	 */
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int i;
+	unsigned int freq;
+
+	/* try to guess pxa27x cpu */
+	if (cpu_is_pxa27x())
+		pxa27x_guess_max_freq();
+
+	/* set default policy and cpuinfo */
+	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+	policy->cur = get_clk_frequency_khz(0);	   /* current freq */
+	policy->min = policy->max = policy->cur;
+
+	/* Generate pxa25x the run cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
+		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
+		pxa255_run_freq_table[i].index = i;
+	}
+	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	/* Generate pxa25x the turbo cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
+		pxa255_turbo_freq_table[i].frequency =
+			pxa255_turbo_freqs[i].khz;
+		pxa255_turbo_freq_table[i].index = i;
+	}
+	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	/* Generate the pxa27x cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_PXA27x_FREQS; i++) {
+		freq = pxa27x_freqs[i].khz;
+		if (freq > pxa27x_maxfreq)
+			break;
+		pxa27x_freq_table[i].frequency = freq;
+		pxa27x_freq_table[i].index = i;
+	}
+	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	/*
+	 * Set the policy's minimum and maximum frequencies from the tables
+	 * just constructed.  This sets cpuinfo.mxx_freq, min and max.
+	 */
+	if (cpu_is_pxa25x())
+		cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
+	else if (cpu_is_pxa27x())
+		cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
+
+	printk(KERN_INFO "PXA CPU frequency change support initialized\n");
+
+	return 0;
+}
+
+static struct cpufreq_driver pxa_cpufreq_driver = {
+	.verify	= pxa_verify_policy,
+	.target	= pxa_set_target,
+	.init	= pxa_cpufreq_init,
+	.get	= pxa_cpufreq_get,
+	.name	= "PXA2xx",
+};
+
+static int __init pxa_cpu_init(void)
+{
+	int ret = -ENODEV;
+	if (cpu_is_pxa25x() || cpu_is_pxa27x())
+		ret = cpufreq_register_driver(&pxa_cpufreq_driver);
+	return ret;
+}
+
+static void __exit pxa_cpu_exit(void)
+{
+	cpufreq_unregister_driver(&pxa_cpufreq_driver);
+}
+
+
+MODULE_AUTHOR("Intrinsyc Software Inc.");
+MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
+MODULE_LICENSE("GPL");
+module_init(pxa_cpu_init);
+module_exit(pxa_cpu_exit);
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
new file mode 100644
index 0000000..968c830
--- /dev/null
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -0,0 +1,257 @@
+/*
+ * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "generic.h"
+
+#define HSS_104M	(0)
+#define HSS_156M	(1)
+#define HSS_208M	(2)
+#define HSS_312M	(3)
+
+#define SMCFS_78M	(0)
+#define SMCFS_104M	(2)
+#define SMCFS_208M	(5)
+
+#define SFLFS_104M	(0)
+#define SFLFS_156M	(1)
+#define SFLFS_208M	(2)
+#define SFLFS_312M	(3)
+
+#define XSPCLK_156M	(0)
+#define XSPCLK_NONE	(3)
+
+#define DMCFS_26M	(0)
+#define DMCFS_260M	(3)
+
+struct pxa3xx_freq_info {
+	unsigned int cpufreq_mhz;
+	unsigned int core_xl : 5;
+	unsigned int core_xn : 3;
+	unsigned int hss : 2;
+	unsigned int dmcfs : 2;
+	unsigned int smcfs : 3;
+	unsigned int sflfs : 2;
+	unsigned int df_clkdiv : 3;
+
+	int	vcc_core;	/* in mV */
+	int	vcc_sram;	/* in mV */
+};
+
+#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \
+{									\
+	.cpufreq_mhz	= cpufreq,					\
+	.core_xl	= _xl,						\
+	.core_xn	= _xn,						\
+	.hss		= HSS_##_hss##M,				\
+	.dmcfs		= DMCFS_##_dmc##M,				\
+	.smcfs		= SMCFS_##_smc##M,				\
+	.sflfs		= SFLFS_##_sfl##M,				\
+	.df_clkdiv	= _dfi,						\
+	.vcc_core	= vcore,					\
+	.vcc_sram	= vsram,					\
+}
+
+static struct pxa3xx_freq_info pxa300_freqs[] = {
+	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
+	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+};
+
+static struct pxa3xx_freq_info pxa320_freqs[] = {
+	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
+	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+	OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */
+};
+
+static unsigned int pxa3xx_freqs_num;
+static struct pxa3xx_freq_info *pxa3xx_freqs;
+static struct cpufreq_frequency_table *pxa3xx_freqs_table;
+
+static int setup_freqs_table(struct cpufreq_policy *policy,
+			     struct pxa3xx_freq_info *freqs, int num)
+{
+	struct cpufreq_frequency_table *table;
+	int i;
+
+	table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL);
+	if (table == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < num; i++) {
+		table[i].index = i;
+		table[i].frequency = freqs[i].cpufreq_mhz * 1000;
+	}
+	table[num].frequency = i;
+	table[num].frequency = CPUFREQ_TABLE_END;
+
+	pxa3xx_freqs = freqs;
+	pxa3xx_freqs_num = num;
+	pxa3xx_freqs_table = table;
+
+	return cpufreq_frequency_table_cpuinfo(policy, table);
+}
+
+static void __update_core_freq(struct pxa3xx_freq_info *info)
+{
+	uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK;
+	uint32_t accr = ACCR;
+	uint32_t xclkcfg;
+
+	accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK);
+	accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
+
+	/* No clock until core PLL is re-locked */
+	accr |= ACCR_XSPCLK(XSPCLK_NONE);
+
+	xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2;	/* turbo bit */
+
+	ACCR = accr;
+	__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
+
+	while ((ACSR & mask) != (accr & mask))
+		cpu_relax();
+}
+
+static void __update_bus_freq(struct pxa3xx_freq_info *info)
+{
+	uint32_t mask;
+	uint32_t accr = ACCR;
+
+	mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
+		ACCR_DMCFS_MASK;
+
+	accr &= ~mask;
+	accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
+		ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
+
+	ACCR = accr;
+
+	while ((ACSR & mask) != (accr & mask))
+		cpu_relax();
+}
+
+static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table);
+}
+
+static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
+{
+	return get_clk_frequency_khz(0);
+}
+
+static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct pxa3xx_freq_info *next;
+	struct cpufreq_freqs freqs;
+	unsigned long flags;
+	int idx;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	/* Lookup the next frequency */
+	if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table,
+				target_freq, relation, &idx))
+		return -EINVAL;
+
+	next = &pxa3xx_freqs[idx];
+
+	freqs.old = policy->cur;
+	freqs.new = next->cpufreq_mhz * 1000;
+	freqs.cpu = policy->cpu;
+
+	pr_debug("CPU frequency from %d MHz to %d MHz%s\n",
+			freqs.old / 1000, freqs.new / 1000,
+			(freqs.old == freqs.new) ? " (skipped)" : "");
+
+	if (freqs.old == target_freq)
+		return 0;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	local_irq_save(flags);
+	__update_core_freq(next);
+	__update_bus_freq(next);
+	local_irq_restore(flags);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int ret = -EINVAL;
+
+	/* set default policy and cpuinfo */
+	policy->cpuinfo.min_freq = 104000;
+	policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
+	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+	policy->cur = policy->min = policy->max = get_clk_frequency_khz(0);
+
+	if (cpu_is_pxa300() || cpu_is_pxa310())
+		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
+
+	if (cpu_is_pxa320())
+		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs));
+
+	if (ret) {
+		pr_err("failed to setup frequency table\n");
+		return ret;
+	}
+
+	pr_info("CPUFREQ support for PXA3xx initialized\n");
+	return 0;
+}
+
+static struct cpufreq_driver pxa3xx_cpufreq_driver = {
+	.verify		= pxa3xx_cpufreq_verify,
+	.target		= pxa3xx_cpufreq_set,
+	.init		= pxa3xx_cpufreq_init,
+	.get		= pxa3xx_cpufreq_get,
+	.name		= "pxa3xx-cpufreq",
+};
+
+static int __init cpufreq_init(void)
+{
+	if (cpu_is_pxa3xx())
+		return cpufreq_register_driver(&pxa3xx_cpufreq_driver);
+
+	return 0;
+}
+module_init(cpufreq_init);
+
+static void __exit cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&pxa3xx_cpufreq_driver);
+}
+module_exit(cpufreq_exit);
+
+MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 887c738..bb04af4 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -32,5 +32,6 @@ extern struct platform_device pxa27x_device_pwm0;
 extern struct platform_device pxa27x_device_pwm1;
 
 extern struct platform_device pxa3xx_device_nand;
+extern struct platform_device pxa3xx_device_i2c_power;
 
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
new file mode 100644
index 0000000..d488ede
--- /dev/null
+++ b/arch/arm/mach-pxa/e330.c
@@ -0,0 +1,43 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+static void __init e330_init(void)
+{
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e330_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
new file mode 100644
index 0000000..8ecbc54
--- /dev/null
+++ b/arch/arm/mach-pxa/e350.c
@@ -0,0 +1,43 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+static void __init e350_init(void)
+{
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e350_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
new file mode 100644
index 0000000..544bbaa
--- /dev/null
+++ b/arch/arm/mach-pxa/e400.c
@@ -0,0 +1,94 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
+#include <mach/pxafb.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
deleted file mode 100644
index 2638841..0000000
--- a/arch/arm/mach-pxa/e400_lcd.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * e400_lcd.c
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxafb.h>
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-static int __init e400_lcd_init(void)
-{
-	if (!machine_is_e400())
-		return -ENODEV;
-
-	set_pxa_fb_info(&e400_pxafb_mach_info);
-	return 0;
-}
-
-module_init(e400_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e400 lcd driver");
-MODULE_LICENSE("GPLv2");
-
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
new file mode 100644
index 0000000..c57a15b
--- /dev/null
+++ b/arch/arm/mach-pxa/e740.c
@@ -0,0 +1,169 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e740_fb_device,
+};
+
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
deleted file mode 100644
index 26bd599..0000000
--- a/arch/arm/mach-pxa/e740_lcd.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* e740_lcd.c
- *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <video/w100fb.h>
-
-/*
-**potential** shutdown routine - to be investigated
-devmem2 0x0c010528 w 0xff3fff00
-devmem2 0x0c010190 w 0x7FFF8000
-devmem2 0x0c0101b0 w 0x00FF0000
-devmem2 0x0c01008c w 0x00000000
-devmem2 0x0c010080 w 0x000000bf
-devmem2 0x0c010098 w 0x00000015
-devmem2 0x0c010088 w 0x4b000204
-devmem2 0x0c010098 w 0x0000001d
-*/
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-/* ----------------------- device declarations -------------------------- */
-
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-static int e740_lcd_init(void)
-{
-	int ret;
-
-	if (!machine_is_e740())
-		return -ENODEV;
-
-	return platform_device_register(&e740_fb_device);
-}
-
-module_init(e740_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e740 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
new file mode 100644
index 0000000..640e738
--- /dev/null
+++ b/arch/arm/mach-pxa/e750.c
@@ -0,0 +1,126 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e750_fb_device,
+};
+
+static void __init e750_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e750_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750_lcd.c
deleted file mode 100644
index 75edc3b..0000000
--- a/arch/arm/mach-pxa/e750_lcd.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/* e750_lcd.c
- *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <video/w100fb.h>
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-/* ----------------------- device declarations -------------------------- */
-
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-static int e750_lcd_init(void)
-{
-	if (!machine_is_e750())
-		return -ENODEV;
-
-	return platform_device_register(&e750_fb_device);
-}
-
-module_init(e750_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e750 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
new file mode 100644
index 0000000..a293e09
--- /dev/null
+++ b/arch/arm/mach-pxa/e800.c
@@ -0,0 +1,186 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
+		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e800_fb_device,
+};
+
+static void __init e800_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_udc_info(&e800_udc_mach_info);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e800_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800_lcd.c
deleted file mode 100644
index e6aeab0..0000000
--- a/arch/arm/mach-pxa/e800_lcd.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/* e800_lcd.c
- *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <video/w100fb.h>
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
-		.pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-/* ----------------------- device declarations -------------------------- */
-
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-static int e800_lcd_init(void)
-{
-	if (!machine_is_e800())
-		return -ENODEV;
-
-	return platform_device_register(&e800_fb_device);
-}
-
-module_init(e800_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e800 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 7a0a681..f5ed803 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -373,10 +373,6 @@ static inline void em_x270_init_nand(void) {}
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
-	/* Set the Power Control Polarity Low */
-	UHCHR = (UHCHR | UHCHR_PCPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
 	/* enable port 2 transiever */
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
 
@@ -385,6 +381,7 @@ static int em_x270_ohci_init(struct device *dev)
 
 static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 	.init		= em_x270_ohci_init,
 };
 
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 001a252..d28849b 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -19,68 +19,13 @@
 
 #include <mach/mfp-pxa25x.h>
 #include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
 
 #include "generic.h"
 
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
 /* Only e800 has 128MB RAM */
-static void __init eseries_fixup(struct machine_desc *desc,
+void __init eseries_fixup(struct machine_desc *desc,
 	struct tag *tags, char **cmdline, struct meminfo *mi)
 {
 	mi->nr_banks=1;
@@ -92,95 +37,9 @@ static void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-}
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-}
-
-/* e-series machine definitions */
-
-#ifdef CONFIG_MACH_E330
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
+struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+	.gpio_vbus   = GPIO_E7XX_USB_DISC,
+	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
 
diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h
new file mode 100644
index 0000000..a83f88d
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries.h
@@ -0,0 +1,4 @@
+void __init eseries_fixup(struct machine_desc *desc,
+	struct tag *tags, char **cmdline, struct meminfo *mi);
+
+extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
deleted file mode 100644
index d622c04..0000000
--- a/arch/arm/mach-pxa/eseries_udc.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * UDC functions for the Toshiba e-series PDAs
- *
- * Copyright (c) Ian Molton 2003
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <mach/udc.h>
-#include <mach/eseries-gpio.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/domain.h>
-
-/* local PXA generic code */
-#include "generic.h"
-
-static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
-	.gpio_vbus   = GPIO_E7XX_USB_DISC,
-	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
-	.gpio_vbus   = GPIO_E800_USB_DISC,
-	.gpio_pullup = GPIO_E800_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-static int __init eseries_udc_init(void)
-{
-	if (machine_is_e330() || machine_is_e350() ||
-	    machine_is_e740() || machine_is_e750() ||
-	    machine_is_e400())
-		pxa_set_udc_info(&e7xx_udc_mach_info);
-	else if (machine_is_e800())
-		pxa_set_udc_info(&e800_udc_mach_info);
-
-	return 0;
-}
-
-module_init(eseries_udc_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("eseries UDC support");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ceaed00..85ed0b3 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -46,7 +46,7 @@ void clear_reset_status(unsigned int mask)
  */
 unsigned int get_clk_frequency_khz(int info)
 {
-	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+	if (cpu_is_pxa25x())
 		return pxa25x_get_clk_frequency_khz(info);
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_clk_frequency_khz(info);
@@ -60,7 +60,7 @@ EXPORT_SYMBOL(get_clk_frequency_khz);
  */
 unsigned int get_memclk_frequency_10khz(void)
 {
-	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+	if (cpu_is_pxa25x())
 		return pxa25x_get_memclk_frequency_10khz();
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_memclk_frequency_10khz();
@@ -88,11 +88,6 @@ static struct map_desc standard_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(0x48000000),
 		.length		= 0x00200000,
 		.type		= MT_DEVICE
-	}, {	/* USB host */
-		.virtual	=  0xf8000000,
-		.pfn		= __phys_to_pfn(0x4c000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
 	}, {	/* Camera */
 		.virtual	=  0xfa000000,
 		.pfn		= __phys_to_pfn(0x50000000),
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 041c048..dc876a8 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -65,4 +65,5 @@ static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 
 extern struct sysdev_class pxa_irq_sysclass;
 extern struct sysdev_class pxa_gpio_sysclass;
+extern struct sysdev_class pxa2xx_mfp_sysclass;
 extern struct sysdev_class pxa3xx_mfp_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 07acc1b..14930cf 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -16,10 +16,10 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <asm/gpio.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 
@@ -275,7 +275,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
 			loop = 1;
 
 			n = PXA_GPIO_IRQ_BASE + bit;
-			desc_handle_irq(n, irq_desc + n);
+			generic_handle_irq(n);
 
 			bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
 		}
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index c009247..d8962a0 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -20,8 +20,12 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -40,7 +44,7 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
 
 #include "generic.h"
 
@@ -85,21 +89,8 @@ static struct platform_device *devices[] __initdata = {
 };
 
 #ifdef CONFIG_MMC_PXA
-static struct pxamci_platform_data gumstix_mci_platform_data;
-
-static int gumstix_mci_init(struct device *dev, irq_handler_t detect_int,
-				void *data)
-{
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO53_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
-	return 0;
-}
-
 static struct pxamci_platform_data gumstix_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init		= gumstix_mci_init,
 };
 
 static void __init gumstix_mmc_init(void)
@@ -109,11 +100,11 @@ static void __init gumstix_mmc_init(void)
 #else
 static void __init gumstix_mmc_init(void)
 {
-	printk(KERN_INFO "Gumstix mmc disabled\n");
+	pr_debug("Gumstix mmc disabled\n");
 }
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA2XX
+#ifdef CONFIG_USB_GADGET_PXA25X
 static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
@@ -126,12 +117,87 @@ static void __init gumstix_udc_init(void)
 #else
 static void gumstix_udc_init(void)
 {
-	printk(KERN_INFO "Gumstix udc is disabled\n");
+	pr_debug("Gumstix udc is disabled\n");
 }
 #endif
 
+#ifdef CONFIG_BT
+/* Normally, the bootloader would have enabled this 32kHz clock but many
+** boards still have u-boot 1.1.4 so we check if it has been turned on and
+** if not, we turn it on with a warning message. */
+static void gumstix_setup_bt_clock(void)
+{
+	int timeout = 500;
+
+	if (!(OSCC & OSCC_OOK))
+		pr_warning("32kHz clock was not on. Bootloader may need to "
+				"be updated\n");
+	else
+		return;
+
+	OSCC |= OSCC_OON;
+	do {
+		if (OSCC & OSCC_OOK)
+			break;
+		udelay(1);
+	} while (--timeout);
+	if (!timeout)
+		pr_err("Failed to start 32kHz clock\n");
+}
+
+static void __init gumstix_bluetooth_init(void)
+{
+	int err;
+
+	gumstix_setup_bt_clock();
+
+	err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
+	if (err) {
+		pr_err("gumstix: failed request gpio for bluetooth reset\n");
+		return;
+	}
+
+	err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
+	if (err) {
+		pr_err("gumstix: can't reset bluetooth\n");
+		return;
+	}
+	gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
+	udelay(100);
+	gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
+}
+#else
+static void gumstix_bluetooth_init(void)
+{
+	pr_debug("Gumstix Bluetooth is disabled\n");
+}
+#endif
+
+static unsigned long gumstix_pin_config[] __initdata = {
+	GPIO12_32KHz,
+	/* BTUART */
+	GPIO42_HWUART_RXD,
+	GPIO43_HWUART_TXD,
+	GPIO44_HWUART_CTS,
+	GPIO45_HWUART_RTS,
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO53_MMC_CLK,
+	GPIO8_MMC_CS0,
+	/* these are used by AM200EPD */
+	GPIO51_GPIO,
+	GPIO49_GPIO,
+	GPIO48_GPIO,
+	GPIO32_GPIO,
+	GPIO17_GPIO,
+	GPIO16_GPIO,
+};
+
 static void __init gumstix_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
+
+	gumstix_bluetooth_init();
 	gumstix_udc_init();
 	gumstix_mmc_init();
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 5aa0270..013b15b 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
 #include <mach/idp.h>
 #include <mach/pxafb.h>
 #include <mach/bitfield.h>
@@ -46,6 +46,47 @@
  * - Ethernet interrupt
  */
 
+static unsigned long idp_pin_config[] __initdata = {
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* Ethernet */
+	GPIO33_nCS_5,	/* Ethernet CS */
+	GPIO4_GPIO,	/* Ethernet IRQ */
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= (IDP_ETH_PHYS + 0x300),
@@ -121,44 +162,28 @@ static struct pxafb_mach_info sharp_lm8v31 = {
 	.num_modes      = 1,
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
-	.lccr0		= LCCR0_SDS,
-	.lccr3		= LCCR3_PCP | LCCR3_Acb(255),
+	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
+			  LCD_AC_BIAS_FREQ(255),
 	.pxafb_backlight_power = &idp_backlight_power,
 	.pxafb_lcd_power = &idp_lcd_power
 };
 
-static int idp_mci_init(struct device *dev, irq_handler_t idp_detect_int, void *data)
-{
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
-	return 0;
-}
-
 static struct pxamci_platform_data idp_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= idp_mci_init,
 };
 
 static void __init idp_init(void)
 {
 	printk("idp_init()\n");
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&idp_mci_platform_data);
 }
 
-static void __init idp_init_irq(void)
-{
-
-	pxa25x_init_irq();
-
-	set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE);
-}
-
 static struct map_desc idp_io_desc[] __initdata = {
   	{
 		.virtual	=  IDP_COREVOLT_VIRT,
@@ -177,15 +202,6 @@ static void __init idp_map_io(void)
 {
 	pxa_map_io();
 	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
-
-	// serial ports 2 & 3
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
-
 }
 
 
@@ -194,7 +210,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= idp_map_io,
-	.init_irq	= idp_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= idp_init,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
deleted file mode 100644
index 5d8cc1d..0000000
--- a/arch/arm/mach-pxa/include/mach/akita.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Hardware specific definitions for SL-C1000 (Akita)
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/* Akita IO Expander GPIOs */
-
-#define AKITA_IOEXP_RESERVED_7      (1 << 7)
-#define AKITA_IOEXP_IR_ON           (1 << 6)
-#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
-#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
-#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
-#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
-#define AKITA_IOEXP_RESERVED_1      (1 << 1)
-#define AKITA_IOEXP_RESERVED_0      (1 << 0)
-
-/* Direction Bitfield  0=output  1=input */
-#define AKITA_IOEXP_IO_DIR	0
-/* Default Values */
-#define AKITA_IOEXP_IO_OUT	(AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP)
-
-extern struct platform_device akitaioexp_device;
-
-void akita_set_ioexp(struct device *dev, unsigned char bitmask);
-void akita_reset_ioexp(struct device *dev, unsigned char bitmask);
-
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
index 39516ce..31abe6d 100644
--- a/arch/arm/mach-pxa/include/mach/camera.h
+++ b/arch/arm/mach-pxa/include/mach/camera.h
@@ -36,8 +36,6 @@
 
 struct pxacamera_platform_data {
 	int (*init)(struct device *);
-	int (*power)(struct device *, int);
-	int (*reset)(struct device *, int);
 
 	unsigned long flags;
 	unsigned long mclk_10khz;
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index bf85650..7239281 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -98,6 +98,16 @@
 			CORGI_SCP_MIC_BIAS )
 #define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
 
+#define CORGI_SCOOP_GPIO_BASE		(NR_BUILTIN_GPIO)
+#define CORGI_GPIO_LED_GREEN		(CORGI_SCOOP_GPIO_BASE + 0)
+#define CORGI_GPIO_SWA			(CORGI_SCOOP_GPIO_BASE + 1)  /* Hinge Switch A */
+#define CORGI_GPIO_SWB			(CORGI_SCOOP_GPIO_BASE + 2)  /* Hinge Switch B */
+#define CORGI_GPIO_MUTE_L		(CORGI_SCOOP_GPIO_BASE + 3)
+#define CORGI_GPIO_MUTE_R		(CORGI_SCOOP_GPIO_BASE + 4)
+#define CORGI_GPIO_AKIN_PULLUP		(CORGI_SCOOP_GPIO_BASE + 5)
+#define CORGI_GPIO_APM_ON		(CORGI_SCOOP_GPIO_BASE + 6)
+#define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
+#define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
 
 /*
  * Shared data structures
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index de16c12..f6b4bf3 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -41,7 +41,7 @@
 		and	\irqstat, \irqstat, \irqnr
 		clz	\irqnr, \irqstat
 		rsb	\irqnr, \irqnr, #31
-		add	\irqnr, \irqnr, #32
+		add	\irqnr, \irqnr, #(32 + PXA_IRQ(0))
 		b	1001f
 1003:
 		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
@@ -52,6 +52,6 @@
 		rsb	\irqstat, \irqnr, #0
 		and	\irqstat, \irqstat, \irqnr
 		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
+		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
 1001:
 		.endm
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index e89df4d..a582a6d 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -62,26 +62,74 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/cputype.h>
+
+/*
+ *   CPU     Stepping     CPU_ID         JTAG_ID
+ *
+ *  PXA210	B0	0x69052922	0x2926C013
+ *  PXA210	B1	0x69052923	0x3926C013
+ *  PXA210	B2	0x69052924	0x4926C013
+ *  PXA210	C0	0x69052D25	0x5926C013
+ *
+ *  PXA250	A0	0x69052100	0x09264013
+ *  PXA250	A1	0x69052101	0x19264013
+ *  PXA250	B0	0x69052902	0x29264013
+ *  PXA250	B1	0x69052903	0x39264013
+ *  PXA250	B2	0x69052904	0x49264013
+ *  PXA250	C0	0x69052D05	0x59264013
+ *
+ *  PXA255	A0	0x69052D06	0x69264013
+ *
+ *  PXA26x	A0	0x69052903	0x39264013
+ *  PXA26x	B0	0x69052D05	0x59264013
+ *
+ *  PXA27x	A0	0x69054110	0x09265013
+ *  PXA27x	A1	0x69054111	0x19265013
+ *  PXA27x	B0	0x69054112	0x29265013
+ *  PXA27x	B1	0x69054113	0x39265013
+ *  PXA27x	C0	0x69054114	0x49265013
+ *  PXA27x	C5	0x69054117	0x79265013
+ *
+ *  PXA30x	A0	0x69056880	0x0E648013
+ *  PXA30x	A1	0x69056881	0x1E648013
+ *  PXA31x	A0	0x69056890	0x0E649013
+ *  PXA31x	A1	0x69056891	0x1E649013
+ *  PXA31x	A2	0x69056892	0x2E649013
+ *  PXA32x	B1	0x69056825	0x5E642013
+ *  PXA32x	B2	0x69056826	0x6E642013
+ *
+ *  PXA930	B0	0x69056835	0x5E643013
+ *  PXA930	B1	0x69056837	0x7E643013
+ *  PXA930	B2	0x69056838	0x8E643013
+ */
 #ifdef CONFIG_PXA25x
-#define __cpu_is_pxa21x(id)				\
+#define __cpu_is_pxa210(id)				\
 	({						\
-		unsigned int _id = (id) >> 4 & 0xf3f;	\
-		_id == 0x212;				\
+		unsigned int _id = (id) & 0xf3f0;	\
+		_id == 0x2120;				\
 	})
 
-#define __cpu_is_pxa255(id)                             \
-	({                                              \
-		unsigned int _id = (id) >> 4 & 0xfff;   \
-		_id == 0x2d0;                           \
-	 })
+#define __cpu_is_pxa250(id)				\
+	({						\
+		unsigned int _id = (id) & 0xf3ff;	\
+		_id <= 0x2105;				\
+	})
+
+#define __cpu_is_pxa255(id)				\
+	({						\
+		unsigned int _id = (id) & 0xffff;	\
+		_id == 0x2d06;				\
+	})
 
 #define __cpu_is_pxa25x(id)				\
 	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x2d0 || _id == 0x290;		\
+		unsigned int _id = (id) & 0xf300;	\
+		_id == 0x2100;				\
 	})
 #else
-#define __cpu_is_pxa21x(id)	(0)
+#define __cpu_is_pxa210(id)	(0)
+#define __cpu_is_pxa250(id)	(0)
 #define __cpu_is_pxa255(id)	(0)
 #define __cpu_is_pxa25x(id)	(0)
 #endif
@@ -136,9 +184,14 @@
 #define __cpu_is_pxa930(id)	(0)
 #endif
 
-#define cpu_is_pxa21x()					\
+#define cpu_is_pxa210()					\
 	({						\
-		__cpu_is_pxa21x(read_cpuid_id());	\
+		__cpu_is_pxa210(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa250()					\
+	({						\
+		__cpu_is_pxa250(read_cpuid_id());	\
 	})
 
 #define cpu_is_pxa255()                                 \
@@ -151,6 +204,8 @@
 		__cpu_is_pxa25x(read_cpuid_id());	\
 	})
 
+extern int cpu_is_pxa26x(void);
+
 #define cpu_is_pxa27x()					\
 	({						\
 		__cpu_is_pxa27x(read_cpuid_id());	\
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
index 80596b0..1a9f65e 100644
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
@@ -65,13 +65,18 @@ struct i2c_pxa_platform_data {
 	unsigned int		slave_addr;
 	struct i2c_slave_client	*slave;
 	unsigned int		class;
-	int			use_pio;
+	unsigned int		use_pio :1;
+	unsigned int		fast_mode :1;
 };
 
 extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
 
 #ifdef CONFIG_PXA27x
-extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#ifdef CONFIG_PXA3xx
+extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info);
 #endif
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 108b5db..32bb4a2 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -9,9 +9,17 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
 
+#ifdef CONFIG_PXA_HAVE_ISA_IRQS
+#define PXA_ISA_IRQ(x)	(x)
+#define PXA_ISA_IRQ_NUM	(16)
+#else
+#define PXA_ISA_IRQ_NUM	(0)
+#endif
 
-#define PXA_IRQ(x)	(x)
+#define PXA_IRQ(x)	(PXA_ISA_IRQ_NUM + (x))
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
@@ -73,7 +81,7 @@
 #define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
 #endif
 
-#define PXA_GPIO_IRQ_BASE	(64)
+#define PXA_GPIO_IRQ_BASE	PXA_IRQ(64)
 #define PXA_GPIO_IRQ_NUM	(128)
 
 #define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
@@ -178,13 +186,7 @@
 #define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
 #elif defined(CONFIG_SHARP_LOCOMO)
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
-#elif defined(CONFIG_ARCH_LUBBOCK) || \
-      defined(CONFIG_MACH_LOGICPD_PXA270) || \
-      defined(CONFIG_MACH_TOSA) || \
-      defined(CONFIG_MACH_MAINSTONE) || \
-      defined(CONFIG_MACH_PCM027) || \
-      defined(CONFIG_ARCH_PXA_ESERIES) || \
-      defined(CONFIG_MACH_MAGICIAN)
+#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
 #define NR_IRQS			(IRQ_BOARD_END)
 #elif defined(CONFIG_MACH_ZYLONITE)
 #define NR_IRQS			(IRQ_BOARD_START + 32)
@@ -263,3 +265,5 @@
 #endif
 
 #endif /* CONFIG_PCI_HOST_ITE8152 */
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 79d209b..5c4e320 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -3,4 +3,6 @@
 
 #define LITTLETON_ETH_PHYS	0x30000000
 
+#define LITTLETON_GPIO_LCD_CS	(17)
+
 #endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 552eb7f..59aef89 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -40,11 +40,11 @@
 #define NODE_MEM_SIZE_BITS	26
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx270_pci_adjust_zones(int node, unsigned long *size,
+void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
 			     unsigned long *holes);
 
 #define arch_adjust_zones(node, size, holes) \
-	cmx270_pci_adjust_zones(node, size, holes)
+	cmx2xx_pci_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 6c8e722..617cab2 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -17,7 +17,7 @@
 
 /* Crystal and Clock Signals */
 #define GPIO10_RTCCLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO70_RTC_CLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO70_RTCCLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
 #define GPIO7_48MHz		MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
 #define GPIO11_3_6MHz		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
 #define GPIO71_3_6MHz		MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
@@ -156,6 +156,6 @@
 #define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
 #define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
 #define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_ACBIAS	MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
 
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 7499051..67f8385 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -257,10 +257,10 @@
 #define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
 #define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
 
-#define GPIO69_SSP3_SCLK	MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
-#define GPIO70_SSP3_FRM		MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO89_SSP3_SCLK	MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
-#define GPIO90_SSP3_FRM		MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO69_SSP3_SCLK	MFP_CFG_X(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK	MFP_CFG_X(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM		MFP_CFG_X(GPIO90, AF1, DS08X, DRIVE_LOW)
 #define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
 #define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
 #define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index 8769567..4821850 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -274,12 +274,13 @@ typedef unsigned long mfp_cfg_t;
 #define MFP_DS_MASK		(0x7 << 13)
 #define MFP_DS(x)		(((x) >> 13) & 0x7)
 
-#define MFP_LPM_INPUT		(0x0 << 16)
+#define MFP_LPM_DEFAULT		(0x0 << 16)
 #define MFP_LPM_DRIVE_LOW	(0x1 << 16)
 #define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
 #define MFP_LPM_PULL_LOW	(0x3 << 16)
 #define MFP_LPM_PULL_HIGH	(0x4 << 16)
 #define MFP_LPM_FLOAT		(0x5 << 16)
+#define MFP_LPM_INPUT		(0x6 << 16)
 #define MFP_LPM_STATE_MASK	(0x7 << 16)
 #define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
 
@@ -297,7 +298,7 @@ typedef unsigned long mfp_cfg_t;
 #define MFP_PULL_MASK		(0x3 << 21)
 #define MFP_PULL(x)		(((x) >> 21) & 0x3)
 
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
+#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
 				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
 
 #define MFP_CFG(pin, af)		\
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
new file mode 100644
index 0000000..8483cb5
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -0,0 +1,67 @@
+#ifndef _MIOA701_H_
+#define _MIOA701_H_
+
+#define MIO_CFG_IN(pin, af)		\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
+
+#define MIO_CFG_OUT(pin, af, state)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Global GPIOs */
+#define GPIO9_CHARGE_nEN			9
+#define GPIO18_POWEROFF				18
+#define GPIO87_LCD_POWER			87
+
+/* USB */
+#define GPIO13_USB_DETECT			13
+#define GPIO22_USB_ENABLE			22
+
+/* SDIO bits */
+#define GPIO78_SDIO_RO				78
+#define GPIO15_SDIO_INSERT			15
+#define GPIO91_SDIO_EN				91
+
+/* Bluetooth */
+#define GPIO83_BT_ON				83
+
+/* GPS */
+#define GPIO23_GPS_UNKNOWN1			23
+#define GPIO26_GPS_ON				26
+#define GPIO27_GPS_RESET			27
+#define GPIO106_GPS_UNKNOWN2			106
+#define GPIO107_GPS_UNKNOWN3			107
+
+/* GSM */
+#define GPIO24_GSM_MOD_RESET_CMD		24
+#define GPIO88_GSM_nMOD_ON_CMD			88
+#define GPIO90_GSM_nMOD_OFF_CMD			90
+#define GPIO114_GSM_nMOD_DTE_UART_STATE 	114
+#define GPIO25_GSM_MOD_ON_STATE			25
+#define GPIO113_GSM_EVENT			113
+
+/* SOUND */
+#define GPIO12_HPJACK_INSERT			12
+
+/* LEDS */
+#define GPIO10_LED_nCharging			10
+#define GPIO97_LED_nBlue			97
+#define GPIO98_LED_nOrange			98
+#define GPIO82_LED_nVibra			82
+#define GPIO115_LED_nKeyboard			115
+
+/* Keyboard */
+#define GPIO0_KEY_POWER				0
+#define GPIO93_KEY_VOLUME_UP			93
+#define GPIO94_KEY_VOLUME_DOWN			94
+
+extern struct input_dev *mioa701_evdev;
+extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
+
+/* Assembler externals mioa701_bootresume.S */
+extern u32 mioa701_bootstrap;
+extern u32 mioa701_jumpaddr;
+extern u32 mioa701_bootstrap_lg;
+
+#endif /* _MIOA701_H */
diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
index e848a47..95b6e2a 100644
--- a/arch/arm/mach-pxa/include/mach/ohci.h
+++ b/arch/arm/mach-pxa/include/mach/ohci.h
@@ -7,6 +7,22 @@ struct pxaohci_platform_data {
 	int (*init)(struct device *);
 	void (*exit)(struct device *);
 
+	unsigned long flags;
+#define ENABLE_PORT1		(1 << 0)
+#define ENABLE_PORT2		(1 << 1)
+#define ENABLE_PORT3		(1 << 2)
+#define ENABLE_PORT_ALL		(ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
+
+#define POWER_SENSE_LOW		(1 << 3)
+#define POWER_CONTROL_LOW	(1 << 4)
+#define NO_OC_PROTECTION	(1 << 5)
+#define OC_MODE_GLOBAL		(0 << 6)
+#define OC_MODE_PERPORT		(1 << 6)
+
+	int power_on_delay;	/* Power On to Power Good time - in ms
+				 * HCD must wait for this duration before
+				 * accessing a powered on port
+				 */
 	int port_mode;
 #define PMM_NPS_MODE           1
 #define PMM_GLOBAL_MODE        2
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
new file mode 100644
index 0000000..5032307
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -0,0 +1,80 @@
+/*
+ * GPIOs and interrupts for Palm Zire72 Handheld Computer
+ *
+ * Authors:	Alex Osborne <bobofdoom@gmail.com>
+ *		Jan Herman <2hp@seznam.cz>
+ *		Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMZ72_H_
+#define _INCLUDE_PALMZ72_H_
+
+/* Power and control */
+#define GPIO_NR_PALMZ72_GPIO_RESET		1
+#define GPIO_NR_PALMZ72_POWER_DETECT		0
+
+/* SD/MMC */
+#define GPIO_NR_PALMZ72_SD_DETECT_N		14
+#define GPIO_NR_PALMZ72_SD_POWER_N		98
+#define GPIO_NR_PALMZ72_SD_RO 115
+
+/* Touchscreen */
+#define GPIO_NR_PALMZ72_WM9712_IRQ		27
+
+/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMZ72_IR_DISABLE		49
+
+/* USB */
+#define GPIO_NR_PALMZ72_USB_DETECT_N		15
+#define GPIO_NR_PALMZ72_USB_POWER		95
+#define GPIO_NR_PALMZ72_USB_PULLUP		12
+
+/* LCD/Backlight */
+#define GPIO_NR_PALMZ72_BL_POWER		20
+#define GPIO_NR_PALMZ72_LCD_POWER		96
+
+/* LED */
+#define GPIO_NR_PALMZ72_LED_GREEN		88
+
+/* Bluetooth */
+#define GPIO_NR_PALMZ72_BT_POWER		17
+#define GPIO_NR_PALMZ72_BT_RESET		83
+
+/** Initial values **/
+
+/* Battery */
+#define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMZ72_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMZ72_MAX_LIFE_MINS		360	/* on-life in minutes */
+
+/* Backlight */
+#define PALMZ72_MAX_INTENSITY		0xFE
+#define PALMZ72_DEFAULT_INTENSITY	0x7E
+#define PALMZ72_LIMIT_MASK		0x7F
+#define PALMZ72_PRESCALER		0x3F
+#define PALMZ72_PERIOD_NS		3500
+
+#ifdef CONFIG_PM
+struct palmz72_resume_info {
+	u32 magic0;		/* 0x0 */
+	u32 magic1;		/* 0x4 */
+	u32 resume_addr;	/* 0x8 */
+	u32 pad[11];		/* 0xc..0x37 */
+	u32 arm_control;	/* 0x38 */
+	u32 aux_control;	/* 0x3c */
+	u32 ttb;		/* 0x40 */
+	u32 domain_access;	/* 0x44 */
+	u32 process_id;		/* 0x48 */
+};
+#endif
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index 261e5bc..8334246 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -15,6 +15,8 @@ struct pxa_cpu_pm_fns {
 	void	(*restore)(unsigned long *);
 	int	(*valid)(suspend_state_t state);
 	void	(*enter)(suspend_state_t state);
+	int	(*prepare)(void);
+	void	(*finish)(void);
 };
 
 extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 67debc4..0b3e6d0 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -23,6 +23,7 @@
 #define POODLE_GPIO_AC_IN		(1)
 #define POODLE_GPIO_CO			16
 #define POODLE_GPIO_TP_INT		(5)
+#define POODLE_GPIO_TP_CS		(24)
 #define POODLE_GPIO_WAKEUP		(11)	/* change battery */
 #define POODLE_GPIO_GA_INT		(10)
 #define POODLE_GPIO_IR_ON		(22)
@@ -70,6 +71,14 @@
 #define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
 #define POODLE_SCOOP_IO_OUT	( 0 )
 
+#define POODLE_SCOOP_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define POODLE_GPIO_CHARGE_ON	(POODLE_SCOOP_GPIO_BASE + 0)
+#define POODLE_GPIO_CP401	(POODLE_SCOOP_GPIO_BASE + 2)
+#define POODLE_GPIO_VPEN	(POODLE_SCOOP_GPIO_BASE + 7)
+#define POODLE_GPIO_L_PCLK	(POODLE_SCOOP_GPIO_BASE + 9)
+#define POODLE_GPIO_L_LCLK	(POODLE_SCOOP_GPIO_BASE + 10)
+#define POODLE_GPIO_HS_OUT	(POODLE_SCOOP_GPIO_BASE + 11)
+
 #define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
 #define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
 #define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 12288ca..15295d9 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -69,30 +69,18 @@
 /*
  * DMA Controller
  */
-
-#define DCSR0		__REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
-#define DCSR1		__REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
-#define DCSR2		__REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
-#define DCSR3		__REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
-#define DCSR4		__REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
-#define DCSR5		__REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
-#define DCSR6		__REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
-#define DCSR7		__REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
-#define DCSR8		__REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
-#define DCSR9		__REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
-#define DCSR10		__REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
-#define DCSR11		__REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
-#define DCSR12		__REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
-#define DCSR13		__REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
-#define DCSR14		__REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
-#define DCSR15		__REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
-
 #define DCSR(x)		__REG2(0x40000000, (x) << 2)
 
 #define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
 #define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
 #define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#ifdef CONFIG_PXA27x
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
 #define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
 #define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
@@ -101,11 +89,6 @@
 #define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
 #define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
 #endif
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
 
 #define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
 #define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
@@ -114,145 +97,9 @@
 			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
 			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
 
-#define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
-#define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
-#define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
-#define DRCMR3		__REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
-#define DRCMR4		__REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
-#define DRCMR5		__REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
-#define DRCMR6		__REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
-#define DRCMR7		__REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
-#define DRCMR8		__REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
-#define DRCMR9		__REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
-#define DRCMR10		__REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
-#define DRCMR11		__REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
-#define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
-#define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
-#define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
-#define DRCMR15		__REG(0x4000013c)  /* Request to Channel Map Register for SSP2 receive Request */
-#define DRCMR16		__REG(0x40000140)  /* Request to Channel Map Register for SSP2 transmit Request */
-#define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
-#define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
-#define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
-#define DRCMR20		__REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
-#define DRCMR21		__REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
-#define DRCMR22		__REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
-#define DRCMR23		__REG(0x4000015c)  /* Reserved */
-#define DRCMR24		__REG(0x40000160)  /* Reserved */
-#define DRCMR25		__REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
-#define DRCMR26		__REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
-#define DRCMR27		__REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
-#define DRCMR28		__REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
-#define DRCMR29		__REG(0x40000174)  /* Reserved */
-#define DRCMR30		__REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
-#define DRCMR31		__REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
-#define DRCMR32		__REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
-#define DRCMR33		__REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
-#define DRCMR34		__REG(0x40000188)  /* Reserved */
-#define DRCMR35		__REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
-#define DRCMR36		__REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
-#define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
-#define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
-#define DRCMR39		__REG(0x4000019C)  /* Reserved */
-#define DRCMR66		__REG(0x40001108)  /* Request to Channel Map Register for SSP3 receive Request */
-#define DRCMR67		__REG(0x4000110C)  /* Request to Channel Map Register for SSP3 transmit Request */
-#define DRCMR68		__REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
-#define DRCMR69		__REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
-#define DRCMR70		__REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
-
-#define DRCMRRXSADR	DRCMR2
-#define DRCMRTXSADR	DRCMR3
-#define DRCMRRXBTRBR	DRCMR4
-#define DRCMRTXBTTHR	DRCMR5
-#define DRCMRRXFFRBR	DRCMR6
-#define DRCMRTXFFTHR	DRCMR7
-#define DRCMRRXMCDR	DRCMR8
-#define DRCMRRXMODR	DRCMR9
-#define DRCMRTXMODR	DRCMR10
-#define DRCMRRXPCDR	DRCMR11
-#define DRCMRTXPCDR	DRCMR12
-#define DRCMRRXSSDR	DRCMR13
-#define DRCMRTXSSDR	DRCMR14
-#define DRCMRRXSS2DR   DRCMR15
-#define DRCMRTXSS2DR   DRCMR16
-#define DRCMRRXICDR	DRCMR17
-#define DRCMRTXICDR	DRCMR18
-#define DRCMRRXSTRBR	DRCMR19
-#define DRCMRTXSTTHR	DRCMR20
-#define DRCMRRXMMC	DRCMR21
-#define DRCMRTXMMC	DRCMR22
-#define DRCMRRXSS3DR   DRCMR66
-#define DRCMRTXSS3DR   DRCMR67
-#define DRCMRUDC(x)	DRCMR((x) + 24)
-
 #define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
 #define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
 
-#define DDADR0		__REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
-#define DSADR0		__REG(0x40000204)  /* DMA Source Address Register Channel 0 */
-#define DTADR0		__REG(0x40000208)  /* DMA Target Address Register Channel 0 */
-#define DCMD0		__REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
-#define DDADR1		__REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
-#define DSADR1		__REG(0x40000214)  /* DMA Source Address Register Channel 1 */
-#define DTADR1		__REG(0x40000218)  /* DMA Target Address Register Channel 1 */
-#define DCMD1		__REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
-#define DDADR2		__REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
-#define DSADR2		__REG(0x40000224)  /* DMA Source Address Register Channel 2 */
-#define DTADR2		__REG(0x40000228)  /* DMA Target Address Register Channel 2 */
-#define DCMD2		__REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
-#define DDADR3		__REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
-#define DSADR3		__REG(0x40000234)  /* DMA Source Address Register Channel 3 */
-#define DTADR3		__REG(0x40000238)  /* DMA Target Address Register Channel 3 */
-#define DCMD3		__REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
-#define DDADR4		__REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
-#define DSADR4		__REG(0x40000244)  /* DMA Source Address Register Channel 4 */
-#define DTADR4		__REG(0x40000248)  /* DMA Target Address Register Channel 4 */
-#define DCMD4		__REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
-#define DDADR5		__REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
-#define DSADR5		__REG(0x40000254)  /* DMA Source Address Register Channel 5 */
-#define DTADR5		__REG(0x40000258)  /* DMA Target Address Register Channel 5 */
-#define DCMD5		__REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
-#define DDADR6		__REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
-#define DSADR6		__REG(0x40000264)  /* DMA Source Address Register Channel 6 */
-#define DTADR6		__REG(0x40000268)  /* DMA Target Address Register Channel 6 */
-#define DCMD6		__REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
-#define DDADR7		__REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
-#define DSADR7		__REG(0x40000274)  /* DMA Source Address Register Channel 7 */
-#define DTADR7		__REG(0x40000278)  /* DMA Target Address Register Channel 7 */
-#define DCMD7		__REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
-#define DDADR8		__REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
-#define DSADR8		__REG(0x40000284)  /* DMA Source Address Register Channel 8 */
-#define DTADR8		__REG(0x40000288)  /* DMA Target Address Register Channel 8 */
-#define DCMD8		__REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
-#define DDADR9		__REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
-#define DSADR9		__REG(0x40000294)  /* DMA Source Address Register Channel 9 */
-#define DTADR9		__REG(0x40000298)  /* DMA Target Address Register Channel 9 */
-#define DCMD9		__REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
-#define DDADR10		__REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
-#define DSADR10		__REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
-#define DTADR10		__REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
-#define DCMD10		__REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
-#define DDADR11		__REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
-#define DSADR11		__REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
-#define DTADR11		__REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
-#define DCMD11		__REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
-#define DDADR12		__REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
-#define DSADR12		__REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
-#define DTADR12		__REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
-#define DCMD12		__REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
-#define DDADR13		__REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
-#define DSADR13		__REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
-#define DTADR13		__REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
-#define DCMD13		__REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
-#define DDADR14		__REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
-#define DSADR14		__REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
-#define DTADR14		__REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
-#define DCMD14		__REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
-#define DDADR15		__REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
-#define DSADR15		__REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
-#define DTADR15		__REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
-#define DCMD15		__REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
-
 #define DDADR(x)	__REG2(0x40000200, (x) << 4)
 #define DSADR(x)	__REG2(0x40000204, (x) << 4)
 #define DTADR(x)	__REG2(0x40000208, (x) << 4)
@@ -418,91 +265,13 @@
 
 
 /*
- * I2C registers
+ * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
  */
 
-#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
-#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
-#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
-#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
-#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
-#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
-
-#define ICR_START	(1 << 0)	   /* start bit */
-#define ICR_STOP	(1 << 1)	   /* stop bit */
-#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
-#define ICR_TB		(1 << 3)	   /* transfer byte bit */
-#define ICR_MA		(1 << 4)	   /* master abort */
-#define ICR_SCLE	(1 << 5)	   /* master clock enable */
-#define ICR_IUE		(1 << 6)	   /* unit enable */
-#define ICR_GCD		(1 << 7)	   /* general call disable */
-#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
-#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
-#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
-#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
-#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
-#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
-#define ICR_UR		(1 << 14)	   /* unit reset */
-
-#define ISR_RWM		(1 << 0)	   /* read/write mode */
-#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
-#define ISR_UB		(1 << 2)	   /* unit busy */
-#define ISR_IBB		(1 << 3)	   /* bus busy */
-#define ISR_SSD		(1 << 4)	   /* slave stop detected */
-#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
-#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
-#define ISR_IRF		(1 << 7)	   /* rx buffer full */
-#define ISR_GCAD	(1 << 8)	   /* general call address detected */
-#define ISR_SAD		(1 << 9)	   /* slave address detected */
-#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
-
-
 /*
- * Serial Audio Controller
+ * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
  */
 
-#define SACR0		__REG(0x40400000)  /* Global Control Register */
-#define SACR1		__REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
-#define SASR0		__REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-#define SAIMR		__REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
-#define SAICR		__REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
-#define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
-#define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
-
-#define SACR0_RFTH(x)	((x) << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x)	((x) << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
-#define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
-#define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
-#define SACR0_BCKD	(1 << 2) 	/* Bit Clock Direction */
-#define SACR0_ENB	(1 << 0)	/* Enable I2S Link */
-#define SACR1_ENLBF	(1 << 5)	/* Enable Loopback */
-#define SACR1_DRPL	(1 << 4) 	/* Disable Replaying Function */
-#define SACR1_DREC	(1 << 3)	/* Disable Recording Function */
-#define SACR1_AMSL	(1 << 0)	/* Specify Alternate Mode */
-
-#define SASR0_I2SOFF	(1 << 7)	/* Controller Status */
-#define SASR0_ROR	(1 << 6)	/* Rx FIFO Overrun */
-#define SASR0_TUR	(1 << 5)	/* Tx FIFO Underrun */
-#define SASR0_RFS	(1 << 4)	/* Rx FIFO Service Request */
-#define SASR0_TFS	(1 << 3)	/* Tx FIFO Service Request */
-#define SASR0_BSY	(1 << 2)	/* I2S Busy */
-#define SASR0_RNE	(1 << 1)	/* Rx FIFO Not Empty */
-#define SASR0_TNF	(1 << 0) 	/* Tx FIFO Not Empty */
-
-#define SAICR_ROR	(1 << 6)	/* Clear Rx FIFO Overrun Interrupt */
-#define SAICR_TUR	(1 << 5)	/* Clear Tx FIFO Underrun Interrupt */
-
-#define SAIMR_ROR	(1 << 6)	/* Enable Rx FIFO Overrun Condition Interrupt */
-#define SAIMR_TUR	(1 << 5)	/* Enable Tx FIFO Underrun Condition Interrupt */
-#define SAIMR_RFS	(1 << 4)	/* Enable Rx FIFO Service Interrupt */
-#define SAIMR_TFS	(1 << 3)	/* Enable Tx FIFO Service Interrupt */
-
 /*
  * AC97 Controller registers
  */
@@ -989,77 +758,6 @@
 
 #endif
 
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-/*
- * UHC: USB Host Controller (OHCI-like) register definitions
- */
-#define UHC_BASE_PHYS	(0x4C000000)
-#define UHCREV		__REG(0x4C000000) /* UHC HCI Spec Revision */
-#define UHCHCON		__REG(0x4C000004) /* UHC Host Control Register */
-#define UHCCOMS		__REG(0x4C000008) /* UHC Command Status Register */
-#define UHCINTS		__REG(0x4C00000C) /* UHC Interrupt Status Register */
-#define UHCINTE		__REG(0x4C000010) /* UHC Interrupt Enable */
-#define UHCINTD		__REG(0x4C000014) /* UHC Interrupt Disable */
-#define UHCHCCA		__REG(0x4C000018) /* UHC Host Controller Comm. Area */
-#define UHCPCED		__REG(0x4C00001C) /* UHC Period Current Endpt Descr */
-#define UHCCHED		__REG(0x4C000020) /* UHC Control Head Endpt Descr */
-#define UHCCCED		__REG(0x4C000024) /* UHC Control Current Endpt Descr */
-#define UHCBHED		__REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
-#define UHCBCED		__REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
-#define UHCDHEAD	__REG(0x4C000030) /* UHC Done Head */
-#define UHCFMI		__REG(0x4C000034) /* UHC Frame Interval */
-#define UHCFMR		__REG(0x4C000038) /* UHC Frame Remaining */
-#define UHCFMN		__REG(0x4C00003C) /* UHC Frame Number */
-#define UHCPERS		__REG(0x4C000040) /* UHC Periodic Start */
-#define UHCLS		__REG(0x4C000044) /* UHC Low Speed Threshold */
-
-#define UHCRHDA		__REG(0x4C000048) /* UHC Root Hub Descriptor A */
-#define UHCRHDA_NOCP	(1 << 12)	/* No over current protection */
-
-#define UHCRHDB		__REG(0x4C00004C) /* UHC Root Hub Descriptor B */
-#define UHCRHS		__REG(0x4C000050) /* UHC Root Hub Status */
-#define UHCRHPS1	__REG(0x4C000054) /* UHC Root Hub Port 1 Status */
-#define UHCRHPS2	__REG(0x4C000058) /* UHC Root Hub Port 2 Status */
-#define UHCRHPS3	__REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
-
-#define UHCSTAT		__REG(0x4C000060) /* UHC Status Register */
-#define UHCSTAT_UPS3	(1 << 16)	/* USB Power Sense Port3 */
-#define UHCSTAT_SBMAI	(1 << 15)	/* System Bus Master Abort Interrupt*/
-#define UHCSTAT_SBTAI	(1 << 14)	/* System Bus Target Abort Interrupt*/
-#define UHCSTAT_UPRI	(1 << 13)	/* USB Port Resume Interrupt */
-#define UHCSTAT_UPS2	(1 << 12)	/* USB Power Sense Port 2 */
-#define UHCSTAT_UPS1	(1 << 11)	/* USB Power Sense Port 1 */
-#define UHCSTAT_HTA	(1 << 10)	/* HCI Target Abort */
-#define UHCSTAT_HBA	(1 << 8)	/* HCI Buffer Active */
-#define UHCSTAT_RWUE	(1 << 7)	/* HCI Remote Wake Up Event */
-
-#define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
-#define UHCHR_SSEP3	(1 << 11)	/* Sleep Standby Enable for Port3 */
-#define UHCHR_SSEP2	(1 << 10)	/* Sleep Standby Enable for Port2 */
-#define UHCHR_SSEP1	(1 << 9)	/* Sleep Standby Enable for Port1 */
-#define UHCHR_PCPL	(1 << 7)	/* Power control polarity low */
-#define UHCHR_PSPL	(1 << 6)	/* Power sense polarity low */
-#define UHCHR_SSE	(1 << 5)	/* Sleep Standby Enable */
-#define UHCHR_UIT	(1 << 4)	/* USB Interrupt Test */
-#define UHCHR_SSDC	(1 << 3)	/* Simulation Scale Down Clock */
-#define UHCHR_CGR	(1 << 2)	/* Clock Generation Reset */
-#define UHCHR_FHR	(1 << 1)	/* Force Host Controller Reset */
-#define UHCHR_FSBIR	(1 << 0)	/* Force System Bus Iface Reset */
-
-#define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
-#define UHCHIE_UPS3IE	(1 << 14)	/* Power Sense Port3 IntEn */
-#define UHCHIE_UPRIE	(1 << 13)	/* Port Resume IntEn */
-#define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
-#define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
-#define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
-					   Interrupt Enable*/
-#define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
-#define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
-
-#define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */
-
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-
 /* PWRMODE register M field values */
 
 #define PWRMODE_IDLE		0x1
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 39eb683..b1fcd10 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -131,6 +131,28 @@
 #define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
 #define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
 
+#define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
+#define ACCR_SPDIS		(1 << 30)	/* System PLL Output Disable */
+#define ACCR_D0CS		(1 << 26)	/* D0 Mode Clock Select */
+#define ACCR_PCCE		(1 << 11)	/* Power Mode Change Clock Enable */
+#define ACCR_DDR_D0CS		(1 << 7)	/* DDR SDRAM clock frequency in D0CS (PXA31x only) */
+
+#define ACCR_SMCFS_MASK		(0x7 << 23)	/* Static Memory Controller Frequency Select */
+#define ACCR_SFLFS_MASK		(0x3 << 18)	/* Frequency Select for Internal Memory Controller */
+#define ACCR_XSPCLK_MASK	(0x3 << 16)	/* Core Frequency during Frequency Change */
+#define ACCR_HSS_MASK		(0x3 << 14)	/* System Bus-Clock Frequency Select */
+#define ACCR_DMCFS_MASK		(0x3 << 12)	/* Dynamic Memory Controller Clock Frequency Select */
+#define ACCR_XN_MASK		(0x7 << 8)	/* Core PLL Turbo-Mode-to-Run-Mode Ratio */
+#define ACCR_XL_MASK		(0x1f)		/* Core PLL Run-Mode-to-Oscillator Ratio */
+
+#define ACCR_SMCFS(x)		(((x) & 0x7) << 23)
+#define ACCR_SFLFS(x)		(((x) & 0x3) << 18)
+#define ACCR_XSPCLK(x)		(((x) & 0x3) << 16)
+#define ACCR_HSS(x)		(((x) & 0x3) << 14)
+#define ACCR_DMCFS(x)		(((x) & 0x3) << 12)
+#define ACCR_XN(x)		(((x) & 0x7) << 8)
+#define ACCR_XL(x)		((x) & 0x1f)
+
 /*
  * Clock Enable Bit
  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
index eb4b190..eb35fca 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
@@ -4,6 +4,43 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+struct pxa3xx_nand_timing {
+	unsigned int	tCH;  /* Enable signal hold time */
+	unsigned int	tCS;  /* Enable signal setup time */
+	unsigned int	tWH;  /* ND_nWE high duration */
+	unsigned int	tWP;  /* ND_nWE pulse time */
+	unsigned int	tRH;  /* ND_nRE high duration */
+	unsigned int	tRP;  /* ND_nRE pulse width */
+	unsigned int	tR;   /* ND_nWE high to ND_nRE low for read */
+	unsigned int	tWHR; /* ND_nWE high to ND_nRE low for status read */
+	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
+};
+
+struct pxa3xx_nand_cmdset {
+	uint16_t	read1;
+	uint16_t	read2;
+	uint16_t	program;
+	uint16_t	read_status;
+	uint16_t	read_id;
+	uint16_t	erase;
+	uint16_t	reset;
+	uint16_t	lock;
+	uint16_t	unlock;
+	uint16_t	lock_status;
+};
+
+struct pxa3xx_nand_flash {
+	const struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
+	const struct pxa3xx_nand_cmdset *cmdset;
+
+	uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */
+	uint32_t page_size;	/* Page size in bytes (PAGE_SZ) */
+	uint32_t flash_width;	/* Width of Flash memory (DWIDTH_M) */
+	uint32_t dfc_width;	/* Width of flash controller(DWIDTH_C) */
+	uint32_t num_blocks;	/* Number of physical blocks in Flash */
+	uint32_t chip_id;
+};
+
 struct pxa3xx_nand_platform_data {
 
 	/* the data flash bus is shared between the Static Memory
@@ -12,8 +49,11 @@ struct pxa3xx_nand_platform_data {
 	 */
 	int	enable_arbiter;
 
-	struct mtd_partition *parts;
-	unsigned int	nr_parts;
+	const struct mtd_partition		*parts;
+	unsigned int				nr_parts;
+
+	const struct pxa3xx_nand_flash * 	flash;
+	size_t					num_flash;
 };
 
 extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 9489a48..7b8842c 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -10,9 +10,12 @@
 extern unsigned int reset_status;
 extern void clear_reset_status(unsigned int mask);
 
-/*
- * register GPIO as reset generator
+/**
+ * init_gpio_reset() - register GPIO as reset generator
+ *
+ * @gpio - gpio nr
+ * @output - set gpio as out/low instead of input during normal work
  */
-extern int init_gpio_reset(int gpio);
+extern int init_gpio_reset(int gpio, int output);
 
 #endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index bd14365..fa1998c 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -16,6 +16,7 @@
 #endif
 
 #include <linux/fb.h>
+#include <linux/gpio.h>
 
 /* Spitz/Akita GPIOs */
 
@@ -100,13 +101,24 @@
 #define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
 #define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
 
-#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
-                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
+#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \
                                SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
 #define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
 #define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
 #define SPITZ_SCP_SUS_SET     0
 
+#define SPITZ_SCP_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define SPITZ_GPIO_LED_GREEN	(SPITZ_SCP_GPIO_BASE + 0)
+#define SPITZ_GPIO_JK_B		(SPITZ_SCP_GPIO_BASE + 1)
+#define SPITZ_GPIO_CHRG_ON	(SPITZ_SCP_GPIO_BASE + 2)
+#define SPITZ_GPIO_MUTE_L	(SPITZ_SCP_GPIO_BASE + 3)
+#define SPITZ_GPIO_MUTE_R	(SPITZ_SCP_GPIO_BASE + 4)
+#define SPITZ_GPIO_CF_POWER	(SPITZ_SCP_GPIO_BASE + 5)
+#define SPITZ_GPIO_LED_ORANGE	(SPITZ_SCP_GPIO_BASE + 6)
+#define SPITZ_GPIO_JK_A		(SPITZ_SCP_GPIO_BASE + 7)
+#define SPITZ_GPIO_ADC_TEMP_ON	(SPITZ_SCP_GPIO_BASE + 8)
+
 /* Spitz Scoop Device (No. 2) GPIOs */
 /* Suspend States in comments */
 #define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
@@ -119,15 +131,36 @@
 #define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
 #define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
 
-#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
                            SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
                            SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
 
-#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
 #define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
                              SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
 #define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
 
+#define SPITZ_SCP2_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define SPITZ_GPIO_IR_ON		(SPITZ_SCP2_GPIO_BASE + 0)
+#define SPITZ_GPIO_AKIN_PULLUP		(SPITZ_SCP2_GPIO_BASE + 1)
+#define SPITZ_GPIO_RESERVED_1		(SPITZ_SCP2_GPIO_BASE + 2)
+#define SPITZ_GPIO_RESERVED_2		(SPITZ_SCP2_GPIO_BASE + 3)
+#define SPITZ_GPIO_RESERVED_3		(SPITZ_SCP2_GPIO_BASE + 4)
+#define SPITZ_GPIO_RESERVED_4		(SPITZ_SCP2_GPIO_BASE + 5)
+#define SPITZ_GPIO_BACKLIGHT_CONT	(SPITZ_SCP2_GPIO_BASE + 6)
+#define SPITZ_GPIO_BACKLIGHT_ON		(SPITZ_SCP2_GPIO_BASE + 7)
+#define SPITZ_GPIO_MIC_BIAS		(SPITZ_SCP2_GPIO_BASE + 8)
+
+/* Akita IO Expander GPIOs */
+#define AKITA_IOEXP_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define AKITA_GPIO_RESERVED_0		(AKITA_IOEXP_GPIO_BASE + 0)
+#define AKITA_GPIO_RESERVED_1		(AKITA_IOEXP_GPIO_BASE + 1)
+#define AKITA_GPIO_MIC_BIAS		(AKITA_IOEXP_GPIO_BASE + 2)
+#define AKITA_GPIO_BACKLIGHT_ON		(AKITA_IOEXP_GPIO_BASE + 3)
+#define AKITA_GPIO_BACKLIGHT_CONT	(AKITA_IOEXP_GPIO_BASE + 4)
+#define AKITA_GPIO_AKIN_PULLUP		(AKITA_IOEXP_GPIO_BASE + 5)
+#define AKITA_GPIO_IR_ON		(AKITA_IOEXP_GPIO_BASE + 6)
+#define AKITA_GPIO_RESERVED_7		(AKITA_IOEXP_GPIO_BASE + 7)
 
 /* Spitz IRQ Definitions */
 
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
index a012882..cb5cb76 100644
--- a/arch/arm/mach-pxa/include/mach/ssp.h
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -20,6 +20,7 @@
 #define __ASM_ARCH_SSP_H
 
 #include <linux/list.h>
+#include <linux/io.h>
 
 enum pxa_ssp_type {
 	SSP_UNDEFINED = 0,
@@ -78,6 +79,29 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
 int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
 void ssp_exit(struct ssp_dev *dev);
 
+/**
+ * ssp_write_reg - Write to a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to write to
+ * @val: Value to be written.
+ */
+static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
+{
+	__raw_writel(val, dev->mmio_base + reg);
+}
+
+/**
+ * ssp_read_reg - Read from a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to read from
+ */
+static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg)
+{
+	return __raw_readl(dev->mmio_base + reg);
+}
+
 struct ssp_device *ssp_request(int port, const char *label);
 void ssp_free(struct ssp_device *);
 #endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index a72803f..4df2d38 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -59,8 +59,6 @@
  * TC6393XB GPIOs
  */
 #define TOSA_TC6393XB_GPIO_BASE		(NR_BUILTIN_GPIO + 2 * 12)
-#define TOSA_TC6393XB_GPIO(i)		(TOSA_TC6393XB_GPIO_BASE + (i))
-#define TOSA_TC6393XB_GPIO_BIT(gpio)	(1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
 
 #define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
 #define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
@@ -195,4 +193,7 @@
 #define TOSA_KEY_MAIL		KEY_MAIL
 #endif
 
+struct spi_device;
+extern int tosa_bl_enable(struct spi_device *spi, int enable);
+
 #endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index 641d0ec..903e1a2 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -17,11 +17,16 @@
 #define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
 #define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)			/* Logic chip on ConXS-Board CSFR register */
-#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)	/* Logic chip on ConXS-Board BOCR register */
-#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)	/* Logic chip on ConXS-Board IRCR register*/
-#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)	/* Logic chip on ConXS-Board UPSR register*/
-#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)	/* Logic chip on ConXS-Board DICR register*/
+				/* Logic on ConXS-board CSFR register*/
+#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)
+				/* Logic on ConXS-board BOCR register*/
+#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)
+				/* Logic on ConXS-board IRCR register*/
+#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)
+				/* Logic on ConXS-board UPSR register*/
+#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)
+				/* Logic on ConXS-board DICR register*/
+#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)
 
 /* virtual memory regions */
 #define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
@@ -54,6 +59,15 @@
 #define GPIO_MMC_DET		12
 #define TRIZEPS4_MMC_IRQ	IRQ_GPIO(GPIO_MMC_DET)
 
+/* DOC NAND chip */
+#define GPIO_DOC_LOCK           94
+#define GPIO_DOC_IRQ            93
+#define TRIZEPS4_DOC_IRQ        IRQ_GPIO(GPIO_DOC_IRQ)
+
+/* SPI interface */
+#define GPIO_SPI                53
+#define TRIZEPS4_SPI_IRQ        IRQ_GPIO(GPIO_SPI)
+
 /* LEDS using tx2 / rx2 */
 #define GPIO_SYS_BUSY_LED	46
 #define GPIO_HEARTBEAT_LED	47
@@ -62,24 +76,66 @@
 #define GPIO_PIC		0
 #define TRIZEPS4_PIC_IRQ	IRQ_GPIO(GPIO_PIC)
 
-#define CFSR_P2V(x)		((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
-#define CFSR_V2P(x)		((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+#ifdef CONFIG_MACH_TRIZEPS_CONXS
+/* for CONXS base board define these registers */
+#define CFSR_P2V(x)	((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x)	((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
 
-#define BCR_P2V(x)		((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
-#define BCR_V2P(x)		((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+#define BCR_P2V(x)	((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x)	((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
 
-#define DCR_P2V(x)		((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
-#define DCR_V2P(x)		((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+#define DCR_P2V(x)	((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x)	((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#define IRCR_P2V(x)	((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
+#define IRCR_V2P(x)	((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
 
 #ifndef __ASSEMBLY__
-#define ConXS_CFSR		(*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
-#define ConXS_BCR		(*((volatile unsigned short *)BCR_P2V(0x0E000000)))
-#define ConXS_DCR		(*((volatile unsigned short *)DCR_P2V(0x0F800000)))
+static inline unsigned short CFSR_readw(void)
+{
+	/* [Compact Flash Status Register] is read only */
+	return *((unsigned short *)CFSR_P2V(0x0C000000));
+}
+static inline void BCR_writew(unsigned short value)
+{
+	/* [Board Control Regsiter] is write only */
+	*((unsigned short *)BCR_P2V(0x0E000000)) = value;
+}
+static inline void DCR_writew(unsigned short value)
+{
+	/* [Display Control Register] is write only */
+	*((unsigned short *)DCR_P2V(0x0E000000)) = value;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+	/* [InfraRed data Control Register] is write only */
+	*((unsigned short *)IRCR_P2V(0x0E000000)) = value;
+}
 #else
 #define ConXS_CFSR		CFSR_P2V(0x0C000000)
 #define ConXS_BCR		BCR_P2V(0x0E000000)
 #define ConXS_DCR		DCR_P2V(0x0F800000)
+#define ConXS_IRCR		IRCR_P2V(0x0F800000)
 #endif
+#else
+/* for whatever baseboard define function registers */
+static inline unsigned short CFSR_readw(void)
+{
+	return 0;
+}
+static inline void BCR_writew(unsigned short value)
+{
+	;
+}
+static inline void DCR_writew(unsigned short value)
+{
+	;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+	;
+}
+#endif	/* CONFIG_MACH_TRIZEPS_CONXS */
 
 #define ConXS_CFSR_BVD_MASK	0x0003
 #define ConXS_CFSR_BVD1		(1 << 0)
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h
new file mode 100644
index 0000000..10988c2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/viper.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-pxa/include/mach/viper.h
+ *
+ * Author:	Ian Campbell
+ * Created:	Feb 03, 2003
+ * Copyright:	Arcom Control Systems.
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ *			      <marc.zyngier@altran.com>
+ *
+ * Created based on lubbock.h:
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_VIPER_H
+#define ARCH_VIPER_H
+
+#define VIPER_BOOT_PHYS		PXA_CS0_PHYS
+#define VIPER_FLASH_PHYS	PXA_CS1_PHYS
+#define VIPER_ETH_PHYS		PXA_CS2_PHYS
+#define VIPER_USB_PHYS		PXA_CS3_PHYS
+#define VIPER_ETH_DATA_PHYS	PXA_CS4_PHYS
+#define VIPER_CPLD_PHYS		PXA_CS5_PHYS
+
+#define VIPER_CPLD_BASE		(0xf0000000)
+#define VIPER_PC104IO_BASE	(0xf1000000)
+#define VIPER_USB_BASE		(0xf1800000)
+
+#define VIPER_ETH_GPIO		(0)
+#define VIPER_CPLD_GPIO		(1)
+#define VIPER_USB_GPIO		(2)
+#define VIPER_UARTA_GPIO	(4)
+#define VIPER_UARTB_GPIO	(3)
+#define VIPER_CF_CD_GPIO	(32)
+#define VIPER_CF_RDY_GPIO	(8)
+#define VIPER_BCKLIGHT_EN_GPIO	(9)
+#define VIPER_LCD_EN_GPIO	(10)
+#define VIPER_PSU_DATA_GPIO	(6)
+#define VIPER_PSU_CLK_GPIO	(11)
+#define VIPER_UART_SHDN_GPIO	(12)
+#define VIPER_BRIGHTNESS_GPIO	(16)
+#define VIPER_PSU_nCS_LD_GPIO	(19)
+#define VIPER_UPS_GPIO		(20)
+#define VIPER_CF_POWER_GPIO	(82)
+#define VIPER_TPM_I2C_SDA_GPIO	(26)
+#define VIPER_TPM_I2C_SCL_GPIO	(27)
+#define VIPER_RTC_I2C_SDA_GPIO	(83)
+#define VIPER_RTC_I2C_SCL_GPIO	(84)
+
+#define VIPER_CPLD_P2V(x)	((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
+#define VIPER_CPLD_V2P(x)	((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __VIPER_CPLD_REG(x)	(*((volatile u16 *)VIPER_CPLD_P2V(x)))
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
+
+/* ... Physical addresses */
+#define _VIPER_LO_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100000)
+#define _VIPER_ICR_PHYS		(VIPER_CPLD_PHYS + 0x100002)
+#define _VIPER_HI_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100004)
+#define _VIPER_VERSION_PHYS	(VIPER_CPLD_PHYS + 0x100006)
+#define VIPER_UARTA_PHYS	(VIPER_CPLD_PHYS + 0x300010)
+#define VIPER_UARTB_PHYS	(VIPER_CPLD_PHYS + 0x300000)
+#define _VIPER_SRAM_BASE	(VIPER_CPLD_PHYS + 0x800000)
+
+/* ... Virtual addresses */
+#define VIPER_LO_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
+#define VIPER_HI_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
+#define VIPER_VERSION		__VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
+#define VIPER_ICR		__VIPER_CPLD_REG(_VIPER_ICR_PHYS)
+
+/* Decode VIPER_VERSION register */
+#define VIPER_CPLD_REVISION(x)	(((x) >> 5) & 0x7)
+#define VIPER_BOARD_VERSION(x)	(((x) >> 3) & 0x3)
+#define VIPER_BOARD_ISSUE(x)	(((x) >> 0) & 0x7)
+
+/* Interrupt and Configuration Register (VIPER_ICR) */
+/* This is a write only register. Only CF_RST is used under Linux */
+
+extern void viper_cf_rst(int state);
+
+#define VIPER_ICR_RETRIG	(1 << 0)
+#define VIPER_ICR_AUTO_CLR	(1 << 1)
+#define VIPER_ICR_R_DIS		(1 << 2)
+#define VIPER_ICR_CF_RST	(1 << 3)
+
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index 0d35ca0..bf6785a 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -30,7 +30,7 @@ extern void zylonite_pxa300_init(void);
 static inline void zylonite_pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310())
-		panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__);
+		panic("%s: PXA300/PXA310 not supported\n", __func__);
 }
 #endif
 
@@ -40,7 +40,7 @@ extern void zylonite_pxa320_init(void);
 static inline void zylonite_pxa320_init(void)
 {
 	if (cpu_is_pxa320())
-		panic("%s: PXA320 not supported\n", __FUNCTION__);
+		panic("%s: PXA320 not supported\n", __func__);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 5e95c53..fa69c3a 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -57,7 +57,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 
 	pxa_internal_irq_nr = irq_nr;
 
-	for (irq = 0; irq < irq_nr; irq += 32) {
+	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
 		_ICMR(irq) = 0;	/* disable all IRQs */
 		_ICLR(irq) = 0;	/* all IRQs are IRQ, not FIQ */
 	}
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
deleted file mode 100644
index 3bc2900..0000000
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-trizeps4.c
- *
- *  Author:	Jürgen Schindele
- *  Created:	20 02, 2006
- *  Copyright:	Jürgen Schindele
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/types.h>
-#include <asm/leds.h>
-
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/trizeps4.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-#define SYS_BUSY		0x01
-#define HEARTBEAT		0x02
-#define BLINK			0x04
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void trizeps4_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);		/* LED1 */
-		pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);		/* LED2 */
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= HEARTBEAT;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~SYS_BUSY;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= SYS_BUSY;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= BLINK;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~BLINK;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		break;
-
-	case led_red_off:
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED) {
-		switch (hw_led_state) {
-			case 0:
-				GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-			case 1:
-				GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-			case 2:
-				GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-			case 3:
-				GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-		}
-	}
-	else {
-		/* turn all off */
-		GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-		GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
index e13eb84..bbe4d5f 100644
--- a/arch/arm/mach-pxa/leds.c
+++ b/arch/arm/mach-pxa/leds.c
@@ -24,8 +24,6 @@ pxa_leds_init(void)
 		leds_event = mainstone_leds_event;
 	if (machine_is_pxa_idp())
 		leds_event = idp_leds_event;
-	if (machine_is_trizeps4())
-		leds_event = trizeps4_leds_event;
 
 	leds_event(led_start);
 	return 0;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 58f3402..b4d00ab 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/spi/spi.h>
 #include <linux/smc91x.h>
 
 #include <asm/types.h>
@@ -38,6 +39,7 @@
 #include <mach/gpio.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
@@ -72,8 +74,8 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 
 	/* SSP2 */
 	GPIO25_SSP2_SCLK,
-	GPIO17_SSP2_FRM,
 	GPIO27_SSP2_TXD,
+	GPIO17_GPIO,	/* SFRM as chip-select */
 
 	/* Debug Ethernet */
 	GPIO90_GPIO,
@@ -123,160 +125,6 @@ static struct platform_device smc91x_device = {
 };
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/* use bit 30, 31 as the indicator of command parameter number */
-#define CMD0(x)		((0x00000000) | ((x) << 9))
-#define CMD1(x, x1)	((0x40000000) | ((x) << 9) | 0x100 | (x1))
-#define CMD2(x, x1, x2)	((0x80000000) | ((x) << 18) | 0x20000 |\
-			 ((x1) << 9) | 0x100 | (x2))
-
-static uint32_t lcd_panel_reset[] = {
-	CMD0(0x1), /* reset */
-	CMD0(0x0), /* nop */
-	CMD0(0x0), /* nop */
-	CMD0(0x0), /* nop */
-};
-
-static uint32_t lcd_panel_on[] = {
-	CMD0(0x29),		/* Display ON */
-	CMD2(0xB8, 0xFF, 0xF9),	/* Output Control */
-	CMD0(0x11),		/* Sleep out */
-	CMD1(0xB0, 0x16),	/* Wake */
-};
-
-static uint32_t lcd_panel_off[] = {
-	CMD0(0x28),		/* Display OFF */
-	CMD2(0xB8, 0x80, 0x02),	/* Output Control */
-	CMD0(0x10),		/* Sleep in */
-	CMD1(0xB0, 0x00),	/* Deep stand by in */
-};
-
-static uint32_t lcd_vga_pass_through[] = {
-	CMD1(0xB0, 0x16),
-	CMD1(0xBC, 0x80),
-	CMD1(0xE1, 0x00),
-	CMD1(0x36, 0x50),
-	CMD1(0x3B, 0x00),
-};
-
-static uint32_t lcd_qvga_pass_through[] = {
-	CMD1(0xB0, 0x16),
-	CMD1(0xBC, 0x81),
-	CMD1(0xE1, 0x00),
-	CMD1(0x36, 0x50),
-	CMD1(0x3B, 0x22),
-};
-
-static uint32_t lcd_vga_transfer[] = {
-	CMD1(0xcf, 0x02), 	/* Blanking period control (1) */
-	CMD2(0xd0, 0x08, 0x04),	/* Blanking period control (2) */
-	CMD1(0xd1, 0x01),	/* CKV timing control on/off */
-	CMD2(0xd2, 0x14, 0x00),	/* CKV 1,2 timing control */
-	CMD2(0xd3, 0x1a, 0x0f),	/* OEV timing control */
-	CMD2(0xd4, 0x1f, 0xaf),	/* ASW timing control (1) */
-	CMD1(0xd5, 0x14),	/* ASW timing control (2) */
-	CMD0(0x21),		/* Invert for normally black display */
-	CMD0(0x29),		/* Display on */
-};
-
-static uint32_t lcd_qvga_transfer[] = {
-	CMD1(0xd6, 0x02),	/* Blanking period control (1) */
-	CMD2(0xd7, 0x08, 0x04),	/* Blanking period control (2) */
-	CMD1(0xd8, 0x01),	/* CKV timing control on/off */
-	CMD2(0xd9, 0x00, 0x08),	/* CKV 1,2 timing control */
-	CMD2(0xde, 0x05, 0x0a),	/* OEV timing control */
-	CMD2(0xdf, 0x0a, 0x19),	/* ASW timing control (1) */
-	CMD1(0xe0, 0x0a),	/* ASW timing control (2) */
-	CMD0(0x21),		/* Invert for normally black display */
-	CMD0(0x29),		/* Display on */
-};
-
-static uint32_t lcd_panel_config[] = {
-	CMD2(0xb8, 0xff, 0xf9),	/* Output control */
-	CMD0(0x11),		/* sleep out */
-	CMD1(0xba, 0x01),	/* Display mode (1) */
-	CMD1(0xbb, 0x00),	/* Display mode (2) */
-	CMD1(0x3a, 0x60),	/* Display mode 18-bit RGB */
-	CMD1(0xbf, 0x10),	/* Drive system change control */
-	CMD1(0xb1, 0x56),	/* Booster operation setup */
-	CMD1(0xb2, 0x33),	/* Booster mode setup */
-	CMD1(0xb3, 0x11),	/* Booster frequency setup */
-	CMD1(0xb4, 0x02),	/* Op amp/system clock */
-	CMD1(0xb5, 0x35),	/* VCS voltage */
-	CMD1(0xb6, 0x40),	/* VCOM voltage */
-	CMD1(0xb7, 0x03),	/* External display signal */
-	CMD1(0xbd, 0x00),	/* ASW slew rate */
-	CMD1(0xbe, 0x00),	/* Dummy data for QuadData operation */
-	CMD1(0xc0, 0x11),	/* Sleep out FR count (A) */
-	CMD1(0xc1, 0x11),	/* Sleep out FR count (B) */
-	CMD1(0xc2, 0x11),	/* Sleep out FR count (C) */
-	CMD2(0xc3, 0x20, 0x40),	/* Sleep out FR count (D) */
-	CMD2(0xc4, 0x60, 0xc0),	/* Sleep out FR count (E) */
-	CMD2(0xc5, 0x10, 0x20),	/* Sleep out FR count (F) */
-	CMD1(0xc6, 0xc0),	/* Sleep out FR count (G) */
-	CMD2(0xc7, 0x33, 0x43),	/* Gamma 1 fine tuning (1) */
-	CMD1(0xc8, 0x44),	/* Gamma 1 fine tuning (2) */
-	CMD1(0xc9, 0x33),	/* Gamma 1 inclination adjustment */
-	CMD1(0xca, 0x00),	/* Gamma 1 blue offset adjustment */
-	CMD2(0xec, 0x01, 0xf0),	/* Horizontal clock cycles */
-};
-
-static void ssp_reconfig(struct ssp_dev *dev, int nparam)
-{
-	static int last_nparam = -1;
-
-	/* check if it is necessary to re-config SSP */
-	if (nparam == last_nparam)
-		return;
-
-	ssp_disable(dev);
-	ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
-
-	last_nparam = nparam;
-}
-
-static void ssp_send_cmd(uint32_t *cmd, int num)
-{
-	static int ssp_initialized;
-	static struct ssp_dev ssp2;
-
-	int i;
-
-	if (!ssp_initialized) {
-		ssp_init(&ssp2, 2, SSP_NO_IRQ);
-		ssp_initialized = 1;
-	}
-
-	clk_enable(ssp2.ssp->clk);
-	for (i = 0; i < num; i++, cmd++) {
-		ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
-		ssp_write_word(&ssp2, *cmd & 0x3fffffff);
-
-		/* FIXME: ssp_flush() is mandatory here to work */
-		ssp_flush(&ssp2);
-	}
-	clk_disable(ssp2.ssp->clk);
-}
-
-static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
-		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
-		if (var->xres > 240) {
-			/* VGA */
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
-		} else {
-			/* QVGA */
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
-		}
-	} else
-		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
-}
-
 static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
 	[0] = {
 		/* VGA */
@@ -312,7 +160,6 @@ static struct pxafb_mach_info littleton_lcd_info = {
 	.modes			= tpo_tdo24mtea1_modes,
 	.num_modes		= 2,
 	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power	= littleton_lcd_power,
 };
 
 static void littleton_init_lcd(void)
@@ -323,6 +170,51 @@ static void littleton_init_lcd(void)
 static inline void littleton_init_lcd(void) {};
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master littleton_spi_info = {
+	.num_chipselect		= 1,
+};
+
+static void littleton_tdo24m_cs(u32 cmd)
+{
+	gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.cs_control	= littleton_tdo24m_cs,
+};
+
+static struct spi_board_info littleton_spi_devices[] __initdata = {
+	{
+		.modalias	= "tdo24m",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.controller_data= &littleton_tdo24m_chip,
+	},
+};
+
+static void __init littleton_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
+	if (err) {
+		pr_warning("failed to request GPIO for LCS CS\n");
+		return;
+	}
+
+	gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
+
+	pxa2xx_set_spi_info(2, &littleton_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
+}
+#else
+static inline void littleton_init_spi(void) {}
+#endif
+
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
@@ -433,6 +325,7 @@ static void __init littleton_init(void)
 	 */
 	platform_device_register(&smc91x_device);
 
+	littleton_init_spi();
 	littleton_init_lcd();
 	littleton_init_keypad();
 	littleton_init_nand();
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index b703894..de3f67d 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -40,7 +40,7 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
 #include <mach/lpd270.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
@@ -51,6 +51,43 @@
 #include "generic.h"
 #include "devices.h"
 
+static unsigned long lpd270_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO15_nCS_1,	/* Mainboard Flash */
+	GPIO78_nCS_2,	/* CPLD + Ethernet */
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO16_PWM0_OUT,	/* Backlight */
+
+	/* USB Host */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* AC97 */
+	GPIO45_AC97_SYSCLK,
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
 
 static unsigned int lpd270_irq_enabled;
 
@@ -88,8 +125,7 @@ static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
 		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
 		if (likely(pending)) {
 			irq = LPD270_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 
 			pending = __raw_readw(LPD270_INT_STATUS) &
 						lpd270_irq_enabled;
@@ -265,8 +301,8 @@ static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
 static struct pxafb_mach_info sharp_lq057q3dc02 = {
 	.modes			= &sharp_lq057q3dc02_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 12.1" TFT SVGA (LoLo display number 2) */
@@ -287,8 +323,8 @@ static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
 static struct pxafb_mach_info sharp_lq121s1dg31 = {
 	.modes			= &sharp_lq121s1dg31_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 3.6" TFT QVGA (LoLo display number 3) */
@@ -309,8 +345,8 @@ static struct pxafb_mode_info sharp_lq036q1da01_mode = {
 static struct pxafb_mach_info sharp_lq036q1da01 = {
 	.modes			= &sharp_lq036q1da01_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 6.4" TFT VGA (LoLo display number 5) */
@@ -331,8 +367,8 @@ static struct pxafb_mode_info sharp_lq64d343_mode = {
 static struct pxafb_mach_info sharp_lq64d343 = {
 	.modes			= &sharp_lq64d343_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 10.4" TFT VGA (LoLo display number 7) */
@@ -353,8 +389,8 @@ static struct pxafb_mode_info sharp_lq10d368_mode = {
 static struct pxafb_mach_info sharp_lq10d368 = {
 	.modes			= &sharp_lq10d368_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 3.5" TFT QVGA (LoLo display number 8) */
@@ -375,8 +411,8 @@ static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
 	.modes			= &sharp_lq035q7db02_20_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 static struct pxafb_mach_info *lpd270_lcd_to_use;
@@ -411,27 +447,15 @@ static struct platform_device *platform_devices[] __initdata = {
 	&lpd270_flash_device[1],
 };
 
-static int lpd270_ohci_init(struct device *dev)
-{
-	/* setup Port1 GPIO pin. */
-	pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
-	pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
-
-	/* Set the Power Control Polarity Low and Power Sense
-	   Polarity Low to active low. */
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= lpd270_ohci_init,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
 static void __init lpd270_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
+
 	lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 	lpd270_flash_data[1].width = 4;
 
@@ -442,12 +466,6 @@ static void __init lpd270_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
-	/*
-	 * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
-	 */
-	pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
-	pxa_gpio_mode(GPIO16_PWM0_MD);
-
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	pxa_set_ac97_info(NULL);
@@ -473,15 +491,6 @@ static void __init lpd270_map_io(void)
 	pxa_map_io();
 	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
 
-	/* initialize sleep mode regs (wake-up sources, etc) */
-	PGSR0 = 0x00008800;
-	PGSR1 = 0x00000002;
-	PGSR2 = 0x0001FC00;
-	PGSR3 = 0x00001F81;
-	PWER  = 0xC0000002;
-	PRER  = 0x00000002;
-	PFER  = 0x00000002;
-
 	/* for use I SRAM as framebuffer.  */
 	PSLR |= 0x00000F04;
 	PCFR  = 0x00000066;
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 4ffdff2..bff7043 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -57,13 +57,36 @@
 
 static unsigned long lubbock_pin_config[] __initdata = {
 	GPIO15_nCS_1,	/* CS1 - Flash */
+	GPIO78_nCS_2,	/* CS2 - Baseboard FGPA */
 	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
+	GPIO80_nCS_4,	/* CS4 - SA1111 */
 
 	/* SSP data pins */
 	GPIO23_SSP1_SCLK,
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 
+	/* LCD - 16bpp DSTN */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
 	/* BTUART */
 	GPIO42_BTUART_RXD,
 	GPIO43_BTUART_TXD,
@@ -132,8 +155,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
 		GEDR(0) = GPIO_bit(0);	/* clear our parent irq */
 		if (likely(pending)) {
 			irq = LUBBOCK_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
 	} while (pending);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 143f28a..519138b 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -409,7 +409,7 @@ static struct platform_device backlight = {
  * LEDs
  */
 
-struct gpio_led gpio_leds[] = {
+static struct gpio_led gpio_leds[] = {
 	{
 		.name = "magician::vibra",
 		.default_trigger = "none",
@@ -669,18 +669,10 @@ static struct pxamci_platform_data magician_mci_info = {
  * USB OHCI
  */
 
-static int magician_ohci_init(struct device *dev)
-{
-	UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) &
-	    ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data magician_ohci_info = {
-	.port_mode    = PMM_PERPORT_MODE,
-	.init         = magician_ohci_init,
-	.power_budget = 0,
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+	.power_budget	= 0,
 };
 
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d44af76..f2c7ad8 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -162,8 +162,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
 		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
 		if (likely(pending)) {
 			irq = MAINSTONE_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		pending = MST_INTSETCLR & mainstone_irq_enabled;
 	} while (pending);
@@ -508,19 +507,9 @@ static struct platform_device *platform_devices[] __initdata = {
 	&mst_gpio_keys_device,
 };
 
-static int mainstone_ohci_init(struct device *dev)
-{
-	/* Set the Power Control Polarity Low and Power Sense
-	   Polarity Low to active low. */
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data mainstone_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= mainstone_ohci_init,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 925575f1..2061c00 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -25,7 +25,12 @@
 
 #include "generic.h"
 
-#define PGSR(x)		__REG2(0x40F00020, ((x) & 0x60) >> 3)
+#define gpio_to_bank(gpio)	((gpio) >> 5)
+
+#define PGSR(x)		__REG2(0x40F00020, (x) << 2)
+#define __GAFR(u, x)	__REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
+#define GAFR_L(x)	__GAFR(0, x)
+#define GAFR_U(x)	__GAFR(1, x)
 
 #define PWER_WE35	(1 << 24)
 
@@ -38,49 +43,59 @@ struct gpio_desc {
 };
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
+static int gpio_nr;
 
-static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
-{
-	unsigned mask = GPIO_bit(gpio);
-
-	/* low power state */
-	switch (lpm) {
-	case MFP_LPM_DRIVE_HIGH:
-		PGSR(gpio) |= mask;
-		break;
-	case MFP_LPM_DRIVE_LOW:
-		PGSR(gpio) &= ~mask;
-		break;
-	case MFP_LPM_INPUT:
-		break;
-	default:
-		pr_warning("%s: invalid low power state for GPIO%d\n",
-				__func__, gpio);
-		return -EINVAL;
-	}
-	return 0;
-}
+static unsigned long gpdr_lpm[4];
 
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
 	unsigned long gafr, mask = GPIO_bit(gpio);
-	int fn;
+	int bank = gpio_to_bank(gpio);
+	int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
+	int shft = (gpio & 0xf) << 1;
+	int fn = MFP_AF(c);
+	int dir = c & MFP_DIR_OUT;
 
-	fn = MFP_AF(c);
 	if (fn > 3)
 		return -EINVAL;
 
-	/* alternate function and direction */
-	gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2));
-	GAFR(gpio) = gafr |  (fn  << ((gpio & 0xf) * 2));
+	/* alternate function and direction at run-time */
+	gafr = (uorl == 0) ? GAFR_L(bank) : GAFR_U(bank);
+	gafr = (gafr & ~(0x3 << shft)) | (fn << shft);
 
-	if (c & MFP_DIR_OUT)
+	if (uorl == 0)
+		GAFR_L(bank) = gafr;
+	else
+		GAFR_U(bank) = gafr;
+
+	if (dir == MFP_DIR_OUT)
 		GPDR(gpio) |= mask;
 	else
 		GPDR(gpio) &= ~mask;
 
-	if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
-		return -EINVAL;
+	/* alternate function and direction at low power mode */
+	switch (c & MFP_LPM_STATE_MASK) {
+	case MFP_LPM_DRIVE_HIGH:
+		PGSR(bank) |= mask;
+		dir = MFP_DIR_OUT;
+		break;
+	case MFP_LPM_DRIVE_LOW:
+		PGSR(bank) &= ~mask;
+		dir = MFP_DIR_OUT;
+		break;
+	case MFP_LPM_DEFAULT:
+		break;
+	default:
+		/* warning and fall through, treat as MFP_LPM_DEFAULT */
+		pr_warning("%s: GPIO%d: unsupported low power mode\n",
+				__func__, gpio);
+		break;
+	}
+
+	if (dir == MFP_DIR_OUT)
+		gpdr_lpm[bank] |= mask;
+	else
+		gpdr_lpm[bank] &= ~mask;
 
 	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
 	 * configurations of those pins not able to wakeup
@@ -91,7 +106,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 		return -EINVAL;
 	}
 
-	if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) {
+	if ((c & MFP_LPM_CAN_WAKEUP) && (dir == MFP_DIR_OUT)) {
 		pr_warning("%s: output GPIO%d unable to wakeup\n",
 				__func__, gpio);
 		return -EINVAL;
@@ -135,7 +150,7 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
 void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
 {
-	unsigned long flags;
+	unsigned long flags, c;
 	int gpio;
 
 	gpio = __mfp_validate(mfp);
@@ -143,7 +158,11 @@ void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
 		return;
 
 	local_irq_save(flags);
-	__mfp_config_lpm(gpio, lpm);
+
+	c = gpio_desc[gpio].config;
+	c = (c & ~MFP_LPM_STATE_MASK) | lpm;
+	__mfp_config_gpio(gpio, c);
+
 	local_irq_restore(flags);
 }
 
@@ -187,23 +206,22 @@ int gpio_set_wake(unsigned int gpio, unsigned int on)
 }
 
 #ifdef CONFIG_PXA25x
-static int __init pxa25x_mfp_init(void)
+static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
-	if (cpu_is_pxa25x()) {
-		for (i = 0; i <= 84; i++)
-			gpio_desc[i].valid = 1;
+	for (i = 0; i <= 84; i++)
+		gpio_desc[i].valid = 1;
 
-		for (i = 0; i <= 15; i++) {
-			gpio_desc[i].can_wakeup = 1;
-			gpio_desc[i].mask = GPIO_bit(i);
-		}
+	for (i = 0; i <= 15; i++) {
+		gpio_desc[i].can_wakeup = 1;
+		gpio_desc[i].mask = GPIO_bit(i);
 	}
 
-	return 0;
+	gpio_nr = 85;
 }
-postcore_initcall(pxa25x_mfp_init);
+#else
+static inline void pxa25x_mfp_init(void) {}
 #endif /* CONFIG_PXA25x */
 
 #ifdef CONFIG_PXA27x
@@ -233,45 +251,106 @@ int keypad_set_wake(unsigned int on)
 	return 0;
 }
 
-static int __init pxa27x_mfp_init(void)
+static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
-	if (cpu_is_pxa27x()) {
-		for (i = 0; i <= 120; i++) {
-			/* skip GPIO2, 5, 6, 7, 8, they are not
-			 * valid pins allow configuration
-			 */
-			if (i == 2 || i == 5 || i == 6 ||
-			    i == 7 || i == 8)
-				continue;
+	for (i = 0; i <= 120; i++) {
+		/* skip GPIO2, 5, 6, 7, 8, they are not
+		 * valid pins allow configuration
+		 */
+		if (i == 2 || i == 5 || i == 6 || i == 7 || i == 8)
+			continue;
 
-			gpio_desc[i].valid = 1;
-		}
+		gpio_desc[i].valid = 1;
+	}
 
-		/* Keypad GPIOs */
-		for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
-			gpio = pxa27x_pkwr_gpio[i];
-			gpio_desc[gpio].can_wakeup = 1;
-			gpio_desc[gpio].keypad_gpio = 1;
-			gpio_desc[gpio].mask = 1 << i;
-		}
+	/* Keypad GPIOs */
+	for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
+		gpio = pxa27x_pkwr_gpio[i];
+		gpio_desc[gpio].can_wakeup = 1;
+		gpio_desc[gpio].keypad_gpio = 1;
+		gpio_desc[gpio].mask = 1 << i;
+	}
 
-		/* Overwrite GPIO13 as a PWER wakeup source */
-		for (i = 0; i <= 15; i++) {
-			/* skip GPIO2, 5, 6, 7, 8 */
-			if (GPIO_bit(i) & 0x1e4)
-				continue;
+	/* Overwrite GPIO13 as a PWER wakeup source */
+	for (i = 0; i <= 15; i++) {
+		/* skip GPIO2, 5, 6, 7, 8 */
+		if (GPIO_bit(i) & 0x1e4)
+			continue;
 
-			gpio_desc[i].can_wakeup = 1;
-			gpio_desc[i].mask = GPIO_bit(i);
-		}
+		gpio_desc[i].can_wakeup = 1;
+		gpio_desc[i].mask = GPIO_bit(i);
+	}
+
+	gpio_desc[35].can_wakeup = 1;
+	gpio_desc[35].mask = PWER_WE35;
+
+	gpio_nr = 121;
+}
+#else
+static inline void pxa27x_mfp_init(void) {}
+#endif /* CONFIG_PXA27x */
+
+#ifdef CONFIG_PM
+static unsigned long saved_gafr[2][4];
+static unsigned long saved_gpdr[4];
 
-		gpio_desc[35].can_wakeup = 1;
-		gpio_desc[35].mask = PWER_WE35;
+static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+{
+	int i;
+
+	for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+
+		saved_gafr[0][i] = GAFR_L(i);
+		saved_gafr[1][i] = GAFR_U(i);
+		saved_gpdr[i] = GPDR(i * 32);
+
+		GPDR(i * 32) = gpdr_lpm[i];
 	}
+	return 0;
+}
 
+static int pxa2xx_mfp_resume(struct sys_device *d)
+{
+	int i;
+
+	for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+		GAFR_L(i) = saved_gafr[0][i];
+		GAFR_U(i) = saved_gafr[1][i];
+		GPDR(i * 32) = saved_gpdr[i];
+	}
+	PSSR = PSSR_RDH | PSSR_PH;
 	return 0;
 }
-postcore_initcall(pxa27x_mfp_init);
-#endif /* CONFIG_PXA27x */
+#else
+#define pxa2xx_mfp_suspend	NULL
+#define pxa2xx_mfp_resume	NULL
+#endif
+
+struct sysdev_class pxa2xx_mfp_sysclass = {
+	.name		= "mfp",
+	.suspend	= pxa2xx_mfp_suspend,
+	.resume		= pxa2xx_mfp_resume,
+};
+
+static int __init pxa2xx_mfp_init(void)
+{
+	int i;
+
+	if (!cpu_is_pxa2xx())
+		return 0;
+
+	if (cpu_is_pxa25x())
+		pxa25x_mfp_init();
+
+	if (cpu_is_pxa27x())
+		pxa27x_mfp_init();
+
+	/* initialize gafr_run[], pgsr_lpm[] from existing values */
+	for (i = 0; i <= gpio_to_bank(gpio_nr); i++)
+		gpdr_lpm[i] = GPDR(i * 32);
+
+	return sysdev_class_register(&pxa2xx_mfp_sysclass);
+}
+postcore_initcall(pxa2xx_mfp_init);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
new file mode 100644
index 0000000..0842c53
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -0,0 +1,905 @@
+/*
+ * Handles the Mitac Mio A701 Board
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/gpio_keys.h>
+#include <linux/pwm_backlight.h>
+#include <linux/rtc.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxafb.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+
+#include <mach/mioa701.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long mioa701_pin_config[] = {
+	/* Mio global */
+	MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
+	MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
+	MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+
+	/* Backlight PWM 0 */
+	GPIO16_PWM0_OUT,
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
+	MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
+	MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
+
+	/* USB */
+	MIO_CFG_IN(GPIO13_USB_DETECT, AF0),
+	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* Bluetooth */
+	GPIO44_BTUART_CTS,
+	GPIO42_BTUART_RXD,
+	GPIO45_BTUART_RTS,
+	GPIO43_BTUART_TXD,
+	MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+
+	/* GPS */
+	MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* GSM */
+	MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
+	MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
+	MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	/* Sound */
+	GPIO89_AC97_SYSCLK,
+	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
+
+	/* Leds */
+	MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
+
+	/* Keyboard */
+	MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
+	MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
+	MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* Unknown */
+	MFP_CFG_IN(GPIO14, AF0),
+	MFP_CFG_IN(GPIO20, AF0),
+	MFP_CFG_IN(GPIO21, AF0),
+	MFP_CFG_IN(GPIO33, AF0),
+	MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
+	MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
+	MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
+	MFP_CFG_IN(GPIO80, AF0),
+	MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
+	MFP_CFG_IN(GPIO96, AF0),
+	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
+};
+
+#define MIO_GPIO_IN(num, _desc) \
+	{ .gpio = (num), .dir = 0, .desc = (_desc) }
+#define MIO_GPIO_OUT(num, _init, _desc) \
+	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+	unsigned gpio : 8;
+	unsigned dir : 1;
+	unsigned init : 1;
+	char *desc;
+};
+
+static int mio_gpio_request(struct gpio_ress *gpios, int size)
+{
+	int i, rc = 0;
+	int gpio;
+	int dir;
+
+	for (i = 0; (!rc) && (i < size); i++) {
+		gpio = gpios[i].gpio;
+		dir = gpios[i].dir;
+		rc = gpio_request(gpio, gpios[i].desc);
+		if (rc) {
+			printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n",
+			       gpio, gpios[i].desc, rc);
+			continue;
+		}
+		if (dir)
+			gpio_direction_output(gpio, gpios[i].init);
+		else
+			gpio_direction_input(gpio);
+	}
+	while ((rc) && (--i >= 0))
+		gpio_free(gpios[i].gpio);
+	return rc;
+}
+
+static void mio_gpio_free(struct gpio_ress *gpios, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		gpio_free(gpios[i].gpio);
+}
+
+/* LCD Screen and Backlight */
+static struct platform_pwm_backlight_data mioa701_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 100,
+	.dft_brightness	= 50,
+	.pwm_period_ns	= 4000 * 1024,	/* Fl = 250kHz */
+};
+
+/*
+ * LTM0305A776C LCD panel timings
+ *
+ * see:
+ *  - the LTM0305A776C datasheet,
+ *  - and the PXA27x Programmers' manual
+ */
+static struct pxafb_mode_info mioa701_ltm0305a776c = {
+	.pixclock		= 220000,	/* CLK=4.545 MHz */
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 4,
+	.vsync_len		= 2,
+	.left_margin		= 6,
+	.right_margin		= 4,
+	.upper_margin		= 5,
+	.lower_margin		= 3,
+};
+
+static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+	gpio_set_value(GPIO87_LCD_POWER, on);
+}
+
+static struct pxafb_mach_info mioa701_pxafb_info = {
+	.modes			= &mioa701_ltm0305a776c,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_lcd_power	= mioa701_lcd_power,
+};
+
+/*
+ * Keyboard configuration
+ */
+static unsigned int mioa701_matrix_keys[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_MEDIA),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_ENTER),
+	KEY(1, 2, KEY_CONNECT),	/* GPS key */
+	KEY(2, 0, KEY_LEFT),
+	KEY(2, 1, KEY_PHONE),	/* Phone Green key */
+	KEY(2, 2, KEY_CAMERA)	/* Camera key */
+};
+static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
+	.matrix_key_rows = 3,
+	.matrix_key_cols = 3,
+	.matrix_key_map = mioa701_matrix_keys,
+	.matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
+};
+
+/*
+ * GPIO Key Configuration
+ */
+#define MIO_KEY(key, _gpio, _desc, _wakeup) \
+	{ .code = (key), .gpio = (_gpio), .active_low = 0, \
+	.desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
+static struct gpio_keys_button mioa701_button_table[] = {
+	MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
+	MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
+	MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
+	MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
+};
+
+static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
+	.buttons  = mioa701_button_table,
+	.nbuttons = ARRAY_SIZE(mioa701_button_table),
+};
+
+/*
+ * Leds and vibrator
+ */
+#define ONE_LED(_gpio, _name) \
+{ .gpio = (_gpio), .name = (_name), .active_low = true }
+static struct gpio_led gpio_leds[] = {
+	ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
+	ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
+	ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
+	ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
+	ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds = gpio_leds,
+	.num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+/*
+ * GSM Sagem XS200 chip
+ *
+ * GSM handling was purged from kernel. For history, this is the way to go :
+ *   - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
+ *            GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
+ *   - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
+ *             GPIO24_GSM_MOD_RESET_CMD = 0
+ *   - turn on  : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
+ *                GPIO88_GSM_nMOD_ON_CMD = 1
+ *   - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
+ *                GPIO90_GSM_nMOD_OFF_CMD = 1
+ */
+static int is_gsm_on(void)
+{
+	int is_on;
+
+	is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
+	return is_on;
+}
+
+irqreturn_t gsm_on_irq(int irq, void *p)
+{
+	printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
+	       is_gsm_on() ? "on" : "off");
+	return IRQ_HANDLED;
+}
+
+struct gpio_ress gsm_gpios[] = {
+	MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"),
+	MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"),
+};
+
+static int __init gsm_init(void)
+{
+	int rc;
+
+	rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios));
+	if (rc)
+		goto err_gpio;
+	rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
+			 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			 "GSM XS200 Power Irq", NULL);
+	if (rc)
+		goto err_irq;
+
+	gpio_set_wake(GPIO113_GSM_EVENT, 1);
+	return 0;
+
+err_irq:
+	printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
+	mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+err_gpio:
+	printk(KERN_ERR "Mioa701: gsm not available\n");
+	return rc;
+}
+
+static void gsm_exit(void)
+{
+	free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
+	mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+}
+
+/*
+ * Bluetooth BRF6150 chip
+ *
+ * BT handling was purged from kernel. For history, this is the way to go :
+ * - turn on  : GPIO83_BT_ON = 1
+ * - turn off : GPIO83_BT_ON = 0
+ */
+
+/*
+ * GPS Sirf Star III chip
+ *
+ * GPS handling was purged from kernel. For history, this is the way to go :
+ * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ *          GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
+ * - turn on  : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
+ * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ */
+
+/*
+ * USB UDC
+ */
+static void udc_power_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		gpio_set_value(GPIO22_USB_ENABLE, 0);
+		break;
+	case PXA2XX_UDC_CMD_CONNECT:
+		gpio_set_value(GPIO22_USB_ENABLE, 1);
+		break;
+	default:
+		printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd);
+		break;
+	}
+}
+
+static int is_usb_connected(void)
+{
+	return !!gpio_get_value(GPIO13_USB_DETECT);
+}
+
+static struct pxa2xx_udc_mach_info mioa701_udc_info = {
+	.udc_is_connected = is_usb_connected,
+	.udc_command	  = udc_power_command,
+};
+
+struct gpio_ress udc_gpios[] = {
+	MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable")
+};
+
+static int __init udc_init(void)
+{
+	pxa_set_udc_info(&mioa701_udc_info);
+	return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios));
+}
+
+static void udc_exit(void)
+{
+	mio_gpio_free(ARRAY_AND_SIZE(udc_gpios));
+}
+
+/*
+ * SDIO/MMC Card controller
+ */
+static void mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask)
+		gpio_set_value(GPIO91_SDIO_EN, 1);	/* enable SDIO power */
+	else
+		gpio_set_value(GPIO91_SDIO_EN, 0);	/* disable SDIO power */
+}
+
+static int mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO78_SDIO_RO);
+}
+
+struct gpio_ress mci_gpios[] = {
+	MIO_GPIO_IN(GPIO78_SDIO_RO, 	"SDIO readonly detect"),
+	MIO_GPIO_IN(GPIO15_SDIO_INSERT,	"SDIO insertion detect"),
+	MIO_GPIO_OUT(GPIO91_SDIO_EN, 0,	"SDIO power enable")
+};
+
+static void mci_exit(struct device *dev, void *data)
+{
+	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
+	free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
+}
+
+static struct pxamci_platform_data mioa701_mci_info;
+
+/**
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
+{
+	int rc;
+	int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
+
+	rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
+	if (rc)
+		goto err_gpio;
+	/* enable RE/FE interrupt on card insertion and removal */
+	rc = request_irq(irq, detect_int,
+			 IRQF_DISABLED | IRQF_TRIGGER_RISING |
+			 IRQF_TRIGGER_FALLING,
+			 "MMC card detect", data);
+	if (rc)
+		goto err_irq;
+
+	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
+	return 0;
+
+err_irq:
+	dev_err(dev, "mioa701_mci_init: MMC/SD:"
+		" can't request MMC card detect IRQ\n");
+	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
+err_gpio:
+	return rc;
+}
+
+static struct pxamci_platform_data mioa701_mci_info = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init	  = mci_init,
+	.get_ro	  = mci_get_ro,
+	.setpower = mci_setpower,
+	.exit	  = mci_exit,
+};
+
+/* FlashRAM */
+static struct resource strataflash_resource = {
+	.start = PXA_CS0_PHYS,
+	.end   = PXA_CS0_PHYS + SZ_64M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+	.width = 2,
+	/* .set_vpp = mioa701_set_vpp, */
+};
+
+static struct platform_device strataflash = {
+	.name	       = "physmap-flash",
+	.id	       = -1,
+	.resource      = &strataflash_resource,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &strataflash_data,
+	},
+};
+
+/*
+ * Suspend/Resume bootstrap management
+ *
+ * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled,
+ * this sequence is as follows :
+ *   - disables interrupts
+ *   - initialize SDRAM (self refresh RAM into active RAM)
+ *   - initialize GPIOs (depends on value at 0xa020b020)
+ *   - initialize coprossessors
+ *   - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
+ *   - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
+ *   - else do a resume, ie. jump to addr 0xa0100000
+ */
+#define RESUME_ENABLE_ADDR	0xa020b000
+#define RESUME_ENABLE_VAL	0x0f0f0f0f
+#define RESUME_BT_ADDR		0xa020b020
+#define RESUME_UNKNOWN_ADDR	0xa020b024
+#define RESUME_VECTOR_ADDR	0xa0100000
+#define BOOTSTRAP_WORDS		mioa701_bootstrap_lg/4
+
+static u32 *save_buffer;
+
+static void install_bootstrap(void)
+{
+	int i;
+	u32 *rom_bootstrap  = phys_to_virt(RESUME_VECTOR_ADDR);
+	u32 *src = &mioa701_bootstrap;
+
+	for (i = 0; i < BOOTSTRAP_WORDS; i++)
+		rom_bootstrap[i] = src[i];
+}
+
+
+static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+	int i = 0, is_bt_on;
+	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
+	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
+	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+	/* Devices prepare suspend */
+	is_bt_on = gpio_get_value(GPIO83_BT_ON);
+	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
+			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
+
+	for (i = 0; i < BOOTSTRAP_WORDS; i++)
+		save_buffer[i] = mem_resume_vector[i];
+	save_buffer[i++] = *mem_resume_enabler;
+	save_buffer[i++] = *mem_resume_bt;
+	save_buffer[i++] = *mem_resume_unknown;
+
+	*mem_resume_enabler = RESUME_ENABLE_VAL;
+	*mem_resume_bt	    = is_bt_on;
+
+	install_bootstrap();
+	return 0;
+}
+
+static int mioa701_sys_resume(struct sys_device *sysdev)
+{
+	int i = 0;
+	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
+	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
+	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+	for (i = 0; i < BOOTSTRAP_WORDS; i++)
+		mem_resume_vector[i] = save_buffer[i];
+	*mem_resume_enabler = save_buffer[i++];
+	*mem_resume_bt	    = save_buffer[i++];
+	*mem_resume_unknown = save_buffer[i++];
+
+	return 0;
+}
+
+static struct sysdev_class mioa701_sysclass = {
+	.name = "mioa701",
+};
+
+static struct sys_device sysdev_bootstrap = {
+	.cls		= &mioa701_sysclass,
+};
+
+static struct sysdev_driver driver_bootstrap = {
+	.suspend	= &mioa701_sys_suspend,
+	.resume		= &mioa701_sys_resume,
+};
+
+static int __init bootstrap_init(void)
+{
+	int rc;
+	int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
+
+	rc = sysdev_class_register(&mioa701_sysclass);
+	if (rc) {
+		printk(KERN_ERR "Failed registering mioa701 sys class\n");
+		return -ENODEV;
+	}
+	rc = sysdev_register(&sysdev_bootstrap);
+	if (rc) {
+		printk(KERN_ERR "Failed registering mioa701 sys device\n");
+		return -ENODEV;
+	}
+	rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap);
+	if (rc) {
+		printk(KERN_ERR "Failed registering PMU sys driver\n");
+		return -ENODEV;
+	}
+
+	save_buffer = kmalloc(save_size, GFP_KERNEL);
+	if (!save_buffer)
+		return -ENOMEM;
+	printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
+	       save_size);
+	return 0;
+}
+
+static void bootstrap_exit(void)
+{
+	kfree(save_buffer);
+	sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap);
+	sysdev_unregister(&sysdev_bootstrap);
+	sysdev_class_unregister(&mioa701_sysclass);
+
+	printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
+	       "resume !!!\n");
+}
+
+/*
+ * Power Supply
+ */
+static char *supplicants[] = {
+	"mioa701_battery"
+};
+
+static void mioa701_set_charge(int flags)
+{
+	gpio_set_value(GPIO9_CHARGE_nEN, !flags);
+}
+
+static struct pda_power_pdata power_pdata = {
+	.is_ac_online	= is_usb_connected,
+	.set_charge = mioa701_set_charge,
+	.supplied_to = supplicants,
+	.num_supplicants = ARRAY_SIZE(supplicants),
+};
+
+static struct resource power_resources[] = {
+	[0] = {
+		.name	= "ac",
+		.start	= gpio_to_irq(GPIO13_USB_DETECT),
+		.end	= gpio_to_irq(GPIO13_USB_DETECT),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device power_dev = {
+	.name		= "pda-power",
+	.id		= -1,
+	.resource	= power_resources,
+	.num_resources	= ARRAY_SIZE(power_resources),
+	.dev = {
+		.platform_data	= &power_pdata,
+	},
+};
+
+#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX)
+static struct wm97xx *battery_wm;
+
+static enum power_supply_property battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,	/* Necessary for apm */
+};
+
+static int get_battery_voltage(void)
+{
+	int adc = -1;
+
+	if (battery_wm)
+		adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1);
+	return adc;
+}
+
+static int get_battery_status(struct power_supply *b)
+{
+	int status;
+
+	if (is_usb_connected())
+		status = POWER_SUPPLY_STATUS_CHARGING;
+	else
+		status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+	return status;
+}
+
+static int get_property(struct power_supply *b,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	int rc = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = get_battery_status(b);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = 0xfd0;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = 0xc00;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = get_battery_voltage();
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = 100;
+		break;
+	default:
+		val->intval = -1;
+		rc = -1;
+	}
+
+	return rc;
+};
+
+static struct power_supply battery_ps = {
+	.name = "mioa701_battery",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.get_property = get_property,
+	.properties = battery_props,
+	.num_properties = ARRAY_SIZE(battery_props),
+};
+
+static int battery_probe(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+	int rc;
+
+	battery_wm = wm;
+
+	rc = power_supply_register(NULL, &battery_ps);
+	if (rc)
+		dev_err(&pdev->dev,
+		"Could not register mioa701 battery -> %d\n", rc);
+	return rc;
+}
+
+static int battery_remove(struct platform_device *pdev)
+{
+	battery_wm = NULL;
+	return 0;
+}
+
+static struct platform_driver mioa701_battery_driver = {
+	.driver = {
+		.name = "wm97xx-battery",
+	},
+	.probe = battery_probe,
+	.remove = battery_remove
+};
+
+static int __init mioa701_battery_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&mioa701_battery_driver);
+	if (rc)
+		printk(KERN_ERR "Could not register mioa701 battery driver\n");
+	return rc;
+}
+
+#else
+static int __init mioa701_battery_init(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Mio global
+ */
+
+/* Devices */
+#define MIO_PARENT_DEV(var, strname, tparent, pdata)	\
+static struct platform_device var = {			\
+	.name		= strname,			\
+	.id		= -1,				\
+	.dev		= {				\
+		.platform_data = pdata,			\
+		.parent	= tparent,			\
+	},						\
+};
+#define MIO_SIMPLE_DEV(var, strname, pdata)	\
+	MIO_PARENT_DEV(var, strname, NULL, pdata)
+
+MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys",	    &mioa701_gpio_keys_data)
+MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
+		&mioa701_backlight_data);
+MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
+MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
+MIO_SIMPLE_DEV(pxa2xx_ac97,	  "pxa2xx-ac97",    NULL)
+MIO_PARENT_DEV(mio_wm9713_codec,  "wm9713-codec",   &pxa2xx_ac97.dev, NULL)
+MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
+MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
+
+static struct platform_device *devices[] __initdata = {
+	&mioa701_gpio_keys,
+	&mioa701_backlight,
+	&mioa701_led,
+	&pxa2xx_pcm,
+	&pxa2xx_ac97,
+	&mio_wm9713_codec,
+	&mioa701_sound,
+	&power_dev,
+	&strataflash,
+	&mioa701_board
+};
+
+static void mioa701_machine_exit(void);
+
+static void mioa701_poweroff(void)
+{
+	mioa701_machine_exit();
+	gpio_set_value(GPIO18_POWEROFF, 1);
+}
+
+static void mioa701_restart(char c)
+{
+	mioa701_machine_exit();
+	arm_machine_restart(c);
+}
+
+struct gpio_ress global_gpios[] = {
+	MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"),
+	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
+	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+};
+
+static void __init mioa701_machine_init(void)
+{
+	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
+	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
+	RTTR = 32768 - 1; /* Reset crazy WinCE value */
+	UP2OCR = UP2OCR_HXOE;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
+	bootstrap_init();
+	set_pxa_fb_info(&mioa701_pxafb_info);
+	pxa_set_mci_info(&mioa701_mci_info);
+	pxa_set_keypad_info(&mioa701_keypad_info);
+	udc_init();
+	pm_power_off = mioa701_poweroff;
+	arm_pm_restart = mioa701_restart;
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	gsm_init();
+	mioa701_battery_init();
+}
+
+static void mioa701_machine_exit(void)
+{
+	udc_exit();
+	bootstrap_exit();
+	gsm_exit();
+}
+
+MACHINE_START(MIOA701, "MIO A701")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= &pxa_map_io,
+	.init_irq	= &pxa27x_init_irq,
+	.init_machine	= mioa701_machine_init,
+	.timer		= &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
new file mode 100644
index 0000000..a647693
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -0,0 +1,36 @@
+/* Bootloader to resume MIO A701
+ *
+ * 2007-1-12 Robert Jarzmik
+ *
+ * This code is licenced under the GPLv2.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ *       This is to allow jumpaddr to be accessed with a relative load
+ *       while we can't rely on any MMU translation.  We could have put
+ *       sleep_save_sp in the .text section as well, but some setups might
+ *       insist on it to be truly read-only.
+ */
+	.data
+ENTRY(mioa701_bootstrap)
+0:
+	b	1f
+ENTRY(mioa701_jumpaddr)
+	.word	0x40f00008		@ PSPR in no-MMU mode
+1:
+	mov	r0,     #0xa0000000	@ Don't suppose memory access works
+	orr	r0, r0, #0x00200000	@ even if it's supposed to
+	mov	r1, #0
+	str	r1, [r0]		@ Early disable resume for next boot
+	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
+	ldr	r0, [r0]
+	mov	pc, r0
+2:
+
+ENTRY(mioa701_bootstrap_lg)
+	.data
+	.word	2b-0b
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
new file mode 100644
index 0000000..8a73814
--- /dev/null
+++ b/arch/arm/mach-pxa/mp900.c
@@ -0,0 +1,100 @@
+/*
+ *  linux/arch/arm/mach-pxa/mp900.c
+ *
+ *  Support for the NEC MobilePro900/C platform
+ *
+ *  Based on mach-pxa/gumstix.c
+ *
+ *  2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
+ *  2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/usb/isp116x.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "generic.h"
+
+static void isp116x_pfm_delay(struct device *dev, int delay)
+{
+
+	/* 400Mhz PXA2 = 2.5ns / instruction */
+
+	int cyc = delay / 10;
+
+	/* 4 Instructions = 4 x 2.5ns = 10ns */
+	__asm__ volatile ("0:\n"
+		"subs %0, %1, #1\n"
+		"bge 0b\n"
+		:"=r" (cyc)
+		:"0"(cyc)
+	);
+}
+
+static struct isp116x_platform_data isp116x_pfm_data = {
+	.remote_wakeup_enable = 1,
+	.delay = isp116x_pfm_delay,
+};
+
+static struct resource isp116x_pfm_resources[] = {
+	[0] =	{
+		.start	= 0x0d000000,
+		.end	= 0x0d000000 + 1,
+		.flags	= IORESOURCE_MEM,
+		},
+	[1] =	{
+		.start  = 0x0d000000 + 4,
+		.end	= 0x0d000000 + 5,
+		.flags  = IORESOURCE_MEM,
+		},
+	[2] =	{
+		.start	= 61,
+		.end	= 61,
+		.flags	= IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device mp900c_dummy_device = {
+	.name		= "mp900c_dummy",
+	.id		= -1,
+};
+
+static struct platform_device mp900c_usb = {
+	.name		= "isp116x-hcd",
+	.num_resources	= ARRAY_SIZE(isp116x_pfm_resources),
+	.resource	= isp116x_pfm_resources,
+	.dev.platform_data = &isp116x_pfm_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mp900c_dummy_device,
+	&mp900c_usb,
+};
+
+static void __init mp900c_init(void)
+{
+	printk(KERN_INFO "MobilePro 900/C machine init\n");
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
+MACHINE_START(NEC_MP900, "MobilePro900/C")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0220100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.timer		= &pxa_timer,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.init_machine	= mp900c_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fe924a2..4447711 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -25,6 +25,8 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -340,6 +342,23 @@ static struct platform_device power_supply = {
 };
 
 /******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.max_voltage	= PALMTX_BAT_MAX_VOLTAGE,
+	.min_voltage	= PALMTX_BAT_MIN_VOLTAGE,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmtx_lcd_modes[] = {
@@ -401,6 +420,7 @@ static void __init palmtx_init(void)
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
new file mode 100644
index 0000000..2f730da
--- /dev/null
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -0,0 +1,554 @@
+/*
+ * Hardware definitions for Palm Zire72
+ *
+ * Authors:
+ *	Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
+ *	Sergey Lapin <slapin@ossfans.org>
+ *	Alex Osborne <bobofdoom@gmail.com>
+ *	Jan Herman <2hp@seznam.cz>
+ *
+ * Rewrite for mainline:
+ *	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmz72.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/pm.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmz72_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO115_GPIO,	/* SD RO */
+	GPIO98_GPIO,	/* SD power */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO49_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO15_GPIO,	/* usb detect */
+	GPIO12_GPIO,	/* usb pullup */
+	GPIO95_GPIO,	/* usb power */
+
+	/* Matrix keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO20_GPIO,	/* bl power */
+	GPIO21_GPIO,	/* LCD border switch */
+	GPIO22_GPIO,	/* LCD border color */
+	GPIO96_GPIO,	/* lcd power */
+
+	/* Misc. */
+	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
+	GPIO88_GPIO,				/* green led */
+	GPIO27_GPIO,				/* WM9712 IRQ */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmz72_mci_init(struct device *dev,
+				irq_handler_t palmz72_detect_int, void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
+			palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		goto err2;
+	}
+
+	/* SD_POWER is not actually power, but it is more like chip
+	 * select, i.e. it is inverted */
+
+	err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
+	if (err)
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+	if (err)
+		goto err4;
+	err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
+	if (err)
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
+	if (err)
+		goto err5;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMZ72_SD_RO);
+err4:
+	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+err:
+	return err;
+}
+
+static void palmz72_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+	gpio_free(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static void palmz72_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	if (p_d->ocr_mask & (1 << vdd))
+		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+	else
+		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
+}
+
+static int palmz72_mci_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static struct pxamci_platform_data palmz72_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmz72_mci_power,
+	.get_ro		= palmz72_mci_ro,
+	.init 		= palmz72_mci_init,
+	.exit		= palmz72_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmz72_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmz72_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmz72_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmz72_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
+	if (ret)
+		goto err2;
+	ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmz72_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmz72_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmz72_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMZ72_MAX_INTENSITY,
+	.dft_brightness	= PALMZ72_MAX_INTENSITY,
+	.pwm_period_ns	= PALMZ72_PERIOD_NS,
+	.init		= palmz72_backlight_init,
+	.notify		= palmz72_backlight_notify,
+	.exit		= palmz72_backlight_exit,
+};
+
+static struct platform_device palmz72_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmz72_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmz72_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmz72_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+}
+
+static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmz72_ficp_platform_data = {
+	.startup		= palmz72_irda_startup,
+	.shutdown		= palmz72_irda_shutdown,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= palmz72_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "palmz72:green:led",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_PALMZ72_LED_GREEN,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmz72_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	}
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+err1:
+	return ret;
+}
+
+static int palmz72_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static int palmz72_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static char *palmz72_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmz72_is_ac_online,
+	.is_usb_online   = palmz72_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmz72_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmz72_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmz72_lcd_modes[] = {
+{
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmz72_lcd_screen = {
+	.modes		= palmz72_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmz72_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+#ifdef CONFIG_PM
+
+/* We have some black magic here
+ * PalmOS ROM on recover expects special struct physical address
+ * to be transferred via PSPR. Using this struct PalmOS restores
+ * its state after sleep. As for Linux, we need to setup it the
+ * same way. More than that, PalmOS ROM changes some values in memory.
+ * For now only one location is found, which needs special treatment.
+ * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
+ * for reading backtraces for me :)
+ */
+
+#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
+
+static struct palmz72_resume_info palmz72_resume_info = {
+	.magic0 = 0xb4e6,
+	.magic1 = 1,
+
+	/* reset state, MMU off etc */
+	.arm_control = 0,
+	.aux_control = 0,
+	.ttb = 0,
+	.domain_access = 0,
+	.process_id = 0,
+};
+
+static unsigned long store_ptr;
+
+/* sys_device for Palm Zire 72 PM */
+
+static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
+{
+	/* setup the resume_info struct for the original bootloader */
+	palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume;
+
+	/* Storing memory touched by ROM */
+	store_ptr = *PALMZ72_SAVE_DWORD;
+
+	/* Setting PSPR to a proper value */
+	PSPR = virt_to_phys(&palmz72_resume_info);
+
+	return 0;
+}
+
+static int palmz72_pm_resume(struct sys_device *dev)
+{
+	*PALMZ72_SAVE_DWORD = store_ptr;
+	return 0;
+}
+
+static struct sysdev_class palmz72_pm_sysclass = {
+	.name = "palmz72_pm",
+	.suspend = palmz72_pm_suspend,
+	.resume = palmz72_pm_resume,
+};
+
+static struct sys_device palmz72_pm_device = {
+	.cls = &palmz72_pm_sysclass,
+};
+
+static int __init palmz72_pm_init(void)
+{
+	int ret = -ENODEV;
+	if (machine_is_palmz72()) {
+		ret = sysdev_class_register(&palmz72_pm_sysclass);
+		if (ret == 0)
+			ret = sysdev_register(&palmz72_pm_device);
+	}
+	return ret;
+}
+
+device_initcall(palmz72_pm_init);
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+	&palmz72_backlight,
+	&palmz72_leds,
+	&power_supply,
+};
+
+static void __init palmz72_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+	set_pxa_fb_info(&palmz72_lcd_screen);
+	pxa_set_mci_info(&palmz72_mci_platform_data);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmz72_ficp_platform_data);
+	pxa_set_keypad_info(&palmz72_keypad_platform_data);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMZ72, "Palm Zire72")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmz72_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 730b9f6..36135a0 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -31,7 +31,7 @@
 #include <asm/mach/arch.h>
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/pcm027.h>
@@ -86,6 +86,28 @@
  * *) CPU internal use only
  */
 
+static unsigned long pcm027_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO20_nSDCS_2,
+	GPIO21_nSDCS_3,
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,	/* Ethernet */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* GPIO */
+	GPIO52_GPIO,	/* IRQ from network controller */
+#ifdef CONFIG_LEDS_GPIO
+	GPIO90_GPIO,	/* PCM027_LED_CPU */
+	GPIO91_GPIO,	/* PCM027_LED_HEART_BEAT */
+#endif
+	GPIO114_GPIO,	/* IRQ from CAN controller */
+};
+
 /*
  * SMC91x network controller specific stuff
  */
@@ -206,13 +228,9 @@ static void __init pcm027_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
 
-	/* LEDs (on demand only) */
-#ifdef CONFIG_LEDS_GPIO
-	pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT);
-	pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT);
-#endif /* CONFIG_LEDS_GPIO */
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* at last call the baseboard to initialize itself */
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 420c9b3..f601425 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -262,8 +262,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 					GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
 		if (likely(pending)) {
 			irq = PCM027_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
 	} while (pending);
@@ -328,36 +327,10 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
 	.exit		= pcm990_mci_exit,
 };
 
-/*
- * init OHCI hardware to work with
- *
- * Note: Only USB port 1 (host only) is connected
- *
- * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low
- * GPIO89 (USBHPEN#1): power-on out, on when low
- */
-static int pcm990_ohci_init(struct device *dev)
-{
-	/*
-	 * disable USB port 2 and 3
-	 * power sense is active low
-	 */
-	UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 |
-				UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE);
-	/*
-	 * wait 10ms after Power on
-	 * overcurrent per port
-	 * power switch per port
-	 */
-	UHCRHDA = (5<<24) | (1<<11) | (1<<8);	/* FIXME: Required? */
-
-	return 0;
-}
-
 static struct pxaohci_platform_data pcm990_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= pcm990_ohci_init,
-	.exit		= NULL,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.power_on_delay	= 10,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 1b539e6..164eb0b 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -86,9 +86,27 @@ static int pxa_pm_valid(suspend_state_t state)
 	return -EINVAL;
 }
 
+static int pxa_pm_prepare(void)
+{
+	int ret = 0;
+
+	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->prepare)
+		ret = pxa_cpu_pm_fns->prepare();
+
+	return ret;
+}
+
+static void pxa_pm_finish(void)
+{
+	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
+		pxa_cpu_pm_fns->finish();
+}
+
 static struct platform_suspend_ops pxa_pm_ops = {
 	.valid		= pxa_pm_valid,
 	.enter		= pxa_pm_enter,
+	.prepare	= pxa_pm_prepare,
+	.finish		= pxa_pm_finish,
 };
 
 static int __init pxa_pm_init(void)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 3f5f484..2e3bd8b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -20,6 +20,9 @@
 #include <linux/fb.h>
 #include <linux/pm.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -33,7 +36,7 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/i2c.h>
@@ -42,6 +45,7 @@
 #include <mach/pxafb.h>
 #include <mach/sharpsl.h>
 #include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -51,6 +55,88 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long poodle_pin_config[] __initdata = {
+	/* I/O */
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO18_RDY,
+
+	/* Clock */
+	GPIO12_32KHz,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,	/* POODLE_GPIO_TP_CS - SFRM as chip select */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
+
+	/* Infra-Red */
+	GPIO47_FICP_TXD,
+	GPIO46_FICP_RXD,
+
+	/* FFUART */
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+	GPIO39_FFUART_TXD,
+	GPIO37_FFUART_DSR,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* GPIO */
+	GPIO9_GPIO,	/* POODLE_GPIO_nSD_DETECT */
+	GPIO7_GPIO,	/* POODLE_GPIO_nSD_WP */
+	GPIO3_GPIO,	/* POODLE_GPIO_SD_PWR */
+	GPIO33_GPIO,	/* POODLE_GPIO_SD_PWR1 */
+
+	GPIO20_GPIO,	/* POODLE_GPIO_USB_PULLUP */
+	GPIO22_GPIO,	/* POODLE_GPIO_IR_ON */
+};
+
 static struct resource poodle_scoop_resources[] = {
 	[0] = {
 		.start		= 0x10800000,
@@ -62,6 +148,7 @@ static struct resource poodle_scoop_resources[] = {
 static struct scoop_config poodle_scoop_setup = {
 	.io_dir		= POODLE_SCOOP_IO_DIR,
 	.io_out		= POODLE_SCOOP_IO_OUT,
+	.gpio_base	= POODLE_SCOOP_GPIO_BASE,
 };
 
 struct platform_device poodle_scoop_device = {
@@ -74,27 +161,6 @@ struct platform_device poodle_scoop_device = {
 	.resource	= poodle_scoop_resources,
 };
 
-static void poodle_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
 static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
 {
 	.dev        = &poodle_scoop_device.dev,
@@ -107,7 +173,6 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config poodle_pcmcia_config = {
 	.devs         = &poodle_pcmcia_scoop[0],
 	.num_devs     = 1,
-	.pcmcia_init  = poodle_pcmcia_init,
 };
 
 EXPORT_SYMBOL(poodle_scoop_device);
@@ -136,62 +201,55 @@ struct platform_device poodle_locomo_device = {
 
 EXPORT_SYMBOL(poodle_locomo_device);
 
-/*
- * Poodle SSP Device
- */
-
-struct platform_device poodle_ssp_device = {
-	.name		= "corgi-ssp",
-	.id		= -1,
-};
-
-struct corgissp_machinfo poodle_ssp_machinfo = {
-	.port		= 1,
-	.cs_lcdcon	= -1,
-	.cs_ads7846	= -1,
-	.cs_max1111	= -1,
-	.clk_lcdcon	= 2,
-	.clk_ads7846	= 36,
-	.clk_max1111	= 2,
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master poodle_spi_info = {
+	.num_chipselect	= 1,
 };
 
-
-/*
- * Poodle Touch Screen Device
- */
-static struct resource poodlets_resources[] = {
-	[0] = {
-		.start		= POODLE_IRQ_GPIO_TP_INT,
-		.end		= POODLE_IRQ_GPIO_TP_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
+static struct ads7846_platform_data poodle_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= POODLE_GPIO_TP_INT,
 };
 
-static unsigned long poodle_get_hsync_invperiod(void)
+static void ads7846_cs(u32 command)
 {
-	return 0;
+	gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static void poodle_null_hsync(void)
-{
-}
-
-static struct corgits_machinfo  poodle_ts_machinfo = {
-	.get_hsync_invperiod	= poodle_get_hsync_invperiod,
-	.put_hsync       	= poodle_null_hsync,
-	.wait_hsync      	= poodle_null_hsync,
+static struct pxa2xx_spi_chip poodle_ads7846_chip = {
+	.cs_control		= ads7846_cs,
 };
 
-static struct platform_device poodle_ts_device = {
-	.name		= "corgi-ts",
-	.dev		= {
-		.platform_data	= &poodle_ts_machinfo,
+static struct spi_board_info poodle_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 10000,
+		.bus_num	= 1,
+		.platform_data	= &poodle_ads7846_info,
+		.controller_data= &poodle_ads7846_chip,
+		.irq		= gpio_to_irq(POODLE_GPIO_TP_INT),
 	},
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(poodlets_resources),
-	.resource	= poodlets_resources,
 };
 
+static void __init poodle_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
+	if (err)
+		return;
+
+	gpio_direction_output(POODLE_GPIO_TP_CS, 1);
+
+	pxa2xx_set_spi_info(1, &poodle_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
+}
+#else
+static inline void poodle_init_spi(void) {}
+#endif
 
 /*
  * MMC/SD Device
@@ -205,22 +263,50 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int,
 {
 	int err;
 
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-	pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN);
-	pxa_gpio_mode(POODLE_GPIO_nSD_WP | GPIO_IN);
-	pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT);
-	pxa_gpio_mode(POODLE_GPIO_SD_PWR1 | GPIO_OUT);
+	err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
+	if (err)
+		goto err_out;
+
+	err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
+	if (err)
+		goto err_free_1;
+
+	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
+	if (err)
+		goto err_free_2;
+
+	err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
+	if (err)
+		goto err_free_3;
+
+	gpio_direction_input(POODLE_GPIO_nSD_DETECT);
+	gpio_direction_input(POODLE_GPIO_nSD_WP);
+
+	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
+	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
 
 	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
 	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+	if (err) {
+		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+				__func__);
+		goto err_free_4;
+	}
+
+	return 0;
 
+err_free_4:
+	gpio_free(POODLE_GPIO_SD_PWR1);
+err_free_3:
+	gpio_free(POODLE_GPIO_SD_PWR);
+err_free_2:
+	gpio_free(POODLE_GPIO_nSD_WP);
+err_free_1:
+	gpio_free(POODLE_GPIO_nSD_DETECT);
+err_out:
 	return err;
 }
 
@@ -228,18 +314,19 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+	if ((1 << vdd) & p_d->ocr_mask) {
+		gpio_set_value(POODLE_GPIO_SD_PWR, 1);
 		mdelay(2);
-		GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
+		gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
 	} else {
-		GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
-		GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
+		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
 	}
 }
 
 static int poodle_mci_get_ro(struct device *dev)
 {
+	return !!gpio_get_value(POODLE_GPIO_nSD_WP);
 	return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
 }
 
@@ -247,6 +334,10 @@ static int poodle_mci_get_ro(struct device *dev)
 static void poodle_mci_exit(struct device *dev, void *data)
 {
 	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(POODLE_GPIO_SD_PWR1);
+	gpio_free(POODLE_GPIO_SD_PWR);
+	gpio_free(POODLE_GPIO_nSD_WP);
+	gpio_free(POODLE_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data poodle_mci_platform_data = {
@@ -263,38 +354,41 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
  */
 static void poodle_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF) {
-		GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
-	} else {
-		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
-	}
+	gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
 	pxa2xx_transceiver_mode(dev, mode);
 }
 
+static int poodle_irda_startup(struct device *dev)
+{
+	int err;
+
+	err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
+	if (err)
+		return err;
+
+	gpio_direction_output(POODLE_GPIO_IR_ON, 1);
+	return 0;
+}
+
+static void poodle_irda_shutdown(struct device *dev)
+{
+	gpio_free(POODLE_GPIO_IR_ON);
+}
+
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = poodle_irda_transceiver_mode,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= poodle_irda_transceiver_mode,
+	.startup		= poodle_irda_startup,
+	.shutdown		= poodle_irda_shutdown,
 };
 
 
 /*
  * USB Device Controller
  */
-static void poodle_udc_command(int cmd)
-{
-	switch(cmd)	{
-	case PXA2XX_UDC_CMD_CONNECT:
-		GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
-		break;
-	}
-}
-
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	/* no connect GPIO; poodle can't tell connection status */
-	.udc_command		= poodle_udc_command,
+	.gpio_pullup	= POODLE_GPIO_USB_PULLUP,
 };
 
 
@@ -316,15 +410,12 @@ static struct pxafb_mode_info poodle_fb_mode = {
 static struct pxafb_mach_info poodle_fb_info = {
 	.modes		= &poodle_fb_mode,
 	.num_modes	= 1,
-	.lccr0		= LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
-	.lccr3		= 0,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&poodle_locomo_device,
 	&poodle_scoop_device,
-	&poodle_ssp_device,
-	&poodle_ts_device,
 };
 
 static void poodle_poweroff(void)
@@ -344,59 +435,23 @@ static void __init poodle_init(void)
 	pm_power_off = poodle_poweroff;
 	arm_pm_restart = poodle_restart;
 
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x00008000;
-	PGSR1 = 0x003F0202;
-	PGSR2 = 0x0001C000;
 	PCFR |= PCFR_OPDE;
 
-	/* cpu initialize */
-	/* Pgsr Register */
-  	PGSR0 = 0x0146dd80;
-  	PGSR1 = 0x03bf0890;
-  	PGSR2 = 0x0001c000;
-
-	/* Alternate Register */
-  	GAFR0_L = 0x01001000;
-  	GAFR0_U = 0x591a8010;
-  	GAFR1_L = 0x900a8451;
-  	GAFR1_U = 0xaaa5aaaa;
-  	GAFR2_L = 0x8aaaaaaa;
-  	GAFR2_U = 0x00000002;
-
-	/* Direction Register */
-  	GPDR0 = 0xd3f0904c;
-  	GPDR1 = 0xfcffb7d3;
-  	GPDR2 = 0x0001ffff;
-
-	/* Output Register */
-  	GPCR0 = 0x00000000;
-  	GPCR1 = 0x00000000;
-  	GPCR2 = 0x00000000;
-
-  	GPSR0 = 0x00400000;
-  	GPSR1 = 0x00000000;
-        GPSR2 = 0x00000000;
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
+
+	platform_scoop_config = &poodle_pcmcia_config;
+
+	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+	if (ret)
+		pr_warning("poodle: Unable to register LoCoMo device\n");
 
 	set_pxa_fb_parent(&poodle_locomo_device.dev);
 	set_pxa_fb_info(&poodle_fb_info);
-	pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
-	pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
-
-	platform_scoop_config = &poodle_pcmcia_config;
-
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if (ret) {
-		printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n");
-	}
-	corgi_ssp_set_machinfo(&poodle_ssp_machinfo);
+	poodle_init_spi();
 }
 
 static void __init fixup_poodle(struct machine_desc *desc,
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index 316cd98..74e2ead 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -60,7 +60,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	do_div(c, 1000000000);
 	period_cycles = c;
 
-	if (period_cycles < 0)
+	if (period_cycles < 1)
 		period_cycles = 1;
 	prescale = (period_cycles - 1) / 1024;
 	pv = period_cycles / (prescale + 1) - 1;
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 305452b..25d17a1 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -36,6 +36,12 @@
 #include "devices.h"
 #include "clock.h"
 
+int cpu_is_pxa26x(void)
+{
+	return cpu_is_pxa250() && ((BOOT_DEF & 0x8) == 0);
+}
+EXPORT_SYMBOL_GPL(cpu_is_pxa26x);
+
 /*
  * Various clock factors driven by the CCCR register.
  */
@@ -203,48 +209,21 @@ static struct clk pxa25x_clks[] = {
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
-enum {	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
-
-	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
-	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
-	SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
-
+enum {
 	SLEEP_SAVE_PSTR,
-
 	SLEEP_SAVE_CKEN,
-
 	SLEEP_SAVE_COUNT
 };
 
 
 static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
-
-	SAVE(GAFR0_L); SAVE(GAFR0_U);
-	SAVE(GAFR1_L); SAVE(GAFR1_U);
-	SAVE(GAFR2_L); SAVE(GAFR2_U);
-
 	SAVE(CKEN);
 	SAVE(PSTR);
-
-	/* Clear GPIO transition detect bits */
-	GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
 }
 
 static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-
-	/* restore registers */
-	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
-	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
-	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
-
-	PSSR = PSSR_RDH | PSSR_PH;
-
 	RESTORE(CKEN);
 	RESTORE(PSTR);
 }
@@ -256,19 +235,32 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
 
 	switch (state) {
 	case PM_SUSPEND_MEM:
-		/* set resume return address */
-		PSPR = virt_to_phys(pxa_cpu_resume);
 		pxa25x_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
 }
 
+static int pxa25x_cpu_pm_prepare(void)
+{
+	/* set resume return address */
+	PSPR = virt_to_phys(pxa_cpu_resume);
+	return 0;
+}
+
+static void pxa25x_cpu_pm_finish(void)
+{
+	/* ensure not to come back here if it wasn't intended */
+	PSPR = 0;
+}
+
 static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
 	.save_count	= SLEEP_SAVE_COUNT,
 	.valid		= suspend_valid_only_mem,
 	.save		= pxa25x_cpu_pm_save,
 	.restore	= pxa25x_cpu_pm_restore,
 	.enter		= pxa25x_cpu_pm_enter,
+	.prepare	= pxa25x_cpu_pm_prepare,
+	.finish		= pxa25x_cpu_pm_finish,
 };
 
 static void __init pxa25x_init_pm(void)
@@ -330,6 +322,8 @@ static struct sys_device pxa25x_sysdev[] = {
 	{
 		.cls	= &pxa_irq_sysclass,
 	}, {
+		.cls	= &pxa2xx_mfp_sysclass,
+	}, {
 		.cls	= &pxa_gpio_sysclass,
 	},
 };
@@ -338,11 +332,7 @@ static int __init pxa25x_init(void)
 {
 	int i, ret = 0;
 
-	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa255())
-		clks_register(&pxa25x_hwuart_clk, 1);
-
-	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+	if (cpu_is_pxa25x()) {
 
 		reset_status = RCSR;
 
@@ -365,9 +355,11 @@ static int __init pxa25x_init(void)
 			return ret;
 	}
 
-	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa255())
+	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
+	if (cpu_is_pxa255() || cpu_is_pxa26x()) {
+		clks_register(&pxa25x_hwuart_clk, 1);
 		ret = platform_device_register(&pxa_device_hwuart);
+	}
 
 	return ret;
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index f9f6a9c..3e4ab22 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -34,6 +34,13 @@
 #include "devices.h"
 #include "clock.h"
 
+void pxa27x_clear_otgph(void)
+{
+	if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
+		PSSR |= PSSR_OTGPH;
+}
+EXPORT_SYMBOL(pxa27x_clear_otgph);
+
 /* Crystal clock: 13MHz */
 #define BASE_CLK	13000000
 
@@ -183,36 +190,18 @@ static struct clk pxa27x_clks[] = {
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
-enum {	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
-
-	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
-	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
-	SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
-	SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,
-
+enum {
 	SLEEP_SAVE_PSTR,
-
 	SLEEP_SAVE_CKEN,
-
 	SLEEP_SAVE_MDREFR,
-	SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
-	SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
-
+	SLEEP_SAVE_PCFR,
 	SLEEP_SAVE_COUNT
 };
 
 void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);
-
-	SAVE(GAFR0_L); SAVE(GAFR0_U);
-	SAVE(GAFR1_L); SAVE(GAFR1_U);
-	SAVE(GAFR2_L); SAVE(GAFR2_U);
-	SAVE(GAFR3_L); SAVE(GAFR3_U);
-
 	SAVE(MDREFR);
-	SAVE(PWER); SAVE(PCFR); SAVE(PRER);
-	SAVE(PFER); SAVE(PKWR);
+	SAVE(PCFR);
 
 	SAVE(CKEN);
 	SAVE(PSTR);
@@ -220,24 +209,12 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 
 void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-
-	/* restore registers */
-	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
-	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
-	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
-	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);
-
 	RESTORE(MDREFR);
-	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
-	RESTORE(PFER); RESTORE(PKWR);
+	RESTORE(PCFR);
 
 	PSSR = PSSR_RDH | PSSR_PH;
 
 	RESTORE(CKEN);
-
 	RESTORE(PSTR);
 }
 
@@ -259,8 +236,6 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
-		/* set resume return address */
-		PSPR = virt_to_phys(pxa_cpu_resume);
 		pxa27x_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
@@ -271,12 +246,27 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
 	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
 }
 
+static int pxa27x_cpu_pm_prepare(void)
+{
+	/* set resume return address */
+	PSPR = virt_to_phys(pxa_cpu_resume);
+	return 0;
+}
+
+static void pxa27x_cpu_pm_finish(void)
+{
+	/* ensure not to come back here if it wasn't intended */
+	PSPR = 0;
+}
+
 static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
 	.save_count	= SLEEP_SAVE_COUNT,
 	.save		= pxa27x_cpu_pm_save,
 	.restore	= pxa27x_cpu_pm_restore,
 	.valid		= pxa27x_cpu_pm_valid,
 	.enter		= pxa27x_cpu_pm_enter,
+	.prepare	= pxa27x_cpu_pm_prepare,
+	.finish		= pxa27x_cpu_pm_finish,
 };
 
 static void __init pxa27x_init_pm(void)
@@ -349,7 +339,7 @@ struct platform_device pxa27x_device_i2c_power = {
 	.num_resources	= ARRAY_SIZE(i2c_power_resources),
 };
 
-void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 {
 	local_irq_disable();
 	PCFR |= PCFR_PI2CEN;
@@ -376,6 +366,8 @@ static struct sys_device pxa27x_sysdev[] = {
 	{
 		.cls	= &pxa_irq_sysclass,
 	}, {
+		.cls	= &pxa2xx_mfp_sysclass,
+	}, {
 		.cls	= &pxa_gpio_sysclass,
 	},
 };
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 03cbc381..b3cd5d0 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -203,6 +203,19 @@ static const struct clkops clk_pout_ops = {
 	.disable	= clk_pout_disable,
 };
 
+static void clk_dummy_enable(struct clk *clk)
+{
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static const struct clkops clk_dummy_ops = {
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable,
+};
+
 static struct clk pxa3xx_clks[] = {
 	{
 		.name           = "CLK_POUT",
@@ -211,6 +224,13 @@ static struct clk pxa3xx_clks[] = {
 		.delay          = 70,
 	},
 
+	/* Power I2C clock is always on */
+	{
+		.name		= "I2CCLK",
+		.ops		= &clk_dummy_ops,
+		.dev		= &pxa3xx_device_i2c_power.dev,
+	},
+
 	PXA3xx_CK("LCDCLK",  LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
 	PXA3xx_CK("CAMCLK",  CAMERA, &clk_pxa3xx_hsio_ops, NULL),
 	PXA3xx_CK("AC97CLK", AC97,   &clk_pxa3xx_ac97_ops, NULL),
@@ -509,6 +529,30 @@ void __init pxa3xx_init_irq(void)
  * device registration specific to PXA3xx.
  */
 
+static struct resource i2c_power_resources[] = {
+	{
+		.start  = 0x40f500c0,
+		.end    = 0x40f500d3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+	.name		= "pxa2xx-i2c",
+	.id		= 1,
+	.resource	= i2c_power_resources,
+	.num_resources	= ARRAY_SIZE(i2c_power_resources),
+};
+
+void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+	pxa3xx_device_i2c_power.dev.platform_data = info;
+}
+
 static struct platform_device *devices[] __initdata = {
 /*	&pxa_device_udc,	The UDC driver is PXA25x only */
 	&pxa_device_ffuart,
@@ -522,6 +566,7 @@ static struct platform_device *devices[] __initdata = {
 	&pxa3xx_device_ssp4,
 	&pxa27x_device_pwm0,
 	&pxa27x_device_pwm1,
+	&pxa3xx_device_i2c_power,
 };
 
 static struct sys_device pxa3xx_sysdev[] = {
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 9996c61..1b2af57 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -7,7 +7,7 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/proc-fns.h>
 
 #include <mach/pxa-regs.h>
@@ -20,7 +20,7 @@ static void do_hw_reset(void);
 
 static int reset_gpio = -1;
 
-int init_gpio_reset(int gpio)
+int init_gpio_reset(int gpio, int output)
 {
 	int rc;
 
@@ -30,9 +30,12 @@ int init_gpio_reset(int gpio)
 		goto out;
 	}
 
-	rc = gpio_direction_input(gpio);
+	if (output)
+		rc = gpio_direction_output(gpio, 0);
+	else
+		rc = gpio_direction_input(gpio);
 	if (rc) {
-		printk(KERN_ERR "Can't configure reset_gpio for input\n");
+		printk(KERN_ERR "Can't configure reset_gpio\n");
 		gpio_free(gpio);
 		goto out;
 	}
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index e804ae0..f0845c1 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -132,8 +132,17 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 	if (machine_is_tosa()) // Ugly, better move this function into another module
 	    return 0;
 
+#ifdef CONFIG_CORGI_SSP_DEPRECATED
 	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
 			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+#else
+	extern int max1111_read_channel(int);
+
+	/* max1111 accepts channels from 0-3, however,
+	 * it is encoded from 0-7 here in the code.
+	 */
+	return max1111_read_channel(channel >> 1);
+#endif
 }
 
 void sharpsl_pm_pxa_init(void)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index b569f3b..524f656 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -19,16 +19,23 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/mmc/host.h>
 #include <linux/pm.h>
 #include <linux/backlight.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include <asm/mach/arch.h>
@@ -37,7 +44,7 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
 #include <mach/i2c.h>
@@ -46,7 +53,7 @@
 #include <mach/ohci.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
-#include <mach/akita.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
 #include <mach/sharpsl.h>
 
@@ -57,6 +64,66 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long spitz_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO78_nCS_2,	/* SCOOP #2 */
+	GPIO80_nCS_4,	/* SCOOP #1 */
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* GPIOs */
+	GPIO9_GPIO,	/* SPITZ_GPIO_nSD_DETECT */
+	GPIO81_GPIO,	/* SPITZ_GPIO_nSD_WP */
+	GPIO41_GPIO,	/* SPITZ_GPIO_USB_CONNECT */
+	GPIO37_GPIO,	/* SPITZ_GPIO_USB_HOST */
+	GPIO35_GPIO,	/* SPITZ_GPIO_USB_DEVICE */
+	GPIO22_GPIO,	/* SPITZ_GPIO_HSYNC */
+	GPIO94_GPIO,	/* SPITZ_GPIO_CF_CD */
+	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
+	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
 /*
  * Spitz SCOOP Device #1
  */
@@ -69,10 +136,11 @@ static struct resource spitz_scoop_resources[] = {
 };
 
 static struct scoop_config spitz_scoop_setup = {
-	.io_dir 	= SPITZ_SCP_IO_DIR,
+	.io_dir		= SPITZ_SCP_IO_DIR,
 	.io_out		= SPITZ_SCP_IO_OUT,
-	.suspend_clr = SPITZ_SCP_SUS_CLR,
-	.suspend_set = SPITZ_SCP_SUS_SET,
+	.suspend_clr	= SPITZ_SCP_SUS_CLR,
+	.suspend_set	= SPITZ_SCP_SUS_SET,
+	.gpio_base	= SPITZ_SCP_GPIO_BASE,
 };
 
 struct platform_device spitzscoop_device = {
@@ -97,10 +165,11 @@ static struct resource spitz_scoop2_resources[] = {
 };
 
 static struct scoop_config spitz_scoop2_setup = {
-	.io_dir 	= SPITZ_SCP2_IO_DIR,
+	.io_dir		= SPITZ_SCP2_IO_DIR,
 	.io_out		= SPITZ_SCP2_IO_OUT,
-	.suspend_clr = SPITZ_SCP2_SUS_CLR,
-	.suspend_set = SPITZ_SCP2_SUS_SET,
+	.suspend_clr	= SPITZ_SCP2_SUS_CLR,
+	.suspend_set	= SPITZ_SCP2_SUS_SET,
+	.gpio_base	= SPITZ_SCP2_GPIO_BASE,
 };
 
 struct platform_device spitzscoop2_device = {
@@ -122,7 +191,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
 	unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
 
 	if (new_cpr & 0x0007) {
-	        set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+		gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
 		if (!(cpr & 0x0002) && !(cpr & 0x0004))
 		        mdelay(5);
 		if (device == SPITZ_PWR_CF)
@@ -138,34 +207,13 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
 		if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
 			write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
 		        mdelay(1);
-		        reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+			gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
 		} else {
 		        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
 		}
 	}
 }
 
-static void spitz_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) |	GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
-	GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO85_nPCE_1_MD);
-	pxa_gpio_mode(GPIO54_nPCE_2_MD);
-	pxa_gpio_mode(GPIO104_pSKTSEL_MD);
-}
-
 static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
 {
 	/* Only need to override behaviour for slot 0 */
@@ -191,165 +239,169 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config spitz_pcmcia_config = {
 	.devs         = &spitz_pcmcia_scoop[0],
 	.num_devs     = 2,
-	.pcmcia_init  = spitz_pcmcia_init,
 	.power_ctrl   = spitz_pcmcia_pwr,
 };
 
 EXPORT_SYMBOL(spitzscoop_device);
 EXPORT_SYMBOL(spitzscoop2_device);
 
-
 /*
- * Spitz SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
+ * Spitz Keyboard Device
  */
-struct platform_device spitzssp_device = {
-	.name		= "corgi-ssp",
-	.dev		= {
- 		.parent = &spitzscoop_device.dev,
-	},
+static struct platform_device spitzkbd_device = {
+	.name		= "spitz-keyboard",
 	.id		= -1,
 };
 
-struct corgissp_machinfo spitz_ssp_machinfo = {
-	.port		= 2,
-	.cs_lcdcon	= SPITZ_GPIO_LCDCON_CS,
-	.cs_ads7846	= SPITZ_GPIO_ADS7846_CS,
-	.cs_max1111	= SPITZ_GPIO_MAX1111_CS,
-	.clk_lcdcon	= 520,
-	.clk_ads7846	= 14,
-	.clk_max1111	= 56,
-};
-
 
 /*
- * Spitz Backlight Device
+ * Spitz LEDs
  */
-static void spitz_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static struct generic_bl_info spitz_bl_machinfo = {
-	.name = "corgi-bl",
-	.default_intensity = 0x1f,
-	.limit_mask = 0x0b,
-	.max_intensity = 0x2f,
-	.kick_battery = spitz_bl_kick_battery,
-};
-
-static struct platform_device spitzbl_device = {
-	.name		= "generic-bl",
-	.dev		= {
- 		.platform_data	= &spitz_bl_machinfo,
+static struct gpio_led spitz_gpio_leds[] = {
+	{
+		.name			= "spitz:amber:charge",
+		.default_trigger	= "sharpsl-charge",
+		.gpio			= SPITZ_GPIO_LED_ORANGE,
+	},
+	{
+		.name			= "spitz:green:hddactivity",
+		.default_trigger	= "ide-disk",
+		.gpio			= SPITZ_GPIO_LED_GREEN,
 	},
-	.id		= -1,
 };
 
-
-/*
- * Spitz Keyboard Device
- */
-static struct platform_device spitzkbd_device = {
-	.name		= "spitz-keyboard",
-	.id		= -1,
+static struct gpio_led_platform_data spitz_gpio_leds_info = {
+	.leds		= spitz_gpio_leds,
+	.num_leds	= ARRAY_SIZE(spitz_gpio_leds),
 };
 
-
-/*
- * Spitz LEDs
- */
 static struct platform_device spitzled_device = {
-	.name		= "spitz-led",
+	.name		= "leds-gpio",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &spitz_gpio_leds_info,
+	},
 };
 
-/*
- * Spitz Touch Screen Device
- */
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master spitz_spi_info = {
+	.num_chipselect	= 3,
+};
 
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
+static struct ads7846_platform_data spitz_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= SPITZ_GPIO_TP_INT,
+};
 
-static void inline sharpsl_wait_sync(int gpio)
+static void spitz_ads7846_cs(u32 command)
 {
-	while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
-	while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+	gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static struct device *spitz_pxafb_dev;
+static struct pxa2xx_spi_chip spitz_ads7846_chip = {
+	.cs_control		= spitz_ads7846_cs,
+};
 
-static int is_pxafb_device(struct device * dev, void * data)
+static void spitz_bl_kick_battery(void)
 {
-	struct platform_device *pdev = container_of(dev, struct platform_device, dev);
-
-	return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
-}
+	void (*kick_batt)(void);
 
-static unsigned long spitz_get_hsync_invperiod(void)
-{
-#ifdef CONFIG_FB_PXA
-	if (!spitz_pxafb_dev) {
-		spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
-		if (!spitz_pxafb_dev)
-			return 0;
+	kick_batt = symbol_get(sharpsl_battery_kick);
+	if (kick_batt) {
+		kick_batt();
+		symbol_put(sharpsl_battery_kick);
 	}
-	if (!get_hsync_invperiod)
-		get_hsync_invperiod = symbol_get(pxafb_get_hsync_time);
-	if (!get_hsync_invperiod)
-#endif
-		return 0;
-
-	return get_hsync_invperiod(spitz_pxafb_dev);
 }
 
-static void spitz_put_hsync(void)
-{
-	put_device(spitz_pxafb_dev);
-	if (get_hsync_invperiod)
-		symbol_put(pxafb_get_hsync_time);
-	spitz_pxafb_dev = NULL;
-	get_hsync_invperiod = NULL;
-}
+static struct corgi_lcd_platform_data spitz_lcdcon_info = {
+	.init_mode		= CORGI_LCD_MODE_VGA,
+	.max_intensity		= 0x2f,
+	.default_intensity	= 0x1f,
+	.limit_mask		= 0x0b,
+	.gpio_backlight_cont	= SPITZ_GPIO_BACKLIGHT_CONT,
+	.gpio_backlight_on	= SPITZ_GPIO_BACKLIGHT_ON,
+	.kick_battery		= spitz_bl_kick_battery,
+};
 
-static void spitz_wait_hsync(void)
+static void spitz_lcdcon_cs(u32 command)
 {
-	sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
+	gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static struct resource spitzts_resources[] = {
-	[0] = {
-		.start		= SPITZ_IRQ_GPIO_TP_INT,
-		.end		= SPITZ_IRQ_GPIO_TP_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
+static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
+	.cs_control	= spitz_lcdcon_cs,
 };
 
-static struct corgits_machinfo  spitz_ts_machinfo = {
-	.get_hsync_invperiod = spitz_get_hsync_invperiod,
-	.put_hsync           = spitz_put_hsync,
-	.wait_hsync          = spitz_wait_hsync,
+static void spitz_max1111_cs(u32 command)
+{
+	gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip spitz_max1111_chip = {
+	.cs_control	= spitz_max1111_cs,
 };
 
-static struct platform_device spitzts_device = {
-	.name		= "corgi-ts",
-	.dev		= {
- 		.parent = &spitzssp_device.dev,
-		.platform_data	= &spitz_ts_machinfo,
+static struct spi_board_info spitz_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 1200000,
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.platform_data	= &spitz_ads7846_info,
+		.controller_data= &spitz_ads7846_chip,
+		.irq		= gpio_to_irq(SPITZ_GPIO_TP_INT),
+	}, {
+		.modalias	= "corgi-lcd",
+		.max_speed_hz	= 50000,
+		.bus_num	= 2,
+		.chip_select	= 1,
+		.platform_data	= &spitz_lcdcon_info,
+		.controller_data= &spitz_lcdcon_chip,
+	}, {
+		.modalias	= "max1111",
+		.max_speed_hz	= 450000,
+		.bus_num	= 2,
+		.chip_select	= 2,
+		.controller_data= &spitz_max1111_chip,
 	},
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(spitzts_resources),
-	.resource	= spitzts_resources,
 };
 
+static void __init spitz_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
+	if (err)
+		return;
+
+	err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
+	if (err)
+		goto err_free_1;
+
+	err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
+	if (err)
+		goto err_free_2;
+
+	if (machine_is_akita()) {
+		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+	}
+
+	pxa2xx_set_spi_info(2, &spitz_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
+	return;
+
+err_free_2:
+	gpio_free(SPITZ_GPIO_LCDCON_CS);
+err_free_1:
+	gpio_free(SPITZ_GPIO_ADS7846_CS);
+}
+#else
+static inline void spitz_init_spi(void) {}
+#endif
 
 /*
  * MMC/SD Device
@@ -364,24 +416,35 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo
 {
 	int err;
 
-	/* setup GPIO for PXA27x MMC controller	*/
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-	pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN);
-	pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN);
+	err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
+	if (err)
+		goto err_out;
+
+	err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
+	if (err)
+		goto err_free_1;
+
+	gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
+	gpio_direction_input(SPITZ_GPIO_nSD_WP);
 
 	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
 	err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  IRQF_DISABLED | IRQF_TRIGGER_RISING |
+			  IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+	if (err) {
+		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+				__func__);
+		goto err_free_2;
+	}
+	return 0;
 
+err_free_2:
+	gpio_free(SPITZ_GPIO_nSD_WP);
+err_free_1:
+	gpio_free(SPITZ_GPIO_nSD_DETECT);
+err_out:
 	return err;
 }
 
@@ -397,12 +460,14 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 
 static int spitz_mci_get_ro(struct device *dev)
 {
-	return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP);
+	return gpio_get_value(SPITZ_GPIO_nSD_WP);
 }
 
 static void spitz_mci_exit(struct device *dev, void *data)
 {
 	free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(SPITZ_GPIO_nSD_WP);
+	gpio_free(SPITZ_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
@@ -419,27 +484,24 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
  */
 static int spitz_ohci_init(struct device *dev)
 {
-	/* Only Port 2 is connected */
-	pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN);
-	pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT);
-	pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN);
-
-	/* Setup USB Port 2 Output Control Register */
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-
-	GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST);
+	int err;
 
-	UHCHR = (UHCHR) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+	err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
+	if (err)
+		return err;
 
-	UHCRHDA |= UHCRHDA_NOCP;
+	/* Only Port 2 is connected
+	 * Setup USB Port 2 Output Control Register
+	 */
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 
-	return 0;
+	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 }
 
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	.init		= spitz_ohci_init,
+	.flags		= ENABLE_PORT_ALL | NO_OC_PROTECTION,
 	.power_budget	= 150,
 };
 
@@ -447,29 +509,50 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
 /*
  * Irda
  */
+static int spitz_irda_startup(struct device *dev)
+{
+	int rc;
+
+	rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
+	if (rc)
+		goto err;
+
+	rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
+	if (rc)
+		goto err_dir;
+
+	return 0;
+
+err_dir:
+	gpio_free(SPITZ_GPIO_IR_ON);
+err:
+	return rc;
+}
+
+static void spitz_irda_shutdown(struct device *dev)
+{
+	gpio_free(SPITZ_GPIO_IR_ON);
+}
+
 static void spitz_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF)
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
-	else
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+	gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
 	pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
 static void akita_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF)
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
-	else
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+	gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
 	pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = spitz_irda_transceiver_mode,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= spitz_irda_transceiver_mode,
+	.startup		= spitz_irda_startup,
+	.shutdown		= spitz_irda_shutdown,
 };
 
 
@@ -477,14 +560,6 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = {
  * Spitz PXA Framebuffer
  */
 
-static void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on)
-		corgi_lcdtg_hw_init(var->xres);
-	else
-		corgi_lcdtg_suspend();
-}
-
 static struct pxafb_mode_info spitz_pxafb_modes[] = {
 {
 	.pixclock       = 19231,
@@ -517,18 +592,13 @@ static struct pxafb_mach_info spitz_pxafb_info = {
 	.modes          = &spitz_pxafb_modes[0],
 	.num_modes      = 2,
 	.fixed_modes    = 1,
-	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM,
-	.lccr3          = LCCR3_PixRsEdg | LCCR3_OutEnH,
-	.pxafb_lcd_power = spitz_lcd_power,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
 };
 
 
 static struct platform_device *devices[] __initdata = {
 	&spitzscoop_device,
-	&spitzssp_device,
 	&spitzkbd_device,
-	&spitzts_device,
-	&spitzbl_device,
 	&spitzled_device,
 };
 
@@ -548,63 +618,32 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
-	init_gpio_reset(SPITZ_GPIO_ON_RESET);
+	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
 	PMCR = 0x00;
 
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
-
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
 
-	corgi_ssp_set_machinfo(&spitz_ssp_machinfo);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
 
-	pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN);
+	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_mci_info(&spitz_mci_platform_data);
 	pxa_set_ohci_info(&spitz_ohci_platform_data);
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
-	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
 	pxa_set_i2c_info(NULL);
 }
 
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void spitz_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via SCOOP */
-	if (intensity & 0x0020)
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-	else
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
-	if (intensity)
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-	else
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-}
-
 static void __init spitz_init(void)
 {
 	platform_scoop_config = &spitz_pcmcia_config;
 
-	spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
-
 	common_init();
 
 	platform_device_register(&spitzscoop2_device);
@@ -615,32 +654,17 @@ static void __init spitz_init(void)
 /*
  * Akita IO Expander
  */
-struct platform_device akitaioexp_device = {
-	.name		= "akita-ioexp",
-	.id		= -1,
+static struct pca953x_platform_data akita_ioexp = {
+	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
 };
 
-EXPORT_SYMBOL_GPL(akitaioexp_device);
-
-static void akita_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via IO-Expander */
-	if (intensity & 0x0020)
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-	else
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-
-	if (intensity)
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-	else
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-}
+static struct i2c_board_info akita_i2c_board_info[] = {
+	{
+		.type		= "max7310",
+		.addr		= 0x18,
+		.platform_data	= &akita_ioexp,
+	},
+};
 
 static void __init akita_init(void)
 {
@@ -649,11 +673,10 @@ static void __init akita_init(void)
 	/* We just pretend the second element of the array doesn't exist */
 	spitz_pcmcia_config.num_devs = 1;
 	platform_scoop_config = &spitz_pcmcia_config;
-	spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity;
 
-	platform_device_register(&akitaioexp_device);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
 
-	spitzscoop_device.dev.parent = &akitaioexp_device.dev;
 	common_init();
 }
 #endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 8a40505..53018db 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -21,7 +21,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
 
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
@@ -48,44 +47,35 @@ static void spitz_charger_init(void)
 
 static void spitz_measure_temp(int on)
 {
-	if (on)
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
-	else
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
+	gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on);
 }
 
 static void spitz_charge(int on)
 {
 	if (on) {
 		if (sharpsl_pm.flags & SHARPSL_SUSPENDED) {
-			set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+			gpio_set_value(SPITZ_GPIO_JK_B, 1);
+			gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
 		} else {
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+			gpio_set_value(SPITZ_GPIO_JK_B, 0);
+			gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
 		}
 	} else {
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+		gpio_set_value(SPITZ_GPIO_JK_B, 0);
+		gpio_set_value(SPITZ_GPIO_CHRG_ON, 1);
 	}
 }
 
 static void spitz_discharge(int on)
 {
-	if (on)
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
-	else
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
+	gpio_set_value(SPITZ_GPIO_JK_A, on);
 }
 
 /* HACK - For unknown reasons, accurate voltage readings are only made with a load
    on the power bus which the green led on spitz provides */
 static void spitz_discharge1(int on)
 {
-	if (on)
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
-	else
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+	gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
 }
 
 static void spitz_presuspend(void)
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 9bd93c5..2c31ec7 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -28,8 +28,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/ssp.h>
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 67e1850..f8a9a62 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
 
 #include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <mach/pxa-regs.h>
@@ -155,7 +155,7 @@ static void __init pxa_timer_init(void)
 	OIER = 0;
 	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
 
-	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+	if (cpu_is_pxa25x())
 		clock_tick_rate = 3686400;
 	else if (machine_is_mainstone())
 		clock_tick_rate = 3249600;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 9f3ef9e..224897a 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -31,6 +31,7 @@
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 #include <linux/rfkill.h>
+#include <linux/spi/spi.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -42,6 +43,7 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/tosa_bt.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/mach/arch.h>
 #include <mach/tosa.h>
@@ -612,7 +614,7 @@ static int tosa_tc6393xb_enable(struct platform_device *dev)
 	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
 	if (rc)
 		goto err_req_suspend;
-	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
 	if (rc)
 		goto err_req_l3v;
 	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
@@ -706,16 +708,39 @@ static struct tmio_nand_data tosa_tc6393xb_nand_config = {
 	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
 };
 
-static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+static int tosa_tc6393xb_setup(struct platform_device *dev)
+{
+	int rc;
+
+	rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
+	if (rc)
+		goto err_req;
+
+	rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
+	if (rc)
+		goto err_dir;
+
+	return rc;
+
+err_dir:
+	gpio_free(TOSA_GPIO_CARD_VCC_ON);
+err_req:
+	return rc;
+}
+
+static void tosa_tc6393xb_teardown(struct platform_device *dev)
+{
+	gpio_free(TOSA_GPIO_CARD_VCC_ON);
+}
+
+static struct tc6393xb_platform_data tosa_tc6393xb_data = {
 	.scr_pll2cr	= 0x0cc1,
 	.scr_gper	= 0x3300,
-	.scr_gpo_dsr	=
-		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
-	.scr_gpo_doecr	=
-		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
 
 	.irq_base	= IRQ_BOARD_START,
 	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
+	.setup		= tosa_tc6393xb_setup,
+	.teardown	= tosa_tc6393xb_teardown,
 
 	.enable		= tosa_tc6393xb_enable,
 	.disable	= tosa_tc6393xb_disable,
@@ -723,6 +748,8 @@ static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
 	.resume		= tosa_tc6393xb_resume,
 
 	.nand_data	= &tosa_tc6393xb_nand_config,
+
+	.resume_restore = 1,
 };
 
 
@@ -730,7 +757,7 @@ static struct platform_device tc6393xb_device = {
 	.name	= "tc6393xb",
 	.id	= -1,
 	.dev	= {
-		.platform_data	= &tosa_tc6393xb_setup,
+		.platform_data	= &tosa_tc6393xb_data,
 	},
 	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
 	.resource	= tc6393xb_resources,
@@ -747,6 +774,20 @@ static struct platform_device tosa_bt_device = {
 	.dev.platform_data = &tosa_bt_data,
 };
 
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "tosa-lcd",
+		// .platform_data
+		.max_speed_hz	= 28750,
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
 
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
@@ -781,7 +822,7 @@ static void __init tosa_init(void)
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
-	init_gpio_reset(TOSA_GPIO_ON_RESET);
+	init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
 
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;
@@ -801,6 +842,9 @@ static void __init tosa_init(void)
 	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;
 
+	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
 	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 3ed757e..a72e3ad 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -22,8 +22,8 @@
 #include <linux/fb.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/mtd.h>
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 
@@ -31,7 +31,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,41 +39,148 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/trizeps4.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
 
-/********************************************************************************************
+/*	comment out the following line if you want to use the
+ *	Standard UART from PXA for serial / irda transmission
+ *	and acivate it if you have status leds connected */
+#define STATUS_LEDS_ON_STUART_PINS 1
+
+/*****************************************************************************
+ * MultiFunctionPins of CPU
+ *****************************************************************************/
+static unsigned long trizeps4_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO15_nCS_1,		/* DiskOnChip CS */
+	GPIO93_GPIO,		/* TRIZEPS4_DOC_IRQ */
+	GPIO94_GPIO,		/* DOC lock */
+
+	GPIO78_nCS_2,		/* DM9000 CS */
+	GPIO101_GPIO,		/* TRIZEPS4_ETH_IRQ */
+
+	GPIO79_nCS_3,		/* Logic CS */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* Logic irq */
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* UART */
+	GPIO9_FFUART_CTS,
+	GPIO10_FFUART_DCD,
+	GPIO16_FFUART_TXD,
+	GPIO33_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO82_FFUART_DTR,
+	GPIO83_FFUART_RTS,
+	GPIO96_FFUART_RXD,
+
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+#ifdef STATUS_LEDS_ON_STUART_PINS
+	GPIO46_GPIO,
+	GPIO47_GPIO,
+#else
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+#endif
+	/* PCMCIA */
+	GPIO11_GPIO,			/* TRIZEPS4_CD_IRQ */
+	GPIO13_GPIO,			/* TRIZEPS4_READY_NINT */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO102_nPCE_1,
+	GPIO104_PSKTSEL,
+
+	/* MultiMediaCard */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO12_GPIO,			/* TRIZEPS4_MMC_IRQ */
+
+	/* USB OHCI */
+	GPIO88_USBH1_PWR,		/* USBHPWR1 */
+	GPIO89_USBH1_PEN,		/* USBHPEN1 */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+
+static unsigned long trizeps4wl_pin_config[] __initdata = {
+	/* SSP 2 */
+	GPIO14_SSP2_SFRM,
+	GPIO19_SSP2_SCLK,
+	GPIO53_GPIO,			/* TRIZEPS4_SPI_IRQ */
+	GPIO86_SSP2_RXD,
+	GPIO87_SSP2_TXD,
+};
+
+/****************************************************************************
  * ONBOARD FLASH
- ********************************************************************************************/
+ ****************************************************************************/
 static struct mtd_partition trizeps4_partitions[] = {
 	{
 		.name =		"Bootloader",
 		.offset =	0x00000000,
 		.size =		0x00040000,
 		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
+	}, {
 		.name =		"Backup",
 		.offset =	0x00040000,
 		.size =		0x00040000,
-	},{
+	}, {
 		.name =		"Image",
 		.offset =	0x00080000,
 		.size =		0x01080000,
-	},{
+	}, {
 		.name =		"IPSM",
 		.offset =	0x01100000,
 		.size =		0x00e00000,
-	},{
+	}, {
 		.name =		"Registry",
 		.offset =	0x01f00000,
 		.size =		MTDPART_SIZ_FULL,
@@ -105,9 +211,9 @@ static struct platform_device flash_device = {
 	.num_resources = 1,
 };
 
-/********************************************************************************************
+/****************************************************************************
  * DAVICOM DM9000 Ethernet
- ********************************************************************************************/
+ ****************************************************************************/
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= TRIZEPS4_ETH_PHYS+0x300,
@@ -122,67 +228,68 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= TRIZEPS4_ETH_IRQ,
 		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
+static struct dm9000_plat_data tri_dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
 static struct platform_device dm9000_device = {
 	.name		= "dm9000",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm9000_resources),
 	.resource	= dm9000_resources,
+	.dev		= {
+		.platform_data = &tri_dm9000_platdata,
+	}
 };
 
-/********************************************************************************************
- * PXA270 serial ports
- ********************************************************************************************/
-static struct plat_serial8250_port tri_serial_ports[] = {
-#ifdef CONFIG_SERIAL_PXA
-	/* this uses the own PXA driver */
+/****************************************************************************
+ * LED's on GPIO pins of PXA
+ ****************************************************************************/
+static struct gpio_led trizeps4_led[] = {
+#ifdef STATUS_LEDS_ON_STUART_PINS
 	{
-		0,
-	},
-#else
-	/* this uses the generic 8520 driver */
-	[0] = {
-		.membase	= (void *)&FFUART,
-		.irq		= IRQ_FFUART,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-		.uartclk	= (921600*16),
-	},
-	[1] = {
-		.membase	= (void *)&BTUART,
-		.irq		= IRQ_BTUART,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-		.uartclk	= (921600*16),
+		.name = "led0:orange:heartbeat",	/* */
+		.default_trigger = "heartbeat",
+		.gpio = GPIO_HEARTBEAT_LED,
+		.active_low = 1,
 	},
 	{
-		0,
+		.name = "led1:yellow:cpubusy",		/* */
+		.default_trigger = "cpu-busy",
+		.gpio = GPIO_SYS_BUSY_LED,
+		.active_low = 1,
 	},
 #endif
 };
 
-static struct platform_device uart_devices = {
-	.name		= "serial8250",
-	.id		= 0,
+static struct gpio_led_platform_data trizeps4_led_data = {
+	.leds		= trizeps4_led,
+	.num_leds	= ARRAY_SIZE(trizeps4_led),
+};
+
+static struct platform_device leds_devices = {
+	.name		= "leds-gpio",
+	.id		= -1,
 	.dev		= {
-		.platform_data	= tri_serial_ports,
+		.platform_data	= &trizeps4_led_data,
 	},
-	.num_resources	= 0,
-	.resource	= NULL,
 };
 
-static struct platform_device * trizeps4_devices[] __initdata = {
+static struct platform_device *trizeps4_devices[] __initdata = {
 	&flash_device,
-	&uart_devices,
 	&dm9000_device,
+	&leds_devices,
+};
+
+static struct platform_device *trizeps4wl_devices[] __initdata = {
+	&flash_device,
+	&leds_devices,
 };
 
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
 static short trizeps_conxs_bcr;
 
 /* PCCARD power switching supports only 3,3V */
@@ -192,108 +299,63 @@ void board_pcmcia_power(int power)
 		/* switch power on, put in reset and enable buffers */
 		trizeps_conxs_bcr |= power;
 		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
-		ConXS_BCR = trizeps_conxs_bcr;
+		trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
+		BCR_writew(trizeps_conxs_bcr);
 		/* wait a little */
 		udelay(2000);
 		/* take reset away */
-		trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
-		ConXS_BCR = trizeps_conxs_bcr;
+		trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
+		BCR_writew(trizeps_conxs_bcr);
 		udelay(2000);
 	} else {
 		/* put in reset */
 		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		ConXS_BCR = trizeps_conxs_bcr;
+		BCR_writew(trizeps_conxs_bcr);
 		udelay(1000);
 		/* switch power off */
-		trizeps_conxs_bcr &= ~(0xf);
-		ConXS_BCR = trizeps_conxs_bcr;
-
+		trizeps_conxs_bcr &= ~0xf;
+		BCR_writew(trizeps_conxs_bcr);
 	}
-	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr);
+	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
+			trizeps_conxs_bcr);
 }
+EXPORT_SYMBOL(board_pcmcia_power);
 
 /* backlight power switching for LCD panel */
 static void board_backlight_power(int on)
 {
-	if (on) {
+	if (on)
 		trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
-	} else {
+	else
 		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
-	}
-	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr);
-	ConXS_BCR = trizeps_conxs_bcr;
-}
 
-/* Powersupply for MMC/SD cardslot */
-static void board_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		pr_debug("%s: on\n", __func__);
-		/* FIXME fill in values here */
-	} else {
-		pr_debug("%s: off\n", __func__);
-		/* FIXME fill in values here */
-	}
-}
-
-static short trizeps_conxs_ircr;
-
-/* Switch modes and Power for IRDA receiver */
-static void board_irda_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		/* Slow mode */
-		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
-	} else if (mode & IR_FIRMODE) {
-		/* Fast mode */
-		trizeps_conxs_ircr |= ConXS_IRCR_MODE;
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	if (mode & IR_OFF) {
-		trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	} else {
-		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-	}
-	/* FIXME write values to register */
-	local_irq_restore(flags);
+	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
+			trizeps_conxs_bcr);
+	BCR_writew(trizeps_conxs_bcr);
 }
 
-#else
-/* for other baseboards define dummies */
-void board_pcmcia_power(int power)	{;}
-#define board_backlight_power		NULL
-#define board_mci_power			NULL
-#define board_irda_mode			NULL
-
-#endif		/* CONFIG_MACH_TRIZEPS4_CONXS */
-EXPORT_SYMBOL(board_pcmcia_power);
+/* a I2C based RTC is known on CONXS board */
+static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
+	{ I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
+};
 
-static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, void *data)
+/****************************************************************************
+ * MMC card slot external to module
+ ****************************************************************************/
+static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+		void *data)
 {
 	int err;
-	/* setup GPIO for PXA27x MMC controller */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
 
 	err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING,
-			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
-	return err;
+		IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM,
+		"MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
+						"MMC card detect IRQ\n");
+		return -1;
+	}
+	return 0;
 }
 
 static void trizeps4_mci_exit(struct device *dev, void *data)
@@ -303,39 +365,69 @@ static void trizeps4_mci_exit(struct device *dev, void *data)
 
 static struct pxamci_platform_data trizeps4_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay	= 1,
 	.init 		= trizeps4_mci_init,
 	.exit		= trizeps4_mci_exit,
-	.setpower 	= board_mci_power,
+	.get_ro		= NULL,	/* write-protection not supported */
+	.setpower 	= NULL,	/* power-switching not supported */
 };
 
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode = board_irda_mode,
-};
+/****************************************************************************
+ * IRDA mode switching on stuart
+ ****************************************************************************/
+#ifndef STATUS_LEDS_ON_STUART_PINS
+static short trizeps_conxs_ircr;
 
-static int trizeps4_ohci_init(struct device *dev)
+static int trizeps4_irda_startup(struct device *dev)
 {
-	/* setup Port1 GPIO pin. */
-	pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
-	pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
-
-	/* Set the Power Control Polarity Low and Power Sense
-	   Polarity Low to active low. */
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
+	trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+	IRCR_writew(trizeps_conxs_ircr);
 	return 0;
 }
 
-static void trizeps4_ohci_exit(struct device *dev)
+static void trizeps4_irda_shutdown(struct device *dev)
+{
+	trizeps_conxs_ircr |= ConXS_IRCR_SD;
+	IRCR_writew(trizeps_conxs_ircr);
+}
+
+static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
 {
-	;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	/* Switch mode */
+	if (mode & IR_SIRMODE)
+		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;	/* Slow mode */
+	else if (mode & IR_FIRMODE)
+		trizeps_conxs_ircr |= ConXS_IRCR_MODE;	/* Fast mode */
+
+	/* Switch power */
+	if (mode & IR_OFF)
+		trizeps_conxs_ircr |= ConXS_IRCR_SD;
+	else
+		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+
+	IRCR_writew(trizeps_conxs_ircr);
+	local_irq_restore(flags);
+
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= trizeps4_irda_transceiver_mode,
+	.startup		= trizeps4_irda_startup,
+	.shutdown		= trizeps4_irda_shutdown,
+};
+#endif
+
+/****************************************************************************
+ * OHCI USB port
+ ****************************************************************************/
 static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= trizeps4_ohci_init,
-	.exit		= trizeps4_ohci_exit,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
 static struct map_desc trizeps4_io_desc[] __initdata = {
@@ -372,105 +464,80 @@ static struct map_desc trizeps4_io_desc[] __initdata = {
 };
 
 static struct pxafb_mode_info sharp_lcd_mode = {
-    .pixclock		= 78000,
-    .xres		= 640,
-    .yres		= 480,
-    .bpp		= 8,
-    .hsync_len		= 4,
-    .left_margin	= 4,
-    .right_margin	= 4,
-    .vsync_len		= 2,
-    .upper_margin	= 0,
-    .lower_margin	= 0,
-    .sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-    .cmap_greyscale	= 0,
+	.pixclock	= 78000,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 8,
+	.hsync_len	= 4,
+	.left_margin	= 4,
+	.right_margin	= 4,
+	.vsync_len	= 2,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 0,
 };
 
 static struct pxafb_mach_info sharp_lcd = {
-    .modes		= &sharp_lcd_mode,
-    .num_modes	= 1,
-    .cmap_inverse	= 0,
-    .cmap_static	= 0,
-    .lccr0		= LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
-    .lccr3		= 0x0340ff02,
-    .pxafb_backlight_power = board_backlight_power,
+	.modes		= &sharp_lcd_mode,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.pxafb_backlight_power = board_backlight_power,
 };
 
 static struct pxafb_mode_info toshiba_lcd_mode = {
-    .pixclock		= 39720,
-    .xres		= 640,
-    .yres		= 480,
-    .bpp		= 8,
-    .hsync_len		= 63,
-    .left_margin	= 12,
-    .right_margin	= 12,
-    .vsync_len		= 4,
-    .upper_margin	= 32,
-    .lower_margin	= 10,
-    .sync		= 0,
-    .cmap_greyscale	= 0,
+	.pixclock	= 39720,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 8,
+	.hsync_len	= 63,
+	.left_margin	= 12,
+	.right_margin	= 12,
+	.vsync_len	= 4,
+	.upper_margin	= 32,
+	.lower_margin	= 10,
+	.sync		= 0,
+	.cmap_greyscale	= 0,
 };
 
 static struct pxafb_mach_info toshiba_lcd = {
-    .modes		= &toshiba_lcd_mode,
-    .num_modes	= 1,
-    .cmap_inverse	= 0,
-    .cmap_static	= 0,
-    .lccr0		= LCCR0_Color | LCCR0_Act,
-    .lccr3		= 0x03400002,
-    .pxafb_backlight_power = board_backlight_power,
+	.modes		= &toshiba_lcd_mode,
+	.num_modes	= 1,
+	.lcd_conn	= (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.pxafb_backlight_power = board_backlight_power,
 };
 
 static void __init trizeps4_init(void)
 {
-	platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
+	if (machine_is_trizeps4wl()) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
+		platform_add_devices(trizeps4wl_devices,
+					ARRAY_SIZE(trizeps4wl_devices));
+	} else {
+		platform_add_devices(trizeps4_devices,
+					ARRAY_SIZE(trizeps4_devices));
+	}
 
-/*	set_pxa_fb_info(&sharp_lcd); */
-	set_pxa_fb_info(&toshiba_lcd);
+	if (0)	/* dont know how to determine LCD */
+		set_pxa_fb_info(&sharp_lcd);
+	else
+		set_pxa_fb_info(&toshiba_lcd);
 
 	pxa_set_mci_info(&trizeps4_mci_platform_data);
+#ifndef STATUS_LEDS_ON_STUART_PINS
 	pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+#endif
 	pxa_set_ohci_info(&trizeps4_ohci_platform_data);
 	pxa_set_ac97_info(NULL);
-}
-
-static void __init trizeps4_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-
-	/* for DiskOnChip */
-	pxa_gpio_mode(GPIO15_nCS_1_MD);
-
-	/* for off-module PIC on ConXS board */
-	pxa_gpio_mode(GPIO_PIC | GPIO_IN);
-
-	/* UCB1400 irq */
-	pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
-
-	/* for DM9000 LAN */
-	pxa_gpio_mode(GPIO78_nCS_2_MD);
-	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-
-	/* for PCMCIA device */
-	pxa_gpio_mode(GPIO_PCD | GPIO_IN);
-	pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
-
-	/* for I2C adapter */
-	pxa_gpio_mode(GPIO117_I2CSCL_MD);
-	pxa_gpio_mode(GPIO118_I2CSDA_MD);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, trizeps4_i2c_devices,
+					ARRAY_SIZE(trizeps4_i2c_devices));
 
-	/* MMC_DET s.o. */
-	pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
-
-	/* whats that for ??? */
-	pxa_gpio_mode(GPIO79_nCS_3_MD);
-
-#ifdef CONFIG_LEDS
-	pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);		/* LED1 */
-	pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);		/* LED2 */
-#endif
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
 #ifdef CONFIG_IDE_PXA_CF
 	/* if boot direct from compact flash dont disable power */
 	trizeps_conxs_bcr = 0x0009;
@@ -478,18 +545,24 @@ static void __init trizeps4_map_io(void)
 	/* this is the reset value */
 	trizeps_conxs_bcr = 0x00A0;
 #endif
-	ConXS_BCR = trizeps_conxs_bcr;
-#endif
+	BCR_writew(trizeps_conxs_bcr);
+	board_backlight_power(1);
+}
+
+static void __init trizeps4_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 
-#warning FIXME - accessing PM registers directly is deprecated
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
+	if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+		/* if flash is 16 bit wide its a Trizeps4 WL */
+		__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
+		trizeps4_flash_data[0].width = 2;
+	} else {
+		/* if flash is 32 bit wide its a Trizeps4 */
+		__machine_arch_type = MACH_TYPE_TRIZEPS4;
+		trizeps4_flash_data[0].width = 4;
+	}
 }
 
 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
@@ -503,3 +576,13 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	.timer		= &pxa_timer,
 MACHINE_END
 
+MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
+	/* MAINTAINER("Jürgen Schindele") */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
+	.init_machine	= trizeps4_init,
+	.map_io		= trizeps4_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
new file mode 100644
index 0000000..4b3120d
--- /dev/null
+++ b/arch/arm/mach-pxa/viper.c
@@ -0,0 +1,983 @@
+/*
+ *  linux/arch/arm/mach-pxa/viper.c
+ *
+ *  Support for the Arcom VIPER SBC.
+ *
+ *  Author:	Ian Campbell
+ *  Created:    Feb 03, 2003
+ *  Copyright:  Arcom Control Systems
+ *
+ *  Maintained by Marc Zyngier <maz@misterjones.org>
+ *                             <marc.zyngier@altran.com>
+ *
+ * Based on lubbock.c:
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/memory.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/gpio.h>
+#include <linux/i2c-gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smc91x.h>
+#include <linux/pwm_backlight.h>
+#include <linux/usb/isp116x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/bitfield.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/i2c.h>
+#include <mach/viper.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned int icr;
+
+static void viper_icr_set_bit(unsigned int bit)
+{
+	icr |= bit;
+	VIPER_ICR = icr;
+}
+
+static void viper_icr_clear_bit(unsigned int bit)
+{
+	icr &= ~bit;
+	VIPER_ICR = icr;
+}
+
+/* This function is used from the pcmcia module to reset the CF */
+void viper_cf_rst(int state)
+{
+	if (state)
+		viper_icr_set_bit(VIPER_ICR_CF_RST);
+	else
+		viper_icr_clear_bit(VIPER_ICR_CF_RST);
+}
+EXPORT_SYMBOL(viper_cf_rst);
+
+/*
+ * The CPLD version register was not present on VIPER boards prior to
+ * v2i1. On v1 boards where the version register is not present we
+ * will just read back the previous value from the databus.
+ *
+ * Therefore we do two reads. The first time we write 0 to the
+ * (read-only) register before reading and the second time we write
+ * 0xff first. If the two reads do not match or they read back as 0xff
+ * or 0x00 then we have version 1 hardware.
+ */
+static u8 viper_hw_version(void)
+{
+	u8 v1, v2;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	VIPER_VERSION = 0;
+	v1 = VIPER_VERSION;
+	VIPER_VERSION = 0xff;
+	v2 = VIPER_VERSION;
+
+	v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
+
+	local_irq_restore(flags);
+	return v1;
+}
+
+/* CPU sysdev */
+static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+	viper_icr_set_bit(VIPER_ICR_R_DIS);
+	return 0;
+}
+
+static int viper_cpu_resume(struct sys_device *sysdev)
+{
+	viper_icr_clear_bit(VIPER_ICR_R_DIS);
+	return 0;
+}
+
+static struct sysdev_driver viper_cpu_sysdev_driver = {
+	.suspend	= viper_cpu_suspend,
+	.resume		= viper_cpu_resume,
+};
+
+static unsigned int current_voltage_divisor;
+
+/*
+ * If force is not true then step from existing to new divisor. If
+ * force is true then jump straight to the new divisor. Stepping is
+ * used because if the jump in voltage is too large, the VCC can dip
+ * too low and the regulator cuts out.
+ *
+ * force can be used to initialize the divisor to a know state by
+ * setting the value for the current clock speed, since we are already
+ * running at that speed we know the voltage should be pretty close so
+ * the jump won't be too large
+ */
+static void viper_set_core_cpu_voltage(unsigned long khz, int force)
+{
+	int i = 0;
+	unsigned int divisor = 0;
+	const char *v;
+
+	if (khz < 200000) {
+		v = "1.0"; divisor = 0xfff;
+	} else if (khz < 300000) {
+		v = "1.1"; divisor = 0xde5;
+	} else {
+		v = "1.3"; divisor = 0x325;
+	}
+
+	pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
+		 v, (int)khz / 1000, (int)khz % 1000);
+
+#define STEP 0x100
+	do {
+		int step;
+
+		if (force)
+			step = divisor;
+		else if (current_voltage_divisor < divisor - STEP)
+			step = current_voltage_divisor + STEP;
+		else if (current_voltage_divisor > divisor + STEP)
+			step = current_voltage_divisor - STEP;
+		else
+			step = divisor;
+		force = 0;
+
+		gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+		for (i = 1 << 11 ; i > 0 ; i >>= 1) {
+			udelay(1);
+
+			gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
+			udelay(1);
+
+			gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
+			udelay(1);
+
+			gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+		}
+		udelay(1);
+
+		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
+		udelay(1);
+
+		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+		current_voltage_divisor = step;
+	} while (current_voltage_divisor != divisor);
+}
+
+/* Interrupt handling */
+static unsigned long viper_irq_enabled_mask;
+static const int viper_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
+static const int viper_isa_irq_map[] = {
+	0,		/* ISA irq #0, invalid */
+	0,		/* ISA irq #1, invalid */
+	0,		/* ISA irq #2, invalid */
+	1 << 0,		/* ISA irq #3 */
+	1 << 1,		/* ISA irq #4 */
+	1 << 2,		/* ISA irq #5 */
+	1 << 3,		/* ISA irq #6 */
+	1 << 4,		/* ISA irq #7 */
+	0,		/* ISA irq #8, invalid */
+	1 << 8,		/* ISA irq #9 */
+	1 << 5,		/* ISA irq #10 */
+	1 << 6,		/* ISA irq #11 */
+	1 << 7,		/* ISA irq #12 */
+	0,		/* ISA irq #13, invalid */
+	1 << 9,		/* ISA irq #14 */
+	1 << 10,	/* ISA irq #15 */
+};
+
+static inline int viper_irq_to_bitmask(unsigned int irq)
+{
+	return viper_isa_irq_map[irq - PXA_ISA_IRQ(0)];
+}
+
+static inline int viper_bit_to_irq(int bit)
+{
+	return viper_isa_irqs[bit] + PXA_ISA_IRQ(0);
+}
+
+static void viper_ack_irq(unsigned int irq)
+{
+	int viper_irq = viper_irq_to_bitmask(irq);
+
+	if (viper_irq & 0xff)
+		VIPER_LO_IRQ_STATUS = viper_irq;
+	else
+		VIPER_HI_IRQ_STATUS = (viper_irq >> 8);
+}
+
+static void viper_mask_irq(unsigned int irq)
+{
+	viper_irq_enabled_mask &= ~(viper_irq_to_bitmask(irq));
+}
+
+static void viper_unmask_irq(unsigned int irq)
+{
+	viper_irq_enabled_mask |= viper_irq_to_bitmask(irq);
+}
+
+static inline unsigned long viper_irq_pending(void)
+{
+	return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
+			viper_irq_enabled_mask;
+}
+
+static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending;
+
+	pending = viper_irq_pending();
+	do {
+		/* we're in a chained irq handler,
+		 * so ack the interrupt by hand */
+		GEDR(VIPER_CPLD_GPIO) = GPIO_bit(VIPER_CPLD_GPIO);
+
+		if (likely(pending)) {
+			irq = viper_bit_to_irq(__ffs(pending));
+			generic_handle_irq(irq);
+		}
+		pending = viper_irq_pending();
+	} while (pending);
+}
+
+static struct irq_chip viper_irq_chip = {
+	.name	= "ISA",
+	.ack	= viper_ack_irq,
+	.mask	= viper_mask_irq,
+	.unmask	= viper_unmask_irq
+};
+
+static void __init viper_init_irq(void)
+{
+	int level;
+	int isa_irq;
+
+	pxa25x_init_irq();
+
+	/* setup ISA IRQs */
+	for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) {
+		isa_irq = viper_bit_to_irq(level);
+		set_irq_chip(isa_irq, &viper_irq_chip);
+		set_irq_handler(isa_irq, handle_edge_irq);
+		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
+				viper_irq_handler);
+	set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
+
+#ifndef CONFIG_SERIAL_PXA
+	/*
+	 * 8250 doesn't support IRQ_TYPE being passed as part
+	 * of the plat_serial8250_port structure...
+	 */
+	set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
+#endif
+}
+
+/* Flat Panel */
+static struct pxafb_mode_info fb_mode_info[] = {
+	{
+		.pixclock	= 157500,
+
+		.xres		= 320,
+		.yres		= 240,
+
+		.bpp		= 16,
+
+		.hsync_len	= 63,
+		.left_margin	= 7,
+		.right_margin	= 13,
+
+		.vsync_len	= 20,
+		.upper_margin	= 0,
+		.lower_margin	= 0,
+
+		.sync		= 0,
+	},
+};
+
+static struct pxafb_mach_info fb_info = {
+	.modes			= fb_mode_info,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int viper_backlight_init(struct device *dev)
+{
+	int ret;
+
+	/* GPIO9 and 10 control FB backlight. Initialise to off */
+	ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
+	if (ret)
+		goto err_request_bckl;
+
+	ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
+	if (ret)
+		goto err_request_lcd;
+
+	ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
+	if (ret)
+		goto err_dir;
+
+	ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
+	if (ret)
+		goto err_dir;
+
+	return 0;
+
+err_dir:
+	gpio_free(VIPER_LCD_EN_GPIO);
+err_request_lcd:
+	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+err_request_bckl:
+	dev_err(dev, "Failed to setup LCD GPIOs\n");
+
+	return ret;
+}
+
+static int viper_backlight_notify(int brightness)
+{
+	gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
+	gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
+
+	return brightness;
+}
+
+static void viper_backlight_exit(struct device *dev)
+{
+	gpio_free(VIPER_LCD_EN_GPIO);
+	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+}
+
+static struct platform_pwm_backlight_data viper_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 1000000,
+	.init		= viper_backlight_init,
+	.notify		= viper_backlight_notify,
+	.exit		= viper_backlight_exit,
+};
+
+static struct platform_device viper_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent		= &pxa25x_device_pwm0.dev,
+		.platform_data	= &viper_backlight_data,
+	},
+};
+
+/* Ethernet */
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start  = VIPER_ETH_PHYS + 0x300,
+		.end    = VIPER_ETH_PHYS + 0x30f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gpio_to_irq(VIPER_ETH_GPIO),
+		.end    = gpio_to_irq(VIPER_ETH_GPIO),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+	[2] = {
+		.name	= "smc91x-data32",
+		.start  = VIPER_ETH_DATA_PHYS,
+		.end    = VIPER_ETH_DATA_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct smc91x_platdata viper_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
+	.dev		= {
+		.platform_data	= &viper_smc91x_info,
+	},
+};
+
+/* i2c */
+static struct i2c_gpio_platform_data i2c_bus_data = {
+	.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
+	.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
+	.udelay  = 10,
+	.timeout = 100,
+};
+
+static struct platform_device i2c_bus_device = {
+	.name		= "i2c-gpio",
+	.id		= 1, /* pxa2xx-i2c is bus 0, so start at 1 */
+	.dev = {
+		.platform_data = &i2c_bus_data,
+	}
+};
+
+static struct i2c_board_info __initdata viper_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1338", 0x68),
+	},
+};
+
+/*
+ * Serial configuration:
+ * You can either have the standard PXA ports driven by the PXA driver,
+ * or all the ports (PXA + 16850) driven by the 8250 driver.
+ * Choose your poison.
+ */
+
+static struct resource viper_serial_resources[] = {
+#ifndef CONFIG_SERIAL_PXA
+	{
+		.start	= 0x40100000,
+		.end	= 0x4010001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x40200000,
+		.end	= 0x4020001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x40700000,
+		.end	= 0x4070001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= VIPER_UARTA_PHYS,
+		.end	= VIPER_UARTA_PHYS + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= VIPER_UARTB_PHYS,
+		.end	= VIPER_UARTB_PHYS + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+#else
+	{
+		0,
+	},
+#endif
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+#ifndef CONFIG_SERIAL_PXA
+	/* Internal UARTs */
+	{
+		.membase	= (void *)&FFUART,
+		.mapbase	= __PREG(FFUART),
+		.irq		= IRQ_FFUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{
+		.membase	= (void *)&BTUART,
+		.mapbase	= __PREG(BTUART),
+		.irq		= IRQ_BTUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{
+		.membase	= (void *)&STUART,
+		.mapbase	= __PREG(STUART),
+		.irq		= IRQ_STUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	/* External UARTs */
+	{
+		.mapbase	= VIPER_UARTA_PHYS,
+		.irq		= gpio_to_irq(VIPER_UARTA_GPIO),
+		.uartclk	= 1843200,
+		.regshift	= 1,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+				  UPF_SKIP_TEST,
+	},
+	{
+		.mapbase	= VIPER_UARTB_PHYS,
+		.irq		= gpio_to_irq(VIPER_UARTB_GPIO),
+		.uartclk	= 1843200,
+		.regshift	= 1,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+				  UPF_SKIP_TEST,
+	},
+#endif
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+	.num_resources		= ARRAY_SIZE(viper_serial_resources),
+	.resource		= viper_serial_resources,
+};
+
+/* USB */
+static void isp116x_delay(struct device *dev, int delay)
+{
+	ndelay(delay);
+}
+
+static struct resource isp116x_resources[] = {
+	[0] = { /* DATA */
+		.start  = VIPER_USB_PHYS + 0,
+		.end    = VIPER_USB_PHYS + 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = { /* ADDR */
+		.start  = VIPER_USB_PHYS + 2,
+		.end    = VIPER_USB_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = gpio_to_irq(VIPER_USB_GPIO),
+		.end    = gpio_to_irq(VIPER_USB_GPIO),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data isp116x_platform_data = {
+	/* Enable internal resistors on downstream ports */
+	.sel15Kres		= 1,
+	/* On-chip overcurrent protection */
+	.oc_enable		= 1,
+	/* INT output polarity */
+	.int_act_high		= 1,
+	/* INT edge or level triggered */
+	.int_edge_triggered	= 0,
+
+	/* WAKEUP pin connected - NOT SUPPORTED  */
+	/* .remote_wakeup_connected = 0, */
+	/* Wakeup by devices on usb bus enabled */
+	.remote_wakeup_enable	= 0,
+	.delay			= isp116x_delay,
+};
+
+static struct platform_device isp116x_device = {
+	.name			= "isp116x-hcd",
+	.id			= -1,
+	.num_resources  	= ARRAY_SIZE(isp116x_resources),
+	.resource       	= isp116x_resources,
+	.dev			= {
+		.platform_data	= &isp116x_platform_data,
+	},
+
+};
+
+/* MTD */
+static struct resource mtd_resources[] = {
+	[0] = {	/* RedBoot config + filesystem flash */
+		.start	= VIPER_FLASH_PHYS,
+		.end	= VIPER_FLASH_PHYS + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* Boot flash */
+		.start	= VIPER_BOOT_PHYS,
+		.end	= VIPER_BOOT_PHYS + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = { /*
+		 * SRAM size is actually 256KB, 8bits, with a sparse mapping
+		 * (each byte is on a 16bit boundary).
+		 */
+		.start	= _VIPER_SRAM_BASE,
+		.end	= _VIPER_SRAM_BASE + SZ_512K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition viper_boot_flash_partition = {
+	.name		= "RedBoot",
+	.size		= SZ_1M,
+	.offset		= 0,
+	.mask_flags	= MTD_WRITEABLE,	/* force R/O */
+};
+
+static struct physmap_flash_data viper_flash_data[] = {
+	[0] = {
+		.width		= 2,
+		.parts		= NULL,
+		.nr_parts	= 0,
+	},
+	[1] = {
+		.width		= 2,
+		.parts		= &viper_boot_flash_partition,
+		.nr_parts	= 1,
+	},
+};
+
+static struct platform_device viper_mtd_devices[] = {
+	[0] = {
+		.name		= "physmap-flash",
+		.id		= 0,
+		.dev		= {
+			.platform_data	= &viper_flash_data[0],
+		},
+		.resource	= &mtd_resources[0],
+		.num_resources	= 1,
+	},
+	[1] = {
+		.name		= "physmap-flash",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &viper_flash_data[1],
+		},
+		.resource	= &mtd_resources[1],
+		.num_resources	= 1,
+	},
+};
+
+static struct platform_device *viper_devs[] __initdata = {
+	&smc91x_device,
+	&i2c_bus_device,
+	&serial_device,
+	&isp116x_device,
+	&viper_mtd_devices[0],
+	&viper_mtd_devices[1],
+	&viper_backlight_device,
+};
+
+static mfp_cfg_t viper_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+
+	/* FP Backlight */
+	GPIO9_GPIO, 				/* VIPER_BCKLIGHT_EN_GPIO */
+	GPIO10_GPIO,				/* VIPER_LCD_EN_GPIO */
+	GPIO16_PWM0_OUT,
+
+	/* Ethernet PHY Ready */
+	GPIO18_RDY,
+
+	/* Serial shutdown */
+	GPIO12_GPIO | MFP_LPM_DRIVE_HIGH,	/* VIPER_UART_SHDN_GPIO */
+
+	/* Compact-Flash / PC104 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO8_GPIO,				/* VIPER_CF_RDY_GPIO */
+	GPIO32_GPIO,				/* VIPER_CF_CD_GPIO */
+	GPIO82_GPIO,				/* VIPER_CF_POWER_GPIO */
+
+	/* Integrated UPS control */
+	GPIO20_GPIO,				/* VIPER_UPS_GPIO */
+
+	/* Vcc regulator control */
+	GPIO6_GPIO,				/* VIPER_PSU_DATA_GPIO */
+	GPIO11_GPIO,				/* VIPER_PSU_CLK_GPIO */
+	GPIO19_GPIO,				/* VIPER_PSU_nCS_LD_GPIO */
+
+	/* i2c busses */
+	GPIO26_GPIO,				/* VIPER_TPM_I2C_SDA_GPIO */
+	GPIO27_GPIO,				/* VIPER_TPM_I2C_SCL_GPIO */
+	GPIO83_GPIO,				/* VIPER_RTC_I2C_SDA_GPIO */
+	GPIO84_GPIO,				/* VIPER_RTC_I2C_SCL_GPIO */
+
+	/* PC/104 Interrupt */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* VIPER_CPLD_GPIO */
+};
+
+static unsigned long viper_tpm;
+
+static int __init viper_tpm_setup(char *str)
+{
+	strict_strtoul(str, 10, &viper_tpm);
+	return 1;
+}
+
+__setup("tpm=", viper_tpm_setup);
+
+static void __init viper_tpm_init(void)
+{
+	struct platform_device *tpm_device;
+	struct i2c_gpio_platform_data i2c_tpm_data = {
+		.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
+		.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
+		.udelay  = 10,
+		.timeout = 100,
+	};
+	char *errstr;
+
+	/* Allocate TPM i2c bus if requested */
+	if (!viper_tpm)
+		return;
+
+	tpm_device = platform_device_alloc("i2c-gpio", 2);
+	if (tpm_device) {
+		if (!platform_device_add_data(tpm_device,
+					      &i2c_tpm_data,
+					      sizeof(i2c_tpm_data))) {
+			if (platform_device_add(tpm_device)) {
+				errstr = "register TPM i2c bus";
+				goto error_free_tpm;
+			}
+		} else {
+			errstr = "allocate TPM i2c bus data";
+			goto error_free_tpm;
+		}
+	} else {
+		errstr = "allocate TPM i2c device";
+		goto error_tpm;
+	}
+
+	return;
+
+error_free_tpm:
+	kfree(tpm_device);
+error_tpm:
+	pr_err("viper: Couldn't %s, giving up\n", errstr);
+}
+
+static void __init viper_init_vcore_gpios(void)
+{
+	if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
+		goto err_request_data;
+
+	if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
+		goto err_request_clk;
+
+	if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
+		goto err_request_cs;
+
+	if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
+	    gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
+	    gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
+		goto err_dir;
+
+	/* c/should assume redboot set the correct level ??? */
+	viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
+
+	return;
+
+err_dir:
+	gpio_free(VIPER_PSU_nCS_LD_GPIO);
+err_request_cs:
+	gpio_free(VIPER_PSU_CLK_GPIO);
+err_request_clk:
+	gpio_free(VIPER_PSU_DATA_GPIO);
+err_request_data:
+	pr_err("viper: Failed to setup vcore control GPIOs\n");
+}
+
+static void __init viper_init_serial_gpio(void)
+{
+	if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
+		goto err_request;
+
+	if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
+		goto err_dir;
+
+	return;
+
+err_dir:
+	gpio_free(VIPER_UART_SHDN_GPIO);
+err_request:
+	pr_err("viper: Failed to setup UART shutdown GPIO\n");
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int viper_cpufreq_notifier(struct notifier_block *nb,
+				  unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freq = data;
+
+	/* TODO: Adjust timings??? */
+
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if (freq->old < freq->new) {
+			/* we are getting faster so raise the voltage
+			 * before we change freq */
+			viper_set_core_cpu_voltage(freq->new, 0);
+		}
+		break;
+	case CPUFREQ_POSTCHANGE:
+		if (freq->old > freq->new) {
+			/* we are slowing down so drop the power
+			 * after we change freq */
+			viper_set_core_cpu_voltage(freq->new, 0);
+		}
+		break;
+	case CPUFREQ_RESUMECHANGE:
+		viper_set_core_cpu_voltage(freq->new, 0);
+		break;
+	default:
+		/* ignore */
+		break;
+	}
+
+	return 0;
+}
+
+static struct notifier_block viper_cpufreq_notifier_block = {
+	.notifier_call  = viper_cpufreq_notifier
+};
+
+static void __init viper_init_cpufreq(void)
+{
+	if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
+				      CPUFREQ_TRANSITION_NOTIFIER))
+		pr_err("viper: Failed to setup cpufreq notifier\n");
+}
+#else
+static inline void viper_init_cpufreq(void) {}
+#endif
+
+static void viper_power_off(void)
+{
+	pr_notice("Shutting off UPS\n");
+	gpio_set_value(VIPER_UPS_GPIO, 1);
+	/* Spin to death... */
+	while (1);
+}
+
+static void __init viper_init(void)
+{
+	u8 version;
+
+	pm_power_off = viper_power_off;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
+
+	/* Wake-up serial console */
+	viper_init_serial_gpio();
+
+	set_pxa_fb_info(&fb_info);
+
+	/* v1 hardware cannot use the datacs line */
+	version = viper_hw_version();
+	if (version == 0)
+		smc91x_device.num_resources--;
+
+	pxa_set_i2c_info(NULL);
+	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
+
+	viper_init_vcore_gpios();
+	viper_init_cpufreq();
+
+	sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
+
+	if (version) {
+		pr_info("viper: hardware v%di%d detected. "
+			"CPLD revision %d.\n",
+			VIPER_BOARD_VERSION(version),
+			VIPER_BOARD_ISSUE(version),
+			VIPER_CPLD_REVISION(version));
+		system_rev = (VIPER_BOARD_VERSION(version) << 8) |
+			     (VIPER_BOARD_ISSUE(version) << 4) |
+			     VIPER_CPLD_REVISION(version);
+	} else {
+		pr_info("viper: No version register.\n");
+	}
+
+	i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
+
+	viper_tpm_init();
+	pxa_set_ac97_info(NULL);
+}
+
+static struct map_desc viper_io_desc[] __initdata = {
+	{
+		.virtual = VIPER_CPLD_BASE,
+		.pfn     = __phys_to_pfn(VIPER_CPLD_PHYS),
+		.length  = 0x00300000,
+		.type    = MT_DEVICE,
+	},
+	{
+		.virtual = VIPER_PC104IO_BASE,
+		.pfn     = __phys_to_pfn(_PCMCIA1IO),
+		.length  = 0x00800000,
+		.type    = MT_DEVICE,
+	},
+};
+
+static void __init viper_map_io(void)
+{
+	pxa_map_io();
+
+	iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
+
+	PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
+	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= viper_map_io,
+	.init_irq	= viper_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine	= viper_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 0cb65b5..8138044 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -29,6 +29,7 @@
 #include <mach/pxafb.h>
 #include <mach/zylonite.h>
 #include <mach/mmc.h>
+#include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 
@@ -423,6 +424,21 @@ static void __init zylonite_init_nand(void)
 static inline void zylonite_init_nand(void) {}
 #endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
 
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data zylonite_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init zylonite_init_ohci(void)
+{
+	pxa_set_ohci_info(&zylonite_ohci_info);
+}
+#else
+static inline void zylonite_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
 static void __init zylonite_init(void)
 {
 	/* board-processor specific initialization */
@@ -443,6 +459,7 @@ static void __init zylonite_init(void)
 	zylonite_init_keypad();
 	zylonite_init_nand();
 	zylonite_init_leds();
+	zylonite_init_ohci();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 095f5c6..4653888 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -73,6 +73,12 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO27_AC97_SDATA_OUT,
 	GPIO28_AC97_SYNC,
 
+	/* SSP3 */
+	GPIO91_SSP3_SCLK,
+	GPIO92_SSP3_FRM,
+	GPIO93_SSP3_TXD,
+	GPIO94_SSP3_RXD,
+
 	/* WM9713 IRQ */
 	GPIO26_GPIO,
 
@@ -113,6 +119,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO13_MMC2_CLK,
 	GPIO14_MMC2_CMD,
 
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
@@ -209,7 +219,7 @@ static struct pca953x_platform_data gpio_exp[] = {
 	},
 };
 
-struct i2c_board_info zylonite_i2c_board_info[] = {
+static struct i2c_board_info zylonite_i2c_board_info[] = {
 	{
 		.type		= "pca9539",
 		.addr		= 0x74,
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 9879d7d..0f24474 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -69,6 +69,12 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO39_AC97_BITCLK,
 	GPIO40_AC97_nACRESET,
 
+	/* SSP3 */
+	GPIO89_SSP3_SCLK,
+	GPIO90_SSP3_FRM,
+	GPIO91_SSP3_TXD,
+	GPIO92_SSP3_RXD,
+
 	/* WM9713 IRQ */
 	GPIO15_GPIO,
 
@@ -117,6 +123,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO28_MMC2_CLK,
 	GPIO29_MMC2_CMD,
 
+	/* USB Host */
+	GPIO2_2_USBH_PEN,
+	GPIO3_2_USBH_PWR,
+
 	/* Debug LEDs */
 	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
 	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 4f9c84a..2f04d54 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -27,10 +27,10 @@
 #include <linux/amba/clcd.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/hardware/arm_timer.h>
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 33dbbb4..3cea92c 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -23,9 +23,9 @@
 #define __ASM_ARCH_REALVIEW_H
 
 #include <linux/amba/bus.h>
+#include <linux/io.h>
 
 #include <asm/leds.h>
-#include <asm/io.h>
 
 #define AMBA_DEVICE(name,busid,base,plat)			\
 static struct amba_device name##_device = {			\
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index 4d3c8f3..a2f61c7 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -21,8 +21,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <mach/platform.h>
 
 static inline void arch_idle(void)
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 82fa1f2..44d178c 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -17,11 +17,11 @@
 #include <linux/percpu.h>
 #include <linux/clockchips.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 
 #include <asm/hardware/arm_twd.h>
 #include <asm/hardware/gic.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
 static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 1907d22..e102aeb 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -13,10 +13,10 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/smp.h>
+#include <linux/io.h>
 
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach-types.h>
 
 #include <mach/board-eb.h>
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 19a9968..eb829eb 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,9 +23,9 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 0986cbd..cccdb3e 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -23,9 +23,9 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index f4e7135..8b86314 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -23,9 +23,9 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 4b19fe4..7958a30 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -14,11 +14,11 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
+#include <linux/io.h>
 
 #include <asm/page.h>
 #include <asm/dma.h>
 #include <asm/fiq.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/uaccess.h>
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
index 05425d5..9bf7e43 100644
--- a/arch/arm/mach-rpc/include/mach/memory.h
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -36,4 +36,12 @@
 #define FLUSH_BASE_PHYS		0x00000000
 #define FLUSH_BASE		0xdf000000
 
+/*
+ * Sparsemem support.  Each section is a maximum of 64MB.  The sections
+ * are offset by 128MB and can cover 128MB, so that gives us a maximum
+ * of 29 physmem bits.
+ */
+#define MAX_PHYSMEM_BITS	29
+#define SECTION_SIZE_BITS	26
+
 #endif
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
index 54d6e3f..bd7268ba 100644
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -7,9 +7,9 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
-#include <asm/io.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index baa9c866..d586236 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -9,8 +9,8 @@
  */
 #define VIDMEM ((char *)SCREEN_START)
  
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/page.h>
 
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index 7a02962..9dd15d6 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -1,10 +1,10 @@
 #include <linux/init.h>
 #include <linux/list.h>
+#include <linux/io.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/iomd.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 static void iomd_ack_irq_a(unsigned int irq)
 {
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index ce8470fea..e88d417 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -18,9 +18,9 @@
 #include <linux/device.h>
 #include <linux/serial_8250.h>
 #include <linux/ata_platform.h>
+#include <linux/io.h>
 
 #include <asm/elf.h>
-#include <asm/io.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 148d0dd..7a7ed417 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -24,10 +24,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <mach/regs-gpio.h>
 
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index c66021b..9a37c87 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -25,12 +25,12 @@
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <asm/mach-types.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
@@ -38,7 +38,7 @@
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
 
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/irq.h>
 
 #if 0
 #include <asm/debug-ll.h>
@@ -130,8 +130,7 @@ bast_irq_pc104_demux(unsigned int irq,
 		for (i = 0; stat != 0; i++, stat >>= 1) {
 			if (stat & 1) {
 				irqno = bast_pc104_irqs[i];
-				desc = irq_desc + irqno;
-				desc_handle_irq(irqno, desc);
+				generic_handle_irq(irqno);
 			}
 		}
 	}
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 1322851..4e07943 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -31,19 +31,19 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/io.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2410.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 int s3c2410_clkcon_enable(struct clk *clk, int enable)
 {
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 8730797..7d914a4 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -20,10 +20,10 @@
 #include <asm/dma.h>
 #include <mach/dma.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
 #include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index c6eefb1..36a3132 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -25,10 +25,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <mach/regs-gpio.h>
 
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 682df23..4c29a89 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
@@ -99,4 +99,4 @@
 
 /* include the reset of the code which will do the work */
 
-#include <asm/plat-s3c/debug-macro.S>
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 64bf7e9..23c470c 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -13,7 +13,7 @@
 #ifndef __ASM_ARCH_MAP_H
 #define __ASM_ARCH_MAP_H
 
-#include <asm/plat-s3c/map.h>
+#include <plat/map.h>
 
 #define S3C2410_ADDR(x)		S3C_ADDR(x)
 
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 921b13b..46d46f5 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -18,6 +18,7 @@ struct s3c2410_spi_info {
 	unsigned int		 num_cs;	/* total chipselects */
 	int			 bus_num;       /* bus number to use. */
 
+	void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable);
 	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
 
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index ec2defe..43535a0 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -11,7 +11,7 @@
 */
 
 #include <mach/hardware.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <asm/plat-s3c/regs-watchdog.h>
 #include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
index e9f676b..a8cbca6 100644
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -10,8 +10,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 #include <mach/map.h>
 #include <mach/idle.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index 708e474..ab39491 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -21,7 +21,7 @@
 #undef S3C2410_GPIOREG
 #define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
 
-#include <asm/plat-s3c/uncompress.h>
+#include <plat/uncompress.h>
 
 static inline int is_arm926(void)
 {
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index f5c5c53..9215039 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -25,8 +25,8 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 static int s3c2410_irq_add(struct sys_device *sysdev)
 {
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index f0de3c2..d061fea 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -36,6 +36,7 @@
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
 #include <linux/serial_core.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -43,17 +44,16 @@
 #include <asm/mach/flash.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <mach/fb.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 24c6334..8db9c70 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -22,6 +22,7 @@
 #include <linux/dm9000.h>
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
+#include <linux/io.h>
 
 #include <net/ax88796.h>
 
@@ -34,12 +35,11 @@
 #include <mach/bast-cpld.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
@@ -55,9 +55,9 @@
 
 #include <linux/serial_8250.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index e35933a..98716d0 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -20,17 +20,17 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
@@ -40,10 +40,10 @@
 #include <mach/fb.h>
 #include <asm/plat-s3c24xx/udc.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 80fe2ed..8250551 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -25,9 +25,9 @@
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/timer.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -41,12 +41,12 @@
 #include <asm/mach/map.h>
 
 #include <asm/plat-s3c/iic.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s3c2410.h>
 #include <asm/plat-s3c24xx/udc.h>
 
 static struct map_desc n30_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 606ee15..d8255cf 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -25,17 +26,16 @@
 #include <mach/otom-map.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 static struct map_desc otom11_iodesc[] __initdata = {
   /* Device area */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 7d34844..661807e 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -32,7 +32,7 @@
 #include <linux/serial_core.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
-
+#include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
@@ -43,23 +43,22 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/leds-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/fb.h>
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c24xx/udc.h>
 #include <mach/spi.h>
 #include <mach/spi-gpio.h>
 
-#include <asm/plat-s3c24xx/common-smdk.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/common-smdk.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 static struct map_desc qt2410_iodesc[] __initdata = {
 	{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index b88939d..152527b 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -36,22 +36,22 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c24xx/common-smdk.h>
+#include <plat/common-smdk.h>
 
 static struct map_desc smdk2410_iodesc[] __initdata = {
   /* nothing here yet */
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index ec87306..309dcf4 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -33,6 +33,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -40,13 +41,12 @@
 #include <asm/mach/flash.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/regs-serial.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index fbc0213..941353a 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -25,6 +25,7 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -36,17 +37,16 @@
 #include <mach/vr1000-cpld.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/leds-gpio.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index ba43ff9..a6970f6 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,17 +25,17 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/h1940.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 #ifdef CONFIG_S3C2410_PM_DEBUG
 extern void pm_dbg(const char *fmt, ...);
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 5d977f9..ac79b53 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -19,22 +19,22 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/clock.h>
+#include <plat/s3c2410.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
 
 /* Initial IO mappings */
 
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index be37f22..dd5b638 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -32,7 +32,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-mem.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
 	/* s3c2410_cpu_suspend
 	 *
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 4dacf8a..6078f09 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -21,6 +21,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,10 +33,9 @@
 #include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/devs.h>
 #include "usb-simtec.h"
 
 /* control power and monitor over-current events on various Simtec
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index af4b2ce..96d9eb1 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -31,19 +31,19 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/io.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/s3c2412.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2412.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 /* We currently have to assume that the system is running
  * from the XTPll input, and that all ***REFCLKs are being
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 22fc04a..ba0591e 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -16,15 +16,15 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
+#include <linux/io.h>
 
 #include <asm/dma.h>
 #include <mach/dma.h>
-#include <asm/io.h>
 
-#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/dma.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
 #include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index ac62b79..6000ca9 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -24,10 +24,10 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
@@ -35,9 +35,9 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-power.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/irq.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/irq.h>
+#include <plat/pm.h>
 
 #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
 #define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
@@ -123,10 +123,10 @@ static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
 	subsrc  &= ~submsk;
 
 	if (subsrc & INTBIT(IRQ_S3C2412_SDI))
-		desc_handle_irq(IRQ_S3C2412_SDI, irq_desc + IRQ_S3C2412_SDI);
+		generic_handle_irq(IRQ_S3C2412_SDI);
 
 	if (subsrc & INTBIT(IRQ_S3C2412_CF))
-		desc_handle_irq(IRQ_S3C2412_CF, irq_desc + IRQ_S3C2412_CF);
+		generic_handle_irq(IRQ_S3C2412_CF);
 }
 
 #define INTMSK_CFSDI	(1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index ad980a1..b08f18c 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -30,7 +30,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
 
@@ -48,10 +48,10 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 #include <asm/plat-s3c24xx/udc.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 80affb1..c719b5a7 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -27,12 +28,11 @@
 #include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/setup.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -40,13 +40,13 @@
 #include <asm/plat-s3c24xx/udc.h>
 #include <mach/fb.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2412.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2412.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c24xx/common-smdk.h>
+#include <plat/common-smdk.h>
 
 static struct map_desc smdk2413_iodesc[] __initdata = {
 };
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 7a08b37..4cfa19a 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -17,7 +17,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
-
+#include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
@@ -29,11 +29,10 @@
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -42,11 +41,11 @@
 
 #include <asm/plat-s3c/nand.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2412.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2412.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 
 static struct map_desc vstms_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 737523a..217e9e4 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -18,9 +18,9 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include <mach/regs-power.h>
@@ -28,10 +28,10 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-dsc.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
-#include <asm/plat-s3c24xx/s3c2412.h>
+#include <plat/s3c2412.h>
 
 extern void s3c2412_sleep_enter(void);
 
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index d278010..313759c 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -20,6 +20,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -27,14 +28,13 @@
 
 #include <mach/hardware.h>
 #include <asm/proc-fns.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include <mach/reset.h>
 #include <mach/idle.h>
 
 #include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-gpioj.h>
@@ -42,11 +42,11 @@
 #include <asm/plat-s3c24xx/regs-spi.h>
 #include <mach/regs-s3c2412.h>
 
-#include <asm/plat-s3c24xx/s3c2412.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/s3c2412.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/pm.h>
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 95567e6..d1c29b2 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -33,16 +33,16 @@
 #include <linux/ioport.h>
 #include <linux/mutex.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <mach/regs-clock.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 /* S3C2440 extended clock support */
 
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index cdd4e6e..32303f6 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -20,10 +20,10 @@
 #include <asm/dma.h>
 #include <mach/dma.h>
 
-#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/dma.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
 #include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index c0c6743..5540442 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -15,20 +15,20 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-dsc.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/cpu.h>
+#include <plat/s3c2440.h>
 
 int s3c2440_set_dsc(unsigned int pin, unsigned int value)
 {
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 276b823..63c5ab65 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -24,19 +24,19 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
 
 /* WDT/AC97 */
 
@@ -44,7 +44,6 @@ static void s3c_irq_demux_wdtac97(unsigned int irq,
 				  struct irq_desc *desc)
 {
 	unsigned int subsrc, submsk;
-	struct irq_desc *mydesc;
 
 	/* read the current pending interrupts, and the mask
 	 * for what it is available */
@@ -58,12 +57,10 @@ static void s3c_irq_demux_wdtac97(unsigned int irq,
 
 	if (subsrc != 0) {
 		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_S3C2440_WDT;
-			desc_handle_irq(IRQ_S3C2440_WDT, mydesc);
+			generic_handle_irq(IRQ_S3C2440_WDT);
 		}
 		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_S3C2440_AC97;
-			desc_handle_irq(IRQ_S3C2440_AC97, mydesc);
+			generic_handle_irq(IRQ_S3C2440_AC97);
 		}
 	}
 }
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 441f4bc..e2beca4 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
-
+#include <linux/io.h>
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
 
@@ -32,11 +32,10 @@
 #include <mach/anubis-cpld.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
@@ -49,9 +48,9 @@
 
 #include <net/ax88796.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #define COPYRIGHT ", (c) 2005 Simtec Electronics"
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index f0f0cc6..66876c6 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -31,7 +31,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
@@ -42,9 +42,9 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 static struct map_desc at2440evb_iodesc[] __initdata = {
 	/* Nothing here */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 1a5e702..a546307 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -21,6 +21,7 @@
 #include <linux/string.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <linux/mtd/map.h>
 
@@ -30,19 +31,18 @@
 
 #include <asm/setup.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 static struct map_desc nexcoder_iodesc[] __initdata = {
 	/* nothing here yet */
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 8b83f93..2361d60 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -20,6 +20,7 @@
 #include <linux/serial_core.h>
 #include <linux/clk.h>
 #include <linux/i2c.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -29,11 +30,10 @@
 #include <mach/osiris-cpld.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
@@ -44,9 +44,9 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 /* onboard perihperal map */
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index e0b07e6..4d14c7c 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
-
+#include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
@@ -34,11 +34,10 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -46,10 +45,10 @@
 #include <asm/plat-s3c/nand.h>
 #include <mach/fb.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 static struct map_desc rx3715_iodesc[] __initdata = {
 	/* dump ISA space somewhere unused */
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 327c8f3..fefeaaa 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -21,30 +21,30 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
 #include <mach/idle.h>
 #include <mach/fb.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c24xx/common-smdk.h>
+#include <plat/common-smdk.h>
 
 static struct map_desc smdk2440_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index d6b9a92..ac1f7ea 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -20,18 +20,18 @@
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2440.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 static struct sys_device s3c2440_sysdev = {
 	.cls		= &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 569b5c3..ea1aa1f 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -33,16 +33,16 @@
 #include <linux/ioport.h>
 #include <linux/mutex.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <mach/regs-clock.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 /* S3C2442 extended clock support */
 
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
index fbf8264..4663bdc 100644
--- a/arch/arm/mach-s3c2442/s3c2442.c
+++ b/arch/arm/mach-s3c2442/s3c2442.c
@@ -19,8 +19,8 @@
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
 
-#include <asm/plat-s3c24xx/s3c2442.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2442.h>
+#include <plat/cpu.h>
 
 static struct sys_device s3c2442_sysdev = {
 	.cls		= &s3c2442_sysclass,
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 6a8d7cc..f854e73 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -31,17 +31,17 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/io.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 #include <mach/regs-s3c2443-clock.h>
 
-#include <asm/plat-s3c24xx/s3c2443.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2443.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 /* We currently have to assume that the system is running
  * from the XTPll input, and that all ***REFCLKs are being
@@ -1033,8 +1033,7 @@ void __init s3c2443_init_clocks(int xtal)
 
 	fclk = pll / s3c2443_fclk_div(clkdiv0);
 	hclk = s3c2443_prediv_getrate(&clk_prediv);
-	hclk = hclk / s3c2443_get_hdiv(clkdiv0);
-	hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
+	hclk /= s3c2443_get_hdiv(clkdiv0);
  	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
 
 	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index c1ff03a..f73ccb2 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -16,15 +16,15 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
+#include <linux/io.h>
 
 #include <asm/dma.h>
 #include <mach/dma.h>
-#include <asm/io.h>
 
-#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/dma.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
 #include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 9674de7..0e0d693 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -24,19 +24,19 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
 
 #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
 
@@ -44,7 +44,6 @@ static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
 {
 	unsigned int subsrc, submsk;
 	unsigned int end;
-	struct irq_desc *mydesc;
 
 	/* read the current pending interrupts, and the mask
 	 * for what it is available */
@@ -57,13 +56,11 @@ static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
 	subsrc  &= (1 << len)-1;
 
 	end = len + irq;
-	mydesc = irq_desc + irq;
 
 	for (; irq < end && subsrc; irq++) {
 		if (subsrc & 1)
-			desc_handle_irq(irq, mydesc);
+			generic_handle_irq(irq);
 
-		mydesc++;
 		subsrc >>= 1;
 	}
 }
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index e3c0d58..a7fe65f 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -21,30 +21,30 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
 #include <mach/idle.h>
 #include <mach/fb.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c24xx/common-smdk.h>
+#include <plat/common-smdk.h>
 
 static struct map_desc smdk2443_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 37793f9..bbeddf9 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -20,21 +20,21 @@
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include <mach/regs-s3c2443-clock.h>
 #include <mach/reset.h>
 
-#include <asm/plat-s3c24xx/s3c2443.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2443.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 3efefbd..ab5883b 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -95,19 +95,19 @@ static int __init badge4_sa1111_init(void)
  *   One-hundred-twenty-seven 32 KiW Main Blocks (8128 Ki b)
  */
 static struct mtd_partition badge4_partitions[] = {
-        {
-                .name           = "BLOB boot loader",
-                .offset         = 0,
-                .size           = 0x0000A000
-        }, {
-                .name           = "params",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = 0x00006000
-        }, {
-                .name           = "root",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = MTDPART_SIZ_FULL
-        }
+	{
+		.name	= "BLOB boot loader",
+		.offset	= 0,
+		.size	= 0x0000A000
+	}, {
+		.name	= "params",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 0x00006000
+	}, {
+		.name	= "root",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	}
 };
 
 static struct flash_platform_data badge4_flash_data = {
@@ -126,7 +126,7 @@ static int five_v_on __initdata = 0;
 
 static int __init five_v_on_setup(char *ignore)
 {
-        five_v_on = 1;
+	five_v_on = 1;
 	return 1;
 }
 __setup("five_v_on", five_v_on_setup);
@@ -171,15 +171,15 @@ static int __init badge4_init(void)
 	GPCR  = BADGE4_GPIO_TESTPT_J7;
 	GPDR |= BADGE4_GPIO_TESTPT_J7;
 
- 	/* 5V supply rail. */
- 	GPCR  = BADGE4_GPIO_PCMEN5V;		/* initially off */
-  	GPDR |= BADGE4_GPIO_PCMEN5V;
+	/* 5V supply rail. */
+	GPCR  = BADGE4_GPIO_PCMEN5V;		/* initially off */
+	GPDR |= BADGE4_GPIO_PCMEN5V;
 
 	/* CPLD sdram type inputs; set up by blob */
 	//GPDR |= (BADGE4_GPIO_SDTYP1 | BADGE4_GPIO_SDTYP0);
 	printk(KERN_DEBUG __FILE__ ": SDRAM CPLD typ1=%d typ0=%d\n",
-	       !!(GPLR & BADGE4_GPIO_SDTYP1),
-	       !!(GPLR & BADGE4_GPIO_SDTYP0));
+		!!(GPLR & BADGE4_GPIO_SDTYP1),
+		!!(GPLR & BADGE4_GPIO_SDTYP0));
 
 	/* SA1111 reset pin; set up by blob */
 	//GPSR  = BADGE4_GPIO_SA1111_NRST;
@@ -205,8 +205,8 @@ static int __init badge4_init(void)
 	ret = badge4_sa1111_init();
 	if (ret < 0)
 		printk(KERN_ERR
-		       "%s: SA-1111 initialization failed (%d)\n",
-		       __func__, ret);
+			"%s: SA-1111 initialization failed (%d)\n",
+			__func__, ret);
 
 
 	/* maybe turn on 5v0 from the start */
@@ -254,7 +254,7 @@ EXPORT_SYMBOL(badge4_set_5V);
 
 
 static struct map_desc badge4_io_desc[] __initdata = {
-  	{	/* SRAM  bank 1 */
+	{	/* SRAM  bank 1 */
 		.virtual	= 0xf1000000,
 		.pfn		= __phys_to_pfn(0x08000000),
 		.length		= 0x00100000,
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index da3a898..244d595 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -88,6 +88,8 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
+#include <asm/cputype.h>
+
 #include <mach/hardware.h>
 
 #include "generic.h"
@@ -222,7 +224,6 @@ static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
 	if (policy->cpu != 0)
 		return -EINVAL;
 	policy->cur = policy->min = policy->max = sa11x0_getspeed(0);
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 	policy->cpuinfo.min_freq = 59000;
 	policy->cpuinfo.max_freq = 287000;
 	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
@@ -240,7 +241,7 @@ static struct cpufreq_driver sa1100_driver = {
 
 static int __init sa1100_dram_init(void)
 {
- 	if ((processor_id & CPU_SA1100_MASK) == CPU_SA1100_ID)
+	if (cpu_is_sa1100())
 		return cpufreq_register_driver(&sa1100_driver);
 	else
 		return -ENODEV;
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 029dbfb..3e4fb21 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -23,10 +23,11 @@
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <asm/cputype.h>
 #include <asm/mach-types.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 1362994..c1fbd5b 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -18,9 +18,9 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>	/* just for sched_clock() - funny that */
 #include <linux/platform_device.h>
+#include <linux/cnt32_to_63.h>
 
 #include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
 #include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -42,7 +42,7 @@ EXPORT_SYMBOL(reset_status);
 static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
 	 590,	/*  59.0 MHz */
 	 737,	/*  73.7 MHz */
-	 885, 	/*  88.5 MHz */
+	 885,	/*  88.5 MHz */
 	1032,	/* 103.2 MHz */
 	1180,	/* 118.0 MHz */
 	1327,	/* 132.7 MHz */
@@ -52,10 +52,10 @@ static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
 	1917,	/* 191.7 MHz */
 	2064,	/* 206.4 MHz */
 	2212,	/* 221.2 MHz */
-	2359,   /* 235.9 MHz */
-	2507,   /* 250.7 MHz */
-	2654,   /* 265.4 MHz */
-	2802    /* 280.2 MHz */
+	2359,	/* 235.9 MHz */
+	2507,	/* 250.7 MHz */
+	2654,	/* 265.4 MHz */
+	2802	/* 280.2 MHz */
 };
 
 #if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
@@ -113,7 +113,7 @@ unsigned int sa11x0_getspeed(unsigned int cpu)
 #else
 /*
  * We still need to provide this so building without cpufreq works.
- */ 
+ */
 unsigned int cpufreq_get(unsigned int cpu)
 {
 	return cclk_frequency_100khz[PPCR & 0xf] * 100;
@@ -389,7 +389,7 @@ EXPORT_SYMBOL(sa1100fb_lcd_power);
  */
 
 static struct map_desc standard_io_desc[] __initdata = {
-  	{	/* PCM */
+	{	/* PCM */
 		.virtual	=  0xf8000000,
 		.pfn		= __phys_to_pfn(0x80000000),
 		.length		= 0x00100000,
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 62aaf04..4f7ea01 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -2054,19 +2054,3 @@
                 	        	/* active display mode)            */
 #define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High      */
 #define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low       */
-
-#ifndef __ASSEMBLY__
-extern unsigned int processor_id;
-#endif
-
-#define CPU_REVISION	(processor_id & 15)
-#define CPU_SA1110_A0	(0)
-#define CPU_SA1110_B0	(4)
-#define CPU_SA1110_B1	(5)
-#define CPU_SA1110_B2	(6)
-#define CPU_SA1110_B4	(8)
-
-#define CPU_SA1100_ID	(0x4401a110)
-#define CPU_SA1100_MASK	(0xfffffff0)
-#define CPU_SA1110_ID	(0x6901b110)
-#define CPU_SA1110_MASK	(0xfffffff0)
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index 5976435..b70846c 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -36,8 +36,26 @@
 #define io_v2p( x )             \
    ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
 
+#define CPU_SA1110_A0	(0)
+#define CPU_SA1110_B0	(4)
+#define CPU_SA1110_B1	(5)
+#define CPU_SA1110_B2	(6)
+#define CPU_SA1110_B4	(8)
+
+#define CPU_SA1100_ID	(0x4401a110)
+#define CPU_SA1100_MASK	(0xfffffff0)
+#define CPU_SA1110_ID	(0x6901b110)
+#define CPU_SA1110_MASK	(0xfffffff0)
+
 #ifndef __ASSEMBLY__
 
+#include <asm/cputype.h>
+
+#define CPU_REVISION	(read_cpuid_id() & 15)
+
+#define cpu_is_sa1100()	((read_cpuid_id() & CPU_SA1100_MASK) == CPU_SA1100_ID)
+#define cpu_is_sa1110()	((read_cpuid_id() & CPU_SA1110_MASK) == CPU_SA1110_ID)
+
 # define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
 # define __PREG(x)	(io_v2p((unsigned long)&(x)))
 
diff --git a/arch/arm/mach-sa1100/include/mach/ide.h b/arch/arm/mach-sa1100/include/mach/ide.h
deleted file mode 100644
index 4c99c8f..0000000
--- a/arch/arm/mach-sa1100/include/mach/ide.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/ide.h
- *
- * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
- *
- * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *              Get rid of the special ide_init_hwif_ports() functions
- *              and make a generalised function that can be used by all
- *              architectures.
- */
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#error "This code is broken and needs update to match with current ide support"
-
-
-/*
- * Set up a hw structure for a specified data port, control port and IRQ.
- * This should follow whatever the default interface uses.
- */
-static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
-				       unsigned long ctrl_port, int *irq)
-{
-	unsigned long reg = data_port;
-	int i;
-	int regincr = 1;
-
-	/* The Empeg board has the first two address lines unused */
-	if (machine_is_empeg())
-		regincr = 1 << 2;
-
-	/* The LART doesn't use A0 for IDE */
-	if (machine_is_lart())
-		regincr = 1 << 1;
-
-	memset(hw, 0, sizeof(*hw));
-
-	for (i = 0; i <= 7; i++) {
-		hw->io_ports_array[i] = reg;
-		reg += regincr;
-	}
-
-	hw->io_ports.ctl_addr = ctrl_port;
-
-	if (irq)
-		*irq = 0;
-}
-
-/*
- * This registers the standard ports for this architecture with the IDE
- * driver.
- */
-static __inline__ void
-ide_init_default_hwifs(void)
-{
-    if (machine_is_lart()) {
-#ifdef CONFIG_SA1100_LART
-        hw_regs_t hw;
-
-        /* Enable GPIO as interrupt line */
-        GPDR &= ~LART_GPIO_IDE;
-	set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
-
-        /* set PCMCIA interface timing */
-        MECR = 0x00060006;
-
-        /* init the interface */
-	ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
-        hw.irq = LART_IRQ_IDE;
-        ide_register_hw(&hw);
-#endif
-    }
-}
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index 29f639e..1c127b6 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -40,23 +40,21 @@ void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
 #define __bus_to_virt(x)	 __phys_to_virt(x)
 
 /*
- * Because of the wide memory address space between physical RAM banks on the 
- * SA1100, it's much convenient to use Linux's NUMA support to implement our 
- * memory map representation.  Assuming all memory nodes have equal access 
+ * Because of the wide memory address space between physical RAM banks on the
+ * SA1100, it's much convenient to use Linux's SparseMEM support to implement
+ * our memory map representation.  Assuming all memory nodes have equal access
  * characteristics, we then have generic discontiguous memory support.
  *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are 
- * incidentally the same as virtual addresses.
+ * The sparsemem banks are matched with the physical memory bank addresses
+ * which are incidentally the same as virtual addresses.
  * 
  * 	node 0:  0xc0000000 - 0xc7ffffff
  * 	node 1:  0xc8000000 - 0xcfffffff
  * 	node 2:  0xd0000000 - 0xd7ffffff
  * 	node 3:  0xd8000000 - 0xdfffffff
  */
-#define NODE_MEM_SIZE_BITS	27
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	27
 
 /*
  * Cache flushing area - SA1100 zero bank
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 86369a8..3093d46 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -122,14 +122,12 @@ sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc)
 		GEDR = mask;
 
 		irq = IRQ_GPIO11;
-		desc = irq_desc + irq;
 		mask >>= 11;
 		do {
 			if (mask & 1)
-				desc_handle_irq(irq, desc);
+				generic_handle_irq(irq);
 			mask >>= 1;
 			irq++;
-			desc++;
 		} while (mask);
 
 		mask = GEDR & 0xfffff800;
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 4856a6b..6ccd175 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -33,8 +33,6 @@ neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
 	unsigned int irr;
 
 	while (1) {
-		struct irq_desc *d;
-
 		/*
 		 * Acknowledge the parent IRQ.
 		 */
@@ -67,21 +65,18 @@ neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
 			desc->chip->ack(irq);
 
 			if (irr & IRR_ETHERNET) {
-				d = irq_desc + IRQ_NEPONSET_SMC9196;
-				desc_handle_irq(IRQ_NEPONSET_SMC9196, d);
+				generic_handle_irq(IRQ_NEPONSET_SMC9196);
 			}
 
 			if (irr & IRR_USAR) {
-				d = irq_desc + IRQ_NEPONSET_USAR;
-				desc_handle_irq(IRQ_NEPONSET_USAR, d);
+				generic_handle_irq(IRQ_NEPONSET_USAR);
 			}
 
 			desc->chip->unmask(irq);
 		}
 
 		if (irr & IRR_SA1111) {
-			d = irq_desc + IRQ_NEPONSET_SA1111;
-			desc_handle_irq(IRQ_NEPONSET_SA1111, d);
+			generic_handle_irq(IRQ_NEPONSET_SA1111);
 		}
 	}
 }
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 83be1c6..e45d3a1 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -8,11 +8,10 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
-
+#include <linux/io.h>
 #include <linux/mtd/partitions.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 
@@ -39,8 +38,8 @@
 
 static struct resource smc91x_resources[] = {
 	[0] = {
-		.start	=  PLEB_ETH0_P,
-		.end	=  PLEB_ETH0_P | 0x03ffffff,
+		.start	= PLEB_ETH0_P,
+		.end	= PLEB_ETH0_P | 0x03ffffff,
 		.flags	= IORESOURCE_MEM,
 	},
 #if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */
@@ -87,15 +86,15 @@ static struct resource pleb_flash_resources[] = {
 static struct mtd_partition pleb_partitions[] = {
 	{
 		.name		= "blob",
-		.offset 	= 0,
+		.offset		= 0,
 		.size		= 0x00020000,
 	}, {
 		.name		= "kernel",
-		.offset 	= MTDPART_OFS_APPEND,
+		.offset		= MTDPART_OFS_APPEND,
 		.size		= 0x000e0000,
 	}, {
 		.name		= "rootfs",
-		.offset 	= MTDPART_OFS_APPEND,
+		.offset		= MTDPART_OFS_APPEND,
 		.size		= 0x00300000,
 	}
 };
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 8dd6353..3c74534 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/io.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -27,7 +28,6 @@
 
 #include <linux/serial_core.h>
 #include <linux/ioport.h>
-#include <asm/io.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index 641f361..b20ff93 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -17,8 +17,8 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/hardware/ssp.h>
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 09d9f33..a9400d9 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -9,10 +9,10 @@
 #include <linux/irq.h>
 #include <linux/sched.h>
 #include <linux/serial_8250.h>
+#include <linux/io.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/param.h>
 
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
index 85aceef..e45bd73 100644
--- a/arch/arm/mach-shark/include/mach/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -6,7 +6,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/io.h>
+#include <linux/io.h>
 
 static void arch_reset(char mode)
 {
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 44b0811..c04eb6a 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -11,9 +11,9 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/mach/irq.h>
 
 /*
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index b189647..8bd8d6b 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -20,10 +20,10 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/leds.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #define LED_STATE_ENABLED	1
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index d75e795..565e0ba 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,11 +28,11 @@
 #include <linux/amba/clcd.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/io.h>
 
-#include <asm/cnt32_to_63.h>
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/hardware/arm_timer.h>
@@ -95,8 +95,7 @@ sic_handle_irq(unsigned int irq, struct irq_desc *desc)
 
 		irq += IRQ_SIC_START;
 
-		desc = irq_desc + irq;
-		desc_handle_irq(irq, desc);
+		generic_handle_irq(irq);
 	} while (status);
 }
 
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
index 91fa559..c59e610 100644
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -21,8 +21,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <mach/platform.h>
 
 static inline void arch_idle(void)
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 36f23f8..7161ba2 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -21,9 +21,9 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index 76375c6..bb8ec77 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -23,9 +23,9 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 1725f01..aa051c0 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -23,9 +23,9 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index ed15f87..ab5f7a2 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -400,9 +400,9 @@ config CPU_FEROCEON_OLD_ID
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor"
-	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
 	default y if ARCH_MX3
-	default y if ARCH_MSM7X00A
+	default y if ARCH_MSM
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_NOIFAR
@@ -428,7 +428,7 @@ config CPU_32v6K
 # ARMv7
 config CPU_V7
 	bool "Support ARM V7 processor"
-	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP3
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
@@ -735,6 +735,14 @@ config CACHE_FEROCEON_L2
 	help
 	  This option enables the Feroceon L2 cache controller.
 
+config CACHE_FEROCEON_L2_WRITETHROUGH
+	bool "Force Feroceon L2 cache write through"
+	depends on CACHE_FEROCEON_L2
+	default n
+	help
+	  Say Y here to use the Feroceon L2 cache in writethrough mode.
+	  Unless you specifically require this, say N for writeback mode.
+
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 2e27a8c..480f78a 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux arm-specific parts of the memory manager.
 #
 
-obj-y				:= consistent.o extable.o fault.o init.o \
+obj-y				:= dma-mapping.o extable.o fault.o init.o \
 				   iomap.o
 
 obj-$(CONFIG_MMU)		+= fault-armv.o flush.o ioremap.o mmap.o \
diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S
index eb90bce..2e6dc04 100644
--- a/arch/arm/mm/abort-ev7.S
+++ b/arch/arm/mm/abort-ev7.S
@@ -30,3 +30,4 @@ ENTRY(v7_early_abort)
 	 * New designs should not need to patch up faults.
 	 */
 	mov	pc, lr
+ENDPROC(v7_early_abort)
diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S
index a7cc7f9e..625e580 100644
--- a/arch/arm/mm/abort-nommu.S
+++ b/arch/arm/mm/abort-nommu.S
@@ -17,3 +17,4 @@ ENTRY(nommu_early_abort)
 	mov	r0, #0				@ clear r0, r1 (no FSR/FAR)
 	mov	r1, #0
 	mov	pc, lr
+ENDPROC(nommu_early_abort)
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index e162cca..133e65d 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -17,8 +17,8 @@
 #include <linux/string.h>
 #include <linux/proc_fs.h>
 #include <linux/init.h>
+#include <linux/uaccess.h>
 
-#include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
 #include "fault.h"
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 7b5a25d..13cdae8 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -48,11 +48,12 @@ static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
 	 * L2 is PIPT and range operations only do a TLB lookup on
 	 * the start address.
 	 */
-	BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
+	BUG_ON((start ^ end) >> PAGE_SHIFT);
 
 	raw_local_irq_save(flags);
-	__asm__("mcr p15, 1, %0, c15, c9, 4" : : "r" (start));
-	__asm__("mcr p15, 1, %0, c15, c9, 5" : : "r" (end));
+	__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
+		"mcr p15, 1, %1, c15, c9, 5"
+		: : "r" (start), "r" (end));
 	raw_local_irq_restore(flags);
 }
 
@@ -80,11 +81,12 @@ static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
 	 * L2 is PIPT and range operations only do a TLB lookup on
 	 * the start address.
 	 */
-	BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
+	BUG_ON((start ^ end) >> PAGE_SHIFT);
 
 	raw_local_irq_save(flags);
-	__asm__("mcr p15, 1, %0, c15, c11, 4" : : "r" (start));
-	__asm__("mcr p15, 1, %0, c15, c11, 5" : : "r" (end));
+	__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
+		"mcr p15, 1, %1, c15, c11, 5"
+		: : "r" (start), "r" (end));
 	raw_local_irq_restore(flags);
 }
 
@@ -205,7 +207,7 @@ static void feroceon_l2_flush_range(unsigned long start, unsigned long end)
  * time.  These are necessary because the L2 cache can only be enabled
  * or disabled while the L1 Dcache and Icache are both disabled.
  */
-static void __init invalidate_and_disable_dcache(void)
+static int __init flush_and_disable_dcache(void)
 {
 	u32 cr;
 
@@ -217,7 +219,9 @@ static void __init invalidate_and_disable_dcache(void)
 		flush_cache_all();
 		set_cr(cr & ~CR_C);
 		raw_local_irq_restore(flags);
+		return 1;
 	}
+	return 0;
 }
 
 static void __init enable_dcache(void)
@@ -225,18 +229,17 @@ static void __init enable_dcache(void)
 	u32 cr;
 
 	cr = get_cr();
-	if (!(cr & CR_C))
-		set_cr(cr | CR_C);
+	set_cr(cr | CR_C);
 }
 
 static void __init __invalidate_icache(void)
 {
 	int dummy;
 
-	__asm__ __volatile__("mcr p15, 0, %0, c7, c5, 0\n" : "=r" (dummy));
+	__asm__ __volatile__("mcr p15, 0, %0, c7, c5, 0" : "=r" (dummy));
 }
 
-static void __init invalidate_and_disable_icache(void)
+static int __init invalidate_and_disable_icache(void)
 {
 	u32 cr;
 
@@ -244,7 +247,9 @@ static void __init invalidate_and_disable_icache(void)
 	if (cr & CR_I) {
 		set_cr(cr & ~CR_I);
 		__invalidate_icache();
+		return 1;
 	}
+	return 0;
 }
 
 static void __init enable_icache(void)
@@ -252,8 +257,7 @@ static void __init enable_icache(void)
 	u32 cr;
 
 	cr = get_cr();
-	if (!(cr & CR_I))
-		set_cr(cr | CR_I);
+	set_cr(cr | CR_I);
 }
 
 static inline u32 read_extra_features(void)
@@ -291,13 +295,17 @@ static void __init enable_l2(void)
 
 	u = read_extra_features();
 	if (!(u & 0x00400000)) {
+		int i, d;
+
 		printk(KERN_INFO "Feroceon L2: Enabling L2\n");
 
-		invalidate_and_disable_dcache();
-		invalidate_and_disable_icache();
+		d = flush_and_disable_dcache();
+		i = invalidate_and_disable_icache();
 		write_extra_features(u | 0x00400000);
-		enable_icache();
-		enable_dcache();
+		if (i)
+			enable_icache();
+		if (d)
+			enable_dcache();
 	}
 }
 
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 76b800a..b480f1d 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -18,9 +18,9 @@
  */
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/io.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #define CACHE_LINE_SIZE		32
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 33926c9..5786adf1 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -29,7 +29,7 @@ ENTRY(v4_flush_user_cache_all)
  *	Clean and invalidate the entire cache.
  */
 ENTRY(v4_flush_kern_cache_all)
-#ifdef CPU_CP15
+#ifdef CONFIG_CPU_CP15
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
 	mov	pc, lr
@@ -48,7 +48,7 @@ ENTRY(v4_flush_kern_cache_all)
  *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v4_flush_user_cache_range)
-#ifdef CPU_CP15
+#ifdef CONFIG_CPU_CP15
 	mov	ip, #0
 	mcreq	p15, 0, ip, c7, c7, 0		@ flush ID cache
 	mov	pc, lr
@@ -116,7 +116,7 @@ ENTRY(v4_dma_inv_range)
  *	- end	 - virtual end address
  */
 ENTRY(v4_dma_flush_range)
-#ifdef CPU_CP15
+#ifdef CONFIG_CPU_CP15
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
 #endif
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 35ffc4d..d19c2be 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -66,6 +66,7 @@ finished:
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
 	isb
 	mov	pc, lr
+ENDPROC(v7_flush_dcache_all)
 
 /*
  *	v7_flush_cache_all()
@@ -85,6 +86,7 @@ ENTRY(v7_flush_kern_cache_all)
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
 	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}
 	mov	pc, lr
+ENDPROC(v7_flush_kern_cache_all)
 
 /*
  *	v7_flush_cache_all()
@@ -110,6 +112,8 @@ ENTRY(v7_flush_user_cache_all)
  */
 ENTRY(v7_flush_user_cache_range)
 	mov	pc, lr
+ENDPROC(v7_flush_user_cache_all)
+ENDPROC(v7_flush_user_cache_range)
 
 /*
  *	v7_coherent_kern_range(start,end)
@@ -155,6 +159,8 @@ ENTRY(v7_coherent_user_range)
 	dsb
 	isb
 	mov	pc, lr
+ENDPROC(v7_coherent_kern_range)
+ENDPROC(v7_coherent_user_range)
 
 /*
  *	v7_flush_kern_dcache_page(kaddr)
@@ -174,6 +180,7 @@ ENTRY(v7_flush_kern_dcache_page)
 	blo	1b
 	dsb
 	mov	pc, lr
+ENDPROC(v7_flush_kern_dcache_page)
 
 /*
  *	v7_dma_inv_range(start,end)
@@ -202,6 +209,7 @@ ENTRY(v7_dma_inv_range)
 	blo	1b
 	dsb
 	mov	pc, lr
+ENDPROC(v7_dma_inv_range)
 
 /*
  *	v7_dma_clean_range(start,end)
@@ -219,6 +227,7 @@ ENTRY(v7_dma_clean_range)
 	blo	1b
 	dsb
 	mov	pc, lr
+ENDPROC(v7_dma_clean_range)
 
 /*
  *	v7_dma_flush_range(start,end)
@@ -236,6 +245,7 @@ ENTRY(v7_dma_flush_range)
 	blo	1b
 	dsb
 	mov	pc, lr
+ENDPROC(v7_dma_flush_range)
 
 	__INITDATA
 
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index 158bd96..10b1bae 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -18,10 +18,11 @@
  */
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
+#include <asm/cputype.h>
 #include <asm/cacheflush.h>
-#include <asm/io.h>
 
 #define CR_L2	(1 << 26)
 
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
deleted file mode 100644
index db7b3e3..0000000
--- a/arch/arm/mm/consistent.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- *  linux/arch/arm/mm/consistent.c
- *
- *  Copyright (C) 2000-2004 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  DMA uncached mapping support.
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/memory.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/sizes.h>
-
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-
-#define CONSISTENT_END	(0xffe00000)
-#define CONSISTENT_BASE	(CONSISTENT_END - CONSISTENT_DMA_SIZE)
-
-#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
-
-
-/*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
- */
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
-static DEFINE_SPINLOCK(consistent_lock);
-
-/*
- * VM region handling support.
- *
- * This should become something generic, handling VM region allocations for
- * vmalloc and similar (ioremap, module space, etc).
- *
- * I envisage vmalloc()'s supporting vm_struct becoming:
- *
- *  struct vm_struct {
- *    struct vm_region	region;
- *    unsigned long	flags;
- *    struct page	**pages;
- *    unsigned int	nr_pages;
- *    unsigned long	phys_addr;
- *  };
- *
- * get_vm_area() would then call vm_region_alloc with an appropriate
- * struct vm_region head (eg):
- *
- *  struct vm_region vmalloc_head = {
- *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
- *	.vm_start	= VMALLOC_START,
- *	.vm_end		= VMALLOC_END,
- *  };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vm_region_alloc().
- */
-struct vm_region {
-	struct list_head	vm_list;
-	unsigned long		vm_start;
-	unsigned long		vm_end;
-	struct page		*vm_pages;
-	int			vm_active;
-};
-
-static struct vm_region consistent_head = {
-	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
-	.vm_start	= CONSISTENT_BASE,
-	.vm_end		= CONSISTENT_END,
-};
-
-static struct vm_region *
-vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
-{
-	unsigned long addr = head->vm_start, end = head->vm_end - size;
-	unsigned long flags;
-	struct vm_region *c, *new;
-
-	new = kmalloc(sizeof(struct vm_region), gfp);
-	if (!new)
-		goto out;
-
-	spin_lock_irqsave(&consistent_lock, flags);
-
-	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if ((addr + size) < addr)
-			goto nospc;
-		if ((addr + size) <= c->vm_start)
-			goto found;
-		addr = c->vm_end;
-		if (addr > end)
-			goto nospc;
-	}
-
- found:
-	/*
-	 * Insert this entry _before_ the one we found.
-	 */
-	list_add_tail(&new->vm_list, &c->vm_list);
-	new->vm_start = addr;
-	new->vm_end = addr + size;
-	new->vm_active = 1;
-
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	return new;
-
- nospc:
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	kfree(new);
- out:
-	return NULL;
-}
-
-static struct vm_region *vm_region_find(struct vm_region *head, unsigned long addr)
-{
-	struct vm_region *c;
-	
-	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if (c->vm_active && c->vm_start == addr)
-			goto out;
-	}
-	c = NULL;
- out:
-	return c;
-}
-
-#ifdef CONFIG_HUGETLB_PAGE
-#error ARM Coherent DMA allocator does not (yet) support huge TLB
-#endif
-
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
-	    pgprot_t prot)
-{
-	struct page *page;
-	struct vm_region *c;
-	unsigned long order;
-	u64 mask = ISA_DMA_THRESHOLD, limit;
-
-	if (!consistent_pte[0]) {
-		printk(KERN_ERR "%s: not initialised\n", __func__);
-		dump_stack();
-		return NULL;
-	}
-
-	if (dev) {
-		mask = dev->coherent_dma_mask;
-
-		/*
-		 * Sanity check the DMA mask - it must be non-zero, and
-		 * must be able to be satisfied by a DMA allocation.
-		 */
-		if (mask == 0) {
-			dev_warn(dev, "coherent DMA mask is unset\n");
-			goto no_page;
-		}
-
-		if ((~mask) & ISA_DMA_THRESHOLD) {
-			dev_warn(dev, "coherent DMA mask %#llx is smaller "
-				 "than system GFP_DMA mask %#llx\n",
-				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
-			goto no_page;
-		}
-	}
-
-	/*
-	 * Sanity check the allocation size.
-	 */
-	size = PAGE_ALIGN(size);
-	limit = (mask + 1) & ~mask;
-	if ((limit && size >= limit) ||
-	    size >= (CONSISTENT_END - CONSISTENT_BASE)) {
-		printk(KERN_WARNING "coherent allocation too big "
-		       "(requested %#x mask %#llx)\n", size, mask);
-		goto no_page;
-	}
-
-	order = get_order(size);
-
-	if (mask != 0xffffffff)
-		gfp |= GFP_DMA;
-
-	page = alloc_pages(gfp, order);
-	if (!page)
-		goto no_page;
-
-	/*
-	 * Invalidate any data that might be lurking in the
-	 * kernel direct-mapped region for device DMA.
-	 */
-	{
-		void *ptr = page_address(page);
-		memset(ptr, 0, size);
-		dmac_flush_range(ptr, ptr + size);
-		outer_flush_range(__pa(ptr), __pa(ptr) + size);
-	}
-
-	/*
-	 * Allocate a virtual address in the consistent mapping region.
-	 */
-	c = vm_region_alloc(&consistent_head, size,
-			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
-	if (c) {
-		pte_t *pte;
-		struct page *end = page + (1 << order);
-		int idx = CONSISTENT_PTE_INDEX(c->vm_start);
-		u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-
-		pte = consistent_pte[idx] + off;
-		c->vm_pages = page;
-
-		split_page(page, order);
-
-		/*
-		 * Set the "dma handle"
-		 */
-		*handle = page_to_dma(dev, page);
-
-		do {
-			BUG_ON(!pte_none(*pte));
-
-			/*
-			 * x86 does not mark the pages reserved...
-			 */
-			SetPageReserved(page);
-			set_pte_ext(pte, mk_pte(page, prot), 0);
-			page++;
-			pte++;
-			off++;
-			if (off >= PTRS_PER_PTE) {
-				off = 0;
-				pte = consistent_pte[++idx];
-			}
-		} while (size -= PAGE_SIZE);
-
-		/*
-		 * Free the otherwise unused pages.
-		 */
-		while (page < end) {
-			__free_page(page);
-			page++;
-		}
-
-		return (void *)c->vm_start;
-	}
-
-	if (page)
-		__free_pages(page, order);
- no_page:
-	*handle = ~0;
-	return NULL;
-}
-
-/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
- */
-void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	void *memory;
-
-	if (dma_alloc_from_coherent(dev, size, handle, &memory))
-		return memory;
-
-	if (arch_is_coherent()) {
-		void *virt;
-
-		virt = kmalloc(size, gfp);
-		if (!virt)
-			return NULL;
-		*handle =  virt_to_dma(dev, virt);
-
-		return virt;
-	}
-
-	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_noncached(pgprot_kernel));
-}
-EXPORT_SYMBOL(dma_alloc_coherent);
-
-/*
- * Allocate a writecombining region, in much the same way as
- * dma_alloc_coherent above.
- */
-void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_writecombine(pgprot_kernel));
-}
-EXPORT_SYMBOL(dma_alloc_writecombine);
-
-static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
-		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	unsigned long flags, user_size, kern_size;
-	struct vm_region *c;
-	int ret = -ENXIO;
-
-	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
-
-	spin_lock_irqsave(&consistent_lock, flags);
-	c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
-	if (c) {
-		unsigned long off = vma->vm_pgoff;
-
-		kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
-
-		if (off < kern_size &&
-		    user_size <= (kern_size - off)) {
-			ret = remap_pfn_range(vma, vma->vm_start,
-					      page_to_pfn(c->vm_pages) + off,
-					      user_size << PAGE_SHIFT,
-					      vma->vm_page_prot);
-		}
-	}
-
-	return ret;
-}
-
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
-		      void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_coherent);
-
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
-			  void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_writecombine);
-
-/*
- * free a page as defined by the above mapping.
- * Must not be called with IRQs disabled.
- */
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
-	struct vm_region *c;
-	unsigned long flags, addr;
-	pte_t *ptep;
-	int idx;
-	u32 off;
-
-	WARN_ON(irqs_disabled());
-
-	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
-		return;
-
-	if (arch_is_coherent()) {
-		kfree(cpu_addr);
-		return;
-	}
-
-	size = PAGE_ALIGN(size);
-
-	spin_lock_irqsave(&consistent_lock, flags);
-	c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-	if (!c)
-		goto no_area;
-
-	c->vm_active = 0;
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
-	if ((c->vm_end - c->vm_start) != size) {
-		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
-		       __func__, c->vm_end - c->vm_start, size);
-		dump_stack();
-		size = c->vm_end - c->vm_start;
-	}
-
-	idx = CONSISTENT_PTE_INDEX(c->vm_start);
-	off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-	ptep = consistent_pte[idx] + off;
-	addr = c->vm_start;
-	do {
-		pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
-		unsigned long pfn;
-
-		ptep++;
-		addr += PAGE_SIZE;
-		off++;
-		if (off >= PTRS_PER_PTE) {
-			off = 0;
-			ptep = consistent_pte[++idx];
-		}
-
-		if (!pte_none(pte) && pte_present(pte)) {
-			pfn = pte_pfn(pte);
-
-			if (pfn_valid(pfn)) {
-				struct page *page = pfn_to_page(pfn);
-
-				/*
-				 * x86 does not mark the pages reserved...
-				 */
-				ClearPageReserved(page);
-
-				__free_page(page);
-				continue;
-			}
-		}
-
-		printk(KERN_CRIT "%s: bad page in kernel page table\n",
-		       __func__);
-	} while (size -= PAGE_SIZE);
-
-	flush_tlb_kernel_range(c->vm_start, c->vm_end);
-
-	spin_lock_irqsave(&consistent_lock, flags);
-	list_del(&c->vm_list);
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
-	kfree(c);
-	return;
-
- no_area:
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
-	       __func__, cpu_addr);
-	dump_stack();
-}
-EXPORT_SYMBOL(dma_free_coherent);
-
-/*
- * Initialise the consistent memory allocation.
- */
-static int __init consistent_init(void)
-{
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	int ret = 0, i = 0;
-	u32 base = CONSISTENT_BASE;
-
-	do {
-		pgd = pgd_offset(&init_mm, base);
-		pmd = pmd_alloc(&init_mm, pgd, base);
-		if (!pmd) {
-			printk(KERN_ERR "%s: no pmd tables\n", __func__);
-			ret = -ENOMEM;
-			break;
-		}
-		WARN_ON(!pmd_none(*pmd));
-
-		pte = pte_alloc_kernel(pmd, base);
-		if (!pte) {
-			printk(KERN_ERR "%s: no pte tables\n", __func__);
-			ret = -ENOMEM;
-			break;
-		}
-
-		consistent_pte[i++] = pte;
-		base += (1 << PGDIR_SHIFT);
-	} while (base < CONSISTENT_END);
-
-	return ret;
-}
-
-core_initcall(consistent_init);
-
-/*
- * Make an area consistent for devices.
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
- */
-void dma_cache_maint(const void *start, size_t size, int direction)
-{
-	const void *end = start + size;
-
-	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
-
-	switch (direction) {
-	case DMA_FROM_DEVICE:		/* invalidate only */
-		dmac_inv_range(start, end);
-		outer_inv_range(__pa(start), __pa(end));
-		break;
-	case DMA_TO_DEVICE:		/* writeback only */
-		dmac_clean_range(start, end);
-		outer_clean_range(__pa(start), __pa(end));
-		break;
-	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
-		dmac_flush_range(start, end);
-		outer_flush_range(__pa(start), __pa(end));
-		break;
-	default:
-		BUG();
-	}
-}
-EXPORT_SYMBOL(dma_cache_maint);
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index ded0e96..8d33e25 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -28,7 +28,7 @@
  * specific hacks for copying pages efficiently.
  */
 #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
-				  L_PTE_CACHEABLE)
+				  L_PTE_MT_MINICACHE)
 
 static DEFINE_SPINLOCK(minicache_lock);
 
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 3adb792..0e21c07 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -16,6 +16,7 @@
 #include <asm/shmparam.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
+#include <asm/cachetype.h>
 
 #include "mm.h"
 
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 2e455f8..bad4933 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -30,7 +30,7 @@
 #define COPYPAGE_MINICACHE	0xffff8000
 
 #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
-				  L_PTE_CACHEABLE)
+				  L_PTE_MT_MINICACHE)
 
 static DEFINE_SPINLOCK(minicache_lock);
 
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
new file mode 100644
index 0000000..6796001
--- /dev/null
+++ b/arch/arm/mm/dma-mapping.c
@@ -0,0 +1,616 @@
+/*
+ *  linux/arch/arm/mm/dma-mapping.c
+ *
+ *  Copyright (C) 2000-2004 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  DMA uncached mapping support.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/memory.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/sizes.h>
+
+/* Sanity check size */
+#if (CONSISTENT_DMA_SIZE % SZ_2M)
+#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
+#endif
+
+#define CONSISTENT_END	(0xffe00000)
+#define CONSISTENT_BASE	(CONSISTENT_END - CONSISTENT_DMA_SIZE)
+
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
+#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
+
+/*
+ * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ */
+static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+static DEFINE_SPINLOCK(consistent_lock);
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ *  struct vm_struct {
+ *    struct vm_region	region;
+ *    unsigned long	flags;
+ *    struct page	**pages;
+ *    unsigned int	nr_pages;
+ *    unsigned long	phys_addr;
+ *  };
+ *
+ * get_vm_area() would then call vm_region_alloc with an appropriate
+ * struct vm_region head (eg):
+ *
+ *  struct vm_region vmalloc_head = {
+ *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
+ *	.vm_start	= VMALLOC_START,
+ *	.vm_end		= VMALLOC_END,
+ *  };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vm_region_alloc().
+ */
+struct vm_region {
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+	struct page		*vm_pages;
+	int			vm_active;
+};
+
+static struct vm_region consistent_head = {
+	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
+	.vm_start	= CONSISTENT_BASE,
+	.vm_end		= CONSISTENT_END,
+};
+
+static struct vm_region *
+vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
+{
+	unsigned long addr = head->vm_start, end = head->vm_end - size;
+	unsigned long flags;
+	struct vm_region *c, *new;
+
+	new = kmalloc(sizeof(struct vm_region), gfp);
+	if (!new)
+		goto out;
+
+	spin_lock_irqsave(&consistent_lock, flags);
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if ((addr + size) < addr)
+			goto nospc;
+		if ((addr + size) <= c->vm_start)
+			goto found;
+		addr = c->vm_end;
+		if (addr > end)
+			goto nospc;
+	}
+
+ found:
+	/*
+	 * Insert this entry _before_ the one we found.
+	 */
+	list_add_tail(&new->vm_list, &c->vm_list);
+	new->vm_start = addr;
+	new->vm_end = addr + size;
+	new->vm_active = 1;
+
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	return new;
+
+ nospc:
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	kfree(new);
+ out:
+	return NULL;
+}
+
+static struct vm_region *vm_region_find(struct vm_region *head, unsigned long addr)
+{
+	struct vm_region *c;
+	
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if (c->vm_active && c->vm_start == addr)
+			goto out;
+	}
+	c = NULL;
+ out:
+	return c;
+}
+
+#ifdef CONFIG_HUGETLB_PAGE
+#error ARM Coherent DMA allocator does not (yet) support huge TLB
+#endif
+
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+	    pgprot_t prot)
+{
+	struct page *page;
+	struct vm_region *c;
+	unsigned long order;
+	u64 mask = ISA_DMA_THRESHOLD, limit;
+
+	if (!consistent_pte[0]) {
+		printk(KERN_ERR "%s: not initialised\n", __func__);
+		dump_stack();
+		return NULL;
+	}
+
+	if (dev) {
+		mask = dev->coherent_dma_mask;
+
+		/*
+		 * Sanity check the DMA mask - it must be non-zero, and
+		 * must be able to be satisfied by a DMA allocation.
+		 */
+		if (mask == 0) {
+			dev_warn(dev, "coherent DMA mask is unset\n");
+			goto no_page;
+		}
+
+		if ((~mask) & ISA_DMA_THRESHOLD) {
+			dev_warn(dev, "coherent DMA mask %#llx is smaller "
+				 "than system GFP_DMA mask %#llx\n",
+				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
+			goto no_page;
+		}
+	}
+
+	/*
+	 * Sanity check the allocation size.
+	 */
+	size = PAGE_ALIGN(size);
+	limit = (mask + 1) & ~mask;
+	if ((limit && size >= limit) ||
+	    size >= (CONSISTENT_END - CONSISTENT_BASE)) {
+		printk(KERN_WARNING "coherent allocation too big "
+		       "(requested %#x mask %#llx)\n", size, mask);
+		goto no_page;
+	}
+
+	order = get_order(size);
+
+	if (mask != 0xffffffff)
+		gfp |= GFP_DMA;
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		goto no_page;
+
+	/*
+	 * Invalidate any data that might be lurking in the
+	 * kernel direct-mapped region for device DMA.
+	 */
+	{
+		void *ptr = page_address(page);
+		memset(ptr, 0, size);
+		dmac_flush_range(ptr, ptr + size);
+		outer_flush_range(__pa(ptr), __pa(ptr) + size);
+	}
+
+	/*
+	 * Allocate a virtual address in the consistent mapping region.
+	 */
+	c = vm_region_alloc(&consistent_head, size,
+			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+	if (c) {
+		pte_t *pte;
+		struct page *end = page + (1 << order);
+		int idx = CONSISTENT_PTE_INDEX(c->vm_start);
+		u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+
+		pte = consistent_pte[idx] + off;
+		c->vm_pages = page;
+
+		split_page(page, order);
+
+		/*
+		 * Set the "dma handle"
+		 */
+		*handle = page_to_dma(dev, page);
+
+		do {
+			BUG_ON(!pte_none(*pte));
+
+			/*
+			 * x86 does not mark the pages reserved...
+			 */
+			SetPageReserved(page);
+			set_pte_ext(pte, mk_pte(page, prot), 0);
+			page++;
+			pte++;
+			off++;
+			if (off >= PTRS_PER_PTE) {
+				off = 0;
+				pte = consistent_pte[++idx];
+			}
+		} while (size -= PAGE_SIZE);
+
+		/*
+		 * Free the otherwise unused pages.
+		 */
+		while (page < end) {
+			__free_page(page);
+			page++;
+		}
+
+		return (void *)c->vm_start;
+	}
+
+	if (page)
+		__free_pages(page, order);
+ no_page:
+	*handle = ~0;
+	return NULL;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+	void *memory;
+
+	if (dma_alloc_from_coherent(dev, size, handle, &memory))
+		return memory;
+
+	if (arch_is_coherent()) {
+		void *virt;
+
+		virt = kmalloc(size, gfp);
+		if (!virt)
+			return NULL;
+		*handle =  virt_to_dma(dev, virt);
+
+		return virt;
+	}
+
+	return __dma_alloc(dev, size, handle, gfp,
+			   pgprot_noncached(pgprot_kernel));
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+/*
+ * Allocate a writecombining region, in much the same way as
+ * dma_alloc_coherent above.
+ */
+void *
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+	return __dma_alloc(dev, size, handle, gfp,
+			   pgprot_writecombine(pgprot_kernel));
+}
+EXPORT_SYMBOL(dma_alloc_writecombine);
+
+static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
+		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+	unsigned long flags, user_size, kern_size;
+	struct vm_region *c;
+	int ret = -ENXIO;
+
+	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+
+	spin_lock_irqsave(&consistent_lock, flags);
+	c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
+	spin_unlock_irqrestore(&consistent_lock, flags);
+
+	if (c) {
+		unsigned long off = vma->vm_pgoff;
+
+		kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
+
+		if (off < kern_size &&
+		    user_size <= (kern_size - off)) {
+			ret = remap_pfn_range(vma, vma->vm_start,
+					      page_to_pfn(c->vm_pages) + off,
+					      user_size << PAGE_SHIFT,
+					      vma->vm_page_prot);
+		}
+	}
+
+	return ret;
+}
+
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+		      void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+EXPORT_SYMBOL(dma_mmap_coherent);
+
+int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
+			  void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+EXPORT_SYMBOL(dma_mmap_writecombine);
+
+/*
+ * free a page as defined by the above mapping.
+ * Must not be called with IRQs disabled.
+ */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+	struct vm_region *c;
+	unsigned long flags, addr;
+	pte_t *ptep;
+	int idx;
+	u32 off;
+
+	WARN_ON(irqs_disabled());
+
+	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+		return;
+
+	if (arch_is_coherent()) {
+		kfree(cpu_addr);
+		return;
+	}
+
+	size = PAGE_ALIGN(size);
+
+	spin_lock_irqsave(&consistent_lock, flags);
+	c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
+	if (!c)
+		goto no_area;
+
+	c->vm_active = 0;
+	spin_unlock_irqrestore(&consistent_lock, flags);
+
+	if ((c->vm_end - c->vm_start) != size) {
+		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+		       __func__, c->vm_end - c->vm_start, size);
+		dump_stack();
+		size = c->vm_end - c->vm_start;
+	}
+
+	idx = CONSISTENT_PTE_INDEX(c->vm_start);
+	off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+	ptep = consistent_pte[idx] + off;
+	addr = c->vm_start;
+	do {
+		pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
+		unsigned long pfn;
+
+		ptep++;
+		addr += PAGE_SIZE;
+		off++;
+		if (off >= PTRS_PER_PTE) {
+			off = 0;
+			ptep = consistent_pte[++idx];
+		}
+
+		if (!pte_none(pte) && pte_present(pte)) {
+			pfn = pte_pfn(pte);
+
+			if (pfn_valid(pfn)) {
+				struct page *page = pfn_to_page(pfn);
+
+				/*
+				 * x86 does not mark the pages reserved...
+				 */
+				ClearPageReserved(page);
+
+				__free_page(page);
+				continue;
+			}
+		}
+
+		printk(KERN_CRIT "%s: bad page in kernel page table\n",
+		       __func__);
+	} while (size -= PAGE_SIZE);
+
+	flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+	spin_lock_irqsave(&consistent_lock, flags);
+	list_del(&c->vm_list);
+	spin_unlock_irqrestore(&consistent_lock, flags);
+
+	kfree(c);
+	return;
+
+ no_area:
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+	       __func__, cpu_addr);
+	dump_stack();
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+/*
+ * Initialise the consistent memory allocation.
+ */
+static int __init consistent_init(void)
+{
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	int ret = 0, i = 0;
+	u32 base = CONSISTENT_BASE;
+
+	do {
+		pgd = pgd_offset(&init_mm, base);
+		pmd = pmd_alloc(&init_mm, pgd, base);
+		if (!pmd) {
+			printk(KERN_ERR "%s: no pmd tables\n", __func__);
+			ret = -ENOMEM;
+			break;
+		}
+		WARN_ON(!pmd_none(*pmd));
+
+		pte = pte_alloc_kernel(pmd, base);
+		if (!pte) {
+			printk(KERN_ERR "%s: no pte tables\n", __func__);
+			ret = -ENOMEM;
+			break;
+		}
+
+		consistent_pte[i++] = pte;
+		base += (1 << PGDIR_SHIFT);
+	} while (base < CONSISTENT_END);
+
+	return ret;
+}
+
+core_initcall(consistent_init);
+
+/*
+ * Make an area consistent for devices.
+ * Note: Drivers should NOT use this function directly, as it will break
+ * platforms with CONFIG_DMABOUNCE.
+ * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ */
+void dma_cache_maint(const void *start, size_t size, int direction)
+{
+	const void *end = start + size;
+
+	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
+
+	switch (direction) {
+	case DMA_FROM_DEVICE:		/* invalidate only */
+		dmac_inv_range(start, end);
+		outer_inv_range(__pa(start), __pa(end));
+		break;
+	case DMA_TO_DEVICE:		/* writeback only */
+		dmac_clean_range(start, end);
+		outer_clean_range(__pa(start), __pa(end));
+		break;
+	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
+		dmac_flush_range(start, end);
+		outer_flush_range(__pa(start), __pa(end));
+		break;
+	default:
+		BUG();
+	}
+}
+EXPORT_SYMBOL(dma_cache_maint);
+
+/**
+ * dma_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * This is the scatter-gather version of the dma_map_single interface.
+ * Here the scatter gather list elements are each tagged with the
+ * appropriate dma address and length.  They are obtained via
+ * sg_dma_{address,length}.
+ *
+ * Device ownership issues as mentioned for dma_map_single are the same
+ * here.
+ */
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+		enum dma_data_direction dir)
+{
+	struct scatterlist *s;
+	int i, j;
+
+	for_each_sg(sg, s, nents, i) {
+		s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
+						s->length, dir);
+		if (dma_mapping_error(dev, s->dma_address))
+			goto bad_mapping;
+	}
+	return nents;
+
+ bad_mapping:
+	for_each_sg(sg, s, i, j)
+		dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
+	return 0;
+}
+EXPORT_SYMBOL(dma_map_sg);
+
+/**
+ * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to unmap (returned from dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ *
+ * Unmap a set of streaming mode DMA translations.  Again, CPU access
+ * rules concerning calls here are the same as for dma_unmap_single().
+ */
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
+		enum dma_data_direction dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i)
+		dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
+}
+EXPORT_SYMBOL(dma_unmap_sg);
+
+/**
+ * dma_sync_sg_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map (returned from dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ */
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+			int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i) {
+		dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
+					sg_dma_len(s), dir);
+	}
+}
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+
+/**
+ * dma_sync_sg_for_device
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map (returned from dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ */
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+			int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i) {
+		if (!dmabounce_sync_for_device(dev, sg_dma_address(s), 0,
+					sg_dma_len(s), dir))
+			continue;
+
+		if (!arch_is_coherent())
+			dma_cache_maint(sg_virt(s), s->length, dir);
+	}
+}
+EXPORT_SYMBOL(dma_sync_sg_for_device);
diff --git a/arch/arm/mm/extable.c b/arch/arm/mm/extable.c
index 9592c3e..9d28562 100644
--- a/arch/arm/mm/extable.c
+++ b/arch/arm/mm/extable.c
@@ -2,7 +2,7 @@
  *  linux/arch/arm/mm/extable.c
  */
 #include <linux/module.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 int fixup_exception(struct pt_regs *regs)
 {
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index a8ec97b..81d0b87 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -17,11 +17,13 @@
 #include <linux/init.h>
 #include <linux/pagemap.h>
 
+#include <asm/bugs.h>
 #include <asm/cacheflush.h>
+#include <asm/cachetype.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
-static unsigned long shared_pte_mask = L_PTE_CACHEABLE;
+static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
 
 /*
  * We take the easy way out of this problem - we make the
@@ -63,9 +65,10 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	 * If this page isn't present, or is already setup to
 	 * fault (ie, is old), we can safely ignore any issues.
 	 */
-	if (ret && pte_val(entry) & shared_pte_mask) {
+	if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
 		flush_cache_page(vma, address, pte_pfn(entry));
-		pte_val(entry) &= ~shared_pte_mask;
+		pte_val(entry) &= ~L_PTE_MT_MASK;
+		pte_val(entry) |= shared_pte_mask;
 		set_pte_at(vma->vm_mm, address, pte, entry);
 		flush_tlb_page(vma, address);
 	}
@@ -197,7 +200,7 @@ void __init check_writebuffer_bugs(void)
 		unsigned long *p1, *p2;
 		pgprot_t prot = __pgprot(L_PTE_PRESENT|L_PTE_YOUNG|
 					 L_PTE_DIRTY|L_PTE_WRITE|
-					 L_PTE_BUFFERABLE);
+					 L_PTE_MT_BUFFERABLE);
 
 		p1 = vmap(&page, 1, VM_IOREMAP, prot);
 		p2 = vmap(&page, 1, VM_IOREMAP, prot);
@@ -218,7 +221,7 @@ void __init check_writebuffer_bugs(void)
 
 	if (v) {
 		printk("failed, %s\n", reason);
-		shared_pte_mask |= L_PTE_BUFFERABLE;
+		shared_pte_mask = L_PTE_MT_UNCACHED;
 	} else {
 		printk("ok\n");
 	}
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 28ad7ab..2df8d9f 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -13,11 +13,11 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/kprobes.h>
+#include <linux/uaccess.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
-#include <asm/uaccess.h>
 
 #include "fault.h"
 
@@ -72,9 +72,8 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 		}
 
 		pmd = pmd_offset(pgd, addr);
-#if PTRS_PER_PMD != 1
-		printk(", *pmd=%08lx", pmd_val(*pmd));
-#endif
+		if (PTRS_PER_PMD != 1)
+			printk(", *pmd=%08lx", pmd_val(*pmd));
 
 		if (pmd_none(*pmd))
 			break;
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 029ee65..0fa9bf3 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -12,6 +12,7 @@
 #include <linux/pagemap.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cachetype.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
 
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 30a69d6..82c4b42 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -26,9 +26,42 @@
 
 #include "mm.h"
 
-extern void _text, _etext, __data_start, _end, __init_begin, __init_end;
-extern unsigned long phys_initrd_start;
-extern unsigned long phys_initrd_size;
+static unsigned long phys_initrd_start __initdata = 0;
+static unsigned long phys_initrd_size __initdata = 0;
+
+static void __init early_initrd(char **p)
+{
+	unsigned long start, size;
+
+	start = memparse(*p, p);
+	if (**p == ',') {
+		size = memparse((*p) + 1, p);
+
+		phys_initrd_start = start;
+		phys_initrd_size = size;
+	}
+}
+__early_param("initrd=", early_initrd);
+
+static int __init parse_tag_initrd(const struct tag *tag)
+{
+	printk(KERN_WARNING "ATAG_INITRD is deprecated; "
+		"please update your bootloader.\n");
+	phys_initrd_start = __virt_to_phys(tag->u.initrd.start);
+	phys_initrd_size = tag->u.initrd.size;
+	return 0;
+}
+
+__tagtable(ATAG_INITRD, parse_tag_initrd);
+
+static int __init parse_tag_initrd2(const struct tag *tag)
+{
+	phys_initrd_start = tag->u.initrd.start;
+	phys_initrd_size = tag->u.initrd.size;
+	return 0;
+}
+
+__tagtable(ATAG_INITRD2, parse_tag_initrd2);
 
 /*
  * This is used to pass memory configuration data from paging_init
@@ -36,10 +69,6 @@ extern unsigned long phys_initrd_size;
  */
 static struct meminfo meminfo = { 0, };
 
-#define for_each_nodebank(iter,mi,no)			\
-	for (iter = 0; iter < mi->nr_banks; iter++)	\
-		if (mi->bank[iter].node == no)
-
 void show_mem(void)
 {
 	int free = 0, total = 0, reserved = 0;
@@ -50,14 +79,15 @@ void show_mem(void)
 	show_free_areas();
 	for_each_online_node(node) {
 		pg_data_t *n = NODE_DATA(node);
-		struct page *map = n->node_mem_map - n->node_start_pfn;
+		struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
 
 		for_each_nodebank (i,mi,node) {
+			struct membank *bank = &mi->bank[i];
 			unsigned int pfn1, pfn2;
 			struct page *page, *end;
 
-			pfn1 = __phys_to_pfn(mi->bank[i].start);
-			pfn2 = __phys_to_pfn(mi->bank[i].size + mi->bank[i].start);
+			pfn1 = bank_pfn_start(bank);
+			pfn2 = bank_pfn_end(bank);
 
 			page = map + pfn1;
 			end  = map + pfn2;
@@ -96,17 +126,17 @@ void show_mem(void)
 static unsigned int __init
 find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
 {
-	unsigned int start_pfn, bank, bootmap_pfn;
+	unsigned int start_pfn, i, bootmap_pfn;
 
 	start_pfn   = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT;
 	bootmap_pfn = 0;
 
-	for_each_nodebank(bank, mi, node) {
+	for_each_nodebank(i, mi, node) {
+		struct membank *bank = &mi->bank[i];
 		unsigned int start, end;
 
-		start = mi->bank[bank].start >> PAGE_SHIFT;
-		end   = (mi->bank[bank].size +
-			 mi->bank[bank].start) >> PAGE_SHIFT;
+		start = bank_pfn_start(bank);
+		end   = bank_pfn_end(bank);
 
 		if (end < start_pfn)
 			continue;
@@ -145,13 +175,10 @@ static int __init check_initrd(struct meminfo *mi)
 		initrd_node = -1;
 
 		for (i = 0; i < mi->nr_banks; i++) {
-			unsigned long bank_end;
-
-			bank_end = mi->bank[i].start + mi->bank[i].size;
-
-			if (mi->bank[i].start <= phys_initrd_start &&
-			    end <= bank_end)
-				initrd_node = mi->bank[i].node;
+			struct membank *bank = &mi->bank[i];
+			if (bank_phys_start(bank) <= phys_initrd_start &&
+			    end <= bank_phys_end(bank))
+				initrd_node = bank->node;
 		}
 	}
 
@@ -171,19 +198,17 @@ static inline void map_memory_bank(struct membank *bank)
 #ifdef CONFIG_MMU
 	struct map_desc map;
 
-	map.pfn = __phys_to_pfn(bank->start);
-	map.virtual = __phys_to_virt(bank->start);
-	map.length = bank->size;
+	map.pfn = bank_pfn_start(bank);
+	map.virtual = __phys_to_virt(bank_phys_start(bank));
+	map.length = bank_phys_size(bank);
 	map.type = MT_MEMORY;
 
 	create_mapping(&map);
 #endif
 }
 
-static unsigned long __init
-bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
+static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
 {
-	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
 	unsigned long start_pfn, end_pfn, boot_pfn;
 	unsigned int boot_pages;
 	pg_data_t *pgdat;
@@ -199,8 +224,8 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 		struct membank *bank = &mi->bank[i];
 		unsigned long start, end;
 
-		start = bank->start >> PAGE_SHIFT;
-		end = (bank->start + bank->size) >> PAGE_SHIFT;
+		start = bank_pfn_start(bank);
+		end = bank_pfn_end(bank);
 
 		if (start_pfn > start)
 			start_pfn = start;
@@ -230,8 +255,11 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	pgdat = NODE_DATA(node);
 	init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
 
-	for_each_nodebank(i, mi, node)
-		free_bootmem_node(pgdat, mi->bank[i].start, mi->bank[i].size);
+	for_each_nodebank(i, mi, node) {
+		struct membank *bank = &mi->bank[i];
+		free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
+	}
 
 	/*
 	 * Reserve the bootmem bitmap for this node.
@@ -239,31 +267,39 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
 			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
 
-	/*
-	 * Reserve any special node zero regions.
-	 */
-	if (node == 0)
-		reserve_node_zero(pgdat);
+	return end_pfn;
+}
 
+static void __init bootmem_reserve_initrd(int node)
+{
 #ifdef CONFIG_BLK_DEV_INITRD
-	/*
-	 * If the initrd is in this node, reserve its memory.
-	 */
-	if (node == initrd_node) {
-		int res = reserve_bootmem_node(pgdat, phys_initrd_start,
-				     phys_initrd_size, BOOTMEM_EXCLUSIVE);
-
-		if (res == 0) {
-			initrd_start = __phys_to_virt(phys_initrd_start);
-			initrd_end = initrd_start + phys_initrd_size;
-		} else {
-			printk(KERN_ERR
-				"INITRD: 0x%08lx+0x%08lx overlaps in-use "
-				"memory region - disabling initrd\n",
-				phys_initrd_start, phys_initrd_size);
-		}
+	pg_data_t *pgdat = NODE_DATA(node);
+	int res;
+
+	res = reserve_bootmem_node(pgdat, phys_initrd_start,
+			     phys_initrd_size, BOOTMEM_EXCLUSIVE);
+
+	if (res == 0) {
+		initrd_start = __phys_to_virt(phys_initrd_start);
+		initrd_end = initrd_start + phys_initrd_size;
+	} else {
+		printk(KERN_ERR
+			"INITRD: 0x%08lx+0x%08lx overlaps in-use "
+			"memory region - disabling initrd\n",
+			phys_initrd_start, phys_initrd_size);
 	}
 #endif
+}
+
+static void __init bootmem_free_node(int node, struct meminfo *mi)
+{
+	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
+	unsigned long start_pfn, end_pfn;
+	pg_data_t *pgdat = NODE_DATA(node);
+	int i;
+
+	start_pfn = pgdat->bdata->node_min_pfn;
+	end_pfn = pgdat->bdata->node_low_pfn;
 
 	/*
 	 * initialise the zones within this node.
@@ -284,7 +320,7 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	 */
 	zhole_size[0] = zone_size[0];
 	for_each_nodebank(i, mi, node)
-		zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
+		zhole_size[0] -= bank_pfn_size(&mi->bank[i]);
 
 	/*
 	 * Adjust the sizes according to any special requirements for
@@ -293,21 +329,12 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	arch_adjust_zones(node, zone_size, zhole_size);
 
 	free_area_init_node(node, zone_size, start_pfn, zhole_size);
-
-	return end_pfn;
 }
 
 void __init bootmem_init(struct meminfo *mi)
 {
 	unsigned long memend_pfn = 0;
-	int node, initrd_node, i;
-
-	/*
-	 * Invalidate the node number for empty or invalid memory banks
-	 */
-	for (i = 0; i < mi->nr_banks; i++)
-		if (mi->bank[i].size == 0 || mi->bank[i].node >= MAX_NUMNODES)
-			mi->bank[i].node = -1;
+	int node, initrd_node;
 
 	memcpy(&meminfo, mi, sizeof(meminfo));
 
@@ -320,9 +347,19 @@ void __init bootmem_init(struct meminfo *mi)
 	 * Run through each node initialising the bootmem allocator.
 	 */
 	for_each_node(node) {
-		unsigned long end_pfn;
+		unsigned long end_pfn = bootmem_init_node(node, mi);
 
-		end_pfn = bootmem_init_node(node, initrd_node, mi);
+		/*
+		 * Reserve any special node zero regions.
+		 */
+		if (node == 0)
+			reserve_node_zero(NODE_DATA(node));
+
+		/*
+		 * If the initrd is in this node, reserve its memory.
+		 */
+		if (node == initrd_node)
+			bootmem_reserve_initrd(node);
 
 		/*
 		 * Remember the highest memory PFN.
@@ -331,6 +368,19 @@ void __init bootmem_init(struct meminfo *mi)
 			memend_pfn = end_pfn;
 	}
 
+	/*
+	 * sparse_init() needs the bootmem allocator up and running.
+	 */
+	sparse_init();
+
+	/*
+	 * Now free memory in each node - free_area_init_node needs
+	 * the sparse mem_map arrays initialized by sparse_init()
+	 * for memmap_init_zone(), otherwise all PFNs are invalid.
+	 */
+	for_each_node(node)
+		bootmem_free_node(node, mi);
+
 	high_memory = __va(memend_pfn << PAGE_SHIFT);
 
 	/*
@@ -401,7 +451,9 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
 	 * information on the command line.
 	 */
 	for_each_nodebank(i, mi, node) {
-		bank_start = mi->bank[i].start >> PAGE_SHIFT;
+		struct membank *bank = &mi->bank[i];
+
+		bank_start = bank_pfn_start(bank);
 		if (bank_start < prev_bank_end) {
 			printk(KERN_ERR "MEM: unordered memory banks.  "
 				"Not freeing memmap.\n");
@@ -415,8 +467,7 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
 		if (prev_bank_end && prev_bank_end != bank_start)
 			free_memmap(node, prev_bank_end, bank_start);
 
-		prev_bank_end = (mi->bank[i].start +
-				 mi->bank[i].size) >> PAGE_SHIFT;
+		prev_bank_end = bank_pfn_end(bank);
 	}
 }
 
@@ -461,8 +512,8 @@ void __init mem_init(void)
 
 	num_physpages = 0;
 	for (i = 0; i < meminfo.nr_banks; i++) {
-		num_physpages += meminfo.bank[i].size >> PAGE_SHIFT;
-		printk(" %ldMB", meminfo.bank[i].size >> 20);
+		num_physpages += bank_pfn_size(&meminfo.bank[i]);
+		printk(" %ldMB", bank_phys_size(&meminfo.bank[i]) >> 20);
 	}
 
 	printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c
index 7429f8c..ffad039 100644
--- a/arch/arm/mm/iomap.c
+++ b/arch/arm/mm/iomap.c
@@ -7,8 +7,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #ifdef __io
 void __iomem *ioport_map(unsigned long port, unsigned int nr)
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index b81dbf9..18373f7 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -24,9 +24,10 @@
 #include <linux/errno.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
+#include <linux/io.h>
 
+#include <asm/cputype.h>
 #include <asm/cacheflush.h>
-#include <asm/io.h>
 #include <asm/mmu_context.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
@@ -55,8 +56,7 @@ static int remap_area_pte(pmd_t *pmd, unsigned long addr, unsigned long end,
 		if (!pte_none(*pte))
 			goto bad;
 
-		set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot),
-			    type->prot_pte_ext);
+		set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot), 0);
 		phys_addr += PAGE_SIZE;
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 	return 0;
@@ -332,15 +332,14 @@ __arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 }
 EXPORT_SYMBOL(__arm_ioremap);
 
-void __iounmap(volatile void __iomem *addr)
+void __iounmap(volatile void __iomem *io_addr)
 {
+	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
 #ifndef CONFIG_SMP
 	struct vm_struct **p, *tmp;
 #endif
 	unsigned int section_mapping = 0;
 
-	addr = (volatile void __iomem *)(PAGE_MASK & (unsigned long)addr);
-
 #ifndef CONFIG_SMP
 	/*
 	 * If this is a section based mapping we need to handle it
@@ -351,7 +350,7 @@ void __iounmap(volatile void __iomem *addr)
 	 */
 	write_lock(&vmlist_lock);
 	for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
-		if((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
+		if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
 			if (tmp->flags & VM_ARM_SECTION_MAPPING) {
 				*p = tmp->next;
 				unmap_area_sections((unsigned long)tmp->addr,
@@ -366,6 +365,6 @@ void __iounmap(volatile void __iomem *addr)
 #endif
 
 	if (!section_mapping)
-		vunmap((void __force *)addr);
+		vunmap(addr);
 }
 EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 7647c59..5d9f539 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -18,7 +18,6 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
 
 struct mem_type {
 	unsigned int prot_pte;
-	unsigned int prot_pte_ext;
 	unsigned int prot_l1;
 	unsigned int prot_sect;
 	unsigned int domain;
@@ -35,3 +34,5 @@ struct pglist_data;
 void __init create_mapping(struct map_desc *md);
 void __init bootmem_init(struct meminfo *mi);
 void reserve_node_zero(struct pglist_data *pgdat);
+
+extern void _text, _stext, _etext, __data_start, _end, __init_begin, __init_end;
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 3f6dc40..5358fcc 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -6,6 +6,8 @@
 #include <linux/mman.h>
 #include <linux/shm.h>
 #include <linux/sched.h>
+#include <linux/io.h>
+#include <asm/cputype.h>
 #include <asm/system.h>
 
 #define COLOUR_ALIGN(addr,pgoff)		\
@@ -37,8 +39,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	 * caches alias.  This is indicated by bits 9 and 21 of the
 	 * cache type register.
 	 */
-	cache_type = read_cpuid(CPUID_CACHETYPE);
-	if (cache_type != read_cpuid(CPUID_ID)) {
+	cache_type = read_cpuid_cachetype();
+	if (cache_type != read_cpuid_id()) {
 		aliasing = (cache_type | cache_type >> 12) & (1 << 11);
 		if (aliasing)
 			do_align = filp || flags & MAP_SHARED;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index a713e40..8ba7540 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -15,6 +15,7 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 
+#include <asm/cputype.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
@@ -27,9 +28,6 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-extern void _stext, _etext, __data_start, _end;
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
 /*
  * empty_zero_page is a special page that is used for
  * zero-initialized data and COW.
@@ -68,27 +66,27 @@ static struct cachepolicy cache_policies[] __initdata = {
 		.policy		= "uncached",
 		.cr_mask	= CR_W|CR_C,
 		.pmd		= PMD_SECT_UNCACHED,
-		.pte		= 0,
+		.pte		= L_PTE_MT_UNCACHED,
 	}, {
 		.policy		= "buffered",
 		.cr_mask	= CR_C,
 		.pmd		= PMD_SECT_BUFFERED,
-		.pte		= PTE_BUFFERABLE,
+		.pte		= L_PTE_MT_BUFFERABLE,
 	}, {
 		.policy		= "writethrough",
 		.cr_mask	= 0,
 		.pmd		= PMD_SECT_WT,
-		.pte		= PTE_CACHEABLE,
+		.pte		= L_PTE_MT_WRITETHROUGH,
 	}, {
 		.policy		= "writeback",
 		.cr_mask	= 0,
 		.pmd		= PMD_SECT_WB,
-		.pte		= PTE_BUFFERABLE|PTE_CACHEABLE,
+		.pte		= L_PTE_MT_WRITEBACK,
 	}, {
 		.policy		= "writealloc",
 		.cr_mask	= 0,
 		.pmd		= PMD_SECT_WBWA,
-		.pte		= PTE_BUFFERABLE|PTE_CACHEABLE,
+		.pte		= L_PTE_MT_WRITEALLOC,
 	}
 };
 
@@ -186,35 +184,28 @@ void adjust_cr(unsigned long mask, unsigned long set)
 
 static struct mem_type mem_types[] = {
 	[MT_DEVICE] = {		  /* Strongly ordered / ARMv6 shared device */
-		.prot_pte	= PROT_PTE_DEVICE,
+		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
+				  L_PTE_SHARED,
 		.prot_l1	= PMD_TYPE_TABLE,
 		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_UNCACHED,
 		.domain		= DOMAIN_IO,
 	},
 	[MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */
-		.prot_pte	= PROT_PTE_DEVICE,
-		.prot_pte_ext	= PTE_EXT_TEX(2),
+		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED,
 		.prot_l1	= PMD_TYPE_TABLE,
 		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_TEX(2),
 		.domain		= DOMAIN_IO,
 	},
 	[MT_DEVICE_CACHED] = {	  /* ioremap_cached */
-		.prot_pte	= PROT_PTE_DEVICE | L_PTE_CACHEABLE | L_PTE_BUFFERABLE,
+		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_CACHED,
 		.prot_l1	= PMD_TYPE_TABLE,
 		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_WB,
 		.domain		= DOMAIN_IO,
 	},	
-	[MT_DEVICE_IXP2000] = {	  /* IXP2400 requires XCB=101 for on-chip I/O */
-		.prot_pte	= PROT_PTE_DEVICE,
-		.prot_l1	= PMD_TYPE_TABLE,
-		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_BUFFERABLE |
-				  PMD_SECT_TEX(1),
-		.domain		= DOMAIN_IO,
-	},
 	[MT_DEVICE_WC] = {	/* ioremap_wc */
-		.prot_pte	= PROT_PTE_DEVICE,
+		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
 		.prot_l1	= PMD_TYPE_TABLE,
-		.prot_sect	= PROT_SECT_DEVICE,
+		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_BUFFERABLE,
 		.domain		= DOMAIN_IO,
 	},
 	[MT_CACHECLEAN] = {
@@ -259,7 +250,7 @@ static void __init build_mem_type_table(void)
 {
 	struct cachepolicy *cp;
 	unsigned int cr = get_cr();
-	unsigned int user_pgprot, kern_pgprot;
+	unsigned int user_pgprot, kern_pgprot, vecs_pgprot;
 	int cpu_arch = cpu_architecture();
 	int i;
 
@@ -277,6 +268,9 @@ static void __init build_mem_type_table(void)
 			cachepolicy = CPOLICY_WRITEBACK;
 		ecc_mask = 0;
 	}
+#ifdef CONFIG_SMP
+	cachepolicy = CPOLICY_WRITEALLOC;
+#endif
 
 	/*
 	 * On non-Xscale3 ARMv5-and-older systems, use CB=01
@@ -285,11 +279,8 @@ static void __init build_mem_type_table(void)
 	 * in xsc3 parlance, Uncached Normal in ARMv6 parlance).
 	 */
 	if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) {
-		mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1);
 		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
-	} else {
-		mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_BUFFERABLE;
-		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+		mem_types[MT_DEVICE_WC].prot_sect &= ~PMD_SECT_BUFFERABLE;
 	}
 
 	/*
@@ -312,7 +303,15 @@ static void __init build_mem_type_table(void)
 	}
 
 	cp = &cache_policies[cachepolicy];
-	kern_pgprot = user_pgprot = cp->pte;
+	vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
+
+#ifndef CONFIG_SMP
+	/*
+	 * Only use write-through for non-SMP systems
+	 */
+	if (cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
+		vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte;
+#endif
 
 	/*
 	 * Enable CPU-specific coherency if supported.
@@ -340,7 +339,6 @@ static void __init build_mem_type_table(void)
 		/*
 		 * Mark the device area as "shared device"
 		 */
-		mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
 		mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
 
 #ifdef CONFIG_SMP
@@ -349,30 +347,21 @@ static void __init build_mem_type_table(void)
 		 */
 		user_pgprot |= L_PTE_SHARED;
 		kern_pgprot |= L_PTE_SHARED;
+		vecs_pgprot |= L_PTE_SHARED;
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 #endif
 	}
 
 	for (i = 0; i < 16; i++) {
 		unsigned long v = pgprot_val(protection_map[i]);
-		v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot;
-		protection_map[i] = __pgprot(v);
+		protection_map[i] = __pgprot(v | user_pgprot);
 	}
 
-	mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot;
-	mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot;
+	mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot;
+	mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot;
 
-	if (cpu_arch >= CPU_ARCH_ARMv5) {
-#ifndef CONFIG_SMP
-		/*
-		 * Only use write-through for non-SMP systems
-		 */
-		mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
-		mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
-#endif
-	} else {
+	if (cpu_arch < CPU_ARCH_ARMv5)
 		mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
-	}
 
 	pgprot_user   = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
 	pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
@@ -420,8 +409,7 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 
 	pte = pte_offset_kernel(pmd, addr);
 	do {
-		set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)),
-			    type->prot_pte_ext);
+		set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
 		pfn++;
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
@@ -588,12 +576,35 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 		create_mapping(io_desc + i);
 }
 
+static unsigned long __initdata vmalloc_reserve = SZ_128M;
+
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the vmalloc
+ * area - the default is 128m.
+ */
+static void __init early_vmalloc(char **arg)
+{
+	vmalloc_reserve = memparse(*arg, arg);
+
+	if (vmalloc_reserve < SZ_16M) {
+		vmalloc_reserve = SZ_16M;
+		printk(KERN_WARNING
+			"vmalloc area too small, limiting to %luMB\n",
+			vmalloc_reserve >> 20);
+	}
+}
+__early_param("vmalloc=", early_vmalloc);
+
+#define VMALLOC_MIN	(void *)(VMALLOC_END - vmalloc_reserve)
+
 static int __init check_membank_valid(struct membank *mb)
 {
 	/*
-	 * Check whether this memory region has non-zero size.
+	 * Check whether this memory region has non-zero size or
+	 * invalid node number.
 	 */
-	if (mb->size == 0)
+	if (mb->size == 0 || mb->node >= MAX_NUMNODES)
 		return 0;
 
 	/*
@@ -627,8 +638,7 @@ static int __init check_membank_valid(struct membank *mb)
 
 static void __init sanity_check_meminfo(struct meminfo *mi)
 {
-	int i;
-	int j;
+	int i, j;
 
 	for (i = 0, j = 0; i < mi->nr_banks; i++) {
 		if (check_membank_valid(&mi->bank[i]))
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 63c62fd..07b62b2 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -7,16 +7,14 @@
 #include <linux/mm.h>
 #include <linux/pagemap.h>
 #include <linux/bootmem.h>
+#include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/io.h>
 #include <asm/page.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
 
-extern void _stext, __data_start, _end;
-
 /*
  * Reserve the various regions of node 0
  */
@@ -43,12 +41,26 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 			BOOTMEM_DEFAULT);
 }
 
+static void __init sanity_check_meminfo(struct meminfo *mi)
+{
+	int i, j;
+
+	for (i = 0, j = 0; i < mi->nr_banks; i++) {
+		struct membank *mb = &mi->bank[i];
+
+		if (mb->size != 0 && mb->node < MAX_NUMNODES)
+			mi->bank[j++] = mi->bank[i];
+	}
+	mi->nr_banks = j;
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
  */
 void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
 {
+	sanity_check_meminfo(mi);
 	bootmem_init(mi);
 }
 
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 5673f4d..b5551bf 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -29,7 +29,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
@@ -399,29 +399,7 @@ ENTRY(cpu_arm1020_switch_mm)
 	.align	5
 ENTRY(cpu_arm1020_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r1, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mcr	p15, 0, r0, c7, c10, 4
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 4343fdb..8bc6740 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -29,7 +29,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
@@ -383,29 +383,7 @@ ENTRY(cpu_arm1020e_switch_mm)
 	.align	5
 ENTRY(cpu_arm1020e_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r1, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 2a4ea16..2cd03e6 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
@@ -365,29 +365,7 @@ ENTRY(cpu_arm1022_switch_mm)
 	.align	5
 ENTRY(cpu_arm1022_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r1, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 77a1bab..ad961a8 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
@@ -354,29 +354,7 @@ ENTRY(cpu_arm1026_switch_mm)
 	.align	5
 ENTRY(cpu_arm1026_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r1, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index c371fc8..80d6e1d 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -15,11 +15,13 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
 
+#include "proc-macros.S"
+
 ENTRY(cpu_arm6_dcache_clean_area)
 ENTRY(cpu_arm7_dcache_clean_area)
 		mov	pc, lr
@@ -214,30 +216,13 @@ ENTRY(cpu_arm7_switch_mm)
  *	   : r1 = value to set
  * Purpose : Set a PTE and flush it out of any WB cache
  */
-		.align	5
+	.align	5
 ENTRY(cpu_arm6_set_pte_ext)
 ENTRY(cpu_arm7_set_pte_ext)
 #ifdef CONFIG_MMU
-		str	r1, [r0], #-2048		@ linux version
-
-		eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-		bic	r2, r1, #PTE_SMALL_AP_MASK
-		bic	r2, r2, #PTE_TYPE_MASK
-		orr	r2, r2, #PTE_TYPE_SMALL
-
-		tst	r1, #L_PTE_USER			@ User?
-		orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-		tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-		orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-		tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young
-		movne	r2, #0
-
-		str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext wc_disable=0
 #endif /* CONFIG_MMU */
-		mov	pc, lr
+	mov	pc, lr
 
 /*
  * Function: _arm6_7_reset
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index eda733d..85ae186 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -36,7 +36,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
@@ -93,29 +93,12 @@ ENTRY(cpu_arm720_switch_mm)
  *	   : r1 = value to set
  * Purpose : Set a PTE and flush it out of any WB cache
  */
-		.align	5
+	.align	5
 ENTRY(cpu_arm720_set_pte_ext)
 #ifdef CONFIG_MMU
-		str	r1, [r0], #-2048		@ linux version
-
-		eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-		bic	r2, r1, #PTE_SMALL_AP_MASK
-		bic	r2, r2, #PTE_TYPE_MASK
-		orr	r2, r2, #PTE_TYPE_SMALL
-
-		tst	r1, #L_PTE_USER			@ User?
-		orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-		tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-		orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-		tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young
-		movne	r2, #0
-
-		str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext wc_disable=0
 #endif
-		mov	pc, lr
+	mov	pc, lr
 
 /*
  * Function: arm720_reset
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 3a57376..4f95bee 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 7b3ecde..93e05fa 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 28cdb06..914d688 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -28,7 +28,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -351,33 +351,11 @@ ENTRY(cpu_arm920_switch_mm)
 	.align	5
 ENTRY(cpu_arm920_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r2, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif /* CONFIG_MMU */
+#endif
 	mov	pc, lr
 
 	__INIT
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 94ddcb4..51c9c98 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -29,7 +29,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -355,29 +355,7 @@ ENTRY(cpu_arm922_switch_mm)
 	.align	5
 ENTRY(cpu_arm922_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r2, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index d045812..2724526 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -52,7 +52,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -398,29 +398,7 @@ ENTRY(cpu_arm925_switch_mm)
 	.align	5
 ENTRY(cpu_arm925_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r2, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 4cd3316..5446693 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -28,7 +28,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -359,29 +359,7 @@ ENTRY(cpu_arm926_switch_mm)
 	.align	5
 ENTRY(cpu_arm926_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r2, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 551244d..f595117 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -11,7 +11,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 6168c61..e03f6ff 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -13,7 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index c85c1f5..be6c11d 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index f2e5884..0fe1f8f 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -22,7 +22,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -80,7 +80,8 @@ ENTRY(cpu_feroceon_proc_fin)
 	msr	cpsr_c, ip
 	bl	feroceon_flush_kern_cache_all
 
-#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && \
+	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
 	mov	r0, #0
 	mcr	p15, 1, r0, c15, c9, 0		@ clean L2
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
@@ -389,7 +390,8 @@ ENTRY(feroceon_range_cache_fns)
 
 	.align	5
 ENTRY(cpu_feroceon_dcache_clean_area)
-#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && \
+	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
 	mov	r2, r0
 	mov	r3, r1
 #endif
@@ -397,7 +399,8 @@ ENTRY(cpu_feroceon_dcache_clean_area)
 	add	r0, r0, #CACHE_DLINESIZE
 	subs	r1, r1, #CACHE_DLINESIZE
 	bhi	1b
-#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && \
+	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
 1:	mcr	p15, 1, r2, c15, c9, 1		@ clean L2 entry
 	add	r2, r2, #CACHE_DLINESIZE
 	subs	r3, r3, #CACHE_DLINESIZE
@@ -446,27 +449,11 @@ ENTRY(cpu_feroceon_switch_mm)
 	.align	5
 ENTRY(cpu_feroceon_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext wc_disable=0
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && \
+	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
 	mcr	p15, 1, r0, c15, c9, 1		@ clean L2 entry
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index b131500..54b1f72 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -71,3 +71,173 @@
 	mov	\reg, #16			@ size offset
 	mov	\reg, \reg, lsl \tmp		@ actual cache line size
 	.endm
+
+
+/*
+ * Sanity check the PTE configuration for the code below - which makes
+ * certain assumptions about how these bits are layed out.
+ */
+#if L_PTE_SHARED != PTE_EXT_SHARED
+#error PTE shared bit mismatch
+#endif
+#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
+#error PTE bufferable bit mismatch
+#endif
+#if L_PTE_CACHEABLE != PTE_CACHEABLE
+#error PTE cacheable bit mismatch
+#endif
+#if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
+     L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
+#error Invalid Linux PTE bit settings
+#endif
+
+/*
+ * The ARMv6 and ARMv7 set_pte_ext translation function.
+ *
+ * Permission translation:
+ *  YUWD  APX AP1 AP0	SVC	User
+ *  0xxx   0   0   0	no acc	no acc
+ *  100x   1   0   1	r/o	no acc
+ *  10x0   1   0   1	r/o	no acc
+ *  1011   0   0   1	r/w	no acc
+ *  110x   0   1   0	r/w	r/o
+ *  11x0   0   1   0	r/w	r/o
+ *  1111   0   1   1	r/w	r/w
+ */
+	.macro	armv6_mt_table pfx
+\pfx\()_mt_table:
+	.long	0x00						@ L_PTE_MT_UNCACHED
+	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_BUFFERABLE
+	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
+	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
+	.long	PTE_BUFFERABLE					@ L_PTE_MT_DEV_SHARED
+	.long	0x00						@ unused
+	.long	0x00						@ L_PTE_MT_MINICACHE (not present)
+	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC
+	.long	0x00						@ unused
+	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_DEV_WC
+	.long	0x00						@ unused
+	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_DEV_CACHED
+	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
+	.long	0x00						@ unused
+	.long	0x00						@ unused
+	.long	0x00						@ unused
+	.endm
+
+	.macro	armv6_set_pte_ext pfx
+	str	r1, [r0], #-2048		@ linux version
+
+	bic	r3, r1, #0x000003fc
+	bic	r3, r3, #PTE_TYPE_MASK
+	orr	r3, r3, r2
+	orr	r3, r3, #PTE_EXT_AP0 | 2
+
+	adr	ip, \pfx\()_mt_table
+	and	r2, r1, #L_PTE_MT_MASK
+	ldr	r2, [ip, r2]
+
+	tst	r1, #L_PTE_WRITE
+	tstne	r1, #L_PTE_DIRTY
+	orreq	r3, r3, #PTE_EXT_APX
+
+	tst	r1, #L_PTE_USER
+	orrne	r3, r3, #PTE_EXT_AP1
+	tstne	r3, #PTE_EXT_APX
+	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+
+	tst	r1, #L_PTE_EXEC
+	orreq	r3, r3, #PTE_EXT_XN
+
+	orr	r3, r3, r2
+
+	tst	r1, #L_PTE_YOUNG
+	tstne	r1, #L_PTE_PRESENT
+	moveq	r3, #0
+
+	str	r3, [r0]
+	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
+	.endm
+
+
+/*
+ * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
+ * covering most CPUs except Xscale and Xscale 3.
+ *
+ * Permission translation:
+ *  YUWD   AP	SVC	User
+ *  0xxx  0x00	no acc	no acc
+ *  100x  0x00	r/o	no acc
+ *  10x0  0x00	r/o	no acc
+ *  1011  0x55	r/w	no acc
+ *  110x  0xaa	r/w	r/o
+ *  11x0  0xaa	r/w	r/o
+ *  1111  0xff	r/w	r/w
+ */
+	.macro	armv3_set_pte_ext wc_disable=1
+	str	r1, [r0], #-2048		@ linux version
+
+	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
+	bic	r2, r2, #PTE_TYPE_MASK
+	orr	r2, r2, #PTE_TYPE_SMALL
+
+	tst	r3, #L_PTE_USER			@ user?
+	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
+
+	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ write and dirty?
+	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
+	movne	r2, #0
+
+	.if	\wc_disable
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	tst	r2, #PTE_CACHEABLE
+	bicne	r2, r2, #PTE_BUFFERABLE
+#endif
+	.endif
+	str	r2, [r0]			@ hardware version
+	.endm
+
+
+/*
+ * Xscale set_pte_ext translation, split into two halves to cope
+ * with work-arounds.  r3 must be preserved by code between these
+ * two macros.
+ *
+ * Permission translation:
+ *  YUWD  AP	SVC	User
+ *  0xxx  00	no acc	no acc
+ *  100x  00	r/o	no acc
+ *  10x0  00	r/o	no acc
+ *  1011  01	r/w	no acc
+ *  110x  10	r/w	r/o
+ *  11x0  10	r/w	r/o
+ *  1111  11	r/w	r/w
+ */
+	.macro	xscale_set_pte_ext_prologue
+	str	r1, [r0], #-2048		@ linux version
+
+	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
+	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
+
+	tst	r3, #L_PTE_USER			@ user?
+	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
+
+	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ write and dirty?
+	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
+						@ combined with user -> user r/w
+	.endm
+
+	.macro	xscale_set_pte_ext_epilogue
+	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
+	movne	r2, #0				@ no -> fault
+
+	str	r2, [r0]			@ hardware version
+	mov	ip, #0
+	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
+	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
+	.endm
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index bbe1057..90a7e52 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -17,7 +17,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
@@ -153,24 +153,7 @@ ENTRY(cpu_sa110_switch_mm)
 	.align	5
 ENTRY(cpu_sa110_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext wc_disable=0
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 871ba01..451e2d9 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -22,7 +22,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
@@ -166,24 +166,7 @@ ENTRY(cpu_sa1100_switch_mm)
 	.align	5
 ENTRY(cpu_sa1100_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext wc_disable=0
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 5702ec5..294943b 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -13,7 +13,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 
@@ -114,46 +114,12 @@ ENTRY(cpu_v6_switch_mm)
  *		  (hardware version is stored at -1024 bytes)
  *	- pte   - PTE value to store
  *	- ext	- value for extended PTE bits
- *
- *	Permissions:
- *	  YUWD  APX AP1 AP0	SVC	User
- *	  0xxx   0   0   0	no acc	no acc
- *	  100x   1   0   1	r/o	no acc
- *	  10x0   1   0   1	r/o	no acc
- *	  1011   0   0   1	r/w	no acc
- *	  110x   0   1   0	r/w	r/o
- *	  11x0   0   1   0	r/w	r/o
- *	  1111   0   1   1	r/w	r/w
  */
+	armv6_mt_table cpu_v6
+
 ENTRY(cpu_v6_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	bic	r3, r1, #0x000003f0
-	bic	r3, r3, #0x00000003
-	orr	r3, r3, r2
-	orr	r3, r3, #PTE_EXT_AP0 | 2
-
-	tst	r1, #L_PTE_WRITE
-	tstne	r1, #L_PTE_DIRTY
-	orreq	r3, r3, #PTE_EXT_APX
-
-	tst	r1, #L_PTE_USER
-	orrne	r3, r3, #PTE_EXT_AP1
-	tstne	r3, #PTE_EXT_APX
-	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-
-	tst	r1, #L_PTE_YOUNG
-	biceq	r3, r3, #PTE_EXT_APX | PTE_EXT_AP_MASK
-
-	tst	r1, #L_PTE_EXEC
-	orreq	r3, r3, #PTE_EXT_XN
-
-	tst	r1, #L_PTE_PRESENT
-	moveq	r3, #0
-
-	str	r3, [r0]
-	mcr	p15, 0, r0, c7, c10, 1 @ flush_pte
+	armv6_set_pte_ext cpu_v6
 #endif
 	mov	pc, lr
 
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index b49f9a4..07f82db 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -12,7 +12,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 
@@ -25,9 +25,11 @@
 
 ENTRY(cpu_v7_proc_init)
 	mov	pc, lr
+ENDPROC(cpu_v7_proc_init)
 
 ENTRY(cpu_v7_proc_fin)
 	mov	pc, lr
+ENDPROC(cpu_v7_proc_fin)
 
 /*
  *	cpu_v7_reset(loc)
@@ -43,6 +45,7 @@ ENTRY(cpu_v7_proc_fin)
 	.align	5
 ENTRY(cpu_v7_reset)
 	mov	pc, r0
+ENDPROC(cpu_v7_reset)
 
 /*
  *	cpu_v7_do_idle()
@@ -52,8 +55,9 @@ ENTRY(cpu_v7_reset)
  *	IRQs are already disabled.
  */
 ENTRY(cpu_v7_do_idle)
-	.long	0xe320f003			@ ARM V7 WFI instruction
+	wfi
 	mov	pc, lr
+ENDPROC(cpu_v7_do_idle)
 
 ENTRY(cpu_v7_dcache_clean_area)
 #ifndef TLB_CAN_READ_FROM_L1_CACHE
@@ -65,6 +69,7 @@ ENTRY(cpu_v7_dcache_clean_area)
 	dsb
 #endif
 	mov	pc, lr
+ENDPROC(cpu_v7_dcache_clean_area)
 
 /*
  *	cpu_v7_switch_mm(pgd_phys, tsk)
@@ -89,6 +94,7 @@ ENTRY(cpu_v7_switch_mm)
 	isb
 #endif
 	mov	pc, lr
+ENDPROC(cpu_v7_switch_mm)
 
 /*
  *	cpu_v7_set_pte_ext(ptep, pte)
@@ -99,26 +105,19 @@ ENTRY(cpu_v7_switch_mm)
  *		  (hardware version is stored at -1024 bytes)
  *	- pte   - PTE value to store
  *	- ext	- value for extended PTE bits
- *
- *	Permissions:
- *	  YUWD  APX AP1 AP0	SVC	User
- *	  0xxx   0   0   0	no acc	no acc
- *	  100x   1   0   1	r/o	no acc
- *	  10x0   1   0   1	r/o	no acc
- *	  1011   0   0   1	r/w	no acc
- *	  110x   0   1   0	r/w	r/o
- *	  11x0   0   1   0	r/w	r/o
- *	  1111   0   1   1	r/w	r/w
  */
 ENTRY(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
 	str	r1, [r0], #-2048		@ linux version
 
 	bic	r3, r1, #0x000003f0
-	bic	r3, r3, #0x00000003
+	bic	r3, r3, #PTE_TYPE_MASK
 	orr	r3, r3, r2
 	orr	r3, r3, #PTE_EXT_AP0 | 2
 
+	tst	r2, #1 << 4
+	orrne	r3, r3, #PTE_EXT_TEX(1)
+
 	tst	r1, #L_PTE_WRITE
 	tstne	r1, #L_PTE_DIRTY
 	orreq	r3, r3, #PTE_EXT_APX
@@ -128,19 +127,18 @@ ENTRY(cpu_v7_set_pte_ext)
 	tstne	r3, #PTE_EXT_APX
 	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
 
-	tst	r1, #L_PTE_YOUNG
-	biceq	r3, r3, #PTE_EXT_APX | PTE_EXT_AP_MASK
-
 	tst	r1, #L_PTE_EXEC
 	orreq	r3, r3, #PTE_EXT_XN
 
-	tst	r1, #L_PTE_PRESENT
+	tst	r1, #L_PTE_YOUNG
+	tstne	r1, #L_PTE_PRESENT
 	moveq	r3, #0
 
 	str	r3, [r0]
 	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
 #endif
 	mov	pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
 
 cpu_v7_name:
 	.ascii	"ARMv7 Processor"
@@ -182,12 +180,17 @@ __v7_setup:
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
 #endif
+	ldr	r5, =0xff0aa1a8
+	ldr	r6, =0x40e040e0
+	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
+	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
 	mov	pc, lr				@ return to head.S:__ret
+ENDPROC(__v7_setup)
 
 	/*
 	 *         V X F   I D LR
@@ -197,7 +200,7 @@ __v7_setup:
 	 */
 	.type	v7_crval, #object
 v7_crval:
-	crval	clear=0x0120c302, mmuset=0x00c0387d, ucset=0x00c0187c
+	crval	clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c
 
 __v7_setup_stack:
 	.space	4 * 11				@ 11 registers
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 7bd9e71..04dc8b6 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -27,7 +27,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/pgtable-hwdef.h>
@@ -345,38 +345,38 @@ ENTRY(cpu_xsc3_switch_mm)
  * cpu_xsc3_set_pte_ext(ptep, pte, ext)
  *
  * Set a PTE and flush it out
- *
  */
+cpu_xsc3_mt_table:
+	.long	0x00						@ L_PTE_MT_UNCACHED
+	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_BUFFERABLE
+	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
+	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
+	.long	PTE_EXT_TEX(1) | PTE_BUFFERABLE			@ L_PTE_MT_DEV_SHARED
+	.long	0x00						@ unused
+	.long	0x00						@ L_PTE_MT_MINICACHE (not present)
+	.long	PTE_EXT_TEX(5) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC (not present?)
+	.long	0x00						@ unused
+	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_DEV_WC
+	.long	0x00						@ unused
+	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_DEV_CACHED
+	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
+	.long	0x00						@ unused
+	.long	0x00						@ unused
+	.long	0x00						@ unused
+
 	.align	5
 ENTRY(cpu_xsc3_set_pte_ext)
-	str	r1, [r0], #-2048		@ linux version
+	xscale_set_pte_ext_prologue
 
-	bic	r2, r1, #0xff0			@ keep C, B bits
-	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
 	tst	r1, #L_PTE_SHARED		@ shared?
-	orrne	r2, r2, #0x200
-
-	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	tst	r3, #L_PTE_USER			@ user?
-	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
-
-	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ write and dirty?
-	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
-						@ combined with user -> user r/w
-
-	@ If it's cacheable, it needs to be in L2 also.
-	eor	ip, r1, #L_PTE_CACHEABLE
-	tst	ip, #L_PTE_CACHEABLE
-	orreq	r2, r2, #PTE_EXT_TEX(0x5)
-
-	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
-	movne	r2, #0				@ no -> fault
-
-	str	r2, [r0]			@ hardware version
-	mov	ip, #0
-	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
+	and	r1, r1, #L_PTE_MT_MASK
+	adr	ip, cpu_xsc3_mt_table
+	ldr	ip, [ip, r1]
+	orrne	r2, r2, #PTE_EXT_COHERENT	@ interlock: mask in coherent bit
+	bic	r2, r2, #0x0c			@ clear old C,B bits
+	orr	r2, r2, ip
+
+	xscale_set_pte_ext_epilogue
 	mov	pc, lr
 
 	.ltorg
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 2dd8527..0cce37b 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -23,7 +23,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
 #include <asm/pgtable.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/page.h>
@@ -406,8 +406,6 @@ ENTRY(cpu_xscale_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
-#define PTE_CACHE_WRITE_ALLOCATE 0
-
 /*
  * cpu_xscale_switch_mm(pgd)
  *
@@ -431,56 +429,42 @@ ENTRY(cpu_xscale_switch_mm)
  *
  * Errata 40: must set memory to write-through for user read-only pages.
  */
+cpu_xscale_mt_table:
+	.long	0x00						@ L_PTE_MT_UNCACHED
+	.long	PTE_BUFFERABLE					@ L_PTE_MT_BUFFERABLE
+	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
+	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
+	.long	PTE_EXT_TEX(1) | PTE_BUFFERABLE			@ L_PTE_MT_DEV_SHARED
+	.long	0x00						@ unused
+	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE			@ L_PTE_MT_MINICACHE
+	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC
+	.long	0x00						@ unused
+	.long	PTE_BUFFERABLE					@ L_PTE_MT_DEV_WC
+	.long	0x00						@ unused
+	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_DEV_CACHED
+	.long	0x00						@ L_PTE_MT_DEV_NONSHARED
+	.long	0x00						@ unused
+	.long	0x00						@ unused
+	.long	0x00						@ unused
+
 	.align	5
 ENTRY(cpu_xscale_set_pte_ext)
-	str	r1, [r0], #-2048		@ linux version
-
-	bic	r2, r1, #0xff0
-	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
-
-	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	tst	r3, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
-
-	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
-						@ combined with user -> user r/w
-
-	@
-	@ Handle the X bit.  We want to set this bit for the minicache
-	@ (U = E = B = W = 0, C = 1) or when write allocate is enabled,
-	@ and we have a writeable, cacheable region.  If we ignore the
-	@ U and E bits, we can allow user space to use the minicache as
-	@ well.
-	@
-	@  X = (C & ~W & ~B) | (C & W & B & write_allocate)
-	@
-	eor	ip, r1, #L_PTE_CACHEABLE
-	tst	ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
-#if PTE_CACHE_WRITE_ALLOCATE
-	eorne	ip, r1, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
-	tstne	ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
-#endif
-	orreq	r2, r2, #PTE_EXT_TEX(1)
+	xscale_set_pte_ext_prologue
 
 	@
-	@ Erratum 40: The B bit must be cleared for a user read-only
-	@ cacheable page.
-	@
-	@  B = B & ~(U & C & ~W)
+	@ Erratum 40: must set memory to write-through for user read-only pages
 	@
-	and	ip, r1, #L_PTE_USER | L_PTE_WRITE | L_PTE_CACHEABLE
-	teq	ip, #L_PTE_USER | L_PTE_CACHEABLE
-	biceq	r2, r2, #PTE_BUFFERABLE
+	and	ip, r1, #(L_PTE_MT_MASK | L_PTE_USER | L_PTE_WRITE) & ~(4 << 2)
+	teq	ip, #L_PTE_MT_WRITEBACK | L_PTE_USER
 
-	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0				@ no -> fault
+	moveq	r1, #L_PTE_MT_WRITETHROUGH
+	and	r1, r1, #L_PTE_MT_MASK
+	adr	ip, cpu_xscale_mt_table
+	ldr	ip, [ip, r1]
+	bic	r2, r2, #0x0c
+	orr	r2, r2, ip
 
-	str	r2, [r0]			@ hardware version
-	mov	ip, #0
-	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	xscale_set_pte_ext_epilogue
 	mov	pc, lr
 
 
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index b56dda8..24ba510 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -51,6 +51,7 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	mcr	p15, 0, ip, c7, c5, 6		@ flush BTAC/BTB
 	dsb
 	mov	pc, lr
+ENDPROC(v7wbi_flush_user_tlb_range)
 
 /*
  *	v7wbi_flush_kern_tlb_range(start,end)
@@ -77,6 +78,7 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	dsb
 	isb
 	mov	pc, lr
+ENDPROC(v7wbi_flush_kern_tlb_range)
 
 	.section ".text.init", #alloc, #execinstr
 
diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c
index 79f8e67..d31c49f 100644
--- a/arch/arm/nwfpe/fpa11_cpdt.c
+++ b/arch/arm/nwfpe/fpa11_cpdt.c
@@ -26,7 +26,7 @@
 #include "fpmodule.h"
 #include "fpmodule.inl"
 
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 static inline void loadSingle(const unsigned int Fn, const unsigned int __user *pMem)
 {
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index e61d0cc..88e31f5 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -11,3 +11,4 @@ oprofile-$(CONFIG_CPU_XSCALE)		+= op_model_xscale.o
 oprofile-$(CONFIG_OPROFILE_ARM11_CORE)	+= op_model_arm11_core.o
 oprofile-$(CONFIG_OPROFILE_ARMV6)	+= op_model_v6.o
 oprofile-$(CONFIG_OPROFILE_MPCORE)	+= op_model_mpcore.o
+oprofile-$(CONFIG_OPROFILE_ARMV7)	+= op_model_v7.o
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index f5ebf30..cefc21c 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -16,8 +16,8 @@
 #include <linux/oprofile.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
+#include <linux/uaccess.h>
 #include <asm/ptrace.h>
-#include <asm/uaccess.h>
 
 #include "../kernel/stacktrace.h"
 
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 0a5cf3a..3fcd752 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -145,6 +145,10 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	spec = &op_mpcore_spec;
 #endif
 
+#ifdef CONFIG_OPROFILE_ARMV7
+	spec = &op_armv7_spec;
+#endif
+
 	if (spec) {
 		ret = spec->init();
 		if (ret < 0)
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 4899c62..8c4e4f6 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -26,6 +26,7 @@ extern struct op_arm_model_spec op_xscale_spec;
 
 extern struct op_arm_model_spec op_armv6_spec;
 extern struct op_arm_model_spec op_mpcore_spec;
+extern struct op_arm_model_spec op_armv7_spec;
 
 extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
 
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 92db6e0..4de366e 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -36,8 +36,8 @@
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c
new file mode 100644
index 0000000..f20295f
--- /dev/null
+++ b/arch/arm/oprofile/op_model_v7.c
@@ -0,0 +1,411 @@
+/**
+ * op_model_v7.c
+ * ARM V7 (Cortex A8) Event Monitor Driver
+ *
+ * Copyright 2008 Jean Pihet <jpihet@mvista.com>
+ * Copyright 2004 ARM SMP Development Team
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_v7.h"
+
+/* #define DEBUG */
+
+
+/*
+ * ARM V7 PMNC support
+ */
+
+static u32 cnt_en[CNTMAX];
+
+static inline void armv7_pmnc_write(u32 val)
+{
+	val &= PMNC_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r" (val));
+}
+
+static inline u32 armv7_pmnc_read(void)
+{
+	u32 val;
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+	return val;
+}
+
+static inline u32 armv7_pmnc_enable_counter(unsigned int cnt)
+{
+	u32 val;
+
+	if (cnt >= CNTMAX) {
+		printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
+			" %d\n", smp_processor_id(), cnt);
+		return -1;
+	}
+
+	if (cnt == CCNT)
+		val = CNTENS_C;
+	else
+		val = (1 << (cnt - CNT0));
+
+	val &= CNTENS_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
+
+	return cnt;
+}
+
+static inline u32 armv7_pmnc_disable_counter(unsigned int cnt)
+{
+	u32 val;
+
+	if (cnt >= CNTMAX) {
+		printk(KERN_ERR "oprofile: CPU%u disabling wrong PMNC counter"
+			" %d\n", smp_processor_id(), cnt);
+		return -1;
+	}
+
+	if (cnt == CCNT)
+		val = CNTENC_C;
+	else
+		val = (1 << (cnt - CNT0));
+
+	val &= CNTENC_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
+
+	return cnt;
+}
+
+static inline u32 armv7_pmnc_enable_intens(unsigned int cnt)
+{
+	u32 val;
+
+	if (cnt >= CNTMAX) {
+		printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
+			" interrupt enable %d\n", smp_processor_id(), cnt);
+		return -1;
+	}
+
+	if (cnt == CCNT)
+		val = INTENS_C;
+	else
+		val = (1 << (cnt - CNT0));
+
+	val &= INTENS_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
+
+	return cnt;
+}
+
+static inline u32 armv7_pmnc_getreset_flags(void)
+{
+	u32 val;
+
+	/* Read */
+	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+
+	/* Write to clear flags */
+	val &= FLAG_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
+
+	return val;
+}
+
+static inline int armv7_pmnc_select_counter(unsigned int cnt)
+{
+	u32 val;
+
+	if ((cnt == CCNT) || (cnt >= CNTMAX)) {
+		printk(KERN_ERR "oprofile: CPU%u selecting wrong PMNC counteri"
+			" %d\n", smp_processor_id(), cnt);
+		return -1;
+	}
+
+	val = (cnt - CNT0) & SELECT_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+
+	return cnt;
+}
+
+static inline void armv7_pmnc_write_evtsel(unsigned int cnt, u32 val)
+{
+	if (armv7_pmnc_select_counter(cnt) == cnt) {
+		val &= EVTSEL_MASK;
+		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
+	}
+}
+
+static void armv7_pmnc_reset_counter(unsigned int cnt)
+{
+	u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
+	u32 val = -(u32)counter_config[cpu_cnt].count;
+
+	switch (cnt) {
+	case CCNT:
+		armv7_pmnc_disable_counter(cnt);
+
+		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (val));
+
+		if (cnt_en[cnt] != 0)
+		    armv7_pmnc_enable_counter(cnt);
+
+		break;
+
+	case CNT0:
+	case CNT1:
+	case CNT2:
+	case CNT3:
+		armv7_pmnc_disable_counter(cnt);
+
+		if (armv7_pmnc_select_counter(cnt) == cnt)
+		    asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (val));
+
+		if (cnt_en[cnt] != 0)
+		    armv7_pmnc_enable_counter(cnt);
+
+		break;
+
+	default:
+		printk(KERN_ERR "oprofile: CPU%u resetting wrong PMNC counter"
+			" %d\n", smp_processor_id(), cnt);
+		break;
+	}
+}
+
+int armv7_setup_pmnc(void)
+{
+	unsigned int cnt;
+
+	if (armv7_pmnc_read() & PMNC_E) {
+		printk(KERN_ERR "oprofile: CPU%u PMNC still enabled when setup"
+			" new event counter.\n", smp_processor_id());
+		return -EBUSY;
+	}
+
+	/*
+	 * Initialize & Reset PMNC: C bit, D bit and P bit.
+	 *  Note: Using a slower count for CCNT (D bit: divide by 64) results
+	 *   in a more stable system
+	 */
+	armv7_pmnc_write(PMNC_P | PMNC_C | PMNC_D);
+
+
+	for (cnt = CCNT; cnt < CNTMAX; cnt++) {
+		unsigned long event;
+		u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
+
+		/*
+		 * Disable counter
+		 */
+		armv7_pmnc_disable_counter(cnt);
+		cnt_en[cnt] = 0;
+
+		if (!counter_config[cpu_cnt].enabled)
+			continue;
+
+		event = counter_config[cpu_cnt].event & 255;
+
+		/*
+		 * Set event (if destined for PMNx counters)
+		 * We don't need to set the event if it's a cycle count
+		 */
+		if (cnt != CCNT)
+			armv7_pmnc_write_evtsel(cnt, event);
+
+		/*
+		 * Enable interrupt for this counter
+		 */
+		armv7_pmnc_enable_intens(cnt);
+
+		/*
+		 * Reset counter
+		 */
+		armv7_pmnc_reset_counter(cnt);
+
+		/*
+		 * Enable counter
+		 */
+		armv7_pmnc_enable_counter(cnt);
+		cnt_en[cnt] = 1;
+	}
+
+	return 0;
+}
+
+static inline void armv7_start_pmnc(void)
+{
+	armv7_pmnc_write(armv7_pmnc_read() | PMNC_E);
+}
+
+static inline void armv7_stop_pmnc(void)
+{
+	armv7_pmnc_write(armv7_pmnc_read() & ~PMNC_E);
+}
+
+/*
+ * CPU counters' IRQ handler (one IRQ per CPU)
+ */
+static irqreturn_t armv7_pmnc_interrupt(int irq, void *arg)
+{
+	struct pt_regs *regs = get_irq_regs();
+	unsigned int cnt;
+	u32 flags;
+
+
+	/*
+	 * Stop IRQ generation
+	 */
+	armv7_stop_pmnc();
+
+	/*
+	 * Get and reset overflow status flags
+	 */
+	flags = armv7_pmnc_getreset_flags();
+
+	/*
+	 * Cycle counter
+	 */
+	if (flags & FLAG_C) {
+		u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), CCNT);
+		armv7_pmnc_reset_counter(CCNT);
+		oprofile_add_sample(regs, cpu_cnt);
+	}
+
+	/*
+	 * PMNC counters 0:3
+	 */
+	for (cnt = CNT0; cnt < CNTMAX; cnt++) {
+		if (flags & (1 << (cnt - CNT0))) {
+			u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
+			armv7_pmnc_reset_counter(cnt);
+			oprofile_add_sample(regs, cpu_cnt);
+		}
+	}
+
+	/*
+	 * Allow IRQ generation
+	 */
+	armv7_start_pmnc();
+
+	return IRQ_HANDLED;
+}
+
+int armv7_request_interrupts(int *irqs, int nr)
+{
+	unsigned int i;
+	int ret = 0;
+
+	for (i = 0; i < nr; i++) {
+		ret = request_irq(irqs[i], armv7_pmnc_interrupt,
+				IRQF_DISABLED, "CP15 PMNC", NULL);
+		if (ret != 0) {
+			printk(KERN_ERR "oprofile: unable to request IRQ%u"
+				" for ARMv7\n",
+			       irqs[i]);
+			break;
+		}
+	}
+
+	if (i != nr)
+		while (i-- != 0)
+			free_irq(irqs[i], NULL);
+
+	return ret;
+}
+
+void armv7_release_interrupts(int *irqs, int nr)
+{
+	unsigned int i;
+
+	for (i = 0; i < nr; i++)
+		free_irq(irqs[i], NULL);
+}
+
+#ifdef DEBUG
+static void armv7_pmnc_dump_regs(void)
+{
+	u32 val;
+	unsigned int cnt;
+
+	printk(KERN_INFO "PMNC registers dump:\n");
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+	printk(KERN_INFO "PMNC  =0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
+	printk(KERN_INFO "CNTENS=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
+	printk(KERN_INFO "INTENS=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+	printk(KERN_INFO "FLAGS =0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
+	printk(KERN_INFO "SELECT=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
+	printk(KERN_INFO "CCNT  =0x%08x\n", val);
+
+	for (cnt = CNT0; cnt < CNTMAX; cnt++) {
+		armv7_pmnc_select_counter(cnt);
+		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
+		printk(KERN_INFO "CNT[%d] count =0x%08x\n", cnt-CNT0, val);
+		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
+		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", cnt-CNT0, val);
+	}
+}
+#endif
+
+
+static int irqs[] = {
+#ifdef CONFIG_ARCH_OMAP3
+	INT_34XX_BENCH_MPU_EMUL,
+#endif
+};
+
+static void armv7_pmnc_stop(void)
+{
+#ifdef DEBUG
+	armv7_pmnc_dump_regs();
+#endif
+	armv7_stop_pmnc();
+	armv7_release_interrupts(irqs, ARRAY_SIZE(irqs));
+}
+
+static int armv7_pmnc_start(void)
+{
+	int ret;
+
+#ifdef DEBUG
+	armv7_pmnc_dump_regs();
+#endif
+	ret = armv7_request_interrupts(irqs, ARRAY_SIZE(irqs));
+	if (ret >= 0)
+		armv7_start_pmnc();
+
+	return ret;
+}
+
+static int armv7_detect_pmnc(void)
+{
+	return 0;
+}
+
+struct op_arm_model_spec op_armv7_spec = {
+	.init		= armv7_detect_pmnc,
+	.num_counters	= 5,
+	.setup_ctrs	= armv7_setup_pmnc,
+	.start		= armv7_pmnc_start,
+	.stop		= armv7_pmnc_stop,
+	.name		= "arm/armv7",
+};
diff --git a/arch/arm/oprofile/op_model_v7.h b/arch/arm/oprofile/op_model_v7.h
new file mode 100644
index 0000000..0e19bcc
--- /dev/null
+++ b/arch/arm/oprofile/op_model_v7.h
@@ -0,0 +1,103 @@
+/**
+ * op_model_v7.h
+ * ARM v7 (Cortex A8) Event Monitor Driver
+ *
+ * Copyright 2008 Jean Pihet <jpihet@mvista.com>
+ * Copyright 2004 ARM SMP Development Team
+ * Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * Copyright 2000-2004 MontaVista Software Inc
+ * Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * Copyright 2004 Intel Corporation
+ * Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * Copyright 2004 Oprofile Authors
+ *
+ * Read the file COPYING
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OP_MODEL_V7_H
+#define OP_MODEL_V7_H
+
+/*
+ * Per-CPU PMNC: config reg
+ */
+#define PMNC_E		(1 << 0)	/* Enable all counters */
+#define PMNC_P		(1 << 1)	/* Reset all counters */
+#define PMNC_C		(1 << 2)	/* Cycle counter reset */
+#define PMNC_D		(1 << 3)	/* CCNT counts every 64th cpu cycle */
+#define PMNC_X		(1 << 4)	/* Export to ETM */
+#define PMNC_DP		(1 << 5)	/* Disable CCNT if non-invasive debug*/
+#define	PMNC_MASK	0x3f		/* Mask for writable bits */
+
+/*
+ * Available counters
+ */
+#define CCNT 		0
+#define CNT0 		1
+#define CNT1 		2
+#define CNT2 		3
+#define CNT3 		4
+#define CNTMAX 		5
+
+#define CPU_COUNTER(cpu, counter)	((cpu) * CNTMAX + (counter))
+
+/*
+ * CNTENS: counters enable reg
+ */
+#define CNTENS_P0	(1 << 0)
+#define CNTENS_P1	(1 << 1)
+#define CNTENS_P2	(1 << 2)
+#define CNTENS_P3	(1 << 3)
+#define CNTENS_C	(1 << 31)
+#define	CNTENS_MASK	0x8000000f	/* Mask for writable bits */
+
+/*
+ * CNTENC: counters disable reg
+ */
+#define CNTENC_P0	(1 << 0)
+#define CNTENC_P1	(1 << 1)
+#define CNTENC_P2	(1 << 2)
+#define CNTENC_P3	(1 << 3)
+#define CNTENC_C	(1 << 31)
+#define	CNTENC_MASK	0x8000000f	/* Mask for writable bits */
+
+/*
+ * INTENS: counters overflow interrupt enable reg
+ */
+#define INTENS_P0	(1 << 0)
+#define INTENS_P1	(1 << 1)
+#define INTENS_P2	(1 << 2)
+#define INTENS_P3	(1 << 3)
+#define INTENS_C	(1 << 31)
+#define	INTENS_MASK	0x8000000f	/* Mask for writable bits */
+
+/*
+ * EVTSEL: Event selection reg
+ */
+#define	EVTSEL_MASK	0x7f		/* Mask for writable bits */
+
+/*
+ * SELECT: Counter selection reg
+ */
+#define	SELECT_MASK	0x1f		/* Mask for writable bits */
+
+/*
+ * FLAG: counters overflow flag status reg
+ */
+#define FLAG_P0		(1 << 0)
+#define FLAG_P1		(1 << 1)
+#define FLAG_P2		(1 << 2)
+#define FLAG_P3		(1 << 3)
+#define FLAG_C		(1 << 31)
+#define	FLAG_MASK	0x8000000f	/* Mask for writable bits */
+
+
+int armv7_setup_pmu(void);
+int armv7_start_pmu(void);
+int armv7_stop_pmu(void);
+int armv7_request_interrupts(int *, int);
+void armv7_release_interrupts(int *, int);
+
+#endif
diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c
index 7c3289c..724ab9c 100644
--- a/arch/arm/oprofile/op_model_xscale.c
+++ b/arch/arm/oprofile/op_model_xscale.c
@@ -22,7 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/system.h>
+#include <asm/cputype.h>
 
 #include "op_counter.h"
 #include "op_arm_model.h"
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
index 6dcbcc4..4efe392 100644
--- a/arch/arm/plat-iop/i2c.c
+++ b/arch/arm/plat-iop/i2c.c
@@ -18,7 +18,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
index 39dcfb4..ed0bbec 100644
--- a/arch/arm/plat-iop/io.c
+++ b/arch/arm/plat-iop/io.c
@@ -18,8 +18,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
 	unsigned int mtype)
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 54708bf..77fa7cc 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -17,7 +17,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/system.h>
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index c53fefb..3695bbe 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,8 +18,8 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/timex.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index e14eaad..b2a7e3f 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -23,4 +23,15 @@ source "arch/arm/mach-mx3/Kconfig"
 
 endmenu
 
+config MXC_IRQ_PRIOR
+	bool "Use IRQ priority"
+	depends on ARCH_MXC
+	help
+	  Select this if you want to use prioritized IRQ handling.
+	  This feature prevents higher priority ISR to be interrupted
+	  by lower priority IRQ even IRQF_DISABLED flag is not set.
+	  This may be useful in embedded applications, where are strong
+	  requirements for timing.
+	  Say N here, unless you have a specialized requirement.
+
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index db66e9a..067556f 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,6 +3,6 @@
 #
 
 # Common support
-obj-y := irq.o clock.o gpio.o time.o
+obj-y := irq.o clock.o gpio.o time.o devices.o
 
-obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o
+obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
new file mode 100644
index 0000000..c667482
--- /dev/null
+++ b/arch/arm/plat-mxc/devices.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+int __init mxc_register_device(struct platform_device *pdev, void *data)
+{
+	int ret;
+
+	pdev->dev.platform_data = data;
+
+	ret = platform_device_register(pdev);
+	if (ret)
+		pr_debug("Unable to register platform device '%s': %d\n",
+			 pdev->name, ret);
+
+	return ret;
+}
+
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
new file mode 100644
index 0000000..b296f19
--- /dev/null
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -0,0 +1,840 @@
+/*
+ *  linux/arch/arm/plat-mxc/dma-mx1-mx2.c
+ *
+ *  i.MX DMA registration and IRQ dispatching
+ *
+ * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
+ * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/dma.h>
+#include <mach/dma-mx1-mx2.h>
+
+#define DMA_DCR     0x00		/* Control Register */
+#define DMA_DISR    0x04		/* Interrupt status Register */
+#define DMA_DIMR    0x08		/* Interrupt mask Register */
+#define DMA_DBTOSR  0x0c		/* Burst timeout status Register */
+#define DMA_DRTOSR  0x10		/* Request timeout Register */
+#define DMA_DSESR   0x14		/* Transfer Error Status Register */
+#define DMA_DBOSR   0x18		/* Buffer overflow status Register */
+#define DMA_DBTOCR  0x1c		/* Burst timeout control Register */
+#define DMA_WSRA    0x40		/* W-Size Register A */
+#define DMA_XSRA    0x44		/* X-Size Register A */
+#define DMA_YSRA    0x48		/* Y-Size Register A */
+#define DMA_WSRB    0x4c		/* W-Size Register B */
+#define DMA_XSRB    0x50		/* X-Size Register B */
+#define DMA_YSRB    0x54		/* Y-Size Register B */
+#define DMA_SAR(x)  (0x80 + ((x) << 6))	/* Source Address Registers */
+#define DMA_DAR(x)  (0x84 + ((x) << 6))	/* Destination Address Registers */
+#define DMA_CNTR(x) (0x88 + ((x) << 6))	/* Count Registers */
+#define DMA_CCR(x)  (0x8c + ((x) << 6))	/* Control Registers */
+#define DMA_RSSR(x) (0x90 + ((x) << 6))	/* Request source select Registers */
+#define DMA_BLR(x)  (0x94 + ((x) << 6))	/* Burst length Registers */
+#define DMA_RTOR(x) (0x98 + ((x) << 6))	/* Request timeout Registers */
+#define DMA_BUCR(x) (0x98 + ((x) << 6))	/* Bus Utilization Registers */
+#define DMA_CCNR(x) (0x9C + ((x) << 6))	/* Channel counter Registers */
+
+#define DCR_DRST           (1<<1)
+#define DCR_DEN            (1<<0)
+#define DBTOCR_EN          (1<<15)
+#define DBTOCR_CNT(x)      ((x) & 0x7fff)
+#define CNTR_CNT(x)        ((x) & 0xffffff)
+#define CCR_ACRPT          (1<<14)
+#define CCR_DMOD_LINEAR    (0x0 << 12)
+#define CCR_DMOD_2D        (0x1 << 12)
+#define CCR_DMOD_FIFO      (0x2 << 12)
+#define CCR_DMOD_EOBFIFO   (0x3 << 12)
+#define CCR_SMOD_LINEAR    (0x0 << 10)
+#define CCR_SMOD_2D        (0x1 << 10)
+#define CCR_SMOD_FIFO      (0x2 << 10)
+#define CCR_SMOD_EOBFIFO   (0x3 << 10)
+#define CCR_MDIR_DEC       (1<<9)
+#define CCR_MSEL_B         (1<<8)
+#define CCR_DSIZ_32        (0x0 << 6)
+#define CCR_DSIZ_8         (0x1 << 6)
+#define CCR_DSIZ_16        (0x2 << 6)
+#define CCR_SSIZ_32        (0x0 << 4)
+#define CCR_SSIZ_8         (0x1 << 4)
+#define CCR_SSIZ_16        (0x2 << 4)
+#define CCR_REN            (1<<3)
+#define CCR_RPT            (1<<2)
+#define CCR_FRC            (1<<1)
+#define CCR_CEN            (1<<0)
+#define RTOR_EN            (1<<15)
+#define RTOR_CLK           (1<<14)
+#define RTOR_PSC           (1<<13)
+
+/*
+ * struct imx_dma_channel - i.MX specific DMA extension
+ * @name: name specified by DMA client
+ * @irq_handler: client callback for end of transfer
+ * @err_handler: client callback for error condition
+ * @data: clients context data for callbacks
+ * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
+ * @sg: pointer to the actual read/written chunk for scatter-gather emulation
+ * @resbytes: total residual number of bytes to transfer
+ *            (it can be lower or same as sum of SG mapped chunk sizes)
+ * @sgcount: number of chunks to be read/written
+ *
+ * Structure is used for IMX DMA processing. It would be probably good
+ * @struct dma_struct in the future for external interfacing and use
+ * @struct imx_dma_channel only as extension to it.
+ */
+
+struct imx_dma_channel {
+	const char *name;
+	void (*irq_handler) (int, void *);
+	void (*err_handler) (int, void *, int errcode);
+	void (*prog_handler) (int, void *, struct scatterlist *);
+	void *data;
+	dmamode_t  dma_mode;
+	struct scatterlist *sg;
+	unsigned int resbytes;
+	int dma_num;
+
+	int in_use;
+
+	u32 ccr_from_device;
+	u32 ccr_to_device;
+
+	struct timer_list watchdog;
+
+	int hw_chaining;
+};
+
+static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
+
+static struct clk *dma_clk;
+
+static int imx_dma_hw_chain(struct imx_dma_channel *imxdma)
+{
+	if (cpu_is_mx27())
+		return imxdma->hw_chaining;
+	else
+		return 0;
+}
+
+
+/*
+ * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
+ */
+static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long now;
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return 0;
+	}
+
+	now = min(imxdma->resbytes, sg->length);
+	imxdma->resbytes -= now;
+
+	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
+		__raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
+	else
+		__raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel));
+
+	__raw_writel(now, DMA_BASE + DMA_CNTR(channel));
+
+	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
+		"size 0x%08x\n", channel,
+		 __raw_readl(DMA_BASE + DMA_DAR(channel)),
+		 __raw_readl(DMA_BASE + DMA_SAR(channel)),
+		 __raw_readl(DMA_BASE + DMA_CNTR(channel)));
+
+	return now;
+}
+
+/**
+ * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from
+ * device transfer
+ *
+ * @channel: i.MX DMA channel number
+ * @dma_address: the DMA/physical memory address of the linear data block
+ *		to transfer
+ * @dma_length: length of the data block in bytes
+ * @dev_addr: physical device port address
+ * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
+ *           or %DMA_MODE_WRITE from memory to the device
+ *
+ * Return value: if incorrect parameters are provided -%EINVAL.
+ *		Zero indicates success.
+ */
+int
+imx_dma_setup_single(int channel, dma_addr_t dma_address,
+		     unsigned int dma_length, unsigned int dev_addr,
+		     dmamode_t dmamode)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+	imxdma->sg = NULL;
+	imxdma->dma_mode = dmamode;
+
+	if (!dma_address) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if (!dma_length) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
+		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
+			"dev_addr=0x%08x for read\n",
+			channel, __func__, (unsigned int)dma_address,
+			dma_length, dev_addr);
+
+		__raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
+		__raw_writel(dma_address, DMA_BASE + DMA_DAR(channel));
+		__raw_writel(imxdma->ccr_from_device,
+				DMA_BASE + DMA_CCR(channel));
+	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
+		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
+			"dev_addr=0x%08x for write\n",
+			channel, __func__, (unsigned int)dma_address,
+			dma_length, dev_addr);
+
+		__raw_writel(dma_address, DMA_BASE + DMA_SAR(channel));
+		__raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
+		__raw_writel(imxdma->ccr_to_device,
+				DMA_BASE + DMA_CCR(channel));
+	} else {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	__raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel));
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_single);
+
+/**
+ * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
+ * @channel: i.MX DMA channel number
+ * @sg: pointer to the scatter-gather list/vector
+ * @sgcount: scatter-gather list hungs count
+ * @dma_length: total length of the transfer request in bytes
+ * @dev_addr: physical device port address
+ * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
+ *           or %DMA_MODE_WRITE from memory to the device
+ *
+ * The function sets up DMA channel state and registers to be ready for
+ * transfer specified by provided parameters. The scatter-gather emulation
+ * is set up according to the parameters.
+ *
+ * The full preparation of the transfer requires setup of more register
+ * by the caller before imx_dma_enable() can be called.
+ *
+ * %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes
+ *
+ * %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx
+ *
+ * %CCR(channel) has to specify transfer parameters, the next settings is
+ * typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is
+ * specified
+ *
+ * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
+ *
+ * The typical setup for %DMA_MODE_WRITE is specified by next options
+ * combination
+ *
+ * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
+ *
+ * Be careful here and do not mistakenly mix source and target device
+ * port sizes constants, they are really different:
+ * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
+ * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
+ *
+ * Return value: if incorrect parameters are provided -%EINVAL.
+ * Zero indicates success.
+ */
+int
+imx_dma_setup_sg(int channel,
+		 struct scatterlist *sg, unsigned int sgcount,
+		 unsigned int dma_length, unsigned int dev_addr,
+		 dmamode_t dmamode)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+	if (imxdma->in_use)
+		return -EBUSY;
+
+	imxdma->sg = sg;
+	imxdma->dma_mode = dmamode;
+	imxdma->resbytes = dma_length;
+
+	if (!sg || !sgcount) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if (!sg->length) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
+		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
+			"dev_addr=0x%08x for read\n",
+			channel, __func__, sg, sgcount, dma_length, dev_addr);
+
+		__raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
+		__raw_writel(imxdma->ccr_from_device,
+				DMA_BASE + DMA_CCR(channel));
+	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
+		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
+			"dev_addr=0x%08x for write\n",
+			channel, __func__, sg, sgcount, dma_length, dev_addr);
+
+		__raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
+		__raw_writel(imxdma->ccr_to_device,
+				DMA_BASE + DMA_CCR(channel));
+	} else {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	imx_dma_sg_next(channel, sg);
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_sg);
+
+int
+imx_dma_config_channel(int channel, unsigned int config_port,
+	unsigned int config_mem, unsigned int dmareq, int hw_chaining)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	u32 dreq = 0;
+
+	imxdma->hw_chaining = 0;
+
+	if (hw_chaining) {
+		imxdma->hw_chaining = 1;
+		if (!imx_dma_hw_chain(imxdma))
+			return -EINVAL;
+	}
+
+	if (dmareq)
+		dreq = CCR_REN;
+
+	imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
+	imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
+
+	__raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel));
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_config_channel);
+
+void imx_dma_config_burstlen(int channel, unsigned int burstlen)
+{
+	__raw_writel(burstlen, DMA_BASE + DMA_BLR(channel));
+}
+EXPORT_SYMBOL(imx_dma_config_burstlen);
+
+/**
+ * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification
+ * handlers
+ * @channel: i.MX DMA channel number
+ * @irq_handler: the pointer to the function called if the transfer
+ *		ends successfully
+ * @err_handler: the pointer to the function called if the premature
+ *		end caused by error occurs
+ * @data: user specified value to be passed to the handlers
+ */
+int
+imx_dma_setup_handlers(int channel,
+		       void (*irq_handler) (int, void *),
+		       void (*err_handler) (int, void *, int),
+		       void *data)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return -ENODEV;
+	}
+
+	local_irq_save(flags);
+	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+	imxdma->irq_handler = irq_handler;
+	imxdma->err_handler = err_handler;
+	imxdma->data = data;
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_handlers);
+
+/**
+ * imx_dma_setup_progression_handler - setup i.MX DMA channel progression
+ * handlers
+ * @channel: i.MX DMA channel number
+ * @prog_handler: the pointer to the function called if the transfer progresses
+ */
+int
+imx_dma_setup_progression_handler(int channel,
+			void (*prog_handler) (int, void*, struct scatterlist*))
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return -ENODEV;
+	}
+
+	local_irq_save(flags);
+	imxdma->prog_handler = prog_handler;
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_progression_handler);
+
+/**
+ * imx_dma_enable - function to start i.MX DMA channel operation
+ * @channel: i.MX DMA channel number
+ *
+ * The channel has to be allocated by driver through imx_dma_request()
+ * or imx_dma_request_by_prio() function.
+ * The transfer parameters has to be set to the channel registers through
+ * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
+ * and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to
+ * be set prior this function call by the channel user.
+ */
+void imx_dma_enable(int channel)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	pr_debug("imxdma%d: imx_dma_enable\n", channel);
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return;
+	}
+
+	if (imxdma->in_use)
+		return;
+
+	local_irq_save(flags);
+
+	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel),
+		DMA_BASE + DMA_DIMR);
+	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN |
+		CCR_ACRPT,
+		DMA_BASE + DMA_CCR(channel));
+
+#ifdef CONFIG_ARCH_MX2
+	if (imxdma->sg && imx_dma_hw_chain(imxdma)) {
+		imxdma->sg = sg_next(imxdma->sg);
+		if (imxdma->sg) {
+			u32 tmp;
+			imx_dma_sg_next(channel, imxdma->sg);
+			tmp = __raw_readl(DMA_BASE + DMA_CCR(channel));
+			__raw_writel(tmp | CCR_RPT | CCR_ACRPT,
+				DMA_BASE + DMA_CCR(channel));
+		}
+	}
+#endif
+	imxdma->in_use = 1;
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_enable);
+
+/**
+ * imx_dma_disable - stop, finish i.MX DMA channel operatin
+ * @channel: i.MX DMA channel number
+ */
+void imx_dma_disable(int channel)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	pr_debug("imxdma%d: imx_dma_disable\n", channel);
+
+	if (imx_dma_hw_chain(imxdma))
+		del_timer(&imxdma->watchdog);
+
+	local_irq_save(flags);
+	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
+		DMA_BASE + DMA_DIMR);
+	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
+		DMA_BASE + DMA_CCR(channel));
+	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+	imxdma->in_use = 0;
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_disable);
+
+static void imx_dma_watchdog(unsigned long chno)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
+
+	__raw_writel(0, DMA_BASE + DMA_CCR(chno));
+	imxdma->in_use = 0;
+	imxdma->sg = NULL;
+
+	if (imxdma->err_handler)
+		imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
+}
+
+static irqreturn_t dma_err_handler(int irq, void *dev_id)
+{
+	int i, disr;
+	struct imx_dma_channel *imxdma;
+	unsigned int err_mask;
+	int errcode;
+
+	disr = __raw_readl(DMA_BASE + DMA_DISR);
+
+	err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) |
+		   __raw_readl(DMA_BASE + DMA_DRTOSR) |
+		   __raw_readl(DMA_BASE + DMA_DSESR)  |
+		   __raw_readl(DMA_BASE + DMA_DBOSR);
+
+	if (!err_mask)
+		return IRQ_HANDLED;
+
+	__raw_writel(disr & err_mask, DMA_BASE + DMA_DISR);
+
+	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+		if (!(err_mask & (1 << i)))
+			continue;
+		imxdma = &imx_dma_channels[i];
+		errcode = 0;
+
+		if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) {
+			__raw_writel(1 << i, DMA_BASE + DMA_DBTOSR);
+			errcode |= IMX_DMA_ERR_BURST;
+		}
+		if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) {
+			__raw_writel(1 << i, DMA_BASE + DMA_DRTOSR);
+			errcode |= IMX_DMA_ERR_REQUEST;
+		}
+		if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) {
+			__raw_writel(1 << i, DMA_BASE + DMA_DSESR);
+			errcode |= IMX_DMA_ERR_TRANSFER;
+		}
+		if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) {
+			__raw_writel(1 << i, DMA_BASE + DMA_DBOSR);
+			errcode |= IMX_DMA_ERR_BUFFER;
+		}
+		if (imxdma->name && imxdma->err_handler) {
+			imxdma->err_handler(i, imxdma->data, errcode);
+			continue;
+		}
+
+		imx_dma_channels[i].sg = NULL;
+
+		printk(KERN_WARNING
+		       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
+		       i, imxdma->name,
+		       errcode & IMX_DMA_ERR_BURST ?    " burst" : "",
+		       errcode & IMX_DMA_ERR_REQUEST ?  " request" : "",
+		       errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
+		       errcode & IMX_DMA_ERR_BUFFER ?   " buffer" : "");
+	}
+	return IRQ_HANDLED;
+}
+
+static void dma_irq_handle_channel(int chno)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
+
+	if (!imxdma->name) {
+		/*
+		 * IRQ for an unregistered DMA channel:
+		 * let's clear the interrupts and disable it.
+		 */
+		printk(KERN_WARNING
+		       "spurious IRQ for DMA channel %d\n", chno);
+		return;
+	}
+
+	if (imxdma->sg) {
+		u32 tmp;
+		struct scatterlist *current_sg = imxdma->sg;
+		imxdma->sg = sg_next(imxdma->sg);
+
+		if (imxdma->sg) {
+			imx_dma_sg_next(chno, imxdma->sg);
+
+			tmp = __raw_readl(DMA_BASE + DMA_CCR(chno));
+
+			if (imx_dma_hw_chain(imxdma)) {
+				/* FIXME: The timeout should probably be
+				 * configurable
+				 */
+				mod_timer(&imxdma->watchdog,
+					jiffies + msecs_to_jiffies(500));
+
+				tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
+				__raw_writel(tmp, DMA_BASE +
+						DMA_CCR(chno));
+			} else {
+				__raw_writel(tmp & ~CCR_CEN, DMA_BASE +
+						DMA_CCR(chno));
+				tmp |= CCR_CEN;
+			}
+
+			__raw_writel(tmp, DMA_BASE + DMA_CCR(chno));
+
+			if (imxdma->prog_handler)
+				imxdma->prog_handler(chno, imxdma->data,
+						current_sg);
+
+			return;
+		}
+
+		if (imx_dma_hw_chain(imxdma)) {
+			del_timer(&imxdma->watchdog);
+			return;
+		}
+	}
+
+	__raw_writel(0, DMA_BASE + DMA_CCR(chno));
+	imxdma->in_use = 0;
+	if (imxdma->irq_handler)
+		imxdma->irq_handler(chno, imxdma->data);
+}
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id)
+{
+	int i, disr;
+
+#ifdef CONFIG_ARCH_MX2
+	dma_err_handler(irq, dev_id);
+#endif
+
+	disr = __raw_readl(DMA_BASE + DMA_DISR);
+
+	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
+		     disr);
+
+	__raw_writel(disr, DMA_BASE + DMA_DISR);
+	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+		if (disr & (1 << i))
+			dma_irq_handle_channel(i);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * imx_dma_request - request/allocate specified channel number
+ * @channel: i.MX DMA channel number
+ * @name: the driver/caller own non-%NULL identification
+ */
+int imx_dma_request(int channel, const char *name)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+	int ret;
+
+	/* basic sanity checks */
+	if (!name)
+		return -EINVAL;
+
+	if (channel >= IMX_DMA_CHANNELS) {
+		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
+		       __func__, channel);
+		return -EINVAL;
+	}
+
+	local_irq_save(flags);
+	if (imxdma->name) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+#ifdef CONFIG_ARCH_MX2
+	ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
+			NULL);
+	if (ret) {
+		printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
+				MXC_INT_DMACH0 + channel, channel);
+		return ret;
+	}
+	init_timer(&imxdma->watchdog);
+	imxdma->watchdog.function = &imx_dma_watchdog;
+	imxdma->watchdog.data = channel;
+#endif
+
+	imxdma->name = name;
+	imxdma->irq_handler = NULL;
+	imxdma->err_handler = NULL;
+	imxdma->data = NULL;
+	imxdma->sg = NULL;
+
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_request);
+
+/**
+ * imx_dma_free - release previously acquired channel
+ * @channel: i.MX DMA channel number
+ */
+void imx_dma_free(int channel)
+{
+	unsigned long flags;
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT
+		       "%s: trying to free free channel %d\n",
+		       __func__, channel);
+		return;
+	}
+
+	local_irq_save(flags);
+	/* Disable interrupts */
+	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
+		DMA_BASE + DMA_DIMR);
+	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
+		DMA_BASE + DMA_CCR(channel));
+	imxdma->name = NULL;
+
+#ifdef CONFIG_ARCH_MX2
+	free_irq(MXC_INT_DMACH0 + channel, NULL);
+#endif
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_free);
+
+/**
+ * imx_dma_request_by_prio - find and request some of free channels best
+ * suiting requested priority
+ * @channel: i.MX DMA channel number
+ * @name: the driver/caller own non-%NULL identification
+ *
+ * This function tries to find a free channel in the specified priority group
+ * This function tries to find a free channel in the specified priority group
+ * if the priority cannot be achieved it tries to look for free channel
+ * in the higher and then even lower priority groups.
+ *
+ * Return value: If there is no free channel to allocate, -%ENODEV is returned.
+ *               On successful allocation channel is returned.
+ */
+int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio)
+{
+	int i;
+	int best;
+
+	switch (prio) {
+	case (DMA_PRIO_HIGH):
+		best = 8;
+		break;
+	case (DMA_PRIO_MEDIUM):
+		best = 4;
+		break;
+	case (DMA_PRIO_LOW):
+	default:
+		best = 0;
+		break;
+	}
+
+	for (i = best; i < IMX_DMA_CHANNELS; i++)
+		if (!imx_dma_request(i, name))
+			return i;
+
+	for (i = best - 1; i >= 0; i--)
+		if (!imx_dma_request(i, name))
+			return i;
+
+	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL(imx_dma_request_by_prio);
+
+static int __init imx_dma_init(void)
+{
+	int ret = 0;
+	int i;
+
+	dma_clk = clk_get(NULL, "dma_clk");
+	clk_enable(dma_clk);
+
+	/* reset DMA module */
+	__raw_writel(DCR_DRST, DMA_BASE + DMA_DCR);
+
+#ifdef CONFIG_ARCH_MX1
+	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+	if (ret) {
+		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
+		return ret;
+	}
+
+	ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
+	if (ret) {
+		printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
+		free_irq(DMA_INT, NULL);
+		return ret;
+	}
+#endif
+	/* enable DMA module */
+	__raw_writel(DCR_DEN, DMA_BASE + DMA_DCR);
+
+	/* clear all interrupts */
+	__raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR);
+
+	/* disable interrupts */
+	__raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR);
+
+	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+		imx_dma_channels[i].sg = NULL;
+		imx_dma_channels[i].dma_num = i;
+	}
+
+	return ret;
+}
+
+arch_initcall(imx_dma_init);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 1bc6fb0..745b488 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -90,6 +90,9 @@
 #define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
 
+#define MXC_EXP_IO_BASE		(MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
 #define EXPIO_INT_LOW_BAT	(MXC_EXP_IO_BASE + 0)
 #define EXPIO_INT_PB_IRQ	(MXC_EXP_IO_BASE + 1)
 #define EXPIO_INT_OTG_FS_OVR	(MXC_EXP_IO_BASE + 2)
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 24caa2b..d21f78e 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -39,7 +39,7 @@ struct clk {
 	/* Register bit position for clock's enable/disable control. */
 	u8 enable_shift;
 	/* Register address for clock's enable/disable control. */
-	u32 enable_reg;
+	void __iomem *enable_reg;
 	u32 flags;
 	/* get the current clock rate (always a fresh value) */
 	unsigned long (*get_rate) (struct clk *);
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index a6d2e24..6350287 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -11,10 +11,13 @@
 #ifndef __ASM_ARCH_MXC_COMMON_H__
 #define __ASM_ARCH_MXC_COMMON_H__
 
+struct platform_device;
+
 extern void mxc_map_io(void);
 extern void mxc_init_irq(void);
 extern void mxc_timer_init(const char *clk_timer);
 extern int mxc_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
+extern int mxc_register_device(struct platform_device *pdev, void *data);
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
new file mode 100644
index 0000000..e85fd94
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -0,0 +1,89 @@
+/*
+ *  linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+ *
+ *  i.MX DMA registration and IRQ dispatching
+ *
+ * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
+ * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <asm/dma.h>
+
+#ifndef __ASM_ARCH_MXC_DMA_H
+#define __ASM_ARCH_MXC_DMA_H
+
+#define IMX_DMA_CHANNELS  16
+
+#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
+
+#define IMX_DMA_MEMSIZE_32	(0 << 4)
+#define IMX_DMA_MEMSIZE_8	(1 << 4)
+#define IMX_DMA_MEMSIZE_16	(2 << 4)
+#define IMX_DMA_TYPE_LINEAR	(0 << 10)
+#define IMX_DMA_TYPE_2D		(1 << 10)
+#define IMX_DMA_TYPE_FIFO	(2 << 10)
+
+#define IMX_DMA_ERR_BURST     (1 << 0)
+#define IMX_DMA_ERR_REQUEST   (1 << 1)
+#define IMX_DMA_ERR_TRANSFER  (1 << 2)
+#define IMX_DMA_ERR_BUFFER    (1 << 3)
+#define IMX_DMA_ERR_TIMEOUT   (1 << 4)
+
+int
+imx_dma_config_channel(int channel, unsigned int config_port,
+	unsigned int config_mem, unsigned int dmareq, int hw_chaining);
+
+void
+imx_dma_config_burstlen(int channel, unsigned int burstlen);
+
+int
+imx_dma_setup_single(int channel, dma_addr_t dma_address,
+		unsigned int dma_length, unsigned int dev_addr,
+		dmamode_t dmamode);
+
+int
+imx_dma_setup_sg(int channel, struct scatterlist *sg,
+		unsigned int sgcount, unsigned int dma_length,
+		unsigned int dev_addr, dmamode_t dmamode);
+
+int
+imx_dma_setup_handlers(int channel,
+		void (*irq_handler) (int, void *),
+		void (*err_handler) (int, void *, int), void *data);
+
+int
+imx_dma_setup_progression_handler(int channel,
+		void (*prog_handler) (int, void*, struct scatterlist*));
+
+void imx_dma_enable(int channel);
+
+void imx_dma_disable(int channel);
+
+int imx_dma_request(int channel, const char *name);
+
+void imx_dma_free(int channel);
+
+enum imx_dma_prio {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+};
+
+int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
+
+#endif	/* _ASM_ARCH_MXC_DMA_H */
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index b542433..1163202 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,11 +9,17 @@
  * published by the Free Software Foundation.
  */
 
+#define AVIC_NIMASK	0x04
+
 	@ this macro disables fast irq (not implemented)
 	.macro	disable_fiq
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+#ifdef CONFIG_MXC_IRQ_PRIOR
+	ldr	r4, [\base, #AVIC_NIMASK]
+#endif
 	.endm
 
 	.macro  arch_ret_to_user, tmp1, tmp2
@@ -23,7 +29,6 @@
 	@ and returns its number in irqnr
 	@ and returns if an interrupt occured in irqstat
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
 	@ Load offset & priority of the highest priority
 	@ interrupt pending from AVIC_NIVECSR
 	ldr	\irqstat, [\base, #0x40]
@@ -32,6 +37,11 @@
 	mov	\irqnr, \irqstat, asr #16
 	@ set zero flag if IRQ + 1 == 0
 	adds	\tmp, \irqnr, #1
+#ifdef CONFIG_MXC_IRQ_PRIOR
+	bicne	\tmp, \irqstat, #0xFFFFFFE0
+	strne	\tmp, [\base, #AVIC_NIMASK]
+	streq	r4, [\base, #AVIC_NIMASK]
+#endif
 	.endm
 
 	@ irq priority table (not used)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
index 076d37b..3d09bfd 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
@@ -247,6 +247,11 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #endif
 
 #ifdef CONFIG_ARCH_MX2
+#define PA0_PF_USBH2_CLK	(GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR	(GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7	(GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT	(GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP	(GPIO_PORTA | GPIO_PF | 4)
 #define PA5_PF_LSCLK		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
 #define PA6_PF_LD0		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
 #define PA7_PF_LD1		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
@@ -294,6 +299,16 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PB20_AF_UART5_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
 #define PB21_PF_CSI_HSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
 #define PB21_AF_UART5_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 21)
+#define PB22_PF_USBH1_SUSP	(GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USB_PWR		(GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC_B	(GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBH1_RCV	(GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBH1_FS	(GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE_B	(GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM	(GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP	(GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM	(GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP	(GPIO_PORTB | GPIO_PF | 31)
 #define PB26_AF_UART4_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_PF | 26)
 #define PB28_AF_UART4_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
 #define PB29_AF_UART4_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
@@ -335,8 +350,15 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
 #define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
 #define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PD19_AF_USBH2_DATA4	(GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3	(GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6	(GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0	(GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2	(GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1	(GPIO_PORTD | GPIO_AF | 24)
 #define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 25)
 #define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 26)
+#define PD26_AF_USBH2_DATA5     (GPIO_PORTD | GPIO_AF | 26)
 #define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 27)
 #define PD28_PF_CSPI1_SS0	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 28)
 #define PD29_PF_CSPI1_SCLK	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 29)
@@ -355,6 +377,8 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 13)
 #define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
 #define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 15)
+#define PE16_AF_RTCK		(GPIO_PORTE | GPIO_OUT | GPIO_AF | 16)
+#define PE16_PF_RTCK		(GPIO_PORTE | GPIO_OUT | GPIO_PF | 16)
 #define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_IN  | GPIO_AF | 18)
 #define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
 #define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 7509e76..c9f39c2 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -491,6 +491,26 @@ enum iomux_pins {
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__MOSI	IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_SPI_RDY__SPI_RDY	IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_SS0__SS0		IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_SS1__SS1		IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_SS2__SS2		IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MOSI__MOSI	IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY	IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_SS0__SS0		IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_SS1__SS1		IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_SS2__SS2		IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI3_MOSI__MOSI	IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI3_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI3_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY	IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC)
+/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
+ * cspi1_ss1*/
 
 /*
  * This function configures the pad value for a IOMUX pin.
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 228c4f6..b55bba3 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -12,5 +12,6 @@
 #define __ASM_ARCH_MXC_IRQS_H__
 
 #include <mach/hardware.h>
+extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
 #endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 212ecc2..a86db64 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -128,6 +128,7 @@
  * it returns 0xDEADBEEF
  */
 #define IO_ADDRESS(x)   \
+	(void __iomem *) \
 	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
 		AIPI_IO_ADDRESS(x) : \
 	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index a7373e4..0536f89 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -198,6 +198,7 @@
  * it returns 0xDEADBEEF
  */
 #define IO_ADDRESS(x)   \
+	(void __iomem *) \
 	(((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
 	((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
 	((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 332eda4..f6caab0 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -33,4 +33,10 @@
 # define cpu_is_mx27() (0)
 #endif
 
+#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
+#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
+#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
+#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
+#endif
+
 #endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
new file mode 100644
index 0000000..2b972df
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+struct mxc_nand_platform_data {
+	int width;	/* data bus width in bytes */
+	int hw_ecc;	/* 0 if supress hardware ECC */
+};
+#endif /* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 1053b66..d862c9e 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -18,7 +18,7 @@
  */
 
 #include <linux/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/common.h>
 
 #define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
@@ -30,14 +30,7 @@
 #define AVIC_INTENABLEL		(AVIC_BASE + 0x14)	/* int enable reg low */
 #define AVIC_INTTYPEH		(AVIC_BASE + 0x18)	/* int type reg high */
 #define AVIC_INTTYPEL		(AVIC_BASE + 0x1C)	/* int type reg low */
-#define AVIC_NIPRIORITY7	(AVIC_BASE + 0x20)	/* norm int priority lvl7 */
-#define AVIC_NIPRIORITY6	(AVIC_BASE + 0x24)	/* norm int priority lvl6 */
-#define AVIC_NIPRIORITY5	(AVIC_BASE + 0x28)	/* norm int priority lvl5 */
-#define AVIC_NIPRIORITY4	(AVIC_BASE + 0x2C)	/* norm int priority lvl4 */
-#define AVIC_NIPRIORITY3	(AVIC_BASE + 0x30)	/* norm int priority lvl3 */
-#define AVIC_NIPRIORITY2	(AVIC_BASE + 0x34)	/* norm int priority lvl2 */
-#define AVIC_NIPRIORITY1	(AVIC_BASE + 0x38)	/* norm int priority lvl1 */
-#define AVIC_NIPRIORITY0	(AVIC_BASE + 0x3C)	/* norm int priority lvl0 */
+#define AVIC_NIPRIORITY(x)	(AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
 #define AVIC_NIVECSR		(AVIC_BASE + 0x40)	/* norm int vector/status */
 #define AVIC_FIVECSR		(AVIC_BASE + 0x44)	/* fast int vector/status */
 #define AVIC_INTSRCH		(AVIC_BASE + 0x48)	/* int source reg high */
@@ -54,6 +47,24 @@
 #define IIM_PROD_REV_SH		3
 #define IIM_PROD_REV_LEN	5
 
+#ifdef CONFIG_MXC_IRQ_PRIOR
+void imx_irq_set_priority(unsigned char irq, unsigned char prio)
+{
+	unsigned int temp;
+	unsigned int mask = 0x0F << irq % 8 * 4;
+
+	if (irq > 63)
+		return;
+
+	temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+	temp &= ~mask;
+	temp |= prio & mask;
+
+	__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+}
+EXPORT_SYMBOL(imx_irq_set_priority);
+#endif
+
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
@@ -101,10 +112,9 @@ void __init mxc_init_irq(void)
 		set_irq_flags(i, IRQF_VALID);
 	}
 
-	/* Set WDOG2's interrupt the highest priority level (bit 28-31) */
-	reg = __raw_readl(AVIC_NIPRIORITY6);
-	reg |= (0xF << 28);
-	__raw_writel(reg, AVIC_NIPRIORITY6);
+	/* Set default priority value (0) for all IRQ's */
+	for (i = 0; i < 8; i++)
+		__raw_writel(0, AVIC_NIPRIORITY(i));
 
 	/* init architectures chained interrupt handler */
 	mxc_register_gpios();
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index b917206..a94f0c4 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -15,6 +15,9 @@ config ARCH_OMAP1
 config ARCH_OMAP2
 	bool "TI OMAP2"
 
+config ARCH_OMAP3
+	bool "TI OMAP3"
+
 endchoice
 
 comment "OMAP Feature Selections"
@@ -29,6 +32,30 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS || LEDS_OMAP_DEBUG
 
+config OMAP_DEBUG_POWERDOMAIN
+	bool "Emit debug messages from powerdomain layer"
+	depends on ARCH_OMAP2 || ARCH_OMAP3
+	default n
+	help
+	  Say Y here if you want to compile in powerdomain layer
+	  debugging messages for OMAP2/3.   These messages can
+	  provide more detail as to why some powerdomain calls
+	  may be failing, and will also emit a descriptive message
+	  for every powerdomain register write.  However, the
+	  extra detail costs some memory.
+
+config OMAP_DEBUG_CLOCKDOMAIN
+	bool "Emit debug messages from clockdomain layer"
+	depends on ARCH_OMAP2 || ARCH_OMAP3
+	default n
+	help
+	  Say Y here if you want to compile in clockdomain layer
+	  debugging messages for OMAP2/3.   These messages can
+	  provide more detail as to why some clockdomain calls
+	  may be failing, and will also emit a descriptive message
+	  for every clockdomain register write.  However, the
+	  extra detail costs some memory.
+
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_OMAP
@@ -88,13 +115,13 @@ config OMAP_MPU_TIMER
 
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
 	  support for no tick during idle. The 32KHz timer provides less
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX and 24XX.
+	  currently only available for OMAP16XX, 24XX and 34XX.
 
 endchoice
 
@@ -109,7 +136,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 2c4051c..deaff58 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
-	 usb.o fb.o
+	 usb.o fb.o io.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 197974d..bf6a10c 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -22,8 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
 #include <linux/debugfs.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <mach/clock.h>
 
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index f4dff42..0843b88 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -18,12 +18,12 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <asm/io.h>
 #include <asm/setup.h>
 
 #include <mach/common.h>
@@ -248,6 +248,7 @@ static struct omap_globals *omap2_globals;
 
 static void __init __omap2_set_globals(void)
 {
+	omap2_set_globals_tap(omap2_globals);
 	omap2_set_globals_memory(omap2_globals);
 	omap2_set_globals_control(omap2_globals);
 	omap2_set_globals_prcm(omap2_globals);
@@ -258,12 +259,13 @@ static void __init __omap2_set_globals(void)
 #if defined(CONFIG_ARCH_OMAP2420)
 
 static struct omap_globals omap242x_globals = {
-	.tap	= (__force void __iomem *)OMAP2_IO_ADDRESS(0x48014000),
-	.sdrc	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
-	.sms	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
-	.ctrl	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
-	.prm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
-	.cm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
+	.class	= OMAP242X_CLASS,
+	.tap	= OMAP2_IO_ADDRESS(0x48014000),
+	.sdrc	= OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
+	.sms	= OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
+	.ctrl	= OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
+	.prm	= OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
+	.cm	= OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
 };
 
 void __init omap2_set_globals_242x(void)
@@ -276,12 +278,13 @@ void __init omap2_set_globals_242x(void)
 #if defined(CONFIG_ARCH_OMAP2430)
 
 static struct omap_globals omap243x_globals = {
-	.tap	= (__force void __iomem *)OMAP2_IO_ADDRESS(0x4900a000),
-	.sdrc	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
-	.sms	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
-	.ctrl	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
-	.prm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
-	.cm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
+	.class	= OMAP243X_CLASS,
+	.tap	= OMAP2_IO_ADDRESS(0x4900a000),
+	.sdrc	= OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
+	.sms	= OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
+	.ctrl	= OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
+	.prm	= OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
+	.cm	= OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
 };
 
 void __init omap2_set_globals_243x(void)
@@ -294,12 +297,13 @@ void __init omap2_set_globals_243x(void)
 #if defined(CONFIG_ARCH_OMAP3430)
 
 static struct omap_globals omap343x_globals = {
-	.tap	= (__force void __iomem *)OMAP2_IO_ADDRESS(0x4830A000),
-	.sdrc	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
-	.sms	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
-	.ctrl	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
-	.prm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
-	.cm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
+	.class	= OMAP343X_CLASS,
+	.tap	= OMAP2_IO_ADDRESS(0x4830A000),
+	.sdrc	= OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
+	.sms	= OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
+	.ctrl	= OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
+	.prm	= OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
+	.cm	= OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
 };
 
 void __init omap2_set_globals_343x(void)
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index ae1de30..b269024 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -20,9 +20,9 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #define VERY_HI_RATE	900000000
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 5b73bb2..e31154b 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -12,9 +12,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 #include <mach/board.h>
 #include <mach/gpio.h>
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 9422dee..2f4c0ca 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -11,8 +11,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 01da719..0cb2b22 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -13,24 +13,24 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
 #include <mach/tc.h>
+#include <mach/control.h>
 #include <mach/board.h>
 #include <mach/mmc.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
 #include <mach/menelaus.h>
 #include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
-#include "../plat-omap/dsp/dsp_common.h"
-
 static struct dsp_platform_data dsp_pdata = {
 	.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
 };
@@ -76,7 +76,7 @@ int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
 {
 	static DEFINE_MUTEX(dsp_pdata_lock);
 
-	mutex_init(&kdev->lock);
+	spin_lock_init(&kdev->lock);
 
 	mutex_lock(&dsp_pdata_lock);
 	list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
@@ -95,6 +95,10 @@ static inline void omap_init_dsp(void) { }
 
 static void omap_init_kp(void)
 {
+	/* 2430 and 34xx keypad is on TWL4030 */
+	if (cpu_is_omap2430() || cpu_is_omap34xx())
+		return;
+
 	if (machine_is_omap_h2() || machine_is_omap_h3()) {
 		omap_cfg_reg(F18_1610_KBC0);
 		omap_cfg_reg(D20_1610_KBC1);
@@ -156,13 +160,6 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 {
 	int i;
 
-	if (size > OMAP_MAX_MCBSP_COUNT) {
-		printk(KERN_WARNING "Registered too many McBSPs platform_data."
-			" Using maximum (%d) available.\n",
-			OMAP_MAX_MCBSP_COUNT);
-		size = OMAP_MAX_MCBSP_COUNT;
-	}
-
 	omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
 				     GFP_KERNEL);
 	if (!omap_mcbsp_devices) {
@@ -441,16 +438,8 @@ static inline void omap_init_uwire(void) {}
 
 #if	defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
 
-#ifdef CONFIG_ARCH_OMAP24XX
-#define	OMAP_WDT_BASE		0x48022000
-#else
-#define	OMAP_WDT_BASE		0xfffeb000
-#endif
-
 static struct resource wdt_resources[] = {
 	{
-		.start		= OMAP_WDT_BASE,
-		.end		= OMAP_WDT_BASE + 0x4f,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -464,6 +453,19 @@ static struct platform_device omap_wdt_device = {
 
 static void omap_init_wdt(void)
 {
+	if (cpu_is_omap16xx())
+		wdt_resources[0].start = 0xfffeb000;
+	else if (cpu_is_omap2420())
+		wdt_resources[0].start = 0x48022000; /* WDT2 */
+	else if (cpu_is_omap2430())
+		wdt_resources[0].start = 0x49016000; /* WDT2 */
+	else if (cpu_is_omap343x())
+		wdt_resources[0].start = 0x48314000; /* WDT2 */
+	else
+		return;
+
+	wdt_resources[0].end = wdt_resources[0].start + 0x4f;
+
 	(void) platform_device_register(&omap_wdt_device);
 }
 #else
@@ -525,10 +527,6 @@ static inline void omap_init_rng(void) {}
  */
 static int __init omap_init_devices(void)
 {
-/*
- * Need to enable relevant once for 2430 SDP
- */
-#ifndef CONFIG_MACH_OMAP_2430SDP
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
@@ -538,7 +536,6 @@ static int __init omap_init_devices(void)
 	omap_init_uwire();
 	omap_init_wdt();
 	omap_init_rng();
-#endif
 	return 0;
 }
 arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index a63b644..50f8b4a 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1233,7 +1233,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
 	/* request and reserve DMA channels for the chain */
 	for (i = 0; i < no_of_chans; i++) {
 		err = omap_request_dma(dev_id, dev_name,
-					callback, 0, &channels[i]);
+					callback, NULL, &channels[i]);
 		if (err < 0) {
 			int j;
 			for (j = 0; j < i; j++)
@@ -2297,13 +2297,13 @@ static int __init omap_init_dma(void)
 	int ch, r;
 
 	if (cpu_class_is_omap1()) {
-		omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP1_DMA_BASE);
+		omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
 		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap24xx()) {
-		omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP24XX_DMA4_BASE);
+		omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap34xx()) {
-		omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP34XX_DMA4_BASE);
+		omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 743a4ab..963c31c 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -32,9 +32,9 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <mach/dmtimer.h>
-#include <asm/io.h>
 #include <mach/irqs.h>
 
 /* register offsets */
@@ -693,7 +693,7 @@ int __init omap_dm_timer_init(void)
 
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
-		timer->io_base = (void __iomem *)io_p2v(timer->phys_base);
+		timer->io_base = IO_ADDRESS(timer->phys_base);
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 		if (cpu_class_is_omap2()) {
 			char clk_name[16];
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 17a92a3..ce6b4ba 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -27,9 +27,9 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach/map.h>
 
 #include <mach/board.h>
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9e1341e..8679fbc 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -17,6 +17,7 @@
 #include <linux/sysdev.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -24,12 +25,10 @@
 #include <mach/gpio.h>
 #include <asm/mach/irq.h>
 
-#include <asm/io.h>
-
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		(void __iomem *)0xfffce000
+#define OMAP1510_GPIO_BASE		IO_ADDRESS(0xfffce000)
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -43,10 +42,10 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		(void __iomem *)0xfffbe400
-#define OMAP1610_GPIO2_BASE		(void __iomem *)0xfffbec00
-#define OMAP1610_GPIO3_BASE		(void __iomem *)0xfffbb400
-#define OMAP1610_GPIO4_BASE		(void __iomem *)0xfffbbc00
+#define OMAP1610_GPIO1_BASE		IO_ADDRESS(0xfffbe400)
+#define OMAP1610_GPIO2_BASE		IO_ADDRESS(0xfffbec00)
+#define OMAP1610_GPIO3_BASE		IO_ADDRESS(0xfffbb400)
+#define OMAP1610_GPIO4_BASE		IO_ADDRESS(0xfffbbc00)
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
@@ -68,12 +67,12 @@
 /*
  * OMAP730 specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE		(void __iomem *)0xfffbc000
-#define OMAP730_GPIO2_BASE		(void __iomem *)0xfffbc800
-#define OMAP730_GPIO3_BASE		(void __iomem *)0xfffbd000
-#define OMAP730_GPIO4_BASE		(void __iomem *)0xfffbd800
-#define OMAP730_GPIO5_BASE		(void __iomem *)0xfffbe000
-#define OMAP730_GPIO6_BASE		(void __iomem *)0xfffbe800
+#define OMAP730_GPIO1_BASE		IO_ADDRESS(0xfffbc000)
+#define OMAP730_GPIO2_BASE		IO_ADDRESS(0xfffbc800)
+#define OMAP730_GPIO3_BASE		IO_ADDRESS(0xfffbd000)
+#define OMAP730_GPIO4_BASE		IO_ADDRESS(0xfffbd800)
+#define OMAP730_GPIO5_BASE		IO_ADDRESS(0xfffbe000)
+#define OMAP730_GPIO6_BASE		IO_ADDRESS(0xfffbe800)
 #define OMAP730_GPIO_DATA_INPUT		0x00
 #define OMAP730_GPIO_DATA_OUTPUT	0x04
 #define OMAP730_GPIO_DIR_CONTROL	0x08
@@ -84,16 +83,16 @@
 /*
  * omap24xx specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE		(void __iomem *)0x48018000
-#define OMAP242X_GPIO2_BASE		(void __iomem *)0x4801a000
-#define OMAP242X_GPIO3_BASE		(void __iomem *)0x4801c000
-#define OMAP242X_GPIO4_BASE		(void __iomem *)0x4801e000
+#define OMAP242X_GPIO1_BASE		IO_ADDRESS(0x48018000)
+#define OMAP242X_GPIO2_BASE		IO_ADDRESS(0x4801a000)
+#define OMAP242X_GPIO3_BASE		IO_ADDRESS(0x4801c000)
+#define OMAP242X_GPIO4_BASE		IO_ADDRESS(0x4801e000)
 
-#define OMAP243X_GPIO1_BASE		(void __iomem *)0x4900C000
-#define OMAP243X_GPIO2_BASE		(void __iomem *)0x4900E000
-#define OMAP243X_GPIO3_BASE		(void __iomem *)0x49010000
-#define OMAP243X_GPIO4_BASE		(void __iomem *)0x49012000
-#define OMAP243X_GPIO5_BASE		(void __iomem *)0x480B6000
+#define OMAP243X_GPIO1_BASE		IO_ADDRESS(0x4900C000)
+#define OMAP243X_GPIO2_BASE		IO_ADDRESS(0x4900E000)
+#define OMAP243X_GPIO3_BASE		IO_ADDRESS(0x49010000)
+#define OMAP243X_GPIO4_BASE		IO_ADDRESS(0x49012000)
+#define OMAP243X_GPIO5_BASE		IO_ADDRESS(0x480B6000)
 
 #define OMAP24XX_GPIO_REVISION		0x0000
 #define OMAP24XX_GPIO_SYSCONFIG		0x0010
@@ -123,13 +122,14 @@
  * omap34xx specific GPIO registers
  */
 
-#define OMAP34XX_GPIO1_BASE		(void __iomem *)0x48310000
-#define OMAP34XX_GPIO2_BASE		(void __iomem *)0x49050000
-#define OMAP34XX_GPIO3_BASE		(void __iomem *)0x49052000
-#define OMAP34XX_GPIO4_BASE		(void __iomem *)0x49054000
-#define OMAP34XX_GPIO5_BASE		(void __iomem *)0x49056000
-#define OMAP34XX_GPIO6_BASE		(void __iomem *)0x49058000
+#define OMAP34XX_GPIO1_BASE		IO_ADDRESS(0x48310000)
+#define OMAP34XX_GPIO2_BASE		IO_ADDRESS(0x49050000)
+#define OMAP34XX_GPIO3_BASE		IO_ADDRESS(0x49052000)
+#define OMAP34XX_GPIO4_BASE		IO_ADDRESS(0x49054000)
+#define OMAP34XX_GPIO5_BASE		IO_ADDRESS(0x49056000)
+#define OMAP34XX_GPIO6_BASE		IO_ADDRESS(0x49058000)
 
+#define OMAP_MPUIO_VBASE		IO_ADDRESS(OMAP_MPUIO_BASE)
 
 struct gpio_bank {
 	void __iomem *base;
@@ -161,7 +161,7 @@ struct gpio_bank {
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
-	{ OMAP_MPUIO_BASE,     INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
+	{ OMAP_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
 	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
 	{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
 	{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
@@ -171,14 +171,14 @@ static struct gpio_bank gpio_bank_1610[5] = {
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
-	{ OMAP_MPUIO_BASE,    INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
+	{ OMAP_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
 	{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP730
 static struct gpio_bank gpio_bank_730[7] = {
-	{ OMAP_MPUIO_BASE,     INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP730_GPIO1_BASE,  INT_730_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_730 },
 	{ OMAP730_GPIO2_BASE,  INT_730_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_730 },
 	{ OMAP730_GPIO3_BASE,  INT_730_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_730 },
@@ -1051,13 +1051,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 		gpio_irq = bank->virtual_irq_start;
 		for (; isr != 0; isr >>= 1, gpio_irq++) {
-			struct irq_desc *d;
-
 			if (!(isr & 1))
 				continue;
-			d = irq_desc + gpio_irq;
 
-			desc_handle_irq(gpio_irq, d);
+			generic_handle_irq(gpio_irq);
 		}
 	}
 	/* if bank has any level sensitive GPIO pin interrupt
@@ -1393,7 +1390,7 @@ static int __init _omap_gpio_init(void)
 
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_1610;
-		rev = omap_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
+		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
 		printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
 		       (rev >> 4) & 0x0f, rev & 0x0f);
 	}
@@ -1412,7 +1409,7 @@ static int __init _omap_gpio_init(void)
 
 		gpio_bank_count = 4;
 		gpio_bank = gpio_bank_242x;
-		rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
 		printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
@@ -1421,7 +1418,7 @@ static int __init _omap_gpio_init(void)
 
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_243x;
-		rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
 		printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
@@ -1432,7 +1429,7 @@ static int __init _omap_gpio_init(void)
 
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_34xx;
-		rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
 		printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
@@ -1441,10 +1438,9 @@ static int __init _omap_gpio_init(void)
 		int j, gpio_count = 16;
 
 		bank = &gpio_bank[i];
-		bank->base = IO_ADDRESS(bank->base);
 		spin_lock_init(&bank->lock);
 		if (bank_is_mpuio(bank))
-			omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
+			__raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
 		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
 			__raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
 			__raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
index cf1dc02..10d449e 100644
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -30,10 +30,12 @@
 #define __ASM_ARCH_OMAP_2430SDP_H
 
 /* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START		 0x08000300
+#define OMAP24XX_ETHR_START		0x08000300
 #define OMAP24XX_ETHR_GPIO_IRQ		149
 #define SDP2430_CS0_BASE		0x04000000
 
-#define TWL4030_IRQNUM			INT_24XX_SYS_NIRQ
+/* Function prototypes */
+extern void sdp2430_flash_init(void);
+extern void sdp2430_usb_init(void);
 
 #endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index d6f2a8e..731c858 100644
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -31,6 +31,12 @@
 
 extern void apollon_mmc_init(void);
 
+static inline int apollon_plus(void)
+{
+	/* The apollon plus has IDCODE revision 5 */
+	return system_rev & 0xc0;
+}
+
 /* Placeholder for APOLLON specific defines */
 #define APOLLON_ETHR_GPIO_IRQ		74
 
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
index 1470cd3..7c3fa0f0 100644
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/plat-omap/include/mach/board-h4.h
  *
- * Hardware definitions for TI OMAP1610 H4 board.
+ * Hardware definitions for TI OMAP2420 H4 board.
  *
  * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
  *
@@ -29,6 +29,9 @@
 #ifndef __ASM_ARCH_OMAP_H4_H
 #define __ASM_ARCH_OMAP_H4_H
 
+/* MMC Prototypes */
+extern void h4_mmc_init(void);
+
 /* Placeholder for H4 specific defines */
 #define OMAP24XX_ETHR_GPIO_IRQ		92
 #endif /*  __ASM_ARCH_OMAP_H4_H */
diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
new file mode 100644
index 0000000..66e2746
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-ldp.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ldp.h
+ *
+ * Hardware definitions for TI OMAP3 LDP.
+ *
+ * Copyright (C) 2008 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_LDP_H
+#define __ASM_ARCH_OMAP_LDP_H
+
+extern void twl4030_bci_battery_init(void);
+
+#define TWL4030_IRQNUM		INT_34XX_SYS_NIRQ
+
+#endif /* __ASM_ARCH_OMAP_LDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-omap3beagle.h b/arch/arm/plat-omap/include/mach/board-omap3beagle.h
new file mode 100644
index 0000000..3080d52
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-omap3beagle.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-omap3beagle.h
+ *
+ * Hardware definitions for TI OMAP3 BEAGLE.
+ *
+ * Initial creation by Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP3_BEAGLE_H
+#define __ASM_ARCH_OMAP3_BEAGLE_H
+
+#endif /* __ASM_ARCH_OMAP3_BEAGLE_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-overo.h b/arch/arm/plat-omap/include/mach/board-overo.h
new file mode 100644
index 0000000..7ecae66
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-overo.h
@@ -0,0 +1,26 @@
+/*
+ * board-overo.h (Gumstix Overo)
+ *
+ * Initial code: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OVERO_H
+#define __ASM_ARCH_OVERO_H
+
+#define OVERO_GPIO_BT_XGATE	15
+#define OVERO_GPIO_W2W_NRESET	16
+#define OVERO_GPIO_BT_NRESET	164
+#define OVERO_GPIO_USBH_CPEN	168
+#define OVERO_GPIO_USBH_NRESET	183
+
+#endif /* ____ASM_ARCH_OVERO_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 5444564..c23c12c 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -45,6 +45,8 @@ struct omap_mmc_conf {
 	unsigned cover:1;
 	/* 4 wire signaling is optional, and is only used for SD/SDIO */
 	unsigned wire4:1;
+	/* use the internal clock */
+	unsigned internal_clock:1;
 	s16 power_pin;
 	s16 switch_pin;
 	s16 wp_pin;
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 92f7c72..7192985 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -15,6 +15,7 @@
 
 struct module;
 struct clk;
+struct clockdomain;
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
@@ -79,6 +80,8 @@ struct clk {
 	u32			clksel_mask;
 	const struct clksel	*clksel;
 	struct dpll_data	*dpll_data;
+	const char		*clkdm_name;
+	struct clockdomain	*clkdm;
 #else
 	__u8			rate_offset;
 	__u8			src_offset;
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h
new file mode 100644
index 0000000..1f51f01
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clockdomain.h
@@ -0,0 +1,106 @@
+/*
+ * linux/include/asm-arm/arch-omap/clockdomain.h
+ *
+ * OMAP2/3 clockdomain framework functions
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
+#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
+
+#include <mach/powerdomain.h>
+#include <mach/clock.h>
+#include <mach/cpu.h>
+
+/* Clockdomain capability flags */
+#define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
+#define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
+#define CLKDM_CAN_ENABLE_AUTO			(1 << 2)
+#define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
+
+#define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
+#define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
+#define CLKDM_CAN_HWSUP_SWSUP	(CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP)
+
+/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
+#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO		0x0
+#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO		0x1
+
+/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */
+#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO		0x0
+#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP		0x1
+#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP		0x2
+#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO		0x3
+
+/*
+ * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps
+ * and sleepdeps added when a powerdomain should stay active in hwsup mode;
+ * and conversely, removed when the powerdomain should be allowed to go
+ * inactive in hwsup mode.
+ */
+struct clkdm_pwrdm_autodep {
+
+	/* Name of the powerdomain to add a wkdep/sleepdep on */
+	const char *pwrdm_name;
+
+	/* Powerdomain pointer (looked up at clkdm_init() time) */
+	struct powerdomain *pwrdm;
+
+	/* OMAP chip types that this clockdomain dep is valid on */
+	const struct omap_chip_id omap_chip;
+
+};
+
+struct clockdomain {
+
+	/* Clockdomain name */
+	const char *name;
+
+	/* Powerdomain enclosing this clockdomain */
+	const char *pwrdm_name;
+
+	/* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */
+	const u16 clktrctrl_mask;
+
+	/* Clockdomain capability flags */
+	const u8 flags;
+
+	/* OMAP chip types that this clockdomain is valid on */
+	const struct omap_chip_id omap_chip;
+
+	/* Usecount tracking */
+	atomic_t usecount;
+
+	/* Powerdomain pointer assigned at clkdm_register() */
+	struct powerdomain *pwrdm;
+
+	struct list_head node;
+
+};
+
+void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps);
+int clkdm_register(struct clockdomain *clkdm);
+int clkdm_unregister(struct clockdomain *clkdm);
+struct clockdomain *clkdm_lookup(const char *name);
+
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm));
+struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
+
+void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
+void omap2_clkdm_deny_idle(struct clockdomain *clkdm);
+
+int omap2_clkdm_wakeup(struct clockdomain *clkdm);
+int omap2_clkdm_sleep(struct clockdomain *clkdm);
+
+int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
+int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0609311..ef70e2b 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -34,6 +34,7 @@ struct sys_timer;
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 extern void omap_serial_init(void);
+extern void omap_serial_enable_clocks(int enable);
 #ifdef CONFIG_I2C_OMAP
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
@@ -49,6 +50,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 
 /* IO bases for various OMAP processors */
 struct omap_globals {
+	u32		class;		/* OMAP class to detect */
 	void __iomem	*tap;		/* Control module ID code */
 	void __iomem	*sdrc;		/* SDRAM Controller */
 	void __iomem	*sms;		/* SDRAM Memory Scheduler */
@@ -62,6 +64,7 @@ void omap2_set_globals_243x(void);
 void omap2_set_globals_343x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
 void omap2_set_globals_memory(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index e3fd62d..dc988676 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,13 +1,10 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
 /*
  * arch/arm/plat-omap/include/mach/control.h
  *
  * OMAP2/3 System Control Module definitions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -16,14 +13,23 @@
  * the Free Software Foundation.
  */
 
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
 #include <mach/io.h>
 
+#ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
 
 /*
  * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
@@ -134,6 +140,7 @@
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
 
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 05aee0e..e046418 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -346,9 +346,14 @@ IS_OMAP_TYPE(3430, 0x3430)
 		get_sil_revision(system_rev)
 
 /* Various silicon macros defined here */
+#define OMAP242X_CLASS		0x24200000
 #define OMAP2420_REV_ES1_0	0x24200000
 #define OMAP2420_REV_ES2_0	0x24201000
+
+#define OMAP243X_CLASS		0x24300000
 #define OMAP2430_REV_ES1_0	0x24300000
+
+#define OMAP343X_CLASS		0x34300000
 #define OMAP3430_REV_ES1_0	0x34300000
 #define OMAP3430_REV_ES2_0	0x34301000
 #define OMAP3430_REV_ES2_1	0x34302000
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b0039b..1b11f5c 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -35,6 +35,18 @@
 #ifdef CONFIG_OMAP_LL_DEBUG_UART3
 		add	\rx, \rx, #0x00004000	@ UART 3
 #endif
+
+#elif	CONFIG_ARCH_OMAP3
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xd8000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00fb0000	@ UART 3
+		add	\rx, \rx, #0x00006000
+#endif
 #endif
 		.endm
 
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index d4e9043..030118e 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -55,9 +55,17 @@
 1510:
 		.endm
 
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 
+#if defined(CONFIG_ARCH_OMAP24XX)
 #include <mach/omap24xx.h>
+#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+#include <mach/omap34xx.h>
+#endif
+
+#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt number */
 
 		.macro	disable_fiq
 		.endm
@@ -79,7 +87,7 @@
 		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
 		cmp	\irqnr, #0x0
 2222:
-		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
+		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
 
 		.endm
 
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h
index c92e4b4..f1864a6 100644
--- a/arch/arm/plat-omap/include/mach/fpga.h
+++ b/arch/arm/plat-omap/include/mach/fpga.h
@@ -34,9 +34,9 @@ extern void omap1510_fpga_init_irq(void);
  * ---------------------------------------------------------------------------
  */
 /* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE		0xE8000000	/* VA */
-#define H2P2_DBG_FPGA_SIZE		SZ_4K		/* SIZE */
-#define H2P2_DBG_FPGA_START		0x04000000	/* PA */
+#define H2P2_DBG_FPGA_BASE		IOMEM(0xE8000000)	/* VA */
+#define H2P2_DBG_FPGA_SIZE		SZ_4K			/* SIZE */
+#define H2P2_DBG_FPGA_START		0x04000000		/* PA */
 
 #define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
 #define H2P2_DBG_FPGA_FPGA_REV		(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
@@ -85,9 +85,9 @@ struct h2p2_dbg_fpga {
  *  OMAP-1510 FPGA
  * ---------------------------------------------------------------------------
  */
-#define OMAP1510_FPGA_BASE			0xE8000000	/* Virtual */
-#define OMAP1510_FPGA_SIZE			SZ_4K
-#define OMAP1510_FPGA_START			0x08000000	/* Physical */
+#define OMAP1510_FPGA_BASE		IOMEM(0xE8000000)	/* VA */
+#define OMAP1510_FPGA_SIZE		SZ_4K
+#define OMAP1510_FPGA_START		0x08000000		/* PA */
 
 /* Revision */
 #define OMAP1510_FPGA_REV_LOW			(OMAP1510_FPGA_BASE + 0x0)
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 94ce278..98e9008 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -26,10 +26,10 @@
 #ifndef __ASM_ARCH_OMAP_GPIO_H
 #define __ASM_ARCH_OMAP_GPIO_H
 
+#include <linux/io.h>
 #include <mach/irqs.h>
-#include <asm/io.h>
 
-#define OMAP_MPUIO_BASE			(void __iomem *)0xfffb5000
+#define OMAP_MPUIO_BASE			0xfffb5000
 
 #ifdef CONFIG_ARCH_OMAP730
 #define OMAP_MPUIO_INPUT_LATCH		0x00
@@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio);
 extern void omap_set_gpio_direction(int gpio, int is_input);
 extern void omap_set_gpio_dataout(int gpio, int enable);
 extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
 
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 6a8e07f..45b6784 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -11,6 +11,9 @@
 #ifndef __OMAP2_GPMC_H
 #define __OMAP2_GPMC_H
 
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM		8
+
 #define GPMC_CS_CONFIG1		0x00
 #define GPMC_CS_CONFIG2		0x04
 #define GPMC_CS_CONFIG3		0x08
@@ -22,6 +25,9 @@
 #define GPMC_CS_NAND_ADDRESS	0x20
 #define GPMC_CS_NAND_DATA	0x24
 
+#define GPMC_CONFIG		0x50
+#define GPMC_STATUS		0x54
+
 #define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
 #define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
 #define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
@@ -78,9 +84,14 @@ struct gpmc_timings {
 	u16 access;		/* Start-cycle to first data valid delay */
 	u16 rd_cycle;		/* Total read cycle time */
 	u16 wr_cycle;		/* Total write cycle time */
+
+	/* The following are only on OMAP3430 */
+	u16 wr_access;		/* WRACCESSTIME */
+	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
 };
 
 extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
 extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
 extern unsigned long gpmc_get_fclk_period(void);
 
@@ -92,5 +103,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
+extern void gpmc_init(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 07f5d7f..6589ddb 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -89,7 +89,7 @@
 #define DPLL_CTL		(0xfffecf00)
 
 /* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE     (0xe1008000)
+#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
 #define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
 #define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
 #define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
@@ -282,8 +282,8 @@
 
 #include "omap730.h"
 #include "omap1510.h"
-#include "omap24xx.h"
 #include "omap16xx.h"
+#include "omap24xx.h"
 #include "omap34xx.h"
 
 #ifndef __ASSEMBLER__
@@ -322,6 +322,14 @@
 #include "board-2430sdp.h"
 #endif
 
+#ifdef CONFIG_MACH_OMAP3_BEAGLE
+#include "board-omap3beagle.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_LDP
+#include "board-ldp.h"
+#endif
+
 #ifdef CONFIG_MACH_OMAP_APOLLON
 #include "board-apollon.h"
 #endif
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 2a30b7d..adc83b7 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -55,14 +55,13 @@
 
 #if defined(CONFIG_ARCH_OMAP1)
 
-#define IO_PHYS		0xFFFB0000
-#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
-#define IO_SIZE		0x40000
-#define IO_VIRT		(IO_PHYS - IO_OFFSET)
-#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define io_p2v(pa)	((pa) - IO_OFFSET)
-#define io_v2p(va)	((va) + IO_OFFSET)
+#define IO_PHYS			0xFFFB0000
+#define IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
+#define IO_SIZE			0x40000
+#define IO_VIRT			(IO_PHYS - IO_OFFSET)
+#define __IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define __OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define io_v2p(va)		((va) + IO_OFFSET)
 
 #elif defined(CONFIG_ARCH_OMAP2)
 
@@ -74,7 +73,6 @@
 #define L4_24XX_VIRT	0xd8000000
 #define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
 
-#ifdef CONFIG_ARCH_OMAP2430
 #define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
 #define L4_WK_243X_VIRT		0xd9000000
 #define L4_WK_243X_SIZE		SZ_1M
@@ -88,13 +86,10 @@
 #define OMAP243X_SMS_VIRT	0xFC000000
 #define OMAP243X_SMS_SIZE	SZ_1M
 
-#endif
-
-#define IO_OFFSET	0x90000000
-#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
+#define IO_OFFSET		0x90000000
+#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)	/* Works for L3 and L4 */
 
 /* DSP */
 #define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
@@ -149,9 +144,8 @@
 
 
 #define IO_OFFSET		0x90000000
-#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
 #define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
 
 /* DSP */
@@ -167,7 +161,14 @@
 
 #endif
 
-#ifndef __ASSEMBLER__
+#define IO_ADDRESS(pa)		IOMEM(__IO_ADDRESS(pa))
+#define OMAP1_IO_ADDRESS(pa)	IOMEM(__OMAP1_IO_ADDRESS(pa))
+#define OMAP2_IO_ADDRESS(pa)	IOMEM(__OMAP2_IO_ADDRESS(pa))
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		x
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
 
 /*
  * Functions to access the OMAP IO region
@@ -178,13 +179,13 @@
  *	 - DO NOT use hardcoded virtual addresses to allow changing the
  *	   IO address space again if needed
  */
-#define omap_readb(a)		(*(volatile unsigned char  *)IO_ADDRESS(a))
-#define omap_readw(a)		(*(volatile unsigned short *)IO_ADDRESS(a))
-#define omap_readl(a)		(*(volatile unsigned int   *)IO_ADDRESS(a))
+#define omap_readb(a)		__raw_readb(IO_ADDRESS(a))
+#define omap_readw(a)		__raw_readw(IO_ADDRESS(a))
+#define omap_readl(a)		__raw_readl(IO_ADDRESS(a))
 
-#define omap_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
-#define omap_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define omap_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
+#define omap_writeb(v,a)	__raw_writeb(v, IO_ADDRESS(a))
+#define omap_writew(v,a)	__raw_writew(v, IO_ADDRESS(a))
+#define omap_writel(v,a)	__raw_writel(v, IO_ADDRESS(a))
 
 extern void omap1_map_common_io(void);
 extern void omap1_init_common_hw(void);
@@ -192,6 +193,12 @@ extern void omap1_init_common_hw(void);
 extern void omap2_map_common_io(void);
 extern void omap2_init_common_hw(void);
 
+#define __arch_ioremap(p,s,t)	omap_ioremap(p,s,t)
+#define __arch_iounmap(v)	omap_iounmap(v)
+
+void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
+void omap_iounmap(volatile void __iomem *addr);
+
 #endif
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 17248bb..a2929ac 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -125,6 +125,7 @@
 #define INT_UART2		(15 + IH2_BASE)
 #define INT_BT_MCSI1TX		(16 + IH2_BASE)
 #define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_SOSSI_MATCH		(19 + IH2_BASE)
 #define INT_USB_W2FC		(20 + IH2_BASE)
 #define INT_1WIRE		(21 + IH2_BASE)
 #define INT_OS_TIMER		(22 + IH2_BASE)
@@ -176,6 +177,7 @@
 #define INT_1610_DMA_CH14	(61 + IH2_BASE)
 #define INT_1610_DMA_CH15	(62 + IH2_BASE)
 #define INT_1610_NAND		(63 + IH2_BASE)
+#define INT_1610_SHA1MD5	(91 + IH2_BASE)
 
 /*
  * OMAP-730 specific IRQ numbers for interrupt handler 2
@@ -263,12 +265,18 @@
 #define INT_24XX_GPTIMER10	46
 #define INT_24XX_GPTIMER11	47
 #define INT_24XX_GPTIMER12	48
+#define INT_24XX_SHA1MD5	51
+#define INT_24XX_MCBSP4_IRQ_TX	54
+#define INT_24XX_MCBSP4_IRQ_RX	55
 #define INT_24XX_I2C1_IRQ	56
 #define INT_24XX_I2C2_IRQ	57
+#define INT_24XX_HDQ_IRQ	58
 #define INT_24XX_MCBSP1_IRQ_TX	59
 #define INT_24XX_MCBSP1_IRQ_RX	60
 #define INT_24XX_MCBSP2_IRQ_TX	62
 #define INT_24XX_MCBSP2_IRQ_RX	63
+#define INT_24XX_SPI1_IRQ	65
+#define INT_24XX_SPI2_IRQ	66
 #define INT_24XX_UART1_IRQ	72
 #define INT_24XX_UART2_IRQ	73
 #define INT_24XX_UART3_IRQ	74
@@ -278,7 +286,60 @@
 #define INT_24XX_USB_IRQ_HGEN	78
 #define INT_24XX_USB_IRQ_HSOF	79
 #define INT_24XX_USB_IRQ_OTG	80
+#define INT_24XX_MCBSP5_IRQ_TX	81
+#define INT_24XX_MCBSP5_IRQ_RX	82
 #define INT_24XX_MMC_IRQ	83
+#define INT_24XX_MMC2_IRQ	86
+#define INT_24XX_MCBSP3_IRQ_TX	89
+#define INT_24XX_MCBSP3_IRQ_RX	90
+#define INT_24XX_SPI3_IRQ	91
+
+#define INT_243X_MCBSP2_IRQ	16
+#define INT_243X_MCBSP3_IRQ	17
+#define INT_243X_MCBSP4_IRQ	18
+#define INT_243X_MCBSP5_IRQ	19
+#define INT_243X_MCBSP1_IRQ	64
+#define INT_243X_HS_USB_MC	92
+#define INT_243X_HS_USB_DMA	93
+#define INT_243X_CARKIT_IRQ	94
+
+#define INT_34XX_BENCH_MPU_EMUL	3
+#define INT_34XX_ST_MCBSP2_IRQ	4
+#define INT_34XX_ST_MCBSP3_IRQ	5
+#define INT_34XX_SSM_ABORT_IRQ	6
+#define INT_34XX_SYS_NIRQ	7
+#define INT_34XX_D2D_FW_IRQ	8
+#define INT_34XX_PRCM_MPU_IRQ	11
+#define INT_34XX_MCBSP1_IRQ	16
+#define INT_34XX_MCBSP2_IRQ	17
+#define INT_34XX_MCBSP3_IRQ	22
+#define INT_34XX_MCBSP4_IRQ	23
+#define INT_34XX_CAM_IRQ	24
+#define INT_34XX_MCBSP5_IRQ	27
+#define INT_34XX_GPIO_BANK1	29
+#define INT_34XX_GPIO_BANK2	30
+#define INT_34XX_GPIO_BANK3	31
+#define INT_34XX_GPIO_BANK4	32
+#define INT_34XX_GPIO_BANK5	33
+#define INT_34XX_GPIO_BANK6	34
+#define INT_34XX_USIM_IRQ	35
+#define INT_34XX_WDT3_IRQ	36
+#define INT_34XX_SPI4_IRQ	48
+#define INT_34XX_SHA1MD52_IRQ	49
+#define INT_34XX_FPKA_READY_IRQ	50
+#define INT_34XX_SHA1MD51_IRQ	51
+#define INT_34XX_RNG_IRQ	52
+#define INT_34XX_I2C3_IRQ	61
+#define INT_34XX_FPKA_ERROR_IRQ	64
+#define INT_34XX_PBIAS_IRQ	75
+#define INT_34XX_OHCI_IRQ	76
+#define INT_34XX_EHCI_IRQ	77
+#define INT_34XX_TLL_IRQ	78
+#define INT_34XX_PARTHASH_IRQ	79
+#define INT_34XX_MMC3_IRQ	94
+#define INT_34XX_GPT12_IRQ	95
+
+#define	INT_34XX_BENCH_MPU_EMUL	3
 
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
  * 16 MPUIO lines */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 8fdb95e..6a0d1a0 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -43,9 +43,15 @@
 
 #define OMAP24XX_MCBSP1_BASE	0x48074000
 #define OMAP24XX_MCBSP2_BASE	0x48076000
+#define OMAP2430_MCBSP3_BASE	0x4808c000
+#define OMAP2430_MCBSP4_BASE	0x4808e000
+#define OMAP2430_MCBSP5_BASE	0x48096000
 
 #define OMAP34XX_MCBSP1_BASE	0x48074000
 #define OMAP34XX_MCBSP2_BASE	0x49022000
+#define OMAP34XX_MCBSP3_BASE	0x49024000
+#define OMAP34XX_MCBSP4_BASE	0x49026000
+#define OMAP34XX_MCBSP5_BASE	0x48096000
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
 
@@ -81,9 +87,6 @@
 #define OMAP_MCBSP_REG_XCERG	0x3A
 #define OMAP_MCBSP_REG_XCERH	0x3C
 
-#define OMAP_MAX_MCBSP_COUNT	3
-#define MAX_MCBSP_CLOCKS	3
-
 #define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
 #define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
 
@@ -91,12 +94,14 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x04
 #define OMAP_MCBSP_REG_DXR2	0x08
 #define OMAP_MCBSP_REG_DXR1	0x0C
+#define OMAP_MCBSP_REG_DRR	0x00
+#define OMAP_MCBSP_REG_DXR	0x08
 #define OMAP_MCBSP_REG_SPCR2	0x10
 #define OMAP_MCBSP_REG_SPCR1	0x14
 #define OMAP_MCBSP_REG_RCR2	0x18
@@ -124,9 +129,9 @@
 #define OMAP_MCBSP_REG_RCERH	0x70
 #define OMAP_MCBSP_REG_XCERG	0x74
 #define OMAP_MCBSP_REG_XCERH	0x78
-
-#define OMAP_MAX_MCBSP_COUNT	2
-#define MAX_MCBSP_CLOCKS	2
+#define OMAP_MCBSP_REG_SYSCON	0x8C
+#define OMAP_MCBSP_REG_XCCR	0xAC
+#define OMAP_MCBSP_REG_RCCR	0xB0
 
 #define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
 #define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
@@ -137,10 +142,6 @@
 
 #endif
 
-#define OMAP_MCBSP_READ(base, reg)		__raw_readw((base) + OMAP_MCBSP_REG_##reg)
-#define OMAP_MCBSP_WRITE(base, reg, val)	__raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
-
-
 /************************** McBSP SPCR1 bit definitions ***********************/
 #define RRST			0x0001
 #define RRDY			0x0002
@@ -151,6 +152,7 @@
 #define DXENA			0x0080
 #define CLKSTP(value)		((value)<<11)	/* bits 11:12 */
 #define RJUST(value)		((value)<<13)	/* bits 13:14 */
+#define ALB			0x8000
 #define DLB			0x8000
 
 /************************** McBSP SPCR2 bit definitions ***********************/
@@ -228,6 +230,17 @@
 #define XPABLK(value)		((value)<<5)	/* Bits 5:6 */
 #define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
 
+/*********************** McBSP XCCR bit definitions *************************/
+#define DILB			0x0020
+#define XDMAEN			0x0008
+#define XDISABLE		0x0001
+
+/********************** McBSP RCCR bit definitions *************************/
+#define RDMAEN			0x0008
+#define RDISABLE		0x0001
+
+/********************** McBSP SYSCONFIG bit definitions ********************/
+#define SOFTRST			0x0002
 
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
@@ -260,6 +273,8 @@ typedef enum {
 	OMAP_MCBSP1 = 0,
 	OMAP_MCBSP2,
 	OMAP_MCBSP3,
+	OMAP_MCBSP4,
+	OMAP_MCBSP5
 } omap_mcbsp_id;
 
 typedef int __bitwise omap_mcbsp_io_type_t;
@@ -311,12 +326,10 @@ struct omap_mcbsp_spi_cfg {
 struct omap_mcbsp_ops {
 	void (*request)(unsigned int);
 	void (*free)(unsigned int);
-	int (*check)(unsigned int);
 };
 
 struct omap_mcbsp_platform_data {
 	unsigned long phys_base;
-	u32 virt_base;
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
@@ -326,7 +339,7 @@ struct omap_mcbsp_platform_data {
 struct omap_mcbsp {
 	struct device *dev;
 	unsigned long phys_base;
-	u32 io_base;
+	void __iomem *io_base;
 	u8 id;
 	u8 free;
 	omap_mcbsp_word_length rx_word_length;
@@ -354,6 +367,8 @@ struct omap_mcbsp {
 	struct omap_mcbsp_platform_data *pdata;
 	struct clk *clk;
 };
+extern struct omap_mcbsp **mcbsp_ptr;
+extern int omap_mcbsp_count;
 
 int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
@@ -378,5 +393,6 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
 /* Polled read/write functions */
 int omap_mcbsp_pollread(unsigned int id, u16 * buf);
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
+int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index a325caf..d40cac6 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,7 @@
  */
 #if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
index 5cee7e1..39b591f 100644
--- a/arch/arm/plat-omap/include/mach/mtd-xip.h
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -3,7 +3,7 @@
  *
  * Do not include this file directly. It's included from linux/mtd/xip.h
  *
- * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
+ * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
  *
  * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
  * terms of the GNU General Public License version 2.  This program is
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 614b2c1..6bbf178 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -125,20 +125,64 @@
 	.pu_pd_val	= pull_mode,				\
 },
 
-
-#define PULL_DISABLED	0
-#define PULL_ENABLED	1
-
-#define PULL_DOWN	0
-#define PULL_UP		1
+/* 24xx/34xx mux bit defines */
+#define OMAP2_PULL_ENA		(1 << 3)
+#define OMAP2_PULL_UP		(1 << 4)
+#define OMAP2_ALTELECTRICALSEL	(1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP3_INPUT_EN		(1 << 8)
+#define OMAP3_OFF_EN		(1 << 9)
+#define OMAP3_OFFOUT_EN		(1 << 10)
+#define OMAP3_OFFOUT_VAL	(1 << 11)
+#define OMAP3_OFF_PULL_EN	(1 << 12)
+#define OMAP3_OFF_PULL_UP	(1 << 13)
+#define OMAP3_WAKEUP_EN		(1 << 14)
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define	OMAP34XX_MUX_MODE0	0
+#define	OMAP34XX_MUX_MODE1	1
+#define	OMAP34XX_MUX_MODE2	2
+#define	OMAP34XX_MUX_MODE3	3
+#define	OMAP34XX_MUX_MODE4	4
+#define	OMAP34XX_MUX_MODE5	5
+#define	OMAP34XX_MUX_MODE6	6
+#define	OMAP34XX_MUX_MODE7	7
+
+/* 34xx active pin states */
+#define OMAP34XX_PIN_OUTPUT		0
+#define OMAP34XX_PIN_INPUT		OMAP3_INPUT_EN
+#define OMAP34XX_PIN_INPUT_PULLUP	(OMAP2_PULL_ENA | OMAP3_INPUT_EN \
+						| OMAP2_PULL_UP)
+#define OMAP34XX_PIN_INPUT_PULLDOWN	(OMAP2_PULL_ENA | OMAP3_INPUT_EN)
+
+/* 34xx off mode states */
+#define OMAP34XX_PIN_OFF_NONE           0
+#define OMAP34XX_PIN_OFF_OUTPUT_HIGH	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
+						| OMAP3_OFFOUT_VAL)
+#define OMAP34XX_PIN_OFF_OUTPUT_LOW	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
+#define OMAP34XX_PIN_OFF_INPUT_PULLUP	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
+						| OMAP3_OFF_PULL_UP)
+#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
+#define OMAP34XX_PIN_OFF_WAKEUPENABLE	OMAP3_WAKEUP_EN
+
+#define MUX_CFG_34XX(desc, reg_offset, mux_value) {		\
+	.name		= desc,					\
+	.debug		= 0,					\
+	.mux_reg	= reg_offset,				\
+	.mux_val	= mux_value				\
+},
 
 struct pin_config {
-	char *name;
-	unsigned char busy;
-	unsigned char debug;
+	char 			*name;
+	const unsigned int 	mux_reg;
+	unsigned char		debug;
 
-	const char *mux_reg_name;
-	const unsigned int mux_reg;
+#if	defined(CONFIG_ARCH_OMAP34XX)
+	u16			mux_val; /* Wake-up, off mode, pull, mux mode */
+#endif
+
+#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
 	const unsigned char mask_offset;
 	const unsigned char mask;
 
@@ -150,6 +194,12 @@ struct pin_config {
 	const char *pu_pd_name;
 	const unsigned int pu_pd_reg;
 	const unsigned char pu_pd_val;
+#endif
+
+#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+	const char *mux_reg_name;
+#endif
+
 };
 
 enum omap730_index {
@@ -593,6 +643,114 @@ enum omap24xx_index {
 
 };
 
+enum omap34xx_index {
+	/* 34xx I2C */
+	K21_34XX_I2C1_SCL,
+	J21_34XX_I2C1_SDA,
+	AF15_34XX_I2C2_SCL,
+	AE15_34XX_I2C2_SDA,
+	AF14_34XX_I2C3_SCL,
+	AG14_34XX_I2C3_SDA,
+	AD26_34XX_I2C4_SCL,
+	AE26_34XX_I2C4_SDA,
+
+	/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+	Y8_3430_USB1HS_PHY_CLK,
+	Y9_3430_USB1HS_PHY_STP,
+	AA14_3430_USB1HS_PHY_DIR,
+	AA11_3430_USB1HS_PHY_NXT,
+	W13_3430_USB1HS_PHY_DATA0,
+	W12_3430_USB1HS_PHY_DATA1,
+	W11_3430_USB1HS_PHY_DATA2,
+	Y11_3430_USB1HS_PHY_DATA3,
+	W9_3430_USB1HS_PHY_DATA4,
+	Y12_3430_USB1HS_PHY_DATA5,
+	W8_3430_USB1HS_PHY_DATA6,
+	Y13_3430_USB1HS_PHY_DATA7,
+
+	/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+	AA8_3430_USB2HS_PHY_CLK,
+	AA10_3430_USB2HS_PHY_STP,
+	AA9_3430_USB2HS_PHY_DIR,
+	AB11_3430_USB2HS_PHY_NXT,
+	AB10_3430_USB2HS_PHY_DATA0,
+	AB9_3430_USB2HS_PHY_DATA1,
+	W3_3430_USB2HS_PHY_DATA2,
+	T4_3430_USB2HS_PHY_DATA3,
+	T3_3430_USB2HS_PHY_DATA4,
+	R3_3430_USB2HS_PHY_DATA5,
+	R4_3430_USB2HS_PHY_DATA6,
+	T2_3430_USB2HS_PHY_DATA7,
+
+
+	/* TLL - HSUSB: 12-pin TLL Port 1*/
+	Y8_3430_USB1HS_TLL_CLK,
+	Y9_3430_USB1HS_TLL_STP,
+	AA14_3430_USB1HS_TLL_DIR,
+	AA11_3430_USB1HS_TLL_NXT,
+	W13_3430_USB1HS_TLL_DATA0,
+	W12_3430_USB1HS_TLL_DATA1,
+	W11_3430_USB1HS_TLL_DATA2,
+	Y11_3430_USB1HS_TLL_DATA3,
+	W9_3430_USB1HS_TLL_DATA4,
+	Y12_3430_USB1HS_TLL_DATA5,
+	W8_3430_USB1HS_TLL_DATA6,
+	Y13_3430_USB1HS_TLL_DATA7,
+
+	/* TLL - HSUSB: 12-pin TLL Port 2*/
+	AA8_3430_USB2HS_TLL_CLK,
+	AA10_3430_USB2HS_TLL_STP,
+	AA9_3430_USB2HS_TLL_DIR,
+	AB11_3430_USB2HS_TLL_NXT,
+	AB10_3430_USB2HS_TLL_DATA0,
+	AB9_3430_USB2HS_TLL_DATA1,
+	W3_3430_USB2HS_TLL_DATA2,
+	T4_3430_USB2HS_TLL_DATA3,
+	T3_3430_USB2HS_TLL_DATA4,
+	R3_3430_USB2HS_TLL_DATA5,
+	R4_3430_USB2HS_TLL_DATA6,
+	T2_3430_USB2HS_TLL_DATA7,
+
+	/* TLL - HSUSB: 12-pin TLL Port 3*/
+	AA6_3430_USB3HS_TLL_CLK,
+	AB3_3430_USB3HS_TLL_STP,
+	AA3_3430_USB3HS_TLL_DIR,
+	Y3_3430_USB3HS_TLL_NXT,
+	AA5_3430_USB3HS_TLL_DATA0,
+	Y4_3430_USB3HS_TLL_DATA1,
+	Y5_3430_USB3HS_TLL_DATA2,
+	W5_3430_USB3HS_TLL_DATA3,
+	AB12_3430_USB3HS_TLL_DATA4,
+	AB13_3430_USB3HS_TLL_DATA5,
+	AA13_3430_USB3HS_TLL_DATA6,
+	AA12_3430_USB3HS_TLL_DATA7,
+
+	/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+	AF10_3430_USB1FS_PHY_MM1_RXDP,
+	AG9_3430_USB1FS_PHY_MM1_RXDM,
+	W13_3430_USB1FS_PHY_MM1_RXRCV,
+	W12_3430_USB1FS_PHY_MM1_TXSE0,
+	W11_3430_USB1FS_PHY_MM1_TXDAT,
+	Y11_3430_USB1FS_PHY_MM1_TXEN_N,
+
+	/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+	AF7_3430_USB2FS_PHY_MM2_RXDP,
+	AH7_3430_USB2FS_PHY_MM2_RXDM,
+	AB10_3430_USB2FS_PHY_MM2_RXRCV,
+	AB9_3430_USB2FS_PHY_MM2_TXSE0,
+	W3_3430_USB2FS_PHY_MM2_TXDAT,
+	T4_3430_USB2FS_PHY_MM2_TXEN_N,
+
+	/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+	AH3_3430_USB3FS_PHY_MM3_RXDP,
+	AE3_3430_USB3FS_PHY_MM3_RXDM,
+	AD1_3430_USB3FS_PHY_MM3_RXRCV,
+	AE1_3430_USB3FS_PHY_MM3_TXSE0,
+	AD2_3430_USB3FS_PHY_MM3_TXDAT,
+	AC1_3430_USB3FS_PHY_MM3_TXEN_N,
+
+};
+
 struct omap_mux_cfg {
 	struct pin_config	*pins;
 	unsigned long		size;
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
index 505a38a..d240046 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -44,5 +44,7 @@
 #define OMAP1510_DSPREG_SIZE	SZ_128K
 #define OMAP1510_DSPREG_START	0xE1000000
 
+#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
+
 #endif /*  __ASM_ARCH_OMAP15XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index c6c93af..0e69b50 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -44,6 +44,11 @@
 #define OMAP16XX_DSPREG_SIZE	SZ_128K
 #define OMAP16XX_DSPREG_START	0xE1000000
 
+#define OMAP16XX_SEC_BASE	0xFFFE4000
+#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
+
 /*
  * ---------------------------------------------------------------------------
  * Interrupts
@@ -190,7 +195,7 @@
 #define WSPR_DISABLE_0         (0x0000aaaa)
 #define WSPR_DISABLE_1         (0x00005555)
 
-/* Mailbox */
+#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
 #define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
 
 #endif /*  __ASM_ARCH_OMAP16XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index bb8319d..24335d4 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -39,7 +39,6 @@
 /* interrupt controller */
 #define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
 #define OMAP24XX_IVA_INTC_BASE	0x40000000
-#define IRQ_SIR_IRQ		0x0040
 
 #define OMAP2420_CTRL_BASE	L4_24XX_BASE
 #define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
@@ -48,6 +47,7 @@
 #define OMAP2420_PRM_BASE	OMAP2420_CM_BASE
 #define OMAP2420_SDRC_BASE	(L3_24XX_BASE + 0x9000)
 #define OMAP2420_SMS_BASE	0x68008000
+#define OMAP2420_GPMC_BASE	0x6800a000
 
 #define OMAP2430_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
 #define OMAP2430_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index cae037d..ec67fb4 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -62,6 +62,7 @@
 #define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
 #define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
 #define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
 #define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
 
 /* Values from DSP must map to lower 16-bits */
@@ -305,6 +306,7 @@ struct lcd_ctrl {
 					   int screen_width,
 					   int pos_x, int pos_y, int width,
 					   int height, int color_mode);
+	int		(*set_rotate)	  (int angle);
 	int		(*setup_mem)	  (int plane, size_t size,
 					   int mem_type, unsigned long *paddr);
 	int		(*mmap)		  (struct fb_info *info,
@@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl;
 extern struct lcd_ctrl omap2_disp_ctrl;
 #endif
 
+extern void omapfb_reserve_sdram(void);
 extern void omapfb_register_panel(struct lcd_panel *panel);
 extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
 extern void omapfb_notify_clients(struct omapfb_device *fbdev,
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index d57f202..4649d30 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -16,6 +16,10 @@ struct omap_onenand_platform_data {
 	int			gpio_irq;
 	struct mtd_partition	*parts;
 	int			nr_parts;
-	int                     (*onenand_setup)(void __iomem *);
+	int                     (*onenand_setup)(void __iomem *, int freq);
 	int			dma_channel;
 };
+
+int omap2_onenand_rephase(void);
+
+#define ONENAND_MAX_PARTITIONS 8
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index bfa0932..768eb6e 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -39,11 +39,11 @@
  * Register and offset definitions to be used in PM assembler code
  * ----------------------------------------------------------------------------
  */
-#define CLKGEN_REG_ASM_BASE		io_p2v(0xfffece00)
+#define CLKGEN_REG_ASM_BASE		IO_ADDRESS(0xfffece00)
 #define ARM_IDLECT1_ASM_OFFSET		0x04
 #define ARM_IDLECT2_ASM_OFFSET		0x08
 
-#define TCMIF_ASM_BASE			io_p2v(0xfffecc00)
+#define TCMIF_ASM_BASE			IO_ADDRESS(0xfffecc00)
 #define EMIFS_CONFIG_ASM_OFFSET		0x0c
 #define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
 
@@ -135,7 +135,8 @@ extern void omap_pm_suspend(void);
 extern void omap730_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+					void __iomem *sdrc_power);
 extern void omap730_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
new file mode 100644
index 0000000..2806a9c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -0,0 +1,166 @@
+/*
+ * OMAP2/3 powerdomain control
+ *
+ * Copyright (C) 2007-8 Texas Instruments, Inc.
+ * Copyright (C) 2007-8 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN
+#define ASM_ARM_ARCH_OMAP_POWERDOMAIN
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+#include <asm/atomic.h>
+
+#include <mach/cpu.h>
+
+
+/* Powerdomain basic power states */
+#define PWRDM_POWER_OFF		0x0
+#define PWRDM_POWER_RET		0x1
+#define PWRDM_POWER_INACTIVE	0x2
+#define PWRDM_POWER_ON		0x3
+
+/* Powerdomain allowable state bitfields */
+#define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
+				 (1 << PWRDM_POWER_ON))
+
+#define PWRSTS_OFF_RET		((1 << PWRDM_POWER_OFF) | \
+				 (1 << PWRDM_POWER_RET))
+
+#define PWRSTS_OFF_RET_ON	(PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON))
+
+
+/* Powerdomain flags */
+#define PWRDM_HAS_HDWR_SAR	(1 << 0) /* hardware save-and-restore support */
+
+
+/*
+ * Number of memory banks that are power-controllable.	On OMAP3430, the
+ * maximum is 4.
+ */
+#define PWRDM_MAX_MEM_BANKS	4
+
+/*
+ * Maximum number of clockdomains that can be associated with a powerdomain.
+ * CORE powerdomain is probably the worst case.
+ */
+#define PWRDM_MAX_CLKDMS	3
+
+/* XXX A completely arbitrary number. What is reasonable here? */
+#define PWRDM_TRANSITION_BAILOUT 100000
+
+struct clockdomain;
+struct powerdomain;
+
+/* Encodes dependencies between powerdomains - statically defined */
+struct pwrdm_dep {
+
+	/* Powerdomain name */
+	const char *pwrdm_name;
+
+	/* Powerdomain pointer - resolved by the powerdomain code */
+	struct powerdomain *pwrdm;
+
+	/* Flags to mark OMAP chip restrictions, etc. */
+	const struct omap_chip_id omap_chip;
+
+};
+
+struct powerdomain {
+
+	/* Powerdomain name */
+	const char *name;
+
+	/* the address offset from CM_BASE/PRM_BASE */
+	const s16 prcm_offs;
+
+	/* Used to represent the OMAP chip types containing this pwrdm */
+	const struct omap_chip_id omap_chip;
+
+	/* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
+	const u8 dep_bit;
+
+	/* Powerdomains that can be told to wake this powerdomain up */
+	struct pwrdm_dep *wkdep_srcs;
+
+	/* Powerdomains that can be told to keep this pwrdm from inactivity */
+	struct pwrdm_dep *sleepdep_srcs;
+
+	/* Possible powerdomain power states */
+	const u8 pwrsts;
+
+	/* Possible logic power states when pwrdm in RETENTION */
+	const u8 pwrsts_logic_ret;
+
+	/* Powerdomain flags */
+	const u8 flags;
+
+	/* Number of software-controllable memory banks in this powerdomain */
+	const u8 banks;
+
+	/* Possible memory bank pwrstates when pwrdm in RETENTION */
+	const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
+
+	/* Possible memory bank pwrstates when pwrdm is ON */
+	const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
+
+	/* Clockdomains in this powerdomain */
+	struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
+
+	struct list_head node;
+
+};
+
+
+void pwrdm_init(struct powerdomain **pwrdm_list);
+
+int pwrdm_register(struct powerdomain *pwrdm);
+int pwrdm_unregister(struct powerdomain *pwrdm);
+struct powerdomain *pwrdm_lookup(const char *name);
+
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm));
+
+int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
+int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
+int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
+			 int (*fn)(struct powerdomain *pwrdm,
+				   struct clockdomain *clkdm));
+
+int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+
+int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
+
+int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
+int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
+
+int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
+int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+
+int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+
+int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
+int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
+bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
+
+int pwrdm_wait_transition(struct powerdomain *pwrdm);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 787b7ac..a98c6c3 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,6 +25,8 @@
 #define SDRC_DLLB_STATUS	0x06C
 #define SDRC_POWER		0x070
 #define SDRC_MR_0		0x084
+#define SDRC_ACTIM_CTRL_A_0	0x09c
+#define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
 
 /*
@@ -63,9 +65,9 @@
  */
 
 
-#define OMAP242X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+#define OMAP242X_SMS_REGADDR(reg)	IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)	IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)	IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index cc6bfa5..8a676a0 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -20,18 +20,24 @@
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
+#elif defined(CONFIG_ARCH_OMAP3)
+/* OMAP3 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x49020000
 #endif
 
 #define OMAP_MAX_NR_PORTS	3
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
+#define OMAP24XX_BASE_BAUD	(48000000/16)
 
-#define is_omap_port(p)	({int __ret = 0;			\
-			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
-			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
-			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
-				__ret = 1;			\
-			__ret;					\
+#define is_omap_port(pt)	({int __ret = 0;			\
+			if ((pt)->port.mapbase == OMAP_UART1_BASE ||	\
+			    (pt)->port.mapbase == OMAP_UART2_BASE ||	\
+			    (pt)->port.mapbase == OMAP_UART3_BASE)	\
+				__ret = 1;				\
+			__ret;						\
 			})
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index e093234..ab35d62 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -21,6 +21,10 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 				      u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
+extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
+				     u32 sdrc_actim_ctrla,
+				     u32 sdrc_actim_ctrlb, u32 m2);
+
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
 extern unsigned long omap1_sram_reprogram_clock_sz;
@@ -53,4 +57,10 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 						u32 mem_type);
 extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
+
+extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
+					  u32 sdrc_actim_ctrla,
+					  u32 sdrc_actim_ctrlb, u32 m2);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 06a28c7..06923f2 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -40,7 +40,7 @@ static inline void omap1_arch_reset(char mode)
 
 static inline void arch_reset(char mode)
 {
-	if (!cpu_is_omap24xx())
+	if (!cpu_class_is_omap2())
 		omap1_arch_reset(mode);
 	else
 		omap_prcm_arch_reset(mode);
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
new file mode 100644
index 0000000..af326ef
--- /dev/null
+++ b/arch/arm/plat-omap/io.c
@@ -0,0 +1,107 @@
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+
+#include <mach/omap730.h>
+#include <mach/omap1510.h>
+#include <mach/omap16xx.h>
+#include <mach/omap24xx.h>
+#include <mach/omap34xx.h>
+
+#define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
+#define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+#ifdef CONFIG_ARCH_OMAP1
+	if (cpu_class_is_omap1()) {
+		if (BETWEEN(p, IO_PHYS, IO_SIZE))
+			return XLATE(p, IO_PHYS, IO_VIRT);
+	}
+	if (cpu_is_omap730()) {
+		if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
+			return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START);
+
+		if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE))
+			return XLATE(p, OMAP730_DSPREG_BASE,
+					OMAP730_DSPREG_START);
+	}
+	if (cpu_is_omap15xx()) {
+		if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
+			return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START);
+
+		if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE))
+			return XLATE(p, OMAP1510_DSPREG_BASE,
+					OMAP1510_DSPREG_START);
+	}
+	if (cpu_is_omap16xx()) {
+		if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE))
+			return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START);
+
+		if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE))
+			return XLATE(p, OMAP16XX_DSPREG_BASE,
+					OMAP16XX_DSPREG_START);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP2
+	if (cpu_is_omap24xx()) {
+		if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
+			return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
+		if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
+			return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
+	}
+	if (cpu_is_omap2420()) {
+		if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
+			return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
+		if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
+			return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE);
+		if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
+			return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
+	}
+	if (cpu_is_omap2430()) {
+		if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
+			return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
+		if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
+			return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
+		if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
+			return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
+		if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
+			return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+	if (cpu_is_omap34xx()) {
+		if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
+			return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
+		if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
+			return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
+		if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE))
+			return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT);
+		if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
+			return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
+		if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
+			return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT);
+		if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE))
+			return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT);
+		if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE))
+			return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT);
+		if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE))
+			return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
+	}
+#endif
+
+	return __arm_ioremap(p, size, type);
+}
+EXPORT_SYMBOL(omap_ioremap);
+
+void omap_iounmap(volatile void __iomem *addr)
+{
+	unsigned long virt = (unsigned long)addr;
+
+	if (virt >= VMALLOC_START && virt < VMALLOC_END)
+		__iounmap(addr);
+}
+EXPORT_SYMBOL(omap_iounmap);
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 1d7aec1..b52ce05 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -30,7 +30,7 @@
 #include <linux/blkdev.h>
 #include <linux/err.h>
 #include <linux/delay.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/mailbox.h>
 #include "mailbox.h"
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 014d265..af33fc7 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -27,43 +27,65 @@
 #include <mach/dma.h>
 #include <mach/mcbsp.h>
 
-static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
+struct omap_mcbsp **mcbsp_ptr;
+int omap_mcbsp_count;
 
-#define omap_mcbsp_check_valid_id(id)	(mcbsp[id].pdata && \
-					mcbsp[id].pdata->ops && \
-					mcbsp[id].pdata->ops->check && \
-					(mcbsp[id].pdata->ops->check(id) == 0))
+void omap_mcbsp_write(void __iomem *io_base, u16 reg, u32 val)
+{
+	if (cpu_class_is_omap1() || cpu_is_omap2420())
+		__raw_writew((u16)val, io_base + reg);
+	else
+		__raw_writel(val, io_base + reg);
+}
+
+int omap_mcbsp_read(void __iomem *io_base, u16 reg)
+{
+	if (cpu_class_is_omap1() || cpu_is_omap2420())
+		return __raw_readw(io_base + reg);
+	else
+		return __raw_readl(io_base + reg);
+}
+
+#define OMAP_MCBSP_READ(base, reg) \
+			omap_mcbsp_read(base, OMAP_MCBSP_REG_##reg)
+#define OMAP_MCBSP_WRITE(base, reg, val) \
+			omap_mcbsp_write(base, OMAP_MCBSP_REG_##reg, val)
+
+#define omap_mcbsp_check_valid_id(id)	(id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id)		mcbsp_ptr[id];
 
 static void omap_mcbsp_dump_reg(u8 id)
 {
-	dev_dbg(mcbsp[id].dev, "**** McBSP%d regs ****\n", mcbsp[id].id);
-	dev_dbg(mcbsp[id].dev, "DRR2:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
-	dev_dbg(mcbsp[id].dev, "DRR1:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
-	dev_dbg(mcbsp[id].dev, "DXR2:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
-	dev_dbg(mcbsp[id].dev, "DXR1:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
-	dev_dbg(mcbsp[id].dev, "SPCR2: 0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
-	dev_dbg(mcbsp[id].dev, "SPCR1: 0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
-	dev_dbg(mcbsp[id].dev, "RCR2:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
-	dev_dbg(mcbsp[id].dev, "RCR1:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
-	dev_dbg(mcbsp[id].dev, "XCR2:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
-	dev_dbg(mcbsp[id].dev, "XCR1:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
-	dev_dbg(mcbsp[id].dev, "SRGR2: 0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
-	dev_dbg(mcbsp[id].dev, "SRGR1: 0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
-	dev_dbg(mcbsp[id].dev, "PCR0:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
-	dev_dbg(mcbsp[id].dev, "***********************\n");
+	struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id);
+
+	dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id);
+	dev_dbg(mcbsp->dev, "DRR2:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, DRR2));
+	dev_dbg(mcbsp->dev, "DRR1:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, DRR1));
+	dev_dbg(mcbsp->dev, "DXR2:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, DXR2));
+	dev_dbg(mcbsp->dev, "DXR1:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, DXR1));
+	dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, SPCR2));
+	dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, SPCR1));
+	dev_dbg(mcbsp->dev, "RCR2:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, RCR2));
+	dev_dbg(mcbsp->dev, "RCR1:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, RCR1));
+	dev_dbg(mcbsp->dev, "XCR2:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, XCR2));
+	dev_dbg(mcbsp->dev, "XCR1:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, XCR1));
+	dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, SRGR2));
+	dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, SRGR1));
+	dev_dbg(mcbsp->dev, "PCR0:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp->io_base, PCR0));
+	dev_dbg(mcbsp->dev, "***********************\n");
 }
 
 static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
@@ -126,16 +148,18 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
  */
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 {
-	u32 io_base;
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return;
 	}
+	mcbsp = id_to_mcbsp_ptr(id);
 
-	io_base = mcbsp[id].io_base;
-	dev_dbg(mcbsp[id].dev, "Configuring McBSP%d  io_base: 0x%8x\n",
-			mcbsp[id].id, io_base);
+	io_base = mcbsp->io_base;
+	dev_dbg(mcbsp->dev, "Configuring McBSP%d  phys_base: 0x%08lx\n",
+			mcbsp->id, mcbsp->phys_base);
 
 	/* We write the given config */
 	OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
@@ -158,23 +182,26 @@ EXPORT_SYMBOL(omap_mcbsp_config);
  */
 int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
 {
+	struct omap_mcbsp *mcbsp;
+
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return -ENODEV;
 	}
+	mcbsp = id_to_mcbsp_ptr(id);
 
-	spin_lock(&mcbsp[id].lock);
+	spin_lock(&mcbsp->lock);
 
-	if (!mcbsp[id].free) {
-		dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
-			mcbsp[id].id);
-		spin_unlock(&mcbsp[id].lock);
+	if (!mcbsp->free) {
+		dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
+			mcbsp->id);
+		spin_unlock(&mcbsp->lock);
 		return -EINVAL;
 	}
 
-	mcbsp[id].io_type = io_type;
+	mcbsp->io_type = io_type;
 
-	spin_unlock(&mcbsp[id].lock);
+	spin_unlock(&mcbsp->lock);
 
 	return 0;
 }
@@ -182,53 +209,60 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type);
 
 int omap_mcbsp_request(unsigned int id)
 {
+	struct omap_mcbsp *mcbsp;
 	int err;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return -ENODEV;
 	}
+	mcbsp = id_to_mcbsp_ptr(id);
 
-	if (mcbsp[id].pdata->ops->request)
-		mcbsp[id].pdata->ops->request(id);
+	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
+		mcbsp->pdata->ops->request(id);
 
-	clk_enable(mcbsp[id].clk);
+	clk_enable(mcbsp->clk);
 
-	spin_lock(&mcbsp[id].lock);
-	if (!mcbsp[id].free) {
-		dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
-			mcbsp[id].id);
-		spin_unlock(&mcbsp[id].lock);
+	spin_lock(&mcbsp->lock);
+	if (!mcbsp->free) {
+		dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
+			mcbsp->id);
+		spin_unlock(&mcbsp->lock);
 		return -1;
 	}
 
-	mcbsp[id].free = 0;
-	spin_unlock(&mcbsp[id].lock);
+	mcbsp->free = 0;
+	spin_unlock(&mcbsp->lock);
+
+	/*
+	 * Make sure that transmitter, receiver and sample-rate generator are
+	 * not running before activating IRQs.
+	 */
+	OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR1, 0);
+	OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR2, 0);
 
-	if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) {
+	if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
 		/* We need to get IRQs here */
-		err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler,
-					0, "McBSP", (void *) (&mcbsp[id]));
+		init_completion(&mcbsp->tx_irq_completion);
+		err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler,
+					0, "McBSP", (void *)mcbsp);
 		if (err != 0) {
-			dev_err(mcbsp[id].dev, "Unable to request TX IRQ %d "
-					"for McBSP%d\n", mcbsp[id].tx_irq,
-					mcbsp[id].id);
+			dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
+					"for McBSP%d\n", mcbsp->tx_irq,
+					mcbsp->id);
 			return err;
 		}
 
-		init_completion(&(mcbsp[id].tx_irq_completion));
-
-		err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler,
-					0, "McBSP", (void *) (&mcbsp[id]));
+		init_completion(&mcbsp->rx_irq_completion);
+		err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler,
+					0, "McBSP", (void *)mcbsp);
 		if (err != 0) {
-			dev_err(mcbsp[id].dev, "Unable to request RX IRQ %d "
-					"for McBSP%d\n", mcbsp[id].rx_irq,
-					mcbsp[id].id);
-			free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
+			dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
+					"for McBSP%d\n", mcbsp->rx_irq,
+					mcbsp->id);
+			free_irq(mcbsp->tx_irq, (void *)mcbsp);
 			return err;
 		}
-
-		init_completion(&(mcbsp[id].rx_irq_completion));
 	}
 
 	return 0;
@@ -237,31 +271,34 @@ EXPORT_SYMBOL(omap_mcbsp_request);
 
 void omap_mcbsp_free(unsigned int id)
 {
+	struct omap_mcbsp *mcbsp;
+
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return;
 	}
+	mcbsp = id_to_mcbsp_ptr(id);
 
-	if (mcbsp[id].pdata->ops->free)
-		mcbsp[id].pdata->ops->free(id);
+	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+		mcbsp->pdata->ops->free(id);
 
-	clk_disable(mcbsp[id].clk);
+	clk_disable(mcbsp->clk);
 
-	spin_lock(&mcbsp[id].lock);
-	if (mcbsp[id].free) {
-		dev_err(mcbsp[id].dev, "McBSP%d was not reserved\n",
-			mcbsp[id].id);
-		spin_unlock(&mcbsp[id].lock);
+	spin_lock(&mcbsp->lock);
+	if (mcbsp->free) {
+		dev_err(mcbsp->dev, "McBSP%d was not reserved\n",
+			mcbsp->id);
+		spin_unlock(&mcbsp->lock);
 		return;
 	}
 
-	mcbsp[id].free = 1;
-	spin_unlock(&mcbsp[id].lock);
+	mcbsp->free = 1;
+	spin_unlock(&mcbsp->lock);
 
-	if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) {
+	if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
 		/* Free IRQs */
-		free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id]));
-		free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
+		free_irq(mcbsp->rx_irq, (void *)mcbsp);
+		free_irq(mcbsp->tx_irq, (void *)mcbsp);
 	}
 }
 EXPORT_SYMBOL(omap_mcbsp_free);
@@ -273,18 +310,19 @@ EXPORT_SYMBOL(omap_mcbsp_free);
  */
 void omap_mcbsp_start(unsigned int id)
 {
-	u32 io_base;
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return;
 	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
 
-	io_base = mcbsp[id].io_base;
-
-	mcbsp[id].rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
-	mcbsp[id].tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
+	mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
+	mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
 
 	/* Start the sample generator */
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
@@ -310,7 +348,8 @@ EXPORT_SYMBOL(omap_mcbsp_start);
 
 void omap_mcbsp_stop(unsigned int id)
 {
-	u32 io_base;
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -318,7 +357,8 @@ void omap_mcbsp_stop(unsigned int id)
 		return;
 	}
 
-	io_base = mcbsp[id].io_base;
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
 
 	/* Reset transmitter */
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
@@ -337,14 +377,17 @@ EXPORT_SYMBOL(omap_mcbsp_stop);
 /* polled mcbsp i/o operations */
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 {
-	u32 base;
+	struct omap_mcbsp *mcbsp;
+	void __iomem *base;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return -ENODEV;
 	}
 
-	base = mcbsp[id].io_base;
+	mcbsp = id_to_mcbsp_ptr(id);
+	base = mcbsp->io_base;
+
 	writew(buf, base + OMAP_MCBSP_REG_DXR1);
 	/* if frame sync error - clear the error */
 	if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
@@ -366,8 +409,8 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 				       (XRST),
 				       base + OMAP_MCBSP_REG_SPCR2);
 				udelay(10);
-				dev_err(mcbsp[id].dev, "Could not write to"
-					" McBSP%d Register\n", mcbsp[id].id);
+				dev_err(mcbsp->dev, "Could not write to"
+					" McBSP%d Register\n", mcbsp->id);
 				return -2;
 			}
 		}
@@ -379,14 +422,16 @@ EXPORT_SYMBOL(omap_mcbsp_pollwrite);
 
 int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 {
-	u32 base;
+	struct omap_mcbsp *mcbsp;
+	void __iomem *base;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return -ENODEV;
 	}
+	mcbsp = id_to_mcbsp_ptr(id);
 
-	base = mcbsp[id].io_base;
+	base = mcbsp->io_base;
 	/* if frame sync error - clear the error */
 	if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
 		/* clear error */
@@ -407,8 +452,8 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 				       (RRST),
 				       base + OMAP_MCBSP_REG_SPCR1);
 				udelay(10);
-				dev_err(mcbsp[id].dev, "Could not read from"
-					" McBSP%d Register\n", mcbsp[id].id);
+				dev_err(mcbsp->dev, "Could not read from"
+					" McBSP%d Register\n", mcbsp->id);
 				return -2;
 			}
 		}
@@ -424,7 +469,8 @@ EXPORT_SYMBOL(omap_mcbsp_pollread);
  */
 void omap_mcbsp_xmit_word(unsigned int id, u32 word)
 {
-	u32 io_base;
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
 	omap_mcbsp_word_length word_length;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -432,10 +478,11 @@ void omap_mcbsp_xmit_word(unsigned int id, u32 word)
 		return;
 	}
 
-	io_base = mcbsp[id].io_base;
-	word_length = mcbsp[id].tx_word_length;
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+	word_length = mcbsp->tx_word_length;
 
-	wait_for_completion(&(mcbsp[id].tx_irq_completion));
+	wait_for_completion(&mcbsp->tx_irq_completion);
 
 	if (word_length > OMAP_MCBSP_WORD_16)
 		OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
@@ -445,7 +492,8 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_word);
 
 u32 omap_mcbsp_recv_word(unsigned int id)
 {
-	u32 io_base;
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
 	u16 word_lsb, word_msb = 0;
 	omap_mcbsp_word_length word_length;
 
@@ -453,11 +501,12 @@ u32 omap_mcbsp_recv_word(unsigned int id)
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return -ENODEV;
 	}
+	mcbsp = id_to_mcbsp_ptr(id);
 
-	word_length = mcbsp[id].rx_word_length;
-	io_base = mcbsp[id].io_base;
+	word_length = mcbsp->rx_word_length;
+	io_base = mcbsp->io_base;
 
-	wait_for_completion(&(mcbsp[id].rx_irq_completion));
+	wait_for_completion(&mcbsp->rx_irq_completion);
 
 	if (word_length > OMAP_MCBSP_WORD_16)
 		word_msb = OMAP_MCBSP_READ(io_base, DRR2);
@@ -469,7 +518,8 @@ EXPORT_SYMBOL(omap_mcbsp_recv_word);
 
 int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 {
-	u32 io_base;
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
 	omap_mcbsp_word_length tx_word_length;
 	omap_mcbsp_word_length rx_word_length;
 	u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
@@ -478,10 +528,10 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return -ENODEV;
 	}
-
-	io_base = mcbsp[id].io_base;
-	tx_word_length = mcbsp[id].tx_word_length;
-	rx_word_length = mcbsp[id].rx_word_length;
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+	tx_word_length = mcbsp->tx_word_length;
+	rx_word_length = mcbsp->rx_word_length;
 
 	if (tx_word_length != rx_word_length)
 		return -EINVAL;
@@ -496,8 +546,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 			udelay(10);
 			OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
 			udelay(10);
-			dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
-				"ready\n", mcbsp[id].id);
+			dev_err(mcbsp->dev, "McBSP%d transmitter not "
+				"ready\n", mcbsp->id);
 			return -EAGAIN;
 		}
 	}
@@ -517,8 +567,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 			udelay(10);
 			OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
 			udelay(10);
-			dev_err(mcbsp[id].dev, "McBSP%d receiver not "
-				"ready\n", mcbsp[id].id);
+			dev_err(mcbsp->dev, "McBSP%d receiver not "
+				"ready\n", mcbsp->id);
 			return -EAGAIN;
 		}
 	}
@@ -534,7 +584,9 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
 
 int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 {
-	u32 io_base, clock_word = 0;
+	struct omap_mcbsp *mcbsp;
+	u32 clock_word = 0;
+	void __iomem *io_base;
 	omap_mcbsp_word_length tx_word_length;
 	omap_mcbsp_word_length rx_word_length;
 	u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
@@ -544,9 +596,11 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 		return -ENODEV;
 	}
 
-	io_base = mcbsp[id].io_base;
-	tx_word_length = mcbsp[id].tx_word_length;
-	rx_word_length = mcbsp[id].rx_word_length;
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	tx_word_length = mcbsp->tx_word_length;
+	rx_word_length = mcbsp->rx_word_length;
 
 	if (tx_word_length != rx_word_length)
 		return -EINVAL;
@@ -561,8 +615,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 			udelay(10);
 			OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
 			udelay(10);
-			dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
-				"ready\n", mcbsp[id].id);
+			dev_err(mcbsp->dev, "McBSP%d transmitter not "
+				"ready\n", mcbsp->id);
 			return -EAGAIN;
 		}
 	}
@@ -582,8 +636,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 			udelay(10);
 			OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
 			udelay(10);
-			dev_err(mcbsp[id].dev, "McBSP%d receiver not "
-				"ready\n", mcbsp[id].id);
+			dev_err(mcbsp->dev, "McBSP%d receiver not "
+				"ready\n", mcbsp->id);
 			return -EAGAIN;
 		}
 	}
@@ -609,6 +663,7 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
 int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
 				unsigned int length)
 {
+	struct omap_mcbsp *mcbsp;
 	int dma_tx_ch;
 	int src_port = 0;
 	int dest_port = 0;
@@ -618,50 +673,51 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return -ENODEV;
 	}
+	mcbsp = id_to_mcbsp_ptr(id);
 
-	if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX",
+	if (omap_request_dma(mcbsp->dma_tx_sync, "McBSP TX",
 				omap_mcbsp_tx_dma_callback,
-				&mcbsp[id],
+				mcbsp,
 				&dma_tx_ch)) {
-		dev_err(mcbsp[id].dev, " Unable to request DMA channel for "
+		dev_err(mcbsp->dev, " Unable to request DMA channel for "
 				"McBSP%d TX. Trying IRQ based TX\n",
-				mcbsp[id].id);
+				mcbsp->id);
 		return -EAGAIN;
 	}
-	mcbsp[id].dma_tx_lch = dma_tx_ch;
+	mcbsp->dma_tx_lch = dma_tx_ch;
 
-	dev_err(mcbsp[id].dev, "McBSP%d TX DMA on channel %d\n", mcbsp[id].id,
+	dev_err(mcbsp->dev, "McBSP%d TX DMA on channel %d\n", mcbsp->id,
 		dma_tx_ch);
 
-	init_completion(&(mcbsp[id].tx_dma_completion));
+	init_completion(&mcbsp->tx_dma_completion);
 
 	if (cpu_class_is_omap1()) {
 		src_port = OMAP_DMA_PORT_TIPB;
 		dest_port = OMAP_DMA_PORT_EMIFF;
 	}
 	if (cpu_class_is_omap2())
-		sync_dev = mcbsp[id].dma_tx_sync;
+		sync_dev = mcbsp->dma_tx_sync;
 
-	omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
+	omap_set_dma_transfer_params(mcbsp->dma_tx_lch,
 				     OMAP_DMA_DATA_TYPE_S16,
 				     length >> 1, 1,
 				     OMAP_DMA_SYNC_ELEMENT,
 	 sync_dev, 0);
 
-	omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
+	omap_set_dma_dest_params(mcbsp->dma_tx_lch,
 				 src_port,
 				 OMAP_DMA_AMODE_CONSTANT,
-				 mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1,
+				 mcbsp->phys_base + OMAP_MCBSP_REG_DXR1,
 				 0, 0);
 
-	omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
+	omap_set_dma_src_params(mcbsp->dma_tx_lch,
 				dest_port,
 				OMAP_DMA_AMODE_POST_INC,
 				buffer,
 				0, 0);
 
-	omap_start_dma(mcbsp[id].dma_tx_lch);
-	wait_for_completion(&(mcbsp[id].tx_dma_completion));
+	omap_start_dma(mcbsp->dma_tx_lch);
+	wait_for_completion(&mcbsp->tx_dma_completion);
 
 	return 0;
 }
@@ -670,6 +726,7 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
 int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
 				unsigned int length)
 {
+	struct omap_mcbsp *mcbsp;
 	int dma_rx_ch;
 	int src_port = 0;
 	int dest_port = 0;
@@ -679,50 +736,51 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return -ENODEV;
 	}
+	mcbsp = id_to_mcbsp_ptr(id);
 
-	if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX",
+	if (omap_request_dma(mcbsp->dma_rx_sync, "McBSP RX",
 				omap_mcbsp_rx_dma_callback,
-				&mcbsp[id],
+				mcbsp,
 				&dma_rx_ch)) {
-		dev_err(mcbsp[id].dev, "Unable to request DMA channel for "
+		dev_err(mcbsp->dev, "Unable to request DMA channel for "
 				"McBSP%d RX. Trying IRQ based RX\n",
-				mcbsp[id].id);
+				mcbsp->id);
 		return -EAGAIN;
 	}
-	mcbsp[id].dma_rx_lch = dma_rx_ch;
+	mcbsp->dma_rx_lch = dma_rx_ch;
 
-	dev_err(mcbsp[id].dev, "McBSP%d RX DMA on channel %d\n", mcbsp[id].id,
+	dev_err(mcbsp->dev, "McBSP%d RX DMA on channel %d\n", mcbsp->id,
 		dma_rx_ch);
 
-	init_completion(&(mcbsp[id].rx_dma_completion));
+	init_completion(&mcbsp->rx_dma_completion);
 
 	if (cpu_class_is_omap1()) {
 		src_port = OMAP_DMA_PORT_TIPB;
 		dest_port = OMAP_DMA_PORT_EMIFF;
 	}
 	if (cpu_class_is_omap2())
-		sync_dev = mcbsp[id].dma_rx_sync;
+		sync_dev = mcbsp->dma_rx_sync;
 
-	omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
+	omap_set_dma_transfer_params(mcbsp->dma_rx_lch,
 					OMAP_DMA_DATA_TYPE_S16,
 					length >> 1, 1,
 					OMAP_DMA_SYNC_ELEMENT,
 					sync_dev, 0);
 
-	omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
+	omap_set_dma_src_params(mcbsp->dma_rx_lch,
 				src_port,
 				OMAP_DMA_AMODE_CONSTANT,
-				mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1,
+				mcbsp->phys_base + OMAP_MCBSP_REG_DRR1,
 				0, 0);
 
-	omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
+	omap_set_dma_dest_params(mcbsp->dma_rx_lch,
 					dest_port,
 					OMAP_DMA_AMODE_POST_INC,
 					buffer,
 					0, 0);
 
-	omap_start_dma(mcbsp[id].dma_rx_lch);
-	wait_for_completion(&(mcbsp[id].rx_dma_completion));
+	omap_start_dma(mcbsp->dma_rx_lch);
+	wait_for_completion(&mcbsp->rx_dma_completion);
 
 	return 0;
 }
@@ -737,12 +795,14 @@ EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
 void omap_mcbsp_set_spi_mode(unsigned int id,
 				const struct omap_mcbsp_spi_cfg *spi_cfg)
 {
+	struct omap_mcbsp *mcbsp;
 	struct omap_mcbsp_reg_cfg mcbsp_cfg;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return;
 	}
+	mcbsp = id_to_mcbsp_ptr(id);
 
 	memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
 
@@ -803,9 +863,10 @@ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
  * 730 has only 2 McBSP, and both of them are MPU peripherals.
  */
-static int __init omap_mcbsp_probe(struct platform_device *pdev)
+static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 {
 	struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
+	struct omap_mcbsp *mcbsp;
 	int id = pdev->id - 1;
 	int ret = 0;
 
@@ -818,47 +879,63 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id);
 
-	if (id >= OMAP_MAX_MCBSP_COUNT) {
+	if (id >= omap_mcbsp_count) {
 		dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id);
 		ret = -EINVAL;
 		goto exit;
 	}
 
-	spin_lock_init(&mcbsp[id].lock);
-	mcbsp[id].id = id + 1;
-	mcbsp[id].free = 1;
-	mcbsp[id].dma_tx_lch = -1;
-	mcbsp[id].dma_rx_lch = -1;
+	mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL);
+	if (!mcbsp) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+	mcbsp_ptr[id] = mcbsp;
+
+	spin_lock_init(&mcbsp->lock);
+	mcbsp->id = id + 1;
+	mcbsp->free = 1;
+	mcbsp->dma_tx_lch = -1;
+	mcbsp->dma_rx_lch = -1;
+
+	mcbsp->phys_base = pdata->phys_base;
+	mcbsp->io_base = ioremap(pdata->phys_base, SZ_4K);
+	if (!mcbsp->io_base) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
 
-	mcbsp[id].phys_base = pdata->phys_base;
-	mcbsp[id].io_base = pdata->virt_base;
 	/* Default I/O is IRQ based */
-	mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
-	mcbsp[id].tx_irq = pdata->tx_irq;
-	mcbsp[id].rx_irq = pdata->rx_irq;
-	mcbsp[id].dma_rx_sync = pdata->dma_rx_sync;
-	mcbsp[id].dma_tx_sync = pdata->dma_tx_sync;
+	mcbsp->io_type = OMAP_MCBSP_IRQ_IO;
+	mcbsp->tx_irq = pdata->tx_irq;
+	mcbsp->rx_irq = pdata->rx_irq;
+	mcbsp->dma_rx_sync = pdata->dma_rx_sync;
+	mcbsp->dma_tx_sync = pdata->dma_tx_sync;
 
 	if (pdata->clk_name)
-		mcbsp[id].clk = clk_get(&pdev->dev, pdata->clk_name);
-	if (IS_ERR(mcbsp[id].clk)) {
-		mcbsp[id].free = 0;
+		mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name);
+	if (IS_ERR(mcbsp->clk)) {
 		dev_err(&pdev->dev,
 			"Invalid clock configuration for McBSP%d.\n",
-			mcbsp[id].id);
-		ret = -EINVAL;
-		goto exit;
+			mcbsp->id);
+		ret = PTR_ERR(mcbsp->clk);
+		goto err_clk;
 	}
 
-	mcbsp[id].pdata = pdata;
-	mcbsp[id].dev = &pdev->dev;
-	platform_set_drvdata(pdev, &mcbsp[id]);
+	mcbsp->pdata = pdata;
+	mcbsp->dev = &pdev->dev;
+	platform_set_drvdata(pdev, mcbsp);
+	return 0;
 
+err_clk:
+	iounmap(mcbsp->io_base);
+err_ioremap:
+	mcbsp->free = 0;
 exit:
 	return ret;
 }
 
-static int omap_mcbsp_remove(struct platform_device *pdev)
+static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 {
 	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
 
@@ -872,6 +949,8 @@ static int omap_mcbsp_remove(struct platform_device *pdev)
 		clk_disable(mcbsp->clk);
 		clk_put(mcbsp->clk);
 
+		iounmap(mcbsp->io_base);
+
 		mcbsp->clk = NULL;
 		mcbsp->free = 0;
 		mcbsp->dev = NULL;
@@ -882,7 +961,7 @@ static int omap_mcbsp_remove(struct platform_device *pdev)
 
 static struct platform_driver omap_mcbsp_driver = {
 	.probe		= omap_mcbsp_probe,
-	.remove		= omap_mcbsp_remove,
+	.remove		= __devexit_p(omap_mcbsp_remove),
 	.driver		= {
 		.name	= "omap-mcbsp",
 	},
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 847df20..80b040f 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -25,8 +25,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/io.h>
 #include <asm/system.h>
-#include <asm/io.h>
 #include <linux/spinlock.h>
 #include <mach/mux.h>
 
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index 8bdbf97..ebe0c73 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -31,8 +31,8 @@
 #include <linux/spinlock.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/hardware.h>
 
 #define OCPI_BASE		0xfffec320
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index ac67eeb..9f9a921 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -15,9 +15,9 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <asm/tlb.h>
-#include <asm/io.h>
 #include <asm/cacheflush.h>
 
 #include <asm/mach/map.h>
@@ -271,7 +271,7 @@ int __init omap1_sram_init(void)
 #define omap1_sram_init()	do {} while (0)
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2)
 
 static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 			      u32 base_cs, u32 force_unlock);
@@ -352,23 +352,19 @@ static inline int omap243x_sram_init(void)
 
 #ifdef CONFIG_ARCH_OMAP3
 
-static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
-u32 omap2_sram_reprogram_gpmc(u32 perf_level)
-{
-	if (!_omap2_sram_reprogram_gpmc)
-		omap_sram_error();
-
-	return _omap2_sram_reprogram_gpmc(perf_level);
-}
-
-static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
-						u32 freqsel, u32 m2);
-u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
+static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
+					      u32 sdrc_actim_ctrla,
+					      u32 sdrc_actim_ctrlb,
+					      u32 m2);
+u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
+			      u32 sdrc_actim_ctrlb, u32 m2)
 {
-	if (!_omap2_sram_configure_core_dpll)
+	if (!_omap3_sram_configure_core_dpll)
 		omap_sram_error();
 
-	return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
+	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
+					       sdrc_actim_ctrla,
+					       sdrc_actim_ctrlb, m2);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -376,31 +372,16 @@ void restore_sram_functions(void)
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 
-	_omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
-		omap34xx_sram_reprogram_gpmc_sz);
-
-	_omap2_sram_configure_core_dpll =
-			omap_sram_push(omap34xx_sram_configure_core_dpll,
-					omap34xx_sram_configure_core_dpll_sz);
+	_omap3_sram_configure_core_dpll =
+		omap_sram_push(omap3_sram_configure_core_dpll,
+			       omap3_sram_configure_core_dpll_sz);
 }
 
 int __init omap34xx_sram_init(void)
 {
-	_omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
-					omap34xx_sram_ddr_init_sz);
-
-	_omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
-					omap34xx_sram_reprogram_sdrc_sz);
-
-	_omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
-					omap34xx_sram_set_prcm_sz);
-
-	_omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
-					omap34xx_sram_reprogram_gpmc_sz);
-
-	_omap2_sram_configure_core_dpll =
-				omap_sram_push(omap34xx_sram_configure_core_dpll,
-					omap34xx_sram_configure_core_dpll_sz);
+	_omap3_sram_configure_core_dpll =
+		omap_sram_push(omap3_sram_configure_core_dpll,
+			       omap3_sram_configure_core_dpll_sz);
 
 	return 0;
 }
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 777485e..67ca1e2 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -27,8 +27,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/usb/otg.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
new file mode 100644
index 0000000..f03d7b3
--- /dev/null
+++ b/arch/arm/plat-s3c/Makefile
@@ -0,0 +1,3 @@
+# dummy makefile, currently just including asm/arm/plat-s3c/include/plat
+
+obj-n	:= dummy.o
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S
new file mode 100644
index 0000000..4aa7e2e
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/debug-macro.S
@@ -0,0 +1,75 @@
+/* linux/include/asm-arm/plat-s3c/debug-macro.S
+ *
+ * Copyright 2005, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-serial.h>
+
+/* The S3C2440 implementations are used by default as they are the
+ * most widely re-used */
+
+	.macro fifo_level_s3c2440 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
+	.endm
+
+#ifndef fifo_level
+#define fifo_level fifo_level_s3c2410
+#endif
+
+	.macro  fifo_full_s3c2440 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		tst	\rd, #S3C2440_UFSTAT_TXFULL
+	.endm
+
+#ifndef fifo_full
+#define fifo_full fifo_full_s3c2440
+#endif
+
+	.macro	senduart,rd,rx
+		strb 	\rd, [\rx, # S3C2410_UTXH ]
+	.endm
+
+	.macro	busyuart, rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		fifo_full \rd, \rx
+		bne	1003b
+		b	1002f
+
+1001:
+		@ busy waiting for non fifo
+		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+	.endm
+
+	.macro	waituart,rd,rx
+		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		fifo_level \rd, \rx
+		teq	\rd, #0
+		bne	1003b
+		b	1002f
+1001:
+		@ idle waiting for non fifo
+		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+	.endm
diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map.h
new file mode 100644
index 0000000..b84289d
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/map.h
@@ -0,0 +1,40 @@
+/* linux/include/asm-arm/plat-s3c/map.h
+ *
+ * Copyright 2003, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - Memory map definitions (virtual addresses)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_H
+#define __ASM_PLAT_MAP_H __FILE__
+
+/* Fit all our registers in at 0xF4000000 upwards, trying to use as
+ * little of the VA space as possible so vmalloc and friends have a
+ * better chance of getting memory.
+ *
+ * we try to ensure stuff like the IRQ registers are available for
+ * an single MOVS instruction (ie, only 8 bits of set data)
+ */
+
+#define S3C_ADDR_BASE	(0xF4000000)
+
+#ifndef __ASSEMBLY__
+#define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
+#else
+#define S3C_ADDR(x)	(S3C_ADDR_BASE + (x))
+#endif
+
+#define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
+#define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
+#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* system control */
+#define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
+#define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
+#define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
+
+#endif /* __ASM_PLAT_MAP_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-s3c/include/plat/regs-adc.h
new file mode 100644
index 0000000..4323ccc
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-adc.h
@@ -0,0 +1,60 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
+ *
+ * Copyright (c) 2004 Shannon Holland <holland@loser.net>
+ *
+ * This program is free software; yosu can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 ADC registers
+*/
+
+#ifndef __ASM_ARCH_REGS_ADC_H
+#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
+
+#define S3C2410_ADCREG(x) (x)
+
+#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
+#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
+#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
+#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
+#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
+
+
+/* ADCCON Register Bits */
+#define S3C2410_ADCCON_ECFLG		(1<<15)
+#define S3C2410_ADCCON_PRSCEN		(1<<14)
+#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
+#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
+#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
+#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
+#define S3C2410_ADCCON_STDBM		(1<<2)
+#define S3C2410_ADCCON_READ_START	(1<<1)
+#define S3C2410_ADCCON_ENABLE_START	(1<<0)
+#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
+
+
+/* ADCTSC Register Bits */
+#define S3C2410_ADCTSC_YM_SEN		(1<<7)
+#define S3C2410_ADCTSC_YP_SEN		(1<<6)
+#define S3C2410_ADCTSC_XM_SEN		(1<<5)
+#define S3C2410_ADCTSC_XP_SEN		(1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
+#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
+#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
+
+#endif /* __ASM_ARCH_REGS_ADC_H */
+
+
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
new file mode 100644
index 0000000..a0daa64
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -0,0 +1,232 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
+ *
+ *  From linux/include/asm-arm/hardware/serial_s3c2410.h
+ *
+ *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
+ *
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ *  Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ *
+ *  Adapted from:
+ *
+ *  Internal header file for MX1ADS serial ports (UART1 & 2)
+ *
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define S3C24XX_VA_UART0      (S3C_VA_UART)
+#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
+#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
+#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
+
+#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
+#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
+#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
+
+#define S3C2410_URXH	  (0x24)
+#define S3C2410_UTXH	  (0x20)
+#define S3C2410_ULCON	  (0x00)
+#define S3C2410_UCON	  (0x04)
+#define S3C2410_UFCON	  (0x08)
+#define S3C2410_UMCON	  (0x0C)
+#define S3C2410_UBRDIV	  (0x28)
+#define S3C2410_UTRSTAT	  (0x10)
+#define S3C2410_UERSTAT	  (0x14)
+#define S3C2410_UFSTAT	  (0x18)
+#define S3C2410_UMSTAT	  (0x1C)
+
+#define S3C2410_LCON_CFGMASK	  ((0xF<<3)|(0x3))
+
+#define S3C2410_LCON_CS5	  (0x0)
+#define S3C2410_LCON_CS6	  (0x1)
+#define S3C2410_LCON_CS7	  (0x2)
+#define S3C2410_LCON_CS8	  (0x3)
+#define S3C2410_LCON_CSMASK	  (0x3)
+
+#define S3C2410_LCON_PNONE	  (0x0)
+#define S3C2410_LCON_PEVEN	  (0x5 << 3)
+#define S3C2410_LCON_PODD	  (0x4 << 3)
+#define S3C2410_LCON_PMASK	  (0x7 << 3)
+
+#define S3C2410_LCON_STOPB	  (1<<2)
+#define S3C2410_LCON_IRM          (1<<6)
+
+#define S3C2440_UCON_CLKMASK	  (3<<10)
+#define S3C2440_UCON_PCLK	  (0<<10)
+#define S3C2440_UCON_UCLK	  (1<<10)
+#define S3C2440_UCON_PCLK2	  (2<<10)
+#define S3C2440_UCON_FCLK	  (3<<10)
+#define S3C2443_UCON_EPLL	  (3<<10)
+
+#define S3C2440_UCON2_FCLK_EN	  (1<<15)
+#define S3C2440_UCON0_DIVMASK	  (15 << 12)
+#define S3C2440_UCON1_DIVMASK	  (15 << 12)
+#define S3C2440_UCON2_DIVMASK	  (7 << 12)
+#define S3C2440_UCON_DIVSHIFT	  (12)
+
+#define S3C2412_UCON_CLKMASK	(3<<10)
+#define S3C2412_UCON_UCLK	(1<<10)
+#define S3C2412_UCON_USYSCLK	(3<<10)
+#define S3C2412_UCON_PCLK	(0<<10)
+#define S3C2412_UCON_PCLK2	(2<<10)
+
+#define S3C2410_UCON_UCLK	  (1<<10)
+#define S3C2410_UCON_SBREAK	  (1<<4)
+
+#define S3C2410_UCON_TXILEVEL	  (1<<9)
+#define S3C2410_UCON_RXILEVEL	  (1<<8)
+#define S3C2410_UCON_TXIRQMODE	  (1<<2)
+#define S3C2410_UCON_RXIRQMODE	  (1<<0)
+#define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
+#define S3C2443_UCON_RXERR_IRQEN  (1<<6)
+#define S3C2443_UCON_LOOPBACK	  (1<<5)
+
+#define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
+				   S3C2410_UCON_RXILEVEL  | \
+				   S3C2410_UCON_TXIRQMODE | \
+				   S3C2410_UCON_RXIRQMODE | \
+				   S3C2410_UCON_RXFIFO_TOI)
+
+#define S3C2410_UFCON_FIFOMODE	  (1<<0)
+#define S3C2410_UFCON_TXTRIG0	  (0<<6)
+#define S3C2410_UFCON_RXTRIG8	  (1<<4)
+#define S3C2410_UFCON_RXTRIG12	  (2<<4)
+
+/* S3C2440 FIFO trigger levels */
+#define S3C2440_UFCON_RXTRIG1	  (0<<4)
+#define S3C2440_UFCON_RXTRIG8	  (1<<4)
+#define S3C2440_UFCON_RXTRIG16	  (2<<4)
+#define S3C2440_UFCON_RXTRIG32	  (3<<4)
+
+#define S3C2440_UFCON_TXTRIG0	  (0<<6)
+#define S3C2440_UFCON_TXTRIG16	  (1<<6)
+#define S3C2440_UFCON_TXTRIG32	  (2<<6)
+#define S3C2440_UFCON_TXTRIG48	  (3<<6)
+
+#define S3C2410_UFCON_RESETBOTH	  (3<<1)
+#define S3C2410_UFCON_RESETTX	  (1<<2)
+#define S3C2410_UFCON_RESETRX	  (1<<1)
+
+#define S3C2410_UFCON_DEFAULT	  (S3C2410_UFCON_FIFOMODE | \
+				   S3C2410_UFCON_TXTRIG0  | \
+				   S3C2410_UFCON_RXTRIG8 )
+
+#define	S3C2410_UMCOM_AFC	  (1<<4)
+#define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
+
+#define S3C2412_UMCON_AFC_63	(0<<5)		/* same as s3c2443 */
+#define S3C2412_UMCON_AFC_56	(1<<5)
+#define S3C2412_UMCON_AFC_48	(2<<5)
+#define S3C2412_UMCON_AFC_40	(3<<5)
+#define S3C2412_UMCON_AFC_32	(4<<5)
+#define S3C2412_UMCON_AFC_24	(5<<5)
+#define S3C2412_UMCON_AFC_16	(6<<5)
+#define S3C2412_UMCON_AFC_8	(7<<5)
+
+#define S3C2410_UFSTAT_TXFULL	  (1<<9)
+#define S3C2410_UFSTAT_RXFULL	  (1<<8)
+#define S3C2410_UFSTAT_TXMASK	  (15<<4)
+#define S3C2410_UFSTAT_TXSHIFT	  (4)
+#define S3C2410_UFSTAT_RXMASK	  (15<<0)
+#define S3C2410_UFSTAT_RXSHIFT	  (0)
+
+/* UFSTAT S3C2443 same as S3C2440 */
+#define S3C2440_UFSTAT_TXFULL	  (1<<14)
+#define S3C2440_UFSTAT_RXFULL	  (1<<6)
+#define S3C2440_UFSTAT_TXSHIFT	  (8)
+#define S3C2440_UFSTAT_RXSHIFT	  (0)
+#define S3C2440_UFSTAT_TXMASK	  (63<<8)
+#define S3C2440_UFSTAT_RXMASK	  (63)
+
+#define S3C2410_UTRSTAT_TXE	  (1<<2)
+#define S3C2410_UTRSTAT_TXFE	  (1<<1)
+#define S3C2410_UTRSTAT_RXDR	  (1<<0)
+
+#define S3C2410_UERSTAT_OVERRUN	  (1<<0)
+#define S3C2410_UERSTAT_FRAME	  (1<<2)
+#define S3C2410_UERSTAT_BREAK	  (1<<3)
+#define S3C2443_UERSTAT_PARITY	  (1<<1)
+
+#define S3C2410_UERSTAT_ANY	  (S3C2410_UERSTAT_OVERRUN | \
+				   S3C2410_UERSTAT_FRAME | \
+				   S3C2410_UERSTAT_BREAK)
+
+#define S3C2410_UMSTAT_CTS	  (1<<0)
+#define S3C2410_UMSTAT_DeltaCTS	  (1<<2)
+
+#define S3C2443_DIVSLOT		  (0x2C)
+
+#ifndef __ASSEMBLY__
+
+/* struct s3c24xx_uart_clksrc
+ *
+ * this structure defines a named clock source that can be used for the
+ * uart, so that the best clock can be selected for the requested baud
+ * rate.
+ *
+ * min_baud and max_baud define the range of baud-rates this clock is
+ * acceptable for, if they are both zero, it is assumed any baud rate that
+ * can be generated from this clock will be used.
+ *
+ * divisor gives the divisor from the clock to the one seen by the uart
+*/
+
+struct s3c24xx_uart_clksrc {
+	const char	*name;
+	unsigned int	 divisor;
+	unsigned int	 min_baud;
+	unsigned int	 max_baud;
+};
+
+/* configuration structure for per-machine configurations for the
+ * serial port
+ *
+ * the pointer is setup by the machine specific initialisation from the
+ * arch/arm/mach-s3c2410/ directory.
+*/
+
+struct s3c2410_uartcfg {
+	unsigned char	   hwport;	 /* hardware port number */
+	unsigned char	   unused;
+	unsigned short	   flags;
+	upf_t		   uart_flags;	 /* default uart flags */
+
+	unsigned long	   ucon;	 /* value of ucon for port */
+	unsigned long	   ulcon;	 /* value of ulcon for port */
+	unsigned long	   ufcon;	 /* value of ufcon for port */
+
+	struct s3c24xx_uart_clksrc *clocks;
+	unsigned int		    clocks_size;
+};
+
+/* s3c24xx_uart_devs
+ *
+ * this is exported from the core as we cannot use driver_register(),
+ * or platform_add_device() before the console_initcall()
+*/
+
+extern struct platform_device *s3c24xx_uart_devs[3];
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h
new file mode 100644
index 0000000..cc0eedd
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-timer.h
@@ -0,0 +1,115 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Timer configuration
+*/
+
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
+#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
+
+#define S3C2410_TCFG0	      S3C_TIMERREG(0x00)
+#define S3C2410_TCFG1	      S3C_TIMERREG(0x04)
+#define S3C2410_TCON	      S3C_TIMERREG(0x08)
+
+#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
+#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
+#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
+#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
+#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
+
+#define S3C2410_TCFG1_MUX4_DIV2	  (0<<16)
+#define S3C2410_TCFG1_MUX4_DIV4	  (1<<16)
+#define S3C2410_TCFG1_MUX4_DIV8	  (2<<16)
+#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
+#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
+#define S3C2410_TCFG1_MUX4_MASK	  (15<<16)
+#define S3C2410_TCFG1_MUX4_SHIFT  (16)
+
+#define S3C2410_TCFG1_MUX3_DIV2	  (0<<12)
+#define S3C2410_TCFG1_MUX3_DIV4	  (1<<12)
+#define S3C2410_TCFG1_MUX3_DIV8	  (2<<12)
+#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
+#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
+#define S3C2410_TCFG1_MUX3_MASK	  (15<<12)
+
+
+#define S3C2410_TCFG1_MUX2_DIV2	  (0<<8)
+#define S3C2410_TCFG1_MUX2_DIV4	  (1<<8)
+#define S3C2410_TCFG1_MUX2_DIV8	  (2<<8)
+#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
+#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
+#define S3C2410_TCFG1_MUX2_MASK	  (15<<8)
+
+
+#define S3C2410_TCFG1_MUX1_DIV2	  (0<<4)
+#define S3C2410_TCFG1_MUX1_DIV4	  (1<<4)
+#define S3C2410_TCFG1_MUX1_DIV8	  (2<<4)
+#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
+#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
+#define S3C2410_TCFG1_MUX1_MASK	  (15<<4)
+
+#define S3C2410_TCFG1_MUX0_DIV2	  (0<<0)
+#define S3C2410_TCFG1_MUX0_DIV4	  (1<<0)
+#define S3C2410_TCFG1_MUX0_DIV8	  (2<<0)
+#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
+#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
+#define S3C2410_TCFG1_MUX0_MASK	  (15<<0)
+
+#define S3C2410_TCFG1_MUX_DIV2	  (0<<0)
+#define S3C2410_TCFG1_MUX_DIV4	  (1<<0)
+#define S3C2410_TCFG1_MUX_DIV8	  (2<<0)
+#define S3C2410_TCFG1_MUX_DIV16   (3<<0)
+#define S3C2410_TCFG1_MUX_TCLK    (4<<0)
+#define S3C2410_TCFG1_MUX_MASK	  (15<<0)
+
+#define S3C2410_TCFG1_SHIFT(x)	  ((x) * 4)
+
+/* for each timer, we have an count buffer, an compare buffer and
+ * an observation buffer
+*/
+
+/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
+
+#define S3C2410_TCNTB(tmr)    S3C_TIMERREG2(tmr, 0x00)
+#define S3C2410_TCMPB(tmr)    S3C_TIMERREG2(tmr, 0x04)
+#define S3C2410_TCNTO(tmr)    S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
+
+#define S3C2410_TCON_T4RELOAD	  (1<<22)
+#define S3C2410_TCON_T4MANUALUPD  (1<<21)
+#define S3C2410_TCON_T4START	  (1<<20)
+
+#define S3C2410_TCON_T3RELOAD	  (1<<19)
+#define S3C2410_TCON_T3INVERT	  (1<<18)
+#define S3C2410_TCON_T3MANUALUPD  (1<<17)
+#define S3C2410_TCON_T3START	  (1<<16)
+
+#define S3C2410_TCON_T2RELOAD	  (1<<15)
+#define S3C2410_TCON_T2INVERT	  (1<<14)
+#define S3C2410_TCON_T2MANUALUPD  (1<<13)
+#define S3C2410_TCON_T2START	  (1<<12)
+
+#define S3C2410_TCON_T1RELOAD	  (1<<11)
+#define S3C2410_TCON_T1INVERT	  (1<<10)
+#define S3C2410_TCON_T1MANUALUPD  (1<<9)
+#define S3C2410_TCON_T1START	  (1<<8)
+
+#define S3C2410_TCON_T0DEADZONE	  (1<<4)
+#define S3C2410_TCON_T0RELOAD	  (1<<3)
+#define S3C2410_TCON_T0INVERT	  (1<<2)
+#define S3C2410_TCON_T0MANUALUPD  (1<<1)
+#define S3C2410_TCON_T0START	  (1<<0)
+
+#endif /*  __ASM_ARCH_REGS_TIMER_H */
+
+
+
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
new file mode 100644
index 0000000..4df006b
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -0,0 +1,155 @@
+/* linux/include/asm-arm/plat-s3c/uncompress.h
+ *
+ * Copyright 2003, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_UNCOMPRESS_H
+#define __ASM_PLAT_UNCOMPRESS_H
+
+typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
+
+/* uart setup */
+
+static unsigned int fifo_mask;
+static unsigned int fifo_max;
+
+/* forward declerations */
+
+static void arch_detect_cpu(void);
+
+/* defines for UART registers */
+
+#include <plat/regs-serial.h>
+#include <asm/plat-s3c/regs-watchdog.h>
+
+/* working in physical space... */
+#undef S3C2410_WDOGREG
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX	 (14)
+
+#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
+
+static __inline__ void
+uart_wr(unsigned int reg, unsigned int val)
+{
+	volatile unsigned int *ptr;
+
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	*ptr = val;
+}
+
+static __inline__ unsigned int
+uart_rd(unsigned int reg)
+{
+	volatile unsigned int *ptr;
+
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	return *ptr;
+}
+
+/* we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+*/
+
+static void putc(int ch)
+{
+	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+		int level;
+
+		while (1) {
+			level = uart_rd(S3C2410_UFSTAT);
+			level &= fifo_mask;
+
+			if (level < fifo_max)
+				break;
+		}
+
+	} else {
+		/* not using fifos */
+
+		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+			barrier();
+	}
+
+	/* write byte to transmission register */
+	uart_wr(S3C2410_UTXH, ch);
+}
+
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+
+/* CONFIG_S3C_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+*/
+
+#ifdef CONFIG_S3C_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+static inline void arch_decomp_wdog(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+#ifdef CONFIG_S3C_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System resetting\n");
+
+	__raw_writel(0x4000, S3C2410_WTDAT);
+	__raw_writel(0x4000, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+	while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+static void error(char *err);
+
+static void
+arch_decomp_setup(void)
+{
+	/* we may need to setup the uart(s) here if we are not running
+	 * on an BAST... the BAST will have left the uarts configured
+	 * after calling linux.
+	 */
+
+	arch_detect_cpu();
+	arch_decomp_wdog_start();
+}
+
+
+#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 54d4b8e..a005ddb 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -39,16 +39,16 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 /* clock information */
 
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1863a1b..3098736 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,7 +33,6 @@
 
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
@@ -40,9 +40,9 @@
 
 #include <asm/plat-s3c/nand.h>
 
-#include <asm/plat-s3c24xx/common-smdk.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/common-smdk.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
 
 /* LED devices */
 
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 89ce60e..22a3295 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -29,11 +29,11 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/delay.h>
 #include <asm/cacheflush.h>
 
 #include <asm/mach/arch.h>
@@ -42,18 +42,18 @@
 #include <mach/system-reset.h>
 
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
-
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/s3c2400.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2412.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s3c2400.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2412.h>
 #include "s3c244x.h"
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/s3c2442.h>
-#include <asm/plat-s3c24xx/s3c2443.h>
+#include <plat/s3c2440.h>
+#include <plat/s3c2442.h>
+#include <plat/s3c2443.h>
 
 struct cpu_table {
 	unsigned long	idcode;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index d6fb765..e93f8bf 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -19,20 +19,20 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <mach/fb.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <asm/plat-s3c24xx/udc.h>
 
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
 /* Serial port registrations */
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 08c2aaf..1baf941 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -26,17 +26,17 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/dma.h>
 
 #include <asm/mach/dma.h>
 #include <mach/map.h>
 
-#include <asm/plat-s3c24xx/dma.h>
+#include <plat/dma.h>
 
 /* io map for dma */
 static void __iomem *dma_base;
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index dd27334..4a899c2 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -26,10 +26,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <mach/regs-gpio.h>
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/clock.h b/arch/arm/plat-s3c24xx/include/plat/clock.h
new file mode 100644
index 0000000..235b753
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/clock.h
@@ -0,0 +1,64 @@
+/* linux/include/asm-arm/plat-s3c24xx/clock.h
+ * linux/arch/arm/mach-s3c2410/clock.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct clk {
+	struct list_head      list;
+	struct module        *owner;
+	struct clk           *parent;
+	const char           *name;
+	int		      id;
+	int		      usage;
+	unsigned long         rate;
+	unsigned long         ctrlbit;
+
+	int		    (*enable)(struct clk *, int enable);
+	int		    (*set_rate)(struct clk *c, unsigned long rate);
+	unsigned long	    (*get_rate)(struct clk *c);
+	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
+	int		    (*set_parent)(struct clk *c, struct clk *parent);
+};
+
+/* other clocks which may be registered by board support */
+
+extern struct clk s3c24xx_dclk0;
+extern struct clk s3c24xx_dclk1;
+extern struct clk s3c24xx_clkout0;
+extern struct clk s3c24xx_clkout1;
+extern struct clk s3c24xx_uclk;
+
+extern struct clk clk_usb_bus;
+
+/* core clock support */
+
+extern struct clk clk_f;
+extern struct clk clk_h;
+extern struct clk clk_p;
+extern struct clk clk_mpll;
+extern struct clk clk_upll;
+extern struct clk clk_xtal;
+
+/* exports for arch/arm/mach-s3c2410
+ *
+ * Please DO NOT use these outside of arch/arm/mach-s3c2410
+*/
+
+extern struct mutex clocks_mutex;
+
+extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
+
+extern int s3c24xx_register_clock(struct clk *clk);
+extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
+
+extern int s3c24xx_setup_clocks(unsigned long xtal,
+				unsigned long fclk,
+				unsigned long hclk,
+				unsigned long pclk);
diff --git a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h b/arch/arm/plat-s3c24xx/include/plat/common-smdk.h
new file mode 100644
index 0000000..58d9094
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/common-smdk.h
@@ -0,0 +1,15 @@
+/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Common code for SMDK2410 and SMDK2440 boards
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void smdk_machine_init(void);
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu.h b/arch/arm/plat-s3c24xx/include/plat/cpu.h
new file mode 100644
index 0000000..23e420e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu.h
@@ -0,0 +1,54 @@
+/* linux/include/asm-arm/plat-s3c24xx/cpu.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* todo - fix when rmk changes iodescs to use `void __iomem *` */
+
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
+
+/* forward declaration */
+struct s3c24xx_uart_resources;
+struct platform_device;
+struct s3c2410_uartcfg;
+struct map_desc;
+
+/* core initialisation functions */
+
+extern void s3c24xx_init_irq(void);
+
+extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+
+extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c24xx_init_clocks(int xtal);
+
+extern void s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no);
+
+/* timer for 2410/2440 */
+
+struct sys_timer;
+extern struct sys_timer s3c24xx_timer;
+
+/* system device classes */
+
+extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2412_sysclass;
+extern struct sysdev_class s3c2440_sysclass;
+extern struct sysdev_class s3c2442_sysclass;
+extern struct sysdev_class s3c2443_sysclass;
diff --git a/arch/arm/plat-s3c24xx/include/plat/devs.h b/arch/arm/plat-s3c24xx/include/plat/devs.h
new file mode 100644
index 0000000..badaac9
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/devs.h
@@ -0,0 +1,49 @@
+/* linux/include/asm-arm/plat-s3c24xx/devs.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 standard platform devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+#include <linux/platform_device.h>
+
+struct s3c24xx_uart_resources {
+	struct resource		*resources;
+	unsigned long		 nr_resources;
+};
+
+extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+
+extern struct platform_device *s3c24xx_uart_devs[];
+extern struct platform_device *s3c24xx_uart_src[];
+
+extern struct platform_device s3c_device_timer[];
+
+extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_wdt;
+extern struct platform_device s3c_device_i2c;
+extern struct platform_device s3c_device_iis;
+extern struct platform_device s3c_device_rtc;
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_hsmmc;
+
+extern struct platform_device s3c_device_spi0;
+extern struct platform_device s3c_device_spi1;
+
+extern struct platform_device s3c_device_nand;
+
+extern struct platform_device s3c_device_usbgadget;
+
+/* s3c2440 specific devices */
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern struct platform_device s3c_device_camif;
+
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma.h
new file mode 100644
index 0000000..c78efe3
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/dma.h
@@ -0,0 +1,82 @@
+/* linux/include/asm-arm/plat-s3c24xx/dma.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct sysdev_class dma_sysclass;
+extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+#define DMA_CH_VALID		(1<<31)
+#define DMA_CH_NEVER		(1<<30)
+
+struct s3c24xx_dma_addr {
+	unsigned long		from;
+	unsigned long		to;
+};
+
+/* struct s3c24xx_dma_map
+ *
+ * this holds the mapping information for the channel selected
+ * to be connected to the specified device
+*/
+
+struct s3c24xx_dma_map {
+	const char		*name;
+	struct s3c24xx_dma_addr  hw_addr;
+
+	unsigned long		 channels[S3C2410_DMA_CHANNELS];
+	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
+};
+
+struct s3c24xx_dma_selection {
+	struct s3c24xx_dma_map	*map;
+	unsigned long		 map_size;
+	unsigned long		 dcon_mask;
+
+	void	(*select)(struct s3c2410_dma_chan *chan,
+			  struct s3c24xx_dma_map *map);
+
+	void	(*direction)(struct s3c2410_dma_chan *chan,
+			     struct s3c24xx_dma_map *map,
+			     enum s3c2410_dmasrc dir);
+};
+
+extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
+
+/* struct s3c24xx_dma_order_ch
+ *
+ * channel map for one of the `enum dma_ch` dma channels. the list
+ * entry contains a set of low-level channel numbers, orred with
+ * DMA_CH_VALID, which are checked in the order in the array.
+*/
+
+struct s3c24xx_dma_order_ch {
+	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
+	unsigned int	flags;				/* flags */
+};
+
+/* struct s3c24xx_dma_order
+ *
+ * information provided by either the core or the board to give the
+ * dma system a hint on how to allocate channels
+*/
+
+struct s3c24xx_dma_order {
+	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
+};
+
+extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
+
+/* DMA init code, called from the cpu support code */
+
+extern int s3c2410_dma_init(void);
+
+extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+			    unsigned int stride);
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
new file mode 100644
index 0000000..45746a9
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
@@ -0,0 +1,109 @@
+/* linux/include/asm-arm/plat-s3c24xx/irq.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+#define EXTINT_OFF (IRQ_EINT4 - 4)
+
+/* these are exported for arch/arm/mach-* usage */
+extern struct irq_chip s3c_irq_level_chip;
+extern struct irq_chip s3c_irq_chip;
+
+static inline void
+s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+		int subcheck)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+
+	/* check to see if we need to mask the parent IRQ */
+
+	if ((submask  & subcheck) == subcheck) {
+		__raw_writel(mask | parentbit, S3C2410_INTMSK);
+	}
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+
+}
+
+static inline void
+s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+	mask &= ~parentbit;
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+	__raw_writel(mask, S3C2410_INTMSK);
+}
+
+
+static inline void
+s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	s3c_irqsub_mask(irqno, parentmask, group);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
+
+static inline void
+s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
+
+/* exported for use in arch/arm/mach-s3c2410 */
+
+#ifdef CONFIG_PM
+extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#endif
+
+extern int s3c_irqext_type(unsigned int irq, unsigned int type);
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm.h b/arch/arm/plat-s3c24xx/include/plat/pm.h
new file mode 100644
index 0000000..cc62366
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/pm.h
@@ -0,0 +1,73 @@
+/* linux/include/asm-arm/plat-s3c24xx/pm.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* s3c2410_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#ifdef CONFIG_PM
+
+extern __init int s3c2410_pm_init(void);
+
+#else
+
+static inline int s3c2410_pm_init(void)
+{
+	return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+extern unsigned long s3c_irqwake_intallow;
+extern unsigned long s3c_irqwake_eintallow;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+/* from sleep.S */
+
+extern int  s3c2410_cpu_save(unsigned long *saveblk);
+extern void s3c2410_cpu_suspend(void);
+extern void s3c2410_cpu_resume(void);
+
+extern unsigned long s3c2410_sleep_save_phys;
+
+/* sleep save info */
+
+struct sleep_save {
+	void __iomem	*reg;
+	unsigned long	val;
+};
+
+#define SAVE_ITEM(x) \
+	{ .reg = (x) }
+
+extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume  NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
new file mode 100644
index 0000000..3a5a168
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *     09-Fev-2006 LCVR  First version, based on s3c2410.h
+*/
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern  int s3c2400_init(void);
+
+extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2400_init_clocks(int xtal);
+
+#else
+#define s3c2400_init_clocks NULL
+#define s3c2400_init_uarts NULL
+#define s3c2400_map_io NULL
+#define s3c2400_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
new file mode 100644
index 0000000..3cd1ec6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 machine directory
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifdef CONFIG_CPU_S3C2410
+
+extern  int s3c2410_init(void);
+
+extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2410_init_clocks(int xtal);
+
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#endif
+
+extern int s3c2410_baseclk_add(void);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
new file mode 100644
index 0000000..3ec9768
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2412 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern  int s3c2412_init(void);
+
+extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2412_init_clocks(int xtal);
+
+extern  int s3c2412_baseclk_add(void);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
new file mode 100644
index 0000000..107853b
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2440
+extern  int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
new file mode 100644
index 0000000..451a23a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2442
+extern  int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
new file mode 100644
index 0000000..11d83b5
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
@@ -0,0 +1,32 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2443 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2443
+
+struct s3c2410_uartcfg;
+
+extern  int s3c2443_init(void);
+
+extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2443_init_clocks(int xtal);
+
+extern  int s3c2443_baseclk_add(void);
+
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 36cefe1..963f7a4 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -55,19 +55,19 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
 
 /* wakeup irq control */
 
@@ -468,7 +468,6 @@ static void s3c_irq_demux_adc(unsigned int irq,
 {
 	unsigned int subsrc, submsk;
 	unsigned int offset = 9;
-	struct irq_desc *mydesc;
 
 	/* read the current pending interrupts, and the mask
 	 * for what it is available */
@@ -482,12 +481,10 @@ static void s3c_irq_demux_adc(unsigned int irq,
 
 	if (subsrc != 0) {
 		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_TC;
-			desc_handle_irq(IRQ_TC, mydesc);
+			generic_handle_irq(IRQ_TC);
 		}
 		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_ADC;
-			desc_handle_irq(IRQ_ADC, mydesc);
+			generic_handle_irq(IRQ_ADC);
 		}
 	}
 }
@@ -496,7 +493,6 @@ static void s3c_irq_demux_uart(unsigned int start)
 {
 	unsigned int subsrc, submsk;
 	unsigned int offset = start - IRQ_S3CUART_RX0;
-	struct irq_desc *desc;
 
 	/* read the current pending interrupts, and the mask
 	 * for what it is available */
@@ -512,20 +508,14 @@ static void s3c_irq_demux_uart(unsigned int start)
 	subsrc &= 7;
 
 	if (subsrc != 0) {
-		desc = irq_desc + start;
-
 		if (subsrc & 1)
-			desc_handle_irq(start, desc);
-
-		desc++;
+			generic_handle_irq(start);
 
 		if (subsrc & 2)
-			desc_handle_irq(start+1, desc);
-
-		desc++;
+			generic_handle_irq(start+1);
 
 		if (subsrc & 4)
-			desc_handle_irq(start+2, desc);
+			generic_handle_irq(start+2);
 	}
 }
 
@@ -572,7 +562,7 @@ s3c_irq_demux_extint8(unsigned int irq,
 		eintpnd &= ~(1<<irq);
 
 		irq += (IRQ_EINT4 - 4);
-		desc_handle_irq(irq, irq_desc + irq);
+		generic_handle_irq(irq);
 	}
 
 }
@@ -595,7 +585,7 @@ s3c_irq_demux_extint4t7(unsigned int irq,
 
 		irq += (IRQ_EINT4 - 4);
 
-		desc_handle_irq(irq, irq_desc + irq);
+		generic_handle_irq(irq);
 	}
 }
 
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index e670501..21dfa74 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -20,12 +20,12 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 #include <linux/device.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
@@ -33,7 +33,7 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
 
 #define COPYRIGHT ", (c) 2005 Simtec Electronics"
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index fc4b731..8efb57a 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -35,12 +35,12 @@
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/io.h>
 
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
@@ -48,7 +48,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
 
 /* for external use */
 
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index 306cc9c..3fad68a 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -24,10 +24,10 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/regs-timer.h>
 
 /* Each of the timers 0 through 5 go through the following
  * clock tree, with the inputs depending on the timers.
@@ -315,7 +315,7 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
 	if (parent == s3c24xx_pwmclk_tclk(id))
 		bits = S3C2410_TCFG1_MUX_TCLK << shift;
 	else if (parent == s3c24xx_pwmclk_tdiv(id))
-		bits = clk_pwm_tdiv_bits(to_tdiv(clk)) << shift;
+		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
 	else
 		return -EINVAL;
 
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 7a92c93..ec56b88 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -19,8 +19,8 @@
 #include <linux/io.h>
 #include <linux/pwm.h>
 
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
 
 struct pwm_device {
 	struct list_head	 list;
@@ -56,7 +56,7 @@ static struct clk *clk_scaler[2];
 		}					\
 	}
 
-#define DEFINE_TIMER(_tmr_no, _irq)			\
+#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
 	.name		= "s3c24xx-pwm",		\
 	.id		= _tmr_no,			\
 	.num_resources	= TIMER_RESOURCE_SIZE,		\
@@ -67,11 +67,11 @@ static struct clk *clk_scaler[2];
  */
 
 struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_TIMER(4, IRQ_TIMER4) },
+	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
+	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
+	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
+	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
+	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
 };
 
 static inline int pwm_is_tdiv(struct pwm_device *pwm)
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index 8a5fffd..7c09773 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -33,16 +33,16 @@
 #include <linux/ioport.h>
 #include <linux/mutex.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <mach/regs-clock.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
 {
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index f3dc38c..0902afd 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -24,19 +24,19 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
 
 /* camera irq */
 
@@ -44,7 +44,6 @@ static void s3c_irq_demux_cam(unsigned int irq,
 			      struct irq_desc *desc)
 {
 	unsigned int subsrc, submsk;
-	struct irq_desc *mydesc;
 
 	/* read the current pending interrupts, and the mask
 	 * for what it is available */
@@ -58,12 +57,10 @@ static void s3c_irq_demux_cam(unsigned int irq,
 
 	if (subsrc != 0) {
 		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_S3C2440_CAM_C;
-			desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc);
+			generic_handle_irq(IRQ_S3C2440_CAM_C);
 		}
 		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_S3C2440_CAM_P;
-			desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc);
+			generic_handle_irq(IRQ_S3C2440_CAM_P);
 		}
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 281b480..c0344fa 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -20,28 +20,28 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-gpioj.h>
 #include <mach/regs-dsc.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
 #include "s3c244x.h"
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 4981a08b..76594b2 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -32,7 +32,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-mem.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
  * reset the UART configuration, only enable if you really need this!
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index b471a21..c519162 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -25,20 +25,20 @@
 #include <linux/irq.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <mach/map.h>
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/regs-timer.h>
 #include <mach/regs-irq.h>
 #include <asm/mach/time.h>
 
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 static unsigned long timer_startval;
 static unsigned long timer_usec_ticks;
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 56281c0..43aa202 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Wed Aug 13 21:56:02 2008
+# Last update: Thu Sep 25 10:10:50 2008
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1810,7 +1810,7 @@ kriss_sensor		MACH_KRISS_SENSOR	KRISS_SENSOR		1819
 pilz_pmi5		MACH_PILZ_PMI5		PILZ_PMI5		1820
 jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
-gprisc3			MACH_GPRISC4		GPRISC4			1823
+gprisc3			MACH_GPRISC3		GPRISC3			1823
 stamp9260		MACH_STAMP9260		STAMP9260		1824
 smdk6430		MACH_SMDK6430		SMDK6430		1825
 smdkc100		MACH_SMDKC100		SMDKC100		1826
@@ -1859,5 +1859,43 @@ kbio9260		MACH_KBIO9260		KBIO9260		1868
 ginza			MACH_GINZA		GINZA			1869
 a636n			MACH_A636N		A636N			1870
 imx27ipcam		MACH_IMX27IPCAM		IMX27IPCAM		1871
-nenoc			MACH_NEMOC		NEMOC			1872
+nemoc			MACH_NEMOC		NEMOC			1872
 geneva			MACH_GENEVA		GENEVA			1873
+htcpharos		MACH_HTCPHAROS		HTCPHAROS		1874
+neonc			MACH_NEONC		NEONC			1875
+nas7100			MACH_NAS7100		NAS7100			1876
+teuphone		MACH_TEUPHONE		TEUPHONE		1877
+annax_eth2		MACH_ANNAX_ETH2		ANNAX_ETH2		1878
+csb733			MACH_CSB733		CSB733			1879
+bk3			MACH_BK3		BK3			1880
+omap_em32		MACH_OMAP_EM32		OMAP_EM32		1881
+et9261cp		MACH_ET9261CP		ET9261CP		1882
+jasperc			MACH_JASPERC		JASPERC			1883
+issi_arm9		MACH_ISSI_ARM9		ISSI_ARM9		1884
+ued			MACH_UED		UED			1885
+esiblade		MACH_ESIBLADE		ESIBLADE		1886
+eye02			MACH_EYE02		EYE02			1887
+imx27kbd		MACH_IMX27KBD		IMX27KBD		1888
+sst61vc010_fpga		MACH_SST61VC010_FPGA	SST61VC010_FPGA		1889
+kixvp435		MACH_KIXVP435		KIXVP435		1890
+kixnp435		MACH_KIXNP435		KIXNP435		1891
+africa			MACH_AFRICA		AFRICA			1892
+nh233			MACH_NH233		NH233			1893
+rd88f6183ap_ge		MACH_RD88F6183AP_GE	RD88F6183AP_GE		1894
+bcm4760			MACH_BCM4760		BCM4760			1895
+eddy_v2			MACH_EDDY_V2		EDDY_V2			1896
+realview_pba8		MACH_REALVIEW_PBA8	REALVIEW_PBA8		1897
+hid_a7			MACH_HID_A7		HID_A7			1898
+hero			MACH_HERO		HERO			1899
+omap_poseidon		MACH_OMAP_POSEIDON	OMAP_POSEIDON		1900
+realview_pbx		MACH_REALVIEW_PBX	REALVIEW_PBX		1901
+micro9s			MACH_MICRO9S		MICRO9S			1902
+mako			MACH_MAKO		MAKO			1903
+xdaflame		MACH_XDAFLAME		XDAFLAME		1904
+phidget_sbc2		MACH_PHIDGET_SBC2	PHIDGET_SBC2		1905
+limestone		MACH_LIMESTONE		LIMESTONE		1906
+iprobe_c32		MACH_IPROBE_C32		IPROBE_C32		1907
+rut100			MACH_RUT100		RUT100			1908
+asusp535		MACH_ASUSP535		ASUSP535		1909
+htcraphael		MACH_HTCRAPHAEL		HTCRAPHAEL		1910
+sygdg1			MACH_SYGDG1		SYGDG1			1911
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 806ce26..ba592a9 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -21,13 +21,13 @@
 #include <asm/assembler.h>
 #include <asm/vfpmacros.h>
 
-	.globl	do_vfp
-do_vfp:
+ENTRY(do_vfp)
 	enable_irq
  	ldr	r4, .LCvfp
 	ldr	r11, [r10, #TI_CPU]	@ CPU number
 	add	r10, r10, #TI_VFPSTATE	@ r10 = workspace
 	ldr	pc, [r4]		@ call VFP entry point
+ENDPROC(do_vfp)
 
 ENTRY(vfp_null_entry)
 	mov	pc, lr
@@ -40,11 +40,11 @@ ENDPROC(vfp_null_entry)
 @ failure to the VFP initialisation code.
 
 	__INIT
-	.globl	vfp_testing_entry
-vfp_testing_entry:
+ENTRY(vfp_testing_entry)
 	ldr	r0, VFP_arch_address
 	str	r5, [r0]		@ known non-zero value
 	mov	pc, r9			@ we have handled the fault
+ENDPROC(vfp_testing_entry)
 
 VFP_arch_address:
 	.word	VFP_arch
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 353f9e5c..a62dcf7 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -68,8 +68,7 @@
 @  r11 = CPU number
 @  lr  = failure return
 
-	.globl	vfp_support_entry
-vfp_support_entry:
+ENTRY(vfp_support_entry)
 	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
 
 	VFPFMRX	r1, FPEXC		@ Is the VFP enabled?
@@ -165,11 +164,10 @@ process_exception:
 					@ code will raise an exception if
 					@ required. If not, the user code will
 					@ retry the faulted instruction
+ENDPROC(vfp_support_entry)
 
 #ifdef CONFIG_SMP
-	.globl	vfp_save_state
-	.type	vfp_save_state, %function
-vfp_save_state:
+ENTRY(vfp_save_state)
 	@ Save the current VFP state
 	@ r0 - save location
 	@ r1 - FPEXC
@@ -182,13 +180,13 @@ vfp_save_state:
 	VFPFMRX	r12, FPINST2, NE	@ FPINST2 if needed (and present)
 	stmia	r0, {r1, r2, r3, r12}	@ save FPEXC, FPSCR, FPINST, FPINST2
 	mov	pc, lr
+ENDPROC(vfp_save_state)
 #endif
 
 last_VFP_context_address:
 	.word	last_VFP_context
 
-	.globl	vfp_get_float
-vfp_get_float:
+ENTRY(vfp_get_float)
 	add	pc, pc, r0, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
@@ -197,9 +195,9 @@ vfp_get_float:
 	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
 	mov	pc, lr
 	.endr
+ENDPROC(vfp_get_float)
 
-	.globl	vfp_put_float
-vfp_put_float:
+ENTRY(vfp_put_float)
 	add	pc, pc, r1, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
@@ -208,9 +206,9 @@ vfp_put_float:
 	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
 	mov	pc, lr
 	.endr
+ENDPROC(vfp_put_float)
 
-	.globl	vfp_get_double
-vfp_get_double:
+ENTRY(vfp_get_double)
 	add	pc, pc, r0, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
@@ -229,9 +227,9 @@ vfp_get_double:
 	mov	r0, #0
 	mov	r1, #0
 	mov	pc, lr
+ENDPROC(vfp_get_double)
 
-	.globl	vfp_put_double
-vfp_put_double:
+ENTRY(vfp_put_double)
 	add	pc, pc, r2, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
@@ -245,3 +243,4 @@ vfp_put_double:
 	mov	pc, lr
 	.endr
 #endif
+ENDPROC(vfp_put_double)
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 7c239a9..26eca87f 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -72,6 +72,8 @@ config GENERIC_BUG
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "System Type and features"
 
 source "kernel/time/Kconfig"
@@ -119,11 +121,19 @@ config BOARD_ATSTK1000
 config BOARD_ATNGW100
 	bool "ATNGW100 Network Gateway"
 	select CPU_AT32AP7000
+
+config BOARD_FAVR_32
+	bool "Favr-32 LCD-board"
+	select CPU_AT32AP7000
+
+config BOARD_MIMC200
+	bool "MIMC200 CPU board"
+	select CPU_AT32AP7000
 endchoice
 
-if BOARD_ATSTK1000
 source "arch/avr32/boards/atstk1000/Kconfig"
-endif
+source "arch/avr32/boards/atngw100/Kconfig"
+source "arch/avr32/boards/favr-32/Kconfig"
 
 choice
 	prompt "Boot loader type"
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index c9e1f0b..b088e10 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -33,6 +33,8 @@ head-y					+= arch/avr32/kernel/head.o
 core-y					+= $(machdirs)
 core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
 core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
+core-$(CONFIG_BOARD_FAVR_32)		+= arch/avr32/boards/favr-32/
+core-$(CONFIG_BOARD_MIMC200)		+= arch/avr32/boards/mimc200/
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
 core-y					+= arch/avr32/kernel/
 core-y					+= arch/avr32/mm/
diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
new file mode 100644
index 0000000..b3f9947
--- /dev/null
+++ b/arch/avr32/boards/atngw100/Kconfig
@@ -0,0 +1,35 @@
+# NGW100 customization
+
+if BOARD_ATNGW100
+
+config BOARD_ATNGW100_EVKLCD10X
+	bool "Add support for EVKLCD10X addon board"
+	help
+	  This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
+	  addon board for the NGW100. By enabling this the LCD controller and
+	  AC97 controller is added as platform devices.
+
+	  This choice disables the detect pin and the write-protect pin for the
+	  MCI platform device, since it conflicts with the LCD platform device.
+	  The MCI pins can be reenabled by editing the "add device function" but
+	  this may break the setup for other displays that use these pins.
+
+	  Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100.
+
+choice
+	prompt "LCD panel resolution on EVKLCD10X"
+	depends on BOARD_ATNGW100_EVKLCD10X
+	default BOARD_ATNGW100_EVKLCD10X_VGA
+
+config BOARD_ATNGW100_EVKLCD10X_QVGA
+	bool "QVGA (320x240)"
+
+config BOARD_ATNGW100_EVKLCD10X_VGA
+	bool "VGA (640x480)"
+
+config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
+	bool "Powertip QVGA (320x240)"
+
+endchoice
+
+endif	# BOARD_ATNGW100
diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
index c740aa1..6376f53 100644
--- a/arch/avr32/boards/atngw100/Makefile
+++ b/arch/avr32/boards/atngw100/Makefile
@@ -1 +1,2 @@
-obj-y				+= setup.o flash.o
+obj-y					+= setup.o flash.o
+obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X)	+= evklcd10x.o
diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c
new file mode 100644
index 0000000..8140b22
--- /dev/null
+++ b/arch/avr32/boards/atngw100/evklcd10x.c
@@ -0,0 +1,155 @@
+/*
+ * Board-specific setup code for the ATEVKLCD10X addon board to the ATNGW100
+ * Network Gateway
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+
+static struct ac97c_platform_data __initdata ac97c0_data = {
+	.dma_rx_periph_id	= 3,
+	.dma_tx_periph_id	= 4,
+	.dma_controller_id	= 0,
+	.reset_pin		= GPIO_PIN_PB(19),
+};
+
+#ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA
+static struct fb_videomode __initdata tcg057vglad_modes[] = {
+	{
+		.name		= "640x480 @ 60",
+		.refresh	= 60,
+		.xres		= 640,		.yres		= 480,
+		.pixclock	= KHZ2PICOS(25180),
+
+		.left_margin	= 64,		.right_margin	= 31,
+		.upper_margin	= 34,		.lower_margin	= 2,
+		.hsync_len	= 96,		.vsync_len	= 4,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
+	.manufacturer		= "KYO",
+	.monitor		= "TCG057VGLAD",
+	.modedb			= tcg057vglad_modes,
+	.modedb_len		= ARRAY_SIZE(tcg057vglad_modes),
+	.hfmin			= 19948,
+	.hfmax			= 31478,
+	.vfmin			= 50,
+	.vfmax			= 67,
+	.dclkmax		= 28330000,
+};
+
+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &atevklcd10x_default_monspecs,
+	.guard_time		= 2,
+};
+#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA
+static struct fb_videomode __initdata tcg057qvlad_modes[] = {
+	{
+		.name		= "320x240 @ 60",
+		.refresh	= 60,
+		.xres		= 320,		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6300),
+
+		.left_margin	= 52,		.right_margin	= 28,
+		.upper_margin	= 7,		.lower_margin	= 2,
+		.hsync_len	= 96,		.vsync_len	= 4,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
+	.manufacturer		= "KYO",
+	.monitor		= "TCG057QVLAD",
+	.modedb			= tcg057qvlad_modes,
+	.modedb_len		= ARRAY_SIZE(tcg057qvlad_modes),
+	.hfmin			= 19948,
+	.hfmax			= 31478,
+	.vfmin			= 50,
+	.vfmax			= 67,
+	.dclkmax		= 7000000,
+};
+
+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &atevklcd10x_default_monspecs,
+	.guard_time		= 2,
+};
+#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA
+static struct fb_videomode __initdata ph320240t_modes[] = {
+	{
+		.name		= "320x240 @ 60",
+		.refresh	= 60,
+		.xres		= 320,		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6300),
+
+		.left_margin	= 38,		.right_margin	= 20,
+		.upper_margin	= 15,		.lower_margin	= 5,
+		.hsync_len	= 30,		.vsync_len	= 3,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
+	.manufacturer		= "POW",
+	.monitor		= "PH320240T",
+	.modedb			= ph320240t_modes,
+	.modedb_len		= ARRAY_SIZE(ph320240t_modes),
+	.hfmin			= 14400,
+	.hfmax			= 21600,
+	.vfmin			= 50,
+	.vfmax			= 90,
+	.dclkmax		= 6400000,
+};
+
+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &atevklcd10x_default_monspecs,
+	.guard_time		= 2,
+};
+#endif
+
+static int __init atevklcd10x_init(void)
+{
+	at32_add_device_ac97c(0, &ac97c0_data);
+
+	at32_add_device_lcdc(0, &atevklcd10x_lcdc_data,
+			fbmem_start, fbmem_size, 1);
+	return 0;
+}
+postcore_initcall(atevklcd10x_init);
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index b8286f1ce..32fb9ba 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -9,6 +9,7 @@
  */
 #include <linux/clk.h>
 #include <linux/etherdevice.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -53,8 +54,16 @@ static struct spi_board_info spi0_board_info[] __initdata = {
 };
 
 static struct mci_platform_data __initdata mci0_data = {
-	.detect_pin	= GPIO_PIN_PC(25),
-	.wp_pin		= GPIO_PIN_PE(0),
+	.slot[0] = {
+		.bus_width	= 4,
+#ifndef CONFIG_BOARD_ATNGW100_EVKLCD10X
+		.detect_pin	= GPIO_PIN_PC(25),
+		.wp_pin		= GPIO_PIN_PE(0),
+#else
+		.detect_pin	= GPIO_PIN_NONE,
+		.wp_pin		= GPIO_PIN_NONE,
+#endif
+	},
 };
 
 /*
@@ -168,8 +177,6 @@ static int __init atngw100_init(void)
 	 * reserve any pins for it.
 	 */
 
-	at32_add_system_devices();
-
 	at32_add_device_usart(0);
 
 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
@@ -190,7 +197,7 @@ static int __init atngw100_init(void)
 	 * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
 	 * but it's not available off-board.
 	 */
-	at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
+	at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
 	at32_select_gpio(i2c_gpio_data.sda_pin,
 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
 	at32_select_gpio(i2c_gpio_data.scl_pin,
@@ -204,6 +211,15 @@ postcore_initcall(atngw100_init);
 
 static int __init atngw100_arch_init(void)
 {
+	/* PB30 is the otherwise unused jumper on the mainboard, with an
+	 * external pullup; the jumper grounds it.  Use it however you
+	 * like, including letting U-Boot or Linux tweak boot sequences.
+	 */
+	at32_select_gpio(GPIO_PIN_PB(30), 0);
+	gpio_request(GPIO_PIN_PB(30), "j15");
+	gpio_direction_input(GPIO_PIN_PB(30));
+	gpio_export(GPIO_PIN_PB(30), false);
+
 	/* set_irq_type() after the arch_initcall for EIC has run, and
 	 * before the I2C subsystem could try using this IRQ.
 	 */
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index dfc3443..5c5cdf3 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -232,7 +232,7 @@ static void __init atstk1002_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
@@ -264,16 +264,20 @@ void __init setup_board(void)
 
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+
 /* MMC card detect requires MACB0 *NOT* be used */
 #ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
-static struct mci_platform_data __initdata mci0_data = {
-	.detect_pin	= GPIO_PIN_PC(14),	/* gpio30/sdcd */
-	.wp_pin		= GPIO_PIN_PC(15),	/* gpio31/sdwp */
-};
-#define MCI_PDATA	&mci0_data
+		.detect_pin	= GPIO_PIN_PC(14), /* gpio30/sdcd */
+		.wp_pin		= GPIO_PIN_PC(15), /* gpio31/sdwp */
 #else
-#define MCI_PDATA	NULL
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
 #endif	/* SW6 for sd{cd,wp} routing */
+	},
+};
 
 #endif	/* SW2 for MMC signal routing */
 
@@ -301,8 +305,6 @@ static int __init atstk1002_init(void)
 	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
 	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
 
-	at32_add_system_devices();
-
 #ifdef CONFIG_BOARD_ATSTK1006
 	smc_set_timing(&nand_config, &nand_timing);
 	smc_set_configuration(3, &nand_config);
@@ -326,13 +328,14 @@ static int __init atstk1002_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0, MCI_PDATA);
+	at32_add_device_mci(0, &mci0_data);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size, 0);
+			     fbmem_start, fbmem_size,
+			     ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index 0cf6641..134b566 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -19,6 +19,7 @@
 #include <linux/spi/spi.h>
 
 #include <asm/setup.h>
+#include <asm/atmel-mci.h>
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
@@ -66,6 +67,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
 } };
 #endif
 
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
+	},
+};
+#endif
+
 #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 static void __init atstk1003_setup_extdac(void)
 {
@@ -84,7 +95,7 @@ static void __init atstk1003_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
@@ -138,8 +149,6 @@ static int __init atstk1003_init(void)
 	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
 	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
 
-	at32_add_system_devices();
-
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
 #else
@@ -154,7 +163,7 @@ static int __init atstk1003_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0, NULL);
+	at32_add_device_mci(0, &mci0_data);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index 50a5273..cb32eb8 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -21,6 +21,7 @@
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
+#include <asm/atmel-mci.h>
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
@@ -71,6 +72,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
 } };
 #endif
 
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
+	},
+};
+#endif
+
 #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 static void __init atstk1004_setup_extdac(void)
 {
@@ -89,7 +100,7 @@ static void __init atstk1004_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
@@ -121,8 +132,6 @@ void __init setup_board(void)
 
 static int __init atstk1004_init(void)
 {
-	at32_add_system_devices();
-
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
 #else
@@ -137,10 +146,11 @@ static int __init atstk1004_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0, NULL);
+	at32_add_device_mci(0, &mci0_data);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size, 0);
+			     fbmem_start, fbmem_size,
+			     ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
 	at32_add_device_ssc(0, ATMEL_SSC_TX);
diff --git a/arch/avr32/boards/favr-32/Kconfig b/arch/avr32/boards/favr-32/Kconfig
new file mode 100644
index 0000000..2c83d1d
--- /dev/null
+++ b/arch/avr32/boards/favr-32/Kconfig
@@ -0,0 +1,22 @@
+# Favr-32 customization
+
+if BOARD_FAVR_32
+
+config BOARD_FAVR32_ABDAC_RATE
+	int "DAC target rate"
+	default 44100
+	range 32000 50000
+	help
+	  Specify the target rate the internal DAC should try to match. This
+	  will use PLL1 to generate a frequency as close as possible to this
+	  rate.
+
+	  Must be within the range 32000 to 50000, which should be suitable to
+	  generate most other frequencies in power of 2 steps.
+
+	  Ex:
+		48000 will also suit 24000 and 12000
+		44100 will also suit 22050 and 11025
+		32000 will also suit 16000 and 8000
+
+endif # BOARD_FAVR_32
diff --git a/arch/avr32/boards/favr-32/Makefile b/arch/avr32/boards/favr-32/Makefile
new file mode 100644
index 0000000..234f215
--- /dev/null
+++ b/arch/avr32/boards/favr-32/Makefile
@@ -0,0 +1 @@
+obj-y	+= setup.o flash.o
diff --git a/arch/avr32/boards/favr-32/flash.c b/arch/avr32/boards/favr-32/flash.c
new file mode 100644
index 0000000..5f139b7
--- /dev/null
+++ b/arch/avr32/boards/favr-32/flash.c
@@ -0,0 +1,98 @@
+/*
+ * Favr-32 board-specific flash initialization
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/arch/smc.h>
+
+static struct smc_timing flash_timing __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 40,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 10,
+
+	.ncs_read_pulse		= 80,
+	.nrd_pulse		= 40,
+	.ncs_write_pulse	= 65,
+	.nwe_pulse		= 55,
+
+	.read_cycle		= 120,
+	.write_cycle		= 120,
+};
+
+static struct smc_config flash_config __initdata = {
+	.bus_width		= 2,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.byte_write		= 1,
+};
+
+static struct mtd_partition flash_parts[] = {
+	{
+		.name           = "u-boot",
+		.offset         = 0x00000000,
+		.size           = 0x00020000,           /* 128 KiB */
+		.mask_flags     = MTD_WRITEABLE,
+	},
+	{
+		.name           = "root",
+		.offset         = 0x00020000,
+		.size           = 0x007d0000,
+	},
+	{
+		.name           = "env",
+		.offset         = 0x007f0000,
+		.size           = 0x00010000,
+		.mask_flags     = MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(flash_parts),
+	.parts		= flash_parts,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x007fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+/* This needs to be called after the SMC has been initialized */
+static int __init favr32_flash_init(void)
+{
+	int ret;
+
+	smc_set_timing(&flash_config, &flash_timing);
+	ret = smc_set_configuration(0, &flash_config);
+	if (ret < 0) {
+		printk(KERN_ERR "Favr-32: failed to set NOR flash timing\n");
+		return ret;
+	}
+
+	platform_device_register(&flash_device);
+
+	return 0;
+}
+device_initcall(favr32_flash_init);
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
new file mode 100644
index 0000000..7538f3d
--- /dev/null
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -0,0 +1,352 @@
+/*
+ * Favr-32 board-specific setup code.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/bootmem.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/atmel-pwm-bl.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+
+#include <asm/arch/at32ap700x.h>
+#include <asm/arch/init.h>
+#include <asm/arch/board.h>
+#include <asm/arch/portmux.h>
+
+/* Oscillator frequencies. These are board-specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 20000000,	/* 20 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
+/* Initialized by bootloader-specific startup code. */
+struct tag *bootloader_tags __initdata;
+
+struct eth_addr {
+	u8 addr[6];
+};
+static struct eth_addr __initdata hw_addr[1];
+static struct eth_platform_data __initdata eth_data[1] = {
+	{
+		.phy_mask	= ~(1U << 1),
+	},
+};
+
+static int ads7843_get_pendown_state(void)
+{
+	return !gpio_get_value(GPIO_PIN_PB(3));
+}
+
+static struct ads7846_platform_data ads7843_data = {
+	.model			= 7843,
+	.get_pendown_state	= ads7843_get_pendown_state,
+	.pressure_max		= 255,
+	/*
+	 * Values below are for debounce filtering, these can be experimented
+	 * with further.
+	 */
+	.debounce_max		= 20,
+	.debounce_rep		= 4,
+	.debounce_tol		= 5,
+};
+
+static struct spi_board_info __initdata spi1_board_info[] = {
+	{
+		/* ADS7843 touch controller */
+		.modalias	= "ads7846",
+		.max_speed_hz	= 2000000,
+		.chip_select	= 0,
+		.bus_num	= 1,
+		.platform_data	= &ads7843_data,
+	},
+};
+
+static struct fb_videomode __initdata lb104v03_modes[] = {
+	{
+		.name		= "640x480 @ 50",
+		.refresh	= 50,
+		.xres		= 640,		.yres		= 480,
+		.pixclock	= KHZ2PICOS(25100),
+
+		.left_margin	= 90,		.right_margin	= 70,
+		.upper_margin	= 30,		.lower_margin	= 15,
+		.hsync_len	= 12,		.vsync_len	= 2,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata favr32_default_monspecs = {
+	.manufacturer		= "LG",
+	.monitor		= "LB104V03",
+	.modedb			= lb104v03_modes,
+	.modedb_len		= ARRAY_SIZE(lb104v03_modes),
+	.hfmin			= 27273,
+	.hfmax			= 31111,
+	.vfmin			= 45,
+	.vfmax			= 60,
+	.dclkmax		= 28000000,
+};
+
+struct atmel_lcdfb_info __initdata favr32_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &favr32_default_monspecs,
+	.guard_time		= 2,
+};
+
+static struct gpio_led favr32_leds[] = {
+	{
+		.name		 = "green",
+		.gpio		 = GPIO_PIN_PE(19),
+		.default_trigger = "heartbeat",
+		.active_low	 = 1,
+	},
+	{
+		.name		 = "red",
+		.gpio		 = GPIO_PIN_PE(20),
+		.active_low	 = 1,
+	},
+};
+
+static struct gpio_led_platform_data favr32_led_data = {
+	.num_leds	= ARRAY_SIZE(favr32_leds),
+	.leds		= favr32_leds,
+};
+
+static struct platform_device favr32_led_dev = {
+	.name		= "leds-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &favr32_led_data,
+	},
+};
+
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+	int i;
+
+	i = tag->u.ethernet.mac_index;
+	if (i < ARRAY_SIZE(hw_addr))
+		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+		       sizeof(hw_addr[i].addr));
+
+	return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	const u8 *addr;
+	void __iomem *regs;
+	struct clk *pclk;
+
+	if (!res)
+		return;
+	if (pdev->id >= ARRAY_SIZE(hw_addr))
+		return;
+
+	addr = hw_addr[pdev->id].addr;
+	if (!is_valid_ether_addr(addr))
+		return;
+
+	/*
+	 * Since this is board-specific code, we'll cheat and use the
+	 * physical address directly as we happen to know that it's
+	 * the same as the virtual address.
+	 */
+	regs = (void __iomem __force *)res->start;
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (!pclk)
+		return;
+
+	clk_enable(pclk);
+	__raw_writel((addr[3] << 24) | (addr[2] << 16)
+		     | (addr[1] << 8) | addr[0], regs + 0x98);
+	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+	clk_disable(pclk);
+	clk_put(pclk);
+}
+
+void __init favr32_setup_leds(void)
+{
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(favr32_leds); i++)
+		at32_select_gpio(favr32_leds[i].gpio, AT32_GPIOF_OUTPUT);
+
+	platform_device_register(&favr32_led_dev);
+}
+
+static struct atmel_pwm_bl_platform_data atmel_pwm_bl_pdata = {
+	.pwm_channel		= 2,
+	.pwm_frequency		= 200000,
+	.pwm_compare_max	= 345,
+	.pwm_duty_max		= 345,
+	.pwm_duty_min		= 90,
+	.pwm_active_low		= 1,
+	.gpio_on		= GPIO_PIN_PA(28),
+	.on_active_low		= 0,
+};
+
+static struct platform_device atmel_pwm_bl_dev = {
+	.name		= "atmel-pwm-bl",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &atmel_pwm_bl_pdata,
+	},
+};
+
+static void __init favr32_setup_atmel_pwm_bl(void)
+{
+	platform_device_register(&atmel_pwm_bl_dev);
+	at32_select_gpio(atmel_pwm_bl_pdata.gpio_on, 0);
+}
+
+void __init setup_board(void)
+{
+	at32_map_usart(3, 0);	/* USART 3 => /dev/ttyS0 */
+	at32_setup_serial_console(0);
+}
+
+static int __init set_abdac_rate(struct platform_device *pdev)
+{
+	int retval;
+	struct clk *osc1;
+	struct clk *pll1;
+	struct clk *abdac;
+
+	if (pdev == NULL)
+		return -ENXIO;
+
+	osc1 = clk_get(NULL, "osc1");
+	if (IS_ERR(osc1)) {
+		retval = PTR_ERR(osc1);
+		goto out;
+	}
+
+	pll1 = clk_get(NULL, "pll1");
+	if (IS_ERR(pll1)) {
+		retval = PTR_ERR(pll1);
+		goto out_osc1;
+	}
+
+	abdac = clk_get(&pdev->dev, "sample_clk");
+	if (IS_ERR(abdac)) {
+		retval = PTR_ERR(abdac);
+		goto out_pll1;
+	}
+
+	retval = clk_set_parent(pll1, osc1);
+	if (retval != 0)
+		goto out_abdac;
+
+	/*
+	 * Rate is 32000 to 50000 and ABDAC oversamples 256x. Multiply, in
+	 * power of 2, to a value above 80 MHz. Power of 2 so it is possible
+	 * for the generic clock to divide it down again and 80 MHz is the
+	 * lowest frequency for the PLL.
+	 */
+	retval = clk_round_rate(pll1,
+			CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16);
+	if (retval < 0)
+		goto out_abdac;
+
+	retval = clk_set_rate(pll1, retval);
+	if (retval != 0)
+		goto out_abdac;
+
+	retval = clk_set_parent(abdac, pll1);
+	if (retval != 0)
+		goto out_abdac;
+
+out_abdac:
+	clk_put(abdac);
+out_pll1:
+	clk_put(pll1);
+out_osc1:
+	clk_put(osc1);
+out:
+	return retval;
+}
+
+static int __init favr32_init(void)
+{
+	/*
+	 * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific
+	 * pins so that nobody messes with them.
+	 */
+	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
+	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
+	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
+	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
+	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
+	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
+	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
+	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
+	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
+	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
+	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
+	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
+	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
+	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
+	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
+	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
+	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+
+	at32_select_gpio(GPIO_PIN_PB(3), 0);	/* IRQ from ADS7843 */
+
+	at32_add_system_devices();
+
+	at32_add_device_usart(0);
+
+	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+
+	spi1_board_info[0].irq = gpio_to_irq(GPIO_PIN_PB(3));
+
+	set_abdac_rate(at32_add_device_abdac(0));
+
+	at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel);
+	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+	at32_add_device_mci(0, NULL);
+	at32_add_device_usba(0, NULL);
+	at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0);
+
+	favr32_setup_leds();
+
+	favr32_setup_atmel_pwm_bl();
+
+	return 0;
+}
+postcore_initcall(favr32_init);
diff --git a/arch/avr32/boards/mimc200/Makefile b/arch/avr32/boards/mimc200/Makefile
new file mode 100644
index 0000000..79c076e
--- /dev/null
+++ b/arch/avr32/boards/mimc200/Makefile
@@ -0,0 +1 @@
+obj-y				+= setup.o flash.o fram.o
diff --git a/arch/avr32/boards/mimc200/flash.c b/arch/avr32/boards/mimc200/flash.c
new file mode 100644
index 0000000..d83d650
--- /dev/null
+++ b/arch/avr32/boards/mimc200/flash.c
@@ -0,0 +1,143 @@
+/*
+ * MIMC200 board-specific flash initialization
+ *
+ * Copyright (C) 2008 Mercury IMC Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/smc.h>
+
+static struct smc_timing flash_timing __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 15,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 0,
+
+	.ncs_read_pulse		= 115,
+	.nrd_pulse		= 110,
+	.ncs_write_pulse	= 60,
+	.nwe_pulse		= 60,
+
+	.read_cycle		= 115,
+	.write_cycle		= 100,
+};
+
+static struct smc_config flash_config __initdata = {
+	.bus_width		= 2,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.byte_write		= 1,
+};
+
+/* system flash definition */
+
+static struct mtd_partition flash_parts_system[] = {
+	{
+		.name           = "u-boot",
+		.offset         = 0x00000000,
+		.size           = 0x00020000,           /* 128 KiB */
+		.mask_flags     = MTD_WRITEABLE,
+	},
+	{
+		.name           = "root",
+		.offset         = 0x00020000,
+		.size           = 0x007c0000,
+	},
+	{
+		.name		= "splash",
+		.offset		= 0x007e0000,
+		.size		= 0x00010000,		/* 64KiB */
+	},
+	{
+		.name           = "env",
+		.offset         = 0x007f0000,
+		.size           = 0x00010000,
+		.mask_flags     = MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data flash_system = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(flash_parts_system),
+	.parts		= flash_parts_system,
+};
+
+static struct resource flash_resource_system = {
+	.start		= 0x00000000,
+	.end		= 0x007fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device_system = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &flash_resource_system,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_system,
+	},
+};
+
+/* data flash definition */
+
+static struct mtd_partition flash_parts_data[] = {
+	{
+		.name		= "data",
+		.offset		= 0x00000000,
+		.size		= 0x00800000,
+	},
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(flash_parts_data),
+	.parts		= flash_parts_data,
+};
+
+static struct resource flash_resource_data = {
+	.start		= 0x08000000,
+	.end		= 0x087fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device_data = {
+	.name		= "physmap-flash",
+	.id		= 1,
+	.resource	= &flash_resource_data,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+/* This needs to be called after the SMC has been initialized */
+static int __init mimc200_flash_init(void)
+{
+	int ret;
+
+	smc_set_timing(&flash_config, &flash_timing);
+	ret = smc_set_configuration(0, &flash_config);
+	if (ret < 0) {
+		printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n");
+		return ret;
+	}
+	ret = smc_set_configuration(1, &flash_config);
+	if (ret < 0) {
+		printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n");
+		return ret;
+	}
+
+	platform_device_register(&flash_device_system);
+	platform_device_register(&flash_device_data);
+
+	return 0;
+}
+device_initcall(mimc200_flash_init);
diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c
new file mode 100644
index 0000000..54fbd95
--- /dev/null
+++ b/arch/avr32/boards/mimc200/fram.c
@@ -0,0 +1,80 @@
+/*
+ * FRAM driver for MIMC200 board
+ *
+ * Copyright 2008 Mark Jackson <mpfj@mimc.co.uk>
+ *
+ * This module adds *very* simply support for the system's FRAM device.
+ * At the moment, this is hard-coded to the MIMC200 platform, and only
+ * supports mmap().
+ */
+
+#define FRAM_VERSION	"1.0"
+
+#include <linux/miscdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+
+#define FRAM_BASE	0xac000000
+#define FRAM_SIZE	0x20000
+
+/*
+ * The are the file operation function for user access to /dev/fram
+ */
+
+static int fram_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	int ret;
+
+	ret = remap_pfn_range(vma,
+		vma->vm_start,
+		virt_to_phys((void *)((unsigned long)FRAM_BASE)) >> PAGE_SHIFT,
+		vma->vm_end-vma->vm_start,
+		PAGE_SHARED);
+
+	if (ret != 0)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static const struct file_operations fram_fops = {
+	.owner			= THIS_MODULE,
+	.mmap			= fram_mmap,
+};
+
+#define FRAM_MINOR	0
+
+static struct miscdevice fram_dev = {
+	FRAM_MINOR,
+	"fram",
+	&fram_fops
+};
+
+static int __init
+fram_init(void)
+{
+	int ret;
+
+	ret = misc_register(&fram_dev);
+	if (ret) {
+		printk(KERN_ERR "fram: can't misc_register on minor=%d\n",
+		    FRAM_MINOR);
+		return ret;
+	}
+	printk(KERN_INFO "FRAM memory driver v" FRAM_VERSION "\n");
+	return 0;
+}
+
+static void __exit
+fram_cleanup_module(void)
+{
+	misc_deregister(&fram_dev);
+}
+
+module_init(fram_init);
+module_exit(fram_cleanup_module);
+
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS_MISCDEV(FRAM_MINOR);
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
new file mode 100644
index 0000000..397cbb8
--- /dev/null
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -0,0 +1,237 @@
+/*
+ * Board-specific setup code for the MIMC200
+ *
+ * Copyright (C) 2008 Mercury IMC Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+extern struct atmel_lcdfb_info mimc200_lcdc_data;
+
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/i2c-gpio.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <video/atmel_lcdc.h>
+#include <linux/fb.h>
+
+#include <asm/atmel-mci.h>
+#include <linux/io.h>
+#include <asm/setup.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
+
+/* Oscillator frequencies. These are board-specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 10000000,	/* 10 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
+/* Initialized by bootloader-specific startup code. */
+struct tag *bootloader_tags __initdata;
+
+static struct fb_videomode __initdata tx14d14_modes[] = {
+	{
+		.name		= "640x480 @ 60",
+		.refresh	= 60,
+		.xres		= 640,		.yres		= 480,
+		.pixclock	= KHZ2PICOS(11666),
+
+		.left_margin	= 80,		.right_margin	= 1,
+		.upper_margin	= 13,		.lower_margin	= 2,
+		.hsync_len	= 64,		.vsync_len	= 1,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata mimc200_default_monspecs = {
+	.manufacturer		= "HIT",
+	.monitor		= "TX14D14VM1BAB",
+	.modedb			= tx14d14_modes,
+	.modedb_len		= ARRAY_SIZE(tx14d14_modes),
+	.hfmin			= 14820,
+	.hfmax			= 22230,
+	.vfmin			= 60,
+	.vfmax			= 73.3,
+	.dclkmax		= 25200000,
+};
+
+struct atmel_lcdfb_info __initdata mimc200_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_INVCLK
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &mimc200_default_monspecs,
+	.guard_time		= 2,
+};
+
+struct eth_addr {
+	u8 addr[6];
+};
+static struct eth_addr __initdata hw_addr[2];
+static struct eth_platform_data __initdata eth_data[2];
+
+static struct spi_eeprom eeprom_25lc010 = {
+		.name = "25lc010",
+		.byte_len = 128,
+		.page_size = 16,
+		.flags = EE_ADDR1,
+};
+
+static struct spi_board_info spi0_board_info[] __initdata = {
+	{
+		.modalias	= "rtc-ds1390",
+		.max_speed_hz	= 4000000,
+		.chip_select	= 2,
+	},
+	{
+		.modalias	= "at25",
+		.max_speed_hz	= 1000000,
+		.chip_select	= 1,
+		.mode		= SPI_MODE_3,
+		.platform_data	= &eeprom_25lc010,
+	},
+};
+
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= GPIO_PIN_PA(26),
+		.wp_pin		= GPIO_PIN_PA(27),
+	},
+};
+
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+	int i;
+
+	i = tag->u.ethernet.mac_index;
+	if (i < ARRAY_SIZE(hw_addr))
+		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+		       sizeof(hw_addr[i].addr));
+
+	return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	const u8 *addr;
+	void __iomem *regs;
+	struct clk *pclk;
+
+	if (!res)
+		return;
+	if (pdev->id >= ARRAY_SIZE(hw_addr))
+		return;
+
+	addr = hw_addr[pdev->id].addr;
+	if (!is_valid_ether_addr(addr))
+		return;
+
+	/*
+	 * Since this is board-specific code, we'll cheat and use the
+	 * physical address directly as we happen to know that it's
+	 * the same as the virtual address.
+	 */
+	regs = (void __iomem __force *)res->start;
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (!pclk)
+		return;
+
+	clk_enable(pclk);
+	__raw_writel((addr[3] << 24) | (addr[2] << 16)
+		     | (addr[1] << 8) | addr[0], regs + 0x98);
+	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+	clk_disable(pclk);
+	clk_put(pclk);
+}
+
+void __init setup_board(void)
+{
+	at32_map_usart(0, 0);	/* USART 0: /dev/ttyS0 (TTL --> Altera) */
+	at32_map_usart(1, 1);	/* USART 1: /dev/ttyS1 (RS232) */
+	at32_map_usart(2, 2);	/* USART 2: /dev/ttyS2 (RS485) */
+	at32_map_usart(3, 3);	/* USART 3: /dev/ttyS3 (RS422 Multidrop) */
+}
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= GPIO_PIN_PA(6),
+	.scl_pin		= GPIO_PIN_PA(7),
+	.sda_is_open_drain	= 1,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,	/* close to 100 kHz */
+};
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+	.platform_data	= &i2c_gpio_data,
+	},
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+};
+
+static int __init mimc200_init(void)
+{
+	/*
+	 * MIMC200 uses 16-bit SDRAM interface, so we don't need to
+	 * reserve any pins for it.
+	 */
+
+	at32_add_system_devices();
+
+	at32_add_device_usart(0);
+	at32_add_device_usart(1);
+	at32_add_device_usart(2);
+	at32_add_device_usart(3);
+
+	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+
+	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+	at32_add_device_mci(0, &mci0_data);
+	at32_add_device_usba(0, NULL);
+
+	at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
+	at32_select_gpio(i2c_gpio_data.sda_pin,
+		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+	at32_select_gpio(i2c_gpio_data.scl_pin,
+		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+	platform_device_register(&i2c_gpio_device);
+	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
+
+	at32_add_device_lcdc(0, &mimc200_lcdc_data,
+			     fbmem_start, fbmem_size, 1);
+
+	return 0;
+}
+postcore_initcall(mimc200_init);
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
new file mode 100644
index 0000000..b0572d2
--- /dev/null
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -0,0 +1,1264 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25.6
+# Wed Jun 18 16:06:32 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+CONFIG_BOARD_ATNGW100=y
+CONFIG_BOARD_ATNGW100_EVKLCD10X=y
+CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA=y
+# CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA is not set
+# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
+CONFIG_BOARD_ATNGW100_I2C_GPIO=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+CONFIG_DW_DMAC=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x80000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# AVR32 devices
+#
+CONFIG_SND_ATMEL_AC97=m
+
+#
+# SPI devices
+#
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
new file mode 100644
index 0000000..c5b898d
--- /dev/null
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -0,0 +1,1264 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25.6
+# Wed Jun 18 16:09:32 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+CONFIG_BOARD_ATNGW100=y
+CONFIG_BOARD_ATNGW100_EVKLCD10X=y
+# CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA is not set
+CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA=y
+# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
+CONFIG_BOARD_ATNGW100_I2C_GPIO=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+CONFIG_DW_DMAC=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x80000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# AVR32 devices
+#
+CONFIG_SND_ATMEL_AC97=m
+
+#
+# SPI devices
+#
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
new file mode 100644
index 0000000..e2bd998
--- /dev/null
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -0,0 +1,1235 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc8
+# Tue Oct 14 13:20:41 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+# CONFIG_BOARD_ATNGW100 is not set
+CONFIG_BOARD_FAVR_32=y
+# CONFIG_BOARD_MIMC200 is not set
+CONFIG_BOARD_FAVR32_ABDAC_RATE=44100
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
+CONFIG_BACKLIGHT_ATMEL_PWM=m
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+# CONFIG_SND is not set
+CONFIG_SOUND_PRIME=m
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
new file mode 100644
index 0000000..981e4f8
--- /dev/null
+++ b/arch/avr32/configs/mimc200_defconfig
@@ -0,0 +1,1109 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc8
+# Mon Oct 13 15:46:53 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+# CONFIG_BOARD_ATNGW100 is not set
+CONFIG_BOARD_MIMC200=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x80000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS28CM00 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=y
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+CONFIG_MMC_TEST=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+CONFIG_RTC_DRV_DS1390=y
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT32AP700X is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/avr32/include/asm/a.out.h b/arch/avr32/include/asm/a.out.h
deleted file mode 100644
index e46375a3..0000000
--- a/arch/avr32/include/asm/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_AVR32_A_OUT_H
-#define __ASM_AVR32_A_OUT_H
-
-struct exec
-{
-  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
-  unsigned a_text;		/* length of text, in bytes */
-  unsigned a_data;		/* length of data, in bytes */
-  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-  unsigned a_syms;		/* length of symbol table data in file, in bytes */
-  unsigned a_entry;		/* start address */
-  unsigned a_trsize;		/* length of relocation info for text, in bytes */
-  unsigned a_drsize;		/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif /* __ASM_AVR32_A_OUT_H */
diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h
index c2ea6e1..59f3fad 100644
--- a/arch/avr32/include/asm/atmel-mci.h
+++ b/arch/avr32/include/asm/atmel-mci.h
@@ -1,9 +1,39 @@
 #ifndef __ASM_AVR32_ATMEL_MCI_H
 #define __ASM_AVR32_ATMEL_MCI_H
 
-struct mci_platform_data {
+#define ATMEL_MCI_MAX_NR_SLOTS	2
+
+struct dma_slave;
+
+/**
+ * struct mci_slot_pdata - board-specific per-slot configuration
+ * @bus_width: Number of data lines wired up the slot
+ * @detect_pin: GPIO pin wired to the card detect switch
+ * @wp_pin: GPIO pin wired to the write protect sensor
+ *
+ * If a given slot is not present on the board, @bus_width should be
+ * set to 0. The other fields are ignored in this case.
+ *
+ * Any pins that aren't available should be set to a negative value.
+ *
+ * Note that support for multiple slots is experimental -- some cards
+ * might get upset if we don't get the clock management exactly right.
+ * But in most cases, it should work just fine.
+ */
+struct mci_slot_pdata {
+	unsigned int		bus_width;
 	int			detect_pin;
 	int			wp_pin;
 };
 
+/**
+ * struct mci_platform_data - board-specific MMC/SDcard configuration
+ * @dma_slave: DMA slave interface to use in data transfers, or NULL.
+ * @slot: Per-slot configuration data.
+ */
+struct mci_platform_data {
+	struct dma_slave	*dma_slave;
+	struct mci_slot_pdata	slot[ATMEL_MCI_MAX_NR_SLOTS];
+};
+
 #endif /* __ASM_AVR32_ATMEL_MCI_H */
diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h
index d77b48b..8e3af02 100644
--- a/arch/avr32/include/asm/byteorder.h
+++ b/arch/avr32/include/asm/byteorder.h
@@ -7,6 +7,9 @@
 #include <asm/types.h>
 #include <linux/compiler.h>
 
+#define __BIG_ENDIAN
+#define __SWAB_64_THRU_32__
+
 #ifdef __CHECKER__
 extern unsigned long __builtin_bswap_32(unsigned long x);
 extern unsigned short __builtin_bswap_16(unsigned short x);
@@ -17,15 +20,18 @@ extern unsigned short __builtin_bswap_16(unsigned short x);
  * the result.
  */
 #if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
-#define __arch__swab32(x) __builtin_bswap_32(x)
-#define __arch__swab16(x) __builtin_bswap_16(x)
-#endif
+static inline __attribute_const__ __u16 __arch_swab16(__u16 val)
+{
+	return __builtin_bswap_16(val);
+}
+#define __arch_swab16 __arch_swab16
 
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+	return __builtin_bswap_32(val);
+}
+#define __arch_swab32 __arch_swab32
 #endif
 
-#include <linux/byteorder/big_endian.h>
-
+#include <linux/byteorder.h>
 #endif /* __ASM_AVR32_BYTEORDER_H */
diff --git a/arch/avr32/include/asm/elf.h b/arch/avr32/include/asm/elf.h
index 64ce40e..d5d1d41 100644
--- a/arch/avr32/include/asm/elf.h
+++ b/arch/avr32/include/asm/elf.h
@@ -103,6 +103,6 @@ typedef struct user_fpu_struct elf_fpregset_t;
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
 
 #endif /* __ASM_AVR32_ELF_H */
diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
index a520f77..22c97ef 100644
--- a/arch/avr32/include/asm/io.h
+++ b/arch/avr32/include/asm/io.h
@@ -160,6 +160,14 @@ BUILDIO_IOPORT(l, u32)
 #define readw_relaxed			readw
 #define readl_relaxed			readl
 
+#define readb_be			__raw_readb
+#define readw_be			__raw_readw
+#define readl_be			__raw_readl
+
+#define writeb_be			__raw_writeb
+#define writew_be			__raw_writew
+#define writel_be			__raw_writel
+
 #define __BUILD_MEMORY_STRING(bwl, type)				\
 static inline void writes##bwl(volatile void __iomem *addr,		\
 			       const void *data, unsigned int count)	\
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index 294b25f..4442f8d 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -96,6 +96,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_MEMDIE		(1 << TIF_MEMDIE)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
 
 /* Note: The masks below must never span more than 16 bits! */
 
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 2c08ac9..134d530 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/kallsyms.h>
 #include <linux/fs.h>
+#include <linux/pm.h>
 #include <linux/ptrace.h>
 #include <linux/reboot.h>
 #include <linux/tick.h>
@@ -20,7 +21,7 @@
 
 #include <mach/pm.h>
 
-void (*pm_power_off)(void) = NULL;
+void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
 /*
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index d8e623c..5c70839 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -283,6 +283,25 @@ static int __init early_parse_fbmem(char *p)
 }
 early_param("fbmem", early_parse_fbmem);
 
+/*
+ * Pick out the memory size.  We look for mem=size@start,
+ * where start and size are "size[KkMmGg]"
+ */
+static int __init early_mem(char *p)
+{
+	resource_size_t size, start;
+
+	start = system_ram->start;
+	size  = memparse(p, &p);
+	if (*p == '@')
+		start = memparse(p + 1, &p);
+
+	system_ram->start = start;
+	system_ram->end = system_ram->start + size - 1;
+	return 0;
+}
+early_param("mem", early_mem);
+
 static int __init parse_tag_core(struct tag *tag)
 {
 	if (tag->hdr.size > 2) {
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index e01dbe4..0c6e02f 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -82,8 +82,9 @@ static struct platform_device _name##_id##_device = {		\
 	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
 }
 
-#define select_peripheral(pin, periph, flags)			\
-	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+#define select_peripheral(port, pin_mask, periph, flags)	\
+	at32_select_periph(GPIO_##port##_BASE, pin_mask,	\
+			   GPIO_##periph, flags)
 
 #define DEV_CLK(_name, devname, bus, _index)			\
 static struct clk devname##_##_name = {				\
@@ -812,7 +813,7 @@ static struct resource pio4_resource[] = {
 DEFINE_DEV(pio, 4);
 DEV_CLK(mck, pio4, pba, 14);
 
-void __init at32_add_system_devices(void)
+static int __init system_device_init(void)
 {
 	platform_device_register(&at32_pm0_device);
 	platform_device_register(&at32_intc0_device);
@@ -831,7 +832,10 @@ void __init at32_add_system_devices(void)
 	platform_device_register(&pio2_device);
 	platform_device_register(&pio3_device);
 	platform_device_register(&pio4_device);
+
+	return 0;
 }
+core_initcall(system_device_init);
 
 /* --------------------------------------------------------------------
  *  PSIF
@@ -871,6 +875,7 @@ static struct clk atmel_psif1_pclk = {
 struct platform_device *__init at32_add_device_psif(unsigned int id)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (!(id == 0 || id == 1))
 		return NULL;
@@ -881,20 +886,22 @@ struct platform_device *__init at32_add_device_psif(unsigned int id)
 
 	switch (id) {
 	case 0:
+		pin_mask  = (1 << 8) | (1 << 9); /* CLOCK & DATA */
+
 		if (platform_device_add_resources(pdev, atmel_psif0_resource,
 					ARRAY_SIZE(atmel_psif0_resource)))
 			goto err_add_resources;
 		atmel_psif0_pclk.dev = &pdev->dev;
-		select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
-		select_peripheral(PA(9), PERIPH_A, 0); /* DATA  */
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
 		break;
 	case 1:
+		pin_mask  = (1 << 11) | (1 << 12); /* CLOCK & DATA */
+
 		if (platform_device_add_resources(pdev, atmel_psif1_resource,
 					ARRAY_SIZE(atmel_psif1_resource)))
 			goto err_add_resources;
 		atmel_psif1_pclk.dev = &pdev->dev;
-		select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
-		select_peripheral(PB(12), PERIPH_A, 0); /* DATA  */
+		select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
 		break;
 	default:
 		return NULL;
@@ -958,26 +965,30 @@ DEV_CLK(usart, atmel_usart3, pba, 6);
 
 static inline void configure_usart0_pins(void)
 {
-	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
+
+	select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
 }
 
 static inline void configure_usart1_pins(void)
 {
-	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
-	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
+
+	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
 }
 
 static inline void configure_usart2_pins(void)
 {
-	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
 }
 
 static inline void configure_usart3_pins(void)
 {
-	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
 }
 
 static struct platform_device *__initdata at32_usarts[4];
@@ -1057,59 +1068,73 @@ struct platform_device *__init
 at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	switch (id) {
 	case 0:
 		pdev = &macb0_device;
 
-		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
-		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
-		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
-		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
-		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
-		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
-		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
-		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
-		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
-		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
+		pin_mask  = (1 << 3);	/* TXD0 */
+		pin_mask |= (1 << 4);	/* TXD1 */
+		pin_mask |= (1 << 7);	/* TXEN */
+		pin_mask |= (1 << 8);	/* TXCK */
+		pin_mask |= (1 << 9);	/* RXD0 */
+		pin_mask |= (1 << 10);	/* RXD1 */
+		pin_mask |= (1 << 13);	/* RXER */
+		pin_mask |= (1 << 15);	/* RXDV */
+		pin_mask |= (1 << 16);	/* MDC  */
+		pin_mask |= (1 << 17);	/* MDIO */
 
 		if (!data->is_rmii) {
-			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
-			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
-			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
-			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
-			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
-			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
-			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
-			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
-			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
+			pin_mask |= (1 << 0);	/* COL  */
+			pin_mask |= (1 << 1);	/* CRS  */
+			pin_mask |= (1 << 2);	/* TXER */
+			pin_mask |= (1 << 5);	/* TXD2 */
+			pin_mask |= (1 << 6);	/* TXD3 */
+			pin_mask |= (1 << 11);	/* RXD2 */
+			pin_mask |= (1 << 12);	/* RXD3 */
+			pin_mask |= (1 << 14);	/* RXCK */
+#ifndef CONFIG_BOARD_MIMC200
+			pin_mask |= (1 << 18);	/* SPD  */
+#endif
 		}
+
+		select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
+
 		break;
 
 	case 1:
 		pdev = &macb1_device;
 
-		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
-		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
-		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
-		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
-		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
-		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
-		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
-		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
-		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
-		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
+		pin_mask  = (1 << 13);	/* TXD0 */
+		pin_mask |= (1 << 14);	/* TXD1 */
+		pin_mask |= (1 << 11);	/* TXEN */
+		pin_mask |= (1 << 12);	/* TXCK */
+		pin_mask |= (1 << 10);	/* RXD0 */
+		pin_mask |= (1 << 6);	/* RXD1 */
+		pin_mask |= (1 << 5);	/* RXER */
+		pin_mask |= (1 << 4);	/* RXDV */
+		pin_mask |= (1 << 3);	/* MDC  */
+		pin_mask |= (1 << 2);	/* MDIO */
+
+#ifndef CONFIG_BOARD_MIMC200
+		if (!data->is_rmii)
+			pin_mask |= (1 << 15);	/* SPD  */
+#endif
+
+		select_peripheral(PIOD, pin_mask, PERIPH_B, 0);
 
 		if (!data->is_rmii) {
-			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
-			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
-			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
-			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
-			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
-			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
-			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
-			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
-			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
+			pin_mask  = (1 << 19);	/* COL  */
+			pin_mask |= (1 << 23);	/* CRS  */
+			pin_mask |= (1 << 26);	/* TXER */
+			pin_mask |= (1 << 27);	/* TXD2 */
+			pin_mask |= (1 << 28);	/* TXD3 */
+			pin_mask |= (1 << 29);	/* RXD2 */
+			pin_mask |= (1 << 30);	/* RXD3 */
+			pin_mask |= (1 << 24);	/* RXCK */
+
+			select_peripheral(PIOC, pin_mask, PERIPH_B, 0);
 		}
 		break;
 
@@ -1177,23 +1202,28 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
 		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	switch (id) {
 	case 0:
 		pdev = &atmel_spi0_device;
+		pin_mask  = (1 << 1) | (1 << 2);	/* MOSI & SCK */
+
 		/* pullup MISO so a level is always defined */
-		select_peripheral(PA(0),  PERIPH_A, AT32_GPIOF_PULLUP);
-		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
-		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
+		select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP);
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
 		at32_spi_setup_slaves(0, b, n, spi0_pins);
 		break;
 
 	case 1:
 		pdev = &atmel_spi1_device;
+		pin_mask  = (1 << 1) | (1 << 5);	/* MOSI */
+
 		/* pullup MISO so a level is always defined */
-		select_peripheral(PB(0),  PERIPH_B, AT32_GPIOF_PULLUP);
-		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
-		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
+		select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP);
+		select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+
 		at32_spi_setup_slaves(1, b, n, spi1_pins);
 		break;
 
@@ -1226,6 +1256,7 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
 						    unsigned int n)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (id != 0)
 		return NULL;
@@ -1238,8 +1269,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
 				ARRAY_SIZE(atmel_twi0_resource)))
 		goto err_add_resources;
 
-	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
-	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
+	pin_mask  = (1 << 6) | (1 << 7);	/* SDA & SDL */
+
+	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
 
 	atmel_twi0_pclk.dev = &pdev->dev;
 
@@ -1272,10 +1304,16 @@ static struct clk atmel_mci0_pclk = {
 struct platform_device *__init
 at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
-	struct mci_platform_data	_data;
 	struct platform_device		*pdev;
+	struct dw_dma_slave		*dws;
+	u32				pioa_mask;
+	u32				piob_mask;
 
-	if (id != 0)
+	if (id != 0 || !data)
+		return NULL;
+
+	/* Must have at least one usable slot */
+	if (!data->slot[0].bus_width && !data->slot[1].bus_width)
 		return NULL;
 
 	pdev = platform_device_alloc("atmel_mci", id);
@@ -1286,28 +1324,80 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 				ARRAY_SIZE(atmel_mci0_resource)))
 		goto fail;
 
-	if (!data) {
-		data = &_data;
-		memset(data, -1, sizeof(struct mci_platform_data));
-		data->detect_pin = GPIO_PIN_NONE;
-		data->wp_pin = GPIO_PIN_NONE;
-	}
+	if (data->dma_slave)
+		dws = kmemdup(to_dw_dma_slave(data->dma_slave),
+				sizeof(struct dw_dma_slave), GFP_KERNEL);
+	else
+		dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
+
+	dws->slave.dev = &pdev->dev;
+	dws->slave.dma_dev = &dw_dmac0_device.dev;
+	dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT;
+	dws->cfg_hi = (DWC_CFGH_SRC_PER(0)
+				| DWC_CFGH_DST_PER(1));
+	dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
+				| DWC_CFGL_HS_SRC_POL);
+
+	data->dma_slave = &dws->slave;
 
 	if (platform_device_add_data(pdev, data,
 				sizeof(struct mci_platform_data)))
 		goto fail;
 
-	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
-	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
-	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
-	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
-	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
-	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
+	/* CLK line is common to both slots */
+	pioa_mask = 1 << 10;
 
-	if (gpio_is_valid(data->detect_pin))
-		at32_select_gpio(data->detect_pin, 0);
-	if (gpio_is_valid(data->wp_pin))
-		at32_select_gpio(data->wp_pin, 0);
+	switch (data->slot[0].bus_width) {
+	case 4:
+		pioa_mask |= 1 << 13;		/* DATA1 */
+		pioa_mask |= 1 << 14;		/* DATA2 */
+		pioa_mask |= 1 << 15;		/* DATA3 */
+		/* fall through */
+	case 1:
+		pioa_mask |= 1 << 11;		/* CMD	 */
+		pioa_mask |= 1 << 12;		/* DATA0 */
+
+		if (gpio_is_valid(data->slot[0].detect_pin))
+			at32_select_gpio(data->slot[0].detect_pin, 0);
+		if (gpio_is_valid(data->slot[0].wp_pin))
+			at32_select_gpio(data->slot[0].wp_pin, 0);
+		break;
+	case 0:
+		/* Slot is unused */
+		break;
+	default:
+		goto fail;
+	}
+
+	select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
+	piob_mask = 0;
+
+	switch (data->slot[1].bus_width) {
+	case 4:
+		piob_mask |= 1 <<  8;		/* DATA1 */
+		piob_mask |= 1 <<  9;		/* DATA2 */
+		piob_mask |= 1 << 10;		/* DATA3 */
+		/* fall through */
+	case 1:
+		piob_mask |= 1 <<  6;		/* CMD	 */
+		piob_mask |= 1 <<  7;		/* DATA0 */
+		select_peripheral(PIOB, piob_mask, PERIPH_B, 0);
+
+		if (gpio_is_valid(data->slot[1].detect_pin))
+			at32_select_gpio(data->slot[1].detect_pin, 0);
+		if (gpio_is_valid(data->slot[1].wp_pin))
+			at32_select_gpio(data->slot[1].wp_pin, 0);
+		break;
+	case 0:
+		/* Slot is unused */
+		break;
+	default:
+		if (!data->slot[0].bus_width)
+			goto fail;
+
+		data->slot[1].bus_width = 0;
+		break;
+	}
 
 	atmel_mci0_pclk.dev = &pdev->dev;
 
@@ -1353,13 +1443,14 @@ static struct clk atmel_lcdfb0_pixclk = {
 struct platform_device *__init
 at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 		     unsigned long fbmem_start, unsigned long fbmem_len,
-		     unsigned int pin_config)
+		     u64 pin_mask)
 {
 	struct platform_device *pdev;
 	struct atmel_lcdfb_info *info;
 	struct fb_monspecs *monspecs;
 	struct fb_videomode *modedb;
 	unsigned int modedb_size;
+	u32 portc_mask, portd_mask, porte_mask;
 
 	/*
 	 * Do a deep copy of the fb data, monspecs and modedb. Make
@@ -1381,76 +1472,21 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 	case 0:
 		pdev = &atmel_lcdfb0_device;
 
-		switch (pin_config) {
-		case 0:
-			select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
-			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-			select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
-			select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
-			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-			select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
-			select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
-			select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
-			select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
-			select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
-			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-			select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
-			select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
-			select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
-			select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
-			select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
-			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-			select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
-			select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
-			select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
-			select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
-			select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
-			select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
-			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
-			break;
-		case 1:
-			select_peripheral(PE(0),  PERIPH_B, 0);	/* CC	  */
-			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-			select_peripheral(PE(1),  PERIPH_B, 0);	/* DVAL	  */
-			select_peripheral(PE(2),  PERIPH_B, 0);	/* MODE	  */
-			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-			select_peripheral(PE(3),  PERIPH_B, 0);	/* DATA0  */
-			select_peripheral(PE(4),  PERIPH_B, 0);	/* DATA1  */
-			select_peripheral(PE(5),  PERIPH_B, 0);	/* DATA2  */
-			select_peripheral(PE(6),  PERIPH_B, 0);	/* DATA3  */
-			select_peripheral(PE(7),  PERIPH_B, 0);	/* DATA4  */
-			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-			select_peripheral(PE(8),  PERIPH_B, 0);	/* DATA8  */
-			select_peripheral(PE(9),  PERIPH_B, 0);	/* DATA9  */
-			select_peripheral(PE(10), PERIPH_B, 0);	/* DATA10 */
-			select_peripheral(PE(11), PERIPH_B, 0);	/* DATA11 */
-			select_peripheral(PE(12), PERIPH_B, 0);	/* DATA12 */
-			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-			select_peripheral(PE(13), PERIPH_B, 0);	/* DATA16 */
-			select_peripheral(PE(14), PERIPH_B, 0);	/* DATA17 */
-			select_peripheral(PE(15), PERIPH_B, 0);	/* DATA18 */
-			select_peripheral(PE(16), PERIPH_B, 0);	/* DATA19 */
-			select_peripheral(PE(17), PERIPH_B, 0);	/* DATA20 */
-			select_peripheral(PE(18), PERIPH_B, 0);	/* DATA21 */
-			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
-			break;
-		default:
-			goto err_invalid_id;
-		}
+		if (pin_mask == 0ULL)
+			/* Default to "full" lcdc control signals and 24bit */
+			pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL;
+
+		/* LCDC on port C */
+		portc_mask = pin_mask & 0xfff80000;
+		select_peripheral(PIOC, portc_mask, PERIPH_A, 0);
+
+		/* LCDC on port D */
+		portd_mask = pin_mask & 0x0003ffff;
+		select_peripheral(PIOD, portd_mask, PERIPH_A, 0);
+
+		/* LCDC on port E */
+		porte_mask = (pin_mask >> 32) & 0x0007ffff;
+		select_peripheral(PIOE, porte_mask, PERIPH_B, 0);
 
 		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
 		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
@@ -1499,6 +1535,7 @@ static struct clk atmel_pwm0_mck = {
 struct platform_device *__init at32_add_device_pwm(u32 mask)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (!mask)
 		return NULL;
@@ -1514,14 +1551,21 @@ struct platform_device *__init at32_add_device_pwm(u32 mask)
 	if (platform_device_add_data(pdev, &mask, sizeof(mask)))
 		goto out_free_pdev;
 
+	pin_mask = 0;
 	if (mask & (1 << 0))
-		select_peripheral(PA(28), PERIPH_A, 0);
+		pin_mask |= (1 << 28);
 	if (mask & (1 << 1))
-		select_peripheral(PA(29), PERIPH_A, 0);
+		pin_mask |= (1 << 29);
+	if (pin_mask > 0)
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
+	pin_mask = 0;
 	if (mask & (1 << 2))
-		select_peripheral(PA(21), PERIPH_B, 0);
+		pin_mask |= (1 << 21);
 	if (mask & (1 << 3))
-		select_peripheral(PA(22), PERIPH_B, 0);
+		pin_mask |= (1 << 22);
+	if (pin_mask > 0)
+		select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
 
 	atmel_pwm0_mck.dev = &pdev->dev;
 
@@ -1562,52 +1606,65 @@ struct platform_device *__init
 at32_add_device_ssc(unsigned int id, unsigned int flags)
 {
 	struct platform_device *pdev;
+	u32 pin_mask = 0;
 
 	switch (id) {
 	case 0:
 		pdev = &ssc0_device;
 		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
+			pin_mask |= (1 << 21);	/* RF */
 		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
+			pin_mask |= (1 << 22);	/* RK */
 		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
+			pin_mask |= (1 << 23);	/* TK */
 		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
+			pin_mask |= (1 << 24);	/* TF */
 		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
+			pin_mask |= (1 << 25);	/* TD */
 		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
+			pin_mask |= (1 << 26);	/* RD */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
 		break;
 	case 1:
 		pdev = &ssc1_device;
 		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
+			pin_mask |= (1 << 0);	/* RF */
 		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
+			pin_mask |= (1 << 1);	/* RK */
 		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
+			pin_mask |= (1 << 2);	/* TK */
 		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
+			pin_mask |= (1 << 3);	/* TF */
 		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
+			pin_mask |= (1 << 4);	/* TD */
 		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
+			pin_mask |= (1 << 5);	/* RD */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+
 		break;
 	case 2:
 		pdev = &ssc2_device;
 		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
+			pin_mask |= (1 << 13);	/* TD */
 		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
+			pin_mask |= (1 << 14);	/* RD */
 		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
+			pin_mask |= (1 << 15);	/* TK */
 		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
+			pin_mask |= (1 << 16);	/* TF */
 		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
+			pin_mask |= (1 << 17);	/* RF */
 		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
+			pin_mask |= (1 << 18);	/* RK */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
+
 		break;
 	default:
 		return NULL;
@@ -1745,14 +1802,15 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 		unsigned int cs, unsigned int extint)
 {
 	static unsigned int extint_pin_map[4] __initdata = {
-		GPIO_PIN_PB(25),
-		GPIO_PIN_PB(26),
-		GPIO_PIN_PB(27),
-		GPIO_PIN_PB(28),
+		(1 << 25),
+		(1 << 26),
+		(1 << 27),
+		(1 << 28),
 	};
 	static bool common_pins_initialized __initdata = false;
 	unsigned int extint_pin;
 	int ret;
+	u32 pin_mask;
 
 	if (extint >= ARRAY_SIZE(extint_pin_map))
 		return -EINVAL;
@@ -1766,7 +1824,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 		if (ret)
 			return ret;
 
-		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
+		/* NCS4   -> OE_N  */
+		select_peripheral(PIOE, (1 << 21), PERIPH_A, 0);
 		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
 		break;
 	case 5:
@@ -1776,7 +1835,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 		if (ret)
 			return ret;
 
-		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
+		/* NCS5   -> OE_N  */
+		select_peripheral(PIOE, (1 << 22), PERIPH_A, 0);
 		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
 		break;
 	default:
@@ -1784,14 +1844,17 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 	}
 
 	if (!common_pins_initialized) {
-		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
-		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
-		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
-		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
+		pin_mask  = (1 << 19);	/* CFCE1  -> CS0_N */
+		pin_mask |= (1 << 20);	/* CFCE2  -> CS1_N */
+		pin_mask |= (1 << 23);	/* CFRNW  -> DIR   */
+		pin_mask |= (1 << 24);	/* NWAIT  <- IORDY */
+
+		select_peripheral(PIOE, pin_mask, PERIPH_A, 0);
+
 		common_pins_initialized = true;
 	}
 
-	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+	select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH);
 
 	pdev->resource[1].start = EIM_IRQ_BASE + extint;
 	pdev->resource[1].end = pdev->resource[1].start;
@@ -1930,6 +1993,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
 {
 	struct platform_device *pdev;
 	struct ac97c_platform_data _data;
+	u32 pin_mask;
 
 	if (id != 0)
 		return NULL;
@@ -1956,10 +2020,10 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
 				sizeof(struct ac97c_platform_data)))
 		goto fail;
 
-	select_peripheral(PB(20), PERIPH_B, 0);	/* SDO	*/
-	select_peripheral(PB(21), PERIPH_B, 0);	/* SYNC	*/
-	select_peripheral(PB(22), PERIPH_B, 0);	/* SCLK	*/
-	select_peripheral(PB(23), PERIPH_B, 0);	/* SDI	*/
+	pin_mask  = (1 << 20) | (1 << 21);	/* SDO & SYNC */
+	pin_mask |= (1 << 22) | (1 << 23);	/* SCLK & SDI */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
 
 	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
 	if (data->reset_pin != GPIO_PIN_NONE)
@@ -2001,6 +2065,7 @@ static struct clk abdac0_sample_clk = {
 struct platform_device *__init at32_add_device_abdac(unsigned int id)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (id != 0)
 		return NULL;
@@ -2013,10 +2078,10 @@ struct platform_device *__init at32_add_device_abdac(unsigned int id)
 				ARRAY_SIZE(abdac0_resource)))
 		goto err_add_resources;
 
-	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
-	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
-	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
-	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
+	pin_mask  = (1 << 20) | (1 << 22);	/* DATA1 & DATAN1 */
+	pin_mask |= (1 << 21) | (1 << 23);	/* DATA0 & DATAN0 */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
 
 	abdac0_pclk.dev = &pdev->dev;
 	abdac0_sample_clk.dev = &pdev->dev;
@@ -2073,7 +2138,7 @@ static struct clk gclk4 = {
 	.index		= 4,
 };
 
-struct clk *at32_clock_list[] = {
+static __initdata struct clk *init_clocks[] = {
 	&osc32k,
 	&osc0,
 	&osc1,
@@ -2137,7 +2202,6 @@ struct clk *at32_clock_list[] = {
 	&gclk3,
 	&gclk4,
 };
-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
 
 void __init setup_platform(void)
 {
@@ -2168,14 +2232,19 @@ void __init setup_platform(void)
 	genclk_init_parent(&abdac0_sample_clk);
 
 	/*
-	 * Turn on all clocks that have at least one user already, and
-	 * turn off everything else. We only do this for module
-	 * clocks, and even though it isn't particularly pretty to
-	 * check the address of the mode function, it should do the
-	 * trick...
+	 * Build initial dynamic clock list by registering all clocks
+	 * from the array.
+	 * At the same time, turn on all clocks that have at least one
+	 * user already, and turn off everything else. We only do this
+	 * for module clocks, and even though it isn't particularly
+	 * pretty to  check the address of the mode function, it should
+	 * do the trick...
 	 */
-	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
-		struct clk *clk = at32_clock_list[i];
+	for (i = 0; i < ARRAY_SIZE(init_clocks); i++) {
+		struct clk *clk = init_clocks[i];
+
+		/* first, register clock */
+		at32_clk_register(clk);
 
 		if (clk->users == 0)
 			continue;
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 6c27dda..138a00a 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -15,24 +15,40 @@
 #include <linux/err.h>
 #include <linux/device.h>
 #include <linux/string.h>
+#include <linux/list.h>
 
 #include <mach/chip.h>
 
 #include "clock.h"
 
+/* at32 clock list */
+static LIST_HEAD(at32_clock_list);
+
 static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(clk_list_lock);
+
+void at32_clk_register(struct clk *clk)
+{
+	spin_lock(&clk_list_lock);
+	/* add the new item to the end of the list */
+	list_add_tail(&clk->list, &at32_clock_list);
+	spin_unlock(&clk_list_lock);
+}
 
 struct clk *clk_get(struct device *dev, const char *id)
 {
-	int i;
+	struct clk *clk;
 
-	for (i = 0; i < at32_nr_clocks; i++) {
-		struct clk *clk = at32_clock_list[i];
+	spin_lock(&clk_list_lock);
 
-		if (clk->dev == dev && strcmp(id, clk->name) == 0)
+	list_for_each_entry(clk, &at32_clock_list, list) {
+		if (clk->dev == dev && strcmp(id, clk->name) == 0) {
+			spin_unlock(&clk_list_lock);
 			return clk;
+		}
 	}
 
+	spin_unlock(&clk_list_lock);
 	return ERR_PTR(-ENOENT);
 }
 EXPORT_SYMBOL(clk_get);
@@ -203,8 +219,8 @@ dump_clock(struct clk *parent, struct clkinf *r)
 
 	/* cost of this scan is small, but not linear... */
 	r->nest = nest + NEST_DELTA;
-	for (i = 3; i < at32_nr_clocks; i++) {
-		clk = at32_clock_list[i];
+
+	list_for_each_entry(clk, &at32_clock_list, list) {
 		if (clk->parent == parent)
 			dump_clock(clk, r);
 	}
@@ -215,6 +231,7 @@ static int clk_show(struct seq_file *s, void *unused)
 {
 	struct clkinf	r;
 	int		i;
+	struct clk 	*clk;
 
 	/* show all the power manager registers */
 	seq_printf(s, "MCCTRL  = %8x\n", pm_readl(MCCTRL));
@@ -234,14 +251,25 @@ static int clk_show(struct seq_file *s, void *unused)
 
 	seq_printf(s, "\n");
 
-	/* show clock tree as derived from the three oscillators
-	 * we "know" are at the head of the list
-	 */
 	r.s = s;
 	r.nest = 0;
-	dump_clock(at32_clock_list[0], &r);
-	dump_clock(at32_clock_list[1], &r);
-	dump_clock(at32_clock_list[2], &r);
+	/* protected from changes on the list while dumping */
+	spin_lock(&clk_list_lock);
+
+	/* show clock tree as derived from the three oscillators */
+	clk = clk_get(NULL, "osc32k");
+	dump_clock(clk, &r);
+	clk_put(clk);
+
+	clk = clk_get(NULL, "osc0");
+	dump_clock(clk, &r);
+	clk_put(clk);
+
+	clk = clk_get(NULL, "osc1");
+	dump_clock(clk, &r);
+	clk_put(clk);
+
+	spin_unlock(&clk_list_lock);
 
 	return 0;
 }
diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h
index bb8e1f2..623bf0e 100644
--- a/arch/avr32/mach-at32ap/clock.h
+++ b/arch/avr32/mach-at32ap/clock.h
@@ -12,8 +12,13 @@
  * published by the Free Software Foundation.
  */
 #include <linux/clk.h>
+#include <linux/list.h>
+
+
+void at32_clk_register(struct clk *clk);
 
 struct clk {
+	struct list_head list;		/* linking element */
 	const char	*name;		/* Clock name/function */
 	struct device	*dev;		/* Device the clock is used by */
 	struct clk	*parent;	/* Parent clock, if any */
@@ -25,6 +30,3 @@ struct clk {
 	u16		users;		/* Enabled if non-zero */
 	u16		index;		/* Sibling index */
 };
-
-extern struct clk *at32_clock_list[];
-extern unsigned int at32_nr_clocks;
diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
index 5dd8d25..024c586 100644
--- a/arch/avr32/mach-at32ap/cpufreq.c
+++ b/arch/avr32/mach-at32ap/cpufreq.c
@@ -40,6 +40,9 @@ static unsigned int at32_get_speed(unsigned int cpu)
 	return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
 }
 
+static unsigned int	ref_freq;
+static unsigned long	loops_per_jiffy_ref;
+
 static int at32_set_target(struct cpufreq_policy *policy,
 			  unsigned int target_freq,
 			  unsigned int relation)
@@ -61,8 +64,19 @@ static int at32_set_target(struct cpufreq_policy *policy,
 	freqs.cpu = 0;
 	freqs.flags = 0;
 
+	if (!ref_freq) {
+		ref_freq = freqs.old;
+		loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy;
+	}
+
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	if (freqs.old < freqs.new)
+		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
+				loops_per_jiffy_ref, ref_freq, freqs.new);
 	clk_set_rate(cpuclk, freq);
+	if (freqs.new < freqs.old)
+		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
+				loops_per_jiffy_ref, ref_freq, freqs.new);
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	pr_debug("cpufreq: set frequency %lu Hz\n", freq);
@@ -87,7 +101,6 @@ static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy)
 	policy->cur = at32_get_speed(0);
 	policy->min = policy->cpuinfo.min_freq;
 	policy->max = policy->cpuinfo.max_freq;
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 
 	printk("cpufreq: AT32AP CPU frequency driver\n");
 
diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
index c36a6d5..310477b 100644
--- a/arch/avr32/mach-at32ap/extint.c
+++ b/arch/avr32/mach-at32ap/extint.c
@@ -191,7 +191,7 @@ static int __init eic_probe(struct platform_device *pdev)
 	struct eic *eic;
 	struct resource *regs;
 	unsigned int i;
-	unsigned int nr_irqs;
+	unsigned int nr_of_irqs;
 	unsigned int int_irq;
 	int ret;
 	u32 pattern;
@@ -224,7 +224,7 @@ static int __init eic_probe(struct platform_device *pdev)
 	eic_writel(eic, IDR, ~0UL);
 	eic_writel(eic, MODE, ~0UL);
 	pattern = eic_readl(eic, MODE);
-	nr_irqs = fls(pattern);
+	nr_of_irqs = fls(pattern);
 
 	/* Trigger on low level unless overridden by driver */
 	eic_writel(eic, EDGE, 0UL);
@@ -232,7 +232,7 @@ static int __init eic_probe(struct platform_device *pdev)
 
 	eic->chip = &eic_chip;
 
-	for (i = 0; i < nr_irqs; i++) {
+	for (i = 0; i < nr_of_irqs; i++) {
 		set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
 					 handle_level_irq);
 		set_irq_chip_data(eic->first_irq + i, eic);
@@ -256,7 +256,7 @@ static int __init eic_probe(struct platform_device *pdev)
 		 eic->regs, int_irq);
 	dev_info(&pdev->dev,
 		 "Handling %u external IRQs, starting with IRQ %u\n",
-		 nr_irqs, eic->first_irq);
+		 nr_of_irqs, eic->first_irq);
 
 	return 0;
 
diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
index 1e9852d..a77d372 100644
--- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
+++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
@@ -83,4 +83,132 @@
 #define HMATRIX_BASE	0xfff00800
 #define SDRAMC_BASE	0xfff03800
 
+/* LCDC on port C */
+#define ATMEL_LCDC_PC_CC	(1ULL << 19)
+#define ATMEL_LCDC_PC_HSYNC	(1ULL << 20)
+#define ATMEL_LCDC_PC_PCLK	(1ULL << 21)
+#define ATMEL_LCDC_PC_VSYNC	(1ULL << 22)
+#define ATMEL_LCDC_PC_DVAL	(1ULL << 23)
+#define ATMEL_LCDC_PC_MODE	(1ULL << 24)
+#define ATMEL_LCDC_PC_PWR	(1ULL << 25)
+#define ATMEL_LCDC_PC_DATA0	(1ULL << 26)
+#define ATMEL_LCDC_PC_DATA1	(1ULL << 27)
+#define ATMEL_LCDC_PC_DATA2	(1ULL << 28)
+#define ATMEL_LCDC_PC_DATA3	(1ULL << 29)
+#define ATMEL_LCDC_PC_DATA4	(1ULL << 30)
+#define ATMEL_LCDC_PC_DATA5	(1ULL << 31)
+
+/* LCDC on port D */
+#define ATMEL_LCDC_PD_DATA6	(1ULL << 0)
+#define ATMEL_LCDC_PD_DATA7	(1ULL << 1)
+#define ATMEL_LCDC_PD_DATA8	(1ULL << 2)
+#define ATMEL_LCDC_PD_DATA9	(1ULL << 3)
+#define ATMEL_LCDC_PD_DATA10	(1ULL << 4)
+#define ATMEL_LCDC_PD_DATA11	(1ULL << 5)
+#define ATMEL_LCDC_PD_DATA12	(1ULL << 6)
+#define ATMEL_LCDC_PD_DATA13	(1ULL << 7)
+#define ATMEL_LCDC_PD_DATA14	(1ULL << 8)
+#define ATMEL_LCDC_PD_DATA15	(1ULL << 9)
+#define ATMEL_LCDC_PD_DATA16	(1ULL << 10)
+#define ATMEL_LCDC_PD_DATA17	(1ULL << 11)
+#define ATMEL_LCDC_PD_DATA18	(1ULL << 12)
+#define ATMEL_LCDC_PD_DATA19	(1ULL << 13)
+#define ATMEL_LCDC_PD_DATA20	(1ULL << 14)
+#define ATMEL_LCDC_PD_DATA21	(1ULL << 15)
+#define ATMEL_LCDC_PD_DATA22	(1ULL << 16)
+#define ATMEL_LCDC_PD_DATA23	(1ULL << 17)
+
+/* LCDC on port E */
+#define ATMEL_LCDC_PE_CC	(1ULL << (32 + 0))
+#define ATMEL_LCDC_PE_DVAL	(1ULL << (32 + 1))
+#define ATMEL_LCDC_PE_MODE	(1ULL << (32 + 2))
+#define ATMEL_LCDC_PE_DATA0	(1ULL << (32 + 3))
+#define ATMEL_LCDC_PE_DATA1	(1ULL << (32 + 4))
+#define ATMEL_LCDC_PE_DATA2	(1ULL << (32 + 5))
+#define ATMEL_LCDC_PE_DATA3	(1ULL << (32 + 6))
+#define ATMEL_LCDC_PE_DATA4	(1ULL << (32 + 7))
+#define ATMEL_LCDC_PE_DATA8	(1ULL << (32 + 8))
+#define ATMEL_LCDC_PE_DATA9	(1ULL << (32 + 9))
+#define ATMEL_LCDC_PE_DATA10	(1ULL << (32 + 10))
+#define ATMEL_LCDC_PE_DATA11	(1ULL << (32 + 11))
+#define ATMEL_LCDC_PE_DATA12	(1ULL << (32 + 12))
+#define ATMEL_LCDC_PE_DATA16	(1ULL << (32 + 13))
+#define ATMEL_LCDC_PE_DATA17	(1ULL << (32 + 14))
+#define ATMEL_LCDC_PE_DATA18	(1ULL << (32 + 15))
+#define ATMEL_LCDC_PE_DATA19	(1ULL << (32 + 16))
+#define ATMEL_LCDC_PE_DATA20	(1ULL << (32 + 17))
+#define ATMEL_LCDC_PE_DATA21	(1ULL << (32 + 18))
+
+
+#define ATMEL_LCDC(PORT, PIN)	(ATMEL_LCDC_##PORT##_##PIN)
+
+
+#define ATMEL_LCDC_PRI_24B_DATA	(					\
+		ATMEL_LCDC(PC, DATA0)  | ATMEL_LCDC(PC, DATA1)  |	\
+		ATMEL_LCDC(PC, DATA2)  | ATMEL_LCDC(PC, DATA3)  |	\
+		ATMEL_LCDC(PC, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
+		ATMEL_LCDC(PD, DATA6)  | ATMEL_LCDC(PD, DATA7)  |	\
+		ATMEL_LCDC(PD, DATA8)  | ATMEL_LCDC(PD, DATA9)  |	\
+		ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) |	\
+		ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) |	\
+		ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) |	\
+		ATMEL_LCDC(PD, DATA16) | ATMEL_LCDC(PD, DATA17) |	\
+		ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) |	\
+		ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) |	\
+		ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
+
+#define ATMEL_LCDC_ALT_24B_DATA (					\
+		ATMEL_LCDC(PE, DATA0)  | ATMEL_LCDC(PE, DATA1)  |	\
+		ATMEL_LCDC(PE, DATA2)  | ATMEL_LCDC(PE, DATA3)  |	\
+		ATMEL_LCDC(PE, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
+		ATMEL_LCDC(PD, DATA6)  | ATMEL_LCDC(PD, DATA7)  |	\
+		ATMEL_LCDC(PE, DATA8)  | ATMEL_LCDC(PE, DATA9)  |	\
+		ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) |	\
+		ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) |	\
+		ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) |	\
+		ATMEL_LCDC(PE, DATA16) | ATMEL_LCDC(PE, DATA17) |	\
+		ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) |	\
+		ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) |	\
+		ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
+
+#define ATMEL_LCDC_PRI_15B_DATA (					\
+		ATMEL_LCDC(PC, DATA0)  | ATMEL_LCDC(PC, DATA1)  |	\
+		ATMEL_LCDC(PC, DATA2)  | ATMEL_LCDC(PC, DATA3)  |	\
+		ATMEL_LCDC(PC, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
+		ATMEL_LCDC(PD, DATA8)  | ATMEL_LCDC(PD, DATA9)  |	\
+		ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) |	\
+		ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA16) |	\
+		ATMEL_LCDC(PD, DATA17) | ATMEL_LCDC(PD, DATA18) |	\
+		ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20))
+
+#define ATMEL_LCDC_ALT_15B_DATA	(					\
+		ATMEL_LCDC(PE, DATA0)  | ATMEL_LCDC(PE, DATA1)  |	\
+		ATMEL_LCDC(PE, DATA2)  | ATMEL_LCDC(PE, DATA3)  |	\
+		ATMEL_LCDC(PE, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
+		ATMEL_LCDC(PE, DATA8)  | ATMEL_LCDC(PE, DATA9)  |	\
+		ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) |	\
+		ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PE, DATA16) |	\
+		ATMEL_LCDC(PE, DATA17) | ATMEL_LCDC(PE, DATA18) |	\
+		ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20))
+
+#define ATMEL_LCDC_PRI_CONTROL (					\
+		ATMEL_LCDC(PC, CC)   | ATMEL_LCDC(PC, DVAL) |		\
+		ATMEL_LCDC(PC, MODE) | ATMEL_LCDC(PC, PWR))
+
+#define ATMEL_LCDC_ALT_CONTROL (					\
+		ATMEL_LCDC(PE, CC)   | ATMEL_LCDC(PE, DVAL) |		\
+		ATMEL_LCDC(PE, MODE) | ATMEL_LCDC(PC, PWR))
+
+#define ATMEL_LCDC_CONTROL (						\
+		ATMEL_LCDC(PC, HSYNC) | ATMEL_LCDC(PC, VSYNC) |		\
+		ATMEL_LCDC(PC, PCLK))
+
+#define ATMEL_LCDC_PRI_24BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_24B_DATA)
+
+#define ATMEL_LCDC_ALT_24BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA)
+
+#define ATMEL_LCDC_PRI_15BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA)
+
+#define ATMEL_LCDC_ALT_15BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA)
+
 #endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index e60e907..aafaf7a 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -14,8 +14,14 @@
  */
 extern unsigned long at32_board_osc_rates[];
   
-/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
-void at32_add_system_devices(void);
+/*
+ * This used to add essential system devices, but this is now done
+ * automatically. Please don't use it in new board code.
+ */
+static inline void __deprecated at32_add_system_devices(void)
+{
+
+}
 
 #define ATMEL_MAX_UART	4
 extern struct platform_device *atmel_default_console_device;
@@ -43,7 +49,7 @@ struct atmel_lcdfb_info;
 struct platform_device *
 at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 		     unsigned long fbmem_start, unsigned long fbmem_len,
-		     unsigned int pin_config);
+		     u64 pin_mask);
 
 struct usba_platform_data;
 struct platform_device *
diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h
index 4ec6abc..22ea79b 100644
--- a/arch/avr32/mach-at32ap/include/mach/io.h
+++ b/arch/avr32/mach-at32ap/include/mach/io.h
@@ -1,8 +1,7 @@
 #ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
 #define __ASM_AVR32_ARCH_AT32AP_IO_H
 
-/* For "bizarre" halfword swapping */
-#include <linux/byteorder/swabb.h>
+#include <linux/swab.h>
 
 #if defined(CONFIG_AP700X_32_BIT_SMC)
 # define __swizzle_addr_b(addr)	(addr ^ 3UL)
diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h
index b1abe6b..21c7937 100644
--- a/arch/avr32/mach-at32ap/include/mach/portmux.h
+++ b/arch/avr32/mach-at32ap/include/mach/portmux.h
@@ -21,9 +21,10 @@
 #define AT32_GPIOF_DEGLITCH	0x00000008	/* (IN) Filter glitches */
 #define AT32_GPIOF_MULTIDRV	0x00000010	/* Enable multidriver option */
 
-void at32_select_periph(unsigned int pin, unsigned int periph,
-			unsigned long flags);
+void at32_select_periph(unsigned int port, unsigned int pin,
+			unsigned int periph, unsigned long flags);
 void at32_select_gpio(unsigned int pin, unsigned long flags);
+void at32_deselect_pin(unsigned int pin);
 void at32_reserve_pin(unsigned int pin);
 
 #endif /* __ASM_ARCH_PORTMUX_H__ */
diff --git a/arch/avr32/mach-at32ap/pdc.c b/arch/avr32/mach-at32ap/pdc.c
index 1040bda..61ab15a 100644
--- a/arch/avr32/mach-at32ap/pdc.c
+++ b/arch/avr32/mach-at32ap/pdc.c
@@ -35,7 +35,6 @@ static int __init pdc_probe(struct platform_device *pdev)
 }
 
 static struct platform_driver pdc_driver = {
-	.probe		= pdc_probe,
 	.driver		= {
 		.name	= "pdc",
 	},
@@ -43,6 +42,6 @@ static struct platform_driver pdc_driver = {
 
 static int __init pdc_init(void)
 {
-	return platform_driver_register(&pdc_driver);
+	return platform_driver_probe(&pdc_driver, pdc_probe);
 }
 arch_initcall(pdc_init);
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 405ee6b..ed81a8b 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -50,35 +50,48 @@ static struct pio_device *gpio_to_pio(unsigned int gpio)
 }
 
 /* Pin multiplexing API */
+static DEFINE_SPINLOCK(pio_lock);
 
-void __init at32_select_periph(unsigned int pin, unsigned int periph,
-			       unsigned long flags)
+void __init at32_select_periph(unsigned int port, u32 pin_mask,
+			       unsigned int periph, unsigned long flags)
 {
 	struct pio_device *pio;
-	unsigned int pin_index = pin & 0x1f;
-	u32 mask = 1 << pin_index;
 
-	pio = gpio_to_pio(pin);
+	/* assign and verify pio */
+	pio = gpio_to_pio(port);
 	if (unlikely(!pio)) {
-		printk("pio: invalid pin %u\n", pin);
+		printk(KERN_WARNING "pio: invalid port %u\n", port);
 		goto fail;
 	}
 
-	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask)
-			 || gpiochip_is_requested(&pio->chip, pin_index))) {
-		printk("%s: pin %u is busy\n", pio->name, pin_index);
+	/* Test if any of the requested pins is already muxed */
+	spin_lock(&pio_lock);
+	if (unlikely(pio->pinmux_mask & pin_mask)) {
+		printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n",
+		       pio->name, pin_mask, pio->pinmux_mask & pin_mask);
+		spin_unlock(&pio_lock);
 		goto fail;
 	}
 
-	pio_writel(pio, PUER, mask);
+	pio->pinmux_mask |= pin_mask;
+
+	/* enable pull ups */
+	pio_writel(pio, PUER, pin_mask);
+
+	/* select either peripheral A or B */
 	if (periph)
-		pio_writel(pio, BSR, mask);
+		pio_writel(pio, BSR, pin_mask);
 	else
-		pio_writel(pio, ASR, mask);
+		pio_writel(pio, ASR, pin_mask);
+
+	/* enable peripheral control */
+	pio_writel(pio, PDR, pin_mask);
 
-	pio_writel(pio, PDR, mask);
+	/* Disable pull ups if not requested. */
 	if (!(flags & AT32_GPIOF_PULLUP))
-		pio_writel(pio, PUDR, mask);
+		pio_writel(pio, PUDR, pin_mask);
+
+	spin_unlock(&pio_lock);
 
 	return;
 
@@ -134,6 +147,25 @@ fail:
 	dump_stack();
 }
 
+/*
+ * Undo a previous pin reservation. Will not affect the hardware
+ * configuration.
+ */
+void at32_deselect_pin(unsigned int pin)
+{
+	struct pio_device *pio;
+	unsigned int pin_index = pin & 0x1f;
+
+	pio = gpio_to_pio(pin);
+	if (unlikely(!pio)) {
+		printk("pio: invalid pin %u\n", pin);
+		dump_stack();
+		return;
+	}
+
+	clear_bit(pin_index, &pio->pinmux_mask);
+}
+
 /* Reserve a pin, preventing anyone else from changing its configuration. */
 void __init at32_reserve_pin(unsigned int pin)
 {
@@ -382,7 +414,6 @@ static int __init pio_probe(struct platform_device *pdev)
 }
 
 static struct platform_driver pio_driver = {
-	.probe		= pio_probe,
 	.driver		= {
 		.name		= "pio",
 	},
@@ -390,7 +421,7 @@ static struct platform_driver pio_driver = {
 
 static int __init pio_init(void)
 {
-	return platform_driver_register(&pio_driver);
+	return platform_driver_probe(&pio_driver, pio_probe);
 }
 postcore_initcall(pio_init);
 
diff --git a/arch/avr32/oprofile/Makefile b/arch/avr32/oprofile/Makefile
index 1fe81c3..e0eb520 100644
--- a/arch/avr32/oprofile/Makefile
+++ b/arch/avr32/oprofile/Makefile
@@ -5,4 +5,4 @@ oprofile-y		:= $(addprefix ../../../drivers/oprofile/,	\
 				event_buffer.o oprofile_files.o		\
 				oprofilefs.o oprofile_stats.o		\
 				timer_int.o)
-oprofile-y		+= op_model_avr32.o
+oprofile-y		+= op_model_avr32.o backtrace.o
diff --git a/arch/avr32/oprofile/backtrace.c b/arch/avr32/oprofile/backtrace.c
new file mode 100644
index 0000000..75d9ad6
--- /dev/null
+++ b/arch/avr32/oprofile/backtrace.c
@@ -0,0 +1,81 @@
+/*
+ * AVR32 specific backtracing code for oprofile
+ *
+ * Copyright 2008 Weinmann GmbH
+ *
+ * Author: Nikolaus Voss <n.voss@weinmann.de>
+ *
+ * Based on i386 oprofile backtrace code by John Levon and David Smith
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+
+/* The first two words of each frame on the stack look like this if we have
+ * frame pointers */
+struct frame_head {
+	unsigned long lr;
+	struct frame_head *fp;
+};
+
+/* copied from arch/avr32/kernel/process.c */
+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
+{
+	return (p > (unsigned long)tinfo)
+		&& (p < (unsigned long)tinfo + THREAD_SIZE - 3);
+}
+
+/* copied from arch/x86/oprofile/backtrace.c */
+static struct frame_head *dump_user_backtrace(struct frame_head *head)
+{
+	struct frame_head bufhead[2];
+
+	/* Also check accessibility of one struct frame_head beyond */
+	if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
+		return NULL;
+	if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
+		return NULL;
+
+	oprofile_add_trace(bufhead[0].lr);
+
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (bufhead[0].fp <= head)
+		return NULL;
+
+	return bufhead[0].fp;
+}
+
+void avr32_backtrace(struct pt_regs * const regs, unsigned int depth)
+{
+	/* Get first frame pointer */
+	struct frame_head *head = (struct frame_head *)(regs->r7);
+
+	if (!user_mode(regs)) {
+#ifdef CONFIG_FRAME_POINTER
+		/*
+		 * Traverse the kernel stack from frame to frame up to
+		 * "depth" steps.
+		 */
+		while (depth-- && valid_stack_ptr(task_thread_info(current),
+						  (unsigned long)head)) {
+			oprofile_add_trace(head->lr);
+			if (head->fp <= head)
+				break;
+			head = head->fp;
+		}
+#endif
+	} else {
+		/* Assume we have frame pointers in user mode process */
+		while (depth-- && head)
+			head = dump_user_backtrace(head);
+	}
+}
+
+
diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c
index df42325..a3e9b3c 100644
--- a/arch/avr32/oprofile/op_model_avr32.c
+++ b/arch/avr32/oprofile/op_model_avr32.c
@@ -22,6 +22,8 @@
 #define AVR32_PERFCTR_IRQ_GROUP	0
 #define AVR32_PERFCTR_IRQ_LINE	1
 
+void avr32_backtrace(struct pt_regs * const regs, unsigned int depth);
+
 enum { PCCNT, PCNT0, PCNT1, NR_counter };
 
 struct avr32_perf_counter {
@@ -223,6 +225,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	memcpy(ops, &avr32_perf_counter_ops,
 			sizeof(struct oprofile_operations));
 
+	ops->backtrace = avr32_backtrace;
+
 	printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
 
 	return 0;
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 4154ff1..29e71ed 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -64,8 +64,11 @@ config HARDWARE_PM
 	depends on OPROFILE
 
 source "init/Kconfig"
+
 source "kernel/Kconfig.preempt"
 
+source "kernel/Kconfig.freezer"
+
 menu "Blackfin Processor Options"
 
 comment "Processor and Board Settings"
@@ -162,16 +165,28 @@ config BF549
 config BF561
 	bool "BF561"
 	help
-	  Not Supported Yet - Work in progress - BF561 Processor Support.
+	  BF561 Processor Support.
 
 endchoice
 
+config BF_REV_MIN
+	int
+	default 0 if (BF52x || BF54x)
+	default 2 if (BF537 || BF536 || BF534)
+	default 3 if (BF561 ||BF533 || BF532 || BF531)
+
+config BF_REV_MAX
+	int
+	default 2 if (BF52x || BF54x)
+	default 3 if (BF537 || BF536 || BF534)
+	default 5 if (BF561)
+	default 6 if (BF533 || BF532 || BF531)
+
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_1 if BF527
-	default BF_REV_0_2 if BF537
-	default BF_REV_0_3 if BF533
-	default BF_REV_0_0 if BF549
+	default BF_REV_0_1 if (BF52x || BF54x)
+	default BF_REV_0_2 if (BF534 || BF536 || BF537)
+	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
 
 config BF_REV_0_0
 	bool "0.0"
@@ -183,7 +198,7 @@ config BF_REV_0_1
 
 config BF_REV_0_2
 	bool "0.2"
-	depends on (BF537 || BF536 || BF534)
+	depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
 
 config BF_REV_0_3
 	bool "0.3"
@@ -197,6 +212,10 @@ config BF_REV_0_5
 	bool "0.5"
 	depends on (BF561 || BF533 || BF532 || BF531)
 
+config BF_REV_0_6
+	bool "0.6"
+	depends on (BF533 || BF532 || BF531)
+
 config BF_REV_ANY
 	bool "any"
 
@@ -249,7 +268,7 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
+	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
 	default y
 
 source "arch/blackfin/mach-bf527/Kconfig"
@@ -286,13 +305,20 @@ config BOOT_LOAD
 	  memory region is used to capture NULL pointer references as well
 	  as some core kernel functions.
 
+config ROM_BASE
+	hex "Kernel ROM Base"
+	default "0x20040000"
+	range 0x20000000 0x20400000 if !(BF54x || BF561)
+	range 0x20000000 0x30000000 if (BF54x || BF561)
+	help
+
 comment "Clock/PLL Setup"
 
 config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
 	default "11059200" if BFIN533_STAMP
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP)
+	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
 	default "30000000" if BFIN561_EZKIT
 	default "24576000" if PNAV10
 	default "10000000" if BFIN532_IP0X
@@ -332,7 +358,7 @@ config VCO_MULT
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
-	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP)
+	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
 	help
 	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.
 	  PLL Frequency = (Crystal Frequency) * (this setting)
@@ -368,14 +394,6 @@ config SCLK_DIV
 	  This can be between 1 and 15
 	  System Clock = (PLL frequency) / (this setting)
 
-config MAX_MEM_SIZE
-	int "Max SDRAM Memory Size in MBytes"
-	depends on !MPU
-	default 512
-	help
-	  This is the max memory size that the kernel will create CPLB
-	  tables for.  Your system will not be able to handle any more.
-
 choice
 	prompt "DDR SDRAM Chip Type"
 	depends on BFIN_KERNEL_CLOCK
@@ -389,6 +407,14 @@ config MEM_MT46V32M16_5B
 	bool "MT46V32M16_5B"
 endchoice
 
+config MAX_MEM_SIZE
+	int "Max SDRAM Memory Size in MBytes"
+	depends on !MPU
+	default 512
+	help
+	  This is the max memory size that the kernel will create CPLB
+	  tables for.  Your system will not be able to handle any more.
+
 #
 # Max & Min Speeds for various Chips
 #
@@ -455,8 +481,6 @@ config CYCLES_CLOCKSOURCE
 
 source kernel/time/Kconfig
 
-comment "Memory Setup"
-
 comment "Misc"
 
 choice
@@ -622,6 +646,15 @@ config CPLB_SWITCH_TAB_L1
 	  If enabled, the CPLB Switch Tables are linked
 	  into L1 data memory. (less latency)
 
+config APP_STACK_L1
+	bool "Support locating application stack in L1 Scratch Memory"
+	default y
+	help
+	  If enabled the application stack can be located in L1
+	  scratch memory (less latency).
+
+	  Currently only works with FLAT binaries.
+
 comment "Speed Optimizations"
 config BFIN_INS_LOWOVERHEAD
 	bool "ins[bwl] low overhead, higher interrupt latency"
@@ -755,6 +788,13 @@ config BFIN_WT
 
 endchoice
 
+config BFIN_L2_CACHEABLE
+	bool "Cache L2 SRAM"
+	depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || BF561)
+	default n
+	help
+	  Select to make L2 SRAM cacheable in L1 data and instruction cache.
+
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
 	default n
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index c468624..3ad2598 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -2,6 +2,22 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config HAVE_ARCH_KGDB
+       def_bool y
+
+config DEBUG_VERBOSE
+	bool "Verbose fault messages"
+	default y
+	select PRINTK
+	help
+	  When a program crashes due to an exception, or the kernel detects
+	  an internal error, the kernel can print a not so brief message
+	  explaining what the problem was. This debugging information is
+	  useful to developers and kernel hackers when tracking down problems,
+	  but mostly meaningless to other people. This is always helpful for
+	  debugging but serves no purpose on a production system.
+	  Most people should say N here.
+
 config DEBUG_MMRS
 	bool "Generate Blackfin MMR tree"
 	select DEBUG_FS
@@ -22,6 +38,44 @@ config DEBUG_HWERR
 	  hardware error interrupts and need to know where they are coming
 	  from.
 
+config DEBUG_DOUBLEFAULT
+	bool "Debug Double Faults"
+	default n
+	help
+	  If an exception is caused while executing code within the exception
+	  handler, the NMI handler, the reset vector, or in emulator mode,
+	  a double fault occurs. On the Blackfin, this is a unrecoverable
+	  event. You have two options:
+	  - RESET exactly when double fault occurs. The excepting
+	    instruction address is stored in RETX, where the next kernel
+	    boot will print it out.
+	  - Print debug message. This is much more error prone, although
+	    easier to handle. It is error prone since:
+	    - The excepting instruction is not committed.
+	    - All writebacks from the instruction are prevented.
+	    - The generated exception is not taken.
+	    - The EXCAUSE field is updated with an unrecoverable event
+	    The only way to check this is to see if EXCAUSE contains the
+	    unrecoverable event value at every exception return. By selecting
+	    this option, you are skipping over the faulting instruction, and 
+	    hoping things stay together enough to print out a debug message.
+
+	  This does add a little kernel code, but is the only method to debug
+	  double faults - if unsure say "Y"
+
+choice
+	prompt "Double Fault Failure Method"
+	default DEBUG_DOUBLEFAULT_PRINT
+	depends on DEBUG_DOUBLEFAULT
+
+config DEBUG_DOUBLEFAULT_PRINT
+	bool "Print"
+
+config DEBUG_DOUBLEFAULT_RESET
+	bool "Reset"
+
+endchoice
+
 config DEBUG_ICACHE_CHECK
 	bool "Check Instruction cache coherency"
 	depends on DEBUG_KERNEL
@@ -143,6 +197,7 @@ config DEBUG_BFIN_NO_KERN_HWTRACE
 config EARLY_PRINTK
 	bool "Early printk" 
 	default n
+	select SERIAL_CORE_CONSOLE
 	help
 	  This option enables special console drivers which allow the kernel
 	  to print messages very early in the bootup process.
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index eac0533..6bf5097 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -67,6 +67,7 @@ rev-$(CONFIG_BF_REV_0_2)  := 0.2
 rev-$(CONFIG_BF_REV_0_3)  := 0.3
 rev-$(CONFIG_BF_REV_0_4)  := 0.4
 rev-$(CONFIG_BF_REV_0_5)  := 0.5
+rev-$(CONFIG_BF_REV_0_6)  := 0.6
 rev-$(CONFIG_BF_REV_NONE) := none
 rev-$(CONFIG_BF_REV_ANY)  := any
 
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
new file mode 100644
index 0000000..4443a47
--- /dev/null
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -0,0 +1,1427 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.3
+# Thu Aug 28 16:49:53 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+CONFIG_BF526=y
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF52x=y
+CONFIG_MEM_MT48LC32M16A2TG_75=y
+# CONFIG_BFIN527_EZKIT is not set
+# CONFIG_BFIN527_BLUETECHNIX_CM is not set
+CONFIG_BFIN526_EZBRD=y
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_IRQ_SPI_ERROR=7
+CONFIG_IRQ_NFC_ERROR=7
+CONFIG_IRQ_HDMA_ERROR=7
+CONFIG_IRQ_HDMA=7
+CONFIG_IRQ_USB_EINT=10
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Memory Setup
+#
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x5554
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC0
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_BFIN=m
+CONFIG_BFIN_NAND_BASE=0x20212000
+CONFIG_BFIN_NAND_CLE=2
+CONFIG_BFIN_NAND_ALE=1
+CONFIG_BFIN_NAND_READY=3
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_BF5XX is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_AX88180 is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_TWI_KEYPAD is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+# CONFIG_SERIAL_BFIN_UART0 is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SPI devices
+#
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_I2S=m
+CONFIG_SND_BF5XX_SOC_SSM2602=m
+# CONFIG_SND_BF5XX_AC97 is not set
+CONFIG_SND_BF5XX_SOC_SPORT=m
+CONFIG_SND_BF5XX_SOC_I2S=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+CONFIG_SND_SOC_SSM2602=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 66854a8..4a2a660 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -772,7 +772,7 @@ CONFIG_UNIX98_PTYS=y
 #
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 6bc11db..deeb5e4 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -674,7 +674,7 @@ CONFIG_UNIX98_PTYS=y
 #
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -740,7 +740,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index d77d991..c23267e 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -681,7 +681,7 @@ CONFIG_UNIX98_PTYS=y
 #
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 5fd7c4b..63a0f85 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -731,7 +731,7 @@ CONFIG_CAN4LINUX=y
 # CONFIG_CAN_UNCTWINCAN is not set
 CONFIG_CAN_BLACKFIN=m
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -871,7 +871,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 390669e..bf63660 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -855,7 +855,7 @@ CONFIG_UNIX98_PTYS=y
 #
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1001,7 +1001,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 # CONFIG_USB_DABUSB is not set
 
 #
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 976a4d7..3c70d62 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -719,7 +719,7 @@ CONFIG_UNIX98_PTYS=y
 #
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -785,7 +785,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 0799aa9..b6a1463 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -679,7 +679,7 @@ CONFIG_UNIX98_PTYS=y
 #
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 09deea4..c3ba906 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -672,7 +672,7 @@ CONFIG_HWMON=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 219fc34..cdc6b7f 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -703,7 +703,7 @@ CONFIG_HWMON=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 9873d58..f074bdc 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -683,7 +683,7 @@ CONFIG_HWMON=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 0e3605f..5c44fdb 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -762,7 +762,7 @@ CONFIG_UNIX98_PTYS=y
 #
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -909,7 +909,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 # CONFIG_USB_DABUSB is not set
 
 #
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index 59c7cdb..086fe5d 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -684,7 +684,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index ba0bee9..1fc31f1 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.12
+# Linux kernel version: 2.6.22.14
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -192,7 +192,7 @@ CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=400000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
@@ -516,7 +516,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -635,25 +635,25 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -681,7 +681,15 @@ CONFIG_BFIN_TIMER_LATENCY=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
diff --git a/arch/blackfin/include/asm/a.out.h b/arch/blackfin/include/asm/a.out.h
deleted file mode 100644
index 6c3d652..0000000
--- a/arch/blackfin/include/asm/a.out.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __BFIN_A_OUT_H__
-#define __BFIN_A_OUT_H__
-
-struct exec {
-	unsigned long a_info;	/* Use macros N_MAGIC, etc for access */
-	unsigned a_text;	/* length of text, in bytes */
-	unsigned a_data;	/* length of data, in bytes */
-	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-	unsigned a_syms;	/* length of symbol table data in file, in bytes */
-	unsigned a_entry;	/* start address */
-	unsigned a_trsize;	/* length of relocation info for text, in bytes */
-	unsigned a_drsize;	/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif				/* __BFIN_A_OUT_H__ */
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index 7ba70de..56dcb0a 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -63,7 +63,6 @@ extern void bfin_dcache_init(void);
 extern void init_exception_vectors(void);
 extern void program_IAR(void);
 
-extern void bfin_reset(void);
 extern asmlinkage void lower_to_irq14(void);
 extern asmlinkage void bfin_return_from_exception(void);
 extern asmlinkage void evt14_softirq(void);
@@ -92,6 +91,8 @@ extern int sram_free(const void*);
 extern void *sram_alloc_with_lsl(size_t, unsigned long);
 extern int sram_free_with_lsl(const void*);
 
+extern void *isram_memcpy(void *dest, const void *src, size_t n);
+
 extern const char bfin_board_name[];
 
 extern unsigned long bfin_sic_iwr[];
@@ -104,7 +105,7 @@ extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
 	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
 	_ebss_l2[], _l2_lma_start[];
 
-/* only used when CONFIG_MTD_UCLINUX */
+/* only used when MTD_UCLINUX */
 extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
 
 #ifdef CONFIG_BFIN_ICACHE_LOCK
diff --git a/arch/blackfin/include/asm/bfrom.h b/arch/blackfin/include/asm/bfrom.h
new file mode 100644
index 0000000..cfe8024
--- /dev/null
+++ b/arch/blackfin/include/asm/bfrom.h
@@ -0,0 +1,85 @@
+/* Blackfin on-chip ROM API
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFROM_H__
+#define __BFROM_H__
+
+#include <linux/types.h>
+
+/* Possible syscontrol action flags */
+#define SYSCTRL_READ        0x00000000    /* read registers */
+#define SYSCTRL_WRITE       0x00000001    /* write registers */
+#define SYSCTRL_SYSRESET    0x00000002    /* perform system reset */
+#define SYSCTRL_CORERESET   0x00000004    /* perform core reset */
+#define SYSCTRL_SOFTRESET   0x00000006    /* perform core and system reset */
+#define SYSCTRL_VRCTL       0x00000010    /* read/write VR_CTL register */
+#define SYSCTRL_EXTVOLTAGE  0x00000020    /* VDDINT supplied externally */
+#define SYSCTRL_INTVOLTAGE  0x00000000    /* VDDINT generated by on-chip regulator */
+#define SYSCTRL_OTPVOLTAGE  0x00000040    /* For Factory Purposes Only */
+#define SYSCTRL_PLLCTL      0x00000100    /* read/write PLL_CTL register */
+#define SYSCTRL_PLLDIV      0x00000200    /* read/write PLL_DIV register */
+#define SYSCTRL_LOCKCNT     0x00000400    /* read/write PLL_LOCKCNT register */
+#define SYSCTRL_PLLSTAT     0x00000800    /* read/write PLL_STAT register */
+
+typedef struct ADI_SYSCTRL_VALUES {
+	uint16_t uwVrCtl;
+	uint16_t uwPllCtl;
+	uint16_t uwPllDiv;
+	uint16_t uwPllLockCnt;
+	uint16_t uwPllStat;
+} ADI_SYSCTRL_VALUES;
+
+static uint32_t (* const bfrom_SysControl)(uint32_t action_flags, ADI_SYSCTRL_VALUES *power_settings, void *reserved) = (void *)0xEF000038;
+
+/* We need a dedicated function since we need to screw with the stack pointer
+ * when resetting.  The on-chip ROM will save/restore registers on the stack
+ * when doing a system reset, so the stack cannot be outside of the chip.
+ */
+__attribute__((__noreturn__))
+static inline void bfrom_SoftReset(void *new_stack)
+{
+	while (1)
+		__asm__ __volatile__(
+			"sp = %[stack];"
+			"jump (%[bfrom_syscontrol]);"
+			: : [bfrom_syscontrol] "p"(bfrom_SysControl),
+				"q0"(SYSCTRL_SOFTRESET),
+				"q1"(0),
+				"q2"(NULL),
+				[stack] "p"(new_stack)
+		);
+}
+
+/* OTP Functions */
+static uint32_t (* const bfrom_OtpCommand)(uint32_t command, uint32_t value) = (void *)0xEF000018;
+static uint32_t (* const bfrom_OtpRead)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)0xEF00001A;
+static uint32_t (* const bfrom_OtpWrite)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)0xEF00001C;
+
+/* otp command: defines for "command" */
+#define OTP_INIT                 0x00000001
+#define OTP_CLOSE                0x00000002
+
+/* otp read/write: defines for "flags" */
+#define OTP_LOWER_HALF           0x00000000 /* select upper/lower 64-bit half (bit 0) */
+#define OTP_UPPER_HALF           0x00000001
+#define OTP_NO_ECC               0x00000010 /* do not use ECC */
+#define OTP_LOCK                 0x00000020 /* sets page protection bit for page */
+#define OTP_CHECK_FOR_PREV_WRITE 0x00000080
+
+/* Return values for all functions */
+#define OTP_SUCCESS          0x00000000
+#define OTP_MASTER_ERROR     0x001
+#define OTP_WRITE_ERROR      0x003
+#define OTP_READ_ERROR       0x005
+#define OTP_ACC_VIO_ERROR    0x009
+#define OTP_DATA_MULT_ERROR  0x011
+#define OTP_ECC_MULT_ERROR   0x021
+#define OTP_PREV_WR_ERROR    0x041
+#define OTP_DATA_SB_WARN     0x100
+#define OTP_ECC_SB_WARN      0x200
+
+#endif
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index d81a775..4403415 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -30,13 +30,11 @@
 #ifndef _BLACKFIN_CACHEFLUSH_H
 #define _BLACKFIN_CACHEFLUSH_H
 
-#include <asm/cplb.h>
-
-extern void blackfin_icache_dcache_flush_range(unsigned int, unsigned int);
-extern void blackfin_icache_flush_range(unsigned int, unsigned int);
-extern void blackfin_dcache_flush_range(unsigned int, unsigned int);
-extern void blackfin_dcache_invalidate_range(unsigned int, unsigned int);
-extern void blackfin_dflush_page(void *);
+extern void blackfin_icache_dcache_flush_range(unsigned long start_address, unsigned long end_address);
+extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address);
+extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address);
+extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address);
+extern void blackfin_dflush_page(void *page);
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
@@ -87,4 +85,21 @@ do { memcpy(dst, src, len); \
 # define flush_dcache_page(page)			do { } while (0)
 #endif
 
+extern unsigned long reserved_mem_dcache_on;
+extern unsigned long reserved_mem_icache_on;
+
+static inline int bfin_addr_dcachable(unsigned long addr)
+{
+#ifdef CONFIG_BFIN_DCACHE
+	if (addr < (_ramend - DMA_UNCACHED_REGION))
+		return 1;
+#endif
+
+	if (reserved_mem_dcache_on &&
+		addr >= _ramend && addr < physical_mem_end)
+		return 1;
+
+	return 0;
+}
+
 #endif				/* _BLACKFIN_ICACHEFLUSH_H */
diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h
index 05d6f05..9e8b403 100644
--- a/arch/blackfin/include/asm/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -55,7 +55,13 @@
 #endif
 
 #define L1_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
-#define L2_MEMORY        (CPLB_COMMON)
+#ifdef CONFIG_BFIN_L2_CACHEABLE
+#define L2_IMEMORY        (SDRAM_IGENERIC)
+#define L2_DMEMORY        (SDRAM_DGENERIC)
+#else
+#define L2_IMEMORY        (CPLB_COMMON)
+#define L2_DMEMORY        (CPLB_COMMON)
+#endif
 #define SDRAM_DNON_CHBL  (CPLB_COMMON)
 #define SDRAM_EBIU       (CPLB_COMMON)
 #define SDRAM_OOPS       (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
diff --git a/arch/blackfin/include/asm/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h
index 0eb1c1b..f845b41 100644
--- a/arch/blackfin/include/asm/cplbinit.h
+++ b/arch/blackfin/include/asm/cplbinit.h
@@ -87,9 +87,6 @@ extern u_long dpdt_swapcount_table[];
 
 #endif /* CONFIG_MPU */
 
-extern unsigned long reserved_mem_dcache_on;
-extern unsigned long reserved_mem_icache_on;
-
-extern void generate_cpl_tables(void);
+extern void generate_cplb_tables(void);
 
 #endif
diff --git a/arch/blackfin/include/asm/cpumask.h b/arch/blackfin/include/asm/cpumask.h
deleted file mode 100644
index b20a8e9..0000000
--- a/arch/blackfin/include/asm/cpumask.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_BLACKFIN_CPUMASK_H
-#define _ASM_BLACKFIN_CPUMASK_H
-
-#include <asm-generic/cpumask.h>
-
-#endif				/* _ASM_BLACKFIN_CPUMASK_H */
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index 1a13c2f..ede748d 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -80,4 +80,15 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 		      int nhwentries, enum dma_data_direction direction);
 
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					dma_addr_t handle, size_t size,
+					enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					dma_addr_t handle, size_t size,
+					enum dma_data_direction dir)
+{
+}
 #endif				/* _BLACKFIN_DMA_MAPPING_H */
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index 67a03a8a..cdbfcfc 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -122,6 +122,6 @@ do {											\
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
 
 #endif
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index cbbf7ff..7dc77a2 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -134,6 +134,36 @@ extern void dma_insb(unsigned long port, void *addr, unsigned short count);
 extern void dma_insw(unsigned long port, void *addr, unsigned short count);
 extern void dma_insl(unsigned long port, void *addr, unsigned short count);
 
+static inline void readsl(const void __iomem *addr, void *buf, int len)
+{
+	insl((unsigned long)addr, buf, len);
+}
+
+static inline void readsw(const void __iomem *addr, void *buf, int len)
+{
+	insw((unsigned long)addr, buf, len);
+}
+
+static inline void readsb(const void __iomem *addr, void *buf, int len)
+{
+	insb((unsigned long)addr, buf, len);
+}
+
+static inline void writesl(const void __iomem *addr, const void *buf, int len)
+{
+	outsl((unsigned long)addr, buf, len);
+}
+
+static inline void writesw(const void __iomem *addr, const void *buf, int len)
+{
+	outsw((unsigned long)addr, buf, len);
+}
+
+static inline void writesb(const void __iomem *addr, const void *buf, int len)
+{
+	outsb((unsigned long)addr, buf, len);
+}
+
 /*
  * Map some physical address range into the kernel address space.
  */
diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h
index 0f73847..26ebac6 100644
--- a/arch/blackfin/include/asm/kgdb.h
+++ b/arch/blackfin/include/asm/kgdb.h
@@ -124,9 +124,16 @@ enum regnames {
 /* Number of bytes of registers.  */
 #define NUMREGBYTES BFIN_NUM_REGS*4
 
-#define BREAKPOINT() asm("   EXCPT 2;");
-#define BREAK_INSTR_SIZE       2
-#define HW_BREAKPOINT_NUM		6
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm("   EXCPT 2;");
+}
+#define BREAK_INSTR_SIZE	2
+#define CACHE_FLUSH_IS_SAFE	1
+#define HW_INST_WATCHPOINT_NUM	6
+#define HW_WATCHPOINT_NUM	8
+#define TYPE_INST_WATCHPOINT	0
+#define TYPE_DATA_WATCHPOINT	1
 
 /* Instruction watchpoint address control register bits mask */
 #define WPPWR		0x1
@@ -163,10 +170,11 @@ enum regnames {
 #define WPDAEN1		0x8
 #define WPDCNTEN0	0x10
 #define WPDCNTEN1	0x20
+
 #define WPDSRC0		0xc0
-#define WPDACC0		0x300
+#define WPDACC0_OFFSET	8
 #define WPDSRC1		0xc00
-#define WPDACC1		0x3000
+#define WPDACC1_OFFSET	12
 
 /* Watchpoint status register bits mask */
 #define STATIA0		0x1
@@ -178,7 +186,4 @@ enum regnames {
 #define STATDA0		0x40
 #define STATDA1		0x80
 
-extern void kgdb_print(const char *fmt, ...);
-extern void init_kgdb_uart(void);
-
 #endif
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index 8529552..35593dd 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -45,49 +45,12 @@ extern unsigned long l1_stack_len;
 extern int l1sram_free(const void*);
 extern void *l1sram_alloc_max(void*);
 
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/* Called when creating a new context during fork() or execve().  */
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-#ifdef CONFIG_MPU
-	unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
-	mm->context.page_rwx_mask = (unsigned long *)p;
-	memset(mm->context.page_rwx_mask, 0,
-	       page_mask_nelts * 3 * sizeof(long));
-#endif
-	return 0;
-}
-
 static inline void free_l1stack(void)
 {
 	nr_l1stack_tasks--;
 	if (nr_l1stack_tasks == 0)
 		l1sram_free(l1_stack_base);
 }
-static inline void destroy_context(struct mm_struct *mm)
-{
-	struct sram_list_struct *tmp;
-
-	if (current_l1_stack_save == mm->context.l1_stack_save)
-		current_l1_stack_save = NULL;
-	if (mm->context.l1_stack_save)
-		free_l1stack();
-
-	while ((tmp = mm->context.sram_list)) {
-		mm->context.sram_list = tmp->next;
-		sram_free(tmp->addr);
-		kfree(tmp);
-	}
-#ifdef CONFIG_MPU
-	if (current_rwx_mask == mm->context.page_rwx_mask)
-		current_rwx_mask = NULL;
-	free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
-#endif
-}
 
 static inline unsigned long
 alloc_l1stack(unsigned long length, unsigned long *stack_base)
@@ -134,6 +97,7 @@ static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_m
 	}
 #endif
 
+#ifdef CONFIG_APP_STACK_L1
 	/* L1 stack switching.  */
 	if (!next_mm->context.l1_stack_save)
 		return;
@@ -144,6 +108,7 @@ static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_m
 	}
 	current_l1_stack_save = next_mm->context.l1_stack_save;
 	memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+#endif
 }
 
 #ifdef CONFIG_MPU
@@ -180,4 +145,44 @@ static inline void update_protections(struct mm_struct *mm)
 }
 #endif
 
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/* Called when creating a new context during fork() or execve().  */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+#ifdef CONFIG_MPU
+	unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
+	mm->context.page_rwx_mask = (unsigned long *)p;
+	memset(mm->context.page_rwx_mask, 0,
+	       page_mask_nelts * 3 * sizeof(long));
+#endif
+	return 0;
+}
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+	struct sram_list_struct *tmp;
+
+#ifdef CONFIG_APP_STACK_L1
+	if (current_l1_stack_save == mm->context.l1_stack_save)
+		current_l1_stack_save = 0;
+	if (mm->context.l1_stack_save)
+		free_l1stack();
+#endif
+
+	while ((tmp = mm->context.sram_list)) {
+		mm->context.sram_list = tmp->next;
+		sram_free(tmp->addr);
+		kfree(tmp);
+	}
+#ifdef CONFIG_MPU
+	if (current_rwx_mask == mm->context.page_rwx_mask)
+		current_rwx_mask = NULL;
+	free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
+#endif
+}
+
 #endif
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index 6f3995b..e3e9b41 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -134,6 +134,12 @@ static inline uint32_t __pure bfin_revid(void)
 	return revid;
 }
 
+static inline uint16_t __pure bfin_cpuid(void)
+{
+	return (bfin_read_CHIPID() & CHIPID_FAMILY) >> 12;
+
+}
+
 static inline uint32_t __pure bfin_compiled_revid(void)
 {
 #if defined(CONFIG_BF_REV_0_0)
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
index a45a80e..e3f086d 100644
--- a/arch/blackfin/include/asm/ptrace.h
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -158,6 +158,8 @@ extern void show_regs(struct pt_regs *);
 #define PT_SEQSTAT 8
 #define PT_IPEND 4
 
+#define PT_ORIG_R0 208
+#define PT_ORIG_P0 212
 #define PT_SYSCFG 216
 #define PT_TEXT_ADDR 220
 #define PT_TEXT_END_ADDR 224
diff --git a/arch/blackfin/include/asm/timex.h b/arch/blackfin/include/asm/timex.h
index 22b0806..248aeb06 100644
--- a/arch/blackfin/include/asm/timex.h
+++ b/arch/blackfin/include/asm/timex.h
@@ -16,7 +16,7 @@ typedef unsigned long long cycles_t;
 static inline cycles_t get_cycles(void)
 {
 	unsigned long tmp, tmp2;
-	__asm__("%0 = cycles; %1 = cycles2;" : "=d"(tmp), "=d"(tmp2));
+	__asm__ __volatile__("%0 = cycles; %1 = cycles2;" : "=d"(tmp), "=d"(tmp2));
 	return tmp | ((cycles_t)tmp2 << 32);
 }
 
diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h
index f0e5f94..34f7295 100644
--- a/arch/blackfin/include/asm/traps.h
+++ b/arch/blackfin/include/asm/traps.h
@@ -59,6 +59,9 @@
 	level "   or a 16-bit register is accessed with a 32-bit instruction.\n"
 #define HWC_x3(level) \
 	"External Memory Addressing Error\n"
+#define EXC_0x04(level) \
+	"Unimplmented exception occured\n" \
+	level " - Maybe you forgot to install a custom exception handler?\n"
 #define HWC_x12(level) \
 	"Performance Monitor Overflow\n"
 #define HWC_x18(level) \
@@ -84,7 +87,7 @@
 	level "   a particular processor implementation.\n"
 #define EXC_0x22(level) \
 	"Illegal instruction combination\n" \
-	level " - See section for multi-issue rules in the ADSP-BF53x Blackfin\n" \
+	level " - See section for multi-issue rules in the Blackfin\n" \
 	level "   Processor Instruction Set Reference.\n"
 #define EXC_0x23(level) \
 	"Data access CPLB protection violation\n" \
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
index 881afe9..9bb85dd 100644
--- a/arch/blackfin/kernel/asm-offsets.c
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -60,6 +60,7 @@ int main(void)
 	DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
 
 	/* offsets into the pt_regs */
+	DEFINE(PT_ORIG_R0, offsetof(struct pt_regs, orig_r0));
 	DEFINE(PT_ORIG_P0, offsetof(struct pt_regs, orig_p0));
 	DEFINE(PT_ORIG_PC, offsetof(struct pt_regs, orig_pc));
 	DEFINE(PT_R0, offsetof(struct pt_regs, r0));
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 93229b3..339293d 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -117,15 +117,14 @@ int request_dma(unsigned int channel, char *device_id)
 
 #ifdef CONFIG_BF54x
 	if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
-		if (strncmp(device_id, "BFIN_UART", 9) == 0) {
-			dma_ch[channel].regs->peripheral_map &= 0x0FFF;
-			dma_ch[channel].regs->peripheral_map |=
+		unsigned int per_map;
+		per_map = dma_ch[channel].regs->peripheral_map & 0xFFF;
+		if (strncmp(device_id, "BFIN_UART", 9) == 0)
+			dma_ch[channel].regs->peripheral_map = per_map |
 				((channel - CH_UART2_RX + 0xC)<<12);
-		} else {
-			dma_ch[channel].regs->peripheral_map &= 0x0FFF;
-			dma_ch[channel].regs->peripheral_map |=
+		else
+			dma_ch[channel].regs->peripheral_map = per_map |
 				((channel - CH_UART2_RX + 0x6)<<12);
-		}
 	}
 #endif
 
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index ecbd141..6e08f42 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -231,14 +231,14 @@ inline int check_gpio(unsigned gpio)
 }
 #endif
 
-void gpio_error(unsigned gpio)
+static void gpio_error(unsigned gpio)
 {
 	printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio);
 }
 
 static void set_label(unsigned short ident, const char *label)
 {
-	if (label && str_ident) {
+	if (label) {
 		strncpy(str_ident[ident].name, label,
 			 RESOURCE_LABEL_SIZE);
 		str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
@@ -247,9 +247,6 @@ static void set_label(unsigned short ident, const char *label)
 
 static char *get_label(unsigned short ident)
 {
-	if (!str_ident)
-		return "UNKNOWN";
-
 	return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
 }
 
@@ -260,7 +257,7 @@ static int cmp_label(unsigned short ident, const char *label)
 		printk(KERN_ERR "Please provide none-null label\n");
 	}
 
-	if (label && str_ident)
+	if (label)
 		return strncmp(str_ident[ident].name,
 				 label, strlen(label));
 	else
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index 4806010..55af729 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -36,7 +36,7 @@ struct cplb_entry dcplb_tbl[MAX_CPLBS];
 int first_switched_icplb, first_switched_dcplb;
 int first_mask_dcplb;
 
-void __init generate_cpl_tables(void)
+void __init generate_cplb_tables(void)
 {
 	int i_d, i_i;
 	unsigned long addr;
@@ -83,8 +83,18 @@ void __init generate_cpl_tables(void)
 	dcplb_tbl[i_d].addr = L1_DATA_A_START;
 	dcplb_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
 #endif
+#if L1_CODE_LENGTH > 0
 	icplb_tbl[i_i].addr = L1_CODE_START;
 	icplb_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+#endif
+
+	/* Cover L2 memory */
+#if L2_LENGTH > 0
+	dcplb_tbl[i_d].addr = L2_START;
+	dcplb_tbl[i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB;
+	icplb_tbl[i_i].addr = L2_START;
+	icplb_tbl[i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB;
+#endif
 
 	first_mask_dcplb = i_d;
 	first_switched_dcplb = i_d + (1 << page_mask_order);
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 99f2831..baa52e2 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -21,6 +21,7 @@
 #include <linux/mm.h>
 
 #include <asm/blackfin.h>
+#include <asm/cacheflush.h>
 #include <asm/cplbinit.h>
 #include <asm/mmu_context.h>
 
@@ -144,9 +145,7 @@ static noinline int dcplb_miss(void)
 
 	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
 #ifdef CONFIG_BFIN_DCACHE
-	if (addr < _ramend - DMA_UNCACHED_REGION ||
-	    (reserved_mem_dcache_on && addr >= _ramend &&
-	     addr < physical_mem_end)) {
+	if (bfin_addr_dcachable(addr)) {
 		d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
 #ifdef CONFIG_BFIN_WT
 		d_data |= CPLB_L1_AOW | CPLB_WT;
@@ -322,9 +321,11 @@ int cplb_hdr(int seqstat, struct pt_regs *regs)
 void flush_switched_cplbs(void)
 {
 	int i;
+	unsigned long flags;
 
 	nr_cplb_flush++;
 
+	local_irq_save(flags);
 	disable_icplb();
 	for (i = first_switched_icplb; i < MAX_CPLBS; i++) {
 		icplb_tbl[i].data = 0;
@@ -338,6 +339,8 @@ void flush_switched_cplbs(void)
 		bfin_write32(DCPLB_DATA0 + i * 4, 0);
 	}
 	enable_dcplb();
+	local_irq_restore(flags);
+
 }
 
 void set_mask_dcplbs(unsigned long *masks)
@@ -345,10 +348,15 @@ void set_mask_dcplbs(unsigned long *masks)
 	int i;
 	unsigned long addr = (unsigned long)masks;
 	unsigned long d_data;
-	current_rwx_mask = masks;
+	unsigned long flags;
 
-	if (!masks)
+	if (!masks) {
+		current_rwx_mask = masks;
 		return;
+	}
+
+	local_irq_save(flags);
+	current_rwx_mask = masks;
 
 	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
 #ifdef CONFIG_BFIN_DCACHE
@@ -367,4 +375,5 @@ void set_mask_dcplbs(unsigned long *masks)
 		addr += PAGE_SIZE;
 	}
 	enable_dcplb();
+	local_irq_restore(flags);
 }
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 728f708..512f8c9 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -23,6 +23,7 @@
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
+#include <asm/cacheflush.h>
 #include <asm/cplb.h>
 #include <asm/cplbinit.h>
 
@@ -168,8 +169,8 @@ static struct cplb_desc cplb_data[] = {
 		.end = L2_START + L2_LENGTH,
 		.psize = SIZE_1M,
 		.attr = SWITCH_T | I_CPLB | D_CPLB,
-		.i_conf = L2_MEMORY,
-		.d_conf = L2_MEMORY,
+		.i_conf = L2_IMEMORY,
+		.d_conf = L2_DMEMORY,
 		.valid = (L2_LENGTH > 0),
 		.name = "L2 Memory",
 	},
@@ -308,7 +309,7 @@ __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
 	}
 }
 
-void __init generate_cpl_tables(void)
+void __init generate_cplb_tables(void)
 {
 
 	u16 i, j, process;
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index 60f67f9..1f4e3d2 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -35,6 +35,9 @@
 extern struct console *bfin_earlyserial_init(unsigned int port,
 						unsigned int cflag);
 #endif
+#ifdef CONFIG_BFIN_JTAG_COMM
+extern struct console *bfin_jc_early_init(void);
+#endif
 
 static struct console *early_console;
 
@@ -142,6 +145,15 @@ int __init setup_early_printk(char *buf)
 		early_console = earlyserial_init(buf);
 	}
 #endif
+
+#ifdef CONFIG_BFIN_JTAG_COMM
+	/* Check for Blackfin JTAG */
+	if (!strncmp(buf, "jtag", 4)) {
+		buf += 4;
+		early_console = bfin_jc_early_init();
+	}
+#endif
+
 #ifdef CONFIG_FB
 		/* TODO: add framebuffer console support */
 #endif
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index a1f9641..b795a20 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -1,32 +1,9 @@
 /*
- * File:         arch/blackfin/kernel/kgdb.c
- * Based on:
- * Author:       Sonic Zhang
+ * arch/blackfin/kernel/kgdb.c - Blackfin kgdb pieces
  *
- * Created:
- * Description:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Rev:          $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
- *
- * Modified:
- *               Copyright 2005-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/string.h>
@@ -39,24 +16,29 @@
 #include <linux/kgdb.h>
 #include <linux/console.h>
 #include <linux/init.h>
-#include <linux/debugger.h>
 #include <linux/errno.h>
 #include <linux/irq.h>
+#include <linux/uaccess.h>
 #include <asm/system.h>
 #include <asm/traps.h>
 #include <asm/blackfin.h>
+#include <asm/dma.h>
 
 /* Put the error code here just in case the user cares.  */
-int gdb_bf533errcode;
+int gdb_bfin_errcode;
 /* Likewise, the vector number here (since GDB only gets the signal
    number through the usual means, and that's not very specific).  */
-int gdb_bf533vector = -1;
+int gdb_bfin_vector = -1;
 
 #if KGDB_MAX_NO_CPUS != 8
 #error change the definition of slavecpulocks
 #endif
 
-void regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+#ifdef CONFIG_BFIN_WDT
+# error "Please unselect blackfin watchdog driver before build KGDB."
+#endif
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
 	gdb_regs[BFIN_R0] = regs->r0;
 	gdb_regs[BFIN_R1] = regs->r1;
@@ -133,7 +115,7 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 	gdb_regs[BFIN_SEQSTAT] = p->thread.seqstat;
 }
 
-void gdb_regs_to_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
 	regs->r0 = gdb_regs[BFIN_R0];
 	regs->r1 = gdb_regs[BFIN_R1];
@@ -199,171 +181,208 @@ struct hw_breakpoint {
 	unsigned int dataacc:2;
 	unsigned short count;
 	unsigned int addr;
-} breakinfo[HW_BREAKPOINT_NUM];
+} breakinfo[HW_WATCHPOINT_NUM];
 
-int kgdb_arch_init(void)
-{
-	debugger_step = 0;
-
-	kgdb_remove_all_hw_break();
-	return 0;
-}
-
-int kgdb_set_hw_break(unsigned long addr)
+int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 {
 	int breakno;
-	for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++)
-		if (!breakinfo[breakno].occupied) {
+	int bfin_type;
+	int dataacc = 0;
+
+	switch (type) {
+	case BP_HARDWARE_BREAKPOINT:
+		bfin_type = TYPE_INST_WATCHPOINT;
+		break;
+	case BP_WRITE_WATCHPOINT:
+		dataacc = 1;
+		bfin_type = TYPE_DATA_WATCHPOINT;
+		break;
+	case BP_READ_WATCHPOINT:
+		dataacc = 2;
+		bfin_type = TYPE_DATA_WATCHPOINT;
+		break;
+	case BP_ACCESS_WATCHPOINT:
+		dataacc = 3;
+		bfin_type = TYPE_DATA_WATCHPOINT;
+		break;
+	default:
+		return -ENOSPC;
+	}
+
+	/* Becasue hardware data watchpoint impelemented in current
+	 * Blackfin can not trigger an exception event as the hardware
+	 * instrction watchpoint does, we ignaore all data watch point here.
+	 * They can be turned on easily after future blackfin design
+	 * supports this feature.
+	 */
+	for (breakno = 0; breakno < HW_INST_WATCHPOINT_NUM; breakno++)
+		if (bfin_type == breakinfo[breakno].type
+			&& !breakinfo[breakno].occupied) {
 			breakinfo[breakno].occupied = 1;
 			breakinfo[breakno].enabled = 1;
-			breakinfo[breakno].type = 1;
 			breakinfo[breakno].addr = addr;
+			breakinfo[breakno].dataacc = dataacc;
+			breakinfo[breakno].count = 0;
 			return 0;
 		}
 
 	return -ENOSPC;
 }
 
-int kgdb_remove_hw_break(unsigned long addr)
+int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 {
 	int breakno;
-	for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++)
-		if (breakinfo[breakno].addr == addr)
-			memset(&(breakinfo[breakno]), 0, sizeof(struct hw_breakpoint));
+	int bfin_type;
+
+	switch (type) {
+	case BP_HARDWARE_BREAKPOINT:
+		bfin_type = TYPE_INST_WATCHPOINT;
+		break;
+	case BP_WRITE_WATCHPOINT:
+	case BP_READ_WATCHPOINT:
+	case BP_ACCESS_WATCHPOINT:
+		bfin_type = TYPE_DATA_WATCHPOINT;
+		break;
+	default:
+		return 0;
+	}
+	for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++)
+		if (bfin_type == breakinfo[breakno].type
+			&& breakinfo[breakno].occupied
+			&& breakinfo[breakno].addr == addr) {
+			breakinfo[breakno].occupied = 0;
+			breakinfo[breakno].enabled = 0;
+		}
 
 	return 0;
 }
 
-void kgdb_remove_all_hw_break(void)
+void bfin_remove_all_hw_break(void)
 {
-	memset(breakinfo, 0, sizeof(struct hw_breakpoint)*8);
-}
+	int breakno;
 
-/*
-void kgdb_show_info(void)
-{
-	printk(KERN_DEBUG "hwd: wpia0=0x%x, wpiacnt0=%d, wpiactl=0x%x, wpstat=0x%x\n",
-		bfin_read_WPIA0(), bfin_read_WPIACNT0(),
-		bfin_read_WPIACTL(), bfin_read_WPSTAT());
+	memset(breakinfo, 0, sizeof(struct hw_breakpoint)*HW_WATCHPOINT_NUM);
+
+	for (breakno = 0; breakno < HW_INST_WATCHPOINT_NUM; breakno++)
+		breakinfo[breakno].type = TYPE_INST_WATCHPOINT;
+	for (; breakno < HW_WATCHPOINT_NUM; breakno++)
+		breakinfo[breakno].type = TYPE_DATA_WATCHPOINT;
 }
-*/
 
-void kgdb_correct_hw_break(void)
+void bfin_correct_hw_break(void)
 {
 	int breakno;
-	int correctit;
-	uint32_t wpdactl = bfin_read_WPDACTL();
+	unsigned int wpiactl = 0;
+	unsigned int wpdactl = 0;
+	int enable_wp = 0;
+
+	for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++)
+		if (breakinfo[breakno].enabled) {
+			enable_wp = 1;
 
-	correctit = 0;
-	for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++) {
-		if (breakinfo[breakno].type == 1) {
 			switch (breakno) {
 			case 0:
-				if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN0)) {
-					correctit = 1;
-					wpdactl &= ~(WPIREN01|EMUSW0);
-					wpdactl |= WPIAEN0|WPICNTEN0;
-					bfin_write_WPIA0(breakinfo[breakno].addr);
-					bfin_write_WPIACNT0(breakinfo[breakno].skip);
-				} else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN0)) {
-					correctit = 1;
-					wpdactl &= ~WPIAEN0;
-				}
+				wpiactl |= WPIAEN0|WPICNTEN0;
+				bfin_write_WPIA0(breakinfo[breakno].addr);
+				bfin_write_WPIACNT0(breakinfo[breakno].count
+					+ breakinfo->skip);
 				break;
-
 			case 1:
-				if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN1)) {
-					correctit = 1;
-					wpdactl &= ~(WPIREN01|EMUSW1);
-					wpdactl |= WPIAEN1|WPICNTEN1;
-					bfin_write_WPIA1(breakinfo[breakno].addr);
-					bfin_write_WPIACNT1(breakinfo[breakno].skip);
-				} else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN1)) {
-					correctit = 1;
-					wpdactl &= ~WPIAEN1;
-				}
+				wpiactl |= WPIAEN1|WPICNTEN1;
+				bfin_write_WPIA1(breakinfo[breakno].addr);
+				bfin_write_WPIACNT1(breakinfo[breakno].count
+					+ breakinfo->skip);
 				break;
-
 			case 2:
-				if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN2)) {
-					correctit = 1;
-					wpdactl &= ~(WPIREN23|EMUSW2);
-					wpdactl |= WPIAEN2|WPICNTEN2;
-					bfin_write_WPIA2(breakinfo[breakno].addr);
-					bfin_write_WPIACNT2(breakinfo[breakno].skip);
-				} else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN2)) {
-					correctit = 1;
-					wpdactl &= ~WPIAEN2;
-				}
+				wpiactl |= WPIAEN2|WPICNTEN2;
+				bfin_write_WPIA2(breakinfo[breakno].addr);
+				bfin_write_WPIACNT2(breakinfo[breakno].count
+					+ breakinfo->skip);
 				break;
-
 			case 3:
-				if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN3)) {
-					correctit = 1;
-					wpdactl &= ~(WPIREN23|EMUSW3);
-					wpdactl |= WPIAEN3|WPICNTEN3;
-					bfin_write_WPIA3(breakinfo[breakno].addr);
-					bfin_write_WPIACNT3(breakinfo[breakno].skip);
-				} else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN3)) {
-					correctit = 1;
-					wpdactl &= ~WPIAEN3;
-				}
+				wpiactl |= WPIAEN3|WPICNTEN3;
+				bfin_write_WPIA3(breakinfo[breakno].addr);
+				bfin_write_WPIACNT3(breakinfo[breakno].count
+					+ breakinfo->skip);
 				break;
 			case 4:
-				if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN4)) {
-					correctit = 1;
-					wpdactl &= ~(WPIREN45|EMUSW4);
-					wpdactl |= WPIAEN4|WPICNTEN4;
-					bfin_write_WPIA4(breakinfo[breakno].addr);
-					bfin_write_WPIACNT4(breakinfo[breakno].skip);
-				} else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN4)) {
-					correctit = 1;
-					wpdactl &= ~WPIAEN4;
-				}
+				wpiactl |= WPIAEN4|WPICNTEN4;
+				bfin_write_WPIA4(breakinfo[breakno].addr);
+				bfin_write_WPIACNT4(breakinfo[breakno].count
+					+ breakinfo->skip);
 				break;
 			case 5:
-				if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN5)) {
-					correctit = 1;
-					wpdactl &= ~(WPIREN45|EMUSW5);
-					wpdactl |= WPIAEN5|WPICNTEN5;
-					bfin_write_WPIA5(breakinfo[breakno].addr);
-					bfin_write_WPIACNT5(breakinfo[breakno].skip);
-				} else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN5)) {
-					correctit = 1;
-					wpdactl &= ~WPIAEN5;
-				}
+				wpiactl |= WPIAEN5|WPICNTEN5;
+				bfin_write_WPIA5(breakinfo[breakno].addr);
+				bfin_write_WPIACNT5(breakinfo[breakno].count
+					+ breakinfo->skip);
+				break;
+			case 6:
+				wpdactl |= WPDAEN0|WPDCNTEN0|WPDSRC0;
+				wpdactl |= breakinfo[breakno].dataacc
+					<< WPDACC0_OFFSET;
+				bfin_write_WPDA0(breakinfo[breakno].addr);
+				bfin_write_WPDACNT0(breakinfo[breakno].count
+					+ breakinfo->skip);
+				break;
+			case 7:
+				wpdactl |= WPDAEN1|WPDCNTEN1|WPDSRC1;
+				wpdactl |= breakinfo[breakno].dataacc
+					<< WPDACC1_OFFSET;
+				bfin_write_WPDA1(breakinfo[breakno].addr);
+				bfin_write_WPDACNT1(breakinfo[breakno].count
+					+ breakinfo->skip);
 				break;
 			}
 		}
-	}
-	if (correctit) {
-		wpdactl &= ~WPAND;
-		wpdactl |= WPPWR;
-		/*printk("correct_hw_break: wpdactl=0x%x\n", wpdactl);*/
+
+	/* Should enable WPPWR bit first before set any other
+	 * WPIACTL and WPDACTL bits */
+	if (enable_wp) {
+		bfin_write_WPIACTL(WPPWR);
+		CSYNC();
+		bfin_write_WPIACTL(wpiactl|WPPWR);
 		bfin_write_WPDACTL(wpdactl);
 		CSYNC();
-		/*kgdb_show_info();*/
 	}
 }
 
 void kgdb_disable_hw_debug(struct pt_regs *regs)
 {
 	/* Disable hardware debugging while we are in kgdb */
-	bfin_write_WPIACTL(bfin_read_WPIACTL() & ~0x1);
+	bfin_write_WPIACTL(0);
+	bfin_write_WPDACTL(0);
 	CSYNC();
 }
 
-void kgdb_post_master_code(struct pt_regs *regs, int eVector, int err_code)
+#ifdef CONFIG_SMP
+void kgdb_passive_cpu_callback(void *info)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	smp_call_function(kgdb_passive_cpu_callback, NULL, 0, 0);
+}
+
+void kgdb_roundup_cpu(int cpu, unsigned long flags)
+{
+	smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0, 0);
+}
+#endif
+
+void kgdb_post_primary_code(struct pt_regs *regs, int eVector, int err_code)
 {
 	/* Master processor is completely in the debugger */
-	gdb_bf533vector = eVector;
-	gdb_bf533errcode = err_code;
+	gdb_bfin_vector = eVector;
+	gdb_bfin_errcode = err_code;
 }
 
-int kgdb_arch_handle_exception(int exceptionVector, int signo,
+int kgdb_arch_handle_exception(int vector, int signo,
 			       int err_code, char *remcom_in_buffer,
 			       char *remcom_out_buffer,
-			       struct pt_regs *linux_regs)
+			       struct pt_regs *regs)
 {
 	long addr;
 	long breakno;
@@ -385,44 +404,40 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
 		/* try to read optional parameter, pc unchanged if no parm */
 		ptr = &remcom_in_buffer[1];
 		if (kgdb_hex2long(&ptr, &addr)) {
-			linux_regs->retx = addr;
+			regs->retx = addr;
 		}
-		newPC = linux_regs->retx;
+		newPC = regs->retx;
 
 		/* clear the trace bit */
-		linux_regs->syscfg &= 0xfffffffe;
+		regs->syscfg &= 0xfffffffe;
 
 		/* set the trace bit if we're stepping */
 		if (remcom_in_buffer[0] == 's') {
-			linux_regs->syscfg |= 0x1;
-			debugger_step = linux_regs->ipend;
-			debugger_step >>= 6;
-			for (i = 10; i > 0; i--, debugger_step >>= 1)
-				if (debugger_step & 1)
+			regs->syscfg |= 0x1;
+			kgdb_single_step = regs->ipend;
+			kgdb_single_step >>= 6;
+			for (i = 10; i > 0; i--, kgdb_single_step >>= 1)
+				if (kgdb_single_step & 1)
 					break;
 			/* i indicate event priority of current stopped instruction
 			 * user space instruction is 0, IVG15 is 1, IVTMR is 10.
-			 * debugger_step > 0 means in single step mode
+			 * kgdb_single_step > 0 means in single step mode
 			 */
-			debugger_step = i + 1;
-		} else {
-			debugger_step = 0;
+			kgdb_single_step = i + 1;
 		}
 
-		wp_status = bfin_read_WPSTAT();
-		CSYNC();
-
-		if (exceptionVector == VEC_WATCH) {
-			for (breakno = 0; breakno < 6; ++breakno) {
+		if (vector == VEC_WATCH) {
+			wp_status = bfin_read_WPSTAT();
+			for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++) {
 				if (wp_status & (1 << breakno)) {
 					breakinfo->skip = 1;
 					break;
 				}
 			}
+			bfin_write_WPSTAT(0);
 		}
-		kgdb_correct_hw_break();
 
-		bfin_write_WPSTAT(0);
+		bfin_correct_hw_break();
 
 		return 0;
 	}			/* switch */
@@ -431,5 +446,385 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
 
 struct kgdb_arch arch_kgdb_ops = {
 	.gdb_bpt_instr = {0xa1},
+#ifdef CONFIG_SMP
+	.flags = KGDB_HW_BREAKPOINT|KGDB_THR_PROC_SWAP,
+#else
 	.flags = KGDB_HW_BREAKPOINT,
+#endif
+	.set_hw_breakpoint = bfin_set_hw_break,
+	.remove_hw_breakpoint = bfin_remove_hw_break,
+	.remove_all_hw_break = bfin_remove_all_hw_break,
+	.correct_hw_break = bfin_correct_hw_break,
 };
+
+static int hex(char ch)
+{
+	if ((ch >= 'a') && (ch <= 'f'))
+		return ch - 'a' + 10;
+	if ((ch >= '0') && (ch <= '9'))
+		return ch - '0';
+	if ((ch >= 'A') && (ch <= 'F'))
+		return ch - 'A' + 10;
+	return -1;
+}
+
+static int validate_memory_access_address(unsigned long addr, int size)
+{
+	int cpu = raw_smp_processor_id();
+
+	if (size < 0)
+		return EFAULT;
+	if (addr >= 0x1000 && (addr + size) <= physical_mem_end)
+		return 0;
+	if (addr >= SYSMMR_BASE)
+		return 0;
+	if (addr >= ASYNC_BANK0_BASE
+	   && addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)
+		return 0;
+	if (cpu == 0) {
+		if (addr >= L1_SCRATCH_START
+		   && (addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH))
+			return 0;
+#if L1_CODE_LENGTH != 0
+		if (addr >= L1_CODE_START
+		   && (addr + size <= L1_CODE_START + L1_CODE_LENGTH))
+			return 0;
+#endif
+#if L1_DATA_A_LENGTH != 0
+		if (addr >= L1_DATA_A_START
+		   && (addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH))
+			return 0;
+#endif
+#if L1_DATA_B_LENGTH != 0
+		if (addr >= L1_DATA_B_START
+		   && (addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH))
+			return 0;
+#endif
+#ifdef CONFIG_SMP
+	} else if (cpu == 1) {
+		if (addr >= COREB_L1_SCRATCH_START
+		   && (addr + size <= COREB_L1_SCRATCH_START
+		   + L1_SCRATCH_LENGTH))
+			return 0;
+# if L1_CODE_LENGTH != 0
+		if (addr >= COREB_L1_CODE_START
+		   && (addr + size <= COREB_L1_CODE_START + L1_CODE_LENGTH))
+			return 0;
+# endif
+# if L1_DATA_A_LENGTH != 0
+		if (addr >= COREB_L1_DATA_A_START
+		   && (addr + size <= COREB_L1_DATA_A_START + L1_DATA_A_LENGTH))
+			return 0;
+# endif
+# if L1_DATA_B_LENGTH != 0
+		if (addr >= COREB_L1_DATA_B_START
+		   && (addr + size <= COREB_L1_DATA_B_START + L1_DATA_B_LENGTH))
+			return 0;
+# endif
+#endif
+	}
+
+#if L2_LENGTH != 0
+	if (addr >= L2_START
+	   && addr + size <= L2_START + L2_LENGTH)
+		return 0;
+#endif
+
+	return EFAULT;
+}
+
+/*
+ * Convert the memory pointed to by mem into hex, placing result in buf.
+ * Return a pointer to the last char put in buf (null). May return an error.
+ */
+int kgdb_mem2hex(char *mem, char *buf, int count)
+{
+	char *tmp;
+	int err = 0;
+	unsigned char *pch;
+	unsigned short mmr16;
+	unsigned long mmr32;
+	int cpu = raw_smp_processor_id();
+
+	if (validate_memory_access_address((unsigned long)mem, count))
+		return EFAULT;
+
+	/*
+	 * We use the upper half of buf as an intermediate buffer for the
+	 * raw memory copy.  Hex conversion will work against this one.
+	 */
+	tmp = buf + count;
+
+	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
+		switch (count) {
+		case 2:
+			if ((unsigned int)mem % 2 == 0) {
+				mmr16 = *(unsigned short *)mem;
+				pch = (unsigned char *)&mmr16;
+				*tmp++ = *pch++;
+				*tmp++ = *pch++;
+				tmp -= 2;
+			} else
+				err = EFAULT;
+			break;
+		case 4:
+			if ((unsigned int)mem % 4 == 0) {
+				mmr32 = *(unsigned long *)mem;
+				pch = (unsigned char *)&mmr32;
+				*tmp++ = *pch++;
+				*tmp++ = *pch++;
+				*tmp++ = *pch++;
+				*tmp++ = *pch++;
+				tmp -= 4;
+			} else
+				err = EFAULT;
+			break;
+		default:
+			err = EFAULT;
+		}
+	} else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START &&
+		(unsigned int)(mem + count) <= L1_CODE_START + L1_CODE_LENGTH
+#ifdef CONFIG_SMP
+		|| cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START &&
+		(unsigned int)(mem + count) <=
+		COREB_L1_CODE_START + L1_CODE_LENGTH
+#endif
+		) {
+		/* access L1 instruction SRAM*/
+		if (dma_memcpy(tmp, mem, count) == NULL)
+			err = EFAULT;
+	} else
+		err = probe_kernel_read(tmp, mem, count);
+
+	if (!err) {
+		while (count > 0) {
+			buf = pack_hex_byte(buf, *tmp);
+			tmp++;
+			count--;
+		}
+
+		*buf = 0;
+	}
+
+	return err;
+}
+
+/*
+ * Copy the binary array pointed to by buf into mem.  Fix $, #, and
+ * 0x7d escaped with 0x7d.  Return a pointer to the character after
+ * the last byte written.
+ */
+int kgdb_ebin2mem(char *buf, char *mem, int count)
+{
+	char *tmp_old;
+	char *tmp_new;
+	unsigned short *mmr16;
+	unsigned long *mmr32;
+	int err = 0;
+	int size = 0;
+	int cpu = raw_smp_processor_id();
+
+	tmp_old = tmp_new = buf;
+
+	while (count-- > 0) {
+		if (*tmp_old == 0x7d)
+			*tmp_new = *(++tmp_old) ^ 0x20;
+		else
+			*tmp_new = *tmp_old;
+		tmp_new++;
+		tmp_old++;
+		size++;
+	}
+
+	if (validate_memory_access_address((unsigned long)mem, size))
+		return EFAULT;
+
+	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
+		switch (size) {
+		case 2:
+			if ((unsigned int)mem % 2 == 0) {
+				mmr16 = (unsigned short *)buf;
+				*(unsigned short *)mem = *mmr16;
+			} else
+				return EFAULT;
+			break;
+		case 4:
+			if ((unsigned int)mem % 4 == 0) {
+				mmr32 = (unsigned long *)buf;
+				*(unsigned long *)mem = *mmr32;
+			} else
+				return EFAULT;
+			break;
+		default:
+			return EFAULT;
+		}
+	} else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START &&
+		(unsigned int)(mem + count) < L1_CODE_START + L1_CODE_LENGTH
+#ifdef CONFIG_SMP
+		|| cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START &&
+		(unsigned int)(mem + count) <=
+		COREB_L1_CODE_START + L1_CODE_LENGTH
+#endif
+		) {
+		/* access L1 instruction SRAM */
+		if (dma_memcpy(mem, buf, size) == NULL)
+			err = EFAULT;
+	} else
+		err = probe_kernel_write(mem, buf, size);
+
+	return err;
+}
+
+/*
+ * Convert the hex array pointed to by buf into binary to be placed in mem.
+ * Return a pointer to the character AFTER the last byte written.
+ * May return an error.
+ */
+int kgdb_hex2mem(char *buf, char *mem, int count)
+{
+	char *tmp_raw;
+	char *tmp_hex;
+	unsigned short *mmr16;
+	unsigned long *mmr32;
+	int cpu = raw_smp_processor_id();
+
+	if (validate_memory_access_address((unsigned long)mem, count))
+		return EFAULT;
+
+	/*
+	 * We use the upper half of buf as an intermediate buffer for the
+	 * raw memory that is converted from hex.
+	 */
+	tmp_raw = buf + count * 2;
+
+	tmp_hex = tmp_raw - 1;
+	while (tmp_hex >= buf) {
+		tmp_raw--;
+		*tmp_raw = hex(*tmp_hex--);
+		*tmp_raw |= hex(*tmp_hex--) << 4;
+	}
+
+	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
+		switch (count) {
+		case 2:
+			if ((unsigned int)mem % 2 == 0) {
+				mmr16 = (unsigned short *)tmp_raw;
+				*(unsigned short *)mem = *mmr16;
+			} else
+				return EFAULT;
+			break;
+		case 4:
+			if ((unsigned int)mem % 4 == 0) {
+				mmr32 = (unsigned long *)tmp_raw;
+				*(unsigned long *)mem = *mmr32;
+			} else
+				return EFAULT;
+			break;
+		default:
+			return EFAULT;
+		}
+	} else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START &&
+		(unsigned int)(mem + count) <= L1_CODE_START + L1_CODE_LENGTH
+#ifdef CONFIG_SMP
+		|| cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START &&
+		(unsigned int)(mem + count) <=
+		COREB_L1_CODE_START + L1_CODE_LENGTH
+#endif
+		) {
+		/* access L1 instruction SRAM */
+		if (dma_memcpy(mem, tmp_raw, count) == NULL)
+			return EFAULT;
+	} else
+		return probe_kernel_write(mem, tmp_raw, count);
+	return 0;
+}
+
+int kgdb_validate_break_address(unsigned long addr)
+{
+	int cpu = raw_smp_processor_id();
+
+	if (addr >= 0x1000 && (addr + BREAK_INSTR_SIZE) <= physical_mem_end)
+		return 0;
+	if (addr >= ASYNC_BANK0_BASE
+	   && addr + BREAK_INSTR_SIZE <= ASYNC_BANK3_BASE + ASYNC_BANK3_BASE)
+		return 0;
+#if L1_CODE_LENGTH != 0
+	if (cpu == 0 && addr >= L1_CODE_START
+	   && addr + BREAK_INSTR_SIZE <= L1_CODE_START + L1_CODE_LENGTH)
+		return 0;
+# ifdef CONFIG_SMP
+	else if (cpu == 1 && addr >= COREB_L1_CODE_START
+	   && addr + BREAK_INSTR_SIZE <= COREB_L1_CODE_START + L1_CODE_LENGTH)
+		return 0;
+# endif
+#endif
+#if L2_LENGTH != 0
+	if (addr >= L2_START
+	   && addr + BREAK_INSTR_SIZE <= L2_START + L2_LENGTH)
+		return 0;
+#endif
+
+	return EFAULT;
+}
+
+int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
+{
+	int err;
+	int cpu = raw_smp_processor_id();
+
+	if ((cpu == 0 && (unsigned int)addr >= L1_CODE_START
+		&& (unsigned int)(addr + BREAK_INSTR_SIZE)
+		< L1_CODE_START + L1_CODE_LENGTH)
+#ifdef CONFIG_SMP
+		|| (cpu == 1 && (unsigned int)addr >= COREB_L1_CODE_START
+		&& (unsigned int)(addr + BREAK_INSTR_SIZE)
+		< COREB_L1_CODE_START + L1_CODE_LENGTH)
+#endif
+		) {
+		/* access L1 instruction SRAM */
+		if (dma_memcpy(saved_instr, (void *)addr, BREAK_INSTR_SIZE)
+			== NULL)
+			return -EFAULT;
+
+		if (dma_memcpy((void *)addr, arch_kgdb_ops.gdb_bpt_instr,
+			BREAK_INSTR_SIZE) == NULL)
+			return -EFAULT;
+
+		return 0;
+	} else {
+		err = probe_kernel_read(saved_instr, (char *)addr,
+			BREAK_INSTR_SIZE);
+		if (err)
+			return err;
+
+		return probe_kernel_write((char *)addr,
+			arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
+	}
+}
+
+int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
+{
+	if ((unsigned int)addr >= L1_CODE_START &&
+		(unsigned int)(addr + BREAK_INSTR_SIZE) <
+			L1_CODE_START + L1_CODE_LENGTH) {
+		/* access L1 instruction SRAM */
+		if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL)
+			return -EFAULT;
+
+		return 0;
+	} else
+		return probe_kernel_write((char *)addr,
+				(char *)bundle, BREAK_INSTR_SIZE);
+}
+
+int kgdb_arch_init(void)
+{
+	kgdb_single_step = 0;
+
+	bfin_remove_all_hw_break();
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+}
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index bf1a51d..140bf00 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -46,7 +46,6 @@
 #include <asm/dma.h>
 #include <asm/fixed_code.h>
 
-#define MAX_SHARED_LIBS 3
 #define TEXT_OFFSET 0
 /*
  * does not yet catch signals sent when the child dies.
@@ -161,21 +160,32 @@ static inline int is_user_addr_valid(struct task_struct *child,
 	struct vm_list_struct *vml;
 	struct sram_list_struct *sraml;
 
+	/* overflow */
+	if (start + len < start)
+		return -EIO;
+
 	for (vml = child->mm->context.vmlist; vml; vml = vml->next)
-		if (start >= vml->vma->vm_start && start + len <= vml->vma->vm_end)
+		if (start >= vml->vma->vm_start && start + len < vml->vma->vm_end)
 			return 0;
 
 	for (sraml = child->mm->context.sram_list; sraml; sraml = sraml->next)
 		if (start >= (unsigned long)sraml->addr
-		    && start + len <= (unsigned long)sraml->addr + sraml->length)
+		    && start + len < (unsigned long)sraml->addr + sraml->length)
 			return 0;
 
-	if (start >= FIXED_CODE_START && start + len <= FIXED_CODE_END)
+	if (start >= FIXED_CODE_START && start + len < FIXED_CODE_END)
 		return 0;
 
 	return -EIO;
 }
 
+void ptrace_enable(struct task_struct *child)
+{
+	unsigned long tmp;
+	tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS);
+	put_reg(child, PT_SYSCFG, tmp);
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -192,14 +202,12 @@ void ptrace_disable(struct task_struct *child)
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
-	int add = 0;
 	unsigned long __user *datap = (unsigned long __user *)data;
 
 	switch (request) {
 		/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKDATA:
 		pr_debug("ptrace: PEEKDATA\n");
-		add = MAX_SHARED_LIBS * 4;	/* space between text and data */
 		/* fall through */
 	case PTRACE_PEEKTEXT:	/* read word at location addr. */
 		{
@@ -207,40 +215,35 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			int copied;
 
 			ret = -EIO;
-			pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + add %d %ld\n", addr, add,
-			         sizeof(data));
-			if (is_user_addr_valid(child, addr + add, sizeof(tmp)) < 0)
+			pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + %ld\n", addr, sizeof(data));
+			if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0)
 				break;
 			pr_debug("ptrace: user address is valid\n");
 
-#if L1_CODE_LENGTH != 0
-			if (addr + add >= L1_CODE_START
-			    && addr + add + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) {
-				safe_dma_memcpy (&tmp, (const void *)(addr + add), sizeof(tmp));
+			if (L1_CODE_LENGTH != 0 && addr >= L1_CODE_START
+			    && addr + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) {
+				safe_dma_memcpy (&tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
-			} else
-#endif
-#if L1_DATA_A_LENGTH != 0
-			if (addr + add >= L1_DATA_A_START
-			    && addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
-				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+
+			} else if (L1_DATA_A_LENGTH != 0 && addr >= L1_DATA_A_START
+			    && addr + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
-			} else
-#endif
-#if L1_DATA_B_LENGTH != 0
-			if (addr + add >= L1_DATA_B_START
-			    && addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
-				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+
+			} else if (L1_DATA_B_LENGTH != 0 && addr >= L1_DATA_B_START
+			    && addr + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
-			} else
-#endif
-			if (addr + add >= FIXED_CODE_START
-			    && addr + add + sizeof(tmp) <= FIXED_CODE_END) {
-				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+
+			} else if (addr >= FIXED_CODE_START
+			    && addr + sizeof(tmp) <= FIXED_CODE_END) {
+				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
+
 			} else
-				copied = access_process_vm(child, addr + add, &tmp,
+				copied = access_process_vm(child, addr, &tmp,
 							   sizeof(tmp), 0);
+
 			pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
 			if (copied != sizeof(tmp))
 				break;
@@ -284,47 +287,43 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 		/* when I and D space are separate, this will have to be fixed. */
 	case PTRACE_POKEDATA:
-		printk(KERN_NOTICE "ptrace: PTRACE_PEEKDATA\n");
+		pr_debug("ptrace: PTRACE_PEEKDATA\n");
 		/* fall through */
 	case PTRACE_POKETEXT:	/* write the word at location addr. */
 		{
 			int copied;
 
 			ret = -EIO;
-			pr_debug("ptrace: POKETEXT at addr 0x%08lx + add %d %ld bytes %lx\n",
-			         addr, add, sizeof(data), data);
-			if (is_user_addr_valid(child, addr + add, sizeof(data)) < 0)
+			pr_debug("ptrace: POKETEXT at addr 0x%08lx + %ld bytes %lx\n",
+			         addr, sizeof(data), data);
+			if (is_user_addr_valid(child, addr, sizeof(data)) < 0)
 				break;
 			pr_debug("ptrace: user address is valid\n");
 
-#if L1_CODE_LENGTH != 0
-			if (addr + add >= L1_CODE_START
-			    && addr + add + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) {
-				safe_dma_memcpy ((void *)(addr + add), &data, sizeof(data));
+			if (L1_CODE_LENGTH != 0 && addr >= L1_CODE_START
+			    && addr + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) {
+				safe_dma_memcpy ((void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
-			} else
-#endif
-#if L1_DATA_A_LENGTH != 0
-			if (addr + add >= L1_DATA_A_START
-			    && addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
-				memcpy((void *)(addr + add), &data, sizeof(data));
+
+			} else if (L1_DATA_A_LENGTH != 0 && addr >= L1_DATA_A_START
+			    && addr + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy((void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
-			} else
-#endif
-#if L1_DATA_B_LENGTH != 0
-			if (addr + add >= L1_DATA_B_START
-			    && addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
-				memcpy((void *)(addr + add), &data, sizeof(data));
+
+			} else if (L1_DATA_B_LENGTH != 0 && addr >= L1_DATA_B_START
+			    && addr + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy((void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
-			} else
-#endif
-			if (addr + add >= FIXED_CODE_START
-			    && addr + add + sizeof(data) <= FIXED_CODE_END) {
-				memcpy((void *)(addr + add), &data, sizeof(data));
+
+			} else if (addr >= FIXED_CODE_START
+			    && addr + sizeof(data) <= FIXED_CODE_END) {
+				memcpy((void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
+
 			} else
-				copied = access_process_vm(child, addr + add, &data,
+				copied = access_process_vm(child, addr, &data,
 							   sizeof(data), 1);
+
 			pr_debug("ptrace: copied size %d\n", copied);
 			if (copied != sizeof(data))
 				break;
@@ -351,29 +350,22 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 	case PTRACE_SYSCALL:	/* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:
-		{		/* restart after signal. */
-			long tmp;
+	case PTRACE_CONT:	/* restart after signal. */
+		pr_debug("ptrace: syscall/cont\n");
 
-			pr_debug("ptrace_cont\n");
-
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-			child->exit_code = data;
-			/* make sure the single step bit is not set. */
-			tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
-			put_reg(child, PT_SYSCFG, tmp);
-			pr_debug("before wake_up_process\n");
-			wake_up_process(child);
-			ret = 0;
+		ret = -EIO;
+		if (!valid_signal(data))
 			break;
-		}
+		if (request == PTRACE_SYSCALL)
+			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		else
+			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		child->exit_code = data;
+		ptrace_disable(child);
+		pr_debug("ptrace: before wake_up_process\n");
+		wake_up_process(child);
+		ret = 0;
+		break;
 
 	/*
 	 * make the child exit.  Best I can do is send it a sigkill.
@@ -381,55 +373,37 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	 * exit.
 	 */
 	case PTRACE_KILL:
-		{
-			long tmp;
-			ret = 0;
-			if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-				break;
-			child->exit_code = SIGKILL;
-			/* make sure the single step bit is not set. */
-			tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
-			put_reg(child, PT_SYSCFG, tmp);
-			wake_up_process(child);
+		ret = 0;
+		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
 			break;
-		}
-
-	case PTRACE_SINGLESTEP:
-		{		/* set the trap flag. */
-			long tmp;
-
-			pr_debug("single step\n");
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-			tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS);
-			put_reg(child, PT_SYSCFG, tmp);
+		child->exit_code = SIGKILL;
+		ptrace_disable(child);
+		wake_up_process(child);
+		break;
 
-			child->exit_code = data;
-			/* give it a chance to run. */
-			wake_up_process(child);
-			ret = 0;
+	case PTRACE_SINGLESTEP:	/* set the trap flag. */
+		pr_debug("ptrace: single step\n");
+		ret = -EIO;
+		if (!valid_signal(data))
 			break;
-		}
+		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		ptrace_enable(child);
+		child->exit_code = data;
+		wake_up_process(child);
+		ret = 0;
+		break;
 
 	case PTRACE_GETREGS:
-		{
-
-			/* Get all gp regs from the child. */
-			ret = ptrace_getregs(child, datap);
-			break;
-		}
+		/* Get all gp regs from the child. */
+		ret = ptrace_getregs(child, datap);
+		break;
 
 	case PTRACE_SETREGS:
-		{
-			printk(KERN_NOTICE
-			       "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n");
-			/* Set all gp regs in the child. */
-			ret = 0;
-			break;
-		}
+		printk(KERN_WARNING "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n");
+		/* Set all gp regs in the child. */
+		ret = 0;
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -440,7 +414,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 asmlinkage void syscall_trace(void)
 {
-
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return;
 
diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c
index 367e2dc..ae97ca4 100644
--- a/arch/blackfin/kernel/reboot.c
+++ b/arch/blackfin/kernel/reboot.c
@@ -10,6 +10,7 @@
 #include <asm/bfin-global.h>
 #include <asm/reboot.h>
 #include <asm/system.h>
+#include <asm/bfrom.h>
 
 /* A system soft reset makes external memory unusable so force
  * this function into L1.  We use the compiler ssync here rather
@@ -20,7 +21,7 @@
  * the core reset.
  */
 __attribute__((l1_text))
-void bfin_reset(void)
+static void bfin_reset(void)
 {
 	/* Wait for completion of "system" events such as cache line
 	 * line fills so that we avoid infinite stalls later on as
@@ -34,15 +35,15 @@ void bfin_reset(void)
 		bfin_write_SWRST(0x7);
 
 		/* Due to the way reset is handled in the hardware, we need
-		 * to delay for 7 SCLKS.  The only reliable way to do this is
-		 * to calculate the CCLK/SCLK ratio and multiply 7.  For now,
+		 * to delay for 10 SCLKS.  The only reliable way to do this is
+		 * to calculate the CCLK/SCLK ratio and multiply 10.  For now,
 		 * we'll assume worse case which is a 1:15 ratio.
 		 */
 		asm(
 			"LSETUP (1f, 1f) LC0 = %0\n"
 			"1: nop;"
 			:
-			: "a" (15 * 7)
+			: "a" (15 * 10)
 			: "LC0", "LB0", "LT0"
 		);
 
@@ -74,7 +75,14 @@ void machine_restart(char *cmd)
 {
 	native_machine_restart(cmd);
 	local_irq_disable();
-	bfin_reset();
+	if (ANOMALY_05000353 || ANOMALY_05000386)
+		bfin_reset();
+	else
+		/* the bootrom checks to see how it was reset and will
+		 * automatically perform a software reset for us when
+		 * it starts executing boot
+		 */
+		asm("raise 1;");
 }
 
 __attribute__((weak))
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 7a82d10..7f35d10 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -42,6 +42,7 @@ EXPORT_SYMBOL(memory_start);
 EXPORT_SYMBOL(memory_end);
 EXPORT_SYMBOL(physical_mem_end);
 EXPORT_SYMBOL(_ramend);
+EXPORT_SYMBOL(reserved_mem_dcache_on);
 
 #ifdef CONFIG_MTD_UCLINUX
 unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
@@ -52,7 +53,8 @@ EXPORT_SYMBOL(mtd_size);
 #endif
 
 char __initdata command_line[COMMAND_LINE_SIZE];
-unsigned int __initdata *__retx;
+void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
+	*init_saved_icplb_fault_addr, *init_saved_dcplb_fault_addr;
 
 /* boot memmap, for parsing "memmap=" */
 #define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
@@ -77,10 +79,10 @@ static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
 static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
 static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
 
-void __init bf53x_cache_init(void)
+void __init bfin_cache_init(void)
 {
 #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
-	generate_cpl_tables();
+	generate_cplb_tables();
 #endif
 
 #ifdef CONFIG_BFIN_ICACHE
@@ -100,7 +102,7 @@ void __init bf53x_cache_init(void)
 #endif
 }
 
-void __init bf53x_relocate_l1_mem(void)
+void __init bfin_relocate_l1_mem(void)
 {
 	unsigned long l1_code_length;
 	unsigned long l1_data_a_length;
@@ -410,7 +412,7 @@ static __init void parse_cmdline_early(char *cmdline_p)
  *  [_rambase, _ramstart]:		kernel image
  *  [memory_start, memory_end]:		dynamic memory managed by kernel
  *  [memory_end, _ramend]:		reserved memory
- *  	[meory_mtd_start(memory_end),
+ *  	[memory_mtd_start(memory_end),
  *  		memory_mtd_start + mtd_size]:	rootfs (if any)
  *	[_ramend - DMA_UNCACHED_REGION,
  *		_ramend]:			uncached DMA region
@@ -782,16 +784,25 @@ void __init setup_arch(char **cmdline_p)
 
 	_bfin_swrst = bfin_read_SWRST();
 
-	/* If we double fault, reset the system - otherwise we hang forever */
-	bfin_write_SWRST(DOUBLE_FAULT);
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+	bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
+#endif
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_RESET
+	bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
+#endif
 
-	if (_bfin_swrst & RESET_DOUBLE)
-		/*
-		 * don't decode the address, since you don't know if this
-		 * kernel's symbol map is the same as the crashing kernel
-		 */
-		printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx);
-	else if (_bfin_swrst & RESET_WDOG)
+	if (_bfin_swrst & RESET_DOUBLE) {
+		printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+		/* We assume the crashing kernel, and the current symbol table match */
+		printk(KERN_EMERG " While handling exception (EXCAUSE = 0x%x) at %pF\n",
+			(int)init_saved_seqstat & SEQSTAT_EXCAUSE, init_saved_retx);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %pF\n", init_saved_dcplb_fault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %pF\n", init_saved_icplb_fault_addr);
+#endif
+		printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
+			init_retx);
+	} else if (_bfin_swrst & RESET_WDOG)
 		printk(KERN_INFO "Recovering from Watchdog event\n");
 	else if (_bfin_swrst & RESET_SOFTWARE)
 		printk(KERN_NOTICE "Reset caused by Software reset\n");
@@ -803,17 +814,24 @@ void __init setup_arch(char **cmdline_p)
 		printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
 	else
 		printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
-	if (bfin_revid() != bfin_compiled_revid()) {
-		if (bfin_compiled_revid() == -1)
-			printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
-			       bfin_revid());
-		else if (bfin_compiled_revid() != 0xffff)
-			printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
-			       bfin_compiled_revid(), bfin_revid());
+
+	if (unlikely(CPUID != bfin_cpuid()))
+		printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+			CPU, bfin_cpuid(), bfin_revid());
+	else {
+		if (bfin_revid() != bfin_compiled_revid()) {
+			if (bfin_compiled_revid() == -1)
+				printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
+				       bfin_revid());
+			else if (bfin_compiled_revid() != 0xffff)
+				printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
+				       bfin_compiled_revid(), bfin_revid());
+		}
+		if (bfin_revid() <= CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
+			printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
+			       CPU, bfin_revid());
 	}
-	if (bfin_revid() < SUPPORTED_REVID)
-		printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
-		       CPU, bfin_revid());
+
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -850,7 +868,7 @@ void __init setup_arch(char **cmdline_p)
 		!= SAFE_USER_INSTRUCTION - FIXED_CODE_START);
 
 	init_exception_vectors();
-	bf53x_cache_init();
+	bfin_cache_init();
 }
 
 static int __init topology_init(void)
@@ -986,13 +1004,18 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	}
 
 	seq_printf(m, "processor\t: %d\n"
-		"vendor_id\t: %s\n"
-		"cpu family\t: 0x%x\n"
-		"model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
+		"vendor_id\t: %s\n",
+		*(unsigned int *)v,
+		vendor);
+
+	if (CPUID == bfin_cpuid())
+		seq_printf(m, "cpu family\t: 0x%04x\n", CPUID);
+	else
+		seq_printf(m, "cpu family\t: Compiled for:0x%04x, running on:0x%04x\n",
+			CPUID, bfin_cpuid());
+
+	seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
 		"stepping\t: %d\n",
-		0,
-		vendor,
-		(bfin_read_CHIPID() & CHIPID_FAMILY),
 		cpu, cclk/1000000, sclk/1000000,
 #ifdef CONFIG_MPU
 		"mpu on",
@@ -1038,7 +1061,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
 		dcache_size = 0;
 
-	if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB))
+	if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) != (IMC | ENICPLB))
 		icache_size = 0;
 
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
@@ -1127,12 +1150,18 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
-	return *pos < NR_CPUS ? ((void *)0x12345678) : NULL;
+	if (*pos == 0)
+		*pos = first_cpu(cpu_online_map);
+	if (*pos >= num_online_cpus())
+		return NULL;
+
+	return pos;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	++*pos;
+	*pos = next_cpu(*pos, cpu_online_map);
+
 	return c_start(m, pos);
 }
 
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 9a9d508..1aa2c78 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -34,20 +34,19 @@
 #include <linux/fs.h>
 #include <asm/traps.h>
 #include <asm/cacheflush.h>
+#include <asm/cplb.h>
 #include <asm/blackfin.h>
 #include <asm/irq_handler.h>
 #include <linux/irq.h>
 #include <asm/trace.h>
 #include <asm/fixed_code.h>
-#include <asm/dma.h>
 
 #ifdef CONFIG_KGDB
-# include <linux/debugger.h>
 # include <linux/kgdb.h>
 
 # define CHK_DEBUGGER_TRAP() \
 	do { \
-		CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
+		kgdb_handle_exception(trapnr, sig, info.si_code, fp); \
 	} while (0)
 # define CHK_DEBUGGER_TRAP_MAYBE() \
 	do { \
@@ -59,6 +58,15 @@
 # define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
 #endif
 
+
+#ifdef CONFIG_VERBOSE_DEBUG
+#define verbose_printk(fmt, arg...) \
+	printk(fmt, ##arg)
+#else
+#define verbose_printk(fmt, arg...) \
+	({ if (0) printk(fmt, ##arg); 0; })
+#endif
+
 /* Initiate the event table handler */
 void __init trap_init(void)
 {
@@ -67,10 +75,19 @@ void __init trap_init(void)
 	CSYNC();
 }
 
-unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
+/*
+ * Used to save the RETX, SEQSTAT, I/D CPLB FAULT ADDR
+ * values across the transition from exception to IRQ5.
+ * We put these in L1, so they are going to be in a valid
+ * location during exception context
+ */
+__attribute__((l1_data))
+unsigned long saved_retx, saved_seqstat,
+	saved_icplb_fault_addr, saved_dcplb_fault_addr;
 
 static void decode_address(char *buf, unsigned long address)
 {
+#ifdef CONFIG_DEBUG_VERBOSE
 	struct vm_list_struct *vml;
 	struct task_struct *p;
 	struct mm_struct *mm;
@@ -178,16 +195,39 @@ static void decode_address(char *buf, unsigned long address)
 
 done:
 	write_unlock_irqrestore(&tasklist_lock, flags);
+#else
+	sprintf(buf, " ");
+#endif
 }
 
 asmlinkage void double_fault_c(struct pt_regs *fp)
 {
 	console_verbose();
 	oops_in_progress = 1;
+#ifdef CONFIG_DEBUG_VERBOSE
 	printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
-	dump_bfin_process(fp);
-	dump_bfin_mem(fp);
-	show_regs(fp);
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
+		char buf[150];
+		decode_address(buf, saved_retx);
+		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
+			(int)saved_seqstat & SEQSTAT_EXCAUSE, buf);
+		decode_address(buf, saved_dcplb_fault_addr);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
+		decode_address(buf, saved_icplb_fault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
+
+		decode_address(buf, fp->retx);
+		printk(KERN_NOTICE "The instruction at %s caused a double exception\n",
+			buf);
+	} else
+#endif
+	{
+		dump_bfin_process(fp);
+		dump_bfin_mem(fp);
+		show_regs(fp);
+	}
+#endif
 	panic("Double Fault - unrecoverable event\n");
 
 }
@@ -259,34 +299,42 @@ asmlinkage void trap_c(struct pt_regs *fp)
 			return;
 		else
 			break;
+	/* 0x03 - User Defined, userspace stack overflow */
+	case VEC_EXCPT03:
+		info.si_code = SEGV_STACKFLOW;
+		sig = SIGSEGV;
+		verbose_printk(KERN_NOTICE EXC_0x03(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
+		break;
+	/* 0x02 - KGDB initial connection and break signal trap */
+	case VEC_EXCPT02:
 #ifdef CONFIG_KGDB
-	case VEC_EXCPT02 :		 /* gdb connection */
 		info.si_code = TRAP_ILLTRAP;
 		sig = SIGTRAP;
 		CHK_DEBUGGER_TRAP();
 		return;
-#else
-	/* 0x02 - User Defined, Caught by default */
 #endif
-	/* 0x03 - User Defined, userspace stack overflow */
-	case VEC_EXCPT03:
-		info.si_code = SEGV_STACKFLOW;
-		sig = SIGSEGV;
-		printk(KERN_NOTICE EXC_0x03(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+	/* 0x04 - User Defined */
+	/* 0x05 - User Defined */
+	/* 0x06 - User Defined */
+	/* 0x07 - User Defined */
+	/* 0x08 - User Defined */
+	/* 0x09 - User Defined */
+	/* 0x0A - User Defined */
+	/* 0x0B - User Defined */
+	/* 0x0C - User Defined */
+	/* 0x0D - User Defined */
+	/* 0x0E - User Defined */
+	/* 0x0F - User Defined */
+	/* If we got here, it is most likely that someone was trying to use a
+	 * custom exception handler, and it is not actually installed properly
+	 */
+	case VEC_EXCPT04 ... VEC_EXCPT15:
+		info.si_code = ILL_ILLPARAOP;
+		sig = SIGILL;
+		verbose_printk(KERN_NOTICE EXC_0x04(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
-	/* 0x04 - User Defined, Caught by default */
-	/* 0x05 - User Defined, Caught by default */
-	/* 0x06 - User Defined, Caught by default */
-	/* 0x07 - User Defined, Caught by default */
-	/* 0x08 - User Defined, Caught by default */
-	/* 0x09 - User Defined, Caught by default */
-	/* 0x0A - User Defined, Caught by default */
-	/* 0x0B - User Defined, Caught by default */
-	/* 0x0C - User Defined, Caught by default */
-	/* 0x0D - User Defined, Caught by default */
-	/* 0x0E - User Defined, Caught by default */
-	/* 0x0F - User Defined, Caught by default */
 	/* 0x10 HW Single step, handled here */
 	case VEC_STEP:
 		info.si_code = TRAP_STEP;
@@ -301,8 +349,8 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_OVFLOW:
 		info.si_code = TRAP_TRACEFLOW;
 		sig = SIGTRAP;
-		printk(KERN_NOTICE EXC_0x11(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x11(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x12 - Reserved, Caught by default */
 	/* 0x13 - Reserved, Caught by default */
@@ -323,44 +371,43 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_UNDEF_I:
 		info.si_code = ILL_ILLOPC;
 		sig = SIGILL;
-		printk(KERN_NOTICE EXC_0x21(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x21(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x22 - Illegal Instruction Combination, handled here */
 	case VEC_ILGAL_I:
 		info.si_code = ILL_ILLPARAOP;
 		sig = SIGILL;
-		printk(KERN_NOTICE EXC_0x22(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x22(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x23 - Data CPLB protection violation, handled here */
 	case VEC_CPLB_VL:
 		info.si_code = ILL_CPLB_VI;
 		sig = SIGBUS;
-		printk(KERN_NOTICE EXC_0x23(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x23(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x24 - Data access misaligned, handled here */
 	case VEC_MISALI_D:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		printk(KERN_NOTICE EXC_0x24(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x24(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x25 - Unrecoverable Event, handled here */
 	case VEC_UNCOV:
 		info.si_code = ILL_ILLEXCPT;
 		sig = SIGILL;
-		printk(KERN_NOTICE EXC_0x25(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x25(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
 		error case is handled here */
 	case VEC_CPLB_M:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		printk(KERN_NOTICE EXC_0x26(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x26(KERN_NOTICE));
 		break;
 	/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
 	case VEC_CPLB_MHIT:
@@ -368,11 +415,11 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 		if (saved_dcplb_fault_addr < FIXED_CODE_START)
-			printk(KERN_NOTICE "NULL pointer access\n");
+			verbose_printk(KERN_NOTICE "NULL pointer access\n");
 		else
 #endif
-			printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+			verbose_printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x28 - Emulation Watchpoint, handled here */
 	case VEC_WATCH:
@@ -390,8 +437,8 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_ISTRU_VL:      /* ADSP-BF535 only (MH) */
 		info.si_code = BUS_OPFETCH;
 		sig = SIGBUS;
-		printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n");
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n");
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 #else
 	/* 0x29 - Reserved, Caught by default */
@@ -400,22 +447,21 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_MISALI_I:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2B - Instruction CPLB protection violation, handled here */
 	case VEC_CPLB_I_VL:
 		info.si_code = ILL_CPLB_VI;
 		sig = SIGBUS;
-		printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
 	case VEC_CPLB_I_M:
 		info.si_code = ILL_CPLB_MISS;
 		sig = SIGBUS;
-		printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE));
 		break;
 	/* 0x2D - Instruction CPLB Multiple Hits, handled here */
 	case VEC_CPLB_I_MHIT:
@@ -423,18 +469,18 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 		if (saved_icplb_fault_addr < FIXED_CODE_START)
-			printk(KERN_NOTICE "Jump to NULL address\n");
+			verbose_printk(KERN_NOTICE "Jump to NULL address\n");
 		else
 #endif
-			printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+			verbose_printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2E - Illegal use of Supervisor Resource, handled here */
 	case VEC_ILL_RES:
 		info.si_code = ILL_PRVOPC;
 		sig = SIGILL;
-		printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE));
-		CHK_DEBUGGER_TRAP();
+		verbose_printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE));
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2F - Reserved, Caught by default */
 	/* 0x30 - Reserved, Caught by default */
@@ -461,17 +507,17 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR):
 			info.si_code = BUS_ADRALN;
 			sig = SIGBUS;
-			printk(KERN_NOTICE HWC_x2(KERN_NOTICE));
+			verbose_printk(KERN_NOTICE HWC_x2(KERN_NOTICE));
 			break;
 		/* External Memory Addressing Error */
 		case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
 			info.si_code = BUS_ADRERR;
 			sig = SIGBUS;
-			printk(KERN_NOTICE HWC_x3(KERN_NOTICE));
+			verbose_printk(KERN_NOTICE HWC_x3(KERN_NOTICE));
 			break;
 		/* Performance Monitor Overflow */
 		case (SEQSTAT_HWERRCAUSE_PERF_FLOW):
-			printk(KERN_NOTICE HWC_x12(KERN_NOTICE));
+			verbose_printk(KERN_NOTICE HWC_x12(KERN_NOTICE));
 			break;
 		/* RAISE 5 instruction */
 		case (SEQSTAT_HWERRCAUSE_RAISE_5):
@@ -481,21 +527,25 @@ asmlinkage void trap_c(struct pt_regs *fp)
 			printk(KERN_NOTICE HWC_default(KERN_NOTICE));
 			break;
 		}
-		CHK_DEBUGGER_TRAP();
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
+	/*
+	 * We should be handling all known exception types above,
+	 * if we get here we hit a reserved one, so panic
+	 */
 	default:
-		info.si_code = TRAP_ILLTRAP;
-		sig = SIGTRAP;
-		printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
+		oops_in_progress = 1;
+		info.si_code = ILL_ILLPARAOP;
+		sig = SIGILL;
+		verbose_printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
 			(fp->seqstat & SEQSTAT_EXCAUSE));
-		CHK_DEBUGGER_TRAP();
+		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	}
 
 	BUG_ON(sig == 0);
 
 	if (sig != SIGTRAP) {
-		unsigned long *stack;
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
@@ -503,7 +553,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		/* Print out the trace buffer if it makes sense */
 #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
 		if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
-			printk(KERN_NOTICE "No trace since you do not have "
+			verbose_printk(KERN_NOTICE "No trace since you do not have "
 				"CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
 				KERN_NOTICE "\n");
 		else
@@ -512,20 +562,22 @@ asmlinkage void trap_c(struct pt_regs *fp)
 
 		if (oops_in_progress) {
 			/* Dump the current kernel stack */
-			printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+			verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
 			show_stack(current, NULL);
-
 			print_modules();
 #ifndef CONFIG_ACCESS_CHECK
-			printk(KERN_EMERG "Please turn on "
+			verbose_printk(KERN_EMERG "Please turn on "
 			       "CONFIG_ACCESS_CHECK\n");
 #endif
 			panic("Kernel exception");
 		} else {
+#ifdef CONFIG_VERBOSE_DEBUG
+			unsigned long *stack;
 			/* Dump the user space stack */
 			stack = (unsigned long *)rdusp();
-			printk(KERN_NOTICE "Userspace Stack\n");
+			verbose_printk(KERN_NOTICE "Userspace Stack\n");
 			show_stack(NULL, stack);
+#endif
 		}
 	}
 
@@ -546,7 +598,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
  * Similar to get_user, do some address checking, then dereference
  * Return true on sucess, false on bad address
  */
-bool get_instruction(unsigned short *val, unsigned short *address)
+static bool get_instruction(unsigned short *val, unsigned short *address)
 {
 
 	unsigned long addr;
@@ -592,7 +644,7 @@ bool get_instruction(unsigned short *val, unsigned short *address)
 
 #if L1_CODE_LENGTH != 0
 	if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
-		dma_memcpy(val, address, 2);
+		isram_memcpy(val, address, 2);
 		return true;
 	}
 #endif
@@ -607,45 +659,48 @@ bool get_instruction(unsigned short *val, unsigned short *address)
  * These are the normal instructions which cause change of flow, which
  * would be at the source of the trace buffer
  */
-void decode_instruction(unsigned short *address)
+#ifdef CONFIG_DEBUG_VERBOSE
+static void decode_instruction(unsigned short *address)
 {
 	unsigned short opcode;
 
 	if (get_instruction(&opcode, address)) {
 		if (opcode == 0x0010)
-			printk("RTS");
+			verbose_printk("RTS");
 		else if (opcode == 0x0011)
-			printk("RTI");
+			verbose_printk("RTI");
 		else if (opcode == 0x0012)
-			printk("RTX");
+			verbose_printk("RTX");
 		else if (opcode >= 0x0050 && opcode <= 0x0057)
-			printk("JUMP (P%i)", opcode & 7);
+			verbose_printk("JUMP (P%i)", opcode & 7);
 		else if (opcode >= 0x0060 && opcode <= 0x0067)
-			printk("CALL (P%i)", opcode & 7);
+			verbose_printk("CALL (P%i)", opcode & 7);
 		else if (opcode >= 0x0070 && opcode <= 0x0077)
-			printk("CALL (PC+P%i)", opcode & 7);
+			verbose_printk("CALL (PC+P%i)", opcode & 7);
 		else if (opcode >= 0x0080 && opcode <= 0x0087)
-			printk("JUMP (PC+P%i)", opcode & 7);
+			verbose_printk("JUMP (PC+P%i)", opcode & 7);
 		else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
-			printk("IF !CC JUMP");
+			verbose_printk("IF !CC JUMP");
 		else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
-			printk("IF CC JUMP");
+			verbose_printk("IF CC JUMP");
 		else if (opcode >= 0x2000 && opcode <= 0x2fff)
-			printk("JUMP.S");
+			verbose_printk("JUMP.S");
 		else if (opcode >= 0xe080 && opcode <= 0xe0ff)
-			printk("LSETUP");
+			verbose_printk("LSETUP");
 		else if (opcode >= 0xe200 && opcode <= 0xe2ff)
-			printk("JUMP.L");
+			verbose_printk("JUMP.L");
 		else if (opcode >= 0xe300 && opcode <= 0xe3ff)
-			printk("CALL pcrel");
+			verbose_printk("CALL pcrel");
 		else
-			printk("0x%04x", opcode);
+			verbose_printk("0x%04x", opcode);
 	}
 
 }
+#endif
 
 void dump_bfin_trace_buffer(void)
 {
+#ifdef CONFIG_DEBUG_VERBOSE
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int tflags, i = 0;
 	char buf[150];
@@ -701,6 +756,7 @@ void dump_bfin_trace_buffer(void)
 
 	trace_buffer_restore(tflags);
 #endif
+#endif
 }
 EXPORT_SYMBOL(dump_bfin_trace_buffer);
 
@@ -708,7 +764,7 @@ EXPORT_SYMBOL(dump_bfin_trace_buffer);
  * Checks to see if the address pointed to is either a
  * 16-bit CALL instruction, or a 32-bit CALL instruction
  */
-bool is_bfin_call(unsigned short *addr)
+static bool is_bfin_call(unsigned short *addr)
 {
 	unsigned short opcode = 0, *ins_addr;
 	ins_addr = (unsigned short *)addr;
@@ -730,8 +786,10 @@ bool is_bfin_call(unsigned short *addr)
 	return false;
 
 }
+
 void show_stack(struct task_struct *task, unsigned long *stack)
 {
+#ifdef CONFIG_PRINTK
 	unsigned int *addr, *endstack, *fp = 0, *frame;
 	unsigned short *ins_addr;
 	char buf[150];
@@ -756,8 +814,10 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	} else
 		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
 
+	printk(KERN_NOTICE "Stack info:\n");
 	decode_address(buf, (unsigned int)stack);
-	printk(KERN_NOTICE "Stack info:\n" KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+
 	addr = (unsigned int *)((unsigned int)stack & ~0x3F);
 
 	/* First thing is to look for a frame pointer */
@@ -848,7 +908,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 		if (!j)
 			printk("\n");
 	}
-
+#endif
 }
 
 void dump_stack(void)
@@ -866,38 +926,39 @@ EXPORT_SYMBOL(dump_stack);
 
 void dump_bfin_process(struct pt_regs *fp)
 {
+#ifdef CONFIG_DEBUG_VERBOSE
 	/* We should be able to look at fp->ipend, but we don't push it on the
 	 * stack all the time, so do this until we fix that */
 	unsigned int context = bfin_read_IPEND();
 
 	if (oops_in_progress)
-		printk(KERN_EMERG "Kernel OOPS in progress\n");
+		verbose_printk(KERN_EMERG "Kernel OOPS in progress\n");
 
 	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
-		printk(KERN_NOTICE "HW Error context\n");
+		verbose_printk(KERN_NOTICE "HW Error context\n");
 	else if (context & 0x0020)
-		printk(KERN_NOTICE "Deferred Exception context\n");
+		verbose_printk(KERN_NOTICE "Deferred Exception context\n");
 	else if (context & 0x3FC0)
-		printk(KERN_NOTICE "Interrupt context\n");
+		verbose_printk(KERN_NOTICE "Interrupt context\n");
 	else if (context & 0x4000)
-		printk(KERN_NOTICE "Deferred Interrupt context\n");
+		verbose_printk(KERN_NOTICE "Deferred Interrupt context\n");
 	else if (context & 0x8000)
-		printk(KERN_NOTICE "Kernel process context\n");
+		verbose_printk(KERN_NOTICE "Kernel process context\n");
 
 	/* Because we are crashing, and pointers could be bad, we check things
 	 * pretty closely before we use them
 	 */
 	if ((unsigned long)current >= FIXED_CODE_START &&
 	    !((unsigned long)current & 0x3) && current->pid) {
-		printk(KERN_NOTICE "CURRENT PROCESS:\n");
+		verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n");
 		if (current->comm >= (char *)FIXED_CODE_START)
-			printk(KERN_NOTICE "COMM=%s PID=%d\n",
+			verbose_printk(KERN_NOTICE "COMM=%s PID=%d\n",
 				current->comm, current->pid);
 		else
-			printk(KERN_NOTICE "COMM= invalid\n");
+			verbose_printk(KERN_NOTICE "COMM= invalid\n");
 
 		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
-			printk(KERN_NOTICE  "TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
+			verbose_printk(KERN_NOTICE  "TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
 				KERN_NOTICE " BSS = 0x%p-0x%p  USER-STACK = 0x%p\n"
 				KERN_NOTICE "\n",
 				(void *)current->mm->start_code,
@@ -908,38 +969,40 @@ void dump_bfin_process(struct pt_regs *fp)
 				(void *)current->mm->brk,
 				(void *)current->mm->start_stack);
 		else
-			printk(KERN_NOTICE "invalid mm\n");
+			verbose_printk(KERN_NOTICE "invalid mm\n");
 	} else
-		printk(KERN_NOTICE "\n" KERN_NOTICE
+		verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
 		     "No Valid process in current context\n");
+#endif
 }
 
 void dump_bfin_mem(struct pt_regs *fp)
 {
+#ifdef CONFIG_DEBUG_VERBOSE
 	unsigned short *addr, *erraddr, val = 0, err = 0;
 	char sti = 0, buf[6];
 
 	erraddr = (void *)fp->pc;
 
-	printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);
+	verbose_printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);
 
 	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
 	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
 	     addr++) {
 		if (!((unsigned long)addr & 0xF))
-			printk("\n" KERN_NOTICE "0x%p: ", addr);
+			verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
 
-		if (get_instruction(&val, addr)) {
+		if (!get_instruction(&val, addr)) {
 				val = 0;
 				sprintf(buf, "????");
 		} else
 			sprintf(buf, "%04x", val);
 
 		if (addr == erraddr) {
-			printk("[%s]", buf);
+			verbose_printk("[%s]", buf);
 			err = val;
 		} else
-			printk(" %s ", buf);
+			verbose_printk(" %s ", buf);
 
 		/* Do any previous instructions turn on interrupts? */
 		if (addr <= erraddr &&				/* in the past */
@@ -948,14 +1011,14 @@ void dump_bfin_mem(struct pt_regs *fp)
 			sti = 1;
 	}
 
-	printk("\n");
+	verbose_printk("\n");
 
 	/* Hardware error interrupts can be deferred */
 	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
 	    oops_in_progress)){
-		printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
+		verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
 #ifndef CONFIG_DEBUG_HWERR
-		printk(KERN_NOTICE "The remaining message may be meaningless\n"
+		verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
 			KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
 			 " better idea where it came from\n");
 #else
@@ -969,34 +1032,47 @@ void dump_bfin_mem(struct pt_regs *fp)
 			/* And the last RETI points to the current userspace context */
 			if ((fp + 1)->pc >= current->mm->start_code &&
 			    (fp + 1)->pc <= current->mm->end_code) {
-				printk(KERN_NOTICE "It might be better to look around here : \n");
-				printk(KERN_NOTICE "-------------------------------------------\n");
+				verbose_printk(KERN_NOTICE "It might be better to look around here : \n");
+				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
 				show_regs(fp + 1);
-				printk(KERN_NOTICE "-------------------------------------------\n");
+				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
 			}
 		}
 #endif
 	}
+#endif
 }
 
 void show_regs(struct pt_regs *fp)
 {
+#ifdef CONFIG_DEBUG_VERBOSE
 	char buf [150];
 	struct irqaction *action;
 	unsigned int i;
 	unsigned long flags;
 
-	printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
-	printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
+	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
 		(long)fp->seqstat, fp->ipend, fp->syscfg);
-	printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
-		(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
-	printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
+	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
+		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
+			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
+#ifdef EBIU_ERRMST
+		/* If the error was from the EBIU, print it out */
+		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
+			verbose_printk(KERN_NOTICE "  EBIU Error Reason  : 0x%04x\n",
+				bfin_read_EBIU_ERRMST());
+			verbose_printk(KERN_NOTICE "  EBIU Error Address : 0x%08x\n",
+				bfin_read_EBIU_ERRADD());
+		}
+#endif
+	}
+	verbose_printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
 		fp->seqstat & SEQSTAT_EXCAUSE);
 	for (i = 6; i <= 15 ; i++) {
 		if (fp->ipend & (1 << i)) {
 			decode_address(buf, bfin_read32(EVT0 + 4*i));
-			printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
+			verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
 		}
 	}
 
@@ -1009,64 +1085,65 @@ void show_regs(struct pt_regs *fp)
 				goto unlock;
 
 			decode_address(buf, (unsigned int)action->handler);
-			printk(KERN_NOTICE "  logical irq %3d mapped  : %s", i, buf);
+			verbose_printk(KERN_NOTICE "  logical irq %3d mapped  : %s", i, buf);
 			for (action = action->next; action; action = action->next) {
 				decode_address(buf, (unsigned int)action->handler);
-				printk(", %s", buf);
+				verbose_printk(", %s", buf);
 			}
-			printk("\n");
+			verbose_printk("\n");
 unlock:
 			spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 		}
 	}
 
 	decode_address(buf, fp->rete);
-	printk(KERN_NOTICE " RETE: %s\n", buf);
+	verbose_printk(KERN_NOTICE " RETE: %s\n", buf);
 	decode_address(buf, fp->retn);
-	printk(KERN_NOTICE " RETN: %s\n", buf);
+	verbose_printk(KERN_NOTICE " RETN: %s\n", buf);
 	decode_address(buf, fp->retx);
-	printk(KERN_NOTICE " RETX: %s\n", buf);
+	verbose_printk(KERN_NOTICE " RETX: %s\n", buf);
 	decode_address(buf, fp->rets);
-	printk(KERN_NOTICE " RETS: %s\n", buf);
+	verbose_printk(KERN_NOTICE " RETS: %s\n", buf);
 	decode_address(buf, fp->pc);
-	printk(KERN_NOTICE " PC  : %s\n", buf);
+	verbose_printk(KERN_NOTICE " PC  : %s\n", buf);
 
 	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
 	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
 		decode_address(buf, saved_dcplb_fault_addr);
-		printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
+		verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
 		decode_address(buf, saved_icplb_fault_addr);
-		printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
+		verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
 	}
 
-	printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
-	printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
+	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+	verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
 		fp->r0, fp->r1, fp->r2, fp->r3);
-	printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
+	verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
 		fp->r4, fp->r5, fp->r6, fp->r7);
-	printk(KERN_NOTICE " P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
+	verbose_printk(KERN_NOTICE " P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
 		fp->p0, fp->p1, fp->p2, fp->p3);
-	printk(KERN_NOTICE " P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
+	verbose_printk(KERN_NOTICE " P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
 		fp->p4, fp->p5, fp->fp, (long)fp);
-	printk(KERN_NOTICE " LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
+	verbose_printk(KERN_NOTICE " LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
 		fp->lb0, fp->lt0, fp->lc0);
-	printk(KERN_NOTICE " LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
+	verbose_printk(KERN_NOTICE " LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
 		fp->lb1, fp->lt1, fp->lc1);
-	printk(KERN_NOTICE " B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
+	verbose_printk(KERN_NOTICE " B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
 		fp->b0, fp->l0, fp->m0, fp->i0);
-	printk(KERN_NOTICE " B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
+	verbose_printk(KERN_NOTICE " B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
 		fp->b1, fp->l1, fp->m1, fp->i1);
-	printk(KERN_NOTICE " B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
+	verbose_printk(KERN_NOTICE " B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
 		fp->b2, fp->l2, fp->m2, fp->i2);
-	printk(KERN_NOTICE " B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
+	verbose_printk(KERN_NOTICE " B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
 		fp->b3, fp->l3, fp->m3, fp->i3);
-	printk(KERN_NOTICE "A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
+	verbose_printk(KERN_NOTICE "A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
 		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
 
-	printk(KERN_NOTICE "USP : %08lx  ASTAT: %08lx\n",
+	verbose_printk(KERN_NOTICE "USP : %08lx  ASTAT: %08lx\n",
 		rdusp(), fp->astat);
 
-	printk(KERN_NOTICE "\n");
+	verbose_printk(KERN_NOTICE "\n");
+#endif
 }
 
 #ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
index 8bf9e58..df224d0 100644
--- a/arch/blackfin/mach-bf527/boards/Kconfig
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -14,4 +14,9 @@ config BFIN527_BLUETECHNIX_CM
 	help
 	  CM-BF527 support for EVAL- and DEV-Board.
 
+config BFIN526_EZBRD
+	bool "BF526-EZBRD"
+	help
+	  BF526-EZBRD/EZKIT Lite board support.
+
 endchoice
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index 7ba7d25..eb6ed33 100644
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
+obj-$(CONFIG_BFIN526_EZBRD)            += ezbrd.o
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index d22bc77..9ea440b 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -43,10 +43,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
-#include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
@@ -130,6 +127,16 @@ static struct resource musb_resources[] = {
 	},
 };
 
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 7,
+	.dma_channels	= 7,
+	.gpio_vrsel	= GPIO_PF11,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -138,7 +145,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 	.mode		= MUSB_PERIPHERAL,
 #endif
-	.multipoint	= 0,
+	.config		= &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;
@@ -201,7 +208,7 @@ static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
 		.offset = 0,
-		.size = 4 * SIZE_1M,
+		.size = 4 * 1024 * 1024,
 	},
 	{
 		.name = "file system(nand)",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
new file mode 100644
index 0000000..36c87b6
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -0,0 +1,734 @@
+/*
+ * File:         arch/blackfin/mach-bf527/boards/ezbrd.c
+ * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BF526-EZBRD";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 7,
+	.dma_channels	= 7,
+	.gpio_vrsel	= GPIO_PG13,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb_hdrc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezbrd_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezbrd_flash_data = {
+	.width      = 2,
+	.parts      = ezbrd_partitions,
+	.nr_parts   = ARRAY_SIZE(ezbrd_partitions),
+};
+
+static struct resource ezbrd_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x203fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezbrd_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezbrd_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezbrd_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "linux kernel(nand)",
+		.offset = 0,
+		.size = 4 * 1024 * 1024,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.page_size = NFC_PG_SIZE_256,
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = NFC_CTL,
+		.end = NFC_DATA_RD + 2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+	.ctl_reg	= 0x4, /* send zero */
+	.enable_dma	= 0,
+	.bits_per_word	= 8,
+	.cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_PBX)
+	{
+		.modalias = "fxs-spi",
+		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 8 - CONFIG_J11_JUMPER,
+		.controller_data = &spi_si3xxx_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "fxo-spi",
+		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 8 - CONFIG_J19_JUMPER,
+		.controller_data = &spi_si3xxx_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+		.controller_data = &spi_ad7877_chip_info,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.controller_data = &spi_wm8731_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &lq035q1_spi_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = IRQ_PF8,
+	},
+#endif
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = 	LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.use_bl = 	1,
+	.gpio_bl =	GPIO_PG12,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource 	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+	&bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+	&musb_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	&bfin_lq035q1_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ezbrd_flash_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init stamp_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_gpio_reset_spi0_ssel1();
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+	/* the MAC is stored in OTP memory page 0xDF */
+	u32 ret;
+	u64 otp_mac;
+	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+	ret = otp_read(0xDF, 0x00, &otp_mac);
+	if (!(ret & 0x1)) {
+		char *otp_mac_p = (char *)&otp_mac;
+		for (ret = 0; ret < 6; ++ret)
+			addr[ret] = otp_mac_p[5 - ret];
+	}
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 762f754..8ee2b74 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -42,10 +42,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
-#include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
@@ -129,6 +126,16 @@ static struct resource musb_resources[] = {
 	},
 };
 
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 7,
+	.dma_channels	= 7,
+	.gpio_vrsel	= GPIO_PG13,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -137,7 +144,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 	.mode		= MUSB_PERIPHERAL,
 #endif
-	.multipoint	= 0,
+	.config		= &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;
@@ -218,7 +225,7 @@ static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
 		.offset = 0,
-		.size = 4 * SIZE_1M,
+		.size = 4 * 1024 * 1024,
 	},
 	{
 		.name = "file system(nand)",
@@ -846,6 +853,38 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#include <linux/input.h>
+#include <asm/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+	/*.rotary_up_key     = KEY_UP,*/
+	/*.rotary_down_key   = KEY_DOWN,*/
+	.rotary_rel_code   = REL_WHEEL,
+	.rotary_button_key = KEY_ENTER,
+	.debounce	   = 10,	/* 0..17 */
+	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
+};
+
+static struct resource bfin_rotary_resources[] = {
+	{
+		.start = IRQ_CNT,
+		.end = IRQ_CNT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_rotary_device = {
+	.name		= "bfin-rotary",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
+	.resource 	= bfin_rotary_resources,
+	.dev		= {
+		.platform_data = &bfin_rotary_data,
+	},
+};
+#endif
+
 static struct resource bfin_gpios_resources = {
 	.start = 0,
 	.end   = MAX_BLACKFIN_GPIOS - 1,
@@ -962,6 +1001,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_device_gpiokeys,
 #endif
 
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+	&bfin_rotary_device,
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif
diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S
index 28c4861..0eb1da8 100644
--- a/arch/blackfin/mach-bf527/head.S
+++ b/arch/blackfin/mach-bf527/head.S
@@ -87,6 +87,9 @@ ENTRY(_start_dma_code)
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */
+#ifdef ANOMALY_05000265
+	BITSET(r0, 15);                  /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
 
 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index b7b166f..62373e6 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -7,12 +7,24 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List
+ *  - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision E, 08/18/2008; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
+#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+# define ANOMALY_BF526 1
+#else
+# define ANOMALY_BF526 0
+#endif
+#if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__)
+# define ANOMALY_BF527 1
+#else
+# define ANOMALY_BF527 0
+#endif
+
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
@@ -23,68 +35,124 @@
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
-/* New Feature: EMAC TX DMA Word Alignment */
-#define ANOMALY_05000285 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
 /* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (1)
+#define ANOMALY_05000312 (ANOMALY_BF527)
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 2)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (1)
+#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (1)
+#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (1)
+#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (1)
+#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (1)
+#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0xE510
 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (1)
+#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Security Features Are Not Functional */
-#define ANOMALY_05000348 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+#define ANOMALY_05000353 (ANOMALY_BF526)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (1)
+#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
+#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (__SILICON_REVISION__ > 0)
+#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1)
 /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
 #define ANOMALY_05000366 (1)
-/* New Feature: Higher Default CCLK Rate */
-#define ANOMALY_05000368 (1)
+/* Incorrect Default CSEL Value in PLL_DIV */
+#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (__SILICON_REVISION__ > 0)
+#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (1)
-/* USB Full-speed Mode not Fully Tested */
-#define ANOMALY_05000381 (1)
-/* New Feature: Boot from OTP Memory */
-#define ANOMALY_05000385 (1)
-/* New Feature: bfrom_SysControl() Routine */
-#define ANOMALY_05000386 (1)
-/* New Feature: Programmable Preboot Settings */
-#define ANOMALY_05000387 (1)
+#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (__SILICON_REVISION__ < 2)
+/* Host Must Not Read Back During Host DMA Boot */
+#define ANOMALY_05000384 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (__SILICON_REVISION__ < 2)
 /* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (1)
-/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (1)
-/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (1)
-/* New Feature: Log Buffer Functionality */
-#define ANOMALY_05000394 (1)
-/* New Feature: Hook Routine Functionality */
-#define ANOMALY_05000395 (1)
-/* New Feature: Header Indirect Bit */
-#define ANOMALY_05000396 (1)
-/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */
-#define ANOMALY_05000397 (1)
-/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */
-#define ANOMALY_05000398 (1)
-/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */
-#define ANOMALY_05000399 (1)
+#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
+#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
+#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (1)
+#define ANOMALY_05000401 (__SILICON_REVISION__ < 2)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+/* Incorrect Default Internal Voltage Regulator Setting */
+#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+/* DEB2_URGENT Bit Not Functional */
+#define ANOMALY_05000415 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
+#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
+#define ANOMALY_05000418 (__SILICON_REVISION__ < 2)
+/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
+#define ANOMALY_05000420 (__SILICON_REVISION__ < 2)
+/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
+#define ANOMALY_05000421 (1)
+/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
+#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
+#define ANOMALY_05000423 (__SILICON_REVISION__ < 2)
+/* Internal Voltage Regulator Not Trimmed */
+#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
+#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
+#define ANOMALY_05000432 (ANOMALY_BF526)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -97,6 +165,8 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000285 (0)
+#define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
index 056eb4b..144f08d 100644
--- a/arch/blackfin/mach-bf527/include/mach/bf527.h
+++ b/arch/blackfin/mach-bf527/include/mach/bf527.h
@@ -30,8 +30,6 @@
 #ifndef __MACH_BF527_H__
 #define __MACH_BF527_H__
 
-#define SUPPORTED_REVID 2
-
 #define OFFSET_(x) ((x) & 0x0000FFFF)
 
 /*some misc defines*/
@@ -112,16 +110,31 @@
 
 #ifdef CONFIG_BF527
 #define CPU "BF527"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF526
+#define CPU "BF526"
+#define CPUID 0x27e4
 #endif
 #ifdef CONFIG_BF525
 #define CPU "BF525"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF524
+#define CPU "BF524"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF523
+#define CPU "BF523"
+#define CPUID 0x27e4
 #endif
 #ifdef CONFIG_BF522
 #define CPU "BF522"
+#define CPUID 0x27e4
 #endif
+
 #ifndef CPU
-#define	CPU "UNKNOWN"
-#define CPUID 0x0
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
 #endif
 
 #endif				/* __MACH_BF527_H__  */
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 2526b6e..75722d6 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -78,6 +78,9 @@
 #  define CONFIG_UART1_RTS_PIN -1
 # endif
 #endif
+
+#define BFIN_UART_TX_FIFO_SIZE	2
+
 /*
  * The pin configuration is different from schematic
  */
@@ -119,7 +122,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
 }
 
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
 	unsigned long uart_base_addr;
 	int uart_irq;
@@ -164,8 +166,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
 #endif
 };
 
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
 #define DRIVER_NAME "bfin-uart"
 
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index 6ac2ed7..68b55d0 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -1840,6 +1840,33 @@
 
 #define                 DPRESCALE  0xf        /* Load Counter Register */
 
+/* CNT_COMMAND bit field options */
+
+#define W1LCNT_ZERO   0x0001   /* write 1 to load CNT_COUNTER with zero */
+#define W1LCNT_MIN    0x0004   /* write 1 to load CNT_COUNTER from CNT_MIN */
+#define W1LCNT_MAX    0x0008   /* write 1 to load CNT_COUNTER from CNT_MAX */
+
+#define W1LMIN_ZERO   0x0010   /* write 1 to load CNT_MIN with zero */
+#define W1LMIN_CNT    0x0020   /* write 1 to load CNT_MIN from CNT_COUNTER */
+#define W1LMIN_MAX    0x0080   /* write 1 to load CNT_MIN from CNT_MAX */
+
+#define W1LMAX_ZERO   0x0100   /* write 1 to load CNT_MAX with zero */
+#define W1LMAX_CNT    0x0200   /* write 1 to load CNT_MAX from CNT_COUNTER */
+#define W1LMAX_MIN    0x0400   /* write 1 to load CNT_MAX from CNT_MIN */
+
+/* CNT_CONFIG bit field options */
+
+#define CNTMODE_QUADENC  0x0000  /* quadrature encoder mode */
+#define CNTMODE_BINENC   0x0100  /* binary encoder mode */
+#define CNTMODE_UDCNT    0x0200  /* up/down counter mode */
+#define CNTMODE_DIRCNT   0x0400  /* direction counter mode */
+#define CNTMODE_DIRTMR   0x0500  /* direction timer mode */
+
+#define BNDMODE_COMP     0x0000  /* boundary compare mode */
+#define BNDMODE_ZERO     0x1000  /* boundary compare and zero mode */
+#define BNDMODE_CAPT     0x2000  /* boundary capture mode */
+#define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
+
 /* Bit masks for OTP_CONTROL */
 
 #define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
index ae4d205..7f6da2c3 100644
--- a/arch/blackfin/mach-bf527/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf527/include/mach/portmux.h
@@ -67,6 +67,10 @@
 #define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
 #endif
 
+#define P_CNT_CZM	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(3))
+#define P_CNT_CDG	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(3))
+#define P_CNT_CUD	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(3))
+
 #define P_HWAIT		(P_DONTCARE)
 
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index c66a68f..72ac3ac 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -9,7 +9,7 @@
  * Modified:
  *               Copyright 2005 National ICT Australia (NICTA)
  *               Copyright 2004-2006 Analog Devices Inc
- *		 Copyright 2007 HV Sistemas S.L.
+ *		 Copyright 2007,2008 HV Sistemas S.L.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -64,18 +64,18 @@ static struct platform_device rtc_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x20300000,
-		.end	= 0x20300000 + 1,
+		.end	= 0x20300002,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 0x20300000 + 4,
-		.end	= 0x20300000 + 5,
+		.start	= 0x20300004,
+		.end	= 0x20300006,
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
 		.start	= IRQ_PF10,
 		.end	= IRQ_PF10,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IRQF_SHARED | IRQF_TRIGGER_HIGH),
 	},
 };
 
@@ -140,18 +140,22 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader(spi)",
-		.size = 0x00060000,
+		.name = "bootloader (spi)",
+		.size = 0x40000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel(spi)",
-		.size = 0x100000,
-		.offset = 0x60000
+		.name = "fpga (spi)",
+		.size =   0x30000,
+		.offset = 0x40000
 	}, {
-		.name = "file system(spi)",
-		.size = 0x6a0000,
-		.offset = 0x00160000,
+		.name = "linux kernel (spi)",
+		.size =   0x150000,
+		.offset =  0x70000
+	}, {
+		.name = "jffs2 root file system (spi)",
+		.size =   0x640000,
+		.offset = 0x1c0000,
 	}
 };
 
@@ -340,7 +344,7 @@ static struct platform_device bfin_sir_device = {
 
 static struct plat_serial8250_port serial8250_platform_data [] = {
 	{
-		.membase = 0x20200000,
+		.membase = (void *)0x20200000,
 		.mapbase = 0x20200000,
 		.irq = IRQ_PF8,
 		.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
@@ -348,7 +352,7 @@ static struct plat_serial8250_port serial8250_platform_data [] = {
 		.regshift = 1,
 		.uartclk = 66666667,
 	}, {
-		.membase = 0x20200010,
+		.membase = (void *)0x20200010,
 		.mapbase = 0x20200010,
 		.irq = IRQ_PF8,
 		.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 01b2b7e..9fc95aa 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -78,6 +78,9 @@ ENTRY(_start_dma_code)
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */
+#ifdef ANOMALY_05000265
+	BITSET(r0, 15);                  /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
 
 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 8f7ea11..f544fc5 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ *  - Revision D, 06/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -97,11 +97,11 @@
 /* UART STB Bit Incorrectly Affects Receiver Setting */
 #define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
 /* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
-#define ANOMALY_05000233 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000233 (__SILICON_REVISION__ < 6)
 /* Incorrect Revision Number in DSPID Register */
 #define ANOMALY_05000234 (__SILICON_REVISION__ == 4)
 /* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
-#define ANOMALY_05000242 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
 /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
 /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
@@ -131,7 +131,7 @@
 /* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
 #define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
-#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+#define ANOMALY_05000265 (1)
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
 #define ANOMALY_05000269 (__SILICON_REVISION__ < 5)
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
@@ -141,56 +141,59 @@
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
 /* Writes to Synchronous SDRAM Memory May Be Lost */
-#define ANOMALY_05000273 (1)
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 6)
 /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
 #define ANOMALY_05000276 (1)
 /* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
-#define ANOMALY_05000277 (1)
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
-#define ANOMALY_05000278 (1)
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
 /* False Hardware Error Exception When ISR Context Is Not Restored */
-#define ANOMALY_05000281 (1)
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
 /* Memory DMA Corruption with 32-Bit Data and Traffic Control */
-#define ANOMALY_05000282 (1)
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
 /* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
-#define ANOMALY_05000283 (1)
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 6)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
-#define ANOMALY_05000288 (1)
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 6)
 /* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
-#define ANOMALY_05000301 (1)
+#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
-#define ANOMALY_05000311 (1)
+#define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (1)
+#define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
 /* PPI Is Level-Sensitive on First Transfer */
-#define ANOMALY_05000313 (1)
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
-#define ANOMALY_05000315 (1)
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
 /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
-#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+#define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
+#define ANOMALY_05000357 (__SILICON_REVISION__ < 6)
 /* UART Break Signal Issues */
 #define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
 /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
 #define ANOMALY_05000366 (1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 6)
 /* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
-
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
@@ -268,5 +271,7 @@
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000386 (1)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h
index 12a4169..dfc8c1a 100644
--- a/arch/blackfin/mach-bf533/include/mach/bf533.h
+++ b/arch/blackfin/mach-bf533/include/mach/bf533.h
@@ -30,8 +30,6 @@
 #ifndef __MACH_BF533_H__
 #define __MACH_BF533_H__
 
-#define SUPPORTED_REVID 2
-
 #define OFFSET_(x) ((x) & 0x0000FFFF)
 
 /*some misc defines*/
@@ -143,19 +141,19 @@
 
 #ifdef CONFIG_BF533
 #define CPU "BF533"
-#define CPUID 0x027a5000
+#define CPUID 0x27a5
 #endif
 #ifdef CONFIG_BF532
 #define CPU "BF532"
-#define CPUID 0x0275A000
+#define CPUID 0x275A
 #endif
 #ifdef CONFIG_BF531
 #define CPU "BF531"
-#define CPUID 0x027a5000
+#define CPUID 0x27a5
 #endif
+
 #ifndef CPU
-#define	CPU "UNKNOWN"
-#define CPUID 0x0
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
 #endif
 
 #endif				/* __MACH_BF533_H__  */
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index ebf592b..f3d9e49 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -69,6 +69,8 @@
 # endif
 #endif
 
+#define BFIN_UART_TX_FIFO_SIZE	2
+
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
@@ -83,7 +85,7 @@ struct bfin_serial_port {
 	unsigned int		rx_dma_channel;
 	struct work_struct	tx_dma_workqueue;
 #else
-# if ANOMALY_05000230
+# if ANOMALY_05000363
 	unsigned int anomaly_threshold;
 # endif
 #endif
@@ -111,7 +113,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
 }
 
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -142,7 +143,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
 
 #define DRIVER_NAME "bfin-uart"
 
-int nr_ports = BFIN_UART_NR_PORTS;
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
 
@@ -158,7 +158,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 	}
 	if (uart->rts_pin >= 0) {
 		gpio_request(uart->rts_pin, DRIVER_NAME);
-		gpio_direction_input(uart->rts_pin, 0);
+		gpio_direction_output(uart->rts_pin, 0);
 	}
 #endif
 }
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 8482d22..8d39439 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -51,7 +51,6 @@
 #include <asm/reboot.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
-#include <linux/spi/ad7877.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -555,6 +554,7 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 #endif
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#include <linux/spi/ad7877.h>
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -575,6 +575,30 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 };
 #endif
 
+#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#include <linux/spi/ad7879.h>
+static const struct ad7879_platform_data bfin_ad7879_ts_info = {
+	.model			= 7879,	/* Model = AD7879 */
+	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
+	.pressure_max		= 10000,
+	.pressure_min		= 0,
+	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
+	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
+	.median			= 2,	/* do 8 measurements */
+	.averaging 		= 1,	/* take the average of 4 middle samples */
+	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
+	.gpio_output		= 1,	/* configure AUX/VBAT/GPIO as GPIO output */
+	.gpio_default 		= 1,	/* During initialization set GPIO = HIGH */
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 static struct bfin5xx_spi_chip spidev_chip_info = {
 	.enable_dma = 0,
@@ -582,6 +606,13 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
+	.enable_dma	= 0,
+	.bits_per_word	= 8,
+};
+#endif
+
 #if defined(CONFIG_MTD_DATAFLASH) \
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
 
@@ -721,6 +752,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spi_ad7877_chip_info,
 	},
 #endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+	{
+		.modalias = "ad7879",
+		.platform_data = &bfin_ad7879_ts_info,
+		.irq = IRQ_PF7,
+		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spi_ad7879_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
@@ -730,6 +773,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spidev_chip_info,
 	},
 #endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 2,
+		.controller_data = &lq035q1_spi_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -777,6 +830,34 @@ static struct platform_device bfin_fb_adv7393_device = {
 };
 #endif
 
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = 	LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.use_bl = 	0,	/* let something else control the LCD Blacklight */
+	.gpio_bl =	GPIO_PF7,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource 	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -856,7 +937,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
 		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
-		.irq = 55,
+		.irq = IRQ_PF5,
 	},
 #endif
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
@@ -867,7 +948,14 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-		.irq = 72,
+		.irq = IRQ_PG6,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("ad7879", 0x2F),
+		.irq = IRQ_PG5,
+		.platform_data = (void *)&bfin_ad7879_ts_info,
 	},
 #endif
 };
@@ -997,6 +1085,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_fb_device,
 #endif
 
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	&bfin_lq035q1_device,
+#endif
+
 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
 	&bfin_fb_adv7393_device,
 #endif
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 12eb5cc..f5c94bf 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -87,6 +87,9 @@ ENTRY(_start_dma_code)
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */
+#ifdef ANOMALY_05000265
+	BITSET(r0, 15);                  /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
 
 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 8460ab9..c689924 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -158,6 +158,8 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000386 (1)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h
index cfe2a22..24d5c9d 100644
--- a/arch/blackfin/mach-bf537/include/mach/bf537.h
+++ b/arch/blackfin/mach-bf537/include/mach/bf537.h
@@ -30,8 +30,6 @@
 #ifndef __MACH_BF537_H__
 #define __MACH_BF537_H__
 
-#define SUPPORTED_REVID 2
-
 /* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */
 
 #define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE)	/* SPI_STAT */
@@ -123,19 +121,19 @@
 
 #ifdef CONFIG_BF537
 #define CPU "BF537"
-#define CPUID 0x027c8000
+#define CPUID 0x27c8
 #endif
 #ifdef CONFIG_BF536
 #define CPU "BF536"
-#define CPUID 0x027c8000
+#define CPUID 0x27c8
 #endif
 #ifdef CONFIG_BF534
 #define CPU "BF534"
-#define CPUID 0x027c6000
+#define CPUID 0x27c6
 #endif
+
 #ifndef CPU
-#define	CPU "UNKNOWN"
-#define CPUID 0x0
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
 #endif
 
 #endif				/* __MACH_BF537_H__  */
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 1bf56ff..b3f87e1 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -78,6 +78,9 @@
 #  define CONFIG_UART1_RTS_PIN -1
 # endif
 #endif
+
+#define BFIN_UART_TX_FIFO_SIZE	2
+
 /*
  * The pin configuration is different from schematic
  */
@@ -119,7 +122,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
 }
 
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -164,8 +166,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
 #endif
 };
 
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
 #define DRIVER_NAME "bfin-uart"
 
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index ce934ee..24192aa 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -36,11 +36,8 @@
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
 #include <asm/bfin5xx_spi.h>
-#include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/nand.h>
@@ -175,6 +172,7 @@ static struct resource bfin_uart_resources[] = {
 	{
 		.start = 0xFFC03100,
 		.end = 0xFFC031FF,
+		.flags = IORESOURCE_MEM,
 	},
 #endif
 };
@@ -268,6 +266,16 @@ static struct resource musb_resources[] = {
 	},
 };
 
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 7,
+	.dma_channels	= 7,
+	.gpio_vrsel	= GPIO_PH6,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -276,7 +284,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 	.mode		= MUSB_PERIPHERAL,
 #endif
-	.multipoint	= 0,
+	.config		= &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;
@@ -321,12 +329,12 @@ static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
 		.offset = 0,
-		.size = 4 * SIZE_1M,
+		.size = 4 * 1024 * 1024,
 	},
 	{
 		.name = "file system(nand)",
-		.offset = 4 * SIZE_1M,
-		.size = (256 - 4) * SIZE_1M,
+		.offset = 4 * 1024 * 1024,
+		.size = (256 - 4) * 1024 * 1024,
 	},
 };
 
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 3935769..5288187 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -38,11 +38,8 @@
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
 #include <asm/bfin5xx_spi.h>
-#include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/nand.h>
@@ -186,6 +183,37 @@ static struct platform_device bf54x_kpad_device = {
 };
 #endif
 
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#include <asm/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+	/*.rotary_up_key     = KEY_UP,*/
+	/*.rotary_down_key   = KEY_DOWN,*/
+	.rotary_rel_code   = REL_WHEEL,
+	.rotary_button_key = KEY_ENTER,
+	.debounce	   = 10,	/* 0..17 */
+	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
+};
+
+static struct resource bfin_rotary_resources[] = {
+	{
+		.start = IRQ_CNT,
+		.end = IRQ_CNT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_rotary_device = {
+	.name		= "bfin-rotary",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
+	.resource 	= bfin_rotary_resources,
+	.dev		= {
+		.platform_data = &bfin_rotary_data,
+	},
+};
+#endif
+
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
@@ -314,6 +342,16 @@ static struct resource musb_resources[] = {
 	},
 };
 
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 7,
+	.dma_channels	= 7,
+	.gpio_vrsel	= GPIO_PE7,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -322,7 +360,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 	.mode		= MUSB_PERIPHERAL,
 #endif
-	.multipoint	= 0,
+	.config		= &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;
@@ -367,7 +405,7 @@ static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
 		.offset = 0,
-		.size = 4 * SIZE_1M,
+		.size = 4 * 1024 * 1024,
 	},
 	{
 		.name = "file system(nand)",
@@ -424,7 +462,7 @@ static struct mtd_partition ezkit_partitions[] = {
 		.offset     = 0,
 	}, {
 		.name       = "linux kernel(nor)",
-		.size       = 0x1C0000,
+		.size       = 0x400000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
 		.name       = "file system(nor)",
@@ -441,7 +479,7 @@ static struct physmap_flash_data ezkit_flash_data = {
 
 static struct resource ezkit_flash_resource = {
 	.start = 0x20000000,
-	.end   = 0x20ffffff,
+	.end   = 0x21ffffff,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -551,7 +589,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 {
 	.modalias		= "ad7877",
 	.platform_data		= &bfin_ad7877_ts_info,
-	.irq			= IRQ_PJ11,
+	.irq			= IRQ_PJ11,	/* newer boards (Rev 1.4+) use IRQ_PB4 */
 	.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
 	.bus_num		= 0,
 	.chip_select  		= 2,
@@ -810,6 +848,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bf54x_kpad_device,
 #endif
 
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+	&bfin_rotary_device,
+#endif
+
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 	&i2c_bfin_twi0_device,
 #if !defined(CONFIG_BF542)
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 4d5cfea..93b361d 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -73,25 +73,19 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-#if defined(CONFIG_BF54x)
+	/* enable self refresh via SRREQ */
 	P2.H = hi(EBIU_RSTCTL);
 	P2.L = lo(EBIU_RSTCTL);
 	R0 = [P2];
 	BITSET (R0, 3);
-#else
-	P2.H = hi(EBIU_SDGCTL);
-	P2.L = lo(EBIU_SDGCTL);
-	R0 = [P2];
-	BITSET (R0, 24);
-#endif
 	[P2] = R0;
 	SSYNC;
-#if defined(CONFIG_BF54x)
+
+	/* wait for SRACK bit to be set */
 .LSRR_MODE:
 	R0 = [P2];
 	CC = BITTST(R0, 4);
 	if !CC JUMP .LSRR_MODE;
-#endif
 
 	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
 	r0 = r0 << 9;                    /* Shift it over,                  */
@@ -100,6 +94,9 @@ ENTRY(_start_dma_code)
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */
+#ifdef ANOMALY_05000265
+	BITSET(r0, 15);                  /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
 
 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */
@@ -123,7 +120,7 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-#if defined(CONFIG_BF54x)
+	/* disable self refresh by clearing SRREQ */
 	P2.H = hi(EBIU_RSTCTL);
 	P2.L = lo(EBIU_RSTCTL);
 	R0 = [P2];
@@ -155,41 +152,6 @@ ENTRY(_start_dma_code)
 	r0.h = hi(mem_DDRCTL2);
 	[p0] = r0;
 	ssync;
-#else
-	p0.l = lo(EBIU_SDRRC);
-	p0.h = hi(EBIU_SDRRC);
-	r0 = mem_SDRRC;
-	w[p0] = r0.l;
-	ssync;
-
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
-	P2.H = hi(EBIU_SDGCTL);
-	P2.L = lo(EBIU_SDGCTL);
-	R0 = [P2];
-	BITCLR (R0, 24);
-	p0.h = hi(EBIU_SDSTAT);
-	p0.l = lo(EBIU_SDSTAT);
-	r2.l = w[p0];
-	cc = bittst(r2,3);
-	if !cc jump .Lskip;
-	NOP;
-	BITSET (R0, 23);
-.Lskip:
-	[P2] = R0;
-	SSYNC;
-
-	R0.L = lo(mem_SDGCTL);
-	R0.H = hi(mem_SDGCTL);
-	R1 = [p2];
-	R1 = R1 | R0;
-	[P2] = R1;
-	SSYNC;
-#endif
 
 	RTS;
 ENDPROC(_start_dma_code)
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 3ad5965..816b092 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -2,18 +2,18 @@
  * File: include/asm-blackfin/mach-bf548/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision E, 11/28/2007; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
@@ -36,14 +36,14 @@
 /* TWI Slave Boot Mode Is Not Functional */
 #define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
 /* External FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000325 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
 /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
 #define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
 #define ANOMALY_05000328 (__SILICON_REVISION__ < 1)
 /* Synchronous Burst Flash Boot Mode Is Not Functional */
 #define ANOMALY_05000329 (__SILICON_REVISION__ < 1)
-/* Host DMA Boot Mode Is Not Functional */
+/* Host DMA Boot Modes Are Not Functional */
 #define ANOMALY_05000330 (__SILICON_REVISION__ < 1)
 /* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
 #define ANOMALY_05000334 (__SILICON_REVISION__ < 1)
@@ -61,26 +61,102 @@
 #define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
 /* USB Calibration Value Is Not Intialized */
 #define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
-/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0x5411
+/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
 #define ANOMALY_05000347 (__SILICON_REVISION__ < 1)
 /* Data Lost when Core Reads SDH Data FIFO */
 #define ANOMALY_05000349 (__SILICON_REVISION__ < 1)
 /* PLL Status Register Is Inaccurate */
 #define ANOMALY_05000351 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+#define ANOMALY_05000353 (__SILICON_REVISION__ < 2)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (__SILICON_REVISION__ < 1)
+/* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */
+#define ANOMALY_05000356 (__SILICON_REVISION__ < 1)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
 #define ANOMALY_05000357 (1)
 /* External Memory Read Access Hangs Core With PLL Bypass */
 #define ANOMALY_05000360 (1)
 /* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
 #define ANOMALY_05000365 (1)
+/* WURESET Bit In SYSCR Register Does Not Properly Indicate Hibernate Wake-Up */
+#define ANOMALY_05000367 (__SILICON_REVISION__ < 1)
 /* Addressing Conflict between Boot ROM and Asynchronous Memory */
 #define ANOMALY_05000369 (1)
+/* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */
+#define ANOMALY_05000370 (__SILICON_REVISION__ < 1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
+/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
+#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
 /* Mobile DDR Operation Not Functional */
 #define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
-#define ANOMALY_05000378 (1)
+#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
+/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
+#define ANOMALY_05000379 (1)
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (__SILICON_REVISION__ < 1)
+/* Some ATAPI Modes Are Not Functional */
+#define ANOMALY_05000383 (1)
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (__SILICON_REVISION__ < 1)
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (__SILICON_REVISION__ < 1)
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (__SILICON_REVISION__ < 1)
+/* Reset Vector Must Not Be in SDRAM Memory Space */
+#define ANOMALY_05000389 (__SILICON_REVISION__ < 1)
+/* Changed Meaning of BCODE Field in SYSCR Register */
+#define ANOMALY_05000390 (__SILICON_REVISION__ < 1)
+/* Repeated Boot from Page-Mode or Burst-Mode Flash Memory May Fail */
+#define ANOMALY_05000391 (__SILICON_REVISION__ < 1)
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (__SILICON_REVISION__ < 1)
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (__SILICON_REVISION__ < 1)
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (__SILICON_REVISION__ < 1)
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (__SILICON_REVISION__ < 1)
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (__SILICON_REVISION__ < 1)
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (__SILICON_REVISION__ < 1)
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Argument Checking Does Not Check L2 Memory Protection Range */
+#define ANOMALY_05000406 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+/* NAND Boot Mode Not Compatible With Some NAND Flash Devices */
+#define ANOMALY_05000413 (__SILICON_REVISION__ < 2)
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */
+#define ANOMALY_05000427 (__SILICON_REVISION__ < 2)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Behaves as a Buffer Status Bit Instead of an IRQ Status Bit */
+#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -93,6 +169,7 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
index e748588..49f9b40 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf548.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
@@ -30,8 +30,6 @@
 #ifndef __MACH_BF548_H__
 #define __MACH_BF548_H__
 
-#define SUPPORTED_REVID 0
-
 #define OFFSET_(x) ((x) & 0x0000FFFF)
 
 /*some misc defines*/
@@ -108,20 +106,23 @@
 
 #if defined(CONFIG_BF542)
 # define CPU   "BF542"
-# define CPUID 0x027c8000
+# define CPUID 0x27de
 #elif defined(CONFIG_BF544)
-# define CPU "BF544"
-# define CPUID 0x027c8000
+# define CPU   "BF544"
+# define CPUID 0x27de
 #elif defined(CONFIG_BF547)
-# define CPU "BF547"
+# define CPU   "BF547"
+# define CPUID 0x27de
 #elif defined(CONFIG_BF548)
-# define CPU "BF548"
-# define CPUID 0x027c6000
+# define CPU   "BF548"
+# define CPUID 0x27de
 #elif defined(CONFIG_BF549)
-# define CPU "BF549"
-#else
-# define CPU "UNKNOWN"
-# define CPUID 0x0
+# define CPU   "BF549"
+# define CPUID 0x27de
+#endif
+
+#ifndef CPU
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
 #endif
 
 #endif	/* __MACH_BF48_H__  */
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 5e29446..e4cf35e 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -82,6 +82,9 @@
 #  define CONFIG_UART1_RTS_PIN -1
 # endif
 #endif
+
+#define BFIN_UART_TX_FIFO_SIZE	2
+
 /*
  * The pin configuration is different from schematic
  */
@@ -105,7 +108,6 @@ struct bfin_serial_port {
 #endif
 };
 
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -170,8 +172,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
 #endif
 };
 
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
 #define DRIVER_NAME "bfin-uart"
 
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h
index f99f47b..a222842 100644
--- a/arch/blackfin/mach-bf548/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h
@@ -94,13 +94,13 @@
 #endif /*CONFIG_BFIN_DCACHE*/
 
 /* Level 2 Memory */
-#if !defined(CONFIG_BF542)
-# define L2_START          0xFEB00000
-# if defined(CONFIG_BF544)
-#  define L2_LENGTH        0x10000
-# else
-#  define L2_LENGTH        0x20000
-# endif
+#define L2_START            0xFEB00000
+#if defined(CONFIG_BF542)
+# define L2_LENGTH          0
+#elif defined(CONFIG_BF544)
+# define L2_LENGTH          0x10000
+#else
+# define L2_LENGTH          0x20000
 #endif
 
 /* Scratch Pad Memory */
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 75ea6a9..31a777a 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -77,6 +77,9 @@ ENTRY(_start_dma_code)
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */
+#ifdef ANOMALY_05000265
+	BITSET(r0, 15);                  /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
 
 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 5c5d7d7..22990df 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -270,5 +270,7 @@
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000386 (1)
 
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h
index 3ef9e5f..18b1b3a 100644
--- a/arch/blackfin/mach-bf561/include/mach/bf561.h
+++ b/arch/blackfin/mach-bf561/include/mach/bf561.h
@@ -30,8 +30,6 @@
 #ifndef __MACH_BF561_H__
 #define __MACH_BF561_H__
 
-#define SUPPORTED_REVID		0x3
-
 #define OFFSET_(x) ((x) & 0x0000FFFF)
 
 /*some misc defines*/
@@ -213,11 +211,11 @@
 
 #ifdef CONFIG_BF561
 #define CPU "BF561"
-#define CPUID 0x027bb000
+#define CPUID 0x27bb
 #endif
+
 #ifndef CPU
-#define CPU "UNKNOWN"
-#define CPUID 0x0
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
 #endif
 
 #endif				/* __MACH_BF561_H__  */
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 8aa0278..043bfcf 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -69,6 +69,8 @@
 # endif
 #endif
 
+#define BFIN_UART_TX_FIFO_SIZE	2
+
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
@@ -83,7 +85,7 @@ struct bfin_serial_port {
 	unsigned int		rx_dma_channel;
 	struct work_struct	tx_dma_workqueue;
 #else
-# if ANOMALY_05000230
+# if ANOMALY_05000363
 	unsigned int anomaly_threshold;
 # endif
 #endif
@@ -111,7 +113,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
 }
 
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -142,7 +143,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
 
 #define DRIVER_NAME "bfin-uart"
 
-int nr_ports = BFIN_UART_NR_PORTS;
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
 
@@ -158,7 +158,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 	}
 	if (uart->rts_pin >= 0) {
 		gpio_request(uart->rts_pin, DRIVER_NAME);
-		gpio_direction_input(uart->rts_pin, 0);
+		gpio_direction_output(uart->rts_pin, 0);
 	}
 #endif
 }
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
index c26d848..f1d4c06 100644
--- a/arch/blackfin/mach-bf561/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
@@ -35,9 +35,16 @@
 /* Memory Map for ADSP-BF561 processors */
 
 #ifdef CONFIG_BF561
-#define L1_CODE_START     0xFFA00000
-#define L1_DATA_A_START     0xFF800000
-#define L1_DATA_B_START     0xFF900000
+#define COREA_L1_CODE_START       0xFFA00000
+#define COREA_L1_DATA_A_START     0xFF800000
+#define COREA_L1_DATA_B_START     0xFF900000
+#define COREB_L1_CODE_START       0xFF600000
+#define COREB_L1_DATA_A_START     0xFF400000
+#define COREB_L1_DATA_B_START     0xFF500000
+
+#define L1_CODE_START       COREA_L1_CODE_START
+#define L1_DATA_A_START     COREA_L1_DATA_A_START
+#define L1_DATA_B_START     COREA_L1_DATA_B_START
 
 #define L1_CODE_LENGTH      0x4000
 
@@ -72,7 +79,10 @@
 
 /* Scratch Pad Memory */
 
-#define L1_SCRATCH_START	0xFFB00000
+#define COREA_L1_SCRATCH_START	0xFFB00000
+#define COREB_L1_SCRATCH_START	0xFF700000
+
+#define L1_SCRATCH_START	COREA_L1_SCRATCH_START
 #define L1_SCRATCH_LENGTH	0x1000
 
 #endif				/* _MEM_MAP_533_H_ */
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 85f8c79..db53218 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -1,148 +1,91 @@
 /*
- * File:         arch/blackfin/mach-common/cache.S
- * Based on:
- * Author:       LG Soft India
+ * Blackfin cache control code
  *
- * Created:
- * Description:  cache control support
+ * Copyright 2004-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/linkage.h>
-#include <asm/cplb.h>
-#include <asm/entry.h>
 #include <asm/blackfin.h>
 #include <asm/cache.h>
+#include <asm/page.h>
 
 .text
 
-/*
- * blackfin_cache_flush_range(start, end)
- * Invalidate all cache lines assocoiated with this
- * area of memory.
+/* Since all L1 caches work the same way, we use the same method for flushing
+ * them.  Only the actual flush instruction differs.  We write this in asm as
+ * GCC can be hard to coax into writing nice hardware loops.
  *
- * start:	Start address
- * end:		End address
+ * Also, we assume the following register setup:
+ * R0 = start address
+ * R1 = end address
  */
-ENTRY(_blackfin_icache_flush_range)
+.macro do_flush flushins:req optflushins optnopins label
+
+	/* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */
+	R1 += -1;
 	R2 = -L1_CACHE_BYTES;
-	R2 = R0 & R2;
-	P0 = R2;
-	P1 = R1;
-	CSYNC(R3);
-	IFLUSH [P0];
+	R1 = R1 & R2;
+	R1 += L1_CACHE_BYTES;
+
+	/* count = (end - start) >> L1_CACHE_SHIFT */
+	R2 = R1 - R0;
+	R2 >>= L1_CACHE_SHIFT;
+	P1 = R2;
+
+.ifnb \label
+\label :
+.endif
+	P0 = R0;
+	LSETUP (1f, 2f) LC1 = P1;
 1:
-	IFLUSH [P0++];
-	CC = P0 < P1 (iu);
-	IF CC JUMP 1b (bp);
-	IFLUSH [P0];
-	SSYNC(R3);
+.ifnb \optflushins
+	\optflushins [P0];
+.endif
+.ifb \optnopins
+2:
+.endif
+	\flushins [P0++];
+.ifnb \optnopins
+2: \optnopins;
+.endif
+
 	RTS;
-ENDPROC(_blackfin_icache_flush_range)
+.endm
 
-/*
- * blackfin_icache_dcache_flush_range(start, end)
- * FLUSH all cache lines assocoiated with this
- * area of memory.
- *
- * start:	Start address
- * end:		End address
- */
+/* Invalidate all instruction cache lines assocoiated with this memory area */
+ENTRY(_blackfin_icache_flush_range)
+	do_flush IFLUSH, , nop
+ENDPROC(_blackfin_icache_flush_range)
 
+/* Flush all cache lines assocoiated with this area of memory. */
 ENTRY(_blackfin_icache_dcache_flush_range)
-	R2 = -L1_CACHE_BYTES;
-	R2 = R0 & R2;
-	P0 = R2;
-	P1 = R1;
-	CSYNC(R3);
-	IFLUSH [P0];
-1:
-	FLUSH [P0];
-	IFLUSH [P0++];
-	CC = P0 < P1 (iu);
-	IF CC JUMP 1b (bp);
-	IFLUSH [P0];
-	FLUSH [P0];
-	SSYNC(R3);
-	RTS;
+	do_flush IFLUSH, FLUSH
 ENDPROC(_blackfin_icache_dcache_flush_range)
 
 /* Throw away all D-cached data in specified region without any obligation to
- * write them back. However, we must clean the D-cached entries around the
- * boundaries of the start and/or end address is not cache aligned.
- *
- * Start: start address,
- * end  : end address.
+ * write them back.  Since the Blackfin ISA does not have an "invalidate"
+ * instruction, we use flush/invalidate.  Perhaps as a speed optimization we
+ * could bang on the DTEST MMRs ...
  */
-
 ENTRY(_blackfin_dcache_invalidate_range)
-	R2 = -L1_CACHE_BYTES;
-	R2 = R0 & R2;
-	P0 = R2;
-	P1 = R1;
-	CSYNC(R3);
-	FLUSHINV[P0];
-1:
-	FLUSHINV[P0++];
-	CC = P0 < P1 (iu);
-	IF CC JUMP 1b (bp);
-
-	/* If the data crosses a cache line, then we'll be pointing to
-	 * the last cache line, but won't have flushed/invalidated it yet,
-	 * so do one more.
-	 */
-	FLUSHINV[P0];
-	SSYNC(R3);
-	RTS;
+	do_flush FLUSHINV
 ENDPROC(_blackfin_dcache_invalidate_range)
 
+/* Flush all data cache lines assocoiated with this memory area */
 ENTRY(_blackfin_dcache_flush_range)
-	R2 = -L1_CACHE_BYTES;
-	R2 = R0 & R2;
-	P0 = R2;
-	P1 = R1;
-	CSYNC(R3);
-	FLUSH[P0];
-1:
-	FLUSH[P0++];
-	CC = P0 < P1 (iu);
-	IF CC JUMP 1b (bp);
-
-	/* If the data crosses a cache line, then we'll be pointing to
-	 * the last cache line, but won't have flushed it yet, so do
-	 * one more.
-	 */
-	FLUSH[P0];
-	SSYNC(R3);
-	RTS;
+	do_flush FLUSH, , , .Ldfr
 ENDPROC(_blackfin_dcache_flush_range)
 
+/* Our headers convert the page structure to an address, so just need to flush
+ * its contents like normal.  We know the start address is page aligned (which
+ * greater than our cache alignment), as is the end address.  So just jump into
+ * the middle of the dcache flush function.
+ */
 ENTRY(_blackfin_dflush_page)
 	P1 = 1 << (PAGE_SHIFT - L1_CACHE_SHIFT);
-	P0 = R0;
-	CSYNC(R3);
-	FLUSH[P0];
-	LSETUP (.Lfl1, .Lfl1) LC0 = P1;
-.Lfl1:	FLUSH [P0++];
-	SSYNC(R3);
-	RTS;
+	jump .Ldfr;
 ENDPROC(_blackfin_dflush_page)
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 75cdad2..c22c47b 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -158,8 +158,6 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
 						 dpm_state_table[index].tscale);
 	}
 
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
 	policy->cpuinfo.transition_latency = (bfin_read_PLL_LOCKCNT() / (sclk / 1000000)) * 1000;
 	/*Now ,only support one cpu */
 	policy->cur = cclk;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 847c172..c13fa8d 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -129,6 +129,18 @@ ENTRY(_ex_icplb_miss)
 #else
 	call __cplb_hdr;
 #endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* While we were processing this, did we double fault? */
+	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
+	r6.l = lo(SEQSTAT_EXCAUSE);
+	r6.h = hi(SEQSTAT_EXCAUSE);
+	r7 = r7 & r6;
+	r6 = 0x25;
+	CC = R7 == R6;
+	if CC JUMP _double_fault;
+#endif
+
 	DEBUG_HWTRACE_RESTORE(p5, r7)
 	RESTORE_ALL_SYS
 	SP = EX_SCRATCH_REG;
@@ -136,11 +148,8 @@ ENTRY(_ex_icplb_miss)
 ENDPROC(_ex_icplb_miss)
 
 ENTRY(_ex_syscall)
-	(R7:6,P5:4) = [sp++];
-	ASTAT = [sp++];
 	raise 15;		/* invoked by TRAP #0, for sys call */
-	sp = EX_SCRATCH_REG;
-	rtx
+	jump.s _bfin_return_from_exception;
 ENDPROC(_ex_syscall)
 
 ENTRY(_ex_soft_bp)
@@ -181,8 +190,8 @@ ENTRY(_ex_single_step)
 	if cc jump .Lfind_priority_done;
 	jump.s .Lfind_priority_start;
 .Lfind_priority_done:
-	p4.l = _debugger_step;
-	p4.h = _debugger_step;
+	p4.l = _kgdb_single_step;
+	p4.h = _kgdb_single_step;
 	r6 = [p4];
 	cc = r6 == 0;
 	if cc jump .Ldo_single_step;
@@ -250,6 +259,29 @@ ENTRY(_bfin_return_from_exception)
 	R7=LC1;
 	LC1=R7;
 #endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* While we were processing the current exception,
+	 * did we cause another, and double fault?
+	 */
+	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
+	r6.l = lo(SEQSTAT_EXCAUSE);
+	r6.h = hi(SEQSTAT_EXCAUSE);
+	r7 = r7 & r6;
+	r6 = 0x25;
+	CC = R7 == R6;
+	if CC JUMP _double_fault;
+
+	/* Did we cause a HW error? */
+	p5.l = lo(ILAT);
+	p5.h = hi(ILAT);
+	r6 = [p5];
+	r7 = 0x20;		/* Did I just cause anther HW error? */
+	r7 = r7 & r1;
+	CC = R7 == R6;
+	if CC JUMP _double_fault;
+#endif
+
 	(R7:6,P5:4) = [sp++];
 	ASTAT = [sp++];
 	sp = EX_SCRATCH_REG;
@@ -292,6 +324,14 @@ ENTRY(_ex_trap_c)
 	[p4] = p5;
 	csync;
 
+#ifndef CONFIG_DEBUG_DOUBLEFAULT
+	/*
+	 * Save these registers, as they are only valid in exception context
+	 *  (where we are now - as soon as we defer to IRQ5, they can change)
+	 * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
+	 * but they are not very interesting, so don't save them
+	 */
+
 	p4.l = lo(DCPLB_FAULT_ADDR);
 	p4.h = hi(DCPLB_FAULT_ADDR);
 	r7 = [p4];
@@ -304,12 +344,11 @@ ENTRY(_ex_trap_c)
 	p5.l = _saved_icplb_fault_addr;
 	[p5] = r7;
 
-	p4.l = _excpt_saved_stuff;
-	p4.h = _excpt_saved_stuff;
-
 	r6 = retx;
+	p4.l = _saved_retx;
+	p4.h = _saved_retx;
 	[p4] = r6;
-
+#endif
 	r6 = SYSCFG;
 	[p4 + 4] = r6;
 	BITCLR(r6, 0);
@@ -327,59 +366,56 @@ ENTRY(_ex_trap_c)
 	r6 = 0x3f;
 	sti r6;
 
-	(R7:6,P5:4) = [sp++];
-	ASTAT = [sp++];
-	SP = EX_SCRATCH_REG;
 	raise 5;
-	rtx;
+	jump.s _bfin_return_from_exception;
 ENDPROC(_ex_trap_c)
 
 /* We just realized we got an exception, while we were processing a different
  * exception. This is a unrecoverable event, so crash
  */
 ENTRY(_double_fault)
-        /* Turn caches & protection off, to ensure we don't get any more
-         * double exceptions
-         */
-
-        P4.L = LO(IMEM_CONTROL);
-        P4.H = HI(IMEM_CONTROL);
-
-        R5 = [P4];              /* Control Register*/
-        BITCLR(R5,ENICPLB_P);
-        SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
-        .align 8;
-        [P4] = R5;
-        SSYNC;
-
-        P4.L = LO(DMEM_CONTROL);
-        P4.H = HI(DMEM_CONTROL);
-        R5 = [P4];
-        BITCLR(R5,ENDCPLB_P);
-        SSYNC;          /* SSYNC required before writing to DMEM_CONTROL. */
-        .align 8;
-        [P4] = R5;
-        SSYNC;
-
-        /* Fix up the stack */
-        (R7:6,P5:4) = [sp++];
-        ASTAT = [sp++];
-        SP = EX_SCRATCH_REG;
-
-        /* We should be out of the exception stack, and back down into
-         * kernel or user space stack
-         */
-        SAVE_ALL_SYS
+	/* Turn caches & protection off, to ensure we don't get any more
+	 * double exceptions
+	 */
+
+	P4.L = LO(IMEM_CONTROL);
+	P4.H = HI(IMEM_CONTROL);
+
+	R5 = [P4];              /* Control Register*/
+	BITCLR(R5,ENICPLB_P);
+	SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+
+	P4.L = LO(DMEM_CONTROL);
+	P4.H = HI(DMEM_CONTROL);
+	R5 = [P4];
+	BITCLR(R5,ENDCPLB_P);
+	SSYNC;          /* SSYNC required before writing to DMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+
+	/* Fix up the stack */
+	(R7:6,P5:4) = [sp++];
+	ASTAT = [sp++];
+	SP = EX_SCRATCH_REG;
+
+	/* We should be out of the exception stack, and back down into
+	 * kernel or user space stack
+	 */
+	SAVE_ALL_SYS
 
 	/* The dumping functions expect the return address in the RETI
 	 * slot.  */
 	r6 = retx;
 	[sp + PT_PC] = r6;
 
-        r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
-        SP += -12;
-        call _double_fault_c;
-        SP += 12;
+	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
+	SP += -12;
+	call _double_fault_c;
+	SP += 12;
 .L_double_fault_panic:
         JUMP .L_double_fault_panic
 
@@ -388,8 +424,8 @@ ENDPROC(_double_fault)
 ENTRY(_exception_to_level5)
 	SAVE_ALL_SYS
 
-	p4.l = _excpt_saved_stuff;
-	p4.h = _excpt_saved_stuff;
+	p4.l = _saved_retx;
+	p4.h = _saved_retx;
 	r6 = [p4];
 	[sp + PT_PC] = r6;
 
@@ -420,6 +456,17 @@ ENTRY(_exception_to_level5)
 	call _trap_c;
 	SP += 12;
 
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* Grab ILAT */
+	p2.l = lo(ILAT);
+	p2.h = hi(ILAT);
+	r0 = [p2];
+	r1 = 0x20;  /* Did I just cause anther HW error? */
+	r0 = r0 & r1;
+	CC = R0 == R1;
+	if CC JUMP _double_fault;
+#endif
+
 	call _ret_from_exception;
 	RESTORE_ALL_SYS
 	rti;
@@ -436,7 +483,48 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	/* Try to deal with syscalls quickly.  */
 	[--sp] = ASTAT;
 	[--sp] = (R7:6,P5:4);
+
+#if ANOMALY_05000283 || ANOMALY_05000315
+	cc = r7 == r7;
+	p5.h = HI(CHIPID);
+	p5.l = LO(CHIPID);
+	if cc jump 1f;
+	r7.l = W[p5];
+1:
+#endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/*
+	 * Save these registers, as they are only valid in exception context
+	 * (where we are now - as soon as we defer to IRQ5, they can change)
+	 * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
+	 * but they are not very interesting, so don't save them
+	 */
+
+	p4.l = lo(DCPLB_FAULT_ADDR);
+	p4.h = hi(DCPLB_FAULT_ADDR);
+	r7 = [p4];
+	p5.h = _saved_dcplb_fault_addr;
+	p5.l = _saved_dcplb_fault_addr;
+	[p5] = r7;
+
+	r7 = [p4 + (ICPLB_FAULT_ADDR - DCPLB_FAULT_ADDR)];
+	p5.h = _saved_icplb_fault_addr;
+	p5.l = _saved_icplb_fault_addr;
+	[p5] = r7;
+
+	p4.l = _saved_retx;
+	p4.h = _saved_retx;
+	r6 = retx;
+	[p4] = r6;
+
 	r7 = SEQSTAT;		/* reason code is in bit 5:0 */
+	p4.l = _saved_seqstat;
+	p4.h = _saved_seqstat;
+	[p4] = r7;
+#else
+	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
+#endif
 	r6.l = lo(SEQSTAT_EXCAUSE);
 	r6.h = hi(SEQSTAT_EXCAUSE);
 	r7 = r7 & r6;
@@ -616,6 +704,9 @@ ENTRY(_system_call)
 	rts;
 ENDPROC(_system_call)
 
+/* Do not mark as ENTRY() to avoid error in assembler ...
+ * this symbol need not be global anyways, so ...
+ */
 _sys_trace:
 	call _syscall_trace;
 
@@ -941,6 +1032,15 @@ ENTRY(_early_trap)
 	SAVE_ALL_SYS
 	trace_buffer_stop(p0,r0);
 
+#if ANOMALY_05000283 || ANOMALY_05000315
+	cc = r5 == r5;
+	p4.h = HI(CHIPID);
+	p4.l = LO(CHIPID);
+	if cc jump 1f;
+	r5.l = W[p4];
+1:
+#endif
+
 	/* Turn caches off, to ensure we don't get double exceptions */
 
 	P4.L = LO(IMEM_CONTROL);
@@ -992,7 +1092,12 @@ ENTRY(_ex_table)
 	 */
 	.long _ex_syscall       /* 0x00 - User Defined - Linux Syscall */
 	.long _ex_soft_bp       /* 0x01 - User Defined - Software breakpoint */
+#ifdef	CONFIG_KGDB
+	.long _ex_trap_c	/* 0x02 - User Defined - KGDB initial connection
+							 and break signal trap */
+#else
 	.long _ex_replaceable   /* 0x02 - User Defined */
+#endif
 	.long _ex_trap_c        /* 0x03 - User Defined - userspace stack overflow */
 	.long _ex_trap_c        /* 0x04 - User Defined - dump trace buffer */
 	.long _ex_replaceable   /* 0x05 - User Defined */
@@ -1432,15 +1537,7 @@ ENTRY(_sys_call_table)
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
 	.endr
-
-	/*
-	 * Used to save the real RETX, IMASK and SYSCFG when temporarily
-	 * storing safe values across the transition from exception to IRQ5.
-	 */
-_excpt_saved_stuff:
-	.long 0;
-	.long 0;
-	.long 0;
+END(_sys_call_table)
 
 _exception_stack:
 	.rept 1024
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index 191b4e9..f123a62 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -68,6 +68,16 @@ ENTRY(__start)
 	M2 = r0;
 	M3 = r0;
 
+	/*
+	 * Clear ITEST_COMMAND and DTEST_COMMAND registers,
+	 * Leaving these as non-zero can confuse the emulator
+	 */
+	p0.L = LO(DTEST_COMMAND);
+	p0.H = HI(DTEST_COMMAND);
+	[p0] = R0;
+	[p0 + (ITEST_COMMAND - DTEST_COMMAND)] = R0;
+	CSYNC;
+
 	trace_buffer_init(p0,r0);
 	P0 = R1;
 	R0 = R1;
@@ -90,12 +100,46 @@ ENTRY(__start)
 	[p0] = R0;
 	SSYNC;
 
-	/* Save RETX, in case of doublefault */
-	p0.l = ___retx;
-	p0.h = ___retx;
+	/* in case of double faults, save a few things */
+	p0.l = _init_retx;
+	p0.h = _init_retx;
 	R0 = RETX;
 	[P0] = R0;
 
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* Only save these if we are storing them,
+	 * This happens here, since L1 gets clobbered
+	 * below
+	 */
+	p0.l = _saved_retx;
+	p0.h = _saved_retx;
+	p1.l = _init_saved_retx;
+	p1.h = _init_saved_retx;
+	r0 = [p0];
+	[p1] = r0;
+
+	p0.l = _saved_dcplb_fault_addr;
+	p0.h = _saved_dcplb_fault_addr;
+	p1.l = _init_saved_dcplb_fault_addr;
+	p1.h = _init_saved_dcplb_fault_addr;
+	r0 = [p0];
+	[p1] = r0;
+
+	p0.l = _saved_icplb_fault_addr;
+	p0.h = _saved_icplb_fault_addr;
+	p1.l = _init_saved_icplb_fault_addr;
+	p1.h = _init_saved_icplb_fault_addr;
+	r0 = [p0];
+	[p1] = r0;
+
+	p0.l = _saved_seqstat;
+	p0.h = _saved_seqstat;
+	p1.l = _init_saved_seqstat;
+	p1.h = _init_saved_seqstat;
+	r0 = [p0];
+	[p1] = r0;
+#endif
+
 	/* Initialize stack pointer */
 	sp.l = lo(INITIAL_STACK);
 	sp.h = hi(INITIAL_STACK);
@@ -107,7 +151,7 @@ ENTRY(__start)
 #endif
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
+	call _bfin_relocate_l1_mem;
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif
@@ -162,6 +206,60 @@ ENTRY(_real_start)
 	w[p0] = r0;
 	ssync;
 
+#if L1_DATA_A_LENGTH > 0
+	r1.l = __sbss_l1;
+	r1.h = __sbss_l1;
+	r2.l = __ebss_l1;
+	r2.h = __ebss_l1;
+	r0 = 0 (z);
+	r2 = r2 - r1;
+	cc = r2 == 0;
+	if cc jump .L_a_l1_done;
+	r2 >>= 2;
+	p1 = r1;
+	p2 = r2;
+	lsetup (.L_clear_a_l1, .L_clear_a_l1 ) lc0 = p2;
+.L_clear_a_l1:
+	[p1++] = r0;
+.L_a_l1_done:
+#endif
+
+#if L1_DATA_B_LENGTH > 0
+	r1.l = __sbss_b_l1;
+	r1.h = __sbss_b_l1;
+	r2.l = __ebss_b_l1;
+	r2.h = __ebss_b_l1;
+	r0 = 0 (z);
+	r2 = r2 - r1;
+	cc = r2 == 0;
+	if cc jump .L_b_l1_done;
+	r2 >>= 2;
+	p1 = r1;
+	p2 = r2;
+	lsetup (.L_clear_b_l1, .L_clear_b_l1 ) lc0 = p2;
+.L_clear_b_l1:
+	[p1++] = r0;
+.L_b_l1_done:
+#endif
+
+#if L2_LENGTH > 0
+	r1.l = __sbss_l2;
+	r1.h = __sbss_l2;
+	r2.l = __ebss_l2;
+	r2.h = __ebss_l2;
+	r0 = 0 (z);
+	r2 = r2 - r1;
+	cc = r2 == 0;
+	if cc jump .L_l2_done;
+	r2 >>= 2;
+	p1 = r1;
+	p2 = r2;
+	lsetup (.L_clear_l2, .L_clear_l2 ) lc0 = p2;
+.L_clear_l2:
+	[p1++] = r0;
+.L_l2_done:
+#endif
+
 	/* Zero out the bss region
 	 * Note: this will fail if bss is 0 bytes ...
 	 */
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index b27e59d..4a2ec7a 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -143,7 +143,7 @@ ENTRY(_evt_ivhw)
 	fp = 0;
 #endif
 
-#if ANOMALY_05000283
+#if ANOMALY_05000283 || ANOMALY_05000315
 	cc = r7 == r7;
 	p5.h = HI(CHIPID);
 	p5.l = LO(CHIPID);
@@ -179,7 +179,16 @@ ENTRY(_evt_ivhw)
 	call _trap_c;
 	SP += 12;
 
+#ifdef EBIU_ERRMST
+	/* make sure EBIU_ERRMST is clear */
+	p0.l = LO(EBIU_ERRMST);
+	p0.h = HI(EBIU_ERRMST);
+	r0.l = (CORE_ERROR | CORE_MERROR);
+	w[p0] = r0.l;
+#endif
+
 	call _ret_from_exception;
+
 .Lcommon_restore_all_sys:
 	RESTORE_ALL_SYS
 	rti;
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 5fa5367..34e8a72 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -243,12 +243,14 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 #endif
 
 static struct irq_chip bfin_core_irqchip = {
+	.name = "CORE",
 	.ack = bfin_ack_noop,
 	.mask = bfin_core_mask_irq,
 	.unmask = bfin_core_unmask_irq,
 };
 
 static struct irq_chip bfin_internal_irqchip = {
+	.name = "INTN",
 	.ack = bfin_ack_noop,
 	.mask = bfin_internal_mask_irq,
 	.unmask = bfin_internal_unmask_irq,
@@ -278,6 +280,7 @@ static void bfin_generic_error_unmask_irq(unsigned int irq)
 }
 
 static struct irq_chip bfin_generic_error_irqchip = {
+	.name = "ERROR",
 	.ack = bfin_ack_noop,
 	.mask_ack = bfin_generic_error_mask_irq,
 	.mask = bfin_generic_error_mask_irq,
@@ -361,6 +364,14 @@ static void bfin_demux_error_irq(unsigned int int_err_irq,
 }
 #endif				/* BF537_GENERIC_ERROR_INT_DEMUX */
 
+static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
+{
+	struct irq_desc *desc = irq_desc + irq;
+	/* May not call generic set_irq_handler() due to spinlock
+	   recursion. */
+	desc->handle_irq = handle;
+}
+
 #if !defined(CONFIG_BF54x)
 
 static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -473,9 +484,9 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 	SSYNC();
 
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
-		set_irq_handler(irq, handle_edge_irq);
+		bfin_set_irq_handler(irq, handle_edge_irq);
 	else
-		set_irq_handler(irq, handle_level_irq);
+		bfin_set_irq_handler(irq, handle_level_irq);
 
 	return 0;
 }
@@ -495,6 +506,7 @@ int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
 #endif
 
 static struct irq_chip bfin_gpio_irqchip = {
+	.name = "GPIO",
 	.ack = bfin_gpio_ack_irq,
 	.mask = bfin_gpio_mask_irq,
 	.mask_ack = bfin_gpio_mask_ack_irq,
@@ -804,10 +816,10 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
 		pint[bank]->edge_set = pintbit;
-		set_irq_handler(irq, handle_edge_irq);
+		bfin_set_irq_handler(irq, handle_edge_irq);
 	} else {
 		pint[bank]->edge_clear = pintbit;
-		set_irq_handler(irq, handle_level_irq);
+		bfin_set_irq_handler(irq, handle_level_irq);
 	}
 
 	SSYNC();
@@ -884,6 +896,7 @@ void bfin_pm_restore(void)
 #endif
 
 static struct irq_chip bfin_gpio_irqchip = {
+	.name = "GPIO",
 	.ack = bfin_gpio_ack_irq,
 	.mask = bfin_gpio_mask_irq,
 	.mask_ack = bfin_gpio_mask_ack_irq,
@@ -1136,8 +1149,4 @@ void do_irq(int vec, struct pt_regs *fp)
 		vec = ivg->irqno;
 	}
 	asm_do_IRQ(vec, fp);
-
-#ifdef CONFIG_KGDB
-	kgdb_process_breakpoint();
-#endif
 }
diff --git a/arch/blackfin/mm/Makefile b/arch/blackfin/mm/Makefile
index 2a7202c..d489f89 100644
--- a/arch/blackfin/mm/Makefile
+++ b/arch/blackfin/mm/Makefile
@@ -2,4 +2,4 @@
 # arch/blackfin/mm/Makefile
 #
 
-obj-y := blackfin_sram.o init.o
+obj-y := sram-alloc.o isram-driver.o init.o
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
deleted file mode 100644
index 4f5e887..0000000
--- a/arch/blackfin/mm/blackfin_sram.c
+++ /dev/null
@@ -1,806 +0,0 @@
-/*
- * File:         arch/blackfin/mm/blackfin_sram.c
- * Based on:
- * Author:
- *
- * Created:
- * Description:  SRAM driver for Blackfin ADSP-BF5xx
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/rtc.h>
-#include <asm/blackfin.h>
-#include "blackfin_sram.h"
-
-static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
-static spinlock_t l2_sram_lock;
-
-/* the data structure for L1 scratchpad and DATA SRAM */
-struct sram_piece {
-	void *paddr;
-	int size;
-	pid_t pid;
-	struct sram_piece *next;
-};
-
-static struct sram_piece free_l1_ssram_head, used_l1_ssram_head;
-
-#if L1_DATA_A_LENGTH != 0
-static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head;
-#endif
-
-#if L1_DATA_B_LENGTH != 0
-static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
-#endif
-
-#if L1_CODE_LENGTH != 0
-static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
-#endif
-
-#if L2_LENGTH != 0
-static struct sram_piece free_l2_sram_head, used_l2_sram_head;
-#endif
-
-static struct kmem_cache *sram_piece_cache;
-
-/* L1 Scratchpad SRAM initialization function */
-static void __init l1sram_init(void)
-{
-	free_l1_ssram_head.next =
-		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
-	if (!free_l1_ssram_head.next) {
-		printk(KERN_INFO"Fail to initialize Scratchpad data SRAM.\n");
-		return;
-	}
-
-	free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START;
-	free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH;
-	free_l1_ssram_head.next->pid = 0;
-	free_l1_ssram_head.next->next = NULL;
-
-	used_l1_ssram_head.next = NULL;
-
-	/* mutex initialize */
-	spin_lock_init(&l1sram_lock);
-
-	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
-	       L1_SCRATCH_LENGTH >> 10);
-}
-
-static void __init l1_data_sram_init(void)
-{
-#if L1_DATA_A_LENGTH != 0
-	free_l1_data_A_sram_head.next =
-		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
-	if (!free_l1_data_A_sram_head.next) {
-		printk(KERN_INFO"Fail to initialize L1 Data A SRAM.\n");
-		return;
-	}
-
-	free_l1_data_A_sram_head.next->paddr =
-		(void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1);
-	free_l1_data_A_sram_head.next->size =
-		L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
-	free_l1_data_A_sram_head.next->pid = 0;
-	free_l1_data_A_sram_head.next->next = NULL;
-
-	used_l1_data_A_sram_head.next = NULL;
-
-	printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
-		L1_DATA_A_LENGTH >> 10,
-		free_l1_data_A_sram_head.next->size >> 10);
-#endif
-#if L1_DATA_B_LENGTH != 0
-	free_l1_data_B_sram_head.next =
-		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
-	if (!free_l1_data_B_sram_head.next) {
-		printk(KERN_INFO"Fail to initialize L1 Data B SRAM.\n");
-		return;
-	}
-
-	free_l1_data_B_sram_head.next->paddr =
-		(void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1);
-	free_l1_data_B_sram_head.next->size =
-		L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
-	free_l1_data_B_sram_head.next->pid = 0;
-	free_l1_data_B_sram_head.next->next = NULL;
-
-	used_l1_data_B_sram_head.next = NULL;
-
-	printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
-		L1_DATA_B_LENGTH >> 10,
-		free_l1_data_B_sram_head.next->size >> 10);
-#endif
-
-	/* mutex initialize */
-	spin_lock_init(&l1_data_sram_lock);
-}
-
-static void __init l1_inst_sram_init(void)
-{
-#if L1_CODE_LENGTH != 0
-	free_l1_inst_sram_head.next =
-		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
-	if (!free_l1_inst_sram_head.next) {
-		printk(KERN_INFO"Fail to initialize L1 Instruction SRAM.\n");
-		return;
-	}
-
-	free_l1_inst_sram_head.next->paddr =
-		(void *)L1_CODE_START + (_etext_l1 - _stext_l1);
-	free_l1_inst_sram_head.next->size =
-		L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
-	free_l1_inst_sram_head.next->pid = 0;
-	free_l1_inst_sram_head.next->next = NULL;
-
-	used_l1_inst_sram_head.next = NULL;
-
-	printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
-		L1_CODE_LENGTH >> 10,
-		free_l1_inst_sram_head.next->size >> 10);
-#endif
-
-	/* mutex initialize */
-	spin_lock_init(&l1_inst_sram_lock);
-}
-
-static void __init l2_sram_init(void)
-{
-#if L2_LENGTH != 0
-	free_l2_sram_head.next =
-		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
-	if (!free_l2_sram_head.next) {
-		printk(KERN_INFO"Fail to initialize L2 SRAM.\n");
-		return;
-	}
-
-	free_l2_sram_head.next->paddr = (void *)L2_START +
-		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
-	free_l2_sram_head.next->size = L2_LENGTH -
-		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
-	free_l2_sram_head.next->pid = 0;
-	free_l2_sram_head.next->next = NULL;
-
-	used_l2_sram_head.next = NULL;
-
-	printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
-		L2_LENGTH >> 10,
-		free_l2_sram_head.next->size >> 10);
-#endif
-
-	/* mutex initialize */
-	spin_lock_init(&l2_sram_lock);
-}
-void __init bfin_sram_init(void)
-{
-	sram_piece_cache = kmem_cache_create("sram_piece_cache",
-				sizeof(struct sram_piece),
-				0, SLAB_PANIC, NULL);
-
-	l1sram_init();
-	l1_data_sram_init();
-	l1_inst_sram_init();
-	l2_sram_init();
-}
-
-/* SRAM allocate function */
-static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
-		struct sram_piece *pused_head)
-{
-	struct sram_piece *pslot, *plast, *pavail;
-
-	if (size <= 0 || !pfree_head || !pused_head)
-		return NULL;
-
-	/* Align the size */
-	size = (size + 3) & ~3;
-
-	pslot = pfree_head->next;
-	plast = pfree_head;
-
-	/* search an available piece slot */
-	while (pslot != NULL && size > pslot->size) {
-		plast = pslot;
-		pslot = pslot->next;
-	}
-
-	if (!pslot)
-		return NULL;
-
-	if (pslot->size == size) {
-		plast->next = pslot->next;
-		pavail = pslot;
-	} else {
-		pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
-
-		if (!pavail)
-			return NULL;
-
-		pavail->paddr = pslot->paddr;
-		pavail->size = size;
-		pslot->paddr += size;
-		pslot->size -= size;
-	}
-
-	pavail->pid = current->pid;
-
-	pslot = pused_head->next;
-	plast = pused_head;
-
-	/* insert new piece into used piece list !!! */
-	while (pslot != NULL && pavail->paddr < pslot->paddr) {
-		plast = pslot;
-		pslot = pslot->next;
-	}
-
-	pavail->next = pslot;
-	plast->next = pavail;
-
-	return pavail->paddr;
-}
-
-/* Allocate the largest available block.  */
-static void *_sram_alloc_max(struct sram_piece *pfree_head,
-				struct sram_piece *pused_head,
-				unsigned long *psize)
-{
-	struct sram_piece *pslot, *pmax;
-
-	if (!pfree_head || !pused_head)
-		return NULL;
-
-	pmax = pslot = pfree_head->next;
-
-	/* search an available piece slot */
-	while (pslot != NULL) {
-		if (pslot->size > pmax->size)
-			pmax = pslot;
-		pslot = pslot->next;
-	}
-
-	if (!pmax)
-		return NULL;
-
-	*psize = pmax->size;
-
-	return _sram_alloc(*psize, pfree_head, pused_head);
-}
-
-/* SRAM free function */
-static int _sram_free(const void *addr,
-			struct sram_piece *pfree_head,
-			struct sram_piece *pused_head)
-{
-	struct sram_piece *pslot, *plast, *pavail;
-
-	if (!pfree_head || !pused_head)
-		return -1;
-
-	/* search the relevant memory slot */
-	pslot = pused_head->next;
-	plast = pused_head;
-
-	/* search an available piece slot */
-	while (pslot != NULL && pslot->paddr != addr) {
-		plast = pslot;
-		pslot = pslot->next;
-	}
-
-	if (!pslot)
-		return -1;
-
-	plast->next = pslot->next;
-	pavail = pslot;
-	pavail->pid = 0;
-
-	/* insert free pieces back to the free list */
-	pslot = pfree_head->next;
-	plast = pfree_head;
-
-	while (pslot != NULL && addr > pslot->paddr) {
-		plast = pslot;
-		pslot = pslot->next;
-	}
-
-	if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
-		plast->size += pavail->size;
-		kmem_cache_free(sram_piece_cache, pavail);
-	} else {
-		pavail->next = plast->next;
-		plast->next = pavail;
-		plast = pavail;
-	}
-
-	if (pslot && plast->paddr + plast->size == pslot->paddr) {
-		plast->size += pslot->size;
-		plast->next = pslot->next;
-		kmem_cache_free(sram_piece_cache, pslot);
-	}
-
-	return 0;
-}
-
-int sram_free(const void *addr)
-{
-	if (0) {}
-#if L1_CODE_LENGTH != 0
-	else if (addr >= (void *)L1_CODE_START
-		 && addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))
-		return l1_inst_sram_free(addr);
-#endif
-#if L1_DATA_A_LENGTH != 0
-	else if (addr >= (void *)L1_DATA_A_START
-		 && addr < (void *)(L1_DATA_A_START + L1_DATA_A_LENGTH))
-		return l1_data_A_sram_free(addr);
-#endif
-#if L1_DATA_B_LENGTH != 0
-	else if (addr >= (void *)L1_DATA_B_START
-		 && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
-		return l1_data_B_sram_free(addr);
-#endif
-#if L2_LENGTH != 0
-	else if (addr >= (void *)L2_START
-		 && addr < (void *)(L2_START + L2_LENGTH))
-		return l2_sram_free(addr);
-#endif
-	else
-		return -1;
-}
-EXPORT_SYMBOL(sram_free);
-
-void *l1_data_A_sram_alloc(size_t size)
-{
-	unsigned long flags;
-	void *addr = NULL;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l1_data_sram_lock, flags);
-
-#if L1_DATA_A_LENGTH != 0
-	addr = _sram_alloc(size, &free_l1_data_A_sram_head,
-			&used_l1_data_A_sram_head);
-#endif
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
-
-	pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n",
-		 (long unsigned int)addr, size);
-
-	return addr;
-}
-EXPORT_SYMBOL(l1_data_A_sram_alloc);
-
-int l1_data_A_sram_free(const void *addr)
-{
-	unsigned long flags;
-	int ret;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l1_data_sram_lock, flags);
-
-#if L1_DATA_A_LENGTH != 0
-	ret = _sram_free(addr, &free_l1_data_A_sram_head,
-			&used_l1_data_A_sram_head);
-#else
-	ret = -1;
-#endif
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(l1_data_A_sram_free);
-
-void *l1_data_B_sram_alloc(size_t size)
-{
-#if L1_DATA_B_LENGTH != 0
-	unsigned long flags;
-	void *addr;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l1_data_sram_lock, flags);
-
-	addr = _sram_alloc(size, &free_l1_data_B_sram_head,
-			&used_l1_data_B_sram_head);
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
-
-	pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n",
-		 (long unsigned int)addr, size);
-
-	return addr;
-#else
-	return NULL;
-#endif
-}
-EXPORT_SYMBOL(l1_data_B_sram_alloc);
-
-int l1_data_B_sram_free(const void *addr)
-{
-#if L1_DATA_B_LENGTH != 0
-	unsigned long flags;
-	int ret;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l1_data_sram_lock, flags);
-
-	ret = _sram_free(addr, &free_l1_data_B_sram_head,
-			&used_l1_data_B_sram_head);
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
-
-	return ret;
-#else
-	return -1;
-#endif
-}
-EXPORT_SYMBOL(l1_data_B_sram_free);
-
-void *l1_data_sram_alloc(size_t size)
-{
-	void *addr = l1_data_A_sram_alloc(size);
-
-	if (!addr)
-		addr = l1_data_B_sram_alloc(size);
-
-	return addr;
-}
-EXPORT_SYMBOL(l1_data_sram_alloc);
-
-void *l1_data_sram_zalloc(size_t size)
-{
-	void *addr = l1_data_sram_alloc(size);
-
-	if (addr)
-		memset(addr, 0x00, size);
-
-	return addr;
-}
-EXPORT_SYMBOL(l1_data_sram_zalloc);
-
-int l1_data_sram_free(const void *addr)
-{
-	int ret;
-	ret = l1_data_A_sram_free(addr);
-	if (ret == -1)
-		ret = l1_data_B_sram_free(addr);
-	return ret;
-}
-EXPORT_SYMBOL(l1_data_sram_free);
-
-void *l1_inst_sram_alloc(size_t size)
-{
-#if L1_CODE_LENGTH != 0
-	unsigned long flags;
-	void *addr;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l1_inst_sram_lock, flags);
-
-	addr = _sram_alloc(size, &free_l1_inst_sram_head,
-			&used_l1_inst_sram_head);
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
-
-	pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n",
-		 (long unsigned int)addr, size);
-
-	return addr;
-#else
-	return NULL;
-#endif
-}
-EXPORT_SYMBOL(l1_inst_sram_alloc);
-
-int l1_inst_sram_free(const void *addr)
-{
-#if L1_CODE_LENGTH != 0
-	unsigned long flags;
-	int ret;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l1_inst_sram_lock, flags);
-
-	ret = _sram_free(addr, &free_l1_inst_sram_head,
-			&used_l1_inst_sram_head);
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
-
-	return ret;
-#else
-	return -1;
-#endif
-}
-EXPORT_SYMBOL(l1_inst_sram_free);
-
-/* L1 Scratchpad memory allocate function */
-void *l1sram_alloc(size_t size)
-{
-	unsigned long flags;
-	void *addr;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l1sram_lock, flags);
-
-	addr = _sram_alloc(size, &free_l1_ssram_head,
-			&used_l1_ssram_head);
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l1sram_lock, flags);
-
-	return addr;
-}
-
-/* L1 Scratchpad memory allocate function */
-void *l1sram_alloc_max(size_t *psize)
-{
-	unsigned long flags;
-	void *addr;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l1sram_lock, flags);
-
-	addr = _sram_alloc_max(&free_l1_ssram_head,
-			&used_l1_ssram_head, psize);
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l1sram_lock, flags);
-
-	return addr;
-}
-
-/* L1 Scratchpad memory free function */
-int l1sram_free(const void *addr)
-{
-	unsigned long flags;
-	int ret;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l1sram_lock, flags);
-
-	ret = _sram_free(addr, &free_l1_ssram_head,
-			&used_l1_ssram_head);
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l1sram_lock, flags);
-
-	return ret;
-}
-
-void *l2_sram_alloc(size_t size)
-{
-#if L2_LENGTH != 0
-	unsigned long flags;
-	void *addr;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l2_sram_lock, flags);
-
-	addr = _sram_alloc(size, &free_l2_sram_head,
-			&used_l2_sram_head);
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l2_sram_lock, flags);
-
-	pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
-		 (long unsigned int)addr, size);
-
-	return addr;
-#else
-	return NULL;
-#endif
-}
-EXPORT_SYMBOL(l2_sram_alloc);
-
-void *l2_sram_zalloc(size_t size)
-{
-	void *addr = l2_sram_alloc(size);
-
-	if (addr)
-		memset(addr, 0x00, size);
-
-	return addr;
-}
-EXPORT_SYMBOL(l2_sram_zalloc);
-
-int l2_sram_free(const void *addr)
-{
-#if L2_LENGTH != 0
-	unsigned long flags;
-	int ret;
-
-	/* add mutex operation */
-	spin_lock_irqsave(&l2_sram_lock, flags);
-
-	ret = _sram_free(addr, &free_l2_sram_head,
-			&used_l2_sram_head);
-
-	/* add mutex operation */
-	spin_unlock_irqrestore(&l2_sram_lock, flags);
-
-	return ret;
-#else
-	return -1;
-#endif
-}
-EXPORT_SYMBOL(l2_sram_free);
-
-int sram_free_with_lsl(const void *addr)
-{
-	struct sram_list_struct *lsl, **tmp;
-	struct mm_struct *mm = current->mm;
-
-	for (tmp = &mm->context.sram_list; *tmp; tmp = &(*tmp)->next)
-		if ((*tmp)->addr == addr)
-			goto found;
-	return -1;
-found:
-	lsl = *tmp;
-	sram_free(addr);
-	*tmp = lsl->next;
-	kfree(lsl);
-
-	return 0;
-}
-EXPORT_SYMBOL(sram_free_with_lsl);
-
-void *sram_alloc_with_lsl(size_t size, unsigned long flags)
-{
-	void *addr = NULL;
-	struct sram_list_struct *lsl = NULL;
-	struct mm_struct *mm = current->mm;
-
-	lsl = kzalloc(sizeof(struct sram_list_struct), GFP_KERNEL);
-	if (!lsl)
-		return NULL;
-
-	if (flags & L1_INST_SRAM)
-		addr = l1_inst_sram_alloc(size);
-
-	if (addr == NULL && (flags & L1_DATA_A_SRAM))
-		addr = l1_data_A_sram_alloc(size);
-
-	if (addr == NULL && (flags & L1_DATA_B_SRAM))
-		addr = l1_data_B_sram_alloc(size);
-
-	if (addr == NULL && (flags & L2_SRAM))
-		addr = l2_sram_alloc(size);
-
-	if (addr == NULL) {
-		kfree(lsl);
-		return NULL;
-	}
-	lsl->addr = addr;
-	lsl->length = size;
-	lsl->next = mm->context.sram_list;
-	mm->context.sram_list = lsl;
-	return addr;
-}
-EXPORT_SYMBOL(sram_alloc_with_lsl);
-
-#ifdef CONFIG_PROC_FS
-/* Once we get a real allocator, we'll throw all of this away.
- * Until then, we need some sort of visibility into the L1 alloc.
- */
-/* Need to keep line of output the same.  Currently, that is 44 bytes
- * (including newline).
- */
-static int _sram_proc_read(char *buf, int *len, int count, const char *desc,
-		struct sram_piece *pfree_head,
-		struct sram_piece *pused_head)
-{
-	struct sram_piece *pslot;
-
-	if (!pfree_head || !pused_head)
-		return -1;
-
-	*len += sprintf(&buf[*len], "--- SRAM %-14s Size   PID State     \n", desc);
-
-	/* search the relevant memory slot */
-	pslot = pused_head->next;
-
-	while (pslot != NULL) {
-		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
-			pslot->paddr, pslot->paddr + pslot->size,
-			pslot->size, pslot->pid, "ALLOCATED");
-
-		pslot = pslot->next;
-	}
-
-	pslot = pfree_head->next;
-
-	while (pslot != NULL) {
-		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
-			pslot->paddr, pslot->paddr + pslot->size,
-			pslot->size, pslot->pid, "FREE");
-
-		pslot = pslot->next;
-	}
-
-	return 0;
-}
-static int sram_proc_read(char *buf, char **start, off_t offset, int count,
-		int *eof, void *data)
-{
-	int len = 0;
-
-	if (_sram_proc_read(buf, &len, count, "Scratchpad",
-			&free_l1_ssram_head, &used_l1_ssram_head))
-		goto not_done;
-#if L1_DATA_A_LENGTH != 0
-	if (_sram_proc_read(buf, &len, count, "L1 Data A",
-			&free_l1_data_A_sram_head,
-			&used_l1_data_A_sram_head))
-		goto not_done;
-#endif
-#if L1_DATA_B_LENGTH != 0
-	if (_sram_proc_read(buf, &len, count, "L1 Data B",
-			&free_l1_data_B_sram_head,
-			&used_l1_data_B_sram_head))
-		goto not_done;
-#endif
-#if L1_CODE_LENGTH != 0
-	if (_sram_proc_read(buf, &len, count, "L1 Instruction",
-			&free_l1_inst_sram_head, &used_l1_inst_sram_head))
-		goto not_done;
-#endif
-#if L2_LENGTH != 0
-	if (_sram_proc_read(buf, &len, count, "L2",
-			&free_l2_sram_head, &used_l2_sram_head))
-		goto not_done;
-#endif
-
-	*eof = 1;
- not_done:
-	return len;
-}
-
-static int __init sram_proc_init(void)
-{
-	struct proc_dir_entry *ptr;
-	ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
-	if (!ptr) {
-		printk(KERN_WARNING "unable to create /proc/sram\n");
-		return -1;
-	}
-	ptr->owner = THIS_MODULE;
-	ptr->read_proc = sram_proc_read;
-	return 0;
-}
-late_initcall(sram_proc_init);
-#endif
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
new file mode 100644
index 0000000..22913e7
--- /dev/null
+++ b/arch/blackfin/mm/isram-driver.c
@@ -0,0 +1,201 @@
+/*
+ * Description: Instruction SRAM accessor functions for the Blackfin
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+
+#include <asm/blackfin.h>
+
+/*
+ * IMPORTANT WARNING ABOUT THESE FUNCTIONS
+ *
+ * The emulator will not function correctly if a write command is left in
+ * ITEST_COMMAND or DTEST_COMMAND AND access to cache memory is needed by
+ * the emulator. To avoid such problems, ensure that both ITEST_COMMAND
+ * and DTEST_COMMAND are zero when exiting these functions.
+ */
+
+
+/*
+ * On the Blackfin, L1 instruction sram (which operates at core speeds) can not
+ * be accessed by a normal core load, so we need to go through a few hoops to
+ * read/write it.
+ * To try to make it easier - we export a memcpy interface, where either src or
+ * dest can be in this special L1 memory area.
+ * The low level read/write functions should not be exposed to the rest of the
+ * kernel, since they operate on 64-bit data, and need specific address alignment
+ */
+
+static DEFINE_SPINLOCK(dtest_lock);
+
+/* Takes a void pointer */
+#define IADDR2DTEST(x) \
+	({ unsigned long __addr = (unsigned long)(x); \
+		(__addr & 0x47F8)        | /* address bits 14 & 10:3 */ \
+		(__addr & 0x0800) << 15  | /* address bit  11        */ \
+		(__addr  & 0x3000) << 4  | /* address bits 13:12     */ \
+		(__addr  & 0x8000) << 8  | /* address bit  15        */ \
+		(0x1000004);               /* isram access           */ \
+	})
+
+/* Takes a pointer, and returns the offset (in bits) which things should be shifted */
+#define ADDR2OFFSET(x) ((((unsigned long)(x)) & 0x7) * 8)
+
+/* Takes a pointer, determines if it is the last byte in the isram 64-bit data type */
+#define ADDR2LAST(x) ((((unsigned long)x) & 0x7) == 0x7)
+
+static void isram_write(const void *addr, uint64_t data)
+{
+	uint32_t cmd;
+	unsigned long flags;
+
+	if (addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH))
+		return;
+
+	cmd = IADDR2DTEST(addr) | 1;             /* write */
+
+	/*
+	 * Writes to DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
+	 * While in exception context - atomicity is guaranteed or double fault
+	 */
+	spin_lock_irqsave(&dtest_lock, flags);
+
+	bfin_write_DTEST_DATA0(data & 0xFFFFFFFF);
+	bfin_write_DTEST_DATA1(data >> 32);
+
+	/* use the builtin, since interrupts are already turned off */
+	__builtin_bfin_csync();
+	bfin_write_DTEST_COMMAND(cmd);
+	__builtin_bfin_csync();
+
+	bfin_write_DTEST_COMMAND(0);
+	__builtin_bfin_csync();
+
+	spin_unlock_irqrestore(&dtest_lock, flags);
+}
+
+static uint64_t isram_read(const void *addr)
+{
+	uint32_t cmd;
+	unsigned long flags;
+	uint64_t ret;
+
+	if (addr > (void *)(L1_CODE_START + L1_CODE_LENGTH))
+		return 0;
+
+	cmd = IADDR2DTEST(addr) | 0;              /* read */
+
+	/*
+	 * Reads of DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
+	 * While in exception context - atomicity is guaranteed or double fault
+	 */
+	spin_lock_irqsave(&dtest_lock, flags);
+	/* use the builtin, since interrupts are already turned off */
+	__builtin_bfin_csync();
+	bfin_write_DTEST_COMMAND(cmd);
+	__builtin_bfin_csync();
+	ret = bfin_read_DTEST_DATA0() | ((uint64_t)bfin_read_DTEST_DATA1() << 32);
+
+	bfin_write_DTEST_COMMAND(0);
+	__builtin_bfin_csync();
+	spin_unlock_irqrestore(&dtest_lock, flags);
+
+	return ret;
+}
+
+static bool isram_check_addr(const void *addr, size_t n)
+{
+	if ((addr >= (void *)L1_CODE_START) &&
+	    (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
+		if ((addr + n) >= (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
+			show_stack(NULL, NULL);
+			printk(KERN_ERR "isram_memcpy: copy involving %p length "
+					"(%zu) too long\n", addr, n);
+		}
+		return true;
+	}
+	return false;
+}
+
+/*
+ * The isram_memcpy() function copies n bytes from memory area src to memory area dest.
+ * The isram_memcpy() function returns a pointer to dest.
+ * Either dest or src can be in L1 instruction sram.
+ */
+void *isram_memcpy(void *dest, const void *src, size_t n)
+{
+	uint64_t data_in = 0, data_out = 0;
+	size_t count;
+	bool dest_in_l1, src_in_l1, need_data, put_data;
+	unsigned char byte, *src_byte, *dest_byte;
+
+	src_byte = (unsigned char *)src;
+	dest_byte = (unsigned char *)dest;
+
+	dest_in_l1 = isram_check_addr(dest, n);
+	src_in_l1 = isram_check_addr(src, n);
+
+	need_data = true;
+	put_data = true;
+	for (count = 0; count < n; count++) {
+		if (src_in_l1) {
+			if (need_data) {
+				data_in = isram_read(src + count);
+				need_data = false;
+			}
+
+			if (ADDR2LAST(src + count))
+				need_data = true;
+
+			byte = (unsigned char)((data_in >> ADDR2OFFSET(src + count)) & 0xff);
+
+		} else {
+			/* src is in L2 or L3 - so just dereference*/
+			byte = src_byte[count];
+		}
+
+		if (dest_in_l1) {
+			if (put_data) {
+				data_out = isram_read(dest + count);
+				put_data = false;
+			}
+
+			data_out &= ~((uint64_t)0xff << ADDR2OFFSET(dest + count));
+			data_out |= ((uint64_t)byte << ADDR2OFFSET(dest + count));
+
+			if (ADDR2LAST(dest + count)) {
+				put_data = true;
+				isram_write(dest + count, data_out);
+			}
+		} else {
+			/* dest in L2 or L3 - so just dereference */
+			dest_byte[count] = byte;
+		}
+	}
+
+	/* make sure we dump the last byte if necessary */
+	if (dest_in_l1 && !put_data)
+		isram_write(dest + count, data_out);
+
+	return dest;
+}
+EXPORT_SYMBOL(isram_memcpy);
+
diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
new file mode 100644
index 0000000..0f1ca69
--- /dev/null
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -0,0 +1,809 @@
+/*
+ * File:         arch/blackfin/mm/sram-alloc.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  SRAM allocator for Blackfin L1 and L2 memory
+ *
+ * Modified:
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/rtc.h>
+#include <asm/blackfin.h>
+#include "blackfin_sram.h"
+
+static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
+static spinlock_t l2_sram_lock;
+
+/* the data structure for L1 scratchpad and DATA SRAM */
+struct sram_piece {
+	void *paddr;
+	int size;
+	pid_t pid;
+	struct sram_piece *next;
+};
+
+static struct sram_piece free_l1_ssram_head, used_l1_ssram_head;
+
+#if L1_DATA_A_LENGTH != 0
+static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head;
+#endif
+
+#if L1_DATA_B_LENGTH != 0
+static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
+#endif
+
+#if L1_CODE_LENGTH != 0
+static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
+#endif
+
+#if L2_LENGTH != 0
+static struct sram_piece free_l2_sram_head, used_l2_sram_head;
+#endif
+
+static struct kmem_cache *sram_piece_cache;
+
+/* L1 Scratchpad SRAM initialization function */
+static void __init l1sram_init(void)
+{
+	free_l1_ssram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_ssram_head.next) {
+		printk(KERN_INFO "Failed to initialize Scratchpad data SRAM\n");
+		return;
+	}
+
+	free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START;
+	free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH;
+	free_l1_ssram_head.next->pid = 0;
+	free_l1_ssram_head.next->next = NULL;
+
+	used_l1_ssram_head.next = NULL;
+
+	/* mutex initialize */
+	spin_lock_init(&l1sram_lock);
+
+	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
+	       L1_SCRATCH_LENGTH >> 10);
+}
+
+static void __init l1_data_sram_init(void)
+{
+#if L1_DATA_A_LENGTH != 0
+	free_l1_data_A_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_data_A_sram_head.next) {
+		printk(KERN_INFO "Failed to initialize L1 Data A SRAM\n");
+		return;
+	}
+
+	free_l1_data_A_sram_head.next->paddr =
+		(void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1);
+	free_l1_data_A_sram_head.next->size =
+		L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
+	free_l1_data_A_sram_head.next->pid = 0;
+	free_l1_data_A_sram_head.next->next = NULL;
+
+	used_l1_data_A_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
+		L1_DATA_A_LENGTH >> 10,
+		free_l1_data_A_sram_head.next->size >> 10);
+#endif
+#if L1_DATA_B_LENGTH != 0
+	free_l1_data_B_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_data_B_sram_head.next) {
+		printk(KERN_INFO "Failed to initialize L1 Data B SRAM\n");
+		return;
+	}
+
+	free_l1_data_B_sram_head.next->paddr =
+		(void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1);
+	free_l1_data_B_sram_head.next->size =
+		L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
+	free_l1_data_B_sram_head.next->pid = 0;
+	free_l1_data_B_sram_head.next->next = NULL;
+
+	used_l1_data_B_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
+		L1_DATA_B_LENGTH >> 10,
+		free_l1_data_B_sram_head.next->size >> 10);
+#endif
+
+	/* mutex initialize */
+	spin_lock_init(&l1_data_sram_lock);
+}
+
+static void __init l1_inst_sram_init(void)
+{
+#if L1_CODE_LENGTH != 0
+	free_l1_inst_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_inst_sram_head.next) {
+		printk(KERN_INFO "Failed to initialize L1 Instruction SRAM\n");
+		return;
+	}
+
+	free_l1_inst_sram_head.next->paddr =
+		(void *)L1_CODE_START + (_etext_l1 - _stext_l1);
+	free_l1_inst_sram_head.next->size =
+		L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
+	free_l1_inst_sram_head.next->pid = 0;
+	free_l1_inst_sram_head.next->next = NULL;
+
+	used_l1_inst_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
+		L1_CODE_LENGTH >> 10,
+		free_l1_inst_sram_head.next->size >> 10);
+#endif
+
+	/* mutex initialize */
+	spin_lock_init(&l1_inst_sram_lock);
+}
+
+static void __init l2_sram_init(void)
+{
+#if L2_LENGTH != 0
+	free_l2_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l2_sram_head.next) {
+		printk(KERN_INFO "Failed to initialize L2 SRAM\n");
+		return;
+	}
+
+	free_l2_sram_head.next->paddr = (void *)L2_START +
+		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+	free_l2_sram_head.next->size = L2_LENGTH -
+		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+	free_l2_sram_head.next->pid = 0;
+	free_l2_sram_head.next->next = NULL;
+
+	used_l2_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
+		L2_LENGTH >> 10,
+		free_l2_sram_head.next->size >> 10);
+#endif
+
+	/* mutex initialize */
+	spin_lock_init(&l2_sram_lock);
+}
+void __init bfin_sram_init(void)
+{
+	sram_piece_cache = kmem_cache_create("sram_piece_cache",
+				sizeof(struct sram_piece),
+				0, SLAB_PANIC, NULL);
+
+	l1sram_init();
+	l1_data_sram_init();
+	l1_inst_sram_init();
+	l2_sram_init();
+}
+
+/* SRAM allocate function */
+static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
+{
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (size <= 0 || !pfree_head || !pused_head)
+		return NULL;
+
+	/* Align the size */
+	size = (size + 3) & ~3;
+
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && size > pslot->size) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	if (!pslot)
+		return NULL;
+
+	if (pslot->size == size) {
+		plast->next = pslot->next;
+		pavail = pslot;
+	} else {
+		pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+
+		if (!pavail)
+			return NULL;
+
+		pavail->paddr = pslot->paddr;
+		pavail->size = size;
+		pslot->paddr += size;
+		pslot->size -= size;
+	}
+
+	pavail->pid = current->pid;
+
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* insert new piece into used piece list !!! */
+	while (pslot != NULL && pavail->paddr < pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	pavail->next = pslot;
+	plast->next = pavail;
+
+	return pavail->paddr;
+}
+
+/* Allocate the largest available block.  */
+static void *_sram_alloc_max(struct sram_piece *pfree_head,
+				struct sram_piece *pused_head,
+				unsigned long *psize)
+{
+	struct sram_piece *pslot, *pmax;
+
+	if (!pfree_head || !pused_head)
+		return NULL;
+
+	pmax = pslot = pfree_head->next;
+
+	/* search an available piece slot */
+	while (pslot != NULL) {
+		if (pslot->size > pmax->size)
+			pmax = pslot;
+		pslot = pslot->next;
+	}
+
+	if (!pmax)
+		return NULL;
+
+	*psize = pmax->size;
+
+	return _sram_alloc(*psize, pfree_head, pused_head);
+}
+
+/* SRAM free function */
+static int _sram_free(const void *addr,
+			struct sram_piece *pfree_head,
+			struct sram_piece *pused_head)
+{
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (!pfree_head || !pused_head)
+		return -1;
+
+	/* search the relevant memory slot */
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && pslot->paddr != addr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	if (!pslot)
+		return -1;
+
+	plast->next = pslot->next;
+	pavail = pslot;
+	pavail->pid = 0;
+
+	/* insert free pieces back to the free list */
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	while (pslot != NULL && addr > pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
+		plast->size += pavail->size;
+		kmem_cache_free(sram_piece_cache, pavail);
+	} else {
+		pavail->next = plast->next;
+		plast->next = pavail;
+		plast = pavail;
+	}
+
+	if (pslot && plast->paddr + plast->size == pslot->paddr) {
+		plast->size += pslot->size;
+		plast->next = pslot->next;
+		kmem_cache_free(sram_piece_cache, pslot);
+	}
+
+	return 0;
+}
+
+int sram_free(const void *addr)
+{
+
+#if L1_CODE_LENGTH != 0
+	if (addr >= (void *)L1_CODE_START
+		 && addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))
+		return l1_inst_sram_free(addr);
+	else
+#endif
+#if L1_DATA_A_LENGTH != 0
+	if (addr >= (void *)L1_DATA_A_START
+		 && addr < (void *)(L1_DATA_A_START + L1_DATA_A_LENGTH))
+		return l1_data_A_sram_free(addr);
+	else
+#endif
+#if L1_DATA_B_LENGTH != 0
+	if (addr >= (void *)L1_DATA_B_START
+		 && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
+		return l1_data_B_sram_free(addr);
+	else
+#endif
+#if L2_LENGTH != 0
+	if (addr >= (void *)L2_START
+		 && addr < (void *)(L2_START + L2_LENGTH))
+		return l2_sram_free(addr);
+	else
+#endif
+		return -1;
+}
+EXPORT_SYMBOL(sram_free);
+
+void *l1_data_A_sram_alloc(size_t size)
+{
+	unsigned long flags;
+	void *addr = NULL;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+#if L1_DATA_A_LENGTH != 0
+	addr = _sram_alloc(size, &free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head);
+#endif
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+	pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l1_data_A_sram_alloc);
+
+int l1_data_A_sram_free(const void *addr)
+{
+	unsigned long flags;
+	int ret;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+#if L1_DATA_A_LENGTH != 0
+	ret = _sram_free(addr, &free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head);
+#else
+	ret = -1;
+#endif
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(l1_data_A_sram_free);
+
+void *l1_data_B_sram_alloc(size_t size)
+{
+#if L1_DATA_B_LENGTH != 0
+	unsigned long flags;
+	void *addr;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+	addr = _sram_alloc(size, &free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+	pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_data_B_sram_alloc);
+
+int l1_data_B_sram_free(const void *addr)
+{
+#if L1_DATA_B_LENGTH != 0
+	unsigned long flags;
+	int ret;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+	ret = _sram_free(addr, &free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_data_B_sram_free);
+
+void *l1_data_sram_alloc(size_t size)
+{
+	void *addr = l1_data_A_sram_alloc(size);
+
+	if (!addr)
+		addr = l1_data_B_sram_alloc(size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l1_data_sram_alloc);
+
+void *l1_data_sram_zalloc(size_t size)
+{
+	void *addr = l1_data_sram_alloc(size);
+
+	if (addr)
+		memset(addr, 0x00, size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l1_data_sram_zalloc);
+
+int l1_data_sram_free(const void *addr)
+{
+	int ret;
+	ret = l1_data_A_sram_free(addr);
+	if (ret == -1)
+		ret = l1_data_B_sram_free(addr);
+	return ret;
+}
+EXPORT_SYMBOL(l1_data_sram_free);
+
+void *l1_inst_sram_alloc(size_t size)
+{
+#if L1_CODE_LENGTH != 0
+	unsigned long flags;
+	void *addr;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l1_inst_sram_lock, flags);
+
+	addr = _sram_alloc(size, &free_l1_inst_sram_head,
+			&used_l1_inst_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
+
+	pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_inst_sram_alloc);
+
+int l1_inst_sram_free(const void *addr)
+{
+#if L1_CODE_LENGTH != 0
+	unsigned long flags;
+	int ret;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l1_inst_sram_lock, flags);
+
+	ret = _sram_free(addr, &free_l1_inst_sram_head,
+			&used_l1_inst_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_inst_sram_free);
+
+/* L1 Scratchpad memory allocate function */
+void *l1sram_alloc(size_t size)
+{
+	unsigned long flags;
+	void *addr;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l1sram_lock, flags);
+
+	addr = _sram_alloc(size, &free_l1_ssram_head,
+			&used_l1_ssram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l1sram_lock, flags);
+
+	return addr;
+}
+
+/* L1 Scratchpad memory allocate function */
+void *l1sram_alloc_max(size_t *psize)
+{
+	unsigned long flags;
+	void *addr;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l1sram_lock, flags);
+
+	addr = _sram_alloc_max(&free_l1_ssram_head,
+			&used_l1_ssram_head, psize);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l1sram_lock, flags);
+
+	return addr;
+}
+
+/* L1 Scratchpad memory free function */
+int l1sram_free(const void *addr)
+{
+	unsigned long flags;
+	int ret;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l1sram_lock, flags);
+
+	ret = _sram_free(addr, &free_l1_ssram_head,
+			&used_l1_ssram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l1sram_lock, flags);
+
+	return ret;
+}
+
+void *l2_sram_alloc(size_t size)
+{
+#if L2_LENGTH != 0
+	unsigned long flags;
+	void *addr;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	addr = _sram_alloc(size, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_alloc);
+
+void *l2_sram_zalloc(size_t size)
+{
+	void *addr = l2_sram_alloc(size);
+
+	if (addr)
+		memset(addr, 0x00, size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l2_sram_zalloc);
+
+int l2_sram_free(const void *addr)
+{
+#if L2_LENGTH != 0
+	unsigned long flags;
+	int ret;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	ret = _sram_free(addr, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_free);
+
+int sram_free_with_lsl(const void *addr)
+{
+	struct sram_list_struct *lsl, **tmp;
+	struct mm_struct *mm = current->mm;
+
+	for (tmp = &mm->context.sram_list; *tmp; tmp = &(*tmp)->next)
+		if ((*tmp)->addr == addr)
+			goto found;
+	return -1;
+found:
+	lsl = *tmp;
+	sram_free(addr);
+	*tmp = lsl->next;
+	kfree(lsl);
+
+	return 0;
+}
+EXPORT_SYMBOL(sram_free_with_lsl);
+
+void *sram_alloc_with_lsl(size_t size, unsigned long flags)
+{
+	void *addr = NULL;
+	struct sram_list_struct *lsl = NULL;
+	struct mm_struct *mm = current->mm;
+
+	lsl = kzalloc(sizeof(struct sram_list_struct), GFP_KERNEL);
+	if (!lsl)
+		return NULL;
+
+	if (flags & L1_INST_SRAM)
+		addr = l1_inst_sram_alloc(size);
+
+	if (addr == NULL && (flags & L1_DATA_A_SRAM))
+		addr = l1_data_A_sram_alloc(size);
+
+	if (addr == NULL && (flags & L1_DATA_B_SRAM))
+		addr = l1_data_B_sram_alloc(size);
+
+	if (addr == NULL && (flags & L2_SRAM))
+		addr = l2_sram_alloc(size);
+
+	if (addr == NULL) {
+		kfree(lsl);
+		return NULL;
+	}
+	lsl->addr = addr;
+	lsl->length = size;
+	lsl->next = mm->context.sram_list;
+	mm->context.sram_list = lsl;
+	return addr;
+}
+EXPORT_SYMBOL(sram_alloc_with_lsl);
+
+#ifdef CONFIG_PROC_FS
+/* Once we get a real allocator, we'll throw all of this away.
+ * Until then, we need some sort of visibility into the L1 alloc.
+ */
+/* Need to keep line of output the same.  Currently, that is 44 bytes
+ * (including newline).
+ */
+static int _sram_proc_read(char *buf, int *len, int count, const char *desc,
+		struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
+{
+	struct sram_piece *pslot;
+
+	if (!pfree_head || !pused_head)
+		return -1;
+
+	*len += sprintf(&buf[*len], "--- SRAM %-14s Size   PID State     \n", desc);
+
+	/* search the relevant memory slot */
+	pslot = pused_head->next;
+
+	while (pslot != NULL) {
+		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "ALLOCATED");
+
+		pslot = pslot->next;
+	}
+
+	pslot = pfree_head->next;
+
+	while (pslot != NULL) {
+		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "FREE");
+
+		pslot = pslot->next;
+	}
+
+	return 0;
+}
+static int sram_proc_read(char *buf, char **start, off_t offset, int count,
+		int *eof, void *data)
+{
+	int len = 0;
+
+	if (_sram_proc_read(buf, &len, count, "Scratchpad",
+			&free_l1_ssram_head, &used_l1_ssram_head))
+		goto not_done;
+#if L1_DATA_A_LENGTH != 0
+	if (_sram_proc_read(buf, &len, count, "L1 Data A",
+			&free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head))
+		goto not_done;
+#endif
+#if L1_DATA_B_LENGTH != 0
+	if (_sram_proc_read(buf, &len, count, "L1 Data B",
+			&free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head))
+		goto not_done;
+#endif
+#if L1_CODE_LENGTH != 0
+	if (_sram_proc_read(buf, &len, count, "L1 Instruction",
+			&free_l1_inst_sram_head, &used_l1_inst_sram_head))
+		goto not_done;
+#endif
+#if L2_LENGTH != 0
+	if (_sram_proc_read(buf, &len, count, "L2",
+			&free_l2_sram_head, &used_l2_sram_head))
+		goto not_done;
+#endif
+
+	*eof = 1;
+ not_done:
+	return len;
+}
+
+static int __init sram_proc_init(void)
+{
+	struct proc_dir_entry *ptr;
+	ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
+	if (!ptr) {
+		printk(KERN_WARNING "unable to create /proc/sram\n");
+		return -1;
+	}
+	ptr->owner = THIS_MODULE;
+	ptr->read_proc = sram_proc_read;
+	return 0;
+}
+late_initcall(sram_proc_init);
+#endif
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 9389d38..b17aeea 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -62,6 +62,8 @@ config HZ
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "General setup"
 
 source "fs/Kconfig.binfmt"
@@ -677,6 +679,8 @@ source "fs/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "arch/cris/Kconfig.debug"
 
 source "security/Kconfig"
diff --git a/arch/cris/Makefile b/arch/cris/Makefile
index 838cd2a..c6f5f5a 100644
--- a/arch/cris/Makefile
+++ b/arch/cris/Makefile
@@ -10,6 +10,8 @@
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
 
+KBUILD_DEFCONFIG := etrax-100lx_v2_defconfig
+
 arch-y := v10
 arch-$(CONFIG_ETRAX_ARCH_V10) := v10
 arch-$(CONFIG_ETRAX_ARCH_V32) := v32
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
index 08d943c..6fe0ffa 100644
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ b/arch/cris/arch-v10/boot/compressed/Makefile
@@ -4,7 +4,7 @@
 
 asflags-y += $(LINUXINCLUDE)
 ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(obj)/decompress.ld
+ldflags-y += -T $(srctree)/$(src)/decompress.lds
 OBJECTS = $(obj)/head.o $(obj)/misc.o
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.ld b/arch/cris/arch-v10/boot/compressed/decompress.lds
index e80f459..e80f459 100644
--- a/arch/cris/arch-v10/boot/compressed/decompress.ld
+++ b/arch/cris/arch-v10/boot/compressed/decompress.lds
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
index 07688da..82ab59b 100644
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ b/arch/cris/arch-v10/boot/rescue/Makefile
@@ -4,7 +4,7 @@
 
 ccflags-y += -O2 $(LINUXINCLUDE)
 asflags-y += $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(obj)/rescue.ld
+ldflags-y += -T $(srctree)/$(src)/rescue.lds
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
 OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v10/boot/rescue/rescue.ld b/arch/cris/arch-v10/boot/rescue/rescue.lds
index 0b52a94..0b52a94 100644
--- a/arch/cris/arch-v10/boot/rescue/rescue.ld
+++ b/arch/cris/arch-v10/boot/rescue/rescue.lds
diff --git a/arch/cris/arch-v10/boot/tools/build.c b/arch/cris/arch-v10/boot/tools/build.c
index 2f9bbb2..c8adef3 100644
--- a/arch/cris/arch-v10/boot/tools/build.c
+++ b/arch/cris/arch-v10/boot/tools/build.c
@@ -30,7 +30,6 @@
 #include <sys/sysmacros.h>
 #include <unistd.h>	/* contains read/write */
 #include <fcntl.h>
-#include <linux/a.out.h>
 #include <errno.h>
 
 #define MINIX_HEADER 32
diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c
index c9aa390..3bdfaf4 100644
--- a/arch/cris/arch-v10/drivers/ds1302.c
+++ b/arch/cris/arch-v10/drivers/ds1302.c
@@ -215,12 +215,12 @@ get_rtc_time(struct rtc_time *rtc_tm)
 
 	local_irq_restore(flags);
 	
-	BCD_TO_BIN(rtc_tm->tm_sec);
-	BCD_TO_BIN(rtc_tm->tm_min);
-	BCD_TO_BIN(rtc_tm->tm_hour);
-	BCD_TO_BIN(rtc_tm->tm_mday);
-	BCD_TO_BIN(rtc_tm->tm_mon);
-	BCD_TO_BIN(rtc_tm->tm_year);
+	rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
+	rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
+	rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
+	rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
+	rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
+	rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
 
 	/*
 	 * Account for differences between how the RTC uses the values
@@ -295,12 +295,12 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			else
 				yrs -= 1900;	/* RTC (70, 71, ... 99) */
 
-			BIN_TO_BCD(sec);
-			BIN_TO_BCD(min);
-			BIN_TO_BCD(hrs);
-			BIN_TO_BCD(day);
-			BIN_TO_BCD(mon);
-			BIN_TO_BCD(yrs);
+			sec = bin2bcd(sec);
+			min = bin2bcd(min);
+			hrs = bin2bcd(hrs);
+			day = bin2bcd(day);
+			mon = bin2bcd(mon);
+			yrs = bin2bcd(yrs);
 
 			local_irq_save(flags);
 			CMOS_WRITE(yrs, RTC_YEAR);
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 8769dc91..1e90c1a 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -122,7 +122,7 @@ get_rtc_time(struct rtc_time *tm)
 		       "information is no longer guaranteed!\n", PCF8563_NAME);
 	}
 
-	tm->tm_year  = BCD_TO_BIN(tm->tm_year) +
+	tm->tm_year  = bcd2bin(tm->tm_year) +
 		       ((tm->tm_mon & 0x80) ? 100 : 0);
 	tm->tm_sec  &= 0x7F;
 	tm->tm_min  &= 0x7F;
@@ -131,11 +131,11 @@ get_rtc_time(struct rtc_time *tm)
 	tm->tm_wday &= 0x07; /* Not coded in BCD. */
 	tm->tm_mon  &= 0x1F;
 
-	BCD_TO_BIN(tm->tm_sec);
-	BCD_TO_BIN(tm->tm_min);
-	BCD_TO_BIN(tm->tm_hour);
-	BCD_TO_BIN(tm->tm_mday);
-	BCD_TO_BIN(tm->tm_mon);
+	tm->tm_sec = bcd2bin(tm->tm_sec);
+	tm->tm_min = bcd2bin(tm->tm_min);
+	tm->tm_hour = bcd2bin(tm->tm_hour);
+	tm->tm_mday = bcd2bin(tm->tm_mday);
+	tm->tm_mon = bcd2bin(tm->tm_mon);
 	tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
 }
 
@@ -282,12 +282,12 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 		century = (tm.tm_year >= 2000) ? 0x80 : 0;
 		tm.tm_year = tm.tm_year % 100;
 
-		BIN_TO_BCD(tm.tm_year);
-		BIN_TO_BCD(tm.tm_mon);
-		BIN_TO_BCD(tm.tm_mday);
-		BIN_TO_BCD(tm.tm_hour);
-		BIN_TO_BCD(tm.tm_min);
-		BIN_TO_BCD(tm.tm_sec);
+		tm.tm_year = bin2bcd(tm.tm_year);
+		tm.tm_mon = bin2bcd(tm.tm_mon);
+		tm.tm_mday = bin2bcd(tm.tm_mday);
+		tm.tm_hour = bin2bcd(tm.tm_hour);
+		tm.tm_min = bin2bcd(tm.tm_min);
+		tm.tm_sec = bin2bcd(tm.tm_sec);
 		tm.tm_mon |= century;
 
 		mutex_lock(&rtc_lock);
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
index d6335f2..5a1b31c 100644
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ b/arch/cris/arch-v32/boot/compressed/Makefile
@@ -4,7 +4,7 @@
 
 asflags-y += -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
 ccflags-y += -O2 -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
-ldflags-y += -T $(srctree)/$(obj)/decompress.ld
+ldflags-y += -T $(srctree)/$(src)/decompress.lds
 OBJECTS = $(obj)/head.o $(obj)/misc.o
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
diff --git a/arch/cris/arch-v32/boot/compressed/decompress.ld b/arch/cris/arch-v32/boot/compressed/decompress.lds
index 3c837fe..3c837fe 100644
--- a/arch/cris/arch-v32/boot/compressed/decompress.ld
+++ b/arch/cris/arch-v32/boot/compressed/decompress.lds
diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile
index 44ae0ad..566aac6 100644
--- a/arch/cris/arch-v32/boot/rescue/Makefile
+++ b/arch/cris/arch-v32/boot/rescue/Makefile
@@ -7,7 +7,7 @@ ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
 		-I $(srctree)/include/asm/arch
 asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
 LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(obj)/rescue.ld
+ldflags-y += -T $(srctree)/$(src)/rescue.lds
 LDPOSTFLAGS = -lgcc
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
diff --git a/arch/cris/arch-v32/boot/rescue/rescue.ld b/arch/cris/arch-v32/boot/rescue/rescue.lds
index 8ac646b..8ac646b 100644
--- a/arch/cris/arch-v32/boot/rescue/rescue.ld
+++ b/arch/cris/arch-v32/boot/rescue/rescue.lds
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index f263ab5..f447850 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -118,7 +118,7 @@ get_rtc_time(struct rtc_time *tm)
 		       "information is no longer guaranteed!\n", PCF8563_NAME);
 	}
 
-	tm->tm_year  = BCD_TO_BIN(tm->tm_year) +
+	tm->tm_year  = bcd2bin(tm->tm_year) +
 		       ((tm->tm_mon & 0x80) ? 100 : 0);
 	tm->tm_sec  &= 0x7F;
 	tm->tm_min  &= 0x7F;
@@ -127,11 +127,11 @@ get_rtc_time(struct rtc_time *tm)
 	tm->tm_wday &= 0x07; /* Not coded in BCD. */
 	tm->tm_mon  &= 0x1F;
 
-	BCD_TO_BIN(tm->tm_sec);
-	BCD_TO_BIN(tm->tm_min);
-	BCD_TO_BIN(tm->tm_hour);
-	BCD_TO_BIN(tm->tm_mday);
-	BCD_TO_BIN(tm->tm_mon);
+	tm->tm_sec = bcd2bin(tm->tm_sec);
+	tm->tm_min = bcd2bin(tm->tm_min);
+	tm->tm_hour = bcd2bin(tm->tm_hour);
+	tm->tm_mday = bcd2bin(tm->tm_mday);
+	tm->tm_mon = bcd2bin(tm->tm_mon);
 	tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
 }
 
@@ -279,12 +279,12 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 		century = (tm.tm_year >= 2000) ? 0x80 : 0;
 		tm.tm_year = tm.tm_year % 100;
 
-		BIN_TO_BCD(tm.tm_year);
-		BIN_TO_BCD(tm.tm_mon);
-		BIN_TO_BCD(tm.tm_mday);
-		BIN_TO_BCD(tm.tm_hour);
-		BIN_TO_BCD(tm.tm_min);
-		BIN_TO_BCD(tm.tm_sec);
+		tm.tm_year = bin2bcd(tm.tm_year);
+		tm.tm_mon = bin2bcd(tm.tm_mon);
+		tm.tm_mday = bin2bcd(tm.tm_mday);
+		tm.tm_hour = bin2bcd(tm.tm_hour);
+		tm.tm_min = bin2bcd(tm.tm_min);
+		tm.tm_sec = bin2bcd(tm.tm_sec);
 		tm.tm_mon |= century;
 
 		mutex_lock(&rtc_lock);
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 952a24b..52e16c6 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -178,6 +178,7 @@ void __init smp_callin(void)
 	unmask_irq(IPI_INTR_VECT);
 	unmask_irq(TIMER0_INTR_VECT);
 	preempt_disable();
+	notify_cpu_starting(cpu);
 	local_irq_enable();
 
 	cpu_set(cpu, cpu_online_map);
diff --git a/arch/cris/arch-v32/mach-a3/cpufreq.c b/arch/cris/arch-v32/mach-a3/cpufreq.c
index 8e5a3ca..ee391ec 100644
--- a/arch/cris/arch-v32/mach-a3/cpufreq.c
+++ b/arch/cris/arch-v32/mach-a3/cpufreq.c
@@ -85,7 +85,6 @@ static int cris_freq_cpu_init(struct cpufreq_policy *policy)
 	int result;
 
 	/* cpuinfo and default policy values */
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 	policy->cpuinfo.transition_latency = 1000000; /* 1ms */
 	policy->cur = cris_freq_get_cpu_frequency(0);
 
diff --git a/arch/cris/arch-v32/mach-fs/cpufreq.c b/arch/cris/arch-v32/mach-fs/cpufreq.c
index d57631c..58bd71e 100644
--- a/arch/cris/arch-v32/mach-fs/cpufreq.c
+++ b/arch/cris/arch-v32/mach-fs/cpufreq.c
@@ -81,7 +81,6 @@ static int cris_freq_cpu_init(struct cpufreq_policy *policy)
 	int result;
 
 	/* cpuinfo and default policy values */
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 	policy->cpuinfo.transition_latency = 1000000;	/* 1ms */
 	policy->cur = cris_freq_get_cpu_frequency(0);
 
diff --git a/arch/cris/artpec_3_defconfig b/arch/cris/configs/artpec_3_defconfig
index 41fe674..41fe674 100644
--- a/arch/cris/artpec_3_defconfig
+++ b/arch/cris/configs/artpec_3_defconfig
diff --git a/arch/cris/arch-v10/defconfig b/arch/cris/configs/etrax-100lx_defconfig
index 572f119..572f119 100644
--- a/arch/cris/arch-v10/defconfig
+++ b/arch/cris/configs/etrax-100lx_defconfig
diff --git a/arch/cris/defconfig b/arch/cris/configs/etrax-100lx_v2_defconfig
index 59f36a5..59f36a5 100644
--- a/arch/cris/defconfig
+++ b/arch/cris/configs/etrax-100lx_v2_defconfig
diff --git a/arch/cris/etraxfs_defconfig b/arch/cris/configs/etraxfs_defconfig
index 73c646a..73c646a 100644
--- a/arch/cris/etraxfs_defconfig
+++ b/arch/cris/configs/etraxfs_defconfig
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index ff4c6aa..074fe7d 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -127,7 +127,7 @@ int set_rtc_mmss(unsigned long nowtime)
 		return 0;
 
 	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	BCD_TO_BIN(cmos_minutes);
+	cmos_minutes = bcd2bin(cmos_minutes);
 
 	/*
 	 * since we're only adjusting minutes and seconds,
@@ -142,8 +142,8 @@ int set_rtc_mmss(unsigned long nowtime)
 	real_minutes %= 60;
 
 	if (abs(real_minutes - cmos_minutes) < 30) {
-		BIN_TO_BCD(real_seconds);
-		BIN_TO_BCD(real_minutes);
+		real_seconds = bin2bcd(real_seconds);
+		real_minutes = bin2bcd(real_minutes);
 		CMOS_WRITE(real_seconds,RTC_SECONDS);
 		CMOS_WRITE(real_minutes,RTC_MINUTES);
 	} else {
@@ -170,12 +170,12 @@ get_cmos_time(void)
 	mon = CMOS_READ(RTC_MONTH);
 	year = CMOS_READ(RTC_YEAR);
 
-	BCD_TO_BIN(sec);
-	BCD_TO_BIN(min);
-	BCD_TO_BIN(hour);
-	BCD_TO_BIN(day);
-	BCD_TO_BIN(mon);
-	BCD_TO_BIN(year);
+	sec = bcd2bin(sec);
+	min = bcd2bin(min);
+	hour = bcd2bin(hour);
+	day = bcd2bin(day);
+	mon = bcd2bin(mon);
+	year = bcd2bin(year);
 
 	if ((year += 1900) < 1970)
 		year += 100;
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index a5aac1b..9d1552a 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -66,6 +66,8 @@ mainmenu "Fujitsu FR-V Kernel Configuration"
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 
 menu "Fujitsu FR-V system setup"
 
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index d1113c5..be722fc 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -211,7 +211,7 @@ static int cmode_procctl(ctl_table *ctl, int write, struct file *filp,
 	return try_set_cmode(new_cmode)?:*lenp;
 }
 
-static int cmode_sysctl(ctl_table *table, int __user *name, int nlen,
+static int cmode_sysctl(ctl_table *table,
 			void __user *oldval, size_t __user *oldlenp,
 			void __user *newval, size_t newlen)
 {
@@ -314,7 +314,7 @@ static int p0_procctl(ctl_table *ctl, int write, struct file *filp,
 	return try_set_p0(new_p0)?:*lenp;
 }
 
-static int p0_sysctl(ctl_table *table, int __user *name, int nlen,
+static int p0_sysctl(ctl_table *table,
 		     void __user *oldval, size_t __user *oldlenp,
 		     void __user *newval, size_t newlen)
 {
@@ -358,7 +358,7 @@ static int cm_procctl(ctl_table *ctl, int write, struct file *filp,
 	return try_set_cm(new_cm)?:*lenp;
 }
 
-static int cm_sysctl(ctl_table *table, int __user *name, int nlen,
+static int cm_sysctl(ctl_table *table,
 		     void __user *oldval, size_t __user *oldlenp,
 		     void __user *newval, size_t newlen)
 {
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 64ee58d..52ff9ae 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -111,7 +111,7 @@ EXPORT_SYMBOL(dma_free_coherent);
  * The 32-bit bus address to use is returned.
  *
  * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
+ * until either dma_unmap_single or pci_dma_sync_single is performed.
  */
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
@@ -129,7 +129,7 @@ EXPORT_SYMBOL(dma_map_single);
 /*
  * Map a set of buffers described by scatterlist in streaming
  * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
+ * above dma_map_single interface.  Here the scatter gather list
  * elements are each tagged with the appropriate dma address
  * and length.  They are obtained via sg_dma_{address,length}(SG).
  *
@@ -139,7 +139,7 @@ EXPORT_SYMBOL(dma_map_single);
  *       The routine returns the number of addr/length pairs actually
  *       used, at most nents.
  *
- * Device ownership issues as mentioned above for pci_map_single are
+ * Device ownership issues as mentioned above for dma_map_single are
  * the same here.
  */
 int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
@@ -158,3 +158,20 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 }
 
 EXPORT_SYMBOL(dma_map_sg);
+
+/*
+ * Map a single page of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Device ownership issues as mentioned above for dma_map_single are
+ * the same here.
+ */
+dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+			size_t size, enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	flush_dcache_page(page);
+	return (dma_addr_t) page_to_phys(page) + offset;
+}
+
+EXPORT_SYMBOL(dma_map_page);
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 662f7b12..3ddedeb 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -61,7 +61,7 @@ EXPORT_SYMBOL(dma_map_single);
 /*
  * Map a set of buffers described by scatterlist in streaming
  * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
+ * above dma_map_single interface.  Here the scatter gather list
  * elements are each tagged with the appropriate dma address
  * and length.  They are obtained via sg_dma_{address,length}(SG).
  *
@@ -71,7 +71,7 @@ EXPORT_SYMBOL(dma_map_single);
  *       The routine returns the number of addr/length pairs actually
  *       used, at most nents.
  *
- * Device ownership issues as mentioned above for pci_map_single are
+ * Device ownership issues as mentioned above for dma_map_single are
  * the same here.
  */
 int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
@@ -105,6 +105,13 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 
 EXPORT_SYMBOL(dma_map_sg);
 
+/*
+ * Map a single page of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Device ownership issues as mentioned above for dma_map_single are
+ * the same here.
+ */
 dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
 			size_t size, enum dma_data_direction direction)
 {
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index edae117..43d6753 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -201,38 +201,6 @@ void __init pcibios_resource_survey(void)
 	pcibios_assign_resources();
 }
 
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for(idx=0; idx<6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1<<idx)))
-			continue;
-
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
diff --git a/arch/frv/mb93090-mb00/pci-frv.h b/arch/frv/mb93090-mb00/pci-frv.h
index 0c7bf39..f3fe5591 100644
--- a/arch/frv/mb93090-mb00/pci-frv.h
+++ b/arch/frv/mb93090-mb00/pci-frv.h
@@ -29,7 +29,6 @@ extern unsigned int __nongpreldata pci_probe;
 extern unsigned int pcibios_max_latency;
 
 void pcibios_resource_survey(void);
-int pcibios_enable_resources(struct pci_dev *, int);
 
 /* pci-vdk.c */
 
diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
index f003cfa..0f41c3a 100644
--- a/arch/frv/mb93090-mb00/pci-vdk.c
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -412,7 +412,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
 	int err;
 
-	if ((err = pcibios_enable_resources(dev, mask)) < 0)
+	if ((err = pci_enable_resources(dev, mask)) < 0)
 		return err;
 	if (!dev->msi_enabled)
 		pcibios_enable_irq(dev);
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 1b851db..0708284 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -87,8 +87,6 @@ void __init paging_init(void)
 
 		pkmap_page_table = alloc_bootmem_pages(PAGE_SIZE);
 
-		memset(pkmap_page_table, 0, PAGE_SIZE);
-
 		pge = swapper_pg_dir + pgd_index_k(PKMAP_BASE);
 		pue = pud_offset(pge, PKMAP_BASE);
 		pme = pmd_offset(pue, PKMAP_BASE);
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 396ab05..28f06fd 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -62,13 +62,14 @@ config GENERIC_TIME
 	bool
 	default y
 
+config GENERIC_BUG
+        bool
+        depends on BUG
+
 config TIME_LOW_RES
 	bool
 	default y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 config NO_IOPORT
 	def_bool y
 
@@ -89,6 +90,8 @@ config HZ
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 source "arch/h8300/Kconfig.cpu"
 
 menu "Executable file formats"
@@ -213,6 +216,8 @@ source "drivers/hwmon/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"
diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
index 582797d..b65dcfe 100644
--- a/arch/h8300/Kconfig.cpu
+++ b/arch/h8300/Kconfig.cpu
@@ -1,5 +1,7 @@
 menu "Processor type and features"
 
+source "kernel/time/Kconfig"
+
 choice
 	prompt "H8/300 platform"
 	default H8300H_GENERIC
@@ -11,6 +13,7 @@ config H8300H_GENERIC
 
 config H8300H_AKI3068NET
 	bool "AE-3068/69"
+	select CONFIG_H83068
 	help
 	  AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
 	  More Information. (Japanese Only)
@@ -21,6 +24,7 @@ config H8300H_AKI3068NET
 
 config H8300H_H8MAX
 	bool "H8MAX"
+	select CONFIG_H83068
 	help
 	  H8MAX Evaluation Board Support
 	  More Information. (Japanese Only)
@@ -28,6 +32,7 @@ config H8300H_H8MAX
 
 config H8300H_SIM
 	bool "H8/300H Simulator"
+	select CONFIG_H83007
 	help
 	  GDB Simulator Support
 	  More Information.
@@ -40,6 +45,7 @@ config H8S_GENERIC
 
 config H8S_EDOSK2674
 	bool "EDOSK-2674"
+	select CONFIG_H8S2768
 	help
 	  Renesas EDOSK-2674 Evaluation Board Support
 	  More Information.
@@ -55,44 +61,37 @@ config H8S_SIM
 
 endchoice
 
-if (H8300H_GENERIC || H8S_GENERIC)
-menu "Detail Selection"
-if (H8300H_GENERIC)
 choice
 	prompt "CPU Selection"
 
 config H83002
 	bool "H8/3001,3002,3003"
+	select CPU_H8300H
 
 config H83007
 	bool "H8/3006,3007"
+	select CPU_H8300H
 
 config H83048
 	bool "H8/3044,3045,3046,3047,3048,3052"
+	select CPU_H8300H
 
 config H83068
 	bool "H8/3065,3066,3067,3068,3069"
-endchoice
-endif
-
-if (H8S_GENERIC)
-choice
-	prompt "CPU Selection"
+	select CPU_H8300H
 
 config H8S2678
 	bool "H8S/2670,2673,2674R,2675,2676"
+	select CPU_H8S
+
 endchoice
-endif
 
 config CPU_CLOCK
 	int "CPU Clock Frequency (/1KHz)"
 	default "20000"
 	help
 	  CPU Clock Frequency divide to 1000
-endmenu
-endif
 
-if (H8300H_GENERIC || H8S_GENERIC || H8300H_SIM || H8S_SIM || H8S_EDOSK2674)
 choice
 	prompt "Kernel executes from"
 	---help---
@@ -107,75 +106,61 @@ config ROMKERNEL
 	bool "ROM"
 	help
 	  The kernel will be resident in FLASH/ROM when running.
-
 endchoice
-endif
 
-if (H8300H_AKI3068NET)
-config H83068
-	bool
-	default y
 
-config CPU_CLOCK
-	int
-	default "20000"
-
-config RAMKERNEL
+config CPU_H8300H
 	bool
+	depends on (H83002 || H83007 || H83048 || H83068)
 	default y
-endif
 
-if (H8300H_H8MAX)
-config H83068
+config CPU_H8S
 	bool
+	depends on H8S2678
 	default y
 
-config CPU_CLOCK
-	int
-	default 25000
+choice
+	prompt "Timer"
+config H8300_TIMER8
+	bool "8bit timer (2ch cascade)"
+	depends on (H83007 || H83068 || H8S2678)
 
-config RAMKERNEL
-	bool
-	default y
-endif
+config H8300_TIMER16
+	bool "16bit timer"
+	depends on (H83007 || H83068)
 
-if (H8300H_SIM)
-config H83007
-	bool
-	default y
+config H8300_ITU
+	bool "ITU"
+	depends on (H83002 || H83048)
 
-config CPU_CLOCK
-	int
-	default "16000"
-endif
+config H8300_TPU
+	bool "TPU"
+	depends on H8S2678
+endchoice
 
-if (H8S_EDOSK2674)
-config H8S2678
-	bool
-	default y
-config CPU_CLOCK
-	int
-	default 33000
+if H8300_TIMER8
+choice
+	prompt "Timer Channel"
+config H8300_TIMER8_CH0
+	bool "Channel 0"
+config H8300_TIMER8_CH2
+	bool "Channel 2"
+	depends on CPU_H8300H
+endchoice
 endif
 
-if (H8S_SIM)
-config H8S2678
-	bool
-	default y
-config CPU_CLOCK
-	int
-	default 33000
-endif
+config H8300_TIMER16_CH
+	int "16bit timer channel (0 - 2)"
+	depends on H8300_TIMER16
+	range 0 2
 
-config CPU_H8300H
-	bool
-	depends on (H83002 || H83007 || H83048 || H83068)
-	default y
+config H8300_ITU_CH
+	int "ITU channel"
+	depends on H8300_ITU
 
-config CPU_H8S
-	bool
-	depends on H8S2678
-	default y
+config H8300_TPU_CH
+	int "TPU channel"
+	depends on H8300_TPU
 
 config PREEMPT
 	bool "Preemptible Kernel"
diff --git a/arch/h8300/include/asm/a.out.h b/arch/h8300/include/asm/a.out.h
deleted file mode 100644
index ded780f..0000000
--- a/arch/h8300/include/asm/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __H8300_A_OUT_H__
-#define __H8300_A_OUT_H__
-
-struct exec
-{
-  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
-  unsigned a_text;		/* length of text, in bytes */
-  unsigned a_data;		/* length of data, in bytes */
-  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-  unsigned a_syms;		/* length of symbol table data in file, in bytes */
-  unsigned a_entry;		/* start address */
-  unsigned a_trsize;		/* length of relocation info for text, in bytes */
-  unsigned a_drsize;		/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif /* __H8300_A_OUT_H__ */
diff --git a/arch/h8300/include/asm/bug.h b/arch/h8300/include/asm/bug.h
index edddf5b..887c197 100644
--- a/arch/h8300/include/asm/bug.h
+++ b/arch/h8300/include/asm/bug.h
@@ -1,4 +1,8 @@
 #ifndef _H8300_BUG_H
 #define _H8300_BUG_H
+
+/* always true */
+#define is_valid_bugaddr(addr) (1)
+
 #include <asm-generic/bug.h>
 #endif
diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
index a8b57d1f..94e2284 100644
--- a/arch/h8300/include/asm/elf.h
+++ b/arch/h8300/include/asm/elf.h
@@ -55,7 +55,7 @@ typedef unsigned long elf_fpregset_t;
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
 
 #define R_H8_NONE       0
 #define R_H8_DIR32      1
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
index 26dc6cc..33e842f 100644
--- a/arch/h8300/include/asm/io.h
+++ b/arch/h8300/include/asm/io.h
@@ -295,6 +295,40 @@ static __inline__ void ctrl_outl(unsigned long b, unsigned long addr)
         *(volatile unsigned long*)addr = b;
 }
 
+static __inline__ void ctrl_bclr(int b, unsigned long addr)
+{
+	if (__builtin_constant_p(b))
+		switch (b) {
+		case 0: __asm__("bclr #0,@%0"::"r"(addr)); break;
+		case 1: __asm__("bclr #1,@%0"::"r"(addr)); break;
+		case 2: __asm__("bclr #2,@%0"::"r"(addr)); break;
+		case 3: __asm__("bclr #3,@%0"::"r"(addr)); break;
+		case 4: __asm__("bclr #4,@%0"::"r"(addr)); break;
+		case 5: __asm__("bclr #5,@%0"::"r"(addr)); break;
+		case 6: __asm__("bclr #6,@%0"::"r"(addr)); break;
+		case 7: __asm__("bclr #7,@%0"::"r"(addr)); break;
+		}
+	else
+		__asm__("bclr %w0,@%1"::"r"(b), "r"(addr));
+}
+
+static __inline__ void ctrl_bset(int b, unsigned long addr)
+{
+	if (__builtin_constant_p(b))
+		switch (b) {
+		case 0: __asm__("bset #0,@%0"::"r"(addr)); break;
+		case 1: __asm__("bset #1,@%0"::"r"(addr)); break;
+		case 2: __asm__("bset #2,@%0"::"r"(addr)); break;
+		case 3: __asm__("bset #3,@%0"::"r"(addr)); break;
+		case 4: __asm__("bset #4,@%0"::"r"(addr)); break;
+		case 5: __asm__("bset #5,@%0"::"r"(addr)); break;
+		case 6: __asm__("bset #6,@%0"::"r"(addr)); break;
+		case 7: __asm__("bset #7,@%0"::"r"(addr)); break;
+		}
+	else
+		__asm__("bset %w0,@%1"::"r"(b), "r"(addr));
+}
+
 /* Pages to physical address... */
 #define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
 #define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
diff --git a/arch/h8300/include/asm/md.h b/arch/h8300/include/asm/md.h
index 1a47dc6..1b7300e 100644
--- a/arch/h8300/include/asm/md.h
+++ b/arch/h8300/include/asm/md.h
@@ -1,4 +1,4 @@
-/* $Id: md.h,v 1.1 2002/11/19 02:09:26 gerg Exp $
+/*
  * md.h: High speed xor_block operation for RAID4/5 
  *
  */
diff --git a/arch/h8300/include/asm/system.h b/arch/h8300/include/asm/system.h
index 4b8e475..d98d976 100644
--- a/arch/h8300/include/asm/system.h
+++ b/arch/h8300/include/asm/system.h
@@ -155,4 +155,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 
 #define arch_align_stack(x) (x)
 
+void die(char *str, struct pt_regs *fp, unsigned long err);
+
 #endif /* _H8300_SYSTEM_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index aafd4d3..700014d 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -89,6 +89,7 @@ static inline struct thread_info *current_thread_info(void)
 					   TIF_NEED_RESCHED */
 #define TIF_MEMDIE		4
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+#define TIF_FREEZE		16	/* is freezing for suspend */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -96,6 +97,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 
diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile
index 6c248c3..8d4d2a5 100644
--- a/arch/h8300/kernel/Makefile
+++ b/arch/h8300/kernel/Makefile
@@ -7,6 +7,6 @@ extra-y := vmlinux.lds
 obj-y := process.o traps.o ptrace.o irq.o \
 	 sys_h8300.o time.o signal.o \
          setup.o gpio.o init_task.o syscalls.o \
-	 entry.o
+	 entry.o timer/
 
 obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o 
diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c
index 4fd7138..cfc9127 100644
--- a/arch/h8300/kernel/module.c
+++ b/arch/h8300/kernel/module.c
@@ -114,9 +114,10 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 void module_arch_cleanup(struct module *mod)
 {
+	module_bug_cleanup(mod);
 }
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index dfbe7ab..a8ef654 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -34,7 +34,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
 #include <linux/fs.h>
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
index e37c835..7f2d6cf 100644
--- a/arch/h8300/kernel/time.c
+++ b/arch/h8300/kernel/time.c
@@ -27,27 +27,21 @@
 #include <linux/profile.h>
 
 #include <asm/io.h>
-#include <asm/target_time.h>
+#include <asm/timer.h>
 
 #define	TICK_SIZE (tick_nsec / 1000)
 
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static void timer_interrupt(int irq, void *dummy, struct pt_regs * regs)
+void h8300_timer_tick(void)
 {
-	/* may need to kick the hardware timer */
-	platform_timer_eoi();
-
+	if (current->pid)
+		profile_tick(CPU_PROFILING);
+	write_seqlock(&xtime_lock);
 	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	profile_tick(CPU_PROFILING);
+	write_sequnlock(&xtime_lock);
+	update_process_times(user_mode(get_irq_regs()));
 }
 
-void time_init(void)
+void __init time_init(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
@@ -57,12 +51,13 @@ void time_init(void)
 	year = 1980;
 	mon = day = 1;
 	hour = min = sec = 0;
-	platform_gettod (&year, &mon, &day, &hour, &min, &sec);
-
+#ifdef CONFIG_H8300_GETTOD
+	h8300_gettod (&year, &mon, &day, &hour, &min, &sec);
+#endif
 	if ((year += 1900) < 1970)
 		year += 100;
 	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
 	xtime.tv_nsec = 0;
 
-	platform_timer_setup(timer_interrupt);
+	h8300_timer_setup();
 }
diff --git a/arch/h8300/kernel/timer/Makefile b/arch/h8300/kernel/timer/Makefile
new file mode 100644
index 0000000..bef0510
--- /dev/null
+++ b/arch/h8300/kernel/timer/Makefile
@@ -0,0 +1,6 @@
+# h8300 internal timer handler
+
+obj-$(CONFIG_H8300_TIMER8)  := timer8.o
+obj-$(CONFIG_H8300_TIMER16) := timer16.o
+obj-$(CONFIG_H8300_ITU)     := itu.o
+obj-$(CONFIG_H8300_TPU)     := tpu.o
diff --git a/arch/h8300/kernel/timer/itu.c b/arch/h8300/kernel/timer/itu.c
new file mode 100644
index 0000000..d1c9265
--- /dev/null
+++ b/arch/h8300/kernel/timer/itu.c
@@ -0,0 +1,83 @@
+/*
+ *  linux/arch/h8300/kernel/timer/itu.c
+ *
+ *  Yoshinori Sato <ysato@users.sourcefoge.jp>
+ *
+ *  ITU Timer Handler
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/regs306x.h>
+
+#if CONFIG_H8300_ITU_CH == 0
+#define ITUBASE	0xffff64
+#define ITUIRQ	24
+#elif CONFIG_H8300_ITU_CH == 1
+#define ITUBASE	0xffff6e
+#define ITUIRQ	28
+#elif CONFIG_H8300_ITU_CH == 2
+#define ITUBASE	0xffff78
+#define ITUIRQ	32
+#elif CONFIG_H8300_ITU_CH == 3
+#define ITUBASE	0xffff82
+#define ITUIRQ	36
+#elif CONFIG_H8300_ITU_CH == 4
+#define ITUBASE	0xffff92
+#define ITUIRQ	40
+#else
+#error Unknown timer channel.
+#endif
+
+#define TCR	0
+#define TIOR	1
+#define TIER	2
+#define TSR	3
+#define TCNT	4
+#define GRA	6
+#define GRB	8
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	h8300_timer_tick();
+	ctrl_bclr(IMFA, ITUBASE + TSR);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction itu_irq = {
+	.name		= "itu",
+	.handler	= timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.mask		= CPU_MASK_NONE,
+};
+
+static const int __initdata divide_rate[] = {1, 2, 4, 8};
+
+void __init h8300_timer_setup(void)
+{
+	unsigned int div;
+	unsigned int cnt;
+
+	calc_param(cnt, div, divide_rate, 0x10000);
+
+	setup_irq(ITUIRQ, &itu_irq);
+
+	/* initalize timer */
+	ctrl_outb(0, TSTR);
+	ctrl_outb(CCLR0 | div, ITUBASE + TCR);
+	ctrl_outb(0x01, ITUBASE + TIER);
+	ctrl_outw(cnt, ITUBASE + GRA);
+	ctrl_bset(CONFIG_H8300_ITU_CH, TSTR);
+}
diff --git a/arch/h8300/kernel/timer/timer16.c b/arch/h8300/kernel/timer/timer16.c
new file mode 100644
index 0000000..e14271b
--- /dev/null
+++ b/arch/h8300/kernel/timer/timer16.c
@@ -0,0 +1,78 @@
+/*
+ *  linux/arch/h8300/kernel/timer/timer16.c
+ *
+ *  Yoshinori Sato <ysato@users.sourcefoge.jp>
+ *
+ *  16bit Timer Handler
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/regs306x.h>
+
+/* 16bit timer */
+#if CONFIG_H8300_TIMER16_CH == 0
+#define _16BASE	0xffff78
+#define _16IRQ	24
+#elif CONFIG_H8300_TIMER16_CH == 1
+#define _16BASE	0xffff80
+#define _16IRQ	28
+#elif CONFIG_H8300_TIMER16_CH == 2
+#define _16BASE	0xffff88
+#define _16IRQ	32
+#else
+#error Unknown timer channel.
+#endif
+
+#define TCR	0
+#define TIOR	1
+#define TCNT	2
+#define GRA	4
+#define GRB	6
+
+#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*10000 /* Timer input freq. */
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	h8300_timer_tick();
+	ctrl_bclr(CONFIG_H8300_TIMER16_CH, TISRA);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction timer16_irq = {
+	.name		= "timer-16",
+	.handler	= timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.mask		= CPU_MASK_NONE,
+};
+
+static const int __initdata divide_rate[] = {1, 2, 4, 8};
+
+void __init h8300_timer_setup(void)
+{
+	unsigned int div;
+	unsigned int cnt;
+
+	calc_param(cnt, div, divide_rate, 0x10000);
+
+	setup_irq(_16IRQ, &timer16_irq);
+
+	/* initalize timer */
+	ctrl_outb(0, TSTR);
+	ctrl_outb(CCLR0 | div, _16BASE + TCR);
+	ctrl_outw(cnt, _16BASE + GRA);
+	ctrl_bset(4 + CONFIG_H8300_TIMER16_CH, TISRA);
+	ctrl_bset(CONFIG_H8300_TIMER16_CH, TSTR);
+}
diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c
new file mode 100644
index 0000000..0556d7c
--- /dev/null
+++ b/arch/h8300/kernel/timer/timer8.c
@@ -0,0 +1,103 @@
+/*
+ *  linux/arch/h8300/kernel/cpu/timer/timer8.c
+ *
+ *  Yoshinori Sato <ysato@users.sourcefoge.jp>
+ *
+ *  8bit Timer Handler
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/timer.h>
+#if defined(CONFIG_CPU_H8300H)
+#include <asm/regs306x.h>
+#endif
+#if defined(CONFIG_CPU_H8S)
+#include <asm/regs267x.h>
+#endif
+
+/* 8bit timer x2 */
+#define CMFA	6
+
+#if defined(CONFIG_H8300_TIMER8_CH0)
+#define _8BASE	_8TCR0
+#ifdef CONFIG_CPU_H8300H
+#define _8IRQ	36
+#endif
+#ifdef CONFIG_CPU_H8S
+#define _8IRQ	72
+#endif
+#elif defined(CONFIG_H8300_TIMER8_CH2)
+#ifdef CONFIG_CPU_H8300H
+#define _8BASE	_8TCR2
+#define _8IRQ	40
+#endif
+#endif
+
+#ifndef _8BASE
+#error Unknown timer channel.
+#endif
+
+#define _8TCR	0
+#define _8TCSR	2
+#define TCORA	4
+#define TCORB	6
+#define _8TCNT	8
+
+#define CMIEA	0x40
+#define CCLR_CMA 0x08
+#define CKS2	0x04
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	h8300_timer_tick();
+	ctrl_bclr(CMFA, _8BASE + _8TCSR);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction timer8_irq = {
+	.name		= "timer-8",
+	.handler	= timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.mask		= CPU_MASK_NONE,
+};
+
+static const int __initdata divide_rate[] = {8, 64, 8192};
+
+void __init h8300_timer_setup(void)
+{
+	unsigned int div;
+	unsigned int cnt;
+
+	calc_param(cnt, div, divide_rate, 0x10000);
+	div++;
+
+	setup_irq(_8IRQ, &timer8_irq);
+
+#if defined(CONFIG_CPU_H8S)
+	/* Timer module enable */
+	ctrl_bclr(0, MSTPCRL)
+#endif
+
+	/* initalize timer */
+	ctrl_outw(cnt, _8BASE + TCORA);
+	ctrl_outw(0x0000, _8BASE + _8TCSR);
+	ctrl_outw((CMIEA|CCLR_CMA|CKS2) << 8 | div,
+		  _8BASE + _8TCR);
+}
diff --git a/arch/h8300/kernel/timer/tpu.c b/arch/h8300/kernel/timer/tpu.c
new file mode 100644
index 0000000..df7f453
--- /dev/null
+++ b/arch/h8300/kernel/timer/tpu.c
@@ -0,0 +1,102 @@
+/*
+ *  linux/arch/h8300/kernel/timer/tpu.c
+ *
+ *  Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ *  TPU Timer Handler
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/regs267x.h>
+
+/* TPU */
+#if CONFIG_H8300_TPU_CH == 0
+#define TPUBASE	0xffffd0
+#define TPUIRQ	40
+#elif CONFIG_H8300_TPU_CH == 1
+#define TPUBASE	0xffffe0
+#define TPUIRQ	48
+#elif CONFIG_H8300_TPU_CH == 2
+#define TPUBASE	0xfffff0
+#define TPUIRQ	52
+#elif CONFIG_H8300_TPU_CH == 3
+#define TPUBASE	0xfffe80
+#define TPUIRQ	56
+#elif CONFIG_H8300_TPU_CH == 4
+#define TPUBASE	0xfffe90
+#define TPUIRQ	64
+#else
+#error Unknown timer channel.
+#endif
+
+#define _TCR	0
+#define _TMDR	1
+#define _TIOR	2
+#define _TIER	4
+#define _TSR	5
+#define _TCNT	6
+#define _GRA	8
+#define _GRB	10
+
+#define CCLR0	0x20
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	h8300_timer_tick();
+	ctrl_bclr(0, TPUBASE + _TSR);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction tpu_irq = {
+	.name		= "tpu",
+	.handler	= timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.mask		= CPU_MASK_NONE,
+};
+
+const static int __initdata divide_rate[] = {
+#if CONFIG_H8300_TPU_CH == 0
+	1,4,16,64,0,0,0,0,
+#elif (CONFIG_H8300_TPU_CH == 1) || (CONFIG_H8300_TPU_CH == 5)
+	1,4,16,64,0,0,256,0,
+#elif (CONFIG_H8300_TPU_CH == 2) || (CONFIG_H8300_TPU_CH == 4)
+	1,4,16,64,0,0,0,1024,
+#elif CONFIG_H8300_TPU_CH == 3
+	1,4,16,64,0,1024,256,4096,
+#endif
+};
+
+void __init h8300_timer_setup(void)
+{
+	unsigned int cnt;
+	unsigned int div;
+
+	calc_param(cnt, div, divide_rate, 0x10000);
+
+	setup_irq(TPUIRQ, &tpu_irq);
+
+	/* TPU module enabled */
+	ctrl_bclr(3, MSTPCRH);
+
+	ctrl_outb(0, TSTR);
+	ctrl_outb(CCLR0 | div, TPUBASE + _TCR);
+	ctrl_outb(0, TPUBASE + _TMDR);
+	ctrl_outw(0, TPUBASE + _TIOR);
+	ctrl_outb(0x01, TPUBASE + _TIER);
+	ctrl_outw(cnt, TPUBASE + _GRA);
+	ctrl_bset(CONFIG_H8300_TPU_CH, TSTR);
+}
diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c
index f8f7d7ea..3c0b66b 100644
--- a/arch/h8300/kernel/traps.c
+++ b/arch/h8300/kernel/traps.c
@@ -20,12 +20,14 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/bug.h>
 
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/traps.h>
 #include <asm/page.h>
-#include <asm/gpio.h>
+
+static DEFINE_SPINLOCK(die_lock);
 
 /*
  * this must be called very early as the kernel might
@@ -94,16 +96,19 @@ static void dump(struct pt_regs *fp)
 	printk("\n\n");
 }
 
-void die_if_kernel (char *str, struct pt_regs *fp, int nr)
+void die(char *str, struct pt_regs *fp, unsigned long err)
 {
-	extern int console_loglevel;
+	static int diecount;
 
-	if (!(fp->ccr & PS_S))
-		return;
+	oops_enter();
 
-	console_loglevel = 15;
+	console_verbose();
+	spin_lock_irq(&die_lock);
+	report_bug(fp->pc, fp);
+	printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++diecount);
 	dump(fp);
 
+	spin_unlock_irq(&die_lock);
 	do_exit(SIGSEGV);
 }
 
diff --git a/arch/h8300/mm/fault.c b/arch/h8300/mm/fault.c
index 29e9af9..1d092ab 100644
--- a/arch/h8300/mm/fault.c
+++ b/arch/h8300/mm/fault.c
@@ -20,8 +20,6 @@
 #include <asm/system.h>
 #include <asm/pgtable.h>
 
-extern void die_if_kernel(char *, struct pt_regs *, long);
-
 /*
  * This routine handles page faults.  It determines the problem, and
  * then passes it off to one of the appropriate routines.
@@ -50,7 +48,8 @@ asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
 	} else
 		printk(KERN_ALERT "Unable to handle kernel access");
 	printk(" at virtual address %08lx\n",address);
-	die_if_kernel("Oops", regs, error_code);
+	if (!user_mode(regs))
+		die("Oops", regs, error_code);
 	do_exit(SIGKILL);
 
 	return 1;
diff --git a/arch/h8300/platform/h8300h/aki3068net/Makefile b/arch/h8300/platform/h8300h/aki3068net/Makefile
index b03c328..b7ff780 100644
--- a/arch/h8300/platform/h8300h/aki3068net/Makefile
+++ b/arch/h8300/platform/h8300h/aki3068net/Makefile
@@ -3,4 +3,3 @@
 #
 
 extra-y := crt0_ram.o
-obj-y := timer.o
diff --git a/arch/h8300/platform/h8300h/aki3068net/timer.c b/arch/h8300/platform/h8300h/aki3068net/timer.c
deleted file mode 100644
index 27cd85d..0000000
--- a/arch/h8300/platform/h8300h/aki3068net/timer.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8300h/aki3068net/timer.c
- *
- *  Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- *  Platform depend Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs306x.h>
-
-#define CMFA 6
-
-#define CMIEA 0x40
-#define CCLR_CMA 0x08
-#define CLK_DIV8192 0x03
-
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */
-
-void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *))
-{
-	/* setup 8bit timer ch2 */
-	ctrl_outb(H8300_TIMER_FREQ / HZ, TCORA2);      /* set interval */
-	ctrl_outb(0x00, _8TCSR2);                      /* no output */
-	request_irq(40, timer_int, 0, "timer", 0);
-	ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR2); /* start count */
-}
-
-void platform_timer_eoi(void)
-{
-	*(volatile unsigned char *)_8TCSR2 &= ~(1 << CMFA);
-}
-
-void platform_gettod(int *year, int *mon, int *day, int *hour,
-		 int *min, int *sec)
-{
-	*year = *mon = *day = *hour = *min = *sec = 0;
-}
diff --git a/arch/h8300/platform/h8300h/generic/Makefile b/arch/h8300/platform/h8300h/generic/Makefile
index 32b964a..2b12a17 100644
--- a/arch/h8300/platform/h8300h/generic/Makefile
+++ b/arch/h8300/platform/h8300h/generic/Makefile
@@ -3,4 +3,3 @@
 #
 
 extra-y :=  crt0_$(MODEL).o
-obj-y := timer.o
diff --git a/arch/h8300/platform/h8300h/generic/timer.c b/arch/h8300/platform/h8300h/generic/timer.c
deleted file mode 100644
index 6f5cefe0..0000000
--- a/arch/h8300/platform/h8300h/generic/timer.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8300h/generic/timer.c
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <linux/timex.h>
-
-#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
-#include <asm/regs306x.h>
-#define CMFA 6
-
-#define CMIEA 0x40
-#define CCLR_CMA 0x08
-#define CLK_DIV8192 0x03
-
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */
-
-void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *))
-{
-	/* setup 8bit timer ch2 */
-	ctrl_outb(H8300_TIMER_FREQ / HZ, TCORA2);      /* set interval */
-	ctrl_outb(0x00, _8TCSR2);                      /* no output */
-	request_irq(40, timer_int, 0, "timer", 0);
-	ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR2); /* start count */
-}
-
-void platform_timer_eoi(void)
-{
-	*(volatile unsigned char *)_8TCSR2 &= ~(1 << CMFA);
-}
-#endif
-
-#if defined(CONFIG_H83002) || defined(CONFIG_H83048)
-/* FIXME! */
-#define TSTR 0x00ffff60
-#define TSNC 0x00ffff61
-#define TMDR 0x00ffff62
-#define TFCR 0x00ffff63
-#define TOER 0x00ffff90
-#define TOCR 0x00ffff91
-/* ITU0 */
-#define TCR  0x00ffff64
-#define TIOR 0x00ffff65
-#define TIER 0x00ffff66
-#define TSR  0x00ffff67
-#define TCNT 0x00ffff68
-#define GRA  0x00ffff6a
-#define GRB  0x00ffff6c
-
-#define CCLR_CMGRA 0x20
-#define CLK_DIV8 0x03
-
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8 /* Timer input freq. */
-
-void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *))
-{
-	*(unsigned short *)GRA= H8300_TIMER_FREQ / HZ;  /* set interval */
-	*(unsigned short *)TCNT=0;                      /* clear counter */
-	ctrl_outb(0x80|CCLR_CMGRA|CLK_DIV8, TCR);       /* set ITU0 clock */
-	ctrl_outb(0x88, TIOR);                          /* no output */
-	request_irq(26, timer_int, 0, "timer", 0);
-	ctrl_outb(0xf9, TIER);                          /* compare match GRA interrupt */
-	ctrl_outb(ctrl_inb(TSNC) & ~0x01, TSNC);        /* ITU0 async */
-	ctrl_outb(ctrl_inb(TMDR) & ~0x01, TMDR);        /* ITU0 normal mode */
-	ctrl_outb(ctrl_inb(TSTR) | 0x01, TSTR);         /* ITU0 Start */
-	return 0;
-}
-
-void platform_timer_eoi(void)
-{
-	ctrl_outb(ctrl_inb(TSR) & ~0x01,TSR);
-}
-#endif
-
-void platform_gettod(int *year, int *mon, int *day, int *hour,
-		 int *min, int *sec)
-{
-	*year = *mon = *day = *hour = *min = *sec = 0;
-}
diff --git a/arch/h8300/platform/h8300h/h8max/Makefile b/arch/h8300/platform/h8300h/h8max/Makefile
index b03c328..b7ff780 100644
--- a/arch/h8300/platform/h8300h/h8max/Makefile
+++ b/arch/h8300/platform/h8300h/h8max/Makefile
@@ -3,4 +3,3 @@
 #
 
 extra-y := crt0_ram.o
-obj-y := timer.o
diff --git a/arch/h8300/platform/h8300h/h8max/timer.c b/arch/h8300/platform/h8300h/h8max/timer.c
deleted file mode 100644
index 85a574a..0000000
--- a/arch/h8300/platform/h8300h/h8max/timer.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8300h/h8max/timer.c
- *
- *  Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- *  Platform depend Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs306x.h>
-
-#define CMFA 6
-
-#define CMIEA 0x40
-#define CCLR_CMA 0x08
-#define CLK_DIV8192 0x03
-
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */
-
-void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *))
-{
-	/* setup 8bit timer ch2 */
-	ctrl_outb(H8300_TIMER_FREQ / HZ, TCORA2);      /* set interval */
-	ctrl_outb(0x00, _8TCSR2);                      /* no output */
-	request_irq(40, timer_int, 0, "timer", 0);
-	ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR2); /* start count */
-}
-
-void platform_timer_eoi(void)
-{
-	*(volatile unsigned char *)_8TCSR2 &= ~(1 << CMFA);
-}
-
-void platform_gettod(int *year, int *mon, int *day, int *hour,
-		 int *min, int *sec)
-{
-	*year = *mon = *day = *hour = *min = *sec = 0;
-}
-
diff --git a/arch/h8300/platform/h8s/edosk2674/Makefile b/arch/h8300/platform/h8s/edosk2674/Makefile
index f763654..8e34972 100644
--- a/arch/h8300/platform/h8s/edosk2674/Makefile
+++ b/arch/h8300/platform/h8s/edosk2674/Makefile
@@ -3,4 +3,3 @@
 #
 
 extra-y := crt0_$(MODEL).o
-obj-y := timer.o
diff --git a/arch/h8300/platform/h8s/edosk2674/timer.c b/arch/h8300/platform/h8s/edosk2674/timer.c
deleted file mode 100644
index bfb1424..0000000
--- a/arch/h8300/platform/h8s/edosk2674/timer.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8s/edosk2674/timer.c
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs267x.h>
-
-#define CMFA 6
-
-#define CMIEA 0x40
-#define CCLR_CMA 0x08
-#define CLK_DIV8192 0x03
-
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */
-
-void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *))
-{
-	/* 8bit timer module enabled */
-	ctrl_outb(ctrl_inb(MSTPCRL) & ~0x01, MSTPCRL);
-	/* setup 8bit timer ch1 */
-	ctrl_outb(H8300_TIMER_FREQ / HZ, _8TCORA1);      /* set interval */
-	ctrl_outb(0x00, _8TCSR1);                        /* no output */
-	request_irq(76, timer_int, 0, "timer" ,0);
-	ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR1);   /* start count */
-}
-
-void platform_timer_eoi(void)
-{
-	*(volatile unsigned char *)_8TCSR1 &= ~(1 << CMFA);
-}
-
-void platform_gettod(int *year, int *mon, int *day, int *hour,
-		 int *min, int *sec)
-{
-/* FIXME! not RTC support */
-	*year = *mon = *day = *hour = *min = *sec = 0;
-}
diff --git a/arch/h8300/platform/h8s/generic/Makefile b/arch/h8300/platform/h8s/generic/Makefile
index 055d53a..44b4685 100644
--- a/arch/h8300/platform/h8s/generic/Makefile
+++ b/arch/h8300/platform/h8s/generic/Makefile
@@ -3,4 +3,3 @@
 #
 
 extra-y =  crt0_$(MODEL).o
-obj-y := timer.o
diff --git a/arch/h8300/platform/h8s/generic/timer.c b/arch/h8300/platform/h8s/generic/timer.c
deleted file mode 100644
index c2211c6..0000000
--- a/arch/h8300/platform/h8s/generic/timer.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/arch/h8300/platform/h8s/generic/timer.c
- *
- *  Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- *  Platform depend Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs267x.h>
-
-#define CMFA 6
-
-#define CMIEA 0x40
-#define CCLR_CMA 0x08
-#define CLK_DIV8192 0x03
-
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */
-
-void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *))
-{
-	/* 8bit timer module enabled */
-	ctrl_outb(ctrl_inb(MSTPCRL) & ~0x01, MSTPCRL);
-	/* setup 8bit timer ch1 */
-	ctrl_outb(H8300_TIMER_FREQ / HZ, _8TCORA1);      /* set interval */
-	ctrl_outb(0x00, _8TCSR1);                        /* no output */
-	request_irq(76, timer_int, 0, "timer" ,0);
-	ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR1);   /* start count */
-}
-
-void platform_timer_eoi(void)
-{
-	*(volatile unsigned char *)_8TCSR1 &= ~(1 << CMFA);
-}
-
-void platform_gettod(int *year, int *mon, int *day, int *hour,
-		 int *min, int *sec)
-{
-	*year = *mon = *day = *hour = *min = *sec = 0;
-}
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 48e496f..27eec714 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -7,6 +7,8 @@ mainmenu "IA-64 Linux Kernel Configuration"
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "Processor type and features"
 
 config IA64
@@ -21,6 +23,7 @@ config IA64
 	select HAVE_KRETPROBES
 	select HAVE_DMA_ATTRS
 	select HAVE_KVM
+	select HAVE_ARCH_TRACEHOOK
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
@@ -60,14 +63,6 @@ config RWSEM_XCHGADD_ALGORITHM
 	bool
 	default y
 
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
 config HUGETLB_PAGE_SIZE_VARIABLE
 	bool
 	depends on HUGETLB_PAGE
@@ -116,6 +111,33 @@ config AUDIT_ARCH
 	bool
 	default y
 
+menuconfig PARAVIRT_GUEST
+	bool "Paravirtualized guest support"
+	help
+	  Say Y here to get to see options related to running Linux under
+	  various hypervisors.  This option alone does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
+
+if PARAVIRT_GUEST
+
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	depends on PARAVIRT_GUEST
+	default y
+	bool
+	default y
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.  However, when run without a hypervisor
+	  the kernel is theoretically slower and slightly larger.
+
+
+source "arch/ia64/xen/Kconfig"
+
+endif
+
 choice
 	prompt "System type"
 	default IA64_GENERIC
@@ -125,6 +147,7 @@ config IA64_GENERIC
 	select NUMA
 	select ACPI_NUMA
 	select SWIOTLB
+	select PCI_MSI
 	help
 	  This selects the system type of your hardware.  A "generic" kernel
 	  will run on any supported IA-64 system.  However, if you configure
@@ -132,11 +155,13 @@ config IA64_GENERIC
 
 	  generic		For any supported IA-64 system
 	  DIG-compliant		For DIG ("Developer's Interface Guide") compliant systems
+	  DIG+Intel+IOMMU	For DIG systems with Intel IOMMU
 	  HP-zx1/sx1000		For HP systems
 	  HP-zx1/sx1000+swiotlb	For HP systems with (broken) DMA-constrained devices.
 	  SGI-SN2		For SGI Altix systems
 	  SGI-UV		For SGI UV systems
 	  Ski-simulator		For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
+	  Xen-domU		For xen domU system
 
 	  If you don't know what to do, choose "generic".
 
@@ -144,6 +169,11 @@ config IA64_DIG
 	bool "DIG-compliant"
 	select SWIOTLB
 
+config IA64_DIG_VTD
+	bool "DIG+Intel+IOMMU"
+	select DMAR
+	select PCI_MSI
+
 config IA64_HP_ZX1
 	bool "HP-zx1/sx1000"
 	help
@@ -187,6 +217,10 @@ config IA64_HP_SIM
 	bool "Ski-simulator"
 	select SWIOTLB
 
+config IA64_XEN_GUEST
+	bool "Xen guest"
+	depends on XEN
+
 endchoice
 
 choice
@@ -589,6 +623,16 @@ source "drivers/pci/hotplug/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
+config DMAR
+        bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
+        depends on IA64_GENERIC && ACPI && EXPERIMENTAL
+	help
+	  DMA remapping (DMAR) devices support enables independent address
+	  translations for Direct Memory Access (DMA) from devices.
+	  These DMA remapping devices are reported via ACPI tables
+	  and include PCI device scope covered by these DMA
+	  remapping devices.
+
 endmenu
 
 endif
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 905d25b..58a7e46a 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -53,12 +53,15 @@ libs-y				+= arch/ia64/lib/
 core-y				+= arch/ia64/kernel/ arch/ia64/mm/
 core-$(CONFIG_IA32_SUPPORT)	+= arch/ia64/ia32/
 core-$(CONFIG_IA64_DIG) 	+= arch/ia64/dig/
+core-$(CONFIG_IA64_DIG_VTD) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_GENERIC) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
+core-$(CONFIG_IA64_XEN_GUEST)	+= arch/ia64/dig/
 core-$(CONFIG_IA64_SGI_SN2)	+= arch/ia64/sn/
 core-$(CONFIG_IA64_SGI_UV)	+= arch/ia64/uv/
 core-$(CONFIG_KVM) 		+= arch/ia64/kvm/
+core-$(CONFIG_XEN)		+= arch/ia64/xen/
 
 drivers-$(CONFIG_PCI)		+= arch/ia64/pci/
 drivers-$(CONFIG_IA64_HP_SIM)	+= arch/ia64/hp/sim/
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 9f48397..e05f9e1 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -233,6 +233,8 @@ CONFIG_DMIID=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
+# CONFIG_DMAR is not set
+
 #
 # Power management and ACPI
 #
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 797acf9..c522edf 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -172,6 +172,8 @@ CONFIG_DMIID=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
+# CONFIG_DMAR is not set
+
 #
 # Power management and ACPI
 #
diff --git a/arch/ia64/dig/Makefile b/arch/ia64/dig/Makefile
index 971cd78..5c02838 100644
--- a/arch/ia64/dig/Makefile
+++ b/arch/ia64/dig/Makefile
@@ -6,4 +6,9 @@
 #
 
 obj-y := setup.o
+ifeq ($(CONFIG_DMAR), y)
+obj-$(CONFIG_IA64_GENERIC) += machvec.o machvec_vtd.o dig_vtd_iommu.o
+else
 obj-$(CONFIG_IA64_GENERIC) += machvec.o
+endif
+obj-$(CONFIG_IA64_DIG_VTD) += dig_vtd_iommu.o
diff --git a/arch/ia64/dig/dig_vtd_iommu.c b/arch/ia64/dig/dig_vtd_iommu.c
new file mode 100644
index 0000000..1c8a079
--- /dev/null
+++ b/arch/ia64/dig/dig_vtd_iommu.c
@@ -0,0 +1,59 @@
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/intel-iommu.h>
+
+void *
+vtd_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		 gfp_t flags)
+{
+	return intel_alloc_coherent(dev, size, dma_handle, flags);
+}
+EXPORT_SYMBOL_GPL(vtd_alloc_coherent);
+
+void
+vtd_free_coherent(struct device *dev, size_t size, void *vaddr,
+		 dma_addr_t dma_handle)
+{
+	intel_free_coherent(dev, size, vaddr, dma_handle);
+}
+EXPORT_SYMBOL_GPL(vtd_free_coherent);
+
+dma_addr_t
+vtd_map_single_attrs(struct device *dev, void *addr, size_t size,
+		     int dir, struct dma_attrs *attrs)
+{
+	return intel_map_single(dev, (phys_addr_t)addr, size, dir);
+}
+EXPORT_SYMBOL_GPL(vtd_map_single_attrs);
+
+void
+vtd_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size,
+		       int dir, struct dma_attrs *attrs)
+{
+	intel_unmap_single(dev, iova, size, dir);
+}
+EXPORT_SYMBOL_GPL(vtd_unmap_single_attrs);
+
+int
+vtd_map_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents,
+		 int dir, struct dma_attrs *attrs)
+{
+	return intel_map_sg(dev, sglist, nents, dir);
+}
+EXPORT_SYMBOL_GPL(vtd_map_sg_attrs);
+
+void
+vtd_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
+		   int nents, int dir, struct dma_attrs *attrs)
+{
+	intel_unmap_sg(dev, sglist, nents, dir);
+}
+EXPORT_SYMBOL_GPL(vtd_unmap_sg_attrs);
+
+int
+vtd_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vtd_dma_mapping_error);
diff --git a/arch/ia64/dig/machvec_vtd.c b/arch/ia64/dig/machvec_vtd.c
new file mode 100644
index 0000000..7cd3eb4
--- /dev/null
+++ b/arch/ia64/dig/machvec_vtd.c
@@ -0,0 +1,3 @@
+#define MACHVEC_PLATFORM_NAME		dig_vtd
+#define MACHVEC_PLATFORM_HEADER		<asm/machvec_dig_vtd.h>
+#include <asm/machvec_init.h>
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 4956be4..d98f0f4 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2070,14 +2070,13 @@ sba_init(void)
 	if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb"))
 		return 0;
 
-#if defined(CONFIG_IA64_GENERIC) && defined(CONFIG_CRASH_DUMP) && \
-        defined(CONFIG_PROC_FS)
+#if defined(CONFIG_IA64_GENERIC)
 	/* If we are booting a kdump kernel, the sba_iommu will
 	 * cause devices that were not shutdown properly to MCA
 	 * as soon as they are turned back on.  Our only option for
 	 * a successful kdump kernel boot is to use the swiotlb.
 	 */
-	if (elfcorehdr_addr < ELFCORE_ADDR_MAX) {
+	if (is_kdump_kernel()) {
 		if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0)
 			panic("Unable to initialize software I/O TLB:"
 				  " Try machvec=dig boot option");
diff --git a/arch/ia64/ia32/audit.c b/arch/ia64/ia32/audit.c
index 5e901c7..5c93ddd 100644
--- a/arch/ia64/ia32/audit.c
+++ b/arch/ia64/ia32/audit.c
@@ -1,4 +1,4 @@
-#include <asm-x86/unistd_32.h>
+#include "../../x86/include/asm/unistd_32.h"
 
 unsigned ia32_dir_class[] = {
 #include <asm-generic/audit_dir_write.h>
diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c
index 4f0c30c..f92bdaa 100644
--- a/arch/ia64/ia32/binfmt_elf32.c
+++ b/arch/ia64/ia32/binfmt_elf32.c
@@ -41,7 +41,7 @@ randomize_stack_top(unsigned long stack_top);
 #define elf_map				elf32_map
 
 #undef SET_PERSONALITY
-#define SET_PERSONALITY(ex, ibcs2)	elf32_set_personality()
+#define SET_PERSONALITY(ex)	elf32_set_personality()
 
 #define elf_read_implies_exec(ex, have_pt_gnu_stack)	(!(have_pt_gnu_stack))
 
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index ff88c48..a8cf199 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -108,6 +108,11 @@ GLOBAL_ENTRY(ia32_trace_syscall)
 	;;
 	st8 [r2]=r3				// initialize return code to -ENOSYS
 	br.call.sptk.few rp=syscall_trace_enter	// give parent a chance to catch syscall args
+	cmp.lt p6,p0=r8,r0			// check tracehook
+	adds r2=IA64_PT_REGS_R8_OFFSET+16,sp	// r2 = &pt_regs.r8
+	;;
+(p6)	st8.spill [r2]=r8			// store return value in slot for r8
+(p6)	br.spnt.few .ret4
 .ret2:	// Need to reload arguments (they may be changed by the tracing process)
 	adds r2=IA64_PT_REGS_R1_OFFSET+16,sp	// r2 = &pt_regs.r1
 	adds r3=IA64_PT_REGS_R13_OFFSET+16,sp	// r3 = &pt_regs.r13
@@ -199,10 +204,10 @@ ia32_syscall_table:
 	data8 sys_setuid	/* 16-bit version */
 	data8 sys_getuid	/* 16-bit version */
 	data8 compat_sys_stime    /* 25 */
-	data8 sys32_ptrace
+	data8 compat_sys_ptrace
 	data8 sys32_alarm
 	data8 sys_ni_syscall
-	data8 sys32_pause
+	data8 sys_pause
 	data8 compat_sys_utime	  /* 30 */
 	data8 sys_ni_syscall	  /* old stty syscall holder */
 	data8 sys_ni_syscall	  /* old gtty syscall holder */
@@ -215,7 +220,7 @@ ia32_syscall_table:
 	data8 sys_mkdir
 	data8 sys_rmdir		  /* 40 */
 	data8 sys_dup
-	data8 sys32_pipe
+	data8 sys_pipe
 	data8 compat_sys_times
 	data8 sys_ni_syscall	  /* old prof syscall holder */
 	data8 sys32_brk		  /* 45 */
@@ -251,8 +256,8 @@ ia32_syscall_table:
 	data8 compat_sys_setrlimit	  /* 75 */
 	data8 compat_sys_old_getrlimit
 	data8 compat_sys_getrusage
-	data8 sys32_gettimeofday
-	data8 sys32_settimeofday
+	data8 compat_sys_gettimeofday
+	data8 compat_sys_settimeofday
 	data8 sys32_getgroups16	  /* 80 */
 	data8 sys32_setgroups16
 	data8 sys32_old_select
diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h
index dd0c536..0f15349 100644
--- a/arch/ia64/ia32/ia32priv.h
+++ b/arch/ia64/ia32/ia32priv.h
@@ -332,8 +332,8 @@ void ia64_elf32_init(struct pt_regs *regs);
 #define ELF_PLATFORM	NULL
 
 #ifdef __KERNEL__
-# define SET_PERSONALITY(EX,IBCS2)				\
-	(current->personality = (IBCS2) ? PER_SVR4 : PER_LINUX)
+# define SET_PERSONALITY(EX)				\
+	(current->personality = PER_LINUX)
 #endif
 
 #define IA32_EFLAG	0x200
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index bf196cb..5e92ae0 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -118,41 +118,6 @@ sys32_execve (char __user *name, compat_uptr_t __user *argv, compat_uptr_t __use
 	return error;
 }
 
-int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf)
-{
-	compat_ino_t ino;
-	int err;
-
-	if ((u64) stat->size > MAX_NON_LFS ||
-	    !old_valid_dev(stat->dev) ||
-	    !old_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-
-	ino = stat->ino;
-	if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino)
-		return -EOVERFLOW;
-
-	if (clear_user(ubuf, sizeof(*ubuf)))
-		return -EFAULT;
-
-	err  = __put_user(old_encode_dev(stat->dev), &ubuf->st_dev);
-	err |= __put_user(ino, &ubuf->st_ino);
-	err |= __put_user(stat->mode, &ubuf->st_mode);
-	err |= __put_user(stat->nlink, &ubuf->st_nlink);
-	err |= __put_user(high2lowuid(stat->uid), &ubuf->st_uid);
-	err |= __put_user(high2lowgid(stat->gid), &ubuf->st_gid);
-	err |= __put_user(old_encode_dev(stat->rdev), &ubuf->st_rdev);
-	err |= __put_user(stat->size, &ubuf->st_size);
-	err |= __put_user(stat->atime.tv_sec, &ubuf->st_atime);
-	err |= __put_user(stat->atime.tv_nsec, &ubuf->st_atime_nsec);
-	err |= __put_user(stat->mtime.tv_sec, &ubuf->st_mtime);
-	err |= __put_user(stat->mtime.tv_nsec, &ubuf->st_mtime_nsec);
-	err |= __put_user(stat->ctime.tv_sec, &ubuf->st_ctime);
-	err |= __put_user(stat->ctime.tv_nsec, &ubuf->st_ctime_nsec);
-	err |= __put_user(stat->blksize, &ubuf->st_blksize);
-	err |= __put_user(stat->blocks, &ubuf->st_blocks);
-	return err;
-}
 
 #if PAGE_SHIFT > IA32_PAGE_SHIFT
 
@@ -1133,83 +1098,12 @@ sys32_mremap (unsigned int addr, unsigned int old_len, unsigned int new_len,
 	return ret;
 }
 
-asmlinkage long
-sys32_pipe (int __user *fd)
-{
-	int retval;
-	int fds[2];
-
-	retval = do_pipe_flags(fds, 0);
-	if (retval)
-		goto out;
-	if (copy_to_user(fd, fds, sizeof(fds)))
-		retval = -EFAULT;
-  out:
-	return retval;
-}
-
-static inline long
-get_tv32 (struct timeval *o, struct compat_timeval __user *i)
-{
-	return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
-		(__get_user(o->tv_sec, &i->tv_sec) | __get_user(o->tv_usec, &i->tv_usec)));
-}
-
-static inline long
-put_tv32 (struct compat_timeval __user *o, struct timeval *i)
-{
-	return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
-		(__put_user(i->tv_sec, &o->tv_sec) | __put_user(i->tv_usec, &o->tv_usec)));
-}
-
 asmlinkage unsigned long
 sys32_alarm (unsigned int seconds)
 {
 	return alarm_setitimer(seconds);
 }
 
-/* Translations due to time_t size differences.  Which affects all
-   sorts of things, like timeval and itimerval.  */
-
-extern struct timezone sys_tz;
-
-asmlinkage long
-sys32_gettimeofday (struct compat_timeval __user *tv, struct timezone __user *tz)
-{
-	if (tv) {
-		struct timeval ktv;
-		do_gettimeofday(&ktv);
-		if (put_tv32(tv, &ktv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-asmlinkage long
-sys32_settimeofday (struct compat_timeval __user *tv, struct timezone __user *tz)
-{
-	struct timeval ktv;
-	struct timespec kts;
-	struct timezone ktz;
-
-	if (tv) {
-		if (get_tv32(&ktv, tv))
-			return -EFAULT;
-		kts.tv_sec = ktv.tv_sec;
-		kts.tv_nsec = ktv.tv_usec * 1000;
-	}
-	if (tz) {
-		if (copy_from_user(&ktz, tz, sizeof(ktz)))
-			return -EFAULT;
-	}
-
-	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
-}
-
 struct sel_arg_struct {
 	unsigned int n;
 	unsigned int inp;
@@ -1300,25 +1194,6 @@ sys32_waitpid (int pid, unsigned int *stat_addr, int options)
 	return compat_sys_wait4(pid, stat_addr, options, NULL);
 }
 
-static unsigned int
-ia32_peek (struct task_struct *child, unsigned long addr, unsigned int *val)
-{
-	size_t copied;
-	unsigned int ret;
-
-	copied = access_process_vm(child, addr, val, sizeof(*val), 0);
-	return (copied != sizeof(ret)) ? -EIO : 0;
-}
-
-static unsigned int
-ia32_poke (struct task_struct *child, unsigned long addr, unsigned int val)
-{
-
-	if (access_process_vm(child, addr, &val, sizeof(val), 1) != sizeof(val))
-		return -EIO;
-	return 0;
-}
-
 /*
  *  The order in which registers are stored in the ptrace regs structure
  */
@@ -1616,49 +1491,15 @@ restore_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct __u
 	return 0;
 }
 
-asmlinkage long
-sys32_ptrace (int request, pid_t pid, unsigned int addr, unsigned int data)
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+	compat_ulong_t caddr, compat_ulong_t cdata)
 {
-	struct task_struct *child;
-	unsigned int value, tmp;
+	unsigned long addr = caddr;
+	unsigned long data = cdata;
+	unsigned int tmp;
 	long i, ret;
 
-	lock_kernel();
-	if (request == PTRACE_TRACEME) {
-		ret = ptrace_traceme();
-		goto out;
-	}
-
-	child = ptrace_get_task_struct(pid);
-	if (IS_ERR(child)) {
-		ret = PTR_ERR(child);
-		goto out;
-	}
-
-	if (request == PTRACE_ATTACH) {
-		ret = sys_ptrace(request, pid, addr, data);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
-	      case PTRACE_PEEKTEXT:
-	      case PTRACE_PEEKDATA:	/* read word at location addr */
-		ret = ia32_peek(child, addr, &value);
-		if (ret == 0)
-			ret = put_user(value, (unsigned int __user *) compat_ptr(data));
-		else
-			ret = -EIO;
-		goto out_tsk;
-
-	      case PTRACE_POKETEXT:
-	      case PTRACE_POKEDATA:	/* write the word at location addr */
-		ret = ia32_poke(child, addr, data);
-		goto out_tsk;
-
 	      case PTRACE_PEEKUSR:	/* read word at addr in USER area */
 		ret = -EIO;
 		if ((addr & 3) || addr > 17*sizeof(int))
@@ -1723,27 +1564,9 @@ sys32_ptrace (int request, pid_t pid, unsigned int addr, unsigned int data)
 					    compat_ptr(data));
 		break;
 
-	      case PTRACE_GETEVENTMSG:   
-		ret = put_user(child->ptrace_message, (unsigned int __user *) compat_ptr(data));
-		break;
-
-	      case PTRACE_SYSCALL:	/* continue, stop after next syscall */
-	      case PTRACE_CONT:		/* restart after signal. */
-	      case PTRACE_KILL:
-	      case PTRACE_SINGLESTEP:	/* execute chile for one instruction */
-	      case PTRACE_DETACH:	/* detach a process */
-		ret = sys_ptrace(request, pid, addr, data);
-		break;
-
 	      default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-
+		return compat_ptrace_request(child, request, caddr, cdata);
 	}
-  out_tsk:
-	put_task_struct(child);
-  out:
-	unlock_kernel();
 	return ret;
 }
 
@@ -1795,14 +1618,6 @@ out:
 }
 
 asmlinkage int
-sys32_pause (void)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int
 sys32_msync (unsigned int start, unsigned int len, int flags)
 {
 	unsigned int addr;
diff --git a/arch/ia64/include/asm/a.out.h b/arch/ia64/include/asm/a.out.h
deleted file mode 100644
index 193dcfb..0000000
--- a/arch/ia64/include/asm/a.out.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _ASM_IA64_A_OUT_H
-#define _ASM_IA64_A_OUT_H
-
-/*
- * No a.out format has been (or should be) defined so this file is
- * just a dummy that allows us to get binfmt_elf compiled.  It
- * probably would be better to clean up binfmt_elf.c so it does not
- * necessarily depend on there being a.out support.
- *
- * Modified 1998-2002
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
- */
-
-#include <linux/types.h>
-
-struct exec {
-	unsigned long a_info;
-	unsigned long a_text;
-	unsigned long a_data;
-	unsigned long a_bss;
-	unsigned long a_entry;
-};
-
-#define N_TXTADDR(x)	0
-#define N_DATADDR(x)	0
-#define N_BSSADDR(x)	0
-#define N_DRSIZE(x)	0
-#define N_TRSIZE(x)	0
-#define N_SYMSIZE(x)	0
-#define N_TXTOFF(x)	0
-
-#endif /* _ASM_IA64_A_OUT_H */
diff --git a/arch/ia64/include/asm/break.h b/arch/ia64/include/asm/break.h
index f034020..e90c40e 100644
--- a/arch/ia64/include/asm/break.h
+++ b/arch/ia64/include/asm/break.h
@@ -20,4 +20,13 @@
  */
 #define __IA64_BREAK_SYSCALL		0x100000
 
+/*
+ * Xen specific break numbers:
+ */
+#define __IA64_XEN_HYPERCALL		0x1000
+/* [__IA64_XEN_HYPERPRIVOP_START, __IA64_XEN_HYPERPRIVOP_MAX] is used
+   for xen hyperprivops */
+#define __IA64_XEN_HYPERPRIVOP_START	0x1
+#define __IA64_XEN_HYPERPRIVOP_MAX	0x1a
+
 #endif /* _ASM_IA64_BREAK_H */
diff --git a/arch/ia64/include/asm/cacheflush.h b/arch/ia64/include/asm/cacheflush.h
index afcfbda..c8ce271 100644
--- a/arch/ia64/include/asm/cacheflush.h
+++ b/arch/ia64/include/asm/cacheflush.h
@@ -34,6 +34,8 @@ do {						\
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
 extern void flush_icache_range (unsigned long start, unsigned long end);
+extern void clflush_cache_range(void *addr, int size);
+
 
 #define flush_icache_user_range(vma, page, user_addr, len)					\
 do {												\
diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h
index 3db6daf..41ab85d 100644
--- a/arch/ia64/include/asm/device.h
+++ b/arch/ia64/include/asm/device.h
@@ -10,6 +10,9 @@ struct dev_archdata {
 #ifdef CONFIG_ACPI
 	void	*acpi_handle;
 #endif
+#ifdef CONFIG_DMAR
+	void *iommu; /* hook for IOMMU specific extension */
+#endif
 };
 
 #endif /* _ASM_IA64_DEVICE_H */
diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 9f0df9b..bbab7e2 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -7,8 +7,53 @@
  */
 #include <asm/machvec.h>
 #include <linux/scatterlist.h>
+#include <asm/swiotlb.h>
+
+struct dma_mapping_ops {
+	int             (*mapping_error)(struct device *dev,
+					 dma_addr_t dma_addr);
+	void*           (*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t gfp);
+	void            (*free_coherent)(struct device *dev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+	dma_addr_t      (*map_single)(struct device *hwdev, unsigned long ptr,
+				size_t size, int direction);
+	void            (*unmap_single)(struct device *dev, dma_addr_t addr,
+				size_t size, int direction);
+	void            (*sync_single_for_cpu)(struct device *hwdev,
+				dma_addr_t dma_handle, size_t size,
+				int direction);
+	void            (*sync_single_for_device)(struct device *hwdev,
+				dma_addr_t dma_handle, size_t size,
+				int direction);
+	void            (*sync_single_range_for_cpu)(struct device *hwdev,
+				dma_addr_t dma_handle, unsigned long offset,
+				size_t size, int direction);
+	void            (*sync_single_range_for_device)(struct device *hwdev,
+				dma_addr_t dma_handle, unsigned long offset,
+				size_t size, int direction);
+	void            (*sync_sg_for_cpu)(struct device *hwdev,
+				struct scatterlist *sg, int nelems,
+				int direction);
+	void            (*sync_sg_for_device)(struct device *hwdev,
+				struct scatterlist *sg, int nelems,
+				int direction);
+	int             (*map_sg)(struct device *hwdev, struct scatterlist *sg,
+				int nents, int direction);
+	void            (*unmap_sg)(struct device *hwdev,
+				struct scatterlist *sg, int nents,
+				int direction);
+	int             (*dma_supported_op)(struct device *hwdev, u64 mask);
+	int		is_phys;
+};
+
+extern struct dma_mapping_ops *dma_ops;
+extern struct ia64_machine_vector ia64_mv;
+extern void set_iommu_machvec(void);
+
+#define dma_alloc_coherent(dev, size, handle, gfp)	\
+	platform_dma_alloc_coherent(dev, size, handle, (gfp) | GFP_DMA)
 
-#define dma_alloc_coherent	platform_dma_alloc_coherent
 /* coherent mem. is cheap */
 static inline void *
 dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
@@ -94,4 +139,11 @@ dma_cache_sync (struct device *dev, void *vaddr, size_t size,
 
 #define dma_is_consistent(d, h)	(1)	/* all we do is coherent memory... */
 
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+{
+	return dma_ops;
+}
+
+
+
 #endif /* _ASM_IA64_DMA_MAPPING_H */
diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h
index 2acb6b6..86eddee 100644
--- a/arch/ia64/include/asm/elf.h
+++ b/arch/ia64/include/asm/elf.h
@@ -202,7 +202,7 @@ extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst);
    relevant until we have real hardware to play with... */
 #define ELF_PLATFORM	NULL
 
-#define SET_PERSONALITY(ex, ibcs2)	set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex)	set_personality(PER_LINUX)
 #define elf_read_implies_exec(ex, executable_stack)					\
 	((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
 
diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h
new file mode 100644
index 0000000..5fb2bb9
--- /dev/null
+++ b/arch/ia64/include/asm/iommu.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_IA64_IOMMU_H
+#define _ASM_IA64_IOMMU_H 1
+
+#define cpu_has_x2apic 0
+/* 10 seconds */
+#define DMAR_OPERATION_TIMEOUT (((cycles_t) local_cpu_data->itc_freq)*10)
+
+extern void pci_iommu_shutdown(void);
+extern void no_iommu_init(void);
+extern int force_iommu, no_iommu;
+extern int iommu_detected;
+extern void iommu_dma_init(void);
+extern void machvec_init(const char *name);
+extern int forbid_dac;
+
+#endif
diff --git a/arch/ia64/include/asm/kregs.h b/arch/ia64/include/asm/kregs.h
index aefcdfe..39e65f6 100644
--- a/arch/ia64/include/asm/kregs.h
+++ b/arch/ia64/include/asm/kregs.h
@@ -32,7 +32,7 @@
 #define IA64_TR_CURRENT_STACK	1	/* dtr1: maps kernel's memory- & register-stacks */
 
 #define IA64_TR_ALLOC_BASE	2 	/* itr&dtr: Base of dynamic TR resource*/
-#define IA64_TR_ALLOC_MAX	32 	/* Max number for dynamic use*/
+#define IA64_TR_ALLOC_MAX	64 	/* Max number for dynamic use*/
 
 /* Processor status register bits: */
 #define IA64_PSR_BE_BIT		1
diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 1efe513..85db124 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -132,7 +132,7 @@
 #define GPFN_IOSAPIC        (4UL << 60) /* IOSAPIC base */
 #define GPFN_LEGACY_IO      (5UL << 60) /* Legacy I/O base */
 #define GPFN_GFW        (6UL << 60) /* Guest Firmware */
-#define GPFN_HIGH_MMIO      (7UL << 60) /* High MMIO range */
+#define GPFN_PHYS_MMIO      (7UL << 60) /* Directed MMIO Range */
 
 #define GPFN_IO_MASK        (7UL << 60) /* Guest pfn is I/O type */
 #define GPFN_INV_MASK       (1UL << 63) /* Guest pfn is invalid */
@@ -413,6 +413,10 @@ struct kvm_arch {
 	struct kvm_ioapic *vioapic;
 	struct kvm_vm_stat stat;
 	struct kvm_sal_data rdv_sal_data;
+
+	struct list_head assigned_dev_head;
+	struct dmar_domain *intel_iommu_domain;
+	struct hlist_head irq_ack_notifier_list;
 };
 
 union cpuid3_t {
diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h
index 2b850cc..1ea28bc 100644
--- a/arch/ia64/include/asm/machvec.h
+++ b/arch/ia64/include/asm/machvec.h
@@ -120,6 +120,8 @@ extern void machvec_tlb_migrate_finish (struct mm_struct *);
 #  include <asm/machvec_hpsim.h>
 # elif defined (CONFIG_IA64_DIG)
 #  include <asm/machvec_dig.h>
+# elif defined(CONFIG_IA64_DIG_VTD)
+#  include <asm/machvec_dig_vtd.h>
 # elif defined (CONFIG_IA64_HP_ZX1)
 #  include <asm/machvec_hpzx1.h>
 # elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
@@ -128,6 +130,8 @@ extern void machvec_tlb_migrate_finish (struct mm_struct *);
 #  include <asm/machvec_sn2.h>
 # elif defined (CONFIG_IA64_SGI_UV)
 #  include <asm/machvec_uv.h>
+# elif defined (CONFIG_IA64_XEN_GUEST)
+#  include <asm/machvec_xen.h>
 # elif defined (CONFIG_IA64_GENERIC)
 
 # ifdef MACHVEC_PLATFORM_HEADER
diff --git a/arch/ia64/include/asm/machvec_dig_vtd.h b/arch/ia64/include/asm/machvec_dig_vtd.h
new file mode 100644
index 0000000..3400b56
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_dig_vtd.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_MACHVEC_DIG_VTD_h
+#define _ASM_IA64_MACHVEC_DIG_VTD_h
+
+extern ia64_mv_setup_t			dig_setup;
+extern ia64_mv_dma_alloc_coherent	vtd_alloc_coherent;
+extern ia64_mv_dma_free_coherent	vtd_free_coherent;
+extern ia64_mv_dma_map_single_attrs	vtd_map_single_attrs;
+extern ia64_mv_dma_unmap_single_attrs	vtd_unmap_single_attrs;
+extern ia64_mv_dma_map_sg_attrs		vtd_map_sg_attrs;
+extern ia64_mv_dma_unmap_sg_attrs	vtd_unmap_sg_attrs;
+extern ia64_mv_dma_supported		iommu_dma_supported;
+extern ia64_mv_dma_mapping_error	vtd_dma_mapping_error;
+extern ia64_mv_dma_init			pci_iommu_alloc;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name				"dig_vtd"
+#define platform_setup				dig_setup
+#define platform_dma_init			pci_iommu_alloc
+#define platform_dma_alloc_coherent		vtd_alloc_coherent
+#define platform_dma_free_coherent		vtd_free_coherent
+#define platform_dma_map_single_attrs		vtd_map_single_attrs
+#define platform_dma_unmap_single_attrs		vtd_unmap_single_attrs
+#define platform_dma_map_sg_attrs		vtd_map_sg_attrs
+#define platform_dma_unmap_sg_attrs		vtd_unmap_sg_attrs
+#define platform_dma_sync_single_for_cpu	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_cpu		machvec_dma_sync_sg
+#define platform_dma_sync_single_for_device	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_device		machvec_dma_sync_sg
+#define platform_dma_supported			iommu_dma_supported
+#define platform_dma_mapping_error		vtd_dma_mapping_error
+
+#endif /* _ASM_IA64_MACHVEC_DIG_VTD_h */
diff --git a/arch/ia64/include/asm/machvec_init.h b/arch/ia64/include/asm/machvec_init.h
index 7f21249..ef964b2 100644
--- a/arch/ia64/include/asm/machvec_init.h
+++ b/arch/ia64/include/asm/machvec_init.h
@@ -1,3 +1,4 @@
+#include <asm/iommu.h>
 #include <asm/machvec.h>
 
 extern ia64_mv_send_ipi_t ia64_send_ipi;
diff --git a/arch/ia64/include/asm/machvec_xen.h b/arch/ia64/include/asm/machvec_xen.h
new file mode 100644
index 0000000..55f9228
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_xen.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_MACHVEC_XEN_h
+#define _ASM_IA64_MACHVEC_XEN_h
+
+extern ia64_mv_setup_t			dig_setup;
+extern ia64_mv_cpu_init_t		xen_cpu_init;
+extern ia64_mv_irq_init_t		xen_irq_init;
+extern ia64_mv_send_ipi_t		xen_platform_send_ipi;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name				"xen"
+#define platform_setup				dig_setup
+#define platform_cpu_init			xen_cpu_init
+#define platform_irq_init			xen_irq_init
+#define platform_send_ipi			xen_platform_send_ipi
+
+#endif /* _ASM_IA64_MACHVEC_XEN_h */
diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h
index 7245a57..6bc96ee 100644
--- a/arch/ia64/include/asm/meminit.h
+++ b/arch/ia64/include/asm/meminit.h
@@ -18,10 +18,11 @@
  * 	- crash dumping code reserved region
  * 	- Kernel memory map built from EFI memory map
  * 	- ELF core header
+ *	- xen start info if CONFIG_XEN
  *
  * More could be added if necessary
  */
-#define IA64_MAX_RSVD_REGIONS 8
+#define IA64_MAX_RSVD_REGIONS 9
 
 struct rsvd_region {
 	unsigned long start;	/* virtual address of beginning of element */
diff --git a/arch/ia64/include/asm/native/inst.h b/arch/ia64/include/asm/native/inst.h
index c8efbf7..0a1026c 100644
--- a/arch/ia64/include/asm/native/inst.h
+++ b/arch/ia64/include/asm/native/inst.h
@@ -36,8 +36,13 @@
 	;;					\
 	movl clob = PARAVIRT_POISON;		\
 	;;
+# define CLOBBER_PRED(pred_clob)		\
+	;;					\
+	cmp.eq pred_clob, p0 = r0, r0		\
+	;;
 #else
-# define CLOBBER(clob)		/* nothing */
+# define CLOBBER(clob)			/* nothing */
+# define CLOBBER_PRED(pred_clob)	/* nothing */
 #endif
 
 #define MOV_FROM_IFA(reg)	\
@@ -136,7 +141,8 @@
 
 #define SSM_PSR_I(pred, pred_clob, clob)	\
 (pred)	ssm psr.i				\
-	CLOBBER(clob)
+	CLOBBER(clob)				\
+	CLOBBER_PRED(pred_clob)
 
 #define RSM_PSR_I(pred, clob0, clob1)	\
 (pred)	rsm psr.i			\
diff --git a/arch/ia64/include/asm/native/pvchk_inst.h b/arch/ia64/include/asm/native/pvchk_inst.h
new file mode 100644
index 0000000..b8e6eb1
--- /dev/null
+++ b/arch/ia64/include/asm/native/pvchk_inst.h
@@ -0,0 +1,263 @@
+#ifndef _ASM_NATIVE_PVCHK_INST_H
+#define _ASM_NATIVE_PVCHK_INST_H
+
+/******************************************************************************
+ * arch/ia64/include/asm/native/pvchk_inst.h
+ * Checker for paravirtualizations of privileged operations.
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *      Dan Magenheimer <dan.magenheimer@hp.com>
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+/**********************************************
+ * Instructions paravirtualized for correctness
+ **********************************************/
+
+/* "fc" and "thash" are privilege-sensitive instructions, meaning they
+ *  may have different semantics depending on whether they are executed
+ *  at PL0 vs PL!=0.  When paravirtualized, these instructions mustn't
+ *  be allowed to execute directly, lest incorrect semantics result.
+ */
+
+#define fc	.error "fc should not be used directly."
+#define thash	.error "thash should not be used directly."
+
+/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag"
+ * is not currently used (though it may be in a long-format VHPT system!)
+ * and the semantics of cover only change if psr.ic is off which is very
+ * rare (and currently non-existent outside of assembly code
+ */
+#define ttag	.error "ttag should not be used directly."
+#define cover	.error "cover should not be used directly."
+
+/* There are also privilege-sensitive registers.  These registers are
+ * readable at any privilege level but only writable at PL0.
+ */
+#define cpuid	.error "cpuid should not be used directly."
+#define pmd	.error "pmd should not be used directly."
+
+/*
+ * mov ar.eflag =
+ * mov = ar.eflag
+ */
+
+/**********************************************
+ * Instructions paravirtualized for performance
+ **********************************************/
+/*
+ * Those instructions include '.' which can't be handled by cpp.
+ * or can't be handled by cpp easily.
+ * They are handled by sed instead of cpp.
+ */
+
+/* for .S
+ * itc.i
+ * itc.d
+ *
+ * bsw.0
+ * bsw.1
+ *
+ * ssm psr.ic | PSR_DEFAULT_BITS
+ * ssm psr.ic
+ * rsm psr.ic
+ * ssm psr.i
+ * rsm psr.i
+ * rsm psr.i | psr.ic
+ * rsm psr.dt
+ * ssm psr.dt
+ *
+ * mov = cr.ifa
+ * mov = cr.itir
+ * mov = cr.isr
+ * mov = cr.iha
+ * mov = cr.ipsr
+ * mov = cr.iim
+ * mov = cr.iip
+ * mov = cr.ivr
+ * mov = psr
+ *
+ * mov cr.ifa =
+ * mov cr.itir =
+ * mov cr.iha =
+ * mov cr.ipsr =
+ * mov cr.ifs =
+ * mov cr.iip =
+ * mov cr.kr =
+ */
+
+/* for intrinsics
+ * ssm psr.i
+ * rsm psr.i
+ * mov = psr
+ * mov = ivr
+ * mov = tpr
+ * mov cr.itm =
+ * mov eoi =
+ * mov rr[] =
+ * mov = rr[]
+ * mov = kr
+ * mov kr =
+ * ptc.ga
+ */
+
+/*************************************************************
+ * define paravirtualized instrcution macros as nop to ingore.
+ * and check whether arguments are appropriate.
+ *************************************************************/
+
+/* check whether reg is a regular register */
+.macro is_rreg_in reg
+	.ifc "\reg", "r0"
+		nop 0
+		.exitm
+	.endif
+	;;
+	mov \reg = r0
+	;;
+.endm
+#define IS_RREG_IN(reg)	is_rreg_in reg ;
+
+#define IS_RREG_OUT(reg)			\
+	;;					\
+	mov reg = r0				\
+	;;
+
+#define IS_RREG_CLOB(reg)	IS_RREG_OUT(reg)
+
+/* check whether pred is a predicate register */
+#define IS_PRED_IN(pred)			\
+	;;					\
+	(pred)	nop 0				\
+	;;
+
+#define IS_PRED_OUT(pred)			\
+	;;					\
+	cmp.eq pred, p0 = r0, r0		\
+	;;
+
+#define IS_PRED_CLOB(pred)	IS_PRED_OUT(pred)
+
+
+#define DO_SAVE_MIN(__COVER, SAVE_IFS, EXTRA, WORKAROUND)	\
+	nop 0
+#define MOV_FROM_IFA(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_ITIR(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_ISR(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_IHA(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_IPSR(pred, reg)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_IIM(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_IIP(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_IVR(reg, clob)			\
+	IS_RREG_OUT(reg)			\
+	IS_RREG_CLOB(clob)
+#define MOV_FROM_PSR(pred, reg, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_OUT(reg)			\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_IFA(reg, clob)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_ITIR(pred, reg, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_IHA(pred, reg, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_IPSR(pred, reg, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_IFS(pred, reg, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_IIP(reg, clob)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_KR(kr, reg, clob0, clob1)	\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)
+#define ITC_I(pred, reg, clob)			\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define ITC_D(pred, reg, clob)			\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define ITC_I_AND_D(pred_i, pred_d, reg, clob)	\
+	IS_PRED_IN(pred_i)			\
+	IS_PRED_IN(pred_d)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define THASH(pred, reg0, reg1, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_OUT(reg0)			\
+	IS_RREG_IN(reg1)			\
+	IS_RREG_CLOB(clob)
+#define SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(clob0, clob1)	\
+	IS_RREG_CLOB(clob0)					\
+	IS_RREG_CLOB(clob1)
+#define SSM_PSR_IC_AND_SRLZ_D(clob0, clob1)	\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)
+#define RSM_PSR_IC(clob)			\
+	IS_RREG_CLOB(clob)
+#define SSM_PSR_I(pred, pred_clob, clob)	\
+	IS_PRED_IN(pred)			\
+	IS_PRED_CLOB(pred_clob)			\
+	IS_RREG_CLOB(clob)
+#define RSM_PSR_I(pred, clob0, clob1)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)
+#define RSM_PSR_I_IC(clob0, clob1, clob2)	\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)			\
+	IS_RREG_CLOB(clob2)
+#define RSM_PSR_DT				\
+	nop 0
+#define SSM_PSR_DT_AND_SRLZ_I			\
+	nop 0
+#define BSW_0(clob0, clob1, clob2)		\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)			\
+	IS_RREG_CLOB(clob2)
+#define BSW_1(clob0, clob1)			\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)
+#define COVER					\
+	nop 0
+#define RFI					\
+	br.ret.sptk.many rp /* defining nop causes dependency error */
+
+#endif /* _ASM_NATIVE_PVCHK_INST_H */
diff --git a/arch/ia64/include/asm/paravirt.h b/arch/ia64/include/asm/paravirt.h
index 660cab0..2bf3636 100644
--- a/arch/ia64/include/asm/paravirt.h
+++ b/arch/ia64/include/asm/paravirt.h
@@ -117,7 +117,7 @@ static inline void paravirt_post_smp_prepare_boot_cpu(void)
 struct pv_iosapic_ops {
 	void (*pcat_compat_init)(void);
 
-	struct irq_chip *(*get_irq_chip)(unsigned long trigger);
+	struct irq_chip *(*__get_irq_chip)(unsigned long trigger);
 
 	unsigned int (*__read)(char __iomem *iosapic, unsigned int reg);
 	void (*__write)(char __iomem *iosapic, unsigned int reg, u32 val);
@@ -135,7 +135,7 @@ iosapic_pcat_compat_init(void)
 static inline struct irq_chip*
 iosapic_get_irq_chip(unsigned long trigger)
 {
-	return pv_iosapic_ops.get_irq_chip(trigger);
+	return pv_iosapic_ops.__get_irq_chip(trigger);
 }
 
 static inline unsigned int
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index 0149097..1d660d8 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -95,16 +95,8 @@ extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
 				enum pci_mmap_state mmap_state, int write_combine);
 #define HAVE_PCI_LEGACY
 extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
-				      struct vm_area_struct *vma);
-extern ssize_t pci_read_legacy_io(struct kobject *kobj,
-				  struct bin_attribute *bin_attr,
-				  char *buf, loff_t off, size_t count);
-extern ssize_t pci_write_legacy_io(struct kobject *kobj,
-				   struct bin_attribute *bin_attr,
-				   char *buf, loff_t off, size_t count);
-extern int pci_mmap_legacy_mem(struct kobject *kobj,
-			       struct bin_attribute *attr,
-			       struct vm_area_struct *vma);
+				      struct vm_area_struct *vma,
+				      enum pci_mmap_state mmap_state);
 
 #define pci_get_legacy_mem platform_pci_get_legacy_mem
 #define pci_legacy_read platform_pci_legacy_read
@@ -164,4 +156,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 	return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14);
 }
 
+#ifdef CONFIG_DMAR
+extern void pci_iommu_alloc(void);
+#endif
 #endif /* _ASM_IA64_PCI_H */
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 15f8dcf..6417c1e 100644
--- a/arch/ia64/include/asm/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
@@ -240,6 +240,12 @@ struct switch_stack {
  */
 # define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri)
 
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+	/* FIXME: should this be bspstore + nr_dirty regs? */
+	return regs->ar_bspstore;
+}
+
 #define regs_return_value(regs) ((regs)->r8)
 
 /* Conserve space in histogram by encoding slot bits in address
@@ -319,6 +325,8 @@ struct switch_stack {
   #define arch_has_block_step()   (1)
   extern void user_enable_block_step(struct task_struct *);
 
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
 #endif /* !__KERNEL__ */
 
 /* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
diff --git a/arch/ia64/include/asm/pvclock-abi.h b/arch/ia64/include/asm/pvclock-abi.h
new file mode 100644
index 0000000..44ef9ef
--- /dev/null
+++ b/arch/ia64/include/asm/pvclock-abi.h
@@ -0,0 +1,48 @@
+/*
+ * same structure to x86's
+ * Hopefully asm-x86/pvclock-abi.h would be moved to somewhere more generic.
+ * For now, define same duplicated definitions.
+ */
+
+#ifndef _ASM_IA64__PVCLOCK_ABI_H
+#define _ASM_IA64__PVCLOCK_ABI_H
+#ifndef __ASSEMBLY__
+
+/*
+ * These structs MUST NOT be changed.
+ * They are the ABI between hypervisor and guest OS.
+ * Both Xen and KVM are using this.
+ *
+ * pvclock_vcpu_time_info holds the system time and the tsc timestamp
+ * of the last update. So the guest can use the tsc delta to get a
+ * more precise system time.  There is one per virtual cpu.
+ *
+ * pvclock_wall_clock references the point in time when the system
+ * time was zero (usually boot time), thus the guest calculates the
+ * current wall clock by adding the system time.
+ *
+ * Protocol for the "version" fields is: hypervisor raises it (making
+ * it uneven) before it starts updating the fields and raises it again
+ * (making it even) when it is done.  Thus the guest can make sure the
+ * time values it got are consistent by checking the version before
+ * and after reading them.
+ */
+
+struct pvclock_vcpu_time_info {
+	u32   version;
+	u32   pad0;
+	u64   tsc_timestamp;
+	u64   system_time;
+	u32   tsc_to_system_mul;
+	s8    tsc_shift;
+	u8    pad[3];
+} __attribute__((__packed__)); /* 32 bytes */
+
+struct pvclock_wall_clock {
+	u32   version;
+	u32   sec;
+	u32   nsec;
+} __attribute__((__packed__));
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_IA64__PVCLOCK_ABI_H */
diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h
index f667998..1a873b3 100644
--- a/arch/ia64/include/asm/sections.h
+++ b/arch/ia64/include/asm/sections.h
@@ -11,6 +11,9 @@
 #include <asm-generic/sections.h>
 
 extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
+#ifdef	CONFIG_SMP
+extern char __cpu0_per_cpu[];
+#endif
 extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
 extern char __start___rse_patchlist[], __end___rse_patchlist[];
 extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
diff --git a/arch/ia64/include/asm/siginfo.h b/arch/ia64/include/asm/siginfo.h
index 9294e4b..118d429 100644
--- a/arch/ia64/include/asm/siginfo.h
+++ b/arch/ia64/include/asm/siginfo.h
@@ -113,11 +113,6 @@ typedef struct siginfo {
 #undef NSIGSEGV
 #define NSIGSEGV	3
 
-/*
- * SIGTRAP si_codes
- */
-#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
-#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
 #undef NSIGTRAP
 #define NSIGTRAP	4
 
diff --git a/arch/ia64/include/asm/statfs.h b/arch/ia64/include/asm/statfs.h
index 8110979..1e58966 100644
--- a/arch/ia64/include/asm/statfs.h
+++ b/arch/ia64/include/asm/statfs.h
@@ -8,55 +8,13 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  */
 
-#ifndef __KERNEL_STRICT_NAMES
-# include <linux/types.h>
-typedef __kernel_fsid_t	fsid_t;
-#endif
-
 /*
- * This is ugly --- we're already 64-bit, so just duplicate the definitions
+ * We need compat_statfs64 to be packed, because the i386 ABI won't
+ * add padding at the end to bring it to a multiple of 8 bytes, but
+ * the IA64 ABI will.
  */
-struct statfs {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
-
-
-struct statfs64 {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
+#define ARCH_PACK_COMPAT_STATFS64 __attribute__((packed,aligned(4)))
 
-struct compat_statfs64 {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u64 f_blocks;
-	__u64 f_bfree;
-	__u64 f_bavail;
-	__u64 f_files;
-	__u64 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-} __attribute__((packed));
+#include <asm-generic/statfs.h>
 
 #endif /* _ASM_IA64_STATFS_H */
diff --git a/arch/ia64/include/asm/swiotlb.h b/arch/ia64/include/asm/swiotlb.h
new file mode 100644
index 0000000..fb79423
--- /dev/null
+++ b/arch/ia64/include/asm/swiotlb.h
@@ -0,0 +1,56 @@
+#ifndef ASM_IA64__SWIOTLB_H
+#define ASM_IA64__SWIOTLB_H
+
+#include <linux/dma-mapping.h>
+
+/* SWIOTLB interface */
+
+extern dma_addr_t swiotlb_map_single(struct device *hwdev, void *ptr,
+				     size_t size, int dir);
+extern void *swiotlb_alloc_coherent(struct device *hwdev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t flags);
+extern void swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
+				 size_t size, int dir);
+extern void swiotlb_sync_single_for_cpu(struct device *hwdev,
+					dma_addr_t dev_addr,
+					size_t size, int dir);
+extern void swiotlb_sync_single_for_device(struct device *hwdev,
+					   dma_addr_t dev_addr,
+					   size_t size, int dir);
+extern void swiotlb_sync_single_range_for_cpu(struct device *hwdev,
+					      dma_addr_t dev_addr,
+					      unsigned long offset,
+					      size_t size, int dir);
+extern void swiotlb_sync_single_range_for_device(struct device *hwdev,
+						 dma_addr_t dev_addr,
+						 unsigned long offset,
+						 size_t size, int dir);
+extern void swiotlb_sync_sg_for_cpu(struct device *hwdev,
+				    struct scatterlist *sg, int nelems,
+				    int dir);
+extern void swiotlb_sync_sg_for_device(struct device *hwdev,
+				       struct scatterlist *sg, int nelems,
+				       int dir);
+extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg,
+			  int nents, int direction);
+extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg,
+			     int nents, int direction);
+extern int swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
+extern void swiotlb_free_coherent(struct device *hwdev, size_t size,
+				  void *vaddr, dma_addr_t dma_handle);
+extern int swiotlb_dma_supported(struct device *hwdev, u64 mask);
+extern void swiotlb_init(void);
+
+extern int swiotlb_force;
+
+#ifdef CONFIG_SWIOTLB
+extern int swiotlb;
+extern void pci_swiotlb_init(void);
+#else
+#define swiotlb 0
+static inline void pci_swiotlb_init(void)
+{
+}
+#endif
+
+#endif /* ASM_IA64__SWIOTLB_H */
diff --git a/arch/ia64/include/asm/sync_bitops.h b/arch/ia64/include/asm/sync_bitops.h
new file mode 100644
index 0000000..593c12e
--- /dev/null
+++ b/arch/ia64/include/asm/sync_bitops.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_SYNC_BITOPS_H
+#define _ASM_IA64_SYNC_BITOPS_H
+
+/*
+ * Copyright (C) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *
+ * Based on synch_bitops.h which Dan Magenhaimer wrote.
+ *
+ * bit operations which provide guaranteed strong synchronisation
+ * when communicating with Xen or other guest OSes running on other CPUs.
+ */
+
+static inline void sync_set_bit(int nr, volatile void *addr)
+{
+	set_bit(nr, addr);
+}
+
+static inline void sync_clear_bit(int nr, volatile void *addr)
+{
+	clear_bit(nr, addr);
+}
+
+static inline void sync_change_bit(int nr, volatile void *addr)
+{
+	change_bit(nr, addr);
+}
+
+static inline int sync_test_and_set_bit(int nr, volatile void *addr)
+{
+	return test_and_set_bit(nr, addr);
+}
+
+static inline int sync_test_and_clear_bit(int nr, volatile void *addr)
+{
+	return test_and_clear_bit(nr, addr);
+}
+
+static inline int sync_test_and_change_bit(int nr, volatile void *addr)
+{
+	return test_and_change_bit(nr, addr);
+}
+
+static inline int sync_test_bit(int nr, const volatile void *addr)
+{
+	return test_bit(nr, addr);
+}
+
+#define sync_cmpxchg(ptr, old, new)				\
+	((__typeof__(*(ptr)))cmpxchg_acq((ptr), (old), (new)))
+
+#endif /* _ASM_IA64_SYNC_BITOPS_H */
diff --git a/arch/ia64/include/asm/syscall.h b/arch/ia64/include/asm/syscall.h
new file mode 100644
index 0000000..2f758a4
--- /dev/null
+++ b/arch/ia64/include/asm/syscall.h
@@ -0,0 +1,163 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Intel Corp.  Shaohua Li <shaohua.li@intel.com>
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+#include <linux/sched.h>
+#include <linux/err.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	if ((long)regs->cr_ifs < 0) /* Not a syscall */
+		return -1;
+
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs))
+		return regs->r1;
+#endif
+
+	return regs->r15;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs))
+		regs->r8 = regs->r1;
+#endif
+
+	/* do nothing */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs))
+		return regs->r8;
+#endif
+
+	return regs->r10 == -1 ? regs->r8:0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->r8;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs)) {
+		regs->r8 = (long) error ? error : val;
+		return;
+	}
+#endif
+
+	if (error) {
+		/* error < 0, but ia64 uses > 0 return value */
+		regs->r8 = -error;
+		regs->r10 = -1;
+	} else {
+		regs->r8 = val;
+		regs->r10 = 0;
+	}
+}
+
+extern void ia64_syscall_get_set_arguments(struct task_struct *task,
+	struct pt_regs *regs, unsigned int i, unsigned int n,
+	unsigned long *args, int rw);
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs)) {
+		switch (i + n) {
+		case 6:
+			if (!n--) break;
+			*args++ = regs->r13;
+		case 5:
+			if (!n--) break;
+			*args++ = regs->r15;
+		case 4:
+			if (!n--) break;
+			*args++ = regs->r14;
+		case 3:
+			if (!n--) break;
+			*args++ = regs->r10;
+		case 2:
+			if (!n--) break;
+			*args++ = regs->r9;
+		case 1:
+			if (!n--) break;
+			*args++ = regs->r11;
+		case 0:
+			if (!n--) break;
+		default:
+			BUG();
+			break;
+		}
+
+		return;
+	}
+#endif
+	ia64_syscall_get_set_arguments(task, regs, i, n, args, 0);
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs)) {
+		switch (i + n) {
+		case 6:
+			if (!n--) break;
+			regs->r13 = *args++;
+		case 5:
+			if (!n--) break;
+			regs->r15 = *args++;
+		case 4:
+			if (!n--) break;
+			regs->r14 = *args++;
+		case 3:
+			if (!n--) break;
+			regs->r10 = *args++;
+		case 2:
+			if (!n--) break;
+			regs->r9 = *args++;
+		case 1:
+			if (!n--) break;
+			regs->r11 = *args++;
+		case 0:
+			if (!n--) break;
+		}
+
+		return;
+	}
+#endif
+	ia64_syscall_get_set_arguments(task, regs, i, n, args, 1);
+}
+#endif	/* _ASM_SYSCALL_H */
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index 7c60fcd..ae69226 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -87,9 +87,6 @@ struct thread_info {
 #define alloc_task_struct()	((struct task_struct *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER))
 #define free_task_struct(tsk)	free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
 
-#define tsk_set_notify_resume(tsk) \
-	set_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME)
-extern void tsk_clear_notify_resume(struct task_struct *tsk);
 #endif /* !__ASSEMBLY */
 
 /*
diff --git a/arch/ia64/include/asm/timex.h b/arch/ia64/include/asm/timex.h
index 05a6baf..4e03cfe 100644
--- a/arch/ia64/include/asm/timex.h
+++ b/arch/ia64/include/asm/timex.h
@@ -39,4 +39,6 @@ get_cycles (void)
 	return ret;
 }
 
+extern void ia64_cpu_local_tick (void);
+
 #endif /* _ASM_IA64_TIMEX_H */
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index d535833..f791576 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -337,6 +337,7 @@
 # define __ARCH_WANT_SYS_NICE
 # define __ARCH_WANT_SYS_OLD_GETRLIMIT
 # define __ARCH_WANT_SYS_OLDUMOUNT
+# define __ARCH_WANT_SYS_PAUSE
 # define __ARCH_WANT_SYS_SIGPENDING
 # define __ARCH_WANT_SYS_SIGPROCMASK
 # define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h
new file mode 100644
index 0000000..7324878
--- /dev/null
+++ b/arch/ia64/include/asm/xen/events.h
@@ -0,0 +1,50 @@
+/******************************************************************************
+ * arch/ia64/include/asm/xen/events.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef _ASM_IA64_XEN_EVENTS_H
+#define _ASM_IA64_XEN_EVENTS_H
+
+enum ipi_vector {
+	XEN_RESCHEDULE_VECTOR,
+	XEN_IPI_VECTOR,
+	XEN_CMCP_VECTOR,
+	XEN_CPEP_VECTOR,
+
+	XEN_NR_IPIS,
+};
+
+static inline int xen_irqs_disabled(struct pt_regs *regs)
+{
+	return !(ia64_psr(regs)->i);
+}
+
+static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+	old_regs = set_irq_regs(regs);
+	irq_enter();
+	__do_IRQ(irq);
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+#define irq_ctx_init(cpu)	do { } while (0)
+
+#endif /* _ASM_IA64_XEN_EVENTS_H */
diff --git a/arch/ia64/include/asm/xen/grant_table.h b/arch/ia64/include/asm/xen/grant_table.h
new file mode 100644
index 0000000..2b1fae0
--- /dev/null
+++ b/arch/ia64/include/asm/xen/grant_table.h
@@ -0,0 +1,29 @@
+/******************************************************************************
+ * arch/ia64/include/asm/xen/grant_table.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ASM_IA64_XEN_GRANT_TABLE_H
+#define _ASM_IA64_XEN_GRANT_TABLE_H
+
+struct vm_struct *xen_alloc_vm_area(unsigned long size);
+void xen_free_vm_area(struct vm_struct *area);
+
+#endif /* _ASM_IA64_XEN_GRANT_TABLE_H */
diff --git a/arch/ia64/include/asm/xen/hypercall.h b/arch/ia64/include/asm/xen/hypercall.h
new file mode 100644
index 0000000..96fc623
--- /dev/null
+++ b/arch/ia64/include/asm/xen/hypercall.h
@@ -0,0 +1,265 @@
+/******************************************************************************
+ * hypercall.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Copyright (c) 2002-2004, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _ASM_IA64_XEN_HYPERCALL_H
+#define _ASM_IA64_XEN_HYPERCALL_H
+
+#include <xen/interface/xen.h>
+#include <xen/interface/physdev.h>
+#include <xen/interface/sched.h>
+#include <asm/xen/xcom_hcall.h>
+struct xencomm_handle;
+extern unsigned long __hypercall(unsigned long a1, unsigned long a2,
+				 unsigned long a3, unsigned long a4,
+				 unsigned long a5, unsigned long cmd);
+
+/*
+ * Assembler stubs for hyper-calls.
+ */
+
+#define _hypercall0(type, name)					\
+({								\
+	long __res;						\
+	__res = __hypercall(0, 0, 0, 0, 0, __HYPERVISOR_##name);\
+	(type)__res;						\
+})
+
+#define _hypercall1(type, name, a1)				\
+({								\
+	long __res;						\
+	__res = __hypercall((unsigned long)a1,			\
+			     0, 0, 0, 0, __HYPERVISOR_##name);	\
+	(type)__res;						\
+})
+
+#define _hypercall2(type, name, a1, a2)				\
+({								\
+	long __res;						\
+	__res = __hypercall((unsigned long)a1,			\
+			    (unsigned long)a2,			\
+			    0, 0, 0, __HYPERVISOR_##name);	\
+	(type)__res;						\
+})
+
+#define _hypercall3(type, name, a1, a2, a3)			\
+({								\
+	long __res;						\
+	__res = __hypercall((unsigned long)a1,			\
+			    (unsigned long)a2,			\
+			    (unsigned long)a3,			\
+			    0, 0, __HYPERVISOR_##name);		\
+	(type)__res;						\
+})
+
+#define _hypercall4(type, name, a1, a2, a3, a4)			\
+({								\
+	long __res;						\
+	__res = __hypercall((unsigned long)a1,			\
+			    (unsigned long)a2,			\
+			    (unsigned long)a3,			\
+			    (unsigned long)a4,			\
+			    0, __HYPERVISOR_##name);		\
+	(type)__res;						\
+})
+
+#define _hypercall5(type, name, a1, a2, a3, a4, a5)		\
+({								\
+	long __res;						\
+	__res = __hypercall((unsigned long)a1,			\
+			    (unsigned long)a2,			\
+			    (unsigned long)a3,			\
+			    (unsigned long)a4,			\
+			    (unsigned long)a5,			\
+			    __HYPERVISOR_##name);		\
+	(type)__res;						\
+})
+
+
+static inline int
+xencomm_arch_hypercall_sched_op(int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, sched_op_new, cmd, arg);
+}
+
+static inline long
+HYPERVISOR_set_timer_op(u64 timeout)
+{
+	unsigned long timeout_hi = (unsigned long)(timeout >> 32);
+	unsigned long timeout_lo = (unsigned long)timeout;
+	return _hypercall2(long, set_timer_op, timeout_lo, timeout_hi);
+}
+
+static inline int
+xencomm_arch_hypercall_multicall(struct xencomm_handle *call_list,
+				 int nr_calls)
+{
+	return _hypercall2(int, multicall, call_list, nr_calls);
+}
+
+static inline int
+xencomm_arch_hypercall_memory_op(unsigned int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, memory_op, cmd, arg);
+}
+
+static inline int
+xencomm_arch_hypercall_event_channel_op(int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, event_channel_op, cmd, arg);
+}
+
+static inline int
+xencomm_arch_hypercall_xen_version(int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, xen_version, cmd, arg);
+}
+
+static inline int
+xencomm_arch_hypercall_console_io(int cmd, int count,
+				  struct xencomm_handle *str)
+{
+	return _hypercall3(int, console_io, cmd, count, str);
+}
+
+static inline int
+xencomm_arch_hypercall_physdev_op(int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, physdev_op, cmd, arg);
+}
+
+static inline int
+xencomm_arch_hypercall_grant_table_op(unsigned int cmd,
+				      struct xencomm_handle *uop,
+				      unsigned int count)
+{
+	return _hypercall3(int, grant_table_op, cmd, uop, count);
+}
+
+int HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count);
+
+extern int xencomm_arch_hypercall_suspend(struct xencomm_handle *arg);
+
+static inline int
+xencomm_arch_hypercall_callback_op(int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, callback_op, cmd, arg);
+}
+
+static inline long
+xencomm_arch_hypercall_vcpu_op(int cmd, int cpu, void *arg)
+{
+	return _hypercall3(long, vcpu_op, cmd, cpu, arg);
+}
+
+static inline int
+HYPERVISOR_physdev_op(int cmd, void *arg)
+{
+	switch (cmd) {
+	case PHYSDEVOP_eoi:
+		return _hypercall1(int, ia64_fast_eoi,
+				   ((struct physdev_eoi *)arg)->irq);
+	default:
+		return xencomm_hypercall_physdev_op(cmd, arg);
+	}
+}
+
+static inline long
+xencomm_arch_hypercall_opt_feature(struct xencomm_handle *arg)
+{
+	return _hypercall1(long, opt_feature, arg);
+}
+
+/* for balloon driver */
+#define HYPERVISOR_update_va_mapping(va, new_val, flags) (0)
+
+/* Use xencomm to do hypercalls.  */
+#define HYPERVISOR_sched_op xencomm_hypercall_sched_op
+#define HYPERVISOR_event_channel_op xencomm_hypercall_event_channel_op
+#define HYPERVISOR_callback_op xencomm_hypercall_callback_op
+#define HYPERVISOR_multicall xencomm_hypercall_multicall
+#define HYPERVISOR_xen_version xencomm_hypercall_xen_version
+#define HYPERVISOR_console_io xencomm_hypercall_console_io
+#define HYPERVISOR_memory_op xencomm_hypercall_memory_op
+#define HYPERVISOR_suspend xencomm_hypercall_suspend
+#define HYPERVISOR_vcpu_op xencomm_hypercall_vcpu_op
+#define HYPERVISOR_opt_feature xencomm_hypercall_opt_feature
+
+/* to compile gnttab_copy_grant_page() in drivers/xen/core/gnttab.c */
+#define HYPERVISOR_mmu_update(req, count, success_count, domid) ({ BUG(); 0; })
+
+static inline int
+HYPERVISOR_shutdown(
+	unsigned int reason)
+{
+	struct sched_shutdown sched_shutdown = {
+		.reason = reason
+	};
+
+	int rc = HYPERVISOR_sched_op(SCHEDOP_shutdown, &sched_shutdown);
+
+	return rc;
+}
+
+/* for netfront.c, netback.c */
+#define MULTI_UVMFLAGS_INDEX 0 /* XXX any value */
+
+static inline void
+MULTI_update_va_mapping(
+	struct multicall_entry *mcl, unsigned long va,
+	pte_t new_val, unsigned long flags)
+{
+	mcl->op = __HYPERVISOR_update_va_mapping;
+	mcl->result = 0;
+}
+
+static inline void
+MULTI_grant_table_op(struct multicall_entry *mcl, unsigned int cmd,
+	void *uop, unsigned int count)
+{
+	mcl->op = __HYPERVISOR_grant_table_op;
+	mcl->args[0] = cmd;
+	mcl->args[1] = (unsigned long)uop;
+	mcl->args[2] = count;
+}
+
+static inline void
+MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req,
+		 int count, int *success_count, domid_t domid)
+{
+	mcl->op = __HYPERVISOR_mmu_update;
+	mcl->args[0] = (unsigned long)req;
+	mcl->args[1] = count;
+	mcl->args[2] = (unsigned long)success_count;
+	mcl->args[3] = domid;
+}
+
+#endif /* _ASM_IA64_XEN_HYPERCALL_H */
diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h
new file mode 100644
index 0000000..7a804e8
--- /dev/null
+++ b/arch/ia64/include/asm/xen/hypervisor.h
@@ -0,0 +1,89 @@
+/******************************************************************************
+ * hypervisor.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Copyright (c) 2002-2004, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _ASM_IA64_XEN_HYPERVISOR_H
+#define _ASM_IA64_XEN_HYPERVISOR_H
+
+#ifdef CONFIG_XEN
+
+#include <linux/init.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/version.h>	/* to compile feature.c */
+#include <xen/features.h>		/* to comiple xen-netfront.c */
+#include <asm/xen/hypercall.h>
+
+/* xen_domain_type is set before executing any C code by early_xen_setup */
+enum xen_domain_type {
+	XEN_NATIVE,
+	XEN_PV_DOMAIN,
+	XEN_HVM_DOMAIN,
+};
+
+extern enum xen_domain_type xen_domain_type;
+
+#define xen_domain()		(xen_domain_type != XEN_NATIVE)
+#define xen_pv_domain()		(xen_domain_type == XEN_PV_DOMAIN)
+#define xen_initial_domain()	(xen_pv_domain() && \
+				 (xen_start_info->flags & SIF_INITDOMAIN))
+#define xen_hvm_domain()	(xen_domain_type == XEN_HVM_DOMAIN)
+
+/* deprecated. remove this */
+#define is_running_on_xen()	(xen_domain_type == XEN_PV_DOMAIN)
+
+extern struct shared_info *HYPERVISOR_shared_info;
+extern struct start_info *xen_start_info;
+
+void __init xen_setup_vcpu_info_placement(void);
+void force_evtchn_callback(void);
+
+/* for drivers/xen/balloon/balloon.c */
+#ifdef CONFIG_XEN_SCRUB_PAGES
+#define scrub_pages(_p, _n) memset((void *)(_p), 0, (_n) << PAGE_SHIFT)
+#else
+#define scrub_pages(_p, _n) ((void)0)
+#endif
+
+/* For setup_arch() in arch/ia64/kernel/setup.c */
+void xen_ia64_enable_opt_feature(void);
+
+#else /* CONFIG_XEN */
+
+#define xen_domain()		(0)
+#define xen_pv_domain()		(0)
+#define xen_initial_domain()	(0)
+#define xen_hvm_domain()	(0)
+#define is_running_on_xen()	(0)	/* deprecated. remove this */
+#endif
+
+#define is_initial_xendomain()	(0)	/* deprecated. remove this */
+
+#endif /* _ASM_IA64_XEN_HYPERVISOR_H */
diff --git a/arch/ia64/include/asm/xen/inst.h b/arch/ia64/include/asm/xen/inst.h
new file mode 100644
index 0000000..19c2ae1
--- /dev/null
+++ b/arch/ia64/include/asm/xen/inst.h
@@ -0,0 +1,458 @@
+/******************************************************************************
+ * arch/ia64/include/asm/xen/inst.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <asm/xen/privop.h>
+
+#define ia64_ivt				xen_ivt
+#define DO_SAVE_MIN				XEN_DO_SAVE_MIN
+
+#define __paravirt_switch_to			xen_switch_to
+#define __paravirt_leave_syscall		xen_leave_syscall
+#define __paravirt_work_processed_syscall	xen_work_processed_syscall
+#define __paravirt_leave_kernel			xen_leave_kernel
+#define __paravirt_pending_syscall_end		xen_work_pending_syscall_end
+#define __paravirt_work_processed_syscall_target \
+						xen_work_processed_syscall
+
+#define MOV_FROM_IFA(reg)	\
+	movl reg = XSI_IFA;	\
+	;;			\
+	ld8 reg = [reg]
+
+#define MOV_FROM_ITIR(reg)	\
+	movl reg = XSI_ITIR;	\
+	;;			\
+	ld8 reg = [reg]
+
+#define MOV_FROM_ISR(reg)	\
+	movl reg = XSI_ISR;	\
+	;;			\
+	ld8 reg = [reg]
+
+#define MOV_FROM_IHA(reg)	\
+	movl reg = XSI_IHA;	\
+	;;			\
+	ld8 reg = [reg]
+
+#define MOV_FROM_IPSR(pred, reg)	\
+(pred)	movl reg = XSI_IPSR;		\
+	;;				\
+(pred)	ld8 reg = [reg]
+
+#define MOV_FROM_IIM(reg)	\
+	movl reg = XSI_IIM;	\
+	;;			\
+	ld8 reg = [reg]
+
+#define MOV_FROM_IIP(reg)	\
+	movl reg = XSI_IIP;	\
+	;;			\
+	ld8 reg = [reg]
+
+.macro __MOV_FROM_IVR reg, clob
+	.ifc "\reg", "r8"
+		XEN_HYPER_GET_IVR
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		XEN_HYPER_GET_IVR
+		;;
+		mov \reg = r8
+		.exitm
+	.endif
+
+	mov \clob = r8
+	;;
+	XEN_HYPER_GET_IVR
+	;;
+	mov \reg = r8
+	;;
+	mov r8 = \clob
+.endm
+#define MOV_FROM_IVR(reg, clob)	__MOV_FROM_IVR reg, clob
+
+.macro __MOV_FROM_PSR pred, reg, clob
+	.ifc "\reg", "r8"
+		(\pred)	XEN_HYPER_GET_PSR;
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		(\pred)	XEN_HYPER_GET_PSR
+		;;
+		(\pred)	mov \reg = r8
+		.exitm
+	.endif
+
+	(\pred)	mov \clob = r8
+	(\pred)	XEN_HYPER_GET_PSR
+	;;
+	(\pred)	mov \reg = r8
+	(\pred)	mov r8 = \clob
+.endm
+#define MOV_FROM_PSR(pred, reg, clob)	__MOV_FROM_PSR pred, reg, clob
+
+
+#define MOV_TO_IFA(reg, clob)	\
+	movl clob = XSI_IFA;	\
+	;;			\
+	st8 [clob] = reg	\
+
+#define MOV_TO_ITIR(pred, reg, clob)	\
+(pred)	movl clob = XSI_ITIR;		\
+	;;				\
+(pred)	st8 [clob] = reg
+
+#define MOV_TO_IHA(pred, reg, clob)	\
+(pred)	movl clob = XSI_IHA;		\
+	;;				\
+(pred)	st8 [clob] = reg
+
+#define MOV_TO_IPSR(pred, reg, clob)	\
+(pred)	movl clob = XSI_IPSR;		\
+	;;				\
+(pred)	st8 [clob] = reg;		\
+	;;
+
+#define MOV_TO_IFS(pred, reg, clob)	\
+(pred)	movl clob = XSI_IFS;		\
+	;;				\
+(pred)	st8 [clob] = reg;		\
+	;;
+
+#define MOV_TO_IIP(reg, clob)	\
+	movl clob = XSI_IIP;	\
+	;;			\
+	st8 [clob] = reg
+
+.macro ____MOV_TO_KR kr, reg, clob0, clob1
+	.ifc "\clob0", "r9"
+		.error "clob0 \clob0 must not be r9"
+	.endif
+	.ifc "\clob1", "r8"
+		.error "clob1 \clob1 must not be r8"
+	.endif
+
+	.ifnc "\reg", "r9"
+		.ifnc "\clob1", "r9"
+			mov \clob1 = r9
+		.endif
+		mov r9 = \reg
+	.endif
+	.ifnc "\clob0", "r8"
+		mov \clob0 = r8
+	.endif
+	mov r8 = \kr
+	;;
+	XEN_HYPER_SET_KR
+
+	.ifnc "\reg", "r9"
+		.ifnc "\clob1", "r9"
+			mov r9 = \clob1
+		.endif
+	.endif
+	.ifnc "\clob0", "r8"
+		mov r8 = \clob0
+	.endif
+.endm
+
+.macro __MOV_TO_KR kr, reg, clob0, clob1
+	.ifc "\clob0", "r9"
+		____MOV_TO_KR \kr, \reg, \clob1, \clob0
+		.exitm
+	.endif
+	.ifc "\clob1", "r8"
+		____MOV_TO_KR \kr, \reg, \clob1, \clob0
+		.exitm
+	.endif
+
+	____MOV_TO_KR \kr, \reg, \clob0, \clob1
+.endm
+
+#define MOV_TO_KR(kr, reg, clob0, clob1) \
+	__MOV_TO_KR IA64_KR_ ## kr, reg, clob0, clob1
+
+
+.macro __ITC_I pred, reg, clob
+	.ifc "\reg", "r8"
+		(\pred)	XEN_HYPER_ITC_I
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		(\pred)	mov r8 = \reg
+		;;
+		(\pred)	XEN_HYPER_ITC_I
+		.exitm
+	.endif
+
+	(\pred)	mov \clob = r8
+	(\pred)	mov r8 = \reg
+	;;
+	(\pred)	XEN_HYPER_ITC_I
+	;;
+	(\pred)	mov r8 = \clob
+	;;
+.endm
+#define ITC_I(pred, reg, clob)	__ITC_I pred, reg, clob
+
+.macro __ITC_D pred, reg, clob
+	.ifc "\reg", "r8"
+		(\pred)	XEN_HYPER_ITC_D
+		;;
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		(\pred)	mov r8 = \reg
+		;;
+		(\pred)	XEN_HYPER_ITC_D
+		;;
+		.exitm
+	.endif
+
+	(\pred)	mov \clob = r8
+	(\pred)	mov r8 = \reg
+	;;
+	(\pred)	XEN_HYPER_ITC_D
+	;;
+	(\pred)	mov r8 = \clob
+	;;
+.endm
+#define ITC_D(pred, reg, clob)	__ITC_D pred, reg, clob
+
+.macro __ITC_I_AND_D pred_i, pred_d, reg, clob
+	.ifc "\reg", "r8"
+		(\pred_i)XEN_HYPER_ITC_I
+		;;
+		(\pred_d)XEN_HYPER_ITC_D
+		;;
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		mov r8 = \reg
+		;;
+		(\pred_i)XEN_HYPER_ITC_I
+		;;
+		(\pred_d)XEN_HYPER_ITC_D
+		;;
+		.exitm
+	.endif
+
+	mov \clob = r8
+	mov r8 = \reg
+	;;
+	(\pred_i)XEN_HYPER_ITC_I
+	;;
+	(\pred_d)XEN_HYPER_ITC_D
+	;;
+	mov r8 = \clob
+	;;
+.endm
+#define ITC_I_AND_D(pred_i, pred_d, reg, clob) \
+	__ITC_I_AND_D pred_i, pred_d, reg, clob
+
+.macro __THASH pred, reg0, reg1, clob
+	.ifc "\reg0", "r8"
+		(\pred)	mov r8 = \reg1
+		(\pred)	XEN_HYPER_THASH
+		.exitm
+	.endc
+	.ifc "\reg1", "r8"
+		(\pred)	XEN_HYPER_THASH
+		;;
+		(\pred)	mov \reg0 = r8
+		;;
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		(\pred)	mov r8 = \reg1
+		(\pred)	XEN_HYPER_THASH
+		;;
+		(\pred)	mov \reg0 = r8
+		;;
+		.exitm
+	.endif
+
+	(\pred)	mov \clob = r8
+	(\pred)	mov r8 = \reg1
+	(\pred)	XEN_HYPER_THASH
+	;;
+	(\pred)	mov \reg0 = r8
+	(\pred)	mov r8 = \clob
+	;;
+.endm
+#define THASH(pred, reg0, reg1, clob) __THASH pred, reg0, reg1, clob
+
+#define SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(clob0, clob1)	\
+	mov clob0 = 1;						\
+	movl clob1 = XSI_PSR_IC;				\
+	;;							\
+	st4 [clob1] = clob0					\
+	;;
+
+#define SSM_PSR_IC_AND_SRLZ_D(clob0, clob1)	\
+	;;					\
+	srlz.d;					\
+	mov clob1 = 1;				\
+	movl clob0 = XSI_PSR_IC;		\
+	;;					\
+	st4 [clob0] = clob1
+
+#define RSM_PSR_IC(clob)	\
+	movl clob = XSI_PSR_IC;	\
+	;;			\
+	st4 [clob] = r0;	\
+	;;
+
+/* pred will be clobbered */
+#define MASK_TO_PEND_OFS    (-1)
+#define SSM_PSR_I(pred, pred_clob, clob)				\
+(pred)	movl clob = XSI_PSR_I_ADDR					\
+	;;								\
+(pred)	ld8 clob = [clob]						\
+	;;								\
+	/* if (pred) vpsr.i = 1 */					\
+	/* if (pred) (vcpu->vcpu_info->evtchn_upcall_mask)=0 */		\
+(pred)	st1 [clob] = r0, MASK_TO_PEND_OFS				\
+	;;								\
+	/* if (vcpu->vcpu_info->evtchn_upcall_pending) */		\
+(pred)	ld1 clob = [clob]						\
+	;;								\
+(pred)	cmp.ne.unc pred_clob, p0 = clob, r0				\
+	;;								\
+(pred_clob)XEN_HYPER_SSM_I	/* do areal ssm psr.i */
+
+#define RSM_PSR_I(pred, clob0, clob1)	\
+	movl clob0 = XSI_PSR_I_ADDR;	\
+	mov clob1 = 1;			\
+	;;				\
+	ld8 clob0 = [clob0];		\
+	;;				\
+(pred)	st1 [clob0] = clob1
+
+#define RSM_PSR_I_IC(clob0, clob1, clob2)		\
+	movl clob0 = XSI_PSR_I_ADDR;			\
+	movl clob1 = XSI_PSR_IC;			\
+	;;						\
+	ld8 clob0 = [clob0];				\
+	mov clob2 = 1;					\
+	;;						\
+	/* note: clears both vpsr.i and vpsr.ic! */	\
+	st1 [clob0] = clob2;				\
+	st4 [clob1] = r0;				\
+	;;
+
+#define RSM_PSR_DT		\
+	XEN_HYPER_RSM_PSR_DT
+
+#define SSM_PSR_DT_AND_SRLZ_I	\
+	XEN_HYPER_SSM_PSR_DT
+
+#define BSW_0(clob0, clob1, clob2)			\
+	;;						\
+	/* r16-r31 all now hold bank1 values */		\
+	mov clob2 = ar.unat;				\
+	movl clob0 = XSI_BANK1_R16;			\
+	movl clob1 = XSI_BANK1_R16 + 8;			\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r16, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r17, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r18, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r19, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r20, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r21, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r22, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r23, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r24, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r25, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r26, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r27, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r28, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r29, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r30, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r31, 16;		\
+	;;						\
+	mov clob1 = ar.unat;				\
+	movl clob0 = XSI_B1NAT;				\
+	;;						\
+	st8 [clob0] = clob1;				\
+	mov ar.unat = clob2;				\
+	movl clob0 = XSI_BANKNUM;			\
+	;;						\
+	st4 [clob0] = r0
+
+
+	/* FIXME: THIS CODE IS NOT NaT SAFE! */
+#define XEN_BSW_1(clob)			\
+	mov clob = ar.unat;		\
+	movl r30 = XSI_B1NAT;		\
+	;;				\
+	ld8 r30 = [r30];		\
+	mov r31 = 1;			\
+	;;				\
+	mov ar.unat = r30;		\
+	movl r30 = XSI_BANKNUM;		\
+	;;				\
+	st4 [r30] = r31;		\
+	movl r30 = XSI_BANK1_R16;	\
+	movl r31 = XSI_BANK1_R16+8;	\
+	;;				\
+	ld8.fill r16 = [r30], 16;	\
+	ld8.fill r17 = [r31], 16;	\
+	;;				\
+	ld8.fill r18 = [r30], 16;	\
+	ld8.fill r19 = [r31], 16;	\
+	;;				\
+	ld8.fill r20 = [r30], 16;	\
+	ld8.fill r21 = [r31], 16;	\
+	;;				\
+	ld8.fill r22 = [r30], 16;	\
+	ld8.fill r23 = [r31], 16;	\
+	;;				\
+	ld8.fill r24 = [r30], 16;	\
+	ld8.fill r25 = [r31], 16;	\
+	;;				\
+	ld8.fill r26 = [r30], 16;	\
+	ld8.fill r27 = [r31], 16;	\
+	;;				\
+	ld8.fill r28 = [r30], 16;	\
+	ld8.fill r29 = [r31], 16;	\
+	;;				\
+	ld8.fill r30 = [r30];		\
+	ld8.fill r31 = [r31];		\
+	;;				\
+	mov ar.unat = clob
+
+#define BSW_1(clob0, clob1)	XEN_BSW_1(clob1)
+
+
+#define COVER	\
+	XEN_HYPER_COVER
+
+#define RFI			\
+	XEN_HYPER_RFI;		\
+	dv_serialize_data
diff --git a/arch/ia64/include/asm/xen/interface.h b/arch/ia64/include/asm/xen/interface.h
new file mode 100644
index 0000000..f00fab40
--- /dev/null
+++ b/arch/ia64/include/asm/xen/interface.h
@@ -0,0 +1,346 @@
+/******************************************************************************
+ * arch-ia64/hypervisor-if.h
+ *
+ * Guest OS interface to IA64 Xen.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright by those who contributed. (in alphabetical order)
+ *
+ * Anthony Xu <anthony.xu@intel.com>
+ * Eddie Dong <eddie.dong@intel.com>
+ * Fred Yang <fred.yang@intel.com>
+ * Kevin Tian <kevin.tian@intel.com>
+ * Alex Williamson <alex.williamson@hp.com>
+ * Chris Wright <chrisw@sous-sol.org>
+ * Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
+ * Dietmar Hahn <dietmar.hahn@fujitsu-siemens.com>
+ * Hollis Blanchard <hollisb@us.ibm.com>
+ * Isaku Yamahata <yamahata@valinux.co.jp>
+ * Jan Beulich <jbeulich@novell.com>
+ * John Levon <john.levon@sun.com>
+ * Kazuhiro Suzuki <kaz@jp.fujitsu.com>
+ * Keir Fraser <keir.fraser@citrix.com>
+ * Kouya Shimura <kouya@jp.fujitsu.com>
+ * Masaki Kanno <kanno.masaki@jp.fujitsu.com>
+ * Matt Chapman <matthewc@hp.com>
+ * Matthew Chapman <matthewc@hp.com>
+ * Samuel Thibault <samuel.thibault@eu.citrix.com>
+ * Tomonari Horikoshi <t.horikoshi@jp.fujitsu.com>
+ * Tristan Gingold <tgingold@free.fr>
+ * Tsunehisa Doi <Doi.Tsunehisa@jp.fujitsu.com>
+ * Yutaka Ezaki <yutaka.ezaki@jp.fujitsu.com>
+ * Zhang Xin <xing.z.zhang@intel.com>
+ * Zhang xiantao <xiantao.zhang@intel.com>
+ * dan.magenheimer@hp.com
+ * ian.pratt@cl.cam.ac.uk
+ * michael.fetterman@cl.cam.ac.uk
+ */
+
+#ifndef _ASM_IA64_XEN_INTERFACE_H
+#define _ASM_IA64_XEN_INTERFACE_H
+
+#define __DEFINE_GUEST_HANDLE(name, type)	\
+	typedef struct { type *p; } __guest_handle_ ## name
+
+#define DEFINE_GUEST_HANDLE_STRUCT(name)	\
+	__DEFINE_GUEST_HANDLE(name, struct name)
+#define DEFINE_GUEST_HANDLE(name)	__DEFINE_GUEST_HANDLE(name, name)
+#define GUEST_HANDLE(name)		__guest_handle_ ## name
+#define GUEST_HANDLE_64(name)		GUEST_HANDLE(name)
+#define set_xen_guest_handle(hnd, val)	do { (hnd).p = val; } while (0)
+
+#ifndef __ASSEMBLY__
+/* Guest handles for primitive C types. */
+__DEFINE_GUEST_HANDLE(uchar, unsigned char);
+__DEFINE_GUEST_HANDLE(uint, unsigned int);
+__DEFINE_GUEST_HANDLE(ulong, unsigned long);
+__DEFINE_GUEST_HANDLE(u64, unsigned long);
+DEFINE_GUEST_HANDLE(char);
+DEFINE_GUEST_HANDLE(int);
+DEFINE_GUEST_HANDLE(long);
+DEFINE_GUEST_HANDLE(void);
+
+typedef unsigned long xen_pfn_t;
+DEFINE_GUEST_HANDLE(xen_pfn_t);
+#define PRI_xen_pfn	"lx"
+#endif
+
+/* Arch specific VIRQs definition */
+#define VIRQ_ITC	VIRQ_ARCH_0	/* V. Virtual itc timer */
+#define VIRQ_MCA_CMC	VIRQ_ARCH_1	/* MCA cmc interrupt */
+#define VIRQ_MCA_CPE	VIRQ_ARCH_2	/* MCA cpe interrupt */
+
+/* Maximum number of virtual CPUs in multi-processor guests. */
+/* keep sizeof(struct shared_page) <= PAGE_SIZE.
+ * this is checked in arch/ia64/xen/hypervisor.c. */
+#define MAX_VIRT_CPUS	64
+
+#ifndef __ASSEMBLY__
+
+#define INVALID_MFN	(~0UL)
+
+union vac {
+	unsigned long value;
+	struct {
+		int a_int:1;
+		int a_from_int_cr:1;
+		int a_to_int_cr:1;
+		int a_from_psr:1;
+		int a_from_cpuid:1;
+		int a_cover:1;
+		int a_bsw:1;
+		long reserved:57;
+	};
+};
+
+union vdc {
+	unsigned long value;
+	struct {
+		int d_vmsw:1;
+		int d_extint:1;
+		int d_ibr_dbr:1;
+		int d_pmc:1;
+		int d_to_pmd:1;
+		int d_itm:1;
+		long reserved:58;
+	};
+};
+
+struct mapped_regs {
+	union vac vac;
+	union vdc vdc;
+	unsigned long virt_env_vaddr;
+	unsigned long reserved1[29];
+	unsigned long vhpi;
+	unsigned long reserved2[95];
+	union {
+		unsigned long vgr[16];
+		unsigned long bank1_regs[16];	/* bank1 regs (r16-r31)
+						   when bank0 active */
+	};
+	union {
+		unsigned long vbgr[16];
+		unsigned long bank0_regs[16];	/* bank0 regs (r16-r31)
+						   when bank1 active */
+	};
+	unsigned long vnat;
+	unsigned long vbnat;
+	unsigned long vcpuid[5];
+	unsigned long reserved3[11];
+	unsigned long vpsr;
+	unsigned long vpr;
+	unsigned long reserved4[76];
+	union {
+		unsigned long vcr[128];
+		struct {
+			unsigned long dcr;	/* CR0 */
+			unsigned long itm;
+			unsigned long iva;
+			unsigned long rsv1[5];
+			unsigned long pta;	/* CR8 */
+			unsigned long rsv2[7];
+			unsigned long ipsr;	/* CR16 */
+			unsigned long isr;
+			unsigned long rsv3;
+			unsigned long iip;
+			unsigned long ifa;
+			unsigned long itir;
+			unsigned long iipa;
+			unsigned long ifs;
+			unsigned long iim;	/* CR24 */
+			unsigned long iha;
+			unsigned long rsv4[38];
+			unsigned long lid;	/* CR64 */
+			unsigned long ivr;
+			unsigned long tpr;
+			unsigned long eoi;
+			unsigned long irr[4];
+			unsigned long itv;	/* CR72 */
+			unsigned long pmv;
+			unsigned long cmcv;
+			unsigned long rsv5[5];
+			unsigned long lrr0;	/* CR80 */
+			unsigned long lrr1;
+			unsigned long rsv6[46];
+		};
+	};
+	union {
+		unsigned long reserved5[128];
+		struct {
+			unsigned long precover_ifs;
+			unsigned long unat;	/* not sure if this is needed
+						   until NaT arch is done */
+			int interrupt_collection_enabled; /* virtual psr.ic */
+
+			/* virtual interrupt deliverable flag is
+			 * evtchn_upcall_mask in shared info area now.
+			 * interrupt_mask_addr is the address
+			 * of evtchn_upcall_mask for current vcpu
+			 */
+			unsigned char *interrupt_mask_addr;
+			int pending_interruption;
+			unsigned char vpsr_pp;
+			unsigned char vpsr_dfh;
+			unsigned char hpsr_dfh;
+			unsigned char hpsr_mfh;
+			unsigned long reserved5_1[4];
+			int metaphysical_mode;	/* 1 = use metaphys mapping
+						   0 = use virtual */
+			int banknum;		/* 0 or 1, which virtual
+						   register bank is active */
+			unsigned long rrs[8];	/* region registers */
+			unsigned long krs[8];	/* kernel registers */
+			unsigned long tmp[16];	/* temp registers
+						   (e.g. for hyperprivops) */
+		};
+	};
+};
+
+struct arch_vcpu_info {
+	/* nothing */
+};
+
+/*
+ * This structure is used for magic page in domain pseudo physical address
+ * space and the result of XENMEM_machine_memory_map.
+ * As the XENMEM_machine_memory_map result,
+ * xen_memory_map::nr_entries indicates the size in bytes
+ * including struct xen_ia64_memmap_info. Not the number of entries.
+ */
+struct xen_ia64_memmap_info {
+	uint64_t efi_memmap_size;	/* size of EFI memory map */
+	uint64_t efi_memdesc_size;	/* size of an EFI memory map
+					 * descriptor */
+	uint32_t efi_memdesc_version;	/* memory descriptor version */
+	void *memdesc[0];		/* array of efi_memory_desc_t */
+};
+
+struct arch_shared_info {
+	/* PFN of the start_info page.	*/
+	unsigned long start_info_pfn;
+
+	/* Interrupt vector for event channel.	*/
+	int evtchn_vector;
+
+	/* PFN of memmap_info page */
+	unsigned int memmap_info_num_pages;	/* currently only = 1 case is
+						   supported. */
+	unsigned long memmap_info_pfn;
+
+	uint64_t pad[31];
+};
+
+struct xen_callback {
+	unsigned long ip;
+};
+typedef struct xen_callback xen_callback_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/* Size of the shared_info area (this is not related to page size).  */
+#define XSI_SHIFT			14
+#define XSI_SIZE			(1 << XSI_SHIFT)
+/* Log size of mapped_regs area (64 KB - only 4KB is used).  */
+#define XMAPPEDREGS_SHIFT		12
+#define XMAPPEDREGS_SIZE		(1 << XMAPPEDREGS_SHIFT)
+/* Offset of XASI (Xen arch shared info) wrt XSI_BASE.	*/
+#define XMAPPEDREGS_OFS			XSI_SIZE
+
+/* Hyperprivops.  */
+#define HYPERPRIVOP_START		0x1
+#define HYPERPRIVOP_RFI			(HYPERPRIVOP_START + 0x0)
+#define HYPERPRIVOP_RSM_DT		(HYPERPRIVOP_START + 0x1)
+#define HYPERPRIVOP_SSM_DT		(HYPERPRIVOP_START + 0x2)
+#define HYPERPRIVOP_COVER		(HYPERPRIVOP_START + 0x3)
+#define HYPERPRIVOP_ITC_D		(HYPERPRIVOP_START + 0x4)
+#define HYPERPRIVOP_ITC_I		(HYPERPRIVOP_START + 0x5)
+#define HYPERPRIVOP_SSM_I		(HYPERPRIVOP_START + 0x6)
+#define HYPERPRIVOP_GET_IVR		(HYPERPRIVOP_START + 0x7)
+#define HYPERPRIVOP_GET_TPR		(HYPERPRIVOP_START + 0x8)
+#define HYPERPRIVOP_SET_TPR		(HYPERPRIVOP_START + 0x9)
+#define HYPERPRIVOP_EOI			(HYPERPRIVOP_START + 0xa)
+#define HYPERPRIVOP_SET_ITM		(HYPERPRIVOP_START + 0xb)
+#define HYPERPRIVOP_THASH		(HYPERPRIVOP_START + 0xc)
+#define HYPERPRIVOP_PTC_GA		(HYPERPRIVOP_START + 0xd)
+#define HYPERPRIVOP_ITR_D		(HYPERPRIVOP_START + 0xe)
+#define HYPERPRIVOP_GET_RR		(HYPERPRIVOP_START + 0xf)
+#define HYPERPRIVOP_SET_RR		(HYPERPRIVOP_START + 0x10)
+#define HYPERPRIVOP_SET_KR		(HYPERPRIVOP_START + 0x11)
+#define HYPERPRIVOP_FC			(HYPERPRIVOP_START + 0x12)
+#define HYPERPRIVOP_GET_CPUID		(HYPERPRIVOP_START + 0x13)
+#define HYPERPRIVOP_GET_PMD		(HYPERPRIVOP_START + 0x14)
+#define HYPERPRIVOP_GET_EFLAG		(HYPERPRIVOP_START + 0x15)
+#define HYPERPRIVOP_SET_EFLAG		(HYPERPRIVOP_START + 0x16)
+#define HYPERPRIVOP_RSM_BE		(HYPERPRIVOP_START + 0x17)
+#define HYPERPRIVOP_GET_PSR		(HYPERPRIVOP_START + 0x18)
+#define HYPERPRIVOP_SET_RR0_TO_RR4	(HYPERPRIVOP_START + 0x19)
+#define HYPERPRIVOP_MAX			(0x1a)
+
+/* Fast and light hypercalls.  */
+#define __HYPERVISOR_ia64_fast_eoi	__HYPERVISOR_arch_1
+
+/* Xencomm macros.  */
+#define XENCOMM_INLINE_MASK		0xf800000000000000UL
+#define XENCOMM_INLINE_FLAG		0x8000000000000000UL
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Optimization features.
+ * The hypervisor may do some special optimizations for guests. This hypercall
+ * can be used to switch on/of these special optimizations.
+ */
+#define __HYPERVISOR_opt_feature	0x700UL
+
+#define XEN_IA64_OPTF_OFF		0x0
+#define XEN_IA64_OPTF_ON		0x1
+
+/*
+ * If this feature is switched on, the hypervisor inserts the
+ * tlb entries without calling the guests traphandler.
+ * This is useful in guests using region 7 for identity mapping
+ * like the linux kernel does.
+ */
+#define XEN_IA64_OPTF_IDENT_MAP_REG7	1
+
+/* Identity mapping of region 4 addresses in HVM. */
+#define XEN_IA64_OPTF_IDENT_MAP_REG4	2
+
+/* Identity mapping of region 5 addresses in HVM. */
+#define XEN_IA64_OPTF_IDENT_MAP_REG5	3
+
+#define XEN_IA64_OPTF_IDENT_MAP_NOT_SET	 (0)
+
+struct xen_ia64_opt_feature {
+	unsigned long cmd;	/* Which feature */
+	unsigned char on;	/* Switch feature on/off */
+	union {
+		struct {
+			/* The page protection bit mask of the pte.
+			 * This will be or'ed with the pte. */
+			unsigned long pgprot;
+			unsigned long key;	/* A protection key for itir.*/
+		};
+	};
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_XEN_INTERFACE_H */
diff --git a/arch/ia64/include/asm/xen/irq.h b/arch/ia64/include/asm/xen/irq.h
new file mode 100644
index 0000000..a904509
--- /dev/null
+++ b/arch/ia64/include/asm/xen/irq.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+ * arch/ia64/include/asm/xen/irq.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ASM_IA64_XEN_IRQ_H
+#define _ASM_IA64_XEN_IRQ_H
+
+/*
+ * The flat IRQ space is divided into two regions:
+ *  1. A one-to-one mapping of real physical IRQs. This space is only used
+ *     if we have physical device-access privilege. This region is at the
+ *     start of the IRQ space so that existing device drivers do not need
+ *     to be modified to translate physical IRQ numbers into our IRQ space.
+ *  3. A dynamic mapping of inter-domain and Xen-sourced virtual IRQs. These
+ *     are bound using the provided bind/unbind functions.
+ */
+
+#define XEN_PIRQ_BASE		0
+#define XEN_NR_PIRQS		256
+
+#define XEN_DYNIRQ_BASE		(XEN_PIRQ_BASE + XEN_NR_PIRQS)
+#define XEN_NR_DYNIRQS		(NR_CPUS * 8)
+
+#define XEN_NR_IRQS		(XEN_NR_PIRQS + XEN_NR_DYNIRQS)
+
+#endif /* _ASM_IA64_XEN_IRQ_H */
diff --git a/arch/ia64/include/asm/xen/minstate.h b/arch/ia64/include/asm/xen/minstate.h
new file mode 100644
index 0000000..4d92d9b
--- /dev/null
+++ b/arch/ia64/include/asm/xen/minstate.h
@@ -0,0 +1,134 @@
+/*
+ * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
+ * the minimum state necessary that allows us to turn psr.ic back
+ * on.
+ *
+ * Assumed state upon entry:
+ *	psr.ic: off
+ *	r31:	contains saved predicates (pr)
+ *
+ * Upon exit, the state is as follows:
+ *	psr.ic: off
+ *	 r2 = points to &pt_regs.r16
+ *	 r8 = contents of ar.ccv
+ *	 r9 = contents of ar.csd
+ *	r10 = contents of ar.ssd
+ *	r11 = FPSR_DEFAULT
+ *	r12 = kernel sp (kernel virtual address)
+ *	r13 = points to current task_struct (kernel virtual address)
+ *	p15 = TRUE if psr.i is set in cr.ipsr
+ *	predicate registers (other than p2, p3, and p15), b6, r3, r14, r15:
+ *		preserved
+ * CONFIG_XEN note: p6/p7 are not preserved
+ *
+ * Note that psr.ic is NOT turned on by this macro.  This is so that
+ * we can pass interruption state as arguments to a handler.
+ */
+#define XEN_DO_SAVE_MIN(__COVER,SAVE_IFS,EXTRA,WORKAROUND)					\
+	mov r16=IA64_KR(CURRENT);	/* M */							\
+	mov r27=ar.rsc;			/* M */							\
+	mov r20=r1;			/* A */							\
+	mov r25=ar.unat;		/* M */							\
+	MOV_FROM_IPSR(p0,r29);		/* M */							\
+	MOV_FROM_IIP(r28);		/* M */							\
+	mov r21=ar.fpsr;		/* M */							\
+	mov r26=ar.pfs;			/* I */							\
+	__COVER;			/* B;; (or nothing) */					\
+	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16;						\
+	;;											\
+	ld1 r17=[r16];				/* load current->thread.on_ustack flag */	\
+	st1 [r16]=r0;				/* clear current->thread.on_ustack flag */	\
+	adds r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16						\
+	/* switch from user to kernel RBS: */							\
+	;;											\
+	invala;				/* M */							\
+	/* SAVE_IFS;*/ /* see xen special handling below */					\
+	cmp.eq pKStk,pUStk=r0,r17;		/* are we in kernel mode already? */		\
+	;;											\
+(pUStk)	mov ar.rsc=0;		/* set enforced lazy mode, pl 0, little-endian, loadrs=0 */	\
+	;;											\
+(pUStk)	mov.m r24=ar.rnat;									\
+(pUStk)	addl r22=IA64_RBS_OFFSET,r1;			/* compute base of RBS */		\
+(pKStk) mov r1=sp;					/* get sp  */				\
+	;;											\
+(pUStk) lfetch.fault.excl.nt1 [r22];								\
+(pUStk)	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1;	/* compute base of memory stack */	\
+(pUStk)	mov r23=ar.bspstore;				/* save ar.bspstore */			\
+	;;											\
+(pUStk)	mov ar.bspstore=r22;				/* switch to kernel RBS */		\
+(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1;			/* if in kernel mode, use sp (r12) */	\
+	;;											\
+(pUStk)	mov r18=ar.bsp;										\
+(pUStk)	mov ar.rsc=0x3;		/* set eager mode, pl 0, little-endian, loadrs=0 */		\
+	adds r17=2*L1_CACHE_BYTES,r1;		/* really: biggest cache-line size */		\
+	adds r16=PT(CR_IPSR),r1;								\
+	;;											\
+	lfetch.fault.excl.nt1 [r17],L1_CACHE_BYTES;						\
+	st8 [r16]=r29;		/* save cr.ipsr */						\
+	;;											\
+	lfetch.fault.excl.nt1 [r17];								\
+	tbit.nz p15,p0=r29,IA64_PSR_I_BIT;							\
+	mov r29=b0										\
+	;;											\
+	WORKAROUND;										\
+	adds r16=PT(R8),r1;	/* initialize first base pointer */				\
+	adds r17=PT(R9),r1;	/* initialize second base pointer */				\
+(pKStk)	mov r18=r0;		/* make sure r18 isn't NaT */					\
+	;;											\
+.mem.offset 0,0; st8.spill [r16]=r8,16;								\
+.mem.offset 8,0; st8.spill [r17]=r9,16;								\
+        ;;											\
+.mem.offset 0,0; st8.spill [r16]=r10,24;							\
+	movl r8=XSI_PRECOVER_IFS;								\
+.mem.offset 8,0; st8.spill [r17]=r11,24;							\
+        ;;											\
+	/* xen special handling for possibly lazy cover */					\
+	/* SAVE_MIN case in dispatch_ia32_handler: mov r30=r0 */				\
+	ld8 r30=[r8];										\
+(pUStk)	sub r18=r18,r22;	/* r18=RSE.ndirty*8 */						\
+	st8 [r16]=r28,16;	/* save cr.iip */						\
+	;;											\
+	st8 [r17]=r30,16;	/* save cr.ifs */						\
+	mov r8=ar.ccv;										\
+	mov r9=ar.csd;										\
+	mov r10=ar.ssd;										\
+	movl r11=FPSR_DEFAULT;   /* L-unit */							\
+	;;											\
+	st8 [r16]=r25,16;	/* save ar.unat */						\
+	st8 [r17]=r26,16;	/* save ar.pfs */						\
+	shl r18=r18,16;		/* compute ar.rsc to be used for "loadrs" */			\
+	;;											\
+	st8 [r16]=r27,16;	/* save ar.rsc */						\
+(pUStk)	st8 [r17]=r24,16;	/* save ar.rnat */						\
+(pKStk)	adds r17=16,r17;	/* skip over ar_rnat field */					\
+	;;			/* avoid RAW on r16 & r17 */					\
+(pUStk)	st8 [r16]=r23,16;	/* save ar.bspstore */						\
+	st8 [r17]=r31,16;	/* save predicates */						\
+(pKStk)	adds r16=16,r16;	/* skip over ar_bspstore field */				\
+	;;											\
+	st8 [r16]=r29,16;	/* save b0 */							\
+	st8 [r17]=r18,16;	/* save ar.rsc value for "loadrs" */				\
+	cmp.eq pNonSys,pSys=r0,r0	/* initialize pSys=0, pNonSys=1 */			\
+	;;											\
+.mem.offset 0,0; st8.spill [r16]=r20,16;	/* save original r1 */				\
+.mem.offset 8,0; st8.spill [r17]=r12,16;							\
+	adds r12=-16,r1;	/* switch to kernel memory stack (with 16 bytes of scratch) */	\
+	;;											\
+.mem.offset 0,0; st8.spill [r16]=r13,16;							\
+.mem.offset 8,0; st8.spill [r17]=r21,16;	/* save ar.fpsr */				\
+	mov r13=IA64_KR(CURRENT);	/* establish `current' */				\
+	;;											\
+.mem.offset 0,0; st8.spill [r16]=r15,16;							\
+.mem.offset 8,0; st8.spill [r17]=r14,16;							\
+	;;											\
+.mem.offset 0,0; st8.spill [r16]=r2,16;								\
+.mem.offset 8,0; st8.spill [r17]=r3,16;								\
+	ACCOUNT_GET_STAMP									\
+	adds r2=IA64_PT_REGS_R16_OFFSET,r1;							\
+	;;											\
+	EXTRA;											\
+	movl r1=__gp;		/* establish kernel global pointer */				\
+	;;											\
+	ACCOUNT_SYS_ENTER									\
+	BSW_1(r3,r14);	/* switch back to bank 1 (must be last in insn group) */		\
+	;;
diff --git a/arch/ia64/include/asm/xen/page.h b/arch/ia64/include/asm/xen/page.h
new file mode 100644
index 0000000..03441a78
--- /dev/null
+++ b/arch/ia64/include/asm/xen/page.h
@@ -0,0 +1,65 @@
+/******************************************************************************
+ * arch/ia64/include/asm/xen/page.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ASM_IA64_XEN_PAGE_H
+#define _ASM_IA64_XEN_PAGE_H
+
+#define INVALID_P2M_ENTRY	(~0UL)
+
+static inline unsigned long mfn_to_pfn(unsigned long mfn)
+{
+	return mfn;
+}
+
+static inline unsigned long pfn_to_mfn(unsigned long pfn)
+{
+	return pfn;
+}
+
+#define phys_to_machine_mapping_valid(_x)	(1)
+
+static inline void *mfn_to_virt(unsigned long mfn)
+{
+	return __va(mfn << PAGE_SHIFT);
+}
+
+static inline unsigned long virt_to_mfn(void *virt)
+{
+	return __pa(virt) >> PAGE_SHIFT;
+}
+
+/* for tpmfront.c */
+static inline unsigned long virt_to_machine(void *virt)
+{
+	return __pa(virt);
+}
+
+static inline void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	/* nothing */
+}
+
+#define pte_mfn(_x)	pte_pfn(_x)
+#define mfn_pte(_x, _y)	__pte_ma(0)		/* unmodified use */
+#define __pte_ma(_x)	((pte_t) {(_x)})        /* unmodified use */
+
+#endif /* _ASM_IA64_XEN_PAGE_H */
diff --git a/arch/ia64/include/asm/xen/privop.h b/arch/ia64/include/asm/xen/privop.h
new file mode 100644
index 0000000..71ec754
--- /dev/null
+++ b/arch/ia64/include/asm/xen/privop.h
@@ -0,0 +1,129 @@
+#ifndef _ASM_IA64_XEN_PRIVOP_H
+#define _ASM_IA64_XEN_PRIVOP_H
+
+/*
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *	Dan Magenheimer <dan.magenheimer@hp.com>
+ *
+ * Paravirtualizations of privileged operations for Xen/ia64
+ *
+ *
+ * inline privop and paravirt_alt support
+ * Copyright (c) 2007 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>		/* arch-ia64.h requires uint64_t */
+#endif
+#include <asm/xen/interface.h>
+
+/* At 1 MB, before per-cpu space but still addressable using addl instead
+   of movl. */
+#define XSI_BASE			0xfffffffffff00000
+
+/* Address of mapped regs.  */
+#define XMAPPEDREGS_BASE		(XSI_BASE + XSI_SIZE)
+
+#ifdef __ASSEMBLY__
+#define XEN_HYPER_RFI			break HYPERPRIVOP_RFI
+#define XEN_HYPER_RSM_PSR_DT		break HYPERPRIVOP_RSM_DT
+#define XEN_HYPER_SSM_PSR_DT		break HYPERPRIVOP_SSM_DT
+#define XEN_HYPER_COVER			break HYPERPRIVOP_COVER
+#define XEN_HYPER_ITC_D			break HYPERPRIVOP_ITC_D
+#define XEN_HYPER_ITC_I			break HYPERPRIVOP_ITC_I
+#define XEN_HYPER_SSM_I			break HYPERPRIVOP_SSM_I
+#define XEN_HYPER_GET_IVR		break HYPERPRIVOP_GET_IVR
+#define XEN_HYPER_THASH			break HYPERPRIVOP_THASH
+#define XEN_HYPER_ITR_D			break HYPERPRIVOP_ITR_D
+#define XEN_HYPER_SET_KR		break HYPERPRIVOP_SET_KR
+#define XEN_HYPER_GET_PSR		break HYPERPRIVOP_GET_PSR
+#define XEN_HYPER_SET_RR0_TO_RR4	break HYPERPRIVOP_SET_RR0_TO_RR4
+
+#define XSI_IFS				(XSI_BASE + XSI_IFS_OFS)
+#define XSI_PRECOVER_IFS		(XSI_BASE + XSI_PRECOVER_IFS_OFS)
+#define XSI_IFA				(XSI_BASE + XSI_IFA_OFS)
+#define XSI_ISR				(XSI_BASE + XSI_ISR_OFS)
+#define XSI_IIM				(XSI_BASE + XSI_IIM_OFS)
+#define XSI_ITIR			(XSI_BASE + XSI_ITIR_OFS)
+#define XSI_PSR_I_ADDR			(XSI_BASE + XSI_PSR_I_ADDR_OFS)
+#define XSI_PSR_IC			(XSI_BASE + XSI_PSR_IC_OFS)
+#define XSI_IPSR			(XSI_BASE + XSI_IPSR_OFS)
+#define XSI_IIP				(XSI_BASE + XSI_IIP_OFS)
+#define XSI_B1NAT			(XSI_BASE + XSI_B1NATS_OFS)
+#define XSI_BANK1_R16			(XSI_BASE + XSI_BANK1_R16_OFS)
+#define XSI_BANKNUM			(XSI_BASE + XSI_BANKNUM_OFS)
+#define XSI_IHA				(XSI_BASE + XSI_IHA_OFS)
+#endif
+
+#ifndef __ASSEMBLY__
+
+/************************************************/
+/* Instructions paravirtualized for correctness */
+/************************************************/
+
+/* "fc" and "thash" are privilege-sensitive instructions, meaning they
+ *  may have different semantics depending on whether they are executed
+ *  at PL0 vs PL!=0.  When paravirtualized, these instructions mustn't
+ *  be allowed to execute directly, lest incorrect semantics result. */
+extern void xen_fc(unsigned long addr);
+extern unsigned long xen_thash(unsigned long addr);
+
+/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag"
+ * is not currently used (though it may be in a long-format VHPT system!)
+ * and the semantics of cover only change if psr.ic is off which is very
+ * rare (and currently non-existent outside of assembly code */
+
+/* There are also privilege-sensitive registers.  These registers are
+ * readable at any privilege level but only writable at PL0. */
+extern unsigned long xen_get_cpuid(int index);
+extern unsigned long xen_get_pmd(int index);
+
+extern unsigned long xen_get_eflag(void);	/* see xen_ia64_getreg */
+extern void xen_set_eflag(unsigned long);	/* see xen_ia64_setreg */
+
+/************************************************/
+/* Instructions paravirtualized for performance */
+/************************************************/
+
+/* Xen uses memory-mapped virtual privileged registers for access to many
+ * performance-sensitive privileged registers.  Some, like the processor
+ * status register (psr), are broken up into multiple memory locations.
+ * Others, like "pend", are abstractions based on privileged registers.
+ * "Pend" is guaranteed to be set if reading cr.ivr would return a
+ * (non-spurious) interrupt. */
+#define XEN_MAPPEDREGS ((struct mapped_regs *)XMAPPEDREGS_BASE)
+
+#define XSI_PSR_I			\
+	(*XEN_MAPPEDREGS->interrupt_mask_addr)
+#define xen_get_virtual_psr_i()		\
+	(!XSI_PSR_I)
+#define xen_set_virtual_psr_i(_val)	\
+	({ XSI_PSR_I = (uint8_t)(_val) ? 0 : 1; })
+#define xen_set_virtual_psr_ic(_val)	\
+	({ XEN_MAPPEDREGS->interrupt_collection_enabled = _val ? 1 : 0; })
+#define xen_get_virtual_pend()		\
+	(*(((uint8_t *)XEN_MAPPEDREGS->interrupt_mask_addr) - 1))
+
+/* Although all privileged operations can be left to trap and will
+ * be properly handled by Xen, some are frequent enough that we use
+ * hyperprivops for performance. */
+extern unsigned long xen_get_psr(void);
+extern unsigned long xen_get_ivr(void);
+extern unsigned long xen_get_tpr(void);
+extern void xen_hyper_ssm_i(void);
+extern void xen_set_itm(unsigned long);
+extern void xen_set_tpr(unsigned long);
+extern void xen_eoi(unsigned long);
+extern unsigned long xen_get_rr(unsigned long index);
+extern void xen_set_rr(unsigned long index, unsigned long val);
+extern void xen_set_rr0_to_rr4(unsigned long val0, unsigned long val1,
+			       unsigned long val2, unsigned long val3,
+			       unsigned long val4);
+extern void xen_set_kr(unsigned long index, unsigned long val);
+extern void xen_ptcga(unsigned long addr, unsigned long size);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_XEN_PRIVOP_H */
diff --git a/arch/ia64/include/asm/xen/xcom_hcall.h b/arch/ia64/include/asm/xen/xcom_hcall.h
new file mode 100644
index 0000000..20b2950
--- /dev/null
+++ b/arch/ia64/include/asm/xen/xcom_hcall.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2006 Tristan Gingold <tristan.gingold@bull.net>, Bull SAS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_IA64_XEN_XCOM_HCALL_H
+#define _ASM_IA64_XEN_XCOM_HCALL_H
+
+/* These function creates inline or mini descriptor for the parameters and
+   calls the corresponding xencomm_arch_hypercall_X.
+   Architectures should defines HYPERVISOR_xxx as xencomm_hypercall_xxx unless
+   they want to use their own wrapper.  */
+extern int xencomm_hypercall_console_io(int cmd, int count, char *str);
+
+extern int xencomm_hypercall_event_channel_op(int cmd, void *op);
+
+extern int xencomm_hypercall_xen_version(int cmd, void *arg);
+
+extern int xencomm_hypercall_physdev_op(int cmd, void *op);
+
+extern int xencomm_hypercall_grant_table_op(unsigned int cmd, void *op,
+					    unsigned int count);
+
+extern int xencomm_hypercall_sched_op(int cmd, void *arg);
+
+extern int xencomm_hypercall_multicall(void *call_list, int nr_calls);
+
+extern int xencomm_hypercall_callback_op(int cmd, void *arg);
+
+extern int xencomm_hypercall_memory_op(unsigned int cmd, void *arg);
+
+extern int xencomm_hypercall_suspend(unsigned long srec);
+
+extern long xencomm_hypercall_vcpu_op(int cmd, int cpu, void *arg);
+
+extern long xencomm_hypercall_opt_feature(void *arg);
+
+#endif /* _ASM_IA64_XEN_XCOM_HCALL_H */
diff --git a/arch/ia64/include/asm/xen/xencomm.h b/arch/ia64/include/asm/xen/xencomm.h
new file mode 100644
index 0000000..cded677
--- /dev/null
+++ b/arch/ia64/include/asm/xen/xencomm.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2006 Hollis Blanchard <hollisb@us.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_IA64_XEN_XENCOMM_H
+#define _ASM_IA64_XEN_XENCOMM_H
+
+#include <xen/xencomm.h>
+#include <asm/pgtable.h>
+
+/* Must be called before any hypercall.  */
+extern void xencomm_initialize(void);
+extern int xencomm_is_initialized(void);
+
+/* Check if virtual contiguity means physical contiguity
+ * where the passed address is a pointer value in virtual address.
+ * On ia64, identity mapping area in region 7 or the piece of region 5
+ * that is mapped by itr[IA64_TR_KERNEL]/dtr[IA64_TR_KERNEL]
+ */
+static inline int xencomm_is_phys_contiguous(unsigned long addr)
+{
+	return (PAGE_OFFSET <= addr &&
+		addr < (PAGE_OFFSET + (1UL << IA64_MAX_PHYS_BITS))) ||
+		(KERNEL_START <= addr &&
+		 addr < KERNEL_START + KERNEL_TR_PAGE_SIZE);
+}
+
+#endif /* _ASM_IA64_XEN_XENCOMM_H */
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 87fea11..c381ea9 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -42,6 +42,10 @@ obj-$(CONFIG_IA64_ESI)		+= esi.o
 ifneq ($(CONFIG_IA64_ESI),)
 obj-y				+= esi_stub.o	# must be in kernel proper
 endif
+obj-$(CONFIG_DMAR)		+= pci-dma.o
+ifeq ($(CONFIG_DMAR), y)
+obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb.o
+endif
 
 # The gate DSO image is built using a special linker script.
 targets += gate.so gate-syms.o
@@ -112,5 +116,23 @@ clean-files += $(objtree)/include/asm-ia64/nr-irqs.h
 ASM_PARAVIRT_OBJS = ivt.o entry.o
 define paravirtualized_native
 AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_NATIVE
+AFLAGS_pvchk-sed-$(1) += -D__IA64_ASM_PARAVIRTUALIZED_PVCHECK
+extra-y += pvchk-$(1)
 endef
 $(foreach obj,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_native,$(obj))))
+
+#
+# Checker for paravirtualizations of privileged operations.
+#
+quiet_cmd_pv_check_sed = PVCHK   $@
+define cmd_pv_check_sed
+	sed -f $(srctree)/arch/$(SRCARCH)/scripts/pvcheck.sed $< > $@
+endef
+
+$(obj)/pvchk-sed-%.s: $(src)/%.S $(srctree)/arch/$(SRCARCH)/scripts/pvcheck.sed FORCE
+	$(call if_changed_dep,as_s_S)
+$(obj)/pvchk-%.s: $(obj)/pvchk-sed-%.s FORCE
+	$(call if_changed,pv_check_sed)
+$(obj)/pvchk-%.o: $(obj)/pvchk-%.s FORCE
+	$(call if_changed,as_o_S)
+.PRECIOUS: $(obj)/pvchk-sed-%.s $(obj)/pvchk-%.s $(obj)/pvchk-%.o
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 5d1eb7e..0635015 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -52,6 +52,7 @@
 #include <asm/numa.h>
 #include <asm/sal.h>
 #include <asm/cyclone.h>
+#include <asm/xen/hypervisor.h>
 
 #define BAD_MADT_ENTRY(entry, end) (                                        \
 		(!entry) || (unsigned long)entry + sizeof(*entry) > end ||  \
@@ -91,6 +92,9 @@ acpi_get_sysname(void)
 	struct acpi_table_rsdp *rsdp;
 	struct acpi_table_xsdt *xsdt;
 	struct acpi_table_header *hdr;
+#ifdef CONFIG_DMAR
+	u64 i, nentries;
+#endif
 
 	rsdp_phys = acpi_find_rsdp();
 	if (!rsdp_phys) {
@@ -121,7 +125,21 @@ acpi_get_sysname(void)
 			return "uv";
 		else
 			return "sn2";
+	} else if (xen_pv_domain() && !strcmp(hdr->oem_id, "XEN")) {
+		return "xen";
+	}
+
+#ifdef CONFIG_DMAR
+	/* Look for Intel IOMMU */
+	nentries = (hdr->length - sizeof(*hdr)) /
+			 sizeof(xsdt->table_offset_entry[0]);
+	for (i = 0; i < nentries; i++) {
+		hdr = __va(xsdt->table_offset_entry[i]);
+		if (strncmp(hdr->signature, ACPI_SIG_DMAR,
+			sizeof(ACPI_SIG_DMAR) - 1) == 0)
+			return "dig_vtd";
 	}
+#endif
 
 	return "dig";
 #else
@@ -137,6 +155,10 @@ acpi_get_sysname(void)
 	return "uv";
 # elif defined (CONFIG_IA64_DIG)
 	return "dig";
+# elif defined (CONFIG_IA64_XEN_GUEST)
+	return "xen";
+# elif defined(CONFIG_IA64_DIG_VTD)
+	return "dig_vtd";
 # else
 #	error Unknown platform.  Fix acpi.c.
 # endif
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index 94c44b1..742dbb1 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -16,6 +16,9 @@
 #include <asm/sigcontext.h>
 #include <asm/mca.h>
 
+#include <asm/xen/interface.h>
+#include <asm/xen/hypervisor.h>
+
 #include "../kernel/sigframe.h"
 #include "../kernel/fsyscall_gtod_data.h"
 
@@ -286,4 +289,32 @@ void foo(void)
 		offsetof (struct itc_jitter_data_t, itc_jitter));
 	DEFINE(IA64_ITC_LASTCYCLE_OFFSET,
 		offsetof (struct itc_jitter_data_t, itc_lastcycle));
+
+#ifdef CONFIG_XEN
+	BLANK();
+
+	DEFINE(XEN_NATIVE_ASM, XEN_NATIVE);
+	DEFINE(XEN_PV_DOMAIN_ASM, XEN_PV_DOMAIN);
+
+#define DEFINE_MAPPED_REG_OFS(sym, field) \
+	DEFINE(sym, (XMAPPEDREGS_OFS + offsetof(struct mapped_regs, field)))
+
+	DEFINE_MAPPED_REG_OFS(XSI_PSR_I_ADDR_OFS, interrupt_mask_addr);
+	DEFINE_MAPPED_REG_OFS(XSI_IPSR_OFS, ipsr);
+	DEFINE_MAPPED_REG_OFS(XSI_IIP_OFS, iip);
+	DEFINE_MAPPED_REG_OFS(XSI_IFS_OFS, ifs);
+	DEFINE_MAPPED_REG_OFS(XSI_PRECOVER_IFS_OFS, precover_ifs);
+	DEFINE_MAPPED_REG_OFS(XSI_ISR_OFS, isr);
+	DEFINE_MAPPED_REG_OFS(XSI_IFA_OFS, ifa);
+	DEFINE_MAPPED_REG_OFS(XSI_IIPA_OFS, iipa);
+	DEFINE_MAPPED_REG_OFS(XSI_IIM_OFS, iim);
+	DEFINE_MAPPED_REG_OFS(XSI_IHA_OFS, iha);
+	DEFINE_MAPPED_REG_OFS(XSI_ITIR_OFS, itir);
+	DEFINE_MAPPED_REG_OFS(XSI_PSR_IC_OFS, interrupt_collection_enabled);
+	DEFINE_MAPPED_REG_OFS(XSI_BANKNUM_OFS, banknum);
+	DEFINE_MAPPED_REG_OFS(XSI_BANK0_R16_OFS, bank0_regs[0]);
+	DEFINE_MAPPED_REG_OFS(XSI_BANK1_R16_OFS, bank1_regs[0]);
+	DEFINE_MAPPED_REG_OFS(XSI_B0NATS_OFS, vbnat);
+	DEFINE_MAPPED_REG_OFS(XSI_B1NATS_OFS, vnat);
+#endif /* CONFIG_XEN */
 }
diff --git a/arch/ia64/kernel/crash_dump.c b/arch/ia64/kernel/crash_dump.c
index da60e90..23e9129 100644
--- a/arch/ia64/kernel/crash_dump.c
+++ b/arch/ia64/kernel/crash_dump.c
@@ -8,10 +8,14 @@
 
 #include <linux/errno.h>
 #include <linux/types.h>
+#include <linux/crash_dump.h>
 
 #include <asm/page.h>
 #include <asm/uaccess.h>
 
+/* Stores the physical address of elf header of crash image. */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+
 /**
  * copy_oldmem_page - copy one page from "oldmem"
  * @pfn: page frame number to be copied
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index d45f215..efaff15 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -1232,9 +1232,10 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 				if (md->attribute & EFI_MEMORY_WP) {
 					name = "System ROM";
 					flags |= IORESOURCE_READONLY;
-				} else {
+				} else if (md->attribute == EFI_MEMORY_UC)
+					name = "Uncached RAM";
+				else
 					name = "System RAM";
-				}
 				break;
 
 			case EFI_ACPI_MEMORY_NVS:
@@ -1334,7 +1335,7 @@ kdump_find_rsvd_region (unsigned long size, struct rsvd_region *r, int n)
 }
 #endif
 
-#ifdef CONFIG_PROC_VMCORE
+#ifdef CONFIG_CRASH_DUMP
 /* locate the size find a the descriptor at a certain address */
 unsigned long __init
 vmcore_find_descriptor_size (unsigned long address)
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 0dd6c14..7ef0c59 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -534,6 +534,11 @@ GLOBAL_ENTRY(ia64_trace_syscall)
  	stf.spill [r16]=f10
  	stf.spill [r17]=f11
 	br.call.sptk.many rp=syscall_trace_enter // give parent a chance to catch syscall args
+	cmp.lt p6,p0=r8,r0			// check tracehook
+	adds r2=PT(R8)+16,sp			// r2 = &pt_regs.r8
+	adds r3=PT(R10)+16,sp			// r3 = &pt_regs.r10
+	mov r10=0
+(p6)	br.cond.sptk strace_error		// syscall failed ->
 	adds r16=PT(F6)+16,sp
 	adds r17=PT(F7)+16,sp
 	;;
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 8bdea8e..66e491d 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -367,16 +367,17 @@ start_ap:
 	;;
 #else
 (isAP)	br.few 2f
-	mov r20=r19
-	sub r19=r19,r18
+	movl r20=__cpu0_per_cpu
 	;;
 	shr.u r18=r18,3
 1:
-	ld8 r21=[r20],8;;
-	st8[r19]=r21,8
+	ld8 r21=[r19],8;;
+	st8[r20]=r21,8
 	adds r18=-1,r18;;
 	cmp4.lt p7,p6=0,r18
 (p7)	br.cond.dptk.few 1b
+	mov r19=r20
+	;;
 2:
 #endif
 	tpa r19=r19
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 416a952..f675d8e3 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -580,7 +580,7 @@ ENTRY(dirty_bit)
 	mov b0=r29				// restore b0
 	;;
 	st8 [r17]=r18				// store back updated PTE
-	itc.d r18				// install updated PTE
+	ITC_D(p0, r18, r16)			// install updated PTE
 #endif
 	mov pr=r31,-1				// restore pr
 	RFI
@@ -646,7 +646,7 @@ ENTRY(iaccess_bit)
 	mov b0=r29				// restore b0
 	;;
 	st8 [r17]=r18				// store back updated PTE
-	itc.i r18				// install updated PTE
+	ITC_I(p0, r18, r16)			// install updated PTE
 #endif /* !CONFIG_SMP */
 	mov pr=r31,-1
 	RFI
@@ -698,7 +698,7 @@ ENTRY(daccess_bit)
 	or r18=_PAGE_A,r18			// set the accessed bit
 	;;
 	st8 [r17]=r18				// store back updated PTE
-	itc.d r18				// install updated PTE
+	ITC_D(p0, r18, r16)			// install updated PTE
 #endif
 	mov b0=r29				// restore b0
 	mov pr=r31,-1
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 60c6ef6..702a09c 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -5,6 +5,7 @@
 #include <linux/pci.h>
 #include <linux/irq.h>
 #include <linux/msi.h>
+#include <linux/dmar.h>
 #include <asm/smp.h>
 
 /*
@@ -162,3 +163,82 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 	return ia64_teardown_msi_irq(irq);
 }
+
+#ifdef CONFIG_DMAR
+#ifdef CONFIG_SMP
+static void dmar_msi_set_affinity(unsigned int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg = irq_cfg + irq;
+	struct msi_msg msg;
+	int cpu = first_cpu(mask);
+
+
+	if (!cpu_online(cpu))
+		return;
+
+	if (irq_prepare_move(irq, cpu))
+		return;
+
+	dmar_msi_read(irq, &msg);
+
+	msg.data &= ~MSI_DATA_VECTOR_MASK;
+	msg.data |= MSI_DATA_VECTOR(cfg->vector);
+	msg.address_lo &= ~MSI_ADDR_DESTID_MASK;
+	msg.address_lo |= MSI_ADDR_DESTID_CPU(cpu_physical_id(cpu));
+
+	dmar_msi_write(irq, &msg);
+	irq_desc[irq].affinity = mask;
+}
+#endif /* CONFIG_SMP */
+
+struct irq_chip dmar_msi_type = {
+	.name = "DMAR_MSI",
+	.unmask = dmar_msi_unmask,
+	.mask = dmar_msi_mask,
+	.ack = ia64_ack_msi_irq,
+#ifdef CONFIG_SMP
+	.set_affinity = dmar_msi_set_affinity,
+#endif
+	.retrigger = ia64_msi_retrigger_irq,
+};
+
+static int
+msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
+{
+	struct irq_cfg *cfg = irq_cfg + irq;
+	unsigned dest;
+	cpumask_t mask;
+
+	cpus_and(mask, irq_to_domain(irq), cpu_online_map);
+	dest = cpu_physical_id(first_cpu(mask));
+
+	msg->address_hi = 0;
+	msg->address_lo =
+		MSI_ADDR_HEADER |
+		MSI_ADDR_DESTMODE_PHYS |
+		MSI_ADDR_REDIRECTION_CPU |
+		MSI_ADDR_DESTID_CPU(dest);
+
+	msg->data =
+		MSI_DATA_TRIGGER_EDGE |
+		MSI_DATA_LEVEL_ASSERT |
+		MSI_DATA_DELIVERY_FIXED |
+		MSI_DATA_VECTOR(cfg->vector);
+	return 0;
+}
+
+int arch_setup_dmar_msi(unsigned int irq)
+{
+	int ret;
+	struct msi_msg msg;
+
+	ret = msi_compose_msg(NULL, irq, &msg);
+	if (ret < 0)
+		return ret;
+	dmar_msi_write(irq, &msg);
+	set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
+		"edge");
+	return 0;
+}
+#endif /* CONFIG_DMAR */
+
diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c
index 8273afc..ee56457 100644
--- a/arch/ia64/kernel/nr-irqs.c
+++ b/arch/ia64/kernel/nr-irqs.c
@@ -10,6 +10,7 @@
 #include <linux/kbuild.h>
 #include <linux/threads.h>
 #include <asm/native/irq.h>
+#include <asm/xen/irq.h>
 
 void foo(void)
 {
diff --git a/arch/ia64/kernel/paravirt.c b/arch/ia64/kernel/paravirt.c
index afaf5b9..de35d8e 100644
--- a/arch/ia64/kernel/paravirt.c
+++ b/arch/ia64/kernel/paravirt.c
@@ -332,7 +332,7 @@ ia64_native_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
 
 struct pv_iosapic_ops pv_iosapic_ops = {
 	.pcat_compat_init = ia64_native_iosapic_pcat_compat_init,
-	.get_irq_chip = ia64_native_iosapic_get_irq_chip,
+	.__get_irq_chip = ia64_native_iosapic_get_irq_chip,
 
 	.__read = ia64_native_iosapic_read,
 	.__write = ia64_native_iosapic_write,
diff --git a/arch/ia64/kernel/paravirt_inst.h b/arch/ia64/kernel/paravirt_inst.h
index 5cad6fb..64d6d81 100644
--- a/arch/ia64/kernel/paravirt_inst.h
+++ b/arch/ia64/kernel/paravirt_inst.h
@@ -20,7 +20,9 @@
  *
  */
 
-#ifdef __IA64_ASM_PARAVIRTUALIZED_XEN
+#ifdef __IA64_ASM_PARAVIRTUALIZED_PVCHECK
+#include <asm/native/pvchk_inst.h>
+#elif defined(__IA64_ASM_PARAVIRTUALIZED_XEN)
 #include <asm/xen/inst.h>
 #include <asm/xen/minstate.h>
 #else
diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c
new file mode 100644
index 0000000..10a75b5
--- /dev/null
+++ b/arch/ia64/kernel/pci-dma.c
@@ -0,0 +1,129 @@
+/*
+ * Dynamic DMA mapping support.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/dmar.h>
+#include <asm/iommu.h>
+#include <asm/machvec.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/machvec.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_DMAR
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+#include <asm/page.h>
+#include <asm/iommu.h>
+
+dma_addr_t bad_dma_address __read_mostly;
+EXPORT_SYMBOL(bad_dma_address);
+
+static int iommu_sac_force __read_mostly;
+
+int no_iommu __read_mostly;
+#ifdef CONFIG_IOMMU_DEBUG
+int force_iommu __read_mostly = 1;
+#else
+int force_iommu __read_mostly;
+#endif
+
+/* Set this to 1 if there is a HW IOMMU in the system */
+int iommu_detected __read_mostly;
+
+/* Dummy device used for NULL arguments (normally ISA). Better would
+   be probably a smaller DMA mask, but this is bug-to-bug compatible
+   to i386. */
+struct device fallback_dev = {
+	.bus_id = "fallback device",
+	.coherent_dma_mask = DMA_32BIT_MASK,
+	.dma_mask = &fallback_dev.coherent_dma_mask,
+};
+
+void __init pci_iommu_alloc(void)
+{
+	/*
+	 * The order of these functions is important for
+	 * fall-back/fail-over reasons
+	 */
+	detect_intel_iommu();
+
+#ifdef CONFIG_SWIOTLB
+	pci_swiotlb_init();
+#endif
+}
+
+static int __init pci_iommu_init(void)
+{
+	if (iommu_detected)
+		intel_iommu_init();
+
+	return 0;
+}
+
+/* Must execute after PCI subsystem */
+fs_initcall(pci_iommu_init);
+
+void pci_iommu_shutdown(void)
+{
+	return;
+}
+
+void __init
+iommu_dma_init(void)
+{
+	return;
+}
+
+struct dma_mapping_ops *dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
+int iommu_dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+#ifdef CONFIG_PCI
+	if (mask > 0xffffffff && forbid_dac > 0) {
+		dev_info(dev, "Disallowing DAC for device\n");
+		return 0;
+	}
+#endif
+
+	if (ops->dma_supported_op)
+		return ops->dma_supported_op(dev, mask);
+
+	/* Copied from i386. Doesn't make much sense, because it will
+	   only work for pci_alloc_coherent.
+	   The caller just has to use GFP_DMA in this case. */
+	if (mask < DMA_24BIT_MASK)
+		return 0;
+
+	/* Tell the device to use SAC when IOMMU force is on.  This
+	   allows the driver to use cheaper accesses in some cases.
+
+	   Problem with this is that if we overflow the IOMMU area and
+	   return DAC as fallback address the device may not handle it
+	   correctly.
+
+	   As a special case some controllers have a 39bit address
+	   mode that is as efficient as 32bit (aic79xx). Don't force
+	   SAC for these.  Assume all masks <= 40 bits are of this
+	   type. Normally this doesn't make any difference, but gives
+	   more gentle handling of IOMMU overflow. */
+	if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
+		dev_info(dev, "Force SAC with mask %lx\n", mask);
+		return 0;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL(iommu_dma_supported);
+
+#endif
diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c
new file mode 100644
index 0000000..16c5051
--- /dev/null
+++ b/arch/ia64/kernel/pci-swiotlb.c
@@ -0,0 +1,46 @@
+/* Glue code to lib/swiotlb.c */
+
+#include <linux/pci.h>
+#include <linux/cache.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/swiotlb.h>
+#include <asm/dma.h>
+#include <asm/iommu.h>
+#include <asm/machvec.h>
+
+int swiotlb __read_mostly;
+EXPORT_SYMBOL(swiotlb);
+
+struct dma_mapping_ops swiotlb_dma_ops = {
+	.mapping_error = swiotlb_dma_mapping_error,
+	.alloc_coherent = swiotlb_alloc_coherent,
+	.free_coherent = swiotlb_free_coherent,
+	.map_single = swiotlb_map_single,
+	.unmap_single = swiotlb_unmap_single,
+	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+	.sync_single_for_device = swiotlb_sync_single_for_device,
+	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
+	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device = swiotlb_sync_sg_for_device,
+	.map_sg = swiotlb_map_sg,
+	.unmap_sg = swiotlb_unmap_sg,
+	.dma_supported_op = swiotlb_dma_supported,
+};
+
+void __init pci_swiotlb_init(void)
+{
+	if (!iommu_detected) {
+#ifdef CONFIG_IA64_GENERIC
+		swiotlb = 1;
+		printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n");
+		machvec_init("dig");
+		swiotlb_init();
+		dma_ops = &swiotlb_dma_ops;
+#else
+		panic("Unable to find Intel IOMMU");
+#endif
+	}
+}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index fc8f350..ada4605 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -40,6 +40,7 @@
 #include <linux/capability.h>
 #include <linux/rcupdate.h>
 #include <linux/completion.h>
+#include <linux/tracehook.h>
 
 #include <asm/errno.h>
 #include <asm/intrinsics.h>
@@ -3684,7 +3685,7 @@ pfm_restart(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs)
 
 		PFM_SET_WORK_PENDING(task, 1);
 
-		tsk_set_notify_resume(task);
+		set_notify_resume(task);
 
 		/*
 		 * XXX: send reschedule if task runs on another CPU
@@ -5044,8 +5045,6 @@ pfm_handle_work(void)
 
 	PFM_SET_WORK_PENDING(current, 0);
 
-	tsk_clear_notify_resume(current);
-
 	regs = task_pt_regs(current);
 
 	/*
@@ -5414,7 +5413,7 @@ pfm_overflow_handler(struct task_struct *task, pfm_context_t *ctx, u64 pmc0, str
 			 * when coming from ctxsw, current still points to the
 			 * previous task, therefore we must work with task and not current.
 			 */
-			tsk_set_notify_resume(task);
+			set_notify_resume(task);
 		}
 		/*
 		 * defer until state is changed (shorten spin window). the context is locked
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 3ab8373..c571627 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/kdebug.h>
 #include <linux/utsname.h>
+#include <linux/tracehook.h>
 
 #include <asm/cpu.h>
 #include <asm/delay.h>
@@ -160,21 +161,6 @@ show_regs (struct pt_regs *regs)
 		show_stack(NULL, NULL);
 }
 
-void tsk_clear_notify_resume(struct task_struct *tsk)
-{
-#ifdef CONFIG_PERFMON
-	if (tsk->thread.pfm_needs_checking)
-		return;
-#endif
-	if (test_ti_thread_flag(task_thread_info(tsk), TIF_RESTORE_RSE))
-		return;
-	clear_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME);
-}
-
-/*
- * do_notify_resume_user():
- *	Called from notify_resume_user at entry.S, with interrupts disabled.
- */
 void
 do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
 {
@@ -203,6 +189,11 @@ do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
 		ia64_do_signal(scr, in_syscall);
 	}
 
+	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(&scr->pt);
+	}
+
 	/* copy user rbs to kernel rbs */
 	if (unlikely(test_thread_flag(TIF_RESTORE_RSE))) {
 		local_irq_enable();	/* force interrupt enable */
@@ -251,7 +242,6 @@ default_idle (void)
 /* We don't actually take CPU down, just spin without interrupts. */
 static inline void play_dead(void)
 {
-	extern void ia64_cpu_local_tick (void);
 	unsigned int this_cpu = smp_processor_id();
 
 	/* Ack it */
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 2a9943b..92c9689 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -22,6 +22,7 @@
 #include <linux/signal.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -603,7 +604,7 @@ void ia64_ptrace_stop(void)
 {
 	if (test_and_set_tsk_thread_flag(current, TIF_RESTORE_RSE))
 		return;
-	tsk_set_notify_resume(current);
+	set_notify_resume(current);
 	unw_init_running(do_sync_rbs, ia64_sync_user_rbs);
 }
 
@@ -613,7 +614,6 @@ void ia64_ptrace_stop(void)
 void ia64_sync_krbs(void)
 {
 	clear_tsk_thread_flag(current, TIF_RESTORE_RSE);
-	tsk_clear_notify_resume(current);
 
 	unw_init_running(do_sync_rbs, ia64_sync_kernel_rbs);
 }
@@ -644,7 +644,7 @@ ptrace_attach_sync_user_rbs (struct task_struct *child)
 		spin_lock_irq(&child->sighand->siglock);
 		if (child->state == TASK_STOPPED &&
 		    !test_and_set_tsk_thread_flag(child, TIF_RESTORE_RSE)) {
-			tsk_set_notify_resume(child);
+			set_notify_resume(child);
 
 			child->state = TASK_TRACED;
 			stopped = 1;
@@ -1232,37 +1232,16 @@ arch_ptrace (struct task_struct *child, long request, long addr, long data)
 }
 
 
-static void
-syscall_trace (void)
-{
-	/*
-	 * The 0x80 provides a way for the tracing parent to
-	 * distinguish between a syscall stop and SIGTRAP delivery.
-	 */
-	ptrace_notify(SIGTRAP
-		      | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
-
-	/*
-	 * This isn't the same as continuing with a signal, but it
-	 * will do for normal use.  strace only continues with a
-	 * signal if the stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
 /* "asmlinkage" so the input arguments are preserved... */
 
-asmlinkage void
+asmlinkage long
 syscall_trace_enter (long arg0, long arg1, long arg2, long arg3,
 		     long arg4, long arg5, long arg6, long arg7,
 		     struct pt_regs regs)
 {
-	if (test_thread_flag(TIF_SYSCALL_TRACE) 
-	    && (current->ptrace & PT_PTRACED))
-		syscall_trace();
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		if (tracehook_report_syscall_entry(&regs))
+			return -ENOSYS;
 
 	/* copy user rbs to kernel rbs */
 	if (test_thread_flag(TIF_RESTORE_RSE))
@@ -1283,6 +1262,7 @@ syscall_trace_enter (long arg0, long arg1, long arg2, long arg3,
 		audit_syscall_entry(arch, syscall, arg0, arg1, arg2, arg3);
 	}
 
+	return 0;
 }
 
 /* "asmlinkage" so the input arguments are preserved... */
@@ -1292,6 +1272,8 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3,
 		     long arg4, long arg5, long arg6, long arg7,
 		     struct pt_regs regs)
 {
+	int step;
+
 	if (unlikely(current->audit_context)) {
 		int success = AUDITSC_RESULT(regs.r10);
 		long result = regs.r8;
@@ -1301,10 +1283,9 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3,
 		audit_syscall_exit(success, result);
 	}
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	    || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
-		syscall_trace();
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(&regs, step);
 
 	/* copy user rbs to kernel rbs */
 	if (test_thread_flag(TIF_RESTORE_RSE))
@@ -1940,7 +1921,7 @@ gpregs_writeback(struct task_struct *target,
 {
 	if (test_and_set_tsk_thread_flag(target, TIF_RESTORE_RSE))
 		return 0;
-	tsk_set_notify_resume(target);
+	set_notify_resume(target);
 	return do_regset_call(do_gpregs_writeback, target, regset, 0, 0,
 		NULL, NULL);
 }
@@ -2199,3 +2180,68 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *tsk)
 #endif
 	return &user_ia64_view;
 }
+
+struct syscall_get_set_args {
+	unsigned int i;
+	unsigned int n;
+	unsigned long *args;
+	struct pt_regs *regs;
+	int rw;
+};
+
+static void syscall_get_set_args_cb(struct unw_frame_info *info, void *data)
+{
+	struct syscall_get_set_args *args = data;
+	struct pt_regs *pt = args->regs;
+	unsigned long *krbs, cfm, ndirty;
+	int i, count;
+
+	if (unw_unwind_to_user(info) < 0)
+		return;
+
+	cfm = pt->cr_ifs;
+	krbs = (unsigned long *)info->task + IA64_RBS_OFFSET/8;
+	ndirty = ia64_rse_num_regs(krbs, krbs + (pt->loadrs >> 19));
+
+	count = 0;
+	if (in_syscall(pt))
+		count = min_t(int, args->n, cfm & 0x7f);
+
+	for (i = 0; i < count; i++) {
+		if (args->rw)
+			*ia64_rse_skip_regs(krbs, ndirty + i + args->i) =
+				args->args[i];
+		else
+			args->args[i] = *ia64_rse_skip_regs(krbs,
+				ndirty + i + args->i);
+	}
+
+	if (!args->rw) {
+		while (i < args->n) {
+			args->args[i] = 0;
+			i++;
+		}
+	}
+}
+
+void ia64_syscall_get_set_arguments(struct task_struct *task,
+	struct pt_regs *regs, unsigned int i, unsigned int n,
+	unsigned long *args, int rw)
+{
+	struct syscall_get_set_args data = {
+		.i = i,
+		.n = n,
+		.args = args,
+		.regs = regs,
+		.rw = rw,
+	};
+
+	if (task == current)
+		unw_init_running(syscall_get_set_args_cb, &data);
+	else {
+		struct unw_frame_info ufi;
+		memset(&ufi, 0, sizeof(ufi));
+		unw_init_from_blocked_task(&ufi, task);
+		syscall_get_set_args_cb(&ufi, &data);
+	}
+}
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index c27d5b2..ae79117 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -116,6 +116,13 @@ unsigned int num_io_spaces;
  */
 #define	I_CACHE_STRIDE_SHIFT	5	/* Safest way to go: 32 bytes by 32 bytes */
 unsigned long ia64_i_cache_stride_shift = ~0;
+/*
+ * "clflush_cache_range()" needs to know what processor dependent stride size to
+ * use when it flushes cache lines including both d-cache and i-cache.
+ */
+/* Safest way to go: 32 bytes by 32 bytes */
+#define	CACHE_STRIDE_SHIFT	5
+unsigned long ia64_cache_stride_shift = ~0;
 
 /*
  * The merge_mask variable needs to be set to (max(iommu_page_size(iommu)) - 1).  This
@@ -352,7 +359,7 @@ reserve_memory (void)
 	}
 #endif
 
-#ifdef CONFIG_PROC_VMCORE
+#ifdef CONFIG_CRASH_KERNEL
 	if (reserve_elfcorehdr(&rsvd_region[n].start,
 			       &rsvd_region[n].end) == 0)
 		n++;
@@ -478,7 +485,12 @@ static __init int setup_nomca(char *s)
 }
 early_param("nomca", setup_nomca);
 
-#ifdef CONFIG_PROC_VMCORE
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+#ifdef CONFIG_CRASH_DUMP
 /* elfcorehdr= specifies the location of elf core header
  * stored by the crashed kernel.
  */
@@ -502,11 +514,11 @@ int __init reserve_elfcorehdr(unsigned long *start, unsigned long *end)
 	 * to work properly.
 	 */
 
-	if (elfcorehdr_addr >= ELFCORE_ADDR_MAX)
+	if (!is_vmcore_usable())
 		return -EINVAL;
 
 	if ((length = vmcore_find_descriptor_size(elfcorehdr_addr)) == 0) {
-		elfcorehdr_addr = ELFCORE_ADDR_MAX;
+		vmcore_unusable();
 		return -EINVAL;
 	}
 
@@ -616,7 +628,9 @@ setup_arch (char **cmdline_p)
 		ia64_mca_init();
 
 	platform_setup(cmdline_p);
+#ifndef CONFIG_IA64_HP_SIM
 	check_sal_cache_flush();
+#endif
 	paging_init();
 }
 
@@ -845,13 +859,14 @@ setup_per_cpu_areas (void)
 }
 
 /*
- * Calculate the max. cache line size.
+ * Do the following calculations:
  *
- * In addition, the minimum of the i-cache stride sizes is calculated for
- * "flush_icache_range()".
+ * 1. the max. cache line size.
+ * 2. the minimum of the i-cache stride sizes for "flush_icache_range()".
+ * 3. the minimum of the cache stride sizes for "clflush_cache_range()".
  */
 static void __cpuinit
-get_max_cacheline_size (void)
+get_cache_info(void)
 {
 	unsigned long line_size, max = 1;
 	u64 l, levels, unique_caches;
@@ -865,12 +880,14 @@ get_max_cacheline_size (void)
                 max = SMP_CACHE_BYTES;
 		/* Safest setup for "flush_icache_range()" */
 		ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT;
+		/* Safest setup for "clflush_cache_range()" */
+		ia64_cache_stride_shift = CACHE_STRIDE_SHIFT;
 		goto out;
         }
 
 	for (l = 0; l < levels; ++l) {
-		status = ia64_pal_cache_config_info(l, /* cache_type (data_or_unified)= */ 2,
-						    &cci);
+		/* cache_type (data_or_unified)=2 */
+		status = ia64_pal_cache_config_info(l, 2, &cci);
 		if (status != 0) {
 			printk(KERN_ERR
 			       "%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n",
@@ -878,15 +895,21 @@ get_max_cacheline_size (void)
 			max = SMP_CACHE_BYTES;
 			/* The safest setup for "flush_icache_range()" */
 			cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
+			/* The safest setup for "clflush_cache_range()" */
+			ia64_cache_stride_shift = CACHE_STRIDE_SHIFT;
 			cci.pcci_unified = 1;
+		} else {
+			if (cci.pcci_stride < ia64_cache_stride_shift)
+				ia64_cache_stride_shift = cci.pcci_stride;
+
+			line_size = 1 << cci.pcci_line_size;
+			if (line_size > max)
+				max = line_size;
 		}
-		line_size = 1 << cci.pcci_line_size;
-		if (line_size > max)
-			max = line_size;
+
 		if (!cci.pcci_unified) {
-			status = ia64_pal_cache_config_info(l,
-						    /* cache_type (instruction)= */ 1,
-						    &cci);
+			/* cache_type (instruction)=1*/
+			status = ia64_pal_cache_config_info(l, 1, &cci);
 			if (status != 0) {
 				printk(KERN_ERR
 				"%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n",
@@ -940,7 +963,7 @@ cpu_init (void)
 	}
 #endif
 
-	get_max_cacheline_size();
+	get_cache_info();
 
 	/*
 	 * We can't pass "local_cpu_data" to identify_cpu() because we haven't called
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index 19c5a78..e12500a 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
@@ -439,6 +440,13 @@ handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigse
 		sigaddset(&current->blocked, sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	/*
+	 * Let tracing know that we've done the handler setup.
+	 */
+	tracehook_signal_handler(sig, info, ka, &scr->pt,
+				 test_thread_flag(TIF_SINGLESTEP));
+
 	return 1;
 }
 
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index d8f05e5..1dcbb85 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -401,6 +401,7 @@ smp_callin (void)
 	spin_lock(&vector_lock);
 	/* Setup the per cpu irq handling data structures */
 	__setup_vector_irq(cpuid);
+	notify_cpu_starting(cpuid);
 	cpu_set(cpuid, cpu_online_map);
 	per_cpu(cpu_state, cpuid) = CPU_ONLINE;
 	spin_unlock(&vector_lock);
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index de71da8..10a7d47e 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -215,9 +215,6 @@ SECTIONS
   /* Per-cpu data: */
   percpu : { } :percpu
   . = ALIGN(PERCPU_PAGE_SIZE);
-#ifdef	CONFIG_SMP
-  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
-#endif
   __phys_per_cpu_start = .;
   .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
 	{
@@ -233,6 +230,11 @@ SECTIONS
   data : { } :data
   .data : AT(ADDR(.data) - LOAD_OFFSET)
 	{
+#ifdef	CONFIG_SMP
+  . = ALIGN(PERCPU_PAGE_SIZE);
+		__cpu0_per_cpu = .;
+  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
+#endif
 		DATA_DATA
 		*(.data1)
 		*(.gnu.linkonce.d*)
diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index 7914e48..8e99fed 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -46,4 +46,6 @@ config KVM_INTEL
 config KVM_TRACE
        bool
 
+source drivers/virtio/Kconfig
+
 endif # VIRTUALIZATION
diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile
index bf22fb9..cf37f8f 100644
--- a/arch/ia64/kvm/Makefile
+++ b/arch/ia64/kvm/Makefile
@@ -44,7 +44,11 @@ EXTRA_CFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 EXTRA_AFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 
 common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-		coalesced_mmio.o)
+		coalesced_mmio.o irq_comm.o)
+
+ifeq ($(CONFIG_DMAR),y)
+common-objs += $(addprefix ../../../virt/kvm/, vtd.o)
+endif
 
 kvm-objs := $(common-objs) kvm-ia64.o kvm_fw.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/ia64/kvm/irq.h b/arch/ia64/kvm/irq.h
new file mode 100644
index 0000000..c6786e8
--- /dev/null
+++ b/arch/ia64/kvm/irq.h
@@ -0,0 +1,31 @@
+/*
+ * irq.h: In-kernel interrupt controller related definitions
+ * Copyright (c) 2008, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Authors:
+ *   Xiantao Zhang <xiantao.zhang@intel.com>
+ *
+ */
+
+#ifndef __IRQ_H
+#define __IRQ_H
+
+static inline int irqchip_in_kernel(struct kvm *kvm)
+{
+	return 1;
+}
+
+#endif
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index cd0d1a7..a312c9e 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -31,6 +31,7 @@
 #include <linux/bitops.h>
 #include <linux/hrtimer.h>
 #include <linux/uaccess.h>
+#include <linux/intel-iommu.h>
 
 #include <asm/pgtable.h>
 #include <asm/gcc_intrin.h>
@@ -45,6 +46,7 @@
 #include "iodev.h"
 #include "ioapic.h"
 #include "lapic.h"
+#include "irq.h"
 
 static unsigned long kvm_vmm_base;
 static unsigned long kvm_vsa_base;
@@ -179,12 +181,16 @@ int kvm_dev_ioctl_check_extension(long ext)
 	switch (ext) {
 	case KVM_CAP_IRQCHIP:
 	case KVM_CAP_USER_MEMORY:
+	case KVM_CAP_MP_STATE:
 
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
 		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
 		break;
+	case KVM_CAP_IOMMU:
+		r = intel_iommu_found();
+		break;
 	default:
 		r = 0;
 	}
@@ -771,6 +777,7 @@ static void kvm_init_vm(struct kvm *kvm)
 	 */
 	kvm_build_io_pmt(kvm);
 
+	INIT_LIST_HEAD(&kvm->arch.assigned_dev_head);
 }
 
 struct  kvm *kvm_arch_create_vm(void)
@@ -1107,7 +1114,7 @@ static void kvm_migrate_hlt_timer(struct kvm_vcpu *vcpu)
 	struct hrtimer *p_ht = &vcpu->arch.hlt_timer;
 
 	if (hrtimer_cancel(p_ht))
-		hrtimer_start(p_ht, p_ht->expires, HRTIMER_MODE_ABS);
+		hrtimer_start_expires(p_ht, HRTIMER_MODE_ABS);
 }
 
 static enum hrtimer_restart hlt_timer_fn(struct hrtimer *data)
@@ -1334,6 +1341,10 @@ static void kvm_release_vm_pages(struct kvm *kvm)
 
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
+	kvm_iommu_unmap_guest(kvm);
+#ifdef  KVM_CAP_DEVICE_ASSIGNMENT
+	kvm_free_all_assigned_devices(kvm);
+#endif
 	kfree(kvm->arch.vioapic);
 	kvm_release_vm_pages(kvm);
 	kvm_free_physmem(kvm);
@@ -1435,17 +1446,24 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 		int user_alloc)
 {
 	unsigned long i;
-	struct page *page;
+	unsigned long pfn;
 	int npages = mem->memory_size >> PAGE_SHIFT;
 	struct kvm_memory_slot *memslot = &kvm->memslots[mem->slot];
 	unsigned long base_gfn = memslot->base_gfn;
 
 	for (i = 0; i < npages; i++) {
-		page = gfn_to_page(kvm, base_gfn + i);
-		kvm_set_pmt_entry(kvm, base_gfn + i,
-				page_to_pfn(page) << PAGE_SHIFT,
-				_PAGE_AR_RWX|_PAGE_MA_WB);
-		memslot->rmap[i] = (unsigned long)page;
+		pfn = gfn_to_pfn(kvm, base_gfn + i);
+		if (!kvm_is_mmio_pfn(pfn)) {
+			kvm_set_pmt_entry(kvm, base_gfn + i,
+					pfn << PAGE_SHIFT,
+				_PAGE_AR_RWX | _PAGE_MA_WB);
+			memslot->rmap[i] = (unsigned long)pfn_to_page(pfn);
+		} else {
+			kvm_set_pmt_entry(kvm, base_gfn + i,
+					GPFN_PHYS_MMIO | (pfn << PAGE_SHIFT),
+					_PAGE_MA_UC);
+			memslot->rmap[i] = 0;
+			}
 	}
 
 	return 0;
@@ -1789,11 +1807,43 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
-	return -EINVAL;
+	vcpu_load(vcpu);
+	mp_state->mp_state = vcpu->arch.mp_state;
+	vcpu_put(vcpu);
+	return 0;
+}
+
+static int vcpu_reset(struct kvm_vcpu *vcpu)
+{
+	int r;
+	long psr;
+	local_irq_save(psr);
+	r = kvm_insert_vmm_mapping(vcpu);
+	if (r)
+		goto fail;
+
+	vcpu->arch.launched = 0;
+	kvm_arch_vcpu_uninit(vcpu);
+	r = kvm_arch_vcpu_init(vcpu);
+	if (r)
+		goto fail;
+
+	kvm_purge_vmm_mapping(vcpu);
+	r = 0;
+fail:
+	local_irq_restore(psr);
+	return r;
 }
 
 int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
-	return -EINVAL;
+	int r = 0;
+
+	vcpu_load(vcpu);
+	vcpu->arch.mp_state = mp_state->mp_state;
+	if (vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)
+		r = vcpu_reset(vcpu);
+	vcpu_put(vcpu);
+	return r;
 }
diff --git a/arch/ia64/kvm/kvm_minstate.h b/arch/ia64/kvm/kvm_minstate.h
index 13980d9..2cc41d1 100644
--- a/arch/ia64/kvm/kvm_minstate.h
+++ b/arch/ia64/kvm/kvm_minstate.h
@@ -50,27 +50,18 @@
 
 #define PAL_VSA_SYNC_READ						\
 	/* begin to call pal vps sync_read */				\
+{.mii;									\
 	add r25 = VMM_VPD_BASE_OFFSET, r21;				\
-	adds r20 = VMM_VCPU_VSA_BASE_OFFSET, r21;  /* entry point */	\
+	nop 0x0;							\
+	mov r24=ip;							\
 	;;								\
+}									\
+{.mmb									\
+	add r24=0x20, r24;						\
 	ld8 r25 = [r25];      /* read vpd base */			\
-	ld8 r20 = [r20];						\
-	;;								\
-	add r20 = PAL_VPS_SYNC_READ,r20;				\
-	;;								\
-{ .mii;									\
-	nop 0x0;							\
-	mov r24 = ip;							\
-	mov b0 = r20;							\
+	br.cond.sptk kvm_vps_sync_read;		/*call the service*/	\
 	;;								\
 };									\
-{ .mmb;									\
-	add r24 = 0x20, r24;						\
-	nop 0x0;							\
-	br.cond.sptk b0;        /*  call the service */			\
-	;;								\
-};
-
 
 
 #define KVM_MINSTATE_GET_CURRENT(reg)   mov reg=r21
diff --git a/arch/ia64/kvm/optvfault.S b/arch/ia64/kvm/optvfault.S
index e4f15d6..634abad 100644
--- a/arch/ia64/kvm/optvfault.S
+++ b/arch/ia64/kvm/optvfault.S
@@ -1,9 +1,12 @@
 /*
- * arch/ia64/vmx/optvfault.S
+ * arch/ia64/kvm/optvfault.S
  * optimize virtualization fault handler
  *
  * Copyright (C) 2006 Intel Co
  *	Xuefei Xu (Anthony Xu) <anthony.xu@intel.com>
+ * Copyright (C) 2008 Intel Co
+ *      Add the support for Tukwila processors.
+ *	Xiantao Zhang <xiantao.zhang@intel.com>
  */
 
 #include <asm/asmmacro.h>
@@ -20,6 +23,98 @@
 #define ACCE_MOV_TO_PSR
 #define ACCE_THASH
 
+#define VMX_VPS_SYNC_READ			\
+	add r16=VMM_VPD_BASE_OFFSET,r21;	\
+	mov r17 = b0;				\
+	mov r18 = r24;				\
+	mov r19 = r25;				\
+	mov r20 = r31;				\
+	;;					\
+{.mii;						\
+	ld8 r16 = [r16];			\
+	nop 0x0;				\
+	mov r24 = ip;				\
+	;;					\
+};						\
+{.mmb;						\
+	add r24=0x20, r24;			\
+	mov r25 =r16;				\
+	br.sptk.many kvm_vps_sync_read;		\
+};						\
+	mov b0 = r17;				\
+	mov r24 = r18;				\
+	mov r25 = r19;				\
+	mov r31 = r20
+
+ENTRY(kvm_vps_entry)
+	adds r29 = VMM_VCPU_VSA_BASE_OFFSET,r21
+	;;
+	ld8 r29 = [r29]
+	;;
+	add r29 = r29, r30
+	;;
+	mov b0 = r29
+	br.sptk.many b0
+END(kvm_vps_entry)
+
+/*
+ *	Inputs:
+ *	r24 : return address
+ *  	r25 : vpd
+ *	r29 : scratch
+ *
+ */
+GLOBAL_ENTRY(kvm_vps_sync_read)
+	movl r30 = PAL_VPS_SYNC_READ
+	;;
+	br.sptk.many kvm_vps_entry
+END(kvm_vps_sync_read)
+
+/*
+ *	Inputs:
+ *	r24 : return address
+ *  	r25 : vpd
+ *	r29 : scratch
+ *
+ */
+GLOBAL_ENTRY(kvm_vps_sync_write)
+	movl r30 = PAL_VPS_SYNC_WRITE
+	;;
+	br.sptk.many kvm_vps_entry
+END(kvm_vps_sync_write)
+
+/*
+ *	Inputs:
+ *	r23 : pr
+ *	r24 : guest b0
+ *  	r25 : vpd
+ *
+ */
+GLOBAL_ENTRY(kvm_vps_resume_normal)
+	movl r30 = PAL_VPS_RESUME_NORMAL
+	;;
+	mov pr=r23,-2
+	br.sptk.many kvm_vps_entry
+END(kvm_vps_resume_normal)
+
+/*
+ *	Inputs:
+ *	r23 : pr
+ *	r24 : guest b0
+ *  	r25 : vpd
+ *	r17 : isr
+ */
+GLOBAL_ENTRY(kvm_vps_resume_handler)
+	movl r30 = PAL_VPS_RESUME_HANDLER
+	;;
+	ld8 r27=[r25]
+	shr r17=r17,IA64_ISR_IR_BIT
+	;;
+	dep r27=r17,r27,63,1   // bit 63 of r27 indicate whether enable CFLE
+	mov pr=r23,-2
+	br.sptk.many kvm_vps_entry
+END(kvm_vps_resume_handler)
+
 //mov r1=ar3
 GLOBAL_ENTRY(kvm_asm_mov_from_ar)
 #ifndef ACCE_MOV_FROM_AR
@@ -157,11 +252,11 @@ GLOBAL_ENTRY(kvm_asm_rsm)
 #ifndef ACCE_RSM
 	br.many kvm_virtualization_fault_back
 #endif
-	add r16=VMM_VPD_BASE_OFFSET,r21
+	VMX_VPS_SYNC_READ
+	;;
 	extr.u r26=r25,6,21
 	extr.u r27=r25,31,2
 	;;
-	ld8 r16=[r16]
 	extr.u r28=r25,36,1
 	dep r26=r27,r26,21,2
 	;;
@@ -196,7 +291,7 @@ GLOBAL_ENTRY(kvm_asm_rsm)
 	tbit.nz p6,p0=r23,0
 	;;
 	tbit.z.or p6,p0=r26,IA64_PSR_DT_BIT
-	(p6) br.dptk kvm_resume_to_guest
+	(p6) br.dptk kvm_resume_to_guest_with_sync
 	;;
 	add r26=VMM_VCPU_META_RR0_OFFSET,r21
 	add r27=VMM_VCPU_META_RR0_OFFSET+8,r21
@@ -212,7 +307,7 @@ GLOBAL_ENTRY(kvm_asm_rsm)
 	mov rr[r28]=r27
 	;;
 	srlz.d
-	br.many kvm_resume_to_guest
+	br.many kvm_resume_to_guest_with_sync
 END(kvm_asm_rsm)
 
 
@@ -221,11 +316,11 @@ GLOBAL_ENTRY(kvm_asm_ssm)
 #ifndef ACCE_SSM
 	br.many kvm_virtualization_fault_back
 #endif
-	add r16=VMM_VPD_BASE_OFFSET,r21
+	VMX_VPS_SYNC_READ
+	;;
 	extr.u r26=r25,6,21
 	extr.u r27=r25,31,2
 	;;
-	ld8 r16=[r16]
 	extr.u r28=r25,36,1
 	dep r26=r27,r26,21,2
 	;;  //r26 is imm24
@@ -271,7 +366,7 @@ kvm_asm_ssm_1:
 	tbit.nz p6,p0=r29,IA64_PSR_I_BIT
 	;;
 	tbit.z.or p6,p0=r19,IA64_PSR_I_BIT
-	(p6) br.dptk kvm_resume_to_guest
+	(p6) br.dptk kvm_resume_to_guest_with_sync
 	;;
 	add r29=VPD_VTPR_START_OFFSET,r16
 	add r30=VPD_VHPI_START_OFFSET,r16
@@ -286,7 +381,7 @@ kvm_asm_ssm_1:
 	;;
 	cmp.gt p6,p0=r30,r17
 	(p6) br.dpnt.few kvm_asm_dispatch_vexirq
-	br.many kvm_resume_to_guest
+	br.many kvm_resume_to_guest_with_sync
 END(kvm_asm_ssm)
 
 
@@ -295,10 +390,9 @@ GLOBAL_ENTRY(kvm_asm_mov_to_psr)
 #ifndef ACCE_MOV_TO_PSR
 	br.many kvm_virtualization_fault_back
 #endif
-	add r16=VMM_VPD_BASE_OFFSET,r21
-	extr.u r26=r25,13,7 //r2
+	VMX_VPS_SYNC_READ
 	;;
-	ld8 r16=[r16]
+	extr.u r26=r25,13,7 //r2
 	addl r20=@gprel(asm_mov_from_reg),gp
 	;;
 	adds r30=kvm_asm_mov_to_psr_back-asm_mov_from_reg,r20
@@ -374,7 +468,7 @@ kvm_asm_mov_to_psr_1:
 	;;
 	tbit.nz.or p6,p0=r17,IA64_PSR_I_BIT
 	tbit.z.or p6,p0=r30,IA64_PSR_I_BIT
-	(p6) br.dpnt.few kvm_resume_to_guest
+	(p6) br.dpnt.few kvm_resume_to_guest_with_sync
 	;;
 	add r29=VPD_VTPR_START_OFFSET,r16
 	add r30=VPD_VHPI_START_OFFSET,r16
@@ -389,13 +483,29 @@ kvm_asm_mov_to_psr_1:
 	;;
 	cmp.gt p6,p0=r30,r17
 	(p6) br.dpnt.few kvm_asm_dispatch_vexirq
-	br.many kvm_resume_to_guest
+	br.many kvm_resume_to_guest_with_sync
 END(kvm_asm_mov_to_psr)
 
 
 ENTRY(kvm_asm_dispatch_vexirq)
 //increment iip
+	mov r17 = b0
+	mov r18 = r31
+{.mii
+	add r25=VMM_VPD_BASE_OFFSET,r21
+	nop 0x0
+	mov r24 = ip
+	;;
+}
+{.mmb
+	add r24 = 0x20, r24
+	ld8 r25 = [r25]
+	br.sptk.many kvm_vps_sync_write
+}
+	mov b0 =r17
 	mov r16=cr.ipsr
+	mov r31 = r18
+	mov r19 = 37
 	;;
 	extr.u r17=r16,IA64_PSR_RI_BIT,2
 	tbit.nz p6,p7=r16,IA64_PSR_RI_BIT+1
@@ -435,25 +545,31 @@ GLOBAL_ENTRY(kvm_asm_thash)
 	;;
 kvm_asm_thash_back1:
 	shr.u r23=r19,61		// get RR number
-	adds r25=VMM_VCPU_VRR0_OFFSET,r21	// get vcpu->arch.vrr[0]'s addr
+	adds r28=VMM_VCPU_VRR0_OFFSET,r21	// get vcpu->arch.vrr[0]'s addr
 	adds r16=VMM_VPD_VPTA_OFFSET,r16	// get vpta
 	;;
-	shladd r27=r23,3,r25	// get vcpu->arch.vrr[r23]'s addr
+	shladd r27=r23,3,r28	// get vcpu->arch.vrr[r23]'s addr
 	ld8 r17=[r16]		// get PTA
 	mov r26=1
 	;;
-	extr.u r29=r17,2,6		// get pta.size
-	ld8 r25=[r27]		// get vcpu->arch.vrr[r23]'s value
+	extr.u r29=r17,2,6	// get pta.size
+	ld8 r28=[r27]		// get vcpu->arch.vrr[r23]'s value
 	;;
-	extr.u r25=r25,2,6		// get rr.ps
+	mov b0=r24
+	//Fallback to C if pta.vf is set
+	tbit.nz p6,p0=r17, 8
+	;;
+	(p6) mov r24=EVENT_THASH
+	(p6) br.cond.dpnt.many kvm_virtualization_fault_back
+	extr.u r28=r28,2,6	// get rr.ps
 	shl r22=r26,r29		// 1UL << pta.size
 	;;
-	shr.u r23=r19,r25		// vaddr >> rr.ps
+	shr.u r23=r19,r28	// vaddr >> rr.ps
 	adds r26=3,r29		// pta.size + 3
 	shl r27=r17,3		// pta << 3
 	;;
 	shl r23=r23,3		// (vaddr >> rr.ps) << 3
-	shr.u r27=r27,r26		// (pta << 3) >> (pta.size+3)
+	shr.u r27=r27,r26	// (pta << 3) >> (pta.size+3)
 	movl r16=7<<61
 	;;
 	adds r22=-1,r22		// (1UL << pta.size) - 1
@@ -724,6 +840,29 @@ END(asm_mov_from_reg)
  * r31: pr
  * r24: b0
  */
+ENTRY(kvm_resume_to_guest_with_sync)
+	adds r19=VMM_VPD_BASE_OFFSET,r21
+	mov r16 = r31
+	mov r17 = r24
+	;;
+{.mii
+	ld8 r25 =[r19]
+	nop 0x0
+	mov r24 = ip
+	;;
+}
+{.mmb
+	add r24 =0x20, r24
+	nop 0x0
+	br.sptk.many kvm_vps_sync_write
+}
+
+	mov r31 = r16
+	mov r24 =r17
+	;;
+	br.sptk.many kvm_resume_to_guest
+END(kvm_resume_to_guest_with_sync)
+
 ENTRY(kvm_resume_to_guest)
 	adds r16 = VMM_VCPU_SAVED_GP_OFFSET,r21
 	;;
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index 5a33f7e..3417783 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -962,9 +962,9 @@ static void kvm_do_resume_op(struct kvm_vcpu *vcpu)
 void vmm_transition(struct kvm_vcpu *vcpu)
 {
 	ia64_call_vsa(PAL_VPS_SAVE, (unsigned long)vcpu->arch.vpd,
-			0, 0, 0, 0, 0, 0);
+			1, 0, 0, 0, 0, 0);
 	vmm_trampoline(&vcpu->arch.guest, &vcpu->arch.host);
 	ia64_call_vsa(PAL_VPS_RESTORE, (unsigned long)vcpu->arch.vpd,
-						0, 0, 0, 0, 0, 0);
+						1, 0, 0, 0, 0, 0);
 	kvm_do_resume_op(vcpu);
 }
diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h
index b0fcfb6..341e3fe 100644
--- a/arch/ia64/kvm/vcpu.h
+++ b/arch/ia64/kvm/vcpu.h
@@ -313,21 +313,21 @@ static inline void vcpu_set_tr(struct thash_data *trp, u64 pte, u64 itir,
 	trp->rid = rid;
 }
 
-extern u64 kvm_lookup_mpa(u64 gpfn);
-extern u64 kvm_gpa_to_mpa(u64 gpa);
-
-/* Return I/O type if trye */
-#define __gpfn_is_io(gpfn)			\
-	({						\
-	 u64 pte, ret = 0;			\
-	 pte = kvm_lookup_mpa(gpfn);		\
-	 if (!(pte & GPFN_INV_MASK))		\
-	 ret = pte & GPFN_IO_MASK;	\
-	 ret;					\
-	 })
+extern u64 kvm_get_mpt_entry(u64 gpfn);
 
+/* Return I/ */
+static inline u64 __gpfn_is_io(u64 gpfn)
+{
+	u64  pte;
+	pte = kvm_get_mpt_entry(gpfn);
+	if (!(pte & GPFN_INV_MASK)) {
+		pte = pte & GPFN_IO_MASK;
+		if (pte != GPFN_PHYS_MMIO)
+			return pte;
+	}
+	return 0;
+}
 #endif
-
 #define IA64_NO_FAULT	0
 #define IA64_FAULT	1
 
diff --git a/arch/ia64/kvm/vmm_ivt.S b/arch/ia64/kvm/vmm_ivt.S
index 3ee5f48..c1d7251 100644
--- a/arch/ia64/kvm/vmm_ivt.S
+++ b/arch/ia64/kvm/vmm_ivt.S
@@ -1261,11 +1261,6 @@ kvm_rse_clear_invalid:
     adds r19=VMM_VPD_VPSR_OFFSET,r18
     ;;
     ld8 r19=[r19]        //vpsr
-    adds r20=VMM_VCPU_VSA_BASE_OFFSET,r21
-    ;;
-    ld8 r20=[r20]
-    ;;
-//vsa_sync_write_start
     mov r25=r18
     adds r16= VMM_VCPU_GP_OFFSET,r21
     ;;
@@ -1274,10 +1269,7 @@ kvm_rse_clear_invalid:
     ;;
     add  r24=r24,r16
     ;;
-    add r16=PAL_VPS_SYNC_WRITE,r20
-    ;;
-    mov b0=r16
-    br.cond.sptk b0         // call the service
+    br.sptk.many  kvm_vps_sync_write       // call the service
     ;;
 END(ia64_leave_hypervisor)
 // fall through
@@ -1288,28 +1280,15 @@ GLOBAL_ENTRY(ia64_vmm_entry)
  *  r17:cr.isr
  *  r18:vpd
  *  r19:vpsr
- *  r20:__vsa_base
  *  r22:b0
  *  r23:predicate
  */
     mov r24=r22
     mov r25=r18
     tbit.nz p1,p2 = r19,IA64_PSR_IC_BIT        // p1=vpsr.ic
+    (p1) br.cond.sptk.few kvm_vps_resume_normal
+    (p2) br.cond.sptk.many kvm_vps_resume_handler
     ;;
-    (p1) add r29=PAL_VPS_RESUME_NORMAL,r20
-    (p1) br.sptk.many ia64_vmm_entry_out
-    ;;
-    tbit.nz p1,p2 = r17,IA64_ISR_IR_BIT		//p1=cr.isr.ir
-    ;;
-    (p1) add r29=PAL_VPS_RESUME_NORMAL,r20
-    (p2) add r29=PAL_VPS_RESUME_HANDLER,r20
-    (p2) ld8 r26=[r25]
-    ;;
-ia64_vmm_entry_out:
-    mov pr=r23,-2
-    mov b0=r29
-    ;;
-    br.cond.sptk b0             // call pal service
 END(ia64_vmm_entry)
 
 
@@ -1376,6 +1355,9 @@ GLOBAL_ENTRY(vmm_reset_entry)
     //set up ipsr, iip, vpd.vpsr, dcr
     // For IPSR: it/dt/rt=1, i/ic=1, si=1, vm/bn=1
     // For DCR: all bits 0
+    bsw.0
+    ;;
+    mov r21 =r13
     adds r14=-VMM_PT_REGS_SIZE, r12
     ;;
     movl r6=0x501008826000      // IPSR dt/rt/it:1;i/ic:1, si:1, vm/bn:1
@@ -1387,12 +1369,6 @@ GLOBAL_ENTRY(vmm_reset_entry)
     ;;
     srlz.i
     ;;
-    bsw.0
-    ;;
-    mov r21 =r13
-    ;;
-    bsw.1
-    ;;
     mov ar.rsc = 0
     ;;
     flushrs
@@ -1406,12 +1382,9 @@ GLOBAL_ENTRY(vmm_reset_entry)
     ld8 r1 = [r20]
     ;;
     mov cr.iip=r4
-    ;;
     adds r16=VMM_VPD_BASE_OFFSET,r13
-    adds r20=VMM_VCPU_VSA_BASE_OFFSET,r13
     ;;
     ld8 r18=[r16]
-    ld8 r20=[r20]
     ;;
     adds r19=VMM_VPD_VPSR_OFFSET,r18
     ;;
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index def4576..e22b933 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -390,7 +390,7 @@ void thash_purge_entries_remote(struct kvm_vcpu *v, u64 va, u64 ps)
 
 u64 translate_phy_pte(u64 *pte, u64 itir, u64 va)
 {
-	u64 ps, ps_mask, paddr, maddr;
+	u64 ps, ps_mask, paddr, maddr, io_mask;
 	union pte_flags phy_pte;
 
 	ps = itir_ps(itir);
@@ -398,8 +398,9 @@ u64 translate_phy_pte(u64 *pte, u64 itir, u64 va)
 	phy_pte.val = *pte;
 	paddr = *pte;
 	paddr = ((paddr & _PAGE_PPN_MASK) & ps_mask) | (va & ~ps_mask);
-	maddr = kvm_lookup_mpa(paddr >> PAGE_SHIFT);
-	if (maddr & GPFN_IO_MASK) {
+	maddr = kvm_get_mpt_entry(paddr >> PAGE_SHIFT);
+	io_mask = maddr & GPFN_IO_MASK;
+	if (io_mask && (io_mask != GPFN_PHYS_MMIO)) {
 		*pte |= VTLB_PTE_IO;
 		return -1;
 	}
@@ -418,7 +419,7 @@ int thash_purge_and_insert(struct kvm_vcpu *v, u64 pte, u64 itir,
 						u64 ifa, int type)
 {
 	u64 ps;
-	u64 phy_pte;
+	u64 phy_pte, io_mask, index;
 	union ia64_rr vrr, mrr;
 	int ret = 0;
 
@@ -426,13 +427,16 @@ int thash_purge_and_insert(struct kvm_vcpu *v, u64 pte, u64 itir,
 	vrr.val = vcpu_get_rr(v, ifa);
 	mrr.val = ia64_get_rr(ifa);
 
+	index = (pte & _PAGE_PPN_MASK) >> PAGE_SHIFT;
+	io_mask = kvm_get_mpt_entry(index) & GPFN_IO_MASK;
 	phy_pte = translate_phy_pte(&pte, itir, ifa);
 
 	/* Ensure WB attribute if pte is related to a normal mem page,
 	 * which is required by vga acceleration since qemu maps shared
 	 * vram buffer with WB.
 	 */
-	if (!(pte & VTLB_PTE_IO) && ((pte & _PAGE_MA_MASK) != _PAGE_MA_NAT)) {
+	if (!(pte & VTLB_PTE_IO) && ((pte & _PAGE_MA_MASK) != _PAGE_MA_NAT) &&
+			io_mask != GPFN_PHYS_MMIO) {
 		pte &= ~_PAGE_MA_MASK;
 		phy_pte &= ~_PAGE_MA_MASK;
 	}
@@ -566,12 +570,19 @@ void thash_init(struct thash_cb *hcb, u64 sz)
 	}
 }
 
-u64 kvm_lookup_mpa(u64 gpfn)
+u64 kvm_get_mpt_entry(u64 gpfn)
 {
 	u64 *base = (u64 *) KVM_P2M_BASE;
 	return *(base + gpfn);
 }
 
+u64 kvm_lookup_mpa(u64 gpfn)
+{
+	u64 maddr;
+	maddr = kvm_get_mpt_entry(gpfn);
+	return maddr&_PAGE_PPN_MASK;
+}
+
 u64 kvm_gpa_to_mpa(u64 gpa)
 {
 	u64 pte = kvm_lookup_mpa(gpa >> PAGE_SHIFT);
diff --git a/arch/ia64/lib/flush.S b/arch/ia64/lib/flush.S
index 2a0d27f..1d8c888 100644
--- a/arch/ia64/lib/flush.S
+++ b/arch/ia64/lib/flush.S
@@ -60,3 +60,58 @@ GLOBAL_ENTRY(flush_icache_range)
 	mov	ar.lc=r3		// restore ar.lc
 	br.ret.sptk.many rp
 END(flush_icache_range)
+
+	/*
+	 * clflush_cache_range(start,size)
+	 *
+	 *	Flush cache lines from start to start+size-1.
+	 *
+	 *	Must deal with range from start to start+size-1 but nothing else
+	 *	(need to be careful not to touch addresses that may be
+	 *	unmapped).
+	 *
+	 *	Note: "in0" and "in1" are preserved for debugging purposes.
+	 */
+	.section .kprobes.text,"ax"
+GLOBAL_ENTRY(clflush_cache_range)
+
+	.prologue
+	alloc	r2=ar.pfs,2,0,0,0
+	movl	r3=ia64_cache_stride_shift
+	mov	r21=1
+	add     r22=in1,in0
+	;;
+	ld8	r20=[r3]		// r20: stride shift
+	sub	r22=r22,r0,1		// last byte address
+	;;
+	shr.u	r23=in0,r20		// start / (stride size)
+	shr.u	r22=r22,r20		// (last byte address) / (stride size)
+	shl	r21=r21,r20		// r21: stride size of the i-cache(s)
+	;;
+	sub	r8=r22,r23		// number of strides - 1
+	shl	r24=r23,r20		// r24: addresses for "fc" =
+					//	"start" rounded down to stride
+					//	boundary
+	.save	ar.lc,r3
+	mov	r3=ar.lc		// save ar.lc
+	;;
+
+	.body
+	mov	ar.lc=r8
+	;;
+	/*
+	 * 32 byte aligned loop, even number of (actually 2) bundles
+	 */
+.Loop_fc:
+	fc	r24		// issuable on M0 only
+	add	r24=r21,r24	// we flush "stride size" bytes per iteration
+	nop.i	0
+	br.cloop.sptk.few .Loop_fc
+	;;
+	sync.i
+	;;
+	srlz.i
+	;;
+	mov	ar.lc=r3		// restore ar.lc
+	br.ret.sptk.many rp
+END(clflush_cache_range)
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index e566ff4..0ee085e 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -163,7 +163,7 @@ per_cpu_init (void)
 	 * get_zeroed_page().
 	 */
 	if (first_time) {
-		void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+		void *cpu0_data = __cpu0_per_cpu;
 
 		first_time=0;
 
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 78026aa..d8c5fcd 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -144,7 +144,7 @@ static void *per_cpu_node_setup(void *cpu_data, int node)
 
 	for_each_possible_early_cpu(cpu) {
 		if (cpu == 0) {
-			void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+			void *cpu0_data = __cpu0_per_cpu;
 			__per_cpu_offset[cpu] = (char*)cpu0_data -
 				__per_cpu_start;
 		} else if (node == node_cpuid[cpu].nid) {
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 200100e..054bcd9 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -21,7 +21,6 @@
 #include <linux/bitops.h>
 #include <linux/kexec.h>
 
-#include <asm/a.out.h>
 #include <asm/dma.h>
 #include <asm/ia32.h>
 #include <asm/io.h>
@@ -701,23 +700,6 @@ int arch_add_memory(int nid, u64 start, u64 size)
 
 	return ret;
 }
-#ifdef CONFIG_MEMORY_HOTREMOVE
-int remove_memory(u64 start, u64 size)
-{
-	unsigned long start_pfn, end_pfn;
-	unsigned long timeout = 120 * HZ;
-	int ret;
-	start_pfn = start >> PAGE_SHIFT;
-	end_pfn = start_pfn + (size >> PAGE_SHIFT);
-	ret = offline_pages(start_pfn, end_pfn, timeout);
-	if (ret)
-		goto out;
-	/* we can free mem_map at this point */
-out:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(remove_memory);
-#endif /* CONFIG_MEMORY_HOTREMOVE */
 #endif
 
 /*
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 8caf424..bd9818a 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -362,9 +362,13 @@ ia64_tlb_init (void)
 		per_cpu(ia64_tr_num, cpu) =
 				vm_info_1.pal_vm_info_1_s.max_dtr_entry+1;
 	if (per_cpu(ia64_tr_num, cpu) > IA64_TR_ALLOC_MAX) {
+		static int justonce = 1;
 		per_cpu(ia64_tr_num, cpu) = IA64_TR_ALLOC_MAX;
-		printk(KERN_DEBUG "TR register number exceeds IA64_TR_ALLOC_MAX!"
-			"IA64_TR_ALLOC_MAX should be extended\n");
+		if (justonce) {
+			justonce = 0;
+			printk(KERN_DEBUG "TR register number exceeds "
+			       "IA64_TR_ALLOC_MAX!\n");
+		}
 	}
 }
 
diff --git a/arch/ia64/oprofile/init.c b/arch/ia64/oprofile/init.c
index 125a602..31b545c 100644
--- a/arch/ia64/oprofile/init.c
+++ b/arch/ia64/oprofile/init.c
@@ -12,11 +12,11 @@
 #include <linux/init.h>
 #include <linux/errno.h>
  
-extern int perfmon_init(struct oprofile_operations * ops);
+extern int perfmon_init(struct oprofile_operations *ops);
 extern void perfmon_exit(void);
 extern void ia64_backtrace(struct pt_regs * const regs, unsigned int depth);
 
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	int ret = -ENODEV;
 
diff --git a/arch/ia64/oprofile/perfmon.c b/arch/ia64/oprofile/perfmon.c
index bc41dd3..192d3e8 100644
--- a/arch/ia64/oprofile/perfmon.c
+++ b/arch/ia64/oprofile/perfmon.c
@@ -56,7 +56,7 @@ static pfm_buffer_fmt_t oprofile_fmt = {
 };
 
 
-static char * get_cpu_type(void)
+static char *get_cpu_type(void)
 {
 	__u8 family = local_cpu_data->family;
 
@@ -75,7 +75,7 @@ static char * get_cpu_type(void)
 
 static int using_perfmon;
 
-int perfmon_init(struct oprofile_operations * ops)
+int perfmon_init(struct oprofile_operations *ops)
 {
 	int ret = pfm_register_buffer_fmt(&oprofile_fmt);
 	if (ret)
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 7545037..211fcfd 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -614,12 +614,17 @@ char *ia64_pci_get_legacy_mem(struct pci_bus *bus)
  * vector to get the base address.
  */
 int
-pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma)
+pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
+			   enum pci_mmap_state mmap_state)
 {
 	unsigned long size = vma->vm_end - vma->vm_start;
 	pgprot_t prot;
 	char *addr;
 
+	/* We only support mmap'ing of legacy memory space */
+	if (mmap_state != pci_mmap_mem)
+		return -ENOSYS;
+
 	/*
 	 * Avoid attribute aliasing.  See Documentation/ia64/aliasing.txt
 	 * for more details.
diff --git a/arch/ia64/scripts/pvcheck.sed b/arch/ia64/scripts/pvcheck.sed
new file mode 100644
index 0000000..ba66ac2
--- /dev/null
+++ b/arch/ia64/scripts/pvcheck.sed
@@ -0,0 +1,32 @@
+#
+# Checker for paravirtualizations of privileged operations.
+#
+s/ssm.*psr\.ic.*/.warning \"ssm psr.ic should not be used directly\"/g
+s/rsm.*psr\.ic.*/.warning \"rsm psr.ic should not be used directly\"/g
+s/ssm.*psr\.i.*/.warning \"ssm psr.i should not be used directly\"/g
+s/rsm.*psr\.i.*/.warning \"rsm psr.i should not be used directly\"/g
+s/ssm.*psr\.dt.*/.warning \"ssm psr.dt should not be used directly\"/g
+s/rsm.*psr\.dt.*/.warning \"rsm psr.dt should not be used directly\"/g
+s/mov.*=.*cr\.ifa/.warning \"cr.ifa should not used directly\"/g
+s/mov.*=.*cr\.itir/.warning \"cr.itir should not used directly\"/g
+s/mov.*=.*cr\.isr/.warning \"cr.isr should not used directly\"/g
+s/mov.*=.*cr\.iha/.warning \"cr.iha should not used directly\"/g
+s/mov.*=.*cr\.ipsr/.warning \"cr.ipsr should not used directly\"/g
+s/mov.*=.*cr\.iim/.warning \"cr.iim should not used directly\"/g
+s/mov.*=.*cr\.iip/.warning \"cr.iip should not used directly\"/g
+s/mov.*=.*cr\.ivr/.warning \"cr.ivr should not used directly\"/g
+s/mov.*=[^\.]*psr/.warning \"psr should not used directly\"/g	# avoid ar.fpsr
+s/mov.*=.*ar\.eflags/.warning \"ar.eflags should not used directly\"/g
+s/mov.*cr\.ifa.*=.*/.warning \"cr.ifa should not used directly\"/g
+s/mov.*cr\.itir.*=.*/.warning \"cr.itir should not used directly\"/g
+s/mov.*cr\.iha.*=.*/.warning \"cr.iha should not used directly\"/g
+s/mov.*cr\.ipsr.*=.*/.warning \"cr.ipsr should not used directly\"/g
+s/mov.*cr\.ifs.*=.*/.warning \"cr.ifs should not used directly\"/g
+s/mov.*cr\.iip.*=.*/.warning \"cr.iip should not used directly\"/g
+s/mov.*cr\.kr.*=.*/.warning \"cr.kr should not used directly\"/g
+s/mov.*ar\.eflags.*=.*/.warning \"ar.eflags should not used directly\"/g
+s/itc\.i.*/.warning \"itc.i should not be used directly.\"/g
+s/itc\.d.*/.warning \"itc.d should not be used directly.\"/g
+s/bsw\.0/.warning \"bsw.0 should not be used directly.\"/g
+s/bsw\.1/.warning \"bsw.1 should not be used directly.\"/g
+s/ptc\.ga.*/.warning \"ptc.ga should not be used directly.\"/g
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index 6568942..bc610a6 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -232,7 +232,7 @@ exit:
 static unsigned int
 get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
 {
-	unsigned long adr;
+	unsigned long long adr;
 	acpi_handle child;
 	unsigned int devfn;
 	int function;
@@ -292,8 +292,8 @@ get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
 static acpi_status
 find_matching_device(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
-	unsigned long bbn = -1;
-	unsigned long adr;
+	unsigned long long bbn = -1;
+	unsigned long long adr;
 	acpi_handle parent = NULL;
 	acpi_status status;
 	unsigned int devfn;
@@ -348,7 +348,7 @@ sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info,
 	unsigned int host_devfn;
 	struct sn_pcidev_match pcidev_match;
 	acpi_handle rootbus_handle;
-	unsigned long segment;
+	unsigned long long segment;
 	acpi_status status;
 
 	rootbus_handle = PCI_CONTROLLER(dev)->acpi_handle;
@@ -357,7 +357,7 @@ sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info,
         if (ACPI_SUCCESS(status)) {
 		if (segment != pci_domain_nr(dev)) {
 			printk(KERN_ERR
-			       "%s: Segment number mismatch, 0x%lx vs 0x%x for: ",
+			       "%s: Segment number mismatch, 0x%llx vs 0x%x for: ",
 			       __func__, segment, pci_domain_nr(dev));
 			acpi_ns_print_node_pathname(rootbus_handle, NULL);
 			printk("\n");
diff --git a/arch/ia64/xen/Kconfig b/arch/ia64/xen/Kconfig
new file mode 100644
index 0000000..f1683a2
--- /dev/null
+++ b/arch/ia64/xen/Kconfig
@@ -0,0 +1,26 @@
+#
+# This Kconfig describes xen/ia64 options
+#
+
+config XEN
+	bool "Xen hypervisor support"
+	default y
+	depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB && EXPERIMENTAL
+	select XEN_XENCOMM
+	select NO_IDLE_HZ
+
+	# those are required to save/restore.
+	select ARCH_SUSPEND_POSSIBLE
+	select SUSPEND
+	select PM_SLEEP
+	help
+	  Enable Xen hypervisor support.  Resulting kernel runs
+	  both as a guest OS on Xen and natively on hardware.
+
+config XEN_XENCOMM
+	depends on XEN
+	bool
+
+config NO_IDLE_HZ
+	depends on XEN
+	bool
diff --git a/arch/ia64/xen/Makefile b/arch/ia64/xen/Makefile
new file mode 100644
index 0000000..0ad0224
--- /dev/null
+++ b/arch/ia64/xen/Makefile
@@ -0,0 +1,22 @@
+#
+# Makefile for Xen components
+#
+
+obj-y := hypercall.o xenivt.o xensetup.o xen_pv_ops.o irq_xen.o \
+	 hypervisor.o xencomm.o xcom_hcall.o grant-table.o time.o suspend.o
+
+obj-$(CONFIG_IA64_GENERIC) += machvec.o
+
+AFLAGS_xenivt.o += -D__IA64_ASM_PARAVIRTUALIZED_XEN
+
+# xen multi compile
+ASM_PARAVIRT_MULTI_COMPILE_SRCS = ivt.S entry.S
+ASM_PARAVIRT_OBJS = $(addprefix xen-,$(ASM_PARAVIRT_MULTI_COMPILE_SRCS:.S=.o))
+obj-y += $(ASM_PARAVIRT_OBJS)
+define paravirtualized_xen
+AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_XEN
+endef
+$(foreach o,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_xen,$(o))))
+
+$(obj)/xen-%.o: $(src)/../kernel/%.S FORCE
+	$(call if_changed_dep,as_o_S)
diff --git a/arch/ia64/xen/grant-table.c b/arch/ia64/xen/grant-table.c
new file mode 100644
index 0000000..777dd9a
--- /dev/null
+++ b/arch/ia64/xen/grant-table.c
@@ -0,0 +1,155 @@
+/******************************************************************************
+ * arch/ia64/xen/grant-table.c
+ *
+ * Copyright (c) 2006 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/memory.h>
+#include <xen/grant_table.h>
+
+#include <asm/xen/hypervisor.h>
+
+struct vm_struct *xen_alloc_vm_area(unsigned long size)
+{
+	int order;
+	unsigned long virt;
+	unsigned long nr_pages;
+	struct vm_struct *area;
+
+	order = get_order(size);
+	virt = __get_free_pages(GFP_KERNEL, order);
+	if (virt == 0)
+		goto err0;
+	nr_pages = 1 << order;
+	scrub_pages(virt, nr_pages);
+
+	area = kmalloc(sizeof(*area), GFP_KERNEL);
+	if (area == NULL)
+		goto err1;
+
+	area->flags = VM_IOREMAP;
+	area->addr = (void *)virt;
+	area->size = size;
+	area->pages = NULL;
+	area->nr_pages = nr_pages;
+	area->phys_addr = 0;	/* xenbus_map_ring_valloc uses this field!  */
+
+	return area;
+
+err1:
+	free_pages(virt, order);
+err0:
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(xen_alloc_vm_area);
+
+void xen_free_vm_area(struct vm_struct *area)
+{
+	unsigned int order = get_order(area->size);
+	unsigned long i;
+	unsigned long phys_addr = __pa(area->addr);
+
+	/* This area is used for foreign page mappping.
+	 * So underlying machine page may not be assigned. */
+	for (i = 0; i < (1 << order); i++) {
+		unsigned long ret;
+		unsigned long gpfn = (phys_addr >> PAGE_SHIFT) + i;
+		struct xen_memory_reservation reservation = {
+			.nr_extents   = 1,
+			.address_bits = 0,
+			.extent_order = 0,
+			.domid        = DOMID_SELF
+		};
+		set_xen_guest_handle(reservation.extent_start, &gpfn);
+		ret = HYPERVISOR_memory_op(XENMEM_populate_physmap,
+					   &reservation);
+		BUG_ON(ret != 1);
+	}
+	free_pages((unsigned long)area->addr, order);
+	kfree(area);
+}
+EXPORT_SYMBOL_GPL(xen_free_vm_area);
+
+
+/****************************************************************************
+ * grant table hack
+ * cmd: GNTTABOP_xxx
+ */
+
+int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+			   unsigned long max_nr_gframes,
+			   struct grant_entry **__shared)
+{
+	*__shared = __va(frames[0] << PAGE_SHIFT);
+	return 0;
+}
+
+void arch_gnttab_unmap_shared(struct grant_entry *shared,
+			      unsigned long nr_gframes)
+{
+	/* nothing */
+}
+
+static void
+gnttab_map_grant_ref_pre(struct gnttab_map_grant_ref *uop)
+{
+	uint32_t flags;
+
+	flags = uop->flags;
+
+	if (flags & GNTMAP_host_map) {
+		if (flags & GNTMAP_application_map) {
+			printk(KERN_DEBUG
+			       "GNTMAP_application_map is not supported yet: "
+			       "flags 0x%x\n", flags);
+			BUG();
+		}
+		if (flags & GNTMAP_contains_pte) {
+			printk(KERN_DEBUG
+			       "GNTMAP_contains_pte is not supported yet: "
+			       "flags 0x%x\n", flags);
+			BUG();
+		}
+	} else if (flags & GNTMAP_device_map) {
+		printk("GNTMAP_device_map is not supported yet 0x%x\n", flags);
+		BUG();	/* not yet. actually this flag is not used. */
+	} else {
+		BUG();
+	}
+}
+
+int
+HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count)
+{
+	if (cmd == GNTTABOP_map_grant_ref) {
+		unsigned int i;
+		for (i = 0; i < count; i++) {
+			gnttab_map_grant_ref_pre(
+				(struct gnttab_map_grant_ref *)uop + i);
+		}
+	}
+	return xencomm_hypercall_grant_table_op(cmd, uop, count);
+}
+
+EXPORT_SYMBOL(HYPERVISOR_grant_table_op);
diff --git a/arch/ia64/xen/hypercall.S b/arch/ia64/xen/hypercall.S
new file mode 100644
index 0000000..d4ff0b9
--- /dev/null
+++ b/arch/ia64/xen/hypercall.S
@@ -0,0 +1,91 @@
+/*
+ * Support routines for Xen hypercalls
+ *
+ * Copyright (C) 2005 Dan Magenheimer <dan.magenheimer@hp.com>
+ * Copyright (C) 2008 Yaozu (Eddie) Dong <eddie.dong@intel.com>
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/intrinsics.h>
+#include <asm/xen/privop.h>
+
+/*
+ * Hypercalls without parameter.
+ */
+#define __HCALL0(name,hcall)		\
+	GLOBAL_ENTRY(name);		\
+	break	hcall;			\
+	br.ret.sptk.many rp;		\
+	END(name)
+
+/*
+ * Hypercalls with 1 parameter.
+ */
+#define __HCALL1(name,hcall)		\
+	GLOBAL_ENTRY(name);		\
+	mov r8=r32;			\
+	break	hcall;			\
+	br.ret.sptk.many rp;		\
+	END(name)
+
+/*
+ * Hypercalls with 2 parameters.
+ */
+#define __HCALL2(name,hcall)		\
+	GLOBAL_ENTRY(name);		\
+	mov r8=r32;			\
+	mov r9=r33;			\
+	break	hcall;			\
+	br.ret.sptk.many rp;		\
+	END(name)
+
+__HCALL0(xen_get_psr, HYPERPRIVOP_GET_PSR)
+__HCALL0(xen_get_ivr, HYPERPRIVOP_GET_IVR)
+__HCALL0(xen_get_tpr, HYPERPRIVOP_GET_TPR)
+__HCALL0(xen_hyper_ssm_i, HYPERPRIVOP_SSM_I)
+
+__HCALL1(xen_set_tpr, HYPERPRIVOP_SET_TPR)
+__HCALL1(xen_eoi, HYPERPRIVOP_EOI)
+__HCALL1(xen_thash, HYPERPRIVOP_THASH)
+__HCALL1(xen_set_itm, HYPERPRIVOP_SET_ITM)
+__HCALL1(xen_get_rr, HYPERPRIVOP_GET_RR)
+__HCALL1(xen_fc, HYPERPRIVOP_FC)
+__HCALL1(xen_get_cpuid, HYPERPRIVOP_GET_CPUID)
+__HCALL1(xen_get_pmd, HYPERPRIVOP_GET_PMD)
+
+__HCALL2(xen_ptcga, HYPERPRIVOP_PTC_GA)
+__HCALL2(xen_set_rr, HYPERPRIVOP_SET_RR)
+__HCALL2(xen_set_kr, HYPERPRIVOP_SET_KR)
+
+#ifdef CONFIG_IA32_SUPPORT
+__HCALL1(xen_get_eflag, HYPERPRIVOP_GET_EFLAG)
+__HCALL1(xen_set_eflag, HYPERPRIVOP_SET_EFLAG)	// refer SDM vol1 3.1.8
+#endif /* CONFIG_IA32_SUPPORT */
+
+GLOBAL_ENTRY(xen_set_rr0_to_rr4)
+	mov r8=r32
+	mov r9=r33
+	mov r10=r34
+	mov r11=r35
+	mov r14=r36
+	XEN_HYPER_SET_RR0_TO_RR4
+	br.ret.sptk.many rp
+	;;
+END(xen_set_rr0_to_rr4)
+
+GLOBAL_ENTRY(xen_send_ipi)
+	mov r14=r32
+	mov r15=r33
+	mov r2=0x400
+	break 0x1000
+	;;
+	br.ret.sptk.many rp
+	;;
+END(xen_send_ipi)
+
+GLOBAL_ENTRY(__hypercall)
+	mov r2=r37
+	break 0x1000
+	br.ret.sptk.many b0
+	;;
+END(__hypercall)
diff --git a/arch/ia64/xen/hypervisor.c b/arch/ia64/xen/hypervisor.c
new file mode 100644
index 0000000..cac4d97
--- /dev/null
+++ b/arch/ia64/xen/hypervisor.c
@@ -0,0 +1,96 @@
+/******************************************************************************
+ * arch/ia64/xen/hypervisor.c
+ *
+ * Copyright (c) 2006 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/efi.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/privop.h>
+
+#include "irq_xen.h"
+
+struct shared_info *HYPERVISOR_shared_info __read_mostly =
+	(struct shared_info *)XSI_BASE;
+EXPORT_SYMBOL(HYPERVISOR_shared_info);
+
+DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
+
+struct start_info *xen_start_info;
+EXPORT_SYMBOL(xen_start_info);
+
+EXPORT_SYMBOL(xen_domain_type);
+
+EXPORT_SYMBOL(__hypercall);
+
+/* Stolen from arch/x86/xen/enlighten.c */
+/*
+ * Flag to determine whether vcpu info placement is available on all
+ * VCPUs.  We assume it is to start with, and then set it to zero on
+ * the first failure.  This is because it can succeed on some VCPUs
+ * and not others, since it can involve hypervisor memory allocation,
+ * or because the guest failed to guarantee all the appropriate
+ * constraints on all VCPUs (ie buffer can't cross a page boundary).
+ *
+ * Note that any particular CPU may be using a placed vcpu structure,
+ * but we can only optimise if the all are.
+ *
+ * 0: not available, 1: available
+ */
+
+static void __init xen_vcpu_setup(int cpu)
+{
+	/*
+	 * WARNING:
+	 * before changing MAX_VIRT_CPUS,
+	 * check that shared_info fits on a page
+	 */
+	BUILD_BUG_ON(sizeof(struct shared_info) > PAGE_SIZE);
+	per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
+}
+
+void __init xen_setup_vcpu_info_placement(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		xen_vcpu_setup(cpu);
+}
+
+void __cpuinit
+xen_cpu_init(void)
+{
+	xen_smp_intr_init();
+}
+
+/**************************************************************************
+ * opt feature
+ */
+void
+xen_ia64_enable_opt_feature(void)
+{
+	/* Enable region 7 identity map optimizations in Xen */
+	struct xen_ia64_opt_feature optf;
+
+	optf.cmd = XEN_IA64_OPTF_IDENT_MAP_REG7;
+	optf.on = XEN_IA64_OPTF_ON;
+	optf.pgprot = pgprot_val(PAGE_KERNEL);
+	optf.key = 0;	/* No key on linux. */
+	HYPERVISOR_opt_feature(&optf);
+}
diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c
new file mode 100644
index 0000000..af93aad
--- /dev/null
+++ b/arch/ia64/xen/irq_xen.c
@@ -0,0 +1,435 @@
+/******************************************************************************
+ * arch/ia64/xen/irq_xen.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/cpu.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/callback.h>
+#include <xen/events.h>
+
+#include <asm/xen/privop.h>
+
+#include "irq_xen.h"
+
+/***************************************************************************
+ * pv_irq_ops
+ * irq operations
+ */
+
+static int
+xen_assign_irq_vector(int irq)
+{
+	struct physdev_irq irq_op;
+
+	irq_op.irq = irq;
+	if (HYPERVISOR_physdev_op(PHYSDEVOP_alloc_irq_vector, &irq_op))
+		return -ENOSPC;
+
+	return irq_op.vector;
+}
+
+static void
+xen_free_irq_vector(int vector)
+{
+	struct physdev_irq irq_op;
+
+	if (vector < IA64_FIRST_DEVICE_VECTOR ||
+	    vector > IA64_LAST_DEVICE_VECTOR)
+		return;
+
+	irq_op.vector = vector;
+	if (HYPERVISOR_physdev_op(PHYSDEVOP_free_irq_vector, &irq_op))
+		printk(KERN_WARNING "%s: xen_free_irq_vecotr fail vector=%d\n",
+		       __func__, vector);
+}
+
+
+static DEFINE_PER_CPU(int, timer_irq) = -1;
+static DEFINE_PER_CPU(int, ipi_irq) = -1;
+static DEFINE_PER_CPU(int, resched_irq) = -1;
+static DEFINE_PER_CPU(int, cmc_irq) = -1;
+static DEFINE_PER_CPU(int, cmcp_irq) = -1;
+static DEFINE_PER_CPU(int, cpep_irq) = -1;
+#define NAME_SIZE	15
+static DEFINE_PER_CPU(char[NAME_SIZE], timer_name);
+static DEFINE_PER_CPU(char[NAME_SIZE], ipi_name);
+static DEFINE_PER_CPU(char[NAME_SIZE], resched_name);
+static DEFINE_PER_CPU(char[NAME_SIZE], cmc_name);
+static DEFINE_PER_CPU(char[NAME_SIZE], cmcp_name);
+static DEFINE_PER_CPU(char[NAME_SIZE], cpep_name);
+#undef NAME_SIZE
+
+struct saved_irq {
+	unsigned int irq;
+	struct irqaction *action;
+};
+/* 16 should be far optimistic value, since only several percpu irqs
+ * are registered early.
+ */
+#define MAX_LATE_IRQ	16
+static struct saved_irq saved_percpu_irqs[MAX_LATE_IRQ];
+static unsigned short late_irq_cnt;
+static unsigned short saved_irq_cnt;
+static int xen_slab_ready;
+
+#ifdef CONFIG_SMP
+/* Dummy stub. Though we may check XEN_RESCHEDULE_VECTOR before __do_IRQ,
+ * it ends up to issue several memory accesses upon percpu data and
+ * thus adds unnecessary traffic to other paths.
+ */
+static irqreturn_t
+xen_dummy_handler(int irq, void *dev_id)
+{
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction xen_ipi_irqaction = {
+	.handler =	handle_IPI,
+	.flags =	IRQF_DISABLED,
+	.name =		"IPI"
+};
+
+static struct irqaction xen_resched_irqaction = {
+	.handler =	xen_dummy_handler,
+	.flags =	IRQF_DISABLED,
+	.name =		"resched"
+};
+
+static struct irqaction xen_tlb_irqaction = {
+	.handler =	xen_dummy_handler,
+	.flags =	IRQF_DISABLED,
+	.name =		"tlb_flush"
+};
+#endif
+
+/*
+ * This is xen version percpu irq registration, which needs bind
+ * to xen specific evtchn sub-system. One trick here is that xen
+ * evtchn binding interface depends on kmalloc because related
+ * port needs to be freed at device/cpu down. So we cache the
+ * registration on BSP before slab is ready and then deal them
+ * at later point. For rest instances happening after slab ready,
+ * we hook them to xen evtchn immediately.
+ *
+ * FIXME: MCA is not supported by far, and thus "nomca" boot param is
+ * required.
+ */
+static void
+__xen_register_percpu_irq(unsigned int cpu, unsigned int vec,
+			struct irqaction *action, int save)
+{
+	irq_desc_t *desc;
+	int irq = 0;
+
+	if (xen_slab_ready) {
+		switch (vec) {
+		case IA64_TIMER_VECTOR:
+			snprintf(per_cpu(timer_name, cpu),
+				 sizeof(per_cpu(timer_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_virq_to_irqhandler(VIRQ_ITC, cpu,
+				action->handler, action->flags,
+				per_cpu(timer_name, cpu), action->dev_id);
+			per_cpu(timer_irq, cpu) = irq;
+			break;
+		case IA64_IPI_RESCHEDULE:
+			snprintf(per_cpu(resched_name, cpu),
+				 sizeof(per_cpu(resched_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR, cpu,
+				action->handler, action->flags,
+				per_cpu(resched_name, cpu), action->dev_id);
+			per_cpu(resched_irq, cpu) = irq;
+			break;
+		case IA64_IPI_VECTOR:
+			snprintf(per_cpu(ipi_name, cpu),
+				 sizeof(per_cpu(ipi_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_ipi_to_irqhandler(XEN_IPI_VECTOR, cpu,
+				action->handler, action->flags,
+				per_cpu(ipi_name, cpu), action->dev_id);
+			per_cpu(ipi_irq, cpu) = irq;
+			break;
+		case IA64_CMC_VECTOR:
+			snprintf(per_cpu(cmc_name, cpu),
+				 sizeof(per_cpu(cmc_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_virq_to_irqhandler(VIRQ_MCA_CMC, cpu,
+						      action->handler,
+						      action->flags,
+						      per_cpu(cmc_name, cpu),
+						      action->dev_id);
+			per_cpu(cmc_irq, cpu) = irq;
+			break;
+		case IA64_CMCP_VECTOR:
+			snprintf(per_cpu(cmcp_name, cpu),
+				 sizeof(per_cpu(cmcp_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_ipi_to_irqhandler(XEN_CMCP_VECTOR, cpu,
+						     action->handler,
+						     action->flags,
+						     per_cpu(cmcp_name, cpu),
+						     action->dev_id);
+			per_cpu(cmcp_irq, cpu) = irq;
+			break;
+		case IA64_CPEP_VECTOR:
+			snprintf(per_cpu(cpep_name, cpu),
+				 sizeof(per_cpu(cpep_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_ipi_to_irqhandler(XEN_CPEP_VECTOR, cpu,
+						     action->handler,
+						     action->flags,
+						     per_cpu(cpep_name, cpu),
+						     action->dev_id);
+			per_cpu(cpep_irq, cpu) = irq;
+			break;
+		case IA64_CPE_VECTOR:
+		case IA64_MCA_RENDEZ_VECTOR:
+		case IA64_PERFMON_VECTOR:
+		case IA64_MCA_WAKEUP_VECTOR:
+		case IA64_SPURIOUS_INT_VECTOR:
+			/* No need to complain, these aren't supported. */
+			break;
+		default:
+			printk(KERN_WARNING "Percpu irq %d is unsupported "
+			       "by xen!\n", vec);
+			break;
+		}
+		BUG_ON(irq < 0);
+
+		if (irq > 0) {
+			/*
+			 * Mark percpu.  Without this, migrate_irqs() will
+			 * mark the interrupt for migrations and trigger it
+			 * on cpu hotplug.
+			 */
+			desc = irq_desc + irq;
+			desc->status |= IRQ_PER_CPU;
+		}
+	}
+
+	/* For BSP, we cache registered percpu irqs, and then re-walk
+	 * them when initializing APs
+	 */
+	if (!cpu && save) {
+		BUG_ON(saved_irq_cnt == MAX_LATE_IRQ);
+		saved_percpu_irqs[saved_irq_cnt].irq = vec;
+		saved_percpu_irqs[saved_irq_cnt].action = action;
+		saved_irq_cnt++;
+		if (!xen_slab_ready)
+			late_irq_cnt++;
+	}
+}
+
+static void
+xen_register_percpu_irq(ia64_vector vec, struct irqaction *action)
+{
+	__xen_register_percpu_irq(smp_processor_id(), vec, action, 1);
+}
+
+static void
+xen_bind_early_percpu_irq(void)
+{
+	int i;
+
+	xen_slab_ready = 1;
+	/* There's no race when accessing this cached array, since only
+	 * BSP will face with such step shortly
+	 */
+	for (i = 0; i < late_irq_cnt; i++)
+		__xen_register_percpu_irq(smp_processor_id(),
+					  saved_percpu_irqs[i].irq,
+					  saved_percpu_irqs[i].action, 0);
+}
+
+/* FIXME: There's no obvious point to check whether slab is ready. So
+ * a hack is used here by utilizing a late time hook.
+ */
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int __devinit
+unbind_evtchn_callback(struct notifier_block *nfb,
+		       unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+
+	if (action == CPU_DEAD) {
+		/* Unregister evtchn.  */
+		if (per_cpu(cpep_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(cpep_irq, cpu), NULL);
+			per_cpu(cpep_irq, cpu) = -1;
+		}
+		if (per_cpu(cmcp_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(cmcp_irq, cpu), NULL);
+			per_cpu(cmcp_irq, cpu) = -1;
+		}
+		if (per_cpu(cmc_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(cmc_irq, cpu), NULL);
+			per_cpu(cmc_irq, cpu) = -1;
+		}
+		if (per_cpu(ipi_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(ipi_irq, cpu), NULL);
+			per_cpu(ipi_irq, cpu) = -1;
+		}
+		if (per_cpu(resched_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(resched_irq, cpu),
+						NULL);
+			per_cpu(resched_irq, cpu) = -1;
+		}
+		if (per_cpu(timer_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(timer_irq, cpu), NULL);
+			per_cpu(timer_irq, cpu) = -1;
+		}
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block unbind_evtchn_notifier = {
+	.notifier_call = unbind_evtchn_callback,
+	.priority = 0
+};
+#endif
+
+void xen_smp_intr_init_early(unsigned int cpu)
+{
+#ifdef CONFIG_SMP
+	unsigned int i;
+
+	for (i = 0; i < saved_irq_cnt; i++)
+		__xen_register_percpu_irq(cpu, saved_percpu_irqs[i].irq,
+					  saved_percpu_irqs[i].action, 0);
+#endif
+}
+
+void xen_smp_intr_init(void)
+{
+#ifdef CONFIG_SMP
+	unsigned int cpu = smp_processor_id();
+	struct callback_register event = {
+		.type = CALLBACKTYPE_event,
+		.address = { .ip = (unsigned long)&xen_event_callback },
+	};
+
+	if (cpu == 0) {
+		/* Initialization was already done for boot cpu.  */
+#ifdef CONFIG_HOTPLUG_CPU
+		/* Register the notifier only once.  */
+		register_cpu_notifier(&unbind_evtchn_notifier);
+#endif
+		return;
+	}
+
+	/* This should be piggyback when setup vcpu guest context */
+	BUG_ON(HYPERVISOR_callback_op(CALLBACKOP_register, &event));
+#endif /* CONFIG_SMP */
+}
+
+void __init
+xen_irq_init(void)
+{
+	struct callback_register event = {
+		.type = CALLBACKTYPE_event,
+		.address = { .ip = (unsigned long)&xen_event_callback },
+	};
+
+	xen_init_IRQ();
+	BUG_ON(HYPERVISOR_callback_op(CALLBACKOP_register, &event));
+	late_time_init = xen_bind_early_percpu_irq;
+}
+
+void
+xen_platform_send_ipi(int cpu, int vector, int delivery_mode, int redirect)
+{
+#ifdef CONFIG_SMP
+	/* TODO: we need to call vcpu_up here */
+	if (unlikely(vector == ap_wakeup_vector)) {
+		/* XXX
+		 * This should be in __cpu_up(cpu) in ia64 smpboot.c
+		 * like x86. But don't want to modify it,
+		 * keep it untouched.
+		 */
+		xen_smp_intr_init_early(cpu);
+
+		xen_send_ipi(cpu, vector);
+		/* vcpu_prepare_and_up(cpu); */
+		return;
+	}
+#endif
+
+	switch (vector) {
+	case IA64_IPI_VECTOR:
+		xen_send_IPI_one(cpu, XEN_IPI_VECTOR);
+		break;
+	case IA64_IPI_RESCHEDULE:
+		xen_send_IPI_one(cpu, XEN_RESCHEDULE_VECTOR);
+		break;
+	case IA64_CMCP_VECTOR:
+		xen_send_IPI_one(cpu, XEN_CMCP_VECTOR);
+		break;
+	case IA64_CPEP_VECTOR:
+		xen_send_IPI_one(cpu, XEN_CPEP_VECTOR);
+		break;
+	case IA64_TIMER_VECTOR: {
+		/* this is used only once by check_sal_cache_flush()
+		   at boot time */
+		static int used = 0;
+		if (!used) {
+			xen_send_ipi(cpu, IA64_TIMER_VECTOR);
+			used = 1;
+			break;
+		}
+		/* fallthrough */
+	}
+	default:
+		printk(KERN_WARNING "Unsupported IPI type 0x%x\n",
+		       vector);
+		notify_remote_via_irq(0); /* defaults to 0 irq */
+		break;
+	}
+}
+
+static void __init
+xen_register_ipi(void)
+{
+#ifdef CONFIG_SMP
+	register_percpu_irq(IA64_IPI_VECTOR, &xen_ipi_irqaction);
+	register_percpu_irq(IA64_IPI_RESCHEDULE, &xen_resched_irqaction);
+	register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, &xen_tlb_irqaction);
+#endif
+}
+
+static void
+xen_resend_irq(unsigned int vector)
+{
+	(void)resend_irq_on_evtchn(vector);
+}
+
+const struct pv_irq_ops xen_irq_ops __initdata = {
+	.register_ipi = xen_register_ipi,
+
+	.assign_irq_vector = xen_assign_irq_vector,
+	.free_irq_vector = xen_free_irq_vector,
+	.register_percpu_irq = xen_register_percpu_irq,
+
+	.resend_irq = xen_resend_irq,
+};
diff --git a/arch/ia64/xen/irq_xen.h b/arch/ia64/xen/irq_xen.h
new file mode 100644
index 0000000..26110f3
--- /dev/null
+++ b/arch/ia64/xen/irq_xen.h
@@ -0,0 +1,34 @@
+/******************************************************************************
+ * arch/ia64/xen/irq_xen.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef IRQ_XEN_H
+#define IRQ_XEN_H
+
+extern void (*late_time_init)(void);
+extern char xen_event_callback;
+void __init xen_init_IRQ(void);
+
+extern const struct pv_irq_ops xen_irq_ops __initdata;
+extern void xen_smp_intr_init(void);
+extern void xen_send_ipi(int cpu, int vec);
+
+#endif /* IRQ_XEN_H */
diff --git a/arch/ia64/xen/machvec.c b/arch/ia64/xen/machvec.c
new file mode 100644
index 0000000..4ad588a
--- /dev/null
+++ b/arch/ia64/xen/machvec.c
@@ -0,0 +1,4 @@
+#define MACHVEC_PLATFORM_NAME           xen
+#define MACHVEC_PLATFORM_HEADER         <asm/machvec_xen.h>
+#include <asm/machvec_init.h>
+
diff --git a/arch/ia64/xen/suspend.c b/arch/ia64/xen/suspend.c
new file mode 100644
index 0000000..fd66b04
--- /dev/null
+++ b/arch/ia64/xen/suspend.c
@@ -0,0 +1,64 @@
+/******************************************************************************
+ * arch/ia64/xen/suspend.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * suspend/resume
+ */
+
+#include <xen/xen-ops.h>
+#include <asm/xen/hypervisor.h>
+#include "time.h"
+
+void
+xen_mm_pin_all(void)
+{
+	/* nothing */
+}
+
+void
+xen_mm_unpin_all(void)
+{
+	/* nothing */
+}
+
+void xen_pre_device_suspend(void)
+{
+	/* nothing */
+}
+
+void
+xen_pre_suspend()
+{
+	/* nothing */
+}
+
+void
+xen_post_suspend(int suspend_cancelled)
+{
+	if (suspend_cancelled)
+		return;
+
+	xen_ia64_enable_opt_feature();
+	/* add more if necessary */
+}
+
+void xen_arch_resume(void)
+{
+	xen_timer_resume_on_aps();
+}
diff --git a/arch/ia64/xen/time.c b/arch/ia64/xen/time.c
new file mode 100644
index 0000000..d15a94c
--- /dev/null
+++ b/arch/ia64/xen/time.c
@@ -0,0 +1,213 @@
+/******************************************************************************
+ * arch/ia64/xen/time.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel_stat.h>
+#include <linux/posix-timers.h>
+#include <linux/irq.h>
+#include <linux/clocksource.h>
+
+#include <asm/timex.h>
+
+#include <asm/xen/hypervisor.h>
+
+#include <xen/interface/vcpu.h>
+
+#include "../kernel/fsyscall_gtod_data.h"
+
+DEFINE_PER_CPU(struct vcpu_runstate_info, runstate);
+DEFINE_PER_CPU(unsigned long, processed_stolen_time);
+DEFINE_PER_CPU(unsigned long, processed_blocked_time);
+
+/* taken from i386/kernel/time-xen.c */
+static void xen_init_missing_ticks_accounting(int cpu)
+{
+	struct vcpu_register_runstate_memory_area area;
+	struct vcpu_runstate_info *runstate = &per_cpu(runstate, cpu);
+	int rc;
+
+	memset(runstate, 0, sizeof(*runstate));
+
+	area.addr.v = runstate;
+	rc = HYPERVISOR_vcpu_op(VCPUOP_register_runstate_memory_area, cpu,
+				&area);
+	WARN_ON(rc && rc != -ENOSYS);
+
+	per_cpu(processed_blocked_time, cpu) = runstate->time[RUNSTATE_blocked];
+	per_cpu(processed_stolen_time, cpu) = runstate->time[RUNSTATE_runnable]
+					    + runstate->time[RUNSTATE_offline];
+}
+
+/*
+ * Runstate accounting
+ */
+/* stolen from arch/x86/xen/time.c */
+static void get_runstate_snapshot(struct vcpu_runstate_info *res)
+{
+	u64 state_time;
+	struct vcpu_runstate_info *state;
+
+	BUG_ON(preemptible());
+
+	state = &__get_cpu_var(runstate);
+
+	/*
+	 * The runstate info is always updated by the hypervisor on
+	 * the current CPU, so there's no need to use anything
+	 * stronger than a compiler barrier when fetching it.
+	 */
+	do {
+		state_time = state->state_entry_time;
+		rmb();
+		*res = *state;
+		rmb();
+	} while (state->state_entry_time != state_time);
+}
+
+#define NS_PER_TICK (1000000000LL/HZ)
+
+static unsigned long
+consider_steal_time(unsigned long new_itm)
+{
+	unsigned long stolen, blocked;
+	unsigned long delta_itm = 0, stolentick = 0;
+	int cpu = smp_processor_id();
+	struct vcpu_runstate_info runstate;
+	struct task_struct *p = current;
+
+	get_runstate_snapshot(&runstate);
+
+	/*
+	 * Check for vcpu migration effect
+	 * In this case, itc value is reversed.
+	 * This causes huge stolen value.
+	 * This function just checks and reject this effect.
+	 */
+	if (!time_after_eq(runstate.time[RUNSTATE_blocked],
+			   per_cpu(processed_blocked_time, cpu)))
+		blocked = 0;
+
+	if (!time_after_eq(runstate.time[RUNSTATE_runnable] +
+			   runstate.time[RUNSTATE_offline],
+			   per_cpu(processed_stolen_time, cpu)))
+		stolen = 0;
+
+	if (!time_after(delta_itm + new_itm, ia64_get_itc()))
+		stolentick = ia64_get_itc() - new_itm;
+
+	do_div(stolentick, NS_PER_TICK);
+	stolentick++;
+
+	do_div(stolen, NS_PER_TICK);
+
+	if (stolen > stolentick)
+		stolen = stolentick;
+
+	stolentick -= stolen;
+	do_div(blocked, NS_PER_TICK);
+
+	if (blocked > stolentick)
+		blocked = stolentick;
+
+	if (stolen > 0 || blocked > 0) {
+		account_steal_time(NULL, jiffies_to_cputime(stolen));
+		account_steal_time(idle_task(cpu), jiffies_to_cputime(blocked));
+		run_local_timers();
+
+		if (rcu_pending(cpu))
+			rcu_check_callbacks(cpu, user_mode(get_irq_regs()));
+
+		scheduler_tick();
+		run_posix_cpu_timers(p);
+		delta_itm += local_cpu_data->itm_delta * (stolen + blocked);
+
+		if (cpu == time_keeper_id) {
+			write_seqlock(&xtime_lock);
+			do_timer(stolen + blocked);
+			local_cpu_data->itm_next = delta_itm + new_itm;
+			write_sequnlock(&xtime_lock);
+		} else {
+			local_cpu_data->itm_next = delta_itm + new_itm;
+		}
+		per_cpu(processed_stolen_time, cpu) += NS_PER_TICK * stolen;
+		per_cpu(processed_blocked_time, cpu) += NS_PER_TICK * blocked;
+	}
+	return delta_itm;
+}
+
+static int xen_do_steal_accounting(unsigned long *new_itm)
+{
+	unsigned long delta_itm;
+	delta_itm = consider_steal_time(*new_itm);
+	*new_itm += delta_itm;
+	if (time_after(*new_itm, ia64_get_itc()) && delta_itm)
+		return 1;
+
+	return 0;
+}
+
+static void xen_itc_jitter_data_reset(void)
+{
+	u64 lcycle, ret;
+
+	do {
+		lcycle = itc_jitter_data.itc_lastcycle;
+		ret = cmpxchg(&itc_jitter_data.itc_lastcycle, lcycle, 0);
+	} while (unlikely(ret != lcycle));
+}
+
+struct pv_time_ops xen_time_ops __initdata = {
+	.init_missing_ticks_accounting	= xen_init_missing_ticks_accounting,
+	.do_steal_accounting		= xen_do_steal_accounting,
+	.clocksource_resume		= xen_itc_jitter_data_reset,
+};
+
+/* Called after suspend, to resume time.  */
+static void xen_local_tick_resume(void)
+{
+	/* Just trigger a tick.  */
+	ia64_cpu_local_tick();
+	touch_softlockup_watchdog();
+}
+
+void
+xen_timer_resume(void)
+{
+	unsigned int cpu;
+
+	xen_local_tick_resume();
+
+	for_each_online_cpu(cpu)
+		xen_init_missing_ticks_accounting(cpu);
+}
+
+static void ia64_cpu_local_tick_fn(void *unused)
+{
+	xen_local_tick_resume();
+	xen_init_missing_ticks_accounting(smp_processor_id());
+}
+
+void
+xen_timer_resume_on_aps(void)
+{
+	smp_call_function(&ia64_cpu_local_tick_fn, NULL, 1);
+}
diff --git a/arch/ia64/xen/time.h b/arch/ia64/xen/time.h
new file mode 100644
index 0000000..f98d7e1
--- /dev/null
+++ b/arch/ia64/xen/time.h
@@ -0,0 +1,24 @@
+/******************************************************************************
+ * arch/ia64/xen/time.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+extern struct pv_time_ops xen_time_ops __initdata;
+void xen_timer_resume_on_aps(void);
diff --git a/arch/ia64/xen/xcom_hcall.c b/arch/ia64/xen/xcom_hcall.c
new file mode 100644
index 0000000..ccaf743
--- /dev/null
+++ b/arch/ia64/xen/xcom_hcall.c
@@ -0,0 +1,441 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ *          Tristan Gingold <tristan.gingold@bull.net>
+ *
+ *          Copyright (c) 2007
+ *          Isaku Yamahata <yamahata at valinux co jp>
+ *                          VA Linux Systems Japan K.K.
+ *          consolidate mini and inline version.
+ */
+
+#include <linux/module.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/memory.h>
+#include <xen/interface/grant_table.h>
+#include <xen/interface/callback.h>
+#include <xen/interface/vcpu.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/xencomm.h>
+
+/* Xencomm notes:
+ * This file defines hypercalls to be used by xencomm.  The hypercalls simply
+ * create inlines or mini descriptors for pointers and then call the raw arch
+ * hypercall xencomm_arch_hypercall_XXX
+ *
+ * If the arch wants to directly use these hypercalls, simply define macros
+ * in asm/xen/hypercall.h, eg:
+ *  #define HYPERVISOR_sched_op xencomm_hypercall_sched_op
+ *
+ * The arch may also define HYPERVISOR_xxx as a function and do more operations
+ * before/after doing the hypercall.
+ *
+ * Note: because only inline or mini descriptors are created these functions
+ * must only be called with in kernel memory parameters.
+ */
+
+int
+xencomm_hypercall_console_io(int cmd, int count, char *str)
+{
+	/* xen early printk uses console io hypercall before
+	 * xencomm initialization. In that case, we just ignore it.
+	 */
+	if (!xencomm_is_initialized())
+		return 0;
+
+	return xencomm_arch_hypercall_console_io
+		(cmd, count, xencomm_map_no_alloc(str, count));
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_console_io);
+
+int
+xencomm_hypercall_event_channel_op(int cmd, void *op)
+{
+	struct xencomm_handle *desc;
+	desc = xencomm_map_no_alloc(op, sizeof(struct evtchn_op));
+	if (desc == NULL)
+		return -EINVAL;
+
+	return xencomm_arch_hypercall_event_channel_op(cmd, desc);
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_event_channel_op);
+
+int
+xencomm_hypercall_xen_version(int cmd, void *arg)
+{
+	struct xencomm_handle *desc;
+	unsigned int argsize;
+
+	switch (cmd) {
+	case XENVER_version:
+		/* do not actually pass an argument */
+		return xencomm_arch_hypercall_xen_version(cmd, 0);
+	case XENVER_extraversion:
+		argsize = sizeof(struct xen_extraversion);
+		break;
+	case XENVER_compile_info:
+		argsize = sizeof(struct xen_compile_info);
+		break;
+	case XENVER_capabilities:
+		argsize = sizeof(struct xen_capabilities_info);
+		break;
+	case XENVER_changeset:
+		argsize = sizeof(struct xen_changeset_info);
+		break;
+	case XENVER_platform_parameters:
+		argsize = sizeof(struct xen_platform_parameters);
+		break;
+	case XENVER_get_features:
+		argsize = (arg == NULL) ? 0 : sizeof(struct xen_feature_info);
+		break;
+
+	default:
+		printk(KERN_DEBUG
+		       "%s: unknown version op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	desc = xencomm_map_no_alloc(arg, argsize);
+	if (desc == NULL)
+		return -EINVAL;
+
+	return xencomm_arch_hypercall_xen_version(cmd, desc);
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_xen_version);
+
+int
+xencomm_hypercall_physdev_op(int cmd, void *op)
+{
+	unsigned int argsize;
+
+	switch (cmd) {
+	case PHYSDEVOP_apic_read:
+	case PHYSDEVOP_apic_write:
+		argsize = sizeof(struct physdev_apic);
+		break;
+	case PHYSDEVOP_alloc_irq_vector:
+	case PHYSDEVOP_free_irq_vector:
+		argsize = sizeof(struct physdev_irq);
+		break;
+	case PHYSDEVOP_irq_status_query:
+		argsize = sizeof(struct physdev_irq_status_query);
+		break;
+
+	default:
+		printk(KERN_DEBUG
+		       "%s: unknown physdev op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	return xencomm_arch_hypercall_physdev_op
+		(cmd, xencomm_map_no_alloc(op, argsize));
+}
+
+static int
+xencommize_grant_table_op(struct xencomm_mini **xc_area,
+			  unsigned int cmd, void *op, unsigned int count,
+			  struct xencomm_handle **desc)
+{
+	struct xencomm_handle *desc1;
+	unsigned int argsize;
+
+	switch (cmd) {
+	case GNTTABOP_map_grant_ref:
+		argsize = sizeof(struct gnttab_map_grant_ref);
+		break;
+	case GNTTABOP_unmap_grant_ref:
+		argsize = sizeof(struct gnttab_unmap_grant_ref);
+		break;
+	case GNTTABOP_setup_table:
+	{
+		struct gnttab_setup_table *setup = op;
+
+		argsize = sizeof(*setup);
+
+		if (count != 1)
+			return -EINVAL;
+		desc1 = __xencomm_map_no_alloc
+			(xen_guest_handle(setup->frame_list),
+			 setup->nr_frames *
+			 sizeof(*xen_guest_handle(setup->frame_list)),
+			 *xc_area);
+		if (desc1 == NULL)
+			return -EINVAL;
+		(*xc_area)++;
+		set_xen_guest_handle(setup->frame_list, (void *)desc1);
+		break;
+	}
+	case GNTTABOP_dump_table:
+		argsize = sizeof(struct gnttab_dump_table);
+		break;
+	case GNTTABOP_transfer:
+		argsize = sizeof(struct gnttab_transfer);
+		break;
+	case GNTTABOP_copy:
+		argsize = sizeof(struct gnttab_copy);
+		break;
+	case GNTTABOP_query_size:
+		argsize = sizeof(struct gnttab_query_size);
+		break;
+	default:
+		printk(KERN_DEBUG "%s: unknown hypercall grant table op %d\n",
+		       __func__, cmd);
+		BUG();
+	}
+
+	*desc = __xencomm_map_no_alloc(op, count * argsize, *xc_area);
+	if (*desc == NULL)
+		return -EINVAL;
+	(*xc_area)++;
+
+	return 0;
+}
+
+int
+xencomm_hypercall_grant_table_op(unsigned int cmd, void *op,
+				 unsigned int count)
+{
+	int rc;
+	struct xencomm_handle *desc;
+	XENCOMM_MINI_ALIGNED(xc_area, 2);
+
+	rc = xencommize_grant_table_op(&xc_area, cmd, op, count, &desc);
+	if (rc)
+		return rc;
+
+	return xencomm_arch_hypercall_grant_table_op(cmd, desc, count);
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_grant_table_op);
+
+int
+xencomm_hypercall_sched_op(int cmd, void *arg)
+{
+	struct xencomm_handle *desc;
+	unsigned int argsize;
+
+	switch (cmd) {
+	case SCHEDOP_yield:
+	case SCHEDOP_block:
+		argsize = 0;
+		break;
+	case SCHEDOP_shutdown:
+		argsize = sizeof(struct sched_shutdown);
+		break;
+	case SCHEDOP_poll:
+	{
+		struct sched_poll *poll = arg;
+		struct xencomm_handle *ports;
+
+		argsize = sizeof(struct sched_poll);
+		ports = xencomm_map_no_alloc(xen_guest_handle(poll->ports),
+				     sizeof(*xen_guest_handle(poll->ports)));
+
+		set_xen_guest_handle(poll->ports, (void *)ports);
+		break;
+	}
+	default:
+		printk(KERN_DEBUG "%s: unknown sched op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	desc = xencomm_map_no_alloc(arg, argsize);
+	if (desc == NULL)
+		return -EINVAL;
+
+	return xencomm_arch_hypercall_sched_op(cmd, desc);
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_sched_op);
+
+int
+xencomm_hypercall_multicall(void *call_list, int nr_calls)
+{
+	int rc;
+	int i;
+	struct multicall_entry *mce;
+	struct xencomm_handle *desc;
+	XENCOMM_MINI_ALIGNED(xc_area, nr_calls * 2);
+
+	for (i = 0; i < nr_calls; i++) {
+		mce = (struct multicall_entry *)call_list + i;
+
+		switch (mce->op) {
+		case __HYPERVISOR_update_va_mapping:
+		case __HYPERVISOR_mmu_update:
+			/* No-op on ia64.  */
+			break;
+		case __HYPERVISOR_grant_table_op:
+			rc = xencommize_grant_table_op
+				(&xc_area,
+				 mce->args[0], (void *)mce->args[1],
+				 mce->args[2], &desc);
+			if (rc)
+				return rc;
+			mce->args[1] = (unsigned long)desc;
+			break;
+		case __HYPERVISOR_memory_op:
+		default:
+			printk(KERN_DEBUG
+			       "%s: unhandled multicall op entry op %lu\n",
+			       __func__, mce->op);
+			return -ENOSYS;
+		}
+	}
+
+	desc = xencomm_map_no_alloc(call_list,
+				    nr_calls * sizeof(struct multicall_entry));
+	if (desc == NULL)
+		return -EINVAL;
+
+	return xencomm_arch_hypercall_multicall(desc, nr_calls);
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_multicall);
+
+int
+xencomm_hypercall_callback_op(int cmd, void *arg)
+{
+	unsigned int argsize;
+	switch (cmd) {
+	case CALLBACKOP_register:
+		argsize = sizeof(struct callback_register);
+		break;
+	case CALLBACKOP_unregister:
+		argsize = sizeof(struct callback_unregister);
+		break;
+	default:
+		printk(KERN_DEBUG
+		       "%s: unknown callback op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	return xencomm_arch_hypercall_callback_op
+		(cmd, xencomm_map_no_alloc(arg, argsize));
+}
+
+static int
+xencommize_memory_reservation(struct xencomm_mini *xc_area,
+			      struct xen_memory_reservation *mop)
+{
+	struct xencomm_handle *desc;
+
+	desc = __xencomm_map_no_alloc(xen_guest_handle(mop->extent_start),
+			mop->nr_extents *
+			sizeof(*xen_guest_handle(mop->extent_start)),
+			xc_area);
+	if (desc == NULL)
+		return -EINVAL;
+
+	set_xen_guest_handle(mop->extent_start, (void *)desc);
+	return 0;
+}
+
+int
+xencomm_hypercall_memory_op(unsigned int cmd, void *arg)
+{
+	GUEST_HANDLE(xen_pfn_t) extent_start_va[2] = { {NULL}, {NULL} };
+	struct xen_memory_reservation *xmr = NULL;
+	int rc;
+	struct xencomm_handle *desc;
+	unsigned int argsize;
+	XENCOMM_MINI_ALIGNED(xc_area, 2);
+
+	switch (cmd) {
+	case XENMEM_increase_reservation:
+	case XENMEM_decrease_reservation:
+	case XENMEM_populate_physmap:
+		xmr = (struct xen_memory_reservation *)arg;
+		set_xen_guest_handle(extent_start_va[0],
+				     xen_guest_handle(xmr->extent_start));
+
+		argsize = sizeof(*xmr);
+		rc = xencommize_memory_reservation(xc_area, xmr);
+		if (rc)
+			return rc;
+		xc_area++;
+		break;
+
+	case XENMEM_maximum_ram_page:
+		argsize = 0;
+		break;
+
+	case XENMEM_add_to_physmap:
+		argsize = sizeof(struct xen_add_to_physmap);
+		break;
+
+	default:
+		printk(KERN_DEBUG "%s: unknown memory op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	desc = xencomm_map_no_alloc(arg, argsize);
+	if (desc == NULL)
+		return -EINVAL;
+
+	rc = xencomm_arch_hypercall_memory_op(cmd, desc);
+
+	switch (cmd) {
+	case XENMEM_increase_reservation:
+	case XENMEM_decrease_reservation:
+	case XENMEM_populate_physmap:
+		set_xen_guest_handle(xmr->extent_start,
+				     xen_guest_handle(extent_start_va[0]));
+		break;
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_memory_op);
+
+int
+xencomm_hypercall_suspend(unsigned long srec)
+{
+	struct sched_shutdown arg;
+
+	arg.reason = SHUTDOWN_suspend;
+
+	return xencomm_arch_hypercall_sched_op(
+		SCHEDOP_shutdown, xencomm_map_no_alloc(&arg, sizeof(arg)));
+}
+
+long
+xencomm_hypercall_vcpu_op(int cmd, int cpu, void *arg)
+{
+	unsigned int argsize;
+	switch (cmd) {
+	case VCPUOP_register_runstate_memory_area: {
+		struct vcpu_register_runstate_memory_area *area =
+			(struct vcpu_register_runstate_memory_area *)arg;
+		argsize = sizeof(*arg);
+		set_xen_guest_handle(area->addr.h,
+		     (void *)xencomm_map_no_alloc(area->addr.v,
+						  sizeof(area->addr.v)));
+		break;
+	}
+
+	default:
+		printk(KERN_DEBUG "%s: unknown vcpu op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	return xencomm_arch_hypercall_vcpu_op(cmd, cpu,
+					xencomm_map_no_alloc(arg, argsize));
+}
+
+long
+xencomm_hypercall_opt_feature(void *arg)
+{
+	return xencomm_arch_hypercall_opt_feature(
+		xencomm_map_no_alloc(arg,
+				     sizeof(struct xen_ia64_opt_feature)));
+}
diff --git a/arch/ia64/xen/xen_pv_ops.c b/arch/ia64/xen/xen_pv_ops.c
new file mode 100644
index 0000000..04cd123
--- /dev/null
+++ b/arch/ia64/xen/xen_pv_ops.c
@@ -0,0 +1,364 @@
+/******************************************************************************
+ * arch/ia64/xen/xen_pv_ops.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/console.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pm.h>
+
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/xencomm.h>
+#include <asm/xen/privop.h>
+
+#include "irq_xen.h"
+#include "time.h"
+
+/***************************************************************************
+ * general info
+ */
+static struct pv_info xen_info __initdata = {
+	.kernel_rpl = 2,	/* or 1: determin at runtime */
+	.paravirt_enabled = 1,
+	.name = "Xen/ia64",
+};
+
+#define IA64_RSC_PL_SHIFT	2
+#define IA64_RSC_PL_BIT_SIZE	2
+#define IA64_RSC_PL_MASK	\
+	(((1UL << IA64_RSC_PL_BIT_SIZE) - 1) << IA64_RSC_PL_SHIFT)
+
+static void __init
+xen_info_init(void)
+{
+	/* Xenified Linux/ia64 may run on pl = 1 or 2.
+	 * determin at run time. */
+	unsigned long rsc = ia64_getreg(_IA64_REG_AR_RSC);
+	unsigned int rpl = (rsc & IA64_RSC_PL_MASK) >> IA64_RSC_PL_SHIFT;
+	xen_info.kernel_rpl = rpl;
+}
+
+/***************************************************************************
+ * pv_init_ops
+ * initialization hooks.
+ */
+
+static void
+xen_panic_hypercall(struct unw_frame_info *info, void *arg)
+{
+	current->thread.ksp = (__u64)info->sw - 16;
+	HYPERVISOR_shutdown(SHUTDOWN_crash);
+	/* we're never actually going to get here... */
+}
+
+static int
+xen_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+	unw_init_running(xen_panic_hypercall, NULL);
+	/* we're never actually going to get here... */
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block xen_panic_block = {
+	xen_panic_event, NULL, 0 /* try to go last */
+};
+
+static void xen_pm_power_off(void)
+{
+	local_irq_disable();
+	HYPERVISOR_shutdown(SHUTDOWN_poweroff);
+}
+
+static void __init
+xen_banner(void)
+{
+	printk(KERN_INFO
+	       "Running on Xen! pl = %d start_info_pfn=0x%lx nr_pages=%ld "
+	       "flags=0x%x\n",
+	       xen_info.kernel_rpl,
+	       HYPERVISOR_shared_info->arch.start_info_pfn,
+	       xen_start_info->nr_pages, xen_start_info->flags);
+}
+
+static int __init
+xen_reserve_memory(struct rsvd_region *region)
+{
+	region->start = (unsigned long)__va(
+		(HYPERVISOR_shared_info->arch.start_info_pfn << PAGE_SHIFT));
+	region->end   = region->start + PAGE_SIZE;
+	return 1;
+}
+
+static void __init
+xen_arch_setup_early(void)
+{
+	struct shared_info *s;
+	BUG_ON(!xen_pv_domain());
+
+	s = HYPERVISOR_shared_info;
+	xen_start_info = __va(s->arch.start_info_pfn << PAGE_SHIFT);
+
+	/* Must be done before any hypercall.  */
+	xencomm_initialize();
+
+	xen_setup_features();
+	/* Register a call for panic conditions. */
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &xen_panic_block);
+	pm_power_off = xen_pm_power_off;
+
+	xen_ia64_enable_opt_feature();
+}
+
+static void __init
+xen_arch_setup_console(char **cmdline_p)
+{
+	add_preferred_console("xenboot", 0, NULL);
+	add_preferred_console("tty", 0, NULL);
+	/* use hvc_xen */
+	add_preferred_console("hvc", 0, NULL);
+
+#if !defined(CONFIG_VT) || !defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = NULL;
+#endif
+}
+
+static int __init
+xen_arch_setup_nomca(void)
+{
+	return 1;
+}
+
+static void __init
+xen_post_smp_prepare_boot_cpu(void)
+{
+	xen_setup_vcpu_info_placement();
+}
+
+static const struct pv_init_ops xen_init_ops __initdata = {
+	.banner = xen_banner,
+
+	.reserve_memory = xen_reserve_memory,
+
+	.arch_setup_early = xen_arch_setup_early,
+	.arch_setup_console = xen_arch_setup_console,
+	.arch_setup_nomca = xen_arch_setup_nomca,
+
+	.post_smp_prepare_boot_cpu = xen_post_smp_prepare_boot_cpu,
+};
+
+/***************************************************************************
+ * pv_cpu_ops
+ * intrinsics hooks.
+ */
+
+static void xen_setreg(int regnum, unsigned long val)
+{
+	switch (regnum) {
+	case _IA64_REG_AR_KR0 ... _IA64_REG_AR_KR7:
+		xen_set_kr(regnum - _IA64_REG_AR_KR0, val);
+		break;
+#ifdef CONFIG_IA32_SUPPORT
+	case _IA64_REG_AR_EFLAG:
+		xen_set_eflag(val);
+		break;
+#endif
+	case _IA64_REG_CR_TPR:
+		xen_set_tpr(val);
+		break;
+	case _IA64_REG_CR_ITM:
+		xen_set_itm(val);
+		break;
+	case _IA64_REG_CR_EOI:
+		xen_eoi(val);
+		break;
+	default:
+		ia64_native_setreg_func(regnum, val);
+		break;
+	}
+}
+
+static unsigned long xen_getreg(int regnum)
+{
+	unsigned long res;
+
+	switch (regnum) {
+	case _IA64_REG_PSR:
+		res = xen_get_psr();
+		break;
+#ifdef CONFIG_IA32_SUPPORT
+	case _IA64_REG_AR_EFLAG:
+		res = xen_get_eflag();
+		break;
+#endif
+	case _IA64_REG_CR_IVR:
+		res = xen_get_ivr();
+		break;
+	case _IA64_REG_CR_TPR:
+		res = xen_get_tpr();
+		break;
+	default:
+		res = ia64_native_getreg_func(regnum);
+		break;
+	}
+	return res;
+}
+
+/* turning on interrupts is a bit more complicated.. write to the
+ * memory-mapped virtual psr.i bit first (to avoid race condition),
+ * then if any interrupts were pending, we have to execute a hyperprivop
+ * to ensure the pending interrupt gets delivered; else we're done! */
+static void
+xen_ssm_i(void)
+{
+	int old = xen_get_virtual_psr_i();
+	xen_set_virtual_psr_i(1);
+	barrier();
+	if (!old && xen_get_virtual_pend())
+		xen_hyper_ssm_i();
+}
+
+/* turning off interrupts can be paravirtualized simply by writing
+ * to a memory-mapped virtual psr.i bit (implemented as a 16-bit bool) */
+static void
+xen_rsm_i(void)
+{
+	xen_set_virtual_psr_i(0);
+	barrier();
+}
+
+static unsigned long
+xen_get_psr_i(void)
+{
+	return xen_get_virtual_psr_i() ? IA64_PSR_I : 0;
+}
+
+static void
+xen_intrin_local_irq_restore(unsigned long mask)
+{
+	if (mask & IA64_PSR_I)
+		xen_ssm_i();
+	else
+		xen_rsm_i();
+}
+
+static const struct pv_cpu_ops xen_cpu_ops __initdata = {
+	.fc		= xen_fc,
+	.thash		= xen_thash,
+	.get_cpuid	= xen_get_cpuid,
+	.get_pmd	= xen_get_pmd,
+	.getreg		= xen_getreg,
+	.setreg		= xen_setreg,
+	.ptcga		= xen_ptcga,
+	.get_rr		= xen_get_rr,
+	.set_rr		= xen_set_rr,
+	.set_rr0_to_rr4	= xen_set_rr0_to_rr4,
+	.ssm_i		= xen_ssm_i,
+	.rsm_i		= xen_rsm_i,
+	.get_psr_i	= xen_get_psr_i,
+	.intrin_local_irq_restore
+			= xen_intrin_local_irq_restore,
+};
+
+/******************************************************************************
+ * replacement of hand written assembly codes.
+ */
+
+extern char xen_switch_to;
+extern char xen_leave_syscall;
+extern char xen_work_processed_syscall;
+extern char xen_leave_kernel;
+
+const struct pv_cpu_asm_switch xen_cpu_asm_switch = {
+	.switch_to		= (unsigned long)&xen_switch_to,
+	.leave_syscall		= (unsigned long)&xen_leave_syscall,
+	.work_processed_syscall	= (unsigned long)&xen_work_processed_syscall,
+	.leave_kernel		= (unsigned long)&xen_leave_kernel,
+};
+
+/***************************************************************************
+ * pv_iosapic_ops
+ * iosapic read/write hooks.
+ */
+static void
+xen_pcat_compat_init(void)
+{
+	/* nothing */
+}
+
+static struct irq_chip*
+xen_iosapic_get_irq_chip(unsigned long trigger)
+{
+	return NULL;
+}
+
+static unsigned int
+xen_iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	struct physdev_apic apic_op;
+	int ret;
+
+	apic_op.apic_physbase = (unsigned long)iosapic -
+					__IA64_UNCACHED_OFFSET;
+	apic_op.reg = reg;
+	ret = HYPERVISOR_physdev_op(PHYSDEVOP_apic_read, &apic_op);
+	if (ret)
+		return ret;
+	return apic_op.value;
+}
+
+static void
+xen_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	struct physdev_apic apic_op;
+
+	apic_op.apic_physbase = (unsigned long)iosapic -
+					__IA64_UNCACHED_OFFSET;
+	apic_op.reg = reg;
+	apic_op.value = val;
+	HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op);
+}
+
+static const struct pv_iosapic_ops xen_iosapic_ops __initdata = {
+	.pcat_compat_init = xen_pcat_compat_init,
+	.__get_irq_chip = xen_iosapic_get_irq_chip,
+
+	.__read = xen_iosapic_read,
+	.__write = xen_iosapic_write,
+};
+
+/***************************************************************************
+ * pv_ops initialization
+ */
+
+void __init
+xen_setup_pv_ops(void)
+{
+	xen_info_init();
+	pv_info = xen_info;
+	pv_init_ops = xen_init_ops;
+	pv_cpu_ops = xen_cpu_ops;
+	pv_iosapic_ops = xen_iosapic_ops;
+	pv_irq_ops = xen_irq_ops;
+	pv_time_ops = xen_time_ops;
+
+	paravirt_cpu_asm_init(&xen_cpu_asm_switch);
+}
diff --git a/arch/ia64/xen/xencomm.c b/arch/ia64/xen/xencomm.c
new file mode 100644
index 0000000..1f5d7ac
--- /dev/null
+++ b/arch/ia64/xen/xencomm.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2006 Hollis Blanchard <hollisb@us.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/mm.h>
+
+static unsigned long kernel_virtual_offset;
+static int is_xencomm_initialized;
+
+/* for xen early printk. It uses console io hypercall which uses xencomm.
+ * However early printk may use it before xencomm initialization.
+ */
+int
+xencomm_is_initialized(void)
+{
+	return is_xencomm_initialized;
+}
+
+void
+xencomm_initialize(void)
+{
+	kernel_virtual_offset = KERNEL_START - ia64_tpa(KERNEL_START);
+	is_xencomm_initialized = 1;
+}
+
+/* Translate virtual address to physical address.  */
+unsigned long
+xencomm_vtop(unsigned long vaddr)
+{
+	struct page *page;
+	struct vm_area_struct *vma;
+
+	if (vaddr == 0)
+		return 0UL;
+
+	if (REGION_NUMBER(vaddr) == 5) {
+		pgd_t *pgd;
+		pud_t *pud;
+		pmd_t *pmd;
+		pte_t *ptep;
+
+		/* On ia64, TASK_SIZE refers to current.  It is not initialized
+		   during boot.
+		   Furthermore the kernel is relocatable and __pa() doesn't
+		   work on  addresses.  */
+		if (vaddr >= KERNEL_START
+		    && vaddr < (KERNEL_START + KERNEL_TR_PAGE_SIZE))
+			return vaddr - kernel_virtual_offset;
+
+		/* In kernel area -- virtually mapped.  */
+		pgd = pgd_offset_k(vaddr);
+		if (pgd_none(*pgd) || pgd_bad(*pgd))
+			return ~0UL;
+
+		pud = pud_offset(pgd, vaddr);
+		if (pud_none(*pud) || pud_bad(*pud))
+			return ~0UL;
+
+		pmd = pmd_offset(pud, vaddr);
+		if (pmd_none(*pmd) || pmd_bad(*pmd))
+			return ~0UL;
+
+		ptep = pte_offset_kernel(pmd, vaddr);
+		if (!ptep)
+			return ~0UL;
+
+		return (pte_val(*ptep) & _PFN_MASK) | (vaddr & ~PAGE_MASK);
+	}
+
+	if (vaddr > TASK_SIZE) {
+		/* percpu variables */
+		if (REGION_NUMBER(vaddr) == 7 &&
+		    REGION_OFFSET(vaddr) >= (1ULL << IA64_MAX_PHYS_BITS))
+			ia64_tpa(vaddr);
+
+		/* kernel address */
+		return __pa(vaddr);
+	}
+
+	/* XXX double-check (lack of) locking */
+	vma = find_extend_vma(current->mm, vaddr);
+	if (!vma)
+		return ~0UL;
+
+	/* We assume the page is modified.  */
+	page = follow_page(vma, vaddr, FOLL_WRITE | FOLL_TOUCH);
+	if (!page)
+		return ~0UL;
+
+	return (page_to_pfn(page) << PAGE_SHIFT) | (vaddr & ~PAGE_MASK);
+}
diff --git a/arch/ia64/xen/xenivt.S b/arch/ia64/xen/xenivt.S
new file mode 100644
index 0000000..3e71d50
--- /dev/null
+++ b/arch/ia64/xen/xenivt.S
@@ -0,0 +1,52 @@
+/*
+ * arch/ia64/xen/ivt.S
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *	Dan Magenheimer <dan.magenheimer@hp.com>
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *                    pv_ops.
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/kregs.h>
+#include <asm/pgtable.h>
+
+#include "../kernel/minstate.h"
+
+	.section .text,"ax"
+GLOBAL_ENTRY(xen_event_callback)
+	mov r31=pr		// prepare to save predicates
+	;;
+	SAVE_MIN_WITH_COVER	// uses r31; defines r2 and r3
+	;;
+	movl r3=XSI_PSR_IC
+	mov r14=1
+	;;
+	st4 [r3]=r14
+	;;
+	adds r3=8,r2		// set up second base pointer for SAVE_REST
+	srlz.i			// ensure everybody knows psr.ic is back on
+	;;
+	SAVE_REST
+	;;
+1:
+	alloc r14=ar.pfs,0,0,1,0 // must be first in an insn group
+	add out0=16,sp		// pass pointer to pt_regs as first arg
+	;;
+	br.call.sptk.many b0=xen_evtchn_do_upcall
+	;;
+	movl r20=XSI_PSR_I_ADDR
+	;;
+	ld8 r20=[r20]
+	;;
+	adds r20=-1,r20		// vcpu_info->evtchn_upcall_pending
+	;;
+	ld1 r20=[r20]
+	;;
+	cmp.ne p6,p0=r20,r0	// if there are pending events,
+	(p6) br.spnt.few 1b	// call evtchn_do_upcall again.
+	br.sptk.many xen_leave_kernel	// we know ia64_leave_kernel is
+					// paravirtualized as xen_leave_kernel
+END(xen_event_callback)
diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S
new file mode 100644
index 0000000..28fed1f
--- /dev/null
+++ b/arch/ia64/xen/xensetup.S
@@ -0,0 +1,83 @@
+/*
+ * Support routines for Xen
+ *
+ * Copyright (C) 2005 Dan Magenheimer <dan.magenheimer@hp.com>
+ */
+
+#include <asm/processor.h>
+#include <asm/asmmacro.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/paravirt.h>
+#include <asm/xen/privop.h>
+#include <linux/elfnote.h>
+#include <linux/init.h>
+#include <xen/interface/elfnote.h>
+
+	.section .data.read_mostly
+	.align 8
+	.global xen_domain_type
+xen_domain_type:
+	data4 XEN_NATIVE_ASM
+	.previous
+
+	__INIT
+ENTRY(startup_xen)
+	// Calculate load offset.
+	// The constant, LOAD_OFFSET, can't be used because the boot
+	// loader doesn't always load to the LMA specified by the vmlinux.lds.
+	mov r9=ip	// must be the first instruction to make sure
+			// that r9 = the physical address of startup_xen.
+			// Usually r9 = startup_xen - LOAD_OFFSET
+	movl r8=startup_xen
+	;;
+	sub r9=r9,r8	// Usually r9 = -LOAD_OFFSET.
+
+	mov r10=PARAVIRT_HYPERVISOR_TYPE_XEN
+	movl r11=_start
+	;;
+	add r11=r11,r9
+	movl r8=hypervisor_type
+	;;
+	add r8=r8,r9
+	mov b0=r11
+	;;
+	st8 [r8]=r10
+	br.cond.sptk.many b0
+	;;
+END(startup_xen)
+
+	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,	.asciz "linux")
+	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION,	.asciz "2.6")
+	ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,	.asciz "xen-3.0")
+	ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,		data8.ua startup_xen - LOAD_OFFSET)
+
+#define isBP	p3	// are we the Bootstrap Processor?
+
+	.text
+
+GLOBAL_ENTRY(xen_setup_hook)
+	mov r8=XEN_PV_DOMAIN_ASM
+(isBP)	movl r9=xen_domain_type;;
+(isBP)	st4 [r9]=r8
+	movl r10=xen_ivt;;
+
+	mov cr.iva=r10
+
+	/* Set xsi base.  */
+#define FW_HYPERCALL_SET_SHARED_INFO_VA			0x600
+(isBP)	mov r2=FW_HYPERCALL_SET_SHARED_INFO_VA
+(isBP)	movl r28=XSI_BASE;;
+(isBP)	break 0x1000;;
+
+	/* setup pv_ops */
+(isBP)	mov r4=rp
+	;;
+(isBP)	br.call.sptk.many rp=xen_setup_pv_ops
+	;;
+(isBP)	mov rp=r4
+	;;
+
+	br.ret.sptk.many rp
+	;;
+END(xen_setup_hook)
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index a5f864c..dbaed4a 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -36,15 +36,14 @@ config NO_IOPORT
 config NO_DMA
 	def_bool y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 config HZ
 	int
 	default 100
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 
 menu "Processor type and features"
 
@@ -216,10 +215,6 @@ config MEMORY_SIZE
 	default "01000000" if PLAT_M32104UT
 	default "00800000" if PLAT_OAKS32R
 
-config NOHIGHMEM
-	bool
-	default y
-
 config ARCH_DISCONTIGMEM_ENABLE
 	bool "Internal RAM Support"
 	depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
@@ -410,11 +405,7 @@ config PCI_DIRECT
 source "drivers/pci/Kconfig"
 
 config ISA
-	bool "ISA support"
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  If you have ISA, say Y, otherwise N.
+	bool
 
 source "drivers/pcmcia/Kconfig"
 
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index d4eaa2f..612d35b 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -143,7 +143,7 @@ ret_from_intr:
 	and3	r4, r4, #0x8000		; check BSM bit
 #endif
 	beqz	r4, resume_kernel
-ENTRY(resume_userspace)
+resume_userspace:
 	DISABLE_INTERRUPTS(r4)		; make sure we don't miss an interrupt
 					; setting need_resched or sigpending
 					; between sampling and the iret
diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
index dab7436..4018077 100644
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@@ -29,7 +29,6 @@ __INITDATA
 	.global _end
 ENTRY(stext)
 ENTRY(_stext)
-ENTRY(startup_32)
 	/* Setup up the stack pointer */
 	LDIMM	(r0, spi_stack_top)
 	LDIMM	(r1, spu_stack_top)
diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c
index d0c5b0b..2aeae46 100644
--- a/arch/m32r/kernel/irq.c
+++ b/arch/m32r/kernel/irq.c
@@ -22,9 +22,6 @@
 #include <linux/module.h>
 #include <asm/uaccess.h>
 
-atomic_t irq_err_count;
-atomic_t irq_mis_count;
-
 /*
  * Generic, controller-independent functions:
  */
@@ -63,9 +60,6 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_putc(p, '\n');
 skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
 	}
 	return 0;
 }
diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index 16bcb18..22624b5 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -14,6 +14,7 @@
 #include <asm/delay.h>
 #include <asm/irq.h>
 #include <asm/tlbflush.h>
+#include <asm/pgtable.h>
 
 /* platform dependent support */
 EXPORT_SYMBOL(boot_cpu_data);
@@ -65,6 +66,7 @@ EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(empty_zero_page);
 
 EXPORT_SYMBOL(_inb);
 EXPORT_SYMBOL(_inw);
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index a689e29..7103d91 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -11,7 +11,7 @@
 #undef DEBUG_PROCESS
 #ifdef DEBUG_PROCESS
 #define DPRINTK(fmt, args...)  printk("%s:%d:%s: " fmt, __FILE__, __LINE__, \
-  __FUNCTION__, ##args)
+  __func__, ##args)
 #else
 #define DPRINTK(fmt, args...)
 #endif
@@ -35,8 +35,6 @@
 
 #include <linux/err.h>
 
-static int hlt_counter=0;
-
 /*
  * Return saved PC of a blocked thread.
  */
@@ -48,31 +46,16 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 /*
  * Powermanagement idle function, if any..
  */
-void (*pm_idle)(void) = NULL;
-EXPORT_SYMBOL(pm_idle);
+static void (*pm_idle)(void) = NULL;
 
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
 /*
  * We use this is we don't have any better
  * idle routine..
  */
-void default_idle(void)
+static void default_idle(void)
 {
 	/* M32R_FIXME: Please use "cpu_sleep" mode.  */
 	cpu_relax();
@@ -260,15 +243,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long spu,
 	return 0;
 }
 
-/*
- * Capture the user space registers if the task is not running (in user space)
- */
-int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
-{
-	/* M32R_FIXME */
-	return 1;
-}
-
 asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2,
 	unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6,
 	struct pt_regs regs)
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index 7577f97..929e5c9d 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -84,7 +84,7 @@ void smp_send_timer(void);
 void smp_ipi_timer_interrupt(struct pt_regs *);
 void smp_local_timer_interrupt(void);
 
-void send_IPI_allbutself(int, int);
+static void send_IPI_allbutself(int, int);
 static void send_IPI_mask(cpumask_t, int, int);
 unsigned long send_IPI_mask_phys(cpumask_t, int, int);
 
@@ -722,7 +722,7 @@ void smp_local_timer_interrupt(void)
  * ---------- --- --------------------------------------------------------
  *
  *==========================================================================*/
-void send_IPI_allbutself(int ipi_num, int try)
+static void send_IPI_allbutself(int ipi_num, int try)
 {
 	cpumask_t cpumask;
 
diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c
index 2c03ac1..39cb6da 100644
--- a/arch/m32r/kernel/smpboot.c
+++ b/arch/m32r/kernel/smpboot.c
@@ -40,6 +40,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/cpu.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -498,6 +499,8 @@ static void __init smp_online(void)
 {
 	int cpu_id = smp_processor_id();
 
+	notify_cpu_starting(cpu_id);
+
 	local_irq_enable();
 
 	/* Get our bogomips. */
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 994cc15..6ea0177 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -34,7 +34,6 @@
 #include <asm/hw_irq.h>
 
 #ifdef CONFIG_SMP
-extern void send_IPI_allbutself(int, int);
 extern void smp_local_timer_interrupt(void);
 #endif
 
@@ -188,7 +187,7 @@ static long last_rtc_update = 0;
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 #ifndef CONFIG_SMP
 	profile_tick(CPU_PROFILING);
@@ -228,7 +227,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-struct irqaction irq0 = {
+static struct irqaction irq0 = {
 	.handler = timer_interrupt,
 	.flags = IRQF_DISABLED,
 	.mask = CPU_MASK_NONE,
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 46159a4..03b14e5 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -61,7 +61,7 @@ extern unsigned long	eit_vector[];
 	((unsigned long)func - (unsigned long)eit_vector - entry*4)/4 \
 	+ 0xff000000UL
 
-void	set_eit_vector_entries(void)
+static void set_eit_vector_entries(void)
 {
 	extern void default_eit_handler(void);
 	extern void system_call(void);
@@ -121,9 +121,9 @@ void __init trap_init(void)
 	cpu_init();
 }
 
-int kstack_depth_to_print = 24;
+static int kstack_depth_to_print = 24;
 
-void show_trace(struct task_struct *task, unsigned long *stack)
+static void show_trace(struct task_struct *task, unsigned long *stack)
 {
 	unsigned long addr;
 
@@ -224,7 +224,7 @@ bad:
 	printk("\n");
 }
 
-DEFINE_SPINLOCK(die_lock);
+static DEFINE_SPINLOCK(die_lock);
 
 void die(const char * str, struct pt_regs * regs, long err)
 {
diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c
index 59bfc34..ced549b 100644
--- a/arch/m32r/lib/delay.c
+++ b/arch/m32r/lib/delay.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/param.h>
+#include <linux/module.h>
 #ifdef CONFIG_SMP
 #include <linux/sched.h>
 #include <asm/current.h>
@@ -121,3 +122,4 @@ void __ndelay(unsigned long nsecs)
 {
 	__const_udelay(nsecs * 0x00005);  /* 2**32 / 1000000000 (rounded up) */
 }
+EXPORT_SYMBOL(__ndelay);
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index cbc3c4c..7daf897 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -111,9 +111,9 @@ unsigned long __init setup_memory(void)
 				initrd_start, INITRD_SIZE);
 		} else {
 			printk("initrd extends beyond end of memory "
-				"(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+				"(0x%08lx > 0x%08llx)\ndisabling initrd\n",
 				INITRD_START + INITRD_SIZE,
-				PFN_PHYS(max_low_pfn));
+			        (unsigned long long)PFN_PHYS(max_low_pfn));
 
 			initrd_start = 0;
 		}
diff --git a/arch/m32r/oprofile/init.c b/arch/m32r/oprofile/init.c
index b7773e4..fa56860 100644
--- a/arch/m32r/oprofile/init.c
+++ b/arch/m32r/oprofile/init.c
@@ -12,7 +12,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	return -ENODEV;
 }
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 8c5e1de..836fb66 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -5,6 +5,7 @@
 config M68K
 	bool
 	default y
+	select HAVE_AOUT
 	select HAVE_IDE
 
 config MMU
@@ -53,9 +54,6 @@ config NO_IOPORT
 config NO_DMA
 	def_bool SUN3
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 config HZ
 	int
 	default 100
@@ -64,6 +62,8 @@ mainmenu "Linux/68k Kernel Configuration"
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "Platform dependent setup"
 
 config EISA
@@ -107,21 +107,9 @@ config PCMCIA
 	  To compile this driver as modules, choose M here: the
 	  modules will be called pcmcia_core and ds.
 
-config SUN3
-	bool "Sun3 support"
-	select M68020
-	select MMU_SUN3 if MMU
-	help
-	  This option enables support for the Sun 3 series of workstations
-	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
-	  that all other hardware types must be disabled, as Sun 3 kernels
-	  are incompatible with all other m68k targets (including Sun 3x!).
-
-	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
 config AMIGA
 	bool "Amiga support"
-	depends on !MMU_SUN3
+	select MMU_MOTOROLA if MMU
 	help
 	  This option enables support for the Amiga series of computers. If
 	  you plan to use this kernel on an Amiga, say Y here and browse the
@@ -129,33 +117,16 @@ config AMIGA
 
 config ATARI
 	bool "Atari support"
-	depends on !MMU_SUN3
+	select MMU_MOTOROLA if MMU
 	help
 	  This option enables support for the 68000-based Atari series of
 	  computers (including the TT, Falcon and Medusa). If you plan to use
 	  this kernel on an Atari, say Y here and browse the material
 	  available in <file:Documentation/m68k>; otherwise say N.
 
-config HADES
-	bool "Hades support"
-	depends on ATARI && BROKEN
-	help
-	  This option enables support for the Hades Atari clone. If you plan
-	  to use this kernel on a Hades, say Y here; otherwise say N.
-
-config PCI
-	bool
-	depends on HADES
-	default y
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
 config MAC
 	bool "Macintosh support"
-	depends on !MMU_SUN3
+	select MMU_MOTOROLA if MMU
 	help
 	  This option enables support for the Apple Macintosh series of
 	  computers (yes, there is experimental support now, at least for part
@@ -176,14 +147,14 @@ config M68K_L2_CACHE
 
 config APOLLO
 	bool "Apollo support"
-	depends on !MMU_SUN3
+	select MMU_MOTOROLA if MMU
 	help
 	  Say Y here if you want to run Linux on an MC680x0-based Apollo
 	  Domain workstation such as the DN3500.
 
 config VME
 	bool "VME (Motorola and BVM) support"
-	depends on !MMU_SUN3
+	select MMU_MOTOROLA if MMU
 	help
 	  Say Y here if you want to build a kernel for a 680x0 based VME
 	  board.  Boards currently supported include Motorola boards MVME147,
@@ -220,7 +191,7 @@ config BVME6000
 
 config HP300
 	bool "HP9000/300 and HP9000/400 support"
-	depends on !MMU_SUN3
+	select MMU_MOTOROLA if MMU
 	help
 	  This option enables support for the HP9000/300 and HP9000/400 series
 	  of workstations. Support for these machines is still somewhat
@@ -239,7 +210,7 @@ config DIO
 
 config SUN3X
 	bool "Sun3x support"
-	depends on !MMU_SUN3
+	select MMU_MOTOROLA if MMU
 	select M68030
 	help
 	  This option enables support for the Sun 3x series of workstations.
@@ -252,7 +223,7 @@ config SUN3X
 
 config Q40
 	bool "Q40/Q60 support"
-	depends on !MMU_SUN3
+	select MMU_MOTOROLA if MMU
 	help
 	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
 	  manufactured in Germany.  There is an official Q40 home page at
@@ -260,6 +231,19 @@ config Q40
 	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
 	  emulation.
 
+config SUN3
+	bool "Sun3 support"
+	depends on !MMU_MOTOROLA
+	select MMU_SUN3 if MMU
+	select M68020
+	help
+	  This option enables support for the Sun 3 series of workstations
+	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
+	  that all other hardware types must be disabled, as Sun 3 kernels
+	  are incompatible with all other m68k targets (including Sun 3x!).
+
+	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
+
 comment "Processor type"
 
 config M68020
@@ -297,10 +281,10 @@ config M68060
 config MMU_MOTOROLA
 	bool
 	depends on MMU && !MMU_SUN3
-	default y
 
 config MMU_SUN3
 	bool
+	depends on MMU && !MMU_MOTOROLA
 
 config M68KFPU_EMU
 	bool "Math emulation support (EXPERIMENTAL)"
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index df679d9..ab9862c 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/rtc.h>
@@ -24,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/zorro.h>
 #include <linux/module.h>
+#include <linux/keyboard.h>
 
 #include <asm/bootinfo.h>
 #include <asm/setup.h>
@@ -92,7 +94,7 @@ static char amiga_model_name[13] = "Amiga ";
 
 static void amiga_sched_init(irq_handler_t handler);
 static void amiga_get_model(char *model);
-static int amiga_get_hardware_list(char *buffer);
+static void amiga_get_hardware_list(struct seq_file *m);
 /* amiga specific timer functions */
 static unsigned long amiga_gettimeoffset(void);
 static int a3000_hwclk(int, struct rtc_time *);
@@ -910,13 +912,11 @@ static void amiga_get_model(char *model)
 }
 
 
-static int amiga_get_hardware_list(char *buffer)
+static void amiga_get_hardware_list(struct seq_file *m)
 {
-	int len = 0;
-
 	if (AMIGAHW_PRESENT(CHIP_RAM))
-		len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
-	len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
+		seq_printf(m, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
+	seq_printf(m, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
 			amiga_psfreq, amiga_eclock);
 	if (AMIGAHW_PRESENT(AMI_VIDEO)) {
 		char *type;
@@ -934,14 +934,14 @@ static int amiga_get_hardware_list(char *buffer)
 			type = "Old or Unknown";
 			break;
 		}
-		len += sprintf(buffer+len, "Graphics:\t%s\n", type);
+		seq_printf(m, "Graphics:\t%s\n", type);
 	}
 
 #define AMIGAHW_ANNOUNCE(name, str)			\
 	if (AMIGAHW_PRESENT(name))			\
-		len += sprintf (buffer+len, "\t%s\n", str)
+		seq_printf (m, "\t%s\n", str)
 
-	len += sprintf (buffer + len, "Detected hardware:\n");
+	seq_printf (m, "Detected hardware:\n");
 
 	AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
 	AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
@@ -974,13 +974,19 @@ static int amiga_get_hardware_list(char *buffer)
 	AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
 #ifdef CONFIG_ZORRO
 	if (AMIGAHW_PRESENT(ZORRO))
-		len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
+		seq_printf(m, "\tZorro II%s AutoConfig: %d Expansion "
 				"Device%s\n",
 				AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
 				zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
 #endif /* CONFIG_ZORRO */
 
 #undef AMIGAHW_ANNOUNCE
-
-	return len;
 }
+
+/*
+ * The Amiga keyboard driver needs key_maps, but we cannot export it in
+ * drivers/char/defkeymap.c, as it is autogenerated
+ */
+#ifdef CONFIG_HW_CONSOLE
+EXPORT_SYMBOL_GPL(key_maps);
+#endif
diff --git a/arch/m68k/atari/Makefile b/arch/m68k/atari/Makefile
index 2cd905e..0cac723 100644
--- a/arch/m68k/atari/Makefile
+++ b/arch/m68k/atari/Makefile
@@ -5,7 +5,4 @@
 obj-y		:= config.o time.o debug.o ataints.o stdma.o \
 			atasound.o stram.o
 
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_HADES)	+= hades-pci.o
-endif
 obj-$(CONFIG_ATARI_KBD_CORE)	+= atakeyb.o
diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c
index b45593a..dba4afa 100644
--- a/arch/m68k/atari/ataints.c
+++ b/arch/m68k/atari/ataints.c
@@ -407,10 +407,8 @@ void __init atari_init_IRQ(void)
 		 * gets overruns)
 		 */
 
-		if (!MACH_IS_HADES) {
-			vectors[VEC_INT2] = falcon_hblhandler;
-			vectors[VEC_INT4] = falcon_hblhandler;
-		}
+		vectors[VEC_INT2] = falcon_hblhandler;
+		vectors[VEC_INT4] = falcon_hblhandler;
 	}
 
 	if (ATARIHW_PRESENT(PCM_8BIT) && ATARIHW_PRESENT(MICROWIRE)) {
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index bb959fb..c038b7c 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -635,15 +635,3 @@ int atari_keyb_init(void)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(atari_keyb_init);
-
-int atari_kbd_translate(unsigned char keycode, unsigned char *keycodep, char raw_mode)
-{
-#ifdef CONFIG_MAGIC_SYSRQ
-	/* ALT+HELP pressed? */
-	if ((keycode == 98) && ((shift_state & 0xff) == 8))
-		*keycodep = 0xff;
-	else
-#endif
-		*keycodep = keycode;
-	return 1;
-}
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 5945e15..49c28cd 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -26,6 +26,7 @@
 
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -63,7 +64,7 @@ int atari_rtc_year_offset;
 /* local function prototypes */
 static void atari_reset(void);
 static void atari_get_model(char *model);
-static int atari_get_hardware_list(char *buffer);
+static void atari_get_hardware_list(struct seq_file *m);
 
 /* atari specific irq functions */
 extern void atari_init_IRQ (void);
@@ -231,7 +232,7 @@ void __init config_atari(void)
 	 */
 
 	printk("Atari hardware found: ");
-	if (MACH_IS_MEDUSA || MACH_IS_HADES) {
+	if (MACH_IS_MEDUSA) {
 		/* There's no Atari video hardware on the Medusa, but all the
 		 * addresses below generate a DTACK so no bus error occurs! */
 	} else if (hwreg_present(f030_xreg)) {
@@ -269,10 +270,6 @@ void __init config_atari(void)
 		ATARIHW_SET(SCSI_DMA);
 		printk("TT_SCSI_DMA ");
 	}
-	if (!MACH_IS_HADES && hwreg_present(&st_dma.dma_hi)) {
-		ATARIHW_SET(STND_DMA);
-		printk("STND_DMA ");
-	}
 	/*
 	 * The ST-DMA address registers aren't readable
 	 * on all Medusas, so the test below may fail
@@ -294,12 +291,11 @@ void __init config_atari(void)
 		ATARIHW_SET(YM_2149);
 		printk("YM2149 ");
 	}
-	if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
-		hwreg_present(&tt_dmasnd.ctrl)) {
+	if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
 		ATARIHW_SET(PCM_8BIT);
 		printk("PCM ");
 	}
-	if (!MACH_IS_HADES && hwreg_present(&falcon_codec.unused5)) {
+	if (hwreg_present(&falcon_codec.unused5)) {
 		ATARIHW_SET(CODEC);
 		printk("CODEC ");
 	}
@@ -313,7 +309,7 @@ void __init config_atari(void)
 	    (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
 	    (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
 #else
-	    !MACH_IS_MEDUSA && !MACH_IS_HADES
+	    !MACH_IS_MEDUSA
 #endif
 	    ) {
 		ATARIHW_SET(SCC_DMA);
@@ -327,10 +323,7 @@ void __init config_atari(void)
 		ATARIHW_SET(ST_ESCC);
 		printk("ST_ESCC ");
 	}
-	if (MACH_IS_HADES) {
-		ATARIHW_SET(VME);
-		printk("VME ");
-	} else if (hwreg_present(&tt_scu.sys_mask)) {
+	if (hwreg_present(&tt_scu.sys_mask)) {
 		ATARIHW_SET(SCU);
 		/* Assume a VME bus if there's a SCU */
 		ATARIHW_SET(VME);
@@ -340,7 +333,7 @@ void __init config_atari(void)
 		ATARIHW_SET(ANALOG_JOY);
 		printk("ANALOG_JOY ");
 	}
-	if (!MACH_IS_HADES && hwreg_present(blitter.halftone)) {
+	if (hwreg_present(blitter.halftone)) {
 		ATARIHW_SET(BLITTER);
 		printk("BLITTER ");
 	}
@@ -349,8 +342,7 @@ void __init config_atari(void)
 		printk("IDE ");
 	}
 #if 1 /* This maybe wrong */
-	if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
-	    hwreg_present(&tt_microwire.data) &&
+	if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
 	    hwreg_present(&tt_microwire.mask) &&
 	    (tt_microwire.mask = 0x7ff,
 	     udelay(1),
@@ -369,19 +361,18 @@ void __init config_atari(void)
 		mach_hwclk = atari_tt_hwclk;
 		mach_set_clock_mmss = atari_tt_set_clock_mmss;
 	}
-	if (!MACH_IS_HADES && hwreg_present(&mste_rtc.sec_ones)) {
+	if (hwreg_present(&mste_rtc.sec_ones)) {
 		ATARIHW_SET(MSTE_CLK);
 		printk("MSTE_CLK ");
 		mach_hwclk = atari_mste_hwclk;
 		mach_set_clock_mmss = atari_mste_set_clock_mmss;
 	}
-	if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
-	    hwreg_present(&dma_wd.fdc_speed) &&
+	if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
 	    hwreg_write(&dma_wd.fdc_speed, 0)) {
 		ATARIHW_SET(FDCSPEED);
 		printk("FDC_SPEED ");
 	}
-	if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) {
+	if (!ATARIHW_PRESENT(ST_SCSI)) {
 		ATARIHW_SET(ACSI);
 		printk("ACSI ");
 	}
@@ -449,7 +440,7 @@ void __init config_atari(void)
 	 * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
 	 * in the last 16MB of the address space.
 	 */
-	tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ?
+	tos_version = (MACH_IS_MEDUSA) ?
 			0xfff : *(unsigned short *)0xff000002;
 	atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
 }
@@ -511,8 +502,7 @@ static void atari_reset(void)
 	 * On the Medusa, phys. 0x4 may contain garbage because it's no
 	 * ROM.  See above for explanation why we cannot use PTOV(4).
 	 */
-	reset_addr = MACH_IS_HADES ? 0x7fe00030 :
-		     MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
+	reset_addr = MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
 		     *(unsigned long *) 0xff000004;
 
 	/* reset ACIA for switch off OverScan, if it's active */
@@ -606,8 +596,6 @@ static void atari_get_model(char *model)
 		if (MACH_IS_MEDUSA)
 			/* Medusa has TT _MCH cookie */
 			strcat(model, "Medusa");
-		else if (MACH_IS_HADES)
-			strcat(model, "Hades");
 		else
 			strcat(model, "TT");
 		break;
@@ -624,21 +612,21 @@ static void atari_get_model(char *model)
 }
 
 
-static int atari_get_hardware_list(char *buffer)
+static void atari_get_hardware_list(struct seq_file *m)
 {
-	int len = 0, i;
+	int i;
 
 	for (i = 0; i < m68k_num_memory; i++)
-		len += sprintf(buffer+len, "\t%3ld MB at 0x%08lx (%s)\n",
+		seq_printf(m, "\t%3ld MB at 0x%08lx (%s)\n",
 				m68k_memory[i].size >> 20, m68k_memory[i].addr,
 				(m68k_memory[i].addr & 0xff000000 ?
 				 "alternate RAM" : "ST-RAM"));
 
 #define ATARIHW_ANNOUNCE(name, str)			\
 	if (ATARIHW_PRESENT(name))			\
-		len += sprintf(buffer + len, "\t%s\n", str)
+		seq_printf(m, "\t%s\n", str)
 
-	len += sprintf(buffer + len, "Detected hardware:\n");
+	seq_printf(m, "Detected hardware:\n");
 	ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
 	ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
 	ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
@@ -667,6 +655,4 @@ static int atari_get_hardware_list(char *buffer)
 	ATARIHW_ANNOUNCE(BLITTER, "Blitter");
 	ATARIHW_ANNOUNCE(VME, "VME Bus");
 	ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
-
-	return len;
 }
diff --git a/arch/m68k/atari/hades-pci.c b/arch/m68k/atari/hades-pci.c
deleted file mode 100644
index 2bbabc0..0000000
--- a/arch/m68k/atari/hades-pci.c
+++ /dev/null
@@ -1,440 +0,0 @@
-/*
- * hades-pci.c - Hardware specific PCI BIOS functions the Hades Atari clone.
- *
- * Written by Wout Klaren.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#if 0
-# define DBG_DEVS(args)		printk args
-#else
-# define DBG_DEVS(args)
-#endif
-
-#if defined(CONFIG_PCI) && defined(CONFIG_HADES)
-
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/byteorder.h>
-#include <asm/pci.h>
-
-#define HADES_MEM_BASE		0x80000000
-#define HADES_MEM_SIZE		0x20000000
-#define HADES_CONFIG_BASE	0xA0000000
-#define HADES_CONFIG_SIZE	0x10000000
-#define HADES_IO_BASE		0xB0000000
-#define HADES_IO_SIZE		0x10000000
-#define HADES_VIRT_IO_SIZE	0x00010000	/* Only 64k is remapped and actually used. */
-
-#define N_SLOTS				4			/* Number of PCI slots. */
-
-static const char pci_mem_name[] = "PCI memory space";
-static const char pci_io_name[] = "PCI I/O space";
-static const char pci_config_name[] = "PCI config space";
-
-static struct resource config_space = {
-    .name = pci_config_name,
-    .start = HADES_CONFIG_BASE,
-    .end = HADES_CONFIG_BASE + HADES_CONFIG_SIZE - 1
-};
-static struct resource io_space = {
-    .name = pci_io_name,
-    .start = HADES_IO_BASE,
-    .end = HADES_IO_BASE + HADES_IO_SIZE - 1
-};
-
-static const unsigned long pci_conf_base_phys[] = {
-    0xA0080000, 0xA0040000, 0xA0020000, 0xA0010000
-};
-static unsigned long pci_conf_base_virt[N_SLOTS];
-static unsigned long pci_io_base_virt;
-
-/*
- * static void *mk_conf_addr(unsigned char bus, unsigned char device_fn,
- *			     unsigned char where)
- *
- * Calculate the address of the PCI configuration area of the given
- * device.
- *
- * BUG: boards with multiple functions are probably not correctly
- * supported.
- */
-
-static void *mk_conf_addr(struct pci_dev *dev, int where)
-{
-	int device = dev->devfn >> 3, function = dev->devfn & 7;
-	void *result;
-
-	DBG_DEVS(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, pci_addr=0x%p)\n",
-		  dev->bus->number, dev->devfn, where, pci_addr));
-
-	if (device > 3)
-	{
-		DBG_DEVS(("mk_conf_addr: device (%d) > 3, returning NULL\n", device));
-		return NULL;
-	}
-
-	if (dev->bus->number != 0)
-	{
-		DBG_DEVS(("mk_conf_addr: bus (%d) > 0, returning NULL\n", device));
-		return NULL;
-	}
-
-	result = (void *) (pci_conf_base_virt[device] | (function << 8) | (where));
-	DBG_DEVS(("mk_conf_addr: returning pci_addr 0x%lx\n", (unsigned long) result));
-	return result;
-}
-
-static int hades_read_config_byte(struct pci_dev *dev, int where, u8 *value)
-{
-	volatile unsigned char *pci_addr;
-
-	*value = 0xff;
-
-	if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*value = *pci_addr;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_read_config_word(struct pci_dev *dev, int where, u16 *value)
-{
-	volatile unsigned short *pci_addr;
-
-	*value = 0xffff;
-
-	if (where & 0x1)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*value = le16_to_cpu(*pci_addr);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_read_config_dword(struct pci_dev *dev, int where, u32 *value)
-{
-	volatile unsigned int *pci_addr;
-	unsigned char header_type;
-	int result;
-
-	*value = 0xffffffff;
-
-	if (where & 0x3)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*value = le32_to_cpu(*pci_addr);
-
-	/*
-	 * Check if the value is an address on the bus. If true, add the
-	 * base address of the PCI memory or PCI I/O area on the Hades.
-	 */
-
-	if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
-					     &header_type)) != PCIBIOS_SUCCESSFUL)
-		return result;
-
-	if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
-	    ((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
-							 (where <= PCI_BASE_ADDRESS_5))))
-	{
-		if ((*value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO)
-		{
-			/*
-			 * Base address register that contains an I/O address. If the
-			 * address is valid on the Hades (0 <= *value < HADES_VIRT_IO_SIZE),
-			 * add 'pci_io_base_virt' to the value.
-			 */
-
-			if (*value < HADES_VIRT_IO_SIZE)
-				*value += pci_io_base_virt;
-		}
-		else
-		{
-			/*
-			 * Base address register that contains an memory address. If the
-			 * address is valid on the Hades (0 <= *value < HADES_MEM_SIZE),
-			 * add HADES_MEM_BASE to the value.
-			 */
-
-			if (*value == 0)
-			{
-				/*
-				 * Base address is 0. Test if this base
-				 * address register is used.
-				 */
-
-				*pci_addr = 0xffffffff;
-				if (*pci_addr != 0)
-				{
-					*pci_addr = *value;
-					if (*value < HADES_MEM_SIZE)
-						*value += HADES_MEM_BASE;
-				}
-			}
-			else
-			{
-				if (*value < HADES_MEM_SIZE)
-					*value += HADES_MEM_BASE;
-			}
-		}
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_byte(struct pci_dev *dev, int where, u8 value)
-{
-	volatile unsigned char *pci_addr;
-
-	if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*pci_addr = value;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_word(struct pci_dev *dev, int where, u16 value)
-{
-	volatile unsigned short *pci_addr;
-
-	if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*pci_addr = cpu_to_le16(value);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_dword(struct pci_dev *dev, int where, u32 value)
-{
-	volatile unsigned int *pci_addr;
-	unsigned char header_type;
-	int result;
-
-	if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * Check if the value is an address on the bus. If true, subtract the
-	 * base address of the PCI memory or PCI I/O area on the Hades.
-	 */
-
-	if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
-					     &header_type)) != PCIBIOS_SUCCESSFUL)
-		return result;
-
-	if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
-	    ((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
-							 (where <= PCI_BASE_ADDRESS_5))))
-	{
-		if ((value & PCI_BASE_ADDRESS_SPACE) ==
-		    PCI_BASE_ADDRESS_SPACE_IO)
-		{
-			/*
-			 * I/O address. Check if the address is valid address on
-			 * the Hades (pci_io_base_virt <= value < pci_io_base_virt +
-			 * HADES_VIRT_IO_SIZE) or if the value is 0xffffffff. If not
-			 * true do not write the base address register. If it is a
-			 * valid base address subtract 'pci_io_base_virt' from the value.
-			 */
-
-			if ((value >= pci_io_base_virt) && (value < (pci_io_base_virt +
-														 HADES_VIRT_IO_SIZE)))
-				value -= pci_io_base_virt;
-			else
-			{
-				if (value != 0xffffffff)
-					return PCIBIOS_SET_FAILED;
-			}
-		}
-		else
-		{
-			/*
-			 * Memory address. Check if the address is valid address on
-			 * the Hades (HADES_MEM_BASE <= value < HADES_MEM_BASE + HADES_MEM_SIZE) or
-			 * if the value is 0xffffffff. If not true do not write
-			 * the base address register. If it is a valid base address
-			 * subtract HADES_MEM_BASE from the value.
-			 */
-
-			if ((value >= HADES_MEM_BASE) && (value < (HADES_MEM_BASE + HADES_MEM_SIZE)))
-				value -= HADES_MEM_BASE;
-			else
-			{
-				if (value != 0xffffffff)
-					return PCIBIOS_SET_FAILED;
-			}
-		}
-	}
-
-	*pci_addr = cpu_to_le32(value);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * static inline void hades_fixup(void)
- *
- * Assign IRQ numbers as used by Linux to the interrupt pins
- * of the PCI cards.
- */
-
-static void __init hades_fixup(int pci_modify)
-{
-	char irq_tab[4] = {
-		[0] = IRQ_TT_MFP_IO0,		/* Slot 0. */
-		[1] = IRQ_TT_MFP_IO1,		/* Slot 1. */
-		[2] = IRQ_TT_MFP_SCC,		/* Slot 2. */
-		[3] = IRQ_TT_MFP_SCSIDMA	/* Slot 3. */
-	};
-	struct pci_dev *dev = NULL;
-	unsigned char slot;
-
-	/*
-	 * Go through all devices, fixing up irqs as we see fit:
-	 */
-
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
-	{
-		if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE)
-		{
-			slot = PCI_SLOT(dev->devfn);	/* Determine slot number. */
-			dev->irq = irq_tab[slot];
-			if (pci_modify)
-				pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-		}
-	}
-}
-
-/*
- * static void hades_conf_device(struct pci_dev *dev)
- *
- * Machine dependent Configure the given device.
- *
- * Parameters:
- *
- * dev		- the pci device.
- */
-
-static void __init hades_conf_device(struct pci_dev *dev)
-{
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
-}
-
-static struct pci_ops hades_pci_ops = {
-	.read_byte =	hades_read_config_byte,
-	.read_word =	hades_read_config_word,
-	.read_dword =	hades_read_config_dword,
-	.write_byte =	hades_write_config_byte,
-	.write_word =	hades_write_config_word,
-	.write_dword =	hades_write_config_dword
-};
-
-/*
- * struct pci_bus_info *init_hades_pci(void)
- *
- * Machine specific initialisation:
- *
- * - Allocate and initialise a 'pci_bus_info' structure
- * - Initialise hardware
- *
- * Result: pointer to 'pci_bus_info' structure.
- */
-
-struct pci_bus_info * __init init_hades_pci(void)
-{
-	struct pci_bus_info *bus;
-	int i;
-
-	/*
-	 * Remap I/O and configuration space.
-	 */
-
-	pci_io_base_virt = (unsigned long) ioremap(HADES_IO_BASE, HADES_VIRT_IO_SIZE);
-
-	for (i = 0; i < N_SLOTS; i++)
-		pci_conf_base_virt[i] = (unsigned long) ioremap(pci_conf_base_phys[i], 0x10000);
-
-	/*
-	 * Allocate memory for bus info structure.
-	 */
-
-	bus = kzalloc(sizeof(struct pci_bus_info), GFP_KERNEL);
-	if (unlikely(!bus))
-		goto iounmap_base_virt;
-
-	/*
-	 * Claim resources. The m68k has no separate I/O space, both
-	 * PCI memory space and PCI I/O space are in memory space. Therefore
-	 * the I/O resources are requested in memory space as well.
-	 */
-
-	if (unlikely(request_resource(&iomem_resource, &config_space) != 0))
-		goto free_bus;
-
-	if (unlikely(request_resource(&iomem_resource, &io_space) != 0))
-		goto release_config_space;
-
-	bus->mem_space.start = HADES_MEM_BASE;
-	bus->mem_space.end = HADES_MEM_BASE + HADES_MEM_SIZE - 1;
-	bus->mem_space.name = pci_mem_name;
-#if 1
-	if (unlikely(request_resource(&iomem_resource, &bus->mem_space) != 0))
-		goto release_io_space;
-#endif
-	bus->io_space.start = pci_io_base_virt;
-	bus->io_space.end = pci_io_base_virt + HADES_VIRT_IO_SIZE - 1;
-	bus->io_space.name = pci_io_name;
-#if 1
-	if (unlikely(request_resource(&ioport_resource, &bus->io_space) != 0))
-		goto release_bus_mem_space;
-#endif
-	/*
-	 * Set hardware dependent functions.
-	 */
-
-	bus->m68k_pci_ops = &hades_pci_ops;
-	bus->fixup = hades_fixup;
-	bus->conf_device = hades_conf_device;
-
-	/*
-	 * Select high to low edge for PCI interrupts.
-	 */
-
-	tt_mfp.active_edge &= ~0x27;
-
-	return bus;
-
-release_bus_mem_space:
-	release_resource(&bus->mem_space);
-release_io_space:
-	release_resource(&io_space);
-release_config_space:
-	release_resource(&config_space);
-free_bus:
-	kfree(bus);
-iounmap_base_virt:
-	iounmap((void *)pci_io_base_virt);
-
-	for (i = 0; i < N_SLOTS; i++)
-		iounmap((void *)pci_conf_base_virt[i]);
-
-	return NULL;
-}
-#endif
diff --git a/arch/m68k/atari/stram.c b/arch/m68k/atari/stram.c
index 04c69ff..6ec3b7f 100644
--- a/arch/m68k/atari/stram.c
+++ b/arch/m68k/atari/stram.c
@@ -42,6 +42,7 @@
 /* abbrev for the && above... */
 #define DO_PROC
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #endif
 
 /*
@@ -323,19 +324,16 @@ static int remove_region( BLOCK *block )
 
 #ifdef DO_PROC
 
-#define	PRINT_PROC(fmt,args...) len += sprintf( buf+len, fmt, ##args )
+#define	PRINT_PROC(fmt,args...) seq_printf( m, fmt, ##args )
 
-int get_stram_list( char *buf )
+static int stram_proc_show(struct seq_file *m, void *v)
 {
-	int len = 0;
 	BLOCK *p;
 
 	PRINT_PROC("Total ST-RAM:      %8u kB\n",
 			   (stram_end - stram_start) >> 10);
 	PRINT_PROC( "Allocated regions:\n" );
 	for( p = alloc_list; p; p = p->next ) {
-		if (len + 50 >= PAGE_SIZE)
-			break;
 		PRINT_PROC("0x%08lx-0x%08lx: %s (",
 			   virt_to_phys(p->start),
 			   virt_to_phys(p->start+p->size-1),
@@ -346,9 +344,27 @@ int get_stram_list( char *buf )
 			PRINT_PROC( "??)\n" );
 	}
 
-	return( len );
+	return 0;
+}
+
+static int stram_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, stram_proc_show, NULL);
 }
 
+static const struct file_operations stram_proc_fops = {
+	.open		= stram_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_stram_init(void)
+{
+	proc_create("stram", 0, NULL, &stram_proc_fops);
+	return 0;
+}
+module_init(proc_stram_init);
 #endif
 
 
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index e0d3c8b..1edde27 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -20,6 +20,9 @@
 
 #include <asm/atariints.h>
 
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL_GPL(rtc_lock);
+
 void __init
 atari_sched_init(irq_handler_t timer_routine)
 {
@@ -191,13 +194,14 @@ int atari_tt_hwclk( int op, struct rtc_time *t )
         }
 
         if (!(ctrl & RTC_DM_BINARY)) {
-            BIN_TO_BCD(sec);
-            BIN_TO_BCD(min);
-            BIN_TO_BCD(hour);
-            BIN_TO_BCD(day);
-            BIN_TO_BCD(mon);
-            BIN_TO_BCD(year);
-            if (wday >= 0) BIN_TO_BCD(wday);
+	    sec = bin2bcd(sec);
+	    min = bin2bcd(min);
+	    hour = bin2bcd(hour);
+	    day = bin2bcd(day);
+	    mon = bin2bcd(mon);
+	    year = bin2bcd(year);
+	    if (wday >= 0)
+		wday = bin2bcd(wday);
         }
     }
 
@@ -252,13 +256,13 @@ int atari_tt_hwclk( int op, struct rtc_time *t )
 	}
 
 	if (!(ctrl & RTC_DM_BINARY)) {
-            BCD_TO_BIN(sec);
-            BCD_TO_BIN(min);
-            BCD_TO_BIN(hour);
-            BCD_TO_BIN(day);
-            BCD_TO_BIN(mon);
-            BCD_TO_BIN(year);
-            BCD_TO_BIN(wday);
+	    sec = bcd2bin(sec);
+	    min = bcd2bin(min);
+	    hour = bcd2bin(hour);
+	    day = bcd2bin(day);
+	    mon = bcd2bin(mon);
+	    year = bcd2bin(year);
+	    wday = bcd2bin(wday);
         }
 
         if (!(ctrl & RTC_24H)) {
@@ -318,7 +322,7 @@ int atari_tt_set_clock_mmss (unsigned long nowtime)
 
     rtc_minutes = RTC_READ (RTC_MINUTES);
     if (!(save_control & RTC_DM_BINARY))
-        BCD_TO_BIN (rtc_minutes);
+	rtc_minutes = bcd2bin(rtc_minutes);
 
     /* Since we're only adjusting minutes and seconds, don't interfere
        with hour overflow.  This avoids messing with unknown time zones
@@ -329,8 +333,8 @@ int atari_tt_set_clock_mmss (unsigned long nowtime)
         {
             if (!(save_control & RTC_DM_BINARY))
                 {
-                    BIN_TO_BCD (real_seconds);
-                    BIN_TO_BCD (real_minutes);
+		    real_seconds = bin2bcd(real_seconds);
+		    real_minutes = bin2bcd(real_minutes);
                 }
             RTC_WRITE (RTC_SECONDS, real_seconds);
             RTC_WRITE (RTC_MINUTES, real_minutes);
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 9433a88..c072595 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -25,6 +25,7 @@
 #include <linux/genhd.h>
 #include <linux/rtc.h>
 #include <linux/interrupt.h>
+#include <linux/bcd.h>
 
 #include <asm/bootinfo.h>
 #include <asm/system.h>
@@ -37,7 +38,6 @@
 #include <asm/bvme6000hw.h>
 
 static void bvme6000_get_model(char *model);
-static int  bvme6000_get_hardware_list(char *buffer);
 extern void bvme6000_sched_init(irq_handler_t handler);
 extern unsigned long bvme6000_gettimeoffset (void);
 extern int bvme6000_hwclk (int, struct rtc_time *);
@@ -46,9 +46,6 @@ extern void bvme6000_reset (void);
 extern void bvme6000_waitbut(void);
 void bvme6000_set_vectors (void);
 
-static unsigned char bcd2bin (unsigned char b);
-static unsigned char bin2bcd (unsigned char b);
-
 /* Save tick handler routine pointer, will point to do_timer() in
  * kernel/sched.c, called via bvme6000_process_int() */
 
@@ -84,15 +81,6 @@ static void bvme6000_get_model(char *model)
     sprintf(model, "BVME%d000", m68k_cputype == CPU_68060 ? 6 : 4);
 }
 
-
-/* No hardware options on BVME6000? */
-
-static int bvme6000_get_hardware_list(char *buffer)
-{
-    *buffer = '\0';
-    return 0;
-}
-
 /*
  * This function is called during kernel startup to initialize
  * the bvme6000 IRQ handling routines.
@@ -129,7 +117,6 @@ void __init config_bvme6000(void)
     mach_set_clock_mmss	 = bvme6000_set_clock_mmss;
     mach_reset		 = bvme6000_reset;
     mach_get_model       = bvme6000_get_model;
-    mach_get_hardware_list = bvme6000_get_hardware_list;
 
     printk ("Board is %sconfigured as a System Controller\n",
 		*config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not ");
@@ -264,17 +251,6 @@ unsigned long bvme6000_gettimeoffset (void)
     return v;
 }
 
-static unsigned char bcd2bin (unsigned char b)
-{
-	return ((b>>4)*10 + (b&15));
-}
-
-static unsigned char bin2bcd (unsigned char b)
-{
-	return (((b/10)*16) + (b%10));
-}
-
-
 /*
  * Looks like op is non-zero for setting the clock, and zero for
  * reading the clock.
diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c
index e8ac3f7..c50bec8 100644
--- a/arch/m68k/bvme6000/rtc.c
+++ b/arch/m68k/bvme6000/rtc.c
@@ -18,7 +18,6 @@
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/mc146818rtc.h>	/* For struct rtc_time and ioctls, etc */
-#include <linux/smp_lock.h>
 #include <linux/bcd.h>
 #include <asm/bvme6000hw.h>
 
@@ -57,16 +56,16 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		rtc->msr = 0x40;
 		memset(&wtime, 0, sizeof(struct rtc_time));
 		do {
-			wtime.tm_sec =  BCD2BIN(rtc->bcd_sec);
-			wtime.tm_min =  BCD2BIN(rtc->bcd_min);
-			wtime.tm_hour = BCD2BIN(rtc->bcd_hr);
-			wtime.tm_mday =  BCD2BIN(rtc->bcd_dom);
-			wtime.tm_mon =  BCD2BIN(rtc->bcd_mth)-1;
-			wtime.tm_year = BCD2BIN(rtc->bcd_year);
+			wtime.tm_sec =  bcd2bin(rtc->bcd_sec);
+			wtime.tm_min =  bcd2bin(rtc->bcd_min);
+			wtime.tm_hour = bcd2bin(rtc->bcd_hr);
+			wtime.tm_mday =  bcd2bin(rtc->bcd_dom);
+			wtime.tm_mon =  bcd2bin(rtc->bcd_mth)-1;
+			wtime.tm_year = bcd2bin(rtc->bcd_year);
 			if (wtime.tm_year < 70)
 				wtime.tm_year += 100;
-			wtime.tm_wday = BCD2BIN(rtc->bcd_dow)-1;
-		} while (wtime.tm_sec != BCD2BIN(rtc->bcd_sec));
+			wtime.tm_wday = bcd2bin(rtc->bcd_dow)-1;
+		} while (wtime.tm_sec != bcd2bin(rtc->bcd_sec));
 		rtc->msr = msr;
 		local_irq_restore(flags);
 		return copy_to_user(argp, &wtime, sizeof wtime) ?
@@ -114,14 +113,14 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 		rtc->t0cr_rtmr = yrs%4;
 		rtc->bcd_tenms = 0;
-		rtc->bcd_sec   = BIN2BCD(sec);
-		rtc->bcd_min   = BIN2BCD(min);
-		rtc->bcd_hr    = BIN2BCD(hrs);
-		rtc->bcd_dom   = BIN2BCD(day);
-		rtc->bcd_mth   = BIN2BCD(mon);
-		rtc->bcd_year  = BIN2BCD(yrs%100);
+		rtc->bcd_sec   = bin2bcd(sec);
+		rtc->bcd_min   = bin2bcd(min);
+		rtc->bcd_hr    = bin2bcd(hrs);
+		rtc->bcd_dom   = bin2bcd(day);
+		rtc->bcd_mth   = bin2bcd(mon);
+		rtc->bcd_year  = bin2bcd(yrs%100);
 		if (rtc_tm.tm_wday >= 0)
-			rtc->bcd_dow = BIN2BCD(rtc_tm.tm_wday+1);
+			rtc->bcd_dow = bin2bcd(rtc_tm.tm_wday+1);
 		rtc->t0cr_rtmr = yrs%4 | 0x08;
 
 		rtc->msr = msr;
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 3a7f622..55d5d6b 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -14,5 +14,4 @@ obj-y	:= entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
 
 devres-y = ../../../kernel/irq/devres.o
 
-obj-$(CONFIG_PCI)	+= bios32.o
 obj-y$(CONFIG_MMU_SUN3) += dma.o	# no, it's not a typo
diff --git a/arch/m68k/kernel/bios32.c b/arch/m68k/kernel/bios32.c
deleted file mode 100644
index af170c2b..0000000
--- a/arch/m68k/kernel/bios32.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- * bios32.c - PCI BIOS functions for m68k systems.
- *
- * Written by Wout Klaren.
- *
- * Based on the DEC Alpha bios32.c by Dave Rusling and David Mosberger.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#if 0
-# define DBG_DEVS(args)		printk args
-#else
-# define DBG_DEVS(args)
-#endif
-
-#ifdef CONFIG_PCI
-
-/*
- * PCI support for Linux/m68k. Currently only the Hades is supported.
- *
- * The support for PCI bridges in the DEC Alpha version has
- * been removed in this version.
- */
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/uaccess.h>
-
-#define KB		1024
-#define MB		(1024*KB)
-#define GB		(1024*MB)
-
-#define MAJOR_REV	0
-#define MINOR_REV	5
-
-/*
- * Align VAL to ALIGN, which must be a power of two.
- */
-
-#define ALIGN(val,align)	(((val) + ((align) - 1)) & ~((align) - 1))
-
-/*
- * Offsets relative to the I/O and memory base addresses from where resources
- * are allocated.
- */
-
-#define IO_ALLOC_OFFSET		0x00004000
-#define MEM_ALLOC_OFFSET	0x04000000
-
-/*
- * Declarations of hardware specific initialisation functions.
- */
-
-extern struct pci_bus_info *init_hades_pci(void);
-
-/*
- * Bus info structure of the PCI bus. A pointer to this structure is
- * put in the sysdata member of the pci_bus structure.
- */
-
-static struct pci_bus_info *bus_info;
-
-static int pci_modify = 1;		/* If set, layout the PCI bus ourself. */
-static int skip_vga;			/* If set do not modify base addresses
-					   of vga cards.*/
-static int disable_pci_burst;		/* If set do not allow PCI bursts. */
-
-static unsigned int io_base;
-static unsigned int mem_base;
-
-/*
- * static void disable_dev(struct pci_dev *dev)
- *
- * Disable PCI device DEV so that it does not respond to I/O or memory
- * accesses.
- *
- * Parameters:
- *
- * dev	- device to disable.
- */
-
-static void __init disable_dev(struct pci_dev *dev)
-{
-	unsigned short cmd;
-
-	if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
-	     (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
-	     (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga)
-		return;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
-	cmd &= (~PCI_COMMAND_IO & ~PCI_COMMAND_MEMORY & ~PCI_COMMAND_MASTER);
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
-}
-
-/*
- * static void layout_dev(struct pci_dev *dev)
- *
- * Layout memory and I/O for a device.
- *
- * Parameters:
- *
- * device	- device to layout memory and I/O for.
- */
-
-static void __init layout_dev(struct pci_dev *dev)
-{
-	unsigned short cmd;
-	unsigned int base, mask, size, reg;
-	unsigned int alignto;
-	int i;
-
-	/*
-	 * Skip video cards if requested.
-	 */
-
-	if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
-	     (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
-	     (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga)
-		return;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
-	for (reg = PCI_BASE_ADDRESS_0, i = 0; reg <= PCI_BASE_ADDRESS_5; reg += 4, i++)
-	{
-		/*
-		 * Figure out how much space and of what type this
-		 * device wants.
-		 */
-
-		pci_write_config_dword(dev, reg, 0xffffffff);
-		pci_read_config_dword(dev, reg, &base);
-
-		if (!base)
-		{
-			/* this base-address register is unused */
-			dev->resource[i].start = 0;
-			dev->resource[i].end = 0;
-			dev->resource[i].flags = 0;
-			continue;
-		}
-
-		/*
-		 * We've read the base address register back after
-		 * writing all ones and so now we must decode it.
-		 */
-
-		if (base & PCI_BASE_ADDRESS_SPACE_IO)
-		{
-			/*
-			 * I/O space base address register.
-			 */
-
-			cmd |= PCI_COMMAND_IO;
-
-			base &= PCI_BASE_ADDRESS_IO_MASK;
-			mask = (~base << 1) | 0x1;
-			size = (mask & base) & 0xffffffff;
-
-			/*
-			 * Align to multiple of size of minimum base.
-			 */
-
-			alignto = max_t(unsigned int, 0x040, size);
-			base = ALIGN(io_base, alignto);
-			io_base = base + size;
-			pci_write_config_dword(dev, reg, base | PCI_BASE_ADDRESS_SPACE_IO);
-
-			dev->resource[i].start = base;
-			dev->resource[i].end = dev->resource[i].start + size - 1;
-			dev->resource[i].flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
-
-			DBG_DEVS(("layout_dev: IO address: %lX\n", base));
-		}
-		else
-		{
-			unsigned int type;
-
-			/*
-			 * Memory space base address register.
-			 */
-
-			cmd |= PCI_COMMAND_MEMORY;
-			type = base & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
-			base &= PCI_BASE_ADDRESS_MEM_MASK;
-			mask = (~base << 1) | 0x1;
-			size = (mask & base) & 0xffffffff;
-			switch (type)
-			{
-			case PCI_BASE_ADDRESS_MEM_TYPE_32:
-			case PCI_BASE_ADDRESS_MEM_TYPE_64:
-				break;
-
-			case PCI_BASE_ADDRESS_MEM_TYPE_1M:
-				printk("bios32 WARNING: slot %d, function %d "
-				       "requests memory below 1MB---don't "
-				       "know how to do that.\n",
-				       PCI_SLOT(dev->devfn),
-				       PCI_FUNC(dev->devfn));
-				continue;
-			}
-
-			/*
-			 * Align to multiple of size of minimum base.
-			 */
-
-			alignto = max_t(unsigned int, 0x1000, size);
-			base = ALIGN(mem_base, alignto);
-			mem_base = base + size;
-			pci_write_config_dword(dev, reg, base);
-
-			dev->resource[i].start = base;
-			dev->resource[i].end = dev->resource[i].start + size - 1;
-			dev->resource[i].flags = IORESOURCE_MEM;
-
-			if (type == PCI_BASE_ADDRESS_MEM_TYPE_64)
-			{
-				/*
-				 * 64-bit address, set the highest 32 bits
-				 * to zero.
-				 */
-
-				reg += 4;
-				pci_write_config_dword(dev, reg, 0);
-
-				i++;
-				dev->resource[i].start = 0;
-				dev->resource[i].end = 0;
-				dev->resource[i].flags = 0;
-			}
-		}
-	}
-
-	/*
-	 * Enable device:
-	 */
-
-	if (dev->class >> 8 == PCI_CLASS_NOT_DEFINED ||
-	    dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA ||
-	    dev->class >> 8 == PCI_CLASS_DISPLAY_VGA ||
-	    dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)
-	{
-		/*
-		 * All of these (may) have I/O scattered all around
-		 * and may not use i/o-base address registers at all.
-		 * So we just have to always enable I/O to these
-		 * devices.
-		 */
-		cmd |= PCI_COMMAND_IO;
-	}
-
-	pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER);
-
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, (disable_pci_burst) ? 0 : 32);
-
-	if (bus_info != NULL)
-		bus_info->conf_device(dev);	/* Machine dependent configuration. */
-
-	DBG_DEVS(("layout_dev: bus %d  slot 0x%x  VID 0x%x  DID 0x%x  class 0x%x\n",
-		  dev->bus->number, PCI_SLOT(dev->devfn), dev->vendor, dev->device, dev->class));
-}
-
-/*
- * static void layout_bus(struct pci_bus *bus)
- *
- * Layout memory and I/O for all devices on the given bus.
- *
- * Parameters:
- *
- * bus	- bus.
- */
-
-static void __init layout_bus(struct pci_bus *bus)
-{
-	unsigned int bio, bmem;
-	struct pci_dev *dev;
-
-	DBG_DEVS(("layout_bus: starting bus %d\n", bus->number));
-
-	if (!bus->devices && !bus->children)
-		return;
-
-	/*
-	 * Align the current bases on appropriate boundaries (4K for
-	 * IO and 1MB for memory).
-	 */
-
-	bio = io_base = ALIGN(io_base, 4*KB);
-	bmem = mem_base = ALIGN(mem_base, 1*MB);
-
-	/*
-	 * PCI devices might have been setup by a PCI BIOS emulation
-	 * running under TOS. In these cases there is a
-	 * window during which two devices may have an overlapping
-	 * address range. To avoid this causing trouble, we first
-	 * turn off the I/O and memory address decoders for all PCI
-	 * devices.  They'll be re-enabled only once all address
-	 * decoders are programmed consistently.
-	 */
-
-	DBG_DEVS(("layout_bus: disable_dev for bus %d\n", bus->number));
-
-	for (dev = bus->devices; dev; dev = dev->sibling)
-	{
-		if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
-		    (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
-			disable_dev(dev);
-	}
-
-	/*
-	 * Allocate space to each device:
-	 */
-
-	DBG_DEVS(("layout_bus: starting bus %d devices\n", bus->number));
-
-	for (dev = bus->devices; dev; dev = dev->sibling)
-	{
-		if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
-		    (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
-			layout_dev(dev);
-	}
-
-	DBG_DEVS(("layout_bus: bus %d finished\n", bus->number));
-}
-
-/*
- * static void pcibios_fixup(void)
- *
- * Layout memory and I/O of all devices on the PCI bus if 'pci_modify' is
- * true. This might be necessary because not every m68k machine with a PCI
- * bus has a PCI BIOS. This function should be called right after
- * pci_scan_bus() in pcibios_init().
- */
-
-static void __init pcibios_fixup(void)
-{
-	if (pci_modify)
-	{
-		/*
-		 * Set base addresses for allocation of I/O and memory space.
-		 */
-
-		io_base = bus_info->io_space.start + IO_ALLOC_OFFSET;
-		mem_base = bus_info->mem_space.start + MEM_ALLOC_OFFSET;
-
-		/*
-		 * Scan the tree, allocating PCI memory and I/O space.
-		 */
-
-		layout_bus(pci_bus_b(pci_root.next));
-	}
-
-	/*
-	 * Fix interrupt assignments, etc.
-	 */
-
-	bus_info->fixup(pci_modify);
-}
-
-/*
- * static void pcibios_claim_resources(struct pci_bus *bus)
- *
- * Claim all resources that are assigned to devices on the given bus.
- *
- * Parameters:
- *
- * bus	- bus.
- */
-
-static void __init pcibios_claim_resources(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-	int i;
-
-	while (bus)
-	{
-		for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
-		{
-			for (i = 0; i < PCI_NUM_RESOURCES; i++)
-			{
-				struct resource *r = &dev->resource[i];
-				struct resource *pr;
-				struct pci_bus_info *bus_info = (struct pci_bus_info *) dev->sysdata;
-
-				if ((r->start == 0) || (r->parent != NULL))
-					continue;
-#if 1
-				if (r->flags & IORESOURCE_IO)
-					pr = &bus_info->io_space;
-				else
-					pr = &bus_info->mem_space;
-#else
-				if (r->flags & IORESOURCE_IO)
-					pr = &ioport_resource;
-				else
-					pr = &iomem_resource;
-#endif
-				if (request_resource(pr, r) < 0)
-				{
-					printk(KERN_ERR "PCI: Address space collision on region %d of device %s\n", i, dev->name);
-				}
-			}
-		}
-
-		if (bus->children)
-			pcibios_claim_resources(bus->children);
-
-		bus = bus->next;
-	}
-}
-
-/*
- * int pcibios_assign_resource(struct pci_dev *dev, int i)
- *
- * Assign a new address to a PCI resource.
- *
- * Parameters:
- *
- * dev	- device.
- * i	- resource.
- *
- * Result: 0 if successful.
- */
-
-int __init pcibios_assign_resource(struct pci_dev *dev, int i)
-{
-	struct resource *r = &dev->resource[i];
-	struct resource *pr = pci_find_parent_resource(dev, r);
-	unsigned long size = r->end + 1;
-
-	if (!pr)
-		return -EINVAL;
-
-	if (r->flags & IORESOURCE_IO)
-	{
-		if (size > 0x100)
-			return -EFBIG;
-
-		if (allocate_resource(pr, r, size, bus_info->io_space.start +
-				      IO_ALLOC_OFFSET,  bus_info->io_space.end, 1024))
-			return -EBUSY;
-	}
-	else
-	{
-		if (allocate_resource(pr, r, size, bus_info->mem_space.start +
-				      MEM_ALLOC_OFFSET, bus_info->mem_space.end, size))
-			return -EBUSY;
-	}
-
-	if (i < 6)
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, r->start);
-
-	return 0;
-}
-
-void __init pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-	void *sysdata;
-
-	sysdata = (bus->parent) ? bus->parent->sysdata : bus->sysdata;
-
-	for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
-		dev->sysdata = sysdata;
-}
-
-void __init pcibios_init(void)
-{
-	printk("Linux/m68k PCI BIOS32 revision %x.%02x\n", MAJOR_REV, MINOR_REV);
-
-	bus_info = NULL;
-#ifdef CONFIG_HADES
-	if (MACH_IS_HADES)
-		bus_info = init_hades_pci();
-#endif
-	if (bus_info != NULL)
-	{
-		printk("PCI: Probing PCI hardware\n");
-		pci_scan_bus(0, bus_info->m68k_pci_ops, bus_info);
-		pcibios_fixup();
-		pcibios_claim_resources(pci_root);
-	}
-	else
-		printk("PCI: No PCI bus detected\n");
-}
-
-char * __init pcibios_setup(char *str)
-{
-	if (!strcmp(str, "nomodify"))
-	{
-		pci_modify = 0;
-		return NULL;
-	}
-	else if (!strcmp(str, "skipvga"))
-	{
-		skip_vga = 1;
-		return NULL;
-	}
-	else if (!strcmp(str, "noburst"))
-	{
-		disable_pci_burst = 1;
-		return NULL;
-	}
-
-	return str;
-}
-#endif /* CONFIG_PCI */
diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c
index 6f8c080..2bb4245 100644
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -66,8 +66,8 @@ void dma_free_coherent(struct device *dev, size_t size,
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
-inline void dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
-				       enum dma_data_direction dir)
+void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
+				size_t size, enum dma_data_direction dir)
 {
 	switch (dir) {
 	case DMA_TO_DEVICE:
diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c
index ded7dd2..7e8a0d3 100644
--- a/arch/m68k/kernel/ints.c
+++ b/arch/m68k/kernel/ints.c
@@ -429,8 +429,9 @@ int show_interrupts(struct seq_file *p, void *v)
 	return 0;
 }
 
+#ifdef CONFIG_PROC_FS
 void init_irq_proc(void)
 {
 	/* Insert /proc/irq driver here */
 }
-
+#endif
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 7888cdf..3042c2b 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -78,7 +78,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 static void default_idle(void)
 {
 	if (!need_resched())
-#if defined(MACH_ATARI_ONLY) && !defined(CONFIG_HADES)
+#if defined(MACH_ATARI_ONLY)
 		/* block out HSYNC on the atari (falcon) */
 		__asm__("stop #0x2200" : : : "cc");
 #else
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index ea1e44d..4d97bd2 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -20,6 +20,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/module.h>
 #include <linux/initrd.h>
@@ -80,7 +81,7 @@ void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
 /* machine dependent irq functions */
 void (*mach_init_IRQ) (void) __initdata = NULL;
 void (*mach_get_model) (char *model);
-int (*mach_get_hardware_list) (char *buffer);
+void (*mach_get_hardware_list) (struct seq_file *m);
 /* machine dependent timer functions */
 unsigned long (*mach_gettimeoffset) (void);
 int (*mach_hwclk) (int, struct rtc_time*);
@@ -467,9 +468,9 @@ const struct seq_operations cpuinfo_op = {
 	.show	= show_cpuinfo,
 };
 
-int get_hardware_list(char *buffer)
+#ifdef CONFIG_PROC_HARDWARE
+static int hardware_proc_show(struct seq_file *m, void *v)
 {
-	int len = 0;
 	char model[80];
 	unsigned long mem;
 	int i;
@@ -479,17 +480,37 @@ int get_hardware_list(char *buffer)
 	else
 		strcpy(model, "Unknown m68k");
 
-	len += sprintf(buffer + len, "Model:\t\t%s\n", model);
+	seq_printf(m, "Model:\t\t%s\n", model);
 	for (mem = 0, i = 0; i < m68k_num_memory; i++)
 		mem += m68k_memory[i].size;
-	len += sprintf(buffer + len, "System Memory:\t%ldK\n", mem >> 10);
+	seq_printf(m, "System Memory:\t%ldK\n", mem >> 10);
 
 	if (mach_get_hardware_list)
-		len += mach_get_hardware_list(buffer + len);
+		mach_get_hardware_list(m);
 
-	return len;
+	return 0;
+}
+
+static int hardware_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hardware_proc_show, NULL);
 }
 
+static const struct file_operations hardware_proc_fops = {
+	.open		= hardware_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_hardware_init(void)
+{
+	proc_create("hardware", 0, NULL, &hardware_proc_fops);
+	return 0;
+}
+module_init(proc_hardware_init);
+#endif
+
 void check_bugs(void)
 {
 #ifndef CONFIG_M68KFPU_EMU
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index 75b8340..6d813de 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -883,8 +883,7 @@ void show_trace(unsigned long *stack)
 			if (i % 5 == 0)
 				printk("\n       ");
 #endif
-			printk(" [<%08lx>]", addr);
-			print_symbol(" %s\n", addr);
+			printk(" [<%08lx>] %pS\n", addr, (void *)addr);
 			i++;
 		}
 	}
@@ -900,10 +899,8 @@ void show_registers(struct pt_regs *regs)
 	int i;
 
 	print_modules();
-	printk("PC: [<%08lx>]",regs->pc);
-	print_symbol(" %s", regs->pc);
-	printk("\nSR: %04x  SP: %p  a2: %08lx\n",
-	       regs->sr, regs, regs->a2);
+	printk("PC: [<%08lx>] %pS\n", regs->pc, (void *)regs->pc);
+	printk("SR: %04x  SP: %p  a2: %08lx\n", regs->sr, regs, regs->a2);
 	printk("d0: %08lx    d1: %08lx    d2: %08lx    d3: %08lx\n",
 	       regs->d0, regs->d1, regs->d2, regs->d3);
 	printk("d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 99b0784..f846d4e 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -34,10 +34,10 @@ SECTIONS
 	CONSTRUCTORS
 	}
 
-  .bss : { *(.bss) }		/* BSS */
-
   . = ALIGN(16);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) } :data
+  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+  .bss : { *(.bss) }		/* BSS */
 
   _edata = .;			/* End of data section */
 
@@ -48,7 +48,7 @@ SECTIONS
 	_sinittext = .;
 	INIT_TEXT
 	_einittext = .;
-  }
+  } :data
   .init.data : { INIT_DATA }
   . = ALIGN(16);
   __setup_start = .;
@@ -74,6 +74,7 @@ SECTIONS
   .init.ramfs : { *(.init.ramfs) }
   __initramfs_end = .;
 #endif
+  NOTES
   . = ALIGN(8192);
   __init_end = .;
 
diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c
index 46b7d60..df620ac 100644
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -66,8 +66,10 @@ static struct vm_struct *get_io_area(unsigned long size)
 	for (p = &iolist; (tmp = *p) ; p = &tmp->next) {
 		if (size + addr < (unsigned long)tmp->addr)
 			break;
-		if (addr > KMAP_END-size)
+		if (addr > KMAP_END-size) {
+			kfree(area);
 			return NULL;
+		}
 		addr = tmp->size + (unsigned long)tmp->addr;
 	}
 	area->addr = (void *)addr;
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 92fe507..43cdf47 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -37,7 +37,6 @@
 
 
 static void mvme147_get_model(char *model);
-static int  mvme147_get_hardware_list(char *buffer);
 extern void mvme147_sched_init(irq_handler_t handler);
 extern unsigned long mvme147_gettimeoffset (void);
 extern int mvme147_hwclk (int, struct rtc_time *);
@@ -76,14 +75,6 @@ static void mvme147_get_model(char *model)
 	sprintf(model, "Motorola MVME147");
 }
 
-
-static int mvme147_get_hardware_list(char *buffer)
-{
-	*buffer = '\0';
-
-	return 0;
-}
-
 /*
  * This function is called during kernel startup to initialize
  * the mvme147 IRQ handling routines.
@@ -104,7 +95,6 @@ void __init config_mvme147(void)
 	mach_set_clock_mmss	= mvme147_set_clock_mmss;
 	mach_reset		= mvme147_reset;
 	mach_get_model		= mvme147_get_model;
-	mach_get_hardware_list	= mvme147_get_hardware_list;
 
 	/* Board type is only set by newer versions of vmelilo/tftplilo */
 	if (!vme_brdtype)
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 24cbc30..1521826 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -17,6 +17,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/linkage.h>
@@ -42,7 +43,6 @@ extern t_bdid mvme_bdid;
 static MK48T08ptr_t volatile rtc = (MK48T08ptr_t)MVME_RTC_BASE;
 
 static void mvme16x_get_model(char *model);
-static int  mvme16x_get_hardware_list(char *buffer);
 extern void mvme16x_sched_init(irq_handler_t handler);
 extern unsigned long mvme16x_gettimeoffset (void);
 extern int mvme16x_hwclk (int, struct rtc_time *);
@@ -93,26 +93,21 @@ static void mvme16x_get_model(char *model)
 }
 
 
-static int mvme16x_get_hardware_list(char *buffer)
+static void mvme16x_get_hardware_list(struct seq_file *m)
 {
     p_bdid p = &mvme_bdid;
-    int len = 0;
 
     if (p->brdno == 0x0162 || p->brdno == 0x0172)
     {
 	unsigned char rev = *(unsigned char *)MVME162_VERSION_REG;
 
-	len += sprintf (buffer+len, "VMEchip2        %spresent\n",
+	seq_printf (m, "VMEchip2        %spresent\n",
 			rev & MVME16x_CONFIG_NO_VMECHIP2 ? "NOT " : "");
-	len += sprintf (buffer+len, "SCSI interface  %spresent\n",
+	seq_printf (m, "SCSI interface  %spresent\n",
 			rev & MVME16x_CONFIG_NO_SCSICHIP ? "NOT " : "");
-	len += sprintf (buffer+len, "Ethernet i/f    %spresent\n",
+	seq_printf (m, "Ethernet i/f    %spresent\n",
 			rev & MVME16x_CONFIG_NO_ETHERNET ? "NOT " : "");
     }
-    else
-	*buffer = '\0';
-
-    return (len);
 }
 
 /*
diff --git a/arch/m68k/mvme16x/rtc.c b/arch/m68k/mvme16x/rtc.c
index 432a9f1..cea5e3e 100644
--- a/arch/m68k/mvme16x/rtc.c
+++ b/arch/m68k/mvme16x/rtc.c
@@ -52,15 +52,15 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		/* Ensure clock and real-time-mode-register are accessible */
 		rtc->ctrl = RTC_READ;
 		memset(&wtime, 0, sizeof(struct rtc_time));
-		wtime.tm_sec =  BCD2BIN(rtc->bcd_sec);
-		wtime.tm_min =  BCD2BIN(rtc->bcd_min);
-		wtime.tm_hour = BCD2BIN(rtc->bcd_hr);
-		wtime.tm_mday =  BCD2BIN(rtc->bcd_dom);
-		wtime.tm_mon =  BCD2BIN(rtc->bcd_mth)-1;
-		wtime.tm_year = BCD2BIN(rtc->bcd_year);
+		wtime.tm_sec =  bcd2bin(rtc->bcd_sec);
+		wtime.tm_min =  bcd2bin(rtc->bcd_min);
+		wtime.tm_hour = bcd2bin(rtc->bcd_hr);
+		wtime.tm_mday =  bcd2bin(rtc->bcd_dom);
+		wtime.tm_mon =  bcd2bin(rtc->bcd_mth)-1;
+		wtime.tm_year = bcd2bin(rtc->bcd_year);
 		if (wtime.tm_year < 70)
 			wtime.tm_year += 100;
-		wtime.tm_wday = BCD2BIN(rtc->bcd_dow)-1;
+		wtime.tm_wday = bcd2bin(rtc->bcd_dow)-1;
 		rtc->ctrl = 0;
 		local_irq_restore(flags);
 		return copy_to_user(argp, &wtime, sizeof wtime) ?
@@ -104,12 +104,12 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		local_irq_save(flags);
 		rtc->ctrl     = RTC_WRITE;
 
-		rtc->bcd_sec  = BIN2BCD(sec);
-		rtc->bcd_min  = BIN2BCD(min);
-		rtc->bcd_hr   = BIN2BCD(hrs);
-		rtc->bcd_dom  = BIN2BCD(day);
-		rtc->bcd_mth  = BIN2BCD(mon);
-		rtc->bcd_year = BIN2BCD(yrs%100);
+		rtc->bcd_sec  = bin2bcd(sec);
+		rtc->bcd_min  = bin2bcd(min);
+		rtc->bcd_hr   = bin2bcd(hrs);
+		rtc->bcd_dom  = bin2bcd(day);
+		rtc->bcd_mth  = bin2bcd(mon);
+		rtc->bcd_year = bin2bcd(yrs%100);
 
 		rtc->ctrl     = 0;
 		local_irq_restore(flags);
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index be9de2f..7110546 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -23,6 +23,7 @@
 #include <linux/serial_reg.h>
 #include <linux/rtc.h>
 #include <linux/vt_kern.h>
+#include <linux/bcd.h>
 
 #include <asm/io.h>
 #include <asm/rtc.h>
@@ -38,7 +39,6 @@
 extern irqreturn_t q40_process_int(int level, struct pt_regs *regs);
 extern void q40_init_IRQ(void);
 static void q40_get_model(char *model);
-static int  q40_get_hardware_list(char *buffer);
 extern void q40_sched_init(irq_handler_t handler);
 
 static unsigned long q40_gettimeoffset(void);
@@ -152,14 +152,6 @@ static void q40_get_model(char *model)
 	sprintf(model, "Q40");
 }
 
-/* No hardware options on Q40? */
-
-static int q40_get_hardware_list(char *buffer)
-{
-	*buffer = '\0';
-	return 0;
-}
-
 static unsigned int serports[] =
 {
 	0x3f8,0x2f8,0x3e8,0x2e8,0
@@ -190,7 +182,6 @@ void __init config_q40(void)
 
 	mach_reset = q40_reset;
 	mach_get_model = q40_get_model;
-	mach_get_hardware_list = q40_get_hardware_list;
 
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
 	mach_beep = q40_mksound;
@@ -216,17 +207,6 @@ int q40_parse_bootinfo(const struct bi_record *rec)
 }
 
 
-static inline unsigned char bcd2bin(unsigned char b)
-{
-	return (b >> 4) * 10 + (b & 15);
-}
-
-static inline unsigned char bin2bcd(unsigned char b)
-{
-	return (b / 10) * 16 + (b % 10);
-}
-
-
 static unsigned long q40_gettimeoffset(void)
 {
 	return 5000 * (ql_ticks != 0);
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 732087d0..8dfaa20 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/init.h>
@@ -46,16 +47,9 @@ extern volatile unsigned char* sun3_intreg;
 extern unsigned long availmem;
 unsigned long num_pages;
 
-static int sun3_get_hardware_list(char *buffer)
+static void sun3_get_hardware_list(struct seq_file *m)
 {
-
-	int len = 0;
-
-	len += sprintf(buffer + len, "PROM Revision:\t%s\n",
-		       romvec->pv_monid);
-
-	return len;
-
+	seq_printf(m, "PROM Revision:\t%s\n", romvec->pv_monid);
 }
 
 void __init sun3_init(void)
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index 9878917..2b1ca2d 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -8,6 +8,7 @@
 
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/console.h>
 #include <linux/init.h>
 
@@ -31,16 +32,9 @@ void sun3_leds(unsigned int i)
 
 }
 
-static int sun3x_get_hardware_list(char *buffer)
+static void sun3x_get_hardware_list(struct seq_file *m)
 {
-
-	int len = 0;
-
-	len += sprintf(buffer + len, "PROM Revision:\t%s\n",
-		       romvec->pv_monid);
-
-	return len;
-
+	seq_printf(m, "PROM Revision:\t%s\n", romvec->pv_monid);
 }
 
 /*
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index f5eaafb..536a04a 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -47,23 +47,23 @@ int sun3x_hwclk(int set, struct rtc_time *t)
 
 	if(set) {
 		h->csr |= C_WRITE;
-		h->sec = BIN2BCD(t->tm_sec);
-		h->min = BIN2BCD(t->tm_min);
-		h->hour = BIN2BCD(t->tm_hour);
-		h->wday = BIN2BCD(t->tm_wday);
-		h->mday = BIN2BCD(t->tm_mday);
-		h->month = BIN2BCD(t->tm_mon);
-		h->year = BIN2BCD(t->tm_year);
+		h->sec = bin2bcd(t->tm_sec);
+		h->min = bin2bcd(t->tm_min);
+		h->hour = bin2bcd(t->tm_hour);
+		h->wday = bin2bcd(t->tm_wday);
+		h->mday = bin2bcd(t->tm_mday);
+		h->month = bin2bcd(t->tm_mon);
+		h->year = bin2bcd(t->tm_year);
 		h->csr &= ~C_WRITE;
 	} else {
 		h->csr |= C_READ;
-		t->tm_sec = BCD2BIN(h->sec);
-		t->tm_min = BCD2BIN(h->min);
-		t->tm_hour = BCD2BIN(h->hour);
-		t->tm_wday = BCD2BIN(h->wday);
-		t->tm_mday = BCD2BIN(h->mday);
-		t->tm_mon = BCD2BIN(h->month);
-		t->tm_year = BCD2BIN(h->year);
+		t->tm_sec = bcd2bin(h->sec);
+		t->tm_min = bcd2bin(h->min);
+		t->tm_hour = bcd2bin(h->hour);
+		t->tm_wday = bcd2bin(h->wday);
+		t->tm_mday = bcd2bin(h->mday);
+		t->tm_mon = bcd2bin(h->month);
+		t->tm_year = bcd2bin(h->year);
 		h->csr &= ~C_READ;
 	}
 
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 2e7515e..76b66fe 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -73,11 +73,10 @@ config GENERIC_CLOCKEVENTS
 config NO_IOPORT
 	def_bool y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "Processor type and features"
 
 choice
diff --git a/arch/m68knommu/include/asm/a.out.h b/arch/m68knommu/include/asm/a.out.h
deleted file mode 100644
index ce18ef9..0000000
--- a/arch/m68knommu/include/asm/a.out.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/a.out.h>
diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68knommu/include/asm/elf.h
index 27f0ec7..b804683 100644
--- a/arch/m68knommu/include/asm/elf.h
+++ b/arch/m68knommu/include/asm/elf.h
@@ -105,6 +105,6 @@ typedef struct user_m68kfp_struct elf_fpregset_t;
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
 
 #endif
diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68knommu/include/asm/thread_info.h
index 0c9bc09..82529f4 100644
--- a/arch/m68knommu/include/asm/thread_info.h
+++ b/arch/m68knommu/include/asm/thread_info.h
@@ -84,12 +84,14 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
 #define TIF_MEMDIE		4
+#define TIF_FREEZE		16	/* is freezing for suspend */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 47502d5..3f2d774 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -25,7 +25,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
 #include <linux/fs.h>
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 46f8f9d..5d5d56b 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -22,7 +22,6 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/a.out.h>
 #include <linux/user.h>
 #include <linux/string.h>
 #include <linux/linkage.h>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 49896a2..5f149b0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -52,6 +52,7 @@ config BCM47XX
 	select SSB
 	select SSB_DRIVER_MIPS
 	select SSB_DRIVER_EXTIF
+	select SSB_EMBEDDED
 	select SSB_PCICORE_HOSTMODE if PCI
 	select GENERIC_GPIO
 	select SYS_HAS_EARLY_PRINTK
@@ -211,6 +212,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS_CMP if BROKEN	# because SYNC_R4K is broken
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	help
@@ -567,7 +569,7 @@ config MIKROTIK_RB532
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SWAP_IO_SPACE
 	select BOOT_RAW
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support the Mikrotik(tm) RouterBoard 532 series,
 	  based on the IDT RC32434 SoC.
@@ -597,7 +599,7 @@ config WR_PPMC
 
 endchoice
 
-source "arch/mips/au1000/Kconfig"
+source "arch/mips/alchemy/Kconfig"
 source "arch/mips/basler/excite/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
@@ -609,11 +611,6 @@ source "arch/mips/vr41xx/Kconfig"
 
 endmenu
 
-config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
-
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
@@ -1272,6 +1269,13 @@ config CPU_SUPPORTS_32BIT_KERNEL
 config CPU_SUPPORTS_64BIT_KERNEL
 	bool
 
+#
+# Set to y for ptrace access to watch registers.
+#
+config HARDWARE_WATCHPOINTS
+       bool
+       default y if CPU_MIPS32 || CPU_MIPS64
+
 menu "Kernel type"
 
 choice
@@ -1403,7 +1407,6 @@ config MIPS_MT_SMTC
 	depends on CPU_MIPS32_R2
 	#depends on CPU_MIPS64_R2		# once there is hardware ...
 	depends on SYS_SUPPORTS_MULTITHREADING
-	select GENERIC_CLOCKEVENTS_BROADCAST
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
@@ -1451,32 +1454,17 @@ config MIPS_VPE_LOADER
 	  Includes a loader for loading an elf relocatable object
 	  onto another VPE and running it.
 
-config MIPS_MT_SMTC_INSTANT_REPLAY
-	bool "Low-latency Dispatch of Deferred SMTC IPIs"
-	depends on MIPS_MT_SMTC && !PREEMPT
-	default y
-	help
-	  SMTC pseudo-interrupts between TCs are deferred and queued
-	  if the target TC is interrupt-inhibited (IXMT). In the first
-	  SMTC prototypes, these queued IPIs were serviced on return
-	  to user mode, or on entry into the kernel idle loop. The
-	  INSTANT_REPLAY option dispatches them as part of local_irq_restore()
-	  processing, which adds runtime overhead (hence the option to turn
-	  it off), but ensures that IPIs are handled promptly even under
-	  heavy I/O interrupt load.
-
 config MIPS_MT_SMTC_IM_BACKSTOP
 	bool "Use per-TC register bits as backstop for inhibited IM bits"
 	depends on MIPS_MT_SMTC
-	default y
+	default n
 	help
 	  To support multiple TC microthreads acting as "CPUs" within
 	  a VPE, VPE-wide interrupt mask bits must be specially manipulated
 	  during interrupt handling. To support legacy drivers and interrupt
 	  controller management code, SMTC has a "backstop" to track and
 	  if necessary restore the interrupt mask. This has some performance
-	  impact on interrupt service overhead. Disable it only if you know
-	  what you are doing.
+	  impact on interrupt service overhead.
 
 config MIPS_MT_SMTC_IRQAFF
 	bool "Support IRQ affinity API"
@@ -1486,10 +1474,8 @@ config MIPS_MT_SMTC_IRQAFF
 	  Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
 	  for SMTC Linux kernel. Requires platform support, of which
 	  an example can be found in the MIPS kernel i8259 and Malta
-	  platform code.  It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY
-	  be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to
-	  interrupt dispatch, and should be used only if you know what
-	  you are doing.
+	  platform code.  Adds some overhead to interrupt dispatch, and
+	  should be used only if you know what you are doing.
 
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
@@ -1517,6 +1503,18 @@ config MIPS_APSP_KSPD
 	  "exit" syscall notifying other kernel modules the SP program is
 	  exiting.  You probably want to say yes here.
 
+config MIPS_CMP
+	bool "MIPS CMP framework support"
+	depends on SYS_SUPPORTS_MIPS_CMP
+	select SYNC_R4K if BROKEN
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_SCHED_SMT if SMP
+	select WEAK_ORDERING
+	default n
+	help
+	  This is a placeholder option for the GCMP work. It will need to
+	  be handled differently...
+
 config SB1_PASS_1_WORKAROUNDS
 	bool
 	depends on CPU_SB1_PASS_1
@@ -1693,6 +1691,9 @@ config SMP
 config SMP_UP
 	bool
 
+config SYS_SUPPORTS_MIPS_CMP
+	bool
+
 config SYS_SUPPORTS_SMP
 	bool
 
@@ -1740,17 +1741,6 @@ config NR_CPUS
 	  performance should round up your number of processors to the next
 	  power of two.
 
-config MIPS_CMP
-	bool "MIPS CMP framework support"
-	depends on SMP
-	select SYNC_R4K
-	select SYS_SUPPORTS_SCHED_SMT
-	select WEAK_ORDERING
-	default n
-	help
-	  This is a placeholder option for the GCMP work. It will need to
-	  be handled differently...
-
 source "kernel/time/Kconfig"
 
 #
@@ -1895,6 +1885,8 @@ config PROBE_INITRD_HEADER
 	  add initrd or initramfs image to the kernel image.
 	  Otherwise, say N.
 
+source "kernel/Kconfig.freezer"
+
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
 config HW_HAS_EISA
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 9aab51ca..7f39fd8 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -170,123 +170,123 @@ libs-$(CONFIG_SIBYTE_CFE)	+= arch/mips/sibyte/cfe/
 # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
 #
 core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
-cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/asm-mips/mach-jazz
+cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctree)/arch/mips/include/asm/mach-jazz
 load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
 
 #
 # Common Alchemy Au1x00 stuff
 #
-core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
-cflags-$(CONFIG_SOC_AU1X00)	+= -Iinclude/asm-mips/mach-au1x00
+core-$(CONFIG_SOC_AU1X00)	+= arch/mips/alchemy/common/
+cflags-$(CONFIG_SOC_AU1X00)	+= -I$(srctree)/arch/mips/include/asm/mach-au1x00
 
 #
 # AMD Alchemy Pb1000 eval board
 #
-libs-$(CONFIG_MIPS_PB1000)	+= arch/mips/au1000/pb1000/
-cflags-$(CONFIG_MIPS_PB1000)	+= -Iinclude/asm-mips/mach-pb1x00
+libs-$(CONFIG_MIPS_PB1000)	+= arch/mips/alchemy/pb1000/
+cflags-$(CONFIG_MIPS_PB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1000)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1100 eval board
 #
-libs-$(CONFIG_MIPS_PB1100)	+= arch/mips/au1000/pb1100/
-cflags-$(CONFIG_MIPS_PB1100)	+= -Iinclude/asm-mips/mach-pb1x00
+libs-$(CONFIG_MIPS_PB1100)	+= arch/mips/alchemy/pb1100/
+cflags-$(CONFIG_MIPS_PB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1100)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1500 eval board
 #
-libs-$(CONFIG_MIPS_PB1500)	+= arch/mips/au1000/pb1500/
-cflags-$(CONFIG_MIPS_PB1500)	+= -Iinclude/asm-mips/mach-pb1x00
+libs-$(CONFIG_MIPS_PB1500)	+= arch/mips/alchemy/pb1500/
+cflags-$(CONFIG_MIPS_PB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1500)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1550 eval board
 #
-libs-$(CONFIG_MIPS_PB1550)	+= arch/mips/au1000/pb1550/
-cflags-$(CONFIG_MIPS_PB1550)	+= -Iinclude/asm-mips/mach-pb1x00
+libs-$(CONFIG_MIPS_PB1550)	+= arch/mips/alchemy/pb1550/
+cflags-$(CONFIG_MIPS_PB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1550)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1200 eval board
 #
-libs-$(CONFIG_MIPS_PB1200)	+= arch/mips/au1000/pb1200/
-cflags-$(CONFIG_MIPS_PB1200)	+= -Iinclude/asm-mips/mach-pb1x00
+libs-$(CONFIG_MIPS_PB1200)	+= arch/mips/alchemy/pb1200/
+cflags-$(CONFIG_MIPS_PB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1200)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Db1000 eval board
 #
-libs-$(CONFIG_MIPS_DB1000)	+= arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_DB1000)	+= -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_DB1000)	+= arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_DB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1000)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Db1100 eval board
 #
-libs-$(CONFIG_MIPS_DB1100)	+= arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_DB1100)	+= -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_DB1100)	+= arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_DB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1100)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Db1500 eval board
 #
-libs-$(CONFIG_MIPS_DB1500)	+= arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_DB1500)	+= -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_DB1500)	+= arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_DB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1500)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Db1550 eval board
 #
-libs-$(CONFIG_MIPS_DB1550)	+= arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_DB1550)	+= -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_DB1550)	+= arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_DB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1550)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Db1200 eval board
 #
-libs-$(CONFIG_MIPS_DB1200)	+= arch/mips/au1000/pb1200/
-cflags-$(CONFIG_MIPS_DB1200)	+= -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_DB1200)	+= arch/mips/alchemy/pb1200/
+cflags-$(CONFIG_MIPS_DB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Bosporus eval board
 #
-libs-$(CONFIG_MIPS_BOSPORUS)	+= arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_BOSPORUS)	+= -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_BOSPORUS)	+= arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_BOSPORUS)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_BOSPORUS)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Mirage eval board
 #
-libs-$(CONFIG_MIPS_MIRAGE)	+= arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_MIRAGE)	+= -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_MIRAGE)	+= arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_MIRAGE)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_MIRAGE)	+= 0xffffffff80100000
 
 #
 # 4G-Systems eval board
 #
-libs-$(CONFIG_MIPS_MTX1)	+= arch/mips/au1000/mtx-1/
+libs-$(CONFIG_MIPS_MTX1)	+= arch/mips/alchemy/mtx-1/
 load-$(CONFIG_MIPS_MTX1)	+= 0xffffffff80100000
 
 #
 # MyCable eval board
 #
-libs-$(CONFIG_MIPS_XXS1500)	+= arch/mips/au1000/xxs1500/
+libs-$(CONFIG_MIPS_XXS1500)	+= arch/mips/alchemy/xxs1500/
 load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 
 #
 # Cobalt Server
 #
 core-$(CONFIG_MIPS_COBALT)	+= arch/mips/cobalt/
-cflags-$(CONFIG_MIPS_COBALT)	+= -Iinclude/asm-mips/mach-cobalt
+cflags-$(CONFIG_MIPS_COBALT)	+= -I$(srctree)/arch/mips/include/asm/mach-cobalt
 load-$(CONFIG_MIPS_COBALT)	+= 0xffffffff80080000
 
 #
 # DECstation family
 #
 core-$(CONFIG_MACH_DECSTATION)	+= arch/mips/dec/
-cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec
+cflags-$(CONFIG_MACH_DECSTATION)+= -I$(srctree)/arch/mips/include/asm/mach-dec
 libs-$(CONFIG_MACH_DECSTATION)	+= arch/mips/dec/prom/
 load-$(CONFIG_MACH_DECSTATION)	+= 0xffffffff80040000
 
@@ -294,7 +294,7 @@ load-$(CONFIG_MACH_DECSTATION)	+= 0xffffffff80040000
 # Wind River PPMC Board (4KC + GT64120)
 #
 core-$(CONFIG_WR_PPMC)		+= arch/mips/gt64120/wrppmc/
-cflags-$(CONFIG_WR_PPMC)		+= -Iinclude/asm-mips/mach-wrppmc
+cflags-$(CONFIG_WR_PPMC)		+= -I$(srctree)/arch/mips/include/asm/mach-wrppmc
 load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
 
 #
@@ -302,13 +302,13 @@ load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
 #
 core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/
 load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000
-cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
+cflags-$(CONFIG_LEMOTE_FULONG) += -I$(srctree)/arch/mips/include/asm/mach-lemote
 
 #
 # MIPS Malta board
 #
 core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mti-malta/
-cflags-$(CONFIG_MIPS_MALTA)	+= -Iinclude/asm-mips/mach-malta
+cflags-$(CONFIG_MIPS_MALTA)	+= -I$(srctree)/arch/mips/include/asm/mach-malta
 load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
 all-$(CONFIG_MIPS_MALTA)	:= vmlinux.bin
 
@@ -316,14 +316,14 @@ all-$(CONFIG_MIPS_MALTA)	:= vmlinux.bin
 # MIPS SIM
 #
 core-$(CONFIG_MIPS_SIM)		+= arch/mips/mipssim/
-cflags-$(CONFIG_MIPS_SIM)	+= -Iinclude/asm-mips/mach-mipssim
+cflags-$(CONFIG_MIPS_SIM)	+= -I$(srctree)/arch/mips/include/asm/mach-mipssim
 load-$(CONFIG_MIPS_SIM)		+= 0x80100000
 
 #
 # PMC-Sierra MSP SOCs
 #
 core-$(CONFIG_PMC_MSP)		+= arch/mips/pmc-sierra/msp71xx/
-cflags-$(CONFIG_PMC_MSP)	+= -Iinclude/asm-mips/pmc-sierra/msp71xx \
+cflags-$(CONFIG_PMC_MSP)	+= -I$(srctree)/arch/mips/include/asm/pmc-sierra/msp71xx \
 					-mno-branch-likely
 load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000
 
@@ -331,28 +331,28 @@ load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000
 # PMC-Sierra Yosemite
 #
 core-$(CONFIG_PMC_YOSEMITE)	+= arch/mips/pmc-sierra/yosemite/
-cflags-$(CONFIG_PMC_YOSEMITE)	+= -Iinclude/asm-mips/mach-yosemite
+cflags-$(CONFIG_PMC_YOSEMITE)	+= -I$(srctree)/arch/mips/include/asm/mach-yosemite
 load-$(CONFIG_PMC_YOSEMITE)	+= 0xffffffff80100000
 
 #
 # Basler eXcite
 #
 core-$(CONFIG_BASLER_EXCITE)	+= arch/mips/basler/excite/
-cflags-$(CONFIG_BASLER_EXCITE)	+= -Iinclude/asm-mips/mach-excite
+cflags-$(CONFIG_BASLER_EXCITE)	+= -I$(srctree)/arch/mips/include/asm/mach-excite
 load-$(CONFIG_BASLER_EXCITE)	+= 0x80100000
 
 #
 # LASAT platforms
 #
 core-$(CONFIG_LASAT)		+= arch/mips/lasat/
-cflags-$(CONFIG_LASAT)		+= -Iinclude/asm-mips/mach-lasat
+cflags-$(CONFIG_LASAT)		+= -I$(srctree)/arch/mips/include/asm/mach-lasat
 load-$(CONFIG_LASAT)		+= 0xffffffff80000000
 
 #
 # Common VR41xx
 #
 core-$(CONFIG_MACH_VR41XX)	+= arch/mips/vr41xx/common/
-cflags-$(CONFIG_MACH_VR41XX)	+= -Iinclude/asm-mips/mach-vr41xx
+cflags-$(CONFIG_MACH_VR41XX)	+= -I$(srctree)/arch/mips/include/asm/mach-vr41xx
 
 #
 # ZAO Networks Capcella (VR4131)
@@ -385,13 +385,13 @@ load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
 # Common NXP PNX8550
 #
 core-$(CONFIG_SOC_PNX8550)	+= arch/mips/nxp/pnx8550/common/
-cflags-$(CONFIG_SOC_PNX8550)	+= -Iinclude/asm-mips/mach-pnx8550
+cflags-$(CONFIG_SOC_PNX8550)	+= -I$(srctree)/arch/mips/include/asm/mach-pnx8550
 
 #
 # NXP PNX8550 JBS board
 #
 libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/nxp/pnx8550/jbs/
-#cflags-$(CONFIG_PNX8550_JBS)	+= -Iinclude/asm-mips/mach-pnx8550
+#cflags-$(CONFIG_PNX8550_JBS)	+= -I$(srctree)/arch/mips/include/asm/mach-pnx8550
 load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
 
 # NXP PNX8550 STB810 board
@@ -402,7 +402,7 @@ load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
 # NEC EMMA2RH boards
 #
 core-$(CONFIG_EMMA2RH)          += arch/mips/emma2rh/common/
-cflags-$(CONFIG_EMMA2RH)        += -Iinclude/asm-mips/mach-emma2rh
+cflags-$(CONFIG_EMMA2RH)        += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
 
 # NEC EMMA2RH Mark-eins
 core-$(CONFIG_MARKEINS)         += arch/mips/emma2rh/markeins/
@@ -418,7 +418,7 @@ load-$(CONFIG_MARKEINS)         += 0xffffffff88100000
 # address by 8kb.
 #
 core-$(CONFIG_SGI_IP22)		+= arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP22)	+= -Iinclude/asm-mips/mach-ip22
+cflags-$(CONFIG_SGI_IP22)	+= -I$(srctree)/arch/mips/include/asm/mach-ip22
 ifdef CONFIG_32BIT
 load-$(CONFIG_SGI_IP22)		+= 0xffffffff88002000
 endif
@@ -435,7 +435,7 @@ endif
 #
 ifdef CONFIG_SGI_IP27
 core-$(CONFIG_SGI_IP27)		+= arch/mips/sgi-ip27/
-cflags-$(CONFIG_SGI_IP27)	+= -Iinclude/asm-mips/mach-ip27
+cflags-$(CONFIG_SGI_IP27)	+= -I$(srctree)/arch/mips/include/asm/mach-ip27
 ifdef CONFIG_MAPPED_KERNEL
 load-$(CONFIG_SGI_IP27)		+= 0xc00000004001c000
 OBJCOPYFLAGS			:= --change-addresses=0x3fffffff80000000
@@ -460,7 +460,7 @@ ifdef CONFIG_SGI_IP28
   endif
 endif
 core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28
+cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28
 load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
 
 #
@@ -472,7 +472,7 @@ load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
 # will break.
 #
 core-$(CONFIG_SGI_IP32)		+= arch/mips/sgi-ip32/
-cflags-$(CONFIG_SGI_IP32)	+= -Iinclude/asm-mips/mach-ip32
+cflags-$(CONFIG_SGI_IP32)	+= -I$(srctree)/arch/mips/include/asm/mach-ip32
 load-$(CONFIG_SGI_IP32)		+= 0xffffffff80004000
 
 #
@@ -484,22 +484,22 @@ load-$(CONFIG_SGI_IP32)		+= 0xffffffff80004000
 #
 core-$(CONFIG_SIBYTE_BCM112X)	+= arch/mips/sibyte/sb1250/
 core-$(CONFIG_SIBYTE_BCM112X)	+= arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_BCM112X)	+= -Iinclude/asm-mips/mach-sibyte \
+cflags-$(CONFIG_SIBYTE_BCM112X)	+= -I$(srctree)/arch/mips/include/asm/mach-sibyte \
 			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
 core-$(CONFIG_SIBYTE_SB1250)	+= arch/mips/sibyte/sb1250/
 core-$(CONFIG_SIBYTE_SB1250)	+= arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte \
+cflags-$(CONFIG_SIBYTE_SB1250)	+= -I$(srctree)/arch/mips/include/asm/mach-sibyte \
 			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
 core-$(CONFIG_SIBYTE_BCM1x55)	+= arch/mips/sibyte/bcm1480/
 core-$(CONFIG_SIBYTE_BCM1x55)	+= arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_BCM1x55)	+= -Iinclude/asm-mips/mach-sibyte \
+cflags-$(CONFIG_SIBYTE_BCM1x55)	+= -I$(srctree)/arch/mips/include/asm/mach-sibyte \
 			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
 core-$(CONFIG_SIBYTE_BCM1x80)	+= arch/mips/sibyte/bcm1480/
 core-$(CONFIG_SIBYTE_BCM1x80)	+= arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -Iinclude/asm-mips/mach-sibyte \
+cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -I$(srctree)/arch/mips/include/asm/mach-sibyte \
 			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
 #
@@ -529,14 +529,14 @@ load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
 # Broadcom BCM47XX boards
 #
 core-$(CONFIG_BCM47XX)		+= arch/mips/bcm47xx/
-cflags-$(CONFIG_BCM47XX)	+= -Iinclude/asm-mips/mach-bcm47xx
+cflags-$(CONFIG_BCM47XX)	+= -I$(srctree)/arch/mips/include/asm/mach-bcm47xx
 load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
 
 #
 # SNI RM
 #
 core-$(CONFIG_SNI_RM)		+= arch/mips/sni/
-cflags-$(CONFIG_SNI_RM)		+= -Iinclude/asm-mips/mach-rm
+cflags-$(CONFIG_SNI_RM)		+= -I$(srctree)/arch/mips/include/asm/mach-rm
 ifdef CONFIG_CPU_LITTLE_ENDIAN
 load-$(CONFIG_SNI_RM)		+= 0xffffffff80600000
 else
@@ -548,10 +548,10 @@ all-$(CONFIG_SNI_RM)		:= vmlinux.ecoff
 # Common TXx9
 #
 core-$(CONFIG_MACH_TX39XX)	+= arch/mips/txx9/generic/
-cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-tx39xx
+cflags-$(CONFIG_MACH_TX39XX) += -I$(srctree)/arch/mips/include/asm/mach-tx39xx
 load-$(CONFIG_MACH_TX39XX)	+= 0xffffffff80050000
 core-$(CONFIG_MACH_TX49XX)	+= arch/mips/txx9/generic/
-cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx
+cflags-$(CONFIG_MACH_TX49XX) += -I$(srctree)/arch/mips/include/asm/mach-tx49xx
 load-$(CONFIG_MACH_TX49XX)	+= 0xffffffff80100000
 
 #
@@ -563,21 +563,17 @@ core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/txx9/jmr3927/
 # Routerboard 532 board
 #
 core-$(CONFIG_MIKROTIK_RB532)	+= arch/mips/rb532/
-cflags-$(CONFIG_MIKROTIK_RB532) += -Iinclude/asm-mips/mach-rc32434
+cflags-$(CONFIG_MIKROTIK_RB532) += -I$(srctree)/arch/mips/include/asm/mach-rc32434
 load-$(CONFIG_MIKROTIK_RB532)	+= 0xffffffff80101000
 
 #
-# Toshiba RBTX4927 board or
-# Toshiba RBTX4937 board
+# Toshiba RBTX49XX boards
 #
 core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/txx9/rbtx4927/
-
-#
-# Toshiba RBTX4938 board
-#
 core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
+core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/
 
-cflags-y			+= -Iinclude/asm-mips/mach-generic
+cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 
 ifdef CONFIG_32BIT
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/alchemy/Kconfig
index e4a057d..e4a057d 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/alchemy/Kconfig
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/alchemy/common/Makefile
index df48fd6..df48fd6 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/alchemy/common/au1xxx_irqmap.c
index c7ca159..c7ca159 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/alchemy/common/au1xxx_irqmap.c
diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index 043429d..043429d 100644
--- a/arch/mips/au1000/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/alchemy/common/cputable.c
index ba6430b..ba6430b 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/alchemy/common/cputable.c
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 601ee91..601ee91 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/alchemy/common/dma.c
index d6fbda2..d6fbda2 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
diff --git a/arch/mips/alchemy/common/gpio.c b/arch/mips/alchemy/common/gpio.c
new file mode 100644
index 0000000..e660ddd
--- /dev/null
+++ b/arch/mips/alchemy/common/gpio.c
@@ -0,0 +1,148 @@
+/*
+ *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *  	Architecture specific GPIO support
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Notes :
+ * 	au1000 SoC have only one GPIO line : GPIO1
+ * 	others have a second one : GPIO2
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/gpio.h>
+
+#define gpio1 sys
+#if !defined(CONFIG_SOC_AU1000)
+
+static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE;
+#define GPIO2_OUTPUT_ENABLE_MASK 	0x00010000
+
+static int au1xxx_gpio2_read(unsigned gpio)
+{
+	gpio -= AU1XXX_GPIO_BASE;
+	return ((gpio2->pinstate >> gpio) & 0x01);
+}
+
+static void au1xxx_gpio2_write(unsigned gpio, int value)
+{
+	gpio -= AU1XXX_GPIO_BASE;
+
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
+}
+
+static int au1xxx_gpio2_direction_input(unsigned gpio)
+{
+	gpio -= AU1XXX_GPIO_BASE;
+	gpio2->dir &= ~(0x01 << gpio);
+	return 0;
+}
+
+static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
+{
+	gpio -= AU1XXX_GPIO_BASE;
+	gpio2->dir |= 0x01 << gpio;
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
+	return 0;
+}
+
+#endif /* !defined(CONFIG_SOC_AU1000) */
+
+static int au1xxx_gpio1_read(unsigned gpio)
+{
+	return (gpio1->pinstaterd >> gpio) & 0x01;
+}
+
+static void au1xxx_gpio1_write(unsigned gpio, int value)
+{
+	if (value)
+		gpio1->outputset = (0x01 << gpio);
+	else
+		/* Output a zero */
+		gpio1->outputclr = (0x01 << gpio);
+}
+
+static int au1xxx_gpio1_direction_input(unsigned gpio)
+{
+	gpio1->pininputen = (0x01 << gpio);
+	return 0;
+}
+
+static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
+{
+	gpio1->trioutclr = (0x01 & gpio);
+	au1xxx_gpio1_write(gpio, value);
+	return 0;
+}
+
+int au1xxx_gpio_get_value(unsigned gpio)
+{
+	if (gpio >= AU1XXX_GPIO_BASE)
+#if defined(CONFIG_SOC_AU1000)
+		return 0;
+#else
+		return au1xxx_gpio2_read(gpio);
+#endif
+	else
+		return au1xxx_gpio1_read(gpio);
+}
+EXPORT_SYMBOL(au1xxx_gpio_get_value);
+
+void au1xxx_gpio_set_value(unsigned gpio, int value)
+{
+	if (gpio >= AU1XXX_GPIO_BASE)
+#if defined(CONFIG_SOC_AU1000)
+		;
+#else
+		au1xxx_gpio2_write(gpio, value);
+#endif
+	else
+		au1xxx_gpio1_write(gpio, value);
+}
+EXPORT_SYMBOL(au1xxx_gpio_set_value);
+
+int au1xxx_gpio_direction_input(unsigned gpio)
+{
+	if (gpio >= AU1XXX_GPIO_BASE)
+#if defined(CONFIG_SOC_AU1000)
+		return -ENODEV;
+#else
+		return au1xxx_gpio2_direction_input(gpio);
+#endif
+
+	return au1xxx_gpio1_direction_input(gpio);
+}
+EXPORT_SYMBOL(au1xxx_gpio_direction_input);
+
+int au1xxx_gpio_direction_output(unsigned gpio, int value)
+{
+	if (gpio >= AU1XXX_GPIO_BASE)
+#if defined(CONFIG_SOC_AU1000)
+		return -ENODEV;
+#else
+		return au1xxx_gpio2_direction_output(gpio, value);
+#endif
+
+	return au1xxx_gpio1_direction_output(gpio, value);
+}
+EXPORT_SYMBOL(au1xxx_gpio_direction_output);
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/alchemy/common/irq.c
index 40c6cec..40c6cec 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/alchemy/common/pci.c
index 7866cf5..7866cf5 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/alchemy/common/pci.c
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/alchemy/common/platform.c
index dc8a67e..dc8a67e 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/alchemy/common/power.c
index bd854a6..bd854a6 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/alchemy/common/power.c
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/alchemy/common/prom.c
index 18b310b..18b310b 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/alchemy/common/prom.c
diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/alchemy/common/puts.c
index 55bbe24..55bbe24 100644
--- a/arch/mips/au1000/common/puts.c
+++ b/arch/mips/alchemy/common/puts.c
diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/alchemy/common/reset.c
index d555429..d555429 100644
--- a/arch/mips/au1000/common/reset.c
+++ b/arch/mips/alchemy/common/reset.c
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/alchemy/common/setup.c
index 1ac6b06..1ac6b06 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
new file mode 100644
index 0000000..3006e27
--- /dev/null
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2002 Embedded Edge, LLC
+ * Author: dan@embeddededge.com
+ *
+ * Sleep helper for Au1xxx sleep mode.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+	.text
+	.set	macro
+	.set	noat
+	.align	5
+
+/* Save all of the processor general registers and go to sleep.
+ * A wakeup condition will get us back here to restore the registers.
+ */
+LEAF(save_and_sleep)
+
+	subu	sp, PT_SIZE
+	sw	$1, PT_R1(sp)
+	sw	$2, PT_R2(sp)
+	sw	$3, PT_R3(sp)
+	sw	$4, PT_R4(sp)
+	sw	$5, PT_R5(sp)
+	sw	$6, PT_R6(sp)
+	sw	$7, PT_R7(sp)
+	sw	$8, PT_R8(sp)
+	sw	$9, PT_R9(sp)
+	sw	$10, PT_R10(sp)
+	sw	$11, PT_R11(sp)
+	sw	$12, PT_R12(sp)
+	sw	$13, PT_R13(sp)
+	sw	$14, PT_R14(sp)
+	sw	$15, PT_R15(sp)
+	sw	$16, PT_R16(sp)
+	sw	$17, PT_R17(sp)
+	sw	$18, PT_R18(sp)
+	sw	$19, PT_R19(sp)
+	sw	$20, PT_R20(sp)
+	sw	$21, PT_R21(sp)
+	sw	$22, PT_R22(sp)
+	sw	$23, PT_R23(sp)
+	sw	$24, PT_R24(sp)
+	sw	$25, PT_R25(sp)
+	sw	$26, PT_R26(sp)
+	sw	$27, PT_R27(sp)
+	sw	$28, PT_R28(sp)
+	sw	$29, PT_R29(sp)
+	sw	$30, PT_R30(sp)
+	sw	$31, PT_R31(sp)
+	mfc0	k0, CP0_STATUS
+	sw	k0, 0x20(sp)
+	mfc0	k0, CP0_CONTEXT
+	sw	k0, 0x1c(sp)
+	mfc0	k0, CP0_PAGEMASK
+	sw	k0, 0x18(sp)
+	mfc0	k0, CP0_CONFIG
+	sw	k0, 0x14(sp)
+
+	/* Now set up the scratch registers so the boot rom will
+	 * return to this point upon wakeup.
+	 */
+	la	k0, 1f
+	lui	k1, 0xb190
+	ori	k1, 0x18
+	sw	sp, 0(k1)
+	ori 	k1, 0x1c
+	sw	k0, 0(k1)
+
+/* Put SDRAM into self refresh.  Preload instructions into cache,
+ * issue a precharge, then auto refresh, then sleep commands to it.
+ */
+	la	t0, sdsleep
+	.set	mips3
+	cache	0x14, 0(t0)
+	cache	0x14, 32(t0)
+	cache	0x14, 64(t0)
+	cache	0x14, 96(t0)
+	.set	mips0
+
+sdsleep:
+	lui 	k0, 0xb400
+	sw	zero, 0x001c(k0)	/* Precharge */
+	sw	zero, 0x0020(k0)	/* Auto refresh */
+	sw	zero, 0x0030(k0)	/* SDRAM sleep */
+	sync
+
+	lui 	k1, 0xb190
+	sw	zero, 0x0078(k1)	/* get ready  to sleep */
+	sync
+	sw	zero, 0x007c(k1)	/* Put processor to sleep */
+	sync
+
+	/* This is where we return upon wakeup.
+	 * Reload all of the registers and return.
+	 */
+1:	nop
+	lw	k0, 0x20(sp)
+	mtc0	k0, CP0_STATUS
+	lw	k0, 0x1c(sp)
+	mtc0	k0, CP0_CONTEXT
+	lw	k0, 0x18(sp)
+	mtc0	k0, CP0_PAGEMASK
+	lw	k0, 0x14(sp)
+	mtc0	k0, CP0_CONFIG
+
+	/* We need to catch the ealry Alchemy SOCs with
+	 * the write-only Config[OD] bit and set it back to one...
+	 */
+	jal	au1x00_fixup_config_od
+	lw	$1, PT_R1(sp)
+	lw	$2, PT_R2(sp)
+	lw	$3, PT_R3(sp)
+	lw	$4, PT_R4(sp)
+	lw	$5, PT_R5(sp)
+	lw	$6, PT_R6(sp)
+	lw	$7, PT_R7(sp)
+	lw	$8, PT_R8(sp)
+	lw	$9, PT_R9(sp)
+	lw	$10, PT_R10(sp)
+	lw	$11, PT_R11(sp)
+	lw	$12, PT_R12(sp)
+	lw	$13, PT_R13(sp)
+	lw	$14, PT_R14(sp)
+	lw	$15, PT_R15(sp)
+	lw	$16, PT_R16(sp)
+	lw	$17, PT_R17(sp)
+	lw	$18, PT_R18(sp)
+	lw	$19, PT_R19(sp)
+	lw	$20, PT_R20(sp)
+	lw	$21, PT_R21(sp)
+	lw	$22, PT_R22(sp)
+	lw	$23, PT_R23(sp)
+	lw	$24, PT_R24(sp)
+	lw	$25, PT_R25(sp)
+	lw	$26, PT_R26(sp)
+	lw	$27, PT_R27(sp)
+	lw	$28, PT_R28(sp)
+	lw	$29, PT_R29(sp)
+	lw	$30, PT_R30(sp)
+	lw	$31, PT_R31(sp)
+	addiu	sp, PT_SIZE
+
+	jr	ra
+END(save_and_sleep)
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/alchemy/common/time.c
index 563d939..563d939 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/alchemy/common/time.c
diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/alchemy/db1x00/Makefile
index 274db3b..274db3b 100644
--- a/arch/mips/au1000/db1x00/Makefile
+++ b/arch/mips/alchemy/db1x00/Makefile
diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/alchemy/db1x00/board_setup.c
index 9e5ccbb..9e5ccbb 100644
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ b/arch/mips/alchemy/db1x00/board_setup.c
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/alchemy/db1x00/init.c
index 8474135..8474135 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/alchemy/db1x00/init.c
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/alchemy/db1x00/irqmap.c
index 94c090e..94c090e 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/alchemy/db1x00/irqmap.c
diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile
index 7c67b3d..7c67b3d 100644
--- a/arch/mips/au1000/mtx-1/Makefile
+++ b/arch/mips/alchemy/mtx-1/Makefile
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 3f80791..3f80791 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
index 3bae13c..3bae13c 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/alchemy/mtx-1/init.c
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c
index f2bf029..f2bf029 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/alchemy/mtx-1/irqmap.c
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 8b5914d..8b5914d 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
diff --git a/arch/mips/au1000/pb1000/Makefile b/arch/mips/alchemy/pb1000/Makefile
index 99bbec0..99bbec0 100644
--- a/arch/mips/au1000/pb1000/Makefile
+++ b/arch/mips/alchemy/pb1000/Makefile
diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/alchemy/pb1000/board_setup.c
index 25df167..25df167 100644
--- a/arch/mips/au1000/pb1000/board_setup.c
+++ b/arch/mips/alchemy/pb1000/board_setup.c
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/alchemy/pb1000/init.c
index 8a9c7d5..8a9c7d5 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/alchemy/pb1000/init.c
diff --git a/arch/mips/au1000/pb1000/irqmap.c b/arch/mips/alchemy/pb1000/irqmap.c
index b3d56b0..b3d56b0 100644
--- a/arch/mips/au1000/pb1000/irqmap.c
+++ b/arch/mips/alchemy/pb1000/irqmap.c
diff --git a/arch/mips/au1000/pb1100/Makefile b/arch/mips/alchemy/pb1100/Makefile
index 793e97c..793e97c 100644
--- a/arch/mips/au1000/pb1100/Makefile
+++ b/arch/mips/alchemy/pb1100/Makefile
diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/alchemy/pb1100/board_setup.c
index c0bfd59..c0bfd59 100644
--- a/arch/mips/au1000/pb1100/board_setup.c
+++ b/arch/mips/alchemy/pb1100/board_setup.c
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/alchemy/pb1100/init.c
index 7c67923..7c67923 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/alchemy/pb1100/init.c
diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/alchemy/pb1100/irqmap.c
index 9b7dd8b..9b7dd8b 100644
--- a/arch/mips/au1000/pb1100/irqmap.c
+++ b/arch/mips/alchemy/pb1100/irqmap.c
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/alchemy/pb1200/Makefile
index d678adf..d678adf 100644
--- a/arch/mips/au1000/pb1200/Makefile
+++ b/arch/mips/alchemy/pb1200/Makefile
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/alchemy/pb1200/board_setup.c
index 6cb21150..6cb21150 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/alchemy/pb1200/board_setup.c
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/alchemy/pb1200/init.c
index e9b2a0f..e9b2a0f 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/alchemy/pb1200/init.c
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/alchemy/pb1200/irqmap.c
index 2a505ad..2a505ad 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/alchemy/pb1200/irqmap.c
diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/alchemy/pb1200/platform.c
index f8fb0ae..f8fb0ae 100644
--- a/arch/mips/au1000/pb1200/platform.c
+++ b/arch/mips/alchemy/pb1200/platform.c
diff --git a/arch/mips/au1000/pb1500/Makefile b/arch/mips/alchemy/pb1500/Makefile
index 602f38d..602f38d 100644
--- a/arch/mips/au1000/pb1500/Makefile
+++ b/arch/mips/alchemy/pb1500/Makefile
diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/alchemy/pb1500/board_setup.c
index 035771c..035771c 100644
--- a/arch/mips/au1000/pb1500/board_setup.c
+++ b/arch/mips/alchemy/pb1500/board_setup.c
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/alchemy/pb1500/init.c
index 3b6e395..3b6e395 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/alchemy/pb1500/init.c
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/alchemy/pb1500/irqmap.c
index 39c4682..39c4682 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/alchemy/pb1500/irqmap.c
diff --git a/arch/mips/au1000/pb1550/Makefile b/arch/mips/alchemy/pb1550/Makefile
index 7d8beca..7d8beca 100644
--- a/arch/mips/au1000/pb1550/Makefile
+++ b/arch/mips/alchemy/pb1550/Makefile
diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/alchemy/pb1550/board_setup.c
index 0ed76b6..0ed76b6 100644
--- a/arch/mips/au1000/pb1550/board_setup.c
+++ b/arch/mips/alchemy/pb1550/board_setup.c
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/alchemy/pb1550/init.c
index e1055a1..e1055a1 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/alchemy/pb1550/init.c
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/alchemy/pb1550/irqmap.c
index a02a4d1..a02a4d1 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/alchemy/pb1550/irqmap.c
diff --git a/arch/mips/au1000/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile
index db3c526..db3c526 100644
--- a/arch/mips/au1000/xxs1500/Makefile
+++ b/arch/mips/alchemy/xxs1500/Makefile
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 4c587ac..4c587ac 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
index 7516434..7516434 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/alchemy/xxs1500/init.c
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c
index edf06ed..edf06ed 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/alchemy/xxs1500/irqmap.c
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
deleted file mode 100644
index b485d94..0000000
--- a/arch/mips/au1000/common/gpio.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- *  	Architecture specific GPIO support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  Notes :
- * 	au1000 SoC have only one GPIO line : GPIO1
- * 	others have a second one : GPIO2
- */
-
-#include <linux/module.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/gpio.h>
-
-#define gpio1 sys
-#if !defined(CONFIG_SOC_AU1000)
-
-static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE;
-#define GPIO2_OUTPUT_ENABLE_MASK 	0x00010000
-
-static int au1xxx_gpio2_read(unsigned gpio)
-{
-	gpio -= AU1XXX_GPIO_BASE;
-	return ((gpio2->pinstate >> gpio) & 0x01);
-}
-
-static void au1xxx_gpio2_write(unsigned gpio, int value)
-{
-	gpio -= AU1XXX_GPIO_BASE;
-
-	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
-}
-
-static int au1xxx_gpio2_direction_input(unsigned gpio)
-{
-	gpio -= AU1XXX_GPIO_BASE;
-	gpio2->dir &= ~(0x01 << gpio);
-	return 0;
-}
-
-static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
-{
-	gpio -= AU1XXX_GPIO_BASE;
-	gpio2->dir = (0x01 << gpio) | (value << gpio);
-	return 0;
-}
-
-#endif /* !defined(CONFIG_SOC_AU1000) */
-
-static int au1xxx_gpio1_read(unsigned gpio)
-{
-	return (gpio1->pinstaterd >> gpio) & 0x01;
-}
-
-static void au1xxx_gpio1_write(unsigned gpio, int value)
-{
-	if (value)
-		gpio1->outputset = (0x01 << gpio);
-	else
-		/* Output a zero */
-		gpio1->outputclr = (0x01 << gpio);
-}
-
-static int au1xxx_gpio1_direction_input(unsigned gpio)
-{
-	gpio1->pininputen = (0x01 << gpio);
-	return 0;
-}
-
-static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
-{
-	gpio1->trioutclr = (0x01 & gpio);
-	return 0;
-}
-
-int au1xxx_gpio_get_value(unsigned gpio)
-{
-	if (gpio >= AU1XXX_GPIO_BASE)
-#if defined(CONFIG_SOC_AU1000)
-		return 0;
-#else
-		return au1xxx_gpio2_read(gpio);
-#endif
-	else
-		return au1xxx_gpio1_read(gpio);
-}
-EXPORT_SYMBOL(au1xxx_gpio_get_value);
-
-void au1xxx_gpio_set_value(unsigned gpio, int value)
-{
-	if (gpio >= AU1XXX_GPIO_BASE)
-#if defined(CONFIG_SOC_AU1000)
-		;
-#else
-		au1xxx_gpio2_write(gpio, value);
-#endif
-	else
-		au1xxx_gpio1_write(gpio, value);
-}
-EXPORT_SYMBOL(au1xxx_gpio_set_value);
-
-int au1xxx_gpio_direction_input(unsigned gpio)
-{
-	if (gpio >= AU1XXX_GPIO_BASE)
-#if defined(CONFIG_SOC_AU1000)
-		return -ENODEV;
-#else
-		return au1xxx_gpio2_direction_input(gpio);
-#endif
-
-	return au1xxx_gpio1_direction_input(gpio);
-}
-EXPORT_SYMBOL(au1xxx_gpio_direction_input);
-
-int au1xxx_gpio_direction_output(unsigned gpio, int value)
-{
-	if (gpio >= AU1XXX_GPIO_BASE)
-#if defined(CONFIG_SOC_AU1000)
-		return -ENODEV;
-#else
-		return au1xxx_gpio2_direction_output(gpio, value);
-#endif
-
-	return au1xxx_gpio1_direction_output(gpio, value);
-}
-EXPORT_SYMBOL(au1xxx_gpio_direction_output);
diff --git a/arch/mips/au1000/common/sleeper.S b/arch/mips/au1000/common/sleeper.S
deleted file mode 100644
index 4b3cf02..0000000
--- a/arch/mips/au1000/common/sleeper.S
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Copyright 2002 Embedded Edge, LLC
- * Author: dan@embeddededge.com
- *
- * Sleep helper for Au1xxx sleep mode.
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-	.text
-	.set	macro
-	.set	noat
-	.align	5
-
-/* Save all of the processor general registers and go to sleep.
- * A wakeup condition will get us back here to restore the registers.
- */
-LEAF(save_and_sleep)
-
-	subu	sp, PT_SIZE
-	sw	$1, PT_R1(sp)
-	sw	$2, PT_R2(sp)
-	sw	$3, PT_R3(sp)
-	sw	$4, PT_R4(sp)
-	sw	$5, PT_R5(sp)
-	sw	$6, PT_R6(sp)
-	sw	$7, PT_R7(sp)
-	sw	$8, PT_R8(sp)
-	sw	$9, PT_R9(sp)
-	sw	$10, PT_R10(sp)
-	sw	$11, PT_R11(sp)
-	sw	$12, PT_R12(sp)
-	sw	$13, PT_R13(sp)
-	sw	$14, PT_R14(sp)
-	sw	$15, PT_R15(sp)
-	sw	$16, PT_R16(sp)
-	sw	$17, PT_R17(sp)
-	sw	$18, PT_R18(sp)
-	sw	$19, PT_R19(sp)
-	sw	$20, PT_R20(sp)
-	sw	$21, PT_R21(sp)
-	sw	$22, PT_R22(sp)
-	sw	$23, PT_R23(sp)
-	sw	$24, PT_R24(sp)
-	sw	$25, PT_R25(sp)
-	sw	$26, PT_R26(sp)
-	sw	$27, PT_R27(sp)
-	sw	$28, PT_R28(sp)
-	sw	$29, PT_R29(sp)
-	sw	$30, PT_R30(sp)
-	sw	$31, PT_R31(sp)
-	mfc0	k0, CP0_STATUS
-	sw	k0, 0x20(sp)
-	mfc0	k0, CP0_CONTEXT
-	sw	k0, 0x1c(sp)
-	mfc0	k0, CP0_PAGEMASK
-	sw	k0, 0x18(sp)
-	mfc0	k0, CP0_CONFIG
-	sw	k0, 0x14(sp)
-
-	/* Now set up the scratch registers so the boot rom will
-	 * return to this point upon wakeup.
-	 */
-	la	k0, 1f
-	lui	k1, 0xb190
-	ori	k1, 0x18
-	sw	sp, 0(k1)
-	ori 	k1, 0x1c
-	sw	k0, 0(k1)
-
-/* Put SDRAM into self refresh.  Preload instructions into cache,
- * issue a precharge, then auto refresh, then sleep commands to it.
- */
- 	la	t0, sdsleep
-	.set	mips3
- 	cache	0x14, 0(t0)
- 	cache	0x14, 32(t0)
- 	cache	0x14, 64(t0)
- 	cache	0x14, 96(t0)
-	.set	mips0
-
-sdsleep:
-	lui 	k0, 0xb400
-	sw	zero, 0x001c(k0)	/* Precharge */
-	sw	zero, 0x0020(k0)	/* Auto refresh */
-	sw	zero, 0x0030(k0)	/* SDRAM sleep */
-	sync
-
-	lui 	k1, 0xb190
-	sw	zero, 0x0078(k1)	/* get ready  to sleep */
-	sync
-	sw	zero, 0x007c(k1)	/* Put processor to sleep */
-	sync
-
-	/* This is where we return upon wakeup.
-	 * Reload all of the registers and return.
-	 */
-1:	nop
-	lw	k0, 0x20(sp)
-	mtc0	k0, CP0_STATUS
-	lw	k0, 0x1c(sp)
-	mtc0	k0, CP0_CONTEXT
-	lw	k0, 0x18(sp)
-	mtc0	k0, CP0_PAGEMASK
-	lw	k0, 0x14(sp)
-	mtc0	k0, CP0_CONFIG
-
-	/* We need to catch the ealry Alchemy SOCs with
-	 * the write-only Config[OD] bit and set it back to one...
-	 */
-	jal	au1x00_fixup_config_od
-	lw	$1, PT_R1(sp)
-	lw	$2, PT_R2(sp)
-	lw	$3, PT_R3(sp)
-	lw	$4, PT_R4(sp)
-	lw	$5, PT_R5(sp)
-	lw	$6, PT_R6(sp)
-	lw	$7, PT_R7(sp)
-	lw	$8, PT_R8(sp)
-	lw	$9, PT_R9(sp)
-	lw	$10, PT_R10(sp)
-	lw	$11, PT_R11(sp)
-	lw	$12, PT_R12(sp)
-	lw	$13, PT_R13(sp)
-	lw	$14, PT_R14(sp)
-	lw	$15, PT_R15(sp)
-	lw	$16, PT_R16(sp)
-	lw	$17, PT_R17(sp)
-	lw	$18, PT_R18(sp)
-	lw	$19, PT_R19(sp)
-	lw	$20, PT_R20(sp)
-	lw	$21, PT_R21(sp)
-	lw	$22, PT_R22(sp)
-	lw	$23, PT_R23(sp)
-	lw	$24, PT_R24(sp)
-	lw	$25, PT_R25(sp)
-	lw	$26, PT_R26(sp)
-	lw	$27, PT_R27(sp)
-	lw	$28, PT_R28(sp)
-	lw	$29, PT_R29(sp)
-	lw	$30, PT_R30(sp)
-	lw	$31, PT_R31(sp)
-	addiu	sp, PT_SIZE
-
-	jr	ra
-END(save_and_sleep)
diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c
index f5a53ac..9b79880 100644
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -12,68 +12,51 @@
 #include <asm/mach-bcm47xx/bcm47xx.h>
 #include <asm/mach-bcm47xx/gpio.h>
 
-int bcm47xx_gpio_to_irq(unsigned gpio)
+#if (BCM47XX_CHIPCO_GPIO_LINES > BCM47XX_EXTIF_GPIO_LINES)
+static DECLARE_BITMAP(gpio_in_use, BCM47XX_CHIPCO_GPIO_LINES);
+#else
+static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
+#endif
+
+int gpio_request(unsigned gpio, const char *tag)
 {
-	if (ssb_bcm47xx.chipco.dev)
-		return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
-	else if (ssb_bcm47xx.extif.dev)
-		return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
-	else
+	if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
+	    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
 		return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(bcm47xx_gpio_to_irq);
 
-int bcm47xx_gpio_get_value(unsigned gpio)
-{
-	if (ssb_bcm47xx.chipco.dev)
-		return ssb_chipco_gpio_in(&ssb_bcm47xx.chipco, 1 << gpio);
-	else if (ssb_bcm47xx.extif.dev)
-		return ssb_extif_gpio_in(&ssb_bcm47xx.extif, 1 << gpio);
-	else
-		return 0;
-}
-EXPORT_SYMBOL_GPL(bcm47xx_gpio_get_value);
+	if (ssb_extif_available(&ssb_bcm47xx.extif) &&
+	    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+		return -EINVAL;
 
-void bcm47xx_gpio_set_value(unsigned gpio, int value)
-{
-	if (ssb_bcm47xx.chipco.dev)
-		ssb_chipco_gpio_out(&ssb_bcm47xx.chipco,
-				    1 << gpio,
-				    value ? 1 << gpio : 0);
-	else if (ssb_bcm47xx.extif.dev)
-		ssb_extif_gpio_out(&ssb_bcm47xx.extif,
-				   1 << gpio,
-				   value ? 1 << gpio : 0);
-}
-EXPORT_SYMBOL_GPL(bcm47xx_gpio_set_value);
+	if (test_and_set_bit(gpio, gpio_in_use))
+		return -EBUSY;
 
-int bcm47xx_gpio_direction_input(unsigned gpio)
-{
-	if (ssb_bcm47xx.chipco.dev && (gpio < BCM47XX_CHIPCO_GPIO_LINES))
-		ssb_chipco_gpio_outen(&ssb_bcm47xx.chipco,
-				      1 << gpio, 0);
-	else if (ssb_bcm47xx.extif.dev && (gpio < BCM47XX_EXTIF_GPIO_LINES))
-		ssb_extif_gpio_outen(&ssb_bcm47xx.extif,
-				     1 << gpio, 0);
-	else
-		return -EINVAL;
 	return 0;
 }
-EXPORT_SYMBOL_GPL(bcm47xx_gpio_direction_input);
+EXPORT_SYMBOL(gpio_request);
 
-int bcm47xx_gpio_direction_output(unsigned gpio, int value)
+void gpio_free(unsigned gpio)
 {
-	bcm47xx_gpio_set_value(gpio, value);
+	if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
+	    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+		return;
+
+	if (ssb_extif_available(&ssb_bcm47xx.extif) &&
+	    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+		return;
+
+	clear_bit(gpio, gpio_in_use);
+}
+EXPORT_SYMBOL(gpio_free);
 
-	if (ssb_bcm47xx.chipco.dev && (gpio < BCM47XX_CHIPCO_GPIO_LINES))
-		ssb_chipco_gpio_outen(&ssb_bcm47xx.chipco,
-				      1 << gpio, 1 << gpio);
-	else if (ssb_bcm47xx.extif.dev && (gpio < BCM47XX_EXTIF_GPIO_LINES))
-		ssb_extif_gpio_outen(&ssb_bcm47xx.extif,
-				     1 << gpio, 1 << gpio);
+int gpio_to_irq(unsigned gpio)
+{
+	if (ssb_chipco_available(&ssb_bcm47xx.chipco))
+		return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
+	else if (ssb_extif_available(&ssb_bcm47xx.extif))
+		return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
 	else
 		return -EINVAL;
-	return 0;
 }
-EXPORT_SYMBOL_GPL(bcm47xx_gpio_direction_output);
+EXPORT_SYMBOL_GPL(gpio_to_irq);
 
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 8d36f18..2f580fa 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -27,6 +27,7 @@
 
 #include <linux/types.h>
 #include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_embedded.h>
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
@@ -41,7 +42,7 @@ static void bcm47xx_machine_restart(char *command)
 	printk(KERN_ALERT "Please stand by while rebooting the system...\n");
 	local_irq_disable();
 	/* Set the watchdog timer to reset immediately */
-	ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 1);
+	ssb_watchdog_timer_set(&ssb_bcm47xx, 1);
 	while (1)
 		cpu_relax();
 }
@@ -50,7 +51,7 @@ static void bcm47xx_machine_halt(void)
 {
 	/* Disable interrupts and watchdog and spin forever */
 	local_irq_disable();
-	ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 0);
+	ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
 	while (1)
 		cpu_relax();
 }
diff --git a/arch/mips/bcm47xx/wgt634u.c b/arch/mips/bcm47xx/wgt634u.c
index d1d90c9e..ef00e7f 100644
--- a/arch/mips/bcm47xx/wgt634u.c
+++ b/arch/mips/bcm47xx/wgt634u.c
@@ -11,6 +11,9 @@
 #include <linux/leds.h>
 #include <linux/mtd/physmap.h>
 #include <linux/ssb/ssb.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/gpio.h>
 #include <asm/mach-bcm47xx/bcm47xx.h>
 
 /* GPIO definitions for the WGT634U */
@@ -99,6 +102,30 @@ static struct platform_device *wgt634u_devices[] __initdata = {
 	&wgt634u_gpio_leds,
 };
 
+static irqreturn_t gpio_interrupt(int irq, void *ignored)
+{
+	int state;
+
+	/* Interrupts are shared, check if the current one is
+	   a GPIO interrupt. */
+	if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
+				   SSB_CHIPCO_IRQ_GPIO))
+		return IRQ_NONE;
+
+	state = gpio_get_value(WGT634U_GPIO_RESET);
+
+	/* Interrupt are level triggered, revert the interrupt polarity
+	   to clear the interrupt. */
+	gpio_polarity(WGT634U_GPIO_RESET, state);
+
+	if (!state) {
+		printk(KERN_INFO "Reset button pressed");
+		ctrl_alt_del();
+	}
+
+	return IRQ_HANDLED;
+}
+
 static int __init wgt634u_init(void)
 {
 	/* There is no easy way to detect that we are running on a WGT634U
@@ -112,6 +139,19 @@ static int __init wgt634u_init(void)
 	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
 	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
 		struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+
+		printk(KERN_INFO "WGT634U machine detected.\n");
+
+		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+				 gpio_interrupt, IRQF_SHARED,
+				 "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
+			gpio_direction_input(WGT634U_GPIO_RESET);
+			gpio_intmask(WGT634U_GPIO_RESET, 1);
+			ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
+					    SSB_CHIPCO_IRQ_GPIO,
+					    SSB_CHIPCO_IRQ_GPIO);
+		}
+
 		wgt634u_flash_data.width = mcore->flash_buswidth;
 		wgt634u_flash_resource.start = mcore->flash_window;
 		wgt634u_flash_resource.end = mcore->flash_window
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index 3965fda..1359c03 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -45,12 +45,12 @@ unsigned long read_persistent_clock(void)
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		sec = BCD2BIN(sec);
-		min = BCD2BIN(min);
-		hour = BCD2BIN(hour);
-		day = BCD2BIN(day);
-		mon = BCD2BIN(mon);
-		year = BCD2BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 	}
 
 	year += real_year - 72 + 2000;
@@ -83,7 +83,7 @@ int rtc_mips_set_mmss(unsigned long nowtime)
 
 	cmos_minutes = CMOS_READ(RTC_MINUTES);
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		cmos_minutes = BCD2BIN(cmos_minutes);
+		cmos_minutes = bcd2bin(cmos_minutes);
 
 	/*
 	 * since we're only adjusting minutes and seconds,
@@ -99,8 +99,8 @@ int rtc_mips_set_mmss(unsigned long nowtime)
 
 	if (abs(real_minutes - cmos_minutes) < 30) {
 		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			real_seconds = BIN2BCD(real_seconds);
-			real_minutes = BIN2BCD(real_minutes);
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
 		}
 		CMOS_WRITE(real_seconds, RTC_SECONDS);
 		CMOS_WRITE(real_minutes, RTC_MINUTES);
diff --git a/arch/mips/emma2rh/common/irq.c b/arch/mips/emma2rh/common/irq.c
index d956047..91cbd95 100644
--- a/arch/mips/emma2rh/common/irq.c
+++ b/arch/mips/emma2rh/common/irq.c
@@ -29,7 +29,6 @@
 
 #include <asm/system.h>
 #include <asm/mipsregs.h>
-#include <asm/debug.h>
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
diff --git a/arch/mips/emma2rh/common/prom.c b/arch/mips/emma2rh/common/prom.c
index 5e92b3a..e14a2e3 100644
--- a/arch/mips/emma2rh/common/prom.c
+++ b/arch/mips/emma2rh/common/prom.c
@@ -30,7 +30,6 @@
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 #include <asm/emma2rh/emma2rh.h>
-#include <asm/debug.h>
 
 const char *get_system_type(void)
 {
diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c
index d70627d..fb9cda2 100644
--- a/arch/mips/emma2rh/markeins/platform.c
+++ b/arch/mips/emma2rh/markeins/platform.c
@@ -35,7 +35,6 @@
 #include <asm/irq.h>
 #include <asm/reboot.h>
 #include <asm/traps.h>
-#include <asm/debug.h>
 
 #include <asm/emma2rh/emma2rh.h>
 
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
new file mode 100644
index 0000000..7897f05
--- /dev/null
+++ b/arch/mips/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += cachectl.h sgidefs.h sysmips.h
diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h
new file mode 100644
index 0000000..1dd74fb
--- /dev/null
+++ b/arch/mips/include/asm/abi.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005, 06 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_ABI_H
+#define _ASM_ABI_H
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+struct mips_abi {
+	int (* const setup_frame)(struct k_sigaction * ka,
+	                          struct pt_regs *regs, int signr,
+	                          sigset_t *set);
+	int (* const setup_rt_frame)(struct k_sigaction * ka,
+	                       struct pt_regs *regs, int signr,
+	                       sigset_t *set, siginfo_t *info);
+	const unsigned long	restart;
+};
+
+#endif /* _ASM_ABI_H */
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
new file mode 100644
index 0000000..569f80a
--- /dev/null
+++ b/arch/mips/include/asm/addrspace.h
@@ -0,0 +1,154 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999 by Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ADDRSPACE_H
+#define _ASM_ADDRSPACE_H
+
+#include <spaces.h>
+
+/*
+ *  Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ATYPE_
+#define _ATYPE32_
+#define _ATYPE64_
+#define _CONST64_(x)	x
+#else
+#define _ATYPE_		__PTRDIFF_TYPE__
+#define _ATYPE32_	int
+#define _ATYPE64_	__s64
+#ifdef CONFIG_64BIT
+#define _CONST64_(x)	x ## L
+#else
+#define _CONST64_(x)	x ## LL
+#endif
+#endif
+
+/*
+ *  32-bit MIPS address spaces
+ */
+#ifdef __ASSEMBLY__
+#define _ACAST32_
+#define _ACAST64_
+#else
+#define _ACAST32_		(_ATYPE_)(_ATYPE32_)	/* widen if necessary */
+#define _ACAST64_		(_ATYPE64_)		/* do _not_ narrow */
+#endif
+
+/*
+ * Returns the kernel segment base of a given address
+ */
+#define KSEGX(a)		((_ACAST32_ (a)) & 0xe0000000)
+
+/*
+ * Returns the physical address of a CKSEGx / XKPHYS address
+ */
+#define CPHYSADDR(a)		((_ACAST32_(a)) & 0x1fffffff)
+#define XPHYSADDR(a)            ((_ACAST64_(a)) &			\
+				 _CONST64_(0x000000ffffffffff))
+
+#ifdef CONFIG_64BIT
+
+/*
+ * Memory segments (64bit kernel mode addresses)
+ * The compatibility segments use the full 64-bit sign extended value.  Note
+ * the R8000 doesn't have them so don't reference these in generic MIPS code.
+ */
+#define XKUSEG			_CONST64_(0x0000000000000000)
+#define XKSSEG			_CONST64_(0x4000000000000000)
+#define XKPHYS			_CONST64_(0x8000000000000000)
+#define XKSEG			_CONST64_(0xc000000000000000)
+#define CKSEG0			_CONST64_(0xffffffff80000000)
+#define CKSEG1			_CONST64_(0xffffffffa0000000)
+#define CKSSEG			_CONST64_(0xffffffffc0000000)
+#define CKSEG3			_CONST64_(0xffffffffe0000000)
+
+#define CKSEG0ADDR(a)		(CPHYSADDR(a) | CKSEG0)
+#define CKSEG1ADDR(a)		(CPHYSADDR(a) | CKSEG1)
+#define CKSEG2ADDR(a)		(CPHYSADDR(a) | CKSEG2)
+#define CKSEG3ADDR(a)		(CPHYSADDR(a) | CKSEG3)
+
+#else
+
+#define CKSEG0ADDR(a)		(CPHYSADDR(a) | KSEG0)
+#define CKSEG1ADDR(a)		(CPHYSADDR(a) | KSEG1)
+#define CKSEG2ADDR(a)		(CPHYSADDR(a) | KSEG2)
+#define CKSEG3ADDR(a)		(CPHYSADDR(a) | KSEG3)
+
+/*
+ * Map an address to a certain kernel segment
+ */
+#define KSEG0ADDR(a)		(CPHYSADDR(a) | KSEG0)
+#define KSEG1ADDR(a)		(CPHYSADDR(a) | KSEG1)
+#define KSEG2ADDR(a)		(CPHYSADDR(a) | KSEG2)
+#define KSEG3ADDR(a)		(CPHYSADDR(a) | KSEG3)
+
+/*
+ * Memory segments (32bit kernel mode addresses)
+ * These are the traditional names used in the 32-bit universe.
+ */
+#define KUSEG			0x00000000
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+#define KSEG2			0xc0000000
+#define KSEG3			0xe0000000
+
+#define CKUSEG			0x00000000
+#define CKSEG0			0x80000000
+#define CKSEG1			0xa0000000
+#define CKSEG2			0xc0000000
+#define CKSEG3			0xe0000000
+
+#endif
+
+/*
+ * Cache modes for XKPHYS address conversion macros
+ */
+#define K_CALG_COH_EXCL1_NOL2	0
+#define K_CALG_COH_SHRL1_NOL2	1
+#define K_CALG_UNCACHED		2
+#define K_CALG_NONCOHERENT	3
+#define K_CALG_COH_EXCL		4
+#define K_CALG_COH_SHAREABLE	5
+#define K_CALG_NOTUSED		6
+#define K_CALG_UNCACHED_ACCEL	7
+
+/*
+ * 64-bit address conversions
+ */
+#define PHYS_TO_XKSEG_UNCACHED(p)	PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p))
+#define PHYS_TO_XKSEG_CACHED(p)		PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p))
+#define XKPHYS_TO_PHYS(p)		((p) & TO_PHYS_MASK)
+#define PHYS_TO_XKPHYS(cm, a)		(_CONST64_(0x8000000000000000) | \
+					 (_CONST64_(cm) << 59) | (a))
+
+/*
+ * The ultimate limited of the 64-bit MIPS architecture:  2 bits for selecting
+ * the region, 3 bits for the CCA mode.  This leaves 59 bits of which the
+ * R8000 implements most with its 48-bit physical address space.
+ */
+#define TO_PHYS_MASK	_CONST64_(0x07ffffffffffffff)	/* 2^^59 - 1 */
+
+#ifndef CONFIG_CPU_R8000
+
+/*
+ * The R8000 doesn't have the 32-bit compat spaces so we don't define them
+ * in order to catch bugs in the source code.
+ */
+
+#define COMPAT_K1BASE32		_CONST64_(0xffffffffa0000000)
+#define PHYS_TO_COMPATK1(x)	((x) | COMPAT_K1BASE32) /* 32-bit compat k1 */
+
+#endif
+
+#define KDM_TO_PHYS(x)		(_ACAST64_ (x) & TO_PHYS_MASK)
+#define PHYS_TO_K0(x)		(_ACAST64_ (x) | CAC_BASE)
+
+#endif /* _ASM_ADDRSPACE_H */
diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
new file mode 100644
index 0000000..608cfcf
--- /dev/null
+++ b/arch/mips/include/asm/asm.h
@@ -0,0 +1,409 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2002  Maciej W. Rozycki
+ *
+ * Some useful macros for MIPS assembler code
+ *
+ * Some of the routines below contain useless nops that will be optimized
+ * away by gas in -O mode. These nops are however required to fill delay
+ * slots in noreorder mode.
+ */
+#ifndef __ASM_ASM_H
+#define __ASM_ASM_H
+
+#include <asm/sgidefs.h>
+
+#ifndef CAT
+#ifdef __STDC__
+#define __CAT(str1, str2) str1##str2
+#else
+#define __CAT(str1, str2) str1/**/str2
+#endif
+#define CAT(str1, str2) __CAT(str1, str2)
+#endif
+
+/*
+ * PIC specific declarations
+ * Not used for the kernel but here seems to be the right place.
+ */
+#ifdef __PIC__
+#define CPRESTORE(register)                             \
+		.cprestore register
+#define CPADD(register)                                 \
+		.cpadd	register
+#define CPLOAD(register)                                \
+		.cpload	register
+#else
+#define CPRESTORE(register)
+#define CPADD(register)
+#define CPLOAD(register)
+#endif
+
+/*
+ * LEAF - declare leaf routine
+ */
+#define	LEAF(symbol)                                    \
+		.globl	symbol;                         \
+		.align	2;                              \
+		.type	symbol, @function;              \
+		.ent	symbol, 0;                      \
+symbol:		.frame	sp, 0, ra
+
+/*
+ * NESTED - declare nested routine entry point
+ */
+#define	NESTED(symbol, framesize, rpc)                  \
+		.globl	symbol;                         \
+		.align	2;                              \
+		.type	symbol, @function;              \
+		.ent	symbol, 0;                       \
+symbol:		.frame	sp, framesize, rpc
+
+/*
+ * END - mark end of function
+ */
+#define	END(function)                                   \
+		.end	function;		        \
+		.size	function, .-function
+
+/*
+ * EXPORT - export definition of symbol
+ */
+#define EXPORT(symbol)					\
+		.globl	symbol;                         \
+symbol:
+
+/*
+ * FEXPORT - export definition of a function symbol
+ */
+#define FEXPORT(symbol)					\
+		.globl	symbol;				\
+		.type	symbol, @function;		\
+symbol:
+
+/*
+ * ABS - export absolute symbol
+ */
+#define	ABS(symbol,value)                               \
+		.globl	symbol;                         \
+symbol		=	value
+
+#define	PANIC(msg)                                      \
+		.set	push;				\
+		.set	reorder;                        \
+		PTR_LA	a0, 8f;                          \
+		jal	panic;                          \
+9:		b	9b;                             \
+		.set	pop;				\
+		TEXT(msg)
+
+/*
+ * Print formatted string
+ */
+#ifdef CONFIG_PRINTK
+#define PRINT(string)                                   \
+		.set	push;				\
+		.set	reorder;                        \
+		PTR_LA	a0, 8f;                          \
+		jal	printk;                         \
+		.set	pop;				\
+		TEXT(string)
+#else
+#define PRINT(string)
+#endif
+
+#define	TEXT(msg)                                       \
+		.pushsection .data;			\
+8:		.asciiz	msg;                            \
+		.popsection;
+
+/*
+ * Build text tables
+ */
+#define TTABLE(string)                                  \
+		.pushsection .text;			\
+		.word	1f;                             \
+		.popsection				\
+		.pushsection .data;			\
+1:		.asciiz	string;                         \
+		.popsection
+
+/*
+ * MIPS IV pref instruction.
+ * Use with .set noreorder only!
+ *
+ * MIPS IV implementations are free to treat this as a nop.  The R5000
+ * is one of them.  So we should have an option not to use this instruction.
+ */
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define PREF(hint,addr)                                 \
+		.set	push;				\
+		.set	mips4;				\
+		pref	hint, addr;			\
+		.set	pop
+
+#define PREFX(hint,addr)                                \
+		.set	push;				\
+		.set	mips4;				\
+		prefx	hint, addr;			\
+		.set	pop
+
+#else /* !CONFIG_CPU_HAS_PREFETCH */
+
+#define PREF(hint, addr)
+#define PREFX(hint, addr)
+
+#endif /* !CONFIG_CPU_HAS_PREFETCH */
+
+/*
+ * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
+ */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
+#define MOVN(rd, rs, rt)                                \
+		.set	push;				\
+		.set	reorder;			\
+		beqz	rt, 9f;                         \
+		move	rd, rs;                         \
+		.set	pop;				\
+9:
+#define MOVZ(rd, rs, rt)                                \
+		.set	push;				\
+		.set	reorder;			\
+		bnez	rt, 9f;                         \
+		move	rd, rs;                         \
+		.set	pop;				\
+9:
+#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
+#define MOVN(rd, rs, rt)                                \
+		.set	push;				\
+		.set	noreorder;			\
+		bnezl	rt, 9f;                         \
+		 move	rd, rs;                         \
+		.set	pop;				\
+9:
+#define MOVZ(rd, rs, rt)                                \
+		.set	push;				\
+		.set	noreorder;			\
+		beqzl	rt, 9f;                         \
+		 move	rd, rs;                         \
+		.set	pop;				\
+9:
+#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
+    (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
+#define MOVN(rd, rs, rt)                                \
+		movn	rd, rs, rt
+#define MOVZ(rd, rs, rt)                                \
+		movz	rd, rs, rt
+#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
+
+/*
+ * Stack alignment
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define ALSZ	7
+#define ALMASK	~7
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define ALSZ	15
+#define ALMASK	~15
+#endif
+
+/*
+ * Macros to handle different pointer/register sizes for 32/64-bit code
+ */
+
+/*
+ * Size of a register
+ */
+#ifdef __mips64
+#define SZREG	8
+#else
+#define SZREG	4
+#endif
+
+/*
+ * Use the following macros in assemblercode to load/store registers,
+ * pointers etc.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define REG_S		sw
+#define REG_L		lw
+#define REG_SUBU	subu
+#define REG_ADDU	addu
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define REG_S		sd
+#define REG_L		ld
+#define REG_SUBU	dsubu
+#define REG_ADDU	daddu
+#endif
+
+/*
+ * How to add/sub/load/store/shift C int variables.
+ */
+#if (_MIPS_SZINT == 32)
+#define INT_ADD		add
+#define INT_ADDU	addu
+#define INT_ADDI	addi
+#define INT_ADDIU	addiu
+#define INT_SUB		sub
+#define INT_SUBU	subu
+#define INT_L		lw
+#define INT_S		sw
+#define INT_SLL		sll
+#define INT_SLLV	sllv
+#define INT_SRL		srl
+#define INT_SRLV	srlv
+#define INT_SRA		sra
+#define INT_SRAV	srav
+#endif
+
+#if (_MIPS_SZINT == 64)
+#define INT_ADD		dadd
+#define INT_ADDU	daddu
+#define INT_ADDI	daddi
+#define INT_ADDIU	daddiu
+#define INT_SUB		dsub
+#define INT_SUBU	dsubu
+#define INT_L		ld
+#define INT_S		sd
+#define INT_SLL		dsll
+#define INT_SLLV	dsllv
+#define INT_SRL		dsrl
+#define INT_SRLV	dsrlv
+#define INT_SRA		dsra
+#define INT_SRAV	dsrav
+#endif
+
+/*
+ * How to add/sub/load/store/shift C long variables.
+ */
+#if (_MIPS_SZLONG == 32)
+#define LONG_ADD	add
+#define LONG_ADDU	addu
+#define LONG_ADDI	addi
+#define LONG_ADDIU	addiu
+#define LONG_SUB	sub
+#define LONG_SUBU	subu
+#define LONG_L		lw
+#define LONG_S		sw
+#define LONG_SLL	sll
+#define LONG_SLLV	sllv
+#define LONG_SRL	srl
+#define LONG_SRLV	srlv
+#define LONG_SRA	sra
+#define LONG_SRAV	srav
+
+#define LONG		.word
+#define LONGSIZE	4
+#define LONGMASK	3
+#define LONGLOG		2
+#endif
+
+#if (_MIPS_SZLONG == 64)
+#define LONG_ADD	dadd
+#define LONG_ADDU	daddu
+#define LONG_ADDI	daddi
+#define LONG_ADDIU	daddiu
+#define LONG_SUB	dsub
+#define LONG_SUBU	dsubu
+#define LONG_L		ld
+#define LONG_S		sd
+#define LONG_SLL	dsll
+#define LONG_SLLV	dsllv
+#define LONG_SRL	dsrl
+#define LONG_SRLV	dsrlv
+#define LONG_SRA	dsra
+#define LONG_SRAV	dsrav
+
+#define LONG		.dword
+#define LONGSIZE	8
+#define LONGMASK	7
+#define LONGLOG		3
+#endif
+
+/*
+ * How to add/sub/load/store/shift pointers.
+ */
+#if (_MIPS_SZPTR == 32)
+#define PTR_ADD		add
+#define PTR_ADDU	addu
+#define PTR_ADDI	addi
+#define PTR_ADDIU	addiu
+#define PTR_SUB		sub
+#define PTR_SUBU	subu
+#define PTR_L		lw
+#define PTR_S		sw
+#define PTR_LA		la
+#define PTR_LI		li
+#define PTR_SLL		sll
+#define PTR_SLLV	sllv
+#define PTR_SRL		srl
+#define PTR_SRLV	srlv
+#define PTR_SRA		sra
+#define PTR_SRAV	srav
+
+#define PTR_SCALESHIFT	2
+
+#define PTR		.word
+#define PTRSIZE		4
+#define PTRLOG		2
+#endif
+
+#if (_MIPS_SZPTR == 64)
+#define PTR_ADD		dadd
+#define PTR_ADDU	daddu
+#define PTR_ADDI	daddi
+#define PTR_ADDIU	daddiu
+#define PTR_SUB		dsub
+#define PTR_SUBU	dsubu
+#define PTR_L		ld
+#define PTR_S		sd
+#define PTR_LA		dla
+#define PTR_LI		dli
+#define PTR_SLL		dsll
+#define PTR_SLLV	dsllv
+#define PTR_SRL		dsrl
+#define PTR_SRLV	dsrlv
+#define PTR_SRA		dsra
+#define PTR_SRAV	dsrav
+
+#define PTR_SCALESHIFT	3
+
+#define PTR		.dword
+#define PTRSIZE		8
+#define PTRLOG		3
+#endif
+
+/*
+ * Some cp0 registers were extended to 64bit for MIPS III.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define MFC0		mfc0
+#define MTC0		mtc0
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define MFC0		dmfc0
+#define MTC0		dmtc0
+#endif
+
+#define SSNOP		sll zero, zero, 1
+
+#ifdef CONFIG_SGI_IP28
+/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
+#include <asm/cacheops.h>
+#define R10KCBARRIER(addr)  cache   Cache_Barrier, addr;
+#else
+#define R10KCBARRIER(addr)
+#endif
+
+#endif /* __ASM_ASM_H */
diff --git a/arch/mips/include/asm/asmmacro-32.h b/arch/mips/include/asm/asmmacro-32.h
new file mode 100644
index 0000000..5de3963
--- /dev/null
+++ b/arch/mips/include/asm/asmmacro-32.h
@@ -0,0 +1,158 @@
+/*
+ * asmmacro.h: Assembler macros to make things easier to read.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1998, 1999, 2003 Ralf Baechle
+ */
+#ifndef _ASM_ASMMACRO_32_H
+#define _ASM_ASMMACRO_32_H
+
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+
+	.macro	fpu_save_double thread status tmp1=t0
+	cfc1	\tmp1,  fcr31
+	sdc1	$f0,  THREAD_FPR0(\thread)
+	sdc1	$f2,  THREAD_FPR2(\thread)
+	sdc1	$f4,  THREAD_FPR4(\thread)
+	sdc1	$f6,  THREAD_FPR6(\thread)
+	sdc1	$f8,  THREAD_FPR8(\thread)
+	sdc1	$f10, THREAD_FPR10(\thread)
+	sdc1	$f12, THREAD_FPR12(\thread)
+	sdc1	$f14, THREAD_FPR14(\thread)
+	sdc1	$f16, THREAD_FPR16(\thread)
+	sdc1	$f18, THREAD_FPR18(\thread)
+	sdc1	$f20, THREAD_FPR20(\thread)
+	sdc1	$f22, THREAD_FPR22(\thread)
+	sdc1	$f24, THREAD_FPR24(\thread)
+	sdc1	$f26, THREAD_FPR26(\thread)
+	sdc1	$f28, THREAD_FPR28(\thread)
+	sdc1	$f30, THREAD_FPR30(\thread)
+	sw	\tmp1, THREAD_FCR31(\thread)
+	.endm
+
+	.macro	fpu_save_single thread tmp=t0
+	cfc1	\tmp,  fcr31
+	swc1	$f0,  THREAD_FPR0(\thread)
+	swc1	$f1,  THREAD_FPR1(\thread)
+	swc1	$f2,  THREAD_FPR2(\thread)
+	swc1	$f3,  THREAD_FPR3(\thread)
+	swc1	$f4,  THREAD_FPR4(\thread)
+	swc1	$f5,  THREAD_FPR5(\thread)
+	swc1	$f6,  THREAD_FPR6(\thread)
+	swc1	$f7,  THREAD_FPR7(\thread)
+	swc1	$f8,  THREAD_FPR8(\thread)
+	swc1	$f9,  THREAD_FPR9(\thread)
+	swc1	$f10, THREAD_FPR10(\thread)
+	swc1	$f11, THREAD_FPR11(\thread)
+	swc1	$f12, THREAD_FPR12(\thread)
+	swc1	$f13, THREAD_FPR13(\thread)
+	swc1	$f14, THREAD_FPR14(\thread)
+	swc1	$f15, THREAD_FPR15(\thread)
+	swc1	$f16, THREAD_FPR16(\thread)
+	swc1	$f17, THREAD_FPR17(\thread)
+	swc1	$f18, THREAD_FPR18(\thread)
+	swc1	$f19, THREAD_FPR19(\thread)
+	swc1	$f20, THREAD_FPR20(\thread)
+	swc1	$f21, THREAD_FPR21(\thread)
+	swc1	$f22, THREAD_FPR22(\thread)
+	swc1	$f23, THREAD_FPR23(\thread)
+	swc1	$f24, THREAD_FPR24(\thread)
+	swc1	$f25, THREAD_FPR25(\thread)
+	swc1	$f26, THREAD_FPR26(\thread)
+	swc1	$f27, THREAD_FPR27(\thread)
+	swc1	$f28, THREAD_FPR28(\thread)
+	swc1	$f29, THREAD_FPR29(\thread)
+	swc1	$f30, THREAD_FPR30(\thread)
+	swc1	$f31, THREAD_FPR31(\thread)
+	sw	\tmp, THREAD_FCR31(\thread)
+	.endm
+
+	.macro	fpu_restore_double thread status tmp=t0
+	lw	\tmp, THREAD_FCR31(\thread)
+	ldc1	$f0,  THREAD_FPR0(\thread)
+	ldc1	$f2,  THREAD_FPR2(\thread)
+	ldc1	$f4,  THREAD_FPR4(\thread)
+	ldc1	$f6,  THREAD_FPR6(\thread)
+	ldc1	$f8,  THREAD_FPR8(\thread)
+	ldc1	$f10, THREAD_FPR10(\thread)
+	ldc1	$f12, THREAD_FPR12(\thread)
+	ldc1	$f14, THREAD_FPR14(\thread)
+	ldc1	$f16, THREAD_FPR16(\thread)
+	ldc1	$f18, THREAD_FPR18(\thread)
+	ldc1	$f20, THREAD_FPR20(\thread)
+	ldc1	$f22, THREAD_FPR22(\thread)
+	ldc1	$f24, THREAD_FPR24(\thread)
+	ldc1	$f26, THREAD_FPR26(\thread)
+	ldc1	$f28, THREAD_FPR28(\thread)
+	ldc1	$f30, THREAD_FPR30(\thread)
+	ctc1	\tmp, fcr31
+	.endm
+
+	.macro	fpu_restore_single thread tmp=t0
+	lw	\tmp, THREAD_FCR31(\thread)
+	lwc1	$f0,  THREAD_FPR0(\thread)
+	lwc1	$f1,  THREAD_FPR1(\thread)
+	lwc1	$f2,  THREAD_FPR2(\thread)
+	lwc1	$f3,  THREAD_FPR3(\thread)
+	lwc1	$f4,  THREAD_FPR4(\thread)
+	lwc1	$f5,  THREAD_FPR5(\thread)
+	lwc1	$f6,  THREAD_FPR6(\thread)
+	lwc1	$f7,  THREAD_FPR7(\thread)
+	lwc1	$f8,  THREAD_FPR8(\thread)
+	lwc1	$f9,  THREAD_FPR9(\thread)
+	lwc1	$f10, THREAD_FPR10(\thread)
+	lwc1	$f11, THREAD_FPR11(\thread)
+	lwc1	$f12, THREAD_FPR12(\thread)
+	lwc1	$f13, THREAD_FPR13(\thread)
+	lwc1	$f14, THREAD_FPR14(\thread)
+	lwc1	$f15, THREAD_FPR15(\thread)
+	lwc1	$f16, THREAD_FPR16(\thread)
+	lwc1	$f17, THREAD_FPR17(\thread)
+	lwc1	$f18, THREAD_FPR18(\thread)
+	lwc1	$f19, THREAD_FPR19(\thread)
+	lwc1	$f20, THREAD_FPR20(\thread)
+	lwc1	$f21, THREAD_FPR21(\thread)
+	lwc1	$f22, THREAD_FPR22(\thread)
+	lwc1	$f23, THREAD_FPR23(\thread)
+	lwc1	$f24, THREAD_FPR24(\thread)
+	lwc1	$f25, THREAD_FPR25(\thread)
+	lwc1	$f26, THREAD_FPR26(\thread)
+	lwc1	$f27, THREAD_FPR27(\thread)
+	lwc1	$f28, THREAD_FPR28(\thread)
+	lwc1	$f29, THREAD_FPR29(\thread)
+	lwc1	$f30, THREAD_FPR30(\thread)
+	lwc1	$f31, THREAD_FPR31(\thread)
+	ctc1	\tmp, fcr31
+	.endm
+
+	.macro	cpu_save_nonscratch thread
+	LONG_S	s0, THREAD_REG16(\thread)
+	LONG_S	s1, THREAD_REG17(\thread)
+	LONG_S	s2, THREAD_REG18(\thread)
+	LONG_S	s3, THREAD_REG19(\thread)
+	LONG_S	s4, THREAD_REG20(\thread)
+	LONG_S	s5, THREAD_REG21(\thread)
+	LONG_S	s6, THREAD_REG22(\thread)
+	LONG_S	s7, THREAD_REG23(\thread)
+	LONG_S	sp, THREAD_REG29(\thread)
+	LONG_S	fp, THREAD_REG30(\thread)
+	.endm
+
+	.macro	cpu_restore_nonscratch thread
+	LONG_L	s0, THREAD_REG16(\thread)
+	LONG_L	s1, THREAD_REG17(\thread)
+	LONG_L	s2, THREAD_REG18(\thread)
+	LONG_L	s3, THREAD_REG19(\thread)
+	LONG_L	s4, THREAD_REG20(\thread)
+	LONG_L	s5, THREAD_REG21(\thread)
+	LONG_L	s6, THREAD_REG22(\thread)
+	LONG_L	s7, THREAD_REG23(\thread)
+	LONG_L	sp, THREAD_REG29(\thread)
+	LONG_L	fp, THREAD_REG30(\thread)
+	LONG_L	ra, THREAD_REG31(\thread)
+	.endm
+
+#endif /* _ASM_ASMMACRO_32_H */
diff --git a/arch/mips/include/asm/asmmacro-64.h b/arch/mips/include/asm/asmmacro-64.h
new file mode 100644
index 0000000..225feef
--- /dev/null
+++ b/arch/mips/include/asm/asmmacro-64.h
@@ -0,0 +1,139 @@
+/*
+ * asmmacro.h: Assembler macros to make things easier to read.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1998, 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ASMMACRO_64_H
+#define _ASM_ASMMACRO_64_H
+
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+
+	.macro	fpu_save_16even thread tmp=t0
+	cfc1	\tmp, fcr31
+	sdc1	$f0,  THREAD_FPR0(\thread)
+	sdc1	$f2,  THREAD_FPR2(\thread)
+	sdc1	$f4,  THREAD_FPR4(\thread)
+	sdc1	$f6,  THREAD_FPR6(\thread)
+	sdc1	$f8,  THREAD_FPR8(\thread)
+	sdc1	$f10, THREAD_FPR10(\thread)
+	sdc1	$f12, THREAD_FPR12(\thread)
+	sdc1	$f14, THREAD_FPR14(\thread)
+	sdc1	$f16, THREAD_FPR16(\thread)
+	sdc1	$f18, THREAD_FPR18(\thread)
+	sdc1	$f20, THREAD_FPR20(\thread)
+	sdc1	$f22, THREAD_FPR22(\thread)
+	sdc1	$f24, THREAD_FPR24(\thread)
+	sdc1	$f26, THREAD_FPR26(\thread)
+	sdc1	$f28, THREAD_FPR28(\thread)
+	sdc1	$f30, THREAD_FPR30(\thread)
+	sw	\tmp, THREAD_FCR31(\thread)
+	.endm
+
+	.macro	fpu_save_16odd thread
+	sdc1	$f1,  THREAD_FPR1(\thread)
+	sdc1	$f3,  THREAD_FPR3(\thread)
+	sdc1	$f5,  THREAD_FPR5(\thread)
+	sdc1	$f7,  THREAD_FPR7(\thread)
+	sdc1	$f9,  THREAD_FPR9(\thread)
+	sdc1	$f11, THREAD_FPR11(\thread)
+	sdc1	$f13, THREAD_FPR13(\thread)
+	sdc1	$f15, THREAD_FPR15(\thread)
+	sdc1	$f17, THREAD_FPR17(\thread)
+	sdc1	$f19, THREAD_FPR19(\thread)
+	sdc1	$f21, THREAD_FPR21(\thread)
+	sdc1	$f23, THREAD_FPR23(\thread)
+	sdc1	$f25, THREAD_FPR25(\thread)
+	sdc1	$f27, THREAD_FPR27(\thread)
+	sdc1	$f29, THREAD_FPR29(\thread)
+	sdc1	$f31, THREAD_FPR31(\thread)
+	.endm
+
+	.macro	fpu_save_double thread status tmp
+	sll	\tmp, \status, 5
+	bgez	\tmp, 2f
+	fpu_save_16odd \thread
+2:
+	fpu_save_16even \thread \tmp
+	.endm
+
+	.macro	fpu_restore_16even thread tmp=t0
+	lw	\tmp, THREAD_FCR31(\thread)
+	ldc1	$f0,  THREAD_FPR0(\thread)
+	ldc1	$f2,  THREAD_FPR2(\thread)
+	ldc1	$f4,  THREAD_FPR4(\thread)
+	ldc1	$f6,  THREAD_FPR6(\thread)
+	ldc1	$f8,  THREAD_FPR8(\thread)
+	ldc1	$f10, THREAD_FPR10(\thread)
+	ldc1	$f12, THREAD_FPR12(\thread)
+	ldc1	$f14, THREAD_FPR14(\thread)
+	ldc1	$f16, THREAD_FPR16(\thread)
+	ldc1	$f18, THREAD_FPR18(\thread)
+	ldc1	$f20, THREAD_FPR20(\thread)
+	ldc1	$f22, THREAD_FPR22(\thread)
+	ldc1	$f24, THREAD_FPR24(\thread)
+	ldc1	$f26, THREAD_FPR26(\thread)
+	ldc1	$f28, THREAD_FPR28(\thread)
+	ldc1	$f30, THREAD_FPR30(\thread)
+	ctc1	\tmp, fcr31
+	.endm
+
+	.macro	fpu_restore_16odd thread
+	ldc1	$f1,  THREAD_FPR1(\thread)
+	ldc1	$f3,  THREAD_FPR3(\thread)
+	ldc1	$f5,  THREAD_FPR5(\thread)
+	ldc1	$f7,  THREAD_FPR7(\thread)
+	ldc1	$f9,  THREAD_FPR9(\thread)
+	ldc1	$f11, THREAD_FPR11(\thread)
+	ldc1	$f13, THREAD_FPR13(\thread)
+	ldc1	$f15, THREAD_FPR15(\thread)
+	ldc1	$f17, THREAD_FPR17(\thread)
+	ldc1	$f19, THREAD_FPR19(\thread)
+	ldc1	$f21, THREAD_FPR21(\thread)
+	ldc1	$f23, THREAD_FPR23(\thread)
+	ldc1	$f25, THREAD_FPR25(\thread)
+	ldc1	$f27, THREAD_FPR27(\thread)
+	ldc1	$f29, THREAD_FPR29(\thread)
+	ldc1	$f31, THREAD_FPR31(\thread)
+	.endm
+
+	.macro	fpu_restore_double thread status tmp
+	sll	\tmp, \status, 5
+	bgez	\tmp, 1f				# 16 register mode?
+
+	fpu_restore_16odd \thread
+1:	fpu_restore_16even \thread \tmp
+	.endm
+
+	.macro	cpu_save_nonscratch thread
+	LONG_S	s0, THREAD_REG16(\thread)
+	LONG_S	s1, THREAD_REG17(\thread)
+	LONG_S	s2, THREAD_REG18(\thread)
+	LONG_S	s3, THREAD_REG19(\thread)
+	LONG_S	s4, THREAD_REG20(\thread)
+	LONG_S	s5, THREAD_REG21(\thread)
+	LONG_S	s6, THREAD_REG22(\thread)
+	LONG_S	s7, THREAD_REG23(\thread)
+	LONG_S	sp, THREAD_REG29(\thread)
+	LONG_S	fp, THREAD_REG30(\thread)
+	.endm
+
+	.macro	cpu_restore_nonscratch thread
+	LONG_L	s0, THREAD_REG16(\thread)
+	LONG_L	s1, THREAD_REG17(\thread)
+	LONG_L	s2, THREAD_REG18(\thread)
+	LONG_L	s3, THREAD_REG19(\thread)
+	LONG_L	s4, THREAD_REG20(\thread)
+	LONG_L	s5, THREAD_REG21(\thread)
+	LONG_L	s6, THREAD_REG22(\thread)
+	LONG_L	s7, THREAD_REG23(\thread)
+	LONG_L	sp, THREAD_REG29(\thread)
+	LONG_L	fp, THREAD_REG30(\thread)
+	LONG_L	ra, THREAD_REG31(\thread)
+	.endm
+
+#endif /* _ASM_ASMMACRO_64_H */
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
new file mode 100644
index 0000000..7a88175
--- /dev/null
+++ b/arch/mips/include/asm/asmmacro.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef _ASM_ASMMACRO_H
+#define _ASM_ASMMACRO_H
+
+#include <asm/hazards.h>
+
+#ifdef CONFIG_32BIT
+#include <asm/asmmacro-32.h>
+#endif
+#ifdef CONFIG_64BIT
+#include <asm/asmmacro-64.h>
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	.macro	local_irq_enable reg=t0
+	mfc0	\reg, CP0_TCSTATUS
+	ori	\reg, \reg, TCSTATUS_IXMT
+	xori	\reg, \reg, TCSTATUS_IXMT
+	mtc0	\reg, CP0_TCSTATUS
+	_ehb
+	.endm
+
+	.macro	local_irq_disable reg=t0
+	mfc0	\reg, CP0_TCSTATUS
+	ori	\reg, \reg, TCSTATUS_IXMT
+	mtc0	\reg, CP0_TCSTATUS
+	_ehb
+	.endm
+#else
+	.macro	local_irq_enable reg=t0
+	mfc0	\reg, CP0_STATUS
+	ori	\reg, \reg, 1
+	mtc0	\reg, CP0_STATUS
+	irq_enable_hazard
+	.endm
+
+	.macro	local_irq_disable reg=t0
+	mfc0	\reg, CP0_STATUS
+	ori	\reg, \reg, 1
+	xori	\reg, \reg, 1
+	mtc0	\reg, CP0_STATUS
+	irq_disable_hazard
+	.endm
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/*
+ * Temporary until all gas have MT ASE support
+ */
+	.macro	DMT	reg=0
+	.word	0x41600bc1 | (\reg << 16)
+	.endm
+
+	.macro	EMT	reg=0
+	.word	0x41600be1 | (\reg << 16)
+	.endm
+
+	.macro	DVPE	reg=0
+	.word	0x41600001 | (\reg << 16)
+	.endm
+
+	.macro	EVPE	reg=0
+	.word	0x41600021 | (\reg << 16)
+	.endm
+
+	.macro	MFTR	rt=0, rd=0, u=0, sel=0
+	 .word	0x41000000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
+	.endm
+
+	.macro	MTTR	rt=0, rd=0, u=0, sel=0
+	 .word	0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
+	.endm
+
+#endif /* _ASM_ASMMACRO_H */
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
new file mode 100644
index 0000000..1232be3
--- /dev/null
+++ b/arch/mips/include/asm/atomic.h
@@ -0,0 +1,801 @@
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * But use these as seldom as possible since they are much more slower
+ * than regular operations.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 99, 2000, 03, 04, 06 by Ralf Baechle
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#include <linux/irqflags.h>
+#include <asm/barrier.h>
+#include <asm/cpu-features.h>
+#include <asm/war.h>
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)    { (i) }
+
+/*
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v)		((v)->counter)
+
+/*
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v, i)		((v)->counter = (i))
+
+/*
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %1		# atomic_add		\n"
+		"	addu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %1		# atomic_add		\n"
+		"	addu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		v->counter += i;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic_sub(int i, atomic_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %1		# atomic_sub		\n"
+		"	subu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %1		# atomic_sub		\n"
+		"	subu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		v->counter -= i;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqz	%0, 2f					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result += i;
+		v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+static __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqz	%0, 2f					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result -= i;
+		v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+/*
+ * atomic_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
+ */
+static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_sub_if_positive\n"
+		"	subu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	sc	%0, %2					\n"
+		"	.set	noreorder				\n"
+		"	beqzl	%0, 1b					\n"
+		"	 subu	%0, %1, %3				\n"
+		"	.set	reorder					\n"
+		"1:							\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_sub_if_positive\n"
+		"	subu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	sc	%0, %2					\n"
+		"	.set	noreorder				\n"
+		"	beqz	%0, 2f					\n"
+		"	 subu	%0, %1, %3				\n"
+		"	.set	reorder					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"1:							\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result -= i;
+		if (result >= 0)
+			v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+/*
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+/*
+ * atomic_dec_and_test - decrement by 1 and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+/*
+ * atomic_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ */
+#define atomic_dec_if_positive(v)	atomic_sub_if_positive(1, v)
+
+/*
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc(v) atomic_add(1, (v))
+
+/*
+ * atomic_dec - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec(v) atomic_sub(1, (v))
+
+/*
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic_add_negative(i, v) (atomic_add_return(i, (v)) < 0)
+
+#ifdef CONFIG_64BIT
+
+typedef struct { volatile long counter; } atomic64_t;
+
+#define ATOMIC64_INIT(i)    { (i) }
+
+/*
+ * atomic64_read - read atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ */
+#define atomic64_read(v)	((v)->counter)
+
+/*
+ * atomic64_set - set atomic variable
+ * @v: pointer of type atomic64_t
+ * @i: required value
+ */
+#define atomic64_set(v, i)	((v)->counter = (i))
+
+/*
+ * atomic64_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic64_add(long i, atomic64_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %1		# atomic64_add		\n"
+		"	addu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %1		# atomic64_add		\n"
+		"	addu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		v->counter += i;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * atomic64_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic64_sub(long i, atomic64_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %1		# atomic64_sub		\n"
+		"	subu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %1		# atomic64_sub		\n"
+		"	subu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		v->counter -= i;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ long atomic64_add_return(long i, atomic64_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqz	%0, 2f					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result += i;
+		v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqz	%0, 2f					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result -= i;
+		v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+/*
+ * atomic64_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
+ */
+static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_sub_if_positive\n"
+		"	dsubu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	scd	%0, %2					\n"
+		"	.set	noreorder				\n"
+		"	beqzl	%0, 1b					\n"
+		"	 dsubu	%0, %1, %3				\n"
+		"	.set	reorder					\n"
+		"1:							\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_sub_if_positive\n"
+		"	dsubu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	scd	%0, %2					\n"
+		"	.set	noreorder				\n"
+		"	beqz	%0, 2f					\n"
+		"	 dsubu	%0, %1, %3				\n"
+		"	.set	reorder					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"1:							\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result -= i;
+		if (result >= 0)
+			v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+#define atomic64_cmpxchg(v, o, n) \
+	((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#define atomic64_dec_return(v) atomic64_sub_return(1, (v))
+#define atomic64_inc_return(v) atomic64_add_return(1, (v))
+
+/*
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_sub_and_test(i, v) (atomic64_sub_return((i), (v)) == 0)
+
+/*
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+/*
+ * atomic64_dec_and_test - decrement by 1 and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0)
+
+/*
+ * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic64_t
+ */
+#define atomic64_dec_if_positive(v)	atomic64_sub_if_positive(1, v)
+
+/*
+ * atomic64_inc - increment atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic64_inc(v) atomic64_add(1, (v))
+
+/*
+ * atomic64_dec - decrement and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic64_dec(v) atomic64_sub(1, (v))
+
+/*
+ * atomic64_add_negative - add and test if negative
+ * @v: pointer of type atomic64_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0)
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * atomic*_return operations are serializing but not the non-*_return
+ * versions.
+ */
+#define smp_mb__before_atomic_dec()	smp_llsc_mb()
+#define smp_mb__after_atomic_dec()	smp_llsc_mb()
+#define smp_mb__before_atomic_inc()	smp_llsc_mb()
+#define smp_mb__after_atomic_inc()	smp_llsc_mb()
+
+#include <asm-generic/atomic.h>
+
+#endif /* _ASM_ATOMIC_H */
diff --git a/arch/mips/include/asm/auxvec.h b/arch/mips/include/asm/auxvec.h
new file mode 100644
index 0000000..7cf7f2d
--- /dev/null
+++ b/arch/mips/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif /* _ASM_AUXVEC_H */
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
new file mode 100644
index 0000000..8e9ac31
--- /dev/null
+++ b/arch/mips/include/asm/barrier.h
@@ -0,0 +1,155 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+/*
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ */
+
+#define read_barrier_depends()		do { } while(0)
+#define smp_read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_CPU_HAS_SYNC
+#define __sync()				\
+	__asm__ __volatile__(			\
+		".set	push\n\t"		\
+		".set	noreorder\n\t"		\
+		".set	mips2\n\t"		\
+		"sync\n\t"			\
+		".set	pop"			\
+		: /* no output */		\
+		: /* no input */		\
+		: "memory")
+#else
+#define __sync()	do { } while(0)
+#endif
+
+#define __fast_iob()				\
+	__asm__ __volatile__(			\
+		".set	push\n\t"		\
+		".set	noreorder\n\t"		\
+		"lw	$0,%0\n\t"		\
+		"nop\n\t"			\
+		".set	pop"			\
+		: /* no output */		\
+		: "m" (*(int *)CKSEG1)		\
+		: "memory")
+
+#define fast_wmb()	__sync()
+#define fast_rmb()	__sync()
+#define fast_mb()	__sync()
+#ifdef CONFIG_SGI_IP28
+#define fast_iob()				\
+	__asm__ __volatile__(			\
+		".set	push\n\t"		\
+		".set	noreorder\n\t"		\
+		"lw	$0,%0\n\t"		\
+		"sync\n\t"			\
+		"lw	$0,%0\n\t"		\
+		".set	pop"			\
+		: /* no output */		\
+		: "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \
+		: "memory")
+#else
+#define fast_iob()				\
+	do {					\
+		__sync();			\
+		__fast_iob();			\
+	} while (0)
+#endif
+
+#ifdef CONFIG_CPU_HAS_WB
+
+#include <asm/wbflush.h>
+
+#define wmb()		fast_wmb()
+#define rmb()		fast_rmb()
+#define mb()		wbflush()
+#define iob()		wbflush()
+
+#else /* !CONFIG_CPU_HAS_WB */
+
+#define wmb()		fast_wmb()
+#define rmb()		fast_rmb()
+#define mb()		fast_mb()
+#define iob()		fast_iob()
+
+#endif /* !CONFIG_CPU_HAS_WB */
+
+#if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP)
+#define __WEAK_ORDERING_MB	"       sync	\n"
+#else
+#define __WEAK_ORDERING_MB	"		\n"
+#endif
+#if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
+#define __WEAK_LLSC_MB		"       sync	\n"
+#else
+#define __WEAK_LLSC_MB		"		\n"
+#endif
+
+#define smp_mb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
+#define smp_rmb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
+#define smp_wmb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
+
+#define set_mb(var, value) \
+	do { var = value; smp_mb(); } while (0)
+
+#define smp_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#define smp_llsc_rmb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#define smp_llsc_wmb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+
+#endif /* __ASM_BARRIER_H */
diff --git a/arch/mips/include/asm/bcache.h b/arch/mips/include/asm/bcache.h
new file mode 100644
index 0000000..0ba9d6e
--- /dev/null
+++ b/arch/mips/include/asm/bcache.h
@@ -0,0 +1,60 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1997, 1999 by Ralf Baechle
+ * Copyright (c) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_BCACHE_H
+#define _ASM_BCACHE_H
+
+
+/* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent,
+   chipset implemented caches.  On machines with other CPUs the CPU does the
+   cache thing itself. */
+struct bcache_ops {
+	void (*bc_enable)(void);
+	void (*bc_disable)(void);
+	void (*bc_wback_inv)(unsigned long page, unsigned long size);
+	void (*bc_inv)(unsigned long page, unsigned long size);
+};
+
+extern void indy_sc_init(void);
+
+#ifdef CONFIG_BOARD_SCACHE
+
+extern struct bcache_ops *bcops;
+
+static inline void bc_enable(void)
+{
+	bcops->bc_enable();
+}
+
+static inline void bc_disable(void)
+{
+	bcops->bc_disable();
+}
+
+static inline void bc_wback_inv(unsigned long page, unsigned long size)
+{
+	bcops->bc_wback_inv(page, size);
+}
+
+static inline void bc_inv(unsigned long page, unsigned long size)
+{
+	bcops->bc_inv(page, size);
+}
+
+#else /* !defined(CONFIG_BOARD_SCACHE) */
+
+/* Not R4000 / R4400 / R4600 / R5000.  */
+
+#define bc_enable() do { } while (0)
+#define bc_disable() do { } while (0)
+#define bc_wback_inv(page, size) do { } while (0)
+#define bc_inv(page, size) do { } while (0)
+
+#endif /* !defined(CONFIG_BOARD_SCACHE) */
+
+#endif /* _ASM_BCACHE_H */
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
new file mode 100644
index 0000000..49df8c4
--- /dev/null
+++ b/arch/mips/include/asm/bitops.h
@@ -0,0 +1,672 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994 - 1997, 99, 2000, 06, 07  Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (c) 1999, 2000  Silicon Graphics, Inc.
+ */
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <linux/irqflags.h>
+#include <linux/types.h>
+#include <asm/barrier.h>
+#include <asm/bug.h>
+#include <asm/byteorder.h>		/* sigh ... */
+#include <asm/cpu-features.h>
+#include <asm/sgidefs.h>
+#include <asm/war.h>
+
+#if _MIPS_SZLONG == 32
+#define SZLONG_LOG 5
+#define SZLONG_MASK 31UL
+#define __LL		"ll	"
+#define __SC		"sc	"
+#define __INS		"ins    "
+#define __EXT		"ext    "
+#elif _MIPS_SZLONG == 64
+#define SZLONG_LOG 6
+#define SZLONG_MASK 63UL
+#define __LL		"lld	"
+#define __SC		"scd	"
+#define __INS		"dins    "
+#define __EXT		"dext    "
+#endif
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	smp_llsc_mb()
+#define smp_mb__after_clear_bit()	smp_llsc_mb()
+
+/*
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long temp;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1			# set_bit	\n"
+		"	or	%0, %2					\n"
+		"	" __SC	"%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << bit), "m" (*m));
+#ifdef CONFIG_CPU_MIPSR2
+	} else if (__builtin_constant_p(bit)) {
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1			# set_bit	\n"
+		"	" __INS "%0, %4, %2, 1				\n"
+		"	" __SC "%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (bit), "m" (*m), "r" (~0));
+#endif /* CONFIG_CPU_MIPSR2 */
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1			# set_bit	\n"
+		"	or	%0, %2					\n"
+		"	" __SC	"%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << bit), "m" (*m));
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		*a |= mask;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long temp;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1			# clear_bit	\n"
+		"	and	%0, %2					\n"
+		"	" __SC "%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (~(1UL << bit)), "m" (*m));
+#ifdef CONFIG_CPU_MIPSR2
+	} else if (__builtin_constant_p(bit)) {
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1			# clear_bit	\n"
+		"	" __INS "%0, $0, %2, 1				\n"
+		"	" __SC "%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (bit), "m" (*m));
+#endif /* CONFIG_CPU_MIPSR2 */
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1			# clear_bit	\n"
+		"	and	%0, %2					\n"
+		"	" __SC "%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (~(1UL << bit)), "m" (*m));
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		*a &= ~mask;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock.
+ */
+static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+	smp_mb__before_clear_bit();
+	clear_bit(nr, addr);
+}
+
+/*
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned short bit = nr & SZLONG_MASK;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3				\n"
+		"1:	" __LL "%0, %1		# change_bit	\n"
+		"	xor	%0, %2				\n"
+		"	" __SC	"%0, %1				\n"
+		"	beqzl	%0, 1b				\n"
+		"	.set	mips0				\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << bit), "m" (*m));
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3				\n"
+		"1:	" __LL "%0, %1		# change_bit	\n"
+		"	xor	%0, %2				\n"
+		"	" __SC	"%0, %1				\n"
+		"	beqz	%0, 2f				\n"
+		"	.subsection 2				\n"
+		"2:	b	1b				\n"
+		"	.previous				\n"
+		"	.set	mips0				\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << bit), "m" (*m));
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		*a ^= mask;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long res;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	push					\n"
+		"	.set	noreorder				\n"
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	 and	%2, %0, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	pop					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		res = (mask & *a);
+		*a |= mask;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return res != 0;
+}
+
+/*
+ * test_and_set_bit_lock - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and implies acquire ordering semantics
+ * after the memory operation.
+ */
+static inline int test_and_set_bit_lock(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long res;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	push					\n"
+		"	.set	noreorder				\n"
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	 and	%2, %0, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	pop					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		res = (mask & *a);
+		*a |= mask;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return res != 0;
+}
+/*
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long res;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	xor	%2, %3					\n"
+		"	" __SC 	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+#ifdef CONFIG_CPU_MIPSR2
+	} else if (__builtin_constant_p(nr)) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
+		"	" __EXT "%2, %0, %3, 1				\n"
+		"	" __INS	"%0, $0, %3, 1				\n"
+		"	" __SC 	"%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "ir" (bit), "m" (*m)
+		: "memory");
+#endif
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	push					\n"
+		"	.set	noreorder				\n"
+		"	.set	mips3					\n"
+		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	xor	%2, %3					\n"
+		"	" __SC 	"%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	 and	%2, %0, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	pop					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		res = (mask & *a);
+		*a &= ~mask;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return res != 0;
+}
+
+/*
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long res;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL	"%0, %1		# test_and_change_bit	\n"
+		"	xor	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	push					\n"
+		"	.set	noreorder				\n"
+		"	.set	mips3					\n"
+		"1:	" __LL	"%0, %1		# test_and_change_bit	\n"
+		"	xor	%2, %0, %3				\n"
+		"	" __SC	"\t%2, %1				\n"
+		"	beqz	%2, 2f					\n"
+		"	 and	%2, %0, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	pop					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		res = (mask & *a);
+		*a ^= mask;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return res != 0;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/*
+ * __clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * __clear_bit() is non-atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock if no other CPUs can concurrently
+ * modify other bits in the word.
+ */
+static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+	smp_mb();
+	__clear_bit(nr, addr);
+}
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+
+/*
+ * Return the bit position (0..63) of the most significant 1 bit in a word
+ * Returns -1 if no 1 bit exists
+ */
+static inline unsigned long __fls(unsigned long x)
+{
+	int lz;
+
+	if (sizeof(x) == 4) {
+		__asm__(
+		"	.set	push					\n"
+		"	.set	mips32					\n"
+		"	clz	%0, %1					\n"
+		"	.set	pop					\n"
+		: "=r" (lz)
+		: "r" (x));
+
+		return 31 - lz;
+	}
+
+	BUG_ON(sizeof(x) != 8);
+
+	__asm__(
+	"	.set	push						\n"
+	"	.set	mips64						\n"
+	"	dclz	%0, %1						\n"
+	"	.set	pop						\n"
+	: "=r" (lz)
+	: "r" (x));
+
+	return 63 - lz;
+}
+
+/*
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Returns 0..SZLONG-1
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	return __fls(word & -word);
+}
+
+/*
+ * fls - find last bit set.
+ * @word: The word to search
+ *
+ * This is defined the same way as ffs.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+static inline int fls(int word)
+{
+	__asm__("clz %0, %1" : "=r" (word) : "r" (word));
+
+	return 32 - word;
+}
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64)
+static inline int fls64(__u64 word)
+{
+	__asm__("dclz %0, %1" : "=r" (word) : "r" (word));
+
+	return 64 - word;
+}
+#else
+#include <asm-generic/bitops/fls64.h>
+#endif
+
+/*
+ * ffs - find first bit set.
+ * @word: The word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int word)
+{
+	if (!word)
+		return 0;
+
+	return fls(word & -word);
+}
+
+#else
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BITOPS_H */
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
new file mode 100644
index 0000000..610fe3a
--- /dev/null
+++ b/arch/mips/include/asm/bootinfo.h
@@ -0,0 +1,110 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2003 by Ralf Baechle
+ * Copyright (C) 1995, 1996 Andreas Busse
+ * Copyright (C) 1995, 1996 Stoned Elipot
+ * Copyright (C) 1995, 1996 Paul M. Antoine.
+ */
+#ifndef _ASM_BOOTINFO_H
+#define _ASM_BOOTINFO_H
+
+#include <linux/types.h>
+#include <asm/setup.h>
+
+/*
+ * The MACH_ IDs are sort of equivalent to PCI product IDs.  As such the
+ * numbers do not necessarily reflect technical relations or similarities
+ * between systems.
+ */
+
+/*
+ * Valid machtype values for group unknown
+ */
+#define  MACH_UNKNOWN		0	/* whatever...			*/
+
+/*
+ * Valid machtype for group DEC
+ */
+#define  MACH_DSUNKNOWN		0
+#define  MACH_DS23100		1	/* DECstation 2100 or 3100	*/
+#define  MACH_DS5100		2	/* DECsystem 5100		*/
+#define  MACH_DS5000_200	3	/* DECstation 5000/200		*/
+#define  MACH_DS5000_1XX	4	/* DECstation 5000/120, 125, 133, 150 */
+#define  MACH_DS5000_XX		5	/* DECstation 5000/20, 25, 33, 50 */
+#define  MACH_DS5000_2X0	6	/* DECstation 5000/240, 260	*/
+#define  MACH_DS5400		7	/* DECsystem 5400		*/
+#define  MACH_DS5500		8	/* DECsystem 5500		*/
+#define  MACH_DS5800		9	/* DECsystem 5800		*/
+#define  MACH_DS5900		10	/* DECsystem 5900		*/
+
+/*
+ * Valid machtype for group PMC-MSP
+ */
+#define MACH_MSP4200_EVAL       0	/* PMC-Sierra MSP4200 Evaluation */
+#define MACH_MSP4200_GW         1	/* PMC-Sierra MSP4200 Gateway demo */
+#define MACH_MSP4200_FPGA       2	/* PMC-Sierra MSP4200 Emulation */
+#define MACH_MSP7120_EVAL       3	/* PMC-Sierra MSP7120 Evaluation */
+#define MACH_MSP7120_GW         4	/* PMC-Sierra MSP7120 Residential GW */
+#define MACH_MSP7120_FPGA       5	/* PMC-Sierra MSP7120 Emulation */
+#define MACH_MSP_OTHER        255	/* PMC-Sierra unknown board type */
+
+/*
+ * Valid machtype for group Mikrotik
+ */
+#define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
+#define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
+
+#define CL_SIZE			COMMAND_LINE_SIZE
+
+extern char *system_type;
+const char *get_system_type(void);
+
+extern unsigned long mips_machtype;
+
+#define BOOT_MEM_MAP_MAX	32
+#define BOOT_MEM_RAM		1
+#define BOOT_MEM_ROM_DATA	2
+#define BOOT_MEM_RESERVED	3
+
+/*
+ * A memory map that's built upon what was determined
+ * or specified on the command line.
+ */
+struct boot_mem_map {
+	int nr_map;
+	struct boot_mem_map_entry {
+		phys_t addr;	/* start of memory segment */
+		phys_t size;	/* size of memory segment */
+		long type;		/* type of memory segment */
+	} map[BOOT_MEM_MAP_MAX];
+};
+
+extern struct boot_mem_map boot_mem_map;
+
+extern void add_memory_region(phys_t start, phys_t size, long type);
+
+extern void prom_init(void);
+extern void prom_free_prom_memory(void);
+
+extern void free_init_pages(const char *what,
+			    unsigned long begin, unsigned long end);
+
+/*
+ * Initial kernel command line, usually setup by prom_init()
+ */
+extern char arcs_cmdline[CL_SIZE];
+
+/*
+ * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware
+ */
+extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
+
+/*
+ * Platform memory detection hook called by setup_arch
+ */
+extern void plat_mem_setup(void);
+
+#endif /* _ASM_BOOTINFO_H */
diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h
new file mode 100644
index 0000000..37c6857
--- /dev/null
+++ b/arch/mips/include/asm/branch.h
@@ -0,0 +1,38 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2001 by Ralf Baechle
+ */
+#ifndef _ASM_BRANCH_H
+#define _ASM_BRANCH_H
+
+#include <asm/ptrace.h>
+
+static inline int delay_slot(struct pt_regs *regs)
+{
+	return regs->cp0_cause & CAUSEF_BD;
+}
+
+static inline unsigned long exception_epc(struct pt_regs *regs)
+{
+	if (!delay_slot(regs))
+		return regs->cp0_epc;
+
+	return regs->cp0_epc + 4;
+}
+
+extern int __compute_return_epc(struct pt_regs *regs);
+
+static inline int compute_return_epc(struct pt_regs *regs)
+{
+	if (!delay_slot(regs)) {
+		regs->cp0_epc += 4;
+		return 0;
+	}
+
+	return __compute_return_epc(regs);
+}
+
+#endif /* _ASM_BRANCH_H */
diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h
new file mode 100644
index 0000000..25b980c
--- /dev/null
+++ b/arch/mips/include/asm/break.h
@@ -0,0 +1,34 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_BREAK_H
+#define __ASM_BREAK_H
+
+/*
+ * The following break codes are or were in use for specific purposes in
+ * other MIPS operating systems.  Linux/MIPS doesn't use all of them.  The
+ * unused ones are here as placeholders; we might encounter them in
+ * non-Linux/MIPS object files or make use of them in the future.
+ */
+#define BRK_USERBP	0	/* User bp (used by debuggers) */
+#define BRK_KERNELBP	1	/* Break in the kernel */
+#define BRK_ABORT	2	/* Sometimes used by abort(3) to SIGIOT */
+#define BRK_BD_TAKEN	3	/* For bd slot emulation - not implemented */
+#define BRK_BD_NOTTAKEN	4	/* For bd slot emulation - not implemented */
+#define BRK_SSTEPBP	5	/* User bp (used by debuggers) */
+#define BRK_OVERFLOW	6	/* Overflow check */
+#define BRK_DIVZERO	7	/* Divide by zero check */
+#define BRK_RANGE	8	/* Range error check */
+#define BRK_STACKOVERFLOW 9	/* For Ada stackchecking */
+#define BRK_NORLD	10	/* No rld found - not used by Linux/MIPS */
+#define _BRK_THREADBP	11	/* For threads, user bp (used by debuggers) */
+#define BRK_BUG		512	/* Used by BUG() */
+#define BRK_KDB		513	/* Used in KDB_ENTER() */
+#define BRK_MULOVF	1023	/* Multiply overflow */
+
+#endif /* __ASM_BREAK_H */
diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h
new file mode 100644
index 0000000..7eb63de
--- /dev/null
+++ b/arch/mips/include/asm/bug.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_BUG_H
+#define __ASM_BUG_H
+
+#include <asm/sgidefs.h>
+
+#ifdef CONFIG_BUG
+
+#include <asm/break.h>
+
+#define BUG()								\
+do {									\
+	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));		\
+} while (0)
+
+#define HAVE_ARCH_BUG
+
+#if (_MIPS_ISA > _MIPS_ISA_MIPS1)
+
+#define BUG_ON(condition)						\
+do {									\
+	__asm__ __volatile__("tne $0, %0, %1"				\
+			     : : "r" (condition), "i" (BRK_BUG));	\
+} while (0)
+
+#define HAVE_ARCH_BUG_ON
+
+#endif /* _MIPS_ISA > _MIPS_ISA_MIPS1 */
+
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif /* __ASM_BUG_H */
diff --git a/arch/mips/include/asm/bugs.h b/arch/mips/include/asm/bugs.h
new file mode 100644
index 0000000..9dc10df
--- /dev/null
+++ b/arch/mips/include/asm/bugs.h
@@ -0,0 +1,53 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Copyright (C) 2007  Maciej W. Rozycki
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+
+#include <linux/bug.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+
+extern int daddiu_bug;
+
+extern void check_bugs64_early(void);
+
+extern void check_bugs32(void);
+extern void check_bugs64(void);
+
+static inline void check_bugs_early(void)
+{
+#ifdef CONFIG_64BIT
+	check_bugs64_early();
+#endif
+}
+
+static inline void check_bugs(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	cpu_data[cpu].udelay_val = loops_per_jiffy;
+	check_bugs32();
+#ifdef CONFIG_64BIT
+	check_bugs64();
+#endif
+}
+
+static inline int r4k_daddiu_bug(void)
+{
+#ifdef CONFIG_64BIT
+	WARN_ON(daddiu_bug < 0);
+	return daddiu_bug != 0;
+#else
+	return 0;
+#endif
+}
+
+#endif /* _ASM_BUGS_H */
diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h
new file mode 100644
index 0000000..fe7dc2d
--- /dev/null
+++ b/arch/mips/include/asm/byteorder.h
@@ -0,0 +1,76 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+#ifdef CONFIG_CPU_MIPSR2
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+	__asm__(
+	"	wsbh	%0, %1			\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+#define __arch__swab16(x)	___arch__swab16(x)
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	__asm__(
+	"	wsbh	%0, %1			\n"
+	"	rotr	%0, %0, 16		\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+#define __arch__swab32(x)	___arch__swab32(x)
+
+#ifdef CONFIG_CPU_MIPS64_R2
+
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+{
+	__asm__(
+	"	dsbh	%0, %1			\n"
+	"	dshd	%0, %0			\n"
+	"	drotr	%0, %0, 32		\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+#define __arch__swab64(x)	___arch__swab64(x)
+
+#endif /* CONFIG_CPU_MIPS64_R2 */
+
+#endif /* CONFIG_CPU_MIPSR2 */
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#if defined(__MIPSEB__)
+#  include <linux/byteorder/big_endian.h>
+#elif defined(__MIPSEL__)
+#  include <linux/byteorder/little_endian.h>
+#else
+#  error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h
new file mode 100644
index 0000000..37f175c
--- /dev/null
+++ b/arch/mips/include/asm/cache.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <kmalloc.h>
+
+#define L1_CACHE_SHIFT		CONFIG_MIPS_L1_CACHE_SHIFT
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define SMP_CACHE_SHIFT		L1_CACHE_SHIFT
+#define SMP_CACHE_BYTES		L1_CACHE_BYTES
+
+#endif /* _ASM_CACHE_H */
diff --git a/arch/mips/include/asm/cachectl.h b/arch/mips/include/asm/cachectl.h
new file mode 100644
index 0000000..f3ce721
--- /dev/null
+++ b/arch/mips/include/asm/cachectl.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996 by Ralf Baechle
+ */
+#ifndef	_ASM_CACHECTL
+#define	_ASM_CACHECTL
+
+/*
+ * Options for cacheflush system call
+ */
+#define	ICACHE	(1<<0)		/* flush instruction cache        */
+#define	DCACHE	(1<<1)		/* writeback and flush data cache */
+#define	BCACHE	(ICACHE|DCACHE)	/* flush both caches              */
+
+/*
+ * Caching modes for the cachectl(2) call
+ *
+ * cachectl(2) is currently not supported and returns ENOSYS.
+ */
+#define CACHEABLE	0	/* make pages cacheable */
+#define UNCACHEABLE	1	/* make pages uncacheable */
+
+#endif	/* _ASM_CACHECTL */
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
new file mode 100644
index 0000000..03b1d69
--- /dev/null
+++ b/arch/mips/include/asm/cacheflush.h
@@ -0,0 +1,116 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+#include <asm/cpu-features.h>
+
+/* Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *  - flush_icache_range(start, end) flush a range of instructions
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *
+ * MIPS specific flush operations:
+ *
+ *  - flush_cache_sigtramp() flush signal trampoline
+ *  - flush_icache_all() flush the entire instruction cache
+ *  - flush_data_cache_page() flushes a page from the data cache
+ */
+extern void (*flush_cache_all)(void);
+extern void (*__flush_cache_all)(void);
+extern void (*flush_cache_mm)(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
+extern void (*flush_cache_range)(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end);
+extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
+extern void __flush_dcache_page(struct page *page);
+
+static inline void flush_dcache_page(struct page *page)
+{
+	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
+		__flush_dcache_page(page);
+
+}
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define ARCH_HAS_FLUSH_ANON_PAGE
+extern void __flush_anon_page(struct page *, unsigned long);
+static inline void flush_anon_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vmaddr)
+{
+	if (cpu_has_dc_aliases && PageAnon(page))
+		__flush_anon_page(page, vmaddr);
+}
+
+static inline void flush_icache_page(struct vm_area_struct *vma,
+	struct page *page)
+{
+}
+
+extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
+
+extern void (*__flush_cache_vmap)(void);
+
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+	if (cpu_has_dc_aliases)
+		__flush_cache_vmap();
+}
+
+extern void (*__flush_cache_vunmap)(void);
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+	if (cpu_has_dc_aliases)
+		__flush_cache_vunmap();
+}
+
+extern void copy_to_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+
+extern void copy_from_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+
+extern void (*flush_cache_sigtramp)(unsigned long addr);
+extern void (*flush_icache_all)(void);
+extern void (*local_flush_data_cache_page)(void * addr);
+extern void (*flush_data_cache_page)(unsigned long addr);
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte
+ * is dirty and requires cleaning before returning it to the user.
+ */
+#define PG_dcache_dirty			PG_arch_1
+
+#define Page_dcache_dirty(page)		\
+	test_bit(PG_dcache_dirty, &(page)->flags)
+#define SetPageDcacheDirty(page)	\
+	set_bit(PG_dcache_dirty, &(page)->flags)
+#define ClearPageDcacheDirty(page)	\
+	clear_bit(PG_dcache_dirty, &(page)->flags)
+
+/* Run kernel code uncached, useful for cache probing functions. */
+unsigned long run_uncached(void *func);
+
+extern void *kmap_coherent(struct page *page, unsigned long addr);
+extern void kunmap_coherent(void);
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
new file mode 100644
index 0000000..256ad2cc
--- /dev/null
+++ b/arch/mips/include/asm/cacheops.h
@@ -0,0 +1,85 @@
+/*
+ * Cache operations for the cache instruction.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
+ * (C) Copyright 1999 Silicon Graphics, Inc.
+ */
+#ifndef	__ASM_CACHEOPS_H
+#define	__ASM_CACHEOPS_H
+
+/*
+ * Cache Operations available on all MIPS processors with R4000-style caches
+ */
+#define Index_Invalidate_I      0x00
+#define Index_Writeback_Inv_D   0x01
+#define Index_Load_Tag_I	0x04
+#define Index_Load_Tag_D	0x05
+#define Index_Store_Tag_I	0x08
+#define Index_Store_Tag_D	0x09
+#if defined(CONFIG_CPU_LOONGSON2)
+#define Hit_Invalidate_I    	0x00
+#else
+#define Hit_Invalidate_I	0x10
+#endif
+#define Hit_Invalidate_D	0x11
+#define Hit_Writeback_Inv_D	0x15
+
+/*
+ * R4000-specific cacheops
+ */
+#define Create_Dirty_Excl_D	0x0d
+#define Fill			0x14
+#define Hit_Writeback_I		0x18
+#define Hit_Writeback_D		0x19
+
+/*
+ * R4000SC and R4400SC-specific cacheops
+ */
+#define Index_Invalidate_SI     0x02
+#define Index_Writeback_Inv_SD  0x03
+#define Index_Load_Tag_SI	0x06
+#define Index_Load_Tag_SD	0x07
+#define Index_Store_Tag_SI	0x0A
+#define Index_Store_Tag_SD	0x0B
+#define Create_Dirty_Excl_SD	0x0f
+#define Hit_Invalidate_SI	0x12
+#define Hit_Invalidate_SD	0x13
+#define Hit_Writeback_Inv_SD	0x17
+#define Hit_Writeback_SD	0x1b
+#define Hit_Set_Virtual_SI	0x1e
+#define Hit_Set_Virtual_SD	0x1f
+
+/*
+ * R5000-specific cacheops
+ */
+#define R5K_Page_Invalidate_S	0x17
+
+/*
+ * RM7000-specific cacheops
+ */
+#define Page_Invalidate_T	0x16
+
+/*
+ * R10000-specific cacheops
+ *
+ * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
+ * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
+ */
+#define Index_Writeback_Inv_S	0x03
+#define Index_Load_Tag_S	0x07
+#define Index_Store_Tag_S	0x0B
+#define Hit_Invalidate_S	0x13
+#define Cache_Barrier		0x14
+#define Hit_Writeback_Inv_S	0x17
+#define Index_Load_Data_I	0x18
+#define Index_Load_Data_D	0x19
+#define Index_Load_Data_S	0x1b
+#define Index_Store_Data_I	0x1c
+#define Index_Store_Data_D	0x1d
+#define Index_Store_Data_S	0x1f
+
+#endif	/* __ASM_CACHEOPS_H */
diff --git a/arch/mips/include/asm/cevt-r4k.h b/arch/mips/include/asm/cevt-r4k.h
new file mode 100644
index 0000000..fa4328f
--- /dev/null
+++ b/arch/mips/include/asm/cevt-r4k.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
+
+/*
+ * Definitions used for common event timer implementation
+ * for MIPS 4K-type processors and their MIPS MT variants.
+ * Avoids unsightly extern declarations in C files.
+ */
+#ifndef __ASM_CEVT_R4K_H
+#define __ASM_CEVT_R4K_H
+
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+
+void mips_event_handler(struct clock_event_device *dev);
+int c0_compare_int_usable(void);
+void mips_set_clock_mode(enum clock_event_mode, struct clock_event_device *);
+irqreturn_t c0_compare_interrupt(int, void *);
+
+extern struct irqaction c0_compare_irqaction;
+extern int cp0_timer_irq_installed;
+
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+
+static inline int handle_perf_irq(int r2)
+{
+	/*
+	 * The performance counter overflow interrupt may be shared with the
+	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
+	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+	 * and we can't reliably determine if a counter interrupt has also
+	 * happened (!r2) then don't check for a timer interrupt.
+	 */
+	return (cp0_perfcount_irq < 0) &&
+		perf_irq() == IRQ_HANDLED &&
+		!r2;
+}
+
+#endif /* __ASM_CEVT_R4K_H */
diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h
new file mode 100644
index 0000000..290485a
--- /dev/null
+++ b/arch/mips/include/asm/checksum.h
@@ -0,0 +1,260 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2001 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 Thiemo Seufer.
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+__wsum __csum_partial_copy_user(const void *src, void *dst,
+				int len, __wsum sum, int *err_ptr);
+
+/*
+ * this is a new version of the above that records errors it finds in *errp,
+ * but continues and zeros the rest of the buffer.
+ */
+static inline
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+				   __wsum sum, int *err_ptr)
+{
+	might_sleep();
+	return __csum_partial_copy_user((__force void *)src, dst,
+					len, sum, err_ptr);
+}
+
+/*
+ * Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline
+__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
+			     __wsum sum, int *err_ptr)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, dst, len))
+		return __csum_partial_copy_user(src, (__force void *)dst,
+						len, sum, err_ptr);
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return (__force __wsum)-1; /* invalid checksum */
+}
+
+/*
+ * the same as csum_partial, but copies from user space (but on MIPS
+ * we have just one address space, so this is identical to the above)
+ */
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+				       int len, __wsum sum);
+
+/*
+ *	Fold a partial checksum without adding pseudo headers
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	__asm__(
+	"	.set	push		# csum_fold\n"
+	"	.set	noat		\n"
+	"	sll	$1, %0, 16	\n"
+	"	addu	%0, $1		\n"
+	"	sltu	$1, %0, $1	\n"
+	"	srl	%0, %0, 16	\n"
+	"	addu	%0, $1		\n"
+	"	xori	%0, 0xffff	\n"
+	"	.set	pop"
+	: "=r" (sum)
+	: "0" (sum));
+
+	return (__force __sum16)sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	const unsigned int *word = iph;
+	const unsigned int *stop = word + ihl;
+	unsigned int csum;
+	int carry;
+
+	csum = word[0];
+	csum += word[1];
+	carry = (csum < word[1]);
+	csum += carry;
+
+	csum += word[2];
+	carry = (csum < word[2]);
+	csum += carry;
+
+	csum += word[3];
+	carry = (csum < word[3]);
+	csum += carry;
+
+	word += 4;
+	do {
+		csum += *word;
+		carry = (csum < *word);
+		csum += carry;
+		word++;
+	} while (word != stop);
+
+	return csum_fold(csum);
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr,
+	__be32 daddr, unsigned short len, unsigned short proto,
+	__wsum sum)
+{
+	__asm__(
+	"	.set	push		# csum_tcpudp_nofold\n"
+	"	.set	noat		\n"
+#ifdef CONFIG_32BIT
+	"	addu	%0, %2		\n"
+	"	sltu	$1, %0, %2	\n"
+	"	addu	%0, $1		\n"
+
+	"	addu	%0, %3		\n"
+	"	sltu	$1, %0, %3	\n"
+	"	addu	%0, $1		\n"
+
+	"	addu	%0, %4		\n"
+	"	sltu	$1, %0, %4	\n"
+	"	addu	%0, $1		\n"
+#endif
+#ifdef CONFIG_64BIT
+	"	daddu	%0, %2		\n"
+	"	daddu	%0, %3		\n"
+	"	daddu	%0, %4		\n"
+	"	dsll32	$1, %0, 0	\n"
+	"	daddu	%0, $1		\n"
+	"	dsra32	%0, %0, 0	\n"
+#endif
+	"	.set	pop"
+	: "=r" (sum)
+	: "0" ((__force unsigned long)daddr),
+	  "r" ((__force unsigned long)saddr),
+#ifdef __MIPSEL__
+	  "r" ((proto + len) << 8),
+#else
+	  "r" (proto + len),
+#endif
+	  "r" ((__force unsigned long)sum));
+
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				          const struct in6_addr *daddr,
+					  __u32 len, unsigned short proto,
+					  __wsum sum)
+{
+	__asm__(
+	"	.set	push		# csum_ipv6_magic\n"
+	"	.set	noreorder	\n"
+	"	.set	noat		\n"
+	"	addu	%0, %5		# proto (long in network byte order)\n"
+	"	sltu	$1, %0, %5	\n"
+	"	addu	%0, $1		\n"
+
+	"	addu	%0, %6		# csum\n"
+	"	sltu	$1, %0, %6	\n"
+	"	lw	%1, 0(%2)	# four words source address\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 4(%2)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 8(%2)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 12(%2)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 0(%3)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 4(%3)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 8(%3)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 12(%3)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	addu	%0, $1		# Add final carry\n"
+	"	.set	pop"
+	: "=r" (sum), "=r" (proto)
+	: "r" (saddr), "r" (daddr),
+	  "0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
+
+	return csum_fold(sum);
+}
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/arch/mips/include/asm/cmp.h b/arch/mips/include/asm/cmp.h
new file mode 100644
index 0000000..89a73fb
--- /dev/null
+++ b/arch/mips/include/asm/cmp.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_CMP_H
+#define _ASM_CMP_H
+
+/*
+ * Definitions for CMP multitasking on MIPS cores
+ */
+struct task_struct;
+
+extern void cmp_smp_setup(void);
+extern void cmp_smp_finish(void);
+extern void cmp_boot_secondary(int cpu, struct task_struct *t);
+extern void cmp_init_secondary(void);
+extern void cmp_cpus_done(void);
+extern void cmp_prepare_cpus(unsigned int max_cpus);
+
+/* This is platform specific */
+extern void cmp_send_ipi(int cpu, unsigned int action);
+#endif /*  _ASM_CMP_H */
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
new file mode 100644
index 0000000..4a812c3
--- /dev/null
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -0,0 +1,124 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 06, 07 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_CMPXCHG_H
+#define __ASM_CMPXCHG_H
+
+#include <linux/irqflags.h>
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#define __cmpxchg_asm(ld, st, m, old, new)				\
+({									\
+	__typeof(*(m)) __ret;						\
+									\
+	if (cpu_has_llsc && R10000_LLSC_WAR) {				\
+		__asm__ __volatile__(					\
+		"	.set	push				\n"	\
+		"	.set	noat				\n"	\
+		"	.set	mips3				\n"	\
+		"1:	" ld "	%0, %2		# __cmpxchg_asm	\n"	\
+		"	bne	%0, %z3, 2f			\n"	\
+		"	.set	mips0				\n"	\
+		"	move	$1, %z4				\n"	\
+		"	.set	mips3				\n"	\
+		"	" st "	$1, %1				\n"	\
+		"	beqzl	$1, 1b				\n"	\
+		"2:						\n"	\
+		"	.set	pop				\n"	\
+		: "=&r" (__ret), "=R" (*m)				\
+		: "R" (*m), "Jr" (old), "Jr" (new)			\
+		: "memory");						\
+	} else if (cpu_has_llsc) {					\
+		__asm__ __volatile__(					\
+		"	.set	push				\n"	\
+		"	.set	noat				\n"	\
+		"	.set	mips3				\n"	\
+		"1:	" ld "	%0, %2		# __cmpxchg_asm	\n"	\
+		"	bne	%0, %z3, 2f			\n"	\
+		"	.set	mips0				\n"	\
+		"	move	$1, %z4				\n"	\
+		"	.set	mips3				\n"	\
+		"	" st "	$1, %1				\n"	\
+		"	beqz	$1, 3f				\n"	\
+		"2:						\n"	\
+		"	.subsection 2				\n"	\
+		"3:	b	1b				\n"	\
+		"	.previous				\n"	\
+		"	.set	pop				\n"	\
+		: "=&r" (__ret), "=R" (*m)				\
+		: "R" (*m), "Jr" (old), "Jr" (new)			\
+		: "memory");						\
+	} else {							\
+		unsigned long __flags;					\
+									\
+		raw_local_irq_save(__flags);				\
+		__ret = *m;						\
+		if (__ret == old)					\
+			*m = new;					\
+		raw_local_irq_restore(__flags);				\
+	}								\
+									\
+	__ret;								\
+})
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __cmpxchg(ptr, old, new, barrier)				\
+({									\
+	__typeof__(ptr) __ptr = (ptr);					\
+	__typeof__(*(ptr)) __old = (old);				\
+	__typeof__(*(ptr)) __new = (new);				\
+	__typeof__(*(ptr)) __res = 0;					\
+									\
+	barrier;							\
+									\
+	switch (sizeof(*(__ptr))) {					\
+	case 4:								\
+		__res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new);	\
+		break;							\
+	case 8:								\
+		if (sizeof(long) == 8) {				\
+			__res = __cmpxchg_asm("lld", "scd", __ptr,	\
+					   __old, __new);		\
+			break;						\
+		}							\
+	default:							\
+		__cmpxchg_called_with_bad_pointer();			\
+		break;							\
+	}								\
+									\
+	barrier;							\
+									\
+	__res;								\
+})
+
+#define cmpxchg(ptr, old, new)		__cmpxchg(ptr, old, new, smp_llsc_mb())
+#define cmpxchg_local(ptr, old, new)	__cmpxchg(ptr, old, new, )
+
+#define cmpxchg64(ptr, o, n)						\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+  })
+
+#ifdef CONFIG_64BIT
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+#else
+#include <asm-generic/cmpxchg-local.h>
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
+#endif /* __ASM_CMPXCHG_H */
diff --git a/arch/mips/include/asm/compat-signal.h b/arch/mips/include/asm/compat-signal.h
new file mode 100644
index 0000000..368a99e
--- /dev/null
+++ b/arch/mips/include/asm/compat-signal.h
@@ -0,0 +1,119 @@
+#ifndef __ASM_COMPAT_SIGNAL_H
+#define __ASM_COMPAT_SIGNAL_H
+
+#include <linux/bug.h>
+#include <linux/compat.h>
+#include <linux/compiler.h>
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+#include <asm/uaccess.h>
+
+#define SI_PAD_SIZE32   ((SI_MAX_SIZE/sizeof(int)) - 3)
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_code;
+	int si_errno;
+
+	union {
+		int _pad[SI_PAD_SIZE32];
+
+		/* kill() */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			compat_uid_t _uid;	/* sender's uid */
+		} _kill;
+
+		/* SIGCHLD */
+		struct {
+			compat_pid_t _pid;	/* which child */
+			compat_uid_t _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* IRIX SIGCHLD */
+		struct {
+			compat_pid_t _pid;	/* which child */
+			compat_clock_t _utime;
+			int _status;		/* exit code */
+			compat_clock_t _stime;
+		} _irix_sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			s32 _addr; /* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL, SIGXFSZ (To do ...)  */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			compat_uid_t _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+	} _sifields;
+} compat_siginfo_t;
+
+static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d,
+	const sigset_t *s)
+{
+	int err;
+
+	BUG_ON(sizeof(*d) != sizeof(*s));
+	BUG_ON(_NSIG_WORDS != 2);
+
+	err  = __put_user(s->sig[0],       &d->sig[0]);
+	err |= __put_user(s->sig[0] >> 32, &d->sig[1]);
+	err |= __put_user(s->sig[1],       &d->sig[2]);
+	err |= __put_user(s->sig[1] >> 32, &d->sig[3]);
+
+	return err;
+}
+
+static inline int __copy_conv_sigset_from_user(sigset_t *d,
+	const compat_sigset_t __user *s)
+{
+	int err;
+	union sigset_u {
+		sigset_t	s;
+		compat_sigset_t c;
+	} *u = (union sigset_u *) d;
+
+	BUG_ON(sizeof(*d) != sizeof(*s));
+	BUG_ON(_NSIG_WORDS != 2);
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	err  = __get_user(u->c.sig[1], &s->sig[0]);
+	err |= __get_user(u->c.sig[0], &s->sig[1]);
+	err |= __get_user(u->c.sig[3], &s->sig[2]);
+	err |= __get_user(u->c.sig[2], &s->sig[3]);
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	err  = __get_user(u->c.sig[0], &s->sig[0]);
+	err |= __get_user(u->c.sig[1], &s->sig[1]);
+	err |= __get_user(u->c.sig[2], &s->sig[2]);
+	err |= __get_user(u->c.sig[3], &s->sig[3]);
+#endif
+
+	return err;
+}
+
+#endif /* __ASM_COMPAT_SIGNAL_H */
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
new file mode 100644
index 0000000..ac5d541
--- /dev/null
+++ b/arch/mips/include/asm/compat.h
@@ -0,0 +1,221 @@
+#ifndef _ASM_COMPAT_H
+#define _ASM_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_suseconds_t;
+
+typedef s32		compat_pid_t;
+typedef s32		__compat_uid_t;
+typedef s32		__compat_gid_t;
+typedef __compat_uid_t	__compat_uid32_t;
+typedef __compat_gid_t	__compat_gid32_t;
+typedef u32		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u32		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u32		compat_nlink_t;
+typedef s32		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef s32		compat_caddr_t;
+typedef struct {
+	s32	val[2];
+} compat_fsid_t;
+typedef s32		compat_timer_t;
+typedef s32		compat_key_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	s32		st_pad1[3];
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	s32		st_pad2[2];
+	compat_off_t	st_size;
+	s32		st_pad3;
+	compat_time_t	st_atime;
+	s32		st_atime_nsec;
+	compat_time_t	st_mtime;
+	s32		st_mtime_nsec;
+	compat_time_t	st_ctime;
+	s32		st_ctime_nsec;
+	s32		st_blksize;
+	s32		st_blocks;
+	s32		st_pad4[14];
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	s32		l_sysid;
+	compat_pid_t	l_pid;
+	short		__unused;
+	s32		pad[4];
+};
+
+#define F_GETLK64	33
+#define F_SETLK64	34
+#define F_SETLKW64	35
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_frsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_files;
+	int		f_ffree;
+	int		f_bavail;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;
+	int		f_spare[6];
+};
+
+#define COMPAT_RLIM_INFINITY	0x7fffffffUL
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		128		/* Don't ask !$@#% ...  */
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	/* cast to a __user pointer via "unsigned long" makes sparse happy */
+	return (void __user *)(unsigned long)(long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = (struct pt_regs *)
+		((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1;
+
+	return (void __user *) (regs->regs[29] - len);
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	compat_mode_t mode;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t	sem_otime;
+	compat_time_t	sem_ctime;
+	compat_ulong_t	sem_nsems;
+	compat_ulong_t	__unused1;
+	compat_ulong_t	__unused2;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused1;
+#endif
+	compat_time_t	msg_stime;
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused1;
+#endif
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused2;
+#endif
+	compat_time_t	msg_rtime;
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused2;
+#endif
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused3;
+#endif
+	compat_time_t	msg_ctime;
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused3;
+#endif
+	compat_ulong_t	msg_cbytes;
+	compat_ulong_t	msg_qnum;
+	compat_ulong_t	msg_qbytes;
+	compat_pid_t	msg_lspid;
+	compat_pid_t	msg_lrpid;
+	compat_ulong_t	__unused4;
+	compat_ulong_t	__unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t	shm_segsz;
+	compat_time_t	shm_atime;
+	compat_time_t	shm_dtime;
+	compat_time_t	shm_ctime;
+	compat_pid_t	shm_cpid;
+	compat_pid_t	shm_lpid;
+	compat_ulong_t	shm_nattch;
+	compat_ulong_t	__unused1;
+	compat_ulong_t	__unused2;
+};
+
+#endif /* _ASM_COMPAT_H */
diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h
new file mode 100644
index 0000000..71f5c5c
--- /dev/null
+++ b/arch/mips/include/asm/compiler.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004, 2007  Maciej W. Rozycki
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_COMPILER_H
+#define _ASM_COMPILER_H
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
+#define GCC_IMM_ASM() "n"
+#define GCC_REG_ACCUM "$0"
+#else
+#define GCC_IMM_ASM() "rn"
+#define GCC_REG_ACCUM "accum"
+#endif
+
+#endif /* _ASM_COMPILER_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
new file mode 100644
index 0000000..5ea701f
--- /dev/null
+++ b/arch/mips/include/asm/cpu-features.h
@@ -0,0 +1,219 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004  Maciej W. Rozycki
+ */
+#ifndef __ASM_CPU_FEATURES_H
+#define __ASM_CPU_FEATURES_H
+
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <cpu-feature-overrides.h>
+
+#ifndef current_cpu_type
+#define current_cpu_type()      current_cpu_data.cputype
+#endif
+
+/*
+ * SMP assumption: Options of CPU 0 are a superset of all processors.
+ * This is true for all known MIPS systems.
+ */
+#ifndef cpu_has_tlb
+#define cpu_has_tlb		(cpu_data[0].options & MIPS_CPU_TLB)
+#endif
+#ifndef cpu_has_4kex
+#define cpu_has_4kex		(cpu_data[0].options & MIPS_CPU_4KEX)
+#endif
+#ifndef cpu_has_3k_cache
+#define cpu_has_3k_cache	(cpu_data[0].options & MIPS_CPU_3K_CACHE)
+#endif
+#define cpu_has_6k_cache	0
+#define cpu_has_8k_cache	0
+#ifndef cpu_has_4k_cache
+#define cpu_has_4k_cache	(cpu_data[0].options & MIPS_CPU_4K_CACHE)
+#endif
+#ifndef cpu_has_tx39_cache
+#define cpu_has_tx39_cache	(cpu_data[0].options & MIPS_CPU_TX39_CACHE)
+#endif
+#ifndef cpu_has_fpu
+#define cpu_has_fpu		(current_cpu_data.options & MIPS_CPU_FPU)
+#define raw_cpu_has_fpu		(raw_current_cpu_data.options & MIPS_CPU_FPU)
+#else
+#define raw_cpu_has_fpu		cpu_has_fpu
+#endif
+#ifndef cpu_has_32fpr
+#define cpu_has_32fpr		(cpu_data[0].options & MIPS_CPU_32FPR)
+#endif
+#ifndef cpu_has_counter
+#define cpu_has_counter		(cpu_data[0].options & MIPS_CPU_COUNTER)
+#endif
+#ifndef cpu_has_watch
+#define cpu_has_watch		(cpu_data[0].options & MIPS_CPU_WATCH)
+#endif
+#ifndef cpu_has_divec
+#define cpu_has_divec		(cpu_data[0].options & MIPS_CPU_DIVEC)
+#endif
+#ifndef cpu_has_vce
+#define cpu_has_vce		(cpu_data[0].options & MIPS_CPU_VCE)
+#endif
+#ifndef cpu_has_cache_cdex_p
+#define cpu_has_cache_cdex_p	(cpu_data[0].options & MIPS_CPU_CACHE_CDEX_P)
+#endif
+#ifndef cpu_has_cache_cdex_s
+#define cpu_has_cache_cdex_s	(cpu_data[0].options & MIPS_CPU_CACHE_CDEX_S)
+#endif
+#ifndef cpu_has_prefetch
+#define cpu_has_prefetch	(cpu_data[0].options & MIPS_CPU_PREFETCH)
+#endif
+#ifndef cpu_has_mcheck
+#define cpu_has_mcheck		(cpu_data[0].options & MIPS_CPU_MCHECK)
+#endif
+#ifndef cpu_has_ejtag
+#define cpu_has_ejtag		(cpu_data[0].options & MIPS_CPU_EJTAG)
+#endif
+#ifndef cpu_has_llsc
+#define cpu_has_llsc		(cpu_data[0].options & MIPS_CPU_LLSC)
+#endif
+#ifndef cpu_has_mips16
+#define cpu_has_mips16		(cpu_data[0].ases & MIPS_ASE_MIPS16)
+#endif
+#ifndef cpu_has_mdmx
+#define cpu_has_mdmx           (cpu_data[0].ases & MIPS_ASE_MDMX)
+#endif
+#ifndef cpu_has_mips3d
+#define cpu_has_mips3d         (cpu_data[0].ases & MIPS_ASE_MIPS3D)
+#endif
+#ifndef cpu_has_smartmips
+#define cpu_has_smartmips      (cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
+#endif
+#ifndef cpu_has_vtag_icache
+#define cpu_has_vtag_icache	(cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
+#endif
+#ifndef cpu_has_dc_aliases
+#define cpu_has_dc_aliases	(cpu_data[0].dcache.flags & MIPS_CACHE_ALIASES)
+#endif
+#ifndef cpu_has_ic_fills_f_dc
+#define cpu_has_ic_fills_f_dc	(cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC)
+#endif
+#ifndef cpu_has_pindexed_dcache
+#define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+#endif
+
+/*
+ * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
+ * such as the R10000 have I-Caches that snoop local stores; the embedded ones
+ * don't.  For maintaining I-cache coherency this means we need to flush the
+ * D-cache all the way back to whever the I-cache does refills from, so the
+ * I-cache has a chance to see the new data at all.  Then we have to flush the
+ * I-cache also.
+ * Note we may have been rescheduled and may no longer be running on the CPU
+ * that did the store so we can't optimize this into only doing the flush on
+ * the local CPU.
+ */
+#ifndef cpu_icache_snoops_remote_store
+#ifdef CONFIG_SMP
+#define cpu_icache_snoops_remote_store	(cpu_data[0].icache.flags & MIPS_IC_SNOOPS_REMOTE)
+#else
+#define cpu_icache_snoops_remote_store	1
+#endif
+#endif
+
+# ifndef cpu_has_mips32r1
+# define cpu_has_mips32r1	(cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1)
+# endif
+# ifndef cpu_has_mips32r2
+# define cpu_has_mips32r2	(cpu_data[0].isa_level & MIPS_CPU_ISA_M32R2)
+# endif
+# ifndef cpu_has_mips64r1
+# define cpu_has_mips64r1	(cpu_data[0].isa_level & MIPS_CPU_ISA_M64R1)
+# endif
+# ifndef cpu_has_mips64r2
+# define cpu_has_mips64r2	(cpu_data[0].isa_level & MIPS_CPU_ISA_M64R2)
+# endif
+
+/*
+ * Shortcuts ...
+ */
+#define cpu_has_mips32	(cpu_has_mips32r1 | cpu_has_mips32r2)
+#define cpu_has_mips64	(cpu_has_mips64r1 | cpu_has_mips64r2)
+#define cpu_has_mips_r1	(cpu_has_mips32r1 | cpu_has_mips64r1)
+#define cpu_has_mips_r2	(cpu_has_mips32r2 | cpu_has_mips64r2)
+
+#ifndef cpu_has_dsp
+#define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)
+#endif
+
+#ifndef cpu_has_mipsmt
+#define cpu_has_mipsmt		(cpu_data[0].ases & MIPS_ASE_MIPSMT)
+#endif
+
+#ifndef cpu_has_userlocal
+#define cpu_has_userlocal	(cpu_data[0].options & MIPS_CPU_ULRI)
+#endif
+
+#ifdef CONFIG_32BIT
+# ifndef cpu_has_nofpuex
+# define cpu_has_nofpuex	(cpu_data[0].options & MIPS_CPU_NOFPUEX)
+# endif
+# ifndef cpu_has_64bits
+# define cpu_has_64bits		(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
+# endif
+# ifndef cpu_has_64bit_zero_reg
+# define cpu_has_64bit_zero_reg	(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
+# endif
+# ifndef cpu_has_64bit_gp_regs
+# define cpu_has_64bit_gp_regs		0
+# endif
+# ifndef cpu_has_64bit_addresses
+# define cpu_has_64bit_addresses	0
+# endif
+#endif
+
+#ifdef CONFIG_64BIT
+# ifndef cpu_has_nofpuex
+# define cpu_has_nofpuex		0
+# endif
+# ifndef cpu_has_64bits
+# define cpu_has_64bits			1
+# endif
+# ifndef cpu_has_64bit_zero_reg
+# define cpu_has_64bit_zero_reg		1
+# endif
+# ifndef cpu_has_64bit_gp_regs
+# define cpu_has_64bit_gp_regs		1
+# endif
+# ifndef cpu_has_64bit_addresses
+# define cpu_has_64bit_addresses	1
+# endif
+#endif
+
+#if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
+# define cpu_has_vint		(cpu_data[0].options & MIPS_CPU_VINT)
+#elif !defined(cpu_has_vint)
+# define cpu_has_vint			0
+#endif
+
+#if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
+# define cpu_has_veic		(cpu_data[0].options & MIPS_CPU_VEIC)
+#elif !defined(cpu_has_veic)
+# define cpu_has_veic			0
+#endif
+
+#ifndef cpu_has_inclusive_pcaches
+#define cpu_has_inclusive_pcaches	(cpu_data[0].options & MIPS_CPU_INCLUSIVE_CACHES)
+#endif
+
+#ifndef cpu_dcache_line_size
+#define cpu_dcache_line_size()	cpu_data[0].dcache.linesz
+#endif
+#ifndef cpu_icache_line_size
+#define cpu_icache_line_size()	cpu_data[0].icache.linesz
+#endif
+#ifndef cpu_scache_line_size
+#define cpu_scache_line_size()	cpu_data[0].scache.linesz
+#endif
+
+#endif /* __ASM_CPU_FEATURES_H */
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
new file mode 100644
index 0000000..744cd8f
--- /dev/null
+++ b/arch/mips/include/asm/cpu-info.h
@@ -0,0 +1,90 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 Waldorf GMBH
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004  Maciej W. Rozycki
+ */
+#ifndef __ASM_CPU_INFO_H
+#define __ASM_CPU_INFO_H
+
+#include <linux/types.h>
+
+#include <asm/cache.h>
+
+/*
+ * Descriptor for a cache
+ */
+struct cache_desc {
+	unsigned int waysize;	/* Bytes per way */
+	unsigned short sets;	/* Number of lines per set */
+	unsigned char ways;	/* Number of ways */
+	unsigned char linesz;	/* Size of line in bytes */
+	unsigned char waybit;	/* Bits to select in a cache set */
+	unsigned char flags;	/* Flags describing cache properties */
+};
+
+/*
+ * Flag definitions
+ */
+#define MIPS_CACHE_NOT_PRESENT	0x00000001
+#define MIPS_CACHE_VTAG		0x00000002	/* Virtually tagged cache */
+#define MIPS_CACHE_ALIASES	0x00000004	/* Cache could have aliases */
+#define MIPS_CACHE_IC_F_DC	0x00000008	/* Ic can refill from D-cache */
+#define MIPS_IC_SNOOPS_REMOTE	0x00000010	/* Ic snoops remote stores */
+#define MIPS_CACHE_PINDEX	0x00000020	/* Physically indexed cache */
+
+struct cpuinfo_mips {
+	unsigned long		udelay_val;
+	unsigned long		asid_cache;
+
+	/*
+	 * Capability and feature descriptor structure for MIPS CPU
+	 */
+	unsigned long		options;
+	unsigned long		ases;
+	unsigned int		processor_id;
+	unsigned int		fpu_id;
+	unsigned int		cputype;
+	int			isa_level;
+	int			tlbsize;
+	struct cache_desc	icache;	/* Primary I-cache */
+	struct cache_desc	dcache;	/* Primary D or combined I/D cache */
+	struct cache_desc	scache;	/* Secondary cache */
+	struct cache_desc	tcache;	/* Tertiary/split secondary cache */
+	int			srsets;	/* Shadow register sets */
+	int			core;	/* physical core number */
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+	/*
+	 * In the MIPS MT "SMTC" model, each TC is considered
+	 * to be a "CPU" for the purposes of scheduling, but
+	 * exception resources, ASID spaces, etc, are common
+	 * to all TCs within the same VPE.
+	 */
+	int			vpe_id;  /* Virtual Processor number */
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+	int			tc_id;   /* Thread Context number */
+#endif
+	void 			*data;	/* Additional data */
+	unsigned int		watch_reg_count;   /* Number that exist */
+	unsigned int		watch_reg_use_cnt; /* Usable by ptrace */
+#define NUM_WATCH_REGS 4
+	u16			watch_reg_masks[NUM_WATCH_REGS];
+} __attribute__((aligned(SMP_CACHE_BYTES)));
+
+extern struct cpuinfo_mips cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+extern void cpu_probe(void);
+extern void cpu_report(void);
+
+extern const char *__cpu_name[];
+#define cpu_name_string()	__cpu_name[smp_processor_id()]
+
+#endif /* __ASM_CPU_INFO_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
new file mode 100644
index 0000000..229a786
--- /dev/null
+++ b/arch/mips/include/asm/cpu.h
@@ -0,0 +1,267 @@
+/*
+ * cpu.h: Values of the PRId register used to match up
+ *        various MIPS cpu types.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 2004  Maciej W. Rozycki
+ */
+#ifndef _ASM_CPU_H
+#define _ASM_CPU_H
+
+/* Assigned Company values for bits 23:16 of the PRId Register
+   (CP0 register 15, select 0).  As of the MIPS32 and MIPS64 specs from
+   MTI, the PRId register is defined in this (backwards compatible)
+   way:
+
+  +----------------+----------------+----------------+----------------+
+  | Company Options| Company ID     | Processor ID   | Revision       |
+  +----------------+----------------+----------------+----------------+
+   31            24 23            16 15             8 7
+
+   I don't have docs for all the previous processors, but my impression is
+   that bits 16-23 have been 0 for all MIPS processors before the MIPS32/64
+   spec.
+*/
+
+#define PRID_COMP_LEGACY	0x000000
+#define PRID_COMP_MIPS		0x010000
+#define PRID_COMP_BROADCOM	0x020000
+#define PRID_COMP_ALCHEMY	0x030000
+#define PRID_COMP_SIBYTE	0x040000
+#define PRID_COMP_SANDCRAFT	0x050000
+#define PRID_COMP_NXP   	0x060000
+#define PRID_COMP_TOSHIBA	0x070000
+#define PRID_COMP_LSI		0x080000
+#define PRID_COMP_LEXRA		0x0b0000
+
+
+/*
+ * Assigned values for the product ID register.  In order to detect a
+ * certain CPU type exactly eventually additional registers may need to
+ * be examined.  These are valid when 23:16 == PRID_COMP_LEGACY
+ */
+#define PRID_IMP_R2000		0x0100
+#define PRID_IMP_AU1_REV1	0x0100
+#define PRID_IMP_AU1_REV2	0x0200
+#define PRID_IMP_R3000		0x0200		/* Same as R2000A  */
+#define PRID_IMP_R6000		0x0300		/* Same as R3000A  */
+#define PRID_IMP_R4000		0x0400
+#define PRID_IMP_R6000A		0x0600
+#define PRID_IMP_R10000		0x0900
+#define PRID_IMP_R4300		0x0b00
+#define PRID_IMP_VR41XX		0x0c00
+#define PRID_IMP_R12000		0x0e00
+#define PRID_IMP_R14000		0x0f00
+#define PRID_IMP_R8000		0x1000
+#define PRID_IMP_PR4450		0x1200
+#define PRID_IMP_R4600		0x2000
+#define PRID_IMP_R4700		0x2100
+#define PRID_IMP_TX39		0x2200
+#define PRID_IMP_R4640		0x2200
+#define PRID_IMP_R4650		0x2200		/* Same as R4640 */
+#define PRID_IMP_R5000		0x2300
+#define PRID_IMP_TX49		0x2d00
+#define PRID_IMP_SONIC		0x2400
+#define PRID_IMP_MAGIC		0x2500
+#define PRID_IMP_RM7000		0x2700
+#define PRID_IMP_NEVADA		0x2800		/* RM5260 ??? */
+#define PRID_IMP_RM9000		0x3400
+#define PRID_IMP_LOONGSON1	0x4200
+#define PRID_IMP_R5432		0x5400
+#define PRID_IMP_R5500		0x5500
+#define PRID_IMP_LOONGSON2	0x6300
+
+#define PRID_IMP_UNKNOWN	0xff00
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_MIPS
+ */
+
+#define PRID_IMP_4KC		0x8000
+#define PRID_IMP_5KC		0x8100
+#define PRID_IMP_20KC		0x8200
+#define PRID_IMP_4KEC		0x8400
+#define PRID_IMP_4KSC		0x8600
+#define PRID_IMP_25KF		0x8800
+#define PRID_IMP_5KE		0x8900
+#define PRID_IMP_4KECR2		0x9000
+#define PRID_IMP_4KEMPR2	0x9100
+#define PRID_IMP_4KSD		0x9200
+#define PRID_IMP_24K		0x9300
+#define PRID_IMP_34K		0x9500
+#define PRID_IMP_24KE		0x9600
+#define PRID_IMP_74K		0x9700
+#define PRID_IMP_1004K		0x9900
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
+ */
+
+#define PRID_IMP_SB1            0x0100
+#define PRID_IMP_SB1A           0x1100
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT
+ */
+
+#define PRID_IMP_SR71000        0x0400
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
+ */
+
+#define PRID_IMP_BCM4710	0x4000
+#define PRID_IMP_BCM3302	0x9000
+
+/*
+ * Definitions for 7:0 on legacy processors
+ */
+
+#define PRID_REV_MASK		0x00ff
+
+#define PRID_REV_TX4927		0x0022
+#define PRID_REV_TX4937		0x0030
+#define PRID_REV_R4400		0x0040
+#define PRID_REV_R3000A		0x0030
+#define PRID_REV_R3000		0x0020
+#define PRID_REV_R2000A		0x0010
+#define PRID_REV_TX3912 	0x0010
+#define PRID_REV_TX3922 	0x0030
+#define PRID_REV_TX3927 	0x0040
+#define PRID_REV_VR4111		0x0050
+#define PRID_REV_VR4181		0x0050	/* Same as VR4111 */
+#define PRID_REV_VR4121		0x0060
+#define PRID_REV_VR4122		0x0070
+#define PRID_REV_VR4181A	0x0070	/* Same as VR4122 */
+#define PRID_REV_VR4130		0x0080
+#define PRID_REV_34K_V1_0_2	0x0022
+
+/*
+ * Older processors used to encode processor version and revision in two
+ * 4-bit bitfields, the 4K seems to simply count up and even newer MTI cores
+ * have switched to use the 8-bits as 3:3:2 bitfield with the last field as
+ * the patch number.  *ARGH*
+ */
+#define PRID_REV_ENCODE_44(ver, rev)					\
+	((ver) << 4 | (rev))
+#define PRID_REV_ENCODE_332(ver, rev, patch)				\
+	((ver) << 5 | (rev) << 2 | (patch))
+
+/*
+ * FPU implementation/revision register (CP1 control register 0).
+ *
+ * +---------------------------------+----------------+----------------+
+ * | 0                               | Implementation | Revision       |
+ * +---------------------------------+----------------+----------------+
+ *  31                             16 15             8 7              0
+ */
+
+#define FPIR_IMP_NONE		0x0000
+
+enum cpu_type_enum {
+	CPU_UNKNOWN,
+
+	/*
+	 * R2000 class processors
+	 */
+	CPU_R2000, CPU_R3000, CPU_R3000A, CPU_R3041, CPU_R3051, CPU_R3052,
+	CPU_R3081, CPU_R3081E,
+
+	/*
+	 * R6000 class processors
+	 */
+	CPU_R6000, CPU_R6000A,
+
+	/*
+	 * R4000 class processors
+	 */
+	CPU_R4000PC, CPU_R4000SC, CPU_R4000MC, CPU_R4200, CPU_R4300, CPU_R4310,
+	CPU_R4400PC, CPU_R4400SC, CPU_R4400MC, CPU_R4600, CPU_R4640, CPU_R4650,
+	CPU_R4700, CPU_R5000, CPU_R5000A, CPU_R5500, CPU_NEVADA, CPU_R5432,
+	CPU_R10000, CPU_R12000, CPU_R14000, CPU_VR41XX, CPU_VR4111, CPU_VR4121,
+	CPU_VR4122, CPU_VR4131, CPU_VR4133, CPU_VR4181, CPU_VR4181A, CPU_RM7000,
+	CPU_SR71000, CPU_RM9000, CPU_TX49XX,
+
+	/*
+	 * R8000 class processors
+	 */
+	CPU_R8000,
+
+	/*
+	 * TX3900 class processors
+	 */
+	CPU_TX3912, CPU_TX3922, CPU_TX3927,
+
+	/*
+	 * MIPS32 class processors
+	 */
+	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
+	CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500,
+	CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710,
+
+	/*
+	 * MIPS64 class processors
+	 */
+	CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
+
+	CPU_LAST
+};
+
+
+/*
+ * ISA Level encodings
+ *
+ */
+#define MIPS_CPU_ISA_I		0x00000001
+#define MIPS_CPU_ISA_II		0x00000002
+#define MIPS_CPU_ISA_III	0x00000004
+#define MIPS_CPU_ISA_IV		0x00000008
+#define MIPS_CPU_ISA_V		0x00000010
+#define MIPS_CPU_ISA_M32R1	0x00000020
+#define MIPS_CPU_ISA_M32R2	0x00000040
+#define MIPS_CPU_ISA_M64R1	0x00000080
+#define MIPS_CPU_ISA_M64R2	0x00000100
+
+#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \
+	MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 )
+#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
+	MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)
+
+/*
+ * CPU Option encodings
+ */
+#define MIPS_CPU_TLB		0x00000001 /* CPU has TLB */
+#define MIPS_CPU_4KEX		0x00000002 /* "R4K" exception model */
+#define MIPS_CPU_3K_CACHE	0x00000004 /* R3000-style caches */
+#define MIPS_CPU_4K_CACHE	0x00000008 /* R4000-style caches */
+#define MIPS_CPU_TX39_CACHE	0x00000010 /* TX3900-style caches */
+#define MIPS_CPU_FPU		0x00000020 /* CPU has FPU */
+#define MIPS_CPU_32FPR		0x00000040 /* 32 dbl. prec. FP registers */
+#define MIPS_CPU_COUNTER	0x00000080 /* Cycle count/compare */
+#define MIPS_CPU_WATCH		0x00000100 /* watchpoint registers */
+#define MIPS_CPU_DIVEC		0x00000200 /* dedicated interrupt vector */
+#define MIPS_CPU_VCE		0x00000400 /* virt. coherence conflict possible */
+#define MIPS_CPU_CACHE_CDEX_P	0x00000800 /* Create_Dirty_Exclusive CACHE op */
+#define MIPS_CPU_CACHE_CDEX_S	0x00001000 /* ... same for seconary cache ... */
+#define MIPS_CPU_MCHECK		0x00002000 /* Machine check exception */
+#define MIPS_CPU_EJTAG		0x00004000 /* EJTAG exception */
+#define MIPS_CPU_NOFPUEX	0x00008000 /* no FPU exception */
+#define MIPS_CPU_LLSC		0x00010000 /* CPU has ll/sc instructions */
+#define MIPS_CPU_INCLUSIVE_CACHES	0x00020000 /* P-cache subset enforced */
+#define MIPS_CPU_PREFETCH	0x00040000 /* CPU has usable prefetch */
+#define MIPS_CPU_VINT		0x00080000 /* CPU supports MIPSR2 vectored interrupts */
+#define MIPS_CPU_VEIC		0x00100000 /* CPU supports MIPSR2 external interrupt controller mode */
+#define MIPS_CPU_ULRI		0x00200000 /* CPU has ULRI feature */
+
+/*
+ * CPU ASE encodings
+ */
+#define MIPS_ASE_MIPS16		0x00000001 /* code compression */
+#define MIPS_ASE_MDMX		0x00000002 /* MIPS digital media extension */
+#define MIPS_ASE_MIPS3D		0x00000004 /* MIPS-3D */
+#define MIPS_ASE_SMARTMIPS	0x00000008 /* SmartMIPS */
+#define MIPS_ASE_DSP		0x00000010 /* Signal Processing ASE */
+#define MIPS_ASE_MIPSMT		0x00000020 /* CPU supports MIPS MT */
+
+
+#endif /* _ASM_CPU_H */
diff --git a/arch/mips/include/asm/cputime.h b/arch/mips/include/asm/cputime.h
new file mode 100644
index 0000000..c00eacb
--- /dev/null
+++ b/arch/mips/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __MIPS_CPUTIME_H
+#define __MIPS_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __MIPS_CPUTIME_H */
diff --git a/arch/mips/include/asm/current.h b/arch/mips/include/asm/current.h
new file mode 100644
index 0000000..559db66
--- /dev/null
+++ b/arch/mips/include/asm/current.h
@@ -0,0 +1,23 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2002 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current		get_current()
+
+#endif /* _ASM_CURRENT_H */
diff --git a/arch/mips/include/asm/debug.h b/arch/mips/include/asm/debug.h
new file mode 100644
index 0000000..1fd5a2b
--- /dev/null
+++ b/arch/mips/include/asm/debug.h
@@ -0,0 +1,48 @@
+/*
+ * Debug macros for run-time debugging.
+ * Turned on/off with CONFIG_RUNTIME_DEBUG option.
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _ASM_DEBUG_H
+#define _ASM_DEBUG_H
+
+
+/*
+ * run-time macros for catching spurious errors.  Eable CONFIG_RUNTIME_DEBUG in
+ * kernel hacking config menu to use them.
+ *
+ * Use them as run-time debugging aid.  NEVER USE THEM AS ERROR HANDLING CODE!!!
+ */
+
+#ifdef CONFIG_RUNTIME_DEBUG
+
+#include <linux/kernel.h>
+
+#define db_assert(x)  if (!(x)) { \
+	panic("assertion failed at %s:%d: %s", __FILE__, __LINE__, #x); }
+#define db_warn(x)  if (!(x)) { \
+	printk(KERN_WARNING "warning at %s:%d: %s", __FILE__, __LINE__, #x); }
+#define db_verify(x, y) db_assert(x y)
+#define db_verify_warn(x, y) db_warn(x y)
+#define db_run(x)  do { x; } while (0)
+
+#else
+
+#define db_assert(x)
+#define db_warn(x)
+#define db_verify(x, y) x
+#define db_verify_warn(x, y) x
+#define db_run(x)
+
+#endif
+
+#endif /* _ASM_DEBUG_H */
diff --git a/arch/mips/include/asm/dec/ecc.h b/arch/mips/include/asm/dec/ecc.h
new file mode 100644
index 0000000..707ffdb
--- /dev/null
+++ b/arch/mips/include/asm/dec/ecc.h
@@ -0,0 +1,55 @@
+/*
+ *	include/asm-mips/dec/ecc.h
+ *
+ *	ECC handling logic definitions common to DECstation/DECsystem
+ *	5000/200 (KN02), 5000/240 (KN03), 5000/260 (KN05) and
+ *	DECsystem 5900 (KN03), 5900/260 (KN05) systems.
+ *
+ *	Copyright (C) 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_ECC_H
+#define __ASM_MIPS_DEC_ECC_H
+
+/*
+ * Error Address Register bits.
+ * The register is r/wc -- any write clears it.
+ */
+#define KN0X_EAR_VALID		(1<<31)		/* error data valid, bus IRQ */
+#define KN0X_EAR_CPU		(1<<30)		/* CPU/DMA transaction */
+#define KN0X_EAR_WRITE		(1<<29)		/* write/read transaction */
+#define KN0X_EAR_ECCERR		(1<<28)		/* ECC/timeout or overrun */
+#define KN0X_EAR_RES_27		(1<<27)		/* unused */
+#define KN0X_EAR_ADDRESS	(0x7ffffff<<0)	/* address involved */
+
+/*
+ * Error Syndrome Register bits.
+ * The register is frozen when EAR.VALID is set, otherwise it records bits
+ * from the last memory read.  The register is r/wc -- any write clears it.
+ */
+#define KN0X_ESR_VLDHI		(1<<31)		/* error data valid hi word */
+#define KN0X_ESR_CHKHI		(0x7f<<24)	/* check bits read from mem */
+#define KN0X_ESR_SNGHI		(1<<23)		/* single/double bit error */
+#define KN0X_ESR_SYNHI		(0x7f<<16)	/* syndrome from ECC logic */
+#define KN0X_ESR_VLDLO		(1<<15)		/* error data valid lo word */
+#define KN0X_ESR_CHKLO		(0x7f<<8)	/* check bits read from mem */
+#define KN0X_ESR_SNGLO		(1<<7)		/* single/double bit error */
+#define KN0X_ESR_SYNLO		(0x7f<<0)	/* syndrome from ECC logic */
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_ecc_be_init(void);
+extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id);
+#endif
+
+#endif /* __ASM_MIPS_DEC_ECC_H */
diff --git a/arch/mips/include/asm/dec/interrupts.h b/arch/mips/include/asm/dec/interrupts.h
new file mode 100644
index 0000000..e10d341
--- /dev/null
+++ b/arch/mips/include/asm/dec/interrupts.h
@@ -0,0 +1,126 @@
+/*
+ * Miscellaneous definitions used to initialise the interrupt vector table
+ * with the machine-specific interrupt routines.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 by Paul M. Antoine.
+ * reworked 1998 by Harald Koerfgen.
+ * Copyright (C) 2001, 2002, 2003  Maciej W. Rozycki
+ */
+
+#ifndef __ASM_DEC_INTERRUPTS_H
+#define __ASM_DEC_INTERRUPTS_H
+
+#include <irq.h>
+#include <asm/mipsregs.h>
+
+
+/*
+ * The list of possible system devices which provide an
+ * interrupt.  Not all devices exist on a given system.
+ */
+#define DEC_IRQ_CASCADE		0	/* cascade from CSR or I/O ASIC */
+
+/* Ordinary interrupts */
+#define DEC_IRQ_AB_RECV		1	/* ACCESS.bus receive */
+#define DEC_IRQ_AB_XMIT		2	/* ACCESS.bus transmit */
+#define DEC_IRQ_DZ11		3	/* DZ11 (DC7085) serial */
+#define DEC_IRQ_ASC		4	/* ASC (NCR53C94) SCSI */
+#define DEC_IRQ_FLOPPY		5	/* 82077 FDC */
+#define DEC_IRQ_FPU		6	/* R3k FPU */
+#define DEC_IRQ_HALT		7	/* HALT button or from ACCESS.Bus */
+#define DEC_IRQ_ISDN		8	/* Am79C30A ISDN */
+#define DEC_IRQ_LANCE		9	/* LANCE (Am7990) Ethernet */
+#define DEC_IRQ_BUS		10	/* memory, I/O bus read/write errors */
+#define DEC_IRQ_PSU		11	/* power supply unit warning */
+#define DEC_IRQ_RTC		12	/* DS1287 RTC */
+#define DEC_IRQ_SCC0		13	/* SCC (Z85C30) serial #0 */
+#define DEC_IRQ_SCC1		14	/* SCC (Z85C30) serial #1 */
+#define DEC_IRQ_SII		15	/* SII (DC7061) SCSI */
+#define DEC_IRQ_TC0		16	/* TURBOchannel slot #0 */
+#define DEC_IRQ_TC1		17	/* TURBOchannel slot #1 */
+#define DEC_IRQ_TC2		18	/* TURBOchannel slot #2 */
+#define DEC_IRQ_TIMER		19	/* ARC periodic timer */
+#define DEC_IRQ_VIDEO		20	/* framebuffer */
+
+/* I/O ASIC DMA interrupts */
+#define DEC_IRQ_ASC_MERR	21	/* ASC memory read error */
+#define DEC_IRQ_ASC_ERR		22	/* ASC page overrun */
+#define DEC_IRQ_ASC_DMA		23	/* ASC buffer pointer loaded */
+#define DEC_IRQ_FLOPPY_ERR	24	/* FDC error */
+#define DEC_IRQ_ISDN_ERR	25	/* ISDN memory read/overrun error */
+#define DEC_IRQ_ISDN_RXDMA	26	/* ISDN recv buffer pointer loaded */
+#define DEC_IRQ_ISDN_TXDMA	27	/* ISDN xmit buffer pointer loaded */
+#define DEC_IRQ_LANCE_MERR	28	/* LANCE memory read error */
+#define DEC_IRQ_SCC0A_RXERR	29	/* SCC0A (printer) receive overrun */
+#define DEC_IRQ_SCC0A_RXDMA	30	/* SCC0A receive half page */
+#define DEC_IRQ_SCC0A_TXERR	31	/* SCC0A xmit memory read/overrun */
+#define DEC_IRQ_SCC0A_TXDMA	32	/* SCC0A transmit page end */
+#define DEC_IRQ_AB_RXERR	33	/* ACCESS.bus receive overrun */
+#define DEC_IRQ_AB_RXDMA	34	/* ACCESS.bus receive half page */
+#define DEC_IRQ_AB_TXERR	35	/* ACCESS.bus xmit memory read/ovrn */
+#define DEC_IRQ_AB_TXDMA	36	/* ACCESS.bus transmit page end */
+#define DEC_IRQ_SCC1A_RXERR	37	/* SCC1A (modem) receive overrun */
+#define DEC_IRQ_SCC1A_RXDMA	38	/* SCC1A receive half page */
+#define DEC_IRQ_SCC1A_TXERR	39	/* SCC1A xmit memory read/overrun */
+#define DEC_IRQ_SCC1A_TXDMA	40	/* SCC1A transmit page end */
+
+/* TC5 & TC6 are virtual slots for KN02's onboard devices */
+#define DEC_IRQ_TC5		DEC_IRQ_ASC	/* virtual PMAZ-AA */
+#define DEC_IRQ_TC6		DEC_IRQ_LANCE	/* virtual PMAD-AA */
+
+#define DEC_NR_INTS		41
+
+
+/* Largest of cpu mask_nr tables. */
+#define DEC_MAX_CPU_INTS	6
+/* Largest of asic mask_nr tables. */
+#define DEC_MAX_ASIC_INTS	9
+
+
+/*
+ * CPU interrupt bits common to all systems.
+ */
+#define DEC_CPU_INR_FPU		7	/* R3k FPU */
+#define DEC_CPU_INR_SW1		1	/* software #1 */
+#define DEC_CPU_INR_SW0		0	/* software #0 */
+
+#define DEC_CPU_IRQ_BASE	MIPS_CPU_IRQ_BASE	/* first IRQ assigned to CPU */
+
+#define DEC_CPU_IRQ_NR(n)	((n) + DEC_CPU_IRQ_BASE)
+#define DEC_CPU_IRQ_MASK(n)	(1 << ((n) + CAUSEB_IP))
+#define DEC_CPU_IRQ_ALL		(0xff << CAUSEB_IP)
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Interrupt table structures to hide differences between systems.
+ */
+typedef union { int i; void *p; } int_ptr;
+extern int dec_interrupt[DEC_NR_INTS];
+extern int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2];
+extern int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2];
+extern int cpu_fpu_mask;
+
+
+/*
+ * Common interrupt routine prototypes for all DECStations
+ */
+extern void kn02_io_int(void);
+extern void kn02xa_io_int(void);
+extern void kn03_io_int(void);
+extern void asic_dma_int(void);
+extern void asic_all_int(void);
+extern void kn02_all_int(void);
+extern void cpu_all_int(void);
+
+extern void dec_intr_unimplemented(void);
+extern void asic_intr_unimplemented(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/dec/ioasic.h b/arch/mips/include/asm/dec/ioasic.h
new file mode 100644
index 0000000..98badd6
--- /dev/null
+++ b/arch/mips/include/asm/dec/ioasic.h
@@ -0,0 +1,38 @@
+/*
+ *	include/asm-mips/dec/ioasic.h
+ *
+ *	DEC I/O ASIC access operations.
+ *
+ *	Copyright (C) 2000, 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_DEC_IOASIC_H
+#define __ASM_DEC_IOASIC_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+extern spinlock_t ioasic_ssr_lock;
+
+extern volatile u32 *ioasic_base;
+
+static inline void ioasic_write(unsigned int reg, u32 v)
+{
+	ioasic_base[reg / 4] = v;
+}
+
+static inline u32 ioasic_read(unsigned int reg)
+{
+	return ioasic_base[reg / 4];
+}
+
+extern void init_ioasic_irqs(int base);
+
+extern void dec_ioasic_clocksource_init(void);
+
+#endif /* __ASM_DEC_IOASIC_H */
diff --git a/arch/mips/include/asm/dec/ioasic_addrs.h b/arch/mips/include/asm/dec/ioasic_addrs.h
new file mode 100644
index 0000000..4cbc1f8
--- /dev/null
+++ b/arch/mips/include/asm/dec/ioasic_addrs.h
@@ -0,0 +1,152 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Definitions for the address map in the JUNKIO Asic
+ *
+ * Created with Information from:
+ *
+ * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual"
+ *
+ * and the Mach Sources
+ *
+ * Copyright (C) 199x  the Anonymous
+ * Copyright (C) 2002, 2003  Maciej W. Rozycki
+ */
+
+#ifndef __ASM_MIPS_DEC_IOASIC_ADDRS_H
+#define __ASM_MIPS_DEC_IOASIC_ADDRS_H
+
+#define IOASIC_SLOT_SIZE 0x00040000
+
+/*
+ * Address ranges decoded by the I/O ASIC for onboard devices.
+ */
+#define IOASIC_SYS_ROM	(0*IOASIC_SLOT_SIZE)	/* system board ROM */
+#define IOASIC_IOCTL	(1*IOASIC_SLOT_SIZE)	/* I/O ASIC */
+#define IOASIC_ESAR 	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
+#define IOASIC_LANCE 	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
+#define IOASIC_SCC0 	(4*IOASIC_SLOT_SIZE)	/* SCC #0 */
+#define IOASIC_VDAC_HI	(5*IOASIC_SLOT_SIZE)	/* VDAC (maxine) */
+#define IOASIC_SCC1 	(6*IOASIC_SLOT_SIZE)	/* SCC #1 (3min, 3max+) */
+#define IOASIC_VDAC_LO	(7*IOASIC_SLOT_SIZE)	/* VDAC (maxine) */
+#define IOASIC_TOY 	(8*IOASIC_SLOT_SIZE)	/* RTC */
+#define IOASIC_ISDN 	(9*IOASIC_SLOT_SIZE)	/* ISDN (maxine) */
+#define IOASIC_ERRADDR	(9*IOASIC_SLOT_SIZE)	/* bus error address (3max+) */
+#define IOASIC_CHKSYN 	(10*IOASIC_SLOT_SIZE)	/* ECC syndrome (3max+) */
+#define IOASIC_ACC_BUS	(10*IOASIC_SLOT_SIZE)	/* ACCESS.bus (maxine) */
+#define IOASIC_MCR 	(11*IOASIC_SLOT_SIZE)	/* memory control (3max+) */
+#define IOASIC_FLOPPY 	(11*IOASIC_SLOT_SIZE)	/* FDC (maxine) */
+#define IOASIC_SCSI 	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
+#define IOASIC_FDC_DMA	(13*IOASIC_SLOT_SIZE)	/* FDC DMA (maxine) */
+#define IOASIC_SCSI_DMA	(14*IOASIC_SLOT_SIZE)	/* ??? */
+#define IOASIC_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
+
+
+/*
+ * Offsets for I/O ASIC registers
+ * (relative to (dec_kn_slot_base + IOASIC_IOCTL)).
+ */
+					/* all systems */
+#define IO_REG_SCSI_DMA_P	0x00	/* SCSI DMA Pointer */
+#define IO_REG_SCSI_DMA_BP	0x10	/* SCSI DMA Buffer Pointer */
+#define IO_REG_LANCE_DMA_P	0x20	/* LANCE DMA Pointer */
+#define IO_REG_SCC0A_T_DMA_P	0x30	/* SCC0A Transmit DMA Pointer */
+#define IO_REG_SCC0A_R_DMA_P	0x40	/* SCC0A Receive DMA Pointer */
+
+					/* except Maxine */
+#define IO_REG_SCC1A_T_DMA_P	0x50	/* SCC1A Transmit DMA Pointer */
+#define IO_REG_SCC1A_R_DMA_P	0x60	/* SCC1A Receive DMA Pointer */
+
+					/* Maxine */
+#define IO_REG_AB_T_DMA_P	0x50	/* ACCESS.bus Transmit DMA Pointer */
+#define IO_REG_AB_R_DMA_P	0x60	/* ACCESS.bus Receive DMA Pointer */
+#define IO_REG_FLOPPY_DMA_P	0x70	/* Floppy DMA Pointer */
+#define IO_REG_ISDN_T_DMA_P	0x80	/* ISDN Transmit DMA Pointer */
+#define IO_REG_ISDN_T_DMA_BP	0x90	/* ISDN Transmit DMA Buffer Pointer */
+#define IO_REG_ISDN_R_DMA_P	0xa0	/* ISDN Receive DMA Pointer */
+#define IO_REG_ISDN_R_DMA_BP	0xb0	/* ISDN Receive DMA Buffer Pointer */
+
+					/* all systems */
+#define IO_REG_DATA_0		0xc0	/* System Data Buffer 0 */
+#define IO_REG_DATA_1		0xd0	/* System Data Buffer 1 */
+#define IO_REG_DATA_2		0xe0	/* System Data Buffer 2 */
+#define IO_REG_DATA_3		0xf0	/* System Data Buffer 3 */
+
+					/* all systems */
+#define IO_REG_SSR		0x100	/* System Support Register */
+#define IO_REG_SIR		0x110	/* System Interrupt Register */
+#define IO_REG_SIMR		0x120	/* System Interrupt Mask Reg. */
+#define IO_REG_SAR		0x130	/* System Address Register */
+
+					/* Maxine */
+#define IO_REG_ISDN_T_DATA	0x140	/* ISDN Xmit Data Register */
+#define IO_REG_ISDN_R_DATA	0x150	/* ISDN Receive Data Register */
+
+					/* all systems */
+#define IO_REG_LANCE_SLOT	0x160	/* LANCE I/O Slot Register */
+#define IO_REG_SCSI_SLOT	0x170	/* SCSI Slot Register */
+#define IO_REG_SCC0A_SLOT	0x180	/* SCC0A DMA Slot Register */
+
+					/* except Maxine */
+#define IO_REG_SCC1A_SLOT	0x190	/* SCC1A DMA Slot Register */
+
+					/* Maxine */
+#define IO_REG_AB_SLOT		0x190	/* ACCESS.bus DMA Slot Register */
+#define IO_REG_FLOPPY_SLOT	0x1a0	/* Floppy Slot Register */
+
+					/* all systems */
+#define IO_REG_SCSI_SCR		0x1b0	/* SCSI Partial-Word DMA Control */
+#define IO_REG_SCSI_SDR0	0x1c0	/* SCSI DMA Partial Word 0 */
+#define IO_REG_SCSI_SDR1	0x1d0	/* SCSI DMA Partial Word 1 */
+#define IO_REG_FCTR		0x1e0	/* Free-Running Counter */
+#define IO_REG_RES_31		0x1f0	/* unused */
+
+
+/*
+ * The upper 16 bits of the System Support Register are a part of the
+ * I/O ASIC's internal DMA engine and thus are common to all I/O ASIC
+ * machines.  The exception is the Maxine, which makes use of the
+ * FLOPPY and ISDN bits (otherwise unused) and has a different SCC
+ * wiring.
+ */
+						/* all systems */
+#define IO_SSR_SCC0A_TX_DMA_EN	(1<<31)		/* SCC0A transmit DMA enable */
+#define IO_SSR_SCC0A_RX_DMA_EN	(1<<30)		/* SCC0A receive DMA enable */
+#define IO_SSR_RES_27		(1<<27)		/* unused */
+#define IO_SSR_RES_26		(1<<26)		/* unused */
+#define IO_SSR_RES_25		(1<<25)		/* unused */
+#define IO_SSR_RES_24		(1<<24)		/* unused */
+#define IO_SSR_RES_23		(1<<23)		/* unused */
+#define IO_SSR_SCSI_DMA_DIR	(1<<18)		/* SCSI DMA direction */
+#define IO_SSR_SCSI_DMA_EN	(1<<17)		/* SCSI DMA enable */
+#define IO_SSR_LANCE_DMA_EN	(1<<16)		/* LANCE DMA enable */
+
+						/* except Maxine */
+#define IO_SSR_SCC1A_TX_DMA_EN	(1<<29)		/* SCC1A transmit DMA enable */
+#define IO_SSR_SCC1A_RX_DMA_EN	(1<<28)		/* SCC1A receive DMA enable */
+#define IO_SSR_RES_22		(1<<22)		/* unused */
+#define IO_SSR_RES_21		(1<<21)		/* unused */
+#define IO_SSR_RES_20		(1<<20)		/* unused */
+#define IO_SSR_RES_19		(1<<19)		/* unused */
+
+						/* Maxine */
+#define IO_SSR_AB_TX_DMA_EN	(1<<29)		/* ACCESS.bus xmit DMA enable */
+#define IO_SSR_AB_RX_DMA_EN	(1<<28)		/* ACCESS.bus recv DMA enable */
+#define IO_SSR_FLOPPY_DMA_DIR	(1<<22)		/* Floppy DMA direction */
+#define IO_SSR_FLOPPY_DMA_EN	(1<<21)		/* Floppy DMA enable */
+#define IO_SSR_ISDN_TX_DMA_EN	(1<<20)		/* ISDN transmit DMA enable */
+#define IO_SSR_ISDN_RX_DMA_EN	(1<<19)		/* ISDN receive DMA enable */
+
+/*
+ * The lower 16 bits are system-specific.  Bits 15,11:8 are common and
+ * defined here.  The rest is defined in system-specific headers.
+ */
+#define KN0X_IO_SSR_DIAGDN	(1<<15)		/* diagnostic jumper */
+#define KN0X_IO_SSR_SCC_RST	(1<<11)		/* ~SCC0,1 (Z85C30) reset */
+#define KN0X_IO_SSR_RTC_RST	(1<<10)		/* ~RTC (DS1287) reset */
+#define KN0X_IO_SSR_ASC_RST	(1<<9)		/* ~ASC (NCR53C94) reset */
+#define KN0X_IO_SSR_LANCE_RST	(1<<8)		/* ~LANCE (Am7990) reset */
+
+#endif /* __ASM_MIPS_DEC_IOASIC_ADDRS_H */
diff --git a/arch/mips/include/asm/dec/ioasic_ints.h b/arch/mips/include/asm/dec/ioasic_ints.h
new file mode 100644
index 0000000..9aaa986
--- /dev/null
+++ b/arch/mips/include/asm/dec/ioasic_ints.h
@@ -0,0 +1,74 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Definitions for the interrupt related bits in the I/O ASIC
+ * interrupt status register (and the interrupt mask register, of course)
+ *
+ * Created with Information from:
+ *
+ * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual"
+ *
+ * and the Mach Sources
+ *
+ * Copyright (C) 199x  the Anonymous
+ * Copyright (C) 2002  Maciej W. Rozycki
+ */
+
+#ifndef __ASM_DEC_IOASIC_INTS_H
+#define __ASM_DEC_IOASIC_INTS_H
+
+/*
+ * The upper 16 bits are a part of the I/O ASIC's internal DMA engine
+ * and thus are common to all I/O ASIC machines.  The exception is
+ * the Maxine, which makes use of the FLOPPY and ISDN bits (otherwise
+ * unused) and has a different SCC wiring.
+ */
+					/* all systems */
+#define IO_INR_SCC0A_TXDMA	31	/* SCC0A transmit page end */
+#define IO_INR_SCC0A_TXERR	30	/* SCC0A transmit memory read error */
+#define IO_INR_SCC0A_RXDMA	29	/* SCC0A receive half page */
+#define IO_INR_SCC0A_RXERR	28	/* SCC0A receive overrun */
+#define IO_INR_ASC_DMA		19	/* ASC buffer pointer loaded */
+#define IO_INR_ASC_ERR		18	/* ASC page overrun */
+#define IO_INR_ASC_MERR		17	/* ASC memory read error */
+#define IO_INR_LANCE_MERR	16	/* LANCE memory read error */
+
+					/* except Maxine */
+#define IO_INR_SCC1A_TXDMA	27	/* SCC1A transmit page end */
+#define IO_INR_SCC1A_TXERR	26	/* SCC1A transmit memory read error */
+#define IO_INR_SCC1A_RXDMA	25	/* SCC1A receive half page */
+#define IO_INR_SCC1A_RXERR	24	/* SCC1A receive overrun */
+#define IO_INR_RES_23		23	/* unused */
+#define IO_INR_RES_22		22	/* unused */
+#define IO_INR_RES_21		21	/* unused */
+#define IO_INR_RES_20		20	/* unused */
+
+					/* Maxine */
+#define IO_INR_AB_TXDMA		27	/* ACCESS.bus transmit page end */
+#define IO_INR_AB_TXERR		26	/* ACCESS.bus xmit memory read error */
+#define IO_INR_AB_RXDMA		25	/* ACCESS.bus receive half page */
+#define IO_INR_AB_RXERR		24	/* ACCESS.bus receive overrun */
+#define IO_INR_FLOPPY_ERR	23	/* FDC error */
+#define IO_INR_ISDN_TXDMA	22	/* ISDN xmit buffer pointer loaded */
+#define IO_INR_ISDN_RXDMA	21	/* ISDN recv buffer pointer loaded */
+#define IO_INR_ISDN_ERR		20	/* ISDN memory read/overrun error */
+
+#define IO_INR_DMA		16	/* first DMA IRQ */
+
+/*
+ * The lower 16 bits are system-specific and thus defined in
+ * system-specific headers.
+ */
+
+
+#define IO_IRQ_BASE		8	/* first IRQ assigned to I/O ASIC */
+#define IO_IRQ_LINES		32	/* number of I/O ASIC interrupts */
+
+#define IO_IRQ_NR(n)		((n) + IO_IRQ_BASE)
+#define IO_IRQ_MASK(n)		(1 << (n))
+#define IO_IRQ_ALL		0x0000ffff
+#define IO_IRQ_DMA		0xffff0000
+
+#endif /* __ASM_DEC_IOASIC_INTS_H */
diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h
new file mode 100644
index 0000000..28fa717
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn01.h
@@ -0,0 +1,90 @@
+/*
+ * Hardware info about DECstation DS2100/3100 systems (otherwise known as
+ * pmin/pmax or KN01).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2002, 2003, 2005  Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN01_H
+#define __ASM_MIPS_DEC_KN01_H
+
+#define KN01_SLOT_BASE	0x10000000
+#define KN01_SLOT_SIZE	0x01000000
+
+/*
+ * Address ranges for devices.
+ */
+#define KN01_PMASK	(0*KN01_SLOT_SIZE)	/* color plane mask */
+#define KN01_PCC	(1*KN01_SLOT_SIZE)	/* PCC (DC503) cursor */
+#define KN01_VDAC	(2*KN01_SLOT_SIZE)	/* color map */
+#define KN01_RES_3	(3*KN01_SLOT_SIZE)	/* unused */
+#define KN01_RES_4	(4*KN01_SLOT_SIZE)	/* unused */
+#define KN01_RES_5	(5*KN01_SLOT_SIZE)	/* unused */
+#define KN01_RES_6	(6*KN01_SLOT_SIZE)	/* unused */
+#define KN01_ERRADDR	(7*KN01_SLOT_SIZE)	/* write error address */
+#define KN01_LANCE	(8*KN01_SLOT_SIZE)	/* LANCE (Am7990) Ethernet */
+#define KN01_LANCE_MEM	(9*KN01_SLOT_SIZE)	/* LANCE buffer memory */
+#define KN01_SII	(10*KN01_SLOT_SIZE)	/* SII (DC7061) SCSI */
+#define KN01_SII_MEM	(11*KN01_SLOT_SIZE)	/* SII buffer memory */
+#define KN01_DZ11	(12*KN01_SLOT_SIZE)	/* DZ11 (DC7085) serial */
+#define KN01_RTC	(13*KN01_SLOT_SIZE)	/* DS1287 RTC (bytes #0) */
+#define KN01_ESAR	(13*KN01_SLOT_SIZE)	/* MAC address (bytes #1) */
+#define KN01_CSR	(14*KN01_SLOT_SIZE)	/* system ctrl & status reg */
+#define KN01_SYS_ROM	(15*KN01_SLOT_SIZE)	/* system board ROM */
+
+
+/*
+ * Frame buffer memory address.
+ */
+#define KN01_VFB_MEM	0x0fc00000
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN01_CPU_INR_BUS	6	/* memory, I/O bus read/write errors */
+#define KN01_CPU_INR_VIDEO	6	/* PCC area detect #2 */
+#define KN01_CPU_INR_RTC	5	/* DS1287 RTC */
+#define KN01_CPU_INR_DZ11	4	/* DZ11 (DC7085) serial */
+#define KN01_CPU_INR_LANCE	3	/* LANCE (Am7990) Ethernet */
+#define KN01_CPU_INR_SII	2	/* SII (DC7061) SCSI */
+
+
+/*
+ * System Control & Status Register bits.
+ */
+#define KN01_CSR_MNFMOD		(1<<15)	/* MNFMOD manufacturing jumper */
+#define KN01_CSR_STATUS		(1<<14)	/* self-test result status output */
+#define KN01_CSR_PARDIS		(1<<13)	/* parity error disable */
+#define KN01_CSR_CRSRTST	(1<<12)	/* PCC test output */
+#define KN01_CSR_MONO		(1<<11)	/* mono/color fb SIMM installed */
+#define KN01_CSR_MEMERR		(1<<10)	/* write timeout error status & ack*/
+#define KN01_CSR_VINT		(1<<9)	/* PCC area detect #2 status & ack */
+#define KN01_CSR_TXDIS		(1<<8)	/* DZ11 transmit disable */
+#define KN01_CSR_VBGTRG		(1<<2)	/* blue DAC voltage over green (r/o) */
+#define KN01_CSR_VRGTRG		(1<<1)	/* red DAC voltage over green (r/o) */
+#define KN01_CSR_VRGTRB		(1<<0)	/* red DAC voltage over blue (r/o) */
+#define KN01_CSR_LEDS		(0xff<<0) /* ~diagnostic LEDs (w/o) */
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+extern u16 cached_kn01_csr;
+extern spinlock_t kn01_lock;
+
+extern void dec_kn01_be_init(void);
+extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN01_H */
diff --git a/arch/mips/include/asm/dec/kn02.h b/arch/mips/include/asm/dec/kn02.h
new file mode 100644
index 0000000..93430b5
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02.h
@@ -0,0 +1,91 @@
+/*
+ * Hardware info about DECstation 5000/200 systems (otherwise known as
+ * 3max or KN02).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2002, 2003, 2005  Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN02_H
+#define __ASM_MIPS_DEC_KN02_H
+
+#define KN02_SLOT_BASE	0x1fc00000
+#define KN02_SLOT_SIZE	0x00080000
+
+/*
+ * Address ranges decoded by the "system slot" logic for onboard devices.
+ */
+#define KN02_SYS_ROM	(0*KN02_SLOT_SIZE)	/* system board ROM */
+#define KN02_RES_1	(1*KN02_SLOT_SIZE)	/* unused */
+#define KN02_CHKSYN	(2*KN02_SLOT_SIZE)	/* ECC syndrome */
+#define KN02_ERRADDR	(3*KN02_SLOT_SIZE)	/* bus error address */
+#define KN02_DZ11	(4*KN02_SLOT_SIZE)	/* DZ11 (DC7085) serial */
+#define KN02_RTC	(5*KN02_SLOT_SIZE)	/* DS1287 RTC */
+#define KN02_CSR	(6*KN02_SLOT_SIZE)	/* system ctrl & status reg */
+#define KN02_SYS_ROM_7	(7*KN02_SLOT_SIZE)	/* system board ROM (alias) */
+
+
+/*
+ * System Control & Status Register bits.
+ */
+#define KN02_CSR_RES_28		(0xf<<28)	/* unused */
+#define KN02_CSR_PSU		(1<<27)		/* power supply unit warning */
+#define KN02_CSR_NVRAM		(1<<26)		/* ~NVRAM clear jumper */
+#define KN02_CSR_REFEVEN	(1<<25)		/* mem refresh bank toggle */
+#define KN02_CSR_NRMOD		(1<<24)		/* ~NRMOD manufact. jumper */
+#define KN02_CSR_IOINTEN	(0xff<<16)	/* IRQ mask bits */
+#define KN02_CSR_DIAGCHK	(1<<15)		/* diagn/norml ECC reads */
+#define KN02_CSR_DIAGGEN	(1<<14)		/* diagn/norml ECC writes */
+#define KN02_CSR_CORRECT	(1<<13)		/* ECC correct/check */
+#define KN02_CSR_LEDIAG		(1<<12)		/* ECC diagn. latch strobe */
+#define KN02_CSR_TXDIS		(1<<11)		/* DZ11 transmit disable */
+#define KN02_CSR_BNK32M		(1<<10)		/* 32M/8M stride */
+#define KN02_CSR_DIAGDN		(1<<9)		/* DIAGDN manufact. jumper */
+#define KN02_CSR_BAUD38		(1<<8)		/* DZ11 38/19kbps ext. rate */
+#define KN02_CSR_IOINT		(0xff<<0)	/* IRQ status bits (r/o) */
+#define KN02_CSR_LEDS		(0xff<<0)	/* ~diagnostic LEDs (w/o) */
+
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02_CPU_INR_RES_6	6	/* unused */
+#define KN02_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
+#define KN02_CPU_INR_RES_4	4	/* unused */
+#define KN02_CPU_INR_RTC	3	/* DS1287 RTC */
+#define KN02_CPU_INR_CASCADE	2	/* CSR cascade */
+
+/*
+ * CSR interrupt bits.
+ */
+#define KN02_CSR_INR_DZ11	7	/* DZ11 (DC7085) serial */
+#define KN02_CSR_INR_LANCE	6	/* LANCE (Am7990) Ethernet */
+#define KN02_CSR_INR_ASC	5	/* ASC (NCR53C94) SCSI */
+#define KN02_CSR_INR_RES_4	4	/* unused */
+#define KN02_CSR_INR_RES_3	3	/* unused */
+#define KN02_CSR_INR_TC2	2	/* TURBOchannel slot #2 */
+#define KN02_CSR_INR_TC1	1	/* TURBOchannel slot #1 */
+#define KN02_CSR_INR_TC0	0	/* TURBOchannel slot #0 */
+
+
+#define KN02_IRQ_BASE		8	/* first IRQ assigned to CSR */
+#define KN02_IRQ_LINES		8	/* number of CSR interrupts */
+
+#define KN02_IRQ_NR(n)		((n) + KN02_IRQ_BASE)
+#define KN02_IRQ_MASK(n)	(1 << (n))
+#define KN02_IRQ_ALL		0xff
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+extern u32 cached_kn02_csr;
+extern void init_kn02_irqs(int base);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN02_H */
diff --git a/arch/mips/include/asm/dec/kn02ba.h b/arch/mips/include/asm/dec/kn02ba.h
new file mode 100644
index 0000000..c957a4f
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02ba.h
@@ -0,0 +1,67 @@
+/*
+ *	include/asm-mips/dec/kn02ba.h
+ *
+ *	DECstation 5000/1xx (3min or KN02-BA) definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN02BA_H
+#define __ASM_MIPS_DEC_KN02BA_H
+
+#include <asm/dec/kn02xa.h>		/* For common definitions. */
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02BA_CPU_INR_HALT	6	/* HALT button */
+#define KN02BA_CPU_INR_CASCADE	5	/* I/O ASIC cascade */
+#define KN02BA_CPU_INR_TC2	4	/* TURBOchannel slot #2 */
+#define KN02BA_CPU_INR_TC1	3	/* TURBOchannel slot #1 */
+#define KN02BA_CPU_INR_TC0	2	/* TURBOchannel slot #0 */
+
+/*
+ * I/O ASIC interrupt bits.  Star marks denote non-IRQ status bits.
+ */
+#define KN02BA_IO_INR_RES_15	15	/* unused */
+#define KN02BA_IO_INR_NVRAM	14	/* (*) NVRAM clear jumper */
+#define KN02BA_IO_INR_RES_13	13	/* unused */
+#define KN02BA_IO_INR_BUS	12	/* memory, I/O bus read/write errors */
+#define KN02BA_IO_INR_RES_11	11	/* unused */
+#define KN02BA_IO_INR_NRMOD	10	/* (*) NRMOD manufacturing jumper */
+#define KN02BA_IO_INR_ASC	9	/* ASC (NCR53C94) SCSI */
+#define KN02BA_IO_INR_LANCE	8	/* LANCE (Am7990) Ethernet */
+#define KN02BA_IO_INR_SCC1	7	/* SCC (Z85C30) serial #1 */
+#define KN02BA_IO_INR_SCC0	6	/* SCC (Z85C30) serial #0 */
+#define KN02BA_IO_INR_RTC	5	/* DS1287 RTC */
+#define KN02BA_IO_INR_PSU	4	/* power supply unit warning */
+#define KN02BA_IO_INR_RES_3	3	/* unused */
+#define KN02BA_IO_INR_ASC_DATA	2	/* SCSI data ready (for PIO) */
+#define KN02BA_IO_INR_PBNC	1	/* ~HALT button debouncer */
+#define KN02BA_IO_INR_PBNO	0	/* HALT button debouncer */
+
+
+/*
+ * Memory Error Register bits.
+ */
+#define KN02BA_MER_RES_27	(1<<27)		/* unused */
+
+/*
+ * Memory Size Register bits.
+ */
+#define KN02BA_MSR_RES_17	(0x3ff<<17)	/* unused */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN02BA_IO_SSR_TXDIS1	(1<<14)		/* SCC1 transmit disable */
+#define KN02BA_IO_SSR_TXDIS0	(1<<13)		/* SCC0 transmit disable */
+#define KN02BA_IO_SSR_RES_12	(1<<12)		/* unused */
+
+#define KN02BA_IO_SSR_LEDS	(0xff<<0)	/* ~diagnostic LEDs */
+
+#endif /* __ASM_MIPS_DEC_KN02BA_H */
diff --git a/arch/mips/include/asm/dec/kn02ca.h b/arch/mips/include/asm/dec/kn02ca.h
new file mode 100644
index 0000000..92c0fe2
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02ca.h
@@ -0,0 +1,79 @@
+/*
+ *	include/asm-mips/dec/kn02ca.h
+ *
+ *	Personal DECstation 5000/xx (Maxine or KN02-CA) definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN02CA_H
+#define __ASM_MIPS_DEC_KN02CA_H
+
+#include <asm/dec/kn02xa.h>		/* For common definitions. */
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02CA_CPU_INR_HALT	6	/* HALT from ACCESS.Bus */
+#define KN02CA_CPU_INR_CASCADE	5	/* I/O ASIC cascade */
+#define KN02CA_CPU_INR_BUS	4	/* memory, I/O bus read/write errors */
+#define KN02CA_CPU_INR_RTC	3	/* DS1287 RTC */
+#define KN02CA_CPU_INR_TIMER	2	/* ARC periodic timer */
+
+/*
+ * I/O ASIC interrupt bits.  Star marks denote non-IRQ status bits.
+ */
+#define KN02CA_IO_INR_FLOPPY	15	/* 82077 FDC */
+#define KN02CA_IO_INR_NVRAM	14	/* (*) NVRAM clear jumper */
+#define KN02CA_IO_INR_POWERON	13	/* (*) ACCESS.Bus/power-on reset */
+#define KN02CA_IO_INR_TC0	12	/* TURBOchannel slot #0 */
+#define KN02CA_IO_INR_TIMER	12	/* ARC periodic timer (?) */
+#define KN02CA_IO_INR_ISDN	11	/* Am79C30A ISDN */
+#define KN02CA_IO_INR_NRMOD	10	/* (*) NRMOD manufacturing jumper */
+#define KN02CA_IO_INR_ASC	9	/* ASC (NCR53C94) SCSI */
+#define KN02CA_IO_INR_LANCE	8	/* LANCE (Am7990) Ethernet */
+#define KN02CA_IO_INR_HDFLOPPY	7	/* (*) HD (1.44MB) floppy status */
+#define KN02CA_IO_INR_SCC0	6	/* SCC (Z85C30) serial #0 */
+#define KN02CA_IO_INR_TC1	5	/* TURBOchannel slot #1 */
+#define KN02CA_IO_INR_XDFLOPPY	4	/* (*) XD (2.88MB) floppy status */
+#define KN02CA_IO_INR_VIDEO	3	/* framebuffer */
+#define KN02CA_IO_INR_XVIDEO	2	/* ~framebuffer */
+#define KN02CA_IO_INR_AB_XMIT	1	/* ACCESS.bus transmit */
+#define KN02CA_IO_INR_AB_RECV	0	/* ACCESS.bus receive */
+
+
+/*
+ * Memory Error Register bits.
+ */
+#define KN02CA_MER_INTR		(1<<27)		/* ARC IRQ status & ack */
+
+/*
+ * Memory Size Register bits.
+ */
+#define KN02CA_MSR_INTREN	(1<<26)		/* ARC periodic IRQ enable */
+#define KN02CA_MSR_MS10EN	(1<<25)		/* 10/1ms IRQ period select */
+#define KN02CA_MSR_PFORCE	(0xf<<21)	/* byte lane error force */
+#define KN02CA_MSR_MABEN	(1<<20)		/* A side VFB address enable */
+#define KN02CA_MSR_LASTBANK	(0x7<<17)	/* onboard RAM bank # */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN03CA_IO_SSR_RES_14	(1<<14)		/* unused */
+#define KN03CA_IO_SSR_RES_13	(1<<13)		/* unused */
+#define KN03CA_IO_SSR_ISDN_RST	(1<<12)		/* ~ISDN (Am79C30A) reset */
+
+#define KN03CA_IO_SSR_FLOPPY_RST (1<<7)		/* ~FDC (82077) reset */
+#define KN03CA_IO_SSR_VIDEO_RST	(1<<6)		/* ~framebuffer reset */
+#define KN03CA_IO_SSR_AB_RST	(1<<5)		/* ACCESS.bus reset */
+#define KN03CA_IO_SSR_RES_4	(1<<4)		/* unused */
+#define KN03CA_IO_SSR_RES_3	(1<<4)		/* unused */
+#define KN03CA_IO_SSR_RES_2	(1<<2)		/* unused */
+#define KN03CA_IO_SSR_RES_1	(1<<1)		/* unused */
+#define KN03CA_IO_SSR_LED	(1<<0)		/* power LED */
+
+#endif /* __ASM_MIPS_DEC_KN02CA_H */
diff --git a/arch/mips/include/asm/dec/kn02xa.h b/arch/mips/include/asm/dec/kn02xa.h
new file mode 100644
index 0000000..b56b457
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02xa.h
@@ -0,0 +1,84 @@
+/*
+ * Hardware info common to DECstation 5000/1xx systems (otherwise
+ * known as 3min or kn02ba) and Personal DECstations 5000/xx ones
+ * (otherwise known as maxine or kn02ca).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2000, 2002, 2003, 2005  Maciej W. Rozycki
+ *
+ * These are addresses which have to be known early in the boot process.
+ * For other addresses refer to tc.h, ioasic_addrs.h and friends.
+ */
+#ifndef __ASM_MIPS_DEC_KN02XA_H
+#define __ASM_MIPS_DEC_KN02XA_H
+
+#include <asm/dec/ioasic_addrs.h>
+
+#define KN02XA_SLOT_BASE	0x1c000000
+
+/*
+ * Memory control ASIC registers.
+ */
+#define KN02XA_MER		0x0c400000	/* memory error register */
+#define KN02XA_MSR		0x0c800000	/* memory size register */
+
+/*
+ * CPU control ASIC registers.
+ */
+#define KN02XA_MEM_CONF		0x0e000000	/* write timeout config */
+#define KN02XA_EAR		0x0e000004	/* error address register */
+#define KN02XA_BOOT0		0x0e000008	/* boot 0 register */
+#define KN02XA_MEM_INTR		0x0e00000c	/* write err IRQ stat & ack */
+
+/*
+ * Memory Error Register bits, common definitions.
+ * The rest is defined in system-specific headers.
+ */
+#define KN02XA_MER_RES_28	(0xf<<28)	/* unused */
+#define KN02XA_MER_RES_17	(0x3ff<<17)	/* unused */
+#define KN02XA_MER_PAGERR	(1<<16)		/* 2k page boundary error */
+#define KN02XA_MER_TRANSERR	(1<<15)		/* transfer length error */
+#define KN02XA_MER_PARDIS	(1<<14)		/* parity error disable */
+#define KN02XA_MER_SIZE		(1<<13)		/* r/o mirror of MSR_SIZE */
+#define KN02XA_MER_RES_12	(1<<12)		/* unused */
+#define KN02XA_MER_BYTERR	(0xf<<8)	/* byte lane error bitmask: */
+#define KN02XA_MER_BYTERR_3	(0x8<<8)	/* byte lane #3 */
+#define KN02XA_MER_BYTERR_2	(0x4<<8)	/* byte lane #2 */
+#define KN02XA_MER_BYTERR_1	(0x2<<8)	/* byte lane #1 */
+#define KN02XA_MER_BYTERR_0	(0x1<<8)	/* byte lane #0 */
+#define KN02XA_MER_RES_0	(0xff<<0)	/* unused */
+
+/*
+ * Memory Size Register bits, common definitions.
+ * The rest is defined in system-specific headers.
+ */
+#define KN02XA_MSR_RES_27	(0x1f<<27)	/* unused */
+#define KN02XA_MSR_RES_14	(0x7<<14)	/* unused */
+#define KN02XA_MSR_SIZE		(1<<13)		/* 16M/4M stride */
+#define KN02XA_MSR_RES_0	(0x1fff<<0)	/* unused */
+
+/*
+ * Error Address Register bits.
+ */
+#define KN02XA_EAR_RES_29	(0x7<<29)	/* unused */
+#define KN02XA_EAR_ADDRESS	(0x7ffffff<<2)	/* address involved */
+#define KN02XA_EAR_RES_0	(0x3<<0)	/* unused */
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_kn02xa_be_init(void);
+extern int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN02XA_H */
diff --git a/arch/mips/include/asm/dec/kn03.h b/arch/mips/include/asm/dec/kn03.h
new file mode 100644
index 0000000..edede92
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn03.h
@@ -0,0 +1,74 @@
+/*
+ * Hardware info about DECstation 5000/2x0 systems (otherwise known as
+ * 3max+) and DECsystem 5900 systems (otherwise known as bigmax) which
+ * differ mechanically but are otherwise identical (both are known as
+ * KN03).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2000, 2002, 2003, 2005  Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN03_H
+#define __ASM_MIPS_DEC_KN03_H
+
+#include <asm/dec/ecc.h>
+#include <asm/dec/ioasic_addrs.h>
+
+#define KN03_SLOT_BASE		0x1f800000
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN03_CPU_INR_HALT	6	/* HALT button */
+#define KN03_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
+#define KN03_CPU_INR_RES_4	4	/* unused */
+#define KN03_CPU_INR_RTC	3	/* DS1287 RTC */
+#define KN03_CPU_INR_CASCADE	2	/* I/O ASIC cascade */
+
+/*
+ * I/O ASIC interrupt bits.  Star marks denote non-IRQ status bits.
+ */
+#define KN03_IO_INR_3MAXP	15	/* (*) 3max+/bigmax ID */
+#define KN03_IO_INR_NVRAM	14	/* (*) NVRAM clear jumper */
+#define KN03_IO_INR_TC2		13	/* TURBOchannel slot #2 */
+#define KN03_IO_INR_TC1		12	/* TURBOchannel slot #1 */
+#define KN03_IO_INR_TC0		11	/* TURBOchannel slot #0 */
+#define KN03_IO_INR_NRMOD	10	/* (*) NRMOD manufacturing jumper */
+#define KN03_IO_INR_ASC		9	/* ASC (NCR53C94) SCSI */
+#define KN03_IO_INR_LANCE	8	/* LANCE (Am7990) Ethernet */
+#define KN03_IO_INR_SCC1	7	/* SCC (Z85C30) serial #1 */
+#define KN03_IO_INR_SCC0	6	/* SCC (Z85C30) serial #0 */
+#define KN03_IO_INR_RTC		5	/* DS1287 RTC */
+#define KN03_IO_INR_PSU		4	/* power supply unit warning */
+#define KN03_IO_INR_RES_3	3	/* unused */
+#define KN03_IO_INR_ASC_DATA	2	/* SCSI data ready (for PIO) */
+#define KN03_IO_INR_PBNC	1	/* ~HALT button debouncer */
+#define KN03_IO_INR_PBNO	0	/* HALT button debouncer */
+
+
+/*
+ * Memory Control Register bits.
+ */
+#define KN03_MCR_RES_16		(0xffff<<16)	/* unused */
+#define KN03_MCR_DIAGCHK	(1<<15)		/* diagn/norml ECC reads */
+#define KN03_MCR_DIAGGEN	(1<<14)		/* diagn/norml ECC writes */
+#define KN03_MCR_CORRECT	(1<<13)		/* ECC correct/check */
+#define KN03_MCR_RES_11		(0x3<<12)	/* unused */
+#define KN03_MCR_BNK32M		(1<<10)		/* 32M/8M stride */
+#define KN03_MCR_RES_7		(0x7<<7)	/* unused */
+#define KN03_MCR_CHECK		(0x7f<<0)	/* diagnostic check bits */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN03_IO_SSR_TXDIS1	(1<<14)		/* SCC1 transmit disable */
+#define KN03_IO_SSR_TXDIS0	(1<<13)		/* SCC0 transmit disable */
+#define KN03_IO_SSR_RES_12	(1<<12)		/* unused */
+
+#define KN03_IO_SSR_LEDS	(0xff<<0)	/* ~diagnostic LEDs */
+
+#endif /* __ASM_MIPS_DEC_KN03_H */
diff --git a/arch/mips/include/asm/dec/kn05.h b/arch/mips/include/asm/dec/kn05.h
new file mode 100644
index 0000000..56d22dc
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn05.h
@@ -0,0 +1,76 @@
+/*
+ *	include/asm-mips/dec/kn05.h
+ *
+ *	DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min
+ *	or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or
+ *	KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC
+ *	definitions.
+ *
+ *	Copyright (C) 2002, 2003, 2005, 2008  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	WARNING!  All this information is pure guesswork based on the
+ *	ROM.  It is provided here in hope it will give someone some
+ *	food for thought.  No documentation for the KN05 nor the KN04
+ *	module has been located so far.
+ */
+#ifndef __ASM_MIPS_DEC_KN05_H
+#define __ASM_MIPS_DEC_KN05_H
+
+#include <asm/dec/ioasic_addrs.h>
+
+/*
+ * The oncard MB (Memory Buffer) ASIC provides an additional address
+ * decoder.  Certain address ranges within the "high" 16 slots are
+ * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA.
+ * Others are handled locally.  "Low" slots are always passed.
+ */
+#define KN4K_SLOT_BASE	0x1fc00000
+
+#define KN4K_MB_ROM	(0*IOASIC_SLOT_SIZE)	/* KN05/KN04 card ROM */
+#define KN4K_IOCTL	(1*IOASIC_SLOT_SIZE)	/* I/O ASIC */
+#define KN4K_ESAR	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
+#define KN4K_LANCE	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
+#define KN4K_MB_INT	(4*IOASIC_SLOT_SIZE)	/* MB interrupt register */
+#define KN4K_MB_EA	(5*IOASIC_SLOT_SIZE)	/* MB error address? */
+#define KN4K_MB_EC	(6*IOASIC_SLOT_SIZE)	/* MB error ??? */
+#define KN4K_MB_CSR	(7*IOASIC_SLOT_SIZE)	/* MB control & status */
+#define KN4K_RES_08	(8*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_09	(9*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_10	(10*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_11	(11*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_SCSI	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
+#define KN4K_RES_13	(13*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_14	(14*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
+
+/*
+ * Bits for the MB interrupt register.
+ * The register appears read-only.
+ */
+#define KN4K_MB_INT_TC		(1<<0)		/* TURBOchannel? */
+#define KN4K_MB_INT_RTC		(1<<1)		/* RTC? */
+#define KN4K_MB_INT_MT		(1<<3)		/* I/O ASIC cascade */
+
+/*
+ * Bits for the MB control & status register.
+ * Set to 0x00bf8001 for KN05 and to 0x003f8000 for KN04 by the firmware.
+ */
+#define KN4K_MB_CSR_PF		(1<<0)		/* PreFetching enable? */
+#define KN4K_MB_CSR_F		(1<<1)		/* ??? */
+#define KN4K_MB_CSR_ECC		(0xff<<2)	/* ??? */
+#define KN4K_MB_CSR_OD		(1<<10)		/* ??? */
+#define KN4K_MB_CSR_CP		(1<<11)		/* ??? */
+#define KN4K_MB_CSR_UNC		(1<<12)		/* ??? */
+#define KN4K_MB_CSR_IM		(1<<13)		/* ??? */
+#define KN4K_MB_CSR_NC		(1<<14)		/* ??? */
+#define KN4K_MB_CSR_EE		(1<<15)		/* (bus) Exception Enable? */
+#define KN4K_MB_CSR_MSK		(0x1f<<16)	/* CPU Int[4:0] mask */
+#define KN4K_MB_CSR_FW		(1<<21)		/* ??? */
+#define KN4K_MB_CSR_W		(1<<31)		/* ??? */
+
+#endif /* __ASM_MIPS_DEC_KN05_H */
diff --git a/arch/mips/include/asm/dec/kn230.h b/arch/mips/include/asm/dec/kn230.h
new file mode 100644
index 0000000..ff1bf17
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn230.h
@@ -0,0 +1,26 @@
+/*
+ *	include/asm-mips/dec/kn230.h
+ *
+ *	DECsystem 5100 (MIPSmate or KN230) definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN230_H
+#define __ASM_MIPS_DEC_KN230_H
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN230_CPU_INR_HALT	6	/* HALT button */
+#define KN230_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
+#define KN230_CPU_INR_RTC	4	/* DS1287 RTC */
+#define KN230_CPU_INR_SII	3	/* SII (DC7061) SCSI */
+#define KN230_CPU_INR_LANCE	3	/* LANCE (Am7990) Ethernet */
+#define KN230_CPU_INR_DZ11	2	/* DZ11 (DC7085) serial */
+
+#endif /* __ASM_MIPS_DEC_KN230_H */
diff --git a/arch/mips/include/asm/dec/machtype.h b/arch/mips/include/asm/dec/machtype.h
new file mode 100644
index 0000000..a6ecdeb
--- /dev/null
+++ b/arch/mips/include/asm/dec/machtype.h
@@ -0,0 +1,27 @@
+/*
+ * Various machine type macros
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1998, 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_DEC_MACHTYPE_H
+#define __ASM_DEC_MACHTYPE_H
+
+#include <asm/bootinfo.h>
+
+#define TURBOCHANNEL	(mips_machtype == MACH_DS5000_200 || \
+			 mips_machtype == MACH_DS5000_1XX || \
+			 mips_machtype == MACH_DS5000_XX  || \
+			 mips_machtype == MACH_DS5000_2X0 || \
+			 mips_machtype == MACH_DS5900)
+
+#define IOASIC		(mips_machtype == MACH_DS5000_1XX || \
+			 mips_machtype == MACH_DS5000_XX  || \
+			 mips_machtype == MACH_DS5000_2X0 || \
+			 mips_machtype == MACH_DS5900)
+
+#endif
diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h
new file mode 100644
index 0000000..b9c8203
--- /dev/null
+++ b/arch/mips/include/asm/dec/prom.h
@@ -0,0 +1,174 @@
+/*
+ *	include/asm-mips/dec/prom.h
+ *
+ *	DECstation PROM interface.
+ *
+ *	Copyright (C) 2002  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Based on arch/mips/dec/prom/prom.h by the Anonymous.
+ */
+#ifndef _ASM_DEC_PROM_H
+#define _ASM_DEC_PROM_H
+
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+
+/*
+ * PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's.
+ * Many of these will work for MIPSen as well!
+ */
+#define VEC_RESET		(u64 *)CKSEG1ADDR(0x1fc00000)
+							/* Prom base address */
+
+#define PMAX_PROM_ENTRY(x)	(VEC_RESET + (x))	/* Prom jump table */
+
+#define PMAX_PROM_HALT		PMAX_PROM_ENTRY(2)	/* valid on MIPSen */
+#define PMAX_PROM_AUTOBOOT	PMAX_PROM_ENTRY(5)	/* valid on MIPSen */
+#define PMAX_PROM_OPEN		PMAX_PROM_ENTRY(6)
+#define PMAX_PROM_READ		PMAX_PROM_ENTRY(7)
+#define PMAX_PROM_CLOSE		PMAX_PROM_ENTRY(10)
+#define PMAX_PROM_LSEEK		PMAX_PROM_ENTRY(11)
+#define PMAX_PROM_GETCHAR	PMAX_PROM_ENTRY(12)
+#define PMAX_PROM_PUTCHAR	PMAX_PROM_ENTRY(13)	/* 12 on MIPSen */
+#define PMAX_PROM_GETS		PMAX_PROM_ENTRY(15)
+#define PMAX_PROM_PRINTF	PMAX_PROM_ENTRY(17)
+#define PMAX_PROM_GETENV	PMAX_PROM_ENTRY(33)	/* valid on MIPSen */
+
+
+/*
+ * Magic number indicating REX PROM available on DECstation.  Found in
+ * register a2 on transfer of control to program from PROM.
+ */
+#define REX_PROM_MAGIC		0x30464354
+
+#ifdef CONFIG_64BIT
+
+#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.  */
+
+#else /* !CONFIG_64BIT */
+
+#define prom_is_rex(magic)	((magic) == REX_PROM_MAGIC)
+
+#endif /* !CONFIG_64BIT */
+
+
+/*
+ * 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and
+ * DS5000/2x0.
+ */
+#define REX_PROM_GETBITMAP	0x84/4	/* get mem bitmap */
+#define REX_PROM_GETCHAR	0x24/4	/* getch() */
+#define REX_PROM_GETENV		0x64/4	/* get env. variable */
+#define REX_PROM_GETSYSID	0x80/4	/* get system id */
+#define REX_PROM_GETTCINFO	0xa4/4
+#define REX_PROM_PRINTF		0x30/4	/* printf() */
+#define REX_PROM_SLOTADDR	0x6c/4	/* slotaddr */
+#define REX_PROM_BOOTINIT	0x54/4	/* open() */
+#define REX_PROM_BOOTREAD	0x58/4	/* read() */
+#define REX_PROM_CLEARCACHE	0x7c/4
+
+
+/*
+ * Used by rex_getbitmap().
+ */
+typedef struct {
+	int pagesize;
+	unsigned char bitmap[0];
+} memmap;
+
+
+/*
+ * Function pointers as read from a PROM's callback vector.
+ */
+extern int (*__rex_bootinit)(void);
+extern int (*__rex_bootread)(void);
+extern int (*__rex_getbitmap)(memmap *);
+extern unsigned long *(*__rex_slot_address)(int);
+extern void *(*__rex_gettcinfo)(void);
+extern int (*__rex_getsysid)(void);
+extern void (*__rex_clear_cache)(void);
+
+extern int (*__prom_getchar)(void);
+extern char *(*__prom_getenv)(char *);
+extern int (*__prom_printf)(char *, ...);
+
+extern int (*__pmax_open)(char*, int);
+extern int (*__pmax_lseek)(int, long, int);
+extern int (*__pmax_read)(int, void *, int);
+extern int (*__pmax_close)(int);
+
+
+#ifdef CONFIG_64BIT
+
+/*
+ * On MIPS64 we have to call PROM functions via a helper
+ * dispatcher to accomodate ABI incompatibilities.
+ */
+#define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \
+				 __asm__(#fun " = call_o32")
+
+int __DEC_PROM_O32(_rex_bootinit, (int (*)(void)));
+int __DEC_PROM_O32(_rex_bootread, (int (*)(void)));
+int __DEC_PROM_O32(_rex_getbitmap, (int (*)(memmap *), memmap *));
+unsigned long *__DEC_PROM_O32(_rex_slot_address,
+			     (unsigned long *(*)(int), int));
+void *__DEC_PROM_O32(_rex_gettcinfo, (void *(*)(void)));
+int __DEC_PROM_O32(_rex_getsysid, (int (*)(void)));
+void __DEC_PROM_O32(_rex_clear_cache, (void (*)(void)));
+
+int __DEC_PROM_O32(_prom_getchar, (int (*)(void)));
+char *__DEC_PROM_O32(_prom_getenv, (char *(*)(char *), char *));
+int __DEC_PROM_O32(_prom_printf, (int (*)(char *, ...), char *, ...));
+
+
+#define rex_bootinit()		_rex_bootinit(__rex_bootinit)
+#define rex_bootread()		_rex_bootread(__rex_bootread)
+#define rex_getbitmap(x)	_rex_getbitmap(__rex_getbitmap, x)
+#define rex_slot_address(x)	_rex_slot_address(__rex_slot_address, x)
+#define rex_gettcinfo()		_rex_gettcinfo(__rex_gettcinfo)
+#define rex_getsysid()		_rex_getsysid(__rex_getsysid)
+#define rex_clear_cache()	_rex_clear_cache(__rex_clear_cache)
+
+#define prom_getchar()		_prom_getchar(__prom_getchar)
+#define prom_getenv(x)		_prom_getenv(__prom_getenv, x)
+#define prom_printf(x...)	_prom_printf(__prom_printf, x)
+
+#else /* !CONFIG_64BIT */
+
+/*
+ * On plain MIPS we just call PROM functions directly.
+ */
+#define rex_bootinit		__rex_bootinit
+#define rex_bootread		__rex_bootread
+#define rex_getbitmap		__rex_getbitmap
+#define rex_slot_address	__rex_slot_address
+#define rex_gettcinfo		__rex_gettcinfo
+#define rex_getsysid		__rex_getsysid
+#define rex_clear_cache		__rex_clear_cache
+
+#define prom_getchar		__prom_getchar
+#define prom_getenv		__prom_getenv
+#define prom_printf		__prom_printf
+
+#define pmax_open		__pmax_open
+#define pmax_lseek		__pmax_lseek
+#define pmax_read		__pmax_read
+#define pmax_close		__pmax_close
+
+#endif /* !CONFIG_64BIT */
+
+
+extern void prom_meminit(u32);
+extern void prom_identify_arch(u32);
+extern void prom_init_cmdline(s32, s32 *, u32);
+
+extern void register_prom_console(void);
+extern void unregister_prom_console(void);
+
+#endif /* _ASM_DEC_PROM_H */
diff --git a/arch/mips/include/asm/dec/system.h b/arch/mips/include/asm/dec/system.h
new file mode 100644
index 0000000..b2afacc
--- /dev/null
+++ b/arch/mips/include/asm/dec/system.h
@@ -0,0 +1,19 @@
+/*
+ *	include/asm-mips/dec/system.h
+ *
+ *	Generic DECstation/DECsystem bits.
+ *
+ *	Copyright (C) 2005, 2006  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_DEC_SYSTEM_H
+#define __ASM_DEC_SYSTEM_H
+
+extern unsigned long dec_kn_slot_base, dec_kn_slot_size;
+extern int dec_tc_bus;
+
+#endif /* __ASM_DEC_SYSTEM_H */
diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h
new file mode 100644
index 0000000..b0bccd2
--- /dev/null
+++ b/arch/mips/include/asm/delay.h
@@ -0,0 +1,112 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+#include <linux/param.h>
+#include <linux/smp.h>
+
+#include <asm/compiler.h>
+#include <asm/war.h>
+
+static inline void __delay(unsigned long loops)
+{
+	if (sizeof(long) == 4)
+		__asm__ __volatile__ (
+		"	.set	noreorder				\n"
+		"	.align	3					\n"
+		"1:	bnez	%0, 1b					\n"
+		"	subu	%0, 1					\n"
+		"	.set	reorder					\n"
+		: "=r" (loops)
+		: "0" (loops));
+	else if (sizeof(long) == 8 && !DADDI_WAR)
+		__asm__ __volatile__ (
+		"	.set	noreorder				\n"
+		"	.align	3					\n"
+		"1:	bnez	%0, 1b					\n"
+		"	dsubu	%0, 1					\n"
+		"	.set	reorder					\n"
+		: "=r" (loops)
+		: "0" (loops));
+	else if (sizeof(long) == 8 && DADDI_WAR)
+		__asm__ __volatile__ (
+		"	.set	noreorder				\n"
+		"	.align	3					\n"
+		"1:	bnez	%0, 1b					\n"
+		"	dsubu	%0, %2					\n"
+		"	.set	reorder					\n"
+		: "=r" (loops)
+		: "0" (loops), "r" (1));
+}
+
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+static inline void __udelay(unsigned long usecs, unsigned long lpj)
+{
+	unsigned long hi, lo;
+
+	/*
+	 * The rates of 128 is rounded wrongly by the catchall case
+	 * for 64-bit.  Excessive precission?  Probably ...
+	 */
+#if defined(CONFIG_64BIT) && (HZ == 128)
+	usecs *= 0x0008637bd05af6c7UL;		/* 2**64 / (1000000 / HZ) */
+#elif defined(CONFIG_64BIT)
+	usecs *= (0x8000000000000000UL / (500000 / HZ));
+#else /* 32-bit junk follows here */
+	usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
+	                           0x80000000ULL) >> 32);
+#endif
+
+	if (sizeof(long) == 4)
+		__asm__("multu\t%2, %3"
+		: "=h" (usecs), "=l" (lo)
+		: "r" (usecs), "r" (lpj)
+		: GCC_REG_ACCUM);
+	else if (sizeof(long) == 8 && !R4000_WAR)
+		__asm__("dmultu\t%2, %3"
+		: "=h" (usecs), "=l" (lo)
+		: "r" (usecs), "r" (lpj)
+		: GCC_REG_ACCUM);
+	else if (sizeof(long) == 8 && R4000_WAR)
+		__asm__("dmultu\t%3, %4\n\tmfhi\t%0"
+		: "=r" (usecs), "=h" (hi), "=l" (lo)
+		: "r" (usecs), "r" (lpj)
+		: GCC_REG_ACCUM);
+
+	__delay(usecs);
+}
+
+#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
+
+#define udelay(usecs) __udelay((usecs), __udelay_val)
+
+/* make sure "usecs *= ..." in udelay do not overflow. */
+#if HZ >= 1000
+#define MAX_UDELAY_MS	1
+#elif HZ <= 200
+#define MAX_UDELAY_MS	5
+#else
+#define MAX_UDELAY_MS	(1000 / HZ)
+#endif
+
+#endif /* _ASM_DELAY_H */
diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h
new file mode 100644
index 0000000..d8f9872
--- /dev/null
+++ b/arch/mips/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h
new file mode 100644
index 0000000..d1d6991
--- /dev/null
+++ b/arch/mips/include/asm/div64.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2000, 2004  Maciej W. Rozycki
+ * Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_DIV64_H
+#define _ASM_DIV64_H
+
+#include <linux/types.h>
+
+#if (_MIPS_SZLONG == 32)
+
+#include <asm/compiler.h>
+
+/*
+ * No traps on overflows for any of these...
+ */
+
+#define do_div64_32(res, high, low, base) ({ \
+	unsigned long __quot32, __mod32; \
+	unsigned long __cf, __tmp, __tmp2, __i; \
+	\
+	__asm__(".set	push\n\t" \
+		".set	noat\n\t" \
+		".set	noreorder\n\t" \
+		"move	%2, $0\n\t" \
+		"move	%3, $0\n\t" \
+		"b	1f\n\t" \
+		" li	%4, 0x21\n" \
+		"0:\n\t" \
+		"sll	$1, %0, 0x1\n\t" \
+		"srl	%3, %0, 0x1f\n\t" \
+		"or	%0, $1, %5\n\t" \
+		"sll	%1, %1, 0x1\n\t" \
+		"sll	%2, %2, 0x1\n" \
+		"1:\n\t" \
+		"bnez	%3, 2f\n\t" \
+		" sltu	%5, %0, %z6\n\t" \
+		"bnez	%5, 3f\n" \
+		"2:\n\t" \
+		" addiu	%4, %4, -1\n\t" \
+		"subu	%0, %0, %z6\n\t" \
+		"addiu	%2, %2, 1\n" \
+		"3:\n\t" \
+		"bnez	%4, 0b\n\t" \
+		" srl	%5, %1, 0x1f\n\t" \
+		".set	pop" \
+		: "=&r" (__mod32), "=&r" (__tmp), \
+		  "=&r" (__quot32), "=&r" (__cf), \
+		  "=&r" (__i), "=&r" (__tmp2) \
+		: "Jr" (base), "0" (high), "1" (low)); \
+	\
+	(res) = __quot32; \
+	__mod32; })
+
+#define do_div(n, base) ({ \
+	unsigned long long __quot; \
+	unsigned long __mod; \
+	unsigned long long __div; \
+	unsigned long __upper, __low, __high, __base; \
+	\
+	__div = (n); \
+	__base = (base); \
+	\
+	__high = __div >> 32; \
+	__low = __div; \
+	__upper = __high; \
+	\
+	if (__high) \
+		__asm__("divu	$0, %z2, %z3" \
+			: "=h" (__upper), "=l" (__high) \
+			: "Jr" (__high), "Jr" (__base) \
+			: GCC_REG_ACCUM); \
+	\
+	__mod = do_div64_32(__low, __upper, __low, __base); \
+	\
+	__quot = __high; \
+	__quot = __quot << 32 | __low; \
+	(n) = __quot; \
+	__mod; })
+
+#endif /* (_MIPS_SZLONG == 32) */
+
+#if (_MIPS_SZLONG == 64)
+
+/*
+ * Hey, we're already 64-bit, no
+ * need to play games..
+ */
+#define do_div(n, base) ({ \
+	unsigned long __quot; \
+	unsigned int __mod; \
+	unsigned long __div; \
+	unsigned int __base; \
+	\
+	__div = (n); \
+	__base = (base); \
+	\
+	__mod = __div % __base; \
+	__quot = __div / __base; \
+	\
+	(n) = __quot; \
+	__mod; })
+
+#endif /* (_MIPS_SZLONG == 64) */
+
+#endif /* _ASM_DIV64_H */
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
new file mode 100644
index 0000000..c64afb4
--- /dev/null
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <asm/scatterlist.h>
+#include <asm/cache.h>
+
+void *dma_alloc_noncoherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_noncoherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle);
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle);
+
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+	enum dma_data_direction direction);
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+	size_t size, enum dma_data_direction direction);
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	enum dma_data_direction direction);
+extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
+	unsigned long offset, size_t size, enum dma_data_direction direction);
+extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+	size_t size, enum dma_data_direction direction);
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+	int nhwentries, enum dma_data_direction direction);
+extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+	size_t size, enum dma_data_direction direction);
+extern void dma_sync_single_for_device(struct device *dev,
+	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction);
+extern void dma_sync_single_range_for_cpu(struct device *dev,
+	dma_addr_t dma_handle, unsigned long offset, size_t size,
+	enum dma_data_direction direction);
+extern void dma_sync_single_range_for_device(struct device *dev,
+	dma_addr_t dma_handle, unsigned long offset, size_t size,
+	enum dma_data_direction direction);
+extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+	int nelems, enum dma_data_direction direction);
+extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+	int nelems, enum dma_data_direction direction);
+extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
+extern int dma_supported(struct device *dev, u64 mask);
+
+static inline int
+dma_set_mask(struct device *dev, u64 mask)
+{
+	if(!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	/* XXX Largest on any MIPS */
+	return 128;
+}
+
+extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr);
+
+extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	       enum dma_data_direction direction);
+
+#if 0
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+
+extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+	dma_addr_t device_addr, size_t size, int flags);
+extern void dma_release_declared_memory(struct device *dev);
+extern void * dma_mark_declared_memory_occupied(struct device *dev,
+	dma_addr_t device_addr, size_t size);
+#endif
+
+#endif /* _ASM_DMA_MAPPING_H */
diff --git a/arch/mips/include/asm/dma.h b/arch/mips/include/asm/dma.h
new file mode 100644
index 0000000..1353c81
--- /dev/null
+++ b/arch/mips/include/asm/dma.h
@@ -0,0 +1,315 @@
+/*
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ *
+ * NOTE: all this is true *only* for ISA/EISA expansions on Mips boards
+ * and can only be used for expansion cards. Onboard DMA controllers, such
+ * as the R4030 on Jazz boards behave totally different!
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/io.h>			/* need byte IO */
+#include <linux/spinlock.h>		/* And spinlocks */
+#include <linux/delay.h>
+#include <asm/system.h>
+
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#ifndef CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN
+#define MAX_DMA_CHANNELS	8
+#endif
+
+/*
+ * The maximum address in KSEG0 that we can perform a DMA transfer to on this
+ * platform.  This describes only the PC style part of the DMA logic like on
+ * Deskstations or Acer PICA but not the much more versatile DMA logic used
+ * for the local devices on Acer PICA or Magnums.
+ */
+#if defined(CONFIG_SGI_IP22) || defined(CONFIG_SGI_IP28)
+/* don't care; ISA bus master won't work, ISA slave DMA supports 32bit addr */
+#define MAX_DMA_ADDRESS		PAGE_OFFSET
+#else
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + 0x01000000)
+#endif
+#define MAX_DMA_PFN		PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS))
+#define MAX_DMA32_PFN		(1UL << (32 - PAGE_SHIFT))
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+
+#define DMA_ADDR_0              0x00    /* DMA address registers */
+#define DMA_ADDR_1              0x02
+#define DMA_ADDR_2              0x04
+#define DMA_ADDR_3              0x06
+#define DMA_ADDR_4              0xC0
+#define DMA_ADDR_5              0xC4
+#define DMA_ADDR_6              0xC8
+#define DMA_ADDR_7              0xCC
+
+#define DMA_CNT_0               0x01    /* DMA count registers */
+#define DMA_CNT_1               0x03
+#define DMA_CNT_2               0x05
+#define DMA_CNT_3               0x07
+#define DMA_CNT_4               0xC2
+#define DMA_CNT_5               0xC6
+#define DMA_CNT_6               0xCA
+#define DMA_CNT_7               0xCE
+
+#define DMA_PAGE_0              0x87    /* DMA page registers */
+#define DMA_PAGE_1              0x83
+#define DMA_PAGE_2              0x81
+#define DMA_PAGE_3              0x82
+#define DMA_PAGE_5              0x8B
+#define DMA_PAGE_6              0x89
+#define DMA_PAGE_7              0x8A
+
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(0,  DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr<=3)
+		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+{
+	switch(dmanr) {
+		case 0:
+			dma_outb(pagenr, DMA_PAGE_0);
+			break;
+		case 1:
+			dma_outb(pagenr, DMA_PAGE_1);
+			break;
+		case 2:
+			dma_outb(pagenr, DMA_PAGE_2);
+			break;
+		case 3:
+			dma_outb(pagenr, DMA_PAGE_3);
+			break;
+		case 5:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+			break;
+		case 6:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+			break;
+		case 7:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+			break;
+	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	set_dma_page(dmanr, a>>16);
+	if (dmanr <= 3)  {
+	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else  {
+	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	}
+}
+
+
+/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+	if (dmanr <= 3)  {
+	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/mips/include/asm/ds1286.h b/arch/mips/include/asm/ds1286.h
new file mode 100644
index 0000000..6983b6f
--- /dev/null
+++ b/arch/mips/include/asm/ds1286.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ *
+ * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_DS1286_H
+#define _ASM_DS1286_H
+
+#include <ds1286.h>
+
+#endif /* _ASM_DS1286_H */
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
new file mode 100644
index 0000000..ba1702e
--- /dev/null
+++ b/arch/mips/include/asm/ds1287.h
@@ -0,0 +1,27 @@
+/*
+ *  DS1287 timer functions.
+ *
+ *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#ifndef __ASM_DS1287_H
+#define __ASM_DS1287_H
+
+extern int ds1287_timer_state(void);
+extern void ds1287_set_base_clock(unsigned int clock);
+extern int ds1287_clockevent_init(int irq);
+
+#endif
diff --git a/arch/mips/include/asm/dsp.h b/arch/mips/include/asm/dsp.h
new file mode 100644
index 0000000..e9bfc08
--- /dev/null
+++ b/arch/mips/include/asm/dsp.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2005 Mips Technologies
+ * Author: Chris Dearman, chris@mips.com derived from fpu.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_DSP_H
+#define _ASM_DSP_H
+
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/hazards.h>
+#include <asm/mipsregs.h>
+
+#define DSP_DEFAULT	0x00000000
+#define DSP_MASK	0x3ff
+
+#define __enable_dsp_hazard()						\
+do {									\
+	asm("_ehb");							\
+} while (0)
+
+static inline void __init_dsp(void)
+{
+	mthi1(0);
+	mtlo1(0);
+	mthi2(0);
+	mtlo2(0);
+	mthi3(0);
+	mtlo3(0);
+	wrdsp(DSP_DEFAULT, DSP_MASK);
+}
+
+static inline void init_dsp(void)
+{
+	if (cpu_has_dsp)
+		__init_dsp();
+}
+
+#define __save_dsp(tsk)							\
+do {									\
+	tsk->thread.dsp.dspr[0] = mfhi1();				\
+	tsk->thread.dsp.dspr[1] = mflo1();				\
+	tsk->thread.dsp.dspr[2] = mfhi2();				\
+	tsk->thread.dsp.dspr[3] = mflo2();				\
+	tsk->thread.dsp.dspr[4] = mfhi3();				\
+	tsk->thread.dsp.dspr[5] = mflo3();				\
+	tsk->thread.dsp.dspcontrol = rddsp(DSP_MASK);			\
+} while (0)
+
+#define save_dsp(tsk)							\
+do {									\
+	if (cpu_has_dsp)						\
+		__save_dsp(tsk);					\
+} while (0)
+
+#define __restore_dsp(tsk)						\
+do {									\
+	mthi1(tsk->thread.dsp.dspr[0]);					\
+	mtlo1(tsk->thread.dsp.dspr[1]);					\
+	mthi2(tsk->thread.dsp.dspr[2]);					\
+	mtlo2(tsk->thread.dsp.dspr[3]);					\
+	mthi3(tsk->thread.dsp.dspr[4]);					\
+	mtlo3(tsk->thread.dsp.dspr[5]);					\
+	wrdsp(tsk->thread.dsp.dspcontrol, DSP_MASK);			\
+} while (0)
+
+#define restore_dsp(tsk)						\
+do {									\
+	if (cpu_has_dsp)						\
+		__restore_dsp(tsk);					\
+} while (0)
+
+#define __get_dsp_regs(tsk)						\
+({									\
+	if (tsk == current)						\
+		__save_dsp(current);					\
+									\
+	tsk->thread.dsp.dspr;						\
+})
+
+#endif /* _ASM_DSP_H */
diff --git a/arch/mips/include/asm/edac.h b/arch/mips/include/asm/edac.h
new file mode 100644
index 0000000..4da0c1f
--- /dev/null
+++ b/arch/mips/include/asm/edac.h
@@ -0,0 +1,34 @@
+#ifndef ASM_EDAC_H
+#define ASM_EDAC_H
+
+/* ECC atomic, DMA, SMP and interrupt safe scrub function */
+
+static inline void atomic_scrub(void *va, u32 size)
+{
+	unsigned long *virt_addr = va;
+	unsigned long temp;
+	u32 i;
+
+	for (i = 0; i < size / sizeof(unsigned long); i++) {
+		/*
+		 * Very carefully read and write to memory atomically
+		 * so we are interrupt, DMA and SMP safe.
+		 *
+		 * Intel: asm("lock; addl $0, %0"::"m"(*virt_addr));
+		 */
+
+		__asm__ __volatile__ (
+		"	.set	mips2					\n"
+		"1:	ll	%0, %1		# atomic_scrub		\n"
+		"	addu	%0, $0					\n"
+		"	sc	%0, %1					\n"
+		"	beqz	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*virt_addr)
+		: "m" (*virt_addr));
+
+		virt_addr++;
+	}
+}
+
+#endif
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
new file mode 100644
index 0000000..a8eac16
--- /dev/null
+++ b/arch/mips/include/asm/elf.h
@@ -0,0 +1,367 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Much of this is taken from binutils and GNU libc ...
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+
+
+/* ELF header e_flags defines. */
+/* MIPS architecture level. */
+#define EF_MIPS_ARCH_1		0x00000000	/* -mips1 code.  */
+#define EF_MIPS_ARCH_2		0x10000000	/* -mips2 code.  */
+#define EF_MIPS_ARCH_3		0x20000000	/* -mips3 code.  */
+#define EF_MIPS_ARCH_4		0x30000000	/* -mips4 code.  */
+#define EF_MIPS_ARCH_5		0x40000000	/* -mips5 code.  */
+#define EF_MIPS_ARCH_32		0x50000000	/* MIPS32 code.  */
+#define EF_MIPS_ARCH_64		0x60000000	/* MIPS64 code.  */
+#define EF_MIPS_ARCH_32R2	0x70000000	/* MIPS32 R2 code.  */
+#define EF_MIPS_ARCH_64R2	0x80000000	/* MIPS64 R2 code.  */
+
+/* The ABI of a file. */
+#define EF_MIPS_ABI_O32		0x00001000	/* O32 ABI.  */
+#define EF_MIPS_ABI_O64		0x00002000	/* O32 extended for 64 bit.  */
+
+#define PT_MIPS_REGINFO		0x70000000
+#define PT_MIPS_RTPROC		0x70000001
+#define PT_MIPS_OPTIONS		0x70000002
+
+/* Flags in the e_flags field of the header */
+#define EF_MIPS_NOREORDER	0x00000001
+#define EF_MIPS_PIC		0x00000002
+#define EF_MIPS_CPIC		0x00000004
+#define EF_MIPS_ABI2		0x00000020
+#define EF_MIPS_OPTIONS_FIRST	0x00000080
+#define EF_MIPS_32BITMODE	0x00000100
+#define EF_MIPS_ABI		0x0000f000
+#define EF_MIPS_ARCH		0xf0000000
+
+#define DT_MIPS_RLD_VERSION	0x70000001
+#define DT_MIPS_TIME_STAMP	0x70000002
+#define DT_MIPS_ICHECKSUM	0x70000003
+#define DT_MIPS_IVERSION	0x70000004
+#define DT_MIPS_FLAGS		0x70000005
+	#define RHF_NONE	0x00000000
+	#define RHF_HARDWAY	0x00000001
+	#define RHF_NOTPOT	0x00000002
+	#define RHF_SGI_ONLY	0x00000010
+#define DT_MIPS_BASE_ADDRESS	0x70000006
+#define DT_MIPS_CONFLICT	0x70000008
+#define DT_MIPS_LIBLIST		0x70000009
+#define DT_MIPS_LOCAL_GOTNO	0x7000000a
+#define DT_MIPS_CONFLICTNO	0x7000000b
+#define DT_MIPS_LIBLISTNO	0x70000010
+#define DT_MIPS_SYMTABNO	0x70000011
+#define DT_MIPS_UNREFEXTNO	0x70000012
+#define DT_MIPS_GOTSYM		0x70000013
+#define DT_MIPS_HIPAGENO	0x70000014
+#define DT_MIPS_RLD_MAP		0x70000016
+
+#define R_MIPS_NONE		0
+#define R_MIPS_16		1
+#define R_MIPS_32		2
+#define R_MIPS_REL32		3
+#define R_MIPS_26		4
+#define R_MIPS_HI16		5
+#define R_MIPS_LO16		6
+#define R_MIPS_GPREL16		7
+#define R_MIPS_LITERAL		8
+#define R_MIPS_GOT16		9
+#define R_MIPS_PC16		10
+#define R_MIPS_CALL16		11
+#define R_MIPS_GPREL32		12
+/* The remaining relocs are defined on Irix, although they are not
+   in the MIPS ELF ABI.  */
+#define R_MIPS_UNUSED1		13
+#define R_MIPS_UNUSED2		14
+#define R_MIPS_UNUSED3		15
+#define R_MIPS_SHIFT5		16
+#define R_MIPS_SHIFT6		17
+#define R_MIPS_64		18
+#define R_MIPS_GOT_DISP		19
+#define R_MIPS_GOT_PAGE		20
+#define R_MIPS_GOT_OFST		21
+/*
+ * The following two relocation types are specified in the MIPS ABI
+ * conformance guide version 1.2 but not yet in the psABI.
+ */
+#define R_MIPS_GOTHI16		22
+#define R_MIPS_GOTLO16		23
+#define R_MIPS_SUB		24
+#define R_MIPS_INSERT_A		25
+#define R_MIPS_INSERT_B		26
+#define R_MIPS_DELETE		27
+#define R_MIPS_HIGHER		28
+#define R_MIPS_HIGHEST		29
+/*
+ * The following two relocation types are specified in the MIPS ABI
+ * conformance guide version 1.2 but not yet in the psABI.
+ */
+#define R_MIPS_CALLHI16		30
+#define R_MIPS_CALLLO16		31
+/*
+ * This range is reserved for vendor specific relocations.
+ */
+#define R_MIPS_LOVENDOR		100
+#define R_MIPS_HIVENDOR		127
+
+#define SHN_MIPS_ACCOMON	0xff00		/* Allocated common symbols */
+#define SHN_MIPS_TEXT		0xff01		/* Allocated test symbols.  */
+#define SHN_MIPS_DATA		0xff02		/* Allocated data symbols.  */
+#define SHN_MIPS_SCOMMON	0xff03		/* Small common symbols */
+#define SHN_MIPS_SUNDEFINED	0xff04		/* Small undefined symbols */
+
+#define SHT_MIPS_LIST		0x70000000
+#define SHT_MIPS_CONFLICT	0x70000002
+#define SHT_MIPS_GPTAB		0x70000003
+#define SHT_MIPS_UCODE		0x70000004
+#define SHT_MIPS_DEBUG		0x70000005
+#define SHT_MIPS_REGINFO	0x70000006
+#define SHT_MIPS_PACKAGE	0x70000007
+#define SHT_MIPS_PACKSYM	0x70000008
+#define SHT_MIPS_RELD		0x70000009
+#define SHT_MIPS_IFACE		0x7000000b
+#define SHT_MIPS_CONTENT	0x7000000c
+#define SHT_MIPS_OPTIONS	0x7000000d
+#define SHT_MIPS_SHDR		0x70000010
+#define SHT_MIPS_FDESC		0x70000011
+#define SHT_MIPS_EXTSYM		0x70000012
+#define SHT_MIPS_DENSE		0x70000013
+#define SHT_MIPS_PDESC		0x70000014
+#define SHT_MIPS_LOCSYM		0x70000015
+#define SHT_MIPS_AUXSYM		0x70000016
+#define SHT_MIPS_OPTSYM		0x70000017
+#define SHT_MIPS_LOCSTR		0x70000018
+#define SHT_MIPS_LINE		0x70000019
+#define SHT_MIPS_RFDESC		0x7000001a
+#define SHT_MIPS_DELTASYM	0x7000001b
+#define SHT_MIPS_DELTAINST	0x7000001c
+#define SHT_MIPS_DELTACLASS	0x7000001d
+#define SHT_MIPS_DWARF		0x7000001e
+#define SHT_MIPS_DELTADECL	0x7000001f
+#define SHT_MIPS_SYMBOL_LIB	0x70000020
+#define SHT_MIPS_EVENTS		0x70000021
+#define SHT_MIPS_TRANSLATE	0x70000022
+#define SHT_MIPS_PIXIE		0x70000023
+#define SHT_MIPS_XLATE		0x70000024
+#define SHT_MIPS_XLATE_DEBUG	0x70000025
+#define SHT_MIPS_WHIRL		0x70000026
+#define SHT_MIPS_EH_REGION	0x70000027
+#define SHT_MIPS_XLATE_OLD	0x70000028
+#define SHT_MIPS_PDR_EXCEPTION	0x70000029
+
+#define SHF_MIPS_GPREL		0x10000000
+#define SHF_MIPS_MERGE		0x20000000
+#define SHF_MIPS_ADDR		0x40000000
+#define SHF_MIPS_STRING		0x80000000
+#define SHF_MIPS_NOSTRIP	0x08000000
+#define SHF_MIPS_LOCAL		0x04000000
+#define SHF_MIPS_NAMES		0x02000000
+#define SHF_MIPS_NODUPES	0x01000000
+
+#ifndef ELF_ARCH
+/* ELF register definitions */
+#define ELF_NGREG	45
+#define ELF_NFPREG	33
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+#ifdef CONFIG_32BIT
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr)						\
+({									\
+	int __res = 1;							\
+	struct elfhdr *__h = (hdr);					\
+									\
+	if (__h->e_machine != EM_MIPS)					\
+		__res = 0;						\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
+		__res = 0;						\
+	if ((__h->e_flags & EF_MIPS_ABI2) != 0)				\
+		__res = 0;						\
+	if (((__h->e_flags & EF_MIPS_ABI) != 0) &&			\
+	    ((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32))		\
+		__res = 0;						\
+									\
+	__res;								\
+})
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr)						\
+({									\
+	int __res = 1;							\
+	struct elfhdr *__h = (hdr);					\
+									\
+	if (__h->e_machine != EM_MIPS)					\
+		__res = 0;						\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS64) 			\
+		__res = 0;						\
+									\
+	__res;								\
+})
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#ifdef __MIPSEB__
+#define ELF_DATA	ELFDATA2MSB
+#elif __MIPSEL__
+#define ELF_DATA	ELFDATA2LSB
+#endif
+#define ELF_ARCH	EM_MIPS
+
+#endif /* !defined(ELF_ARCH) */
+
+struct mips_abi;
+
+extern struct mips_abi mips_abi;
+extern struct mips_abi mips_abi_32;
+extern struct mips_abi mips_abi_n32;
+
+#ifdef CONFIG_32BIT
+
+#define SET_PERSONALITY(ex)						\
+do {									\
+	set_personality(PER_LINUX);					\
+									\
+	current->thread.abi = &mips_abi;				\
+} while (0)
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#ifdef CONFIG_MIPS32_N32
+#define __SET_PERSONALITY32_N32()					\
+	do {								\
+		set_thread_flag(TIF_32BIT_ADDR);			\
+		current->thread.abi = &mips_abi_n32;			\
+	} while (0)
+#else
+#define __SET_PERSONALITY32_N32()					\
+	do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS32_O32
+#define __SET_PERSONALITY32_O32()					\
+	do {								\
+		set_thread_flag(TIF_32BIT_REGS);			\
+		set_thread_flag(TIF_32BIT_ADDR);			\
+		current->thread.abi = &mips_abi_32;			\
+	} while (0)
+#else
+#define __SET_PERSONALITY32_O32()					\
+	do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS32_COMPAT
+#define __SET_PERSONALITY32(ex)						\
+do {									\
+	if ((((ex).e_flags & EF_MIPS_ABI2) != 0) &&			\
+	     ((ex).e_flags & EF_MIPS_ABI) == 0)				\
+		__SET_PERSONALITY32_N32();				\
+	else								\
+		__SET_PERSONALITY32_O32();				\
+} while (0)
+#else
+#define __SET_PERSONALITY32(ex)	do { } while (0)
+#endif
+
+#define SET_PERSONALITY(ex)						\
+do {									\
+	clear_thread_flag(TIF_32BIT_REGS);				\
+	clear_thread_flag(TIF_32BIT_ADDR);				\
+									\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)			\
+		__SET_PERSONALITY32(ex);				\
+	else								\
+		current->thread.abi = &mips_abi;			\
+									\
+	if (current->personality != PER_LINUX32)			\
+		set_personality(PER_LINUX);				\
+} while (0)
+
+#endif /* CONFIG_64BIT */
+
+struct task_struct;
+
+extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
+extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_REGS(elf_regs, regs)			\
+	elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs)			\
+	dump_task_fpu(tsk, elf_fpregs)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP       (0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  (NULL)
+
+/*
+ * See comments in asm-alpha/elf.h, this is the same thing
+ * on the MIPS.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)	do { \
+	_r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0;	\
+	_r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0;	\
+	_r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0;	\
+	_r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0;	\
+	_r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0;	\
+	_r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0;	\
+	_r->regs[25] = _r->regs[26] = _r->regs[27] = _r->regs[28] = 0;	\
+	_r->regs[30] = _r->regs[31] = 0;				\
+} while (0)
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#ifndef ELF_ET_DYN_BASE
+#define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
+#endif
+
+#endif /* _ASM_ELF_H */
diff --git a/arch/mips/include/asm/emergency-restart.h b/arch/mips/include/asm/emergency-restart.h
new file mode 100644
index 0000000..108d8c4
--- /dev/null
+++ b/arch/mips/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/mips/include/asm/emma2rh/emma2rh.h b/arch/mips/include/asm/emma2rh/emma2rh.h
new file mode 100644
index 0000000..6a1af0a
--- /dev/null
+++ b/arch/mips/include/asm/emma2rh/emma2rh.h
@@ -0,0 +1,333 @@
+/*
+ *  include/asm-mips/emma2rh/emma2rh.h
+ *      This file is EMMA2RH common header.
+ *
+ *  Copyright (C) NEC Electronics Corporation 2005-2006
+ *
+ *  This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
+ *          Copyright 2001 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_EMMA2RH_EMMA2RH_H
+#define __ASM_EMMA2RH_EMMA2RH_H
+
+#include <irq.h>
+
+/*
+ * EMMA2RH registers
+ */
+#define REGBASE 0x10000000
+
+#define EMMA2RH_BHIF_STRAP_0	(0x000010+REGBASE)
+#define EMMA2RH_BHIF_INT_ST_0	(0x000030+REGBASE)
+#define EMMA2RH_BHIF_INT_ST_1	(0x000034+REGBASE)
+#define EMMA2RH_BHIF_INT_ST_2	(0x000038+REGBASE)
+#define EMMA2RH_BHIF_INT_EN_0	(0x000040+REGBASE)
+#define EMMA2RH_BHIF_INT_EN_1	(0x000044+REGBASE)
+#define EMMA2RH_BHIF_INT_EN_2	(0x000048+REGBASE)
+#define EMMA2RH_BHIF_INT1_EN_0	(0x000050+REGBASE)
+#define EMMA2RH_BHIF_INT1_EN_1	(0x000054+REGBASE)
+#define EMMA2RH_BHIF_INT1_EN_2	(0x000058+REGBASE)
+#define EMMA2RH_BHIF_SW_INT	(0x000070+REGBASE)
+#define EMMA2RH_BHIF_SW_INT_EN	(0x000080+REGBASE)
+#define EMMA2RH_BHIF_SW_INT_CLR	(0x000090+REGBASE)
+#define EMMA2RH_BHIF_MAIN_CTRL	(0x0000b4+REGBASE)
+#define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS	(0x0000c0+REGBASE)
+#define EMMA2RH_GPIO_DIR	(0x110d20+REGBASE)
+#define EMMA2RH_GPIO_INT_ST	(0x110d30+REGBASE)
+#define EMMA2RH_GPIO_INT_MASK	(0x110d3c+REGBASE)
+#define EMMA2RH_GPIO_INT_MODE	(0x110d48+REGBASE)
+#define EMMA2RH_GPIO_INT_CND_A	(0x110d54+REGBASE)
+#define EMMA2RH_GPIO_INT_CND_B	(0x110d60+REGBASE)
+#define EMMA2RH_PBRD_INT_EN	(0x100010+REGBASE)
+#define EMMA2RH_PBRD_CLKSEL	(0x100028+REGBASE)
+#define EMMA2RH_PFUR0_BASE	(0x101000+REGBASE)
+#define EMMA2RH_PFUR1_BASE	(0x102000+REGBASE)
+#define EMMA2RH_PFUR2_BASE	(0x103000+REGBASE)
+#define EMMA2RH_PIIC0_BASE	(0x107000+REGBASE)
+#define EMMA2RH_PIIC1_BASE	(0x108000+REGBASE)
+#define EMMA2RH_PIIC2_BASE	(0x109000+REGBASE)
+#define EMMA2RH_PCI_CONTROL	(0x200000+REGBASE)
+#define EMMA2RH_PCI_ARBIT_CTR	(0x200004+REGBASE)
+#define EMMA2RH_PCI_IWIN0_CTR	(0x200010+REGBASE)
+#define EMMA2RH_PCI_IWIN1_CTR	(0x200014+REGBASE)
+#define EMMA2RH_PCI_INIT_ESWP	(0x200018+REGBASE)
+#define EMMA2RH_PCI_INT		(0x200020+REGBASE)
+#define EMMA2RH_PCI_INT_EN	(0x200024+REGBASE)
+#define EMMA2RH_PCI_TWIN_CTR	(0x200030+REGBASE)
+#define EMMA2RH_PCI_TWIN_BADR	(0x200034+REGBASE)
+#define EMMA2RH_PCI_TWIN0_DADR	(0x200038+REGBASE)
+#define EMMA2RH_PCI_TWIN1_DADR	(0x20003c+REGBASE)
+
+/*
+ *  Memory map (physical address)
+ *
+ *  Note most of the following address must be properly aligned by the
+ *  corresponding size.  For example, if PCI_IO_SIZE is 16MB, then
+ *  PCI_IO_BASE must be aligned along 16MB boundary.
+ */
+
+/* the actual ram size is detected at run-time */
+#define EMMA2RH_RAM_BASE	0x00000000
+#define EMMA2RH_RAM_SIZE	0x10000000	/* less than 256MB */
+
+#define EMMA2RH_IO_BASE		0x10000000
+#define EMMA2RH_IO_SIZE		0x01000000	/* 16 MB */
+
+#define EMMA2RH_GENERALIO_BASE	0x11000000
+#define EMMA2RH_GENERALIO_SIZE	0x01000000	/* 16 MB */
+
+#define EMMA2RH_PCI_IO_BASE	0x12000000
+#define EMMA2RH_PCI_IO_SIZE	0x02000000	/* 32 MB */
+
+#define EMMA2RH_PCI_MEM_BASE	0x14000000
+#define EMMA2RH_PCI_MEM_SIZE	0x08000000	/* 128 MB */
+
+#define EMMA2RH_ROM_BASE	0x1c000000
+#define EMMA2RH_ROM_SIZE	0x04000000	/* 64 MB */
+
+#define EMMA2RH_PCI_CONFIG_BASE	EMMA2RH_PCI_IO_BASE
+#define EMMA2RH_PCI_CONFIG_SIZE	EMMA2RH_PCI_IO_SIZE
+
+#define NUM_CPU_IRQ		8
+#define NUM_EMMA2RH_IRQ		96
+
+#define CPU_EMMA2RH_CASCADE	2
+#define CPU_IRQ_BASE		MIPS_CPU_IRQ_BASE
+#define EMMA2RH_IRQ_BASE	(CPU_IRQ_BASE + NUM_CPU_IRQ)
+
+/*
+ * emma2rh irq defs
+ */
+
+#define EMMA2RH_IRQ_INT0	(0 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT1	(1 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT2	(2 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT3	(3 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT4	(4 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT5	(5 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT6	(6 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT7	(7 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT8	(8 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT9	(9 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT10	(10 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT11	(11 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT12	(12 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT13	(13 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT14	(14 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT15	(15 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT16	(16 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT17	(17 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT18	(18 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT19	(19 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT20	(20 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT21	(21 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT22	(22 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT23	(23 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT24	(24 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT25	(25 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT26	(26 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT27	(27 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT28	(28 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT29	(29 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT30	(30 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT31	(31 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT32	(32 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT33	(33 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT34	(34 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT35	(35 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT36	(36 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT37	(37 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT38	(38 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT39	(39 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT40	(40 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT41	(41 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT42	(42 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT43	(43 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT44	(44 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT45	(45 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT46	(46 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT47	(47 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT48	(48 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT49	(49 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT50	(50 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT51	(51 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT52	(52 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT53	(53 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT54	(54 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT55	(55 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT56	(56 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT57	(57 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT58	(58 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT59	(59 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT60	(60 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT61	(61 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT62	(62 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT63	(63 + EMMA2RH_IRQ_BASE)
+
+#define EMMA2RH_IRQ_PFUR0	EMMA2RH_IRQ_INT49
+#define EMMA2RH_IRQ_PFUR1	EMMA2RH_IRQ_INT50
+#define EMMA2RH_IRQ_PFUR2	EMMA2RH_IRQ_INT51
+#define EMMA2RH_IRQ_PIIC0	EMMA2RH_IRQ_INT56
+#define EMMA2RH_IRQ_PIIC1	EMMA2RH_IRQ_INT57
+#define EMMA2RH_IRQ_PIIC2	EMMA2RH_IRQ_INT58
+
+/*
+ *  EMMA2RH Register Access
+ */
+
+#define EMMA2RH_BASE (0xa0000000)
+
+static inline void emma2rh_sync(void)
+{
+	volatile u32 *p = (volatile u32 *)0xbfc00000;
+	(void)(*p);
+}
+
+static inline void emma2rh_out32(u32 offset, u32 val)
+{
+	*(volatile u32 *)(EMMA2RH_BASE | offset) = val;
+	emma2rh_sync();
+}
+
+static inline u32 emma2rh_in32(u32 offset)
+{
+	u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset);
+	emma2rh_sync();
+	return val;
+}
+
+static inline void emma2rh_out16(u32 offset, u16 val)
+{
+	*(volatile u16 *)(EMMA2RH_BASE | offset) = val;
+	emma2rh_sync();
+}
+
+static inline u16 emma2rh_in16(u32 offset)
+{
+	u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset);
+	emma2rh_sync();
+	return val;
+}
+
+static inline void emma2rh_out8(u32 offset, u8 val)
+{
+	*(volatile u8 *)(EMMA2RH_BASE | offset) = val;
+	emma2rh_sync();
+}
+
+static inline u8 emma2rh_in8(u32 offset)
+{
+	u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset);
+	emma2rh_sync();
+	return val;
+}
+
+/**
+ * IIC registers map
+ **/
+
+/*---------------------------------------------------------------------------*/
+/* CNT - Control register (00H R/W)                                          */
+/*---------------------------------------------------------------------------*/
+#define SPT         0x00000001
+#define STT         0x00000002
+#define ACKE        0x00000004
+#define WTIM        0x00000008
+#define SPIE        0x00000010
+#define WREL        0x00000020
+#define LREL        0x00000040
+#define IICE        0x00000080
+#define CNT_RESERVED    0x000000ff	/* reserved bit 0 */
+
+#define I2C_EMMA_START      (IICE | STT)
+#define I2C_EMMA_STOP       (IICE | SPT)
+#define I2C_EMMA_REPSTART   I2C_EMMA_START
+
+/*---------------------------------------------------------------------------*/
+/* STA - Status register (10H Read)                                          */
+/*---------------------------------------------------------------------------*/
+#define MSTS        0x00000080
+#define ALD         0x00000040
+#define EXC         0x00000020
+#define COI         0x00000010
+#define TRC         0x00000008
+#define ACKD        0x00000004
+#define STD         0x00000002
+#define SPD         0x00000001
+
+/*---------------------------------------------------------------------------*/
+/* CSEL - Clock select register (20H R/W)                                    */
+/*---------------------------------------------------------------------------*/
+#define FCL         0x00000080
+#define ND50        0x00000040
+#define CLD         0x00000020
+#define DAD         0x00000010
+#define SMC         0x00000008
+#define DFC         0x00000004
+#define CL          0x00000003
+#define CSEL_RESERVED   0x000000ff	/* reserved bit 0 */
+
+#define FAST397     0x0000008b
+#define FAST297     0x0000008a
+#define FAST347     0x0000000b
+#define FAST260     0x0000000a
+#define FAST130     0x00000008
+#define STANDARD108 0x00000083
+#define STANDARD83  0x00000082
+#define STANDARD95  0x00000003
+#define STANDARD73  0x00000002
+#define STANDARD36  0x00000001
+#define STANDARD71  0x00000000
+
+/*---------------------------------------------------------------------------*/
+/* SVA - Slave address register (30H R/W)                                    */
+/*---------------------------------------------------------------------------*/
+#define SVA         0x000000fe
+
+/*---------------------------------------------------------------------------*/
+/* SHR - Shift register (40H R/W)                                            */
+/*---------------------------------------------------------------------------*/
+#define SR          0x000000ff
+
+/*---------------------------------------------------------------------------*/
+/* INT - Interrupt register (50H R/W)                                        */
+/* INTM - Interrupt mask register (60H R/W)                                  */
+/*---------------------------------------------------------------------------*/
+#define INTE0       0x00000001
+
+/***********************************************************************
+ * I2C registers
+ ***********************************************************************
+ */
+#define I2C_EMMA_CNT            0x00
+#define I2C_EMMA_STA            0x10
+#define I2C_EMMA_CSEL           0x20
+#define I2C_EMMA_SVA            0x30
+#define I2C_EMMA_SHR            0x40
+#define I2C_EMMA_INT            0x50
+#define I2C_EMMA_INTM           0x60
+
+/*
+ * include the board dependent part
+ */
+#if defined(CONFIG_MARKEINS)
+#include <asm/emma2rh/markeins.h>
+#else
+#error "Unknown EMMA2RH board!"
+#endif
+
+#endif /* __ASM_EMMA2RH_EMMA2RH_H */
diff --git a/arch/mips/include/asm/emma2rh/markeins.h b/arch/mips/include/asm/emma2rh/markeins.h
new file mode 100644
index 0000000..973b062
--- /dev/null
+++ b/arch/mips/include/asm/emma2rh/markeins.h
@@ -0,0 +1,75 @@
+/*
+ *  include/asm-mips/emma2rh/markeins.h
+ *      This file is EMMA2RH board depended header.
+ *
+ *  Copyright (C) NEC Electronics Corporation 2005-2006
+ *
+ *  This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
+ *          Copyright 2001 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef MARKEINS_H
+#define MARKEINS_H
+
+#define NUM_EMMA2RH_IRQ_SW	32
+#define NUM_EMMA2RH_IRQ_GPIO	32
+
+#define EMMA2RH_SW_CASCADE	(EMMA2RH_IRQ_INT7 - EMMA2RH_IRQ_INT0)
+#define EMMA2RH_GPIO_CASCADE	(EMMA2RH_IRQ_INT46 - EMMA2RH_IRQ_INT0)
+
+#define EMMA2RH_SW_IRQ_BASE	(EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ)
+#define EMMA2RH_GPIO_IRQ_BASE	(EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW)
+
+#define EMMA2RH_SW_IRQ_INT0	(0+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT1	(1+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT2	(2+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT3	(3+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT4	(4+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT5	(5+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT6	(6+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT7	(7+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT8	(8+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT9	(9+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT10	(10+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT11	(11+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT12	(12+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT13	(13+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT14	(14+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT15	(15+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT16	(16+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT17	(17+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT18	(18+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT19	(19+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT20	(20+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT21	(21+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT22	(22+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT23	(23+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT24	(24+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT25	(25+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT26	(26+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT27	(27+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT28	(28+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT29	(29+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT30	(30+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT31	(31+EMMA2RH_SW_IRQ_BASE)
+
+#define MARKEINS_PCI_IRQ_INTA	EMMA2RH_GPIO_IRQ_BASE+15
+#define MARKEINS_PCI_IRQ_INTB	EMMA2RH_GPIO_IRQ_BASE+16
+#define MARKEINS_PCI_IRQ_INTC	EMMA2RH_GPIO_IRQ_BASE+17
+#define MARKEINS_PCI_IRQ_INTD	EMMA2RH_GPIO_IRQ_BASE+18
+
+#endif /* CONFIG_MARKEINS */
diff --git a/arch/mips/include/asm/errno.h b/arch/mips/include/asm/errno.h
new file mode 100644
index 0000000..3c0d840
--- /dev/null
+++ b/arch/mips/include/asm/errno.h
@@ -0,0 +1,131 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_ERRNO_H
+#define _ASM_ERRNO_H
+
+/*
+ * These error numbers are intended to be MIPS ABI compatible
+ */
+
+#include <asm-generic/errno-base.h>
+
+#define	ENOMSG		35	/* No message of desired type */
+#define	EIDRM		36	/* Identifier removed */
+#define	ECHRNG		37	/* Channel number out of range */
+#define	EL2NSYNC	38	/* Level 2 not synchronized */
+#define	EL3HLT		39	/* Level 3 halted */
+#define	EL3RST		40	/* Level 3 reset */
+#define	ELNRNG		41	/* Link number out of range */
+#define	EUNATCH		42	/* Protocol driver not attached */
+#define	ENOCSI		43	/* No CSI structure available */
+#define	EL2HLT		44	/* Level 2 halted */
+#define	EDEADLK		45	/* Resource deadlock would occur */
+#define	ENOLCK		46	/* No record locks available */
+#define	EBADE		50	/* Invalid exchange */
+#define	EBADR		51	/* Invalid request descriptor */
+#define	EXFULL		52	/* Exchange full */
+#define	ENOANO		53	/* No anode */
+#define	EBADRQC		54	/* Invalid request code */
+#define	EBADSLT		55	/* Invalid slot */
+#define	EDEADLOCK	56	/* File locking deadlock error */
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EMULTIHOP	74	/* Multihop attempted */
+#define	EBADMSG		77	/* Not a data message */
+#define	ENAMETOOLONG	78	/* File name too long */
+#define	EOVERFLOW	79	/* Value too large for defined data type */
+#define	ENOTUNIQ	80	/* Name not unique on network */
+#define	EBADFD		81	/* File descriptor in bad state */
+#define	EREMCHG		82	/* Remote address changed */
+#define	ELIBACC		83	/* Can not access a needed shared library */
+#define	ELIBBAD		84	/* Accessing a corrupted shared library */
+#define	ELIBSCN		85	/* .lib section in a.out corrupted */
+#define	ELIBMAX		86	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	87	/* Cannot exec a shared library directly */
+#define	EILSEQ		88	/* Illegal byte sequence */
+#define	ENOSYS		89	/* Function not implemented */
+#define	ELOOP		90	/* Too many symbolic links encountered */
+#define	ERESTART	91	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	92	/* Streams pipe error */
+#define	ENOTEMPTY	93	/* Directory not empty */
+#define	EUSERS		94	/* Too many users */
+#define	ENOTSOCK	95	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	96	/* Destination address required */
+#define	EMSGSIZE	97	/* Message too long */
+#define	EPROTOTYPE	98	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	99	/* Protocol not available */
+#define	EPROTONOSUPPORT	120	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	121	/* Socket type not supported */
+#define	EOPNOTSUPP	122	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	123	/* Protocol family not supported */
+#define	EAFNOSUPPORT	124	/* Address family not supported by protocol */
+#define	EADDRINUSE	125	/* Address already in use */
+#define	EADDRNOTAVAIL	126	/* Cannot assign requested address */
+#define	ENETDOWN	127	/* Network is down */
+#define	ENETUNREACH	128	/* Network is unreachable */
+#define	ENETRESET	129	/* Network dropped connection because of reset */
+#define	ECONNABORTED	130	/* Software caused connection abort */
+#define	ECONNRESET	131	/* Connection reset by peer */
+#define	ENOBUFS		132	/* No buffer space available */
+#define	EISCONN		133	/* Transport endpoint is already connected */
+#define	ENOTCONN	134	/* Transport endpoint is not connected */
+#define	EUCLEAN		135	/* Structure needs cleaning */
+#define	ENOTNAM		137	/* Not a XENIX named type file */
+#define	ENAVAIL		138	/* No XENIX semaphores available */
+#define	EISNAM		139	/* Is a named type file */
+#define	EREMOTEIO	140	/* Remote I/O error */
+#define EINIT		141	/* Reserved */
+#define EREMDEV		142	/* Error 142 */
+#define	ESHUTDOWN	143	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	144	/* Too many references: cannot splice */
+#define	ETIMEDOUT	145	/* Connection timed out */
+#define	ECONNREFUSED	146	/* Connection refused */
+#define	EHOSTDOWN	147	/* Host is down */
+#define	EHOSTUNREACH	148	/* No route to host */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	EALREADY	149	/* Operation already in progress */
+#define	EINPROGRESS	150	/* Operation now in progress */
+#define	ESTALE		151	/* Stale NFS file handle */
+#define ECANCELED	158	/* AIO operation canceled */
+
+/*
+ * These error are Linux extensions.
+ */
+#define ENOMEDIUM	159	/* No medium found */
+#define EMEDIUMTYPE	160	/* Wrong medium type */
+#define	ENOKEY		161	/* Required key not available */
+#define	EKEYEXPIRED	162	/* Key has expired */
+#define	EKEYREVOKED	163	/* Key has been revoked */
+#define	EKEYREJECTED	164	/* Key was rejected by service */
+
+/* for robust mutexes */
+#define	EOWNERDEAD	165	/* Owner died */
+#define	ENOTRECOVERABLE	166	/* State not recoverable */
+
+#define EDQUOT		1133	/* Quota exceeded */
+
+#ifdef __KERNEL__
+
+/* The biggest error number defined here or in <linux/errno.h>. */
+#define EMAXERRNO	1133
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ERRNO_H */
diff --git a/arch/mips/include/asm/fb.h b/arch/mips/include/asm/fb.h
new file mode 100644
index 0000000..bd3f68c
--- /dev/null
+++ b/arch/mips/include/asm/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/mips/include/asm/fcntl.h b/arch/mips/include/asm/fcntl.h
new file mode 100644
index 0000000..2a52333
--- /dev/null
+++ b/arch/mips/include/asm/fcntl.h
@@ -0,0 +1,61 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2003, 05 Ralf Baechle
+ */
+#ifndef _ASM_FCNTL_H
+#define _ASM_FCNTL_H
+
+
+#define O_APPEND	0x0008
+#define O_SYNC		0x0010
+#define O_NONBLOCK	0x0080
+#define O_CREAT         0x0100	/* not fcntl */
+#define O_TRUNC		0x0200	/* not fcntl */
+#define O_EXCL		0x0400	/* not fcntl */
+#define O_NOCTTY	0x0800	/* not fcntl */
+#define FASYNC		0x1000	/* fcntl, for BSD compatibility */
+#define O_LARGEFILE	0x2000	/* allow large file opens */
+#define O_DIRECT	0x8000	/* direct disk access hint */
+
+#define F_GETLK		14
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	24	/*  for sockets. */
+#define F_GETOWN	23	/*  for sockets. */
+
+#ifndef __mips64
+#define F_GETLK64	33	/*  using 'struct flock64' */
+#define F_SETLK64	34
+#define F_SETLKW64	35
+#endif
+
+/*
+ * The flavours of struct flock.  "struct flock" is the ABI compliant
+ * variant.  Finally struct flock64 is the LFS variant of struct flock.  As
+ * a historic accident and inconsistence with the ABI definition it doesn't
+ * contain all the same fields as struct flock.
+ */
+
+#ifdef CONFIG_32BIT
+
+struct flock {
+	short	l_type;
+	short	l_whence;
+	off_t	l_start;
+	off_t	l_len;
+	long	l_sysid;
+	__kernel_pid_t l_pid;
+	long	pad[4];
+};
+
+#define HAVE_ARCH_STRUCT_FLOCK
+
+#endif /* CONFIG_32BIT */
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_FCNTL_H */
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
new file mode 100644
index 0000000..9cc8522
--- /dev/null
+++ b/arch/mips/include/asm/fixmap.h
@@ -0,0 +1,118 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#define FIX_N_COLOURS 8
+	FIX_CMAP_BEGIN,
+#ifdef CONFIG_MIPS_MT_SMTC
+	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS),
+#else
+	FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
+#endif
+#ifdef CONFIG_HIGHMEM
+	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_BEGIN = FIX_CMAP_END + 1,
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+#if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
+#define FIXADDR_TOP	((unsigned long)(long)(int)(0xff000000 - 0x20000))
+#else
+#define FIXADDR_TOP	((unsigned long)(long)(int)0xfffe0000)
+#endif
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+/*
+ * Called from pgtable_init()
+ */
+extern void fixrange_init(unsigned long start, unsigned long end,
+        pgd_t *pgd_base);
+
+
+#endif
diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h
new file mode 100644
index 0000000..992d232
--- /dev/null
+++ b/arch/mips/include/asm/floppy.h
@@ -0,0 +1,56 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 - 2000 Ralf Baechle
+ */
+#ifndef _ASM_FLOPPY_H
+#define _ASM_FLOPPY_H
+
+#include <linux/dma-mapping.h>
+
+static inline void fd_cacheflush(char * addr, long size)
+{
+	dma_cache_sync(NULL, addr, size, DMA_BIDIRECTIONAL);
+}
+
+#define MAX_BUFFER_SECTORS 24
+
+
+/*
+ * And on Mips's the CMOS info fails also ...
+ *
+ * FIXME: This information should come from the ARC configuration tree
+ *        or whereever a particular machine has stored this ...
+ */
+#define FLOPPY0_TYPE 		fd_drive_type(0)
+#define FLOPPY1_TYPE		fd_drive_type(1)
+
+#define FDC1			fd_getfdaddr1();
+
+#define N_FDC 1			/* do you *really* want a second controller? */
+#define N_DRIVE 8
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ *
+ * On MIPSes using vdma, this actually means that *all* transfers go thru
+ * the * track buffer since 0x1000000 is always smaller than KSEG0/1.
+ * Actually this needs to be a bit more complicated since the so much different
+ * hardware available with MIPS CPUs ...
+ */
+#define CROSS_64KB(a, s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)
+
+#define EXTRA_FLOPPY_PARAMS
+
+#include <floppy.h>
+
+#endif /* _ASM_FLOPPY_H */
diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h
new file mode 100644
index 0000000..2b5fddc
--- /dev/null
+++ b/arch/mips/include/asm/fpregdef.h
@@ -0,0 +1,99 @@
+/*
+ * Definitions for the FPU register names
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 Ralf Baechle
+ * Copyright (C) 1985 MIPS Computer Systems, Inc.
+ * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_FPREGDEF_H
+#define _ASM_FPREGDEF_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * These definitions only cover the R3000-ish 16/32 register model.
+ * But we're trying to be R3000 friendly anyway ...
+ */
+#define fv0	$f0      /* return value */
+#define fv0f	$f1
+#define fv1	$f2
+#define fv1f	$f3
+#define fa0	$f12     /* argument registers */
+#define fa0f	$f13
+#define fa1	$f14
+#define fa1f	$f15
+#define ft0	$f4      /* caller saved */
+#define ft0f	$f5
+#define ft1	$f6
+#define ft1f	$f7
+#define ft2	$f8
+#define ft2f	$f9
+#define ft3	$f10
+#define ft3f	$f11
+#define ft4	$f16
+#define ft4f	$f17
+#define ft5	$f18
+#define ft5f	$f19
+#define fs0	$f20     /* callee saved */
+#define fs0f	$f21
+#define fs1	$f22
+#define fs1f	$f23
+#define fs2	$f24
+#define fs2f	$f25
+#define fs3	$f26
+#define fs3f	$f27
+#define fs4	$f28
+#define fs4f	$f29
+#define fs5	$f30
+#define fs5f	$f31
+
+#define fcr31	$31      /* FPU status register */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define fv0	$f0	/* return value */
+#define fv1	$f2
+#define fa0	$f12	/* argument registers */
+#define fa1	$f13
+#define fa2	$f14
+#define fa3	$f15
+#define fa4	$f16
+#define fa5	$f17
+#define fa6	$f18
+#define fa7	$f19
+#define ft0	$f4	/* caller saved */
+#define ft1	$f5
+#define ft2	$f6
+#define ft3	$f7
+#define ft4	$f8
+#define ft5	$f9
+#define ft6	$f10
+#define ft7	$f11
+#define ft8	$f20
+#define ft9	$f21
+#define ft10	$f22
+#define ft11	$f23
+#define ft12	$f1
+#define ft13	$f3
+#define fs0	$f24	/* callee saved */
+#define fs1	$f25
+#define fs2	$f26
+#define fs3	$f27
+#define fs4	$f28
+#define fs5	$f29
+#define fs6	$f30
+#define fs7	$f31
+
+#define fcr31	$31
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_FPREGDEF_H */
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
new file mode 100644
index 0000000..8a3ef24
--- /dev/null
+++ b/arch/mips/include/asm/fpu.h
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2002 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+
+#include <linux/sched.h>
+#include <linux/thread_info.h>
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/hazards.h>
+#include <asm/processor.h>
+#include <asm/current.h>
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+#include <asm/mips_mt.h>
+#endif
+
+struct sigcontext;
+struct sigcontext32;
+
+extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc);
+extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc);
+
+extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc);
+extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc);
+
+extern void fpu_emulator_init_fpu(void);
+extern int fpu_emulator_save_context(struct sigcontext __user *sc);
+extern int fpu_emulator_restore_context(struct sigcontext __user *sc);
+extern void _init_fpu(void);
+extern void _save_fp(struct task_struct *);
+extern void _restore_fp(struct task_struct *);
+
+#define __enable_fpu()							\
+do {									\
+        set_c0_status(ST0_CU1);						\
+        enable_fpu_hazard();						\
+} while (0)
+
+#define __disable_fpu()							\
+do {									\
+	clear_c0_status(ST0_CU1);					\
+        disable_fpu_hazard();						\
+} while (0)
+
+#define enable_fpu()							\
+do {									\
+	if (cpu_has_fpu)						\
+		__enable_fpu();						\
+} while (0)
+
+#define disable_fpu()							\
+do {									\
+	if (cpu_has_fpu)						\
+		__disable_fpu();					\
+} while (0)
+
+
+#define clear_fpu_owner()	clear_thread_flag(TIF_USEDFPU)
+
+static inline int __is_fpu_owner(void)
+{
+	return test_thread_flag(TIF_USEDFPU);
+}
+
+static inline int is_fpu_owner(void)
+{
+	return cpu_has_fpu && __is_fpu_owner();
+}
+
+static inline void __own_fpu(void)
+{
+	__enable_fpu();
+	KSTK_STATUS(current) |= ST0_CU1;
+	set_thread_flag(TIF_USEDFPU);
+}
+
+static inline void own_fpu_inatomic(int restore)
+{
+	if (cpu_has_fpu && !__is_fpu_owner()) {
+		__own_fpu();
+		if (restore)
+			_restore_fp(current);
+	}
+}
+
+static inline void own_fpu(int restore)
+{
+	preempt_disable();
+	own_fpu_inatomic(restore);
+	preempt_enable();
+}
+
+static inline void lose_fpu(int save)
+{
+	preempt_disable();
+	if (is_fpu_owner()) {
+		if (save)
+			_save_fp(current);
+		KSTK_STATUS(current) &= ~ST0_CU1;
+		clear_thread_flag(TIF_USEDFPU);
+		__disable_fpu();
+	}
+	preempt_enable();
+}
+
+static inline void init_fpu(void)
+{
+	preempt_disable();
+	if (cpu_has_fpu) {
+		__own_fpu();
+		_init_fpu();
+	} else {
+		fpu_emulator_init_fpu();
+	}
+	preempt_enable();
+}
+
+static inline void save_fp(struct task_struct *tsk)
+{
+	if (cpu_has_fpu)
+		_save_fp(tsk);
+}
+
+static inline void restore_fp(struct task_struct *tsk)
+{
+	if (cpu_has_fpu)
+		_restore_fp(tsk);
+}
+
+static inline fpureg_t *get_fpu_regs(struct task_struct *tsk)
+{
+	if (tsk == current) {
+		preempt_disable();
+		if (is_fpu_owner())
+			_save_fp(current);
+		preempt_enable();
+	}
+
+	return tsk->thread.fpu.fpr;
+}
+
+#endif /* _ASM_FPU_H */
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
new file mode 100644
index 0000000..2731c38
--- /dev/null
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -0,0 +1,37 @@
+/*
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Further private data for which no space exists in mips_fpu_struct.
+ * This should be subsumed into the mips_fpu_struct structure as
+ * defined in processor.h as soon as the absurd wired absolute assembler
+ * offsets become dynamic at compile time.
+ *
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ */
+#ifndef _ASM_FPU_EMULATOR_H
+#define _ASM_FPU_EMULATOR_H
+
+struct mips_fpu_emulator_stats {
+	unsigned int emulated;
+	unsigned int loads;
+	unsigned int stores;
+	unsigned int cp1ops;
+	unsigned int cp1xops;
+	unsigned int errors;
+};
+
+extern struct mips_fpu_emulator_stats fpuemustats;
+
+#endif /* _ASM_FPU_EMULATOR_H */
diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h
new file mode 100644
index 0000000..b9cce90
--- /dev/null
+++ b/arch/mips/include/asm/futex.h
@@ -0,0 +1,203 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2006  Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/barrier.h>
+#include <asm/errno.h>
+#include <asm/war.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)		\
+{									\
+	if (cpu_has_llsc && R10000_LLSC_WAR) {				\
+		__asm__ __volatile__(					\
+		"	.set	push				\n"	\
+		"	.set	noat				\n"	\
+		"	.set	mips3				\n"	\
+		"1:	ll	%1, %4	# __futex_atomic_op	\n"	\
+		"	.set	mips0				\n"	\
+		"	" insn	"				\n"	\
+		"	.set	mips3				\n"	\
+		"2:	sc	$1, %2				\n"	\
+		"	beqzl	$1, 1b				\n"	\
+		__WEAK_LLSC_MB						\
+		"3:						\n"	\
+		"	.set	pop				\n"	\
+		"	.set	mips0				\n"	\
+		"	.section .fixup,\"ax\"			\n"	\
+		"4:	li	%0, %6				\n"	\
+		"	j	3b				\n"	\
+		"	.previous				\n"	\
+		"	.section __ex_table,\"a\"		\n"	\
+		"	"__UA_ADDR "\t1b, 4b			\n"	\
+		"	"__UA_ADDR "\t2b, 4b			\n"	\
+		"	.previous				\n"	\
+		: "=r" (ret), "=&r" (oldval), "=R" (*uaddr)		\
+		: "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT)	\
+		: "memory");						\
+	} else if (cpu_has_llsc) {					\
+		__asm__ __volatile__(					\
+		"	.set	push				\n"	\
+		"	.set	noat				\n"	\
+		"	.set	mips3				\n"	\
+		"1:	ll	%1, %4	# __futex_atomic_op	\n"	\
+		"	.set	mips0				\n"	\
+		"	" insn	"				\n"	\
+		"	.set	mips3				\n"	\
+		"2:	sc	$1, %2				\n"	\
+		"	beqz	$1, 1b				\n"	\
+		__WEAK_LLSC_MB						\
+		"3:						\n"	\
+		"	.set	pop				\n"	\
+		"	.set	mips0				\n"	\
+		"	.section .fixup,\"ax\"			\n"	\
+		"4:	li	%0, %6				\n"	\
+		"	j	3b				\n"	\
+		"	.previous				\n"	\
+		"	.section __ex_table,\"a\"		\n"	\
+		"	"__UA_ADDR "\t1b, 4b			\n"	\
+		"	"__UA_ADDR "\t2b, 4b			\n"	\
+		"	.previous				\n"	\
+		: "=r" (ret), "=&r" (oldval), "=R" (*uaddr)		\
+		: "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT)	\
+		: "memory");						\
+	} else								\
+		ret = -ENOSYS;						\
+}
+
+static inline int
+futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("move	$1, %z5", ret, oldval, uaddr, oparg);
+		break;
+
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("addu	$1, %1, %z5",
+		                  ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or	$1, %1, %z5",
+		                  ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("and	$1, %1, %z5",
+		                  ret, oldval, uaddr, ~oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor	$1, %1, %z5",
+		                  ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int retval;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"# futex_atomic_cmpxchg_inatomic			\n"
+		"	.set	push					\n"
+		"	.set	noat					\n"
+		"	.set	mips3					\n"
+		"1:	ll	%0, %2					\n"
+		"	bne	%0, %z3, 3f				\n"
+		"	.set	mips0					\n"
+		"	move	$1, %z4					\n"
+		"	.set	mips3					\n"
+		"2:	sc	$1, %1					\n"
+		"	beqzl	$1, 1b					\n"
+		__WEAK_LLSC_MB
+		"3:							\n"
+		"	.set	pop					\n"
+		"	.section .fixup,\"ax\"				\n"
+		"4:	li	%0, %5					\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"__UA_ADDR "\t1b, 4b				\n"
+		"	"__UA_ADDR "\t2b, 4b				\n"
+		"	.previous					\n"
+		: "=&r" (retval), "=R" (*uaddr)
+		: "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"# futex_atomic_cmpxchg_inatomic			\n"
+		"	.set	push					\n"
+		"	.set	noat					\n"
+		"	.set	mips3					\n"
+		"1:	ll	%0, %2					\n"
+		"	bne	%0, %z3, 3f				\n"
+		"	.set	mips0					\n"
+		"	move	$1, %z4					\n"
+		"	.set	mips3					\n"
+		"2:	sc	$1, %1					\n"
+		"	beqz	$1, 1b					\n"
+		__WEAK_LLSC_MB
+		"3:							\n"
+		"	.set	pop					\n"
+		"	.section .fixup,\"ax\"				\n"
+		"4:	li	%0, %5					\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"__UA_ADDR "\t1b, 4b				\n"
+		"	"__UA_ADDR "\t2b, 4b				\n"
+		"	.previous					\n"
+		: "=&r" (retval), "=R" (*uaddr)
+		: "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+		: "memory");
+	} else
+		return -ENOSYS;
+
+	return retval;
+}
+
+#endif
+#endif /* _ASM_FUTEX_H */
diff --git a/arch/mips/include/asm/fw/arc/hinv.h b/arch/mips/include/asm/fw/arc/hinv.h
new file mode 100644
index 0000000..e6ff4ad
--- /dev/null
+++ b/arch/mips/include/asm/fw/arc/hinv.h
@@ -0,0 +1,175 @@
+/*
+ * ARCS hardware/memory inventory/configuration and system ID definitions.
+ */
+#ifndef _ASM_ARC_HINV_H
+#define _ASM_ARC_HINV_H
+
+#include <asm/sgidefs.h>
+#include <asm/fw/arc/types.h>
+
+/* configuration query defines */
+typedef enum configclass {
+	SystemClass,
+	ProcessorClass,
+	CacheClass,
+#ifndef	_NT_PROM
+	MemoryClass,
+	AdapterClass,
+	ControllerClass,
+	PeripheralClass
+#else	/* _NT_PROM */
+	AdapterClass,
+	ControllerClass,
+	PeripheralClass,
+	MemoryClass
+#endif	/* _NT_PROM */
+} CONFIGCLASS;
+
+typedef enum configtype {
+	ARC,
+	CPU,
+	FPU,
+	PrimaryICache,
+	PrimaryDCache,
+	SecondaryICache,
+	SecondaryDCache,
+	SecondaryCache,
+#ifndef	_NT_PROM
+	Memory,
+#endif
+	EISAAdapter,
+	TCAdapter,
+	SCSIAdapter,
+	DTIAdapter,
+	MultiFunctionAdapter,
+	DiskController,
+	TapeController,
+	CDROMController,
+	WORMController,
+	SerialController,
+	NetworkController,
+	DisplayController,
+	ParallelController,
+	PointerController,
+	KeyboardController,
+	AudioController,
+	OtherController,
+	DiskPeripheral,
+	FloppyDiskPeripheral,
+	TapePeripheral,
+	ModemPeripheral,
+	MonitorPeripheral,
+	PrinterPeripheral,
+	PointerPeripheral,
+	KeyboardPeripheral,
+	TerminalPeripheral,
+	LinePeripheral,
+	NetworkPeripheral,
+#ifdef	_NT_PROM
+	Memory,
+#endif
+	OtherPeripheral,
+
+	/* new stuff for IP30 */
+	/* added without moving anything */
+	/* except ANONYMOUS. */
+
+	XTalkAdapter,
+	PCIAdapter,
+	GIOAdapter,
+	TPUAdapter,
+
+	Anonymous
+} CONFIGTYPE;
+
+typedef enum {
+	Failed = 1,
+	ReadOnly = 2,
+	Removable = 4,
+	ConsoleIn = 8,
+	ConsoleOut = 16,
+	Input = 32,
+	Output = 64
+} IDENTIFIERFLAG;
+
+#ifndef NULL			/* for GetChild(NULL); */
+#define	NULL	0
+#endif
+
+union key_u {
+	struct {
+#ifdef	_MIPSEB
+		unsigned char  c_bsize;		/* block size in lines */
+		unsigned char  c_lsize;		/* line size in bytes/tag */
+		unsigned short c_size;		/* cache size in 4K pages */
+#else	/* _MIPSEL */
+		unsigned short c_size;		/* cache size in 4K pages */
+		unsigned char  c_lsize;		/* line size in bytes/tag */
+		unsigned char  c_bsize;		/* block size in lines */
+#endif	/* _MIPSEL */
+	} cache;
+	ULONG FullKey;
+};
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+#define SGI_ARCS_VERS	64			/* sgi 64-bit version */
+#define SGI_ARCS_REV	0			/* rev .00 */
+#else
+#define SGI_ARCS_VERS	1			/* first version */
+#define SGI_ARCS_REV	10			/* rev .10, 3/04/92 */
+#endif
+
+typedef struct component {
+	CONFIGCLASS	Class;
+	CONFIGTYPE	Type;
+	IDENTIFIERFLAG	Flags;
+	USHORT		Version;
+	USHORT		Revision;
+	ULONG 		Key;
+	ULONG		AffinityMask;
+	ULONG		ConfigurationDataSize;
+	ULONG		IdentifierLength;
+	char		*Identifier;
+} COMPONENT;
+
+/* internal structure that holds pathname parsing data */
+struct cfgdata {
+	char *name;			/* full name */
+	int minlen;			/* minimum length to match */
+	CONFIGTYPE type;		/* type of token */
+};
+
+/* System ID */
+typedef struct systemid {
+	CHAR VendorId[8];
+	CHAR ProductId[8];
+} SYSTEMID;
+
+/* memory query functions */
+typedef enum memorytype {
+	ExceptionBlock,
+	SPBPage,			/* ARCS == SystemParameterBlock */
+#ifndef	_NT_PROM
+	FreeContiguous,
+	FreeMemory,
+	BadMemory,
+	LoadedProgram,
+	FirmwareTemporary,
+	FirmwarePermanent
+#else	/* _NT_PROM */
+	FreeMemory,
+	BadMemory,
+	LoadedProgram,
+	FirmwareTemporary,
+	FirmwarePermanent,
+	FreeContiguous
+#endif	/* _NT_PROM */
+} MEMORYTYPE;
+
+typedef struct memorydescriptor {
+	MEMORYTYPE	Type;
+	LONG		BasePage;
+	LONG		PageCount;
+} MEMORYDESCRIPTOR;
+
+#endif /* _ASM_ARC_HINV_H */
diff --git a/arch/mips/include/asm/fw/arc/types.h b/arch/mips/include/asm/fw/arc/types.h
new file mode 100644
index 0000000..b9adcd6f
--- /dev/null
+++ b/arch/mips/include/asm/fw/arc/types.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 1999 Ralf Baechle (ralf@gnu.org)
+ * Copyright 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ARC_TYPES_H
+#define _ASM_ARC_TYPES_H
+
+
+#ifdef CONFIG_ARC32
+
+typedef char		CHAR;
+typedef short		SHORT;
+typedef long		LARGE_INTEGER __attribute__ ((__mode__ (__DI__)));
+typedef	long		LONG __attribute__ ((__mode__ (__SI__)));
+typedef unsigned char	UCHAR;
+typedef unsigned short	USHORT;
+typedef unsigned long	ULONG __attribute__ ((__mode__ (__SI__)));
+typedef void		VOID;
+
+/* The pointer types.  Note that we're using a 64-bit compiler but all
+   pointer in the ARC structures are only 32-bit, so we need some disgusting
+   workarounds.  Keep your vomit bag handy.  */
+typedef LONG		_PCHAR;
+typedef LONG		_PSHORT;
+typedef LONG		_PLARGE_INTEGER;
+typedef	LONG		_PLONG;
+typedef LONG		_PUCHAR;
+typedef LONG		_PUSHORT;
+typedef LONG		_PULONG;
+typedef LONG		_PVOID;
+
+#endif /* CONFIG_ARC32 */
+
+#ifdef CONFIG_ARC64
+
+typedef char		CHAR;
+typedef short		SHORT;
+typedef long		LARGE_INTEGER __attribute__ ((__mode__ (__DI__)));
+typedef	long		LONG __attribute__ ((__mode__ (__DI__)));
+typedef unsigned char	UCHAR;
+typedef unsigned short	USHORT;
+typedef unsigned long	ULONG __attribute__ ((__mode__ (__DI__)));
+typedef void		VOID;
+
+/* The pointer types.  We're 64-bit and the firmware is also 64-bit, so
+   live is sane ...  */
+typedef CHAR		*_PCHAR;
+typedef SHORT		*_PSHORT;
+typedef LARGE_INTEGER	*_PLARGE_INTEGER;
+typedef	LONG		*_PLONG;
+typedef UCHAR		*_PUCHAR;
+typedef USHORT		*_PUSHORT;
+typedef ULONG		*_PULONG;
+typedef VOID		*_PVOID;
+
+#endif /* CONFIG_ARC64  */
+
+typedef CHAR		*PCHAR;
+typedef SHORT		*PSHORT;
+typedef LARGE_INTEGER	*PLARGE_INTEGER;
+typedef	LONG		*PLONG;
+typedef UCHAR		*PUCHAR;
+typedef USHORT		*PUSHORT;
+typedef ULONG		*PULONG;
+typedef VOID		*PVOID;
+
+/*
+ * Return type of ArcGetDisplayStatus()
+ */
+typedef struct {
+	USHORT	CursorXPosition;
+	USHORT	CursorYPosition;
+	USHORT	CursorMaxXPosition;
+	USHORT	CursorMaxYPosition;
+	USHORT	ForegroundColor;
+	USHORT	BackgroundColor;
+	UCHAR	HighIntensity;
+	UCHAR	Underscored;
+	UCHAR	ReverseVideo;
+} DISPLAY_STATUS;
+
+#endif /* _ASM_ARC_TYPES_H */
diff --git a/arch/mips/include/asm/fw/cfe/cfe_api.h b/arch/mips/include/asm/fw/cfe/cfe_api.h
new file mode 100644
index 0000000..0995575
--- /dev/null
+++ b/arch/mips/include/asm/fw/cfe/cfe_api.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+/*
+ * Broadcom Common Firmware Environment (CFE)
+ *
+ * This file contains declarations for doing callbacks to
+ * cfe from an application.  It should be the only header
+ * needed by the application to use this library
+ *
+ * Authors:  Mitch Lichtenberg, Chris Demetriou
+ */
+#ifndef CFE_API_H
+#define CFE_API_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+typedef long intptr_t;
+
+
+/*
+ * Constants
+ */
+
+/* Seal indicating CFE's presence, passed to user program. */
+#define CFE_EPTSEAL 0x43464531
+
+#define CFE_MI_RESERVED	0	/* memory is reserved, do not use */
+#define CFE_MI_AVAILABLE 1	/* memory is available */
+
+#define CFE_FLG_WARMSTART     0x00000001
+#define CFE_FLG_FULL_ARENA    0x00000001
+#define CFE_FLG_ENV_PERMANENT 0x00000001
+
+#define CFE_CPU_CMD_START 1
+#define CFE_CPU_CMD_STOP 0
+
+#define CFE_STDHANDLE_CONSOLE	0
+
+#define CFE_DEV_NETWORK 	1
+#define CFE_DEV_DISK		2
+#define CFE_DEV_FLASH		3
+#define CFE_DEV_SERIAL		4
+#define CFE_DEV_CPU		5
+#define CFE_DEV_NVRAM		6
+#define CFE_DEV_CLOCK           7
+#define CFE_DEV_OTHER		8
+#define CFE_DEV_MASK		0x0F
+
+#define CFE_CACHE_FLUSH_D	1
+#define CFE_CACHE_INVAL_I	2
+#define CFE_CACHE_INVAL_D	4
+#define CFE_CACHE_INVAL_L2	8
+
+#define CFE_FWI_64BIT		0x00000001
+#define CFE_FWI_32BIT		0x00000002
+#define CFE_FWI_RELOC		0x00000004
+#define CFE_FWI_UNCACHED	0x00000008
+#define CFE_FWI_MULTICPU	0x00000010
+#define CFE_FWI_FUNCSIM		0x00000020
+#define CFE_FWI_RTLSIM		0x00000040
+
+typedef struct {
+	int64_t fwi_version;		/* major, minor, eco version */
+	int64_t fwi_totalmem;		/* total installed mem */
+	int64_t fwi_flags;		/* various flags */
+	int64_t fwi_boardid;		/* board ID */
+	int64_t fwi_bootarea_va;	/* VA of boot area */
+	int64_t fwi_bootarea_pa;	/* PA of boot area */
+	int64_t fwi_bootarea_size;	/* size of boot area */
+} cfe_fwinfo_t;
+
+
+/*
+ * Defines and prototypes for functions which take no arguments.
+ */
+int64_t cfe_getticks(void);
+
+/*
+ * Defines and prototypes for the rest of the functions.
+ */
+int cfe_close(int handle);
+int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1);
+int cfe_cpu_stop(int cpu);
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen);
+int cfe_enummem(int idx, int flags, uint64_t * start, uint64_t * length,
+		uint64_t * type);
+int cfe_exit(int warm, int status);
+int cfe_flushcache(int flg);
+int cfe_getdevinfo(char *name);
+int cfe_getenv(char *name, char *dest, int destlen);
+int cfe_getfwinfo(cfe_fwinfo_t * info);
+int cfe_getstdhandle(int flg);
+int cfe_init(uint64_t handle, uint64_t ept);
+int cfe_inpstat(int handle);
+int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
+	      int length, int *retlen, uint64_t offset);
+int cfe_open(char *name);
+int cfe_read(int handle, unsigned char *buffer, int length);
+int cfe_readblk(int handle, int64_t offset, unsigned char *buffer,
+		int length);
+int cfe_setenv(char *name, char *val);
+int cfe_write(int handle, unsigned char *buffer, int length);
+int cfe_writeblk(int handle, int64_t offset, unsigned char *buffer,
+		 int length);
+
+#endif				/* CFE_API_H */
diff --git a/arch/mips/include/asm/fw/cfe/cfe_error.h b/arch/mips/include/asm/fw/cfe/cfe_error.h
new file mode 100644
index 0000000..b803746
--- /dev/null
+++ b/arch/mips/include/asm/fw/cfe/cfe_error.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * Broadcom Common Firmware Environment (CFE)
+ *
+ * CFE's global error code list is here.
+ *
+ * Author:  Mitch Lichtenberg
+ */
+
+#define CFE_OK			 0
+#define CFE_ERR                 -1	/* generic error */
+#define CFE_ERR_INV_COMMAND	-2
+#define CFE_ERR_EOF		-3
+#define CFE_ERR_IOERR		-4
+#define CFE_ERR_NOMEM		-5
+#define CFE_ERR_DEVNOTFOUND	-6
+#define CFE_ERR_DEVOPEN		-7
+#define CFE_ERR_INV_PARAM	-8
+#define CFE_ERR_ENVNOTFOUND	-9
+#define CFE_ERR_ENVREADONLY	-10
+
+#define CFE_ERR_NOTELF		-11
+#define CFE_ERR_NOT32BIT 	-12
+#define CFE_ERR_WRONGENDIAN 	-13
+#define CFE_ERR_BADELFVERS 	-14
+#define CFE_ERR_NOTMIPS 	-15
+#define CFE_ERR_BADELFFMT 	-16
+#define CFE_ERR_BADADDR 	-17
+
+#define CFE_ERR_FILENOTFOUND	-18
+#define CFE_ERR_UNSUPPORTED	-19
+
+#define CFE_ERR_HOSTUNKNOWN	-20
+
+#define CFE_ERR_TIMEOUT		-21
+
+#define CFE_ERR_PROTOCOLERR	-22
+
+#define CFE_ERR_NETDOWN		-23
+#define CFE_ERR_NONAMESERVER	-24
+
+#define CFE_ERR_NOHANDLES	-25
+#define CFE_ERR_ALREADYBOUND	-26
+
+#define CFE_ERR_CANNOTSET	-27
+#define CFE_ERR_NOMORE		-28
+#define CFE_ERR_BADFILESYS	-29
+#define CFE_ERR_FSNOTAVAIL	-30
+
+#define CFE_ERR_INVBOOTBLOCK	-31
+#define CFE_ERR_WRONGDEVTYPE	-32
+#define CFE_ERR_BBCHECKSUM	-33
+#define CFE_ERR_BOOTPROGCHKSUM	-34
+
+#define CFE_ERR_LDRNOTAVAIL	-35
+
+#define CFE_ERR_NOTREADY	-36
+
+#define CFE_ERR_GETMEM          -37
+#define CFE_ERR_SETMEM          -38
+
+#define CFE_ERR_NOTCONN		-39
+#define CFE_ERR_ADDRINUSE	-40
diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
new file mode 100644
index 0000000..d74a8a4
--- /dev/null
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -0,0 +1,117 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ *
+ * Multiprocessor Subsystem Register Definitions
+ *
+ */
+#ifndef _ASM_GCMPREGS_H
+#define _ASM_GCMPREGS_H
+
+
+/* Offsets to major blocks within GCMP from GCMP base */
+#define GCMP_GCB_OFS		0x0000 /* Global Control Block */
+#define GCMP_CLCB_OFS		0x2000 /* Core Local Control Block */
+#define GCMP_COCB_OFS		0x4000 /* Core Other Control Block */
+#define GCMP_GDB_OFS		0x8000 /* Global Debug Block */
+
+/* Offsets to individual GCMP registers from GCMP base */
+#define GCMPOFS(block, tag, reg)	(GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS)
+
+#define GCMPGCBOFS(reg)		GCMPOFS(GCB, GCB, reg)
+#define GCMPCLCBOFS(reg)	GCMPOFS(CLCB, CCB, reg)
+#define GCMPCOCBOFS(reg)	GCMPOFS(COCB, CCB, reg)
+#define GCMPGDBOFS(reg)		GCMPOFS(GDB, GDB, reg)
+
+/* GCMP register access */
+#define GCMPGCB(reg)			REGP(_gcmp_base, GCMPGCBOFS(reg))
+#define GCMPCLCB(reg)			REGP(_gcmp_base, GCMPCLCBOFS(reg))
+#define GCMPCOCB(reg)			REGP(_gcmp_base, GCMPCOCBOFS(reg))
+#define GCMPGDB(reg)			REGP(_gcmp_base, GCMPGDBOFS(reg))
+
+/* Mask generation */
+#define GCMPMSK(block, reg, bits)	(MSK(bits)<<GCMP_##block##_##reg##_SHF)
+#define GCMPGCBMSK(reg, bits)		GCMPMSK(GCB, reg, bits)
+#define GCMPCCBMSK(reg, bits)		GCMPMSK(CCB, reg, bits)
+#define GCMPGDBMSK(reg, bits)		GCMPMSK(GDB, reg, bits)
+
+/* GCB registers */
+#define GCMP_GCB_GC_OFS			0x0000	/* Global Config Register */
+#define  GCMP_GCB_GC_NUMIOCU_SHF	8
+#define  GCMP_GCB_GC_NUMIOCU_MSK	GCMPGCBMSK(GC_NUMIOCU, 4)
+#define  GCMP_GCB_GC_NUMCORES_SHF	0
+#define  GCMP_GCB_GC_NUMCORES_MSK	GCMPGCBMSK(GC_NUMCORES, 8)
+#define GCMP_GCB_GCMPB_OFS		0x0008		/* Global GCMP Base */
+#define  GCMP_GCB_GCMPB_GCMPBASE_SHF	15
+#define  GCMP_GCB_GCMPB_GCMPBASE_MSK	GCMPGCBMSK(GCMPB_GCMPBASE, 17)
+#define  GCMP_GCB_GCMPB_CMDEFTGT_SHF	0
+#define  GCMP_GCB_GCMPB_CMDEFTGT_MSK	GCMPGCBMSK(GCMPB_CMDEFTGT, 2)
+#define  GCMP_GCB_GCMPB_CMDEFTGT_MEM	0
+#define  GCMP_GCB_GCMPB_CMDEFTGT_MEM1	1
+#define  GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2
+#define  GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3
+#define GCMP_GCB_CCMC_OFS		0x0010	/* Global CM Control */
+#define GCMP_GCB_GCSRAP_OFS		0x0020	/* Global CSR Access Privilege */
+#define  GCMP_GCB_GCSRAP_CMACCESS_SHF	0
+#define  GCMP_GCB_GCSRAP_CMACCESS_MSK	GCMPGCBMSK(GCSRAP_CMACCESS, 8)
+#define GCMP_GCB_GCMPREV_OFS		0x0030	/* GCMP Revision Register */
+#define GCMP_GCB_GCMEM_OFS		0x0040	/* Global CM Error Mask */
+#define GCMP_GCB_GCMEC_OFS		0x0048	/* Global CM Error Cause */
+#define  GCMP_GCB_GMEC_ERROR_TYPE_SHF	27
+#define  GCMP_GCB_GMEC_ERROR_TYPE_MSK	GCMPGCBMSK(GMEC_ERROR_TYPE, 5)
+#define  GCMP_GCB_GMEC_ERROR_INFO_SHF	0
+#define  GCMP_GCB_GMEC_ERROR_INFO_MSK	GCMPGCBMSK(GMEC_ERROR_INFO, 27)
+#define GCMP_GCB_GCMEA_OFS		0x0050	/* Global CM Error Address */
+#define GCMP_GCB_GCMEO_OFS		0x0058	/* Global CM Error Multiple */
+#define  GCMP_GCB_GMEO_ERROR_2ND_SHF	0
+#define  GCMP_GCB_GMEO_ERROR_2ND_MSK	GCMPGCBMSK(GMEO_ERROR_2ND, 5)
+#define GCMP_GCB_GICBA_OFS		0x0080	/* Global Interrupt Controller Base Address */
+#define  GCMP_GCB_GICBA_BASE_SHF	17
+#define  GCMP_GCB_GICBA_BASE_MSK	GCMPGCBMSK(GICBA_BASE, 15)
+#define  GCMP_GCB_GICBA_EN_SHF		0
+#define  GCMP_GCB_GICBA_EN_MSK		GCMPGCBMSK(GICBA_EN, 1)
+
+/* GCB Regions */
+#define GCMP_GCB_CMxBASE_OFS(n)		(0x0090+16*(n))		/* Global Region[0-3] Base Address */
+#define  GCMP_GCB_CMxBASE_BASE_SHF	16
+#define  GCMP_GCB_CMxBASE_BASE_MSK	GCMPGCBMSK(CMxBASE_BASE, 16)
+#define GCMP_GCB_CMxMASK_OFS(n)		(0x0098+16*(n))		/* Global Region[0-3] Address Mask */
+#define  GCMP_GCB_CMxMASK_MASK_SHF	16
+#define  GCMP_GCB_CMxMASK_MASK_MSK	GCMPGCBMSK(CMxMASK_MASK, 16)
+#define  GCMP_GCB_CMxMASK_CMREGTGT_SHF	0
+#define  GCMP_GCB_CMxMASK_CMREGTGT_MSK	GCMPGCBMSK(CMxMASK_CMREGTGT, 2)
+#define  GCMP_GCB_CMxMASK_CMREGTGT_MEM	 0
+#define  GCMP_GCB_CMxMASK_CMREGTGT_MEM1  1
+#define  GCMP_GCB_CMxMASK_CMREGTGT_IOCU1 2
+#define  GCMP_GCB_CMxMASK_CMREGTGT_IOCU2 3
+
+
+/* Core local/Core other control block registers */
+#define GCMP_CCB_RESETR_OFS		0x0000			/* Reset Release */
+#define  GCMP_CCB_RESETR_INRESET_SHF	0
+#define  GCMP_CCB_RESETR_INRESET_MSK	GCMPCCBMSK(RESETR_INRESET, 16)
+#define GCMP_CCB_COHCTL_OFS		0x0008			/* Coherence Control */
+#define  GCMP_CCB_COHCTL_DOMAIN_SHF	0
+#define  GCMP_CCB_COHCTL_DOMAIN_MSK	GCMPCCBMSK(COHCTL_DOMAIN, 8)
+#define GCMP_CCB_CFG_OFS		0x0010			/* Config */
+#define  GCMP_CCB_CFG_IOCUTYPE_SHF	10
+#define  GCMP_CCB_CFG_IOCUTYPE_MSK	GCMPCCBMSK(CFG_IOCUTYPE, 2)
+#define   GCMP_CCB_CFG_IOCUTYPE_CPU	0
+#define   GCMP_CCB_CFG_IOCUTYPE_NCIOCU	1
+#define   GCMP_CCB_CFG_IOCUTYPE_CIOCU	2
+#define  GCMP_CCB_CFG_NUMVPE_SHF	0
+#define  GCMP_CCB_CFG_NUMVPE_MSK	GCMPCCBMSK(CFG_NUMVPE, 10)
+#define GCMP_CCB_OTHER_OFS		0x0018		/* Other Address */
+#define  GCMP_CCB_OTHER_CORENUM_SHF	16
+#define  GCMP_CCB_OTHER_CORENUM_MSK	GCMPCCBMSK(OTHER_CORENUM, 16)
+#define GCMP_CCB_RESETBASE_OFS		0x0020		/* Reset Exception Base */
+#define  GCMP_CCB_RESETBASE_BEV_SHF	12
+#define  GCMP_CCB_RESETBASE_BEV_MSK	GCMPCCBMSK(RESETBASE_BEV, 20)
+#define GCMP_CCB_ID_OFS			0x0028		/* Identification */
+#define GCMP_CCB_DINTGROUP_OFS		0x0030		/* DINT Group Participate */
+#define GCMP_CCB_DBGGROUP_OFS		0x0100		/* DebugBreak Group */
+
+#endif /* _ASM_GCMPREGS_H */
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
new file mode 100644
index 0000000..954807d
--- /dev/null
+++ b/arch/mips/include/asm/gic.h
@@ -0,0 +1,487 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ *
+ * GIC Register Definitions
+ *
+ */
+#ifndef _ASM_GICREGS_H
+#define _ASM_GICREGS_H
+
+#undef	GICISBYTELITTLEENDIAN
+#define GICISWORDLITTLEENDIAN
+
+/* Constants */
+#define GIC_POL_POS			1
+#define GIC_POL_NEG			0
+#define GIC_TRIG_EDGE			1
+#define GIC_TRIG_LEVEL			0
+
+#define GIC_NUM_INTRS			32
+
+#define MSK(n) ((1 << (n)) - 1)
+#define REG32(addr)		(*(volatile unsigned int *) (addr))
+#define REG(base, offs)		REG32((unsigned long)(base) + offs##_##OFS)
+#define REGP(base, phys)	REG32((unsigned long)(base) + (phys))
+
+/* Accessors */
+#define GIC_REG(segment, offset) \
+	REG32(_gic_base + segment##_##SECTION_OFS + offset##_##OFS)
+#define GIC_REG_ADDR(segment, offset) \
+	REG32(_gic_base + segment##_##SECTION_OFS + offset)
+
+#define GIC_ABS_REG(segment, offset) \
+       (_gic_base + segment##_##SECTION_OFS + offset##_##OFS)
+#define GIC_REG_ABS_ADDR(segment, offset) \
+       (_gic_base + segment##_##SECTION_OFS + offset)
+
+#ifdef GICISBYTELITTLEENDIAN
+#define GICREAD(reg, data)	(data) = (reg), (data) = le32_to_cpu(data)
+#define GICWRITE(reg, data)	(reg) = cpu_to_le32(data)
+#define GICBIS(reg, bits)			\
+	({unsigned int data;			\
+		GICREAD(reg, data);		\
+		data |= bits;			\
+		GICWRITE(reg, data);		\
+	})
+
+#else
+#define GICREAD(reg, data)	(data) = (reg)
+#define GICWRITE(reg, data)	(reg) = (data)
+#define GICBIS(reg, bits)	(reg) |= (bits)
+#endif
+
+
+/* GIC Address Space */
+#define SHARED_SECTION_OFS		0x0000
+#define SHARED_SECTION_SIZE		0x8000
+#define VPE_LOCAL_SECTION_OFS		0x8000
+#define VPE_LOCAL_SECTION_SIZE		0x4000
+#define VPE_OTHER_SECTION_OFS		0xc000
+#define VPE_OTHER_SECTION_SIZE		0x4000
+#define USM_VISIBLE_SECTION_OFS		0x10000
+#define USM_VISIBLE_SECTION_SIZE	0x10000
+
+/* Register Map for Shared Section */
+#if defined(CONFIG_CPU_LITTLE_ENDIAN) || defined(GICISWORDLITTLEENDIAN)
+
+#define	GIC_SH_CONFIG_OFS		0x0000
+
+/* Shared Global Counter */
+#define GIC_SH_COUNTER_31_00_OFS	0x0010
+#define GIC_SH_COUNTER_63_32_OFS	0x0014
+
+/* Interrupt Polarity */
+#define GIC_SH_POL_31_0_OFS		0x0100
+#define GIC_SH_POL_63_32_OFS		0x0104
+#define GIC_SH_POL_95_64_OFS		0x0108
+#define GIC_SH_POL_127_96_OFS		0x010c
+#define GIC_SH_POL_159_128_OFS		0x0110
+#define GIC_SH_POL_191_160_OFS		0x0114
+#define GIC_SH_POL_223_192_OFS		0x0118
+#define GIC_SH_POL_255_224_OFS		0x011c
+
+/* Edge/Level Triggering */
+#define GIC_SH_TRIG_31_0_OFS		0x0180
+#define GIC_SH_TRIG_63_32_OFS		0x0184
+#define GIC_SH_TRIG_95_64_OFS		0x0188
+#define GIC_SH_TRIG_127_96_OFS		0x018c
+#define GIC_SH_TRIG_159_128_OFS		0x0190
+#define GIC_SH_TRIG_191_160_OFS		0x0194
+#define GIC_SH_TRIG_223_192_OFS		0x0198
+#define GIC_SH_TRIG_255_224_OFS		0x019c
+
+/* Dual Edge Triggering */
+#define GIC_SH_DUAL_31_0_OFS		0x0200
+#define GIC_SH_DUAL_63_32_OFS		0x0204
+#define GIC_SH_DUAL_95_64_OFS		0x0208
+#define GIC_SH_DUAL_127_96_OFS		0x020c
+#define GIC_SH_DUAL_159_128_OFS		0x0210
+#define GIC_SH_DUAL_191_160_OFS		0x0214
+#define GIC_SH_DUAL_223_192_OFS		0x0218
+#define GIC_SH_DUAL_255_224_OFS		0x021c
+
+/* Set/Clear corresponding bit in Edge Detect Register */
+#define GIC_SH_WEDGE_OFS		0x0280
+
+/* Reset Mask - Disables Interrupt */
+#define GIC_SH_RMASK_31_0_OFS		0x0300
+#define GIC_SH_RMASK_63_32_OFS		0x0304
+#define GIC_SH_RMASK_95_64_OFS		0x0308
+#define GIC_SH_RMASK_127_96_OFS		0x030c
+#define GIC_SH_RMASK_159_128_OFS	0x0310
+#define GIC_SH_RMASK_191_160_OFS	0x0314
+#define GIC_SH_RMASK_223_192_OFS	0x0318
+#define GIC_SH_RMASK_255_224_OFS	0x031c
+
+/* Set Mask (WO) - Enables Interrupt */
+#define GIC_SH_SMASK_31_0_OFS		0x0380
+#define GIC_SH_SMASK_63_32_OFS		0x0384
+#define GIC_SH_SMASK_95_64_OFS		0x0388
+#define GIC_SH_SMASK_127_96_OFS		0x038c
+#define GIC_SH_SMASK_159_128_OFS	0x0390
+#define GIC_SH_SMASK_191_160_OFS	0x0394
+#define GIC_SH_SMASK_223_192_OFS	0x0398
+#define GIC_SH_SMASK_255_224_OFS	0x039c
+
+/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */
+#define GIC_SH_MASK_31_0_OFS		0x0400
+#define GIC_SH_MASK_63_32_OFS		0x0404
+#define GIC_SH_MASK_95_64_OFS		0x0408
+#define GIC_SH_MASK_127_96_OFS		0x040c
+#define GIC_SH_MASK_159_128_OFS		0x0410
+#define GIC_SH_MASK_191_160_OFS		0x0414
+#define GIC_SH_MASK_223_192_OFS		0x0418
+#define GIC_SH_MASK_255_224_OFS		0x041c
+
+/* Pending Global Interrupts (RO) */
+#define GIC_SH_PEND_31_0_OFS		0x0480
+#define GIC_SH_PEND_63_32_OFS		0x0484
+#define GIC_SH_PEND_95_64_OFS		0x0488
+#define GIC_SH_PEND_127_96_OFS		0x048c
+#define GIC_SH_PEND_159_128_OFS		0x0490
+#define GIC_SH_PEND_191_160_OFS		0x0494
+#define GIC_SH_PEND_223_192_OFS		0x0498
+#define GIC_SH_PEND_255_224_OFS		0x049c
+
+#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS	0x0500
+
+/* Maps Interrupt X to a Pin */
+#define GIC_SH_MAP_TO_PIN(intr) \
+	(GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr))
+
+#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS	0x2000
+
+/* Maps Interrupt X to a VPE */
+#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
+	(GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + (((vpe) / 32) * 4))
+#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe)	(1 << ((vpe) % 32))
+
+/* Polarity : Reset Value is always 0 */
+#define GIC_SH_SET_POLARITY_OFS		0x0100
+#define GIC_SET_POLARITY(intr, pol) \
+	GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + (((intr) / 32) * 4)), (pol) << ((intr) % 32))
+
+/* Triggering : Reset Value is always 0 */
+#define GIC_SH_SET_TRIGGER_OFS		0x0180
+#define GIC_SET_TRIGGER(intr, trig) \
+	GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + (((intr) / 32) * 4)), (trig) << ((intr) % 32))
+
+/* Mask manipulation */
+#define GIC_SH_SMASK_OFS		0x0380
+#define GIC_SET_INTR_MASK(intr, val) \
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32)))
+
+#define GIC_SH_RMASK_OFS		0x0300
+#define GIC_CLR_INTR_MASK(intr, val) \
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32)))
+
+/* Register Map for Local Section */
+#define GIC_VPE_CTL_OFS			0x0000
+#define GIC_VPE_PEND_OFS		0x0004
+#define GIC_VPE_MASK_OFS		0x0008
+#define GIC_VPE_RMASK_OFS		0x000c
+#define GIC_VPE_SMASK_OFS		0x0010
+#define GIC_VPE_WD_MAP_OFS		0x0040
+#define GIC_VPE_COMPARE_MAP_OFS		0x0044
+#define GIC_VPE_TIMER_MAP_OFS		0x0048
+#define GIC_VPE_PERFCTR_MAP_OFS		0x0050
+#define GIC_VPE_SWINT0_MAP_OFS		0x0054
+#define GIC_VPE_SWINT1_MAP_OFS		0x0058
+#define GIC_VPE_OTHER_ADDR_OFS		0x0080
+#define GIC_VPE_WD_CONFIG0_OFS		0x0090
+#define GIC_VPE_WD_COUNT0_OFS		0x0094
+#define GIC_VPE_WD_INITIAL0_OFS		0x0098
+#define GIC_VPE_COMPARE_LO_OFS		0x00a0
+#define GIC_VPE_COMPARE_HI		0x00a4
+
+#define GIC_VPE_EIC_SHADOW_SET_BASE	0x0100
+#define GIC_VPE_EIC_SS(intr) \
+	(GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+
+#define GIC_VPE_EIC_VEC_BASE		0x0800
+#define GIC_VPE_EIC_VEC(intr) \
+	(GIC_VPE_EIC_VEC_BASE + (4 * intr))
+
+#define GIC_VPE_TENABLE_NMI_OFS		0x1000
+#define GIC_VPE_TENABLE_YQ_OFS		0x1004
+#define GIC_VPE_TENABLE_INT_31_0_OFS	0x1080
+#define GIC_VPE_TENABLE_INT_63_32_OFS	0x1084
+
+/* User Mode Visible Section Register Map */
+#define GIC_UMV_SH_COUNTER_31_00_OFS	0x0000
+#define GIC_UMV_SH_COUNTER_63_32_OFS	0x0004
+
+#else /* CONFIG_CPU_BIG_ENDIAN */
+
+#define	GIC_SH_CONFIG_OFS		0x0000
+
+/* Shared Global Counter */
+#define GIC_SH_COUNTER_31_00_OFS	0x0014
+#define GIC_SH_COUNTER_63_32_OFS	0x0010
+
+/* Interrupt Polarity */
+#define GIC_SH_POL_31_0_OFS		0x0104
+#define GIC_SH_POL_63_32_OFS		0x0100
+#define GIC_SH_POL_95_64_OFS		0x010c
+#define GIC_SH_POL_127_96_OFS		0x0108
+#define GIC_SH_POL_159_128_OFS		0x0114
+#define GIC_SH_POL_191_160_OFS		0x0110
+#define GIC_SH_POL_223_192_OFS		0x011c
+#define GIC_SH_POL_255_224_OFS		0x0118
+
+/* Edge/Level Triggering */
+#define GIC_SH_TRIG_31_0_OFS		0x0184
+#define GIC_SH_TRIG_63_32_OFS		0x0180
+#define GIC_SH_TRIG_95_64_OFS		0x018c
+#define GIC_SH_TRIG_127_96_OFS		0x0188
+#define GIC_SH_TRIG_159_128_OFS		0x0194
+#define GIC_SH_TRIG_191_160_OFS		0x0190
+#define GIC_SH_TRIG_223_192_OFS		0x019c
+#define GIC_SH_TRIG_255_224_OFS		0x0198
+
+/* Dual Edge Triggering */
+#define GIC_SH_DUAL_31_0_OFS		0x0204
+#define GIC_SH_DUAL_63_32_OFS		0x0200
+#define GIC_SH_DUAL_95_64_OFS		0x020c
+#define GIC_SH_DUAL_127_96_OFS		0x0208
+#define GIC_SH_DUAL_159_128_OFS		0x0214
+#define GIC_SH_DUAL_191_160_OFS		0x0210
+#define GIC_SH_DUAL_223_192_OFS		0x021c
+#define GIC_SH_DUAL_255_224_OFS		0x0218
+
+/* Set/Clear corresponding bit in Edge Detect Register */
+#define GIC_SH_WEDGE_OFS		0x0280
+
+/* Reset Mask - Disables Interrupt */
+#define GIC_SH_RMASK_31_0_OFS		0x0304
+#define GIC_SH_RMASK_63_32_OFS		0x0300
+#define GIC_SH_RMASK_95_64_OFS		0x030c
+#define GIC_SH_RMASK_127_96_OFS		0x0308
+#define GIC_SH_RMASK_159_128_OFS	0x0314
+#define GIC_SH_RMASK_191_160_OFS	0x0310
+#define GIC_SH_RMASK_223_192_OFS	0x031c
+#define GIC_SH_RMASK_255_224_OFS	0x0318
+
+/* Set Mask (WO) - Enables Interrupt */
+#define GIC_SH_SMASK_31_0_OFS		0x0384
+#define GIC_SH_SMASK_63_32_OFS		0x0380
+#define GIC_SH_SMASK_95_64_OFS		0x038c
+#define GIC_SH_SMASK_127_96_OFS		0x0388
+#define GIC_SH_SMASK_159_128_OFS	0x0394
+#define GIC_SH_SMASK_191_160_OFS	0x0390
+#define GIC_SH_SMASK_223_192_OFS	0x039c
+#define GIC_SH_SMASK_255_224_OFS	0x0398
+
+/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */
+#define GIC_SH_MASK_31_0_OFS		0x0404
+#define GIC_SH_MASK_63_32_OFS		0x0400
+#define GIC_SH_MASK_95_64_OFS		0x040c
+#define GIC_SH_MASK_127_96_OFS		0x0408
+#define GIC_SH_MASK_159_128_OFS		0x0414
+#define GIC_SH_MASK_191_160_OFS		0x0410
+#define GIC_SH_MASK_223_192_OFS		0x041c
+#define GIC_SH_MASK_255_224_OFS		0x0418
+
+/* Pending Global Interrupts (RO) */
+#define GIC_SH_PEND_31_0_OFS		0x0484
+#define GIC_SH_PEND_63_32_OFS		0x0480
+#define GIC_SH_PEND_95_64_OFS		0x048c
+#define GIC_SH_PEND_127_96_OFS		0x0488
+#define GIC_SH_PEND_159_128_OFS		0x0494
+#define GIC_SH_PEND_191_160_OFS		0x0490
+#define GIC_SH_PEND_223_192_OFS		0x049c
+#define GIC_SH_PEND_255_224_OFS		0x0498
+
+#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS	0x0500
+
+/* Maps Interrupt X to a Pin */
+#define GIC_SH_MAP_TO_PIN(intr) \
+	(GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr))
+
+#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS	0x2004
+
+/*
+ * Maps Interrupt X to a VPE.  This is more complex than the LE case, as
+ * odd and even registers need to be transposed.  It does work - trust me!
+ */
+#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
+	(GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + \
+	(((((vpe) / 32) ^ 1) - 1) * 4))
+#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe)	(1 << ((vpe) % 32))
+
+/* Polarity */
+#define GIC_SH_SET_POLARITY_OFS		0x0100
+#define GIC_SET_POLARITY(intr, pol) \
+	GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (pol) << ((intr) % 32))
+
+/* Triggering */
+#define GIC_SH_SET_TRIGGER_OFS		0x0180
+#define GIC_SET_TRIGGER(intr, trig) \
+	GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (trig) << ((intr) % 32))
+
+/* Mask manipulation */
+#define GIC_SH_SMASK_OFS		0x0380
+#define GIC_SET_INTR_MASK(intr, val) \
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
+
+#define GIC_SH_RMASK_OFS		0x0300
+#define GIC_CLR_INTR_MASK(intr, val) \
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
+
+/* Register Map for Local Section */
+#define GIC_VPE_CTL_OFS			0x0000
+#define GIC_VPE_PEND_OFS		0x0004
+#define GIC_VPE_MASK_OFS		0x0008
+#define GIC_VPE_RMASK_OFS		0x000c
+#define GIC_VPE_SMASK_OFS		0x0010
+#define GIC_VPE_WD_MAP_OFS		0x0040
+#define GIC_VPE_COMPARE_MAP_OFS		0x0044
+#define GIC_VPE_TIMER_MAP_OFS		0x0048
+#define GIC_VPE_PERFCTR_MAP_OFS		0x0050
+#define GIC_VPE_SWINT0_MAP_OFS		0x0054
+#define GIC_VPE_SWINT1_MAP_OFS		0x0058
+#define GIC_VPE_OTHER_ADDR_OFS		0x0080
+#define GIC_VPE_WD_CONFIG0_OFS		0x0090
+#define GIC_VPE_WD_COUNT0_OFS		0x0094
+#define GIC_VPE_WD_INITIAL0_OFS		0x0098
+#define GIC_VPE_COMPARE_LO_OFS		0x00a4
+#define GIC_VPE_COMPARE_HI_OFS		0x00a0
+
+#define GIC_VPE_EIC_SHADOW_SET_BASE	0x0100
+#define GIC_VPE_EIC_SS(intr) \
+	(GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+
+#define GIC_VPE_EIC_VEC_BASE		0x0800
+#define GIC_VPE_EIC_VEC(intr) \
+	(GIC_VPE_EIC_VEC_BASE + (4 * intr))
+
+#define GIC_VPE_TENABLE_NMI_OFS		0x1000
+#define GIC_VPE_TENABLE_YQ_OFS		0x1004
+#define GIC_VPE_TENABLE_INT_31_0_OFS	0x1080
+#define GIC_VPE_TENABLE_INT_63_32_OFS	0x1084
+
+/* User Mode Visible Section Register Map */
+#define GIC_UMV_SH_COUNTER_31_00_OFS	0x0004
+#define GIC_UMV_SH_COUNTER_63_32_OFS	0x0000
+
+#endif /* !LE */
+
+/* Masks */
+#define GIC_SH_CONFIG_COUNTSTOP_SHF	28
+#define GIC_SH_CONFIG_COUNTSTOP_MSK	(MSK(1) << GIC_SH_CONFIG_COUNTSTOP_SHF)
+
+#define GIC_SH_CONFIG_COUNTBITS_SHF	24
+#define GIC_SH_CONFIG_COUNTBITS_MSK	(MSK(4) << GIC_SH_CONFIG_COUNTBITS_SHF)
+
+#define GIC_SH_CONFIG_NUMINTRS_SHF	16
+#define GIC_SH_CONFIG_NUMINTRS_MSK	(MSK(8) << GIC_SH_CONFIG_NUMINTRS_SHF)
+
+#define GIC_SH_CONFIG_NUMVPES_SHF	0
+#define GIC_SH_CONFIG_NUMVPES_MSK	(MSK(8) << GIC_SH_CONFIG_NUMVPES_SHF)
+
+#define GIC_SH_WEDGE_SET(intr)		(intr | (0x1 << 31))
+#define GIC_SH_WEDGE_CLR(intr)		(intr & ~(0x1 << 31))
+
+#define GIC_MAP_TO_PIN_SHF		31
+#define GIC_MAP_TO_PIN_MSK		(MSK(1) << GIC_MAP_TO_PIN_SHF)
+#define GIC_MAP_TO_NMI_SHF		30
+#define GIC_MAP_TO_NMI_MSK		(MSK(1) << GIC_MAP_TO_NMI_SHF)
+#define GIC_MAP_TO_YQ_SHF		29
+#define GIC_MAP_TO_YQ_MSK		(MSK(1) << GIC_MAP_TO_YQ_SHF)
+#define GIC_MAP_SHF			0
+#define GIC_MAP_MSK			(MSK(6) << GIC_MAP_SHF)
+
+/* GIC_VPE_CTL Masks */
+#define GIC_VPE_CTL_PERFCNT_RTBL_SHF	2
+#define GIC_VPE_CTL_PERFCNT_RTBL_MSK	(MSK(1) << GIC_VPE_CTL_PERFCNT_RTBL_SHF)
+#define GIC_VPE_CTL_TIMER_RTBL_SHF	1
+#define GIC_VPE_CTL_TIMER_RTBL_MSK	(MSK(1) << GIC_VPE_CTL_TIMER_RTBL_SHF)
+#define GIC_VPE_CTL_EIC_MODE_SHF	0
+#define GIC_VPE_CTL_EIC_MODE_MSK	(MSK(1) << GIC_VPE_CTL_EIC_MODE_SHF)
+
+/* GIC_VPE_PEND Masks */
+#define GIC_VPE_PEND_WD_SHF		0
+#define GIC_VPE_PEND_WD_MSK		(MSK(1) << GIC_VPE_PEND_WD_SHF)
+#define GIC_VPE_PEND_CMP_SHF		1
+#define GIC_VPE_PEND_CMP_MSK		(MSK(1) << GIC_VPE_PEND_CMP_SHF)
+#define GIC_VPE_PEND_TIMER_SHF		2
+#define GIC_VPE_PEND_TIMER_MSK		(MSK(1) << GIC_VPE_PEND_TIMER_SHF)
+#define GIC_VPE_PEND_PERFCOUNT_SHF	3
+#define GIC_VPE_PEND_PERFCOUNT_MSK	(MSK(1) << GIC_VPE_PEND_PERFCOUNT_SHF)
+#define GIC_VPE_PEND_SWINT0_SHF		4
+#define GIC_VPE_PEND_SWINT0_MSK		(MSK(1) << GIC_VPE_PEND_SWINT0_SHF)
+#define GIC_VPE_PEND_SWINT1_SHF		5
+#define GIC_VPE_PEND_SWINT1_MSK		(MSK(1) << GIC_VPE_PEND_SWINT1_SHF)
+
+/* GIC_VPE_RMASK Masks */
+#define GIC_VPE_RMASK_WD_SHF		0
+#define GIC_VPE_RMASK_WD_MSK		(MSK(1) << GIC_VPE_RMASK_WD_SHF)
+#define GIC_VPE_RMASK_CMP_SHF		1
+#define GIC_VPE_RMASK_CMP_MSK		(MSK(1) << GIC_VPE_RMASK_CMP_SHF)
+#define GIC_VPE_RMASK_TIMER_SHF		2
+#define GIC_VPE_RMASK_TIMER_MSK		(MSK(1) << GIC_VPE_RMASK_TIMER_SHF)
+#define GIC_VPE_RMASK_PERFCNT_SHF	3
+#define GIC_VPE_RMASK_PERFCNT_MSK	(MSK(1) << GIC_VPE_RMASK_PERFCNT_SHF)
+#define GIC_VPE_RMASK_SWINT0_SHF	4
+#define GIC_VPE_RMASK_SWINT0_MSK	(MSK(1) << GIC_VPE_RMASK_SWINT0_SHF)
+#define GIC_VPE_RMASK_SWINT1_SHF	5
+#define GIC_VPE_RMASK_SWINT1_MSK	(MSK(1) << GIC_VPE_RMASK_SWINT1_SHF)
+
+/* GIC_VPE_SMASK Masks */
+#define GIC_VPE_SMASK_WD_SHF		0
+#define GIC_VPE_SMASK_WD_MSK		(MSK(1) << GIC_VPE_SMASK_WD_SHF)
+#define GIC_VPE_SMASK_CMP_SHF		1
+#define GIC_VPE_SMASK_CMP_MSK		(MSK(1) << GIC_VPE_SMASK_CMP_SHF)
+#define GIC_VPE_SMASK_TIMER_SHF		2
+#define GIC_VPE_SMASK_TIMER_MSK		(MSK(1) << GIC_VPE_SMASK_TIMER_SHF)
+#define GIC_VPE_SMASK_PERFCNT_SHF	3
+#define GIC_VPE_SMASK_PERFCNT_MSK	(MSK(1) << GIC_VPE_SMASK_PERFCNT_SHF)
+#define GIC_VPE_SMASK_SWINT0_SHF	4
+#define GIC_VPE_SMASK_SWINT0_MSK	(MSK(1) << GIC_VPE_SMASK_SWINT0_SHF)
+#define GIC_VPE_SMASK_SWINT1_SHF	5
+#define GIC_VPE_SMASK_SWINT1_MSK	(MSK(1) << GIC_VPE_SMASK_SWINT1_SHF)
+
+/*
+ * Set the Mapping of Interrupt X to a VPE.
+ */
+#define GIC_SH_MAP_TO_VPE_SMASK(intr, vpe) \
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe)), \
+		 GIC_SH_MAP_TO_VPE_REG_BIT(vpe))
+
+struct gic_pcpu_mask {
+       DECLARE_BITMAP(pcpu_mask, GIC_NUM_INTRS);
+};
+
+struct gic_pending_regs {
+       DECLARE_BITMAP(pending, GIC_NUM_INTRS);
+};
+
+struct gic_intrmask_regs {
+       DECLARE_BITMAP(intrmask, GIC_NUM_INTRS);
+};
+
+/*
+ * Interrupt Meta-data specification. The ipiflag helps
+ * in building ipi_map.
+ */
+struct gic_intr_map {
+	unsigned int intrnum; 	/* Ext Intr Num 	*/
+	unsigned int cpunum;	/* Directed to this CPU */
+	unsigned int pin;	/* Directed to this Pin */
+	unsigned int polarity;	/* Polarity : +/-	*/
+	unsigned int trigtype;	/* Trigger  : Edge/Levl */
+	unsigned int ipiflag;	/* Is used for IPI ?	*/
+};
+
+extern void gic_init(unsigned long gic_base_addr,
+	unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
+	unsigned int intrmap_size, unsigned int irqbase);
+
+extern unsigned int gic_get_int(void);
+extern void gic_send_ipi(unsigned int intr);
+
+#endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/include/asm/gpio.h b/arch/mips/include/asm/gpio.h
new file mode 100644
index 0000000..06e46fa
--- /dev/null
+++ b/arch/mips/include/asm/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MIPS_GPIO_H
+#define __ASM_MIPS_GPIO_H
+
+#include <gpio.h>
+
+#endif /* __ASM_MIPS_GPIO_H */
diff --git a/arch/mips/include/asm/gt64120.h b/arch/mips/include/asm/gt64120.h
new file mode 100644
index 0000000..e64b410
--- /dev/null
+++ b/arch/mips/include/asm/gt64120.h
@@ -0,0 +1,580 @@
+/*
+ * Copyright (C) 2000, 2004, 2005  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#ifndef _ASM_GT64120_H
+#define _ASM_GT64120_H
+
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#define MSK(n)			((1 << (n)) - 1)
+
+/*
+ *  Register offset addresses
+ */
+/* CPU Configuration.  */
+#define GT_CPU_OFS		0x000
+
+#define GT_MULTI_OFS		0x120
+
+/* CPU Address Decode.  */
+#define GT_SCS10LD_OFS		0x008
+#define GT_SCS10HD_OFS		0x010
+#define GT_SCS32LD_OFS		0x018
+#define GT_SCS32HD_OFS		0x020
+#define GT_CS20LD_OFS		0x028
+#define GT_CS20HD_OFS		0x030
+#define GT_CS3BOOTLD_OFS	0x038
+#define GT_CS3BOOTHD_OFS	0x040
+#define GT_PCI0IOLD_OFS		0x048
+#define GT_PCI0IOHD_OFS		0x050
+#define GT_PCI0M0LD_OFS		0x058
+#define GT_PCI0M0HD_OFS		0x060
+#define GT_ISD_OFS		0x068
+
+#define GT_PCI0M1LD_OFS		0x080
+#define GT_PCI0M1HD_OFS		0x088
+#define GT_PCI1IOLD_OFS		0x090
+#define GT_PCI1IOHD_OFS		0x098
+#define GT_PCI1M0LD_OFS		0x0a0
+#define GT_PCI1M0HD_OFS		0x0a8
+#define GT_PCI1M1LD_OFS		0x0b0
+#define GT_PCI1M1HD_OFS		0x0b8
+#define GT_PCI1M1LD_OFS		0x0b0
+#define GT_PCI1M1HD_OFS		0x0b8
+
+#define GT_SCS10AR_OFS		0x0d0
+#define GT_SCS32AR_OFS		0x0d8
+#define GT_CS20R_OFS		0x0e0
+#define GT_CS3BOOTR_OFS		0x0e8
+
+#define GT_PCI0IOREMAP_OFS	0x0f0
+#define GT_PCI0M0REMAP_OFS	0x0f8
+#define GT_PCI0M1REMAP_OFS	0x100
+#define GT_PCI1IOREMAP_OFS	0x108
+#define GT_PCI1M0REMAP_OFS	0x110
+#define GT_PCI1M1REMAP_OFS	0x118
+
+/* CPU Error Report.  */
+#define GT_CPUERR_ADDRLO_OFS	0x070
+#define GT_CPUERR_ADDRHI_OFS	0x078
+
+#define GT_CPUERR_DATALO_OFS	0x128			/* GT-64120A only  */
+#define GT_CPUERR_DATAHI_OFS	0x130			/* GT-64120A only  */
+#define GT_CPUERR_PARITY_OFS	0x138			/* GT-64120A only  */
+
+/* CPU Sync Barrier.  */
+#define GT_PCI0SYNC_OFS		0x0c0
+#define GT_PCI1SYNC_OFS		0x0c8
+
+/* SDRAM and Device Address Decode.  */
+#define GT_SCS0LD_OFS		0x400
+#define GT_SCS0HD_OFS		0x404
+#define GT_SCS1LD_OFS		0x408
+#define GT_SCS1HD_OFS		0x40c
+#define GT_SCS2LD_OFS		0x410
+#define GT_SCS2HD_OFS		0x414
+#define GT_SCS3LD_OFS		0x418
+#define GT_SCS3HD_OFS		0x41c
+#define GT_CS0LD_OFS		0x420
+#define GT_CS0HD_OFS		0x424
+#define GT_CS1LD_OFS		0x428
+#define GT_CS1HD_OFS		0x42c
+#define GT_CS2LD_OFS		0x430
+#define GT_CS2HD_OFS		0x434
+#define GT_CS3LD_OFS		0x438
+#define GT_CS3HD_OFS		0x43c
+#define GT_BOOTLD_OFS		0x440
+#define GT_BOOTHD_OFS		0x444
+
+#define GT_ADERR_OFS		0x470
+
+/* SDRAM Configuration.  */
+#define GT_SDRAM_CFG_OFS	0x448
+
+#define GT_SDRAM_OPMODE_OFS	0x474
+#define GT_SDRAM_BM_OFS		0x478
+#define GT_SDRAM_ADDRDECODE_OFS	0x47c
+
+/* SDRAM Parameters.  */
+#define GT_SDRAM_B0_OFS		0x44c
+#define GT_SDRAM_B1_OFS		0x450
+#define GT_SDRAM_B2_OFS		0x454
+#define GT_SDRAM_B3_OFS		0x458
+
+/* Device Parameters.  */
+#define GT_DEV_B0_OFS		0x45c
+#define GT_DEV_B1_OFS		0x460
+#define GT_DEV_B2_OFS		0x464
+#define GT_DEV_B3_OFS		0x468
+#define GT_DEV_BOOT_OFS		0x46c
+
+/* ECC.  */
+#define GT_ECC_ERRDATALO	0x480			/* GT-64120A only  */
+#define GT_ECC_ERRDATAHI	0x484			/* GT-64120A only  */
+#define GT_ECC_MEM		0x488			/* GT-64120A only  */
+#define GT_ECC_CALC		0x48c			/* GT-64120A only  */
+#define GT_ECC_ERRADDR		0x490			/* GT-64120A only  */
+
+/* DMA Record.  */
+#define GT_DMA0_CNT_OFS		0x800
+#define GT_DMA1_CNT_OFS		0x804
+#define GT_DMA2_CNT_OFS		0x808
+#define GT_DMA3_CNT_OFS		0x80c
+#define GT_DMA0_SA_OFS		0x810
+#define GT_DMA1_SA_OFS		0x814
+#define GT_DMA2_SA_OFS		0x818
+#define GT_DMA3_SA_OFS		0x81c
+#define GT_DMA0_DA_OFS		0x820
+#define GT_DMA1_DA_OFS		0x824
+#define GT_DMA2_DA_OFS		0x828
+#define GT_DMA3_DA_OFS		0x82c
+#define GT_DMA0_NEXT_OFS	0x830
+#define GT_DMA1_NEXT_OFS	0x834
+#define GT_DMA2_NEXT_OFS	0x838
+#define GT_DMA3_NEXT_OFS	0x83c
+
+#define GT_DMA0_CUR_OFS		0x870
+#define GT_DMA1_CUR_OFS		0x874
+#define GT_DMA2_CUR_OFS		0x878
+#define GT_DMA3_CUR_OFS		0x87c
+
+/* DMA Channel Control.  */
+#define GT_DMA0_CTRL_OFS	0x840
+#define GT_DMA1_CTRL_OFS	0x844
+#define GT_DMA2_CTRL_OFS	0x848
+#define GT_DMA3_CTRL_OFS	0x84c
+
+/* DMA Arbiter.  */
+#define GT_DMA_ARB_OFS		0x860
+
+/* Timer/Counter.  */
+#define GT_TC0_OFS		0x850
+#define GT_TC1_OFS		0x854
+#define GT_TC2_OFS		0x858
+#define GT_TC3_OFS		0x85c
+
+#define GT_TC_CONTROL_OFS	0x864
+
+/* PCI Internal.  */
+#define GT_PCI0_CMD_OFS		0xc00
+#define GT_PCI0_TOR_OFS		0xc04
+#define GT_PCI0_BS_SCS10_OFS	0xc08
+#define GT_PCI0_BS_SCS32_OFS	0xc0c
+#define GT_PCI0_BS_CS20_OFS	0xc10
+#define GT_PCI0_BS_CS3BT_OFS	0xc14
+
+#define GT_PCI1_IACK_OFS	0xc30
+#define GT_PCI0_IACK_OFS	0xc34
+
+#define GT_PCI0_BARE_OFS	0xc3c
+#define GT_PCI0_PREFMBR_OFS	0xc40
+
+#define GT_PCI0_SCS10_BAR_OFS	0xc48
+#define GT_PCI0_SCS32_BAR_OFS	0xc4c
+#define GT_PCI0_CS20_BAR_OFS	0xc50
+#define GT_PCI0_CS3BT_BAR_OFS	0xc54
+#define GT_PCI0_SSCS10_BAR_OFS	0xc58
+#define GT_PCI0_SSCS32_BAR_OFS	0xc5c
+
+#define GT_PCI0_SCS3BT_BAR_OFS	0xc64
+
+#define GT_PCI1_CMD_OFS		0xc80
+#define GT_PCI1_TOR_OFS		0xc84
+#define GT_PCI1_BS_SCS10_OFS	0xc88
+#define GT_PCI1_BS_SCS32_OFS	0xc8c
+#define GT_PCI1_BS_CS20_OFS	0xc90
+#define GT_PCI1_BS_CS3BT_OFS	0xc94
+
+#define GT_PCI1_BARE_OFS	0xcbc
+#define GT_PCI1_PREFMBR_OFS	0xcc0
+
+#define GT_PCI1_SCS10_BAR_OFS	0xcc8
+#define GT_PCI1_SCS32_BAR_OFS	0xccc
+#define GT_PCI1_CS20_BAR_OFS	0xcd0
+#define GT_PCI1_CS3BT_BAR_OFS	0xcd4
+#define GT_PCI1_SSCS10_BAR_OFS	0xcd8
+#define GT_PCI1_SSCS32_BAR_OFS	0xcdc
+
+#define GT_PCI1_SCS3BT_BAR_OFS	0xce4
+
+#define GT_PCI1_CFGADDR_OFS	0xcf0
+#define GT_PCI1_CFGDATA_OFS	0xcf4
+#define GT_PCI0_CFGADDR_OFS	0xcf8
+#define GT_PCI0_CFGDATA_OFS	0xcfc
+
+/* Interrupts.  */
+#define GT_INTRCAUSE_OFS	0xc18
+#define GT_INTRMASK_OFS		0xc1c
+
+#define GT_PCI0_ICMASK_OFS	0xc24
+#define GT_PCI0_SERR0MASK_OFS	0xc28
+
+#define GT_CPU_INTSEL_OFS	0xc70
+#define GT_PCI0_INTSEL_OFS	0xc74
+
+#define GT_HINTRCAUSE_OFS	0xc98
+#define GT_HINTRMASK_OFS	0xc9c
+
+#define GT_PCI0_HICMASK_OFS	0xca4
+#define GT_PCI1_SERR1MASK_OFS	0xca8
+
+
+/*
+ * I2O Support Registers
+ */
+#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE		0x010
+#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE		0x014
+#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE		0x018
+#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE		0x01c
+#define INBOUND_DOORBELL_REGISTER_PCI_SIDE		0x020
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE	0x024
+#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE	0x028
+#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE		0x02c
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE	0x030
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE	0x034
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE	0x040
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE	0x044
+#define QUEUE_CONTROL_REGISTER_PCI_SIDE			0x050
+#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE		0x054
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE	0x060
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE	0x064
+#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE	0x068
+#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE	0x06c
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE	0x070
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE	0x074
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE	0x078
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE	0x07c
+
+#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE		0x1c10
+#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE		0x1c14
+#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE		0x1c18
+#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE		0x1c1c
+#define INBOUND_DOORBELL_REGISTER_CPU_SIDE		0x1c20
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE	0x1c24
+#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE	0x1c28
+#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE		0x1c2c
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE	0x1c30
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE	0x1c34
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE	0x1c40
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE	0x1c44
+#define QUEUE_CONTROL_REGISTER_CPU_SIDE			0x1c50
+#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE		0x1c54
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c60
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c64
+#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c68
+#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c6c
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c70
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c74
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c78
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c7c
+
+/*
+ *  Register encodings
+ */
+#define GT_CPU_ENDIAN_SHF	12
+#define GT_CPU_ENDIAN_MSK	(MSK(1) << GT_CPU_ENDIAN_SHF)
+#define GT_CPU_ENDIAN_BIT	GT_CPU_ENDIAN_MSK
+#define GT_CPU_WR_SHF		16
+#define GT_CPU_WR_MSK		(MSK(1) << GT_CPU_WR_SHF)
+#define GT_CPU_WR_BIT		GT_CPU_WR_MSK
+#define GT_CPU_WR_DXDXDXDX	0
+#define GT_CPU_WR_DDDD		1
+
+
+#define GT_PCI_DCRM_SHF		21
+#define GT_PCI_LD_SHF		0
+#define GT_PCI_LD_MSK		(MSK(15) << GT_PCI_LD_SHF)
+#define GT_PCI_HD_SHF		0
+#define GT_PCI_HD_MSK		(MSK(7) << GT_PCI_HD_SHF)
+#define GT_PCI_REMAP_SHF	0
+#define GT_PCI_REMAP_MSK	(MSK(11) << GT_PCI_REMAP_SHF)
+
+
+#define GT_CFGADDR_CFGEN_SHF	31
+#define GT_CFGADDR_CFGEN_MSK	(MSK(1) << GT_CFGADDR_CFGEN_SHF)
+#define GT_CFGADDR_CFGEN_BIT	GT_CFGADDR_CFGEN_MSK
+
+#define GT_CFGADDR_BUSNUM_SHF	16
+#define GT_CFGADDR_BUSNUM_MSK	(MSK(8) << GT_CFGADDR_BUSNUM_SHF)
+
+#define GT_CFGADDR_DEVNUM_SHF	11
+#define GT_CFGADDR_DEVNUM_MSK	(MSK(5) << GT_CFGADDR_DEVNUM_SHF)
+
+#define GT_CFGADDR_FUNCNUM_SHF	8
+#define GT_CFGADDR_FUNCNUM_MSK	(MSK(3) << GT_CFGADDR_FUNCNUM_SHF)
+
+#define GT_CFGADDR_REGNUM_SHF	2
+#define GT_CFGADDR_REGNUM_MSK	(MSK(6) << GT_CFGADDR_REGNUM_SHF)
+
+
+#define GT_SDRAM_BM_ORDER_SHF	2
+#define GT_SDRAM_BM_ORDER_MSK	(MSK(1) << GT_SDRAM_BM_ORDER_SHF)
+#define GT_SDRAM_BM_ORDER_BIT	GT_SDRAM_BM_ORDER_MSK
+#define GT_SDRAM_BM_ORDER_SUB	1
+#define GT_SDRAM_BM_ORDER_LIN	0
+
+#define GT_SDRAM_BM_RSVD_ALL1	0xffb
+
+
+#define GT_SDRAM_ADDRDECODE_ADDR_SHF	0
+#define GT_SDRAM_ADDRDECODE_ADDR_MSK	(MSK(3) << GT_SDRAM_ADDRDECODE_ADDR_SHF)
+#define GT_SDRAM_ADDRDECODE_ADDR_0	0
+#define GT_SDRAM_ADDRDECODE_ADDR_1	1
+#define GT_SDRAM_ADDRDECODE_ADDR_2	2
+#define GT_SDRAM_ADDRDECODE_ADDR_3	3
+#define GT_SDRAM_ADDRDECODE_ADDR_4	4
+#define GT_SDRAM_ADDRDECODE_ADDR_5	5
+#define GT_SDRAM_ADDRDECODE_ADDR_6	6
+#define GT_SDRAM_ADDRDECODE_ADDR_7	7
+
+
+#define GT_SDRAM_B0_CASLAT_SHF		0
+#define GT_SDRAM_B0_CASLAT_MSK		(MSK(2) << GT_SDRAM_B0__SHF)
+#define GT_SDRAM_B0_CASLAT_2		1
+#define GT_SDRAM_B0_CASLAT_3		2
+
+#define GT_SDRAM_B0_FTDIS_SHF		2
+#define GT_SDRAM_B0_FTDIS_MSK		(MSK(1) << GT_SDRAM_B0_FTDIS_SHF)
+#define GT_SDRAM_B0_FTDIS_BIT		GT_SDRAM_B0_FTDIS_MSK
+
+#define GT_SDRAM_B0_SRASPRCHG_SHF	3
+#define GT_SDRAM_B0_SRASPRCHG_MSK	(MSK(1) << GT_SDRAM_B0_SRASPRCHG_SHF)
+#define GT_SDRAM_B0_SRASPRCHG_BIT	GT_SDRAM_B0_SRASPRCHG_MSK
+#define GT_SDRAM_B0_SRASPRCHG_2		0
+#define GT_SDRAM_B0_SRASPRCHG_3		1
+
+#define GT_SDRAM_B0_B0COMPAB_SHF	4
+#define GT_SDRAM_B0_B0COMPAB_MSK	(MSK(1) << GT_SDRAM_B0_B0COMPAB_SHF)
+#define GT_SDRAM_B0_B0COMPAB_BIT	GT_SDRAM_B0_B0COMPAB_MSK
+
+#define GT_SDRAM_B0_64BITINT_SHF	5
+#define GT_SDRAM_B0_64BITINT_MSK	(MSK(1) << GT_SDRAM_B0_64BITINT_SHF)
+#define GT_SDRAM_B0_64BITINT_BIT	GT_SDRAM_B0_64BITINT_MSK
+#define GT_SDRAM_B0_64BITINT_2		0
+#define GT_SDRAM_B0_64BITINT_4		1
+
+#define GT_SDRAM_B0_BW_SHF		6
+#define GT_SDRAM_B0_BW_MSK		(MSK(1) << GT_SDRAM_B0_BW_SHF)
+#define GT_SDRAM_B0_BW_BIT		GT_SDRAM_B0_BW_MSK
+#define GT_SDRAM_B0_BW_32		0
+#define GT_SDRAM_B0_BW_64		1
+
+#define GT_SDRAM_B0_BLODD_SHF		7
+#define GT_SDRAM_B0_BLODD_MSK		(MSK(1) << GT_SDRAM_B0_BLODD_SHF)
+#define GT_SDRAM_B0_BLODD_BIT		GT_SDRAM_B0_BLODD_MSK
+
+#define GT_SDRAM_B0_PAR_SHF		8
+#define GT_SDRAM_B0_PAR_MSK		(MSK(1) << GT_SDRAM_B0_PAR_SHF)
+#define GT_SDRAM_B0_PAR_BIT		GT_SDRAM_B0_PAR_MSK
+
+#define GT_SDRAM_B0_BYPASS_SHF		9
+#define GT_SDRAM_B0_BYPASS_MSK		(MSK(1) << GT_SDRAM_B0_BYPASS_SHF)
+#define GT_SDRAM_B0_BYPASS_BIT		GT_SDRAM_B0_BYPASS_MSK
+
+#define GT_SDRAM_B0_SRAS2SCAS_SHF	10
+#define GT_SDRAM_B0_SRAS2SCAS_MSK	(MSK(1) << GT_SDRAM_B0_SRAS2SCAS_SHF)
+#define GT_SDRAM_B0_SRAS2SCAS_BIT	GT_SDRAM_B0_SRAS2SCAS_MSK
+#define GT_SDRAM_B0_SRAS2SCAS_2		0
+#define GT_SDRAM_B0_SRAS2SCAS_3		1
+
+#define GT_SDRAM_B0_SIZE_SHF		11
+#define GT_SDRAM_B0_SIZE_MSK		(MSK(1) << GT_SDRAM_B0_SIZE_SHF)
+#define GT_SDRAM_B0_SIZE_BIT		GT_SDRAM_B0_SIZE_MSK
+#define GT_SDRAM_B0_SIZE_16M		0
+#define GT_SDRAM_B0_SIZE_64M		1
+
+#define GT_SDRAM_B0_EXTPAR_SHF		12
+#define GT_SDRAM_B0_EXTPAR_MSK		(MSK(1) << GT_SDRAM_B0_EXTPAR_SHF)
+#define GT_SDRAM_B0_EXTPAR_BIT		GT_SDRAM_B0_EXTPAR_MSK
+
+#define GT_SDRAM_B0_BLEN_SHF		13
+#define GT_SDRAM_B0_BLEN_MSK		(MSK(1) << GT_SDRAM_B0_BLEN_SHF)
+#define GT_SDRAM_B0_BLEN_BIT		GT_SDRAM_B0_BLEN_MSK
+#define GT_SDRAM_B0_BLEN_8		0
+#define GT_SDRAM_B0_BLEN_4		1
+
+
+#define GT_SDRAM_CFG_REFINT_SHF		0
+#define GT_SDRAM_CFG_REFINT_MSK		(MSK(14) << GT_SDRAM_CFG_REFINT_SHF)
+
+#define GT_SDRAM_CFG_NINTERLEAVE_SHF	14
+#define GT_SDRAM_CFG_NINTERLEAVE_MSK	(MSK(1) << GT_SDRAM_CFG_NINTERLEAVE_SHF)
+#define GT_SDRAM_CFG_NINTERLEAVE_BIT	GT_SDRAM_CFG_NINTERLEAVE_MSK
+
+#define GT_SDRAM_CFG_RMW_SHF		15
+#define GT_SDRAM_CFG_RMW_MSK		(MSK(1) << GT_SDRAM_CFG_RMW_SHF)
+#define GT_SDRAM_CFG_RMW_BIT		GT_SDRAM_CFG_RMW_MSK
+
+#define GT_SDRAM_CFG_NONSTAGREF_SHF	16
+#define GT_SDRAM_CFG_NONSTAGREF_MSK	(MSK(1) << GT_SDRAM_CFG_NONSTAGREF_SHF)
+#define GT_SDRAM_CFG_NONSTAGREF_BIT	GT_SDRAM_CFG_NONSTAGREF_MSK
+
+#define GT_SDRAM_CFG_DUPCNTL_SHF	19
+#define GT_SDRAM_CFG_DUPCNTL_MSK	(MSK(1) << GT_SDRAM_CFG_DUPCNTL_SHF)
+#define GT_SDRAM_CFG_DUPCNTL_BIT	GT_SDRAM_CFG_DUPCNTL_MSK
+
+#define GT_SDRAM_CFG_DUPBA_SHF		20
+#define GT_SDRAM_CFG_DUPBA_MSK		(MSK(1) << GT_SDRAM_CFG_DUPBA_SHF)
+#define GT_SDRAM_CFG_DUPBA_BIT		GT_SDRAM_CFG_DUPBA_MSK
+
+#define GT_SDRAM_CFG_DUPEOT0_SHF	21
+#define GT_SDRAM_CFG_DUPEOT0_MSK	(MSK(1) << GT_SDRAM_CFG_DUPEOT0_SHF)
+#define GT_SDRAM_CFG_DUPEOT0_BIT	GT_SDRAM_CFG_DUPEOT0_MSK
+
+#define GT_SDRAM_CFG_DUPEOT1_SHF	22
+#define GT_SDRAM_CFG_DUPEOT1_MSK	(MSK(1) << GT_SDRAM_CFG_DUPEOT1_SHF)
+#define GT_SDRAM_CFG_DUPEOT1_BIT	GT_SDRAM_CFG_DUPEOT1_MSK
+
+#define GT_SDRAM_OPMODE_OP_SHF		0
+#define GT_SDRAM_OPMODE_OP_MSK		(MSK(3) << GT_SDRAM_OPMODE_OP_SHF)
+#define GT_SDRAM_OPMODE_OP_NORMAL	0
+#define GT_SDRAM_OPMODE_OP_NOP		1
+#define GT_SDRAM_OPMODE_OP_PRCHG	2
+#define GT_SDRAM_OPMODE_OP_MODE		3
+#define GT_SDRAM_OPMODE_OP_CBR		4
+
+#define GT_TC_CONTROL_ENTC0_SHF		0
+#define GT_TC_CONTROL_ENTC0_MSK		(MSK(1) << GT_TC_CONTROL_ENTC0_SHF)
+#define GT_TC_CONTROL_ENTC0_BIT		GT_TC_CONTROL_ENTC0_MSK
+#define GT_TC_CONTROL_SELTC0_SHF	1
+#define GT_TC_CONTROL_SELTC0_MSK	(MSK(1) << GT_TC_CONTROL_SELTC0_SHF)
+#define GT_TC_CONTROL_SELTC0_BIT	GT_TC_CONTROL_SELTC0_MSK
+
+
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_SHF	0
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_MSK	(MSK(1) << GT_PCI0_BARE_SWSCS3BOOTDIS_SHF)
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_BIT	GT_PCI0_BARE_SWSCS3BOOTDIS_MSK
+
+#define GT_PCI0_BARE_SWSCS32DIS_SHF	1
+#define GT_PCI0_BARE_SWSCS32DIS_MSK	(MSK(1) << GT_PCI0_BARE_SWSCS32DIS_SHF)
+#define GT_PCI0_BARE_SWSCS32DIS_BIT	GT_PCI0_BARE_SWSCS32DIS_MSK
+
+#define GT_PCI0_BARE_SWSCS10DIS_SHF	2
+#define GT_PCI0_BARE_SWSCS10DIS_MSK	(MSK(1) << GT_PCI0_BARE_SWSCS10DIS_SHF)
+#define GT_PCI0_BARE_SWSCS10DIS_BIT	GT_PCI0_BARE_SWSCS10DIS_MSK
+
+#define GT_PCI0_BARE_INTIODIS_SHF	3
+#define GT_PCI0_BARE_INTIODIS_MSK	(MSK(1) << GT_PCI0_BARE_INTIODIS_SHF)
+#define GT_PCI0_BARE_INTIODIS_BIT	GT_PCI0_BARE_INTIODIS_MSK
+
+#define GT_PCI0_BARE_INTMEMDIS_SHF	4
+#define GT_PCI0_BARE_INTMEMDIS_MSK	(MSK(1) << GT_PCI0_BARE_INTMEMDIS_SHF)
+#define GT_PCI0_BARE_INTMEMDIS_BIT	GT_PCI0_BARE_INTMEMDIS_MSK
+
+#define GT_PCI0_BARE_CS3BOOTDIS_SHF	5
+#define GT_PCI0_BARE_CS3BOOTDIS_MSK	(MSK(1) << GT_PCI0_BARE_CS3BOOTDIS_SHF)
+#define GT_PCI0_BARE_CS3BOOTDIS_BIT	GT_PCI0_BARE_CS3BOOTDIS_MSK
+
+#define GT_PCI0_BARE_CS20DIS_SHF	6
+#define GT_PCI0_BARE_CS20DIS_MSK	(MSK(1) << GT_PCI0_BARE_CS20DIS_SHF)
+#define GT_PCI0_BARE_CS20DIS_BIT	GT_PCI0_BARE_CS20DIS_MSK
+
+#define GT_PCI0_BARE_SCS32DIS_SHF	7
+#define GT_PCI0_BARE_SCS32DIS_MSK	(MSK(1) << GT_PCI0_BARE_SCS32DIS_SHF)
+#define GT_PCI0_BARE_SCS32DIS_BIT	GT_PCI0_BARE_SCS32DIS_MSK
+
+#define GT_PCI0_BARE_SCS10DIS_SHF	8
+#define GT_PCI0_BARE_SCS10DIS_MSK	(MSK(1) << GT_PCI0_BARE_SCS10DIS_SHF)
+#define GT_PCI0_BARE_SCS10DIS_BIT	GT_PCI0_BARE_SCS10DIS_MSK
+
+
+#define GT_INTRCAUSE_MASABORT0_SHF	18
+#define GT_INTRCAUSE_MASABORT0_MSK	(MSK(1) << GT_INTRCAUSE_MASABORT0_SHF)
+#define GT_INTRCAUSE_MASABORT0_BIT	GT_INTRCAUSE_MASABORT0_MSK
+
+#define GT_INTRCAUSE_TARABORT0_SHF	19
+#define GT_INTRCAUSE_TARABORT0_MSK	(MSK(1) << GT_INTRCAUSE_TARABORT0_SHF)
+#define GT_INTRCAUSE_TARABORT0_BIT	GT_INTRCAUSE_TARABORT0_MSK
+
+
+#define GT_PCI0_CFGADDR_REGNUM_SHF	2
+#define GT_PCI0_CFGADDR_REGNUM_MSK	(MSK(6) << GT_PCI0_CFGADDR_REGNUM_SHF)
+#define GT_PCI0_CFGADDR_FUNCTNUM_SHF	8
+#define GT_PCI0_CFGADDR_FUNCTNUM_MSK	(MSK(3) << GT_PCI0_CFGADDR_FUNCTNUM_SHF)
+#define GT_PCI0_CFGADDR_DEVNUM_SHF	11
+#define GT_PCI0_CFGADDR_DEVNUM_MSK	(MSK(5) << GT_PCI0_CFGADDR_DEVNUM_SHF)
+#define GT_PCI0_CFGADDR_BUSNUM_SHF	16
+#define GT_PCI0_CFGADDR_BUSNUM_MSK	(MSK(8) << GT_PCI0_CFGADDR_BUSNUM_SHF)
+#define GT_PCI0_CFGADDR_CONFIGEN_SHF	31
+#define GT_PCI0_CFGADDR_CONFIGEN_MSK	(MSK(1) << GT_PCI0_CFGADDR_CONFIGEN_SHF)
+#define GT_PCI0_CFGADDR_CONFIGEN_BIT	GT_PCI0_CFGADDR_CONFIGEN_MSK
+
+#define GT_PCI0_CMD_MBYTESWAP_SHF	0
+#define GT_PCI0_CMD_MBYTESWAP_MSK	(MSK(1) << GT_PCI0_CMD_MBYTESWAP_SHF)
+#define GT_PCI0_CMD_MBYTESWAP_BIT	GT_PCI0_CMD_MBYTESWAP_MSK
+#define GT_PCI0_CMD_MWORDSWAP_SHF	10
+#define GT_PCI0_CMD_MWORDSWAP_MSK	(MSK(1) << GT_PCI0_CMD_MWORDSWAP_SHF)
+#define GT_PCI0_CMD_MWORDSWAP_BIT	GT_PCI0_CMD_MWORDSWAP_MSK
+#define GT_PCI0_CMD_SBYTESWAP_SHF	16
+#define GT_PCI0_CMD_SBYTESWAP_MSK	(MSK(1) << GT_PCI0_CMD_SBYTESWAP_SHF)
+#define GT_PCI0_CMD_SBYTESWAP_BIT	GT_PCI0_CMD_SBYTESWAP_MSK
+#define GT_PCI0_CMD_SWORDSWAP_SHF	11
+#define GT_PCI0_CMD_SWORDSWAP_MSK	(MSK(1) << GT_PCI0_CMD_SWORDSWAP_SHF)
+#define GT_PCI0_CMD_SWORDSWAP_BIT	GT_PCI0_CMD_SWORDSWAP_MSK
+
+#define GT_INTR_T0EXP_SHF		8
+#define GT_INTR_T0EXP_MSK		(MSK(1) << GT_INTR_T0EXP_SHF)
+#define GT_INTR_T0EXP_BIT		GT_INTR_T0EXP_MSK
+#define GT_INTR_RETRYCTR0_SHF		20
+#define GT_INTR_RETRYCTR0_MSK		(MSK(1) << GT_INTR_RETRYCTR0_SHF)
+#define GT_INTR_RETRYCTR0_BIT		GT_INTR_RETRYCTR0_MSK
+
+/*
+ *  Misc
+ */
+#define GT_DEF_PCI0_IO_BASE	0x10000000UL
+#define GT_DEF_PCI0_IO_SIZE	0x02000000UL
+#define GT_DEF_PCI0_MEM0_BASE	0x12000000UL
+#define GT_DEF_PCI0_MEM0_SIZE	0x02000000UL
+#define GT_DEF_BASE		0x14000000UL
+
+#define GT_MAX_BANKSIZE		(256 * 1024 * 1024)	/* Max 256MB bank  */
+#define GT_LATTIM_MIN		6			/* Minimum lat  */
+
+/*
+ * The gt64120_dep.h file must define the following macros
+ *
+ *   GT_READ(ofs, data_pointer)
+ *   GT_WRITE(ofs, data)           - read/write GT64120 registers in 32bit
+ *
+ *   TIMER 	- gt64120 timer irq, temporary solution until
+ *		  full gt64120 cascade interrupt support is in place
+ */
+
+#include <mach-gt64120.h>
+
+/*
+ * Because of an error/peculiarity in the Galileo chip, we need to swap the
+ * bytes when running bigendian.  We also provide non-swapping versions.
+ */
+#define __GT_READ(ofs)							\
+	(*(volatile u32 *)(GT64120_BASE+(ofs)))
+#define __GT_WRITE(ofs, data)						\
+	do { *(volatile u32 *)(GT64120_BASE+(ofs)) = (data); } while (0)
+#define GT_READ(ofs)		le32_to_cpu(__GT_READ(ofs))
+#define GT_WRITE(ofs, data)	__GT_WRITE(ofs, cpu_to_le32(data))
+
+extern void gt641xx_set_base_clock(unsigned int clock);
+extern int gt641xx_timer0_state(void);
+
+#endif /* _ASM_GT64120_H */
diff --git a/arch/mips/include/asm/hardirq.h b/arch/mips/include/asm/hardirq.h
new file mode 100644
index 0000000..90bf399
--- /dev/null
+++ b/arch/mips/include/asm/hardirq.h
@@ -0,0 +1,24 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_HARDIRQ_H */
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
new file mode 100644
index 0000000..2de638f
--- /dev/null
+++ b/arch/mips/include/asm/hazards.h
@@ -0,0 +1,271 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) MIPS Technologies, Inc.
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef _ASM_HAZARDS_H
+#define _ASM_HAZARDS_H
+
+#ifdef __ASSEMBLY__
+#define ASMMACRO(name, code...) .macro name; code; .endm
+#else
+
+#include <asm/cpu-features.h>
+
+#define ASMMACRO(name, code...)						\
+__asm__(".macro " #name "; " #code "; .endm");				\
+									\
+static inline void name(void)						\
+{									\
+	__asm__ __volatile__ (#name);					\
+}
+
+/*
+ * MIPS R2 instruction hazard barrier.   Needs to be called as a subroutine.
+ */
+extern void mips_ihb(void);
+
+#endif
+
+ASMMACRO(_ssnop,
+	 sll	$0, $0, 1
+	)
+
+ASMMACRO(_ehb,
+	 sll	$0, $0, 3
+	)
+
+/*
+ * TLB hazards
+ */
+#if defined(CONFIG_CPU_MIPSR2)
+
+/*
+ * MIPSR2 defines ehb for hazard avoidance
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+	 _ehb
+	)
+ASMMACRO(tlbw_use_hazard,
+	 _ehb
+	)
+ASMMACRO(tlb_probe_hazard,
+	 _ehb
+	)
+ASMMACRO(irq_enable_hazard,
+	 _ehb
+	)
+ASMMACRO(irq_disable_hazard,
+	_ehb
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	 _ehb
+	)
+/*
+ * gcc has a tradition of misscompiling the previous construct using the
+ * address of a label as argument to inline assembler.  Gas otoh has the
+ * annoying difference between la and dla which are only usable for 32-bit
+ * rsp. 64-bit code, so can't be used without conditional compilation.
+ * The alterantive is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code ...
+ */
+#define instruction_hazard()						\
+do {									\
+	unsigned long tmp;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	mips64r2				\n"	\
+	"	dla	%0, 1f					\n"	\
+	"	jr.hb	%0					\n"	\
+	"	.set	mips0					\n"	\
+	"1:							\n"	\
+	: "=r" (tmp));							\
+} while (0)
+
+#elif defined(CONFIG_CPU_MIPSR1)
+
+/*
+ * These are slightly complicated by the fact that we guarantee R1 kernels to
+ * run fine on R2 processors.
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+	_ssnop; _ssnop; _ehb
+	)
+ASMMACRO(tlbw_use_hazard,
+	_ssnop; _ssnop; _ssnop; _ehb
+	)
+ASMMACRO(tlb_probe_hazard,
+	 _ssnop; _ssnop; _ssnop; _ehb
+	)
+ASMMACRO(irq_enable_hazard,
+	 _ssnop; _ssnop; _ssnop; _ehb
+	)
+ASMMACRO(irq_disable_hazard,
+	_ssnop; _ssnop; _ssnop; _ehb
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	 _ssnop; _ssnop; _ssnop; _ehb
+	)
+/*
+ * gcc has a tradition of misscompiling the previous construct using the
+ * address of a label as argument to inline assembler.  Gas otoh has the
+ * annoying difference between la and dla which are only usable for 32-bit
+ * rsp. 64-bit code, so can't be used without conditional compilation.
+ * The alterantive is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code ...
+ */
+#define __instruction_hazard()						\
+do {									\
+	unsigned long tmp;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	mips64r2				\n"	\
+	"	dla	%0, 1f					\n"	\
+	"	jr.hb	%0					\n"	\
+	"	.set	mips0					\n"	\
+	"1:							\n"	\
+	: "=r" (tmp));							\
+} while (0)
+
+#define instruction_hazard()						\
+do {									\
+	if (cpu_has_mips_r2)						\
+		__instruction_hazard();					\
+} while (0)
+
+#elif defined(CONFIG_CPU_R10000)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+	)
+ASMMACRO(tlbw_use_hazard,
+	)
+ASMMACRO(tlb_probe_hazard,
+	)
+ASMMACRO(irq_enable_hazard,
+	)
+ASMMACRO(irq_disable_hazard,
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	)
+#define instruction_hazard() do { } while (0)
+
+#elif defined(CONFIG_CPU_RM9000)
+
+/*
+ * RM9000 hazards.  When the JTLB is updated by tlbwi or tlbwr, a subsequent
+ * use of the JTLB for instructions should not occur for 4 cpu cycles and use
+ * for data translations should not occur for 3 cpu cycles.
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+	 _ssnop; _ssnop; _ssnop; _ssnop
+	)
+ASMMACRO(tlbw_use_hazard,
+	 _ssnop; _ssnop; _ssnop; _ssnop
+	)
+ASMMACRO(tlb_probe_hazard,
+	 _ssnop; _ssnop; _ssnop; _ssnop
+	)
+ASMMACRO(irq_enable_hazard,
+	)
+ASMMACRO(irq_disable_hazard,
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	)
+#define instruction_hazard() do { } while (0)
+
+#elif defined(CONFIG_CPU_SB1)
+
+/*
+ * Mostly like R4000 for historic reasons
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+	)
+ASMMACRO(tlbw_use_hazard,
+	)
+ASMMACRO(tlb_probe_hazard,
+	)
+ASMMACRO(irq_enable_hazard,
+	)
+ASMMACRO(irq_disable_hazard,
+	 _ssnop; _ssnop; _ssnop
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	)
+#define instruction_hazard() do { } while (0)
+
+#else
+
+/*
+ * Finally the catchall case for all other processors including R4000, R4400,
+ * R4600, R4700, R5000, RM7000, NEC VR41xx etc.
+ *
+ * The taken branch will result in a two cycle penalty for the two killed
+ * instructions on R4000 / R4400.  Other processors only have a single cycle
+ * hazard so this is nice trick to have an optimal code for a range of
+ * processors.
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+	nop; nop
+	)
+ASMMACRO(tlbw_use_hazard,
+	nop; nop; nop
+	)
+ASMMACRO(tlb_probe_hazard,
+	 nop; nop; nop
+	)
+ASMMACRO(irq_enable_hazard,
+	 _ssnop; _ssnop; _ssnop;
+	)
+ASMMACRO(irq_disable_hazard,
+	nop; nop; nop
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	 _ssnop; _ssnop; _ssnop;
+	)
+#define instruction_hazard() do { } while (0)
+
+#endif
+
+
+/* FPU hazards */
+
+#if defined(CONFIG_CPU_SB1)
+ASMMACRO(enable_fpu_hazard,
+	 .set	push;
+	 .set	mips64;
+	 .set	noreorder;
+	 _ssnop;
+	 bnezl	$0, .+4;
+	 _ssnop;
+	 .set	pop
+)
+ASMMACRO(disable_fpu_hazard,
+)
+
+#elif defined(CONFIG_CPU_MIPSR2)
+ASMMACRO(enable_fpu_hazard,
+	 _ehb
+)
+ASMMACRO(disable_fpu_hazard,
+	 _ehb
+)
+#else
+ASMMACRO(enable_fpu_hazard,
+	 nop; nop; nop; nop
+)
+ASMMACRO(disable_fpu_hazard,
+	 _ehb
+)
+#endif
+
+#endif /* _ASM_HAZARDS_H */
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
new file mode 100644
index 0000000..4374ab2
--- /dev/null
+++ b/arch/mips/include/asm/highmem.h
@@ -0,0 +1,67 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <asm/kmap_types.h>
+
+/* undef for production */
+#define HIGHMEM_DEBUG 1
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define LAST_PKMAP 1024
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void * kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *__kmap(struct page *page);
+extern void __kunmap(struct page *page);
+extern void *__kmap_atomic(struct page *page, enum km_type type);
+extern void __kunmap_atomic(void *kvaddr, enum km_type type);
+extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+extern struct page *__kmap_atomic_to_page(void *ptr);
+
+#define kmap			__kmap
+#define kunmap			__kunmap
+#define kmap_atomic		__kmap_atomic
+#define kunmap_atomic		__kunmap_atomic
+#define kmap_atomic_to_page	__kmap_atomic_to_page
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/mips/include/asm/hw_irq.h b/arch/mips/include/asm/hw_irq.h
new file mode 100644
index 0000000..aca05a4
--- /dev/null
+++ b/arch/mips/include/asm/hw_irq.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 2001, 2002 by Ralf Baechle
+ */
+#ifndef __ASM_HW_IRQ_H
+#define __ASM_HW_IRQ_H
+
+#include <asm/atomic.h>
+
+extern atomic_t irq_err_count;
+
+/*
+ * interrupt-retrigger: NOP for now. This may not be apropriate for all
+ * machines, we'll see ...
+ */
+
+#endif /* __ASM_HW_IRQ_H */
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
new file mode 100644
index 0000000..5dabc87
--- /dev/null
+++ b/arch/mips/include/asm/i8253.h
@@ -0,0 +1,21 @@
+/*
+ *  Machine specific IO port address definition for generic.
+ *  Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef __ASM_I8253_H
+#define __ASM_I8253_H
+
+#include <linux/spinlock.h>
+
+/* i8253A PIT registers */
+#define PIT_MODE		0x43
+#define PIT_CH0			0x40
+#define PIT_CH2			0x42
+
+#define PIT_TICK_RATE		1193182UL
+
+extern spinlock_t i8253_lock;
+
+extern void setup_pit_timer(void);
+
+#endif /* __ASM_I8253_H */
diff --git a/arch/mips/include/asm/i8259.h b/arch/mips/include/asm/i8259.h
new file mode 100644
index 0000000..8572a2d
--- /dev/null
+++ b/arch/mips/include/asm/i8259.h
@@ -0,0 +1,86 @@
+/*
+ *	include/asm-mips/i8259.h
+ *
+ *	i8259A interrupt definitions.
+ *
+ *	Copyright (C) 2003  Maciej W. Rozycki
+ *	Copyright (C) 2003  Ralf Baechle <ralf@linux-mips.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_I8259_H
+#define _ASM_I8259_H
+
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <irq.h>
+
+/* i8259A PIC registers */
+#define PIC_MASTER_CMD		0x20
+#define PIC_MASTER_IMR		0x21
+#define PIC_MASTER_ISR		PIC_MASTER_CMD
+#define PIC_MASTER_POLL		PIC_MASTER_ISR
+#define PIC_MASTER_OCW3		PIC_MASTER_ISR
+#define PIC_SLAVE_CMD		0xa0
+#define PIC_SLAVE_IMR		0xa1
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR		2
+#define MASTER_ICW4_DEFAULT	0x01
+#define SLAVE_ICW4_DEFAULT	0x01
+#define PIC_ICW4_AEOI		2
+
+extern spinlock_t i8259A_lock;
+
+extern int i8259A_irq_pending(unsigned int irq);
+extern void make_8259A_irq(unsigned int irq);
+
+extern void init_i8259_irqs(void);
+
+/*
+ * Do the traditional i8259 interrupt polling thing.  This is for the few
+ * cases where no better interrupt acknowledge method is available and we
+ * absolutely must touch the i8259.
+ */
+static inline int i8259_irq(void)
+{
+	int irq;
+
+	spin_lock(&i8259A_lock);
+
+	/* Perform an interrupt acknowledge cycle on controller 1. */
+	outb(0x0C, PIC_MASTER_CMD);		/* prepare for poll */
+	irq = inb(PIC_MASTER_CMD) & 7;
+	if (irq == PIC_CASCADE_IR) {
+		/*
+		 * Interrupt is cascaded so perform interrupt
+		 * acknowledge on controller 2.
+		 */
+		outb(0x0C, PIC_SLAVE_CMD);		/* prepare for poll */
+		irq = (inb(PIC_SLAVE_CMD) & 7) + 8;
+	}
+
+	if (unlikely(irq == 7)) {
+		/*
+		 * This may be a spurious interrupt.
+		 *
+		 * Read the interrupt status register (ISR). If the most
+		 * significant bit is not set then there is no valid
+		 * interrupt.
+		 */
+		outb(0x0B, PIC_MASTER_ISR);		/* ISR register */
+		if(~inb(PIC_MASTER_ISR) & 0x80)
+			irq = -1;
+	}
+
+	spin_unlock(&i8259A_lock);
+
+	return likely(irq >= 0) ? irq + I8259A_IRQ_BASE : irq;
+}
+
+#endif /* _ASM_I8259_H */
diff --git a/arch/mips/include/asm/ide.h b/arch/mips/include/asm/ide.h
new file mode 100644
index 0000000..bb674c3
--- /dev/null
+++ b/arch/mips/include/asm/ide.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file contains the MIPS architecture specific IDE code.
+ */
+#ifndef __ASM_IDE_H
+#define __ASM_IDE_H
+
+#include <ide.h>
+
+#endif /* __ASM_IDE_H */
diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h
new file mode 100644
index 0000000..6489f00
--- /dev/null
+++ b/arch/mips/include/asm/inst.h
@@ -0,0 +1,394 @@
+/*
+ * Format of an instruction in memory.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 2000 by Ralf Baechle
+ * Copyright (C) 2006 by Thiemo Seufer
+ */
+#ifndef _ASM_INST_H
+#define _ASM_INST_H
+
+/*
+ * Major opcodes; before MIPS IV cop1x was called cop3.
+ */
+enum major_op {
+	spec_op, bcond_op, j_op, jal_op,
+	beq_op, bne_op, blez_op, bgtz_op,
+	addi_op, addiu_op, slti_op, sltiu_op,
+	andi_op, ori_op, xori_op, lui_op,
+	cop0_op, cop1_op, cop2_op, cop1x_op,
+	beql_op, bnel_op, blezl_op, bgtzl_op,
+	daddi_op, daddiu_op, ldl_op, ldr_op,
+	spec2_op, jalx_op, mdmx_op, spec3_op,
+	lb_op, lh_op, lwl_op, lw_op,
+	lbu_op, lhu_op, lwr_op, lwu_op,
+	sb_op, sh_op, swl_op, sw_op,
+	sdl_op, sdr_op, swr_op, cache_op,
+	ll_op, lwc1_op, lwc2_op, pref_op,
+	lld_op, ldc1_op, ldc2_op, ld_op,
+	sc_op, swc1_op, swc2_op, major_3b_op,
+	scd_op, sdc1_op, sdc2_op, sd_op
+};
+
+/*
+ * func field of spec opcode.
+ */
+enum spec_op {
+	sll_op, movc_op, srl_op, sra_op,
+	sllv_op, pmon_op, srlv_op, srav_op,
+	jr_op, jalr_op, movz_op, movn_op,
+	syscall_op, break_op, spim_op, sync_op,
+	mfhi_op, mthi_op, mflo_op, mtlo_op,
+	dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op,
+	mult_op, multu_op, div_op, divu_op,
+	dmult_op, dmultu_op, ddiv_op, ddivu_op,
+	add_op, addu_op, sub_op, subu_op,
+	and_op, or_op, xor_op, nor_op,
+	spec3_unused_op, spec4_unused_op, slt_op, sltu_op,
+	dadd_op, daddu_op, dsub_op, dsubu_op,
+	tge_op, tgeu_op, tlt_op, tltu_op,
+	teq_op, spec5_unused_op, tne_op, spec6_unused_op,
+	dsll_op, spec7_unused_op, dsrl_op, dsra_op,
+	dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op
+};
+
+/*
+ * func field of spec2 opcode.
+ */
+enum spec2_op {
+	madd_op, maddu_op, mul_op, spec2_3_unused_op,
+	msub_op, msubu_op, /* more unused ops */
+	clz_op = 0x20, clo_op,
+	dclz_op = 0x24, dclo_op,
+	sdbpp_op = 0x3f
+};
+
+/*
+ * func field of spec3 opcode.
+ */
+enum spec3_op {
+	ext_op, dextm_op, dextu_op, dext_op,
+	ins_op, dinsm_op, dinsu_op, dins_op,
+	bshfl_op = 0x20,
+	dbshfl_op = 0x24,
+	rdhwr_op = 0x3b
+};
+
+/*
+ * rt field of bcond opcodes.
+ */
+enum rt_op {
+	bltz_op, bgez_op, bltzl_op, bgezl_op,
+	spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07,
+	tgei_op, tgeiu_op, tlti_op, tltiu_op,
+	teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op,
+	bltzal_op, bgezal_op, bltzall_op, bgezall_op,
+	rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17,
+	rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b,
+	bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f
+};
+
+/*
+ * rs field of cop opcodes.
+ */
+enum cop_op {
+	mfc_op        = 0x00, dmfc_op       = 0x01,
+	cfc_op        = 0x02, mtc_op        = 0x04,
+	dmtc_op       = 0x05, ctc_op        = 0x06,
+	bc_op         = 0x08, cop_op        = 0x10,
+	copm_op       = 0x18
+};
+
+/*
+ * rt field of cop.bc_op opcodes
+ */
+enum bcop_op {
+	bcf_op, bct_op, bcfl_op, bctl_op
+};
+
+/*
+ * func field of cop0 coi opcodes.
+ */
+enum cop0_coi_func {
+	tlbr_op       = 0x01, tlbwi_op      = 0x02,
+	tlbwr_op      = 0x06, tlbp_op       = 0x08,
+	rfe_op        = 0x10, eret_op       = 0x18
+};
+
+/*
+ * func field of cop0 com opcodes.
+ */
+enum cop0_com_func {
+	tlbr1_op      = 0x01, tlbw_op       = 0x02,
+	tlbp1_op      = 0x08, dctr_op       = 0x09,
+	dctw_op       = 0x0a
+};
+
+/*
+ * fmt field of cop1 opcodes.
+ */
+enum cop1_fmt {
+	s_fmt, d_fmt, e_fmt, q_fmt,
+	w_fmt, l_fmt
+};
+
+/*
+ * func field of cop1 instructions using d, s or w format.
+ */
+enum cop1_sdw_func {
+	fadd_op      =  0x00, fsub_op      =  0x01,
+	fmul_op      =  0x02, fdiv_op      =  0x03,
+	fsqrt_op     =  0x04, fabs_op      =  0x05,
+	fmov_op      =  0x06, fneg_op      =  0x07,
+	froundl_op   =  0x08, ftruncl_op   =  0x09,
+	fceill_op    =  0x0a, ffloorl_op   =  0x0b,
+	fround_op    =  0x0c, ftrunc_op    =  0x0d,
+	fceil_op     =  0x0e, ffloor_op    =  0x0f,
+	fmovc_op     =  0x11, fmovz_op     =  0x12,
+	fmovn_op     =  0x13, frecip_op    =  0x15,
+	frsqrt_op    =  0x16, fcvts_op     =  0x20,
+	fcvtd_op     =  0x21, fcvte_op     =  0x22,
+	fcvtw_op     =  0x24, fcvtl_op     =  0x25,
+	fcmp_op      =  0x30
+};
+
+/*
+ * func field of cop1x opcodes (MIPS IV).
+ */
+enum cop1x_func {
+	lwxc1_op     =  0x00, ldxc1_op     =  0x01,
+	pfetch_op    =  0x07, swxc1_op     =  0x08,
+	sdxc1_op     =  0x09, madd_s_op    =  0x20,
+	madd_d_op    =  0x21, madd_e_op    =  0x22,
+	msub_s_op    =  0x28, msub_d_op    =  0x29,
+	msub_e_op    =  0x2a, nmadd_s_op   =  0x30,
+	nmadd_d_op   =  0x31, nmadd_e_op   =  0x32,
+	nmsub_s_op   =  0x38, nmsub_d_op   =  0x39,
+	nmsub_e_op   =  0x3a
+};
+
+/*
+ * func field for mad opcodes (MIPS IV).
+ */
+enum mad_func {
+	madd_fp_op      = 0x08, msub_fp_op      = 0x0a,
+	nmadd_fp_op     = 0x0c, nmsub_fp_op     = 0x0e
+};
+
+/*
+ * Damn ...  bitfields depend from byteorder :-(
+ */
+#ifdef __MIPSEB__
+struct j_format {	/* Jump format */
+	unsigned int opcode : 6;
+	unsigned int target : 26;
+};
+
+struct i_format {	/* Immediate format (addi, lw, ...) */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	signed int simmediate : 16;
+};
+
+struct u_format {	/* Unsigned immediate format (ori, xori, ...) */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	unsigned int uimmediate : 16;
+};
+
+struct c_format {	/* Cache (>= R6000) format */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int c_op : 3;
+	unsigned int cache : 2;
+	unsigned int simmediate : 16;
+};
+
+struct r_format {	/* Register format */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	unsigned int rd : 5;
+	unsigned int re : 5;
+	unsigned int func : 6;
+};
+
+struct p_format {	/* Performance counter format (R10000) */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	unsigned int rd : 5;
+	unsigned int re : 5;
+	unsigned int func : 6;
+};
+
+struct f_format {	/* FPU register format */
+	unsigned int opcode : 6;
+	unsigned int : 1;
+	unsigned int fmt : 4;
+	unsigned int rt : 5;
+	unsigned int rd : 5;
+	unsigned int re : 5;
+	unsigned int func : 6;
+};
+
+struct ma_format {	/* FPU multipy and add format (MIPS IV) */
+	unsigned int opcode : 6;
+	unsigned int fr : 5;
+	unsigned int ft : 5;
+	unsigned int fs : 5;
+	unsigned int fd : 5;
+	unsigned int func : 4;
+	unsigned int fmt : 2;
+};
+
+#elif defined(__MIPSEL__)
+
+struct j_format {	/* Jump format */
+	unsigned int target : 26;
+	unsigned int opcode : 6;
+};
+
+struct i_format {	/* Immediate format */
+	signed int simmediate : 16;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct u_format {	/* Unsigned immediate format */
+	unsigned int uimmediate : 16;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct c_format {	/* Cache (>= R6000) format */
+	unsigned int simmediate : 16;
+	unsigned int cache : 2;
+	unsigned int c_op : 3;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct r_format {	/* Register format */
+	unsigned int func : 6;
+	unsigned int re : 5;
+	unsigned int rd : 5;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct p_format {	/* Performance counter format (R10000) */
+	unsigned int func : 6;
+	unsigned int re : 5;
+	unsigned int rd : 5;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct f_format {	/* FPU register format */
+	unsigned int func : 6;
+	unsigned int re : 5;
+	unsigned int rd : 5;
+	unsigned int rt : 5;
+	unsigned int fmt : 4;
+	unsigned int : 1;
+	unsigned int opcode : 6;
+};
+
+struct ma_format {	/* FPU multipy and add format (MIPS IV) */
+	unsigned int fmt : 2;
+	unsigned int func : 4;
+	unsigned int fd : 5;
+	unsigned int fs : 5;
+	unsigned int ft : 5;
+	unsigned int fr : 5;
+	unsigned int opcode : 6;
+};
+
+#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */
+#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?"
+#endif
+
+union mips_instruction {
+	unsigned int word;
+	unsigned short halfword[2];
+	unsigned char byte[4];
+	struct j_format j_format;
+	struct i_format i_format;
+	struct u_format u_format;
+	struct c_format c_format;
+	struct r_format r_format;
+	struct f_format f_format;
+        struct ma_format ma_format;
+};
+
+/* HACHACHAHCAHC ...  */
+
+/* In case some other massaging is needed, keep MIPSInst as wrapper */
+
+#define MIPSInst(x) x
+
+#define I_OPCODE_SFT	26
+#define MIPSInst_OPCODE(x) (MIPSInst(x) >> I_OPCODE_SFT)
+
+#define I_JTARGET_SFT	0
+#define MIPSInst_JTARGET(x) (MIPSInst(x) & 0x03ffffff)
+
+#define I_RS_SFT	21
+#define MIPSInst_RS(x) ((MIPSInst(x) & 0x03e00000) >> I_RS_SFT)
+
+#define I_RT_SFT	16
+#define MIPSInst_RT(x) ((MIPSInst(x) & 0x001f0000) >> I_RT_SFT)
+
+#define I_IMM_SFT	0
+#define MIPSInst_SIMM(x) ((int)((short)(MIPSInst(x) & 0xffff)))
+#define MIPSInst_UIMM(x) (MIPSInst(x) & 0xffff)
+
+#define I_CACHEOP_SFT	18
+#define MIPSInst_CACHEOP(x) ((MIPSInst(x) & 0x001c0000) >> I_CACHEOP_SFT)
+
+#define I_CACHESEL_SFT	16
+#define MIPSInst_CACHESEL(x) ((MIPSInst(x) & 0x00030000) >> I_CACHESEL_SFT)
+
+#define I_RD_SFT	11
+#define MIPSInst_RD(x) ((MIPSInst(x) & 0x0000f800) >> I_RD_SFT)
+
+#define I_RE_SFT	6
+#define MIPSInst_RE(x) ((MIPSInst(x) & 0x000007c0) >> I_RE_SFT)
+
+#define I_FUNC_SFT	0
+#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f)
+
+#define I_FFMT_SFT	21
+#define MIPSInst_FFMT(x) ((MIPSInst(x) & 0x01e00000) >> I_FFMT_SFT)
+
+#define I_FT_SFT	16
+#define MIPSInst_FT(x) ((MIPSInst(x) & 0x001f0000) >> I_FT_SFT)
+
+#define I_FS_SFT	11
+#define MIPSInst_FS(x) ((MIPSInst(x) & 0x0000f800) >> I_FS_SFT)
+
+#define I_FD_SFT	6
+#define MIPSInst_FD(x) ((MIPSInst(x) & 0x000007c0) >> I_FD_SFT)
+
+#define I_FR_SFT	21
+#define MIPSInst_FR(x) ((MIPSInst(x) & 0x03e00000) >> I_FR_SFT)
+
+#define I_FMA_FUNC_SFT	2
+#define MIPSInst_FMA_FUNC(x) ((MIPSInst(x) & 0x0000003c) >> I_FMA_FUNC_SFT)
+
+#define I_FMA_FFMT_SFT	0
+#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000003)
+
+typedef unsigned int mips_instruction;
+
+#endif /* _ASM_INST_H */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
new file mode 100644
index 0000000..501a40b
--- /dev/null
+++ b/arch/mips/include/asm/io.h
@@ -0,0 +1,589 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf GmbH
+ * Copyright (C) 1994 - 2000, 06 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004, 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Author:	Maciej W. Rozycki <macro@mips.com>
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm-generic/iomap.h>
+#include <asm/page.h>
+#include <asm/pgtable-bits.h>
+#include <asm/processor.h>
+#include <asm/string.h>
+
+#include <ioremap.h>
+#include <mangle-port.h>
+
+/*
+ * Slowdown I/O port space accesses for antique hardware.
+ */
+#undef CONF_SLOWDOWN_IO
+
+/*
+ * Raw operations are never swapped in software.  OTOH values that raw
+ * operations are working on may or may not have been swapped by the bus
+ * hardware.  An example use would be for flash memory that's used for
+ * execute in place.
+ */
+# define __raw_ioswabb(a, x)	(x)
+# define __raw_ioswabw(a, x)	(x)
+# define __raw_ioswabl(a, x)	(x)
+# define __raw_ioswabq(a, x)	(x)
+# define ____raw_ioswabq(a, x)	(x)
+
+/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * On MIPS I/O ports are memory mapped, so we access them using normal
+ * load/store instructions. mips_io_port_base is the virtual address to
+ * which all ports are being mapped.  For sake of efficiency some code
+ * assumes that this is an address that can be loaded with a single lui
+ * instruction, so the lower 16 bits must be zero.  Should be true on
+ * on any sane architecture; generic code does not use this assumption.
+ */
+extern const unsigned long mips_io_port_base;
+
+/*
+ * Gcc will generate code to load the value of mips_io_port_base after each
+ * function call which may be fairly wasteful in some cases.  So we don't
+ * play quite by the book.  We tell gcc mips_io_port_base is a long variable
+ * which solves the code generation issue.  Now we need to violate the
+ * aliasing rules a little to make initialization possible and finally we
+ * will need the barrier() to fight side effects of the aliasing chat.
+ * This trickery will eventually collapse under gcc's optimizer.  Oh well.
+ */
+static inline void set_io_port_base(unsigned long base)
+{
+	* (unsigned long *) &mips_io_port_base = base;
+	barrier();
+}
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ *
+ */
+
+#define __SLOW_DOWN_IO \
+	__asm__ __volatile__( \
+		"sb\t$0,0x80(%0)" \
+		: : "r" (mips_io_port_base));
+
+#ifdef CONF_SLOWDOWN_IO
+#ifdef REALLY_SLOW_IO
+#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
+#else
+#define SLOW_DOWN_IO __SLOW_DOWN_IO
+#endif
+#else
+#define SLOW_DOWN_IO
+#endif
+
+/*
+ *     virt_to_phys    -       map virtual addresses to physical
+ *     @address: address to remap
+ *
+ *     The returned physical address is the physical (CPU) mapping for
+ *     the memory address given. It is only valid to use this function on
+ *     addresses directly mapped or allocated via kmalloc.
+ *
+ *     This function does not give bus mappings for DMA transfers. In
+ *     almost all conceivable cases a device driver should not be using
+ *     this function
+ */
+static inline unsigned long virt_to_phys(volatile const void *address)
+{
+	return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET;
+}
+
+/*
+ *     phys_to_virt    -       map physical address to virtual
+ *     @address: address to remap
+ *
+ *     The returned virtual address is a current CPU mapping for
+ *     the memory address given. It is only valid to use this function on
+ *     addresses that have a kernel mapping
+ *
+ *     This function does not handle bus mappings for DMA transfers. In
+ *     almost all conceivable cases a device driver should not be using
+ *     this function
+ */
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
+}
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+static inline unsigned long isa_virt_to_bus(volatile void * address)
+{
+	return (unsigned long)address - PAGE_OFFSET;
+}
+
+static inline void * isa_bus_to_virt(unsigned long address)
+{
+	return (void *)(address + PAGE_OFFSET);
+}
+
+#define isa_page_to_bus page_to_phys
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them for x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)	((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
+extern void __iounmap(const volatile void __iomem *addr);
+
+static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	void __iomem *addr = plat_ioremap(offset, size, flags);
+
+	if (addr)
+		return addr;
+
+#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
+
+	if (cpu_has_64bit_addresses) {
+		u64 base = UNCAC_BASE;
+
+		/*
+		 * R10000 supports a 2 bit uncached attribute therefore
+		 * UNCAC_BASE may not equal IO_BASE.
+		 */
+		if (flags == _CACHE_UNCACHED)
+			base = (u64) IO_BASE;
+		return (void __iomem *) (unsigned long) (base + offset);
+	} else if (__builtin_constant_p(offset) &&
+		   __builtin_constant_p(size) && __builtin_constant_p(flags)) {
+		phys_t phys_addr, last_addr;
+
+		phys_addr = fixup_bigphys_addr(offset, size);
+
+		/* Don't allow wraparound or zero size. */
+		last_addr = phys_addr + size - 1;
+		if (!size || last_addr < phys_addr)
+			return NULL;
+
+		/*
+		 * Map uncached objects in the low 512MB of address
+		 * space using KSEG1.
+		 */
+		if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
+		    flags == _CACHE_UNCACHED)
+			return (void __iomem *)
+				(unsigned long)CKSEG1ADDR(phys_addr);
+	}
+
+	return __ioremap(offset, size, flags);
+
+#undef __IS_LOW512
+}
+
+/*
+ * ioremap     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ */
+#define ioremap(offset, size)						\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+
+/*
+ * ioremap_nocache     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked uncachable
+ * on the CPU as well as honouring existing caching rules from things like
+ * the PCI bus. Note that there are other caches and buffers on many
+ * busses. In paticular driver authors should read up on PCI writes
+ *
+ * It's useful if some control registers are in such an area and
+ * write combining or read caching is not desirable:
+ */
+#define ioremap_nocache(offset, size)					\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+
+/*
+ * ioremap_cachable -   map bus memory into CPU space
+ * @offset:         bus address of the memory
+ * @size:           size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked cachable by
+ * the CPU.  Also enables full write-combining.  Useful for some
+ * memory-like regions on I/O busses.
+ */
+#define ioremap_cachable(offset, size)					\
+	__ioremap_mode((offset), (size), _page_cachable_default)
+
+/*
+ * These two are MIPS specific ioremap variant.  ioremap_cacheable_cow
+ * requests a cachable mapping, ioremap_uncached_accelerated requests a
+ * mapping using the uncached accelerated mode which isn't supported on
+ * all processors.
+ */
+#define ioremap_cacheable_cow(offset, size)				\
+	__ioremap_mode((offset), (size), _CACHE_CACHABLE_COW)
+#define ioremap_uncached_accelerated(offset, size)			\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED)
+
+static inline void iounmap(const volatile void __iomem *addr)
+{
+	if (plat_iounmap(addr))
+		return;
+
+#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
+
+	if (cpu_has_64bit_addresses ||
+	    (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
+		return;
+
+	__iounmap(addr);
+
+#undef __IS_KSEG1
+}
+
+#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq)			\
+									\
+static inline void pfx##write##bwlq(type val,				\
+				    volatile void __iomem *mem)		\
+{									\
+	volatile type *__mem;						\
+	type __val;							\
+									\
+	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
+									\
+	__val = pfx##ioswab##bwlq(__mem, val);				\
+									\
+	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
+		*__mem = __val;						\
+	else if (cpu_has_64bits) {					\
+		unsigned long __flags;					\
+		type __tmp;						\
+									\
+		if (irq)						\
+			local_irq_save(__flags);			\
+		__asm__ __volatile__(					\
+			".set	mips3"		"\t\t# __writeq""\n\t"	\
+			"dsll32	%L0, %L0, 0"			"\n\t"	\
+			"dsrl32	%L0, %L0, 0"			"\n\t"	\
+			"dsll32	%M0, %M0, 0"			"\n\t"	\
+			"or	%L0, %L0, %M0"			"\n\t"	\
+			"sd	%L0, %2"			"\n\t"	\
+			".set	mips0"				"\n"	\
+			: "=r" (__tmp)					\
+			: "0" (__val), "m" (*__mem));			\
+		if (irq)						\
+			local_irq_restore(__flags);			\
+	} else								\
+		BUG();							\
+}									\
+									\
+static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
+{									\
+	volatile type *__mem;						\
+	type __val;							\
+									\
+	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
+									\
+	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
+		__val = *__mem;						\
+	else if (cpu_has_64bits) {					\
+		unsigned long __flags;					\
+									\
+		if (irq)						\
+			local_irq_save(__flags);			\
+		__asm__ __volatile__(					\
+			".set	mips3"		"\t\t# __readq"	"\n\t"	\
+			"ld	%L0, %1"			"\n\t"	\
+			"dsra32	%M0, %L0, 0"			"\n\t"	\
+			"sll	%L0, %L0, 0"			"\n\t"	\
+			".set	mips0"				"\n"	\
+			: "=r" (__val)					\
+			: "m" (*__mem));				\
+		if (irq)						\
+			local_irq_restore(__flags);			\
+	} else {							\
+		__val = 0;						\
+		BUG();							\
+	}								\
+									\
+	return pfx##ioswab##bwlq(__mem, __val);				\
+}
+
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow)			\
+									\
+static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
+									\
+	__val = pfx##ioswab##bwlq(__addr, val);				\
+									\
+	/* Really, we want this to be atomic */				\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	*__addr = __val;						\
+	slow;								\
+}									\
+									\
+static inline type pfx##in##bwlq##p(unsigned long port)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	__val = *__addr;						\
+	slow;								\
+									\
+	return pfx##ioswab##bwlq(__addr, __val);			\
+}
+
+#define __BUILD_MEMORY_PFX(bus, bwlq, type)				\
+									\
+__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
+
+#define BUILDIO_MEM(bwlq, type)						\
+									\
+__BUILD_MEMORY_PFX(__raw_, bwlq, type)					\
+__BUILD_MEMORY_PFX(, bwlq, type)					\
+__BUILD_MEMORY_PFX(__mem_, bwlq, type)					\
+
+BUILDIO_MEM(b, u8)
+BUILDIO_MEM(w, u16)
+BUILDIO_MEM(l, u32)
+BUILDIO_MEM(q, u64)
+
+#define __BUILD_IOPORT_PFX(bus, bwlq, type)				\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,)			\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwlq, type)					\
+	__BUILD_IOPORT_PFX(, bwlq, type)				\
+	__BUILD_IOPORT_PFX(__mem_, bwlq, type)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+#ifdef CONFIG_64BIT
+BUILDIO_IOPORT(q, u64)
+#endif
+
+#define __BUILDIO(bwlq, type)						\
+									\
+__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
+
+__BUILDIO(q, u64)
+
+#define readb_relaxed			readb
+#define readw_relaxed			readw
+#define readl_relaxed			readl
+#define readq_relaxed			readq
+
+/*
+ * Some code tests for these symbols
+ */
+#define readq				readq
+#define writeq				writeq
+
+#define __BUILD_MEMORY_STRING(bwlq, type)				\
+									\
+static inline void writes##bwlq(volatile void __iomem *mem,		\
+				const void *addr, unsigned int count)	\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		__mem_write##bwlq(*__addr, mem);			\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
+			       unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __mem_read##bwlq(mem);			\
+		__addr++;						\
+	}								\
+}
+
+#define __BUILD_IOPORT_STRING(bwlq, type)				\
+									\
+static inline void outs##bwlq(unsigned long port, const void *addr,	\
+			      unsigned int count)			\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		__mem_out##bwlq(*__addr, port);				\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void ins##bwlq(unsigned long port, void *addr,		\
+			     unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __mem_in##bwlq(port);				\
+		__addr++;						\
+	}								\
+}
+
+#define BUILDSTRING(bwlq, type)						\
+									\
+__BUILD_MEMORY_STRING(bwlq, type)					\
+__BUILD_IOPORT_STRING(bwlq, type)
+
+BUILDSTRING(b, u8)
+BUILDSTRING(w, u16)
+BUILDSTRING(l, u32)
+#ifdef CONFIG_64BIT
+BUILDSTRING(q, u64)
+#endif
+
+
+/* Depends on MIPS II instruction set */
+#define mmiowb() asm volatile ("sync" ::: "memory")
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+	memset((void __force *) addr, val, count);
+}
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+	memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+	memcpy((void __force *) dst, src, count);
+}
+
+/*
+ * The caches on some architectures aren't dma-coherent and have need to
+ * handle this in software.  There are three types of operations that
+ * can be applied to dma buffers.
+ *
+ *  - dma_cache_wback_inv(start, size) makes caches and coherent by
+ *    writing the content of the caches back to memory, if necessary.
+ *    The function also invalidates the affected part of the caches as
+ *    necessary before DMA transfers from outside to memory.
+ *  - dma_cache_wback(start, size) makes caches and coherent by
+ *    writing the content of the caches back to memory, if necessary.
+ *    The function also invalidates the affected part of the caches as
+ *    necessary before DMA transfers from outside to memory.
+ *  - dma_cache_inv(start, size) invalidates the affected parts of the
+ *    caches.  Dirty lines of the caches may be written back or simply
+ *    be discarded.  This operation is necessary before dma operations
+ *    to the memory.
+ *
+ * This API used to be exported; it now is for arch code internal use only.
+ */
+#ifdef CONFIG_DMA_NONCOHERENT
+
+extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
+extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
+extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+
+#define dma_cache_wback_inv(start, size)	_dma_cache_wback_inv(start, size)
+#define dma_cache_wback(start, size)		_dma_cache_wback(start, size)
+#define dma_cache_inv(start, size)		_dma_cache_inv(start, size)
+
+#else /* Sane hardware */
+
+#define dma_cache_wback_inv(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+#define dma_cache_wback(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+#define dma_cache_inv(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+
+#endif /* CONFIG_DMA_NONCOHERENT */
+
+/*
+ * Read a 32-bit register that requires a 64-bit read cycle on the bus.
+ * Avoid interrupt mucking, just adjust the address for 4-byte access.
+ * Assume the addresses are 8-byte aligned.
+ */
+#ifdef __MIPSEB__
+#define __CSR_32_ADJUST 4
+#else
+#define __CSR_32_ADJUST 0
+#endif
+
+#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
+#define csr_in32(a)    (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* _ASM_IO_H */
diff --git a/arch/mips/include/asm/ioctl.h b/arch/mips/include/asm/ioctl.h
new file mode 100644
index 0000000..85067e2
--- /dev/null
+++ b/arch/mips/include/asm/ioctl.h
@@ -0,0 +1,94 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 99, 2001 Ralf Baechle
+ */
+#ifndef _ASM_IOCTL_H
+#define _ASM_IOCTL_H
+
+/*
+ * The original linux ioctl numbering scheme was just a general
+ * "anything goes" setup, where more or less random numbers were
+ * assigned.  Sorry, I was clueless when I started out on this.
+ *
+ * On the alpha, we'll try to clean it up a bit, using a more sane
+ * ioctl numbering, and also trying to be compatible with OSF/1 in
+ * the process. I'd like to clean it up for the i386 as well, but
+ * it's so painful recognizing both the new and the old numbers..
+ *
+ * The same applies for for the MIPS ABI; in fact even the macros
+ * from Linux/Alpha fit almost perfectly.
+ */
+
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	13
+#define _IOC_DIRBITS	3
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
+ * And this turns out useful to catch old ioctl numbers in header
+ * files for us.
+ */
+#define _IOC_NONE	1U
+#define _IOC_READ	2U
+#define _IOC_WRITE	4U
+
+/*
+ * The following are included for compatibility
+ */
+#define _IOC_VOID	0x20000000
+#define _IOC_OUT	0x40000000
+#define _IOC_IN		0x80000000
+#define _IOC_INOUT	(IOC_IN|IOC_OUT)
+
+#define _IOC(dir, type, nr, size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+	((sizeof(t) == sizeof(t[1]) && \
+	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+	  sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type, nr)		_IOC(_IOC_NONE, (type), (nr), 0)
+#define _IOR(type, nr, size)	_IOC(_IOC_READ, (type), (nr), (_IOC_TYPECHECK(size)))
+#define _IOW(type, nr, size)	_IOC(_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size)))
+#define _IOWR(type, nr, size)	_IOC(_IOC_READ|_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type, nr, size)	_IOC(_IOC_READ, (type), (nr), sizeof(size))
+#define _IOW_BAD(type, nr, size)	_IOC(_IOC_WRITE, (type), (nr), sizeof(size))
+#define _IOWR_BAD(type, nr, size)	_IOC(_IOC_READ|_IOC_WRITE, (type), (nr), sizeof(size))
+
+
+/* used to decode them.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASM_IOCTL_H */
diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h
new file mode 100644
index 0000000..3f04a99
--- /dev/null
+++ b/arch/mips/include/asm/ioctls.h
@@ -0,0 +1,109 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2001 Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef __ASM_IOCTLS_H
+#define __ASM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define TCGETA		0x5401
+#define TCSETA		0x5402	/* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETAW		0x5403
+#define TCSETAF		0x5404
+
+#define TCSBRK		0x5405
+#define TCXONC		0x5406
+#define TCFLSH		0x5407
+
+#define TCGETS		0x540d
+#define TCSETS		0x540e
+#define TCSETSW		0x540f
+#define TCSETSF		0x5410
+
+#define TIOCEXCL	0x740d		/* set exclusive use of tty */
+#define TIOCNXCL	0x740e		/* reset exclusive use of tty */
+#define TIOCOUTQ	0x7472		/* output queue size */
+#define TIOCSTI		0x5472		/* simulate terminal input */
+#define TIOCMGET	0x741d		/* get all modem bits */
+#define TIOCMBIS	0x741b		/* bis modem bits */
+#define TIOCMBIC	0x741c		/* bic modem bits */
+#define TIOCMSET	0x741a		/* set all modem bits */
+#define TIOCPKT		0x5470		/* pty: set/clear packet mode */
+#define	 TIOCPKT_DATA		0x00	/* data packet */
+#define	 TIOCPKT_FLUSHREAD	0x01	/* flush packet */
+#define	 TIOCPKT_FLUSHWRITE	0x02	/* flush packet */
+#define	 TIOCPKT_STOP		0x04	/* stop output */
+#define	 TIOCPKT_START		0x08	/* start output */
+#define	 TIOCPKT_NOSTOP		0x10	/* no more ^S, ^Q */
+#define	 TIOCPKT_DOSTOP		0x20	/* now do ^S ^Q */
+/* #define  TIOCPKT_IOCTL		0x40	state change of pty driver */
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)	/* set window size */
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)	/* get window size */
+#define TIOCNOTTY	0x5471		/* void tty association */
+#define TIOCSETD	0x7401
+#define TIOCGETD	0x7400
+
+#define FIOCLEX		0x6601
+#define FIONCLEX	0x6602
+#define FIOASYNC	0x667d
+#define FIONBIO		0x667e
+#define FIOQSIZE	0x667f
+
+#define TIOCGLTC	0x7474			/* get special local chars */
+#define TIOCSLTC	0x7475			/* set special local chars */
+#define TIOCSPGRP	_IOW('t', 118, int)	/* set pgrp of tty */
+#define TIOCGPGRP	_IOR('t', 119, int)	/* get pgrp of tty */
+#define TIOCCONS	_IOW('t', 120, int)	/* become virtual console */
+
+#define FIONREAD	0x467f
+#define TIOCINQ		FIONREAD
+
+#define TIOCGETP        0x7408
+#define TIOCSETP        0x7409
+#define TIOCSETN        0x740a			/* TIOCSETP wo flush */
+
+/* #define TIOCSETA	_IOW('t', 20, struct termios) set termios struct */
+/* #define TIOCSETAW	_IOW('t', 21, struct termios) drain output, set */
+/* #define TIOCSETAF	_IOW('t', 22, struct termios) drn out, fls in, set */
+/* #define TIOCGETD	_IOR('t', 26, int)	get line discipline */
+/* #define TIOCSETD	_IOW('t', 27, int)	set line discipline */
+						/* 127-124 compat */
+
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x7416  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 0x2A, struct termios2)
+#define TCSETS2		_IOW('T', 0x2B, struct termios2)
+#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
+#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+
+/* I hope the range from 0x5480 on is free ... */
+#define TIOCSCTTY	0x5480		/* become controlling tty */
+#define TIOCGSOFTCAR	0x5481
+#define TIOCSSOFTCAR	0x5482
+#define TIOCLINUX	0x5483
+#define TIOCGSERIAL	0x5484
+#define TIOCSSERIAL	0x5485
+#define TCSBRKP		0x5486	/* Needed for POSIX tcsendbreak() */
+#define TIOCSERCONFIG	0x5488
+#define TIOCSERGWILD	0x5489
+#define TIOCSERSWILD	0x548a
+#define TIOCGLCKTRMIOS	0x548b
+#define TIOCSLCKTRMIOS	0x548c
+#define TIOCSERGSTRUCT	0x548d /* For debugging only */
+#define TIOCSERGETLSR   0x548e /* Get line status register */
+#define TIOCSERGETMULTI 0x548f /* Get multiport config  */
+#define TIOCSERSETMULTI 0x5490 /* Set multiport config */
+#define TIOCMIWAIT      0x5491 /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT     0x5492 /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP	0x5493 /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP	0x5494 /* Set Hayes ESP configuration */
+
+#endif /* __ASM_IOCTLS_H */
diff --git a/arch/mips/include/asm/ip32/crime.h b/arch/mips/include/asm/ip32/crime.h
new file mode 100644
index 0000000..7c36b0e
--- /dev/null
+++ b/arch/mips/include/asm/ip32/crime.h
@@ -0,0 +1,158 @@
+/*
+ * Definitions for the SGI CRIME (CPU, Rendering, Interconnect and Memory
+ * Engine)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_CRIME_H__
+#define __ASM_CRIME_H__
+
+/*
+ * Address map
+ */
+#define CRIME_BASE	0x14000000	/* physical */
+
+struct sgi_crime {
+	volatile unsigned long id;
+#define CRIME_ID_MASK			0xff
+#define CRIME_ID_IDBITS			0xf0
+#define CRIME_ID_IDVALUE		0xa0
+#define CRIME_ID_REV			0x0f
+#define CRIME_REV_PETTY			0x00
+#define CRIME_REV_11			0x11
+#define CRIME_REV_13			0x13
+#define CRIME_REV_14			0x14
+
+	volatile unsigned long control;
+#define CRIME_CONTROL_MASK		0x3fff
+#define CRIME_CONTROL_TRITON_SYSADC	0x2000
+#define CRIME_CONTROL_CRIME_SYSADC	0x1000
+#define CRIME_CONTROL_HARD_RESET	0x0800
+#define CRIME_CONTROL_SOFT_RESET	0x0400
+#define CRIME_CONTROL_DOG_ENA		0x0200
+#define CRIME_CONTROL_ENDIANESS		0x0100
+#define CRIME_CONTROL_ENDIAN_BIG	0x0100
+#define CRIME_CONTROL_ENDIAN_LITTLE	0x0000
+#define CRIME_CONTROL_CQUEUE_HWM	0x000f
+#define CRIME_CONTROL_CQUEUE_SHFT	0
+#define CRIME_CONTROL_WBUF_HWM		0x00f0
+#define CRIME_CONTROL_WBUF_SHFT		8
+
+	volatile unsigned long istat;
+	volatile unsigned long imask;
+	volatile unsigned long soft_int;
+	volatile unsigned long hard_int;
+#define MACE_VID_IN1_INT		BIT(0)
+#define MACE_VID_IN2_INT		BIT(1)
+#define MACE_VID_OUT_INT		BIT(2)
+#define MACE_ETHERNET_INT		BIT(3)
+#define MACE_SUPERIO_INT		BIT(4)
+#define MACE_MISC_INT			BIT(5)
+#define MACE_AUDIO_INT			BIT(6)
+#define MACE_PCI_BRIDGE_INT		BIT(7)
+#define MACEPCI_SCSI0_INT		BIT(8)
+#define MACEPCI_SCSI1_INT		BIT(9)
+#define MACEPCI_SLOT0_INT		BIT(10)
+#define MACEPCI_SLOT1_INT		BIT(11)
+#define MACEPCI_SLOT2_INT		BIT(12)
+#define MACEPCI_SHARED0_INT		BIT(13)
+#define MACEPCI_SHARED1_INT		BIT(14)
+#define MACEPCI_SHARED2_INT		BIT(15)
+#define CRIME_GBE0_INT			BIT(16)
+#define CRIME_GBE1_INT			BIT(17)
+#define CRIME_GBE2_INT			BIT(18)
+#define CRIME_GBE3_INT			BIT(19)
+#define CRIME_CPUERR_INT		BIT(20)
+#define CRIME_MEMERR_INT		BIT(21)
+#define CRIME_RE_EMPTY_E_INT		BIT(22)
+#define CRIME_RE_FULL_E_INT		BIT(23)
+#define CRIME_RE_IDLE_E_INT		BIT(24)
+#define CRIME_RE_EMPTY_L_INT		BIT(25)
+#define CRIME_RE_FULL_L_INT		BIT(26)
+#define CRIME_RE_IDLE_L_INT    		BIT(27)
+#define CRIME_SOFT0_INT			BIT(28)
+#define CRIME_SOFT1_INT			BIT(29)
+#define CRIME_SOFT2_INT			BIT(30)
+#define CRIME_SYSCORERR_INT		CRIME_SOFT2_INT
+#define CRIME_VICE_INT			BIT(31)
+/* Masks for deciding who handles the interrupt */
+#define CRIME_MACE_INT_MASK		0x8f
+#define CRIME_MACEISA_INT_MASK		0x70
+#define CRIME_MACEPCI_INT_MASK		0xff00
+#define CRIME_CRIME_INT_MASK		0xffff0000
+
+	volatile unsigned long watchdog;
+#define CRIME_DOG_POWER_ON_RESET	0x00010000
+#define CRIME_DOG_WARM_RESET		0x00080000
+#define CRIME_DOG_TIMEOUT		(CRIME_DOG_POWER_ON_RESET|CRIME_DOG_WARM_RESET)
+#define CRIME_DOG_VALUE			0x00007fff
+
+	volatile unsigned long timer;
+#define CRIME_MASTER_FREQ		66666500	/* Crime upcounter frequency */
+#define CRIME_NS_PER_TICK		15		/* for delay_calibrate */
+
+	volatile unsigned long cpu_error_addr;
+#define CRIME_CPU_ERROR_ADDR_MASK	0x3ffffffff
+
+	volatile unsigned long cpu_error_stat;
+#define CRIME_CPU_ERROR_MASK		0x7		/* cpu error stat is 3 bits */
+#define CRIME_CPU_ERROR_CPU_ILL_ADDR	0x4
+#define CRIME_CPU_ERROR_VICE_WRT_PRTY	0x2
+#define CRIME_CPU_ERROR_CPU_WRT_PRTY	0x1
+
+	unsigned long _pad0[54];
+
+	volatile unsigned long mc_ctrl;
+	volatile unsigned long bank_ctrl[8];
+#define CRIME_MEM_BANK_CONTROL_MASK		0x11f	/* 9 bits 7:5 reserved */
+#define CRIME_MEM_BANK_CONTROL_ADDR		0x01f
+#define CRIME_MEM_BANK_CONTROL_SDRAM_SIZE	0x100
+#define CRIME_MAXBANKS				8
+
+	volatile unsigned long mem_ref_counter;
+#define CRIME_MEM_REF_COUNTER_MASK	0x3ff		/* 10bit */
+
+	volatile unsigned long mem_error_stat;
+#define CRIME_MEM_ERROR_STAT_MASK       0x0ff7ffff	/* 28-bit register */
+#define CRIME_MEM_ERROR_MACE_ID		0x0000007f
+#define CRIME_MEM_ERROR_MACE_ACCESS	0x00000080
+#define CRIME_MEM_ERROR_RE_ID		0x00007f00
+#define CRIME_MEM_ERROR_RE_ACCESS	0x00008000
+#define CRIME_MEM_ERROR_GBE_ACCESS	0x00010000
+#define CRIME_MEM_ERROR_VICE_ACCESS	0x00020000
+#define CRIME_MEM_ERROR_CPU_ACCESS	0x00040000
+#define CRIME_MEM_ERROR_RESERVED	0x00080000
+#define CRIME_MEM_ERROR_SOFT_ERR	0x00100000
+#define CRIME_MEM_ERROR_HARD_ERR	0x00200000
+#define CRIME_MEM_ERROR_MULTIPLE	0x00400000
+#define CRIME_MEM_ERROR_ECC		0x01800000
+#define CRIME_MEM_ERROR_MEM_ECC_RD	0x00800000
+#define CRIME_MEM_ERROR_MEM_ECC_RMW	0x01000000
+#define CRIME_MEM_ERROR_INV		0x0e000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD	0x02000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR	0x04000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_RMW 0x08000000
+
+	volatile unsigned long mem_error_addr;
+#define CRIME_MEM_ERROR_ADDR_MASK	0x3fffffff
+
+	volatile unsigned long mem_ecc_syn;
+#define CRIME_MEM_ERROR_ECC_SYN_MASK	0xffffffff
+
+	volatile unsigned long mem_ecc_chk;
+#define CRIME_MEM_ERROR_ECC_CHK_MASK	0xffffffff
+
+	volatile unsigned long mem_ecc_repl;
+#define CRIME_MEM_ERROR_ECC_REPL_MASK	0xffffffff
+};
+
+extern struct sgi_crime __iomem *crime;
+
+#define CRIME_HI_MEM_BASE	0x40000000	/* this is where whole 1G of RAM is mapped */
+
+#endif /* __ASM_CRIME_H__ */
diff --git a/arch/mips/include/asm/ip32/ip32_ints.h b/arch/mips/include/asm/ip32/ip32_ints.h
new file mode 100644
index 0000000..85bc530
--- /dev/null
+++ b/arch/mips/include/asm/ip32/ip32_ints.h
@@ -0,0 +1,114 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_IP32_INTS_H
+#define __ASM_IP32_INTS_H
+
+#include <asm/irq.h>
+
+/*
+ * This list reflects the assignment of interrupt numbers to
+ * interrupting events.  Order is fairly irrelevant to handling
+ * priority.  This differs from irix.
+ */
+
+enum ip32_irq_no {
+	/*
+	 * CPU interrupts are 0 ... 7
+	 */
+
+	CRIME_IRQ_BASE			= MIPS_CPU_IRQ_BASE + 8,
+
+	/*
+	 * MACE
+	 */
+	MACE_VID_IN1_IRQ		= CRIME_IRQ_BASE,
+	MACE_VID_IN2_IRQ,
+	MACE_VID_OUT_IRQ,
+	MACE_ETHERNET_IRQ,
+	/* SUPERIO, MISC, and AUDIO are MACEISA */
+	__MACE_SUPERIO,
+	__MACE_MISC,
+	__MACE_AUDIO,
+	MACE_PCI_BRIDGE_IRQ,
+
+	/*
+	 * MACEPCI
+	 */
+	MACEPCI_SCSI0_IRQ,
+	MACEPCI_SCSI1_IRQ,
+	MACEPCI_SLOT0_IRQ,
+	MACEPCI_SLOT1_IRQ,
+	MACEPCI_SLOT2_IRQ,
+	MACEPCI_SHARED0_IRQ,
+	MACEPCI_SHARED1_IRQ,
+	MACEPCI_SHARED2_IRQ,
+
+	/*
+	 * CRIME
+	 */
+	CRIME_GBE0_IRQ,
+	CRIME_GBE1_IRQ,
+	CRIME_GBE2_IRQ,
+	CRIME_GBE3_IRQ,
+	CRIME_CPUERR_IRQ,
+	CRIME_MEMERR_IRQ,
+	CRIME_RE_EMPTY_E_IRQ,
+	CRIME_RE_FULL_E_IRQ,
+	CRIME_RE_IDLE_E_IRQ,
+	CRIME_RE_EMPTY_L_IRQ,
+	CRIME_RE_FULL_L_IRQ,
+	CRIME_RE_IDLE_L_IRQ,
+	CRIME_SOFT0_IRQ,
+	CRIME_SOFT1_IRQ,
+	CRIME_SOFT2_IRQ,
+	CRIME_SYSCORERR_IRQ		= CRIME_SOFT2_IRQ,
+	CRIME_VICE_IRQ,
+
+	/*
+	 * MACEISA
+	 */
+	MACEISA_AUDIO_SW_IRQ,
+	MACEISA_AUDIO_SC_IRQ,
+	MACEISA_AUDIO1_DMAT_IRQ,
+	MACEISA_AUDIO1_OF_IRQ,
+	MACEISA_AUDIO2_DMAT_IRQ,
+	MACEISA_AUDIO2_MERR_IRQ,
+	MACEISA_AUDIO3_DMAT_IRQ,
+	MACEISA_AUDIO3_MERR_IRQ,
+	MACEISA_RTC_IRQ,
+	MACEISA_KEYB_IRQ,
+	/* MACEISA_KEYB_POLL is not an IRQ */
+	__MACEISA_KEYB_POLL,
+	MACEISA_MOUSE_IRQ,
+	/* MACEISA_MOUSE_POLL is not an IRQ */
+	__MACEISA_MOUSE_POLL,
+	MACEISA_TIMER0_IRQ,
+	MACEISA_TIMER1_IRQ,
+	MACEISA_TIMER2_IRQ,
+	MACEISA_PARALLEL_IRQ,
+	MACEISA_PAR_CTXA_IRQ,
+	MACEISA_PAR_CTXB_IRQ,
+	MACEISA_PAR_MERR_IRQ,
+	MACEISA_SERIAL1_IRQ,
+	MACEISA_SERIAL1_TDMAT_IRQ,
+	MACEISA_SERIAL1_TDMAPR_IRQ,
+	MACEISA_SERIAL1_TDMAME_IRQ,
+	MACEISA_SERIAL1_RDMAT_IRQ,
+	MACEISA_SERIAL1_RDMAOR_IRQ,
+	MACEISA_SERIAL2_IRQ,
+	MACEISA_SERIAL2_TDMAT_IRQ,
+	MACEISA_SERIAL2_TDMAPR_IRQ,
+	MACEISA_SERIAL2_TDMAME_IRQ,
+	MACEISA_SERIAL2_RDMAT_IRQ,
+	MACEISA_SERIAL2_RDMAOR_IRQ,
+
+	IP32_IRQ_MAX			= MACEISA_SERIAL2_RDMAOR_IRQ
+};
+
+#endif /* __ASM_IP32_INTS_H */
diff --git a/arch/mips/include/asm/ip32/mace.h b/arch/mips/include/asm/ip32/mace.h
new file mode 100644
index 0000000..d08d7c6
--- /dev/null
+++ b/arch/mips/include/asm/ip32/mace.h
@@ -0,0 +1,365 @@
+/*
+ * Definitions for the SGI MACE (Multimedia, Audio and Communications Engine)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ * Copyright (C) 2004 Ladislav Michl
+ */
+
+#ifndef __ASM_MACE_H__
+#define __ASM_MACE_H__
+
+/*
+ * Address map
+ */
+#define MACE_BASE	0x1f000000	/* physical */
+
+/*
+ * PCI interface
+ */
+struct mace_pci {
+	volatile unsigned int error_addr;
+	volatile unsigned int error;
+#define MACEPCI_ERROR_MASTER_ABORT		BIT(31)
+#define MACEPCI_ERROR_TARGET_ABORT		BIT(30)
+#define MACEPCI_ERROR_DATA_PARITY_ERR		BIT(29)
+#define MACEPCI_ERROR_RETRY_ERR			BIT(28)
+#define MACEPCI_ERROR_ILLEGAL_CMD		BIT(27)
+#define MACEPCI_ERROR_SYSTEM_ERR		BIT(26)
+#define MACEPCI_ERROR_INTERRUPT_TEST		BIT(25)
+#define MACEPCI_ERROR_PARITY_ERR		BIT(24)
+#define MACEPCI_ERROR_OVERRUN			BIT(23)
+#define MACEPCI_ERROR_RSVD			BIT(22)
+#define MACEPCI_ERROR_MEMORY_ADDR		BIT(21)
+#define MACEPCI_ERROR_CONFIG_ADDR		BIT(20)
+#define MACEPCI_ERROR_MASTER_ABORT_ADDR_VALID	BIT(19)
+#define MACEPCI_ERROR_TARGET_ABORT_ADDR_VALID	BIT(18)
+#define MACEPCI_ERROR_DATA_PARITY_ADDR_VALID	BIT(17)
+#define MACEPCI_ERROR_RETRY_ADDR_VALID		BIT(16)
+#define MACEPCI_ERROR_SIG_TABORT		BIT(4)
+#define MACEPCI_ERROR_DEVSEL_MASK		0xc0
+#define MACEPCI_ERROR_DEVSEL_FAST		0
+#define MACEPCI_ERROR_DEVSEL_MED		0x40
+#define MACEPCI_ERROR_DEVSEL_SLOW		0x80
+#define MACEPCI_ERROR_FBB			BIT(1)
+#define MACEPCI_ERROR_66MHZ			BIT(0)
+	volatile unsigned int control;
+#define MACEPCI_CONTROL_INT(x)			BIT(x)
+#define MACEPCI_CONTROL_INT_MASK		0xff
+#define MACEPCI_CONTROL_SERR_ENA		BIT(8)
+#define MACEPCI_CONTROL_ARB_N6			BIT(9)
+#define MACEPCI_CONTROL_PARITY_ERR		BIT(10)
+#define MACEPCI_CONTROL_MRMRA_ENA		BIT(11)
+#define MACEPCI_CONTROL_ARB_N3			BIT(12)
+#define MACEPCI_CONTROL_ARB_N4			BIT(13)
+#define MACEPCI_CONTROL_ARB_N5			BIT(14)
+#define MACEPCI_CONTROL_PARK_LIU		BIT(15)
+#define MACEPCI_CONTROL_INV_INT(x)		BIT(16+x)
+#define MACEPCI_CONTROL_INV_INT_MASK		0x00ff0000
+#define MACEPCI_CONTROL_OVERRUN_INT		BIT(24)
+#define MACEPCI_CONTROL_PARITY_INT		BIT(25)
+#define MACEPCI_CONTROL_SERR_INT		BIT(26)
+#define MACEPCI_CONTROL_IT_INT			BIT(27)
+#define MACEPCI_CONTROL_RE_INT			BIT(28)
+#define MACEPCI_CONTROL_DPED_INT		BIT(29)
+#define MACEPCI_CONTROL_TAR_INT			BIT(30)
+#define MACEPCI_CONTROL_MAR_INT			BIT(31)
+	volatile unsigned int rev;
+	unsigned int _pad[0xcf8/4 - 4];
+	volatile unsigned int config_addr;
+	union {
+		volatile unsigned char b[4];
+		volatile unsigned short w[2];
+		volatile unsigned int l;
+	} config_data;
+};
+#define MACEPCI_LOW_MEMORY		0x1a000000
+#define MACEPCI_LOW_IO			0x18000000
+#define MACEPCI_SWAPPED_VIEW		0
+#define MACEPCI_NATIVE_VIEW		0x40000000
+#define MACEPCI_IO			0x80000000
+#define MACEPCI_HI_MEMORY		0x280000000
+#define MACEPCI_HI_IO			0x100000000
+
+/*
+ * Video interface
+ */
+struct mace_video {
+	unsigned long xxx;	/* later... */
+};
+
+/*
+ * Ethernet interface
+ */
+struct mace_ethernet {
+	volatile unsigned long mac_ctrl;
+	volatile unsigned long int_stat;
+	volatile unsigned long dma_ctrl;
+	volatile unsigned long timer;
+	volatile unsigned long tx_int_al;
+	volatile unsigned long rx_int_al;
+	volatile unsigned long tx_info;
+	volatile unsigned long tx_info_al;
+	volatile unsigned long rx_buff;
+	volatile unsigned long rx_buff_al1;
+	volatile unsigned long rx_buff_al2;
+	volatile unsigned long diag;
+	volatile unsigned long phy_data;
+	volatile unsigned long phy_regs;
+	volatile unsigned long phy_trans_go;
+	volatile unsigned long backoff_seed;
+	/*===================================*/
+	volatile unsigned long imq_reserved[4];
+	volatile unsigned long mac_addr;
+	volatile unsigned long mac_addr2;
+	volatile unsigned long mcast_filter;
+	volatile unsigned long tx_ring_base;
+	/* Following are read-only registers for debugging */
+	volatile unsigned long tx_pkt1_hdr;
+	volatile unsigned long tx_pkt1_ptr[3];
+	volatile unsigned long tx_pkt2_hdr;
+	volatile unsigned long tx_pkt2_ptr[3];
+	/*===================================*/
+	volatile unsigned long rx_fifo;
+};
+
+/*
+ * Peripherals
+ */
+
+/* Audio registers */
+struct mace_audio {
+	volatile unsigned long control;
+	volatile unsigned long codec_control;		/* codec status control */
+	volatile unsigned long codec_mask;		/* codec status input mask */
+	volatile unsigned long codec_read;		/* codec status read data */
+	struct {
+		volatile unsigned long control;		/* channel control */
+		volatile unsigned long read_ptr;	/* channel read pointer */
+		volatile unsigned long write_ptr;	/* channel write pointer */
+		volatile unsigned long depth;		/* channel depth */
+	} chan[3];
+};
+
+
+/* register definitions for parallel port DMA */
+struct mace_parport {
+	/* 0 - do nothing,
+	 * 1 - pulse terminal count to the device after buffer is drained */
+#define MACEPAR_CONTEXT_LASTFLAG	BIT(63)
+	/* Should not cross 4K page boundary */
+#define MACEPAR_CONTEXT_DATA_BOUND	0x0000000000001000UL
+#define MACEPAR_CONTEXT_DATALEN_MASK	0x00000fff00000000UL
+#define MACEPAR_CONTEXT_DATALEN_SHIFT	32
+	/* Can be arbitrarily aligned on any byte boundary on output,
+	 * 64 byte aligned on input */
+#define MACEPAR_CONTEXT_BASEADDR_MASK	0x00000000ffffffffUL
+	volatile u64 context_a;
+	volatile u64 context_b;
+	/* 0 - mem->device, 1 - device->mem */
+#define MACEPAR_CTLSTAT_DIRECTION	BIT(0)
+	/* 0 - channel frozen, 1 - channel enabled */
+#define MACEPAR_CTLSTAT_ENABLE		BIT(1)
+	/* 0 - channel active, 1 - complete channel reset */
+#define MACEPAR_CTLSTAT_RESET		BIT(2)
+#define MACEPAR_CTLSTAT_CTXB_VALID	BIT(3)
+#define MACEPAR_CTLSTAT_CTXA_VALID	BIT(4)
+	volatile u64 cntlstat;		/* Control/Status register */
+#define MACEPAR_DIAG_CTXINUSE		BIT(0)
+	/* 1 - Dma engine is enabled and processing something */
+#define MACEPAR_DIAG_DMACTIVE		BIT(1)
+	/* Counter of bytes left */
+#define MACEPAR_DIAG_CTRMASK		0x0000000000003ffcUL
+#define MACEPAR_DIAG_CTRSHIFT		2
+	volatile u64 diagnostic;	/* RO: diagnostic register */
+};
+
+/* ISA Control and DMA registers */
+struct mace_isactrl {
+	volatile unsigned long ringbase;
+#define MACEISA_RINGBUFFERS_SIZE	(8 * 4096)
+
+	volatile unsigned long misc;
+#define MACEISA_FLASH_WE		BIT(0)	/* 1=> Enable FLASH writes */
+#define MACEISA_PWD_CLEAR		BIT(1)	/* 1=> PWD CLEAR jumper detected */
+#define MACEISA_NIC_DEASSERT		BIT(2)
+#define MACEISA_NIC_DATA		BIT(3)
+#define MACEISA_LED_RED			BIT(4)	/* 0=> Illuminate red LED */
+#define MACEISA_LED_GREEN		BIT(5)	/* 0=> Illuminate green LED */
+#define MACEISA_DP_RAM_ENABLE		BIT(6)
+
+	volatile unsigned long istat;
+	volatile unsigned long imask;
+#define MACEISA_AUDIO_SW_INT		BIT(0)
+#define MACEISA_AUDIO_SC_INT		BIT(1)
+#define MACEISA_AUDIO1_DMAT_INT		BIT(2)
+#define MACEISA_AUDIO1_OF_INT		BIT(3)
+#define MACEISA_AUDIO2_DMAT_INT		BIT(4)
+#define MACEISA_AUDIO2_MERR_INT		BIT(5)
+#define MACEISA_AUDIO3_DMAT_INT		BIT(6)
+#define MACEISA_AUDIO3_MERR_INT		BIT(7)
+#define MACEISA_RTC_INT			BIT(8)
+#define MACEISA_KEYB_INT		BIT(9)
+#define MACEISA_KEYB_POLL_INT		BIT(10)
+#define MACEISA_MOUSE_INT		BIT(11)
+#define MACEISA_MOUSE_POLL_INT		BIT(12)
+#define MACEISA_TIMER0_INT		BIT(13)
+#define MACEISA_TIMER1_INT		BIT(14)
+#define MACEISA_TIMER2_INT		BIT(15)
+#define MACEISA_PARALLEL_INT		BIT(16)
+#define MACEISA_PAR_CTXA_INT		BIT(17)
+#define MACEISA_PAR_CTXB_INT		BIT(18)
+#define MACEISA_PAR_MERR_INT		BIT(19)
+#define MACEISA_SERIAL1_INT		BIT(20)
+#define MACEISA_SERIAL1_TDMAT_INT	BIT(21)
+#define MACEISA_SERIAL1_TDMAPR_INT	BIT(22)
+#define MACEISA_SERIAL1_TDMAME_INT	BIT(23)
+#define MACEISA_SERIAL1_RDMAT_INT	BIT(24)
+#define MACEISA_SERIAL1_RDMAOR_INT	BIT(25)
+#define MACEISA_SERIAL2_INT		BIT(26)
+#define MACEISA_SERIAL2_TDMAT_INT	BIT(27)
+#define MACEISA_SERIAL2_TDMAPR_INT	BIT(28)
+#define MACEISA_SERIAL2_TDMAME_INT	BIT(29)
+#define MACEISA_SERIAL2_RDMAT_INT	BIT(30)
+#define MACEISA_SERIAL2_RDMAOR_INT	BIT(31)
+
+	volatile unsigned long _pad[0x2000/8 - 4];
+
+	volatile unsigned long dp_ram[0x400];
+	struct mace_parport parport;
+};
+
+/* Keyboard & Mouse registers
+ * -> drivers/input/serio/maceps2.c */
+struct mace_ps2port {
+	volatile unsigned long tx;
+	volatile unsigned long rx;
+	volatile unsigned long control;
+	volatile unsigned long status;
+};
+
+struct mace_ps2 {
+	struct mace_ps2port keyb;
+	struct mace_ps2port mouse;
+};
+
+/* I2C registers
+ * -> drivers/i2c/algos/i2c-algo-sgi.c */
+struct mace_i2c {
+	volatile unsigned long config;
+#define MACEI2C_RESET           BIT(0)
+#define MACEI2C_FAST            BIT(1)
+#define MACEI2C_DATA_OVERRIDE   BIT(2)
+#define MACEI2C_CLOCK_OVERRIDE  BIT(3)
+#define MACEI2C_DATA_STATUS     BIT(4)
+#define MACEI2C_CLOCK_STATUS    BIT(5)
+	volatile unsigned long control;
+	volatile unsigned long data;
+};
+
+/* Timer registers */
+typedef union {
+	volatile unsigned long ust_msc;
+	struct reg {
+		volatile unsigned int ust;
+		volatile unsigned int msc;
+	} reg;
+} timer_reg;
+
+struct mace_timers {
+	volatile unsigned long ust;
+#define MACE_UST_PERIOD_NS	960
+
+	volatile unsigned long compare1;
+	volatile unsigned long compare2;
+	volatile unsigned long compare3;
+
+	timer_reg audio_in;
+	timer_reg audio_out1;
+	timer_reg audio_out2;
+	timer_reg video_in1;
+	timer_reg video_in2;
+	timer_reg video_out;
+};
+
+struct mace_perif {
+	struct mace_audio audio;
+	char _pad0[0x10000 - sizeof(struct mace_audio)];
+
+	struct mace_isactrl ctrl;
+	char _pad1[0x10000 - sizeof(struct mace_isactrl)];
+
+	struct mace_ps2 ps2;
+	char _pad2[0x10000 - sizeof(struct mace_ps2)];
+
+	struct mace_i2c i2c;
+	char _pad3[0x10000 - sizeof(struct mace_i2c)];
+
+	struct mace_timers timers;
+	char _pad4[0x10000 - sizeof(struct mace_timers)];
+};
+
+
+/*
+ * ISA peripherals
+ */
+
+/* Parallel port */
+struct mace_parallel {
+};
+
+struct mace_ecp1284 {	/* later... */
+};
+
+/* Serial port */
+struct mace_serial {
+	volatile unsigned long xxx;	/* later... */
+};
+
+struct mace_isa {
+	struct mace_parallel parallel;
+	char _pad1[0x8000 - sizeof(struct mace_parallel)];
+
+	struct mace_ecp1284 ecp1284;
+	char _pad2[0x8000 - sizeof(struct mace_ecp1284)];
+
+	struct mace_serial serial1;
+	char _pad3[0x8000 - sizeof(struct mace_serial)];
+
+	struct mace_serial serial2;
+	char _pad4[0x8000 - sizeof(struct mace_serial)];
+
+	volatile unsigned char rtc[0x10000];
+};
+
+struct sgi_mace {
+	char _reserved[0x80000];
+
+	struct mace_pci pci;
+	char _pad0[0x80000 - sizeof(struct mace_pci)];
+
+	struct mace_video video_in1;
+	char _pad1[0x80000 - sizeof(struct mace_video)];
+
+	struct mace_video video_in2;
+	char _pad2[0x80000 - sizeof(struct mace_video)];
+
+	struct mace_video video_out;
+	char _pad3[0x80000 - sizeof(struct mace_video)];
+
+	struct mace_ethernet eth;
+	char _pad4[0x80000 - sizeof(struct mace_ethernet)];
+
+	struct mace_perif perif;
+	char _pad5[0x80000 - sizeof(struct mace_perif)];
+
+	struct mace_isa isa;
+	char _pad6[0x80000 - sizeof(struct mace_isa)];
+};
+
+extern struct sgi_mace __iomem *mace;
+
+#endif /* __ASM_MACE_H__ */
diff --git a/arch/mips/include/asm/ipcbuf.h b/arch/mips/include/asm/ipcbuf.h
new file mode 100644
index 0000000..d47d08f
--- /dev/null
+++ b/arch/mips/include/asm/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IPCBUF_H
+#define _ASM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned short	seq;
+	unsigned short	__pad1;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IPCBUF_H */
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
new file mode 100644
index 0000000..a58f0ee
--- /dev/null
+++ b/arch/mips/include/asm/irq.h
@@ -0,0 +1,163 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <linux/linkage.h>
+
+#include <asm/mipsmtregs.h>
+
+#include <irq.h>
+
+#ifdef CONFIG_I8259
+static inline int irq_canonicalize(int irq)
+{
+	return ((irq == I8259A_IRQ_BASE + 2) ? I8259A_IRQ_BASE + 9 : irq);
+}
+#else
+#define irq_canonicalize(irq) (irq)	/* Sane hardware, sane code ... */
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+
+struct irqaction;
+
+extern unsigned long irq_hwmask[];
+extern int setup_irq_smtc(unsigned int irq, struct irqaction * new,
+                          unsigned long hwmask);
+
+static inline void smtc_im_ack_irq(unsigned int irq)
+{
+	if (irq_hwmask[irq] & ST0_IM)
+		set_c0_status(irq_hwmask[irq] & ST0_IM);
+}
+
+#else
+
+static inline void smtc_im_ack_irq(unsigned int irq)
+{
+}
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
+#include <linux/cpumask.h>
+
+extern void plat_set_irq_affinity(unsigned int irq, cpumask_t affinity);
+extern void smtc_forward_irq(unsigned int irq);
+
+/*
+ * IRQ affinity hook invoked at the beginning of interrupt dispatch
+ * if option is enabled.
+ *
+ * Up through Linux 2.6.22 (at least) cpumask operations are very
+ * inefficient on MIPS.  Initial prototypes of SMTC IRQ affinity
+ * used a "fast path" per-IRQ-descriptor cache of affinity information
+ * to reduce latency.  As there is a project afoot to optimize the
+ * cpumask implementations, this version is optimistically assuming
+ * that cpumask.h macro overhead is reasonable during interrupt dispatch.
+ */
+#define IRQ_AFFINITY_HOOK(irq)						\
+do {									\
+    if (!cpu_isset(smp_processor_id(), irq_desc[irq].affinity)) {	\
+	smtc_forward_irq(irq);						\
+	irq_exit();							\
+	return;								\
+    }									\
+} while (0)
+
+#else /* Not doing SMTC affinity */
+
+#define IRQ_AFFINITY_HOOK(irq) do { } while (0)
+
+#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
+
+#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
+
+/*
+ * Clear interrupt mask handling "backstop" if irq_hwmask
+ * entry so indicates. This implies that the ack() or end()
+ * functions will take over re-enabling the low-level mask.
+ * Otherwise it will be done on return from exception.
+ */
+#define __DO_IRQ_SMTC_HOOK(irq)						\
+do {									\
+	IRQ_AFFINITY_HOOK(irq);						\
+	if (irq_hwmask[irq] & 0x0000ff00)				\
+		write_c0_tccontext(read_c0_tccontext() &		\
+				   ~(irq_hwmask[irq] & 0x0000ff00));	\
+} while (0)
+
+#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq)				\
+do {									\
+	if (irq_hwmask[irq] & 0x0000ff00)                               \
+		write_c0_tccontext(read_c0_tccontext() &		\
+				   ~(irq_hwmask[irq] & 0x0000ff00));	\
+} while (0)
+
+#else
+
+#define __DO_IRQ_SMTC_HOOK(irq)						\
+do {									\
+	IRQ_AFFINITY_HOOK(irq);						\
+} while (0)
+#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq) do { } while (0)
+
+#endif
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ *
+ * Ideally there should be away to get this into kernel/irq/handle.c to
+ * avoid the overhead of a call for just a tiny function ...
+ */
+#define do_IRQ(irq)							\
+do {									\
+	irq_enter();							\
+	__DO_IRQ_SMTC_HOOK(irq);					\
+	generic_handle_irq(irq);					\
+	irq_exit();							\
+} while (0)
+
+#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
+/*
+ * To avoid inefficient and in some cases pathological re-checking of
+ * IRQ affinity, we have this variant that skips the affinity check.
+ */
+
+
+#define do_IRQ_no_affinity(irq)						\
+do {									\
+	irq_enter();							\
+	__NO_AFFINITY_IRQ_SMTC_HOOK(irq);				\
+	generic_handle_irq(irq);					\
+	irq_exit();							\
+} while (0)
+
+#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
+
+extern void arch_init_irq(void);
+extern void spurious_interrupt(void);
+
+extern int allocate_irqno(void);
+extern void alloc_legacy_irqno(void);
+extern void free_irqno(unsigned int irq);
+
+/*
+ * Before R2 the timer and performance counter interrupts were both fixed to
+ * IE7.  Since R2 their number has to be read from the c0_intctl register.
+ */
+#define CP0_LEGACY_COMPARE_IRQ 7
+
+extern int cp0_compare_irq;
+extern int cp0_perfcount_irq;
+
+#endif /* _ASM_IRQ_H */
diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h
new file mode 100644
index 0000000..ef6a07c
--- /dev/null
+++ b/arch/mips/include/asm/irq_cpu.h
@@ -0,0 +1,20 @@
+/*
+ *	include/asm-mips/irq_cpu.h
+ *
+ *	MIPS CPU interrupt definitions.
+ *
+ *	Copyright (C) 2002  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_CPU_H
+#define _ASM_IRQ_CPU_H
+
+extern void mips_cpu_irq_init(void);
+extern void rm7k_cpu_irq_init(void);
+extern void rm9k_cpu_irq_init(void);
+
+#endif /* _ASM_IRQ_CPU_H */
diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h
new file mode 100644
index 0000000..f9a7c3a
--- /dev/null
+++ b/arch/mips/include/asm/irq_gt641xx.h
@@ -0,0 +1,60 @@
+/*
+ *  Galileo/Marvell GT641xx IRQ definitions.
+ *
+ *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef _ASM_IRQ_GT641XX_H
+#define _ASM_IRQ_GT641XX_H
+
+#ifndef GT641XX_IRQ_BASE
+#define GT641XX_IRQ_BASE		8
+#endif
+
+#define GT641XX_MEMORY_OUT_OF_RANGE_IRQ		(GT641XX_IRQ_BASE + 1)
+#define GT641XX_DMA_OUT_OF_RANGE_IRQ		(GT641XX_IRQ_BASE + 2)
+#define GT641XX_CPU_ACCESS_OUT_OF_RANGE_IRQ	(GT641XX_IRQ_BASE + 3)
+#define GT641XX_DMA0_IRQ			(GT641XX_IRQ_BASE + 4)
+#define GT641XX_DMA1_IRQ			(GT641XX_IRQ_BASE + 5)
+#define GT641XX_DMA2_IRQ			(GT641XX_IRQ_BASE + 6)
+#define GT641XX_DMA3_IRQ			(GT641XX_IRQ_BASE + 7)
+#define GT641XX_TIMER0_IRQ			(GT641XX_IRQ_BASE + 8)
+#define GT641XX_TIMER1_IRQ			(GT641XX_IRQ_BASE + 9)
+#define GT641XX_TIMER2_IRQ			(GT641XX_IRQ_BASE + 10)
+#define GT641XX_TIMER3_IRQ			(GT641XX_IRQ_BASE + 11)
+#define GT641XX_PCI_0_MASTER_READ_ERROR_IRQ	(GT641XX_IRQ_BASE + 12)
+#define GT641XX_PCI_0_SLAVE_WRITE_ERROR_IRQ	(GT641XX_IRQ_BASE + 13)
+#define GT641XX_PCI_0_MASTER_WRITE_ERROR_IRQ	(GT641XX_IRQ_BASE + 14)
+#define GT641XX_PCI_0_SLAVE_READ_ERROR_IRQ	(GT641XX_IRQ_BASE + 15)
+#define GT641XX_PCI_0_ADDRESS_ERROR_IRQ		(GT641XX_IRQ_BASE + 16)
+#define GT641XX_MEMORY_ERROR_IRQ		(GT641XX_IRQ_BASE + 17)
+#define GT641XX_PCI_0_MASTER_ABORT_IRQ		(GT641XX_IRQ_BASE + 18)
+#define GT641XX_PCI_0_TARGET_ABORT_IRQ		(GT641XX_IRQ_BASE + 19)
+#define GT641XX_PCI_0_RETRY_TIMEOUT_IRQ		(GT641XX_IRQ_BASE + 20)
+#define GT641XX_CPU_INT0_IRQ			(GT641XX_IRQ_BASE + 21)
+#define GT641XX_CPU_INT1_IRQ			(GT641XX_IRQ_BASE + 22)
+#define GT641XX_CPU_INT2_IRQ			(GT641XX_IRQ_BASE + 23)
+#define GT641XX_CPU_INT3_IRQ			(GT641XX_IRQ_BASE + 24)
+#define GT641XX_CPU_INT4_IRQ			(GT641XX_IRQ_BASE + 25)
+#define GT641XX_PCI_INT0_IRQ			(GT641XX_IRQ_BASE + 26)
+#define GT641XX_PCI_INT1_IRQ			(GT641XX_IRQ_BASE + 27)
+#define GT641XX_PCI_INT2_IRQ			(GT641XX_IRQ_BASE + 28)
+#define GT641XX_PCI_INT3_IRQ			(GT641XX_IRQ_BASE + 29)
+
+extern void gt641xx_irq_dispatch(void);
+extern void gt641xx_irq_init(void);
+
+#endif /* _ASM_IRQ_GT641XX_H */
diff --git a/arch/mips/include/asm/irq_regs.h b/arch/mips/include/asm/irq_regs.h
new file mode 100644
index 0000000..33bd2a0
--- /dev/null
+++ b/arch/mips/include/asm/irq_regs.h
@@ -0,0 +1,21 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_IRQ_REGS_H
+#define __ASM_IRQ_REGS_H
+
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#include <linux/thread_info.h>
+
+static inline struct pt_regs *get_irq_regs(void)
+{
+	return current_thread_info()->regs;
+}
+
+#endif /* __ASM_IRQ_REGS_H */
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
new file mode 100644
index 0000000..701ec0b
--- /dev/null
+++ b/arch/mips/include/asm/irqflags.h
@@ -0,0 +1,283 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <asm/hazards.h>
+
+__asm__(
+	"	.macro	raw_local_irq_enable				\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
+	"	ori	$1, 0x400					\n"
+	"	xori	$1, 0x400					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	"	ei							\n"
+#else
+	"	mfc0	$1,$12						\n"
+	"	ori	$1,0x1f						\n"
+	"	xori	$1,0x1e						\n"
+	"	mtc0	$1,$12						\n"
+#endif
+	"	irq_enable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm");
+
+extern void smtc_ipi_replay(void);
+
+static inline void raw_local_irq_enable(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC kernel needs to do a software replay of queued
+	 * IPIs, at the cost of call overhead on each local_irq_enable()
+	 */
+	smtc_ipi_replay();
+#endif
+	__asm__ __volatile__(
+		"raw_local_irq_enable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+__asm__(
+	"	.macro	raw_local_irq_disable\n"
+	"	.set	push						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1					\n"
+	"	ori	$1, 0x400					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	"	di							\n"
+#else
+	"	mfc0	$1,$12						\n"
+	"	ori	$1,0x1f						\n"
+	"	xori	$1,0x1f						\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1,$12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+static inline void raw_local_irq_disable(void)
+{
+	__asm__ __volatile__(
+		"raw_local_irq_disable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+__asm__(
+	"	.macro	raw_local_save_flags flags			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\flags, $2, 1					\n"
+#else
+	"	mfc0	\\flags, $12					\n"
+#endif
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+#define raw_local_save_flags(x)						\
+__asm__ __volatile__(							\
+	"raw_local_save_flags %0"					\
+	: "=r" (x))
+
+__asm__(
+	"	.macro	raw_local_irq_save result			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\result, $2, 1					\n"
+	"	ori	$1, \\result, 0x400				\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+	"	andi	\\result, \\result, 0x400			\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	"	di	\\result					\n"
+	"	andi	\\result, 1					\n"
+#else
+	"	mfc0	\\result, $12					\n"
+	"	ori	$1, \\result, 0x1f				\n"
+	"	xori	$1, 0x1f					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+#define raw_local_irq_save(x)						\
+__asm__ __volatile__(							\
+	"raw_local_irq_save\t%0"					\
+	: "=r" (x)							\
+	: /* no inputs */						\
+	: "memory")
+
+__asm__(
+	"	.macro	raw_local_irq_restore flags			\n"
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"mfc0	$1, $2, 1						\n"
+	"andi	\\flags, 0x400						\n"
+	"ori	$1, 0x400						\n"
+	"xori	$1, 0x400						\n"
+	"or	\\flags, $1						\n"
+	"mtc0	\\flags, $2, 1						\n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+	/*
+	 * Slow, but doesn't suffer from a relativly unlikely race
+	 * condition we're having since days 1.
+	 */
+	"	beqz	\\flags, 1f					\n"
+	"	 di							\n"
+	"	ei							\n"
+	"1:								\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	/*
+	 * Fast, dangerous.  Life is fun, life is good.
+	 */
+	"	mfc0	$1, $12						\n"
+	"	ins	$1, \\flags, 0, 1				\n"
+	"	mtc0	$1, $12						\n"
+#else
+	"	mfc0	$1, $12						\n"
+	"	andi	\\flags, 1					\n"
+	"	ori	$1, 0x1f					\n"
+	"	xori	$1, 0x1f					\n"
+	"	or	\\flags, $1					\n"
+	"	mtc0	\\flags, $12					\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC kernel needs to do a software replay of queued
+	 * IPIs, at the cost of branch and call overhead on each
+	 * local_irq_restore()
+	 */
+	if (unlikely(!(flags & 0x0400)))
+		smtc_ipi_replay();
+#endif
+
+	__asm__ __volatile__(
+		"raw_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+
+static inline void __raw_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	__asm__ __volatile__(
+		"raw_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
+	 */
+	return flags & 0x400;
+#else
+	return !(flags & 1);
+#endif
+}
+
+#endif
+
+/*
+ * Do the CPU's IRQ-state tracing from assembly code.
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+/* Reload some registers clobbered by trace_hardirqs_on */
+#ifdef CONFIG_64BIT
+# define TRACE_IRQS_RELOAD_REGS						\
+	LONG_L	$11, PT_R11(sp);					\
+	LONG_L	$10, PT_R10(sp);					\
+	LONG_L	$9, PT_R9(sp);						\
+	LONG_L	$8, PT_R8(sp);						\
+	LONG_L	$7, PT_R7(sp);						\
+	LONG_L	$6, PT_R6(sp);						\
+	LONG_L	$5, PT_R5(sp);						\
+	LONG_L	$4, PT_R4(sp);						\
+	LONG_L	$2, PT_R2(sp)
+#else
+# define TRACE_IRQS_RELOAD_REGS						\
+	LONG_L	$7, PT_R7(sp);						\
+	LONG_L	$6, PT_R6(sp);						\
+	LONG_L	$5, PT_R5(sp);						\
+	LONG_L	$4, PT_R4(sp);						\
+	LONG_L	$2, PT_R2(sp)
+#endif
+# define TRACE_IRQS_ON							\
+	CLI;	/* make sure trace_hardirqs_on() is called in kernel level */ \
+	jal	trace_hardirqs_on
+# define TRACE_IRQS_ON_RELOAD						\
+	TRACE_IRQS_ON;							\
+	TRACE_IRQS_RELOAD_REGS
+# define TRACE_IRQS_OFF							\
+	jal	trace_hardirqs_off
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_ON_RELOAD
+# define TRACE_IRQS_OFF
+#endif
+
+#endif /* _ASM_IRQFLAGS_H */
diff --git a/arch/mips/include/asm/isadep.h b/arch/mips/include/asm/isadep.h
new file mode 100644
index 0000000..24c6cda
--- /dev/null
+++ b/arch/mips/include/asm/isadep.h
@@ -0,0 +1,34 @@
+/*
+ * Various ISA level dependent constants.
+ * Most of the following constants reflect the different layout
+ * of Coprocessor 0 registers.
+ *
+ * Copyright (c) 1998 Harald Koerfgen
+ */
+
+#ifndef __ASM_ISADEP_H
+#define __ASM_ISADEP_H
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+/*
+ * R2000 or R3000
+ */
+
+/*
+ * kernel or user mode? (CP0_STATUS)
+ */
+#define KU_MASK 0x08
+#define	KU_USER 0x08
+#define KU_KERN 0x00
+
+#else
+/*
+ * kernel or user mode?
+ */
+#define KU_MASK 0x18
+#define	KU_USER 0x10
+#define KU_KERN 0x00
+
+#endif
+
+#endif /* __ASM_ISADEP_H */
diff --git a/arch/mips/include/asm/jazz.h b/arch/mips/include/asm/jazz.h
new file mode 100644
index 0000000..83f449d
--- /dev/null
+++ b/arch/mips/include/asm/jazz.h
@@ -0,0 +1,310 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle
+ */
+#ifndef __ASM_JAZZ_H
+#define __ASM_JAZZ_H
+
+/*
+ * The addresses below are virtual address. The mappings are
+ * created on startup via wired entries in the tlb. The Mips
+ * Magnum R3000 and R4000 machines are similar in many aspects,
+ * but many hardware register are accessible at 0xb9000000 in
+ * instead of 0xe0000000.
+ */
+
+#define JAZZ_LOCAL_IO_SPACE     0xe0000000
+
+/*
+ * Revision numbers in PICA_ASIC_REVISION
+ *
+ * 0xf0000000 - Rev1
+ * 0xf0000001 - Rev2
+ * 0xf0000002 - Rev3
+ */
+#define PICA_ASIC_REVISION      0xe0000008
+
+/*
+ * The segments of the seven segment LED are mapped
+ * to the control bits as follows:
+ *
+ *         (7)
+ *      ---------
+ *      |       |
+ *  (2) |       | (6)
+ *      |  (1)  |
+ *      ---------
+ *      |       |
+ *  (3) |       | (5)
+ *      |  (4)  |
+ *      --------- . (0)
+ */
+#define PICA_LED                0xe000f000
+
+/*
+ * Some characters for the LED control registers
+ * The original Mips machines seem to have a LED display
+ * with integrated decoder while the Acer machines can
+ * control each of the seven segments and the dot independently.
+ * It's only a toy, anyway...
+ */
+#define LED_DOT                 0x01
+#define LED_SPACE               0x00
+#define LED_0                   0xfc
+#define LED_1                   0x60
+#define LED_2                   0xda
+#define LED_3                   0xf2
+#define LED_4                   0x66
+#define LED_5                   0xb6
+#define LED_6                   0xbe
+#define LED_7                   0xe0
+#define LED_8                   0xfe
+#define LED_9                   0xf6
+#define LED_A                   0xee
+#define LED_b                   0x3e
+#define LED_C                   0x9c
+#define LED_d                   0x7a
+#define LED_E                   0x9e
+#define LED_F                   0x8e
+
+#ifndef __ASSEMBLY__
+
+static __inline__ void pica_set_led(unsigned int bits)
+{
+	volatile unsigned int *led_register = (unsigned int *) PICA_LED;
+
+	*led_register = bits;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Base address of the Sonic Ethernet adapter in Jazz machines.
+ */
+#define JAZZ_ETHERNET_BASE  0xe0001000
+
+/*
+ * Base address of the 53C94 SCSI hostadapter in Jazz machines.
+ */
+#define JAZZ_SCSI_BASE		0xe0002000
+
+/*
+ * i8042 keyboard controller for JAZZ and PICA chipsets.
+ * This address is just a guess and seems to differ from
+ * other mips machines such as RC3xxx...
+ */
+#define JAZZ_KEYBOARD_ADDRESS   0xe0005000
+#define JAZZ_KEYBOARD_DATA      0xe0005000
+#define JAZZ_KEYBOARD_COMMAND   0xe0005001
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned char data;
+	unsigned char command;
+} jazz_keyboard_hardware;
+
+#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS)
+
+typedef struct {
+	unsigned char pad0[3];
+	unsigned char data;
+	unsigned char pad1[3];
+	unsigned char command;
+} mips_keyboard_hardware;
+
+/*
+ * For now. Needs to be changed for RC3xxx support. See below.
+ */
+#define keyboard_hardware       jazz_keyboard_hardware
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * i8042 keyboard controller for most other Mips machines.
+ */
+#define MIPS_KEYBOARD_ADDRESS   0xb9005000
+#define MIPS_KEYBOARD_DATA      0xb9005003
+#define MIPS_KEYBOARD_COMMAND   0xb9005007
+
+/*
+ * Serial and parallel ports (WD 16C552) on the Mips JAZZ
+ */
+#define JAZZ_SERIAL1_BASE       (unsigned int)0xe0006000
+#define JAZZ_SERIAL2_BASE       (unsigned int)0xe0007000
+#define JAZZ_PARALLEL_BASE      (unsigned int)0xe0008000
+
+/*
+ * Dummy Device Address. Used in jazzdma.c
+ */
+#define JAZZ_DUMMY_DEVICE       0xe000d000
+
+/*
+ * JAZZ timer registers and interrupt no.
+ * Note that the hardware timer interrupt is actually on
+ * cpu level 6, but to keep compatibility with PC stuff
+ * it is remapped to vector 0. See arch/mips/kernel/entry.S.
+ */
+#define JAZZ_TIMER_INTERVAL     0xe0000228
+#define JAZZ_TIMER_REGISTER     0xe0000230
+
+/*
+ * DRAM configuration register
+ */
+#ifndef __ASSEMBLY__
+#ifdef __MIPSEL__
+typedef struct {
+	unsigned int bank2 : 3;
+	unsigned int bank1 : 3;
+	unsigned int mem_bus_width : 1;
+	unsigned int reserved2 : 1;
+	unsigned int page_mode : 1;
+	unsigned int reserved1 : 23;
+} dram_configuration;
+#else /* defined (__MIPSEB__) */
+typedef struct {
+	unsigned int reserved1 : 23;
+	unsigned int page_mode : 1;
+	unsigned int reserved2 : 1;
+	unsigned int mem_bus_width : 1;
+	unsigned int bank1 : 3;
+	unsigned int bank2 : 3;
+} dram_configuration;
+#endif
+#endif /* !__ASSEMBLY__ */
+
+#define PICA_DRAM_CONFIG        0xe00fffe0
+
+/*
+ * JAZZ interrupt control registers
+ */
+#define JAZZ_IO_IRQ_SOURCE      0xe0010000
+#define JAZZ_IO_IRQ_ENABLE      0xe0010002
+
+/*
+ * JAZZ Interrupt Level definitions
+ *
+ * This is somewhat broken.  For reasons which nobody can remember anymore
+ * we remap the Jazz interrupts to the usual ISA style interrupt numbers.
+ */
+#define JAZZ_IRQ_START          24
+#define JAZZ_IRQ_END            (24 + 9)
+#define JAZZ_PARALLEL_IRQ       (JAZZ_IRQ_START + 0)
+#define JAZZ_FLOPPY_IRQ         (JAZZ_IRQ_START + 1)
+#define JAZZ_SOUND_IRQ          (JAZZ_IRQ_START + 2)
+#define JAZZ_VIDEO_IRQ          (JAZZ_IRQ_START + 3)
+#define JAZZ_ETHERNET_IRQ       (JAZZ_IRQ_START + 4)
+#define JAZZ_SCSI_IRQ           (JAZZ_IRQ_START + 5)
+#define JAZZ_KEYBOARD_IRQ       (JAZZ_IRQ_START + 6)
+#define JAZZ_MOUSE_IRQ          (JAZZ_IRQ_START + 7)
+#define JAZZ_SERIAL1_IRQ        (JAZZ_IRQ_START + 8)
+#define JAZZ_SERIAL2_IRQ        (JAZZ_IRQ_START + 9)
+
+#define JAZZ_TIMER_IRQ          (MIPS_CPU_IRQ_BASE+6)
+
+
+/*
+ * JAZZ DMA Channels
+ * Note: Channels 4...7 are not used with respect to the Acer PICA-61
+ * chipset which does not provide these DMA channels.
+ */
+#define JAZZ_SCSI_DMA           0              /* SCSI */
+#define JAZZ_FLOPPY_DMA         1              /* FLOPPY */
+#define JAZZ_AUDIOL_DMA         2              /* AUDIO L */
+#define JAZZ_AUDIOR_DMA         3              /* AUDIO R */
+
+/*
+ * JAZZ R4030 MCT_ADR chip (DMA controller)
+ * Note: Virtual Addresses !
+ */
+#define JAZZ_R4030_CONFIG	0xE0000000	/* R4030 config register */
+#define JAZZ_R4030_REVISION     0xE0000008	/* same as PICA_ASIC_REVISION */
+#define JAZZ_R4030_INV_ADDR	0xE0000010	/* Invalid Address register */
+
+#define JAZZ_R4030_TRSTBL_BASE  0xE0000018	/* Translation Table Base */
+#define JAZZ_R4030_TRSTBL_LIM   0xE0000020	/* Translation Table Limit */
+#define JAZZ_R4030_TRSTBL_INV   0xE0000028	/* Translation Table Invalidate */
+
+#define JAZZ_R4030_CACHE_MTNC   0xE0000030	/* Cache Maintenance */
+#define JAZZ_R4030_R_FAIL_ADDR  0xE0000038	/* Remote Failed Address */
+#define JAZZ_R4030_M_FAIL_ADDR  0xE0000040	/* Memory Failed Address */
+
+#define JAZZ_R4030_CACHE_PTAG   0xE0000048	/* I/O Cache Physical Tag */
+#define JAZZ_R4030_CACHE_LTAG   0xE0000050	/* I/O Cache Logical Tag */
+#define JAZZ_R4030_CACHE_BMASK  0xE0000058	/* I/O Cache Byte Mask */
+#define JAZZ_R4030_CACHE_BWIN   0xE0000060	/* I/O Cache Buffer Window */
+
+/*
+ * Remote Speed Registers.
+ *
+ *  0: free,      1: Ethernet,  2: SCSI,      3: Floppy,
+ *  4: RTC,       5: Kb./Mouse  6: serial 1,  7: serial 2,
+ *  8: parallel,  9: NVRAM,    10: CPU,      11: PROM,
+ * 12: reserved, 13: free,     14: 7seg LED, 15: ???
+ */
+#define JAZZ_R4030_REM_SPEED	0xE0000070	/* 16 Remote Speed Registers */
+						/* 0xE0000070,78,80... 0xE00000E8 */
+#define JAZZ_R4030_IRQ_ENABLE   0xE00000E8	/* Internal Interrupt Enable */
+#define JAZZ_R4030_INVAL_ADDR   0xE0000010	/* Invalid address Register */
+#define JAZZ_R4030_IRQ_SOURCE   0xE0000200	/* Interrupt Source Register */
+#define JAZZ_R4030_I386_ERROR   0xE0000208	/* i386/EISA Bus Error */
+
+/*
+ * Virtual (E)ISA controller address
+ */
+#define JAZZ_EISA_IRQ_ACK	0xE0000238	/* EISA interrupt acknowledge */
+
+/*
+ * Access the R4030 DMA and I/O Controller
+ */
+#ifndef __ASSEMBLY__
+
+static inline void r4030_delay(void)
+{
+__asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	"nop\n\t"
+	"nop\n\t"
+	"nop\n\t"
+	"nop\n\t"
+	".set\treorder");
+}
+
+static inline unsigned short r4030_read_reg16(unsigned long addr)
+{
+	unsigned short ret = *((volatile unsigned short *)addr);
+	r4030_delay();
+	return ret;
+}
+
+static inline unsigned int r4030_read_reg32(unsigned long addr)
+{
+	unsigned int ret = *((volatile unsigned int *)addr);
+	r4030_delay();
+	return ret;
+}
+
+static inline void r4030_write_reg16(unsigned long addr, unsigned val)
+{
+	*((volatile unsigned short *)addr) = val;
+	r4030_delay();
+}
+
+static inline void r4030_write_reg32(unsigned long addr, unsigned val)
+{
+	*((volatile unsigned int *)addr) = val;
+	r4030_delay();
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#define JAZZ_FDC_BASE	0xe0003000
+#define JAZZ_RTC_BASE	0xe0004000
+#define JAZZ_PORT_BASE	0xe2000000
+
+#define JAZZ_EISA_BASE	0xe3000000
+
+#endif /* __ASM_JAZZ_H */
diff --git a/arch/mips/include/asm/jazzdma.h b/arch/mips/include/asm/jazzdma.h
new file mode 100644
index 0000000..8bb37bb
--- /dev/null
+++ b/arch/mips/include/asm/jazzdma.h
@@ -0,0 +1,95 @@
+/*
+ * Helpfile for jazzdma.c -- Mips Jazz R4030 DMA controller support
+ */
+#ifndef _ASM_JAZZDMA_H
+#define _ASM_JAZZDMA_H
+
+/*
+ * Prototypes and macros
+ */
+extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size);
+extern int vdma_free(unsigned long laddr);
+extern int vdma_remap(unsigned long laddr, unsigned long paddr,
+                      unsigned long size);
+extern unsigned long vdma_phys2log(unsigned long paddr);
+extern unsigned long vdma_log2phys(unsigned long laddr);
+extern void vdma_stats(void);		/* for debugging only */
+
+extern void vdma_enable(int channel);
+extern void vdma_disable(int channel);
+extern void vdma_set_mode(int channel, int mode);
+extern void vdma_set_addr(int channel, long addr);
+extern void vdma_set_count(int channel, int count);
+extern int vdma_get_residue(int channel);
+extern int vdma_get_enable(int channel);
+
+/*
+ * some definitions used by the driver functions
+ */
+#define VDMA_PAGESIZE		4096
+#define VDMA_PGTBL_ENTRIES	4096
+#define VDMA_PGTBL_SIZE		(sizeof(VDMA_PGTBL_ENTRY) * VDMA_PGTBL_ENTRIES)
+#define VDMA_PAGE_EMPTY		0xff000000
+
+/*
+ * Macros to get page no. and offset of a given address
+ * Note that VDMA_PAGE() works for physical addresses only
+ */
+#define VDMA_PAGE(a)            ((unsigned int)(a) >> 12)
+#define VDMA_OFFSET(a)          ((unsigned int)(a) & (VDMA_PAGESIZE-1))
+
+/*
+ * error code returned by vdma_alloc()
+ * (See also arch/mips/kernel/jazzdma.c)
+ */
+#define VDMA_ERROR              0xffffffff
+
+/*
+ * VDMA pagetable entry description
+ */
+typedef volatile struct VDMA_PGTBL_ENTRY {
+	unsigned int frame;		/* physical frame no. */
+	unsigned int owner;		/* owner of this entry (0=free) */
+} VDMA_PGTBL_ENTRY;
+
+
+/*
+ * DMA channel control registers
+ * in the R4030 MCT_ADR chip
+ */
+#define JAZZ_R4030_CHNL_MODE	0xE0000100	/* 8 DMA Channel Mode Registers, */
+						/* 0xE0000100,120,140... */
+#define JAZZ_R4030_CHNL_ENABLE  0xE0000108	/* 8 DMA Channel Enable Regs, */
+						/* 0xE0000108,128,148... */
+#define JAZZ_R4030_CHNL_COUNT   0xE0000110	/* 8 DMA Channel Byte Cnt Regs, */
+						/* 0xE0000110,130,150... */
+#define JAZZ_R4030_CHNL_ADDR	0xE0000118	/* 8 DMA Channel Address Regs, */
+						/* 0xE0000118,138,158... */
+
+/* channel enable register bits */
+
+#define R4030_CHNL_ENABLE        (1<<0)
+#define R4030_CHNL_WRITE         (1<<1)
+#define R4030_TC_INTR            (1<<8)
+#define R4030_MEM_INTR           (1<<9)
+#define R4030_ADDR_INTR          (1<<10)
+
+/*
+ * Channel mode register bits
+ */
+#define R4030_MODE_ATIME_40      (0) /* device access time on remote bus */
+#define R4030_MODE_ATIME_80      (1)
+#define R4030_MODE_ATIME_120     (2)
+#define R4030_MODE_ATIME_160     (3)
+#define R4030_MODE_ATIME_200     (4)
+#define R4030_MODE_ATIME_240     (5)
+#define R4030_MODE_ATIME_280     (6)
+#define R4030_MODE_ATIME_320     (7)
+#define R4030_MODE_WIDTH_8       (1<<3)	/* device data bus width */
+#define R4030_MODE_WIDTH_16      (2<<3)
+#define R4030_MODE_WIDTH_32      (3<<3)
+#define R4030_MODE_INTR_EN       (1<<5)
+#define R4030_MODE_BURST         (1<<6)	/* Rev. 2 only */
+#define R4030_MODE_FAST_ACK      (1<<7)	/* Rev. 2 only */
+
+#endif /* _ASM_JAZZDMA_H */
diff --git a/arch/mips/include/asm/kdebug.h b/arch/mips/include/asm/kdebug.h
new file mode 100644
index 0000000..5bf62aa
--- /dev/null
+++ b/arch/mips/include/asm/kdebug.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_FP,
+	DIE_TRAP,
+	DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/arch/mips/include/asm/kexec.h b/arch/mips/include/asm/kexec.h
new file mode 100644
index 0000000..4314892
--- /dev/null
+++ b/arch/mips/include/asm/kexec.h
@@ -0,0 +1,30 @@
+/*
+ * kexec.h for kexec
+ * Created by <nschichan@corp.free.fr> on Thu Oct 12 14:59:34 2006
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+#ifndef _MIPS_KEXEC
+# define _MIPS_KEXEC
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000)
+ /* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
+
+#define KEXEC_CONTROL_PAGE_SIZE 4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_MIPS
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+				    struct pt_regs *oldregs)
+{
+	/* Dummy implementation for now */
+}
+
+#endif /* !_MIPS_KEXEC */
diff --git a/arch/mips/include/asm/kgdb.h b/arch/mips/include/asm/kgdb.h
new file mode 100644
index 0000000..48223b0
--- /dev/null
+++ b/arch/mips/include/asm/kgdb.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX			2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES		(90*sizeof(u32))
+#define NUMCRITREGBYTES		(12*sizeof(u32))
+#else
+#define NUMREGBYTES		(90*sizeof(u64))
+#define NUMCRITREGBYTES		(12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE	4
+#define CACHE_FLUSH_IS_SAFE	0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif				/* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */
diff --git a/arch/mips/include/asm/kmap_types.h b/arch/mips/include/asm/kmap_types.h
new file mode 100644
index 0000000..806aae3
--- /dev/null
+++ b/arch/mips/include/asm/kmap_types.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/arch/mips/include/asm/kspd.h b/arch/mips/include/asm/kspd.h
new file mode 100644
index 0000000..4e9e724
--- /dev/null
+++ b/arch/mips/include/asm/kspd.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_KSPD_H
+#define _ASM_KSPD_H
+
+struct kspd_notifications {
+	void (*kspd_sp_exit)(int sp_id);
+
+	struct list_head list;
+};
+
+#ifdef CONFIG_MIPS_APSP_KSPD
+extern void kspd_notify(struct kspd_notifications *notify);
+#else
+static inline void kspd_notify(struct kspd_notifications *notify)
+{
+}
+#endif
+
+#endif
diff --git a/arch/mips/include/asm/lasat/ds1603.h b/arch/mips/include/asm/lasat/ds1603.h
new file mode 100644
index 0000000..edcd754
--- /dev/null
+++ b/arch/mips/include/asm/lasat/ds1603.h
@@ -0,0 +1,18 @@
+#include <asm/addrspace.h>
+
+/* Lasat 100	*/
+#define DS1603_REG_100		(KSEG1ADDR(0x1c810000))
+#define DS1603_RST_100		(1 << 2)
+#define DS1603_CLK_100		(1 << 0)
+#define DS1603_DATA_SHIFT_100	1
+#define DS1603_DATA_100		(1 << DS1603_DATA_SHIFT_100)
+
+/* Lasat 200	*/
+#define DS1603_REG_200		(KSEG1ADDR(0x11000000))
+#define DS1603_RST_200		(1 << 3)
+#define DS1603_CLK_200		(1 << 4)
+#define DS1603_DATA_200		(1 << 5)
+
+#define DS1603_DATA_REG_200		(DS1603_REG_200 + 0x10000)
+#define DS1603_DATA_READ_SHIFT_200	9
+#define DS1603_DATA_READ_200	(1 << DS1603_DATA_READ_SHIFT_200)
diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h
new file mode 100644
index 0000000..3dac2036
--- /dev/null
+++ b/arch/mips/include/asm/lasat/eeprom.h
@@ -0,0 +1,17 @@
+#include <asm/addrspace.h>
+
+/* lasat 100 */
+#define AT93C_REG_100               KSEG1ADDR(0x1c810000)
+#define AT93C_RDATA_REG_100         AT93C_REG_100
+#define AT93C_RDATA_SHIFT_100       4
+#define AT93C_WDATA_SHIFT_100       4
+#define AT93C_CS_M_100              (1 << 5)
+#define AT93C_CLK_M_100             (1 << 3)
+
+/* lasat 200 */
+#define AT93C_REG_200		KSEG1ADDR(0x11000000)
+#define AT93C_RDATA_REG_200	(AT93C_REG_200+0x10000)
+#define AT93C_RDATA_SHIFT_200	8
+#define AT93C_WDATA_SHIFT_200	2
+#define AT93C_CS_M_200		(1 << 0)
+#define AT93C_CLK_M_200		(1 << 1)
diff --git a/arch/mips/include/asm/lasat/head.h b/arch/mips/include/asm/lasat/head.h
new file mode 100644
index 0000000..f5589f3
--- /dev/null
+++ b/arch/mips/include/asm/lasat/head.h
@@ -0,0 +1,22 @@
+/*
+ * Image header stuff
+ */
+#ifndef _HEAD_H
+#define _HEAD_H
+
+#define LASAT_K_MAGIC0_VAL	0xfedeabba
+#define LASAT_K_MAGIC1_VAL	0x00bedead
+
+#ifndef _LANGUAGE_ASSEMBLY
+#include <linux/types.h>
+struct bootloader_header {
+	u32 magic[2];
+	u32 version;
+	u32 image_start;
+	u32 image_size;
+	u32 kernel_start;
+	u32 kernel_entry;
+};
+#endif
+
+#endif /* _HEAD_H */
diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
new file mode 100644
index 0000000..caeba1e
--- /dev/null
+++ b/arch/mips/include/asm/lasat/lasat.h
@@ -0,0 +1,258 @@
+/*
+ * lasat.h
+ *
+ * Thomas Horsten <thh@lasat.com>
+ * Copyright (C) 2000 LASAT Networks A/S.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Configuration for LASAT boards, loads the appropriate include files.
+ */
+#ifndef _LASAT_H
+#define _LASAT_H
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+extern struct lasat_misc {
+	volatile u32 *reset_reg;
+	volatile u32 *flash_wp_reg;
+	u32 flash_wp_bit;
+} *lasat_misc;
+
+enum lasat_mtdparts {
+	LASAT_MTD_BOOTLOADER,
+	LASAT_MTD_SERVICE,
+	LASAT_MTD_NORMAL,
+	LASAT_MTD_CONFIG,
+	LASAT_MTD_FS,
+	LASAT_MTD_LAST
+};
+
+/*
+ * The format of the data record in the EEPROM.
+ * See Documentation/LASAT/eeprom.txt for a detailed description
+ * of the fields in this struct, and the LASAT Hardware Configuration
+ * field specification for a detailed description of the config
+ * field.
+ */
+#include <linux/types.h>
+
+#define LASAT_EEPROM_VERSION 7
+struct lasat_eeprom_struct {
+	unsigned int  version;
+	unsigned int  cfg[3];
+	unsigned char hwaddr[6];
+	unsigned char print_partno[12];
+	unsigned char term0;
+	unsigned char print_serial[14];
+	unsigned char term1;
+	unsigned char prod_partno[12];
+	unsigned char term2;
+	unsigned char prod_serial[14];
+	unsigned char term3;
+	unsigned char passwd_hash[16];
+	unsigned char pwdnull;
+	unsigned char vendid;
+	unsigned char ts_ref;
+	unsigned char ts_signoff;
+	unsigned char reserved[11];
+	unsigned char debugaccess;
+	unsigned short prid;
+	unsigned int  serviceflag;
+	unsigned int  ipaddr;
+	unsigned int  netmask;
+	unsigned int  crc32;
+};
+
+struct lasat_eeprom_struct_pre7 {
+	unsigned int  version;
+	unsigned int  flags[3];
+	unsigned char hwaddr0[6];
+	unsigned char hwaddr1[6];
+	unsigned char print_partno[9];
+	unsigned char term0;
+	unsigned char print_serial[14];
+	unsigned char term1;
+	unsigned char prod_partno[9];
+	unsigned char term2;
+	unsigned char prod_serial[14];
+	unsigned char term3;
+	unsigned char passwd_hash[24];
+	unsigned char pwdnull;
+	unsigned char vendor;
+	unsigned char ts_ref;
+	unsigned char ts_signoff;
+	unsigned char reserved[6];
+	unsigned int  writecount;
+	unsigned int  ipaddr;
+	unsigned int  netmask;
+	unsigned int  crc32;
+};
+
+/* Configuration descriptor encoding - see the doc for details */
+
+#define LASAT_W0_DSCTYPE(v)		(((v))         & 0xf)
+#define LASAT_W0_BMID(v)		(((v) >> 0x04) & 0xf)
+#define LASAT_W0_CPUTYPE(v)		(((v) >> 0x08) & 0xf)
+#define LASAT_W0_BUSSPEED(v)		(((v) >> 0x0c) & 0xf)
+#define LASAT_W0_CPUCLK(v)		(((v) >> 0x10) & 0xf)
+#define LASAT_W0_SDRAMBANKSZ(v)		(((v) >> 0x14) & 0xf)
+#define LASAT_W0_SDRAMBANKS(v)		(((v) >> 0x18) & 0xf)
+#define LASAT_W0_L2CACHE(v)		(((v) >> 0x1c) & 0xf)
+
+#define LASAT_W1_EDHAC(v)		(((v))         & 0xf)
+#define LASAT_W1_HIFN(v)		(((v) >> 0x04) & 0x1)
+#define LASAT_W1_ISDN(v)		(((v) >> 0x05) & 0x1)
+#define LASAT_W1_IDE(v)			(((v) >> 0x06) & 0x1)
+#define LASAT_W1_HDLC(v)		(((v) >> 0x07) & 0x1)
+#define LASAT_W1_USVERSION(v)		(((v) >> 0x08) & 0x1)
+#define LASAT_W1_4MACS(v)		(((v) >> 0x09) & 0x1)
+#define LASAT_W1_EXTSERIAL(v)		(((v) >> 0x0a) & 0x1)
+#define LASAT_W1_FLASHSIZE(v)		(((v) >> 0x0c) & 0xf)
+#define LASAT_W1_PCISLOTS(v)		(((v) >> 0x10) & 0xf)
+#define LASAT_W1_PCI1OPT(v)		(((v) >> 0x14) & 0xf)
+#define LASAT_W1_PCI2OPT(v)		(((v) >> 0x18) & 0xf)
+#define LASAT_W1_PCI3OPT(v)		(((v) >> 0x1c) & 0xf)
+
+/* Routines specific to LASAT boards */
+
+#define LASAT_BMID_MASQUERADE2		0
+#define LASAT_BMID_MASQUERADEPRO	1
+#define LASAT_BMID_SAFEPIPE25		2
+#define LASAT_BMID_SAFEPIPE50		3
+#define LASAT_BMID_SAFEPIPE100		4
+#define LASAT_BMID_SAFEPIPE5000		5
+#define LASAT_BMID_SAFEPIPE7000		6
+#define LASAT_BMID_SAFEPIPE1000		7
+#if 0
+#define LASAT_BMID_SAFEPIPE30		7
+#define LASAT_BMID_SAFEPIPE5100		8
+#define LASAT_BMID_SAFEPIPE7100		9
+#endif
+#define LASAT_BMID_UNKNOWN		0xf
+#define LASAT_MAX_BMID_NAMES		9   /* no larger than 15! */
+
+#define LASAT_HAS_EDHAC			(1 << 0)
+#define LASAT_EDHAC_FAST		(1 << 1)
+#define LASAT_HAS_EADI			(1 << 2)
+#define LASAT_HAS_HIFN			(1 << 3)
+#define LASAT_HAS_ISDN			(1 << 4)
+#define LASAT_HAS_LEASEDLINE_IF		(1 << 5)
+#define LASAT_HAS_HDC			(1 << 6)
+
+#define LASAT_PRID_MASQUERADE2		0
+#define LASAT_PRID_MASQUERADEPRO	1
+#define LASAT_PRID_SAFEPIPE25		2
+#define LASAT_PRID_SAFEPIPE50		3
+#define LASAT_PRID_SAFEPIPE100		4
+#define LASAT_PRID_SAFEPIPE5000		5
+#define LASAT_PRID_SAFEPIPE7000		6
+#define LASAT_PRID_SAFEPIPE30		7
+#define LASAT_PRID_SAFEPIPE5100		8
+#define LASAT_PRID_SAFEPIPE7100		9
+
+#define LASAT_PRID_SAFEPIPE1110		10
+#define LASAT_PRID_SAFEPIPE3020		11
+#define LASAT_PRID_SAFEPIPE3030		12
+#define LASAT_PRID_SAFEPIPE5020		13
+#define LASAT_PRID_SAFEPIPE5030		14
+#define LASAT_PRID_SAFEPIPE1120		15
+#define LASAT_PRID_SAFEPIPE1130		16
+#define LASAT_PRID_SAFEPIPE6010		17
+#define LASAT_PRID_SAFEPIPE6110		18
+#define LASAT_PRID_SAFEPIPE6210		19
+#define LASAT_PRID_SAFEPIPE1020		20
+#define LASAT_PRID_SAFEPIPE1040		21
+#define LASAT_PRID_SAFEPIPE1060		22
+
+struct lasat_info {
+	unsigned int  li_cpu_hz;
+	unsigned int  li_bus_hz;
+	unsigned int  li_bmid;
+	unsigned int  li_memsize;
+	unsigned int  li_flash_size;
+	unsigned int  li_prid;
+	unsigned char li_bmstr[16];
+	unsigned char li_namestr[32];
+	unsigned char li_typestr[16];
+	/* Info on the Flash layout */
+	unsigned int  li_flash_base;
+	unsigned long li_flashpart_base[LASAT_MTD_LAST];
+	unsigned long li_flashpart_size[LASAT_MTD_LAST];
+	struct lasat_eeprom_struct li_eeprom_info;
+	unsigned int  li_eeprom_upgrade_version;
+	unsigned int  li_debugaccess;
+};
+
+extern struct lasat_info lasat_board_info;
+
+static inline unsigned long lasat_flash_partition_start(int partno)
+{
+	if (partno < 0 || partno >= LASAT_MTD_LAST)
+		return 0;
+
+	return lasat_board_info.li_flashpart_base[partno];
+}
+
+static inline unsigned long lasat_flash_partition_size(int partno)
+{
+	if (partno < 0 || partno >= LASAT_MTD_LAST)
+		return 0;
+
+	return lasat_board_info.li_flashpart_size[partno];
+}
+
+/* Called from setup() to initialize the global board_info struct */
+extern int lasat_init_board_info(void);
+
+/* Write the modified EEPROM info struct */
+extern void lasat_write_eeprom_info(void);
+
+#define N_MACHTYPES		2
+/* for calibration of delays */
+
+/* the lasat_ndelay function is necessary because it is used at an
+ * early stage of the boot process where ndelay is not calibrated.
+ * It is used for the bit-banging rtc and eeprom drivers */
+
+#include <linux/delay.h>
+
+/* calculating with the slowest board with 100 MHz clock */
+#define LASAT_100_DIVIDER 20
+/* All 200's run at 250 MHz clock */
+#define LASAT_200_DIVIDER 8
+
+extern unsigned int lasat_ndelay_divider;
+
+static inline void lasat_ndelay(unsigned int ns)
+{
+	__delay(ns / lasat_ndelay_divider);
+}
+
+#define IS_LASAT_200()     (current_cpu_data.cputype == CPU_R5000)
+
+#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+
+#define LASAT_SERVICEMODE_MAGIC_1     0xdeadbeef
+#define LASAT_SERVICEMODE_MAGIC_2     0xfedeabba
+
+/* Lasat 100 boards */
+#define LASAT_GT_BASE           (KSEG1ADDR(0x14000000))
+
+/* Lasat 200 boards */
+#define Vrc5074_PHYS_BASE       0x1fa00000
+#define Vrc5074_BASE            (KSEG1ADDR(Vrc5074_PHYS_BASE))
+#define PCI_WINDOW1             0x1a000000
+
+#endif /* _LASAT_H */
diff --git a/arch/mips/include/asm/lasat/lasatint.h b/arch/mips/include/asm/lasat/lasatint.h
new file mode 100644
index 0000000..e0d2458
--- /dev/null
+++ b/arch/mips/include/asm/lasat/lasatint.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_LASAT_LASATINT_H
+#define __ASM_LASAT_LASATINT_H
+
+/* lasat 100 */
+#define LASAT_INT_STATUS_REG_100	(KSEG1ADDR(0x1c880000))
+#define LASAT_INT_MASK_REG_100		(KSEG1ADDR(0x1c890000))
+#define LASATINT_MASK_SHIFT_100		0
+
+/* lasat 200 */
+#define LASAT_INT_STATUS_REG_200	(KSEG1ADDR(0x1104003c))
+#define LASAT_INT_MASK_REG_200		(KSEG1ADDR(0x1104003c))
+#define LASATINT_MASK_SHIFT_200		16
+
+#endif /* __ASM_LASAT_LASATINT_H */
diff --git a/arch/mips/include/asm/lasat/picvue.h b/arch/mips/include/asm/lasat/picvue.h
new file mode 100644
index 0000000..42a492e
--- /dev/null
+++ b/arch/mips/include/asm/lasat/picvue.h
@@ -0,0 +1,15 @@
+/* Lasat 100 */
+#define PVC_REG_100		KSEG1ADDR(0x1c820000)
+#define PVC_DATA_SHIFT_100	0
+#define PVC_DATA_M_100		0xFF
+#define PVC_E_100		(1 << 8)
+#define PVC_RW_100		(1 << 9)
+#define PVC_RS_100		(1 << 10)
+
+/* Lasat 200 */
+#define PVC_REG_200		KSEG1ADDR(0x11000000)
+#define PVC_DATA_SHIFT_200	24
+#define PVC_DATA_M_200		(0xFF << PVC_DATA_SHIFT_200)
+#define PVC_E_200		(1 << 16)
+#define PVC_RW_200		(1 << 17)
+#define PVC_RS_200		(1 << 18)
diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h
new file mode 100644
index 0000000..1c37d70
--- /dev/null
+++ b/arch/mips/include/asm/lasat/serial.h
@@ -0,0 +1,13 @@
+#include <asm/lasat/lasat.h>
+
+/* Lasat 100 boards serial configuration */
+#define LASAT_BASE_BAUD_100 		(7372800 / 16)
+#define LASAT_UART_REGS_BASE_100	0x1c8b0000
+#define LASAT_UART_REGS_SHIFT_100	2
+#define LASATINT_UART_100		16
+
+/* * LASAT 200 boards serial configuration */
+#define LASAT_BASE_BAUD_200		(100000000 / 16 / 12)
+#define LASAT_UART_REGS_BASE_200	(Vrc5074_PHYS_BASE + 0x0300)
+#define LASAT_UART_REGS_SHIFT_200	3
+#define LASATINT_UART_200		21
diff --git a/arch/mips/include/asm/linkage.h b/arch/mips/include/asm/linkage.h
new file mode 100644
index 0000000..e9a940d
--- /dev/null
+++ b/arch/mips/include/asm/linkage.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#ifdef __ASSEMBLY__
+#include <asm/asm.h>
+#endif
+
+#define __weak __attribute__((weak))
+
+#endif
diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h
new file mode 100644
index 0000000..f96fd59
--- /dev/null
+++ b/arch/mips/include/asm/local.h
@@ -0,0 +1,221 @@
+#ifndef _ARCH_MIPS_LOCAL_H
+#define _ARCH_MIPS_LOCAL_H
+
+#include <linux/percpu.h>
+#include <linux/bitops.h>
+#include <asm/atomic.h>
+#include <asm/cmpxchg.h>
+#include <asm/war.h>
+
+typedef struct
+{
+	atomic_long_t a;
+} local_t;
+
+#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+
+#define local_read(l)	atomic_long_read(&(l)->a)
+#define local_set(l, i)	atomic_long_set(&(l)->a, (i))
+
+#define local_add(i, l)	atomic_long_add((i), (&(l)->a))
+#define local_sub(i, l)	atomic_long_sub((i), (&(l)->a))
+#define local_inc(l)	atomic_long_inc(&(l)->a)
+#define local_dec(l)	atomic_long_dec(&(l)->a)
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ long local_add_return(long i, local_t * l)
+{
+	unsigned long result;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:"	__LL	"%1, %2		# local_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+			__SC	"%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+		: "Ir" (i), "m" (l->a.counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:"	__LL	"%1, %2		# local_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+			__SC	"%0, %2					\n"
+		"	beqz	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+		: "Ir" (i), "m" (l->a.counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		result = l->a.counter;
+		result += i;
+		l->a.counter = result;
+		local_irq_restore(flags);
+	}
+
+	return result;
+}
+
+static __inline__ long local_sub_return(long i, local_t * l)
+{
+	unsigned long result;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:"	__LL	"%1, %2		# local_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+			__SC	"%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+		: "Ir" (i), "m" (l->a.counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:"	__LL	"%1, %2		# local_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+			__SC	"%0, %2					\n"
+		"	beqz	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+		: "Ir" (i), "m" (l->a.counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		result = l->a.counter;
+		result -= i;
+		l->a.counter = result;
+		local_irq_restore(flags);
+	}
+
+	return result;
+}
+
+#define local_cmpxchg(l, o, n) \
+	((long)cmpxchg_local(&((l)->a.counter), (o), (n)))
+#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
+
+/**
+ * local_add_unless - add unless the number is a given value
+ * @l: pointer of type local_t
+ * @a: the amount to add to l...
+ * @u: ...unless l is equal to u.
+ *
+ * Atomically adds @a to @l, so long as it was not @u.
+ * Returns non-zero if @l was not @u, and zero otherwise.
+ */
+#define local_add_unless(l, a, u)				\
+({								\
+	long c, old;						\
+	c = local_read(l);					\
+	while (c != (u) && (old = local_cmpxchg((l), c, c + (a))) != c) \
+		c = old;					\
+	c != (u);						\
+})
+#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
+
+#define local_dec_return(l) local_sub_return(1, (l))
+#define local_inc_return(l) local_add_return(1, (l))
+
+/*
+ * local_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @l: pointer of type local_t
+ *
+ * Atomically subtracts @i from @l and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0)
+
+/*
+ * local_inc_and_test - increment and test
+ * @l: pointer of type local_t
+ *
+ * Atomically increments @l by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_inc_and_test(l) (local_inc_return(l) == 0)
+
+/*
+ * local_dec_and_test - decrement by 1 and test
+ * @l: pointer of type local_t
+ *
+ * Atomically decrements @l by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define local_dec_and_test(l) (local_sub_return(1, (l)) == 0)
+
+/*
+ * local_add_negative - add and test if negative
+ * @l: pointer of type local_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @l and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define local_add_negative(i, l) (local_add_return(i, (l)) < 0)
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+
+#define __local_inc(l)		((l)->a.counter++)
+#define __local_dec(l)		((l)->a.counter++)
+#define __local_add(i, l)	((l)->a.counter+=(i))
+#define __local_sub(i, l)	((l)->a.counter-=(i))
+
+/* Need to disable preemption for the cpu local counters otherwise we could
+   still access a variable of a previous CPU in a non atomic way. */
+#define cpu_local_wrap_v(l)	 	\
+	({ local_t res__;		\
+	   preempt_disable(); 		\
+	   res__ = (l);			\
+	   preempt_enable();		\
+	   res__; })
+#define cpu_local_wrap(l)		\
+	({ preempt_disable();		\
+	   l;				\
+	   preempt_enable(); })		\
+
+#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
+#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
+#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var(l)))
+#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var(l)))
+#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
+#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
+
+#define __cpu_local_inc(l)	cpu_local_inc(l)
+#define __cpu_local_dec(l)	cpu_local_dec(l)
+#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
+#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
+
+#endif /* _ARCH_MIPS_LOCAL_H */
diff --git a/arch/mips/include/asm/m48t35.h b/arch/mips/include/asm/m48t35.h
new file mode 100644
index 0000000..f44852e
--- /dev/null
+++ b/arch/mips/include/asm/m48t35.h
@@ -0,0 +1,27 @@
+/*
+ *  Registers for the SGS-Thomson M48T35 Timekeeper RAM chip
+ */
+#ifndef _ASM_M48T35_H
+#define _ASM_M48T35_H
+
+#include <linux/spinlock.h>
+
+extern spinlock_t rtc_lock;
+
+struct m48t35_rtc {
+	volatile u8	pad[0x7ff8];    /* starts at 0x7ff8 */
+	volatile u8	control;
+	volatile u8	sec;
+	volatile u8	min;
+	volatile u8	hour;
+	volatile u8	day;
+	volatile u8	date;
+	volatile u8	month;
+	volatile u8	year;
+};
+
+#define M48T35_RTC_SET		0x80
+#define M48T35_RTC_STOPPED	0x80
+#define M48T35_RTC_READ		0x40
+
+#endif /* _ASM_M48T35_H */
diff --git a/arch/mips/include/asm/m48t37.h b/arch/mips/include/asm/m48t37.h
new file mode 100644
index 0000000..cabf862
--- /dev/null
+++ b/arch/mips/include/asm/m48t37.h
@@ -0,0 +1,35 @@
+/*
+ *  Registers for the SGS-Thomson M48T37 Timekeeper RAM chip
+ */
+#ifndef _ASM_M48T37_H
+#define _ASM_M48T37_H
+
+#include <linux/spinlock.h>
+
+extern spinlock_t rtc_lock;
+
+struct m48t37_rtc {
+	volatile u8	pad[0x7ff0];    /* NVRAM */
+	volatile u8	flags;
+	volatile u8	century;
+	volatile u8	alarm_sec;
+	volatile u8	alarm_min;
+	volatile u8	alarm_hour;
+	volatile u8	alarm_data;
+	volatile u8	interrupts;
+	volatile u8	watchdog;
+	volatile u8	control;
+	volatile u8	sec;
+	volatile u8	min;
+	volatile u8	hour;
+	volatile u8	day;
+	volatile u8	date;
+	volatile u8	month;
+	volatile u8	year;
+};
+
+#define M48T37_RTC_SET		0x80
+#define M48T37_RTC_STOPPED	0x80
+#define M48T37_RTC_READ		0x40
+
+#endif /* _ASM_M48T37_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
new file mode 100644
index 0000000..0d302ba
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -0,0 +1,1772 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2000-2001, 2006-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+ /*
+  * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp
+  */
+
+#ifndef _AU1000_H_
+#define _AU1000_H_
+
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+
+/* cpu pipeline flush */
+void static inline au_sync(void)
+{
+	__asm__ volatile ("sync");
+}
+
+void static inline au_sync_udelay(int us)
+{
+	__asm__ volatile ("sync");
+	udelay(us);
+}
+
+void static inline au_sync_delay(int ms)
+{
+	__asm__ volatile ("sync");
+	mdelay(ms);
+}
+
+void static inline au_writeb(u8 val, unsigned long reg)
+{
+	*(volatile u8 *)reg = val;
+}
+
+void static inline au_writew(u16 val, unsigned long reg)
+{
+	*(volatile u16 *)reg = val;
+}
+
+void static inline au_writel(u32 val, unsigned long reg)
+{
+	*(volatile u32 *)reg = val;
+}
+
+static inline u8 au_readb(unsigned long reg)
+{
+	return *(volatile u8 *)reg;
+}
+
+static inline u16 au_readw(unsigned long reg)
+{
+	return *(volatile u16 *)reg;
+}
+
+static inline u32 au_readl(unsigned long reg)
+{
+	return *(volatile u32 *)reg;
+}
+
+
+/* arch/mips/au1000/common/clocks.c */
+extern void set_au1x00_speed(unsigned int new_freq);
+extern unsigned int get_au1x00_speed(void);
+extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
+extern unsigned long get_au1x00_uart_baud_base(void);
+extern void set_au1x00_lcd_clock(void);
+extern unsigned int get_au1x00_lcd_clock(void);
+
+/*
+ * Every board describes its IRQ mapping with this table.
+ */
+struct au1xxx_irqmap {
+	int	im_irq;
+	int	im_type;
+	int	im_request;
+};
+
+/*
+ * init_IRQ looks for a table with this name.
+ */
+extern struct au1xxx_irqmap au1xxx_irq_map[];
+
+#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+
+/*
+ * SDRAM register offsets
+ */
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+    defined(CONFIG_SOC_AU1100)
+#define MEM_SDMODE0		0x0000
+#define MEM_SDMODE1		0x0004
+#define MEM_SDMODE2		0x0008
+#define MEM_SDADDR0		0x000C
+#define MEM_SDADDR1		0x0010
+#define MEM_SDADDR2		0x0014
+#define MEM_SDREFCFG		0x0018
+#define MEM_SDPRECMD		0x001C
+#define MEM_SDAUTOREF		0x0020
+#define MEM_SDWRMD0		0x0024
+#define MEM_SDWRMD1		0x0028
+#define MEM_SDWRMD2		0x002C
+#define MEM_SDSLEEP		0x0030
+#define MEM_SDSMCKE		0x0034
+
+/*
+ * MEM_SDMODE register content definitions
+ */
+#define MEM_SDMODE_F		(1 << 22)
+#define MEM_SDMODE_SR		(1 << 21)
+#define MEM_SDMODE_BS		(1 << 20)
+#define MEM_SDMODE_RS		(3 << 18)
+#define MEM_SDMODE_CS		(7 << 15)
+#define MEM_SDMODE_TRAS 	(15 << 11)
+#define MEM_SDMODE_TMRD 	(3 << 9)
+#define MEM_SDMODE_TWR		(3 << 7)
+#define MEM_SDMODE_TRP		(3 << 5)
+#define MEM_SDMODE_TRCD 	(3 << 3)
+#define MEM_SDMODE_TCL		(7 << 0)
+
+#define MEM_SDMODE_BS_2Bank	(0 << 20)
+#define MEM_SDMODE_BS_4Bank	(1 << 20)
+#define MEM_SDMODE_RS_11Row	(0 << 18)
+#define MEM_SDMODE_RS_12Row	(1 << 18)
+#define MEM_SDMODE_RS_13Row	(2 << 18)
+#define MEM_SDMODE_RS_N(N)	((N) << 18)
+#define MEM_SDMODE_CS_7Col	(0 << 15)
+#define MEM_SDMODE_CS_8Col	(1 << 15)
+#define MEM_SDMODE_CS_9Col	(2 << 15)
+#define MEM_SDMODE_CS_10Col	(3 << 15)
+#define MEM_SDMODE_CS_11Col	(4 << 15)
+#define MEM_SDMODE_CS_N(N)	((N) << 15)
+#define MEM_SDMODE_TRAS_N(N)	((N) << 11)
+#define MEM_SDMODE_TMRD_N(N)	((N) << 9)
+#define MEM_SDMODE_TWR_N(N)	((N) << 7)
+#define MEM_SDMODE_TRP_N(N)	((N) << 5)
+#define MEM_SDMODE_TRCD_N(N)	((N) << 3)
+#define MEM_SDMODE_TCL_N(N)	((N) << 0)
+
+/*
+ * MEM_SDADDR register contents definitions
+ */
+#define MEM_SDADDR_E		(1 << 20)
+#define MEM_SDADDR_CSBA 	(0x03FF << 10)
+#define MEM_SDADDR_CSMASK	(0x03FF << 0)
+#define MEM_SDADDR_CSBA_N(N)	((N) & (0x03FF << 22) >> 12)
+#define MEM_SDADDR_CSMASK_N(N)	((N)&(0x03FF << 22) >> 22)
+
+/*
+ * MEM_SDREFCFG register content definitions
+ */
+#define MEM_SDREFCFG_TRC	(15 << 28)
+#define MEM_SDREFCFG_TRPM	(3 << 26)
+#define MEM_SDREFCFG_E		(1 << 25)
+#define MEM_SDREFCFG_RE 	(0x1ffffff << 0)
+#define MEM_SDREFCFG_TRC_N(N)	((N) << MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N)	((N) << MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N)	(N)
+#endif
+
+/***********************************************************************/
+
+/*
+ * Au1550 SDRAM Register Offsets
+ */
+
+/***********************************************************************/
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_SDMODE0		0x0800
+#define MEM_SDMODE1		0x0808
+#define MEM_SDMODE2		0x0810
+#define MEM_SDADDR0		0x0820
+#define MEM_SDADDR1		0x0828
+#define MEM_SDADDR2		0x0830
+#define MEM_SDCONFIGA		0x0840
+#define MEM_SDCONFIGB		0x0848
+#define MEM_SDSTAT		0x0850
+#define MEM_SDERRADDR		0x0858
+#define MEM_SDSTRIDE0		0x0860
+#define MEM_SDSTRIDE1		0x0868
+#define MEM_SDSTRIDE2		0x0870
+#define MEM_SDWRMD0		0x0880
+#define MEM_SDWRMD1		0x0888
+#define MEM_SDWRMD2		0x0890
+#define MEM_SDPRECMD		0x08C0
+#define MEM_SDAUTOREF		0x08C8
+#define MEM_SDSREF		0x08D0
+#define MEM_SDSLEEP		MEM_SDSREF
+
+#endif
+
+/*
+ * Physical base addresses for integrated peripherals
+ */
+
+#ifdef CONFIG_SOC_AU1000
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	DMA0_PHYS_ADDR		0x14002000
+#define	DMA1_PHYS_ADDR		0x14002100
+#define	DMA2_PHYS_ADDR		0x14002200
+#define	DMA3_PHYS_ADDR		0x14002300
+#define	DMA4_PHYS_ADDR		0x14002400
+#define	DMA5_PHYS_ADDR		0x14002500
+#define	DMA6_PHYS_ADDR		0x14002600
+#define	DMA7_PHYS_ADDR		0x14002700
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	AC97_PHYS_ADDR		0x10000000
+#define	USBH_PHYS_ADDR		0x10100000
+#define	USBD_PHYS_ADDR		0x10200000
+#define	IRDA_PHYS_ADDR		0x10300000
+#define	MAC0_PHYS_ADDR		0x10500000
+#define	MAC1_PHYS_ADDR		0x10510000
+#define	MACEN_PHYS_ADDR		0x10520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	I2S_PHYS_ADDR		0x11000000
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define	UART2_PHYS_ADDR		0x11300000
+#define	UART3_PHYS_ADDR		0x11400000
+#define	SSI0_PHYS_ADDR		0x11600000
+#define	SSI1_PHYS_ADDR		0x11680000
+#define	SYS_PHYS_ADDR		0x11900000
+#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1500
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	DMA0_PHYS_ADDR		0x14002000
+#define	DMA1_PHYS_ADDR		0x14002100
+#define	DMA2_PHYS_ADDR		0x14002200
+#define	DMA3_PHYS_ADDR		0x14002300
+#define	DMA4_PHYS_ADDR		0x14002400
+#define	DMA5_PHYS_ADDR		0x14002500
+#define	DMA6_PHYS_ADDR		0x14002600
+#define	DMA7_PHYS_ADDR		0x14002700
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	AC97_PHYS_ADDR		0x10000000
+#define	USBH_PHYS_ADDR		0x10100000
+#define	USBD_PHYS_ADDR		0x10200000
+#define PCI_PHYS_ADDR		0x14005000
+#define	MAC0_PHYS_ADDR		0x11500000
+#define	MAC1_PHYS_ADDR		0x11510000
+#define	MACEN_PHYS_ADDR		0x11520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	I2S_PHYS_ADDR		0x11000000
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART3_PHYS_ADDR		0x11400000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define PCI_MEM_PHYS_ADDR	0x400000000ULL
+#define PCI_IO_PHYS_ADDR	0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR	0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR	0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1100
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	DMA0_PHYS_ADDR		0x14002000
+#define	DMA1_PHYS_ADDR		0x14002100
+#define	DMA2_PHYS_ADDR		0x14002200
+#define	DMA3_PHYS_ADDR		0x14002300
+#define	DMA4_PHYS_ADDR		0x14002400
+#define	DMA5_PHYS_ADDR		0x14002500
+#define	DMA6_PHYS_ADDR		0x14002600
+#define	DMA7_PHYS_ADDR		0x14002700
+#define	IC0_PHYS_ADDR		0x10400000
+#define SD0_PHYS_ADDR		0x10600000
+#define SD1_PHYS_ADDR		0x10680000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	AC97_PHYS_ADDR		0x10000000
+#define	USBH_PHYS_ADDR		0x10100000
+#define	USBD_PHYS_ADDR		0x10200000
+#define	IRDA_PHYS_ADDR		0x10300000
+#define	MAC0_PHYS_ADDR		0x10500000
+#define	MACEN_PHYS_ADDR		0x10520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	I2S_PHYS_ADDR		0x11000000
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define	UART3_PHYS_ADDR		0x11400000
+#define	SSI0_PHYS_ADDR		0x11600000
+#define	SSI1_PHYS_ADDR		0x11680000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define LCD_PHYS_ADDR		0x15000000
+#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1550
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	USBH_PHYS_ADDR		0x14020000
+#define	USBD_PHYS_ADDR		0x10200000
+#define PCI_PHYS_ADDR		0x14005000
+#define	MAC0_PHYS_ADDR		0x10500000
+#define	MAC1_PHYS_ADDR		0x10510000
+#define	MACEN_PHYS_ADDR		0x10520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define	UART3_PHYS_ADDR		0x11400000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define	DDMA_PHYS_ADDR		0x14002000
+#define PE_PHYS_ADDR		0x14008000
+#define PSC0_PHYS_ADDR		0x11A00000
+#define PSC1_PHYS_ADDR		0x11B00000
+#define PSC2_PHYS_ADDR		0x10A00000
+#define PSC3_PHYS_ADDR		0x10B00000
+#define PCI_MEM_PHYS_ADDR	0x400000000ULL
+#define PCI_IO_PHYS_ADDR	0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR	0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR	0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1200
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define AES_PHYS_ADDR		0x10300000
+#define CIM_PHYS_ADDR		0x14004000
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define USBM_PHYS_ADDR		0x14020000
+#define	USBH_PHYS_ADDR		0x14020100
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define	DDMA_PHYS_ADDR		0x14002000
+#define PSC0_PHYS_ADDR	 	0x11A00000
+#define PSC1_PHYS_ADDR	 	0x11B00000
+#define SD0_PHYS_ADDR		0x10600000
+#define SD1_PHYS_ADDR		0x10680000
+#define LCD_PHYS_ADDR		0x15000000
+#define SWCNT_PHYS_ADDR		0x1110010C
+#define MAEFE_PHYS_ADDR		0x14012000
+#define MAEBE_PHYS_ADDR		0x14010000
+#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
+#endif
+
+/* Static Bus Controller */
+#define MEM_STCFG0		0xB4001000
+#define MEM_STTIME0		0xB4001004
+#define MEM_STADDR0		0xB4001008
+
+#define MEM_STCFG1		0xB4001010
+#define MEM_STTIME1		0xB4001014
+#define MEM_STADDR1		0xB4001018
+
+#define MEM_STCFG2		0xB4001020
+#define MEM_STTIME2		0xB4001024
+#define MEM_STADDR2		0xB4001028
+
+#define MEM_STCFG3		0xB4001030
+#define MEM_STTIME3		0xB4001034
+#define MEM_STADDR3		0xB4001038
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_STNDCTL		0xB4001100
+#define MEM_STSTAT		0xB4001104
+
+#define MEM_STNAND_CMD		0x0
+#define MEM_STNAND_ADDR 	0x4
+#define MEM_STNAND_DATA 	0x20
+#endif
+
+/* Interrupt Controller 0 */
+#define IC0_CFG0RD		0xB0400040
+#define IC0_CFG0SET		0xB0400040
+#define IC0_CFG0CLR		0xB0400044
+
+#define IC0_CFG1RD		0xB0400048
+#define IC0_CFG1SET		0xB0400048
+#define IC0_CFG1CLR		0xB040004C
+
+#define IC0_CFG2RD		0xB0400050
+#define IC0_CFG2SET		0xB0400050
+#define IC0_CFG2CLR		0xB0400054
+
+#define IC0_REQ0INT		0xB0400054
+#define IC0_SRCRD		0xB0400058
+#define IC0_SRCSET		0xB0400058
+#define IC0_SRCCLR		0xB040005C
+#define IC0_REQ1INT		0xB040005C
+
+#define IC0_ASSIGNRD		0xB0400060
+#define IC0_ASSIGNSET		0xB0400060
+#define IC0_ASSIGNCLR		0xB0400064
+
+#define IC0_WAKERD		0xB0400068
+#define IC0_WAKESET		0xB0400068
+#define IC0_WAKECLR		0xB040006C
+
+#define IC0_MASKRD		0xB0400070
+#define IC0_MASKSET		0xB0400070
+#define IC0_MASKCLR		0xB0400074
+
+#define IC0_RISINGRD		0xB0400078
+#define IC0_RISINGCLR		0xB0400078
+#define IC0_FALLINGRD		0xB040007C
+#define IC0_FALLINGCLR		0xB040007C
+
+#define IC0_TESTBIT		0xB0400080
+
+/* Interrupt Controller 1 */
+#define IC1_CFG0RD		0xB1800040
+#define IC1_CFG0SET		0xB1800040
+#define IC1_CFG0CLR		0xB1800044
+
+#define IC1_CFG1RD		0xB1800048
+#define IC1_CFG1SET		0xB1800048
+#define IC1_CFG1CLR		0xB180004C
+
+#define IC1_CFG2RD		0xB1800050
+#define IC1_CFG2SET		0xB1800050
+#define IC1_CFG2CLR		0xB1800054
+
+#define IC1_REQ0INT		0xB1800054
+#define IC1_SRCRD		0xB1800058
+#define IC1_SRCSET		0xB1800058
+#define IC1_SRCCLR		0xB180005C
+#define IC1_REQ1INT		0xB180005C
+
+#define IC1_ASSIGNRD            0xB1800060
+#define IC1_ASSIGNSET           0xB1800060
+#define IC1_ASSIGNCLR           0xB1800064
+
+#define IC1_WAKERD		0xB1800068
+#define IC1_WAKESET		0xB1800068
+#define IC1_WAKECLR		0xB180006C
+
+#define IC1_MASKRD		0xB1800070
+#define IC1_MASKSET		0xB1800070
+#define IC1_MASKCLR		0xB1800074
+
+#define IC1_RISINGRD		0xB1800078
+#define IC1_RISINGCLR		0xB1800078
+#define IC1_FALLINGRD		0xB180007C
+#define IC1_FALLINGCLR		0xB180007C
+
+#define IC1_TESTBIT		0xB1800080
+
+/* Interrupt Configuration Modes */
+#define INTC_INT_DISABLED		0x0
+#define INTC_INT_RISE_EDGE		0x1
+#define INTC_INT_FALL_EDGE		0x2
+#define INTC_INT_RISE_AND_FALL_EDGE	0x3
+#define INTC_INT_HIGH_LEVEL		0x5
+#define INTC_INT_LOW_LEVEL		0x6
+#define INTC_INT_HIGH_AND_LOW_LEVEL	0x7
+
+/* Interrupt Numbers */
+/* Au1000 */
+#ifdef CONFIG_SOC_AU1000
+enum soc_au1000_ints {
+	AU1000_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
+	AU1000_UART0_INT	= AU1000_FIRST_INT,
+	AU1000_UART1_INT,				/* au1000 */
+	AU1000_UART2_INT,				/* au1000 */
+	AU1000_UART3_INT,
+	AU1000_SSI0_INT,				/* au1000 */
+	AU1000_SSI1_INT,				/* au1000 */
+	AU1000_DMA_INT_BASE,
+
+	AU1000_TOY_INT		= AU1000_FIRST_INT + 14,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+	AU1000_IRDA_TX_INT,				/* au1000 */
+	AU1000_IRDA_RX_INT,				/* au1000 */
+	AU1000_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_SUS_INT,
+	AU1000_USB_HOST_INT,
+	AU1000_ACSYNC_INT,
+	AU1000_MAC0_DMA_INT,
+	AU1000_MAC1_DMA_INT,
+	AU1000_I2S_UO_INT,				/* au1000 */
+	AU1000_AC97C_INT,
+	AU1000_GPIO_0,
+	AU1000_GPIO_1,
+	AU1000_GPIO_2,
+	AU1000_GPIO_3,
+	AU1000_GPIO_4,
+	AU1000_GPIO_5,
+	AU1000_GPIO_6,
+	AU1000_GPIO_7,
+	AU1000_GPIO_8,
+	AU1000_GPIO_9,
+	AU1000_GPIO_10,
+	AU1000_GPIO_11,
+	AU1000_GPIO_12,
+	AU1000_GPIO_13,
+	AU1000_GPIO_14,
+	AU1000_GPIO_15,
+	AU1000_GPIO_16,
+	AU1000_GPIO_17,
+	AU1000_GPIO_18,
+	AU1000_GPIO_19,
+	AU1000_GPIO_20,
+	AU1000_GPIO_21,
+	AU1000_GPIO_22,
+	AU1000_GPIO_23,
+	AU1000_GPIO_24,
+	AU1000_GPIO_25,
+	AU1000_GPIO_26,
+	AU1000_GPIO_27,
+	AU1000_GPIO_28,
+	AU1000_GPIO_29,
+	AU1000_GPIO_30,
+	AU1000_GPIO_31,
+};
+
+#define UART0_ADDR		0xB1100000
+#define UART1_ADDR		0xB1200000
+#define UART2_ADDR		0xB1300000
+#define UART3_ADDR		0xB1400000
+
+#define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
+#define USB_HOST_CONFIG 	0xB017FFFC
+
+#define AU1000_ETH0_BASE	0xB0500000
+#define AU1000_ETH1_BASE	0xB0510000
+#define AU1000_MAC0_ENABLE	0xB0520000
+#define AU1000_MAC1_ENABLE	0xB0520004
+#define NUM_ETH_INTERFACES 2
+#endif /* CONFIG_SOC_AU1000 */
+
+/* Au1500 */
+#ifdef CONFIG_SOC_AU1500
+enum soc_au1500_ints {
+	AU1500_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
+	AU1500_UART0_INT	= AU1500_FIRST_INT,
+	AU1000_PCI_INTA,				/* au1500 */
+	AU1000_PCI_INTB,				/* au1500 */
+	AU1500_UART3_INT,
+	AU1000_PCI_INTC,				/* au1500 */
+	AU1000_PCI_INTD,				/* au1500 */
+	AU1000_DMA_INT_BASE,
+
+	AU1000_TOY_INT		= AU1500_FIRST_INT + 14,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+	AU1500_PCI_ERR_INT,
+	AU1500_RESERVED_INT,
+	AU1000_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_SUS_INT,
+	AU1000_USB_HOST_INT,
+	AU1000_ACSYNC_INT,
+	AU1500_MAC0_DMA_INT,
+	AU1500_MAC1_DMA_INT,
+	AU1000_AC97C_INT	= AU1500_FIRST_INT + 31,
+	AU1000_GPIO_0,
+	AU1000_GPIO_1,
+	AU1000_GPIO_2,
+	AU1000_GPIO_3,
+	AU1000_GPIO_4,
+	AU1000_GPIO_5,
+	AU1000_GPIO_6,
+	AU1000_GPIO_7,
+	AU1000_GPIO_8,
+	AU1000_GPIO_9,
+	AU1000_GPIO_10,
+	AU1000_GPIO_11,
+	AU1000_GPIO_12,
+	AU1000_GPIO_13,
+	AU1000_GPIO_14,
+	AU1000_GPIO_15,
+	AU1500_GPIO_200,
+	AU1500_GPIO_201,
+	AU1500_GPIO_202,
+	AU1500_GPIO_203,
+	AU1500_GPIO_20,
+	AU1500_GPIO_204,
+	AU1500_GPIO_205,
+	AU1500_GPIO_23,
+	AU1500_GPIO_24,
+	AU1500_GPIO_25,
+	AU1500_GPIO_26,
+	AU1500_GPIO_27,
+	AU1500_GPIO_28,
+	AU1500_GPIO_206,
+	AU1500_GPIO_207,
+	AU1500_GPIO_208_215,
+};
+
+/* shortcuts */
+#define INTA AU1000_PCI_INTA
+#define INTB AU1000_PCI_INTB
+#define INTC AU1000_PCI_INTC
+#define INTD AU1000_PCI_INTD
+
+#define UART0_ADDR		0xB1100000
+#define UART3_ADDR		0xB1400000
+
+#define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
+#define USB_HOST_CONFIG 	0xB017fffc
+
+#define AU1500_ETH0_BASE	0xB1500000
+#define AU1500_ETH1_BASE	0xB1510000
+#define AU1500_MAC0_ENABLE	0xB1520000
+#define AU1500_MAC1_ENABLE	0xB1520004
+#define NUM_ETH_INTERFACES 2
+#endif /* CONFIG_SOC_AU1500 */
+
+/* Au1100 */
+#ifdef CONFIG_SOC_AU1100
+enum soc_au1100_ints {
+	AU1100_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
+	AU1100_UART0_INT,
+	AU1100_UART1_INT,
+	AU1100_SD_INT,
+	AU1100_UART3_INT,
+	AU1000_SSI0_INT,
+	AU1000_SSI1_INT,
+	AU1000_DMA_INT_BASE,
+
+	AU1000_TOY_INT		= AU1100_FIRST_INT + 14,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+	AU1000_IRDA_TX_INT,
+	AU1000_IRDA_RX_INT,
+	AU1000_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_SUS_INT,
+	AU1000_USB_HOST_INT,
+	AU1000_ACSYNC_INT,
+	AU1100_MAC0_DMA_INT,
+	AU1100_GPIO_208_215,
+	AU1100_LCD_INT,
+	AU1000_AC97C_INT,
+	AU1000_GPIO_0,
+	AU1000_GPIO_1,
+	AU1000_GPIO_2,
+	AU1000_GPIO_3,
+	AU1000_GPIO_4,
+	AU1000_GPIO_5,
+	AU1000_GPIO_6,
+	AU1000_GPIO_7,
+	AU1000_GPIO_8,
+	AU1000_GPIO_9,
+	AU1000_GPIO_10,
+	AU1000_GPIO_11,
+	AU1000_GPIO_12,
+	AU1000_GPIO_13,
+	AU1000_GPIO_14,
+	AU1000_GPIO_15,
+	AU1000_GPIO_16,
+	AU1000_GPIO_17,
+	AU1000_GPIO_18,
+	AU1000_GPIO_19,
+	AU1000_GPIO_20,
+	AU1000_GPIO_21,
+	AU1000_GPIO_22,
+	AU1000_GPIO_23,
+	AU1000_GPIO_24,
+	AU1000_GPIO_25,
+	AU1000_GPIO_26,
+	AU1000_GPIO_27,
+	AU1000_GPIO_28,
+	AU1000_GPIO_29,
+	AU1000_GPIO_30,
+	AU1000_GPIO_31,
+};
+
+#define UART0_ADDR		0xB1100000
+#define UART1_ADDR		0xB1200000
+#define UART3_ADDR		0xB1400000
+
+#define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
+#define USB_HOST_CONFIG 	0xB017FFFC
+
+#define AU1100_ETH0_BASE	0xB0500000
+#define AU1100_MAC0_ENABLE	0xB0520000
+#define NUM_ETH_INTERFACES 1
+#endif /* CONFIG_SOC_AU1100 */
+
+#ifdef CONFIG_SOC_AU1550
+enum soc_au1550_ints {
+	AU1550_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
+	AU1550_UART0_INT	= AU1550_FIRST_INT,
+	AU1550_PCI_INTA,
+	AU1550_PCI_INTB,
+	AU1550_DDMA_INT,
+	AU1550_CRYPTO_INT,
+	AU1550_PCI_INTC,
+	AU1550_PCI_INTD,
+	AU1550_PCI_RST_INT,
+	AU1550_UART1_INT,
+	AU1550_UART3_INT,
+	AU1550_PSC0_INT,
+	AU1550_PSC1_INT,
+	AU1550_PSC2_INT,
+	AU1550_PSC3_INT,
+	AU1000_TOY_INT,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+
+	AU1550_NAND_INT			= AU1550_FIRST_INT + 23,
+	AU1550_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_REQ_INT		= AU1550_USB_DEV_REQ_INT,
+	AU1550_USB_DEV_SUS_INT,
+	AU1000_USB_DEV_SUS_INT		= AU1550_USB_DEV_SUS_INT,
+	AU1550_USB_HOST_INT,
+	AU1000_USB_HOST_INT		= AU1550_USB_HOST_INT,
+	AU1550_MAC0_DMA_INT,
+	AU1550_MAC1_DMA_INT,
+	AU1000_GPIO_0			= AU1550_FIRST_INT + 32,
+	AU1000_GPIO_1,
+	AU1000_GPIO_2,
+	AU1000_GPIO_3,
+	AU1000_GPIO_4,
+	AU1000_GPIO_5,
+	AU1000_GPIO_6,
+	AU1000_GPIO_7,
+	AU1000_GPIO_8,
+	AU1000_GPIO_9,
+	AU1000_GPIO_10,
+	AU1000_GPIO_11,
+	AU1000_GPIO_12,
+	AU1000_GPIO_13,
+	AU1000_GPIO_14,
+	AU1000_GPIO_15,
+	AU1550_GPIO_200,
+	AU1500_GPIO_201_205,			/* Logical or of GPIO201:205 */
+	AU1500_GPIO_16,
+	AU1500_GPIO_17,
+	AU1500_GPIO_20,
+	AU1500_GPIO_21,
+	AU1500_GPIO_22,
+	AU1500_GPIO_23,
+	AU1500_GPIO_24,
+	AU1500_GPIO_25,
+	AU1500_GPIO_26,
+	AU1500_GPIO_27,
+	AU1500_GPIO_28,
+	AU1500_GPIO_206,
+	AU1500_GPIO_207,
+	AU1500_GPIO_208_218,			/* Logical or of GPIO208:218 */
+};
+
+/* shortcuts */
+#define INTA AU1550_PCI_INTA
+#define INTB AU1550_PCI_INTB
+#define INTC AU1550_PCI_INTC
+#define INTD AU1550_PCI_INTD
+
+#define UART0_ADDR		0xB1100000
+#define UART1_ADDR		0xB1200000
+#define UART3_ADDR		0xB1400000
+
+#define USB_OHCI_BASE		0x14020000	/* phys addr for ioremap */
+#define USB_OHCI_LEN		0x00060000
+#define USB_HOST_CONFIG 	0xB4027ffc
+
+#define AU1550_ETH0_BASE	0xB0500000
+#define AU1550_ETH1_BASE	0xB0510000
+#define AU1550_MAC0_ENABLE	0xB0520000
+#define AU1550_MAC1_ENABLE	0xB0520004
+#define NUM_ETH_INTERFACES 2
+#endif /* CONFIG_SOC_AU1550 */
+
+#ifdef CONFIG_SOC_AU1200
+enum soc_au1200_ints {
+	AU1200_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
+	AU1200_UART0_INT	= AU1200_FIRST_INT,
+	AU1200_SWT_INT,
+	AU1200_SD_INT,
+	AU1200_DDMA_INT,
+	AU1200_MAE_BE_INT,
+	AU1200_GPIO_200,
+	AU1200_GPIO_201,
+	AU1200_GPIO_202,
+	AU1200_UART1_INT,
+	AU1200_MAE_FE_INT,
+	AU1200_PSC0_INT,
+	AU1200_PSC1_INT,
+	AU1200_AES_INT,
+	AU1200_CAMERA_INT,
+	AU1000_TOY_INT,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+
+	AU1200_NAND_INT		= AU1200_FIRST_INT + 23,
+	AU1200_GPIO_204,
+	AU1200_GPIO_205,
+	AU1200_GPIO_206,
+	AU1200_GPIO_207,
+	AU1200_GPIO_208_215,			/* Logical OR of 208:215 */
+	AU1200_USB_INT,
+	AU1000_USB_HOST_INT	= AU1200_USB_INT,
+	AU1200_LCD_INT,
+	AU1200_MAE_BOTH_INT,
+	AU1000_GPIO_0,
+	AU1000_GPIO_1,
+	AU1000_GPIO_2,
+	AU1000_GPIO_3,
+	AU1000_GPIO_4,
+	AU1000_GPIO_5,
+	AU1000_GPIO_6,
+	AU1000_GPIO_7,
+	AU1000_GPIO_8,
+	AU1000_GPIO_9,
+	AU1000_GPIO_10,
+	AU1000_GPIO_11,
+	AU1000_GPIO_12,
+	AU1000_GPIO_13,
+	AU1000_GPIO_14,
+	AU1000_GPIO_15,
+	AU1000_GPIO_16,
+	AU1000_GPIO_17,
+	AU1000_GPIO_18,
+	AU1000_GPIO_19,
+	AU1000_GPIO_20,
+	AU1000_GPIO_21,
+	AU1000_GPIO_22,
+	AU1000_GPIO_23,
+	AU1000_GPIO_24,
+	AU1000_GPIO_25,
+	AU1000_GPIO_26,
+	AU1000_GPIO_27,
+	AU1000_GPIO_28,
+	AU1000_GPIO_29,
+	AU1000_GPIO_30,
+	AU1000_GPIO_31,
+};
+
+#define UART0_ADDR		0xB1100000
+#define UART1_ADDR		0xB1200000
+
+#define USB_UOC_BASE		0x14020020
+#define USB_UOC_LEN		0x20
+#define USB_OHCI_BASE		0x14020100
+#define USB_OHCI_LEN		0x100
+#define USB_EHCI_BASE		0x14020200
+#define USB_EHCI_LEN		0x100
+#define USB_UDC_BASE		0x14022000
+#define USB_UDC_LEN		0x2000
+#define USB_MSR_BASE		0xB4020000
+#define USB_MSR_MCFG		4
+#define USBMSRMCFG_OMEMEN	0
+#define USBMSRMCFG_OBMEN	1
+#define USBMSRMCFG_EMEMEN	2
+#define USBMSRMCFG_EBMEN	3
+#define USBMSRMCFG_DMEMEN	4
+#define USBMSRMCFG_DBMEN	5
+#define USBMSRMCFG_GMEMEN	6
+#define USBMSRMCFG_OHCCLKEN	16
+#define USBMSRMCFG_EHCCLKEN	17
+#define USBMSRMCFG_UDCCLKEN	18
+#define USBMSRMCFG_PHYPLLEN	19
+#define USBMSRMCFG_RDCOMB	30
+#define USBMSRMCFG_PFEN 	31
+
+#endif /* CONFIG_SOC_AU1200 */
+
+#define AU1000_INTC0_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_BASE + 32)
+#define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
+
+#define AU1000_MAX_INTR 	AU1000_INTC1_INT_LAST
+#define INTX			0xFF			/* not valid */
+
+/* Programmable Counters 0 and 1 */
+#define SYS_BASE		0xB1900000
+#define SYS_COUNTER_CNTRL	(SYS_BASE + 0x14)
+#  define SYS_CNTRL_E1S 	(1 << 23)
+#  define SYS_CNTRL_T1S 	(1 << 20)
+#  define SYS_CNTRL_M21 	(1 << 19)
+#  define SYS_CNTRL_M11 	(1 << 18)
+#  define SYS_CNTRL_M01 	(1 << 17)
+#  define SYS_CNTRL_C1S 	(1 << 16)
+#  define SYS_CNTRL_BP		(1 << 14)
+#  define SYS_CNTRL_EN1 	(1 << 13)
+#  define SYS_CNTRL_BT1 	(1 << 12)
+#  define SYS_CNTRL_EN0 	(1 << 11)
+#  define SYS_CNTRL_BT0 	(1 << 10)
+#  define SYS_CNTRL_E0		(1 << 8)
+#  define SYS_CNTRL_E0S 	(1 << 7)
+#  define SYS_CNTRL_32S 	(1 << 5)
+#  define SYS_CNTRL_T0S 	(1 << 4)
+#  define SYS_CNTRL_M20 	(1 << 3)
+#  define SYS_CNTRL_M10 	(1 << 2)
+#  define SYS_CNTRL_M00 	(1 << 1)
+#  define SYS_CNTRL_C0S 	(1 << 0)
+
+/* Programmable Counter 0 Registers */
+#define SYS_TOYTRIM		(SYS_BASE + 0)
+#define SYS_TOYWRITE		(SYS_BASE + 4)
+#define SYS_TOYMATCH0		(SYS_BASE + 8)
+#define SYS_TOYMATCH1		(SYS_BASE + 0xC)
+#define SYS_TOYMATCH2		(SYS_BASE + 0x10)
+#define SYS_TOYREAD		(SYS_BASE + 0x40)
+
+/* Programmable Counter 1 Registers */
+#define SYS_RTCTRIM		(SYS_BASE + 0x44)
+#define SYS_RTCWRITE		(SYS_BASE + 0x48)
+#define SYS_RTCMATCH0		(SYS_BASE + 0x4C)
+#define SYS_RTCMATCH1		(SYS_BASE + 0x50)
+#define SYS_RTCMATCH2		(SYS_BASE + 0x54)
+#define SYS_RTCREAD		(SYS_BASE + 0x58)
+
+/* I2S Controller */
+#define I2S_DATA		0xB1000000
+#  define I2S_DATA_MASK 	0xffffff
+#define I2S_CONFIG		0xB1000004
+#  define I2S_CONFIG_XU 	(1 << 25)
+#  define I2S_CONFIG_XO 	(1 << 24)
+#  define I2S_CONFIG_RU 	(1 << 23)
+#  define I2S_CONFIG_RO 	(1 << 22)
+#  define I2S_CONFIG_TR 	(1 << 21)
+#  define I2S_CONFIG_TE 	(1 << 20)
+#  define I2S_CONFIG_TF 	(1 << 19)
+#  define I2S_CONFIG_RR 	(1 << 18)
+#  define I2S_CONFIG_RE 	(1 << 17)
+#  define I2S_CONFIG_RF 	(1 << 16)
+#  define I2S_CONFIG_PD 	(1 << 11)
+#  define I2S_CONFIG_LB 	(1 << 10)
+#  define I2S_CONFIG_IC 	(1 << 9)
+#  define I2S_CONFIG_FM_BIT	7
+#  define I2S_CONFIG_FM_MASK	(0x3 << I2S_CONFIG_FM_BIT)
+#    define I2S_CONFIG_FM_I2S	(0x0 << I2S_CONFIG_FM_BIT)
+#    define I2S_CONFIG_FM_LJ	(0x1 << I2S_CONFIG_FM_BIT)
+#    define I2S_CONFIG_FM_RJ	(0x2 << I2S_CONFIG_FM_BIT)
+#  define I2S_CONFIG_TN 	(1 << 6)
+#  define I2S_CONFIG_RN 	(1 << 5)
+#  define I2S_CONFIG_SZ_BIT	0
+#  define I2S_CONFIG_SZ_MASK	(0x1F << I2S_CONFIG_SZ_BIT)
+
+#define I2S_CONTROL		0xB1000008
+#  define I2S_CONTROL_D 	(1 << 1)
+#  define I2S_CONTROL_CE	(1 << 0)
+
+/* USB Host Controller */
+#ifndef USB_OHCI_LEN
+#define USB_OHCI_LEN		0x00100000
+#endif
+
+#ifndef CONFIG_SOC_AU1200
+
+/* USB Device Controller */
+#define USBD_EP0RD		0xB0200000
+#define USBD_EP0WR		0xB0200004
+#define USBD_EP2WR		0xB0200008
+#define USBD_EP3WR		0xB020000C
+#define USBD_EP4RD		0xB0200010
+#define USBD_EP5RD		0xB0200014
+#define USBD_INTEN		0xB0200018
+#define USBD_INTSTAT		0xB020001C
+#  define USBDEV_INT_SOF	(1 << 12)
+#  define USBDEV_INT_HF_BIT	6
+#  define USBDEV_INT_HF_MASK	(0x3f << USBDEV_INT_HF_BIT)
+#  define USBDEV_INT_CMPLT_BIT	0
+#  define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
+#define USBD_CONFIG		0xB0200020
+#define USBD_EP0CS		0xB0200024
+#define USBD_EP2CS		0xB0200028
+#define USBD_EP3CS		0xB020002C
+#define USBD_EP4CS		0xB0200030
+#define USBD_EP5CS		0xB0200034
+#  define USBDEV_CS_SU		(1 << 14)
+#  define USBDEV_CS_NAK 	(1 << 13)
+#  define USBDEV_CS_ACK 	(1 << 12)
+#  define USBDEV_CS_BUSY	(1 << 11)
+#  define USBDEV_CS_TSIZE_BIT	1
+#  define USBDEV_CS_TSIZE_MASK	(0x3ff << USBDEV_CS_TSIZE_BIT)
+#  define USBDEV_CS_STALL	(1 << 0)
+#define USBD_EP0RDSTAT		0xB0200040
+#define USBD_EP0WRSTAT		0xB0200044
+#define USBD_EP2WRSTAT		0xB0200048
+#define USBD_EP3WRSTAT		0xB020004C
+#define USBD_EP4RDSTAT		0xB0200050
+#define USBD_EP5RDSTAT		0xB0200054
+#  define USBDEV_FSTAT_FLUSH	(1 << 6)
+#  define USBDEV_FSTAT_UF	(1 << 5)
+#  define USBDEV_FSTAT_OF	(1 << 4)
+#  define USBDEV_FSTAT_FCNT_BIT 0
+#  define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
+#define USBD_ENABLE		0xB0200058
+#  define USBDEV_ENABLE 	(1 << 1)
+#  define USBDEV_CE		(1 << 0)
+
+#endif /* !CONFIG_SOC_AU1200 */
+
+/* Ethernet Controllers  */
+
+/* 4 byte offsets from AU1000_ETH_BASE */
+#define MAC_CONTROL		0x0
+#  define MAC_RX_ENABLE 	(1 << 2)
+#  define MAC_TX_ENABLE 	(1 << 3)
+#  define MAC_DEF_CHECK 	(1 << 5)
+#  define MAC_SET_BL(X) 	(((X) & 0x3) << 6)
+#  define MAC_AUTO_PAD		(1 << 8)
+#  define MAC_DISABLE_RETRY	(1 << 10)
+#  define MAC_DISABLE_BCAST	(1 << 11)
+#  define MAC_LATE_COL		(1 << 12)
+#  define MAC_HASH_MODE 	(1 << 13)
+#  define MAC_HASH_ONLY 	(1 << 15)
+#  define MAC_PASS_ALL		(1 << 16)
+#  define MAC_INVERSE_FILTER	(1 << 17)
+#  define MAC_PROMISCUOUS	(1 << 18)
+#  define MAC_PASS_ALL_MULTI	(1 << 19)
+#  define MAC_FULL_DUPLEX	(1 << 20)
+#  define MAC_NORMAL_MODE	0
+#  define MAC_INT_LOOPBACK	(1 << 21)
+#  define MAC_EXT_LOOPBACK	(1 << 22)
+#  define MAC_DISABLE_RX_OWN	(1 << 23)
+#  define MAC_BIG_ENDIAN	(1 << 30)
+#  define MAC_RX_ALL		(1 << 31)
+#define MAC_ADDRESS_HIGH	0x4
+#define MAC_ADDRESS_LOW		0x8
+#define MAC_MCAST_HIGH		0xC
+#define MAC_MCAST_LOW		0x10
+#define MAC_MII_CNTRL		0x14
+#  define MAC_MII_BUSY		(1 << 0)
+#  define MAC_MII_READ		0
+#  define MAC_MII_WRITE		(1 << 1)
+#  define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
+#  define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
+#define MAC_MII_DATA		0x18
+#define MAC_FLOW_CNTRL		0x1C
+#  define MAC_FLOW_CNTRL_BUSY	(1 << 0)
+#  define MAC_FLOW_CNTRL_ENABLE (1 << 1)
+#  define MAC_PASS_CONTROL	(1 << 2)
+#  define MAC_SET_PAUSE(X)	(((X) & 0xffff) << 16)
+#define MAC_VLAN1_TAG		0x20
+#define MAC_VLAN2_TAG		0x24
+
+/* Ethernet Controller Enable */
+
+#  define MAC_EN_CLOCK_ENABLE	(1 << 0)
+#  define MAC_EN_RESET0		(1 << 1)
+#  define MAC_EN_TOSS		(0 << 2)
+#  define MAC_EN_CACHEABLE	(1 << 3)
+#  define MAC_EN_RESET1 	(1 << 4)
+#  define MAC_EN_RESET2 	(1 << 5)
+#  define MAC_DMA_RESET 	(1 << 6)
+
+/* Ethernet Controller DMA Channels */
+
+#define MAC0_TX_DMA_ADDR	0xB4004000
+#define MAC1_TX_DMA_ADDR	0xB4004200
+/* offsets from MAC_TX_RING_ADDR address */
+#define MAC_TX_BUFF0_STATUS	0x0
+#  define TX_FRAME_ABORTED	(1 << 0)
+#  define TX_JAB_TIMEOUT	(1 << 1)
+#  define TX_NO_CARRIER 	(1 << 2)
+#  define TX_LOSS_CARRIER	(1 << 3)
+#  define TX_EXC_DEF		(1 << 4)
+#  define TX_LATE_COLL_ABORT	(1 << 5)
+#  define TX_EXC_COLL		(1 << 6)
+#  define TX_UNDERRUN		(1 << 7)
+#  define TX_DEFERRED		(1 << 8)
+#  define TX_LATE_COLL		(1 << 9)
+#  define TX_COLL_CNT_MASK	(0xF << 10)
+#  define TX_PKT_RETRY		(1 << 31)
+#define MAC_TX_BUFF0_ADDR	0x4
+#  define TX_DMA_ENABLE 	(1 << 0)
+#  define TX_T_DONE		(1 << 1)
+#  define TX_GET_DMA_BUFFER(X)	(((X) >> 2) & 0x3)
+#define MAC_TX_BUFF0_LEN	0x8
+#define MAC_TX_BUFF1_STATUS	0x10
+#define MAC_TX_BUFF1_ADDR	0x14
+#define MAC_TX_BUFF1_LEN	0x18
+#define MAC_TX_BUFF2_STATUS	0x20
+#define MAC_TX_BUFF2_ADDR	0x24
+#define MAC_TX_BUFF2_LEN	0x28
+#define MAC_TX_BUFF3_STATUS	0x30
+#define MAC_TX_BUFF3_ADDR	0x34
+#define MAC_TX_BUFF3_LEN	0x38
+
+#define MAC0_RX_DMA_ADDR	0xB4004100
+#define MAC1_RX_DMA_ADDR	0xB4004300
+/* offsets from MAC_RX_RING_ADDR */
+#define MAC_RX_BUFF0_STATUS	0x0
+#  define RX_FRAME_LEN_MASK	0x3fff
+#  define RX_WDOG_TIMER 	(1 << 14)
+#  define RX_RUNT		(1 << 15)
+#  define RX_OVERLEN		(1 << 16)
+#  define RX_COLL		(1 << 17)
+#  define RX_ETHER		(1 << 18)
+#  define RX_MII_ERROR		(1 << 19)
+#  define RX_DRIBBLING		(1 << 20)
+#  define RX_CRC_ERROR		(1 << 21)
+#  define RX_VLAN1		(1 << 22)
+#  define RX_VLAN2		(1 << 23)
+#  define RX_LEN_ERROR		(1 << 24)
+#  define RX_CNTRL_FRAME	(1 << 25)
+#  define RX_U_CNTRL_FRAME	(1 << 26)
+#  define RX_MCAST_FRAME	(1 << 27)
+#  define RX_BCAST_FRAME	(1 << 28)
+#  define RX_FILTER_FAIL	(1 << 29)
+#  define RX_PACKET_FILTER	(1 << 30)
+#  define RX_MISSED_FRAME	(1 << 31)
+
+#  define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN |  \
+		    RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
+		    RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
+#define MAC_RX_BUFF0_ADDR	0x4
+#  define RX_DMA_ENABLE 	(1 << 0)
+#  define RX_T_DONE		(1 << 1)
+#  define RX_GET_DMA_BUFFER(X)	(((X) >> 2) & 0x3)
+#  define RX_SET_BUFF_ADDR(X)	((X) & 0xffffffc0)
+#define MAC_RX_BUFF1_STATUS	0x10
+#define MAC_RX_BUFF1_ADDR	0x14
+#define MAC_RX_BUFF2_STATUS	0x20
+#define MAC_RX_BUFF2_ADDR	0x24
+#define MAC_RX_BUFF3_STATUS	0x30
+#define MAC_RX_BUFF3_ADDR	0x34
+
+/* UARTS 0-3 */
+#define UART_BASE		UART0_ADDR
+#ifdef	CONFIG_SOC_AU1200
+#define UART_DEBUG_BASE 	UART1_ADDR
+#else
+#define UART_DEBUG_BASE 	UART3_ADDR
+#endif
+
+#define UART_RX		0	/* Receive buffer */
+#define UART_TX		4	/* Transmit buffer */
+#define UART_IER	8	/* Interrupt Enable Register */
+#define UART_IIR	0xC	/* Interrupt ID Register */
+#define UART_FCR	0x10	/* FIFO Control Register */
+#define UART_LCR	0x14	/* Line Control Register */
+#define UART_MCR	0x18	/* Modem Control Register */
+#define UART_LSR	0x1C	/* Line Status Register */
+#define UART_MSR	0x20	/* Modem Status Register */
+#define UART_CLK	0x28	/* Baud Rate Clock Divider */
+#define UART_MOD_CNTRL	0x100	/* Module Control */
+
+#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
+#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
+#define UART_FCR_TRIGGER_MASK	0xF0 /* Mask for the FIFO trigger range */
+#define UART_FCR_R_TRIGGER_1	0x00 /* Mask for receive trigger set at 1 */
+#define UART_FCR_R_TRIGGER_4	0x40 /* Mask for receive trigger set at 4 */
+#define UART_FCR_R_TRIGGER_8	0x80 /* Mask for receive trigger set at 8 */
+#define UART_FCR_R_TRIGGER_14   0xA0 /* Mask for receive trigger set at 14 */
+#define UART_FCR_T_TRIGGER_0	0x00 /* Mask for transmit trigger set at 0 */
+#define UART_FCR_T_TRIGGER_4	0x10 /* Mask for transmit trigger set at 4 */
+#define UART_FCR_T_TRIGGER_8    0x20 /* Mask for transmit trigger set at 8 */
+#define UART_FCR_T_TRIGGER_12	0x30 /* Mask for transmit trigger set at 12 */
+
+/*
+ * These are the definitions for the Line Control Register
+ */
+#define UART_LCR_SBC	0x40	/* Set break control */
+#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
+#define UART_LCR_EPAR	0x10	/* Even parity select */
+#define UART_LCR_PARITY	0x08	/* Parity Enable */
+#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
+#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
+#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
+#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
+#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
+
+/*
+ * These are the definitions for the Line Status Register
+ */
+#define UART_LSR_TEMT	0x40	/* Transmitter empty */
+#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
+#define UART_LSR_BI	0x10	/* Break interrupt indicator */
+#define UART_LSR_FE	0x08	/* Frame error indicator */
+#define UART_LSR_PE	0x04	/* Parity error indicator */
+#define UART_LSR_OE	0x02	/* Overrun error indicator */
+#define UART_LSR_DR	0x01	/* Receiver data ready */
+
+/*
+ * These are the definitions for the Interrupt Identification Register
+ */
+#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
+#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
+#define UART_IIR_MSI	0x00	/* Modem status interrupt */
+#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
+#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
+#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
+
+/*
+ * These are the definitions for the Interrupt Enable Register
+ */
+#define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
+#define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
+#define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
+#define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
+
+/*
+ * These are the definitions for the Modem Control Register
+ */
+#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
+#define UART_MCR_OUT2	0x08	/* Out2 complement */
+#define UART_MCR_OUT1	0x04	/* Out1 complement */
+#define UART_MCR_RTS	0x02	/* RTS complement */
+#define UART_MCR_DTR	0x01	/* DTR complement */
+
+/*
+ * These are the definitions for the Modem Status Register
+ */
+#define UART_MSR_DCD	0x80	/* Data Carrier Detect */
+#define UART_MSR_RI	0x40	/* Ring Indicator */
+#define UART_MSR_DSR	0x20	/* Data Set Ready */
+#define UART_MSR_CTS	0x10	/* Clear to Send */
+#define UART_MSR_DDCD	0x08	/* Delta DCD */
+#define UART_MSR_TERI	0x04	/* Trailing edge ring indicator */
+#define UART_MSR_DDSR	0x02	/* Delta DSR */
+#define UART_MSR_DCTS	0x01	/* Delta CTS */
+#define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
+
+/* SSIO */
+#define SSI0_STATUS		0xB1600000
+#  define SSI_STATUS_BF 	(1 << 4)
+#  define SSI_STATUS_OF 	(1 << 3)
+#  define SSI_STATUS_UF 	(1 << 2)
+#  define SSI_STATUS_D		(1 << 1)
+#  define SSI_STATUS_B		(1 << 0)
+#define SSI0_INT		0xB1600004
+#  define SSI_INT_OI		(1 << 3)
+#  define SSI_INT_UI		(1 << 2)
+#  define SSI_INT_DI		(1 << 1)
+#define SSI0_INT_ENABLE 	0xB1600008
+#  define SSI_INTE_OIE		(1 << 3)
+#  define SSI_INTE_UIE		(1 << 2)
+#  define SSI_INTE_DIE		(1 << 1)
+#define SSI0_CONFIG		0xB1600020
+#  define SSI_CONFIG_AO 	(1 << 24)
+#  define SSI_CONFIG_DO 	(1 << 23)
+#  define SSI_CONFIG_ALEN_BIT	20
+#  define SSI_CONFIG_ALEN_MASK	(0x7 << 20)
+#  define SSI_CONFIG_DLEN_BIT	16
+#  define SSI_CONFIG_DLEN_MASK	(0x7 << 16)
+#  define SSI_CONFIG_DD 	(1 << 11)
+#  define SSI_CONFIG_AD 	(1 << 10)
+#  define SSI_CONFIG_BM_BIT	8
+#  define SSI_CONFIG_BM_MASK	(0x3 << 8)
+#  define SSI_CONFIG_CE 	(1 << 7)
+#  define SSI_CONFIG_DP 	(1 << 6)
+#  define SSI_CONFIG_DL 	(1 << 5)
+#  define SSI_CONFIG_EP 	(1 << 4)
+#define SSI0_ADATA		0xB1600024
+#  define SSI_AD_D		(1 << 24)
+#  define SSI_AD_ADDR_BIT	16
+#  define SSI_AD_ADDR_MASK	(0xff << 16)
+#  define SSI_AD_DATA_BIT	0
+#  define SSI_AD_DATA_MASK	(0xfff << 0)
+#define SSI0_CLKDIV		0xB1600028
+#define SSI0_CONTROL		0xB1600100
+#  define SSI_CONTROL_CD	(1 << 1)
+#  define SSI_CONTROL_E 	(1 << 0)
+
+/* SSI1 */
+#define SSI1_STATUS		0xB1680000
+#define SSI1_INT		0xB1680004
+#define SSI1_INT_ENABLE 	0xB1680008
+#define SSI1_CONFIG		0xB1680020
+#define SSI1_ADATA		0xB1680024
+#define SSI1_CLKDIV		0xB1680028
+#define SSI1_ENABLE		0xB1680100
+
+/*
+ * Register content definitions
+ */
+#define SSI_STATUS_BF		(1 << 4)
+#define SSI_STATUS_OF		(1 << 3)
+#define SSI_STATUS_UF		(1 << 2)
+#define SSI_STATUS_D		(1 << 1)
+#define SSI_STATUS_B		(1 << 0)
+
+/* SSI_INT */
+#define SSI_INT_OI		(1 << 3)
+#define SSI_INT_UI		(1 << 2)
+#define SSI_INT_DI		(1 << 1)
+
+/* SSI_INTEN */
+#define SSI_INTEN_OIE		(1 << 3)
+#define SSI_INTEN_UIE		(1 << 2)
+#define SSI_INTEN_DIE		(1 << 1)
+
+#define SSI_CONFIG_AO		(1 << 24)
+#define SSI_CONFIG_DO		(1 << 23)
+#define SSI_CONFIG_ALEN 	(7 << 20)
+#define SSI_CONFIG_DLEN 	(15 << 16)
+#define SSI_CONFIG_DD		(1 << 11)
+#define SSI_CONFIG_AD		(1 << 10)
+#define SSI_CONFIG_BM		(3 << 8)
+#define SSI_CONFIG_CE		(1 << 7)
+#define SSI_CONFIG_DP		(1 << 6)
+#define SSI_CONFIG_DL		(1 << 5)
+#define SSI_CONFIG_EP		(1 << 4)
+#define SSI_CONFIG_ALEN_N(N)	((N-1) << 20)
+#define SSI_CONFIG_DLEN_N(N)	((N-1) << 16)
+#define SSI_CONFIG_BM_HI	(0 << 8)
+#define SSI_CONFIG_BM_LO	(1 << 8)
+#define SSI_CONFIG_BM_CY	(2 << 8)
+
+#define SSI_ADATA_D		(1 << 24)
+#define SSI_ADATA_ADDR		(0xFF << 16)
+#define SSI_ADATA_DATA		0x0FFF
+#define SSI_ADATA_ADDR_N(N)	(N << 16)
+
+#define SSI_ENABLE_CD		(1 << 1)
+#define SSI_ENABLE_E		(1 << 0)
+
+/* IrDA Controller */
+#define IRDA_BASE		0xB0300000
+#define IR_RING_PTR_STATUS	(IRDA_BASE + 0x00)
+#define IR_RING_BASE_ADDR_H	(IRDA_BASE + 0x04)
+#define IR_RING_BASE_ADDR_L	(IRDA_BASE + 0x08)
+#define IR_RING_SIZE		(IRDA_BASE + 0x0C)
+#define IR_RING_PROMPT		(IRDA_BASE + 0x10)
+#define IR_RING_ADDR_CMPR	(IRDA_BASE + 0x14)
+#define IR_INT_CLEAR		(IRDA_BASE + 0x18)
+#define IR_CONFIG_1		(IRDA_BASE + 0x20)
+#  define IR_RX_INVERT_LED	(1 << 0)
+#  define IR_TX_INVERT_LED	(1 << 1)
+#  define IR_ST 		(1 << 2)
+#  define IR_SF 		(1 << 3)
+#  define IR_SIR		(1 << 4)
+#  define IR_MIR		(1 << 5)
+#  define IR_FIR		(1 << 6)
+#  define IR_16CRC		(1 << 7)
+#  define IR_TD 		(1 << 8)
+#  define IR_RX_ALL		(1 << 9)
+#  define IR_DMA_ENABLE 	(1 << 10)
+#  define IR_RX_ENABLE		(1 << 11)
+#  define IR_TX_ENABLE		(1 << 12)
+#  define IR_LOOPBACK		(1 << 14)
+#  define IR_SIR_MODE		(IR_SIR | IR_DMA_ENABLE | \
+				 IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
+#define IR_SIR_FLAGS		(IRDA_BASE + 0x24)
+#define IR_ENABLE		(IRDA_BASE + 0x28)
+#  define IR_RX_STATUS		(1 << 9)
+#  define IR_TX_STATUS		(1 << 10)
+#define IR_READ_PHY_CONFIG	(IRDA_BASE + 0x2C)
+#define IR_WRITE_PHY_CONFIG	(IRDA_BASE + 0x30)
+#define IR_MAX_PKT_LEN		(IRDA_BASE + 0x34)
+#define IR_RX_BYTE_CNT		(IRDA_BASE + 0x38)
+#define IR_CONFIG_2		(IRDA_BASE + 0x3C)
+#  define IR_MODE_INV		(1 << 0)
+#  define IR_ONE_PIN		(1 << 1)
+#define IR_INTERFACE_CONFIG	(IRDA_BASE + 0x40)
+
+/* GPIO */
+#define SYS_PINFUNC		0xB190002C
+#  define SYS_PF_USB		(1 << 15)	/* 2nd USB device/host */
+#  define SYS_PF_U3		(1 << 14)	/* GPIO23/U3TXD */
+#  define SYS_PF_U2		(1 << 13)	/* GPIO22/U2TXD */
+#  define SYS_PF_U1		(1 << 12)	/* GPIO21/U1TXD */
+#  define SYS_PF_SRC		(1 << 11)	/* GPIO6/SROMCKE */
+#  define SYS_PF_CK5		(1 << 10)	/* GPIO3/CLK5 */
+#  define SYS_PF_CK4		(1 << 9)	/* GPIO2/CLK4 */
+#  define SYS_PF_IRF		(1 << 8)	/* GPIO15/IRFIRSEL */
+#  define SYS_PF_UR3		(1 << 7)	/* GPIO[14:9]/UART3 */
+#  define SYS_PF_I2D		(1 << 6)	/* GPIO8/I2SDI */
+#  define SYS_PF_I2S		(1 << 5)	/* I2S/GPIO[29:31] */
+#  define SYS_PF_NI2		(1 << 4)	/* NI2/GPIO[24:28] */
+#  define SYS_PF_U0		(1 << 3)	/* U0TXD/GPIO20 */
+#  define SYS_PF_RD		(1 << 2)	/* IRTXD/GPIO19 */
+#  define SYS_PF_A97		(1 << 1)	/* AC97/SSL1 */
+#  define SYS_PF_S0		(1 << 0)	/* SSI_0/GPIO[16:18] */
+
+/* Au1100 only */
+#  define SYS_PF_PC		(1 << 18)	/* PCMCIA/GPIO[207:204] */
+#  define SYS_PF_LCD		(1 << 17)	/* extern lcd/GPIO[203:200] */
+#  define SYS_PF_CS		(1 << 16)	/* EXTCLK0/32KHz to gpio2 */
+#  define SYS_PF_EX0		(1 << 9)	/* GPIO2/clock */
+
+/* Au1550 only.  Redefines lots of pins */
+#  define SYS_PF_PSC2_MASK	(7 << 17)
+#  define SYS_PF_PSC2_AC97	0
+#  define SYS_PF_PSC2_SPI	0
+#  define SYS_PF_PSC2_I2S	(1 << 17)
+#  define SYS_PF_PSC2_SMBUS	(3 << 17)
+#  define SYS_PF_PSC2_GPIO	(7 << 17)
+#  define SYS_PF_PSC3_MASK	(7 << 20)
+#  define SYS_PF_PSC3_AC97	0
+#  define SYS_PF_PSC3_SPI	0
+#  define SYS_PF_PSC3_I2S	(1 << 20)
+#  define SYS_PF_PSC3_SMBUS	(3 << 20)
+#  define SYS_PF_PSC3_GPIO	(7 << 20)
+#  define SYS_PF_PSC1_S1	(1 << 1)
+#  define SYS_PF_MUST_BE_SET	((1 << 5) | (1 << 2))
+
+/* Au1200 only */
+#ifdef CONFIG_SOC_AU1200
+#define SYS_PINFUNC_DMA 	(1 << 31)
+#define SYS_PINFUNC_S0A 	(1 << 30)
+#define SYS_PINFUNC_S1A 	(1 << 29)
+#define SYS_PINFUNC_LP0 	(1 << 28)
+#define SYS_PINFUNC_LP1 	(1 << 27)
+#define SYS_PINFUNC_LD16 	(1 << 26)
+#define SYS_PINFUNC_LD8 	(1 << 25)
+#define SYS_PINFUNC_LD1 	(1 << 24)
+#define SYS_PINFUNC_LD0 	(1 << 23)
+#define SYS_PINFUNC_P1A 	(3 << 21)
+#define SYS_PINFUNC_P1B 	(1 << 20)
+#define SYS_PINFUNC_FS3 	(1 << 19)
+#define SYS_PINFUNC_P0A 	(3 << 17)
+#define SYS_PINFUNC_CS		(1 << 16)
+#define SYS_PINFUNC_CIM 	(1 << 15)
+#define SYS_PINFUNC_P1C 	(1 << 14)
+#define SYS_PINFUNC_U1T 	(1 << 12)
+#define SYS_PINFUNC_U1R 	(1 << 11)
+#define SYS_PINFUNC_EX1 	(1 << 10)
+#define SYS_PINFUNC_EX0 	(1 << 9)
+#define SYS_PINFUNC_U0R 	(1 << 8)
+#define SYS_PINFUNC_MC		(1 << 7)
+#define SYS_PINFUNC_S0B 	(1 << 6)
+#define SYS_PINFUNC_S0C 	(1 << 5)
+#define SYS_PINFUNC_P0B 	(1 << 4)
+#define SYS_PINFUNC_U0T 	(1 << 3)
+#define SYS_PINFUNC_S1B 	(1 << 2)
+#endif
+
+#define SYS_TRIOUTRD		0xB1900100
+#define SYS_TRIOUTCLR		0xB1900100
+#define SYS_OUTPUTRD		0xB1900108
+#define SYS_OUTPUTSET		0xB1900108
+#define SYS_OUTPUTCLR		0xB190010C
+#define SYS_PINSTATERD		0xB1900110
+#define SYS_PININPUTEN		0xB1900110
+
+/* GPIO2, Au1500, Au1550 only */
+#define GPIO2_BASE		0xB1700000
+#define GPIO2_DIR		(GPIO2_BASE + 0)
+#define GPIO2_OUTPUT		(GPIO2_BASE + 8)
+#define GPIO2_PINSTATE		(GPIO2_BASE + 0xC)
+#define GPIO2_INTENABLE 	(GPIO2_BASE + 0x10)
+#define GPIO2_ENABLE		(GPIO2_BASE + 0x14)
+
+/* Power Management */
+#define SYS_SCRATCH0		0xB1900018
+#define SYS_SCRATCH1		0xB190001C
+#define SYS_WAKEMSK		0xB1900034
+#define SYS_ENDIAN		0xB1900038
+#define SYS_POWERCTRL		0xB190003C
+#define SYS_WAKESRC		0xB190005C
+#define SYS_SLPPWR		0xB1900078
+#define SYS_SLEEP		0xB190007C
+
+/* Clock Controller */
+#define SYS_FREQCTRL0		0xB1900020
+#  define SYS_FC_FRDIV2_BIT	22
+#  define SYS_FC_FRDIV2_MASK	(0xff << SYS_FC_FRDIV2_BIT)
+#  define SYS_FC_FE2		(1 << 21)
+#  define SYS_FC_FS2		(1 << 20)
+#  define SYS_FC_FRDIV1_BIT	12
+#  define SYS_FC_FRDIV1_MASK	(0xff << SYS_FC_FRDIV1_BIT)
+#  define SYS_FC_FE1		(1 << 11)
+#  define SYS_FC_FS1		(1 << 10)
+#  define SYS_FC_FRDIV0_BIT	2
+#  define SYS_FC_FRDIV0_MASK	(0xff << SYS_FC_FRDIV0_BIT)
+#  define SYS_FC_FE0		(1 << 1)
+#  define SYS_FC_FS0		(1 << 0)
+#define SYS_FREQCTRL1		0xB1900024
+#  define SYS_FC_FRDIV5_BIT	22
+#  define SYS_FC_FRDIV5_MASK	(0xff << SYS_FC_FRDIV5_BIT)
+#  define SYS_FC_FE5		(1 << 21)
+#  define SYS_FC_FS5		(1 << 20)
+#  define SYS_FC_FRDIV4_BIT	12
+#  define SYS_FC_FRDIV4_MASK	(0xff << SYS_FC_FRDIV4_BIT)
+#  define SYS_FC_FE4		(1 << 11)
+#  define SYS_FC_FS4		(1 << 10)
+#  define SYS_FC_FRDIV3_BIT	2
+#  define SYS_FC_FRDIV3_MASK	(0xff << SYS_FC_FRDIV3_BIT)
+#  define SYS_FC_FE3		(1 << 1)
+#  define SYS_FC_FS3		(1 << 0)
+#define SYS_CLKSRC		0xB1900028
+#  define SYS_CS_ME1_BIT	27
+#  define SYS_CS_ME1_MASK	(0x7 << SYS_CS_ME1_BIT)
+#  define SYS_CS_DE1		(1 << 26)
+#  define SYS_CS_CE1		(1 << 25)
+#  define SYS_CS_ME0_BIT	22
+#  define SYS_CS_ME0_MASK	(0x7 << SYS_CS_ME0_BIT)
+#  define SYS_CS_DE0		(1 << 21)
+#  define SYS_CS_CE0		(1 << 20)
+#  define SYS_CS_MI2_BIT	17
+#  define SYS_CS_MI2_MASK	(0x7 << SYS_CS_MI2_BIT)
+#  define SYS_CS_DI2		(1 << 16)
+#  define SYS_CS_CI2		(1 << 15)
+#ifdef CONFIG_SOC_AU1100
+#  define SYS_CS_ML_BIT 	7
+#  define SYS_CS_ML_MASK	(0x7 << SYS_CS_ML_BIT)
+#  define SYS_CS_DL		(1 << 6)
+#  define SYS_CS_CL		(1 << 5)
+#else
+#  define SYS_CS_MUH_BIT	12
+#  define SYS_CS_MUH_MASK	(0x7 << SYS_CS_MUH_BIT)
+#  define SYS_CS_DUH		(1 << 11)
+#  define SYS_CS_CUH		(1 << 10)
+#  define SYS_CS_MUD_BIT	7
+#  define SYS_CS_MUD_MASK	(0x7 << SYS_CS_MUD_BIT)
+#  define SYS_CS_DUD		(1 << 6)
+#  define SYS_CS_CUD		(1 << 5)
+#endif
+#  define SYS_CS_MIR_BIT	2
+#  define SYS_CS_MIR_MASK	(0x7 << SYS_CS_MIR_BIT)
+#  define SYS_CS_DIR		(1 << 1)
+#  define SYS_CS_CIR		(1 << 0)
+
+#  define SYS_CS_MUX_AUX	0x1
+#  define SYS_CS_MUX_FQ0	0x2
+#  define SYS_CS_MUX_FQ1	0x3
+#  define SYS_CS_MUX_FQ2	0x4
+#  define SYS_CS_MUX_FQ3	0x5
+#  define SYS_CS_MUX_FQ4	0x6
+#  define SYS_CS_MUX_FQ5	0x7
+#define SYS_CPUPLL		0xB1900060
+#define SYS_AUXPLL		0xB1900064
+
+/* AC97 Controller */
+#define AC97C_CONFIG		0xB0000000
+#  define AC97C_RECV_SLOTS_BIT	13
+#  define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT)
+#  define AC97C_XMIT_SLOTS_BIT	3
+#  define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT)
+#  define AC97C_SG		(1 << 2)
+#  define AC97C_SYNC		(1 << 1)
+#  define AC97C_RESET		(1 << 0)
+#define AC97C_STATUS		0xB0000004
+#  define AC97C_XU		(1 << 11)
+#  define AC97C_XO		(1 << 10)
+#  define AC97C_RU		(1 << 9)
+#  define AC97C_RO		(1 << 8)
+#  define AC97C_READY		(1 << 7)
+#  define AC97C_CP		(1 << 6)
+#  define AC97C_TR		(1 << 5)
+#  define AC97C_TE		(1 << 4)
+#  define AC97C_TF		(1 << 3)
+#  define AC97C_RR		(1 << 2)
+#  define AC97C_RE		(1 << 1)
+#  define AC97C_RF		(1 << 0)
+#define AC97C_DATA		0xB0000008
+#define AC97C_CMD		0xB000000C
+#  define AC97C_WD_BIT		16
+#  define AC97C_READ		(1 << 7)
+#  define AC97C_INDEX_MASK	0x7f
+#define AC97C_CNTRL		0xB0000010
+#  define AC97C_RS		(1 << 1)
+#  define AC97C_CE		(1 << 0)
+
+/* Secure Digital (SD) Controller */
+#define SD0_XMIT_FIFO	0xB0600000
+#define SD0_RECV_FIFO	0xB0600004
+#define SD1_XMIT_FIFO	0xB0680000
+#define SD1_RECV_FIFO	0xB0680004
+
+#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
+/* Au1500 PCI Controller */
+#define Au1500_CFG_BASE 	0xB4005000	/* virtual, KSEG1 addr */
+#define Au1500_PCI_CMEM 	(Au1500_CFG_BASE + 0)
+#define Au1500_PCI_CFG		(Au1500_CFG_BASE + 4)
+#  define PCI_ERROR		((1 << 22) | (1 << 23) | (1 << 24) | \
+				 (1 << 25) | (1 << 26) | (1 << 27))
+#define Au1500_PCI_B2BMASK_CCH	(Au1500_CFG_BASE + 8)
+#define Au1500_PCI_B2B0_VID	(Au1500_CFG_BASE + 0xC)
+#define Au1500_PCI_B2B1_ID	(Au1500_CFG_BASE + 0x10)
+#define Au1500_PCI_MWMASK_DEV	(Au1500_CFG_BASE + 0x14)
+#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
+#define Au1500_PCI_ERR_ADDR	(Au1500_CFG_BASE + 0x1C)
+#define Au1500_PCI_SPEC_INTACK	(Au1500_CFG_BASE + 0x20)
+#define Au1500_PCI_ID		(Au1500_CFG_BASE + 0x100)
+#define Au1500_PCI_STATCMD	(Au1500_CFG_BASE + 0x104)
+#define Au1500_PCI_CLASSREV	(Au1500_CFG_BASE + 0x108)
+#define Au1500_PCI_HDRTYPE	(Au1500_CFG_BASE + 0x10C)
+#define Au1500_PCI_MBAR 	(Au1500_CFG_BASE + 0x110)
+
+#define Au1500_PCI_HDR		0xB4005100	/* virtual, KSEG1 addr */
+
+/*
+ * All of our structures, like PCI resource, have 32-bit members.
+ * Drivers are expected to do an ioremap on the PCI MEM resource, but it's
+ * hard to store 0x4 0000 0000 in a 32-bit type.  We require a small patch
+ * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
+ * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM
+ * addresses.  For PCI I/O, it's simpler because we get to do the ioremap
+ * ourselves and then adjust the device's resources.
+ */
+#define Au1500_EXT_CFG		0x600000000ULL
+#define Au1500_EXT_CFG_TYPE1	0x680000000ULL
+#define Au1500_PCI_IO_START	0x500000000ULL
+#define Au1500_PCI_IO_END	0x5000FFFFFULL
+#define Au1500_PCI_MEM_START	0x440000000ULL
+#define Au1500_PCI_MEM_END	0x44FFFFFFFULL
+
+#define PCI_IO_START	0x00001000
+#define PCI_IO_END	0x000FFFFF
+#define PCI_MEM_START	0x40000000
+#define PCI_MEM_END	0x4FFFFFFF
+
+#define PCI_FIRST_DEVFN (0 << 3)
+#define PCI_LAST_DEVFN	(19 << 3)
+
+#define IOPORT_RESOURCE_START	0x00001000	/* skip legacy probing */
+#define IOPORT_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_START	0x10000000
+#define IOMEM_RESOURCE_END	0xffffffff
+
+#else /* Au1000 and Au1100 and Au1200 */
+
+/* Don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START	0x10000000
+#define IOPORT_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_START	0x10000000
+#define IOMEM_RESOURCE_END	0xffffffff
+
+#define PCI_IO_START	0
+#define PCI_IO_END	0
+#define PCI_MEM_START	0
+#define PCI_MEM_END	0
+#define PCI_FIRST_DEVFN 0
+#define PCI_LAST_DEVFN	0
+
+#endif
+
+#ifndef _LANGUAGE_ASSEMBLY
+typedef volatile struct {
+	/* 0x0000 */ u32 toytrim;
+	/* 0x0004 */ u32 toywrite;
+	/* 0x0008 */ u32 toymatch0;
+	/* 0x000C */ u32 toymatch1;
+	/* 0x0010 */ u32 toymatch2;
+	/* 0x0014 */ u32 cntrctrl;
+	/* 0x0018 */ u32 scratch0;
+	/* 0x001C */ u32 scratch1;
+	/* 0x0020 */ u32 freqctrl0;
+	/* 0x0024 */ u32 freqctrl1;
+	/* 0x0028 */ u32 clksrc;
+	/* 0x002C */ u32 pinfunc;
+	/* 0x0030 */ u32 reserved0;
+	/* 0x0034 */ u32 wakemsk;
+	/* 0x0038 */ u32 endian;
+	/* 0x003C */ u32 powerctrl;
+	/* 0x0040 */ u32 toyread;
+	/* 0x0044 */ u32 rtctrim;
+	/* 0x0048 */ u32 rtcwrite;
+	/* 0x004C */ u32 rtcmatch0;
+	/* 0x0050 */ u32 rtcmatch1;
+	/* 0x0054 */ u32 rtcmatch2;
+	/* 0x0058 */ u32 rtcread;
+	/* 0x005C */ u32 wakesrc;
+	/* 0x0060 */ u32 cpupll;
+	/* 0x0064 */ u32 auxpll;
+	/* 0x0068 */ u32 reserved1;
+	/* 0x006C */ u32 reserved2;
+	/* 0x0070 */ u32 reserved3;
+	/* 0x0074 */ u32 reserved4;
+	/* 0x0078 */ u32 slppwr;
+	/* 0x007C */ u32 sleep;
+	/* 0x0080 */ u32 reserved5[32];
+	/* 0x0100 */ u32 trioutrd;
+#define trioutclr trioutrd
+	/* 0x0104 */ u32 reserved6;
+	/* 0x0108 */ u32 outputrd;
+#define outputset outputrd
+	/* 0x010C */ u32 outputclr;
+	/* 0x0110 */ u32 pinstaterd;
+#define pininputen pinstaterd
+} AU1X00_SYS;
+
+static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE;
+
+#endif
+
+/*
+ * Processor information based on PRID.
+ * Copied from PowerPC.
+ */
+#ifndef _LANGUAGE_ASSEMBLY
+struct cpu_spec {
+	/* CPU is matched via (PRID & prid_mask) == prid_value */
+	unsigned int	prid_mask;
+	unsigned int	prid_value;
+
+	char		*cpu_name;
+	unsigned char	cpu_od;		/* Set Config[OD] */
+	unsigned char	cpu_bclk;	/* Enable BCLK switching */
+	unsigned char	cpu_pll_wo;	/* sys_cpupll reg. write-only */
+};
+
+extern struct cpu_spec	cpu_specs[];
+extern struct cpu_spec	*cur_cpu_spec[];
+#endif
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
new file mode 100644
index 0000000..c333b4e
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -0,0 +1,458 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Defines for using and allocating DMA channels on the Alchemy
+ *      Au1x00 MIPS processors.
+ *
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_AU1000_DMA_H
+#define __ASM_AU1000_DMA_H
+
+#include <linux/io.h>		/* need byte IO */
+#include <linux/spinlock.h>	/* And spinlocks */
+#include <linux/delay.h>
+#include <asm/system.h>
+
+#define NUM_AU1000_DMA_CHANNELS	8
+
+/* DMA Channel Base Addresses */
+#define DMA_CHANNEL_BASE	0xB4002000
+#define DMA_CHANNEL_LEN		0x00000100
+
+/* DMA Channel Register Offsets */
+#define DMA_MODE_SET		0x00000000
+#define DMA_MODE_READ		DMA_MODE_SET
+#define DMA_MODE_CLEAR		0x00000004
+/* DMA Mode register bits follow */
+#define DMA_DAH_MASK		(0x0f << 20)
+#define DMA_DID_BIT		16
+#define DMA_DID_MASK		(0x0f << DMA_DID_BIT)
+#define DMA_DS			(1 << 15)
+#define DMA_BE			(1 << 13)
+#define DMA_DR			(1 << 12)
+#define DMA_TS8 		(1 << 11)
+#define DMA_DW_BIT		9
+#define DMA_DW_MASK		(0x03 << DMA_DW_BIT)
+#define DMA_DW8			(0 << DMA_DW_BIT)
+#define DMA_DW16		(1 << DMA_DW_BIT)
+#define DMA_DW32		(2 << DMA_DW_BIT)
+#define DMA_NC			(1 << 8)
+#define DMA_IE			(1 << 7)
+#define DMA_HALT		(1 << 6)
+#define DMA_GO			(1 << 5)
+#define DMA_AB			(1 << 4)
+#define DMA_D1			(1 << 3)
+#define DMA_BE1 		(1 << 2)
+#define DMA_D0			(1 << 1)
+#define DMA_BE0 		(1 << 0)
+
+#define DMA_PERIPHERAL_ADDR	0x00000008
+#define DMA_BUFFER0_START	0x0000000C
+#define DMA_BUFFER1_START	0x00000014
+#define DMA_BUFFER0_COUNT	0x00000010
+#define DMA_BUFFER1_COUNT	0x00000018
+#define DMA_BAH_BIT	16
+#define DMA_BAH_MASK	(0x0f << DMA_BAH_BIT)
+#define DMA_COUNT_BIT	0
+#define DMA_COUNT_MASK	(0xffff << DMA_COUNT_BIT)
+
+/* DMA Device IDs follow */
+enum {
+	DMA_ID_UART0_TX = 0,
+	DMA_ID_UART0_RX,
+	DMA_ID_GP04,
+	DMA_ID_GP05,
+	DMA_ID_AC97C_TX,
+	DMA_ID_AC97C_RX,
+	DMA_ID_UART3_TX,
+	DMA_ID_UART3_RX,
+	DMA_ID_USBDEV_EP0_RX,
+	DMA_ID_USBDEV_EP0_TX,
+	DMA_ID_USBDEV_EP2_TX,
+	DMA_ID_USBDEV_EP3_TX,
+	DMA_ID_USBDEV_EP4_RX,
+	DMA_ID_USBDEV_EP5_RX,
+	DMA_ID_I2S_TX,
+	DMA_ID_I2S_RX,
+	DMA_NUM_DEV
+};
+
+/* DMA Device ID's for 2nd bank (AU1100) follow */
+enum {
+	DMA_ID_SD0_TX = 0,
+	DMA_ID_SD0_RX,
+	DMA_ID_SD1_TX,
+	DMA_ID_SD1_RX,
+	DMA_NUM_DEV_BANK2
+};
+
+struct dma_chan {
+	int dev_id;		/* this channel is allocated if >= 0, */
+				/* free otherwise */
+	unsigned int io;
+	const char *dev_str;
+	int irq;
+	void *irq_dev;
+	unsigned int fifo_addr;
+	unsigned int mode;
+};
+
+/* These are in arch/mips/au1000/common/dma.c */
+extern struct dma_chan au1000_dma_table[];
+extern int request_au1000_dma(int dev_id,
+			      const char *dev_str,
+			      irq_handler_t irqhandler,
+			      unsigned long irqflags,
+			      void *irq_dev_id);
+extern void free_au1000_dma(unsigned int dmanr);
+extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
+				int length, int *eof, void *data);
+extern void dump_au1000_dma_channel(unsigned int dmanr);
+extern spinlock_t au1000_dma_spin_lock;
+
+static inline struct dma_chan *get_dma_chan(unsigned int dmanr)
+{
+	if (dmanr >= NUM_AU1000_DMA_CHANNELS ||
+	    au1000_dma_table[dmanr].dev_id < 0)
+		return NULL;
+	return &au1000_dma_table[dmanr];
+}
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&au1000_dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&au1000_dma_spin_lock, flags);
+}
+
+/*
+ * Set the DMA buffer enable bits in the mode register.
+ */
+static inline void enable_dma_buffer0(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_BE0, chan->io + DMA_MODE_SET);
+}
+
+static inline void enable_dma_buffer1(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_BE1, chan->io + DMA_MODE_SET);
+}
+static inline void enable_dma_buffers(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
+}
+
+static inline void start_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_GO, chan->io + DMA_MODE_SET);
+}
+
+#define DMA_HALT_POLL 0x5000
+
+static inline void halt_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	int i;
+
+	if (!chan)
+		return;
+	au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
+
+	/* Poll the halt bit */
+	for (i = 0; i < DMA_HALT_POLL; i++)
+		if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
+			break;
+	if (i == DMA_HALT_POLL)
+		printk(KERN_INFO "halt_dma: HALT poll expired!\n");
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+
+	halt_dma(dmanr);
+
+	/* Now we can disable the buffers */
+	au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
+}
+
+static inline int dma_halted(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 1;
+	return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
+}
+
+/* Initialize a DMA channel. */
+static inline void init_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	u32 mode;
+
+	if (!chan)
+		return;
+
+	disable_dma(dmanr);
+
+	/* Set device FIFO address */
+	au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR);
+
+	mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
+	if (chan->irq)
+		mode |= DMA_IE;
+
+	au_writel(~mode, chan->io + DMA_MODE_CLEAR);
+	au_writel(mode,  chan->io + DMA_MODE_SET);
+}
+
+/*
+ * Set mode for a specific DMA channel
+ */
+static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	/*
+	 * set_dma_mode is only allowed to change endianess, direction,
+	 * transfer size, device FIFO width, and coherency settings.
+	 * Make sure anything else is masked off.
+	 */
+	mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+	chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+	chan->mode |= mode;
+}
+
+static inline unsigned int get_dma_mode(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 0;
+	return chan->mode;
+}
+
+static inline int get_dma_active_buffer(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return -1;
+	return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
+}
+
+/*
+ * Set the device FIFO address for a specific DMA channel - only
+ * applicable to GPO4 and GPO5. All the other devices have fixed
+ * FIFO addresses.
+ */
+static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+
+	if (chan->mode & DMA_DS)	/* second bank of device IDs */
+		return;
+
+	if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
+		return;
+
+	au_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR);
+}
+
+/*
+ * Clear the DMA buffer done bits in the mode register.
+ */
+static inline void clear_dma_done0(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
+}
+
+static inline void clear_dma_done1(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
+}
+
+/*
+ * This does nothing - not applicable to Au1000 DMA.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+/*
+ * Set Buffer 0 transfer address for specific DMA channel.
+ */
+static inline void set_dma_addr0(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(a, chan->io + DMA_BUFFER0_START);
+}
+
+/*
+ * Set Buffer 1 transfer address for specific DMA channel.
+ */
+static inline void set_dma_addr1(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(a, chan->io + DMA_BUFFER1_START);
+}
+
+
+/*
+ * Set Buffer 0 transfer size (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count0(unsigned int dmanr, unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	au_writel(count, chan->io + DMA_BUFFER0_COUNT);
+}
+
+/*
+ * Set Buffer 1 transfer size (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count1(unsigned int dmanr, unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	au_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Set both buffer transfer sizes (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	au_writel(count, chan->io + DMA_BUFFER0_COUNT);
+	au_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Returns which buffer has its done bit set in the mode register.
+ * Returns -1 if neither or both done bits set.
+ */
+static inline unsigned int get_dma_buffer_done(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 0;
+	return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
+}
+
+
+/*
+ * Returns the DMA channel's Buffer Done IRQ number.
+ */
+static inline int get_dma_done_irq(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return -1;
+	return chan->irq;
+}
+
+/*
+ * Get DMA residue count. Returns the number of _bytes_ left to transfer.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+	int curBufCntReg, count;
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 0;
+
+	curBufCntReg = (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ?
+	    DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT;
+
+	count = au_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK;
+
+	if ((chan->mode & DMA_DW_MASK) == DMA_DW16)
+		count <<= 1;
+	else if ((chan->mode & DMA_DW_MASK) == DMA_DW32)
+		count <<= 2;
+
+	return count;
+}
+
+#endif /* __ASM_AU1000_DMA_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_gpio.h b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h
new file mode 100644
index 0000000..d8c96fd
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h
@@ -0,0 +1,56 @@
+/*
+ * FILE NAME au1000_gpio.h
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	API to Alchemy Au1xx0 GPIO device.
+ *
+ *  Author: MontaVista Software, Inc.  <source@mvista.com>
+ *          Steve Longerbeam
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __AU1000_GPIO_H
+#define __AU1000_GPIO_H
+
+#include <linux/ioctl.h>
+
+#define AU1000GPIO_IOC_MAGIC 'A'
+
+#define AU1000GPIO_IN		_IOR(AU1000GPIO_IOC_MAGIC, 0, int)
+#define AU1000GPIO_SET		_IOW(AU1000GPIO_IOC_MAGIC, 1, int)
+#define AU1000GPIO_CLEAR	_IOW(AU1000GPIO_IOC_MAGIC, 2, int)
+#define AU1000GPIO_OUT		_IOW(AU1000GPIO_IOC_MAGIC, 3, int)
+#define AU1000GPIO_TRISTATE	_IOW(AU1000GPIO_IOC_MAGIC, 4, int)
+#define AU1000GPIO_AVAIL_MASK	_IOR(AU1000GPIO_IOC_MAGIC, 5, int)
+
+#ifdef __KERNEL__
+extern u32 get_au1000_avail_gpio_mask(void);
+extern int au1000gpio_tristate(u32 data);
+extern int au1000gpio_in(u32 *data);
+extern int au1000gpio_set(u32 data);
+extern int au1000gpio_clear(u32 data);
+extern int au1000gpio_out(u32 data);
+#endif
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
new file mode 100644
index 0000000..c35e209
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
@@ -0,0 +1,208 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Defines for using the MMC/SD controllers on the
+ *      Alchemy Au1100 mips processor.
+ *
+ * Copyright (c) 2003 Embedded Edge, LLC.
+ * Author: Embedded Edge, LLC.
+ *         	dan@embeddededge.com or tim@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+/*
+ * AU1100 MMC/SD definitions.
+ *
+ * From "AMD Alchemy Solutions Au1100 Processor Data Book - Preliminary"
+ *    June, 2003
+ */
+
+#ifndef __ASM_AU1100_MMC_H
+#define __ASM_AU1100_MMC_H
+
+#include <linux/leds.h>
+
+struct au1xmmc_platform_data {
+	int(*cd_setup)(void *mmc_host, int on);
+	int(*card_inserted)(void *mmc_host);
+	int(*card_readonly)(void *mmc_host);
+	void(*set_power)(void *mmc_host, int state);
+	struct led_classdev *led;
+};
+
+#define SD0_BASE	0xB0600000
+#define SD1_BASE	0xB0680000
+
+
+/*
+ *  Register offsets.
+ */
+#define SD_TXPORT	(0x0000)
+#define SD_RXPORT	(0x0004)
+#define SD_CONFIG	(0x0008)
+#define SD_ENABLE	(0x000C)
+#define SD_CONFIG2	(0x0010)
+#define SD_BLKSIZE	(0x0014)
+#define SD_STATUS	(0x0018)
+#define SD_DEBUG	(0x001C)
+#define SD_CMD		(0x0020)
+#define SD_CMDARG	(0x0024)
+#define SD_RESP3	(0x0028)
+#define SD_RESP2	(0x002C)
+#define SD_RESP1	(0x0030)
+#define SD_RESP0	(0x0034)
+#define SD_TIMEOUT	(0x0038)
+
+
+/*
+ *  SD_TXPORT bit definitions.
+ */
+#define SD_TXPORT_TXD	(0x000000ff)
+
+
+/*
+ *  SD_RXPORT bit definitions.
+ */
+#define SD_RXPORT_RXD	(0x000000ff)
+
+
+/*
+ *  SD_CONFIG bit definitions.
+ */
+#define SD_CONFIG_DIV	(0x000001ff)
+#define SD_CONFIG_DE	(0x00000200)
+#define SD_CONFIG_NE	(0x00000400)
+#define SD_CONFIG_TU	(0x00000800)
+#define SD_CONFIG_TO	(0x00001000)
+#define SD_CONFIG_RU	(0x00002000)
+#define SD_CONFIG_RO	(0x00004000)
+#define SD_CONFIG_I	(0x00008000)
+#define SD_CONFIG_CR	(0x00010000)
+#define SD_CONFIG_RAT	(0x00020000)
+#define SD_CONFIG_DD	(0x00040000)
+#define SD_CONFIG_DT	(0x00080000)
+#define SD_CONFIG_SC	(0x00100000)
+#define SD_CONFIG_RC	(0x00200000)
+#define SD_CONFIG_WC	(0x00400000)
+#define SD_CONFIG_xxx	(0x00800000)
+#define SD_CONFIG_TH	(0x01000000)
+#define SD_CONFIG_TE	(0x02000000)
+#define SD_CONFIG_TA	(0x04000000)
+#define SD_CONFIG_RH	(0x08000000)
+#define SD_CONFIG_RA	(0x10000000)
+#define SD_CONFIG_RF	(0x20000000)
+#define SD_CONFIG_CD	(0x40000000)
+#define SD_CONFIG_SI	(0x80000000)
+
+
+/*
+ *  SD_ENABLE bit definitions.
+ */
+#define SD_ENABLE_CE	(0x00000001)
+#define SD_ENABLE_R	(0x00000002)
+
+
+/*
+ *  SD_CONFIG2 bit definitions.
+ */
+#define SD_CONFIG2_EN	(0x00000001)
+#define SD_CONFIG2_FF	(0x00000002)
+#define SD_CONFIG2_xx1	(0x00000004)
+#define SD_CONFIG2_DF	(0x00000008)
+#define SD_CONFIG2_DC	(0x00000010)
+#define SD_CONFIG2_xx2	(0x000000e0)
+#define SD_CONFIG2_WB	(0x00000100)
+#define SD_CONFIG2_RW	(0x00000200)
+
+
+/*
+ *  SD_BLKSIZE bit definitions.
+ */
+#define SD_BLKSIZE_BS	(0x000007ff)
+#define SD_BLKSIZE_BS_SHIFT	 (0)
+#define SD_BLKSIZE_BC	(0x01ff0000)
+#define SD_BLKSIZE_BC_SHIFT	(16)
+
+
+/*
+ *  SD_STATUS bit definitions.
+ */
+#define SD_STATUS_DCRCW	(0x00000007)
+#define SD_STATUS_xx1	(0x00000008)
+#define SD_STATUS_CB	(0x00000010)
+#define SD_STATUS_DB	(0x00000020)
+#define SD_STATUS_CF	(0x00000040)
+#define SD_STATUS_D3	(0x00000080)
+#define SD_STATUS_xx2	(0x00000300)
+#define SD_STATUS_NE	(0x00000400)
+#define SD_STATUS_TU	(0x00000800)
+#define SD_STATUS_TO	(0x00001000)
+#define SD_STATUS_RU	(0x00002000)
+#define SD_STATUS_RO	(0x00004000)
+#define SD_STATUS_I	(0x00008000)
+#define SD_STATUS_CR	(0x00010000)
+#define SD_STATUS_RAT	(0x00020000)
+#define SD_STATUS_DD	(0x00040000)
+#define SD_STATUS_DT	(0x00080000)
+#define SD_STATUS_SC	(0x00100000)
+#define SD_STATUS_RC	(0x00200000)
+#define SD_STATUS_WC	(0x00400000)
+#define SD_STATUS_xx3	(0x00800000)
+#define SD_STATUS_TH	(0x01000000)
+#define SD_STATUS_TE	(0x02000000)
+#define SD_STATUS_TA	(0x04000000)
+#define SD_STATUS_RH	(0x08000000)
+#define SD_STATUS_RA	(0x10000000)
+#define SD_STATUS_RF	(0x20000000)
+#define SD_STATUS_CD	(0x40000000)
+#define SD_STATUS_SI	(0x80000000)
+
+
+/*
+ *  SD_CMD bit definitions.
+ */
+#define SD_CMD_GO	(0x00000001)
+#define SD_CMD_RY	(0x00000002)
+#define SD_CMD_xx1	(0x0000000c)
+#define SD_CMD_CT_MASK	(0x000000f0)
+#define SD_CMD_CT_0	(0x00000000)
+#define SD_CMD_CT_1	(0x00000010)
+#define SD_CMD_CT_2	(0x00000020)
+#define SD_CMD_CT_3	(0x00000030)
+#define SD_CMD_CT_4	(0x00000040)
+#define SD_CMD_CT_5	(0x00000050)
+#define SD_CMD_CT_6	(0x00000060)
+#define SD_CMD_CT_7	(0x00000070)
+#define SD_CMD_CI	(0x0000ff00)
+#define SD_CMD_CI_SHIFT		(8)
+#define SD_CMD_RT_MASK	(0x00ff0000)
+#define SD_CMD_RT_0	(0x00000000)
+#define SD_CMD_RT_1	(0x00010000)
+#define SD_CMD_RT_2	(0x00020000)
+#define SD_CMD_RT_3	(0x00030000)
+#define SD_CMD_RT_4	(0x00040000)
+#define SD_CMD_RT_5	(0x00050000)
+#define SD_CMD_RT_6	(0x00060000)
+#define SD_CMD_RT_1B	(0x00810000)
+
+
+#endif /* __ASM_AU1100_MMC_H */
+
diff --git a/arch/mips/include/asm/mach-au1x00/au1550_spi.h b/arch/mips/include/asm/mach-au1x00/au1550_spi.h
new file mode 100644
index 0000000..08e1958
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1550_spi.h
@@ -0,0 +1,15 @@
+/*
+ * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure
+ */
+
+#ifndef _AU1550_SPI_H_
+#define _AU1550_SPI_H_
+
+struct au1550_spi_info {
+	u32 mainclk_hz;		/* main input clock frequency of PSC */
+	u16 num_chipselect;	/* number of chipselects supported */
+	void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
+	void (*deactivate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx.h b/arch/mips/include/asm/mach-au1x00/au1xxx.h
new file mode 100644
index 0000000..1b36550
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx.h
@@ -0,0 +1,43 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _AU1XXX_H_
+#define _AU1XXX_H_
+
+#include <asm/mach-au1x00/au1000.h>
+
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
+    defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#include <asm/mach-db1x00/db1x00.h>
+
+#elif defined(CONFIG_MIPS_PB1550)
+#include <asm/mach-pb1x00/pb1550.h>
+
+#elif defined(CONFIG_MIPS_PB1200)
+#include <asm/mach-pb1x00/pb1200.h>
+
+#elif defined(CONFIG_MIPS_DB1200)
+#include <asm/mach-db1x00/db1200.h>
+
+#endif
+
+#endif /* _AU1XXX_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
new file mode 100644
index 0000000..44a67bf
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -0,0 +1,386 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1550 Descriptor
+ *	Based DMA Controller.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Specifics for the Au1xxx Descriptor-Based DMA Controller,
+ * first seen in the AU1550 part.
+ */
+#ifndef _AU1000_DBDMA_H_
+#define _AU1000_DBDMA_H_
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/*
+ * The DMA base addresses.
+ * The channels are every 256 bytes (0x0100) from the channel 0 base.
+ * Interrupt status/enable is bits 15:0 for channels 15 to zero.
+ */
+#define DDMA_GLOBAL_BASE	0xb4003000
+#define DDMA_CHANNEL_BASE	0xb4002000
+
+typedef volatile struct dbdma_global {
+	u32	ddma_config;
+	u32	ddma_intstat;
+	u32	ddma_throttle;
+	u32	ddma_inten;
+} dbdma_global_t;
+
+/* General Configuration. */
+#define DDMA_CONFIG_AF		(1 << 2)
+#define DDMA_CONFIG_AH		(1 << 1)
+#define DDMA_CONFIG_AL		(1 << 0)
+
+#define DDMA_THROTTLE_EN	(1 << 31)
+
+/* The structure of a DMA Channel. */
+typedef volatile struct au1xxx_dma_channel {
+	u32	ddma_cfg;	/* See below */
+	u32	ddma_desptr;	/* 32-byte aligned pointer to descriptor */
+	u32	ddma_statptr;	/* word aligned pointer to status word */
+	u32	ddma_dbell;	/* A write activates channel operation */
+	u32	ddma_irq;	/* If bit 0 set, interrupt pending */
+	u32	ddma_stat;	/* See below */
+	u32	ddma_bytecnt;	/* Byte count, valid only when chan idle */
+	/* Remainder, up to the 256 byte boundary, is reserved. */
+} au1x_dma_chan_t;
+
+#define DDMA_CFG_SED	(1 << 9)	/* source DMA level/edge detect */
+#define DDMA_CFG_SP	(1 << 8)	/* source DMA polarity */
+#define DDMA_CFG_DED	(1 << 7)	/* destination DMA level/edge detect */
+#define DDMA_CFG_DP	(1 << 6)	/* destination DMA polarity */
+#define DDMA_CFG_SYNC	(1 << 5)	/* Sync static bus controller */
+#define DDMA_CFG_PPR	(1 << 4)	/* PCI posted read/write control */
+#define DDMA_CFG_DFN	(1 << 3)	/* Descriptor fetch non-coherent */
+#define DDMA_CFG_SBE	(1 << 2)	/* Source big endian */
+#define DDMA_CFG_DBE	(1 << 1)	/* Destination big endian */
+#define DDMA_CFG_EN	(1 << 0)	/* Channel enable */
+
+/*
+ * Always set when descriptor processing done, regardless of
+ * interrupt enable state.  Reflected in global intstat, don't
+ * clear this until global intstat is read/used.
+ */
+#define DDMA_IRQ_IN	(1 << 0)
+
+#define DDMA_STAT_DB	(1 << 2)	/* Doorbell pushed */
+#define DDMA_STAT_V	(1 << 1)	/* Descriptor valid */
+#define DDMA_STAT_H	(1 << 0)	/* Channel Halted */
+
+/*
+ * "Standard" DDMA Descriptor.
+ * Must be 32-byte aligned.
+ */
+typedef volatile struct au1xxx_ddma_desc {
+	u32	dscr_cmd0;		/* See below */
+	u32	dscr_cmd1;		/* See below */
+	u32	dscr_source0;		/* source phys address */
+	u32	dscr_source1;		/* See below */
+	u32	dscr_dest0;		/* Destination address */
+	u32	dscr_dest1;		/* See below */
+	u32	dscr_stat;		/* completion status */
+	u32	dscr_nxtptr;		/* Next descriptor pointer (mostly) */
+	/*
+	 * First 32 bytes are HW specific!!!
+	 * Lets have some SW data following -- make sure it's 32 bytes.
+	 */
+	u32	sw_status;
+	u32 	sw_context;
+	u32	sw_reserved[6];
+} au1x_ddma_desc_t;
+
+#define DSCR_CMD0_V		(1 << 31)	/* Descriptor valid */
+#define DSCR_CMD0_MEM		(1 << 30)	/* mem-mem transfer */
+#define DSCR_CMD0_SID_MASK	(0x1f << 25)	/* Source ID */
+#define DSCR_CMD0_DID_MASK	(0x1f << 20)	/* Destination ID */
+#define DSCR_CMD0_SW_MASK	(0x3 << 18)	/* Source Width */
+#define DSCR_CMD0_DW_MASK	(0x3 << 16)	/* Destination Width */
+#define DSCR_CMD0_ARB		(0x1 << 15)	/* Set for Hi Pri */
+#define DSCR_CMD0_DT_MASK	(0x3 << 13)	/* Descriptor Type */
+#define DSCR_CMD0_SN		(0x1 << 12)	/* Source non-coherent */
+#define DSCR_CMD0_DN		(0x1 << 11)	/* Destination non-coherent */
+#define DSCR_CMD0_SM		(0x1 << 10)	/* Stride mode */
+#define DSCR_CMD0_IE		(0x1 << 8)	/* Interrupt Enable */
+#define DSCR_CMD0_SP		(0x1 << 4)	/* Status pointer select */
+#define DSCR_CMD0_CV		(0x1 << 2)	/* Clear Valid when done */
+#define DSCR_CMD0_ST_MASK	(0x3 << 0)	/* Status instruction */
+
+#define SW_STATUS_INUSE 	(1 << 0)
+
+/* Command 0 device IDs. */
+#ifdef CONFIG_SOC_AU1550
+#define DSCR_CMD0_UART0_TX	0
+#define DSCR_CMD0_UART0_RX	1
+#define DSCR_CMD0_UART3_TX	2
+#define DSCR_CMD0_UART3_RX	3
+#define DSCR_CMD0_DMA_REQ0	4
+#define DSCR_CMD0_DMA_REQ1	5
+#define DSCR_CMD0_DMA_REQ2	6
+#define DSCR_CMD0_DMA_REQ3	7
+#define DSCR_CMD0_USBDEV_RX0	8
+#define DSCR_CMD0_USBDEV_TX0	9
+#define DSCR_CMD0_USBDEV_TX1	10
+#define DSCR_CMD0_USBDEV_TX2	11
+#define DSCR_CMD0_USBDEV_RX3	12
+#define DSCR_CMD0_USBDEV_RX4	13
+#define DSCR_CMD0_PSC0_TX	14
+#define DSCR_CMD0_PSC0_RX	15
+#define DSCR_CMD0_PSC1_TX	16
+#define DSCR_CMD0_PSC1_RX	17
+#define DSCR_CMD0_PSC2_TX	18
+#define DSCR_CMD0_PSC2_RX	19
+#define DSCR_CMD0_PSC3_TX	20
+#define DSCR_CMD0_PSC3_RX	21
+#define DSCR_CMD0_PCI_WRITE	22
+#define DSCR_CMD0_NAND_FLASH	23
+#define DSCR_CMD0_MAC0_RX	24
+#define DSCR_CMD0_MAC0_TX	25
+#define DSCR_CMD0_MAC1_RX	26
+#define DSCR_CMD0_MAC1_TX	27
+#endif /* CONFIG_SOC_AU1550 */
+
+#ifdef CONFIG_SOC_AU1200
+#define DSCR_CMD0_UART0_TX	0
+#define DSCR_CMD0_UART0_RX	1
+#define DSCR_CMD0_UART1_TX	2
+#define DSCR_CMD0_UART1_RX	3
+#define DSCR_CMD0_DMA_REQ0	4
+#define DSCR_CMD0_DMA_REQ1	5
+#define DSCR_CMD0_MAE_BE	6
+#define DSCR_CMD0_MAE_FE	7
+#define DSCR_CMD0_SDMS_TX0	8
+#define DSCR_CMD0_SDMS_RX0	9
+#define DSCR_CMD0_SDMS_TX1	10
+#define DSCR_CMD0_SDMS_RX1	11
+#define DSCR_CMD0_AES_TX	13
+#define DSCR_CMD0_AES_RX	12
+#define DSCR_CMD0_PSC0_TX	14
+#define DSCR_CMD0_PSC0_RX	15
+#define DSCR_CMD0_PSC1_TX	16
+#define DSCR_CMD0_PSC1_RX	17
+#define DSCR_CMD0_CIM_RXA	18
+#define DSCR_CMD0_CIM_RXB	19
+#define DSCR_CMD0_CIM_RXC	20
+#define DSCR_CMD0_MAE_BOTH	21
+#define DSCR_CMD0_LCD		22
+#define DSCR_CMD0_NAND_FLASH	23
+#define DSCR_CMD0_PSC0_SYNC	24
+#define DSCR_CMD0_PSC1_SYNC	25
+#define DSCR_CMD0_CIM_SYNC	26
+#endif /* CONFIG_SOC_AU1200 */
+
+#define DSCR_CMD0_THROTTLE	30
+#define DSCR_CMD0_ALWAYS	31
+#define DSCR_NDEV_IDS		32
+/* This macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \
+				  ((d) & 0xFF))
+#define DSCR_CUSTOM2DEV_ID(x)	((x) & 0xFF)
+
+#define DSCR_CMD0_SID(x)	(((x) & 0x1f) << 25)
+#define DSCR_CMD0_DID(x)	(((x) & 0x1f) << 20)
+
+/* Source/Destination transfer width. */
+#define DSCR_CMD0_BYTE		0
+#define DSCR_CMD0_HALFWORD	1
+#define DSCR_CMD0_WORD		2
+
+#define DSCR_CMD0_SW(x)		(((x) & 0x3) << 18)
+#define DSCR_CMD0_DW(x)		(((x) & 0x3) << 16)
+
+/* DDMA Descriptor Type. */
+#define DSCR_CMD0_STANDARD	0
+#define DSCR_CMD0_LITERAL	1
+#define DSCR_CMD0_CMP_BRANCH	2
+
+#define DSCR_CMD0_DT(x)		(((x) & 0x3) << 13)
+
+/* Status Instruction. */
+#define DSCR_CMD0_ST_NOCHANGE	0	/* Don't change */
+#define DSCR_CMD0_ST_CURRENT	1	/* Write current status */
+#define DSCR_CMD0_ST_CMD0	2	/* Write cmd0 with V cleared */
+#define DSCR_CMD0_ST_BYTECNT	3	/* Write remaining byte count */
+
+#define DSCR_CMD0_ST(x)		(((x) & 0x3) << 0)
+
+/* Descriptor Command 1. */
+#define DSCR_CMD1_SUPTR_MASK	(0xf << 28)	/* upper 4 bits of src addr */
+#define DSCR_CMD1_DUPTR_MASK	(0xf << 24)	/* upper 4 bits of dest addr */
+#define DSCR_CMD1_FL_MASK	(0x3 << 22)	/* Flag bits */
+#define DSCR_CMD1_BC_MASK	(0x3fffff)	/* Byte count */
+
+/* Flag description. */
+#define DSCR_CMD1_FL_MEM_STRIDE0	0
+#define DSCR_CMD1_FL_MEM_STRIDE1	1
+#define DSCR_CMD1_FL_MEM_STRIDE2	2
+
+#define DSCR_CMD1_FL(x)		(((x) & 0x3) << 22)
+
+/* Source1, 1-dimensional stride. */
+#define DSCR_SRC1_STS_MASK	(3 << 30)	/* Src xfer size */
+#define DSCR_SRC1_SAM_MASK	(3 << 28)	/* Src xfer movement */
+#define DSCR_SRC1_SB_MASK	(0x3fff << 14)	/* Block size */
+#define DSCR_SRC1_SB(x)		(((x) & 0x3fff) << 14)
+#define DSCR_SRC1_SS_MASK	(0x3fff << 0)	/* Stride */
+#define DSCR_SRC1_SS(x)		(((x) & 0x3fff) << 0)
+
+/* Dest1, 1-dimensional stride. */
+#define DSCR_DEST1_DTS_MASK	(3 << 30)	/* Dest xfer size */
+#define DSCR_DEST1_DAM_MASK	(3 << 28)	/* Dest xfer movement */
+#define DSCR_DEST1_DB_MASK	(0x3fff << 14)	/* Block size */
+#define DSCR_DEST1_DB(x)	(((x) & 0x3fff) << 14)
+#define DSCR_DEST1_DS_MASK	(0x3fff << 0)	/* Stride */
+#define DSCR_DEST1_DS(x)	(((x) & 0x3fff) << 0)
+
+#define DSCR_xTS_SIZE1		0
+#define DSCR_xTS_SIZE2		1
+#define DSCR_xTS_SIZE4		2
+#define DSCR_xTS_SIZE8		3
+#define DSCR_SRC1_STS(x)	(((x) & 3) << 30)
+#define DSCR_DEST1_DTS(x)	(((x) & 3) << 30)
+
+#define DSCR_xAM_INCREMENT	0
+#define DSCR_xAM_DECREMENT	1
+#define DSCR_xAM_STATIC		2
+#define DSCR_xAM_BURST		3
+#define DSCR_SRC1_SAM(x)	(((x) & 3) << 28)
+#define DSCR_DEST1_DAM(x)	(((x) & 3) << 28)
+
+/* The next descriptor pointer. */
+#define DSCR_NXTPTR_MASK	(0x07ffffff)
+#define DSCR_NXTPTR(x)		((x) >> 5)
+#define DSCR_GET_NXTPTR(x)	((x) << 5)
+#define DSCR_NXTPTR_MS		(1 << 27)
+
+/* The number of DBDMA channels. */
+#define NUM_DBDMA_CHANS	16
+
+/*
+ * DDMA API definitions
+ * FIXME: may not fit to this header file
+ */
+typedef struct dbdma_device_table {
+	u32	dev_id;
+	u32	dev_flags;
+	u32	dev_tsize;
+	u32	dev_devwidth;
+	u32	dev_physaddr;		/* If FIFO */
+	u32	dev_intlevel;
+	u32	dev_intpolarity;
+} dbdev_tab_t;
+
+
+typedef struct dbdma_chan_config {
+	spinlock_t      lock;
+
+	u32			chan_flags;
+	u32			chan_index;
+	dbdev_tab_t		*chan_src;
+	dbdev_tab_t		*chan_dest;
+	au1x_dma_chan_t		*chan_ptr;
+	au1x_ddma_desc_t	*chan_desc_base;
+	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
+	void			*chan_callparam;
+	void			(*chan_callback)(int, void *);
+} chan_tab_t;
+
+#define DEV_FLAGS_INUSE		(1 << 0)
+#define DEV_FLAGS_ANYUSE	(1 << 1)
+#define DEV_FLAGS_OUT		(1 << 2)
+#define DEV_FLAGS_IN		(1 << 3)
+#define DEV_FLAGS_BURSTABLE	(1 << 4)
+#define DEV_FLAGS_SYNC		(1 << 5)
+/* end DDMA API definitions */
+
+/*
+ * External functions for drivers to use.
+ * Use this to allocate a DBDMA channel.  The device IDs are one of
+ * the DSCR_CMD0 devices IDs, which is usually redefined to a more
+ * meaningful name.  The 'callback' is called during DMA completion
+ * interrupt.
+ */
+extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+				   void (*callback)(int, void *),
+				   void *callparam);
+
+#define DBDMA_MEM_CHAN	DSCR_CMD0_ALWAYS
+
+/* Set the device width of an in/out FIFO. */
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
+
+/* Allocate a ring of descriptors for DBDMA. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
+
+/* Put buffers on source/destination descriptors. */
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
+u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
+
+/* Get a buffer from the destination descriptor. */
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
+
+void au1xxx_dbdma_stop(u32 chanid);
+void au1xxx_dbdma_start(u32 chanid);
+void au1xxx_dbdma_reset(u32 chanid);
+u32 au1xxx_get_dma_residue(u32 chanid);
+
+void au1xxx_dbdma_chan_free(u32 chanid);
+void au1xxx_dbdma_dump(u32 chanid);
+
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
+
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+
+/*
+ * Some compatibilty macros -- needed to make changes to API
+ * without breaking existing drivers.
+ */
+#define au1xxx_dbdma_put_source(chanid, buf, nbytes)			\
+	_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)	\
+	_au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+#define put_source_flags(chanid, buf, nbytes, flags)			\
+	au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
+
+#define au1xxx_dbdma_put_dest(chanid, buf, nbytes)			\
+	_au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) 	\
+	_au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+#define put_dest_flags(chanid, buf, nbytes, flags)			\
+	au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
+
+/*
+ *	Flags for the put_source/put_dest functions.
+ */
+#define DDMA_FLAGS_IE	(1 << 0)
+#define DDMA_FLAGS_NOIE (1 << 1)
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* _AU1000_DBDMA_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
new file mode 100644
index 0000000..60638b8
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -0,0 +1,194 @@
+/*
+ * include/asm-mips/mach-au1x00/au1xxx_ide.h  version 01.30.00   Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ *       Interface and Linux Device Driver" Application Note.
+ */
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+#define DMA_WAIT_TIMEOUT	100
+#define NUM_DESCRIPTORS 	PRD_ENTRIES
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+#define NUM_DESCRIPTORS 	2
+#endif
+
+#ifndef AU1XXX_ATA_RQSIZE
+#define AU1XXX_ATA_RQSIZE	128
+#endif
+
+/* Disable Burstable-Support for DBDMA */
+#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON	0
+#endif
+
+#ifdef CONFIG_PM
+/*
+ * This will enable the device to be powered up when write() or read()
+ * is called. If this is not defined, the driver will return -EBUSY.
+ */
+#define WAKE_ON_ACCESS 1
+
+typedef struct {
+	spinlock_t		lock;	/* Used to block on state transitions */
+	au1xxx_power_dev_t	*dev;	/* Power Managers device structure */
+	unsigned		stopped; /* Used to signal device is stopped */
+} pm_state;
+#endif
+
+typedef struct {
+	u32			tx_dev_id, rx_dev_id, target_dev_id;
+	u32			tx_chan, rx_chan;
+	void			*tx_desc_head, *rx_desc_head;
+	ide_hwif_t		*hwif;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+	ide_drive_t		*drive;
+	struct dbdma_cmd	*dma_table_cpu;
+	dma_addr_t		dma_table_dma;
+#endif
+	int			irq;
+	u32			regbase;
+#ifdef CONFIG_PM
+	pm_state		pm;
+#endif
+} _auide_hwif;
+
+/******************************************************************************/
+/* PIO Mode timing calculation :					      */
+/*									      */
+/* Static Bus Spec   ATA Spec						      */
+/*	Tcsoe	   =	t1						      */
+/*	Toecs	   =	t9						      */
+/*	Twcs	   =	t9						      */
+/*	Tcsh	   =	t2i | t2					      */
+/*	Tcsoff	   =	t2i | t2					      */
+/*	Twp	   =	t2						      */
+/*	Tcsw	   =	t1						      */
+/*	Tpm	   =	0						      */
+/*	Ta	   =	t1+t2						      */
+/******************************************************************************/
+
+#define TCSOE_MASK		(0x07 << 29)
+#define TOECS_MASK		(0x07 << 26)
+#define TWCS_MASK		(0x07 << 28)
+#define TCSH_MASK		(0x0F << 24)
+#define TCSOFF_MASK		(0x07 << 20)
+#define TWP_MASK		(0x3F << 14)
+#define TCSW_MASK		(0x0F << 10)
+#define TPM_MASK		(0x0F << 6)
+#define TA_MASK 		(0x3F << 0)
+#define TS_MASK 		(1 << 8)
+
+/* Timing parameters PIO mode 0 */
+#define SBC_IDE_PIO0_TCSOE	(0x04 << 29)
+#define SBC_IDE_PIO0_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO0_TWCS	(0x02 << 28)
+#define SBC_IDE_PIO0_TCSH	(0x08 << 24)
+#define SBC_IDE_PIO0_TCSOFF	(0x07 << 20)
+#define SBC_IDE_PIO0_TWP	(0x10 << 14)
+#define SBC_IDE_PIO0_TCSW	(0x04 << 10)
+#define SBC_IDE_PIO0_TPM	(0x00 << 6)
+#define SBC_IDE_PIO0_TA 	(0x15 << 0)
+/* Timing parameters PIO mode 1 */
+#define SBC_IDE_PIO1_TCSOE	(0x03 << 29)
+#define SBC_IDE_PIO1_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO1_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO1_TCSH	(0x06 << 24)
+#define SBC_IDE_PIO1_TCSOFF	(0x06 << 20)
+#define SBC_IDE_PIO1_TWP	(0x08 << 14)
+#define SBC_IDE_PIO1_TCSW	(0x03 << 10)
+#define SBC_IDE_PIO1_TPM	(0x00 << 6)
+#define SBC_IDE_PIO1_TA 	(0x0B << 0)
+/* Timing parameters PIO mode 2 */
+#define SBC_IDE_PIO2_TCSOE	(0x05 << 29)
+#define SBC_IDE_PIO2_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO2_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO2_TCSH	(0x07 << 24)
+#define SBC_IDE_PIO2_TCSOFF	(0x07 << 20)
+#define SBC_IDE_PIO2_TWP	(0x1F << 14)
+#define SBC_IDE_PIO2_TCSW	(0x05 << 10)
+#define SBC_IDE_PIO2_TPM	(0x00 << 6)
+#define SBC_IDE_PIO2_TA 	(0x22 << 0)
+/* Timing parameters PIO mode 3 */
+#define SBC_IDE_PIO3_TCSOE	(0x05 << 29)
+#define SBC_IDE_PIO3_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO3_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO3_TCSH	(0x0D << 24)
+#define SBC_IDE_PIO3_TCSOFF	(0x0D << 20)
+#define SBC_IDE_PIO3_TWP	(0x15 << 14)
+#define SBC_IDE_PIO3_TCSW	(0x05 << 10)
+#define SBC_IDE_PIO3_TPM	(0x00 << 6)
+#define SBC_IDE_PIO3_TA 	(0x1A << 0)
+/* Timing parameters PIO mode 4 */
+#define SBC_IDE_PIO4_TCSOE	(0x04 << 29)
+#define SBC_IDE_PIO4_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO4_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO4_TCSH	(0x04 << 24)
+#define SBC_IDE_PIO4_TCSOFF	(0x04 << 20)
+#define SBC_IDE_PIO4_TWP	(0x0D << 14)
+#define SBC_IDE_PIO4_TCSW	(0x03 << 10)
+#define SBC_IDE_PIO4_TPM	(0x00 << 6)
+#define SBC_IDE_PIO4_TA 	(0x12 << 0)
+/* Timing parameters MDMA mode 0 */
+#define SBC_IDE_MDMA0_TCSOE	(0x03 << 29)
+#define SBC_IDE_MDMA0_TOECS	(0x01 << 26)
+#define SBC_IDE_MDMA0_TWCS	(0x01 << 28)
+#define SBC_IDE_MDMA0_TCSH	(0x07 << 24)
+#define SBC_IDE_MDMA0_TCSOFF	(0x07 << 20)
+#define SBC_IDE_MDMA0_TWP	(0x0C << 14)
+#define SBC_IDE_MDMA0_TCSW	(0x03 << 10)
+#define SBC_IDE_MDMA0_TPM	(0x00 << 6)
+#define SBC_IDE_MDMA0_TA	(0x0F << 0)
+/* Timing parameters MDMA mode 1 */
+#define SBC_IDE_MDMA1_TCSOE	(0x05 << 29)
+#define SBC_IDE_MDMA1_TOECS	(0x01 << 26)
+#define SBC_IDE_MDMA1_TWCS	(0x01 << 28)
+#define SBC_IDE_MDMA1_TCSH	(0x05 << 24)
+#define SBC_IDE_MDMA1_TCSOFF	(0x05 << 20)
+#define SBC_IDE_MDMA1_TWP	(0x0F << 14)
+#define SBC_IDE_MDMA1_TCSW	(0x05 << 10)
+#define SBC_IDE_MDMA1_TPM	(0x00 << 6)
+#define SBC_IDE_MDMA1_TA	(0x15 << 0)
+/* Timing parameters MDMA mode 2 */
+#define SBC_IDE_MDMA2_TCSOE	(0x04 << 29)
+#define SBC_IDE_MDMA2_TOECS	(0x01 << 26)
+#define SBC_IDE_MDMA2_TWCS	(0x01 << 28)
+#define SBC_IDE_MDMA2_TCSH	(0x04 << 24)
+#define SBC_IDE_MDMA2_TCSOFF	(0x04 << 20)
+#define SBC_IDE_MDMA2_TWP	(0x0D << 14)
+#define SBC_IDE_MDMA2_TCSW	(0x04 << 10)
+#define SBC_IDE_MDMA2_TPM	(0x00 << 6)
+#define SBC_IDE_MDMA2_TA	(0x12 << 0)
+
+#define SBC_IDE_TIMING(mode) \
+	(SBC_IDE_##mode##_TWCS | \
+	 SBC_IDE_##mode##_TCSH | \
+	 SBC_IDE_##mode##_TCSOFF | \
+	 SBC_IDE_##mode##_TWP | \
+	 SBC_IDE_##mode##_TCSW | \
+	 SBC_IDE_##mode##_TPM | \
+	 SBC_IDE_##mode##_TA)
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
new file mode 100644
index 0000000..892b7f1
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
@@ -0,0 +1,505 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Specifics for the Au1xxx Programmable Serial Controllers, first
+ * seen in the AU1550 part.
+ */
+#ifndef _AU1000_PSC_H_
+#define _AU1000_PSC_H_
+
+/* The PSC base addresses.  */
+#ifdef CONFIG_SOC_AU1550
+#define PSC0_BASE_ADDR		0xb1a00000
+#define PSC1_BASE_ADDR		0xb1b00000
+#define PSC2_BASE_ADDR		0xb0a00000
+#define PSC3_BASE_ADDR		0xb0b00000
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+#define PSC0_BASE_ADDR		0xb1a00000
+#define PSC1_BASE_ADDR		0xb1b00000
+#endif
+
+/*
+ * The PSC select and control registers are common to all protocols.
+ */
+#define PSC_SEL_OFFSET		0x00000000
+#define PSC_CTRL_OFFSET		0x00000004
+
+#define PSC_SEL_CLK_MASK	(3 << 4)
+#define PSC_SEL_CLK_INTCLK	(0 << 4)
+#define PSC_SEL_CLK_EXTCLK	(1 << 4)
+#define PSC_SEL_CLK_SERCLK	(2 << 4)
+
+#define PSC_SEL_PS_MASK		0x00000007
+#define PSC_SEL_PS_DISABLED	0
+#define PSC_SEL_PS_SPIMODE	2
+#define PSC_SEL_PS_I2SMODE	3
+#define PSC_SEL_PS_AC97MODE	4
+#define PSC_SEL_PS_SMBUSMODE	5
+
+#define PSC_CTRL_DISABLE	0
+#define PSC_CTRL_SUSPEND	2
+#define PSC_CTRL_ENABLE 	3
+
+/* AC97 Registers. */
+#define PSC_AC97CFG_OFFSET	0x00000008
+#define PSC_AC97MSK_OFFSET	0x0000000c
+#define PSC_AC97PCR_OFFSET	0x00000010
+#define PSC_AC97STAT_OFFSET	0x00000014
+#define PSC_AC97EVNT_OFFSET	0x00000018
+#define PSC_AC97TXRX_OFFSET	0x0000001c
+#define PSC_AC97CDC_OFFSET	0x00000020
+#define PSC_AC97RST_OFFSET	0x00000024
+#define PSC_AC97GPO_OFFSET	0x00000028
+#define PSC_AC97GPI_OFFSET	0x0000002c
+
+#define AC97_PSC_SEL		(AC97_PSC_BASE + PSC_SEL_OFFSET)
+#define AC97_PSC_CTRL		(AC97_PSC_BASE + PSC_CTRL_OFFSET)
+#define PSC_AC97CFG		(AC97_PSC_BASE + PSC_AC97CFG_OFFSET)
+#define PSC_AC97MSK		(AC97_PSC_BASE + PSC_AC97MSK_OFFSET)
+#define PSC_AC97PCR		(AC97_PSC_BASE + PSC_AC97PCR_OFFSET)
+#define PSC_AC97STAT		(AC97_PSC_BASE + PSC_AC97STAT_OFFSET)
+#define PSC_AC97EVNT		(AC97_PSC_BASE + PSC_AC97EVNT_OFFSET)
+#define PSC_AC97TXRX		(AC97_PSC_BASE + PSC_AC97TXRX_OFFSET)
+#define PSC_AC97CDC		(AC97_PSC_BASE + PSC_AC97CDC_OFFSET)
+#define PSC_AC97RST		(AC97_PSC_BASE + PSC_AC97RST_OFFSET)
+#define PSC_AC97GPO		(AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
+#define PSC_AC97GPI		(AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
+
+/* AC97 Config Register. */
+#define PSC_AC97CFG_RT_MASK	(3 << 30)
+#define PSC_AC97CFG_RT_FIFO1	(0 << 30)
+#define PSC_AC97CFG_RT_FIFO2	(1 << 30)
+#define PSC_AC97CFG_RT_FIFO4	(2 << 30)
+#define PSC_AC97CFG_RT_FIFO8	(3 << 30)
+
+#define PSC_AC97CFG_TT_MASK	(3 << 28)
+#define PSC_AC97CFG_TT_FIFO1	(0 << 28)
+#define PSC_AC97CFG_TT_FIFO2	(1 << 28)
+#define PSC_AC97CFG_TT_FIFO4	(2 << 28)
+#define PSC_AC97CFG_TT_FIFO8	(3 << 28)
+
+#define PSC_AC97CFG_DD_DISABLE	(1 << 27)
+#define PSC_AC97CFG_DE_ENABLE	(1 << 26)
+#define PSC_AC97CFG_SE_ENABLE	(1 << 25)
+
+#define PSC_AC97CFG_LEN_MASK	(0xf << 21)
+#define PSC_AC97CFG_TXSLOT_MASK	(0x3ff << 11)
+#define PSC_AC97CFG_RXSLOT_MASK	(0x3ff << 1)
+#define PSC_AC97CFG_GE_ENABLE	(1)
+
+/* Enable slots 3-12. */
+#define PSC_AC97CFG_TXSLOT_ENA(x)	(1 << (((x) - 3) + 11))
+#define PSC_AC97CFG_RXSLOT_ENA(x)	(1 << (((x) - 3) + 1))
+
+/*
+ * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
+ * The only sensible numbers are 7, 9, or possibly 11.  Nah, just do the
+ * arithmetic in the macro.
+ */
+#define PSC_AC97CFG_SET_LEN(x)	(((((x) - 2) / 2) & 0xf) << 21)
+#define PSC_AC97CFG_GET_LEN(x)	(((((x) >> 21) & 0xf) * 2) + 2)
+
+/* AC97 Mask Register. */
+#define PSC_AC97MSK_GR		(1 << 25)
+#define PSC_AC97MSK_CD		(1 << 24)
+#define PSC_AC97MSK_RR		(1 << 13)
+#define PSC_AC97MSK_RO		(1 << 12)
+#define PSC_AC97MSK_RU		(1 << 11)
+#define PSC_AC97MSK_TR		(1 << 10)
+#define PSC_AC97MSK_TO		(1 << 9)
+#define PSC_AC97MSK_TU		(1 << 8)
+#define PSC_AC97MSK_RD		(1 << 5)
+#define PSC_AC97MSK_TD		(1 << 4)
+#define PSC_AC97MSK_ALLMASK	(PSC_AC97MSK_GR | PSC_AC97MSK_CD | \
+				 PSC_AC97MSK_RR | PSC_AC97MSK_RO | \
+				 PSC_AC97MSK_RU | PSC_AC97MSK_TR | \
+				 PSC_AC97MSK_TO | PSC_AC97MSK_TU | \
+				 PSC_AC97MSK_RD | PSC_AC97MSK_TD)
+
+/* AC97 Protocol Control Register. */
+#define PSC_AC97PCR_RC		(1 << 6)
+#define PSC_AC97PCR_RP		(1 << 5)
+#define PSC_AC97PCR_RS		(1 << 4)
+#define PSC_AC97PCR_TC		(1 << 2)
+#define PSC_AC97PCR_TP		(1 << 1)
+#define PSC_AC97PCR_TS		(1 << 0)
+
+/* AC97 Status register (read only). */
+#define PSC_AC97STAT_CB		(1 << 26)
+#define PSC_AC97STAT_CP		(1 << 25)
+#define PSC_AC97STAT_CR		(1 << 24)
+#define PSC_AC97STAT_RF		(1 << 13)
+#define PSC_AC97STAT_RE		(1 << 12)
+#define PSC_AC97STAT_RR		(1 << 11)
+#define PSC_AC97STAT_TF		(1 << 10)
+#define PSC_AC97STAT_TE		(1 << 9)
+#define PSC_AC97STAT_TR		(1 << 8)
+#define PSC_AC97STAT_RB		(1 << 5)
+#define PSC_AC97STAT_TB		(1 << 4)
+#define PSC_AC97STAT_DI		(1 << 2)
+#define PSC_AC97STAT_DR		(1 << 1)
+#define PSC_AC97STAT_SR		(1 << 0)
+
+/* AC97 Event Register. */
+#define PSC_AC97EVNT_GR		(1 << 25)
+#define PSC_AC97EVNT_CD		(1 << 24)
+#define PSC_AC97EVNT_RR		(1 << 13)
+#define PSC_AC97EVNT_RO		(1 << 12)
+#define PSC_AC97EVNT_RU		(1 << 11)
+#define PSC_AC97EVNT_TR		(1 << 10)
+#define PSC_AC97EVNT_TO		(1 << 9)
+#define PSC_AC97EVNT_TU		(1 << 8)
+#define PSC_AC97EVNT_RD		(1 << 5)
+#define PSC_AC97EVNT_TD		(1 << 4)
+
+/* CODEC Command Register. */
+#define PSC_AC97CDC_RD		(1 << 25)
+#define PSC_AC97CDC_ID_MASK	(3 << 23)
+#define PSC_AC97CDC_INDX_MASK	(0x7f << 16)
+#define PSC_AC97CDC_ID(x)	(((x) & 0x03) << 23)
+#define PSC_AC97CDC_INDX(x)	(((x) & 0x7f) << 16)
+
+/* AC97 Reset Control Register. */
+#define PSC_AC97RST_RST		(1 << 1)
+#define PSC_AC97RST_SNC		(1 << 0)
+
+/* PSC in I2S Mode. */
+typedef struct	psc_i2s {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_i2scfg;
+	u32	psc_i2smsk;
+	u32	psc_i2spcr;
+	u32	psc_i2sstat;
+	u32	psc_i2sevent;
+	u32	psc_i2stxrx;
+	u32	psc_i2sudf;
+} psc_i2s_t;
+
+#define PSC_I2SCFG_OFFSET	0x08
+#define PSC_I2SMASK_OFFSET	0x0C
+#define PSC_I2SPCR_OFFSET	0x10
+#define PSC_I2SSTAT_OFFSET	0x14
+#define PSC_I2SEVENT_OFFSET	0x18
+#define PSC_I2SRXTX_OFFSET	0x1C
+#define PSC_I2SUDF_OFFSET	0x20
+
+/* I2S Config Register. */
+#define PSC_I2SCFG_RT_MASK	(3 << 30)
+#define PSC_I2SCFG_RT_FIFO1	(0 << 30)
+#define PSC_I2SCFG_RT_FIFO2	(1 << 30)
+#define PSC_I2SCFG_RT_FIFO4	(2 << 30)
+#define PSC_I2SCFG_RT_FIFO8	(3 << 30)
+
+#define PSC_I2SCFG_TT_MASK	(3 << 28)
+#define PSC_I2SCFG_TT_FIFO1	(0 << 28)
+#define PSC_I2SCFG_TT_FIFO2	(1 << 28)
+#define PSC_I2SCFG_TT_FIFO4	(2 << 28)
+#define PSC_I2SCFG_TT_FIFO8	(3 << 28)
+
+#define PSC_I2SCFG_DD_DISABLE	(1 << 27)
+#define PSC_I2SCFG_DE_ENABLE	(1 << 26)
+#define PSC_I2SCFG_SET_WS(x)	(((((x) / 2) - 1) & 0x7f) << 16)
+#define PSC_I2SCFG_WS(n)	((n & 0xFF) << 16)
+#define PSC_I2SCFG_WS_MASK	(PSC_I2SCFG_WS(0x3F))
+#define PSC_I2SCFG_WI		(1 << 15)
+
+#define PSC_I2SCFG_DIV_MASK	(3 << 13)
+#define PSC_I2SCFG_DIV2		(0 << 13)
+#define PSC_I2SCFG_DIV4		(1 << 13)
+#define PSC_I2SCFG_DIV8		(2 << 13)
+#define PSC_I2SCFG_DIV16	(3 << 13)
+
+#define PSC_I2SCFG_BI		(1 << 12)
+#define PSC_I2SCFG_BUF		(1 << 11)
+#define PSC_I2SCFG_MLJ		(1 << 10)
+#define PSC_I2SCFG_XM		(1 << 9)
+
+/* The word length equation is simply LEN+1. */
+#define PSC_I2SCFG_SET_LEN(x)	((((x) - 1) & 0x1f) << 4)
+#define PSC_I2SCFG_GET_LEN(x)	((((x) >> 4) & 0x1f) + 1)
+
+#define PSC_I2SCFG_LB		(1 << 2)
+#define PSC_I2SCFG_MLF		(1 << 1)
+#define PSC_I2SCFG_MS		(1 << 0)
+
+/* I2S Mask Register. */
+#define PSC_I2SMSK_RR		(1 << 13)
+#define PSC_I2SMSK_RO		(1 << 12)
+#define PSC_I2SMSK_RU		(1 << 11)
+#define PSC_I2SMSK_TR		(1 << 10)
+#define PSC_I2SMSK_TO		(1 << 9)
+#define PSC_I2SMSK_TU		(1 << 8)
+#define PSC_I2SMSK_RD		(1 << 5)
+#define PSC_I2SMSK_TD		(1 << 4)
+#define PSC_I2SMSK_ALLMASK	(PSC_I2SMSK_RR | PSC_I2SMSK_RO | \
+				 PSC_I2SMSK_RU | PSC_I2SMSK_TR | \
+				 PSC_I2SMSK_TO | PSC_I2SMSK_TU | \
+				 PSC_I2SMSK_RD | PSC_I2SMSK_TD)
+
+/* I2S Protocol Control Register. */
+#define PSC_I2SPCR_RC		(1 << 6)
+#define PSC_I2SPCR_RP		(1 << 5)
+#define PSC_I2SPCR_RS		(1 << 4)
+#define PSC_I2SPCR_TC		(1 << 2)
+#define PSC_I2SPCR_TP		(1 << 1)
+#define PSC_I2SPCR_TS		(1 << 0)
+
+/* I2S Status register (read only). */
+#define PSC_I2SSTAT_RF		(1 << 13)
+#define PSC_I2SSTAT_RE		(1 << 12)
+#define PSC_I2SSTAT_RR		(1 << 11)
+#define PSC_I2SSTAT_TF		(1 << 10)
+#define PSC_I2SSTAT_TE		(1 << 9)
+#define PSC_I2SSTAT_TR		(1 << 8)
+#define PSC_I2SSTAT_RB		(1 << 5)
+#define PSC_I2SSTAT_TB		(1 << 4)
+#define PSC_I2SSTAT_DI		(1 << 2)
+#define PSC_I2SSTAT_DR		(1 << 1)
+#define PSC_I2SSTAT_SR		(1 << 0)
+
+/* I2S Event Register. */
+#define PSC_I2SEVNT_RR		(1 << 13)
+#define PSC_I2SEVNT_RO		(1 << 12)
+#define PSC_I2SEVNT_RU		(1 << 11)
+#define PSC_I2SEVNT_TR		(1 << 10)
+#define PSC_I2SEVNT_TO		(1 << 9)
+#define PSC_I2SEVNT_TU		(1 << 8)
+#define PSC_I2SEVNT_RD		(1 << 5)
+#define PSC_I2SEVNT_TD		(1 << 4)
+
+/* PSC in SPI Mode. */
+typedef struct	psc_spi {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_spicfg;
+	u32	psc_spimsk;
+	u32	psc_spipcr;
+	u32	psc_spistat;
+	u32	psc_spievent;
+	u32	psc_spitxrx;
+} psc_spi_t;
+
+/* SPI Config Register. */
+#define PSC_SPICFG_RT_MASK	(3 << 30)
+#define PSC_SPICFG_RT_FIFO1	(0 << 30)
+#define PSC_SPICFG_RT_FIFO2	(1 << 30)
+#define PSC_SPICFG_RT_FIFO4	(2 << 30)
+#define PSC_SPICFG_RT_FIFO8	(3 << 30)
+
+#define PSC_SPICFG_TT_MASK	(3 << 28)
+#define PSC_SPICFG_TT_FIFO1	(0 << 28)
+#define PSC_SPICFG_TT_FIFO2	(1 << 28)
+#define PSC_SPICFG_TT_FIFO4	(2 << 28)
+#define PSC_SPICFG_TT_FIFO8	(3 << 28)
+
+#define PSC_SPICFG_DD_DISABLE	(1 << 27)
+#define PSC_SPICFG_DE_ENABLE	(1 << 26)
+#define PSC_SPICFG_CLR_BAUD(x)	((x) & ~((0x3f) << 15))
+#define PSC_SPICFG_SET_BAUD(x)	(((x) & 0x3f) << 15)
+
+#define PSC_SPICFG_SET_DIV(x)	(((x) & 0x03) << 13)
+#define PSC_SPICFG_DIV2		0
+#define PSC_SPICFG_DIV4		1
+#define PSC_SPICFG_DIV8		2
+#define PSC_SPICFG_DIV16	3
+
+#define PSC_SPICFG_BI		(1 << 12)
+#define PSC_SPICFG_PSE		(1 << 11)
+#define PSC_SPICFG_CGE		(1 << 10)
+#define PSC_SPICFG_CDE		(1 << 9)
+
+#define PSC_SPICFG_CLR_LEN(x)	((x) & ~((0x1f) << 4))
+#define PSC_SPICFG_SET_LEN(x)	(((x-1) & 0x1f) << 4)
+
+#define PSC_SPICFG_LB		(1 << 3)
+#define PSC_SPICFG_MLF		(1 << 1)
+#define PSC_SPICFG_MO		(1 << 0)
+
+/* SPI Mask Register. */
+#define PSC_SPIMSK_MM		(1 << 16)
+#define PSC_SPIMSK_RR		(1 << 13)
+#define PSC_SPIMSK_RO		(1 << 12)
+#define PSC_SPIMSK_RU		(1 << 11)
+#define PSC_SPIMSK_TR		(1 << 10)
+#define PSC_SPIMSK_TO		(1 << 9)
+#define PSC_SPIMSK_TU		(1 << 8)
+#define PSC_SPIMSK_SD		(1 << 5)
+#define PSC_SPIMSK_MD		(1 << 4)
+#define PSC_SPIMSK_ALLMASK	(PSC_SPIMSK_MM | PSC_SPIMSK_RR | \
+				 PSC_SPIMSK_RO | PSC_SPIMSK_TO | \
+				 PSC_SPIMSK_TU | PSC_SPIMSK_SD | \
+				 PSC_SPIMSK_MD)
+
+/* SPI Protocol Control Register. */
+#define PSC_SPIPCR_RC		(1 << 6)
+#define PSC_SPIPCR_SP		(1 << 5)
+#define PSC_SPIPCR_SS		(1 << 4)
+#define PSC_SPIPCR_TC		(1 << 2)
+#define PSC_SPIPCR_MS		(1 << 0)
+
+/* SPI Status register (read only). */
+#define PSC_SPISTAT_RF		(1 << 13)
+#define PSC_SPISTAT_RE		(1 << 12)
+#define PSC_SPISTAT_RR		(1 << 11)
+#define PSC_SPISTAT_TF		(1 << 10)
+#define PSC_SPISTAT_TE		(1 << 9)
+#define PSC_SPISTAT_TR		(1 << 8)
+#define PSC_SPISTAT_SB		(1 << 5)
+#define PSC_SPISTAT_MB		(1 << 4)
+#define PSC_SPISTAT_DI		(1 << 2)
+#define PSC_SPISTAT_DR		(1 << 1)
+#define PSC_SPISTAT_SR		(1 << 0)
+
+/* SPI Event Register. */
+#define PSC_SPIEVNT_MM		(1 << 16)
+#define PSC_SPIEVNT_RR		(1 << 13)
+#define PSC_SPIEVNT_RO		(1 << 12)
+#define PSC_SPIEVNT_RU		(1 << 11)
+#define PSC_SPIEVNT_TR		(1 << 10)
+#define PSC_SPIEVNT_TO		(1 << 9)
+#define PSC_SPIEVNT_TU		(1 << 8)
+#define PSC_SPIEVNT_SD		(1 << 5)
+#define PSC_SPIEVNT_MD		(1 << 4)
+
+/* Transmit register control. */
+#define PSC_SPITXRX_LC		(1 << 29)
+#define PSC_SPITXRX_SR		(1 << 28)
+
+/* PSC in SMBus (I2C) Mode. */
+typedef struct	psc_smb {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_smbcfg;
+	u32	psc_smbmsk;
+	u32	psc_smbpcr;
+	u32	psc_smbstat;
+	u32	psc_smbevnt;
+	u32	psc_smbtxrx;
+	u32	psc_smbtmr;
+} psc_smb_t;
+
+/* SMBus Config Register. */
+#define PSC_SMBCFG_RT_MASK	(3 << 30)
+#define PSC_SMBCFG_RT_FIFO1	(0 << 30)
+#define PSC_SMBCFG_RT_FIFO2	(1 << 30)
+#define PSC_SMBCFG_RT_FIFO4	(2 << 30)
+#define PSC_SMBCFG_RT_FIFO8	(3 << 30)
+
+#define PSC_SMBCFG_TT_MASK	(3 << 28)
+#define PSC_SMBCFG_TT_FIFO1	(0 << 28)
+#define PSC_SMBCFG_TT_FIFO2	(1 << 28)
+#define PSC_SMBCFG_TT_FIFO4	(2 << 28)
+#define PSC_SMBCFG_TT_FIFO8	(3 << 28)
+
+#define PSC_SMBCFG_DD_DISABLE	(1 << 27)
+#define PSC_SMBCFG_DE_ENABLE	(1 << 26)
+
+#define PSC_SMBCFG_SET_DIV(x)	(((x) & 0x03) << 13)
+#define PSC_SMBCFG_DIV2		0
+#define PSC_SMBCFG_DIV4		1
+#define PSC_SMBCFG_DIV8		2
+#define PSC_SMBCFG_DIV16	3
+
+#define PSC_SMBCFG_GCE		(1 << 9)
+#define PSC_SMBCFG_SFM		(1 << 8)
+
+#define PSC_SMBCFG_SET_SLV(x)	(((x) & 0x7f) << 1)
+
+/* SMBus Mask Register. */
+#define PSC_SMBMSK_DN		(1 << 30)
+#define PSC_SMBMSK_AN		(1 << 29)
+#define PSC_SMBMSK_AL		(1 << 28)
+#define PSC_SMBMSK_RR		(1 << 13)
+#define PSC_SMBMSK_RO		(1 << 12)
+#define PSC_SMBMSK_RU		(1 << 11)
+#define PSC_SMBMSK_TR		(1 << 10)
+#define PSC_SMBMSK_TO		(1 << 9)
+#define PSC_SMBMSK_TU		(1 << 8)
+#define PSC_SMBMSK_SD		(1 << 5)
+#define PSC_SMBMSK_MD		(1 << 4)
+#define PSC_SMBMSK_ALLMASK	(PSC_SMBMSK_DN | PSC_SMBMSK_AN | \
+				 PSC_SMBMSK_AL | PSC_SMBMSK_RR | \
+				 PSC_SMBMSK_RO | PSC_SMBMSK_TO | \
+				 PSC_SMBMSK_TU | PSC_SMBMSK_SD | \
+				 PSC_SMBMSK_MD)
+
+/* SMBus Protocol Control Register. */
+#define PSC_SMBPCR_DC		(1 << 2)
+#define PSC_SMBPCR_MS		(1 << 0)
+
+/* SMBus Status register (read only). */
+#define PSC_SMBSTAT_BB		(1 << 28)
+#define PSC_SMBSTAT_RF		(1 << 13)
+#define PSC_SMBSTAT_RE		(1 << 12)
+#define PSC_SMBSTAT_RR		(1 << 11)
+#define PSC_SMBSTAT_TF		(1 << 10)
+#define PSC_SMBSTAT_TE		(1 << 9)
+#define PSC_SMBSTAT_TR		(1 << 8)
+#define PSC_SMBSTAT_SB		(1 << 5)
+#define PSC_SMBSTAT_MB		(1 << 4)
+#define PSC_SMBSTAT_DI		(1 << 2)
+#define PSC_SMBSTAT_DR		(1 << 1)
+#define PSC_SMBSTAT_SR		(1 << 0)
+
+/* SMBus Event Register. */
+#define PSC_SMBEVNT_DN		(1 << 30)
+#define PSC_SMBEVNT_AN		(1 << 29)
+#define PSC_SMBEVNT_AL		(1 << 28)
+#define PSC_SMBEVNT_RR		(1 << 13)
+#define PSC_SMBEVNT_RO		(1 << 12)
+#define PSC_SMBEVNT_RU		(1 << 11)
+#define PSC_SMBEVNT_TR		(1 << 10)
+#define PSC_SMBEVNT_TO		(1 << 9)
+#define PSC_SMBEVNT_TU		(1 << 8)
+#define PSC_SMBEVNT_SD		(1 << 5)
+#define PSC_SMBEVNT_MD		(1 << 4)
+#define PSC_SMBEVNT_ALLCLR	(PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | \
+				 PSC_SMBEVNT_AL | PSC_SMBEVNT_RR | \
+				 PSC_SMBEVNT_RO | PSC_SMBEVNT_TO | \
+				 PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \
+				 PSC_SMBEVNT_MD)
+
+/* Transmit register control. */
+#define PSC_SMBTXRX_RSR		(1 << 28)
+#define PSC_SMBTXRX_STP		(1 << 29)
+#define PSC_SMBTXRX_DATAMASK	0xff
+
+/* SMBus protocol timers register. */
+#define PSC_SMBTMR_SET_TH(x)	(((x) & 0x03) << 30)
+#define PSC_SMBTMR_SET_PS(x)	(((x) & 0x1f) << 25)
+#define PSC_SMBTMR_SET_PU(x)	(((x) & 0x1f) << 20)
+#define PSC_SMBTMR_SET_SH(x)	(((x) & 0x1f) << 15)
+#define PSC_SMBTMR_SET_SU(x)	(((x) & 0x1f) << 10)
+#define PSC_SMBTMR_SET_CL(x)	(((x) & 0x1f) << 5)
+#define PSC_SMBTMR_SET_CH(x)	(((x) & 0x1f) << 0)
+
+#endif /* _AU1000_PSC_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h
new file mode 100644
index 0000000..2dc61e0
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/gpio.h
@@ -0,0 +1,69 @@
+#ifndef _AU1XXX_GPIO_H_
+#define _AU1XXX_GPIO_H_
+
+#include <linux/types.h>
+
+#define AU1XXX_GPIO_BASE	200
+
+struct au1x00_gpio2 {
+	u32	dir;
+	u32	reserved;
+	u32	output;
+	u32	pinstate;
+	u32	inten;
+	u32	enable;
+};
+
+extern int au1xxx_gpio_get_value(unsigned gpio);
+extern void au1xxx_gpio_set_value(unsigned gpio, int value);
+extern int au1xxx_gpio_direction_input(unsigned gpio);
+extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	/* Not yet implemented */
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	/* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return au1xxx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return au1xxx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return au1xxx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	au1xxx_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _AU1XXX_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h
new file mode 100644
index 0000000..364cea2
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/ioremap.h
@@ -0,0 +1,42 @@
+/*
+ *	include/asm-mips/mach-au1x00/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_AU1X00_IOREMAP_H
+#define __ASM_MACH_AU1X00_IOREMAP_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+extern phys_t __fixup_bigphys_addr(phys_t, phys_t);
+#else
+static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+#endif
+
+/*
+ * Allow physical addresses to be fixed up to help 36-bit peripherals.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return __fixup_bigphys_addr(phys_addr, size);
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_AU1X00_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-au1x00/prom.h b/arch/mips/include/asm/mach-au1x00/prom.h
new file mode 100644
index 0000000..e387155
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/prom.h
@@ -0,0 +1,13 @@
+#ifndef __AU1X00_PROM_H
+#define __AU1X00_PROM_H
+
+extern int prom_argc;
+extern char **prom_argv;
+extern char **prom_envp;
+
+extern void prom_init_cmdline(void);
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *envname);
+extern int prom_get_ethernet_addr(char *ethernet_addr);
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/war.h b/arch/mips/include/asm/mach-au1x00/war.h
new file mode 100644
index 0000000..dd57d03
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_AU1X00_WAR_H
+#define __ASM_MIPS_MACH_AU1X00_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_AU1X00_WAR_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
new file mode 100644
index 0000000..d008f47
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_BCM47XX_H
+#define __ASM_BCM47XX_H
+
+/* SSB bus */
+extern struct ssb_bus ssb_bcm47xx;
+
+#endif /* __ASM_BCM47XX_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h
new file mode 100644
index 0000000..d8ff4cd
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -0,0 +1,58 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ */
+
+#ifndef __BCM47XX_GPIO_H
+#define __BCM47XX_GPIO_H
+
+#include <linux/ssb/ssb_embedded.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+
+#define BCM47XX_EXTIF_GPIO_LINES	5
+#define BCM47XX_CHIPCO_GPIO_LINES	16
+
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+extern int gpio_to_irq(unsigned gpio);
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio);
+}
+
+static int gpio_intmask(unsigned gpio, int value)
+{
+	return ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio,
+				value ? 1 << gpio : 0);
+}
+
+static int gpio_polarity(unsigned gpio, int value)
+{
+	return ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio,
+				 value ? 1 << gpio : 0);
+}
+
+
+/* cansleep wrappers */
+#include <asm-generic/gpio.h>
+
+#endif /* __BCM47XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/war.h b/arch/mips/include/asm/mach-bcm47xx/war.h
new file mode 100644
index 0000000..87cd465
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_BCM47XX_WAR_H
+#define __ASM_MIPS_MACH_BCM47XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_BCM47XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-cobalt/cobalt.h b/arch/mips/include/asm/mach-cobalt/cobalt.h
new file mode 100644
index 0000000..5b9fce7
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/cobalt.h
@@ -0,0 +1,22 @@
+/*
+ * The Cobalt board ID information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 Cobalt Microserver
+ * Copyright (C) 1997, 2003 Ralf Baechle
+ * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv)
+ */
+#ifndef __ASM_COBALT_H
+#define __ASM_COBALT_H
+
+extern int cobalt_board_id;
+
+#define COBALT_BRD_ID_QUBE1    0x3
+#define COBALT_BRD_ID_RAQ1     0x4
+#define COBALT_BRD_ID_QUBE2    0x5
+#define COBALT_BRD_ID_RAQ2     0x6
+
+#endif /* __ASM_COBALT_H */
diff --git a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
new file mode 100644
index 0000000..b3314cf
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_COBALT_CPU_FEATURE_OVERRIDES_H
+#define __ASM_COBALT_CPU_FEATURE_OVERRIDES_H
+
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_tx39_cache	0
+#define cpu_has_fpu		1
+#define cpu_has_32fpr		1
+#define cpu_has_counter		1
+#define cpu_has_watch		0
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_inclusive_pcaches	0
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	0
+
+#ifdef CONFIG_64BIT
+#define cpu_has_llsc            0
+#else
+#define cpu_has_llsc            1
+#endif
+
+#define cpu_has_mips16		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+#define cpu_has_vtag_icache	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_icache_snoops_remote_store	0
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_COBALT_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h
new file mode 100644
index 0000000..57c8c9a
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/irq.h
@@ -0,0 +1,57 @@
+/*
+ * Cobalt IRQ definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 Cobalt Microserver
+ * Copyright (C) 1997, 2003 Ralf Baechle
+ * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv)
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ */
+#ifndef _ASM_COBALT_IRQ_H
+#define _ASM_COBALT_IRQ_H
+
+/*
+ * i8259 interrupts used on Cobalt:
+ *
+ *	8  - RTC
+ *	9  - PCI slot
+ *	14 - IDE0
+ *	15 - IDE1(no connector on board)
+ */
+#define I8259A_IRQ_BASE			0
+
+#define PCISLOT_IRQ			(I8259A_IRQ_BASE + 9)
+
+/*
+ * CPU interrupts used on Cobalt:
+ *
+ *	0 - Software interrupt 0 (unused)
+ *	1 - Software interrupt 0 (unused)
+ *	2 - cascade GT64111
+ *	3 - ethernet or SCSI host controller
+ *	4 - ethernet
+ *	5 - 16550 UART
+ *	6 - cascade i8259
+ *	7 - CP0 counter
+ */
+#define MIPS_CPU_IRQ_BASE		16
+
+#define GT641XX_CASCADE_IRQ		(MIPS_CPU_IRQ_BASE + 2)
+#define RAQ2_SCSI_IRQ			(MIPS_CPU_IRQ_BASE + 3)
+#define ETH0_IRQ			(MIPS_CPU_IRQ_BASE + 3)
+#define QUBE1_ETH0_IRQ			(MIPS_CPU_IRQ_BASE + 4)
+#define ETH1_IRQ			(MIPS_CPU_IRQ_BASE + 4)
+#define SERIAL_IRQ			(MIPS_CPU_IRQ_BASE + 5)
+#define SCSI_IRQ			(MIPS_CPU_IRQ_BASE + 5)
+#define I8259_CASCADE_IRQ		(MIPS_CPU_IRQ_BASE + 6)
+
+#define GT641XX_IRQ_BASE		24
+
+#include <asm/irq_gt641xx.h>
+
+#define NR_IRQS					(GT641XX_PCI_INT3_IRQ + 1)
+
+#endif /* _ASM_COBALT_IRQ_H */
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
new file mode 100644
index 0000000..ae9c552
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef _COBALT_MACH_GT64120_H
+#define _COBALT_MACH_GT64120_H
+
+/*
+ * Cobalt uses GT64111. GT64111 is almost the same as GT64120.
+ */
+
+#define GT64120_BASE	CKSEG1ADDR(GT_DEF_BASE)
+
+#endif /* _COBALT_MACH_GT64120_H */
diff --git a/arch/mips/include/asm/mach-cobalt/war.h b/arch/mips/include/asm/mach-cobalt/war.h
new file mode 100644
index 0000000..97884fd
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_COBALT_WAR_H
+#define __ASM_MIPS_MACH_COBALT_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_COBALT_WAR_H */
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h
new file mode 100644
index 0000000..27f2610
--- /dev/null
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -0,0 +1,230 @@
+/*
+ * AMD Alchemy DBAu1200 Reference Board
+ * Board register defines.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1200_H
+#define __ASM_DB1200_H
+
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC1_RX
+
+/*
+ * SPI and SMB are muxed on the DBAu1200 board.
+ * Refer to board documentation.
+ */
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC0_BASE_ADDR
+/*
+ * AC'97 and I2S are muxed on the DBAu1200 board.
+ * Refer to board documentation.
+ */
+#define AC97_PSC_BASE		PSC1_BASE_ADDR
+#define I2S_PSC_BASE		PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 	0xB9800000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 board;
+		u16 reserved5;
+	/*18*/	u16 disk_leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+	/*20*/	u16 intclr;
+		u16 reserved8;
+	/*24*/	u16 intset;
+		u16 reserved9;
+	/*28*/	u16 intclr_mask;
+		u16 reserved10;
+	/*2C*/	u16 intset_mask;
+		u16 reserved11;
+
+	/*30*/	u16 sig_status;
+		u16 reserved12;
+	/*34*/	u16 int_status;
+		u16 reserved13;
+	/*38*/	u16 reserved14;
+		u16 reserved15;
+	/*3C*/	u16 reserved16;
+		u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_IDECBLID	0x0200
+#define BCSR_STATUS_SD0WP	0x0400
+#define BCSR_STATUS_U0RXD	0x1000
+#define BCSR_STATUS_U1RXD	0x2000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_ETH		0x0001
+#define BCSR_RESETS_CAMERA	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_IDE		0x0008
+#define BCSR_RESETS_TV		0x0010
+/* Not resets but in the same register */
+#define BCSR_RESETS_PWMR1MUX	0x0800
+#define BCSR_RESETS_PCS0MUX	0x1000
+#define BCSR_RESETS_PCS1MUX	0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_BOARD_LCDVEE	0x0001
+#define BCSR_BOARD_LCDVDD	0x0002
+#define BCSR_BOARD_LCDBL	0x0004
+#define BCSR_BOARD_CAMSNAP	0x0010
+#define BCSR_BOARD_CAMPWR	0x0020
+#define BCSR_BOARD_SD0PWR	0x0040
+
+#define BCSR_LEDS_DECIMALS	0x0003
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE		0x0001
+#define BCSR_INT_ETH		0x0002
+#define BCSR_INT_PC0		0x0004
+#define BCSR_INT_PC0STSCHG	0x0008
+#define BCSR_INT_PC1		0x0010
+#define BCSR_INT_PC1STSCHG	0x0020
+#define BCSR_INT_DC		0x0040
+#define BCSR_INT_FLASHBUSY	0x0080
+#define BCSR_INT_PC0INSERT	0x0100
+#define BCSR_INT_PC0EJECT	0x0200
+#define BCSR_INT_PC1INSERT	0x0400
+#define BCSR_INT_PC1EJECT	0x0800
+#define BCSR_INT_SD0INSERT	0x1000
+#define BCSR_INT_SD0EJECT	0x2000
+
+#define SMC91C111_PHYS_ADDR	0x19000300
+#define SMC91C111_INT		DB1200_ETH_INT
+
+#define IDE_PHYS_ADDR		0x18800000
+#define IDE_REG_SHIFT		5
+#define IDE_PHYS_LEN		(16 << IDE_REG_SHIFT)
+#define IDE_INT 		DB1200_IDE_INT
+#define IDE_DDMA_REQ		DSCR_CMD0_DMA_REQ1
+#define IDE_RQSIZE		128
+
+#define NAND_PHYS_ADDR		0x20000000
+
+/*
+ * External Interrupts for DBAu1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the DB1200_INT_BEGIN value.
+ *
+ *   Example: IDE bis pos is  = 64 - 64
+ *            ETH bit pos is  = 65 - 64
+ */
+enum external_pb1200_ints {
+	DB1200_INT_BEGIN	= AU1000_MAX_INTR + 1,
+
+	DB1200_IDE_INT		= DB1200_INT_BEGIN,
+	DB1200_ETH_INT,
+	DB1200_PC0_INT,
+	DB1200_PC0_STSCHG_INT,
+	DB1200_PC1_INT,
+	DB1200_PC1_STSCHG_INT,
+	DB1200_DC_INT,
+	DB1200_FLASHBUSY_INT,
+	DB1200_PC0_INSERT_INT,
+	DB1200_PC0_EJECT_INT,
+	DB1200_PC1_INSERT_INT,
+	DB1200_PC1_EJECT_INT,
+	DB1200_SD0_INSERT_INT,
+	DB1200_SD0_EJECT_INT,
+
+	DB1200_INT_END		= DB1200_INT_BEGIN + 15,
+};
+
+
+/*
+ * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT	DB1200_PC0_INT
+#define BOARD_PC1_INT	DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
+#define NAND_CS 1
+
+#endif /* __ASM_DB1200_H */
diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h
new file mode 100644
index 0000000..1a515b8
--- /dev/null
+++ b/arch/mips/include/asm/mach-db1x00/db1x00.h
@@ -0,0 +1,179 @@
+/*
+ * AMD Alchemy DBAu1x00 Reference Boards
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1X00_H
+#define __ASM_DB1X00_H
+
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#ifdef CONFIG_MIPS_DB1550
+
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC3_RX
+
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define AC97_PSC_BASE		PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC2_BASE_ADDR
+#define I2S_PSC_BASE		PSC3_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 	0xAF000000
+#define NAND_PHYS_ADDR		0x20000000
+
+#else
+#define BCSR_KSEG1_ADDR 0xAE000000
+#endif
+
+/*
+ * Overlay data structure of the DBAu1x00 board registers.
+ * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
+ */
+typedef volatile struct
+{
+	/*00*/	unsigned short whoami;
+	unsigned short reserved0;
+	/*04*/	unsigned short status;
+	unsigned short reserved1;
+	/*08*/	unsigned short switches;
+	unsigned short reserved2;
+	/*0C*/	unsigned short resets;
+	unsigned short reserved3;
+	/*10*/	unsigned short pcmcia;
+	unsigned short reserved4;
+	/*14*/	unsigned short specific;
+	unsigned short reserved5;
+	/*18*/	unsigned short leds;
+	unsigned short reserved6;
+	/*1C*/	unsigned short swreset;
+	unsigned short reserved7;
+
+} BCSR;
+
+
+/*
+ * Register/mask bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID		0x000F
+#define BCSR_WHOAMI_CPLD		0x00F0
+#define BCSR_WHOAMI_BOARD		0x0F00
+
+#define BCSR_STATUS_PC0VS		0x0003
+#define BCSR_STATUS_PC1VS		0x000C
+#define BCSR_STATUS_PC0FI		0x0010
+#define BCSR_STATUS_PC1FI		0x0020
+#define BCSR_STATUS_FLASHBUSY		0x0100
+#define BCSR_STATUS_ROMBUSY		0x0400
+#define BCSR_STATUS_SWAPBOOT		0x2000
+#define BCSR_STATUS_FLASHDEN		0xC000
+
+#define BCSR_SWITCHES_DIP		0x00FF
+#define BCSR_SWITCHES_DIP_1		0x0080
+#define BCSR_SWITCHES_DIP_2		0x0040
+#define BCSR_SWITCHES_DIP_3		0x0020
+#define BCSR_SWITCHES_DIP_4		0x0010
+#define BCSR_SWITCHES_DIP_5		0x0008
+#define BCSR_SWITCHES_DIP_6		0x0004
+#define BCSR_SWITCHES_DIP_7		0x0002
+#define BCSR_SWITCHES_DIP_8		0x0001
+#define BCSR_SWITCHES_ROTARY		0x0F00
+
+#define BCSR_RESETS_PHY0		0x0001
+#define BCSR_RESETS_PHY1		0x0002
+#define BCSR_RESETS_DC			0x0004
+#define BCSR_RESETS_FIR_SEL		0x2000
+#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
+#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
+#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
+#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
+#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
+
+#define BCSR_PCMCIA_PC0VPP		0x0003
+#define BCSR_PCMCIA_PC0VCC		0x000C
+#define BCSR_PCMCIA_PC0DRVEN		0x0010
+#define BCSR_PCMCIA_PC0RST		0x0080
+#define BCSR_PCMCIA_PC1VPP		0x0300
+#define BCSR_PCMCIA_PC1VCC		0x0C00
+#define BCSR_PCMCIA_PC1DRVEN		0x1000
+#define BCSR_PCMCIA_PC1RST		0x8000
+
+#define BCSR_BOARD_PCIM66EN		0x0001
+#define BCSR_BOARD_SD0_PWR		0x0040
+#define BCSR_BOARD_SD1_PWR		0x0080
+#define BCSR_BOARD_PCIM33		0x0100
+#define BCSR_BOARD_GPIO200RST		0x0400
+#define BCSR_BOARD_PCICFG		0x1000
+#define BCSR_BOARD_SD0_WP		0x4000
+#define BCSR_BOARD_SD1_WP		0x8000
+
+#define BCSR_LEDS_DECIMALS		0x0003
+#define BCSR_LEDS_LED0			0x0100
+#define BCSR_LEDS_LED1			0x0200
+#define BCSR_LEDS_LED2			0x0400
+#define BCSR_LEDS_LED3			0x0800
+
+#define BCSR_SWRESET_RESET		0x0080
+
+/* PCMCIA DBAu1x00 specific defines */
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+/*
+ * NAND defines
+ *
+ * Timing values as described in databook, * ns value stripped of the
+ * lower 2 bits.
+ * These defines are here rather than an Au1550 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H		(18 >> 2)
+#define NAND_T_PUL		(30 >> 2)
+#define NAND_T_SU		(30 >> 2)
+#define NAND_T_WH		(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
+			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
+			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
+#define NAND_CS 	1
+
+/* Should be done by YAMON */
+#define NAND_STCFG	0x00400005 /* 8-bit NAND */
+#define NAND_STTIME	0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR	0x12000FFF /* physical address 0x20000000 */
+
+#endif /* __ASM_DB1X00_H */
diff --git a/arch/mips/include/asm/mach-dec/mc146818rtc.h b/arch/mips/include/asm/mach-dec/mc146818rtc.h
new file mode 100644
index 0000000..6724e99
--- /dev/null
+++ b/arch/mips/include/asm/mach-dec/mc146818rtc.h
@@ -0,0 +1,43 @@
+/*
+ * RTC definitions for DECstation style attached Dallas DS1287 chip.
+ *
+ * Copyright (C) 1998, 2001 by Ralf Baechle
+ * Copyright (C) 1998 by Harald Koerfgen
+ * Copyright (C) 2002, 2005  Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_RTC_DEC_H
+#define __ASM_MIPS_DEC_RTC_DEC_H
+
+#include <linux/types.h>
+#include <asm/addrspace.h>
+#include <asm/dec/system.h>
+
+extern volatile u8 *dec_rtc_base;
+
+#define ARCH_RTC_LOCATION
+
+#define RTC_PORT(x)	CPHYSADDR((long)dec_rtc_base)
+#define RTC_IO_EXTENT	dec_kn_slot_size
+#define RTC_IOMAPPED	0
+#undef RTC_IRQ
+
+#define RTC_DEC_YEAR	0x3f	/* Where we store the real year on DECs.  */
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	return dec_rtc_base[addr * 4];
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	dec_rtc_base[addr * 4] = data;
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#endif /* __ASM_MIPS_DEC_RTC_DEC_H */
diff --git a/arch/mips/include/asm/mach-dec/war.h b/arch/mips/include/asm/mach-dec/war.h
new file mode 100644
index 0000000..ca5e2ef
--- /dev/null
+++ b/arch/mips/include/asm/mach-dec/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_DEC_WAR_H
+#define __ASM_MIPS_MACH_DEC_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_DEC_WAR_H */
diff --git a/arch/mips/include/asm/mach-emma2rh/irq.h b/arch/mips/include/asm/mach-emma2rh/irq.h
new file mode 100644
index 0000000..5439eb8
--- /dev/null
+++ b/arch/mips/include/asm/mach-emma2rh/irq.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_EMMA2RH_IRQ_H
+#define __ASM_MACH_EMMA2RH_IRQ_H
+
+#define NR_IRQS	256
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_EMMA2RH_IRQ_H */
diff --git a/arch/mips/include/asm/mach-emma2rh/war.h b/arch/mips/include/asm/mach-emma2rh/war.h
new file mode 100644
index 0000000..b660a4c
--- /dev/null
+++ b/arch/mips/include/asm/mach-emma2rh/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_EMMA2RH_WAR_H
+#define __ASM_MIPS_MACH_EMMA2RH_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_EMMA2RH_WAR_H */
diff --git a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
new file mode 100644
index 0000000..107104c
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
@@ -0,0 +1,48 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com>
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Basler eXcite has an RM9122 processor.
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_icache_snoops_remote_store	0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-excite/excite.h b/arch/mips/include/asm/mach-excite/excite.h
new file mode 100644
index 0000000..4c29ba4
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/excite.h
@@ -0,0 +1,154 @@
+#ifndef __EXCITE_H__
+#define __EXCITE_H__
+
+#include <linux/init.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+
+#define EXCITE_CPU_EXT_CLOCK 100000000
+
+#if !defined(__ASSEMBLY__)
+void __init excite_kgdb_init(void);
+void excite_procfs_init(void);
+extern unsigned long memsize;
+extern char modetty[];
+extern u32 unit_id;
+#endif
+
+/* Base name for XICAP devices */
+#define XICAP_NAME	"xicap_gpi"
+
+/* OCD register offsets */
+#define LKB0		0x0038
+#define LKB5		0x0128
+#define LKM5		0x012C
+#define LKB7		0x0138
+#define LKM7		0x013c
+#define LKB8		0x0140
+#define LKM8		0x0144
+#define LKB9		0x0148
+#define LKM9		0x014c
+#define LKB10		0x0150
+#define LKM10		0x0154
+#define LKB11		0x0158
+#define LKM11		0x015c
+#define LKB12		0x0160
+#define LKM12		0x0164
+#define LKB13		0x0168
+#define LKM13		0x016c
+#define LDP0		0x0200
+#define LDP1		0x0210
+#define LDP2		0x0220
+#define LDP3		0x0230
+#define INTPIN0		0x0A40
+#define INTPIN1		0x0A44
+#define INTPIN2		0x0A48
+#define INTPIN3		0x0A4C
+#define INTPIN4		0x0A50
+#define INTPIN5		0x0A54
+#define INTPIN6		0x0A58
+#define INTPIN7		0x0A5C
+
+
+
+
+/* TITAN register offsets */
+#define CPRR		0x0004
+#define CPDSR		0x0008
+#define CPTC0R		0x000c
+#define CPTC1R		0x0010
+#define CPCFG0		0x0020
+#define CPCFG1		0x0024
+#define CPDST0A		0x0028
+#define CPDST0B		0x002c
+#define CPDST1A		0x0030
+#define CPDST1B		0x0034
+#define CPXDSTA		0x0038
+#define CPXDSTB		0x003c
+#define CPXCISRA	0x0048
+#define CPXCISRB	0x004c
+#define CPGIG0ER	0x0050
+#define CPGIG1ER	0x0054
+#define CPGRWL		0x0068
+#define CPURSLMT	0x00f8
+#define UACFG		0x0200
+#define UAINTS		0x0204
+#define SDRXFCIE	0x4828
+#define SDTXFCIE	0x4928
+#define INTP0Status0	0x1B00
+#define INTP0Mask0	0x1B04
+#define INTP0Set0	0x1B08
+#define INTP0Clear0	0x1B0C
+#define GXCFG		0x5000
+#define GXDMADRPFX	0x5018
+#define GXDMA_DESCADR	0x501c
+#define GXCH0TDESSTRT	0x5054
+
+/* IRQ definitions */
+#define NMICONFIG		0xac0
+#define TITAN_MSGINT	0xc4
+#define TITAN_IRQ	((TITAN_MSGINT / 0x20) + 2)
+#define FPGA0_MSGINT	0x5a
+#define FPGA0_IRQ	((FPGA0_MSGINT / 0x20) + 2)
+#define FPGA1_MSGINT	0x7b
+#define FPGA1_IRQ	((FPGA1_MSGINT / 0x20) + 2)
+#define PHY_MSGINT	0x9c
+#define PHY_IRQ		((PHY_MSGINT   / 0x20) + 2)
+
+#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE)
+/* Pre-release units used interrupt pin #9 */
+#define USB_IRQ		11
+#else
+/* Re-designed units use interrupt pin #1 */
+#define USB_MSGINT	0x39
+#define USB_IRQ		((USB_MSGINT / 0x20) + 2)
+#endif
+#define TIMER_IRQ	12
+
+
+/* Device address ranges */
+#define EXCITE_OFFS_OCD		0x1fffc000
+#define	EXCITE_SIZE_OCD		(16 * 1024)
+#define EXCITE_PHYS_OCD		CPHYSADDR(EXCITE_OFFS_OCD)
+#define EXCITE_ADDR_OCD		CKSEG1ADDR(EXCITE_OFFS_OCD)
+
+#define EXCITE_OFFS_SCRAM 	0x1fffa000
+#define	EXCITE_SIZE_SCRAM	(8 << 10)
+#define EXCITE_PHYS_SCRAM 	CPHYSADDR(EXCITE_OFFS_SCRAM)
+#define EXCITE_ADDR_SCRAM 	CKSEG1ADDR(EXCITE_OFFS_SCRAM)
+
+#define EXCITE_OFFS_PCI_IO	0x1fff8000
+#define	EXCITE_SIZE_PCI_IO	(8 << 10)
+#define EXCITE_PHYS_PCI_IO	CPHYSADDR(EXCITE_OFFS_PCI_IO)
+#define EXCITE_ADDR_PCI_IO 	CKSEG1ADDR(EXCITE_OFFS_PCI_IO)
+
+#define EXCITE_OFFS_TITAN	0x1fff0000
+#define EXCITE_SIZE_TITAN	(32 << 10)
+#define EXCITE_PHYS_TITAN	CPHYSADDR(EXCITE_OFFS_TITAN)
+#define EXCITE_ADDR_TITAN	CKSEG1ADDR(EXCITE_OFFS_TITAN)
+
+#define EXCITE_OFFS_PCI_MEM	0x1ffe0000
+#define EXCITE_SIZE_PCI_MEM	(64 << 10)
+#define EXCITE_PHYS_PCI_MEM	CPHYSADDR(EXCITE_OFFS_PCI_MEM)
+#define EXCITE_ADDR_PCI_MEM	CKSEG1ADDR(EXCITE_OFFS_PCI_MEM)
+
+#define EXCITE_OFFS_FPGA	0x1ffdc000
+#define EXCITE_SIZE_FPGA	(16 << 10)
+#define EXCITE_PHYS_FPGA	CPHYSADDR(EXCITE_OFFS_FPGA)
+#define EXCITE_ADDR_FPGA	CKSEG1ADDR(EXCITE_OFFS_FPGA)
+
+#define EXCITE_OFFS_NAND	0x1ffd8000
+#define EXCITE_SIZE_NAND	(16 << 10)
+#define EXCITE_PHYS_NAND	CPHYSADDR(EXCITE_OFFS_NAND)
+#define EXCITE_ADDR_NAND	CKSEG1ADDR(EXCITE_OFFS_NAND)
+
+#define EXCITE_OFFS_BOOTROM	0x1f000000
+#define EXCITE_SIZE_BOOTROM	(8 << 20)
+#define EXCITE_PHYS_BOOTROM	CPHYSADDR(EXCITE_OFFS_BOOTROM)
+#define EXCITE_ADDR_BOOTROM	CKSEG1ADDR(EXCITE_OFFS_BOOTROM)
+
+/* FPGA address offsets */
+#define EXCITE_FPGA_DPR		0x0104	/* dual-ported ram */
+#define EXCITE_FPGA_SYSCTL	0x0200	/* system control register block */
+
+#endif /* __EXCITE_H__ */
diff --git a/arch/mips/include/asm/mach-excite/excite_fpga.h b/arch/mips/include/asm/mach-excite/excite_fpga.h
new file mode 100644
index 0000000..0a1ef69
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/excite_fpga.h
@@ -0,0 +1,80 @@
+#ifndef EXCITE_FPGA_H_INCLUDED
+#define EXCITE_FPGA_H_INCLUDED
+
+
+/**
+ * Address alignment of the individual FPGA bytes.
+ * The address arrangement of the individual bytes of the FPGA is two
+ * byte aligned at the embedded MK2 platform.
+ */
+#ifdef EXCITE_CCI_FPGA_MK2
+typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2)));
+#else
+typedef unsigned char excite_cci_fpga_align_t;
+#endif
+
+
+/**
+ * Size of Dual Ported RAM.
+ */
+#define EXCITE_DPR_SIZE 263
+
+
+/**
+ * Size of Reserved Status Fields in Dual Ported RAM.
+ */
+#define EXCITE_DPR_STATUS_SIZE 7
+
+
+
+/**
+ * FPGA.
+ * Hardware register layout of the FPGA interface. The FPGA must accessed
+ * byte wise solely.
+ * @see EXCITE_CCI_DPR_MK2
+ */
+typedef struct excite_fpga {
+
+	/**
+	 * Dual Ported RAM.
+	 */
+	excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE];
+
+	/**
+	 * Status.
+	 */
+	excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE];
+
+#ifdef EXCITE_CCI_FPGA_MK2
+	/**
+	 * RM9000 Interrupt.
+	 * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite.
+	 */
+	excite_cci_fpga_align_t rm9k_int;
+#else
+	/**
+	 * MK2 Interrupt.
+	 * Write access initiates interrupt at the ARM processor of the MK2.
+	 */
+	excite_cci_fpga_align_t mk2_int;
+
+	excite_cci_fpga_align_t gap[0x1000-0x10f];
+
+	/**
+	 * IRQ Source/Acknowledge.
+	 */
+	excite_cci_fpga_align_t rm9k_irq_src;
+
+	/**
+	 * IRQ Mask.
+	 * Set bits enable the related interrupt.
+	 */
+	excite_cci_fpga_align_t rm9k_irq_mask;
+#endif
+
+
+} excite_fpga;
+
+
+
+#endif	/* ndef EXCITE_FPGA_H_INCLUDED */
diff --git a/arch/mips/include/asm/mach-excite/excite_nandflash.h b/arch/mips/include/asm/mach-excite/excite_nandflash.h
new file mode 100644
index 0000000..c4cf614
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/excite_nandflash.h
@@ -0,0 +1,7 @@
+#ifndef __EXCITE_NANDFLASH_H__
+#define __EXCITE_NANDFLASH_H__
+
+/* Resource names */
+#define EXCITE_NANDFLASH_RESOURCE_REGS	"excite_nandflash_regs"
+
+#endif /* __EXCITE_NANDFLASH_H__ */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_eth.h b/arch/mips/include/asm/mach-excite/rm9k_eth.h
new file mode 100644
index 0000000..94705a4
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/rm9k_eth.h
@@ -0,0 +1,23 @@
+#if !defined(__RM9K_ETH_H__)
+#define __RM9K_ETH_H__
+
+#define RM9K_GE_NAME			"rm9k_ge"
+
+/* Resource names */
+#define RM9K_GE_RESOURCE_MAC      	"rm9k_ge_mac"
+#define RM9K_GE_RESOURCE_MSTAT      	"rm9k_ge_mstat"
+#define RM9K_GE_RESOURCE_PKTPROC	"rm9k_ge_pktproc"
+#define RM9K_GE_RESOURCE_XDMA		"rm9k_ge_xdma"
+#define RM9K_GE_RESOURCE_FIFO_RX  	"rm9k_ge_fifo_rx"
+#define RM9K_GE_RESOURCE_FIFO_TX  	"rm9k_ge_fifo_tx"
+#define RM9K_GE_RESOURCE_FIFOMEM_RX  	"rm9k_ge_fifo_memory_rx"
+#define RM9K_GE_RESOURCE_FIFOMEM_TX  	"rm9k_ge_fifo_memory_tx"
+#define RM9K_GE_RESOURCE_PHY      	"rm9k_ge_phy"
+#define RM9K_GE_RESOURCE_DMADESC_RX  	"rm9k_ge_dmadesc_rx"
+#define RM9K_GE_RESOURCE_DMADESC_TX  	"rm9k_ge_dmadesc_tx"
+#define RM9K_GE_RESOURCE_IRQ_MAIN	"rm9k_ge_irq_main"
+#define RM9K_GE_RESOURCE_IRQ_PHY	"rm9k_ge_irq_phy"
+#define RM9K_GE_RESOURCE_GPI_SLICE	"rm9k_ge_gpi_slice"
+#define RM9K_GE_RESOURCE_MDIO_CHANNEL	"rm9k_ge_mdio_channel"
+
+#endif /* !defined(__RM9K_ETH_H__) */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/arch/mips/include/asm/mach-excite/rm9k_wdt.h
new file mode 100644
index 0000000..3fa3c08
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/rm9k_wdt.h
@@ -0,0 +1,12 @@
+#ifndef __RM9K_WDT_H__
+#define __RM9K_WDT_H__
+
+/* Device name */
+#define WDT_NAME		"wdt_gpi"
+
+/* Resource names */
+#define WDT_RESOURCE_REGS	"excite_watchdog_regs"
+#define WDT_RESOURCE_IRQ	"excite_watchdog_irq"
+#define WDT_RESOURCE_COUNTER	"excite_watchdog_counter"
+
+#endif /* __RM9K_WDT_H__ */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/arch/mips/include/asm/mach-excite/rm9k_xicap.h
new file mode 100644
index 0000000..0095777
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/rm9k_xicap.h
@@ -0,0 +1,16 @@
+#ifndef __EXCITE_XICAP_H__
+#define __EXCITE_XICAP_H__
+
+
+/* Resource names */
+#define XICAP_RESOURCE_FIFO_RX		"xicap_fifo_rx"
+#define XICAP_RESOURCE_FIFO_TX		"xicap_fifo_tx"
+#define XICAP_RESOURCE_XDMA 		"xicap_xdma"
+#define XICAP_RESOURCE_DMADESC		"xicap_dmadesc"
+#define XICAP_RESOURCE_PKTPROC  	"xicap_pktproc"
+#define XICAP_RESOURCE_IRQ		"xicap_irq"
+#define XICAP_RESOURCE_GPI_SLICE	"xicap_gpi_slice"
+#define XICAP_RESOURCE_FIFO_BLK		"xicap_fifo_blocks"
+#define XICAP_RESOURCE_PKT_STREAM	"xicap_pkt_stream"
+
+#endif /* __EXCITE_XICAP_H__ */
diff --git a/arch/mips/include/asm/mach-excite/war.h b/arch/mips/include/asm/mach-excite/war.h
new file mode 100644
index 0000000..1f82180
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H
+#define __ASM_MIPS_MACH_EXCITE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		1
+#define ICACHE_REFILLS_WORKAROUND_WAR   1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR	0
+
+#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */
diff --git a/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h
new file mode 100644
index 0000000..7c185bb
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
+
+/* Intentionally empty file ...  */
+
+#endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
new file mode 100644
index 0000000..76e04e7
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+	size_t size)
+{
+	return virt_to_phys(addr);
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+	struct page *page)
+{
+	return page_to_phys(page);
+}
+
+static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return dma_addr;
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+#ifdef CONFIG_DMA_COHERENT
+	return 1;
+#endif
+#ifdef CONFIG_DMA_NONCOHERENT
+	return 0;
+#endif
+}
+
+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h
new file mode 100644
index 0000000..001a8ce
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/floppy.h
@@ -0,0 +1,139 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_FLOPPY_H
+#define __ASM_MACH_GENERIC_FLOPPY_H
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+#include <asm/cachectl.h>
+#include <asm/dma.h>
+#include <asm/floppy.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pgtable.h>
+
+/*
+ * How to access the FDC's registers.
+ */
+static inline unsigned char fd_inb(unsigned int port)
+{
+	return inb_p(port);
+}
+
+static inline void fd_outb(unsigned char value, unsigned int port)
+{
+	outb_p(value, port);
+}
+
+/*
+ * How to access the floppy DMA functions.
+ */
+static inline void fd_enable_dma(void)
+{
+	enable_dma(FLOPPY_DMA);
+}
+
+static inline void fd_disable_dma(void)
+{
+	disable_dma(FLOPPY_DMA);
+}
+
+static inline int fd_request_dma(void)
+{
+	return request_dma(FLOPPY_DMA, "floppy");
+}
+
+static inline void fd_free_dma(void)
+{
+	free_dma(FLOPPY_DMA);
+}
+
+static inline void fd_clear_dma_ff(void)
+{
+	clear_dma_ff(FLOPPY_DMA);
+}
+
+static inline void fd_set_dma_mode(char mode)
+{
+	set_dma_mode(FLOPPY_DMA, mode);
+}
+
+static inline void fd_set_dma_addr(char *addr)
+{
+	set_dma_addr(FLOPPY_DMA, (unsigned long) addr);
+}
+
+static inline void fd_set_dma_count(unsigned int count)
+{
+	set_dma_count(FLOPPY_DMA, count);
+}
+
+static inline int fd_get_dma_residue(void)
+{
+	return get_dma_residue(FLOPPY_DMA);
+}
+
+static inline void fd_enable_irq(void)
+{
+	enable_irq(FLOPPY_IRQ);
+}
+
+static inline void fd_disable_irq(void)
+{
+	disable_irq(FLOPPY_IRQ);
+}
+
+static inline int fd_request_irq(void)
+{
+	return request_irq(FLOPPY_IRQ, floppy_interrupt,
+	                   IRQF_DISABLED, "floppy", NULL);
+}
+
+static inline void fd_free_irq(void)
+{
+	free_irq(FLOPPY_IRQ, NULL);
+}
+
+#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+
+
+static inline unsigned long fd_getfdaddr1(void)
+{
+	return 0x3f0;
+}
+
+static inline unsigned long fd_dma_mem_alloc(unsigned long size)
+{
+	unsigned long mem;
+
+	mem = __get_dma_pages(GFP_KERNEL, get_order(size));
+
+	return mem;
+}
+
+static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	free_pages(addr, get_order(size));
+}
+
+static inline unsigned long fd_drive_type(unsigned long n)
+{
+	if (n == 0)
+		return 4;	/* 3,5", 1.44mb */
+
+	return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_FLOPPY_H */
diff --git a/arch/mips/include/asm/mach-generic/gpio.h b/arch/mips/include/asm/mach-generic/gpio.h
new file mode 100644
index 0000000..b4e7020
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/gpio.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_GENERIC_GPIO_H
+#define __ASM_MACH_GENERIC_GPIO_H
+
+#ifdef CONFIG_GPIOLIB
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#else
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+#endif
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#endif /* __ASM_MACH_GENERIC_GPIO_H */
diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h
new file mode 100644
index 0000000..9c93a5b
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/ide.h
@@ -0,0 +1,138 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994-1996  Linus Torvalds & authors
+ *
+ * Copied from i386; many of the especially older MIPS or ISA-based platforms
+ * are basically identical.  Using this file probably implies i8259 PIC
+ * support in a system but the very least interrupt numbers 0 - 15 need to
+ * be put aside for legacy devices.
+ */
+#ifndef __ASM_MACH_GENERIC_IDE_H
+#define __ASM_MACH_GENERIC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/pci.h>
+#include <linux/stddef.h>
+#include <asm/processor.h>
+
+/* MIPS port and memory-mapped I/O string operations.  */
+static inline void __ide_flush_prologue(void)
+{
+#ifdef CONFIG_SMP
+	if (cpu_has_dc_aliases)
+		preempt_disable();
+#endif
+}
+
+static inline void __ide_flush_epilogue(void)
+{
+#ifdef CONFIG_SMP
+	if (cpu_has_dc_aliases)
+		preempt_enable();
+#endif
+}
+
+static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
+{
+	if (cpu_has_dc_aliases) {
+		unsigned long end = addr + size;
+
+		while (addr < end) {
+			local_flush_data_cache_page((void *)addr);
+			addr += PAGE_SIZE;
+		}
+	}
+}
+
+/*
+ * insw() and gang might be called with interrupts disabled, so we can't
+ * send IPIs for flushing due to the potencial of deadlocks, see the comment
+ * above smp_call_function() in arch/mips/kernel/smp.c.  We work around the
+ * problem by disabling preemption so we know we actually perform the flush
+ * on the processor that actually has the lines to be flushed which hopefully
+ * is even better for performance anyway.
+ */
+static inline void __ide_insw(unsigned long port, void *addr,
+	unsigned int count)
+{
+	__ide_flush_prologue();
+	insw(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
+{
+	__ide_flush_prologue();
+	insl(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_outsw(unsigned long port, const void *addr,
+	unsigned long count)
+{
+	__ide_flush_prologue();
+	outsw(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_outsl(unsigned long port, const void *addr,
+	unsigned long count)
+{
+	__ide_flush_prologue();
+	outsl(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
+{
+	__ide_flush_prologue();
+	readsw(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
+{
+	__ide_flush_prologue();
+	readsl(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
+{
+	__ide_flush_prologue();
+	writesw(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
+{
+	__ide_flush_prologue();
+	writesl(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
+}
+
+/* ide_insw calls insw, not __ide_insw.  Why? */
+#undef insw
+#undef insl
+#undef outsw
+#undef outsl
+#define insw(port, addr, count) __ide_insw(port, addr, count)
+#define insl(port, addr, count) __ide_insl(port, addr, count)
+#define outsw(port, addr, count) __ide_outsw(port, addr, count)
+#define outsl(port, addr, count) __ide_outsl(port, addr, count)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_MACH_GENERIC_IDE_H */
diff --git a/arch/mips/include/asm/mach-generic/ioremap.h b/arch/mips/include/asm/mach-generic/ioremap.h
new file mode 100644
index 0000000..b379938
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/ioremap.h
@@ -0,0 +1,34 @@
+/*
+ *	include/asm-mips/mach-generic/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_GENERIC_IOREMAP_H
+#define __ASM_MACH_GENERIC_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h
new file mode 100644
index 0000000..70d9a25
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/irq.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_IRQ_H
+#define __ASM_MACH_GENERIC_IRQ_H
+
+#ifndef NR_IRQS
+#define NR_IRQS	128
+#endif
+
+#ifdef CONFIG_I8259
+#ifndef I8259A_IRQ_BASE
+#define I8259A_IRQ_BASE	0
+#endif
+#endif
+
+#ifdef CONFIG_IRQ_CPU
+
+#ifndef MIPS_CPU_IRQ_BASE
+#ifdef CONFIG_I8259
+#define MIPS_CPU_IRQ_BASE 16
+#else
+#define MIPS_CPU_IRQ_BASE 0
+#endif /* CONFIG_I8259 */
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM7K
+#ifndef RM7K_CPU_IRQ_BASE
+#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8)
+#endif
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM9K
+#ifndef RM9K_CPU_IRQ_BASE
+#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12)
+#endif
+#endif
+
+#endif /* CONFIG_IRQ_CPU */
+
+#endif /* __ASM_MACH_GENERIC_IRQ_H */
diff --git a/arch/mips/include/asm/mach-generic/kernel-entry-init.h b/arch/mips/include/asm/mach-generic/kernel-entry-init.h
new file mode 100644
index 0000000..7e66505
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/kernel-entry-init.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+
+/* Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+.macro	kernel_entry_setup
+.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+	.macro	smp_slave_setup
+	.endm
+
+
+#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-generic/kmalloc.h b/arch/mips/include/asm/mach-generic/kmalloc.h
new file mode 100644
index 0000000..b8e6deb
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/kmalloc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_GENERIC_KMALLOC_H
+#define __ASM_MACH_GENERIC_KMALLOC_H
+
+
+#ifndef CONFIG_DMA_COHERENT
+/*
+ * Total overkill for most systems but need as a safe default.
+ * Set this one if any device in the system might do non-coherent DMA.
+ */
+#define ARCH_KMALLOC_MINALIGN	128
+#endif
+
+#endif /* __ASM_MACH_GENERIC_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-generic/mangle-port.h b/arch/mips/include/asm/mach-generic/mangle-port.h
new file mode 100644
index 0000000..f49dc99
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/mangle-port.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H
+#define __ASM_MACH_GENERIC_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	(port)
+#define __swizzle_addr_w(port)	(port)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+/*
+ * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
+ * less sane hardware forces software to fiddle with this...
+ *
+ * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
+ * you can't have the numerical value of data and byte addresses within
+ * multibyte quantities both preserved at the same time.  Hence two
+ * variations of functions: non-prefixed ones that preserve the value
+ * and prefixed ones that preserve byte addresses.  The latters are
+ * typically used for moving raw data between a peripheral and memory (cf.
+ * string I/O functions), hence the "__mem_" prefix.
+ */
+#if defined(CONFIG_SWAP_IO_SPACE)
+
+# define ioswabb(a, x)		(x)
+# define __mem_ioswabb(a, x)	(x)
+# define ioswabw(a, x)		le16_to_cpu(x)
+# define __mem_ioswabw(a, x)	(x)
+# define ioswabl(a, x)		le32_to_cpu(x)
+# define __mem_ioswabl(a, x)	(x)
+# define ioswabq(a, x)		le64_to_cpu(x)
+# define __mem_ioswabq(a, x)	(x)
+
+#else
+
+# define ioswabb(a, x)		(x)
+# define __mem_ioswabb(a, x)	(x)
+# define ioswabw(a, x)		(x)
+# define __mem_ioswabw(a, x)	cpu_to_le16(x)
+# define ioswabl(a, x)		(x)
+# define __mem_ioswabl(a, x)	cpu_to_le32(x)
+# define ioswabq(a, x)		(x)
+# define __mem_ioswabq(a, x)	cpu_to_le32(x)
+
+#endif
+
+#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-generic/mc146818rtc.h b/arch/mips/include/asm/mach-generic/mc146818rtc.h
new file mode 100644
index 0000000..0b9a942
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_GENERIC_MC146818RTC_H
+#define __ASM_MACH_GENERIC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD	1
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
+#endif
+
+#endif /* __ASM_MACH_GENERIC_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
new file mode 100644
index 0000000..c9fa4b1
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -0,0 +1,85 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_GENERIC_SPACES_H
+#define _ASM_MACH_GENERIC_SPACES_H
+
+#include <linux/const.h>
+
+/*
+ * This gives the physical RAM offset.
+ */
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET		_AC(0, UL)
+#endif
+
+#ifdef CONFIG_32BIT
+
+#define CAC_BASE		_AC(0x80000000, UL)
+#define IO_BASE			_AC(0xa0000000, UL)
+#define UNCAC_BASE		_AC(0xa0000000, UL)
+
+#ifndef MAP_BASE
+#define MAP_BASE		_AC(0xc0000000, UL)
+#endif
+
+/*
+ * Memory above this physical address will be considered highmem.
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START		_AC(0x20000000, UL)
+#endif
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#ifndef CAC_BASE
+#ifdef CONFIG_DMA_NONCOHERENT
+#define CAC_BASE		_AC(0x9800000000000000, UL)
+#else
+#define CAC_BASE		_AC(0xa800000000000000, UL)
+#endif
+#endif
+
+#ifndef IO_BASE
+#define IO_BASE			_AC(0x9000000000000000, UL)
+#endif
+
+#ifndef UNCAC_BASE
+#define UNCAC_BASE		_AC(0x9000000000000000, UL)
+#endif
+
+#ifndef MAP_BASE
+#define MAP_BASE		_AC(0xc000000000000000, UL)
+#endif
+
+/*
+ * Memory above this physical address will be considered highmem.
+ * Fixme: 59 bits is a fictive number and makes assumptions about processors
+ * in the distant future.  Nobody will care for a few years :-)
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START		(_AC(1, UL) << _AC(59, UL))
+#endif
+
+#define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
+#define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
+#define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * This handles the memory map.
+ */
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET		(CAC_BASE + PHYS_OFFSET)
+#endif
+
+#endif /* __ASM_MACH_GENERIC_SPACES_H */
diff --git a/arch/mips/include/asm/mach-generic/topology.h b/arch/mips/include/asm/mach-generic/topology.h
new file mode 100644
index 0000000..5428f33
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/topology.h
@@ -0,0 +1 @@
+#include <asm-generic/topology.h>
diff --git a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
new file mode 100644
index 0000000..9c87351
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 07 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP22 with a variety of processors so we can't use defaults for everything.
+ */
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+#define cpu_has_fpu		1
+#define cpu_has_32fpr		1
+#define cpu_has_counter		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_cache_cdex_p	1
+#define cpu_has_prefetch	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0		/* Needs to change for R8000 */
+#define cpu_has_dc_aliases	(PAGE_SIZE < 0x4000)
+#define cpu_has_ic_fills_f_dc	0
+
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip22/spaces.h b/arch/mips/include/asm/mach-ip22/spaces.h
new file mode 100644
index 0000000..7f9fa6f
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip22/spaces.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_IP22_SPACES_H
+#define _ASM_MACH_IP22_SPACES_H
+
+
+#ifdef CONFIG_64BIT
+
+#define PAGE_OFFSET		0xffffffff80000000UL
+
+#define CAC_BASE		0xffffffff80000000
+#define IO_BASE			0xffffffffa0000000
+#define UNCAC_BASE		0xffffffffa0000000
+#define MAP_BASE		0xc000000000000000
+
+#endif /* CONFIG_64BIT */
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_MACH_IP22_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip22/war.h b/arch/mips/include/asm/mach-ip22/war.h
new file mode 100644
index 0000000..a44fa96
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip22/war.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP22_WAR_H
+#define __ASM_MIPS_MACH_IP22_WAR_H
+
+/*
+ * R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors.
+ */
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	1
+#define R4600_V1_HIT_CACHEOP_WAR	1
+#define R4600_V2_HIT_CACHEOP_WAR	1
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_IP22_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
new file mode 100644
index 0000000..7d3112b
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
@@ -0,0 +1,54 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 07 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP27 only comes with R10000 family processors all using the same config
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_icache_snoops_remote_store	1
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_6k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_8k_cache	0
+#define cpu_has_tx39_cache	0
+
+#define cpu_has_inclusive_pcaches	1
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	64
+#define cpu_scache_line_size()	128
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h
new file mode 100644
index 0000000..ed7e622
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H
+#define __ASM_MACH_IP27_DMA_COHERENCE_H
+
+#include <asm/pci/bridge.h>
+
+#define pdev_to_baddr(pdev, addr) \
+	(BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr))
+#define dev_to_baddr(dev, addr) \
+	pdev_to_baddr(to_pci_dev(dev), (addr))
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+	size_t size)
+{
+	dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr));
+
+	return pa;
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+	dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page));
+
+	return pa;
+}
+
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return dma_addr & ~(0xffUL << 56);
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 1;		/* IP27 non-cohernet mode is unsupported */
+}
+
+#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-ip27/irq.h b/arch/mips/include/asm/mach-ip27/irq.h
new file mode 100644
index 0000000..cf4384b
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/irq.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 01, 02, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 Kanoj Sarcar
+ */
+#ifndef __ASM_MACH_IP27_IRQ_H
+#define __ASM_MACH_IP27_IRQ_H
+
+/*
+ * A hardwired interrupt number is completly stupid for this system - a
+ * large configuration might have thousands if not tenthousands of
+ * interrupts.
+ */
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_IP27_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
new file mode 100644
index 0000000..624d66c
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2005 Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_IP27_KERNEL_ENTRY_H
+#define __ASM_MACH_IP27_KERNEL_ENTRY_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/sn0/hubni.h>
+#include <asm/sn/klkernvars.h>
+
+/*
+ * Returns the local nasid into res.
+ */
+	.macro GET_NASID_ASM res
+	dli	\res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
+	ld	\res, (\res)
+	and	\res, NSRI_NODEID_MASK
+	dsrl	\res, NSRI_NODEID_SHFT
+	.endm
+
+/*
+ * Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+	.macro	kernel_entry_setup
+	GET_NASID_ASM	t1
+	move		t2, t1			# text and data are here
+	MAPPED_KERNEL_SETUP_TLB
+	.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+	.macro	smp_slave_setup
+	GET_NASID_ASM	t1
+	dli	t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
+		    KLDIR_OFF_POINTER + CAC_BASE
+	dsll	t1, NASID_SHFT
+	or	t0, t0, t1
+	ld	t0, 0(t0)			# t0 points to kern_vars struct
+	lh	t1, KV_RO_NASID_OFFSET(t0)
+	lh	t2, KV_RW_NASID_OFFSET(t0)
+	MAPPED_KERNEL_SETUP_TLB
+
+	/*
+	 * We might not get launched at the address the kernel is linked to,
+	 * so we jump there.
+	 */
+	PTR_LA  t0, 0f
+	jr      t0
+0:
+	.endm
+
+#endif /* __ASM_MACH_IP27_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-ip27/kmalloc.h b/arch/mips/include/asm/mach-ip27/kmalloc.h
new file mode 100644
index 0000000..426bd04
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/kmalloc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_IP27_KMALLOC_H
+#define __ASM_MACH_IP27_KMALLOC_H
+
+/*
+ * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ */
+
+#endif /* __ASM_MACH_IP27_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-ip27/mangle-port.h b/arch/mips/include/asm/mach-ip27/mangle-port.h
new file mode 100644
index 0000000..f6e4912
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/mangle-port.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP27_MANGLE_PORT_H
+#define __ASM_MACH_IP27_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	(port)
+#define __swizzle_addr_w(port)	((port) ^ 2)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+# define ioswabb(a, x)		(x)
+# define __mem_ioswabb(a, x)	(x)
+# define ioswabw(a, x)		(x)
+# define __mem_ioswabw(a, x)	cpu_to_le16(x)
+# define ioswabl(a, x)		(x)
+# define __mem_ioswabl(a, x)	cpu_to_le32(x)
+# define ioswabq(a, x)		(x)
+# define __mem_ioswabq(a, x)	cpu_to_le32(x)
+
+#endif /* __ASM_MACH_IP27_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h
new file mode 100644
index 0000000..986a3b9
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/mmzone.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_MACH_MMZONE_H
+#define _ASM_MACH_MMZONE_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/hub.h>
+
+#define pa_to_nid(addr)		NASID_TO_COMPACT_NODEID(NASID_GET(addr))
+
+#define LEVELS_PER_SLICE        128
+
+struct slice_data {
+	unsigned long irq_enable_mask[2];
+	int level_to_irq[LEVELS_PER_SLICE];
+};
+
+struct hub_data {
+	kern_vars_t	kern_vars;
+	DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW);
+	cpumask_t	h_cpus;
+	unsigned long slice_map;
+	unsigned long irq_alloc_mask[2];
+	struct slice_data slice[2];
+};
+
+struct node_data {
+	struct pglist_data pglist;
+	struct hub_data hub;
+};
+
+extern struct node_data *__node_data[];
+
+#define NODE_DATA(n)		(&__node_data[(n)]->pglist)
+#define hub_data(n)		(&__node_data[(n)]->hub)
+
+#endif /* _ASM_MACH_MMZONE_H */
diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h
new file mode 100644
index 0000000..b18802a
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/spaces.h
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999 by Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_IP27_SPACES_H
+#define _ASM_MACH_IP27_SPACES_H
+
+/*
+ * IP27 uses the R10000's uncached attribute feature.  Attribute 3 selects
+ * uncached memory addressing.
+ */
+
+#define HSPEC_BASE		0x9000000000000000
+#define IO_BASE			0x9200000000000000
+#define MSPEC_BASE		0x9400000000000000
+#define UNCAC_BASE		0x9600000000000000
+
+#define TO_MSPEC(x)		(MSPEC_BASE | ((x) & TO_PHYS_MASK))
+#define TO_HSPEC(x)		(HSPEC_BASE | ((x) & TO_PHYS_MASK))
+
+#define HIGHMEM_START		(~0UL)
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MACH_IP27_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
new file mode 100644
index 0000000..7785bec
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_MACH_TOPOLOGY_H
+#define _ASM_MACH_TOPOLOGY_H	1
+
+#include <asm/sn/hub.h>
+#include <asm/sn/types.h>
+#include <asm/mmzone.h>
+
+struct cpuinfo_ip27 {
+//	cpuid_t		p_cpuid;	/* PROM assigned cpuid */
+	cnodeid_t	p_nodeid;	/* my node ID in compact-id-space */
+	nasid_t		p_nasid;	/* my node ID in numa-as-id-space */
+	unsigned char	p_slice;	/* Physical position on node board */
+#if 0
+	unsigned long		loops_per_sec;
+	unsigned long		ipi_count;
+	unsigned long		irq_attempt[NR_IRQS];
+	unsigned long		smp_local_irq_count;
+	unsigned long		prof_multiplier;
+	unsigned long		prof_counter;
+#endif
+};
+
+extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
+
+#define cpu_to_node(cpu)	(sn_cpu_info[(cpu)].p_nodeid)
+#define parent_node(node)	(node)
+#define node_to_cpumask(node)	(hub_data(node)->h_cpus)
+#define node_to_first_cpu(node)	(first_cpu(node_to_cpumask(node)))
+struct pci_bus;
+extern int pcibus_to_node(struct pci_bus *);
+
+#define pcibus_to_cpumask(bus)	(cpu_online_map)
+
+extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
+
+#define node_distance(from, to)	(__node_distances[(from)][(to)])
+
+/* sched_domains SD_NODE_INIT for SGI IP27 machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_MACH_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/mach-ip27/war.h b/arch/mips/include/asm/mach-ip27/war.h
new file mode 100644
index 0000000..e2ddcc9
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP27_WAR_H
+#define __ASM_MIPS_MACH_IP27_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			1
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_IP27_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
new file mode 100644
index 0000000..9a53b32
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ * 6/2004	pf
+ */
+#ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP28 only comes with R10000 family processors all using the same config
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0 /* see probe_pcache() */
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_icache_snoops_remote_store  1
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+
+#define cpu_has_inclusive_pcaches	1
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	64
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip28/spaces.h b/arch/mips/include/asm/mach-ip28/spaces.h
new file mode 100644
index 0000000..05aabb2
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip28/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ * 2004	pf
+ */
+#ifndef _ASM_MACH_IP28_SPACES_H
+#define _ASM_MACH_IP28_SPACES_H
+
+#define CAC_BASE		0xa800000000000000
+
+#define HIGHMEM_START		(~0UL)
+
+#define PHYS_OFFSET		_AC(0x20000000, UL)
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MACH_IP28_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip28/war.h b/arch/mips/include/asm/mach-ip28/war.h
new file mode 100644
index 0000000..a1baafa
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip28/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP28_WAR_H
+#define __ASM_MIPS_MACH_IP28_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			1
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_IP28_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h
new file mode 100644
index 0000000..6782fcc
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Ilya A. Volynets-Evenbakh
+ * Copyright (C) 2005, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H
+
+
+/*
+ * R5000 has an interesting "restriction":  ll(d)/sc(d)
+ * instructions to XKPHYS region simply do uncached bus
+ * requests. This breaks all the atomic bitops functions.
+ * so, for 64bit IP32 kernel we just don't use ll/sc.
+ * This does not affect luserland.
+ */
+#if (defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_NEVADA)) && defined(CONFIG_64BIT)
+#define cpu_has_llsc		0
+#else
+#define cpu_has_llsc		1
+#endif
+
+/* Settings which are common for all ip32 CPUs */
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_fpu		1
+#define cpu_has_32fpr		1
+#define cpu_has_counter		1
+#define cpu_has_mips16		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_has_4k_cache	1
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h
new file mode 100644
index 0000000..a5511eb
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H
+#define __ASM_MACH_IP32_DMA_COHERENCE_H
+
+#include <asm/ip32/crime.h>
+
+struct device;
+
+/*
+ * Few notes.
+ * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M
+ * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for
+ *    native-endian)
+ * 3. All other devices see memory as one big chunk at 0x40000000
+ * 4. Non-PCI devices will pass NULL as struct device*
+ *
+ * Thus we translate differently, depending on device.
+ */
+
+#define RAM_OFFSET_MASK 0x3fffffffUL
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+	size_t size)
+{
+	dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK;
+
+	if (dev == NULL)
+		pa += CRIME_HI_MEM_BASE;
+
+	return pa;
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+	dma_addr_t pa;
+
+	pa = page_to_phys(page) & RAM_OFFSET_MASK;
+
+	if (dev == NULL)
+		pa += CRIME_HI_MEM_BASE;
+
+	return pa;
+}
+
+/* This is almost certainly wrong but it's what dma-ip32.c used to use  */
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	unsigned long addr = dma_addr & RAM_OFFSET_MASK;
+
+	if (dma_addr >= 256*1024*1024)
+		addr += CRIME_HI_MEM_BASE;
+
+	return addr;
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;		/* IP32 is non-cohernet */
+}
+
+#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-ip32/kmalloc.h b/arch/mips/include/asm/mach-ip32/kmalloc.h
new file mode 100644
index 0000000..b1e0be6
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/kmalloc.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_MACH_IP32_KMALLOC_H
+#define __ASM_MACH_IP32_KMALLOC_H
+
+
+#if defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_RM7000)
+#define ARCH_KMALLOC_MINALIGN	32
+#else
+#define ARCH_KMALLOC_MINALIGN	128
+#endif
+
+#endif /* __ASM_MACH_IP32_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-ip32/mangle-port.h b/arch/mips/include/asm/mach-ip32/mangle-port.h
new file mode 100644
index 0000000..f1d0f17
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/mangle-port.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ladislav Michl
+ * Copyright (C) 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP32_MANGLE_PORT_H
+#define __ASM_MACH_IP32_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	((port) ^ 3)
+#define __swizzle_addr_w(port)	((port) ^ 2)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+# define ioswabb(a, x)		(x)
+# define __mem_ioswabb(a, x)	(x)
+# define ioswabw(a, x)		(x)
+# define __mem_ioswabw(a, x)	cpu_to_le16(x)
+# define ioswabl(a, x)		(x)
+# define __mem_ioswabl(a, x)	cpu_to_le32(x)
+# define ioswabq(a, x)		(x)
+# define __mem_ioswabq(a, x)	cpu_to_le32(x)
+
+#endif /* __ASM_MACH_IP32_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-ip32/mc146818rtc.h b/arch/mips/include/asm/mach-ip32/mc146818rtc.h
new file mode 100644
index 0000000..c28ba8d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ * Copyright (C) 2000 Harald Koerfgen
+ *
+ * RTC routines for IP32 style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_IP32_MC146818RTC_H
+#define __ASM_MACH_IP32_MC146818RTC_H
+
+#include <asm/ip32/mace.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+
+static unsigned char CMOS_READ(unsigned long addr)
+{
+	return mace->isa.rtc[addr << 8];
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	mace->isa.rtc[addr << 8] = data;
+}
+
+/*
+ * FIXME: Do it right. For now just assume that noone lives in 20th century
+ * and no O2 user in 22th century ;-)
+ */
+#define mc146818_decode_year(year) ((year) + 2000)
+
+#define RTC_ALWAYS_BCD	0
+
+#endif /* __ASM_MACH_IP32_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-ip32/war.h b/arch/mips/include/asm/mach-ip32/war.h
new file mode 100644
index 0000000..d194056
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP32_WAR_H
+#define __ASM_MIPS_MACH_IP32_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR   1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_IP32_WAR_H */
diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h
new file mode 100644
index 0000000..d66979a
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H
+#define __ASM_MACH_JAZZ_DMA_COHERENCE_H
+
+#include <asm/jazzdma.h>
+
+struct device;
+
+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
+{
+	return vdma_alloc(virt_to_phys(addr), size);
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+	return vdma_alloc(page_to_phys(page), PAGE_SIZE);
+}
+
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return vdma_log2phys(dma_addr);
+}
+
+static void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+	vdma_free(dma_addr);
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-jazz/floppy.h b/arch/mips/include/asm/mach-jazz/floppy.h
new file mode 100644
index 0000000..56e9ca6
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/floppy.h
@@ -0,0 +1,135 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_JAZZ_FLOPPY_H
+#define __ASM_MACH_JAZZ_FLOPPY_H
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <asm/addrspace.h>
+#include <asm/jazz.h>
+#include <asm/jazzdma.h>
+#include <asm/pgtable.h>
+
+static inline unsigned char fd_inb(unsigned int port)
+{
+	unsigned char c;
+
+	c = *(volatile unsigned char *) port;
+	udelay(1);
+
+	return c;
+}
+
+static inline void fd_outb(unsigned char value, unsigned int port)
+{
+	*(volatile unsigned char *) port = value;
+}
+
+/*
+ * How to access the floppy DMA functions.
+ */
+static inline void fd_enable_dma(void)
+{
+	vdma_enable(JAZZ_FLOPPY_DMA);
+}
+
+static inline void fd_disable_dma(void)
+{
+	vdma_disable(JAZZ_FLOPPY_DMA);
+}
+
+static inline int fd_request_dma(void)
+{
+	return 0;
+}
+
+static inline void fd_free_dma(void)
+{
+}
+
+static inline void fd_clear_dma_ff(void)
+{
+}
+
+static inline void fd_set_dma_mode(char mode)
+{
+	vdma_set_mode(JAZZ_FLOPPY_DMA, mode);
+}
+
+static inline void fd_set_dma_addr(char *a)
+{
+	vdma_set_addr(JAZZ_FLOPPY_DMA, vdma_phys2log(CPHYSADDR((unsigned long)a)));
+}
+
+static inline void fd_set_dma_count(unsigned int count)
+{
+	vdma_set_count(JAZZ_FLOPPY_DMA, count);
+}
+
+static inline int fd_get_dma_residue(void)
+{
+	return vdma_get_residue(JAZZ_FLOPPY_DMA);
+}
+
+static inline void fd_enable_irq(void)
+{
+}
+
+static inline void fd_disable_irq(void)
+{
+}
+
+static inline int fd_request_irq(void)
+{
+	return request_irq(FLOPPY_IRQ, floppy_interrupt,
+	                   IRQF_DISABLED, "floppy", NULL);
+}
+
+static inline void fd_free_irq(void)
+{
+	free_irq(FLOPPY_IRQ, NULL);
+}
+
+static inline unsigned long fd_getfdaddr1(void)
+{
+	return JAZZ_FDC_BASE;
+}
+
+static inline unsigned long fd_dma_mem_alloc(unsigned long size)
+{
+	unsigned long mem;
+
+	mem = __get_dma_pages(GFP_KERNEL, get_order(size));
+	if(!mem)
+		return 0;
+	vdma_alloc(CPHYSADDR(mem), size);	/* XXX error checking */
+
+	return mem;
+}
+
+static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	vdma_free(vdma_phys2log(CPHYSADDR(addr)));
+	free_pages(addr, get_order(size));
+}
+
+static inline unsigned long fd_drive_type(unsigned long n)
+{
+	/* XXX This is wrong for machines with ED 2.88mb disk drives like the
+	   Olivetti M700.  Anyway, we should suck this from the ARC
+	   firmware.  */
+	if (n == 0)
+		return 4;	/* 3,5", 1.44mb */
+
+	return 0;
+}
+
+#endif /* __ASM_MACH_JAZZ_FLOPPY_H */
diff --git a/arch/mips/include/asm/mach-jazz/mc146818rtc.h b/arch/mips/include/asm/mach-jazz/mc146818rtc.h
new file mode 100644
index 0000000..987f727
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/mc146818rtc.h
@@ -0,0 +1,38 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ * Copyright (C) 2007 Thomas Bogendoerfer
+ *
+ * RTC routines for Jazz style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_JAZZ_MC146818RTC_H
+#define __ASM_MACH_JAZZ_MC146818RTC_H
+
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/jazz.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return *(volatile char *)JAZZ_RTC_BASE;
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	*(volatile char *)JAZZ_RTC_BASE = data;
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#define mc146818_decode_year(year) ((year) + 1980)
+
+#endif /* __ASM_MACH_JAZZ_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-jazz/war.h b/arch/mips/include/asm/mach-jazz/war.h
new file mode 100644
index 0000000..6158ee8
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_JAZZ_WAR_H
+#define __ASM_MIPS_MACH_JAZZ_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_JAZZ_WAR_H */
diff --git a/arch/mips/include/asm/mach-lasat/irq.h b/arch/mips/include/asm/mach-lasat/irq.h
new file mode 100644
index 0000000..3a28241
--- /dev/null
+++ b/arch/mips/include/asm/mach-lasat/irq.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_MACH_LASAT_IRQ_H
+#define _ASM_MACH_LASAT_IRQ_H
+
+#define LASAT_CASCADE_IRQ	(MIPS_CPU_IRQ_BASE + 2)
+
+#define LASAT_IRQ_BASE		8
+#define LASAT_IRQ_END		23
+
+#define NR_IRQS			24
+
+#include_next <irq.h>
+
+#endif /* _ASM_MACH_LASAT_IRQ_H */
diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
new file mode 100644
index 0000000..1a9ad45
--- /dev/null
+++ b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
@@ -0,0 +1,27 @@
+/*
+ *  This is a direct copy of the ev96100.h file, with a global
+ * search and replace.  The numbers are the same.
+ *
+ *  The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H
+#define _ASM_GT64120_LASAT_GT64120_DEP_H
+
+/*
+ *   GT64120 config space base address on Lasat 100
+ */
+#define GT64120_BASE	(KSEG1ADDR(0x14000000))
+
+/*
+ *   PCI Bus allocation
+ *
+ *   (Guessing ...)
+ */
+#define GT_PCI_MEM_BASE	0x12000000UL
+#define GT_PCI_MEM_SIZE	0x02000000UL
+#define GT_PCI_IO_BASE	0x10000000UL
+#define GT_PCI_IO_SIZE	0x02000000UL
+#define GT_ISA_IO_BASE	PCI_IO_BASE
+
+#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */
diff --git a/arch/mips/include/asm/mach-lasat/war.h b/arch/mips/include/asm/mach-lasat/war.h
new file mode 100644
index 0000000..bb1e032
--- /dev/null
+++ b/arch/mips/include/asm/mach-lasat/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_LASAT_WAR_H
+#define __ASM_MIPS_MACH_LASAT_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_LASAT_WAR_H */
diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-lemote/dma-coherence.h
new file mode 100644
index 0000000..7e91477
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/dma-coherence.h
@@ -0,0 +1,42 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ */
+#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H
+#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+					  size_t size)
+{
+	return virt_to_phys(addr) | 0x80000000;
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+					       struct page *page)
+{
+	return page_to_phys(page) | 0x80000000;
+}
+
+static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return dma_addr & 0x7fffffff;
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-lemote/mc146818rtc.h b/arch/mips/include/asm/mach-lemote/mc146818rtc.h
new file mode 100644
index 0000000..ed5147e
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H
+#define __ASM_MACH_LEMOTE_MC146818RTC_H
+
+#include <linux/io.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+#endif
+
+#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-lemote/war.h b/arch/mips/include/asm/mach-lemote/war.h
new file mode 100644
index 0000000..05f89e0
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_LEMOTE_WAR_H
+#define __ASM_MIPS_MACH_LEMOTE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_LEMOTE_WAR_H */
diff --git a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
new file mode 100644
index 0000000..7f3e3f9
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Chris Dearman
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
+
+
+/*
+ * CPU feature overrides for MIPS boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+/* #define cpu_has_fpu		? */
+/* #define cpu_has_32fpr	? */
+#define cpu_has_counter		1
+/* #define cpu_has_watch	? */
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+/* #define cpu_has_cache_cdex_p	? */
+/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_prefetch	? */
+#define cpu_has_mcheck		1
+/* #define cpu_has_ejtag	? */
+#ifdef CONFIG_CPU_HAS_LLSC
+#define cpu_has_llsc		1
+#else
+#define cpu_has_llsc		0
+#endif
+/* #define cpu_has_vtag_icache	? */
+/* #define cpu_has_dc_aliases	? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex		0
+/* #define cpu_has_64bits	? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+/* #define cpu_has_fpu		? */
+/* #define cpu_has_32fpr	? */
+#define cpu_has_counter		1
+/* #define cpu_has_watch	? */
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+/* #define cpu_has_cache_cdex_p	? */
+/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_prefetch	? */
+#define cpu_has_mcheck		1
+/* #define cpu_has_ejtag	? */
+#define cpu_has_llsc		1
+/* #define cpu_has_vtag_icache	? */
+/* #define cpu_has_dc_aliases	? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex		0
+/* #define cpu_has_64bits	? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
+#endif
+
+#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-malta/irq.h b/arch/mips/include/asm/mach-malta/irq.h
new file mode 100644
index 0000000..9b9da26
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_MIPS_IRQ_H
+#define __ASM_MACH_MIPS_IRQ_H
+
+
+#define NR_IRQS	256
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_MIPS_IRQ_H */
diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
new file mode 100644
index 0000000..0b793e7
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Chris Dearman (chris@mips.com)
+ * Copyright (C) 2007 Mips Technologies, Inc.
+ */
+#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+
+	.macro	kernel_entry_setup
+#ifdef CONFIG_MIPS_MT_SMTC
+	mfc0	t0, CP0_CONFIG
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 1
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 2
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 3
+	and	t0, 1<<2
+	bnez	t0, 0f
+9:
+	/* Assume we came from YAMON... */
+	PTR_LA	v0, 0x9fc00534	/* YAMON print */
+	lw	v0, (v0)
+	move	a0, zero
+	PTR_LA	a1, nonmt_processor
+	jal	v0
+
+	PTR_LA	v0, 0x9fc00520	/* YAMON exit */
+	lw	v0, (v0)
+	li	a0, 1
+	jal	v0
+
+1:	b	1b
+
+	__INITDATA
+nonmt_processor:
+	.asciz	"SMTC kernel requires the MT ASE to run\n"
+	__FINIT
+0:
+#endif
+	.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can safely execute C code.
+ */
+	.macro	smp_slave_setup
+	.endm
+
+#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-malta/mach-gt64120.h b/arch/mips/include/asm/mach-malta/mach-gt64120.h
new file mode 100644
index 0000000..0f86314
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/mach-gt64120.h
@@ -0,0 +1,19 @@
+/*
+ *  This is a direct copy of the ev96100.h file, with a global
+ * search and replace.  The numbers are the same.
+ *
+ *  The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef _ASM_MACH_MIPS_MACH_GT64120_DEP_H
+#define _ASM_MACH_MIPS_MACH_GT64120_DEP_H
+
+#define MIPS_GT_BASE	0x1be00000
+
+extern unsigned long _pcictrl_gt64120;
+/*
+ *   GT64120 config space base address
+ */
+#define GT64120_BASE	_pcictrl_gt64120
+
+#endif /* _ASM_MACH_MIPS_MACH_GT64120_DEP_H */
diff --git a/arch/mips/include/asm/mach-malta/mc146818rtc.h b/arch/mips/include/asm/mach-malta/mc146818rtc.h
new file mode 100644
index 0000000..ea612f3
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/mc146818rtc.h
@@ -0,0 +1,48 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2003 by Ralf Baechle
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * RTC routines for Malta style attached PIIX4 device, which contains a
+ * Motorola MC146818A-compatible Real Time Clock.
+ */
+#ifndef __ASM_MACH_MALTA_MC146818RTC_H
+#define __ASM_MACH_MALTA_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/malta.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb(addr, MALTA_RTC_ADR_REG);
+	return inb(MALTA_RTC_DAT_REG);
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb(addr, MALTA_RTC_ADR_REG);
+	outb(data, MALTA_RTC_DAT_REG);
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
+
+#endif /* __ASM_MACH_MALTA_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-malta/war.h b/arch/mips/include/asm/mach-malta/war.h
new file mode 100644
index 0000000..7c6931d
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
+#define __ASM_MIPS_MACH_MIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	1
+#define MIPS_CACHE_SYNC_WAR		1
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h b/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h
new file mode 100644
index 0000000..779b022
--- /dev/null
+++ b/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h
@@ -0,0 +1,65 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Chris Dearman
+ */
+#ifndef __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
+
+
+/*
+ * CPU feature overrides for MIPS boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+#define cpu_has_fpu		0
+/* #define cpu_has_32fpr	? */
+#define cpu_has_counter		1
+/* #define cpu_has_watch	? */
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+/* #define cpu_has_cache_cdex_p	? */
+/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_prefetch	? */
+#define cpu_has_mcheck		1
+/* #define cpu_has_ejtag	? */
+#define cpu_has_llsc		1
+/* #define cpu_has_vtag_icache	? */
+/* #define cpu_has_dc_aliases	? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex		0
+/* #define cpu_has_64bits	? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+/* #define cpu_has_fpu		? */
+/* #define cpu_has_32fpr	? */
+#define cpu_has_counter		1
+/* #define cpu_has_watch	? */
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+/* #define cpu_has_cache_cdex_p	? */
+/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_prefetch	? */
+#define cpu_has_mcheck		1
+/* #define cpu_has_ejtag	? */
+#define cpu_has_llsc		1
+/* #define cpu_has_vtag_icache	? */
+/* #define cpu_has_dc_aliases	? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex		0
+/* #define cpu_has_64bits	? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#endif
+
+#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-mipssim/war.h b/arch/mips/include/asm/mach-mipssim/war.h
new file mode 100644
index 0000000..c8a74a3
--- /dev/null
+++ b/arch/mips/include/asm/mach-mipssim/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPSSIM_WAR_H
+#define __ASM_MIPS_MACH_MIPSSIM_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_MIPSSIM_WAR_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h
new file mode 100644
index 0000000..622c587
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h
@@ -0,0 +1,34 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_AU1XX_MC146818RTC_H
+#define __ASM_MACH_AU1XX_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define RTC_PORT(x)	(0x0c000000 + (x))
+#define RTC_IRQ		8
+#define PB1500_RTC_ADDR 0x0c000000
+
+static inline unsigned char CMOS_READ(unsigned long offset)
+{
+	offset <<= 2;
+	return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff);
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long offset)
+{
+	offset <<= 2;
+	au_writel(data, offset + PB1500_RTC_ADDR);
+}
+
+#define RTC_ALWAYS_BCD	1
+
+#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h
new file mode 100644
index 0000000..6d1ff90
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1000.h
@@ -0,0 +1,87 @@
+/*
+ * Alchemy Semi Pb1000 Referrence Board
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1000_H
+#define __ASM_PB1000_H
+
+/* PCMCIA PB1000 specific defines */
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+#define PB1000_PCR		0xBE000000
+#  define PCR_SLOT_0_VPP0	(1 << 0)
+#  define PCR_SLOT_0_VPP1	(1 << 1)
+#  define PCR_SLOT_0_VCC0	(1 << 2)
+#  define PCR_SLOT_0_VCC1	(1 << 3)
+#  define PCR_SLOT_0_RST	(1 << 4)
+#  define PCR_SLOT_1_VPP0	(1 << 8)
+#  define PCR_SLOT_1_VPP1	(1 << 9)
+#  define PCR_SLOT_1_VCC0	(1 << 10)
+#  define PCR_SLOT_1_VCC1	(1 << 11)
+#  define PCR_SLOT_1_RST	(1 << 12)
+
+#define PB1000_MDR		0xBE000004
+#  define MDR_PI		(1 << 5)	/* PCMCIA int latch  */
+#  define MDR_EPI		(1 << 14)	/* enable PCMCIA int */
+#  define MDR_CPI		(1 << 15)	/* clear  PCMCIA int  */
+
+#define PB1000_ACR1		0xBE000008
+#  define ACR1_SLOT_0_CD1	(1 << 0)	/* card detect 1	*/
+#  define ACR1_SLOT_0_CD2	(1 << 1)	/* card detect 2	*/
+#  define ACR1_SLOT_0_READY	(1 << 2)	/* ready		*/
+#  define ACR1_SLOT_0_STATUS	(1 << 3)	/* status change	*/
+#  define ACR1_SLOT_0_VS1	(1 << 4)	/* voltage sense 1	*/
+#  define ACR1_SLOT_0_VS2	(1 << 5)	/* voltage sense 2	*/
+#  define ACR1_SLOT_0_INPACK	(1 << 6)	/* inpack pin status	*/
+#  define ACR1_SLOT_1_CD1	(1 << 8)	/* card detect 1	*/
+#  define ACR1_SLOT_1_CD2	(1 << 9)	/* card detect 2	*/
+#  define ACR1_SLOT_1_READY	(1 << 10)	/* ready		*/
+#  define ACR1_SLOT_1_STATUS	(1 << 11)	/* status change	*/
+#  define ACR1_SLOT_1_VS1	(1 << 12)	/* voltage sense 1	*/
+#  define ACR1_SLOT_1_VS2	(1 << 13)	/* voltage sense 2	*/
+#  define ACR1_SLOT_1_INPACK	(1 << 14)	/* inpack pin status	*/
+
+#define CPLD_AUX0		0xBE00000C
+#define CPLD_AUX1		0xBE000010
+#define CPLD_AUX2		0xBE000014
+
+/* Voltage levels */
+
+/* VPPEN1 - VPPEN0 */
+#define VPP_GND ((0 << 1) | (0 << 0))
+#define VPP_5V	((1 << 1) | (0 << 0))
+#define VPP_3V	((0 << 1) | (1 << 0))
+#define VPP_12V ((0 << 1) | (1 << 0))
+#define VPP_HIZ ((1 << 1) | (1 << 0))
+
+/* VCCEN1 - VCCEN0 */
+#define VCC_3V	((0 << 1) | (1 << 0))
+#define VCC_5V	((1 << 1) | (0 << 0))
+#define VCC_HIZ ((0 << 1) | (0 << 0))
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+#endif /* __ASM_PB1000_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1100.h b/arch/mips/include/asm/mach-pb1x00/pb1100.h
new file mode 100644
index 0000000..b1a60f1
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1100.h
@@ -0,0 +1,85 @@
+/*
+ * Alchemy Semi Pb1100 Referrence Board
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1100_H
+#define __ASM_PB1100_H
+
+#define PB1100_IDENT		0xAE000000
+#define BOARD_STATUS_REG	0xAE000004
+#  define PB1100_ROM_SEL	(1 << 15)
+#  define PB1100_ROM_SIZ	(1 << 14)
+#  define PB1100_SWAP_BOOT	(1 << 13)
+#  define PB1100_FLASH_WP	(1 << 12)
+#  define PB1100_ROM_H_STS	(1 << 11)
+#  define PB1100_ROM_L_STS	(1 << 10)
+#  define PB1100_FLASH_H_STS	(1 << 9)
+#  define PB1100_FLASH_L_STS	(1 << 8)
+#  define PB1100_SRAM_SIZ	(1 << 7)
+#  define PB1100_TSC_BUSY	(1 << 6)
+#  define PB1100_PCMCIA_VS_MASK (3 << 4)
+#  define PB1100_RS232_CD	(1 << 3)
+#  define PB1100_RS232_CTS	(1 << 2)
+#  define PB1100_RS232_DSR	(1 << 1)
+#  define PB1100_RS232_RI	(1 << 0)
+
+#define PB1100_IRDA_RS232	0xAE00000C
+#  define PB1100_IRDA_FULL	(0 << 14)	/* full power		*/
+#  define PB1100_IRDA_SHUTDOWN	(1 << 14)
+#  define PB1100_IRDA_TT	(2 << 14)	/* 2/3 power		*/
+#  define PB1100_IRDA_OT	(3 << 14)	/* 1/3 power		*/
+#  define PB1100_IRDA_FIR	(1 << 13)
+
+#define PCMCIA_BOARD_REG	0xAE000010
+#  define PB1100_SD_WP1_RO	(1 << 15)	/* read only		*/
+#  define PB1100_SD_WP0_RO	(1 << 14)	/* read only		*/
+#  define PB1100_SD_PWR1	(1 << 11)	/* applies power to SD1 */
+#  define PB1100_SD_PWR0	(1 << 10)	/* applies power to SD0 */
+#  define PB1100_SEL_SD_CONN1	(1 << 9)
+#  define PB1100_SEL_SD_CONN0	(1 << 8)
+#  define PC_DEASSERT_RST	(1 << 7)
+#  define PC_DRV_EN		(1 << 4)
+
+#define PB1100_G_CONTROL	0xAE000014	/* graphics control	*/
+
+#define PB1100_RST_VDDI 	0xAE00001C
+#  define PB1100_SOFT_RESET	(1 << 15)	/* clear to reset the board */
+#  define PB1100_VDDI_MASK	0x1F
+
+#define PB1100_LEDS		0xAE000018
+
+/*
+ * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
+ * 7:0  is the LED Display's decimal points.
+ */
+#define PB1100_HEX_LED		0xAE000018
+
+/* PCMCIA Pb1100 specific defines */
+#define PCMCIA_MAX_SOCK  0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
+
+#endif /* __ASM_PB1100_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
new file mode 100644
index 0000000..c8618df
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -0,0 +1,259 @@
+/*
+ * AMD Alchemy Pb1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1200_H
+#define __ASM_PB1200_H
+
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC1_RX
+
+/*
+ * SPI and SMB are muxed on the Pb1200 board.
+ * Refer to board documentation.
+ */
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC0_BASE_ADDR
+/*
+ * AC97 and I2S are muxed on the Pb1200 board.
+ * Refer to board documentation.
+ */
+#define AC97_PSC_BASE       PSC1_BASE_ADDR
+#define I2S_PSC_BASE		PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xAD800000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 board;
+		u16 reserved5;
+	/*18*/	u16 disk_leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+	/*20*/	u16 intclr;
+		u16 reserved8;
+	/*24*/	u16 intset;
+		u16 reserved9;
+	/*28*/	u16 intclr_mask;
+		u16 reserved10;
+	/*2C*/	u16 intset_mask;
+		u16 reserved11;
+
+	/*30*/	u16 sig_status;
+		u16 reserved12;
+	/*34*/	u16 int_status;
+		u16 reserved13;
+	/*38*/	u16 reserved14;
+		u16 reserved15;
+	/*3C*/	u16 reserved16;
+		u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_IDECBLID	0x0200
+#define BCSR_STATUS_SD0WP	0x0400
+#define BCSR_STATUS_SD1WP	0x0800
+#define BCSR_STATUS_U0RXD	0x1000
+#define BCSR_STATUS_U1RXD	0x2000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_ETH		0x0001
+#define BCSR_RESETS_CAMERA	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_IDE		0x0008
+/* not resets but in the same register */
+#define BCSR_RESETS_WSCFSM	0x0800
+#define BCSR_RESETS_PCS0MUX	0x1000
+#define BCSR_RESETS_PCS1MUX	0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+#define BCSR_RESETS_SD1MUX	0x8000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_BOARD_LCDVEE	0x0001
+#define BCSR_BOARD_LCDVDD	0x0002
+#define BCSR_BOARD_LCDBL	0x0004
+#define BCSR_BOARD_CAMSNAP	0x0010
+#define BCSR_BOARD_CAMPWR	0x0020
+#define BCSR_BOARD_SD0PWR	0x0040
+#define BCSR_BOARD_SD1PWR	0x0080
+
+#define BCSR_LEDS_DECIMALS	0x00FF
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_VDDI	0x001F
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE		0x0001
+#define BCSR_INT_ETH		0x0002
+#define BCSR_INT_PC0		0x0004
+#define BCSR_INT_PC0STSCHG	0x0008
+#define BCSR_INT_PC1		0x0010
+#define BCSR_INT_PC1STSCHG	0x0020
+#define BCSR_INT_DC		0x0040
+#define BCSR_INT_FLASHBUSY	0x0080
+#define BCSR_INT_PC0INSERT	0x0100
+#define BCSR_INT_PC0EJECT	0x0200
+#define BCSR_INT_PC1INSERT	0x0400
+#define BCSR_INT_PC1EJECT	0x0800
+#define BCSR_INT_SD0INSERT	0x1000
+#define BCSR_INT_SD0EJECT	0x2000
+#define BCSR_INT_SD1INSERT	0x4000
+#define BCSR_INT_SD1EJECT	0x8000
+
+#define SMC91C111_PHYS_ADDR	0x0D000300
+#define SMC91C111_INT		PB1200_ETH_INT
+
+#define IDE_PHYS_ADDR		0x0C800000
+#define IDE_REG_SHIFT		5
+#define IDE_PHYS_LEN		(16 << IDE_REG_SHIFT)
+#define IDE_INT 		PB1200_IDE_INT
+#define IDE_DDMA_REQ		DSCR_CMD0_DMA_REQ1
+#define IDE_RQSIZE		128
+
+#define NAND_PHYS_ADDR 	0x1C000000
+
+/*
+ * Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an Au1200 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H		(18 >> 2)
+#define NAND_T_PUL		(30 >> 2)
+#define NAND_T_SU		(30 >> 2)
+#define NAND_T_WH		(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
+			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
+			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
+
+/*
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the PB1200_INT_BEGIN value.
+ *
+ *   Example: IDE bis pos is  = 64 - 64
+ *            ETH bit pos is  = 65 - 64
+ */
+enum external_pb1200_ints {
+	PB1200_INT_BEGIN	= AU1000_MAX_INTR + 1,
+
+	PB1200_IDE_INT		= PB1200_INT_BEGIN,
+	PB1200_ETH_INT,
+	PB1200_PC0_INT,
+	PB1200_PC0_STSCHG_INT,
+	PB1200_PC1_INT,
+	PB1200_PC1_STSCHG_INT,
+	PB1200_DC_INT,
+	PB1200_FLASHBUSY_INT,
+	PB1200_PC0_INSERT_INT,
+	PB1200_PC0_EJECT_INT,
+	PB1200_PC1_INSERT_INT,
+	PB1200_PC1_EJECT_INT,
+	PB1200_SD0_INSERT_INT,
+	PB1200_SD0_EJECT_INT,
+	PB1200_SD1_INSERT_INT,
+	PB1200_SD1_EJECT_INT,
+
+	PB1200_INT_END		= PB1200_INT_BEGIN + 15
+};
+
+/*
+ * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT	PB1200_PC0_INT
+#define BOARD_PC1_INT	PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
+#define NAND_CS 1
+
+#endif /* __ASM_PB1200_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1500.h b/arch/mips/include/asm/mach-pb1x00/pb1500.h
new file mode 100644
index 0000000..da51a2e
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1500.h
@@ -0,0 +1,49 @@
+/*
+ * Alchemy Semi Pb1500 Referrence Board
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1500_H
+#define __ASM_PB1500_H
+
+#define IDENT_BOARD_REG 	0xAE000000
+#define BOARD_STATUS_REG	0xAE000004
+#define PCI_BOARD_REG		0xAE000010
+#define PCMCIA_BOARD_REG	0xAE000010
+#  define PC_DEASSERT_RST	      0x80
+#  define PC_DRV_EN		      0x10
+#define PB1500_G_CONTROL	0xAE000014
+#define PB1500_RST_VDDI 	0xAE00001C
+#define PB1500_LEDS		0xAE000018
+
+#define PB1500_HEX_LED		0xAF000004
+#define PB1500_HEX_LED_BLANK	0xAF000008
+
+/* PCMCIA Pb1500 specific defines */
+#define PCMCIA_MAX_SOCK  0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
+
+#endif /* __ASM_PB1500_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
new file mode 100644
index 0000000..6704a11
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -0,0 +1,177 @@
+/*
+ * AMD Alchemy Semi PB1550 Referrence Board
+ * Board Registers defines.
+ *
+ * Copyright 2004 Embedded Edge LLC.
+ * Copyright 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1550_H
+#define __ASM_PB1550_H
+
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC3_RX
+
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define AC97_PSC_BASE		PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC2_BASE_ADDR
+#define I2S_PSC_BASE		PSC3_BASE_ADDR
+
+#define BCSR_PHYS_ADDR 0xAF000000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 pci;
+		u16 reserved5;
+	/*18*/	u16 leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_PCMCIA0FI	0x0010
+#define BCSR_STATUS_PCMCIA1FI	0x0020
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_SRAMWIDTH	0x0080
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_ROMBUSY	0x0200
+#define BCSR_STATUS_USBOTGID	0x0800
+#define BCSR_STATUS_U0RXD	0x1000
+#define BCSR_STATUS_U1RXD	0x2000
+#define BCSR_STATUS_U3RXD	0x8000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_PHY0	0x0001
+#define BCSR_RESETS_PHY1	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_WSC		0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+#define BCSR_RESETS_DMAREQ	0x8000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_PCI_M66EN		0x0001
+#define BCSR_PCI_M33		0x0100
+#define BCSR_PCI_EXTERNARB	0x0200
+#define BCSR_PCI_GPIO200RST	0x0400
+#define BCSR_PCI_CLKOUT		0x0800
+#define BCSR_PCI_CFGHOST	0x1000
+
+#define BCSR_LEDS_DECIMALS	0x00FF
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_VDDI	0x001F
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_BOTH_BANKS
+#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_BOOT_ONLY
+#elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_USER_ONLY
+#endif
+
+/*
+ * Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an SOC1550 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H		(18 >> 2)
+#define NAND_T_PUL		(30 >> 2)
+#define NAND_T_SU		(30 >> 2)
+#define NAND_T_WH		(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
+			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
+			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
+
+#define NAND_CS 1
+
+/* Should be done by YAMON */
+#define NAND_STCFG	0x00400005 /* 8-bit NAND */
+#define NAND_STTIME	0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR	0x12000FFF /* physical address 0x20000000 */
+
+#endif /* __ASM_PB1550_H */
diff --git a/arch/mips/include/asm/mach-pnx8550/cm.h b/arch/mips/include/asm/mach-pnx8550/cm.h
new file mode 100644
index 0000000..bb0a56c
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/cm.h
@@ -0,0 +1,43 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *   Clock module specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_CM_H
+#define __PNX8550_CM_H
+
+#define PNX8550_CM_BASE	0xBBE47000
+
+#define PNX8550_CM_PLL0_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000)
+#define PNX8550_CM_PLL1_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004)
+#define PNX8550_CM_PLL2_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008)
+#define PNX8550_CM_PLL3_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C)
+
+// Table not complete.....
+
+#define PNX8550_CM_PLL_BLOCKED_MASK     0x80000000
+#define PNX8550_CM_PLL_LOCK_MASK        0x40000000
+#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000
+#define PNX8550_CM_PLL_N_MASK           0x01ff0000
+#define PNX8550_CM_PLL_M_MASK           0x00003f00
+#define PNX8550_CM_PLL_P_MASK           0x0000000c
+#define PNX8550_CM_PLL_PD_MASK          0x00000002
+
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/glb.h b/arch/mips/include/asm/mach-pnx8550/glb.h
new file mode 100644
index 0000000..07aa85e
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/glb.h
@@ -0,0 +1,86 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *   PNX8550 global definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_GLB_H
+#define __PNX8550_GLB_H
+
+#define PNX8550_GLB1_BASE	0xBBE63000
+#define PNX8550_GLB2_BASE	0xBBE4d000
+#define PNX8550_RESET_BASE      0xBBE60000
+
+/* PCI Inta Output Enable Registers */
+#define PNX8550_GLB2_ENAB_INTA_O	*(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050)
+
+/* Bit 1:Enable DAC Powerdown
+     0:DACs are enabled and are working normally
+     1:DACs are powerdown
+*/
+#define PNX8550_GLB_DAC_PD      0x2
+/*   Bit 0:Enable of PCI inta output
+     0 = Disable PCI inta output
+     1 = Enable PCI inta output
+*/
+#define PNX8550_GLB_ENABLE_INTA_O 0x1
+
+/* PCI Direct Mappings */
+#define PNX8550_PCIMEM	        0x12000000
+#define PNX8550_PCIMEM_SIZE	0x08000000
+#define PNX8550_PCIIO	        0x1c000000
+#define PNX8550_PCIIO_SIZE	0x02000000	/* 32M */
+
+#define PNX8550_PORT_BASE	KSEG1
+
+// GPIO def
+#define PNX8550_GPIO_BASE	0x1Be00000
+
+#define PNX8550_GPIO_DIRQ0	 (PNX8550_GPIO_BASE + 0x104500)
+#define PNX8550_GPIO_MC1         (PNX8550_GPIO_BASE + 0x104004)
+#define PNX8550_GPIO_MC_31_BIT   30
+#define PNX8550_GPIO_MC_30_BIT   28
+#define PNX8550_GPIO_MC_29_BIT   26
+#define PNX8550_GPIO_MC_28_BIT   24
+#define PNX8550_GPIO_MC_27_BIT   22
+#define PNX8550_GPIO_MC_26_BIT   20
+#define PNX8550_GPIO_MC_25_BIT   18
+#define PNX8550_GPIO_MC_24_BIT   16
+#define PNX8550_GPIO_MC_23_BIT   14
+#define PNX8550_GPIO_MC_22_BIT   12
+#define PNX8550_GPIO_MC_21_BIT   10
+#define PNX8550_GPIO_MC_20_BIT   8
+#define PNX8550_GPIO_MC_19_BIT   6
+#define PNX8550_GPIO_MC_18_BIT   4
+#define PNX8550_GPIO_MC_17_BIT   2
+#define PNX8550_GPIO_MC_16_BIT   0
+
+#define PNX8550_GPIO_MODE_PRIMOP    0x1
+#define PNX8550_GPIO_MODE_NO_OPENDR 0x2
+#define PNX8550_GPIO_MODE_OPENDR    0x3
+
+// RESET module
+#define PNX8550_RST_CTL             *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0)
+#define PNX8550_RST_CAUSE           *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4)
+#define PNX8550_RST_EN_WATCHDOG     *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8)
+
+#define PNX8550_RST_REL_MIPS_RST_N     0x8
+#define PNX8550_RST_DO_SW_RST          0x4
+#define PNX8550_RST_REL_SYS_RST_OUT    0x2
+#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/int.h b/arch/mips/include/asm/mach-pnx8550/int.h
new file mode 100644
index 0000000..0e0668b
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/int.h
@@ -0,0 +1,140 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *   Interrupt specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_INT_H
+#define __PNX8550_INT_H
+
+#define PNX8550_GIC_BASE	0xBBE3E000
+
+#define PNX8550_GIC_PRIMASK_0	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000)
+#define PNX8550_GIC_PRIMASK_1	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004)
+#define PNX8550_GIC_VECTOR_0	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100)
+#define PNX8550_GIC_VECTOR_1	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104)
+#define PNX8550_GIC_PEND_1_31	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200)
+#define PNX8550_GIC_PEND_32_63	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204)
+#define PNX8550_GIC_PEND_64_70	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208)
+#define PNX8550_GIC_FEATURES	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300)
+#define PNX8550_GIC_REQ(x)	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4)
+#define PNX8550_GIC_MOD_ID	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC)
+
+// cp0 is two software + six hw exceptions
+#define PNX8550_INT_CP0_TOTINT	8
+#define PNX8550_INT_CP0_MIN	0
+#define PNX8550_INT_CP0_MAX	(PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1)
+
+#define MIPS_CPU_GIC_IRQ        2
+#define MIPS_CPU_TIMER_IRQ      7
+
+// GIC are 71 exceptions connected to cp0's first hardware exception
+#define PNX8550_INT_GIC_TOTINT	71
+#define PNX8550_INT_GIC_MIN	(PNX8550_INT_CP0_MAX+1)
+#define PNX8550_INT_GIC_MAX	(PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1)
+
+#define PNX8550_INT_UNDEF              (PNX8550_INT_GIC_MIN+0)
+#define PNX8550_INT_IPC_TARGET0_MIPS   (PNX8550_INT_GIC_MIN+1)
+#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2)
+#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3)
+#define PNX8550_INT_RESERVED_4         (PNX8550_INT_GIC_MIN+4)
+#define PNX8550_INT_USB                (PNX8550_INT_GIC_MIN+5)
+#define PNX8550_INT_GPIO_EQ1           (PNX8550_INT_GIC_MIN+6)
+#define PNX8550_INT_GPIO_EQ2           (PNX8550_INT_GIC_MIN+7)
+#define PNX8550_INT_GPIO_EQ3           (PNX8550_INT_GIC_MIN+8)
+#define PNX8550_INT_GPIO_EQ4           (PNX8550_INT_GIC_MIN+9)
+
+#define PNX8550_INT_GPIO_EQ5           (PNX8550_INT_GIC_MIN+10)
+#define PNX8550_INT_GPIO_EQ6           (PNX8550_INT_GIC_MIN+11)
+#define PNX8550_INT_RESERVED_12        (PNX8550_INT_GIC_MIN+12)
+#define PNX8550_INT_QVCP1              (PNX8550_INT_GIC_MIN+13)
+#define PNX8550_INT_QVCP2              (PNX8550_INT_GIC_MIN+14)
+#define PNX8550_INT_I2C1               (PNX8550_INT_GIC_MIN+15)
+#define PNX8550_INT_I2C2               (PNX8550_INT_GIC_MIN+16)
+#define PNX8550_INT_ISO_UART1          (PNX8550_INT_GIC_MIN+17)
+#define PNX8550_INT_ISO_UART2          (PNX8550_INT_GIC_MIN+18)
+#define PNX8550_INT_UART1              (PNX8550_INT_GIC_MIN+19)
+
+#define PNX8550_INT_UART2              (PNX8550_INT_GIC_MIN+20)
+#define PNX8550_INT_QNTR               (PNX8550_INT_GIC_MIN+21)
+#define PNX8550_INT_RESERVED22         (PNX8550_INT_GIC_MIN+22)
+#define PNX8550_INT_T_DSC              (PNX8550_INT_GIC_MIN+23)
+#define PNX8550_INT_M_DSC              (PNX8550_INT_GIC_MIN+24)
+#define PNX8550_INT_RESERVED25         (PNX8550_INT_GIC_MIN+25)
+#define PNX8550_INT_2D_DRAW_ENG        (PNX8550_INT_GIC_MIN+26)
+#define PNX8550_INT_MEM_BASED_SCALAR1  (PNX8550_INT_GIC_MIN+27)
+#define PNX8550_INT_VIDEO_MPEG         (PNX8550_INT_GIC_MIN+28)
+#define PNX8550_INT_VIDEO_INPUT_P1     (PNX8550_INT_GIC_MIN+29)
+
+#define PNX8550_INT_VIDEO_INPUT_P2     (PNX8550_INT_GIC_MIN+30)
+#define PNX8550_INT_SPDI1              (PNX8550_INT_GIC_MIN+31)
+#define PNX8550_INT_SPDO               (PNX8550_INT_GIC_MIN+32)
+#define PNX8550_INT_AUDIO_INPUT1       (PNX8550_INT_GIC_MIN+33)
+#define PNX8550_INT_AUDIO_OUTPUT1      (PNX8550_INT_GIC_MIN+34)
+#define PNX8550_INT_AUDIO_INPUT2       (PNX8550_INT_GIC_MIN+35)
+#define PNX8550_INT_AUDIO_OUTPUT2      (PNX8550_INT_GIC_MIN+36)
+#define PNX8550_INT_MEMBASED_SCALAR2   (PNX8550_INT_GIC_MIN+37)
+#define PNX8550_INT_VPK                (PNX8550_INT_GIC_MIN+38)
+#define PNX8550_INT_MPEG1_MIPS         (PNX8550_INT_GIC_MIN+39)
+
+#define PNX8550_INT_MPEG1_TM           (PNX8550_INT_GIC_MIN+40)
+#define PNX8550_INT_MPEG2_MIPS         (PNX8550_INT_GIC_MIN+41)
+#define PNX8550_INT_MPEG2_TM           (PNX8550_INT_GIC_MIN+42)
+#define PNX8550_INT_TS_DMA             (PNX8550_INT_GIC_MIN+43)
+#define PNX8550_INT_EDMA               (PNX8550_INT_GIC_MIN+44)
+#define PNX8550_INT_TM_DEBUG1          (PNX8550_INT_GIC_MIN+45)
+#define PNX8550_INT_TM_DEBUG2          (PNX8550_INT_GIC_MIN+46)
+#define PNX8550_INT_PCI_INTA           (PNX8550_INT_GIC_MIN+47)
+#define PNX8550_INT_CLOCK_MODULE       (PNX8550_INT_GIC_MIN+48)
+#define PNX8550_INT_PCI_XIO_INTA_PCI   (PNX8550_INT_GIC_MIN+49)
+
+#define PNX8550_INT_PCI_XIO_INTB_DMA   (PNX8550_INT_GIC_MIN+50)
+#define PNX8550_INT_PCI_XIO_INTC_GPPM  (PNX8550_INT_GIC_MIN+51)
+#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52)
+#define PNX8550_INT_DVD_CSS            (PNX8550_INT_GIC_MIN+53)
+#define PNX8550_INT_VLD                (PNX8550_INT_GIC_MIN+54)
+#define PNX8550_INT_GPIO_TSU_7_0       (PNX8550_INT_GIC_MIN+55)
+#define PNX8550_INT_GPIO_TSU_15_8      (PNX8550_INT_GIC_MIN+56)
+#define PNX8550_INT_GPIO_CTU_IR        (PNX8550_INT_GIC_MIN+57)
+#define PNX8550_INT_GPIO0              (PNX8550_INT_GIC_MIN+58)
+#define PNX8550_INT_GPIO1              (PNX8550_INT_GIC_MIN+59)
+
+#define PNX8550_INT_GPIO2              (PNX8550_INT_GIC_MIN+60)
+#define PNX8550_INT_GPIO3              (PNX8550_INT_GIC_MIN+61)
+#define PNX8550_INT_GPIO4              (PNX8550_INT_GIC_MIN+62)
+#define PNX8550_INT_GPIO5              (PNX8550_INT_GIC_MIN+63)
+#define PNX8550_INT_GPIO6              (PNX8550_INT_GIC_MIN+64)
+#define PNX8550_INT_GPIO7              (PNX8550_INT_GIC_MIN+65)
+#define PNX8550_INT_PMAN_SECURITY      (PNX8550_INT_GIC_MIN+66)
+#define PNX8550_INT_I2C3               (PNX8550_INT_GIC_MIN+67)
+#define PNX8550_INT_RESERVED_68        (PNX8550_INT_GIC_MIN+68)
+#define PNX8550_INT_SPDI2              (PNX8550_INT_GIC_MIN+69)
+
+#define PNX8550_INT_I2C4               (PNX8550_INT_GIC_MIN+70)
+
+// Timer are 3 exceptions connected to cp0's 7th hardware exception
+#define PNX8550_INT_TIMER_TOTINT       3
+#define PNX8550_INT_TIMER_MIN	       (PNX8550_INT_GIC_MAX+1)
+#define PNX8550_INT_TIMER_MAX          (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1)
+
+#define PNX8550_INT_TIMER1             (PNX8550_INT_TIMER_MIN+0)
+#define PNX8550_INT_TIMER2             (PNX8550_INT_TIMER_MIN+1)
+#define PNX8550_INT_TIMER3             (PNX8550_INT_TIMER_MIN+2)
+#define PNX8550_INT_WATCHDOG           PNX8550_INT_TIMER3
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h
new file mode 100644
index 0000000..bdde00c
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h
@@ -0,0 +1,262 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ */
+#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_KERNEL_ENTRY_INIT_H
+
+#include <asm/cacheops.h>
+#include <asm/addrspace.h>
+
+#define CO_CONFIGPR_VALID  0x3F1F41FF    /* valid bits to write to ConfigPR */
+#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;
+#define CACHE_OPC      0xBC000000  /* MIPS cache instruction opcode */
+#define ICACHE_LINE_SIZE        32      /* Instruction cache line size bytes */
+#define DCACHE_LINE_SIZE        32      /* Data cache line size in bytes */
+
+#define ICACHE_SET_COUNT        256     /* Instruction cache set count */
+#define DCACHE_SET_COUNT        128     /* Data cache set count */
+
+#define ICACHE_SET_SIZE         (ICACHE_SET_COUNT * ICACHE_LINE_SIZE)
+#define DCACHE_SET_SIZE         (DCACHE_SET_COUNT * DCACHE_LINE_SIZE)
+
+	.macro	kernel_entry_setup
+	.set	push
+	.set	noreorder
+	/*
+	 * PNX8550 entry point, when running a non compressed
+	 * kernel. When loading a zImage, the head.S code in
+	 * arch/mips/zboot/pnx8550 will init the caches and,
+	 * decompress the kernel, and branch to kernel_entry.
+		 */
+cache_begin:	li	t0, (1<<28)
+	mtc0	t0, CP0_STATUS /* cp0 usable */
+	HAZARD_CP0
+
+	mtc0 	zero, CP0_CAUSE
+	HAZARD_CP0
+
+
+	/* Set static virtual to phys address translation and TLB disabled */
+	mfc0 	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+
+	and	t0, ~((1<<19) | (1<<20))     /* TLB/MAP cleared */
+	mtc0	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+
+	/* CPU boots with kseg0 cache algo set to 0x2 -- uncached */
+
+	init_icache
+	nop
+	init_dcache
+	nop
+
+	cachePr4450ICReset
+	nop
+
+	cachePr4450DCReset
+	nop
+
+	/* read ConfigPR into t0 */
+	mfc0	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+
+	/*  enable the TLB */
+	or      t0, (1<<19)
+
+	/* disable the ICACHE: at least 10x slower */
+	/* or      t0, (1<<26) */
+
+	/* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set  */
+	/* or      t0, (1<<27) */
+
+	and	t0, CO_CONFIGPR_VALID
+
+	/* enable TLB. */
+	mtc0	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+cache_end:
+	/* Setup CMEM_0 to MMIO address space, 2MB */
+	lui    t0, 0x1BE0
+	addi   t0, t0, 0x3
+	mtc0   $8, $22, 4
+	nop
+
+	/* Setup CMEM_1, 128MB */
+	lui    t0, 0x1000
+	addi   t0, t0, 0xf
+	mtc0   $8, $22, 5
+	nop
+
+
+	/* Setup CMEM_2, 32MB */
+	lui    t0, 0x1C00
+	addi   t0, t0, 0xb
+	mtc0   $8, $22, 6
+	nop
+
+	/* Setup CMEM_3, 0MB */
+	lui    t0, 0x0
+	addi   t0, t0, 0x0
+	mtc0   $8, $22, 7
+	nop
+
+	/* Enable cache */
+	mfc0	t0, CP0_CONFIG
+	HAZARD_CP0
+	and	t0, t0, 0xFFFFFFF8
+	or	t0, t0, 3
+	mtc0	t0, CP0_CONFIG
+	HAZARD_CP0
+	.set	pop
+	.endm
+
+	.macro	init_icache
+	.set	push
+	.set	noreorder
+
+	/* Get Cache Configuration */
+	mfc0	t3, CP0_CONFIG, 1
+	HAZARD_CP0
+
+	/* get cache Line size */
+
+	srl   t1, t3, 19   /* C0_CONFIGPR_IL_SHIFT */
+	andi  t1, t1, 0x7  /* C0_CONFIGPR_IL_MASK */
+	beq   t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */
+	nop
+	addiu t0, t1, 1
+	ori   t1, zero, 1
+	sllv  t1, t1, t0
+
+	/* get max cache Index */
+	srl   t2, t3, 22  /* C0_CONFIGPR_IS_SHIFT */
+	andi  t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */
+	addiu t0, t2, 6
+	ori   t2, zero, 1
+	sllv  t2, t2, t0
+
+	/* get max cache way */
+	srl   t3, t3, 16  /* C0_CONFIGPR_IA_SHIFT */
+	andi  t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */
+	addiu t3, t3, 1
+
+	/* total no of cache lines */
+	multu t2, t3             /* max index * max way */
+	mflo  t2
+	addiu t2, t2, -1
+
+	move  t0, zero
+pr4450_next_instruction_cache_set:
+	cache  Index_Invalidate_I, 0(t0)
+	addu  t0, t0, t1         /* add bytes in a line */
+	bne   t2, zero, pr4450_next_instruction_cache_set
+	addiu t2, t2, -1   /* reduce no of lines to invalidate by one */
+pr4450_instr_cache_invalidated:
+	.set	pop
+	.endm
+
+	.macro	init_dcache
+	.set	push
+	.set	noreorder
+	move t1, zero
+
+	/* Store Tag Information */
+	mtc0	zero, CP0_TAGLO, 0
+	HAZARD_CP0
+
+	mtc0	zero, CP0_TAGHI, 0
+	HAZARD_CP0
+
+	/* Cache size is 16384 = 512 lines x 32 bytes per line */
+	or       t2, zero, (128*4)-1  /* 512 lines  */
+	/* Invalidate all lines */
+2:
+	cache Index_Store_Tag_D, 0(t1)
+	addiu    t2, t2, -1
+	bne      t2, zero, 2b
+	addiu    t1, t1, 32        /* 32 bytes in a line */
+	.set pop
+	.endm
+
+	.macro	cachePr4450ICReset
+	.set	push
+	.set	noreorder
+
+	/* Save CP0 status reg on entry; */
+	/* disable interrupts during cache reset */
+	mfc0    t0, CP0_STATUS      /* T0 = interrupt status on entry */
+	HAZARD_CP0
+
+	mtc0    zero, CP0_STATUS   /* disable CPU interrupts */
+	HAZARD_CP0
+
+	or      t1, zero, zero              /* T1 = starting cache index (0) */
+	ori     t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */
+
+	icache_invd_loop:
+	/* 9 == register t1 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+		(0 * ICACHE_SET_SIZE)  /* invalidate inst cache WAY0 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+		(1 * ICACHE_SET_SIZE)  /* invalidate inst cache WAY1 */
+
+	addiu   t1, t1, ICACHE_LINE_SIZE    /* T1 = next cache line index */
+	bne     t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */
+	addiu   t2, t2, -1        /* decrement T2 set cnt (delay slot) */
+
+	/* Initialize the latches in the instruction cache tag */
+	/* that drive the way selection tri-state bus drivers, by doing a */
+	/* dummy load while the instruction cache is still disabled. */
+	/* TODO: Is this needed ? */
+	la      t1, KSEG0            /* T1 = cached memory base address */
+	lw      zero, 0x0000(t1)      /* (dummy read of first memory word) */
+
+	mtc0    t0, CP0_STATUS        /* restore interrupt status on entry */
+	HAZARD_CP0
+	.set	pop
+	.endm
+
+	.macro	cachePr4450DCReset
+	.set	push
+	.set	noreorder
+	mfc0    t0, CP0_STATUS           /* T0 = interrupt status on entry */
+	HAZARD_CP0
+	mtc0    zero, CP0_STATUS         /* disable CPU interrupts */
+	HAZARD_CP0
+
+	/* Writeback/invalidate entire data cache sets/ways/lines */
+	or      t1, zero, zero              /* T1 = starting cache index (0) */
+	ori     t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */
+
+	dcache_wbinvd_loop:
+	/* 9 == register t1 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(0 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY0 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(1 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY1 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(2 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY2 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(3 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY3 */
+
+	addiu   t1, t1, DCACHE_LINE_SIZE  /* T1 = next data cache line index */
+	bne     t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */
+	addiu   t2, t2, -1          /* decrement T2 set cnt (delay slot) */
+
+	/* Initialize the latches in the data cache tag that drive the way
+	selection tri-state bus drivers, by doing a dummy load while the
+	data cache is still in the disabled mode.  TODO: Is this needed ? */
+	la      t1, KSEG0            /* T1 = cached memory base address */
+	lw      zero, 0x0000(t1)      /* (dummy read of first memory word) */
+
+	mtc0    t0, CP0_STATUS       /* restore interrupt status on entry */
+	HAZARD_CP0
+	.set	pop
+	.endm
+
+#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-pnx8550/nand.h b/arch/mips/include/asm/mach-pnx8550/nand.h
new file mode 100644
index 0000000..aefbc51
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/nand.h
@@ -0,0 +1,121 @@
+#ifndef __PNX8550_NAND_H
+#define __PNX8550_NAND_H
+
+#define PNX8550_NAND_BASE_ADDR   0x10000000
+#define PNX8550_PCIXIO_BASE	 0xBBE40000
+
+#define PNX8550_DMA_EXT_ADDR     *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800)
+#define PNX8550_DMA_INT_ADDR     *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804)
+#define PNX8550_DMA_TRANS_SIZE   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808)
+#define PNX8550_DMA_CTRL         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c)
+#define PNX8550_XIO_SEL0         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814)
+#define PNX8550_GPXIO_ADDR       *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820)
+#define PNX8550_GPXIO_WR         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824)
+#define PNX8550_GPXIO_RD         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828)
+#define PNX8550_GPXIO_CTRL       *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C)
+#define PNX8550_XIO_FLASH_CTRL   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830)
+#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0)
+#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4)
+#define PNX8550_GPXIO_INT_CLEAR  *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8)
+#define PNX8550_DMA_INT_STATUS   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0)
+#define PNX8550_DMA_INT_ENABLE   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4)
+#define PNX8550_DMA_INT_CLEAR    *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8)
+
+#define PNX8550_XIO_SEL0_EN_16BIT    0x00800000
+#define PNX8550_XIO_SEL0_USE_ACK     0x00400000
+#define PNX8550_XIO_SEL0_REN_HIGH    0x00100000
+#define PNX8550_XIO_SEL0_REN_LOW     0x00040000
+#define PNX8550_XIO_SEL0_WEN_HIGH    0x00010000
+#define PNX8550_XIO_SEL0_WEN_LOW     0x00004000
+#define PNX8550_XIO_SEL0_WAIT        0x00000200
+#define PNX8550_XIO_SEL0_OFFSET      0x00000020
+#define PNX8550_XIO_SEL0_TYPE_68360  0x00000000
+#define PNX8550_XIO_SEL0_TYPE_NOR    0x00000008
+#define PNX8550_XIO_SEL0_TYPE_NAND   0x00000010
+#define PNX8550_XIO_SEL0_TYPE_IDE    0x00000018
+#define PNX8550_XIO_SEL0_SIZE_8MB    0x00000000
+#define PNX8550_XIO_SEL0_SIZE_16MB   0x00000002
+#define PNX8550_XIO_SEL0_SIZE_32MB   0x00000004
+#define PNX8550_XIO_SEL0_SIZE_64MB   0x00000006
+#define PNX8550_XIO_SEL0_ENAB        0x00000001
+
+#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT)  | \
+                              (PNX8550_XIO_SEL0_REN_HIGH*0)| \
+	                      (PNX8550_XIO_SEL0_REN_LOW*2) | \
+	                      (PNX8550_XIO_SEL0_WEN_HIGH*0)| \
+                              (PNX8550_XIO_SEL0_WEN_LOW*2) | \
+	                      (PNX8550_XIO_SEL0_WAIT*4)    | \
+			      (PNX8550_XIO_SEL0_OFFSET*0)  | \
+			      (PNX8550_XIO_SEL0_TYPE_NAND) | \
+			      (PNX8550_XIO_SEL0_SIZE_32MB) | \
+			      (PNX8550_XIO_SEL0_ENAB))
+
+#define PNX8550_GPXIO_PENDING        0x00000200
+#define PNX8550_GPXIO_DONE           0x00000100
+#define PNX8550_GPXIO_CLR_DONE       0x00000080
+#define PNX8550_GPXIO_INIT           0x00000040
+#define PNX8550_GPXIO_READ_CMD       0x00000010
+#define PNX8550_GPXIO_BEN            0x0000000F
+
+#define PNX8550_XIO_FLASH_64MB       0x00200000
+#define PNX8550_XIO_FLASH_INC_DATA   0x00100000
+#define PNX8550_XIO_FLASH_CMD_PH     0x000C0000
+#define PNX8550_XIO_FLASH_CMD_PH2    0x00080000
+#define PNX8550_XIO_FLASH_CMD_PH1    0x00040000
+#define PNX8550_XIO_FLASH_CMD_PH0    0x00000000
+#define PNX8550_XIO_FLASH_ADR_PH     0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH3    0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH2    0x00020000
+#define PNX8550_XIO_FLASH_ADR_PH1    0x00010000
+#define PNX8550_XIO_FLASH_ADR_PH0    0x00000000
+#define PNX8550_XIO_FLASH_CMD_B(x)   ((x<<8) & 0x0000FF00)
+#define PNX8550_XIO_FLASH_CMD_A(x)   (x & 0x000000FF)
+
+#define PNX8550_XIO_INT_ACK          0x00004000
+#define PNX8550_XIO_INT_COMPL        0x00002000
+#define PNX8550_XIO_INT_NONSUP       0x00000200
+#define PNX8550_XIO_INT_ABORT        0x00000004
+
+#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400
+#define PNX8550_DMA_CTRL_SND2XIO     0x00000200
+#define PNX8550_DMA_CTRL_FIX_ADDR    0x00000100
+#define PNX8550_DMA_CTRL_BURST_8     0x00000000
+#define PNX8550_DMA_CTRL_BURST_16    0x00000020
+#define PNX8550_DMA_CTRL_BURST_32    0x00000040
+#define PNX8550_DMA_CTRL_BURST_64    0x00000060
+#define PNX8550_DMA_CTRL_BURST_128   0x00000080
+#define PNX8550_DMA_CTRL_BURST_256   0x000000A0
+#define PNX8550_DMA_CTRL_BURST_512   0x000000C0
+#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0
+#define PNX8550_DMA_CTRL_INIT_DMA    0x00000010
+#define PNX8550_DMA_CTRL_CMD_TYPE    0x0000000F
+
+/* see PCI system arch, page 100 for the full list: */
+#define PNX8550_DMA_CTRL_PCI_CMD_READ    0x00000006
+#define PNX8550_DMA_CTRL_PCI_CMD_WRITE   0x00000007
+
+#define PNX8550_DMA_INT_STAT_ACK_DONE	(1<<14)
+#define PNX8550_DMA_INT_STAT_DMA_DONE	(1<<12)
+#define PNX8550_DMA_INT_STAT_DMA_ERR	(1<<9)
+#define PNX8550_DMA_INT_STAT_PERR5	(1<<5)
+#define PNX8550_DMA_INT_STAT_PERR4	(1<<4)
+#define PNX8550_DMA_INT_STAT_M_ABORT	(1<<2)
+#define PNX8550_DMA_INT_STAT_T_ABORT	(1<<1)
+
+#define PNX8550_DMA_INT_EN_ACK_DONE	(1<<14)
+#define PNX8550_DMA_INT_EN_DMA_DONE	(1<<12)
+#define PNX8550_DMA_INT_EN_DMA_ERR	(1<<9)
+#define PNX8550_DMA_INT_EN_PERR5	(1<<5)
+#define PNX8550_DMA_INT_EN_PERR4	(1<<4)
+#define PNX8550_DMA_INT_EN_M_ABORT	(1<<2)
+#define PNX8550_DMA_INT_EN_T_ABORT	(1<<1)
+
+#define PNX8550_DMA_INT_CLR_ACK_DONE	(1<<14)
+#define PNX8550_DMA_INT_CLR_DMA_DONE	(1<<12)
+#define PNX8550_DMA_INT_CLR_DMA_ERR	(1<<9)
+#define PNX8550_DMA_INT_CLR_PERR5	(1<<5)
+#define PNX8550_DMA_INT_CLR_PERR4	(1<<4)
+#define PNX8550_DMA_INT_CLR_M_ABORT	(1<<2)
+#define PNX8550_DMA_INT_CLR_T_ABORT	(1<<1)
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/pci.h b/arch/mips/include/asm/mach-pnx8550/pci.h
new file mode 100644
index 0000000..b921508
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/pci.h
@@ -0,0 +1,185 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PCI specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_PCI_H
+#define __PNX8550_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+#define PCI_CMD_IOR                     0x20
+#define PCI_CMD_IOW                     0x30
+#define PCI_CMD_CONFIG_READ             0xa0
+#define PCI_CMD_CONFIG_WRITE            0xb0
+
+#define PCI_IO_TIMEOUT                  1000
+#define PCI_IO_RETRY			5
+/* Timeout for IO and CFG accesses.
+   This is in 1/1024 th of a jiffie(=10ms)
+   i.e. approx 10us */
+#define PCI_IO_JIFFIES_TIMEOUT          40
+#define PCI_IO_JIFFIES_SHIFT            10
+
+#define PCI_BYTE_ENABLE_MASK		0x0000000f
+#define PCI_CFG_BUS_SHIFT               16
+#define PCI_CFG_FUNC_SHIFT              8
+#define PCI_CFG_REG_SHIFT               2
+
+#define PCI_BASE                  0x1be00000
+#define PCI_SETUP                 0x00040010
+#define PCI_DIS_REQGNT           (1<<30)
+#define PCI_DIS_REQGNTA          (1<<29)
+#define PCI_DIS_REQGNTB          (1<<28)
+#define PCI_D2_SUPPORT           (1<<27)
+#define PCI_D1_SUPPORT           (1<<26)
+#define PCI_EN_TA                (1<<24)
+#define PCI_EN_PCI2MMI           (1<<23)
+#define PCI_EN_XIO               (1<<22)
+#define PCI_BASE18_PREF          (1<<21)
+#define SIZE_16M                 0x3
+#define SIZE_32M                 0x4
+#define SIZE_64M                 0x5
+#define SIZE_128M                0x6
+#define PCI_SETUP_BASE18_SIZE(X) (X<<18)
+#define PCI_SETUP_BASE18_EN      (1<<17)
+#define PCI_SETUP_BASE14_PREF    (1<<16)
+#define PCI_SETUP_BASE14_SIZE(X) (X<<12)
+#define PCI_SETUP_BASE14_EN      (1<<11)
+#define PCI_SETUP_BASE10_PREF    (1<<10)
+#define PCI_SETUP_BASE10_SIZE(X) (X<<7)
+#define PCI_SETUP_CFGMANAGE_EN   (1<<1)
+#define PCI_SETUP_PCIARB_EN      (1<<0)
+
+#define PCI_CTRL                  0x040014
+#define PCI_SWPB_DCS_PCI         (1<<16)
+#define PCI_SWPB_PCI_PCI         (1<<15)
+#define PCI_SWPB_PCI_DCS         (1<<14)
+#define PCI_REG_WR_POST          (1<<13)
+#define PCI_XIO_WR_POST          (1<<12)
+#define PCI_PCI2_WR_POST         (1<<13)
+#define PCI_PCI1_WR_POST         (1<<12)
+#define PCI_SERR_SEEN            (1<<11)
+#define PCI_B10_SPEC_RD          (1<<6)
+#define PCI_B14_SPEC_RD          (1<<5)
+#define PCI_B18_SPEC_RD          (1<<4)
+#define PCI_B10_NOSUBWORD        (1<<3)
+#define PCI_B14_NOSUBWORD        (1<<2)
+#define PCI_B18_NOSUBWORD        (1<<1)
+#define PCI_RETRY_TMREN          (1<<0)
+
+#define PCI_BASE1_LO              0x040018
+#define PCI_BASE1_HI              0x04001C
+#define PCI_BASE2_LO              0x040020
+#define PCI_BASE2_HI              0x040024
+#define PCI_RDLIFETIM             0x040028
+#define PCI_GPPM_ADDR             0x04002C
+#define PCI_GPPM_WDAT             0x040030
+#define PCI_GPPM_RDAT             0x040034
+#define PCI_GPPM_CTRL             0x040038
+#define GPPM_DONE                (1<<10)
+#define INIT_PCI_CYCLE           (1<<9)
+#define GPPM_CMD(X)              (((X)&0xf)<<4)
+#define GPPM_BYTEEN(X)           ((X)&0xf)
+#define PCI_UNLOCKREG             0x04003C
+#define UNLOCK_SSID(X)           (((X)&0xff)<<8)
+#define UNLOCK_SETUP(X)          (((X)&0xff)<<0)
+#define UNLOCK_MAGIC             0xCA
+#define PCI_DEV_VEND_ID           0x040040
+#define DEVICE_ID(X)             (((X)>>16)&0xffff)
+#define VENDOR_ID(X)             (((X)&0xffff))
+#define PCI_CFG_CMDSTAT           0x040044
+#define PCI_CFG_STATUS(X)            (((X)>>16)&0xffff)
+#define PCI_CFG_COMMAND(X)           ((X)&0xffff)
+#define PCI_CLASS_REV             0x040048
+#define PCI_CLASSCODE(X)         (((X)>>8)&0xffffff)
+#define PCI_REVID(X)             ((X)&0xff)
+#define PCI_LAT_TMR     0x04004c
+#define PCI_BASE10      0x040050
+#define PCI_BASE14      0x040054
+#define PCI_BASE18      0x040058
+#define PCI_SUBSYS_ID   0x04006c
+#define PCI_CAP_PTR     0x040074
+#define PCI_CFG_MISC    0x04007c
+#define PCI_PMC         0x040080
+#define PCI_PWR_STATE   0x040084
+#define PCI_IO          0x040088
+#define PCI_SLVTUNING   0x04008C
+#define PCI_DMATUNING   0x040090
+#define PCI_DMAEADDR    0x040800
+#define PCI_DMAIADDR    0x040804
+#define PCI_DMALEN      0x040808
+#define PCI_DMACTRL     0x04080C
+#define PCI_XIOCTRL     0x040810
+#define PCI_SEL0PROF    0x040814
+#define PCI_SEL1PROF    0x040818
+#define PCI_SEL2PROF    0x04081C
+#define PCI_GPXIOADDR   0x040820
+#define PCI_NANDCTRLS   0x400830
+#define PCI_SEL3PROF    0x040834
+#define PCI_SEL4PROF    0x040838
+#define PCI_GPXIO_STAT  0x040FB0
+#define PCI_GPXIO_IMASK 0x040FB4
+#define PCI_GPXIO_ICLR  0x040FB8
+#define PCI_GPXIO_ISET  0x040FBC
+#define PCI_GPPM_STATUS 0x040FC0
+#define GPPM_DONE      (1<<10)
+#define GPPM_ERR       (1<<9)
+#define GPPM_MPAR_ERR  (1<<8)
+#define GPPM_PAR_ERR   (1<<7)
+#define GPPM_R_MABORT  (1<<2)
+#define GPPM_R_TABORT  (1<<1)
+#define PCI_GPPM_IMASK  0x040FC4
+#define PCI_GPPM_ICLR   0x040FC8
+#define PCI_GPPM_ISET   0x040FCC
+#define PCI_DMA_STATUS  0x040FD0
+#define PCI_DMA_IMASK   0x040FD4
+#define PCI_DMA_ICLR    0x040FD8
+#define PCI_DMA_ISET    0x040FDC
+#define PCI_ISTATUS     0x040FE0
+#define PCI_IMASK       0x040FE4
+#define PCI_ICLR        0x040FE8
+#define PCI_ISET        0x040FEC
+#define PCI_MOD_ID      0x040FFC
+
+/*
+ *  PCI configuration cycle AD bus definition
+ */
+/* Type 0 */
+#define PCI_CFG_TYPE0_REG_SHF           0
+#define PCI_CFG_TYPE0_FUNC_SHF          8
+
+/* Type 1 */
+#define PCI_CFG_TYPE1_REG_SHF           0
+#define PCI_CFG_TYPE1_FUNC_SHF          8
+#define PCI_CFG_TYPE1_DEV_SHF           11
+#define PCI_CFG_TYPE1_BUS_SHF           16
+
+/*
+ *  Ethernet device DP83816 definition
+ */
+#define DP83816_IRQ_ETHER               66
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/uart.h b/arch/mips/include/asm/mach-pnx8550/uart.h
new file mode 100644
index 0000000..ad7608d
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/uart.h
@@ -0,0 +1,30 @@
+#ifndef __IP3106_UART_H
+#define __IP3106_UART_H
+
+#include <int.h>
+
+/* early macros for kgdb use. fixme: clean this up */
+
+#define UART_BASE		0xbbe4a000	/* PNX8550 */
+
+#define PNX8550_UART_PORT0	(UART_BASE)
+#define PNX8550_UART_PORT1	(UART_BASE + 0x1000)
+
+#define PNX8550_UART_INT(x)		(PNX8550_INT_GIC_MIN+19+x)
+#define IRQ_TO_UART(x)			(x-PNX8550_INT_GIC_MIN-19)
+
+/* early macros needed for prom/kgdb */
+
+#define ip3106_lcr(base, port)    *(volatile u32 *)(base+(port*0x1000) + 0x000)
+#define ip3106_mcr(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0x004)
+#define ip3106_baud(base, port)  *(volatile u32 *)(base+(port*0x1000) + 0x008)
+#define ip3106_cfg(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0x00C)
+#define ip3106_fifo(base, port)	 *(volatile u32 *)(base+(port*0x1000) + 0x028)
+#define ip3106_istat(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE0)
+#define ip3106_ien(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0xFE4)
+#define ip3106_iclr(base, port)  *(volatile u32 *)(base+(port*0x1000) + 0xFE8)
+#define ip3106_iset(base, port)  *(volatile u32 *)(base+(port*0x1000) + 0xFEC)
+#define ip3106_pd(base, port)    *(volatile u32 *)(base+(port*0x1000) + 0xFF4)
+#define ip3106_mid(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0xFFC)
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/usb.h b/arch/mips/include/asm/mach-pnx8550/usb.h
new file mode 100644
index 0000000..483b7fc
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/usb.h
@@ -0,0 +1,32 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *  USB specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_USB_H
+#define __PNX8550_USB_H
+
+/*
+ * USB Host controller
+ */
+
+#define PNX8550_USB_OHCI_OP_BASE	0x1be48000
+#define PNX8550_USB_OHCI_OP_LEN	        0x1000
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/war.h b/arch/mips/include/asm/mach-pnx8550/war.h
new file mode 100644
index 0000000..d0458dd
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_PNX8550_WAR_H
+#define __ASM_MIPS_MACH_PNX8550_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
diff --git a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
new file mode 100644
index 0000000..f3bc7ef
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
@@ -0,0 +1,81 @@
+/*
+ *  IDT RC32434 specific CPU feature overrides
+ *
+ *  Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+#ifndef __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The IDT RC32434 SOC has a built-in MIPS 4Kc core.
+ */
+#define cpu_has_tlb			1
+#define cpu_has_4kex			1
+#define cpu_has_3k_cache		0
+#define cpu_has_4k_cache		1
+#define cpu_has_tx39_cache		0
+#define cpu_has_sb1_cache		0
+#define cpu_has_fpu			0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			1
+#define cpu_has_watch			1
+#define cpu_has_divec			1
+#define cpu_has_vce			0
+#define cpu_has_cache_cdex_p		0
+#define cpu_has_cache_cdex_s		0
+#define cpu_has_prefetch		1
+#define cpu_has_mcheck			1
+#define cpu_has_ejtag			1
+#define cpu_has_llsc			1
+
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+
+#define cpu_has_vtag_icache		0
+/* #define cpu_has_dc_aliases		? */
+/* #define cpu_has_ic_fills_f_dc	? */
+/* #define cpu_has_pindexed_dcache	? */
+
+/* #define cpu_icache_snoops_remote_store	? */
+
+#define cpu_has_mips32r1		1
+#define cpu_has_mips32r2		0
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+
+#define cpu_has_dsp			0
+#define cpu_has_mipsmt			0
+
+/* #define cpu_has_nofpuex		? */
+#define cpu_has_64bits			0
+#define cpu_has_64bit_zero_reg		0
+#define cpu_has_64bit_gp_regs		0
+#define cpu_has_64bit_addresses		0
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()		16
+#define cpu_icache_line_size()		16
+
+#endif /* __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-rc32434/ddr.h b/arch/mips/include/asm/mach-rc32434/ddr.h
new file mode 100644
index 0000000..291e2cf
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/ddr.h
@@ -0,0 +1,141 @@
+/*
+ *  Definitions for the DDR registers
+ *
+ *  Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _ASM_RC32434_DDR_H_
+#define _ASM_RC32434_DDR_H_
+
+#include <asm/mach-rc32434/rb.h>
+
+/* DDR register structure */
+struct ddr_ram {
+	u32 ddrbase;
+	u32 ddrmask;
+	u32 res1;
+	u32 res2;
+	u32 ddrc;
+	u32 ddrabase;
+	u32 ddramask;
+	u32 ddramap;
+	u32 ddrcust;
+	u32 ddrrdc;
+	u32 ddrspare;
+};
+
+#define DDR0_PHYS_ADDR		0x18018000
+
+/* DDR banks masks */
+#define DDR_MASK		0xffff0000
+#define DDR0_BASE_MSK		DDR_MASK
+#define DDR1_BASE_MSK		DDR_MASK
+
+/* DDR bank0 registers */
+#define RC32434_DDR0_ATA_BIT		5
+#define RC32434_DDR0_ATA_MSK		0x000000E0
+#define RC32434_DDR0_DBW_BIT		8
+#define RC32434_DDR0_DBW_MSK		0x00000100
+#define RC32434_DDR0_WR_BIT		9
+#define RC32434_DDR0_WR_MSK		0x00000600
+#define RC32434_DDR0_PS_BIT		11
+#define RC32434_DDR0_PS_MSK		0x00001800
+#define RC32434_DDR0_DTYPE_BIT		13
+#define RC32434_DDR0_DTYPE_MSK		0x0000e000
+#define RC32434_DDR0_RFC_BIT		16
+#define RC32434_DDR0_RFC_MSK		0x000f0000
+#define RC32434_DDR0_RP_BIT		20
+#define RC32434_DDR0_RP_MSK		0x00300000
+#define RC32434_DDR0_AP_BIT		22
+#define RC32434_DDR0_AP_MSK		0x00400000
+#define RC32434_DDR0_RCD_BIT		23
+#define RC32434_DDR0_RCD_MSK		0x01800000
+#define RC32434_DDR0_CL_BIT		25
+#define RC32434_DDR0_CL_MSK		0x06000000
+#define RC32434_DDR0_DBM_BIT		27
+#define RC32434_DDR0_DBM_MSK		0x08000000
+#define RC32434_DDR0_SDS_BIT		28
+#define RC32434_DDR0_SDS_MSK		0x10000000
+#define RC32434_DDR0_ATP_BIT		29
+#define RC32434_DDR0_ATP_MSK		0x60000000
+#define RC32434_DDR0_RE_BIT		31
+#define RC32434_DDR0_RE_MSK		0x80000000
+
+/* DDR bank C registers */
+#define RC32434_DDRC_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_DDRC_CES_BIT		0
+#define RC32434_DDRC_ACE_BIT		1
+
+/* Custom DDR bank registers */
+#define RC32434_DCST_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_DCST_CS_BIT		0
+#define RC32434_DCST_CS_MSK		0x00000003
+#define RC32434_DCST_WE_BIT		2
+#define RC32434_DCST_RAS_BIT		3
+#define RC32434_DCST_CAS_BIT		4
+#define RC32434_DSCT_CKE_BIT		5
+#define RC32434_DSCT_BA_BIT		6
+#define RC32434_DSCT_BA_MSK		0x000000c0
+
+/* DDR QSC registers */
+#define RC32434_QSC_DM_BIT		0
+#define RC32434_QSC_DM_MSK		0x00000003
+#define RC32434_QSC_DQSBS_BIT		2
+#define RC32434_QSC_DQSBS_MSK		0x000000fc
+#define RC32434_QSC_DB_BIT		8
+#define RC32434_QSC_DB_MSK		0x00000100
+#define RC32434_QSC_DBSP_BIT		9
+#define RC32434_QSC_DBSP_MSK		0x01fffe00
+#define RC32434_QSC_BDP_BIT		25
+#define RC32434_QSC_BDP_MSK		0x7e000000
+
+/* DDR LLC registers */
+#define RC32434_LLC_EAO_BIT		0
+#define RC32434_LLC_EAO_MSK		0x00000001
+#define RC32434_LLC_EO_BIT		1
+#define RC32434_LLC_EO_MSK		0x0000003e
+#define RC32434_LLC_FS_BIT		6
+#define RC32434_LLC_FS_MSK		0x000000c0
+#define RC32434_LLC_AS_BIT		8
+#define RC32434_LLC_AS_MSK		0x00000700
+#define RC32434_LLC_SP_BIT		11
+#define RC32434_LLC_SP_MSK		0x001ff800
+
+/* DDR LLFC registers */
+#define RC32434_LLFC_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_LLFC_MEN_BIT		0
+#define RC32434_LLFC_EAN_BIT		1
+#define RC32434_LLFC_FF_BIT		2
+
+/* DDR DLLTA registers */
+#define RC32434_DLLTA_ADDR_BIT		2
+#define RC32434_DLLTA_ADDR_MSK		0xfffffffc
+
+/* DDR DLLED registers */
+#define RC32434_DLLED_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_DLLED_DBE_BIT		0
+#define RC32434_DLLED_DTE_BIT		1
+
+#endif  /* _ASM_RC32434_DDR_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/dma.h b/arch/mips/include/asm/mach-rc32434/dma.h
new file mode 100644
index 0000000..5f898b5
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/dma.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ *		All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date   : 20011005
+ */
+
+#ifndef __ASM_RC32434_DMA_H
+#define __ASM_RC32434_DMA_H
+
+#include <asm/mach-rc32434/rb.h>
+
+#define DMA0_BASE_ADDR			0x18040000
+
+/*
+ * DMA descriptor (in physical memory).
+ */
+
+struct dma_desc {
+	u32 control;			/* Control. use DMAD_* */
+	u32 ca;				/* Current Address. */
+	u32 devcs;			/* Device control and status. */
+	u32 link;			/* Next descriptor in chain. */
+};
+
+#define DMA_DESC_SIZ			sizeof(struct dma_desc)
+#define DMA_DESC_COUNT_BIT		0
+#define DMA_DESC_COUNT_MSK		0x0003ffff
+#define DMA_DESC_DS_BIT			20
+#define DMA_DESC_DS_MSK			0x00300000
+
+#define DMA_DESC_DEV_CMD_BIT		22
+#define DMA_DESC_DEV_CMD_MSK		0x01c00000
+
+/* DMA command sizes */
+#define DMA_DESC_DEV_CMD_BYTE		0
+#define DMA_DESC_DEV_CMD_HLF_WD		1
+#define DMA_DESC_DEV_CMD_WORD		2
+#define DMA_DESC_DEV_CMD_2WORDS		3
+#define DMA_DESC_DEV_CMD_4WORDS		4
+#define DMA_DESC_DEV_CMD_6WORDS		5
+#define DMA_DESC_DEV_CMD_8WORDS		6
+#define DMA_DESC_DEV_CMD_16WORDS	7
+
+/* DMA descriptors interrupts */
+#define DMA_DESC_COF			(1 << 25) /* Chain on finished */
+#define DMA_DESC_COD			(1 << 26) /* Chain on done */
+#define DMA_DESC_IOF			(1 << 27) /* Interrupt on finished */
+#define DMA_DESC_IOD			(1 << 28) /* Interrupt on done */
+#define DMA_DESC_TERM			(1 << 29) /* Terminated */
+#define DMA_DESC_DONE			(1 << 30) /* Done */
+#define DMA_DESC_FINI			(1 << 31) /* Finished */
+
+/*
+ * DMA register (within Internal Register Map).
+ */
+
+struct dma_reg {
+	u32 dmac;		/* Control. */
+	u32 dmas;		/* Status. */
+	u32 dmasm;		/* Mask. */
+	u32 dmadptr;		/* Descriptor pointer. */
+	u32 dmandptr;		/* Next descriptor pointer. */
+};
+
+/* DMA channels specific registers */
+#define DMA_CHAN_RUN_BIT		(1 << 0)
+#define DMA_CHAN_DONE_BIT		(1 << 1)
+#define DMA_CHAN_MODE_BIT		(1 << 2)
+#define DMA_CHAN_MODE_MSK		0x0000000c
+#define  DMA_CHAN_MODE_AUTO		0
+#define  DMA_CHAN_MODE_BURST		1
+#define  DMA_CHAN_MODE_XFRT		2
+#define  DMA_CHAN_MODE_RSVD		3
+#define DMA_CHAN_ACT_BIT		(1 << 4)
+
+/* DMA status registers */
+#define DMA_STAT_FINI			(1 << 0)
+#define DMA_STAT_DONE			(1 << 1)
+#define DMA_STAT_CHAIN			(1 << 2)
+#define DMA_STAT_ERR			(1 << 3)
+#define DMA_STAT_HALT			(1 << 4)
+
+/*
+ * DMA channel definitions
+ */
+
+#define DMA_CHAN_ETH_RCV		0
+#define DMA_CHAN_ETH_XMT		1
+#define DMA_CHAN_MEM_TO_FIFO		2
+#define DMA_CHAN_FIFO_TO_MEM		3
+#define DMA_CHAN_PCI_TO_MEM		4
+#define DMA_CHAN_MEM_TO_PCI		5
+#define DMA_CHAN_COUNT			6
+
+struct dma_channel {
+	struct dma_reg ch[DMA_CHAN_COUNT];
+};
+
+#endif  /* __ASM_RC32434_DMA_H */
diff --git a/arch/mips/include/asm/mach-rc32434/dma_v.h b/arch/mips/include/asm/mach-rc32434/dma_v.h
new file mode 100644
index 0000000..173a9f9
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/dma_v.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ *		All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date   : 20011005
+ */
+
+#ifndef _ASM_RC32434_DMA_V_H_
+#define _ASM_RC32434_DMA_V_H_
+
+#include  <asm/mach-rc32434/dma.h>
+#include  <asm/mach-rc32434/rc32434.h>
+
+#define DMA_CHAN_OFFSET		0x14
+#define IS_DMA_USED(X)		(((X) & \
+				(DMA_DESC_FINI | DMA_DESC_DONE | DMA_DESC_TERM)) \
+				!= 0)
+#define DMA_COUNT(count)	((count) & DMA_DESC_COUNT_MSK)
+
+#define DMA_HALT_TIMEOUT	500
+
+static inline int rc32434_halt_dma(struct dma_reg *ch)
+{
+	int timeout = 1;
+	if (__raw_readl(&ch->dmac) & DMA_CHAN_RUN_BIT) {
+		__raw_writel(0, &ch->dmac);
+		for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) {
+			if (__raw_readl(&ch->dmas) & DMA_STAT_HALT) {
+				__raw_writel(0, &ch->dmas);
+				break;
+			}
+		}
+	}
+
+	return timeout ? 0 : 1;
+}
+
+static inline void rc32434_start_dma(struct dma_reg *ch, u32 dma_addr)
+{
+	__raw_writel(0, &ch->dmandptr);
+	__raw_writel(dma_addr, &ch->dmadptr);
+}
+
+static inline void rc32434_chain_dma(struct dma_reg *ch, u32 dma_addr)
+{
+	__raw_writel(dma_addr, &ch->dmandptr);
+}
+
+#endif  /* _ASM_RC32434_DMA_V_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/eth.h b/arch/mips/include/asm/mach-rc32434/eth.h
new file mode 100644
index 0000000..a25cbc5
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/eth.h
@@ -0,0 +1,220 @@
+/*
+ *  Definitions for the Ethernet registers
+ *
+ *  Copyright 2002 Allend Stichter <allen.stichter@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef	__ASM_RC32434_ETH_H
+#define	__ASM_RC32434_ETH_H
+
+
+#define ETH0_BASE_ADDR		0x18060000
+
+struct eth_regs {
+	u32 ethintfc;
+	u32 ethfifott;
+	u32 etharc;
+	u32 ethhash0;
+	u32 ethhash1;
+	u32 ethu0[4];		/* Reserved. */
+	u32 ethpfs;
+	u32 ethmcp;
+	u32 eth_u1[10];		/* Reserved. */
+	u32 ethspare;
+	u32 eth_u2[42];		/* Reserved. */
+	u32 ethsal0;
+	u32 ethsah0;
+	u32 ethsal1;
+	u32 ethsah1;
+	u32 ethsal2;
+	u32 ethsah2;
+	u32 ethsal3;
+	u32 ethsah3;
+	u32 ethrbc;
+	u32 ethrpc;
+	u32 ethrupc;
+	u32 ethrfc;
+	u32 ethtbc;
+	u32 ethgpf;
+	u32 eth_u9[50];		/* Reserved. */
+	u32 ethmac1;
+	u32 ethmac2;
+	u32 ethipgt;
+	u32 ethipgr;
+	u32 ethclrt;
+	u32 ethmaxf;
+	u32 eth_u10;		/* Reserved. */
+	u32 ethmtest;
+	u32 miimcfg;
+	u32 miimcmd;
+	u32 miimaddr;
+	u32 miimwtd;
+	u32 miimrdd;
+	u32 miimind;
+	u32 eth_u11;		/* Reserved. */
+	u32 eth_u12;		/* Reserved. */
+	u32 ethcfsa0;
+	u32 ethcfsa1;
+	u32 ethcfsa2;
+};
+
+/* Ethernet interrupt registers */
+#define ETH_INT_FC_EN		(1 << 0)
+#define ETH_INT_FC_ITS		(1 << 1)
+#define ETH_INT_FC_RIP		(1 << 2)
+#define ETH_INT_FC_JAM		(1 << 3)
+#define ETH_INT_FC_OVR		(1 << 4)
+#define ETH_INT_FC_UND		(1 << 5)
+#define ETH_INT_FC_IOC		0x000000c0
+
+/* Ethernet FIFO registers */
+#define ETH_FIFI_TT_TTH_BIT	0
+#define ETH_FIFO_TT_TTH		0x0000007f
+
+/* Ethernet ARC/multicast registers */
+#define ETH_ARC_PRO		(1 << 0)
+#define ETH_ARC_AM		(1 << 1)
+#define ETH_ARC_AFM		(1 << 2)
+#define ETH_ARC_AB		(1 << 3)
+
+/* Ethernet SAL registers */
+#define ETH_SAL_BYTE_5		0x000000ff
+#define ETH_SAL_BYTE_4		0x0000ff00
+#define ETH_SAL_BYTE_3		0x00ff0000
+#define ETH_SAL_BYTE_2		0xff000000
+
+/* Ethernet SAH registers */
+#define ETH_SAH_BYTE1		0x000000ff
+#define ETH_SAH_BYTE0		0x0000ff00
+
+/* Ethernet GPF register */
+#define ETH_GPF_PTV		0x0000ffff
+
+/* Ethernet PFG register */
+#define ETH_PFS_PFD		(1 << 0)
+
+/* Ethernet CFSA[0-3] registers */
+#define ETH_CFSA0_CFSA4		0x000000ff
+#define ETH_CFSA0_CFSA5		0x0000ff00
+#define ETH_CFSA1_CFSA2		0x000000ff
+#define ETH_CFSA1_CFSA3		0x0000ff00
+#define ETH_CFSA1_CFSA0		0x000000ff
+#define ETH_CFSA1_CFSA1		0x0000ff00
+
+/* Ethernet MAC1 registers */
+#define ETH_MAC1_RE		(1 << 0)
+#define ETH_MAC1_PAF		(1 << 1)
+#define ETH_MAC1_RFC		(1 << 2)
+#define ETH_MAC1_TFC		(1 << 3)
+#define ETH_MAC1_LB		(1 << 4)
+#define ETH_MAC1_MR		(1 << 31)
+
+/* Ethernet MAC2 registers */
+#define ETH_MAC2_FD		(1 << 0)
+#define ETH_MAC2_FLC		(1 << 1)
+#define ETH_MAC2_HFE		(1 << 2)
+#define ETH_MAC2_DC		(1 << 3)
+#define ETH_MAC2_CEN		(1 << 4)
+#define ETH_MAC2_PE		(1 << 5)
+#define ETH_MAC2_VPE		(1 << 6)
+#define ETH_MAC2_APE		(1 << 7)
+#define ETH_MAC2_PPE		(1 << 8)
+#define ETH_MAC2_LPE		(1 << 9)
+#define ETH_MAC2_NB		(1 << 12)
+#define ETH_MAC2_BP		(1 << 13)
+#define ETH_MAC2_ED		(1 << 14)
+
+/* Ethernet IPGT register */
+#define ETH_IPGT		0x0000007f
+
+/* Ethernet IPGR registers */
+#define ETH_IPGR_IPGR2		0x0000007f
+#define ETH_IPGR_IPGR1		0x00007f00
+
+/* Ethernet CLRT registers */
+#define ETH_CLRT_MAX_RET	0x0000000f
+#define ETH_CLRT_COL_WIN	0x00003f00
+
+/* Ethernet MAXF register */
+#define ETH_MAXF		0x0000ffff
+
+/* Ethernet test registers */
+#define ETH_TEST_REG		(1 << 2)
+#define ETH_MCP_DIV		0x000000ff
+
+/* MII registers */
+#define ETH_MII_CFG_RSVD	0x0000000c
+#define ETH_MII_CMD_RD		(1 << 0)
+#define ETH_MII_CMD_SCN		(1 << 1)
+#define ETH_MII_REG_ADDR	0x0000001f
+#define ETH_MII_PHY_ADDR	0x00001f00
+#define ETH_MII_WTD_DATA	0x0000ffff
+#define ETH_MII_RDD_DATA	0x0000ffff
+#define ETH_MII_IND_BSY		(1 << 0)
+#define ETH_MII_IND_SCN		(1 << 1)
+#define ETH_MII_IND_NV		(1 << 2)
+
+/*
+ * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors.
+ */
+
+#define ETH_RX_FD		(1 << 0)
+#define ETH_RX_LD		(1 << 1)
+#define ETH_RX_ROK		(1 << 2)
+#define ETH_RX_FM		(1 << 3)
+#define ETH_RX_MP		(1 << 4)
+#define ETH_RX_BP		(1 << 5)
+#define ETH_RX_VLT		(1 << 6)
+#define ETH_RX_CF		(1 << 7)
+#define ETH_RX_OVR		(1 << 8)
+#define ETH_RX_CRC		(1 << 9)
+#define ETH_RX_CV		(1 << 10)
+#define ETH_RX_DB		(1 << 11)
+#define ETH_RX_LE		(1 << 12)
+#define ETH_RX_LOR		(1 << 13)
+#define ETH_RX_CES		(1 << 14)
+#define ETH_RX_LEN_BIT		16
+#define ETH_RX_LEN		0xffff0000
+
+#define ETH_TX_FD		(1 << 0)
+#define ETH_TX_LD		(1 << 1)
+#define ETH_TX_OEN		(1 << 2)
+#define ETH_TX_PEN		(1 << 3)
+#define ETH_TX_CEN		(1 << 4)
+#define ETH_TX_HEN		(1 << 5)
+#define ETH_TX_TOK		(1 << 6)
+#define ETH_TX_MP		(1 << 7)
+#define ETH_TX_BP		(1 << 8)
+#define ETH_TX_UND		(1 << 9)
+#define ETH_TX_OF		(1 << 10)
+#define ETH_TX_ED		(1 << 11)
+#define ETH_TX_EC		(1 << 12)
+#define ETH_TX_LC		(1 << 13)
+#define ETH_TX_TD		(1 << 14)
+#define ETH_TX_CRC		(1 << 15)
+#define ETH_TX_LE		(1 << 16)
+#define ETH_TX_CC		0x001E0000
+
+#endif  /* __ASM_RC32434_ETH_H */
diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h
new file mode 100644
index 0000000..c8e554e
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/gpio.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ *	All rights reserved.
+ *
+ * GPIO register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date   : 20011005
+ * Copyright (C) 2001, 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#ifndef _RC32434_GPIO_H_
+#define _RC32434_GPIO_H_
+
+#include <linux/types.h>
+#include <asm-generic/gpio.h>
+
+#define NR_BUILTIN_GPIO		32
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+#define gpio_to_irq(gpio)	(8 + 4 * 32 + gpio)
+#define irq_to_gpio(irq)	(irq - (8 + 4 * 32))
+
+struct rb532_gpio_reg {
+	u32   gpiofunc;   /* GPIO Function Register
+			   * gpiofunc[x]==0 bit = gpio
+			   * func[x]==1  bit = altfunc
+			   */
+	u32   gpiocfg;	  /* GPIO Configuration Register
+			   * gpiocfg[x]==0 bit = input
+			   * gpiocfg[x]==1 bit = output
+			   */
+	u32   gpiod;	  /* GPIO Data Register
+			   * gpiod[x] read/write gpio pinX status
+			   */
+	u32   gpioilevel; /* GPIO Interrupt Status Register
+			   * interrupt level (see gpioistat)
+			   */
+	u32   gpioistat;  /* Gpio Interrupt Status Register
+			   * istat[x] = (gpiod[x] == level[x])
+			   * cleared in ISR (STICKY bits)
+			   */
+	u32   gpionmien;  /* GPIO Non-maskable Interrupt Enable Register */
+};
+
+/* UART GPIO signals */
+#define RC32434_UART0_SOUT	(1 << 0)
+#define RC32434_UART0_SIN	(1 << 1)
+#define RC32434_UART0_RTS	(1 << 2)
+#define RC32434_UART0_CTS	(1 << 3)
+
+/* M & P bus GPIO signals */
+#define RC32434_MP_BIT_22	(1 << 4)
+#define RC32434_MP_BIT_23	(1 << 5)
+#define RC32434_MP_BIT_24	(1 << 6)
+#define RC32434_MP_BIT_25	(1 << 7)
+
+/* CPU GPIO signals */
+#define RC32434_CPU_GPIO	(1 << 8)
+
+/* Reserved GPIO signals */
+#define RC32434_AF_SPARE_6	(1 << 9)
+#define RC32434_AF_SPARE_4	(1 << 10)
+#define RC32434_AF_SPARE_3	(1 << 11)
+#define RC32434_AF_SPARE_2	(1 << 12)
+
+/* PCI messaging unit */
+#define RC32434_PCI_MSU_GPIO	(1 << 13)
+
+/* NAND GPIO signals */
+#define GPIO_RDY		8
+#define GPIO_WPX	9
+#define GPIO_ALE		10
+#define GPIO_CLE		11
+
+/* Compact Flash GPIO pin */
+#define CF_GPIO_NUM		13
+
+extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val);
+extern unsigned get_434_reg(unsigned reg_offs);
+extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
+extern unsigned char get_latch_u5(void);
+
+#endif /* _RC32434_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/integ.h b/arch/mips/include/asm/mach-rc32434/integ.h
new file mode 100644
index 0000000..fa65bc3
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/integ.h
@@ -0,0 +1,59 @@
+/*
+ *  Definitions for the Watchdog registers
+ *
+ *  Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __RC32434_INTEG_H__
+#define __RC32434_INTEG_H__
+
+#include <asm/mach-rc32434/rb.h>
+
+#define INTEG0_BASE_ADDR	0x18030030
+
+struct integ {
+	u32 errcs;			/* sticky use ERRCS_ */
+	u32 wtcount;			/* Watchdog timer count reg. */
+	u32 wtcompare;			/* Watchdog timer timeout value. */
+	u32 wtc;			/* Watchdog timer control. use WTC_ */
+};
+
+/* Error counters */
+#define RC32434_ERR_WTO		0
+#define RC32434_ERR_WNE		1
+#define RC32434_ERR_UCW		2
+#define RC32434_ERR_UCR		3
+#define RC32434_ERR_UPW		4
+#define RC32434_ERR_UPR		5
+#define RC32434_ERR_UDW		6
+#define RC32434_ERR_UDR		7
+#define RC32434_ERR_SAE		8
+#define RC32434_ERR_WRE		9
+
+/* Watchdog control bits */
+#define RC32434_WTC_EN		0
+#define RC32434_WTC_TO		1
+
+#endif	/* __RC32434_INTEG_H__ */
diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h
new file mode 100644
index 0000000..56738d8
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/irq.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_RC32434_IRQ_H
+#define __ASM_RC32434_IRQ_H
+
+#define NR_IRQS	256
+
+#include <asm/mach-generic/irq.h>
+#include <asm/mach-rc32434/rb.h>
+
+/* Interrupt Controller */
+#define IC_GROUP0_PEND		(REGBASE + 0x38000)
+#define IC_GROUP0_MASK		(REGBASE + 0x38008)
+#define IC_GROUP_OFFSET		0x0C
+
+#define NUM_INTR_GROUPS		5
+
+/* 16550 UARTs */
+#define GROUP0_IRQ_BASE		8	/* GRP2 IRQ numbers start here */
+					/* GRP3 IRQ numbers start here */
+#define GROUP1_IRQ_BASE		(GROUP0_IRQ_BASE + 32)
+					/* GRP4 IRQ numbers start here */
+#define GROUP2_IRQ_BASE		(GROUP1_IRQ_BASE + 32)
+					/* GRP5 IRQ numbers start here */
+#define GROUP3_IRQ_BASE		(GROUP2_IRQ_BASE + 32)
+#define GROUP4_IRQ_BASE		(GROUP3_IRQ_BASE + 32)
+
+#define UART0_IRQ		(GROUP3_IRQ_BASE + 0)
+
+#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
+
+#endif  /* __ASM_RC32434_IRQ_H */
diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h
new file mode 100644
index 0000000..410638f
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/pci.h
@@ -0,0 +1,481 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ * Initial Release
+ */
+
+#ifndef _ASM_RC32434_PCI_H_
+#define _ASM_RC32434_PCI_H_
+
+#define epld_mask ((volatile unsigned char *)0xB900000d)
+
+#define PCI0_BASE_ADDR		0x18080000
+#define PCI_LBA_COUNT		4
+
+struct pci_map {
+	u32 address;		/* Address. */
+	u32 control;		/* Control. */
+	u32 mapping;		/* mapping. */
+};
+
+struct pci_reg {
+	u32 pcic;
+	u32 pcis;
+	u32 pcism;
+	u32 pcicfga;
+	u32 pcicfgd;
+	volatile struct pci_map pcilba[PCI_LBA_COUNT];
+	u32 pcidac;
+	u32 pcidas;
+	u32 pcidasm;
+	u32 pcidad;
+	u32 pcidma8c;
+	u32 pcidma9c;
+	u32 pcitc;
+};
+
+#define PCI_MSU_COUNT		2
+
+struct pci_msu {
+	u32 pciim[PCI_MSU_COUNT];
+	u32 pciom[PCI_MSU_COUNT];
+	u32 pciid;
+	u32 pciiic;
+	u32 pciiim;
+	u32 pciiod;
+	u32 pciioic;
+	u32 pciioim;
+};
+
+/*
+ * PCI Control Register
+ */
+
+#define PCI_CTL_EN		(1 << 0)
+#define PCI_CTL_TNR		(1 << 1)
+#define PCI_CTL_SCE		(1 << 2)
+#define PCI_CTL_IEN		(1 << 3)
+#define PCI_CTL_AAA		(1 << 4)
+#define PCI_CTL_EAP		(1 << 5)
+#define PCI_CTL_PCIM_BIT	6
+#define PCI_CTL_PCIM		0x000001c0
+
+#define PCI_CTL_PCIM_DIS	0
+#define PCI_CTL_PCIM_TNR	1 /* Satellite - target not ready */
+#define PCI_CTL_PCIM_SUS	2 /* Satellite - suspended CPU. */
+#define PCI_CTL_PCIM_EXT	3 /* Host - external arbiter. */
+#define PCI_CTL PCIM_PRIO	4 /* Host - fixed priority arb. */
+#define PCI_CTL_PCIM_RR		5 /* Host - round robin priority. */
+#define PCI_CTL_PCIM_RSVD6	6
+#define PCI_CTL_PCIM_RSVD7	7
+
+#define PCI_CTL_IGM		(1 << 9)
+
+/*
+ * PCI Status Register
+ */
+
+#define PCI_STAT_EED		(1 << 0)
+#define PCI_STAT_WR		(1 << 1)
+#define PCI_STAT_NMI		(1 << 2)
+#define PCI_STAT_II		(1 << 3)
+#define PCI_STAT_CWE		(1 << 4)
+#define PCI_STAT_CRE		(1 << 5)
+#define PCI_STAT_MDPE		(1 << 6)
+#define PCI_STAT_STA		(1 << 7)
+#define PCI_STAT_RTA		(1 << 8)
+#define PCI_STAT_RMA		(1 << 9)
+#define PCI_STAT_SSE		(1 << 10)
+#define PCI_STAT_OSE		(1 << 11)
+#define PCI_STAT_PE		(1 << 12)
+#define PCI_STAT_TAE		(1 << 13)
+#define PCI_STAT_RLE		(1 << 14)
+#define PCI_STAT_BME		(1 << 15)
+#define PCI_STAT_PRD		(1 << 16)
+#define PCI_STAT_RIP		(1 << 17)
+
+/*
+ * PCI Status Mask Register
+ */
+
+#define PCI_STATM_EED		PCI_STAT_EED
+#define PCI_STATM_WR		PCI_STAT_WR
+#define PCI_STATM_NMI		PCI_STAT_NMI
+#define PCI_STATM_II		PCI_STAT_II
+#define PCI_STATM_CWE		PCI_STAT_CWE
+#define PCI_STATM_CRE		PCI_STAT_CRE
+#define PCI_STATM_MDPE		PCI_STAT_MDPE
+#define PCI_STATM_STA		PCI_STAT_STA
+#define PCI_STATM_RTA		PCI_STAT_RTA
+#define PCI_STATM_RMA		PCI_STAT_RMA
+#define PCI_STATM_SSE		PCI_STAT_SSE
+#define PCI_STATM_OSE		PCI_STAT_OSE
+#define PCI_STATM_PE		PCI_STAT_PE
+#define PCI_STATM_TAE		PCI_STAT_TAE
+#define PCI_STATM_RLE		PCI_STAT_RLE
+#define PCI_STATM_BME		PCI_STAT_BME
+#define PCI_STATM_PRD		PCI_STAT_PRD
+#define PCI_STATM_RIP		PCI_STAT_RIP
+
+/*
+ * PCI Configuration Address Register
+ */
+#define PCI_CFGA_REG_BIT	2
+#define PCI_CFGA_REG		0x000000fc
+#define	 PCI_CFGA_REG_ID	(0x00 >> 2)	/* use PCFGID */
+#define	 PCI_CFGA_REG_04	(0x04 >> 2)	/* use PCFG04_ */
+#define	 PCI_CFGA_REG_08	(0x08 >> 2)	/* use PCFG08_ */
+#define	 PCI_CFGA_REG_0C	(0x0C >> 2)	/* use PCFG0C_ */
+#define	 PCI_CFGA_REG_PBA0	(0x10 >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_PBA1	(0x14 >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_PBA2	(0x18 >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_PBA3	(0x1c >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_SUBSYS	(0x2c >> 2)	/* use PCFGSS_ */
+#define  PCI_CFGA_REG_3C	(0x3C >> 2)	/* use PCFG3C_ */
+#define	 PCI_CFGA_REG_PBBA0C	(0x44 >> 2)	/* use PCIPBAC_ */
+#define  PCI_CFGA_REG_PBA0M	(0x48 >> 2)
+#define	 PCI_CFGA_REG_PBA1C	(0x4c >> 2)	/* use PCIPBAC_ */
+#define  PCI_CFGA_REG_PBA1M	(0x50 >> 2)
+#define	 PCI_CFGA_REG_PBA2C	(0x54 >> 2)	/* use PCIPBAC_ */
+#define	 PCI_CFGA_REG_PBA2M	(0x58 >> 2)
+#define	 PCI_CFGA_REG_PBA3C	(0x5c >> 2)	/* use PCIPBAC_ */
+#define	 PCI_CFGA_REG_PBA3M	(0x60 >> 2)
+#define	 PCI_CFGA_REG_PMGT	(0x64 >> 2)
+#define PCI_CFGA_FUNC_BIT	8
+#define PCI_CFGA_FUNC		0x00000700
+#define PCI_CFGA_DEV_BIT	11
+#define	PCI_CFGA_DEV		0x0000f800
+#define	PCI_CFGA_DEV_INTERN	0
+#define	PCI_CFGA_BUS_BIT	16
+#define PCI CFGA_BUS		0x00ff0000
+#define PCI_CFGA_BUS_TYPE0	0
+#define PCI_CFGA_EN		(1 << 31)
+
+/* PCI CFG04 commands */
+#define PCI_CFG04_CMD_IO_ENA	(1 << 0)
+#define PCI_CFG04_CMD_MEM_ENA	(1 << 1)
+#define PCI_CFG04_CMD_BM_ENA	(1 << 2)
+#define PCI_CFG04_CMD_MW_INV	(1 << 4)
+#define PCI_CFG04_CMD_PAR_ENA	(1 << 6)
+#define PCI_CFG04_CMD_SER_ENA	(1 << 8)
+#define PCI_CFG04_CMD_FAST_ENA	(1 << 9)
+
+/* PCI CFG04 status fields */
+#define PCI_CFG04_STAT_BIT	16
+#define PCI_CFG04_STAT		0xffff0000
+#define PCI_CFG04_STAT_66_MHZ	(1 << 21)
+#define PCI_CFG04_STAT_FBB	(1 << 23)
+#define PCI_CFG04_STAT_MDPE	(1 << 24)
+#define PCI_CFG04_STAT_DST	(1 << 25)
+#define PCI_CFG04_STAT_STA	(1 << 27)
+#define PCI_CFG04_STAT_RTA	(1 << 28)
+#define PCI_CFG04_STAT_RMA	(1 << 29)
+#define PCI_CFG04_STAT_SSE	(1 << 30)
+#define PCI_CFG04_STAT_PE	(1 << 31)
+
+#define PCI_PBA_MSI		(1 << 0)
+#define PCI_PBA_P		(1 << 2)
+
+/* PCI PBAC registers */
+#define PCI_PBAC_MSI		(1 << 0)
+#define PCI_PBAC_P		(1 << 1)
+#define PCI_PBAC_SIZE_BIT	2
+#define PCI_PBAC_SIZE		0x0000007c
+#define	PCI_PBAC_SB		(1 << 7)
+#define	PCI_PBAC_PP		(1 << 8)
+#define PCI_PBAC_MR_BIT		9
+#define PCI_PBAC_MR		0x00000600
+#define	 PCI_PBAC_MR_RD		0
+#define	 PCI_PBAC_MR_RD_LINE	1
+#define  PCI_PBAC_MR_RD_MULT	2
+#define PCI_PBAC_MRL		(1 << 11)
+#define PCI_PBAC_MRM		(1 << 12)
+#define PCI_PBAC_TRP		(1 << 13)
+
+#define PCI_CFG40_TRDY_TIM	0x000000ff
+#define PCI_CFG40_RET_LIM	0x0000ff00
+
+/*
+ * PCI Local Base Address [0|1|2|3] Register
+ */
+
+#define PCI_LBA_BADDR_BIT	0
+#define PCI_LBA_BADDR		0xffffff00
+
+/*
+ * PCI Local Base Address Control Register
+ */
+
+#define PCI_LBAC_MSI		(1 << 0)
+#define  PCI_LBAC_MSI_MEM	0
+#define  PCI_LBAC_MSI_IO	1
+#define PCI_LBAC_SIZE_BIT	2
+#define PCI_LBAC_SIZE		0x0000007c
+#define PCI_LBAC_SB		(1 << 7)
+#define PCI_LBAC_RT		(1 << 8)
+#define  PCI_LBAC_RT_NO_PREF	0
+#define  PCI_LBAC_RT_PREF	1
+
+/*
+ * PCI Local Base Address [0|1|2|3] Mapping Register
+ */
+#define PCI_LBAM_MADDR_BIT	8
+#define PCI_LBAM_MADDR		0xffffff00
+
+/*
+ * PCI Decoupled Access Control Register
+ */
+#define PCI_DAC_DEN		(1 << 0)
+
+/*
+ * PCI Decoupled Access Status Register
+ */
+#define PCI_DAS_D		(1 << 0)
+#define PCI_DAS_B		(1 << 1)
+#define PCI_DAS_E		(1 << 2)
+#define PCI_DAS_OFE		(1 << 3)
+#define PCI_DAS_OFF		(1 << 4)
+#define PCI_DAS_IFE		(1 << 5)
+#define PCI_DAS_IFF		(1 << 6)
+
+/*
+ * PCI DMA Channel 8 Configuration Register
+ */
+#define PCI_DMA8C_MBS_BIT	0
+#define PCI_DMA8C_MBS		0x00000fff /* Maximum Burst Size. */
+#define PCI_DMA8C_OUR		(1 << 12)
+
+/*
+ * PCI DMA Channel 9 Configuration Register
+ */
+#define PCI_DMA9C_MBS_BIT	0	/* Maximum Burst Size. */
+#define PCI_DMA9C_MBS		0x00000fff
+
+/*
+ * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors
+ */
+
+#define PCI_DMAD_PT_BIT		22		/* in DEVCMD field (descriptor) */
+#define PCI_DMAD_PT		0x00c00000	/* preferred transaction field */
+/* These are for reads (DMA channel 8) */
+#define PCI_DMAD_DEVCMD_MR	0		/* memory read */
+#define	PCI_DMAD_DEVCMD_MRL	1		/* memory read line */
+#define	PCI_DMAD_DEVCMD_MRM	2		/* memory read multiple */
+#define	PCI_DMAD_DEVCMD_IOR	3		/* I/O read */
+/* These are for writes (DMA channel 9) */
+#define PCI_DMAD_DEVCMD_MW	0		/* memory write */
+#define	PCI_DMAD_DEVCMD_MWI	1		/* memory write invalidate */
+#define	PCI_DMAD_DEVCMD_IOW	3		/* I/O write */
+
+/* Swap byte field applies to both DMA channel 8 and 9 */
+#define	PCI_DMAD_SB		(1 << 24)	/* swap byte field */
+
+
+/*
+ * PCI Target Control Register
+ */
+
+#define PCI_TC_RTIMER_BIT	0
+#define PCI_TC_RTIMER		0x000000ff
+#define PCI_TC_DTIMER_BIT	8
+#define PCI_TC_DTIMER		0x0000ff00
+#define PCI_TC_RDR		(1 << 18)
+#define PCI_TC_DDT		(1 << 19)
+
+/*
+ * PCI messaging unit [applies to both inbound and outbound registers ]
+ */
+#define PCI_MSU_M0		(1 << 0)
+#define PCI_MSU_M1		(1 << 1)
+#define PCI_MSU_DB		(1 << 2)
+
+#define PCI_MSG_ADDR	     	0xB8088010
+#define PCI0_ADDR		0xB8080000
+#define rc32434_pci ((struct pci_reg *) PCI0_ADDR)
+#define rc32434_pci_msg ((struct pci_msu *) PCI_MSG_ADDR)
+
+#define PCIM_SHFT		0x6
+#define PCIM_BIT_LEN		0x7
+#define PCIM_H_EA		0x3
+#define PCIM_H_IA_FIX		0x4
+#define PCIM_H_IA_RR		0x5
+#if 0
+#define PCI_ADDR_START		0x13000000
+#endif
+
+#define PCI_ADDR_START		0x50000000
+
+#define CPUTOPCI_MEM_WIN	0x02000000
+#define CPUTOPCI_IO_WIN		0x00100000
+#define PCILBA_SIZE_SHFT	2
+#define PCILBA_SIZE_MASK	0x1F
+#define SIZE_256MB		0x1C
+#define SIZE_128MB		0x1B
+#define SIZE_64MB               0x1A
+#define SIZE_32MB		0x19
+#define SIZE_16MB               0x18
+#define SIZE_4MB		0x16
+#define SIZE_2MB		0x15
+#define SIZE_1MB		0x14
+#define KORINA_CONFIG0_ADDR	0x80000000
+#define KORINA_CONFIG1_ADDR	0x80000004
+#define KORINA_CONFIG2_ADDR	0x80000008
+#define KORINA_CONFIG3_ADDR	0x8000000C
+#define KORINA_CONFIG4_ADDR	0x80000010
+#define KORINA_CONFIG5_ADDR	0x80000014
+#define KORINA_CONFIG6_ADDR	0x80000018
+#define KORINA_CONFIG7_ADDR	0x8000001C
+#define KORINA_CONFIG8_ADDR	0x80000020
+#define KORINA_CONFIG9_ADDR	0x80000024
+#define KORINA_CONFIG10_ADDR	0x80000028
+#define KORINA_CONFIG11_ADDR	0x8000002C
+#define KORINA_CONFIG12_ADDR	0x80000030
+#define KORINA_CONFIG13_ADDR	0x80000034
+#define KORINA_CONFIG14_ADDR	0x80000038
+#define KORINA_CONFIG15_ADDR	0x8000003C
+#define KORINA_CONFIG16_ADDR	0x80000040
+#define KORINA_CONFIG17_ADDR	0x80000044
+#define KORINA_CONFIG18_ADDR	0x80000048
+#define KORINA_CONFIG19_ADDR	0x8000004C
+#define KORINA_CONFIG20_ADDR	0x80000050
+#define KORINA_CONFIG21_ADDR	0x80000054
+#define KORINA_CONFIG22_ADDR	0x80000058
+#define KORINA_CONFIG23_ADDR	0x8000005C
+#define KORINA_CONFIG24_ADDR	0x80000060
+#define KORINA_CONFIG25_ADDR	0x80000064
+#define KORINA_CMD 		(PCI_CFG04_CMD_IO_ENA | \
+				 PCI_CFG04_CMD_MEM_ENA | \
+				 PCI_CFG04_CMD_BM_ENA | \
+				 PCI_CFG04_CMD_MW_INV | \
+				 PCI_CFG04_CMD_PAR_ENA | \
+				 PCI_CFG04_CMD_SER_ENA)
+
+#define KORINA_STAT		(PCI_CFG04_STAT_MDPE | \
+				 PCI_CFG04_STAT_STA | \
+				 PCI_CFG04_STAT_RTA | \
+				 PCI_CFG04_STAT_RMA | \
+				 PCI_CFG04_STAT_SSE | \
+				 PCI_CFG04_STAT_PE)
+
+#define KORINA_CNFG1		((KORINA_STAT<<16)|KORINA_CMD)
+
+#define KORINA_REVID		0
+#define KORINA_CLASS_CODE	0
+#define KORINA_CNFG2		((KORINA_CLASS_CODE<<8) | \
+				  KORINA_REVID)
+
+#define KORINA_CACHE_LINE_SIZE	4
+#define KORINA_MASTER_LAT	0x3c
+#define KORINA_HEADER_TYPE	0
+#define KORINA_BIST		0
+
+#define KORINA_CNFG3 ((KORINA_BIST << 24) | \
+		      (KORINA_HEADER_TYPE<<16) | \
+		      (KORINA_MASTER_LAT<<8) | \
+		      KORINA_CACHE_LINE_SIZE)
+
+#define KORINA_BAR0	0x00000008	/* 128 MB Memory */
+#define KORINA_BAR1	0x18800001	/* 1 MB IO */
+#define KORINA_BAR2	0x18000001	/* 2 MB IO window for Korina
+					   internal Registers */
+#define KORINA_BAR3	0x48000008	/* Spare 128 MB Memory */
+
+#define KORINA_CNFG4	KORINA_BAR0
+#define KORINA_CNFG5    KORINA_BAR1
+#define KORINA_CNFG6 	KORINA_BAR2
+#define KORINA_CNFG7	KORINA_BAR3
+
+#define KORINA_SUBSYS_VENDOR_ID 0x011d
+#define KORINA_SUBSYSTEM_ID	0x0214
+#define KORINA_CNFG8		0
+#define KORINA_CNFG9		0
+#define KORINA_CNFG10		0
+#define KORINA_CNFG11 	((KORINA_SUBSYS_VENDOR_ID<<16) | \
+			  KORINA_SUBSYSTEM_ID)
+#define KORINA_INT_LINE		1
+#define KORINA_INT_PIN		1
+#define KORINA_MIN_GNT		8
+#define KORINA_MAX_LAT		0x38
+#define KORINA_CNFG12		0
+#define KORINA_CNFG13 		0
+#define KORINA_CNFG14		0
+#define KORINA_CNFG15	((KORINA_MAX_LAT<<24) | \
+			 (KORINA_MIN_GNT<<16) | \
+			 (KORINA_INT_PIN<<8)  | \
+			  KORINA_INT_LINE)
+#define	KORINA_RETRY_LIMIT	0x80
+#define KORINA_TRDY_LIMIT	0x80
+#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \
+			KORINA_TRDY_LIMIT)
+#define PCI_PBAxC_R		0x0
+#define PCI_PBAxC_RL		0x1
+#define PCI_PBAxC_RM		0x2
+#define SIZE_SHFT		2
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA0C	(PCI_PBAC_MRL | PCI_PBAC_SB | \
+			  ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \
+			  PCI_PBAC_PP | \
+			  (SIZE_128MB<<SIZE_SHFT) | \
+			   PCI_PBAC_P)
+#else
+#define KORINA_PBA0C	(PCI_PBAC_MRL | \
+			  ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \
+			  PCI_PBAC_PP | \
+			  (SIZE_128MB<<SIZE_SHFT) | \
+			   PCI_PBAC_P)
+#endif
+#define KORINA_CNFG17	KORINA_PBA0C
+#define KORINA_PBA0M	0x0
+#define KORINA_CNFG18	KORINA_PBA0M
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA1C	((SIZE_1MB<<SIZE_SHFT) | PCI_PBAC_SB | \
+			  PCI_PBAC_MSI)
+#else
+#define KORINA_PBA1C	((SIZE_1MB<<SIZE_SHFT) | \
+			  PCI_PBAC_MSI)
+#endif
+#define KORINA_CNFG19	KORINA_PBA1C
+#define KORINA_PBA1M	0x0
+#define KORINA_CNFG20	KORINA_PBA1M
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA2C	((SIZE_2MB<<SIZE_SHFT) | PCI_PBAC_SB | \
+			  PCI_PBAC_MSI)
+#else
+#define KORINA_PBA2C	((SIZE_2MB<<SIZE_SHFT) | \
+			  PCI_PBAC_MSI)
+#endif
+#define KORINA_CNFG21	KORINA_PBA2C
+#define KORINA_PBA2M	0x18000000
+#define KORINA_CNFG22	KORINA_PBA2M
+#define KORINA_PBA3C	0
+#define KORINA_CNFG23	KORINA_PBA3C
+#define KORINA_PBA3M	0
+#define KORINA_CNFG24	KORINA_PBA3M
+
+#define	PCITC_DTIMER_VAL	8
+#define PCITC_RTIMER_VAL	0x10
+
+#endif  /* __ASM_RC32434_PCI_H */
diff --git a/arch/mips/include/asm/mach-rc32434/prom.h b/arch/mips/include/asm/mach-rc32434/prom.h
new file mode 100644
index 0000000..660707f
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/prom.h
@@ -0,0 +1,40 @@
+/*
+ *  Definitions for the PROM
+ *
+ *  Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#define PROM_ENTRY(x)		(0xbfc00000 + ((x) * 8))
+
+#define SR_NMI			0x00180000
+#define SERIAL_SPEED_ENTRY	0x00000001
+
+#define FREQ_TAG		"HZ="
+#define KMAC_TAG		"kmac="
+#define MEM_TAG			"mem="
+#define BOARD_TAG		"board="
+
+#define BOARD_RB532		"500"
+#define BOARD_RB532A		"500r5"
diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h
new file mode 100644
index 0000000..79e8ef6
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/rb.h
@@ -0,0 +1,84 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  Copyright (C) 2004 IDT Inc.
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+#ifndef __ASM_RC32434_RB_H
+#define __ASM_RC32434_RB_H
+
+#include <linux/genhd.h>
+
+#define REGBASE		0x18000000
+#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(REGBASE))
+#define UART0BASE	0x58000
+#define RST		(1 << 15)
+#define DEV0BASE	0x010000
+#define DEV0MASK	0x010004
+#define DEV0C		0x010008
+#define DEV0T		0x01000C
+#define DEV1BASE	0x010010
+#define DEV1MASK	0x010014
+#define DEV1C		0x010018
+#define DEV1TC		0x01001C
+#define DEV2BASE	0x010020
+#define DEV2MASK	0x010024
+#define DEV2C		0x010028
+#define DEV2TC		0x01002C
+#define DEV3BASE	0x010030
+#define DEV3MASK	0x010034
+#define DEV3C		0x010038
+#define DEV3TC		0x01003C
+#define BTCS		0x010040
+#define BTCOMPARE	0x010044
+#define GPIOBASE	0x050000
+#define GPIOCFG		0x050004
+#define GPIOD		0x050008
+#define GPIOILEVEL	0x05000C
+#define GPIOISTAT	0x050010
+#define GPIONMIEN	0x050014
+#define IMASK6		0x038038
+#define LO_WPX		(1 << 0)
+#define LO_ALE		(1 << 1)
+#define LO_CLE		(1 << 2)
+#define LO_CEX		(1 << 3)
+#define LO_FOFF		(1 << 5)
+#define LO_SPICS	(1 << 6)
+#define LO_ULED		(1 << 7)
+
+#define BIT_TO_MASK(x)	(1 << x)
+
+struct dev_reg {
+	u32	base;
+	u32	mask;
+	u32	ctl;
+	u32	timing;
+};
+
+struct korina_device {
+	char *name;
+	unsigned char mac[6];
+	struct net_device *dev;
+};
+
+struct cf_device {
+	int gpio_pin;
+	void *dev;
+	struct gendisk *gd;
+};
+
+struct mpmc_device {
+	unsigned char	state;
+	spinlock_t	lock;
+	void __iomem 	*base;
+};
+
+#endif  /* __ASM_RC32434_RB_H */
diff --git a/arch/mips/include/asm/mach-rc32434/rc32434.h b/arch/mips/include/asm/mach-rc32434/rc32434.h
new file mode 100644
index 0000000..fce25d4
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/rc32434.h
@@ -0,0 +1,19 @@
+/*
+ * Definitions for IDT RC323434 CPU.
+ */
+
+#ifndef _ASM_RC32434_RC32434_H_
+#define _ASM_RC32434_RC32434_H_
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#define IDT_CLOCK_MULT		2
+
+/* cpu pipeline flush */
+static inline void rc32434_sync(void)
+{
+	__asm__ volatile ("sync");
+}
+
+#endif  /* _ASM_RC32434_RC32434_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/timer.h b/arch/mips/include/asm/mach-rc32434/timer.h
new file mode 100644
index 0000000..e49b1d5
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/timer.h
@@ -0,0 +1,65 @@
+/*
+ *  Definitions for timer registers
+ *
+ *  Copyright 2004 Philip Rischel <rischelp@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_RC32434_TIMER_H
+#define __ASM_RC32434_TIMER_H
+
+#include <asm/mach-rc32434/rb.h>
+
+#define TIMER0_BASE_ADDR		0x18028000
+#define TIMER_COUNT			3
+
+struct timer_counter {
+	u32 count;
+	u32 compare;
+	u32 ctc;		/*use CTC_ */
+};
+
+struct timer {
+	struct timer_counter tim[TIMER_COUNT];
+	u32 rcount;	/* use RCOUNT_ */
+	u32 rcompare;	/* use RCOMPARE_ */
+	u32 rtc;	/* use RTC_ */
+};
+
+#define RC32434_CTC_EN_BIT		0
+#define RC32434_CTC_TO_BIT		1
+
+/* Real time clock registers */
+#define RC32434_RTC_MSK(x)              BIT_TO_MASK(x)
+#define RC32434_RTC_CE_BIT              0
+#define RC32434_RTC_TO_BIT              1
+#define RC32434_RTC_RQE_BIT             2
+
+/* Counter registers */
+#define RC32434_RCOUNT_BIT              0
+#define RC32434_RCOUNT_MSK              0x0000ffff
+#define RC32434_RCOMP_BIT               0
+#define RC32434_RCOMP_MSK               0x0000ffff
+
+#endif  /* __ASM_RC32434_TIMER_H */
diff --git a/arch/mips/include/asm/mach-rc32434/war.h b/arch/mips/include/asm/mach-rc32434/war.h
new file mode 100644
index 0000000..3ddf187
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
+#define __ASM_MIPS_MACH_MIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	1
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h
new file mode 100644
index 0000000..ccf5433
--- /dev/null
+++ b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h
@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * SNI RM200 C apparently was only shipped with R4600 V2.0 and R5000 processors.
+ */
+#ifndef __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H
+
+#include <cpu-feature-overrides.h>
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+#define cpu_has_fpu		1
+#define cpu_has_32fpr		1
+#define cpu_has_counter		1
+#define cpu_has_watch		0
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_cache_cdex_p	1
+#define cpu_has_prefetch	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	(PAGE_SIZE < 0x4000)
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-rm/mc146818rtc.h b/arch/mips/include/asm/mach-rm/mc146818rtc.h
new file mode 100644
index 0000000..145bce0
--- /dev/null
+++ b/arch/mips/include/asm/mach-rm/mc146818rtc.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip with ARC epoch.
+ */
+#ifndef __ASM_MACH_RM_MC146818RTC_H
+#define __ASM_MACH_RM_MC146818RTC_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
+#else
+#define mc146818_decode_year(year) ((year) + 1980)
+#endif
+
+#include_next <mc146818rtc.h>
+
+#endif /* __ASM_MACH_RM_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-rm/war.h b/arch/mips/include/asm/mach-rm/war.h
new file mode 100644
index 0000000..948d312
--- /dev/null
+++ b/arch/mips/include/asm/mach-rm/war.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_RM_WAR_H
+#define __ASM_MIPS_MACH_RM_WAR_H
+
+/*
+ * The RM200C seems to have been shipped only with V2.0 R4600s
+ */
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	1
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_RM_WAR_H */
diff --git a/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h
new file mode 100644
index 0000000..1c1f924
--- /dev/null
+++ b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Sibyte are MIPS64 processors wired to a specific configuration
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		1
+#define cpu_has_ejtag		1
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	1
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	1
+#define cpu_has_mips64r2	0
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+#endif /* __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h
new file mode 100644
index 0000000..7950ef4
--- /dev/null
+++ b/arch/mips/include/asm/mach-sibyte/war.h
@@ -0,0 +1,37 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_SIBYTE_WAR_H
+#define __ASM_MIPS_MACH_SIBYTE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+
+#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \
+    defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
+
+#define BCM1250_M3_WAR	1
+#define SIBYTE_1956_WAR	1
+
+#else
+
+#define BCM1250_M3_WAR	0
+#define SIBYTE_1956_WAR	0
+
+#endif
+
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_SIBYTE_WAR_H */
diff --git a/arch/mips/include/asm/mach-tx39xx/ioremap.h b/arch/mips/include/asm/mach-tx39xx/ioremap.h
new file mode 100644
index 0000000..93c6c04
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx39xx/ioremap.h
@@ -0,0 +1,38 @@
+/*
+ *	include/asm-mips/mach-tx39xx/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_TX39XX_IOREMAP_H
+#define __ASM_MACH_TX39XX_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+#define TXX9_DIRECTMAP_BASE	0xff000000ul
+	if (offset >= TXX9_DIRECTMAP_BASE &&
+	    offset < TXX9_DIRECTMAP_BASE + 0xff0000)
+		return (void __iomem *)offset;
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= TXX9_DIRECTMAP_BASE;
+}
+
+#endif /* __ASM_MACH_TX39XX_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-tx39xx/mangle-port.h b/arch/mips/include/asm/mach-tx39xx/mangle-port.h
new file mode 100644
index 0000000..ef0b502
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx39xx/mangle-port.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_TX39XX_MANGLE_PORT_H
+#define __ASM_MACH_TX39XX_MANGLE_PORT_H
+
+#if defined(CONFIG_TOSHIBA_JMR3927)
+extern unsigned long (*__swizzle_addr_b)(unsigned long port);
+#define NEEDS_TXX9_SWIZZLE_ADDR_B
+#else
+#define __swizzle_addr_b(port)	(port)
+#endif
+#define __swizzle_addr_w(port)	(port)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+#define ioswabb(a, x)		(x)
+#define __mem_ioswabb(a, x)	(x)
+#define ioswabw(a, x)		le16_to_cpu(x)
+#define __mem_ioswabw(a, x)	(x)
+#define ioswabl(a, x)		le32_to_cpu(x)
+#define __mem_ioswabl(a, x)	(x)
+#define ioswabq(a, x)		le64_to_cpu(x)
+#define __mem_ioswabq(a, x)	(x)
+
+#endif /* __ASM_MACH_TX39XX_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-tx39xx/war.h b/arch/mips/include/asm/mach-tx39xx/war.h
new file mode 100644
index 0000000..4338146
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx39xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_TX39XX_WAR_H
+#define __ASM_MIPS_MACH_TX39XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_TX39XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h
new file mode 100644
index 0000000..275eaf9
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_llsc	1
+#define cpu_has_64bits	1
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_has_mips16		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+#define cpu_has_vtag_icache	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp	0
+#define cpu_has_mipsmt	0
+#define cpu_has_userlocal	0
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/ioremap.h b/arch/mips/include/asm/mach-tx49xx/ioremap.h
new file mode 100644
index 0000000..1e7beae
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/ioremap.h
@@ -0,0 +1,43 @@
+/*
+ *	include/asm-mips/mach-tx49xx/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_TX49XX_IOREMAP_H
+#define __ASM_MACH_TX49XX_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+#ifdef CONFIG_64BIT
+#define TXX9_DIRECTMAP_BASE	0xfff000000ul
+#else
+#define TXX9_DIRECTMAP_BASE	0xff000000ul
+#endif
+	if (offset >= TXX9_DIRECTMAP_BASE &&
+	    offset < TXX9_DIRECTMAP_BASE + 0x400000)
+		return (void __iomem *)(unsigned long)(int)offset;
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >=
+		(unsigned long)(int)(TXX9_DIRECTMAP_BASE & 0xffffffff);
+}
+
+#endif /* __ASM_MACH_TX49XX_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/kmalloc.h b/arch/mips/include/asm/mach-tx49xx/kmalloc.h
new file mode 100644
index 0000000..913ff19
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/kmalloc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_TX49XX_KMALLOC_H
+#define __ASM_MACH_TX49XX_KMALLOC_H
+
+/*
+ * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ */
+
+#endif /* __ASM_MACH_TX49XX_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/war.h b/arch/mips/include/asm/mach-tx49xx/war.h
new file mode 100644
index 0000000..39b5d11
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_TX49XX_WAR_H
+#define __ASM_MIPS_MACH_TX49XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	1
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_TX49XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-vr41xx/irq.h b/arch/mips/include/asm/mach-vr41xx/irq.h
new file mode 100644
index 0000000..862058d
--- /dev/null
+++ b/arch/mips/include/asm/mach-vr41xx/irq.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_VR41XX_IRQ_H
+#define __ASM_MACH_VR41XX_IRQ_H
+
+#include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_VR41XX_IRQ_H */
diff --git a/arch/mips/include/asm/mach-vr41xx/war.h b/arch/mips/include/asm/mach-vr41xx/war.h
new file mode 100644
index 0000000..56a3892
--- /dev/null
+++ b/arch/mips/include/asm/mach-vr41xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_VR41XX_WAR_H
+#define __ASM_MIPS_MACH_VR41XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_VR41XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
new file mode 100644
index 0000000..83746b8
--- /dev/null
+++ b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
@@ -0,0 +1,83 @@
+/*
+ * This is a direct copy of the ev96100.h file, with a global
+ * search and replace.  The numbers are the same.
+ *
+ * The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef __ASM_MIPS_GT64120_H
+#define __ASM_MIPS_GT64120_H
+
+/*
+ * This is the CPU physical memory map of PPMC Board:
+ *
+ *    0x00000000-0x03FFFFFF      - 64MB SDRAM (SCS[0]#)
+ *    0x1C000000-0x1C000000      - LED (CS0)
+ *    0x1C800000-0x1C800007      - UART 16550 port (CS1)
+ *    0x1F000000-0x1F000000      - MailBox (CS3)
+ *    0x1FC00000-0x20000000      - 4MB Flash (BOOT CS)
+ */
+
+#define WRPPMC_SDRAM_SCS0_BASE	0x00000000
+#define WRPPMC_SDRAM_SCS0_SIZE	0x04000000
+
+#define WRPPMC_UART16550_BASE	0x1C800000
+#define WRPPMC_UART16550_CLOCK	3686400 /* 3.68MHZ */
+
+#define WRPPMC_LED_BASE		0x1C000000
+#define WRPPMC_MBOX_BASE	0x1F000000
+
+#define WRPPMC_BOOTROM_BASE	0x1FC00000
+#define WRPPMC_BOOTROM_SIZE	0x00400000 /* 4M Flash */
+
+#define WRPPMC_MIPS_TIMER_IRQ	7 /* MIPS compare/count timer interrupt */
+#define WRPPMC_UART16550_IRQ	6
+#define WRPPMC_PCI_INTA_IRQ	3
+
+/*
+ * PCI Bus I/O and Memory resources allocation
+ *
+ * NOTE: We only have PCI_0 hose interface
+ */
+#define GT_PCI_MEM_BASE	0x13000000UL
+#define GT_PCI_MEM_SIZE	0x02000000UL
+#define GT_PCI_IO_BASE	0x11000000UL
+#define GT_PCI_IO_SIZE	0x02000000UL
+
+/*
+ * PCI interrupts will come in on either the INTA or INTD interrupt lines,
+ * which are mapped to the #2 and #5 interrupt pins of the MIPS.  On our
+ * boards, they all either come in on IntD or they all come in on IntA, they
+ * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
+ * "requested" interrupt numbers and go through the list whenever we get an
+ * IntA/D.
+ *
+ * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
+ * INTD is 11.
+ */
+#define GT_TIMER	4
+#define GT_INTA		2
+#define GT_INTD		5
+
+#ifndef __ASSEMBLY__
+
+/*
+ * GT64120 internal register space base address
+ */
+extern unsigned long gt64120_base;
+
+#define GT64120_BASE	(gt64120_base)
+
+/* define WRPPMC_EARLY_DEBUG to enable early output something to UART */
+#undef WRPPMC_EARLY_DEBUG
+
+#ifdef WRPPMC_EARLY_DEBUG
+extern void wrppmc_led_on(int mask);
+extern void wrppmc_led_off(int mask);
+extern void wrppmc_early_printk(const char *fmt, ...);
+#else
+#define wrppmc_early_printk(fmt, ...) do {} while (0)
+#endif /* WRPPMC_EARLY_DEBUG */
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_MIPS_GT64120_H */
diff --git a/arch/mips/include/asm/mach-wrppmc/war.h b/arch/mips/include/asm/mach-wrppmc/war.h
new file mode 100644
index 0000000..ac48629
--- /dev/null
+++ b/arch/mips/include/asm/mach-wrppmc/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_WRPPMC_WAR_H
+#define __ASM_MIPS_MACH_WRPPMC_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_WRPPMC_WAR_H */
diff --git a/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h
new file mode 100644
index 0000000..470e5e9
--- /dev/null
+++ b/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Momentum Jaguar ATX always has the RM9000 processor.
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-yosemite/war.h b/arch/mips/include/asm/mach-yosemite/war.h
new file mode 100644
index 0000000..e5c6d53
--- /dev/null
+++ b/arch/mips/include/asm/mach-yosemite/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_YOSEMITE_WAR_H
+#define __ASM_MIPS_MACH_YOSEMITE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		1
+#define ICACHE_REFILLS_WORKAROUND_WAR	1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_YOSEMITE_WAR_H */
diff --git a/arch/mips/include/asm/mc146818-time.h b/arch/mips/include/asm/mc146818-time.h
new file mode 100644
index 0000000..199b457
--- /dev/null
+++ b/arch/mips/include/asm/mc146818-time.h
@@ -0,0 +1,119 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_MC146818_TIME_H
+#define __ASM_MC146818_TIME_H
+
+#include <linux/bcd.h>
+#include <linux/mc146818rtc.h>
+#include <linux/time.h>
+
+/*
+ * For check timing call set_rtc_mmss() 500ms; used in timer interrupt.
+ */
+#define USEC_AFTER	500000
+#define USEC_BEFORE	500000
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ *      sets the minutes. Usually you'll only notice that after reboot!
+ */
+static inline int mc146818_set_rtc_mmss(unsigned long nowtime)
+{
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned char save_control, save_freq_select;
+	int retval = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		cmos_minutes = bcd2bin(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
+		}
+		CMOS_WRITE(real_seconds, RTC_SECONDS);
+		CMOS_WRITE(real_minutes, RTC_MINUTES);
+	} else {
+		printk(KERN_WARNING
+		       "set_rtc_mmss: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	/* The following flags have to be released exactly in this order,
+	 * otherwise the DS12887 (popular MC146818A clone with integrated
+	 * battery and quartz) will not reset the oscillator and will not
+	 * update precisely 500 ms later. You won't find this mentioned in
+	 * the Dallas Semiconductor data sheets, but who believes data
+	 * sheets anyway ...                           -- Markus Kuhn
+	 */
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	return retval;
+}
+
+static inline unsigned long mc146818_get_cmos_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+
+	do {
+		sec = CMOS_READ(RTC_SECONDS);
+		min = CMOS_READ(RTC_MINUTES);
+		hour = CMOS_READ(RTC_HOURS);
+		day = CMOS_READ(RTC_DAY_OF_MONTH);
+		mon = CMOS_READ(RTC_MONTH);
+		year = CMOS_READ(RTC_YEAR);
+	} while (sec != CMOS_READ(RTC_SECONDS));
+
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
+	}
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	year = mc146818_decode_year(year);
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+#endif /* __ASM_MC146818_TIME_H */
diff --git a/arch/mips/include/asm/mc146818rtc.h b/arch/mips/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..68b4da6
--- /dev/null
+++ b/arch/mips/include/asm/mc146818rtc.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2000 Ralf Baechle
+ * Copyright (C) 2002  Maciej W. Rozycki
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <mc146818rtc.h>
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
new file mode 100644
index 0000000..a0f04bb
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -0,0 +1,436 @@
+/*
+ * Bonito Register Map
+ *
+ * This file is the original bonito.h from Algorithmics with minor changes
+ * to fit into linux.
+ *
+ * Copyright (c) 1999 Algorithmics Ltd
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2001 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * Algorithmics gives permission for anyone to use and modify this file
+ * without any obligation or license condition except that you retain
+ * this copyright message in any source redistribution in whole or part.
+ *
+ */
+
+/* Revision 1.48 autogenerated on 08/17/99 15:20:01 */
+/* This bonito64 version editted from bonito.h Revision 1.48 on 11/09/00 */
+
+#ifndef _ASM_MIPS_BOARDS_BONITO64_H
+#define _ASM_MIPS_BOARDS_BONITO64_H
+
+#ifdef __ASSEMBLY__
+
+/* offsets from base register */
+#define BONITO(x)	(x)
+
+#elif defined(CONFIG_LEMOTE_FULONG)
+
+#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x)))
+#define BONITO_IRQ_BASE   32
+
+#else
+
+/*
+ * Algorithmics Bonito64 system controller register base.
+ */
+extern unsigned long _pcictrl_bonito;
+extern unsigned long _pcictrl_bonito_pcicfg;
+
+#define BONITO(x)		*(volatile u32 *)(_pcictrl_bonito + (x))
+
+#endif /* __ASSEMBLY__ */
+
+
+#define BONITO_BOOT_BASE		0x1fc00000
+#define BONITO_BOOT_SIZE		0x00100000
+#define BONITO_BOOT_TOP 		(BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1)
+#define BONITO_FLASH_BASE		0x1c000000
+#define BONITO_FLASH_SIZE		0x03000000
+#define BONITO_FLASH_TOP		(BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1)
+#define BONITO_SOCKET_BASE		0x1f800000
+#define BONITO_SOCKET_SIZE		0x00400000
+#define BONITO_SOCKET_TOP		(BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1)
+#define BONITO_REG_BASE 		0x1fe00000
+#define BONITO_REG_SIZE 		0x00040000
+#define BONITO_REG_TOP			(BONITO_REG_BASE+BONITO_REG_SIZE-1)
+#define BONITO_DEV_BASE 		0x1ff00000
+#define BONITO_DEV_SIZE 		0x00100000
+#define BONITO_DEV_TOP			(BONITO_DEV_BASE+BONITO_DEV_SIZE-1)
+#define BONITO_PCILO_BASE		0x10000000
+#define BONITO_PCILO_SIZE		0x0c000000
+#define BONITO_PCILO_TOP		(BONITO_PCILO_BASE+BONITO_PCILO_SIZE-1)
+#define BONITO_PCILO0_BASE		0x10000000
+#define BONITO_PCILO1_BASE		0x14000000
+#define BONITO_PCILO2_BASE		0x18000000
+#define BONITO_PCIHI_BASE		0x20000000
+#define BONITO_PCIHI_SIZE		0x20000000
+#define BONITO_PCIHI_TOP		(BONITO_PCIHI_BASE+BONITO_PCIHI_SIZE-1)
+#define BONITO_PCIIO_BASE		0x1fd00000
+#define BONITO_PCIIO_SIZE		0x00100000
+#define BONITO_PCIIO_TOP		(BONITO_PCIIO_BASE+BONITO_PCIIO_SIZE-1)
+#define BONITO_PCICFG_BASE		0x1fe80000
+#define BONITO_PCICFG_SIZE		0x00080000
+#define BONITO_PCICFG_TOP		(BONITO_PCICFG_BASE+BONITO_PCICFG_SIZE-1)
+
+
+/* Bonito Register Bases */
+
+#define BONITO_PCICONFIGBASE		0x00
+#define BONITO_REGBASE			0x100
+
+
+/* PCI Configuration  Registers */
+
+#define BONITO_PCI_REG(x)               BONITO(BONITO_PCICONFIGBASE + (x))
+#define BONITO_PCIDID			BONITO_PCI_REG(0x00)
+#define BONITO_PCICMD			BONITO_PCI_REG(0x04)
+#define BONITO_PCICLASS 		BONITO_PCI_REG(0x08)
+#define BONITO_PCILTIMER		BONITO_PCI_REG(0x0c)
+#define BONITO_PCIBASE0 		BONITO_PCI_REG(0x10)
+#define BONITO_PCIBASE1 		BONITO_PCI_REG(0x14)
+#define BONITO_PCIBASE2 		BONITO_PCI_REG(0x18)
+#define BONITO_PCIEXPRBASE		BONITO_PCI_REG(0x30)
+#define BONITO_PCIINT			BONITO_PCI_REG(0x3c)
+
+#define BONITO_PCICMD_PERR_CLR		0x80000000
+#define BONITO_PCICMD_SERR_CLR		0x40000000
+#define BONITO_PCICMD_MABORT_CLR	0x20000000
+#define BONITO_PCICMD_MTABORT_CLR	0x10000000
+#define BONITO_PCICMD_TABORT_CLR	0x08000000
+#define BONITO_PCICMD_MPERR_CLR 	0x01000000
+#define BONITO_PCICMD_PERRRESPEN	0x00000040
+#define BONITO_PCICMD_ASTEPEN		0x00000080
+#define BONITO_PCICMD_SERREN		0x00000100
+#define BONITO_PCILTIMER_BUSLATENCY	0x0000ff00
+#define BONITO_PCILTIMER_BUSLATENCY_SHIFT	8
+
+
+
+
+/* 1. Bonito h/w Configuration */
+/* Power on register */
+
+#define BONITO_BONPONCFG		BONITO(BONITO_REGBASE + 0x00)
+
+#define BONITO_BONPONCFG_SYSCONTROLLERRD	0x00040000
+#define BONITO_BONPONCFG_ROMCS1SAMP	0x00020000
+#define BONITO_BONPONCFG_ROMCS0SAMP	0x00010000
+#define BONITO_BONPONCFG_CPUBIGEND	0x00004000
+/* Added by RPF 11-9-00 */
+#define BONITO_BONPONCFG_BURSTORDER	0x00001000
+/* --- */
+#define BONITO_BONPONCFG_CPUPARITY	0x00002000
+#define BONITO_BONPONCFG_CPUTYPE	0x00000007
+#define BONITO_BONPONCFG_CPUTYPE_SHIFT	0
+#define BONITO_BONPONCFG_PCIRESET_OUT	0x00000008
+#define BONITO_BONPONCFG_IS_ARBITER	0x00000010
+#define BONITO_BONPONCFG_ROMBOOT	0x000000c0
+#define BONITO_BONPONCFG_ROMBOOT_SHIFT	6
+
+#define BONITO_BONPONCFG_ROMBOOT_FLASH	(0x0<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_SOCKET (0x1<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_SDRAM	(0x2<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_CPURESET	(0x3<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+
+#define BONITO_BONPONCFG_ROMCS0WIDTH	0x00000100
+#define BONITO_BONPONCFG_ROMCS1WIDTH	0x00000200
+#define BONITO_BONPONCFG_ROMCS0FAST	0x00000400
+#define BONITO_BONPONCFG_ROMCS1FAST	0x00000800
+#define BONITO_BONPONCFG_CONFIG_DIS	0x00000020
+
+
+/* Other Bonito configuration */
+
+#define BONITO_BONGENCFG_OFFSET         0x4
+#define BONITO_BONGENCFG		BONITO(BONITO_REGBASE + BONITO_BONGENCFG_OFFSET)
+
+#define BONITO_BONGENCFG_DEBUGMODE	0x00000001
+#define BONITO_BONGENCFG_SNOOPEN	0x00000002
+#define BONITO_BONGENCFG_CPUSELFRESET	0x00000004
+
+#define BONITO_BONGENCFG_FORCE_IRQA	0x00000008
+#define BONITO_BONGENCFG_IRQA_ISOUT	0x00000010
+#define BONITO_BONGENCFG_IRQA_FROM_INT1 0x00000020
+#define BONITO_BONGENCFG_BYTESWAP	0x00000040
+
+#define BONITO_BONGENCFG_UNCACHED	0x00000080
+#define BONITO_BONGENCFG_PREFETCHEN	0x00000100
+#define BONITO_BONGENCFG_WBEHINDEN	0x00000200
+#define BONITO_BONGENCFG_CACHEALG	0x00000c00
+#define BONITO_BONGENCFG_CACHEALG_SHIFT 10
+#define BONITO_BONGENCFG_PCIQUEUE	0x00001000
+#define BONITO_BONGENCFG_CACHESTOP	0x00002000
+#define BONITO_BONGENCFG_MSTRBYTESWAP	0x00004000
+#define BONITO_BONGENCFG_BUSERREN	0x00008000
+#define BONITO_BONGENCFG_NORETRYTIMEOUT 0x00010000
+#define BONITO_BONGENCFG_SHORTCOPYTIMEOUT	0x00020000
+
+/* 2. IO & IDE configuration */
+
+#define BONITO_IODEVCFG 		BONITO(BONITO_REGBASE + 0x08)
+
+/* 3. IO & IDE configuration */
+
+#define BONITO_SDCFG			BONITO(BONITO_REGBASE + 0x0c)
+
+/* 4. PCI address map control */
+
+#define BONITO_PCIMAP			BONITO(BONITO_REGBASE + 0x10)
+#define BONITO_PCIMEMBASECFG		BONITO(BONITO_REGBASE + 0x14)
+#define BONITO_PCIMAP_CFG		BONITO(BONITO_REGBASE + 0x18)
+
+/* 5. ICU & GPIO regs */
+
+/* GPIO Regs - r/w */
+
+#define BONITO_GPIODATA_OFFSET          0x1c
+#define BONITO_GPIODATA 		BONITO(BONITO_REGBASE + BONITO_GPIODATA_OFFSET)
+#define BONITO_GPIOIE			BONITO(BONITO_REGBASE + 0x20)
+
+/* ICU Configuration Regs - r/w */
+
+#define BONITO_INTEDGE			BONITO(BONITO_REGBASE + 0x24)
+#define BONITO_INTSTEER 		BONITO(BONITO_REGBASE + 0x28)
+#define BONITO_INTPOL			BONITO(BONITO_REGBASE + 0x2c)
+
+/* ICU Enable Regs - IntEn & IntISR are r/o. */
+
+#define BONITO_INTENSET 		BONITO(BONITO_REGBASE + 0x30)
+#define BONITO_INTENCLR 		BONITO(BONITO_REGBASE + 0x34)
+#define BONITO_INTEN			BONITO(BONITO_REGBASE + 0x38)
+#define BONITO_INTISR			BONITO(BONITO_REGBASE + 0x3c)
+
+/* PCI mail boxes */
+
+#define BONITO_PCIMAIL0_OFFSET          0x40
+#define BONITO_PCIMAIL1_OFFSET          0x44
+#define BONITO_PCIMAIL2_OFFSET          0x48
+#define BONITO_PCIMAIL3_OFFSET          0x4c
+#define BONITO_PCIMAIL0 		BONITO(BONITO_REGBASE + 0x40)
+#define BONITO_PCIMAIL1 		BONITO(BONITO_REGBASE + 0x44)
+#define BONITO_PCIMAIL2 		BONITO(BONITO_REGBASE + 0x48)
+#define BONITO_PCIMAIL3 		BONITO(BONITO_REGBASE + 0x4c)
+
+
+/* 6. PCI cache */
+
+#define BONITO_PCICACHECTRL		BONITO(BONITO_REGBASE + 0x50)
+#define BONITO_PCICACHETAG		BONITO(BONITO_REGBASE + 0x54)
+
+#define BONITO_PCIBADADDR		BONITO(BONITO_REGBASE + 0x58)
+#define BONITO_PCIMSTAT 		BONITO(BONITO_REGBASE + 0x5c)
+
+
+/*
+#define BONITO_PCIRDPOST		BONITO(BONITO_REGBASE + 0x60)
+#define BONITO_PCIDATA			BONITO(BONITO_REGBASE + 0x64)
+*/
+
+/* 7. IDE DMA & Copier */
+
+#define BONITO_CONFIGBASE		0x000
+#define BONITO_BONITOBASE		0x100
+#define BONITO_LDMABASE 		0x200
+#define BONITO_COPBASE			0x300
+#define BONITO_REG_BLOCKMASK		0x300
+
+#define BONITO_LDMACTRL 		BONITO(BONITO_LDMABASE + 0x0)
+#define BONITO_LDMASTAT 		BONITO(BONITO_LDMABASE + 0x0)
+#define BONITO_LDMAADDR 		BONITO(BONITO_LDMABASE + 0x4)
+#define BONITO_LDMAGO			BONITO(BONITO_LDMABASE + 0x8)
+#define BONITO_LDMADATA 		BONITO(BONITO_LDMABASE + 0xc)
+
+#define BONITO_COPCTRL			BONITO(BONITO_COPBASE + 0x0)
+#define BONITO_COPSTAT			BONITO(BONITO_COPBASE + 0x0)
+#define BONITO_COPPADDR 		BONITO(BONITO_COPBASE + 0x4)
+#define BONITO_COPDADDR 		BONITO(BONITO_COPBASE + 0x8)
+#define BONITO_COPGO			BONITO(BONITO_COPBASE + 0xc)
+
+
+/* ###### Bit Definitions for individual Registers #### */
+
+/* Gen DMA. */
+
+#define BONITO_IDECOPDADDR_DMA_DADDR	0x0ffffffc
+#define BONITO_IDECOPDADDR_DMA_DADDR_SHIFT	2
+#define BONITO_IDECOPPADDR_DMA_PADDR	0xfffffffc
+#define BONITO_IDECOPPADDR_DMA_PADDR_SHIFT	2
+#define BONITO_IDECOPGO_DMA_SIZE	0x0000fffe
+#define BONITO_IDECOPGO_DMA_SIZE_SHIFT	0
+#define BONITO_IDECOPGO_DMA_WRITE	0x00010000
+#define BONITO_IDECOPGO_DMAWCOUNT	0x000f0000
+#define BONITO_IDECOPGO_DMAWCOUNT_SHIFT	16
+
+#define BONITO_IDECOPCTRL_DMA_STARTBIT	0x80000000
+#define BONITO_IDECOPCTRL_DMA_RSTBIT	0x40000000
+
+/* DRAM - sdCfg */
+
+#define BONITO_SDCFG_AROWBITS		0x00000003
+#define BONITO_SDCFG_AROWBITS_SHIFT	0
+#define BONITO_SDCFG_ACOLBITS		0x0000000c
+#define BONITO_SDCFG_ACOLBITS_SHIFT	2
+#define BONITO_SDCFG_ABANKBIT		0x00000010
+#define BONITO_SDCFG_ASIDES		0x00000020
+#define BONITO_SDCFG_AABSENT		0x00000040
+#define BONITO_SDCFG_AWIDTH64		0x00000080
+
+#define BONITO_SDCFG_BROWBITS		0x00000300
+#define BONITO_SDCFG_BROWBITS_SHIFT	8
+#define BONITO_SDCFG_BCOLBITS		0x00000c00
+#define BONITO_SDCFG_BCOLBITS_SHIFT	10
+#define BONITO_SDCFG_BBANKBIT		0x00001000
+#define BONITO_SDCFG_BSIDES		0x00002000
+#define BONITO_SDCFG_BABSENT		0x00004000
+#define BONITO_SDCFG_BWIDTH64		0x00008000
+
+#define BONITO_SDCFG_EXTRDDATA		0x00010000
+#define BONITO_SDCFG_EXTRASCAS		0x00020000
+#define BONITO_SDCFG_EXTPRECH		0x00040000
+#define BONITO_SDCFG_EXTRASWIDTH	0x00180000
+#define BONITO_SDCFG_EXTRASWIDTH_SHIFT	19
+/* Changed by RPF 11-9-00 */
+#define BONITO_SDCFG_DRAMMODESET	0x00200000
+/* --- */
+#define BONITO_SDCFG_DRAMEXTREGS	0x00400000
+#define BONITO_SDCFG_DRAMPARITY 	0x00800000
+/* Added by RPF 11-9-00 */
+#define BONITO_SDCFG_DRAMBURSTLEN 	0x03000000
+#define BONITO_SDCFG_DRAMBURSTLEN_SHIFT	24
+#define BONITO_SDCFG_DRAMMODESET_DONE 	0x80000000
+/* --- */
+
+/* PCI Cache - pciCacheCtrl */
+
+#define BONITO_PCICACHECTRL_CACHECMD	0x00000007
+#define BONITO_PCICACHECTRL_CACHECMD_SHIFT	0
+#define BONITO_PCICACHECTRL_CACHECMDLINE	0x00000018
+#define BONITO_PCICACHECTRL_CACHECMDLINE_SHIFT	3
+#define BONITO_PCICACHECTRL_CMDEXEC	0x00000020
+
+#define BONITO_PCICACHECTRL_IOBCCOH_PRES	0x00000100
+#define BONITO_PCICACHECTRL_IOBCCOH_EN	0x00000200
+#define BONITO_PCICACHECTRL_CPUCOH_PRES	0x00000400
+#define BONITO_PCICACHECTRL_CPUCOH_EN	0x00000800
+
+#define BONITO_IODEVCFG_BUFFBIT_CS0	0x00000001
+#define BONITO_IODEVCFG_SPEEDBIT_CS0	0x00000002
+#define BONITO_IODEVCFG_MOREABITS_CS0	0x00000004
+
+#define BONITO_IODEVCFG_BUFFBIT_CS1	0x00000008
+#define BONITO_IODEVCFG_SPEEDBIT_CS1	0x00000010
+#define BONITO_IODEVCFG_MOREABITS_CS1	0x00000020
+
+#define BONITO_IODEVCFG_BUFFBIT_CS2	0x00000040
+#define BONITO_IODEVCFG_SPEEDBIT_CS2	0x00000080
+#define BONITO_IODEVCFG_MOREABITS_CS2	0x00000100
+
+#define BONITO_IODEVCFG_BUFFBIT_CS3	0x00000200
+#define BONITO_IODEVCFG_SPEEDBIT_CS3	0x00000400
+#define BONITO_IODEVCFG_MOREABITS_CS3	0x00000800
+
+#define BONITO_IODEVCFG_BUFFBIT_IDE	0x00001000
+#define BONITO_IODEVCFG_SPEEDBIT_IDE	0x00002000
+#define BONITO_IODEVCFG_WORDSWAPBIT_IDE 0x00004000
+#define BONITO_IODEVCFG_MODEBIT_IDE	0x00008000
+#define BONITO_IODEVCFG_DMAON_IDE	0x001f0000
+#define BONITO_IODEVCFG_DMAON_IDE_SHIFT 16
+#define BONITO_IODEVCFG_DMAOFF_IDE	0x01e00000
+#define BONITO_IODEVCFG_DMAOFF_IDE_SHIFT	21
+#define BONITO_IODEVCFG_EPROMSPLIT	0x02000000
+/* Added by RPF 11-9-00 */
+#define BONITO_IODEVCFG_CPUCLOCKPERIOD	0xfc000000
+#define BONITO_IODEVCFG_CPUCLOCKPERIOD_SHIFT 26
+/* --- */
+
+/* gpio */
+#define BONITO_GPIO_GPIOW		0x000003ff
+#define BONITO_GPIO_GPIOW_SHIFT 	0
+#define BONITO_GPIO_GPIOR		0x01ff0000
+#define BONITO_GPIO_GPIOR_SHIFT 	16
+#define BONITO_GPIO_GPINR		0xfe000000
+#define BONITO_GPIO_GPINR_SHIFT 	25
+#define BONITO_GPIO_IOW(N)		(1<<(BONITO_GPIO_GPIOW_SHIFT+(N)))
+#define BONITO_GPIO_IOR(N)		(1<<(BONITO_GPIO_GPIOR_SHIFT+(N)))
+#define BONITO_GPIO_INR(N)		(1<<(BONITO_GPIO_GPINR_SHIFT+(N)))
+
+/* ICU */
+#define BONITO_ICU_MBOXES		0x0000000f
+#define BONITO_ICU_MBOXES_SHIFT 	0
+#define BONITO_ICU_DMARDY		0x00000010
+#define BONITO_ICU_DMAEMPTY		0x00000020
+#define BONITO_ICU_COPYRDY		0x00000040
+#define BONITO_ICU_COPYEMPTY		0x00000080
+#define BONITO_ICU_COPYERR		0x00000100
+#define BONITO_ICU_PCIIRQ		0x00000200
+#define BONITO_ICU_MASTERERR		0x00000400
+#define BONITO_ICU_SYSTEMERR		0x00000800
+#define BONITO_ICU_DRAMPERR		0x00001000
+#define BONITO_ICU_RETRYERR		0x00002000
+#define BONITO_ICU_GPIOS		0x01ff0000
+#define BONITO_ICU_GPIOS_SHIFT		16
+#define BONITO_ICU_GPINS		0x7e000000
+#define BONITO_ICU_GPINS_SHIFT		25
+#define BONITO_ICU_MBOX(N)		(1<<(BONITO_ICU_MBOXES_SHIFT+(N)))
+#define BONITO_ICU_GPIO(N)		(1<<(BONITO_ICU_GPIOS_SHIFT+(N)))
+#define BONITO_ICU_GPIN(N)		(1<<(BONITO_ICU_GPINS_SHIFT+(N)))
+
+/* pcimap */
+
+#define BONITO_PCIMAP_PCIMAP_LO0	0x0000003f
+#define BONITO_PCIMAP_PCIMAP_LO0_SHIFT	0
+#define BONITO_PCIMAP_PCIMAP_LO1	0x00000fc0
+#define BONITO_PCIMAP_PCIMAP_LO1_SHIFT	6
+#define BONITO_PCIMAP_PCIMAP_LO2	0x0003f000
+#define BONITO_PCIMAP_PCIMAP_LO2_SHIFT	12
+#define BONITO_PCIMAP_PCIMAP_2		0x00040000
+#define BONITO_PCIMAP_WIN(WIN, ADDR)	((((ADDR)>>26) & BONITO_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+
+#define BONITO_PCIMAP_WINSIZE           (1<<26)
+#define BONITO_PCIMAP_WINOFFSET(ADDR)	((ADDR) & (BONITO_PCIMAP_WINSIZE - 1))
+#define BONITO_PCIMAP_WINBASE(ADDR)	((ADDR) << 26)
+
+/* pcimembaseCfg */
+
+#define BONITO_PCIMEMBASECFG_MASK               0xf0000000
+#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK	0x0000001f
+#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK_SHIFT	0
+#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS	0x000003e0
+#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS_SHIFT	5
+#define BONITO_PCIMEMBASECFG_MEMBASE0_CACHED	0x00000400
+#define BONITO_PCIMEMBASECFG_MEMBASE0_IO	0x00000800
+
+#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK	0x0001f000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK_SHIFT	12
+#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS	0x003e0000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS_SHIFT	17
+#define BONITO_PCIMEMBASECFG_MEMBASE1_CACHED	0x00400000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_IO	0x00800000
+
+#define BONITO_PCIMEMBASECFG_ASHIFT	23
+#define BONITO_PCIMEMBASECFG_AMASK              0x007fffff
+#define BONITO_PCIMEMBASECFGSIZE(WIN, SIZE)	(((~((SIZE)-1))>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)
+#define BONITO_PCIMEMBASECFGBASE(WIN, BASE)	(((BASE)>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS)
+
+#define BONITO_PCIMEMBASECFG_SIZE(WIN, CFG)  (((((~(CFG)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)) << (BONITO_PCIMEMBASECFG_ASHIFT - BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) | BONITO_PCIMEMBASECFG_AMASK)
+
+
+#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)  ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)  ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+#define BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+
+#define BONITO_PCITOPHYS(WIN, ADDR, CFG)          ( \
+                                                  (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)))) | \
+                                                  (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG)) \
+                                                )
+
+/* PCICmd */
+
+#define BONITO_PCICMD_MEMEN		0x00000002
+#define BONITO_PCICMD_MSTREN		0x00000004
+
+
+#endif /* _ASM_MIPS_BOARDS_BONITO64_H */
diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h
new file mode 100644
index 0000000..7f0b034
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/generic.h
@@ -0,0 +1,104 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Defines of the MIPS boards specific address-MAP, registers, etc.
+ */
+#ifndef __ASM_MIPS_BOARDS_GENERIC_H
+#define __ASM_MIPS_BOARDS_GENERIC_H
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+#include <asm/mips-boards/bonito64.h>
+
+/*
+ * Display register base.
+ */
+#define ASCII_DISPLAY_WORD_BASE    0x1f000410
+#define ASCII_DISPLAY_POS_BASE     0x1f000418
+
+
+/*
+ * Yamon Prom print address.
+ */
+#define YAMON_PROM_PRINT_ADDR      0x1fc00504
+
+
+/*
+ * Reset register.
+ */
+#define SOFTRES_REG       0x1f000500
+#define GORESET           0x42
+
+/*
+ * Revision register.
+ */
+#define MIPS_REVISION_REG                  0x1fc00010
+#define MIPS_REVISION_CORID_QED_RM5261     0
+#define MIPS_REVISION_CORID_CORE_LV        1
+#define MIPS_REVISION_CORID_BONITO64       2
+#define MIPS_REVISION_CORID_CORE_20K       3
+#define MIPS_REVISION_CORID_CORE_FPGA      4
+#define MIPS_REVISION_CORID_CORE_MSC       5
+#define MIPS_REVISION_CORID_CORE_EMUL      6
+#define MIPS_REVISION_CORID_CORE_FPGA2     7
+#define MIPS_REVISION_CORID_CORE_FPGAR2    8
+#define MIPS_REVISION_CORID_CORE_FPGA3     9
+#define MIPS_REVISION_CORID_CORE_24K       10
+#define MIPS_REVISION_CORID_CORE_FPGA4     11
+#define MIPS_REVISION_CORID_CORE_FPGA5     12
+
+/**** Artificial corid defines ****/
+/*
+ *  CoreEMUL with   Bonito   System Controller is treated like a Core20K
+ *  CoreEMUL with SOC-it 101 System Controller is treated like a CoreMSC
+ */
+#define MIPS_REVISION_CORID_CORE_EMUL_BON  -1
+#define MIPS_REVISION_CORID_CORE_EMUL_MSC  -2
+
+#define MIPS_REVISION_CORID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 10) & 0x3f)
+
+extern int mips_revision_corid;
+
+#define MIPS_REVISION_SCON_OTHER	   0
+#define MIPS_REVISION_SCON_SOCITSC	   1
+#define MIPS_REVISION_SCON_SOCITSCP	   2
+
+/* Artificial SCON defines for MIPS_REVISION_SCON_OTHER */
+#define MIPS_REVISION_SCON_UNKNOWN	   -1
+#define MIPS_REVISION_SCON_GT64120	   -2
+#define MIPS_REVISION_SCON_BONITO	   -3
+#define MIPS_REVISION_SCON_BRTL		   -4
+#define MIPS_REVISION_SCON_SOCIT	   -5
+#define MIPS_REVISION_SCON_ROCIT	   -6
+
+#define MIPS_REVISION_SCONID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 24) & 0xff)
+
+extern int mips_revision_sconid;
+
+extern void mips_reboot_setup(void);
+
+#ifdef CONFIG_PCI
+extern void mips_pcibios_init(void);
+#else
+#define mips_pcibios_init() do { } while (0)
+#endif
+
+#ifdef CONFIG_KGDB
+extern void kgdb_config(void);
+#endif
+
+#endif  /* __ASM_MIPS_BOARDS_GENERIC_H */
diff --git a/arch/mips/include/asm/mips-boards/launch.h b/arch/mips/include/asm/mips-boards/launch.h
new file mode 100644
index 0000000..d8ae7f9
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/launch.h
@@ -0,0 +1,35 @@
+/*
+ *
+ */
+
+#ifndef _ASSEMBLER_
+
+struct cpulaunch {
+    unsigned long	pc;
+    unsigned long	gp;
+    unsigned long	sp;
+    unsigned long	a0;
+    unsigned long	_pad[3]; /* pad to cache line size to avoid thrashing */
+    unsigned long	flags;
+};
+
+#else
+
+#define LOG2CPULAUNCH	5
+#define	LAUNCH_PC	0
+#define	LAUNCH_GP	4
+#define	LAUNCH_SP	8
+#define	LAUNCH_A0	12
+#define	LAUNCH_FLAGS	28
+
+#endif
+
+#define LAUNCH_FREADY	1
+#define LAUNCH_FGO	2
+#define LAUNCH_FGONE	4
+
+#define CPULAUNCH	0x00000f00
+#define NCPULAUNCH	8
+
+/* Polling period in count cycles for secondary CPU's */
+#define LAUNCHPERIOD	10000
diff --git a/arch/mips/include/asm/mips-boards/malta.h b/arch/mips/include/asm/mips-boards/malta.h
new file mode 100644
index 0000000..c189157
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/malta.h
@@ -0,0 +1,102 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Defines of the Malta board specific address-MAP, registers, etc.
+ */
+#ifndef __ASM_MIPS_BOARDS_MALTA_H
+#define __ASM_MIPS_BOARDS_MALTA_H
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mips-boards/msc01_pci.h>
+#include <asm/gt64120.h>
+
+/* Mips interrupt controller found in SOCit variations */
+#define MIPS_MSC01_IC_REG_BASE		0x1bc40000
+#define MIPS_SOCITSC_IC_REG_BASE	0x1ffa0000
+
+/*
+ * Malta I/O ports base address for the Galileo GT64120 and Algorithmics
+ * Bonito system controllers.
+ */
+#define MALTA_GT_PORT_BASE      get_gt_port_base(GT_PCI0IOLD_OFS)
+#define MALTA_BONITO_PORT_BASE  ((unsigned long)ioremap (0x1fd00000, 0x10000))
+#define MALTA_MSC_PORT_BASE     get_msc_port_base(MSC01_PCI_SC2PIOBASL)
+
+static inline unsigned long get_gt_port_base(unsigned long reg)
+{
+	unsigned long addr;
+	addr = GT_READ(reg);
+	return (unsigned long) ioremap (((addr & 0xffff) << 21), 0x10000);
+}
+
+static inline unsigned long get_msc_port_base(unsigned long reg)
+{
+	unsigned long addr;
+	MSC_READ(reg, addr);
+	return (unsigned long) ioremap(addr, 0x10000);
+}
+
+/*
+ * GCMP Specific definitions
+ */
+#define GCMP_BASE_ADDR			0x1fbf8000
+#define GCMP_ADDRSPACE_SZ		(256 * 1024)
+
+/*
+ * GIC Specific definitions
+ */
+#define GIC_BASE_ADDR			0x1bdc0000
+#define GIC_ADDRSPACE_SZ		(128 * 1024)
+
+/*
+ * MSC01 BIU Specific definitions
+ * FIXME : These should be elsewhere ?
+ */
+#define MSC01_BIU_REG_BASE		0x1bc80000
+#define MSC01_BIU_ADDRSPACE_SZ		(256 * 1024)
+#define MSC01_SC_CFG_OFS		0x0110
+#define MSC01_SC_CFG_GICPRES_MSK	0x00000004
+#define MSC01_SC_CFG_GICPRES_SHF	2
+#define MSC01_SC_CFG_GICENA_SHF		3
+
+/*
+ * Malta RTC-device indirect register access.
+ */
+#define MALTA_RTC_ADR_REG       0x70
+#define MALTA_RTC_DAT_REG       0x71
+
+/*
+ * Malta SMSC FDC37M817 Super I/O Controller register.
+ */
+#define SMSC_CONFIG_REG		0x3f0
+#define SMSC_DATA_REG		0x3f1
+
+#define SMSC_CONFIG_DEVNUM	0x7
+#define SMSC_CONFIG_ACTIVATE	0x30
+#define SMSC_CONFIG_ENTER	0x55
+#define SMSC_CONFIG_EXIT	0xaa
+
+#define SMSC_CONFIG_DEVNUM_FLOPPY     0
+
+#define SMSC_CONFIG_ACTIVATE_ENABLE   1
+
+#define SMSC_WRITE(x, a)     outb(x, a)
+
+#define MALTA_JMPRS_REG		0x1f000210
+
+#endif /* __ASM_MIPS_BOARDS_MALTA_H */
diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h
new file mode 100644
index 0000000..cea872f
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/maltaint.h
@@ -0,0 +1,110 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Defines for the Malta interrupt controller.
+ *
+ */
+#ifndef _MIPS_MALTAINT_H
+#define _MIPS_MALTAINT_H
+
+#include <irq.h>
+
+/*
+ * Interrupts 0..15 are used for Malta ISA compatible interrupts
+ */
+#define MALTA_INT_BASE		0
+
+/* CPU interrupt offsets */
+#define MIPSCPU_INT_SW0		0
+#define MIPSCPU_INT_SW1		1
+#define MIPSCPU_INT_MB0		2
+#define MIPSCPU_INT_I8259A	MIPSCPU_INT_MB0
+#define MIPSCPU_INT_MB1		3
+#define MIPSCPU_INT_SMI		MIPSCPU_INT_MB1
+#define MIPSCPU_INT_IPI0	MIPSCPU_INT_MB1	/* GIC IPI */
+#define MIPSCPU_INT_MB2		4
+#define MIPSCPU_INT_IPI1	MIPSCPU_INT_MB2	/* GIC IPI */
+#define MIPSCPU_INT_MB3		5
+#define MIPSCPU_INT_COREHI	MIPSCPU_INT_MB3
+#define MIPSCPU_INT_MB4		6
+#define MIPSCPU_INT_CORELO	MIPSCPU_INT_MB4
+
+/*
+ * Interrupts 64..127 are used for Soc-it Classic interrupts
+ */
+#define MSC01C_INT_BASE		64
+
+/* SOC-it Classic interrupt offsets */
+#define MSC01C_INT_TMR		0
+#define MSC01C_INT_PCI		1
+
+/*
+ * Interrupts 64..127 are used for Soc-it EIC interrupts
+ */
+#define MSC01E_INT_BASE		64
+
+/* SOC-it EIC interrupt offsets */
+#define MSC01E_INT_SW0		1
+#define MSC01E_INT_SW1		2
+#define MSC01E_INT_MB0		3
+#define MSC01E_INT_I8259A	MSC01E_INT_MB0
+#define MSC01E_INT_MB1		4
+#define MSC01E_INT_SMI		MSC01E_INT_MB1
+#define MSC01E_INT_MB2		5
+#define MSC01E_INT_MB3		6
+#define MSC01E_INT_COREHI	MSC01E_INT_MB3
+#define MSC01E_INT_MB4		7
+#define MSC01E_INT_CORELO	MSC01E_INT_MB4
+#define MSC01E_INT_TMR		8
+#define MSC01E_INT_PCI		9
+#define MSC01E_INT_PERFCTR	10
+#define MSC01E_INT_CPUCTR	11
+
+/* GIC's Nomenclature for Core Interrupt Pins on the Malta */
+#define GIC_CPU_INT0		0 /* Core Interrupt 2 	*/
+#define GIC_CPU_INT1		1 /* .			*/
+#define GIC_CPU_INT2		2 /* .			*/
+#define GIC_CPU_INT3		3 /* .			*/
+#define GIC_CPU_INT4		4 /* .			*/
+#define GIC_CPU_INT5		5 /* Core Interrupt 5   */
+
+#define GIC_EXT_INTR(x)		x
+
+/* Dummy data */
+#define X			0xdead
+
+/* External Interrupts used for IPI */
+#define GIC_IPI_EXT_INTR_RESCHED_VPE0	16
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE0	17
+#define GIC_IPI_EXT_INTR_RESCHED_VPE1	18
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE1	19
+#define GIC_IPI_EXT_INTR_RESCHED_VPE2	20
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE2	21
+#define GIC_IPI_EXT_INTR_RESCHED_VPE3	22
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE3	23
+
+#define MIPS_GIC_IRQ_BASE	(MIPS_CPU_IRQ_BASE + 8)
+
+#ifndef __ASSEMBLY__
+extern void maltaint_init(void);
+#endif
+
+#endif /* !(_MIPS_MALTAINT_H) */
diff --git a/arch/mips/include/asm/mips-boards/msc01_pci.h b/arch/mips/include/asm/mips-boards/msc01_pci.h
new file mode 100644
index 0000000..e036b7d
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/msc01_pci.h
@@ -0,0 +1,258 @@
+/*
+ * PCI Register definitions for the MIPS System Controller.
+ *
+ * Copyright (C) 2002, 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_MIPS_BOARDS_MSC01_PCI_H
+#define __ASM_MIPS_BOARDS_MSC01_PCI_H
+
+/*
+ * Register offset addresses
+ */
+
+#define MSC01_PCI_ID_OFS		0x0000
+#define MSC01_PCI_SC2PMBASL_OFS		0x0208
+#define MSC01_PCI_SC2PMMSKL_OFS		0x0218
+#define MSC01_PCI_SC2PMMAPL_OFS		0x0228
+#define MSC01_PCI_SC2PIOBASL_OFS	0x0248
+#define MSC01_PCI_SC2PIOMSKL_OFS	0x0258
+#define MSC01_PCI_SC2PIOMAPL_OFS	0x0268
+#define MSC01_PCI_P2SCMSKL_OFS		0x0308
+#define MSC01_PCI_P2SCMAPL_OFS		0x0318
+#define MSC01_PCI_INTCFG_OFS		0x0600
+#define MSC01_PCI_INTSTAT_OFS		0x0608
+#define MSC01_PCI_CFGADDR_OFS		0x0610
+#define MSC01_PCI_CFGDATA_OFS		0x0618
+#define MSC01_PCI_IACK_OFS		0x0620
+#define MSC01_PCI_HEAD0_OFS		0x2000	/* DevID, VendorID */
+#define MSC01_PCI_HEAD1_OFS		0x2008	/* Status, Command */
+#define MSC01_PCI_HEAD2_OFS		0x2010	/* Class code, RevID */
+#define MSC01_PCI_HEAD3_OFS		0x2018	/* bist, header, latency */
+#define MSC01_PCI_HEAD4_OFS		0x2020	/* BAR 0 */
+#define MSC01_PCI_HEAD5_OFS		0x2028	/* BAR 1 */
+#define MSC01_PCI_HEAD6_OFS		0x2030	/* BAR 2 */
+#define MSC01_PCI_HEAD7_OFS		0x2038	/* BAR 3 */
+#define MSC01_PCI_HEAD8_OFS		0x2040	/* BAR 4 */
+#define MSC01_PCI_HEAD9_OFS		0x2048	/* BAR 5 */
+#define MSC01_PCI_HEAD10_OFS		0x2050	/* CardBus CIS Ptr */
+#define MSC01_PCI_HEAD11_OFS		0x2058	/* SubSystem ID, -VendorID */
+#define MSC01_PCI_HEAD12_OFS		0x2060	/* ROM BAR */
+#define MSC01_PCI_HEAD13_OFS		0x2068	/* Capabilities ptr */
+#define MSC01_PCI_HEAD14_OFS		0x2070	/* reserved */
+#define MSC01_PCI_HEAD15_OFS		0x2078	/* Maxl, ming, intpin, int */
+#define MSC01_PCI_BAR0_OFS		0x2220
+#define MSC01_PCI_CFG_OFS		0x2380
+#define MSC01_PCI_SWAP_OFS		0x2388
+
+
+/*****************************************************************************
+ * Register encodings
+ ****************************************************************************/
+
+#define MSC01_PCI_ID_ID_SHF		16
+#define MSC01_PCI_ID_ID_MSK		0x00ff0000
+#define MSC01_PCI_ID_ID_HOSTBRIDGE	82
+#define MSC01_PCI_ID_MAR_SHF		8
+#define MSC01_PCI_ID_MAR_MSK		0x0000ff00
+#define MSC01_PCI_ID_MIR_SHF		0
+#define MSC01_PCI_ID_MIR_MSK		0x000000ff
+
+#define MSC01_PCI_SC2PMBASL_BAS_SHF	24
+#define MSC01_PCI_SC2PMBASL_BAS_MSK	0xff000000
+
+#define MSC01_PCI_SC2PMMSKL_MSK_SHF	24
+#define MSC01_PCI_SC2PMMSKL_MSK_MSK	0xff000000
+
+#define MSC01_PCI_SC2PMMAPL_MAP_SHF	24
+#define MSC01_PCI_SC2PMMAPL_MAP_MSK	0xff000000
+
+#define MSC01_PCI_SC2PIOBASL_BAS_SHF	24
+#define MSC01_PCI_SC2PIOBASL_BAS_MSK	0xff000000
+
+#define MSC01_PCI_SC2PIOMSKL_MSK_SHF	24
+#define MSC01_PCI_SC2PIOMSKL_MSK_MSK	0xff000000
+
+#define MSC01_PCI_SC2PIOMAPL_MAP_SHF	24
+#define MSC01_PCI_SC2PIOMAPL_MAP_MSK	0xff000000
+
+#define MSC01_PCI_P2SCMSKL_MSK_SHF	24
+#define MSC01_PCI_P2SCMSKL_MSK_MSK	0xff000000
+
+#define MSC01_PCI_P2SCMAPL_MAP_SHF	24
+#define MSC01_PCI_P2SCMAPL_MAP_MSK	0xff000000
+
+#define MSC01_PCI_INTCFG_RST_SHF	10
+#define MSC01_PCI_INTCFG_RST_MSK	0x00000400
+#define MSC01_PCI_INTCFG_RST_BIT	0x00000400
+#define MSC01_PCI_INTCFG_MWE_SHF	9
+#define MSC01_PCI_INTCFG_MWE_MSK	0x00000200
+#define MSC01_PCI_INTCFG_MWE_BIT	0x00000200
+#define MSC01_PCI_INTCFG_DTO_SHF	8
+#define MSC01_PCI_INTCFG_DTO_MSK	0x00000100
+#define MSC01_PCI_INTCFG_DTO_BIT	0x00000100
+#define MSC01_PCI_INTCFG_MA_SHF		7
+#define MSC01_PCI_INTCFG_MA_MSK		0x00000080
+#define MSC01_PCI_INTCFG_MA_BIT		0x00000080
+#define MSC01_PCI_INTCFG_TA_SHF		6
+#define MSC01_PCI_INTCFG_TA_MSK		0x00000040
+#define MSC01_PCI_INTCFG_TA_BIT		0x00000040
+#define MSC01_PCI_INTCFG_RTY_SHF	5
+#define MSC01_PCI_INTCFG_RTY_MSK	0x00000020
+#define MSC01_PCI_INTCFG_RTY_BIT	0x00000020
+#define MSC01_PCI_INTCFG_MWP_SHF	4
+#define MSC01_PCI_INTCFG_MWP_MSK	0x00000010
+#define MSC01_PCI_INTCFG_MWP_BIT	0x00000010
+#define MSC01_PCI_INTCFG_MRP_SHF	3
+#define MSC01_PCI_INTCFG_MRP_MSK	0x00000008
+#define MSC01_PCI_INTCFG_MRP_BIT	0x00000008
+#define MSC01_PCI_INTCFG_SWP_SHF	2
+#define MSC01_PCI_INTCFG_SWP_MSK	0x00000004
+#define MSC01_PCI_INTCFG_SWP_BIT	0x00000004
+#define MSC01_PCI_INTCFG_SRP_SHF	1
+#define MSC01_PCI_INTCFG_SRP_MSK	0x00000002
+#define MSC01_PCI_INTCFG_SRP_BIT	0x00000002
+#define MSC01_PCI_INTCFG_SE_SHF		0
+#define MSC01_PCI_INTCFG_SE_MSK		0x00000001
+#define MSC01_PCI_INTCFG_SE_BIT		0x00000001
+
+#define MSC01_PCI_INTSTAT_RST_SHF	10
+#define MSC01_PCI_INTSTAT_RST_MSK	0x00000400
+#define MSC01_PCI_INTSTAT_RST_BIT	0x00000400
+#define MSC01_PCI_INTSTAT_MWE_SHF	9
+#define MSC01_PCI_INTSTAT_MWE_MSK	0x00000200
+#define MSC01_PCI_INTSTAT_MWE_BIT	0x00000200
+#define MSC01_PCI_INTSTAT_DTO_SHF	8
+#define MSC01_PCI_INTSTAT_DTO_MSK	0x00000100
+#define MSC01_PCI_INTSTAT_DTO_BIT	0x00000100
+#define MSC01_PCI_INTSTAT_MA_SHF	7
+#define MSC01_PCI_INTSTAT_MA_MSK	0x00000080
+#define MSC01_PCI_INTSTAT_MA_BIT	0x00000080
+#define MSC01_PCI_INTSTAT_TA_SHF	6
+#define MSC01_PCI_INTSTAT_TA_MSK	0x00000040
+#define MSC01_PCI_INTSTAT_TA_BIT	0x00000040
+#define MSC01_PCI_INTSTAT_RTY_SHF	5
+#define MSC01_PCI_INTSTAT_RTY_MSK	0x00000020
+#define MSC01_PCI_INTSTAT_RTY_BIT	0x00000020
+#define MSC01_PCI_INTSTAT_MWP_SHF	4
+#define MSC01_PCI_INTSTAT_MWP_MSK	0x00000010
+#define MSC01_PCI_INTSTAT_MWP_BIT	0x00000010
+#define MSC01_PCI_INTSTAT_MRP_SHF	3
+#define MSC01_PCI_INTSTAT_MRP_MSK	0x00000008
+#define MSC01_PCI_INTSTAT_MRP_BIT	0x00000008
+#define MSC01_PCI_INTSTAT_SWP_SHF	2
+#define MSC01_PCI_INTSTAT_SWP_MSK	0x00000004
+#define MSC01_PCI_INTSTAT_SWP_BIT	0x00000004
+#define MSC01_PCI_INTSTAT_SRP_SHF	1
+#define MSC01_PCI_INTSTAT_SRP_MSK	0x00000002
+#define MSC01_PCI_INTSTAT_SRP_BIT	0x00000002
+#define MSC01_PCI_INTSTAT_SE_SHF	0
+#define MSC01_PCI_INTSTAT_SE_MSK	0x00000001
+#define MSC01_PCI_INTSTAT_SE_BIT	0x00000001
+
+#define MSC01_PCI_CFGADDR_BNUM_SHF	16
+#define MSC01_PCI_CFGADDR_BNUM_MSK	0x00ff0000
+#define MSC01_PCI_CFGADDR_DNUM_SHF	11
+#define MSC01_PCI_CFGADDR_DNUM_MSK	0x0000f800
+#define MSC01_PCI_CFGADDR_FNUM_SHF	8
+#define MSC01_PCI_CFGADDR_FNUM_MSK	0x00000700
+#define MSC01_PCI_CFGADDR_RNUM_SHF	2
+#define MSC01_PCI_CFGADDR_RNUM_MSK	0x000000fc
+
+#define MSC01_PCI_CFGDATA_DATA_SHF	0
+#define MSC01_PCI_CFGDATA_DATA_MSK	0xffffffff
+
+/* The defines below are ONLY valid for a MEM bar! */
+#define MSC01_PCI_BAR0_SIZE_SHF		4
+#define MSC01_PCI_BAR0_SIZE_MSK		0xfffffff0
+#define MSC01_PCI_BAR0_P_SHF		3
+#define MSC01_PCI_BAR0_P_MSK		0x00000008
+#define MSC01_PCI_BAR0_P_BIT		MSC01_PCI_BAR0_P_MSK
+#define MSC01_PCI_BAR0_D_SHF		1
+#define MSC01_PCI_BAR0_D_MSK		0x00000006
+#define MSC01_PCI_BAR0_T_SHF		0
+#define MSC01_PCI_BAR0_T_MSK		0x00000001
+#define MSC01_PCI_BAR0_T_BIT		MSC01_PCI_BAR0_T_MSK
+
+
+#define MSC01_PCI_CFG_RA_SHF		17
+#define MSC01_PCI_CFG_RA_MSK		0x00020000
+#define MSC01_PCI_CFG_RA_BIT		MSC01_PCI_CFG_RA_MSK
+#define MSC01_PCI_CFG_G_SHF		16
+#define MSC01_PCI_CFG_G_MSK		0x00010000
+#define MSC01_PCI_CFG_G_BIT		MSC01_PCI_CFG_G_MSK
+#define MSC01_PCI_CFG_EN_SHF		15
+#define MSC01_PCI_CFG_EN_MSK		0x00008000
+#define MSC01_PCI_CFG_EN_BIT		MSC01_PCI_CFG_EN_MSK
+#define MSC01_PCI_CFG_MAXRTRY_SHF	0
+#define MSC01_PCI_CFG_MAXRTRY_MSK	0x00000fff
+
+#define MSC01_PCI_SWAP_IO_SHF		18
+#define MSC01_PCI_SWAP_IO_MSK		0x000c0000
+#define MSC01_PCI_SWAP_MEM_SHF		16
+#define MSC01_PCI_SWAP_MEM_MSK		0x00030000
+#define MSC01_PCI_SWAP_BAR0_SHF		0
+#define MSC01_PCI_SWAP_BAR0_MSK		0x00000003
+#define MSC01_PCI_SWAP_NOSWAP		0
+#define MSC01_PCI_SWAP_BYTESWAP		1
+
+/*
+ * MIPS System controller PCI register base.
+ *
+ * FIXME - are these macros specific to Malta and co or to the MSC?  If the
+ * latter, they should be moved elsewhere.
+ */
+#define MIPS_MSC01_PCI_REG_BASE		0x1bd00000
+#define MIPS_SOCITSC_PCI_REG_BASE	0x1ff10000
+
+extern unsigned long _pcictrl_msc;
+
+#define MSC01_PCI_REG_BASE	_pcictrl_msc
+
+#define MSC_WRITE(reg, data)	do { *(volatile u32 *)(reg) = data; } while (0)
+#define MSC_READ(reg, data)	do { data = *(volatile u32 *)(reg); } while (0)
+
+/*
+ * Registers absolute addresses
+ */
+
+#define MSC01_PCI_ID		(MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS)
+#define MSC01_PCI_SC2PMBASL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS)
+#define MSC01_PCI_SC2PMMSKL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS)
+#define MSC01_PCI_SC2PMMAPL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS)
+#define MSC01_PCI_SC2PIOBASL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS)
+#define MSC01_PCI_SC2PIOMSKL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS)
+#define MSC01_PCI_SC2PIOMAPL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS)
+#define MSC01_PCI_P2SCMSKL	(MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS)
+#define MSC01_PCI_P2SCMAPL	(MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS)
+#define MSC01_PCI_INTCFG	(MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS)
+#define MSC01_PCI_INTSTAT	(MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS)
+#define MSC01_PCI_CFGADDR	(MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS)
+#define MSC01_PCI_CFGDATA	(MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS)
+#define MSC01_PCI_IACK		(MSC01_PCI_REG_BASE + MSC01_PCI_IACK_OFS)
+#define MSC01_PCI_HEAD0		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD0_OFS)
+#define MSC01_PCI_HEAD1		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD1_OFS)
+#define MSC01_PCI_HEAD2		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD2_OFS)
+#define MSC01_PCI_HEAD3		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD3_OFS)
+#define MSC01_PCI_HEAD4		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD4_OFS)
+#define MSC01_PCI_HEAD5		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD5_OFS)
+#define MSC01_PCI_HEAD6		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD6_OFS)
+#define MSC01_PCI_HEAD7		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD7_OFS)
+#define MSC01_PCI_HEAD8		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD8_OFS)
+#define MSC01_PCI_HEAD9		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD9_OFS)
+#define MSC01_PCI_HEAD10	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD10_OFS)
+#define MSC01_PCI_HEAD11	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD12	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD13	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD14	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD15	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_BAR0		(MSC01_PCI_REG_BASE + MSC01_PCI_BAR0_OFS)
+#define MSC01_PCI_CFG		(MSC01_PCI_REG_BASE + MSC01_PCI_CFG_OFS)
+#define MSC01_PCI_SWAP		(MSC01_PCI_REG_BASE + MSC01_PCI_SWAP_OFS)
+
+#endif /* __ASM_MIPS_BOARDS_MSC01_PCI_H */
diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h
new file mode 100644
index 0000000..2971d60
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/piix4.h
@@ -0,0 +1,80 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Register definitions for Intel PIIX4 South Bridge Device.
+ */
+#ifndef __ASM_MIPS_BOARDS_PIIX4_H
+#define __ASM_MIPS_BOARDS_PIIX4_H
+
+/************************************************************************
+ *  IO register offsets
+ ************************************************************************/
+#define PIIX4_ICTLR1_ICW1	0x20
+#define PIIX4_ICTLR1_ICW2	0x21
+#define PIIX4_ICTLR1_ICW3	0x21
+#define PIIX4_ICTLR1_ICW4	0x21
+#define PIIX4_ICTLR2_ICW1	0xa0
+#define PIIX4_ICTLR2_ICW2	0xa1
+#define PIIX4_ICTLR2_ICW3	0xa1
+#define PIIX4_ICTLR2_ICW4	0xa1
+#define PIIX4_ICTLR1_OCW1	0x21
+#define PIIX4_ICTLR1_OCW2	0x20
+#define PIIX4_ICTLR1_OCW3	0x20
+#define PIIX4_ICTLR1_OCW4	0x20
+#define PIIX4_ICTLR2_OCW1	0xa1
+#define PIIX4_ICTLR2_OCW2	0xa0
+#define PIIX4_ICTLR2_OCW3	0xa0
+#define PIIX4_ICTLR2_OCW4	0xa0
+
+
+/************************************************************************
+ *  Register encodings.
+ ************************************************************************/
+#define PIIX4_OCW2_NSEOI	(0x1 << 5)
+#define PIIX4_OCW2_SEOI		(0x3 << 5)
+#define PIIX4_OCW2_RNSEOI	(0x5 << 5)
+#define PIIX4_OCW2_RAEOIS	(0x4 << 5)
+#define PIIX4_OCW2_RAEOIC	(0x0 << 5)
+#define PIIX4_OCW2_RSEOI	(0x7 << 5)
+#define PIIX4_OCW2_SP		(0x6 << 5)
+#define PIIX4_OCW2_NOP		(0x2 << 5)
+
+#define PIIX4_OCW2_SEL          (0x0 << 3)
+
+#define PIIX4_OCW2_ILS_0	0
+#define PIIX4_OCW2_ILS_1	1
+#define PIIX4_OCW2_ILS_2	2
+#define PIIX4_OCW2_ILS_3	3
+#define PIIX4_OCW2_ILS_4	4
+#define PIIX4_OCW2_ILS_5	5
+#define PIIX4_OCW2_ILS_6	6
+#define PIIX4_OCW2_ILS_7	7
+#define PIIX4_OCW2_ILS_8	0
+#define PIIX4_OCW2_ILS_9	1
+#define PIIX4_OCW2_ILS_10	2
+#define PIIX4_OCW2_ILS_11	3
+#define PIIX4_OCW2_ILS_12	4
+#define PIIX4_OCW2_ILS_13	5
+#define PIIX4_OCW2_ILS_14	6
+#define PIIX4_OCW2_ILS_15	7
+
+#define PIIX4_OCW3_SEL          (0x1 << 3)
+
+#define PIIX4_OCW3_IRR          0x2
+#define PIIX4_OCW3_ISR          0x3
+
+#endif /* __ASM_MIPS_BOARDS_PIIX4_H */
diff --git a/arch/mips/include/asm/mips-boards/prom.h b/arch/mips/include/asm/mips-boards/prom.h
new file mode 100644
index 0000000..a9db576
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/prom.h
@@ -0,0 +1,47 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ */
+
+#ifndef _MIPS_PROM_H
+#define _MIPS_PROM_H
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+extern void mips_display_message(const char *str);
+extern void mips_display_word(unsigned int num);
+extern void mips_scroll_message(void);
+extern int get_ethernet_addr(char *ethernet_addr);
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS    32
+struct prom_pmemblock {
+        unsigned long base; /* Within KSEG0. */
+        unsigned int size;  /* In bytes. */
+        unsigned int type;  /* free or prom memory */
+};
+
+#endif /* !(_MIPS_PROM_H) */
diff --git a/arch/mips/include/asm/mips-boards/sim.h b/arch/mips/include/asm/mips-boards/sim.h
new file mode 100644
index 0000000..acb7c23
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/sim.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_MIPS_BOARDS_SIM_H
+#define _ASM_MIPS_BOARDS_SIM_H
+
+#define STATS_ON        1
+#define STATS_OFF       2
+#define STATS_CLEAR     3
+#define STATS_DUMP      4
+#define TRACE_ON		5
+#define TRACE_OFF       6
+
+
+#define simcfg(code)						\
+({					   \
+	__asm__  __volatile__( \
+        "sltiu $0,$0, %0" \
+		::"i"(code)					\
+		); \
+})
+
+
+
+#endif
diff --git a/arch/mips/include/asm/mips-boards/simint.h b/arch/mips/include/asm/mips-boards/simint.h
new file mode 100644
index 0000000..8ef6db7
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/simint.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#ifndef _MIPS_SIMINT_H
+#define _MIPS_SIMINT_H
+
+#include <irq.h>
+
+#define SIM_INT_BASE		0
+#define MIPSCPU_INT_MB0		2
+#define MIPS_CPU_TIMER_IRQ	7
+
+
+#define MSC01E_INT_BASE		64
+
+#define MSC01E_INT_CPUCTR	11
+
+#endif
diff --git a/arch/mips/include/asm/mips_mt.h b/arch/mips/include/asm/mips_mt.h
new file mode 100644
index 0000000..ac79352
--- /dev/null
+++ b/arch/mips/include/asm/mips_mt.h
@@ -0,0 +1,26 @@
+/*
+ * Definitions and decalrations for MIPS MT support
+ * that are common between SMTC, VSMP, and/or AP/SP
+ * kernel models.
+ */
+#ifndef __ASM_MIPS_MT_H
+#define __ASM_MIPS_MT_H
+
+#include <linux/cpumask.h>
+
+/*
+ * How many VPEs and TCs is Linux allowed to use?  0 means no limit.
+ */
+extern int tclimit;
+extern int vpelimit;
+
+extern cpumask_t mt_fpu_cpumask;
+extern unsigned long mt_fpemul_threshold;
+
+extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value);
+extern void mips_mt_set_cpuoptions(void);
+
+struct class;
+extern struct class *mt_class;
+
+#endif /* __ASM_MIPS_MT_H */
diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h
new file mode 100644
index 0000000..c9420aa
--- /dev/null
+++ b/arch/mips/include/asm/mipsmtregs.h
@@ -0,0 +1,395 @@
+/*
+ * MT regs definitions, follows on from mipsregs.h
+ * Copyright (C) 2004 - 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Elizabeth Clarke et. al.
+ *
+ */
+#ifndef _ASM_MIPSMTREGS_H
+#define _ASM_MIPSMTREGS_H
+
+#include <asm/mipsregs.h>
+#include <asm/war.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * C macros
+ */
+
+#define read_c0_mvpcontrol()		__read_32bit_c0_register($0, 1)
+#define write_c0_mvpcontrol(val)	__write_32bit_c0_register($0, 1, val)
+
+#define read_c0_mvpconf0()		__read_32bit_c0_register($0, 2)
+#define read_c0_mvpconf1()		__read_32bit_c0_register($0, 3)
+
+#define read_c0_vpecontrol()		__read_32bit_c0_register($1, 1)
+#define write_c0_vpecontrol(val)	__write_32bit_c0_register($1, 1, val)
+
+#define read_c0_vpeconf0()		__read_32bit_c0_register($1, 2)
+#define write_c0_vpeconf0(val)		__write_32bit_c0_register($1, 2, val)
+
+#define read_c0_tcstatus()		__read_32bit_c0_register($2, 1)
+#define write_c0_tcstatus(val)		__write_32bit_c0_register($2, 1, val)
+
+#define read_c0_tcbind()		__read_32bit_c0_register($2, 2)
+
+#define read_c0_tccontext()		__read_32bit_c0_register($2, 5)
+#define write_c0_tccontext(val)		__write_32bit_c0_register($2, 5, val)
+
+#else /* Assembly */
+/*
+ * Macros for use in assembly language code
+ */
+
+#define CP0_MVPCONTROL		$0, 1
+#define CP0_MVPCONF0		$0, 2
+#define CP0_MVPCONF1		$0, 3
+#define CP0_VPECONTROL		$1, 1
+#define CP0_VPECONF0		$1, 2
+#define CP0_VPECONF1		$1, 3
+#define CP0_YQMASK		$1, 4
+#define CP0_VPESCHEDULE	$1, 5
+#define CP0_VPESCHEFBK		$1, 6
+#define CP0_TCSTATUS		$2, 1
+#define CP0_TCBIND		$2, 2
+#define CP0_TCRESTART		$2, 3
+#define CP0_TCHALT		$2, 4
+#define CP0_TCCONTEXT		$2, 5
+#define CP0_TCSCHEDULE		$2, 6
+#define CP0_TCSCHEFBK		$2, 7
+#define CP0_SRSCONF0		$6, 1
+#define CP0_SRSCONF1		$6, 2
+#define CP0_SRSCONF2		$6, 3
+#define CP0_SRSCONF3		$6, 4
+#define CP0_SRSCONF4		$6, 5
+
+#endif
+
+/* MVPControl fields */
+#define MVPCONTROL_EVP		(_ULCAST_(1))
+
+#define MVPCONTROL_VPC_SHIFT	1
+#define MVPCONTROL_VPC		(_ULCAST_(1) << MVPCONTROL_VPC_SHIFT)
+
+#define MVPCONTROL_STLB_SHIFT	2
+#define MVPCONTROL_STLB		(_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+
+
+/* MVPConf0 fields */
+#define MVPCONF0_PTC_SHIFT	0
+#define MVPCONF0_PTC		( _ULCAST_(0xff))
+#define MVPCONF0_PVPE_SHIFT	10
+#define MVPCONF0_PVPE		( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT)
+#define MVPCONF0_TCA_SHIFT	15
+#define MVPCONF0_TCA		( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+#define MVPCONF0_PTLBE_SHIFT	16
+#define MVPCONF0_PTLBE		(_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
+#define MVPCONF0_TLBS_SHIFT	29
+#define MVPCONF0_TLBS		(_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+#define MVPCONF0_M_SHIFT	31
+#define MVPCONF0_M		(_ULCAST_(0x1) << MVPCONF0_M_SHIFT)
+
+
+/* config3 fields */
+#define CONFIG3_MT_SHIFT	2
+#define CONFIG3_MT		(_ULCAST_(1) << CONFIG3_MT_SHIFT)
+
+
+/* VPEControl fields (per VPE) */
+#define VPECONTROL_TARGTC	(_ULCAST_(0xff))
+
+#define VPECONTROL_TE_SHIFT	15
+#define VPECONTROL_TE		(_ULCAST_(1) << VPECONTROL_TE_SHIFT)
+#define VPECONTROL_EXCPT_SHIFT	16
+#define VPECONTROL_EXCPT	(_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT)
+
+/* Thread Exception Codes for EXCPT field */
+#define THREX_TU		0
+#define THREX_TO		1
+#define THREX_IYQ		2
+#define THREX_GSX		3
+#define THREX_YSCH		4
+#define THREX_GSSCH		5
+
+#define VPECONTROL_GSI_SHIFT	20
+#define VPECONTROL_GSI		(_ULCAST_(1) << VPECONTROL_GSI_SHIFT)
+#define VPECONTROL_YSI_SHIFT	21
+#define VPECONTROL_YSI		(_ULCAST_(1) << VPECONTROL_YSI_SHIFT)
+
+/* VPEConf0 fields (per VPE) */
+#define VPECONF0_VPA_SHIFT	0
+#define VPECONF0_VPA		(_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+#define VPECONF0_MVP_SHIFT	1
+#define VPECONF0_MVP		(_ULCAST_(1) << VPECONF0_MVP_SHIFT)
+#define VPECONF0_XTC_SHIFT	21
+#define VPECONF0_XTC		(_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+
+/* TCStatus fields (per TC) */
+#define TCSTATUS_TASID		(_ULCAST_(0xff))
+#define TCSTATUS_IXMT_SHIFT	10
+#define TCSTATUS_IXMT		(_ULCAST_(1) << TCSTATUS_IXMT_SHIFT)
+#define TCSTATUS_TKSU_SHIFT	11
+#define TCSTATUS_TKSU		(_ULCAST_(3) << TCSTATUS_TKSU_SHIFT)
+#define TCSTATUS_A_SHIFT	13
+#define TCSTATUS_A		(_ULCAST_(1) << TCSTATUS_A_SHIFT)
+#define TCSTATUS_DA_SHIFT	15
+#define TCSTATUS_DA		(_ULCAST_(1) << TCSTATUS_DA_SHIFT)
+#define TCSTATUS_DT_SHIFT	20
+#define TCSTATUS_DT		(_ULCAST_(1) << TCSTATUS_DT_SHIFT)
+#define TCSTATUS_TDS_SHIFT	21
+#define TCSTATUS_TDS		(_ULCAST_(1) << TCSTATUS_TDS_SHIFT)
+#define TCSTATUS_TSST_SHIFT	22
+#define TCSTATUS_TSST		(_ULCAST_(1) << TCSTATUS_TSST_SHIFT)
+#define TCSTATUS_RNST_SHIFT	23
+#define TCSTATUS_RNST		(_ULCAST_(3) << TCSTATUS_RNST_SHIFT)
+/* Codes for RNST */
+#define TC_RUNNING		0
+#define TC_WAITING		1
+#define TC_YIELDING		2
+#define TC_GATED		3
+
+#define TCSTATUS_TMX_SHIFT	27
+#define TCSTATUS_TMX		(_ULCAST_(1) << TCSTATUS_TMX_SHIFT)
+/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */
+
+/* TCBind */
+#define TCBIND_CURVPE_SHIFT	0
+#define TCBIND_CURVPE		(_ULCAST_(0xf))
+
+#define TCBIND_CURTC_SHIFT	21
+
+#define TCBIND_CURTC		(_ULCAST_(0xff) << TCBIND_CURTC_SHIFT)
+
+/* TCHalt */
+#define TCHALT_H		(_ULCAST_(1))
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int dvpe(void)
+{
+	int res = 0;
+
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+	"	.set	mips32r2					\n"
+	"	.word	0x41610001		# dvpe $1		\n"
+	"	move	%0, $1						\n"
+	"	ehb							\n"
+	"	.set	pop						\n"
+	: "=r" (res));
+
+	instruction_hazard();
+
+	return res;
+}
+
+static inline void __raw_evpe(void)
+{
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+	"	.set	mips32r2					\n"
+	"	.word	0x41600021		# evpe			\n"
+	"	ehb							\n"
+	"	.set	pop						\n");
+}
+
+/* Enable virtual processor execution if previous suggested it should be.
+   EVPE_ENABLE to force */
+
+#define EVPE_ENABLE MVPCONTROL_EVP
+
+static inline void evpe(int previous)
+{
+	if ((previous & MVPCONTROL_EVP))
+		__raw_evpe();
+}
+
+static inline unsigned int dmt(void)
+{
+	int res;
+
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	mips32r2					\n"
+	"	.set	noat						\n"
+	"	.word	0x41610BC1			# dmt $1	\n"
+	"	ehb							\n"
+	"	move	%0, $1						\n"
+	"	.set	pop						\n"
+	: "=r" (res));
+
+	instruction_hazard();
+
+	return res;
+}
+
+static inline void __raw_emt(void)
+{
+	__asm__ __volatile__(
+	"	.set	noreorder					\n"
+	"	.set	mips32r2					\n"
+	"	.word	0x41600be1			# emt		\n"
+	"	ehb							\n"
+	"	.set	mips0						\n"
+	"	.set	reorder");
+}
+
+/* enable multi-threaded execution if previous suggested it should be.
+   EMT_ENABLE to force */
+
+#define EMT_ENABLE VPECONTROL_TE
+
+static inline void emt(int previous)
+{
+	if ((previous & EMT_ENABLE))
+		__raw_emt();
+}
+
+static inline void ehb(void)
+{
+	__asm__ __volatile__(
+	"	.set	mips32r2				\n"
+	"	ehb						\n"
+	"	.set	mips0					\n");
+}
+
+#define mftc0(rt,sel)							\
+({									\
+	 unsigned long  __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	mips32r2				\n"	\
+	"	.set	noat					\n"	\
+	"	# mftc0	$1, $" #rt ", " #sel "			\n"	\
+	"	.word	0x41000800 | (" #rt " << 16) | " #sel "	\n"	\
+	"	move	%0, $1					\n"	\
+	"	.set	pop					\n"	\
+	: "=r" (__res));						\
+									\
+	__res;								\
+})
+
+#define mftgpr(rt)							\
+({									\
+	unsigned long __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.set	mips32r2				\n"	\
+	"	# mftgpr $1," #rt "				\n"	\
+	"	.word	0x41000820 | (" #rt " << 16)		\n"	\
+	"	move	%0, $1					\n"	\
+	"	.set	pop					\n"	\
+	: "=r" (__res));						\
+									\
+	__res;								\
+})
+
+#define mftr(rt, u, sel)							\
+({									\
+	unsigned long __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	mftr	%0, " #rt ", " #u ", " #sel "		\n"	\
+	: "=r" (__res));						\
+									\
+	__res;								\
+})
+
+#define mttgpr(rd,v)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	mips32r2				\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mttgpr $1, " #rd "				\n"	\
+	"	.word	0x41810020 | (" #rd " << 11)		\n"	\
+	"	.set	pop					\n"	\
+	: : "r" (v));							\
+} while (0)
+
+#define mttc0(rd, sel, v)							\
+({									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	mips32r2				\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mttc0 %0," #rd ", " #sel "			\n"	\
+	"	.word	0x41810000 | (" #rd " << 11) | " #sel "	\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (v));							\
+})
+
+
+#define mttr(rd, u, sel, v)						\
+({									\
+	__asm__ __volatile__(						\
+	"mttr	%0," #rd ", " #u ", " #sel				\
+	: : "r" (v));							\
+})
+
+
+#define settc(tc)							\
+do {									\
+	write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \
+	ehb();								\
+} while (0)
+
+
+/* you *must* set the target tc (settc) before trying to use these */
+#define read_vpe_c0_vpecontrol()	mftc0(1, 1)
+#define write_vpe_c0_vpecontrol(val)	mttc0(1, 1, val)
+#define read_vpe_c0_vpeconf0()		mftc0(1, 2)
+#define write_vpe_c0_vpeconf0(val)	mttc0(1, 2, val)
+#define read_vpe_c0_count()		mftc0(9, 0)
+#define write_vpe_c0_count(val)		mttc0(9, 0, val)
+#define read_vpe_c0_status()		mftc0(12, 0)
+#define write_vpe_c0_status(val)	mttc0(12, 0, val)
+#define read_vpe_c0_cause()		mftc0(13, 0)
+#define write_vpe_c0_cause(val)		mttc0(13, 0, val)
+#define read_vpe_c0_config()		mftc0(16, 0)
+#define write_vpe_c0_config(val)	mttc0(16, 0, val)
+#define read_vpe_c0_config1()		mftc0(16, 1)
+#define write_vpe_c0_config1(val)	mttc0(16, 1, val)
+#define read_vpe_c0_config7()		mftc0(16, 7)
+#define write_vpe_c0_config7(val)	mttc0(16, 7, val)
+#define read_vpe_c0_ebase()		mftc0(15, 1)
+#define write_vpe_c0_ebase(val)		mttc0(15, 1, val)
+#define write_vpe_c0_compare(val)	mttc0(11, 0, val)
+#define read_vpe_c0_badvaddr()		mftc0(8, 0)
+#define read_vpe_c0_epc()		mftc0(14, 0)
+#define write_vpe_c0_epc(val)		mttc0(14, 0, val)
+
+
+/* TC */
+#define read_tc_c0_tcstatus()		mftc0(2, 1)
+#define write_tc_c0_tcstatus(val)	mttc0(2, 1, val)
+#define read_tc_c0_tcbind()		mftc0(2, 2)
+#define write_tc_c0_tcbind(val)		mttc0(2, 2, val)
+#define read_tc_c0_tcrestart()		mftc0(2, 3)
+#define write_tc_c0_tcrestart(val)	mttc0(2, 3, val)
+#define read_tc_c0_tchalt()		mftc0(2, 4)
+#define write_tc_c0_tchalt(val)		mttc0(2, 4, val)
+#define read_tc_c0_tccontext()		mftc0(2, 5)
+#define write_tc_c0_tccontext(val)	mttc0(2, 5, val)
+
+/* GPR */
+#define read_tc_gpr_sp()		mftgpr(29)
+#define write_tc_gpr_sp(val)		mttgpr(29, val)
+#define read_tc_gpr_gp()		mftgpr(28)
+#define write_tc_gpr_gp(val)		mttgpr(28, val)
+
+__BUILD_SET_C0(mvpcontrol)
+
+#endif /* Not __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/mipsprom.h b/arch/mips/include/asm/mipsprom.h
new file mode 100644
index 0000000..146d41b
--- /dev/null
+++ b/arch/mips/include/asm/mipsprom.h
@@ -0,0 +1,76 @@
+#ifndef __ASM_MIPS_PROM_H
+#define __ASM_MIPS_PROM_H
+
+#define PROM_RESET		0
+#define PROM_EXEC		1
+#define PROM_RESTART		2
+#define PROM_REINIT		3
+#define PROM_REBOOT		4
+#define PROM_AUTOBOOT		5
+#define PROM_OPEN		6
+#define PROM_READ		7
+#define PROM_WRITE		8
+#define PROM_IOCTL		9
+#define PROM_CLOSE		10
+#define PROM_GETCHAR		11
+#define PROM_PUTCHAR		12
+#define PROM_SHOWCHAR		13	/* XXX */
+#define PROM_GETS		14	/* XXX */
+#define PROM_PUTS		15	/* XXX */
+#define PROM_PRINTF		16	/* XXX */
+
+/* What are these for? */
+#define PROM_INITPROTO		17	/* XXX */
+#define PROM_PROTOENABLE	18	/* XXX */
+#define PROM_PROTODISABLE	19	/* XXX */
+#define PROM_GETPKT		20	/* XXX */
+#define PROM_PUTPKT		21	/* XXX */
+
+/* More PROM shit.  Probably has to do with VME RMW cycles??? */
+#define PROM_ORW_RMW		22	/* XXX */
+#define PROM_ORH_RMW		23	/* XXX */
+#define PROM_ORB_RMW		24	/* XXX */
+#define PROM_ANDW_RMW		25	/* XXX */
+#define PROM_ANDH_RMW		26	/* XXX */
+#define PROM_ANDB_RMW		27	/* XXX */
+
+/* Cache handling stuff */
+#define PROM_FLUSHCACHE		28	/* XXX */
+#define PROM_CLEARCACHE		29	/* XXX */
+
+/* Libc alike stuff */
+#define PROM_SETJMP		30	/* XXX */
+#define PROM_LONGJMP		31	/* XXX */
+#define PROM_BEVUTLB		32	/* XXX */
+#define PROM_GETENV		33	/* XXX */
+#define PROM_SETENV		34	/* XXX */
+#define PROM_ATOB		35	/* XXX */
+#define PROM_STRCMP		36	/* XXX */
+#define PROM_STRLEN		37	/* XXX */
+#define PROM_STRCPY		38	/* XXX */
+#define PROM_STRCAT		39	/* XXX */
+
+/* Misc stuff */
+#define PROM_PARSER		40	/* XXX */
+#define PROM_RANGE		41	/* XXX */
+#define PROM_ARGVIZE		42	/* XXX */
+#define PROM_HELP		43	/* XXX */
+
+/* Entry points for some PROM commands */
+#define PROM_DUMPCMD		44	/* XXX */
+#define PROM_SETENVCMD		45	/* XXX */
+#define PROM_UNSETENVCMD	46	/* XXX */
+#define PROM_PRINTENVCMD	47	/* XXX */
+#define PROM_BEVEXCEPT		48	/* XXX */
+#define PROM_ENABLECMD		49	/* XXX */
+#define PROM_DISABLECMD		50	/* XXX */
+
+#define PROM_CLEARNOFAULT	51	/* XXX */
+#define PROM_NOTIMPLEMENT	52	/* XXX */
+
+#define PROM_NV_GET		53	/* XXX */
+#define PROM_NV_SET		54	/* XXX */
+
+extern char *prom_getenv(char *);
+
+#endif /* __ASM_MIPS_PROM_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
new file mode 100644
index 0000000..9798660
--- /dev/null
+++ b/arch/mips/include/asm/mipsregs.h
@@ -0,0 +1,1526 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Modified for further R[236]000 support by Paul M. Antoine, 1996.
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
+ */
+#ifndef _ASM_MIPSREGS_H
+#define _ASM_MIPSREGS_H
+
+#include <linux/linkage.h>
+#include <asm/hazards.h>
+#include <asm/war.h>
+
+/*
+ * The following macros are especially useful for __asm__
+ * inline assembler.
+ */
+#ifndef __STR
+#define __STR(x) #x
+#endif
+#ifndef STR
+#define STR(x) __STR(x)
+#endif
+
+/*
+ *  Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ULCAST_
+#else
+#define _ULCAST_ (unsigned long)
+#endif
+
+/*
+ * Coprocessor 0 register names
+ */
+#define CP0_INDEX $0
+#define CP0_RANDOM $1
+#define CP0_ENTRYLO0 $2
+#define CP0_ENTRYLO1 $3
+#define CP0_CONF $3
+#define CP0_CONTEXT $4
+#define CP0_PAGEMASK $5
+#define CP0_WIRED $6
+#define CP0_INFO $7
+#define CP0_BADVADDR $8
+#define CP0_COUNT $9
+#define CP0_ENTRYHI $10
+#define CP0_COMPARE $11
+#define CP0_STATUS $12
+#define CP0_CAUSE $13
+#define CP0_EPC $14
+#define CP0_PRID $15
+#define CP0_CONFIG $16
+#define CP0_LLADDR $17
+#define CP0_WATCHLO $18
+#define CP0_WATCHHI $19
+#define CP0_XCONTEXT $20
+#define CP0_FRAMEMASK $21
+#define CP0_DIAGNOSTIC $22
+#define CP0_DEBUG $23
+#define CP0_DEPC $24
+#define CP0_PERFORMANCE $25
+#define CP0_ECC $26
+#define CP0_CACHEERR $27
+#define CP0_TAGLO $28
+#define CP0_TAGHI $29
+#define CP0_ERROREPC $30
+#define CP0_DESAVE $31
+
+/*
+ * R4640/R4650 cp0 register names.  These registers are listed
+ * here only for completeness; without MMU these CPUs are not useable
+ * by Linux.  A future ELKS port might take make Linux run on them
+ * though ...
+ */
+#define CP0_IBASE $0
+#define CP0_IBOUND $1
+#define CP0_DBASE $2
+#define CP0_DBOUND $3
+#define CP0_CALG $17
+#define CP0_IWATCH $18
+#define CP0_DWATCH $19
+
+/*
+ * Coprocessor 0 Set 1 register names
+ */
+#define CP0_S1_DERRADDR0  $26
+#define CP0_S1_DERRADDR1  $27
+#define CP0_S1_INTCONTROL $20
+
+/*
+ * Coprocessor 0 Set 2 register names
+ */
+#define CP0_S2_SRSCTL	  $12	/* MIPSR2 */
+
+/*
+ * Coprocessor 0 Set 3 register names
+ */
+#define CP0_S3_SRSMAP	  $12	/* MIPSR2 */
+
+/*
+ *  TX39 Series
+ */
+#define CP0_TX39_CACHE	$7
+
+/*
+ * Coprocessor 1 (FPU) register names
+ */
+#define CP1_REVISION   $0
+#define CP1_STATUS     $31
+
+/*
+ * FPU Status Register Values
+ */
+/*
+ * Status Register Values
+ */
+
+#define FPU_CSR_FLUSH   0x01000000      /* flush denormalised results to 0 */
+#define FPU_CSR_COND    0x00800000      /* $fcc0 */
+#define FPU_CSR_COND0   0x00800000      /* $fcc0 */
+#define FPU_CSR_COND1   0x02000000      /* $fcc1 */
+#define FPU_CSR_COND2   0x04000000      /* $fcc2 */
+#define FPU_CSR_COND3   0x08000000      /* $fcc3 */
+#define FPU_CSR_COND4   0x10000000      /* $fcc4 */
+#define FPU_CSR_COND5   0x20000000      /* $fcc5 */
+#define FPU_CSR_COND6   0x40000000      /* $fcc6 */
+#define FPU_CSR_COND7   0x80000000      /* $fcc7 */
+
+/*
+ * X the exception cause indicator
+ * E the exception enable
+ * S the sticky/flag bit
+*/
+#define FPU_CSR_ALL_X   0x0003f000
+#define FPU_CSR_UNI_X   0x00020000
+#define FPU_CSR_INV_X   0x00010000
+#define FPU_CSR_DIV_X   0x00008000
+#define FPU_CSR_OVF_X   0x00004000
+#define FPU_CSR_UDF_X   0x00002000
+#define FPU_CSR_INE_X   0x00001000
+
+#define FPU_CSR_ALL_E   0x00000f80
+#define FPU_CSR_INV_E   0x00000800
+#define FPU_CSR_DIV_E   0x00000400
+#define FPU_CSR_OVF_E   0x00000200
+#define FPU_CSR_UDF_E   0x00000100
+#define FPU_CSR_INE_E   0x00000080
+
+#define FPU_CSR_ALL_S   0x0000007c
+#define FPU_CSR_INV_S   0x00000040
+#define FPU_CSR_DIV_S   0x00000020
+#define FPU_CSR_OVF_S   0x00000010
+#define FPU_CSR_UDF_S   0x00000008
+#define FPU_CSR_INE_S   0x00000004
+
+/* rounding mode */
+#define FPU_CSR_RN      0x0     /* nearest */
+#define FPU_CSR_RZ      0x1     /* towards zero */
+#define FPU_CSR_RU      0x2     /* towards +Infinity */
+#define FPU_CSR_RD      0x3     /* towards -Infinity */
+
+
+/*
+ * Values for PageMask register
+ */
+#ifdef CONFIG_CPU_VR41XX
+
+/* Why doesn't stupidity hurt ... */
+
+#define PM_1K		0x00000000
+#define PM_4K		0x00001800
+#define PM_16K		0x00007800
+#define PM_64K		0x0001f800
+#define PM_256K		0x0007f800
+
+#else
+
+#define PM_4K		0x00000000
+#define PM_16K		0x00006000
+#define PM_64K		0x0001e000
+#define PM_256K		0x0007e000
+#define PM_1M		0x001fe000
+#define PM_4M		0x007fe000
+#define PM_16M		0x01ffe000
+#define PM_64M		0x07ffe000
+#define PM_256M		0x1fffe000
+
+#endif
+
+/*
+ * Default page size for a given kernel configuration
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PM_DEFAULT_MASK	PM_4K
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+#define PM_DEFAULT_MASK	PM_16K
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+#define PM_DEFAULT_MASK	PM_64K
+#else
+#error Bad page size configuration!
+#endif
+
+
+/*
+ * Values used for computation of new tlb entries
+ */
+#define PL_4K		12
+#define PL_16K		14
+#define PL_64K		16
+#define PL_256K		18
+#define PL_1M		20
+#define PL_4M		22
+#define PL_16M		24
+#define PL_64M		26
+#define PL_256M		28
+
+/*
+ * R4x00 interrupt enable / cause bits
+ */
+#define IE_SW0          (_ULCAST_(1) <<  8)
+#define IE_SW1          (_ULCAST_(1) <<  9)
+#define IE_IRQ0         (_ULCAST_(1) << 10)
+#define IE_IRQ1         (_ULCAST_(1) << 11)
+#define IE_IRQ2         (_ULCAST_(1) << 12)
+#define IE_IRQ3         (_ULCAST_(1) << 13)
+#define IE_IRQ4         (_ULCAST_(1) << 14)
+#define IE_IRQ5         (_ULCAST_(1) << 15)
+
+/*
+ * R4x00 interrupt cause bits
+ */
+#define C_SW0           (_ULCAST_(1) <<  8)
+#define C_SW1           (_ULCAST_(1) <<  9)
+#define C_IRQ0          (_ULCAST_(1) << 10)
+#define C_IRQ1          (_ULCAST_(1) << 11)
+#define C_IRQ2          (_ULCAST_(1) << 12)
+#define C_IRQ3          (_ULCAST_(1) << 13)
+#define C_IRQ4          (_ULCAST_(1) << 14)
+#define C_IRQ5          (_ULCAST_(1) << 15)
+
+/*
+ * Bitfields in the R4xx0 cp0 status register
+ */
+#define ST0_IE			0x00000001
+#define ST0_EXL			0x00000002
+#define ST0_ERL			0x00000004
+#define ST0_KSU			0x00000018
+#  define KSU_USER		0x00000010
+#  define KSU_SUPERVISOR	0x00000008
+#  define KSU_KERNEL		0x00000000
+#define ST0_UX			0x00000020
+#define ST0_SX			0x00000040
+#define ST0_KX 			0x00000080
+#define ST0_DE			0x00010000
+#define ST0_CE			0x00020000
+
+/*
+ * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
+ * cacheops in userspace.  This bit exists only on RM7000 and RM9000
+ * processors.
+ */
+#define ST0_CO			0x08000000
+
+/*
+ * Bitfields in the R[23]000 cp0 status register.
+ */
+#define ST0_IEC                 0x00000001
+#define ST0_KUC			0x00000002
+#define ST0_IEP			0x00000004
+#define ST0_KUP			0x00000008
+#define ST0_IEO			0x00000010
+#define ST0_KUO			0x00000020
+/* bits 6 & 7 are reserved on R[23]000 */
+#define ST0_ISC			0x00010000
+#define ST0_SWC			0x00020000
+#define ST0_CM			0x00080000
+
+/*
+ * Bits specific to the R4640/R4650
+ */
+#define ST0_UM			(_ULCAST_(1) <<  4)
+#define ST0_IL			(_ULCAST_(1) << 23)
+#define ST0_DL			(_ULCAST_(1) << 24)
+
+/*
+ * Enable the MIPS MDMX and DSP ASEs
+ */
+#define ST0_MX			0x01000000
+
+/*
+ * Bitfields in the TX39 family CP0 Configuration Register 3
+ */
+#define TX39_CONF_ICS_SHIFT	19
+#define TX39_CONF_ICS_MASK	0x00380000
+#define TX39_CONF_ICS_1KB 	0x00000000
+#define TX39_CONF_ICS_2KB 	0x00080000
+#define TX39_CONF_ICS_4KB 	0x00100000
+#define TX39_CONF_ICS_8KB 	0x00180000
+#define TX39_CONF_ICS_16KB 	0x00200000
+
+#define TX39_CONF_DCS_SHIFT	16
+#define TX39_CONF_DCS_MASK	0x00070000
+#define TX39_CONF_DCS_1KB 	0x00000000
+#define TX39_CONF_DCS_2KB 	0x00010000
+#define TX39_CONF_DCS_4KB 	0x00020000
+#define TX39_CONF_DCS_8KB 	0x00030000
+#define TX39_CONF_DCS_16KB 	0x00040000
+
+#define TX39_CONF_CWFON 	0x00004000
+#define TX39_CONF_WBON  	0x00002000
+#define TX39_CONF_RF_SHIFT	10
+#define TX39_CONF_RF_MASK	0x00000c00
+#define TX39_CONF_DOZE		0x00000200
+#define TX39_CONF_HALT		0x00000100
+#define TX39_CONF_LOCK		0x00000080
+#define TX39_CONF_ICE		0x00000020
+#define TX39_CONF_DCE		0x00000010
+#define TX39_CONF_IRSIZE_SHIFT	2
+#define TX39_CONF_IRSIZE_MASK	0x0000000c
+#define TX39_CONF_DRSIZE_SHIFT	0
+#define TX39_CONF_DRSIZE_MASK	0x00000003
+
+/*
+ * Status register bits available in all MIPS CPUs.
+ */
+#define ST0_IM			0x0000ff00
+#define  STATUSB_IP0		8
+#define  STATUSF_IP0		(_ULCAST_(1) <<  8)
+#define  STATUSB_IP1		9
+#define  STATUSF_IP1		(_ULCAST_(1) <<  9)
+#define  STATUSB_IP2		10
+#define  STATUSF_IP2		(_ULCAST_(1) << 10)
+#define  STATUSB_IP3		11
+#define  STATUSF_IP3		(_ULCAST_(1) << 11)
+#define  STATUSB_IP4		12
+#define  STATUSF_IP4		(_ULCAST_(1) << 12)
+#define  STATUSB_IP5		13
+#define  STATUSF_IP5		(_ULCAST_(1) << 13)
+#define  STATUSB_IP6		14
+#define  STATUSF_IP6		(_ULCAST_(1) << 14)
+#define  STATUSB_IP7		15
+#define  STATUSF_IP7		(_ULCAST_(1) << 15)
+#define  STATUSB_IP8		0
+#define  STATUSF_IP8		(_ULCAST_(1) <<  0)
+#define  STATUSB_IP9		1
+#define  STATUSF_IP9		(_ULCAST_(1) <<  1)
+#define  STATUSB_IP10		2
+#define  STATUSF_IP10		(_ULCAST_(1) <<  2)
+#define  STATUSB_IP11		3
+#define  STATUSF_IP11		(_ULCAST_(1) <<  3)
+#define  STATUSB_IP12		4
+#define  STATUSF_IP12		(_ULCAST_(1) <<  4)
+#define  STATUSB_IP13		5
+#define  STATUSF_IP13		(_ULCAST_(1) <<  5)
+#define  STATUSB_IP14		6
+#define  STATUSF_IP14		(_ULCAST_(1) <<  6)
+#define  STATUSB_IP15		7
+#define  STATUSF_IP15		(_ULCAST_(1) <<  7)
+#define ST0_CH			0x00040000
+#define ST0_SR			0x00100000
+#define ST0_TS			0x00200000
+#define ST0_BEV			0x00400000
+#define ST0_RE			0x02000000
+#define ST0_FR			0x04000000
+#define ST0_CU			0xf0000000
+#define ST0_CU0			0x10000000
+#define ST0_CU1			0x20000000
+#define ST0_CU2			0x40000000
+#define ST0_CU3			0x80000000
+#define ST0_XX			0x80000000	/* MIPS IV naming */
+
+/*
+ * Bitfields and bit numbers in the coprocessor 0 cause register.
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define  CAUSEB_EXCCODE		2
+#define  CAUSEF_EXCCODE		(_ULCAST_(31)  <<  2)
+#define  CAUSEB_IP		8
+#define  CAUSEF_IP		(_ULCAST_(255) <<  8)
+#define  CAUSEB_IP0		8
+#define  CAUSEF_IP0		(_ULCAST_(1)   <<  8)
+#define  CAUSEB_IP1		9
+#define  CAUSEF_IP1		(_ULCAST_(1)   <<  9)
+#define  CAUSEB_IP2		10
+#define  CAUSEF_IP2		(_ULCAST_(1)   << 10)
+#define  CAUSEB_IP3		11
+#define  CAUSEF_IP3		(_ULCAST_(1)   << 11)
+#define  CAUSEB_IP4		12
+#define  CAUSEF_IP4		(_ULCAST_(1)   << 12)
+#define  CAUSEB_IP5		13
+#define  CAUSEF_IP5		(_ULCAST_(1)   << 13)
+#define  CAUSEB_IP6		14
+#define  CAUSEF_IP6		(_ULCAST_(1)   << 14)
+#define  CAUSEB_IP7		15
+#define  CAUSEF_IP7		(_ULCAST_(1)   << 15)
+#define  CAUSEB_IV		23
+#define  CAUSEF_IV		(_ULCAST_(1)   << 23)
+#define  CAUSEB_CE		28
+#define  CAUSEF_CE		(_ULCAST_(3)   << 28)
+#define  CAUSEB_BD		31
+#define  CAUSEF_BD		(_ULCAST_(1)   << 31)
+
+/*
+ * Bits in the coprocessor 0 config register.
+ */
+/* Generic bits.  */
+#define CONF_CM_CACHABLE_NO_WA		0
+#define CONF_CM_CACHABLE_WA		1
+#define CONF_CM_UNCACHED		2
+#define CONF_CM_CACHABLE_NONCOHERENT	3
+#define CONF_CM_CACHABLE_CE		4
+#define CONF_CM_CACHABLE_COW		5
+#define CONF_CM_CACHABLE_CUW		6
+#define CONF_CM_CACHABLE_ACCELERATED	7
+#define CONF_CM_CMASK			7
+#define CONF_BE			(_ULCAST_(1) << 15)
+
+/* Bits common to various processors.  */
+#define CONF_CU			(_ULCAST_(1) <<  3)
+#define CONF_DB			(_ULCAST_(1) <<  4)
+#define CONF_IB			(_ULCAST_(1) <<  5)
+#define CONF_DC			(_ULCAST_(7) <<  6)
+#define CONF_IC			(_ULCAST_(7) <<  9)
+#define CONF_EB			(_ULCAST_(1) << 13)
+#define CONF_EM			(_ULCAST_(1) << 14)
+#define CONF_SM			(_ULCAST_(1) << 16)
+#define CONF_SC			(_ULCAST_(1) << 17)
+#define CONF_EW			(_ULCAST_(3) << 18)
+#define CONF_EP			(_ULCAST_(15)<< 24)
+#define CONF_EC			(_ULCAST_(7) << 28)
+#define CONF_CM			(_ULCAST_(1) << 31)
+
+/* Bits specific to the R4xx0.  */
+#define R4K_CONF_SW		(_ULCAST_(1) << 20)
+#define R4K_CONF_SS		(_ULCAST_(1) << 21)
+#define R4K_CONF_SB		(_ULCAST_(3) << 22)
+
+/* Bits specific to the R5000.  */
+#define R5K_CONF_SE		(_ULCAST_(1) << 12)
+#define R5K_CONF_SS		(_ULCAST_(3) << 20)
+
+/* Bits specific to the RM7000.  */
+#define RM7K_CONF_SE		(_ULCAST_(1) <<  3)
+#define RM7K_CONF_TE		(_ULCAST_(1) << 12)
+#define RM7K_CONF_CLK		(_ULCAST_(1) << 16)
+#define RM7K_CONF_TC		(_ULCAST_(1) << 17)
+#define RM7K_CONF_SI		(_ULCAST_(3) << 20)
+#define RM7K_CONF_SC		(_ULCAST_(1) << 31)
+
+/* Bits specific to the R10000.  */
+#define R10K_CONF_DN		(_ULCAST_(3) <<  3)
+#define R10K_CONF_CT		(_ULCAST_(1) <<  5)
+#define R10K_CONF_PE		(_ULCAST_(1) <<  6)
+#define R10K_CONF_PM		(_ULCAST_(3) <<  7)
+#define R10K_CONF_EC		(_ULCAST_(15)<<  9)
+#define R10K_CONF_SB		(_ULCAST_(1) << 13)
+#define R10K_CONF_SK		(_ULCAST_(1) << 14)
+#define R10K_CONF_SS		(_ULCAST_(7) << 16)
+#define R10K_CONF_SC		(_ULCAST_(7) << 19)
+#define R10K_CONF_DC		(_ULCAST_(7) << 26)
+#define R10K_CONF_IC		(_ULCAST_(7) << 29)
+
+/* Bits specific to the VR41xx.  */
+#define VR41_CONF_CS		(_ULCAST_(1) << 12)
+#define VR41_CONF_P4K		(_ULCAST_(1) << 13)
+#define VR41_CONF_BP		(_ULCAST_(1) << 16)
+#define VR41_CONF_M16		(_ULCAST_(1) << 20)
+#define VR41_CONF_AD		(_ULCAST_(1) << 23)
+
+/* Bits specific to the R30xx.  */
+#define R30XX_CONF_FDM		(_ULCAST_(1) << 19)
+#define R30XX_CONF_REV		(_ULCAST_(1) << 22)
+#define R30XX_CONF_AC		(_ULCAST_(1) << 23)
+#define R30XX_CONF_RF		(_ULCAST_(1) << 24)
+#define R30XX_CONF_HALT		(_ULCAST_(1) << 25)
+#define R30XX_CONF_FPINT	(_ULCAST_(7) << 26)
+#define R30XX_CONF_DBR		(_ULCAST_(1) << 29)
+#define R30XX_CONF_SB		(_ULCAST_(1) << 30)
+#define R30XX_CONF_LOCK		(_ULCAST_(1) << 31)
+
+/* Bits specific to the TX49.  */
+#define TX49_CONF_DC		(_ULCAST_(1) << 16)
+#define TX49_CONF_IC		(_ULCAST_(1) << 17)  /* conflict with CONF_SC */
+#define TX49_CONF_HALT		(_ULCAST_(1) << 18)
+#define TX49_CONF_CWFON		(_ULCAST_(1) << 27)
+
+/* Bits specific to the MIPS32/64 PRA.  */
+#define MIPS_CONF_MT		(_ULCAST_(7) <<  7)
+#define MIPS_CONF_AR		(_ULCAST_(7) << 10)
+#define MIPS_CONF_AT		(_ULCAST_(3) << 13)
+#define MIPS_CONF_M		(_ULCAST_(1) << 31)
+
+/*
+ * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
+ */
+#define MIPS_CONF1_FP		(_ULCAST_(1) <<  0)
+#define MIPS_CONF1_EP		(_ULCAST_(1) <<  1)
+#define MIPS_CONF1_CA		(_ULCAST_(1) <<  2)
+#define MIPS_CONF1_WR		(_ULCAST_(1) <<  3)
+#define MIPS_CONF1_PC		(_ULCAST_(1) <<  4)
+#define MIPS_CONF1_MD		(_ULCAST_(1) <<  5)
+#define MIPS_CONF1_C2		(_ULCAST_(1) <<  6)
+#define MIPS_CONF1_DA		(_ULCAST_(7) <<  7)
+#define MIPS_CONF1_DL		(_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS		(_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA		(_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL		(_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS		(_ULCAST_(7) << 22)
+#define MIPS_CONF1_TLBS		(_ULCAST_(63)<< 25)
+
+#define MIPS_CONF2_SA		(_ULCAST_(15)<<  0)
+#define MIPS_CONF2_SL		(_ULCAST_(15)<<  4)
+#define MIPS_CONF2_SS		(_ULCAST_(15)<<  8)
+#define MIPS_CONF2_SU		(_ULCAST_(15)<< 12)
+#define MIPS_CONF2_TA		(_ULCAST_(15)<< 16)
+#define MIPS_CONF2_TL		(_ULCAST_(15)<< 20)
+#define MIPS_CONF2_TS		(_ULCAST_(15)<< 24)
+#define MIPS_CONF2_TU		(_ULCAST_(7) << 28)
+
+#define MIPS_CONF3_TL		(_ULCAST_(1) <<  0)
+#define MIPS_CONF3_SM		(_ULCAST_(1) <<  1)
+#define MIPS_CONF3_MT		(_ULCAST_(1) <<  2)
+#define MIPS_CONF3_SP		(_ULCAST_(1) <<  4)
+#define MIPS_CONF3_VINT		(_ULCAST_(1) <<  5)
+#define MIPS_CONF3_VEIC		(_ULCAST_(1) <<  6)
+#define MIPS_CONF3_LPA		(_ULCAST_(1) <<  7)
+#define MIPS_CONF3_DSP		(_ULCAST_(1) << 10)
+#define MIPS_CONF3_ULRI		(_ULCAST_(1) << 13)
+
+#define MIPS_CONF7_WII		(_ULCAST_(1) << 31)
+
+#define MIPS_CONF7_RPS		(_ULCAST_(1) << 2)
+
+
+/*
+ * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
+ */
+#define MIPS_FPIR_S		(_ULCAST_(1) << 16)
+#define MIPS_FPIR_D		(_ULCAST_(1) << 17)
+#define MIPS_FPIR_PS		(_ULCAST_(1) << 18)
+#define MIPS_FPIR_3D		(_ULCAST_(1) << 19)
+#define MIPS_FPIR_W		(_ULCAST_(1) << 20)
+#define MIPS_FPIR_L		(_ULCAST_(1) << 21)
+#define MIPS_FPIR_F64		(_ULCAST_(1) << 22)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Functions to access the R10000 performance counters.  These are basically
+ * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
+ * performance counter number encoded into bits 1 ... 5 of the instruction.
+ * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware
+ * disassembler these will look like an access to sel 0 or 1.
+ */
+#define read_r10k_perf_cntr(counter)				\
+({								\
+	unsigned int __res;					\
+	__asm__ __volatile__(					\
+	"mfpc\t%0, %1"						\
+        : "=r" (__res)						\
+	: "i" (counter));					\
+								\
+        __res;							\
+})
+
+#define write_r10k_perf_cntr(counter,val)                       \
+do {								\
+	__asm__ __volatile__(					\
+	"mtpc\t%0, %1"						\
+	:							\
+	: "r" (val), "i" (counter));				\
+} while (0)
+
+#define read_r10k_perf_event(counter)				\
+({								\
+	unsigned int __res;					\
+	__asm__ __volatile__(					\
+	"mfps\t%0, %1"						\
+        : "=r" (__res)						\
+	: "i" (counter));					\
+								\
+        __res;							\
+})
+
+#define write_r10k_perf_cntl(counter,val)                       \
+do {								\
+	__asm__ __volatile__(					\
+	"mtps\t%0, %1"						\
+	:							\
+	: "r" (val), "i" (counter));				\
+} while (0)
+
+
+/*
+ * Macros to access the system control coprocessor
+ */
+
+#define __read_32bit_c0_register(source, sel)				\
+({ int __res;								\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			"mfc0\t%0, " #source "\n\t"			\
+			: "=r" (__res));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips32\n\t"				\
+			"mfc0\t%0, " #source ", " #sel "\n\t"		\
+			".set\tmips0\n\t"				\
+			: "=r" (__res));				\
+	__res;								\
+})
+
+#define __read_64bit_c0_register(source, sel)				\
+({ unsigned long long __res;						\
+	if (sizeof(unsigned long) == 4)					\
+		__res = __read_64bit_c0_split(source, sel);		\
+	else if (sel == 0)						\
+		__asm__ __volatile__(					\
+			".set\tmips3\n\t"				\
+			"dmfc0\t%0, " #source "\n\t"			\
+			".set\tmips0"					\
+			: "=r" (__res));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmfc0\t%0, " #source ", " #sel "\n\t"		\
+			".set\tmips0"					\
+			: "=r" (__res));				\
+	__res;								\
+})
+
+#define __write_32bit_c0_register(register, sel, value)			\
+do {									\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			"mtc0\t%z0, " #register "\n\t"			\
+			: : "Jr" ((unsigned int)(value)));		\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips32\n\t"				\
+			"mtc0\t%z0, " #register ", " #sel "\n\t"	\
+			".set\tmips0"					\
+			: : "Jr" ((unsigned int)(value)));		\
+} while (0)
+
+#define __write_64bit_c0_register(register, sel, value)			\
+do {									\
+	if (sizeof(unsigned long) == 4)					\
+		__write_64bit_c0_split(register, sel, value);		\
+	else if (sel == 0)						\
+		__asm__ __volatile__(					\
+			".set\tmips3\n\t"				\
+			"dmtc0\t%z0, " #register "\n\t"			\
+			".set\tmips0"					\
+			: : "Jr" (value));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmtc0\t%z0, " #register ", " #sel "\n\t"	\
+			".set\tmips0"					\
+			: : "Jr" (value));				\
+} while (0)
+
+#define __read_ulong_c0_register(reg, sel)				\
+	((sizeof(unsigned long) == 4) ?					\
+	(unsigned long) __read_32bit_c0_register(reg, sel) :		\
+	(unsigned long) __read_64bit_c0_register(reg, sel))
+
+#define __write_ulong_c0_register(reg, sel, val)			\
+do {									\
+	if (sizeof(unsigned long) == 4)					\
+		__write_32bit_c0_register(reg, sel, val);		\
+	else								\
+		__write_64bit_c0_register(reg, sel, val);		\
+} while (0)
+
+/*
+ * On RM7000/RM9000 these are uses to access cop0 set 1 registers
+ */
+#define __read_32bit_c0_ctrl_register(source)				\
+({ int __res;								\
+	__asm__ __volatile__(						\
+		"cfc0\t%0, " #source "\n\t"				\
+		: "=r" (__res));					\
+	__res;								\
+})
+
+#define __write_32bit_c0_ctrl_register(register, value)			\
+do {									\
+	__asm__ __volatile__(						\
+		"ctc0\t%z0, " #register "\n\t"				\
+		: : "Jr" ((unsigned int)(value)));			\
+} while (0)
+
+/*
+ * These versions are only needed for systems with more than 38 bits of
+ * physical address space running the 32-bit kernel.  That's none atm :-)
+ */
+#define __read_64bit_c0_split(source, sel)				\
+({									\
+	unsigned long long __val;					\
+	unsigned long __flags;						\
+									\
+	local_irq_save(__flags);					\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmfc0\t%M0, " #source "\n\t"			\
+			"dsll\t%L0, %M0, 32\n\t"			\
+			"dsrl\t%M0, %M0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			".set\tmips0"					\
+			: "=r" (__val));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmfc0\t%M0, " #source ", " #sel "\n\t"		\
+			"dsll\t%L0, %M0, 32\n\t"			\
+			"dsrl\t%M0, %M0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			".set\tmips0"					\
+			: "=r" (__val));				\
+	local_irq_restore(__flags);					\
+									\
+	__val;								\
+})
+
+#define __write_64bit_c0_split(source, sel, val)			\
+do {									\
+	unsigned long __flags;						\
+									\
+	local_irq_save(__flags);					\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dsll\t%L0, %L0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsll\t%M0, %M0, 32\n\t"			\
+			"or\t%L0, %L0, %M0\n\t"				\
+			"dmtc0\t%L0, " #source "\n\t"			\
+			".set\tmips0"					\
+			: : "r" (val));					\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dsll\t%L0, %L0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsll\t%M0, %M0, 32\n\t"			\
+			"or\t%L0, %L0, %M0\n\t"				\
+			"dmtc0\t%L0, " #source ", " #sel "\n\t"		\
+			".set\tmips0"					\
+			: : "r" (val));					\
+	local_irq_restore(__flags);					\
+} while (0)
+
+#define read_c0_index()		__read_32bit_c0_register($0, 0)
+#define write_c0_index(val)	__write_32bit_c0_register($0, 0, val)
+
+#define read_c0_random()	__read_32bit_c0_register($1, 0)
+#define write_c0_random(val)	__write_32bit_c0_register($1, 0, val)
+
+#define read_c0_entrylo0()	__read_ulong_c0_register($2, 0)
+#define write_c0_entrylo0(val)	__write_ulong_c0_register($2, 0, val)
+
+#define read_c0_entrylo1()	__read_ulong_c0_register($3, 0)
+#define write_c0_entrylo1(val)	__write_ulong_c0_register($3, 0, val)
+
+#define read_c0_conf()		__read_32bit_c0_register($3, 0)
+#define write_c0_conf(val)	__write_32bit_c0_register($3, 0, val)
+
+#define read_c0_context()	__read_ulong_c0_register($4, 0)
+#define write_c0_context(val)	__write_ulong_c0_register($4, 0, val)
+
+#define read_c0_userlocal()	__read_ulong_c0_register($4, 2)
+#define write_c0_userlocal(val)	__write_ulong_c0_register($4, 2, val)
+
+#define read_c0_pagemask()	__read_32bit_c0_register($5, 0)
+#define write_c0_pagemask(val)	__write_32bit_c0_register($5, 0, val)
+
+#define read_c0_wired()		__read_32bit_c0_register($6, 0)
+#define write_c0_wired(val)	__write_32bit_c0_register($6, 0, val)
+
+#define read_c0_info()		__read_32bit_c0_register($7, 0)
+
+#define read_c0_cache()		__read_32bit_c0_register($7, 0)	/* TX39xx */
+#define write_c0_cache(val)	__write_32bit_c0_register($7, 0, val)
+
+#define read_c0_badvaddr()	__read_ulong_c0_register($8, 0)
+#define write_c0_badvaddr(val)	__write_ulong_c0_register($8, 0, val)
+
+#define read_c0_count()		__read_32bit_c0_register($9, 0)
+#define write_c0_count(val)	__write_32bit_c0_register($9, 0, val)
+
+#define read_c0_count2()	__read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val)	__write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3()	__read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val)	__write_32bit_c0_register($9, 7, val)
+
+#define read_c0_entryhi()	__read_ulong_c0_register($10, 0)
+#define write_c0_entryhi(val)	__write_ulong_c0_register($10, 0, val)
+
+#define read_c0_compare()	__read_32bit_c0_register($11, 0)
+#define write_c0_compare(val)	__write_32bit_c0_register($11, 0, val)
+
+#define read_c0_compare2()	__read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val)	__write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3()	__read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val)	__write_32bit_c0_register($11, 7, val)
+
+#define read_c0_status()	__read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val)						\
+do {									\
+	__write_32bit_c0_register($12, 0, val);				\
+	__ehb();							\
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
+#define write_c0_status(val)	__write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#define read_c0_cause()		__read_32bit_c0_register($13, 0)
+#define write_c0_cause(val)	__write_32bit_c0_register($13, 0, val)
+
+#define read_c0_epc()		__read_ulong_c0_register($14, 0)
+#define write_c0_epc(val)	__write_ulong_c0_register($14, 0, val)
+
+#define read_c0_prid()		__read_32bit_c0_register($15, 0)
+
+#define read_c0_config()	__read_32bit_c0_register($16, 0)
+#define read_c0_config1()	__read_32bit_c0_register($16, 1)
+#define read_c0_config2()	__read_32bit_c0_register($16, 2)
+#define read_c0_config3()	__read_32bit_c0_register($16, 3)
+#define read_c0_config4()	__read_32bit_c0_register($16, 4)
+#define read_c0_config5()	__read_32bit_c0_register($16, 5)
+#define read_c0_config6()	__read_32bit_c0_register($16, 6)
+#define read_c0_config7()	__read_32bit_c0_register($16, 7)
+#define write_c0_config(val)	__write_32bit_c0_register($16, 0, val)
+#define write_c0_config1(val)	__write_32bit_c0_register($16, 1, val)
+#define write_c0_config2(val)	__write_32bit_c0_register($16, 2, val)
+#define write_c0_config3(val)	__write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val)	__write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val)	__write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val)	__write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val)	__write_32bit_c0_register($16, 7, val)
+
+/*
+ * The WatchLo register.  There may be upto 8 of them.
+ */
+#define read_c0_watchlo0()	__read_ulong_c0_register($18, 0)
+#define read_c0_watchlo1()	__read_ulong_c0_register($18, 1)
+#define read_c0_watchlo2()	__read_ulong_c0_register($18, 2)
+#define read_c0_watchlo3()	__read_ulong_c0_register($18, 3)
+#define read_c0_watchlo4()	__read_ulong_c0_register($18, 4)
+#define read_c0_watchlo5()	__read_ulong_c0_register($18, 5)
+#define read_c0_watchlo6()	__read_ulong_c0_register($18, 6)
+#define read_c0_watchlo7()	__read_ulong_c0_register($18, 7)
+#define write_c0_watchlo0(val)	__write_ulong_c0_register($18, 0, val)
+#define write_c0_watchlo1(val)	__write_ulong_c0_register($18, 1, val)
+#define write_c0_watchlo2(val)	__write_ulong_c0_register($18, 2, val)
+#define write_c0_watchlo3(val)	__write_ulong_c0_register($18, 3, val)
+#define write_c0_watchlo4(val)	__write_ulong_c0_register($18, 4, val)
+#define write_c0_watchlo5(val)	__write_ulong_c0_register($18, 5, val)
+#define write_c0_watchlo6(val)	__write_ulong_c0_register($18, 6, val)
+#define write_c0_watchlo7(val)	__write_ulong_c0_register($18, 7, val)
+
+/*
+ * The WatchHi register.  There may be upto 8 of them.
+ */
+#define read_c0_watchhi0()	__read_32bit_c0_register($19, 0)
+#define read_c0_watchhi1()	__read_32bit_c0_register($19, 1)
+#define read_c0_watchhi2()	__read_32bit_c0_register($19, 2)
+#define read_c0_watchhi3()	__read_32bit_c0_register($19, 3)
+#define read_c0_watchhi4()	__read_32bit_c0_register($19, 4)
+#define read_c0_watchhi5()	__read_32bit_c0_register($19, 5)
+#define read_c0_watchhi6()	__read_32bit_c0_register($19, 6)
+#define read_c0_watchhi7()	__read_32bit_c0_register($19, 7)
+
+#define write_c0_watchhi0(val)	__write_32bit_c0_register($19, 0, val)
+#define write_c0_watchhi1(val)	__write_32bit_c0_register($19, 1, val)
+#define write_c0_watchhi2(val)	__write_32bit_c0_register($19, 2, val)
+#define write_c0_watchhi3(val)	__write_32bit_c0_register($19, 3, val)
+#define write_c0_watchhi4(val)	__write_32bit_c0_register($19, 4, val)
+#define write_c0_watchhi5(val)	__write_32bit_c0_register($19, 5, val)
+#define write_c0_watchhi6(val)	__write_32bit_c0_register($19, 6, val)
+#define write_c0_watchhi7(val)	__write_32bit_c0_register($19, 7, val)
+
+#define read_c0_xcontext()	__read_ulong_c0_register($20, 0)
+#define write_c0_xcontext(val)	__write_ulong_c0_register($20, 0, val)
+
+#define read_c0_intcontrol()	__read_32bit_c0_ctrl_register($20)
+#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
+
+#define read_c0_framemask()	__read_32bit_c0_register($21, 0)
+#define write_c0_framemask(val)	__write_32bit_c0_register($21, 0, val)
+
+/* RM9000 PerfControl performance counter control register */
+#define read_c0_perfcontrol()	__read_32bit_c0_register($22, 0)
+#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag()		__read_32bit_c0_register($22, 0)
+#define write_c0_diag(val)	__write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag1()		__read_32bit_c0_register($22, 1)
+#define write_c0_diag1(val)	__write_32bit_c0_register($22, 1, val)
+
+#define read_c0_diag2()		__read_32bit_c0_register($22, 2)
+#define write_c0_diag2(val)	__write_32bit_c0_register($22, 2, val)
+
+#define read_c0_diag3()		__read_32bit_c0_register($22, 3)
+#define write_c0_diag3(val)	__write_32bit_c0_register($22, 3, val)
+
+#define read_c0_diag4()		__read_32bit_c0_register($22, 4)
+#define write_c0_diag4(val)	__write_32bit_c0_register($22, 4, val)
+
+#define read_c0_diag5()		__read_32bit_c0_register($22, 5)
+#define write_c0_diag5(val)	__write_32bit_c0_register($22, 5, val)
+
+#define read_c0_debug()		__read_32bit_c0_register($23, 0)
+#define write_c0_debug(val)	__write_32bit_c0_register($23, 0, val)
+
+#define read_c0_depc()		__read_ulong_c0_register($24, 0)
+#define write_c0_depc(val)	__write_ulong_c0_register($24, 0, val)
+
+/*
+ * MIPS32 / MIPS64 performance counters
+ */
+#define read_c0_perfctrl0()	__read_32bit_c0_register($25, 0)
+#define write_c0_perfctrl0(val)	__write_32bit_c0_register($25, 0, val)
+#define read_c0_perfcntr0()	__read_32bit_c0_register($25, 1)
+#define write_c0_perfcntr0(val)	__write_32bit_c0_register($25, 1, val)
+#define read_c0_perfctrl1()	__read_32bit_c0_register($25, 2)
+#define write_c0_perfctrl1(val)	__write_32bit_c0_register($25, 2, val)
+#define read_c0_perfcntr1()	__read_32bit_c0_register($25, 3)
+#define write_c0_perfcntr1(val)	__write_32bit_c0_register($25, 3, val)
+#define read_c0_perfctrl2()	__read_32bit_c0_register($25, 4)
+#define write_c0_perfctrl2(val)	__write_32bit_c0_register($25, 4, val)
+#define read_c0_perfcntr2()	__read_32bit_c0_register($25, 5)
+#define write_c0_perfcntr2(val)	__write_32bit_c0_register($25, 5, val)
+#define read_c0_perfctrl3()	__read_32bit_c0_register($25, 6)
+#define write_c0_perfctrl3(val)	__write_32bit_c0_register($25, 6, val)
+#define read_c0_perfcntr3()	__read_32bit_c0_register($25, 7)
+#define write_c0_perfcntr3(val)	__write_32bit_c0_register($25, 7, val)
+
+/* RM9000 PerfCount performance counter register */
+#define read_c0_perfcount()	__read_64bit_c0_register($25, 0)
+#define write_c0_perfcount(val)	__write_64bit_c0_register($25, 0, val)
+
+#define read_c0_ecc()		__read_32bit_c0_register($26, 0)
+#define write_c0_ecc(val)	__write_32bit_c0_register($26, 0, val)
+
+#define read_c0_derraddr0()	__read_ulong_c0_register($26, 1)
+#define write_c0_derraddr0(val)	__write_ulong_c0_register($26, 1, val)
+
+#define read_c0_cacheerr()	__read_32bit_c0_register($27, 0)
+
+#define read_c0_derraddr1()	__read_ulong_c0_register($27, 1)
+#define write_c0_derraddr1(val)	__write_ulong_c0_register($27, 1, val)
+
+#define read_c0_taglo()		__read_32bit_c0_register($28, 0)
+#define write_c0_taglo(val)	__write_32bit_c0_register($28, 0, val)
+
+#define read_c0_dtaglo()	__read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val)	__write_32bit_c0_register($28, 2, val)
+
+#define read_c0_taghi()		__read_32bit_c0_register($29, 0)
+#define write_c0_taghi(val)	__write_32bit_c0_register($29, 0, val)
+
+#define read_c0_errorepc()	__read_ulong_c0_register($30, 0)
+#define write_c0_errorepc(val)	__write_ulong_c0_register($30, 0, val)
+
+/* MIPSR2 */
+#define read_c0_hwrena()	__read_32bit_c0_register($7, 0)
+#define write_c0_hwrena(val)	__write_32bit_c0_register($7, 0, val)
+
+#define read_c0_intctl()	__read_32bit_c0_register($12, 1)
+#define write_c0_intctl(val)	__write_32bit_c0_register($12, 1, val)
+
+#define read_c0_srsctl()	__read_32bit_c0_register($12, 2)
+#define write_c0_srsctl(val)	__write_32bit_c0_register($12, 2, val)
+
+#define read_c0_srsmap()	__read_32bit_c0_register($12, 3)
+#define write_c0_srsmap(val)	__write_32bit_c0_register($12, 3, val)
+
+#define read_c0_ebase()		__read_32bit_c0_register($15, 1)
+#define write_c0_ebase(val)	__write_32bit_c0_register($15, 1, val)
+
+/*
+ * Macros to access the floating point coprocessor control registers
+ */
+#define read_32bit_cp1_register(source)                         \
+({ int __res;                                                   \
+	__asm__ __volatile__(                                   \
+	".set\tpush\n\t"					\
+	".set\treorder\n\t"					\
+        "cfc1\t%0,"STR(source)"\n\t"                            \
+	".set\tpop"						\
+        : "=r" (__res));                                        \
+        __res;})
+
+#define rddsp(mask)							\
+({									\
+	unsigned int __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push				\n"		\
+	"	.set	noat				\n"		\
+	"	# rddsp $1, %x1				\n"		\
+	"	.word	0x7c000cb8 | (%x1 << 16)	\n"		\
+	"	move	%0, $1				\n"		\
+	"	.set	pop				\n"		\
+	: "=r" (__res)							\
+	: "i" (mask));							\
+	__res;								\
+})
+
+#define wrdsp(val, mask)						\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# wrdsp $1, %x1					\n"	\
+	"	.word	0x7c2004f8 | (%x1 << 11)		\n"	\
+	"	.set	pop					\n"	\
+        :								\
+	: "r" (val), "i" (mask));					\
+} while (0)
+
+#if 0	/* Need DSP ASE capable assembler ... */
+#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
+#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
+#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
+#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
+
+#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
+#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
+#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
+#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
+
+#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
+#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
+#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
+#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
+
+#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
+#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
+#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
+#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+
+#else
+
+#define mfhi0()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mfhi	%0, $ac0		\n"			\
+	"	.word	0x00000810		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mfhi1()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mfhi	%0, $ac1		\n"			\
+	"	.word	0x00200810		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mfhi2()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mfhi	%0, $ac2		\n"			\
+	"	.word	0x00400810		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mfhi3()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mfhi	%0, $ac3		\n"			\
+	"	.word	0x00600810		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mflo0()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mflo	%0, $ac0		\n"			\
+	"	.word	0x00000812		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mflo1()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mflo	%0, $ac1		\n"			\
+	"	.word	0x00200812		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mflo2()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mflo	%0, $ac2		\n"			\
+	"	.word	0x00400812		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mflo3()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mflo	%0, $ac3		\n"			\
+	"	.word	0x00600812		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mthi0(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mthi	$1, $ac0				\n"	\
+	"	.word	0x00200011				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mthi1(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mthi	$1, $ac1				\n"	\
+	"	.word	0x00200811				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mthi2(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mthi	$1, $ac2				\n"	\
+	"	.word	0x00201011				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mthi3(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mthi	$1, $ac3				\n"	\
+	"	.word	0x00201811				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mtlo0(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mtlo	$1, $ac0				\n"	\
+	"	.word	0x00200013				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mtlo1(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mtlo	$1, $ac1				\n"	\
+	"	.word	0x00200813				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mtlo2(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mtlo	$1, $ac2				\n"	\
+	"	.word	0x00201013				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mtlo3(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mtlo	$1, $ac3				\n"	\
+	"	.word	0x00201813				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#endif
+
+/*
+ * TLB operations.
+ *
+ * It is responsibility of the caller to take care of any TLB hazards.
+ */
+static inline void tlb_probe(void)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbp\n\t"
+		".set reorder");
+}
+
+static inline void tlb_read(void)
+{
+#if MIPS34K_MISSED_ITLB_WAR
+	int res = 0;
+
+	__asm__ __volatile__(
+	"	.set	push					\n"
+	"	.set	noreorder				\n"
+	"	.set	noat					\n"
+	"	.set	mips32r2				\n"
+	"	.word	0x41610001		# dvpe $1	\n"
+	"	move	%0, $1					\n"
+	"	ehb						\n"
+	"	.set	pop					\n"
+	: "=r" (res));
+
+	instruction_hazard();
+#endif
+
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbr\n\t"
+		".set reorder");
+
+#if MIPS34K_MISSED_ITLB_WAR
+	if ((res & _ULCAST_(1)))
+		__asm__ __volatile__(
+		"	.set	push				\n"
+		"	.set	noreorder			\n"
+		"	.set	noat				\n"
+		"	.set	mips32r2			\n"
+		"	.word	0x41600021	# evpe		\n"
+		"	ehb					\n"
+		"	.set	pop				\n");
+#endif
+}
+
+static inline void tlb_write_indexed(void)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbwi\n\t"
+		".set reorder");
+}
+
+static inline void tlb_write_random(void)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbwr\n\t"
+		".set reorder");
+}
+
+/*
+ * Manipulate bits in a c0 register.
+ */
+#ifndef CONFIG_MIPS_MT_SMTC
+/*
+ * SMTC Linux requires shutting-down microthread scheduling
+ * during CP0 register read-modify-write sequences.
+ */
+#define __BUILD_SET_C0(name)					\
+static inline unsigned int					\
+set_c0_##name(unsigned int set)					\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res |= set;						\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+clear_c0_##name(unsigned int clear)				\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res &= ~clear;						\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+change_c0_##name(unsigned int change, unsigned int new)		\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res &= ~change;						\
+	res |= (new & change);					\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}
+
+#else /* SMTC versions that manage MT scheduling */
+
+#include <linux/irqflags.h>
+
+/*
+ * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
+ * header file recursion.
+ */
+static inline unsigned int __dmt(void)
+{
+	int res;
+
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	mips32r2					\n"
+	"	.set	noat						\n"
+	"	.word	0x41610BC1			# dmt $1	\n"
+	"	ehb							\n"
+	"	move	%0, $1						\n"
+	"	.set	pop						\n"
+	: "=r" (res));
+
+	instruction_hazard();
+
+	return res;
+}
+
+#define __VPECONTROL_TE_SHIFT	15
+#define __VPECONTROL_TE		(1UL << __VPECONTROL_TE_SHIFT)
+
+#define __EMT_ENABLE		__VPECONTROL_TE
+
+static inline void __emt(unsigned int previous)
+{
+	if ((previous & __EMT_ENABLE))
+		__asm__ __volatile__(
+		"	.set	mips32r2				\n"
+		"	.word	0x41600be1		# emt		\n"
+		"	ehb						\n"
+		"	.set	mips0					\n");
+}
+
+static inline void __ehb(void)
+{
+	__asm__ __volatile__(
+	"	.set	mips32r2					\n"
+	"	ehb							\n"		"	.set	mips0						\n");
+}
+
+/*
+ * Note that local_irq_save/restore affect TC-specific IXMT state,
+ * not Status.IE as in non-SMTC kernel.
+ */
+
+#define __BUILD_SET_C0(name)					\
+static inline unsigned int					\
+set_c0_##name(unsigned int set)					\
+{								\
+	unsigned int res;					\
+	unsigned int omt;					\
+	unsigned long flags;					\
+								\
+	local_irq_save(flags);					\
+	omt = __dmt();						\
+	res = read_c0_##name();					\
+	res |= set;						\
+	write_c0_##name(res);					\
+	__emt(omt);						\
+	local_irq_restore(flags);				\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+clear_c0_##name(unsigned int clear)				\
+{								\
+	unsigned int res;					\
+	unsigned int omt;					\
+	unsigned long flags;					\
+								\
+	local_irq_save(flags);					\
+	omt = __dmt();						\
+	res = read_c0_##name();					\
+	res &= ~clear;						\
+	write_c0_##name(res);					\
+	__emt(omt);						\
+	local_irq_restore(flags);				\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+change_c0_##name(unsigned int change, unsigned int new)		\
+{								\
+	unsigned int res;					\
+	unsigned int omt;					\
+	unsigned long flags;					\
+								\
+	local_irq_save(flags);					\
+								\
+	omt = __dmt();						\
+	res = read_c0_##name();					\
+	res &= ~change;						\
+	res |= (new & change);					\
+	write_c0_##name(res);					\
+	__emt(omt);						\
+	local_irq_restore(flags);				\
+								\
+	return res;						\
+}
+#endif
+
+__BUILD_SET_C0(status)
+__BUILD_SET_C0(cause)
+__BUILD_SET_C0(config)
+__BUILD_SET_C0(intcontrol)
+__BUILD_SET_C0(intctl)
+__BUILD_SET_C0(srsmap)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MIPSREGS_H */
diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h
new file mode 100644
index 0000000..e4d6f1f
--- /dev/null
+++ b/arch/mips/include/asm/mman.h
@@ -0,0 +1,77 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+
+/*
+ * Protections are chosen from these bits, OR'd together.  The
+ * implementation does not necessarily support PROT_EXEC or PROT_WRITE
+ * without PROT_READ.  The only guarantees are that no writing will be
+ * allowed without PROT_WRITE and no access will be allowed for PROT_NONE.
+ */
+#define PROT_NONE	0x00		/* page can not be accessed */
+#define PROT_READ	0x01		/* page can be read */
+#define PROT_WRITE	0x02		/* page can be written */
+#define PROT_EXEC	0x04		/* page can be executed */
+/*			0x08		   reserved for PROT_EXEC_NOFLUSH */
+#define PROT_SEM	0x10		/* page may be used for atomic ops */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+/*
+ * Flags for mmap
+ */
+#define MAP_SHARED	0x001		/* Share changes */
+#define MAP_PRIVATE	0x002		/* Changes are private */
+#define MAP_TYPE	0x00f		/* Mask for type of mapping */
+#define MAP_FIXED	0x010		/* Interpret addr exactly */
+
+/* not used by linux, but here to make sure we don't clash with ABI defines */
+#define MAP_RENAME	0x020		/* Assign page to file */
+#define MAP_AUTOGROW	0x040		/* File may grow by writing */
+#define MAP_LOCAL	0x080		/* Copy on fork/sproc */
+#define MAP_AUTORSRV	0x100		/* Logical swap reserved on demand */
+
+/* These are linux-specific */
+#define MAP_NORESERVE	0x0400		/* don't check for reservations */
+#define MAP_ANONYMOUS	0x0800		/* don't use a file */
+#define MAP_GROWSDOWN	0x1000		/* stack-like segment */
+#define MAP_DENYWRITE	0x2000		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x4000		/* mark it as an executable */
+#define MAP_LOCKED	0x8000		/* pages are locked */
+#define MAP_POPULATE	0x10000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x20000		/* do not block on IO */
+
+/*
+ * Flags for msync
+ */
+#define MS_ASYNC	0x0001		/* sync memory asynchronously */
+#define MS_INVALIDATE	0x0002		/* invalidate mappings & caches */
+#define MS_SYNC		0x0004		/* synchronous memory sync */
+
+/*
+ * Flags for mlockall
+ */
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0		/* no further special treatment */
+#define MADV_RANDOM	1		/* expect random page references */
+#define MADV_SEQUENTIAL	2		/* expect sequential page references */
+#define MADV_WILLNEED	3		/* will need these pages */
+#define MADV_DONTNEED	4		/* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE	9		/* remove these pages & resources */
+#define MADV_DONTFORK	10		/* don't inherit across fork */
+#define MADV_DOFORK	11		/* do inherit across fork */
+
+/* compatibility flags */
+#define MAP_FILE	0
+
+#endif /* _ASM_MMAN_H */
diff --git a/arch/mips/include/asm/mmu.h b/arch/mips/include/asm/mmu.h
new file mode 100644
index 0000000..4063edd
--- /dev/null
+++ b/arch/mips/include/asm/mmu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MMU_H
+#define __ASM_MMU_H
+
+typedef unsigned long mm_context_t[NR_CPUS];
+
+#endif /* __ASM_MMU_H */
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
new file mode 100644
index 0000000..d7f3eb0
--- /dev/null
+++ b/arch/mips/include/asm/mmu_context.h
@@ -0,0 +1,297 @@
+/*
+ * Switch a MMU context.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#include <asm/smtc.h>
+#endif /* SMTC */
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * For the fast tlb miss handlers, we keep a per cpu array of pointers
+ * to the current pgd for each processor. Also, the proc. id is stuffed
+ * into the context register.
+ */
+extern unsigned long pgd_current[];
+
+#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
+	pgd_current[smp_processor_id()] = (unsigned long)(pgd)
+
+#ifdef CONFIG_32BIT
+#define TLBMISS_HANDLER_SETUP()						\
+	write_c0_context((unsigned long) smp_processor_id() << 25);	\
+	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
+#endif
+#ifdef CONFIG_64BIT
+#define TLBMISS_HANDLER_SETUP()						\
+	write_c0_context((unsigned long) smp_processor_id() << 26);	\
+	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
+#endif
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define ASID_INC	0x40
+#define ASID_MASK	0xfc0
+
+#elif defined(CONFIG_CPU_R8000)
+
+#define ASID_INC	0x10
+#define ASID_MASK	0xff0
+
+#elif defined(CONFIG_CPU_RM9000)
+
+#define ASID_INC	0x1
+#define ASID_MASK	0xfff
+
+/* SMTC/34K debug hack - but maybe we'll keep it */
+#elif defined(CONFIG_MIPS_MT_SMTC)
+
+#define ASID_INC	0x1
+extern unsigned long smtc_asid_mask;
+#define ASID_MASK	(smtc_asid_mask)
+#define	HW_ASID_MASK	0xff
+/* End SMTC/34K debug hack */
+#else /* FIXME: not correct for R6000 */
+
+#define ASID_INC	0x1
+#define ASID_MASK	0xff
+
+#endif
+
+#define cpu_context(cpu, mm)	((mm)->context[cpu])
+#define cpu_asid(cpu, mm)	(cpu_context((cpu), (mm)) & ASID_MASK)
+#define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ *  All unused by hardware upper bits will be considered
+ *  as a software asid extension.
+ */
+#define ASID_VERSION_MASK  ((unsigned long)~(ASID_MASK|(ASID_MASK-1)))
+#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1)
+
+#ifndef CONFIG_MIPS_MT_SMTC
+/* Normal, classic MIPS get_new_mmu_context */
+static inline void
+get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
+{
+	unsigned long asid = asid_cache(cpu);
+
+	if (! ((asid += ASID_INC) & ASID_MASK) ) {
+		if (cpu_has_vtag_icache)
+			flush_icache_all();
+		local_flush_tlb_all();	/* start new asid cycle */
+		if (!asid)		/* fix version if needed */
+			asid = ASID_FIRST_VERSION;
+	}
+	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
+}
+
+#else /* CONFIG_MIPS_MT_SMTC */
+
+#define get_new_mmu_context(mm, cpu) smtc_get_new_mmu_context((mm), (cpu))
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	int i;
+
+	for_each_online_cpu(i)
+		cpu_context(i, mm) = 0;
+
+	return 0;
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+                             struct task_struct *tsk)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned long flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long oldasid;
+	unsigned long mtflags;
+	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+	local_irq_save(flags);
+	mtflags = dvpe();
+#else /* Not SMTC */
+	local_irq_save(flags);
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	/* Check if our ASID is of an older version and thus invalid */
+	if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK)
+		get_new_mmu_context(next, cpu);
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * If the EntryHi ASID being replaced happens to be
+	 * the value flagged at ASID recycling time as having
+	 * an extended life, clear the bit showing it being
+	 * in use by this "CPU", and if that's the last bit,
+	 * free up the ASID value for use and flush any old
+	 * instances of it from the TLB.
+	 */
+	oldasid = (read_c0_entryhi() & ASID_MASK);
+	if(smtc_live_asid[mytlb][oldasid]) {
+		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+		if(smtc_live_asid[mytlb][oldasid] == 0)
+			smtc_flush_tlb_asid(oldasid);
+	}
+	/*
+	 * Tread softly on EntryHi, and so long as we support
+	 * having ASID_MASK smaller than the hardware maximum,
+	 * make sure no "soft" bits become "hard"...
+	 */
+	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
+			| (cpu_context(cpu, next) & ASID_MASK));
+	ehb(); /* Make sure it propagates to TCStatus */
+	evpe(mtflags);
+#else
+	write_c0_entryhi(cpu_context(cpu, next));
+#endif /* CONFIG_MIPS_MT_SMTC */
+	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+
+	/*
+	 * Mark current->active_mm as not "active" anymore.
+	 * We don't want to mislead possible IPI tlb flush routines.
+	 */
+	cpu_clear(cpu, prev->cpu_vm_mask);
+	cpu_set(cpu, next->cpu_vm_mask);
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+#define deactivate_mm(tsk, mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void
+activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	unsigned long flags;
+	unsigned int cpu = smp_processor_id();
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long oldasid;
+	unsigned long mtflags;
+	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	local_irq_save(flags);
+
+	/* Unconditionally get a new ASID.  */
+	get_new_mmu_context(next, cpu);
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* See comments for similar code above */
+	mtflags = dvpe();
+	oldasid = read_c0_entryhi() & ASID_MASK;
+	if(smtc_live_asid[mytlb][oldasid]) {
+		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+		if(smtc_live_asid[mytlb][oldasid] == 0)
+			 smtc_flush_tlb_asid(oldasid);
+	}
+	/* See comments for similar code above */
+	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
+	                 (cpu_context(cpu, next) & ASID_MASK));
+	ehb(); /* Make sure it propagates to TCStatus */
+	evpe(mtflags);
+#else
+	write_c0_entryhi(cpu_context(cpu, next));
+#endif /* CONFIG_MIPS_MT_SMTC */
+	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+
+	/* mark mmu ownership change */
+	cpu_clear(cpu, prev->cpu_vm_mask);
+	cpu_set(cpu, next->cpu_vm_mask);
+
+	local_irq_restore(flags);
+}
+
+/*
+ * If mm is currently active_mm, we can't really drop it.  Instead,
+ * we will get a new one for it.
+ */
+static inline void
+drop_mmu_context(struct mm_struct *mm, unsigned cpu)
+{
+	unsigned long flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long oldasid;
+	/* Can't use spinlock because called from TLB flush within DVPE */
+	unsigned int prevvpe;
+	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	local_irq_save(flags);
+
+	if (cpu_isset(cpu, mm->cpu_vm_mask))  {
+		get_new_mmu_context(mm, cpu);
+#ifdef CONFIG_MIPS_MT_SMTC
+		/* See comments for similar code above */
+		prevvpe = dvpe();
+		oldasid = (read_c0_entryhi() & ASID_MASK);
+		if (smtc_live_asid[mytlb][oldasid]) {
+			smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+			if(smtc_live_asid[mytlb][oldasid] == 0)
+				smtc_flush_tlb_asid(oldasid);
+		}
+		/* See comments for similar code above */
+		write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
+				| cpu_asid(cpu, mm));
+		ehb(); /* Make sure it propagates to TCStatus */
+		evpe(prevvpe);
+#else /* not CONFIG_MIPS_MT_SMTC */
+		write_c0_entryhi(cpu_asid(cpu, mm));
+#endif /* CONFIG_MIPS_MT_SMTC */
+	} else {
+		/* will get a new context next time */
+#ifndef CONFIG_MIPS_MT_SMTC
+		cpu_context(cpu, mm) = 0;
+#else /* SMTC */
+		int i;
+
+		/* SMTC shares the TLB (and ASIDs) across VPEs */
+		for_each_online_cpu(i) {
+		    if((smtc_status & SMTC_TLB_SHARED)
+		    || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
+			cpu_context(i, mm) = 0;
+		}
+#endif /* CONFIG_MIPS_MT_SMTC */
+	}
+	local_irq_restore(flags);
+}
+
+#endif /* _ASM_MMU_CONTEXT_H */
diff --git a/arch/mips/include/asm/mmzone.h b/arch/mips/include/asm/mmzone.h
new file mode 100644
index 0000000..f53ec54
--- /dev/null
+++ b/arch/mips/include/asm/mmzone.h
@@ -0,0 +1,17 @@
+/*
+ * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
+ * Rewritten for Linux 2.6 by Christoph Hellwig (hch@lst.de) Jan 2004
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <asm/page.h>
+#include <mmzone.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#define pfn_to_nid(pfn)		pa_to_nid((pfn) << PAGE_SHIFT)
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
new file mode 100644
index 0000000..de6d09e
--- /dev/null
+++ b/arch/mips/include/asm/module.h
@@ -0,0 +1,136 @@
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+#include <linux/list.h>
+#include <asm/uaccess.h>
+
+struct mod_arch_specific {
+	/* Data Bus Error exception tables */
+	struct list_head dbe_list;
+	const struct exception_table_entry *dbe_start;
+	const struct exception_table_entry *dbe_end;
+};
+
+typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+
+typedef struct {
+	Elf64_Addr r_offset;			/* Address of relocation.  */
+	Elf64_Word r_sym;			/* Symbol index.  */
+	Elf64_Byte r_ssym;			/* Special symbol.  */
+	Elf64_Byte r_type3;			/* Third relocation.  */
+	Elf64_Byte r_type2;			/* Second relocation.  */
+	Elf64_Byte r_type;			/* First relocation.  */
+} Elf64_Mips_Rel;
+
+typedef struct {
+	Elf64_Addr r_offset;			/* Address of relocation.  */
+	Elf64_Word r_sym;			/* Symbol index.  */
+	Elf64_Byte r_ssym;			/* Special symbol.  */
+	Elf64_Byte r_type3;			/* Third relocation.  */
+	Elf64_Byte r_type2;			/* Second relocation.  */
+	Elf64_Byte r_type;			/* First relocation.  */
+	Elf64_Sxword r_addend;			/* Addend.  */
+} Elf64_Mips_Rela;
+
+#ifdef CONFIG_32BIT
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+#define Elf_Addr	Elf32_Addr
+
+#define Elf_Mips_Rel	Elf32_Rel
+#define Elf_Mips_Rela	Elf32_Rela
+
+#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM(rel.r_info)
+#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE(rel.r_info)
+
+#endif
+
+#ifdef CONFIG_64BIT
+
+#define Elf_Shdr	Elf64_Shdr
+#define Elf_Sym		Elf64_Sym
+#define Elf_Ehdr	Elf64_Ehdr
+#define Elf_Addr	Elf64_Addr
+
+#define Elf_Mips_Rel	Elf64_Mips_Rel
+#define Elf_Mips_Rela	Elf64_Mips_Rela
+
+#define ELF_MIPS_R_SYM(rel) (rel.r_sym)
+#define ELF_MIPS_R_TYPE(rel) (rel.r_type)
+
+#endif
+
+#ifdef CONFIG_MODULES
+/* Given an address, look for it in the exception tables. */
+const struct exception_table_entry*search_module_dbetables(unsigned long addr);
+#else
+/* Given an address, look for it in the exception tables. */
+static inline const struct exception_table_entry *
+search_module_dbetables(unsigned long addr)
+{
+	return NULL;
+}
+#endif
+
+#ifdef CONFIG_CPU_MIPS32_R1
+#define MODULE_PROC_FAMILY "MIPS32_R1 "
+#elif defined CONFIG_CPU_MIPS32_R2
+#define MODULE_PROC_FAMILY "MIPS32_R2 "
+#elif defined CONFIG_CPU_MIPS64_R1
+#define MODULE_PROC_FAMILY "MIPS64_R1 "
+#elif defined CONFIG_CPU_MIPS64_R2
+#define MODULE_PROC_FAMILY "MIPS64_R2 "
+#elif defined CONFIG_CPU_R3000
+#define MODULE_PROC_FAMILY "R3000 "
+#elif defined CONFIG_CPU_TX39XX
+#define MODULE_PROC_FAMILY "TX39XX "
+#elif defined CONFIG_CPU_VR41XX
+#define MODULE_PROC_FAMILY "VR41XX "
+#elif defined CONFIG_CPU_R4300
+#define MODULE_PROC_FAMILY "R4300 "
+#elif defined CONFIG_CPU_R4X00
+#define MODULE_PROC_FAMILY "R4X00 "
+#elif defined CONFIG_CPU_TX49XX
+#define MODULE_PROC_FAMILY "TX49XX "
+#elif defined CONFIG_CPU_R5000
+#define MODULE_PROC_FAMILY "R5000 "
+#elif defined CONFIG_CPU_R5432
+#define MODULE_PROC_FAMILY "R5432 "
+#elif defined CONFIG_CPU_R6000
+#define MODULE_PROC_FAMILY "R6000 "
+#elif defined CONFIG_CPU_NEVADA
+#define MODULE_PROC_FAMILY "NEVADA "
+#elif defined CONFIG_CPU_R8000
+#define MODULE_PROC_FAMILY "R8000 "
+#elif defined CONFIG_CPU_R10000
+#define MODULE_PROC_FAMILY "R10000 "
+#elif defined CONFIG_CPU_RM7000
+#define MODULE_PROC_FAMILY "RM7000 "
+#elif defined CONFIG_CPU_RM9000
+#define MODULE_PROC_FAMILY "RM9000 "
+#elif defined CONFIG_CPU_SB1
+#define MODULE_PROC_FAMILY "SB1 "
+#elif defined CONFIG_CPU_LOONGSON2
+#define MODULE_PROC_FAMILY "LOONGSON2 "
+#else
+#error MODULE_PROC_FAMILY undefined for your processor configuration
+#endif
+
+#ifdef CONFIG_32BIT
+#define MODULE_KERNEL_TYPE "32BIT "
+#elif defined CONFIG_64BIT
+#define MODULE_KERNEL_TYPE "64BIT "
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+#define MODULE_KERNEL_SMTC "MT_SMTC "
+#else
+#define MODULE_KERNEL_SMTC ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC
+
+#endif /* _ASM_MODULE_H */
diff --git a/arch/mips/include/asm/msc01_ic.h b/arch/mips/include/asm/msc01_ic.h
new file mode 100644
index 0000000..7989b9f
--- /dev/null
+++ b/arch/mips/include/asm/msc01_ic.h
@@ -0,0 +1,148 @@
+/*
+ * PCI Register definitions for the MIPS System Controller.
+ *
+ * Copyright (C) 2004 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_MIPS_BOARDS_MSC01_IC_H
+#define __ASM_MIPS_BOARDS_MSC01_IC_H
+
+/*****************************************************************************
+ * Register offset addresses
+ *****************************************************************************/
+
+#define MSC01_IC_RST_OFS     0x00008    /* Software reset              */
+#define MSC01_IC_ENAL_OFS    0x00100    /* Int_in enable mask 31:0     */
+#define MSC01_IC_ENAH_OFS    0x00108    /* Int_in enable mask 63:32    */
+#define MSC01_IC_DISL_OFS    0x00120    /* Int_in disable mask 31:0    */
+#define MSC01_IC_DISH_OFS    0x00128    /* Int_in disable mask 63:32   */
+#define MSC01_IC_ISBL_OFS    0x00140    /* Raw int_in 31:0             */
+#define MSC01_IC_ISBH_OFS    0x00148    /* Raw int_in 63:32            */
+#define MSC01_IC_ISAL_OFS    0x00160    /* Masked int_in 31:0          */
+#define MSC01_IC_ISAH_OFS    0x00168    /* Masked int_in 63:32         */
+#define MSC01_IC_LVL_OFS     0x00180    /* Disable priority int_out    */
+#define MSC01_IC_RAMW_OFS    0x00180    /* Shadow set RAM (EI)	       */
+#define MSC01_IC_OSB_OFS     0x00188    /* Raw int_out                 */
+#define MSC01_IC_OSA_OFS     0x00190    /* Masked int_out              */
+#define MSC01_IC_GENA_OFS    0x00198    /* Global HW int enable        */
+#define MSC01_IC_BASE_OFS    0x001a0    /* Base address of IC_VEC      */
+#define MSC01_IC_VEC_OFS     0x001b0    /* Active int's vector address */
+#define MSC01_IC_EOI_OFS     0x001c0    /* Enable lower level ints     */
+#define MSC01_IC_CFG_OFS     0x001c8    /* Configuration register      */
+#define MSC01_IC_TRLD_OFS    0x001d0    /* Interval timer reload val   */
+#define MSC01_IC_TVAL_OFS    0x001e0    /* Interval timer current val  */
+#define MSC01_IC_TCFG_OFS    0x001f0    /* Interval timer config       */
+#define MSC01_IC_SUP_OFS     0x00200    /* Set up int_in line 0        */
+#define MSC01_IC_ENA_OFS     0x00800    /* Int_in enable mask 63:0     */
+#define MSC01_IC_DIS_OFS     0x00820    /* Int_in disable mask 63:0    */
+#define MSC01_IC_ISB_OFS     0x00840    /* Raw int_in 63:0             */
+#define MSC01_IC_ISA_OFS     0x00860    /* Masked int_in 63:0          */
+
+/*****************************************************************************
+ * Register field encodings
+ *****************************************************************************/
+
+#define MSC01_IC_RST_RST_SHF      0
+#define MSC01_IC_RST_RST_MSK      0x00000001
+#define MSC01_IC_RST_RST_BIT      MSC01_IC_RST_RST_MSK
+#define MSC01_IC_LVL_LVL_SHF      0
+#define MSC01_IC_LVL_LVL_MSK      0x000000ff
+#define MSC01_IC_LVL_SPUR_SHF     16
+#define MSC01_IC_LVL_SPUR_MSK     0x00010000
+#define MSC01_IC_LVL_SPUR_BIT     MSC01_IC_LVL_SPUR_MSK
+#define MSC01_IC_RAMW_RIPL_SHF	  0
+#define MSC01_IC_RAMW_RIPL_MSK	  0x0000003f
+#define MSC01_IC_RAMW_DATA_SHF	  6
+#define MSC01_IC_RAMW_DATA_MSK	  0x00000fc0
+#define MSC01_IC_RAMW_ADDR_SHF	  25
+#define MSC01_IC_RAMW_ADDR_MSK	  0x7e000000
+#define MSC01_IC_RAMW_READ_SHF	  31
+#define MSC01_IC_RAMW_READ_MSK	  0x80000000
+#define MSC01_IC_RAMW_READ_BIT	  MSC01_IC_RAMW_READ_MSK
+#define MSC01_IC_OSB_OSB_SHF      0
+#define MSC01_IC_OSB_OSB_MSK      0x000000ff
+#define MSC01_IC_OSA_OSA_SHF      0
+#define MSC01_IC_OSA_OSA_MSK      0x000000ff
+#define MSC01_IC_GENA_GENA_SHF    0
+#define MSC01_IC_GENA_GENA_MSK    0x00000001
+#define MSC01_IC_GENA_GENA_BIT    MSC01_IC_GENA_GENA_MSK
+#define MSC01_IC_CFG_DIS_SHF      0
+#define MSC01_IC_CFG_DIS_MSK      0x00000001
+#define MSC01_IC_CFG_DIS_BIT      MSC01_IC_CFG_DIS_MSK
+#define MSC01_IC_CFG_SHFT_SHF     8
+#define MSC01_IC_CFG_SHFT_MSK     0x00000f00
+#define MSC01_IC_TCFG_ENA_SHF     0
+#define MSC01_IC_TCFG_ENA_MSK     0x00000001
+#define MSC01_IC_TCFG_ENA_BIT     MSC01_IC_TCFG_ENA_MSK
+#define MSC01_IC_TCFG_INT_SHF     8
+#define MSC01_IC_TCFG_INT_MSK     0x00000100
+#define MSC01_IC_TCFG_INT_BIT     MSC01_IC_TCFG_INT_MSK
+#define MSC01_IC_TCFG_EDGE_SHF    16
+#define MSC01_IC_TCFG_EDGE_MSK    0x00010000
+#define MSC01_IC_TCFG_EDGE_BIT    MSC01_IC_TCFG_EDGE_MSK
+#define MSC01_IC_SUP_PRI_SHF      0
+#define MSC01_IC_SUP_PRI_MSK      0x00000007
+#define MSC01_IC_SUP_EDGE_SHF     8
+#define MSC01_IC_SUP_EDGE_MSK     0x00000100
+#define MSC01_IC_SUP_EDGE_BIT     MSC01_IC_SUP_EDGE_MSK
+#define MSC01_IC_SUP_STEP         8
+
+/*
+ * MIPS System controller interrupt register base.
+ *
+ */
+
+/*****************************************************************************
+ * Absolute register addresses
+ *****************************************************************************/
+
+#define MSC01_IC_RST     (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS)
+#define MSC01_IC_ENAL    (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS)
+#define MSC01_IC_ENAH    (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS)
+#define MSC01_IC_DISL    (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS)
+#define MSC01_IC_DISH    (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS)
+#define MSC01_IC_ISBL    (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS)
+#define MSC01_IC_ISBH    (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS)
+#define MSC01_IC_ISAL    (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS)
+#define MSC01_IC_ISAH    (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS)
+#define MSC01_IC_LVL     (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS)
+#define MSC01_IC_RAMW    (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS)
+#define MSC01_IC_OSB     (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS)
+#define MSC01_IC_OSA     (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS)
+#define MSC01_IC_GENA    (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS)
+#define MSC01_IC_BASE    (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS)
+#define MSC01_IC_VEC     (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS)
+#define MSC01_IC_EOI     (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS)
+#define MSC01_IC_CFG     (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS)
+#define MSC01_IC_TRLD    (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS)
+#define MSC01_IC_TVAL    (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS)
+#define MSC01_IC_TCFG    (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS)
+#define MSC01_IC_SUP     (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS)
+#define MSC01_IC_ENA     (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS)
+#define MSC01_IC_DIS     (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS)
+#define MSC01_IC_ISB     (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS)
+#define MSC01_IC_ISA     (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS)
+
+/*
+ * Soc-it interrupts are configurable.
+ * Every board describes its IRQ mapping with this table.
+ */
+typedef struct msc_irqmap {
+	int	im_irq;
+	int	im_type;
+	int	im_lvl;
+} msc_irqmap_t;
+
+/* im_type */
+#define MSC01_IRQ_LEVEL		0
+#define MSC01_IRQ_EDGE		1
+
+extern void __init init_msc_irqs(unsigned long icubase, unsigned int base, msc_irqmap_t *imp, int nirq);
+extern void ll_msc_irq(void);
+
+#endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */
+
diff --git a/arch/mips/include/asm/msgbuf.h b/arch/mips/include/asm/msgbuf.h
new file mode 100644
index 0000000..0d6c7f1
--- /dev/null
+++ b/arch/mips/include/asm/msgbuf.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+
+/*
+ * The msqid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - extension of time_t to 64-bit on 32-bitsystem to solve the y2038 problem
+ * - 2 miscellaneous unsigned long values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused1;
+#endif
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused2;
+#endif
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused3;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused3;
+#endif
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
diff --git a/arch/mips/include/asm/mutex.h b/arch/mips/include/asm/mutex.h
new file mode 100644
index 0000000..458c1f7
--- /dev/null
+++ b/arch/mips/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h
new file mode 100644
index 0000000..c3ca959
--- /dev/null
+++ b/arch/mips/include/asm/nile4.h
@@ -0,0 +1,310 @@
+/*
+ *  asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
+ *
+ *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ *                     Sony Software Development Center Europe (SDCE), Brussels
+ *
+ *  This file is based on the following documentation:
+ *
+ *	NEC Vrc 5074 System Controller Data Sheet, June 1998
+ */
+
+#ifndef _ASM_NILE4_H
+#define _ASM_NILE4_H
+
+#define NILE4_BASE		0xbfa00000
+#define NILE4_SIZE		0x00200000		/* 2 MB */
+
+
+    /*
+     *  Physical Device Address Registers (PDARs)
+     */
+
+#define NILE4_SDRAM0	0x0000	/* SDRAM Bank 0 [R/W] */
+#define NILE4_SDRAM1	0x0008	/* SDRAM Bank 1 [R/W] */
+#define NILE4_DCS2	0x0010	/* Device Chip-Select 2 [R/W] */
+#define NILE4_DCS3	0x0018	/* Device Chip-Select 3 [R/W] */
+#define NILE4_DCS4	0x0020	/* Device Chip-Select 4 [R/W] */
+#define NILE4_DCS5	0x0028	/* Device Chip-Select 5 [R/W] */
+#define NILE4_DCS6	0x0030	/* Device Chip-Select 6 [R/W] */
+#define NILE4_DCS7	0x0038	/* Device Chip-Select 7 [R/W] */
+#define NILE4_DCS8	0x0040	/* Device Chip-Select 8 [R/W] */
+#define NILE4_PCIW0	0x0060	/* PCI Address Window 0 [R/W] */
+#define NILE4_PCIW1	0x0068	/* PCI Address Window 1 [R/W] */
+#define NILE4_INTCS	0x0070	/* Controller Internal Registers and Devices */
+				/* [R/W] */
+#define NILE4_BOOTCS	0x0078	/* Boot ROM Chip-Select [R/W] */
+
+
+    /*
+     *  CPU Interface Registers
+     */
+
+#define NILE4_CPUSTAT	0x0080	/* CPU Status [R/W] */
+#define NILE4_INTCTRL	0x0088	/* Interrupt Control [R/W] */
+#define NILE4_INTSTAT0	0x0090	/* Interrupt Status 0 [R] */
+#define NILE4_INTSTAT1	0x0098	/* Interrupt Status 1 and CPU Interrupt */
+				/* Enable [R/W] */
+#define NILE4_INTCLR	0x00A0	/* Interrupt Clear [R/W] */
+#define NILE4_INTPPES	0x00A8	/* PCI Interrupt Control [R/W] */
+
+
+    /*
+     *  Memory-Interface Registers
+     */
+
+#define NILE4_MEMCTRL	0x00C0	/* Memory Control */
+#define NILE4_ACSTIME	0x00C8	/* Memory Access Timing [R/W] */
+#define NILE4_CHKERR	0x00D0	/* Memory Check Error Status [R] */
+
+
+    /*
+     *  PCI-Bus Registers
+     */
+
+#define NILE4_PCICTRL	0x00E0	/* PCI Control [R/W] */
+#define NILE4_PCIARB	0x00E8	/* PCI Arbiter [R/W] */
+#define NILE4_PCIINIT0	0x00F0	/* PCI Master (Initiator) 0 [R/W] */
+#define NILE4_PCIINIT1	0x00F8	/* PCI Master (Initiator) 1 [R/W] */
+#define NILE4_PCIERR	0x00B8	/* PCI Error [R/W] */
+
+
+    /*
+     *  Local-Bus Registers
+     */
+
+#define NILE4_LCNFG	0x0100	/* Local Bus Configuration [R/W] */
+#define NILE4_LCST2	0x0110	/* Local Bus Chip-Select Timing 2 [R/W] */
+#define NILE4_LCST3	0x0118	/* Local Bus Chip-Select Timing 3 [R/W] */
+#define NILE4_LCST4	0x0120	/* Local Bus Chip-Select Timing 4 [R/W] */
+#define NILE4_LCST5	0x0128	/* Local Bus Chip-Select Timing 5 [R/W] */
+#define NILE4_LCST6	0x0130	/* Local Bus Chip-Select Timing 6 [R/W] */
+#define NILE4_LCST7	0x0138	/* Local Bus Chip-Select Timing 7 [R/W] */
+#define NILE4_LCST8	0x0140	/* Local Bus Chip-Select Timing 8 [R/W] */
+#define NILE4_DCSFN	0x0150	/* Device Chip-Select Muxing and Output */
+				/* Enables [R/W] */
+#define NILE4_DCSIO	0x0158	/* Device Chip-Selects As I/O Bits [R/W] */
+#define NILE4_BCST	0x0178	/* Local Boot Chip-Select Timing [R/W] */
+
+
+    /*
+     *  DMA Registers
+     */
+
+#define NILE4_DMACTRL0	0x0180	/* DMA Control 0 [R/W] */
+#define NILE4_DMASRCA0	0x0188	/* DMA Source Address 0 [R/W] */
+#define NILE4_DMADESA0	0x0190	/* DMA Destination Address 0 [R/W] */
+#define NILE4_DMACTRL1	0x0198	/* DMA Control 1 [R/W] */
+#define NILE4_DMASRCA1	0x01A0	/* DMA Source Address 1 [R/W] */
+#define NILE4_DMADESA1	0x01A8	/* DMA Destination Address 1 [R/W] */
+
+
+    /*
+     *  Timer Registers
+     */
+
+#define NILE4_T0CTRL	0x01C0	/* SDRAM Refresh Control [R/W] */
+#define NILE4_T0CNTR	0x01C8	/* SDRAM Refresh Counter [R/W] */
+#define NILE4_T1CTRL	0x01D0	/* CPU-Bus Read Time-Out Control [R/W] */
+#define NILE4_T1CNTR	0x01D8	/* CPU-Bus Read Time-Out Counter [R/W] */
+#define NILE4_T2CTRL	0x01E0	/* General-Purpose Timer Control [R/W] */
+#define NILE4_T2CNTR	0x01E8	/* General-Purpose Timer Counter [R/W] */
+#define NILE4_T3CTRL	0x01F0	/* Watchdog Timer Control [R/W] */
+#define NILE4_T3CNTR	0x01F8	/* Watchdog Timer Counter [R/W] */
+
+
+    /*
+     *  PCI Configuration Space Registers
+     */
+
+#define NILE4_PCI_BASE	0x0200
+
+#define NILE4_VID	0x0200	/* PCI Vendor ID [R] */
+#define NILE4_DID	0x0202	/* PCI Device ID [R] */
+#define NILE4_PCICMD	0x0204	/* PCI Command [R/W] */
+#define NILE4_PCISTS	0x0206	/* PCI Status [R/W] */
+#define NILE4_REVID	0x0208	/* PCI Revision ID [R] */
+#define NILE4_CLASS	0x0209	/* PCI Class Code [R] */
+#define NILE4_CLSIZ	0x020C	/* PCI Cache Line Size [R/W] */
+#define NILE4_MLTIM	0x020D	/* PCI Latency Timer [R/W] */
+#define NILE4_HTYPE	0x020E	/* PCI Header Type [R] */
+#define NILE4_BIST	0x020F	/* BIST [R] (unimplemented) */
+#define NILE4_BARC	0x0210	/* PCI Base Address Register Control [R/W] */
+#define NILE4_BAR0	0x0218	/* PCI Base Address Register 0 [R/W] */
+#define NILE4_BAR1	0x0220	/* PCI Base Address Register 1 [R/W] */
+#define NILE4_CIS	0x0228	/* PCI Cardbus CIS Pointer [R] */
+				/* (unimplemented) */
+#define NILE4_SSVID	0x022C	/* PCI Sub-System Vendor ID [R/W] */
+#define NILE4_SSID	0x022E	/* PCI Sub-System ID [R/W] */
+#define NILE4_ROM	0x0230	/* Expansion ROM Base Address [R] */
+				/* (unimplemented) */
+#define NILE4_INTLIN	0x023C	/* PCI Interrupt Line [R/W] */
+#define NILE4_INTPIN	0x023D	/* PCI Interrupt Pin [R] */
+#define NILE4_MINGNT	0x023E	/* PCI Min_Gnt [R] (unimplemented) */
+#define NILE4_MAXLAT	0x023F	/* PCI Max_Lat [R] (unimplemented) */
+#define NILE4_BAR2	0x0240	/* PCI Base Address Register 2 [R/W] */
+#define NILE4_BAR3	0x0248	/* PCI Base Address Register 3 [R/W] */
+#define NILE4_BAR4	0x0250	/* PCI Base Address Register 4 [R/W] */
+#define NILE4_BAR5	0x0258	/* PCI Base Address Register 5 [R/W] */
+#define NILE4_BAR6	0x0260	/* PCI Base Address Register 6 [R/W] */
+#define NILE4_BAR7	0x0268	/* PCI Base Address Register 7 [R/W] */
+#define NILE4_BAR8	0x0270	/* PCI Base Address Register 8 [R/W] */
+#define NILE4_BARB	0x0278	/* PCI Base Address Register BOOT [R/W] */
+
+
+    /*
+     *  Serial-Port Registers
+     */
+
+#define NILE4_UART_BASE	0x0300
+
+#define NILE4_UARTRBR	0x0300	/* UART Receiver Data Buffer [R] */
+#define NILE4_UARTTHR	0x0300	/* UART Transmitter Data Holding [W] */
+#define NILE4_UARTIER	0x0308	/* UART Interrupt Enable [R/W] */
+#define NILE4_UARTDLL	0x0300	/* UART Divisor Latch LSB [R/W] */
+#define NILE4_UARTDLM	0x0308	/* UART Divisor Latch MSB [R/W] */
+#define NILE4_UARTIIR	0x0310	/* UART Interrupt ID [R] */
+#define NILE4_UARTFCR	0x0310	/* UART FIFO Control [W] */
+#define NILE4_UARTLCR	0x0318	/* UART Line Control [R/W] */
+#define NILE4_UARTMCR	0x0320	/* UART Modem Control [R/W] */
+#define NILE4_UARTLSR	0x0328	/* UART Line Status [R/W] */
+#define NILE4_UARTMSR	0x0330	/* UART Modem Status [R/W] */
+#define NILE4_UARTSCR	0x0338	/* UART Scratch [R/W] */
+
+#define NILE4_UART_BASE_BAUD	520833	/* 100 MHz / 12 / 16 */
+
+
+    /*
+     *  Interrupt Lines
+     */
+
+#define NILE4_INT_CPCE	0	/* CPU-Interface Parity-Error Interrupt */
+#define NILE4_INT_CNTD	1	/* CPU No-Target Decode Interrupt */
+#define NILE4_INT_MCE	2	/* Memory-Check Error Interrupt */
+#define NILE4_INT_DMA	3	/* DMA Controller Interrupt */
+#define NILE4_INT_UART	4	/* UART Interrupt */
+#define NILE4_INT_WDOG	5	/* Watchdog Timer Interrupt */
+#define NILE4_INT_GPT	6	/* General-Purpose Timer Interrupt */
+#define NILE4_INT_LBRTD	7	/* Local-Bus Ready Timer Interrupt */
+#define NILE4_INT_INTA	8	/* PCI Interrupt Signal INTA# */
+#define NILE4_INT_INTB	9	/* PCI Interrupt Signal INTB# */
+#define NILE4_INT_INTC	10	/* PCI Interrupt Signal INTC# */
+#define NILE4_INT_INTD	11	/* PCI Interrupt Signal INTD# */
+#define NILE4_INT_INTE	12	/* PCI Interrupt Signal INTE# (ISA cascade) */
+#define NILE4_INT_RESV	13	/* Reserved */
+#define NILE4_INT_PCIS	14	/* PCI SERR# Interrupt */
+#define NILE4_INT_PCIE	15	/* PCI Internal Error Interrupt */
+
+
+    /*
+     *  Nile 4 Register Access
+     */
+
+static inline void nile4_sync(void)
+{
+    volatile u32 *p = (volatile u32 *)0xbfc00000;
+    (void)(*p);
+}
+
+static inline void nile4_out32(u32 offset, u32 val)
+{
+    *(volatile u32 *)(NILE4_BASE+offset) = val;
+    nile4_sync();
+}
+
+static inline u32 nile4_in32(u32 offset)
+{
+    u32 val = *(volatile u32 *)(NILE4_BASE+offset);
+    nile4_sync();
+    return val;
+}
+
+static inline void nile4_out16(u32 offset, u16 val)
+{
+    *(volatile u16 *)(NILE4_BASE+offset) = val;
+    nile4_sync();
+}
+
+static inline u16 nile4_in16(u32 offset)
+{
+    u16 val = *(volatile u16 *)(NILE4_BASE+offset);
+    nile4_sync();
+    return val;
+}
+
+static inline void nile4_out8(u32 offset, u8 val)
+{
+    *(volatile u8 *)(NILE4_BASE+offset) = val;
+    nile4_sync();
+}
+
+static inline u8 nile4_in8(u32 offset)
+{
+    u8 val = *(volatile u8 *)(NILE4_BASE+offset);
+    nile4_sync();
+    return val;
+}
+
+
+    /*
+     *  Physical Device Address Registers
+     */
+
+extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width,
+			   int on_memory_bus, int visible);
+
+
+    /*
+     *  PCI Master Registers
+     */
+
+#define NILE4_PCICMD_IACK	0	/* PCI Interrupt Acknowledge */
+#define NILE4_PCICMD_IO		1	/* PCI I/O Space */
+#define NILE4_PCICMD_MEM	3	/* PCI Memory Space */
+#define NILE4_PCICMD_CFG	5	/* PCI Configuration Space */
+
+
+    /*
+     *  PCI Address Spaces
+     *
+     *  Note that these are multiplexed using PCIINIT[01]!
+     */
+
+#define NILE4_PCI_IO_BASE	0xa6000000
+#define NILE4_PCI_MEM_BASE	0xa8000000
+#define NILE4_PCI_CFG_BASE	NILE4_PCI_MEM_BASE
+#define NILE4_PCI_IACK_BASE	NILE4_PCI_IO_BASE
+
+
+extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr);
+
+
+    /*
+     *  Interrupt Programming
+     */
+
+#define NUM_I8259_INTERRUPTS	16
+#define NUM_NILE4_INTERRUPTS	16
+
+#define IRQ_I8259_CASCADE	NILE4_INT_INTE
+#define is_i8259_irq(irq)	((irq) < NUM_I8259_INTERRUPTS)
+#define nile4_to_irq(n)		((n)+NUM_I8259_INTERRUPTS)
+#define irq_to_nile4(n)		((n)-NUM_I8259_INTERRUPTS)
+
+extern void nile4_map_irq(int nile4_irq, int cpu_irq);
+extern void nile4_map_irq_all(int cpu_irq);
+extern void nile4_enable_irq(unsigned int nile4_irq);
+extern void nile4_disable_irq(unsigned int nile4_irq);
+extern void nile4_disable_irq_all(void);
+extern u16 nile4_get_irq_stat(int cpu_irq);
+extern void nile4_enable_irq_output(int cpu_irq);
+extern void nile4_disable_irq_output(int cpu_irq);
+extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
+extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
+extern void nile4_clear_irq(int nile4_irq);
+extern void nile4_clear_irq_mask(u32 mask);
+extern u8 nile4_i8259_iack(void);
+extern void nile4_dump_irq_status(void);	/* Debug */
+
+#endif
+
diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h
new file mode 100644
index 0000000..c2394f8
--- /dev/null
+++ b/arch/mips/include/asm/paccess.h
@@ -0,0 +1,112 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * Protected memory access.  Used for everything that might take revenge
+ * by sending a DBE error like accessing possibly non-existant memory or
+ * devices.
+ */
+#ifndef _ASM_PACCESS_H
+#define _ASM_PACCESS_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_32BIT
+#define __PA_ADDR	".word"
+#endif
+#ifdef CONFIG_64BIT
+#define __PA_ADDR	".dword"
+#endif
+
+extern asmlinkage void handle_ibe(void);
+extern asmlinkage void handle_dbe(void);
+
+#define put_dbe(x, ptr) __put_dbe((x), (ptr), sizeof(*(ptr)))
+#define get_dbe(x, ptr) __get_dbe((x), (ptr), sizeof(*(ptr)))
+
+struct __large_pstruct { unsigned long buf[100]; };
+#define __mp(x) (*(struct __large_pstruct *)(x))
+
+#define __get_dbe(x, ptr, size)						\
+({									\
+	long __gu_err;							\
+	__typeof__(*(ptr)) __gu_val;					\
+	unsigned long __gu_addr;					\
+	__asm__("":"=r" (__gu_val));					\
+	__gu_addr = (unsigned long) (ptr);				\
+	__asm__("":"=r" (__gu_err));					\
+	switch (size) {							\
+	case 1: __get_dbe_asm("lb"); break;				\
+	case 2: __get_dbe_asm("lh"); break;				\
+	case 4: __get_dbe_asm("lw"); break;				\
+	case 8:  __get_dbe_asm("ld"); break;				\
+	default: __get_dbe_unknown(); break;				\
+	}								\
+	x = (__typeof__(*(ptr))) __gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_dbe_asm(insn)						\
+{									\
+	__asm__ __volatile__(						\
+	"1:\t" insn "\t%1,%2\n\t"					\
+	"move\t%0,$0\n"							\
+	"2:\n\t"							\
+	".section\t.fixup,\"ax\"\n"					\
+	"3:\tli\t%0,%3\n\t"						\
+	"move\t%1,$0\n\t"						\
+	"j\t2b\n\t"							\
+	".previous\n\t"							\
+	".section\t__dbe_table,\"a\"\n\t"				\
+	__PA_ADDR "\t1b, 3b\n\t"					\
+	".previous"							\
+	:"=r" (__gu_err), "=r" (__gu_val)				\
+	:"o" (__mp(__gu_addr)), "i" (-EFAULT));				\
+}
+
+extern void __get_dbe_unknown(void);
+
+#define __put_dbe(x, ptr, size)						\
+({									\
+	long __pu_err;							\
+	__typeof__(*(ptr)) __pu_val;					\
+	long __pu_addr;							\
+	__pu_val = (x);							\
+	__pu_addr = (long) (ptr);					\
+	__asm__("":"=r" (__pu_err));					\
+	switch (size) {							\
+	case 1: __put_dbe_asm("sb"); break;				\
+	case 2: __put_dbe_asm("sh"); break;				\
+	case 4: __put_dbe_asm("sw"); break;				\
+	case 8: __put_dbe_asm("sd"); break;				\
+	default: __put_dbe_unknown(); break;				\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_dbe_asm(insn)						\
+{									\
+	__asm__ __volatile__(						\
+	"1:\t" insn "\t%1,%2\n\t"					\
+	"move\t%0,$0\n"							\
+	"2:\n\t"							\
+	".section\t.fixup,\"ax\"\n"					\
+	"3:\tli\t%0,%3\n\t"						\
+	"j\t2b\n\t"							\
+	".previous\n\t"							\
+	".section\t__dbe_table,\"a\"\n\t"				\
+	__PA_ADDR "\t1b, 3b\n\t"					\
+	".previous"							\
+	: "=r" (__pu_err)						\
+	: "r" (__pu_val), "o" (__mp(__pu_addr)), "i" (-EFAULT));	\
+}
+
+extern void __put_dbe_unknown(void);
+
+extern unsigned long search_dbe_table(unsigned long addr);
+
+#endif /* _ASM_PACCESS_H */
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
new file mode 100644
index 0000000..fe7a88e
--- /dev/null
+++ b/arch/mips/include/asm/page.h
@@ -0,0 +1,191 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+#include <spaces.h>
+
+/*
+ * PAGE_SHIFT determines the page size
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PAGE_SHIFT	12
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define PAGE_SHIFT	13
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define PAGE_SHIFT	14
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define PAGE_SHIFT	16
+#endif
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK       (~((1 << PAGE_SHIFT) - 1))
+
+#ifndef __ASSEMBLY__
+
+#include <linux/pfn.h>
+#include <asm/io.h>
+
+extern void build_clear_page(void);
+extern void build_copy_page(void);
+
+/*
+ * It's normally defined only for FLATMEM config but it's
+ * used in our early mem init code for all memory models.
+ * So always define it.
+ */
+#define ARCH_PFN_OFFSET		PFN_UP(PHYS_OFFSET)
+
+extern void clear_page(void * page);
+extern void copy_page(void * to, void * from);
+
+extern unsigned long shm_align_mask;
+
+static inline unsigned long pages_do_alias(unsigned long addr1,
+	unsigned long addr2)
+{
+	return (addr1 ^ addr2) & shm_align_mask;
+}
+
+struct page;
+
+static inline void clear_user_page(void *addr, unsigned long vaddr,
+	struct page *page)
+{
+	extern void (*flush_data_cache_page)(unsigned long addr);
+
+	clear_page(addr);
+	if (pages_do_alias((unsigned long) addr, vaddr & PAGE_MASK))
+		flush_data_cache_page((unsigned long)addr);
+}
+
+extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+	struct page *to);
+struct vm_area_struct;
+extern void copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr, struct vm_area_struct *vma);
+
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+  #ifdef CONFIG_CPU_MIPS32
+    typedef struct { unsigned long pte_low, pte_high; } pte_t;
+    #define pte_val(x)    ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+    #define __pte(x)      ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
+  #else
+     typedef struct { unsigned long long pte; } pte_t;
+     #define pte_val(x)	((x).pte)
+     #define __pte(x)	((pte_t) { (x) } )
+  #endif
+#else
+typedef struct { unsigned long pte; } pte_t;
+#define pte_val(x)	((x).pte)
+#define __pte(x)	((pte_t) { (x) } )
+#endif
+typedef struct page *pgtable_t;
+
+/*
+ * For 3-level pagetables we defines these ourselves, for 2-level the
+ * definitions are supplied by <asm-generic/pgtable-nopmd.h>.
+ */
+#ifdef CONFIG_64BIT
+
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) } )
+
+#endif
+
+/*
+ * Right now we don't support 4-level pagetables, so all pud-related
+ * definitions come from <asm-generic/pgtable-nopud.h>.
+ */
+
+/*
+ * Finall the top of the hierarchy, the pgd
+ */
+typedef struct { unsigned long pgd; } pgd_t;
+#define pgd_val(x)	((x).pgd)
+#define __pgd(x)	((pgd_t) { (x) } )
+
+/*
+ * Manipulate page protection bits
+ */
+typedef struct { unsigned long pgprot; } pgprot_t;
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/*
+ * On R4000-style MMUs where a TLB entry is mapping a adjacent even / odd
+ * pair of pages we only have a single global bit per pair of pages.  When
+ * writing to the TLB make sure we always have the bit set for both pages
+ * or none.  This macro is used to access the `buddy' of the pte we're just
+ * working on.
+ */
+#define ptep_buddy(x)	((pte_t *)((unsigned long)(x) ^ sizeof(pte_t)))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * __pa()/__va() should be used only during mem init.
+ */
+#ifdef CONFIG_64BIT
+#define __pa(x)								\
+({									\
+    unsigned long __x = (unsigned long)(x);				\
+    __x < CKSEG0 ? XPHYSADDR(__x) : CPHYSADDR(__x);			\
+})
+#else
+#define __pa(x)								\
+    ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
+#endif
+#define __va(x)		((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+#define __pa_symbol(x)	__pa(RELOC_HIDE((unsigned long)(x), 0))
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#ifdef CONFIG_FLATMEM
+
+#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
+
+#elif defined(CONFIG_SPARSEMEM)
+
+/* pfn_valid is defined in linux/mmzone.h */
+
+#elif defined(CONFIG_NEED_MULTIPLE_NODES)
+
+#define pfn_valid(pfn)							\
+({									\
+	unsigned long __pfn = (pfn);					\
+	int __n = pfn_to_nid(__pfn);					\
+	((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn +		\
+	                       NODE_DATA(__n)->node_spanned_pages)	\
+	            : 0);						\
+})
+
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(PFN_DOWN(virt_to_phys(kaddr)))
+#define virt_addr_valid(kaddr)	pfn_valid(PFN_DOWN(virt_to_phys(kaddr)))
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE)
+#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _ASM_PAGE_H */
diff --git a/arch/mips/include/asm/param.h b/arch/mips/include/asm/param.h
new file mode 100644
index 0000000..1d9bb8c
--- /dev/null
+++ b/arch/mips/include/asm/param.h
@@ -0,0 +1,31 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 1994 - 2000, 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	65536
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _ASM_PARAM_H */
diff --git a/arch/mips/include/asm/parport.h b/arch/mips/include/asm/parport.h
new file mode 100644
index 0000000..f526568
--- /dev/null
+++ b/arch/mips/include/asm/parport.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+#ifndef _ASM_PARPORT_H
+#define _ASM_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* _ASM_PARPORT_H */
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
new file mode 100644
index 0000000..5510c53
--- /dev/null
+++ b/arch/mips/include/asm/pci.h
@@ -0,0 +1,179 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#include <linux/mm.h>
+
+#ifdef __KERNEL__
+
+/*
+ * This file essentially defines the interface between board
+ * specific PCI code and MIPS common PCI code.  Should potentially put
+ * into include/asm/pci.h file.
+ */
+
+#include <linux/ioport.h>
+
+/*
+ * Each pci channel is a top-level PCI bus seem by CPU.  A machine  with
+ * multiple PCI channels may have multiple PCI host controllers or a
+ * single controller supporting multiple channels.
+ */
+struct pci_controller {
+	struct pci_controller *next;
+	struct pci_bus *bus;
+
+	struct pci_ops *pci_ops;
+	struct resource *mem_resource;
+	unsigned long mem_offset;
+	struct resource *io_resource;
+	unsigned long io_offset;
+	unsigned long io_map_base;
+
+	unsigned int index;
+	/* For compatibility with current (as of July 2003) pciutils
+	   and XFree86. Eventually will be removed. */
+	unsigned int need_domain_info;
+
+	int iommu;
+
+	/* Optional access methods for reading/writing the bus number
+	   of the PCI controller */
+	int (*get_busno)(void);
+	void (*set_busno)(int busno);
+};
+
+/*
+ * Used by boards to register their PCI busses before the actual scanning.
+ */
+extern struct pci_controller * alloc_pci_controller(void);
+extern void register_pci_controller(struct pci_controller *hose);
+
+/*
+ * board supplied pci irq fixup routine
+ */
+extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+extern unsigned int pcibios_assign_all_busses(void);
+
+#define pcibios_scan_all_fns(a, b)	0
+
+extern unsigned long PCIBIOS_MIN_IO;
+extern unsigned long PCIBIOS_MIN_MEM;
+
+#define PCIBIOS_MIN_CARDBUS_IO	0x4000
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/*
+ * Dynamic DMA mapping stuff.
+ * MIPS has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/*
+ * The PCI address space does equal the physical memory address space.  The
+ * networking and block device layers use this boolean for bounce buffer
+ * decisions.  This is set if any hose does not have an IOMMU.
+ */
+extern unsigned int PCI_DMA_BUS_IS_PHYS;
+
+#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
+
+#else /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+	struct pci_bus_region *region, struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+				    struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+	return hose->need_domain_info;
+}
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* Do platform specific device initialization at pci_enable_device() time */
+extern int pcibios_plat_dev_init(struct pci_dev *dev);
+
+/* Chances are this interrupt is wired PC-style ...  */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
+
+extern int pci_probe_only;
+
+extern char * (*pcibios_plat_setup)(char *str);
+
+#endif /* _ASM_PCI_H */
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
new file mode 100644
index 0000000..5f4b9d4
--- /dev/null
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -0,0 +1,854 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * bridge.h - bridge chip header file, derived from IRIX <sys/PCI/bridge.h>,
+ * revision 1.76.
+ *
+ * Copyright (C) 1996, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_PCI_BRIDGE_H
+#define _ASM_PCI_BRIDGE_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/xtalk/xwidget.h>		/* generic widget header */
+#include <asm/sn/types.h>
+
+/* I/O page size */
+
+#define IOPFNSHIFT		12	/* 4K per mapped page */
+
+#define IOPGSIZE		(1 << IOPFNSHIFT)
+#define IOPG(x)			((x) >> IOPFNSHIFT)
+#define IOPGOFF(x)		((x) & (IOPGSIZE-1))
+
+/* Bridge RAM sizes */
+
+#define BRIDGE_ATE_RAM_SIZE	0x00000400	/* 1kB ATE RAM */
+
+#define BRIDGE_CONFIG_BASE	0x20000
+#define BRIDGE_CONFIG1_BASE	0x28000
+#define BRIDGE_CONFIG_END	0x30000
+#define BRIDGE_CONFIG_SLOT_SIZE 0x1000
+
+#define BRIDGE_SSRAM_512K	0x00080000	/* 512kB */
+#define BRIDGE_SSRAM_128K	0x00020000	/* 128kB */
+#define BRIDGE_SSRAM_64K	0x00010000	/* 64kB */
+#define BRIDGE_SSRAM_0K		0x00000000	/* 0kB */
+
+/* ========================================================================
+ *    Bridge address map
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * All accesses to bridge hardware registers must be done
+ * using 32-bit loads and stores.
+ */
+typedef u32	bridgereg_t;
+
+typedef u64	bridge_ate_t;
+
+/* pointers to bridge ATEs
+ * are always "pointer to volatile"
+ */
+typedef volatile bridge_ate_t  *bridge_ate_p;
+
+/*
+ * It is generally preferred that hardware registers on the bridge
+ * are located from C code via this structure.
+ *
+ * Generated from Bridge spec dated 04oct95
+ */
+
+typedef volatile struct bridge_s {
+	/* Local Registers			       0x000000-0x00FFFF */
+
+	/* standard widget configuration	       0x000000-0x000057 */
+	widget_cfg_t	    b_widget;			/* 0x000000 */
+
+	/* helper fieldnames for accessing bridge widget */
+
+#define b_wid_id			b_widget.w_id
+#define b_wid_stat			b_widget.w_status
+#define b_wid_err_upper			b_widget.w_err_upper_addr
+#define b_wid_err_lower			b_widget.w_err_lower_addr
+#define b_wid_control			b_widget.w_control
+#define b_wid_req_timeout		b_widget.w_req_timeout
+#define b_wid_int_upper			b_widget.w_intdest_upper_addr
+#define b_wid_int_lower			b_widget.w_intdest_lower_addr
+#define b_wid_err_cmdword		b_widget.w_err_cmd_word
+#define b_wid_llp			b_widget.w_llp_cfg
+#define b_wid_tflush			b_widget.w_tflush
+
+	/* bridge-specific widget configuration	0x000058-0x00007F */
+	bridgereg_t	    _pad_000058;
+	bridgereg_t	    b_wid_aux_err;		/* 0x00005C */
+	bridgereg_t	    _pad_000060;
+	bridgereg_t	    b_wid_resp_upper;		/* 0x000064 */
+	bridgereg_t	    _pad_000068;
+	bridgereg_t	    b_wid_resp_lower;		/* 0x00006C */
+	bridgereg_t	    _pad_000070;
+	bridgereg_t	    b_wid_tst_pin_ctrl;		/* 0x000074 */
+	bridgereg_t	_pad_000078[2];
+
+	/* PMU & Map 0x000080-0x00008F */
+	bridgereg_t	_pad_000080;
+	bridgereg_t	b_dir_map;			/* 0x000084 */
+	bridgereg_t	_pad_000088[2];
+
+	/* SSRAM 0x000090-0x00009F */
+	bridgereg_t	_pad_000090;
+	bridgereg_t	b_ram_perr;			/* 0x000094 */
+	bridgereg_t	_pad_000098[2];
+
+	/* Arbitration 0x0000A0-0x0000AF */
+	bridgereg_t	_pad_0000A0;
+	bridgereg_t	b_arb;				/* 0x0000A4 */
+	bridgereg_t	_pad_0000A8[2];
+
+	/* Number In A Can 0x0000B0-0x0000BF */
+	bridgereg_t	_pad_0000B0;
+	bridgereg_t	b_nic;				/* 0x0000B4 */
+	bridgereg_t	_pad_0000B8[2];
+
+	/* PCI/GIO 0x0000C0-0x0000FF */
+	bridgereg_t	_pad_0000C0;
+	bridgereg_t	b_bus_timeout;			/* 0x0000C4 */
+#define b_pci_bus_timeout b_bus_timeout
+
+	bridgereg_t	_pad_0000C8;
+	bridgereg_t	b_pci_cfg;			/* 0x0000CC */
+	bridgereg_t	_pad_0000D0;
+	bridgereg_t	b_pci_err_upper;		/* 0x0000D4 */
+	bridgereg_t	_pad_0000D8;
+	bridgereg_t	b_pci_err_lower;		/* 0x0000DC */
+	bridgereg_t	_pad_0000E0[8];
+#define b_gio_err_lower b_pci_err_lower
+#define b_gio_err_upper b_pci_err_upper
+
+	/* Interrupt 0x000100-0x0001FF */
+	bridgereg_t	_pad_000100;
+	bridgereg_t	b_int_status;			/* 0x000104 */
+	bridgereg_t	_pad_000108;
+	bridgereg_t	b_int_enable;			/* 0x00010C */
+	bridgereg_t	_pad_000110;
+	bridgereg_t	b_int_rst_stat;			/* 0x000114 */
+	bridgereg_t	_pad_000118;
+	bridgereg_t	b_int_mode;			/* 0x00011C */
+	bridgereg_t	_pad_000120;
+	bridgereg_t	b_int_device;			/* 0x000124 */
+	bridgereg_t	_pad_000128;
+	bridgereg_t	b_int_host_err;			/* 0x00012C */
+
+	struct {
+		bridgereg_t	__pad;			/* 0x0001{30,,,68} */
+		bridgereg_t	addr;			/* 0x0001{34,,,6C} */
+	} b_int_addr[8];				/* 0x000130 */
+
+	bridgereg_t	_pad_000170[36];
+
+	/* Device 0x000200-0x0003FF */
+	struct {
+		bridgereg_t	__pad;			/* 0x0002{00,,,38} */
+		bridgereg_t	reg;			/* 0x0002{04,,,3C} */
+	} b_device[8];					/* 0x000200 */
+
+	struct {
+		bridgereg_t	__pad;			/* 0x0002{40,,,78} */
+		bridgereg_t	reg;			/* 0x0002{44,,,7C} */
+	} b_wr_req_buf[8];				/* 0x000240 */
+
+	struct {
+		bridgereg_t	__pad;			/* 0x0002{80,,,88} */
+		bridgereg_t	reg;			/* 0x0002{84,,,8C} */
+	} b_rrb_map[2];					/* 0x000280 */
+#define	b_even_resp	b_rrb_map[0].reg		/* 0x000284 */
+#define	b_odd_resp	b_rrb_map[1].reg		/* 0x00028C */
+
+	bridgereg_t	_pad_000290;
+	bridgereg_t	b_resp_status;			/* 0x000294 */
+	bridgereg_t	_pad_000298;
+	bridgereg_t	b_resp_clear;			/* 0x00029C */
+
+	bridgereg_t	_pad_0002A0[24];
+
+	char		_pad_000300[0x10000 - 0x000300];
+
+	/* Internal Address Translation Entry RAM 0x010000-0x0103FF */
+	union {
+		bridge_ate_t	wr;			/* write-only */
+		struct {
+			bridgereg_t	_p_pad;
+			bridgereg_t	rd;		/* read-only */
+		}			hi;
+	}			    b_int_ate_ram[128];
+
+	char	_pad_010400[0x11000 - 0x010400];
+
+	/* Internal Address Translation Entry RAM LOW 0x011000-0x0113FF */
+	struct {
+		bridgereg_t	_p_pad;
+		bridgereg_t	rd;		/* read-only */
+	} b_int_ate_ram_lo[128];
+
+	char	_pad_011400[0x20000 - 0x011400];
+
+	/* PCI Device Configuration Spaces 0x020000-0x027FFF */
+	union {				/* make all access sizes available. */
+		u8	c[0x1000 / 1];
+		u16	s[0x1000 / 2];
+		u32	l[0x1000 / 4];
+		u64	d[0x1000 / 8];
+		union {
+			u8	c[0x100 / 1];
+			u16	s[0x100 / 2];
+			u32	l[0x100 / 4];
+			u64	d[0x100 / 8];
+		} f[8];
+	} b_type0_cfg_dev[8];					/* 0x020000 */
+
+    /* PCI Type 1 Configuration Space 0x028000-0x028FFF */
+	union {				/* make all access sizes available. */
+		u8	c[0x1000 / 1];
+		u16	s[0x1000 / 2];
+		u32	l[0x1000 / 4];
+		u64	d[0x1000 / 8];
+	} b_type1_cfg;					/* 0x028000-0x029000 */
+
+	char	_pad_029000[0x007000];			/* 0x029000-0x030000 */
+
+	/* PCI Interrupt Acknowledge Cycle 0x030000 */
+	union {
+		u8	c[8 / 1];
+		u16	s[8 / 2];
+		u32	l[8 / 4];
+		u64	d[8 / 8];
+	} b_pci_iack;						/* 0x030000 */
+
+	u8	_pad_030007[0x04fff8];			/* 0x030008-0x07FFFF */
+
+	/* External Address Translation Entry RAM 0x080000-0x0FFFFF */
+	bridge_ate_t    b_ext_ate_ram[0x10000];
+
+	/* Reserved 0x100000-0x1FFFFF */
+	char	_pad_100000[0x200000-0x100000];
+
+	/* PCI/GIO Device Spaces 0x200000-0xBFFFFF */
+	union {				/* make all access sizes available. */
+		u8	c[0x100000 / 1];
+		u16	s[0x100000 / 2];
+		u32	l[0x100000 / 4];
+		u64	d[0x100000 / 8];
+	} b_devio_raw[10];				/* 0x200000 */
+
+	/* b_devio macro is a bit strange; it reflects the
+	 * fact that the Bridge ASIC provides 2M for the
+	 * first two DevIO windows and 1M for the other six.
+	 */
+#define b_devio(n)	b_devio_raw[((n)<2)?(n*2):(n+2)]
+
+	/* External Flash Proms 1,0 0xC00000-0xFFFFFF */
+	union {		/* make all access sizes available. */
+		u8	c[0x400000 / 1];	/* read-only */
+		u16	s[0x400000 / 2];	/* read-write */
+		u32	l[0x400000 / 4];	/* read-only */
+		u64	d[0x400000 / 8];	/* read-only */
+	} b_external_flash;			/* 0xC00000 */
+} bridge_t;
+
+/*
+ * Field formats for Error Command Word and Auxillary Error Command Word
+ * of bridge.
+ */
+typedef struct bridge_err_cmdword_s {
+	union {
+		u32		cmd_word;
+		struct {
+			u32	didn:4,		/* Destination ID */
+				sidn:4,		/* Source ID	  */
+				pactyp:4,	/* Packet type	  */
+				tnum:5,		/* Trans Number	  */
+				coh:1,		/* Coh Transacti  */
+				ds:2,		/* Data size	  */
+				gbr:1,		/* GBR enable	  */
+				vbpm:1,		/* VBPM message	  */
+				error:1,	/* Error occurred  */
+				barr:1,		/* Barrier op	  */
+				rsvd:8;
+		} berr_st;
+	} berr_un;
+} bridge_err_cmdword_t;
+
+#define berr_field	berr_un.berr_st
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The values of these macros can and should be crosschecked
+ * regularly against the offsets of the like-named fields
+ * within the "bridge_t" structure above.
+ */
+
+/* Byte offset macros for Bridge internal registers */
+
+#define BRIDGE_WID_ID		WIDGET_ID
+#define BRIDGE_WID_STAT		WIDGET_STATUS
+#define BRIDGE_WID_ERR_UPPER	WIDGET_ERR_UPPER_ADDR
+#define BRIDGE_WID_ERR_LOWER	WIDGET_ERR_LOWER_ADDR
+#define BRIDGE_WID_CONTROL	WIDGET_CONTROL
+#define BRIDGE_WID_REQ_TIMEOUT	WIDGET_REQ_TIMEOUT
+#define BRIDGE_WID_INT_UPPER	WIDGET_INTDEST_UPPER_ADDR
+#define BRIDGE_WID_INT_LOWER	WIDGET_INTDEST_LOWER_ADDR
+#define BRIDGE_WID_ERR_CMDWORD	WIDGET_ERR_CMD_WORD
+#define BRIDGE_WID_LLP		WIDGET_LLP_CFG
+#define BRIDGE_WID_TFLUSH	WIDGET_TFLUSH
+
+#define BRIDGE_WID_AUX_ERR	0x00005C	/* Aux Error Command Word */
+#define BRIDGE_WID_RESP_UPPER	0x000064	/* Response Buf Upper Addr */
+#define BRIDGE_WID_RESP_LOWER	0x00006C	/* Response Buf Lower Addr */
+#define BRIDGE_WID_TST_PIN_CTRL 0x000074	/* Test pin control */
+
+#define BRIDGE_DIR_MAP		0x000084	/* Direct Map reg */
+
+#define BRIDGE_RAM_PERR		0x000094	/* SSRAM Parity Error */
+
+#define BRIDGE_ARB		0x0000A4	/* Arbitration Priority reg */
+
+#define BRIDGE_NIC		0x0000B4	/* Number In A Can */
+
+#define BRIDGE_BUS_TIMEOUT	0x0000C4	/* Bus Timeout Register */
+#define BRIDGE_PCI_BUS_TIMEOUT	BRIDGE_BUS_TIMEOUT
+#define BRIDGE_PCI_CFG		0x0000CC	/* PCI Type 1 Config reg */
+#define BRIDGE_PCI_ERR_UPPER	0x0000D4	/* PCI error Upper Addr */
+#define BRIDGE_PCI_ERR_LOWER	0x0000DC	/* PCI error Lower Addr */
+
+#define BRIDGE_INT_STATUS	0x000104	/* Interrupt Status */
+#define BRIDGE_INT_ENABLE	0x00010C	/* Interrupt Enables */
+#define BRIDGE_INT_RST_STAT	0x000114	/* Reset Intr Status */
+#define BRIDGE_INT_MODE		0x00011C	/* Interrupt Mode */
+#define BRIDGE_INT_DEVICE	0x000124	/* Interrupt Device */
+#define BRIDGE_INT_HOST_ERR	0x00012C	/* Host Error Field */
+
+#define BRIDGE_INT_ADDR0	0x000134	/* Host Address Reg */
+#define BRIDGE_INT_ADDR_OFF	0x000008	/* Host Addr offset (1..7) */
+#define BRIDGE_INT_ADDR(x)	(BRIDGE_INT_ADDR0+(x)*BRIDGE_INT_ADDR_OFF)
+
+#define BRIDGE_DEVICE0		0x000204	/* Device 0 */
+#define BRIDGE_DEVICE_OFF	0x000008	/* Device offset (1..7) */
+#define BRIDGE_DEVICE(x)	(BRIDGE_DEVICE0+(x)*BRIDGE_DEVICE_OFF)
+
+#define BRIDGE_WR_REQ_BUF0	0x000244	/* Write Request Buffer 0 */
+#define BRIDGE_WR_REQ_BUF_OFF	0x000008	/* Buffer Offset (1..7) */
+#define BRIDGE_WR_REQ_BUF(x)	(BRIDGE_WR_REQ_BUF0+(x)*BRIDGE_WR_REQ_BUF_OFF)
+
+#define BRIDGE_EVEN_RESP	0x000284	/* Even Device Response Buf */
+#define BRIDGE_ODD_RESP		0x00028C	/* Odd Device Response Buf */
+
+#define BRIDGE_RESP_STATUS	0x000294	/* Read Response Status reg */
+#define BRIDGE_RESP_CLEAR	0x00029C	/* Read Response Clear reg */
+
+/* Byte offset macros for Bridge I/O space */
+
+#define BRIDGE_ATE_RAM		0x00010000	/* Internal Addr Xlat Ram */
+
+#define BRIDGE_TYPE0_CFG_DEV0	0x00020000	/* Type 0 Cfg, Device 0 */
+#define BRIDGE_TYPE0_CFG_SLOT_OFF	0x00001000	/* Type 0 Cfg Slot Offset (1..7) */
+#define BRIDGE_TYPE0_CFG_FUNC_OFF	0x00000100	/* Type 0 Cfg Func Offset (1..7) */
+#define BRIDGE_TYPE0_CFG_DEV(s)		(BRIDGE_TYPE0_CFG_DEV0+\
+					 (s)*BRIDGE_TYPE0_CFG_SLOT_OFF)
+#define BRIDGE_TYPE0_CFG_DEVF(s, f)	(BRIDGE_TYPE0_CFG_DEV0+\
+					 (s)*BRIDGE_TYPE0_CFG_SLOT_OFF+\
+					 (f)*BRIDGE_TYPE0_CFG_FUNC_OFF)
+
+#define BRIDGE_TYPE1_CFG	0x00028000	/* Type 1 Cfg space */
+
+#define BRIDGE_PCI_IACK		0x00030000	/* PCI Interrupt Ack */
+#define BRIDGE_EXT_SSRAM	0x00080000	/* Extern SSRAM (ATE) */
+
+/* Byte offset macros for Bridge device IO spaces */
+
+#define BRIDGE_DEV_CNT		8	/* Up to 8 devices per bridge */
+#define BRIDGE_DEVIO0		0x00200000	/* Device IO 0 Addr */
+#define BRIDGE_DEVIO1		0x00400000	/* Device IO 1 Addr */
+#define BRIDGE_DEVIO2		0x00600000	/* Device IO 2 Addr */
+#define BRIDGE_DEVIO_OFF	0x00100000	/* Device IO Offset (3..7) */
+
+#define BRIDGE_DEVIO_2MB	0x00200000	/* Device IO Offset (0..1) */
+#define BRIDGE_DEVIO_1MB	0x00100000	/* Device IO Offset (2..7) */
+
+#define BRIDGE_DEVIO(x)		((x)<=1 ? BRIDGE_DEVIO0+(x)*BRIDGE_DEVIO_2MB : BRIDGE_DEVIO2+((x)-2)*BRIDGE_DEVIO_1MB)
+
+#define BRIDGE_EXTERNAL_FLASH	0x00C00000	/* External Flash PROMS */
+
+/* ========================================================================
+ *    Bridge register bit field definitions
+ */
+
+/* Widget part number of bridge */
+#define BRIDGE_WIDGET_PART_NUM		0xc002
+#define XBRIDGE_WIDGET_PART_NUM		0xd002
+
+/* Manufacturer of bridge */
+#define BRIDGE_WIDGET_MFGR_NUM		0x036
+#define XBRIDGE_WIDGET_MFGR_NUM		0x024
+
+/* Revision numbers for known Bridge revisions */
+#define BRIDGE_REV_A			0x1
+#define BRIDGE_REV_B			0x2
+#define BRIDGE_REV_C			0x3
+#define	BRIDGE_REV_D			0x4
+
+/* Bridge widget status register bits definition */
+
+#define BRIDGE_STAT_LLP_REC_CNT		(0xFFu << 24)
+#define BRIDGE_STAT_LLP_TX_CNT		(0xFF << 16)
+#define BRIDGE_STAT_FLASH_SELECT	(0x1 << 6)
+#define BRIDGE_STAT_PCI_GIO_N		(0x1 << 5)
+#define BRIDGE_STAT_PENDING		(0x1F << 0)
+
+/* Bridge widget control register bits definition */
+#define BRIDGE_CTRL_FLASH_WR_EN		(0x1ul << 31)
+#define BRIDGE_CTRL_EN_CLK50		(0x1 << 30)
+#define BRIDGE_CTRL_EN_CLK40		(0x1 << 29)
+#define BRIDGE_CTRL_EN_CLK33		(0x1 << 28)
+#define BRIDGE_CTRL_RST(n)		((n) << 24)
+#define BRIDGE_CTRL_RST_MASK		(BRIDGE_CTRL_RST(0xF))
+#define BRIDGE_CTRL_RST_PIN(x)		(BRIDGE_CTRL_RST(0x1 << (x)))
+#define BRIDGE_CTRL_IO_SWAP		(0x1 << 23)
+#define BRIDGE_CTRL_MEM_SWAP		(0x1 << 22)
+#define BRIDGE_CTRL_PAGE_SIZE		(0x1 << 21)
+#define BRIDGE_CTRL_SS_PAR_BAD		(0x1 << 20)
+#define BRIDGE_CTRL_SS_PAR_EN		(0x1 << 19)
+#define BRIDGE_CTRL_SSRAM_SIZE(n)	((n) << 17)
+#define BRIDGE_CTRL_SSRAM_SIZE_MASK	(BRIDGE_CTRL_SSRAM_SIZE(0x3))
+#define BRIDGE_CTRL_SSRAM_512K		(BRIDGE_CTRL_SSRAM_SIZE(0x3))
+#define BRIDGE_CTRL_SSRAM_128K		(BRIDGE_CTRL_SSRAM_SIZE(0x2))
+#define BRIDGE_CTRL_SSRAM_64K		(BRIDGE_CTRL_SSRAM_SIZE(0x1))
+#define BRIDGE_CTRL_SSRAM_1K		(BRIDGE_CTRL_SSRAM_SIZE(0x0))
+#define BRIDGE_CTRL_F_BAD_PKT		(0x1 << 16)
+#define BRIDGE_CTRL_LLP_XBAR_CRD(n)	((n) << 12)
+#define BRIDGE_CTRL_LLP_XBAR_CRD_MASK	(BRIDGE_CTRL_LLP_XBAR_CRD(0xf))
+#define BRIDGE_CTRL_CLR_RLLP_CNT	(0x1 << 11)
+#define BRIDGE_CTRL_CLR_TLLP_CNT	(0x1 << 10)
+#define BRIDGE_CTRL_SYS_END		(0x1 << 9)
+#define BRIDGE_CTRL_MAX_TRANS(n)	((n) << 4)
+#define BRIDGE_CTRL_MAX_TRANS_MASK	(BRIDGE_CTRL_MAX_TRANS(0x1f))
+#define BRIDGE_CTRL_WIDGET_ID(n)	((n) << 0)
+#define BRIDGE_CTRL_WIDGET_ID_MASK	(BRIDGE_CTRL_WIDGET_ID(0xf))
+
+/* Bridge Response buffer Error Upper Register bit fields definition */
+#define BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT (20)
+#define BRIDGE_RESP_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT)
+#define BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT (16)
+#define BRIDGE_RESP_ERRUPPR_BUFNUM_MASK (0xF << BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT)
+#define BRIDGE_RESP_ERRRUPPR_BUFMASK	(0xFFFF)
+
+#define BRIDGE_RESP_ERRUPPR_BUFNUM(x)	\
+			(((x) & BRIDGE_RESP_ERRUPPR_BUFNUM_MASK) >> \
+				BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT)
+
+#define BRIDGE_RESP_ERRUPPR_DEVICE(x)	\
+			(((x) &	 BRIDGE_RESP_ERRUPPR_DEVNUM_MASK) >> \
+				 BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT)
+
+/* Bridge direct mapping register bits definition */
+#define BRIDGE_DIRMAP_W_ID_SHFT		20
+#define BRIDGE_DIRMAP_W_ID		(0xf << BRIDGE_DIRMAP_W_ID_SHFT)
+#define BRIDGE_DIRMAP_RMF_64		(0x1 << 18)
+#define BRIDGE_DIRMAP_ADD512		(0x1 << 17)
+#define BRIDGE_DIRMAP_OFF		(0x1ffff << 0)
+#define BRIDGE_DIRMAP_OFF_ADDRSHFT	(31)	/* lsbit of DIRMAP_OFF is xtalk address bit 31 */
+
+/* Bridge Arbitration register bits definition */
+#define BRIDGE_ARB_REQ_WAIT_TICK(x)	((x) << 16)
+#define BRIDGE_ARB_REQ_WAIT_TICK_MASK	BRIDGE_ARB_REQ_WAIT_TICK(0x3)
+#define BRIDGE_ARB_REQ_WAIT_EN(x)	((x) << 8)
+#define BRIDGE_ARB_REQ_WAIT_EN_MASK	BRIDGE_ARB_REQ_WAIT_EN(0xff)
+#define BRIDGE_ARB_FREEZE_GNT		(1 << 6)
+#define BRIDGE_ARB_HPRI_RING_B2		(1 << 5)
+#define BRIDGE_ARB_HPRI_RING_B1		(1 << 4)
+#define BRIDGE_ARB_HPRI_RING_B0		(1 << 3)
+#define BRIDGE_ARB_LPRI_RING_B2		(1 << 2)
+#define BRIDGE_ARB_LPRI_RING_B1		(1 << 1)
+#define BRIDGE_ARB_LPRI_RING_B0		(1 << 0)
+
+/* Bridge Bus time-out register bits definition */
+#define BRIDGE_BUS_PCI_RETRY_HLD(x)	((x) << 16)
+#define BRIDGE_BUS_PCI_RETRY_HLD_MASK	BRIDGE_BUS_PCI_RETRY_HLD(0x1f)
+#define BRIDGE_BUS_GIO_TIMEOUT		(1 << 12)
+#define BRIDGE_BUS_PCI_RETRY_CNT(x)	((x) << 0)
+#define BRIDGE_BUS_PCI_RETRY_MASK	BRIDGE_BUS_PCI_RETRY_CNT(0x3ff)
+
+/* Bridge interrupt status register bits definition */
+#define BRIDGE_ISR_MULTI_ERR		(0x1u << 31)
+#define BRIDGE_ISR_PMU_ESIZE_FAULT	(0x1 << 30)
+#define BRIDGE_ISR_UNEXP_RESP		(0x1 << 29)
+#define BRIDGE_ISR_BAD_XRESP_PKT	(0x1 << 28)
+#define BRIDGE_ISR_BAD_XREQ_PKT		(0x1 << 27)
+#define BRIDGE_ISR_RESP_XTLK_ERR	(0x1 << 26)
+#define BRIDGE_ISR_REQ_XTLK_ERR		(0x1 << 25)
+#define BRIDGE_ISR_INVLD_ADDR		(0x1 << 24)
+#define BRIDGE_ISR_UNSUPPORTED_XOP	(0x1 << 23)
+#define BRIDGE_ISR_XREQ_FIFO_OFLOW	(0x1 << 22)
+#define BRIDGE_ISR_LLP_REC_SNERR	(0x1 << 21)
+#define BRIDGE_ISR_LLP_REC_CBERR	(0x1 << 20)
+#define BRIDGE_ISR_LLP_RCTY		(0x1 << 19)
+#define BRIDGE_ISR_LLP_TX_RETRY		(0x1 << 18)
+#define BRIDGE_ISR_LLP_TCTY		(0x1 << 17)
+#define BRIDGE_ISR_SSRAM_PERR		(0x1 << 16)
+#define BRIDGE_ISR_PCI_ABORT		(0x1 << 15)
+#define BRIDGE_ISR_PCI_PARITY		(0x1 << 14)
+#define BRIDGE_ISR_PCI_SERR		(0x1 << 13)
+#define BRIDGE_ISR_PCI_PERR		(0x1 << 12)
+#define BRIDGE_ISR_PCI_MST_TIMEOUT	(0x1 << 11)
+#define BRIDGE_ISR_GIO_MST_TIMEOUT	BRIDGE_ISR_PCI_MST_TIMEOUT
+#define BRIDGE_ISR_PCI_RETRY_CNT	(0x1 << 10)
+#define BRIDGE_ISR_XREAD_REQ_TIMEOUT	(0x1 << 9)
+#define BRIDGE_ISR_GIO_B_ENBL_ERR	(0x1 << 8)
+#define BRIDGE_ISR_INT_MSK		(0xff << 0)
+#define BRIDGE_ISR_INT(x)		(0x1 << (x))
+
+#define BRIDGE_ISR_LINK_ERROR		\
+		(BRIDGE_ISR_LLP_REC_SNERR|BRIDGE_ISR_LLP_REC_CBERR|	\
+		 BRIDGE_ISR_LLP_RCTY|BRIDGE_ISR_LLP_TX_RETRY|		\
+		 BRIDGE_ISR_LLP_TCTY)
+
+#define BRIDGE_ISR_PCIBUS_PIOERR	\
+		(BRIDGE_ISR_PCI_MST_TIMEOUT|BRIDGE_ISR_PCI_ABORT)
+
+#define BRIDGE_ISR_PCIBUS_ERROR		\
+		(BRIDGE_ISR_PCIBUS_PIOERR|BRIDGE_ISR_PCI_PERR|		\
+		 BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_RETRY_CNT|		\
+		 BRIDGE_ISR_PCI_PARITY)
+
+#define BRIDGE_ISR_XTALK_ERROR		\
+		(BRIDGE_ISR_XREAD_REQ_TIMEOUT|BRIDGE_ISR_XREQ_FIFO_OFLOW|\
+		 BRIDGE_ISR_UNSUPPORTED_XOP|BRIDGE_ISR_INVLD_ADDR|	\
+		 BRIDGE_ISR_REQ_XTLK_ERR|BRIDGE_ISR_RESP_XTLK_ERR|	\
+		 BRIDGE_ISR_BAD_XREQ_PKT|BRIDGE_ISR_BAD_XRESP_PKT|	\
+		 BRIDGE_ISR_UNEXP_RESP)
+
+#define BRIDGE_ISR_ERRORS		\
+		(BRIDGE_ISR_LINK_ERROR|BRIDGE_ISR_PCIBUS_ERROR|		\
+		 BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR|		\
+		 BRIDGE_ISR_PMU_ESIZE_FAULT)
+
+/*
+ * List of Errors which are fatal and kill the system
+ */
+#define BRIDGE_ISR_ERROR_FATAL		\
+		((BRIDGE_ISR_XTALK_ERROR & ~BRIDGE_ISR_XREAD_REQ_TIMEOUT)|\
+		 BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_PARITY )
+
+#define BRIDGE_ISR_ERROR_DUMP		\
+		(BRIDGE_ISR_PCIBUS_ERROR|BRIDGE_ISR_PMU_ESIZE_FAULT|	\
+		 BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR)
+
+/* Bridge interrupt enable register bits definition */
+#define BRIDGE_IMR_UNEXP_RESP		BRIDGE_ISR_UNEXP_RESP
+#define BRIDGE_IMR_PMU_ESIZE_FAULT	BRIDGE_ISR_PMU_ESIZE_FAULT
+#define BRIDGE_IMR_BAD_XRESP_PKT	BRIDGE_ISR_BAD_XRESP_PKT
+#define BRIDGE_IMR_BAD_XREQ_PKT		BRIDGE_ISR_BAD_XREQ_PKT
+#define BRIDGE_IMR_RESP_XTLK_ERR	BRIDGE_ISR_RESP_XTLK_ERR
+#define BRIDGE_IMR_REQ_XTLK_ERR		BRIDGE_ISR_REQ_XTLK_ERR
+#define BRIDGE_IMR_INVLD_ADDR		BRIDGE_ISR_INVLD_ADDR
+#define BRIDGE_IMR_UNSUPPORTED_XOP	BRIDGE_ISR_UNSUPPORTED_XOP
+#define BRIDGE_IMR_XREQ_FIFO_OFLOW	BRIDGE_ISR_XREQ_FIFO_OFLOW
+#define BRIDGE_IMR_LLP_REC_SNERR	BRIDGE_ISR_LLP_REC_SNERR
+#define BRIDGE_IMR_LLP_REC_CBERR	BRIDGE_ISR_LLP_REC_CBERR
+#define BRIDGE_IMR_LLP_RCTY		BRIDGE_ISR_LLP_RCTY
+#define BRIDGE_IMR_LLP_TX_RETRY		BRIDGE_ISR_LLP_TX_RETRY
+#define BRIDGE_IMR_LLP_TCTY		BRIDGE_ISR_LLP_TCTY
+#define BRIDGE_IMR_SSRAM_PERR		BRIDGE_ISR_SSRAM_PERR
+#define BRIDGE_IMR_PCI_ABORT		BRIDGE_ISR_PCI_ABORT
+#define BRIDGE_IMR_PCI_PARITY		BRIDGE_ISR_PCI_PARITY
+#define BRIDGE_IMR_PCI_SERR		BRIDGE_ISR_PCI_SERR
+#define BRIDGE_IMR_PCI_PERR		BRIDGE_ISR_PCI_PERR
+#define BRIDGE_IMR_PCI_MST_TIMEOUT	BRIDGE_ISR_PCI_MST_TIMEOUT
+#define BRIDGE_IMR_GIO_MST_TIMEOUT	BRIDGE_ISR_GIO_MST_TIMEOUT
+#define BRIDGE_IMR_PCI_RETRY_CNT	BRIDGE_ISR_PCI_RETRY_CNT
+#define BRIDGE_IMR_XREAD_REQ_TIMEOUT	BRIDGE_ISR_XREAD_REQ_TIMEOUT
+#define BRIDGE_IMR_GIO_B_ENBL_ERR	BRIDGE_ISR_GIO_B_ENBL_ERR
+#define BRIDGE_IMR_INT_MSK		BRIDGE_ISR_INT_MSK
+#define BRIDGE_IMR_INT(x)		BRIDGE_ISR_INT(x)
+
+/* Bridge interrupt reset register bits definition */
+#define BRIDGE_IRR_MULTI_CLR		(0x1 << 6)
+#define BRIDGE_IRR_CRP_GRP_CLR		(0x1 << 5)
+#define BRIDGE_IRR_RESP_BUF_GRP_CLR	(0x1 << 4)
+#define BRIDGE_IRR_REQ_DSP_GRP_CLR	(0x1 << 3)
+#define BRIDGE_IRR_LLP_GRP_CLR		(0x1 << 2)
+#define BRIDGE_IRR_SSRAM_GRP_CLR	(0x1 << 1)
+#define BRIDGE_IRR_PCI_GRP_CLR		(0x1 << 0)
+#define BRIDGE_IRR_GIO_GRP_CLR		(0x1 << 0)
+#define BRIDGE_IRR_ALL_CLR		0x7f
+
+#define BRIDGE_IRR_CRP_GRP		(BRIDGE_ISR_UNEXP_RESP | \
+					 BRIDGE_ISR_XREQ_FIFO_OFLOW)
+#define BRIDGE_IRR_RESP_BUF_GRP		(BRIDGE_ISR_BAD_XRESP_PKT | \
+					 BRIDGE_ISR_RESP_XTLK_ERR | \
+					 BRIDGE_ISR_XREAD_REQ_TIMEOUT)
+#define BRIDGE_IRR_REQ_DSP_GRP		(BRIDGE_ISR_UNSUPPORTED_XOP | \
+					 BRIDGE_ISR_BAD_XREQ_PKT | \
+					 BRIDGE_ISR_REQ_XTLK_ERR | \
+					 BRIDGE_ISR_INVLD_ADDR)
+#define BRIDGE_IRR_LLP_GRP		(BRIDGE_ISR_LLP_REC_SNERR | \
+					 BRIDGE_ISR_LLP_REC_CBERR | \
+					 BRIDGE_ISR_LLP_RCTY | \
+					 BRIDGE_ISR_LLP_TX_RETRY | \
+					 BRIDGE_ISR_LLP_TCTY)
+#define BRIDGE_IRR_SSRAM_GRP		(BRIDGE_ISR_SSRAM_PERR | \
+					 BRIDGE_ISR_PMU_ESIZE_FAULT)
+#define BRIDGE_IRR_PCI_GRP		(BRIDGE_ISR_PCI_ABORT | \
+					 BRIDGE_ISR_PCI_PARITY | \
+					 BRIDGE_ISR_PCI_SERR | \
+					 BRIDGE_ISR_PCI_PERR | \
+					 BRIDGE_ISR_PCI_MST_TIMEOUT | \
+					 BRIDGE_ISR_PCI_RETRY_CNT)
+
+#define BRIDGE_IRR_GIO_GRP		(BRIDGE_ISR_GIO_B_ENBL_ERR | \
+					 BRIDGE_ISR_GIO_MST_TIMEOUT)
+
+/* Bridge INT_DEV register bits definition */
+#define BRIDGE_INT_DEV_SHFT(n)		((n)*3)
+#define BRIDGE_INT_DEV_MASK(n)		(0x7 << BRIDGE_INT_DEV_SHFT(n))
+#define BRIDGE_INT_DEV_SET(_dev, _line) (_dev << BRIDGE_INT_DEV_SHFT(_line))
+
+/* Bridge interrupt(x) register bits definition */
+#define BRIDGE_INT_ADDR_HOST		0x0003FF00
+#define BRIDGE_INT_ADDR_FLD		0x000000FF
+
+#define BRIDGE_TMO_PCI_RETRY_HLD_MASK	0x1f0000
+#define BRIDGE_TMO_GIO_TIMEOUT_MASK	0x001000
+#define BRIDGE_TMO_PCI_RETRY_CNT_MASK	0x0003ff
+
+#define BRIDGE_TMO_PCI_RETRY_CNT_MAX	0x3ff
+
+/*
+ * The NASID should be shifted by this amount and stored into the
+ * interrupt(x) register.
+ */
+#define BRIDGE_INT_ADDR_NASID_SHFT	8
+
+/*
+ * The BRIDGE_INT_ADDR_DEST_IO bit should be set to send an interrupt to
+ * memory.
+ */
+#define BRIDGE_INT_ADDR_DEST_IO		(1 << 17)
+#define BRIDGE_INT_ADDR_DEST_MEM	0
+#define BRIDGE_INT_ADDR_MASK		(1 << 17)
+
+/* Bridge device(x) register bits definition */
+#define BRIDGE_DEV_ERR_LOCK_EN		0x10000000
+#define BRIDGE_DEV_PAGE_CHK_DIS		0x08000000
+#define BRIDGE_DEV_FORCE_PCI_PAR	0x04000000
+#define BRIDGE_DEV_VIRTUAL_EN		0x02000000
+#define BRIDGE_DEV_PMU_WRGA_EN		0x01000000
+#define BRIDGE_DEV_DIR_WRGA_EN		0x00800000
+#define BRIDGE_DEV_DEV_SIZE		0x00400000
+#define BRIDGE_DEV_RT			0x00200000
+#define BRIDGE_DEV_SWAP_PMU		0x00100000
+#define BRIDGE_DEV_SWAP_DIR		0x00080000
+#define BRIDGE_DEV_PREF			0x00040000
+#define BRIDGE_DEV_PRECISE		0x00020000
+#define BRIDGE_DEV_COH			0x00010000
+#define BRIDGE_DEV_BARRIER		0x00008000
+#define BRIDGE_DEV_GBR			0x00004000
+#define BRIDGE_DEV_DEV_SWAP		0x00002000
+#define BRIDGE_DEV_DEV_IO_MEM		0x00001000
+#define BRIDGE_DEV_OFF_MASK		0x00000fff
+#define BRIDGE_DEV_OFF_ADDR_SHFT	20
+
+#define BRIDGE_DEV_PMU_BITS		(BRIDGE_DEV_PMU_WRGA_EN		| \
+					 BRIDGE_DEV_SWAP_PMU)
+#define BRIDGE_DEV_D32_BITS		(BRIDGE_DEV_DIR_WRGA_EN		| \
+					 BRIDGE_DEV_SWAP_DIR		| \
+					 BRIDGE_DEV_PREF		| \
+					 BRIDGE_DEV_PRECISE		| \
+					 BRIDGE_DEV_COH			| \
+					 BRIDGE_DEV_BARRIER)
+#define BRIDGE_DEV_D64_BITS		(BRIDGE_DEV_DIR_WRGA_EN		| \
+					 BRIDGE_DEV_SWAP_DIR		| \
+					 BRIDGE_DEV_COH			| \
+					 BRIDGE_DEV_BARRIER)
+
+/* Bridge Error Upper register bit field definition */
+#define BRIDGE_ERRUPPR_DEVMASTER	(0x1 << 20)	/* Device was master */
+#define BRIDGE_ERRUPPR_PCIVDEV		(0x1 << 19)	/* Virtual Req value */
+#define BRIDGE_ERRUPPR_DEVNUM_SHFT	(16)
+#define BRIDGE_ERRUPPR_DEVNUM_MASK	(0x7 << BRIDGE_ERRUPPR_DEVNUM_SHFT)
+#define BRIDGE_ERRUPPR_DEVICE(err)	(((err) >> BRIDGE_ERRUPPR_DEVNUM_SHFT) & 0x7)
+#define BRIDGE_ERRUPPR_ADDRMASK		(0xFFFF)
+
+/* Bridge interrupt mode register bits definition */
+#define BRIDGE_INTMODE_CLR_PKT_EN(x)	(0x1 << (x))
+
+/* this should be written to the xbow's link_control(x) register */
+#define BRIDGE_CREDIT	3
+
+/* RRB assignment register */
+#define	BRIDGE_RRB_EN	0x8	/* after shifting down */
+#define	BRIDGE_RRB_DEV	0x7	/* after shifting down */
+#define	BRIDGE_RRB_VDEV	0x4	/* after shifting down */
+#define	BRIDGE_RRB_PDEV	0x3	/* after shifting down */
+
+/* RRB status register */
+#define	BRIDGE_RRB_VALID(r)	(0x00010000<<(r))
+#define	BRIDGE_RRB_INUSE(r)	(0x00000001<<(r))
+
+/* RRB clear register */
+#define	BRIDGE_RRB_CLEAR(r)	(0x00000001<<(r))
+
+/* xbox system controller declarations */
+#define XBOX_BRIDGE_WID         8
+#define FLASH_PROM1_BASE        0xE00000 /* To read the xbox sysctlr status */
+#define XBOX_RPS_EXISTS		1 << 6	 /* RPS bit in status register */
+#define XBOX_RPS_FAIL		1 << 4	 /* RPS status bit in register */
+
+/* ========================================================================
+ */
+/*
+ * Macros for Xtalk to Bridge bus (PCI/GIO) PIO
+ * refer to section 4.2.1 of Bridge Spec for xtalk to PCI/GIO PIO mappings
+ */
+/* XTALK addresses that map into Bridge Bus addr space */
+#define BRIDGE_PIO32_XTALK_ALIAS_BASE	0x000040000000L
+#define BRIDGE_PIO32_XTALK_ALIAS_LIMIT	0x00007FFFFFFFL
+#define BRIDGE_PIO64_XTALK_ALIAS_BASE	0x000080000000L
+#define BRIDGE_PIO64_XTALK_ALIAS_LIMIT	0x0000BFFFFFFFL
+#define BRIDGE_PCIIO_XTALK_ALIAS_BASE	0x000100000000L
+#define BRIDGE_PCIIO_XTALK_ALIAS_LIMIT	0x0001FFFFFFFFL
+
+/* Ranges of PCI bus space that can be accessed via PIO from xtalk */
+#define BRIDGE_MIN_PIO_ADDR_MEM		0x00000000	/* 1G PCI memory space */
+#define BRIDGE_MAX_PIO_ADDR_MEM		0x3fffffff
+#define BRIDGE_MIN_PIO_ADDR_IO		0x00000000	/* 4G PCI IO space */
+#define BRIDGE_MAX_PIO_ADDR_IO		0xffffffff
+
+/* XTALK addresses that map into PCI addresses */
+#define BRIDGE_PCI_MEM32_BASE		BRIDGE_PIO32_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_MEM32_LIMIT		BRIDGE_PIO32_XTALK_ALIAS_LIMIT
+#define BRIDGE_PCI_MEM64_BASE		BRIDGE_PIO64_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_MEM64_LIMIT		BRIDGE_PIO64_XTALK_ALIAS_LIMIT
+#define BRIDGE_PCI_IO_BASE		BRIDGE_PCIIO_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_IO_LIMIT		BRIDGE_PCIIO_XTALK_ALIAS_LIMIT
+
+/*
+ * Macros for Bridge bus (PCI/GIO) to Xtalk DMA
+ */
+/* Bridge Bus DMA addresses */
+#define BRIDGE_LOCAL_BASE		0
+#define BRIDGE_DMA_MAPPED_BASE		0x40000000
+#define BRIDGE_DMA_MAPPED_SIZE		0x40000000	/* 1G Bytes */
+#define BRIDGE_DMA_DIRECT_BASE		0x80000000
+#define BRIDGE_DMA_DIRECT_SIZE		0x80000000	/* 2G Bytes */
+
+#define PCI32_LOCAL_BASE		BRIDGE_LOCAL_BASE
+
+/* PCI addresses of regions decoded by Bridge for DMA */
+#define PCI32_MAPPED_BASE		BRIDGE_DMA_MAPPED_BASE
+#define PCI32_DIRECT_BASE		BRIDGE_DMA_DIRECT_BASE
+
+#define IS_PCI32_LOCAL(x)	((ulong_t)(x) < PCI32_MAPPED_BASE)
+#define IS_PCI32_MAPPED(x)	((ulong_t)(x) < PCI32_DIRECT_BASE && \
+					(ulong_t)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI32_DIRECT(x)	((ulong_t)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI64(x)		((ulong_t)(x) >= PCI64_BASE)
+
+/*
+ * The GIO address space.
+ */
+/* Xtalk to GIO PIO */
+#define BRIDGE_GIO_MEM32_BASE		BRIDGE_PIO32_XTALK_ALIAS_BASE
+#define BRIDGE_GIO_MEM32_LIMIT		BRIDGE_PIO32_XTALK_ALIAS_LIMIT
+
+#define GIO_LOCAL_BASE			BRIDGE_LOCAL_BASE
+
+/* GIO addresses of regions decoded by Bridge for DMA */
+#define GIO_MAPPED_BASE			BRIDGE_DMA_MAPPED_BASE
+#define GIO_DIRECT_BASE			BRIDGE_DMA_DIRECT_BASE
+
+#define IS_GIO_LOCAL(x)		((ulong_t)(x) < GIO_MAPPED_BASE)
+#define IS_GIO_MAPPED(x)	((ulong_t)(x) < GIO_DIRECT_BASE && \
+					(ulong_t)(x) >= GIO_MAPPED_BASE)
+#define IS_GIO_DIRECT(x)	((ulong_t)(x) >= GIO_MAPPED_BASE)
+
+/* PCI to xtalk mapping */
+
+/* given a DIR_OFF value and a pci/gio 32 bits direct address, determine
+ * which xtalk address is accessed
+ */
+#define BRIDGE_DIRECT_32_SEG_SIZE	BRIDGE_DMA_DIRECT_SIZE
+#define BRIDGE_DIRECT_32_TO_XTALK(dir_off,adr)		\
+	((dir_off) * BRIDGE_DIRECT_32_SEG_SIZE +	\
+		((adr) & (BRIDGE_DIRECT_32_SEG_SIZE - 1)) + PHYS_RAMBASE)
+
+/* 64-bit address attribute masks */
+#define PCI64_ATTR_TARG_MASK	0xf000000000000000
+#define PCI64_ATTR_TARG_SHFT	60
+#define PCI64_ATTR_PREF		0x0800000000000000
+#define PCI64_ATTR_PREC		0x0400000000000000
+#define PCI64_ATTR_VIRTUAL	0x0200000000000000
+#define PCI64_ATTR_BAR		0x0100000000000000
+#define PCI64_ATTR_RMF_MASK	0x00ff000000000000
+#define PCI64_ATTR_RMF_SHFT	48
+
+#ifndef __ASSEMBLY__
+/* Address translation entry for mapped pci32 accesses */
+typedef union ate_u {
+	u64	ent;
+	struct ate_s {
+		u64	rmf:16;
+		u64	addr:36;
+		u64	targ:4;
+		u64	reserved:3;
+		u64	barrier:1;
+		u64	prefetch:1;
+		u64	precise:1;
+		u64	coherent:1;
+		u64	valid:1;
+	} field;
+} ate_t;
+#endif /* !__ASSEMBLY__ */
+
+#define ATE_V		0x01
+#define ATE_CO		0x02
+#define ATE_PREC	0x04
+#define ATE_PREF	0x08
+#define ATE_BAR		0x10
+
+#define ATE_PFNSHIFT		12
+#define ATE_TIDSHIFT		8
+#define ATE_RMFSHIFT		48
+
+#define mkate(xaddr, xid, attr) ((xaddr) & 0x0000fffffffff000ULL) | \
+				((xid)<<ATE_TIDSHIFT) | \
+				(attr)
+
+#define BRIDGE_INTERNAL_ATES	128
+
+struct bridge_controller {
+	struct pci_controller	pc;
+	struct resource		mem;
+	struct resource		io;
+	bridge_t		*base;
+	nasid_t			nasid;
+	unsigned int		widget_id;
+	unsigned int 		irq_cpu;
+	dma64_addr_t		baddr;
+	unsigned int		pci_int[8];
+};
+
+#define BRIDGE_CONTROLLER(bus) \
+	((struct bridge_controller *)((bus)->sysdata))
+
+extern void register_bridge_irq(unsigned int irq);
+extern int request_bridge_irq(struct bridge_controller *bc);
+
+extern struct pci_ops bridge_pci_ops;
+
+#endif /* _ASM_PCI_BRIDGE_H */
diff --git a/arch/mips/include/asm/percpu.h b/arch/mips/include/asm/percpu.h
new file mode 100644
index 0000000..844e763
--- /dev/null
+++ b/arch/mips/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_PERCPU_H
+#define __ASM_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ASM_PERCPU_H */
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
new file mode 100644
index 0000000..1275831
--- /dev/null
+++ b/arch/mips/include/asm/pgalloc.h
@@ -0,0 +1,143 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2001, 2003 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <linux/highmem.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+	pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+	pgtable_t pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Initialize a new pmd table with invalid pointers.
+ */
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+#ifdef CONFIG_64BIT
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	set_pud(pud, __pud((unsigned long)pmd));
+}
+#endif
+
+/*
+ * Initialize a new pgd / pmd table with invalid pointers.
+ */
+extern void pgd_init(unsigned long page);
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *ret, *init;
+
+	ret = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER);
+	if (ret) {
+		init = pgd_offset(&init_mm, 0UL);
+		pgd_init((unsigned long)ret);
+		memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
+		       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+	}
+
+	return ret;
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_pages((unsigned long)pgd, PGD_ORDER);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+	unsigned long address)
+{
+	pte_t *pte;
+
+	pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, PTE_ORDER);
+
+	return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+	unsigned long address)
+{
+	struct page *pte;
+
+	pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER);
+	if (pte) {
+		clear_highpage(pte);
+		pgtable_page_ctor(pte);
+	}
+	return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_pages((unsigned long)pte, PTE_ORDER);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_pages(pte, PTE_ORDER);
+}
+
+#define __pte_free_tlb(tlb,pte)				\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb), pte);			\
+} while (0)
+
+#ifdef CONFIG_32BIT
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pmd_free(mm, x)			do { } while (0)
+#define __pmd_free_tlb(tlb, x)		do { } while (0)
+
+#endif
+
+#ifdef CONFIG_64BIT
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pmd_t *pmd;
+
+	pmd = (pmd_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, PMD_ORDER);
+	if (pmd)
+		pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table);
+	return pmd;
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	free_pages((unsigned long)pmd, PMD_ORDER);
+}
+
+#define __pmd_free_tlb(tlb, x)	pmd_free((tlb)->mm, x)
+
+#endif
+
+#define check_pgt_cache()	do { } while (0)
+
+extern void pagetable_init(void);
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
new file mode 100644
index 0000000..55813d6
--- /dev/null
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -0,0 +1,234 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGTABLE_32_H
+#define _ASM_PGTABLE_32_H
+
+#include <asm/addrspace.h>
+#include <asm/page.h>
+
+#include <linux/linkage.h>
+#include <asm/cachectl.h>
+#include <asm/fixmap.h>
+
+#include <asm-generic/pgtable-nopmd.h>
+
+/*
+ * - add_wired_entry() add a fixed TLB entry, and move wired register
+ */
+extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+			       unsigned long entryhi, unsigned long pagemask);
+
+/*
+ * - add_temporary_entry() add a temporary TLB entry. We use TLB entries
+ *	starting at the top and working down. This is for populating the
+ *	TLB before trap_init() puts the TLB miss handler in place. It
+ *	should be used only for entries matching the actual page tables,
+ *	to prevent inconsistencies.
+ */
+extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
+			       unsigned long entryhi, unsigned long pagemask);
+
+
+/* Basically we have the same two-level (which is the logical three level
+ * Linux page table layout folded) page tables as the i386.  Some day
+ * when we have proper page coloring support we can have a 1% quicker
+ * tlb refill handling mechanism, but for now it is a bit slower but
+ * works even with the cache aliasing problem the R4k and above have.
+ */
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(2 * PAGE_SHIFT + PTE_ORDER - PTE_T_LOG2)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * Entries per page directory level: we use two-level, so
+ * we don't really have any PUD/PMD directory physically.
+ */
+#define __PGD_ORDER	(32 - 3 * PAGE_SHIFT + PGD_T_LOG2 + PTE_T_LOG2)
+#define PGD_ORDER	(__PGD_ORDER >= 0 ? __PGD_ORDER : 0)
+#define PUD_ORDER	aieeee_attempt_to_allocate_pud
+#define PMD_ORDER	1
+#define PTE_ORDER	0
+
+#define PTRS_PER_PGD	(USER_PTRS_PER_PGD * 2)
+#define PTRS_PER_PTE	((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
+
+#define USER_PTRS_PER_PGD	(0x80000000UL/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#define VMALLOC_START     MAP_BASE
+
+#define PKMAP_BASE		(0xfe000000UL)
+
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END	(PKMAP_BASE-2*PAGE_SIZE)
+#else
+# define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+#endif
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
+#else
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#endif
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern void load_pgd(unsigned long pg_dir);
+
+extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
+
+/*
+ * Empty pgd/pmd entries point to the invalid_pte_table.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+	return pmd_val(pmd) == (unsigned long) invalid_pte_table;
+}
+
+#define pmd_bad(pmd)		(pmd_val(pmd) & ~PAGE_MASK)
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_val(pmd) != (unsigned long) invalid_pte_table;
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
+}
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+#define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
+static inline pte_t
+pfn_pte(unsigned long pfn, pgprot_t prot)
+{
+	pte_t pte;
+	pte.pte_high = (pfn << 6) | (pgprot_val(prot) & 0x3f);
+	pte.pte_low = pgprot_val(prot);
+	return pte;
+}
+
+#else
+
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#ifdef CONFIG_CPU_VR41XX
+#define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
+#else
+#define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
+#define pfn_pte(pfn, prot)	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#endif
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+
+#define __pgd_offset(address)	pgd_index(address)
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, addr)	((mm)->pgd + pgd_index(addr))
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address)						\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_kernel(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+
+#define pte_offset_map(dir, address)                                    \
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address)                             \
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_unmap(pte) ((void)(pte))
+#define pte_unmap_nested(pte) ((void)(pte))
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+/* Swap entries must have VALID bit cleared. */
+#define __swp_type(x)		(((x).val >> 10) & 0x1f)
+#define __swp_offset(x)		((x).val >> 15)
+#define __swp_entry(type,offset)	\
+	((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
+
+/*
+ * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS	28
+
+#define pte_to_pgoff(_pte)	((((_pte).pte >> 1 ) & 0x07) | \
+				 (((_pte).pte >> 2 ) & 0x38) | \
+				 (((_pte).pte >> 10) <<  6 ))
+
+#define pgoff_to_pte(off)	((pte_t) { (((off) & 0x07) << 1 ) | \
+					   (((off) & 0x38) << 2 ) | \
+					   (((off) >>  6 ) << 10) | \
+					   _PAGE_FILE })
+
+#else
+
+/* Swap entries must have VALID and GLOBAL bits cleared. */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __swp_type(x)		(((x).val >> 2) & 0x1f)
+#define __swp_offset(x) 	 ((x).val >> 7)
+#define __swp_entry(type,offset)	\
+		((swp_entry_t)  { ((type) << 2) | ((offset) << 7) })
+#else
+#define __swp_type(x)		(((x).val >> 8) & 0x1f)
+#define __swp_offset(x) 	 ((x).val >> 13)
+#define __swp_entry(type,offset)	\
+		((swp_entry_t)  { ((type) << 8) | ((offset) << 13) })
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+/*
+ * Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
+ */
+#define PTE_FILE_MAX_BITS	30
+
+#define pte_to_pgoff(_pte)	((_pte).pte_high >> 2)
+#define pgoff_to_pte(off) 	((pte_t) { _PAGE_FILE, (off) << 2 })
+
+#else
+/*
+ * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS	28
+
+#define pte_to_pgoff(_pte)	((((_pte).pte >> 1) & 0x7) | \
+				 (((_pte).pte >> 2) & 0x8) | \
+				 (((_pte).pte >> 8) <<  4))
+
+#define pgoff_to_pte(off)	((pte_t) { (((off) & 0x7) << 1) | \
+					   (((off) & 0x8) << 2) | \
+					   (((off) >>  4) << 8) | \
+					   _PAGE_FILE })
+#endif
+
+#endif
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
+#define __swp_entry_to_pte(x)	((pte_t) { 0, (x).val })
+#else
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+#endif
+
+#endif /* _ASM_PGTABLE_32_H */
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
new file mode 100644
index 0000000..943515f
--- /dev/null
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -0,0 +1,253 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGTABLE_64_H
+#define _ASM_PGTABLE_64_H
+
+#include <linux/linkage.h>
+
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/cachectl.h>
+#include <asm/fixmap.h>
+
+#include <asm-generic/pgtable-nopud.h>
+
+/*
+ * Each address space has 2 4K pages as its page directory, giving 1024
+ * (== PTRS_PER_PGD) 8 byte pointers to pmd tables. Each pmd table is a
+ * single 4K page, giving 512 (== PTRS_PER_PMD) 8 byte pointers to page
+ * tables. Each page table is also a single 4K page, giving 512 (==
+ * PTRS_PER_PTE) 8 byte ptes. Each pud entry is initialized to point to
+ * invalid_pmd_table, each pmd entry is initialized to point to
+ * invalid_pte_table, each pte is initialized to 0. When memory is low,
+ * and a pmd table or a page table allocation fails, empty_bad_pmd_table
+ * and empty_bad_page_table is returned back to higher layer code, so
+ * that the failure is recognized later on. Linux does not seem to
+ * handle these failures very well though. The empty_bad_page_table has
+ * invalid pte entries in it, to force page faults.
+ *
+ * Kernel mappings: kernel mappings are held in the swapper_pg_table.
+ * The layout is identical to userspace except it's indexed with the
+ * fault address - VMALLOC_START.
+ */
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * For 4kB page size we use a 3 level page tree and an 8kB pud, which
+ * permits us mapping 40 bits of virtual address space.
+ *
+ * We used to implement 41 bits by having an order 1 pmd level but that seemed
+ * rather pointless.
+ *
+ * For 8kB page size we use a 3 level page tree which permits a total of
+ * 8TB of address space.  Alternatively a 33-bit / 8GB organization using
+ * two levels would be easy to implement.
+ *
+ * For 16kB page size we use a 2 level page tree which permits a total of
+ * 36 bits of virtual address space.  We could add a third level but it seems
+ * like at the moment there's no need for this.
+ *
+ * For 64kB page size we use a 2 level page table tree for a total of 42 bits
+ * of virtual address space.
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PGD_ORDER		1
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+
+#define PTRS_PER_PGD	((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#define PTRS_PER_PMD	((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t))
+#define PTRS_PER_PTE	((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
+
+#if PGDIR_SIZE >= TASK_SIZE
+#define USER_PTRS_PER_PGD       (1)
+#else
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#endif
+#define FIRST_USER_ADDRESS	0UL
+
+#define VMALLOC_START		MAP_BASE
+#define VMALLOC_END	\
+	(VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE)
+#if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \
+	VMALLOC_START != CKSSEG
+/* Load modules into 32bit-compatible segment. */
+#define MODULE_START	CKSSEG
+#define MODULE_END	(FIXADDR_START-2*PAGE_SIZE)
+extern pgd_t module_pg_dir[PTRS_PER_PGD];
+#endif
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern pte_t invalid_pte_table[PTRS_PER_PTE];
+extern pte_t empty_bad_page_table[PTRS_PER_PTE];
+extern pmd_t invalid_pmd_table[PTRS_PER_PMD];
+extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD];
+
+/*
+ * Empty pgd/pmd entries point to the invalid_pte_table.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+	return pmd_val(pmd) == (unsigned long) invalid_pte_table;
+}
+
+#define pmd_bad(pmd)		(pmd_val(pmd) & ~PAGE_MASK)
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_val(pmd) != (unsigned long) invalid_pte_table;
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
+}
+
+/*
+ * Empty pud entries point to the invalid_pmd_table.
+ */
+static inline int pud_none(pud_t pud)
+{
+	return pud_val(pud) == (unsigned long) invalid_pmd_table;
+}
+
+static inline int pud_bad(pud_t pud)
+{
+	return pud_val(pud) & ~PAGE_MASK;
+}
+
+static inline int pud_present(pud_t pud)
+{
+	return pud_val(pud) != (unsigned long) invalid_pmd_table;
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	pud_val(*pudp) = ((unsigned long) invalid_pmd_table);
+}
+
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#ifdef CONFIG_CPU_VR41XX
+#define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
+#else
+#define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#endif
+
+#define __pgd_offset(address)	pgd_index(address)
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	pmd_index(address)
+
+/* to find an entry in a kernel page-table-directory */
+#ifdef MODULE_START
+#define pgd_offset_k(address) \
+	((address) >= MODULE_START ? module_pg_dir : pgd_offset(&init_mm, 0UL))
+#else
+#define pgd_offset_k(address) pgd_offset(&init_mm, 0UL)
+#endif
+
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pmd_index(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, addr)	((mm)->pgd + pgd_index(addr))
+
+static inline unsigned long pud_page_vaddr(pud_t pud)
+{
+	return pud_val(pud);
+}
+#define pud_phys(pud)		virt_to_phys((void *)pud_val(pud))
+#define pud_page(pud)		(pfn_to_page(pud_phys(pud) >> PAGE_SHIFT))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address)
+{
+	return (pmd_t *) pud_page_vaddr(*pud) + pmd_index(address);
+}
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address)						\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_kernel(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_map(dir, address)					\
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address)				\
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_unmap(pte) ((void)(pte))
+#define pte_unmap_nested(pte) ((void)(pte))
+
+/*
+ * Initialize a new pgd / pmd table with invalid pointers.
+ */
+extern void pgd_init(unsigned long page);
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+/*
+ * Non-present pages:  high 24 bits are offset, next 8 bits type,
+ * low 32 bits zero.
+ */
+static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
+{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
+
+#define __swp_type(x)		(((x).val >> 32) & 0xff)
+#define __swp_offset(x)		((x).val >> 40)
+#define __swp_entry(type, offset) ((swp_entry_t) { pte_val(mk_swap_pte((type), (offset))) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+/*
+ * Bits 0, 4, 6, and 7 are taken. Let's leave bits 1, 2, 3, and 5 alone to
+ * make things easier, and only use the upper 56 bits for the page offset...
+ */
+#define PTE_FILE_MAX_BITS	56
+
+#define pte_to_pgoff(_pte)	((_pte).pte >> 8)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 8) | _PAGE_FILE })
+
+#endif /* _ASM_PGTABLE_64_H */
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
new file mode 100644
index 0000000..51b34a4
--- /dev/null
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -0,0 +1,137 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2002 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ * Copyright (C) 2002  Maciej W. Rozycki
+ */
+#ifndef _ASM_PGTABLE_BITS_H
+#define _ASM_PGTABLE_BITS_H
+
+
+/*
+ * Note that we shift the lower 32bits of each EntryLo[01] entry
+ * 6 bits to the left. That way we can convert the PFN into the
+ * physical address by a single 'and' operation and gain 6 additional
+ * bits for storing information which isn't present in a normal
+ * MIPS page table.
+ *
+ * Similar to the Alpha port, we need to keep track of the ref
+ * and mod bits in software.  We have a software "yeah you can read
+ * from this page" bit, and a hardware one which actually lets the
+ * process read from the page.  On the same token we have a software
+ * writable bit and the real hardware one which actually lets the
+ * process write to the page, this keeps a mod bit via the hardware
+ * dirty bit.
+ *
+ * Certain revisions of the R4000 and R5000 have a bug where if a
+ * certain sequence occurs in the last 3 instructions of an executable
+ * page, and the following page is not mapped, the cpu can do
+ * unpredictable things.  The code (when it is written) to deal with
+ * this problem will be in the update_mmu_cache() code for the r4k.
+ */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+
+#define _PAGE_PRESENT               (1<<6)  /* implemented in software */
+#define _PAGE_READ                  (1<<7)  /* implemented in software */
+#define _PAGE_WRITE                 (1<<8)  /* implemented in software */
+#define _PAGE_ACCESSED              (1<<9)  /* implemented in software */
+#define _PAGE_MODIFIED              (1<<10) /* implemented in software */
+#define _PAGE_FILE                  (1<<10) /* set:pagecache unset:swap */
+
+#define _PAGE_R4KBUG                (1<<0)  /* workaround for r4k bug  */
+#define _PAGE_GLOBAL                (1<<0)
+#define _PAGE_VALID                 (1<<1)
+#define _PAGE_SILENT_READ           (1<<1)  /* synonym                 */
+#define _PAGE_DIRTY                 (1<<2)  /* The MIPS dirty bit      */
+#define _PAGE_SILENT_WRITE          (1<<2)
+#define _CACHE_SHIFT                3
+#define _CACHE_MASK                 (7<<3)
+
+#else
+
+#define _PAGE_PRESENT               (1<<0)  /* implemented in software */
+#define _PAGE_READ                  (1<<1)  /* implemented in software */
+#define _PAGE_WRITE                 (1<<2)  /* implemented in software */
+#define _PAGE_ACCESSED              (1<<3)  /* implemented in software */
+#define _PAGE_MODIFIED              (1<<4)  /* implemented in software */
+#define _PAGE_FILE                  (1<<4)  /* set:pagecache unset:swap */
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define _PAGE_GLOBAL                (1<<8)
+#define _PAGE_VALID                 (1<<9)
+#define _PAGE_SILENT_READ           (1<<9)  /* synonym                 */
+#define _PAGE_DIRTY                 (1<<10) /* The MIPS dirty bit      */
+#define _PAGE_SILENT_WRITE          (1<<10)
+#define _CACHE_UNCACHED             (1<<11)
+#define _CACHE_MASK                 (1<<11)
+
+#else
+
+#define _PAGE_R4KBUG                (1<<5)  /* workaround for r4k bug  */
+#define _PAGE_GLOBAL                (1<<6)
+#define _PAGE_VALID                 (1<<7)
+#define _PAGE_SILENT_READ           (1<<7)  /* synonym                 */
+#define _PAGE_DIRTY                 (1<<8)  /* The MIPS dirty bit      */
+#define _PAGE_SILENT_WRITE          (1<<8)
+#define _CACHE_SHIFT		    9
+#define _CACHE_MASK                 (7<<9)
+
+#endif
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */
+
+
+/*
+ * Cache attributes
+ */
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define _CACHE_CACHABLE_NONCOHERENT 0
+
+#elif defined(CONFIG_CPU_SB1)
+
+/* No penalty for being coherent on the SB1, so just
+   use it for "noncoherent" spaces, too.  Shouldn't hurt. */
+
+#define _CACHE_UNCACHED             (2<<_CACHE_SHIFT)
+#define _CACHE_CACHABLE_COW         (5<<_CACHE_SHIFT)
+#define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT)
+#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)
+
+#elif defined(CONFIG_CPU_RM9000)
+
+#define _CACHE_WT		    (0<<_CACHE_SHIFT)
+#define _CACHE_WTWA		    (1<<_CACHE_SHIFT)
+#define _CACHE_UC_B		    (2<<_CACHE_SHIFT)
+#define _CACHE_WB		    (3<<_CACHE_SHIFT)
+#define _CACHE_CWBEA		    (4<<_CACHE_SHIFT)
+#define _CACHE_CWB		    (5<<_CACHE_SHIFT)
+#define _CACHE_UCNB		    (6<<_CACHE_SHIFT)
+#define _CACHE_FPC		    (7<<_CACHE_SHIFT)
+
+#define _CACHE_UNCACHED		    _CACHE_UC_B
+#define _CACHE_CACHABLE_NONCOHERENT _CACHE_WB
+
+#else
+
+#define _CACHE_CACHABLE_NO_WA	    (0<<_CACHE_SHIFT)  /* R4600 only      */
+#define _CACHE_CACHABLE_WA	    (1<<_CACHE_SHIFT)  /* R4600 only      */
+#define _CACHE_UNCACHED             (2<<_CACHE_SHIFT)  /* R4[0246]00      */
+#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT)  /* R4[0246]00      */
+#define _CACHE_CACHABLE_CE          (4<<_CACHE_SHIFT)  /* R4[04]00MC only */
+#define _CACHE_CACHABLE_COW         (5<<_CACHE_SHIFT)  /* R4[04]00MC only */
+#define _CACHE_CACHABLE_COHERENT    (5<<_CACHE_SHIFT)  /* MIPS32R2 CMP    */
+#define _CACHE_CACHABLE_CUW         (6<<_CACHE_SHIFT)  /* R4[04]00MC only */
+#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)  /* R10000 only     */
+
+#endif
+
+#define __READABLE	(_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
+#define __WRITEABLE	(_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
+
+#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
+
+#endif /* _ASM_PGTABLE_BITS_H */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
new file mode 100644
index 0000000..6a0edf7
--- /dev/null
+++ b/arch/mips/include/asm/pgtable.h
@@ -0,0 +1,383 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#ifdef CONFIG_32BIT
+#include <asm/pgtable-32.h>
+#endif
+#ifdef CONFIG_64BIT
+#include <asm/pgtable-64.h>
+#endif
+
+#include <asm/io.h>
+#include <asm/pgtable-bits.h>
+
+struct mm_struct;
+struct vm_area_struct;
+
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _page_cachable_default)
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_READ | \
+				 _page_cachable_default)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_READ | \
+				 _page_cachable_default)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
+				 _PAGE_GLOBAL | _page_cachable_default)
+#define PAGE_USERIO	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _page_cachable_default)
+#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \
+			__WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED)
+
+/*
+ * MIPS can't do page protection for execute, and considers that the same like
+ * read. Also, write permissions imply read permissions. This is the closest
+ * we can get by reasonable means..
+ */
+
+/*
+ * Dummy values to fill the table in mmap.c
+ * The real values will be generated at runtime
+ */
+#define __P000 __pgprot(0)
+#define __P001 __pgprot(0)
+#define __P010 __pgprot(0)
+#define __P011 __pgprot(0)
+#define __P100 __pgprot(0)
+#define __P101 __pgprot(0)
+#define __P110 __pgprot(0)
+#define __P111 __pgprot(0)
+
+#define __S000 __pgprot(0)
+#define __S001 __pgprot(0)
+#define __S010 __pgprot(0)
+#define __S011 __pgprot(0)
+#define __S100 __pgprot(0)
+#define __S101 __pgprot(0)
+#define __S110 __pgprot(0)
+#define __S111 __pgprot(0)
+
+extern unsigned long _page_cachable_default;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero; used
+ * for zero-mapped memory areas etc..
+ */
+
+extern unsigned long empty_zero_page;
+extern unsigned long zero_page_mask;
+
+#define ZERO_PAGE(vaddr) \
+	(virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask))))
+
+extern void paging_init(void);
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define pmd_phys(pmd)		virt_to_phys((void *)pmd_val(pmd))
+#define pmd_page(pmd)		(pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
+#define pmd_page_vaddr(pmd)	pmd_val(pmd)
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+
+#define pte_none(pte)		(!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
+#define pte_present(pte)	((pte).pte_low & _PAGE_PRESENT)
+
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+	//printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low);
+
+	if (pte.pte_low & _PAGE_GLOBAL) {
+		pte_t *buddy = ptep_buddy(ptep);
+		/*
+		 * Make sure the buddy is global too (if it's !none,
+		 * it better already be global)
+		 */
+		if (pte_none(*buddy)) {
+			buddy->pte_low  |= _PAGE_GLOBAL;
+			buddy->pte_high |= _PAGE_GLOBAL;
+		}
+	}
+}
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_t null = __pte(0);
+
+	/* Preserve global status for the pair */
+	if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL)
+		null.pte_low = null.pte_high = _PAGE_GLOBAL;
+
+	set_pte_at(mm, addr, ptep, null);
+}
+#else
+
+#define pte_none(pte)		(!(pte_val(pte) & ~_PAGE_GLOBAL))
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+/*
+ * Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+	*ptep = pteval;
+#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX)
+	if (pte_val(pteval) & _PAGE_GLOBAL) {
+		pte_t *buddy = ptep_buddy(ptep);
+		/*
+		 * Make sure the buddy is global too (if it's !none,
+		 * it better already be global)
+		 */
+		if (pte_none(*buddy))
+			pte_val(*buddy) = pte_val(*buddy) | _PAGE_GLOBAL;
+	}
+#endif
+}
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX)
+	/* Preserve global status for the pair */
+	if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL)
+		set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL));
+	else
+#endif
+		set_pte_at(mm, addr, ptep, __pte(0));
+}
+#endif
+
+/*
+ * (pmds are folded into puds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0)
+
+#ifdef CONFIG_64BIT
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
+#endif
+
+#define PGD_T_LOG2	(__builtin_ffs(sizeof(pgd_t)) - 1)
+#define PMD_T_LOG2	(__builtin_ffs(sizeof(pmd_t)) - 1)
+#define PTE_T_LOG2	(__builtin_ffs(sizeof(pte_t)) - 1)
+
+/*
+ * We used to declare this array with size but gcc 3.3 and older are not able
+ * to find that this expression is a constant, so the size is dropped.
+ */
+extern pgd_t swapper_pg_dir[];
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+static inline int pte_write(pte_t pte)	{ return pte.pte_low & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte)	{ return pte.pte_low & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte)	{ return pte.pte_low & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)	{ return pte.pte_low & _PAGE_FILE; }
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte.pte_low  &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+	pte.pte_high &= ~_PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte.pte_low  &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
+	pte.pte_high &= ~_PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	pte.pte_low  &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
+	pte.pte_high &= ~_PAGE_SILENT_READ;
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte.pte_low |= _PAGE_WRITE;
+	if (pte.pte_low & _PAGE_MODIFIED) {
+		pte.pte_low  |= _PAGE_SILENT_WRITE;
+		pte.pte_high |= _PAGE_SILENT_WRITE;
+	}
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte.pte_low |= _PAGE_MODIFIED;
+	if (pte.pte_low & _PAGE_WRITE) {
+		pte.pte_low  |= _PAGE_SILENT_WRITE;
+		pte.pte_high |= _PAGE_SILENT_WRITE;
+	}
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte.pte_low |= _PAGE_ACCESSED;
+	if (pte.pte_low & _PAGE_READ) {
+		pte.pte_low  |= _PAGE_SILENT_READ;
+		pte.pte_high |= _PAGE_SILENT_READ;
+	}
+	return pte;
+}
+#else
+static inline int pte_write(pte_t pte)	{ return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte)	{ return pte_val(pte) & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte)	{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)	{ return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_WRITE;
+	if (pte_val(pte) & _PAGE_MODIFIED)
+		pte_val(pte) |= _PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_MODIFIED;
+	if (pte_val(pte) & _PAGE_WRITE)
+		pte_val(pte) |= _PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_ACCESSED;
+	if (pte_val(pte) & _PAGE_READ)
+		pte_val(pte) |= _PAGE_SILENT_READ;
+	return pte;
+}
+#endif
+static inline int pte_special(pte_t pte)	{ return 0; }
+static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+/*
+ * Macro to make mark a page protection value as "uncacheable".  Note
+ * that "protection" is really a misnomer here as the protection value
+ * contains the memory attribute bits, dirty bits, and various other
+ * bits as well.
+ */
+#define pgprot_noncached pgprot_noncached
+
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+	unsigned long prot = pgprot_val(_prot);
+
+	prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
+
+	return __pgprot(prot);
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte.pte_low  &= _PAGE_CHG_MASK;
+	pte.pte_high &= ~0x3f;
+	pte.pte_low  |= pgprot_val(newprot);
+	pte.pte_high |= pgprot_val(newprot) & 0x3f;
+	return pte;
+}
+#else
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+#endif
+
+
+extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
+	pte_t pte);
+extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
+	pte_t pte);
+
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+	unsigned long address, pte_t pte)
+{
+	__update_tlb(vma, address, pte);
+	__update_cache(vma, address, pte);
+}
+
+#define kern_addr_valid(addr)	(1)
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+		unsigned long vaddr,
+		unsigned long pfn,
+		unsigned long size,
+		pgprot_t prot)
+{
+	phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+	return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot);
+}
+#else
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+#endif
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * We provide our own get_unmapped area to cope with the virtual aliasing
+ * constraints placed on us by the cache architecture.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h
new file mode 100644
index 0000000..ebdbab9
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h
@@ -0,0 +1,46 @@
+/*
+ * include/asm-mips/pmc-sierra/msp71xx/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @author Patrick Glass <patrickglass@gmail.com>
+ */
+
+#ifndef __PMC_MSP71XX_GPIO_H
+#define __PMC_MSP71XX_GPIO_H
+
+/* Max number of gpio's is 28 on chip plus 3 banks of I2C IO Expanders */
+#define ARCH_NR_GPIOS (28 + (3 * 8))
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+/* Setup calls for the gpio and gpio extended */
+extern void msp71xx_init_gpio(void);
+extern void msp71xx_init_gpio_extended(void);
+extern int msp71xx_set_output_drive(unsigned gpio, int value);
+
+/* Custom output drive functionss */
+static inline int gpio_set_output_drive(unsigned gpio, int value)
+{
+	return msp71xx_set_output_drive(gpio, value);
+}
+
+/* IRQ's are not supported for gpio lines */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+#endif /* __PMC_MSP71XX_GPIO_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h
new file mode 100644
index 0000000..c84bcf9
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h
@@ -0,0 +1,151 @@
+/*
+ * Defines for the MSP interrupt controller.
+ *
+ * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_CIC_INT_H
+#define _MSP_CIC_INT_H
+
+/*
+ * The PMC-Sierra CIC interrupts are all centrally managed by the
+ * CIC sub-system.
+ * We attempt to keep the interrupt numbers as consistent as possible
+ * across all of the MSP devices, but some differences will creep in ...
+ * The interrupts which are directly forwarded to the MIPS core interrupts
+ * are assigned interrupts in the range 0-7, interrupts cascaded through
+ * the CIC are assigned interrupts 8-39.  The cascade occurs on C_IRQ4
+ * (MSP_INT_CIC).  Currently we don't really distinguish between VPE1
+ * and VPE0 (or thread contexts for that matter).  Will have to fix.
+ * The PER interrupts are assigned interrupts in the range 40-71.
+*/
+
+
+/*
+ * IRQs directly forwarded to the CPU
+ */
+#define MSP_MIPS_INTBASE	0
+#define MSP_INT_SW0		0	/* IRQ for swint0,       C_SW0  */
+#define MSP_INT_SW1		1	/* IRQ for swint1,       C_SW1  */
+#define MSP_INT_MAC0		2	/* IRQ for MAC 0,        C_IRQ0 */
+#define MSP_INT_MAC1		3	/* IRQ for MAC 1,        C_IRQ1 */
+#define MSP_INT_USB		4	/* IRQ for USB,          C_IRQ2 */
+#define MSP_INT_SAR		5	/* IRQ for ADSL2+ SAR,   C_IRQ3 */
+#define MSP_INT_CIC		6	/* IRQ for CIC block,    C_IRQ4 */
+#define MSP_INT_SEC		7	/* IRQ for Sec engine,   C_IRQ5 */
+
+/*
+ * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
+ * These defines should be tied to the register definitions for the CIC
+ * interrupt routine.  For now, just use hard-coded values.
+ */
+#define MSP_CIC_INTBASE		(MSP_MIPS_INTBASE + 8)
+#define MSP_INT_EXT0		(MSP_CIC_INTBASE + 0)
+					/* External interrupt 0         */
+#define MSP_INT_EXT1		(MSP_CIC_INTBASE + 1)
+					/* External interrupt 1         */
+#define MSP_INT_EXT2		(MSP_CIC_INTBASE + 2)
+					/* External interrupt 2         */
+#define MSP_INT_EXT3		(MSP_CIC_INTBASE + 3)
+					/* External interrupt 3         */
+#define MSP_INT_CPUIF		(MSP_CIC_INTBASE + 4)
+					/* CPU interface interrupt      */
+#define MSP_INT_EXT4		(MSP_CIC_INTBASE + 5)
+					/* External interrupt 4         */
+#define MSP_INT_CIC_USB		(MSP_CIC_INTBASE + 6)
+					/* Cascaded IRQ for USB         */
+#define MSP_INT_MBOX		(MSP_CIC_INTBASE + 7)
+					/* Sec engine mailbox IRQ       */
+#define MSP_INT_EXT5		(MSP_CIC_INTBASE + 8)
+					/* External interrupt 5         */
+#define MSP_INT_TDM		(MSP_CIC_INTBASE + 9)
+					/* TDM interrupt                */
+#define MSP_INT_CIC_MAC0	(MSP_CIC_INTBASE + 10)
+					/* Cascaded IRQ for MAC 0       */
+#define MSP_INT_CIC_MAC1	(MSP_CIC_INTBASE + 11)
+					/* Cascaded IRQ for MAC 1       */
+#define MSP_INT_CIC_SEC		(MSP_CIC_INTBASE + 12)
+					/* Cascaded IRQ for sec engine  */
+#define	MSP_INT_PER		(MSP_CIC_INTBASE + 13)
+					/* Peripheral interrupt         */
+#define	MSP_INT_TIMER0		(MSP_CIC_INTBASE + 14)
+					/* SLP timer 0                  */
+#define	MSP_INT_TIMER1		(MSP_CIC_INTBASE + 15)
+					/* SLP timer 1                  */
+#define	MSP_INT_TIMER2		(MSP_CIC_INTBASE + 16)
+					/* SLP timer 2                  */
+#define	MSP_INT_VPE0_TIMER	(MSP_CIC_INTBASE + 17)
+					/* VPE0 MIPS timer              */
+#define MSP_INT_BLKCP		(MSP_CIC_INTBASE + 18)
+					/* Block Copy                   */
+#define MSP_INT_UART0		(MSP_CIC_INTBASE + 19)
+					/* UART 0                       */
+#define MSP_INT_PCI		(MSP_CIC_INTBASE + 20)
+					/* PCI subsystem                */
+#define MSP_INT_EXT6		(MSP_CIC_INTBASE + 21)
+					/* External interrupt 5         */
+#define MSP_INT_PCI_MSI		(MSP_CIC_INTBASE + 22)
+					/* PCI Message Signal           */
+#define MSP_INT_CIC_SAR		(MSP_CIC_INTBASE + 23)
+					/* Cascaded ADSL2+ SAR IRQ      */
+#define MSP_INT_DSL		(MSP_CIC_INTBASE + 24)
+					/* ADSL2+ IRQ                   */
+#define MSP_INT_CIC_ERR		(MSP_CIC_INTBASE + 25)
+					/* SLP error condition          */
+#define MSP_INT_VPE1_TIMER	(MSP_CIC_INTBASE + 26)
+					/* VPE1 MIPS timer              */
+#define MSP_INT_VPE0_PC		(MSP_CIC_INTBASE + 27)
+					/* VPE0 Performance counter     */
+#define MSP_INT_VPE1_PC		(MSP_CIC_INTBASE + 28)
+					/* VPE1 Performance counter     */
+#define MSP_INT_EXT7		(MSP_CIC_INTBASE + 29)
+					/* External interrupt 5         */
+#define MSP_INT_VPE0_SW		(MSP_CIC_INTBASE + 30)
+					/* VPE0 Software interrupt      */
+#define MSP_INT_VPE1_SW		(MSP_CIC_INTBASE + 31)
+					/* VPE0 Software interrupt      */
+
+/*
+ * IRQs cascaded on CIC PER interrupt (MSP_INT_PER)
+ */
+#define MSP_PER_INTBASE		(MSP_CIC_INTBASE + 32)
+/* Reserved					   0-1                  */
+#define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
+					/* UART 1                       */
+/* Reserved					   3-5                  */
+#define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
+					/* 2-wire                       */
+#define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
+					/* Peripheral timer block out 0 */
+#define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
+					/* Peripheral timer block out 1 */
+/* Reserved					   9                    */
+#define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
+					/* SPI RX complete              */
+#define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
+					/* SPI TX complete              */
+#define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
+					/* GPIO                         */
+#define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
+					/* Peripheral error             */
+/* Reserved					   14-31                */
+
+#endif /* !_MSP_CIC_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h
new file mode 100644
index 0000000..1d9f054
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h
@@ -0,0 +1,43 @@
+/*
+ * Defines for the MSP interrupt handlers.
+ *
+ * Copyright (C) 2005, PMC-Sierra, Inc.  All rights reserved.
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_INT_H
+#define _MSP_INT_H
+
+/*
+ * The PMC-Sierra MSP product line has at least two different interrupt
+ * controllers, the SLP register based scheme and the CIC interrupt
+ * controller block mechanism.  This file distinguishes between them
+ * so that devices see a uniform interface.
+ */
+
+#if defined(CONFIG_IRQ_MSP_SLP)
+	#include "msp_slp_int.h"
+#elif defined(CONFIG_IRQ_MSP_CIC)
+	#include "msp_cic_int.h"
+#else
+	#error "What sort of interrupt controller does *your* MSP have?"
+#endif
+
+#endif /* !_MSP_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h
new file mode 100644
index 0000000..4156069
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) 2000-2006 PMC-Sierra INC.
+ *
+ *     This program is free software; you can redistribute it
+ *     and/or modify it under the terms of the GNU General
+ *     Public License as published by the Free Software
+ *     Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     This program is distributed in the hope that it will be
+ *     useful, but WITHOUT ANY WARRANTY; without even the implied
+ *     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ *     PURPOSE.  See the GNU General Public License for more
+ *     details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this program; if not, write to the Free
+ *     Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+ *     02139, USA.
+ *
+ * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
+ * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
+ * SOFTWARE.
+ */
+
+#ifndef _MSP_PCI_H_
+#define _MSP_PCI_H_
+
+#define MSP_HAS_PCI(ID)	(((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
+
+/*
+ * It is convenient to program the OATRAN register so that
+ * Athena virtual address space and PCI address space are
+ * the same. This is not a requirement, just a convenience.
+ *
+ * The only hard restrictions on the value of OATRAN is that
+ * OATRAN must not be programmed to allow translated memory
+ * addresses to fall within the lowest 512MB of
+ * PCI address space. This region is hardcoded
+ * for use as Athena PCI Host Controller target
+ * access memory space to the Athena's SDRAM.
+ *
+ * Note that OATRAN applies only to memory accesses, not
+ * to I/O accesses.
+ *
+ * To program OATRAN to make Athena virtual address space
+ * and PCI address space have the same values, OATRAN
+ * is to be programmed to 0xB8000000. The top seven
+ * bits of the value mimic the seven bits clipped off
+ * by the PCI Host controller.
+ *
+ * With OATRAN at the said value, when the CPU does
+ * an access to its virtual address at, say 0xB900_5000,
+ * the address appearing on the PCI bus will be
+ * 0xB900_5000.
+ *    - Michael Penner
+ */
+#define MSP_PCI_OATRAN		0xB8000000UL
+
+#define MSP_PCI_SPACE_BASE	(MSP_PCI_OATRAN + 0x1002000UL)
+#define MSP_PCI_SPACE_SIZE	(0x3000000UL - 0x2000)
+#define MSP_PCI_SPACE_END \
+		(MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
+#define MSP_PCI_IOSPACE_BASE	(MSP_PCI_OATRAN + 0x1001000UL)
+#define MSP_PCI_IOSPACE_SIZE	0x1000
+#define MSP_PCI_IOSPACE_END  \
+		(MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
+
+/* IRQ for PCI status interrupts */
+#define PCI_STAT_IRQ	20
+
+#define QFLUSH_REG_1	0xB7F40000
+
+typedef volatile unsigned int pcireg;
+typedef void * volatile ppcireg;
+
+struct pci_block_copy
+{
+    pcireg   unused1; /* +0x00 */
+    pcireg   unused2; /* +0x04 */
+    ppcireg  unused3; /* +0x08 */
+    ppcireg  unused4; /* +0x0C */
+    pcireg   unused5; /* +0x10 */
+    pcireg   unused6; /* +0x14 */
+    pcireg   unused7; /* +0x18 */
+    ppcireg  unused8; /* +0x1C */
+    ppcireg  unused9; /* +0x20 */
+    pcireg   unusedA; /* +0x24 */
+    ppcireg  unusedB; /* +0x28 */
+    ppcireg  unusedC; /* +0x2C */
+};
+
+enum
+{
+    config_device_vendor,  /* 0 */
+    config_status_command, /* 1 */
+    config_class_revision, /* 2 */
+    config_BIST_header_latency_cache, /* 3 */
+    config_BAR0,           /* 4 */
+    config_BAR1,           /* 5 */
+    config_BAR2,           /* 6 */
+    config_not_used7,      /* 7 */
+    config_not_used8,      /* 8 */
+    config_not_used9,      /* 9 */
+    config_CIS,            /* 10 */
+    config_subsystem,      /* 11 */
+    config_not_used12,     /* 12 */
+    config_capabilities,   /* 13 */
+    config_not_used14,     /* 14 */
+    config_lat_grant_irq,  /* 15 */
+    config_message_control,/* 16 */
+    config_message_addr,   /* 17 */
+    config_message_data,   /* 18 */
+    config_VPD_addr,       /* 19 */
+    config_VPD_data,       /* 20 */
+    config_maxregs         /* 21 - number of registers */
+};
+
+struct msp_pci_regs
+{
+    pcireg hop_unused_00; /* +0x00 */
+    pcireg hop_unused_04; /* +0x04 */
+    pcireg hop_unused_08; /* +0x08 */
+    pcireg hop_unused_0C; /* +0x0C */
+    pcireg hop_unused_10; /* +0x10 */
+    pcireg hop_unused_14; /* +0x14 */
+    pcireg hop_unused_18; /* +0x18 */
+    pcireg hop_unused_1C; /* +0x1C */
+    pcireg hop_unused_20; /* +0x20 */
+    pcireg hop_unused_24; /* +0x24 */
+    pcireg hop_unused_28; /* +0x28 */
+    pcireg hop_unused_2C; /* +0x2C */
+    pcireg hop_unused_30; /* +0x30 */
+    pcireg hop_unused_34; /* +0x34 */
+    pcireg if_control;    /* +0x38 */
+    pcireg oatran;        /* +0x3C */
+    pcireg reset_ctl;     /* +0x40 */
+    pcireg config_addr;   /* +0x44 */
+    pcireg hop_unused_48; /* +0x48 */
+    pcireg msg_signaled_int_status; /* +0x4C */
+    pcireg msg_signaled_int_mask;   /* +0x50 */
+    pcireg if_status;     /* +0x54 */
+    pcireg if_mask;       /* +0x58 */
+    pcireg hop_unused_5C; /* +0x5C */
+    pcireg hop_unused_60; /* +0x60 */
+    pcireg hop_unused_64; /* +0x64 */
+    pcireg hop_unused_68; /* +0x68 */
+    pcireg hop_unused_6C; /* +0x6C */
+    pcireg hop_unused_70; /* +0x70 */
+
+    struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
+
+    pcireg error_hdr1; /* +0xE0 */
+    pcireg error_hdr2; /* +0xE4 */
+
+    pcireg config[config_maxregs] __attribute__((aligned(256)));
+
+};
+
+#define BPCI_CFGADDR_BUSNUM_SHF 16
+#define BPCI_CFGADDR_FUNCTNUM_SHF 8
+#define BPCI_CFGADDR_REGNUM_SHF 2
+#define BPCI_CFGADDR_ENABLE (1<<31)
+
+#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
+#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
+#define BPCI_IFCONTROL_CTO_SHF 12  /* Shift count for CTO bits */
+#define BPCI_IFCONTROL_SE  (1<<5)  /* Enable exceptions on errors */
+#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
+#define BPCI_IFCONTROL_CAP (1<<3)  /* Enable capabilities */
+#define BPCI_IFCONTROL_MMC_SHF 0   /* Shift count for MMC bits */
+
+#define BPCI_IFSTATUS_MGT  (1<<8)  /* Master Grant timeout */
+#define BPCI_IFSTATUS_MTT  (1<<9)  /* Master TRDY timeout */
+#define BPCI_IFSTATUS_MRT  (1<<10) /* Master retry timeout */
+#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
+#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
+#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
+#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
+#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
+#define BPCI_IFSTATUS_RTO  (1<<18) /* Retry time out */
+#define BPCI_IFSTATUS_SER  (1<<19) /* System error */
+#define BPCI_IFSTATUS_PER  (1<<20) /* Parity error */
+#define BPCI_IFSTATUS_LCA  (1<<21) /* Local CPU abort */
+#define BPCI_IFSTATUS_MEM  (1<<22) /* Memory prot. violation */
+#define BPCI_IFSTATUS_ARB  (1<<23) /* Arbiter timed out */
+#define BPCI_IFSTATUS_STA  (1<<27) /* Signaled target abort */
+#define BPCI_IFSTATUS_TA   (1<<28) /* Target abort */
+#define BPCI_IFSTATUS_MA   (1<<29) /* Master abort */
+#define BPCI_IFSTATUS_PEI  (1<<30) /* Parity error as initiator */
+#define BPCI_IFSTATUS_PET  (1<<31) /* Parity error as target */
+
+#define BPCI_RESETCTL_PR (1<<0)    /* True if reset asserted */
+#define BPCI_RESETCTL_RT (1<<4)    /* Release time */
+#define BPCI_RESETCTL_CT (1<<8)    /* Config time */
+#define BPCI_RESETCTL_PE (1<<12)   /* PCI enabled */
+#define BPCI_RESETCTL_HM (1<<13)   /* PCI host mode */
+#define BPCI_RESETCTL_RI (1<<14)   /* PCI reset in */
+
+extern struct msp_pci_regs msp_pci_regs
+			__attribute__((section(".register")));
+extern unsigned long msp_pci_config_space
+			__attribute__((section(".register")));
+
+#endif /* !_MSP_PCI_H_ */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
new file mode 100644
index 0000000..14ca7dc
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
@@ -0,0 +1,176 @@
+/*
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _ASM_MSP_PROM_H
+#define _ASM_MSP_PROM_H
+
+#include <linux/types.h>
+
+#define DEVICEID			"deviceid"
+#define FEATURES			"features"
+#define PROM_ENV			"prom_env"
+#define PROM_ENV_FILE			"/proc/"PROM_ENV
+#define PROM_ENV_SIZE			256
+
+#define CPU_DEVID_FAMILY		0x0000ff00
+#define CPU_DEVID_REVISION		0x000000ff
+
+#define FPGA_IS_POLO(revision) \
+		(((revision >= 0xb0) && (revision < 0xd0)))
+#define FPGA_IS_5000(revision) \
+		((revision >= 0x80) && (revision <= 0x90))
+#define	FPGA_IS_ZEUS(revision)		((revision < 0x7f))
+#define FPGA_IS_DUET(revision) \
+		(((revision >= 0xa0) && (revision < 0xb0)))
+#define FPGA_IS_MSP4200(revision)	((revision >= 0xd0))
+#define FPGA_IS_MSP7100(revision)	((revision >= 0xd0))
+
+#define MACHINE_TYPE_POLO		"POLO"
+#define MACHINE_TYPE_DUET		"DUET"
+#define	MACHINE_TYPE_ZEUS		"ZEUS"
+#define MACHINE_TYPE_MSP2000REVB	"MSP2000REVB"
+#define MACHINE_TYPE_MSP5000		"MSP5000"
+#define MACHINE_TYPE_MSP4200		"MSP4200"
+#define MACHINE_TYPE_MSP7120		"MSP7120"
+#define MACHINE_TYPE_MSP7130		"MSP7130"
+#define MACHINE_TYPE_OTHER		"OTHER"
+
+#define MACHINE_TYPE_POLO_FPGA		"POLO-FPGA"
+#define MACHINE_TYPE_DUET_FPGA		"DUET-FPGA"
+#define	MACHINE_TYPE_ZEUS_FPGA		"ZEUS_FPGA"
+#define MACHINE_TYPE_MSP2000REVB_FPGA	"MSP2000REVB-FPGA"
+#define MACHINE_TYPE_MSP5000_FPGA	"MSP5000-FPGA"
+#define MACHINE_TYPE_MSP4200_FPGA	"MSP4200-FPGA"
+#define MACHINE_TYPE_MSP7100_FPGA	"MSP7100-FPGA"
+#define MACHINE_TYPE_OTHER_FPGA		"OTHER-FPGA"
+
+/* Device Family definitions */
+#define FAMILY_FPGA			0x0000
+#define FAMILY_ZEUS			0x1000
+#define FAMILY_POLO			0x2000
+#define FAMILY_DUET			0x4000
+#define FAMILY_TRIAD			0x5000
+#define FAMILY_MSP4200			0x4200
+#define FAMILY_MSP4200_FPGA		0x4f00
+#define FAMILY_MSP7100			0x7100
+#define FAMILY_MSP7100_FPGA		0x7f00
+
+/* Device Type definitions */
+#define TYPE_MSP7120			0x7120
+#define TYPE_MSP7130			0x7130
+
+#define ENET_KEY		'E'
+#define ENETTXD_KEY		'e'
+#define PCI_KEY			'P'
+#define PCIMUX_KEY		'p'
+#define SEC_KEY			'S'
+#define SPAD_KEY		'D'
+#define TDM_KEY			'T'
+#define ZSP_KEY			'Z'
+
+#define FEATURE_NOEXIST		'-'
+#define FEATURE_EXIST		'+'
+
+#define ENET_MII		'M'
+#define ENET_RMII		'R'
+
+#define	ENETTXD_FALLING		'F'
+#define ENETTXD_RISING		'R'
+
+#define PCI_HOST		'H'
+#define PCI_PERIPHERAL		'P'
+
+#define PCIMUX_FULL		'F'
+#define PCIMUX_SINGLE		'S'
+
+#define SEC_DUET		'D'
+#define SEC_POLO		'P'
+#define SEC_SLOW		'S'
+#define SEC_TRIAD		'T'
+
+#define SPAD_POLO		'P'
+
+#define TDM_DUET		'D'	/* DUET TDMs might exist */
+#define TDM_POLO		'P'	/* POLO TDMs might exist */
+#define TDM_TRIAD		'T'	/* TRIAD TDMs might exist */
+
+#define ZSP_DUET		'D'	/* one DUET zsp engine */
+#define ZSP_TRIAD		'T'	/* two TRIAD zsp engines */
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem,
+			       unsigned long end_mem);
+
+#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
+extern bool get_ramroot(void **start, unsigned long *size);
+#endif
+
+extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr);
+extern unsigned long get_deviceid(void);
+extern char identify_enet(unsigned long interface_num);
+extern char identify_enetTxD(unsigned long interface_num);
+extern char identify_pci(void);
+extern char identify_sec(void);
+extern char identify_spad(void);
+extern char identify_sec(void);
+extern char identify_tdm(void);
+extern char identify_zsp(void);
+extern unsigned long identify_family(void);
+extern unsigned long identify_revision(void);
+
+/*
+ * The following macro calls prom_printf and puts the format string
+ * into an init section so it can be reclaimed.
+ */
+#define ppfinit(f, x...) \
+	do { \
+		static char _f[] __initdata = KERN_INFO f; \
+		printk(_f, ## x); \
+	} while (0)
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS    7	/* 6 used */
+
+enum yamon_memtypes {
+	yamon_dontuse,
+	yamon_prom,
+	yamon_free,
+};
+
+struct prom_pmemblock {
+	unsigned long base; /* Within KSEG0. */
+	unsigned int size;  /* In bytes. */
+	unsigned int type;  /* free or prom memory */
+};
+
+extern int prom_argc;
+extern char **prom_argv;
+extern char **prom_envp;
+extern int *prom_vec;
+extern struct prom_pmemblock *prom_getmdesc(void);
+
+#endif /* !_ASM_MSP_PROM_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
new file mode 100644
index 0000000..60a5a38
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
@@ -0,0 +1,236 @@
+/*
+ * SMP/VPE-safe functions to access "registers" (see note).
+ *
+ * NOTES:
+* - These macros use ll/sc instructions, so it is your responsibility to
+ * ensure these are available on your platform before including this file.
+ * - The MIPS32 spec states that ll/sc results are undefined for uncached
+ * accesses. This means they can't be used on HW registers accessed
+ * through kseg1. Code which requires these macros for this purpose must
+ * front-end the registers with cached memory "registers" and have a single
+ * thread update the actual HW registers.
+ * - A maximum of 2k of code can be inserted between ll and sc. Every
+ * memory accesses between the instructions will increase the chance of
+ * sc failing and having to loop.
+ * - When using custom_read_reg32/custom_write_reg32 only perform the
+ * necessary logical operations on the register value in between these
+ * two calls. All other logic should be performed before the first call.
+  * - There is a bug on the R10000 chips which has a workaround. If you
+ * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR'
+ * to be non-zero.  If you are using this header from within linux, you may
+ * include <asm/war.h> before including this file to have this defined
+ * appropriately for you.
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+ *  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF USE,
+ *  DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc., 675
+ *  Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_REGOPS_H__
+#define __ASM_REGOPS_H__
+
+#include <linux/types.h>
+
+#include <asm/war.h>
+
+#ifndef R10000_LLSC_WAR
+#define R10000_LLSC_WAR 0
+#endif
+
+#if R10000_LLSC_WAR == 1
+#define __beqz	"beqzl	"
+#else
+#define __beqz	"beqz	"
+#endif
+
+#ifndef _LINUX_TYPES_H
+typedef unsigned int u32;
+#endif
+
+/*
+ * Sets all the masked bits to the corresponding value bits
+ */
+static inline void set_value_reg32(volatile u32 *const addr,
+					u32 const mask,
+					u32 const value)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1	# set_value_reg32	\n"
+	"	and	%0, %2				\n"
+	"	or	%0, %3				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (~mask), "ir" (value), "m" (*addr));
+}
+
+/*
+ * Sets all the masked bits to '1'
+ */
+static inline void set_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# set_reg32	\n"
+	"	or	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (mask), "m" (*addr));
+}
+
+/*
+ * Sets all the masked bits to '0'
+ */
+static inline void clear_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# clear_reg32	\n"
+	"	and	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (~mask), "m" (*addr));
+}
+
+/*
+ * Toggles all masked bits from '0' to '1' and '1' to '0'
+ */
+static inline void toggle_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# toggle_reg32	\n"
+	"	xor	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (mask), "m" (*addr));
+}
+
+/*
+ * Read all masked bits others are returned as '0'
+ */
+static inline u32 read_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	noreorder			\n"
+	"	lw	%0, %1		# read		\n"
+	"	and	%0, %2		# mask		\n"
+	"	.set	pop				\n"
+	: "=&r" (temp)
+	: "m" (*addr), "ir" (mask));
+
+	return temp;
+}
+
+/*
+ * blocking_read_reg32 - Read address with blocking load
+ *
+ * Uncached writes need to be read back to ensure they reach RAM.
+ * The returned value must be 'used' to prevent from becoming a
+ * non-blocking load.
+ */
+static inline u32 blocking_read_reg32(volatile u32 *const addr)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	noreorder			\n"
+	"	lw	%0, %1		# read		\n"
+	"	move	%0, %0		# block		\n"
+	"	.set	pop				\n"
+	: "=&r" (temp)
+	: "m" (*addr));
+
+	return temp;
+}
+
+/*
+ * For special strange cases only:
+ *
+ * If you need custom processing within a ll/sc loop, use the following macros
+ * VERY CAREFULLY:
+ *
+ *   u32 tmp;				<-- Define a variable to hold the data
+ *
+ *   custom_read_reg32(address, tmp);	<-- Reads the address and put the value
+ *						in the 'tmp' variable given
+ *
+ *	From here on out, you are (basicly) atomic, so don't do anything too
+ *	fancy!
+ *	Also, this code may loop if the end of this block fails to write
+ *	everything back safely due do the other CPU, so do NOT do anything
+ *	with side-effects!
+ *
+ *   custom_write_reg32(address, tmp);	<-- Writes back 'tmp' safely.
+ */
+#define custom_read_reg32(address, tmp)				\
+	__asm__ __volatile__(					\
+	"	.set	push				\n"	\
+	"	.set	mips3				\n"	\
+	"1:	ll	%0, %1	#custom_read_reg32	\n"	\
+	"	.set	pop				\n"	\
+	: "=r" (tmp), "=m" (*address)				\
+	: "m" (*address))
+
+#define custom_write_reg32(address, tmp)			\
+	__asm__ __volatile__(					\
+	"	.set	push				\n"	\
+	"	.set	mips3				\n"	\
+	"	sc	%0, %1	#custom_write_reg32	\n"	\
+	"	"__beqz"%0, 1b				\n"	\
+	"	nop					\n"	\
+	"	.set	pop				\n"	\
+	: "=&r" (tmp), "=m" (*address)				\
+	: "0" (tmp), "m" (*address))
+
+#endif  /* __ASM_REGOPS_H__ */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h
new file mode 100644
index 0000000..603eb73
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h
@@ -0,0 +1,663 @@
+/*
+ * Defines for the address space, registers and register configuration
+ * (bit masks, access macros etc) for the PMC-Sierra line of MSP products.
+ * This file contains addess maps for all the devices in the line of
+ * products but only has register definitions and configuration masks for
+ * registers which aren't definitely associated with any device.  Things
+ * like clock settings, reset access, the ELB etc.  Individual device
+ * drivers will reference the appropriate XXX_BASE value defined here
+ * and have individual registers offset from that.
+ *
+ * Copyright (C) 2005-2007 PMC-Sierra, Inc.  All rights reserved.
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#include <asm/addrspace.h>
+#include <linux/types.h>
+
+#ifndef _ASM_MSP_REGS_H
+#define _ASM_MSP_REGS_H
+
+/*
+ ########################################################################
+ #  Address space and device base definitions                           #
+ ########################################################################
+ */
+
+/*
+ ***************************************************************************
+ * System Logic and Peripherals (ELB, UART0, etc) device address space     *
+ ***************************************************************************
+ */
+#define MSP_SLP_BASE		0x1c000000
+					/* System Logic and Peripherals */
+#define MSP_RST_BASE		(MSP_SLP_BASE + 0x10)
+					/* System reset register base	*/
+#define MSP_RST_SIZE		0x0C	/* System reset register space	*/
+
+#define MSP_WTIMER_BASE		(MSP_SLP_BASE + 0x04C)
+					/* watchdog timer base          */
+#define MSP_ITIMER_BASE		(MSP_SLP_BASE + 0x054)
+					/* internal timer base          */
+#define MSP_UART0_BASE		(MSP_SLP_BASE + 0x100)
+					/* UART0 controller base        */
+#define MSP_BCPY_CTRL_BASE	(MSP_SLP_BASE + 0x120)
+					/* Block Copy controller base   */
+#define MSP_BCPY_DESC_BASE	(MSP_SLP_BASE + 0x160)
+					/* Block Copy descriptor base   */
+
+/*
+ ***************************************************************************
+ * PCI address space                                                       *
+ ***************************************************************************
+ */
+#define MSP_PCI_BASE		0x19000000
+
+/*
+ ***************************************************************************
+ * MSbus device address space                                              *
+ ***************************************************************************
+ */
+#define MSP_MSB_BASE		0x18000000
+					/* MSbus address start          */
+#define MSP_PER_BASE		(MSP_MSB_BASE + 0x400000)
+					/* Peripheral device registers  */
+#define MSP_MAC0_BASE		(MSP_MSB_BASE + 0x600000)
+					/* MAC A device registers       */
+#define MSP_MAC1_BASE		(MSP_MSB_BASE + 0x700000)
+					/* MAC B device registers       */
+#define MSP_MAC_SIZE		0xE0	/* MAC register space		*/
+
+#define MSP_SEC_BASE		(MSP_MSB_BASE + 0x800000)
+					/* Security Engine registers    */
+#define MSP_MAC2_BASE		(MSP_MSB_BASE + 0x900000)
+					/* MAC C device registers       */
+#define MSP_ADSL2_BASE		(MSP_MSB_BASE + 0xA80000)
+					/* ADSL2 device registers       */
+#define MSP_USB_BASE		(MSP_MSB_BASE + 0xB40000)
+					/* USB device registers         */
+#define MSP_USB_BASE_START	(MSP_MSB_BASE + 0xB40100)
+					/* USB device registers         */
+#define MSP_USB_BASE_END	(MSP_MSB_BASE + 0xB401FF)
+					/* USB device registers         */
+#define MSP_CPUIF_BASE		(MSP_MSB_BASE + 0xC00000)
+					/* CPU interface registers      */
+
+/* Devices within the MSbus peripheral block */
+#define MSP_UART1_BASE		(MSP_PER_BASE + 0x030)
+					/* UART1 controller base        */
+#define MSP_SPI_BASE		(MSP_PER_BASE + 0x058)
+					/* SPI/MPI control registers    */
+#define MSP_TWI_BASE		(MSP_PER_BASE + 0x090)
+					/* Two-wire control registers   */
+#define MSP_PTIMER_BASE		(MSP_PER_BASE + 0x0F0)
+					/* Programmable timer control   */
+
+/*
+ ***************************************************************************
+ * Physical Memory configuration address space                             *
+ ***************************************************************************
+ */
+#define MSP_MEM_CFG_BASE	0x17f00000
+
+#define MSP_MEM_INDIRECT_CTL_10	0x10
+
+/*
+ * Notes:
+ *  1) The SPI registers are split into two blocks, one offset from the
+ *     MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by
+ *     0x68.  The SPI driver definitions for the register must be aware
+ *     of this.
+ *  2) The block copy engine register are divided into two regions, one
+ *     for the control/configuration of the engine proper and one for the
+ *     values of the descriptors used in the copy process.  These have
+ *     different base defines (CTRL_BASE vs DESC_BASE)
+ *  3) These constants are for physical addresses which means that they
+ *     work correctly with "ioremap" and friends.  This means that device
+ *     drivers will need to remap these addresses using ioremap and perhaps
+ *     the readw/writew macros.  Or they could use the regptr() macro
+ *     defined below, but the readw/writew calls are the correct thing.
+ *  4) The UARTs have an additional status register offset from the base
+ *     address.  This register isn't used in the standard 8250 driver but
+ *     may be used in other software.  Consult the hardware datasheet for
+ *     offset details.
+ *  5) For some unknown reason the security engine (MSP_SEC_BASE) registers
+ *     start at an offset of 0x84 from the base address but the block of
+ *     registers before this is reserved for the security engine.  The
+ *     driver will have to be aware of this but it makes the register
+ *     definitions line up better with the documentation.
+ */
+
+/*
+ ########################################################################
+ #  System register definitions.  Not associated with a specific device #
+ ########################################################################
+ */
+
+/*
+ * This macro maps the physical register number into uncached space
+ * and (for C code) casts it into a u32 pointer so it can be dereferenced
+ * Normally these would be accessed with ioremap and readX/writeX, but
+ * these are convenient for a lot of internal kernel code.
+ */
+#ifdef __ASSEMBLER__
+	#define regptr(addr) (KSEG1ADDR(addr))
+#else
+	#define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr)))
+#endif
+
+/*
+ ***************************************************************************
+ * System Logic and Peripherals (RESET, ELB, etc) registers                *
+ ***************************************************************************
+ */
+
+/* System Control register definitions */
+#define	DEV_ID_REG	regptr(MSP_SLP_BASE + 0x00)
+					/* Device-ID                 RO */
+#define	FWR_ID_REG	regptr(MSP_SLP_BASE + 0x04)
+					/* Firmware-ID Register      RW */
+#define	SYS_ID_REG0	regptr(MSP_SLP_BASE + 0x08)
+					/* System-ID Register-0      RW */
+#define	SYS_ID_REG1	regptr(MSP_SLP_BASE + 0x0C)
+					/* System-ID Register-1      RW */
+
+/* System Reset register definitions */
+#define	RST_STS_REG	regptr(MSP_SLP_BASE + 0x10)
+					/* System Reset Status       RO */
+#define	RST_SET_REG	regptr(MSP_SLP_BASE + 0x14)
+					/* System Set Reset          WO */
+#define	RST_CLR_REG	regptr(MSP_SLP_BASE + 0x18)
+					/* System Clear Reset        WO */
+
+/* System Clock Registers */
+#define PCI_SLP_REG	regptr(MSP_SLP_BASE + 0x1C)
+					/* PCI clock generator       RW */
+#define URT_SLP_REG	regptr(MSP_SLP_BASE + 0x20)
+					/* UART clock generator      RW */
+/* reserved		      (MSP_SLP_BASE + 0x24)                     */
+/* reserved		      (MSP_SLP_BASE + 0x28)                     */
+#define PLL1_SLP_REG	regptr(MSP_SLP_BASE + 0x2C)
+					/* PLL1 clock generator      RW */
+#define PLL0_SLP_REG	regptr(MSP_SLP_BASE + 0x30)
+					/* PLL0 clock generator      RW */
+#define MIPS_SLP_REG	regptr(MSP_SLP_BASE + 0x34)
+					/* MIPS clock generator      RW */
+#define	VE_SLP_REG	regptr(MSP_SLP_BASE + 0x38)
+					/* Voice Eng clock generator RW */
+/* reserved		      (MSP_SLP_BASE + 0x3C)                     */
+#define MSB_SLP_REG	regptr(MSP_SLP_BASE + 0x40)
+					/* MS-Bus clock generator    RW */
+#define SMAC_SLP_REG	regptr(MSP_SLP_BASE + 0x44)
+					/* Sec & MAC clock generator RW */
+#define PERF_SLP_REG	regptr(MSP_SLP_BASE + 0x48)
+					/* Per & TDM clock generator RW */
+
+/* Interrupt Controller Registers */
+#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70)
+					/* Interrupt status register RW */
+#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74)
+					/* Interrupt enable/mask     RW */
+#define SE_MBOX_REG	regptr(MSP_SLP_BASE + 0x78)
+					/* Security Engine mailbox   RW */
+#define VE_MBOX_REG	regptr(MSP_SLP_BASE + 0x7C)
+					/* Voice Engine mailbox      RW */
+
+/* ELB Controller Registers */
+#define CS0_CNFG_REG	regptr(MSP_SLP_BASE + 0x80)
+					/* ELB CS0 Configuration Reg    */
+#define CS0_ADDR_REG	regptr(MSP_SLP_BASE + 0x84)
+					/* ELB CS0 Base Address Reg     */
+#define CS0_MASK_REG	regptr(MSP_SLP_BASE + 0x88)
+					/* ELB CS0 Mask Register        */
+#define CS0_ACCESS_REG	regptr(MSP_SLP_BASE + 0x8C)
+					/* ELB CS0 access register      */
+
+#define CS1_CNFG_REG	regptr(MSP_SLP_BASE + 0x90)
+					/* ELB CS1 Configuration Reg    */
+#define CS1_ADDR_REG	regptr(MSP_SLP_BASE + 0x94)
+					/* ELB CS1 Base Address Reg     */
+#define CS1_MASK_REG	regptr(MSP_SLP_BASE + 0x98)
+					/* ELB CS1 Mask Register        */
+#define CS1_ACCESS_REG	regptr(MSP_SLP_BASE + 0x9C)
+					/* ELB CS1 access register      */
+
+#define CS2_CNFG_REG	regptr(MSP_SLP_BASE + 0xA0)
+					/* ELB CS2 Configuration Reg    */
+#define CS2_ADDR_REG	regptr(MSP_SLP_BASE + 0xA4)
+					/* ELB CS2 Base Address Reg     */
+#define CS2_MASK_REG	regptr(MSP_SLP_BASE + 0xA8)
+					/* ELB CS2 Mask Register        */
+#define CS2_ACCESS_REG	regptr(MSP_SLP_BASE + 0xAC)
+					/* ELB CS2 access register      */
+
+#define CS3_CNFG_REG	regptr(MSP_SLP_BASE + 0xB0)
+					/* ELB CS3 Configuration Reg    */
+#define CS3_ADDR_REG	regptr(MSP_SLP_BASE + 0xB4)
+					/* ELB CS3 Base Address Reg     */
+#define CS3_MASK_REG	regptr(MSP_SLP_BASE + 0xB8)
+					/* ELB CS3 Mask Register        */
+#define CS3_ACCESS_REG	regptr(MSP_SLP_BASE + 0xBC)
+					/* ELB CS3 access register      */
+
+#define CS4_CNFG_REG	regptr(MSP_SLP_BASE + 0xC0)
+					/* ELB CS4 Configuration Reg    */
+#define CS4_ADDR_REG	regptr(MSP_SLP_BASE + 0xC4)
+					/* ELB CS4 Base Address Reg     */
+#define CS4_MASK_REG	regptr(MSP_SLP_BASE + 0xC8)
+					/* ELB CS4 Mask Register        */
+#define CS4_ACCESS_REG	regptr(MSP_SLP_BASE + 0xCC)
+					/* ELB CS4 access register      */
+
+#define CS5_CNFG_REG	regptr(MSP_SLP_BASE + 0xD0)
+					/* ELB CS5 Configuration Reg    */
+#define CS5_ADDR_REG	regptr(MSP_SLP_BASE + 0xD4)
+					/* ELB CS5 Base Address Reg     */
+#define CS5_MASK_REG	regptr(MSP_SLP_BASE + 0xD8)
+					/* ELB CS5 Mask Register        */
+#define CS5_ACCESS_REG	regptr(MSP_SLP_BASE + 0xDC)
+					/* ELB CS5 access register      */
+
+/* reserved			       0xE0 - 0xE8                      */
+#define ELB_1PC_EN_REG	regptr(MSP_SLP_BASE + 0xEC)
+					/* ELB single PC card detect    */
+
+/* reserved			       0xF0 - 0xF8                      */
+#define ELB_CLK_CFG_REG	regptr(MSP_SLP_BASE + 0xFC)
+					/* SDRAM read/ELB timing Reg    */
+
+/* Extended UART status registers */
+#define UART0_STATUS_REG	regptr(MSP_UART0_BASE + 0x0c0)
+					/* UART Status Register 0       */
+#define UART1_STATUS_REG	regptr(MSP_UART1_BASE + 0x170)
+					/* UART Status Register 1       */
+
+/* Performance monitoring registers */
+#define PERF_MON_CTRL_REG	regptr(MSP_SLP_BASE + 0x140)
+					/* Performance monitor control  */
+#define PERF_MON_CLR_REG	regptr(MSP_SLP_BASE + 0x144)
+					/* Performance monitor clear    */
+#define PERF_MON_CNTH_REG	regptr(MSP_SLP_BASE + 0x148)
+					/* Perf monitor counter high    */
+#define PERF_MON_CNTL_REG	regptr(MSP_SLP_BASE + 0x14C)
+					/* Perf monitor counter low     */
+
+/* System control registers */
+#define SYS_CTRL_REG		regptr(MSP_SLP_BASE + 0x150)
+					/* System control register      */
+#define SYS_ERR1_REG		regptr(MSP_SLP_BASE + 0x154)
+					/* System Error status 1        */
+#define SYS_ERR2_REG		regptr(MSP_SLP_BASE + 0x158)
+					/* System Error status 2        */
+#define SYS_INT_CFG_REG		regptr(MSP_SLP_BASE + 0x15C)
+					/* System Interrupt config      */
+
+/* Voice Engine Memory configuration */
+#define VE_MEM_REG		regptr(MSP_SLP_BASE + 0x17C)
+					/* Voice engine memory config   */
+
+/* CPU/SLP Error Status registers */
+#define CPU_ERR1_REG		regptr(MSP_SLP_BASE + 0x180)
+					/* CPU/SLP Error status 1       */
+#define CPU_ERR2_REG		regptr(MSP_SLP_BASE + 0x184)
+					/* CPU/SLP Error status 1       */
+
+#define EXTENDED_GPIO_REG	regptr(MSP_SLP_BASE + 0x188)
+					/* Extended GPIO register       */
+
+/* System Error registers */
+#define SLP_ERR_STS_REG		regptr(MSP_SLP_BASE + 0x190)
+					/* Int status for SLP errors    */
+#define SLP_ERR_MSK_REG		regptr(MSP_SLP_BASE + 0x194)
+					/* Int mask for SLP errors      */
+#define SLP_ELB_ERST_REG	regptr(MSP_SLP_BASE + 0x198)
+					/* External ELB reset           */
+#define SLP_BOOT_STS_REG	regptr(MSP_SLP_BASE + 0x19C)
+					/* Boot Status                  */
+
+/* Extended ELB addressing */
+#define CS0_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A0)
+					/* CS0 Extended address         */
+#define CS1_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A4)
+					/* CS1 Extended address         */
+#define CS2_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A8)
+					/* CS2 Extended address         */
+#define CS3_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1AC)
+					/* CS3 Extended address         */
+/* reserved					      0x1B0             */
+#define CS5_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1B4)
+					/* CS5 Extended address         */
+
+/* PLL Adjustment registers */
+#define PLL_LOCK_REG		regptr(MSP_SLP_BASE + 0x200)
+					/* PLL0 lock status             */
+#define PLL_ARST_REG		regptr(MSP_SLP_BASE + 0x204)
+					/* PLL Analog reset status      */
+#define PLL0_ADJ_REG		regptr(MSP_SLP_BASE + 0x208)
+					/* PLL0 Adjustment value        */
+#define PLL1_ADJ_REG		regptr(MSP_SLP_BASE + 0x20C)
+					/* PLL1 Adjustment value        */
+
+/*
+ ***************************************************************************
+ * Peripheral Register definitions                                         *
+ ***************************************************************************
+ */
+
+/* Peripheral status */
+#define PER_CTRL_REG		regptr(MSP_PER_BASE + 0x50)
+					/* Peripheral control register  */
+#define PER_STS_REG		regptr(MSP_PER_BASE + 0x54)
+					/* Peripheral status register   */
+
+/* SPI/MPI Registers */
+#define SMPI_TX_SZ_REG		regptr(MSP_PER_BASE + 0x58)
+					/* SPI/MPI Tx Size register     */
+#define SMPI_RX_SZ_REG		regptr(MSP_PER_BASE + 0x5C)
+					/* SPI/MPI Rx Size register     */
+#define SMPI_CTL_REG		regptr(MSP_PER_BASE + 0x60)
+					/* SPI/MPI Control register     */
+#define SMPI_MS_REG		regptr(MSP_PER_BASE + 0x64)
+					/* SPI/MPI Chip Select reg      */
+#define SMPI_CORE_DATA_REG	regptr(MSP_PER_BASE + 0xC0)
+					/* SPI/MPI Core Data reg        */
+#define SMPI_CORE_CTRL_REG	regptr(MSP_PER_BASE + 0xC4)
+					/* SPI/MPI Core Control reg     */
+#define SMPI_CORE_STAT_REG	regptr(MSP_PER_BASE + 0xC8)
+					/* SPI/MPI Core Status reg      */
+#define SMPI_CORE_SSEL_REG	regptr(MSP_PER_BASE + 0xCC)
+					/* SPI/MPI Core Ssel reg        */
+#define SMPI_FIFO_REG		regptr(MSP_PER_BASE + 0xD0)
+					/* SPI/MPI Data FIFO reg        */
+
+/* Peripheral Block Error Registers           */
+#define PER_ERR_STS_REG		regptr(MSP_PER_BASE + 0x70)
+					/* Error Bit Status Register    */
+#define PER_ERR_MSK_REG		regptr(MSP_PER_BASE + 0x74)
+					/* Error Bit Mask Register      */
+#define PER_HDR1_REG		regptr(MSP_PER_BASE + 0x78)
+					/* Error Header 1 Register      */
+#define PER_HDR2_REG		regptr(MSP_PER_BASE + 0x7C)
+					/* Error Header 2 Register      */
+
+/* Peripheral Block Interrupt Registers       */
+#define PER_INT_STS_REG		regptr(MSP_PER_BASE + 0x80)
+					/* Interrupt status register    */
+#define PER_INT_MSK_REG		regptr(MSP_PER_BASE + 0x84)
+					/* Interrupt Mask Register      */
+#define GPIO_INT_STS_REG	regptr(MSP_PER_BASE + 0x88)
+					/* GPIO interrupt status reg    */
+#define GPIO_INT_MSK_REG	regptr(MSP_PER_BASE + 0x8C)
+					/* GPIO interrupt MASK Reg      */
+
+/* POLO GPIO registers                        */
+#define POLO_GPIO_DAT1_REG	regptr(MSP_PER_BASE + 0x0E0)
+					/* Polo GPIO[8:0]  data reg     */
+#define POLO_GPIO_CFG1_REG	regptr(MSP_PER_BASE + 0x0E4)
+					/* Polo GPIO[7:0]  config reg   */
+#define POLO_GPIO_CFG2_REG	regptr(MSP_PER_BASE + 0x0E8)
+					/* Polo GPIO[15:8] config reg   */
+#define POLO_GPIO_OD1_REG	regptr(MSP_PER_BASE + 0x0EC)
+					/* Polo GPIO[31:0] output drive */
+#define POLO_GPIO_CFG3_REG	regptr(MSP_PER_BASE + 0x170)
+					/* Polo GPIO[23:16] config reg  */
+#define POLO_GPIO_DAT2_REG	regptr(MSP_PER_BASE + 0x174)
+					/* Polo GPIO[15:9]  data reg    */
+#define POLO_GPIO_DAT3_REG	regptr(MSP_PER_BASE + 0x178)
+					/* Polo GPIO[23:16]  data reg   */
+#define POLO_GPIO_DAT4_REG	regptr(MSP_PER_BASE + 0x17C)
+					/* Polo GPIO[31:24]  data reg   */
+#define POLO_GPIO_DAT5_REG	regptr(MSP_PER_BASE + 0x180)
+					/* Polo GPIO[39:32]  data reg   */
+#define POLO_GPIO_DAT6_REG	regptr(MSP_PER_BASE + 0x184)
+					/* Polo GPIO[47:40]  data reg   */
+#define POLO_GPIO_DAT7_REG	regptr(MSP_PER_BASE + 0x188)
+					/* Polo GPIO[54:48]  data reg   */
+#define POLO_GPIO_CFG4_REG	regptr(MSP_PER_BASE + 0x18C)
+					/* Polo GPIO[31:24] config reg  */
+#define POLO_GPIO_CFG5_REG	regptr(MSP_PER_BASE + 0x190)
+					/* Polo GPIO[39:32] config reg  */
+#define POLO_GPIO_CFG6_REG	regptr(MSP_PER_BASE + 0x194)
+					/* Polo GPIO[47:40] config reg  */
+#define POLO_GPIO_CFG7_REG	regptr(MSP_PER_BASE + 0x198)
+					/* Polo GPIO[54:48] config reg  */
+#define POLO_GPIO_OD2_REG	regptr(MSP_PER_BASE + 0x19C)
+					/* Polo GPIO[54:32] output drive */
+
+/* Generic GPIO registers                     */
+#define GPIO_DATA1_REG		regptr(MSP_PER_BASE + 0x170)
+					/* GPIO[1:0] data register      */
+#define GPIO_DATA2_REG		regptr(MSP_PER_BASE + 0x174)
+					/* GPIO[5:2] data register      */
+#define GPIO_DATA3_REG		regptr(MSP_PER_BASE + 0x178)
+					/* GPIO[9:6] data register      */
+#define GPIO_DATA4_REG		regptr(MSP_PER_BASE + 0x17C)
+					/* GPIO[15:10] data register    */
+#define GPIO_CFG1_REG		regptr(MSP_PER_BASE + 0x180)
+					/* GPIO[1:0] config register    */
+#define GPIO_CFG2_REG		regptr(MSP_PER_BASE + 0x184)
+					/* GPIO[5:2] config register    */
+#define GPIO_CFG3_REG		regptr(MSP_PER_BASE + 0x188)
+					/* GPIO[9:6] config register    */
+#define GPIO_CFG4_REG		regptr(MSP_PER_BASE + 0x18C)
+					/* GPIO[15:10] config register  */
+#define GPIO_OD_REG		regptr(MSP_PER_BASE + 0x190)
+					/* GPIO[15:0] output drive      */
+
+/*
+ ***************************************************************************
+ * CPU Interface register definitions                                      *
+ ***************************************************************************
+ */
+#define PCI_FLUSH_REG		regptr(MSP_CPUIF_BASE + 0x00)
+					/* PCI-SDRAM queue flush trigger */
+#define OCP_ERR1_REG		regptr(MSP_CPUIF_BASE + 0x04)
+					/* OCP Error Attribute 1        */
+#define OCP_ERR2_REG		regptr(MSP_CPUIF_BASE + 0x08)
+					/* OCP Error Attribute 2        */
+#define OCP_STS_REG		regptr(MSP_CPUIF_BASE + 0x0C)
+					/* OCP Error Status             */
+#define CPUIF_PM_REG		regptr(MSP_CPUIF_BASE + 0x10)
+					/* CPU policy configuration     */
+#define CPUIF_CFG_REG		regptr(MSP_CPUIF_BASE + 0x10)
+					/* Misc configuration options   */
+
+/* Central Interrupt Controller Registers */
+#define MSP_CIC_BASE		(MSP_CPUIF_BASE + 0x8000)
+					/* Central Interrupt registers  */
+#define CIC_EXT_CFG_REG		regptr(MSP_CIC_BASE + 0x00)
+					/* External interrupt config    */
+#define CIC_STS_REG		regptr(MSP_CIC_BASE + 0x04)
+					/* CIC Interrupt Status         */
+#define CIC_VPE0_MSK_REG	regptr(MSP_CIC_BASE + 0x08)
+					/* VPE0 Interrupt Mask          */
+#define CIC_VPE1_MSK_REG	regptr(MSP_CIC_BASE + 0x0C)
+					/* VPE1 Interrupt Mask          */
+#define CIC_TC0_MSK_REG		regptr(MSP_CIC_BASE + 0x10)
+					/* Thread Context 0 Int Mask    */
+#define CIC_TC1_MSK_REG		regptr(MSP_CIC_BASE + 0x14)
+					/* Thread Context 1 Int Mask    */
+#define CIC_TC2_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 2 Int Mask    */
+#define CIC_TC3_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 3 Int Mask    */
+#define CIC_TC4_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 4 Int Mask    */
+#define CIC_PCIMSI_STS_REG	regptr(MSP_CIC_BASE + 0x18)
+#define CIC_PCIMSI_MSK_REG	regptr(MSP_CIC_BASE + 0x18)
+#define CIC_PCIFLSH_REG		regptr(MSP_CIC_BASE + 0x18)
+#define CIC_VPE0_SWINT_REG	regptr(MSP_CIC_BASE + 0x08)
+
+
+/*
+ ***************************************************************************
+ * Memory controller registers                                             *
+ ***************************************************************************
+ */
+#define MEM_CFG1_REG		regptr(MSP_MEM_CFG_BASE + 0x00)
+#define MEM_SS_ADDR		regptr(MSP_MEM_CFG_BASE + 0x00)
+#define MEM_SS_DATA		regptr(MSP_MEM_CFG_BASE + 0x04)
+#define MEM_SS_WRITE		regptr(MSP_MEM_CFG_BASE + 0x08)
+
+/*
+ ***************************************************************************
+ * PCI controller registers                                                *
+ ***************************************************************************
+ */
+#define PCI_BASE_REG		regptr(MSP_PCI_BASE + 0x00)
+#define PCI_CONFIG_SPACE_REG	regptr(MSP_PCI_BASE + 0x800)
+#define PCI_JTAG_DEVID_REG	regptr(MSP_SLP_BASE + 0x13c)
+
+/*
+ ########################################################################
+ #  Register content & macro definitions                                #
+ ########################################################################
+ */
+
+/*
+ ***************************************************************************
+ * DEV_ID defines                                                          *
+ ***************************************************************************
+ */
+#define DEV_ID_PCI_DIS		(1 << 26)       /* Set if PCI disabled */
+#define DEV_ID_PCI_HOST		(1 << 20)       /* Set if PCI host */
+#define DEV_ID_SINGLE_PC	(1 << 19)       /* Set if single PC Card */
+#define DEV_ID_FAMILY		(0xff << 8)     /* family ID code */
+#define POLO_ZEUS_SUB_FAMILY	(0x7  << 16)    /* sub family for Polo/Zeus */
+
+#define MSPFPGA_ID		(0x00  << 8)    /* you are on your own here */
+#define MSP5000_ID		(0x50  << 8)
+#define MSP4F00_ID		(0x4f  << 8)    /* FPGA version of MSP4200 */
+#define MSP4E00_ID		(0x4f  << 8)    /* FPGA version of MSP7120 */
+#define MSP4200_ID		(0x42  << 8)
+#define MSP4000_ID		(0x40  << 8)
+#define MSP2XXX_ID		(0x20  << 8)
+#define MSPZEUS_ID		(0x10  << 8)
+
+#define MSP2004_SUB_ID		(0x0   << 16)
+#define MSP2005_SUB_ID		(0x1   << 16)
+#define MSP2006_SUB_ID		(0x1   << 16)
+#define MSP2007_SUB_ID		(0x2   << 16)
+#define MSP2010_SUB_ID		(0x3   << 16)
+#define MSP2015_SUB_ID		(0x4   << 16)
+#define MSP2020_SUB_ID		(0x5   << 16)
+#define MSP2100_SUB_ID		(0x6   << 16)
+
+/*
+ ***************************************************************************
+ * RESET defines                                                           *
+ ***************************************************************************
+ */
+#define MSP_GR_RST		(0x01 << 0)     /* Global reset bit     */
+#define MSP_MR_RST		(0x01 << 1)     /* MIPS reset bit       */
+#define MSP_PD_RST		(0x01 << 2)     /* PVC DMA reset bit    */
+#define MSP_PP_RST		(0x01 << 3)     /* PVC reset bit        */
+/* reserved                                                             */
+#define MSP_EA_RST		(0x01 << 6)     /* Mac A reset bit      */
+#define MSP_EB_RST		(0x01 << 7)     /* Mac B reset bit      */
+#define MSP_SE_RST		(0x01 << 8)     /* Security Eng reset bit */
+#define MSP_PB_RST		(0x01 << 9)     /* Per block reset bit  */
+#define MSP_EC_RST		(0x01 << 10)    /* Mac C reset bit      */
+#define MSP_TW_RST		(0x01 << 11)    /* TWI reset bit        */
+#define MSP_SPI_RST		(0x01 << 12)    /* SPI/MPI reset bit    */
+#define MSP_U1_RST		(0x01 << 13)    /* UART1 reset bit      */
+#define MSP_U0_RST		(0x01 << 14)    /* UART0 reset bit      */
+
+/*
+ ***************************************************************************
+ * UART defines                                                            *
+ ***************************************************************************
+ */
+#define MSP_BASE_BAUD		25000000
+#define MSP_UART_REG_LEN	0x20
+
+/*
+ ***************************************************************************
+ * ELB defines                                                             *
+ ***************************************************************************
+ */
+#define PCCARD_32		0x02    /* Set if is PCCARD 32 (Cardbus) */
+#define SINGLE_PCCARD		0x01    /* Set to enable single PC card */
+
+/*
+ ***************************************************************************
+ * CIC defines                                                             *
+ ***************************************************************************
+ */
+
+/* CIC_EXT_CFG_REG */
+#define EXT_INT_POL(eirq)			(1 << (eirq + 8))
+#define EXT_INT_EDGE(eirq)			(1 << eirq)
+
+#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq)	(reg &= ~EXT_INT_EDGE(eirq))
+#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq)	(reg |= EXT_INT_EDGE(eirq))
+#define CIC_EXT_SET_ACTIVE_HI(reg, eirq)	(reg |= EXT_INT_POL(eirq))
+#define CIC_EXT_SET_ACTIVE_LO(reg, eirq)	(reg &= ~EXT_INT_POL(eirq))
+#define CIC_EXT_SET_ACTIVE_RISING		CIC_EXT_SET_ACTIVE_HI
+#define CIC_EXT_SET_ACTIVE_FALLING		CIC_EXT_SET_ACTIVE_LO
+
+#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \
+				((reg & EXT_INT_EDGE(eirq)) == 0)
+#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq)	(reg & EXT_INT_EDGE(eirq))
+#define CIC_EXT_IS_ACTIVE_HI(reg, eirq)		(reg & EXT_INT_POL(eirq))
+#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \
+				((reg & EXT_INT_POL(eirq)) == 0)
+#define CIC_EXT_IS_ACTIVE_RISING		CIC_EXT_IS_ACTIVE_HI
+#define CIC_EXT_IS_ACTIVE_FALLING		CIC_EXT_IS_ACTIVE_LO
+
+/*
+ ***************************************************************************
+ * Memory Controller defines                                               *
+ ***************************************************************************
+ */
+
+/* Indirect memory controller registers */
+#define DDRC_CFG(n)		(n)
+#define DDRC_DEBUG(n)		(0x04 + n)
+#define DDRC_CTL(n)		(0x40 + n)
+
+/* Macro to perform DDRC indirect write */
+#define DDRC_INDIRECT_WRITE(reg, mask, value) \
+({ \
+	*MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \
+	*MEM_SS_DATA = (value); \
+	*MEM_SS_WRITE = 1; \
+})
+
+/*
+ ***************************************************************************
+ * SPI/MPI Mode                                                            *
+ ***************************************************************************
+ */
+#define SPI_MPI_RX_BUSY		0x00008000	/* SPI/MPI Receive Busy */
+#define SPI_MPI_FIFO_EMPTY	0x00004000	/* SPI/MPI Fifo Empty   */
+#define SPI_MPI_TX_BUSY		0x00002000	/* SPI/MPI Transmit Busy */
+#define SPI_MPI_FIFO_FULL	0x00001000	/* SPI/MPU FIFO full    */
+
+/*
+ ***************************************************************************
+ * SPI/MPI Control Register                                                *
+ ***************************************************************************
+ */
+#define SPI_MPI_RX_START	0x00000004	/* Start receive command */
+#define SPI_MPI_FLUSH_Q		0x00000002	/* Flush SPI/MPI Queue */
+#define SPI_MPI_TX_START	0x00000001	/* Start Transmit Command */
+
+#endif /* !_ASM_MSP_REGS_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h
new file mode 100644
index 0000000..96d4c8c
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h
@@ -0,0 +1,141 @@
+/*
+ * Defines for the MSP interrupt controller.
+ *
+ * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_SLP_INT_H
+#define _MSP_SLP_INT_H
+
+/*
+ * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded
+ * hierarchical system.  The first level are the direct MIPS interrupts
+ * and are assigned the interrupt range 0-7.  The second level is the SLM
+ * interrupt controller and is assigned the range 8-39.  The third level
+ * comprises the Peripherial block, the PCI block, the PCI MSI block and
+ * the SLP.  The PCI interrupts and the SLP errors are handled by the
+ * relevant subsystems so the core interrupt code needs only concern
+ * itself with the Peripheral block.  These are assigned interrupts in
+ * the range 40-71.
+ */
+
+/*
+ * IRQs directly connected to CPU
+ */
+#define MSP_MIPS_INTBASE	0
+#define MSP_INT_SW0		0  /* IRQ for swint0,         C_SW0  */
+#define MSP_INT_SW1		1  /* IRQ for swint1,         C_SW1  */
+#define MSP_INT_MAC0 		2  /* IRQ for MAC 0,          C_IRQ0 */
+#define MSP_INT_MAC1		3  /* IRQ for MAC 1,          C_IRQ1 */
+#define MSP_INT_C_IRQ2		4  /* Wired off,              C_IRQ2 */
+#define MSP_INT_VE		5  /* IRQ for Voice Engine,   C_IRQ3 */
+#define MSP_INT_SLP		6  /* IRQ for SLM block,      C_IRQ4 */
+#define MSP_INT_TIMER		7  /* IRQ for the MIPS timer, C_IRQ5 */
+
+/*
+ * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
+ * These defines should be tied to the register definition for the SLM
+ * interrupt routine.  For now, just use hard-coded values.
+ */
+#define MSP_SLP_INTBASE		(MSP_MIPS_INTBASE + 8)
+#define MSP_INT_EXT0		(MSP_SLP_INTBASE + 0)
+					/* External interrupt 0         */
+#define MSP_INT_EXT1		(MSP_SLP_INTBASE + 1)
+					/* External interrupt 1         */
+#define MSP_INT_EXT2		(MSP_SLP_INTBASE + 2)
+					/* External interrupt 2         */
+#define MSP_INT_EXT3		(MSP_SLP_INTBASE + 3)
+					/* External interrupt 3         */
+/* Reserved					   4-7                  */
+
+/*
+ *************************************************************************
+ * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER *
+ * Some MSP produces have this interrupt labelled as Voice and some are  *
+ * SEC mbox ...                                                          *
+ *************************************************************************
+ */
+#define MSP_INT_SLP_VE		(MSP_SLP_INTBASE + 8)
+					/* Cascaded IRQ for Voice Engine*/
+#define MSP_INT_SLP_TDM		(MSP_SLP_INTBASE + 9)
+					/* TDM interrupt                */
+#define MSP_INT_SLP_MAC0	(MSP_SLP_INTBASE + 10)
+					/* Cascaded IRQ for MAC 0       */
+#define MSP_INT_SLP_MAC1	(MSP_SLP_INTBASE + 11)
+					/* Cascaded IRQ for MAC 1       */
+#define MSP_INT_SEC		(MSP_SLP_INTBASE + 12)
+					/* IRQ for security engine      */
+#define	MSP_INT_PER		(MSP_SLP_INTBASE + 13)
+					/* Peripheral interrupt         */
+#define	MSP_INT_TIMER0		(MSP_SLP_INTBASE + 14)
+					/* SLP timer 0                  */
+#define	MSP_INT_TIMER1		(MSP_SLP_INTBASE + 15)
+					/* SLP timer 1                  */
+#define	MSP_INT_TIMER2		(MSP_SLP_INTBASE + 16)
+					/* SLP timer 2                  */
+#define	MSP_INT_SLP_TIMER	(MSP_SLP_INTBASE + 17)
+					/* Cascaded MIPS timer          */
+#define MSP_INT_BLKCP		(MSP_SLP_INTBASE + 18)
+					/* Block Copy                   */
+#define MSP_INT_UART0		(MSP_SLP_INTBASE + 19)
+					/* UART 0                       */
+#define MSP_INT_PCI		(MSP_SLP_INTBASE + 20)
+					/* PCI subsystem                */
+#define MSP_INT_PCI_DBELL	(MSP_SLP_INTBASE + 21)
+					/* PCI doorbell                 */
+#define MSP_INT_PCI_MSI		(MSP_SLP_INTBASE + 22)
+					/* PCI Message Signal           */
+#define MSP_INT_PCI_BC0		(MSP_SLP_INTBASE + 23)
+					/* PCI Block Copy 0             */
+#define MSP_INT_PCI_BC1		(MSP_SLP_INTBASE + 24)
+					/* PCI Block Copy 1             */
+#define MSP_INT_SLP_ERR		(MSP_SLP_INTBASE + 25)
+					/* SLP error condition          */
+#define MSP_INT_MAC2		(MSP_SLP_INTBASE + 26)
+					/* IRQ for MAC2                 */
+/* Reserved					   26-31                */
+
+/*
+ * IRQs cascaded on SLP PER interrupt (MSP_INT_PER)
+ */
+#define MSP_PER_INTBASE		(MSP_SLP_INTBASE + 32)
+/* Reserved					   0-1                  */
+#define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
+					/* UART 1                       */
+/* Reserved					   3-5                  */
+#define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
+					/* 2-wire                       */
+#define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
+					/* Peripheral timer block out 0 */
+#define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
+					/* Peripheral timer block out 1 */
+/* Reserved					   9                    */
+#define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
+					/* SPI RX complete              */
+#define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
+					/* SPI TX complete              */
+#define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
+					/* GPIO                         */
+#define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
+					/* Peripheral error             */
+/* Reserved					   14-31                */
+
+#endif /* !_MSP_SLP_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
new file mode 100644
index 0000000..0bf48fc
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H
+#define __ASM_MIPS_PMC_SIERRA_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
+	defined(CONFIG_PMC_MSP7120_FPGA)
+#define MIPS34K_MISSED_ITLB_WAR         1
+#endif
+
+#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */
diff --git a/arch/mips/include/asm/pmon.h b/arch/mips/include/asm/pmon.h
new file mode 100644
index 0000000..6ad5191
--- /dev/null
+++ b/arch/mips/include/asm/pmon.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * The cpustart method is a PMC-Sierra's function to start the secondary CPU.
+ * Stock PMON 2000 has the smpfork, semlock and semunlock methods instead.
+ */
+#ifndef _ASM_PMON_H
+#define _ASM_PMON_H
+
+struct callvectors {
+	int	(*open) (char*, int, int);
+	int	(*close) (int);
+	int	(*read) (int, void*, int);
+	int	(*write) (int, void*, int);
+	off_t	(*lseek) (int, off_t, int);
+	int	(*printf) (const char*, ...);
+	void	(*cacheflush) (void);
+	char*	(*gets) (char*);
+	union {
+		int	(*smpfork) (unsigned long cp, char *sp);
+		int	(*cpustart) (long, void (*)(void), void *, long);
+	} _s;
+	int	(*semlock) (int sem);
+	void	(*semunlock) (int sem);
+};
+
+extern struct callvectors *debug_vectors;
+
+#define pmon_open(name, flags, mode)	debug_vectors->open(name, flage, mode)
+#define pmon_close(fd)			debug_vectors->close(fd)
+#define pmon_read(fd, buf, count)	debug_vectors->read(fd, buf, count)
+#define pmon_write(fd, buf, count)	debug_vectors->write(fd, buf, count)
+#define pmon_lseek(fd, off, whence)	debug_vectors->lseek(fd, off, whence)
+#define pmon_printf(fmt...)		debug_vectors->printf(fmt)
+#define pmon_cacheflush()		debug_vectors->cacheflush()
+#define pmon_gets(s)			debug_vectors->gets(s)
+#define pmon_cpustart(n, f, sp, gp)	debug_vectors->_s.cpustart(n, f, sp, gp)
+#define pmon_smpfork(cp, sp)		debug_vectors->_s.smpfork(cp, sp)
+#define pmon_semlock(sem)		debug_vectors->semlock(sem)
+#define pmon_semunlock(sem)		debug_vectors->semunlock(sem)
+
+#endif /* _ASM_PMON_H */
diff --git a/arch/mips/include/asm/poll.h b/arch/mips/include/asm/poll.h
new file mode 100644
index 0000000..47b9520
--- /dev/null
+++ b/arch/mips/include/asm/poll.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_POLL_H
+#define __ASM_POLL_H
+
+#define POLLWRNORM	POLLOUT
+#define POLLWRBAND	0x0100
+
+#include <asm-generic/poll.h>
+
+#endif /* __ASM_POLL_H */
diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h
new file mode 100644
index 0000000..c200102
--- /dev/null
+++ b/arch/mips/include/asm/posix_types.h
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+#include <asm/sgidefs.h>
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned long	__kernel_nlink_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef unsigned int	__kernel_nlink_t;
+#endif
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+#endif
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef long		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+typedef __kernel_uid_t	__kernel_old_uid_t;
+typedef __kernel_gid_t	__kernel_old_gid_t;
+typedef unsigned int	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long      __kernel_loff_t;
+#endif
+
+typedef struct {
+#if (_MIPS_SZLONG == 32)
+	long	val[2];
+#endif
+#if (_MIPS_SZLONG == 64)
+	int	val[2];
+#endif
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_POSIX_TYPES_H */
diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h
new file mode 100644
index 0000000..1785083
--- /dev/null
+++ b/arch/mips/include/asm/prefetch.h
@@ -0,0 +1,87 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_PREFETCH_H
+#define __ASM_PREFETCH_H
+
+
+/*
+ * R5000 and RM5200 implements pref and prefx instructions but they're nops, so
+ * rather than wasting time we pretend these processors don't support
+ * prefetching at all.
+ *
+ * R5432 implements Load, Store, LoadStreamed, StoreStreamed, LoadRetained,
+ * StoreRetained and WriteBackInvalidate but not Pref_PrepareForStore.
+ *
+ * Hell (and the book on my shelf I can't open ...) know what the R8000 does.
+ *
+ * RM7000 version 1.0 interprets all hints as Pref_Load; version 2.0 implements
+ * Pref_PrepareForStore also.
+ *
+ * RM9000 is MIPS IV but implements prefetching like MIPS32/MIPS64; it's
+ * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in
+ * current versions due to erratum G105.
+ *
+ * VR7701 only implements the Load prefetch.
+ *
+ * Finally MIPS32 and MIPS64 implement all of the following hints.
+ */
+
+#define Pref_Load			0
+#define Pref_Store			1
+						/* 2 and 3 are reserved */
+#define Pref_LoadStreamed		4
+#define Pref_StoreStreamed		5
+#define Pref_LoadRetained		6
+#define Pref_StoreRetained		7
+						/* 8 ... 24 are reserved */
+#define Pref_WriteBackInvalidate	25
+#define Pref_PrepareForStore		30
+
+#ifdef __ASSEMBLY__
+
+	.macro	__pref hint addr
+#ifdef CONFIG_CPU_HAS_PREFETCH
+	pref	\hint, \addr
+#endif
+	.endm
+
+	.macro	pref_load addr
+	__pref	Pref_Load, \addr
+	.endm
+
+	.macro	pref_store addr
+	__pref	Pref_Store, \addr
+	.endm
+
+	.macro	pref_load_streamed addr
+	__pref	Pref_LoadStreamed, \addr
+	.endm
+
+	.macro	pref_store_streamed addr
+	__pref	Pref_StoreStreamed, \addr
+	.endm
+
+	.macro	pref_load_retained addr
+	__pref	Pref_LoadRetained, \addr
+	.endm
+
+	.macro	pref_store_retained addr
+	__pref	Pref_StoreRetained, \addr
+	.endm
+
+	.macro	pref_wback_inv addr
+	__pref	Pref_WriteBackInvalidate, \addr
+	.endm
+
+	.macro	pref_prepare_for_store addr
+	__pref	Pref_PrepareForStore, \addr
+	.endm
+
+#endif
+
+#endif /* __ASM_PREFETCH_H */
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
new file mode 100644
index 0000000..18ee58e
--- /dev/null
+++ b/arch/mips/include/asm/processor.h
@@ -0,0 +1,283 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 Waldorf GMBH
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <linux/cpumask.h>
+#include <linux/threads.h>
+
+#include <asm/cachectl.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/mipsregs.h>
+#include <asm/prefetch.h>
+#include <asm/system.h>
+
+/*
+ * Return current * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+/*
+ * System setup and hardware flags..
+ */
+extern void (*cpu_wait)(void);
+
+extern unsigned int vced_count, vcei_count;
+
+#ifdef CONFIG_32BIT
+/*
+ * User space process size: 2GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	0x7fff8000UL
+#define STACK_TOP	TASK_SIZE
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	((TASK_SIZE / 3) & ~(PAGE_SIZE))
+#endif
+
+#ifdef CONFIG_64BIT
+/*
+ * User space process size: 1TB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.  TASK_SIZE
+ * is limited to 1TB by the R4000 architecture; R10000 and better can
+ * support 16TB; the architectural reserve for future expansion is
+ * 8192EB ...
+ */
+#define TASK_SIZE32	0x7fff8000UL
+#define TASK_SIZE	0x10000000000UL
+#define STACK_TOP	\
+      (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE						\
+	(test_thread_flag(TIF_32BIT_ADDR) ?				\
+		PAGE_ALIGN(TASK_SIZE32 / 3) : PAGE_ALIGN(TASK_SIZE / 3))
+#define TASK_SIZE_OF(tsk)						\
+	(test_tsk_thread_flag(tsk, TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
+#endif
+
+#ifdef __KERNEL__
+#define STACK_TOP_MAX	TASK_SIZE
+#endif
+
+#define NUM_FPU_REGS	32
+
+typedef __u64 fpureg_t;
+
+/*
+ * It would be nice to add some more fields for emulator statistics, but there
+ * are a number of fixed offsets in offset.h and elsewhere that would have to
+ * be recalculated by hand.  So the additional information will be private to
+ * the FPU emulator for now.  See asm-mips/fpu_emulator.h.
+ */
+
+struct mips_fpu_struct {
+	fpureg_t	fpr[NUM_FPU_REGS];
+	unsigned int	fcr31;
+};
+
+#define NUM_DSP_REGS   6
+
+typedef __u32 dspreg_t;
+
+struct mips_dsp_state {
+	dspreg_t        dspr[NUM_DSP_REGS];
+	unsigned int    dspcontrol;
+};
+
+#define INIT_CPUMASK { \
+	{0,} \
+}
+
+struct mips3264_watch_reg_state {
+	/* The width of watchlo is 32 in a 32 bit kernel and 64 in a
+	   64 bit kernel.  We use unsigned long as it has the same
+	   property. */
+	unsigned long watchlo[NUM_WATCH_REGS];
+	/* Only the mask and IRW bits from watchhi. */
+	u16 watchhi[NUM_WATCH_REGS];
+};
+
+union mips_watch_reg_state {
+	struct mips3264_watch_reg_state mips3264;
+};
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define ARCH_MIN_TASKALIGN	8
+
+struct mips_abi;
+
+/*
+ * If you change thread_struct remember to change the #defines below too!
+ */
+struct thread_struct {
+	/* Saved main processor registers. */
+	unsigned long reg16;
+	unsigned long reg17, reg18, reg19, reg20, reg21, reg22, reg23;
+	unsigned long reg29, reg30, reg31;
+
+	/* Saved cp0 stuff. */
+	unsigned long cp0_status;
+
+	/* Saved fpu/fpu emulator stuff. */
+	struct mips_fpu_struct fpu;
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* Emulated instruction count */
+	unsigned long emulated_fp;
+	/* Saved per-thread scheduler affinity mask */
+	cpumask_t user_cpus_allowed;
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+	/* Saved state of the DSP ASE, if available. */
+	struct mips_dsp_state dsp;
+
+	/* Saved watch register state, if available. */
+	union mips_watch_reg_state watch;
+
+	/* Other stuff associated with the thread. */
+	unsigned long cp0_badvaddr;	/* Last user fault */
+	unsigned long cp0_baduaddr;	/* Last kernel fault accessing USEG */
+	unsigned long error_code;
+	unsigned long trap_no;
+	unsigned long irix_trampoline;  /* Wheee... */
+	unsigned long irix_oldctx;
+	struct mips_abi *abi;
+};
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+#define FPAFF_INIT						\
+	.emulated_fp			= 0,			\
+	.user_cpus_allowed		= INIT_CPUMASK,
+#else
+#define FPAFF_INIT
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+#define INIT_THREAD  {						\
+        /*							\
+         * Saved main processor registers			\
+         */							\
+	.reg16			= 0,				\
+	.reg17			= 0,				\
+	.reg18			= 0,				\
+	.reg19			= 0,				\
+	.reg20			= 0,				\
+	.reg21			= 0,				\
+	.reg22			= 0,				\
+	.reg23			= 0,				\
+	.reg29			= 0,				\
+	.reg30			= 0,				\
+	.reg31			= 0,				\
+	/*							\
+	 * Saved cp0 stuff					\
+	 */							\
+	.cp0_status		= 0,				\
+	/*							\
+	 * Saved FPU/FPU emulator stuff				\
+	 */							\
+	.fpu			= {				\
+		.fpr		= {0,},				\
+		.fcr31		= 0,				\
+	},							\
+	/*							\
+	 * FPU affinity state (null if not FPAFF)		\
+	 */							\
+	FPAFF_INIT						\
+	/*							\
+	 * Saved DSP stuff					\
+	 */							\
+	.dsp			= {				\
+		.dspr		= {0, },			\
+		.dspcontrol	= 0,				\
+	},							\
+	/*							\
+	 * saved watch register stuff				\
+	 */							\
+	.watch = {{{0,},},},					\
+	/*							\
+	 * Other stuff associated with the process		\
+	 */							\
+	.cp0_badvaddr		= 0,				\
+	.cp0_baduaddr		= 0,				\
+	.error_code		= 0,				\
+	.trap_no		= 0,				\
+	.irix_trampoline	= 0,				\
+	.irix_oldctx		= 0,				\
+}
+
+struct task_struct;
+
+/* Free all resources held by a thread. */
+#define release_thread(thread) do { } while(0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32)
+#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1)
+#define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc)
+#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
+#define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
+
+#define cpu_relax()	barrier()
+
+/*
+ * Return_address is a replacement for __builtin_return_address(count)
+ * which on certain architectures cannot reasonably be implemented in GCC
+ * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386).
+ * Note that __builtin_return_address(x>=1) is forbidden because GCC
+ * aborts compilation on some CPUs.  It's simply not possible to unwind
+ * some CPU's stackframes.
+ *
+ * __builtin_return_address works only for non-leaf functions.  We avoid the
+ * overhead of a function call by forcing the compiler to save the return
+ * address register on the stack.
+ */
+#define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);})
+
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define ARCH_HAS_PREFETCH
+
+static inline void prefetch(const void *addr)
+{
+	__asm__ __volatile__(
+	"	.set	mips4		\n"
+	"	pref	%0, (%1)	\n"
+	"	.set	mips0		\n"
+	:
+	: "i" (Pref_Load), "r" (addr));
+}
+
+#endif
+
+#endif /* _ASM_PROCESSOR_H */
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
new file mode 100644
index 0000000..9c22571
--- /dev/null
+++ b/arch/mips/include/asm/ptrace.h
@@ -0,0 +1,154 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#ifdef CONFIG_64BIT
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+#endif
+
+/* 0 - 31 are integer registers, 32 - 63 are fp registers.  */
+#define FPR_BASE	32
+#define PC		64
+#define CAUSE		65
+#define BADVADDR	66
+#define MMHI		67
+#define MMLO		68
+#define FPC_CSR		69
+#define FPC_EIR		70
+#define DSP_BASE	71		/* 3 more hi / lo register pairs */
+#define DSP_CONTROL	77
+#define ACX		78
+
+/*
+ * This struct defines the way the registers are stored on the stack during a
+ * system call/exception. As usual the registers k0/k1 aren't being saved.
+ */
+struct pt_regs {
+#ifdef CONFIG_32BIT
+	/* Pad bytes for argument save space on the stack. */
+	unsigned long pad0[6];
+#endif
+
+	/* Saved main processor registers. */
+	unsigned long regs[32];
+
+	/* Saved special registers. */
+	unsigned long cp0_status;
+	unsigned long hi;
+	unsigned long lo;
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	unsigned long acx;
+#endif
+	unsigned long cp0_badvaddr;
+	unsigned long cp0_cause;
+	unsigned long cp0_epc;
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long cp0_tcstatus;
+#endif /* CONFIG_MIPS_MT_SMTC */
+} __attribute__ ((aligned (8)));
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS		14
+#define PTRACE_SETFPREGS		15
+/* #define PTRACE_GETFPXREGS		18 */
+/* #define PTRACE_SETFPXREGS		19 */
+
+#define PTRACE_OLDSETOPTIONS	21
+
+#define PTRACE_GET_THREAD_AREA	25
+#define PTRACE_SET_THREAD_AREA	26
+
+/* Calls to trace a 64bit program from a 32bit program.  */
+#define PTRACE_PEEKTEXT_3264	0xc0
+#define PTRACE_PEEKDATA_3264	0xc1
+#define PTRACE_POKETEXT_3264	0xc2
+#define PTRACE_POKEDATA_3264	0xc3
+#define PTRACE_GET_THREAD_AREA_3264	0xc4
+
+/* Read and write watchpoint registers.  */
+enum pt_watch_style {
+	pt_watch_style_mips32,
+	pt_watch_style_mips64
+};
+struct mips32_watch_regs {
+	uint32_t watchlo[8];
+	/* Lower 16 bits of watchhi. */
+	uint16_t watchhi[8];
+	/* Valid mask and I R W bits.
+	 * bit 0 -- 1 if W bit is usable.
+	 * bit 1 -- 1 if R bit is usable.
+	 * bit 2 -- 1 if I bit is usable.
+	 * bits 3 - 11 -- Valid watchhi mask bits.
+	 */
+	uint16_t watch_masks[8];
+	/* The number of valid watch register pairs.  */
+	uint32_t num_valid;
+} __attribute__((aligned(8)));
+
+struct mips64_watch_regs {
+	uint64_t watchlo[8];
+	uint16_t watchhi[8];
+	uint16_t watch_masks[8];
+	uint32_t num_valid;
+} __attribute__((aligned(8)));
+
+struct pt_watch_regs {
+	enum pt_watch_style style;
+	union {
+		struct mips32_watch_regs mips32;
+		struct mips32_watch_regs mips64;
+	};
+};
+
+#define PTRACE_GET_WATCH_REGS	0xd0
+#define PTRACE_SET_WATCH_REGS	0xd1
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <asm/isadep.h>
+
+struct task_struct;
+
+extern int ptrace_getregs(struct task_struct *child, __s64 __user *data);
+extern int ptrace_setregs(struct task_struct *child, __s64 __user *data);
+
+extern int ptrace_getfpregs(struct task_struct *child, __u32 __user *data);
+extern int ptrace_setfpregs(struct task_struct *child, __u32 __user *data);
+
+extern int ptrace_get_watch_regs(struct task_struct *child,
+	struct pt_watch_regs __user *addr);
+extern int ptrace_set_watch_regs(struct task_struct *child,
+	struct pt_watch_regs __user *addr);
+
+/*
+ * Does the process account for user or for system time?
+ */
+#define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER)
+
+#define instruction_pointer(regs) ((regs)->cp0_epc)
+#define profile_pc(regs) instruction_pointer(regs)
+
+extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
+
+extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET;
+
+static inline void die_if_kernel(const char *str, const struct pt_regs *regs)
+{
+	if (unlikely(!user_mode(regs)))
+		die(str, regs);
+}
+
+#endif
+
+#endif /* _ASM_PTRACE_H */
diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h
new file mode 100644
index 0000000..a37d12b
--- /dev/null
+++ b/arch/mips/include/asm/r4k-timer.h
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_R4K_TYPES_H
+#define __ASM_R4K_TYPES_H
+
+#include <linux/compiler.h>
+
+#ifdef CONFIG_SYNC_R4K
+
+extern void synchronise_count_master(void);
+extern void synchronise_count_slave(void);
+
+#else
+
+static inline void synchronise_count_master(void)
+{
+}
+
+static inline void synchronise_count_slave(void)
+{
+}
+
+#endif
+
+#endif /* __ASM_R4K_TYPES_H */
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
new file mode 100644
index 0000000..4c140db
--- /dev/null
+++ b/arch/mips/include/asm/r4kcache.h
@@ -0,0 +1,443 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Inline assembly cache operations.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1997 - 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_R4KCACHE_H
+#define _ASM_R4KCACHE_H
+
+#include <asm/asm.h>
+#include <asm/cacheops.h>
+#include <asm/cpu-features.h>
+#include <asm/mipsmtregs.h>
+
+/*
+ * This macro return a properly sign-extended address suitable as base address
+ * for indexed cache operations.  Two issues here:
+ *
+ *  - The MIPS32 and MIPS64 specs permit an implementation to directly derive
+ *    the index bits from the virtual address.  This breaks with tradition
+ *    set by the R4000.  To keep unpleasant surprises from happening we pick
+ *    an address in KSEG0 / CKSEG0.
+ *  - We need a properly sign extended address for 64-bit code.  To get away
+ *    without ifdefs we let the compiler do it by a type cast.
+ */
+#define INDEX_BASE	CKSEG0
+
+#define cache_op(op,addr)						\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noreorder				\n"	\
+	"	.set	mips3\n\t				\n"	\
+	"	cache	%0, %1					\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "i" (op), "R" (*(unsigned char *)(addr)))
+
+#ifdef CONFIG_MIPS_MT
+/*
+ * Temporary hacks for SMTC debug. Optionally force single-threaded
+ * execution during I-cache flushes.
+ */
+
+#define PROTECT_CACHE_FLUSHES 1
+
+#ifdef PROTECT_CACHE_FLUSHES
+
+extern int mt_protiflush;
+extern int mt_protdflush;
+extern void mt_cflush_lockdown(void);
+extern void mt_cflush_release(void);
+
+#define BEGIN_MT_IPROT \
+	unsigned long flags = 0;			\
+	unsigned long mtflags = 0;			\
+	if(mt_protiflush) {				\
+		local_irq_save(flags);			\
+		ehb();					\
+		mtflags = dvpe();			\
+		mt_cflush_lockdown();			\
+	}
+
+#define END_MT_IPROT \
+	if(mt_protiflush) {				\
+		mt_cflush_release();			\
+		evpe(mtflags);				\
+		local_irq_restore(flags);		\
+	}
+
+#define BEGIN_MT_DPROT \
+	unsigned long flags = 0;			\
+	unsigned long mtflags = 0;			\
+	if(mt_protdflush) {				\
+		local_irq_save(flags);			\
+		ehb();					\
+		mtflags = dvpe();			\
+		mt_cflush_lockdown();			\
+	}
+
+#define END_MT_DPROT \
+	if(mt_protdflush) {				\
+		mt_cflush_release();			\
+		evpe(mtflags);				\
+		local_irq_restore(flags);		\
+	}
+
+#else
+
+#define BEGIN_MT_IPROT
+#define BEGIN_MT_DPROT
+#define END_MT_IPROT
+#define END_MT_DPROT
+
+#endif /* PROTECT_CACHE_FLUSHES */
+
+#define __iflush_prologue						\
+	unsigned long redundance;					\
+	extern int mt_n_iflushes;					\
+	BEGIN_MT_IPROT							\
+	for (redundance = 0; redundance < mt_n_iflushes; redundance++) {
+
+#define __iflush_epilogue						\
+	END_MT_IPROT							\
+	}
+
+#define __dflush_prologue						\
+	unsigned long redundance;					\
+	extern int mt_n_dflushes;					\
+	BEGIN_MT_DPROT							\
+	for (redundance = 0; redundance < mt_n_dflushes; redundance++) {
+
+#define __dflush_epilogue \
+	END_MT_DPROT	 \
+	}
+
+#define __inv_dflush_prologue __dflush_prologue
+#define __inv_dflush_epilogue __dflush_epilogue
+#define __sflush_prologue {
+#define __sflush_epilogue }
+#define __inv_sflush_prologue __sflush_prologue
+#define __inv_sflush_epilogue __sflush_epilogue
+
+#else /* CONFIG_MIPS_MT */
+
+#define __iflush_prologue {
+#define __iflush_epilogue }
+#define __dflush_prologue {
+#define __dflush_epilogue }
+#define __inv_dflush_prologue {
+#define __inv_dflush_epilogue }
+#define __sflush_prologue {
+#define __sflush_epilogue }
+#define __inv_sflush_prologue {
+#define __inv_sflush_epilogue }
+
+#endif /* CONFIG_MIPS_MT */
+
+static inline void flush_icache_line_indexed(unsigned long addr)
+{
+	__iflush_prologue
+	cache_op(Index_Invalidate_I, addr);
+	__iflush_epilogue
+}
+
+static inline void flush_dcache_line_indexed(unsigned long addr)
+{
+	__dflush_prologue
+	cache_op(Index_Writeback_Inv_D, addr);
+	__dflush_epilogue
+}
+
+static inline void flush_scache_line_indexed(unsigned long addr)
+{
+	cache_op(Index_Writeback_Inv_SD, addr);
+}
+
+static inline void flush_icache_line(unsigned long addr)
+{
+	__iflush_prologue
+	cache_op(Hit_Invalidate_I, addr);
+	__iflush_epilogue
+}
+
+static inline void flush_dcache_line(unsigned long addr)
+{
+	__dflush_prologue
+	cache_op(Hit_Writeback_Inv_D, addr);
+	__dflush_epilogue
+}
+
+static inline void invalidate_dcache_line(unsigned long addr)
+{
+	__dflush_prologue
+	cache_op(Hit_Invalidate_D, addr);
+	__dflush_epilogue
+}
+
+static inline void invalidate_scache_line(unsigned long addr)
+{
+	cache_op(Hit_Invalidate_SD, addr);
+}
+
+static inline void flush_scache_line(unsigned long addr)
+{
+	cache_op(Hit_Writeback_Inv_SD, addr);
+}
+
+#define protected_cache_op(op,addr)				\
+	__asm__ __volatile__(					\
+	"	.set	push			\n"		\
+	"	.set	noreorder		\n"		\
+	"	.set	mips3			\n"		\
+	"1:	cache	%0, (%1)		\n"		\
+	"2:	.set	pop			\n"		\
+	"	.section __ex_table,\"a\"	\n"		\
+	"	"STR(PTR)" 1b, 2b		\n"		\
+	"	.previous"					\
+	:							\
+	: "i" (op), "r" (addr))
+
+/*
+ * The next two are for badland addresses like signal trampolines.
+ */
+static inline void protected_flush_icache_line(unsigned long addr)
+{
+	protected_cache_op(Hit_Invalidate_I, addr);
+}
+
+/*
+ * R10000 / R12000 hazard - these processors don't support the Hit_Writeback_D
+ * cacheop so we use Hit_Writeback_Inv_D which is supported by all R4000-style
+ * caches.  We're talking about one cacheline unnecessarily getting invalidated
+ * here so the penalty isn't overly hard.
+ */
+static inline void protected_writeback_dcache_line(unsigned long addr)
+{
+	protected_cache_op(Hit_Writeback_Inv_D, addr);
+}
+
+static inline void protected_writeback_scache_line(unsigned long addr)
+{
+	protected_cache_op(Hit_Writeback_Inv_SD, addr);
+}
+
+/*
+ * This one is RM7000-specific
+ */
+static inline void invalidate_tcache_page(unsigned long addr)
+{
+	cache_op(Page_Invalidate_T, addr);
+}
+
+#define cache16_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x010(%0)	\n"	\
+	"	cache %1, 0x020(%0); cache %1, 0x030(%0)	\n"	\
+	"	cache %1, 0x040(%0); cache %1, 0x050(%0)	\n"	\
+	"	cache %1, 0x060(%0); cache %1, 0x070(%0)	\n"	\
+	"	cache %1, 0x080(%0); cache %1, 0x090(%0)	\n"	\
+	"	cache %1, 0x0a0(%0); cache %1, 0x0b0(%0)	\n"	\
+	"	cache %1, 0x0c0(%0); cache %1, 0x0d0(%0)	\n"	\
+	"	cache %1, 0x0e0(%0); cache %1, 0x0f0(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x110(%0)	\n"	\
+	"	cache %1, 0x120(%0); cache %1, 0x130(%0)	\n"	\
+	"	cache %1, 0x140(%0); cache %1, 0x150(%0)	\n"	\
+	"	cache %1, 0x160(%0); cache %1, 0x170(%0)	\n"	\
+	"	cache %1, 0x180(%0); cache %1, 0x190(%0)	\n"	\
+	"	cache %1, 0x1a0(%0); cache %1, 0x1b0(%0)	\n"	\
+	"	cache %1, 0x1c0(%0); cache %1, 0x1d0(%0)	\n"	\
+	"	cache %1, 0x1e0(%0); cache %1, 0x1f0(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+#define cache32_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x020(%0)	\n"	\
+	"	cache %1, 0x040(%0); cache %1, 0x060(%0)	\n"	\
+	"	cache %1, 0x080(%0); cache %1, 0x0a0(%0)	\n"	\
+	"	cache %1, 0x0c0(%0); cache %1, 0x0e0(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x120(%0)	\n"	\
+	"	cache %1, 0x140(%0); cache %1, 0x160(%0)	\n"	\
+	"	cache %1, 0x180(%0); cache %1, 0x1a0(%0)	\n"	\
+	"	cache %1, 0x1c0(%0); cache %1, 0x1e0(%0)	\n"	\
+	"	cache %1, 0x200(%0); cache %1, 0x220(%0)	\n"	\
+	"	cache %1, 0x240(%0); cache %1, 0x260(%0)	\n"	\
+	"	cache %1, 0x280(%0); cache %1, 0x2a0(%0)	\n"	\
+	"	cache %1, 0x2c0(%0); cache %1, 0x2e0(%0)	\n"	\
+	"	cache %1, 0x300(%0); cache %1, 0x320(%0)	\n"	\
+	"	cache %1, 0x340(%0); cache %1, 0x360(%0)	\n"	\
+	"	cache %1, 0x380(%0); cache %1, 0x3a0(%0)	\n"	\
+	"	cache %1, 0x3c0(%0); cache %1, 0x3e0(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+#define cache64_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x040(%0)	\n"	\
+	"	cache %1, 0x080(%0); cache %1, 0x0c0(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x140(%0)	\n"	\
+	"	cache %1, 0x180(%0); cache %1, 0x1c0(%0)	\n"	\
+	"	cache %1, 0x200(%0); cache %1, 0x240(%0)	\n"	\
+	"	cache %1, 0x280(%0); cache %1, 0x2c0(%0)	\n"	\
+	"	cache %1, 0x300(%0); cache %1, 0x340(%0)	\n"	\
+	"	cache %1, 0x380(%0); cache %1, 0x3c0(%0)	\n"	\
+	"	cache %1, 0x400(%0); cache %1, 0x440(%0)	\n"	\
+	"	cache %1, 0x480(%0); cache %1, 0x4c0(%0)	\n"	\
+	"	cache %1, 0x500(%0); cache %1, 0x540(%0)	\n"	\
+	"	cache %1, 0x580(%0); cache %1, 0x5c0(%0)	\n"	\
+	"	cache %1, 0x600(%0); cache %1, 0x640(%0)	\n"	\
+	"	cache %1, 0x680(%0); cache %1, 0x6c0(%0)	\n"	\
+	"	cache %1, 0x700(%0); cache %1, 0x740(%0)	\n"	\
+	"	cache %1, 0x780(%0); cache %1, 0x7c0(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+#define cache128_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x080(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x180(%0)	\n"	\
+	"	cache %1, 0x200(%0); cache %1, 0x280(%0)	\n"	\
+	"	cache %1, 0x300(%0); cache %1, 0x380(%0)	\n"	\
+	"	cache %1, 0x400(%0); cache %1, 0x480(%0)	\n"	\
+	"	cache %1, 0x500(%0); cache %1, 0x580(%0)	\n"	\
+	"	cache %1, 0x600(%0); cache %1, 0x680(%0)	\n"	\
+	"	cache %1, 0x700(%0); cache %1, 0x780(%0)	\n"	\
+	"	cache %1, 0x800(%0); cache %1, 0x880(%0)	\n"	\
+	"	cache %1, 0x900(%0); cache %1, 0x980(%0)	\n"	\
+	"	cache %1, 0xa00(%0); cache %1, 0xa80(%0)	\n"	\
+	"	cache %1, 0xb00(%0); cache %1, 0xb80(%0)	\n"	\
+	"	cache %1, 0xc00(%0); cache %1, 0xc80(%0)	\n"	\
+	"	cache %1, 0xd00(%0); cache %1, 0xd80(%0)	\n"	\
+	"	cache %1, 0xe00(%0); cache %1, 0xe80(%0)	\n"	\
+	"	cache %1, 0xf00(%0); cache %1, 0xf80(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
+static inline void blast_##pfx##cache##lsize(void)			\
+{									\
+	unsigned long start = INDEX_BASE;				\
+	unsigned long end = start + current_cpu_data.desc.waysize;	\
+	unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit;	\
+	unsigned long ws_end = current_cpu_data.desc.ways <<		\
+	                       current_cpu_data.desc.waybit;		\
+	unsigned long ws, addr;						\
+									\
+	__##pfx##flush_prologue						\
+									\
+	for (ws = 0; ws < ws_end; ws += ws_inc)				\
+		for (addr = start; addr < end; addr += lsize * 32)	\
+			cache##lsize##_unroll32(addr|ws, indexop);	\
+									\
+	__##pfx##flush_epilogue						\
+}									\
+									\
+static inline void blast_##pfx##cache##lsize##_page(unsigned long page)	\
+{									\
+	unsigned long start = page;					\
+	unsigned long end = page + PAGE_SIZE;				\
+									\
+	__##pfx##flush_prologue						\
+									\
+	do {								\
+		cache##lsize##_unroll32(start, hitop);			\
+		start += lsize * 32;					\
+	} while (start < end);						\
+									\
+	__##pfx##flush_epilogue						\
+}									\
+									\
+static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \
+{									\
+	unsigned long indexmask = current_cpu_data.desc.waysize - 1;	\
+	unsigned long start = INDEX_BASE + (page & indexmask);		\
+	unsigned long end = start + PAGE_SIZE;				\
+	unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit;	\
+	unsigned long ws_end = current_cpu_data.desc.ways <<		\
+	                       current_cpu_data.desc.waybit;		\
+	unsigned long ws, addr;						\
+									\
+	__##pfx##flush_prologue						\
+									\
+	for (ws = 0; ws < ws_end; ws += ws_inc)				\
+		for (addr = start; addr < end; addr += lsize * 32)	\
+			cache##lsize##_unroll32(addr|ws, indexop);	\
+									\
+	__##pfx##flush_epilogue						\
+}
+
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
+
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
+
+/* build blast_xxx_range, protected_blast_xxx_range */
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
+static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+						    unsigned long end)	\
+{									\
+	unsigned long lsize = cpu_##desc##_line_size();			\
+	unsigned long addr = start & ~(lsize - 1);			\
+	unsigned long aend = (end - 1) & ~(lsize - 1);			\
+									\
+	__##pfx##flush_prologue						\
+									\
+	while (1) {							\
+		prot##cache_op(hitop, addr);				\
+		if (addr == aend)					\
+			break;						\
+		addr += lsize;						\
+	}								\
+									\
+	__##pfx##flush_epilogue						\
+}
+
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
+/* blast_inv_dcache_range */
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
+
+#endif /* _ASM_R4KCACHE_H */
diff --git a/arch/mips/include/asm/reboot.h b/arch/mips/include/asm/reboot.h
new file mode 100644
index 0000000..e48c0bf
--- /dev/null
+++ b/arch/mips/include/asm/reboot.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_REBOOT_H
+#define _ASM_REBOOT_H
+
+extern void (*_machine_restart)(char *command);
+extern void (*_machine_halt)(void);
+
+#endif /* _ASM_REBOOT_H */
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
new file mode 100644
index 0000000..634b55d
--- /dev/null
+++ b/arch/mips/include/asm/reg.h
@@ -0,0 +1,128 @@
+/*
+ * Various register offset definitions for debuggers, core file
+ * examiners and whatnot.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 Ralf Baechle
+ * Copyright (C) 1995, 1999 Silicon Graphics
+ */
+#ifndef __ASM_MIPS_REG_H
+#define __ASM_MIPS_REG_H
+
+
+#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H)
+
+#define EF_R0			6
+#define EF_R1			7
+#define EF_R2			8
+#define EF_R3			9
+#define EF_R4			10
+#define EF_R5			11
+#define EF_R6			12
+#define EF_R7			13
+#define EF_R8			14
+#define EF_R9			15
+#define EF_R10			16
+#define EF_R11			17
+#define EF_R12			18
+#define EF_R13			19
+#define EF_R14			20
+#define EF_R15			21
+#define EF_R16			22
+#define EF_R17			23
+#define EF_R18			24
+#define EF_R19			25
+#define EF_R20			26
+#define EF_R21			27
+#define EF_R22			28
+#define EF_R23			29
+#define EF_R24			30
+#define EF_R25			31
+
+/*
+ * k0/k1 unsaved
+ */
+#define EF_R26			32
+#define EF_R27			33
+
+#define EF_R28			34
+#define EF_R29			35
+#define EF_R30			36
+#define EF_R31			37
+
+/*
+ * Saved special registers
+ */
+#define EF_LO			38
+#define EF_HI			39
+
+#define EF_CP0_EPC		40
+#define EF_CP0_BADVADDR		41
+#define EF_CP0_STATUS		42
+#define EF_CP0_CAUSE		43
+#define EF_UNUSED0		44
+
+#define EF_SIZE			180
+
+#endif
+
+#ifdef CONFIG_64BIT
+
+#define EF_R0			 0
+#define EF_R1			 1
+#define EF_R2			 2
+#define EF_R3			 3
+#define EF_R4			 4
+#define EF_R5			 5
+#define EF_R6			 6
+#define EF_R7			 7
+#define EF_R8			 8
+#define EF_R9			 9
+#define EF_R10			10
+#define EF_R11			11
+#define EF_R12			12
+#define EF_R13			13
+#define EF_R14			14
+#define EF_R15			15
+#define EF_R16			16
+#define EF_R17			17
+#define EF_R18			18
+#define EF_R19			19
+#define EF_R20			20
+#define EF_R21			21
+#define EF_R22			22
+#define EF_R23			23
+#define EF_R24			24
+#define EF_R25			25
+
+/*
+ * k0/k1 unsaved
+ */
+#define EF_R26			26
+#define EF_R27			27
+
+
+#define EF_R28			28
+#define EF_R29			29
+#define EF_R30			30
+#define EF_R31			31
+
+/*
+ * Saved special registers
+ */
+#define EF_LO			32
+#define EF_HI			33
+
+#define EF_CP0_EPC		34
+#define EF_CP0_BADVADDR		35
+#define EF_CP0_STATUS		36
+#define EF_CP0_CAUSE		37
+
+#define EF_SIZE			304	/* size in bytes */
+
+#endif /* CONFIG_64BIT */
+
+#endif /* __ASM_MIPS_REG_H */
diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h
new file mode 100644
index 0000000..7c8ecb6
--- /dev/null
+++ b/arch/mips/include/asm/regdef.h
@@ -0,0 +1,100 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1985 MIPS Computer Systems, Inc.
+ * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_REGDEF_H
+#define _ASM_REGDEF_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Symbolic register names for 32 bit ABI
+ */
+#define zero    $0      /* wired zero */
+#define AT      $1      /* assembler temp  - uppercase because of ".set at" */
+#define v0      $2      /* return value */
+#define v1      $3
+#define a0      $4      /* argument registers */
+#define a1      $5
+#define a2      $6
+#define a3      $7
+#define t0      $8      /* caller saved */
+#define t1      $9
+#define t2      $10
+#define t3      $11
+#define t4      $12
+#define t5      $13
+#define t6      $14
+#define t7      $15
+#define s0      $16     /* callee saved */
+#define s1      $17
+#define s2      $18
+#define s3      $19
+#define s4      $20
+#define s5      $21
+#define s6      $22
+#define s7      $23
+#define t8      $24     /* caller saved */
+#define t9      $25
+#define jp      $25     /* PIC jump register */
+#define k0      $26     /* kernel scratch */
+#define k1      $27
+#define gp      $28     /* global pointer */
+#define sp      $29     /* stack pointer */
+#define fp      $30     /* frame pointer */
+#define s8	$30	/* same like fp! */
+#define ra      $31     /* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define zero	$0	/* wired zero */
+#define AT	$at	/* assembler temp - uppercase because of ".set at" */
+#define v0	$2	/* return value - caller saved */
+#define v1	$3
+#define a0	$4	/* argument registers */
+#define a1	$5
+#define a2	$6
+#define a3	$7
+#define a4	$8	/* arg reg 64 bit; caller saved in 32 bit */
+#define ta0	$8
+#define a5	$9
+#define ta1	$9
+#define a6	$10
+#define ta2	$10
+#define a7	$11
+#define ta3	$11
+#define t0	$12	/* caller saved */
+#define t1	$13
+#define t2	$14
+#define t3	$15
+#define s0	$16	/* callee saved */
+#define s1	$17
+#define s2	$18
+#define s3	$19
+#define s4	$20
+#define s5	$21
+#define s6	$22
+#define s7	$23
+#define t8	$24	/* caller saved */
+#define t9	$25	/* callee address for PIC/temp */
+#define jp	$25	/* PIC jump register */
+#define k0	$26	/* kernel temporary */
+#define k1	$27
+#define gp	$28	/* global pointer - caller saved for PIC */
+#define sp	$29	/* stack pointer */
+#define fp	$30	/* frame pointer */
+#define s8	$30	/* callee saved */
+#define ra	$31	/* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_REGDEF_H */
diff --git a/arch/mips/include/asm/resource.h b/arch/mips/include/asm/resource.h
new file mode 100644
index 0000000..87cb308
--- /dev/null
+++ b/arch/mips/include/asm/resource.h
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_RESOURCE_H
+#define _ASM_RESOURCE_H
+
+
+/*
+ * These five resource limit IDs have a MIPS/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE		5	/* max number of open files */
+#define RLIMIT_AS		6	/* address space limit */
+#define RLIMIT_RSS		7	/* max resident set size */
+#define RLIMIT_NPROC		8	/* max number of processes */
+#define RLIMIT_MEMLOCK		9	/* max locked-in-memory address space */
+
+/*
+ * SuS says limits have to be unsigned.
+ * Which makes a ton more sense anyway,
+ * but we keep the old value on MIPS32,
+ * for compatibility:
+ */
+#ifdef CONFIG_32BIT
+# define RLIM_INFINITY		0x7fffffffUL
+#endif
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_RESOURCE_H */
diff --git a/arch/mips/include/asm/rm9k-ocd.h b/arch/mips/include/asm/rm9k-ocd.h
new file mode 100644
index 0000000..b0b80d9
--- /dev/null
+++ b/arch/mips/include/asm/rm9k-ocd.h
@@ -0,0 +1,56 @@
+/*
+ *  Copyright (C) 2004 by Basler Vision Technologies AG
+ *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_ASM_RM9K_OCD_H)
+#define _ASM_RM9K_OCD_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+extern volatile void __iomem * const ocd_base;
+extern volatile void __iomem * const titan_base;
+
+#define ocd_addr(__x__)		(ocd_base + (__x__))
+#define titan_addr(__x__)	(titan_base + (__x__))
+#define scram_addr(__x__)	(scram_base + (__x__))
+
+/* OCD register access */
+#define ocd_readl(__offs__) __raw_readl(ocd_addr(__offs__))
+#define ocd_readw(__offs__) __raw_readw(ocd_addr(__offs__))
+#define ocd_readb(__offs__) __raw_readb(ocd_addr(__offs__))
+#define ocd_writel(__val__, __offs__) \
+	__raw_writel((__val__), ocd_addr(__offs__))
+#define ocd_writew(__val__, __offs__) \
+	__raw_writew((__val__), ocd_addr(__offs__))
+#define ocd_writeb(__val__, __offs__) \
+	__raw_writeb((__val__), ocd_addr(__offs__))
+
+/* TITAN register access - 32 bit-wide only */
+#define titan_readl(__offs__) __raw_readl(titan_addr(__offs__))
+#define titan_writel(__val__, __offs__) \
+	__raw_writel((__val__), titan_addr(__offs__))
+
+/* Protect access to shared TITAN registers */
+extern spinlock_t titan_lock;
+extern int titan_irqflags;
+#define lock_titan_regs() spin_lock_irqsave(&titan_lock, titan_irqflags)
+#define unlock_titan_regs() spin_unlock_irqrestore(&titan_lock, titan_irqflags)
+
+#endif	/* !defined(_ASM_RM9K_OCD_H) */
diff --git a/arch/mips/include/asm/rtlx.h b/arch/mips/include/asm/rtlx.h
new file mode 100644
index 0000000..4ca3063
--- /dev/null
+++ b/arch/mips/include/asm/rtlx.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ */
+
+#ifndef __ASM_RTLX_H_
+#define __ASM_RTLX_H_
+
+#include <irq.h>
+
+#define LX_NODE_BASE 10
+
+#define MIPS_CPU_RTLX_IRQ 0
+
+#define RTLX_VERSION 2
+#define RTLX_xID 0x12345600
+#define RTLX_ID (RTLX_xID | RTLX_VERSION)
+#define RTLX_CHANNELS 8
+
+#define RTLX_CHANNEL_STDIO	0
+#define RTLX_CHANNEL_DBG	1
+#define RTLX_CHANNEL_SYSIO	2
+
+extern int rtlx_open(int index, int can_sleep);
+extern int rtlx_release(int index);
+extern ssize_t rtlx_read(int index, void __user *buff, size_t count);
+extern ssize_t rtlx_write(int index, const void __user *buffer, size_t count);
+extern unsigned int rtlx_read_poll(int index, int can_sleep);
+extern unsigned int rtlx_write_poll(int index);
+
+enum rtlx_state {
+	RTLX_STATE_UNUSED = 0,
+	RTLX_STATE_INITIALISED,
+	RTLX_STATE_REMOTE_READY,
+	RTLX_STATE_OPENED
+};
+
+#define RTLX_BUFFER_SIZE 2048
+
+/* each channel supports read and write.
+   linux (vpe0) reads lx_buffer  and writes rt_buffer
+   SP (vpe1) reads rt_buffer and writes lx_buffer
+*/
+struct rtlx_channel {
+	enum rtlx_state rt_state;
+	enum rtlx_state lx_state;
+
+	int buffer_size;
+
+	/* read and write indexes per buffer */
+	int rt_write, rt_read;
+	char *rt_buffer;
+
+	int lx_write, lx_read;
+	char *lx_buffer;
+};
+
+struct rtlx_info {
+	unsigned long id;
+	enum rtlx_state state;
+
+	struct rtlx_channel channel[RTLX_CHANNELS];
+};
+
+#endif /* __ASM_RTLX_H_ */
diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h
new file mode 100644
index 0000000..83d69fe
--- /dev/null
+++ b/arch/mips/include/asm/scatterlist.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_SCATTERLIST_H
+#define __ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0x00ffffffUL)
+
+#endif /* __ASM_SCATTERLIST_H */
diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h
new file mode 100644
index 0000000..36ed440
--- /dev/null
+++ b/arch/mips/include/asm/seccomp.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_SECCOMP_H
+
+#include <linux/thread_info.h>
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+/*
+ * Kludge alert:
+ *
+ * The generic seccomp code currently allows only a single compat ABI.  Until
+ * this is fixed we priorize O32 as the compat ABI over N32.
+ */
+#ifdef CONFIG_MIPS32_O32
+
+#define TIF_32BIT TIF_32BIT_REGS
+
+#define __NR_seccomp_read_32		4003
+#define __NR_seccomp_write_32		4004
+#define __NR_seccomp_exit_32		4001
+#define __NR_seccomp_sigreturn_32	4193	/* rt_sigreturn */
+
+#elif defined(CONFIG_MIPS32_N32)
+
+#define TIF_32BIT _TIF_32BIT_ADDR
+
+#define __NR_seccomp_read_32		6000
+#define __NR_seccomp_write_32		6001
+#define __NR_seccomp_exit_32		6058
+#define __NR_seccomp_sigreturn_32	6211	/* rt_sigreturn */
+
+#endif /* CONFIG_MIPS32_O32 */
+
+#endif /* __ASM_SECCOMP_H */
diff --git a/arch/mips/include/asm/sections.h b/arch/mips/include/asm/sections.h
new file mode 100644
index 0000000..b7e3726
--- /dev/null
+++ b/arch/mips/include/asm/sections.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SECTIONS_H
+#define _ASM_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* _ASM_SECTIONS_H */
diff --git a/arch/mips/include/asm/segment.h b/arch/mips/include/asm/segment.h
new file mode 100644
index 0000000..92ac001
--- /dev/null
+++ b/arch/mips/include/asm/segment.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* _ASM_SEGMENT_H */
diff --git a/arch/mips/include/asm/sembuf.h b/arch/mips/include/asm/sembuf.h
new file mode 100644
index 0000000..7281a4d
--- /dev/null
+++ b/arch/mips/include/asm/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_SEMBUF_H */
diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h
new file mode 100644
index 0000000..c07ebd8
--- /dev/null
+++ b/arch/mips/include/asm/serial.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_SERIAL_H */
diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h
new file mode 100644
index 0000000..e600ced
--- /dev/null
+++ b/arch/mips/include/asm/setup.h
@@ -0,0 +1,10 @@
+#ifndef _MIPS_SETUP_H
+#define _MIPS_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#ifdef  __KERNEL__
+extern void setup_early_printk(void);
+#endif /* __KERNEL__ */
+
+#endif /* __SETUP_H */
diff --git a/arch/mips/include/asm/sgi/gio.h b/arch/mips/include/asm/sgi/gio.h
new file mode 100644
index 0000000..889cf02
--- /dev/null
+++ b/arch/mips/include/asm/sgi/gio.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * gio.h: Definitions for SGI GIO bus
+ *
+ * Copyright (C) 2002 Ladislav Michl
+ */
+
+#ifndef _SGI_GIO_H
+#define _SGI_GIO_H
+
+/*
+ * GIO bus addresses
+ *
+ * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have
+ * three physical connectors, but only two slots, GFX and EXP0.
+ *
+ * There is 10MB of GIO address space for GIO64 slot devices
+ * slot#   slot type address range            size
+ * -----   --------- ----------------------- -----
+ *   0     GFX       0x1f000000 - 0x1f3fffff   4MB
+ *   1     EXP0      0x1f400000 - 0x1f5fffff   2MB
+ *   2     EXP1      0x1f600000 - 0x1f9fffff   4MB
+ *
+ * There are un-slotted devices, HPC, I/O and misc devices, which are grouped
+ * into the HPC address space.
+ *   -     MISC      0x1fb00000 - 0x1fbfffff   1MB
+ *
+ * Following space is reserved and unused
+ *   -     RESERVED  0x18000000 - 0x1effffff 112MB
+ *
+ * GIO bus IDs
+ *
+ * Each GIO bus device identifies itself to the system by answering a
+ * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less
+ * than 128 are 8 bits long, with the most significant 24 bits read from
+ * the slot undefined.
+ *
+ * 32-bit IDs are divided into
+ *	bits 0:6        the product ID; ranges from 0x00 to 0x7F.
+ *	bit 7		0=GIO Product ID is 8 bits wide
+ *			1=GIO Product ID is 32 bits wide.
+ *	bits 8:15       manufacturer version for the product.
+ *	bit 16		0=GIO32 and GIO32-bis, 1=GIO64.
+ *	bit 17		0=no ROM present
+ *			1=ROM present on this board AND next three words
+ *			space define the ROM.
+ *	bits 18:31	up to manufacturer.
+ *
+ * IDs above 0x50/0xd0 are of 3rd party boards.
+ *
+ * 8-bit IDs
+ *	0x01		XPI low cost FDDI
+ *	0x02		GTR TokenRing
+ *	0x04		Synchronous ISDN
+ *	0x05		ATM board [*]
+ *	0x06		Canon Interface
+ *	0x07		16 bit SCSI Card [*]
+ *	0x08		JPEG (Double Wide)
+ *	0x09		JPEG (Single Wide)
+ *	0x0a		XPI mez. FDDI device 0
+ *	0x0b		XPI mez. FDDI device 1
+ *	0x0c		SMPTE 259M Video [*]
+ *	0x0d		Babblefish Compression [*]
+ *	0x0e		E-Plex 8-port Ethernet
+ *	0x30		Lyon Lamb IVAS
+ *	0xb8		GIO 100BaseTX Fast Ethernet (gfe)
+ *
+ * [*] Device provide 32-bit ID.
+ *
+ */
+
+#define GIO_ID(x)		(x & 0x7f)
+#define GIO_32BIT_ID		0x80
+#define GIO_REV(x)		((x >> 8) & 0xff)
+#define GIO_64BIT_IFACE		0x10000
+#define GIO_ROM_PRESENT		0x20000
+#define GIO_VENDOR_CODE(x)	((x >> 18) & 0x3fff)
+
+#define GIO_SLOT_GFX_BASE	0x1f000000
+#define GIO_SLOT_EXP0_BASE	0x1f400000
+#define GIO_SLOT_EXP1_BASE	0x1f600000
+
+#endif /* _SGI_GIO_H */
diff --git a/arch/mips/include/asm/sgi/hpc3.h b/arch/mips/include/asm/sgi/hpc3.h
new file mode 100644
index 0000000..c4729f5
--- /dev/null
+++ b/arch/mips/include/asm/sgi/hpc3.h
@@ -0,0 +1,317 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * hpc3.h: Definitions for SGI HPC3 controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1998 Ralf Baechle
+ */
+
+#ifndef _SGI_HPC3_H
+#define _SGI_HPC3_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+/* An HPC DMA descriptor. */
+struct hpc_dma_desc {
+	u32 pbuf;	/* physical address of data buffer */
+	u32 cntinfo;	/* counter and info bits */
+#define HPCDMA_EOX	0x80000000 /* last desc in chain for tx */
+#define HPCDMA_EOR	0x80000000 /* last desc in chain for rx */
+#define HPCDMA_EOXP	0x40000000 /* end of packet for tx */
+#define HPCDMA_EORP	0x40000000 /* end of packet for rx */
+#define HPCDMA_XIE	0x20000000 /* irq generated when at end of this desc */
+#define HPCDMA_XIU	0x01000000 /* Tx buffer in use by CPU. */
+#define HPCDMA_EIPC	0x00ff0000 /* SEEQ ethernet special xternal bytecount */
+#define HPCDMA_ETXD	0x00008000 /* set to one by HPC when packet tx'd */
+#define HPCDMA_OWN	0x00004000 /* Denotes ring buffer ownership on rx */
+#define HPCDMA_BCNT	0x00003fff /* size in bytes of this dma buffer */
+
+	u32 pnext;	/* paddr of next hpc_dma_desc if any */
+};
+
+/* The set of regs for each HPC3 PBUS DMA channel. */
+struct hpc3_pbus_dmacregs {
+	volatile u32 pbdma_bptr;	/* pbus dma channel buffer ptr */
+	volatile u32 pbdma_dptr;	/* pbus dma channel desc ptr */
+	u32 _unused0[0x1000/4 - 2];	/* padding */
+	volatile u32 pbdma_ctrl;	/* pbus dma channel control register has
+					 * copletely different meaning for read
+					 * compared with write */
+	/* read */
+#define HPC3_PDMACTRL_INT	0x00000001 /* interrupt (cleared after read) */
+#define HPC3_PDMACTRL_ISACT	0x00000002 /* channel active */
+	/* write */
+#define HPC3_PDMACTRL_SEL	0x00000002 /* little endian transfer */
+#define HPC3_PDMACTRL_RCV	0x00000004 /* direction is receive */
+#define HPC3_PDMACTRL_FLSH	0x00000008 /* enable flush for receive DMA */
+#define HPC3_PDMACTRL_ACT	0x00000010 /* start dma transfer */
+#define HPC3_PDMACTRL_LD	0x00000020 /* load enable for ACT */
+#define HPC3_PDMACTRL_RT	0x00000040 /* Use realtime GIO bus servicing */
+#define HPC3_PDMACTRL_HW	0x0000ff00 /* DMA High-water mark */
+#define HPC3_PDMACTRL_FB	0x003f0000 /* Ptr to beginning of fifo */
+#define HPC3_PDMACTRL_FE	0x3f000000 /* Ptr to end of fifo */
+
+	u32 _unused1[0x1000/4 - 1];	/* padding */
+};
+
+/* The HPC3 SCSI registers, this does not include external ones. */
+struct hpc3_scsiregs {
+	volatile u32 cbptr;	/* current dma buffer ptr, diagnostic use only */
+	volatile u32 ndptr;	/* next dma descriptor ptr */
+	u32 _unused0[0x1000/4 - 2];	/* padding */
+	volatile u32 bcd;	/* byte count info */
+#define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */
+#define HPC3_SBCD_XIE     0x00004000 /* Send IRQ when done with cur buf */
+#define HPC3_SBCD_EOX     0x00008000 /* Indicates this is last buf in chain */
+
+	volatile u32 ctrl;    /* control register */
+#define HPC3_SCTRL_IRQ    0x01 /* IRQ asserted, either dma done or parity */
+#define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */
+#define HPC3_SCTRL_DIR    0x04 /* DMA direction, 1=dev2mem 0=mem2dev */
+#define HPC3_SCTRL_FLUSH  0x08 /* Tells HPC3 to flush scsi fifos */
+#define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */
+#define HPC3_SCTRL_AMASK  0x20 /* DMA active inhibits PIO */
+#define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */
+#define HPC3_SCTRL_PERR   0x80 /* Bad parity on HPC3 iface to scsi controller */
+
+	volatile u32 gfptr;	/* current GIO fifo ptr */
+	volatile u32 dfptr;	/* current device fifo ptr */
+	volatile u32 dconfig;	/* DMA configuration register */
+#define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */
+#define HPC3_SDCFG_D1   0x00006 /* Cycles to spend in D1 state */
+#define HPC3_SDCFG_D2   0x00038 /* Cycles to spend in D2 state */
+#define HPC3_SDCFG_D3   0x001c0 /* Cycles to spend in D3 state */
+#define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */
+#define HPC3_SDCFG_HW   0x01000 /* Enable 16-bit halfword DMA accesses to scsi */
+#define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */
+#define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */
+#define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */
+#define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */
+
+	volatile u32 pconfig;	/* PIO configuration register */
+#define HPC3_SPCFG_P3   0x0003 /* Cycles to spend in P3 state */
+#define HPC3_SPCFG_P2W  0x001c /* Cycles to spend in P2 state for writes */
+#define HPC3_SPCFG_P2R  0x01e0 /* Cycles to spend in P2 state for reads */
+#define HPC3_SPCFG_P1   0x0e00 /* Cycles to spend in P1 state */
+#define HPC3_SPCFG_HW   0x1000 /* Enable 16-bit halfword PIO accesses to scsi */
+#define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */
+#define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */
+#define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */
+
+	u32 _unused1[0x1000/4 - 6];	/* padding */
+};
+
+/* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */
+struct hpc3_ethregs {
+	/* Receiver registers. */
+	volatile u32 rx_cbptr;   /* current dma buffer ptr, diagnostic use only */
+	volatile u32 rx_ndptr;   /* next dma descriptor ptr */
+	u32 _unused0[0x1000/4 - 2];	/* padding */
+	volatile u32 rx_bcd;	/* byte count info */
+#define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */
+#define HPC3_ERXBCD_XIE     0x20000000 /* HPC3 interrupts cpu at end of this buf */
+#define HPC3_ERXBCD_EOX     0x80000000 /* flags this as end of descriptor chain */
+
+	volatile u32 rx_ctrl;	/* control register */
+#define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */
+#define HPC3_ERXCTRL_STAT6  0x00000040 /* Rdonly irq status */
+#define HPC3_ERXCTRL_STAT7  0x00000080 /* Rdonlt old/new status bit from Seeq */
+#define HPC3_ERXCTRL_ENDIAN 0x00000100 /* Endian for dma channel, little=1 big=0 */
+#define HPC3_ERXCTRL_ACTIVE 0x00000200 /* Tells if DMA transfer is in progress */
+#define HPC3_ERXCTRL_AMASK  0x00000400 /* Tells if ACTIVE inhibits PIO's to hpc3 */
+#define HPC3_ERXCTRL_RBO    0x00000800 /* Receive buffer overflow if set to 1 */
+
+	volatile u32 rx_gfptr;	/* current GIO fifo ptr */
+	volatile u32 rx_dfptr;	/* current device fifo ptr */
+	u32 _unused1;		/* padding */
+	volatile u32 reset;	/* reset register */
+#define HPC3_ERST_CRESET 0x1	/* Reset dma channel and external controller */
+#define HPC3_ERST_CLRIRQ 0x2	/* Clear channel interrupt */
+#define HPC3_ERST_LBACK  0x4	/* Enable diagnostic loopback mode of Seeq8003 */
+
+	volatile u32 dconfig;    /* DMA configuration register */
+#define HPC3_EDCFG_D1    0x0000f /* Cycles to spend in D1 state for PIO */
+#define HPC3_EDCFG_D2    0x000f0 /* Cycles to spend in D2 state for PIO */
+#define HPC3_EDCFG_D3    0x00f00 /* Cycles to spend in D3 state for PIO */
+#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
+#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
+#define HPC3_EDCFG_FEOP  0x04000 /* Bad packet marker timeout enable */
+#define HPC3_EDCFG_FIRQ  0x08000 /* Another bad packet timeout enable */
+#define HPC3_EDCFG_PTO   0x30000 /* Programmed timeout value for above two */
+
+	volatile u32 pconfig;   /* PIO configuration register */
+#define HPC3_EPCFG_P1    0x000f /* Cycles to spend in P1 state for PIO */
+#define HPC3_EPCFG_P2    0x00f0 /* Cycles to spend in P2 state for PIO */
+#define HPC3_EPCFG_P3    0x0f00 /* Cycles to spend in P3 state for PIO */
+#define HPC3_EPCFG_TST   0x1000 /* Diagnistic ram test feature bit */
+
+	u32 _unused2[0x1000/4 - 8];	/* padding */
+
+	/* Transmitter registers. */
+	volatile u32 tx_cbptr;	/* current dma buffer ptr, diagnostic use only */
+	volatile u32 tx_ndptr;	/* next dma descriptor ptr */
+	u32 _unused3[0x1000/4 - 2];	/* padding */
+	volatile u32 tx_bcd;		/* byte count info */
+#define HPC3_ETXBCD_BCNTMSK 0x00003fff	/* bytes to be read from memory */
+#define HPC3_ETXBCD_ESAMP   0x10000000	/* if set, too late to add descriptor */
+#define HPC3_ETXBCD_XIE     0x20000000	/* Interrupt cpu at end of cur desc */
+#define HPC3_ETXBCD_EOP     0x40000000	/* Last byte of cur buf is end of packet */
+#define HPC3_ETXBCD_EOX     0x80000000	/* This buf is the end of desc chain */
+
+	volatile u32 tx_ctrl;		/* control register */
+#define HPC3_ETXCTRL_STAT30 0x0000000f	/* Rdonly copy of seeq tx stat reg */
+#define HPC3_ETXCTRL_STAT4  0x00000010	/* Indicate late collision occurred */
+#define HPC3_ETXCTRL_STAT75 0x000000e0	/* Rdonly irq status from seeq */
+#define HPC3_ETXCTRL_ENDIAN 0x00000100	/* DMA channel endian mode, 1=little 0=big */
+#define HPC3_ETXCTRL_ACTIVE 0x00000200	/* DMA tx channel is active */
+#define HPC3_ETXCTRL_AMASK  0x00000400	/* Indicates ACTIVE inhibits PIO's */
+
+	volatile u32 tx_gfptr;		/* current GIO fifo ptr */
+	volatile u32 tx_dfptr;		/* current device fifo ptr */
+	u32 _unused4[0x1000/4 - 4];	/* padding */
+};
+
+struct hpc3_regs {
+	/* First regs for the PBUS 8 dma channels. */
+	struct hpc3_pbus_dmacregs pbdma[8];
+
+	/* Now the HPC scsi registers, we get two scsi reg sets. */
+	struct hpc3_scsiregs scsi_chan0, scsi_chan1;
+
+	/* The SEEQ hpc3 ethernet dma/control registers. */
+	struct hpc3_ethregs ethregs;
+
+	/* Here are where the hpc3 fifo's can be directly accessed
+	 * via PIO accesses.  Under normal operation we never stick
+	 * our grubby paws in here so it's just padding. */
+	u32 _unused0[0x18000/4];
+
+	/* HPC3 irq status regs.  Due to a peculiar bug you need to
+	 * look at two different register addresses to get at all of
+	 * the status bits.  The first reg can only reliably report
+	 * bits 4:0 of the status, and the second reg can only
+	 * reliably report bits 9:5 of the hpc3 irq status.  I told
+	 * you it was a peculiar bug. ;-)
+	 */
+	volatile u32 istat0;		/* Irq status, only bits <4:0> reliable. */
+#define HPC3_ISTAT_PBIMASK	0x0ff	/* irq bits for pbus devs 0 --> 7 */
+#define HPC3_ISTAT_SC0MASK	0x100	/* irq bit for scsi channel 0 */
+#define HPC3_ISTAT_SC1MASK	0x200	/* irq bit for scsi channel 1 */
+
+	volatile u32 gio_misc;		/* GIO misc control bits. */
+#define HPC3_GIOMISC_ERTIME	0x1	/* Enable external timer real time. */
+#define HPC3_GIOMISC_DENDIAN	0x2	/* dma descriptor endian, 1=lit 0=big */
+
+	u32 eeprom;			/* EEPROM data reg. */
+#define HPC3_EEPROM_EPROT	0x01	/* Protect register enable */
+#define HPC3_EEPROM_CSEL	0x02	/* Chip select */
+#define HPC3_EEPROM_ECLK	0x04	/* EEPROM clock */
+#define HPC3_EEPROM_DATO	0x08	/* Data out */
+#define HPC3_EEPROM_DATI	0x10	/* Data in */
+
+	volatile u32 istat1;		/* Irq status, only bits <9:5> reliable. */
+	volatile u32 bestat;		/* Bus error interrupt status reg. */
+#define HPC3_BESTAT_BLMASK	0x000ff	/* Bus lane where bad parity occurred */
+#define HPC3_BESTAT_CTYPE	0x00100	/* Bus cycle type, 0=PIO 1=DMA */
+#define HPC3_BESTAT_PIDSHIFT	9
+#define HPC3_BESTAT_PIDMASK	0x3f700	/* DMA channel parity identifier */
+
+	u32 _unused1[0x14000/4 - 5];	/* padding */
+
+	/* Now direct PIO per-HPC3 peripheral access to external regs. */
+	volatile u32 scsi0_ext[256];	/* SCSI channel 0 external regs */
+	u32 _unused2[0x7c00/4];
+	volatile u32 scsi1_ext[256];	/* SCSI channel 1 external regs */
+	u32 _unused3[0x7c00/4];
+	volatile u32 eth_ext[320];	/* Ethernet external registers */
+	u32 _unused4[0x3b00/4];
+
+	/* Per-peripheral device external registers and DMA/PIO control. */
+	volatile u32 pbus_extregs[16][256];
+	volatile u32 pbus_dmacfg[8][128];
+	/* Cycles to spend in D3 for reads */
+#define HPC3_DMACFG_D3R_MASK		0x00000001
+#define HPC3_DMACFG_D3R_SHIFT		0
+	/* Cycles to spend in D4 for reads */
+#define HPC3_DMACFG_D4R_MASK		0x0000001e
+#define HPC3_DMACFG_D4R_SHIFT		1
+	/* Cycles to spend in D5 for reads */
+#define HPC3_DMACFG_D5R_MASK		0x000001e0
+#define HPC3_DMACFG_D5R_SHIFT		5
+	/* Cycles to spend in D3 for writes */
+#define HPC3_DMACFG_D3W_MASK		0x00000200
+#define HPC3_DMACFG_D3W_SHIFT		9
+	/* Cycles to spend in D4 for writes */
+#define HPC3_DMACFG_D4W_MASK		0x00003c00
+#define HPC3_DMACFG_D4W_SHIFT		10
+	/* Cycles to spend in D5 for writes */
+#define HPC3_DMACFG_D5W_MASK		0x0003c000
+#define HPC3_DMACFG_D5W_SHIFT		14
+	/* Enable 16-bit DMA access mode */
+#define HPC3_DMACFG_DS16		0x00040000
+	/* Places halfwords on high 16 bits of bus */
+#define HPC3_DMACFG_EVENHI		0x00080000
+	/* Make this device real time */
+#define HPC3_DMACFG_RTIME		0x00200000
+	/* 5 bit burst count for DMA device */
+#define HPC3_DMACFG_BURST_MASK		0x07c00000
+#define HPC3_DMACFG_BURST_SHIFT	22
+	/* Use live pbus_dreq unsynchronized signal */
+#define HPC3_DMACFG_DRQLIVE		0x08000000
+	volatile u32 pbus_piocfg[16][64];
+	/* Cycles to spend in P2 state for reads */
+#define HPC3_PIOCFG_P2R_MASK		0x00001
+#define HPC3_PIOCFG_P2R_SHIFT		0
+	/* Cycles to spend in P3 state for reads */
+#define HPC3_PIOCFG_P3R_MASK		0x0001e
+#define HPC3_PIOCFG_P3R_SHIFT		1
+	/* Cycles to spend in P4 state for reads */
+#define HPC3_PIOCFG_P4R_MASK		0x001e0
+#define HPC3_PIOCFG_P4R_SHIFT		5
+	/* Cycles to spend in P2 state for writes */
+#define HPC3_PIOCFG_P2W_MASK		0x00200
+#define HPC3_PIOCFG_P2W_SHIFT		9
+	/* Cycles to spend in P3 state for writes */
+#define HPC3_PIOCFG_P3W_MASK		0x03c00
+#define HPC3_PIOCFG_P3W_SHIFT		10
+	/* Cycles to spend in P4 state for writes */
+#define HPC3_PIOCFG_P4W_MASK		0x3c000
+#define HPC3_PIOCFG_P4W_SHIFT		14
+	/* Enable 16-bit PIO accesses */
+#define HPC3_PIOCFG_DS16		0x40000
+	/* Place even address bits in bits <15:8> */
+#define HPC3_PIOCFG_EVENHI		0x80000
+
+	/* PBUS PROM control regs. */
+	volatile u32 pbus_promwe;	/* PROM write enable register */
+#define HPC3_PROM_WENAB	0x1	/* Enable writes to the PROM */
+
+	u32 _unused5[0x0800/4 - 1];
+	volatile u32 pbus_promswap;	/* Chip select swap reg */
+#define HPC3_PROM_SWAP	0x1	/* invert GIO addr bit to select prom0 or prom1 */
+
+	u32 _unused6[0x0800/4 - 1];
+	volatile u32 pbus_gout;	/* PROM general purpose output reg */
+#define HPC3_PROM_STAT	0x1	/* General purpose status bit in gout */
+
+	u32 _unused7[0x1000/4 - 1];
+	volatile u32 rtcregs[14];	/* Dallas clock registers */
+	u32 _unused8[50];
+	volatile u32 bbram[8192-50-14];	/* Battery backed ram */
+};
+
+/*
+ * It is possible to have two HPC3's within the address space on
+ * one machine, though only having one is more likely on an Indy.
+ */
+extern struct hpc3_regs *hpc3c0, *hpc3c1;
+#define HPC3_CHIP0_BASE		0x1fb80000	/* physical */
+#define HPC3_CHIP1_BASE		0x1fb00000	/* physical */
+
+extern void sgihpc_init(void);
+
+#endif /* _SGI_HPC3_H */
diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h
new file mode 100644
index 0000000..343ed15
--- /dev/null
+++ b/arch/mips/include/asm/sgi/ioc.h
@@ -0,0 +1,200 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ioc.h: Definitions for SGI I/O Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2001, 2003 Ladislav Michl
+ */
+
+#ifndef _SGI_IOC_H
+#define _SGI_IOC_H
+
+#include <linux/types.h>
+#include <asm/sgi/pi1.h>
+
+/*
+ * All registers are 8-bit wide alligned on 32-bit boundary. Bad things
+ * happen if you try word access them. You have been warned.
+ */
+
+struct sgioc_uart_regs {
+	u8 _ctrl1[3];
+	volatile u8 ctrl1;
+	u8 _data1[3];
+	volatile u8 data1;
+	u8 _ctrl2[3];
+	volatile u8 ctrl2;
+	u8 _data2[3];
+	volatile u8 data2;
+};
+
+struct sgioc_keyb_regs {
+	u8 _data[3];
+	volatile u8 data;
+	u8 _command[3];
+	volatile u8 command;
+};
+
+struct sgint_regs {
+	u8 _istat0[3];
+	volatile u8 istat0;		/* Interrupt status zero */
+#define SGINT_ISTAT0_FFULL	0x01
+#define SGINT_ISTAT0_SCSI0	0x02
+#define SGINT_ISTAT0_SCSI1	0x04
+#define SGINT_ISTAT0_ENET	0x08
+#define SGINT_ISTAT0_GFXDMA	0x10
+#define SGINT_ISTAT0_PPORT	0x20
+#define SGINT_ISTAT0_HPC2	0x40
+#define SGINT_ISTAT0_LIO2	0x80
+	u8 _imask0[3];
+	volatile u8 imask0;		/* Interrupt mask zero */
+	u8 _istat1[3];
+	volatile u8 istat1;		/* Interrupt status one */
+#define SGINT_ISTAT1_ISDNI	0x01
+#define SGINT_ISTAT1_PWR	0x02
+#define SGINT_ISTAT1_ISDNH	0x04
+#define SGINT_ISTAT1_LIO3	0x08
+#define SGINT_ISTAT1_HPC3	0x10
+#define SGINT_ISTAT1_AFAIL	0x20
+#define SGINT_ISTAT1_VIDEO	0x40
+#define SGINT_ISTAT1_GIO2	0x80
+	u8 _imask1[3];
+	volatile u8 imask1;		/* Interrupt mask one */
+	u8 _vmeistat[3];
+	volatile u8 vmeistat;		/* VME interrupt status */
+	u8 _cmeimask0[3];
+	volatile u8 cmeimask0;		/* VME interrupt mask zero */
+	u8 _cmeimask1[3];
+	volatile u8 cmeimask1;		/* VME interrupt mask one */
+	u8 _cmepol[3];
+	volatile u8 cmepol;		/* VME polarity */
+	u8 _tclear[3];
+	volatile u8 tclear;
+	u8 _errstat[3];
+	volatile u8 errstat;	/* Error status reg, reserved on INT2 */
+	u32 _unused0[2];
+	u8 _tcnt0[3];
+	volatile u8 tcnt0;		/* counter 0 */
+	u8 _tcnt1[3];
+	volatile u8 tcnt1;		/* counter 1 */
+	u8 _tcnt2[3];
+	volatile u8 tcnt2;		/* counter 2 */
+	u8 _tcword[3];
+	volatile u8 tcword;		/* control word */
+#define SGINT_TCWORD_BCD	0x01	/* Use BCD mode for counters */
+#define SGINT_TCWORD_MMASK	0x0e	/* Mode bitmask. */
+#define SGINT_TCWORD_MITC	0x00	/* IRQ on terminal count (doesn't work) */
+#define SGINT_TCWORD_MOS	0x02	/* One-shot IRQ mode. */
+#define SGINT_TCWORD_MRGEN	0x04	/* Normal rate generation */
+#define SGINT_TCWORD_MSWGEN	0x06	/* Square wave generator mode */
+#define SGINT_TCWORD_MSWST	0x08	/* Software strobe */
+#define SGINT_TCWORD_MHWST	0x0a	/* Hardware strobe */
+#define SGINT_TCWORD_CMASK	0x30	/* Command mask */
+#define SGINT_TCWORD_CLAT	0x00	/* Latch command */
+#define SGINT_TCWORD_CLSB	0x10	/* LSB read/write */
+#define SGINT_TCWORD_CMSB	0x20	/* MSB read/write */
+#define SGINT_TCWORD_CALL	0x30	/* Full counter read/write */
+#define SGINT_TCWORD_CNT0	0x00	/* Select counter zero */
+#define SGINT_TCWORD_CNT1	0x40	/* Select counter one */
+#define SGINT_TCWORD_CNT2	0x80	/* Select counter two */
+#define SGINT_TCWORD_CRBCK	0xc0	/* Readback command */
+};
+
+/*
+ * The timer is the good old 8254.  Unlike in PCs it's clocked at exactly 1MHz
+ */
+#define SGINT_TIMER_CLOCK	1000000
+
+/*
+ * This is the constant we're using for calibrating the counter.
+ */
+#define SGINT_TCSAMP_COUNTER	((SGINT_TIMER_CLOCK / HZ) + 255)
+
+/* We need software copies of these because they are write only. */
+extern u8 sgi_ioc_reset, sgi_ioc_write;
+
+struct sgioc_regs {
+	struct pi1_regs pport;
+	u32 _unused0[2];
+	struct sgioc_uart_regs uart;
+	struct sgioc_keyb_regs kbdmouse;
+	u8 _gcsel[3];
+	volatile u8 gcsel;
+	u8 _genctrl[3];
+	volatile u8 genctrl;
+	u8 _panel[3];
+	volatile u8 panel;
+#define SGIOC_PANEL_POWERON	0x01
+#define SGIOC_PANEL_POWERINTR	0x02
+#define SGIOC_PANEL_VOLDNINTR	0x10
+#define SGIOC_PANEL_VOLDNHOLD	0x20
+#define SGIOC_PANEL_VOLUPINTR	0x40
+#define SGIOC_PANEL_VOLUPHOLD	0x80
+	u32 _unused1;
+	u8 _sysid[3];
+	volatile u8 sysid;
+#define SGIOC_SYSID_FULLHOUSE	0x01
+#define SGIOC_SYSID_BOARDREV(x)	(((x) & 0x1e) >> 1)
+#define SGIOC_SYSID_CHIPREV(x)	(((x) & 0xe0) >> 5)
+	u32 _unused2;
+	u8 _read[3];
+	volatile u8 read;
+	u32 _unused3;
+	u8 _dmasel[3];
+	volatile u8 dmasel;
+#define SGIOC_DMASEL_SCLK10MHZ	0x00	/* use 10MHZ serial clock */
+#define SGIOC_DMASEL_ISDNB	0x01	/* enable isdn B */
+#define SGIOC_DMASEL_ISDNA	0x02	/* enable isdn A */
+#define SGIOC_DMASEL_PPORT	0x04	/* use parallel DMA */
+#define SGIOC_DMASEL_SCLK667MHZ	0x10	/* use 6.67MHZ serial clock */
+#define SGIOC_DMASEL_SCLKEXT	0x20	/* use external serial clock */
+	u32 _unused4;
+	u8 _reset[3];
+	volatile u8 reset;
+#define SGIOC_RESET_PPORT	0x01	/* 0=parport reset, 1=nornal */
+#define SGIOC_RESET_KBDMOUSE	0x02	/* 0=kbdmouse reset, 1=normal */
+#define SGIOC_RESET_EISA	0x04	/* 0=eisa reset, 1=normal */
+#define SGIOC_RESET_ISDN	0x08	/* 0=isdn reset, 1=normal */
+#define SGIOC_RESET_LC0OFF	0x10	/* guiness: turn led off (red, else green) */
+#define SGIOC_RESET_LC1OFF	0x20	/* guiness: turn led off (green, else amber) */
+	u32 _unused5;
+	u8 _write[3];
+	volatile u8 write;
+#define SGIOC_WRITE_NTHRESH	0x01	/* use 4.5db threshhold */
+#define SGIOC_WRITE_TPSPEED	0x02	/* use 100ohm TP speed */
+#define SGIOC_WRITE_EPSEL	0x04	/* force cable mode: 1=AUI 0=TP */
+#define SGIOC_WRITE_EASEL	0x08	/* 1=autoselect 0=manual cable selection */
+#define SGIOC_WRITE_U1AMODE	0x10	/* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_U0AMODE	0x20	/* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_MLO		0x40	/* 1=4.75V 0=+5V */
+#define SGIOC_WRITE_MHI		0x80	/* 1=5.25V 0=+5V */
+	u32 _unused6;
+	struct sgint_regs int3;
+	u32 _unused7[16];
+	volatile u32 extio;		/* FullHouse only */
+#define EXTIO_S0_IRQ_3		0x8000	/* S0: vid.vsync */
+#define EXTIO_S0_IRQ_2		0x4000	/* S0: gfx.fifofull */
+#define EXTIO_S0_IRQ_1		0x2000	/* S0: gfx.int */
+#define EXTIO_S0_RETRACE	0x1000
+#define EXTIO_SG_IRQ_3		0x0800	/* SG: vid.vsync */
+#define EXTIO_SG_IRQ_2		0x0400	/* SG: gfx.fifofull */
+#define EXTIO_SG_IRQ_1		0x0200	/* SG: gfx.int */
+#define EXTIO_SG_RETRACE	0x0100
+#define EXTIO_GIO_33MHZ		0x0080
+#define EXTIO_EISA_BUSERR	0x0040
+#define EXTIO_MC_BUSERR		0x0020
+#define EXTIO_HPC3_BUSERR	0x0010
+#define EXTIO_S0_STAT_1		0x0008
+#define EXTIO_S0_STAT_0		0x0004
+#define EXTIO_SG_STAT_1		0x0002
+#define EXTIO_SG_STAT_0		0x0001
+};
+
+extern struct sgioc_regs *sgioc;
+extern struct sgint_regs *sgint;
+
+#endif
diff --git a/arch/mips/include/asm/sgi/ip22.h b/arch/mips/include/asm/sgi/ip22.h
new file mode 100644
index 0000000..c0501f9
--- /dev/null
+++ b/arch/mips/include/asm/sgi/ip22.h
@@ -0,0 +1,78 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ip22.h: Definitions for SGI IP22 machines
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ */
+
+#ifndef _SGI_IP22_H
+#define _SGI_IP22_H
+
+/*
+ * These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts
+ * are not supported this way. Driver is supposed to allocate HPC/MC
+ * interrupt as shareable and then look to proper status bit (see
+ * HAL2 driver). This will prevent many complications, trust me ;-)
+ */
+
+#include <irq.h>
+#include <asm/sgi/ioc.h>
+
+#define SGINT_EISA	0	/* 16 EISA irq levels (Indigo2) */
+#define SGINT_CPU	MIPS_CPU_IRQ_BASE	/* MIPS CPU define 8 interrupt sources */
+#define SGINT_LOCAL0	(SGINT_CPU+8)	/* 8 local0 irq levels */
+#define SGINT_LOCAL1	(SGINT_CPU+16)	/* 8 local1 irq levels */
+#define SGINT_LOCAL2	(SGINT_CPU+24)	/* 8 local2 vectored irq levels */
+#define SGINT_LOCAL3	(SGINT_CPU+32)	/* 8 local3 vectored irq levels */
+#define SGINT_END	(SGINT_CPU+40)	/* End of 'spaces' */
+
+/*
+ * Individual interrupt definitions for the Indy and Indigo2
+ */
+
+#define SGI_SOFT_0_IRQ	SGINT_CPU + 0
+#define SGI_SOFT_1_IRQ	SGINT_CPU + 1
+#define SGI_LOCAL_0_IRQ	SGINT_CPU + 2
+#define SGI_LOCAL_1_IRQ	SGINT_CPU + 3
+#define SGI_8254_0_IRQ	SGINT_CPU + 4
+#define SGI_8254_1_IRQ	SGINT_CPU + 5
+#define SGI_BUSERR_IRQ	SGINT_CPU + 6
+#define SGI_TIMER_IRQ	SGINT_CPU + 7
+
+#define SGI_FIFO_IRQ	SGINT_LOCAL0 + 0	/* FIFO full */
+#define SGI_GIO_0_IRQ	SGI_FIFO_IRQ		/* GIO-0 */
+#define SGI_WD93_0_IRQ	SGINT_LOCAL0 + 1	/* 1st onboard WD93 */
+#define SGI_WD93_1_IRQ	SGINT_LOCAL0 + 2	/* 2nd onboard WD93 */
+#define SGI_ENET_IRQ	SGINT_LOCAL0 + 3	/* onboard ethernet */
+#define SGI_MCDMA_IRQ	SGINT_LOCAL0 + 4	/* MC DMA done */
+#define SGI_PARPORT_IRQ	SGINT_LOCAL0 + 5	/* Parallel port */
+#define SGI_GIO_1_IRQ	SGINT_LOCAL0 + 6	/* GE / GIO-1 / 2nd-HPC */
+#define SGI_MAP_0_IRQ	SGINT_LOCAL0 + 7	/* Mappable interrupt 0 */
+
+#define SGI_GPL0_IRQ	SGINT_LOCAL1 + 0	/* General Purpose LOCAL1_N<0> */
+#define SGI_PANEL_IRQ	SGINT_LOCAL1 + 1	/* front panel */
+#define SGI_GPL2_IRQ	SGINT_LOCAL1 + 2	/* General Purpose LOCAL1_N<2> */
+#define SGI_MAP_1_IRQ	SGINT_LOCAL1 + 3	/* Mappable interrupt 1 */
+#define SGI_HPCDMA_IRQ	SGINT_LOCAL1 + 4	/* HPC DMA done */
+#define SGI_ACFAIL_IRQ	SGINT_LOCAL1 + 5	/* AC fail */
+#define SGI_VINO_IRQ	SGINT_LOCAL1 + 6	/* Indy VINO */
+#define SGI_GIO_2_IRQ	SGINT_LOCAL1 + 7	/* Vert retrace / GIO-2 */
+
+/* Mapped interrupts. These interrupts may be mapped to either 0, or 1 */
+#define SGI_VERT_IRQ	SGINT_LOCAL2 + 0	/* INT3: newport vertical status */
+#define SGI_EISA_IRQ	SGINT_LOCAL2 + 3	/* EISA interrupts */
+#define SGI_KEYBD_IRQ	SGINT_LOCAL2 + 4	/* keyboard */
+#define SGI_SERIAL_IRQ	SGINT_LOCAL2 + 5	/* onboard serial */
+
+#define ip22_is_fullhouse()	(sgioc->sysid & SGIOC_SYSID_FULLHOUSE)
+
+extern unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg);
+extern unsigned short ip22_nvram_read(int reg);
+
+#endif
diff --git a/arch/mips/include/asm/sgi/mc.h b/arch/mips/include/asm/sgi/mc.h
new file mode 100644
index 0000000..1576c23
--- /dev/null
+++ b/arch/mips/include/asm/sgi/mc.h
@@ -0,0 +1,231 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * mc.h: Definitions for SGI Memory Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+
+#ifndef _SGI_MC_H
+#define _SGI_MC_H
+
+struct sgimc_regs {
+	u32 _unused0;
+	volatile u32 cpuctrl0;	/* CPU control register 0, readwrite */
+#define SGIMC_CCTRL0_REFS	0x0000000f /* REFS mask */
+#define SGIMC_CCTRL0_EREFRESH	0x00000010 /* Memory refresh enable */
+#define SGIMC_CCTRL0_EPERRGIO	0x00000020 /* GIO parity error enable */
+#define SGIMC_CCTRL0_EPERRMEM	0x00000040 /* Main mem parity error enable */
+#define SGIMC_CCTRL0_EPERRCPU	0x00000080 /* CPU bus parity error enable */
+#define SGIMC_CCTRL0_WDOG	0x00000100 /* Watchdog timer enable */
+#define SGIMC_CCTRL0_SYSINIT	0x00000200 /* System init bit */
+#define SGIMC_CCTRL0_GFXRESET	0x00000400 /* Graphics interface reset */
+#define SGIMC_CCTRL0_EISALOCK	0x00000800 /* Lock CPU from memory for EISA */
+#define SGIMC_CCTRL0_EPERRSCMD	0x00001000 /* SysCMD bus parity error enable */
+#define SGIMC_CCTRL0_IENAB	0x00002000 /* Allow interrupts from MC */
+#define SGIMC_CCTRL0_ESNOOP	0x00004000 /* Snooping I/O enable */
+#define SGIMC_CCTRL0_EPROMWR	0x00008000 /* Prom writes from cpu enable */
+#define SGIMC_CCTRL0_WRESETPMEM	0x00010000 /* Perform warm reset, preserves mem */
+#define SGIMC_CCTRL0_LENDIAN	0x00020000 /* Put MC in little-endian mode */
+#define SGIMC_CCTRL0_WRESETDMEM	0x00040000 /* Warm reset, destroys mem contents */
+#define SGIMC_CCTRL0_CMEMBADPAR	0x02000000 /* Generate bad perr from cpu to mem */
+#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */
+#define SGIMC_CCTRL0_GIOBTOB	0x08000000 /* Allow GIO back to back writes */
+	u32 _unused1;
+	volatile u32 cpuctrl1;	/* CPU control register 1, readwrite */
+#define SGIMC_CCTRL1_EGIOTIMEO	0x00000010 /* GIO bus timeout enable */
+#define SGIMC_CCTRL1_FIXEDEHPC	0x00001000 /* Fixed HPC endianness */
+#define SGIMC_CCTRL1_LITTLEHPC	0x00002000 /* Little endian HPC */
+#define SGIMC_CCTRL1_FIXEDEEXP0	0x00004000 /* Fixed EXP0 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP0	0x00008000 /* Little endian EXP0 */
+#define SGIMC_CCTRL1_FIXEDEEXP1	0x00010000 /* Fixed EXP1 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP1	0x00020000 /* Little endian EXP1 */
+
+	u32 _unused2;
+	volatile u32 watchdogt;	/* Watchdog reg rdonly, write clears */
+
+	u32 _unused3;
+	volatile u32 systemid;	/* MC system ID register, readonly */
+#define SGIMC_SYSID_MASKREV	0x0000000f /* Revision of MC controller */
+#define SGIMC_SYSID_EPRESENT	0x00000010 /* Indicates presence of EISA bus */
+
+	u32 _unused4[3];
+	volatile u32 divider;	/* Divider reg for RPSS */
+
+	u32 _unused5;
+	u32 eeprom;		/* EEPROM byte reg for r4k */
+#define SGIMC_EEPROM_PRE	0x00000001 /* eeprom chip PRE pin assertion */
+#define SGIMC_EEPROM_CSEL	0x00000002 /* Active high, eeprom chip select */
+#define SGIMC_EEPROM_SECLOCK	0x00000004 /* EEPROM serial clock */
+#define SGIMC_EEPROM_SDATAO	0x00000008 /* Serial EEPROM data-out */
+#define SGIMC_EEPROM_SDATAI	0x00000010 /* Serial EEPROM data-in */
+
+	u32 _unused6[3];
+	volatile u32 rcntpre;	/* Preload refresh counter */
+
+	u32 _unused7;
+	volatile u32 rcounter;	/* Readonly refresh counter */
+
+	u32 _unused8[13];
+	volatile u32 giopar;	/* Parameter word for GIO64 */
+#define SGIMC_GIOPAR_HPC64	0x00000001 /* HPC talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_GFX64	0x00000002 /* GFX talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_EXP064	0x00000004 /* EXP(slot0) talks using 64-bits */
+#define SGIMC_GIOPAR_EXP164	0x00000008 /* EXP(slot1) talks using 64-bits */
+#define SGIMC_GIOPAR_EISA64	0x00000010 /* EISA bus talks 64-bits to GIO */
+#define SGIMC_GIOPAR_HPC264	0x00000020 /* 2nd HPX talks 64-bits to GIO */
+#define SGIMC_GIOPAR_RTIMEGFX	0x00000040 /* GFX device has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP0	0x00000080 /* EXP(slot0) has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP1	0x00000100 /* EXP(slot1) has realtime attr */
+#define SGIMC_GIOPAR_MASTEREISA	0x00000200 /* EISA bus can act as bus master */
+#define SGIMC_GIOPAR_ONEBUS	0x00000400 /* Exists one GIO64 pipelined bus */
+#define SGIMC_GIOPAR_MASTERGFX	0x00000800 /* GFX can act as a bus master */
+#define SGIMC_GIOPAR_MASTEREXP0	0x00001000 /* EXP(slot0) can bus master */
+#define SGIMC_GIOPAR_MASTEREXP1	0x00002000 /* EXP(slot1) can bus master */
+#define SGIMC_GIOPAR_PLINEEXP0	0x00004000 /* EXP(slot0) has pipeline attr */
+#define SGIMC_GIOPAR_PLINEEXP1	0x00008000 /* EXP(slot1) has pipeline attr */
+
+	u32 _unused9;
+	volatile u32 cputp;	/* CPU bus arb time period */
+
+	u32 _unused10[3];
+	volatile u32 lbursttp;	/* Time period for long bursts */
+
+	/* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must
+	 * be the same size. The size encoding for supported SIMMs is bellow */
+	u32 _unused11[9];
+	volatile u32 mconfig0;	/* Memory config register zero */
+	u32 _unused12;
+	volatile u32 mconfig1;	/* Memory config register one */
+#define SGIMC_MCONFIG_BASEADDR	0x000000ff /* Base address of bank*/
+#define SGIMC_MCONFIG_RMASK	0x00001f00 /* Ram config bitmask */
+#define SGIMC_MCONFIG_BVALID	0x00002000 /* Bank is valid */
+#define SGIMC_MCONFIG_SBANKS	0x00004000 /* Number of subbanks */
+
+	u32 _unused13;
+	volatile u32 cmacc;        /* Mem access config for CPU */
+	u32 _unused14;
+	volatile u32 gmacc;        /* Mem access config for GIO */
+
+	/* This define applies to both cmacc and gmacc registers above. */
+#define SGIMC_MACC_ALIASBIG	0x20000000 /* 512MB home for alias */
+
+	/* Error address/status regs from GIO and CPU perspectives. */
+	u32 _unused15;
+	volatile u32 cerr;	/* Error address reg for CPU */
+	u32 _unused16;
+	volatile u32 cstat;	/* Status reg for CPU */
+#define SGIMC_CSTAT_RD		0x00000100 /* read parity error */
+#define SGIMC_CSTAT_PAR		0x00000200 /* CPU parity error */
+#define SGIMC_CSTAT_ADDR	0x00000400 /* memory bus error bad addr */
+#define SGIMC_CSTAT_SYSAD_PAR	0x00000800 /* sysad parity error */
+#define SGIMC_CSTAT_SYSCMD_PAR	0x00001000 /* syscmd parity error */
+#define SGIMC_CSTAT_BAD_DATA	0x00002000 /* bad data identifier */
+#define SGIMC_CSTAT_PAR_MASK	0x00001f00 /* parity error mask */
+#define SGIMC_CSTAT_RD_PAR	(SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR)
+
+	u32 _unused17;
+	volatile u32 gerr;	/* Error address reg for GIO */
+	u32 _unused18;
+	volatile u32 gstat;	/* Status reg for GIO */
+#define SGIMC_GSTAT_RD		0x00000100 /* read parity error */
+#define SGIMC_GSTAT_WR		0x00000200 /* write parity error */
+#define SGIMC_GSTAT_TIME	0x00000400 /* GIO bus timed out */
+#define SGIMC_GSTAT_PROM	0x00000800 /* write to PROM when PROM_EN not set */
+#define SGIMC_GSTAT_ADDR	0x00001000 /* parity error on addr cycle */
+#define SGIMC_GSTAT_BC		0x00002000 /* parity error on byte count cycle */
+#define SGIMC_GSTAT_PIO_RD	0x00004000 /* read data parity on pio */
+#define SGIMC_GSTAT_PIO_WR	0x00008000 /* write data parity on pio */
+
+	/* Special hard bus locking registers. */
+	u32 _unused19;
+	volatile u32 syssembit;		/* Uni-bit system semaphore */
+	u32 _unused20;
+	volatile u32 mlock;		/* Global GIO memory access lock */
+	u32 _unused21;
+	volatile u32 elock;		/* Locks EISA from GIO accesses */
+
+	/* GIO dma control registers. */
+	u32 _unused22[15];
+	volatile u32 gio_dma_trans;	/* DMA mask to translation GIO addrs */
+	u32 _unused23;
+	volatile u32 gio_dma_sbits;	/* DMA GIO addr substitution bits */
+	u32 _unused24;
+	volatile u32 dma_intr_cause;	/* DMA IRQ cause indicator bits */
+	u32 _unused25;
+	volatile u32 dma_ctrl;		/* Main DMA control reg */
+
+	/* DMA TLB entry 0 */
+	u32 _unused26[5];
+	volatile u32 dtlb_hi0;
+	u32 _unused27;
+	volatile u32 dtlb_lo0;
+
+	/* DMA TLB entry 1 */
+	u32 _unused28;
+	volatile u32 dtlb_hi1;
+	u32 _unused29;
+	volatile u32 dtlb_lo1;
+
+	/* DMA TLB entry 2 */
+	u32 _unused30;
+	volatile u32 dtlb_hi2;
+	u32 _unused31;
+	volatile u32 dtlb_lo2;
+
+	/* DMA TLB entry 3 */
+	u32 _unused32;
+	volatile u32 dtlb_hi3;
+	u32 _unused33;
+	volatile u32 dtlb_lo3;
+
+	u32 _unused34[0x0392];
+
+	u32 _unused35;
+	volatile u32 rpsscounter;	/* Chirps at 100ns */
+
+	u32 _unused36[0x1000/4-2*4];
+
+	u32 _unused37;
+	volatile u32 maddronly;		/* Address DMA goes at */
+	u32 _unused38;
+	volatile u32 maddrpdeflts;	/* Same as above, plus set defaults */
+	u32 _unused39;
+	volatile u32 dmasz;		/* DMA count */
+	u32 _unused40;
+	volatile u32 ssize;		/* DMA stride size */
+	u32 _unused41;
+	volatile u32 gmaddronly;	/* Set GIO DMA but don't start trans */
+	u32 _unused42;
+	volatile u32 dmaddnpgo;		/* Set GIO DMA addr + start transfer */
+	u32 _unused43;
+	volatile u32 dmamode;		/* DMA mode config bit settings */
+	u32 _unused44;
+	volatile u32 dmaccount;		/* Zoom and byte count for DMA */
+	u32 _unused45;
+	volatile u32 dmastart;		/* Pedal to the metal. */
+	u32 _unused46;
+	volatile u32 dmarunning;	/* DMA op is in progress */
+	u32 _unused47;
+	volatile u32 maddrdefstart;	/* Set dma addr, defaults, and kick it */
+};
+
+extern struct sgimc_regs *sgimc;
+#define SGIMC_BASE		0x1fa00000	/* physical */
+
+/* Base location of the two ram banks found in IP2[0268] machines. */
+#define SGIMC_SEG0_BADDR	0x08000000
+#define SGIMC_SEG1_BADDR	0x20000000
+
+/* Maximum size of the above banks are per machine. */
+#define SGIMC_SEG0_SIZE_ALL		0x10000000 /* 256MB */
+#define SGIMC_SEG1_SIZE_IP20_IP22	0x08000000 /* 128MB */
+#define SGIMC_SEG1_SIZE_IP26_IP28	0x20000000 /* 512MB */
+
+extern void sgimc_init(void);
+
+#endif /* _SGI_MC_H */
diff --git a/arch/mips/include/asm/sgi/pi1.h b/arch/mips/include/asm/sgi/pi1.h
new file mode 100644
index 0000000..c950691
--- /dev/null
+++ b/arch/mips/include/asm/sgi/pi1.h
@@ -0,0 +1,71 @@
+/*
+ * pi1.h: Definitions for SGI PI1 parallel port
+ */
+
+#ifndef _SGI_PI1_H
+#define _SGI_PI1_H
+
+struct pi1_regs {
+	u8 _data[3];
+	volatile u8 data;
+	u8 _ctrl[3];
+	volatile u8 ctrl;
+#define PI1_CTRL_STROBE_N	0x01
+#define PI1_CTRL_AFD_N		0x02
+#define PI1_CTRL_INIT_N		0x04
+#define PI1_CTRL_SLIN_N		0x08
+#define PI1_CTRL_IRQ_ENA	0x10
+#define PI1_CTRL_DIR		0x20
+#define PI1_CTRL_SEL		0x40
+	u8 _status[3];
+	volatile u8 status;
+#define PI1_STAT_DEVID		0x03	/* bits 0-1 */
+#define PI1_STAT_NOINK		0x04	/* SGI MODE only */
+#define PI1_STAT_ERROR		0x08
+#define PI1_STAT_ONLINE		0x10
+#define PI1_STAT_PE		0x20
+#define PI1_STAT_ACK		0x40
+#define PI1_STAT_BUSY		0x80
+	u8 _dmactrl[3];
+	volatile u8 dmactrl;
+#define PI1_DMACTRL_FIFO_EMPTY	0x01    /* fifo empty R/O */
+#define PI1_DMACTRL_ABORT	0x02    /* reset DMA and internal fifo W/O */
+#define PI1_DMACTRL_STDMODE	0x00    /* bits 2-3 */
+#define PI1_DMACTRL_SGIMODE	0x04    /* bits 2-3 */
+#define PI1_DMACTRL_RICOHMODE	0x08    /* bits 2-3 */
+#define PI1_DMACTRL_HPMODE	0x0c    /* bits 2-3 */
+#define PI1_DMACTRL_BLKMODE	0x10    /* block mode */
+#define PI1_DMACTRL_FIFO_CLEAR	0x20    /* clear fifo W/O */
+#define PI1_DMACTRL_READ	0x40    /* read */
+#define PI1_DMACTRL_RUN		0x80    /* pedal to the metal */
+	u8 _intstat[3];
+	volatile u8 intstat;
+#define PI1_INTSTAT_ACK		0x04
+#define PI1_INTSTAT_FEMPTY	0x08
+#define PI1_INTSTAT_NOINK	0x10
+#define PI1_INTSTAT_ONLINE	0x20
+#define PI1_INTSTAT_ERR		0x40
+#define PI1_INTSTAT_PE		0x80
+	u8 _intmask[3];
+	volatile u8 intmask;		/* enabled low, reset high*/
+#define PI1_INTMASK_ACK		0x04
+#define PI1_INTMASK_FIFO_EMPTY	0x08
+#define PI1_INTMASK_NOINK	0x10
+#define PI1_INTMASK_ONLINE	0x20
+#define PI1_INTMASK_ERR		0x40
+#define PI1_INTMASK_PE		0x80
+	u8 _timer1[3];
+	volatile u8 timer1;
+#define PI1_TIME1		0x27
+	u8 _timer2[3];
+	volatile u8 timer2;
+#define PI1_TIME2		0x13
+	u8 _timer3[3];
+	volatile u8 timer3;
+#define PI1_TIME3		0x10
+	u8 _timer4[3];
+	volatile u8 timer4;
+#define PI1_TIME4		0x00
+};
+
+#endif
diff --git a/arch/mips/include/asm/sgi/seeq.h b/arch/mips/include/asm/sgi/seeq.h
new file mode 100644
index 0000000..af0ffd7
--- /dev/null
+++ b/arch/mips/include/asm/sgi/seeq.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_SGI_SEEQ_H
+#define __ASM_SGI_SEEQ_H
+
+#include <linux/if_ether.h>
+
+#include <asm/sgi/hpc3.h>
+
+struct sgiseeq_platform_data {
+	struct hpc3_regs *hpc;
+	unsigned int irq;
+	unsigned char mac[ETH_ALEN];
+};
+
+#endif /* __ASM_SGI_SEEQ_H */
diff --git a/arch/mips/include/asm/sgi/sgi.h b/arch/mips/include/asm/sgi/sgi.h
new file mode 100644
index 0000000..645cea7
--- /dev/null
+++ b/arch/mips/include/asm/sgi/sgi.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * sgi.h: Definitions specific to SGI machines.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@sgi.com)
+ */
+#ifndef _ASM_SGI_SGI_H
+#define _ASM_SGI_SGI_H
+
+/* UP=UniProcessor MP=MultiProcessor(capable) */
+enum sgi_mach {
+	ip4,	/* R2k UP */
+	ip5,	/* R2k MP */
+	ip6,	/* R3k UP */
+	ip7,	/* R3k MP */
+	ip9,	/* R3k UP */
+	ip12,	/* R3kA UP, Indigo */
+	ip15,	/* R3kA MP */
+	ip17,	/* R4K UP */
+	ip19,	/* R4K MP */
+	ip20,	/* R4K UP, Indigo */
+	ip21,	/* TFP MP */
+	ip22,	/* R4x00 UP, Indigo2 */
+	ip25,	/* R10k MP */
+	ip26,	/* TFP UP, Indigo2 */
+	ip27,	/* R10k MP, R12k MP, Origin */
+	ip28,	/* R10k UP, Indigo2 */
+	ip30,	/* Octane */
+	ip32,	/* O2 */
+};
+
+extern enum sgi_mach sgimach;
+extern void sgi_sysinit(void);
+
+/* Many I/O space registers are byte sized and are contained within
+ * one byte per word, specifically the MSB, this macro helps out.
+ */
+#ifdef __MIPSEL__
+#define SGI_MSB(regaddr)   (regaddr)
+#else
+#define SGI_MSB(regaddr)   ((regaddr) | 0x3)
+#endif
+
+#endif /* _ASM_SGI_SGI_H */
diff --git a/arch/mips/include/asm/sgi/wd.h b/arch/mips/include/asm/sgi/wd.h
new file mode 100644
index 0000000..0d6c3a4
--- /dev/null
+++ b/arch/mips/include/asm/sgi/wd.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_SGI_WD_H
+#define __ASM_SGI_WD_H
+
+#include <asm/sgi/hpc3.h>
+
+struct sgiwd93_platform_data {
+	unsigned int unit;
+	unsigned int irq;
+	struct hpc3_scsiregs *hregs;
+	unsigned char *wdregs;
+};
+
+#endif /* __ASM_SGI_WD_H */
diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h
new file mode 100644
index 0000000..bfce5c7
--- /dev/null
+++ b/arch/mips/include/asm/sgialib.h
@@ -0,0 +1,124 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI ARCS firmware interface library for the Linux kernel.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 2001, 2002 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SGIALIB_H
+#define _ASM_SGIALIB_H
+
+#include <asm/sgiarcs.h>
+
+extern struct linux_romvec *romvec;
+extern int prom_argc;
+
+extern LONG *_prom_argv, *_prom_envp;
+
+/* A 32-bit ARC PROM pass arguments and environment as 32-bit pointer.
+   These macros take care of sign extension.  */
+#define prom_argv(index) ((char *) (long) _prom_argv[(index)])
+#define prom_argc(index) ((char *) (long) _prom_argc[(index)])
+
+extern int prom_flags;
+
+#define PROM_FLAG_ARCS			1
+#define PROM_FLAG_USE_AS_CONSOLE	2
+#define PROM_FLAG_DONT_FREE_TEMP	4
+
+/* Simple char-by-char console I/O. */
+extern void prom_putchar(char c);
+extern char prom_getchar(void);
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS    32
+struct prom_pmemblock {
+	LONG	base;		/* Within KSEG0 or XKPHYS. */
+	ULONG	size;		/* In bytes. */
+	ULONG	type;		/* free or prom memory */
+};
+
+/* Get next memory descriptor after CURR, returns first descriptor
+ * in chain is CURR is NULL.
+ */
+extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr);
+#define PROM_NULL_MDESC   ((struct linux_mdesc *) 0)
+
+/* Called by prom_init to setup the physical memory pmemblock
+ * array.
+ */
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+
+/* PROM device tree library routines. */
+#define PROM_NULL_COMPONENT ((pcomponent *) 0)
+
+/* Get sibling component of THIS. */
+extern pcomponent *ArcGetPeer(pcomponent *this);
+
+/* Get child component of THIS. */
+extern pcomponent *ArcGetChild(pcomponent *this);
+
+/* Get parent component of CHILD. */
+extern pcomponent *prom_getparent(pcomponent *child);
+
+/* Copy component opaque data of component THIS into BUFFER
+ * if component THIS has opaque data.  Returns success or
+ * failure status.
+ */
+extern long prom_getcdata(void *buffer, pcomponent *this);
+
+/* Other misc. component routines. */
+extern pcomponent *prom_childadd(pcomponent *this, pcomponent *tmp, void *data);
+extern long prom_delcomponent(pcomponent *this);
+extern pcomponent *prom_componentbypath(char *path);
+
+/* This is called at prom_init time to identify the
+ * ARC architecture we are running on
+ */
+extern void prom_identify_arch(void);
+
+/* Environment variable routines. */
+extern PCHAR ArcGetEnvironmentVariable(PCHAR name);
+extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value);
+
+/* ARCS command line acquisition and parsing. */
+extern char *prom_getcmdline(void);
+extern void prom_init_cmdline(void);
+
+/* Acquiring info about the current time, etc. */
+extern struct linux_tinfo *prom_gettinfo(void);
+extern unsigned long prom_getrtime(void);
+
+/* File operations. */
+extern long prom_getvdirent(unsigned long fd, struct linux_vdirent *ent, unsigned long num, unsigned long *cnt);
+extern long prom_open(char *name, enum linux_omode md, unsigned long *fd);
+extern long prom_close(unsigned long fd);
+extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
+extern long prom_getrstatus(unsigned long fd);
+extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
+extern long prom_seek(unsigned long fd, struct linux_bigint *off, enum linux_seekmode sm);
+extern long prom_mount(char *name, enum linux_mountops op);
+extern long prom_getfinfo(unsigned long fd, struct linux_finfo *buf);
+extern long prom_setfinfo(unsigned long fd, unsigned long flags, unsigned long msk);
+
+/* Running stand-along programs. */
+extern long prom_load(char *name, unsigned long end, unsigned long *pc, unsigned long *eaddr);
+extern long prom_invoke(unsigned long pc, unsigned long sp, long argc, char **argv, char **envp);
+extern long prom_exec(char *name, long argc, char **argv, char **envp);
+
+/* Misc. routines. */
+extern VOID prom_halt(VOID) __attribute__((noreturn));
+extern VOID prom_powerdown(VOID) __attribute__((noreturn));
+extern VOID prom_restart(VOID) __attribute__((noreturn));
+extern VOID ArcReboot(VOID) __attribute__((noreturn));
+extern VOID ArcEnterInteractiveMode(VOID) __attribute__((noreturn));
+extern long prom_cfgsave(VOID);
+extern struct linux_sysid *prom_getsysid(VOID);
+extern VOID ArcFlushAllCaches(VOID);
+extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID);
+
+#endif /* _ASM_SGIALIB_H */
diff --git a/arch/mips/include/asm/sgiarcs.h b/arch/mips/include/asm/sgiarcs.h
new file mode 100644
index 0000000..721327f
--- /dev/null
+++ b/arch/mips/include/asm/sgiarcs.h
@@ -0,0 +1,548 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ARC firmware interface defines.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1999, 2001 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SGIARCS_H
+#define _ASM_SGIARCS_H
+
+#include <asm/types.h>
+#include <asm/fw/arc/types.h>
+
+/* Various ARCS error codes. */
+#define PROM_ESUCCESS                   0x00
+#define PROM_E2BIG                      0x01
+#define PROM_EACCESS                    0x02
+#define PROM_EAGAIN                     0x03
+#define PROM_EBADF                      0x04
+#define PROM_EBUSY                      0x05
+#define PROM_EFAULT                     0x06
+#define PROM_EINVAL                     0x07
+#define PROM_EIO                        0x08
+#define PROM_EISDIR                     0x09
+#define PROM_EMFILE                     0x0a
+#define PROM_EMLINK                     0x0b
+#define PROM_ENAMETOOLONG               0x0c
+#define PROM_ENODEV                     0x0d
+#define PROM_ENOENT                     0x0e
+#define PROM_ENOEXEC                    0x0f
+#define PROM_ENOMEM                     0x10
+#define PROM_ENOSPC                     0x11
+#define PROM_ENOTDIR                    0x12
+#define PROM_ENOTTY                     0x13
+#define PROM_ENXIO                      0x14
+#define PROM_EROFS                      0x15
+/* SGI ARCS specific errno's. */
+#define PROM_EADDRNOTAVAIL              0x1f
+#define PROM_ETIMEDOUT                  0x20
+#define PROM_ECONNABORTED               0x21
+#define PROM_ENOCONNECT                 0x22
+
+/* Device classes, types, and identifiers for prom
+ * device inventory queries.
+ */
+enum linux_devclass {
+	system, processor, cache, adapter, controller, peripheral, memory
+};
+
+enum linux_devtypes {
+	/* Generic stuff. */
+	Arc, Cpu, Fpu,
+
+	/* Primary insn and data caches. */
+	picache, pdcache,
+
+	/* Secondary insn, data, and combined caches. */
+	sicache, sdcache, sccache,
+
+	memdev, eisa_adapter, tc_adapter, scsi_adapter, dti_adapter,
+	multifunc_adapter, dsk_controller, tp_controller, cdrom_controller,
+	worm_controller, serial_controller, net_controller, disp_controller,
+	parallel_controller, ptr_controller, kbd_controller, audio_controller,
+	misc_controller, disk_peripheral, flpy_peripheral, tp_peripheral,
+	modem_peripheral, monitor_peripheral, printer_peripheral,
+	ptr_peripheral, kbd_peripheral, term_peripheral, line_peripheral,
+	net_peripheral, misc_peripheral, anon
+};
+
+enum linux_identifier {
+	bogus, ronly, removable, consin, consout, input, output
+};
+
+/* A prom device tree component. */
+struct linux_component {
+	enum linux_devclass     class;	/* node class */
+	enum linux_devtypes     type;	/* node type */
+	enum linux_identifier   iflags;	/* node flags */
+	USHORT 			vers;	/* node version */
+	USHORT 			rev;	/* node revision */
+	ULONG 			key;	/* completely magic */
+	ULONG 			amask;	/* XXX affinity mask??? */
+	ULONG			cdsize;	/* size of configuration data */
+	ULONG			ilen;	/* length of string identifier */
+	_PULONG			iname;	/* string identifier */
+};
+typedef struct linux_component pcomponent;
+
+struct linux_sysid {
+	char vend[8], prod[8];
+};
+
+/* ARCS prom memory descriptors. */
+enum arcs_memtypes {
+	arcs_eblock,  /* exception block */
+	arcs_rvpage,  /* ARCS romvec page */
+	arcs_fcontig, /* Contiguous and free */
+	arcs_free,    /* Generic free memory */
+	arcs_bmem,    /* Borken memory, don't use */
+	arcs_prog,    /* A loaded program resides here */
+	arcs_atmp,    /* ARCS temporary storage area, wish Sparc OpenBoot told this */
+	arcs_aperm,   /* ARCS permanent storage... */
+};
+
+/* ARC has slightly different types than ARCS */
+enum arc_memtypes {
+	arc_eblock,  /* exception block */
+	arc_rvpage,  /* romvec page */
+	arc_free,    /* Generic free memory */
+	arc_bmem,    /* Borken memory, don't use */
+	arc_prog,    /* A loaded program resides here */
+	arc_atmp,    /* temporary storage area */
+	arc_aperm,   /* permanent storage */
+	arc_fcontig, /* Contiguous and free */
+};
+
+union linux_memtypes {
+    enum arcs_memtypes arcs;
+    enum arc_memtypes arc;
+};
+
+struct linux_mdesc {
+	union linux_memtypes type;
+	ULONG base;
+	ULONG pages;
+};
+
+/* Time of day descriptor. */
+struct linux_tinfo {
+	unsigned short yr;
+	unsigned short mnth;
+	unsigned short day;
+	unsigned short hr;
+	unsigned short min;
+	unsigned short sec;
+	unsigned short msec;
+};
+
+/* ARCS virtual dirents. */
+struct linux_vdirent {
+	ULONG namelen;
+	unsigned char attr;
+	char fname[32]; /* XXX imperical, should be a define */
+};
+
+/* Other stuff for files. */
+enum linux_omode {
+	rdonly, wronly, rdwr, wronly_creat, rdwr_creat,
+	wronly_ssede, rdwr_ssede, dirent, dirent_creat
+};
+
+enum linux_seekmode {
+	absolute, relative
+};
+
+enum linux_mountops {
+	media_load, media_unload
+};
+
+/* This prom has a bolixed design. */
+struct linux_bigint {
+#ifdef __MIPSEL__
+	u32 lo;
+	s32 hi;
+#else /* !(__MIPSEL__) */
+	s32 hi;
+	u32 lo;
+#endif
+};
+
+struct linux_finfo {
+	struct linux_bigint   begin;
+	struct linux_bigint   end;
+	struct linux_bigint   cur;
+	enum linux_devtypes   dtype;
+	unsigned long         namelen;
+	unsigned char         attr;
+	char                  name[32]; /* XXX imperical, should be define */
+};
+
+/* This describes the vector containing function pointers to the ARC
+   firmware functions.  */
+struct linux_romvec {
+	LONG	load;			/* Load an executable image. */
+	LONG	invoke;			/* Invoke a standalong image. */
+	LONG	exec;			/* Load and begin execution of a
+					   standalone image. */
+	LONG	halt;			/* Halt the machine. */
+	LONG	pdown;			/* Power down the machine. */
+	LONG	restart;		/* XXX soft reset??? */
+	LONG	reboot;			/* Reboot the machine. */
+	LONG	imode;			/* Enter PROM interactive mode. */
+	LONG	_unused1;		/* Was ReturnFromMain(). */
+
+	/* PROM device tree interface. */
+	LONG	next_component;
+	LONG	child_component;
+	LONG	parent_component;
+	LONG	component_data;
+	LONG	child_add;
+	LONG	comp_del;
+	LONG	component_by_path;
+
+	/* Misc. stuff. */
+	LONG	cfg_save;
+	LONG	get_sysid;
+
+	/* Probing for memory. */
+	LONG	get_mdesc;
+	LONG	_unused2;		/* was Signal() */
+
+	LONG	get_tinfo;
+	LONG	get_rtime;
+
+	/* File type operations. */
+	LONG	get_vdirent;
+	LONG	open;
+	LONG	close;
+	LONG	read;
+	LONG	get_rstatus;
+	LONG	write;
+	LONG	seek;
+	LONG	mount;
+
+	/* Dealing with firmware environment variables. */
+	LONG	get_evar;
+	LONG	set_evar;
+
+	LONG	get_finfo;
+	LONG	set_finfo;
+
+	/* Miscellaneous. */
+	LONG	cache_flush;
+	LONG	TestUnicodeCharacter;		/* ARC; not sure if ARCS too */
+	LONG	GetDisplayStatus;
+};
+
+/* The SGI ARCS parameter block is in a fixed location for standalone
+ * programs to access PROM facilities easily.
+ */
+typedef struct _SYSTEM_PARAMETER_BLOCK {
+	ULONG			magic;		/* magic cookie */
+#define PROMBLOCK_MAGIC      0x53435241
+
+	ULONG			len;		/* length of parm block */
+	USHORT			ver;		/* ARCS firmware version */
+	USHORT			rev;		/* ARCS firmware revision */
+	_PLONG			rs_block;	/* Restart block. */
+	_PLONG			dbg_block;	/* Debug block. */
+	_PLONG			gevect;		/* XXX General vector??? */
+	_PLONG			utlbvect;	/* XXX UTLB vector??? */
+	ULONG			rveclen;	/* Size of romvec struct. */
+	_PVOID			romvec;		/* Function interface. */
+	ULONG			pveclen;	/* Length of private vector. */
+	_PVOID			pvector;	/* Private vector. */
+	ULONG			adap_cnt;	/* Adapter count. */
+	ULONG			adap_typ0;	/* First adapter type. */
+	ULONG			adap_vcnt0;	/* Adapter 0 vector count. */
+	_PVOID			adap_vector;	/* Adapter 0 vector ptr. */
+	ULONG			adap_typ1;	/* Second adapter type. */
+	ULONG			adap_vcnt1;	/* Adapter 1 vector count. */
+	_PVOID			adap_vector1;	/* Adapter 1 vector ptr. */
+	/* More adapter vectors go here... */
+} SYSTEM_PARAMETER_BLOCK, *PSYSTEM_PARAMETER_BLOCK;
+
+#define PROMBLOCK ((PSYSTEM_PARAMETER_BLOCK) (int)0xA0001000)
+#define ROMVECTOR ((struct linux_romvec *) (long)(PROMBLOCK)->romvec)
+
+/* Cache layout parameter block. */
+union linux_cache_key {
+	struct param {
+#ifdef __MIPSEL__
+		unsigned short size;
+		unsigned char lsize;
+		unsigned char bsize;
+#else /* !(__MIPSEL__) */
+		unsigned char bsize;
+		unsigned char lsize;
+		unsigned short size;
+#endif
+	} info;
+	unsigned long allinfo;
+};
+
+/* Configuration data. */
+struct linux_cdata {
+	char *name;
+	int mlen;
+	enum linux_devtypes type;
+};
+
+/* Common SGI ARCS firmware file descriptors. */
+#define SGIPROM_STDIN     0
+#define SGIPROM_STDOUT    1
+
+/* Common SGI ARCS firmware file types. */
+#define SGIPROM_ROFILE    0x01  /* read-only file */
+#define SGIPROM_HFILE     0x02  /* hidden file */
+#define SGIPROM_SFILE     0x04  /* System file */
+#define SGIPROM_AFILE     0x08  /* Archive file */
+#define SGIPROM_DFILE     0x10  /* Directory file */
+#define SGIPROM_DELFILE   0x20  /* Deleted file */
+
+/* SGI ARCS boot record information. */
+struct sgi_partition {
+	unsigned char flag;
+#define SGIPART_UNUSED 0x00
+#define SGIPART_ACTIVE 0x80
+
+	unsigned char shead, ssect, scyl; /* unused */
+	unsigned char systype; /* OS type, Irix or NT */
+	unsigned char ehead, esect, ecyl; /* unused */
+	unsigned char rsect0, rsect1, rsect2, rsect3;
+	unsigned char tsect0, tsect1, tsect2, tsect3;
+};
+
+#define SGIBBLOCK_MAGIC   0xaa55
+#define SGIBBLOCK_MAXPART 0x0004
+
+struct sgi_bootblock {
+	unsigned char _unused[446];
+	struct sgi_partition partitions[SGIBBLOCK_MAXPART];
+	unsigned short magic;
+};
+
+/* BIOS parameter block. */
+struct sgi_bparm_block {
+	unsigned short bytes_sect;    /* bytes per sector */
+	unsigned char  sect_clust;    /* sectors per cluster */
+	unsigned short sect_resv;     /* reserved sectors */
+	unsigned char  nfats;         /* # of allocation tables */
+	unsigned short nroot_dirents; /* # of root directory entries */
+	unsigned short sect_volume;   /* sectors in volume */
+	unsigned char  media_type;    /* media descriptor */
+	unsigned short sect_fat;      /* sectors per allocation table */
+	unsigned short sect_track;    /* sectors per track */
+	unsigned short nheads;        /* # of heads */
+	unsigned short nhsects;       /* # of hidden sectors */
+};
+
+struct sgi_bsector {
+	unsigned char   jmpinfo[3];
+	unsigned char   manuf_name[8];
+	struct sgi_bparm_block info;
+};
+
+/* Debugging block used with SGI symmon symbolic debugger. */
+#define SMB_DEBUG_MAGIC   0xfeeddead
+struct linux_smonblock {
+	unsigned long   magic;
+	void            (*handler)(void);  /* Breakpoint routine. */
+	unsigned long   dtable_base;       /* Base addr of dbg table. */
+	int             (*printf)(const char *fmt, ...);
+	unsigned long   btable_base;       /* Breakpoint table. */
+	unsigned long   mpflushreqs;       /* SMP cache flush request list. */
+	unsigned long   ntab;              /* Name table. */
+	unsigned long   stab;              /* Symbol table. */
+	int             smax;              /* Max # of symbols. */
+};
+
+/*
+ * Macros for calling a 32-bit ARC implementation from 64-bit code
+ */
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_ARC32)
+
+#define __arc_clobbers							\
+	"$2", "$3" /* ... */, "$8", "$9", "$10", "$11", 			\
+	"$12", "$13", "$14", "$15", "$16", "$24", "$25", "$31"
+
+#define ARC_CALL0(dest)							\
+({	long __res;							\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec)							\
+	: __arc_clobbers, "$4", "$5", "$6", "$7");			\
+	(unsigned long) __res;						\
+})
+
+#define ARC_CALL1(dest, a1)						\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1)					\
+	: __arc_clobbers, "$5", "$6", "$7");				\
+	(unsigned long) __res;						\
+})
+
+#define ARC_CALL2(dest, a1, a2)						\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1), "r" (__a2)				\
+	: __arc_clobbers, "$6", "$7");					\
+	__res;								\
+})
+
+#define ARC_CALL3(dest, a1, a2, a3)					\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	register signed int __a3 __asm__("$6") = (int) (long) (a3);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3)		\
+	: __arc_clobbers, "$7");					\
+	__res;								\
+})
+
+#define ARC_CALL4(dest, a1, a2, a3, a4)					\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	register signed int __a3 __asm__("$6") = (int) (long) (a3);	\
+	register signed int __a4 __asm__("$7") = (int) (long) (a4);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), 		\
+	  "r" (__a4)							\
+	: __arc_clobbers);						\
+	__res;								\
+})
+
+#define ARC_CALL5(dest, a1, a2, a3, a4, a5)					\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	register signed int __a3 __asm__("$6") = (int) (long) (a3);	\
+	register signed int __a4 __asm__("$7") = (int) (long) (a4);	\
+	register signed int __a5 = (int) (long) (a5);			\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"sw\t%7, 16($29)\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), 							\
+	  "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), 		\
+	  "r" (__a5)							\
+	: __arc_clobbers);						\
+	__res;								\
+})
+
+#endif /* defined(CONFIG_64BIT) && defined(CONFIG_ARC32) */
+
+#if (defined(CONFIG_32BIT) && defined(CONFIG_ARC32)) ||		\
+    (defined(CONFIG_64BIT) && defined(CONFIG_ARC64))
+
+#define ARC_CALL0(dest)							\
+({	long __res;							\
+	long (*__vec)(void) = (void *) romvec->dest;			\
+									\
+	__res = __vec();						\
+	__res;								\
+})
+
+#define ARC_CALL1(dest, a1)						\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long (*__vec)(long) = (void *) romvec->dest;			\
+									\
+	__res = __vec(__a1);						\
+	__res;								\
+})
+
+#define ARC_CALL2(dest, a1, a2)						\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long (*__vec)(long, long) = (void *) romvec->dest;		\
+									\
+	__res = __vec(__a1, __a2);					\
+	__res;								\
+})
+
+#define ARC_CALL3(dest, a1, a2, a3)					\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long __a3 = (long) (a3);					\
+	long (*__vec)(long, long, long)	= (void *) romvec->dest;	\
+									\
+	__res = __vec(__a1, __a2, __a3);				\
+	__res;								\
+})
+
+#define ARC_CALL4(dest, a1, a2, a3, a4)					\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long __a3 = (long) (a3);					\
+	long __a4 = (long) (a4);					\
+	long (*__vec)(long, long, long, long) = (void *) romvec->dest;	\
+									\
+	__res = __vec(__a1, __a2, __a3, __a4);				\
+	__res;								\
+})
+
+#define ARC_CALL5(dest, a1, a2, a3, a4, a5)				\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long __a3 = (long) (a3);					\
+	long __a4 = (long) (a4);					\
+	long __a5 = (long) (a5);					\
+	long (*__vec)(long, long, long, long, long);			\
+	__vec = (void *) romvec->dest;					\
+									\
+	__res = __vec(__a1, __a2, __a3, __a4, __a5);			\
+	__res;								\
+})
+#endif /* both kernel and ARC either 32-bit or 64-bit */
+
+#endif /* _ASM_SGIARCS_H */
diff --git a/arch/mips/include/asm/sgidefs.h b/arch/mips/include/asm/sgidefs.h
new file mode 100644
index 0000000..876442f
--- /dev/null
+++ b/arch/mips/include/asm/sgidefs.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1999, 2001 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef __ASM_SGIDEFS_H
+#define __ASM_SGIDEFS_H
+
+/*
+ * Using a Linux compiler for building Linux seems logic but not to
+ * everybody.
+ */
+#ifndef __linux__
+#error Use a Linux compiler or give up.
+#endif
+
+/*
+ * Definitions for the ISA levels
+ *
+ * With the introduction of MIPS32 / MIPS64 instruction sets definitions
+ * MIPS ISAs are no longer subsets of each other.  Therefore comparisons
+ * on these symbols except with == may result in unexpected results and
+ * are forbidden!
+ */
+#define _MIPS_ISA_MIPS1		1
+#define _MIPS_ISA_MIPS2		2
+#define _MIPS_ISA_MIPS3		3
+#define _MIPS_ISA_MIPS4		4
+#define _MIPS_ISA_MIPS5		5
+#define _MIPS_ISA_MIPS32	6
+#define _MIPS_ISA_MIPS64	7
+
+/*
+ * Subprogram calling convention
+ */
+#define _MIPS_SIM_ABI32		1
+#define _MIPS_SIM_NABI32	2
+#define _MIPS_SIM_ABI64		3
+
+#endif /* __ASM_SGIDEFS_H */
diff --git a/arch/mips/include/asm/shmbuf.h b/arch/mips/include/asm/shmbuf.h
new file mode 100644
index 0000000..f994438
--- /dev/null
+++ b/arch/mips/include/asm/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 32-bit rsp. 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
diff --git a/arch/mips/include/asm/shmparam.h b/arch/mips/include/asm/shmparam.h
new file mode 100644
index 0000000..0929072
--- /dev/null
+++ b/arch/mips/include/asm/shmparam.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA	1
+
+#define	SHMLBA 0x40000			/* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_int.h b/arch/mips/include/asm/sibyte/bcm1480_int.h
new file mode 100644
index 0000000..6109557
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_int.h
@@ -0,0 +1,312 @@
+/*  *********************************************************************
+    *  BCM1280/BCM1480 Board Support Package
+    *
+    *  Interrupt Mapper definitions		File: bcm1480_int.h
+    *
+    *  This module contains constants for manipulating the
+    *  BCM1255/BCM1280/BCM1455/BCM1480's interrupt mapper and
+    *  definitions for the interrupt sources.
+    *
+    *  BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _BCM1480_INT_H
+#define _BCM1480_INT_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Interrupt Mapper Constants
+    ********************************************************************* */
+
+/*
+ * The interrupt mapper deals with 128-bit logical registers that are
+ * implemented as pairs of 64-bit registers, with the "low" 64 bits in
+ * a register that has an address 0x1000 higher(!) than the
+ * corresponding "high" register.
+ *
+ * For appropriate registers, bit 0 of the "high" register is a
+ * cascade bit that summarizes (as a bit-OR) the 64 bits of the "low"
+ * register.
+ */
+
+/*
+ * This entire file uses _BCM1480_ in all the symbols because it is
+ * entirely BCM1480 specific.
+ */
+
+/*
+ * Interrupt sources (Table 22)
+ */
+
+#define K_BCM1480_INT_SOURCES               128
+
+#define _BCM1480_INT_HIGH(k)   (k)
+#define _BCM1480_INT_LOW(k)    ((k)+64)
+
+#define K_BCM1480_INT_ADDR_TRAP             _BCM1480_INT_HIGH(1)
+#define K_BCM1480_INT_GPIO_0                _BCM1480_INT_HIGH(4)
+#define K_BCM1480_INT_GPIO_1                _BCM1480_INT_HIGH(5)
+#define K_BCM1480_INT_GPIO_2                _BCM1480_INT_HIGH(6)
+#define K_BCM1480_INT_GPIO_3                _BCM1480_INT_HIGH(7)
+#define K_BCM1480_INT_PCI_INTA              _BCM1480_INT_HIGH(8)
+#define K_BCM1480_INT_PCI_INTB              _BCM1480_INT_HIGH(9)
+#define K_BCM1480_INT_PCI_INTC              _BCM1480_INT_HIGH(10)
+#define K_BCM1480_INT_PCI_INTD              _BCM1480_INT_HIGH(11)
+#define K_BCM1480_INT_CYCLE_CP0             _BCM1480_INT_HIGH(12)
+#define K_BCM1480_INT_CYCLE_CP1             _BCM1480_INT_HIGH(13)
+#define K_BCM1480_INT_CYCLE_CP2             _BCM1480_INT_HIGH(14)
+#define K_BCM1480_INT_CYCLE_CP3             _BCM1480_INT_HIGH(15)
+#define K_BCM1480_INT_TIMER_0               _BCM1480_INT_HIGH(20)
+#define K_BCM1480_INT_TIMER_1               _BCM1480_INT_HIGH(21)
+#define K_BCM1480_INT_TIMER_2               _BCM1480_INT_HIGH(22)
+#define K_BCM1480_INT_TIMER_3               _BCM1480_INT_HIGH(23)
+#define K_BCM1480_INT_DM_CH_0               _BCM1480_INT_HIGH(28)
+#define K_BCM1480_INT_DM_CH_1               _BCM1480_INT_HIGH(29)
+#define K_BCM1480_INT_DM_CH_2               _BCM1480_INT_HIGH(30)
+#define K_BCM1480_INT_DM_CH_3               _BCM1480_INT_HIGH(31)
+#define K_BCM1480_INT_MAC_0                 _BCM1480_INT_HIGH(36)
+#define K_BCM1480_INT_MAC_0_CH1             _BCM1480_INT_HIGH(37)
+#define K_BCM1480_INT_MAC_1                 _BCM1480_INT_HIGH(38)
+#define K_BCM1480_INT_MAC_1_CH1             _BCM1480_INT_HIGH(39)
+#define K_BCM1480_INT_MAC_2                 _BCM1480_INT_HIGH(40)
+#define K_BCM1480_INT_MAC_2_CH1             _BCM1480_INT_HIGH(41)
+#define K_BCM1480_INT_MAC_3                 _BCM1480_INT_HIGH(42)
+#define K_BCM1480_INT_MAC_3_CH1             _BCM1480_INT_HIGH(43)
+#define K_BCM1480_INT_PMI_LOW               _BCM1480_INT_HIGH(52)
+#define K_BCM1480_INT_PMI_HIGH              _BCM1480_INT_HIGH(53)
+#define K_BCM1480_INT_PMO_LOW               _BCM1480_INT_HIGH(54)
+#define K_BCM1480_INT_PMO_HIGH              _BCM1480_INT_HIGH(55)
+#define K_BCM1480_INT_MBOX_0_0              _BCM1480_INT_HIGH(56)
+#define K_BCM1480_INT_MBOX_0_1              _BCM1480_INT_HIGH(57)
+#define K_BCM1480_INT_MBOX_0_2              _BCM1480_INT_HIGH(58)
+#define K_BCM1480_INT_MBOX_0_3              _BCM1480_INT_HIGH(59)
+#define K_BCM1480_INT_MBOX_1_0              _BCM1480_INT_HIGH(60)
+#define K_BCM1480_INT_MBOX_1_1              _BCM1480_INT_HIGH(61)
+#define K_BCM1480_INT_MBOX_1_2              _BCM1480_INT_HIGH(62)
+#define K_BCM1480_INT_MBOX_1_3              _BCM1480_INT_HIGH(63)
+
+#define K_BCM1480_INT_BAD_ECC               _BCM1480_INT_LOW(1)
+#define K_BCM1480_INT_COR_ECC               _BCM1480_INT_LOW(2)
+#define K_BCM1480_INT_IO_BUS                _BCM1480_INT_LOW(3)
+#define K_BCM1480_INT_PERF_CNT              _BCM1480_INT_LOW(4)
+#define K_BCM1480_INT_SW_PERF_CNT           _BCM1480_INT_LOW(5)
+#define K_BCM1480_INT_TRACE_FREEZE          _BCM1480_INT_LOW(6)
+#define K_BCM1480_INT_SW_TRACE_FREEZE       _BCM1480_INT_LOW(7)
+#define K_BCM1480_INT_WATCHDOG_TIMER_0      _BCM1480_INT_LOW(8)
+#define K_BCM1480_INT_WATCHDOG_TIMER_1      _BCM1480_INT_LOW(9)
+#define K_BCM1480_INT_WATCHDOG_TIMER_2      _BCM1480_INT_LOW(10)
+#define K_BCM1480_INT_WATCHDOG_TIMER_3      _BCM1480_INT_LOW(11)
+#define K_BCM1480_INT_PCI_ERROR             _BCM1480_INT_LOW(16)
+#define K_BCM1480_INT_PCI_RESET             _BCM1480_INT_LOW(17)
+#define K_BCM1480_INT_NODE_CONTROLLER       _BCM1480_INT_LOW(18)
+#define K_BCM1480_INT_HOST_BRIDGE           _BCM1480_INT_LOW(19)
+#define K_BCM1480_INT_PORT_0_FATAL          _BCM1480_INT_LOW(20)
+#define K_BCM1480_INT_PORT_0_NONFATAL       _BCM1480_INT_LOW(21)
+#define K_BCM1480_INT_PORT_1_FATAL          _BCM1480_INT_LOW(22)
+#define K_BCM1480_INT_PORT_1_NONFATAL       _BCM1480_INT_LOW(23)
+#define K_BCM1480_INT_PORT_2_FATAL          _BCM1480_INT_LOW(24)
+#define K_BCM1480_INT_PORT_2_NONFATAL       _BCM1480_INT_LOW(25)
+#define K_BCM1480_INT_LDT_SMI               _BCM1480_INT_LOW(32)
+#define K_BCM1480_INT_LDT_NMI               _BCM1480_INT_LOW(33)
+#define K_BCM1480_INT_LDT_INIT              _BCM1480_INT_LOW(34)
+#define K_BCM1480_INT_LDT_STARTUP           _BCM1480_INT_LOW(35)
+#define K_BCM1480_INT_LDT_EXT               _BCM1480_INT_LOW(36)
+#define K_BCM1480_INT_SMB_0                 _BCM1480_INT_LOW(40)
+#define K_BCM1480_INT_SMB_1                 _BCM1480_INT_LOW(41)
+#define K_BCM1480_INT_PCMCIA                _BCM1480_INT_LOW(42)
+#define K_BCM1480_INT_UART_0                _BCM1480_INT_LOW(44)
+#define K_BCM1480_INT_UART_1                _BCM1480_INT_LOW(45)
+#define K_BCM1480_INT_UART_2                _BCM1480_INT_LOW(46)
+#define K_BCM1480_INT_UART_3                _BCM1480_INT_LOW(47)
+#define K_BCM1480_INT_GPIO_4                _BCM1480_INT_LOW(52)
+#define K_BCM1480_INT_GPIO_5                _BCM1480_INT_LOW(53)
+#define K_BCM1480_INT_GPIO_6                _BCM1480_INT_LOW(54)
+#define K_BCM1480_INT_GPIO_7                _BCM1480_INT_LOW(55)
+#define K_BCM1480_INT_GPIO_8                _BCM1480_INT_LOW(56)
+#define K_BCM1480_INT_GPIO_9                _BCM1480_INT_LOW(57)
+#define K_BCM1480_INT_GPIO_10               _BCM1480_INT_LOW(58)
+#define K_BCM1480_INT_GPIO_11               _BCM1480_INT_LOW(59)
+#define K_BCM1480_INT_GPIO_12               _BCM1480_INT_LOW(60)
+#define K_BCM1480_INT_GPIO_13               _BCM1480_INT_LOW(61)
+#define K_BCM1480_INT_GPIO_14               _BCM1480_INT_LOW(62)
+#define K_BCM1480_INT_GPIO_15               _BCM1480_INT_LOW(63)
+
+/*
+ * Mask values for each interrupt
+ */
+
+#define _BCM1480_INT_MASK(w, n)              _SB_MAKEMASK(w, ((n) & 0x3F))
+#define _BCM1480_INT_MASK1(n)               _SB_MAKEMASK1(((n) & 0x3F))
+#define _BCM1480_INT_OFFSET(n)              (((n) & 0x40) << 6)
+
+#define M_BCM1480_INT_CASCADE               _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0))
+
+#define M_BCM1480_INT_ADDR_TRAP             _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP)
+#define M_BCM1480_INT_GPIO_0                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0)
+#define M_BCM1480_INT_GPIO_1                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1)
+#define M_BCM1480_INT_GPIO_2                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2)
+#define M_BCM1480_INT_GPIO_3                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3)
+#define M_BCM1480_INT_PCI_INTA              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA)
+#define M_BCM1480_INT_PCI_INTB              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB)
+#define M_BCM1480_INT_PCI_INTC              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC)
+#define M_BCM1480_INT_PCI_INTD              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD)
+#define M_BCM1480_INT_CYCLE_CP0             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0)
+#define M_BCM1480_INT_CYCLE_CP1             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1)
+#define M_BCM1480_INT_CYCLE_CP2             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2)
+#define M_BCM1480_INT_CYCLE_CP3             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3)
+#define M_BCM1480_INT_TIMER_0               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0)
+#define M_BCM1480_INT_TIMER_1               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1)
+#define M_BCM1480_INT_TIMER_2               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2)
+#define M_BCM1480_INT_TIMER_3               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3)
+#define M_BCM1480_INT_DM_CH_0               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0)
+#define M_BCM1480_INT_DM_CH_1               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1)
+#define M_BCM1480_INT_DM_CH_2               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2)
+#define M_BCM1480_INT_DM_CH_3               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3)
+#define M_BCM1480_INT_MAC_0                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0)
+#define M_BCM1480_INT_MAC_0_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1)
+#define M_BCM1480_INT_MAC_1                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1)
+#define M_BCM1480_INT_MAC_1_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1)
+#define M_BCM1480_INT_MAC_2                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2)
+#define M_BCM1480_INT_MAC_2_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1)
+#define M_BCM1480_INT_MAC_3                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3)
+#define M_BCM1480_INT_MAC_3_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1)
+#define M_BCM1480_INT_PMI_LOW               _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW)
+#define M_BCM1480_INT_PMI_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
+#define M_BCM1480_INT_PMO_LOW               _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
+#define M_BCM1480_INT_PMO_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
+#define M_BCM1480_INT_MBOX_ALL              _BCM1480_INT_MASK(8, K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_0              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_1              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
+#define M_BCM1480_INT_MBOX_0_2              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)
+#define M_BCM1480_INT_MBOX_0_3              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3)
+#define M_BCM1480_INT_MBOX_1_0              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0)
+#define M_BCM1480_INT_MBOX_1_1              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1)
+#define M_BCM1480_INT_MBOX_1_2              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2)
+#define M_BCM1480_INT_MBOX_1_3              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3)
+#define M_BCM1480_INT_BAD_ECC               _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC)
+#define M_BCM1480_INT_COR_ECC               _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC)
+#define M_BCM1480_INT_IO_BUS                _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS)
+#define M_BCM1480_INT_PERF_CNT              _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT)
+#define M_BCM1480_INT_SW_PERF_CNT           _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT)
+#define M_BCM1480_INT_TRACE_FREEZE          _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE)
+#define M_BCM1480_INT_SW_TRACE_FREEZE       _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE)
+#define M_BCM1480_INT_WATCHDOG_TIMER_0      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0)
+#define M_BCM1480_INT_WATCHDOG_TIMER_1      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1)
+#define M_BCM1480_INT_WATCHDOG_TIMER_2      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2)
+#define M_BCM1480_INT_WATCHDOG_TIMER_3      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3)
+#define M_BCM1480_INT_PCI_ERROR             _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR)
+#define M_BCM1480_INT_PCI_RESET             _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET)
+#define M_BCM1480_INT_NODE_CONTROLLER       _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER)
+#define M_BCM1480_INT_HOST_BRIDGE           _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE)
+#define M_BCM1480_INT_PORT_0_FATAL          _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL)
+#define M_BCM1480_INT_PORT_0_NONFATAL       _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL)
+#define M_BCM1480_INT_PORT_1_FATAL          _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL)
+#define M_BCM1480_INT_PORT_1_NONFATAL       _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL)
+#define M_BCM1480_INT_PORT_2_FATAL          _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL)
+#define M_BCM1480_INT_PORT_2_NONFATAL       _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL)
+#define M_BCM1480_INT_LDT_SMI               _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI)
+#define M_BCM1480_INT_LDT_NMI               _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI)
+#define M_BCM1480_INT_LDT_INIT              _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT)
+#define M_BCM1480_INT_LDT_STARTUP           _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP)
+#define M_BCM1480_INT_LDT_EXT               _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT)
+#define M_BCM1480_INT_SMB_0                 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0)
+#define M_BCM1480_INT_SMB_1                 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1)
+#define M_BCM1480_INT_PCMCIA                _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA)
+#define M_BCM1480_INT_UART_0                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0)
+#define M_BCM1480_INT_UART_1                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1)
+#define M_BCM1480_INT_UART_2                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2)
+#define M_BCM1480_INT_UART_3                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3)
+#define M_BCM1480_INT_GPIO_4                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4)
+#define M_BCM1480_INT_GPIO_5                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5)
+#define M_BCM1480_INT_GPIO_6                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6)
+#define M_BCM1480_INT_GPIO_7                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7)
+#define M_BCM1480_INT_GPIO_8                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8)
+#define M_BCM1480_INT_GPIO_9                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9)
+#define M_BCM1480_INT_GPIO_10               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10)
+#define M_BCM1480_INT_GPIO_11               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11)
+#define M_BCM1480_INT_GPIO_12               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12)
+#define M_BCM1480_INT_GPIO_13               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13)
+#define M_BCM1480_INT_GPIO_14               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14)
+#define M_BCM1480_INT_GPIO_15               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15)
+
+/*
+ * Interrupt mappings (Table 18)
+ */
+
+#define K_BCM1480_INT_MAP_I0    0		/* interrupt pins on processor */
+#define K_BCM1480_INT_MAP_I1    1
+#define K_BCM1480_INT_MAP_I2    2
+#define K_BCM1480_INT_MAP_I3    3
+#define K_BCM1480_INT_MAP_I4    4
+#define K_BCM1480_INT_MAP_I5    5
+#define K_BCM1480_INT_MAP_NMI   6		/* nonmaskable */
+#define K_BCM1480_INT_MAP_DINT  7		/* debug interrupt */
+
+/*
+ * Interrupt LDT Set Register (Table 19)
+ */
+
+#define S_BCM1480_INT_HT_INTMSG             0
+#define M_BCM1480_INT_HT_INTMSG             _SB_MAKEMASK(3, S_BCM1480_INT_HT_INTMSG)
+#define V_BCM1480_INT_HT_INTMSG(x)          _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTMSG)
+#define G_BCM1480_INT_HT_INTMSG(x)          _SB_GETVALUE(x, S_BCM1480_INT_HT_INTMSG, M_BCM1480_INT_HT_INTMSG)
+
+#define K_BCM1480_INT_HT_INTMSG_FIXED       0
+#define K_BCM1480_INT_HT_INTMSG_ARBITRATED  1
+#define K_BCM1480_INT_HT_INTMSG_SMI         2
+#define K_BCM1480_INT_HT_INTMSG_NMI         3
+#define K_BCM1480_INT_HT_INTMSG_INIT        4
+#define K_BCM1480_INT_HT_INTMSG_STARTUP     5
+#define K_BCM1480_INT_HT_INTMSG_EXTINT      6
+#define K_BCM1480_INT_HT_INTMSG_RESERVED    7
+
+#define M_BCM1480_INT_HT_TRIGGERMODE        _SB_MAKEMASK1(3)
+#define V_BCM1480_INT_HT_EDGETRIGGER        0
+#define V_BCM1480_INT_HT_LEVELTRIGGER       M_BCM1480_INT_HT_TRIGGERMODE
+
+#define M_BCM1480_INT_HT_DESTMODE           _SB_MAKEMASK1(4)
+#define V_BCM1480_INT_HT_PHYSICALDEST       0
+#define V_BCM1480_INT_HT_LOGICALDEST        M_BCM1480_INT_HT_DESTMODE
+
+#define S_BCM1480_INT_HT_INTDEST            5
+#define M_BCM1480_INT_HT_INTDEST            _SB_MAKEMASK(8, S_BCM1480_INT_HT_INTDEST)
+#define V_BCM1480_INT_HT_INTDEST(x)         _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTDEST)
+#define G_BCM1480_INT_HT_INTDEST(x)         _SB_GETVALUE(x, S_BCM1480_INT_HT_INTDEST, M_BCM1480_INT_HT_INTDEST)
+
+#define S_BCM1480_INT_HT_VECTOR             13
+#define M_BCM1480_INT_HT_VECTOR             _SB_MAKEMASK(8, S_BCM1480_INT_HT_VECTOR)
+#define V_BCM1480_INT_HT_VECTOR(x)          _SB_MAKEVALUE(x, S_BCM1480_INT_HT_VECTOR)
+#define G_BCM1480_INT_HT_VECTOR(x)          _SB_GETVALUE(x, S_BCM1480_INT_HT_VECTOR, M_BCM1480_INT_HT_VECTOR)
+
+/*
+ * Vector prefix (Table 4-7)
+ */
+
+#define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH  0x00
+#define M_BCM1480_HTVECT_RAISE_MBOX_0       0x40
+#define M_BCM1480_HTVECT_RAISE_INTLDT_LO    0x80
+#define M_BCM1480_HTVECT_RAISE_MBOX_1       0xC0
+
+#endif /* _BCM1480_INT_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_l2c.h b/arch/mips/include/asm/sibyte/bcm1480_l2c.h
new file mode 100644
index 0000000..fd75817
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_l2c.h
@@ -0,0 +1,176 @@
+/*  *********************************************************************
+    *  BCM1280/BCM1480 Board Support Package
+    *
+    *  L2 Cache constants and macros		File: bcm1480_l2c.h
+    *
+    *  This module contains constants useful for manipulating the
+    *  level 2 cache.
+    *
+    *  BCM1400 specification level:  1280-UM100-D2 (11/14/03)
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _BCM1480_L2C_H
+#define _BCM1480_L2C_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Format of level 2 cache management address (Table 55)
+ */
+
+#define S_BCM1480_L2C_MGMT_INDEX            5
+#define M_BCM1480_L2C_MGMT_INDEX            _SB_MAKEMASK(12, S_BCM1480_L2C_MGMT_INDEX)
+#define V_BCM1480_L2C_MGMT_INDEX(x)         _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_INDEX)
+#define G_BCM1480_L2C_MGMT_INDEX(x)         _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_INDEX, M_BCM1480_L2C_MGMT_INDEX)
+
+#define S_BCM1480_L2C_MGMT_WAY              17
+#define M_BCM1480_L2C_MGMT_WAY              _SB_MAKEMASK(3, S_BCM1480_L2C_MGMT_WAY)
+#define V_BCM1480_L2C_MGMT_WAY(x)           _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_WAY)
+#define G_BCM1480_L2C_MGMT_WAY(x)           _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_WAY, M_BCM1480_L2C_MGMT_WAY)
+
+#define M_BCM1480_L2C_MGMT_DIRTY            _SB_MAKEMASK1(20)
+#define M_BCM1480_L2C_MGMT_VALID            _SB_MAKEMASK1(21)
+
+#define S_BCM1480_L2C_MGMT_ECC_DIAG         22
+#define M_BCM1480_L2C_MGMT_ECC_DIAG         _SB_MAKEMASK(2, S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define V_BCM1480_L2C_MGMT_ECC_DIAG(x)      _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define G_BCM1480_L2C_MGMT_ECC_DIAG(x)      _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG, M_BCM1480_L2C_MGMT_ECC_DIAG)
+
+#define A_BCM1480_L2C_MGMT_TAG_BASE         0x00D0000000
+
+#define BCM1480_L2C_ENTRIES_PER_WAY         4096
+#define BCM1480_L2C_NUM_WAYS                8
+
+
+/*
+ * Level 2 Cache Tag register (Table 59)
+ */
+
+#define S_BCM1480_L2C_TAG_MBZ               0
+#define M_BCM1480_L2C_TAG_MBZ               _SB_MAKEMASK(5, S_BCM1480_L2C_TAG_MBZ)
+
+#define S_BCM1480_L2C_TAG_INDEX             5
+#define M_BCM1480_L2C_TAG_INDEX             _SB_MAKEMASK(12, S_BCM1480_L2C_TAG_INDEX)
+#define V_BCM1480_L2C_TAG_INDEX(x)          _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_INDEX)
+#define G_BCM1480_L2C_TAG_INDEX(x)          _SB_GETVALUE(x, S_BCM1480_L2C_TAG_INDEX, M_BCM1480_L2C_TAG_INDEX)
+
+/* Note that index bit 16 is also tag bit 40 */
+#define S_BCM1480_L2C_TAG_TAG               17
+#define M_BCM1480_L2C_TAG_TAG               _SB_MAKEMASK(23, S_BCM1480_L2C_TAG_TAG)
+#define V_BCM1480_L2C_TAG_TAG(x)            _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_TAG)
+#define G_BCM1480_L2C_TAG_TAG(x)            _SB_GETVALUE(x, S_BCM1480_L2C_TAG_TAG, M_BCM1480_L2C_TAG_TAG)
+
+#define S_BCM1480_L2C_TAG_ECC               40
+#define M_BCM1480_L2C_TAG_ECC               _SB_MAKEMASK(6, S_BCM1480_L2C_TAG_ECC)
+#define V_BCM1480_L2C_TAG_ECC(x)            _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_ECC)
+#define G_BCM1480_L2C_TAG_ECC(x)            _SB_GETVALUE(x, S_BCM1480_L2C_TAG_ECC, M_BCM1480_L2C_TAG_ECC)
+
+#define S_BCM1480_L2C_TAG_WAY               46
+#define M_BCM1480_L2C_TAG_WAY               _SB_MAKEMASK(3, S_BCM1480_L2C_TAG_WAY)
+#define V_BCM1480_L2C_TAG_WAY(x)            _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_WAY)
+#define G_BCM1480_L2C_TAG_WAY(x)            _SB_GETVALUE(x, S_BCM1480_L2C_TAG_WAY, M_BCM1480_L2C_TAG_WAY)
+
+#define M_BCM1480_L2C_TAG_DIRTY             _SB_MAKEMASK1(49)
+#define M_BCM1480_L2C_TAG_VALID             _SB_MAKEMASK1(50)
+
+#define S_BCM1480_L2C_DATA_ECC              51
+#define M_BCM1480_L2C_DATA_ECC              _SB_MAKEMASK(10, S_BCM1480_L2C_DATA_ECC)
+#define V_BCM1480_L2C_DATA_ECC(x)           _SB_MAKEVALUE(x, S_BCM1480_L2C_DATA_ECC)
+#define G_BCM1480_L2C_DATA_ECC(x)           _SB_GETVALUE(x, S_BCM1480_L2C_DATA_ECC, M_BCM1480_L2C_DATA_ECC)
+
+
+/*
+ * L2 Misc0 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC0_WAY_REMOTE      0
+#define M_BCM1480_L2C_MISC0_WAY_REMOTE      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_REMOTE)
+#define G_BCM1480_L2C_MISC0_WAY_REMOTE(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_REMOTE, M_BCM1480_L2C_MISC0_WAY_REMOTE)
+
+#define S_BCM1480_L2C_MISC0_WAY_LOCAL       8
+#define M_BCM1480_L2C_MISC0_WAY_LOCAL       _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_LOCAL)
+#define G_BCM1480_L2C_MISC0_WAY_LOCAL(x)    _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_LOCAL, M_BCM1480_L2C_MISC0_WAY_LOCAL)
+
+#define S_BCM1480_L2C_MISC0_WAY_ENABLE      16
+#define M_BCM1480_L2C_MISC0_WAY_ENABLE      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_ENABLE)
+#define G_BCM1480_L2C_MISC0_WAY_ENABLE(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_ENABLE, M_BCM1480_L2C_MISC0_WAY_ENABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_DISABLE   24
+#define M_BCM1480_L2C_MISC0_CACHE_DISABLE   _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_DISABLE)
+#define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_DISABLE, M_BCM1480_L2C_MISC0_CACHE_DISABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_QUAD      26
+#define M_BCM1480_L2C_MISC0_CACHE_QUAD      _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_QUAD)
+#define G_BCM1480_L2C_MISC0_CACHE_QUAD(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_QUAD, M_BCM1480_L2C_MISC0_CACHE_QUAD)
+
+#define S_BCM1480_L2C_MISC0_MC_PRIORITY      30
+#define M_BCM1480_L2C_MISC0_MC_PRIORITY      _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY)
+
+#define S_BCM1480_L2C_MISC0_ECC_CLEANUP      31
+#define M_BCM1480_L2C_MISC0_ECC_CLEANUP      _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP)
+
+
+/*
+ * L2 Misc1 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_0      0
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_0      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_0)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_0, M_BCM1480_L2C_MISC1_WAY_AGENT_0)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_1      8
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_1      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_1)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_1, M_BCM1480_L2C_MISC1_WAY_AGENT_1)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_2      16
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_2      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_2)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_2, M_BCM1480_L2C_MISC1_WAY_AGENT_2)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_3      24
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_3      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_3)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_3, M_BCM1480_L2C_MISC1_WAY_AGENT_3)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_4      32
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_4      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_4)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_4, M_BCM1480_L2C_MISC1_WAY_AGENT_4)
+
+
+/*
+ * L2 Misc2 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_8      0
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_8      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_8)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_8, M_BCM1480_L2C_MISC2_WAY_AGENT_8)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_9      8
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_9      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_9)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_9, M_BCM1480_L2C_MISC2_WAY_AGENT_9)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_A      16
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_A      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_A)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_A, M_BCM1480_L2C_MISC2_WAY_AGENT_A)
+
+
+#endif /* _BCM1480_L2C_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_mc.h b/arch/mips/include/asm/sibyte/bcm1480_mc.h
new file mode 100644
index 0000000..f26a41a
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_mc.h
@@ -0,0 +1,984 @@
+/*  *********************************************************************
+    *  BCM1280/BCM1480 Board Support Package
+    *
+    *  Memory Controller constants              File: bcm1480_mc.h
+    *
+    *  This module contains constants and macros useful for
+    *  programming the memory controller.
+    *
+    *  BCM1400 specification level:  1280-UM100-D1 (11/14/03 Review Copy)
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _BCM1480_MC_H
+#define _BCM1480_MC_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Memory Channel Configuration Register (Table 81)
+ */
+
+#define S_BCM1480_MC_INTLV0                 0
+#define M_BCM1480_MC_INTLV0                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0_DEFAULT         V_BCM1480_MC_INTLV0(0)
+
+#define S_BCM1480_MC_INTLV1                 8
+#define M_BCM1480_MC_INTLV1                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1_DEFAULT         V_BCM1480_MC_INTLV1(0)
+
+#define S_BCM1480_MC_INTLV2                 16
+#define M_BCM1480_MC_INTLV2                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV2)
+#define G_BCM1480_MC_INTLV2(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV2, M_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2_DEFAULT         V_BCM1480_MC_INTLV2(0)
+
+#define S_BCM1480_MC_CS_MODE                32
+#define M_BCM1480_MC_CS_MODE                _SB_MAKEMASK(8, S_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS_MODE)
+#define G_BCM1480_MC_CS_MODE(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS_MODE, M_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE_DEFAULT        V_BCM1480_MC_CS_MODE(0)
+
+#define V_BCM1480_MC_CONFIG_DEFAULT         (V_BCM1480_MC_INTLV0_DEFAULT  | \
+                                     V_BCM1480_MC_INTLV1_DEFAULT  | \
+                                     V_BCM1480_MC_INTLV2_DEFAULT  | \
+				     V_BCM1480_MC_CS_MODE_DEFAULT)
+
+#define K_BCM1480_MC_CS01_MODE		    0x03
+#define K_BCM1480_MC_CS02_MODE		    0x05
+#define K_BCM1480_MC_CS0123_MODE	    0x0F
+#define K_BCM1480_MC_CS0246_MODE	    0x55
+#define K_BCM1480_MC_CS0145_MODE	    0x33
+#define K_BCM1480_MC_CS0167_MODE	    0xC3
+#define K_BCM1480_MC_CSFULL_MODE	    0xFF
+
+/*
+ * Chip Select Start Address Register (Table 82)
+ */
+
+#define S_BCM1480_MC_CS0_START              0
+#define M_BCM1480_MC_CS0_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS0_START)
+#define V_BCM1480_MC_CS0_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_START)
+#define G_BCM1480_MC_CS0_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS0_START, M_BCM1480_MC_CS0_START)
+
+#define S_BCM1480_MC_CS1_START              16
+#define M_BCM1480_MC_CS1_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS1_START)
+#define V_BCM1480_MC_CS1_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_START)
+#define G_BCM1480_MC_CS1_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS1_START, M_BCM1480_MC_CS1_START)
+
+#define S_BCM1480_MC_CS2_START              32
+#define M_BCM1480_MC_CS2_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS2_START)
+#define V_BCM1480_MC_CS2_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_START)
+#define G_BCM1480_MC_CS2_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS2_START, M_BCM1480_MC_CS2_START)
+
+#define S_BCM1480_MC_CS3_START              48
+#define M_BCM1480_MC_CS3_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS3_START)
+#define V_BCM1480_MC_CS3_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_START)
+#define G_BCM1480_MC_CS3_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS3_START, M_BCM1480_MC_CS3_START)
+
+/*
+ * Chip Select End Address Register (Table 83)
+ */
+
+#define S_BCM1480_MC_CS0_END                0
+#define M_BCM1480_MC_CS0_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS0_END)
+#define V_BCM1480_MC_CS0_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_END)
+#define G_BCM1480_MC_CS0_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS0_END, M_BCM1480_MC_CS0_END)
+
+#define S_BCM1480_MC_CS1_END                16
+#define M_BCM1480_MC_CS1_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS1_END)
+#define V_BCM1480_MC_CS1_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_END)
+#define G_BCM1480_MC_CS1_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS1_END, M_BCM1480_MC_CS1_END)
+
+#define S_BCM1480_MC_CS2_END                32
+#define M_BCM1480_MC_CS2_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS2_END)
+#define V_BCM1480_MC_CS2_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_END)
+#define G_BCM1480_MC_CS2_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS2_END, M_BCM1480_MC_CS2_END)
+
+#define S_BCM1480_MC_CS3_END                48
+#define M_BCM1480_MC_CS3_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS3_END)
+#define V_BCM1480_MC_CS3_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_END)
+#define G_BCM1480_MC_CS3_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS3_END, M_BCM1480_MC_CS3_END)
+
+/*
+ * Row Address Bit Select Register 0 (Table 84)
+ */
+
+#define S_BCM1480_MC_ROW00                  0
+#define M_BCM1480_MC_ROW00                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW00)
+#define V_BCM1480_MC_ROW00(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW00)
+#define G_BCM1480_MC_ROW00(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW00, M_BCM1480_MC_ROW00)
+
+#define S_BCM1480_MC_ROW01                  8
+#define M_BCM1480_MC_ROW01                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW01)
+#define V_BCM1480_MC_ROW01(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW01)
+#define G_BCM1480_MC_ROW01(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW01, M_BCM1480_MC_ROW01)
+
+#define S_BCM1480_MC_ROW02                  16
+#define M_BCM1480_MC_ROW02                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW02)
+#define V_BCM1480_MC_ROW02(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW02)
+#define G_BCM1480_MC_ROW02(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW02, M_BCM1480_MC_ROW02)
+
+#define S_BCM1480_MC_ROW03                  24
+#define M_BCM1480_MC_ROW03                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW03)
+#define V_BCM1480_MC_ROW03(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW03)
+#define G_BCM1480_MC_ROW03(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW03, M_BCM1480_MC_ROW03)
+
+#define S_BCM1480_MC_ROW04                  32
+#define M_BCM1480_MC_ROW04                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW04)
+#define V_BCM1480_MC_ROW04(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW04)
+#define G_BCM1480_MC_ROW04(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW04, M_BCM1480_MC_ROW04)
+
+#define S_BCM1480_MC_ROW05                  40
+#define M_BCM1480_MC_ROW05                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW05)
+#define V_BCM1480_MC_ROW05(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW05)
+#define G_BCM1480_MC_ROW05(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW05, M_BCM1480_MC_ROW05)
+
+#define S_BCM1480_MC_ROW06                  48
+#define M_BCM1480_MC_ROW06                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW06)
+#define V_BCM1480_MC_ROW06(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW06)
+#define G_BCM1480_MC_ROW06(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW06, M_BCM1480_MC_ROW06)
+
+#define S_BCM1480_MC_ROW07                  56
+#define M_BCM1480_MC_ROW07                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW07)
+#define V_BCM1480_MC_ROW07(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW07)
+#define G_BCM1480_MC_ROW07(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW07, M_BCM1480_MC_ROW07)
+
+/*
+ * Row Address Bit Select Register 1 (Table 85)
+ */
+
+#define S_BCM1480_MC_ROW08                  0
+#define M_BCM1480_MC_ROW08                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW08)
+#define V_BCM1480_MC_ROW08(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW08)
+#define G_BCM1480_MC_ROW08(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW08, M_BCM1480_MC_ROW08)
+
+#define S_BCM1480_MC_ROW09                  8
+#define M_BCM1480_MC_ROW09                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW09)
+#define V_BCM1480_MC_ROW09(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW09)
+#define G_BCM1480_MC_ROW09(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW09, M_BCM1480_MC_ROW09)
+
+#define S_BCM1480_MC_ROW10                  16
+#define M_BCM1480_MC_ROW10                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW10)
+#define V_BCM1480_MC_ROW10(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW10)
+#define G_BCM1480_MC_ROW10(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW10, M_BCM1480_MC_ROW10)
+
+#define S_BCM1480_MC_ROW11                  24
+#define M_BCM1480_MC_ROW11                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW11)
+#define V_BCM1480_MC_ROW11(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW11)
+#define G_BCM1480_MC_ROW11(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW11, M_BCM1480_MC_ROW11)
+
+#define S_BCM1480_MC_ROW12                  32
+#define M_BCM1480_MC_ROW12                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW12)
+#define V_BCM1480_MC_ROW12(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW12)
+#define G_BCM1480_MC_ROW12(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW12, M_BCM1480_MC_ROW12)
+
+#define S_BCM1480_MC_ROW13                  40
+#define M_BCM1480_MC_ROW13                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW13)
+#define V_BCM1480_MC_ROW13(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW13)
+#define G_BCM1480_MC_ROW13(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW13, M_BCM1480_MC_ROW13)
+
+#define S_BCM1480_MC_ROW14                  48
+#define M_BCM1480_MC_ROW14                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW14)
+#define V_BCM1480_MC_ROW14(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW14)
+#define G_BCM1480_MC_ROW14(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW14, M_BCM1480_MC_ROW14)
+
+#define K_BCM1480_MC_ROWX_BIT_SPACING  	    8
+
+/*
+ * Column Address Bit Select Register 0 (Table 86)
+ */
+
+#define S_BCM1480_MC_COL00                  0
+#define M_BCM1480_MC_COL00                  _SB_MAKEMASK(6, S_BCM1480_MC_COL00)
+#define V_BCM1480_MC_COL00(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL00)
+#define G_BCM1480_MC_COL00(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL00, M_BCM1480_MC_COL00)
+
+#define S_BCM1480_MC_COL01                  8
+#define M_BCM1480_MC_COL01                  _SB_MAKEMASK(6, S_BCM1480_MC_COL01)
+#define V_BCM1480_MC_COL01(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL01)
+#define G_BCM1480_MC_COL01(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL01, M_BCM1480_MC_COL01)
+
+#define S_BCM1480_MC_COL02                  16
+#define M_BCM1480_MC_COL02                  _SB_MAKEMASK(6, S_BCM1480_MC_COL02)
+#define V_BCM1480_MC_COL02(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL02)
+#define G_BCM1480_MC_COL02(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL02, M_BCM1480_MC_COL02)
+
+#define S_BCM1480_MC_COL03                  24
+#define M_BCM1480_MC_COL03                  _SB_MAKEMASK(6, S_BCM1480_MC_COL03)
+#define V_BCM1480_MC_COL03(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL03)
+#define G_BCM1480_MC_COL03(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL03, M_BCM1480_MC_COL03)
+
+#define S_BCM1480_MC_COL04                  32
+#define M_BCM1480_MC_COL04                  _SB_MAKEMASK(6, S_BCM1480_MC_COL04)
+#define V_BCM1480_MC_COL04(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL04)
+#define G_BCM1480_MC_COL04(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL04, M_BCM1480_MC_COL04)
+
+#define S_BCM1480_MC_COL05                  40
+#define M_BCM1480_MC_COL05                  _SB_MAKEMASK(6, S_BCM1480_MC_COL05)
+#define V_BCM1480_MC_COL05(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL05)
+#define G_BCM1480_MC_COL05(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL05, M_BCM1480_MC_COL05)
+
+#define S_BCM1480_MC_COL06                  48
+#define M_BCM1480_MC_COL06                  _SB_MAKEMASK(6, S_BCM1480_MC_COL06)
+#define V_BCM1480_MC_COL06(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL06)
+#define G_BCM1480_MC_COL06(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL06, M_BCM1480_MC_COL06)
+
+#define S_BCM1480_MC_COL07                  56
+#define M_BCM1480_MC_COL07                  _SB_MAKEMASK(6, S_BCM1480_MC_COL07)
+#define V_BCM1480_MC_COL07(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL07)
+#define G_BCM1480_MC_COL07(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL07, M_BCM1480_MC_COL07)
+
+/*
+ * Column Address Bit Select Register 1 (Table 87)
+ */
+
+#define S_BCM1480_MC_COL08                  0
+#define M_BCM1480_MC_COL08                  _SB_MAKEMASK(6, S_BCM1480_MC_COL08)
+#define V_BCM1480_MC_COL08(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL08)
+#define G_BCM1480_MC_COL08(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL08, M_BCM1480_MC_COL08)
+
+#define S_BCM1480_MC_COL09                  8
+#define M_BCM1480_MC_COL09                  _SB_MAKEMASK(6, S_BCM1480_MC_COL09)
+#define V_BCM1480_MC_COL09(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL09)
+#define G_BCM1480_MC_COL09(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL09, M_BCM1480_MC_COL09)
+
+#define S_BCM1480_MC_COL10                  16   /* not a valid position, must be prog as 0 */
+
+#define S_BCM1480_MC_COL11                  24
+#define M_BCM1480_MC_COL11                  _SB_MAKEMASK(6, S_BCM1480_MC_COL11)
+#define V_BCM1480_MC_COL11(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL11)
+#define G_BCM1480_MC_COL11(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL11, M_BCM1480_MC_COL11)
+
+#define S_BCM1480_MC_COL12                  32
+#define M_BCM1480_MC_COL12                  _SB_MAKEMASK(6, S_BCM1480_MC_COL12)
+#define V_BCM1480_MC_COL12(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL12)
+#define G_BCM1480_MC_COL12(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL12, M_BCM1480_MC_COL12)
+
+#define S_BCM1480_MC_COL13                  40
+#define M_BCM1480_MC_COL13                  _SB_MAKEMASK(6, S_BCM1480_MC_COL13)
+#define V_BCM1480_MC_COL13(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL13)
+#define G_BCM1480_MC_COL13(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL13, M_BCM1480_MC_COL13)
+
+#define S_BCM1480_MC_COL14                  48
+#define M_BCM1480_MC_COL14                  _SB_MAKEMASK(6, S_BCM1480_MC_COL14)
+#define V_BCM1480_MC_COL14(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL14)
+#define G_BCM1480_MC_COL14(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL14, M_BCM1480_MC_COL14)
+
+#define K_BCM1480_MC_COLX_BIT_SPACING  	    8
+
+/*
+ * CS0 and CS1 Bank Address Bit Select Register (Table 88)
+ */
+
+#define S_BCM1480_MC_CS01_BANK0             0
+#define M_BCM1480_MC_CS01_BANK0             _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK0)
+#define V_BCM1480_MC_CS01_BANK0(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK0)
+#define G_BCM1480_MC_CS01_BANK0(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK0, M_BCM1480_MC_CS01_BANK0)
+
+#define S_BCM1480_MC_CS01_BANK1             8
+#define M_BCM1480_MC_CS01_BANK1             _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK1)
+#define V_BCM1480_MC_CS01_BANK1(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK1)
+#define G_BCM1480_MC_CS01_BANK1(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK1, M_BCM1480_MC_CS01_BANK1)
+
+#define S_BCM1480_MC_CS01_BANK2             16
+#define M_BCM1480_MC_CS01_BANK2             _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK2)
+#define V_BCM1480_MC_CS01_BANK2(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK2)
+#define G_BCM1480_MC_CS01_BANK2(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK2, M_BCM1480_MC_CS01_BANK2)
+
+/*
+ * CS2 and CS3 Bank Address Bit Select Register (Table 89)
+ */
+
+#define S_BCM1480_MC_CS23_BANK0             0
+#define M_BCM1480_MC_CS23_BANK0             _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK0)
+#define V_BCM1480_MC_CS23_BANK0(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK0)
+#define G_BCM1480_MC_CS23_BANK0(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK0, M_BCM1480_MC_CS23_BANK0)
+
+#define S_BCM1480_MC_CS23_BANK1             8
+#define M_BCM1480_MC_CS23_BANK1             _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK1)
+#define V_BCM1480_MC_CS23_BANK1(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK1)
+#define G_BCM1480_MC_CS23_BANK1(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK1, M_BCM1480_MC_CS23_BANK1)
+
+#define S_BCM1480_MC_CS23_BANK2             16
+#define M_BCM1480_MC_CS23_BANK2             _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK2)
+#define V_BCM1480_MC_CS23_BANK2(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK2)
+#define G_BCM1480_MC_CS23_BANK2(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK2, M_BCM1480_MC_CS23_BANK2)
+
+#define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING  8
+
+/*
+ * DRAM Command Register (Table 90)
+ */
+
+#define S_BCM1480_MC_COMMAND                0
+#define M_BCM1480_MC_COMMAND                _SB_MAKEMASK(4, S_BCM1480_MC_COMMAND)
+#define V_BCM1480_MC_COMMAND(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_COMMAND)
+#define G_BCM1480_MC_COMMAND(x)             _SB_GETVALUE(x, S_BCM1480_MC_COMMAND, M_BCM1480_MC_COMMAND)
+
+#define K_BCM1480_MC_COMMAND_EMRS           0
+#define K_BCM1480_MC_COMMAND_MRS            1
+#define K_BCM1480_MC_COMMAND_PRE            2
+#define K_BCM1480_MC_COMMAND_AR             3
+#define K_BCM1480_MC_COMMAND_SETRFSH        4
+#define K_BCM1480_MC_COMMAND_CLRRFSH        5
+#define K_BCM1480_MC_COMMAND_SETPWRDN       6
+#define K_BCM1480_MC_COMMAND_CLRPWRDN       7
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_COMMAND_EMRS2	    8
+#define K_BCM1480_MC_COMMAND_EMRS3	    9
+#define K_BCM1480_MC_COMMAND_ENABLE_MCLK    10
+#define K_BCM1480_MC_COMMAND_DISABLE_MCLK   11
+#endif
+
+#define V_BCM1480_MC_COMMAND_EMRS           V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS)
+#define V_BCM1480_MC_COMMAND_MRS            V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS)
+#define V_BCM1480_MC_COMMAND_PRE            V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE)
+#define V_BCM1480_MC_COMMAND_AR             V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR)
+#define V_BCM1480_MC_COMMAND_SETRFSH        V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH)
+#define V_BCM1480_MC_COMMAND_CLRRFSH        V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH)
+#define V_BCM1480_MC_COMMAND_SETPWRDN       V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN)
+#define V_BCM1480_MC_COMMAND_CLRPWRDN       V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_COMMAND_EMRS2          V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2)
+#define V_BCM1480_MC_COMMAND_EMRS3          V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3)
+#define V_BCM1480_MC_COMMAND_ENABLE_MCLK    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK)
+#define V_BCM1480_MC_COMMAND_DISABLE_MCLK   V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK)
+#endif
+
+#define S_BCM1480_MC_CS0		    4
+#define M_BCM1480_MC_CS0                    _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_CS1                    _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_CS2                    _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_CS3                    _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_CS4                    _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_CS5                    _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_CS6                    _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_CS7                    _SB_MAKEMASK1(11)
+
+#define M_BCM1480_MC_CS                  _SB_MAKEMASK(8, S_BCM1480_MC_CS0)
+#define V_BCM1480_MC_CS(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_CS0)
+#define G_BCM1480_MC_CS(x)               _SB_GETVALUE(x, S_BCM1480_MC_CS0, M_BCM1480_MC_CS0)
+
+#define M_BCM1480_MC_CMD_ACTIVE             _SB_MAKEMASK1(16)
+
+/*
+ * DRAM Mode Register (Table 91)
+ */
+
+#define S_BCM1480_MC_EMODE                  0
+#define M_BCM1480_MC_EMODE                  _SB_MAKEMASK(15, S_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_EMODE)
+#define G_BCM1480_MC_EMODE(x)               _SB_GETVALUE(x, S_BCM1480_MC_EMODE, M_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE_DEFAULT          V_BCM1480_MC_EMODE(0)
+
+#define S_BCM1480_MC_MODE                   16
+#define M_BCM1480_MC_MODE                   _SB_MAKEMASK(15, S_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_MODE)
+#define G_BCM1480_MC_MODE(x)                _SB_GETVALUE(x, S_BCM1480_MC_MODE, M_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE_DEFAULT           V_BCM1480_MC_MODE(0)
+
+#define S_BCM1480_MC_DRAM_TYPE              32
+#define M_BCM1480_MC_DRAM_TYPE              _SB_MAKEMASK(4, S_BCM1480_MC_DRAM_TYPE)
+#define V_BCM1480_MC_DRAM_TYPE(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_DRAM_TYPE)
+#define G_BCM1480_MC_DRAM_TYPE(x)           _SB_GETVALUE(x, S_BCM1480_MC_DRAM_TYPE, M_BCM1480_MC_DRAM_TYPE)
+
+#define K_BCM1480_MC_DRAM_TYPE_JEDEC        0
+#define K_BCM1480_MC_DRAM_TYPE_FCRAM        1
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_DRAM_TYPE_DDR2	    2
+#endif
+
+#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1   0
+
+#define V_BCM1480_MC_DRAM_TYPE_JEDEC        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
+#define V_BCM1480_MC_DRAM_TYPE_FCRAM        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_DRAM_TYPE_DDR2	    V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2)
+#endif
+
+#define M_BCM1480_MC_GANGED                 _SB_MAKEMASK1(36)
+#define M_BCM1480_MC_BY9_INTF               _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_FORCE_ECC64            _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_ECC_DISABLE            _SB_MAKEMASK1(39)
+
+#define S_BCM1480_MC_PG_POLICY              40
+#define M_BCM1480_MC_PG_POLICY              _SB_MAKEMASK(2, S_BCM1480_MC_PG_POLICY)
+#define V_BCM1480_MC_PG_POLICY(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_PG_POLICY)
+#define G_BCM1480_MC_PG_POLICY(x)           _SB_GETVALUE(x, S_BCM1480_MC_PG_POLICY, M_BCM1480_MC_PG_POLICY)
+
+#define K_BCM1480_MC_PG_POLICY_CLOSED       0
+#define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1
+
+#define V_BCM1480_MC_PG_POLICY_CLOSED       V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED)
+#define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_2T_CMD		    _SB_MAKEMASK1(42)
+#define M_BCM1480_MC_ECC_COR_DIS	    _SB_MAKEMASK1(43)
+#endif
+
+#define V_BCM1480_MC_DRAMMODE_DEFAULT	V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \
+                                V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+/*
+ * Memory Clock Configuration Register (Table 92)
+ */
+
+#define S_BCM1480_MC_CLK_RATIO              0
+#define M_BCM1480_MC_CLK_RATIO              _SB_MAKEMASK(6, S_BCM1480_MC_CLK_RATIO)
+#define V_BCM1480_MC_CLK_RATIO(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CLK_RATIO)
+#define G_BCM1480_MC_CLK_RATIO(x)           _SB_GETVALUE(x, S_BCM1480_MC_CLK_RATIO, M_BCM1480_MC_CLK_RATIO)
+
+#define V_BCM1480_MC_CLK_RATIO_DEFAULT      V_BCM1480_MC_CLK_RATIO(10)
+
+#define S_BCM1480_MC_REF_RATE               8
+#define M_BCM1480_MC_REF_RATE               _SB_MAKEMASK(8, S_BCM1480_MC_REF_RATE)
+#define V_BCM1480_MC_REF_RATE(x)            _SB_MAKEVALUE(x, S_BCM1480_MC_REF_RATE)
+#define G_BCM1480_MC_REF_RATE(x)            _SB_GETVALUE(x, S_BCM1480_MC_REF_RATE, M_BCM1480_MC_REF_RATE)
+
+#define K_BCM1480_MC_REF_RATE_100MHz        0x31
+#define K_BCM1480_MC_REF_RATE_200MHz        0x62
+#define K_BCM1480_MC_REF_RATE_400MHz        0xC4
+
+#define V_BCM1480_MC_REF_RATE_100MHz        V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz)
+#define V_BCM1480_MC_REF_RATE_200MHz        V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz)
+#define V_BCM1480_MC_REF_RATE_400MHz        V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz)
+#define V_BCM1480_MC_REF_RATE_DEFAULT       V_BCM1480_MC_REF_RATE_400MHz
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_AUTO_REF_DIS	    _SB_MAKEMASK1(16)
+#endif
+
+/*
+ * ODT Register (Table 99)
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_RD_ODT0_CS0	    _SB_MAKEMASK1(0)
+#define M_BCM1480_MC_RD_ODT0_CS2	    _SB_MAKEMASK1(1)
+#define M_BCM1480_MC_RD_ODT0_CS4	    _SB_MAKEMASK1(2)
+#define M_BCM1480_MC_RD_ODT0_CS6	    _SB_MAKEMASK1(3)
+#define M_BCM1480_MC_WR_ODT0_CS0	    _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_WR_ODT0_CS2	    _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_WR_ODT0_CS4	    _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_WR_ODT0_CS6	    _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_RD_ODT2_CS0	    _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RD_ODT2_CS2	    _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_RD_ODT2_CS4	    _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_RD_ODT2_CS6	    _SB_MAKEMASK1(11)
+#define M_BCM1480_MC_WR_ODT2_CS0	    _SB_MAKEMASK1(12)
+#define M_BCM1480_MC_WR_ODT2_CS2	    _SB_MAKEMASK1(13)
+#define M_BCM1480_MC_WR_ODT2_CS4	    _SB_MAKEMASK1(14)
+#define M_BCM1480_MC_WR_ODT2_CS6	    _SB_MAKEMASK1(15)
+#define M_BCM1480_MC_RD_ODT4_CS0	    _SB_MAKEMASK1(16)
+#define M_BCM1480_MC_RD_ODT4_CS2	    _SB_MAKEMASK1(17)
+#define M_BCM1480_MC_RD_ODT4_CS4	    _SB_MAKEMASK1(18)
+#define M_BCM1480_MC_RD_ODT4_CS6	    _SB_MAKEMASK1(19)
+#define M_BCM1480_MC_WR_ODT4_CS0	    _SB_MAKEMASK1(20)
+#define M_BCM1480_MC_WR_ODT4_CS2	    _SB_MAKEMASK1(21)
+#define M_BCM1480_MC_WR_ODT4_CS4	    _SB_MAKEMASK1(22)
+#define M_BCM1480_MC_WR_ODT4_CS6	    _SB_MAKEMASK1(23)
+#define M_BCM1480_MC_RD_ODT6_CS0	    _SB_MAKEMASK1(24)
+#define M_BCM1480_MC_RD_ODT6_CS2	    _SB_MAKEMASK1(25)
+#define M_BCM1480_MC_RD_ODT6_CS4	    _SB_MAKEMASK1(26)
+#define M_BCM1480_MC_RD_ODT6_CS6	    _SB_MAKEMASK1(27)
+#define M_BCM1480_MC_WR_ODT6_CS0	    _SB_MAKEMASK1(28)
+#define M_BCM1480_MC_WR_ODT6_CS2	    _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_WR_ODT6_CS4	    _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_WR_ODT6_CS6	    _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CS_ODD_ODT_EN	    _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_ODT0	            0
+#define M_BCM1480_MC_ODT0		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT0)
+#define V_BCM1480_MC_ODT0(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT0)
+
+#define S_BCM1480_MC_ODT2	            8
+#define M_BCM1480_MC_ODT2		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT2)
+#define V_BCM1480_MC_ODT2(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT2)
+
+#define S_BCM1480_MC_ODT4	            16
+#define M_BCM1480_MC_ODT4		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT4)
+#define V_BCM1480_MC_ODT4(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT4)
+
+#define S_BCM1480_MC_ODT6	            24
+#define M_BCM1480_MC_ODT6		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT6)
+#define V_BCM1480_MC_ODT6(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT6)
+#endif
+
+/*
+ * Memory DLL Configuration Register (Table 93)
+ */
+
+#define S_BCM1480_MC_ADDR_COARSE_ADJ         0
+#define M_BCM1480_MC_ADDR_COARSE_ADJ         _SB_MAKEMASK(6, S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define G_BCM1480_MC_ADDR_COARSE_ADJ(x)      _SB_GETVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ, M_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_ADDR_FREQ_RANGE	    	8
+#define M_BCM1480_MC_ADDR_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define G_BCM1480_MC_ADDR_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE, M_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_ADDR_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_ADDR_FINE_ADJ          8
+#define M_BCM1480_MC_ADDR_FINE_ADJ          _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ)
+#define G_BCM1480_MC_ADDR_FINE_ADJ(x)       _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ, M_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT  V_BCM1480_MC_ADDR_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQI_COARSE_ADJ         16
+#define M_BCM1480_MC_DQI_COARSE_ADJ         _SB_MAKEMASK(6, S_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ)
+#define G_BCM1480_MC_DQI_COARSE_ADJ(x)      _SB_GETVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ, M_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQI_FREQ_RANGE	    	24
+#define M_BCM1480_MC_DQI_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE)
+#define G_BCM1480_MC_DQI_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE, M_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_DQI_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQI_FINE_ADJ           24
+#define M_BCM1480_MC_DQI_FINE_ADJ           _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ)
+#define G_BCM1480_MC_DQI_FINE_ADJ(x)        _SB_GETVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ, M_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT   V_BCM1480_MC_DQI_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQO_COARSE_ADJ         32
+#define M_BCM1480_MC_DQO_COARSE_ADJ         _SB_MAKEMASK(6, S_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ)
+#define G_BCM1480_MC_DQO_COARSE_ADJ(x)      _SB_GETVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ, M_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQO_FREQ_RANGE	    	40
+#define M_BCM1480_MC_DQO_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE)
+#define G_BCM1480_MC_DQO_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE, M_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_DQO_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQO_FINE_ADJ           40
+#define M_BCM1480_MC_DQO_FINE_ADJ           _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ)
+#define G_BCM1480_MC_DQO_FINE_ADJ(x)        _SB_GETVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ, M_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT   V_BCM1480_MC_DQO_FINE_ADJ(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_PDSEL            44
+#define M_BCM1480_MC_DLL_PDSEL            _SB_MAKEMASK(2, S_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_PDSEL(x)         _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_PDSEL)
+#define G_BCM1480_MC_DLL_PDSEL(x)         _SB_GETVALUE(x, S_BCM1480_MC_DLL_PDSEL, M_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_DEFAULT_PDSEL    V_BCM1480_MC_DLL_PDSEL(0x0)
+
+#define	M_BCM1480_MC_DLL_REGBYPASS        _SB_MAKEMASK1(46)
+#define	M_BCM1480_MC_DQO_SHIFT            _SB_MAKEMASK1(47)
+#endif
+
+#define S_BCM1480_MC_DLL_DEFAULT           48
+#define M_BCM1480_MC_DLL_DEFAULT           _SB_MAKEMASK(6, S_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_DEFAULT)
+#define G_BCM1480_MC_DLL_DEFAULT(x)        _SB_GETVALUE(x, S_BCM1480_MC_DLL_DEFAULT, M_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT   V_BCM1480_MC_DLL_DEFAULT(0x10)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_REGCTRL	  54
+#define M_BCM1480_MC_DLL_REGCTRL       	  _SB_MAKEMASK(2, S_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_REGCTRL(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_REGCTRL)
+#define G_BCM1480_MC_DLL_REGCTRL(x)       _SB_GETVALUE(x, S_BCM1480_MC_DLL_REGCTRL, M_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_REGCTRL  V_BCM1480_MC_DLL_REGCTRL(0x0)
+#endif
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_FREQ_RANGE	    	56
+#define M_BCM1480_MC_DLL_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE)
+#define G_BCM1480_MC_DLL_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE, M_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_DLL_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DLL_STEP_SIZE          56
+#define M_BCM1480_MC_DLL_STEP_SIZE          _SB_MAKEMASK(4, S_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE)
+#define G_BCM1480_MC_DLL_STEP_SIZE(x)       _SB_GETVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE, M_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT  V_BCM1480_MC_DLL_STEP_SIZE(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_BGCTRL	  60
+#define M_BCM1480_MC_DLL_BGCTRL       	  _SB_MAKEMASK(2, S_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_BGCTRL(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_BGCTRL)
+#define G_BCM1480_MC_DLL_BGCTRL(x)       _SB_GETVALUE(x, S_BCM1480_MC_DLL_BGCTRL, M_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL  V_BCM1480_MC_DLL_BGCTRL(0x0)
+#endif
+
+#define	M_BCM1480_MC_DLL_BYPASS		    _SB_MAKEMASK1(63)
+
+/*
+ * Memory Drive Configuration Register (Table 94)
+ */
+
+#define S_BCM1480_MC_RTT_BYP_PULLDOWN       0
+#define M_BCM1480_MC_RTT_BYP_PULLDOWN       _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define V_BCM1480_MC_RTT_BYP_PULLDOWN(x)    _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define G_BCM1480_MC_RTT_BYP_PULLDOWN(x)    _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN, M_BCM1480_MC_RTT_BYP_PULLDOWN)
+
+#define S_BCM1480_MC_RTT_BYP_PULLUP         6
+#define M_BCM1480_MC_RTT_BYP_PULLUP         _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLUP)
+#define V_BCM1480_MC_RTT_BYP_PULLUP(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP)
+#define G_BCM1480_MC_RTT_BYP_PULLUP(x)      _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP, M_BCM1480_MC_RTT_BYP_PULLUP)
+
+#define M_BCM1480_MC_RTT_BYPASS             _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RTT_COMP_MOV_AVG       _SB_MAKEMASK1(9)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN    10
+#define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN    _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN, M_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLUP      15
+#define M_BCM1480_MC_PVT_BYP_C1_PULLUP      _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x)   _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x)   _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP, M_BCM1480_MC_PVT_BYP_C1_PULLUP)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLDOWN    20
+#define M_BCM1480_MC_PVT_BYP_C2_PULLDOWN    _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN, M_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLUP      25
+#define M_BCM1480_MC_PVT_BYP_C2_PULLUP      _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x)   _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x)   _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP, M_BCM1480_MC_PVT_BYP_C2_PULLUP)
+
+#define M_BCM1480_MC_PVT_BYPASS             _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_PVT_COMP_MOV_AVG       _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CLK_CLASS              _SB_MAKEMASK1(34)
+#define M_BCM1480_MC_DATA_CLASS             _SB_MAKEMASK1(35)
+#define M_BCM1480_MC_ADDR_CLASS             _SB_MAKEMASK1(36)
+
+#define M_BCM1480_MC_DQ_ODT_75              _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_DQ_ODT_150             _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_DQS_ODT_75             _SB_MAKEMASK1(39)
+#define M_BCM1480_MC_DQS_ODT_150            _SB_MAKEMASK1(40)
+#define M_BCM1480_MC_DQS_DIFF               _SB_MAKEMASK1(41)
+
+/*
+ * ECC Test Data Register (Table 95)
+ */
+
+#define S_BCM1480_MC_DATA_INVERT            0
+#define M_DATA_ECC_INVERT           _SB_MAKEMASK(64, S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * ECC Test ECC Register (Table 96)
+ */
+
+#define S_BCM1480_MC_ECC_INVERT             0
+#define M_BCM1480_MC_ECC_INVERT             _SB_MAKEMASK(8, S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * SDRAM Timing Register  (Table 97)
+ */
+
+#define S_BCM1480_MC_tRCD                   0
+#define M_BCM1480_MC_tRCD                   _SB_MAKEMASK(4, S_BCM1480_MC_tRCD)
+#define V_BCM1480_MC_tRCD(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRCD)
+#define G_BCM1480_MC_tRCD(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRCD, M_BCM1480_MC_tRCD)
+#define K_BCM1480_MC_tRCD_DEFAULT           3
+#define V_BCM1480_MC_tRCD_DEFAULT           V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT)
+
+#define S_BCM1480_MC_tCL                    4
+#define M_BCM1480_MC_tCL                    _SB_MAKEMASK(4, S_BCM1480_MC_tCL)
+#define V_BCM1480_MC_tCL(x)                 _SB_MAKEVALUE(x, S_BCM1480_MC_tCL)
+#define G_BCM1480_MC_tCL(x)                 _SB_GETVALUE(x, S_BCM1480_MC_tCL, M_BCM1480_MC_tCL)
+#define K_BCM1480_MC_tCL_DEFAULT            2
+#define V_BCM1480_MC_tCL_DEFAULT            V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT)
+
+#define M_BCM1480_MC_tCrDh                  _SB_MAKEMASK1(8)
+
+#define S_BCM1480_MC_tWR                    9
+#define M_BCM1480_MC_tWR                    _SB_MAKEMASK(3, S_BCM1480_MC_tWR)
+#define V_BCM1480_MC_tWR(x)                 _SB_MAKEVALUE(x, S_BCM1480_MC_tWR)
+#define G_BCM1480_MC_tWR(x)                 _SB_GETVALUE(x, S_BCM1480_MC_tWR, M_BCM1480_MC_tWR)
+#define K_BCM1480_MC_tWR_DEFAULT            2
+#define V_BCM1480_MC_tWR_DEFAULT            V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT)
+
+#define S_BCM1480_MC_tCwD                   12
+#define M_BCM1480_MC_tCwD                   _SB_MAKEMASK(4, S_BCM1480_MC_tCwD)
+#define V_BCM1480_MC_tCwD(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tCwD)
+#define G_BCM1480_MC_tCwD(x)                _SB_GETVALUE(x, S_BCM1480_MC_tCwD, M_BCM1480_MC_tCwD)
+#define K_BCM1480_MC_tCwD_DEFAULT           1
+#define V_BCM1480_MC_tCwD_DEFAULT           V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT)
+
+#define S_BCM1480_MC_tRP                    16
+#define M_BCM1480_MC_tRP                    _SB_MAKEMASK(4, S_BCM1480_MC_tRP)
+#define V_BCM1480_MC_tRP(x)                 _SB_MAKEVALUE(x, S_BCM1480_MC_tRP)
+#define G_BCM1480_MC_tRP(x)                 _SB_GETVALUE(x, S_BCM1480_MC_tRP, M_BCM1480_MC_tRP)
+#define K_BCM1480_MC_tRP_DEFAULT            4
+#define V_BCM1480_MC_tRP_DEFAULT            V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT)
+
+#define S_BCM1480_MC_tRRD                   20
+#define M_BCM1480_MC_tRRD                   _SB_MAKEMASK(4, S_BCM1480_MC_tRRD)
+#define V_BCM1480_MC_tRRD(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRRD)
+#define G_BCM1480_MC_tRRD(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRRD, M_BCM1480_MC_tRRD)
+#define K_BCM1480_MC_tRRD_DEFAULT           2
+#define V_BCM1480_MC_tRRD_DEFAULT           V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT)
+
+#define S_BCM1480_MC_tRCw                   24
+#define M_BCM1480_MC_tRCw                   _SB_MAKEMASK(5, S_BCM1480_MC_tRCw)
+#define V_BCM1480_MC_tRCw(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRCw)
+#define G_BCM1480_MC_tRCw(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRCw, M_BCM1480_MC_tRCw)
+#define K_BCM1480_MC_tRCw_DEFAULT           10
+#define V_BCM1480_MC_tRCw_DEFAULT           V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT)
+
+#define S_BCM1480_MC_tRCr                   32
+#define M_BCM1480_MC_tRCr                   _SB_MAKEMASK(5, S_BCM1480_MC_tRCr)
+#define V_BCM1480_MC_tRCr(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRCr)
+#define G_BCM1480_MC_tRCr(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRCr, M_BCM1480_MC_tRCr)
+#define K_BCM1480_MC_tRCr_DEFAULT           9
+#define V_BCM1480_MC_tRCr_DEFAULT           V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_tFAW                   40
+#define M_BCM1480_MC_tFAW                   _SB_MAKEMASK(6, S_BCM1480_MC_tFAW)
+#define V_BCM1480_MC_tFAW(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tFAW)
+#define G_BCM1480_MC_tFAW(x)                _SB_GETVALUE(x, S_BCM1480_MC_tFAW, M_BCM1480_MC_tFAW)
+#define K_BCM1480_MC_tFAW_DEFAULT           0
+#define V_BCM1480_MC_tFAW_DEFAULT           V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT)
+#endif
+
+#define S_BCM1480_MC_tRFC                   48
+#define M_BCM1480_MC_tRFC                   _SB_MAKEMASK(7, S_BCM1480_MC_tRFC)
+#define V_BCM1480_MC_tRFC(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRFC)
+#define G_BCM1480_MC_tRFC(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRFC, M_BCM1480_MC_tRFC)
+#define K_BCM1480_MC_tRFC_DEFAULT           12
+#define V_BCM1480_MC_tRFC_DEFAULT           V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT)
+
+#define S_BCM1480_MC_tFIFO                  56
+#define M_BCM1480_MC_tFIFO                  _SB_MAKEMASK(2, S_BCM1480_MC_tFIFO)
+#define V_BCM1480_MC_tFIFO(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_tFIFO)
+#define G_BCM1480_MC_tFIFO(x)               _SB_GETVALUE(x, S_BCM1480_MC_tFIFO, M_BCM1480_MC_tFIFO)
+#define K_BCM1480_MC_tFIFO_DEFAULT          0
+#define V_BCM1480_MC_tFIFO_DEFAULT          V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT)
+
+#define S_BCM1480_MC_tW2R                  58
+#define M_BCM1480_MC_tW2R                  _SB_MAKEMASK(2, S_BCM1480_MC_tW2R)
+#define V_BCM1480_MC_tW2R(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_tW2R)
+#define G_BCM1480_MC_tW2R(x)               _SB_GETVALUE(x, S_BCM1480_MC_tW2R, M_BCM1480_MC_tW2R)
+#define K_BCM1480_MC_tW2R_DEFAULT          1
+#define V_BCM1480_MC_tW2R_DEFAULT          V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT)
+
+#define S_BCM1480_MC_tR2W                  60
+#define M_BCM1480_MC_tR2W                  _SB_MAKEMASK(2, S_BCM1480_MC_tR2W)
+#define V_BCM1480_MC_tR2W(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_tR2W)
+#define G_BCM1480_MC_tR2W(x)               _SB_GETVALUE(x, S_BCM1480_MC_tR2W, M_BCM1480_MC_tR2W)
+#define K_BCM1480_MC_tR2W_DEFAULT          0
+#define V_BCM1480_MC_tR2W_DEFAULT          V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT)
+
+#define M_BCM1480_MC_tR2R		    _SB_MAKEMASK1(62)
+
+#define V_BCM1480_MC_TIMING_DEFAULT         (M_BCM1480_MC_tR2R | \
+                                     V_BCM1480_MC_tFIFO_DEFAULT | \
+                                     V_BCM1480_MC_tR2W_DEFAULT | \
+                                     V_BCM1480_MC_tW2R_DEFAULT | \
+                                     V_BCM1480_MC_tRFC_DEFAULT | \
+                                     V_BCM1480_MC_tRCr_DEFAULT | \
+                                     V_BCM1480_MC_tRCw_DEFAULT | \
+                                     V_BCM1480_MC_tRRD_DEFAULT | \
+                                     V_BCM1480_MC_tRP_DEFAULT | \
+                                     V_BCM1480_MC_tCwD_DEFAULT | \
+                                     V_BCM1480_MC_tWR_DEFAULT | \
+                                     M_BCM1480_MC_tCrDh | \
+                                     V_BCM1480_MC_tCL_DEFAULT | \
+                                     V_BCM1480_MC_tRCD_DEFAULT)
+
+/*
+ * SDRAM Timing Register 2
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+
+#define S_BCM1480_MC_tAL                   0
+#define M_BCM1480_MC_tAL                   _SB_MAKEMASK(4, S_BCM1480_MC_tAL)
+#define V_BCM1480_MC_tAL(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tAL)
+#define G_BCM1480_MC_tAL(x)                _SB_GETVALUE(x, S_BCM1480_MC_tAL, M_BCM1480_MC_tAL)
+#define K_BCM1480_MC_tAL_DEFAULT           0
+#define V_BCM1480_MC_tAL_DEFAULT           V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT)
+
+#define S_BCM1480_MC_tRTP                   4
+#define M_BCM1480_MC_tRTP                   _SB_MAKEMASK(3, S_BCM1480_MC_tRTP)
+#define V_BCM1480_MC_tRTP(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRTP)
+#define G_BCM1480_MC_tRTP(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRTP, M_BCM1480_MC_tRTP)
+#define K_BCM1480_MC_tRTP_DEFAULT           2
+#define V_BCM1480_MC_tRTP_DEFAULT           V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT)
+
+#define S_BCM1480_MC_tW2W                   8
+#define M_BCM1480_MC_tW2W                   _SB_MAKEMASK(2, S_BCM1480_MC_tW2W)
+#define V_BCM1480_MC_tW2W(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tW2W)
+#define G_BCM1480_MC_tW2W(x)                _SB_GETVALUE(x, S_BCM1480_MC_tW2W, M_BCM1480_MC_tW2W)
+#define K_BCM1480_MC_tW2W_DEFAULT           0
+#define V_BCM1480_MC_tW2W_DEFAULT           V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT)
+
+#define S_BCM1480_MC_tRAP                   12
+#define M_BCM1480_MC_tRAP                  _SB_MAKEMASK(4, S_BCM1480_MC_tRAP)
+#define V_BCM1480_MC_tRAP(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRAP)
+#define G_BCM1480_MC_tRAP(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRAP, M_BCM1480_MC_tRAP)
+#define K_BCM1480_MC_tRAP_DEFAULT           0
+#define V_BCM1480_MC_tRAP_DEFAULT           V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT)
+
+#endif
+
+
+
+/*
+ * Global Registers: single instances per BCM1480
+ */
+
+/*
+ * Global Configuration Register (Table 99)
+ */
+
+#define S_BCM1480_MC_BLK_SET_MARK           8
+#define M_BCM1480_MC_BLK_SET_MARK           _SB_MAKEMASK(4, S_BCM1480_MC_BLK_SET_MARK)
+#define V_BCM1480_MC_BLK_SET_MARK(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_SET_MARK)
+#define G_BCM1480_MC_BLK_SET_MARK(x)        _SB_GETVALUE(x, S_BCM1480_MC_BLK_SET_MARK, M_BCM1480_MC_BLK_SET_MARK)
+
+#define S_BCM1480_MC_BLK_CLR_MARK           12
+#define M_BCM1480_MC_BLK_CLR_MARK           _SB_MAKEMASK(4, S_BCM1480_MC_BLK_CLR_MARK)
+#define V_BCM1480_MC_BLK_CLR_MARK(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_CLR_MARK)
+#define G_BCM1480_MC_BLK_CLR_MARK(x)        _SB_GETVALUE(x, S_BCM1480_MC_BLK_CLR_MARK, M_BCM1480_MC_BLK_CLR_MARK)
+
+#define M_BCM1480_MC_PKT_PRIORITY           _SB_MAKEMASK1(16)
+
+#define S_BCM1480_MC_MAX_AGE                20
+#define M_BCM1480_MC_MAX_AGE                _SB_MAKEMASK(4, S_BCM1480_MC_MAX_AGE)
+#define V_BCM1480_MC_MAX_AGE(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_MAX_AGE)
+#define G_BCM1480_MC_MAX_AGE(x)             _SB_GETVALUE(x, S_BCM1480_MC_MAX_AGE, M_BCM1480_MC_MAX_AGE)
+
+#define M_BCM1480_MC_BERR_DISABLE           _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_FORCE_SEQ              _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_VGEN                   _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_SLEW                   33
+#define M_BCM1480_MC_SLEW                   _SB_MAKEMASK(2, S_BCM1480_MC_SLEW)
+#define V_BCM1480_MC_SLEW(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_SLEW)
+#define G_BCM1480_MC_SLEW(x)                _SB_GETVALUE(x, S_BCM1480_MC_SLEW, M_BCM1480_MC_SLEW)
+
+#define M_BCM1480_MC_SSTL_VOLTAGE           _SB_MAKEMASK1(35)
+
+/*
+ * Global Channel Interleave Register (Table 100)
+ */
+
+#define S_BCM1480_MC_INTLV0                 0
+#define M_BCM1480_MC_INTLV0                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0)
+
+#define S_BCM1480_MC_INTLV1                 8
+#define M_BCM1480_MC_INTLV1                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1)
+
+#define S_BCM1480_MC_INTLV_MODE             16
+#define M_BCM1480_MC_INTLV_MODE             _SB_MAKEMASK(3, S_BCM1480_MC_INTLV_MODE)
+#define V_BCM1480_MC_INTLV_MODE(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV_MODE)
+#define G_BCM1480_MC_INTLV_MODE(x)          _SB_GETVALUE(x, S_BCM1480_MC_INTLV_MODE, M_BCM1480_MC_INTLV_MODE)
+
+#define K_BCM1480_MC_INTLV_MODE_NONE        0x0
+#define K_BCM1480_MC_INTLV_MODE_01          0x1
+#define K_BCM1480_MC_INTLV_MODE_23          0x2
+#define K_BCM1480_MC_INTLV_MODE_01_23       0x3
+#define K_BCM1480_MC_INTLV_MODE_0123        0x4
+
+#define V_BCM1480_MC_INTLV_MODE_NONE        V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE)
+#define V_BCM1480_MC_INTLV_MODE_01          V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01)
+#define V_BCM1480_MC_INTLV_MODE_23          V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23)
+#define V_BCM1480_MC_INTLV_MODE_01_23       V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23)
+#define V_BCM1480_MC_INTLV_MODE_0123        V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123)
+
+/*
+ * ECC Status Register
+ */
+
+#define S_BCM1480_MC_ECC_ERR_ADDR           0
+#define M_BCM1480_MC_ECC_ERR_ADDR           _SB_MAKEMASK(37, S_BCM1480_MC_ECC_ERR_ADDR)
+#define V_BCM1480_MC_ECC_ERR_ADDR(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR)
+#define G_BCM1480_MC_ECC_ERR_ADDR(x)        _SB_GETVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR, M_BCM1480_MC_ECC_ERR_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_ECC_ERR_RMW            _SB_MAKEMASK1(60)
+#endif
+
+#define M_BCM1480_MC_ECC_MULT_ERR_DET       _SB_MAKEMASK1(61)
+#define M_BCM1480_MC_ECC_UERR_DET           _SB_MAKEMASK1(62)
+#define M_BCM1480_MC_ECC_CERR_DET           _SB_MAKEMASK1(63)
+
+/*
+ * Global ECC Address Register (Table 102)
+ */
+
+#define S_BCM1480_MC_ECC_CORR_ADDR          0
+#define M_BCM1480_MC_ECC_CORR_ADDR          _SB_MAKEMASK(37, S_BCM1480_MC_ECC_CORR_ADDR)
+#define V_BCM1480_MC_ECC_CORR_ADDR(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR)
+#define G_BCM1480_MC_ECC_CORR_ADDR(x)       _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR, M_BCM1480_MC_ECC_CORR_ADDR)
+
+/*
+ * Global ECC Correction Register (Table 103)
+ */
+
+#define S_BCM1480_MC_ECC_CORRECT            0
+#define M_BCM1480_MC_ECC_CORRECT            _SB_MAKEMASK(64, S_BCM1480_MC_ECC_CORRECT)
+#define V_BCM1480_MC_ECC_CORRECT(x)         _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORRECT)
+#define G_BCM1480_MC_ECC_CORRECT(x)         _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORRECT, M_BCM1480_MC_ECC_CORRECT)
+
+/*
+ * Global ECC Performance Counters Control Register (Table 104)
+ */
+
+#define S_BCM1480_MC_CHANNEL_SELECT         0
+#define M_BCM1480_MC_CHANNEL_SELECT         _SB_MAKEMASK(4, S_BCM1480_MC_CHANNEL_SELECT)
+#define V_BCM1480_MC_CHANNEL_SELECT(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_CHANNEL_SELECT)
+#define G_BCM1480_MC_CHANNEL_SELECT(x)      _SB_GETVALUE(x, S_BCM1480_MC_CHANNEL_SELECT, M_BCM1480_MC_CHANNEL_SELECT)
+#define K_BCM1480_MC_CHANNEL_SELECT_0       0x1
+#define K_BCM1480_MC_CHANNEL_SELECT_1       0x2
+#define K_BCM1480_MC_CHANNEL_SELECT_2       0x4
+#define K_BCM1480_MC_CHANNEL_SELECT_3       0x8
+
+#endif /* _BCM1480_MC_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_regs.h b/arch/mips/include/asm/sibyte/bcm1480_regs.h
new file mode 100644
index 0000000..b4077bb
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_regs.h
@@ -0,0 +1,902 @@
+/*  *********************************************************************
+    *  BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package
+    *
+    *  Register Definitions                     File: bcm1480_regs.h
+    *
+    *  This module contains the addresses of the on-chip peripherals
+    *  on the BCM1280 and BCM1480.
+    *
+    *  BCM1480 specification level:  1X55_1X80-UM100-D4 (11/24/03)
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+#ifndef _BCM1480_REGS_H
+#define _BCM1480_REGS_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Pull in the BCM1250's registers since a great deal of the 1480's
+    *  functions are the same as the BCM1250.
+    ********************************************************************* */
+
+#include "sb1250_regs.h"
+
+
+/*  *********************************************************************
+    *  Some general notes:
+    *
+    *  Register addresses are grouped by function and follow the order
+    *  of the User Manual.
+    *
+    *  For the most part, when there is more than one peripheral
+    *  of the same type on the SOC, the constants below will be
+    *  offsets from the base of each peripheral.  For example,
+    *  the MAC registers are described as offsets from the first
+    *  MAC register, and there will be a MAC_REGISTER() macro
+    *  to calculate the base address of a given MAC.
+    *
+    *  The information in this file is based on the BCM1X55/BCM1X80
+    *  User Manual, Document 1X55_1X80-UM100-R, 22/12/03.
+    *
+    *  This file is basically a "what's new" header file.  Since the
+    *  BCM1250 and the new BCM1480 (and derivatives) share many common
+    *  features, this file contains only what's new or changed from
+    *  the 1250.  (above, you can see that we include the 1250 symbols
+    *  to get the base functionality).
+    *
+    *  In software, be sure to use the correct symbols, particularly
+    *  for blocks that are different between the two chip families.
+    *  All BCM1480-specific symbols have _BCM1480_ in their names,
+    *  and all BCM1250-specific and "base" functions that are common in
+    *  both chips have no special names (this is for compatibility with
+    *  older include files).  Therefore, if you're working with the
+    *  SCD, which is very different on each chip, A_SCD_xxx implies
+    *  the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+    *  version.
+    ********************************************************************* */
+
+
+/*  *********************************************************************
+    * Memory Controller Registers (Section 6)
+    ********************************************************************* */
+
+#define A_BCM1480_MC_BASE_0                 0x0010050000
+#define A_BCM1480_MC_BASE_1                 0x0010051000
+#define A_BCM1480_MC_BASE_2                 0x0010052000
+#define A_BCM1480_MC_BASE_3                 0x0010053000
+#define BCM1480_MC_REGISTER_SPACING         0x1000
+
+#define A_BCM1480_MC_BASE(ctlid)            (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING)
+#define A_BCM1480_MC_REGISTER(ctlid, reg)    (A_BCM1480_MC_BASE(ctlid)+(reg))
+
+#define R_BCM1480_MC_CONFIG                 0x0000000100
+#define R_BCM1480_MC_CS_START               0x0000000120
+#define R_BCM1480_MC_CS_END                 0x0000000140
+#define S_BCM1480_MC_CS_STARTEND            24
+
+#define R_BCM1480_MC_CS01_ROW0              0x0000000180
+#define R_BCM1480_MC_CS01_ROW1              0x00000001A0
+#define R_BCM1480_MC_CS23_ROW0              0x0000000200
+#define R_BCM1480_MC_CS23_ROW1              0x0000000220
+#define R_BCM1480_MC_CS01_COL0              0x0000000280
+#define R_BCM1480_MC_CS01_COL1              0x00000002A0
+#define R_BCM1480_MC_CS23_COL0              0x0000000300
+#define R_BCM1480_MC_CS23_COL1              0x0000000320
+
+#define R_BCM1480_MC_CSX_BASE               0x0000000180
+#define R_BCM1480_MC_CSX_ROW0               0x0000000000   /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_ROW1               0x0000000020   /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL0               0x0000000100   /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL1               0x0000000120   /* relative to CSX_BASE */
+#define BCM1480_MC_CSX_SPACING              0x0000000080   /* CS23 relative to CS01 */
+
+#define R_BCM1480_MC_CS01_BA                0x0000000380
+#define R_BCM1480_MC_CS23_BA                0x00000003A0
+#define R_BCM1480_MC_DRAMCMD                0x0000000400
+#define R_BCM1480_MC_DRAMMODE               0x0000000420
+#define R_BCM1480_MC_CLOCK_CFG              0x0000000440
+#define R_BCM1480_MC_MCLK_CFG               R_BCM1480_MC_CLOCK_CFG
+#define R_BCM1480_MC_TEST_DATA              0x0000000480
+#define R_BCM1480_MC_TEST_ECC               0x00000004A0
+#define R_BCM1480_MC_TIMING1                0x00000004C0
+#define R_BCM1480_MC_TIMING2                0x00000004E0
+#define R_BCM1480_MC_DLL_CFG                0x0000000500
+#define R_BCM1480_MC_DRIVE_CFG              0x0000000520
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define R_BCM1480_MC_ODT		    0x0000000460
+#define R_BCM1480_MC_ECC_STATUS		    0x0000000540
+#endif
+
+/* Global registers (single instance) */
+#define A_BCM1480_MC_GLB_CONFIG             0x0010054100
+#define A_BCM1480_MC_GLB_INTLV              0x0010054120
+#define A_BCM1480_MC_GLB_ECC_STATUS         0x0010054140
+#define A_BCM1480_MC_GLB_ECC_ADDR           0x0010054160
+#define A_BCM1480_MC_GLB_ECC_CORRECT        0x0010054180
+#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL   0x00100541A0
+
+/*  *********************************************************************
+    * L2 Cache Control Registers (Section 5)
+    ********************************************************************* */
+
+#define A_BCM1480_L2_BASE                   0x0010040000
+
+#define A_BCM1480_L2_READ_TAG               0x0010040018
+#define A_BCM1480_L2_ECC_TAG                0x0010040038
+#define A_BCM1480_L2_MISC0_VALUE            0x0010040058
+#define A_BCM1480_L2_MISC1_VALUE            0x0010040078
+#define A_BCM1480_L2_MISC2_VALUE            0x0010040098
+#define A_BCM1480_L2_MISC_CONFIG            0x0010040040	/* x040 */
+#define A_BCM1480_L2_CACHE_DISABLE          0x0010040060	/* x060 */
+#define A_BCM1480_L2_MAKECACHEDISABLE(x)    (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_ENABLE_3_0         0x0010040080	/* x080 */
+#define A_BCM1480_L2_WAY_ENABLE_7_4         0x00100400A0	/* x0A0 */
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x)  (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x)  (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x)  (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x)  (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_LOCAL_3_0          0x0010040100	/* x100 */
+#define A_BCM1480_L2_WAY_LOCAL_7_4          0x0010040120	/* x120 */
+#define A_BCM1480_L2_WAY_REMOTE_3_0         0x0010040140	/* x140 */
+#define A_BCM1480_L2_WAY_REMOTE_7_4         0x0010040160	/* x160 */
+#define A_BCM1480_L2_WAY_AGENT_3_0          0x00100400C0	/* xxC0 */
+#define A_BCM1480_L2_WAY_AGENT_7_4          0x00100400E0	/* xxE0 */
+#define A_BCM1480_L2_WAY_ENABLE(A, banks)   (A | (((~(banks))&0x0F) << 8))
+#define A_BCM1480_L2_BANK_BASE              0x00D0300000
+#define A_BCM1480_L2_BANK_ADDRESS(b)        (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17))
+#define A_BCM1480_L2_MGMT_TAG_BASE          0x00D0000000
+
+
+/*  *********************************************************************
+    * PCI-X Interface Registers (Section 7)
+    ********************************************************************* */
+
+#define A_BCM1480_PCI_BASE                  0x0010061400
+
+#define A_BCM1480_PCI_RESET                 0x0010061400
+#define A_BCM1480_PCI_DLL                   0x0010061500
+
+#define A_BCM1480_PCI_TYPE00_HEADER         0x002E000000
+
+/*  *********************************************************************
+    * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6)
+    ********************************************************************* */
+
+/* No register changes with Rev.C BCM1250, but one additional MAC */
+
+#define A_BCM1480_MAC_BASE_2        0x0010066000
+
+#ifndef A_MAC_BASE_2
+#define A_MAC_BASE_2                A_BCM1480_MAC_BASE_2
+#endif
+
+#define A_BCM1480_MAC_BASE_3        0x0010067000
+#define A_MAC_BASE_3                A_BCM1480_MAC_BASE_3
+
+#define R_BCM1480_MAC_DMA_OODPKTLOST        0x00000038
+
+#ifndef R_MAC_DMA_OODPKTLOST
+#define R_MAC_DMA_OODPKTLOST        R_BCM1480_MAC_DMA_OODPKTLOST
+#endif
+
+
+/*  *********************************************************************
+    * DUART Registers (Section 14)
+    ********************************************************************* */
+
+/* No significant differences from BCM1250, two DUARTs */
+
+/*  Conventions, per user manual:
+ *     DUART    generic, channels A,B,C,D
+ *     DUART0   implementing channels A,B
+ *     DUART1   inplementing channels C,D
+ */
+
+#define BCM1480_DUART_NUM_PORTS           4
+
+#define A_BCM1480_DUART0                    0x0010060000
+#define A_BCM1480_DUART1                    0x0010060400
+#define A_BCM1480_DUART(chan)               ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
+
+#define BCM1480_DUART_CHANREG_SPACING       0x100
+#define A_BCM1480_DUART_CHANREG(chan, reg)				\
+	(A_BCM1480_DUART(chan) +					\
+	 BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg))
+#define A_BCM1480_DUART_CTRLREG(chan, reg)				\
+	(A_BCM1480_DUART(chan) +					\
+	 BCM1480_DUART_CHANREG_SPACING * 3 + (reg))
+
+#define DUART_IMRISR_SPACING	    0x20
+#define DUART_INCHNG_SPACING	    0x10
+
+#define R_BCM1480_DUART_IMRREG(chan)					\
+	(R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
+#define R_BCM1480_DUART_ISRREG(chan)					\
+	(R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
+#define R_BCM1480_DUART_INCHREG(chan)					\
+	(R_DUART_IN_CHNG_A + ((chan) & 1) * DUART_INCHNG_SPACING)
+
+#define A_BCM1480_DUART_IMRREG(chan)					\
+	(A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan)))
+#define A_BCM1480_DUART_ISRREG(chan)					\
+	(A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_ISRREG(chan)))
+
+#define A_BCM1480_DUART_IN_PORT(chan)					\
+	(A_BCM1480_DUART_CTRLREG((chan), R_DUART_IN_PORT))
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_BCM1480_DUART_MODE_REG_1_C        0x0010060400
+#define A_BCM1480_DUART_MODE_REG_2_C        0x0010060410
+#define A_BCM1480_DUART_STATUS_C            0x0010060420
+#define A_BCM1480_DUART_CLK_SEL_C           0x0010060430
+#define A_BCM1480_DUART_FULL_CTL_C          0x0010060440
+#define A_BCM1480_DUART_CMD_C               0x0010060450
+#define A_BCM1480_DUART_RX_HOLD_C           0x0010060460
+#define A_BCM1480_DUART_TX_HOLD_C           0x0010060470
+#define A_BCM1480_DUART_OPCR_C              0x0010060480
+#define A_BCM1480_DUART_AUX_CTRL_C          0x0010060490
+
+#define A_BCM1480_DUART_MODE_REG_1_D        0x0010060500
+#define A_BCM1480_DUART_MODE_REG_2_D        0x0010060510
+#define A_BCM1480_DUART_STATUS_D            0x0010060520
+#define A_BCM1480_DUART_CLK_SEL_D           0x0010060530
+#define A_BCM1480_DUART_FULL_CTL_D          0x0010060540
+#define A_BCM1480_DUART_CMD_D               0x0010060550
+#define A_BCM1480_DUART_RX_HOLD_D           0x0010060560
+#define A_BCM1480_DUART_TX_HOLD_D           0x0010060570
+#define A_BCM1480_DUART_OPCR_D              0x0010060580
+#define A_BCM1480_DUART_AUX_CTRL_D          0x0010060590
+
+#define A_BCM1480_DUART_INPORT_CHNG_CD      0x0010060600
+#define A_BCM1480_DUART_AUX_CTRL_CD         0x0010060610
+#define A_BCM1480_DUART_ISR_C               0x0010060620
+#define A_BCM1480_DUART_IMR_C               0x0010060630
+#define A_BCM1480_DUART_ISR_D               0x0010060640
+#define A_BCM1480_DUART_IMR_D               0x0010060650
+#define A_BCM1480_DUART_OUT_PORT_CD         0x0010060660
+#define A_BCM1480_DUART_OPCR_CD             0x0010060670
+#define A_BCM1480_DUART_IN_PORT_CD          0x0010060680
+#define A_BCM1480_DUART_ISR_CD              0x0010060690
+#define A_BCM1480_DUART_IMR_CD              0x00100606A0
+#define A_BCM1480_DUART_SET_OPR_CD          0x00100606B0
+#define A_BCM1480_DUART_CLEAR_OPR_CD        0x00100606C0
+#define A_BCM1480_DUART_INPORT_CHNG_C       0x00100606D0
+#define A_BCM1480_DUART_INPORT_CHNG_D       0x00100606E0
+
+
+/*  *********************************************************************
+    * Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16)
+    ********************************************************************* */
+
+#define A_BCM1480_IO_PCMCIA_CFG_B	0x0010061A58
+#define A_BCM1480_IO_PCMCIA_STATUS_B	0x0010061A68
+
+/*  *********************************************************************
+    * GPIO Registers (Section 17)
+    ********************************************************************* */
+
+/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */
+
+#define A_BCM1480_GPIO_INT_ADD_TYPE         0x0010061A78
+#define R_BCM1480_GPIO_INT_ADD_TYPE         (-8)
+
+#define A_GPIO_INT_ADD_TYPE	A_BCM1480_GPIO_INT_ADD_TYPE
+#define R_GPIO_INT_ADD_TYPE	R_BCM1480_GPIO_INT_ADD_TYPE
+
+/*  *********************************************************************
+    * SMBus Registers (Section 18)
+    ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/*  *********************************************************************
+    * Timer Registers (Sections 4.6)
+    ********************************************************************* */
+
+/* BCM1480 has two additional watchdogs */
+
+/* Watchdog timers */
+
+#define A_BCM1480_SCD_WDOG_2                0x0010022050
+#define A_BCM1480_SCD_WDOG_3                0x0010022150
+
+#define BCM1480_SCD_NUM_WDOGS               4
+
+#define A_BCM1480_SCD_WDOG_BASE(w)       (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100)
+#define A_BCM1480_SCD_WDOG_REGISTER(w, r) (A_BCM1480_SCD_WDOG_BASE(w) + (r))
+
+#define A_BCM1480_SCD_WDOG_INIT_2       0x0010022050
+#define A_BCM1480_SCD_WDOG_CNT_2        0x0010022058
+#define A_BCM1480_SCD_WDOG_CFG_2        0x0010022060
+
+#define A_BCM1480_SCD_WDOG_INIT_3       0x0010022150
+#define A_BCM1480_SCD_WDOG_CNT_3        0x0010022158
+#define A_BCM1480_SCD_WDOG_CFG_3        0x0010022160
+
+/* BCM1480 has two additional compare registers */
+
+#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT		A_SCD_ZBBUS_CYCLE_COUNT
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE       0x0010020C00
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0           A_SCD_ZBBUS_CYCLE_CP0
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1           A_SCD_ZBBUS_CYCLE_CP1
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2           0x0010020C10
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3           0x0010020C18
+
+/*  *********************************************************************
+    * System Control Registers (Section 4.2)
+    ********************************************************************* */
+
+/* Scratch register in different place */
+
+#define A_BCM1480_SCD_SCRATCH	 	0x100200A0
+
+/*  *********************************************************************
+    * System Address Trap Registers (Section 4.9)
+    ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/*  *********************************************************************
+    * System Interrupt Mapper Registers (Sections 4.3-4.5)
+    ********************************************************************* */
+
+#define A_BCM1480_IMR_CPU0_BASE             0x0010020000
+#define A_BCM1480_IMR_CPU1_BASE             0x0010022000
+#define A_BCM1480_IMR_CPU2_BASE             0x0010024000
+#define A_BCM1480_IMR_CPU3_BASE             0x0010026000
+#define BCM1480_IMR_REGISTER_SPACING        0x2000
+#define BCM1480_IMR_REGISTER_SPACING_SHIFT  13
+
+#define A_BCM1480_IMR_MAPPER(cpu)       (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING)
+#define A_BCM1480_IMR_REGISTER(cpu, reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg))
+
+/* Most IMR registers are 128 bits, implemented as non-contiguous
+   64-bit registers high (_H) and low (_L) */
+#define BCM1480_IMR_HL_SPACING                  0x1000
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_H          0x0010
+#define R_BCM1480_IMR_LDT_INTERRUPT_H           0x0018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H       0x0020
+#define R_BCM1480_IMR_INTERRUPT_MASK_H          0x0028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_H         0x0038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040
+#define R_BCM1480_IMR_LDT_INTERRUPT_SET         0x0048
+#define R_BCM1480_IMR_MAILBOX_0_CPU             0x00C0
+#define R_BCM1480_IMR_MAILBOX_0_SET_CPU         0x00C8
+#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU         0x00D0
+#define R_BCM1480_IMR_MAILBOX_1_CPU             0x00E0
+#define R_BCM1480_IMR_MAILBOX_1_SET_CPU         0x00E8
+#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU         0x00F0
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H   0x0100
+#define BCM1480_IMR_INTERRUPT_STATUS_COUNT      8
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H      0x0200
+#define BCM1480_IMR_INTERRUPT_MAP_COUNT         64
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_L          0x1010
+#define R_BCM1480_IMR_LDT_INTERRUPT_L           0x1018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L       0x1020
+#define R_BCM1480_IMR_INTERRUPT_MASK_L          0x1028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_L         0x1038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L   0x1100
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L      0x1200
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE   0x0010028000
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE   0x0010028100
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE   0x0010028200
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE   0x0010028300
+#define BCM1480_IMR_ALIAS_MAILBOX_SPACING       0100
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu)     (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \
+                                        (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING)
+#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu, reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg))
+
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0           0x0000		/* 0x0x0 */
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET       0x0008		/* 0x0x8 */
+
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define R_BCM1480_IMR_MAILBOX_CPU         0x00
+#define R_BCM1480_IMR_MAILBOX_SET         0x08
+#define R_BCM1480_IMR_MAILBOX_CLR         0x10
+#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20
+#define A_BCM1480_MAILBOX_REGISTER(num, reg, cpu) \
+    (A_BCM1480_IMR_CPU0_BASE + \
+     (num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \
+     (cpu * BCM1480_IMR_REGISTER_SPACING) + \
+     (R_BCM1480_IMR_MAILBOX_0_CPU + reg))
+
+/*  *********************************************************************
+    * System Performance Counter Registers (Section 4.7)
+    ********************************************************************* */
+
+/* BCM1480 has four more performance counter registers, and two control
+   registers. */
+
+#define A_BCM1480_SCD_PERF_CNT_BASE         0x00100204C0
+
+#define A_BCM1480_SCD_PERF_CNT_CFG0         0x00100204C0
+#define A_BCM1480_SCD_PERF_CNT_CFG_0        A_BCM1480_SCD_PERF_CNT_CFG0
+#define A_BCM1480_SCD_PERF_CNT_CFG1         0x00100204C8
+#define A_BCM1480_SCD_PERF_CNT_CFG_1        A_BCM1480_SCD_PERF_CNT_CFG1
+
+#define A_BCM1480_SCD_PERF_CNT_0            A_SCD_PERF_CNT_0
+#define A_BCM1480_SCD_PERF_CNT_1            A_SCD_PERF_CNT_1
+#define A_BCM1480_SCD_PERF_CNT_2            A_SCD_PERF_CNT_2
+#define A_BCM1480_SCD_PERF_CNT_3            A_SCD_PERF_CNT_3
+
+#define A_BCM1480_SCD_PERF_CNT_4            0x00100204F0
+#define A_BCM1480_SCD_PERF_CNT_5            0x00100204F8
+#define A_BCM1480_SCD_PERF_CNT_6            0x0010020500
+#define A_BCM1480_SCD_PERF_CNT_7            0x0010020508
+
+#define BCM1480_SCD_NUM_PERF_CNT 8
+#define BCM1480_SCD_PERF_CNT_SPACING 8
+#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING))
+
+/*  *********************************************************************
+    * System Bus Watcher Registers (Section 4.8)
+    ********************************************************************* */
+
+
+/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
+
+#define A_BCM1480_BUS_ERR_STATUS_DEBUG      0x00100208D8
+
+/*  *********************************************************************
+    * System Debug Controller Registers (Section 19)
+    ********************************************************************* */
+
+/* Same as 1250 */
+
+/*  *********************************************************************
+    * System Trace Unit Registers (Sections 4.10)
+    ********************************************************************* */
+
+/* Same as 1250 */
+
+/*  *********************************************************************
+    * Data Mover DMA Registers (Section 10.7)
+    ********************************************************************* */
+
+/* Same as 1250 */
+
+
+/*  *********************************************************************
+    * HyperTransport Interface Registers (Section 8)
+    ********************************************************************* */
+
+#define BCM1480_HT_NUM_PORTS		   3
+#define BCM1480_HT_PORT_SPACING		   0x800
+#define A_BCM1480_HT_PORT_HEADER(x)	   (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING))
+
+#define A_BCM1480_HT_PORT0_HEADER          0x00FE000000
+#define A_BCM1480_HT_PORT1_HEADER          0x00FE000800
+#define A_BCM1480_HT_PORT2_HEADER          0x00FE001000
+#define A_BCM1480_HT_TYPE00_HEADER         0x00FE002000
+
+
+/*  *********************************************************************
+    * Node Controller Registers (Section 9)
+    ********************************************************************* */
+
+#define A_BCM1480_NC_BASE                   0x00DFBD0000
+
+#define A_BCM1480_NC_RLD_FIELD              0x00DFBD0000
+#define A_BCM1480_NC_RLD_TRIGGER            0x00DFBD0020
+#define A_BCM1480_NC_RLD_BAD_ERROR          0x00DFBD0040
+#define A_BCM1480_NC_RLD_COR_ERROR          0x00DFBD0060
+#define A_BCM1480_NC_RLD_ECC_STATUS         0x00DFBD0080
+#define A_BCM1480_NC_RLD_WAY_ENABLE         0x00DFBD00A0
+#define A_BCM1480_NC_RLD_RANDOM_LFSR        0x00DFBD00C0
+
+#define A_BCM1480_NC_INTERRUPT_STATUS       0x00DFBD00E0
+#define A_BCM1480_NC_INTERRUPT_ENABLE       0x00DFBD0100
+#define A_BCM1480_NC_TIMEOUT_COUNTER        0x00DFBD0120
+#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL    0x00DFBD0140
+
+#define A_BCM1480_NC_CREDIT_STATUS_REG0     0x00DFBD0200
+#define A_BCM1480_NC_CREDIT_STATUS_REG1     0x00DFBD0220
+#define A_BCM1480_NC_CREDIT_STATUS_REG2     0x00DFBD0240
+#define A_BCM1480_NC_CREDIT_STATUS_REG3     0x00DFBD0260
+#define A_BCM1480_NC_CREDIT_STATUS_REG4     0x00DFBD0280
+#define A_BCM1480_NC_CREDIT_STATUS_REG5     0x00DFBD02A0
+#define A_BCM1480_NC_CREDIT_STATUS_REG6     0x00DFBD02C0
+#define A_BCM1480_NC_CREDIT_STATUS_REG7     0x00DFBD02E0
+#define A_BCM1480_NC_CREDIT_STATUS_REG8     0x00DFBD0300
+#define A_BCM1480_NC_CREDIT_STATUS_REG9     0x00DFBD0320
+#define A_BCM1480_NC_CREDIT_STATUS_REG10    0x00DFBE0000
+#define A_BCM1480_NC_CREDIT_STATUS_REG11    0x00DFBE0020
+#define A_BCM1480_NC_CREDIT_STATUS_REG12    0x00DFBE0040
+
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER     0x00DFBE0060
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080
+
+
+/*  *********************************************************************
+    * H&R Block Configuration Registers (Section 12.4)
+    ********************************************************************* */
+
+#define A_BCM1480_HR_BASE_0                 0x00DF820000
+#define A_BCM1480_HR_BASE_1                 0x00DF8A0000
+#define A_BCM1480_HR_BASE_2                 0x00DF920000
+#define BCM1480_HR_REGISTER_SPACING         0x80000
+
+#define A_BCM1480_HR_BASE(idx)              (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING))
+#define A_BCM1480_HR_REGISTER(idx, reg)      (A_BCM1480_HR_BASE(idx) + (reg))
+
+#define R_BCM1480_HR_CFG                    0x0000000000
+
+#define R_BCM1480_HR_MAPPING		    0x0000010010
+
+#define BCM1480_HR_RULE_SPACING             0x0000000010
+#define BCM1480_HR_NUM_RULES                16
+#define BCM1480_HR_OP_OFFSET                0x0000000100
+#define BCM1480_HR_TYPE_OFFSET              0x0000000108
+#define R_BCM1480_HR_RULE_OP(idx)           (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+#define R_BCM1480_HR_RULE_TYPE(idx)         (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+
+#define BCM1480_HR_LEAF_SPACING             0x0000000010
+#define BCM1480_HR_NUM_LEAVES               10
+#define BCM1480_HR_LEAF_OFFSET              0x0000000300
+#define R_BCM1480_HR_HA_LEAF0(idx)          (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING))
+
+#define R_BCM1480_HR_EX_LEAF0               0x00000003A0
+
+#define BCM1480_HR_PATH_SPACING             0x0000000010
+#define BCM1480_HR_NUM_PATHS                16
+#define BCM1480_HR_PATH_OFFSET              0x0000000600
+#define R_BCM1480_HR_PATH(idx)              (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING))
+
+#define R_BCM1480_HR_PATH_DEFAULT           0x0000000700
+
+#define BCM1480_HR_ROUTE_SPACING            8
+#define BCM1480_HR_NUM_ROUTES               512
+#define BCM1480_HR_ROUTE_OFFSET             0x0000001000
+#define R_BCM1480_HR_RT_WORD(idx)           (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING))
+
+
+/* checked to here - ehs */
+/*  *********************************************************************
+    * Packet Manager DMA Registers (Section 12.5)
+    ********************************************************************* */
+
+#define A_BCM1480_PM_BASE                   0x0010056000
+
+#define A_BCM1480_PMI_LCL_0                 0x0010058000
+#define A_BCM1480_PMO_LCL_0                 0x001005C000
+#define A_BCM1480_PMI_OFFSET_0              (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_OFFSET_0              (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE)
+
+#define BCM1480_PM_LCL_REGISTER_SPACING     0x100
+#define BCM1480_PM_NUM_CHANNELS             32
+
+#define A_BCM1480_PMI_LCL_BASE(idx)             (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMI_LCL_REGISTER(idx, reg)     (A_BCM1480_PMI_LCL_BASE(idx) + (reg))
+#define A_BCM1480_PMO_LCL_BASE(idx)             (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMO_LCL_REGISTER(idx, reg)     (A_BCM1480_PMO_LCL_BASE(idx) + (reg))
+
+#define BCM1480_PM_INT_PACKING              8
+#define BCM1480_PM_INT_FUNCTION_SPACING     0x40
+#define BCM1480_PM_INT_NUM_FUNCTIONS        3
+
+/*
+ * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n)
+ */
+
+#define R_BCM1480_PM_BASE_SIZE              0x0000000000
+#define R_BCM1480_PM_CNT                    0x0000000008
+#define R_BCM1480_PM_PFCNT                  0x0000000010
+#define R_BCM1480_PM_LAST                   0x0000000018
+#define R_BCM1480_PM_PFINDX                 0x0000000020
+#define R_BCM1480_PM_INT_WMK                0x0000000028
+#define R_BCM1480_PM_CONFIG0                0x0000000030
+#define R_BCM1480_PM_LOCALDEBUG             0x0000000078
+#define R_BCM1480_PM_CACHEABILITY           0x0000000080   /* PMI only */
+#define R_BCM1480_PM_INT_CNFG               0x0000000088
+#define R_BCM1480_PM_DESC_MERGE_TIMER       0x0000000090
+#define R_BCM1480_PM_LOCALDEBUG_PIB         0x00000000F8   /* PMI only */
+#define R_BCM1480_PM_LOCALDEBUG_POB         0x00000000F8   /* PMO only */
+
+/*
+ * Global Registers (Not Channelized)
+ */
+
+#define A_BCM1480_PMI_GLB_0                 0x0010056000
+#define A_BCM1480_PMO_GLB_0                 0x0010057000
+
+/*
+ * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0
+ */
+
+#define R_BCM1480_PM_PMO_MAPPING            0x00000008C8   /* PMO only */
+
+#define A_BCM1480_PM_PMO_MAPPING	(A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING)
+
+/*
+ * Interrupt mapping registers
+ */
+
+
+#define A_BCM1480_PMI_INT_0                 0x0010056800
+#define A_BCM1480_PMI_INT(q)                (A_BCM1480_PMI_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMI_INT_OFFSET_0          (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_INT_0                 0x0010057800
+#define A_BCM1480_PMO_INT(q)                (A_BCM1480_PMO_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMO_INT_OFFSET_0          (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE)
+
+/*
+ * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0
+ */
+
+#define R_BCM1480_PM_INT_ST                 0x0000000000
+#define R_BCM1480_PM_INT_MSK                0x0000000040
+#define R_BCM1480_PM_INT_CLR                0x0000000080
+#define R_BCM1480_PM_MRGD_INT               0x00000000C0
+
+/*
+ * Debug registers (global)
+ */
+
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI    0x0010056000
+#define A_BCM1480_PM_GLOBALDEBUG_PID        0x00100567F8
+#define A_BCM1480_PM_GLOBALDEBUG_PIB        0x0010056FF8
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO    0x0010057000
+#define A_BCM1480_PM_GLOBALDEBUG_POD        0x00100577F8
+#define A_BCM1480_PM_GLOBALDEBUG_POB        0x0010057FF8
+
+/*  *********************************************************************
+    *  Switch performance counters
+    ********************************************************************* */
+
+#define A_BCM1480_SWPERF_CFG	0xdfb91800
+#define A_BCM1480_SWPERF_CNT0	0xdfb91880
+#define A_BCM1480_SWPERF_CNT1	0xdfb91888
+#define A_BCM1480_SWPERF_CNT2	0xdfb91890
+#define A_BCM1480_SWPERF_CNT3	0xdfb91898
+
+
+/*  *********************************************************************
+    *  Switch Trace Unit
+    ********************************************************************* */
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL_0		0xDFB91000
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0	0xDFB91100
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0	0xDFB91108
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0	0xDFB91200
+#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0	0xDFB91208
+#define A_BCM1480_SWTRC_EVENT_0			0xDFB91300
+#define A_BCM1480_SWTRC_SEQUENCE_0		0xDFB91400
+
+#define A_BCM1480_SWTRC_CFG			0xDFB91500
+#define A_BCM1480_SWTRC_READ			0xDFB91508
+
+#define A_BCM1480_SWDEBUG_SCHEDSTOP		0xDFB92000
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8))
+#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8))
+#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8))
+
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16))
+
+
+
+/*  *********************************************************************
+    *  High-Speed Port Registers (Section 13)
+    ********************************************************************* */
+
+#define A_BCM1480_HSP_BASE_0                0x00DF810000
+#define A_BCM1480_HSP_BASE_1                0x00DF890000
+#define A_BCM1480_HSP_BASE_2                0x00DF910000
+#define BCM1480_HSP_REGISTER_SPACING        0x80000
+
+#define A_BCM1480_HSP_BASE(idx)             (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING))
+#define A_BCM1480_HSP_REGISTER(idx, reg)     (A_BCM1480_HSP_BASE(idx) + (reg))
+
+#define R_BCM1480_HSP_RX_SPI4_CFG_0           0x0000000000
+#define R_BCM1480_HSP_RX_SPI4_CFG_1           0x0000000008
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN     0x0000000020
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028
+
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0      0x0000000200
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1      0x0000000208
+
+#define R_BCM1480_HSP_RX_PLL_CNFG             0x0000000800
+#define R_BCM1480_HSP_RX_CALIBRATION          0x0000000808
+#define R_BCM1480_HSP_RX_TEST                 0x0000000810
+#define R_BCM1480_HSP_RX_DIAG_DETAILS         0x0000000818
+#define R_BCM1480_HSP_RX_DIAG_CRC_0           0x0000000820
+#define R_BCM1480_HSP_RX_DIAG_CRC_1           0x0000000828
+#define R_BCM1480_HSP_RX_DIAG_HTCMD           0x0000000830
+#define R_BCM1480_HSP_RX_DIAG_PKTCTL          0x0000000838
+
+#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER   0x0000000870
+
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0       0x0000020020
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1       0x0000020028
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2       0x0000020030
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3       0x0000020038
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4       0x0000020040
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5       0x0000020048
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6       0x0000020050
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7       0x0000020058
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx)    (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx))
+
+/* XXX Following registers were shuffled.  Renamed/renumbered per errata. */
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_0      0x0000020078
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_1      0x0000020080
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_2      0x0000020088
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_3      0x0000020090
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_4      0x0000020098
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_5      0x00000200A0
+
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_0      0x00000200B0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_1      0x00000200B8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_2      0x00000200C0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_3      0x00000200C8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_4      0x00000200D0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_5      0x00000200D8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_6      0x00000200E0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_7      0x00000200E8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx)   (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx))
+
+#define R_BCM1480_HSP_RX_VIS_CMDQ_0           0x00000200F0
+#define R_BCM1480_HSP_RX_VIS_CMDQ_1           0x00000200F8
+#define R_BCM1480_HSP_RX_VIS_CMDQ_2           0x0000020100
+#define R_BCM1480_HSP_RX_RAM_READCTL          0x0000020108
+#define R_BCM1480_HSP_RX_RAM_READWINDOW       0x0000020110
+#define R_BCM1480_HSP_RX_RF_READCTL           0x0000020118
+#define R_BCM1480_HSP_RX_RF_READWINDOW        0x0000020120
+
+#define R_BCM1480_HSP_TX_SPI4_CFG_0           0x0000040000
+#define R_BCM1480_HSP_TX_SPI4_CFG_1           0x0000040008
+#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT    0x0000040010
+
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0       0x0000040020
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1       0x0000040028
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2       0x0000040030
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3       0x0000040038
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4       0x0000040040
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5       0x0000040048
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6       0x0000040050
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7       0x0000040058
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx)    (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_NPC_RAMALLOC         0x0000040078
+#define R_BCM1480_HSP_TX_RSP_RAMALLOC         0x0000040080
+#define R_BCM1480_HSP_TX_PC_RAMALLOC          0x0000040088
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0      0x0000040090
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1      0x0000040098
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2      0x00000400A0
+
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0      0x00000400B0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1      0x00000400B8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2      0x00000400C0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3      0x00000400C8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx)   (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT       0x00000400D0
+#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT       0x00000400D8
+
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0      0x00000400E0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1      0x00000400E8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2      0x00000400F0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3      0x00000400F8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx)   (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT       0x0000040100
+#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT       0x0000040108
+
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0      0x0000040200
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1      0x0000040208
+
+#define R_BCM1480_HSP_TX_PLL_CNFG             0x0000040800
+#define R_BCM1480_HSP_TX_CALIBRATION          0x0000040808
+#define R_BCM1480_HSP_TX_TEST                 0x0000040810
+
+#define R_BCM1480_HSP_TX_VIS_CMDQ_0           0x0000040840
+#define R_BCM1480_HSP_TX_VIS_CMDQ_1           0x0000040848
+#define R_BCM1480_HSP_TX_VIS_CMDQ_2           0x0000040850
+#define R_BCM1480_HSP_TX_RAM_READCTL          0x0000040860
+#define R_BCM1480_HSP_TX_RAM_READWINDOW       0x0000040868
+#define R_BCM1480_HSP_TX_RF_READCTL           0x0000040870
+#define R_BCM1480_HSP_TX_RF_READWINDOW        0x0000040878
+
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN     0x0000040888
+
+#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400
+#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x)  (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x))
+
+
+
+/*  *********************************************************************
+    *  Physical Address Map (Table 10 and Figure 7)
+    ********************************************************************* */
+
+#define A_BCM1480_PHYS_MEMORY_0                 _SB_MAKE64(0x0000000000)
+#define A_BCM1480_PHYS_MEMORY_SIZE              _SB_MAKE64((256*1024*1024))
+#define A_BCM1480_PHYS_SYSTEM_CTL               _SB_MAKE64(0x0010000000)
+#define A_BCM1480_PHYS_IO_SYSTEM                _SB_MAKE64(0x0010060000)
+#define A_BCM1480_PHYS_GENBUS                   _SB_MAKE64(0x0010090000)
+#define A_BCM1480_PHYS_GENBUS_END               _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES     _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES     _SB_MAKE64(0x0029000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES       _SB_MAKE64(0x002C000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES      _SB_MAKE64(0x002E000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES     _SB_MAKE64(0x002F000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES      _SB_MAKE64(0x0030000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES       _SB_MAKE64(0x0040000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS        _SB_MAKE64(0x0060000000)
+#define A_BCM1480_PHYS_MEMORY_1                 _SB_MAKE64(0x0080000000)
+#define A_BCM1480_PHYS_MEMORY_2                 _SB_MAKE64(0x0090000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS      _SB_MAKE64(0x00A8000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS      _SB_MAKE64(0x00A9000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS        _SB_MAKE64(0x00AC000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS       _SB_MAKE64(0x00AE000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS      _SB_MAKE64(0x00AF000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS       _SB_MAKE64(0x00B0000000)
+#define A_BCM1480_PHYS_MEMORY_3                 _SB_MAKE64(0x00C0000000)
+#define A_BCM1480_PHYS_L2_CACHE_TEST            _SB_MAKE64(0x00D0000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES   _SB_MAKE64(0x00D8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES        _SB_MAKE64(0x00DC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES       _SB_MAKE64(0x00DE000000)
+#define A_BCM1480_PHYS_HS_SUBSYS                _SB_MAKE64(0x00DF000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS    _SB_MAKE64(0x00F8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BITS         _SB_MAKE64(0x00FC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS        _SB_MAKE64(0x00FE000000)
+#define A_BCM1480_PHYS_MEMORY_EXP               _SB_MAKE64(0x0100000000)
+#define A_BCM1480_PHYS_MEMORY_EXP_SIZE          _SB_MAKE64((508*1024*1024*1024))
+#define A_BCM1480_PHYS_PCI_UPPER                _SB_MAKE64(0x1000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES     _SB_MAKE64(0x2000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS      _SB_MAKE64(0x3000000000)
+#define A_BCM1480_PHYS_HT_NODE_ALIAS            _SB_MAKE64(0x4000000000)
+#define A_BCM1480_PHYS_HT_FULLACCESS            _SB_MAKE64(0xF000000000)
+
+
+/*  *********************************************************************
+    *  L2 Cache as RAM (Table 54)
+    ********************************************************************* */
+
+#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE         _SB_MAKE64(0x0000020000)
+#define BCM1480_PHYS_L2CACHE_NUM_WAYS           8
+#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE       _SB_MAKE64(0x0000100000)
+#define A_BCM1480_PHYS_L2CACHE_WAY0             _SB_MAKE64(0x00D0300000)
+#define A_BCM1480_PHYS_L2CACHE_WAY1             _SB_MAKE64(0x00D0320000)
+#define A_BCM1480_PHYS_L2CACHE_WAY2             _SB_MAKE64(0x00D0340000)
+#define A_BCM1480_PHYS_L2CACHE_WAY3             _SB_MAKE64(0x00D0360000)
+#define A_BCM1480_PHYS_L2CACHE_WAY4             _SB_MAKE64(0x00D0380000)
+#define A_BCM1480_PHYS_L2CACHE_WAY5             _SB_MAKE64(0x00D03A0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY6             _SB_MAKE64(0x00D03C0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY7             _SB_MAKE64(0x00D03E0000)
+
+#endif /* _BCM1480_REGS_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_scd.h b/arch/mips/include/asm/sibyte/bcm1480_scd.h
new file mode 100644
index 0000000..25ef24c
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_scd.h
@@ -0,0 +1,406 @@
+/*  *********************************************************************
+    *  BCM1280/BCM1400 Board Support Package
+    *
+    *  SCD Constants and Macros                     File: bcm1480_scd.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the System Control and Debug module.
+    *
+    *  BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03)
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003,2004,2005
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+#ifndef _BCM1480_SCD_H
+#define _BCM1480_SCD_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Pull in the BCM1250's SCD since lots of stuff is the same.
+    ********************************************************************* */
+
+#include "sb1250_scd.h"
+
+/*  *********************************************************************
+    *  Some general notes:
+    *
+    *  This file is basically a "what's new" header file.  Since the
+    *  BCM1250 and the new BCM1480 (and derivatives) share many common
+    *  features, this file contains only what's new or changed from
+    *  the 1250.  (above, you can see that we include the 1250 symbols
+    *  to get the base functionality).
+    *
+    *  In software, be sure to use the correct symbols, particularly
+    *  for blocks that are different between the two chip families.
+    *  All BCM1480-specific symbols have _BCM1480_ in their names,
+    *  and all BCM1250-specific and "base" functions that are common in
+    *  both chips have no special names (this is for compatibility with
+    *  older include files).  Therefore, if you're working with the
+    *  SCD, which is very different on each chip, A_SCD_xxx implies
+    *  the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+    *  version.
+    ********************************************************************* */
+
+/*  *********************************************************************
+    *  System control/debug registers
+    ********************************************************************* */
+
+/*
+ * System Identification and Revision Register (Table 12)
+ * Register: SCD_SYSTEM_REVISION
+ * This register is field compatible with the 1250.
+ */
+
+/*
+ * New part definitions
+ */
+
+#define K_SYS_PART_BCM1480          0x1406
+#define K_SYS_PART_BCM1280          0x1206
+#define K_SYS_PART_BCM1455          0x1407
+#define K_SYS_PART_BCM1255          0x1257
+#define K_SYS_PART_BCM1158          0x1156
+
+/*
+ * Manufacturing Information Register (Table 14)
+ * Register: SCD_SYSTEM_MANUF
+ */
+
+/*
+ * System Configuration Register (Table 15)
+ * Register: SCD_SYSTEM_CFG
+ * Entire register is different from 1250, all new constants below
+ */
+
+#define M_BCM1480_SYS_RESERVED0             _SB_MAKEMASK1(0)
+#define M_BCM1480_SYS_HT_MINRSTCNT          _SB_MAKEMASK1(1)
+#define M_BCM1480_SYS_RESERVED2             _SB_MAKEMASK1(2)
+#define M_BCM1480_SYS_RESERVED3             _SB_MAKEMASK1(3)
+#define M_BCM1480_SYS_RESERVED4             _SB_MAKEMASK1(4)
+#define M_BCM1480_SYS_IOB_DIV               _SB_MAKEMASK1(5)
+
+#define S_BCM1480_SYS_PLL_DIV               _SB_MAKE64(6)
+#define M_BCM1480_SYS_PLL_DIV               _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV)
+#define V_BCM1480_SYS_PLL_DIV(x)            _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV)
+#define G_BCM1480_SYS_PLL_DIV(x)            _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV)
+
+#define S_BCM1480_SYS_SW_DIV                _SB_MAKE64(11)
+#define M_BCM1480_SYS_SW_DIV                _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV)
+#define V_BCM1480_SYS_SW_DIV(x)             _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV)
+#define G_BCM1480_SYS_SW_DIV(x)             _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV)
+
+#define M_BCM1480_SYS_PCMCIA_ENABLE         _SB_MAKEMASK1(16)
+#define M_BCM1480_SYS_DUART1_ENABLE         _SB_MAKEMASK1(17)
+
+#define S_BCM1480_SYS_BOOT_MODE             _SB_MAKE64(18)
+#define M_BCM1480_SYS_BOOT_MODE             _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE)
+#define V_BCM1480_SYS_BOOT_MODE(x)          _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE)
+#define G_BCM1480_SYS_BOOT_MODE(x)          _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE)
+#define K_BCM1480_SYS_BOOT_MODE_ROM32       0
+#define K_BCM1480_SYS_BOOT_MODE_ROM8        1
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG   3
+#define M_BCM1480_SYS_BOOT_MODE_SMBUS       _SB_MAKEMASK1(19)
+
+#define M_BCM1480_SYS_PCI_HOST              _SB_MAKEMASK1(20)
+#define M_BCM1480_SYS_PCI_ARBITER           _SB_MAKEMASK1(21)
+#define M_BCM1480_SYS_BIG_ENDIAN            _SB_MAKEMASK1(22)
+#define M_BCM1480_SYS_GENCLK_EN             _SB_MAKEMASK1(23)
+#define M_BCM1480_SYS_GEN_PARITY_EN         _SB_MAKEMASK1(24)
+#define M_BCM1480_SYS_RESERVED25            _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SYS_CONFIG                26
+#define M_BCM1480_SYS_CONFIG                _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG)
+#define V_BCM1480_SYS_CONFIG(x)             _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG)
+#define G_BCM1480_SYS_CONFIG(x)             _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG)
+
+#define M_BCM1480_SYS_RESERVED32            _SB_MAKEMASK(32, 15)
+
+#define S_BCM1480_SYS_NODEID                47
+#define M_BCM1480_SYS_NODEID                _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID)
+#define V_BCM1480_SYS_NODEID(x)             _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID)
+#define G_BCM1480_SYS_NODEID(x)             _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID)
+
+#define M_BCM1480_SYS_CCNUMA_EN             _SB_MAKEMASK1(51)
+#define M_BCM1480_SYS_CPU_RESET_0           _SB_MAKEMASK1(52)
+#define M_BCM1480_SYS_CPU_RESET_1           _SB_MAKEMASK1(53)
+#define M_BCM1480_SYS_CPU_RESET_2           _SB_MAKEMASK1(54)
+#define M_BCM1480_SYS_CPU_RESET_3           _SB_MAKEMASK1(55)
+#define S_BCM1480_SYS_DISABLECPU0           56
+#define M_BCM1480_SYS_DISABLECPU0           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
+#define S_BCM1480_SYS_DISABLECPU1           57
+#define M_BCM1480_SYS_DISABLECPU1           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
+#define S_BCM1480_SYS_DISABLECPU2           58
+#define M_BCM1480_SYS_DISABLECPU2           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
+#define S_BCM1480_SYS_DISABLECPU3           59
+#define M_BCM1480_SYS_DISABLECPU3           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
+
+#define M_BCM1480_SYS_SB_SOFTRES            _SB_MAKEMASK1(60)
+#define M_BCM1480_SYS_EXT_RESET             _SB_MAKEMASK1(61)
+#define M_BCM1480_SYS_SYSTEM_RESET          _SB_MAKEMASK1(62)
+#define M_BCM1480_SYS_SW_FLAG               _SB_MAKEMASK1(63)
+
+/*
+ * Scratch Register (Table 16)
+ * Register: SCD_SYSTEM_SCRATCH
+ * Same as BCM1250
+ */
+
+
+/*
+ * Mailbox Registers (Table 17)
+ * Registers: SCD_MBOX_{0,1}_CPU_x
+ * Same as BCM1250
+ */
+
+
+/*
+ * See bcm1480_int.h for interrupt mapper registers.
+ */
+
+
+/*
+ * Watchdog Timer Initial Count Registers (Table 23)
+ * Registers: SCD_WDOG_INIT_CNT_x
+ *
+ * The watchdogs are almost the same as the 1250, except
+ * the configuration register has more bits to control the
+ * other CPUs.
+ */
+
+
+/*
+ * Watchdog Timer Configuration Registers (Table 25)
+ * Registers: SCD_WDOG_CFG_x
+ */
+
+#define M_BCM1480_SCD_WDOG_ENABLE           _SB_MAKEMASK1(0)
+
+#define S_BCM1480_SCD_WDOG_RESET_TYPE       2
+#define M_BCM1480_SCD_WDOG_RESET_TYPE       _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define V_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define G_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE)
+
+#define K_BCM1480_SCD_WDOG_RESET_FULL       0	/* actually, (x & 1) == 0  */
+#define K_BCM1480_SCD_WDOG_RESET_SOFT       1
+#define K_BCM1480_SCD_WDOG_RESET_CPU0       3
+#define K_BCM1480_SCD_WDOG_RESET_CPU1       5
+#define K_BCM1480_SCD_WDOG_RESET_CPU2       9
+#define K_BCM1480_SCD_WDOG_RESET_CPU3       17
+#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS   31
+
+
+#define M_BCM1480_SCD_WDOG_HAS_RESET        _SB_MAKEMASK1(8)
+
+/*
+ * General Timer Initial Count Registers (Table 26)
+ * Registers: SCD_TIMER_INIT_x
+ *
+ * The timer registers are the same as the BCM1250
+ */
+
+
+/*
+ * ZBbus Count Register (Table 29)
+ * Register: ZBBUS_CYCLE_COUNT
+ *
+ * Same as BCM1250
+ */
+
+/*
+ * ZBbus Compare Registers (Table 30)
+ * Registers: ZBBUS_CYCLE_CPx
+ *
+ * Same as BCM1250
+ */
+
+
+/*
+ * System Performance Counter Configuration Register (Table 31)
+ * Register: PERF_CNT_CFG_0
+ *
+ * SPC_CFG_SRC[0-3] is the same as the 1250.
+ * SPC_CFG_SRC[4-7] only exist on the 1480
+ * The clear/enable bits are in different locations on the 1250 and 1480.
+ */
+
+#define S_SPC_CFG_SRC4              32
+#define M_SPC_CFG_SRC4              _SB_MAKEMASK(8, S_SPC_CFG_SRC4)
+#define V_SPC_CFG_SRC4(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC4)
+#define G_SPC_CFG_SRC4(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4)
+
+#define S_SPC_CFG_SRC5              40
+#define M_SPC_CFG_SRC5              _SB_MAKEMASK(8, S_SPC_CFG_SRC5)
+#define V_SPC_CFG_SRC5(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC5)
+#define G_SPC_CFG_SRC5(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5)
+
+#define S_SPC_CFG_SRC6              48
+#define M_SPC_CFG_SRC6              _SB_MAKEMASK(8, S_SPC_CFG_SRC6)
+#define V_SPC_CFG_SRC6(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC6)
+#define G_SPC_CFG_SRC6(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6)
+
+#define S_SPC_CFG_SRC7              56
+#define M_SPC_CFG_SRC7              _SB_MAKEMASK(8, S_SPC_CFG_SRC7)
+#define V_SPC_CFG_SRC7(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC7)
+#define G_SPC_CFG_SRC7(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7)
+
+/*
+ * System Performance Counter Control Register (Table 32)
+ * Register: PERF_CNT_CFG_1
+ * BCM1480 specific
+ */
+#define M_BCM1480_SPC_CFG_CLEAR     _SB_MAKEMASK1(0)
+#define M_BCM1480_SPC_CFG_ENABLE    _SB_MAKEMASK1(1)
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_SPC_CFG_CLEAR			M_BCM1480_SPC_CFG_CLEAR
+#define M_SPC_CFG_ENABLE		M_BCM1480_SPC_CFG_ENABLE
+#endif
+
+/*
+ * System Performance Counters (Table 33)
+ * Registers: PERF_CNT_x
+ */
+
+#define S_BCM1480_SPC_CNT_COUNT             0
+#define M_BCM1480_SPC_CNT_COUNT             _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT)
+#define V_BCM1480_SPC_CNT_COUNT(x)          _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT)
+#define G_BCM1480_SPC_CNT_COUNT(x)          _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT)
+
+#define M_BCM1480_SPC_CNT_OFLOW             _SB_MAKEMASK1(40)
+
+
+/*
+ * Bus Watcher Error Status Register (Tables 36, 37)
+ * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher Error Data Registers (Table 38)
+ * Registers: BUS_ERR_DATA_x
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher L2 ECC Counter Register (Table 39)
+ * Register: BUS_L2_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Bus Watcher Memory and I/O Error Counter Register (Table 40)
+ * Register: BUS_MEM_IO_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Address Trap Registers
+ *
+ * Register layout same as BCM1250, almost.  The bus agents
+ * are different, and the address trap configuration bits are
+ * slightly different.
+ */
+
+#define M_BCM1480_ATRAP_INDEX		  _SB_MAKEMASK(4, 0)
+#define M_BCM1480_ATRAP_ADDRESS		  _SB_MAKEMASK(40, 0)
+
+#define S_BCM1480_ATRAP_CFG_CNT            0
+#define M_BCM1480_ATRAP_CFG_CNT            _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT)
+#define V_BCM1480_ATRAP_CFG_CNT(x)         _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT)
+#define G_BCM1480_ATRAP_CFG_CNT(x)         _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT)
+
+#define M_BCM1480_ATRAP_CFG_WRITE	   _SB_MAKEMASK1(3)
+#define M_BCM1480_ATRAP_CFG_ALL	  	   _SB_MAKEMASK1(4)
+#define M_BCM1480_ATRAP_CFG_INV	   	   _SB_MAKEMASK1(5)
+#define M_BCM1480_ATRAP_CFG_USESRC	   _SB_MAKEMASK1(6)
+#define M_BCM1480_ATRAP_CFG_SRCINV	   _SB_MAKEMASK1(7)
+
+#define S_BCM1480_ATRAP_CFG_AGENTID     8
+#define M_BCM1480_ATRAP_CFG_AGENTID     _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID)
+#define V_BCM1480_ATRAP_CFG_AGENTID(x)  _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID)
+#define G_BCM1480_ATRAP_CFG_AGENTID(x)  _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID)
+
+
+#define K_BCM1480_BUS_AGENT_CPU0            0
+#define K_BCM1480_BUS_AGENT_CPU1            1
+#define K_BCM1480_BUS_AGENT_NC              2
+#define K_BCM1480_BUS_AGENT_IOB             3
+#define K_BCM1480_BUS_AGENT_SCD             4
+#define K_BCM1480_BUS_AGENT_L2C             6
+#define K_BCM1480_BUS_AGENT_MC              7
+#define K_BCM1480_BUS_AGENT_CPU2            8
+#define K_BCM1480_BUS_AGENT_CPU3            9
+#define K_BCM1480_BUS_AGENT_PM              10
+
+#define S_BCM1480_ATRAP_CFG_CATTR           12
+#define M_BCM1480_ATRAP_CFG_CATTR           _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR)
+#define V_BCM1480_ATRAP_CFG_CATTR(x)        _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR)
+#define G_BCM1480_ATRAP_CFG_CATTR(x)        _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR)
+
+#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE    0
+#define K_BCM1480_ATRAP_CFG_CATTR_UNC       1
+#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH    2
+#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT  3
+
+#define M_BCM1480_ATRAP_CFG_CATTRINV        _SB_MAKEMASK1(14)
+
+
+/*
+ * Trace Event Registers (Table 47)
+ * Same as BCM1250.
+ */
+
+/*
+ * Trace Sequence Control Registers (Table 48)
+ * Registers: TRACE_SEQUENCE_x
+ *
+ * Same as BCM1250 except for two new fields.
+ */
+
+
+#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN    _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SCD_TRSEQ_SWFUNC          26
+#define M_BCM1480_SCD_TRSEQ_SWFUNC          _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define V_BCM1480_SCD_TRSEQ_SWFUNC(x)       _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define G_BCM1480_SCD_TRSEQ_SWFUNC(x)       _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC)
+
+/*
+ * Trace Control Register (Table 49)
+ * Register: TRACE_CFG
+ *
+ * BCM1480 changes to this register (other than location of the CUR_ADDR field)
+ * are defined below.
+ */
+
+#define S_BCM1480_SCD_TRACE_CFG_MODE        16
+#define M_BCM1480_SCD_TRACE_CFG_MODE        _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE)
+#define V_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE)
+#define G_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE)
+
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS	0
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT	1
+#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID	2
+
+#endif /* _BCM1480_SCD_H */
diff --git a/arch/mips/include/asm/sibyte/bigsur.h b/arch/mips/include/asm/sibyte/bigsur.h
new file mode 100644
index 0000000..ebefe79
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bigsur.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_BIGSUR_H
+#define __ASM_SIBYTE_BIGSUR_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+#ifdef CONFIG_SIBYTE_BIGSUR
+#define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#endif
+
+/* Generic bus chip selects */
+#define LEDS_CS         3
+#define LEDS_PHYS       0x100a0000
+
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS          4
+#define IDE_PHYS        0x100b0000
+#define K_GPIO_GB_IDE   4
+#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS       6
+#define PCMCIA_PHYS     0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY  (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#endif
+
+#endif /* __ASM_SIBYTE_BIGSUR_H */
+
diff --git a/arch/mips/include/asm/sibyte/board.h b/arch/mips/include/asm/sibyte/board.h
new file mode 100644
index 0000000..25372ae
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/board.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _SIBYTE_BOARD_H
+#define _SIBYTE_BOARD_H
+
+#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \
+    defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR)
+#include <asm/sibyte/swarm.h>
+#endif
+
+#if defined(CONFIG_SIBYTE_SENTOSA) || defined(CONFIG_SIBYTE_RHONE)
+#include <asm/sibyte/sentosa.h>
+#endif
+
+#ifdef CONFIG_SIBYTE_CARMEL
+#include <asm/sibyte/carmel.h>
+#endif
+
+#ifdef CONFIG_SIBYTE_BIGSUR
+#include <asm/sibyte/bigsur.h>
+#endif
+
+#ifdef __ASSEMBLY__
+
+#ifdef LEDS_PHYS
+#define setleds(t0, t1, c0, c1, c2, c3) \
+	li	t0, (LEDS_PHYS|0xa0000000); \
+	li	t1, c0; \
+	sb	t1, 0x18(t0); \
+	li	t1, c1; \
+	sb	t1, 0x10(t0); \
+	li	t1, c2; \
+	sb	t1, 0x08(t0); \
+	li	t1, c3; \
+	sb	t1, 0x00(t0)
+#else
+#define setleds(t0, t1, c0, c1, c2, c3)
+#endif /* LEDS_PHYS */
+
+#else
+
+void swarm_setup(void);
+
+#ifdef LEDS_PHYS
+extern void setleds(char *str);
+#else
+#define setleds(s) do { } while (0)
+#endif /* LEDS_PHYS */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _SIBYTE_BOARD_H */
diff --git a/arch/mips/include/asm/sibyte/carmel.h b/arch/mips/include/asm/sibyte/carmel.h
new file mode 100644
index 0000000..11cad71
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/carmel.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_CARMEL_H
+#define __ASM_SIBYTE_CARMEL_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#define SIBYTE_BOARD_NAME "Carmel"
+
+#define GPIO_PHY_INTERRUPT      2
+#define GPIO_NONMASKABLE_INT    3
+#define GPIO_CF_INSERTED        6
+#define GPIO_MONTEREY_RESET     7
+#define GPIO_QUADUART_INT       8
+#define GPIO_CF_INT             9
+#define GPIO_FPGA_CCLK          10
+#define GPIO_FPGA_DOUT          11
+#define GPIO_FPGA_DIN           12
+#define GPIO_FPGA_PGM           13
+#define GPIO_FPGA_DONE          14
+#define GPIO_FPGA_INIT          15
+
+#define LEDS_CS                 2
+#define LEDS_PHYS               0x100C0000
+#define MLEDS_CS                3
+#define MLEDS_PHYS              0x100A0000
+#define UART_CS                 4
+#define UART_PHYS               0x100D0000
+#define ARAVALI_CS              5
+#define ARAVALI_PHYS            0x11000000
+#define IDE_CS                  6
+#define IDE_PHYS                0x100B0000
+#define ARAVALI2_CS             7
+#define ARAVALI2_PHYS           0x100E0000
+
+#if defined(CONFIG_SIBYTE_CARMEL)
+#define K_GPIO_GB_IDE   9
+#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+
+#endif /* __ASM_SIBYTE_CARMEL_H */
diff --git a/arch/mips/include/asm/sibyte/sb1250.h b/arch/mips/include/asm/sibyte/sb1250.h
new file mode 100644
index 0000000..80c1a05
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _ASM_SIBYTE_SB1250_H
+#define _ASM_SIBYTE_SB1250_H
+
+/*
+ * yymmddpp: year, month, day, patch.
+ * should sync with Makefile EXTRAVERSION
+ */
+#define SIBYTE_RELEASE 0x02111403
+
+#define SB1250_NR_IRQS 64
+
+#define BCM1480_NR_IRQS                 128
+#define BCM1480_NR_IRQS_HALF            64
+
+#define SB1250_DUART_MINOR_BASE		64
+
+#ifndef __ASSEMBLY__
+
+#include <asm/addrspace.h>
+
+/* For revision/pass information */
+#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/bcm1480_scd.h>
+extern unsigned int sb1_pass;
+extern unsigned int soc_pass;
+extern unsigned int soc_type;
+extern unsigned int periph_rev;
+extern unsigned int zbbus_mhz;
+
+extern void sb1250_time_init(void);
+extern void sb1250_mask_irq(int cpu, int irq);
+extern void sb1250_unmask_irq(int cpu, int irq);
+
+extern void bcm1480_time_init(void);
+extern void bcm1480_mask_irq(int cpu, int irq);
+extern void bcm1480_unmask_irq(int cpu, int irq);
+
+#define AT_spin \
+	__asm__ __volatile__ (		\
+		".set noat\n"		\
+		"li $at, 0\n"		\
+		"1: beqz $at, 1b\n"	\
+		".set at\n"		\
+		)
+
+#endif
+
+#define IOADDR(a) ((void __iomem *)(IO_BASE + (a)))
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_defs.h b/arch/mips/include/asm/sibyte/sb1250_defs.h
new file mode 100644
index 0000000..09365f9
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_defs.h
@@ -0,0 +1,259 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Global constants and macros		File: sb1250_defs.h
+    *
+    *  This file contains macros and definitions used by the other
+    *  include files.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+#ifndef _SB1250_DEFS_H
+#define _SB1250_DEFS_H
+
+/*
+ * These headers require ANSI C89 string concatenation, and GCC or other
+ * 'long long' (64-bit integer) support.
+ */
+#if !defined(__STDC__) && !defined(_MSC_VER)
+#error SiByte headers require ANSI C89 support
+#endif
+
+
+/*  *********************************************************************
+    *  Macros for feature tests, used to enable include file features
+    *  for chip features only present in certain chip revisions.
+    *
+    *  SIBYTE_HDR_FEATURES may be defined to be the mask value chip/revision
+    *  which is to be exposed by the headers.  If undefined, it defaults to
+    *  "all features."
+    *
+    *  Use like:
+    *
+    *    #define SIBYTE_HDR_FEATURES	SIBYTE_HDR_FMASK_112x_PASS1
+    *
+    *		Generate defines only for that revision of chip.
+    *
+    *    #if SIBYTE_HDR_FEATURE(chip,pass)
+    *
+    *		True if header features for that revision or later of
+    *	        that particular chip type are enabled in SIBYTE_HDR_FEATURES.
+    *	        (Use this to bracket #defines for features present in a given
+    *		revision and later.)
+    *
+    *		Note that there is no implied ordering between chip types.
+    *
+    *		Note also that 'chip' and 'pass' must textually exactly
+    *		match the defines below.  So, for example,
+    *		SIBYTE_HDR_FEATURE(112x, PASS1) is OK, but
+    *		SIBYTE_HDR_FEATURE(1120, pass1) is not (for two reasons).
+    *
+    *    #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass)
+    *
+    *		Same as SIBYTE_HDR_FEATURE, but true for the named revision
+    *		and earlier revisions of the named chip type.
+    *
+    *    #if SIBYTE_HDR_FEATURE_EXACT(chip,pass)
+    *
+    *		Same as SIBYTE_HDR_FEATURE, but only true for the named
+    *		revision of the named chip type.  (Note that this CANNOT
+    *		be used to verify that you're compiling only for that
+    *		particular chip/revision.  It will be true any time this
+    *		chip/revision is included in SIBYTE_HDR_FEATURES.)
+    *
+    *    #if SIBYTE_HDR_FEATURE_CHIP(chip)
+    *
+    *		True if header features for (any revision of) that chip type
+    *		are enabled in SIBYTE_HDR_FEATURES.  (Use this to bracket
+    *		#defines for features specific to a given chip type.)
+    *
+    *  Mask values currently include room for additional revisions of each
+    *  chip type, but can be renumbered at will.  Note that they MUST fit
+    *  into 31 bits and may not include C type constructs, for safe use in
+    *  CPP conditionals.  Bit positions within chip types DO indicate
+    *  ordering, so be careful when adding support for new minor revs.
+    ********************************************************************* */
+
+#define	SIBYTE_HDR_FMASK_1250_ALL		0x000000ff
+#define	SIBYTE_HDR_FMASK_1250_PASS1		0x00000001
+#define	SIBYTE_HDR_FMASK_1250_PASS2		0x00000002
+#define	SIBYTE_HDR_FMASK_1250_PASS3		0x00000004
+
+#define	SIBYTE_HDR_FMASK_112x_ALL		0x00000f00
+#define	SIBYTE_HDR_FMASK_112x_PASS1		0x00000100
+
+#define SIBYTE_HDR_FMASK_1480_ALL		0x0000f000
+#define SIBYTE_HDR_FMASK_1480_PASS1		0x00001000
+#define SIBYTE_HDR_FMASK_1480_PASS2		0x00002000
+
+/* Bit mask for chip/revision.  (use _ALL for all revisions of a chip).  */
+#define	SIBYTE_HDR_FMASK(chip, pass)					\
+    (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass)
+#define	SIBYTE_HDR_FMASK_ALLREVS(chip)					\
+    (SIBYTE_HDR_FMASK_ ## chip ## _ALL)
+
+/* Default constant value for all chips, all revisions */
+#define	SIBYTE_HDR_FMASK_ALL						\
+    (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL		\
+     | SIBYTE_HDR_FMASK_1480_ALL)
+
+/* This one is used for the "original" BCM1250/BCM112x chips.  We use this
+   to weed out constants and macros that do not exist on later chips like
+   the BCM1480  */
+#define SIBYTE_HDR_FMASK_1250_112x_ALL					\
+    (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL)
+#define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL
+
+#ifndef SIBYTE_HDR_FEATURES
+#define	SIBYTE_HDR_FEATURES			SIBYTE_HDR_FMASK_ALL
+#endif
+
+
+/* Bit mask for revisions of chip exclusively before the named revision.  */
+#define	SIBYTE_HDR_FMASK_BEFORE(chip, pass)				\
+    ((SIBYTE_HDR_FMASK(chip, pass) - 1) & SIBYTE_HDR_FMASK_ALLREVS(chip))
+
+/* Bit mask for revisions of chip exclusively after the named revision.  */
+#define	SIBYTE_HDR_FMASK_AFTER(chip, pass)				\
+    (~(SIBYTE_HDR_FMASK(chip, pass)					\
+     | (SIBYTE_HDR_FMASK(chip, pass) - 1)) & SIBYTE_HDR_FMASK_ALLREVS(chip))
+
+
+/* True if header features enabled for (any revision of) that chip type.  */
+#define SIBYTE_HDR_FEATURE_CHIP(chip)					\
+    (!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES))
+
+/* True for all versions of the BCM1250 and BCM1125, but not true for
+   anything else */
+#define SIBYTE_HDR_FEATURE_1250_112x \
+      (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
+/*    (!!  (SIBYTE_HDR_FEATURES & SIBYHTE_HDR_FMASK_1250_112x)) */
+
+/* True if header features enabled for that rev or later, inclusive.  */
+#define SIBYTE_HDR_FEATURE(chip, pass)					\
+    (!! ((SIBYTE_HDR_FMASK(chip, pass)					\
+	  | SIBYTE_HDR_FMASK_AFTER(chip, pass)) & SIBYTE_HDR_FEATURES))
+
+/* True if header features enabled for exactly that rev.  */
+#define SIBYTE_HDR_FEATURE_EXACT(chip, pass)				\
+    (!! (SIBYTE_HDR_FMASK(chip, pass) & SIBYTE_HDR_FEATURES))
+
+/* True if header features enabled for that rev or before, inclusive.  */
+#define SIBYTE_HDR_FEATURE_UP_TO(chip, pass)				\
+    (!! ((SIBYTE_HDR_FMASK(chip, pass)					\
+	 | SIBYTE_HDR_FMASK_BEFORE(chip, pass)) & SIBYTE_HDR_FEATURES))
+
+
+/*  *********************************************************************
+    *  Naming schemes for constants in these files:
+    *
+    *  M_xxx           MASK constant (identifies bits in a register).
+    *                  For multi-bit fields, all bits in the field will
+    *                  be set.
+    *
+    *  K_xxx           "Code" constant (value for data in a multi-bit
+    *                  field).  The value is right justified.
+    *
+    *  V_xxx           "Value" constant.  This is the same as the
+    *                  corresponding "K_xxx" constant, except it is
+    *                  shifted to the correct position in the register.
+    *
+    *  S_xxx           SHIFT constant.  This is the number of bits that
+    *                  a field value (code) needs to be shifted
+    *                  (towards the left) to put the value in the right
+    *                  position for the register.
+    *
+    *  A_xxx           ADDRESS constant.  This will be a physical
+    *                  address.  Use the PHYS_TO_K1 macro to generate
+    *                  a K1SEG address.
+    *
+    *  R_xxx           RELATIVE offset constant.  This is an offset from
+    *                  an A_xxx constant (usually the first register in
+    *                  a group).
+    *
+    *  G_xxx(X)        GET value.  This macro obtains a multi-bit field
+    *                  from a register, masks it, and shifts it to
+    *                  the bottom of the register (retrieving a K_xxx
+    *                  value, for example).
+    *
+    *  V_xxx(X)        VALUE.  This macro computes the value of a
+    *                  K_xxx constant shifted to the correct position
+    *                  in the register.
+    ********************************************************************* */
+
+
+
+
+/*
+ * Cast to 64-bit number.  Presumably the syntax is different in
+ * assembly language.
+ *
+ * Note: you'll need to define uint32_t and uint64_t in your headers.
+ */
+
+#if !defined(__ASSEMBLY__)
+#define _SB_MAKE64(x) ((uint64_t)(x))
+#define _SB_MAKE32(x) ((uint32_t)(x))
+#else
+#define _SB_MAKE64(x) (x)
+#define _SB_MAKE32(x) (x)
+#endif
+
+
+/*
+ * Make a mask for 1 bit at position 'n'
+ */
+
+#define _SB_MAKEMASK1(n) (_SB_MAKE64(1) << _SB_MAKE64(n))
+#define _SB_MAKEMASK1_32(n) (_SB_MAKE32(1) << _SB_MAKE32(n))
+
+/*
+ * Make a mask for 'v' bits at position 'n'
+ */
+
+#define _SB_MAKEMASK(v, n) (_SB_MAKE64((_SB_MAKE64(1)<<(v))-1) << _SB_MAKE64(n))
+#define _SB_MAKEMASK_32(v, n) (_SB_MAKE32((_SB_MAKE32(1)<<(v))-1) << _SB_MAKE32(n))
+
+/*
+ * Make a value at 'v' at bit position 'n'
+ */
+
+#define _SB_MAKEVALUE(v, n) (_SB_MAKE64(v) << _SB_MAKE64(n))
+#define _SB_MAKEVALUE_32(v, n) (_SB_MAKE32(v) << _SB_MAKE32(n))
+
+#define _SB_GETVALUE(v, n, m) ((_SB_MAKE64(v) & _SB_MAKE64(m)) >> _SB_MAKE64(n))
+#define _SB_GETVALUE_32(v, n, m) ((_SB_MAKE32(v) & _SB_MAKE32(m)) >> _SB_MAKE32(n))
+
+/*
+ * Macros to read/write on-chip registers
+ * XXX should we do the PHYS_TO_K1 here?
+ */
+
+
+#if defined(__mips64) && !defined(__ASSEMBLY__)
+#define SBWRITECSR(csr, val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val)
+#define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr)))
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_dma.h b/arch/mips/include/asm/sibyte/sb1250_dma.h
new file mode 100644
index 0000000..bad5617
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_dma.h
@@ -0,0 +1,594 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  DMA definitions				File: sb1250_dma.h
+    *
+    *  This module contains constants and macros useful for
+    *  programming the SB1250's DMA controllers, both the data mover
+    *  and the Ethernet DMA.
+    *
+    *  SB1250 specification level:  User's manual 10/21/02
+    *  BCM1280 specification level: User's manual 11/24/03
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_DMA_H
+#define _SB1250_DMA_H
+
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  DMA Registers
+    ********************************************************************* */
+
+/*
+ * Ethernet and Serial DMA Configuration Register 0  (Table 7-4)
+ * Registers: DMA_CONFIG0_MAC_x_RX_CH_0
+ * Registers: DMA_CONFIG0_MAC_x_TX_CH_0
+ * Registers: DMA_CONFIG0_SER_x_RX
+ * Registers: DMA_CONFIG0_SER_x_TX
+ */
+
+
+#define M_DMA_DROP                  _SB_MAKEMASK1(0)
+
+#define M_DMA_CHAIN_SEL             _SB_MAKEMASK1(1)
+#define M_DMA_RESERVED1             _SB_MAKEMASK1(2)
+
+#define S_DMA_DESC_TYPE		    _SB_MAKE64(1)
+#define M_DMA_DESC_TYPE		    _SB_MAKEMASK(2, S_DMA_DESC_TYPE)
+#define V_DMA_DESC_TYPE(x)          _SB_MAKEVALUE(x, S_DMA_DESC_TYPE)
+#define G_DMA_DESC_TYPE(x)          _SB_GETVALUE(x, S_DMA_DESC_TYPE, M_DMA_DESC_TYPE)
+
+#define K_DMA_DESC_TYPE_RING_AL		0
+#define K_DMA_DESC_TYPE_CHAIN_AL	1
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define K_DMA_DESC_TYPE_RING_UAL_WI	2
+#define K_DMA_DESC_TYPE_RING_UAL_RMW	3
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DMA_EOP_INT_EN            _SB_MAKEMASK1(3)
+#define M_DMA_HWM_INT_EN            _SB_MAKEMASK1(4)
+#define M_DMA_LWM_INT_EN            _SB_MAKEMASK1(5)
+#define M_DMA_TBX_EN                _SB_MAKEMASK1(6)
+#define M_DMA_TDX_EN                _SB_MAKEMASK1(7)
+
+#define S_DMA_INT_PKTCNT            _SB_MAKE64(8)
+#define M_DMA_INT_PKTCNT            _SB_MAKEMASK(8, S_DMA_INT_PKTCNT)
+#define V_DMA_INT_PKTCNT(x)         _SB_MAKEVALUE(x, S_DMA_INT_PKTCNT)
+#define G_DMA_INT_PKTCNT(x)         _SB_GETVALUE(x, S_DMA_INT_PKTCNT, M_DMA_INT_PKTCNT)
+
+#define S_DMA_RINGSZ                _SB_MAKE64(16)
+#define M_DMA_RINGSZ                _SB_MAKEMASK(16, S_DMA_RINGSZ)
+#define V_DMA_RINGSZ(x)             _SB_MAKEVALUE(x, S_DMA_RINGSZ)
+#define G_DMA_RINGSZ(x)             _SB_GETVALUE(x, S_DMA_RINGSZ, M_DMA_RINGSZ)
+
+#define S_DMA_HIGH_WATERMARK        _SB_MAKE64(32)
+#define M_DMA_HIGH_WATERMARK        _SB_MAKEMASK(16, S_DMA_HIGH_WATERMARK)
+#define V_DMA_HIGH_WATERMARK(x)     _SB_MAKEVALUE(x, S_DMA_HIGH_WATERMARK)
+#define G_DMA_HIGH_WATERMARK(x)     _SB_GETVALUE(x, S_DMA_HIGH_WATERMARK, M_DMA_HIGH_WATERMARK)
+
+#define S_DMA_LOW_WATERMARK         _SB_MAKE64(48)
+#define M_DMA_LOW_WATERMARK         _SB_MAKEMASK(16, S_DMA_LOW_WATERMARK)
+#define V_DMA_LOW_WATERMARK(x)      _SB_MAKEVALUE(x, S_DMA_LOW_WATERMARK)
+#define G_DMA_LOW_WATERMARK(x)      _SB_GETVALUE(x, S_DMA_LOW_WATERMARK, M_DMA_LOW_WATERMARK)
+
+/*
+ * Ethernet and Serial DMA Configuration Register 1 (Table 7-5)
+ * Registers: DMA_CONFIG1_MAC_x_RX_CH_0
+ * Registers: DMA_CONFIG1_DMA_x_TX_CH_0
+ * Registers: DMA_CONFIG1_SER_x_RX
+ * Registers: DMA_CONFIG1_SER_x_TX
+ */
+
+#define M_DMA_HDR_CF_EN             _SB_MAKEMASK1(0)
+#define M_DMA_ASIC_XFR_EN           _SB_MAKEMASK1(1)
+#define M_DMA_PRE_ADDR_EN           _SB_MAKEMASK1(2)
+#define M_DMA_FLOW_CTL_EN           _SB_MAKEMASK1(3)
+#define M_DMA_NO_DSCR_UPDT          _SB_MAKEMASK1(4)
+#define M_DMA_L2CA		    _SB_MAKEMASK1(5)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DMA_RX_XTRA_STATUS	    _SB_MAKEMASK1(6)
+#define M_DMA_TX_CPU_PAUSE	    _SB_MAKEMASK1(6)
+#define M_DMA_TX_FC_PAUSE_EN	    _SB_MAKEMASK1(7)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DMA_MBZ1                  _SB_MAKEMASK(6, 15)
+
+#define S_DMA_HDR_SIZE              _SB_MAKE64(21)
+#define M_DMA_HDR_SIZE              _SB_MAKEMASK(9, S_DMA_HDR_SIZE)
+#define V_DMA_HDR_SIZE(x)           _SB_MAKEVALUE(x, S_DMA_HDR_SIZE)
+#define G_DMA_HDR_SIZE(x)           _SB_GETVALUE(x, S_DMA_HDR_SIZE, M_DMA_HDR_SIZE)
+
+#define M_DMA_MBZ2                  _SB_MAKEMASK(5, 32)
+
+#define S_DMA_ASICXFR_SIZE          _SB_MAKE64(37)
+#define M_DMA_ASICXFR_SIZE          _SB_MAKEMASK(9, S_DMA_ASICXFR_SIZE)
+#define V_DMA_ASICXFR_SIZE(x)       _SB_MAKEVALUE(x, S_DMA_ASICXFR_SIZE)
+#define G_DMA_ASICXFR_SIZE(x)       _SB_GETVALUE(x, S_DMA_ASICXFR_SIZE, M_DMA_ASICXFR_SIZE)
+
+#define S_DMA_INT_TIMEOUT           _SB_MAKE64(48)
+#define M_DMA_INT_TIMEOUT           _SB_MAKEMASK(16, S_DMA_INT_TIMEOUT)
+#define V_DMA_INT_TIMEOUT(x)        _SB_MAKEVALUE(x, S_DMA_INT_TIMEOUT)
+#define G_DMA_INT_TIMEOUT(x)        _SB_GETVALUE(x, S_DMA_INT_TIMEOUT, M_DMA_INT_TIMEOUT)
+
+/*
+ * Ethernet and Serial DMA Descriptor base address (Table 7-6)
+ */
+
+#define M_DMA_DSCRBASE_MBZ          _SB_MAKEMASK(4, 0)
+
+
+/*
+ * ASIC Mode Base Address (Table 7-7)
+ */
+
+#define M_DMA_ASIC_BASE_MBZ         _SB_MAKEMASK(20, 0)
+
+/*
+ * DMA Descriptor Count Registers (Table 7-8)
+ */
+
+/* No bitfields */
+
+
+/*
+ * Current Descriptor Address Register (Table 7-11)
+ */
+
+#define S_DMA_CURDSCR_ADDR          _SB_MAKE64(0)
+#define M_DMA_CURDSCR_ADDR          _SB_MAKEMASK(40, S_DMA_CURDSCR_ADDR)
+#define S_DMA_CURDSCR_COUNT         _SB_MAKE64(40)
+#define M_DMA_CURDSCR_COUNT         _SB_MAKEMASK(16, S_DMA_CURDSCR_COUNT)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DMA_TX_CH_PAUSE_ON	    _SB_MAKEMASK1(56)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*
+ * Receive Packet Drop Registers
+ */
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_OODLOST_RX           _SB_MAKE64(0)
+#define M_DMA_OODLOST_RX           _SB_MAKEMASK(16, S_DMA_OODLOST_RX)
+#define G_DMA_OODLOST_RX(x)        _SB_GETVALUE(x, S_DMA_OODLOST_RX, M_DMA_OODLOST_RX)
+
+#define S_DMA_EOP_COUNT_RX         _SB_MAKE64(16)
+#define M_DMA_EOP_COUNT_RX         _SB_MAKEMASK(8, S_DMA_EOP_COUNT_RX)
+#define G_DMA_EOP_COUNT_RX(x)      _SB_GETVALUE(x, S_DMA_EOP_COUNT_RX, M_DMA_EOP_COUNT_RX)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*  *********************************************************************
+    *  DMA Descriptors
+    ********************************************************************* */
+
+/*
+ * Descriptor doubleword "A"  (Table 7-12)
+ */
+
+#define S_DMA_DSCRA_OFFSET          _SB_MAKE64(0)
+#define M_DMA_DSCRA_OFFSET          _SB_MAKEMASK(5, S_DMA_DSCRA_OFFSET)
+#define V_DMA_DSCRA_OFFSET(x)       _SB_MAKEVALUE(x, S_DMA_DSCRA_OFFSET)
+#define G_DMA_DSCRA_OFFSET(x)       _SB_GETVALUE(x, S_DMA_DSCRA_OFFSET, M_DMA_DSCRA_OFFSET)
+
+/* Note: Don't shift the address over, just mask it with the mask below */
+#define S_DMA_DSCRA_A_ADDR          _SB_MAKE64(5)
+#define M_DMA_DSCRA_A_ADDR          _SB_MAKEMASK(35, S_DMA_DSCRA_A_ADDR)
+
+#define M_DMA_DSCRA_A_ADDR_OFFSET   (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRA_A_ADDR_UA        _SB_MAKE64(0)
+#define M_DMA_DSCRA_A_ADDR_UA        _SB_MAKEMASK(40, S_DMA_DSCRA_A_ADDR_UA)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_DMA_DSCRA_A_SIZE          _SB_MAKE64(40)
+#define M_DMA_DSCRA_A_SIZE          _SB_MAKEMASK(9, S_DMA_DSCRA_A_SIZE)
+#define V_DMA_DSCRA_A_SIZE(x)       _SB_MAKEVALUE(x, S_DMA_DSCRA_A_SIZE)
+#define G_DMA_DSCRA_A_SIZE(x)       _SB_GETVALUE(x, S_DMA_DSCRA_A_SIZE, M_DMA_DSCRA_A_SIZE)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRA_DSCR_CNT	    _SB_MAKE64(40)
+#define M_DMA_DSCRA_DSCR_CNT	    _SB_MAKEMASK(8, S_DMA_DSCRA_DSCR_CNT)
+#define G_DMA_DSCRA_DSCR_CNT(x)	    _SB_GETVALUE(x, S_DMA_DSCRA_DSCR_CNT, M_DMA_DSCRA_DSCR_CNT)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DMA_DSCRA_INTERRUPT       _SB_MAKEMASK1(49)
+#define M_DMA_DSCRA_OFFSETB	    _SB_MAKEMASK1(50)
+
+#define S_DMA_DSCRA_STATUS          _SB_MAKE64(51)
+#define M_DMA_DSCRA_STATUS          _SB_MAKEMASK(13, S_DMA_DSCRA_STATUS)
+#define V_DMA_DSCRA_STATUS(x)       _SB_MAKEVALUE(x, S_DMA_DSCRA_STATUS)
+#define G_DMA_DSCRA_STATUS(x)       _SB_GETVALUE(x, S_DMA_DSCRA_STATUS, M_DMA_DSCRA_STATUS)
+
+/*
+ * Descriptor doubleword "B"  (Table 7-13)
+ */
+
+
+#define S_DMA_DSCRB_OPTIONS         _SB_MAKE64(0)
+#define M_DMA_DSCRB_OPTIONS         _SB_MAKEMASK(4, S_DMA_DSCRB_OPTIONS)
+#define V_DMA_DSCRB_OPTIONS(x)      _SB_MAKEVALUE(x, S_DMA_DSCRB_OPTIONS)
+#define G_DMA_DSCRB_OPTIONS(x)      _SB_GETVALUE(x, S_DMA_DSCRB_OPTIONS, M_DMA_DSCRB_OPTIONS)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRB_A_SIZE        _SB_MAKE64(8)
+#define M_DMA_DSCRB_A_SIZE        _SB_MAKEMASK(14, S_DMA_DSCRB_A_SIZE)
+#define V_DMA_DSCRB_A_SIZE(x)     _SB_MAKEVALUE(x, S_DMA_DSCRB_A_SIZE)
+#define G_DMA_DSCRB_A_SIZE(x)     _SB_GETVALUE(x, S_DMA_DSCRB_A_SIZE, M_DMA_DSCRB_A_SIZE)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define R_DMA_DSCRB_ADDR            _SB_MAKE64(0x10)
+
+/* Note: Don't shift the address over, just mask it with the mask below */
+#define S_DMA_DSCRB_B_ADDR          _SB_MAKE64(5)
+#define M_DMA_DSCRB_B_ADDR          _SB_MAKEMASK(35, S_DMA_DSCRB_B_ADDR)
+
+#define S_DMA_DSCRB_B_SIZE          _SB_MAKE64(40)
+#define M_DMA_DSCRB_B_SIZE          _SB_MAKEMASK(9, S_DMA_DSCRB_B_SIZE)
+#define V_DMA_DSCRB_B_SIZE(x)       _SB_MAKEVALUE(x, S_DMA_DSCRB_B_SIZE)
+#define G_DMA_DSCRB_B_SIZE(x)       _SB_GETVALUE(x, S_DMA_DSCRB_B_SIZE, M_DMA_DSCRB_B_SIZE)
+
+#define M_DMA_DSCRB_B_VALID         _SB_MAKEMASK1(49)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRB_PKT_SIZE_MSB    _SB_MAKE64(48)
+#define M_DMA_DSCRB_PKT_SIZE_MSB    _SB_MAKEMASK(2, S_DMA_DSCRB_PKT_SIZE_MSB)
+#define V_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB)
+#define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB, M_DMA_DSCRB_PKT_SIZE_MSB)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_DMA_DSCRB_PKT_SIZE        _SB_MAKE64(50)
+#define M_DMA_DSCRB_PKT_SIZE        _SB_MAKEMASK(14, S_DMA_DSCRB_PKT_SIZE)
+#define V_DMA_DSCRB_PKT_SIZE(x)     _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE)
+#define G_DMA_DSCRB_PKT_SIZE(x)     _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE, M_DMA_DSCRB_PKT_SIZE)
+
+/*
+ * from pass2 some bits in dscr_b are also used for rx status
+ */
+#define S_DMA_DSCRB_STATUS          _SB_MAKE64(0)
+#define M_DMA_DSCRB_STATUS          _SB_MAKEMASK(1, S_DMA_DSCRB_STATUS)
+#define V_DMA_DSCRB_STATUS(x)       _SB_MAKEVALUE(x, S_DMA_DSCRB_STATUS)
+#define G_DMA_DSCRB_STATUS(x)       _SB_GETVALUE(x, S_DMA_DSCRB_STATUS, M_DMA_DSCRB_STATUS)
+
+/*
+ * Ethernet Descriptor Status Bits (Table 7-15)
+ */
+
+#define M_DMA_ETHRX_BADIP4CS        _SB_MAKEMASK1(51)
+#define M_DMA_ETHRX_DSCRERR	    _SB_MAKEMASK1(52)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: This bit is in the DSCR_B options field */
+#define M_DMA_ETHRX_BADTCPCS	_SB_MAKEMASK1(0)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: These bits are in the DSCR_B options field */
+#define M_DMA_ETH_VLAN_FLAG	_SB_MAKEMASK1(1)
+#define M_DMA_ETH_CRC_FLAG	_SB_MAKEMASK1(2)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_DMA_ETHRX_RXCH            53
+#define M_DMA_ETHRX_RXCH            _SB_MAKEMASK(2, S_DMA_ETHRX_RXCH)
+#define V_DMA_ETHRX_RXCH(x)         _SB_MAKEVALUE(x, S_DMA_ETHRX_RXCH)
+#define G_DMA_ETHRX_RXCH(x)         _SB_GETVALUE(x, S_DMA_ETHRX_RXCH, M_DMA_ETHRX_RXCH)
+
+#define S_DMA_ETHRX_PKTTYPE         55
+#define M_DMA_ETHRX_PKTTYPE         _SB_MAKEMASK(3, S_DMA_ETHRX_PKTTYPE)
+#define V_DMA_ETHRX_PKTTYPE(x)      _SB_MAKEVALUE(x, S_DMA_ETHRX_PKTTYPE)
+#define G_DMA_ETHRX_PKTTYPE(x)      _SB_GETVALUE(x, S_DMA_ETHRX_PKTTYPE, M_DMA_ETHRX_PKTTYPE)
+
+#define K_DMA_ETHRX_PKTTYPE_IPV4    0
+#define K_DMA_ETHRX_PKTTYPE_ARPV4   1
+#define K_DMA_ETHRX_PKTTYPE_802     2
+#define K_DMA_ETHRX_PKTTYPE_OTHER   3
+#define K_DMA_ETHRX_PKTTYPE_USER0   4
+#define K_DMA_ETHRX_PKTTYPE_USER1   5
+#define K_DMA_ETHRX_PKTTYPE_USER2   6
+#define K_DMA_ETHRX_PKTTYPE_USER3   7
+
+#define M_DMA_ETHRX_MATCH_HASH      _SB_MAKEMASK1(58)
+#define M_DMA_ETHRX_MATCH_EXACT     _SB_MAKEMASK1(59)
+#define M_DMA_ETHRX_BCAST           _SB_MAKEMASK1(60)
+#define M_DMA_ETHRX_MCAST           _SB_MAKEMASK1(61)
+#define M_DMA_ETHRX_BAD	            _SB_MAKEMASK1(62)
+#define M_DMA_ETHRX_SOP             _SB_MAKEMASK1(63)
+
+/*
+ * Ethernet Transmit Status Bits (Table 7-16)
+ */
+
+#define M_DMA_ETHTX_SOP	    	    _SB_MAKEMASK1(63)
+
+/*
+ * Ethernet Transmit Options (Table 7-17)
+ */
+
+#define K_DMA_ETHTX_NOTSOP          _SB_MAKE64(0x00)
+#define K_DMA_ETHTX_APPENDCRC       _SB_MAKE64(0x01)
+#define K_DMA_ETHTX_REPLACECRC      _SB_MAKE64(0x02)
+#define K_DMA_ETHTX_APPENDCRC_APPENDPAD _SB_MAKE64(0x03)
+#define K_DMA_ETHTX_APPENDVLAN_REPLACECRC _SB_MAKE64(0x04)
+#define K_DMA_ETHTX_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x05)
+#define K_DMA_ETHTX_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x6)
+#define K_DMA_ETHTX_NOMODS          _SB_MAKE64(0x07)
+#define K_DMA_ETHTX_RESERVED1       _SB_MAKE64(0x08)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC _SB_MAKE64(0x09)
+#define K_DMA_ETHTX_REPLACESADDR_REPLACECRC _SB_MAKE64(0x0A)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC_APPENDPAD _SB_MAKE64(0x0B)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDVLAN_REPLACECRC _SB_MAKE64(0x0C)
+#define K_DMA_ETHTX_REPLACESADDR_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x0D)
+#define K_DMA_ETHTX_REPLACESADDR_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x0E)
+#define K_DMA_ETHTX_RESERVED2       _SB_MAKE64(0x0F)
+
+/*
+ * Serial Receive Options (Table 7-18)
+ */
+#define M_DMA_SERRX_CRC_ERROR       _SB_MAKEMASK1(56)
+#define M_DMA_SERRX_ABORT           _SB_MAKEMASK1(57)
+#define M_DMA_SERRX_OCTET_ERROR     _SB_MAKEMASK1(58)
+#define M_DMA_SERRX_LONGFRAME_ERROR _SB_MAKEMASK1(59)
+#define M_DMA_SERRX_SHORTFRAME_ERROR _SB_MAKEMASK1(60)
+#define M_DMA_SERRX_OVERRUN_ERROR   _SB_MAKEMASK1(61)
+#define M_DMA_SERRX_GOOD            _SB_MAKEMASK1(62)
+#define M_DMA_SERRX_SOP             _SB_MAKEMASK1(63)
+
+/*
+ * Serial Transmit Status Bits (Table 7-20)
+ */
+
+#define M_DMA_SERTX_FLAG	    _SB_MAKEMASK1(63)
+
+/*
+ * Serial Transmit Options (Table 7-21)
+ */
+
+#define K_DMA_SERTX_RESERVED        _SB_MAKEMASK1(0)
+#define K_DMA_SERTX_APPENDCRC       _SB_MAKEMASK1(1)
+#define K_DMA_SERTX_APPENDPAD       _SB_MAKEMASK1(2)
+#define K_DMA_SERTX_ABORT           _SB_MAKEMASK1(3)
+
+
+/*  *********************************************************************
+    *  Data Mover Registers
+    ********************************************************************* */
+
+/*
+ * Data Mover Descriptor Base Address Register (Table 7-22)
+ * Register: DM_DSCR_BASE_0
+ * Register: DM_DSCR_BASE_1
+ * Register: DM_DSCR_BASE_2
+ * Register: DM_DSCR_BASE_3
+ */
+
+#define M_DM_DSCR_BASE_MBZ          _SB_MAKEMASK(4, 0)
+
+/*  Note: Just mask the base address and then OR it in. */
+#define S_DM_DSCR_BASE_ADDR         _SB_MAKE64(4)
+#define M_DM_DSCR_BASE_ADDR         _SB_MAKEMASK(36, S_DM_DSCR_BASE_ADDR)
+
+#define S_DM_DSCR_BASE_RINGSZ       _SB_MAKE64(40)
+#define M_DM_DSCR_BASE_RINGSZ       _SB_MAKEMASK(16, S_DM_DSCR_BASE_RINGSZ)
+#define V_DM_DSCR_BASE_RINGSZ(x)    _SB_MAKEVALUE(x, S_DM_DSCR_BASE_RINGSZ)
+#define G_DM_DSCR_BASE_RINGSZ(x)    _SB_GETVALUE(x, S_DM_DSCR_BASE_RINGSZ, M_DM_DSCR_BASE_RINGSZ)
+
+#define S_DM_DSCR_BASE_PRIORITY     _SB_MAKE64(56)
+#define M_DM_DSCR_BASE_PRIORITY     _SB_MAKEMASK(3, S_DM_DSCR_BASE_PRIORITY)
+#define V_DM_DSCR_BASE_PRIORITY(x)  _SB_MAKEVALUE(x, S_DM_DSCR_BASE_PRIORITY)
+#define G_DM_DSCR_BASE_PRIORITY(x)  _SB_GETVALUE(x, S_DM_DSCR_BASE_PRIORITY, M_DM_DSCR_BASE_PRIORITY)
+
+#define K_DM_DSCR_BASE_PRIORITY_1   0
+#define K_DM_DSCR_BASE_PRIORITY_2   1
+#define K_DM_DSCR_BASE_PRIORITY_4   2
+#define K_DM_DSCR_BASE_PRIORITY_8   3
+#define K_DM_DSCR_BASE_PRIORITY_16  4
+
+#define M_DM_DSCR_BASE_ACTIVE       _SB_MAKEMASK1(59)
+#define M_DM_DSCR_BASE_INTERRUPT    _SB_MAKEMASK1(60)
+#define M_DM_DSCR_BASE_RESET        _SB_MAKEMASK1(61)	/* write register */
+#define M_DM_DSCR_BASE_ERROR        _SB_MAKEMASK1(61)	/* read register */
+#define M_DM_DSCR_BASE_ABORT        _SB_MAKEMASK1(62)
+#define M_DM_DSCR_BASE_ENABL        _SB_MAKEMASK1(63)
+
+/*
+ * Data Mover Descriptor Count Register (Table 7-25)
+ */
+
+/* no bitfields */
+
+/*
+ * Data Mover Current Descriptor Address (Table 7-24)
+ * Register: DM_CUR_DSCR_ADDR_0
+ * Register: DM_CUR_DSCR_ADDR_1
+ * Register: DM_CUR_DSCR_ADDR_2
+ * Register: DM_CUR_DSCR_ADDR_3
+ */
+
+#define S_DM_CUR_DSCR_DSCR_ADDR     _SB_MAKE64(0)
+#define M_DM_CUR_DSCR_DSCR_ADDR     _SB_MAKEMASK(40, S_DM_CUR_DSCR_DSCR_ADDR)
+
+#define S_DM_CUR_DSCR_DSCR_COUNT    _SB_MAKE64(48)
+#define M_DM_CUR_DSCR_DSCR_COUNT    _SB_MAKEMASK(16, S_DM_CUR_DSCR_DSCR_COUNT)
+#define V_DM_CUR_DSCR_DSCR_COUNT(r) _SB_MAKEVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT)
+#define G_DM_CUR_DSCR_DSCR_COUNT(r) _SB_GETVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT,\
+                                     M_DM_CUR_DSCR_DSCR_COUNT)
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Data Mover Channel Partial Result Registers
+ * Register: DM_PARTIAL_0
+ * Register: DM_PARTIAL_1
+ * Register: DM_PARTIAL_2
+ * Register: DM_PARTIAL_3
+ */
+#define S_DM_PARTIAL_CRC_PARTIAL      _SB_MAKE64(0)
+#define M_DM_PARTIAL_CRC_PARTIAL      _SB_MAKEMASK(32, S_DM_PARTIAL_CRC_PARTIAL)
+#define V_DM_PARTIAL_CRC_PARTIAL(r)   _SB_MAKEVALUE(r, S_DM_PARTIAL_CRC_PARTIAL)
+#define G_DM_PARTIAL_CRC_PARTIAL(r)   _SB_GETVALUE(r, S_DM_PARTIAL_CRC_PARTIAL,\
+                                       M_DM_PARTIAL_CRC_PARTIAL)
+
+#define S_DM_PARTIAL_TCPCS_PARTIAL    _SB_MAKE64(32)
+#define M_DM_PARTIAL_TCPCS_PARTIAL    _SB_MAKEMASK(16, S_DM_PARTIAL_TCPCS_PARTIAL)
+#define V_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL)
+#define G_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL,\
+                                       M_DM_PARTIAL_TCPCS_PARTIAL)
+
+#define M_DM_PARTIAL_ODD_BYTE         _SB_MAKEMASK1(48)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Data Mover CRC Definition Registers
+ * Register: CRC_DEF_0
+ * Register: CRC_DEF_1
+ */
+#define S_CRC_DEF_CRC_INIT            _SB_MAKE64(0)
+#define M_CRC_DEF_CRC_INIT            _SB_MAKEMASK(32, S_CRC_DEF_CRC_INIT)
+#define V_CRC_DEF_CRC_INIT(r)         _SB_MAKEVALUE(r, S_CRC_DEF_CRC_INIT)
+#define G_CRC_DEF_CRC_INIT(r)         _SB_GETVALUE(r, S_CRC_DEF_CRC_INIT,\
+                                       M_CRC_DEF_CRC_INIT)
+
+#define S_CRC_DEF_CRC_POLY            _SB_MAKE64(32)
+#define M_CRC_DEF_CRC_POLY            _SB_MAKEMASK(32, S_CRC_DEF_CRC_POLY)
+#define V_CRC_DEF_CRC_POLY(r)         _SB_MAKEVALUE(r, S_CRC_DEF_CRC_POLY)
+#define G_CRC_DEF_CRC_POLY(r)         _SB_GETVALUE(r, S_CRC_DEF_CRC_POLY,\
+                                       M_CRC_DEF_CRC_POLY)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Data Mover CRC/Checksum Definition Registers
+ * Register: CTCP_DEF_0
+ * Register: CTCP_DEF_1
+ */
+#define S_CTCP_DEF_CRC_TXOR           _SB_MAKE64(0)
+#define M_CTCP_DEF_CRC_TXOR           _SB_MAKEMASK(32, S_CTCP_DEF_CRC_TXOR)
+#define V_CTCP_DEF_CRC_TXOR(r)        _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_TXOR)
+#define G_CTCP_DEF_CRC_TXOR(r)        _SB_GETVALUE(r, S_CTCP_DEF_CRC_TXOR,\
+                                       M_CTCP_DEF_CRC_TXOR)
+
+#define S_CTCP_DEF_TCPCS_INIT         _SB_MAKE64(32)
+#define M_CTCP_DEF_TCPCS_INIT         _SB_MAKEMASK(16, S_CTCP_DEF_TCPCS_INIT)
+#define V_CTCP_DEF_TCPCS_INIT(r)      _SB_MAKEVALUE(r, S_CTCP_DEF_TCPCS_INIT)
+#define G_CTCP_DEF_TCPCS_INIT(r)      _SB_GETVALUE(r, S_CTCP_DEF_TCPCS_INIT,\
+                                       M_CTCP_DEF_TCPCS_INIT)
+
+#define S_CTCP_DEF_CRC_WIDTH          _SB_MAKE64(48)
+#define M_CTCP_DEF_CRC_WIDTH          _SB_MAKEMASK(2, S_CTCP_DEF_CRC_WIDTH)
+#define V_CTCP_DEF_CRC_WIDTH(r)       _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_WIDTH)
+#define G_CTCP_DEF_CRC_WIDTH(r)       _SB_GETVALUE(r, S_CTCP_DEF_CRC_WIDTH,\
+                                       M_CTCP_DEF_CRC_WIDTH)
+
+#define K_CTCP_DEF_CRC_WIDTH_4        0
+#define K_CTCP_DEF_CRC_WIDTH_2        1
+#define K_CTCP_DEF_CRC_WIDTH_1        2
+
+#define M_CTCP_DEF_CRC_BIT_ORDER      _SB_MAKEMASK1(50)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+
+/*
+ * Data Mover Descriptor Doubleword "A"  (Table 7-26)
+ */
+
+#define S_DM_DSCRA_DST_ADDR         _SB_MAKE64(0)
+#define M_DM_DSCRA_DST_ADDR         _SB_MAKEMASK(40, S_DM_DSCRA_DST_ADDR)
+
+#define M_DM_DSCRA_UN_DEST          _SB_MAKEMASK1(40)
+#define M_DM_DSCRA_UN_SRC           _SB_MAKEMASK1(41)
+#define M_DM_DSCRA_INTERRUPT        _SB_MAKEMASK1(42)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+#define M_DM_DSCRA_THROTTLE         _SB_MAKEMASK1(43)
+#endif /* up to 1250 PASS1 */
+
+#define S_DM_DSCRA_DIR_DEST         _SB_MAKE64(44)
+#define M_DM_DSCRA_DIR_DEST         _SB_MAKEMASK(2, S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST(x)      _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_DEST)
+#define G_DM_DSCRA_DIR_DEST(x)      _SB_GETVALUE(x, S_DM_DSCRA_DIR_DEST, M_DM_DSCRA_DIR_DEST)
+
+#define K_DM_DSCRA_DIR_DEST_INCR    0
+#define K_DM_DSCRA_DIR_DEST_DECR    1
+#define K_DM_DSCRA_DIR_DEST_CONST   2
+
+#define V_DM_DSCRA_DIR_DEST_INCR    _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_INCR, S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST_DECR    _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_DECR, S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST_CONST   _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_CONST, S_DM_DSCRA_DIR_DEST)
+
+#define S_DM_DSCRA_DIR_SRC          _SB_MAKE64(46)
+#define M_DM_DSCRA_DIR_SRC          _SB_MAKEMASK(2, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC(x)       _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_SRC)
+#define G_DM_DSCRA_DIR_SRC(x)       _SB_GETVALUE(x, S_DM_DSCRA_DIR_SRC, M_DM_DSCRA_DIR_SRC)
+
+#define K_DM_DSCRA_DIR_SRC_INCR     0
+#define K_DM_DSCRA_DIR_SRC_DECR     1
+#define K_DM_DSCRA_DIR_SRC_CONST    2
+
+#define V_DM_DSCRA_DIR_SRC_INCR     _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC_DECR     _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC_CONST    _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_CONST, S_DM_DSCRA_DIR_SRC)
+
+
+#define M_DM_DSCRA_ZERO_MEM         _SB_MAKEMASK1(48)
+#define M_DM_DSCRA_PREFETCH         _SB_MAKEMASK1(49)
+#define M_DM_DSCRA_L2C_DEST         _SB_MAKEMASK1(50)
+#define M_DM_DSCRA_L2C_SRC          _SB_MAKEMASK1(51)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DM_DSCRA_RD_BKOFF	    _SB_MAKEMASK1(52)
+#define M_DM_DSCRA_WR_BKOFF	    _SB_MAKEMASK1(53)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DM_DSCRA_TCPCS_EN         _SB_MAKEMASK1(54)
+#define M_DM_DSCRA_TCPCS_RES        _SB_MAKEMASK1(55)
+#define M_DM_DSCRA_TCPCS_AP         _SB_MAKEMASK1(56)
+#define M_DM_DSCRA_CRC_EN           _SB_MAKEMASK1(57)
+#define M_DM_DSCRA_CRC_RES          _SB_MAKEMASK1(58)
+#define M_DM_DSCRA_CRC_AP           _SB_MAKEMASK1(59)
+#define M_DM_DSCRA_CRC_DFN          _SB_MAKEMASK1(60)
+#define M_DM_DSCRA_CRC_XBIT         _SB_MAKEMASK1(61)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DM_DSCRA_RESERVED2        _SB_MAKEMASK(3, 61)
+
+/*
+ * Data Mover Descriptor Doubleword "B"  (Table 7-25)
+ */
+
+#define S_DM_DSCRB_SRC_ADDR         _SB_MAKE64(0)
+#define M_DM_DSCRB_SRC_ADDR         _SB_MAKEMASK(40, S_DM_DSCRB_SRC_ADDR)
+
+#define S_DM_DSCRB_SRC_LENGTH       _SB_MAKE64(40)
+#define M_DM_DSCRB_SRC_LENGTH       _SB_MAKEMASK(20, S_DM_DSCRB_SRC_LENGTH)
+#define V_DM_DSCRB_SRC_LENGTH(x)    _SB_MAKEVALUE(x, S_DM_DSCRB_SRC_LENGTH)
+#define G_DM_DSCRB_SRC_LENGTH(x)    _SB_GETVALUE(x, S_DM_DSCRB_SRC_LENGTH, M_DM_DSCRB_SRC_LENGTH)
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_genbus.h b/arch/mips/include/asm/sibyte/sb1250_genbus.h
new file mode 100644
index 0000000..94e9c7c
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_genbus.h
@@ -0,0 +1,474 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Generic Bus Constants                     File: sb1250_genbus.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the SB1250's Generic Bus interface
+    *
+    *  SB1250 specification level:  User's manual 10/21/02
+    *  BCM1280 specification level: User's Manual 11/14/03
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000, 2001, 2002, 2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_GENBUS_H
+#define _SB1250_GENBUS_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Generic Bus Region Configuration Registers (Table 11-4)
+ */
+
+#define S_IO_RDY_ACTIVE         0
+#define M_IO_RDY_ACTIVE		_SB_MAKEMASK1(S_IO_RDY_ACTIVE)
+
+#define S_IO_ENA_RDY            1
+#define M_IO_ENA_RDY		_SB_MAKEMASK1(S_IO_ENA_RDY)
+
+#define S_IO_WIDTH_SEL		2
+#define M_IO_WIDTH_SEL		_SB_MAKEMASK(2, S_IO_WIDTH_SEL)
+#define K_IO_WIDTH_SEL_1	0
+#define K_IO_WIDTH_SEL_2	1
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+    || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define K_IO_WIDTH_SEL_1L       2
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define K_IO_WIDTH_SEL_4	3
+#define V_IO_WIDTH_SEL(x)	_SB_MAKEVALUE(x, S_IO_WIDTH_SEL)
+#define G_IO_WIDTH_SEL(x)	_SB_GETVALUE(x, S_IO_WIDTH_SEL, M_IO_WIDTH_SEL)
+
+#define S_IO_PARITY_ENA		4
+#define M_IO_PARITY_ENA		_SB_MAKEMASK1(S_IO_PARITY_ENA)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+    || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_IO_BURST_EN		5
+#define M_IO_BURST_EN		_SB_MAKEMASK1(S_IO_BURST_EN)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define S_IO_PARITY_ODD		6
+#define M_IO_PARITY_ODD		_SB_MAKEMASK1(S_IO_PARITY_ODD)
+#define S_IO_NONMUX		7
+#define M_IO_NONMUX		_SB_MAKEMASK1(S_IO_NONMUX)
+
+#define S_IO_TIMEOUT		8
+#define M_IO_TIMEOUT		_SB_MAKEMASK(8, S_IO_TIMEOUT)
+#define V_IO_TIMEOUT(x)		_SB_MAKEVALUE(x, S_IO_TIMEOUT)
+#define G_IO_TIMEOUT(x)		_SB_GETVALUE(x, S_IO_TIMEOUT, M_IO_TIMEOUT)
+
+/*
+ * Generic Bus Region Size register (Table 11-5)
+ */
+
+#define S_IO_MULT_SIZE		0
+#define M_IO_MULT_SIZE		_SB_MAKEMASK(12, S_IO_MULT_SIZE)
+#define V_IO_MULT_SIZE(x)	_SB_MAKEVALUE(x, S_IO_MULT_SIZE)
+#define G_IO_MULT_SIZE(x)	_SB_GETVALUE(x, S_IO_MULT_SIZE, M_IO_MULT_SIZE)
+
+#define S_IO_REGSIZE		16	 /* # bits to shift size for this reg */
+
+/*
+ * Generic Bus Region Address (Table 11-6)
+ */
+
+#define S_IO_START_ADDR		0
+#define M_IO_START_ADDR		_SB_MAKEMASK(14, S_IO_START_ADDR)
+#define V_IO_START_ADDR(x)	_SB_MAKEVALUE(x, S_IO_START_ADDR)
+#define G_IO_START_ADDR(x)	_SB_GETVALUE(x, S_IO_START_ADDR, M_IO_START_ADDR)
+
+#define S_IO_ADDRBASE		16	 /* # bits to shift addr for this reg */
+
+#define M_IO_BLK_CACHE		_SB_MAKEMASK1(15)
+
+
+/*
+ * Generic Bus Timing 0 Registers (Table 11-7)
+ */
+
+#define S_IO_ALE_WIDTH		0
+#define M_IO_ALE_WIDTH		_SB_MAKEMASK(3, S_IO_ALE_WIDTH)
+#define V_IO_ALE_WIDTH(x)	_SB_MAKEVALUE(x, S_IO_ALE_WIDTH)
+#define G_IO_ALE_WIDTH(x)	_SB_GETVALUE(x, S_IO_ALE_WIDTH, M_IO_ALE_WIDTH)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+    || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_IO_EARLY_CS	        _SB_MAKEMASK1(3)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_IO_ALE_TO_CS		4
+#define M_IO_ALE_TO_CS		_SB_MAKEMASK(2, S_IO_ALE_TO_CS)
+#define V_IO_ALE_TO_CS(x)	_SB_MAKEVALUE(x, S_IO_ALE_TO_CS)
+#define G_IO_ALE_TO_CS(x)	_SB_GETVALUE(x, S_IO_ALE_TO_CS, M_IO_ALE_TO_CS)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+    || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_IO_BURST_WIDTH           _SB_MAKE64(6)
+#define M_IO_BURST_WIDTH           _SB_MAKEMASK(2, S_IO_BURST_WIDTH)
+#define V_IO_BURST_WIDTH(x)        _SB_MAKEVALUE(x, S_IO_BURST_WIDTH)
+#define G_IO_BURST_WIDTH(x)        _SB_GETVALUE(x, S_IO_BURST_WIDTH, M_IO_BURST_WIDTH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_IO_CS_WIDTH		8
+#define M_IO_CS_WIDTH		_SB_MAKEMASK(5, S_IO_CS_WIDTH)
+#define V_IO_CS_WIDTH(x)	_SB_MAKEVALUE(x, S_IO_CS_WIDTH)
+#define G_IO_CS_WIDTH(x)	_SB_GETVALUE(x, S_IO_CS_WIDTH, M_IO_CS_WIDTH)
+
+#define S_IO_RDY_SMPLE		13
+#define M_IO_RDY_SMPLE		_SB_MAKEMASK(3, S_IO_RDY_SMPLE)
+#define V_IO_RDY_SMPLE(x)	_SB_MAKEVALUE(x, S_IO_RDY_SMPLE)
+#define G_IO_RDY_SMPLE(x)	_SB_GETVALUE(x, S_IO_RDY_SMPLE, M_IO_RDY_SMPLE)
+
+
+/*
+ * Generic Bus Timing 1 Registers (Table 11-8)
+ */
+
+#define S_IO_ALE_TO_WRITE	0
+#define M_IO_ALE_TO_WRITE	_SB_MAKEMASK(3, S_IO_ALE_TO_WRITE)
+#define V_IO_ALE_TO_WRITE(x)	_SB_MAKEVALUE(x, S_IO_ALE_TO_WRITE)
+#define G_IO_ALE_TO_WRITE(x)	_SB_GETVALUE(x, S_IO_ALE_TO_WRITE, M_IO_ALE_TO_WRITE)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+    || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_IO_RDY_SYNC	        _SB_MAKEMASK1(3)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_IO_WRITE_WIDTH	4
+#define M_IO_WRITE_WIDTH	_SB_MAKEMASK(4, S_IO_WRITE_WIDTH)
+#define V_IO_WRITE_WIDTH(x)	_SB_MAKEVALUE(x, S_IO_WRITE_WIDTH)
+#define G_IO_WRITE_WIDTH(x)	_SB_GETVALUE(x, S_IO_WRITE_WIDTH, M_IO_WRITE_WIDTH)
+
+#define S_IO_IDLE_CYCLE		8
+#define M_IO_IDLE_CYCLE		_SB_MAKEMASK(4, S_IO_IDLE_CYCLE)
+#define V_IO_IDLE_CYCLE(x)	_SB_MAKEVALUE(x, S_IO_IDLE_CYCLE)
+#define G_IO_IDLE_CYCLE(x)	_SB_GETVALUE(x, S_IO_IDLE_CYCLE, M_IO_IDLE_CYCLE)
+
+#define S_IO_OE_TO_CS		12
+#define M_IO_OE_TO_CS		_SB_MAKEMASK(2, S_IO_OE_TO_CS)
+#define V_IO_OE_TO_CS(x)	_SB_MAKEVALUE(x, S_IO_OE_TO_CS)
+#define G_IO_OE_TO_CS(x)	_SB_GETVALUE(x, S_IO_OE_TO_CS, M_IO_OE_TO_CS)
+
+#define S_IO_CS_TO_OE		14
+#define M_IO_CS_TO_OE		_SB_MAKEMASK(2, S_IO_CS_TO_OE)
+#define V_IO_CS_TO_OE(x)	_SB_MAKEVALUE(x, S_IO_CS_TO_OE)
+#define G_IO_CS_TO_OE(x)	_SB_GETVALUE(x, S_IO_CS_TO_OE, M_IO_CS_TO_OE)
+
+/*
+ * Generic Bus Interrupt Status Register (Table 11-9)
+ */
+
+#define M_IO_CS_ERR_INT		_SB_MAKEMASK(0, 8)
+#define M_IO_CS0_ERR_INT	_SB_MAKEMASK1(0)
+#define M_IO_CS1_ERR_INT	_SB_MAKEMASK1(1)
+#define M_IO_CS2_ERR_INT	_SB_MAKEMASK1(2)
+#define M_IO_CS3_ERR_INT	_SB_MAKEMASK1(3)
+#define M_IO_CS4_ERR_INT	_SB_MAKEMASK1(4)
+#define M_IO_CS5_ERR_INT	_SB_MAKEMASK1(5)
+#define M_IO_CS6_ERR_INT	_SB_MAKEMASK1(6)
+#define M_IO_CS7_ERR_INT	_SB_MAKEMASK1(7)
+
+#define M_IO_RD_PAR_INT		_SB_MAKEMASK1(9)
+#define M_IO_TIMEOUT_INT	_SB_MAKEMASK1(10)
+#define M_IO_ILL_ADDR_INT	_SB_MAKEMASK1(11)
+#define M_IO_MULT_CS_INT	_SB_MAKEMASK1(12)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_IO_COH_ERR	        _SB_MAKEMASK1(14)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/*
+ * Generic Bus Output Drive Control Register 0 (Table 14-18)
+ */
+
+#define S_IO_SLEW0		0
+#define M_IO_SLEW0		_SB_MAKEMASK(2, S_IO_SLEW0)
+#define V_IO_SLEW0(x)		_SB_MAKEVALUE(x, S_IO_SLEW0)
+#define G_IO_SLEW0(x)		_SB_GETVALUE(x, S_IO_SLEW0, M_IO_SLEW0)
+
+#define S_IO_DRV_A		2
+#define M_IO_DRV_A		_SB_MAKEMASK(2, S_IO_DRV_A)
+#define V_IO_DRV_A(x)		_SB_MAKEVALUE(x, S_IO_DRV_A)
+#define G_IO_DRV_A(x)		_SB_GETVALUE(x, S_IO_DRV_A, M_IO_DRV_A)
+
+#define S_IO_DRV_B		6
+#define M_IO_DRV_B		_SB_MAKEMASK(2, S_IO_DRV_B)
+#define V_IO_DRV_B(x)		_SB_MAKEVALUE(x, S_IO_DRV_B)
+#define G_IO_DRV_B(x)		_SB_GETVALUE(x, S_IO_DRV_B, M_IO_DRV_B)
+
+#define S_IO_DRV_C		10
+#define M_IO_DRV_C		_SB_MAKEMASK(2, S_IO_DRV_C)
+#define V_IO_DRV_C(x)		_SB_MAKEVALUE(x, S_IO_DRV_C)
+#define G_IO_DRV_C(x)		_SB_GETVALUE(x, S_IO_DRV_C, M_IO_DRV_C)
+
+#define S_IO_DRV_D		14
+#define M_IO_DRV_D		_SB_MAKEMASK(2, S_IO_DRV_D)
+#define V_IO_DRV_D(x)		_SB_MAKEVALUE(x, S_IO_DRV_D)
+#define G_IO_DRV_D(x)		_SB_GETVALUE(x, S_IO_DRV_D, M_IO_DRV_D)
+
+/*
+ * Generic Bus Output Drive Control Register 1 (Table 14-19)
+ */
+
+#define S_IO_DRV_E		2
+#define M_IO_DRV_E		_SB_MAKEMASK(2, S_IO_DRV_E)
+#define V_IO_DRV_E(x)		_SB_MAKEVALUE(x, S_IO_DRV_E)
+#define G_IO_DRV_E(x)		_SB_GETVALUE(x, S_IO_DRV_E, M_IO_DRV_E)
+
+#define S_IO_DRV_F		6
+#define M_IO_DRV_F		_SB_MAKEMASK(2, S_IO_DRV_F)
+#define V_IO_DRV_F(x)		_SB_MAKEVALUE(x, S_IO_DRV_F)
+#define G_IO_DRV_F(x)		_SB_GETVALUE(x, S_IO_DRV_F, M_IO_DRV_F)
+
+#define S_IO_SLEW1		8
+#define M_IO_SLEW1		_SB_MAKEMASK(2, S_IO_SLEW1)
+#define V_IO_SLEW1(x)		_SB_MAKEVALUE(x, S_IO_SLEW1)
+#define G_IO_SLEW1(x)		_SB_GETVALUE(x, S_IO_SLEW1, M_IO_SLEW1)
+
+#define S_IO_DRV_G		10
+#define M_IO_DRV_G		_SB_MAKEMASK(2, S_IO_DRV_G)
+#define V_IO_DRV_G(x)		_SB_MAKEVALUE(x, S_IO_DRV_G)
+#define G_IO_DRV_G(x)		_SB_GETVALUE(x, S_IO_DRV_G, M_IO_DRV_G)
+
+#define S_IO_SLEW2		12
+#define M_IO_SLEW2		_SB_MAKEMASK(2, S_IO_SLEW2)
+#define V_IO_SLEW2(x)		_SB_MAKEVALUE(x, S_IO_SLEW2)
+#define G_IO_SLEW2(x)		_SB_GETVALUE(x, S_IO_SLEW2, M_IO_SLEW2)
+
+#define S_IO_DRV_H		14
+#define M_IO_DRV_H		_SB_MAKEMASK(2, S_IO_DRV_H)
+#define V_IO_DRV_H(x)		_SB_MAKEVALUE(x, S_IO_DRV_H)
+#define G_IO_DRV_H(x)		_SB_GETVALUE(x, S_IO_DRV_H, M_IO_DRV_H)
+
+/*
+ * Generic Bus Output Drive Control Register 2 (Table 14-20)
+ */
+
+#define S_IO_DRV_J		2
+#define M_IO_DRV_J		_SB_MAKEMASK(2, S_IO_DRV_J)
+#define V_IO_DRV_J(x)		_SB_MAKEVALUE(x, S_IO_DRV_J)
+#define G_IO_DRV_J(x)		_SB_GETVALUE(x, S_IO_DRV_J, M_IO_DRV_J)
+
+#define S_IO_DRV_K		6
+#define M_IO_DRV_K		_SB_MAKEMASK(2, S_IO_DRV_K)
+#define V_IO_DRV_K(x)		_SB_MAKEVALUE(x, S_IO_DRV_K)
+#define G_IO_DRV_K(x)		_SB_GETVALUE(x, S_IO_DRV_K, M_IO_DRV_K)
+
+#define S_IO_DRV_L		10
+#define M_IO_DRV_L		_SB_MAKEMASK(2, S_IO_DRV_L)
+#define V_IO_DRV_L(x)		_SB_MAKEVALUE(x, S_IO_DRV_L)
+#define G_IO_DRV_L(x)		_SB_GETVALUE(x, S_IO_DRV_L, M_IO_DRV_L)
+
+#define S_IO_DRV_M		14
+#define M_IO_DRV_M		_SB_MAKEMASK(2, S_IO_DRV_M)
+#define V_IO_DRV_M(x)		_SB_MAKEVALUE(x, S_IO_DRV_M)
+#define G_IO_DRV_M(x)		_SB_GETVALUE(x, S_IO_DRV_M, M_IO_DRV_M)
+
+/*
+ * Generic Bus Output Drive Control Register 3 (Table 14-21)
+ */
+
+#define S_IO_SLEW3		0
+#define M_IO_SLEW3		_SB_MAKEMASK(2, S_IO_SLEW3)
+#define V_IO_SLEW3(x)		_SB_MAKEVALUE(x, S_IO_SLEW3)
+#define G_IO_SLEW3(x)		_SB_GETVALUE(x, S_IO_SLEW3, M_IO_SLEW3)
+
+#define S_IO_DRV_N		2
+#define M_IO_DRV_N		_SB_MAKEMASK(2, S_IO_DRV_N)
+#define V_IO_DRV_N(x)		_SB_MAKEVALUE(x, S_IO_DRV_N)
+#define G_IO_DRV_N(x)		_SB_GETVALUE(x, S_IO_DRV_N, M_IO_DRV_N)
+
+#define S_IO_DRV_P		6
+#define M_IO_DRV_P		_SB_MAKEMASK(2, S_IO_DRV_P)
+#define V_IO_DRV_P(x)		_SB_MAKEVALUE(x, S_IO_DRV_P)
+#define G_IO_DRV_P(x)		_SB_GETVALUE(x, S_IO_DRV_P, M_IO_DRV_P)
+
+#define S_IO_DRV_Q		10
+#define M_IO_DRV_Q		_SB_MAKEMASK(2, S_IO_DRV_Q)
+#define V_IO_DRV_Q(x)		_SB_MAKEVALUE(x, S_IO_DRV_Q)
+#define G_IO_DRV_Q(x)		_SB_GETVALUE(x, S_IO_DRV_Q, M_IO_DRV_Q)
+
+#define S_IO_DRV_R		14
+#define M_IO_DRV_R		_SB_MAKEMASK(2, S_IO_DRV_R)
+#define V_IO_DRV_R(x)		_SB_MAKEVALUE(x, S_IO_DRV_R)
+#define G_IO_DRV_R(x)		_SB_GETVALUE(x, S_IO_DRV_R, M_IO_DRV_R)
+
+
+/*
+ * PCMCIA configuration register (Table 12-6)
+ */
+
+#define M_PCMCIA_CFG_ATTRMEM	_SB_MAKEMASK1(0)
+#define M_PCMCIA_CFG_3VEN	_SB_MAKEMASK1(1)
+#define M_PCMCIA_CFG_5VEN	_SB_MAKEMASK1(2)
+#define M_PCMCIA_CFG_VPPEN	_SB_MAKEMASK1(3)
+#define M_PCMCIA_CFG_RESET	_SB_MAKEMASK1(4)
+#define M_PCMCIA_CFG_APWRONEN	_SB_MAKEMASK1(5)
+#define M_PCMCIA_CFG_CDMASK	_SB_MAKEMASK1(6)
+#define M_PCMCIA_CFG_WPMASK	_SB_MAKEMASK1(7)
+#define M_PCMCIA_CFG_RDYMASK	_SB_MAKEMASK1(8)
+#define M_PCMCIA_CFG_PWRCTL	_SB_MAKEMASK1(9)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_PCMCIA_MODE		16
+#define M_PCMCIA_MODE		_SB_MAKEMASK(3, S_PCMCIA_MODE)
+#define V_PCMCIA_MODE(x)	_SB_MAKEVALUE(x, S_PCMCIA_MODE)
+#define G_PCMCIA_MODE(x)	_SB_GETVALUE(x, S_PCMCIA_MODE, M_PCMCIA_MODE)
+
+#define K_PCMCIA_MODE_PCMA_NOB	0	/* standard PCMCIA "A", no "B" */
+#define K_PCMCIA_MODE_IDEA_NOB	1	/* IDE "A", no "B" */
+#define K_PCMCIA_MODE_PCMIOA_NOB 2	/* PCMCIA with I/O "A", no "B" */
+#define K_PCMCIA_MODE_PCMA_PCMB 4	/* standard PCMCIA "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_IDEA_PCMB 5	/* IDE "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_PCMA_IDEB 6	/* standard PCMCIA "A", IDE "B" */
+#define K_PCMCIA_MODE_IDEA_IDEB 7	/* IDE "A", IDE "B" */
+#endif
+
+
+/*
+ * PCMCIA status register (Table 12-7)
+ */
+
+#define M_PCMCIA_STATUS_CD1	_SB_MAKEMASK1(0)
+#define M_PCMCIA_STATUS_CD2	_SB_MAKEMASK1(1)
+#define M_PCMCIA_STATUS_VS1	_SB_MAKEMASK1(2)
+#define M_PCMCIA_STATUS_VS2	_SB_MAKEMASK1(3)
+#define M_PCMCIA_STATUS_WP	_SB_MAKEMASK1(4)
+#define M_PCMCIA_STATUS_RDY	_SB_MAKEMASK1(5)
+#define M_PCMCIA_STATUS_3VEN	_SB_MAKEMASK1(6)
+#define M_PCMCIA_STATUS_5VEN	_SB_MAKEMASK1(7)
+#define M_PCMCIA_STATUS_CDCHG	_SB_MAKEMASK1(8)
+#define M_PCMCIA_STATUS_WPCHG	_SB_MAKEMASK1(9)
+#define M_PCMCIA_STATUS_RDYCHG	_SB_MAKEMASK1(10)
+
+/*
+ * GPIO Interrupt Type Register (table 13-3)
+ */
+
+#define K_GPIO_INTR_DISABLE	0
+#define K_GPIO_INTR_EDGE	1
+#define K_GPIO_INTR_LEVEL	2
+#define K_GPIO_INTR_SPLIT	3
+
+#define S_GPIO_INTR_TYPEX(n)	(((n)/2)*2)
+#define M_GPIO_INTR_TYPEX(n)	_SB_MAKEMASK(2, S_GPIO_INTR_TYPEX(n))
+#define V_GPIO_INTR_TYPEX(n, x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPEX(n))
+#define G_GPIO_INTR_TYPEX(n, x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPEX(n), M_GPIO_INTR_TYPEX(n))
+
+#define S_GPIO_INTR_TYPE0	0
+#define M_GPIO_INTR_TYPE0	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE0)
+#define V_GPIO_INTR_TYPE0(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE0)
+#define G_GPIO_INTR_TYPE0(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE0, M_GPIO_INTR_TYPE0)
+
+#define S_GPIO_INTR_TYPE2	2
+#define M_GPIO_INTR_TYPE2	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE2)
+#define V_GPIO_INTR_TYPE2(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE2)
+#define G_GPIO_INTR_TYPE2(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE2, M_GPIO_INTR_TYPE2)
+
+#define S_GPIO_INTR_TYPE4	4
+#define M_GPIO_INTR_TYPE4	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE4)
+#define V_GPIO_INTR_TYPE4(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE4)
+#define G_GPIO_INTR_TYPE4(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE4, M_GPIO_INTR_TYPE4)
+
+#define S_GPIO_INTR_TYPE6	6
+#define M_GPIO_INTR_TYPE6	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE6)
+#define V_GPIO_INTR_TYPE6(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE6)
+#define G_GPIO_INTR_TYPE6(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE6, M_GPIO_INTR_TYPE6)
+
+#define S_GPIO_INTR_TYPE8	8
+#define M_GPIO_INTR_TYPE8	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE8)
+#define V_GPIO_INTR_TYPE8(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE8)
+#define G_GPIO_INTR_TYPE8(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE8, M_GPIO_INTR_TYPE8)
+
+#define S_GPIO_INTR_TYPE10	10
+#define M_GPIO_INTR_TYPE10	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE10)
+#define V_GPIO_INTR_TYPE10(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE10)
+#define G_GPIO_INTR_TYPE10(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE10, M_GPIO_INTR_TYPE10)
+
+#define S_GPIO_INTR_TYPE12	12
+#define M_GPIO_INTR_TYPE12	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE12)
+#define V_GPIO_INTR_TYPE12(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE12)
+#define G_GPIO_INTR_TYPE12(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE12, M_GPIO_INTR_TYPE12)
+
+#define S_GPIO_INTR_TYPE14	14
+#define M_GPIO_INTR_TYPE14	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE14)
+#define V_GPIO_INTR_TYPE14(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE14)
+#define G_GPIO_INTR_TYPE14(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE14, M_GPIO_INTR_TYPE14)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+
+/*
+ * GPIO Interrupt Additional Type Register
+ */
+
+#define K_GPIO_INTR_BOTHEDGE	0
+#define K_GPIO_INTR_RISEEDGE	1
+#define K_GPIO_INTR_UNPRED1	2
+#define K_GPIO_INTR_UNPRED2	3
+
+#define S_GPIO_INTR_ATYPEX(n)	(((n)/2)*2)
+#define M_GPIO_INTR_ATYPEX(n)	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPEX(n))
+#define V_GPIO_INTR_ATYPEX(n, x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPEX(n))
+#define G_GPIO_INTR_ATYPEX(n, x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPEX(n), M_GPIO_INTR_ATYPEX(n))
+
+#define S_GPIO_INTR_ATYPE0	0
+#define M_GPIO_INTR_ATYPE0	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE0)
+#define V_GPIO_INTR_ATYPE0(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE0)
+#define G_GPIO_INTR_ATYPE0(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE0, M_GPIO_INTR_ATYPE0)
+
+#define S_GPIO_INTR_ATYPE2	2
+#define M_GPIO_INTR_ATYPE2	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE2)
+#define V_GPIO_INTR_ATYPE2(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE2)
+#define G_GPIO_INTR_ATYPE2(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE2, M_GPIO_INTR_ATYPE2)
+
+#define S_GPIO_INTR_ATYPE4	4
+#define M_GPIO_INTR_ATYPE4	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE4)
+#define V_GPIO_INTR_ATYPE4(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE4)
+#define G_GPIO_INTR_ATYPE4(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE4, M_GPIO_INTR_ATYPE4)
+
+#define S_GPIO_INTR_ATYPE6	6
+#define M_GPIO_INTR_ATYPE6	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE6)
+#define V_GPIO_INTR_ATYPE6(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE6)
+#define G_GPIO_INTR_ATYPE6(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE6, M_GPIO_INTR_ATYPE6)
+
+#define S_GPIO_INTR_ATYPE8	8
+#define M_GPIO_INTR_ATYPE8	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE8)
+#define V_GPIO_INTR_ATYPE8(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE8)
+#define G_GPIO_INTR_ATYPE8(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE8, M_GPIO_INTR_ATYPE8)
+
+#define S_GPIO_INTR_ATYPE10	10
+#define M_GPIO_INTR_ATYPE10	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE10)
+#define V_GPIO_INTR_ATYPE10(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE10)
+#define G_GPIO_INTR_ATYPE10(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE10, M_GPIO_INTR_ATYPE10)
+
+#define S_GPIO_INTR_ATYPE12	12
+#define M_GPIO_INTR_ATYPE12	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE12)
+#define V_GPIO_INTR_ATYPE12(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE12)
+#define G_GPIO_INTR_ATYPE12(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE12, M_GPIO_INTR_ATYPE12)
+
+#define S_GPIO_INTR_ATYPE14	14
+#define M_GPIO_INTR_ATYPE14	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE14)
+#define V_GPIO_INTR_ATYPE14(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE14)
+#define G_GPIO_INTR_ATYPE14(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE14, M_GPIO_INTR_ATYPE14)
+#endif
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_int.h b/arch/mips/include/asm/sibyte/sb1250_int.h
new file mode 100644
index 0000000..f2850b4
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_int.h
@@ -0,0 +1,248 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Interrupt Mapper definitions		File: sb1250_int.h
+    *
+    *  This module contains constants for manipulating the SB1250's
+    *  interrupt mapper and definitions for the interrupt sources.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000, 2001, 2002, 2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_INT_H
+#define _SB1250_INT_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Interrupt Mapper Constants
+    ********************************************************************* */
+
+/*
+ * Interrupt sources (Table 4-8, UM 0.2)
+ *
+ * First, the interrupt numbers.
+ */
+
+#define K_INT_SOURCES               64
+
+#define K_INT_WATCHDOG_TIMER_0      0
+#define K_INT_WATCHDOG_TIMER_1      1
+#define K_INT_TIMER_0               2
+#define K_INT_TIMER_1               3
+#define K_INT_TIMER_2               4
+#define K_INT_TIMER_3               5
+#define K_INT_SMB_0                 6
+#define K_INT_SMB_1                 7
+#define K_INT_UART_0                8
+#define K_INT_UART_1                9
+#define K_INT_SER_0                 10
+#define K_INT_SER_1                 11
+#define K_INT_PCMCIA                12
+#define K_INT_ADDR_TRAP             13
+#define K_INT_PERF_CNT              14
+#define K_INT_TRACE_FREEZE          15
+#define K_INT_BAD_ECC               16
+#define K_INT_COR_ECC               17
+#define K_INT_IO_BUS                18
+#define K_INT_MAC_0                 19
+#define K_INT_MAC_1                 20
+#define K_INT_MAC_2                 21
+#define K_INT_DM_CH_0               22
+#define K_INT_DM_CH_1               23
+#define K_INT_DM_CH_2               24
+#define K_INT_DM_CH_3               25
+#define K_INT_MBOX_0                26
+#define K_INT_MBOX_1                27
+#define K_INT_MBOX_2                28
+#define K_INT_MBOX_3                29
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define K_INT_CYCLE_CP0_INT	    30
+#define K_INT_CYCLE_CP1_INT	    31
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define K_INT_GPIO_0                32
+#define K_INT_GPIO_1                33
+#define K_INT_GPIO_2                34
+#define K_INT_GPIO_3                35
+#define K_INT_GPIO_4                36
+#define K_INT_GPIO_5                37
+#define K_INT_GPIO_6                38
+#define K_INT_GPIO_7                39
+#define K_INT_GPIO_8                40
+#define K_INT_GPIO_9                41
+#define K_INT_GPIO_10               42
+#define K_INT_GPIO_11               43
+#define K_INT_GPIO_12               44
+#define K_INT_GPIO_13               45
+#define K_INT_GPIO_14               46
+#define K_INT_GPIO_15               47
+#define K_INT_LDT_FATAL             48
+#define K_INT_LDT_NONFATAL          49
+#define K_INT_LDT_SMI               50
+#define K_INT_LDT_NMI               51
+#define K_INT_LDT_INIT              52
+#define K_INT_LDT_STARTUP           53
+#define K_INT_LDT_EXT               54
+#define K_INT_PCI_ERROR             55
+#define K_INT_PCI_INTA              56
+#define K_INT_PCI_INTB              57
+#define K_INT_PCI_INTC              58
+#define K_INT_PCI_INTD              59
+#define K_INT_SPARE_2               60
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define K_INT_MAC_0_CH1		    61
+#define K_INT_MAC_1_CH1		    62
+#define K_INT_MAC_2_CH1		    63
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/*
+ * Mask values for each interrupt
+ */
+
+#define M_INT_WATCHDOG_TIMER_0      _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0)
+#define M_INT_WATCHDOG_TIMER_1      _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1)
+#define M_INT_TIMER_0               _SB_MAKEMASK1(K_INT_TIMER_0)
+#define M_INT_TIMER_1               _SB_MAKEMASK1(K_INT_TIMER_1)
+#define M_INT_TIMER_2               _SB_MAKEMASK1(K_INT_TIMER_2)
+#define M_INT_TIMER_3               _SB_MAKEMASK1(K_INT_TIMER_3)
+#define M_INT_SMB_0                 _SB_MAKEMASK1(K_INT_SMB_0)
+#define M_INT_SMB_1                 _SB_MAKEMASK1(K_INT_SMB_1)
+#define M_INT_UART_0                _SB_MAKEMASK1(K_INT_UART_0)
+#define M_INT_UART_1                _SB_MAKEMASK1(K_INT_UART_1)
+#define M_INT_SER_0                 _SB_MAKEMASK1(K_INT_SER_0)
+#define M_INT_SER_1                 _SB_MAKEMASK1(K_INT_SER_1)
+#define M_INT_PCMCIA                _SB_MAKEMASK1(K_INT_PCMCIA)
+#define M_INT_ADDR_TRAP             _SB_MAKEMASK1(K_INT_ADDR_TRAP)
+#define M_INT_PERF_CNT              _SB_MAKEMASK1(K_INT_PERF_CNT)
+#define M_INT_TRACE_FREEZE          _SB_MAKEMASK1(K_INT_TRACE_FREEZE)
+#define M_INT_BAD_ECC               _SB_MAKEMASK1(K_INT_BAD_ECC)
+#define M_INT_COR_ECC               _SB_MAKEMASK1(K_INT_COR_ECC)
+#define M_INT_IO_BUS                _SB_MAKEMASK1(K_INT_IO_BUS)
+#define M_INT_MAC_0                 _SB_MAKEMASK1(K_INT_MAC_0)
+#define M_INT_MAC_1                 _SB_MAKEMASK1(K_INT_MAC_1)
+#define M_INT_MAC_2                 _SB_MAKEMASK1(K_INT_MAC_2)
+#define M_INT_DM_CH_0               _SB_MAKEMASK1(K_INT_DM_CH_0)
+#define M_INT_DM_CH_1               _SB_MAKEMASK1(K_INT_DM_CH_1)
+#define M_INT_DM_CH_2               _SB_MAKEMASK1(K_INT_DM_CH_2)
+#define M_INT_DM_CH_3               _SB_MAKEMASK1(K_INT_DM_CH_3)
+#define M_INT_MBOX_0                _SB_MAKEMASK1(K_INT_MBOX_0)
+#define M_INT_MBOX_1                _SB_MAKEMASK1(K_INT_MBOX_1)
+#define M_INT_MBOX_2                _SB_MAKEMASK1(K_INT_MBOX_2)
+#define M_INT_MBOX_3                _SB_MAKEMASK1(K_INT_MBOX_3)
+#define M_INT_MBOX_ALL              _SB_MAKEMASK(4, K_INT_MBOX_0)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_INT_CYCLE_CP0_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT)
+#define M_INT_CYCLE_CP1_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define M_INT_GPIO_0                _SB_MAKEMASK1(K_INT_GPIO_0)
+#define M_INT_GPIO_1                _SB_MAKEMASK1(K_INT_GPIO_1)
+#define M_INT_GPIO_2                _SB_MAKEMASK1(K_INT_GPIO_2)
+#define M_INT_GPIO_3                _SB_MAKEMASK1(K_INT_GPIO_3)
+#define M_INT_GPIO_4                _SB_MAKEMASK1(K_INT_GPIO_4)
+#define M_INT_GPIO_5                _SB_MAKEMASK1(K_INT_GPIO_5)
+#define M_INT_GPIO_6                _SB_MAKEMASK1(K_INT_GPIO_6)
+#define M_INT_GPIO_7                _SB_MAKEMASK1(K_INT_GPIO_7)
+#define M_INT_GPIO_8                _SB_MAKEMASK1(K_INT_GPIO_8)
+#define M_INT_GPIO_9                _SB_MAKEMASK1(K_INT_GPIO_9)
+#define M_INT_GPIO_10               _SB_MAKEMASK1(K_INT_GPIO_10)
+#define M_INT_GPIO_11               _SB_MAKEMASK1(K_INT_GPIO_11)
+#define M_INT_GPIO_12               _SB_MAKEMASK1(K_INT_GPIO_12)
+#define M_INT_GPIO_13               _SB_MAKEMASK1(K_INT_GPIO_13)
+#define M_INT_GPIO_14               _SB_MAKEMASK1(K_INT_GPIO_14)
+#define M_INT_GPIO_15               _SB_MAKEMASK1(K_INT_GPIO_15)
+#define M_INT_LDT_FATAL             _SB_MAKEMASK1(K_INT_LDT_FATAL)
+#define M_INT_LDT_NONFATAL          _SB_MAKEMASK1(K_INT_LDT_NONFATAL)
+#define M_INT_LDT_SMI               _SB_MAKEMASK1(K_INT_LDT_SMI)
+#define M_INT_LDT_NMI               _SB_MAKEMASK1(K_INT_LDT_NMI)
+#define M_INT_LDT_INIT              _SB_MAKEMASK1(K_INT_LDT_INIT)
+#define M_INT_LDT_STARTUP           _SB_MAKEMASK1(K_INT_LDT_STARTUP)
+#define M_INT_LDT_EXT               _SB_MAKEMASK1(K_INT_LDT_EXT)
+#define M_INT_PCI_ERROR             _SB_MAKEMASK1(K_INT_PCI_ERROR)
+#define M_INT_PCI_INTA              _SB_MAKEMASK1(K_INT_PCI_INTA)
+#define M_INT_PCI_INTB              _SB_MAKEMASK1(K_INT_PCI_INTB)
+#define M_INT_PCI_INTC              _SB_MAKEMASK1(K_INT_PCI_INTC)
+#define M_INT_PCI_INTD              _SB_MAKEMASK1(K_INT_PCI_INTD)
+#define M_INT_SPARE_2               _SB_MAKEMASK1(K_INT_SPARE_2)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_INT_MAC_0_CH1		    _SB_MAKEMASK1(K_INT_MAC_0_CH1)
+#define M_INT_MAC_1_CH1		    _SB_MAKEMASK1(K_INT_MAC_1_CH1)
+#define M_INT_MAC_2_CH1		    _SB_MAKEMASK1(K_INT_MAC_2_CH1)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/*
+ * Interrupt mappings
+ */
+
+#define K_INT_MAP_I0	0		/* interrupt pins on processor */
+#define K_INT_MAP_I1	1
+#define K_INT_MAP_I2	2
+#define K_INT_MAP_I3	3
+#define K_INT_MAP_I4	4
+#define K_INT_MAP_I5	5
+#define K_INT_MAP_NMI	6		/* nonmaskable */
+#define K_INT_MAP_DINT	7		/* debug interrupt */
+
+/*
+ * LDT Interrupt Set Register (table 4-5)
+ */
+
+#define S_INT_LDT_INTMSG	      0
+#define M_INT_LDT_INTMSG              _SB_MAKEMASK(3, S_INT_LDT_INTMSG)
+#define V_INT_LDT_INTMSG(x)           _SB_MAKEVALUE(x, S_INT_LDT_INTMSG)
+#define G_INT_LDT_INTMSG(x)           _SB_GETVALUE(x, S_INT_LDT_INTMSG, M_INT_LDT_INTMSG)
+
+#define K_INT_LDT_INTMSG_FIXED	      0
+#define K_INT_LDT_INTMSG_ARBITRATED   1
+#define K_INT_LDT_INTMSG_SMI	      2
+#define K_INT_LDT_INTMSG_NMI	      3
+#define K_INT_LDT_INTMSG_INIT	      4
+#define K_INT_LDT_INTMSG_STARTUP      5
+#define K_INT_LDT_INTMSG_EXTINT	      6
+#define K_INT_LDT_INTMSG_RESERVED     7
+
+#define M_INT_LDT_EDGETRIGGER         0
+#define M_INT_LDT_LEVELTRIGGER        _SB_MAKEMASK1(3)
+
+#define M_INT_LDT_PHYSICALDEST        0
+#define M_INT_LDT_LOGICALDEST         _SB_MAKEMASK1(4)
+
+#define S_INT_LDT_INTDEST             5
+#define M_INT_LDT_INTDEST             _SB_MAKEMASK(10, S_INT_LDT_INTDEST)
+#define V_INT_LDT_INTDEST(x)          _SB_MAKEVALUE(x, S_INT_LDT_INTDEST)
+#define G_INT_LDT_INTDEST(x)          _SB_GETVALUE(x, S_INT_LDT_INTDEST, M_INT_LDT_INTDEST)
+
+#define S_INT_LDT_VECTOR              13
+#define M_INT_LDT_VECTOR              _SB_MAKEMASK(8, S_INT_LDT_VECTOR)
+#define V_INT_LDT_VECTOR(x)           _SB_MAKEVALUE(x, S_INT_LDT_VECTOR)
+#define G_INT_LDT_VECTOR(x)           _SB_GETVALUE(x, S_INT_LDT_VECTOR, M_INT_LDT_VECTOR)
+
+/*
+ * Vector format (Table 4-6)
+ */
+
+#define M_LDTVECT_RAISEINT		0x00
+#define M_LDTVECT_RAISEMBOX             0x40
+
+
+#endif	/* 1250/112x */
diff --git a/arch/mips/include/asm/sibyte/sb1250_l2c.h b/arch/mips/include/asm/sibyte/sb1250_l2c.h
new file mode 100644
index 0000000..6554dcf
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_l2c.h
@@ -0,0 +1,131 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  L2 Cache constants and macros		File: sb1250_l2c.h
+    *
+    *  This module contains constants useful for manipulating the
+    *  level 2 cache.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_L2C_H
+#define _SB1250_L2C_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Level 2 Cache Tag register (Table 5-3)
+ */
+
+#define S_L2C_TAG_MBZ               0
+#define M_L2C_TAG_MBZ               _SB_MAKEMASK(5, S_L2C_TAG_MBZ)
+
+#define S_L2C_TAG_INDEX             5
+#define M_L2C_TAG_INDEX             _SB_MAKEMASK(12, S_L2C_TAG_INDEX)
+#define V_L2C_TAG_INDEX(x)          _SB_MAKEVALUE(x, S_L2C_TAG_INDEX)
+#define G_L2C_TAG_INDEX(x)          _SB_GETVALUE(x, S_L2C_TAG_INDEX, M_L2C_TAG_INDEX)
+
+#define S_L2C_TAG_TAG               17
+#define M_L2C_TAG_TAG               _SB_MAKEMASK(23, S_L2C_TAG_TAG)
+#define V_L2C_TAG_TAG(x)            _SB_MAKEVALUE(x, S_L2C_TAG_TAG)
+#define G_L2C_TAG_TAG(x)            _SB_GETVALUE(x, S_L2C_TAG_TAG, M_L2C_TAG_TAG)
+
+#define S_L2C_TAG_ECC               40
+#define M_L2C_TAG_ECC               _SB_MAKEMASK(6, S_L2C_TAG_ECC)
+#define V_L2C_TAG_ECC(x)            _SB_MAKEVALUE(x, S_L2C_TAG_ECC)
+#define G_L2C_TAG_ECC(x)            _SB_GETVALUE(x, S_L2C_TAG_ECC, M_L2C_TAG_ECC)
+
+#define S_L2C_TAG_WAY               46
+#define M_L2C_TAG_WAY               _SB_MAKEMASK(2, S_L2C_TAG_WAY)
+#define V_L2C_TAG_WAY(x)            _SB_MAKEVALUE(x, S_L2C_TAG_WAY)
+#define G_L2C_TAG_WAY(x)            _SB_GETVALUE(x, S_L2C_TAG_WAY, M_L2C_TAG_WAY)
+
+#define M_L2C_TAG_DIRTY             _SB_MAKEMASK1(48)
+#define M_L2C_TAG_VALID             _SB_MAKEMASK1(49)
+
+/*
+ * Format of level 2 cache management address (table 5-2)
+ */
+
+#define S_L2C_MGMT_INDEX            5
+#define M_L2C_MGMT_INDEX            _SB_MAKEMASK(12, S_L2C_MGMT_INDEX)
+#define V_L2C_MGMT_INDEX(x)         _SB_MAKEVALUE(x, S_L2C_MGMT_INDEX)
+#define G_L2C_MGMT_INDEX(x)         _SB_GETVALUE(x, S_L2C_MGMT_INDEX, M_L2C_MGMT_INDEX)
+
+#define S_L2C_MGMT_QUADRANT         15
+#define M_L2C_MGMT_QUADRANT         _SB_MAKEMASK(2, S_L2C_MGMT_QUADRANT)
+#define V_L2C_MGMT_QUADRANT(x)      _SB_MAKEVALUE(x, S_L2C_MGMT_QUADRANT)
+#define G_L2C_MGMT_QUADRANT(x)      _SB_GETVALUE(x, S_L2C_MGMT_QUADRANT, M_L2C_MGMT_QUADRANT)
+
+#define S_L2C_MGMT_HALF		    16
+#define M_L2C_MGMT_HALF	            _SB_MAKEMASK(1, S_L2C_MGMT_HALF)
+
+#define S_L2C_MGMT_WAY              17
+#define M_L2C_MGMT_WAY              _SB_MAKEMASK(2, S_L2C_MGMT_WAY)
+#define V_L2C_MGMT_WAY(x)           _SB_MAKEVALUE(x, S_L2C_MGMT_WAY)
+#define G_L2C_MGMT_WAY(x)           _SB_GETVALUE(x, S_L2C_MGMT_WAY, M_L2C_MGMT_WAY)
+
+#define S_L2C_MGMT_ECC_DIAG         21
+#define M_L2C_MGMT_ECC_DIAG         _SB_MAKEMASK(2, S_L2C_MGMT_ECC_DIAG)
+#define V_L2C_MGMT_ECC_DIAG(x)      _SB_MAKEVALUE(x, S_L2C_MGMT_ECC_DIAG)
+#define G_L2C_MGMT_ECC_DIAG(x)      _SB_GETVALUE(x, S_L2C_MGMT_ECC_DIAG, M_L2C_MGMT_ECC_DIAG)
+
+#define S_L2C_MGMT_TAG              23
+#define M_L2C_MGMT_TAG              _SB_MAKEMASK(4, S_L2C_MGMT_TAG)
+#define V_L2C_MGMT_TAG(x)           _SB_MAKEVALUE(x, S_L2C_MGMT_TAG)
+#define G_L2C_MGMT_TAG(x)           _SB_GETVALUE(x, S_L2C_MGMT_TAG, M_L2C_MGMT_TAG)
+
+#define M_L2C_MGMT_DIRTY            _SB_MAKEMASK1(19)
+#define M_L2C_MGMT_VALID            _SB_MAKEMASK1(20)
+
+#define A_L2C_MGMT_TAG_BASE         0x00D0000000
+
+#define L2C_ENTRIES_PER_WAY       4096
+#define L2C_NUM_WAYS              4
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * L2 Read Misc. register (A_L2_READ_MISC)
+ */
+#define S_L2C_MISC_NO_WAY		10
+#define M_L2C_MISC_NO_WAY		_SB_MAKEMASK(4, S_L2C_MISC_NO_WAY)
+#define V_L2C_MISC_NO_WAY(x)		_SB_MAKEVALUE(x, S_L2C_MISC_NO_WAY)
+#define G_L2C_MISC_NO_WAY(x)		_SB_GETVALUE(x, S_L2C_MISC_NO_WAY, M_L2C_MISC_NO_WAY)
+
+#define M_L2C_MISC_ECC_CLEANUP_DIS	_SB_MAKEMASK1(9)
+#define M_L2C_MISC_MC_PRIO_LOW		_SB_MAKEMASK1(8)
+#define M_L2C_MISC_SOFT_DISABLE_T	_SB_MAKEMASK1(7)
+#define M_L2C_MISC_SOFT_DISABLE_B	_SB_MAKEMASK1(6)
+#define M_L2C_MISC_SOFT_DISABLE_R	_SB_MAKEMASK1(5)
+#define M_L2C_MISC_SOFT_DISABLE_L	_SB_MAKEMASK1(4)
+#define M_L2C_MISC_SCACHE_DISABLE_T	_SB_MAKEMASK1(3)
+#define M_L2C_MISC_SCACHE_DISABLE_B	_SB_MAKEMASK1(2)
+#define M_L2C_MISC_SCACHE_DISABLE_R	_SB_MAKEMASK1(1)
+#define M_L2C_MISC_SCACHE_DISABLE_L	_SB_MAKEMASK1(0)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_ldt.h b/arch/mips/include/asm/sibyte/sb1250_ldt.h
new file mode 100644
index 0000000..081e8b1
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_ldt.h
@@ -0,0 +1,423 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  LDT constants				File: sb1250_ldt.h
+    *
+    *  This module contains constants and macros to describe
+    *  the LDT interface on the SB1250.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000, 2001, 2002, 2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_LDT_H
+#define _SB1250_LDT_H
+
+#include "sb1250_defs.h"
+
+#define K_LDT_VENDOR_SIBYTE	0x166D
+#define K_LDT_DEVICE_SB1250	0x0002
+
+/*
+ * LDT Interface Type 1 (bridge) configuration header
+ */
+
+#define R_LDT_TYPE1_DEVICEID	0x0000
+#define R_LDT_TYPE1_CMDSTATUS	0x0004
+#define R_LDT_TYPE1_CLASSREV	0x0008
+#define R_LDT_TYPE1_DEVHDR	0x000C
+#define R_LDT_TYPE1_BAR0	0x0010	/* not used */
+#define R_LDT_TYPE1_BAR1	0x0014	/* not used */
+
+#define R_LDT_TYPE1_BUSID	0x0018	/* bus ID register */
+#define R_LDT_TYPE1_SECSTATUS	0x001C	/* secondary status / I/O base/limit */
+#define R_LDT_TYPE1_MEMLIMIT	0x0020
+#define R_LDT_TYPE1_PREFETCH	0x0024
+#define R_LDT_TYPE1_PREF_BASE	0x0028
+#define R_LDT_TYPE1_PREF_LIMIT	0x002C
+#define R_LDT_TYPE1_IOLIMIT	0x0030
+#define R_LDT_TYPE1_CAPPTR	0x0034
+#define R_LDT_TYPE1_ROMADDR	0x0038
+#define R_LDT_TYPE1_BRCTL	0x003C
+#define R_LDT_TYPE1_CMD		0x0040
+#define R_LDT_TYPE1_LINKCTRL	0x0044
+#define R_LDT_TYPE1_LINKFREQ	0x0048
+#define R_LDT_TYPE1_RESERVED1	0x004C
+#define R_LDT_TYPE1_SRICMD	0x0050
+#define R_LDT_TYPE1_SRITXNUM	0x0054
+#define R_LDT_TYPE1_SRIRXNUM	0x0058
+#define R_LDT_TYPE1_ERRSTATUS   0x0068
+#define R_LDT_TYPE1_SRICTRL	0x006C
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_LDT_TYPE1_ADDSTATUS	0x0070
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define R_LDT_TYPE1_TXBUFCNT	0x00C8
+#define R_LDT_TYPE1_EXPCRC	0x00DC
+#define R_LDT_TYPE1_RXCRC	0x00F0
+
+
+/*
+ * LDT Device ID register
+ */
+
+#define S_LDT_DEVICEID_VENDOR		0
+#define M_LDT_DEVICEID_VENDOR		_SB_MAKEMASK_32(16, S_LDT_DEVICEID_VENDOR)
+#define V_LDT_DEVICEID_VENDOR(x)	_SB_MAKEVALUE_32(x, S_LDT_DEVICEID_VENDOR)
+#define G_LDT_DEVICEID_VENDOR(x)	_SB_GETVALUE_32(x, S_LDT_DEVICEID_VENDOR, M_LDT_DEVICEID_VENDOR)
+
+#define S_LDT_DEVICEID_DEVICEID		16
+#define M_LDT_DEVICEID_DEVICEID		_SB_MAKEMASK_32(16, S_LDT_DEVICEID_DEVICEID)
+#define V_LDT_DEVICEID_DEVICEID(x)	_SB_MAKEVALUE_32(x, S_LDT_DEVICEID_DEVICEID)
+#define G_LDT_DEVICEID_DEVICEID(x)	_SB_GETVALUE_32(x, S_LDT_DEVICEID_DEVICEID, M_LDT_DEVICEID_DEVICEID)
+
+
+/*
+ * LDT Command Register (Table 8-13)
+ */
+
+#define M_LDT_CMD_IOSPACE_EN		_SB_MAKEMASK1_32(0)
+#define M_LDT_CMD_MEMSPACE_EN		_SB_MAKEMASK1_32(1)
+#define M_LDT_CMD_MASTER_EN		_SB_MAKEMASK1_32(2)
+#define M_LDT_CMD_SPECCYC_EN		_SB_MAKEMASK1_32(3)
+#define M_LDT_CMD_MEMWRINV_EN		_SB_MAKEMASK1_32(4)
+#define M_LDT_CMD_VGAPALSNP_EN		_SB_MAKEMASK1_32(5)
+#define M_LDT_CMD_PARERRRESP		_SB_MAKEMASK1_32(6)
+#define M_LDT_CMD_WAITCYCCTRL		_SB_MAKEMASK1_32(7)
+#define M_LDT_CMD_SERR_EN		_SB_MAKEMASK1_32(8)
+#define M_LDT_CMD_FASTB2B_EN		_SB_MAKEMASK1_32(9)
+
+/*
+ * LDT class and revision registers
+ */
+
+#define S_LDT_CLASSREV_REV		0
+#define M_LDT_CLASSREV_REV		_SB_MAKEMASK_32(8, S_LDT_CLASSREV_REV)
+#define V_LDT_CLASSREV_REV(x)		_SB_MAKEVALUE_32(x, S_LDT_CLASSREV_REV)
+#define G_LDT_CLASSREV_REV(x)		_SB_GETVALUE_32(x, S_LDT_CLASSREV_REV, M_LDT_CLASSREV_REV)
+
+#define S_LDT_CLASSREV_CLASS		8
+#define M_LDT_CLASSREV_CLASS		_SB_MAKEMASK_32(24, S_LDT_CLASSREV_CLASS)
+#define V_LDT_CLASSREV_CLASS(x)		_SB_MAKEVALUE_32(x, S_LDT_CLASSREV_CLASS)
+#define G_LDT_CLASSREV_CLASS(x)		_SB_GETVALUE_32(x, S_LDT_CLASSREV_CLASS, M_LDT_CLASSREV_CLASS)
+
+#define K_LDT_REV			0x01
+#define K_LDT_CLASS			0x060000
+
+/*
+ * Device Header (offset 0x0C)
+ */
+
+#define S_LDT_DEVHDR_CLINESZ		0
+#define M_LDT_DEVHDR_CLINESZ		_SB_MAKEMASK_32(8, S_LDT_DEVHDR_CLINESZ)
+#define V_LDT_DEVHDR_CLINESZ(x)		_SB_MAKEVALUE_32(x, S_LDT_DEVHDR_CLINESZ)
+#define G_LDT_DEVHDR_CLINESZ(x)		_SB_GETVALUE_32(x, S_LDT_DEVHDR_CLINESZ, M_LDT_DEVHDR_CLINESZ)
+
+#define S_LDT_DEVHDR_LATTMR		8
+#define M_LDT_DEVHDR_LATTMR		_SB_MAKEMASK_32(8, S_LDT_DEVHDR_LATTMR)
+#define V_LDT_DEVHDR_LATTMR(x)		_SB_MAKEVALUE_32(x, S_LDT_DEVHDR_LATTMR)
+#define G_LDT_DEVHDR_LATTMR(x)		_SB_GETVALUE_32(x, S_LDT_DEVHDR_LATTMR, M_LDT_DEVHDR_LATTMR)
+
+#define S_LDT_DEVHDR_HDRTYPE		16
+#define M_LDT_DEVHDR_HDRTYPE		_SB_MAKEMASK_32(8, S_LDT_DEVHDR_HDRTYPE)
+#define V_LDT_DEVHDR_HDRTYPE(x)		_SB_MAKEVALUE_32(x, S_LDT_DEVHDR_HDRTYPE)
+#define G_LDT_DEVHDR_HDRTYPE(x)		_SB_GETVALUE_32(x, S_LDT_DEVHDR_HDRTYPE, M_LDT_DEVHDR_HDRTYPE)
+
+#define K_LDT_DEVHDR_HDRTYPE_TYPE1	1
+
+#define S_LDT_DEVHDR_BIST		24
+#define M_LDT_DEVHDR_BIST		_SB_MAKEMASK_32(8, S_LDT_DEVHDR_BIST)
+#define V_LDT_DEVHDR_BIST(x)		_SB_MAKEVALUE_32(x, S_LDT_DEVHDR_BIST)
+#define G_LDT_DEVHDR_BIST(x)		_SB_GETVALUE_32(x, S_LDT_DEVHDR_BIST, M_LDT_DEVHDR_BIST)
+
+
+
+/*
+ * LDT Status Register (Table 8-14).  Note that these constants
+ * assume you've read the command and status register
+ * together (32-bit read at offset 0x04)
+ *
+ * These bits also apply to the secondary status
+ * register (Table 8-15), offset 0x1C
+ */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_LDT_STATUS_VGAEN		_SB_MAKEMASK1_32(3)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define M_LDT_STATUS_CAPLIST		_SB_MAKEMASK1_32(20)
+#define M_LDT_STATUS_66MHZCAP		_SB_MAKEMASK1_32(21)
+#define M_LDT_STATUS_RESERVED2		_SB_MAKEMASK1_32(22)
+#define M_LDT_STATUS_FASTB2BCAP		_SB_MAKEMASK1_32(23)
+#define M_LDT_STATUS_MSTRDPARERR	_SB_MAKEMASK1_32(24)
+
+#define S_LDT_STATUS_DEVSELTIMING	25
+#define M_LDT_STATUS_DEVSELTIMING	_SB_MAKEMASK_32(2, S_LDT_STATUS_DEVSELTIMING)
+#define V_LDT_STATUS_DEVSELTIMING(x)	_SB_MAKEVALUE_32(x, S_LDT_STATUS_DEVSELTIMING)
+#define G_LDT_STATUS_DEVSELTIMING(x)	_SB_GETVALUE_32(x, S_LDT_STATUS_DEVSELTIMING, M_LDT_STATUS_DEVSELTIMING)
+
+#define M_LDT_STATUS_SIGDTGTABORT	_SB_MAKEMASK1_32(27)
+#define M_LDT_STATUS_RCVDTGTABORT	_SB_MAKEMASK1_32(28)
+#define M_LDT_STATUS_RCVDMSTRABORT	_SB_MAKEMASK1_32(29)
+#define M_LDT_STATUS_SIGDSERR		_SB_MAKEMASK1_32(30)
+#define M_LDT_STATUS_DETPARERR		_SB_MAKEMASK1_32(31)
+
+/*
+ * Bridge Control Register (Table 8-16).  Note that these
+ * constants assume you've read the register as a 32-bit
+ * read (offset 0x3C)
+ */
+
+#define M_LDT_BRCTL_PARERRRESP_EN	_SB_MAKEMASK1_32(16)
+#define M_LDT_BRCTL_SERR_EN		_SB_MAKEMASK1_32(17)
+#define M_LDT_BRCTL_ISA_EN		_SB_MAKEMASK1_32(18)
+#define M_LDT_BRCTL_VGA_EN		_SB_MAKEMASK1_32(19)
+#define M_LDT_BRCTL_MSTRABORTMODE	_SB_MAKEMASK1_32(21)
+#define M_LDT_BRCTL_SECBUSRESET		_SB_MAKEMASK1_32(22)
+#define M_LDT_BRCTL_FASTB2B_EN		_SB_MAKEMASK1_32(23)
+#define M_LDT_BRCTL_PRIDISCARD		_SB_MAKEMASK1_32(24)
+#define M_LDT_BRCTL_SECDISCARD		_SB_MAKEMASK1_32(25)
+#define M_LDT_BRCTL_DISCARDSTAT		_SB_MAKEMASK1_32(26)
+#define M_LDT_BRCTL_DISCARDSERR_EN	_SB_MAKEMASK1_32(27)
+
+/*
+ * LDT Command Register (Table 8-17).  Note that these constants
+ * assume you've read the command and status register together
+ * 32-bit read at offset 0x40
+ */
+
+#define M_LDT_CMD_WARMRESET		_SB_MAKEMASK1_32(16)
+#define M_LDT_CMD_DOUBLEENDED		_SB_MAKEMASK1_32(17)
+
+#define S_LDT_CMD_CAPTYPE		29
+#define M_LDT_CMD_CAPTYPE		_SB_MAKEMASK_32(3, S_LDT_CMD_CAPTYPE)
+#define V_LDT_CMD_CAPTYPE(x)		_SB_MAKEVALUE_32(x, S_LDT_CMD_CAPTYPE)
+#define G_LDT_CMD_CAPTYPE(x)		_SB_GETVALUE_32(x, S_LDT_CMD_CAPTYPE, M_LDT_CMD_CAPTYPE)
+
+/*
+ * LDT link control register (Table 8-18), and (Table 8-19)
+ */
+
+#define M_LDT_LINKCTRL_CAPSYNCFLOOD_EN	_SB_MAKEMASK1_32(1)
+#define M_LDT_LINKCTRL_CRCSTARTTEST	_SB_MAKEMASK1_32(2)
+#define M_LDT_LINKCTRL_CRCFORCEERR	_SB_MAKEMASK1_32(3)
+#define M_LDT_LINKCTRL_LINKFAIL		_SB_MAKEMASK1_32(4)
+#define M_LDT_LINKCTRL_INITDONE		_SB_MAKEMASK1_32(5)
+#define M_LDT_LINKCTRL_EOC		_SB_MAKEMASK1_32(6)
+#define M_LDT_LINKCTRL_XMITOFF		_SB_MAKEMASK1_32(7)
+
+#define S_LDT_LINKCTRL_CRCERR		8
+#define M_LDT_LINKCTRL_CRCERR		_SB_MAKEMASK_32(4, S_LDT_LINKCTRL_CRCERR)
+#define V_LDT_LINKCTRL_CRCERR(x)	_SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_CRCERR)
+#define G_LDT_LINKCTRL_CRCERR(x)	_SB_GETVALUE_32(x, S_LDT_LINKCTRL_CRCERR, M_LDT_LINKCTRL_CRCERR)
+
+#define S_LDT_LINKCTRL_MAXIN		16
+#define M_LDT_LINKCTRL_MAXIN		_SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXIN)
+#define V_LDT_LINKCTRL_MAXIN(x)		_SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXIN)
+#define G_LDT_LINKCTRL_MAXIN(x)		_SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXIN, M_LDT_LINKCTRL_MAXIN)
+
+#define M_LDT_LINKCTRL_DWFCLN		_SB_MAKEMASK1_32(19)
+
+#define S_LDT_LINKCTRL_MAXOUT		20
+#define M_LDT_LINKCTRL_MAXOUT		_SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXOUT)
+#define V_LDT_LINKCTRL_MAXOUT(x)	_SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXOUT)
+#define G_LDT_LINKCTRL_MAXOUT(x)	_SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXOUT, M_LDT_LINKCTRL_MAXOUT)
+
+#define M_LDT_LINKCTRL_DWFCOUT		_SB_MAKEMASK1_32(23)
+
+#define S_LDT_LINKCTRL_WIDTHIN		24
+#define M_LDT_LINKCTRL_WIDTHIN		_SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHIN)
+#define V_LDT_LINKCTRL_WIDTHIN(x)	_SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN)
+#define G_LDT_LINKCTRL_WIDTHIN(x)	_SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN, M_LDT_LINKCTRL_WIDTHIN)
+
+#define M_LDT_LINKCTRL_DWFCLIN_EN	_SB_MAKEMASK1_32(27)
+
+#define S_LDT_LINKCTRL_WIDTHOUT		28
+#define M_LDT_LINKCTRL_WIDTHOUT		_SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHOUT)
+#define V_LDT_LINKCTRL_WIDTHOUT(x)	_SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT)
+#define G_LDT_LINKCTRL_WIDTHOUT(x)	_SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT, M_LDT_LINKCTRL_WIDTHOUT)
+
+#define M_LDT_LINKCTRL_DWFCOUT_EN	_SB_MAKEMASK1_32(31)
+
+/*
+ * LDT Link frequency register  (Table 8-20) offset 0x48
+ */
+
+#define S_LDT_LINKFREQ_FREQ		8
+#define M_LDT_LINKFREQ_FREQ		_SB_MAKEMASK_32(4, S_LDT_LINKFREQ_FREQ)
+#define V_LDT_LINKFREQ_FREQ(x)		_SB_MAKEVALUE_32(x, S_LDT_LINKFREQ_FREQ)
+#define G_LDT_LINKFREQ_FREQ(x)		_SB_GETVALUE_32(x, S_LDT_LINKFREQ_FREQ, M_LDT_LINKFREQ_FREQ)
+
+#define K_LDT_LINKFREQ_200MHZ		0
+#define K_LDT_LINKFREQ_300MHZ		1
+#define K_LDT_LINKFREQ_400MHZ		2
+#define K_LDT_LINKFREQ_500MHZ		3
+#define K_LDT_LINKFREQ_600MHZ		4
+#define K_LDT_LINKFREQ_800MHZ		5
+#define K_LDT_LINKFREQ_1000MHZ		6
+
+/*
+ * LDT SRI Command Register (Table 8-21).  Note that these constants
+ * assume you've read the command and status register together
+ * 32-bit read at offset 0x50
+ */
+
+#define M_LDT_SRICMD_SIPREADY		_SB_MAKEMASK1_32(16)
+#define M_LDT_SRICMD_SYNCPTRCTL		_SB_MAKEMASK1_32(17)
+#define M_LDT_SRICMD_REDUCESYNCZERO	_SB_MAKEMASK1_32(18)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+#define M_LDT_SRICMD_DISSTARVATIONCNT	_SB_MAKEMASK1_32(19)	/* PASS1 */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_LDT_SRICMD_DISMULTTXVLD	_SB_MAKEMASK1_32(19)
+#define M_LDT_SRICMD_EXPENDIAN		_SB_MAKEMASK1_32(26)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+#define S_LDT_SRICMD_RXMARGIN		20
+#define M_LDT_SRICMD_RXMARGIN		_SB_MAKEMASK_32(5, S_LDT_SRICMD_RXMARGIN)
+#define V_LDT_SRICMD_RXMARGIN(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICMD_RXMARGIN)
+#define G_LDT_SRICMD_RXMARGIN(x)	_SB_GETVALUE_32(x, S_LDT_SRICMD_RXMARGIN, M_LDT_SRICMD_RXMARGIN)
+
+#define M_LDT_SRICMD_LDTPLLCOMPAT	_SB_MAKEMASK1_32(25)
+
+#define S_LDT_SRICMD_TXINITIALOFFSET	28
+#define M_LDT_SRICMD_TXINITIALOFFSET	_SB_MAKEMASK_32(3, S_LDT_SRICMD_TXINITIALOFFSET)
+#define V_LDT_SRICMD_TXINITIALOFFSET(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET)
+#define G_LDT_SRICMD_TXINITIALOFFSET(x)	_SB_GETVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET, M_LDT_SRICMD_TXINITIALOFFSET)
+
+#define M_LDT_SRICMD_LINKFREQDIRECT	_SB_MAKEMASK1_32(31)
+
+/*
+ * LDT Error control and status register (Table 8-22) (Table 8-23)
+ */
+
+#define M_LDT_ERRCTL_PROTFATAL_EN	_SB_MAKEMASK1_32(0)
+#define M_LDT_ERRCTL_PROTNONFATAL_EN	_SB_MAKEMASK1_32(1)
+#define M_LDT_ERRCTL_PROTSYNCFLOOD_EN	_SB_MAKEMASK1_32(2)
+#define M_LDT_ERRCTL_OVFFATAL_EN	_SB_MAKEMASK1_32(3)
+#define M_LDT_ERRCTL_OVFNONFATAL_EN	_SB_MAKEMASK1_32(4)
+#define M_LDT_ERRCTL_OVFSYNCFLOOD_EN	_SB_MAKEMASK1_32(5)
+#define M_LDT_ERRCTL_EOCNXAFATAL_EN	_SB_MAKEMASK1_32(6)
+#define M_LDT_ERRCTL_EOCNXANONFATAL_EN	_SB_MAKEMASK1_32(7)
+#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN	_SB_MAKEMASK1_32(8)
+#define M_LDT_ERRCTL_CRCFATAL_EN	_SB_MAKEMASK1_32(9)
+#define M_LDT_ERRCTL_CRCNONFATAL_EN	_SB_MAKEMASK1_32(10)
+#define M_LDT_ERRCTL_SERRFATAL_EN	_SB_MAKEMASK1_32(11)
+#define M_LDT_ERRCTL_SRCTAGFATAL_EN	_SB_MAKEMASK1_32(12)
+#define M_LDT_ERRCTL_SRCTAGNONFATAL_EN	_SB_MAKEMASK1_32(13)
+#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN	_SB_MAKEMASK1_32(14)
+#define M_LDT_ERRCTL_MAPNXAFATAL_EN	_SB_MAKEMASK1_32(15)
+#define M_LDT_ERRCTL_MAPNXANONFATAL_EN	_SB_MAKEMASK1_32(16)
+#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN	_SB_MAKEMASK1_32(17)
+
+#define M_LDT_ERRCTL_PROTOERR		_SB_MAKEMASK1_32(24)
+#define M_LDT_ERRCTL_OVFERR		_SB_MAKEMASK1_32(25)
+#define M_LDT_ERRCTL_EOCNXAERR		_SB_MAKEMASK1_32(26)
+#define M_LDT_ERRCTL_SRCTAGERR		_SB_MAKEMASK1_32(27)
+#define M_LDT_ERRCTL_MAPNXAERR		_SB_MAKEMASK1_32(28)
+
+/*
+ * SRI Control register (Table 8-24, 8-25)  Offset 0x6C
+ */
+
+#define S_LDT_SRICTRL_NEEDRESP		0
+#define M_LDT_SRICTRL_NEEDRESP		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDRESP)
+#define V_LDT_SRICTRL_NEEDRESP(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDRESP)
+#define G_LDT_SRICTRL_NEEDRESP(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDRESP, M_LDT_SRICTRL_NEEDRESP)
+
+#define S_LDT_SRICTRL_NEEDNPREQ		2
+#define M_LDT_SRICTRL_NEEDNPREQ		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDNPREQ)
+#define V_LDT_SRICTRL_NEEDNPREQ(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ)
+#define G_LDT_SRICTRL_NEEDNPREQ(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ, M_LDT_SRICTRL_NEEDNPREQ)
+
+#define S_LDT_SRICTRL_NEEDPREQ		4
+#define M_LDT_SRICTRL_NEEDPREQ		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDPREQ)
+#define V_LDT_SRICTRL_NEEDPREQ(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ)
+#define G_LDT_SRICTRL_NEEDPREQ(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ, M_LDT_SRICTRL_NEEDPREQ)
+
+#define S_LDT_SRICTRL_WANTRESP		8
+#define M_LDT_SRICTRL_WANTRESP		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTRESP)
+#define V_LDT_SRICTRL_WANTRESP(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTRESP)
+#define G_LDT_SRICTRL_WANTRESP(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTRESP, M_LDT_SRICTRL_WANTRESP)
+
+#define S_LDT_SRICTRL_WANTNPREQ		10
+#define M_LDT_SRICTRL_WANTNPREQ		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTNPREQ)
+#define V_LDT_SRICTRL_WANTNPREQ(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ)
+#define G_LDT_SRICTRL_WANTNPREQ(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ, M_LDT_SRICTRL_WANTNPREQ)
+
+#define S_LDT_SRICTRL_WANTPREQ		12
+#define M_LDT_SRICTRL_WANTPREQ		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTPREQ)
+#define V_LDT_SRICTRL_WANTPREQ(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTPREQ)
+#define G_LDT_SRICTRL_WANTPREQ(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTPREQ, M_LDT_SRICTRL_WANTPREQ)
+
+#define S_LDT_SRICTRL_BUFRELSPACE	16
+#define M_LDT_SRICTRL_BUFRELSPACE	_SB_MAKEMASK_32(4, S_LDT_SRICTRL_BUFRELSPACE)
+#define V_LDT_SRICTRL_BUFRELSPACE(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE)
+#define G_LDT_SRICTRL_BUFRELSPACE(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE, M_LDT_SRICTRL_BUFRELSPACE)
+
+/*
+ * LDT SRI Transmit Buffer Count register (Table 8-26)
+ */
+
+#define S_LDT_TXBUFCNT_PCMD		0
+#define M_LDT_TXBUFCNT_PCMD		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PCMD)
+#define V_LDT_TXBUFCNT_PCMD(x)		_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PCMD)
+#define G_LDT_TXBUFCNT_PCMD(x)		_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PCMD, M_LDT_TXBUFCNT_PCMD)
+
+#define S_LDT_TXBUFCNT_PDATA		4
+#define M_LDT_TXBUFCNT_PDATA		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PDATA)
+#define V_LDT_TXBUFCNT_PDATA(x)		_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PDATA)
+#define G_LDT_TXBUFCNT_PDATA(x)		_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PDATA, M_LDT_TXBUFCNT_PDATA)
+
+#define S_LDT_TXBUFCNT_NPCMD		8
+#define M_LDT_TXBUFCNT_NPCMD		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPCMD)
+#define V_LDT_TXBUFCNT_NPCMD(x)		_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPCMD)
+#define G_LDT_TXBUFCNT_NPCMD(x)		_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPCMD, M_LDT_TXBUFCNT_NPCMD)
+
+#define S_LDT_TXBUFCNT_NPDATA		12
+#define M_LDT_TXBUFCNT_NPDATA		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPDATA)
+#define V_LDT_TXBUFCNT_NPDATA(x)	_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPDATA)
+#define G_LDT_TXBUFCNT_NPDATA(x)	_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPDATA, M_LDT_TXBUFCNT_NPDATA)
+
+#define S_LDT_TXBUFCNT_RCMD		16
+#define M_LDT_TXBUFCNT_RCMD		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RCMD)
+#define V_LDT_TXBUFCNT_RCMD(x)		_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RCMD)
+#define G_LDT_TXBUFCNT_RCMD(x)		_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RCMD, M_LDT_TXBUFCNT_RCMD)
+
+#define S_LDT_TXBUFCNT_RDATA		20
+#define M_LDT_TXBUFCNT_RDATA		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RDATA)
+#define V_LDT_TXBUFCNT_RDATA(x)		_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RDATA)
+#define G_LDT_TXBUFCNT_RDATA(x)		_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RDATA, M_LDT_TXBUFCNT_RDATA)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * Additional Status Register
+ */
+
+#define S_LDT_ADDSTATUS_TGTDONE		0
+#define M_LDT_ADDSTATUS_TGTDONE		_SB_MAKEMASK_32(8, S_LDT_ADDSTATUS_TGTDONE)
+#define V_LDT_ADDSTATUS_TGTDONE(x)	_SB_MAKEVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE)
+#define G_LDT_ADDSTATUS_TGTDONE(x)	_SB_GETVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE, M_LDT_ADDSTATUS_TGTDONE)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#endif
+
diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h
new file mode 100644
index 0000000..b6faf08
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_mac.h
@@ -0,0 +1,656 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  MAC constants and macros			File: sb1250_mac.h
+    *
+    *  This module contains constants and macros for the SB1250's
+    *  ethernet controllers.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_MAC_H
+#define _SB1250_MAC_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Ethernet MAC Registers
+    ********************************************************************* */
+
+/*
+ * MAC Configuration Register (Table 9-13)
+ * Register: MAC_CFG_0
+ * Register: MAC_CFG_1
+ * Register: MAC_CFG_2
+ */
+
+
+#define M_MAC_RESERVED0             _SB_MAKEMASK1(0)
+#define M_MAC_TX_HOLD_SOP_EN        _SB_MAKEMASK1(1)
+#define M_MAC_RETRY_EN              _SB_MAKEMASK1(2)
+#define M_MAC_RET_DRPREQ_EN         _SB_MAKEMASK1(3)
+#define M_MAC_RET_UFL_EN            _SB_MAKEMASK1(4)
+#define M_MAC_BURST_EN              _SB_MAKEMASK1(5)
+
+#define S_MAC_TX_PAUSE              _SB_MAKE64(6)
+#define M_MAC_TX_PAUSE_CNT          _SB_MAKEMASK(3, S_MAC_TX_PAUSE)
+#define V_MAC_TX_PAUSE_CNT(x)       _SB_MAKEVALUE(x, S_MAC_TX_PAUSE)
+
+#define K_MAC_TX_PAUSE_CNT_512      0
+#define K_MAC_TX_PAUSE_CNT_1K       1
+#define K_MAC_TX_PAUSE_CNT_2K       2
+#define K_MAC_TX_PAUSE_CNT_4K       3
+#define K_MAC_TX_PAUSE_CNT_8K       4
+#define K_MAC_TX_PAUSE_CNT_16K      5
+#define K_MAC_TX_PAUSE_CNT_32K      6
+#define K_MAC_TX_PAUSE_CNT_64K      7
+
+#define V_MAC_TX_PAUSE_CNT_512      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512)
+#define V_MAC_TX_PAUSE_CNT_1K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K)
+#define V_MAC_TX_PAUSE_CNT_2K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K)
+#define V_MAC_TX_PAUSE_CNT_4K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K)
+#define V_MAC_TX_PAUSE_CNT_8K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K)
+#define V_MAC_TX_PAUSE_CNT_16K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K)
+#define V_MAC_TX_PAUSE_CNT_32K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K)
+#define V_MAC_TX_PAUSE_CNT_64K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K)
+
+#define M_MAC_RESERVED1             _SB_MAKEMASK(8, 9)
+
+#define M_MAC_AP_STAT_EN            _SB_MAKEMASK1(17)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TIMESTAMP		    _SB_MAKEMASK1(18)
+#endif
+#define M_MAC_DRP_ERRPKT_EN         _SB_MAKEMASK1(19)
+#define M_MAC_DRP_FCSERRPKT_EN      _SB_MAKEMASK1(20)
+#define M_MAC_DRP_CODEERRPKT_EN     _SB_MAKEMASK1(21)
+#define M_MAC_DRP_DRBLERRPKT_EN     _SB_MAKEMASK1(22)
+#define M_MAC_DRP_RNTPKT_EN         _SB_MAKEMASK1(23)
+#define M_MAC_DRP_OSZPKT_EN         _SB_MAKEMASK1(24)
+#define M_MAC_DRP_LENERRPKT_EN      _SB_MAKEMASK1(25)
+
+#define M_MAC_RESERVED3             _SB_MAKEMASK(6, 26)
+
+#define M_MAC_BYPASS_SEL            _SB_MAKEMASK1(32)
+#define M_MAC_HDX_EN                _SB_MAKEMASK1(33)
+
+#define S_MAC_SPEED_SEL             _SB_MAKE64(34)
+#define M_MAC_SPEED_SEL             _SB_MAKEMASK(2, S_MAC_SPEED_SEL)
+#define V_MAC_SPEED_SEL(x)	    _SB_MAKEVALUE(x, S_MAC_SPEED_SEL)
+#define G_MAC_SPEED_SEL(x)	    _SB_GETVALUE(x, S_MAC_SPEED_SEL, M_MAC_SPEED_SEL)
+
+#define K_MAC_SPEED_SEL_10MBPS      0
+#define K_MAC_SPEED_SEL_100MBPS     1
+#define K_MAC_SPEED_SEL_1000MBPS    2
+#define K_MAC_SPEED_SEL_RESERVED    3
+
+#define V_MAC_SPEED_SEL_10MBPS      V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS)
+#define V_MAC_SPEED_SEL_100MBPS     V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS)
+#define V_MAC_SPEED_SEL_1000MBPS    V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_1000MBPS)
+#define V_MAC_SPEED_SEL_RESERVED    V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_RESERVED)
+
+#define M_MAC_TX_CLK_EDGE_SEL       _SB_MAKEMASK1(36)
+#define M_MAC_LOOPBACK_SEL          _SB_MAKEMASK1(37)
+#define M_MAC_FAST_SYNC             _SB_MAKEMASK1(38)
+#define M_MAC_SS_EN                 _SB_MAKEMASK1(39)
+
+#define S_MAC_BYPASS_CFG	    _SB_MAKE64(40)
+#define M_MAC_BYPASS_CFG            _SB_MAKEMASK(2, S_MAC_BYPASS_CFG)
+#define V_MAC_BYPASS_CFG(x)         _SB_MAKEVALUE(x, S_MAC_BYPASS_CFG)
+#define G_MAC_BYPASS_CFG(x)         _SB_GETVALUE(x, S_MAC_BYPASS_CFG, M_MAC_BYPASS_CFG)
+
+#define K_MAC_BYPASS_GMII	    0
+#define K_MAC_BYPASS_ENCODED        1
+#define K_MAC_BYPASS_SOP            2
+#define K_MAC_BYPASS_EOP            3
+
+#define M_MAC_BYPASS_16             _SB_MAKEMASK1(42)
+#define M_MAC_BYPASS_FCS_CHK	    _SB_MAKEMASK1(43)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_RX_CH_SEL_MSB	    _SB_MAKEMASK1(44)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480*/
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_SPLIT_CH_SEL	    _SB_MAKEMASK1(45)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_MAC_BYPASS_IFG            _SB_MAKE64(46)
+#define M_MAC_BYPASS_IFG            _SB_MAKEMASK(8, S_MAC_BYPASS_IFG)
+#define V_MAC_BYPASS_IFG(x)	    _SB_MAKEVALUE(x, S_MAC_BYPASS_IFG)
+#define G_MAC_BYPASS_IFG(x)	    _SB_GETVALUE(x, S_MAC_BYPASS_IFG, M_MAC_BYPASS_IFG)
+
+#define K_MAC_FC_CMD_DISABLED       0
+#define K_MAC_FC_CMD_ENABLED        1
+#define K_MAC_FC_CMD_ENAB_FALSECARR 2
+
+#define V_MAC_FC_CMD_DISABLED       V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED)
+#define V_MAC_FC_CMD_ENABLED        V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED)
+#define V_MAC_FC_CMD_ENAB_FALSECARR V_MAC_FC_CMD(K_MAC_FC_CMD_ENAB_FALSECARR)
+
+#define M_MAC_FC_SEL                _SB_MAKEMASK1(54)
+
+#define S_MAC_FC_CMD                _SB_MAKE64(55)
+#define M_MAC_FC_CMD                _SB_MAKEMASK(2, S_MAC_FC_CMD)
+#define V_MAC_FC_CMD(x)	            _SB_MAKEVALUE(x, S_MAC_FC_CMD)
+#define G_MAC_FC_CMD(x)	            _SB_GETVALUE(x, S_MAC_FC_CMD, M_MAC_FC_CMD)
+
+#define S_MAC_RX_CH_SEL             _SB_MAKE64(57)
+#define M_MAC_RX_CH_SEL             _SB_MAKEMASK(7, S_MAC_RX_CH_SEL)
+#define V_MAC_RX_CH_SEL(x)          _SB_MAKEVALUE(x, S_MAC_RX_CH_SEL)
+#define G_MAC_RX_CH_SEL(x)          _SB_GETVALUE(x, S_MAC_RX_CH_SEL, M_MAC_RX_CH_SEL)
+
+
+/*
+ * MAC Enable Registers
+ * Register: MAC_ENABLE_0
+ * Register: MAC_ENABLE_1
+ * Register: MAC_ENABLE_2
+ */
+
+#define M_MAC_RXDMA_EN0	            _SB_MAKEMASK1(0)
+#define M_MAC_RXDMA_EN1	            _SB_MAKEMASK1(1)
+#define M_MAC_TXDMA_EN0	            _SB_MAKEMASK1(4)
+#define M_MAC_TXDMA_EN1	            _SB_MAKEMASK1(5)
+
+#define M_MAC_PORT_RESET            _SB_MAKEMASK1(8)
+
+#if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
+#define M_MAC_RX_ENABLE             _SB_MAKEMASK1(10)
+#define M_MAC_TX_ENABLE             _SB_MAKEMASK1(11)
+#define M_MAC_BYP_RX_ENABLE         _SB_MAKEMASK1(12)
+#define M_MAC_BYP_TX_ENABLE         _SB_MAKEMASK1(13)
+#endif
+
+/*
+ * MAC reset information register (1280/1255)
+ */
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_RX_CH0_PAUSE_ON	_SB_MAKEMASK1(8)
+#define M_MAC_RX_CH1_PAUSE_ON	_SB_MAKEMASK1(16)
+#define M_MAC_TX_CH0_PAUSE_ON	_SB_MAKEMASK1(24)
+#define M_MAC_TX_CH1_PAUSE_ON	_SB_MAKEMASK1(32)
+#endif
+
+/*
+ * MAC DMA Control Register
+ * Register: MAC_TXD_CTL_0
+ * Register: MAC_TXD_CTL_1
+ * Register: MAC_TXD_CTL_2
+ */
+
+#define S_MAC_TXD_WEIGHT0	    _SB_MAKE64(0)
+#define M_MAC_TXD_WEIGHT0	    _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT0)
+#define V_MAC_TXD_WEIGHT0(x)        _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT0)
+#define G_MAC_TXD_WEIGHT0(x)        _SB_GETVALUE(x, S_MAC_TXD_WEIGHT0, M_MAC_TXD_WEIGHT0)
+
+#define S_MAC_TXD_WEIGHT1	    _SB_MAKE64(4)
+#define M_MAC_TXD_WEIGHT1	    _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT1)
+#define V_MAC_TXD_WEIGHT1(x)        _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT1)
+#define G_MAC_TXD_WEIGHT1(x)        _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1)
+
+/*
+ * MAC Fifo Threshhold registers (Table 9-14)
+ * Register: MAC_THRSH_CFG_0
+ * Register: MAC_THRSH_CFG_1
+ * Register: MAC_THRSH_CFG_2
+ */
+
+#define S_MAC_TX_WR_THRSH           _SB_MAKE64(0)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+/* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
+/* #define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(6, S_MAC_TX_WR_THRSH) */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(7, S_MAC_TX_WR_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define V_MAC_TX_WR_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_TX_WR_THRSH)
+#define G_MAC_TX_WR_THRSH(x)        _SB_GETVALUE(x, S_MAC_TX_WR_THRSH, M_MAC_TX_WR_THRSH)
+
+#define S_MAC_TX_RD_THRSH           _SB_MAKE64(8)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+/* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
+/* #define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(6, S_MAC_TX_RD_THRSH) */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(7, S_MAC_TX_RD_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define V_MAC_TX_RD_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_TX_RD_THRSH)
+#define G_MAC_TX_RD_THRSH(x)        _SB_GETVALUE(x, S_MAC_TX_RD_THRSH, M_MAC_TX_RD_THRSH)
+
+#define S_MAC_TX_RL_THRSH           _SB_MAKE64(16)
+#define M_MAC_TX_RL_THRSH           _SB_MAKEMASK(4, S_MAC_TX_RL_THRSH)
+#define V_MAC_TX_RL_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_TX_RL_THRSH)
+#define G_MAC_TX_RL_THRSH(x)        _SB_GETVALUE(x, S_MAC_TX_RL_THRSH, M_MAC_TX_RL_THRSH)
+
+#define S_MAC_RX_PL_THRSH           _SB_MAKE64(24)
+#define M_MAC_RX_PL_THRSH           _SB_MAKEMASK(6, S_MAC_RX_PL_THRSH)
+#define V_MAC_RX_PL_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_RX_PL_THRSH)
+#define G_MAC_RX_PL_THRSH(x)        _SB_GETVALUE(x, S_MAC_RX_PL_THRSH, M_MAC_RX_PL_THRSH)
+
+#define S_MAC_RX_RD_THRSH           _SB_MAKE64(32)
+#define M_MAC_RX_RD_THRSH           _SB_MAKEMASK(6, S_MAC_RX_RD_THRSH)
+#define V_MAC_RX_RD_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_RX_RD_THRSH)
+#define G_MAC_RX_RD_THRSH(x)        _SB_GETVALUE(x, S_MAC_RX_RD_THRSH, M_MAC_RX_RD_THRSH)
+
+#define S_MAC_RX_RL_THRSH           _SB_MAKE64(40)
+#define M_MAC_RX_RL_THRSH           _SB_MAKEMASK(6, S_MAC_RX_RL_THRSH)
+#define V_MAC_RX_RL_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_RX_RL_THRSH)
+#define G_MAC_RX_RL_THRSH(x)        _SB_GETVALUE(x, S_MAC_RX_RL_THRSH, M_MAC_RX_RL_THRSH)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_MAC_ENC_FC_THRSH           _SB_MAKE64(56)
+#define M_MAC_ENC_FC_THRSH           _SB_MAKEMASK(6, S_MAC_ENC_FC_THRSH)
+#define V_MAC_ENC_FC_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_ENC_FC_THRSH)
+#define G_MAC_ENC_FC_THRSH(x)        _SB_GETVALUE(x, S_MAC_ENC_FC_THRSH, M_MAC_ENC_FC_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+/*
+ * MAC Frame Configuration Registers (Table 9-15)
+ * Register: MAC_FRAME_CFG_0
+ * Register: MAC_FRAME_CFG_1
+ * Register: MAC_FRAME_CFG_2
+ */
+
+/* XXXCGD: ??? Unused in pass2? */
+#define S_MAC_IFG_RX                _SB_MAKE64(0)
+#define M_MAC_IFG_RX                _SB_MAKEMASK(6, S_MAC_IFG_RX)
+#define V_MAC_IFG_RX(x)             _SB_MAKEVALUE(x, S_MAC_IFG_RX)
+#define G_MAC_IFG_RX(x)             _SB_GETVALUE(x, S_MAC_IFG_RX, M_MAC_IFG_RX)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_MAC_PRE_LEN               _SB_MAKE64(0)
+#define M_MAC_PRE_LEN               _SB_MAKEMASK(6, S_MAC_PRE_LEN)
+#define V_MAC_PRE_LEN(x)            _SB_MAKEVALUE(x, S_MAC_PRE_LEN)
+#define G_MAC_PRE_LEN(x)            _SB_GETVALUE(x, S_MAC_PRE_LEN, M_MAC_PRE_LEN)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_MAC_IFG_TX                _SB_MAKE64(6)
+#define M_MAC_IFG_TX                _SB_MAKEMASK(6, S_MAC_IFG_TX)
+#define V_MAC_IFG_TX(x)             _SB_MAKEVALUE(x, S_MAC_IFG_TX)
+#define G_MAC_IFG_TX(x)             _SB_GETVALUE(x, S_MAC_IFG_TX, M_MAC_IFG_TX)
+
+#define S_MAC_IFG_THRSH             _SB_MAKE64(12)
+#define M_MAC_IFG_THRSH             _SB_MAKEMASK(6, S_MAC_IFG_THRSH)
+#define V_MAC_IFG_THRSH(x)          _SB_MAKEVALUE(x, S_MAC_IFG_THRSH)
+#define G_MAC_IFG_THRSH(x)          _SB_GETVALUE(x, S_MAC_IFG_THRSH, M_MAC_IFG_THRSH)
+
+#define S_MAC_BACKOFF_SEL           _SB_MAKE64(18)
+#define M_MAC_BACKOFF_SEL           _SB_MAKEMASK(4, S_MAC_BACKOFF_SEL)
+#define V_MAC_BACKOFF_SEL(x)        _SB_MAKEVALUE(x, S_MAC_BACKOFF_SEL)
+#define G_MAC_BACKOFF_SEL(x)        _SB_GETVALUE(x, S_MAC_BACKOFF_SEL, M_MAC_BACKOFF_SEL)
+
+#define S_MAC_LFSR_SEED             _SB_MAKE64(22)
+#define M_MAC_LFSR_SEED             _SB_MAKEMASK(8, S_MAC_LFSR_SEED)
+#define V_MAC_LFSR_SEED(x)          _SB_MAKEVALUE(x, S_MAC_LFSR_SEED)
+#define G_MAC_LFSR_SEED(x)          _SB_GETVALUE(x, S_MAC_LFSR_SEED, M_MAC_LFSR_SEED)
+
+#define S_MAC_SLOT_SIZE             _SB_MAKE64(30)
+#define M_MAC_SLOT_SIZE             _SB_MAKEMASK(10, S_MAC_SLOT_SIZE)
+#define V_MAC_SLOT_SIZE(x)          _SB_MAKEVALUE(x, S_MAC_SLOT_SIZE)
+#define G_MAC_SLOT_SIZE(x)          _SB_GETVALUE(x, S_MAC_SLOT_SIZE, M_MAC_SLOT_SIZE)
+
+#define S_MAC_MIN_FRAMESZ           _SB_MAKE64(40)
+#define M_MAC_MIN_FRAMESZ           _SB_MAKEMASK(8, S_MAC_MIN_FRAMESZ)
+#define V_MAC_MIN_FRAMESZ(x)        _SB_MAKEVALUE(x, S_MAC_MIN_FRAMESZ)
+#define G_MAC_MIN_FRAMESZ(x)        _SB_GETVALUE(x, S_MAC_MIN_FRAMESZ, M_MAC_MIN_FRAMESZ)
+
+#define S_MAC_MAX_FRAMESZ           _SB_MAKE64(48)
+#define M_MAC_MAX_FRAMESZ           _SB_MAKEMASK(16, S_MAC_MAX_FRAMESZ)
+#define V_MAC_MAX_FRAMESZ(x)        _SB_MAKEVALUE(x, S_MAC_MAX_FRAMESZ)
+#define G_MAC_MAX_FRAMESZ(x)        _SB_GETVALUE(x, S_MAC_MAX_FRAMESZ, M_MAC_MAX_FRAMESZ)
+
+/*
+ * These constants are used to configure the fields within the Frame
+ * Configuration Register.
+ */
+
+#define K_MAC_IFG_RX_10             _SB_MAKE64(0)	/* See table 176, not used */
+#define K_MAC_IFG_RX_100            _SB_MAKE64(0)
+#define K_MAC_IFG_RX_1000           _SB_MAKE64(0)
+
+#define K_MAC_IFG_TX_10             _SB_MAKE64(20)
+#define K_MAC_IFG_TX_100            _SB_MAKE64(20)
+#define K_MAC_IFG_TX_1000           _SB_MAKE64(8)
+
+#define K_MAC_IFG_THRSH_10          _SB_MAKE64(4)
+#define K_MAC_IFG_THRSH_100         _SB_MAKE64(4)
+#define K_MAC_IFG_THRSH_1000        _SB_MAKE64(0)
+
+#define K_MAC_SLOT_SIZE_10          _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_100         _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_1000        _SB_MAKE64(0)
+
+#define V_MAC_IFG_RX_10        V_MAC_IFG_RX(K_MAC_IFG_RX_10)
+#define V_MAC_IFG_RX_100       V_MAC_IFG_RX(K_MAC_IFG_RX_100)
+#define V_MAC_IFG_RX_1000      V_MAC_IFG_RX(K_MAC_IFG_RX_1000)
+
+#define V_MAC_IFG_TX_10        V_MAC_IFG_TX(K_MAC_IFG_TX_10)
+#define V_MAC_IFG_TX_100       V_MAC_IFG_TX(K_MAC_IFG_TX_100)
+#define V_MAC_IFG_TX_1000      V_MAC_IFG_TX(K_MAC_IFG_TX_1000)
+
+#define V_MAC_IFG_THRSH_10     V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_10)
+#define V_MAC_IFG_THRSH_100    V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_100)
+#define V_MAC_IFG_THRSH_1000   V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_1000)
+
+#define V_MAC_SLOT_SIZE_10     V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_10)
+#define V_MAC_SLOT_SIZE_100    V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_100)
+#define V_MAC_SLOT_SIZE_1000   V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_1000)
+
+#define K_MAC_MIN_FRAMESZ_FIFO      _SB_MAKE64(9)
+#define K_MAC_MIN_FRAMESZ_DEFAULT   _SB_MAKE64(64)
+#define K_MAC_MAX_FRAMESZ_DEFAULT   _SB_MAKE64(1518)
+#define K_MAC_MAX_FRAMESZ_JUMBO     _SB_MAKE64(9216)
+
+#define V_MAC_MIN_FRAMESZ_FIFO      V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO)
+#define V_MAC_MIN_FRAMESZ_DEFAULT   V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_DEFAULT)
+#define V_MAC_MAX_FRAMESZ_DEFAULT   V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_DEFAULT)
+#define V_MAC_MAX_FRAMESZ_JUMBO     V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO)
+
+/*
+ * MAC VLAN Tag Registers (Table 9-16)
+ * Register: MAC_VLANTAG_0
+ * Register: MAC_VLANTAG_1
+ * Register: MAC_VLANTAG_2
+ */
+
+#define S_MAC_VLAN_TAG           _SB_MAKE64(0)
+#define M_MAC_VLAN_TAG           _SB_MAKEMASK(32, S_MAC_VLAN_TAG)
+#define V_MAC_VLAN_TAG(x)        _SB_MAKEVALUE(x, S_MAC_VLAN_TAG)
+#define G_MAC_VLAN_TAG(x)        _SB_GETVALUE(x, S_MAC_VLAN_TAG, M_MAC_VLAN_TAG)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_MAC_TX_PKT_OFFSET      _SB_MAKE64(32)
+#define M_MAC_TX_PKT_OFFSET      _SB_MAKEMASK(8, S_MAC_TX_PKT_OFFSET)
+#define V_MAC_TX_PKT_OFFSET(x)   _SB_MAKEVALUE(x, S_MAC_TX_PKT_OFFSET)
+#define G_MAC_TX_PKT_OFFSET(x)   _SB_GETVALUE(x, S_MAC_TX_PKT_OFFSET, M_MAC_TX_PKT_OFFSET)
+
+#define S_MAC_TX_CRC_OFFSET      _SB_MAKE64(40)
+#define M_MAC_TX_CRC_OFFSET      _SB_MAKEMASK(8, S_MAC_TX_CRC_OFFSET)
+#define V_MAC_TX_CRC_OFFSET(x)   _SB_MAKEVALUE(x, S_MAC_TX_CRC_OFFSET)
+#define G_MAC_TX_CRC_OFFSET(x)   _SB_GETVALUE(x, S_MAC_TX_CRC_OFFSET, M_MAC_TX_CRC_OFFSET)
+
+#define M_MAC_CH_BASE_FC_EN      _SB_MAKEMASK1(48)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * MAC Status Registers (Table 9-17)
+ * Also used for the MAC Interrupt Mask Register (Table 9-18)
+ * Register: MAC_STATUS_0
+ * Register: MAC_STATUS_1
+ * Register: MAC_STATUS_2
+ * Register: MAC_INT_MASK_0
+ * Register: MAC_INT_MASK_1
+ * Register: MAC_INT_MASK_2
+ */
+
+/*
+ * Use these constants to shift the appropriate channel
+ * into the CH0 position so the same tests can be used
+ * on each channel.
+ */
+
+#define S_MAC_RX_CH0                _SB_MAKE64(0)
+#define S_MAC_RX_CH1                _SB_MAKE64(8)
+#define S_MAC_TX_CH0                _SB_MAKE64(16)
+#define S_MAC_TX_CH1                _SB_MAKE64(24)
+
+#define S_MAC_TXCHANNELS	    _SB_MAKE64(16)	/* this is 1st TX chan */
+#define S_MAC_CHANWIDTH             _SB_MAKE64(8)	/* bits between channels */
+
+/*
+ *  These are the same as RX channel 0.  The idea here
+ *  is that you'll use one of the "S_" things above
+ *  and pass just the six bits to a DMA-channel-specific ISR
+ */
+#define M_MAC_INT_CHANNEL           _SB_MAKEMASK(8, 0)
+#define M_MAC_INT_EOP_COUNT         _SB_MAKEMASK1(0)
+#define M_MAC_INT_EOP_TIMER         _SB_MAKEMASK1(1)
+#define M_MAC_INT_EOP_SEEN          _SB_MAKEMASK1(2)
+#define M_MAC_INT_HWM               _SB_MAKEMASK1(3)
+#define M_MAC_INT_LWM               _SB_MAKEMASK1(4)
+#define M_MAC_INT_DSCR              _SB_MAKEMASK1(5)
+#define M_MAC_INT_ERR               _SB_MAKEMASK1(6)
+#define M_MAC_INT_DZERO             _SB_MAKEMASK1(7)	/* only for TX channels */
+#define M_MAC_INT_DROP              _SB_MAKEMASK1(7)	/* only for RX channels */
+
+/*
+ * In the following definitions we use ch (0/1) and txrx (TX=1, RX=0, see
+ * also DMA_TX/DMA_RX in sb_regs.h).
+ */
+#define S_MAC_STATUS_CH_OFFSET(ch, txrx) _SB_MAKE64(((ch) + 2 * (txrx)) * S_MAC_CHANWIDTH)
+
+#define M_MAC_STATUS_CHANNEL(ch, txrx)   _SB_MAKEVALUE(_SB_MAKEMASK(8, 0), S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_EOP_COUNT(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_COUNT, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_EOP_TIMER(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_TIMER, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_EOP_SEEN(ch, txrx)  _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_HWM(ch, txrx)       _SB_MAKEVALUE(M_MAC_INT_HWM, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_LWM(ch, txrx)       _SB_MAKEVALUE(M_MAC_INT_LWM, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DSCR(ch, txrx)      _SB_MAKEVALUE(M_MAC_INT_DSCR, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_ERR(ch, txrx)       _SB_MAKEVALUE(M_MAC_INT_ERR, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DZERO(ch, txrx)     _SB_MAKEVALUE(M_MAC_INT_DZERO, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DROP(ch, txrx)      _SB_MAKEVALUE(M_MAC_INT_DROP, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_OTHER_ERR           _SB_MAKEVALUE(_SB_MAKEMASK(7, 0), 40)
+
+
+#define M_MAC_RX_UNDRFL             _SB_MAKEMASK1(40)
+#define M_MAC_RX_OVRFL              _SB_MAKEMASK1(41)
+#define M_MAC_TX_UNDRFL             _SB_MAKEMASK1(42)
+#define M_MAC_TX_OVRFL              _SB_MAKEMASK1(43)
+#define M_MAC_LTCOL_ERR             _SB_MAKEMASK1(44)
+#define M_MAC_EXCOL_ERR             _SB_MAKEMASK1(45)
+#define M_MAC_CNTR_OVRFL_ERR        _SB_MAKEMASK1(46)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_SPLIT_EN		    _SB_MAKEMASK1(47) 	/* interrupt mask only */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_MAC_COUNTER_ADDR          _SB_MAKE64(47)
+#define M_MAC_COUNTER_ADDR          _SB_MAKEMASK(5, S_MAC_COUNTER_ADDR)
+#define V_MAC_COUNTER_ADDR(x)       _SB_MAKEVALUE(x, S_MAC_COUNTER_ADDR)
+#define G_MAC_COUNTER_ADDR(x)       _SB_GETVALUE(x, S_MAC_COUNTER_ADDR, M_MAC_COUNTER_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TX_PAUSE_ON	    _SB_MAKEMASK1(52)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*
+ * MAC Fifo Pointer Registers (Table 9-19)    [Debug register]
+ * Register: MAC_FIFO_PTRS_0
+ * Register: MAC_FIFO_PTRS_1
+ * Register: MAC_FIFO_PTRS_2
+ */
+
+#define S_MAC_TX_WRPTR              _SB_MAKE64(0)
+#define M_MAC_TX_WRPTR              _SB_MAKEMASK(6, S_MAC_TX_WRPTR)
+#define V_MAC_TX_WRPTR(x)           _SB_MAKEVALUE(x, S_MAC_TX_WRPTR)
+#define G_MAC_TX_WRPTR(x)           _SB_GETVALUE(x, S_MAC_TX_WRPTR, M_MAC_TX_WRPTR)
+
+#define S_MAC_TX_RDPTR              _SB_MAKE64(8)
+#define M_MAC_TX_RDPTR              _SB_MAKEMASK(6, S_MAC_TX_RDPTR)
+#define V_MAC_TX_RDPTR(x)           _SB_MAKEVALUE(x, S_MAC_TX_RDPTR)
+#define G_MAC_TX_RDPTR(x)           _SB_GETVALUE(x, S_MAC_TX_RDPTR, M_MAC_TX_RDPTR)
+
+#define S_MAC_RX_WRPTR              _SB_MAKE64(16)
+#define M_MAC_RX_WRPTR              _SB_MAKEMASK(6, S_MAC_RX_WRPTR)
+#define V_MAC_RX_WRPTR(x)           _SB_MAKEVALUE(x, S_MAC_RX_WRPTR)
+#define G_MAC_RX_WRPTR(x)           _SB_GETVALUE(x, S_MAC_RX_WRPTR, M_MAC_TX_WRPTR)
+
+#define S_MAC_RX_RDPTR              _SB_MAKE64(24)
+#define M_MAC_RX_RDPTR              _SB_MAKEMASK(6, S_MAC_RX_RDPTR)
+#define V_MAC_RX_RDPTR(x)           _SB_MAKEVALUE(x, S_MAC_RX_RDPTR)
+#define G_MAC_RX_RDPTR(x)           _SB_GETVALUE(x, S_MAC_RX_RDPTR, M_MAC_TX_RDPTR)
+
+/*
+ * MAC Fifo End Of Packet Count Registers (Table 9-20)  [Debug register]
+ * Register: MAC_EOPCNT_0
+ * Register: MAC_EOPCNT_1
+ * Register: MAC_EOPCNT_2
+ */
+
+#define S_MAC_TX_EOP_COUNTER        _SB_MAKE64(0)
+#define M_MAC_TX_EOP_COUNTER        _SB_MAKEMASK(6, S_MAC_TX_EOP_COUNTER)
+#define V_MAC_TX_EOP_COUNTER(x)     _SB_MAKEVALUE(x, S_MAC_TX_EOP_COUNTER)
+#define G_MAC_TX_EOP_COUNTER(x)     _SB_GETVALUE(x, S_MAC_TX_EOP_COUNTER, M_MAC_TX_EOP_COUNTER)
+
+#define S_MAC_RX_EOP_COUNTER        _SB_MAKE64(8)
+#define M_MAC_RX_EOP_COUNTER        _SB_MAKEMASK(6, S_MAC_RX_EOP_COUNTER)
+#define V_MAC_RX_EOP_COUNTER(x)     _SB_MAKEVALUE(x, S_MAC_RX_EOP_COUNTER)
+#define G_MAC_RX_EOP_COUNTER(x)     _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER)
+
+/*
+ * MAC Recieve Address Filter Exact Match Registers (Table 9-21)
+ * Registers: MAC_ADDR0_0 through MAC_ADDR7_0
+ * Registers: MAC_ADDR0_1 through MAC_ADDR7_1
+ * Registers: MAC_ADDR0_2 through MAC_ADDR7_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Receive Address Filter Mask Registers
+ * Registers: MAC_ADDRMASK0_0 and MAC_ADDRMASK0_1
+ * Registers: MAC_ADDRMASK1_0 and MAC_ADDRMASK1_1
+ * Registers: MAC_ADDRMASK2_0 and MAC_ADDRMASK2_1
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Recieve Address Filter Hash Match Registers (Table 9-22)
+ * Registers: MAC_HASH0_0 through MAC_HASH7_0
+ * Registers: MAC_HASH0_1 through MAC_HASH7_1
+ * Registers: MAC_HASH0_2 through MAC_HASH7_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Transmit Source Address Registers (Table 9-23)
+ * Register: MAC_ETHERNET_ADDR_0
+ * Register: MAC_ETHERNET_ADDR_1
+ * Register: MAC_ETHERNET_ADDR_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Packet Type Configuration Register
+ * Register: MAC_TYPE_CFG_0
+ * Register: MAC_TYPE_CFG_1
+ * Register: MAC_TYPE_CFG_2
+ */
+
+#define S_TYPECFG_TYPESIZE      _SB_MAKE64(16)
+
+#define S_TYPECFG_TYPE0		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE0         _SB_MAKEMASK(16, S_TYPECFG_TYPE0)
+#define V_TYPECFG_TYPE0(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE0)
+#define G_TYPECFG_TYPE0(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE0, M_TYPECFG_TYPE0)
+
+#define S_TYPECFG_TYPE1		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE1         _SB_MAKEMASK(16, S_TYPECFG_TYPE1)
+#define V_TYPECFG_TYPE1(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE1)
+#define G_TYPECFG_TYPE1(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE1, M_TYPECFG_TYPE1)
+
+#define S_TYPECFG_TYPE2		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE2         _SB_MAKEMASK(16, S_TYPECFG_TYPE2)
+#define V_TYPECFG_TYPE2(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE2)
+#define G_TYPECFG_TYPE2(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE2, M_TYPECFG_TYPE2)
+
+#define S_TYPECFG_TYPE3		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE3         _SB_MAKEMASK(16, S_TYPECFG_TYPE3)
+#define V_TYPECFG_TYPE3(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE3)
+#define G_TYPECFG_TYPE3(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE3, M_TYPECFG_TYPE3)
+
+/*
+ * MAC Receive Address Filter Control Registers (Table 9-24)
+ * Register: MAC_ADFILTER_CFG_0
+ * Register: MAC_ADFILTER_CFG_1
+ * Register: MAC_ADFILTER_CFG_2
+ */
+
+#define M_MAC_ALLPKT_EN	        _SB_MAKEMASK1(0)
+#define M_MAC_UCAST_EN          _SB_MAKEMASK1(1)
+#define M_MAC_UCAST_INV         _SB_MAKEMASK1(2)
+#define M_MAC_MCAST_EN          _SB_MAKEMASK1(3)
+#define M_MAC_MCAST_INV         _SB_MAKEMASK1(4)
+#define M_MAC_BCAST_EN          _SB_MAKEMASK1(5)
+#define M_MAC_DIRECT_INV        _SB_MAKEMASK1(6)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_ALLMCAST_EN	_SB_MAKEMASK1(7)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_MAC_IPHDR_OFFSET      _SB_MAKE64(8)
+#define M_MAC_IPHDR_OFFSET      _SB_MAKEMASK(8, S_MAC_IPHDR_OFFSET)
+#define V_MAC_IPHDR_OFFSET(x)	_SB_MAKEVALUE(x, S_MAC_IPHDR_OFFSET)
+#define G_MAC_IPHDR_OFFSET(x)	_SB_GETVALUE(x, S_MAC_IPHDR_OFFSET, M_MAC_IPHDR_OFFSET)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_MAC_RX_CRC_OFFSET     _SB_MAKE64(16)
+#define M_MAC_RX_CRC_OFFSET     _SB_MAKEMASK(8, S_MAC_RX_CRC_OFFSET)
+#define V_MAC_RX_CRC_OFFSET(x)	_SB_MAKEVALUE(x, S_MAC_RX_CRC_OFFSET)
+#define G_MAC_RX_CRC_OFFSET(x)	_SB_GETVALUE(x, S_MAC_RX_CRC_OFFSET, M_MAC_RX_CRC_OFFSET)
+
+#define S_MAC_RX_PKT_OFFSET     _SB_MAKE64(24)
+#define M_MAC_RX_PKT_OFFSET     _SB_MAKEMASK(8, S_MAC_RX_PKT_OFFSET)
+#define V_MAC_RX_PKT_OFFSET(x)	_SB_MAKEVALUE(x, S_MAC_RX_PKT_OFFSET)
+#define G_MAC_RX_PKT_OFFSET(x)	_SB_GETVALUE(x, S_MAC_RX_PKT_OFFSET, M_MAC_RX_PKT_OFFSET)
+
+#define M_MAC_FWDPAUSE_EN	_SB_MAKEMASK1(32)
+#define M_MAC_VLAN_DET_EN	_SB_MAKEMASK1(33)
+
+#define S_MAC_RX_CH_MSN_SEL     _SB_MAKE64(34)
+#define M_MAC_RX_CH_MSN_SEL     _SB_MAKEMASK(8, S_MAC_RX_CH_MSN_SEL)
+#define V_MAC_RX_CH_MSN_SEL(x)	_SB_MAKEVALUE(x, S_MAC_RX_CH_MSN_SEL)
+#define G_MAC_RX_CH_MSN_SEL(x)	_SB_GETVALUE(x, S_MAC_RX_CH_MSN_SEL, M_MAC_RX_CH_MSN_SEL)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*
+ * MAC Receive Channel Select Registers (Table 9-25)
+ */
+
+/* no bitfields */
+
+/*
+ * MAC MII Management Interface Registers (Table 9-26)
+ * Register: MAC_MDIO_0
+ * Register: MAC_MDIO_1
+ * Register: MAC_MDIO_2
+ */
+
+#define S_MAC_MDC		0
+#define S_MAC_MDIO_DIR		1
+#define S_MAC_MDIO_OUT		2
+#define S_MAC_GENC		3
+#define S_MAC_MDIO_IN		4
+
+#define M_MAC_MDC		_SB_MAKEMASK1(S_MAC_MDC)
+#define M_MAC_MDIO_DIR		_SB_MAKEMASK1(S_MAC_MDIO_DIR)
+#define M_MAC_MDIO_DIR_INPUT	_SB_MAKEMASK1(S_MAC_MDIO_DIR)
+#define M_MAC_MDIO_OUT		_SB_MAKEMASK1(S_MAC_MDIO_OUT)
+#define M_MAC_GENC		_SB_MAKEMASK1(S_MAC_GENC)
+#define M_MAC_MDIO_IN		_SB_MAKEMASK1(S_MAC_MDIO_IN)
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_mc.h b/arch/mips/include/asm/sibyte/sb1250_mc.h
new file mode 100644
index 0000000..1eb1b5a
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_mc.h
@@ -0,0 +1,550 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Memory Controller constants              File: sb1250_mc.h
+    *
+    *  This module contains constants and macros useful for
+    *  programming the memory controller.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000, 2001, 2002, 2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_MC_H
+#define _SB1250_MC_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Memory Channel Config Register (table 6-14)
+ */
+
+#define S_MC_RESERVED0              0
+#define M_MC_RESERVED0              _SB_MAKEMASK(8, S_MC_RESERVED0)
+
+#define S_MC_CHANNEL_SEL            8
+#define M_MC_CHANNEL_SEL            _SB_MAKEMASK(8, S_MC_CHANNEL_SEL)
+#define V_MC_CHANNEL_SEL(x)         _SB_MAKEVALUE(x, S_MC_CHANNEL_SEL)
+#define G_MC_CHANNEL_SEL(x)         _SB_GETVALUE(x, S_MC_CHANNEL_SEL, M_MC_CHANNEL_SEL)
+
+#define S_MC_BANK0_MAP              16
+#define M_MC_BANK0_MAP              _SB_MAKEMASK(4, S_MC_BANK0_MAP)
+#define V_MC_BANK0_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK0_MAP)
+#define G_MC_BANK0_MAP(x)           _SB_GETVALUE(x, S_MC_BANK0_MAP, M_MC_BANK0_MAP)
+
+#define K_MC_BANK0_MAP_DEFAULT      0x00
+#define V_MC_BANK0_MAP_DEFAULT      V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT)
+
+#define S_MC_BANK1_MAP              20
+#define M_MC_BANK1_MAP              _SB_MAKEMASK(4, S_MC_BANK1_MAP)
+#define V_MC_BANK1_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK1_MAP)
+#define G_MC_BANK1_MAP(x)           _SB_GETVALUE(x, S_MC_BANK1_MAP, M_MC_BANK1_MAP)
+
+#define K_MC_BANK1_MAP_DEFAULT      0x08
+#define V_MC_BANK1_MAP_DEFAULT      V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT)
+
+#define S_MC_BANK2_MAP              24
+#define M_MC_BANK2_MAP              _SB_MAKEMASK(4, S_MC_BANK2_MAP)
+#define V_MC_BANK2_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK2_MAP)
+#define G_MC_BANK2_MAP(x)           _SB_GETVALUE(x, S_MC_BANK2_MAP, M_MC_BANK2_MAP)
+
+#define K_MC_BANK2_MAP_DEFAULT      0x09
+#define V_MC_BANK2_MAP_DEFAULT      V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT)
+
+#define S_MC_BANK3_MAP              28
+#define M_MC_BANK3_MAP              _SB_MAKEMASK(4, S_MC_BANK3_MAP)
+#define V_MC_BANK3_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK3_MAP)
+#define G_MC_BANK3_MAP(x)           _SB_GETVALUE(x, S_MC_BANK3_MAP, M_MC_BANK3_MAP)
+
+#define K_MC_BANK3_MAP_DEFAULT      0x0C
+#define V_MC_BANK3_MAP_DEFAULT      V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT)
+
+#define M_MC_RESERVED1              _SB_MAKEMASK(8, 32)
+
+#define S_MC_QUEUE_SIZE		    40
+#define M_MC_QUEUE_SIZE             _SB_MAKEMASK(4, S_MC_QUEUE_SIZE)
+#define V_MC_QUEUE_SIZE(x)          _SB_MAKEVALUE(x, S_MC_QUEUE_SIZE)
+#define G_MC_QUEUE_SIZE(x)          _SB_GETVALUE(x, S_MC_QUEUE_SIZE, M_MC_QUEUE_SIZE)
+#define V_MC_QUEUE_SIZE_DEFAULT     V_MC_QUEUE_SIZE(0x0A)
+
+#define S_MC_AGE_LIMIT              44
+#define M_MC_AGE_LIMIT              _SB_MAKEMASK(4, S_MC_AGE_LIMIT)
+#define V_MC_AGE_LIMIT(x)           _SB_MAKEVALUE(x, S_MC_AGE_LIMIT)
+#define G_MC_AGE_LIMIT(x)           _SB_GETVALUE(x, S_MC_AGE_LIMIT, M_MC_AGE_LIMIT)
+#define V_MC_AGE_LIMIT_DEFAULT      V_MC_AGE_LIMIT(8)
+
+#define S_MC_WR_LIMIT               48
+#define M_MC_WR_LIMIT               _SB_MAKEMASK(4, S_MC_WR_LIMIT)
+#define V_MC_WR_LIMIT(x)            _SB_MAKEVALUE(x, S_MC_WR_LIMIT)
+#define G_MC_WR_LIMIT(x)            _SB_GETVALUE(x, S_MC_WR_LIMIT, M_MC_WR_LIMIT)
+#define V_MC_WR_LIMIT_DEFAULT       V_MC_WR_LIMIT(5)
+
+#define M_MC_IOB1HIGHPRIORITY	    _SB_MAKEMASK1(52)
+
+#define M_MC_RESERVED2              _SB_MAKEMASK(3, 53)
+
+#define S_MC_CS_MODE                56
+#define M_MC_CS_MODE                _SB_MAKEMASK(4, S_MC_CS_MODE)
+#define V_MC_CS_MODE(x)             _SB_MAKEVALUE(x, S_MC_CS_MODE)
+#define G_MC_CS_MODE(x)             _SB_GETVALUE(x, S_MC_CS_MODE, M_MC_CS_MODE)
+
+#define K_MC_CS_MODE_MSB_CS         0
+#define K_MC_CS_MODE_INTLV_CS       15
+#define K_MC_CS_MODE_MIXED_CS_10    12
+#define K_MC_CS_MODE_MIXED_CS_30    6
+#define K_MC_CS_MODE_MIXED_CS_32    3
+
+#define V_MC_CS_MODE_MSB_CS         V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS)
+#define V_MC_CS_MODE_INTLV_CS       V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS)
+#define V_MC_CS_MODE_MIXED_CS_10    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_10)
+#define V_MC_CS_MODE_MIXED_CS_30    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_30)
+#define V_MC_CS_MODE_MIXED_CS_32    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_32)
+
+#define M_MC_ECC_DISABLE            _SB_MAKEMASK1(60)
+#define M_MC_BERR_DISABLE           _SB_MAKEMASK1(61)
+#define M_MC_FORCE_SEQ              _SB_MAKEMASK1(62)
+#define M_MC_DEBUG                  _SB_MAKEMASK1(63)
+
+#define V_MC_CONFIG_DEFAULT     V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \
+				V_MC_BANK0_MAP_DEFAULT | V_MC_BANK1_MAP_DEFAULT | \
+				V_MC_BANK2_MAP_DEFAULT | V_MC_BANK3_MAP_DEFAULT | V_MC_CHANNEL_SEL(0) | \
+                                M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT
+
+
+/*
+ * Memory clock config register (Table 6-15)
+ *
+ * Note: this field has been updated to be consistent with the errata to 0.2
+ */
+
+#define S_MC_CLK_RATIO              0
+#define M_MC_CLK_RATIO              _SB_MAKEMASK(4, S_MC_CLK_RATIO)
+#define V_MC_CLK_RATIO(x)           _SB_MAKEVALUE(x, S_MC_CLK_RATIO)
+#define G_MC_CLK_RATIO(x)           _SB_GETVALUE(x, S_MC_CLK_RATIO, M_MC_CLK_RATIO)
+
+#define K_MC_CLK_RATIO_2X           4
+#define K_MC_CLK_RATIO_25X          5
+#define K_MC_CLK_RATIO_3X           6
+#define K_MC_CLK_RATIO_35X          7
+#define K_MC_CLK_RATIO_4X           8
+#define K_MC_CLK_RATIO_45X	    9
+
+#define V_MC_CLK_RATIO_2X	    V_MC_CLK_RATIO(K_MC_CLK_RATIO_2X)
+#define V_MC_CLK_RATIO_25X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X)
+#define V_MC_CLK_RATIO_3X           V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X)
+#define V_MC_CLK_RATIO_35X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X)
+#define V_MC_CLK_RATIO_4X           V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X)
+#define V_MC_CLK_RATIO_45X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X)
+#define V_MC_CLK_RATIO_DEFAULT      V_MC_CLK_RATIO_25X
+
+#define S_MC_REF_RATE                8
+#define M_MC_REF_RATE                _SB_MAKEMASK(8, S_MC_REF_RATE)
+#define V_MC_REF_RATE(x)             _SB_MAKEVALUE(x, S_MC_REF_RATE)
+#define G_MC_REF_RATE(x)             _SB_GETVALUE(x, S_MC_REF_RATE, M_MC_REF_RATE)
+
+#define K_MC_REF_RATE_100MHz         0x62
+#define K_MC_REF_RATE_133MHz         0x81
+#define K_MC_REF_RATE_200MHz         0xC4
+
+#define V_MC_REF_RATE_100MHz         V_MC_REF_RATE(K_MC_REF_RATE_100MHz)
+#define V_MC_REF_RATE_133MHz         V_MC_REF_RATE(K_MC_REF_RATE_133MHz)
+#define V_MC_REF_RATE_200MHz         V_MC_REF_RATE(K_MC_REF_RATE_200MHz)
+#define V_MC_REF_RATE_DEFAULT        V_MC_REF_RATE_100MHz
+
+#define S_MC_CLOCK_DRIVE             16
+#define M_MC_CLOCK_DRIVE             _SB_MAKEMASK(4, S_MC_CLOCK_DRIVE)
+#define V_MC_CLOCK_DRIVE(x)          _SB_MAKEVALUE(x, S_MC_CLOCK_DRIVE)
+#define G_MC_CLOCK_DRIVE(x)          _SB_GETVALUE(x, S_MC_CLOCK_DRIVE, M_MC_CLOCK_DRIVE)
+#define V_MC_CLOCK_DRIVE_DEFAULT     V_MC_CLOCK_DRIVE(0xF)
+
+#define S_MC_DATA_DRIVE              20
+#define M_MC_DATA_DRIVE              _SB_MAKEMASK(4, S_MC_DATA_DRIVE)
+#define V_MC_DATA_DRIVE(x)           _SB_MAKEVALUE(x, S_MC_DATA_DRIVE)
+#define G_MC_DATA_DRIVE(x)           _SB_GETVALUE(x, S_MC_DATA_DRIVE, M_MC_DATA_DRIVE)
+#define V_MC_DATA_DRIVE_DEFAULT      V_MC_DATA_DRIVE(0x0)
+
+#define S_MC_ADDR_DRIVE              24
+#define M_MC_ADDR_DRIVE              _SB_MAKEMASK(4, S_MC_ADDR_DRIVE)
+#define V_MC_ADDR_DRIVE(x)           _SB_MAKEVALUE(x, S_MC_ADDR_DRIVE)
+#define G_MC_ADDR_DRIVE(x)           _SB_GETVALUE(x, S_MC_ADDR_DRIVE, M_MC_ADDR_DRIVE)
+#define V_MC_ADDR_DRIVE_DEFAULT      V_MC_ADDR_DRIVE(0x0)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MC_REF_DISABLE             _SB_MAKEMASK1(30)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define M_MC_DLL_BYPASS              _SB_MAKEMASK1(31)
+
+#define S_MC_DQI_SKEW               32
+#define M_MC_DQI_SKEW               _SB_MAKEMASK(8, S_MC_DQI_SKEW)
+#define V_MC_DQI_SKEW(x)            _SB_MAKEVALUE(x, S_MC_DQI_SKEW)
+#define G_MC_DQI_SKEW(x)            _SB_GETVALUE(x, S_MC_DQI_SKEW, M_MC_DQI_SKEW)
+#define V_MC_DQI_SKEW_DEFAULT       V_MC_DQI_SKEW(0)
+
+#define S_MC_DQO_SKEW               40
+#define M_MC_DQO_SKEW               _SB_MAKEMASK(8, S_MC_DQO_SKEW)
+#define V_MC_DQO_SKEW(x)            _SB_MAKEVALUE(x, S_MC_DQO_SKEW)
+#define G_MC_DQO_SKEW(x)            _SB_GETVALUE(x, S_MC_DQO_SKEW, M_MC_DQO_SKEW)
+#define V_MC_DQO_SKEW_DEFAULT       V_MC_DQO_SKEW(0)
+
+#define S_MC_ADDR_SKEW               48
+#define M_MC_ADDR_SKEW               _SB_MAKEMASK(8, S_MC_ADDR_SKEW)
+#define V_MC_ADDR_SKEW(x)            _SB_MAKEVALUE(x, S_MC_ADDR_SKEW)
+#define G_MC_ADDR_SKEW(x)            _SB_GETVALUE(x, S_MC_ADDR_SKEW, M_MC_ADDR_SKEW)
+#define V_MC_ADDR_SKEW_DEFAULT       V_MC_ADDR_SKEW(0x0F)
+
+#define S_MC_DLL_DEFAULT             56
+#define M_MC_DLL_DEFAULT             _SB_MAKEMASK(8, S_MC_DLL_DEFAULT)
+#define V_MC_DLL_DEFAULT(x)          _SB_MAKEVALUE(x, S_MC_DLL_DEFAULT)
+#define G_MC_DLL_DEFAULT(x)          _SB_GETVALUE(x, S_MC_DLL_DEFAULT, M_MC_DLL_DEFAULT)
+#define V_MC_DLL_DEFAULT_DEFAULT     V_MC_DLL_DEFAULT(0x10)
+
+#define V_MC_CLKCONFIG_DEFAULT       V_MC_DLL_DEFAULT_DEFAULT |  \
+                                     V_MC_ADDR_SKEW_DEFAULT | \
+                                     V_MC_DQO_SKEW_DEFAULT | \
+                                     V_MC_DQI_SKEW_DEFAULT | \
+                                     V_MC_ADDR_DRIVE_DEFAULT | \
+                                     V_MC_DATA_DRIVE_DEFAULT | \
+                                     V_MC_CLOCK_DRIVE_DEFAULT | \
+                                     V_MC_REF_RATE_DEFAULT
+
+
+
+/*
+ * DRAM Command Register (Table 6-13)
+ */
+
+#define S_MC_COMMAND                0
+#define M_MC_COMMAND                _SB_MAKEMASK(4, S_MC_COMMAND)
+#define V_MC_COMMAND(x)             _SB_MAKEVALUE(x, S_MC_COMMAND)
+#define G_MC_COMMAND(x)             _SB_GETVALUE(x, S_MC_COMMAND, M_MC_COMMAND)
+
+#define K_MC_COMMAND_EMRS           0
+#define K_MC_COMMAND_MRS            1
+#define K_MC_COMMAND_PRE            2
+#define K_MC_COMMAND_AR             3
+#define K_MC_COMMAND_SETRFSH        4
+#define K_MC_COMMAND_CLRRFSH        5
+#define K_MC_COMMAND_SETPWRDN       6
+#define K_MC_COMMAND_CLRPWRDN       7
+
+#define V_MC_COMMAND_EMRS           V_MC_COMMAND(K_MC_COMMAND_EMRS)
+#define V_MC_COMMAND_MRS            V_MC_COMMAND(K_MC_COMMAND_MRS)
+#define V_MC_COMMAND_PRE            V_MC_COMMAND(K_MC_COMMAND_PRE)
+#define V_MC_COMMAND_AR             V_MC_COMMAND(K_MC_COMMAND_AR)
+#define V_MC_COMMAND_SETRFSH        V_MC_COMMAND(K_MC_COMMAND_SETRFSH)
+#define V_MC_COMMAND_CLRRFSH        V_MC_COMMAND(K_MC_COMMAND_CLRRFSH)
+#define V_MC_COMMAND_SETPWRDN       V_MC_COMMAND(K_MC_COMMAND_SETPWRDN)
+#define V_MC_COMMAND_CLRPWRDN       V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN)
+
+#define M_MC_CS0                    _SB_MAKEMASK1(4)
+#define M_MC_CS1                    _SB_MAKEMASK1(5)
+#define M_MC_CS2                    _SB_MAKEMASK1(6)
+#define M_MC_CS3                    _SB_MAKEMASK1(7)
+
+/*
+ * DRAM Mode Register (Table 6-14)
+ */
+
+#define S_MC_EMODE                  0
+#define M_MC_EMODE                  _SB_MAKEMASK(15, S_MC_EMODE)
+#define V_MC_EMODE(x)               _SB_MAKEVALUE(x, S_MC_EMODE)
+#define G_MC_EMODE(x)               _SB_GETVALUE(x, S_MC_EMODE, M_MC_EMODE)
+#define V_MC_EMODE_DEFAULT          V_MC_EMODE(0)
+
+#define S_MC_MODE                   16
+#define M_MC_MODE                   _SB_MAKEMASK(15, S_MC_MODE)
+#define V_MC_MODE(x)                _SB_MAKEVALUE(x, S_MC_MODE)
+#define G_MC_MODE(x)                _SB_GETVALUE(x, S_MC_MODE, M_MC_MODE)
+#define V_MC_MODE_DEFAULT           V_MC_MODE(0x22)
+
+#define S_MC_DRAM_TYPE              32
+#define M_MC_DRAM_TYPE              _SB_MAKEMASK(3, S_MC_DRAM_TYPE)
+#define V_MC_DRAM_TYPE(x)           _SB_MAKEVALUE(x, S_MC_DRAM_TYPE)
+#define G_MC_DRAM_TYPE(x)           _SB_GETVALUE(x, S_MC_DRAM_TYPE, M_MC_DRAM_TYPE)
+
+#define K_MC_DRAM_TYPE_JEDEC        0
+#define K_MC_DRAM_TYPE_FCRAM        1
+#define K_MC_DRAM_TYPE_SGRAM	    2
+
+#define V_MC_DRAM_TYPE_JEDEC        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC)
+#define V_MC_DRAM_TYPE_FCRAM        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM)
+#define V_MC_DRAM_TYPE_SGRAM        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM)
+
+#define M_MC_EXTERNALDECODE	    _SB_MAKEMASK1(35)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MC_PRE_ON_A8              _SB_MAKEMASK1(36)
+#define M_MC_RAM_WITH_A13           _SB_MAKEMASK1(37)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+
+/*
+ * SDRAM Timing Register  (Table 6-15)
+ */
+
+#define M_MC_w2rIDLE_TWOCYCLES	  _SB_MAKEMASK1(60)
+#define M_MC_r2wIDLE_TWOCYCLES	  _SB_MAKEMASK1(61)
+#define M_MC_r2rIDLE_TWOCYCLES	  _SB_MAKEMASK1(62)
+
+#define S_MC_tFIFO                56
+#define M_MC_tFIFO                _SB_MAKEMASK(4, S_MC_tFIFO)
+#define V_MC_tFIFO(x)             _SB_MAKEVALUE(x, S_MC_tFIFO)
+#define G_MC_tFIFO(x)             _SB_GETVALUE(x, S_MC_tFIFO, M_MC_tFIFO)
+#define K_MC_tFIFO_DEFAULT        1
+#define V_MC_tFIFO_DEFAULT        V_MC_tFIFO(K_MC_tFIFO_DEFAULT)
+
+#define S_MC_tRFC                 52
+#define M_MC_tRFC                 _SB_MAKEMASK(4, S_MC_tRFC)
+#define V_MC_tRFC(x)              _SB_MAKEVALUE(x, S_MC_tRFC)
+#define G_MC_tRFC(x)              _SB_GETVALUE(x, S_MC_tRFC, M_MC_tRFC)
+#define K_MC_tRFC_DEFAULT         12
+#define V_MC_tRFC_DEFAULT         V_MC_tRFC(K_MC_tRFC_DEFAULT)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3)
+#define M_MC_tRFC_PLUS16          _SB_MAKEMASK1(51)	/* 1250C3 and later.  */
+#endif
+
+#define S_MC_tCwCr                40
+#define M_MC_tCwCr                _SB_MAKEMASK(4, S_MC_tCwCr)
+#define V_MC_tCwCr(x)             _SB_MAKEVALUE(x, S_MC_tCwCr)
+#define G_MC_tCwCr(x)             _SB_GETVALUE(x, S_MC_tCwCr, M_MC_tCwCr)
+#define K_MC_tCwCr_DEFAULT        4
+#define V_MC_tCwCr_DEFAULT        V_MC_tCwCr(K_MC_tCwCr_DEFAULT)
+
+#define S_MC_tRCr                 28
+#define M_MC_tRCr                 _SB_MAKEMASK(4, S_MC_tRCr)
+#define V_MC_tRCr(x)              _SB_MAKEVALUE(x, S_MC_tRCr)
+#define G_MC_tRCr(x)              _SB_GETVALUE(x, S_MC_tRCr, M_MC_tRCr)
+#define K_MC_tRCr_DEFAULT         9
+#define V_MC_tRCr_DEFAULT         V_MC_tRCr(K_MC_tRCr_DEFAULT)
+
+#define S_MC_tRCw                 24
+#define M_MC_tRCw                 _SB_MAKEMASK(4, S_MC_tRCw)
+#define V_MC_tRCw(x)              _SB_MAKEVALUE(x, S_MC_tRCw)
+#define G_MC_tRCw(x)              _SB_GETVALUE(x, S_MC_tRCw, M_MC_tRCw)
+#define K_MC_tRCw_DEFAULT         10
+#define V_MC_tRCw_DEFAULT         V_MC_tRCw(K_MC_tRCw_DEFAULT)
+
+#define S_MC_tRRD                 20
+#define M_MC_tRRD                 _SB_MAKEMASK(4, S_MC_tRRD)
+#define V_MC_tRRD(x)              _SB_MAKEVALUE(x, S_MC_tRRD)
+#define G_MC_tRRD(x)              _SB_GETVALUE(x, S_MC_tRRD, M_MC_tRRD)
+#define K_MC_tRRD_DEFAULT         2
+#define V_MC_tRRD_DEFAULT         V_MC_tRRD(K_MC_tRRD_DEFAULT)
+
+#define S_MC_tRP                  16
+#define M_MC_tRP                  _SB_MAKEMASK(4, S_MC_tRP)
+#define V_MC_tRP(x)               _SB_MAKEVALUE(x, S_MC_tRP)
+#define G_MC_tRP(x)               _SB_GETVALUE(x, S_MC_tRP, M_MC_tRP)
+#define K_MC_tRP_DEFAULT          4
+#define V_MC_tRP_DEFAULT          V_MC_tRP(K_MC_tRP_DEFAULT)
+
+#define S_MC_tCwD                 8
+#define M_MC_tCwD                 _SB_MAKEMASK(4, S_MC_tCwD)
+#define V_MC_tCwD(x)              _SB_MAKEVALUE(x, S_MC_tCwD)
+#define G_MC_tCwD(x)              _SB_GETVALUE(x, S_MC_tCwD, M_MC_tCwD)
+#define K_MC_tCwD_DEFAULT         1
+#define V_MC_tCwD_DEFAULT         V_MC_tCwD(K_MC_tCwD_DEFAULT)
+
+#define M_tCrDh                   _SB_MAKEMASK1(7)
+#define M_MC_tCrDh		  M_tCrDh
+
+#define S_MC_tCrD                 4
+#define M_MC_tCrD                 _SB_MAKEMASK(3, S_MC_tCrD)
+#define V_MC_tCrD(x)              _SB_MAKEVALUE(x, S_MC_tCrD)
+#define G_MC_tCrD(x)              _SB_GETVALUE(x, S_MC_tCrD, M_MC_tCrD)
+#define K_MC_tCrD_DEFAULT         2
+#define V_MC_tCrD_DEFAULT         V_MC_tCrD(K_MC_tCrD_DEFAULT)
+
+#define S_MC_tRCD                 0
+#define M_MC_tRCD                 _SB_MAKEMASK(4, S_MC_tRCD)
+#define V_MC_tRCD(x)              _SB_MAKEVALUE(x, S_MC_tRCD)
+#define G_MC_tRCD(x)              _SB_GETVALUE(x, S_MC_tRCD, M_MC_tRCD)
+#define K_MC_tRCD_DEFAULT         3
+#define V_MC_tRCD_DEFAULT         V_MC_tRCD(K_MC_tRCD_DEFAULT)
+
+#define V_MC_TIMING_DEFAULT     V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \
+                                V_MC_tRFC(K_MC_tRFC_DEFAULT) | \
+                                V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \
+                                V_MC_tRCr(K_MC_tRCr_DEFAULT) | \
+                                V_MC_tRCw(K_MC_tRCw_DEFAULT) | \
+                                V_MC_tRRD(K_MC_tRRD_DEFAULT) | \
+                                V_MC_tRP(K_MC_tRP_DEFAULT) | \
+                                V_MC_tCwD(K_MC_tCwD_DEFAULT) | \
+                                V_MC_tCrD(K_MC_tCrD_DEFAULT) | \
+                                V_MC_tRCD(K_MC_tRCD_DEFAULT) | \
+                                M_MC_r2rIDLE_TWOCYCLES
+
+/*
+ * Errata says these are not the default
+ *                               M_MC_w2rIDLE_TWOCYCLES | \
+ *                               M_MC_r2wIDLE_TWOCYCLES | \
+ */
+
+
+/*
+ * Chip Select Start Address Register (Table 6-17)
+ */
+
+#define S_MC_CS0_START              0
+#define M_MC_CS0_START              _SB_MAKEMASK(16, S_MC_CS0_START)
+#define V_MC_CS0_START(x)           _SB_MAKEVALUE(x, S_MC_CS0_START)
+#define G_MC_CS0_START(x)           _SB_GETVALUE(x, S_MC_CS0_START, M_MC_CS0_START)
+
+#define S_MC_CS1_START              16
+#define M_MC_CS1_START              _SB_MAKEMASK(16, S_MC_CS1_START)
+#define V_MC_CS1_START(x)           _SB_MAKEVALUE(x, S_MC_CS1_START)
+#define G_MC_CS1_START(x)           _SB_GETVALUE(x, S_MC_CS1_START, M_MC_CS1_START)
+
+#define S_MC_CS2_START              32
+#define M_MC_CS2_START              _SB_MAKEMASK(16, S_MC_CS2_START)
+#define V_MC_CS2_START(x)           _SB_MAKEVALUE(x, S_MC_CS2_START)
+#define G_MC_CS2_START(x)           _SB_GETVALUE(x, S_MC_CS2_START, M_MC_CS2_START)
+
+#define S_MC_CS3_START              48
+#define M_MC_CS3_START              _SB_MAKEMASK(16, S_MC_CS3_START)
+#define V_MC_CS3_START(x)           _SB_MAKEVALUE(x, S_MC_CS3_START)
+#define G_MC_CS3_START(x)           _SB_GETVALUE(x, S_MC_CS3_START, M_MC_CS3_START)
+
+/*
+ * Chip Select End Address Register (Table 6-18)
+ */
+
+#define S_MC_CS0_END                0
+#define M_MC_CS0_END                _SB_MAKEMASK(16, S_MC_CS0_END)
+#define V_MC_CS0_END(x)             _SB_MAKEVALUE(x, S_MC_CS0_END)
+#define G_MC_CS0_END(x)             _SB_GETVALUE(x, S_MC_CS0_END, M_MC_CS0_END)
+
+#define S_MC_CS1_END                16
+#define M_MC_CS1_END                _SB_MAKEMASK(16, S_MC_CS1_END)
+#define V_MC_CS1_END(x)             _SB_MAKEVALUE(x, S_MC_CS1_END)
+#define G_MC_CS1_END(x)             _SB_GETVALUE(x, S_MC_CS1_END, M_MC_CS1_END)
+
+#define S_MC_CS2_END                32
+#define M_MC_CS2_END                _SB_MAKEMASK(16, S_MC_CS2_END)
+#define V_MC_CS2_END(x)             _SB_MAKEVALUE(x, S_MC_CS2_END)
+#define G_MC_CS2_END(x)             _SB_GETVALUE(x, S_MC_CS2_END, M_MC_CS2_END)
+
+#define S_MC_CS3_END                48
+#define M_MC_CS3_END                _SB_MAKEMASK(16, S_MC_CS3_END)
+#define V_MC_CS3_END(x)             _SB_MAKEVALUE(x, S_MC_CS3_END)
+#define G_MC_CS3_END(x)             _SB_GETVALUE(x, S_MC_CS3_END, M_MC_CS3_END)
+
+/*
+ * Chip Select Interleave Register (Table 6-19)
+ */
+
+#define S_MC_INTLV_RESERVED         0
+#define M_MC_INTLV_RESERVED         _SB_MAKEMASK(5, S_MC_INTLV_RESERVED)
+
+#define S_MC_INTERLEAVE             7
+#define M_MC_INTERLEAVE             _SB_MAKEMASK(18, S_MC_INTERLEAVE)
+#define V_MC_INTERLEAVE(x)          _SB_MAKEVALUE(x, S_MC_INTERLEAVE)
+
+#define S_MC_INTLV_MBZ              25
+#define M_MC_INTLV_MBZ              _SB_MAKEMASK(39, S_MC_INTLV_MBZ)
+
+/*
+ * Row Address Bits Register (Table 6-20)
+ */
+
+#define S_MC_RAS_RESERVED           0
+#define M_MC_RAS_RESERVED           _SB_MAKEMASK(5, S_MC_RAS_RESERVED)
+
+#define S_MC_RAS_SELECT             12
+#define M_MC_RAS_SELECT             _SB_MAKEMASK(25, S_MC_RAS_SELECT)
+#define V_MC_RAS_SELECT(x)          _SB_MAKEVALUE(x, S_MC_RAS_SELECT)
+
+#define S_MC_RAS_MBZ                37
+#define M_MC_RAS_MBZ                _SB_MAKEMASK(27, S_MC_RAS_MBZ)
+
+
+/*
+ * Column Address Bits Register (Table 6-21)
+ */
+
+#define S_MC_CAS_RESERVED           0
+#define M_MC_CAS_RESERVED           _SB_MAKEMASK(5, S_MC_CAS_RESERVED)
+
+#define S_MC_CAS_SELECT             5
+#define M_MC_CAS_SELECT             _SB_MAKEMASK(18, S_MC_CAS_SELECT)
+#define V_MC_CAS_SELECT(x)          _SB_MAKEVALUE(x, S_MC_CAS_SELECT)
+
+#define S_MC_CAS_MBZ                23
+#define M_MC_CAS_MBZ                _SB_MAKEMASK(41, S_MC_CAS_MBZ)
+
+
+/*
+ * Bank Address Address Bits Register (Table 6-22)
+ */
+
+#define S_MC_BA_RESERVED            0
+#define M_MC_BA_RESERVED            _SB_MAKEMASK(5, S_MC_BA_RESERVED)
+
+#define S_MC_BA_SELECT              5
+#define M_MC_BA_SELECT              _SB_MAKEMASK(20, S_MC_BA_SELECT)
+#define V_MC_BA_SELECT(x)           _SB_MAKEVALUE(x, S_MC_BA_SELECT)
+
+#define S_MC_BA_MBZ                 25
+#define M_MC_BA_MBZ                 _SB_MAKEMASK(39, S_MC_BA_MBZ)
+
+/*
+ * Chip Select Attribute Register (Table 6-23)
+ */
+
+#define K_MC_CS_ATTR_CLOSED         0
+#define K_MC_CS_ATTR_CASCHECK       1
+#define K_MC_CS_ATTR_HINT           2
+#define K_MC_CS_ATTR_OPEN           3
+
+#define S_MC_CS0_PAGE               0
+#define M_MC_CS0_PAGE               _SB_MAKEMASK(2, S_MC_CS0_PAGE)
+#define V_MC_CS0_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS0_PAGE)
+#define G_MC_CS0_PAGE(x)            _SB_GETVALUE(x, S_MC_CS0_PAGE, M_MC_CS0_PAGE)
+
+#define S_MC_CS1_PAGE               16
+#define M_MC_CS1_PAGE               _SB_MAKEMASK(2, S_MC_CS1_PAGE)
+#define V_MC_CS1_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS1_PAGE)
+#define G_MC_CS1_PAGE(x)            _SB_GETVALUE(x, S_MC_CS1_PAGE, M_MC_CS1_PAGE)
+
+#define S_MC_CS2_PAGE               32
+#define M_MC_CS2_PAGE               _SB_MAKEMASK(2, S_MC_CS2_PAGE)
+#define V_MC_CS2_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS2_PAGE)
+#define G_MC_CS2_PAGE(x)            _SB_GETVALUE(x, S_MC_CS2_PAGE, M_MC_CS2_PAGE)
+
+#define S_MC_CS3_PAGE               48
+#define M_MC_CS3_PAGE               _SB_MAKEMASK(2, S_MC_CS3_PAGE)
+#define V_MC_CS3_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS3_PAGE)
+#define G_MC_CS3_PAGE(x)            _SB_GETVALUE(x, S_MC_CS3_PAGE, M_MC_CS3_PAGE)
+
+/*
+ * ECC Test ECC Register (Table 6-25)
+ */
+
+#define S_MC_ECC_INVERT             0
+#define M_MC_ECC_INVERT             _SB_MAKEMASK(8, S_MC_ECC_INVERT)
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_regs.h b/arch/mips/include/asm/sibyte/sb1250_regs.h
new file mode 100644
index 0000000..8f53ec8
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_regs.h
@@ -0,0 +1,893 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Register Definitions                     File: sb1250_regs.h
+    *
+    *  This module contains the addresses of the on-chip peripherals
+    *  on the SB1250.
+    *
+    *  SB1250 specification level:  01/02/2002
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_REGS_H
+#define _SB1250_REGS_H
+
+#include "sb1250_defs.h"
+
+
+/*  *********************************************************************
+    *  Some general notes:
+    *
+    *  For the most part, when there is more than one peripheral
+    *  of the same type on the SOC, the constants below will be
+    *  offsets from the base of each peripheral.  For example,
+    *  the MAC registers are described as offsets from the first
+    *  MAC register, and there will be a MAC_REGISTER() macro
+    *  to calculate the base address of a given MAC.
+    *
+    *  The information in this file is based on the SB1250 SOC
+    *  manual version 0.2, July 2000.
+    ********************************************************************* */
+
+
+/*  *********************************************************************
+    * Memory Controller Registers
+    ********************************************************************* */
+
+/*
+ * XXX: can't remove MC base 0 if 112x, since it's used by other macros,
+ * since there is one reg there (but it could get its addr/offset constant).
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x		/* This MC only on 1250 & 112x */
+#define A_MC_BASE_0                 0x0010051000
+#define A_MC_BASE_1                 0x0010052000
+#define MC_REGISTER_SPACING         0x1000
+
+#define A_MC_BASE(ctlid)            ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0)
+#define A_MC_REGISTER(ctlid, reg)    (A_MC_BASE(ctlid)+(reg))
+
+#define R_MC_CONFIG                 0x0000000100
+#define R_MC_DRAMCMD                0x0000000120
+#define R_MC_DRAMMODE               0x0000000140
+#define R_MC_TIMING1                0x0000000160
+#define R_MC_TIMING2                0x0000000180
+#define R_MC_CS_START               0x00000001A0
+#define R_MC_CS_END                 0x00000001C0
+#define R_MC_CS_INTERLEAVE          0x00000001E0
+#define S_MC_CS_STARTEND            16
+
+#define R_MC_CSX_BASE               0x0000000200
+#define R_MC_CSX_ROW                0x0000000000	/* relative to CSX_BASE, above */
+#define R_MC_CSX_COL                0x0000000020	/* relative to CSX_BASE, above */
+#define R_MC_CSX_BA                 0x0000000040	/* relative to CSX_BASE, above */
+#define MC_CSX_SPACING              0x0000000060	/* relative to CSX_BASE, above */
+
+#define R_MC_CS0_ROW                0x0000000200
+#define R_MC_CS0_COL                0x0000000220
+#define R_MC_CS0_BA                 0x0000000240
+#define R_MC_CS1_ROW                0x0000000260
+#define R_MC_CS1_COL                0x0000000280
+#define R_MC_CS1_BA                 0x00000002A0
+#define R_MC_CS2_ROW                0x00000002C0
+#define R_MC_CS2_COL                0x00000002E0
+#define R_MC_CS2_BA                 0x0000000300
+#define R_MC_CS3_ROW                0x0000000320
+#define R_MC_CS3_COL                0x0000000340
+#define R_MC_CS3_BA                 0x0000000360
+#define R_MC_CS_ATTR                0x0000000380
+#define R_MC_TEST_DATA              0x0000000400
+#define R_MC_TEST_ECC               0x0000000420
+#define R_MC_MCLK_CFG               0x0000000500
+
+#endif	/* 1250 & 112x */
+
+/*  *********************************************************************
+    * L2 Cache Control Registers
+    ********************************************************************* */
+
+#if SIBYTE_HDR_FEATURE_1250_112x	/* This L2C only on 1250/112x */
+
+#define A_L2_READ_TAG               0x0010040018
+#define A_L2_ECC_TAG                0x0010040038
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_L2_READ_MISC              0x0010040058
+#endif /* 1250 PASS3 || 112x PASS1 */
+#define A_L2_WAY_DISABLE            0x0010041000
+#define A_L2_MAKEDISABLE(x)         (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8))
+#define A_L2_MGMT_TAG_BASE          0x00D0000000
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_L2_CACHE_DISABLE	   0x0010042000
+#define A_L2_MAKECACHEDISABLE(x)   (A_L2_CACHE_DISABLE | (((x)&0x0F) << 8))
+#define A_L2_MISC_CONFIG	   0x0010043000
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/* Backward-compatibility definitions.  */
+/* XXX: discourage people from using these constants.  */
+#define A_L2_READ_ADDRESS           A_L2_READ_TAG
+#define A_L2_EEC_ADDRESS            A_L2_ECC_TAG
+
+#endif
+
+
+/*  *********************************************************************
+    * PCI Interface Registers
+    ********************************************************************* */
+
+#if SIBYTE_HDR_FEATURE_1250_112x	/* This PCI/HT only on 1250/112x */
+#define A_PCI_TYPE00_HEADER         0x00DE000000
+#define A_PCI_TYPE01_HEADER         0x00DE000800
+#endif
+
+
+/*  *********************************************************************
+    * Ethernet DMA and MACs
+    ********************************************************************* */
+
+#define A_MAC_BASE_0                0x0010064000
+#define A_MAC_BASE_1                0x0010065000
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
+#define A_MAC_BASE_2                0x0010066000
+#endif /* 1250 */
+
+#define MAC_SPACING                 0x1000
+#define MAC_DMA_TXRX_SPACING        0x0400
+#define MAC_DMA_CHANNEL_SPACING     0x0100
+#define DMA_RX                      0
+#define DMA_TX                      1
+#define MAC_NUM_DMACHAN		    2		    /* channels per direction */
+
+/* XXX: not correct; depends on SOC type.  */
+#define MAC_NUM_PORTS               3
+
+#define A_MAC_CHANNEL_BASE(macnum)                  \
+            (A_MAC_BASE_0 +                         \
+             MAC_SPACING*(macnum))
+
+#define A_MAC_REGISTER(macnum,reg)                  \
+            (A_MAC_BASE_0 +                         \
+             MAC_SPACING*(macnum) + (reg))
+
+
+#define R_MAC_DMA_CHANNELS		0x800 /* Relative to A_MAC_CHANNEL_BASE */
+
+#define A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan)  \
+             ((A_MAC_CHANNEL_BASE(macnum)) +        \
+             R_MAC_DMA_CHANNELS +                   \
+             (MAC_DMA_TXRX_SPACING*(txrx)) +        \
+             (MAC_DMA_CHANNEL_SPACING*(chan)))
+
+#define R_MAC_DMA_CHANNEL_BASE(txrx, chan)		\
+             (R_MAC_DMA_CHANNELS +                   \
+             (MAC_DMA_TXRX_SPACING*(txrx)) +        \
+             (MAC_DMA_CHANNEL_SPACING*(chan)))
+
+#define A_MAC_DMA_REGISTER(macnum, txrx, chan, reg)           \
+            (A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) +    \
+            (reg))
+
+#define R_MAC_DMA_REGISTER(txrx, chan, reg)           \
+            (R_MAC_DMA_CHANNEL_BASE(txrx, chan) +    \
+            (reg))
+
+/*
+ * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE
+ */
+
+#define R_MAC_DMA_CONFIG0               0x00000000
+#define R_MAC_DMA_CONFIG1               0x00000008
+#define R_MAC_DMA_DSCR_BASE             0x00000010
+#define R_MAC_DMA_DSCR_CNT              0x00000018
+#define R_MAC_DMA_CUR_DSCRA             0x00000020
+#define R_MAC_DMA_CUR_DSCRB             0x00000028
+#define R_MAC_DMA_CUR_DSCRADDR          0x00000030
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_MAC_DMA_OODPKTLOST_RX         0x00000038	/* rx only */
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * RMON Counters
+ */
+
+#define R_MAC_RMON_TX_BYTES             0x00000000
+#define R_MAC_RMON_COLLISIONS           0x00000008
+#define R_MAC_RMON_LATE_COL             0x00000010
+#define R_MAC_RMON_EX_COL               0x00000018
+#define R_MAC_RMON_FCS_ERROR            0x00000020
+#define R_MAC_RMON_TX_ABORT             0x00000028
+/* Counter #6 (0x30) now reserved */
+#define R_MAC_RMON_TX_BAD               0x00000038
+#define R_MAC_RMON_TX_GOOD              0x00000040
+#define R_MAC_RMON_TX_RUNT              0x00000048
+#define R_MAC_RMON_TX_OVERSIZE          0x00000050
+#define R_MAC_RMON_RX_BYTES             0x00000080
+#define R_MAC_RMON_RX_MCAST             0x00000088
+#define R_MAC_RMON_RX_BCAST             0x00000090
+#define R_MAC_RMON_RX_BAD               0x00000098
+#define R_MAC_RMON_RX_GOOD              0x000000A0
+#define R_MAC_RMON_RX_RUNT              0x000000A8
+#define R_MAC_RMON_RX_OVERSIZE          0x000000B0
+#define R_MAC_RMON_RX_FCS_ERROR         0x000000B8
+#define R_MAC_RMON_RX_LENGTH_ERROR      0x000000C0
+#define R_MAC_RMON_RX_CODE_ERROR        0x000000C8
+#define R_MAC_RMON_RX_ALIGN_ERROR       0x000000D0
+
+/* Updated to spec 0.2 */
+#define R_MAC_CFG                       0x00000100
+#define R_MAC_THRSH_CFG                 0x00000108
+#define R_MAC_VLANTAG                   0x00000110
+#define R_MAC_FRAMECFG                  0x00000118
+#define R_MAC_EOPCNT                    0x00000120
+#define R_MAC_FIFO_PTRS                 0x00000128
+#define R_MAC_ADFILTER_CFG              0x00000200
+#define R_MAC_ETHERNET_ADDR             0x00000208
+#define R_MAC_PKT_TYPE                  0x00000210
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define R_MAC_ADMASK0			0x00000218
+#define R_MAC_ADMASK1			0x00000220
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+#define R_MAC_HASH_BASE                 0x00000240
+#define R_MAC_ADDR_BASE                 0x00000280
+#define R_MAC_CHLO0_BASE                0x00000300
+#define R_MAC_CHUP0_BASE                0x00000320
+#define R_MAC_ENABLE                    0x00000400
+#define R_MAC_STATUS                    0x00000408
+#define R_MAC_INT_MASK                  0x00000410
+#define R_MAC_TXD_CTL                   0x00000420
+#define R_MAC_MDIO                      0x00000428
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define R_MAC_STATUS1		        0x00000430
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define R_MAC_DEBUG_STATUS              0x00000448
+
+#define MAC_HASH_COUNT			8
+#define MAC_ADDR_COUNT			8
+#define MAC_CHMAP_COUNT			4
+
+
+/*  *********************************************************************
+    * DUART Registers
+    ********************************************************************* */
+
+
+#if SIBYTE_HDR_FEATURE_1250_112x    /* This MC only on 1250 & 112x */
+#define R_DUART_NUM_PORTS           2
+
+#define A_DUART                     0x0010060000
+
+#define DUART_CHANREG_SPACING       0x100
+
+#define A_DUART_CHANREG(chan, reg)					\
+	(A_DUART + DUART_CHANREG_SPACING * ((chan) + 1) + (reg))
+#endif	/* 1250 & 112x */
+
+#define R_DUART_MODE_REG_1	    0x000
+#define R_DUART_MODE_REG_2	    0x010
+#define R_DUART_STATUS		    0x020
+#define R_DUART_CLK_SEL		    0x030
+#define R_DUART_CMD		    0x050
+#define R_DUART_RX_HOLD		    0x060
+#define R_DUART_TX_HOLD		    0x070
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define R_DUART_FULL_CTL	    0x040
+#define R_DUART_OPCR_X		    0x080
+#define R_DUART_AUXCTL_X	    0x090
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/*
+ * The IMR and ISR can't be addressed with A_DUART_CHANREG,
+ * so use these macros instead.
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x    /* This MC only on 1250 & 112x */
+#define DUART_IMRISR_SPACING	    0x20
+#define DUART_INCHNG_SPACING	    0x10
+
+#define A_DUART_CTRLREG(reg)						\
+	(A_DUART + DUART_CHANREG_SPACING * 3 + (reg))
+
+#define R_DUART_IMRREG(chan)						\
+	(R_DUART_IMR_A + (chan) * DUART_IMRISR_SPACING)
+#define R_DUART_ISRREG(chan)						\
+	(R_DUART_ISR_A + (chan) * DUART_IMRISR_SPACING)
+#define R_DUART_INCHREG(chan)						\
+	(R_DUART_IN_CHNG_A + (chan) * DUART_INCHNG_SPACING)
+
+#define A_DUART_IMRREG(chan)	    A_DUART_CTRLREG(R_DUART_IMRREG(chan))
+#define A_DUART_ISRREG(chan)	    A_DUART_CTRLREG(R_DUART_ISRREG(chan))
+#define A_DUART_INCHREG(chan)	    A_DUART_CTRLREG(R_DUART_INCHREG(chan))
+#endif	/* 1250 & 112x */
+
+#define R_DUART_AUX_CTRL	    0x010
+#define R_DUART_ISR_A		    0x020
+#define R_DUART_IMR_A		    0x030
+#define R_DUART_ISR_B		    0x040
+#define R_DUART_IMR_B		    0x050
+#define R_DUART_OUT_PORT	    0x060
+#define R_DUART_OPCR		    0x070
+#define R_DUART_IN_PORT		    0x080
+
+#define R_DUART_SET_OPR		    0x0B0
+#define R_DUART_CLEAR_OPR	    0x0C0
+#define R_DUART_IN_CHNG_A	    0x0D0
+#define R_DUART_IN_CHNG_B	    0x0E0
+
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_DUART_MODE_REG_1_A        0x0010060100
+#define A_DUART_MODE_REG_2_A        0x0010060110
+#define A_DUART_STATUS_A            0x0010060120
+#define A_DUART_CLK_SEL_A           0x0010060130
+#define A_DUART_CMD_A               0x0010060150
+#define A_DUART_RX_HOLD_A           0x0010060160
+#define A_DUART_TX_HOLD_A           0x0010060170
+
+#define A_DUART_MODE_REG_1_B        0x0010060200
+#define A_DUART_MODE_REG_2_B        0x0010060210
+#define A_DUART_STATUS_B            0x0010060220
+#define A_DUART_CLK_SEL_B           0x0010060230
+#define A_DUART_CMD_B               0x0010060250
+#define A_DUART_RX_HOLD_B           0x0010060260
+#define A_DUART_TX_HOLD_B           0x0010060270
+
+#define A_DUART_INPORT_CHNG         0x0010060300
+#define A_DUART_AUX_CTRL            0x0010060310
+#define A_DUART_ISR_A               0x0010060320
+#define A_DUART_IMR_A               0x0010060330
+#define A_DUART_ISR_B               0x0010060340
+#define A_DUART_IMR_B               0x0010060350
+#define A_DUART_OUT_PORT            0x0010060360
+#define A_DUART_OPCR                0x0010060370
+#define A_DUART_IN_PORT             0x0010060380
+#define A_DUART_ISR                 0x0010060390
+#define A_DUART_IMR                 0x00100603A0
+#define A_DUART_SET_OPR             0x00100603B0
+#define A_DUART_CLEAR_OPR           0x00100603C0
+#define A_DUART_INPORT_CHNG_A       0x00100603D0
+#define A_DUART_INPORT_CHNG_B       0x00100603E0
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DUART_FULL_CTL_A	    0x0010060140
+#define A_DUART_FULL_CTL_B	    0x0010060240
+
+#define A_DUART_OPCR_A	  	    0x0010060180
+#define A_DUART_OPCR_B	  	    0x0010060280
+
+#define A_DUART_INPORT_CHNG_DEBUG   0x00100603F0
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+/*  *********************************************************************
+    * Synchronous Serial Registers
+    ********************************************************************* */
+
+
+#if SIBYTE_HDR_FEATURE_1250_112x	/* sync serial only on 1250/112x */
+
+#define A_SER_BASE_0                0x0010060400
+#define A_SER_BASE_1                0x0010060800
+#define SER_SPACING                 0x400
+
+#define SER_DMA_TXRX_SPACING        0x80
+
+#define SER_NUM_PORTS               2
+
+#define A_SER_CHANNEL_BASE(sernum)                  \
+            (A_SER_BASE_0 +                         \
+             SER_SPACING*(sernum))
+
+#define A_SER_REGISTER(sernum,reg)                  \
+            (A_SER_BASE_0 +                         \
+             SER_SPACING*(sernum) + (reg))
+
+
+#define R_SER_DMA_CHANNELS		0   /* Relative to A_SER_BASE_x */
+
+#define A_SER_DMA_CHANNEL_BASE(sernum,txrx)    \
+             ((A_SER_CHANNEL_BASE(sernum)) +        \
+             R_SER_DMA_CHANNELS +                   \
+             (SER_DMA_TXRX_SPACING*(txrx)))
+
+#define A_SER_DMA_REGISTER(sernum, txrx, reg)           \
+            (A_SER_DMA_CHANNEL_BASE(sernum, txrx) +    \
+            (reg))
+
+
+/*
+ * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE
+ */
+
+#define R_SER_DMA_CONFIG0           0x00000000
+#define R_SER_DMA_CONFIG1           0x00000008
+#define R_SER_DMA_DSCR_BASE         0x00000010
+#define R_SER_DMA_DSCR_CNT          0x00000018
+#define R_SER_DMA_CUR_DSCRA         0x00000020
+#define R_SER_DMA_CUR_DSCRB         0x00000028
+#define R_SER_DMA_CUR_DSCRADDR      0x00000030
+
+#define R_SER_DMA_CONFIG0_RX        0x00000000
+#define R_SER_DMA_CONFIG1_RX        0x00000008
+#define R_SER_DMA_DSCR_BASE_RX      0x00000010
+#define R_SER_DMA_DSCR_COUNT_RX     0x00000018
+#define R_SER_DMA_CUR_DSCR_A_RX     0x00000020
+#define R_SER_DMA_CUR_DSCR_B_RX     0x00000028
+#define R_SER_DMA_CUR_DSCR_ADDR_RX  0x00000030
+
+#define R_SER_DMA_CONFIG0_TX        0x00000080
+#define R_SER_DMA_CONFIG1_TX        0x00000088
+#define R_SER_DMA_DSCR_BASE_TX      0x00000090
+#define R_SER_DMA_DSCR_COUNT_TX     0x00000098
+#define R_SER_DMA_CUR_DSCR_A_TX     0x000000A0
+#define R_SER_DMA_CUR_DSCR_B_TX     0x000000A8
+#define R_SER_DMA_CUR_DSCR_ADDR_TX  0x000000B0
+
+#define R_SER_MODE                  0x00000100
+#define R_SER_MINFRM_SZ             0x00000108
+#define R_SER_MAXFRM_SZ             0x00000110
+#define R_SER_ADDR                  0x00000118
+#define R_SER_USR0_ADDR             0x00000120
+#define R_SER_USR1_ADDR             0x00000128
+#define R_SER_USR2_ADDR             0x00000130
+#define R_SER_USR3_ADDR             0x00000138
+#define R_SER_CMD                   0x00000140
+#define R_SER_TX_RD_THRSH           0x00000160
+#define R_SER_TX_WR_THRSH           0x00000168
+#define R_SER_RX_RD_THRSH           0x00000170
+#define R_SER_LINE_MODE		    0x00000178
+#define R_SER_DMA_ENABLE            0x00000180
+#define R_SER_INT_MASK              0x00000190
+#define R_SER_STATUS                0x00000188
+#define R_SER_STATUS_DEBUG          0x000001A8
+#define R_SER_RX_TABLE_BASE         0x00000200
+#define SER_RX_TABLE_COUNT          16
+#define R_SER_TX_TABLE_BASE         0x00000300
+#define SER_TX_TABLE_COUNT          16
+
+/* RMON Counters */
+#define R_SER_RMON_TX_BYTE_LO       0x000001C0
+#define R_SER_RMON_TX_BYTE_HI       0x000001C8
+#define R_SER_RMON_RX_BYTE_LO       0x000001D0
+#define R_SER_RMON_RX_BYTE_HI       0x000001D8
+#define R_SER_RMON_TX_UNDERRUN      0x000001E0
+#define R_SER_RMON_RX_OVERFLOW      0x000001E8
+#define R_SER_RMON_RX_ERRORS        0x000001F0
+#define R_SER_RMON_RX_BADADDR       0x000001F8
+
+#endif	/* 1250/112x */
+
+/*  *********************************************************************
+    * Generic Bus Registers
+    ********************************************************************* */
+
+#define IO_EXT_CFG_COUNT            8
+
+#define A_IO_EXT_BASE		    0x0010061000
+#define A_IO_EXT_REG(r)		    (A_IO_EXT_BASE + (r))
+
+#define A_IO_EXT_CFG_BASE           0x0010061000
+#define A_IO_EXT_MULT_SIZE_BASE     0x0010061100
+#define A_IO_EXT_START_ADDR_BASE    0x0010061200
+#define A_IO_EXT_TIME_CFG0_BASE     0x0010061600
+#define A_IO_EXT_TIME_CFG1_BASE     0x0010061700
+
+#define IO_EXT_REGISTER_SPACING	    8
+#define A_IO_EXT_CS_BASE(cs)	    (A_IO_EXT_CFG_BASE+IO_EXT_REGISTER_SPACING*(cs))
+#define R_IO_EXT_REG(reg, cs)	    ((cs)*IO_EXT_REGISTER_SPACING + (reg))
+
+#define R_IO_EXT_CFG		    0x0000
+#define R_IO_EXT_MULT_SIZE          0x0100
+#define R_IO_EXT_START_ADDR	    0x0200
+#define R_IO_EXT_TIME_CFG0          0x0600
+#define R_IO_EXT_TIME_CFG1          0x0700
+
+
+#define A_IO_INTERRUPT_STATUS       0x0010061A00
+#define A_IO_INTERRUPT_DATA0        0x0010061A10
+#define A_IO_INTERRUPT_DATA1        0x0010061A18
+#define A_IO_INTERRUPT_DATA2        0x0010061A20
+#define A_IO_INTERRUPT_DATA3        0x0010061A28
+#define A_IO_INTERRUPT_ADDR0        0x0010061A30
+#define A_IO_INTERRUPT_ADDR1        0x0010061A40
+#define A_IO_INTERRUPT_PARITY       0x0010061A50
+#define A_IO_PCMCIA_CFG             0x0010061A60
+#define A_IO_PCMCIA_STATUS          0x0010061A70
+#define A_IO_DRIVE_0		    0x0010061300
+#define A_IO_DRIVE_1		    0x0010061308
+#define A_IO_DRIVE_2		    0x0010061310
+#define A_IO_DRIVE_3		    0x0010061318
+#define A_IO_DRIVE_BASE		    A_IO_DRIVE_0
+#define IO_DRIVE_REGISTER_SPACING   8
+#define R_IO_DRIVE(x)		    ((x)*IO_DRIVE_REGISTER_SPACING)
+#define A_IO_DRIVE(x)		    (A_IO_DRIVE_BASE + R_IO_DRIVE(x))
+
+#define R_IO_INTERRUPT_STATUS       0x0A00
+#define R_IO_INTERRUPT_DATA0        0x0A10
+#define R_IO_INTERRUPT_DATA1        0x0A18
+#define R_IO_INTERRUPT_DATA2        0x0A20
+#define R_IO_INTERRUPT_DATA3        0x0A28
+#define R_IO_INTERRUPT_ADDR0        0x0A30
+#define R_IO_INTERRUPT_ADDR1        0x0A40
+#define R_IO_INTERRUPT_PARITY       0x0A50
+#define R_IO_PCMCIA_CFG             0x0A60
+#define R_IO_PCMCIA_STATUS          0x0A70
+
+/*  *********************************************************************
+    * GPIO Registers
+    ********************************************************************* */
+
+#define A_GPIO_CLR_EDGE             0x0010061A80
+#define A_GPIO_INT_TYPE             0x0010061A88
+#define A_GPIO_INPUT_INVERT         0x0010061A90
+#define A_GPIO_GLITCH               0x0010061A98
+#define A_GPIO_READ                 0x0010061AA0
+#define A_GPIO_DIRECTION            0x0010061AA8
+#define A_GPIO_PIN_CLR              0x0010061AB0
+#define A_GPIO_PIN_SET              0x0010061AB8
+
+#define A_GPIO_BASE		    0x0010061A80
+
+#define R_GPIO_CLR_EDGE             0x00
+#define R_GPIO_INT_TYPE             0x08
+#define R_GPIO_INPUT_INVERT         0x10
+#define R_GPIO_GLITCH               0x18
+#define R_GPIO_READ                 0x20
+#define R_GPIO_DIRECTION            0x28
+#define R_GPIO_PIN_CLR              0x30
+#define R_GPIO_PIN_SET              0x38
+
+/*  *********************************************************************
+    * SMBus Registers
+    ********************************************************************* */
+
+#define A_SMB_XTRA_0                0x0010060000
+#define A_SMB_XTRA_1                0x0010060008
+#define A_SMB_FREQ_0                0x0010060010
+#define A_SMB_FREQ_1                0x0010060018
+#define A_SMB_STATUS_0              0x0010060020
+#define A_SMB_STATUS_1              0x0010060028
+#define A_SMB_CMD_0                 0x0010060030
+#define A_SMB_CMD_1                 0x0010060038
+#define A_SMB_START_0               0x0010060040
+#define A_SMB_START_1               0x0010060048
+#define A_SMB_DATA_0                0x0010060050
+#define A_SMB_DATA_1                0x0010060058
+#define A_SMB_CONTROL_0             0x0010060060
+#define A_SMB_CONTROL_1             0x0010060068
+#define A_SMB_PEC_0                 0x0010060070
+#define A_SMB_PEC_1                 0x0010060078
+
+#define A_SMB_0                     0x0010060000
+#define A_SMB_1                     0x0010060008
+#define SMB_REGISTER_SPACING        0x8
+#define A_SMB_BASE(idx)             (A_SMB_0+(idx)*SMB_REGISTER_SPACING)
+#define A_SMB_REGISTER(idx, reg)    (A_SMB_BASE(idx)+(reg))
+
+#define R_SMB_XTRA                  0x0000000000
+#define R_SMB_FREQ                  0x0000000010
+#define R_SMB_STATUS                0x0000000020
+#define R_SMB_CMD                   0x0000000030
+#define R_SMB_START                 0x0000000040
+#define R_SMB_DATA                  0x0000000050
+#define R_SMB_CONTROL               0x0000000060
+#define R_SMB_PEC                   0x0000000070
+
+/*  *********************************************************************
+    * Timer Registers
+    ********************************************************************* */
+
+/*
+ * Watchdog timers
+ */
+
+#define A_SCD_WDOG_0		    0x0010020050
+#define A_SCD_WDOG_1                0x0010020150
+#define SCD_WDOG_SPACING            0x100
+#define SCD_NUM_WDOGS		    2
+#define A_SCD_WDOG_BASE(w)          (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w))
+#define A_SCD_WDOG_REGISTER(w, r)   (A_SCD_WDOG_BASE(w) + (r))
+
+#define R_SCD_WDOG_INIT		    0x0000000000
+#define R_SCD_WDOG_CNT		    0x0000000008
+#define R_SCD_WDOG_CFG		    0x0000000010
+
+#define A_SCD_WDOG_INIT_0           0x0010020050
+#define A_SCD_WDOG_CNT_0            0x0010020058
+#define A_SCD_WDOG_CFG_0            0x0010020060
+
+#define A_SCD_WDOG_INIT_1           0x0010020150
+#define A_SCD_WDOG_CNT_1            0x0010020158
+#define A_SCD_WDOG_CFG_1            0x0010020160
+
+/*
+ * Generic timers
+ */
+
+#define A_SCD_TIMER_0		    0x0010020070
+#define A_SCD_TIMER_1               0x0010020078
+#define A_SCD_TIMER_2		    0x0010020170
+#define A_SCD_TIMER_3               0x0010020178
+#define SCD_NUM_TIMERS		    4
+#define A_SCD_TIMER_BASE(w)         (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1))
+#define A_SCD_TIMER_REGISTER(w, r)  (A_SCD_TIMER_BASE(w) + (r))
+
+#define R_SCD_TIMER_INIT	    0x0000000000
+#define R_SCD_TIMER_CNT		    0x0000000010
+#define R_SCD_TIMER_CFG		    0x0000000020
+
+#define A_SCD_TIMER_INIT_0          0x0010020070
+#define A_SCD_TIMER_CNT_0           0x0010020080
+#define A_SCD_TIMER_CFG_0           0x0010020090
+
+#define A_SCD_TIMER_INIT_1          0x0010020078
+#define A_SCD_TIMER_CNT_1           0x0010020088
+#define A_SCD_TIMER_CFG_1           0x0010020098
+
+#define A_SCD_TIMER_INIT_2          0x0010020170
+#define A_SCD_TIMER_CNT_2           0x0010020180
+#define A_SCD_TIMER_CFG_2           0x0010020190
+
+#define A_SCD_TIMER_INIT_3          0x0010020178
+#define A_SCD_TIMER_CNT_3           0x0010020188
+#define A_SCD_TIMER_CFG_3           0x0010020198
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_SCD_SCRATCH		   0x0010020C10
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define A_SCD_ZBBUS_CYCLE_COUNT	   0x0010030000
+#define A_SCD_ZBBUS_CYCLE_CP0	   0x0010020C00
+#define A_SCD_ZBBUS_CYCLE_CP1	   0x0010020C08
+#endif
+
+/*  *********************************************************************
+    * System Control Registers
+    ********************************************************************* */
+
+#define A_SCD_SYSTEM_REVISION       0x0010020000
+#define A_SCD_SYSTEM_CFG            0x0010020008
+#define A_SCD_SYSTEM_MANUF          0x0010038000
+
+/*  *********************************************************************
+    * System Address Trap Registers
+    ********************************************************************* */
+
+#define A_ADDR_TRAP_INDEX           0x00100200B0
+#define A_ADDR_TRAP_REG             0x00100200B8
+#define A_ADDR_TRAP_UP_0            0x0010020400
+#define A_ADDR_TRAP_UP_1            0x0010020408
+#define A_ADDR_TRAP_UP_2            0x0010020410
+#define A_ADDR_TRAP_UP_3            0x0010020418
+#define A_ADDR_TRAP_DOWN_0          0x0010020420
+#define A_ADDR_TRAP_DOWN_1          0x0010020428
+#define A_ADDR_TRAP_DOWN_2          0x0010020430
+#define A_ADDR_TRAP_DOWN_3          0x0010020438
+#define A_ADDR_TRAP_CFG_0           0x0010020440
+#define A_ADDR_TRAP_CFG_1           0x0010020448
+#define A_ADDR_TRAP_CFG_2           0x0010020450
+#define A_ADDR_TRAP_CFG_3           0x0010020458
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define A_ADDR_TRAP_REG_DEBUG	    0x0010020460
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define ADDR_TRAP_SPACING 8
+#define NUM_ADDR_TRAP 4
+#define A_ADDR_TRAP_UP(n) (A_ADDR_TRAP_UP_0 + ((n) * ADDR_TRAP_SPACING))
+#define A_ADDR_TRAP_DOWN(n) (A_ADDR_TRAP_DOWN_0 + ((n) * ADDR_TRAP_SPACING))
+#define A_ADDR_TRAP_CFG(n) (A_ADDR_TRAP_CFG_0 + ((n) * ADDR_TRAP_SPACING))
+
+
+/*  *********************************************************************
+    * System Interrupt Mapper Registers
+    ********************************************************************* */
+
+#define A_IMR_CPU0_BASE                 0x0010020000
+#define A_IMR_CPU1_BASE                 0x0010022000
+#define IMR_REGISTER_SPACING            0x2000
+#define IMR_REGISTER_SPACING_SHIFT      13
+
+#define A_IMR_MAPPER(cpu) (A_IMR_CPU0_BASE+(cpu)*IMR_REGISTER_SPACING)
+#define A_IMR_REGISTER(cpu, reg) (A_IMR_MAPPER(cpu)+(reg))
+
+#define R_IMR_INTERRUPT_DIAG            0x0010
+#define R_IMR_INTERRUPT_LDT             0x0018
+#define R_IMR_INTERRUPT_MASK            0x0028
+#define R_IMR_INTERRUPT_TRACE           0x0038
+#define R_IMR_INTERRUPT_SOURCE_STATUS   0x0040
+#define R_IMR_LDT_INTERRUPT_SET         0x0048
+#define R_IMR_LDT_INTERRUPT             0x0018
+#define R_IMR_LDT_INTERRUPT_CLR         0x0020
+#define R_IMR_MAILBOX_CPU               0x00c0
+#define R_IMR_ALIAS_MAILBOX_CPU         0x1000
+#define R_IMR_MAILBOX_SET_CPU           0x00C8
+#define R_IMR_ALIAS_MAILBOX_SET_CPU     0x1008
+#define R_IMR_MAILBOX_CLR_CPU           0x00D0
+#define R_IMR_INTERRUPT_STATUS_BASE     0x0100
+#define R_IMR_INTERRUPT_STATUS_COUNT    7
+#define R_IMR_INTERRUPT_MAP_BASE        0x0200
+#define R_IMR_INTERRUPT_MAP_COUNT       64
+
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_MAILBOX_REGISTER(R_IMR_MAILBOX_SET_CPU,1)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define A_MAILBOX_REGISTER(reg,cpu) \
+    (A_IMR_CPU0_BASE + (cpu * IMR_REGISTER_SPACING) + reg)
+
+/*  *********************************************************************
+    * System Performance Counter Registers
+    ********************************************************************* */
+
+#define A_SCD_PERF_CNT_CFG          0x00100204C0
+#define A_SCD_PERF_CNT_0            0x00100204D0
+#define A_SCD_PERF_CNT_1            0x00100204D8
+#define A_SCD_PERF_CNT_2            0x00100204E0
+#define A_SCD_PERF_CNT_3            0x00100204E8
+
+#define SCD_NUM_PERF_CNT 4
+#define SCD_PERF_CNT_SPACING 8
+#define A_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*SCD_PERF_CNT_SPACING))
+
+/*  *********************************************************************
+    * System Bus Watcher Registers
+    ********************************************************************* */
+
+#define A_SCD_BUS_ERR_STATUS        0x0010020880
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_SCD_BUS_ERR_STATUS_DEBUG  0x00100208D0
+#define A_BUS_ERR_STATUS_DEBUG  0x00100208D0
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define A_BUS_ERR_DATA_0            0x00100208A0
+#define A_BUS_ERR_DATA_1            0x00100208A8
+#define A_BUS_ERR_DATA_2            0x00100208B0
+#define A_BUS_ERR_DATA_3            0x00100208B8
+#define A_BUS_L2_ERRORS             0x00100208C0
+#define A_BUS_MEM_IO_ERRORS         0x00100208C8
+
+/*  *********************************************************************
+    * System Debug Controller Registers
+    ********************************************************************* */
+
+#define A_SCD_JTAG_BASE             0x0010000000
+
+/*  *********************************************************************
+    * System Trace Buffer Registers
+    ********************************************************************* */
+
+#define A_SCD_TRACE_CFG             0x0010020A00
+#define A_SCD_TRACE_READ            0x0010020A08
+#define A_SCD_TRACE_EVENT_0         0x0010020A20
+#define A_SCD_TRACE_EVENT_1         0x0010020A28
+#define A_SCD_TRACE_EVENT_2         0x0010020A30
+#define A_SCD_TRACE_EVENT_3         0x0010020A38
+#define A_SCD_TRACE_SEQUENCE_0      0x0010020A40
+#define A_SCD_TRACE_SEQUENCE_1      0x0010020A48
+#define A_SCD_TRACE_SEQUENCE_2      0x0010020A50
+#define A_SCD_TRACE_SEQUENCE_3      0x0010020A58
+#define A_SCD_TRACE_EVENT_4         0x0010020A60
+#define A_SCD_TRACE_EVENT_5         0x0010020A68
+#define A_SCD_TRACE_EVENT_6         0x0010020A70
+#define A_SCD_TRACE_EVENT_7         0x0010020A78
+#define A_SCD_TRACE_SEQUENCE_4      0x0010020A80
+#define A_SCD_TRACE_SEQUENCE_5      0x0010020A88
+#define A_SCD_TRACE_SEQUENCE_6      0x0010020A90
+#define A_SCD_TRACE_SEQUENCE_7      0x0010020A98
+
+#define TRACE_REGISTER_SPACING 8
+#define TRACE_NUM_REGISTERS    8
+#define A_SCD_TRACE_EVENT(n) (((n) & 4) ? \
+   (A_SCD_TRACE_EVENT_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
+   (A_SCD_TRACE_EVENT_0 + ((n) * TRACE_REGISTER_SPACING)))
+#define A_SCD_TRACE_SEQUENCE(n) (((n) & 4) ? \
+   (A_SCD_TRACE_SEQUENCE_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
+   (A_SCD_TRACE_SEQUENCE_0 + ((n) * TRACE_REGISTER_SPACING)))
+
+/*  *********************************************************************
+    * System Generic DMA Registers
+    ********************************************************************* */
+
+#define A_DM_0		  	    0x0010020B00
+#define A_DM_1		  	    0x0010020B20
+#define A_DM_2			    0x0010020B40
+#define A_DM_3			    0x0010020B60
+#define DM_REGISTER_SPACING	    0x20
+#define DM_NUM_CHANNELS		    4
+#define A_DM_BASE(idx) (A_DM_0 + ((idx) * DM_REGISTER_SPACING))
+#define A_DM_REGISTER(idx, reg) (A_DM_BASE(idx) + (reg))
+
+#define R_DM_DSCR_BASE		    0x0000000000
+#define R_DM_DSCR_COUNT		    0x0000000008
+#define R_DM_CUR_DSCR_ADDR	    0x0000000010
+#define R_DM_DSCR_BASE_DEBUG	    0x0000000018
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DM_PARTIAL_0		    0x0010020ba0
+#define A_DM_PARTIAL_1		    0x0010020ba8
+#define A_DM_PARTIAL_2		    0x0010020bb0
+#define A_DM_PARTIAL_3		    0x0010020bb8
+#define DM_PARTIAL_REGISTER_SPACING 0x8
+#define A_DM_PARTIAL(idx)	    (A_DM_PARTIAL_0 + ((idx) * DM_PARTIAL_REGISTER_SPACING))
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DM_CRC_0		    0x0010020b80
+#define A_DM_CRC_1		    0x0010020b90
+#define DM_CRC_REGISTER_SPACING	    0x10
+#define DM_CRC_NUM_CHANNELS	    2
+#define A_DM_CRC_BASE(idx)	    (A_DM_CRC_0 + ((idx) * DM_CRC_REGISTER_SPACING))
+#define A_DM_CRC_REGISTER(idx, reg)  (A_DM_CRC_BASE(idx) + (reg))
+
+#define R_CRC_DEF_0		    0x00
+#define R_CTCP_DEF_0		    0x08
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*  *********************************************************************
+    *  Physical Address Map
+    ********************************************************************* */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define A_PHYS_MEMORY_0                 _SB_MAKE64(0x0000000000)
+#define A_PHYS_MEMORY_SIZE              _SB_MAKE64((256*1024*1024))
+#define A_PHYS_SYSTEM_CTL               _SB_MAKE64(0x0010000000)
+#define A_PHYS_IO_SYSTEM                _SB_MAKE64(0x0010060000)
+#define A_PHYS_GENBUS			_SB_MAKE64(0x0010090000)
+#define A_PHYS_GENBUS_END		_SB_MAKE64(0x0040000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES_32 _SB_MAKE64(0x0040000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS_32  _SB_MAKE64(0x0060000000)
+#define A_PHYS_MEMORY_1                 _SB_MAKE64(0x0080000000)
+#define A_PHYS_MEMORY_2                 _SB_MAKE64(0x0090000000)
+#define A_PHYS_MEMORY_3                 _SB_MAKE64(0x00C0000000)
+#define A_PHYS_L2_CACHE_TEST            _SB_MAKE64(0x00D0000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BYTES  _SB_MAKE64(0x00D8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES    _SB_MAKE64(0x00DC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BYTES   _SB_MAKE64(0x00DE000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BITS   _SB_MAKE64(0x00F8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS     _SB_MAKE64(0x00FC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BITS    _SB_MAKE64(0x00FE000000)
+#define A_PHYS_MEMORY_EXP               _SB_MAKE64(0x0100000000)
+#define A_PHYS_MEMORY_EXP_SIZE          _SB_MAKE64((508*1024*1024*1024))
+#define A_PHYS_LDT_EXP                  _SB_MAKE64(0x8000000000)
+#define A_PHYS_PCI_FULLACCESS_BYTES     _SB_MAKE64(0xF000000000)
+#define A_PHYS_PCI_FULLACCESS_BITS      _SB_MAKE64(0xF100000000)
+#define A_PHYS_RESERVED                 _SB_MAKE64(0xF200000000)
+#define A_PHYS_RESERVED_SPECIAL_LDT     _SB_MAKE64(0xFD00000000)
+
+#define A_PHYS_L2CACHE_WAY_SIZE         _SB_MAKE64(0x0000020000)
+#define PHYS_L2CACHE_NUM_WAYS           4
+#define A_PHYS_L2CACHE_TOTAL_SIZE       _SB_MAKE64(0x0000080000)
+#define A_PHYS_L2CACHE_WAY0             _SB_MAKE64(0x00D0180000)
+#define A_PHYS_L2CACHE_WAY1             _SB_MAKE64(0x00D01A0000)
+#define A_PHYS_L2CACHE_WAY2             _SB_MAKE64(0x00D01C0000)
+#define A_PHYS_L2CACHE_WAY3             _SB_MAKE64(0x00D01E0000)
+#endif
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_scd.h b/arch/mips/include/asm/sibyte/sb1250_scd.h
new file mode 100644
index 0000000..e49c3e8
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_scd.h
@@ -0,0 +1,654 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  SCD Constants and Macros			File: sb1250_scd.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the System Control and Debug module on the 1250.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003,2004,2005
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+#ifndef _SB1250_SCD_H
+#define _SB1250_SCD_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  System control/debug registers
+    ********************************************************************* */
+
+/*
+ * System Revision Register (Table 4-1)
+ */
+
+#define M_SYS_RESERVED		    _SB_MAKEMASK(8, 0)
+
+#define S_SYS_REVISION              _SB_MAKE64(8)
+#define M_SYS_REVISION              _SB_MAKEMASK(8, S_SYS_REVISION)
+#define V_SYS_REVISION(x)           _SB_MAKEVALUE(x, S_SYS_REVISION)
+#define G_SYS_REVISION(x)           _SB_GETVALUE(x, S_SYS_REVISION, M_SYS_REVISION)
+
+#define K_SYS_REVISION_BCM1250_PASS1	0x01
+
+#define K_SYS_REVISION_BCM1250_PASS2	0x03
+#define K_SYS_REVISION_BCM1250_A1	0x03	/* Pass 2.0 WB */
+#define K_SYS_REVISION_BCM1250_A2	0x04	/* Pass 2.0 FC */
+#define K_SYS_REVISION_BCM1250_A3	0x05	/* Pass 2.1 FC */
+#define K_SYS_REVISION_BCM1250_A4	0x06	/* Pass 2.1 WB */
+#define K_SYS_REVISION_BCM1250_A6	0x07	/* OR 0x04 (A2) w/WID != 0 */
+#define K_SYS_REVISION_BCM1250_A8	0x0b	/* A8/A10 */
+#define K_SYS_REVISION_BCM1250_A9	0x08
+#define K_SYS_REVISION_BCM1250_A10	K_SYS_REVISION_BCM1250_A8
+
+#define K_SYS_REVISION_BCM1250_PASS2_2	0x10
+#define K_SYS_REVISION_BCM1250_B0	K_SYS_REVISION_BCM1250_B1
+#define K_SYS_REVISION_BCM1250_B1	0x10
+#define K_SYS_REVISION_BCM1250_B2	0x11
+
+#define K_SYS_REVISION_BCM1250_C0	0x20
+#define K_SYS_REVISION_BCM1250_C1	0x21
+#define K_SYS_REVISION_BCM1250_C2	0x22
+#define K_SYS_REVISION_BCM1250_C3	0x23
+
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
+/* XXX: discourage people from using these constants.  */
+#define K_SYS_REVISION_PASS1	    K_SYS_REVISION_BCM1250_PASS1
+#define K_SYS_REVISION_PASS2	    K_SYS_REVISION_BCM1250_PASS2
+#define K_SYS_REVISION_PASS2_2	    K_SYS_REVISION_BCM1250_PASS2_2
+#define K_SYS_REVISION_PASS3	    K_SYS_REVISION_BCM1250_PASS3
+#define K_SYS_REVISION_BCM1250_PASS3	K_SYS_REVISION_BCM1250_C0
+#endif /* 1250 */
+
+#define K_SYS_REVISION_BCM112x_A1	0x20
+#define K_SYS_REVISION_BCM112x_A2	0x21
+#define K_SYS_REVISION_BCM112x_A3	0x22
+#define K_SYS_REVISION_BCM112x_A4	0x23
+#define K_SYS_REVISION_BCM112x_B0	0x30
+
+#define K_SYS_REVISION_BCM1480_S0	0x01
+#define K_SYS_REVISION_BCM1480_A1	0x02
+#define K_SYS_REVISION_BCM1480_A2	0x03
+#define K_SYS_REVISION_BCM1480_A3	0x04
+#define K_SYS_REVISION_BCM1480_B0	0x11
+
+/*Cache size - 23:20  of revision register*/
+#define S_SYS_L2C_SIZE            _SB_MAKE64(20)
+#define M_SYS_L2C_SIZE            _SB_MAKEMASK(4, S_SYS_L2C_SIZE)
+#define V_SYS_L2C_SIZE(x)         _SB_MAKEVALUE(x, S_SYS_L2C_SIZE)
+#define G_SYS_L2C_SIZE(x)         _SB_GETVALUE(x, S_SYS_L2C_SIZE, M_SYS_L2C_SIZE)
+
+#define K_SYS_L2C_SIZE_1MB	0
+#define K_SYS_L2C_SIZE_512KB	5
+#define K_SYS_L2C_SIZE_256KB	2
+#define K_SYS_L2C_SIZE_128KB	1
+
+#define K_SYS_L2C_SIZE_BCM1250	K_SYS_L2C_SIZE_512KB
+#define K_SYS_L2C_SIZE_BCM1125	K_SYS_L2C_SIZE_256KB
+#define K_SYS_L2C_SIZE_BCM1122	K_SYS_L2C_SIZE_128KB
+
+
+/* Number of CPU cores, bits 27:24  of revision register*/
+#define S_SYS_NUM_CPUS            _SB_MAKE64(24)
+#define M_SYS_NUM_CPUS            _SB_MAKEMASK(4, S_SYS_NUM_CPUS)
+#define V_SYS_NUM_CPUS(x)         _SB_MAKEVALUE(x, S_SYS_NUM_CPUS)
+#define G_SYS_NUM_CPUS(x)         _SB_GETVALUE(x, S_SYS_NUM_CPUS, M_SYS_NUM_CPUS)
+
+
+/* XXX: discourage people from using these constants.  */
+#define S_SYS_PART                  _SB_MAKE64(16)
+#define M_SYS_PART                  _SB_MAKEMASK(16, S_SYS_PART)
+#define V_SYS_PART(x)               _SB_MAKEVALUE(x, S_SYS_PART)
+#define G_SYS_PART(x)               _SB_GETVALUE(x, S_SYS_PART, M_SYS_PART)
+
+/* XXX: discourage people from using these constants.  */
+#define K_SYS_PART_SB1250           0x1250
+#define K_SYS_PART_BCM1120          0x1121
+#define K_SYS_PART_BCM1125          0x1123
+#define K_SYS_PART_BCM1125H         0x1124
+#define K_SYS_PART_BCM1122          0x1113
+
+
+/* The "peripheral set" (SOC type) is the low 4 bits of the "part" field.  */
+#define S_SYS_SOC_TYPE              _SB_MAKE64(16)
+#define M_SYS_SOC_TYPE              _SB_MAKEMASK(4, S_SYS_SOC_TYPE)
+#define V_SYS_SOC_TYPE(x)           _SB_MAKEVALUE(x, S_SYS_SOC_TYPE)
+#define G_SYS_SOC_TYPE(x)           _SB_GETVALUE(x, S_SYS_SOC_TYPE, M_SYS_SOC_TYPE)
+
+#define K_SYS_SOC_TYPE_BCM1250      0x0
+#define K_SYS_SOC_TYPE_BCM1120      0x1
+#define K_SYS_SOC_TYPE_BCM1250_ALT  0x2		/* 1250pass2 w/ 1/4 L2.  */
+#define K_SYS_SOC_TYPE_BCM1125      0x3
+#define K_SYS_SOC_TYPE_BCM1125H     0x4
+#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5		/* 1250pass2 w/ 1/2 L2.  */
+#define K_SYS_SOC_TYPE_BCM1x80      0x6
+#define K_SYS_SOC_TYPE_BCM1x55      0x7
+
+/*
+ * Calculate correct SOC type given a copy of system revision register.
+ *
+ * (For the assembler version, sysrev and dest may be the same register.
+ * Also, it clobbers AT.)
+ */
+#ifdef __ASSEMBLER__
+#define SYS_SOC_TYPE(dest, sysrev)					\
+	.set push ;							\
+	.set reorder ;							\
+	dsrl	dest, sysrev, S_SYS_SOC_TYPE ;				\
+	andi	dest, dest, (M_SYS_SOC_TYPE >> S_SYS_SOC_TYPE);		\
+	beq	dest, K_SYS_SOC_TYPE_BCM1250_ALT, 991f ;		\
+	beq	dest, K_SYS_SOC_TYPE_BCM1250_ALT2, 991f	 ;		\
+	b	992f ;							\
+991:	li	dest, K_SYS_SOC_TYPE_BCM1250 ;				\
+992:									\
+	.set pop
+#else
+#define SYS_SOC_TYPE(sysrev)						\
+	((G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT		\
+	  || G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT2)	\
+	 ? K_SYS_SOC_TYPE_BCM1250 : G_SYS_SOC_TYPE(sysrev))
+#endif
+
+#define S_SYS_WID                   _SB_MAKE64(32)
+#define M_SYS_WID                   _SB_MAKEMASK(32, S_SYS_WID)
+#define V_SYS_WID(x)                _SB_MAKEVALUE(x, S_SYS_WID)
+#define G_SYS_WID(x)                _SB_GETVALUE(x, S_SYS_WID, M_SYS_WID)
+
+/*
+ * System Manufacturing Register
+ * Register: SCD_SYSTEM_MANUF
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+/* Wafer ID: bits 31:0 */
+#define S_SYS_WAFERID1_200        _SB_MAKE64(0)
+#define M_SYS_WAFERID1_200        _SB_MAKEMASK(32, S_SYS_WAFERID1_200)
+#define V_SYS_WAFERID1_200(x)     _SB_MAKEVALUE(x, S_SYS_WAFERID1_200)
+#define G_SYS_WAFERID1_200(x)     _SB_GETVALUE(x, S_SYS_WAFERID1_200, M_SYS_WAFERID1_200)
+
+#define S_SYS_BIN                 _SB_MAKE64(32)
+#define M_SYS_BIN                 _SB_MAKEMASK(4, S_SYS_BIN)
+#define V_SYS_BIN(x)              _SB_MAKEVALUE(x, S_SYS_BIN)
+#define G_SYS_BIN(x)              _SB_GETVALUE(x, S_SYS_BIN, M_SYS_BIN)
+
+/* Wafer ID: bits 39:36 */
+#define S_SYS_WAFERID2_200        _SB_MAKE64(36)
+#define M_SYS_WAFERID2_200        _SB_MAKEMASK(4, S_SYS_WAFERID2_200)
+#define V_SYS_WAFERID2_200(x)     _SB_MAKEVALUE(x, S_SYS_WAFERID2_200)
+#define G_SYS_WAFERID2_200(x)     _SB_GETVALUE(x, S_SYS_WAFERID2_200, M_SYS_WAFERID2_200)
+
+/* Wafer ID: bits 39:0 */
+#define S_SYS_WAFERID_300         _SB_MAKE64(0)
+#define M_SYS_WAFERID_300         _SB_MAKEMASK(40, S_SYS_WAFERID_300)
+#define V_SYS_WAFERID_300(x)      _SB_MAKEVALUE(x, S_SYS_WAFERID_300)
+#define G_SYS_WAFERID_300(x)      _SB_GETVALUE(x, S_SYS_WAFERID_300, M_SYS_WAFERID_300)
+
+#define S_SYS_XPOS                _SB_MAKE64(40)
+#define M_SYS_XPOS                _SB_MAKEMASK(6, S_SYS_XPOS)
+#define V_SYS_XPOS(x)             _SB_MAKEVALUE(x, S_SYS_XPOS)
+#define G_SYS_XPOS(x)             _SB_GETVALUE(x, S_SYS_XPOS, M_SYS_XPOS)
+
+#define S_SYS_YPOS                _SB_MAKE64(46)
+#define M_SYS_YPOS                _SB_MAKEMASK(6, S_SYS_YPOS)
+#define V_SYS_YPOS(x)             _SB_MAKEVALUE(x, S_SYS_YPOS)
+#define G_SYS_YPOS(x)             _SB_GETVALUE(x, S_SYS_YPOS, M_SYS_YPOS)
+#endif
+
+
+/*
+ * System Config Register (Table 4-2)
+ * Register: SCD_SYSTEM_CFG
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define M_SYS_LDT_PLL_BYP           _SB_MAKEMASK1(3)
+#define M_SYS_PCI_SYNC_TEST_MODE    _SB_MAKEMASK1(4)
+#define M_SYS_IOB0_DIV              _SB_MAKEMASK1(5)
+#define M_SYS_IOB1_DIV              _SB_MAKEMASK1(6)
+
+#define S_SYS_PLL_DIV               _SB_MAKE64(7)
+#define M_SYS_PLL_DIV               _SB_MAKEMASK(5, S_SYS_PLL_DIV)
+#define V_SYS_PLL_DIV(x)            _SB_MAKEVALUE(x, S_SYS_PLL_DIV)
+#define G_SYS_PLL_DIV(x)            _SB_GETVALUE(x, S_SYS_PLL_DIV, M_SYS_PLL_DIV)
+
+#define M_SYS_SER0_ENABLE           _SB_MAKEMASK1(12)
+#define M_SYS_SER0_RSTB_EN          _SB_MAKEMASK1(13)
+#define M_SYS_SER1_ENABLE           _SB_MAKEMASK1(14)
+#define M_SYS_SER1_RSTB_EN          _SB_MAKEMASK1(15)
+#define M_SYS_PCMCIA_ENABLE         _SB_MAKEMASK1(16)
+
+#define S_SYS_BOOT_MODE             _SB_MAKE64(17)
+#define M_SYS_BOOT_MODE             _SB_MAKEMASK(2, S_SYS_BOOT_MODE)
+#define V_SYS_BOOT_MODE(x)          _SB_MAKEVALUE(x, S_SYS_BOOT_MODE)
+#define G_SYS_BOOT_MODE(x)          _SB_GETVALUE(x, S_SYS_BOOT_MODE, M_SYS_BOOT_MODE)
+#define K_SYS_BOOT_MODE_ROM32       0
+#define K_SYS_BOOT_MODE_ROM8        1
+#define K_SYS_BOOT_MODE_SMBUS_SMALL 2
+#define K_SYS_BOOT_MODE_SMBUS_BIG   3
+
+#define M_SYS_PCI_HOST              _SB_MAKEMASK1(19)
+#define M_SYS_PCI_ARBITER           _SB_MAKEMASK1(20)
+#define M_SYS_SOUTH_ON_LDT          _SB_MAKEMASK1(21)
+#define M_SYS_BIG_ENDIAN            _SB_MAKEMASK1(22)
+#define M_SYS_GENCLK_EN             _SB_MAKEMASK1(23)
+#define M_SYS_LDT_TEST_EN           _SB_MAKEMASK1(24)
+#define M_SYS_GEN_PARITY_EN         _SB_MAKEMASK1(25)
+
+#define S_SYS_CONFIG                26
+#define M_SYS_CONFIG                _SB_MAKEMASK(6, S_SYS_CONFIG)
+#define V_SYS_CONFIG(x)             _SB_MAKEVALUE(x, S_SYS_CONFIG)
+#define G_SYS_CONFIG(x)             _SB_GETVALUE(x, S_SYS_CONFIG, M_SYS_CONFIG)
+
+/* The following bits are writeable by JTAG only. */
+
+#define M_SYS_CLKSTOP               _SB_MAKEMASK1(32)
+#define M_SYS_CLKSTEP               _SB_MAKEMASK1(33)
+
+#define S_SYS_CLKCOUNT              34
+#define M_SYS_CLKCOUNT              _SB_MAKEMASK(8, S_SYS_CLKCOUNT)
+#define V_SYS_CLKCOUNT(x)           _SB_MAKEVALUE(x, S_SYS_CLKCOUNT)
+#define G_SYS_CLKCOUNT(x)           _SB_GETVALUE(x, S_SYS_CLKCOUNT, M_SYS_CLKCOUNT)
+
+#define M_SYS_PLL_BYPASS            _SB_MAKEMASK1(42)
+
+#define S_SYS_PLL_IREF		    43
+#define M_SYS_PLL_IREF		    _SB_MAKEMASK(2, S_SYS_PLL_IREF)
+
+#define S_SYS_PLL_VCO		    45
+#define M_SYS_PLL_VCO		    _SB_MAKEMASK(2, S_SYS_PLL_VCO)
+
+#define S_SYS_PLL_VREG		    47
+#define M_SYS_PLL_VREG		    _SB_MAKEMASK(2, S_SYS_PLL_VREG)
+
+#define M_SYS_MEM_RESET             _SB_MAKEMASK1(49)
+#define M_SYS_L2C_RESET             _SB_MAKEMASK1(50)
+#define M_SYS_IO_RESET_0            _SB_MAKEMASK1(51)
+#define M_SYS_IO_RESET_1            _SB_MAKEMASK1(52)
+#define M_SYS_SCD_RESET             _SB_MAKEMASK1(53)
+
+/* End of bits writable by JTAG only. */
+
+#define M_SYS_CPU_RESET_0           _SB_MAKEMASK1(54)
+#define M_SYS_CPU_RESET_1           _SB_MAKEMASK1(55)
+
+#define M_SYS_UNICPU0               _SB_MAKEMASK1(56)
+#define M_SYS_UNICPU1               _SB_MAKEMASK1(57)
+
+#define M_SYS_SB_SOFTRES            _SB_MAKEMASK1(58)
+#define M_SYS_EXT_RESET             _SB_MAKEMASK1(59)
+#define M_SYS_SYSTEM_RESET          _SB_MAKEMASK1(60)
+
+#define M_SYS_MISR_MODE             _SB_MAKEMASK1(61)
+#define M_SYS_MISR_RESET            _SB_MAKEMASK1(62)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_SYS_SW_FLAG		    _SB_MAKEMASK1(63)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#endif
+
+
+/*
+ * Mailbox Registers (Table 4-3)
+ * Registers: SCD_MBOX_CPU_x
+ */
+
+#define S_MBOX_INT_3                0
+#define M_MBOX_INT_3                _SB_MAKEMASK(16, S_MBOX_INT_3)
+#define S_MBOX_INT_2                16
+#define M_MBOX_INT_2                _SB_MAKEMASK(16, S_MBOX_INT_2)
+#define S_MBOX_INT_1                32
+#define M_MBOX_INT_1                _SB_MAKEMASK(16, S_MBOX_INT_1)
+#define S_MBOX_INT_0                48
+#define M_MBOX_INT_0                _SB_MAKEMASK(16, S_MBOX_INT_0)
+
+/*
+ * Watchdog Registers (Table 4-8) (Table 4-9) (Table 4-10)
+ * Registers: SCD_WDOG_INIT_CNT_x
+ */
+
+#define V_SCD_WDOG_FREQ             1000000
+
+#define S_SCD_WDOG_INIT             0
+#define M_SCD_WDOG_INIT             _SB_MAKEMASK(23, S_SCD_WDOG_INIT)
+
+#define S_SCD_WDOG_CNT              0
+#define M_SCD_WDOG_CNT              _SB_MAKEMASK(23, S_SCD_WDOG_CNT)
+
+#define S_SCD_WDOG_ENABLE           0
+#define M_SCD_WDOG_ENABLE           _SB_MAKEMASK1(S_SCD_WDOG_ENABLE)
+
+#define S_SCD_WDOG_RESET_TYPE       2
+#define M_SCD_WDOG_RESET_TYPE       _SB_MAKEMASK(3, S_SCD_WDOG_RESET_TYPE)
+#define V_SCD_WDOG_RESET_TYPE(x)    _SB_MAKEVALUE(x, S_SCD_WDOG_RESET_TYPE)
+#define G_SCD_WDOG_RESET_TYPE(x)    _SB_GETVALUE(x, S_SCD_WDOG_RESET_TYPE, M_SCD_WDOG_RESET_TYPE)
+
+#define K_SCD_WDOG_RESET_FULL       0	/* actually, (x & 1) == 0  */
+#define K_SCD_WDOG_RESET_SOFT       1
+#define K_SCD_WDOG_RESET_CPU0       3
+#define K_SCD_WDOG_RESET_CPU1       5
+#define K_SCD_WDOG_RESET_BOTH_CPUS  7
+
+/* This feature is present in 1250 C0 and later, but *not* in 112x A revs.  */
+#if SIBYTE_HDR_FEATURE(1250, PASS3)
+#define S_SCD_WDOG_HAS_RESET        8
+#define M_SCD_WDOG_HAS_RESET        _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET)
+#endif
+
+
+/*
+ * Timer Registers (Table 4-11) (Table 4-12) (Table 4-13)
+ */
+
+#define V_SCD_TIMER_FREQ            1000000
+
+#define S_SCD_TIMER_INIT            0
+#define M_SCD_TIMER_INIT            _SB_MAKEMASK(23, S_SCD_TIMER_INIT)
+#define V_SCD_TIMER_INIT(x)         _SB_MAKEVALUE(x, S_SCD_TIMER_INIT)
+#define G_SCD_TIMER_INIT(x)         _SB_GETVALUE(x, S_SCD_TIMER_INIT, M_SCD_TIMER_INIT)
+
+#define V_SCD_TIMER_WIDTH	    23
+#define S_SCD_TIMER_CNT             0
+#define M_SCD_TIMER_CNT             _SB_MAKEMASK(V_SCD_TIMER_WIDTH, S_SCD_TIMER_CNT)
+#define V_SCD_TIMER_CNT(x)         _SB_MAKEVALUE(x, S_SCD_TIMER_CNT)
+#define G_SCD_TIMER_CNT(x)         _SB_GETVALUE(x, S_SCD_TIMER_CNT, M_SCD_TIMER_CNT)
+
+#define M_SCD_TIMER_ENABLE          _SB_MAKEMASK1(0)
+#define M_SCD_TIMER_MODE            _SB_MAKEMASK1(1)
+#define M_SCD_TIMER_MODE_CONTINUOUS M_SCD_TIMER_MODE
+
+/*
+ * System Performance Counters
+ */
+
+#define S_SPC_CFG_SRC0            0
+#define M_SPC_CFG_SRC0            _SB_MAKEMASK(8, S_SPC_CFG_SRC0)
+#define V_SPC_CFG_SRC0(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC0)
+#define G_SPC_CFG_SRC0(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC0, M_SPC_CFG_SRC0)
+
+#define S_SPC_CFG_SRC1            8
+#define M_SPC_CFG_SRC1            _SB_MAKEMASK(8, S_SPC_CFG_SRC1)
+#define V_SPC_CFG_SRC1(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC1)
+#define G_SPC_CFG_SRC1(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC1, M_SPC_CFG_SRC1)
+
+#define S_SPC_CFG_SRC2            16
+#define M_SPC_CFG_SRC2            _SB_MAKEMASK(8, S_SPC_CFG_SRC2)
+#define V_SPC_CFG_SRC2(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC2)
+#define G_SPC_CFG_SRC2(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC2, M_SPC_CFG_SRC2)
+
+#define S_SPC_CFG_SRC3            24
+#define M_SPC_CFG_SRC3            _SB_MAKEMASK(8, S_SPC_CFG_SRC3)
+#define V_SPC_CFG_SRC3(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC3)
+#define G_SPC_CFG_SRC3(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC3, M_SPC_CFG_SRC3)
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define M_SPC_CFG_CLEAR		_SB_MAKEMASK1(32)
+#define M_SPC_CFG_ENABLE	_SB_MAKEMASK1(33)
+#endif
+
+
+/*
+ * Bus Watcher
+ */
+
+#define S_SCD_BERR_TID            8
+#define M_SCD_BERR_TID            _SB_MAKEMASK(10, S_SCD_BERR_TID)
+#define V_SCD_BERR_TID(x)         _SB_MAKEVALUE(x, S_SCD_BERR_TID)
+#define G_SCD_BERR_TID(x)         _SB_GETVALUE(x, S_SCD_BERR_TID, M_SCD_BERR_TID)
+
+#define S_SCD_BERR_RID            18
+#define M_SCD_BERR_RID            _SB_MAKEMASK(4, S_SCD_BERR_RID)
+#define V_SCD_BERR_RID(x)         _SB_MAKEVALUE(x, S_SCD_BERR_RID)
+#define G_SCD_BERR_RID(x)         _SB_GETVALUE(x, S_SCD_BERR_RID, M_SCD_BERR_RID)
+
+#define S_SCD_BERR_DCODE          22
+#define M_SCD_BERR_DCODE          _SB_MAKEMASK(3, S_SCD_BERR_DCODE)
+#define V_SCD_BERR_DCODE(x)       _SB_MAKEVALUE(x, S_SCD_BERR_DCODE)
+#define G_SCD_BERR_DCODE(x)       _SB_GETVALUE(x, S_SCD_BERR_DCODE, M_SCD_BERR_DCODE)
+
+#define M_SCD_BERR_MULTERRS       _SB_MAKEMASK1(30)
+
+
+#define S_SCD_L2ECC_CORR_D        0
+#define M_SCD_L2ECC_CORR_D        _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_D)
+#define V_SCD_L2ECC_CORR_D(x)     _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_D)
+#define G_SCD_L2ECC_CORR_D(x)     _SB_GETVALUE(x, S_SCD_L2ECC_CORR_D, M_SCD_L2ECC_CORR_D)
+
+#define S_SCD_L2ECC_BAD_D         8
+#define M_SCD_L2ECC_BAD_D         _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_D)
+#define V_SCD_L2ECC_BAD_D(x)      _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_D)
+#define G_SCD_L2ECC_BAD_D(x)      _SB_GETVALUE(x, S_SCD_L2ECC_BAD_D, M_SCD_L2ECC_BAD_D)
+
+#define S_SCD_L2ECC_CORR_T        16
+#define M_SCD_L2ECC_CORR_T        _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_T)
+#define V_SCD_L2ECC_CORR_T(x)     _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_T)
+#define G_SCD_L2ECC_CORR_T(x)     _SB_GETVALUE(x, S_SCD_L2ECC_CORR_T, M_SCD_L2ECC_CORR_T)
+
+#define S_SCD_L2ECC_BAD_T         24
+#define M_SCD_L2ECC_BAD_T         _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_T)
+#define V_SCD_L2ECC_BAD_T(x)      _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_T)
+#define G_SCD_L2ECC_BAD_T(x)      _SB_GETVALUE(x, S_SCD_L2ECC_BAD_T, M_SCD_L2ECC_BAD_T)
+
+#define S_SCD_MEM_ECC_CORR        0
+#define M_SCD_MEM_ECC_CORR        _SB_MAKEMASK(8, S_SCD_MEM_ECC_CORR)
+#define V_SCD_MEM_ECC_CORR(x)     _SB_MAKEVALUE(x, S_SCD_MEM_ECC_CORR)
+#define G_SCD_MEM_ECC_CORR(x)     _SB_GETVALUE(x, S_SCD_MEM_ECC_CORR, M_SCD_MEM_ECC_CORR)
+
+#define S_SCD_MEM_ECC_BAD         8
+#define M_SCD_MEM_ECC_BAD         _SB_MAKEMASK(8, S_SCD_MEM_ECC_BAD)
+#define V_SCD_MEM_ECC_BAD(x)      _SB_MAKEVALUE(x, S_SCD_MEM_ECC_BAD)
+#define G_SCD_MEM_ECC_BAD(x)      _SB_GETVALUE(x, S_SCD_MEM_ECC_BAD, M_SCD_MEM_ECC_BAD)
+
+#define S_SCD_MEM_BUSERR          16
+#define M_SCD_MEM_BUSERR          _SB_MAKEMASK(8, S_SCD_MEM_BUSERR)
+#define V_SCD_MEM_BUSERR(x)       _SB_MAKEVALUE(x, S_SCD_MEM_BUSERR)
+#define G_SCD_MEM_BUSERR(x)       _SB_GETVALUE(x, S_SCD_MEM_BUSERR, M_SCD_MEM_BUSERR)
+
+
+/*
+ * Address Trap Registers
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define M_ATRAP_INDEX		  _SB_MAKEMASK(4, 0)
+#define M_ATRAP_ADDRESS		  _SB_MAKEMASK(40, 0)
+
+#define S_ATRAP_CFG_CNT            0
+#define M_ATRAP_CFG_CNT            _SB_MAKEMASK(3, S_ATRAP_CFG_CNT)
+#define V_ATRAP_CFG_CNT(x)         _SB_MAKEVALUE(x, S_ATRAP_CFG_CNT)
+#define G_ATRAP_CFG_CNT(x)         _SB_GETVALUE(x, S_ATRAP_CFG_CNT, M_ATRAP_CFG_CNT)
+
+#define M_ATRAP_CFG_WRITE	   _SB_MAKEMASK1(3)
+#define M_ATRAP_CFG_ALL	  	   _SB_MAKEMASK1(4)
+#define M_ATRAP_CFG_INV	   	   _SB_MAKEMASK1(5)
+#define M_ATRAP_CFG_USESRC	   _SB_MAKEMASK1(6)
+#define M_ATRAP_CFG_SRCINV	   _SB_MAKEMASK1(7)
+
+#define S_ATRAP_CFG_AGENTID     8
+#define M_ATRAP_CFG_AGENTID     _SB_MAKEMASK(4, S_ATRAP_CFG_AGENTID)
+#define V_ATRAP_CFG_AGENTID(x)  _SB_MAKEVALUE(x, S_ATRAP_CFG_AGENTID)
+#define G_ATRAP_CFG_AGENTID(x)  _SB_GETVALUE(x, S_ATRAP_CFG_AGENTID, M_ATRAP_CFG_AGENTID)
+
+#define K_BUS_AGENT_CPU0	0
+#define K_BUS_AGENT_CPU1	1
+#define K_BUS_AGENT_IOB0	2
+#define K_BUS_AGENT_IOB1	3
+#define K_BUS_AGENT_SCD	4
+#define K_BUS_AGENT_L2C	6
+#define K_BUS_AGENT_MC	7
+
+#define S_ATRAP_CFG_CATTR     12
+#define M_ATRAP_CFG_CATTR     _SB_MAKEMASK(3, S_ATRAP_CFG_CATTR)
+#define V_ATRAP_CFG_CATTR(x)  _SB_MAKEVALUE(x, S_ATRAP_CFG_CATTR)
+#define G_ATRAP_CFG_CATTR(x)  _SB_GETVALUE(x, S_ATRAP_CFG_CATTR, M_ATRAP_CFG_CATTR)
+
+#define K_ATRAP_CFG_CATTR_IGNORE	0
+#define K_ATRAP_CFG_CATTR_UNC    	1
+#define K_ATRAP_CFG_CATTR_CACHEABLE	2
+#define K_ATRAP_CFG_CATTR_NONCOH  	3
+#define K_ATRAP_CFG_CATTR_COHERENT	4
+#define K_ATRAP_CFG_CATTR_NOTUNC	5
+#define K_ATRAP_CFG_CATTR_NOTNONCOH	6
+#define K_ATRAP_CFG_CATTR_NOTCOHERENT   7
+
+#endif	/* 1250/112x */
+
+/*
+ * Trace Buffer Config register
+ */
+
+#define M_SCD_TRACE_CFG_RESET           _SB_MAKEMASK1(0)
+#define M_SCD_TRACE_CFG_START_READ      _SB_MAKEMASK1(1)
+#define M_SCD_TRACE_CFG_START           _SB_MAKEMASK1(2)
+#define M_SCD_TRACE_CFG_STOP            _SB_MAKEMASK1(3)
+#define M_SCD_TRACE_CFG_FREEZE          _SB_MAKEMASK1(4)
+#define M_SCD_TRACE_CFG_FREEZE_FULL     _SB_MAKEMASK1(5)
+#define M_SCD_TRACE_CFG_DEBUG_FULL      _SB_MAKEMASK1(6)
+#define M_SCD_TRACE_CFG_FULL            _SB_MAKEMASK1(7)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_SCD_TRACE_CFG_FORCECNT        _SB_MAKEMASK1(8)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+/*
+ * This field is the same on the 1250/112x and 1480, just located in
+ * a slightly different place in the register.
+ */
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define S_SCD_TRACE_CFG_CUR_ADDR        10
+#else
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SCD_TRACE_CFG_CUR_ADDR        24
+#endif	/* 1480 */
+#endif  /* 1250/112x */
+
+#define M_SCD_TRACE_CFG_CUR_ADDR        _SB_MAKEMASK(8, S_SCD_TRACE_CFG_CUR_ADDR)
+#define V_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_MAKEVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR)
+#define G_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_GETVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR, M_SCD_TRACE_CFG_CUR_ADDR)
+
+/*
+ * Trace Event registers
+ */
+
+#define S_SCD_TREVT_ADDR_MATCH          0
+#define M_SCD_TREVT_ADDR_MATCH          _SB_MAKEMASK(4, S_SCD_TREVT_ADDR_MATCH)
+#define V_SCD_TREVT_ADDR_MATCH(x)       _SB_MAKEVALUE(x, S_SCD_TREVT_ADDR_MATCH)
+#define G_SCD_TREVT_ADDR_MATCH(x)       _SB_GETVALUE(x, S_SCD_TREVT_ADDR_MATCH, M_SCD_TREVT_ADDR_MATCH)
+
+#define M_SCD_TREVT_REQID_MATCH         _SB_MAKEMASK1(4)
+#define M_SCD_TREVT_DATAID_MATCH        _SB_MAKEMASK1(5)
+#define M_SCD_TREVT_RESPID_MATCH        _SB_MAKEMASK1(6)
+#define M_SCD_TREVT_INTERRUPT           _SB_MAKEMASK1(7)
+#define M_SCD_TREVT_DEBUG_PIN           _SB_MAKEMASK1(9)
+#define M_SCD_TREVT_WRITE               _SB_MAKEMASK1(10)
+#define M_SCD_TREVT_READ                _SB_MAKEMASK1(11)
+
+#define S_SCD_TREVT_REQID               12
+#define M_SCD_TREVT_REQID               _SB_MAKEMASK(4, S_SCD_TREVT_REQID)
+#define V_SCD_TREVT_REQID(x)            _SB_MAKEVALUE(x, S_SCD_TREVT_REQID)
+#define G_SCD_TREVT_REQID(x)            _SB_GETVALUE(x, S_SCD_TREVT_REQID, M_SCD_TREVT_REQID)
+
+#define S_SCD_TREVT_RESPID              16
+#define M_SCD_TREVT_RESPID              _SB_MAKEMASK(4, S_SCD_TREVT_RESPID)
+#define V_SCD_TREVT_RESPID(x)           _SB_MAKEVALUE(x, S_SCD_TREVT_RESPID)
+#define G_SCD_TREVT_RESPID(x)           _SB_GETVALUE(x, S_SCD_TREVT_RESPID, M_SCD_TREVT_RESPID)
+
+#define S_SCD_TREVT_DATAID              20
+#define M_SCD_TREVT_DATAID              _SB_MAKEMASK(4, S_SCD_TREVT_DATAID)
+#define V_SCD_TREVT_DATAID(x)           _SB_MAKEVALUE(x, S_SCD_TREVT_DATAID)
+#define G_SCD_TREVT_DATAID(x)           _SB_GETVALUE(x, S_SCD_TREVT_DATAID, M_SCD_TREVT_DATID)
+
+#define S_SCD_TREVT_COUNT               24
+#define M_SCD_TREVT_COUNT               _SB_MAKEMASK(8, S_SCD_TREVT_COUNT)
+#define V_SCD_TREVT_COUNT(x)            _SB_MAKEVALUE(x, S_SCD_TREVT_COUNT)
+#define G_SCD_TREVT_COUNT(x)            _SB_GETVALUE(x, S_SCD_TREVT_COUNT, M_SCD_TREVT_COUNT)
+
+/*
+ * Trace Sequence registers
+ */
+
+#define S_SCD_TRSEQ_EVENT4              0
+#define M_SCD_TRSEQ_EVENT4              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT4)
+#define V_SCD_TRSEQ_EVENT4(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT4)
+#define G_SCD_TRSEQ_EVENT4(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT4, M_SCD_TRSEQ_EVENT4)
+
+#define S_SCD_TRSEQ_EVENT3              4
+#define M_SCD_TRSEQ_EVENT3              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT3)
+#define V_SCD_TRSEQ_EVENT3(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT3)
+#define G_SCD_TRSEQ_EVENT3(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT3, M_SCD_TRSEQ_EVENT3)
+
+#define S_SCD_TRSEQ_EVENT2              8
+#define M_SCD_TRSEQ_EVENT2              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT2)
+#define V_SCD_TRSEQ_EVENT2(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT2)
+#define G_SCD_TRSEQ_EVENT2(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT2, M_SCD_TRSEQ_EVENT2)
+
+#define S_SCD_TRSEQ_EVENT1              12
+#define M_SCD_TRSEQ_EVENT1              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT1)
+#define V_SCD_TRSEQ_EVENT1(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT1)
+#define G_SCD_TRSEQ_EVENT1(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT1, M_SCD_TRSEQ_EVENT1)
+
+#define K_SCD_TRSEQ_E0                  0
+#define K_SCD_TRSEQ_E1                  1
+#define K_SCD_TRSEQ_E2                  2
+#define K_SCD_TRSEQ_E3                  3
+#define K_SCD_TRSEQ_E0_E1               4
+#define K_SCD_TRSEQ_E1_E2               5
+#define K_SCD_TRSEQ_E2_E3               6
+#define K_SCD_TRSEQ_E0_E1_E2            7
+#define K_SCD_TRSEQ_E0_E1_E2_E3         8
+#define K_SCD_TRSEQ_E0E1                9
+#define K_SCD_TRSEQ_E0E1E2              10
+#define K_SCD_TRSEQ_E0E1E2E3            11
+#define K_SCD_TRSEQ_E0E1_E2             12
+#define K_SCD_TRSEQ_E0E1_E2E3           13
+#define K_SCD_TRSEQ_E0E1_E2_E3          14
+#define K_SCD_TRSEQ_IGNORED             15
+
+#define K_SCD_TRSEQ_TRIGGER_ALL         (V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \
+                                         V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \
+                                         V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \
+                                         V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED))
+
+#define S_SCD_TRSEQ_FUNCTION            16
+#define M_SCD_TRSEQ_FUNCTION            _SB_MAKEMASK(4, S_SCD_TRSEQ_FUNCTION)
+#define V_SCD_TRSEQ_FUNCTION(x)         _SB_MAKEVALUE(x, S_SCD_TRSEQ_FUNCTION)
+#define G_SCD_TRSEQ_FUNCTION(x)         _SB_GETVALUE(x, S_SCD_TRSEQ_FUNCTION, M_SCD_TRSEQ_FUNCTION)
+
+#define K_SCD_TRSEQ_FUNC_NOP            0
+#define K_SCD_TRSEQ_FUNC_START          1
+#define K_SCD_TRSEQ_FUNC_STOP           2
+#define K_SCD_TRSEQ_FUNC_FREEZE         3
+
+#define V_SCD_TRSEQ_FUNC_NOP            V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP)
+#define V_SCD_TRSEQ_FUNC_START          V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START)
+#define V_SCD_TRSEQ_FUNC_STOP           V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP)
+#define V_SCD_TRSEQ_FUNC_FREEZE         V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE)
+
+#define M_SCD_TRSEQ_ASAMPLE             _SB_MAKEMASK1(18)
+#define M_SCD_TRSEQ_DSAMPLE             _SB_MAKEMASK1(19)
+#define M_SCD_TRSEQ_DEBUGPIN            _SB_MAKEMASK1(20)
+#define M_SCD_TRSEQ_DEBUGCPU            _SB_MAKEMASK1(21)
+#define M_SCD_TRSEQ_CLEARUSE            _SB_MAKEMASK1(22)
+#define M_SCD_TRSEQ_ALLD_A              _SB_MAKEMASK1(23)
+#define M_SCD_TRSEQ_ALL_A               _SB_MAKEMASK1(24)
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_smbus.h b/arch/mips/include/asm/sibyte/sb1250_smbus.h
new file mode 100644
index 0000000..0476992
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_smbus.h
@@ -0,0 +1,204 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  SMBUS Constants                          File: sb1250_smbus.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the SB1250's SMbus devices.
+    *
+    *  SB1250 specification level:  10/21/02
+    *  BCM1280 specification level:  11/24/03
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_SMBUS_H
+#define _SB1250_SMBUS_H
+
+#include "sb1250_defs.h"
+
+/*
+ * SMBus Clock Frequency Register (Table 14-2)
+ */
+
+#define S_SMB_FREQ_DIV              0
+#define M_SMB_FREQ_DIV              _SB_MAKEMASK(13, S_SMB_FREQ_DIV)
+#define V_SMB_FREQ_DIV(x)           _SB_MAKEVALUE(x, S_SMB_FREQ_DIV)
+
+#define K_SMB_FREQ_400KHZ	    0x1F
+#define K_SMB_FREQ_100KHZ	    0x7D
+#define K_SMB_FREQ_10KHZ	    1250
+
+#define S_SMB_CMD                   0
+#define M_SMB_CMD                   _SB_MAKEMASK(8, S_SMB_CMD)
+#define V_SMB_CMD(x)                _SB_MAKEVALUE(x, S_SMB_CMD)
+
+/*
+ * SMBus control register (Table 14-4)
+ */
+
+#define M_SMB_ERR_INTR              _SB_MAKEMASK1(0)
+#define M_SMB_FINISH_INTR           _SB_MAKEMASK1(1)
+
+#define S_SMB_DATA_OUT              4
+#define M_SMB_DATA_OUT              _SB_MAKEMASK1(S_SMB_DATA_OUT)
+#define V_SMB_DATA_OUT(x)           _SB_MAKEVALUE(x, S_SMB_DATA_OUT)
+
+#define M_SMB_DATA_DIR              _SB_MAKEMASK1(5)
+#define M_SMB_DATA_DIR_OUTPUT       M_SMB_DATA_DIR
+#define M_SMB_CLK_OUT               _SB_MAKEMASK1(6)
+#define M_SMB_DIRECT_ENABLE         _SB_MAKEMASK1(7)
+
+/*
+ * SMBus status registers (Table 14-5)
+ */
+
+#define M_SMB_BUSY                  _SB_MAKEMASK1(0)
+#define M_SMB_ERROR                 _SB_MAKEMASK1(1)
+#define M_SMB_ERROR_TYPE            _SB_MAKEMASK1(2)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SMB_SCL_IN                5
+#define M_SMB_SCL_IN                _SB_MAKEMASK1(S_SMB_SCL_IN)
+#define V_SMB_SCL_IN(x)             _SB_MAKEVALUE(x, S_SMB_SCL_IN)
+#define G_SMB_SCL_IN(x)             _SB_GETVALUE(x, S_SMB_SCL_IN, M_SMB_SCL_IN)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_SMB_REF                   6
+#define M_SMB_REF                   _SB_MAKEMASK1(S_SMB_REF)
+#define V_SMB_REF(x)                _SB_MAKEVALUE(x, S_SMB_REF)
+#define G_SMB_REF(x)                _SB_GETVALUE(x, S_SMB_REF, M_SMB_REF)
+
+#define S_SMB_DATA_IN               7
+#define M_SMB_DATA_IN               _SB_MAKEMASK1(S_SMB_DATA_IN)
+#define V_SMB_DATA_IN(x)            _SB_MAKEVALUE(x, S_SMB_DATA_IN)
+#define G_SMB_DATA_IN(x)            _SB_GETVALUE(x, S_SMB_DATA_IN, M_SMB_DATA_IN)
+
+/*
+ * SMBus Start/Command registers (Table 14-9)
+ */
+
+#define S_SMB_ADDR                  0
+#define M_SMB_ADDR                  _SB_MAKEMASK(7, S_SMB_ADDR)
+#define V_SMB_ADDR(x)               _SB_MAKEVALUE(x, S_SMB_ADDR)
+#define G_SMB_ADDR(x)               _SB_GETVALUE(x, S_SMB_ADDR, M_SMB_ADDR)
+
+#define M_SMB_QDATA                 _SB_MAKEMASK1(7)
+
+#define S_SMB_TT                    8
+#define M_SMB_TT                    _SB_MAKEMASK(3, S_SMB_TT)
+#define V_SMB_TT(x)                 _SB_MAKEVALUE(x, S_SMB_TT)
+#define G_SMB_TT(x)                 _SB_GETVALUE(x, S_SMB_TT, M_SMB_TT)
+
+#define K_SMB_TT_WR1BYTE            0
+#define K_SMB_TT_WR2BYTE            1
+#define K_SMB_TT_WR3BYTE            2
+#define K_SMB_TT_CMD_RD1BYTE        3
+#define K_SMB_TT_CMD_RD2BYTE        4
+#define K_SMB_TT_RD1BYTE            5
+#define K_SMB_TT_QUICKCMD           6
+#define K_SMB_TT_EEPROMREAD         7
+
+#define V_SMB_TT_WR1BYTE	    V_SMB_TT(K_SMB_TT_WR1BYTE)
+#define V_SMB_TT_WR2BYTE	    V_SMB_TT(K_SMB_TT_WR2BYTE)
+#define V_SMB_TT_WR3BYTE	    V_SMB_TT(K_SMB_TT_WR3BYTE)
+#define V_SMB_TT_CMD_RD1BYTE	    V_SMB_TT(K_SMB_TT_CMD_RD1BYTE)
+#define V_SMB_TT_CMD_RD2BYTE	    V_SMB_TT(K_SMB_TT_CMD_RD2BYTE)
+#define V_SMB_TT_RD1BYTE	    V_SMB_TT(K_SMB_TT_RD1BYTE)
+#define V_SMB_TT_QUICKCMD	    V_SMB_TT(K_SMB_TT_QUICKCMD)
+#define V_SMB_TT_EEPROMREAD	    V_SMB_TT(K_SMB_TT_EEPROMREAD)
+
+#define M_SMB_PEC                   _SB_MAKEMASK1(15)
+
+/*
+ * SMBus Data Register (Table 14-6) and SMBus Extra Register (Table 14-7)
+ */
+
+#define S_SMB_LB                    0
+#define M_SMB_LB                    _SB_MAKEMASK(8, S_SMB_LB)
+#define V_SMB_LB(x)                 _SB_MAKEVALUE(x, S_SMB_LB)
+
+#define S_SMB_MB                    8
+#define M_SMB_MB                    _SB_MAKEMASK(8, S_SMB_MB)
+#define V_SMB_MB(x)                 _SB_MAKEVALUE(x, S_SMB_MB)
+
+
+/*
+ * SMBus Packet Error Check register (Table 14-8)
+ */
+
+#define S_SPEC_PEC                  0
+#define M_SPEC_PEC                  _SB_MAKEMASK(8, S_SPEC_PEC)
+#define V_SPEC_MB(x)                _SB_MAKEVALUE(x, S_SPEC_PEC)
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+
+#define S_SMB_CMDH                  8
+#define M_SMB_CMDH                  _SB_MAKEMASK(8, S_SMB_CMDH)
+#define V_SMB_CMDH(x)               _SB_MAKEVALUE(x, S_SMB_CMDH)
+
+#define M_SMB_EXTEND		    _SB_MAKEMASK1(14)
+
+#define S_SMB_DFMT                  8
+#define M_SMB_DFMT                  _SB_MAKEMASK(3, S_SMB_DFMT)
+#define V_SMB_DFMT(x)               _SB_MAKEVALUE(x, S_SMB_DFMT)
+#define G_SMB_DFMT(x)               _SB_GETVALUE(x, S_SMB_DFMT, M_SMB_DFMT)
+
+#define K_SMB_DFMT_1BYTE            0
+#define K_SMB_DFMT_2BYTE            1
+#define K_SMB_DFMT_3BYTE            2
+#define K_SMB_DFMT_4BYTE            3
+#define K_SMB_DFMT_NODATA           4
+#define K_SMB_DFMT_CMD4BYTE         5
+#define K_SMB_DFMT_CMD5BYTE         6
+#define K_SMB_DFMT_RESERVED         7
+
+#define V_SMB_DFMT_1BYTE	    V_SMB_DFMT(K_SMB_DFMT_1BYTE)
+#define V_SMB_DFMT_2BYTE	    V_SMB_DFMT(K_SMB_DFMT_2BYTE)
+#define V_SMB_DFMT_3BYTE	    V_SMB_DFMT(K_SMB_DFMT_3BYTE)
+#define V_SMB_DFMT_4BYTE	    V_SMB_DFMT(K_SMB_DFMT_4BYTE)
+#define V_SMB_DFMT_NODATA	    V_SMB_DFMT(K_SMB_DFMT_NODATA)
+#define V_SMB_DFMT_CMD4BYTE	    V_SMB_DFMT(K_SMB_DFMT_CMD4BYTE)
+#define V_SMB_DFMT_CMD5BYTE	    V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE)
+#define V_SMB_DFMT_RESERVED	    V_SMB_DFMT(K_SMB_DFMT_RESERVED)
+
+#define S_SMB_AFMT                  11
+#define M_SMB_AFMT                  _SB_MAKEMASK(2, S_SMB_AFMT)
+#define V_SMB_AFMT(x)               _SB_MAKEVALUE(x, S_SMB_AFMT)
+#define G_SMB_AFMT(x)               _SB_GETVALUE(x, S_SMB_AFMT, M_SMB_AFMT)
+
+#define K_SMB_AFMT_NONE             0
+#define K_SMB_AFMT_ADDR             1
+#define K_SMB_AFMT_ADDR_CMD1BYTE    2
+#define K_SMB_AFMT_ADDR_CMD2BYTE    3
+
+#define V_SMB_AFMT_NONE		    V_SMB_AFMT(K_SMB_AFMT_NONE)
+#define V_SMB_AFMT_ADDR		    V_SMB_AFMT(K_SMB_AFMT_ADDR)
+#define V_SMB_AFMT_ADDR_CMD1BYTE    V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD1BYTE)
+#define V_SMB_AFMT_ADDR_CMD2BYTE    V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD2BYTE)
+
+#define M_SMB_DIR		    _SB_MAKEMASK1(13)
+
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_syncser.h b/arch/mips/include/asm/sibyte/sb1250_syncser.h
new file mode 100644
index 0000000..d4b8558
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_syncser.h
@@ -0,0 +1,146 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Synchronous Serial Constants              File: sb1250_syncser.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the SB1250's Synchronous Serial
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_SYNCSER_H
+#define _SB1250_SYNCSER_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Serial Mode Configuration Register
+ */
+
+#define M_SYNCSER_CRC_MODE                 _SB_MAKEMASK1(0)
+#define M_SYNCSER_MSB_FIRST                _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_FLAG_NUM                 2
+#define M_SYNCSER_FLAG_NUM                 _SB_MAKEMASK(4, S_SYNCSER_FLAG_NUM)
+#define V_SYNCSER_FLAG_NUM                 _SB_MAKEVALUE(x, S_SYNCSER_FLAG_NUM)
+
+#define M_SYNCSER_FLAG_EN                  _SB_MAKEMASK1(6)
+#define M_SYNCSER_HDLC_EN                  _SB_MAKEMASK1(7)
+#define M_SYNCSER_LOOP_MODE                _SB_MAKEMASK1(8)
+#define M_SYNCSER_LOOPBACK                 _SB_MAKEMASK1(9)
+
+/*
+ * Serial Clock Source and Line Interface Mode Register
+ */
+
+#define M_SYNCSER_RXCLK_INV                _SB_MAKEMASK1(0)
+#define M_SYNCSER_RXCLK_EXT                _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_RXSYNC_DLY               2
+#define M_SYNCSER_RXSYNC_DLY               _SB_MAKEMASK(2, S_SYNCSER_RXSYNC_DLY)
+#define V_SYNCSER_RXSYNC_DLY(x)            _SB_MAKEVALUE(x, S_SYNCSER_RXSYNC_DLY)
+
+#define M_SYNCSER_RXSYNC_LOW               _SB_MAKEMASK1(4)
+#define M_SYNCSER_RXSTRB_LOW               _SB_MAKEMASK1(5)
+
+#define M_SYNCSER_RXSYNC_EDGE              _SB_MAKEMASK1(6)
+#define M_SYNCSER_RXSYNC_INT               _SB_MAKEMASK1(7)
+
+#define M_SYNCSER_TXCLK_INV                _SB_MAKEMASK1(8)
+#define M_SYNCSER_TXCLK_EXT                _SB_MAKEMASK1(9)
+
+#define S_SYNCSER_TXSYNC_DLY               10
+#define M_SYNCSER_TXSYNC_DLY               _SB_MAKEMASK(2, S_SYNCSER_TXSYNC_DLY)
+#define V_SYNCSER_TXSYNC_DLY(x)            _SB_MAKEVALUE(x, S_SYNCSER_TXSYNC_DLY)
+
+#define M_SYNCSER_TXSYNC_LOW               _SB_MAKEMASK1(12)
+#define M_SYNCSER_TXSTRB_LOW               _SB_MAKEMASK1(13)
+
+#define M_SYNCSER_TXSYNC_EDGE              _SB_MAKEMASK1(14)
+#define M_SYNCSER_TXSYNC_INT               _SB_MAKEMASK1(15)
+
+/*
+ * Serial Command Register
+ */
+
+#define M_SYNCSER_CMD_RX_EN                _SB_MAKEMASK1(0)
+#define M_SYNCSER_CMD_TX_EN                _SB_MAKEMASK1(1)
+#define M_SYNCSER_CMD_RX_RESET             _SB_MAKEMASK1(2)
+#define M_SYNCSER_CMD_TX_RESET             _SB_MAKEMASK1(3)
+#define M_SYNCSER_CMD_TX_PAUSE             _SB_MAKEMASK1(5)
+
+/*
+ * Serial DMA Enable Register
+ */
+
+#define M_SYNCSER_DMA_RX_EN                _SB_MAKEMASK1(0)
+#define M_SYNCSER_DMA_TX_EN                _SB_MAKEMASK1(4)
+
+/*
+ * Serial Status Register
+ */
+
+#define M_SYNCSER_RX_CRCERR                _SB_MAKEMASK1(0)
+#define M_SYNCSER_RX_ABORT                 _SB_MAKEMASK1(1)
+#define M_SYNCSER_RX_OCTET                 _SB_MAKEMASK1(2)
+#define M_SYNCSER_RX_LONGFRM               _SB_MAKEMASK1(3)
+#define M_SYNCSER_RX_SHORTFRM              _SB_MAKEMASK1(4)
+#define M_SYNCSER_RX_OVERRUN               _SB_MAKEMASK1(5)
+#define M_SYNCSER_RX_SYNC_ERR              _SB_MAKEMASK1(6)
+#define M_SYNCSER_TX_CRCERR                _SB_MAKEMASK1(8)
+#define M_SYNCSER_TX_UNDERRUN              _SB_MAKEMASK1(9)
+#define M_SYNCSER_TX_SYNC_ERR              _SB_MAKEMASK1(10)
+#define M_SYNCSER_TX_PAUSE_COMPLETE        _SB_MAKEMASK1(11)
+#define M_SYNCSER_RX_EOP_COUNT             _SB_MAKEMASK1(16)
+#define M_SYNCSER_RX_EOP_TIMER             _SB_MAKEMASK1(17)
+#define M_SYNCSER_RX_EOP_SEEN              _SB_MAKEMASK1(18)
+#define M_SYNCSER_RX_HWM                   _SB_MAKEMASK1(19)
+#define M_SYNCSER_RX_LWM                   _SB_MAKEMASK1(20)
+#define M_SYNCSER_RX_DSCR                  _SB_MAKEMASK1(21)
+#define M_SYNCSER_RX_DERR                  _SB_MAKEMASK1(22)
+#define M_SYNCSER_TX_EOP_COUNT             _SB_MAKEMASK1(24)
+#define M_SYNCSER_TX_EOP_TIMER             _SB_MAKEMASK1(25)
+#define M_SYNCSER_TX_EOP_SEEN              _SB_MAKEMASK1(26)
+#define M_SYNCSER_TX_HWM                   _SB_MAKEMASK1(27)
+#define M_SYNCSER_TX_LWM                   _SB_MAKEMASK1(28)
+#define M_SYNCSER_TX_DSCR                  _SB_MAKEMASK1(29)
+#define M_SYNCSER_TX_DERR                  _SB_MAKEMASK1(30)
+#define M_SYNCSER_TX_DZERO                 _SB_MAKEMASK1(31)
+
+/*
+ * Sequencer Table Entry format
+ */
+
+#define M_SYNCSER_SEQ_LAST                 _SB_MAKEMASK1(0)
+#define M_SYNCSER_SEQ_BYTE                 _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_SEQ_COUNT                2
+#define M_SYNCSER_SEQ_COUNT                _SB_MAKEMASK(4, S_SYNCSER_SEQ_COUNT)
+#define V_SYNCSER_SEQ_COUNT(x)             _SB_MAKEVALUE(x, S_SYNCSER_SEQ_COUNT)
+
+#define M_SYNCSER_SEQ_ENABLE               _SB_MAKEMASK1(6)
+#define M_SYNCSER_SEQ_STROBE               _SB_MAKEMASK1(7)
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_uart.h b/arch/mips/include/asm/sibyte/sb1250_uart.h
new file mode 100644
index 0000000..d835bf2
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_uart.h
@@ -0,0 +1,362 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  UART Constants				File: sb1250_uart.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the SB1250's UARTs
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_UART_H
+#define _SB1250_UART_H
+
+#include "sb1250_defs.h"
+
+/* **********************************************************************
+   * DUART Registers
+   ********************************************************************** */
+
+/*
+ * DUART Mode Register #1 (Table 10-3)
+ * Register: DUART_MODE_REG_1_A
+ * Register: DUART_MODE_REG_1_B
+ */
+
+#define S_DUART_BITS_PER_CHAR       0
+#define M_DUART_BITS_PER_CHAR       _SB_MAKEMASK(2, S_DUART_BITS_PER_CHAR)
+#define V_DUART_BITS_PER_CHAR(x)    _SB_MAKEVALUE(x, S_DUART_BITS_PER_CHAR)
+
+#define K_DUART_BITS_PER_CHAR_RSV0  0
+#define K_DUART_BITS_PER_CHAR_RSV1  1
+#define K_DUART_BITS_PER_CHAR_7     2
+#define K_DUART_BITS_PER_CHAR_8     3
+
+#define V_DUART_BITS_PER_CHAR_RSV0  V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV0)
+#define V_DUART_BITS_PER_CHAR_RSV1  V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV1)
+#define V_DUART_BITS_PER_CHAR_7     V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7)
+#define V_DUART_BITS_PER_CHAR_8     V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8)
+
+
+#define M_DUART_PARITY_TYPE_EVEN    0x00
+#define M_DUART_PARITY_TYPE_ODD     _SB_MAKEMASK1(2)
+
+#define S_DUART_PARITY_MODE          3
+#define M_DUART_PARITY_MODE         _SB_MAKEMASK(2, S_DUART_PARITY_MODE)
+#define V_DUART_PARITY_MODE(x)      _SB_MAKEVALUE(x, S_DUART_PARITY_MODE)
+
+#define K_DUART_PARITY_MODE_ADD       0
+#define K_DUART_PARITY_MODE_ADD_FIXED 1
+#define K_DUART_PARITY_MODE_NONE      2
+
+#define V_DUART_PARITY_MODE_ADD       V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD)
+#define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED)
+#define V_DUART_PARITY_MODE_NONE      V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE)
+
+#define M_DUART_TX_IRQ_SEL_TXRDY    0
+#define M_DUART_TX_IRQ_SEL_TXEMPT   _SB_MAKEMASK1(5)
+
+#define M_DUART_RX_IRQ_SEL_RXRDY    0
+#define M_DUART_RX_IRQ_SEL_RXFULL   _SB_MAKEMASK1(6)
+
+#define M_DUART_RX_RTS_ENA          _SB_MAKEMASK1(7)
+
+/*
+ * DUART Mode Register #2 (Table 10-4)
+ * Register: DUART_MODE_REG_2_A
+ * Register: DUART_MODE_REG_2_B
+ */
+
+#define M_DUART_MODE_RESERVED1      _SB_MAKEMASK(3, 0)   /* ignored */
+
+#define M_DUART_STOP_BIT_LEN_2      _SB_MAKEMASK1(3)
+#define M_DUART_STOP_BIT_LEN_1      0
+
+#define M_DUART_TX_CTS_ENA          _SB_MAKEMASK1(4)
+
+
+#define M_DUART_MODE_RESERVED2      _SB_MAKEMASK1(5)    /* must be zero */
+
+#define S_DUART_CHAN_MODE	    6
+#define M_DUART_CHAN_MODE           _SB_MAKEMASK(2, S_DUART_CHAN_MODE)
+#define V_DUART_CHAN_MODE(x)	    _SB_MAKEVALUE(x, S_DUART_CHAN_MODE)
+
+#define K_DUART_CHAN_MODE_NORMAL    0
+#define K_DUART_CHAN_MODE_LCL_LOOP  2
+#define K_DUART_CHAN_MODE_REM_LOOP  3
+
+#define V_DUART_CHAN_MODE_NORMAL    V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_NORMAL)
+#define V_DUART_CHAN_MODE_LCL_LOOP  V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_LCL_LOOP)
+#define V_DUART_CHAN_MODE_REM_LOOP  V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_REM_LOOP)
+
+/*
+ * DUART Command Register (Table 10-5)
+ * Register: DUART_CMD_A
+ * Register: DUART_CMD_B
+ */
+
+#define M_DUART_RX_EN               _SB_MAKEMASK1(0)
+#define M_DUART_RX_DIS              _SB_MAKEMASK1(1)
+#define M_DUART_TX_EN               _SB_MAKEMASK1(2)
+#define M_DUART_TX_DIS              _SB_MAKEMASK1(3)
+
+#define S_DUART_MISC_CMD	    4
+#define M_DUART_MISC_CMD            _SB_MAKEMASK(3, S_DUART_MISC_CMD)
+#define V_DUART_MISC_CMD(x)         _SB_MAKEVALUE(x, S_DUART_MISC_CMD)
+
+#define K_DUART_MISC_CMD_NOACTION0       0
+#define K_DUART_MISC_CMD_NOACTION1       1
+#define K_DUART_MISC_CMD_RESET_RX        2
+#define K_DUART_MISC_CMD_RESET_TX        3
+#define K_DUART_MISC_CMD_NOACTION4       4
+#define K_DUART_MISC_CMD_RESET_BREAK_INT 5
+#define K_DUART_MISC_CMD_START_BREAK     6
+#define K_DUART_MISC_CMD_STOP_BREAK      7
+
+#define V_DUART_MISC_CMD_NOACTION0       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0)
+#define V_DUART_MISC_CMD_NOACTION1       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1)
+#define V_DUART_MISC_CMD_RESET_RX        V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX)
+#define V_DUART_MISC_CMD_RESET_TX        V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX)
+#define V_DUART_MISC_CMD_NOACTION4       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4)
+#define V_DUART_MISC_CMD_RESET_BREAK_INT V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_BREAK_INT)
+#define V_DUART_MISC_CMD_START_BREAK     V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
+#define V_DUART_MISC_CMD_STOP_BREAK      V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
+
+#define M_DUART_CMD_RESERVED             _SB_MAKEMASK1(7)
+
+/*
+ * DUART Status Register (Table 10-6)
+ * Register: DUART_STATUS_A
+ * Register: DUART_STATUS_B
+ * READ-ONLY
+ */
+
+#define M_DUART_RX_RDY              _SB_MAKEMASK1(0)
+#define M_DUART_RX_FFUL             _SB_MAKEMASK1(1)
+#define M_DUART_TX_RDY              _SB_MAKEMASK1(2)
+#define M_DUART_TX_EMT              _SB_MAKEMASK1(3)
+#define M_DUART_OVRUN_ERR           _SB_MAKEMASK1(4)
+#define M_DUART_PARITY_ERR          _SB_MAKEMASK1(5)
+#define M_DUART_FRM_ERR             _SB_MAKEMASK1(6)
+#define M_DUART_RCVD_BRK            _SB_MAKEMASK1(7)
+
+/*
+ * DUART Baud Rate Register (Table 10-7)
+ * Register: DUART_CLK_SEL_A
+ * Register: DUART_CLK_SEL_B
+ */
+
+#define M_DUART_CLK_COUNTER         _SB_MAKEMASK(12, 0)
+#define V_DUART_BAUD_RATE(x)        (100000000/((x)*20)-1)
+
+/*
+ * DUART Data Registers (Table 10-8 and 10-9)
+ * Register: DUART_RX_HOLD_A
+ * Register: DUART_RX_HOLD_B
+ * Register: DUART_TX_HOLD_A
+ * Register: DUART_TX_HOLD_B
+ */
+
+#define M_DUART_RX_DATA             _SB_MAKEMASK(8, 0)
+#define M_DUART_TX_DATA             _SB_MAKEMASK(8, 0)
+
+/*
+ * DUART Input Port Register (Table 10-10)
+ * Register: DUART_IN_PORT
+ */
+
+#define M_DUART_IN_PIN0_VAL         _SB_MAKEMASK1(0)
+#define M_DUART_IN_PIN1_VAL         _SB_MAKEMASK1(1)
+#define M_DUART_IN_PIN2_VAL         _SB_MAKEMASK1(2)
+#define M_DUART_IN_PIN3_VAL         _SB_MAKEMASK1(3)
+#define M_DUART_IN_PIN4_VAL         _SB_MAKEMASK1(4)
+#define M_DUART_IN_PIN5_VAL         _SB_MAKEMASK1(5)
+#define M_DUART_RIN0_PIN            _SB_MAKEMASK1(6)
+#define M_DUART_RIN1_PIN            _SB_MAKEMASK1(7)
+
+/*
+ * DUART Input Port Change Status Register (Tables 10-11, 10-12, and 10-13)
+ * Register: DUART_INPORT_CHNG
+ */
+
+#define S_DUART_IN_PIN_VAL          0
+#define M_DUART_IN_PIN_VAL          _SB_MAKEMASK(4, S_DUART_IN_PIN_VAL)
+
+#define S_DUART_IN_PIN_CHNG         4
+#define M_DUART_IN_PIN_CHNG         _SB_MAKEMASK(4, S_DUART_IN_PIN_CHNG)
+
+
+/*
+ * DUART Output port control register (Table 10-14)
+ * Register: DUART_OPCR
+ */
+
+#define M_DUART_OPCR_RESERVED0      _SB_MAKEMASK1(0)   /* must be zero */
+#define M_DUART_OPC2_SEL            _SB_MAKEMASK1(1)
+#define M_DUART_OPCR_RESERVED1      _SB_MAKEMASK1(2)   /* must be zero */
+#define M_DUART_OPC3_SEL            _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED2      _SB_MAKEMASK(4, 4)  /* must be zero */
+
+/*
+ * DUART Aux Control Register (Table 10-15)
+ * Register: DUART_AUX_CTRL
+ */
+
+#define M_DUART_IP0_CHNG_ENA        _SB_MAKEMASK1(0)
+#define M_DUART_IP1_CHNG_ENA        _SB_MAKEMASK1(1)
+#define M_DUART_IP2_CHNG_ENA        _SB_MAKEMASK1(2)
+#define M_DUART_IP3_CHNG_ENA        _SB_MAKEMASK1(3)
+#define M_DUART_ACR_RESERVED        _SB_MAKEMASK(4, 4)
+
+#define M_DUART_CTS_CHNG_ENA        _SB_MAKEMASK1(0)
+#define M_DUART_CIN_CHNG_ENA        _SB_MAKEMASK1(2)
+
+/*
+ * DUART Interrupt Status Register (Table 10-16)
+ * Register: DUART_ISR
+ */
+
+#define M_DUART_ISR_TX_A            _SB_MAKEMASK1(0)
+
+#define S_DUART_ISR_RX_A            1
+#define M_DUART_ISR_RX_A            _SB_MAKEMASK1(S_DUART_ISR_RX_A)
+#define V_DUART_ISR_RX_A(x)         _SB_MAKEVALUE(x, S_DUART_ISR_RX_A)
+#define G_DUART_ISR_RX_A(x)         _SB_GETVALUE(x, S_DUART_ISR_RX_A, M_DUART_ISR_RX_A)
+
+#define M_DUART_ISR_BRK_A           _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN_A            _SB_MAKEMASK1(3)
+#define M_DUART_ISR_ALL_A	    _SB_MAKEMASK(4, 0)
+
+#define M_DUART_ISR_TX_B            _SB_MAKEMASK1(4)
+#define M_DUART_ISR_RX_B            _SB_MAKEMASK1(5)
+#define M_DUART_ISR_BRK_B           _SB_MAKEMASK1(6)
+#define M_DUART_ISR_IN_B            _SB_MAKEMASK1(7)
+#define M_DUART_ISR_ALL_B	    _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Channel A Interrupt Status Register (Table 10-17)
+ * DUART Channel B Interrupt Status Register (Table 10-18)
+ * Register: DUART_ISR_A
+ * Register: DUART_ISR_B
+ */
+
+#define M_DUART_ISR_TX              _SB_MAKEMASK1(0)
+#define M_DUART_ISR_RX              _SB_MAKEMASK1(1)
+#define M_DUART_ISR_BRK             _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN              _SB_MAKEMASK1(3)
+#define M_DUART_ISR_ALL		    _SB_MAKEMASK(4, 0)
+#define M_DUART_ISR_RESERVED        _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Interrupt Mask Register (Table 10-19)
+ * Register: DUART_IMR
+ */
+
+#define M_DUART_IMR_TX_A            _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX_A            _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK_A           _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN_A            _SB_MAKEMASK1(3)
+#define M_DUART_IMR_ALL_A	    _SB_MAKEMASK(4, 0)
+
+#define M_DUART_IMR_TX_B            _SB_MAKEMASK1(4)
+#define M_DUART_IMR_RX_B            _SB_MAKEMASK1(5)
+#define M_DUART_IMR_BRK_B           _SB_MAKEMASK1(6)
+#define M_DUART_IMR_IN_B            _SB_MAKEMASK1(7)
+#define M_DUART_IMR_ALL_B           _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Channel A Interrupt Mask Register (Table 10-20)
+ * DUART Channel B Interrupt Mask Register (Table 10-21)
+ * Register: DUART_IMR_A
+ * Register: DUART_IMR_B
+ */
+
+#define M_DUART_IMR_TX              _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX              _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK             _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN              _SB_MAKEMASK1(3)
+#define M_DUART_IMR_ALL		    _SB_MAKEMASK(4, 0)
+#define M_DUART_IMR_RESERVED        _SB_MAKEMASK(4, 4)
+
+
+/*
+ * DUART Output Port Set Register (Table 10-22)
+ * Register: DUART_SET_OPR
+ */
+
+#define M_DUART_SET_OPR0            _SB_MAKEMASK1(0)
+#define M_DUART_SET_OPR1            _SB_MAKEMASK1(1)
+#define M_DUART_SET_OPR2            _SB_MAKEMASK1(2)
+#define M_DUART_SET_OPR3            _SB_MAKEMASK1(3)
+#define M_DUART_OPSR_RESERVED       _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Output Port Clear Register (Table 10-23)
+ * Register: DUART_CLEAR_OPR
+ */
+
+#define M_DUART_CLR_OPR0            _SB_MAKEMASK1(0)
+#define M_DUART_CLR_OPR1            _SB_MAKEMASK1(1)
+#define M_DUART_CLR_OPR2            _SB_MAKEMASK1(2)
+#define M_DUART_CLR_OPR3            _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED       _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Output Port RTS Register (Table 10-24)
+ * Register: DUART_OUT_PORT
+ */
+
+#define M_DUART_OUT_PIN_SET0        _SB_MAKEMASK1(0)
+#define M_DUART_OUT_PIN_SET1        _SB_MAKEMASK1(1)
+#define M_DUART_OUT_PIN_CLR0        _SB_MAKEMASK1(2)
+#define M_DUART_OUT_PIN_CLR1        _SB_MAKEMASK1(3)
+#define M_DUART_OPRR_RESERVED       _SB_MAKEMASK(4, 4)
+
+#define M_DUART_OUT_PIN_SET(chan) \
+    (chan == 0 ? M_DUART_OUT_PIN_SET0 : M_DUART_OUT_PIN_SET1)
+#define M_DUART_OUT_PIN_CLR(chan) \
+    (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Full Interrupt Control Register
+ */
+
+#define S_DUART_SIG_FULL           _SB_MAKE64(0)
+#define M_DUART_SIG_FULL           _SB_MAKEMASK(4, S_DUART_SIG_FULL)
+#define V_DUART_SIG_FULL(x)        _SB_MAKEVALUE(x, S_DUART_SIG_FULL)
+#define G_DUART_SIG_FULL(x)        _SB_GETVALUE(x, S_DUART_SIG_FULL, M_DUART_SIG_FULL)
+
+#define S_DUART_INT_TIME           _SB_MAKE64(4)
+#define M_DUART_INT_TIME           _SB_MAKEMASK(4, S_DUART_INT_TIME)
+#define V_DUART_INT_TIME(x)        _SB_MAKEVALUE(x, S_DUART_INT_TIME)
+#define G_DUART_INT_TIME(x)        _SB_GETVALUE(x, S_DUART_INT_TIME, M_DUART_INT_TIME)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/* ********************************************************************** */
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sentosa.h b/arch/mips/include/asm/sibyte/sentosa.h
new file mode 100644
index 0000000..64c4787
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sentosa.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_SENTOSA_H
+#define __ASM_SIBYTE_SENTOSA_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#ifdef CONFIG_SIBYTE_SENTOSA
+#define SIBYTE_BOARD_NAME "BCM91250E (Sentosa)"
+#endif
+#ifdef CONFIG_SIBYTE_RHONE
+#define SIBYTE_BOARD_NAME "BCM91125E (Rhone)"
+#endif
+
+/* Generic bus chip selects */
+#ifdef CONFIG_SIBYTE_RHONE
+#define LEDS_CS         6
+#define LEDS_PHYS       0x1d0a0000
+#endif
+
+/* GPIOs */
+#define K_GPIO_DBG_LED  0
+
+#endif /* __ASM_SIBYTE_SENTOSA_H */
diff --git a/arch/mips/include/asm/sibyte/swarm.h b/arch/mips/include/asm/sibyte/swarm.h
new file mode 100644
index 0000000..114d9d2
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/swarm.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_SWARM_H
+#define __ASM_SIBYTE_SWARM_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#ifdef CONFIG_SIBYTE_SWARM
+#define SIBYTE_BOARD_NAME "BCM91250A (SWARM)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#endif
+#ifdef CONFIG_SIBYTE_LITTLESUR
+#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "cfe0"
+#endif
+#ifdef CONFIG_SIBYTE_CRHONE
+#define SIBYTE_BOARD_NAME "BCM91125C (CRhone)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    0
+#endif
+#ifdef CONFIG_SIBYTE_CRHINE
+#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    0
+#endif
+
+/* Generic bus chip selects */
+#define LEDS_CS         3
+#define LEDS_PHYS       0x100a0000
+
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS          4
+#define IDE_PHYS        0x100b0000
+#define K_GPIO_GB_IDE   4
+#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS       6
+#define PCMCIA_PHYS     0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY  (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#endif
+
+#endif /* __ASM_SIBYTE_SWARM_H */
diff --git a/arch/mips/include/asm/sigcontext.h b/arch/mips/include/asm/sigcontext.h
new file mode 100644
index 0000000..9ce0607
--- /dev/null
+++ b/arch/mips/include/asm/sigcontext.h
@@ -0,0 +1,100 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Keep this struct definition in sync with the sigcontext fragment
+ * in arch/mips/tools/offset.c
+ */
+struct sigcontext {
+	unsigned int		sc_regmask;	/* Unused */
+	unsigned int		sc_status;	/* Unused */
+	unsigned long long	sc_pc;
+	unsigned long long	sc_regs[32];
+	unsigned long long	sc_fpregs[32];
+	unsigned int		sc_acx;		/* Was sc_ownedfp */
+	unsigned int		sc_fpc_csr;
+	unsigned int		sc_fpc_eir;	/* Unused */
+	unsigned int		sc_used_math;
+	unsigned int		sc_dsp;		/* dsp status, was sc_ssflags */
+	unsigned long long	sc_mdhi;
+	unsigned long long	sc_mdlo;
+	unsigned long		sc_hi1;		/* Was sc_cause */
+	unsigned long		sc_lo1;		/* Was sc_badvaddr */
+	unsigned long		sc_hi2;		/* Was sc_sigset[4] */
+	unsigned long		sc_lo2;
+	unsigned long		sc_hi3;
+	unsigned long		sc_lo3;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#include <linux/posix_types.h>
+/*
+ * Keep this struct definition in sync with the sigcontext fragment
+ * in arch/mips/tools/offset.c
+ *
+ * Warning: this structure illdefined with sc_badvaddr being just an unsigned
+ * int so it was changed to unsigned long in 2.6.0-test1.  This may break
+ * binary compatibility - no prisoners.
+ * DSP ASE in 2.6.12-rc4.  Turn sc_mdhi and sc_mdlo into an array of four
+ * entries, add sc_dsp and sc_reserved for padding.  No prisoners.
+ */
+struct sigcontext {
+	__u64	sc_regs[32];
+	__u64	sc_fpregs[32];
+	__u64	sc_mdhi;
+	__u64	sc_hi1;
+	__u64	sc_hi2;
+	__u64	sc_hi3;
+	__u64	sc_mdlo;
+	__u64	sc_lo1;
+	__u64	sc_lo2;
+	__u64	sc_lo3;
+	__u64	sc_pc;
+	__u32	sc_fpc_csr;
+	__u32	sc_used_math;
+	__u32	sc_dsp;
+	__u32	sc_reserved;
+};
+
+#ifdef __KERNEL__
+
+struct sigcontext32 {
+	__u32		sc_regmask;	/* Unused */
+	__u32		sc_status;	/* Unused */
+	__u64		sc_pc;
+	__u64		sc_regs[32];
+	__u64		sc_fpregs[32];
+	__u32		sc_acx;		/* Only MIPS32; was sc_ownedfp */
+	__u32		sc_fpc_csr;
+	__u32		sc_fpc_eir;	/* Unused */
+	__u32		sc_used_math;
+	__u32		sc_dsp;		/* dsp status, was sc_ssflags */
+	__u64		sc_mdhi;
+	__u64		sc_mdlo;
+	__u32		sc_hi1;		/* Was sc_cause */
+	__u32		sc_lo1;		/* Was sc_badvaddr */
+	__u32		sc_hi2;		/* Was sc_sigset[4] */
+	__u32		sc_lo2;
+	__u32		sc_hi3;
+	__u32		sc_lo3;
+};
+#endif /* __KERNEL__ */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_SIGCONTEXT_H */
diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h
new file mode 100644
index 0000000..96e28f1
--- /dev/null
+++ b/arch/mips/include/asm/siginfo.h
@@ -0,0 +1,130 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 1999, 2001, 2003 Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGINFO_H
+#define _ASM_SIGINFO_H
+
+
+#define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(long) + 2*sizeof(int))
+#undef __ARCH_SI_TRAPNO	/* exception code needs to fill this ...  */
+
+#define HAVE_ARCH_SIGINFO_T
+
+/*
+ * We duplicate the generic versions - <asm-generic/siginfo.h> is just borked
+ * by design ...
+ */
+#define HAVE_ARCH_COPY_SIGINFO
+struct siginfo;
+
+/*
+ * Careful to keep union _sifields from shifting ...
+ */
+#ifdef CONFIG_32BIT
+#define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int))
+#endif
+#ifdef CONFIG_64BIT
+#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#endif
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+	int si_signo;
+	int si_code;
+	int si_errno;
+	int __pad0[SI_MAX_SIZE / sizeof(int) - SI_PAD_SIZE - 3];
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+			sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+		} _sigchld;
+
+		/* IRIX SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			clock_t _utime;
+			int _status;		/* exit code */
+			clock_t _stime;
+		} _irix_sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void __user *_addr; /* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+			int _trapno;	/* TRAP # which caused the signal */
+#endif
+		} _sigfault;
+
+		/* SIGPOLL, SIGXFSZ (To do ...)  */
+		struct {
+			__ARCH_SI_BAND_T _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+/*
+ * si_code values
+ * Again these have been choosen to be IRIX compatible.
+ */
+#undef SI_ASYNCIO
+#undef SI_TIMER
+#undef SI_MESGQ
+#define SI_ASYNCIO	-2	/* sent by AIO completion */
+#define SI_TIMER __SI_CODE(__SI_TIMER, -3) /* sent by timer expiration */
+#define SI_MESGQ __SI_CODE(__SI_MESGQ, -4) /* sent by real time mesq state change */
+
+#ifdef __KERNEL__
+
+/*
+ * Duplicated here because of <asm-generic/siginfo.h> braindamage ...
+ */
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(*to));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif
+
+#endif /* _ASM_SIGINFO_H */
diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h
new file mode 100644
index 0000000..bee5153
--- /dev/null
+++ b/arch/mips/include/asm/signal.h
@@ -0,0 +1,139 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+#define _NSIG		128
+#define _NSIG_BPW	(sizeof(unsigned long) * 8)
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+#define SIGHUP		 1	/* Hangup (POSIX).  */
+#define SIGINT		 2	/* Interrupt (ANSI).  */
+#define SIGQUIT		 3	/* Quit (POSIX).  */
+#define SIGILL		 4	/* Illegal instruction (ANSI).  */
+#define SIGTRAP		 5	/* Trace trap (POSIX).  */
+#define SIGIOT		 6	/* IOT trap (4.2 BSD).  */
+#define SIGABRT		 SIGIOT	/* Abort (ANSI).  */
+#define SIGEMT		 7
+#define SIGFPE		 8	/* Floating-point exception (ANSI).  */
+#define SIGKILL		 9	/* Kill, unblockable (POSIX).  */
+#define SIGBUS		10	/* BUS error (4.2 BSD).  */
+#define SIGSEGV		11	/* Segmentation violation (ANSI).  */
+#define SIGSYS		12
+#define SIGPIPE		13	/* Broken pipe (POSIX).  */
+#define SIGALRM		14	/* Alarm clock (POSIX).  */
+#define SIGTERM		15	/* Termination (ANSI).  */
+#define SIGUSR1		16	/* User-defined signal 1 (POSIX).  */
+#define SIGUSR2		17	/* User-defined signal 2 (POSIX).  */
+#define SIGCHLD		18	/* Child status has changed (POSIX).  */
+#define SIGCLD		SIGCHLD	/* Same as SIGCHLD (System V).  */
+#define SIGPWR		19	/* Power failure restart (System V).  */
+#define SIGWINCH	20	/* Window size change (4.3 BSD, Sun).  */
+#define SIGURG		21	/* Urgent condition on socket (4.2 BSD).  */
+#define SIGIO		22	/* I/O now possible (4.2 BSD).  */
+#define SIGPOLL		SIGIO	/* Pollable event occurred (System V).  */
+#define SIGSTOP		23	/* Stop, unblockable (POSIX).  */
+#define SIGTSTP		24	/* Keyboard stop (POSIX).  */
+#define SIGCONT		25	/* Continue (POSIX).  */
+#define SIGTTIN		26	/* Background read from tty (POSIX).  */
+#define SIGTTOU		27	/* Background write to tty (POSIX).  */
+#define SIGVTALRM	28	/* Virtual alarm clock (4.2 BSD).  */
+#define SIGPROF		29	/* Profiling alarm clock (4.2 BSD).  */
+#define SIGXCPU		30	/* CPU limit exceeded (4.2 BSD).  */
+#define SIGXFSZ		31	/* File size limit exceeded (4.2 BSD).  */
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_ONSTACK	0x08000000
+#define SA_RESETHAND	0x80000000
+#define SA_RESTART	0x10000000
+#define SA_SIGINFO	0x00000008
+#define SA_NODEFER	0x40000000
+#define SA_NOCLDWAIT	0x00010000
+#define SA_NOCLDSTOP	0x00000001
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000	/* Only for o32 */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK     1
+#define SS_DISABLE     2
+
+#define MINSIGSTKSZ    2048
+#define SIGSTKSZ       8192
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_TRAD_SIGNALS
+#define sig_uses_siginfo(ka)	((ka)->sa.sa_flags & SA_SIGINFO)
+#else
+#define sig_uses_siginfo(ka)	(1)
+#endif
+
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK	1	/* for blocking signals */
+#define SIG_UNBLOCK	2	/* for unblocking signals */
+#define SIG_SETMASK	3	/* for setting the signal mask */
+
+#include <asm-generic/signal.h>
+
+struct sigaction {
+	unsigned int	sa_flags;
+	__sighandler_t	sa_handler;
+	sigset_t	sa_mask;
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+/* IRIX compatible stack_t  */
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	size_t ss_size;
+	int ss_flags;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#include <asm/siginfo.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/arch/mips/include/asm/sim.h b/arch/mips/include/asm/sim.h
new file mode 100644
index 0000000..0cd719f
--- /dev/null
+++ b/arch/mips/include/asm/sim.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIM_H
+#define _ASM_SIM_H
+
+
+#include <asm/asm-offsets.h>
+
+#define __str2(x) #x
+#define __str(x) __str2(x)
+
+#ifdef CONFIG_32BIT
+
+#define save_static_function(symbol)					\
+__asm__(								\
+	".text\n\t"							\
+	".globl\t" #symbol "\n\t"					\
+	".align\t2\n\t"							\
+	".type\t" #symbol ", @function\n\t"				\
+	".ent\t" #symbol ", 0\n"					\
+	#symbol":\n\t"							\
+	".frame\t$29, 0, $31\n\t"					\
+	"sw\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t"	\
+	"sw\t$17,"__str(PT_R17)"($29)\n\t"				\
+	"sw\t$18,"__str(PT_R18)"($29)\n\t"				\
+	"sw\t$19,"__str(PT_R19)"($29)\n\t"				\
+	"sw\t$20,"__str(PT_R20)"($29)\n\t"				\
+	"sw\t$21,"__str(PT_R21)"($29)\n\t"				\
+	"sw\t$22,"__str(PT_R22)"($29)\n\t"				\
+	"sw\t$23,"__str(PT_R23)"($29)\n\t"				\
+	"sw\t$30,"__str(PT_R30)"($29)\n\t"				\
+	"j\t_" #symbol "\n\t"						\
+	".end\t" #symbol "\n\t"						\
+	".size\t" #symbol",. - " #symbol)
+
+#define nabi_no_regargs
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#define save_static_function(symbol)					\
+__asm__(								\
+	".text\n\t"							\
+	".globl\t" #symbol "\n\t"					\
+	".align\t2\n\t"							\
+	".type\t" #symbol ", @function\n\t"				\
+	".ent\t" #symbol ", 0\n"					\
+	#symbol":\n\t"							\
+	".frame\t$29, 0, $31\n\t"					\
+	"sd\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t"	\
+	"sd\t$17,"__str(PT_R17)"($29)\n\t"				\
+	"sd\t$18,"__str(PT_R18)"($29)\n\t"				\
+	"sd\t$19,"__str(PT_R19)"($29)\n\t"				\
+	"sd\t$20,"__str(PT_R20)"($29)\n\t"				\
+	"sd\t$21,"__str(PT_R21)"($29)\n\t"				\
+	"sd\t$22,"__str(PT_R22)"($29)\n\t"				\
+	"sd\t$23,"__str(PT_R23)"($29)\n\t"				\
+	"sd\t$30,"__str(PT_R30)"($29)\n\t"				\
+	"j\t_" #symbol "\n\t"						\
+	".end\t" #symbol "\n\t"						\
+	".size\t" #symbol",. - " #symbol)
+
+#define nabi_no_regargs							\
+	unsigned long __dummy0,						\
+	unsigned long __dummy1,						\
+	unsigned long __dummy2,						\
+	unsigned long __dummy3,						\
+	unsigned long __dummy4,						\
+	unsigned long __dummy5,						\
+	unsigned long __dummy6,						\
+	unsigned long __dummy7,
+
+#endif /* CONFIG_64BIT */
+
+#endif /* _ASM_SIM_H */
diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h
new file mode 100644
index 0000000..43c207e7
--- /dev/null
+++ b/arch/mips/include/asm/smp-ops.h
@@ -0,0 +1,57 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com)
+ * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2002 Ralf Baechle
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ */
+#ifndef __ASM_SMP_OPS_H
+#define __ASM_SMP_OPS_H
+
+#ifdef CONFIG_SMP
+
+#include <linux/cpumask.h>
+
+struct plat_smp_ops {
+	void (*send_ipi_single)(int cpu, unsigned int action);
+	void (*send_ipi_mask)(cpumask_t mask, unsigned int action);
+	void (*init_secondary)(void);
+	void (*smp_finish)(void);
+	void (*cpus_done)(void);
+	void (*boot_secondary)(int cpu, struct task_struct *idle);
+	void (*smp_setup)(void);
+	void (*prepare_cpus)(unsigned int max_cpus);
+};
+
+extern void register_smp_ops(struct plat_smp_ops *ops);
+
+static inline void plat_smp_setup(void)
+{
+	extern struct plat_smp_ops *mp_ops;	/* private */
+
+	mp_ops->smp_setup();
+}
+
+#else /* !CONFIG_SMP */
+
+struct plat_smp_ops;
+
+static inline void plat_smp_setup(void)
+{
+	/* UP, nothing to do ...  */
+}
+
+static inline void register_smp_ops(struct plat_smp_ops *ops)
+{
+}
+
+#endif /* !CONFIG_SMP */
+
+extern struct plat_smp_ops up_smp_ops;
+extern struct plat_smp_ops cmp_smp_ops;
+extern struct plat_smp_ops vsmp_smp_ops;
+
+#endif /* __ASM_SMP_OPS_H */
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
new file mode 100644
index 0000000..0ff5b52
--- /dev/null
+++ b/arch/mips/include/asm/smp.h
@@ -0,0 +1,63 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com)
+ * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2002 Ralf Baechle
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ */
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/bitops.h>
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+
+#include <asm/atomic.h>
+#include <asm/smp-ops.h>
+
+extern int smp_num_siblings;
+extern cpumask_t cpu_sibling_map[];
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+/* Map from cpu id to sequential logical cpu number.  This will only
+   not be idempotent when cpus failed to come on-line.  */
+extern int __cpu_number_map[NR_CPUS];
+#define cpu_number_map(cpu)  __cpu_number_map[cpu]
+
+/* The reverse map from sequential logical cpu number to cpu id.  */
+extern int __cpu_logical_map[NR_CPUS];
+#define cpu_logical_map(cpu)  __cpu_logical_map[cpu]
+
+#define NO_PROC_ID	(-1)
+
+#define SMP_RESCHEDULE_YOURSELF	0x1	/* XXX braindead */
+#define SMP_CALL_FUNCTION	0x2
+
+extern cpumask_t phys_cpu_present_map;
+#define cpu_possible_map	phys_cpu_present_map
+
+extern void asmlinkage smp_bootstrap(void);
+
+/*
+ * this function sends a 'reschedule' IPI to another CPU.
+ * it goes straight through and wastes no time serializing
+ * anything. Worst case is that we lose a reschedule ...
+ */
+static inline void smp_send_reschedule(int cpu)
+{
+	extern struct plat_smp_ops *mp_ops;	/* private */
+
+	mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF);
+}
+
+extern asmlinkage void smp_call_function_interrupt(void);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#endif /* __ASM_SMP_H */
diff --git a/arch/mips/include/asm/smtc.h b/arch/mips/include/asm/smtc.h
new file mode 100644
index 0000000..ea60bf0
--- /dev/null
+++ b/arch/mips/include/asm/smtc.h
@@ -0,0 +1,71 @@
+#ifndef _ASM_SMTC_MT_H
+#define _ASM_SMTC_MT_H
+
+/*
+ * Definitions for SMTC multitasking on MIPS MT cores
+ */
+
+#include <asm/mips_mt.h>
+#include <asm/smtc_ipi.h>
+
+/*
+ * System-wide SMTC status information
+ */
+
+extern unsigned int smtc_status;
+
+#define SMTC_TLB_SHARED	0x00000001
+#define SMTC_MTC_ACTIVE	0x00000002
+
+/*
+ * TLB/ASID Management information
+ */
+
+#define MAX_SMTC_TLBS 2
+#define MAX_SMTC_ASIDS 256
+#if NR_CPUS <= 8
+typedef char asiduse;
+#else
+#if NR_CPUS <= 16
+typedef short asiduse;
+#else
+typedef long asiduse;
+#endif
+#endif
+
+extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
+
+struct mm_struct;
+struct task_struct;
+
+void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
+void self_ipi(struct smtc_ipi *);
+void smtc_flush_tlb_asid(unsigned long asid);
+extern int smtc_build_cpu_map(int startslot);
+extern void smtc_prepare_cpus(int cpus);
+extern void smtc_smp_finish(void);
+extern void smtc_boot_secondary(int cpu, struct task_struct *t);
+extern void smtc_cpus_done(void);
+
+
+/*
+ * Sharing the TLB between multiple VPEs means that the
+ * "random" index selection function is not allowed to
+ * select the current value of the Index register. To
+ * avoid additional TLB pressure, the Index registers
+ * are "parked" with an non-Valid value.
+ */
+
+#define PARKED_INDEX	((unsigned int)0x80000000)
+
+/*
+ * Define low-level interrupt mask for IPIs, if necessary.
+ * By default, use SW interrupt 1, which requires no external
+ * hardware support, but which works only for single-core
+ * MIPS MT systems.
+ */
+#ifndef MIPS_CPU_IPI_IRQ
+#define MIPS_CPU_IPI_IRQ 1
+#endif
+
+#endif /*  _ASM_SMTC_MT_H */
diff --git a/arch/mips/include/asm/smtc_ipi.h b/arch/mips/include/asm/smtc_ipi.h
new file mode 100644
index 0000000..8ce5175
--- /dev/null
+++ b/arch/mips/include/asm/smtc_ipi.h
@@ -0,0 +1,128 @@
+/*
+ * Definitions used in MIPS MT SMTC "Interprocessor Interrupt" code.
+ */
+#ifndef __ASM_SMTC_IPI_H
+#define __ASM_SMTC_IPI_H
+
+#include <linux/spinlock.h>
+
+//#define SMTC_IPI_DEBUG
+
+#ifdef SMTC_IPI_DEBUG
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#endif /* SMTC_IPI_DEBUG */
+
+/*
+ * An IPI "message"
+ */
+
+struct smtc_ipi {
+	struct smtc_ipi *flink;
+	int type;
+	void *arg;
+	int dest;
+#ifdef	SMTC_IPI_DEBUG
+	int sender;
+	long stamp;
+#endif /* SMTC_IPI_DEBUG */
+};
+
+/*
+ * Defined IPI Types
+ */
+
+#define LINUX_SMP_IPI 1
+#define SMTC_CLOCK_TICK 2
+#define IRQ_AFFINITY_IPI 3
+
+/*
+ * A queue of IPI messages
+ */
+
+struct smtc_ipi_q {
+	struct smtc_ipi *head;
+	spinlock_t lock;
+	struct smtc_ipi *tail;
+	int depth;
+};
+
+static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&q->lock, flags);
+	if (q->head == NULL)
+		q->head = q->tail = p;
+	else
+		q->tail->flink = p;
+	p->flink = NULL;
+	q->tail = p;
+	q->depth++;
+#ifdef	SMTC_IPI_DEBUG
+	p->sender = read_c0_tcbind();
+	p->stamp = read_c0_count();
+#endif /* SMTC_IPI_DEBUG */
+	spin_unlock_irqrestore(&q->lock, flags);
+}
+
+static inline struct smtc_ipi *__smtc_ipi_dq(struct smtc_ipi_q *q)
+{
+	struct smtc_ipi *p;
+
+	if (q->head == NULL)
+		p = NULL;
+	else {
+		p = q->head;
+		q->head = q->head->flink;
+		q->depth--;
+		/* Arguably unnecessary, but leaves queue cleaner */
+		if (q->head == NULL)
+			q->tail = NULL;
+	}
+
+	return p;
+}
+
+static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q)
+{
+	unsigned long flags;
+	struct smtc_ipi *p;
+
+	spin_lock_irqsave(&q->lock, flags);
+	p = __smtc_ipi_dq(q);
+	spin_unlock_irqrestore(&q->lock, flags);
+
+	return p;
+}
+
+static inline void smtc_ipi_req(struct smtc_ipi_q *q, struct smtc_ipi *p)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&q->lock, flags);
+	if (q->head == NULL) {
+		q->head = q->tail = p;
+		p->flink = NULL;
+	} else {
+		p->flink = q->head;
+		q->head = p;
+	}
+	q->depth++;
+	spin_unlock_irqrestore(&q->lock, flags);
+}
+
+static inline int smtc_ipi_qdepth(struct smtc_ipi_q *q)
+{
+	unsigned long flags;
+	int retval;
+
+	spin_lock_irqsave(&q->lock, flags);
+	retval = q->depth;
+	spin_unlock_irqrestore(&q->lock, flags);
+	return retval;
+}
+
+extern void smtc_send_ipi(int cpu, int type, unsigned int action);
+
+#endif /* __ASM_SMTC_IPI_H */
diff --git a/arch/mips/include/asm/smtc_proc.h b/arch/mips/include/asm/smtc_proc.h
new file mode 100644
index 0000000..25da651
--- /dev/null
+++ b/arch/mips/include/asm/smtc_proc.h
@@ -0,0 +1,23 @@
+/*
+ * Definitions for SMTC /proc entries
+ * Copyright(C) 2005 MIPS Technologies Inc.
+ */
+#ifndef __ASM_SMTC_PROC_H
+#define __ASM_SMTC_PROC_H
+
+/*
+ * per-"CPU" statistics
+ */
+
+struct smtc_cpu_proc {
+	unsigned long timerints;
+	unsigned long selfipis;
+};
+
+extern struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
+
+/* Count of number of recoveries of "stolen" FPU access rights on 34K */
+
+extern atomic_t smtc_fpu_recoveries;
+
+#endif /* __ASM_SMTC_PROC_H */
diff --git a/arch/mips/include/asm/smvp.h b/arch/mips/include/asm/smvp.h
new file mode 100644
index 0000000..0d0e80a
--- /dev/null
+++ b/arch/mips/include/asm/smvp.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_SMVP_H
+#define _ASM_SMVP_H
+
+/*
+ * Definitions for SMVP multitasking on MIPS MT cores
+ */
+struct task_struct;
+
+extern void smvp_smp_setup(void);
+extern void smvp_smp_finish(void);
+extern void smvp_boot_secondary(int cpu, struct task_struct *t);
+extern void smvp_init_secondary(void);
+extern void smvp_smp_finish(void);
+extern void smvp_cpus_done(void);
+extern void smvp_prepare_cpus(unsigned int max_cpus);
+
+/* This is platform specific */
+extern void smvp_send_ipi(int cpu, unsigned int action);
+#endif /*  _ASM_SMVP_H */
diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
new file mode 100644
index 0000000..fec9bdd3
--- /dev/null
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -0,0 +1,430 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_ADDRS_H
+#define _ASM_SN_ADDRS_H
+
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/addrspace.h>
+#include <asm/sn/kldir.h>
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/addrs.h>
+#elif defined(CONFIG_SGI_IP35)
+#include <asm/sn/sn1/addrs.h>
+#endif
+
+
+#ifndef __ASSEMBLY__
+
+#define PS_UINT_CAST		(unsigned long)
+#define UINT64_CAST		(unsigned long)
+
+#define HUBREG_CAST		(volatile hubreg_t *)
+
+#else /* __ASSEMBLY__ */
+
+#define PS_UINT_CAST
+#define UINT64_CAST
+#define HUBREG_CAST
+
+#endif /* __ASSEMBLY__ */
+
+
+#define NASID_GET_META(_n)	((_n) >> NASID_LOCAL_BITS)
+#ifdef CONFIG_SGI_IP27
+#define NASID_GET_LOCAL(_n)	((_n) & 0xf)
+#endif
+#define NASID_MAKE(_m, _l)	(((_m) << NASID_LOCAL_BITS) | (_l))
+
+#define NODE_ADDRSPACE_MASK	(NODE_ADDRSPACE_SIZE - 1)
+#define TO_NODE_ADDRSPACE(_pa)	(UINT64_CAST (_pa) & NODE_ADDRSPACE_MASK)
+
+#define CHANGE_ADDR_NASID(_pa, _nasid)	\
+		((UINT64_CAST(_pa) & ~NASID_MASK) | \
+		 (UINT64_CAST(_nasid) <<  NASID_SHFT))
+
+
+/*
+ * The following macros are used to index to the beginning of a specific
+ * node's address space.
+ */
+
+#define NODE_OFFSET(_n)		(UINT64_CAST (_n) << NODE_SIZE_BITS)
+
+#define NODE_CAC_BASE(_n)	(CAC_BASE   + NODE_OFFSET(_n))
+#define NODE_HSPEC_BASE(_n)	(HSPEC_BASE + NODE_OFFSET(_n))
+#define NODE_IO_BASE(_n)	(IO_BASE    + NODE_OFFSET(_n))
+#define NODE_MSPEC_BASE(_n)	(MSPEC_BASE + NODE_OFFSET(_n))
+#define NODE_UNCAC_BASE(_n)	(UNCAC_BASE + NODE_OFFSET(_n))
+
+#define TO_NODE(_n, _x)		(NODE_OFFSET(_n)     | ((_x)		   ))
+#define TO_NODE_CAC(_n, _x)	(NODE_CAC_BASE(_n)   | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_UNCAC(_n, _x)	(NODE_UNCAC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_MSPEC(_n, _x)	(NODE_MSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_HSPEC(_n, _x)	(NODE_HSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+
+
+#define RAW_NODE_SWIN_BASE(nasid, widget)				\
+	(NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS))
+
+#define WIDGETID_GET(addr)	((unsigned char)((addr >> SWIN_SIZE_BITS) & 0xff))
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define SWIN_SIZE_BITS		24
+#define SWIN_SIZE		(UINT64_CAST 1 << 24)
+#define	SWIN_SIZEMASK		(SWIN_SIZE - 1)
+#define	SWIN_WIDGET_MASK	0xF
+
+/*
+ * Convert smallwindow address to xtalk address.
+ *
+ * 'addr' can be physical or virtual address, but will be converted
+ * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
+ */
+#define	SWIN_WIDGETADDR(addr)	((addr) & SWIN_SIZEMASK)
+#define	SWIN_WIDGETNUM(addr)	(((addr)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+/*
+ * Verify if addr belongs to small window address on node with "nasid"
+ *
+ *
+ * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
+ * address
+ *
+ *
+ */
+#define	NODE_SWIN_ADDR(nasid, addr)	\
+		(((addr) >= NODE_SWIN_BASE(nasid, 0))  && \
+		 ((addr) <  (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\
+		 ))
+
+/*
+ * The following define the major position-independent aliases used
+ * in SN.
+ *	UALIAS -- 256MB in size, reads in the UALIAS result in
+ *			uncached references to the memory of the reader's node.
+ *	CPU_UALIAS -- 128kb in size, the bottom part of UALIAS is flipped
+ *			depending on which CPU does the access to provide
+ *			all CPUs with unique uncached memory at low addresses.
+ *	LBOOT  -- 256MB in size, reads in the LBOOT area result in
+ *			uncached references to the local hub's boot prom and
+ *			other directory-bus connected devices.
+ *	IALIAS -- 8MB in size, reads in the IALIAS result in uncached
+ *			references to the local hub's registers.
+ */
+
+#define UALIAS_BASE		HSPEC_BASE
+#define UALIAS_SIZE		0x10000000	/* 256 Megabytes */
+#define UALIAS_LIMIT		(UALIAS_BASE + UALIAS_SIZE)
+
+/*
+ * The bottom of ualias space is flipped depending on whether you're
+ * processor 0 or 1 within a node.
+ */
+#ifdef CONFIG_SGI_IP27
+#define UALIAS_FLIP_BASE	UALIAS_BASE
+#define UALIAS_FLIP_SIZE	0x20000
+#define UALIAS_FLIP_BIT		0x10000
+#define UALIAS_FLIP_ADDR(_x)	(cputoslice(smp_processor_id()) ? \
+				 (_x) ^ UALIAS_FLIP_BIT : (_x))
+
+#define LBOOT_BASE		(HSPEC_BASE + 0x10000000)
+#define LBOOT_SIZE		0x10000000
+#define LBOOT_LIMIT		(LBOOT_BASE + LBOOT_SIZE)
+#define LBOOT_STRIDE		0		/* IP27 has only one CPU PROM */
+
+#endif
+
+#define	HUB_REGISTER_WIDGET	1
+#define IALIAS_BASE		NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET)
+#define IALIAS_SIZE		0x800000	/* 8 Megabytes */
+#define IS_IALIAS(_a)		(((_a) >= IALIAS_BASE) &&		\
+				 ((_a) < (IALIAS_BASE + IALIAS_SIZE)))
+
+/*
+ * Macro for referring to Hub's RBOOT space
+ */
+
+#ifdef CONFIG_SGI_IP27
+#define RBOOT_SIZE		0x10000000	/* 256 Megabytes */
+#define NODE_RBOOT_BASE(_n)	(NODE_HSPEC_BASE(_n) + 0x30000000)
+#define NODE_RBOOT_LIMIT(_n)	(NODE_RBOOT_BASE(_n) + RBOOT_SIZE)
+
+#endif
+
+/*
+ * Macros for referring the Hub's back door space
+ *
+ *   These macros correctly process addresses in any node's space.
+ *   WARNING: They won't work in assembler.
+ *
+ *   BDDIR_ENTRY_LO returns the address of the low double-word of the dir
+ *                  entry corresponding to a physical (Cac or Uncac) address.
+ *   BDDIR_ENTRY_HI returns the address of the high double-word of the entry.
+ *   BDPRT_ENTRY    returns the address of the double-word protection entry
+ *                  corresponding to the page containing the physical address.
+ *   BDPRT_ENTRY_S  Stores the value into the protection entry.
+ *   BDPRT_ENTRY_L  Load the value from the protection entry.
+ *   BDECC_ENTRY    returns the address of the ECC byte corresponding to a
+ *                  double-word at a specified physical address.
+ *   BDECC_ENTRY_H  returns the address of the two ECC bytes corresponding to a
+ *                  quad-word at a specified physical address.
+ */
+#define NODE_BDOOR_BASE(_n)	(NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2))
+
+#define NODE_BDECC_BASE(_n)	(NODE_BDOOR_BASE(_n))
+#define NODE_BDDIR_BASE(_n)	(NODE_BDOOR_BASE(_n) + (NODE_ADDRSPACE_SIZE/4))
+#ifdef CONFIG_SGI_IP27
+#define BDDIR_ENTRY_LO(_pa)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE * 3 / 4 +		      \
+				  0x200)				    | \
+				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK  | \
+				 UINT64_CAST(_pa) >> 3 & 0x1f << 4)
+
+#define BDDIR_ENTRY_HI(_pa)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE * 3 / 4 +		      \
+				  0x208)				    | \
+				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK  | \
+				 UINT64_CAST(_pa) >> 3 & 0x1f << 4)
+
+#define BDPRT_ENTRY(_pa, _rgn)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE * 3 / 4)		    | \
+				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK  | \
+				 (_rgn) << 3)
+#define BDPRT_ENTRY_ADDR(_pa, _rgn) (BDPRT_ENTRY((_pa), (_rgn)))
+#define BDPRT_ENTRY_S(_pa, _rgn, _val) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))=(_val))
+#define BDPRT_ENTRY_L(_pa, _rgn)	(*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn)))
+
+#define BDECC_ENTRY(_pa)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE / 2)		    | \
+				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST(_pa) >> 2 & BDECC_UPPER_MASK  | \
+				 UINT64_CAST(_pa) >> 3 & 3)
+
+/*
+ * Macro to convert a back door directory or protection address into the
+ *   raw physical address of the associated cache line or protection page.
+ */
+#define BDADDR_IS_DIR(_ba)	((UINT64_CAST  (_ba) & 0x200) != 0)
+#define BDADDR_IS_PRT(_ba)	((UINT64_CAST  (_ba) & 0x200) == 0)
+
+#define BDDIR_TO_MEM(_ba)	(UINT64_CAST (_ba) & NASID_MASK            | \
+				 (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2  | \
+				 (UINT64_CAST(_ba) & 0x1f << 4) << 3)
+
+#define BDPRT_TO_MEM(_ba) 	(UINT64_CAST (_ba) & NASID_MASK	    | \
+				 (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2)
+
+#define BDECC_TO_MEM(_ba)	(UINT64_CAST (_ba) & NASID_MASK	    | \
+				 (UINT64_CAST(_ba) & BDECC_UPPER_MASK)<<2  | \
+				 (UINT64_CAST(_ba) & 3) << 3)
+#endif /* CONFIG_SGI_IP27 */
+
+
+/*
+ * The following macros produce the correct base virtual address for
+ * the hub registers.  The LOCAL_HUB_* macros produce the appropriate
+ * address for the local registers.  The REMOTE_HUB_* macro produce
+ * the address for the specified hub's registers.  The intent is
+ * that the appropriate PI, MD, NI, or II register would be substituted
+ * for _x.
+ */
+
+/*
+ * WARNING:
+ *	When certain Hub chip workaround are defined, it's not sufficient
+ *	to dereference the *_HUB_ADDR() macros.  You should instead use
+ *	HUB_L() and HUB_S() if you must deal with pointers to hub registers.
+ *	Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
+ *	They're always safe.
+ */
+#define LOCAL_HUB_ADDR(_x)	(HUBREG_CAST (IALIAS_BASE + (_x)))
+#define REMOTE_HUB_ADDR(_n, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
+					      0x800000 + (_x)))
+#ifdef CONFIG_SGI_IP27
+#define REMOTE_HUB_PI_ADDR(_n, _sn, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
+					      0x800000 + (_x)))
+#endif /* CONFIG_SGI_IP27 */
+
+#ifndef __ASSEMBLY__
+
+#define HUB_L(_a)			*(_a)
+#define	HUB_S(_a, _d)			*(_a) = (_d)
+
+#define LOCAL_HUB_L(_r)			HUB_L(LOCAL_HUB_ADDR(_r))
+#define LOCAL_HUB_S(_r, _d)		HUB_S(LOCAL_HUB_ADDR(_r), (_d))
+#define REMOTE_HUB_L(_n, _r)		HUB_L(REMOTE_HUB_ADDR((_n), (_r)))
+#define REMOTE_HUB_S(_n, _r, _d)	HUB_S(REMOTE_HUB_ADDR((_n), (_r)), (_d))
+#define REMOTE_HUB_PI_L(_n, _sn, _r)	HUB_L(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)))
+#define REMOTE_HUB_PI_S(_n, _sn, _r, _d) HUB_S(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)), (_d))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The following macros are used to get to a hub/bridge register, given
+ * the base of the register space.
+ */
+#define HUB_REG_PTR(_base, _off)	\
+	(HUBREG_CAST((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
+
+#define HUB_REG_PTR_L(_base, _off)	\
+	HUB_L(HUB_REG_PTR((_base), (_off)))
+
+#define HUB_REG_PTR_S(_base, _off, _data)	\
+	HUB_S(HUB_REG_PTR((_base), (_off)), (_data))
+
+/*
+ * Software structure locations -- permanently fixed
+ *    See diagram in kldir.h
+ */
+
+#define PHYS_RAMBASE		0x0
+#define K0_RAMBASE		PHYS_TO_K0(PHYS_RAMBASE)
+
+#define EX_HANDLER_OFFSET(slice) ((slice) << 16)
+#define EX_HANDLER_ADDR(nasid, slice)					\
+	PHYS_TO_K0(NODE_OFFSET(nasid) | EX_HANDLER_OFFSET(slice))
+#define EX_HANDLER_SIZE		0x0400
+
+#define EX_FRAME_OFFSET(slice)	((slice) << 16 | 0x400)
+#define EX_FRAME_ADDR(nasid, slice)					\
+	PHYS_TO_K0(NODE_OFFSET(nasid) | EX_FRAME_OFFSET(slice))
+#define EX_FRAME_SIZE		0x0c00
+
+#define ARCS_SPB_OFFSET		0x1000
+#define ARCS_SPB_ADDR(nasid)						\
+	PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET)
+#define ARCS_SPB_SIZE		0x0400
+
+#define KLDIR_OFFSET		0x2000
+#define KLDIR_ADDR(nasid)						\
+	TO_NODE_UNCAC((nasid), KLDIR_OFFSET)
+#define KLDIR_SIZE		0x0400
+
+
+/*
+ * Software structure locations -- indirected through KLDIR
+ *    See diagram in kldir.h
+ *
+ * Important:	All low memory structures must only be accessed
+ *		uncached, except for the symmon stacks.
+ */
+
+#define KLI_LAUNCH		0		/* Dir. entries */
+#define KLI_KLCONFIG		1
+#define	KLI_NMI			2
+#define KLI_GDA			3
+#define KLI_FREEMEM		4
+#define	KLI_SYMMON_STK		5
+#define KLI_PI_ERROR		6
+#define KLI_KERN_VARS		7
+#define	KLI_KERN_XP		8
+#define	KLI_KERN_PARTID		9
+
+#ifndef __ASSEMBLY__
+
+#define KLD_BASE(nasid)		((kldir_ent_t *) KLDIR_ADDR(nasid))
+#define KLD_LAUNCH(nasid)	(KLD_BASE(nasid) + KLI_LAUNCH)
+#define KLD_NMI(nasid)		(KLD_BASE(nasid) + KLI_NMI)
+#define KLD_KLCONFIG(nasid)	(KLD_BASE(nasid) + KLI_KLCONFIG)
+#define KLD_PI_ERROR(nasid)	(KLD_BASE(nasid) + KLI_PI_ERROR)
+#define KLD_GDA(nasid)		(KLD_BASE(nasid) + KLI_GDA)
+#define KLD_SYMMON_STK(nasid)	(KLD_BASE(nasid) + KLI_SYMMON_STK)
+#define KLD_FREEMEM(nasid)	(KLD_BASE(nasid) + KLI_FREEMEM)
+#define KLD_KERN_VARS(nasid)	(KLD_BASE(nasid) + KLI_KERN_VARS)
+#define	KLD_KERN_XP(nasid)	(KLD_BASE(nasid) + KLI_KERN_XP)
+#define	KLD_KERN_PARTID(nasid)	(KLD_BASE(nasid) + KLI_KERN_PARTID)
+
+#define LAUNCH_OFFSET(nasid, slice)					\
+	(KLD_LAUNCH(nasid)->offset +					\
+	 KLD_LAUNCH(nasid)->stride * (slice))
+#define LAUNCH_ADDR(nasid, slice)					\
+	TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
+#define LAUNCH_SIZE(nasid)	KLD_LAUNCH(nasid)->size
+
+#define NMI_OFFSET(nasid, slice)					\
+	(KLD_NMI(nasid)->offset +					\
+	 KLD_NMI(nasid)->stride * (slice))
+#define NMI_ADDR(nasid, slice)						\
+	TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+#define NMI_SIZE(nasid)	KLD_NMI(nasid)->size
+
+#define KLCONFIG_OFFSET(nasid)	KLD_KLCONFIG(nasid)->offset
+#define KLCONFIG_ADDR(nasid)						\
+	TO_NODE_UNCAC((nasid), KLCONFIG_OFFSET(nasid))
+#define KLCONFIG_SIZE(nasid)	KLD_KLCONFIG(nasid)->size
+
+#define GDA_ADDR(nasid)		KLD_GDA(nasid)->pointer
+#define GDA_SIZE(nasid)		KLD_GDA(nasid)->size
+
+#define SYMMON_STK_OFFSET(nasid, slice)					\
+	(KLD_SYMMON_STK(nasid)->offset +				\
+	 KLD_SYMMON_STK(nasid)->stride * (slice))
+#define SYMMON_STK_STRIDE(nasid)	KLD_SYMMON_STK(nasid)->stride
+
+#define SYMMON_STK_ADDR(nasid, slice)					\
+	TO_NODE_CAC((nasid), SYMMON_STK_OFFSET(nasid, slice))
+
+#define SYMMON_STK_SIZE(nasid)	KLD_SYMMON_STK(nasid)->stride
+
+#define SYMMON_STK_END(nasid)	(SYMMON_STK_ADDR(nasid, 0) + KLD_SYMMON_STK(nasid)->size)
+
+/* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a
+ * relocatable program
+ */
+#define	UNIX_DEBUG_LOADADDR	0x300000
+#define	SYMMON_LOADADDR(nasid)						\
+	TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000))
+
+#define FREEMEM_OFFSET(nasid)	KLD_FREEMEM(nasid)->offset
+#define FREEMEM_ADDR(nasid)	SYMMON_STK_END(nasid)
+/*
+ * XXX
+ * Fix this. FREEMEM_ADDR should be aware of if symmon is loaded.
+ * Also, it should take into account what prom thinks to be a safe
+ * address
+	PHYS_TO_K0(NODE_OFFSET(nasid) + FREEMEM_OFFSET(nasid))
+ */
+#define FREEMEM_SIZE(nasid)	KLD_FREEMEM(nasid)->size
+
+#define PI_ERROR_OFFSET(nasid)	KLD_PI_ERROR(nasid)->offset
+#define PI_ERROR_ADDR(nasid)						\
+	TO_NODE_UNCAC((nasid), PI_ERROR_OFFSET(nasid))
+#define PI_ERROR_SIZE(nasid)	KLD_PI_ERROR(nasid)->size
+
+#define NODE_OFFSET_TO_K0(_nasid, _off)					\
+	PHYS_TO_K0((NODE_OFFSET(_nasid) + (_off)) | CAC_BASE)
+#define NODE_OFFSET_TO_K1(_nasid, _off)					\
+	TO_UNCAC((NODE_OFFSET(_nasid) + (_off)) | UNCAC_BASE)
+#define K0_TO_NODE_OFFSET(_k0addr)					\
+	((__psunsigned_t)(_k0addr) & NODE_ADDRSPACE_MASK)
+
+#define KERN_VARS_ADDR(nasid)	KLD_KERN_VARS(nasid)->pointer
+#define KERN_VARS_SIZE(nasid)	KLD_KERN_VARS(nasid)->size
+
+#define	KERN_XP_ADDR(nasid)	KLD_KERN_XP(nasid)->pointer
+#define	KERN_XP_SIZE(nasid)	KLD_KERN_XP(nasid)->size
+
+#define GPDA_ADDR(nasid)	TO_NODE_CAC(nasid, GPDA_OFFSET)
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* _ASM_SN_ADDRS_H */
diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h
new file mode 100644
index 0000000..ac4ea85
--- /dev/null
+++ b/arch/mips/include/asm/sn/agent.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file has definitions for the hub and snac interfaces.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silcon Graphics, Inc.
+ * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SGI_SN_AGENT_H
+#define _ASM_SGI_SN_AGENT_H
+
+#include <linux/topology.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/arch.h>
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/hub.h>
+#elif defined(CONFIG_SGI_IP35)
+#include <asm/sn/sn1/hub.h>
+#endif	/* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
+
+/*
+ * NIC register macros
+ */
+
+#if defined(CONFIG_SGI_IP27)
+#define HUB_NIC_ADDR(_cpuid) 						   \
+	REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)),       \
+		MD_MLAN_CTL)
+#endif
+
+#define SET_HUB_NIC(_my_cpuid, _val) 				  	   \
+	(HUB_S(HUB_NIC_ADDR(_my_cpuid), (_val)))
+
+#define SET_MY_HUB_NIC(_v) 					           \
+	SET_HUB_NIC(cpuid(), (_v))
+
+#define GET_HUB_NIC(_my_cpuid) 						   \
+	(HUB_L(HUB_NIC_ADDR(_my_cpuid)))
+
+#define GET_MY_HUB_NIC() 						   \
+	GET_HUB_NIC(cpuid())
+
+#endif /* _ASM_SGI_SN_AGENT_H */
diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h
new file mode 100644
index 0000000..bd75945
--- /dev/null
+++ b/arch/mips/include/asm/sn/arch.h
@@ -0,0 +1,64 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI specific setup.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SN_ARCH_H
+#define _ASM_SN_ARCH_H
+
+#include <linux/types.h>
+#include <asm/sn/types.h>
+#ifdef CONFIG_SGI_IP27
+#include <asm/sn/sn0/arch.h>
+#endif
+
+typedef u64	hubreg_t;
+
+#define cputonasid(cpu)		(sn_cpu_info[(cpu)].p_nasid)
+#define cputoslice(cpu)		(sn_cpu_info[(cpu)].p_slice)
+#define makespnum(_nasid, _slice)					\
+		(((_nasid) << CPUS_PER_NODE_SHFT) | (_slice))
+
+#define INVALID_NASID		(nasid_t)-1
+#define INVALID_CNODEID		(cnodeid_t)-1
+#define INVALID_PNODEID		(pnodeid_t)-1
+#define INVALID_MODULE		(moduleid_t)-1
+#define	INVALID_PARTID		(partid_t)-1
+
+extern nasid_t get_nasid(void);
+extern cnodeid_t get_cpu_cnode(cpuid_t);
+extern int get_cpu_slice(cpuid_t);
+
+/*
+ * NO ONE should access these arrays directly.  The only reason we refer to
+ * them here is to avoid the procedure call that would be required in the
+ * macros below.  (Really want private data members here :-)
+ */
+extern cnodeid_t nasid_to_compact_node[MAX_NASIDS];
+extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES];
+
+/*
+ * These macros are used by various parts of the kernel to convert
+ * between the three different kinds of node numbering.   At least some
+ * of them may change to procedure calls in the future, but the macros
+ * will continue to work.  Don't use the arrays above directly.
+ */
+
+#define	NASID_TO_REGION(nnode)	      	\
+    ((nnode) >> \
+     (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT))
+
+extern cnodeid_t nasid_to_compact_node[MAX_NASIDS];
+extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES];
+extern cnodeid_t cpuid_to_compact_node[MAXCPUS];
+
+#define NASID_TO_COMPACT_NODEID(nnode)	(nasid_to_compact_node[nnode])
+#define COMPACT_TO_NASID_NODEID(cnode)	(compact_to_nasid_node[cnode])
+#define CPUID_TO_COMPACT_NODEID(cpu)	(cpuid_to_compact_node[(cpu)])
+
+#endif /* _ASM_SN_ARCH_H */
diff --git a/arch/mips/include/asm/sn/fru.h b/arch/mips/include/asm/sn/fru.h
new file mode 100644
index 0000000..b3e3606
--- /dev/null
+++ b/arch/mips/include/asm/sn/fru.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/sn0_fru.h>
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999, 2006 Ralf Baechle (ralf@linux-mips)
+ */
+#ifndef __ASM_SN_FRU_H
+#define __ASM_SN_FRU_H
+
+#define MAX_DIMMS			8	 /* max # of dimm banks */
+#define MAX_PCIDEV			8	 /* max # of pci devices on a pci bus */
+
+typedef unsigned char confidence_t;
+
+typedef struct kf_mem_s {
+	confidence_t km_confidence; /* confidence level that the memory is bad
+				     * is this necessary ?
+				     */
+	confidence_t km_dimm[MAX_DIMMS];
+	                            /* confidence level that dimm[i] is bad
+				     *I think this is the right number
+				     */
+
+} kf_mem_t;
+
+typedef struct kf_cpu_s {
+	confidence_t  	kc_confidence; /* confidence level that cpu is bad */
+	confidence_t  	kc_icache; /* confidence level that instr. cache is bad */
+	confidence_t  	kc_dcache; /* confidence level that data   cache is bad */
+	confidence_t  	kc_scache; /* confidence level that sec.   cache is bad */
+	confidence_t	kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */
+} kf_cpu_t;
+
+typedef struct kf_pci_bus_s {
+	confidence_t	kpb_belief;	/* confidence level  that the  pci bus is bad */
+	confidence_t	kpb_pcidev_belief[MAX_PCIDEV];
+	                                /* confidence level that the pci dev is bad */
+} kf_pci_bus_t;
+
+#endif /* __ASM_SN_FRU_H */
diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h
new file mode 100644
index 0000000..9cb6ff7
--- /dev/null
+++ b/arch/mips/include/asm/sn/gda.h
@@ -0,0 +1,107 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/gda.h>.
+ *
+ * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc.
+ *
+ * gda.h -- Contains the data structure for the global data area,
+ * 	The GDA contains information communicated between the
+ *	PROM, SYMMON, and the kernel.
+ */
+#ifndef _ASM_SN_GDA_H
+#define _ASM_SN_GDA_H
+
+#include <asm/sn/addrs.h>
+
+#define GDA_MAGIC	0x58464552
+
+/*
+ * GDA Version History
+ *
+ * Version #	| Change
+ * -------------+-------------------------------------------------------
+ * 	1	| Initial SN0 version
+ * 	2	| Prom sets g_partid field to the partition number. 0 IS
+ *		| a valid partition #.
+ */
+
+#define GDA_VERSION	2	/* Current GDA version # */
+
+#define G_MAGICOFF	0
+#define G_VERSIONOFF	4
+#define G_PROMOPOFF	6
+#define G_MASTEROFF	8
+#define G_VDSOFF	12
+#define G_HKDNORMOFF	16
+#define G_HKDUTLBOFF	24
+#define G_HKDXUTLBOFF	32
+#define G_PARTIDOFF	40
+#define G_TABLEOFF	128
+
+#ifndef __ASSEMBLY__
+
+typedef struct gda {
+	u32	g_magic;	/* GDA magic number */
+	u16	g_version;	/* Version of this structure */
+	u16	g_masterid;	/* The NASID:CPUNUM of the master cpu */
+	u32	g_promop;	/* Passes requests from the kernel to prom */
+	u32	g_vds;		/* Store the virtual dipswitches here */
+	void	**g_hooked_norm;/* ptr to pda loc for norm hndlr */
+	void	**g_hooked_utlb;/* ptr to pda loc for utlb hndlr */
+	void	**g_hooked_xtlb;/* ptr to pda loc for xtlb hndlr */
+	int	g_partid;	/* partition id */
+	int	g_symmax;	/* Max symbols in name table. */
+	void	*g_dbstab;	/* Address of idbg symbol table */
+	char	*g_nametab;	/* Address of idbg name table */
+	void	*g_ktext_repmask;
+				/* Pointer to a mask of nodes with copies
+				 * of the kernel. */
+	char	g_padding[56];	/* pad out to 128 bytes */
+	nasid_t	g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node,
+						  * indexed by cnodeid.
+						  */
+} gda_t;
+
+#define GDA ((gda_t*) GDA_ADDR(get_nasid()))
+
+#endif /* !__ASSEMBLY__ */
+/*
+ * Define:	PART_GDA_VERSION
+ * Purpose:	Define the minimum version of the GDA required, lower
+ *		revisions assume GDA is NOT set up, and read partition
+ *		information from the board info.
+ */
+#define	PART_GDA_VERSION	2
+
+/*
+ * The following requests can be sent to the PROM during startup.
+ */
+
+#define PROMOP_MAGIC		0x0ead0000
+#define PROMOP_MAGIC_MASK	0x0fff0000
+
+#define PROMOP_BIST_SHIFT       11
+#define PROMOP_BIST_MASK        (0x3 << 11)
+
+#define PROMOP_REG		PI_ERR_STACK_ADDR_A
+
+#define PROMOP_INVALID		(PROMOP_MAGIC | 0x00)
+#define PROMOP_HALT             (PROMOP_MAGIC | 0x10)
+#define PROMOP_POWERDOWN        (PROMOP_MAGIC | 0x20)
+#define PROMOP_RESTART          (PROMOP_MAGIC | 0x30)
+#define PROMOP_REBOOT           (PROMOP_MAGIC | 0x40)
+#define PROMOP_IMODE            (PROMOP_MAGIC | 0x50)
+
+#define PROMOP_CMD_MASK		0x00f0
+#define PROMOP_OPTIONS_MASK	0xfff0
+
+#define PROMOP_SKIP_DIAGS	0x0100		/* don't bother running diags */
+#define PROMOP_SKIP_MEMINIT	0x0200		/* don't bother initing memory */
+#define PROMOP_SKIP_DEVINIT	0x0400		/* don't bother initing devices */
+#define PROMOP_BIST1		0x0800		/* keep track of which BIST ran */
+#define PROMOP_BIST2		0x1000		/* keep track of which BIST ran */
+
+#endif /* _ASM_SN_GDA_H */
diff --git a/arch/mips/include/asm/sn/hub.h b/arch/mips/include/asm/sn/hub.h
new file mode 100644
index 0000000..1992d92
--- /dev/null
+++ b/arch/mips/include/asm/sn/hub.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_SN_HUB_H
+#define __ASM_SN_HUB_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/sn/types.h>
+#include <asm/sn/io.h>
+#include <asm/sn/klkernvars.h>
+#include <asm/xtalk/xtalk.h>
+
+/* ip27-hubio.c */
+extern unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget,
+			  unsigned long xtalk_addr, size_t size);
+extern void hub_pio_init(cnodeid_t cnode);
+
+#endif /* __ASM_SN_HUB_H */
diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h
new file mode 100644
index 0000000..6718b64
--- /dev/null
+++ b/arch/mips/include/asm/sn/intr.h
@@ -0,0 +1,129 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_INTR_H
+#define __ASM_SN_INTR_H
+
+/* Number of interrupt levels associated with each interrupt register. */
+#define N_INTPEND_BITS		64
+
+#define INT_PEND0_BASELVL	0
+#define INT_PEND1_BASELVL	64
+
+#define	N_INTPENDJUNK_BITS	8
+#define	INTPENDJUNK_CLRBIT	0x80
+
+/*
+ * Macros to manipulate the interrupt register on the calling hub chip.
+ */
+
+#define LOCAL_HUB_SEND_INTR(level)				\
+	LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level)))
+#define REMOTE_HUB_SEND_INTR(hub, level)			\
+	REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level)))
+
+/*
+ * When clearing the interrupt, make sure this clear does make it
+ * to the hub. Otherwise we could end up losing interrupts.
+ * We do an uncached load of the int_pend0 register to ensure this.
+ */
+
+#define LOCAL_HUB_CLR_INTR(level)	  			\
+do {								\
+	LOCAL_HUB_S(PI_INT_PEND_MOD, (level));			\
+	LOCAL_HUB_L(PI_INT_PEND0);				\
+} while (0);
+
+#define REMOTE_HUB_CLR_INTR(hub, level)				\
+do {								\
+	nasid_t  __hub = (hub);					\
+								\
+	REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level));		\
+	REMOTE_HUB_L(__hub, PI_INT_PEND0);			\
+} while (0);
+
+/*
+ * Hard-coded interrupt levels:
+ */
+
+/*
+ *	L0 = SW1
+ *	L1 = SW2
+ *	L2 = INT_PEND0
+ *	L3 = INT_PEND1
+ *	L4 = RTC
+ *	L5 = Profiling Timer
+ *	L6 = Hub Errors
+ *	L7 = Count/Compare (T5 counters)
+ */
+
+
+/*
+ * INT_PEND0 hard-coded bits.
+ */
+
+/*
+ * INT_PEND0 bits determined by hardware:
+ */
+#define RESERVED_INTR		 0	/* What is this bit? */
+#define GFX_INTR_A		 1
+#define GFX_INTR_B		 2
+#define PG_MIG_INTR		 3
+#define UART_INTR		 4
+#define CC_PEND_A		 5
+#define CC_PEND_B		 6
+
+/*
+ * INT_PEND0 used by the kernel for itself ...
+ */
+#define CPU_RESCHED_A_IRQ	 7
+#define CPU_RESCHED_B_IRQ	 8
+#define CPU_CALL_A_IRQ		 9
+#define CPU_CALL_B_IRQ		10
+#define MSC_MESG_INTR		11
+#define BASE_PCI_IRQ		12
+
+/*
+ * INT_PEND0 again, bits determined by hardware / hardcoded:
+ */
+#define SDISK_INTR		63	/* SABLE name */
+#define IP_PEND0_6_63		63	/* What is this bit? */
+
+/*
+ * INT_PEND1 hard-coded bits:
+ */
+#define NI_BRDCAST_ERR_A	39
+#define NI_BRDCAST_ERR_B	40
+
+#define LLP_PFAIL_INTR_A	41	/* see ml/SN/SN0/sysctlr.c */
+#define LLP_PFAIL_INTR_B	42
+
+#define	TLB_INTR_A		43	/* used for tlb flush random */
+#define	TLB_INTR_B		44
+
+#define IP27_INTR_0		45	/* Reserved for PROM use */
+#define IP27_INTR_1		46	/* do not use in Kernel */
+#define IP27_INTR_2		47
+#define IP27_INTR_3		48
+#define IP27_INTR_4		49
+#define IP27_INTR_5		50
+#define IP27_INTR_6		51
+#define IP27_INTR_7		52
+
+#define BRIDGE_ERROR_INTR	53	/* Setup by PROM to catch	*/
+					/* Bridge Errors */
+#define	DEBUG_INTR_A		54
+#define	DEBUG_INTR_B		55	/* Used by symmon to stop all cpus */
+#define IO_ERROR_INTR		57	/* Setup by PROM */
+#define CLK_ERR_INTR		58
+#define COR_ERR_INTR_A		59
+#define COR_ERR_INTR_B		60
+#define MD_COR_ERR_INTR		61
+#define NI_ERROR_INTR		62
+#define MSC_PANIC_INTR		63
+
+#endif /* __ASM_SN_INTR_H */
diff --git a/arch/mips/include/asm/sn/io.h b/arch/mips/include/asm/sn/io.h
new file mode 100644
index 0000000..24c6775
--- /dev/null
+++ b/arch/mips/include/asm/sn/io.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 2003 Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SN_IO_H
+#define _ASM_SN_IO_H
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/hubio.h>
+#endif
+
+
+#define IIO_ITTE_BASE		0x400160 /* base of translation table entries */
+#define IIO_ITTE(bigwin)	(IIO_ITTE_BASE + 8*(bigwin))
+
+#define IIO_ITTE_OFFSET_BITS	5	/* size of offset field */
+#define IIO_ITTE_OFFSET_MASK	((1<<IIO_ITTE_OFFSET_BITS)-1)
+#define IIO_ITTE_OFFSET_SHIFT	0
+
+#define IIO_ITTE_WIDGET_BITS	4	/* size of widget field */
+#define IIO_ITTE_WIDGET_MASK	((1<<IIO_ITTE_WIDGET_BITS)-1)
+#define IIO_ITTE_WIDGET_SHIFT	8
+
+#define IIO_ITTE_IOSP		1	/* I/O Space bit */
+#define IIO_ITTE_IOSP_MASK	1
+#define IIO_ITTE_IOSP_SHIFT	12
+#define HUB_PIO_MAP_TO_MEM	0
+#define HUB_PIO_MAP_TO_IO	1
+
+#define IIO_ITTE_INVALID_WIDGET	3	/* an invalid widget  */
+
+#define IIO_ITTE_PUT(nasid, bigwin, io_or_mem, widget, addr) \
+	REMOTE_HUB_S((nasid), IIO_ITTE(bigwin), \
+		(((((addr) >> BWIN_SIZE_BITS) & \
+		   IIO_ITTE_OFFSET_MASK) << IIO_ITTE_OFFSET_SHIFT) | \
+		(io_or_mem << IIO_ITTE_IOSP_SHIFT) | \
+		(((widget) & IIO_ITTE_WIDGET_MASK) << IIO_ITTE_WIDGET_SHIFT)))
+
+#define IIO_ITTE_DISABLE(nasid, bigwin) \
+	IIO_ITTE_PUT((nasid), HUB_PIO_MAP_TO_MEM, \
+		     (bigwin), IIO_ITTE_INVALID_WIDGET, 0)
+
+#define IIO_ITTE_GET(nasid, bigwin) REMOTE_HUB_ADDR((nasid), IIO_ITTE(bigwin))
+
+/*
+ * Macro which takes the widget number, and returns the
+ * IO PRB address of that widget.
+ * value _x is expected to be a widget number in the range
+ * 0, 8 - 0xF
+ */
+#define	IIO_IOPRB(_x)	(IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
+			(_x) : \
+			(_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
+
+#endif /* _ASM_SN_IO_H */
diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h
new file mode 100644
index 0000000..0996777
--- /dev/null
+++ b/arch/mips/include/asm/sn/ioc3.h
@@ -0,0 +1,663 @@
+/*
+ * Copyright (C) 1999, 2000 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _IOC3_H
+#define _IOC3_H
+
+#include <linux/types.h>
+
+/* SUPERIO uart register map */
+typedef volatile struct ioc3_uartregs {
+	union {
+		volatile u8	rbr;	/* read only, DLAB == 0 */
+		volatile u8	thr;	/* write only, DLAB == 0 */
+		volatile u8	dll;	/* DLAB == 1 */
+	} u1;
+	union {
+		volatile u8	ier;	/* DLAB == 0 */
+		volatile u8	dlm;	/* DLAB == 1 */
+	} u2;
+	union {
+		volatile u8	iir;	/* read only */
+		volatile u8	fcr;	/* write only */
+	} u3;
+	volatile u8	    iu_lcr;
+	volatile u8	    iu_mcr;
+	volatile u8	    iu_lsr;
+	volatile u8	    iu_msr;
+	volatile u8	    iu_scr;
+} ioc3_uregs_t;
+
+#define iu_rbr u1.rbr
+#define iu_thr u1.thr
+#define iu_dll u1.dll
+#define iu_ier u2.ier
+#define iu_dlm u2.dlm
+#define iu_iir u3.iir
+#define iu_fcr u3.fcr
+
+struct ioc3_sioregs {
+	volatile u8		fill[0x141];	/* starts at 0x141 */
+
+	volatile u8		uartc;
+	volatile u8		kbdcg;
+
+	volatile u8		fill0[0x150 - 0x142 - 1];
+
+	volatile u8		pp_data;
+	volatile u8		pp_dsr;
+	volatile u8		pp_dcr;
+
+	volatile u8		fill1[0x158 - 0x152 - 1];
+
+	volatile u8		pp_fifa;
+	volatile u8		pp_cfgb;
+	volatile u8		pp_ecr;
+
+	volatile u8		fill2[0x168 - 0x15a - 1];
+
+	volatile u8		rtcad;
+	volatile u8		rtcdat;
+
+	volatile u8		fill3[0x170 - 0x169 - 1];
+
+	struct ioc3_uartregs    uartb;	/* 0x20170  */
+	struct ioc3_uartregs    uarta;	/* 0x20178  */
+};
+
+/* Register layout of IOC3 in configuration space.  */
+struct ioc3 {
+	volatile u32	pad0[7];	/* 0x00000  */
+	volatile u32	sio_ir;		/* 0x0001c  */
+	volatile u32	sio_ies;	/* 0x00020  */
+	volatile u32	sio_iec;	/* 0x00024  */
+	volatile u32	sio_cr;		/* 0x00028  */
+	volatile u32	int_out;	/* 0x0002c  */
+	volatile u32	mcr;		/* 0x00030  */
+
+	/* General Purpose I/O registers  */
+	volatile u32	gpcr_s;		/* 0x00034  */
+	volatile u32	gpcr_c;		/* 0x00038  */
+	volatile u32	gpdr;		/* 0x0003c  */
+	volatile u32	gppr_0;		/* 0x00040  */
+	volatile u32	gppr_1;		/* 0x00044  */
+	volatile u32	gppr_2;		/* 0x00048  */
+	volatile u32	gppr_3;		/* 0x0004c  */
+	volatile u32	gppr_4;		/* 0x00050  */
+	volatile u32	gppr_5;		/* 0x00054  */
+	volatile u32	gppr_6;		/* 0x00058  */
+	volatile u32	gppr_7;		/* 0x0005c  */
+	volatile u32	gppr_8;		/* 0x00060  */
+	volatile u32	gppr_9;		/* 0x00064  */
+	volatile u32	gppr_10;	/* 0x00068  */
+	volatile u32	gppr_11;	/* 0x0006c  */
+	volatile u32	gppr_12;	/* 0x00070  */
+	volatile u32	gppr_13;	/* 0x00074  */
+	volatile u32	gppr_14;	/* 0x00078  */
+	volatile u32	gppr_15;	/* 0x0007c  */
+
+	/* Parallel Port Registers  */
+	volatile u32	ppbr_h_a;	/* 0x00080  */
+	volatile u32	ppbr_l_a;	/* 0x00084  */
+	volatile u32	ppcr_a;		/* 0x00088  */
+	volatile u32	ppcr;		/* 0x0008c  */
+	volatile u32	ppbr_h_b;	/* 0x00090  */
+	volatile u32	ppbr_l_b;	/* 0x00094  */
+	volatile u32	ppcr_b;		/* 0x00098  */
+
+	/* Keyboard and Mouse Registers  */
+	volatile u32	km_csr;		/* 0x0009c  */
+	volatile u32	k_rd;		/* 0x000a0  */
+	volatile u32	m_rd;		/* 0x000a4  */
+	volatile u32	k_wd;		/* 0x000a8  */
+	volatile u32	m_wd;		/* 0x000ac  */
+
+	/* Serial Port Registers  */
+	volatile u32	sbbr_h;		/* 0x000b0  */
+	volatile u32	sbbr_l;		/* 0x000b4  */
+	volatile u32	sscr_a;		/* 0x000b8  */
+	volatile u32	stpir_a;	/* 0x000bc  */
+	volatile u32	stcir_a;	/* 0x000c0  */
+	volatile u32	srpir_a;	/* 0x000c4  */
+	volatile u32	srcir_a;	/* 0x000c8  */
+	volatile u32	srtr_a;		/* 0x000cc  */
+	volatile u32	shadow_a;	/* 0x000d0  */
+	volatile u32	sscr_b;		/* 0x000d4  */
+	volatile u32	stpir_b;	/* 0x000d8  */
+	volatile u32	stcir_b;	/* 0x000dc  */
+	volatile u32	srpir_b;	/* 0x000e0  */
+	volatile u32	srcir_b;	/* 0x000e4  */
+	volatile u32	srtr_b;		/* 0x000e8  */
+	volatile u32	shadow_b;	/* 0x000ec  */
+
+	/* Ethernet Registers  */
+	volatile u32	emcr;		/* 0x000f0  */
+	volatile u32	eisr;		/* 0x000f4  */
+	volatile u32	eier;		/* 0x000f8  */
+	volatile u32	ercsr;		/* 0x000fc  */
+	volatile u32	erbr_h;		/* 0x00100  */
+	volatile u32	erbr_l;		/* 0x00104  */
+	volatile u32	erbar;		/* 0x00108  */
+	volatile u32	ercir;		/* 0x0010c  */
+	volatile u32	erpir;		/* 0x00110  */
+	volatile u32	ertr;		/* 0x00114  */
+	volatile u32	etcsr;		/* 0x00118  */
+	volatile u32	ersr;		/* 0x0011c  */
+	volatile u32	etcdc;		/* 0x00120  */
+	volatile u32	ebir;		/* 0x00124  */
+	volatile u32	etbr_h;		/* 0x00128  */
+	volatile u32	etbr_l;		/* 0x0012c  */
+	volatile u32	etcir;		/* 0x00130  */
+	volatile u32	etpir;		/* 0x00134  */
+	volatile u32	emar_h;		/* 0x00138  */
+	volatile u32	emar_l;		/* 0x0013c  */
+	volatile u32	ehar_h;		/* 0x00140  */
+	volatile u32	ehar_l;		/* 0x00144  */
+	volatile u32	micr;		/* 0x00148  */
+	volatile u32	midr_r;		/* 0x0014c  */
+	volatile u32	midr_w;		/* 0x00150  */
+	volatile u32	pad1[(0x20000 - 0x00154) / 4];
+
+	/* SuperIO Registers  XXX */
+	struct ioc3_sioregs	sregs;	/* 0x20000 */
+	volatile u32	pad2[(0x40000 - 0x20180) / 4];
+
+	/* SSRAM Diagnostic Access */
+	volatile u32	ssram[(0x80000 - 0x40000) / 4];
+
+	/* Bytebus device offsets
+	   0x80000 -   Access to the generic devices selected with   DEV0
+	   0x9FFFF     bytebus DEV_SEL_0
+	   0xA0000 -   Access to the generic devices selected with   DEV1
+	   0xBFFFF     bytebus DEV_SEL_1
+	   0xC0000 -   Access to the generic devices selected with   DEV2
+	   0xDFFFF     bytebus DEV_SEL_2
+	   0xE0000 -   Access to the generic devices selected with   DEV3
+	   0xFFFFF     bytebus DEV_SEL_3  */
+};
+
+/*
+ * Ethernet RX Buffer
+ */
+struct ioc3_erxbuf {
+	u32	w0;			/* first word (valid,bcnt,cksum) */
+	u32	err;			/* second word various errors */
+	/* next comes n bytes of padding */
+	/* then the received ethernet frame itself */
+};
+
+#define ERXBUF_IPCKSUM_MASK	0x0000ffff
+#define ERXBUF_BYTECNT_MASK	0x07ff0000
+#define ERXBUF_BYTECNT_SHIFT	16
+#define ERXBUF_V		0x80000000
+
+#define ERXBUF_CRCERR		0x00000001	/* aka RSV15 */
+#define ERXBUF_FRAMERR		0x00000002	/* aka RSV14 */
+#define ERXBUF_CODERR		0x00000004	/* aka RSV13 */
+#define ERXBUF_INVPREAMB	0x00000008	/* aka RSV18 */
+#define ERXBUF_LOLEN		0x00007000	/* aka RSV2_0 */
+#define ERXBUF_HILEN		0x03ff0000	/* aka RSV12_3 */
+#define ERXBUF_MULTICAST	0x04000000	/* aka RSV16 */
+#define ERXBUF_BROADCAST	0x08000000	/* aka RSV17 */
+#define ERXBUF_LONGEVENT	0x10000000	/* aka RSV19 */
+#define ERXBUF_BADPKT		0x20000000	/* aka RSV20 */
+#define ERXBUF_GOODPKT		0x40000000	/* aka RSV21 */
+#define ERXBUF_CARRIER		0x80000000	/* aka RSV22 */
+
+/*
+ * Ethernet TX Descriptor
+ */
+#define ETXD_DATALEN    104
+struct ioc3_etxd {
+	u32	cmd;				/* command field */
+	u32	bufcnt;				/* buffer counts field */
+	u64	p1;				/* buffer pointer 1 */
+	u64	p2;				/* buffer pointer 2 */
+	u8	data[ETXD_DATALEN];		/* opt. tx data */
+};
+
+#define ETXD_BYTECNT_MASK	0x000007ff	/* total byte count */
+#define ETXD_INTWHENDONE	0x00001000	/* intr when done */
+#define ETXD_D0V		0x00010000	/* data 0 valid */
+#define ETXD_B1V		0x00020000	/* buf 1 valid */
+#define ETXD_B2V		0x00040000	/* buf 2 valid */
+#define ETXD_DOCHECKSUM		0x00080000	/* insert ip cksum */
+#define ETXD_CHKOFF_MASK	0x07f00000	/* cksum byte offset */
+#define ETXD_CHKOFF_SHIFT	20
+
+#define ETXD_D0CNT_MASK		0x0000007f
+#define ETXD_B1CNT_MASK		0x0007ff00
+#define ETXD_B1CNT_SHIFT	8
+#define ETXD_B2CNT_MASK		0x7ff00000
+#define ETXD_B2CNT_SHIFT	20
+
+/*
+ * Bytebus device space
+ */
+#define IOC3_BYTEBUS_DEV0	0x80000L
+#define IOC3_BYTEBUS_DEV1	0xa0000L
+#define IOC3_BYTEBUS_DEV2	0xc0000L
+#define IOC3_BYTEBUS_DEV3	0xe0000L
+
+/* ------------------------------------------------------------------------- */
+
+/* Superio Registers (PIO Access) */
+#define IOC3_SIO_BASE		0x20000
+#define IOC3_SIO_UARTC		(IOC3_SIO_BASE+0x141)	/* UART Config */
+#define IOC3_SIO_KBDCG		(IOC3_SIO_BASE+0x142)	/* KBD Config */
+#define IOC3_SIO_PP_BASE	(IOC3_SIO_BASE+PP_BASE)		/* Parallel Port */
+#define IOC3_SIO_RTC_BASE	(IOC3_SIO_BASE+0x168)	/* Real Time Clock */
+#define IOC3_SIO_UB_BASE	(IOC3_SIO_BASE+UARTB_BASE)	/* UART B */
+#define IOC3_SIO_UA_BASE	(IOC3_SIO_BASE+UARTA_BASE)	/* UART A */
+
+/* SSRAM Diagnostic Access */
+#define IOC3_SSRAM	IOC3_RAM_OFF	/* base of SSRAM diagnostic access */
+#define IOC3_SSRAM_LEN	0x40000 /* 256kb (address space size, may not be fully populated) */
+#define IOC3_SSRAM_DM	0x0000ffff	/* data mask */
+#define IOC3_SSRAM_PM	0x00010000	/* parity mask */
+
+/* bitmasks for PCI_SCR */
+#define PCI_SCR_PAR_RESP_EN	0x00000040	/* enb PCI parity checking */
+#define PCI_SCR_SERR_EN		0x00000100	/* enable the SERR# driver */
+#define PCI_SCR_DROP_MODE_EN	0x00008000	/* drop pios on parity err */
+#define PCI_SCR_RX_SERR		(0x1 << 16)
+#define PCI_SCR_DROP_MODE	(0x1 << 17)
+#define PCI_SCR_SIG_PAR_ERR	(0x1 << 24)
+#define PCI_SCR_SIG_TAR_ABRT	(0x1 << 27)
+#define PCI_SCR_RX_TAR_ABRT	(0x1 << 28)
+#define PCI_SCR_SIG_MST_ABRT	(0x1 << 29)
+#define PCI_SCR_SIG_SERR	(0x1 << 30)
+#define PCI_SCR_PAR_ERR		(0x1 << 31)
+
+/* bitmasks for IOC3_KM_CSR */
+#define KM_CSR_K_WRT_PEND 0x00000001	/* kbd port xmitting or resetting */
+#define KM_CSR_M_WRT_PEND 0x00000002	/* mouse port xmitting or resetting */
+#define KM_CSR_K_LCB	  0x00000004	/* Line Cntrl Bit for last KBD write */
+#define KM_CSR_M_LCB	  0x00000008	/* same for mouse */
+#define KM_CSR_K_DATA	  0x00000010	/* state of kbd data line */
+#define KM_CSR_K_CLK	  0x00000020	/* state of kbd clock line */
+#define KM_CSR_K_PULL_DATA 0x00000040	/* pull kbd data line low */
+#define KM_CSR_K_PULL_CLK 0x00000080	/* pull kbd clock line low */
+#define KM_CSR_M_DATA	  0x00000100	/* state of ms data line */
+#define KM_CSR_M_CLK	  0x00000200	/* state of ms clock line */
+#define KM_CSR_M_PULL_DATA 0x00000400	/* pull ms data line low */
+#define KM_CSR_M_PULL_CLK 0x00000800	/* pull ms clock line low */
+#define KM_CSR_EMM_MODE	  0x00001000	/* emulation mode */
+#define KM_CSR_SIM_MODE	  0x00002000	/* clock X8 */
+#define KM_CSR_K_SM_IDLE  0x00004000	/* Keyboard is idle */
+#define KM_CSR_M_SM_IDLE  0x00008000	/* Mouse is idle */
+#define KM_CSR_K_TO	  0x00010000	/* Keyboard trying to send/receive */
+#define KM_CSR_M_TO	  0x00020000	/* Mouse trying to send/receive */
+#define KM_CSR_K_TO_EN	  0x00040000	/* KM_CSR_K_TO + KM_CSR_K_TO_EN = cause
+					   SIO_IR to assert */
+#define KM_CSR_M_TO_EN	  0x00080000	/* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause
+					   SIO_IR to assert */
+#define KM_CSR_K_CLAMP_ONE	0x00100000	/* Pull K_CLK low after rec. one char */
+#define KM_CSR_M_CLAMP_ONE	0x00200000	/* Pull M_CLK low after rec. one char */
+#define KM_CSR_K_CLAMP_THREE	0x00400000	/* Pull K_CLK low after rec. three chars */
+#define KM_CSR_M_CLAMP_THREE	0x00800000	/* Pull M_CLK low after rec. three char */
+
+/* bitmasks for IOC3_K_RD and IOC3_M_RD */
+#define KM_RD_DATA_2	0x000000ff	/* 3rd char recvd since last read */
+#define KM_RD_DATA_2_SHIFT 0
+#define KM_RD_DATA_1	0x0000ff00	/* 2nd char recvd since last read */
+#define KM_RD_DATA_1_SHIFT 8
+#define KM_RD_DATA_0	0x00ff0000	/* 1st char recvd since last read */
+#define KM_RD_DATA_0_SHIFT 16
+#define KM_RD_FRAME_ERR_2 0x01000000	/*  framing or parity error in byte 2 */
+#define KM_RD_FRAME_ERR_1 0x02000000	/* same for byte 1 */
+#define KM_RD_FRAME_ERR_0 0x04000000	/* same for byte 0 */
+
+#define KM_RD_KBD_MSE	0x08000000	/* 0 if from kbd, 1 if from mouse */
+#define KM_RD_OFLO	0x10000000	/* 4th char recvd before this read */
+#define KM_RD_VALID_2	0x20000000	/* DATA_2 valid */
+#define KM_RD_VALID_1	0x40000000	/* DATA_1 valid */
+#define KM_RD_VALID_0	0x80000000	/* DATA_0 valid */
+#define KM_RD_VALID_ALL (KM_RD_VALID_0|KM_RD_VALID_1|KM_RD_VALID_2)
+
+/* bitmasks for IOC3_K_WD & IOC3_M_WD */
+#define KM_WD_WRT_DATA	0x000000ff	/* write to keyboard/mouse port */
+#define KM_WD_WRT_DATA_SHIFT 0
+
+/* bitmasks for serial RX status byte */
+#define RXSB_OVERRUN	0x01	/* char(s) lost */
+#define RXSB_PAR_ERR	0x02	/* parity error */
+#define RXSB_FRAME_ERR	0x04	/* framing error */
+#define RXSB_BREAK	0x08	/* break character */
+#define RXSB_CTS	0x10	/* state of CTS */
+#define RXSB_DCD	0x20	/* state of DCD */
+#define RXSB_MODEM_VALID 0x40	/* DCD, CTS and OVERRUN are valid */
+#define RXSB_DATA_VALID 0x80	/* data byte, FRAME_ERR PAR_ERR & BREAK valid */
+
+/* bitmasks for serial TX control byte */
+#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */
+#define TXCB_INVALID	0x00	/* byte is invalid */
+#define TXCB_VALID	0x40	/* byte is valid */
+#define TXCB_MCR	0x80	/* data<7:0> to modem control register */
+#define TXCB_DELAY	0xc0	/* delay data<7:0> mSec */
+
+/* bitmasks for IOC3_SBBR_L */
+#define SBBR_L_SIZE	0x00000001	/* 0 == 1KB rings, 1 == 4KB rings */
+#define SBBR_L_BASE	0xfffff000	/* lower serial ring base addr */
+
+/* bitmasks for IOC3_SSCR_<A:B> */
+#define SSCR_RX_THRESHOLD 0x000001ff	/* hiwater mark */
+#define SSCR_TX_TIMER_BUSY 0x00010000	/* TX timer in progress */
+#define SSCR_HFC_EN	0x00020000	/* hardware flow control enabled */
+#define SSCR_RX_RING_DCD 0x00040000	/* post RX record on delta-DCD */
+#define SSCR_RX_RING_CTS 0x00080000	/* post RX record on delta-CTS */
+#define SSCR_HIGH_SPD	0x00100000	/* 4X speed */
+#define SSCR_DIAG	0x00200000	/* bypass clock divider for sim */
+#define SSCR_RX_DRAIN	0x08000000	/* drain RX buffer to memory */
+#define SSCR_DMA_EN	0x10000000	/* enable ring buffer DMA */
+#define SSCR_DMA_PAUSE	0x20000000	/* pause DMA */
+#define SSCR_PAUSE_STATE 0x40000000	/* sets when PAUSE takes effect */
+#define SSCR_RESET	0x80000000	/* reset DMA channels */
+
+/* all producer/comsumer pointers are the same bitfield */
+#define PROD_CONS_PTR_4K 0x00000ff8	/* for 4K buffers */
+#define PROD_CONS_PTR_1K 0x000003f8	/* for 1K buffers */
+#define PROD_CONS_PTR_OFF 3
+
+/* bitmasks for IOC3_SRCIR_<A:B> */
+#define SRCIR_ARM	0x80000000	/* arm RX timer */
+
+/* bitmasks for IOC3_SRPIR_<A:B> */
+#define SRPIR_BYTE_CNT	0x07000000	/* bytes in packer */
+#define SRPIR_BYTE_CNT_SHIFT 24
+
+/* bitmasks for IOC3_STCIR_<A:B> */
+#define STCIR_BYTE_CNT	0x0f000000	/* bytes in unpacker */
+#define STCIR_BYTE_CNT_SHIFT 24
+
+/* bitmasks for IOC3_SHADOW_<A:B> */
+#define SHADOW_DR	0x00000001	/* data ready */
+#define SHADOW_OE	0x00000002	/* overrun error */
+#define SHADOW_PE	0x00000004	/* parity error */
+#define SHADOW_FE	0x00000008	/* framing error */
+#define SHADOW_BI	0x00000010	/* break interrupt */
+#define SHADOW_THRE	0x00000020	/* transmit holding register empty */
+#define SHADOW_TEMT	0x00000040	/* transmit shift register empty */
+#define SHADOW_RFCE	0x00000080	/* char in RX fifo has an error */
+#define SHADOW_DCTS	0x00010000	/* delta clear to send */
+#define SHADOW_DDCD	0x00080000	/* delta data carrier detect */
+#define SHADOW_CTS	0x00100000	/* clear to send */
+#define SHADOW_DCD	0x00800000	/* data carrier detect */
+#define SHADOW_DTR	0x01000000	/* data terminal ready */
+#define SHADOW_RTS	0x02000000	/* request to send */
+#define SHADOW_OUT1	0x04000000	/* 16550 OUT1 bit */
+#define SHADOW_OUT2	0x08000000	/* 16550 OUT2 bit */
+#define SHADOW_LOOP	0x10000000	/* loopback enabled */
+
+/* bitmasks for IOC3_SRTR_<A:B> */
+#define SRTR_CNT	0x00000fff	/* reload value for RX timer */
+#define SRTR_CNT_VAL	0x0fff0000	/* current value of RX timer */
+#define SRTR_CNT_VAL_SHIFT 16
+#define SRTR_HZ		16000	/* SRTR clock frequency */
+
+/* bitmasks for IOC3_SIO_IR, IOC3_SIO_IEC and IOC3_SIO_IES  */
+#define SIO_IR_SA_TX_MT		0x00000001	/* Serial port A TX empty */
+#define SIO_IR_SA_RX_FULL	0x00000002	/* port A RX buf full */
+#define SIO_IR_SA_RX_HIGH	0x00000004	/* port A RX hiwat */
+#define SIO_IR_SA_RX_TIMER	0x00000008	/* port A RX timeout */
+#define SIO_IR_SA_DELTA_DCD	0x00000010	/* port A delta DCD */
+#define SIO_IR_SA_DELTA_CTS	0x00000020	/* port A delta CTS */
+#define SIO_IR_SA_INT		0x00000040	/* port A pass-thru intr */
+#define SIO_IR_SA_TX_EXPLICIT	0x00000080	/* port A explicit TX thru */
+#define SIO_IR_SA_MEMERR	0x00000100	/* port A PCI error */
+#define SIO_IR_SB_TX_MT		0x00000200	/* */
+#define SIO_IR_SB_RX_FULL	0x00000400	/* */
+#define SIO_IR_SB_RX_HIGH	0x00000800	/* */
+#define SIO_IR_SB_RX_TIMER	0x00001000	/* */
+#define SIO_IR_SB_DELTA_DCD	0x00002000	/* */
+#define SIO_IR_SB_DELTA_CTS	0x00004000	/* */
+#define SIO_IR_SB_INT		0x00008000	/* */
+#define SIO_IR_SB_TX_EXPLICIT	0x00010000	/* */
+#define SIO_IR_SB_MEMERR	0x00020000	/* */
+#define SIO_IR_PP_INT		0x00040000	/* P port pass-thru intr */
+#define SIO_IR_PP_INTA		0x00080000	/* PP context A thru */
+#define SIO_IR_PP_INTB		0x00100000	/* PP context B thru */
+#define SIO_IR_PP_MEMERR	0x00200000	/* PP PCI error */
+#define SIO_IR_KBD_INT		0x00400000	/* kbd/mouse intr */
+#define SIO_IR_RT_INT		0x08000000	/* RT output pulse */
+#define SIO_IR_GEN_INT1		0x10000000	/* RT input pulse */
+#define SIO_IR_GEN_INT_SHIFT	28
+
+/* per device interrupt masks */
+#define SIO_IR_SA		(SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | \
+				 SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | \
+				 SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | \
+				 SIO_IR_SA_INT | SIO_IR_SA_TX_EXPLICIT | \
+				 SIO_IR_SA_MEMERR)
+#define SIO_IR_SB		(SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | \
+				 SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | \
+				 SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | \
+				 SIO_IR_SB_INT | SIO_IR_SB_TX_EXPLICIT | \
+				 SIO_IR_SB_MEMERR)
+#define SIO_IR_PP		(SIO_IR_PP_INT | SIO_IR_PP_INTA | \
+				 SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
+#define SIO_IR_RT		(SIO_IR_RT_INT | SIO_IR_GEN_INT1)
+
+/* macro to load pending interrupts */
+#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \
+				 PCI_INW(&((mem)->sio_ies_ro)))
+
+/* bitmasks for SIO_CR */
+#define SIO_CR_SIO_RESET	0x00000001	/* reset the SIO */
+#define SIO_CR_SER_A_BASE	0x000000fe	/* DMA poll addr port A */
+#define SIO_CR_SER_A_BASE_SHIFT 1
+#define SIO_CR_SER_B_BASE	0x00007f00	/* DMA poll addr port B */
+#define SIO_CR_SER_B_BASE_SHIFT 8
+#define SIO_SR_CMD_PULSE	0x00078000	/* byte bus strobe length */
+#define SIO_CR_CMD_PULSE_SHIFT	15
+#define SIO_CR_ARB_DIAG		0x00380000	/* cur !enet PCI requet (ro) */
+#define SIO_CR_ARB_DIAG_TXA	0x00000000
+#define SIO_CR_ARB_DIAG_RXA	0x00080000
+#define SIO_CR_ARB_DIAG_TXB	0x00100000
+#define SIO_CR_ARB_DIAG_RXB	0x00180000
+#define SIO_CR_ARB_DIAG_PP	0x00200000
+#define SIO_CR_ARB_DIAG_IDLE	0x00400000	/* 0 -> active request (ro) */
+
+/* bitmasks for INT_OUT */
+#define INT_OUT_COUNT	0x0000ffff	/* pulse interval timer */
+#define INT_OUT_MODE	0x00070000	/* mode mask */
+#define INT_OUT_MODE_0	0x00000000	/* set output to 0 */
+#define INT_OUT_MODE_1	0x00040000	/* set output to 1 */
+#define INT_OUT_MODE_1PULSE 0x00050000	/* send 1 pulse */
+#define INT_OUT_MODE_PULSES 0x00060000	/* send 1 pulse every interval */
+#define INT_OUT_MODE_SQW 0x00070000	/* toggle output every interval */
+#define INT_OUT_DIAG	0x40000000	/* diag mode */
+#define INT_OUT_INT_OUT 0x80000000	/* current state of INT_OUT */
+
+/* time constants for INT_OUT */
+#define INT_OUT_NS_PER_TICK (30 * 260)	/* 30 ns PCI clock, divisor=260 */
+#define INT_OUT_TICKS_PER_PULSE 3	/* outgoing pulse lasts 3 ticks */
+#define INT_OUT_US_TO_COUNT(x)		/* convert uS to a count value */ \
+	(((x) * 10 + INT_OUT_NS_PER_TICK / 200) *	\
+	 100 / INT_OUT_NS_PER_TICK - 1)
+#define INT_OUT_COUNT_TO_US(x)		/* convert count value to uS */ \
+	(((x) + 1) * INT_OUT_NS_PER_TICK / 1000)
+#define INT_OUT_MIN_TICKS 3	/* min period is width of pulse in "ticks" */
+#define INT_OUT_MAX_TICKS INT_OUT_COUNT		/* largest possible count */
+
+/* bitmasks for GPCR */
+#define GPCR_DIR	0x000000ff	/* tristate pin input or output */
+#define GPCR_DIR_PIN(x) (1<<(x))	/* access one of the DIR bits */
+#define GPCR_EDGE	0x000f0000	/* extint edge or level sensitive */
+#define GPCR_EDGE_PIN(x) (1<<((x)+15))	/* access one of the EDGE bits */
+
+/* values for GPCR */
+#define GPCR_INT_OUT_EN 0x00100000	/* enable INT_OUT to pin 0 */
+#define GPCR_MLAN_EN	0x00200000	/* enable MCR to pin 8 */
+#define GPCR_DIR_SERA_XCVR 0x00000080	/* Port A Transceiver select enable */
+#define GPCR_DIR_SERB_XCVR 0x00000040	/* Port B Transceiver select enable */
+#define GPCR_DIR_PHY_RST   0x00000020	/* ethernet PHY reset enable */
+
+/* defs for some of the generic I/O pins */
+#define GPCR_PHY_RESET		0x20	/* pin is output to PHY reset */
+#define GPCR_UARTB_MODESEL	0x40	/* pin is output to port B mode sel */
+#define GPCR_UARTA_MODESEL	0x80	/* pin is output to port A mode sel */
+
+#define GPPR_PHY_RESET_PIN	5	/* GIO pin controlling phy reset */
+#define GPPR_UARTB_MODESEL_PIN	6	/* GIO pin controlling uart b mode select */
+#define GPPR_UARTA_MODESEL_PIN	7	/* GIO pin controlling uart a mode select */
+
+#define EMCR_DUPLEX		0x00000001
+#define EMCR_PROMISC		0x00000002
+#define EMCR_PADEN		0x00000004
+#define EMCR_RXOFF_MASK		0x000001f8
+#define EMCR_RXOFF_SHIFT	3
+#define EMCR_RAMPAR		0x00000200
+#define EMCR_BADPAR		0x00000800
+#define EMCR_BUFSIZ		0x00001000
+#define EMCR_TXDMAEN		0x00002000
+#define EMCR_TXEN		0x00004000
+#define EMCR_RXDMAEN		0x00008000
+#define EMCR_RXEN		0x00010000
+#define EMCR_LOOPBACK		0x00020000
+#define EMCR_ARB_DIAG		0x001c0000
+#define EMCR_ARB_DIAG_IDLE	0x00200000
+#define EMCR_RST		0x80000000
+
+#define EISR_RXTIMERINT		0x00000001
+#define EISR_RXTHRESHINT	0x00000002
+#define EISR_RXOFLO		0x00000004
+#define EISR_RXBUFOFLO		0x00000008
+#define EISR_RXMEMERR		0x00000010
+#define EISR_RXPARERR		0x00000020
+#define EISR_TXEMPTY		0x00010000
+#define EISR_TXRTRY		0x00020000
+#define EISR_TXEXDEF		0x00040000
+#define EISR_TXLCOL		0x00080000
+#define EISR_TXGIANT		0x00100000
+#define EISR_TXBUFUFLO		0x00200000
+#define EISR_TXEXPLICIT		0x00400000
+#define EISR_TXCOLLWRAP		0x00800000
+#define EISR_TXDEFERWRAP	0x01000000
+#define EISR_TXMEMERR		0x02000000
+#define EISR_TXPARERR		0x04000000
+
+#define ERCSR_THRESH_MASK	0x000001ff	/* enet RX threshold */
+#define ERCSR_RX_TMR		0x40000000	/* simulation only */
+#define ERCSR_DIAG_OFLO		0x80000000	/* simulation only */
+
+#define ERBR_ALIGNMENT		4096
+#define ERBR_L_RXRINGBASE_MASK	0xfffff000
+
+#define ERBAR_BARRIER_BIT	0x0100
+#define ERBAR_RXBARR_MASK	0xffff0000
+#define ERBAR_RXBARR_SHIFT	16
+
+#define ERCIR_RXCONSUME_MASK	0x00000fff
+
+#define ERPIR_RXPRODUCE_MASK	0x00000fff
+#define ERPIR_ARM		0x80000000
+
+#define ERTR_CNT_MASK		0x000007ff
+
+#define ETCSR_IPGT_MASK		0x0000007f
+#define ETCSR_IPGR1_MASK	0x00007f00
+#define ETCSR_IPGR1_SHIFT	8
+#define ETCSR_IPGR2_MASK	0x007f0000
+#define ETCSR_IPGR2_SHIFT	16
+#define ETCSR_NOTXCLK		0x80000000
+
+#define ETCDC_COLLCNT_MASK	0x0000ffff
+#define ETCDC_DEFERCNT_MASK	0xffff0000
+#define ETCDC_DEFERCNT_SHIFT	16
+
+#define ETBR_ALIGNMENT		(64*1024)
+#define ETBR_L_RINGSZ_MASK	0x00000001
+#define ETBR_L_RINGSZ128	0
+#define ETBR_L_RINGSZ512	1
+#define ETBR_L_TXRINGBASE_MASK	0xffffc000
+
+#define ETCIR_TXCONSUME_MASK	0x0000ffff
+#define ETCIR_IDLE		0x80000000
+
+#define ETPIR_TXPRODUCE_MASK	0x0000ffff
+
+#define EBIR_TXBUFPROD_MASK	0x0000001f
+#define EBIR_TXBUFCONS_MASK	0x00001f00
+#define EBIR_TXBUFCONS_SHIFT	8
+#define EBIR_RXBUFPROD_MASK	0x007fc000
+#define EBIR_RXBUFPROD_SHIFT	14
+#define EBIR_RXBUFCONS_MASK	0xff800000
+#define EBIR_RXBUFCONS_SHIFT	23
+
+#define MICR_REGADDR_MASK	0x0000001f
+#define MICR_PHYADDR_MASK	0x000003e0
+#define MICR_PHYADDR_SHIFT	5
+#define MICR_READTRIG		0x00000400
+#define MICR_BUSY		0x00000800
+
+#define MIDR_DATA_MASK		0x0000ffff
+
+#define ERXBUF_IPCKSUM_MASK	0x0000ffff
+#define ERXBUF_BYTECNT_MASK	0x07ff0000
+#define ERXBUF_BYTECNT_SHIFT	16
+#define ERXBUF_V		0x80000000
+
+#define ERXBUF_CRCERR		0x00000001	/* aka RSV15 */
+#define ERXBUF_FRAMERR		0x00000002	/* aka RSV14 */
+#define ERXBUF_CODERR		0x00000004	/* aka RSV13 */
+#define ERXBUF_INVPREAMB	0x00000008	/* aka RSV18 */
+#define ERXBUF_LOLEN		0x00007000	/* aka RSV2_0 */
+#define ERXBUF_HILEN		0x03ff0000	/* aka RSV12_3 */
+#define ERXBUF_MULTICAST	0x04000000	/* aka RSV16 */
+#define ERXBUF_BROADCAST	0x08000000	/* aka RSV17 */
+#define ERXBUF_LONGEVENT	0x10000000	/* aka RSV19 */
+#define ERXBUF_BADPKT		0x20000000	/* aka RSV20 */
+#define ERXBUF_GOODPKT		0x40000000	/* aka RSV21 */
+#define ERXBUF_CARRIER		0x80000000	/* aka RSV22 */
+
+#define ETXD_BYTECNT_MASK	0x000007ff	/* total byte count */
+#define ETXD_INTWHENDONE	0x00001000	/* intr when done */
+#define ETXD_D0V		0x00010000	/* data 0 valid */
+#define ETXD_B1V		0x00020000	/* buf 1 valid */
+#define ETXD_B2V		0x00040000	/* buf 2 valid */
+#define ETXD_DOCHECKSUM		0x00080000	/* insert ip cksum */
+#define ETXD_CHKOFF_MASK	0x07f00000	/* cksum byte offset */
+#define ETXD_CHKOFF_SHIFT	20
+
+#define ETXD_D0CNT_MASK		0x0000007f
+#define ETXD_B1CNT_MASK		0x0007ff00
+#define ETXD_B1CNT_SHIFT	8
+#define ETXD_B2CNT_MASK		0x7ff00000
+#define ETXD_B2CNT_SHIFT	20
+
+typedef enum ioc3_subdevs_e {
+    ioc3_subdev_ether,
+    ioc3_subdev_generic,
+    ioc3_subdev_nic,
+    ioc3_subdev_kbms,
+    ioc3_subdev_ttya,
+    ioc3_subdev_ttyb,
+    ioc3_subdev_ecpp,
+    ioc3_subdev_rt,
+    ioc3_nsubdevs
+} ioc3_subdev_t;
+
+/* subdevice disable bits,
+ * from the standard INFO_LBL_SUBDEVS
+ */
+#define IOC3_SDB_ETHER		(1<<ioc3_subdev_ether)
+#define IOC3_SDB_GENERIC	(1<<ioc3_subdev_generic)
+#define IOC3_SDB_NIC		(1<<ioc3_subdev_nic)
+#define IOC3_SDB_KBMS		(1<<ioc3_subdev_kbms)
+#define IOC3_SDB_TTYA		(1<<ioc3_subdev_ttya)
+#define IOC3_SDB_TTYB		(1<<ioc3_subdev_ttyb)
+#define IOC3_SDB_ECPP		(1<<ioc3_subdev_ecpp)
+#define IOC3_SDB_RT		(1<<ioc3_subdev_rt)
+
+#define IOC3_ALL_SUBDEVS	((1<<ioc3_nsubdevs)-1)
+
+#define IOC3_SDB_SERIAL		(IOC3_SDB_TTYA|IOC3_SDB_TTYB)
+
+#define IOC3_STD_SUBDEVS	IOC3_ALL_SUBDEVS
+
+#define IOC3_INTA_SUBDEVS	IOC3_SDB_ETHER
+#define IOC3_INTB_SUBDEVS	(IOC3_SDB_GENERIC|IOC3_SDB_KBMS|IOC3_SDB_SERIAL|IOC3_SDB_ECPP|IOC3_SDB_RT)
+
+#endif /* _IOC3_H */
diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h
new file mode 100644
index 0000000..09e590d
--- /dev/null
+++ b/arch/mips/include/asm/sn/klconfig.h
@@ -0,0 +1,898 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/klconfig.h>.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef	_ASM_SN_KLCONFIG_H
+#define	_ASM_SN_KLCONFIG_H
+
+/*
+ * The KLCONFIG structures store info about the various BOARDs found
+ * during Hardware Discovery. In addition, it stores info about the
+ * components found on the BOARDs.
+ */
+
+/*
+ * WARNING:
+ *	Certain assembly language routines (notably xxxxx.s) in the IP27PROM
+ *	will depend on the format of the data structures in this file.  In
+ *      most cases, rearranging the fields can seriously break things.
+ *      Adding fields in the beginning or middle can also break things.
+ *      Add fields if necessary, to the end of a struct in such a way
+ *      that offsets of existing fields do not change.
+ */
+
+#include <linux/types.h>
+#include <asm/sn/types.h>
+
+#if defined(CONFIG_SGI_IP27)
+
+#include <asm/sn/sn0/addrs.h>
+//#include <sys/SN/router.h>
+// XXX Stolen from <sys/SN/router.h>:
+#define MAX_ROUTER_PORTS (6)    /* Max. number of ports on a router */
+#include <asm/sn/fru.h>
+//#include <sys/graph.h>
+//#include <sys/xtalk/xbow.h>
+
+#elif defined(CONFIG_SGI_IP35)
+
+#include <asm/sn/sn1/addrs.h>
+#include <sys/sn/router.h>
+#include <sys/graph.h>
+#include <asm/xtalk/xbow.h>
+
+#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
+
+#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35)
+#include <asm/sn/agent.h>
+#include <asm/fw/arc/types.h>
+#include <asm/fw/arc/hinv.h>
+#if defined(CONFIG_SGI_IP35)
+// The hack file has to be before vector and after sn0_fru....
+#include <asm/hack.h>
+#include <asm/sn/vector.h>
+#include <asm/xtalk/xtalk.h>
+#endif /* CONFIG_SGI_IP35 */
+#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
+
+typedef u64  nic_t;
+
+#define KLCFGINFO_MAGIC	0xbeedbabe
+
+typedef s32 klconf_off_t;
+
+/*
+ * Some IMPORTANT OFFSETS. These are the offsets on all NODES.
+ */
+#define	MAX_MODULE_ID		255
+#define SIZE_PAD		4096 /* 4k padding for structures */
+/*
+ * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets,
+ * 2 Midplanes assuming no pci card cages
+ */
+#define MAX_SLOTS_PER_NODE	(1 + 2 + 6 + 2)
+
+/* XXX if each node is guranteed to have some memory */
+
+#define MAX_PCI_DEVS		8
+
+/* lboard_t->brd_flags fields */
+/* All bits in this field are currently used. Try the pad fields if
+   you need more flag bits */
+
+#define ENABLE_BOARD 		0x01
+#define FAILED_BOARD  		0x02
+#define DUPLICATE_BOARD 	0x04    /* Boards like midplanes/routers which
+					   are discovered twice. Use one of them */
+#define VISITED_BOARD		0x08	/* Used for compact hub numbering. */
+#define LOCAL_MASTER_IO6	0x10 	/* master io6 for that node */
+#define GLOBAL_MASTER_IO6	0x20
+#define THIRD_NIC_PRESENT 	0x40  	/* for future use */
+#define SECOND_NIC_PRESENT 	0x80 	/* addons like MIO are present */
+
+/* klinfo->flags fields */
+
+#define KLINFO_ENABLE 		0x01    /* This component is enabled */
+#define KLINFO_FAILED   	0x02 	/* This component failed */
+#define KLINFO_DEVICE   	0x04 	/* This component is a device */
+#define KLINFO_VISITED  	0x08 	/* This component has been visited */
+#define KLINFO_CONTROLLER   	0x10 	/* This component is a device controller */
+#define KLINFO_INSTALL   	0x20  	/* Install a driver */
+#define	KLINFO_HEADLESS		0x40	/* Headless (or hubless) component */
+#define IS_CONSOLE_IOC3(i)	((((klinfo_t *)i)->flags) & KLINFO_INSTALL)
+
+#define GB2		0x80000000
+
+#define MAX_RSV_PTRS	32
+
+/* Structures to manage various data storage areas */
+/* The numbers must be contiguous since the array index i
+   is used in the code to allocate various areas.
+*/
+
+#define BOARD_STRUCT 		0
+#define COMPONENT_STRUCT 	1
+#define ERRINFO_STRUCT 		2
+#define KLMALLOC_TYPE_MAX 	(ERRINFO_STRUCT + 1)
+#define DEVICE_STRUCT 		3
+
+
+typedef struct console_s {
+	unsigned long 	uart_base;
+	unsigned long 	config_base;
+	unsigned long 	memory_base;
+	short		baud;
+	short		flag;
+	int		type;
+	nasid_t		nasid;
+	char		wid;
+	char 		npci;
+	nic_t		baseio_nic;
+} console_t;
+
+typedef struct klc_malloc_hdr {
+        klconf_off_t km_base;
+        klconf_off_t km_limit;
+        klconf_off_t km_current;
+} klc_malloc_hdr_t;
+
+/* Functions/macros needed to use this structure */
+
+typedef struct kl_config_hdr {
+	u64		ch_magic;	/* set this to KLCFGINFO_MAGIC */
+	u32		ch_version;    /* structure version number */
+	klconf_off_t	ch_malloc_hdr_off; /* offset of ch_malloc_hdr */
+	klconf_off_t	ch_cons_off;       /* offset of ch_cons */
+	klconf_off_t	ch_board_info;	/* the link list of boards */
+	console_t	ch_cons_info;	/* address info of the console */
+	klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX];
+	confidence_t	ch_sw_belief;	/* confidence that software is bad*/
+	confidence_t	ch_sn0net_belief; /* confidence that sn0net is bad */
+} kl_config_hdr_t;
+
+
+#define KL_CONFIG_HDR(_nasid) 	((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
+#define KL_CONFIG_INFO_OFFSET(_nasid)					\
+        (KL_CONFIG_HDR(_nasid)->ch_board_info)
+#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off)				\
+        (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
+
+#define KL_CONFIG_INFO(_nasid) 						\
+        (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ?		\
+	 NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
+	 0)
+#define KL_CONFIG_MAGIC(_nasid)		(KL_CONFIG_HDR(_nasid)->ch_magic)
+
+#define KL_CONFIG_CHECK_MAGIC(_nasid)					\
+        (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
+
+#define KL_CONFIG_HDR_INIT_MAGIC(_nasid)	\
+                  (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
+
+/* --- New Macros for the changed kl_config_hdr_t structure --- */
+
+#define PTR_CH_MALLOC_HDR(_k)   ((klc_malloc_hdr_t *)\
+			((unsigned long)_k + (_k->ch_malloc_hdr_off)))
+
+#define KL_CONFIG_CH_MALLOC_HDR(_n)   PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
+
+#define PTR_CH_CONS_INFO(_k)	((console_t *)\
+			((unsigned long)_k + (_k->ch_cons_off)))
+
+#define KL_CONFIG_CH_CONS_INFO(_n)   PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n))
+
+/* ------------------------------------------------------------- */
+
+#define KL_CONFIG_INFO_START(_nasid)	\
+        (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
+
+#define KL_CONFIG_BOARD_NASID(_brd)	((_brd)->brd_nasid)
+#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off)	((_brd)->brd_next = (_off))
+
+#define KL_CONFIG_DUPLICATE_BOARD(_brd)	((_brd)->brd_flags & DUPLICATE_BOARD)
+
+#define XBOW_PORT_TYPE_HUB(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB)
+#define XBOW_PORT_TYPE_IO(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO)
+
+#define XBOW_PORT_IS_ENABLED(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE)
+#define XBOW_PORT_NASID(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid)
+
+#define XBOW_PORT_IO     0x1
+#define XBOW_PORT_HUB    0x2
+#define XBOW_PORT_ENABLE 0x4
+
+#define	SN0_PORT_FENCE_SHFT	0
+#define	SN0_PORT_FENCE_MASK	(1 << SN0_PORT_FENCE_SHFT)
+
+/*
+ * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
+ * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
+ * the LOCAL/current NODE. REMOTE means it is attached to a different
+ * node.(TBD - Need a way to treat ROUTER boards.)
+ *
+ * There are 2 different structures to represent these boards -
+ * lboard - Local board, rboard - remote board. These 2 structures
+ * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
+ * Figure below). The first byte of the rboard or lboard structure
+ * is used to find out its type - no unions are used.
+ * If it is a lboard, then the config info of this board will be found
+ * on the local node. (LOCAL NODE BASE + offset value gives pointer to
+ * the structure.
+ * If it is a rboard, the local structure contains the node number
+ * and the offset of the beginning of the LINKED LIST on the remote node.
+ * The details of the hardware on a remote node can be built locally,
+ * if required, by reading the LINKED LIST on the remote node and
+ * ignoring all the rboards on that node.
+ *
+ * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
+ * First board info on the remote node. The remote node list is
+ * traversed as the local list, using the REMOTE BASE ADDRESS and not
+ * the local base address and ignoring all rboard values.
+ *
+ *
+ KLCONFIG
+
+ +------------+      +------------+      +------------+      +------------+
+ |  lboard    |  +-->|   lboard   |  +-->|   rboard   |  +-->|   lboard   |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | board info |  |   | board info |  |   |errinfo,bptr|  |   | board info |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | offset     |--+   |  offset    |--+   |  offset    |--+   |offset=NULL |
+ +------------+      +------------+      +------------+      +------------+
+
+
+ +------------+
+ | board info |
+ +------------+       +--------------------------------+
+ | compt 1    |------>| type, rev, diaginfo, size ...  |  (CPU)
+ +------------+       +--------------------------------+
+ | compt 2    |--+
+ +------------+  |    +--------------------------------+
+ |  ...       |  +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
+ +------------+       +--------------------------------+
+ | errinfo    |--+
+ +------------+  |    +--------------------------------+
+                 +--->|r/l brd errinfo,compt err flags |
+                      +--------------------------------+
+
+ *
+ * Each BOARD consists of COMPONENTs and the BOARD structure has
+ * pointers (offsets) to its COMPONENT structure.
+ * The COMPONENT structure has version info, size and speed info, revision,
+ * error info and the NIC info. This structure can accommodate any
+ * BOARD with arbitrary COMPONENT composition.
+ *
+ * The ERRORINFO part of each BOARD has error information
+ * that describes errors about the BOARD itself. It also has flags to
+ * indicate the COMPONENT(s) on the board that have errors. The error
+ * information specific to the COMPONENT is present in the respective
+ * COMPONENT structure.
+ *
+ * The ERRORINFO structure is also treated like a COMPONENT, ie. the
+ * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
+ * structure also has a pointer to the ERRORINFO structure. This is
+ * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
+ * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
+ * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
+ * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
+ * which is present on the REMOTE NODE.(TBD)
+ * REMOTE ERRINFO can be stored on any of the nearest nodes
+ * or on all the nearest nodes.(TBD)
+ * Like BOARD structures, REMOTE ERRINFO structures can be built locally
+ * using the rboard errinfo pointer.
+ *
+ * In order to get useful information from this Data organization, a set of
+ * interface routines are provided (TBD). The important thing to remember while
+ * manipulating the structures, is that, the NODE number information should
+ * be used. If the NODE is non-zero (remote) then each offset should
+ * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
+ * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
+ *
+ * Note that these structures do not provide much info about connectivity.
+ * That info will be part of HWGRAPH, which is an extension of the cfg_t
+ * data structure. (ref IP27prom/cfg.h) It has to be extended to include
+ * the IO part of the Network(TBD).
+ *
+ * The data structures below define the above concepts.
+ */
+
+/*
+ * Values for CPU types
+ */
+#define KL_CPU_R4000		0x1	/* Standard R4000 */
+#define KL_CPU_TFP		0x2	/* TFP processor */
+#define	KL_CPU_R10000		0x3	/* R10000 (T5) */
+#define KL_CPU_NONE		(-1)	/* no cpu present in slot */
+
+/*
+ * IP27 BOARD classes
+ */
+
+#define KLCLASS_MASK	0xf0
+#define KLCLASS_NONE	0x00
+#define KLCLASS_NODE	0x10             /* CPU, Memory and HUB board */
+#define KLCLASS_CPU	KLCLASS_NODE
+#define KLCLASS_IO	0x20             /* BaseIO, 4 ch SCSI, ethernet, FDDI
+					    and the non-graphics widget boards */
+#define KLCLASS_ROUTER	0x30             /* Router board */
+#define KLCLASS_MIDPLANE 0x40            /* We need to treat this as a board
+                                            so that we can record error info */
+#define KLCLASS_GFX	0x50		/* graphics boards */
+
+#define KLCLASS_PSEUDO_GFX	0x60	/* HDTV type cards that use a gfx
+					 * hw ifc to xtalk and are not gfx
+					 * class for sw purposes */
+
+#define KLCLASS_MAX	7		/* Bump this if a new CLASS is added */
+#define KLTYPE_MAX	10		/* Bump this if a new CLASS is added */
+
+#define KLCLASS_UNKNOWN	0xf0
+
+#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
+
+/*
+ * IP27 board types
+ */
+
+#define KLTYPE_MASK	0x0f
+#define KLTYPE_NONE	0x00
+#define KLTYPE_EMPTY	0x00
+
+#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0)
+#define KLTYPE_IP27	(KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */
+
+#define KLTYPE_WEIRDIO	(KLCLASS_IO  | 0x0)
+#define KLTYPE_BASEIO	(KLCLASS_IO  | 0x1) /* IOC3, SuperIO, Bridge, SCSI */
+#define KLTYPE_IO6	KLTYPE_BASEIO       /* Additional name */
+#define KLTYPE_4CHSCSI	(KLCLASS_IO  | 0x2)
+#define KLTYPE_MSCSI	KLTYPE_4CHSCSI      /* Additional name */
+#define KLTYPE_ETHERNET	(KLCLASS_IO  | 0x3)
+#define KLTYPE_MENET	KLTYPE_ETHERNET     /* Additional name */
+#define KLTYPE_FDDI  	(KLCLASS_IO  | 0x4)
+#define KLTYPE_UNUSED	(KLCLASS_IO  | 0x5) /* XXX UNUSED */
+#define KLTYPE_HAROLD   (KLCLASS_IO  | 0x6) /* PCI SHOE BOX */
+#define KLTYPE_PCI	KLTYPE_HAROLD
+#define KLTYPE_VME      (KLCLASS_IO  | 0x7) /* Any 3rd party VME card */
+#define KLTYPE_MIO   	(KLCLASS_IO  | 0x8)
+#define KLTYPE_FC    	(KLCLASS_IO  | 0x9)
+#define KLTYPE_LINC    	(KLCLASS_IO  | 0xA)
+#define KLTYPE_TPU    	(KLCLASS_IO  | 0xB) /* Tensor Processing Unit */
+#define KLTYPE_GSN_A   	(KLCLASS_IO  | 0xC) /* Main GSN board */
+#define KLTYPE_GSN_B   	(KLCLASS_IO  | 0xD) /* Auxiliary GSN board */
+
+#define KLTYPE_GFX	(KLCLASS_GFX | 0x0) /* unknown graphics type */
+#define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */
+#define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */
+
+#define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0)
+#define KLTYPE_ROUTER     (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_ROUTER2    KLTYPE_ROUTER		/* Obsolete! */
+#define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2)
+#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
+
+#define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0)
+#define KLTYPE_MIDPLANE8  (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */
+#define KLTYPE_MIDPLANE    KLTYPE_MIDPLANE8
+#define KLTYPE_PBRICK_XBOW	(KLCLASS_MIDPLANE | 0x2)
+
+#define KLTYPE_IOBRICK		(KLCLASS_IOBRICK | 0x0)
+#define KLTYPE_IBRICK		(KLCLASS_IOBRICK | 0x1)
+#define KLTYPE_PBRICK		(KLCLASS_IOBRICK | 0x2)
+#define KLTYPE_XBRICK		(KLCLASS_IOBRICK | 0x3)
+
+#define KLTYPE_PBRICK_BRIDGE	KLTYPE_PBRICK
+
+/* The value of type should be more than 8 so that hinv prints
+ * out the board name from the NIC string. For values less than
+ * 8 the name of the board needs to be hard coded in a few places.
+ * When bringup started nic names had not standardized and so we
+ * had to hard code. (For people interested in history.)
+ */
+#define KLTYPE_XTHD   	(KLCLASS_PSEUDO_GFX | 0x9)
+
+#define KLTYPE_UNKNOWN	(KLCLASS_UNKNOWN | 0xf)
+
+#define KLTYPE(_x) 	((_x) & KLTYPE_MASK)
+#define IS_MIO_PRESENT(l)	((l->brd_type == KLTYPE_BASEIO) && \
+				 (l->brd_flags & SECOND_NIC_PRESENT))
+#define IS_MIO_IOC3(l, n)	(IS_MIO_PRESENT(l) && (n > 2))
+
+/*
+ * board structures
+ */
+
+#define MAX_COMPTS_PER_BRD 24
+
+#define LOCAL_BOARD 1
+#define REMOTE_BOARD 2
+
+#define LBOARD_STRUCT_VERSION 	2
+
+typedef struct lboard_s {
+	klconf_off_t 	brd_next;         /* Next BOARD */
+	unsigned char 	struct_type;      /* type of structure, local or remote */
+	unsigned char 	brd_type;         /* type+class */
+	unsigned char 	brd_sversion;     /* version of this structure */
+        unsigned char 	brd_brevision;    /* board revision */
+        unsigned char 	brd_promver;      /* board prom version, if any */
+	unsigned char 	brd_flags;        /* Enabled, Disabled etc */
+	unsigned char 	brd_slot;         /* slot number */
+	unsigned short	brd_debugsw;      /* Debug switches */
+	moduleid_t	brd_module;       /* module to which it belongs */
+	partid_t 	brd_partition;    /* Partition number */
+        unsigned short 	brd_diagval;      /* diagnostic value */
+        unsigned short 	brd_diagparm;     /* diagnostic parameter */
+        unsigned char 	brd_inventory;    /* inventory history */
+        unsigned char 	brd_numcompts;    /* Number of components */
+        nic_t         	brd_nic;          /* Number in CAN */
+	nasid_t		brd_nasid;        /* passed parameter */
+	klconf_off_t 	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+	klconf_off_t 	brd_errinfo;      /* Board's error information */
+	struct lboard_s *brd_parent;	  /* Logical parent for this brd */
+	vertex_hdl_t	brd_graph_link;   /* vertex hdl to connect extern compts */
+	confidence_t	brd_confidence;	  /* confidence that the board is bad */
+	nasid_t		brd_owner;        /* who owns this board */
+	unsigned char 	brd_nic_flags;    /* To handle 8 more NICs */
+	char		brd_name[32];
+} lboard_t;
+
+
+/*
+ *	Make sure we pass back the calias space address for local boards.
+ *	klconfig board traversal and error structure extraction defines.
+ */
+
+#define BOARD_SLOT(_brd)	((_brd)->brd_slot)
+
+#define KLCF_CLASS(_brd)	KLCLASS((_brd)->brd_type)
+#define KLCF_TYPE(_brd)		KLTYPE((_brd)->brd_type)
+#define KLCF_REMOTE(_brd)  	(((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
+#define KLCF_NUM_COMPS(_brd)	((_brd)->brd_numcompts)
+#define KLCF_MODULE_ID(_brd)	((_brd)->brd_module)
+
+#define KLCF_NEXT(_brd) 	\
+        ((_brd)->brd_next ? 	\
+	 (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\
+	 NULL)
+#define KLCF_COMP(_brd, _ndx)   \
+                (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd),	\
+					       (_brd)->brd_compts[(_ndx)]))
+
+#define KLCF_COMP_ERROR(_brd, _comp)	\
+               (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
+
+#define KLCF_COMP_TYPE(_comp)	((_comp)->struct_type)
+#define KLCF_BRIDGE_W_ID(_comp)	((_comp)->physid)	/* Widget ID */
+
+
+
+/*
+ * Generic info structure. This stores common info about a
+ * component.
+ */
+
+typedef struct klinfo_s {                  /* Generic info */
+        unsigned char   struct_type;       /* type of this structure */
+        unsigned char   struct_version;    /* version of this structure */
+        unsigned char   flags;            /* Enabled, disabled etc */
+        unsigned char   revision;         /* component revision */
+        unsigned short  diagval;          /* result of diagnostics */
+        unsigned short  diagparm;         /* diagnostic parameter */
+        unsigned char   inventory;        /* previous inventory status */
+	nic_t 		nic;              /* MUst be aligned properly */
+        unsigned char   physid;           /* physical id of component */
+        unsigned int    virtid;           /* virtual id as seen by system */
+	unsigned char	widid;	          /* Widget id - if applicable */
+	nasid_t		nasid;            /* node number - from parent */
+	char		pad1;		  /* pad out structure. */
+	char		pad2;		  /* pad out structure. */
+	COMPONENT	*arcs_compt;      /* ptr to the arcs struct for ease*/
+        klconf_off_t	errinfo;          /* component specific errors */
+        unsigned short  pad3;             /* pci fields have moved over to */
+        unsigned short  pad4;             /* klbri_t */
+} klinfo_t ;
+
+#define KLCONFIG_INFO_ENABLED(_i)	((_i)->flags & KLINFO_ENABLE)
+/*
+ * Component structures.
+ * Following are the currently identified components:
+ * 	CPU, HUB, MEM_BANK,
+ * 	XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE)
+ * 	BRIDGE, IOC3, SuperIO, SCSI, FDDI
+ * 	ROUTER
+ * 	GRAPHICS
+ */
+#define KLSTRUCT_UNKNOWN	0
+#define KLSTRUCT_CPU  		1
+#define KLSTRUCT_HUB  		2
+#define KLSTRUCT_MEMBNK 	3
+#define KLSTRUCT_XBOW 		4
+#define KLSTRUCT_BRI 		5
+#define KLSTRUCT_IOC3 		6
+#define KLSTRUCT_PCI 		7
+#define KLSTRUCT_VME 		8
+#define KLSTRUCT_ROU		9
+#define KLSTRUCT_GFX 		10
+#define KLSTRUCT_SCSI 		11
+#define KLSTRUCT_FDDI 		12
+#define KLSTRUCT_MIO 		13
+#define KLSTRUCT_DISK 		14
+#define KLSTRUCT_TAPE 		15
+#define KLSTRUCT_CDROM 		16
+#define KLSTRUCT_HUB_UART 	17
+#define KLSTRUCT_IOC3ENET 	18
+#define KLSTRUCT_IOC3UART 	19
+#define KLSTRUCT_UNUSED		20 /* XXX UNUSED */
+#define KLSTRUCT_IOC3PCKM       21
+#define KLSTRUCT_RAD        	22
+#define KLSTRUCT_HUB_TTY        23
+#define KLSTRUCT_IOC3_TTY 	24
+
+/* Early Access IO proms are compatible
+   only with KLSTRUCT values upto 24. */
+
+#define KLSTRUCT_FIBERCHANNEL 	25
+#define KLSTRUCT_MOD_SERIAL_NUM 26
+#define KLSTRUCT_IOC3MS         27
+#define KLSTRUCT_TPU            28
+#define KLSTRUCT_GSN_A          29
+#define KLSTRUCT_GSN_B          30
+#define KLSTRUCT_XTHD           31
+
+/*
+ * These are the indices of various components within a lboard structure.
+ */
+
+#define IP27_CPU0_INDEX 0
+#define IP27_CPU1_INDEX 1
+#define IP27_HUB_INDEX 2
+#define IP27_MEM_INDEX 3
+
+#define BASEIO_BRIDGE_INDEX 0
+#define BASEIO_IOC3_INDEX 1
+#define BASEIO_SCSI1_INDEX 2
+#define BASEIO_SCSI2_INDEX 3
+
+#define MIDPLANE_XBOW_INDEX 0
+#define ROUTER_COMPONENT_INDEX 0
+
+#define CH4SCSI_BRIDGE_INDEX 0
+
+/* Info holders for various hardware components */
+
+typedef u64 *pci_t;
+typedef u64 *vmeb_t;
+typedef u64 *vmed_t;
+typedef u64 *fddi_t;
+typedef u64 *scsi_t;
+typedef u64 *mio_t;
+typedef u64 *graphics_t;
+typedef u64 *router_t;
+
+/*
+ * The port info in ip27_cfg area translates to a lboart_t in the
+ * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t
+ * is stored in terms of a nasid and a offset from start of KLCONFIG
+ * area  on that nasid.
+ */
+typedef struct klport_s {
+	nasid_t		port_nasid;
+	unsigned char	port_flag;
+	klconf_off_t	port_offset;
+} klport_t;
+
+typedef struct klcpu_s {                          /* CPU */
+	klinfo_t 	cpu_info;
+	unsigned short 	cpu_prid;	/* Processor PRID value */
+	unsigned short 	cpu_fpirr;	/* FPU IRR value */
+	unsigned short 	cpu_speed;	/* Speed in MHZ */
+	unsigned short 	cpu_scachesz;	/* secondary cache size in MB */
+	unsigned short 	cpu_scachespeed;/* secondary cache speed in MHz */
+} klcpu_t ;
+
+#define CPU_STRUCT_VERSION   2
+
+typedef struct klhub_s {			/* HUB */
+	klinfo_t 	hub_info;
+	unsigned int 		hub_flags;		/* PCFG_HUB_xxx flags */
+	klport_t	hub_port;		/* hub is connected to this */
+	nic_t		hub_box_nic;		/* nic of containing box */
+	klconf_off_t	hub_mfg_nic;		/* MFG NIC string */
+	u64		hub_speed;		/* Speed of hub in HZ */
+} klhub_t ;
+
+typedef struct klhub_uart_s {			/* HUB */
+	klinfo_t 	hubuart_info;
+	unsigned int 		hubuart_flags;		/* PCFG_HUB_xxx flags */
+	nic_t		hubuart_box_nic;	/* nic of containing box */
+} klhub_uart_t ;
+
+#define MEMORY_STRUCT_VERSION   2
+
+typedef struct klmembnk_s {			/* MEMORY BANK */
+	klinfo_t 	membnk_info;
+	short 		membnk_memsz;		/* Total memory in megabytes */
+	short		membnk_dimm_select; /* bank to physical addr mapping*/
+	short		membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */
+	short		membnk_attr;
+} klmembnk_t ;
+
+#define KLCONFIG_MEMBNK_SIZE(_info, _bank)	\
+                            ((_info)->membnk_bnksz[(_bank)])
+
+
+#define MEMBNK_PREMIUM 1
+#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank)	\
+                            ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
+
+#define MAX_SERIAL_NUM_SIZE 10
+
+typedef struct klmod_serial_num_s {
+      klinfo_t        snum_info;
+      union {
+              char snum_str[MAX_SERIAL_NUM_SIZE];
+              unsigned long long       snum_int;
+      } snum;
+} klmod_serial_num_t;
+
+/* Macros needed to access serial number structure in lboard_t.
+   Hard coded values are necessary since we cannot treat
+   serial number struct as a component without losing compatibility
+   between prom versions. */
+
+#define GET_SNUM_COMP(_l) 	((klmod_serial_num_t *)\
+				KLCF_COMP(_l, _l->brd_numcompts))
+
+#define MAX_XBOW_LINKS 16
+
+typedef struct klxbow_s {                          /* XBOW */
+	klinfo_t 	xbow_info ;
+	klport_t	xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */
+        int		xbow_master_hub_link;
+        /* type of brd connected+component struct ptr+flags */
+} klxbow_t ;
+
+#define MAX_PCI_SLOTS 8
+
+typedef struct klpci_device_s {
+	s32	pci_device_id;	/* 32 bits of vendor/device ID. */
+	s32	pci_device_pad;	/* 32 bits of padding. */
+} klpci_device_t;
+
+#define BRIDGE_STRUCT_VERSION	2
+
+typedef struct klbri_s {                          /* BRIDGE */
+	klinfo_t 	bri_info ;
+	unsigned char	bri_eprominfo ;    /* IO6prom connected to bridge */
+	unsigned char	bri_bustype ;      /* PCI/VME BUS bridge/GIO */
+	pci_t    	pci_specific  ;    /* PCI Board config info */
+	klpci_device_t	bri_devices[MAX_PCI_DEVS] ;	/* PCI IDs */
+	klconf_off_t	bri_mfg_nic ;
+} klbri_t ;
+
+#define MAX_IOC3_TTY	2
+
+typedef struct klioc3_s {                          /* IOC3 */
+	klinfo_t 	ioc3_info ;
+	unsigned char	ioc3_ssram ;        /* Info about ssram */
+	unsigned char	ioc3_nvram ;        /* Info about nvram */
+	klinfo_t	ioc3_superio ;      /* Info about superio */
+	klconf_off_t	ioc3_tty_off ;
+	klinfo_t	ioc3_enet ;
+	klconf_off_t	ioc3_enet_off ;
+	klconf_off_t	ioc3_kbd_off ;
+} klioc3_t ;
+
+#define MAX_VME_SLOTS 8
+
+typedef struct klvmeb_s {                          /* VME BRIDGE - PCI CTLR */
+	klinfo_t 	vmeb_info ;
+	vmeb_t		vmeb_specific ;
+	klconf_off_t   	vmeb_brdinfo[MAX_VME_SLOTS]   ;    /* VME Board config info */
+} klvmeb_t ;
+
+typedef struct klvmed_s {                          /* VME DEVICE - VME BOARD */
+	klinfo_t	vmed_info ;
+	vmed_t		vmed_specific ;
+	klconf_off_t   	vmed_brdinfo[MAX_VME_SLOTS]   ;    /* VME Board config info */
+} klvmed_t ;
+
+#define ROUTER_VECTOR_VERS	2
+
+/* XXX - Don't we need the number of ports here?!? */
+typedef struct klrou_s {                          /* ROUTER */
+	klinfo_t 	rou_info ;
+	unsigned int		rou_flags ;           /* PCFG_ROUTER_xxx flags */
+	nic_t		rou_box_nic ;         /* nic of the containing module */
+	klport_t 	rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
+	klconf_off_t	rou_mfg_nic ;     /* MFG NIC string */
+	u64	rou_vector;	  /* vector from master node */
+} klrou_t ;
+
+/*
+ *  Graphics Controller/Device
+ *
+ *  (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier
+ *  used a couple different structures to store graphics information.
+ *  For compatibility reasons, the newer data structure preserves some
+ *  of the layout so that fields that are used in the old versions remain
+ *  in the same place (with the same info).  Determination of what version
+ *  of this structure we have is done by checking the cookie field.
+ */
+#define KLGFX_COOKIE	0x0c0de000
+
+typedef struct klgfx_s {		/* GRAPHICS Device */
+	klinfo_t 	gfx_info;
+	klconf_off_t    old_gndevs;	/* for compatibility with older proms */
+	klconf_off_t    old_gdoff0;	/* for compatibility with older proms */
+	unsigned int		cookie;		/* for compatibility with older proms */
+	unsigned int		moduleslot;
+	struct klgfx_s	*gfx_next_pipe;
+	graphics_t	gfx_specific;
+	klconf_off_t    pad0;		/* for compatibility with older proms */
+	klconf_off_t    gfx_mfg_nic;
+} klgfx_t;
+
+typedef struct klxthd_s {
+	klinfo_t 	xthd_info ;
+	klconf_off_t	xthd_mfg_nic ;        /* MFG NIC string */
+} klxthd_t ;
+
+typedef struct kltpu_s {                     /* TPU board */
+	klinfo_t 	tpu_info ;
+	klconf_off_t	tpu_mfg_nic ;        /* MFG NIC string */
+} kltpu_t ;
+
+typedef struct klgsn_s {                     /* GSN board */
+	klinfo_t 	gsn_info ;
+	klconf_off_t	gsn_mfg_nic ;        /* MFG NIC string */
+} klgsn_t ;
+
+#define MAX_SCSI_DEVS 16
+
+/*
+ * NOTE: THis is the max sized kl* structure and is used in klmalloc.c
+ * to allocate space of type COMPONENT. Make sure that if the size of
+ * any other component struct becomes more than this, then redefine
+ * that as the size to be klmalloced.
+ */
+
+typedef struct klscsi_s {                          /* SCSI Controller */
+	klinfo_t 	scsi_info ;
+	scsi_t       	scsi_specific   ;
+	unsigned char 	scsi_numdevs ;
+	klconf_off_t	scsi_devinfo[MAX_SCSI_DEVS] ;
+} klscsi_t ;
+
+typedef struct klscdev_s {                          /* SCSI device */
+	klinfo_t 	scdev_info ;
+	struct scsidisk_data *scdev_cfg ; /* driver fills up this */
+} klscdev_t ;
+
+typedef struct klttydev_s {                          /* TTY device */
+	klinfo_t 	ttydev_info ;
+	struct terminal_data *ttydev_cfg ; /* driver fills up this */
+} klttydev_t ;
+
+typedef struct klenetdev_s {                          /* ENET device */
+	klinfo_t 	enetdev_info ;
+	struct net_data *enetdev_cfg ; /* driver fills up this */
+} klenetdev_t ;
+
+typedef struct klkbddev_s {                          /* KBD device */
+	klinfo_t 	kbddev_info ;
+	struct keyboard_data *kbddev_cfg ; /* driver fills up this */
+} klkbddev_t ;
+
+typedef struct klmsdev_s {                          /* mouse device */
+        klinfo_t        msdev_info ;
+        void 		*msdev_cfg ;
+} klmsdev_t ;
+
+#define MAX_FDDI_DEVS 10 /* XXX Is this true */
+
+typedef struct klfddi_s {                          /* FDDI */
+	klinfo_t 	fddi_info ;
+	fddi_t        	fddi_specific ;
+	klconf_off_t	fddi_devinfo[MAX_FDDI_DEVS] ;
+} klfddi_t ;
+
+typedef struct klmio_s {                          /* MIO */
+	klinfo_t 	mio_info ;
+	mio_t       	mio_specific   ;
+} klmio_t ;
+
+
+typedef union klcomp_s {
+	klcpu_t		kc_cpu;
+	klhub_t		kc_hub;
+	klmembnk_t 	kc_mem;
+	klxbow_t  	kc_xbow;
+	klbri_t		kc_bri;
+	klioc3_t	kc_ioc3;
+	klvmeb_t	kc_vmeb;
+	klvmed_t	kc_vmed;
+	klrou_t		kc_rou;
+	klgfx_t		kc_gfx;
+	klscsi_t	kc_scsi;
+	klscdev_t	kc_scsi_dev;
+	klfddi_t	kc_fddi;
+	klmio_t		kc_mio;
+	klmod_serial_num_t kc_snum ;
+} klcomp_t;
+
+typedef union kldev_s {      /* for device structure allocation */
+	klscdev_t	kc_scsi_dev ;
+	klttydev_t	kc_tty_dev ;
+	klenetdev_t	kc_enet_dev ;
+	klkbddev_t 	kc_kbd_dev ;
+} kldev_t ;
+
+/* Data structure interface routines. TBD */
+
+/* Include launch info in this file itself? TBD */
+
+/*
+ * TBD - Can the ARCS and device driver related info also be included in the
+ * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t
+ * structure, viz private to the IO4prom.
+ */
+
+/*
+ * TBD - Allocation issues.
+ *
+ * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
+ * errinfo and allocate from them, or have a single heap and allocate all
+ * structures from it. Debug is easier in the former method since we can
+ * dump all similar structs in one command, but there will be lots of holes,
+ * in memory and max limits are needed for number of structures.
+ * Another way to make it organized, is to have a union of all components
+ * and allocate a aligned chunk of memory greater than the biggest
+ * component.
+ */
+
+typedef union {
+	lboard_t *lbinfo ;
+} biptr_t ;
+
+
+#define BRI_PER_XBOW 6
+#define PCI_PER_BRI  8
+#define DEV_PER_PCI  16
+
+
+/* Virtual dipswitch values (starting from switch "7"): */
+
+#define VDS_NOGFX		0x8000	/* Don't enable gfx and autoboot */
+#define VDS_NOMP		0x100	/* Don't start slave processors */
+#define VDS_MANUMODE		0x80	/* Manufacturing mode */
+#define VDS_NOARB		0x40	/* No bootmaster arbitration */
+#define VDS_PODMODE		0x20	/* Go straight to POD mode */
+#define VDS_NO_DIAGS		0x10	/* Don't run any diags after BM arb */
+#define VDS_DEFAULTS		0x08	/* Use default environment values */
+#define VDS_NOMEMCLEAR		0x04	/* Don't run mem cfg code */
+#define VDS_2ND_IO4		0x02	/* Boot from the second IO4 */
+#define VDS_DEBUG_PROM		0x01	/* Print PROM debugging messages */
+
+/* external declarations of Linux kernel functions. */
+
+extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
+extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
+extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
+extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int);
+extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
+
+
+extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu);
+
+#endif /* _ASM_SN_KLCONFIG_H */
diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h
new file mode 100644
index 0000000..1327e12
--- /dev/null
+++ b/arch/mips/include/asm/sn/kldir.h
@@ -0,0 +1,217 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/kldir.h>, revision 1.21.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_KLDIR_H
+#define _ASM_SN_KLDIR_H
+
+
+/*
+ * The kldir memory area resides at a fixed place in each node's memory and
+ * provides pointers to most other IP27 memory areas.  This allows us to
+ * resize and/or relocate memory areas at a later time without breaking all
+ * firmware and kernels that use them.  Indices in the array are
+ * permanently dedicated to areas listed below.  Some memory areas (marked
+ * below) reside at a permanently fixed location, but are included in the
+ * directory for completeness.
+ */
+
+#define KLDIR_MAGIC		0x434d5f53505f5357
+
+/*
+ * The upper portion of the memory map applies during boot
+ * only and is overwritten by IRIX/SYMMON.
+ *
+ *                                    MEMORY MAP PER NODE
+ *
+ * 0x2000000 (32M)         +-----------------------------------------+
+ *                         |      IO6 BUFFERS FOR FLASH ENET IOC3    |
+ * 0x1F80000 (31.5M)       +-----------------------------------------+
+ *                         |      IO6 TEXT/DATA/BSS/stack            |
+ * 0x1C00000 (30M)         +-----------------------------------------+
+ *                         |      IO6 PROM DEBUG TEXT/DATA/BSS/stack |
+ * 0x0800000 (28M)         +-----------------------------------------+
+ *                         |      IP27 PROM TEXT/DATA/BSS/stack      |
+ * 0x1B00000 (27M)         +-----------------------------------------+
+ *                         |      IP27 CFG                           |
+ * 0x1A00000 (26M)         +-----------------------------------------+
+ *                         |      Graphics PROM                      |
+ * 0x1800000 (24M)         +-----------------------------------------+
+ *                         |      3rd Party PROM drivers             |
+ * 0x1600000 (22M)         +-----------------------------------------+
+ *                         |                                         |
+ *                         |      Free                               |
+ *                         |                                         |
+ *                         +-----------------------------------------+
+ *                         |      UNIX DEBUG Version                 |
+ * 0x190000 (2M--)         +-----------------------------------------+
+ *                         |      SYMMON                             |
+ *                         |      (For UNIX Debug only)              |
+ * 0x34000 (208K)          +-----------------------------------------+
+ *                         |      SYMMON STACK [NUM_CPU_PER_NODE]    |
+ *                         |      (For UNIX Debug only)              |
+ * 0x25000 (148K)          +-----------------------------------------+
+ *                         |      KLCONFIG - II (temp)               |
+ *                         |                                         |
+ *                         |    ----------------------------         |
+ *                         |                                         |
+ *                         |      UNIX NON-DEBUG Version             |
+ * 0x19000 (100K)          +-----------------------------------------+
+ *
+ *
+ * The lower portion of the memory map contains information that is
+ * permanent and is used by the IP27PROM, IO6PROM and IRIX.
+ *
+ * 0x19000 (100K)          +-----------------------------------------+
+ *                         |                                         |
+ *                         |      PI Error Spools (32K)              |
+ *                         |                                         |
+ * 0x12000 (72K)           +-----------------------------------------+
+ *                         |      Unused                             |
+ * 0x11c00 (71K)           +-----------------------------------------+
+ *                         |      CPU 1 NMI Eframe area       	     |
+ * 0x11a00 (70.5K)         +-----------------------------------------+
+ *                         |      CPU 0 NMI Eframe area       	     |
+ * 0x11800 (70K)           +-----------------------------------------+
+ *                         |      CPU 1 NMI Register save area       |
+ * 0x11600 (69.5K)         +-----------------------------------------+
+ *                         |      CPU 0 NMI Register save area       |
+ * 0x11400 (69K)           +-----------------------------------------+
+ *                         |      GDA (1k)                           |
+ * 0x11000 (68K)           +-----------------------------------------+
+ *                         |      Early cache Exception stack        |
+ *                         |             and/or                      |
+ *			   |      kernel/io6prom nmi registers	     |
+ * 0x10800  (66k)	   +-----------------------------------------+
+ *			   |      cache error eframe   	 	     |
+ * 0x10400 (65K)           +-----------------------------------------+
+ *                         |      Exception Handlers (UALIAS copy)   |
+ * 0x10000 (64K)           +-----------------------------------------+
+ *                         |                                         |
+ *                         |                                         |
+ *                         |      KLCONFIG - I (permanent) (48K)     |
+ *                         |                                         |
+ *                         |                                         |
+ *                         |                                         |
+ * 0x4000 (16K)            +-----------------------------------------+
+ *                         |      NMI Handler (Protected Page)       |
+ * 0x3000 (12K)            +-----------------------------------------+
+ *                         |      ARCS PVECTORS (master node only)   |
+ * 0x2c00 (11K)            +-----------------------------------------+
+ *                         |      ARCS TVECTORS (master node only)   |
+ * 0x2800 (10K)            +-----------------------------------------+
+ *                         |      LAUNCH [NUM_CPU]                   |
+ * 0x2400 (9K)             +-----------------------------------------+
+ *                         |      Low memory directory (KLDIR)       |
+ * 0x2000 (8K)             +-----------------------------------------+
+ *                         |      ARCS SPB (1K)                      |
+ * 0x1000 (4K)             +-----------------------------------------+
+ *                         |      Early cache Exception stack        |
+ *                         |             and/or                      |
+ *			   |      kernel/io6prom nmi registers	     |
+ * 0x800  (2k)	           +-----------------------------------------+
+ *			   |      cache error eframe   	 	     |
+ * 0x400 (1K)              +-----------------------------------------+
+ *                         |      Exception Handlers                 |
+ * 0x0   (0K)              +-----------------------------------------+
+ */
+
+#ifdef __ASSEMBLY__
+#define KLDIR_OFF_MAGIC			0x00
+#define KLDIR_OFF_OFFSET		0x08
+#define KLDIR_OFF_POINTER		0x10
+#define KLDIR_OFF_SIZE			0x18
+#define KLDIR_OFF_COUNT			0x20
+#define KLDIR_OFF_STRIDE		0x28
+#endif /* __ASSEMBLY__ */
+
+/*
+ * This is defined here because IP27_SYMMON_STK_SIZE must be at least what
+ * we define here.  Since it's set up in the prom.  We can't redefine it later
+ * and expect more space to be allocated.  The way to find out the true size
+ * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE
+ * for a particular node.
+ */
+#define SYMMON_STACK_SIZE		0x8000
+
+#if defined(PROM)
+
+/*
+ * These defines are prom version dependent.  No code other than the IP27
+ * prom should attempt to use these values.
+ */
+#define IP27_LAUNCH_OFFSET		0x2400
+#define IP27_LAUNCH_SIZE		0x400
+#define IP27_LAUNCH_COUNT		2
+#define IP27_LAUNCH_STRIDE		0x200
+
+#define IP27_KLCONFIG_OFFSET		0x4000
+#define IP27_KLCONFIG_SIZE		0xc000
+#define IP27_KLCONFIG_COUNT		1
+#define IP27_KLCONFIG_STRIDE		0
+
+#define IP27_NMI_OFFSET			0x3000
+#define IP27_NMI_SIZE			0x40
+#define IP27_NMI_COUNT			2
+#define IP27_NMI_STRIDE			0x40
+
+#define IP27_PI_ERROR_OFFSET		0x12000
+#define IP27_PI_ERROR_SIZE		0x4000
+#define IP27_PI_ERROR_COUNT		1
+#define IP27_PI_ERROR_STRIDE		0
+
+#define IP27_SYMMON_STK_OFFSET		0x25000
+#define IP27_SYMMON_STK_SIZE		0xe000
+#define IP27_SYMMON_STK_COUNT		2
+/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */
+#define IP27_SYMMON_STK_STRIDE		0x7000
+
+#define IP27_FREEMEM_OFFSET		0x19000
+#define IP27_FREEMEM_SIZE		-1
+#define IP27_FREEMEM_COUNT		1
+#define IP27_FREEMEM_STRIDE		0
+
+#endif /* PROM */
+/*
+ * There will be only one of these in a partition so the IO6 must set it up.
+ */
+#define IO6_GDA_OFFSET			0x11000
+#define IO6_GDA_SIZE			0x400
+#define IO6_GDA_COUNT			1
+#define IO6_GDA_STRIDE			0
+
+/*
+ * save area of kernel nmi regs in the prom format
+ */
+#define IP27_NMI_KREGS_OFFSET		0x11400
+#define IP27_NMI_KREGS_CPU_SIZE		0x200
+/*
+ * save area of kernel nmi regs in eframe format
+ */
+#define IP27_NMI_EFRAME_OFFSET		0x11800
+#define IP27_NMI_EFRAME_SIZE		0x200
+
+#define KLDIR_ENT_SIZE			0x40
+#define KLDIR_MAX_ENTRIES		(0x400 / 0x40)
+
+#ifndef __ASSEMBLY__
+typedef struct kldir_ent_s {
+	u64		magic;		/* Indicates validity of entry      */
+	off_t		offset;		/* Offset from start of node space  */
+	unsigned long	pointer;	/* Pointer to area in some cases    */
+	size_t		size;		/* Size in bytes 		    */
+	u64		count;		/* Repeat count if array, 1 if not  */
+	size_t		stride;		/* Stride if array, 0 if not        */
+	char		rsvd[16];	/* Pad entry to 0x40 bytes          */
+	/* NOTE: These 16 bytes are used in the Partition KLDIR
+	   entry to store partition info. Refer to klpart.h for this. */
+} kldir_ent_t;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SN_KLDIR_H */
diff --git a/arch/mips/include/asm/sn/klkernvars.h b/arch/mips/include/asm/sn/klkernvars.h
new file mode 100644
index 0000000..5de4c5e
--- /dev/null
+++ b/arch/mips/include/asm/sn/klkernvars.h
@@ -0,0 +1,29 @@
+/*
+ * File ported from IRIX to Linux by Kanoj Sarcar, 06/08/00.
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_KLKERNVARS_H
+#define __ASM_SN_KLKERNVARS_H
+
+#define KV_MAGIC_OFFSET		0x0
+#define KV_RO_NASID_OFFSET	0x4
+#define KV_RW_NASID_OFFSET	0x6
+
+#define KV_MAGIC		0x5f4b565f
+
+#ifndef __ASSEMBLY__
+
+#include <asm/sn/types.h>
+
+typedef struct kern_vars_s {
+	int		kv_magic;
+	nasid_t		kv_ro_nasid;
+	nasid_t		kv_rw_nasid;
+	unsigned long	kv_ro_baseaddr;
+	unsigned long	kv_rw_baseaddr;
+} kern_vars_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_SN_KLKERNVARS_H */
+
diff --git a/arch/mips/include/asm/sn/launch.h b/arch/mips/include/asm/sn/launch.h
new file mode 100644
index 0000000..b7c2226
--- /dev/null
+++ b/arch/mips/include/asm/sn/launch.h
@@ -0,0 +1,106 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2000 by Colin Ngam
+ */
+#ifndef _ASM_SN_LAUNCH_H
+#define _ASM_SN_LAUNCH_H
+
+#include <asm/sn/types.h>
+#include <asm/sn/addrs.h>
+
+/*
+ * The launch data structure resides at a fixed place in each node's memory
+ * and is used to communicate between the master processor and the slave
+ * processors.
+ *
+ * The master stores launch parameters in the launch structure
+ * corresponding to a target processor that is in a slave loop, then sends
+ * an interrupt to the slave processor.  The slave calls the desired
+ * function, then returns to the slave loop.  The master may poll or wait
+ * for the slaves to finish.
+ *
+ * There is an array of launch structures, one per CPU on the node.  One
+ * interrupt level is used per local CPU.
+ */
+
+#define LAUNCH_MAGIC		0xaddbead2addbead3
+#ifdef CONFIG_SGI_IP27
+#define LAUNCH_SIZEOF		0x100
+#define LAUNCH_PADSZ		0xa0
+#endif
+
+#define LAUNCH_OFF_MAGIC	0x00	/* Struct offsets for assembly      */
+#define LAUNCH_OFF_BUSY		0x08
+#define LAUNCH_OFF_CALL		0x10
+#define LAUNCH_OFF_CALLC	0x18
+#define LAUNCH_OFF_CALLPARM	0x20
+#define LAUNCH_OFF_STACK	0x28
+#define LAUNCH_OFF_GP		0x30
+#define LAUNCH_OFF_BEVUTLB	0x38
+#define LAUNCH_OFF_BEVNORMAL	0x40
+#define LAUNCH_OFF_BEVECC	0x48
+
+#define LAUNCH_STATE_DONE	0	/* Return value of LAUNCH_POLL      */
+#define LAUNCH_STATE_SENT	1
+#define LAUNCH_STATE_RECD	2
+
+/*
+ * The launch routine is called only if the complement address is correct.
+ *
+ * Before control is transferred to a routine, the complement address
+ * is zeroed (invalidated) to prevent an accidental call from a spurious
+ * interrupt.
+ *
+ * The slave_launch routine turns on the BUSY flag, and the slave loop
+ * clears the BUSY flag after control is returned to it.
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef int launch_state_t;
+typedef void (*launch_proc_t)(u64 call_parm);
+
+typedef struct launch_s {
+	volatile u64		magic;	/* Magic number                     */
+	volatile u64		busy;	/* Slave currently active           */
+	volatile launch_proc_t	call_addr;	/* Func. for slave to call  */
+	volatile u64		call_addr_c;	/* 1's complement of call_addr*/
+	volatile u64		call_parm;	/* Single parm passed to call*/
+	volatile void *stack_addr;	/* Stack pointer for slave function */
+	volatile void *gp_addr;		/* Global pointer for slave func.   */
+	volatile char 		*bevutlb;/* Address of bev utlb ex handler   */
+	volatile char 		*bevnormal;/*Address of bev normal ex handler */
+	volatile char 		*bevecc;/* Address of bev cache err handler */
+	volatile char		pad[160];	/* Pad to LAUNCH_SIZEOF	    */
+} launch_t;
+
+/*
+ * PROM entry points for launch routines are determined by IPxxprom/start.s
+ */
+
+#define LAUNCH_SLAVE	(*(void (*)(int nasid, int cpu, \
+				    launch_proc_t call_addr, \
+				    u64 call_parm, \
+				    void *stack_addr, \
+				    void *gp_addr)) \
+			 IP27PROM_LAUNCHSLAVE)
+
+#define LAUNCH_WAIT	(*(void (*)(int nasid, int cpu, int timeout_msec)) \
+			 IP27PROM_WAITSLAVE)
+
+#define LAUNCH_POLL	(*(launch_state_t (*)(int nasid, int cpu)) \
+			 IP27PROM_POLLSLAVE)
+
+#define LAUNCH_LOOP	(*(void (*)(void)) \
+			 IP27PROM_SLAVELOOP)
+
+#define LAUNCH_FLASH	(*(void (*)(void)) \
+			 IP27PROM_FLASHLEDS)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SN_LAUNCH_H */
diff --git a/arch/mips/include/asm/sn/mapped_kernel.h b/arch/mips/include/asm/sn/mapped_kernel.h
new file mode 100644
index 0000000..721496a
--- /dev/null
+++ b/arch/mips/include/asm/sn/mapped_kernel.h
@@ -0,0 +1,54 @@
+/*
+ * File created by Kanoj Sarcar 06/06/00.
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_MAPPED_KERNEL_H
+#define __ASM_SN_MAPPED_KERNEL_H
+
+#include <linux/mmzone.h>
+
+/*
+ * Note on how mapped kernels work: the text and data section is
+ * compiled at cksseg segment (LOADADDR = 0xc001c000), and the
+ * init/setup/data section gets a 16M virtual address bump in the
+ * ld.script file (so that tlblo0 and tlblo1 maps the sections).
+ * The vmlinux.64 section addresses are put in the xkseg range
+ * using the change-addresses makefile option. Use elfdump -of
+ * on IRIX to see where the sections go. The Origin loader loads
+ * the two sections contiguously in physical memory. The loader
+ * sets the entry point into kernel_entry using a xkphys address,
+ * but instead of using 0xa800000001160000, it uses the address
+ * 0xa800000000160000, which is where it physically loaded that
+ * code. So no jumps can be done before we have switched to using
+ * cksseg addresses.
+ */
+#include <asm/addrspace.h>
+
+#define REP_BASE	CAC_BASE
+
+#ifdef CONFIG_MAPPED_KERNEL
+
+#define MAPPED_ADDR_RO_TO_PHYS(x)	(x - REP_BASE)
+#define MAPPED_ADDR_RW_TO_PHYS(x)	(x - REP_BASE - 16777216)
+
+#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr)
+#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr)
+
+#define MAPPED_KERN_RO_TO_PHYS(x) \
+				((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \
+				MAPPED_KERN_RO_PHYSBASE(get_compact_nodeid()))
+#define MAPPED_KERN_RW_TO_PHYS(x) \
+				((unsigned long)MAPPED_ADDR_RW_TO_PHYS(x) | \
+				MAPPED_KERN_RW_PHYSBASE(get_compact_nodeid()))
+
+#else /* CONFIG_MAPPED_KERNEL */
+
+#define MAPPED_KERN_RO_TO_PHYS(x)	(x - REP_BASE)
+#define MAPPED_KERN_RW_TO_PHYS(x)	(x - REP_BASE)
+
+#endif /* CONFIG_MAPPED_KERNEL */
+
+#define MAPPED_KERN_RO_TO_K0(x)	PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x))
+#define MAPPED_KERN_RW_TO_K0(x)	PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x))
+
+#endif /* __ASM_SN_MAPPED_KERNEL_H  */
diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h
new file mode 100644
index 0000000..6b7b0b5
--- /dev/null
+++ b/arch/mips/include/asm/sn/nmi.h
@@ -0,0 +1,125 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_NMI_H
+#define __ASM_SN_NMI_H
+
+#ident "$Revision: 1.5 $"
+
+#include <asm/sn/addrs.h>
+
+/*
+ * The launch data structure resides at a fixed place in each node's memory
+ * and is used to communicate between the master processor and the slave
+ * processors.
+ *
+ * The master stores launch parameters in the launch structure
+ * corresponding to a target processor that is in a slave loop, then sends
+ * an interrupt to the slave processor.  The slave calls the desired
+ * function, followed by an optional rendezvous function, then returns to
+ * the slave loop.  The master does not wait for the slaves before
+ * returning.
+ *
+ * There is an array of launch structures, one per CPU on the node.  One
+ * interrupt level is used per CPU.
+ */
+
+#define NMI_MAGIC		0x48414d4d455201
+#define NMI_SIZEOF		0x40
+
+#define NMI_OFF_MAGIC		0x00	/* Struct offsets for assembly      */
+#define NMI_OFF_FLAGS		0x08
+#define NMI_OFF_CALL		0x10
+#define NMI_OFF_CALLC		0x18
+#define NMI_OFF_CALLPARM	0x20
+#define NMI_OFF_GMASTER		0x28
+
+/*
+ * The NMI routine is called only if the complement address is
+ * correct.
+ *
+ * Before control is transferred to a routine, the complement address
+ * is zeroed (invalidated) to prevent an accidental call from a spurious
+ * interrupt.
+ *
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef struct nmi_s {
+	volatile unsigned long	 magic;		/* Magic number */
+	volatile unsigned long	 flags;		/* Combination of flags above */
+	volatile void *call_addr;	/* Routine for slave to call        */
+	volatile void *call_addr_c;	/* 1's complement of address        */
+	volatile void *call_parm;	/* Single parm passed to call	    */
+	volatile unsigned long	 gmaster;	/* Flag true only on global master*/
+} nmi_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/* Following definitions are needed both in the prom & the kernel
+ * to identify the format of the nmi cpu register save area in the
+ * low memory on each node.
+ */
+#ifndef __ASSEMBLY__
+
+struct reg_struct {
+	unsigned long	gpr[32];
+	unsigned long	sr;
+	unsigned long	cause;
+	unsigned long	epc;
+	unsigned long	badva;
+	unsigned long	error_epc;
+	unsigned long	cache_err;
+	unsigned long	nmi_sr;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* These are the assembly language offsets into the reg_struct structure */
+
+#define R0_OFF		0x0
+#define R1_OFF		0x8
+#define R2_OFF		0x10
+#define R3_OFF		0x18
+#define R4_OFF		0x20
+#define R5_OFF		0x28
+#define R6_OFF		0x30
+#define R7_OFF		0x38
+#define R8_OFF		0x40
+#define R9_OFF		0x48
+#define R10_OFF		0x50
+#define R11_OFF		0x58
+#define R12_OFF		0x60
+#define R13_OFF		0x68
+#define R14_OFF		0x70
+#define R15_OFF		0x78
+#define R16_OFF		0x80
+#define R17_OFF		0x88
+#define R18_OFF		0x90
+#define R19_OFF		0x98
+#define R20_OFF		0xa0
+#define R21_OFF		0xa8
+#define R22_OFF		0xb0
+#define R23_OFF		0xb8
+#define R24_OFF		0xc0
+#define R25_OFF		0xc8
+#define R26_OFF		0xd0
+#define R27_OFF		0xd8
+#define R28_OFF		0xe0
+#define R29_OFF		0xe8
+#define R30_OFF		0xf0
+#define R31_OFF		0xf8
+#define SR_OFF		0x100
+#define CAUSE_OFF	0x108
+#define EPC_OFF		0x110
+#define BADVA_OFF	0x118
+#define ERROR_EPC_OFF	0x120
+#define CACHE_ERR_OFF	0x128
+#define NMISR_OFF	0x130
+
+#endif /* __ASM_SN_NMI_H */
diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h
new file mode 100644
index 0000000..b061900
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/addrs.h
@@ -0,0 +1,288 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/addrs.h>, revision 1.126.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_ADDRS_H
+#define _ASM_SN_SN0_ADDRS_H
+
+
+/*
+ * SN0 (on a T5) Address map
+ *
+ * This file contains a set of definitions and macros which are used
+ * to reference into the major address spaces (CAC, HSPEC, IO, MSPEC,
+ * and UNCAC) used by the SN0 architecture.  It also contains addresses
+ * for "major" statically locatable PROM/Kernel data structures, such as
+ * the partition table, the configuration data structure, etc.
+ * We make an implicit assumption that the processor using this file
+ * follows the R10K's provisions for specifying uncached attributes;
+ * should this change, the base registers may very well become processor-
+ * dependent.
+ *
+ * For more information on the address spaces, see the "Local Resources"
+ * chapter of the Hub specification.
+ *
+ * NOTE: This header file is included both by C and by assembler source
+ *	 files.  Please bracket any language-dependent definitions
+ *	 appropriately.
+ */
+
+/*
+ * Some of the macros here need to be casted to appropriate types when used
+ * from C.  They definitely must not be casted from assembly language so we
+ * use some new ANSI preprocessor stuff to paste these on where needed.
+ */
+
+/*
+ * The following couple of definitions will eventually need to be variables,
+ * since the amount of address space assigned to each node depends on
+ * whether the system is running in N-mode (more nodes with less memory)
+ * or M-mode (fewer nodes with more memory).  We expect that it will
+ * be a while before we need to make this decision dynamically, though,
+ * so for now we just use defines bracketed by an ifdef.
+ */
+
+#ifdef CONFIG_SGI_SN_N_MODE
+
+#define NODE_SIZE_BITS		31
+#define BWIN_SIZE_BITS		28
+
+#define NASID_BITS		9
+#define NASID_BITMASK		(0x1ffLL)
+#define NASID_SHFT		31
+#define NASID_META_BITS		5
+#define NASID_LOCAL_BITS	4
+
+#define BDDIR_UPPER_MASK	(UINT64_CAST 0x7ffff << 10)
+#define BDECC_UPPER_MASK	(UINT64_CAST 0x3ffffff << 3)
+
+#else /* !defined(CONFIG_SGI_SN_N_MODE), assume that M-mode is desired */
+
+#define NODE_SIZE_BITS		32
+#define BWIN_SIZE_BITS		29
+
+#define NASID_BITMASK		(0xffLL)
+#define NASID_BITS		8
+#define NASID_SHFT		32
+#define NASID_META_BITS		4
+#define NASID_LOCAL_BITS	4
+
+#define BDDIR_UPPER_MASK	(UINT64_CAST 0xfffff << 10)
+#define BDECC_UPPER_MASK	(UINT64_CAST 0x7ffffff << 3)
+
+#endif /* !defined(CONFIG_SGI_SN_N_MODE) */
+
+#define NODE_ADDRSPACE_SIZE	(UINT64_CAST 1 << NODE_SIZE_BITS)
+
+#define NASID_MASK		(UINT64_CAST NASID_BITMASK << NASID_SHFT)
+#define NASID_GET(_pa)		(int) ((UINT64_CAST (_pa) >>		\
+					NASID_SHFT) & NASID_BITMASK)
+
+#if !defined(__ASSEMBLY__)
+
+#define NODE_SWIN_BASE(nasid, widget)					\
+	((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN)		\
+	: RAW_NODE_SWIN_BASE(nasid, widget))
+#else /* __ASSEMBLY__ */
+#define NODE_SWIN_BASE(nasid, widget) \
+     (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS))
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define BWIN_INDEX_BITS		3
+#define BWIN_SIZE		(UINT64_CAST 1 << BWIN_SIZE_BITS)
+#define	BWIN_SIZEMASK		(BWIN_SIZE - 1)
+#define	BWIN_WIDGET_MASK	0x7
+#define NODE_BWIN_BASE0(nasid)	(NODE_IO_BASE(nasid) + BWIN_SIZE)
+#define NODE_BWIN_BASE(nasid, bigwin)	(NODE_BWIN_BASE0(nasid) + 	\
+			(UINT64_CAST(bigwin) << BWIN_SIZE_BITS))
+
+#define	BWIN_WIDGETADDR(addr)	((addr) & BWIN_SIZEMASK)
+#define	BWIN_WINDOWNUM(addr)	(((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+/*
+ * Verify if addr belongs to large window address of node with "nasid"
+ *
+ *
+ * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
+ * address
+ *
+ *
+ */
+
+#define	NODE_BWIN_ADDR(nasid, addr)	\
+		(((addr) >= NODE_BWIN_BASE0(nasid)) && \
+		 ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \
+				BWIN_SIZE)))
+
+/*
+ * The following define the major position-independent aliases used
+ * in SN0.
+ *	CALIAS -- Varies in size, points to the first n bytes of memory
+ *		  	on the reader's node.
+ */
+
+#define CALIAS_BASE		CAC_BASE
+
+
+
+#define BRIDGE_REG_PTR(_base, _off)	((volatile bridgereg_t *) \
+	((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
+
+#define SN0_WIDGET_BASE(_nasid, _wid)	(NODE_SWIN_BASE((_nasid), (_wid)))
+
+/* Turn on sable logging for the processors whose bits are set. */
+#define SABLE_LOG_TRIGGER(_map)
+
+#ifndef __ASSEMBLY__
+#define KERN_NMI_ADDR(nasid, slice)					\
+                    TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + 	\
+				  (IP27_NMI_KREGS_CPU_SIZE * (slice)))
+#endif /* !__ASSEMBLY__ */
+
+#ifdef PROM
+
+#define MISC_PROM_BASE		PHYS_TO_K0(0x01300000)
+#define MISC_PROM_SIZE		0x200000
+
+#define DIAG_BASE		PHYS_TO_K0(0x01500000)
+#define DIAG_SIZE		0x300000
+
+#define ROUTE_BASE		PHYS_TO_K0(0x01800000)
+#define ROUTE_SIZE		0x200000
+
+#define IP27PROM_FLASH_HDR	PHYS_TO_K0(0x01300000)
+#define IP27PROM_FLASH_DATA	PHYS_TO_K0(0x01301000)
+#define IP27PROM_CORP_MAX	32
+#define IP27PROM_CORP		PHYS_TO_K0(0x01800000)
+#define IP27PROM_CORP_SIZE	0x10000
+#define IP27PROM_CORP_STK	PHYS_TO_K0(0x01810000)
+#define IP27PROM_CORP_STKSIZE	0x2000
+#define IP27PROM_DECOMP_BUF	PHYS_TO_K0(0x01900000)
+#define IP27PROM_DECOMP_SIZE	0xfff00
+
+#define IP27PROM_BASE		PHYS_TO_K0(0x01a00000)
+#define IP27PROM_BASE_MAPPED	(UNCAC_BASE | 0x1fc00000)
+#define IP27PROM_SIZE_MAX	0x100000
+
+#define IP27PROM_PCFG		PHYS_TO_K0(0x01b00000)
+#define IP27PROM_PCFG_SIZE	0xd0000
+#define IP27PROM_ERRDMP		PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_ERRDMP_SIZE	0xf000
+
+#define IP27PROM_INIT_START	PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_CONSOLE	PHYS_TO_K1(0x01bdf000)
+#define IP27PROM_CONSOLE_SIZE	0x200
+#define IP27PROM_NETUART	PHYS_TO_K1(0x01bdf200)
+#define IP27PROM_NETUART_SIZE	0x100
+#define IP27PROM_UNUSED1	PHYS_TO_K1(0x01bdf300)
+#define IP27PROM_UNUSED1_SIZE	0x500
+#define IP27PROM_ELSC_BASE_A	PHYS_TO_K0(0x01bdf800)
+#define IP27PROM_ELSC_BASE_B	PHYS_TO_K0(0x01bdfc00)
+#define IP27PROM_STACK_A	PHYS_TO_K0(0x01be0000)
+#define IP27PROM_STACK_B	PHYS_TO_K0(0x01bf0000)
+#define IP27PROM_STACK_SHFT	16
+#define IP27PROM_STACK_SIZE	(1 << IP27PROM_STACK_SHFT)
+#define IP27PROM_INIT_END	PHYS_TO_K0(0x01c00000)
+
+#define SLAVESTACK_BASE		PHYS_TO_K0(0x01580000)
+#define SLAVESTACK_SIZE		0x40000
+
+#define ENETBUFS_BASE		PHYS_TO_K0(0x01f80000)
+#define ENETBUFS_SIZE		0x20000
+
+#define IO6PROM_BASE		PHYS_TO_K0(0x01c00000)
+#define IO6PROM_SIZE		0x400000
+#define	IO6PROM_BASE_MAPPED	(UNCAC_BASE | 0x11c00000)
+#define IO6DPROM_BASE		PHYS_TO_K0(0x01c00000)
+#define IO6DPROM_SIZE		0x200000
+
+#define NODEBUGUNIX_ADDR	PHYS_TO_K0(0x00019000)
+#define DEBUGUNIX_ADDR		PHYS_TO_K0(0x00100000)
+
+#define IP27PROM_INT_LAUNCH	10	/* and 11 */
+#define IP27PROM_INT_NETUART	12	/* through 17 */
+
+#endif /* PROM */
+
+/*
+ * needed by symmon so it needs to be outside #if PROM
+ */
+#define IP27PROM_ELSC_SHFT	10
+#define IP27PROM_ELSC_SIZE	(1 << IP27PROM_ELSC_SHFT)
+
+/*
+ * This address is used by IO6PROM to build MemoryDescriptors of
+ * free memory. This address is important since unix gets loaded
+ * at this address, and this memory has to be FREE if unix is to
+ * be loaded.
+ */
+
+#define FREEMEM_BASE		PHYS_TO_K0(0x2000000)
+
+#define IO6PROM_STACK_SHFT	14	/* stack per cpu */
+#define IO6PROM_STACK_SIZE	(1 << IO6PROM_STACK_SHFT)
+
+/*
+ * IP27 PROM vectors
+ */
+
+#define IP27PROM_ENTRY		PHYS_TO_COMPATK1(0x1fc00000)
+#define IP27PROM_RESTART	PHYS_TO_COMPATK1(0x1fc00008)
+#define IP27PROM_SLAVELOOP	PHYS_TO_COMPATK1(0x1fc00010)
+#define IP27PROM_PODMODE	PHYS_TO_COMPATK1(0x1fc00018)
+#define IP27PROM_IOC3UARTPOD	PHYS_TO_COMPATK1(0x1fc00020)
+#define IP27PROM_FLASHLEDS	PHYS_TO_COMPATK1(0x1fc00028)
+#define IP27PROM_REPOD		PHYS_TO_COMPATK1(0x1fc00030)
+#define IP27PROM_LAUNCHSLAVE	PHYS_TO_COMPATK1(0x1fc00038)
+#define IP27PROM_WAITSLAVE	PHYS_TO_COMPATK1(0x1fc00040)
+#define IP27PROM_POLLSLAVE	PHYS_TO_COMPATK1(0x1fc00048)
+
+#define KL_UART_BASE	LOCAL_HUB_ADDR(MD_UREG0_0)	/* base of UART regs */
+#define KL_UART_CMD	LOCAL_HUB_ADDR(MD_UREG0_0)	/* UART command reg */
+#define KL_UART_DATA	LOCAL_HUB_ADDR(MD_UREG0_1)	/* UART data reg */
+#define KL_I2C_REG	MD_UREG0_0			/* I2C reg */
+
+#ifndef __ASSEMBLY__
+
+/* Address 0x400 to 0x1000 ualias points to cache error eframe + misc
+ * CACHE_ERR_SP_PTR could either contain an address to the stack, or
+ * the stack could start at CACHE_ERR_SP_PTR
+ */
+#if defined(HUB_ERR_STS_WAR)
+#define CACHE_ERR_EFRAME	0x480
+#else /* HUB_ERR_STS_WAR */
+#define CACHE_ERR_EFRAME	0x400
+#endif /* HUB_ERR_STS_WAR */
+
+#define CACHE_ERR_ECCFRAME	(CACHE_ERR_EFRAME + EF_SIZE)
+#define CACHE_ERR_SP_PTR	(0x1000 - 32)	/* why -32? TBD */
+#define CACHE_ERR_IBASE_PTR	(0x1000 - 40)
+#define CACHE_ERR_SP		(CACHE_ERR_SP_PTR - 16)
+#define CACHE_ERR_AREA_SIZE	(ARCS_SPB_OFFSET - CACHE_ERR_EFRAME)
+
+#endif	/* !__ASSEMBLY__ */
+
+#define _ARCSPROM
+
+#if defined(HUB_ERR_STS_WAR)
+
+#define ERR_STS_WAR_REGISTER	IIO_IIBUSERR
+#define ERR_STS_WAR_ADDR	LOCAL_HUB_ADDR(IIO_IIBUSERR)
+#define ERR_STS_WAR_PHYSADDR	TO_PHYS((__psunsigned_t)ERR_STS_WAR_ADDR)
+				/* Used to match addr in error reg. */
+#define OLD_ERR_STS_WAR_OFFSET	((MD_MEM_BANKS * MD_BANK_SIZE) - 0x100)
+
+#endif /* HUB_ERR_STS_WAR */
+
+#endif /* _ASM_SN_SN0_ADDRS_H */
diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h
new file mode 100644
index 0000000..f734f20
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/arch.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI IP27 specific setup.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SN_SN0_ARCH_H
+#define _ASM_SN_SN0_ARCH_H
+
+
+#ifndef SN0XXL  /* 128 cpu SMP max */
+/*
+ * This is the maximum number of nodes that can be part of a kernel.
+ * Effectively, it's the maximum number of compact node ids (cnodeid_t).
+ */
+#define MAX_COMPACT_NODES       64
+
+/*
+ * MAXCPUS refers to the maximum number of CPUs in a single kernel.
+ * This is not necessarily the same as MAXNODES * CPUS_PER_NODE
+ */
+#define MAXCPUS                 128
+
+#else /* SN0XXL system */
+
+#define MAX_COMPACT_NODES       128
+#define MAXCPUS                 256
+
+#endif /* SN0XXL */
+
+/*
+ * This is the maximum number of NASIDS that can be present in a system.
+ * (Highest NASID plus one.)
+ */
+#define MAX_NASIDS		256
+
+/*
+ * MAX_REGIONS refers to the maximum number of hardware partitioned regions.
+ */
+#define	MAX_REGIONS		64
+#define MAX_NONPREMIUM_REGIONS  16
+#define MAX_PREMIUM_REGIONS     MAX_REGIONS
+
+/*
+ * MAX_PARITIONS refers to the maximum number of logically defined
+ * partitions the system can support.
+ */
+#define MAX_PARTITIONS		MAX_REGIONS
+
+#define NASID_MASK_BYTES	((MAX_NASIDS + 7) / 8)
+
+/*
+ * Slot constants for SN0
+ */
+#ifdef CONFIG_SGI_SN_N_MODE
+#define MAX_MEM_SLOTS   16                      /* max slots per node */
+#else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */
+#define MAX_MEM_SLOTS   32                      /* max slots per node */
+#endif /* CONFIG_SGI_SN_M_MODE */
+
+#define SLOT_SHIFT      	(27)
+#define SLOT_MIN_MEM_SIZE	(32*1024*1024)
+
+#define CPUS_PER_NODE		2	/* CPUs on a single hub */
+#define CPUS_PER_NODE_SHFT	1	/* Bits to shift in the node number */
+#define CPUS_PER_SUBNODE	2	/* CPUs on a single hub PI */
+
+#endif /* _ASM_SN_SN0_ARCH_H */
diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h
new file mode 100644
index 0000000..3e228f8
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hub.h
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_HUB_H
+#define _ASM_SN_SN0_HUB_H
+
+/* The secret password; used to release protection */
+#define HUB_PASSWORD		0x53474972756c6573ull
+
+#define CHIPID_HUB		0
+#define CHIPID_ROUTER		1
+
+#define HUB_REV_1_0		1
+#define HUB_REV_2_0		2
+#define HUB_REV_2_1		3
+#define HUB_REV_2_2		4
+#define HUB_REV_2_3             5
+#define HUB_REV_2_4             6
+
+#define MAX_HUB_PATH		80
+
+#include <asm/sn/sn0/addrs.h>
+#include <asm/sn/sn0/hubpi.h>
+#include <asm/sn/sn0/hubmd.h>
+#include <asm/sn/sn0/hubio.h>
+#include <asm/sn/sn0/hubni.h>
+//#include <asm/sn/sn0/hubcore.h>
+
+/* Translation of uncached attributes */
+#define	UATTR_HSPEC	0
+#define	UATTR_IO	1
+#define	UATTR_MSPEC	2
+#define	UATTR_UNCAC	3
+
+#endif /* _ASM_SN_SN0_HUB_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
new file mode 100644
index 0000000..d0c29d4
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -0,0 +1,972 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubio.h>, Revision 1.80.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef	_ASM_SGI_SN_SN0_HUBIO_H
+#define	_ASM_SGI_SN_SN0_HUBIO_H
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * In general, the longer software name should be used when available.
+ */
+
+/*
+ * Slightly friendlier names for some common registers.
+ * The hardware definitions follow.
+ */
+#define IIO_WIDGET		IIO_WID      /* Widget identification */
+#define IIO_WIDGET_STAT		IIO_WSTAT    /* Widget status register */
+#define IIO_WIDGET_CTRL		IIO_WCR	     /* Widget control register */
+#define IIO_WIDGET_TOUT		IIO_WRTO     /* Widget request timeout */
+#define IIO_WIDGET_FLUSH	IIO_WTFR     /* Widget target flush */
+#define IIO_PROTECT		IIO_ILAPR    /* IO interface protection */
+#define IIO_PROTECT_OVRRD	IIO_ILAPO    /* IO protect override */
+#define IIO_OUTWIDGET_ACCESS	IIO_IOWA     /* Outbound widget access */
+#define IIO_INWIDGET_ACCESS	IIO_IIWA     /* Inbound widget access */
+#define IIO_INDEV_ERR_MASK	IIO_IIDEM    /* Inbound device error mask */
+#define IIO_LLP_CSR		IIO_ILCSR    /* LLP control and status */
+#define IIO_LLP_LOG		IIO_ILLR     /* LLP log */
+#define IIO_XTALKCC_TOUT	IIO_IXCC     /* Xtalk credit count timeout*/
+#define IIO_XTALKTT_TOUT	IIO_IXTT     /* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR		IIO_IECLR    /* IO error clear */
+#define IIO_BTE_CRB_CNT         IIO_IBCN     /* IO BTE CRB count */
+
+#define IIO_LLP_CSR_IS_UP		0x00002000
+#define	IIO_LLP_CSR_LLP_STAT_MASK	0x00003000
+#define	IIO_LLP_CSR_LLP_STAT_SHFT	12
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY	0x53474972756c6573ull	/* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0		IIO_IBLS_0   /* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0		IIO_IBSA_0   /* Also BTE source address  0 */
+#define IIO_BTE_DEST_0		IIO_IBDA_0   /* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0		IIO_IBCT_0   /* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0 	IIO_IBNA_0   /* Also BTE notification 0 */
+#define IIO_BTE_INT_0		IIO_IBIA_0   /* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0		0	     /* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1	IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT		0
+#define BTEOFF_SRC		(IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST		(IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL		(IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY		(IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT		(IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+
+/*
+ * The following definitions use the names defined in the IO interface
+ * document for ease of reference.  When possible, software should
+ * generally use the longer but clearer names defined above.
+ */
+
+#define IIO_BASE	0x400000
+#define IIO_BASE_BTE0	0x410000
+#define IIO_BASE_BTE1	0x420000
+#define IIO_BASE_PERF	0x430000
+#define IIO_PERF_CNT	0x430008
+
+#define IO_PERF_SETS	32
+
+#define IIO_WID		0x400000	/* Widget identification */
+#define IIO_WSTAT	0x400008	/* Widget status */
+#define IIO_WCR		0x400020	/* Widget control */
+
+#define	IIO_WSTAT_ECRAZY	(1ULL << 32)	/* Hub gone crazy */
+#define	IIO_WSTAT_TXRETRY	(1ULL << 9)	/* Hub Tx Retry timeout */
+#define	IIO_WSTAT_TXRETRY_MASK	(0x7F)
+#define	IIO_WSTAT_TXRETRY_SHFT	(16)
+#define	IIO_WSTAT_TXRETRY_CNT(w)	(((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+					  IIO_WSTAT_TXRETRY_MASK)
+
+#define IIO_ILAPR	0x400100	/* Local Access Protection */
+#define IIO_ILAPO	0x400108	/* Protection override */
+#define IIO_IOWA	0x400110	/* outbound widget access */
+#define IIO_IIWA	0x400118	/* inbound widget access */
+#define IIO_IIDEM	0x400120	/* Inbound Device Error Mask */
+#define IIO_ILCSR	0x400128	/* LLP control and status */
+#define IIO_ILLR	0x400130	/* LLP Log */
+#define IIO_IIDSR	0x400138	/* Interrupt destination */
+
+#define IIO_IIBUSERR	0x1400208	/* Reads here cause a bus error. */
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT	28
+#define IIO_IIDSR_SENT_MASK	0x10000000
+#define IIO_IIDSR_ENB_SHIFT	24
+#define IIO_IIDSR_ENB_MASK	0x01000000
+#define IIO_IIDSR_NODE_SHIFT	8
+#define IIO_IIDSR_NODE_MASK	0x0000ff00
+#define IIO_IIDSR_LVL_SHIFT	0
+#define IIO_IIDSR_LVL_MASK	0x0000003f
+
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_0	0x400140	/* gfx node/widget register 0 */
+#define IIO_IGFX_1	0x400148	/* gfx node/widget register 1 */
+#define IIO_IGFX_W_NUM_BITS	4	/* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK	((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT	0
+#define IIO_IGFX_N_NUM_BITS	9	/* size of node num field */
+#define IIO_IGFX_N_NUM_MASK	((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT	4
+#define IIO_IGFX_P_NUM_BITS	1	/* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK	((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT	16
+#define IIO_IGFX_VLD_BITS	1	/* size of valid field */
+#define IIO_IGFX_VLD_MASK	((1<<IIO_IGFX_VLD_BITS)-1)
+#define IIO_IGFX_VLD_SHIFT	20
+#define IIO_IGFX_INIT(widget, node, cpu, valid)				(\
+	(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) |	 \
+	(((node)   & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) |	 \
+	(((cpu)    & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) |	 \
+	(((valid)  & IIO_IGFX_VLD_MASK)   << IIO_IGFX_VLD_SHIFT)	 )
+
+/* Scratch registers (not all bits available) */
+#define IIO_SCRATCH_REG0	0x400150
+#define	IIO_SCRATCH_REG1	0x400158
+#define IIO_SCRATCH_MASK	0x0000000f00f11fff
+
+#define IIO_SCRATCH_BIT0_0	0x0000000800000000
+#define IIO_SCRATCH_BIT0_1	0x0000000400000000
+#define IIO_SCRATCH_BIT0_2	0x0000000200000000
+#define IIO_SCRATCH_BIT0_3	0x0000000100000000
+#define IIO_SCRATCH_BIT0_4	0x0000000000800000
+#define IIO_SCRATCH_BIT0_5	0x0000000000400000
+#define IIO_SCRATCH_BIT0_6	0x0000000000200000
+#define IIO_SCRATCH_BIT0_7	0x0000000000100000
+#define IIO_SCRATCH_BIT0_8	0x0000000000010000
+#define IIO_SCRATCH_BIT0_9	0x0000000000001000
+#define IIO_SCRATCH_BIT0_R	0x0000000000000fff
+
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES	7		/* ITTEs numbered 0..6 */
+					/* Hw manuals number them 1..7! */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the hub, we've
+ * redefined big window 7 as small window 0.
+ */
+#define HUB_NUM_BIG_WINDOW	IIO_NUM_ITTES - 1
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN		HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET	0x100
+/*
+ * The IO LLP control status register and widget control register
+ */
+#ifndef __ASSEMBLY__
+
+typedef union hubii_wid_u {
+	u64	wid_reg_value;
+	struct {
+		u64 	wid_rsvd: 	32,	/* unused */
+			wid_rev_num:	 4,	/* revision number */
+			wid_part_num:	16,	/* the widget type: hub=c101 */
+			wid_mfg_num:	11,	/* Manufacturer id (IBM) */
+			wid_rsvd1:	 1;	/* Reserved */
+        } wid_fields_s;
+} hubii_wid_t;
+
+
+typedef union hubii_wcr_u {
+	u64	wcr_reg_value;
+	struct {
+		u64 	wcr_rsvd: 	41,	/* unused */
+			wcr_e_thresh:	 5,	/* elasticity threshold */
+			wcr_dir_con:	 1,	/* widget direct connect */
+			wcr_f_bad_pkt:	 1,	/* Force bad llp pkt enable */
+			wcr_xbar_crd:	 3,	/* LLP crossbar credit */
+			wcr_rsvd1:	 8,	/* Reserved */
+			wcr_tag_mode:    1,	/* Tag mode */
+			wcr_widget_id:	 4;	/* LLP crossbar credit */
+        } wcr_fields_s;
+} hubii_wcr_t;
+
+#define	iwcr_dir_con	wcr_fields_s.wcr_dir_con
+
+typedef union hubii_wstat_u {
+	u64      reg_value;
+	struct {
+		u64	rsvd1:		31,
+			crazy:		 1,	/* Crazy bit		*/
+			rsvd2:		 8,
+			llp_tx_cnt:	 8, 	/* LLP Xmit retry counter */
+			rsvd3:		 6,
+			tx_max_rtry:	 1,	/* LLP Retry Timeout Signal */
+			rsvd4:		 2,
+			xt_tail_to:	 1,	/* Xtalk Tail Timeout	*/
+			xt_crd_to:	 1,	/* Xtalk Credit Timeout	*/
+			pending:	 4;	/* Pending Requests	*/
+	} wstat_fields_s;
+} hubii_wstat_t;
+
+
+typedef union hubii_ilcsr_u {
+	u64	icsr_reg_value;
+	struct {
+		u64 	icsr_rsvd: 	22,	/* unused */
+			icsr_max_burst:	10,	/* max burst */
+                        icsr_rsvd4:	 6,	/* reserved */
+			icsr_max_retry:	10,	/* max retry */
+                        icsr_rsvd3:	 2,	/* reserved */
+                        icsr_lnk_stat:	 2,	/* link status */
+                        icsr_bm8:	 1,	/* Bit mode 8 */
+                        icsr_llp_en:	 1,	/* LLP enable bit */
+			icsr_rsvd2:	 1,     /* reserver */
+                        icsr_wrm_reset:	 1,	/* Warm reset bit */
+			icsr_rsvd1:	 2,	/* Data ready offset */
+                        icsr_null_to:	 6;	/* Null timeout   */
+
+        } icsr_fields_s;
+} hubii_ilcsr_t;
+
+
+typedef union hubii_iowa_u {
+	u64	iowa_reg_value;
+	struct {
+		u64 	iowa_rsvd: 	48,	/* unused */
+			iowa_wxoac:	 8,	/* xtalk widget access bits */
+			iowa_rsvd1:	 7,	/* xtalk widget access bits */
+			iowa_w0oac:	 1;	/* xtalk widget access bits */
+        } iowa_fields_s;
+} hubii_iowa_t;
+
+typedef union hubii_iiwa_u {
+	u64	iiwa_reg_value;
+	struct {
+		u64 	iiwa_rsvd: 	48,	/* unused */
+			iiwa_wxiac:	 8,	/* hub wid access bits */
+			iiwa_rsvd1:	 7,	/* reserved */
+			iiwa_w0iac:	 1;	/* hub wid0 access */
+        } iiwa_fields_s;
+} hubii_iiwa_t;
+
+typedef union	hubii_illr_u {
+	u64	illr_reg_value;
+	struct {
+		u64 	illr_rsvd: 	32,	/* unused */
+			illr_cb_cnt:	16,	/* checkbit error count */
+			illr_sn_cnt:	16;	/* sequence number count */
+        } illr_fields_s;
+} hubii_illr_t;
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+   performed */
+typedef union io_perf_sel {
+	u64 perf_sel_reg;
+	struct {
+		u64 	perf_rsvd  : 48,
+			perf_icct  :  8,
+			perf_ippr1 :  4,
+			perf_ippr0 :  4;
+	} perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the hub registers. Due to
+   hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+	u64	perf_cnt;
+	struct {
+		u64	perf_rsvd1 : 32,
+			perf_rsvd2 : 12,
+			perf_cnt   : 20;
+	} perf_cnt_bits;
+} io_perf_cnt_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define LNK_STAT_WORKING	0x2
+
+#define IIO_LLP_CB_MAX	0xffff
+#define IIO_LLP_SN_MAX	0xffff
+
+/* IO PRB Entries */
+#define	IIO_NUM_IPRBS	(9)
+#define IIO_IOPRB_0	0x400198	/* PRB entry 0 */
+#define IIO_IOPRB_8	0x4001a0	/* PRB entry 8 */
+#define IIO_IOPRB_9	0x4001a8	/* PRB entry 9 */
+#define IIO_IOPRB_A	0x4001b0	/* PRB entry a */
+#define IIO_IOPRB_B	0x4001b8	/* PRB entry b */
+#define IIO_IOPRB_C	0x4001c0	/* PRB entry c */
+#define IIO_IOPRB_D	0x4001c8	/* PRB entry d */
+#define IIO_IOPRB_E	0x4001d0	/* PRB entry e */
+#define IIO_IOPRB_F	0x4001d8	/* PRB entry f */
+
+
+#define IIO_IXCC	0x4001e0	/* Crosstalk credit count timeout */
+#define IIO_IXTCC	IIO_IXCC
+#define IIO_IMEM	0x4001e8	/* Miscellaneous Enable Mask */
+#define IIO_IXTT	0x4001f0	/* Crosstalk tail timeout */
+#define IIO_IECLR	0x4001f8	/* IO error clear */
+#define IIO_IBCN        0x400200        /* IO BTE CRB count */
+
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD  0x1             /* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD  (1 << 4)        /* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD  (1 << 8)        /* BTE 1 Shut down due to error */
+
+/* PIO Read address Table Entries */
+#define IIO_IPCA	0x400300	/* PRB Counter adjust */
+#define IIO_NUM_PRTES	8		/* Total number of PRB table entries */
+#define IIO_PRTE_0	0x400308	/* PIO Read address table entry 0 */
+#define IIO_PRTE(_x)	(IIO_PRTE_0 + (8 * (_x)))
+#define	IIO_WIDPRTE(x)	IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */
+#define IIO_IPDR	0x400388	/* PIO table entry deallocation */
+#define IIO_ICDR	0x400390	/* CRB Entry Deallocation */
+#define IIO_IFDR	0x400398	/* IOQ FIFO Depth */
+#define IIO_IIAP	0x4003a0	/* IIQ Arbitration Parameters */
+#define IIO_IMMR	IIO_IIAP
+#define IIO_ICMR	0x4003a8	/* CRB Management Register */
+#define IIO_ICCR	0x4003b0	/* CRB Control Register */
+#define IIO_ICTO	0x4003b8	/* CRB Time Out Register */
+#define IIO_ICTP	0x4003c0	/* CRB Time Out Prescalar */
+
+
+/*
+ * ICMR register fields
+ */
+#define IIO_ICMR_PC_VLD_SHFT	36
+#define IIO_ICMR_PC_VLD_MASK	(0x7fffUL << IIO_ICMR_PC_VLD_SHFT)
+
+#define IIO_ICMR_CRB_VLD_SHFT	20
+#define IIO_ICMR_CRB_VLD_MASK	(0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT	16
+#define IIO_ICMR_FC_CNT_MASK	(0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT	4
+#define IIO_ICMR_C_CNT_MASK	(0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_P_CNT_SHFT	0
+#define IIO_ICMR_P_CNT_MASK	(0xf << IIO_ICMR_P_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE	(1UL << 52)
+#define IIO_ICMR_CLR_RPPD	(1UL << 13)
+#define IIO_ICMR_CLR_RQPD	(1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ */
+#define	IIO_IPDR_PND	(1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define	IIO_ICDR_PND	(1 << 4)
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR
+ */
+#define	IIO_ICCR_PENDING	(0x10000)
+#define	IIO_ICCR_CMD_MASK	(0xFF)
+#define	IIO_ICCR_CMD_SHFT	(7)
+#define	IIO_ICCR_CMD_NOP	(0x0)	/* No Op */
+#define	IIO_ICCR_CMD_WAKE	(0x100) /* Reactivate CRB entry and process */
+#define	IIO_ICCR_CMD_TIMEOUT	(0x200)	/* Make CRB timeout & mark invalid */
+#define	IIO_ICCR_CMD_EJECT	(0x400)	/* Contents of entry written to memory
+					 * via a WB
+					 */
+#define	IIO_ICCR_CMD_FLUSH	(0x800)
+
+/*
+ * CRB manipulation macros
+ *	The CRB macros are slightly complicated, since there are up to
+ * 	four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS		15	/* Number of CRBs */
+#define IIO_NUM_NORMAL_CRBS     12	/* Number of regular CRB entries */
+#define IIO_NUM_PC_CRBS 	4	/* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET		8
+#define IIO_ICRB_0		0x400400
+/* XXX - This is now tuneable:
+	#define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x)	(IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x)))
+#define IIO_ICRB_B(_x)  (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET)
+#define IIO_ICRB_C(_x)	(IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET)
+#define IIO_ICRB_D(_x)  (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET)
+
+/* XXX - IBUE register coming for Hub 2 */
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to hub IIO's status.
+ * Quiescing implies  no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Fields in CRB Register A
+ */
+#ifndef __ASSEMBLY__
+typedef union icrba_u {
+	u64	reg_value;
+	struct {
+		u64 	resvd: 	6,
+			stall_bte0: 1,	/* Stall BTE 0 */
+			stall_bte1: 1,	/* Stall BTE 1 */
+			error:	1,	/* CRB has an error	*/
+			ecode:	3,	/* Error Code 		*/
+			lnetuce: 1,	/* SN0net Uncorrectable error */
+			mark:	1,	/* CRB Has been marked 	*/
+			xerr:	1,	/* Error bit set in xtalk header */
+			sidn:	4,	/* SIDN field from xtalk	*/
+			tnum: 	5,	/* TNUM field in xtalk		*/
+			addr:	38,	/* Address of request	*/
+			valid:	1,	/* Valid status		*/
+			iow:	1;	/* IO Write operation	*/
+	} icrba_fields_s;
+} icrba_t;
+
+/* This is an alternate typedef for the HUB1 CRB A in order to allow
+   runtime selection of the format based on the REV_ID field of the
+   NI_STATUS_REV_ID register. */
+typedef union h1_icrba_u {
+	u64	reg_value;
+
+	struct {
+		u64 	resvd: 	6,
+			unused:	1,	/* Unused but RW!!	*/
+			error:	1,	/* CRB has an error	*/
+			ecode:	4,	/* Error Code 		*/
+			lnetuce: 1,	/* SN0net Uncorrectable error */
+			mark:	1,	/* CRB Has been marked 	*/
+			xerr:	1,	/* Error bit set in xtalk header */
+			sidn:	4,	/* SIDN field from xtalk	*/
+			tnum: 	5,	/* TNUM field in xtalk		*/
+			addr:	38,	/* Address of request	*/
+			valid:	1,	/* Valid status		*/
+			iow:	1;	/* IO Write operation	*/
+	} h1_icrba_fields_s;
+} h1_icrba_t;
+
+/* XXX - Is this still right?  Check the spec. */
+#define ICRBN_A_CERR_SHFT	54
+#define ICRBN_A_ERR_MASK	0x3ff
+
+#endif /* !__ASSEMBLY__ */
+
+#define	IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
+
+/*
+ * values for "ecode" field
+ */
+#define	IIO_ICRB_ECODE_DERR	0	/* Directory error due to IIO access */
+#define	IIO_ICRB_ECODE_PERR	1	/* Poison error on IO access */
+#define	IIO_ICRB_ECODE_WERR	2	/* Write error by IIO access
+					 * e.g. WINV to a Read only line.
+					 */
+#define	IIO_ICRB_ECODE_AERR	3	/* Access error caused by IIO access */
+#define	IIO_ICRB_ECODE_PWERR	4	/* Error on partial write	*/
+#define	IIO_ICRB_ECODE_PRERR	5	/* Error on partial read	*/
+#define	IIO_ICRB_ECODE_TOUT	6	/* CRB timeout before deallocating */
+#define	IIO_ICRB_ECODE_XTERR	7	/* Incoming xtalk pkt had error bit */
+
+
+
+/*
+ * Fields in CRB Register B
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbb_u {
+	u64	reg_value;
+	struct {
+	    u64	rsvd1:	5,
+		btenum:	1,	/* BTE to which entry belongs to */
+		cohtrans: 1,	/* Coherent transaction	*/
+		xtsize:	2,	/* Xtalk operation size
+				 * 0: Double Word
+				 * 1: 32 Bytes.
+				 * 2: 128 Bytes,
+				 * 3: Reserved.
+				 */
+		srcnode: 9,	/* Source Node ID		*/
+		srcinit: 2,	/* Source Initiator:
+				 * See below for field values.
+				 */
+		useold:	1,	/* Use OLD command for processing */
+		imsgtype: 2,	/* Incoming message type
+				 * see below for field values
+				 */
+		imsg: 	8,	/* Incoming message 	*/
+		initator: 3,	/* Initiator of original request
+				 * See below for field values.
+				 */
+		reqtype: 5,	/* Identifies type of request
+				 * See below for field values.
+				 */
+		rsvd2:	7,
+		ackcnt:	11,	/* Invalidate ack count	*/
+		resp:	1,	/* data response  given to processor */
+		ack: 	1,	/* indicates data ack received 	*/
+		hold:	1,	/* entry is gathering inval acks */
+		wb_pend:1,	/* waiting for writeback to complete */
+		intvn: 	1,	/* Intervention */
+		stall_ib: 1,	/* Stall Ibuf (from crosstalk) */
+		stall_intr: 1;	/* Stall internal interrupts */
+	} icrbb_field_s;
+} icrbb_t;
+
+/* This is an alternate typedef for the HUB1 CRB B in order to allow
+   runtime selection of the format based on the REV_ID field of the
+   NI_STATUS_REV_ID register. */
+typedef union h1_icrbb_u {
+	u64	reg_value;
+	struct {
+		u64	rsvd1:	5,
+			btenum:	1,	/* BTE to which entry belongs to */
+			cohtrans: 1,	/* Coherent transaction	*/
+			xtsize:	2,	/* Xtalk operation size
+					 * 0: Double Word
+					 * 1: 32 Bytes.
+					 * 2: 128 Bytes,
+					 * 3: Reserved.
+					 */
+			srcnode: 9,	/* Source Node ID		*/
+			srcinit: 2,	/* Source Initiator:
+					 * See below for field values.
+					 */
+			useold:	1,	/* Use OLD command for processing */
+			imsgtype: 2,	/* Incoming message type
+					 * see below for field values
+					 */
+			imsg: 	8,	/* Incoming message 	*/
+			initator: 3,	/* Initiator of original request
+					 * See below for field values.
+					 */
+			rsvd2: 	1,
+			pcache: 1,	/* entry belongs to partial cache */
+			reqtype: 5,	/* Identifies type of request
+					 * See below for field values.
+					 */
+			stl_ib:	1,	/* stall Ibus coming from xtalk	*/
+			stl_intr: 1,	/* Stall internal interrupts */
+			stl_bte0: 1,	/* Stall BTE 0 	*/
+			stl_bte1: 1,	/* Stall BTE 1	*/
+			intrvn:	1,	/* Req was target of intervention */
+			ackcnt:	11,	/* Invalidate ack count	*/
+			resp:	1,	/* data response  given to processor */
+			ack: 	1,	/* indicates data ack received 	*/
+			hold:	1,	/* entry is gathering inval acks */
+			wb_pend:1,	/* waiting for writeback to complete */
+			sleep: 	1,	/* xtalk req sleeping till IO-sync */
+			pnd_reply: 1,	/* replies not issed due to IOQ full */
+			pnd_req: 1;	/* reqs not issued due to IOQ full */
+	} h1_icrbb_field_s;
+} h1_icrbb_t;
+
+
+#define	b_imsgtype	icrbb_field_s.imsgtype
+#define	b_btenum	icrbb_field_s.btenum
+#define	b_cohtrans	icrbb_field_s.cohtrans
+#define	b_xtsize	icrbb_field_s.xtsize
+#define	b_srcnode	icrbb_field_s.srcnode
+#define	b_srcinit	icrbb_field_s.srcinit
+#define	b_imsgtype	icrbb_field_s.imsgtype
+#define	b_imsg		icrbb_field_s.imsg
+#define	b_initiator	icrbb_field_s.initiator
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for field xtsize
+ */
+#define	IIO_ICRB_XTSIZE_DW	0	/* Xtalk operation size is 8 bytes  */
+#define	IIO_ICRB_XTSIZE_32	1	/* Xtalk operation size is 32 bytes */
+#define	IIO_ICRB_XTSIZE_128	2	/* Xtalk operation size is 128 bytes */
+
+/*
+ * values for field srcinit
+ */
+#define	IIO_ICRB_PROC0		0	/* Source of request is Proc 0 */
+#define	IIO_ICRB_PROC1		1	/* Source of request is Proc 1 */
+#define	IIO_ICRB_GB_REQ		2	/* Source is Guranteed BW request */
+#define	IIO_ICRB_IO_REQ		3	/* Source is Normal IO request	*/
+
+/*
+ * Values for field imsgtype
+ */
+#define	IIO_ICRB_IMSGT_XTALK	0	/* Incoming Meessage from Xtalk	*/
+#define	IIO_ICRB_IMSGT_BTE	1	/* Incoming message from BTE 	*/
+#define	IIO_ICRB_IMSGT_SN0NET	2	/* Incoming message from SN0 net */
+#define	IIO_ICRB_IMSGT_CRB	3	/* Incoming message from CRB ???  */
+
+/*
+ * values for field initiator.
+ */
+#define	IIO_ICRB_INIT_XTALK	0	/* Message originated in xtalk	*/
+#define	IIO_ICRB_INIT_BTE0	0x1	/* Message originated in BTE 0	*/
+#define	IIO_ICRB_INIT_SN0NET	0x2	/* Message originated in SN0net */
+#define	IIO_ICRB_INIT_CRB	0x3	/* Message originated in CRB ? 	*/
+#define	IIO_ICRB_INIT_BTE1	0x5	/* MEssage originated in BTE 1	*/
+
+/*
+ * Values for field reqtype.
+ */
+/* XXX - Need to fix this for Hub 2 */
+#define	IIO_ICRB_REQ_DWRD	0	/* Request type double word	*/
+#define	IIO_ICRB_REQ_QCLRD	1	/* Request is Qrtr Caceh line Rd */
+#define	IIO_ICRB_REQ_BLKRD	2	/* Request is block read	*/
+#define	IIO_ICRB_REQ_RSHU	6	/* Request is BTE block read	*/
+#define	IIO_ICRB_REQ_REXU	7	/* request is BTE Excl Read	*/
+#define	IIO_ICRB_REQ_RDEX	8	/* Request is Read Exclusive	*/
+#define	IIO_ICRB_REQ_WINC	9	/* Request is Write Invalidate 	*/
+#define	IIO_ICRB_REQ_BWINV	10	/* Request is BTE Winv		*/
+#define	IIO_ICRB_REQ_PIORD	11	/* Request is PIO read		*/
+#define	IIO_ICRB_REQ_PIOWR	12	/* Request is PIO Write 	*/
+#define	IIO_ICRB_REQ_PRDM	13	/* Request is Fetch&Op		*/
+#define	IIO_ICRB_REQ_PWRM	14	/* Request is Store &Op		*/
+#define	IIO_ICRB_REQ_PTPWR	15	/* Request is Peer to peer	*/
+#define	IIO_ICRB_REQ_WB		16	/* Request is Write back	*/
+#define	IIO_ICRB_REQ_DEX	17	/* Retained DEX Cache line	*/
+
+/*
+ * Fields in CRB Register C
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union icrbc_s {
+	u64	reg_value;
+	struct {
+		u64	rsvd:	6,
+			sleep:	1,
+			pricnt: 4,	/* Priority count sent with Read req */
+			pripsc: 4,	/* Priority Pre scalar 	*/
+			bteop:	1,	/* BTE Operation 	*/
+			push_be: 34,	/* Push address Byte enable
+					 * Holds push addr, if CRB is for BTE
+					 * If CRB belongs to Partial cache,
+					 * this contains byte enables bits
+					 * ([47:46] = 0)
+					 */
+			suppl:	11,	/* Supplemental field	*/
+			barrop: 1,	/* Barrier Op bit set in xtalk req */
+			doresp: 1,	/* Xtalk req needs a response 	*/
+			gbr:	1;	/* GBR bit set in xtalk packet 	*/
+	} icrbc_field_s;
+} icrbc_t;
+
+#define	c_pricnt	icrbc_field_s.pricnt
+#define	c_pripsc	icrbc_field_s.pripsc
+#define	c_bteop		icrbc_field_s.bteop
+#define	c_bteaddr	icrbc_field_s.push_be	/* push_be field has 2 names */
+#define c_benable 	icrbc_field_s.push_be	/* push_be field has 2 names */
+#define	c_suppl		icrbc_field_s.suppl
+#define	c_barrop	icrbc_field_s.barrop
+#define	c_doresp	icrbc_field_s.doresp
+#define	c_gbr	icrbc_field_s.gbr
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Fields in CRB Register D
+ */
+
+#ifndef __ASSEMBLY__
+typedef union icrbd_s {
+	u64	reg_value;
+	struct {
+	    u64	rsvd:	38,
+		toutvld: 1,	/* Timeout in progress for this CRB */
+		ctxtvld: 1,	/* Context field below is valid	*/
+		rsvd2:	1,
+		context: 15, 	/* Bit vector:
+				 * Has a bit set for each CRB entry
+				 * which needs to be deallocated
+				 * before this CRB entry is processed.
+				 * Set only for barrier operations.
+				 */
+		timeout: 8;	/* Timeout Upper 8 bits	*/
+	} icrbd_field_s;
+} icrbd_t;
+
+#define	icrbd_toutvld	icrbd_field_s.toutvld
+#define	icrbd_ctxtvld	icrbd_field_s.ctxtvld
+#define	icrbd_context	icrbd_field_s.context
+
+
+typedef union hubii_ifdr_u {
+	u64	hi_ifdr_value;
+	struct {
+		u64	ifdr_rsvd:	49,
+	                ifdr_maxrp:	 7,
+	                ifdr_rsvd1:	 1,
+			ifdr_maxrq:	 7;
+	} hi_ifdr_fields;
+} hubii_ifdr_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Hardware designed names for the BTE control registers.
+ */
+#define IIO_IBLS_0	0x410000	/* BTE length/status 0 */
+#define IIO_IBSA_0	0x410008	/* BTE source address 0 */
+#define IIO_IBDA_0	0x410010	/* BTE destination address 0 */
+#define IIO_IBCT_0	0x410018	/* BTE control/terminate 0 */
+#define IIO_IBNA_0	0x410020	/* BTE notification address 0 */
+#define IIO_IBNR_0	IIO_IBNA_0
+#define IIO_IBIA_0	0x410028	/* BTE interrupt address 0 */
+
+#define IIO_IBLS_1	0x420000	/* BTE length/status 1 */
+#define IIO_IBSA_1	0x420008	/* BTE source address 1 */
+#define IIO_IBDA_1	0x420010	/* BTE destination address 1 */
+#define IIO_IBCT_1	0x420018	/* BTE control/terminate 1 */
+#define IIO_IBNA_1	0x420020	/* BTE notification address 1 */
+#define IIO_IBNR_1	IIO_IBNA_1
+#define IIO_IBIA_1	0x420028	/* BTE interrupt address 1 */
+
+/*
+ * More miscellaneous registers
+ */
+#define IIO_IPCR	0x430000	/* Performance Control */
+#define IIO_IPPR	0x430008	/* Performance Profiling */
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_BTE1		(1 << 18)  /* clear bte error 1 ??? */
+#define IECLR_BTE0		(1 << 17)  /* clear bte error 0 ??? */
+#define IECLR_CRAZY		(1 << 16)  /* clear crazy bit in wstat reg */
+#define IECLR_PRB_F		(1 << 15)  /* clear err bit in PRB_F reg */
+#define IECLR_PRB_E		(1 << 14)  /* clear err bit in PRB_E reg */
+#define IECLR_PRB_D		(1 << 13)  /* clear err bit in PRB_D reg */
+#define IECLR_PRB_C		(1 << 12)  /* clear err bit in PRB_C reg */
+#define IECLR_PRB_B		(1 << 11)  /* clear err bit in PRB_B reg */
+#define IECLR_PRB_A		(1 << 10)  /* clear err bit in PRB_A reg */
+#define IECLR_PRB_9		(1 << 9)   /* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8		(1 << 8)   /* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0		(1 << 0)   /* clear err bit in PRB_0 reg */
+
+/*
+ * IO PIO Read Table Entry format
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union iprte_a {
+	u64	entry;
+	struct {
+	    u64	rsvd1     : 7,  /* Reserved field 		*/
+		valid     : 1,	/* Maps to a timeout entry	*/
+		rsvd2     : 1,
+		srcnode   : 9,	/* Node which did this PIO	*/
+		initiator : 2,	/* If T5A or T5B or IO 		*/
+		rsvd3     : 3,
+		addr      : 38,	/* Physical address of PIO	*/
+		rsvd4     : 3;
+	} iprte_fields;
+} iprte_a_t;
+
+#define	iprte_valid	iprte_fields.valid
+#define	iprte_timeout	iprte_fields.timeout
+#define	iprte_srcnode	iprte_fields.srcnode
+#define	iprte_init	iprte_fields.initiator
+#define	iprte_addr	iprte_fields.addr
+
+#endif /* !__ASSEMBLY__ */
+
+#define	IPRTE_ADDRSHFT	3
+
+/*
+ * Hub IIO PRB Register format.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * Note: Fields bnakctr, anakctr, xtalkctrmode, ovflow fields are
+ * "Status" fields, and should only be used in case of clean up after errors.
+ */
+
+typedef union iprb_u {
+	u64	reg_value;
+	struct {
+	    u64	rsvd1:	15,
+		error:	1,	/* Widget rcvd wr resp pkt w/ error */
+		ovflow:	5,	/* Over flow count. perf measurement */
+		fire_and_forget: 1, /* Launch Write without response */
+		mode:	2,	/* Widget operation Mode	*/
+		rsvd2:	2,
+		bnakctr: 14,
+		rsvd3: 	2,
+		anakctr: 14,
+		xtalkctr: 8;
+	} iprb_fields_s;
+} iprb_t;
+
+#define iprb_regval	reg_value
+
+#define	iprb_error	iprb_fields_s.error
+#define	iprb_ovflow	iprb_fields_s.ovflow
+#define	iprb_ff		iprb_fields_s.fire_and_forget
+#define	iprb_mode	iprb_fields_s.mode
+#define	iprb_bnakctr	iprb_fields_s.bnakctr
+#define	iprb_anakctr	iprb_fields_s.anakctr
+#define	iprb_xtalkctr	iprb_fields_s.xtalkctr
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for mode field in iprb_t.
+ * For details of the meanings of NAK and Accept, refer the PIO flow
+ * document
+ */
+#define	IPRB_MODE_NORMAL	(0)
+#define	IPRB_MODE_COLLECT_A	(1)	/* PRB in collect A mode */
+#define	IPRB_MODE_SERVICE_A	(2)	/* NAK B and Accept A */
+#define	IPRB_MODE_SERVICE_B	(3)	/* NAK A and Accept B */
+
+/*
+ * IO CRB entry C_A to E_A : Partial (cache) CRBS
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbp_a {
+	u64   ip_reg;	    /* the entire register value	*/
+	struct {
+	     u64 error:	1,  /*    63, error occurred		*/
+		ln_uce:	1,  /*    62: uncorrectable memory 	*/
+		ln_ae:	1,  /*    61: protection violation 	*/
+		ln_werr:1,  /*    60: write access error 	*/
+		ln_aerr:1,  /*    59: sn0net: Address error	*/
+		ln_perr:1,  /*    58: sn0net: poison error	*/
+		timeout:1,  /*    57: CRB timed out		*/
+		l_bdpkt:1,  /*    56: truncated pkt on sn0net	*/
+		c_bdpkt:1,  /*    55: truncated pkt on xtalk	*/
+		c_err:	1,  /*    54: incoming xtalk req, err set*/
+		rsvd1: 12,  /* 53-42: reserved			*/
+		valid:	1,  /*    41: Valid status		*/
+		sidn:	4,  /* 40-37: SIDN field of xtalk rqst	*/
+		tnum:	5,  /* 36-32: TNUM of xtalk request	*/
+		bo:	1,  /*    31: barrier op set in xtalk rqst*/
+		resprqd:1,  /*    30: xtalk rqst requires response*/
+		gbr:	1,  /*    29: gbr bit set in xtalk rqst	*/
+		size:	2,  /* 28-27: size of xtalk request	*/
+		excl:	4,  /* 26-23: exclusive bit(s)		*/
+		stall:	3,  /* 22-20: stall (xtalk, bte 0/1)	*/
+		intvn:	1,  /*    19: rqst target of intervention*/
+		resp:	1,  /*    18: Data response given to t5	*/
+		ack:	1,  /*    17: Data ack received.	*/
+		hold:	1,  /*    16: crb gathering invalidate acks*/
+		wb:	1,  /*    15: writeback pending.	*/
+		ack_cnt:11, /* 14-04: counter of invalidate acks*/
+		tscaler:4;  /* 03-00: Timeout prescaler		*/
+	} ip_fmt;
+} icrbp_a_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * A couple of defines to go with the above structure.
+ */
+#define ICRBP_A_CERR_SHFT	54
+#define ICRBP_A_ERR_MASK	0x3ff
+
+#ifndef __ASSEMBLY__
+typedef union hubii_idsr {
+	u64 iin_reg;
+	struct {
+		u64 rsvd1 : 35,
+	            isent : 1,
+	            rsvd2 : 3,
+	            ienable: 1,
+	            rsvd  : 7,
+	            node  : 9,
+	            rsvd4 : 1,
+	            level : 7;
+	} iin_fmt;
+} hubii_idsr_t;
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY		(0x1 << 20)
+#define IBLS_ERROR_SHFT		16
+#define IBLS_ERROR		(0x1 << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK	0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON		(0x1 << 8)
+#define IBCT_NOTIFY		(0x1 << 4)
+#define IBCT_ZFIL_MODE		(0x1 << 0)
+
+/*
+ * IO BTE Interrupt Address Register (IBIA) register bit field definitions
+ */
+#define IBIA_LEVEL_SHFT		16
+#define IBIA_LEVEL_MASK		(0x7f << IBIA_LEVEL_SHFT)
+#define IBIA_NODE_ID_SHFT	0
+#define IBIA_NODE_ID_MASK	(0x1ff)
+
+/*
+ * Miscellaneous hub constants
+ */
+
+/* Number of widgets supported by hub */
+#define HUB_NUM_WIDGET		9
+#define HUB_WIDGET_ID_MIN	0x8
+#define HUB_WIDGET_ID_MAX	0xf
+
+#define HUB_WIDGET_PART_NUM	0xc101
+#define MAX_HUBS_PER_XBOW	2
+
+/*
+ * Get a hub's widget id from widget control register
+ */
+#define IIO_WCR_WID_GET(nasid)	(REMOTE_HUB_L(nasid, III_WCR) & 0xf)
+#define IIO_WST_ERROR_MASK	(UINT64_CAST 1 << 32) /* Widget status error */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define       HUBII_XBOW_CREDIT       3
+#define	      HUBII_XBOW_REV2_CREDIT  4
+
+#endif /* _ASM_SGI_SN_SN0_HUBIO_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubmd.h b/arch/mips/include/asm/sn/sn0/hubmd.h
new file mode 100644
index 0000000..14c225d
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubmd.h
@@ -0,0 +1,789 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubmd.h>, revision 1.59.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef	_ASM_SN_SN0_HUBMD_H
+#define	_ASM_SN_SN0_HUBMD_H
+
+
+/*
+ * Hub Memory/Directory interface registers
+ */
+#define CACHE_SLINE_SIZE        128	/* Secondary cache line size on SN0 */
+
+#define	MAX_REGIONS		64
+
+/* Hardware page size and shift */
+
+#define MD_PAGE_SIZE		4096	 /* Page size in bytes		    */
+#define MD_PAGE_NUM_SHFT	12	 /* Address to page number shift    */
+
+/* Register offsets from LOCAL_HUB or REMOTE_HUB */
+
+#define MD_BASE			0x200000
+#define MD_BASE_PERF		0x210000
+#define MD_BASE_JUNK		0x220000
+
+#define MD_IO_PROTECT		0x200000 /* MD and core register protection */
+#define MD_IO_PROT_OVRRD	0x200008 /* Clear my bit in MD_IO_PROTECT   */
+#define MD_HSPEC_PROTECT	0x200010 /* BDDIR, LBOOT, RBOOT protection  */
+#define MD_MEMORY_CONFIG	0x200018 /* Memory/Directory DIMM control   */
+#define	MD_REFRESH_CONTROL	0x200020 /* Memory/Directory refresh ctrl   */
+#define	MD_FANDOP_CAC_STAT	0x200028 /* Fetch-and-op cache status 	    */
+#define	MD_MIG_DIFF_THRESH	0x200030 /* Page migr. count diff thresh.   */
+#define	MD_MIG_VALUE_THRESH	0x200038 /* Page migr. count abs. thresh.   */
+#define	MD_MIG_CANDIDATE	0x200040 /* Latest page migration candidate */
+#define	MD_MIG_CANDIDATE_CLR	0x200048 /* Clear page migration candidate  */
+#define MD_DIR_ERROR		0x200050 /* Directory DIMM error 	    */
+#define MD_DIR_ERROR_CLR	0x200058 /* Directory DIMM error clear 	    */
+#define MD_PROTOCOL_ERROR	0x200060 /* Directory protocol error 	    */
+#define MD_PROTOCOL_ERROR_CLR	0x200068 /* Directory protocol error clear  */
+#define MD_MEM_ERROR		0x200070 /* Memory DIMM error 		    */
+#define MD_MEM_ERROR_CLR	0x200078 /* Memory DIMM error clear 	    */
+#define MD_MISC_ERROR		0x200080 /* Miscellaneous MD error 	    */
+#define MD_MISC_ERROR_CLR	0x200088 /* Miscellaneous MD error clear    */
+#define MD_MEM_DIMM_INIT	0x200090 /* Memory DIMM mode initization.   */
+#define MD_DIR_DIMM_INIT	0x200098 /* Directory DIMM mode init. 	    */
+#define MD_MOQ_SIZE		0x2000a0 /* MD outgoing queue size 	    */
+#define MD_MLAN_CTL		0x2000a8 /* NIC (Microlan) control register */
+
+#define MD_PERF_SEL		0x210000 /* Select perf monitor events 	    */
+#define MD_PERF_CNT0		0x210010 /* Performance counter 0 	    */
+#define MD_PERF_CNT1		0x210018 /* Performance counter 1 	    */
+#define MD_PERF_CNT2		0x210020 /* Performance counter 2 	    */
+#define MD_PERF_CNT3		0x210028 /* Performance counter 3 	    */
+#define MD_PERF_CNT4		0x210030 /* Performance counter 4 	    */
+#define MD_PERF_CNT5		0x210038 /* Performance counter 5 	    */
+
+#define MD_UREG0_0		0x220000 /* uController/UART 0 register     */
+#define MD_UREG0_1		0x220008 /* uController/UART 0 register     */
+#define MD_UREG0_2		0x220010 /* uController/UART 0 register     */
+#define MD_UREG0_3		0x220018 /* uController/UART 0 register     */
+#define MD_UREG0_4		0x220020 /* uController/UART 0 register     */
+#define MD_UREG0_5		0x220028 /* uController/UART 0 register     */
+#define MD_UREG0_6		0x220030 /* uController/UART 0 register     */
+#define MD_UREG0_7		0x220038 /* uController/UART 0 register     */
+
+#define MD_SLOTID_USTAT		0x220048 /* Hub slot ID & UART/uCtlr status */
+#define MD_LED0			0x220050 /* Eight-bit LED for CPU A 	    */
+#define MD_LED1			0x220058 /* Eight-bit LED for CPU B 	    */
+
+#define MD_UREG1_0		0x220080 /* uController/UART 1 register     */
+#define MD_UREG1_1		0x220088 /* uController/UART 1 register     */
+#define MD_UREG1_2		0x220090 /* uController/UART 1 register     */
+#define MD_UREG1_3		0x220098 /* uController/UART 1 register     */
+#define MD_UREG1_4		0x2200a0 /* uController/UART 1 register     */
+#define MD_UREG1_5		0x2200a8 /* uController/UART 1 register     */
+#define MD_UREG1_6		0x2200b0 /* uController/UART 1 register     */
+#define MD_UREG1_7		0x2200b8 /* uController/UART 1 register     */
+#define MD_UREG1_8		0x2200c0 /* uController/UART 1 register     */
+#define MD_UREG1_9		0x2200c8 /* uController/UART 1 register     */
+#define MD_UREG1_10		0x2200d0 /* uController/UART 1 register     */
+#define MD_UREG1_11		0x2200d8 /* uController/UART 1 register     */
+#define MD_UREG1_12		0x2200e0 /* uController/UART 1 register     */
+#define MD_UREG1_13		0x2200e8 /* uController/UART 1 register     */
+#define MD_UREG1_14		0x2200f0 /* uController/UART 1 register     */
+#define MD_UREG1_15		0x2200f8 /* uController/UART 1 register     */
+
+#ifdef CONFIG_SGI_SN_N_MODE
+#define MD_MEM_BANKS		4	 /* 4 banks of memory max in N mode */
+#else
+#define MD_MEM_BANKS		8	 /* 8 banks of memory max in M mode */
+#endif
+
+/*
+ * MD_MEMORY_CONFIG fields
+ *
+ *   MD_SIZE_xxx are useful for representing the size of a SIMM or bank
+ *   (SIMM pair).  They correspond to the values needed for the bit
+ *   triplets (MMC_BANK_MASK) in the MD_MEMORY_CONFIG register for bank size.
+ *   Bits not used by the MD are used by software.
+ */
+
+#define MD_SIZE_EMPTY		0	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_8MB		1
+#define MD_SIZE_16MB		2
+#define MD_SIZE_32MB		3	/* Broken in Hub 1		    */
+#define MD_SIZE_64MB		4	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_128MB		5	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_256MB		6
+#define MD_SIZE_512MB		7	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_1GB		8
+#define MD_SIZE_2GB		9
+#define MD_SIZE_4GB		10
+
+#define MD_SIZE_BYTES(size)	((size) == 0 ? 0 : 0x400000L << (size))
+#define MD_SIZE_MBYTES(size)	((size) == 0 ? 0 :   4	     << (size))
+
+#define MMC_FPROM_CYC_SHFT	49	/* Have to use UINT64_CAST, instead */
+#define MMC_FPROM_CYC_MASK	(UINT64_CAST 31 << 49)	/* of 'L' suffix,   */
+#define MMC_FPROM_WR_SHFT	44			/* for assembler    */
+#define MMC_FPROM_WR_MASK	(UINT64_CAST 31 << 44)
+#define MMC_UCTLR_CYC_SHFT	39
+#define MMC_UCTLR_CYC_MASK	(UINT64_CAST 31 << 39)
+#define MMC_UCTLR_WR_SHFT	34
+#define MMC_UCTLR_WR_MASK	(UINT64_CAST 31 << 34)
+#define MMC_DIMM0_SEL_SHFT	32
+#define MMC_DIMM0_SEL_MASK	(UINT64_CAST 3 << 32)
+#define MMC_IO_PROT_EN_SHFT	31
+#define MMC_IO_PROT_EN_MASK	(UINT64_CAST 1 << 31)
+#define MMC_IO_PROT		(UINT64_CAST 1 << 31)
+#define MMC_ARB_MLSS_SHFT	30
+#define MMC_ARB_MLSS_MASK	(UINT64_CAST 1 << 30)
+#define MMC_ARB_MLSS		(UINT64_CAST 1 << 30)
+#define MMC_IGNORE_ECC_SHFT	29
+#define MMC_IGNORE_ECC_MASK	(UINT64_CAST 1 << 29)
+#define MMC_IGNORE_ECC		(UINT64_CAST 1 << 29)
+#define MMC_DIR_PREMIUM_SHFT	28
+#define MMC_DIR_PREMIUM_MASK	(UINT64_CAST 1 << 28)
+#define MMC_DIR_PREMIUM		(UINT64_CAST 1 << 28)
+#define MMC_REPLY_GUAR_SHFT	24
+#define MMC_REPLY_GUAR_MASK	(UINT64_CAST 15 << 24)
+#define MMC_BANK_SHFT(_b)	((_b) * 3)
+#define MMC_BANK_MASK(_b)	(UINT64_CAST 7 << MMC_BANK_SHFT(_b))
+#define MMC_BANK_ALL_MASK	0xffffff
+#define MMC_RESET_DEFAULTS	(UINT64_CAST 0x0f << MMC_FPROM_CYC_SHFT | \
+				 UINT64_CAST 0x07 << MMC_FPROM_WR_SHFT | \
+				 UINT64_CAST 0x1f << MMC_UCTLR_CYC_SHFT | \
+				 UINT64_CAST 0x0f << MMC_UCTLR_WR_SHFT | \
+				 MMC_IGNORE_ECC | MMC_DIR_PREMIUM | \
+				 UINT64_CAST 0x0f << MMC_REPLY_GUAR_SHFT | \
+				 MMC_BANK_ALL_MASK)
+
+/* MD_REFRESH_CONTROL fields */
+
+#define MRC_ENABLE_SHFT		63
+#define MRC_ENABLE_MASK		(UINT64_CAST 1 << 63)
+#define MRC_ENABLE		(UINT64_CAST 1 << 63)
+#define MRC_COUNTER_SHFT	12
+#define MRC_COUNTER_MASK	(UINT64_CAST 0xfff << 12)
+#define MRC_CNT_THRESH_MASK	0xfff
+#define MRC_RESET_DEFAULTS	(UINT64_CAST 0x400)
+
+/* MD_MEM_DIMM_INIT and MD_DIR_DIMM_INIT fields */
+
+#define MDI_SELECT_SHFT		32
+#define MDI_SELECT_MASK		(UINT64_CAST 0x0f << 32)
+#define MDI_DIMM_MODE_MASK	(UINT64_CAST 0xfff)
+
+/* MD_MOQ_SIZE fields */
+
+#define MMS_RP_SIZE_SHFT	8
+#define MMS_RP_SIZE_MASK	(UINT64_CAST 0x3f << 8)
+#define MMS_RQ_SIZE_SHFT	0
+#define MMS_RQ_SIZE_MASK	(UINT64_CAST 0x1f)
+#define MMS_RESET_DEFAULTS	(0x32 << 8 | 0x12)
+
+/* MD_FANDOP_CAC_STAT fields */
+
+#define MFC_VALID_SHFT		63
+#define MFC_VALID_MASK		(UINT64_CAST 1 << 63)
+#define MFC_VALID		(UINT64_CAST 1 << 63)
+#define MFC_ADDR_SHFT		6
+#define MFC_ADDR_MASK		(UINT64_CAST 0x3ffffff)
+
+/* MD_MLAN_CTL fields */
+
+#define MLAN_PHI1_SHFT		27
+#define MLAN_PHI1_MASK		(UINT64_CAST 0x7f << 27)
+#define MLAN_PHI0_SHFT		20
+#define MLAN_PHI0_MASK		(UINT64_CAST 0x7f << 27)
+#define MLAN_PULSE_SHFT		10
+#define MLAN_PULSE_MASK		(UINT64_CAST 0x3ff << 10)
+#define MLAN_SAMPLE_SHFT	2
+#define MLAN_SAMPLE_MASK	(UINT64_CAST 0xff << 2)
+#define MLAN_DONE_SHFT		1
+#define MLAN_DONE_MASK		2
+#define MLAN_DONE		(UINT64_CAST 0x02)
+#define MLAN_RD_DATA		(UINT64_CAST 0x01)
+#define MLAN_RESET_DEFAULTS	(UINT64_CAST 0x31 << MLAN_PHI1_SHFT | \
+				 UINT64_CAST 0x31 << MLAN_PHI0_SHFT)
+
+/* MD_SLOTID_USTAT bit definitions */
+
+#define MSU_CORECLK_TST_SHFT	7	/* You don't wanna know             */
+#define MSU_CORECLK_TST_MASK	(UINT64_CAST 1 << 7)
+#define MSU_CORECLK_TST		(UINT64_CAST 1 << 7)
+#define MSU_CORECLK_SHFT	6	/* You don't wanna know             */
+#define MSU_CORECLK_MASK	(UINT64_CAST 1 << 6)
+#define MSU_CORECLK		(UINT64_CAST 1 << 6)
+#define MSU_NETSYNC_SHFT	5	/* You don't wanna know             */
+#define MSU_NETSYNC_MASK	(UINT64_CAST 1 << 5)
+#define MSU_NETSYNC		(UINT64_CAST 1 << 5)
+#define MSU_FPROMRDY_SHFT	4	/* Flash PROM ready bit 	    */
+#define MSU_FPROMRDY_MASK	(UINT64_CAST 1 << 4)
+#define MSU_FPROMRDY		(UINT64_CAST 1 << 4)
+#define MSU_I2CINTR_SHFT		3	/* I2C interrupt bit   */
+#define MSU_I2CINTR_MASK		(UINT64_CAST 1 << 3)
+#define MSU_I2CINTR		(UINT64_CAST 1 << 3)
+#define MSU_SLOTID_MASK		0xff
+#define MSU_SN0_SLOTID_SHFT	0	/* Slot ID			    */
+#define MSU_SN0_SLOTID_MASK	(UINT64_CAST 7)
+#define MSU_SN00_SLOTID_SHFT	7
+#define MSU_SN00_SLOTID_MASK	(UINT64_CAST 0x80)
+
+#define	MSU_PIMM_PSC_SHFT	4
+#define	MSU_PIMM_PSC_MASK	(0xf << MSU_PIMM_PSC_SHFT)
+
+/* MD_MIG_DIFF_THRESH bit definitions */
+
+#define MD_MIG_DIFF_THRES_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_DIFF_THRES_VALID_SHFT 63
+#define MD_MIG_DIFF_THRES_VALUE_MASK (UINT64_CAST 0xfffff)
+
+/* MD_MIG_VALUE_THRESH bit definitions */
+
+#define MD_MIG_VALUE_THRES_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_VALUE_THRES_VALID_SHFT 63
+#define MD_MIG_VALUE_THRES_VALUE_MASK (UINT64_CAST 0xfffff)
+
+/* MD_MIG_CANDIDATE bit definitions */
+
+#define MD_MIG_CANDIDATE_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_CANDIDATE_VALID_SHFT 63
+#define MD_MIG_CANDIDATE_TYPE_MASK (UINT64_CAST 0x1 << 30)
+#define MD_MIG_CANDIDATE_TYPE_SHFT 30
+#define MD_MIG_CANDIDATE_OVERRUN_MASK (UINT64_CAST 0x1 << 29)
+#define MD_MIG_CANDIDATE_OVERRUN_SHFT 29
+#define MD_MIG_CANDIDATE_INITIATOR_MASK (UINT64_CAST 0x7ff << 18)
+#define MD_MIG_CANDIDATE_INITIATOR_SHFT 18
+#define MD_MIG_CANDIDATE_NODEID_MASK (UINT64_CAST 0x1ff << 20)
+#define MD_MIG_CANDIDATE_NODEID_SHFT 20
+#define MD_MIG_CANDIDATE_ADDR_MASK (UINT64_CAST 0x3ffff)
+#define MD_MIG_CANDIDATE_ADDR_SHFT 14  /* The address starts at bit 14 */
+
+/* Other MD definitions */
+
+#define MD_BANK_SHFT		29			/* log2(512 MB)     */
+#define MD_BANK_MASK		(UINT64_CAST 7 << 29)
+#define MD_BANK_SIZE		(UINT64_CAST 1 << MD_BANK_SHFT)	  /* 512 MB */
+#define MD_BANK_OFFSET(_b)	(UINT64_CAST (_b) << MD_BANK_SHFT)
+
+/*
+ * The following definitions cover the bit field definitions for the
+ * various MD registers.  For multi-bit registers, we define both
+ * a shift amount and a mask value.  By convention, if you want to
+ * isolate a field, you should mask the field and then shift it down,
+ * since this makes the masks useful without a shift.
+ */
+
+/* Directory entry states for both premium and standard SIMMs. */
+
+#define MD_DIR_SHARED		(UINT64_CAST 0x0)	/* 000 */
+#define MD_DIR_POISONED		(UINT64_CAST 0x1)	/* 001 */
+#define MD_DIR_EXCLUSIVE	(UINT64_CAST 0x2)	/* 010 */
+#define MD_DIR_BUSY_SHARED	(UINT64_CAST 0x3)	/* 011 */
+#define MD_DIR_BUSY_EXCL	(UINT64_CAST 0x4)	/* 100 */
+#define MD_DIR_WAIT		(UINT64_CAST 0x5)	/* 101 */
+#define MD_DIR_UNOWNED		(UINT64_CAST 0x7)	/* 111 */
+
+/*
+ * The MD_DIR_FORCE_ECC bit can be added directory entry write data
+ * to forcing the ECC to be written as-is instead of recalculated.
+ */
+
+#define MD_DIR_FORCE_ECC	(UINT64_CAST 1 << 63)
+
+/*
+ * Premium SIMM directory entry shifts and masks.  Each is valid only in the
+ * context(s) indicated, where A, B, and C indicate the directory entry format
+ * as shown, and low and/or high indicates which double-word of the entry.
+ *
+ * Format A:  STATE = shared, FINE = 1
+ * Format B:  STATE = shared, FINE = 0
+ * Format C:  STATE != shared (FINE must be 0)
+ */
+
+#define MD_PDIR_MASK		0xffffffffffff		/* Whole entry 	    */
+#define MD_PDIR_ECC_SHFT	0			/* ABC low or high  */
+#define MD_PDIR_ECC_MASK	0x7f
+#define MD_PDIR_PRIO_SHFT	8			/* ABC low 	    */
+#define MD_PDIR_PRIO_MASK	(0xf << 8)
+#define MD_PDIR_AX_SHFT		7			/* ABC low 	    */
+#define MD_PDIR_AX_MASK		(1 << 7)
+#define MD_PDIR_AX		(1 << 7)
+#define MD_PDIR_FINE_SHFT	12			/* ABC low 	    */
+#define MD_PDIR_FINE_MASK	(1 << 12)
+#define MD_PDIR_FINE		(1 << 12)
+#define MD_PDIR_OCT_SHFT	13			/* A low 	    */
+#define MD_PDIR_OCT_MASK	(7 << 13)
+#define MD_PDIR_STATE_SHFT	13			/* BC low 	    */
+#define MD_PDIR_STATE_MASK	(7 << 13)
+#define MD_PDIR_ONECNT_SHFT	16			/* BC low 	    */
+#define MD_PDIR_ONECNT_MASK	(0x3f << 16)
+#define MD_PDIR_PTR_SHFT	22			/* C low 	    */
+#define MD_PDIR_PTR_MASK	(UINT64_CAST 0x7ff << 22)
+#define MD_PDIR_VECMSB_SHFT	22			/* AB low 	    */
+#define MD_PDIR_VECMSB_BITMASK	0x3ffffff
+#define MD_PDIR_VECMSB_BITSHFT	27
+#define MD_PDIR_VECMSB_MASK	(UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22)
+#define MD_PDIR_CWOFF_SHFT	7			/* C high 	    */
+#define MD_PDIR_CWOFF_MASK	(7 << 7)
+#define MD_PDIR_VECLSB_SHFT	10			/* AB high 	    */
+#define MD_PDIR_VECLSB_BITMASK	(UINT64_CAST 0x3fffffffff)
+#define MD_PDIR_VECLSB_BITSHFT	0
+#define MD_PDIR_VECLSB_MASK	(MD_PDIR_VECLSB_BITMASK << 10)
+
+/*
+ * Directory initialization values
+ */
+
+#define MD_PDIR_INIT_LO		(MD_DIR_UNOWNED << MD_PDIR_STATE_SHFT | \
+				 MD_PDIR_AX)
+#define MD_PDIR_INIT_HI		0
+#define MD_PDIR_INIT_PROT	(MD_PROT_RW << MD_PPROT_IO_SHFT | \
+				 MD_PROT_RW << MD_PPROT_SHFT)
+
+/*
+ * Standard SIMM directory entry shifts and masks.  Each is valid only in the
+ * context(s) indicated, where A and C indicate the directory entry format
+ * as shown, and low and/or high indicates which double-word of the entry.
+ *
+ * Format A:  STATE == shared
+ * Format C:  STATE != shared
+ */
+
+#define MD_SDIR_MASK		0xffff			/* Whole entry 	    */
+#define MD_SDIR_ECC_SHFT	0			/* AC low or high   */
+#define MD_SDIR_ECC_MASK	0x1f
+#define MD_SDIR_PRIO_SHFT	6			/* AC low 	    */
+#define MD_SDIR_PRIO_MASK	(1 << 6)
+#define MD_SDIR_AX_SHFT		5			/* AC low 	    */
+#define MD_SDIR_AX_MASK		(1 << 5)
+#define MD_SDIR_AX		(1 << 5)
+#define MD_SDIR_STATE_SHFT	7			/* AC low 	    */
+#define MD_SDIR_STATE_MASK	(7 << 7)
+#define MD_SDIR_PTR_SHFT	10			/* C low 	    */
+#define MD_SDIR_PTR_MASK	(0x3f << 10)
+#define MD_SDIR_CWOFF_SHFT	5			/* C high 	    */
+#define MD_SDIR_CWOFF_MASK	(7 << 5)
+#define MD_SDIR_VECMSB_SHFT	11			/* A low 	    */
+#define MD_SDIR_VECMSB_BITMASK	0x1f
+#define MD_SDIR_VECMSB_BITSHFT	7
+#define MD_SDIR_VECMSB_MASK	(MD_SDIR_VECMSB_BITMASK << 11)
+#define MD_SDIR_VECLSB_SHFT	5			/* A high 	    */
+#define MD_SDIR_VECLSB_BITMASK	0x7ff
+#define MD_SDIR_VECLSB_BITSHFT	0
+#define MD_SDIR_VECLSB_MASK	(MD_SDIR_VECLSB_BITMASK << 5)
+
+/*
+ * Directory initialization values
+ */
+
+#define MD_SDIR_INIT_LO		(MD_DIR_UNOWNED << MD_SDIR_STATE_SHFT | \
+				 MD_SDIR_AX)
+#define MD_SDIR_INIT_HI		0
+#define MD_SDIR_INIT_PROT	(MD_PROT_RW << MD_SPROT_SHFT)
+
+/* Protection and migration field values */
+
+#define MD_PROT_RW		(UINT64_CAST 0x6)
+#define MD_PROT_RO		(UINT64_CAST 0x3)
+#define MD_PROT_NO		(UINT64_CAST 0x0)
+#define MD_PROT_BAD		(UINT64_CAST 0x5)
+
+/* Premium SIMM protection entry shifts and masks. */
+
+#define MD_PPROT_SHFT		0			/* Prot. field 	    */
+#define MD_PPROT_MASK		7
+#define MD_PPROT_MIGMD_SHFT	3			/* Migration mode   */
+#define MD_PPROT_MIGMD_MASK	(3 << 3)
+#define MD_PPROT_REFCNT_SHFT	5			/* Reference count  */
+#define MD_PPROT_REFCNT_WIDTH	0x7ffff
+#define MD_PPROT_REFCNT_MASK	(MD_PPROT_REFCNT_WIDTH << 5)
+
+#define MD_PPROT_IO_SHFT	45			/* I/O Prot field   */
+#define MD_PPROT_IO_MASK	(UINT64_CAST 7 << 45)
+
+/* Standard SIMM protection entry shifts and masks. */
+
+#define MD_SPROT_SHFT		0			/* Prot. field 	    */
+#define MD_SPROT_MASK		7
+#define MD_SPROT_MIGMD_SHFT	3			/* Migration mode   */
+#define MD_SPROT_MIGMD_MASK	(3 << 3)
+#define MD_SPROT_REFCNT_SHFT	5			/* Reference count  */
+#define MD_SPROT_REFCNT_WIDTH	0x7ff
+#define MD_SPROT_REFCNT_MASK	(MD_SPROT_REFCNT_WIDTH << 5)
+
+/* Migration modes used in protection entries */
+
+#define MD_PROT_MIGMD_IREL	(UINT64_CAST 0x3 << 3)
+#define MD_PROT_MIGMD_IABS	(UINT64_CAST 0x2 << 3)
+#define MD_PROT_MIGMD_PREL	(UINT64_CAST 0x1 << 3)
+#define MD_PROT_MIGMD_OFF	(UINT64_CAST 0x0 << 3)
+
+
+/*
+ * Operations on page migration threshold register
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * LED register macros
+ */
+
+#define CPU_LED_ADDR(_nasid, _slice)					   \
+	(private.p_sn00 ?						   \
+	 REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 +	((_slice) << 5)) :	   \
+	 REMOTE_HUB_ADDR((_nasid), MD_LED0    + ((_slice) << 3)))
+
+#define SET_CPU_LEDS(_nasid, _slice,  _val)				   \
+	(HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val)))
+
+#define SET_MY_LEDS(_v) 						   \
+	SET_CPU_LEDS(get_nasid(), get_slice(), (_v))
+
+/*
+ * Operations on Memory/Directory DIMM control register
+ */
+
+#define DIRTYPE_PREMIUM 1
+#define DIRTYPE_STANDARD 0
+#define MD_MEMORY_CONFIG_DIR_TYPE_GET(region) (\
+	(REMOTE_HUB_L(region, MD_MEMORY_CONFIG) & MMC_DIR_PREMIUM_MASK) >> \
+	MMC_DIR_PREMIUM_SHFT)
+
+
+/*
+ * Operations on page migration count difference and absolute threshold
+ * registers
+ */
+
+#define MD_MIG_DIFF_THRESH_GET(region) ( \
+	REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \
+	MD_MIG_DIFF_THRES_VALUE_MASK)
+
+#define MD_MIG_DIFF_THRESH_SET(region, value) (				\
+	REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH,			\
+		MD_MIG_DIFF_THRES_VALID_MASK | (value)))
+
+#define MD_MIG_DIFF_THRESH_DISABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH,			\
+		REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH)		\
+			     & ~MD_MIG_DIFF_THRES_VALID_MASK))
+
+#define MD_MIG_DIFF_THRESH_ENABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH,			\
+		REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH)		\
+			     | MD_MIG_DIFF_THRES_VALID_MASK))
+
+#define MD_MIG_DIFF_THRESH_IS_ENABLED(region) (				\
+	REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) &			\
+	       MD_MIG_DIFF_THRES_VALID_MASK)
+
+#define MD_MIG_VALUE_THRESH_GET(region) (				\
+	REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) &  \
+	MD_MIG_VALUE_THRES_VALUE_MASK)
+
+#define MD_MIG_VALUE_THRESH_SET(region, value) (			\
+	REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH,			\
+		MD_MIG_VALUE_THRES_VALID_MASK | (value)))
+
+#define MD_MIG_VALUE_THRESH_DISABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH,			\
+		REMOTE_HUB_L(region, MD_MIG_VALUE_THRESH)		\
+			     & ~MD_MIG_VALUE_THRES_VALID_MASK))
+
+#define MD_MIG_VALUE_THRESH_ENABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH,			\
+		REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH)		\
+			     | MD_MIG_VALUE_THRES_VALID_MASK))
+
+#define MD_MIG_VALUE_THRESH_IS_ENABLED(region) (			\
+	REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) &			 \
+	       MD_MIG_VALUE_THRES_VALID_MASK)
+
+/*
+ * Operations on page migration candidate register
+ */
+
+#define MD_MIG_CANDIDATE_GET(my_region_id) ( \
+	REMOTE_HUB_L((my_region_id), MD_MIG_CANDIDATE_CLR))
+
+#define MD_MIG_CANDIDATE_HWPFN(value) ((value) & MD_MIG_CANDIDATE_ADDR_MASK)
+
+#define MD_MIG_CANDIDATE_NODEID(value) ( \
+	((value) & MD_MIG_CANDIDATE_NODEID_MASK) >> MD_MIG_CANDIDATE_NODEID_SHFT)
+
+#define MD_MIG_CANDIDATE_TYPE(value) ( \
+	((value) & MD_MIG_CANDIDATE_TYPE_MASK) >> MD_MIG_CANDIDATE_TYPE_SHFT)
+
+#define MD_MIG_CANDIDATE_VALID(value) ( \
+	((value) & MD_MIG_CANDIDATE_VALID_MASK) >> MD_MIG_CANDIDATE_VALID_SHFT)
+
+/*
+ * Macros to retrieve fields in the protection entry
+ */
+
+/* for Premium SIMM */
+#define MD_PPROT_REFCNT_GET(value) ( \
+	((value) & MD_PPROT_REFCNT_MASK) >> MD_PPROT_REFCNT_SHFT)
+
+#define MD_PPROT_MIGMD_GET(value) ( \
+	((value) & MD_PPROT_MIGMD_MASK) >> MD_PPROT_MIGMD_SHFT)
+
+/* for Standard SIMM */
+#define MD_SPROT_REFCNT_GET(value) ( \
+	((value) & MD_SPROT_REFCNT_MASK) >> MD_SPROT_REFCNT_SHFT)
+
+#define MD_SPROT_MIGMD_GET(value) ( \
+	((value) & MD_SPROT_MIGMD_MASK) >> MD_SPROT_MIGMD_SHFT)
+
+/*
+ * Format of dir_error, mem_error, protocol_error and misc_error registers
+ */
+
+struct dir_error_reg {
+	u64	uce_vld:   1,	/*    63: valid directory uce 	*/
+		ae_vld:	   1,	/*    62: valid dir prot ecc error */
+		ce_vld:	   1,	/*    61: valid correctable ECC err*/
+		rsvd1:	  19,	/* 60-42: reserved		*/
+		bad_prot:  3,	/* 41-39: encoding, bad access rights*/
+		bad_syn:   7,	/* 38-32: bad dir syndrome	*/
+		rsvd2:	   2,	/* 31-30: reserved		*/
+		hspec_addr:27,	/* 29-03: bddir space bad entry */
+		uce_ovr:   1,	/*     2: multiple dir uce's	*/
+		ae_ovr:	   1,	/*     1: multiple prot ecc errs*/
+		ce_ovr:	   1;	/*     0: multiple correctable errs */
+};
+
+typedef union md_dir_error {
+	u64	derr_reg;	/* the entire register 		*/
+	struct dir_error_reg derr_fmt;	/* the register format		*/
+} md_dir_error_t;
+
+
+struct mem_error_reg {
+	u64	uce_vld:   1,	/*    63: valid memory uce 	*/
+		ce_vld:	   1,	/*    62: valid correctable ECC err*/
+		rsvd1:	  22,	/* 61-40: reserved		*/
+		bad_syn:   8,	/* 39-32: bad mem ecc syndrome	*/
+		address:  29,	/* 31-03: bad entry pointer	*/
+		rsvd2:	   1,	/*     2: reserved		*/
+		uce_ovr:   1,	/*     1: multiple mem uce's	*/
+		ce_ovr:	   1;	/*     0: multiple correctable errs */
+};
+
+
+typedef union md_mem_error {
+	u64	merr_reg;	/* the entire register 		*/
+	struct mem_error_reg  merr_fmt; /* format of the mem_error reg  */
+} md_mem_error_t;
+
+
+struct proto_error_reg {
+	u64	valid:	   1,	/*    63: valid protocol error	*/
+		rsvd1:	   2,	/* 62-61: reserved		*/
+		initiator:11,	/* 60-50: id of request initiator*/
+		backoff:   2,	/* 49-48: backoff control	*/
+		msg_type:  8,	/* 47-40: type of request	*/
+		access:	   2,	/* 39-38: access rights of initiator*/
+		priority:  1,	/*    37: priority level of requestor*/
+		dir_state: 4,	/* 36-33: state of directory	*/
+		pointer_me:1,	/*    32: initiator same as dir ptr */
+		address:  29,	/* 31-03: request address	*/
+		rsvd2:	   2,	/* 02-01: reserved		*/
+		overrun:   1;	/*     0: multiple protocol errs */
+};
+
+typedef union md_proto_error {
+	u64	perr_reg;	/* the entire register 		*/
+	struct proto_error_reg	perr_fmt; /* format of the register	*/
+} md_proto_error_t;
+
+
+struct md_sdir_high_fmt {
+	unsigned short sd_hi_bvec : 11,
+		       sd_hi_ecc  : 5;
+};
+
+
+typedef union md_sdir_high {
+	/* The 16 bits of standard directory, upper word */
+	unsigned short sd_hi_val;
+	struct	md_sdir_high_fmt sd_hi_fmt;
+}md_sdir_high_t;
+
+
+struct md_sdir_low_shared_fmt {
+	/* The meaning of lower directory, shared */
+	unsigned short	sds_lo_bvec  : 5,
+			sds_lo_unused: 1,
+			sds_lo_state : 3,
+			sds_lo_prio  : 1,
+			sds_lo_ax    : 1,
+			sds_lo_ecc   : 5;
+};
+
+struct md_sdir_low_exclusive_fmt {
+	/* The meaning of lower directory, exclusive */
+	unsigned short	sde_lo_ptr   : 6,
+			sde_lo_state : 3,
+			sde_lo_prio  : 1,
+			sde_lo_ax    : 1,
+			sde_lo_ecc   : 5;
+};
+
+
+typedef union md_sdir_low {
+	/* The 16 bits of standard directory, lower word */
+	unsigned short	sd_lo_val;
+	struct	md_sdir_low_exclusive_fmt sde_lo_fmt;
+	struct	md_sdir_low_shared_fmt sds_lo_fmt;
+}md_sdir_low_t;
+
+
+
+struct md_pdir_high_fmt {
+	u64	pd_hi_unused   : 16,
+		pd_hi_bvec     : 38,
+		pd_hi_unused1  : 3,
+		pd_hi_ecc      : 7;
+};
+
+
+typedef union md_pdir_high {
+	/* The 48 bits of standard directory, upper word */
+	u64	pd_hi_val;
+	struct md_pdir_high_fmt pd_hi_fmt;
+}md_pdir_high_t;
+
+
+struct md_pdir_low_shared_fmt {
+	/* The meaning of lower directory, shared */
+	u64	pds_lo_unused	: 16,
+		pds_lo_bvec	: 26,
+		pds_lo_cnt	:  6,
+		pds_lo_state	:  3,
+		pds_lo_ste	:  1,
+		pds_lo_prio	:  4,
+		pds_lo_ax	:  1,
+		pds_lo_ecc	:  7;
+};
+
+struct md_pdir_low_exclusive_fmt {
+	/* The meaning of lower directory, exclusive */
+	u64	pde_lo_unused	: 31,
+		pde_lo_ptr	: 11,
+		pde_lo_unused1	:  6,
+		pde_lo_state	:  3,
+		pde_lo_ste	:  1,
+		pde_lo_prio	:  4,
+		pde_lo_ax	:  1,
+		pde_lo_ecc	:  7;
+};
+
+
+typedef union md_pdir_loent {
+	/* The 48 bits of premium directory, lower word */
+	u64	pd_lo_val;
+	struct md_pdir_low_exclusive_fmt pde_lo_fmt;
+	struct md_pdir_low_shared_fmt	pds_lo_fmt;
+}md_pdir_low_t;
+
+
+/*
+ *   the following two "union" definitions and two
+ *   "struct" definitions are used in vmdump.c to
+ *   represent directory memory information.
+ */
+
+typedef	union	md_dir_high	{
+        md_sdir_high_t	md_sdir_high;
+        md_pdir_high_t	md_pdir_high;
+} md_dir_high_t;
+
+typedef	union	md_dir_low	{
+        md_sdir_low_t	md_sdir_low;
+        md_pdir_low_t	md_pdir_low;
+} md_dir_low_t;
+
+typedef	struct	bddir_entry	{
+        md_dir_low_t	md_dir_low;
+        md_dir_high_t	md_dir_high;
+} bddir_entry_t;
+
+typedef struct	dir_mem_entry	{
+        u64		prcpf[MAX_REGIONS];
+        bddir_entry_t	directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE];
+} dir_mem_entry_t;
+
+
+
+typedef union md_perf_sel {
+	u64 	perf_sel_reg;
+	struct	{
+		u64	perf_rsvd : 60,
+		        perf_en   :  1,
+			perf_sel  :  3;
+	} perf_sel_bits;
+} md_perf_sel_t;
+
+typedef union md_perf_cnt {
+	u64	perf_cnt;
+	struct	{
+		u64	perf_rsvd : 44,
+	                perf_cnt  : 20;
+	} perf_cnt_bits;
+} md_perf_cnt_t;
+
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define DIR_ERROR_VALID_MASK	0xe000000000000000
+#define DIR_ERROR_VALID_SHFT	61
+#define DIR_ERROR_VALID_UCE	0x8000000000000000
+#define DIR_ERROR_VALID_AE	0x4000000000000000
+#define DIR_ERROR_VALID_CE	0x2000000000000000
+
+#define MEM_ERROR_VALID_MASK	0xc000000000000000
+#define MEM_ERROR_VALID_SHFT	62
+#define MEM_ERROR_VALID_UCE	0x8000000000000000
+#define MEM_ERROR_VALID_CE	0x4000000000000000
+
+#define PROTO_ERROR_VALID_MASK	0x8000000000000000
+
+#define MISC_ERROR_VALID_MASK	0x3ff
+
+/*
+ * Mask for hspec address that is stored in the dir error register.
+ * This represents bits 29 through 3.
+ */
+#define DIR_ERR_HSPEC_MASK	0x3ffffff8
+#define ERROR_HSPEC_MASK	0x3ffffff8
+#define ERROR_HSPEC_SHFT	3
+#define ERROR_ADDR_MASK		0xfffffff8
+#define ERROR_ADDR_SHFT		3
+
+/*
+ * MD_MISC_ERROR register defines.
+ */
+
+#define MMCE_VALID_MASK		0x3ff
+#define MMCE_ILL_MSG_SHFT	8
+#define MMCE_ILL_MSG_MASK	(UINT64_CAST 0x03 << MMCE_ILL_MSG_SHFT)
+#define MMCE_ILL_REV_SHFT	6
+#define MMCE_ILL_REV_MASK	(UINT64_CAST 0x03 << MMCE_ILL_REV_SHFT)
+#define MMCE_LONG_PACK_SHFT	4
+#define MMCE_LONG_PACK_MASK	(UINT64_CAST 0x03 << MMCE_lONG_PACK_SHFT)
+#define MMCE_SHORT_PACK_SHFT	2
+#define MMCE_SHORT_PACK_MASK	(UINT64_CAST 0x03 << MMCE_SHORT_PACK_SHFT)
+#define MMCE_BAD_DATA_SHFT	0
+#define MMCE_BAD_DATA_MASK	(UINT64_CAST 0x03 << MMCE_BAD_DATA_SHFT)
+
+
+#define MD_PERF_COUNTERS	6
+#define MD_PERF_SETS		6
+
+#define MEM_DIMM_MASK				0xe0000000
+#define MEM_DIMM_SHFT				29
+
+#endif /* _ASM_SN_SN0_HUBMD_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h
new file mode 100644
index 0000000..b40d3ef
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubni.h
@@ -0,0 +1,255 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubni.h>, Revision 1.27.
+ *
+ * Copyright (C) 1992-1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SGI_SN0_HUBNI_H
+#define _ASM_SGI_SN0_HUBNI_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+/*
+ * Hub Network Interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ */
+
+#define NI_BASE			0x600000
+#define NI_BASE_TABLES		0x630000
+
+#define NI_STATUS_REV_ID	0x600000 /* Hub network status, rev, and ID */
+#define NI_PORT_RESET		0x600008 /* Reset the network interface     */
+#define NI_PROTECTION		0x600010 /* NI register access permissions  */
+#define NI_GLOBAL_PARMS		0x600018 /* LLP parameters 		    */
+#define NI_SCRATCH_REG0		0x600100 /* Scratch register 0 (64 bits)    */
+#define NI_SCRATCH_REG1		0x600108 /* Scratch register 1 (64 bits)    */
+#define NI_DIAG_PARMS		0x600110 /* Parameters for diags	    */
+
+#define NI_VECTOR_PARMS		0x600200 /* Vector PIO routing parameters   */
+#define NI_VECTOR		0x600208 /* Vector PIO route 		    */
+#define NI_VECTOR_DATA		0x600210 /* Vector PIO data 		    */
+#define NI_VECTOR_STATUS	0x600300 /* Vector PIO return status 	    */
+#define NI_RETURN_VECTOR	0x600308 /* Vector PIO return vector 	    */
+#define NI_VECTOR_READ_DATA	0x600310 /* Vector PIO read data 	    */
+#define NI_VECTOR_CLEAR		0x600380 /* Vector PIO read & clear status  */
+
+#define NI_IO_PROTECT		0x600400 /* PIO protection bits 	    */
+#define NI_IO_PROT_OVRRD	0x600408 /* PIO protection bit override     */
+
+#define NI_AGE_CPU0_MEMORY	0x600500 /* CPU 0 memory age control 	    */
+#define NI_AGE_CPU0_PIO		0x600508 /* CPU 0 PIO age control 	    */
+#define NI_AGE_CPU1_MEMORY	0x600510 /* CPU 1 memory age control 	    */
+#define NI_AGE_CPU1_PIO		0x600518 /* CPU 1 PIO age control 	    */
+#define NI_AGE_GBR_MEMORY	0x600520 /* GBR memory age control 	    */
+#define NI_AGE_GBR_PIO		0x600528 /* GBR PIO age control 	    */
+#define NI_AGE_IO_MEMORY	0x600530 /* IO memory age control 	    */
+#define NI_AGE_IO_PIO		0x600538 /* IO PIO age control 		    */
+#define NI_AGE_REG_MIN		NI_AGE_CPU0_MEMORY
+#define NI_AGE_REG_MAX		NI_AGE_IO_PIO
+
+#define NI_PORT_PARMS		0x608000 /* LLP Parameters 		    */
+#define NI_PORT_ERROR		0x608008 /* LLP Errors 			    */
+#define NI_PORT_ERROR_CLEAR	0x608088 /* Clear the error bits 	    */
+
+#define NI_META_TABLE0		0x638000 /* First meta routing table entry  */
+#define NI_META_TABLE(_x)	(NI_META_TABLE0 + (8 * (_x)))
+#define NI_META_ENTRIES		32
+
+#define NI_LOCAL_TABLE0		0x638100 /* First local routing table entry */
+#define NI_LOCAL_TABLE(_x)	(NI_LOCAL_TABLE0 + (8 * (_x)))
+#define NI_LOCAL_ENTRIES	16
+
+/*
+ * NI_STATUS_REV_ID mask and shift definitions
+ * Have to use UINT64_CAST instead of 'L' suffix, for assembler.
+ */
+
+#define NSRI_8BITMODE_SHFT	30
+#define NSRI_8BITMODE_MASK	(UINT64_CAST 0x1 << 30)
+#define NSRI_LINKUP_SHFT	29
+#define NSRI_LINKUP_MASK	(UINT64_CAST 0x1 << 29)
+#define NSRI_DOWNREASON_SHFT	28		/* 0=failed, 1=never came   */
+#define NSRI_DOWNREASON_MASK	(UINT64_CAST 0x1 << 28)	/*    out of reset. */
+#define NSRI_MORENODES_SHFT	18
+#define NSRI_MORENODES_MASK	(UINT64_CAST 1 << 18)	/* Max. # of nodes  */
+#define	 MORE_MEMORY		0
+#define	 MORE_NODES		1
+#define NSRI_REGIONSIZE_SHFT	17
+#define NSRI_REGIONSIZE_MASK	(UINT64_CAST 1 << 17)	/* Granularity 	    */
+#define	 REGIONSIZE_FINE	1
+#define	 REGIONSIZE_COARSE	0
+#define NSRI_NODEID_SHFT	8
+#define NSRI_NODEID_MASK	(UINT64_CAST 0x1ff << 8)/* Node (Hub) ID    */
+#define NSRI_REV_SHFT		4
+#define NSRI_REV_MASK		(UINT64_CAST 0xf << 4)	/* Chip Revision    */
+#define NSRI_CHIPID_SHFT	0
+#define NSRI_CHIPID_MASK	(UINT64_CAST 0xf)	/* Chip type ID     */
+
+/*
+ * In fine mode, each node is a region.  In coarse mode, there are
+ * eight nodes per region.
+ */
+#define NASID_TO_FINEREG_SHFT	0
+#define NASID_TO_COARSEREG_SHFT	3
+
+/* NI_PORT_RESET mask definitions */
+
+#define NPR_PORTRESET		(UINT64_CAST 1 << 7)	/* Send warm reset  */
+#define NPR_LINKRESET		(UINT64_CAST 1 << 1)	/* Send link reset  */
+#define NPR_LOCALRESET		(UINT64_CAST 1)		/* Reset entire hub */
+
+/* NI_PROTECTION mask and shift definitions */
+
+#define NPROT_RESETOK		(UINT64_CAST 1)
+
+/* NI_GLOBAL_PARMS mask and shift definitions */
+
+#define NGP_MAXRETRY_SHFT	48		/* Maximum retries  	    */
+#define NGP_MAXRETRY_MASK	(UINT64_CAST 0x3ff << 48)
+#define NGP_TAILTOWRAP_SHFT	32		/* Tail timeout wrap 	    */
+#define NGP_TAILTOWRAP_MASK	(UINT64_CAST 0xffff << 32)
+
+#define NGP_CREDITTOVAL_SHFT	16		/* Tail timeout wrap 	    */
+#define NGP_CREDITTOVAL_MASK	(UINT64_CAST 0xf << 16)
+#define NGP_TAILTOVAL_SHFT	4		/* Tail timeout value 	    */
+#define NGP_TAILTOVAL_MASK	(UINT64_CAST 0xf << 4)
+
+/* NI_DIAG_PARMS mask and shift definitions */
+
+#define NDP_PORTTORESET		(UINT64_CAST 1 << 18)	/* Port tmout reset */
+#define NDP_LLP8BITMODE		(UINT64_CAST 1 << 12)	/* LLP 8-bit mode   */
+#define NDP_PORTDISABLE		(UINT64_CAST 1 <<  6)	/* Port disable     */
+#define NDP_SENDERROR		(UINT64_CAST 1)		/* Send data error  */
+
+/*
+ * NI_VECTOR_PARMS mask and shift definitions.
+ * TYPE may be any of the first four PIOTYPEs defined under NI_VECTOR_STATUS.
+ */
+
+#define NVP_PIOID_SHFT		40
+#define NVP_PIOID_MASK		(UINT64_CAST 0x3ff << 40)
+#define NVP_WRITEID_SHFT	32
+#define NVP_WRITEID_MASK	(UINT64_CAST 0xff << 32)
+#define NVP_ADDRESS_MASK	(UINT64_CAST 0xffff8)	/* Bits 19:3 	    */
+#define NVP_TYPE_SHFT		0
+#define NVP_TYPE_MASK		(UINT64_CAST 0x3)
+
+/* NI_VECTOR_STATUS mask and shift definitions */
+
+#define NVS_VALID		(UINT64_CAST 1 << 63)
+#define NVS_OVERRUN		(UINT64_CAST 1 << 62)
+#define NVS_TARGET_SHFT		51
+#define NVS_TARGET_MASK		(UINT64_CAST 0x3ff << 51)
+#define NVS_PIOID_SHFT		40
+#define NVS_PIOID_MASK		(UINT64_CAST 0x3ff << 40)
+#define NVS_WRITEID_SHFT	32
+#define NVS_WRITEID_MASK	(UINT64_CAST 0xff << 32)
+#define NVS_ADDRESS_MASK	(UINT64_CAST 0xfffffff8)   /* Bits 31:3     */
+#define NVS_TYPE_SHFT		0
+#define NVS_TYPE_MASK		(UINT64_CAST 0x7)
+#define NVS_ERROR_MASK		(UINT64_CAST 0x4)  /* bit set means error */
+
+
+#define	 PIOTYPE_READ		0	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_WRITE		1	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_UNDEFINED	2	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_EXCHANGE	3	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_ADDR_ERR	4	/* VECTOR_STATUS only 		    */
+#define	 PIOTYPE_CMD_ERR	5	/* VECTOR_STATUS only 		    */
+#define	 PIOTYPE_PROT_ERR	6	/* VECTOR_STATUS only 		    */
+#define	 PIOTYPE_UNKNOWN	7	/* VECTOR_STATUS only 		    */
+
+/* NI_AGE_XXX mask and shift definitions */
+
+#define NAGE_VCH_SHFT		10
+#define NAGE_VCH_MASK		(UINT64_CAST 3 << 10)
+#define NAGE_CC_SHFT		8
+#define NAGE_CC_MASK		(UINT64_CAST 3 << 8)
+#define NAGE_AGE_SHFT		0
+#define NAGE_AGE_MASK		(UINT64_CAST 0xff)
+#define NAGE_MASK		(NAGE_VCH_MASK | NAGE_CC_MASK | NAGE_AGE_MASK)
+
+#define	 VCHANNEL_A		0
+#define	 VCHANNEL_B		1
+#define	 VCHANNEL_ANY		2
+
+/* NI_PORT_PARMS mask and shift definitions */
+
+#define NPP_NULLTO_SHFT		10
+#define NPP_NULLTO_MASK		(UINT64_CAST 0x3f << 16)
+#define NPP_MAXBURST_SHFT	0
+#define NPP_MAXBURST_MASK	(UINT64_CAST 0x3ff)
+#define NPP_RESET_DFLT_HUB20	((UINT64_CAST 1	    << NPP_NULLTO_SHFT) | \
+				 (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT))
+#define NPP_RESET_DEFAULTS	((UINT64_CAST 6	    << NPP_NULLTO_SHFT) | \
+				 (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT))
+
+
+/* NI_PORT_ERROR mask and shift definitions */
+
+#define NPE_LINKRESET		(UINT64_CAST 1 << 37)
+#define NPE_INTERNALERROR	(UINT64_CAST 1 << 36)
+#define NPE_BADMESSAGE		(UINT64_CAST 1 << 35)
+#define NPE_BADDEST		(UINT64_CAST 1 << 34)
+#define NPE_FIFOOVERFLOW	(UINT64_CAST 1 << 33)
+#define NPE_CREDITTO_SHFT	28
+#define NPE_CREDITTO_MASK	(UINT64_CAST 0xf << 28)
+#define NPE_TAILTO_SHFT		24
+#define NPE_TAILTO_MASK		(UINT64_CAST 0xf << 24)
+#define NPE_RETRYCOUNT_SHFT	16
+#define NPE_RETRYCOUNT_MASK	(UINT64_CAST 0xff << 16)
+#define NPE_CBERRCOUNT_SHFT	8
+#define NPE_CBERRCOUNT_MASK	(UINT64_CAST 0xff << 8)
+#define NPE_SNERRCOUNT_SHFT	0
+#define NPE_SNERRCOUNT_MASK	(UINT64_CAST 0xff << 0)
+#define NPE_MASK		0x3effffffff
+
+#define NPE_COUNT_MAX		0xff
+
+#define NPE_FATAL_ERRORS	(NPE_LINKRESET | NPE_INTERNALERROR |	\
+				 NPE_BADMESSAGE | NPE_BADDEST |		\
+				 NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK |	\
+				 NPE_TAILTO_MASK)
+
+/* NI_META_TABLE mask and shift definitions */
+
+#define NMT_EXIT_PORT_MASK (UINT64_CAST 0xf)
+
+/* NI_LOCAL_TABLE mask and shift definitions */
+
+#define NLT_EXIT_PORT_MASK (UINT64_CAST 0xf)
+
+#ifndef __ASSEMBLY__
+
+typedef union	hubni_port_error_u {
+	u64	nipe_reg_value;
+	struct {
+	    u64	nipe_rsvd:	26,	/* unused */
+		nipe_lnk_reset:	 1,	/* link reset */
+		nipe_intl_err:	 1,	/* internal error */
+		nipe_bad_msg:	 1,	/* bad message */
+		nipe_bad_dest:	 1,	/* bad dest	*/
+		nipe_fifo_ovfl:	 1,	/* fifo overflow */
+		nipe_rsvd1:	 1,	/* unused */
+		nipe_credit_to:	 4,	/* credit timeout */
+		nipe_tail_to:	 4,	/* tail timeout */
+		nipe_retry_cnt:	 8,	/* retry error count */
+		nipe_cb_cnt:	 8,	/* checkbit error count */
+		nipe_sn_cnt:	 8;	/* sequence number count */
+	} nipe_fields_s;
+} hubni_port_error_t;
+
+#define NI_LLP_RETRY_MAX	0xff
+#define NI_LLP_CB_MAX		0xff
+#define NI_LLP_SN_MAX		0xff
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SGI_SN0_HUBNI_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubpi.h b/arch/mips/include/asm/sn/sn0/hubpi.h
new file mode 100644
index 0000000..e39f5f9
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubpi.h
@@ -0,0 +1,409 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubpi.h>, revision 1.28.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef	_ASM_SN_SN0_HUBPI_H
+#define	_ASM_SN_SN0_HUBPI_H
+
+#include <linux/types.h>
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * All register "addresses" are actually offsets.  Use the LOCAL_HUB
+ * or REMOTE_HUB macros to synthesize an actual address
+ */
+
+#define PI_BASE			0x000000
+
+/* General protection and control registers */
+
+#define PI_CPU_PROTECT		0x000000 /* CPU Protection 		    */
+#define PI_PROT_OVERRD		0x000008 /* Clear CPU Protection bit 	    */
+#define	PI_IO_PROTECT		0x000010 /* Interrupt Pending Protection    */
+#define PI_REGION_PRESENT	0x000018 /* Indicates whether region exists */
+#define PI_CPU_NUM		0x000020 /* CPU Number ID 		    */
+#define PI_CALIAS_SIZE		0x000028 /* Cached Alias Size 		    */
+#define PI_MAX_CRB_TIMEOUT	0x000030 /* Maximum Timeout for CRB 	    */
+#define PI_CRB_SFACTOR		0x000038 /* Scale factor for CRB timeout    */
+
+/* CALIAS values */
+#define PI_CALIAS_SIZE_0	0
+#define PI_CALIAS_SIZE_4K	1
+#define PI_CALIAS_SIZE_8K	2
+#define PI_CALIAS_SIZE_16K	3
+#define PI_CALIAS_SIZE_32K	4
+#define PI_CALIAS_SIZE_64K	5
+#define PI_CALIAS_SIZE_128K	6
+#define PI_CALIAS_SIZE_256K	7
+#define PI_CALIAS_SIZE_512K	8
+#define PI_CALIAS_SIZE_1M	9
+#define PI_CALIAS_SIZE_2M	10
+#define PI_CALIAS_SIZE_4M	11
+#define PI_CALIAS_SIZE_8M	12
+#define PI_CALIAS_SIZE_16M	13
+#define PI_CALIAS_SIZE_32M	14
+#define PI_CALIAS_SIZE_64M	15
+
+/* Processor control and status checking */
+
+#define PI_CPU_PRESENT_A	0x000040 /* CPU Present A 		    */
+#define PI_CPU_PRESENT_B	0x000048 /* CPU Present B 		    */
+#define PI_CPU_ENABLE_A		0x000050 /* CPU Enable A 		    */
+#define PI_CPU_ENABLE_B		0x000058 /* CPU Enable B 		    */
+#define PI_REPLY_LEVEL		0x000060 /* Reply Level		 	    */
+#define PI_HARDRESET_BIT	0x020068 /* Bit cleared by s/w on SR	    */
+#define PI_NMI_A		0x000070 /* NMI to CPU A 		    */
+#define PI_NMI_B		0x000078 /* NMI to CPU B 		    */
+#define PI_NMI_OFFSET		(PI_NMI_B - PI_NMI_A)
+#define PI_SOFTRESET		0x000080 /* Softreset (to both CPUs) 	    */
+
+/* Regular Interrupt register checking.  */
+
+#define PI_INT_PEND_MOD		0x000090 /* Write to set pending ints	    */
+#define PI_INT_PEND0		0x000098 /* Read to get pending ints 	    */
+#define PI_INT_PEND1		0x0000a0 /* Read to get pending ints 	    */
+#define PI_INT_MASK0_A		0x0000a8 /* Interrupt Mask 0 for CPU A 	    */
+#define PI_INT_MASK1_A		0x0000b0 /* Interrupt Mask 1 for CPU A 	    */
+#define PI_INT_MASK0_B		0x0000b8 /* Interrupt Mask 0 for CPU B 	    */
+#define PI_INT_MASK1_B		0x0000c0 /* Interrupt Mask 1 for CPU B 	    */
+
+#define PI_INT_MASK_OFFSET	0x10	 /* Offset from A to B 		    */
+
+/* Crosscall interrupts */
+
+#define PI_CC_PEND_SET_A	0x0000c8 /* CC Interrupt Pending Set, CPU A */
+#define PI_CC_PEND_SET_B	0x0000d0 /* CC Interrupt Pending Set, CPU B */
+#define PI_CC_PEND_CLR_A	0x0000d8 /* CC Interrupt Pending Clr, CPU A */
+#define PI_CC_PEND_CLR_B	0x0000e0 /* CC Interrupt Pending Clr, CPU B */
+#define PI_CC_MASK		0x0000e8 /* CC Interrupt mask 		    */
+
+#define PI_INT_SET_OFFSET	0x08	 /* Offset from A to B 		    */
+
+/* Realtime Counter and Profiler control registers */
+
+#define PI_RT_COUNT		0x030100 /* Real Time Counter 		    */
+#define PI_RT_COMPARE_A		0x000108 /* Real Time Compare A 	    */
+#define PI_RT_COMPARE_B		0x000110 /* Real Time Compare B 	    */
+#define PI_PROFILE_COMPARE	0x000118 /* L5 int to both cpus when == RTC */
+#define PI_RT_PEND_A		0x000120 /* Set if RT int for A pending     */
+#define PI_RT_PEND_B		0x000128 /* Set if RT int for B pending     */
+#define PI_PROF_PEND_A		0x000130 /* Set if Prof int for A pending   */
+#define PI_PROF_PEND_B		0x000138 /* Set if Prof int for B pending   */
+#define PI_RT_EN_A		0x000140 /* RT int for CPU A enable 	    */
+#define PI_RT_EN_B		0x000148 /* RT int for CPU B enable 	    */
+#define PI_PROF_EN_A		0x000150 /* PROF int for CPU A enable 	    */
+#define PI_PROF_EN_B		0x000158 /* PROF int for CPU B enable 	    */
+#define PI_RT_LOCAL_CTRL	0x000160 /* RT control register 	    */
+#define PI_RT_FILTER_CTRL	0x000168 /* GCLK Filter control register    */
+
+#define PI_COUNT_OFFSET		0x08	 /* A to B offset for all counts    */
+
+/* Built-In Self Test support */
+
+#define PI_BIST_WRITE_DATA	0x000200 /* BIST write data 		    */
+#define PI_BIST_READ_DATA	0x000208 /* BIST read data 		    */
+#define PI_BIST_COUNT_TARG	0x000210 /* BIST Count and Target 	    */
+#define PI_BIST_READY		0x000218 /* BIST Ready indicator 	    */
+#define PI_BIST_SHIFT_LOAD	0x000220 /* BIST control 		    */
+#define PI_BIST_SHIFT_UNLOAD	0x000228 /* BIST control 		    */
+#define PI_BIST_ENTER_RUN	0x000230 /* BIST control 		    */
+
+/* Graphics control registers */
+
+#define PI_GFX_PAGE_A		0x000300 /* Graphics page A 		    */
+#define PI_GFX_CREDIT_CNTR_A	0x000308 /* Graphics credit counter A 	    */
+#define PI_GFX_BIAS_A		0x000310 /* Graphics bias A 		    */
+#define PI_GFX_INT_CNTR_A	0x000318 /* Graphics interrupt counter A    */
+#define PI_GFX_INT_CMP_A	0x000320 /* Graphics interrupt comparator A */
+#define PI_GFX_PAGE_B		0x000328 /* Graphics page B 		    */
+#define PI_GFX_CREDIT_CNTR_B	0x000330 /* Graphics credit counter B 	    */
+#define PI_GFX_BIAS_B		0x000338 /* Graphics bias B 		    */
+#define PI_GFX_INT_CNTR_B	0x000340 /* Graphics interrupt counter B    */
+#define PI_GFX_INT_CMP_B	0x000348 /* Graphics interrupt comparator B */
+
+#define PI_GFX_OFFSET		(PI_GFX_PAGE_B - PI_GFX_PAGE_A)
+#define PI_GFX_PAGE_ENABLE	0x0000010000000000LL
+
+/* Error and timeout registers */
+#define PI_ERR_INT_PEND		0x000400 /* Error Interrupt Pending	    */
+#define PI_ERR_INT_MASK_A	0x000408 /* Error Interrupt mask for CPU A  */
+#define PI_ERR_INT_MASK_B	0x000410 /* Error Interrupt mask for CPU B  */
+#define PI_ERR_STACK_ADDR_A	0x000418 /* Error stack address for CPU A   */
+#define PI_ERR_STACK_ADDR_B	0x000420 /* Error stack address for CPU B   */
+#define PI_ERR_STACK_SIZE	0x000428 /* Error Stack Size 		    */
+#define PI_ERR_STATUS0_A	0x000430 /* Error Status 0A 		    */
+#define PI_ERR_STATUS0_A_RCLR	0x000438 /* Error Status 0A clear on read   */
+#define PI_ERR_STATUS1_A	0x000440 /* Error Status 1A 		    */
+#define PI_ERR_STATUS1_A_RCLR	0x000448 /* Error Status 1A clear on read   */
+#define PI_ERR_STATUS0_B	0x000450 /* Error Status 0B 		    */
+#define PI_ERR_STATUS0_B_RCLR	0x000458 /* Error Status 0B clear on read   */
+#define PI_ERR_STATUS1_B	0x000460 /* Error Status 1B 		    */
+#define PI_ERR_STATUS1_B_RCLR	0x000468 /* Error Status 1B clear on read   */
+#define PI_SPOOL_CMP_A		0x000470 /* Spool compare for CPU A 	    */
+#define PI_SPOOL_CMP_B		0x000478 /* Spool compare for CPU B 	    */
+#define PI_CRB_TIMEOUT_A	0x000480 /* Timed out CRB entries for A     */
+#define PI_CRB_TIMEOUT_B	0x000488 /* Timed out CRB entries for B     */
+#define PI_SYSAD_ERRCHK_EN	0x000490 /* Enables SYSAD error checking    */
+#define PI_BAD_CHECK_BIT_A	0x000498 /* Force SYSAD check bit error     */
+#define PI_BAD_CHECK_BIT_B	0x0004a0 /* Force SYSAD check bit error     */
+#define PI_NACK_CNT_A		0x0004a8 /* Consecutive NACK counter 	    */
+#define PI_NACK_CNT_B		0x0004b0 /* 	"	" for CPU B 	    */
+#define PI_NACK_CMP		0x0004b8 /* NACK count compare		    */
+#define PI_STACKADDR_OFFSET	(PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A)
+#define PI_ERRSTAT_OFFSET	(PI_ERR_STATUS0_B - PI_ERR_STATUS0_A)
+#define PI_RDCLR_OFFSET		(PI_ERR_STATUS0_A_RCLR - PI_ERR_STATUS0_A)
+
+/* Bits in PI_ERR_INT_PEND */
+#define PI_ERR_SPOOL_CMP_B	0x00000001	/* Spool end hit high water */
+#define PI_ERR_SPOOL_CMP_A	0x00000002
+#define PI_ERR_SPUR_MSG_B	0x00000004	/* Spurious message intr.   */
+#define PI_ERR_SPUR_MSG_A	0x00000008
+#define PI_ERR_WRB_TERR_B	0x00000010	/* WRB TERR		    */
+#define PI_ERR_WRB_TERR_A	0x00000020
+#define PI_ERR_WRB_WERR_B	0x00000040	/* WRB WERR 		    */
+#define PI_ERR_WRB_WERR_A	0x00000080
+#define PI_ERR_SYSSTATE_B	0x00000100	/* SysState parity error    */
+#define PI_ERR_SYSSTATE_A	0x00000200
+#define PI_ERR_SYSAD_DATA_B	0x00000400	/* SysAD data parity error  */
+#define PI_ERR_SYSAD_DATA_A	0x00000800
+#define PI_ERR_SYSAD_ADDR_B	0x00001000	/* SysAD addr parity error  */
+#define PI_ERR_SYSAD_ADDR_A	0x00002000
+#define PI_ERR_SYSCMD_DATA_B	0x00004000	/* SysCmd data parity error */
+#define PI_ERR_SYSCMD_DATA_A	0x00008000
+#define PI_ERR_SYSCMD_ADDR_B	0x00010000	/* SysCmd addr parity error */
+#define PI_ERR_SYSCMD_ADDR_A	0x00020000
+#define PI_ERR_BAD_SPOOL_B	0x00040000	/* Error spooling to memory */
+#define PI_ERR_BAD_SPOOL_A	0x00080000
+#define PI_ERR_UNCAC_UNCORR_B	0x00100000	/* Uncached uncorrectable   */
+#define PI_ERR_UNCAC_UNCORR_A	0x00200000
+#define PI_ERR_SYSSTATE_TAG_B	0x00400000	/* SysState tag parity error */
+#define PI_ERR_SYSSTATE_TAG_A	0x00800000
+#define PI_ERR_MD_UNCORR	0x01000000	/* Must be cleared in MD    */
+
+#define PI_ERR_CLEAR_ALL_A	0x00aaaaaa
+#define PI_ERR_CLEAR_ALL_B	0x00555555
+
+
+/*
+ * The following three macros define all possible error int pends.
+ */
+
+#define PI_FATAL_ERR_CPU_A	(PI_ERR_SYSSTATE_TAG_A 	| \
+				 PI_ERR_BAD_SPOOL_A 	| \
+				 PI_ERR_SYSCMD_ADDR_A 	| \
+				 PI_ERR_SYSCMD_DATA_A 	| \
+				 PI_ERR_SYSAD_ADDR_A 	| \
+				 PI_ERR_SYSAD_DATA_A	| \
+				 PI_ERR_SYSSTATE_A)
+
+#define PI_MISC_ERR_CPU_A	(PI_ERR_UNCAC_UNCORR_A 	| \
+				 PI_ERR_WRB_WERR_A 	| \
+				 PI_ERR_WRB_TERR_A 	| \
+				 PI_ERR_SPUR_MSG_A 	| \
+				 PI_ERR_SPOOL_CMP_A)
+
+#define PI_FATAL_ERR_CPU_B	(PI_ERR_SYSSTATE_TAG_B 	| \
+				 PI_ERR_BAD_SPOOL_B 	| \
+				 PI_ERR_SYSCMD_ADDR_B 	| \
+				 PI_ERR_SYSCMD_DATA_B 	| \
+				 PI_ERR_SYSAD_ADDR_B 	| \
+				 PI_ERR_SYSAD_DATA_B	| \
+				 PI_ERR_SYSSTATE_B)
+
+#define PI_MISC_ERR_CPU_B 	(PI_ERR_UNCAC_UNCORR_B  | \
+				 PI_ERR_WRB_WERR_B 	| \
+				 PI_ERR_WRB_TERR_B 	| \
+				 PI_ERR_SPUR_MSG_B 	| \
+				 PI_ERR_SPOOL_CMP_B)
+
+#define PI_ERR_GENERIC	(PI_ERR_MD_UNCORR)
+
+/*
+ * Error types for PI_ERR_STATUS0_[AB] and error stack:
+ * Use the write types if WRBRRB is 1 else use the read types
+ */
+
+/* Fields in PI_ERR_STATUS0_[AB] */
+#define PI_ERR_ST0_TYPE_MASK	0x0000000000000007
+#define PI_ERR_ST0_TYPE_SHFT	0
+#define PI_ERR_ST0_REQNUM_MASK	0x0000000000000038
+#define PI_ERR_ST0_REQNUM_SHFT	3
+#define PI_ERR_ST0_SUPPL_MASK	0x000000000001ffc0
+#define PI_ERR_ST0_SUPPL_SHFT	6
+#define PI_ERR_ST0_CMD_MASK	0x0000000001fe0000
+#define PI_ERR_ST0_CMD_SHFT	17
+#define PI_ERR_ST0_ADDR_MASK	0x3ffffffffe000000
+#define PI_ERR_ST0_ADDR_SHFT	25
+#define PI_ERR_ST0_OVERRUN_MASK	0x4000000000000000
+#define PI_ERR_ST0_OVERRUN_SHFT	62
+#define PI_ERR_ST0_VALID_MASK	0x8000000000000000
+#define PI_ERR_ST0_VALID_SHFT	63
+
+/* Fields in PI_ERR_STATUS1_[AB] */
+#define PI_ERR_ST1_SPOOL_MASK	0x00000000001fffff
+#define PI_ERR_ST1_SPOOL_SHFT	0
+#define PI_ERR_ST1_TOUTCNT_MASK	0x000000001fe00000
+#define PI_ERR_ST1_TOUTCNT_SHFT	21
+#define PI_ERR_ST1_INVCNT_MASK	0x0000007fe0000000
+#define PI_ERR_ST1_INVCNT_SHFT	29
+#define PI_ERR_ST1_CRBNUM_MASK	0x0000038000000000
+#define PI_ERR_ST1_CRBNUM_SHFT	39
+#define PI_ERR_ST1_WRBRRB_MASK	0x0000040000000000
+#define PI_ERR_ST1_WRBRRB_SHFT	42
+#define PI_ERR_ST1_CRBSTAT_MASK	0x001ff80000000000
+#define PI_ERR_ST1_CRBSTAT_SHFT	43
+#define PI_ERR_ST1_MSGSRC_MASK	0xffe0000000000000
+#define PI_ERR_ST1_MSGSRC_SHFT	53
+
+/* Fields in the error stack */
+#define PI_ERR_STK_TYPE_MASK	0x0000000000000003
+#define PI_ERR_STK_TYPE_SHFT	0
+#define PI_ERR_STK_SUPPL_MASK	0x0000000000000038
+#define PI_ERR_STK_SUPPL_SHFT	3
+#define PI_ERR_STK_REQNUM_MASK	0x00000000000001c0
+#define PI_ERR_STK_REQNUM_SHFT	6
+#define PI_ERR_STK_CRBNUM_MASK	0x0000000000000e00
+#define PI_ERR_STK_CRBNUM_SHFT	9
+#define PI_ERR_STK_WRBRRB_MASK	0x0000000000001000
+#define PI_ERR_STK_WRBRRB_SHFT	12
+#define PI_ERR_STK_CRBSTAT_MASK	0x00000000007fe000
+#define PI_ERR_STK_CRBSTAT_SHFT	13
+#define PI_ERR_STK_CMD_MASK	0x000000007f800000
+#define PI_ERR_STK_CMD_SHFT	23
+#define PI_ERR_STK_ADDR_MASK	0xffffffff80000000
+#define PI_ERR_STK_ADDR_SHFT	31
+
+/* Error type in the error status or stack on Read CRBs */
+#define PI_ERR_RD_PRERR		1
+#define PI_ERR_RD_DERR		2
+#define PI_ERR_RD_TERR		3
+
+/* Error type in the error status or stack on Write CRBs */
+#define PI_ERR_WR_WERR		0
+#define PI_ERR_WR_PWERR		1
+#define PI_ERR_WR_TERR		3
+
+/* Read or Write CRB in error status or stack */
+#define PI_ERR_RRB	0
+#define PI_ERR_WRB	1
+#define PI_ERR_ANY_CRB	2
+
+/* Address masks in the error status and error stack are not the same */
+#define ERR_STK_ADDR_SHFT	7
+#define ERR_STAT0_ADDR_SHFT	3
+
+#define PI_MIN_STACK_SIZE 4096	/* For figuring out the size to set */
+#define PI_STACK_SIZE_SHFT	12	/* 4k */
+
+#define ERR_STACK_SIZE_BYTES(_sz) \
+       ((_sz) ? (PI_MIN_STACK_SIZE << ((_sz) - 1)) : 0)
+
+#ifndef __ASSEMBLY__
+/*
+ * format of error stack and error status registers.
+ */
+
+struct err_stack_format {
+	u64	sk_addr	   : 33,   /* address */
+		sk_cmd	   :  8,   /* message command */
+		sk_crb_sts : 10,   /* status from RRB or WRB */
+		sk_rw_rb   :  1,   /* RRB == 0, WRB == 1 */
+		sk_crb_num :  3,   /* WRB (0 to 7) or RRB (0 to 4) */
+		sk_t5_req  :  3,   /* RRB T5 request number */
+		sk_suppl   :  3,   /* lowest 3 bit of supplemental */
+		sk_err_type:  3;   /* error type	*/
+};
+
+typedef union pi_err_stack {
+	u64	pi_stk_word;
+	struct	err_stack_format pi_stk_fmt;
+} pi_err_stack_t;
+
+struct err_status0_format {
+	u64	s0_valid   :  1,   /* Valid */
+		s0_ovr_run :  1,   /* Overrun, spooled to memory */
+		s0_addr	   : 37,   /* address */
+		s0_cmd	   :  8,   /* message command */
+		s0_supl	   : 11,   /* message supplemental field */
+		s0_t5_req  :  3,   /* RRB T5 request number */
+		s0_err_type:  3;   /* error type */
+};
+
+typedef union pi_err_stat0 {
+	u64	pi_stat0_word;
+	struct err_status0_format pi_stat0_fmt;
+} pi_err_stat0_t;
+
+struct err_status1_format {
+	u64	s1_src	   : 11,   /* message source */
+		s1_crb_sts : 10,   /* status from RRB or WRB */
+		s1_rw_rb   :  1,   /* RRB == 0, WRB == 1 */
+		s1_crb_num :  3,   /* WRB (0 to 7) or RRB (0 to 4) */
+		s1_inval_cnt:10,   /* signed invalidate counter RRB */
+		s1_to_cnt  :  8,   /* crb timeout counter */
+		s1_spl_cnt : 21;   /* number spooled to memory */
+};
+
+typedef union pi_err_stat1 {
+	u64	pi_stat1_word;
+	struct err_status1_format pi_stat1_fmt;
+} pi_err_stat1_t;
+
+typedef u64	rtc_time_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* Bits in PI_SYSAD_ERRCHK_EN */
+#define PI_SYSAD_ERRCHK_ECCGEN	0x01	/* Enable ECC generation	    */
+#define PI_SYSAD_ERRCHK_QUALGEN	0x02	/* Enable data quality signal gen.  */
+#define PI_SYSAD_ERRCHK_SADP	0x04	/* Enable SysAD parity checking     */
+#define PI_SYSAD_ERRCHK_CMDP	0x08	/* Enable SysCmd parity checking    */
+#define PI_SYSAD_ERRCHK_STATE	0x10	/* Enable SysState parity checking  */
+#define PI_SYSAD_ERRCHK_QUAL	0x20	/* Enable data quality checking     */
+#define PI_SYSAD_CHECK_ALL	0x3f	/* Generate and check all signals.  */
+
+/* Interrupt pending bits on R10000 */
+
+#define HUB_IP_PEND0		0x0400
+#define HUB_IP_PEND1_CC		0x0800
+#define HUB_IP_RT		0x1000
+#define HUB_IP_PROF		0x2000
+#define HUB_IP_ERROR		0x4000
+#define HUB_IP_MASK		0x7c00
+
+/* PI_RT_LOCAL_CTRL mask and shift definitions */
+
+#define PRLC_USE_INT_SHFT	16
+#define PRLC_USE_INT_MASK	(UINT64_CAST 1 << 16)
+#define PRLC_USE_INT		(UINT64_CAST 1 << 16)
+#define PRLC_GCLK_SHFT		15
+#define PRLC_GCLK_MASK		(UINT64_CAST 1 << 15)
+#define PRLC_GCLK		(UINT64_CAST 1 << 15)
+#define PRLC_GCLK_COUNT_SHFT	8
+#define PRLC_GCLK_COUNT_MASK	(UINT64_CAST 0x7f << 8)
+#define PRLC_MAX_COUNT_SHFT	1
+#define PRLC_MAX_COUNT_MASK	(UINT64_CAST 0x7f << 1)
+#define PRLC_GCLK_EN_SHFT	0
+#define PRLC_GCLK_EN_MASK	(UINT64_CAST 1)
+#define PRLC_GCLK_EN		(UINT64_CAST 1)
+
+/* PI_RT_FILTER_CTRL mask and shift definitions */
+
+/*
+ * Bits for NACK_CNT_A/B and NACK_CMP
+ */
+#define PI_NACK_CNT_EN_SHFT	20
+#define PI_NACK_CNT_EN_MASK	0x100000
+#define PI_NACK_CNT_MASK	0x0fffff
+#define PI_NACK_CNT_MAX		0x0fffff
+
+#endif /* _ASM_SN_SN0_HUBPI_H */
diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h
new file mode 100644
index 0000000..3c97e08
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/ip27.h
@@ -0,0 +1,85 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/IP27.h>.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2006 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_IP27_H
+#define _ASM_SN_SN0_IP27_H
+
+#include <asm/mipsregs.h>
+
+/*
+ * Simple definitions for the masks which remove SW bits from pte.
+ */
+
+#define TLBLO_HWBITSHIFT	0		/* Shift value, for masking */
+
+#ifndef __ASSEMBLY__
+
+#define CAUSE_BERRINTR 		IE_IRQ5
+
+#define ECCF_CACHE_ERR  0
+#define ECCF_TAGLO      1
+#define ECCF_ECC        2
+#define ECCF_ERROREPC   3
+#define ECCF_PADDR      4
+#define ECCF_SIZE       (5 * sizeof(long))
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * KL_GET_CPUNUM (similar to EV_GET_SPNUM for EVEREST platform) reads
+ * the processor number of the calling processor.  The proc parameters
+ * must be a register.
+ */
+#define KL_GET_CPUNUM(proc) 				\
+	dli	proc, LOCAL_HUB(0); 			\
+	ld	proc, PI_CPU_NUM(proc)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * R10000 status register interrupt bit mask usage for IP27.
+ */
+#define SRB_SWTIMO	IE_SW0		/* 0x0100 */
+#define SRB_NET		IE_SW1		/* 0x0200 */
+#define SRB_DEV0	IE_IRQ0		/* 0x0400 */
+#define SRB_DEV1	IE_IRQ1		/* 0x0800 */
+#define SRB_TIMOCLK	IE_IRQ2		/* 0x1000 */
+#define SRB_PROFCLK	IE_IRQ3		/* 0x2000 */
+#define SRB_ERR		IE_IRQ4		/* 0x4000 */
+#define SRB_SCHEDCLK	IE_IRQ5		/* 0x8000 */
+
+#define SR_IBIT_HI	SRB_DEV0
+#define SR_IBIT_PROF	SRB_PROFCLK
+
+#define SRB_SWTIMO_IDX		0
+#define SRB_NET_IDX		1
+#define SRB_DEV0_IDX		2
+#define SRB_DEV1_IDX		3
+#define SRB_TIMOCLK_IDX		4
+#define SRB_PROFCLK_IDX		5
+#define SRB_ERR_IDX		6
+#define SRB_SCHEDCLK_IDX	7
+
+#define NUM_CAUSE_INTRS		8
+
+#define SCACHE_LINESIZE	128
+#define SCACHE_LINEMASK	(SCACHE_LINESIZE - 1)
+
+#include <asm/sn/addrs.h>
+
+#define LED_CYCLE_MASK  0x0f
+#define LED_CYCLE_SHFT  4
+
+#define SEND_NMI(_nasid, _slice)	\
+          REMOTE_HUB_S((_nasid),  (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
+
+#endif /* _ASM_SN_SN0_IP27_H */
diff --git a/arch/mips/include/asm/sn/sn_private.h b/arch/mips/include/asm/sn/sn_private.h
new file mode 100644
index 0000000..1a2c302
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn_private.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_SN_SN_PRIVATE_H
+#define __ASM_SN_SN_PRIVATE_H
+
+#include <asm/sn/types.h>
+
+extern nasid_t master_nasid;
+
+extern void cpu_node_probe(void);
+extern cnodeid_t get_compact_nodeid(void);
+extern void hub_rtc_init(cnodeid_t);
+extern void cpu_time_init(void);
+extern void per_cpu_init(void);
+extern void install_cpu_nmi_handler(int slice);
+extern void install_ipi(void);
+extern void setup_replication_mask(void);
+extern void replicate_kernel_text(void);
+extern pfn_t node_getfirstfree(cnodeid_t);
+
+#endif /* __ASM_SN_SN_PRIVATE_H */
diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h
new file mode 100644
index 0000000..74d0bb2
--- /dev/null
+++ b/arch/mips/include/asm/sn/types.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_TYPES_H
+#define _ASM_SN_TYPES_H
+
+#include <linux/types.h>
+
+typedef unsigned long 	cpuid_t;
+typedef unsigned long	cnodemask_t;
+typedef signed short	nasid_t;	/* node id in numa-as-id space */
+typedef signed short	cnodeid_t;	/* node id in compact-id space */
+typedef signed char	partid_t;	/* partition ID type */
+typedef signed short	moduleid_t;	/* user-visible module number type */
+typedef signed short	cmoduleid_t;	/* kernel compact module id type */
+typedef unsigned char	clusterid_t;	/* Clusterid of the cell */
+typedef unsigned long 	pfn_t;
+
+typedef dev_t		vertex_hdl_t;	/* hardware graph vertex handle */
+
+#endif /* _ASM_SN_TYPES_H */
diff --git a/arch/mips/include/asm/sni.h b/arch/mips/include/asm/sni.h
new file mode 100644
index 0000000..8c1eb02
--- /dev/null
+++ b/arch/mips/include/asm/sni.h
@@ -0,0 +1,244 @@
+/*
+ * SNI specific definitions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1998 by Ralf Baechle
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+#ifndef __ASM_SNI_H
+#define __ASM_SNI_H
+
+extern unsigned int sni_brd_type;
+
+#define SNI_BRD_10                 2
+#define SNI_BRD_10NEW              3
+#define SNI_BRD_TOWER_OASIC        4
+#define SNI_BRD_MINITOWER          5
+#define SNI_BRD_PCI_TOWER          6
+#define SNI_BRD_RM200              7
+#define SNI_BRD_PCI_MTOWER         8
+#define SNI_BRD_PCI_DESKTOP        9
+#define SNI_BRD_PCI_TOWER_CPLUS   10
+#define SNI_BRD_PCI_MTOWER_CPLUS  11
+
+/* RM400 cpu types */
+#define SNI_CPU_M8021           0x01
+#define SNI_CPU_M8030           0x04
+#define SNI_CPU_M8031           0x06
+#define SNI_CPU_M8034           0x0f
+#define SNI_CPU_M8037           0x07
+#define SNI_CPU_M8040           0x05
+#define SNI_CPU_M8043           0x09
+#define SNI_CPU_M8050           0x0b
+#define SNI_CPU_M8053           0x0d
+
+#define SNI_PORT_BASE		CKSEG1ADDR(0xb4000000)
+
+#ifndef __MIPSEL__
+/*
+ * ASIC PCI registers for big endian configuration.
+ */
+#define PCIMT_UCONF		CKSEG1ADDR(0xbfff0004)
+#define PCIMT_IOADTIMEOUT2	CKSEG1ADDR(0xbfff000c)
+#define PCIMT_IOMEMCONF		CKSEG1ADDR(0xbfff0014)
+#define PCIMT_IOMMU		CKSEG1ADDR(0xbfff001c)
+#define PCIMT_IOADTIMEOUT1	CKSEG1ADDR(0xbfff0024)
+#define PCIMT_DMAACCESS		CKSEG1ADDR(0xbfff002c)
+#define PCIMT_DMAHIT		CKSEG1ADDR(0xbfff0034)
+#define PCIMT_ERRSTATUS		CKSEG1ADDR(0xbfff003c)
+#define PCIMT_ERRADDR		CKSEG1ADDR(0xbfff0044)
+#define PCIMT_SYNDROME		CKSEG1ADDR(0xbfff004c)
+#define PCIMT_ITPEND		CKSEG1ADDR(0xbfff0054)
+#define  IT_INT2		0x01
+#define  IT_INTD		0x02
+#define  IT_INTC		0x04
+#define  IT_INTB		0x08
+#define  IT_INTA		0x10
+#define  IT_EISA		0x20
+#define  IT_SCSI		0x40
+#define  IT_ETH			0x80
+#define PCIMT_IRQSEL		CKSEG1ADDR(0xbfff005c)
+#define PCIMT_TESTMEM		CKSEG1ADDR(0xbfff0064)
+#define PCIMT_ECCREG		CKSEG1ADDR(0xbfff006c)
+#define PCIMT_CONFIG_ADDRESS	CKSEG1ADDR(0xbfff0074)
+#define PCIMT_ASIC_ID		CKSEG1ADDR(0xbfff007c)	/* read */
+#define PCIMT_SOFT_RESET	CKSEG1ADDR(0xbfff007c)	/* write */
+#define PCIMT_PIA_OE		CKSEG1ADDR(0xbfff0084)
+#define PCIMT_PIA_DATAOUT	CKSEG1ADDR(0xbfff008c)
+#define PCIMT_PIA_DATAIN	CKSEG1ADDR(0xbfff0094)
+#define PCIMT_CACHECONF		CKSEG1ADDR(0xbfff009c)
+#define PCIMT_INVSPACE		CKSEG1ADDR(0xbfff00a4)
+#else
+/*
+ * ASIC PCI registers for little endian configuration.
+ */
+#define PCIMT_UCONF		CKSEG1ADDR(0xbfff0000)
+#define PCIMT_IOADTIMEOUT2	CKSEG1ADDR(0xbfff0008)
+#define PCIMT_IOMEMCONF		CKSEG1ADDR(0xbfff0010)
+#define PCIMT_IOMMU		CKSEG1ADDR(0xbfff0018)
+#define PCIMT_IOADTIMEOUT1	CKSEG1ADDR(0xbfff0020)
+#define PCIMT_DMAACCESS		CKSEG1ADDR(0xbfff0028)
+#define PCIMT_DMAHIT		CKSEG1ADDR(0xbfff0030)
+#define PCIMT_ERRSTATUS		CKSEG1ADDR(0xbfff0038)
+#define PCIMT_ERRADDR		CKSEG1ADDR(0xbfff0040)
+#define PCIMT_SYNDROME		CKSEG1ADDR(0xbfff0048)
+#define PCIMT_ITPEND		CKSEG1ADDR(0xbfff0050)
+#define  IT_INT2		0x01
+#define  IT_INTD		0x02
+#define  IT_INTC		0x04
+#define  IT_INTB		0x08
+#define  IT_INTA		0x10
+#define  IT_EISA		0x20
+#define  IT_SCSI		0x40
+#define  IT_ETH			0x80
+#define PCIMT_IRQSEL		CKSEG1ADDR(0xbfff0058)
+#define PCIMT_TESTMEM		CKSEG1ADDR(0xbfff0060)
+#define PCIMT_ECCREG		CKSEG1ADDR(0xbfff0068)
+#define PCIMT_CONFIG_ADDRESS	CKSEG1ADDR(0xbfff0070)
+#define PCIMT_ASIC_ID		CKSEG1ADDR(0xbfff0078)	/* read */
+#define PCIMT_SOFT_RESET	CKSEG1ADDR(0xbfff0078)	/* write */
+#define PCIMT_PIA_OE		CKSEG1ADDR(0xbfff0080)
+#define PCIMT_PIA_DATAOUT	CKSEG1ADDR(0xbfff0088)
+#define PCIMT_PIA_DATAIN	CKSEG1ADDR(0xbfff0090)
+#define PCIMT_CACHECONF		CKSEG1ADDR(0xbfff0098)
+#define PCIMT_INVSPACE		CKSEG1ADDR(0xbfff00a0)
+#endif
+
+#define PCIMT_PCI_CONF		CKSEG1ADDR(0xbfff0100)
+
+/*
+ * Data port for the PCI bus in IO space
+ */
+#define PCIMT_CONFIG_DATA	0x0cfc
+
+/*
+ * Board specific registers
+ */
+#define PCIMT_CSMSR		CKSEG1ADDR(0xbfd00000)
+#define PCIMT_CSSWITCH		CKSEG1ADDR(0xbfd10000)
+#define PCIMT_CSITPEND		CKSEG1ADDR(0xbfd20000)
+#define PCIMT_AUTO_PO_EN	CKSEG1ADDR(0xbfd30000)
+#define PCIMT_CLR_TEMP		CKSEG1ADDR(0xbfd40000)
+#define PCIMT_AUTO_PO_DIS	CKSEG1ADDR(0xbfd50000)
+#define PCIMT_EXMSR		CKSEG1ADDR(0xbfd60000)
+#define PCIMT_UNUSED1		CKSEG1ADDR(0xbfd70000)
+#define PCIMT_CSWCSM		CKSEG1ADDR(0xbfd80000)
+#define PCIMT_UNUSED2		CKSEG1ADDR(0xbfd90000)
+#define PCIMT_CSLED		CKSEG1ADDR(0xbfda0000)
+#define PCIMT_CSMAPISA		CKSEG1ADDR(0xbfdb0000)
+#define PCIMT_CSRSTBP		CKSEG1ADDR(0xbfdc0000)
+#define PCIMT_CLRPOFF		CKSEG1ADDR(0xbfdd0000)
+#define PCIMT_CSTIMER		CKSEG1ADDR(0xbfde0000)
+#define PCIMT_PWDN		CKSEG1ADDR(0xbfdf0000)
+
+/*
+ * A20R based boards
+ */
+#define A20R_PT_CLOCK_BASE      CKSEG1ADDR(0xbc040000)
+#define A20R_PT_TIM0_ACK        CKSEG1ADDR(0xbc050000)
+#define A20R_PT_TIM1_ACK        CKSEG1ADDR(0xbc060000)
+
+#define SNI_A20R_IRQ_BASE       MIPS_CPU_IRQ_BASE
+#define SNI_A20R_IRQ_TIMER      (SNI_A20R_IRQ_BASE+5)
+
+#define SNI_PCIT_INT_REG        CKSEG1ADDR(0xbfff000c)
+
+#define SNI_PCIT_INT_START      24
+#define SNI_PCIT_INT_END        30
+
+#define PCIT_IRQ_ETHERNET       (MIPS_CPU_IRQ_BASE + 5)
+#define PCIT_IRQ_INTA           (SNI_PCIT_INT_START + 0)
+#define PCIT_IRQ_INTB           (SNI_PCIT_INT_START + 1)
+#define PCIT_IRQ_INTC           (SNI_PCIT_INT_START + 2)
+#define PCIT_IRQ_INTD           (SNI_PCIT_INT_START + 3)
+#define PCIT_IRQ_SCSI0          (SNI_PCIT_INT_START + 4)
+#define PCIT_IRQ_SCSI1          (SNI_PCIT_INT_START + 5)
+
+
+/*
+ * Interrupt 0-16 are EISA interrupts.  Interrupts from 16 on are assigned
+ * to the other interrupts generated by ASIC PCI.
+ *
+ * INT2 is a wired-or of the push button interrupt, high temperature interrupt
+ * ASIC PCI interrupt.
+ */
+#define PCIMT_KEYBOARD_IRQ	 1
+#define PCIMT_IRQ_INT2		24
+#define PCIMT_IRQ_INTD		25
+#define PCIMT_IRQ_INTC		26
+#define PCIMT_IRQ_INTB		27
+#define PCIMT_IRQ_INTA		28
+#define PCIMT_IRQ_EISA		29
+#define PCIMT_IRQ_SCSI		30
+
+#define PCIMT_IRQ_ETHERNET	(MIPS_CPU_IRQ_BASE+6)
+
+#if 0
+#define PCIMT_IRQ_TEMPERATURE	24
+#define PCIMT_IRQ_EISA_NMI	25
+#define PCIMT_IRQ_POWER_OFF	26
+#define PCIMT_IRQ_BUTTON	27
+#endif
+
+/*
+ * Base address for the mapped 16mb EISA bus segment.
+ */
+#define PCIMT_EISA_BASE		CKSEG1ADDR(0xb0000000)
+
+/* PCI EISA Interrupt acknowledge  */
+#define PCIMT_INT_ACKNOWLEDGE	CKSEG1ADDR(0xba000000)
+
+/*
+ *  SNI ID PROM
+ *
+ * SNI_IDPROM_MEMSIZE  Memsize in 16MB quantities
+ * SNI_IDPROM_BRDTYPE  Board Type
+ * SNI_IDPROM_CPUTYPE  CPU Type on RM400
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define __SNI_END 0
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define __SNI_END 3
+#endif
+#define SNI_IDPROM_BASE        CKSEG1ADDR(0x1ff00000)
+#define SNI_IDPROM_MEMSIZE     (SNI_IDPROM_BASE + (0x28 ^ __SNI_END))
+#define SNI_IDPROM_BRDTYPE     (SNI_IDPROM_BASE + (0x29 ^ __SNI_END))
+#define SNI_IDPROM_CPUTYPE     (SNI_IDPROM_BASE + (0x30 ^ __SNI_END))
+
+#define SNI_IDPROM_SIZE	0x1000
+
+/* board specific init functions */
+extern void sni_a20r_init(void);
+extern void sni_pcit_init(void);
+extern void sni_rm200_init(void);
+extern void sni_pcimt_init(void);
+
+/* board specific irq init functions */
+extern void sni_a20r_irq_init(void);
+extern void sni_pcit_irq_init(void);
+extern void sni_pcit_cplus_irq_init(void);
+extern void sni_rm200_irq_init(void);
+extern void sni_pcimt_irq_init(void);
+
+/* timer inits */
+extern void sni_cpu_time_init(void);
+
+/* eisa init for RM200/400 */
+#ifdef CONFIG_EISA
+extern int sni_eisa_root_init(void);
+#else
+static inline int sni_eisa_root_init(void)
+{
+	return 0;
+}
+#endif
+
+/* common irq stuff */
+extern void (*sni_hwint)(void);
+extern struct irqaction sni_isa_irq;
+
+#endif /* __ASM_SNI_H */
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
new file mode 100644
index 0000000..facc2d7
--- /dev/null
+++ b/arch/mips/include/asm/socket.h
@@ -0,0 +1,117 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1999, 2000, 2001 Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/*
+ * For setsockopt(2)
+ *
+ * This defines are ABI conformant as far as Linux supports these ...
+ */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001	/* Record debugging information.  */
+#define SO_REUSEADDR	0x0004	/* Allow reuse of local addresses.  */
+#define SO_KEEPALIVE	0x0008	/* Keep connections alive and send
+				   SIGPIPE when they die.  */
+#define SO_DONTROUTE	0x0010	/* Don't do local routing.  */
+#define SO_BROADCAST	0x0020	/* Allow transmission of
+				   broadcast messages.  */
+#define SO_LINGER	0x0080	/* Block on close of a reliable
+				   socket to transmit pending data.  */
+#define SO_OOBINLINE 0x0100	/* Receive out-of-band data in-band.  */
+#if 0
+To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
+#endif
+
+#define SO_TYPE		0x1008	/* Compatible name for SO_STYLE.  */
+#define SO_STYLE	SO_TYPE	/* Synonym */
+#define SO_ERROR	0x1007	/* get error status and clear */
+#define SO_SNDBUF	0x1001	/* Send buffer size. */
+#define SO_RCVBUF	0x1002	/* Receive buffer. */
+#define SO_SNDLOWAT	0x1003	/* send low-water mark */
+#define SO_RCVLOWAT	0x1004	/* receive low-water mark */
+#define SO_SNDTIMEO	0x1005	/* send timeout */
+#define SO_RCVTIMEO 	0x1006	/* receive timeout */
+#define SO_ACCEPTCONN	0x1009
+
+/* linux-specific, might as well be the same as on i386 */
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_BSDCOMPAT	14
+
+#define SO_PASSCRED	17
+#define SO_PEERCRED	18
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE		25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_PEERSEC		30
+#define SO_SNDBUFFORCE		31
+#define SO_RCVBUFFORCE		33
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#ifdef __KERNEL__
+
+/** sock_type - Socket types
+ *
+ * Please notice that for binary compat reasons MIPS has to
+ * override the enum sock_type in include/linux/net.h, so
+ * we define ARCH_HAS_SOCKET_TYPES here.
+ *
+ * @SOCK_DGRAM - datagram (conn.less) socket
+ * @SOCK_STREAM - stream (connection) socket
+ * @SOCK_RAW - raw socket
+ * @SOCK_RDM - reliably-delivered message
+ * @SOCK_SEQPACKET - sequential packet socket
+ * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+ *		  For writing rarp and other similar things on the user level.
+ */
+enum sock_type {
+	SOCK_DGRAM	= 1,
+	SOCK_STREAM	= 2,
+	SOCK_RAW	= 3,
+	SOCK_RDM	= 4,
+	SOCK_SEQPACKET	= 5,
+	SOCK_DCCP	= 6,
+	SOCK_PACKET	= 10,
+};
+
+#define SOCK_MAX (SOCK_PACKET + 1)
+/* Mask which covers at least up to SOCK_MASK-1.  The
+ *  * remaining bits are used as flags. */
+#define SOCK_TYPE_MASK 0xf
+
+/* Flags for socket, socketpair, paccept */
+#define SOCK_CLOEXEC	O_CLOEXEC
+#define SOCK_NONBLOCK	O_NONBLOCK
+
+#define ARCH_HAS_SOCKET_TYPES 1
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/mips/include/asm/sockios.h b/arch/mips/include/asm/sockios.h
new file mode 100644
index 0000000..ed1a5f7
--- /dev/null
+++ b/arch/mips/include/asm/sockios.h
@@ -0,0 +1,26 @@
+/*
+ * Socket-level I/O control calls.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ */
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+
+#include <asm/ioctl.h>
+
+/* Socket-level I/O control calls. */
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS_H */
diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h
new file mode 100644
index 0000000..795ac6c
--- /dev/null
+++ b/arch/mips/include/asm/sparsemem.h
@@ -0,0 +1,14 @@
+#ifndef _MIPS_SPARSEMEM_H
+#define _MIPS_SPARSEMEM_H
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * SECTION_SIZE_BITS		2^N: how big each section will be
+ * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS       28
+#define MAX_PHYSMEM_BITS        35
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _MIPS_SPARSEMEM_H */
+
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
new file mode 100644
index 0000000..1a1f320
--- /dev/null
+++ b/arch/mips/include/asm/spinlock.h
@@ -0,0 +1,487 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#include <linux/compiler.h>
+
+#include <asm/barrier.h>
+#include <asm/war.h>
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ *
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * These are fair FIFO ticket locks
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+
+
+/*
+ * Ticket locks are conceptually two parts, one indicating the current head of
+ * the queue, and the other indicating the current tail. The lock is acquired
+ * by atomically noting the tail and incrementing it by one (thus adding
+ * ourself to the queue and noting our position), then waiting until the head
+ * becomes equal to the the initial value of the tail.
+ */
+
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+	unsigned int counters = ACCESS_ONCE(lock->lock);
+
+	return ((counters >> 14) ^ counters) & 0x1fff;
+}
+
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+#define __raw_spin_unlock_wait(x) \
+	while (__raw_spin_is_locked(x)) { cpu_relax(); }
+
+static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+{
+	unsigned int counters = ACCESS_ONCE(lock->lock);
+
+	return (((counters >> 14) - counters) & 0x1fff) > 1;
+}
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	int my_ticket;
+	int tmp;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__ (
+		"	.set push		# __raw_spin_lock	\n"
+		"	.set noreorder					\n"
+		"							\n"
+		"1:	ll	%[ticket], %[ticket_ptr]		\n"
+		"	addiu	%[my_ticket], %[ticket], 0x4000		\n"
+		"	sc	%[my_ticket], %[ticket_ptr]		\n"
+		"	beqzl	%[my_ticket], 1b			\n"
+		"	 nop						\n"
+		"	srl	%[my_ticket], %[ticket], 14		\n"
+		"	andi	%[my_ticket], %[my_ticket], 0x1fff	\n"
+		"	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"	bne	%[ticket], %[my_ticket], 4f		\n"
+		"	 subu	%[ticket], %[my_ticket], %[ticket]	\n"
+		"2:							\n"
+		"	.subsection 2					\n"
+		"4:	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"5:	sll	%[ticket], 5				\n"
+		"							\n"
+		"6:	bnez	%[ticket], 6b				\n"
+		"	 subu	%[ticket], 1				\n"
+		"							\n"
+		"	lw	%[ticket], %[ticket_ptr]		\n"
+		"	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"	beq	%[ticket], %[my_ticket], 2b		\n"
+		"	 subu	%[ticket], %[my_ticket], %[ticket]	\n"
+		"	b	5b					\n"
+		"	 subu	%[ticket], %[ticket], 1			\n"
+		"	.previous					\n"
+		"	.set pop					\n"
+		: [ticket_ptr] "+m" (lock->lock),
+		  [ticket] "=&r" (tmp),
+		  [my_ticket] "=&r" (my_ticket));
+	} else {
+		__asm__ __volatile__ (
+		"	.set push		# __raw_spin_lock	\n"
+		"	.set noreorder					\n"
+		"							\n"
+		"	ll	%[ticket], %[ticket_ptr]		\n"
+		"1:	addiu	%[my_ticket], %[ticket], 0x4000		\n"
+		"	sc	%[my_ticket], %[ticket_ptr]		\n"
+		"	beqz	%[my_ticket], 3f			\n"
+		"	 nop						\n"
+		"	srl	%[my_ticket], %[ticket], 14		\n"
+		"	andi	%[my_ticket], %[my_ticket], 0x1fff	\n"
+		"	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"	bne	%[ticket], %[my_ticket], 4f		\n"
+		"	 subu	%[ticket], %[my_ticket], %[ticket]	\n"
+		"2:							\n"
+		"	.subsection 2					\n"
+		"3:	b	1b					\n"
+		"	 ll	%[ticket], %[ticket_ptr]		\n"
+		"							\n"
+		"4:	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"5:	sll	%[ticket], 5				\n"
+		"							\n"
+		"6:	bnez	%[ticket], 6b				\n"
+		"	 subu	%[ticket], 1				\n"
+		"							\n"
+		"	lw	%[ticket], %[ticket_ptr]		\n"
+		"	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"	beq	%[ticket], %[my_ticket], 2b		\n"
+		"	 subu	%[ticket], %[my_ticket], %[ticket]	\n"
+		"	b	5b					\n"
+		"	 subu	%[ticket], %[ticket], 1			\n"
+		"	.previous					\n"
+		"	.set pop					\n"
+		: [ticket_ptr] "+m" (lock->lock),
+		  [ticket] "=&r" (tmp),
+		  [my_ticket] "=&r" (my_ticket));
+	}
+
+	smp_llsc_mb();
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	int tmp;
+
+	smp_llsc_mb();
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__ (
+		"				# __raw_spin_unlock	\n"
+		"1:	ll	%[ticket], %[ticket_ptr]		\n"
+		"	addiu	%[ticket], %[ticket], 1			\n"
+		"	ori	%[ticket], %[ticket], 0x2000		\n"
+		"	xori	%[ticket], %[ticket], 0x2000		\n"
+		"	sc	%[ticket], %[ticket_ptr]		\n"
+		"	beqzl	%[ticket], 1b				\n"
+		: [ticket_ptr] "+m" (lock->lock),
+		  [ticket] "=&r" (tmp));
+	} else {
+		__asm__ __volatile__ (
+		"	.set push		# __raw_spin_unlock	\n"
+		"	.set noreorder					\n"
+		"							\n"
+		"	ll	%[ticket], %[ticket_ptr]		\n"
+		"1:	addiu	%[ticket], %[ticket], 1			\n"
+		"	ori	%[ticket], %[ticket], 0x2000		\n"
+		"	xori	%[ticket], %[ticket], 0x2000		\n"
+		"	sc	%[ticket], %[ticket_ptr]		\n"
+		"	beqz	%[ticket], 2f				\n"
+		"	 nop						\n"
+		"							\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 ll	%[ticket], %[ticket_ptr]		\n"
+		"	.previous					\n"
+		"	.set pop					\n"
+		: [ticket_ptr] "+m" (lock->lock),
+		  [ticket] "=&r" (tmp));
+	}
+}
+
+static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	int tmp, tmp2, tmp3;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__ (
+		"	.set push		# __raw_spin_trylock	\n"
+		"	.set noreorder					\n"
+		"							\n"
+		"1:	ll	%[ticket], %[ticket_ptr]		\n"
+		"	srl	%[my_ticket], %[ticket], 14		\n"
+		"	andi	%[my_ticket], %[my_ticket], 0x1fff	\n"
+		"	andi	%[now_serving], %[ticket], 0x1fff	\n"
+		"	bne	%[my_ticket], %[now_serving], 3f	\n"
+		"	 addiu	%[ticket], %[ticket], 0x4000		\n"
+		"	sc	%[ticket], %[ticket_ptr]		\n"
+		"	beqzl	%[ticket], 1b				\n"
+		"	 li	%[ticket], 1				\n"
+		"2:							\n"
+		"	.subsection 2					\n"
+		"3:	b	2b					\n"
+		"	 li	%[ticket], 0				\n"
+		"	.previous					\n"
+		"	.set pop					\n"
+		: [ticket_ptr] "+m" (lock->lock),
+		  [ticket] "=&r" (tmp),
+		  [my_ticket] "=&r" (tmp2),
+		  [now_serving] "=&r" (tmp3));
+	} else {
+		__asm__ __volatile__ (
+		"	.set push		# __raw_spin_trylock	\n"
+		"	.set noreorder					\n"
+		"							\n"
+		"	ll	%[ticket], %[ticket_ptr]		\n"
+		"1:	srl	%[my_ticket], %[ticket], 14		\n"
+		"	andi	%[my_ticket], %[my_ticket], 0x1fff	\n"
+		"	andi	%[now_serving], %[ticket], 0x1fff	\n"
+		"	bne	%[my_ticket], %[now_serving], 3f	\n"
+		"	 addiu	%[ticket], %[ticket], 0x4000		\n"
+		"	sc	%[ticket], %[ticket_ptr]		\n"
+		"	beqz	%[ticket], 4f				\n"
+		"	 li	%[ticket], 1				\n"
+		"2:							\n"
+		"	.subsection 2					\n"
+		"3:	b	2b					\n"
+		"	 li	%[ticket], 0				\n"
+		"4:	b	1b					\n"
+		"	 ll	%[ticket], %[ticket_ptr]		\n"
+		"	.previous					\n"
+		"	.set pop					\n"
+		: [ticket_ptr] "+m" (lock->lock),
+		  [ticket] "=&r" (tmp),
+		  [my_ticket] "=&r" (tmp2),
+		  [now_serving] "=&r" (tmp3));
+	}
+
+	smp_llsc_mb();
+
+	return tmp;
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts but no interrupt
+ * writers. For those circumstances we can "mix" irq-safe locks - any writer
+ * needs to get a irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/*
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(rw)	((rw)->lock >= 0)
+
+/*
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(rw)	(!(rw)->lock)
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_read_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bltz	%1, 1b					\n"
+		"	 addu	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_read_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bltz	%1, 2f					\n"
+		"	 addu	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 1b					\n"
+		"	 nop						\n"
+		"	.subsection 2					\n"
+		"2:	ll	%1, %2					\n"
+		"	bltz	%1, 2b					\n"
+		"	 addu	%1, 1					\n"
+		"	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	}
+
+	smp_llsc_mb();
+}
+
+/* Note the use of sub, not subu which will make the kernel die with an
+   overflow exception if we ever try to unlock an rwlock that is already
+   unlocked or is being held by a writer.  */
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	smp_llsc_mb();
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"1:	ll	%1, %2		# __raw_read_unlock	\n"
+		"	sub	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_read_unlock	\n"
+		"1:	ll	%1, %2					\n"
+		"	sub	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 2f					\n"
+		"	 nop						\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	}
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_write_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bnez	%1, 1b					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_write_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bnez	%1, 2f					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 2f					\n"
+		"	 nop						\n"
+		"	.subsection 2					\n"
+		"2:	ll	%1, %2					\n"
+		"	bnez	%1, 2b					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	}
+
+	smp_llsc_mb();
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	smp_mb();
+
+	__asm__ __volatile__(
+	"				# __raw_write_unlock	\n"
+	"	sw	$0, %0					\n"
+	: "=m" (rw->lock)
+	: "m" (rw->lock)
+	: "memory");
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	unsigned int tmp;
+	int ret;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_read_trylock	\n"
+		"	li	%2, 0					\n"
+		"1:	ll	%1, %3					\n"
+		"	bltz	%1, 2f					\n"
+		"	 addu	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	.set	reorder					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		__WEAK_LLSC_MB
+		"	li	%2, 1					\n"
+		"2:							\n"
+		: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_read_trylock	\n"
+		"	li	%2, 0					\n"
+		"1:	ll	%1, %3					\n"
+		"	bltz	%1, 2f					\n"
+		"	 addu	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 1b					\n"
+		"	 nop						\n"
+		"	.set	reorder					\n"
+		__WEAK_LLSC_MB
+		"	li	%2, 1					\n"
+		"2:							\n"
+		: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+		: "m" (rw->lock)
+		: "memory");
+	}
+
+	return ret;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	unsigned int tmp;
+	int ret;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_write_trylock	\n"
+		"	li	%2, 0					\n"
+		"1:	ll	%1, %3					\n"
+		"	bnez	%1, 2f					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		__WEAK_LLSC_MB
+		"	li	%2, 1					\n"
+		"	.set	reorder					\n"
+		"2:							\n"
+		: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_write_trylock	\n"
+		"	li	%2, 0					\n"
+		"1:	ll	%1, %3					\n"
+		"	bnez	%1, 2f					\n"
+		"	lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 3f					\n"
+		"	 li	%2, 1					\n"
+		"2:							\n"
+		__WEAK_LLSC_MB
+		"	.subsection 2					\n"
+		"3:	b	1b					\n"
+		"	 li	%2, 0					\n"
+		"	.previous					\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+		: "m" (rw->lock)
+		: "memory");
+	}
+
+	return ret;
+}
+
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h
new file mode 100644
index 0000000..adeedaa1
--- /dev/null
+++ b/arch/mips/include/asm/spinlock_types.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SPINLOCK_TYPES_H
+#define _ASM_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	/*
+	 * bits  0..13: serving_now
+	 * bits 14    : junk data
+	 * bits 15..28: ticket
+	 */
+	unsigned int lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
new file mode 100644
index 0000000..4c37c4e5
--- /dev/null
+++ b/arch/mips/include/asm/stackframe.h
@@ -0,0 +1,574 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle
+ * Copyright (C) 1994, 1995, 1996 Paul M. Antoine.
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#ifndef _ASM_STACKFRAME_H
+#define _ASM_STACKFRAME_H
+
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * For SMTC kernel, global IE should be left set, and interrupts
+ * controlled exclusively via IXMT.
+ */
+#ifdef CONFIG_MIPS_MT_SMTC
+#define STATMASK 0x1e
+#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#define STATMASK 0x3f
+#else
+#define STATMASK 0x1f
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+		.macro	SAVE_AT
+		.set	push
+		.set	noat
+		LONG_S	$1, PT_R1(sp)
+		.set	pop
+		.endm
+
+		.macro	SAVE_TEMP
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+		mflhxu	v1
+		LONG_S	v1, PT_LO(sp)
+		mflhxu	v1
+		LONG_S	v1, PT_HI(sp)
+		mflhxu	v1
+		LONG_S	v1, PT_ACX(sp)
+#else
+		mfhi	v1
+		LONG_S	v1, PT_HI(sp)
+		mflo	v1
+		LONG_S	v1, PT_LO(sp)
+#endif
+#ifdef CONFIG_32BIT
+		LONG_S	$8, PT_R8(sp)
+		LONG_S	$9, PT_R9(sp)
+#endif
+		LONG_S	$10, PT_R10(sp)
+		LONG_S	$11, PT_R11(sp)
+		LONG_S	$12, PT_R12(sp)
+		LONG_S	$13, PT_R13(sp)
+		LONG_S	$14, PT_R14(sp)
+		LONG_S	$15, PT_R15(sp)
+		LONG_S	$24, PT_R24(sp)
+		.endm
+
+		.macro	SAVE_STATIC
+		LONG_S	$16, PT_R16(sp)
+		LONG_S	$17, PT_R17(sp)
+		LONG_S	$18, PT_R18(sp)
+		LONG_S	$19, PT_R19(sp)
+		LONG_S	$20, PT_R20(sp)
+		LONG_S	$21, PT_R21(sp)
+		LONG_S	$22, PT_R22(sp)
+		LONG_S	$23, PT_R23(sp)
+		LONG_S	$30, PT_R30(sp)
+		.endm
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_MIPS_MT_SMTC
+#define PTEBASE_SHIFT	19	/* TCBIND */
+#else
+#define PTEBASE_SHIFT	23	/* CONTEXT */
+#endif
+		.macro	get_saved_sp	/* SMP variation */
+#ifdef CONFIG_MIPS_MT_SMTC
+		mfc0	k0, CP0_TCBIND
+#else
+		MFC0	k0, CP0_CONTEXT
+#endif
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+		lui	k1, %hi(kernelsp)
+#else
+		lui	k1, %highest(kernelsp)
+		daddiu	k1, %higher(kernelsp)
+		dsll	k1, 16
+		daddiu	k1, %hi(kernelsp)
+		dsll	k1, 16
+#endif
+		LONG_SRL	k0, PTEBASE_SHIFT
+		LONG_ADDU	k1, k0
+		LONG_L	k1, %lo(kernelsp)(k1)
+		.endm
+
+		.macro	set_saved_sp stackp temp temp2
+#ifdef CONFIG_MIPS_MT_SMTC
+		mfc0	\temp, CP0_TCBIND
+#else
+		MFC0	\temp, CP0_CONTEXT
+#endif
+		LONG_SRL	\temp, PTEBASE_SHIFT
+		LONG_S	\stackp, kernelsp(\temp)
+		.endm
+#else
+		.macro	get_saved_sp	/* Uniprocessor variation */
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+		lui	k1, %hi(kernelsp)
+#else
+		lui	k1, %highest(kernelsp)
+		daddiu	k1, %higher(kernelsp)
+		dsll	k1, k1, 16
+		daddiu	k1, %hi(kernelsp)
+		dsll	k1, k1, 16
+#endif
+		LONG_L	k1, %lo(kernelsp)(k1)
+		.endm
+
+		.macro	set_saved_sp stackp temp temp2
+		LONG_S	\stackp, kernelsp
+		.endm
+#endif
+
+		.macro	SAVE_SOME
+		.set	push
+		.set	noat
+		.set	reorder
+		mfc0	k0, CP0_STATUS
+		sll	k0, 3		/* extract cu0 bit */
+		.set	noreorder
+		bltz	k0, 8f
+		 move	k1, sp
+		.set	reorder
+		/* Called from user mode, new stack. */
+		get_saved_sp
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+8:		move	k0, sp
+		PTR_SUBU sp, k1, PT_SIZE
+#else
+		.set	at=k0
+8:		PTR_SUBU k1, PT_SIZE
+		.set	noat
+		move	k0, sp
+		move	sp, k1
+#endif
+		LONG_S	k0, PT_R29(sp)
+		LONG_S	$3, PT_R3(sp)
+		/*
+		 * You might think that you don't need to save $0,
+		 * but the FPU emulator and gdb remote debug stub
+		 * need it to operate correctly
+		 */
+		LONG_S	$0, PT_R0(sp)
+		mfc0	v1, CP0_STATUS
+		LONG_S	$2, PT_R2(sp)
+		LONG_S	v1, PT_STATUS(sp)
+#ifdef CONFIG_MIPS_MT_SMTC
+		/*
+		 * Ideally, these instructions would be shuffled in
+		 * to cover the pipeline delay.
+		 */
+		.set	mips32
+		mfc0	v1, CP0_TCSTATUS
+		.set	mips0
+		LONG_S	v1, PT_TCSTATUS(sp)
+#endif /* CONFIG_MIPS_MT_SMTC */
+		LONG_S	$4, PT_R4(sp)
+		mfc0	v1, CP0_CAUSE
+		LONG_S	$5, PT_R5(sp)
+		LONG_S	v1, PT_CAUSE(sp)
+		LONG_S	$6, PT_R6(sp)
+		MFC0	v1, CP0_EPC
+		LONG_S	$7, PT_R7(sp)
+#ifdef CONFIG_64BIT
+		LONG_S	$8, PT_R8(sp)
+		LONG_S	$9, PT_R9(sp)
+#endif
+		LONG_S	v1, PT_EPC(sp)
+		LONG_S	$25, PT_R25(sp)
+		LONG_S	$28, PT_R28(sp)
+		LONG_S	$31, PT_R31(sp)
+		ori	$28, sp, _THREAD_MASK
+		xori	$28, _THREAD_MASK
+		.set	pop
+		.endm
+
+		.macro	SAVE_ALL
+		SAVE_SOME
+		SAVE_AT
+		SAVE_TEMP
+		SAVE_STATIC
+		.endm
+
+		.macro	RESTORE_AT
+		.set	push
+		.set	noat
+		LONG_L	$1,  PT_R1(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_TEMP
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+		LONG_L	$24, PT_ACX(sp)
+		mtlhx	$24
+		LONG_L	$24, PT_HI(sp)
+		mtlhx	$24
+		LONG_L	$24, PT_LO(sp)
+		mtlhx	$24
+#else
+		LONG_L	$24, PT_LO(sp)
+		mtlo	$24
+		LONG_L	$24, PT_HI(sp)
+		mthi	$24
+#endif
+#ifdef CONFIG_32BIT
+		LONG_L	$8, PT_R8(sp)
+		LONG_L	$9, PT_R9(sp)
+#endif
+		LONG_L	$10, PT_R10(sp)
+		LONG_L	$11, PT_R11(sp)
+		LONG_L	$12, PT_R12(sp)
+		LONG_L	$13, PT_R13(sp)
+		LONG_L	$14, PT_R14(sp)
+		LONG_L	$15, PT_R15(sp)
+		LONG_L	$24, PT_R24(sp)
+		.endm
+
+		.macro	RESTORE_STATIC
+		LONG_L	$16, PT_R16(sp)
+		LONG_L	$17, PT_R17(sp)
+		LONG_L	$18, PT_R18(sp)
+		LONG_L	$19, PT_R19(sp)
+		LONG_L	$20, PT_R20(sp)
+		LONG_L	$21, PT_R21(sp)
+		LONG_L	$22, PT_R22(sp)
+		LONG_L	$23, PT_R23(sp)
+		LONG_L	$30, PT_R30(sp)
+		.endm
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+		.macro	RESTORE_SOME
+		.set	push
+		.set	reorder
+		.set	noat
+		mfc0	a0, CP0_STATUS
+		li	v1, 0xff00
+		ori	a0, STATMASK
+		xori	a0, STATMASK
+		mtc0	a0, CP0_STATUS
+		and	a0, v1
+		LONG_L	v0, PT_STATUS(sp)
+		nor	v1, $0, v1
+		and	v0, v1
+		or	v0, a0
+		mtc0	v0, CP0_STATUS
+		LONG_L	$31, PT_R31(sp)
+		LONG_L	$28, PT_R28(sp)
+		LONG_L	$25, PT_R25(sp)
+		LONG_L	$7,  PT_R7(sp)
+		LONG_L	$6,  PT_R6(sp)
+		LONG_L	$5,  PT_R5(sp)
+		LONG_L	$4,  PT_R4(sp)
+		LONG_L	$3,  PT_R3(sp)
+		LONG_L	$2,  PT_R2(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_SP_AND_RET
+		.set	push
+		.set	noreorder
+		LONG_L	k0, PT_EPC(sp)
+		LONG_L	sp, PT_R29(sp)
+		jr	k0
+		 rfe
+		.set	pop
+		.endm
+
+#else
+		.macro	RESTORE_SOME
+		.set	push
+		.set	reorder
+		.set	noat
+#ifdef CONFIG_MIPS_MT_SMTC
+		.set	mips32r2
+		/*
+		 * We need to make sure the read-modify-write
+		 * of Status below isn't perturbed by an interrupt
+		 * or cross-TC access, so we need to do at least a DMT,
+		 * protected by an interrupt-inhibit. But setting IXMT
+		 * also creates a few-cycle window where an IPI could
+		 * be queued and not be detected before potentially
+		 * returning to a WAIT or user-mode loop. It must be
+		 * replayed.
+		 *
+		 * We're in the middle of a context switch, and
+		 * we can't dispatch it directly without trashing
+		 * some registers, so we'll try to detect this unlikely
+		 * case and program a software interrupt in the VPE,
+		 * as would be done for a cross-VPE IPI.  To accomodate
+		 * the handling of that case, we're doing a DVPE instead
+		 * of just a DMT here to protect against other threads.
+		 * This is a lot of cruft to cover a tiny window.
+		 * If you can find a better design, implement it!
+		 *
+		 */
+		mfc0	v0, CP0_TCSTATUS
+		ori	v0, TCSTATUS_IXMT
+		mtc0	v0, CP0_TCSTATUS
+		_ehb
+		DVPE	5				# dvpe a1
+		jal	mips_ihb
+#endif /* CONFIG_MIPS_MT_SMTC */
+		mfc0	a0, CP0_STATUS
+		ori	a0, STATMASK
+		xori	a0, STATMASK
+		mtc0	a0, CP0_STATUS
+		li	v1, 0xff00
+		and	a0, v1
+		LONG_L	v0, PT_STATUS(sp)
+		nor	v1, $0, v1
+		and	v0, v1
+		or	v0, a0
+		mtc0	v0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * Only after EXL/ERL have been restored to status can we
+ * restore TCStatus.IXMT.
+ */
+		LONG_L	v1, PT_TCSTATUS(sp)
+		_ehb
+		mfc0	a0, CP0_TCSTATUS
+		andi	v1, TCSTATUS_IXMT
+		bnez	v1, 0f
+
+/*
+ * We'd like to detect any IPIs queued in the tiny window
+ * above and request an software interrupt to service them
+ * when we ERET.
+ *
+ * Computing the offset into the IPIQ array of the executing
+ * TC's IPI queue in-line would be tedious.  We use part of
+ * the TCContext register to hold 16 bits of offset that we
+ * can add in-line to find the queue head.
+ */
+		mfc0	v0, CP0_TCCONTEXT
+		la	a2, IPIQ
+		srl	v0, v0, 16
+		addu	a2, a2, v0
+		LONG_L	v0, 0(a2)
+		beqz	v0, 0f
+/*
+ * If we have a queue, provoke dispatch within the VPE by setting C_SW1
+ */
+		mfc0	v0, CP0_CAUSE
+		ori	v0, v0, C_SW1
+		mtc0	v0, CP0_CAUSE
+0:
+		/*
+		 * This test should really never branch but
+		 * let's be prudent here.  Having atomized
+		 * the shared register modifications, we can
+		 * now EVPE, and must do so before interrupts
+		 * are potentially re-enabled.
+		 */
+		andi	a1, a1, MVPCONTROL_EVP
+		beqz	a1, 1f
+		evpe
+1:
+		/* We know that TCStatua.IXMT should be set from above */
+		xori	a0, a0, TCSTATUS_IXMT
+		or	a0, a0, v1
+		mtc0	a0, CP0_TCSTATUS
+		_ehb
+
+		.set	mips0
+#endif /* CONFIG_MIPS_MT_SMTC */
+		LONG_L	v1, PT_EPC(sp)
+		MTC0	v1, CP0_EPC
+		LONG_L	$31, PT_R31(sp)
+		LONG_L	$28, PT_R28(sp)
+		LONG_L	$25, PT_R25(sp)
+#ifdef CONFIG_64BIT
+		LONG_L	$8, PT_R8(sp)
+		LONG_L	$9, PT_R9(sp)
+#endif
+		LONG_L	$7,  PT_R7(sp)
+		LONG_L	$6,  PT_R6(sp)
+		LONG_L	$5,  PT_R5(sp)
+		LONG_L	$4,  PT_R4(sp)
+		LONG_L	$3,  PT_R3(sp)
+		LONG_L	$2,  PT_R2(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_SP_AND_RET
+		LONG_L	sp, PT_R29(sp)
+		.set	mips3
+		eret
+		.set	mips0
+		.endm
+
+#endif
+
+		.macro	RESTORE_SP
+		LONG_L	sp, PT_R29(sp)
+		.endm
+
+		.macro	RESTORE_ALL
+		RESTORE_TEMP
+		RESTORE_STATIC
+		RESTORE_AT
+		RESTORE_SOME
+		RESTORE_SP
+		.endm
+
+		.macro	RESTORE_ALL_AND_RET
+		RESTORE_TEMP
+		RESTORE_STATIC
+		RESTORE_AT
+		RESTORE_SOME
+		RESTORE_SP_AND_RET
+		.endm
+
+/*
+ * Move to kernel mode and disable interrupts.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	CLI
+#if !defined(CONFIG_MIPS_MT_SMTC)
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | STATMASK
+		or	t0, t1
+		xori	t0, STATMASK
+		mtc0	t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+		/*
+		 * For SMTC, we need to set privilege
+		 * and disable interrupts only for the
+		 * current TC, using the TCStatus register.
+		 */
+		mfc0	t0, CP0_TCSTATUS
+		/* Fortunately CU 0 is in the same place in both registers */
+		/* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
+		li	t1, ST0_CU0 | 0x08001c00
+		or	t0, t1
+		/* Clear TKSU, leave IXMT */
+		xori	t0, 0x00001800
+		mtc0	t0, CP0_TCSTATUS
+		_ehb
+		/* We need to leave the global IE bit set, but clear EXL...*/
+		mfc0	t0, CP0_STATUS
+		ori	t0, ST0_EXL | ST0_ERL
+		xori	t0, ST0_EXL | ST0_ERL
+		mtc0	t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
+		irq_disable_hazard
+		.endm
+
+/*
+ * Move to kernel mode and enable interrupts.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	STI
+#if !defined(CONFIG_MIPS_MT_SMTC)
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | STATMASK
+		or	t0, t1
+		xori	t0, STATMASK & ~1
+		mtc0	t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+		/*
+		 * For SMTC, we need to set privilege
+		 * and enable interrupts only for the
+		 * current TC, using the TCStatus register.
+		 */
+		_ehb
+		mfc0	t0, CP0_TCSTATUS
+		/* Fortunately CU 0 is in the same place in both registers */
+		/* Set TCU0, TKSU (for later inversion) and IXMT */
+		li	t1, ST0_CU0 | 0x08001c00
+		or	t0, t1
+		/* Clear TKSU *and* IXMT */
+		xori	t0, 0x00001c00
+		mtc0	t0, CP0_TCSTATUS
+		_ehb
+		/* We need to leave the global IE bit set, but clear EXL...*/
+		mfc0	t0, CP0_STATUS
+		ori	t0, ST0_EXL
+		xori	t0, ST0_EXL
+		mtc0	t0, CP0_STATUS
+		/* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
+#endif /* CONFIG_MIPS_MT_SMTC */
+		irq_enable_hazard
+		.endm
+
+/*
+ * Just move to kernel mode and leave interrupts as they are.  Note
+ * for the R3000 this means copying the previous enable from IEp.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	KMODE
+#ifdef CONFIG_MIPS_MT_SMTC
+		/*
+		 * This gets baroque in SMTC.  We want to
+		 * protect the non-atomic clearing of EXL
+		 * with DMT/EMT, but we don't want to take
+		 * an interrupt while DMT is still in effect.
+		 */
+
+		/* KMODE gets invoked from both reorder and noreorder code */
+		.set	push
+		.set	mips32r2
+		.set	noreorder
+		mfc0	v0, CP0_TCSTATUS
+		andi	v1, v0, TCSTATUS_IXMT
+		ori	v0, TCSTATUS_IXMT
+		mtc0	v0, CP0_TCSTATUS
+		_ehb
+		DMT	2				# dmt	v0
+		/*
+		 * We don't know a priori if ra is "live"
+		 */
+		move	t0, ra
+		jal	mips_ihb
+		nop	/* delay slot */
+		move	ra, t0
+#endif /* CONFIG_MIPS_MT_SMTC */
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | (STATMASK & ~1)
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+		andi	t2, t0, ST0_IEP
+		srl	t2, 2
+		or	t0, t2
+#endif
+		or	t0, t1
+		xori	t0, STATMASK & ~1
+		mtc0	t0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+		_ehb
+		andi	v0, v0, VPECONTROL_TE
+		beqz	v0, 2f
+		nop	/* delay slot */
+		emt
+2:
+		mfc0	v0, CP0_TCSTATUS
+		/* Clear IXMT, then OR in previous value */
+		ori	v0, TCSTATUS_IXMT
+		xori	v0, TCSTATUS_IXMT
+		or	v0, v1, v0
+		mtc0	v0, CP0_TCSTATUS
+		/*
+		 * irq_disable_hazard below should expand to EHB
+		 * on 24K/34K CPUS
+		 */
+		.set pop
+#endif /* CONFIG_MIPS_MT_SMTC */
+		irq_disable_hazard
+		.endm
+
+#endif /* _ASM_STACKFRAME_H */
diff --git a/arch/mips/include/asm/stacktrace.h b/arch/mips/include/asm/stacktrace.h
new file mode 100644
index 0000000..0bf8281
--- /dev/null
+++ b/arch/mips/include/asm/stacktrace.h
@@ -0,0 +1,48 @@
+#ifndef _ASM_STACKTRACE_H
+#define _ASM_STACKTRACE_H
+
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_KALLSYMS
+extern int raw_show_trace;
+extern unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
+				  unsigned long pc, unsigned long *ra);
+#else
+#define raw_show_trace 1
+static inline unsigned long unwind_stack(struct task_struct *task,
+	unsigned long *sp, unsigned long pc, unsigned long *ra)
+{
+	return 0;
+}
+#endif
+
+static __always_inline void prepare_frametrace(struct pt_regs *regs)
+{
+#ifndef CONFIG_KALLSYMS
+	/*
+	 * Remove any garbage that may be in regs (specially func
+	 * addresses) to avoid show_raw_backtrace() to report them
+	 */
+	memset(regs, 0, sizeof(*regs));
+#endif
+	__asm__ __volatile__(
+		".set push\n\t"
+		".set noat\n\t"
+#ifdef CONFIG_64BIT
+		"1: dla $1, 1b\n\t"
+		"sd $1, %0\n\t"
+		"sd $29, %1\n\t"
+		"sd $31, %2\n\t"
+#else
+		"1: la $1, 1b\n\t"
+		"sw $1, %0\n\t"
+		"sw $29, %1\n\t"
+		"sw $31, %2\n\t"
+#endif
+		".set pop\n\t"
+		: "=m" (regs->cp0_epc),
+		"=m" (regs->regs[29]), "=m" (regs->regs[31])
+		: : "memory");
+}
+
+#endif /* _ASM_STACKTRACE_H */
diff --git a/arch/mips/include/asm/stat.h b/arch/mips/include/asm/stat.h
new file mode 100644
index 0000000..6e00f75
--- /dev/null
+++ b/arch/mips/include/asm/stat.h
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+#include <linux/types.h>
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
+
+struct stat {
+	unsigned	st_dev;
+	long		st_pad1[3];		/* Reserved for network id */
+	ino_t		st_ino;
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+	uid_t		st_uid;
+	gid_t		st_gid;
+	unsigned 	st_rdev;
+	long		st_pad2[2];
+	off_t		st_size;
+	long		st_pad3;
+	/*
+	 * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+	 * but we don't have it under Linux.
+	 */
+	time_t		st_atime;
+	long		st_atime_nsec;
+	time_t		st_mtime;
+	long		st_mtime_nsec;
+	time_t		st_ctime;
+	long		st_ctime_nsec;
+	long		st_blksize;
+	long		st_blocks;
+	long		st_pad4[14];
+};
+
+/*
+ * This matches struct stat64 in glibc2.1, hence the absolutely insane
+ * amounts of padding around dev_t's.  The memory layout is the same as of
+ * struct stat of the 64-bit kernel.
+ */
+
+struct stat64 {
+	unsigned long	st_dev;
+	unsigned long	st_pad0[3];	/* Reserved for st_dev expansion  */
+
+	unsigned long long	st_ino;
+
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+
+	uid_t		st_uid;
+	gid_t		st_gid;
+
+	unsigned long	st_rdev;
+	unsigned long	st_pad1[3];	/* Reserved for st_rdev expansion  */
+
+	long long	st_size;
+
+	/*
+	 * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+	 * but we don't have it under Linux.
+	 */
+	time_t		st_atime;
+	unsigned long	st_atime_nsec;	/* Reserved for st_atime expansion  */
+
+	time_t		st_mtime;
+	unsigned long	st_mtime_nsec;	/* Reserved for st_mtime expansion  */
+
+	time_t		st_ctime;
+	unsigned long	st_ctime_nsec;	/* Reserved for st_ctime expansion  */
+
+	unsigned long	st_blksize;
+	unsigned long	st_pad2;
+
+	long long	st_blocks;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+/* The memory layout is the same as of struct stat64 of the 32-bit kernel.  */
+struct stat {
+	unsigned int		st_dev;
+	unsigned int		st_pad0[3]; /* Reserved for st_dev expansion */
+
+	unsigned long		st_ino;
+
+	mode_t			st_mode;
+	nlink_t			st_nlink;
+
+	uid_t			st_uid;
+	gid_t			st_gid;
+
+	unsigned int		st_rdev;
+	unsigned int		st_pad1[3]; /* Reserved for st_rdev expansion */
+
+	off_t			st_size;
+
+	/*
+	 * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+	 * but we don't have it under Linux.
+	 */
+	unsigned int		st_atime;
+	unsigned int		st_atime_nsec;
+
+	unsigned int		st_mtime;
+	unsigned int		st_mtime_nsec;
+
+	unsigned int		st_ctime;
+	unsigned int		st_ctime_nsec;
+
+	unsigned int		st_blksize;
+	unsigned int		st_pad2;
+
+	unsigned long		st_blocks;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#define STAT_HAVE_NSEC 1
+
+#endif /* _ASM_STAT_H */
diff --git a/arch/mips/include/asm/statfs.h b/arch/mips/include/asm/statfs.h
new file mode 100644
index 0000000..c3ddf97
--- /dev/null
+++ b/arch/mips/include/asm/statfs.h
@@ -0,0 +1,96 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_STATFS_H
+#define _ASM_STATFS_H
+
+#include <linux/posix_types.h>
+#include <asm/sgidefs.h>
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t        fsid_t;
+
+#endif
+
+struct statfs {
+	long		f_type;
+#define f_fstyp f_type
+	long		f_bsize;
+	long		f_frsize;	/* Fragment size - unsupported */
+	long		f_blocks;
+	long		f_bfree;
+	long		f_files;
+	long		f_ffree;
+	long		f_bavail;
+
+	/* Linux specials */
+	__kernel_fsid_t	f_fsid;
+	long		f_namelen;
+	long		f_spare[6];
+};
+
+#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
+
+/*
+ * Unlike the traditional version the LFAPI version has none of the ABI junk
+ */
+struct statfs64 {
+	__u32	f_type;
+	__u32	f_bsize;
+	__u32	f_frsize;	/* Fragment size - unsupported */
+	__u32	__pad;
+	__u64	f_blocks;
+	__u64	f_bfree;
+	__u64	f_files;
+	__u64	f_ffree;
+	__u64	f_bavail;
+	__kernel_fsid_t f_fsid;
+	__u32	f_namelen;
+	__u32	f_spare[6];
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+struct statfs64 {			/* Same as struct statfs */
+	long		f_type;
+	long		f_bsize;
+	long		f_frsize;	/* Fragment size - unsupported */
+	long		f_blocks;
+	long		f_bfree;
+	long		f_files;
+	long		f_ffree;
+	long		f_bavail;
+
+	/* Linux specials */
+	__kernel_fsid_t	f_fsid;
+	long		f_namelen;
+	long		f_spare[6];
+};
+
+struct compat_statfs64 {
+	__u32	f_type;
+	__u32	f_bsize;
+	__u32	f_frsize;	/* Fragment size - unsupported */
+	__u32	__pad;
+	__u64	f_blocks;
+	__u64	f_bfree;
+	__u64	f_files;
+	__u64	f_ffree;
+	__u64	f_bavail;
+	__kernel_fsid_t f_fsid;
+	__u32	f_namelen;
+	__u32	f_spare[6];
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#endif /* _ASM_STATFS_H */
diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h
new file mode 100644
index 0000000..436e3ad
--- /dev/null
+++ b/arch/mips/include/asm/string.h
@@ -0,0 +1,143 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994, 95, 96, 97, 98, 2000, 01 Ralf Baechle
+ * Copyright (c) 2000 by Silicon Graphics, Inc.
+ * Copyright (c) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+
+
+/*
+ * Most of the inline functions are rather naive implementations so I just
+ * didn't bother updating them for 64-bit ...
+ */
+#ifdef CONFIG_32BIT
+
+#ifndef IN_STRING_C
+
+#define __HAVE_ARCH_STRCPY
+static __inline__ char *strcpy(char *__dest, __const__ char *__src)
+{
+  char *__xdest = __dest;
+
+  __asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n"
+	"1:\tlbu\t$1,(%1)\n\t"
+	"addiu\t%1,1\n\t"
+	"sb\t$1,(%0)\n\t"
+	"bnez\t$1,1b\n\t"
+	"addiu\t%0,1\n\t"
+	".set\tat\n\t"
+	".set\treorder"
+	: "=r" (__dest), "=r" (__src)
+        : "0" (__dest), "1" (__src)
+	: "memory");
+
+  return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n)
+{
+  char *__xdest = __dest;
+
+  if (__n == 0)
+    return __xdest;
+
+  __asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n"
+	"1:\tlbu\t$1,(%1)\n\t"
+	"subu\t%2,1\n\t"
+	"sb\t$1,(%0)\n\t"
+	"beqz\t$1,2f\n\t"
+	"addiu\t%0,1\n\t"
+	"bnez\t%2,1b\n\t"
+	"addiu\t%1,1\n"
+	"2:\n\t"
+	".set\tat\n\t"
+	".set\treorder"
+        : "=r" (__dest), "=r" (__src), "=r" (__n)
+        : "0" (__dest), "1" (__src), "2" (__n)
+        : "memory");
+
+  return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct)
+{
+  int __res;
+
+  __asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n\t"
+	"lbu\t%2,(%0)\n"
+	"1:\tlbu\t$1,(%1)\n\t"
+	"addiu\t%0,1\n\t"
+	"bne\t$1,%2,2f\n\t"
+	"addiu\t%1,1\n\t"
+	"bnez\t%2,1b\n\t"
+	"lbu\t%2,(%0)\n\t"
+#if defined(CONFIG_CPU_R3000)
+	"nop\n\t"
+#endif
+	"move\t%2,$1\n"
+	"2:\tsubu\t%2,$1\n"
+	"3:\t.set\tat\n\t"
+	".set\treorder"
+	: "=r" (__cs), "=r" (__ct), "=r" (__res)
+	: "0" (__cs), "1" (__ct));
+
+  return __res;
+}
+
+#endif /* !defined(IN_STRING_C) */
+
+#define __HAVE_ARCH_STRNCMP
+static __inline__ int
+strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count)
+{
+	int __res;
+
+	__asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n"
+	"1:\tlbu\t%3,(%0)\n\t"
+	"beqz\t%2,2f\n\t"
+	"lbu\t$1,(%1)\n\t"
+	"subu\t%2,1\n\t"
+	"bne\t$1,%3,3f\n\t"
+	"addiu\t%0,1\n\t"
+	"bnez\t%3,1b\n\t"
+	"addiu\t%1,1\n"
+	"2:\n\t"
+#if defined(CONFIG_CPU_R3000)
+	"nop\n\t"
+#endif
+	"move\t%3,$1\n"
+	"3:\tsubu\t%3,$1\n\t"
+	".set\tat\n\t"
+	".set\treorder"
+	: "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res)
+	: "0" (__cs), "1" (__ct), "2" (__count));
+
+	return __res;
+}
+#endif /* CONFIG_32BIT */
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#endif /* _ASM_STRING_H */
diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h
new file mode 100644
index 0000000..2562f8f
--- /dev/null
+++ b/arch/mips/include/asm/suspend.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SUSPEND_H
+#define __ASM_SUSPEND_H
+
+/* Somewhen...  Maybe :-)  */
+
+#endif /* __ASM_SUSPEND_H */
diff --git a/arch/mips/include/asm/sysmips.h b/arch/mips/include/asm/sysmips.h
new file mode 100644
index 0000000..4f47b7d
--- /dev/null
+++ b/arch/mips/include/asm/sysmips.h
@@ -0,0 +1,25 @@
+/*
+ * Definitions for the MIPS sysmips(2) call
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ */
+#ifndef _ASM_SYSMIPS_H
+#define _ASM_SYSMIPS_H
+
+/*
+ * Commands for the sysmips(2) call
+ *
+ * sysmips(2) is deprecated - though some existing software uses it.
+ * We only support the following commands.
+ */
+#define SETNAME                    1	/* set hostname                  */
+#define FLUSH_CACHE		   3	/* writeback and invalidate caches */
+#define MIPS_FIXADE                7	/* control address error fixing  */
+#define MIPS_RDNVRAM              10	/* read NVRAM */
+#define MIPS_ATOMIC_SET		2001	/* atomically set variable       */
+
+#endif /* _ASM_SYSMIPS_H */
diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
new file mode 100644
index 0000000..cd30f83
--- /dev/null
+++ b/arch/mips/include/asm/system.h
@@ -0,0 +1,222 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003, 06 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+#include <asm/addrspace.h>
+#include <asm/barrier.h>
+#include <asm/cmpxchg.h>
+#include <asm/cpu-features.h>
+#include <asm/dsp.h>
+#include <asm/watch.h>
+#include <asm/war.h>
+
+
+/*
+ * switch_to(n) should switch tasks to task nr n, first
+ * checking that n isn't the current task, in which case it does nothing.
+ */
+extern asmlinkage void *resume(void *last, void *next, void *next_ti);
+
+struct task_struct;
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+
+/*
+ * Handle the scheduler resume end of FPU affinity management.  We do this
+ * inline to try to keep the overhead down. If we have been forced to run on
+ * a "CPU" with an FPU because of a previous high level of FP computation,
+ * but did not actually use the FPU during the most recent time-slice (CU1
+ * isn't set), we undo the restriction on cpus_allowed.
+ *
+ * We're not calling set_cpus_allowed() here, because we have no need to
+ * force prompt migration - we're already switching the current CPU to a
+ * different thread.
+ */
+
+#define __mips_mt_fpaff_switch_to(prev)					\
+do {									\
+	struct thread_info *__prev_ti = task_thread_info(prev);		\
+									\
+	if (cpu_has_fpu &&						\
+	    test_ti_thread_flag(__prev_ti, TIF_FPUBOUND) &&		\
+	    (!(KSTK_STATUS(prev) & ST0_CU1))) {				\
+		clear_ti_thread_flag(__prev_ti, TIF_FPUBOUND);		\
+		prev->cpus_allowed = prev->thread.user_cpus_allowed;	\
+	}								\
+	next->thread.emulated_fp = 0;					\
+} while(0)
+
+#else
+#define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0)
+#endif
+
+#define switch_to(prev, next, last)					\
+do {									\
+	__mips_mt_fpaff_switch_to(prev);				\
+	if (cpu_has_dsp)						\
+		__save_dsp(prev);					\
+	(last) = resume(prev, next, task_thread_info(next));		\
+} while (0)
+
+#define finish_arch_switch(prev)					\
+do {									\
+	if (cpu_has_dsp)						\
+		__restore_dsp(current);					\
+	if (cpu_has_userlocal)						\
+		write_c0_userlocal(current_thread_info()->tp_value);	\
+	__restore_watch();						\
+} while (0)
+
+static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
+{
+	__u32 retval;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %3			# xchg_u32	\n"
+		"	.set	mips0					\n"
+		"	move	%2, %z4					\n"
+		"	.set	mips3					\n"
+		"	sc	%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %3			# xchg_u32	\n"
+		"	.set	mips0					\n"
+		"	move	%2, %z4					\n"
+		"	.set	mips3					\n"
+		"	sc	%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		retval = *m;
+		*m = val;
+		raw_local_irq_restore(flags);	/* implies memory barrier  */
+	}
+
+	smp_llsc_mb();
+
+	return retval;
+}
+
+#ifdef CONFIG_64BIT
+static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
+{
+	__u64 retval;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %3			# xchg_u64	\n"
+		"	move	%2, %z4					\n"
+		"	scd	%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %3			# xchg_u64	\n"
+		"	move	%2, %z4					\n"
+		"	scd	%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		retval = *m;
+		*m = val;
+		raw_local_irq_restore(flags);	/* implies memory barrier  */
+	}
+
+	smp_llsc_mb();
+
+	return retval;
+}
+#else
+extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 val);
+#define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
+#endif
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32(ptr, x);
+	case 8:
+		return __xchg_u64(ptr, x);
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+extern void set_handler(unsigned long offset, void *addr, unsigned long len);
+extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
+
+typedef void (*vi_handler_t)(void);
+extern void *set_vi_handler(int n, vi_handler_t addr);
+
+extern void *set_except_vector(int n, void *addr);
+extern unsigned long ebase;
+extern void per_cpu_trap_init(void);
+
+/*
+ * See include/asm-ia64/system.h; prevents deadlock on SMP
+ * systems.
+ */
+#define __ARCH_WANT_UNLOCKED_CTXSW
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+#endif /* _ASM_SYSTEM_H */
diff --git a/arch/mips/include/asm/termbits.h b/arch/mips/include/asm/termbits.h
new file mode 100644
index 0000000..c83c684
--- /dev/null
+++ b/arch/mips/include/asm/termbits.h
@@ -0,0 +1,226 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 99, 2001, 06 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+/*
+ * The ABI says nothing about NCC but seems to use NCCS as
+ * replacement for it in struct termio
+ */
+#define NCCS	23
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR		 0		/* Interrupt character [ISIG].  */
+#define VQUIT		 1		/* Quit character [ISIG].  */
+#define VERASE		 2		/* Erase character [ICANON].  */
+#define VKILL		 3		/* Kill-line character [ICANON].  */
+#define VMIN		 4		/* Minimum number of bytes read at once [!ICANON].  */
+#define VTIME		 5		/* Time-out value (tenths of a second) [!ICANON].  */
+#define VEOL2		 6		/* Second EOL character [ICANON].  */
+#define VSWTC		 7		/* ??? */
+#define VSWTCH		VSWTC
+#define VSTART		 8		/* Start (X-ON) character [IXON, IXOFF].  */
+#define VSTOP		 9		/* Stop (X-OFF) character [IXON, IXOFF].  */
+#define VSUSP		10		/* Suspend character [ISIG].  */
+#if 0
+/*
+ * VDSUSP is not supported
+ */
+#define VDSUSP		11		/* Delayed suspend character [ISIG].  */
+#endif
+#define VREPRINT	12		/* Reprint-line character [ICANON].  */
+#define VDISCARD	13		/* Discard character [IEXTEN].  */
+#define VWERASE		14		/* Word-erase character [ICANON].  */
+#define VLNEXT		15		/* Literal-next character [IEXTEN].  */
+#define VEOF		16		/* End-of-file character [ICANON].  */
+#define VEOL		17		/* End-of-line character [ICANON].  */
+
+/* c_iflag bits */
+#define IGNBRK	0000001		/* Ignore break condition.  */
+#define BRKINT	0000002		/* Signal interrupt on break.  */
+#define IGNPAR	0000004		/* Ignore characters with parity errors.  */
+#define PARMRK	0000010		/* Mark parity and framing errors.  */
+#define INPCK	0000020		/* Enable input parity check.  */
+#define ISTRIP	0000040		/* Strip 8th bit off characters.  */
+#define INLCR	0000100		/* Map NL to CR on input.  */
+#define IGNCR	0000200		/* Ignore CR.  */
+#define ICRNL	0000400		/* Map CR to NL on input.  */
+#define IUCLC	0001000		/* Map upper case to lower case on input.  */
+#define IXON	0002000		/* Enable start/stop output control.  */
+#define IXANY	0004000		/* Any character will restart after stop.  */
+#define IXOFF	0010000		/* Enable start/stop input control.  */
+#define IMAXBEL	0020000		/* Ring bell when input queue is full.  */
+#define IUTF8	0040000		/* Input is UTF-8 */
+
+/* c_oflag bits */
+#define OPOST	0000001		/* Perform output processing.  */
+#define OLCUC	0000002		/* Map lower case to upper case on output.  */
+#define ONLCR	0000004		/* Map NL to CR-NL on output.  */
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+/*
+#define PAGEOUT ???
+#define WRAP    ???
+ */
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060		/* Number of bits per byte (mask).  */
+#define   CS5	0000000		/* 5 bits per byte.  */
+#define   CS6	0000020		/* 6 bits per byte.  */
+#define   CS7	0000040		/* 7 bits per byte.  */
+#define   CS8	0000060		/* 8 bits per byte.  */
+#define CSTOPB	0000100		/* Two stop bits instead of one.  */
+#define CREAD	0000200		/* Enable receiver.  */
+#define PARENB	0000400		/* Parity enable.  */
+#define PARODD	0001000		/* Odd parity instead of even.  */
+#define HUPCL	0002000		/* Hang up on last close.  */
+#define CLOCAL	0004000		/* Ignore modem status lines.  */
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate */
+#define CMSPAR    010000000000	/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000	/* flow control */
+
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001		/* Enable signals.  */
+#define ICANON	0000002		/* Do erase and kill processing.  */
+#define XCASE	0000004
+#define ECHO	0000010		/* Enable echo.  */
+#define ECHOE	0000020		/* Visual erase for ERASE.  */
+#define ECHOK	0000040		/* Echo NL after KILL.  */
+#define ECHONL	0000100		/* Echo NL even if ECHO is off.  */
+#define NOFLSH	0000200		/* Disable flush after interrupt.  */
+#define IEXTEN	0000400		/* Enable DISCARD and LNEXT.  */
+#define ECHOCTL	0001000		/* Echo control characters as ^X.  */
+#define ECHOPRT	0002000		/* Hardcopy visual erase.  */
+#define ECHOKE	0004000		/* Visual erase for KILL.  */
+#define FLUSHO	0020000
+#define PENDIN	0040000		/* Retype pending input (state).  */
+#define TOSTOP	0100000		/* Send SIGTTOU for background output.  */
+#define ITOSTOP	TOSTOP
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0	/* Suspend output.  */
+#define	TCOON		1	/* Restart suspended output.  */
+#define	TCIOFF		2	/* Send a STOP character.  */
+#define	TCION		3	/* Send a START character.  */
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0	/* Discard data received but not yet read.  */
+#define	TCOFLUSH	1	/* Discard data written but not yet sent.  */
+#define	TCIOFLUSH	2	/* Discard all pending data.  */
+
+/* tcsetattr uses these */
+#define	TCSANOW		TCSETS	/* Change immediately.  */
+#define	TCSADRAIN	TCSETSW	/* Change when pending output is written.  */
+#define	TCSAFLUSH	TCSETSF	/* Flush pending input before changing.  */
+
+#endif /* _ASM_TERMBITS_H */
diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h
new file mode 100644
index 0000000..a275661
--- /dev/null
+++ b/arch/mips/include/asm/termios.h
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	int	sg_flags;	/* SGI special - int, not short */
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+        char    t_suspc;        /* stop process signal */
+        char    t_dsuspc;       /* delayed stop process signal */
+        char    t_rprntc;       /* reprint line */
+        char    t_flushc;       /* flush output (toggles) */
+        char    t_werasc;       /* word erase */
+        char    t_lnextc;       /* literal next character */
+};
+
+/* TIOCGSIZE, TIOCSSIZE not defined yet.  Only needed for SunOS source
+   compatibility anyway ... */
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC	8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	char c_line;			/* line discipline */
+	unsigned char c_cc[NCCS];	/* control characters */
+};
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ *	intr=^C		quit=^\		erase=del	kill=^U
+ *	vmin=\1		vtime=\0	eol2=\0		swtc=\0
+ *	start=^Q	stop=^S		susp=^Z		vdsusp=
+ *	reprint=^R	discard=^U	werase=^W	lnext=^V
+ *	eof=^D		eol=\0
+ */
+#define INIT_C_CC "\003\034\177\025\1\0\0\0\021\023\032\0\022\017\027\026\004\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001		/* line enable */
+#define TIOCM_DTR	0x002		/* data terminal ready */
+#define TIOCM_RTS	0x004		/* request to send */
+#define TIOCM_ST	0x010		/* secondary transmit */
+#define TIOCM_SR	0x020		/* secondary receive */
+#define TIOCM_CTS	0x040		/* clear to send */
+#define TIOCM_CAR	0x100		/* carrier detect */
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RNG	0x200		/* ring */
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_DSR	0x400		/* data set ready */
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	get_user((termios)->c_line, &(termio)->c_line); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line, &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_TERMIOS_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
new file mode 100644
index 0000000..3f76de7
--- /dev/null
+++ b/arch/mips/include/asm/thread_info.h
@@ -0,0 +1,153 @@
+/* thread_info.h: MIPS low-level thread information
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+
+#ifndef __ASSEMBLY__
+
+#include <asm/processor.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		tp_value;	/* thread pointer */
+	__u32			cpu;		/* current CPU */
+	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+
+	mm_segment_t		addr_limit;	/* thread address space:
+						   0-0xBFFFFFFF for user-thead
+						   0-0xFFFFFFFF for kernel-thread
+						*/
+	struct restart_block	restart_block;
+	struct pt_regs		*regs;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= _TIF_FIXADE,		\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* How to get the thread information struct from C.  */
+register struct thread_info *__current_thread_info __asm__("$28");
+#define current_thread_info()  __current_thread_info
+
+/* thread information allocation */
+#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT)
+#define THREAD_SIZE_ORDER (1)
+#endif
+#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_64BIT)
+#define THREAD_SIZE_ORDER (2)
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define THREAD_SIZE_ORDER (1)
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define THREAD_SIZE_ORDER (0)
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define THREAD_SIZE_ORDER (0)
+#endif
+
+#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_MASK (THREAD_SIZE - 1UL)
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+({								\
+	struct thread_info *ret;				\
+								\
+	ret = kzalloc(THREAD_SIZE, GFP_KERNEL);			\
+								\
+	ret;							\
+})
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(info) kfree(info)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_SYSCALL_AUDIT	3	/* syscall auditing active */
+#define TIF_SECCOMP		4	/* secure computing */
+#define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		18
+#define TIF_FREEZE		19
+#define TIF_FIXADE		20	/* Fix address errors in software */
+#define TIF_LOGADE		21	/* Log address errors to syslog */
+#define TIF_32BIT_REGS		22	/* also implies 16/32 fprs */
+#define TIF_32BIT_ADDR		23	/* 32-bit address space (o32/n32) */
+#define TIF_FPUBOUND		24	/* thread bound to FPU-full CPU set */
+#define TIF_LOAD_WATCH		25	/* If set, load watch registers */
+#define TIF_SYSCALL_TRACE	31	/* syscall trace active */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_FIXADE		(1<<TIF_FIXADE)
+#define _TIF_LOGADE		(1<<TIF_LOGADE)
+#define _TIF_32BIT_REGS		(1<<TIF_32BIT_REGS)
+#define _TIF_32BIT_ADDR		(1<<TIF_32BIT_ADDR)
+#define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
+#define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK		(0x0000ffef & ~_TIF_SECCOMP)
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK	(0x8000ffff & ~_TIF_SECCOMP)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
new file mode 100644
index 0000000..d3bd5c5
--- /dev/null
+++ b/arch/mips/include/asm/time.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2001, 2002, MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (c) 2003  Maciej W. Rozycki
+ *
+ * include/asm-mips/time.h
+ *     header file for the new style time.c file and time services.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_TIME_H
+#define _ASM_TIME_H
+
+#include <linux/rtc.h>
+#include <linux/spinlock.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+
+extern spinlock_t rtc_lock;
+
+/*
+ * RTC ops.  By default, they point to weak no-op RTC functions.
+ *	rtc_mips_set_time - reverse the above translation and set time to RTC.
+ *	rtc_mips_set_mmss - similar to rtc_set_time, but only min and sec need
+ *			to be set.  Used by RTC sync-up.
+ */
+extern int rtc_mips_set_time(unsigned long);
+extern int rtc_mips_set_mmss(unsigned long);
+
+/*
+ * board specific routines required by time_init().
+ */
+extern void plat_time_init(void);
+
+/*
+ * mips_hpt_frequency - must be set if you intend to use an R4k-compatible
+ * counter as a timer interrupt source.
+ */
+extern unsigned int mips_hpt_frequency;
+
+/*
+ * The performance counter IRQ on MIPS is a close relative to the timer IRQ
+ * so it lives here.
+ */
+extern int (*perf_irq)(void);
+
+/*
+ * Initialize the calling CPU's compare interrupt as clockevent device
+ */
+#ifdef CONFIG_CEVT_R4K
+extern int mips_clockevent_init(void);
+extern unsigned int __weak get_c0_compare_int(void);
+#else
+static inline int mips_clockevent_init(void)
+{
+	return -ENXIO;
+}
+#endif
+
+/*
+ * Initialize the count register as a clocksource
+ */
+#ifdef CONFIG_CEVT_R4K
+extern int init_mips_clocksource(void);
+#else
+static inline int init_mips_clocksource(void)
+{
+	return 0;
+}
+#endif
+
+extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock);
+extern void clockevent_set_clock(struct clock_event_device *cd,
+		unsigned int clock);
+
+#endif /* _ASM_TIME_H */
diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h
new file mode 100644
index 0000000..6529704
--- /dev/null
+++ b/arch/mips/include/asm/timex.h
@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 1999, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#ifdef __KERNEL__
+
+#include <asm/mipsregs.h>
+
+/*
+ * This is the clock rate of the i8253 PIT.  A MIPS system may not have
+ * a PIT by the symbol is used all over the kernel including some APIs.
+ * So keeping it defined to the number for the PIT is the only sane thing
+ * for now.
+ */
+#define CLOCK_TICK_RATE 1193182
+
+/*
+ * Standard way to access the cycle counter.
+ * Currently only used on SMP for scheduling.
+ *
+ * Only the low 32 bits are available as a continuously counting entity.
+ * But this only means we'll force a reschedule every 8 seconds or so,
+ * which isn't an evil thing.
+ *
+ * We know that all SMP capable CPUs have cycle counters.
+ */
+
+typedef unsigned int cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /*  _ASM_TIMEX_H */
diff --git a/arch/mips/include/asm/titan_dep.h b/arch/mips/include/asm/titan_dep.h
new file mode 100644
index 0000000..fee1908
--- /dev/null
+++ b/arch/mips/include/asm/titan_dep.h
@@ -0,0 +1,231 @@
+/*
+ * Copyright 2003 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Board specific definititions for the PMC-Sierra Yosemite
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __TITAN_DEP_H__
+#define __TITAN_DEP_H__
+
+#include <asm/addrspace.h>              /* for KSEG1ADDR() */
+#include <asm/byteorder.h>              /* for cpu_to_le32() */
+
+#define TITAN_READ(ofs)							\
+	(*(volatile u32 *)(ocd_base+(ofs)))
+#define TITAN_READ_16(ofs)						\
+	(*(volatile u16 *)(ocd_base+(ofs)))
+#define TITAN_READ_8(ofs)						\
+	(*(volatile u8 *)(ocd_base+(ofs)))
+
+#define TITAN_WRITE(ofs, data)						\
+	do { *(volatile u32 *)(ocd_base+(ofs)) = (data); } while (0)
+#define TITAN_WRITE_16(ofs, data)					\
+	do { *(volatile u16 *)(ocd_base+(ofs)) = (data); } while (0)
+#define TITAN_WRITE_8(ofs, data)					\
+	do { *(volatile u8 *)(ocd_base+(ofs)) = (data); } while (0)
+
+/*
+ * PCI specific defines
+ */
+#define	TITAN_PCI_0_CONFIG_ADDRESS	0x780
+#define	TITAN_PCI_0_CONFIG_DATA		0x784
+
+/*
+ * HT specific defines
+ */
+#define RM9000x2_HTLINK_REG		0xbb000644
+#define RM9000x2_BASE_ADDR		0xbb000000
+
+#define OCD_BASE			0xfb000000UL
+#define OCD_SIZE			0x3000UL
+
+extern unsigned long ocd_base;
+
+/*
+ * OCD Registers
+ */
+#define RM9000x2_OCD_LKB5		0x0128		/* Ethernet */
+#define RM9000x2_OCD_LKM5		0x012c
+
+#define RM9000x2_OCD_LKB7		0x0138		/* HT Region 0 */
+#define RM9000x2_OCD_LKM7		0x013c
+#define RM9000x2_OCD_LKB8		0x0140		/* HT Region 1 */
+#define RM9000x2_OCD_LKM8		0x0144
+
+#define RM9000x2_OCD_LKB9		0x0148		/* Local Bus */
+#define RM9000x2_OCD_LKM9		0x014c
+#define RM9000x2_OCD_LKB10		0x0150
+#define RM9000x2_OCD_LKM10		0x0154
+#define RM9000x2_OCD_LKB11		0x0158
+#define RM9000x2_OCD_LKM11		0x015c
+#define RM9000x2_OCD_LKB12		0x0160
+#define RM9000x2_OCD_LKM12		0x0164
+
+#define RM9000x2_OCD_LKB13		0x0168		/* Scratch RAM */
+#define RM9000x2_OCD_LKM13		0x016c
+
+#define RM9000x2_OCD_LPD0		0x0200		/* Local Bus */
+#define RM9000x2_OCD_LPD1		0x0210
+#define RM9000x2_OCD_LPD2		0x0220
+#define RM9000x2_OCD_LPD3		0x0230
+
+#define RM9000x2_OCD_HTDVID		0x0600	/* HT Device Header */
+#define RM9000x2_OCD_HTSC		0x0604
+#define RM9000x2_OCD_HTCCR		0x0608
+#define RM9000x2_OCD_HTBHL		0x060c
+#define RM9000x2_OCD_HTBAR0		0x0610
+#define RM9000x2_OCD_HTBAR1		0x0614
+#define RM9000x2_OCD_HTBAR2		0x0618
+#define RM9000x2_OCD_HTBAR3		0x061c
+#define RM9000x2_OCD_HTBAR4		0x0620
+#define RM9000x2_OCD_HTBAR5		0x0624
+#define RM9000x2_OCD_HTCBCPT		0x0628
+#define RM9000x2_OCD_HTSDVID		0x062c
+#define RM9000x2_OCD_HTXRA		0x0630
+#define RM9000x2_OCD_HTCAP1		0x0634
+#define RM9000x2_OCD_HTIL		0x063c
+
+#define RM9000x2_OCD_HTLCC		0x0640	/* HT Capability Block */
+#define RM9000x2_OCD_HTLINK		0x0644
+#define RM9000x2_OCD_HTFQREV		0x0648
+
+#define RM9000x2_OCD_HTERCTL		0x0668	/* HT Controller */
+#define RM9000x2_OCD_HTRXDB		0x066c
+#define RM9000x2_OCD_HTIMPED		0x0670
+#define RM9000x2_OCD_HTSWIMP		0x0674
+#define RM9000x2_OCD_HTCAL		0x0678
+
+#define RM9000x2_OCD_HTBAA30		0x0680
+#define RM9000x2_OCD_HTBAA54		0x0684
+#define RM9000x2_OCD_HTMASK0		0x0688
+#define RM9000x2_OCD_HTMASK1		0x068c
+#define RM9000x2_OCD_HTMASK2		0x0690
+#define RM9000x2_OCD_HTMASK3		0x0694
+#define RM9000x2_OCD_HTMASK4		0x0698
+#define RM9000x2_OCD_HTMASK5		0x069c
+
+#define RM9000x2_OCD_HTIFCTL		0x06a0
+#define RM9000x2_OCD_HTPLL		0x06a4
+
+#define RM9000x2_OCD_HTSRI		0x06b0
+#define RM9000x2_OCD_HTRXNUM		0x06b4
+#define RM9000x2_OCD_HTTXNUM		0x06b8
+
+#define RM9000x2_OCD_HTTXCNT		0x06c8
+
+#define RM9000x2_OCD_HTERROR		0x06d8
+#define RM9000x2_OCD_HTRCRCE		0x06dc
+#define RM9000x2_OCD_HTEOI		0x06e0
+
+#define RM9000x2_OCD_CRCR		0x06f0
+
+#define RM9000x2_OCD_HTCFGA		0x06f8
+#define RM9000x2_OCD_HTCFGD		0x06fc
+
+#define RM9000x2_OCD_INTMSG		0x0a00
+
+#define RM9000x2_OCD_INTPIN0		0x0a40
+#define RM9000x2_OCD_INTPIN1		0x0a44
+#define RM9000x2_OCD_INTPIN2		0x0a48
+#define RM9000x2_OCD_INTPIN3		0x0a4c
+#define RM9000x2_OCD_INTPIN4		0x0a50
+#define RM9000x2_OCD_INTPIN5		0x0a54
+#define RM9000x2_OCD_INTPIN6		0x0a58
+#define RM9000x2_OCD_INTPIN7		0x0a5c
+#define RM9000x2_OCD_SEM		0x0a60
+#define RM9000x2_OCD_SEMSET		0x0a64
+#define RM9000x2_OCD_SEMCLR		0x0a68
+
+#define RM9000x2_OCD_TKT		0x0a70
+#define RM9000x2_OCD_TKTINC		0x0a74
+
+#define RM9000x2_OCD_NMICONFIG		0x0ac0		/* Interrupts */
+#define RM9000x2_OCD_INTP0PRI		0x1a80
+#define RM9000x2_OCD_INTP1PRI		0x1a80
+#define RM9000x2_OCD_INTP0STATUS0	0x1b00
+#define RM9000x2_OCD_INTP0MASK0		0x1b04
+#define RM9000x2_OCD_INTP0SET0		0x1b08
+#define RM9000x2_OCD_INTP0CLEAR0	0x1b0c
+#define RM9000x2_OCD_INTP0STATUS1	0x1b10
+#define RM9000x2_OCD_INTP0MASK1		0x1b14
+#define RM9000x2_OCD_INTP0SET1		0x1b18
+#define RM9000x2_OCD_INTP0CLEAR1	0x1b1c
+#define RM9000x2_OCD_INTP0STATUS2	0x1b20
+#define RM9000x2_OCD_INTP0MASK2		0x1b24
+#define RM9000x2_OCD_INTP0SET2		0x1b28
+#define RM9000x2_OCD_INTP0CLEAR2	0x1b2c
+#define RM9000x2_OCD_INTP0STATUS3	0x1b30
+#define RM9000x2_OCD_INTP0MASK3		0x1b34
+#define RM9000x2_OCD_INTP0SET3		0x1b38
+#define RM9000x2_OCD_INTP0CLEAR3	0x1b3c
+#define RM9000x2_OCD_INTP0STATUS4	0x1b40
+#define RM9000x2_OCD_INTP0MASK4		0x1b44
+#define RM9000x2_OCD_INTP0SET4		0x1b48
+#define RM9000x2_OCD_INTP0CLEAR4	0x1b4c
+#define RM9000x2_OCD_INTP0STATUS5	0x1b50
+#define RM9000x2_OCD_INTP0MASK5		0x1b54
+#define RM9000x2_OCD_INTP0SET5		0x1b58
+#define RM9000x2_OCD_INTP0CLEAR5	0x1b5c
+#define RM9000x2_OCD_INTP0STATUS6	0x1b60
+#define RM9000x2_OCD_INTP0MASK6		0x1b64
+#define RM9000x2_OCD_INTP0SET6		0x1b68
+#define RM9000x2_OCD_INTP0CLEAR6	0x1b6c
+#define RM9000x2_OCD_INTP0STATUS7	0x1b70
+#define RM9000x2_OCD_INTP0MASK7		0x1b74
+#define RM9000x2_OCD_INTP0SET7		0x1b78
+#define RM9000x2_OCD_INTP0CLEAR7	0x1b7c
+#define RM9000x2_OCD_INTP1STATUS0	0x2b00
+#define RM9000x2_OCD_INTP1MASK0		0x2b04
+#define RM9000x2_OCD_INTP1SET0		0x2b08
+#define RM9000x2_OCD_INTP1CLEAR0	0x2b0c
+#define RM9000x2_OCD_INTP1STATUS1	0x2b10
+#define RM9000x2_OCD_INTP1MASK1		0x2b14
+#define RM9000x2_OCD_INTP1SET1		0x2b18
+#define RM9000x2_OCD_INTP1CLEAR1	0x2b1c
+#define RM9000x2_OCD_INTP1STATUS2	0x2b20
+#define RM9000x2_OCD_INTP1MASK2		0x2b24
+#define RM9000x2_OCD_INTP1SET2		0x2b28
+#define RM9000x2_OCD_INTP1CLEAR2	0x2b2c
+#define RM9000x2_OCD_INTP1STATUS3	0x2b30
+#define RM9000x2_OCD_INTP1MASK3		0x2b34
+#define RM9000x2_OCD_INTP1SET3		0x2b38
+#define RM9000x2_OCD_INTP1CLEAR3	0x2b3c
+#define RM9000x2_OCD_INTP1STATUS4	0x2b40
+#define RM9000x2_OCD_INTP1MASK4		0x2b44
+#define RM9000x2_OCD_INTP1SET4		0x2b48
+#define RM9000x2_OCD_INTP1CLEAR4	0x2b4c
+#define RM9000x2_OCD_INTP1STATUS5	0x2b50
+#define RM9000x2_OCD_INTP1MASK5		0x2b54
+#define RM9000x2_OCD_INTP1SET5		0x2b58
+#define RM9000x2_OCD_INTP1CLEAR5	0x2b5c
+#define RM9000x2_OCD_INTP1STATUS6	0x2b60
+#define RM9000x2_OCD_INTP1MASK6		0x2b64
+#define RM9000x2_OCD_INTP1SET6		0x2b68
+#define RM9000x2_OCD_INTP1CLEAR6	0x2b6c
+#define RM9000x2_OCD_INTP1STATUS7	0x2b70
+#define RM9000x2_OCD_INTP1MASK7		0x2b74
+#define RM9000x2_OCD_INTP1SET7		0x2b78
+#define RM9000x2_OCD_INTP1CLEAR7	0x2b7c
+
+#define OCD_READ(reg)		(*(volatile unsigned int *)(ocd_base + (reg)))
+#define OCD_WRITE(reg, val)					\
+	do { *(volatile unsigned int *)(ocd_base + (reg)) = (val); } while (0)
+
+/*
+ * Hypertransport specific macros
+ */
+#define RM9K_WRITE(ofs, data)   *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) = data
+#define RM9K_WRITE_8(ofs, data) *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) = data
+#define RM9K_WRITE_16(ofs, data) *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) = data
+
+#define RM9K_READ(ofs, val)     *(val) = *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs)
+#define RM9K_READ_8(ofs, val)   *(val) = *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs)
+#define RM9K_READ_16(ofs, val)  *(val) = *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs)
+
+#endif
diff --git a/arch/mips/include/asm/tlb.h b/arch/mips/include/asm/tlb.h
new file mode 100644
index 0000000..80d9dfc
--- /dev/null
+++ b/arch/mips/include/asm/tlb.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_TLB_H
+#define __ASM_TLB_H
+
+/*
+ * MIPS doesn't need any special per-pte or per-vma handling, except
+ * we need to flush cache for area to be unmapped.
+ */
+#define tlb_start_vma(tlb, vma) 				\
+	do {							\
+		if (!tlb->fullmm)				\
+			flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+	}  while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up.
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* __ASM_TLB_H */
diff --git a/arch/mips/include/asm/tlbdebug.h b/arch/mips/include/asm/tlbdebug.h
new file mode 100644
index 0000000..bb8f5c2
--- /dev/null
+++ b/arch/mips/include/asm/tlbdebug.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002 by Ralf Baechle
+ */
+#ifndef __ASM_TLBDEBUG_H
+#define __ASM_TLBDEBUG_H
+
+/*
+ * TLB debugging functions:
+ */
+extern void dump_tlb_all(void);
+
+#endif /* __ASM_TLBDEBUG_H */
diff --git a/arch/mips/include/asm/tlbflush.h b/arch/mips/include/asm/tlbflush.h
new file mode 100644
index 0000000..86b21de
--- /dev/null
+++ b/arch/mips/include/asm/tlbflush.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_TLBFLUSH_H
+#define __ASM_TLBFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_all() flushes all processes TLB entries
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB entries
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_range(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end);
+extern void local_flush_tlb_kernel_range(unsigned long start,
+	unsigned long end);
+extern void local_flush_tlb_page(struct vm_area_struct *vma,
+	unsigned long page);
+extern void local_flush_tlb_one(unsigned long vaddr);
+
+#ifdef CONFIG_SMP
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long,
+	unsigned long);
+extern void flush_tlb_kernel_range(unsigned long, unsigned long);
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void flush_tlb_one(unsigned long vaddr);
+
+#else /* CONFIG_SMP */
+
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#define flush_tlb_range(vma, vmaddr, end)	local_flush_tlb_range(vma, vmaddr, end)
+#define flush_tlb_kernel_range(vmaddr,end) \
+	local_flush_tlb_kernel_range(vmaddr, end)
+#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_one(vaddr)		local_flush_tlb_one(vaddr)
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_TLBFLUSH_H */
diff --git a/arch/mips/include/asm/topology.h b/arch/mips/include/asm/topology.h
new file mode 100644
index 0000000..259145e
--- /dev/null
+++ b/arch/mips/include/asm/topology.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_TOPOLOGY_H
+#define __ASM_TOPOLOGY_H
+
+#include <topology.h>
+
+#ifdef CONFIG_SMP
+#define smt_capable()   (smp_num_siblings > 1)
+#endif
+
+#endif /* __ASM_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h
new file mode 100644
index 0000000..90ff2f4
--- /dev/null
+++ b/arch/mips/include/asm/traps.h
@@ -0,0 +1,28 @@
+/*
+ *	Trap handling definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_TRAPS_H
+#define _ASM_TRAPS_H
+
+/*
+ * Possible status responses for a board_be_handler backend.
+ */
+#define MIPS_BE_DISCARD	0		/* return with no action */
+#define MIPS_BE_FIXUP	1		/* return to the fixup code */
+#define MIPS_BE_FATAL	2		/* treat as an unrecoverable error */
+
+extern void (*board_be_init)(void);
+extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+
+extern void (*board_nmi_handler_setup)(void);
+extern void (*board_ejtag_handler_setup)(void);
+extern void (*board_bind_eic_interrupt)(int irq, int regset);
+
+#endif /* _ASM_TRAPS_H */
diff --git a/arch/mips/include/asm/txx9/boards.h b/arch/mips/include/asm/txx9/boards.h
new file mode 100644
index 0000000..cbe9476
--- /dev/null
+++ b/arch/mips/include/asm/txx9/boards.h
@@ -0,0 +1,13 @@
+#ifdef CONFIG_TOSHIBA_JMR3927
+BOARD_VEC(jmr3927_vec)
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4927
+BOARD_VEC(rbtx4927_vec)
+BOARD_VEC(rbtx4937_vec)
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4938
+BOARD_VEC(rbtx4938_vec)
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4939
+BOARD_VEC(rbtx4939_vec)
+#endif
diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h
new file mode 100644
index 0000000..4316a3e
--- /dev/null
+++ b/arch/mips/include/asm/txx9/generic.h
@@ -0,0 +1,89 @@
+/*
+ * linux/include/asm-mips/txx9/generic.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_GENERIC_H
+#define __ASM_TXX9_GENERIC_H
+
+#include <linux/init.h>
+#include <linux/ioport.h>	/* for struct resource */
+
+extern struct resource txx9_ce_res[];
+#define TXX9_CE(n)	(unsigned long)(txx9_ce_res[(n)].start)
+extern unsigned int txx9_pcode;
+extern char txx9_pcode_str[8];
+void txx9_reg_res_init(unsigned int pcode, unsigned long base,
+		       unsigned long size);
+
+extern unsigned int txx9_master_clock;
+extern unsigned int txx9_cpu_clock;
+extern unsigned int txx9_gbus_clock;
+#define TXX9_IMCLK	(txx9_gbus_clock / 2)
+
+extern int txx9_ccfg_toeon;
+struct uart_port;
+int early_serial_txx9_setup(struct uart_port *port);
+
+struct pci_dev;
+struct txx9_board_vec {
+	const char *system;
+	void (*prom_init)(void);
+	void (*mem_setup)(void);
+	void (*irq_setup)(void);
+	void (*time_init)(void);
+	void (*arch_init)(void);
+	void (*device_init)(void);
+#ifdef CONFIG_PCI
+	int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
+#endif
+};
+extern struct txx9_board_vec *txx9_board_vec;
+extern int (*txx9_irq_dispatch)(int pending);
+char *prom_getcmdline(void);
+const char *prom_getenv(const char *name);
+void txx9_wdt_init(unsigned long base);
+void txx9_wdt_now(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+		   unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
+
+struct physmap_flash_data;
+void txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size,
+			     const struct physmap_flash_data *pdata);
+
+/* 8 bit version of __fls(): find first bit set (returns 0..7) */
+static inline unsigned int __fls8(unsigned char x)
+{
+	int r = 7;
+
+	if (!(x & 0xf0)) {
+		r -= 4;
+		x <<= 4;
+	}
+	if (!(x & 0xc0)) {
+		r -= 2;
+		x <<= 2;
+	}
+	if (!(x & 0x80))
+		r -= 1;
+	return r;
+}
+
+void txx9_iocled_init(unsigned long baseaddr,
+		      int basenum, unsigned int num, int lowactive,
+		      const char *color, char **deftriggers);
+
+#endif /* __ASM_TXX9_GENERIC_H */
diff --git a/arch/mips/include/asm/txx9/jmr3927.h b/arch/mips/include/asm/txx9/jmr3927.h
new file mode 100644
index 0000000..a409c44
--- /dev/null
+++ b/arch/mips/include/asm/txx9/jmr3927.h
@@ -0,0 +1,180 @@
+/*
+ * Defines for the TJSYS JMR-TX3927
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#ifndef __ASM_TXX9_JMR3927_H
+#define __ASM_TXX9_JMR3927_H
+
+#include <asm/txx9/tx3927.h>
+#include <asm/addrspace.h>
+#include <asm/system.h>
+#include <asm/txx9irq.h>
+
+/* CS */
+#define JMR3927_ROMCE0	0x1fc00000	/* 4M */
+#define JMR3927_ROMCE1	0x1e000000	/* 4M */
+#define JMR3927_ROMCE2	0x14000000	/* 16M */
+#define JMR3927_ROMCE3	0x10000000	/* 64M */
+#define JMR3927_ROMCE5	0x1d000000	/* 4M */
+#define JMR3927_SDCS0	0x00000000	/* 32M */
+#define JMR3927_SDCS1	0x02000000	/* 32M */
+/* PCI Direct Mappings */
+
+#define JMR3927_PCIMEM	0x08000000
+#define JMR3927_PCIMEM_SIZE	0x08000000	/* 128M */
+#define JMR3927_PCIIO	0x15000000
+#define JMR3927_PCIIO_SIZE	0x01000000	/* 16M */
+
+#define JMR3927_SDRAM_SIZE	0x02000000	/* 32M */
+#define JMR3927_PORT_BASE	KSEG1
+
+/* Address map (virtual address) */
+#define JMR3927_ROM0_BASE	(KSEG1 + JMR3927_ROMCE0)
+#define JMR3927_ROM1_BASE	(KSEG1 + JMR3927_ROMCE1)
+#define JMR3927_IOC_BASE	(KSEG1 + JMR3927_ROMCE2)
+#define JMR3927_PCIMEM_BASE	(KSEG1 + JMR3927_PCIMEM)
+#define JMR3927_PCIIO_BASE	(KSEG1 + JMR3927_PCIIO)
+
+#define JMR3927_IOC_REV_ADDR	(JMR3927_IOC_BASE + 0x00000000)
+#define JMR3927_IOC_NVRAMB_ADDR	(JMR3927_IOC_BASE + 0x00010000)
+#define JMR3927_IOC_LED_ADDR	(JMR3927_IOC_BASE + 0x00020000)
+#define JMR3927_IOC_DIPSW_ADDR	(JMR3927_IOC_BASE + 0x00030000)
+#define JMR3927_IOC_BREV_ADDR	(JMR3927_IOC_BASE + 0x00040000)
+#define JMR3927_IOC_DTR_ADDR	(JMR3927_IOC_BASE + 0x00050000)
+#define JMR3927_IOC_INTS1_ADDR	(JMR3927_IOC_BASE + 0x00080000)
+#define JMR3927_IOC_INTS2_ADDR	(JMR3927_IOC_BASE + 0x00090000)
+#define JMR3927_IOC_INTM_ADDR	(JMR3927_IOC_BASE + 0x000a0000)
+#define JMR3927_IOC_INTP_ADDR	(JMR3927_IOC_BASE + 0x000b0000)
+#define JMR3927_IOC_RESET_ADDR	(JMR3927_IOC_BASE + 0x000f0000)
+
+/* Flash ROM */
+#define JMR3927_FLASH_BASE	(JMR3927_ROM0_BASE)
+#define JMR3927_FLASH_SIZE	0x00400000
+
+/* bits for IOC_REV/IOC_BREV (high byte) */
+#define JMR3927_IDT_MASK	0xfc
+#define JMR3927_REV_MASK	0x03
+#define JMR3927_IOC_IDT		0xe0
+
+/* bits for IOC_INTS1/IOC_INTS2/IOC_INTM/IOC_INTP (high byte) */
+#define JMR3927_IOC_INTB_PCIA	0
+#define JMR3927_IOC_INTB_PCIB	1
+#define JMR3927_IOC_INTB_PCIC	2
+#define JMR3927_IOC_INTB_PCID	3
+#define JMR3927_IOC_INTB_MODEM	4
+#define JMR3927_IOC_INTB_INT6	5
+#define JMR3927_IOC_INTB_INT7	6
+#define JMR3927_IOC_INTB_SOFT	7
+#define JMR3927_IOC_INTF_PCIA	(1 << JMR3927_IOC_INTF_PCIA)
+#define JMR3927_IOC_INTF_PCIB	(1 << JMR3927_IOC_INTB_PCIB)
+#define JMR3927_IOC_INTF_PCIC	(1 << JMR3927_IOC_INTB_PCIC)
+#define JMR3927_IOC_INTF_PCID	(1 << JMR3927_IOC_INTB_PCID)
+#define JMR3927_IOC_INTF_MODEM	(1 << JMR3927_IOC_INTB_MODEM)
+#define JMR3927_IOC_INTF_INT6	(1 << JMR3927_IOC_INTB_INT6)
+#define JMR3927_IOC_INTF_INT7	(1 << JMR3927_IOC_INTB_INT7)
+#define JMR3927_IOC_INTF_SOFT	(1 << JMR3927_IOC_INTB_SOFT)
+
+/* bits for IOC_RESET (high byte) */
+#define JMR3927_IOC_RESET_CPU	1
+#define JMR3927_IOC_RESET_PCI	2
+
+#if defined(__BIG_ENDIAN)
+#define jmr3927_ioc_reg_out(d, a)	((*(volatile unsigned char *)(a)) = (d))
+#define jmr3927_ioc_reg_in(a)		(*(volatile unsigned char *)(a))
+#elif defined(__LITTLE_ENDIAN)
+#define jmr3927_ioc_reg_out(d, a)	((*(volatile unsigned char *)((a)^1)) = (d))
+#define jmr3927_ioc_reg_in(a)		(*(volatile unsigned char *)((a)^1))
+#else
+#error "No Endian"
+#endif
+
+/* LED macro */
+#define jmr3927_led_set(n/*0-16*/)	jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR)
+
+#define jmr3927_led_and_set(n/*0-16*/)	jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR)
+
+/* DIPSW4 macro */
+#define jmr3927_dipsw1()	(gpio_get_value(11) == 0)
+#define jmr3927_dipsw2()	(gpio_get_value(10) == 0)
+#define jmr3927_dipsw3()	((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0)
+#define jmr3927_dipsw4()	((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0)
+
+/*
+ * IRQ mappings
+ */
+
+/* These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an JMR machine.  Add new 'spaces' as new
+ * IRQ hardware is supported.
+ */
+#define JMR3927_NR_IRQ_IRC	16	/* On-Chip IRC */
+#define JMR3927_NR_IRQ_IOC	8	/* PCI/MODEM/INT[6:7] */
+
+#define JMR3927_IRQ_IRC	TXX9_IRQ_BASE
+#define JMR3927_IRQ_IOC	(JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC)
+#define JMR3927_IRQ_END	(JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC)
+
+#define JMR3927_IRQ_IRC_INT0	(JMR3927_IRQ_IRC + TX3927_IR_INT0)
+#define JMR3927_IRQ_IRC_INT1	(JMR3927_IRQ_IRC + TX3927_IR_INT1)
+#define JMR3927_IRQ_IRC_INT2	(JMR3927_IRQ_IRC + TX3927_IR_INT2)
+#define JMR3927_IRQ_IRC_INT3	(JMR3927_IRQ_IRC + TX3927_IR_INT3)
+#define JMR3927_IRQ_IRC_INT4	(JMR3927_IRQ_IRC + TX3927_IR_INT4)
+#define JMR3927_IRQ_IRC_INT5	(JMR3927_IRQ_IRC + TX3927_IR_INT5)
+#define JMR3927_IRQ_IRC_SIO0	(JMR3927_IRQ_IRC + TX3927_IR_SIO0)
+#define JMR3927_IRQ_IRC_SIO1	(JMR3927_IRQ_IRC + TX3927_IR_SIO1)
+#define JMR3927_IRQ_IRC_SIO(ch)	(JMR3927_IRQ_IRC + TX3927_IR_SIO(ch))
+#define JMR3927_IRQ_IRC_DMA	(JMR3927_IRQ_IRC + TX3927_IR_DMA)
+#define JMR3927_IRQ_IRC_PIO	(JMR3927_IRQ_IRC + TX3927_IR_PIO)
+#define JMR3927_IRQ_IRC_PCI	(JMR3927_IRQ_IRC + TX3927_IR_PCI)
+#define JMR3927_IRQ_IRC_TMR(ch)	(JMR3927_IRQ_IRC + TX3927_IR_TMR(ch))
+#define JMR3927_IRQ_IOC_PCIA	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA)
+#define JMR3927_IRQ_IOC_PCIB	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB)
+#define JMR3927_IRQ_IOC_PCIC	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC)
+#define JMR3927_IRQ_IOC_PCID	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCID)
+#define JMR3927_IRQ_IOC_MODEM	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_MODEM)
+#define JMR3927_IRQ_IOC_INT6	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT6)
+#define JMR3927_IRQ_IOC_INT7	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT7)
+#define JMR3927_IRQ_IOC_SOFT	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_SOFT)
+
+/* IOC (PCI, MODEM) */
+#define JMR3927_IRQ_IOCINT	JMR3927_IRQ_IRC_INT1
+/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */
+#define JMR3927_IRQ_ETHER0	JMR3927_IRQ_IRC_INT3
+
+/* Clocks */
+#define JMR3927_CORECLK	132710400	/* 132.7MHz */
+
+/*
+ * TX3927 Pin Configuration:
+ *
+ *	PCFG bits		Avail			Dead
+ *	SELSIO[1:0]:11		RXD[1:0], TXD[1:0]	PIO[6:3]
+ *	SELSIOC[0]:1		CTS[0], RTS[0]		INT[5:4]
+ *	SELSIOC[1]:0,SELDSF:0,	GSDAO[0],GPCST[3]	CTS[1], RTS[1],DSF,
+ *	  GDBGE*					  PIO[2:1]
+ *	SELDMA[2]:1		DMAREQ[2],DMAACK[2]	PIO[13:12]
+ *	SELTMR[2:0]:000					TIMER[1:0]
+ *	SELCS:0,SELDMA[1]:0	PIO[11;10]		SDCS_CE[7:6],
+ *							  DMAREQ[1],DMAACK[1]
+ *	SELDMA[0]:1		DMAREQ[0],DMAACK[0]	PIO[9:8]
+ *	SELDMA[3]:1		DMAREQ[3],DMAACK[3]	PIO[15:14]
+ *	SELDONE:1		DMADONE			PIO[7]
+ *
+ * Usable pins are:
+ *	RXD[1;0],TXD[1:0],CTS[0],RTS[0],
+ *	DMAREQ[0,2,3],DMAACK[0,2,3],DMADONE,PIO[0,10,11]
+ *	INT[3:0]
+ */
+
+void jmr3927_prom_init(void);
+void jmr3927_irq_setup(void);
+struct pci_dev;
+int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_JMR3927_H */
diff --git a/arch/mips/include/asm/txx9/pci.h b/arch/mips/include/asm/txx9/pci.h
new file mode 100644
index 0000000..3d32529
--- /dev/null
+++ b/arch/mips/include/asm/txx9/pci.h
@@ -0,0 +1,39 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_PCI_H
+#define __ASM_TXX9_PCI_H
+
+#include <linux/pci.h>
+
+extern struct pci_controller txx9_primary_pcic;
+struct pci_controller *
+txx9_alloc_pci_controller(struct pci_controller *pcic,
+			  unsigned long mem_base, unsigned long mem_size,
+			  unsigned long io_base, unsigned long io_size);
+
+int txx9_pci66_check(struct pci_controller *hose, int top_bus,
+			int current_bus);
+extern int txx9_pci_mem_high __initdata;
+
+extern int txx9_pci_option;
+#define TXX9_PCI_OPT_PICMG	0x0002
+#define TXX9_PCI_OPT_CLK_33	0x0008
+#define TXX9_PCI_OPT_CLK_66	0x0010
+#define TXX9_PCI_OPT_CLK_MASK	\
+	(TXX9_PCI_OPT_CLK_33 | TXX9_PCI_OPT_CLK_66)
+#define TXX9_PCI_OPT_CLK_AUTO	TXX9_PCI_OPT_CLK_MASK
+
+enum txx9_pci_err_action {
+	TXX9_PCI_ERR_REPORT,
+	TXX9_PCI_ERR_IGNORE,
+	TXX9_PCI_ERR_PANIC,
+};
+extern enum txx9_pci_err_action txx9_pci_err_action;
+
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
+#endif /* __ASM_TXX9_PCI_H */
diff --git a/arch/mips/include/asm/txx9/rbtx4927.h b/arch/mips/include/asm/txx9/rbtx4927.h
new file mode 100644
index 0000000..b2adab3
--- /dev/null
+++ b/arch/mips/include/asm/txx9/rbtx4927.h
@@ -0,0 +1,92 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_TXX9_RBTX4927_H
+#define __ASM_TXX9_RBTX4927_H
+
+#include <asm/txx9/tx4927.h>
+
+#define RBTX4927_PCIMEM		0x08000000
+#define RBTX4927_PCIMEM_SIZE	0x08000000
+#define RBTX4927_PCIIO		0x16000000
+#define RBTX4927_PCIIO_SIZE	0x01000000
+
+#define RBTX4927_LED_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001000)
+#define RBTX4927_IMASK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002000)
+#define RBTX4927_IMSTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002006)
+#define RBTX4927_SOFTINT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00003000)
+#define RBTX4927_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f000)
+#define RBTX4927_SOFTRESETLOCK_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f002)
+#define RBTX4927_PCIRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f006)
+#define RBTX4927_BRAMRTC_BASE	(IO_BASE + TXX9_CE(2) + 0x00010000)
+#define RBTX4927_ETHER_BASE	(IO_BASE + TXX9_CE(2) + 0x00020000)
+
+/* Ethernet port address */
+#define RBTX4927_ETHER_ADDR	(RBTX4927_ETHER_BASE + 0x280)
+
+#define rbtx4927_imask_addr	((__u8 __iomem *)RBTX4927_IMASK_ADDR)
+#define rbtx4927_imstat_addr	((__u8 __iomem *)RBTX4927_IMSTAT_ADDR)
+#define rbtx4927_softint_addr	((__u8 __iomem *)RBTX4927_SOFTINT_ADDR)
+#define rbtx4927_softreset_addr	((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR)
+#define rbtx4927_softresetlock_addr	\
+				((__u8 __iomem *)RBTX4927_SOFTRESETLOCK_ADDR)
+#define rbtx4927_pcireset_addr	((__u8 __iomem *)RBTX4927_PCIRESET_ADDR)
+
+/* bits for ISTAT/IMASK/IMSTAT */
+#define RBTX4927_INTB_PCID	0
+#define RBTX4927_INTB_PCIC	1
+#define RBTX4927_INTB_PCIB	2
+#define RBTX4927_INTB_PCIA	3
+#define RBTX4927_INTF_PCID	(1 << RBTX4927_INTB_PCID)
+#define RBTX4927_INTF_PCIC	(1 << RBTX4927_INTB_PCIC)
+#define RBTX4927_INTF_PCIB	(1 << RBTX4927_INTB_PCIB)
+#define RBTX4927_INTF_PCIA	(1 << RBTX4927_INTB_PCIA)
+
+#define RBTX4927_NR_IRQ_IOC	8	/* IOC */
+
+#define RBTX4927_IRQ_IOC	(TXX9_IRQ_BASE + TX4927_NUM_IR)
+#define RBTX4927_IRQ_IOC_PCID	(RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID)
+#define RBTX4927_IRQ_IOC_PCIC	(RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC)
+#define RBTX4927_IRQ_IOC_PCIB	(RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB)
+#define RBTX4927_IRQ_IOC_PCIA	(RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA)
+
+#define RBTX4927_IRQ_IOCINT	(TXX9_IRQ_BASE + TX4927_IR_INT(1))
+
+#ifdef CONFIG_PCI
+#define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO
+#else
+#define RBTX4927_ISA_IO_OFFSET 0
+#endif
+
+#define RBTX4927_RTL_8019_BASE (RBTX4927_ETHER_ADDR - mips_io_port_base)
+#define RBTX4927_RTL_8019_IRQ  (TXX9_IRQ_BASE + TX4927_IR_INT(3))
+
+void rbtx4927_prom_init(void);
+void rbtx4927_irq_setup(void);
+struct pci_dev;
+int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_RBTX4927_H */
diff --git a/arch/mips/include/asm/txx9/rbtx4938.h b/arch/mips/include/asm/txx9/rbtx4938.h
new file mode 100644
index 0000000..9f0441a
--- /dev/null
+++ b/arch/mips/include/asm/txx9/rbtx4938.h
@@ -0,0 +1,145 @@
+/*
+ * Definitions for TX4937/TX4938
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TXX9_RBTX4938_H
+#define __ASM_TXX9_RBTX4938_H
+
+#include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx4938.h>
+
+/* Address map */
+#define RBTX4938_FPGA_REG_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000000)
+#define RBTX4938_FPGA_REV_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000002)
+#define RBTX4938_CONFIG1_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000004)
+#define RBTX4938_CONFIG2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000006)
+#define RBTX4938_CONFIG3_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000008)
+#define RBTX4938_LED_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001000)
+#define RBTX4938_DIPSW_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001002)
+#define RBTX4938_BDIPSW_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001004)
+#define RBTX4938_IMASK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002000)
+#define RBTX4938_IMASK2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002002)
+#define RBTX4938_INTPOL_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002004)
+#define RBTX4938_ISTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002006)
+#define RBTX4938_ISTAT2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002008)
+#define RBTX4938_IMSTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000200a)
+#define RBTX4938_IMSTAT2_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000200c)
+#define RBTX4938_SOFTINT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00003000)
+#define RBTX4938_PIOSEL_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005000)
+#define RBTX4938_SPICS_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005002)
+#define RBTX4938_SFPWR_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005008)
+#define RBTX4938_SFVOL_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000500a)
+#define RBTX4938_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007000)
+#define RBTX4938_SOFTRESETLOCK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007002)
+#define RBTX4938_PCIRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007004)
+#define RBTX4938_ETHER_BASE	(IO_BASE + TXX9_CE(2) + 0x00020000)
+
+/* Ethernet port address (Jumperless Mode (W12:Open)) */
+#define RBTX4938_ETHER_ADDR	(RBTX4938_ETHER_BASE + 0x280)
+
+/* bits for ISTAT/IMASK/IMSTAT */
+#define RBTX4938_INTB_PCID	0
+#define RBTX4938_INTB_PCIC	1
+#define RBTX4938_INTB_PCIB	2
+#define RBTX4938_INTB_PCIA	3
+#define RBTX4938_INTB_RTC	4
+#define RBTX4938_INTB_ATA	5
+#define RBTX4938_INTB_MODEM	6
+#define RBTX4938_INTB_SWINT	7
+#define RBTX4938_INTF_PCID	(1 << RBTX4938_INTB_PCID)
+#define RBTX4938_INTF_PCIC	(1 << RBTX4938_INTB_PCIC)
+#define RBTX4938_INTF_PCIB	(1 << RBTX4938_INTB_PCIB)
+#define RBTX4938_INTF_PCIA	(1 << RBTX4938_INTB_PCIA)
+#define RBTX4938_INTF_RTC	(1 << RBTX4938_INTB_RTC)
+#define RBTX4938_INTF_ATA	(1 << RBTX4938_INTB_ATA)
+#define RBTX4938_INTF_MODEM	(1 << RBTX4938_INTB_MODEM)
+#define RBTX4938_INTF_SWINT	(1 << RBTX4938_INTB_SWINT)
+
+#define rbtx4938_fpga_rev_addr	((__u8 __iomem *)RBTX4938_FPGA_REV_ADDR)
+#define rbtx4938_led_addr	((__u8 __iomem *)RBTX4938_LED_ADDR)
+#define rbtx4938_dipsw_addr	((__u8 __iomem *)RBTX4938_DIPSW_ADDR)
+#define rbtx4938_bdipsw_addr	((__u8 __iomem *)RBTX4938_BDIPSW_ADDR)
+#define rbtx4938_imask_addr	((__u8 __iomem *)RBTX4938_IMASK_ADDR)
+#define rbtx4938_imask2_addr	((__u8 __iomem *)RBTX4938_IMASK2_ADDR)
+#define rbtx4938_intpol_addr	((__u8 __iomem *)RBTX4938_INTPOL_ADDR)
+#define rbtx4938_istat_addr	((__u8 __iomem *)RBTX4938_ISTAT_ADDR)
+#define rbtx4938_istat2_addr	((__u8 __iomem *)RBTX4938_ISTAT2_ADDR)
+#define rbtx4938_imstat_addr	((__u8 __iomem *)RBTX4938_IMSTAT_ADDR)
+#define rbtx4938_imstat2_addr	((__u8 __iomem *)RBTX4938_IMSTAT2_ADDR)
+#define rbtx4938_softint_addr	((__u8 __iomem *)RBTX4938_SOFTINT_ADDR)
+#define rbtx4938_piosel_addr	((__u8 __iomem *)RBTX4938_PIOSEL_ADDR)
+#define rbtx4938_spics_addr	((__u8 __iomem *)RBTX4938_SPICS_ADDR)
+#define rbtx4938_sfpwr_addr	((__u8 __iomem *)RBTX4938_SFPWR_ADDR)
+#define rbtx4938_sfvol_addr	((__u8 __iomem *)RBTX4938_SFVOL_ADDR)
+#define rbtx4938_softreset_addr	((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR)
+#define rbtx4938_softresetlock_addr	\
+				((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR)
+#define rbtx4938_pcireset_addr	((__u8 __iomem *)RBTX4938_PCIRESET_ADDR)
+
+/*
+ * IRQ mappings
+ */
+
+#define RBTX4938_SOFT_INT0	0	/* not used */
+#define RBTX4938_SOFT_INT1	1	/* not used */
+#define RBTX4938_IRC_INT	2
+#define RBTX4938_TIMER_INT	7
+
+/* These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an RBTX4938 machine.  Add new 'spaces' as new
+ * IRQ hardware is supported.
+ */
+#define RBTX4938_NR_IRQ_IOC	8
+
+#define RBTX4938_IRQ_IRC	TXX9_IRQ_BASE
+#define RBTX4938_IRQ_IOC	(TXX9_IRQ_BASE + TX4938_NUM_IR)
+#define RBTX4938_IRQ_END	(RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC)
+
+#define RBTX4938_IRQ_IRC_ECCERR	(RBTX4938_IRQ_IRC + TX4938_IR_ECCERR)
+#define RBTX4938_IRQ_IRC_WTOERR	(RBTX4938_IRQ_IRC + TX4938_IR_WTOERR)
+#define RBTX4938_IRQ_IRC_INT(n)	(RBTX4938_IRQ_IRC + TX4938_IR_INT(n))
+#define RBTX4938_IRQ_IRC_SIO(n)	(RBTX4938_IRQ_IRC + TX4938_IR_SIO(n))
+#define RBTX4938_IRQ_IRC_DMA(ch, n)	(RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n))
+#define RBTX4938_IRQ_IRC_PIO	(RBTX4938_IRQ_IRC + TX4938_IR_PIO)
+#define RBTX4938_IRQ_IRC_PDMAC	(RBTX4938_IRQ_IRC + TX4938_IR_PDMAC)
+#define RBTX4938_IRQ_IRC_PCIC	(RBTX4938_IRQ_IRC + TX4938_IR_PCIC)
+#define RBTX4938_IRQ_IRC_TMR(n)	(RBTX4938_IRQ_IRC + TX4938_IR_TMR(n))
+#define RBTX4938_IRQ_IRC_NDFMC	(RBTX4938_IRQ_IRC + TX4938_IR_NDFMC)
+#define RBTX4938_IRQ_IRC_PCIERR	(RBTX4938_IRQ_IRC + TX4938_IR_PCIERR)
+#define RBTX4938_IRQ_IRC_PCIPME	(RBTX4938_IRQ_IRC + TX4938_IR_PCIPME)
+#define RBTX4938_IRQ_IRC_ACLC	(RBTX4938_IRQ_IRC + TX4938_IR_ACLC)
+#define RBTX4938_IRQ_IRC_ACLCPME	(RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME)
+#define RBTX4938_IRQ_IRC_PCIC1	(RBTX4938_IRQ_IRC + TX4938_IR_PCIC1)
+#define RBTX4938_IRQ_IRC_SPI	(RBTX4938_IRQ_IRC + TX4938_IR_SPI)
+#define RBTX4938_IRQ_IOC_PCID	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID)
+#define RBTX4938_IRQ_IOC_PCIC	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC)
+#define RBTX4938_IRQ_IOC_PCIB	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB)
+#define RBTX4938_IRQ_IOC_PCIA	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA)
+#define RBTX4938_IRQ_IOC_RTC	(RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC)
+#define RBTX4938_IRQ_IOC_ATA	(RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA)
+#define RBTX4938_IRQ_IOC_MODEM	(RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM)
+#define RBTX4938_IRQ_IOC_SWINT	(RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT)
+
+
+/* IOC (PCI, etc) */
+#define RBTX4938_IRQ_IOCINT	(TXX9_IRQ_BASE + TX4938_IR_INT(0))
+/* Onboard 10M Ether */
+#define RBTX4938_IRQ_ETHER	(TXX9_IRQ_BASE + TX4938_IR_INT(1))
+
+#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base)
+#define RBTX4938_RTL_8019_IRQ  (RBTX4938_IRQ_ETHER)
+
+void rbtx4938_prom_init(void);
+void rbtx4938_irq_setup(void);
+struct pci_dev;
+int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_RBTX4938_H */
diff --git a/arch/mips/include/asm/txx9/rbtx4939.h b/arch/mips/include/asm/txx9/rbtx4939.h
new file mode 100644
index 0000000..1acf428
--- /dev/null
+++ b/arch/mips/include/asm/txx9/rbtx4939.h
@@ -0,0 +1,133 @@
+/*
+ * Definitions for RBTX4939
+ *
+ * (C) Copyright TOSHIBA CORPORATION 2005-2006
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_TXX9_RBTX4939_H
+#define __ASM_TXX9_RBTX4939_H
+
+#include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4939.h>
+
+/* Address map */
+#define RBTX4939_IOC_REG_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000000)
+#define RBTX4939_BOARD_REV_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000000)
+#define RBTX4939_IOC_REV_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000002)
+#define RBTX4939_CONFIG1_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000004)
+#define RBTX4939_CONFIG2_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000006)
+#define RBTX4939_CONFIG3_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000008)
+#define RBTX4939_CONFIG4_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000000a)
+#define RBTX4939_USTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00001000)
+#define RBTX4939_UDIPSW_ADDR	(IO_BASE + TXX9_CE(1) + 0x00001002)
+#define RBTX4939_BDIPSW_ADDR	(IO_BASE + TXX9_CE(1) + 0x00001004)
+#define RBTX4939_IEN_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002000)
+#define RBTX4939_IPOL_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002002)
+#define RBTX4939_IFAC1_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002004)
+#define RBTX4939_IFAC2_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002006)
+#define RBTX4939_SOFTINT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00003000)
+#define RBTX4939_ISASTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004000)
+#define RBTX4939_PCISTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004002)
+#define RBTX4939_ROME_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004004)
+#define RBTX4939_SPICS_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004006)
+#define RBTX4939_AUDI_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004008)
+#define RBTX4939_ISAGPIO_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000400a)
+#define RBTX4939_PE1_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005000)
+#define RBTX4939_PE2_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005002)
+#define RBTX4939_PE3_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005004)
+#define RBTX4939_VP_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005006)
+#define RBTX4939_VPRESET_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005008)
+#define RBTX4939_VPSOUT_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000500a)
+#define RBTX4939_VPSIN_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000500c)
+#define RBTX4939_7SEG_ADDR(s, ch)	\
+	(IO_BASE + TXX9_CE(1) + 0x00006000 + (s) * 16 + ((ch) & 3) * 2)
+#define RBTX4939_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(1) + 0x00007000)
+#define RBTX4939_RESETEN_ADDR	(IO_BASE + TXX9_CE(1) + 0x00007002)
+#define RBTX4939_RESETSTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00007004)
+#define RBTX4939_ETHER_BASE	(IO_BASE + TXX9_CE(1) + 0x00020000)
+
+/* Ethernet port address */
+#define RBTX4939_ETHER_ADDR	(RBTX4939_ETHER_BASE + 0x300)
+
+/* bits for IEN/IPOL/IFAC */
+#define RBTX4938_INTB_ISA0	0
+#define RBTX4938_INTB_ISA11	1
+#define RBTX4938_INTB_ISA12	2
+#define RBTX4938_INTB_ISA15	3
+#define RBTX4938_INTB_I2S	4
+#define RBTX4938_INTB_SW	5
+#define RBTX4938_INTF_ISA0	(1 << RBTX4938_INTB_ISA0)
+#define RBTX4938_INTF_ISA11	(1 << RBTX4938_INTB_ISA11)
+#define RBTX4938_INTF_ISA12	(1 << RBTX4938_INTB_ISA12)
+#define RBTX4938_INTF_ISA15	(1 << RBTX4938_INTB_ISA15)
+#define RBTX4938_INTF_I2S	(1 << RBTX4938_INTB_I2S)
+#define RBTX4938_INTF_SW	(1 << RBTX4938_INTB_SW)
+
+/* bits for PE1,PE2,PE3 */
+#define RBTX4939_PE1_ATA(ch)	(0x01 << (ch))
+#define RBTX4939_PE1_RMII(ch)	(0x04 << (ch))
+#define RBTX4939_PE2_SIO0	0x01
+#define RBTX4939_PE2_SIO2	0x02
+#define RBTX4939_PE2_SIO3	0x04
+#define RBTX4939_PE2_CIR	0x08
+#define RBTX4939_PE2_SPI	0x10
+#define RBTX4939_PE2_GPIO	0x20
+#define RBTX4939_PE3_VP	0x01
+#define RBTX4939_PE3_VP_P	0x02
+#define RBTX4939_PE3_VP_S	0x04
+
+#define rbtx4939_board_rev_addr	((u8 __iomem *)RBTX4939_BOARD_REV_ADDR)
+#define rbtx4939_ioc_rev_addr	((u8 __iomem *)RBTX4939_IOC_REV_ADDR)
+#define rbtx4939_config1_addr	((u8 __iomem *)RBTX4939_CONFIG1_ADDR)
+#define rbtx4939_config2_addr	((u8 __iomem *)RBTX4939_CONFIG2_ADDR)
+#define rbtx4939_config3_addr	((u8 __iomem *)RBTX4939_CONFIG3_ADDR)
+#define rbtx4939_config4_addr	((u8 __iomem *)RBTX4939_CONFIG4_ADDR)
+#define rbtx4939_ustat_addr	((u8 __iomem *)RBTX4939_USTAT_ADDR)
+#define rbtx4939_udipsw_addr	((u8 __iomem *)RBTX4939_UDIPSW_ADDR)
+#define rbtx4939_bdipsw_addr	((u8 __iomem *)RBTX4939_BDIPSW_ADDR)
+#define rbtx4939_ien_addr	((u8 __iomem *)RBTX4939_IEN_ADDR)
+#define rbtx4939_ipol_addr	((u8 __iomem *)RBTX4939_IPOL_ADDR)
+#define rbtx4939_ifac1_addr	((u8 __iomem *)RBTX4939_IFAC1_ADDR)
+#define rbtx4939_ifac2_addr	((u8 __iomem *)RBTX4939_IFAC2_ADDR)
+#define rbtx4939_softint_addr	((u8 __iomem *)RBTX4939_SOFTINT_ADDR)
+#define rbtx4939_isastat_addr	((u8 __iomem *)RBTX4939_ISASTAT_ADDR)
+#define rbtx4939_pcistat_addr	((u8 __iomem *)RBTX4939_PCISTAT_ADDR)
+#define rbtx4939_rome_addr	((u8 __iomem *)RBTX4939_ROME_ADDR)
+#define rbtx4939_spics_addr	((u8 __iomem *)RBTX4939_SPICS_ADDR)
+#define rbtx4939_audi_addr	((u8 __iomem *)RBTX4939_AUDI_ADDR)
+#define rbtx4939_isagpio_addr	((u8 __iomem *)RBTX4939_ISAGPIO_ADDR)
+#define rbtx4939_pe1_addr	((u8 __iomem *)RBTX4939_PE1_ADDR)
+#define rbtx4939_pe2_addr	((u8 __iomem *)RBTX4939_PE2_ADDR)
+#define rbtx4939_pe3_addr	((u8 __iomem *)RBTX4939_PE3_ADDR)
+#define rbtx4939_vp_addr	((u8 __iomem *)RBTX4939_VP_ADDR)
+#define rbtx4939_vpreset_addr	((u8 __iomem *)RBTX4939_VPRESET_ADDR)
+#define rbtx4939_vpsout_addr	((u8 __iomem *)RBTX4939_VPSOUT_ADDR)
+#define rbtx4939_vpsin_addr	((u8 __iomem *)RBTX4939_VPSIN_ADDR)
+#define rbtx4939_7seg_addr(s, ch) \
+				((u8 __iomem *)RBTX4939_7SEG_ADDR(s, ch))
+#define rbtx4939_softreset_addr	((u8 __iomem *)RBTX4939_SOFTRESET_ADDR)
+#define rbtx4939_reseten_addr	((u8 __iomem *)RBTX4939_RESETEN_ADDR)
+#define rbtx4939_resetstat_addr	((u8 __iomem *)RBTX4939_RESETSTAT_ADDR)
+
+/*
+ * IRQ mappings
+ */
+#define RBTX4939_NR_IRQ_IOC	8
+
+#define RBTX4939_IRQ_IOC	(TXX9_IRQ_BASE + TX4939_NUM_IR)
+#define RBTX4939_IRQ_END	(RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC)
+
+/* IOC (ISA, etc) */
+#define RBTX4939_IRQ_IOCINT	(TXX9_IRQ_BASE + TX4939_IR_INT(0))
+/* Onboard 10M Ether */
+#define RBTX4939_IRQ_ETHER	(TXX9_IRQ_BASE + TX4939_IR_INT(1))
+
+void rbtx4939_prom_init(void);
+void rbtx4939_irq_setup(void);
+
+#endif /* __ASM_TXX9_RBTX4939_H */
diff --git a/arch/mips/include/asm/txx9/smsc_fdc37m81x.h b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h
new file mode 100644
index 0000000..d1d6332
--- /dev/null
+++ b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h
@@ -0,0 +1,68 @@
+/*
+ * Interface for smsc fdc48m81x Super IO chip
+ *
+ * Author: MontaVista Software, Inc. source@mvista.com
+ *
+ * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Manish Lachwani, mlachwani@mvista.com
+ */
+
+#ifndef _SMSC_FDC37M81X_H_
+#define _SMSC_FDC37M81X_H_
+
+/* Common Registers */
+#define SMSC_FDC37M81X_CONFIG_INDEX  0x00
+#define SMSC_FDC37M81X_CONFIG_DATA   0x01
+#define SMSC_FDC37M81X_CONF          0x02
+#define SMSC_FDC37M81X_INDEX         0x03
+#define SMSC_FDC37M81X_DNUM          0x07
+#define SMSC_FDC37M81X_DID           0x20
+#define SMSC_FDC37M81X_DREV          0x21
+#define SMSC_FDC37M81X_PCNT          0x22
+#define SMSC_FDC37M81X_PMGT          0x23
+#define SMSC_FDC37M81X_OSC           0x24
+#define SMSC_FDC37M81X_CONFPA0       0x26
+#define SMSC_FDC37M81X_CONFPA1       0x27
+#define SMSC_FDC37M81X_TEST4         0x2B
+#define SMSC_FDC37M81X_TEST5         0x2C
+#define SMSC_FDC37M81X_TEST1         0x2D
+#define SMSC_FDC37M81X_TEST2         0x2E
+#define SMSC_FDC37M81X_TEST3         0x2F
+
+/* Logical device numbers */
+#define SMSC_FDC37M81X_FDD           0x00
+#define SMSC_FDC37M81X_PARALLEL      0x03
+#define SMSC_FDC37M81X_SERIAL1       0x04
+#define SMSC_FDC37M81X_SERIAL2       0x05
+#define SMSC_FDC37M81X_KBD           0x07
+#define SMSC_FDC37M81X_AUXIO         0x08
+#define SMSC_FDC37M81X_NONE          0xff
+
+/* Logical device Config Registers */
+#define SMSC_FDC37M81X_ACTIVE        0x30
+#define SMSC_FDC37M81X_BASEADDR0     0x60
+#define SMSC_FDC37M81X_BASEADDR1     0x61
+#define SMSC_FDC37M81X_INT           0x70
+#define SMSC_FDC37M81X_INT2          0x72
+#define SMSC_FDC37M81X_LDCR_F0       0xF0
+
+/* Chip Config Values */
+#define SMSC_FDC37M81X_CONFIG_ENTER  0x55
+#define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
+#define SMSC_FDC37M81X_CHIP_ID       0x4d
+
+unsigned long smsc_fdc37m81x_init(unsigned long port);
+
+void smsc_fdc37m81x_config_beg(void);
+
+void smsc_fdc37m81x_config_end(void);
+
+u8 smsc_fdc37m81x_config_get(u8 reg);
+void smsc_fdc37m81x_config_set(u8 reg, u8 val);
+
+#endif
diff --git a/arch/mips/include/asm/txx9/spi.h b/arch/mips/include/asm/txx9/spi.h
new file mode 100644
index 0000000..0d727f3
--- /dev/null
+++ b/arch/mips/include/asm/txx9/spi.h
@@ -0,0 +1,34 @@
+/*
+ * Definitions for TX4937/TX4938 SPI
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TXX9_SPI_H
+#define __ASM_TXX9_SPI_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_SPI
+int spi_eeprom_register(int busid, int chipid, int size);
+int spi_eeprom_read(int busid, int chipid,
+		    int address, unsigned char *buf, int len);
+#else
+static inline int spi_eeprom_register(int busid, int chipid, int size)
+{
+	return -ENODEV;
+}
+static inline int spi_eeprom_read(int busid, int chipid,
+				  int address, unsigned char *buf, int len)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __ASM_TXX9_SPI_H */
diff --git a/arch/mips/include/asm/txx9/tx3927.h b/arch/mips/include/asm/txx9/tx3927.h
new file mode 100644
index 0000000..dc30c8d
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx3927.h
@@ -0,0 +1,341 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Toshiba Corporation
+ */
+#ifndef __ASM_TXX9_TX3927_H
+#define __ASM_TXX9_TX3927_H
+
+#define TX3927_REG_BASE	0xfffe0000UL
+#define TX3927_REG_SIZE	0x00010000
+#define TX3927_SDRAMC_REG	(TX3927_REG_BASE + 0x8000)
+#define TX3927_ROMC_REG		(TX3927_REG_BASE + 0x9000)
+#define TX3927_DMA_REG		(TX3927_REG_BASE + 0xb000)
+#define TX3927_IRC_REG		(TX3927_REG_BASE + 0xc000)
+#define TX3927_PCIC_REG		(TX3927_REG_BASE + 0xd000)
+#define TX3927_CCFG_REG		(TX3927_REG_BASE + 0xe000)
+#define TX3927_NR_TMR	3
+#define TX3927_TMR_REG(ch)	(TX3927_REG_BASE + 0xf000 + (ch) * 0x100)
+#define TX3927_NR_SIO	2
+#define TX3927_SIO_REG(ch)	(TX3927_REG_BASE + 0xf300 + (ch) * 0x100)
+#define TX3927_PIO_REG		(TX3927_REG_BASE + 0xf500)
+
+struct tx3927_sdramc_reg {
+	volatile unsigned long cr[8];
+	volatile unsigned long tr[3];
+	volatile unsigned long cmd;
+	volatile unsigned long smrs[2];
+};
+
+struct tx3927_romc_reg {
+	volatile unsigned long cr[8];
+};
+
+struct tx3927_dma_reg {
+	struct tx3927_dma_ch_reg {
+		volatile unsigned long cha;
+		volatile unsigned long sar;
+		volatile unsigned long dar;
+		volatile unsigned long cntr;
+		volatile unsigned long sair;
+		volatile unsigned long dair;
+		volatile unsigned long ccr;
+		volatile unsigned long csr;
+	} ch[4];
+	volatile unsigned long dbr[8];
+	volatile unsigned long tdhr;
+	volatile unsigned long mcr;
+	volatile unsigned long unused0;
+};
+
+#include <asm/byteorder.h>
+
+#ifdef __BIG_ENDIAN
+#define endian_def_s2(e1, e2)	\
+	volatile unsigned short e1, e2
+#define endian_def_sb2(e1, e2, e3)	\
+	volatile unsigned short e1;volatile unsigned char e2, e3
+#define endian_def_b2s(e1, e2, e3)	\
+	volatile unsigned char e1, e2;volatile unsigned short e3
+#define endian_def_b4(e1, e2, e3, e4)	\
+	volatile unsigned char e1, e2, e3, e4
+#else
+#define endian_def_s2(e1, e2)	\
+	volatile unsigned short e2, e1
+#define endian_def_sb2(e1, e2, e3)	\
+	volatile unsigned char e3, e2;volatile unsigned short e1
+#define endian_def_b2s(e1, e2, e3)	\
+	volatile unsigned short e3;volatile unsigned char e2, e1
+#define endian_def_b4(e1, e2, e3, e4)	\
+	volatile unsigned char e4, e3, e2, e1
+#endif
+
+struct tx3927_pcic_reg {
+	endian_def_s2(did, vid);
+	endian_def_s2(pcistat, pcicmd);
+	endian_def_b4(cc, scc, rpli, rid);
+	endian_def_b4(unused0, ht, mlt, cls);
+	volatile unsigned long ioba;		/* +10 */
+	volatile unsigned long mba;
+	volatile unsigned long unused1[5];
+	endian_def_s2(svid, ssvid);
+	volatile unsigned long unused2;		/* +30 */
+	endian_def_sb2(unused3, unused4, capptr);
+	volatile unsigned long unused5;
+	endian_def_b4(ml, mg, ip, il);
+	volatile unsigned long unused6;		/* +40 */
+	volatile unsigned long istat;
+	volatile unsigned long iim;
+	volatile unsigned long rrt;
+	volatile unsigned long unused7[3];		/* +50 */
+	volatile unsigned long ipbmma;
+	volatile unsigned long ipbioma;		/* +60 */
+	volatile unsigned long ilbmma;
+	volatile unsigned long ilbioma;
+	volatile unsigned long unused8[9];
+	volatile unsigned long tc;		/* +90 */
+	volatile unsigned long tstat;
+	volatile unsigned long tim;
+	volatile unsigned long tccmd;
+	volatile unsigned long pcirrt;		/* +a0 */
+	volatile unsigned long pcirrt_cmd;
+	volatile unsigned long pcirrdt;
+	volatile unsigned long unused9[3];
+	volatile unsigned long tlboap;
+	volatile unsigned long tlbiap;
+	volatile unsigned long tlbmma;		/* +c0 */
+	volatile unsigned long tlbioma;
+	volatile unsigned long sc_msg;
+	volatile unsigned long sc_be;
+	volatile unsigned long tbl;		/* +d0 */
+	volatile unsigned long unused10[3];
+	volatile unsigned long pwmng;		/* +e0 */
+	volatile unsigned long pwmngs;
+	volatile unsigned long unused11[6];
+	volatile unsigned long req_trace;		/* +100 */
+	volatile unsigned long pbapmc;
+	volatile unsigned long pbapms;
+	volatile unsigned long pbapmim;
+	volatile unsigned long bm;		/* +110 */
+	volatile unsigned long cpcibrs;
+	volatile unsigned long cpcibgs;
+	volatile unsigned long pbacs;
+	volatile unsigned long iobas;		/* +120 */
+	volatile unsigned long mbas;
+	volatile unsigned long lbc;
+	volatile unsigned long lbstat;
+	volatile unsigned long lbim;		/* +130 */
+	volatile unsigned long pcistatim;
+	volatile unsigned long ica;
+	volatile unsigned long icd;
+	volatile unsigned long iiadp;		/* +140 */
+	volatile unsigned long iscdp;
+	volatile unsigned long mmas;
+	volatile unsigned long iomas;
+	volatile unsigned long ipciaddr;		/* +150 */
+	volatile unsigned long ipcidata;
+	volatile unsigned long ipcibe;
+};
+
+struct tx3927_ccfg_reg {
+	volatile unsigned long ccfg;
+	volatile unsigned long crir;
+	volatile unsigned long pcfg;
+	volatile unsigned long tear;
+	volatile unsigned long pdcr;
+};
+
+/*
+ * SDRAMC
+ */
+
+/*
+ * ROMC
+ */
+
+/*
+ * DMA
+ */
+/* bits for MCR */
+#define TX3927_DMA_MCR_EIS(ch)	(0x10000000<<(ch))
+#define TX3927_DMA_MCR_DIS(ch)	(0x01000000<<(ch))
+#define TX3927_DMA_MCR_RSFIF	0x00000080
+#define TX3927_DMA_MCR_FIFUM(ch)	(0x00000008<<(ch))
+#define TX3927_DMA_MCR_LE	0x00000004
+#define TX3927_DMA_MCR_RPRT	0x00000002
+#define TX3927_DMA_MCR_MSTEN	0x00000001
+
+/* bits for CCRn */
+#define TX3927_DMA_CCR_DBINH	0x04000000
+#define TX3927_DMA_CCR_SBINH	0x02000000
+#define TX3927_DMA_CCR_CHRST	0x01000000
+#define TX3927_DMA_CCR_RVBYTE	0x00800000
+#define TX3927_DMA_CCR_ACKPOL	0x00400000
+#define TX3927_DMA_CCR_REQPL	0x00200000
+#define TX3927_DMA_CCR_EGREQ	0x00100000
+#define TX3927_DMA_CCR_CHDN	0x00080000
+#define TX3927_DMA_CCR_DNCTL	0x00060000
+#define TX3927_DMA_CCR_EXTRQ	0x00010000
+#define TX3927_DMA_CCR_INTRQD	0x0000e000
+#define TX3927_DMA_CCR_INTENE	0x00001000
+#define TX3927_DMA_CCR_INTENC	0x00000800
+#define TX3927_DMA_CCR_INTENT	0x00000400
+#define TX3927_DMA_CCR_CHNEN	0x00000200
+#define TX3927_DMA_CCR_XFACT	0x00000100
+#define TX3927_DMA_CCR_SNOP	0x00000080
+#define TX3927_DMA_CCR_DSTINC	0x00000040
+#define TX3927_DMA_CCR_SRCINC	0x00000020
+#define TX3927_DMA_CCR_XFSZ(order)	(((order) << 2) & 0x0000001c)
+#define TX3927_DMA_CCR_XFSZ_1W	TX3927_DMA_CCR_XFSZ(2)
+#define TX3927_DMA_CCR_XFSZ_4W	TX3927_DMA_CCR_XFSZ(4)
+#define TX3927_DMA_CCR_XFSZ_8W	TX3927_DMA_CCR_XFSZ(5)
+#define TX3927_DMA_CCR_XFSZ_16W	TX3927_DMA_CCR_XFSZ(6)
+#define TX3927_DMA_CCR_XFSZ_32W	TX3927_DMA_CCR_XFSZ(7)
+#define TX3927_DMA_CCR_MEMIO	0x00000002
+#define TX3927_DMA_CCR_ONEAD	0x00000001
+
+/* bits for CSRn */
+#define TX3927_DMA_CSR_CHNACT	0x00000100
+#define TX3927_DMA_CSR_ABCHC	0x00000080
+#define TX3927_DMA_CSR_NCHNC	0x00000040
+#define TX3927_DMA_CSR_NTRNFC	0x00000020
+#define TX3927_DMA_CSR_EXTDN	0x00000010
+#define TX3927_DMA_CSR_CFERR	0x00000008
+#define TX3927_DMA_CSR_CHERR	0x00000004
+#define TX3927_DMA_CSR_DESERR	0x00000002
+#define TX3927_DMA_CSR_SORERR	0x00000001
+
+/*
+ * IRC
+ */
+#define TX3927_IR_INT0	0
+#define TX3927_IR_INT1	1
+#define TX3927_IR_INT2	2
+#define TX3927_IR_INT3	3
+#define TX3927_IR_INT4	4
+#define TX3927_IR_INT5	5
+#define TX3927_IR_SIO0	6
+#define TX3927_IR_SIO1	7
+#define TX3927_IR_SIO(ch)	(6 + (ch))
+#define TX3927_IR_DMA	8
+#define TX3927_IR_PIO	9
+#define TX3927_IR_PCI	10
+#define TX3927_IR_TMR(ch)	(13 + (ch))
+#define TX3927_NUM_IR	16
+
+/*
+ * PCIC
+ */
+/* bits for PCICMD */
+/* see PCI_COMMAND_XXX in linux/pci.h */
+
+/* bits for PCISTAT */
+/* see PCI_STATUS_XXX in linux/pci.h */
+#define PCI_STATUS_NEW_CAP	0x0010
+
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL	0x00001600
+
+/* bits for TC */
+#define TX3927_PCIC_TC_OF16E	0x00000020
+#define TX3927_PCIC_TC_IF8E	0x00000010
+#define TX3927_PCIC_TC_OF8E	0x00000008
+
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL	0x0003ffff
+
+/* bits for IOBA/MBA */
+/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
+
+/* bits for PBAPMC */
+#define TX3927_PCIC_PBAPMC_RPBA	0x00000004
+#define TX3927_PCIC_PBAPMC_PBAEN	0x00000002
+#define TX3927_PCIC_PBAPMC_BMCEN	0x00000001
+
+/* bits for LBSTAT/LBIM */
+#define TX3927_PCIC_LBIM_ALL	0x0000003e
+
+/* bits for PCISTATIM (see also PCI_STATUS_XXX in linux/pci.h */
+#define TX3927_PCIC_PCISTATIM_ALL	0x0000f900
+
+/* bits for LBC */
+#define TX3927_PCIC_LBC_IBSE	0x00004000
+#define TX3927_PCIC_LBC_TIBSE	0x00002000
+#define TX3927_PCIC_LBC_TMFBSE	0x00001000
+#define TX3927_PCIC_LBC_HRST	0x00000800
+#define TX3927_PCIC_LBC_SRST	0x00000400
+#define TX3927_PCIC_LBC_EPCAD	0x00000200
+#define TX3927_PCIC_LBC_MSDSE	0x00000100
+#define TX3927_PCIC_LBC_CRR	0x00000080
+#define TX3927_PCIC_LBC_ILMDE	0x00000040
+#define TX3927_PCIC_LBC_ILIDE	0x00000020
+
+#define TX3927_PCIC_IDSEL_AD_TO_SLOT(ad)	((ad) - 11)
+#define TX3927_PCIC_MAX_DEVNU	TX3927_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX3927_CCFG_TLBOFF	0x00020000
+#define TX3927_CCFG_BEOW	0x00010000
+#define TX3927_CCFG_WR	0x00008000
+#define TX3927_CCFG_TOE	0x00004000
+#define TX3927_CCFG_PCIXARB	0x00002000
+#define TX3927_CCFG_PCI3	0x00001000
+#define TX3927_CCFG_PSNP	0x00000800
+#define TX3927_CCFG_PPRI	0x00000400
+#define TX3927_CCFG_PLLM	0x00000030
+#define TX3927_CCFG_ENDIAN	0x00000004
+#define TX3927_CCFG_HALT	0x00000002
+#define TX3927_CCFG_ACEHOLD	0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX3927_PCFG_SYSCLKEN	0x08000000
+#define TX3927_PCFG_SDRCLKEN_ALL	0x07c00000
+#define TX3927_PCFG_SDRCLKEN(ch)	(0x00400000<<(ch))
+#define TX3927_PCFG_PCICLKEN_ALL	0x003c0000
+#define TX3927_PCFG_PCICLKEN(ch)	(0x00040000<<(ch))
+#define TX3927_PCFG_SELALL	0x0003ffff
+#define TX3927_PCFG_SELCS	0x00020000
+#define TX3927_PCFG_SELDSF	0x00010000
+#define TX3927_PCFG_SELSIOC_ALL	0x0000c000
+#define TX3927_PCFG_SELSIOC(ch)	(0x00004000<<(ch))
+#define TX3927_PCFG_SELSIO_ALL	0x00003000
+#define TX3927_PCFG_SELSIO(ch)	(0x00001000<<(ch))
+#define TX3927_PCFG_SELTMR_ALL	0x00000e00
+#define TX3927_PCFG_SELTMR(ch)	(0x00000200<<(ch))
+#define TX3927_PCFG_SELDONE	0x00000100
+#define TX3927_PCFG_INTDMA_ALL	0x000000f0
+#define TX3927_PCFG_INTDMA(ch)	(0x00000010<<(ch))
+#define TX3927_PCFG_SELDMA_ALL	0x0000000f
+#define TX3927_PCFG_SELDMA(ch)	(0x00000001<<(ch))
+
+#define tx3927_sdramcptr	((struct tx3927_sdramc_reg *)TX3927_SDRAMC_REG)
+#define tx3927_romcptr		((struct tx3927_romc_reg *)TX3927_ROMC_REG)
+#define tx3927_dmaptr		((struct tx3927_dma_reg *)TX3927_DMA_REG)
+#define tx3927_pcicptr		((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
+#define tx3927_ccfgptr		((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
+#define tx3927_sioptr(ch)	((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
+#define tx3927_pioptr		((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
+
+#define TX3927_REV_PCODE()	(tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch)	(tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch)	\
+	(0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+#define TX3927_ROMC_WIDTH(ch)	(32 >> ((tx3927_romcptr->cr[(ch)] >> 7) & 0x1))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
+struct pci_controller;
+void tx3927_pcic_setup(struct pci_controller *channel,
+		       unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
+void tx3927_mtd_init(int ch);
+
+#endif /* __ASM_TXX9_TX3927_H */
diff --git a/arch/mips/include/asm/txx9/tx4927.h b/arch/mips/include/asm/txx9/tx4927.h
new file mode 100644
index 0000000..7d813f1
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4927.h
@@ -0,0 +1,269 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2006 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_TXX9_TX4927_H
+#define __ASM_TXX9_TX4927_H
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx4927pcic.h>
+
+#ifdef CONFIG_64BIT
+#define TX4927_REG_BASE	0xffffffffff1f0000UL
+#else
+#define TX4927_REG_BASE	0xff1f0000UL
+#endif
+#define TX4927_REG_SIZE	0x00010000
+
+#define TX4927_SDRAMC_REG	(TX4927_REG_BASE + 0x8000)
+#define TX4927_EBUSC_REG	(TX4927_REG_BASE + 0x9000)
+#define TX4927_PCIC_REG		(TX4927_REG_BASE + 0xd000)
+#define TX4927_CCFG_REG		(TX4927_REG_BASE + 0xe000)
+#define TX4927_IRC_REG		(TX4927_REG_BASE + 0xf600)
+#define TX4927_NR_TMR	3
+#define TX4927_TMR_REG(ch)	(TX4927_REG_BASE + 0xf000 + (ch) * 0x100)
+#define TX4927_NR_SIO	2
+#define TX4927_SIO_REG(ch)	(TX4927_REG_BASE + 0xf300 + (ch) * 0x100)
+#define TX4927_PIO_REG		(TX4927_REG_BASE + 0xf500)
+
+#define TX4927_IR_ECCERR	0
+#define TX4927_IR_WTOERR	1
+#define TX4927_NUM_IR_INT	6
+#define TX4927_IR_INT(n)	(2 + (n))
+#define TX4927_NUM_IR_SIO	2
+#define TX4927_IR_SIO(n)	(8 + (n))
+#define TX4927_NUM_IR_DMA	4
+#define TX4927_IR_DMA(n)	(10 + (n))
+#define TX4927_IR_PIO		14
+#define TX4927_IR_PDMAC		15
+#define TX4927_IR_PCIC		16
+#define TX4927_NUM_IR_TMR	3
+#define TX4927_IR_TMR(n)	(17 + (n))
+#define TX4927_IR_PCIERR	22
+#define TX4927_IR_PCIPME	23
+#define TX4927_IR_ACLC		24
+#define TX4927_IR_ACLCPME	25
+#define TX4927_NUM_IR	32
+
+#define TX4927_IRC_INT	2	/* IP[2] in Status register */
+
+#define TX4927_NUM_PIO	16
+
+struct tx4927_sdramc_reg {
+	u64 cr[4];
+	u64 unused0[4];
+	u64 tr;
+	u64 unused1[2];
+	u64 cmd;
+};
+
+struct tx4927_ebusc_reg {
+	u64 cr[8];
+};
+
+struct tx4927_ccfg_reg {
+	u64 ccfg;
+	u64 crir;
+	u64 pcfg;
+	u64 toea;
+	u64 clkctr;
+	u64 unused0;
+	u64 garbc;
+	u64 unused1;
+	u64 unused2;
+	u64 ramp;
+};
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4927_CCFG_WDRST	0x0000020000000000ULL
+#define TX4927_CCFG_WDREXEN	0x0000010000000000ULL
+#define TX4927_CCFG_BCFG_MASK	0x000000ff00000000ULL
+#define TX4927_CCFG_TINTDIS	0x01000000
+#define TX4927_CCFG_PCI66	0x00800000
+#define TX4927_CCFG_PCIMODE	0x00400000
+#define TX4927_CCFG_DIVMODE_MASK	0x000e0000
+#define TX4927_CCFG_DIVMODE_8	(0x0 << 17)
+#define TX4927_CCFG_DIVMODE_12	(0x1 << 17)
+#define TX4927_CCFG_DIVMODE_16	(0x2 << 17)
+#define TX4927_CCFG_DIVMODE_10	(0x3 << 17)
+#define TX4927_CCFG_DIVMODE_2	(0x4 << 17)
+#define TX4927_CCFG_DIVMODE_3	(0x5 << 17)
+#define TX4927_CCFG_DIVMODE_4	(0x6 << 17)
+#define TX4927_CCFG_DIVMODE_2_5	(0x7 << 17)
+#define TX4927_CCFG_BEOW	0x00010000
+#define TX4927_CCFG_WR	0x00008000
+#define TX4927_CCFG_TOE	0x00004000
+#define TX4927_CCFG_PCIARB	0x00002000
+#define TX4927_CCFG_PCIDIVMODE_MASK	0x00001800
+#define TX4927_CCFG_PCIDIVMODE_2_5	0x00000000
+#define TX4927_CCFG_PCIDIVMODE_3	0x00000800
+#define TX4927_CCFG_PCIDIVMODE_5	0x00001000
+#define TX4927_CCFG_PCIDIVMODE_6	0x00001800
+#define TX4927_CCFG_SYSSP_MASK	0x000000c0
+#define TX4927_CCFG_ENDIAN	0x00000004
+#define TX4927_CCFG_HALT	0x00000002
+#define TX4927_CCFG_ACEHOLD	0x00000001
+#define TX4927_CCFG_W1CBITS	(TX4927_CCFG_WDRST | TX4927_CCFG_BEOW)
+
+/* PCFG : Pin Configuration */
+#define TX4927_PCFG_SDCLKDLY_MASK	0x30000000
+#define TX4927_PCFG_SDCLKDLY(d)	((d)<<28)
+#define TX4927_PCFG_SYSCLKEN	0x08000000
+#define TX4927_PCFG_SDCLKEN_ALL	0x07800000
+#define TX4927_PCFG_SDCLKEN(ch)	(0x00800000<<(ch))
+#define TX4927_PCFG_PCICLKEN_ALL	0x003f0000
+#define TX4927_PCFG_PCICLKEN(ch)	(0x00010000<<(ch))
+#define TX4927_PCFG_SEL2	0x00000200
+#define TX4927_PCFG_SEL1	0x00000100
+#define TX4927_PCFG_DMASEL_ALL	0x000000ff
+#define TX4927_PCFG_DMASEL0_MASK	0x00000003
+#define TX4927_PCFG_DMASEL1_MASK	0x0000000c
+#define TX4927_PCFG_DMASEL2_MASK	0x00000030
+#define TX4927_PCFG_DMASEL3_MASK	0x000000c0
+#define TX4927_PCFG_DMASEL0_DRQ0	0x00000000
+#define TX4927_PCFG_DMASEL0_SIO1	0x00000001
+#define TX4927_PCFG_DMASEL0_ACL0	0x00000002
+#define TX4927_PCFG_DMASEL0_ACL2	0x00000003
+#define TX4927_PCFG_DMASEL1_DRQ1	0x00000000
+#define TX4927_PCFG_DMASEL1_SIO1	0x00000004
+#define TX4927_PCFG_DMASEL1_ACL1	0x00000008
+#define TX4927_PCFG_DMASEL1_ACL3	0x0000000c
+#define TX4927_PCFG_DMASEL2_DRQ2	0x00000000	/* SEL2=0 */
+#define TX4927_PCFG_DMASEL2_SIO0	0x00000010	/* SEL2=0 */
+#define TX4927_PCFG_DMASEL2_ACL1	0x00000000	/* SEL2=1 */
+#define TX4927_PCFG_DMASEL2_ACL2	0x00000020	/* SEL2=1 */
+#define TX4927_PCFG_DMASEL2_ACL0	0x00000030	/* SEL2=1 */
+#define TX4927_PCFG_DMASEL3_DRQ3	0x00000000
+#define TX4927_PCFG_DMASEL3_SIO0	0x00000040
+#define TX4927_PCFG_DMASEL3_ACL3	0x00000080
+#define TX4927_PCFG_DMASEL3_ACL1	0x000000c0
+
+/* CLKCTR : Clock Control */
+#define TX4927_CLKCTR_ACLCKD	0x02000000
+#define TX4927_CLKCTR_PIOCKD	0x01000000
+#define TX4927_CLKCTR_DMACKD	0x00800000
+#define TX4927_CLKCTR_PCICKD	0x00400000
+#define TX4927_CLKCTR_TM0CKD	0x00100000
+#define TX4927_CLKCTR_TM1CKD	0x00080000
+#define TX4927_CLKCTR_TM2CKD	0x00040000
+#define TX4927_CLKCTR_SIO0CKD	0x00020000
+#define TX4927_CLKCTR_SIO1CKD	0x00010000
+#define TX4927_CLKCTR_ACLRST	0x00000200
+#define TX4927_CLKCTR_PIORST	0x00000100
+#define TX4927_CLKCTR_DMARST	0x00000080
+#define TX4927_CLKCTR_PCIRST	0x00000040
+#define TX4927_CLKCTR_TM0RST	0x00000010
+#define TX4927_CLKCTR_TM1RST	0x00000008
+#define TX4927_CLKCTR_TM2RST	0x00000004
+#define TX4927_CLKCTR_SIO0RST	0x00000002
+#define TX4927_CLKCTR_SIO1RST	0x00000001
+
+#define tx4927_sdramcptr \
+		((struct tx4927_sdramc_reg __iomem *)TX4927_SDRAMC_REG)
+#define tx4927_pcicptr \
+		((struct tx4927_pcic_reg __iomem *)TX4927_PCIC_REG)
+#define tx4927_ccfgptr \
+		((struct tx4927_ccfg_reg __iomem *)TX4927_CCFG_REG)
+#define tx4927_ebuscptr \
+		((struct tx4927_ebusc_reg __iomem *)TX4927_EBUSC_REG)
+#define tx4927_pioptr		((struct txx9_pio_reg __iomem *)TX4927_PIO_REG)
+
+#define TX4927_REV_PCODE()	\
+	((__u32)__raw_readq(&tx4927_ccfgptr->crir) >> 16)
+
+#define TX4927_SDRAMC_CR(ch)	__raw_readq(&tx4927_sdramcptr->cr[(ch)])
+#define TX4927_SDRAMC_BA(ch)	((TX4927_SDRAMC_CR(ch) >> 49) << 21)
+#define TX4927_SDRAMC_SIZE(ch)	\
+	((((TX4927_SDRAMC_CR(ch) >> 33) & 0x7fff) + 1) << 21)
+
+#define TX4927_EBUSC_CR(ch)	__raw_readq(&tx4927_ebuscptr->cr[(ch)])
+#define TX4927_EBUSC_BA(ch)	((TX4927_EBUSC_CR(ch) >> 48) << 20)
+#define TX4927_EBUSC_SIZE(ch)	\
+	(0x00100000 << ((unsigned long)(TX4927_EBUSC_CR(ch) >> 8) & 0xf))
+#define TX4927_EBUSC_WIDTH(ch)	\
+	(64 >> ((__u32)(TX4927_EBUSC_CR(ch) >> 20) & 0x3))
+
+/* utilities */
+static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits)
+{
+#ifdef CONFIG_32BIT
+	unsigned long flags;
+	local_irq_save(flags);
+#endif
+	____raw_writeq(____raw_readq(adr) & ~bits, adr);
+#ifdef CONFIG_32BIT
+	local_irq_restore(flags);
+#endif
+}
+static inline void txx9_set64(__u64 __iomem *adr, __u64 bits)
+{
+#ifdef CONFIG_32BIT
+	unsigned long flags;
+	local_irq_save(flags);
+#endif
+	____raw_writeq(____raw_readq(adr) | bits, adr);
+#ifdef CONFIG_32BIT
+	local_irq_restore(flags);
+#endif
+}
+
+/* These functions are not interrupt safe. */
+static inline void tx4927_ccfg_clear(__u64 bits)
+{
+	____raw_writeq(____raw_readq(&tx4927_ccfgptr->ccfg)
+		       & ~(TX4927_CCFG_W1CBITS | bits),
+		       &tx4927_ccfgptr->ccfg);
+}
+static inline void tx4927_ccfg_set(__u64 bits)
+{
+	____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg)
+			& ~TX4927_CCFG_W1CBITS) | bits,
+		       &tx4927_ccfgptr->ccfg);
+}
+static inline void tx4927_ccfg_change(__u64 change, __u64 new)
+{
+	____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg)
+			& ~(TX4927_CCFG_W1CBITS | change)) |
+		       new,
+		       &tx4927_ccfgptr->ccfg);
+}
+
+unsigned int tx4927_get_mem_size(void);
+void tx4927_wdt_init(void);
+void tx4927_setup(void);
+void tx4927_time_init(unsigned int tmrnr);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
+int tx4927_report_pciclk(void);
+int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
+void tx4927_irq_init(void);
+void tx4927_mtd_init(int ch);
+
+#endif /* __ASM_TXX9_TX4927_H */
diff --git a/arch/mips/include/asm/txx9/tx4927pcic.h b/arch/mips/include/asm/txx9/tx4927pcic.h
new file mode 100644
index 0000000..c470b8a
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4927pcic.h
@@ -0,0 +1,203 @@
+/*
+ * include/asm-mips/txx9/tx4927pcic.h
+ * TX4927 PCI controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_TX4927PCIC_H
+#define __ASM_TXX9_TX4927PCIC_H
+
+#include <linux/pci.h>
+#include <linux/irqreturn.h>
+
+struct tx4927_pcic_reg {
+	u32 pciid;
+	u32 pcistatus;
+	u32 pciccrev;
+	u32 pcicfg1;
+	u32 p2gm0plbase;		/* +10 */
+	u32 p2gm0pubase;
+	u32 p2gm1plbase;
+	u32 p2gm1pubase;
+	u32 p2gm2pbase;		/* +20 */
+	u32 p2giopbase;
+	u32 unused0;
+	u32 pcisid;
+	u32 unused1;		/* +30 */
+	u32 pcicapptr;
+	u32 unused2;
+	u32 pcicfg2;
+	u32 g2ptocnt;		/* +40 */
+	u32 unused3[15];
+	u32 g2pstatus;		/* +80 */
+	u32 g2pmask;
+	u32 pcisstatus;
+	u32 pcimask;
+	u32 p2gcfg;		/* +90 */
+	u32 p2gstatus;
+	u32 p2gmask;
+	u32 p2gccmd;
+	u32 unused4[24];		/* +a0 */
+	u32 pbareqport;		/* +100 */
+	u32 pbacfg;
+	u32 pbastatus;
+	u32 pbamask;
+	u32 pbabm;		/* +110 */
+	u32 pbacreq;
+	u32 pbacgnt;
+	u32 pbacstate;
+	u64 g2pmgbase[3];		/* +120 */
+	u64 g2piogbase;
+	u32 g2pmmask[3];		/* +140 */
+	u32 g2piomask;
+	u64 g2pmpbase[3];		/* +150 */
+	u64 g2piopbase;
+	u32 pciccfg;		/* +170 */
+	u32 pcicstatus;
+	u32 pcicmask;
+	u32 unused5;
+	u64 p2gmgbase[3];		/* +180 */
+	u64 p2giogbase;
+	u32 g2pcfgadrs;		/* +1a0 */
+	u32 g2pcfgdata;
+	u32 unused6[8];
+	u32 g2pintack;
+	u32 g2pspc;
+	u32 unused7[12];		/* +1d0 */
+	u64 pdmca;		/* +200 */
+	u64 pdmga;
+	u64 pdmpa;
+	u64 pdmctr;
+	u64 pdmcfg;		/* +220 */
+	u64 pdmsts;
+};
+
+/* bits for PCICMD */
+/* see PCI_COMMAND_XXX in linux/pci_regs.h */
+
+/* bits for PCISTAT */
+/* see PCI_STATUS_XXX in linux/pci_regs.h */
+
+/* bits for IOBA/MBA */
+/* see PCI_BASE_ADDRESS_XXX in linux/pci_regs.h */
+
+/* bits for G2PSTATUS/G2PMASK */
+#define TX4927_PCIC_G2PSTATUS_ALL	0x00000003
+#define TX4927_PCIC_G2PSTATUS_TTOE	0x00000002
+#define TX4927_PCIC_G2PSTATUS_RTOE	0x00000001
+
+/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci_regs.h */
+#define TX4927_PCIC_PCISTATUS_ALL	0x0000f900
+
+/* bits for PBACFG */
+#define TX4927_PCIC_PBACFG_FIXPA	0x00000008
+#define TX4927_PCIC_PBACFG_RPBA	0x00000004
+#define TX4927_PCIC_PBACFG_PBAEN	0x00000002
+#define TX4927_PCIC_PBACFG_BMCEN	0x00000001
+
+/* bits for PBASTATUS/PBAMASK */
+#define TX4927_PCIC_PBASTATUS_ALL	0x00000001
+#define TX4927_PCIC_PBASTATUS_BM	0x00000001
+
+/* bits for G2PMnGBASE */
+#define TX4927_PCIC_G2PMnGBASE_BSDIS	0x0000002000000000ULL
+#define TX4927_PCIC_G2PMnGBASE_ECHG	0x0000001000000000ULL
+
+/* bits for G2PIOGBASE */
+#define TX4927_PCIC_G2PIOGBASE_BSDIS	0x0000002000000000ULL
+#define TX4927_PCIC_G2PIOGBASE_ECHG	0x0000001000000000ULL
+
+/* bits for PCICSTATUS/PCICMASK */
+#define TX4927_PCIC_PCICSTATUS_ALL	0x000007b8
+#define TX4927_PCIC_PCICSTATUS_PME	0x00000400
+#define TX4927_PCIC_PCICSTATUS_TLB	0x00000200
+#define TX4927_PCIC_PCICSTATUS_NIB	0x00000100
+#define TX4927_PCIC_PCICSTATUS_ZIB	0x00000080
+#define TX4927_PCIC_PCICSTATUS_PERR	0x00000020
+#define TX4927_PCIC_PCICSTATUS_SERR	0x00000010
+#define TX4927_PCIC_PCICSTATUS_GBE	0x00000008
+#define TX4927_PCIC_PCICSTATUS_IWB	0x00000002
+#define TX4927_PCIC_PCICSTATUS_E2PDONE	0x00000001
+
+/* bits for PCICCFG */
+#define TX4927_PCIC_PCICCFG_GBWC_MASK	0x0fff0000
+#define TX4927_PCIC_PCICCFG_HRST	0x00000800
+#define TX4927_PCIC_PCICCFG_SRST	0x00000400
+#define TX4927_PCIC_PCICCFG_IRBER	0x00000200
+#define TX4927_PCIC_PCICCFG_G2PMEN(ch)	(0x00000100>>(ch))
+#define TX4927_PCIC_PCICCFG_G2PM0EN	0x00000100
+#define TX4927_PCIC_PCICCFG_G2PM1EN	0x00000080
+#define TX4927_PCIC_PCICCFG_G2PM2EN	0x00000040
+#define TX4927_PCIC_PCICCFG_G2PIOEN	0x00000020
+#define TX4927_PCIC_PCICCFG_TCAR	0x00000010
+#define TX4927_PCIC_PCICCFG_ICAEN	0x00000008
+
+/* bits for P2GMnGBASE */
+#define TX4927_PCIC_P2GMnGBASE_TMEMEN	0x0000004000000000ULL
+#define TX4927_PCIC_P2GMnGBASE_TBSDIS	0x0000002000000000ULL
+#define TX4927_PCIC_P2GMnGBASE_TECHG	0x0000001000000000ULL
+
+/* bits for P2GIOGBASE */
+#define TX4927_PCIC_P2GIOGBASE_TIOEN	0x0000004000000000ULL
+#define TX4927_PCIC_P2GIOGBASE_TBSDIS	0x0000002000000000ULL
+#define TX4927_PCIC_P2GIOGBASE_TECHG	0x0000001000000000ULL
+
+#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad)	((ad) - 11)
+#define TX4927_PCIC_MAX_DEVNU	TX4927_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/* bits for PDMCFG */
+#define TX4927_PCIC_PDMCFG_RSTFIFO	0x00200000
+#define TX4927_PCIC_PDMCFG_EXFER	0x00100000
+#define TX4927_PCIC_PDMCFG_REQDLY_MASK	0x00003800
+#define TX4927_PCIC_PDMCFG_REQDLY_NONE	(0 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_16	(1 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_32	(2 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_64	(3 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_128	(4 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_256	(5 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_512	(6 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_1024	(7 << 11)
+#define TX4927_PCIC_PDMCFG_ERRIE	0x00000400
+#define TX4927_PCIC_PDMCFG_NCCMPIE	0x00000200
+#define TX4927_PCIC_PDMCFG_NTCMPIE	0x00000100
+#define TX4927_PCIC_PDMCFG_CHNEN	0x00000080
+#define TX4927_PCIC_PDMCFG_XFRACT	0x00000040
+#define TX4927_PCIC_PDMCFG_BSWAP	0x00000020
+#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK	0x0000000c
+#define TX4927_PCIC_PDMCFG_XFRSIZE_1DW	0x00000000
+#define TX4927_PCIC_PDMCFG_XFRSIZE_1QW	0x00000004
+#define TX4927_PCIC_PDMCFG_XFRSIZE_4QW	0x00000008
+#define TX4927_PCIC_PDMCFG_XFRDIRC	0x00000002
+#define TX4927_PCIC_PDMCFG_CHRST	0x00000001
+
+/* bits for PDMSTS */
+#define TX4927_PCIC_PDMSTS_REQCNT_MASK	0x3f000000
+#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK	0x00f00000
+#define TX4927_PCIC_PDMSTS_FIFOWP_MASK	0x000c0000
+#define TX4927_PCIC_PDMSTS_FIFORP_MASK	0x00030000
+#define TX4927_PCIC_PDMSTS_ERRINT	0x00000800
+#define TX4927_PCIC_PDMSTS_DONEINT	0x00000400
+#define TX4927_PCIC_PDMSTS_CHNEN	0x00000200
+#define TX4927_PCIC_PDMSTS_XFRACT	0x00000100
+#define TX4927_PCIC_PDMSTS_ACCMP	0x00000080
+#define TX4927_PCIC_PDMSTS_NCCMP	0x00000040
+#define TX4927_PCIC_PDMSTS_NTCMP	0x00000020
+#define TX4927_PCIC_PDMSTS_CFGERR	0x00000008
+#define TX4927_PCIC_PDMSTS_PCIERR	0x00000004
+#define TX4927_PCIC_PDMSTS_CHNERR	0x00000002
+#define TX4927_PCIC_PDMSTS_DATAERR	0x00000001
+#define TX4927_PCIC_PDMSTS_ALL_CMP	0x000000e0
+#define TX4927_PCIC_PDMSTS_ALL_ERR	0x0000000f
+
+struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
+	struct pci_controller *channel);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+		       struct pci_controller *channel, int extarb);
+void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
+
+#endif /* __ASM_TXX9_TX4927PCIC_H */
diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h
new file mode 100644
index 0000000..0b06815
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4938.h
@@ -0,0 +1,308 @@
+/*
+ * Definitions for TX4937/TX4938
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TXX9_TX4938_H
+#define __ASM_TXX9_TX4938_H
+
+/* some controllers are compatible with 4927 */
+#include <asm/txx9/tx4927.h>
+
+#ifdef CONFIG_64BIT
+#define TX4938_REG_BASE	0xffffffffff1f0000UL /* == TX4937_REG_BASE */
+#else
+#define TX4938_REG_BASE	0xff1f0000UL /* == TX4937_REG_BASE */
+#endif
+#define TX4938_REG_SIZE	0x00010000 /* == TX4937_REG_SIZE */
+
+/* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */
+#define TX4938_NDFMC_REG	(TX4938_REG_BASE + 0x5000)
+#define TX4938_SRAMC_REG	(TX4938_REG_BASE + 0x6000)
+#define TX4938_PCIC1_REG	(TX4938_REG_BASE + 0x7000)
+#define TX4938_SDRAMC_REG	(TX4938_REG_BASE + 0x8000)
+#define TX4938_EBUSC_REG	(TX4938_REG_BASE + 0x9000)
+#define TX4938_DMA_REG(ch)	(TX4938_REG_BASE + 0xb000 + (ch) * 0x800)
+#define TX4938_PCIC_REG		(TX4938_REG_BASE + 0xd000)
+#define TX4938_CCFG_REG		(TX4938_REG_BASE + 0xe000)
+#define TX4938_NR_TMR	3
+#define TX4938_TMR_REG(ch)	((TX4938_REG_BASE + 0xf000) + (ch) * 0x100)
+#define TX4938_NR_SIO	2
+#define TX4938_SIO_REG(ch)	((TX4938_REG_BASE + 0xf300) + (ch) * 0x100)
+#define TX4938_PIO_REG		(TX4938_REG_BASE + 0xf500)
+#define TX4938_IRC_REG		(TX4938_REG_BASE + 0xf600)
+#define TX4938_ACLC_REG		(TX4938_REG_BASE + 0xf700)
+#define TX4938_SPI_REG		(TX4938_REG_BASE + 0xf800)
+
+struct tx4938_sramc_reg {
+	u64 cr;
+};
+
+struct tx4938_ccfg_reg {
+	u64 ccfg;
+	u64 crir;
+	u64 pcfg;
+	u64 toea;
+	u64 clkctr;
+	u64 unused0;
+	u64 garbc;
+	u64 unused1;
+	u64 unused2;
+	u64 ramp;
+	u64 unused3;
+	u64 jmpadr;
+};
+
+/*
+ * IRC
+ */
+
+#define TX4938_IR_ECCERR	0
+#define TX4938_IR_WTOERR	1
+#define TX4938_NUM_IR_INT	6
+#define TX4938_IR_INT(n)	(2 + (n))
+#define TX4938_NUM_IR_SIO	2
+#define TX4938_IR_SIO(n)	(8 + (n))
+#define TX4938_NUM_IR_DMA	4
+#define TX4938_IR_DMA(ch, n)	((ch ? 27 : 10) + (n)) /* 10-13, 27-30 */
+#define TX4938_IR_PIO	14
+#define TX4938_IR_PDMAC	15
+#define TX4938_IR_PCIC	16
+#define TX4938_NUM_IR_TMR	3
+#define TX4938_IR_TMR(n)	(17 + (n))
+#define TX4938_IR_NDFMC	21
+#define TX4938_IR_PCIERR	22
+#define TX4938_IR_PCIPME	23
+#define TX4938_IR_ACLC	24
+#define TX4938_IR_ACLCPME	25
+#define TX4938_IR_PCIC1	26
+#define TX4938_IR_SPI	31
+#define TX4938_NUM_IR	32
+/* multiplex */
+#define TX4938_IR_ETH0	TX4938_IR_INT(4)
+#define TX4938_IR_ETH1	TX4938_IR_INT(3)
+
+#define TX4938_IRC_INT	2	/* IP[2] in Status register */
+
+#define TX4938_NUM_PIO	16
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4938_CCFG_WDRST	0x0000020000000000ULL
+#define TX4938_CCFG_WDREXEN	0x0000010000000000ULL
+#define TX4938_CCFG_BCFG_MASK	0x000000ff00000000ULL
+#define TX4938_CCFG_TINTDIS	0x01000000
+#define TX4938_CCFG_PCI66	0x00800000
+#define TX4938_CCFG_PCIMODE	0x00400000
+#define TX4938_CCFG_PCI1_66	0x00200000
+#define TX4938_CCFG_DIVMODE_MASK	0x001e0000
+#define TX4938_CCFG_DIVMODE_2	(0x4 << 17)
+#define TX4938_CCFG_DIVMODE_2_5	(0xf << 17)
+#define TX4938_CCFG_DIVMODE_3	(0x5 << 17)
+#define TX4938_CCFG_DIVMODE_4	(0x6 << 17)
+#define TX4938_CCFG_DIVMODE_4_5	(0xd << 17)
+#define TX4938_CCFG_DIVMODE_8	(0x0 << 17)
+#define TX4938_CCFG_DIVMODE_10	(0xb << 17)
+#define TX4938_CCFG_DIVMODE_12	(0x1 << 17)
+#define TX4938_CCFG_DIVMODE_16	(0x2 << 17)
+#define TX4938_CCFG_DIVMODE_18	(0x9 << 17)
+#define TX4938_CCFG_BEOW	0x00010000
+#define TX4938_CCFG_WR	0x00008000
+#define TX4938_CCFG_TOE	0x00004000
+#define TX4938_CCFG_PCIARB	0x00002000
+#define TX4938_CCFG_PCIDIVMODE_MASK	0x00001c00
+#define TX4938_CCFG_PCIDIVMODE_4	(0x1 << 10)
+#define TX4938_CCFG_PCIDIVMODE_4_5	(0x3 << 10)
+#define TX4938_CCFG_PCIDIVMODE_5	(0x5 << 10)
+#define TX4938_CCFG_PCIDIVMODE_5_5	(0x7 << 10)
+#define TX4938_CCFG_PCIDIVMODE_8	(0x0 << 10)
+#define TX4938_CCFG_PCIDIVMODE_9	(0x2 << 10)
+#define TX4938_CCFG_PCIDIVMODE_10	(0x4 << 10)
+#define TX4938_CCFG_PCIDIVMODE_11	(0x6 << 10)
+#define TX4938_CCFG_PCI1DMD	0x00000100
+#define TX4938_CCFG_SYSSP_MASK	0x000000c0
+#define TX4938_CCFG_ENDIAN	0x00000004
+#define TX4938_CCFG_HALT	0x00000002
+#define TX4938_CCFG_ACEHOLD	0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX4938_PCFG_ETH0_SEL	0x8000000000000000ULL
+#define TX4938_PCFG_ETH1_SEL	0x4000000000000000ULL
+#define TX4938_PCFG_ATA_SEL	0x2000000000000000ULL
+#define TX4938_PCFG_ISA_SEL	0x1000000000000000ULL
+#define TX4938_PCFG_SPI_SEL	0x0800000000000000ULL
+#define TX4938_PCFG_NDF_SEL	0x0400000000000000ULL
+#define TX4938_PCFG_SDCLKDLY_MASK	0x30000000
+#define TX4938_PCFG_SDCLKDLY(d)	((d)<<28)
+#define TX4938_PCFG_SYSCLKEN	0x08000000
+#define TX4938_PCFG_SDCLKEN_ALL	0x07800000
+#define TX4938_PCFG_SDCLKEN(ch)	(0x00800000<<(ch))
+#define TX4938_PCFG_PCICLKEN_ALL	0x003f0000
+#define TX4938_PCFG_PCICLKEN(ch)	(0x00010000<<(ch))
+#define TX4938_PCFG_SEL2	0x00000200
+#define TX4938_PCFG_SEL1	0x00000100
+#define TX4938_PCFG_DMASEL_ALL	0x0000000f
+#define TX4938_PCFG_DMASEL0_DRQ0	0x00000000
+#define TX4938_PCFG_DMASEL0_SIO1	0x00000001
+#define TX4938_PCFG_DMASEL1_DRQ1	0x00000000
+#define TX4938_PCFG_DMASEL1_SIO1	0x00000002
+#define TX4938_PCFG_DMASEL2_DRQ2	0x00000000
+#define TX4938_PCFG_DMASEL2_SIO0	0x00000004
+#define TX4938_PCFG_DMASEL3_DRQ3	0x00000000
+#define TX4938_PCFG_DMASEL3_SIO0	0x00000008
+
+/* CLKCTR : Clock Control */
+#define TX4938_CLKCTR_NDFCKD	0x0001000000000000ULL
+#define TX4938_CLKCTR_NDFRST	0x0000000100000000ULL
+#define TX4938_CLKCTR_ETH1CKD	0x80000000
+#define TX4938_CLKCTR_ETH0CKD	0x40000000
+#define TX4938_CLKCTR_SPICKD	0x20000000
+#define TX4938_CLKCTR_SRAMCKD	0x10000000
+#define TX4938_CLKCTR_PCIC1CKD	0x08000000
+#define TX4938_CLKCTR_DMA1CKD	0x04000000
+#define TX4938_CLKCTR_ACLCKD	0x02000000
+#define TX4938_CLKCTR_PIOCKD	0x01000000
+#define TX4938_CLKCTR_DMACKD	0x00800000
+#define TX4938_CLKCTR_PCICKD	0x00400000
+#define TX4938_CLKCTR_TM0CKD	0x00100000
+#define TX4938_CLKCTR_TM1CKD	0x00080000
+#define TX4938_CLKCTR_TM2CKD	0x00040000
+#define TX4938_CLKCTR_SIO0CKD	0x00020000
+#define TX4938_CLKCTR_SIO1CKD	0x00010000
+#define TX4938_CLKCTR_ETH1RST	0x00008000
+#define TX4938_CLKCTR_ETH0RST	0x00004000
+#define TX4938_CLKCTR_SPIRST	0x00002000
+#define TX4938_CLKCTR_SRAMRST	0x00001000
+#define TX4938_CLKCTR_PCIC1RST	0x00000800
+#define TX4938_CLKCTR_DMA1RST	0x00000400
+#define TX4938_CLKCTR_ACLRST	0x00000200
+#define TX4938_CLKCTR_PIORST	0x00000100
+#define TX4938_CLKCTR_DMARST	0x00000080
+#define TX4938_CLKCTR_PCIRST	0x00000040
+#define TX4938_CLKCTR_TM0RST	0x00000010
+#define TX4938_CLKCTR_TM1RST	0x00000008
+#define TX4938_CLKCTR_TM2RST	0x00000004
+#define TX4938_CLKCTR_SIO0RST	0x00000002
+#define TX4938_CLKCTR_SIO1RST	0x00000001
+
+/*
+ * DMA
+ */
+/* bits for MCR */
+#define TX4938_DMA_MCR_EIS(ch)	(0x10000000<<(ch))
+#define TX4938_DMA_MCR_DIS(ch)	(0x01000000<<(ch))
+#define TX4938_DMA_MCR_RSFIF	0x00000080
+#define TX4938_DMA_MCR_FIFUM(ch)	(0x00000008<<(ch))
+#define TX4938_DMA_MCR_RPRT	0x00000002
+#define TX4938_DMA_MCR_MSTEN	0x00000001
+
+/* bits for CCRn */
+#define TX4938_DMA_CCR_IMMCHN	0x20000000
+#define TX4938_DMA_CCR_USEXFSZ	0x10000000
+#define TX4938_DMA_CCR_LE	0x08000000
+#define TX4938_DMA_CCR_DBINH	0x04000000
+#define TX4938_DMA_CCR_SBINH	0x02000000
+#define TX4938_DMA_CCR_CHRST	0x01000000
+#define TX4938_DMA_CCR_RVBYTE	0x00800000
+#define TX4938_DMA_CCR_ACKPOL	0x00400000
+#define TX4938_DMA_CCR_REQPL	0x00200000
+#define TX4938_DMA_CCR_EGREQ	0x00100000
+#define TX4938_DMA_CCR_CHDN	0x00080000
+#define TX4938_DMA_CCR_DNCTL	0x00060000
+#define TX4938_DMA_CCR_EXTRQ	0x00010000
+#define TX4938_DMA_CCR_INTRQD	0x0000e000
+#define TX4938_DMA_CCR_INTENE	0x00001000
+#define TX4938_DMA_CCR_INTENC	0x00000800
+#define TX4938_DMA_CCR_INTENT	0x00000400
+#define TX4938_DMA_CCR_CHNEN	0x00000200
+#define TX4938_DMA_CCR_XFACT	0x00000100
+#define TX4938_DMA_CCR_SMPCHN	0x00000020
+#define TX4938_DMA_CCR_XFSZ(order)	(((order) << 2) & 0x0000001c)
+#define TX4938_DMA_CCR_XFSZ_1W	TX4938_DMA_CCR_XFSZ(2)
+#define TX4938_DMA_CCR_XFSZ_2W	TX4938_DMA_CCR_XFSZ(3)
+#define TX4938_DMA_CCR_XFSZ_4W	TX4938_DMA_CCR_XFSZ(4)
+#define TX4938_DMA_CCR_XFSZ_8W	TX4938_DMA_CCR_XFSZ(5)
+#define TX4938_DMA_CCR_XFSZ_16W	TX4938_DMA_CCR_XFSZ(6)
+#define TX4938_DMA_CCR_XFSZ_32W	TX4938_DMA_CCR_XFSZ(7)
+#define TX4938_DMA_CCR_MEMIO	0x00000002
+#define TX4938_DMA_CCR_SNGAD	0x00000001
+
+/* bits for CSRn */
+#define TX4938_DMA_CSR_CHNEN	0x00000400
+#define TX4938_DMA_CSR_STLXFER	0x00000200
+#define TX4938_DMA_CSR_CHNACT	0x00000100
+#define TX4938_DMA_CSR_ABCHC	0x00000080
+#define TX4938_DMA_CSR_NCHNC	0x00000040
+#define TX4938_DMA_CSR_NTRNFC	0x00000020
+#define TX4938_DMA_CSR_EXTDN	0x00000010
+#define TX4938_DMA_CSR_CFERR	0x00000008
+#define TX4938_DMA_CSR_CHERR	0x00000004
+#define TX4938_DMA_CSR_DESERR	0x00000002
+#define TX4938_DMA_CSR_SORERR	0x00000001
+
+#define tx4938_sdramcptr	tx4927_sdramcptr
+#define tx4938_ebuscptr		tx4927_ebuscptr
+#define tx4938_pcicptr		tx4927_pcicptr
+#define tx4938_pcic1ptr \
+		((struct tx4927_pcic_reg __iomem *)TX4938_PCIC1_REG)
+#define tx4938_ccfgptr \
+		((struct tx4938_ccfg_reg __iomem *)TX4938_CCFG_REG)
+#define tx4938_pioptr		((struct txx9_pio_reg __iomem *)TX4938_PIO_REG)
+#define tx4938_sramcptr \
+		((struct tx4938_sramc_reg __iomem *)TX4938_SRAMC_REG)
+
+
+#define TX4938_REV_PCODE()	\
+	((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16)
+
+#define tx4938_ccfg_clear(bits)	tx4927_ccfg_clear(bits)
+#define tx4938_ccfg_set(bits)	tx4927_ccfg_set(bits)
+#define tx4938_ccfg_change(change, new)	tx4927_ccfg_change(change, new)
+
+#define TX4938_SDRAMC_CR(ch)	TX4927_SDRAMC_CR(ch)
+#define TX4938_SDRAMC_BA(ch)	TX4927_SDRAMC_BA(ch)
+#define TX4938_SDRAMC_SIZE(ch)	TX4927_SDRAMC_SIZE(ch)
+
+#define TX4938_EBUSC_CR(ch)	TX4927_EBUSC_CR(ch)
+#define TX4938_EBUSC_BA(ch)	TX4927_EBUSC_BA(ch)
+#define TX4938_EBUSC_SIZE(ch)	TX4927_EBUSC_SIZE(ch)
+#define TX4938_EBUSC_WIDTH(ch)	TX4927_EBUSC_WIDTH(ch)
+
+#define tx4938_get_mem_size() tx4927_get_mem_size()
+void tx4938_wdt_init(void);
+void tx4938_setup(void);
+void tx4938_time_init(unsigned int tmrnr);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
+int tx4938_report_pciclk(void);
+void tx4938_report_pci1clk(void);
+int tx4938_pciclk66_setup(void);
+struct pci_dev;
+int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
+void tx4938_irq_init(void);
+void tx4938_mtd_init(int ch);
+
+struct tx4938ide_platform_info {
+	/*
+	 * I/O port shift, for platforms with ports that are
+	 * constantly spaced and need larger than the 1-byte
+	 * spacing used by ata_std_ports().
+	 */
+	unsigned int ioport_shift;
+	unsigned int gbus_clock;	/*  0 means no PIO mode tuning. */
+	unsigned int ebus_ch;
+};
+
+void tx4938_ata_init(unsigned int irq, unsigned int shift, int tune);
+
+#endif
diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h
new file mode 100644
index 0000000..88badb4
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4939.h
@@ -0,0 +1,545 @@
+/*
+ * Definitions for TX4939
+ *
+ * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_TXX9_TX4939_H
+#define __ASM_TXX9_TX4939_H
+
+/* some controllers are compatible with 4927/4938 */
+#include <asm/txx9/tx4938.h>
+
+#ifdef CONFIG_64BIT
+#define TX4939_REG_BASE	0xffffffffff1f0000UL /* == TX4938_REG_BASE */
+#else
+#define TX4939_REG_BASE	0xff1f0000UL /* == TX4938_REG_BASE */
+#endif
+#define TX4939_REG_SIZE	0x00010000 /* == TX4938_REG_SIZE */
+
+#define TX4939_ATA_REG(ch)	(TX4939_REG_BASE + 0x3000 + (ch) * 0x1000)
+#define TX4939_NDFMC_REG	(TX4939_REG_BASE + 0x5000)
+#define TX4939_SRAMC_REG	(TX4939_REG_BASE + 0x6000)
+#define TX4939_CRYPTO_REG	(TX4939_REG_BASE + 0x6800)
+#define TX4939_PCIC1_REG	(TX4939_REG_BASE + 0x7000)
+#define TX4939_DDRC_REG		(TX4939_REG_BASE + 0x8000)
+#define TX4939_EBUSC_REG	(TX4939_REG_BASE + 0x9000)
+#define TX4939_VPC_REG		(TX4939_REG_BASE + 0xa000)
+#define TX4939_DMA_REG(ch)	(TX4939_REG_BASE + 0xb000 + (ch) * 0x800)
+#define TX4939_PCIC_REG		(TX4939_REG_BASE + 0xd000)
+#define TX4939_CCFG_REG		(TX4939_REG_BASE + 0xe000)
+#define TX4939_IRC_REG		(TX4939_REG_BASE + 0xe800)
+#define TX4939_NR_TMR	6	/* 0xf000,0xf100,0xf200,0xfd00,0xfe00,0xff00 */
+#define TX4939_TMR_REG(ch)	\
+	(TX4939_REG_BASE + 0xf000 + ((ch) + ((ch) >= 3) * 10) * 0x100)
+#define TX4939_NR_SIO	4	/* 0xf300, 0xf400, 0xf380, 0xf480 */
+#define TX4939_SIO_REG(ch)	\
+	(TX4939_REG_BASE + 0xf300 + (((ch) & 1) << 8) + (((ch) & 2) << 6))
+#define TX4939_ACLC_REG		(TX4939_REG_BASE + 0xf700)
+#define TX4939_SPI_REG		(TX4939_REG_BASE + 0xf800)
+#define TX4939_I2C_REG		(TX4939_REG_BASE + 0xf900)
+#define TX4939_I2S_REG		(TX4939_REG_BASE + 0xfa00)
+#define TX4939_RTC_REG		(TX4939_REG_BASE + 0xfb00)
+#define TX4939_CIR_REG		(TX4939_REG_BASE + 0xfc00)
+
+struct tx4939_le_reg {
+	__u32 r;
+	__u32 unused;
+};
+
+struct tx4939_ddrc_reg {
+	struct tx4939_le_reg ctl[47];
+	__u64 unused0[17];
+	__u64 winen;
+	__u64 win[4];
+};
+
+struct tx4939_ccfg_reg {
+	__u64 ccfg;
+	__u64 crir;
+	__u64 pcfg;
+	__u64 toea;
+	__u64 clkctr;
+	__u64 unused0;
+	__u64 garbc;
+	__u64 unused1[2];
+	__u64 ramp;
+	__u64 unused2[2];
+	__u64 dskwctrl;
+	__u64 mclkosc;
+	__u64 mclkctl;
+	__u64 unused3[17];
+	struct {
+		__u64 mr;
+		__u64 dr;
+	} gpio[2];
+};
+
+struct tx4939_irc_reg {
+	struct tx4939_le_reg den;
+	struct tx4939_le_reg scipb;
+	struct tx4939_le_reg dm[2];
+	struct tx4939_le_reg lvl[16];
+	struct tx4939_le_reg msk;
+	struct tx4939_le_reg edc;
+	struct tx4939_le_reg pnd0;
+	struct tx4939_le_reg cs;
+	struct tx4939_le_reg pnd1;
+	struct tx4939_le_reg dm2[2];
+	struct tx4939_le_reg dbr[2];
+	struct tx4939_le_reg dben;
+	struct tx4939_le_reg unused0[2];
+	struct tx4939_le_reg flag[2];
+	struct tx4939_le_reg pol;
+	struct tx4939_le_reg cnt;
+	struct tx4939_le_reg maskint;
+	struct tx4939_le_reg maskext;
+};
+
+struct tx4939_rtc_reg {
+	__u32 ctl;
+	__u32 adr;
+	__u32 dat;
+	__u32 tbc;
+};
+
+struct tx4939_crypto_reg {
+	struct tx4939_le_reg csr;
+	struct tx4939_le_reg idesptr;
+	struct tx4939_le_reg cdesptr;
+	struct tx4939_le_reg buserr;
+	struct tx4939_le_reg cip_tout;
+	struct tx4939_le_reg cir;
+	union {
+		struct {
+			struct tx4939_le_reg data[8];
+			struct tx4939_le_reg ctrl;
+		} gen;
+		struct {
+			struct {
+				struct tx4939_le_reg l;
+				struct tx4939_le_reg u;
+			} key[3], ini;
+			struct tx4939_le_reg ctrl;
+		} des;
+		struct {
+			struct tx4939_le_reg key[4];
+			struct tx4939_le_reg ini[4];
+			struct tx4939_le_reg ctrl;
+		} aes;
+		struct {
+			struct {
+				struct tx4939_le_reg l;
+				struct tx4939_le_reg u;
+			} cnt;
+			struct tx4939_le_reg ini[5];
+			struct tx4939_le_reg unused;
+			struct tx4939_le_reg ctrl;
+		} hash;
+	} cdr;
+	struct tx4939_le_reg unused0[7];
+	struct tx4939_le_reg rcsr;
+	struct tx4939_le_reg rpr;
+	__u64 rdr;
+	__u64 ror[3];
+	struct tx4939_le_reg unused1[2];
+	struct tx4939_le_reg xorslr;
+	struct tx4939_le_reg xorsur;
+};
+
+struct tx4939_crypto_desc {
+	__u32 src;
+	__u32 dst;
+	__u32 next;
+	__u32 ctrl;
+	__u32 index;
+	__u32 xor;
+};
+
+struct tx4939_vpc_reg {
+	struct tx4939_le_reg csr;
+	struct {
+		struct tx4939_le_reg ctrlA;
+		struct tx4939_le_reg ctrlB;
+		struct tx4939_le_reg idesptr;
+		struct tx4939_le_reg cdesptr;
+	} port[3];
+	struct tx4939_le_reg buserr;
+};
+
+struct tx4939_vpc_desc {
+	__u32 src;
+	__u32 next;
+	__u32 ctrl1;
+	__u32 ctrl2;
+};
+
+/*
+ * IRC
+ */
+#define TX4939_IR_NONE	0
+#define TX4939_IR_DDR	1
+#define TX4939_IR_WTOERR	2
+#define TX4939_NUM_IR_INT	3
+#define TX4939_IR_INT(n)	(3 + (n))
+#define TX4939_NUM_IR_ETH	2
+#define TX4939_IR_ETH(n)	((n) ? 43 : 6)
+#define TX4939_IR_VIDEO	7
+#define TX4939_IR_CIR	8
+#define TX4939_NUM_IR_SIO	4
+#define TX4939_IR_SIO(n)	((n) ? 43 + (n) : 9)	/* 9,44-46 */
+#define TX4939_NUM_IR_DMA	4
+#define TX4939_IR_DMA(ch, n)	(((ch) ? 22 : 10) + (n)) /* 10-13,22-25 */
+#define TX4939_IR_IRC	14
+#define TX4939_IR_PDMAC	15
+#define TX4939_NUM_IR_TMR	6
+#define TX4939_IR_TMR(n)	(((n) >= 3 ? 45 : 16) + (n)) /* 16-18,48-50 */
+#define TX4939_NUM_IR_ATA	2
+#define TX4939_IR_ATA(n)	(19 + (n))
+#define TX4939_IR_ACLC	21
+#define TX4939_IR_CIPHER	26
+#define TX4939_IR_INTA	27
+#define TX4939_IR_INTB	28
+#define TX4939_IR_INTC	29
+#define TX4939_IR_INTD	30
+#define TX4939_IR_I2C	33
+#define TX4939_IR_SPI	34
+#define TX4939_IR_PCIC	35
+#define TX4939_IR_PCIC1	36
+#define TX4939_IR_PCIERR	37
+#define TX4939_IR_PCIPME	38
+#define TX4939_IR_NDFMC	39
+#define TX4939_IR_ACLCPME	40
+#define TX4939_IR_RTC	41
+#define TX4939_IR_RND	42
+#define TX4939_IR_I2S	47
+#define TX4939_NUM_IR	64
+
+#define TX4939_IRC_INT	2	/* IP[2] in Status register */
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4939_CCFG_PCIBOOT	0x0000040000000000ULL
+#define TX4939_CCFG_WDRST	0x0000020000000000ULL
+#define TX4939_CCFG_WDREXEN	0x0000010000000000ULL
+#define TX4939_CCFG_BCFG_MASK	0x000000ff00000000ULL
+#define TX4939_CCFG_GTOT_MASK	0x06000000
+#define TX4939_CCFG_GTOT_4096	0x06000000
+#define TX4939_CCFG_GTOT_2048	0x04000000
+#define TX4939_CCFG_GTOT_1024	0x02000000
+#define TX4939_CCFG_GTOT_512	0x00000000
+#define TX4939_CCFG_TINTDIS	0x01000000
+#define TX4939_CCFG_PCI66	0x00800000
+#define TX4939_CCFG_PCIMODE	0x00400000
+#define TX4939_CCFG_SSCG	0x00100000
+#define TX4939_CCFG_MULCLK_MASK	0x000e0000
+#define TX4939_CCFG_MULCLK_8	(0x7 << 17)
+#define TX4939_CCFG_MULCLK_9	(0x0 << 17)
+#define TX4939_CCFG_MULCLK_10	(0x1 << 17)
+#define TX4939_CCFG_MULCLK_11	(0x2 << 17)
+#define TX4939_CCFG_MULCLK_12	(0x3 << 17)
+#define TX4939_CCFG_MULCLK_13	(0x4 << 17)
+#define TX4939_CCFG_MULCLK_14	(0x5 << 17)
+#define TX4939_CCFG_MULCLK_15	(0x6 << 17)
+#define TX4939_CCFG_BEOW	0x00010000
+#define TX4939_CCFG_WR	0x00008000
+#define TX4939_CCFG_TOE	0x00004000
+#define TX4939_CCFG_PCIARB	0x00002000
+#define TX4939_CCFG_YDIVMODE_MASK	0x00001c00
+#define TX4939_CCFG_YDIVMODE_2	(0x0 << 10)
+#define TX4939_CCFG_YDIVMODE_3	(0x1 << 10)
+#define TX4939_CCFG_YDIVMODE_5	(0x6 << 10)
+#define TX4939_CCFG_YDIVMODE_6	(0x7 << 10)
+#define TX4939_CCFG_PTSEL	0x00000200
+#define TX4939_CCFG_BESEL	0x00000100
+#define TX4939_CCFG_SYSSP_MASK	0x000000c0
+#define TX4939_CCFG_ACKSEL	0x00000020
+#define TX4939_CCFG_ROMW	0x00000010
+#define TX4939_CCFG_ENDIAN	0x00000004
+#define TX4939_CCFG_ARMODE	0x00000002
+#define TX4939_CCFG_ACEHOLD	0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX4939_PCFG_SIO2MODE_MASK	0xc000000000000000ULL
+#define TX4939_PCFG_SIO2MODE_GPIO	0x8000000000000000ULL
+#define TX4939_PCFG_SIO2MODE_SIO2	0x4000000000000000ULL
+#define TX4939_PCFG_SIO2MODE_SIO0	0x0000000000000000ULL
+#define TX4939_PCFG_SPIMODE	0x2000000000000000ULL
+#define TX4939_PCFG_I2CMODE	0x1000000000000000ULL
+#define TX4939_PCFG_I2SMODE_MASK	0x0c00000000000000ULL
+#define TX4939_PCFG_I2SMODE_GPIO	0x0c00000000000000ULL
+#define TX4939_PCFG_I2SMODE_I2S	0x0800000000000000ULL
+#define TX4939_PCFG_I2SMODE_I2S_ALT	0x0400000000000000ULL
+#define TX4939_PCFG_I2SMODE_ACLC	0x0000000000000000ULL
+#define TX4939_PCFG_SIO3MODE	0x0200000000000000ULL
+#define TX4939_PCFG_DMASEL3	0x0004000000000000ULL
+#define TX4939_PCFG_DMASEL3_SIO0	0x0004000000000000ULL
+#define TX4939_PCFG_DMASEL3_NDFC	0x0000000000000000ULL
+#define TX4939_PCFG_VSSMODE	0x0000200000000000ULL
+#define TX4939_PCFG_VPSMODE	0x0000100000000000ULL
+#define TX4939_PCFG_ET1MODE	0x0000080000000000ULL
+#define TX4939_PCFG_ET0MODE	0x0000040000000000ULL
+#define TX4939_PCFG_ATA1MODE	0x0000020000000000ULL
+#define TX4939_PCFG_ATA0MODE	0x0000010000000000ULL
+#define TX4939_PCFG_BP_PLL	0x0000000100000000ULL
+
+#define TX4939_PCFG_SYSCLKEN	0x08000000
+#define TX4939_PCFG_PCICLKEN_ALL	0x000f0000
+#define TX4939_PCFG_PCICLKEN(ch)	(0x00010000<<(ch))
+#define TX4939_PCFG_SPEED1	0x00002000
+#define TX4939_PCFG_SPEED0	0x00001000
+#define TX4939_PCFG_ITMODE	0x00000300
+#define TX4939_PCFG_DMASEL_ALL	(0x00000007 | TX4939_PCFG_DMASEL3)
+#define TX4939_PCFG_DMASEL2	0x00000004
+#define TX4939_PCFG_DMASEL2_DRQ2	0x00000000
+#define TX4939_PCFG_DMASEL2_SIO0	0x00000004
+#define TX4939_PCFG_DMASEL1	0x00000002
+#define TX4939_PCFG_DMASEL1_DRQ1	0x00000000
+#define TX4939_PCFG_DMASEL0	0x00000001
+#define TX4939_PCFG_DMASEL0_DRQ0	0x00000000
+
+/* CLKCTR : Clock Control */
+#define TX4939_CLKCTR_IOSCKD	0x8000000000000000ULL
+#define TX4939_CLKCTR_SYSCKD	0x4000000000000000ULL
+#define TX4939_CLKCTR_TM5CKD	0x2000000000000000ULL
+#define TX4939_CLKCTR_TM4CKD	0x1000000000000000ULL
+#define TX4939_CLKCTR_TM3CKD	0x0800000000000000ULL
+#define TX4939_CLKCTR_CIRCKD	0x0400000000000000ULL
+#define TX4939_CLKCTR_SIO3CKD	0x0200000000000000ULL
+#define TX4939_CLKCTR_SIO2CKD	0x0100000000000000ULL
+#define TX4939_CLKCTR_SIO1CKD	0x0080000000000000ULL
+#define TX4939_CLKCTR_VPCCKD	0x0040000000000000ULL
+#define TX4939_CLKCTR_EPCICKD	0x0020000000000000ULL
+#define TX4939_CLKCTR_ETH1CKD	0x0008000000000000ULL
+#define TX4939_CLKCTR_ATA1CKD	0x0004000000000000ULL
+#define TX4939_CLKCTR_BROMCKD	0x0002000000000000ULL
+#define TX4939_CLKCTR_NDCCKD	0x0001000000000000ULL
+#define TX4939_CLKCTR_I2CCKD	0x0000800000000000ULL
+#define TX4939_CLKCTR_ETH0CKD	0x0000400000000000ULL
+#define TX4939_CLKCTR_SPICKD	0x0000200000000000ULL
+#define TX4939_CLKCTR_SRAMCKD	0x0000100000000000ULL
+#define TX4939_CLKCTR_PCI1CKD	0x0000080000000000ULL
+#define TX4939_CLKCTR_DMA1CKD	0x0000040000000000ULL
+#define TX4939_CLKCTR_ACLCKD	0x0000020000000000ULL
+#define TX4939_CLKCTR_ATA0CKD	0x0000010000000000ULL
+#define TX4939_CLKCTR_DMA0CKD	0x0000008000000000ULL
+#define TX4939_CLKCTR_PCICCKD	0x0000004000000000ULL
+#define TX4939_CLKCTR_I2SCKD	0x0000002000000000ULL
+#define TX4939_CLKCTR_TM0CKD	0x0000001000000000ULL
+#define TX4939_CLKCTR_TM1CKD	0x0000000800000000ULL
+#define TX4939_CLKCTR_TM2CKD	0x0000000400000000ULL
+#define TX4939_CLKCTR_SIO0CKD	0x0000000200000000ULL
+#define TX4939_CLKCTR_CYPCKD	0x0000000100000000ULL
+#define TX4939_CLKCTR_IOSRST	0x80000000
+#define TX4939_CLKCTR_SYSRST	0x40000000
+#define TX4939_CLKCTR_TM5RST	0x20000000
+#define TX4939_CLKCTR_TM4RST	0x10000000
+#define TX4939_CLKCTR_TM3RST	0x08000000
+#define TX4939_CLKCTR_CIRRST	0x04000000
+#define TX4939_CLKCTR_SIO3RST	0x02000000
+#define TX4939_CLKCTR_SIO2RST	0x01000000
+#define TX4939_CLKCTR_SIO1RST	0x00800000
+#define TX4939_CLKCTR_VPCRST	0x00400000
+#define TX4939_CLKCTR_EPCIRST	0x00200000
+#define TX4939_CLKCTR_ETH1RST	0x00080000
+#define TX4939_CLKCTR_ATA1RST	0x00040000
+#define TX4939_CLKCTR_BROMRST	0x00020000
+#define TX4939_CLKCTR_NDCRST	0x00010000
+#define TX4939_CLKCTR_I2CRST	0x00008000
+#define TX4939_CLKCTR_ETH0RST	0x00004000
+#define TX4939_CLKCTR_SPIRST	0x00002000
+#define TX4939_CLKCTR_SRAMRST	0x00001000
+#define TX4939_CLKCTR_PCI1RST	0x00000800
+#define TX4939_CLKCTR_DMA1RST	0x00000400
+#define TX4939_CLKCTR_ACLRST	0x00000200
+#define TX4939_CLKCTR_ATA0RST	0x00000100
+#define TX4939_CLKCTR_DMA0RST	0x00000080
+#define TX4939_CLKCTR_PCICRST	0x00000040
+#define TX4939_CLKCTR_I2SRST	0x00000020
+#define TX4939_CLKCTR_TM0RST	0x00000010
+#define TX4939_CLKCTR_TM1RST	0x00000008
+#define TX4939_CLKCTR_TM2RST	0x00000004
+#define TX4939_CLKCTR_SIO0RST	0x00000002
+#define TX4939_CLKCTR_CYPRST	0x00000001
+
+/*
+ * RTC
+ */
+#define TX4939_RTCCTL_ALME	0x00000080
+#define TX4939_RTCCTL_ALMD	0x00000040
+#define TX4939_RTCCTL_BUSY	0x00000020
+
+#define TX4939_RTCCTL_COMMAND	0x00000007
+#define TX4939_RTCCTL_COMMAND_NOP	0x00000000
+#define TX4939_RTCCTL_COMMAND_GETTIME	0x00000001
+#define TX4939_RTCCTL_COMMAND_SETTIME	0x00000002
+#define TX4939_RTCCTL_COMMAND_GETALARM	0x00000003
+#define TX4939_RTCCTL_COMMAND_SETALARM	0x00000004
+
+#define TX4939_RTCTBC_PM	0x00000080
+#define TX4939_RTCTBC_COMP	0x0000007f
+
+#define TX4939_RTC_REG_RAMSIZE	0x00000100
+#define TX4939_RTC_REG_RWBSIZE	0x00000006
+
+/*
+ * CRYPTO
+ */
+#define TX4939_CRYPTO_CSR_SAESO	0x08000000
+#define TX4939_CRYPTO_CSR_SAESI	0x04000000
+#define TX4939_CRYPTO_CSR_SDESO	0x02000000
+#define TX4939_CRYPTO_CSR_SDESI	0x01000000
+#define TX4939_CRYPTO_CSR_INDXBST_MASK	0x00700000
+#define TX4939_CRYPTO_CSR_INDXBST(n)	((n) << 20)
+#define TX4939_CRYPTO_CSR_TOINT	0x00080000
+#define TX4939_CRYPTO_CSR_DCINT	0x00040000
+#define TX4939_CRYPTO_CSR_GBINT	0x00010000
+#define TX4939_CRYPTO_CSR_INDXAST_MASK	0x0000e000
+#define TX4939_CRYPTO_CSR_INDXAST(n)	((n) << 13)
+#define TX4939_CRYPTO_CSR_CSWAP_MASK	0x00001800
+#define TX4939_CRYPTO_CSR_CSWAP_NONE	0x00000000
+#define TX4939_CRYPTO_CSR_CSWAP_IN	0x00000800
+#define TX4939_CRYPTO_CSR_CSWAP_OUT	0x00001000
+#define TX4939_CRYPTO_CSR_CSWAP_BOTH	0x00001800
+#define TX4939_CRYPTO_CSR_CDIV_MASK	0x00000600
+#define TX4939_CRYPTO_CSR_CDIV_DIV2	0x00000000
+#define TX4939_CRYPTO_CSR_CDIV_DIV1	0x00000200
+#define TX4939_CRYPTO_CSR_CDIV_DIV2ALT	0x00000400
+#define TX4939_CRYPTO_CSR_CDIV_DIV1ALT	0x00000600
+#define TX4939_CRYPTO_CSR_PDINT_MASK	0x000000c0
+#define TX4939_CRYPTO_CSR_PDINT_ALL	0x00000000
+#define TX4939_CRYPTO_CSR_PDINT_END	0x00000040
+#define TX4939_CRYPTO_CSR_PDINT_NEXT	0x00000080
+#define TX4939_CRYPTO_CSR_PDINT_NONE	0x000000c0
+#define TX4939_CRYPTO_CSR_GINTE	0x00000008
+#define TX4939_CRYPTO_CSR_RSTD	0x00000004
+#define TX4939_CRYPTO_CSR_RSTC	0x00000002
+#define TX4939_CRYPTO_CSR_ENCR	0x00000001
+
+/* bits for tx4939_crypto_reg.cdr.gen.ctrl */
+#define TX4939_CRYPTO_CTX_ENGINE_MASK	0x00000003
+#define TX4939_CRYPTO_CTX_ENGINE_DES	0x00000000
+#define TX4939_CRYPTO_CTX_ENGINE_AES	0x00000001
+#define TX4939_CRYPTO_CTX_ENGINE_MD5	0x00000002
+#define TX4939_CRYPTO_CTX_ENGINE_SHA1	0x00000003
+#define TX4939_CRYPTO_CTX_TDMS	0x00000010
+#define TX4939_CRYPTO_CTX_CMS	0x00000020
+#define TX4939_CRYPTO_CTX_DMS	0x00000040
+#define TX4939_CRYPTO_CTX_UPDATE	0x00000080
+
+/* bits for tx4939_crypto_desc.ctrl */
+#define TX4939_CRYPTO_DESC_OB_CNT_MASK	0xffe00000
+#define TX4939_CRYPTO_DESC_OB_CNT(cnt)	((cnt) << 21)
+#define TX4939_CRYPTO_DESC_IB_CNT_MASK	0x001ffc00
+#define TX4939_CRYPTO_DESC_IB_CNT(cnt)	((cnt) << 10)
+#define TX4939_CRYPTO_DESC_START	0x00000200
+#define TX4939_CRYPTO_DESC_END	0x00000100
+#define TX4939_CRYPTO_DESC_XOR	0x00000010
+#define TX4939_CRYPTO_DESC_LAST	0x00000008
+#define TX4939_CRYPTO_DESC_ERR_MASK	0x00000006
+#define TX4939_CRYPTO_DESC_ERR_NONE	0x00000000
+#define TX4939_CRYPTO_DESC_ERR_TOUT	0x00000002
+#define TX4939_CRYPTO_DESC_ERR_DIGEST	0x00000004
+#define TX4939_CRYPTO_DESC_OWN	0x00000001
+
+/* bits for tx4939_crypto_desc.index */
+#define TX4939_CRYPTO_DESC_HASH_IDX_MASK	0x00000070
+#define TX4939_CRYPTO_DESC_HASH_IDX(idx)	((idx) << 4)
+#define TX4939_CRYPTO_DESC_ENCRYPT_IDX_MASK	0x00000007
+#define TX4939_CRYPTO_DESC_ENCRYPT_IDX(idx)	((idx) << 0)
+
+#define TX4939_CRYPTO_NR_SET	6
+
+#define TX4939_CRYPTO_RCSR_INTE	0x00000008
+#define TX4939_CRYPTO_RCSR_RST	0x00000004
+#define TX4939_CRYPTO_RCSR_FIN	0x00000002
+#define TX4939_CRYPTO_RCSR_ST	0x00000001
+
+/*
+ * VPC
+ */
+#define TX4939_VPC_CSR_GBINT	0x00010000
+#define TX4939_VPC_CSR_SWAPO	0x00000020
+#define TX4939_VPC_CSR_SWAPI	0x00000010
+#define TX4939_VPC_CSR_GINTE	0x00000008
+#define TX4939_VPC_CSR_RSTD	0x00000004
+#define TX4939_VPC_CSR_RSTVPC	0x00000002
+
+#define TX4939_VPC_CTRLA_VDPSN	0x00000200
+#define TX4939_VPC_CTRLA_PBUSY	0x00000100
+#define TX4939_VPC_CTRLA_DCINT	0x00000080
+#define TX4939_VPC_CTRLA_UOINT	0x00000040
+#define TX4939_VPC_CTRLA_PDINT_MASK	0x00000030
+#define TX4939_VPC_CTRLA_PDINT_ALL	0x00000000
+#define TX4939_VPC_CTRLA_PDINT_NEXT	0x00000010
+#define TX4939_VPC_CTRLA_PDINT_NONE	0x00000030
+#define TX4939_VPC_CTRLA_VDVLDP	0x00000008
+#define TX4939_VPC_CTRLA_VDMODE	0x00000004
+#define TX4939_VPC_CTRLA_VDFOR	0x00000002
+#define TX4939_VPC_CTRLA_ENVPC	0x00000001
+
+/* bits for tx4939_vpc_desc.ctrl1 */
+#define TX4939_VPC_DESC_CTRL1_ERR_MASK	0x00000006
+#define TX4939_VPC_DESC_CTRL1_OWN	0x00000001
+
+#define tx4939_ddrcptr	((struct tx4939_ddrc_reg __iomem *)TX4939_DDRC_REG)
+#define tx4939_ebuscptr		tx4938_ebuscptr
+#define tx4939_ircptr \
+		((struct tx4939_irc_reg __iomem *)TX4939_IRC_REG)
+#define tx4939_pcicptr		tx4938_pcicptr
+#define tx4939_pcic1ptr		tx4938_pcic1ptr
+#define tx4939_ccfgptr \
+		((struct tx4939_ccfg_reg __iomem *)TX4939_CCFG_REG)
+#define tx4939_sramcptr		tx4938_sramcptr
+#define tx4939_rtcptr \
+		((struct tx4939_rtc_reg __iomem *)TX4939_RTC_REG)
+#define tx4939_cryptoptr \
+		((struct tx4939_crypto_reg __iomem *)TX4939_CRYPTO_REG)
+#define tx4939_vpcptr	((struct tx4939_vpc_reg __iomem *)TX4939_VPC_REG)
+
+#define TX4939_REV_MAJ_MIN()	\
+	((__u32)__raw_readq(&tx4939_ccfgptr->crir) & 0x00ff)
+#define TX4939_REV_PCODE()	\
+	((__u32)__raw_readq(&tx4939_ccfgptr->crir) >> 16)
+#define TX4939_CCFG_BCFG()	\
+	((__u32)((__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_BCFG_MASK) \
+		 >> 32))
+
+#define tx4939_ccfg_clear(bits)	tx4938_ccfg_clear(bits)
+#define tx4939_ccfg_set(bits)	tx4938_ccfg_set(bits)
+#define tx4939_ccfg_change(change, new)	tx4938_ccfg_change(change, new)
+
+#define TX4939_EBUSC_CR(ch)	TX4927_EBUSC_CR(ch)
+#define TX4939_EBUSC_BA(ch)	TX4927_EBUSC_BA(ch)
+#define TX4939_EBUSC_SIZE(ch)	TX4927_EBUSC_SIZE(ch)
+#define TX4939_EBUSC_WIDTH(ch)	\
+	(16 >> ((__u32)(TX4939_EBUSC_CR(ch) >> 20) & 0x1))
+
+/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2  (14.745MHz for MST 20MHz) */
+#define TX4939_SCLK0(mst)	\
+	((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2)
+
+void tx4939_wdt_init(void);
+void tx4939_add_memory_regions(void);
+void tx4939_setup(void);
+void tx4939_time_init(unsigned int tmrnr);
+void tx4939_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4939_spi_init(int busid);
+void tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
+int tx4939_report_pciclk(void);
+void tx4939_report_pci1clk(void);
+struct pci_dev;
+int tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+int tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+void tx4939_setup_pcierr_irq(void);
+void tx4939_irq_init(void);
+int tx4939_irq(void);
+void tx4939_mtd_init(int ch);
+void tx4939_ata_init(void);
+
+#endif /* __ASM_TXX9_TX4939_H */
diff --git a/arch/mips/include/asm/txx9irq.h b/arch/mips/include/asm/txx9irq.h
new file mode 100644
index 0000000..5620879
--- /dev/null
+++ b/arch/mips/include/asm/txx9irq.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-mips/txx9irq.h
+ * TX39/TX49 interrupt controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9IRQ_H
+#define __ASM_TXX9IRQ_H
+
+#include <irq.h>
+
+#ifdef CONFIG_IRQ_CPU
+#define TXX9_IRQ_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE	(I8259A_IRQ_BASE + 16)
+#else
+#define TXX9_IRQ_BASE	0
+#endif
+#endif
+
+#ifdef CONFIG_CPU_TX39XX
+#define TXx9_MAX_IR 16
+#else
+#define TXx9_MAX_IR 32
+#endif
+
+void txx9_irq_init(unsigned long baseaddr);
+int txx9_irq(void);
+int txx9_irq_set_pri(int irc_irq, int new_pri);
+
+#endif /* __ASM_TXX9IRQ_H */
diff --git a/arch/mips/include/asm/txx9pio.h b/arch/mips/include/asm/txx9pio.h
new file mode 100644
index 0000000..3d6fa9f
--- /dev/null
+++ b/arch/mips/include/asm/txx9pio.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-mips/txx9pio.h
+ * TX39/TX49 PIO controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9PIO_H
+#define __ASM_TXX9PIO_H
+
+#include <linux/types.h>
+
+struct txx9_pio_reg {
+	__u32 dout;
+	__u32 din;
+	__u32 dir;
+	__u32 od;
+	__u32 flag[2];
+	__u32 pol;
+	__u32 intc;
+	__u32 maskcpu;
+	__u32 maskext;
+};
+
+int txx9_gpio_init(unsigned long baseaddr,
+		   unsigned int base, unsigned int num);
+
+#endif /* __ASM_TXX9PIO_H */
diff --git a/arch/mips/include/asm/txx9tmr.h b/arch/mips/include/asm/txx9tmr.h
new file mode 100644
index 0000000..67f70a8
--- /dev/null
+++ b/arch/mips/include/asm/txx9tmr.h
@@ -0,0 +1,67 @@
+/*
+ * include/asm-mips/txx9tmr.h
+ * TX39/TX49 timer controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9TMR_H
+#define __ASM_TXX9TMR_H
+
+#include <linux/types.h>
+
+struct txx9_tmr_reg {
+	u32 tcr;
+	u32 tisr;
+	u32 cpra;
+	u32 cprb;
+	u32 itmr;
+	u32 unused0[3];
+	u32 ccdr;
+	u32 unused1[3];
+	u32 pgmr;
+	u32 unused2[3];
+	u32 wtmr;
+	u32 unused3[43];
+	u32 trr;
+};
+
+/* TMTCR : Timer Control */
+#define TXx9_TMTCR_TCE		0x00000080
+#define TXx9_TMTCR_CCDE		0x00000040
+#define TXx9_TMTCR_CRE		0x00000020
+#define TXx9_TMTCR_ECES		0x00000008
+#define TXx9_TMTCR_CCS		0x00000004
+#define TXx9_TMTCR_TMODE_MASK	0x00000003
+#define TXx9_TMTCR_TMODE_ITVL	0x00000000
+#define TXx9_TMTCR_TMODE_PGEN	0x00000001
+#define TXx9_TMTCR_TMODE_WDOG	0x00000002
+
+/* TMTISR : Timer Int. Status */
+#define TXx9_TMTISR_TPIBS	0x00000004
+#define TXx9_TMTISR_TPIAS	0x00000002
+#define TXx9_TMTISR_TIIS	0x00000001
+
+/* TMITMR : Interval Timer Mode */
+#define TXx9_TMITMR_TIIE	0x00008000
+#define TXx9_TMITMR_TZCE	0x00000001
+
+/* TMWTMR : Watchdog Timer Mode */
+#define TXx9_TMWTMR_TWIE	0x00008000
+#define TXx9_TMWTMR_WDIS	0x00000080
+#define TXx9_TMWTMR_TWC		0x00000001
+
+void txx9_clocksource_init(unsigned long baseaddr,
+			   unsigned int imbusclk);
+void txx9_clockevent_init(unsigned long baseaddr, int irq,
+			  unsigned int imbusclk);
+void txx9_tmr_init(unsigned long baseaddr);
+
+#ifdef CONFIG_CPU_TX39XX
+#define TXX9_TIMER_BITS	24
+#else
+#define TXX9_TIMER_BITS	32
+#endif
+
+#endif /* __ASM_TXX9TMR_H */
diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h
new file mode 100644
index 0000000..bcbb8d6
--- /dev/null
+++ b/arch/mips/include/asm/types.h
@@ -0,0 +1,54 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#if _MIPS_SZLONG == 64
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG _MIPS_SZLONG
+
+#ifndef __ASSEMBLY__
+
+#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \
+    || defined(CONFIG_64BIT)
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+typedef u64 dma64_addr_t;
+
+/*
+ * Don't use phys_t.  You've been warned.
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+typedef unsigned long long phys_t;
+#else
+typedef unsigned long phys_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
new file mode 100644
index 0000000..09ff5bb
--- /dev/null
+++ b/arch/mips/include/asm/uaccess.h
@@ -0,0 +1,1114 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999, 2000, 03, 04 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#ifdef CONFIG_32BIT
+
+#define __UA_LIMIT	0x80000000UL
+
+#define __UA_ADDR	".word"
+#define __UA_LA		"la"
+#define __UA_ADDU	"addu"
+#define __UA_t0		"$8"
+#define __UA_t1		"$9"
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#define __UA_LIMIT	(- TASK_SIZE)
+
+#define __UA_ADDR	".dword"
+#define __UA_LA		"dla"
+#define __UA_ADDU	"daddu"
+#define __UA_t0		"$12"
+#define __UA_t1		"$13"
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * USER_DS is a bitmask that has the bits set that may not be set in a valid
+ * userspace address.  Note that we limit 32-bit userspace to 0x7fff8000 but
+ * the arithmetic we're doing only works if the limit is a power of two, so
+ * we use 0x80000000 here on 32-bit kernels.  If a process passes an invalid
+ * address in this range it's the process's problem, not ours :-)
+ */
+
+#define KERNEL_DS	((mm_segment_t) { 0UL })
+#define USER_DS		((mm_segment_t) { __UA_LIMIT })
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+
+/*
+ * Is a address valid? This does a straighforward calculation rather
+ * than tests.
+ *
+ * Address valid if:
+ *  - "addr" doesn't have any high-bits set
+ *  - AND "size" doesn't have any high-bits set
+ *  - AND "addr+size" doesn't have any high-bits set
+ *  - OR we are in kernel mode.
+ *
+ * __ua_size() is a trick to avoid runtime checking of positive constant
+ * sizes; for those we already know at compile time that the size is ok.
+ */
+#define __ua_size(size)							\
+	((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size))
+
+/*
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+
+#define __access_mask get_fs().seg
+
+#define __access_ok(addr, size, mask)					\
+	(((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+
+#define access_ok(type, addr, size)					\
+	likely(__access_ok((unsigned long)(addr), (size), __access_mask))
+
+/*
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x,ptr)	\
+	__put_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x,ptr) \
+	__get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x,ptr) \
+	__put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x,ptr) \
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef CONFIG_32BIT
+#define __GET_USER_DW(val, ptr) __get_user_asm_ll32(val, ptr)
+#endif
+#ifdef CONFIG_64BIT
+#define __GET_USER_DW(val, ptr) __get_user_asm(val, "ld", ptr)
+#endif
+
+extern void __get_user_unknown(void);
+
+#define __get_user_common(val, size, ptr)				\
+do {									\
+	switch (size) {							\
+	case 1: __get_user_asm(val, "lb", ptr); break;			\
+	case 2: __get_user_asm(val, "lh", ptr); break;			\
+	case 4: __get_user_asm(val, "lw", ptr); break;			\
+	case 8: __GET_USER_DW(val, ptr); break;				\
+	default: __get_user_unknown(); break;				\
+	}								\
+} while (0)
+
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	int __gu_err;							\
+									\
+	__get_user_common((x), size, ptr);				\
+	__gu_err;							\
+})
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	int __gu_err = -EFAULT;						\
+	const __typeof__(*(ptr)) __user * __gu_ptr = (ptr);		\
+									\
+	if (likely(access_ok(VERIFY_READ,  __gu_ptr, size)))		\
+		__get_user_common((x), size, __gu_ptr);			\
+									\
+	__gu_err;							\
+})
+
+#define __get_user_asm(val, insn, addr)					\
+{									\
+	long __gu_tmp;							\
+									\
+	__asm__ __volatile__(						\
+	"1:	" insn "	%1, %3				\n"	\
+	"2:							\n"	\
+	"	.section .fixup,\"ax\"				\n"	\
+	"3:	li	%0, %4					\n"	\
+	"	j	2b					\n"	\
+	"	.previous					\n"	\
+	"	.section __ex_table,\"a\"			\n"	\
+	"	"__UA_ADDR "\t1b, 3b				\n"	\
+	"	.previous					\n"	\
+	: "=r" (__gu_err), "=r" (__gu_tmp)				\
+	: "0" (0), "o" (__m(addr)), "i" (-EFAULT));			\
+									\
+	(val) = (__typeof__(*(addr))) __gu_tmp;				\
+}
+
+/*
+ * Get a long long 64 using 32 bit registers.
+ */
+#define __get_user_asm_ll32(val, addr)					\
+{									\
+	union {								\
+		unsigned long long	l;				\
+		__typeof__(*(addr))	t;				\
+	} __gu_tmp;							\
+									\
+	__asm__ __volatile__(						\
+	"1:	lw	%1, (%3)				\n"	\
+	"2:	lw	%D1, 4(%3)				\n"	\
+	"3:	.section	.fixup,\"ax\"			\n"	\
+	"4:	li	%0, %4					\n"	\
+	"	move	%1, $0					\n"	\
+	"	move	%D1, $0					\n"	\
+	"	j	3b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 4b				\n"	\
+	"	" __UA_ADDR "	2b, 4b				\n"	\
+	"	.previous					\n"	\
+	: "=r" (__gu_err), "=&r" (__gu_tmp.l)				\
+	: "0" (0), "r" (addr), "i" (-EFAULT));				\
+									\
+	(val) = __gu_tmp.t;						\
+}
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef CONFIG_32BIT
+#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr)
+#endif
+#ifdef CONFIG_64BIT
+#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr)
+#endif
+
+#define __put_user_nocheck(x, ptr, size)				\
+({									\
+	__typeof__(*(ptr)) __pu_val;					\
+	int __pu_err = 0;						\
+									\
+	__pu_val = (x);							\
+	switch (size) {							\
+	case 1: __put_user_asm("sb", ptr); break;			\
+	case 2: __put_user_asm("sh", ptr); break;			\
+	case 4: __put_user_asm("sw", ptr); break;			\
+	case 8: __PUT_USER_DW(ptr); break;				\
+	default: __put_user_unknown(); break;				\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	__typeof__(*(ptr)) __pu_val = (x);				\
+	int __pu_err = -EFAULT;						\
+									\
+	if (likely(access_ok(VERIFY_WRITE,  __pu_addr, size))) {	\
+		switch (size) {						\
+		case 1: __put_user_asm("sb", __pu_addr); break;		\
+		case 2: __put_user_asm("sh", __pu_addr); break;		\
+		case 4: __put_user_asm("sw", __pu_addr); break;		\
+		case 8: __PUT_USER_DW(__pu_addr); break;		\
+		default: __put_user_unknown(); break;			\
+		}							\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_asm(insn, ptr)					\
+{									\
+	__asm__ __volatile__(						\
+	"1:	" insn "	%z2, %3		# __put_user_asm\n"	\
+	"2:							\n"	\
+	"	.section	.fixup,\"ax\"			\n"	\
+	"3:	li	%0, %4					\n"	\
+	"	j	2b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 3b				\n"	\
+	"	.previous					\n"	\
+	: "=r" (__pu_err)						\
+	: "0" (0), "Jr" (__pu_val), "o" (__m(ptr)),			\
+	  "i" (-EFAULT));						\
+}
+
+#define __put_user_asm_ll32(ptr)					\
+{									\
+	__asm__ __volatile__(						\
+	"1:	sw	%2, (%3)	# __put_user_asm_ll32	\n"	\
+	"2:	sw	%D2, 4(%3)				\n"	\
+	"3:							\n"	\
+	"	.section	.fixup,\"ax\"			\n"	\
+	"4:	li	%0, %4					\n"	\
+	"	j	3b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 4b				\n"	\
+	"	" __UA_ADDR "	2b, 4b				\n"	\
+	"	.previous"						\
+	: "=r" (__pu_err)						\
+	: "0" (0), "r" (__pu_val), "r" (ptr),				\
+	  "i" (-EFAULT));						\
+}
+
+extern void __put_user_unknown(void);
+
+/*
+ * put_user_unaligned: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user_unaligned(x,ptr)	\
+	__put_user_unaligned_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * get_user_unaligned: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user_unaligned(x,ptr) \
+	__get_user_unaligned_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * __put_user_unaligned: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user_unaligned(x,ptr) \
+	__put_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * __get_user_unaligned: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user_unaligned(x,ptr) \
+	__get_user__unalignednocheck((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef CONFIG_32BIT
+#define __GET_USER_UNALIGNED_DW(val, ptr)				\
+	__get_user_unaligned_asm_ll32(val, ptr)
+#endif
+#ifdef CONFIG_64BIT
+#define __GET_USER_UNALIGNED_DW(val, ptr)				\
+	__get_user_unaligned_asm(val, "uld", ptr)
+#endif
+
+extern void __get_user_unaligned_unknown(void);
+
+#define __get_user_unaligned_common(val, size, ptr)			\
+do {									\
+	switch (size) {							\
+	case 1: __get_user_asm(val, "lb", ptr); break;			\
+	case 2: __get_user_unaligned_asm(val, "ulh", ptr); break;	\
+	case 4: __get_user_unaligned_asm(val, "ulw", ptr); break;	\
+	case 8: __GET_USER_UNALIGNED_DW(val, ptr); break;		\
+	default: __get_user_unaligned_unknown(); break;			\
+	}								\
+} while (0)
+
+#define __get_user_unaligned_nocheck(x,ptr,size)			\
+({									\
+	int __gu_err;							\
+									\
+	__get_user_unaligned_common((x), size, ptr);			\
+	__gu_err;							\
+})
+
+#define __get_user_unaligned_check(x,ptr,size)				\
+({									\
+	int __gu_err = -EFAULT;						\
+	const __typeof__(*(ptr)) __user * __gu_ptr = (ptr);		\
+									\
+	if (likely(access_ok(VERIFY_READ,  __gu_ptr, size)))		\
+		__get_user_unaligned_common((x), size, __gu_ptr);	\
+									\
+	__gu_err;							\
+})
+
+#define __get_user_unaligned_asm(val, insn, addr)			\
+{									\
+	long __gu_tmp;							\
+									\
+	__asm__ __volatile__(						\
+	"1:	" insn "	%1, %3				\n"	\
+	"2:							\n"	\
+	"	.section .fixup,\"ax\"				\n"	\
+	"3:	li	%0, %4					\n"	\
+	"	j	2b					\n"	\
+	"	.previous					\n"	\
+	"	.section __ex_table,\"a\"			\n"	\
+	"	"__UA_ADDR "\t1b, 3b				\n"	\
+	"	"__UA_ADDR "\t1b + 4, 3b			\n"	\
+	"	.previous					\n"	\
+	: "=r" (__gu_err), "=r" (__gu_tmp)				\
+	: "0" (0), "o" (__m(addr)), "i" (-EFAULT));			\
+									\
+	(val) = (__typeof__(*(addr))) __gu_tmp;				\
+}
+
+/*
+ * Get a long long 64 using 32 bit registers.
+ */
+#define __get_user_unaligned_asm_ll32(val, addr)			\
+{									\
+        unsigned long long __gu_tmp;					\
+									\
+	__asm__ __volatile__(						\
+	"1:	ulw	%1, (%3)				\n"	\
+	"2:	ulw	%D1, 4(%3)				\n"	\
+	"	move	%0, $0					\n"	\
+	"3:	.section	.fixup,\"ax\"			\n"	\
+	"4:	li	%0, %4					\n"	\
+	"	move	%1, $0					\n"	\
+	"	move	%D1, $0					\n"	\
+	"	j	3b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 4b				\n"	\
+	"	" __UA_ADDR "	1b + 4, 4b			\n"	\
+	"	" __UA_ADDR "	2b, 4b				\n"	\
+	"	" __UA_ADDR "	2b + 4, 4b			\n"	\
+	"	.previous					\n"	\
+	: "=r" (__gu_err), "=&r" (__gu_tmp)				\
+	: "0" (0), "r" (addr), "i" (-EFAULT));				\
+	(val) = (__typeof__(*(addr))) __gu_tmp;				\
+}
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef CONFIG_32BIT
+#define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm_ll32(ptr)
+#endif
+#ifdef CONFIG_64BIT
+#define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm("usd", ptr)
+#endif
+
+#define __put_user_unaligned_nocheck(x,ptr,size)			\
+({									\
+	__typeof__(*(ptr)) __pu_val;					\
+	int __pu_err = 0;						\
+									\
+	__pu_val = (x);							\
+	switch (size) {							\
+	case 1: __put_user_asm("sb", ptr); break;			\
+	case 2: __put_user_unaligned_asm("ush", ptr); break;		\
+	case 4: __put_user_unaligned_asm("usw", ptr); break;		\
+	case 8: __PUT_USER_UNALIGNED_DW(ptr); break;			\
+	default: __put_user_unaligned_unknown(); break;			\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_unaligned_check(x,ptr,size)				\
+({									\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	__typeof__(*(ptr)) __pu_val = (x);				\
+	int __pu_err = -EFAULT;						\
+									\
+	if (likely(access_ok(VERIFY_WRITE,  __pu_addr, size))) {	\
+		switch (size) {						\
+		case 1: __put_user_asm("sb", __pu_addr); break;		\
+		case 2: __put_user_unaligned_asm("ush", __pu_addr); break; \
+		case 4: __put_user_unaligned_asm("usw", __pu_addr); break; \
+		case 8: __PUT_USER_UNALGINED_DW(__pu_addr); break;	\
+		default: __put_user_unaligned_unknown(); break;		\
+		}							\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_unaligned_asm(insn, ptr)				\
+{									\
+	__asm__ __volatile__(						\
+	"1:	" insn "	%z2, %3		# __put_user_unaligned_asm\n" \
+	"2:							\n"	\
+	"	.section	.fixup,\"ax\"			\n"	\
+	"3:	li	%0, %4					\n"	\
+	"	j	2b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 3b				\n"	\
+	"	.previous					\n"	\
+	: "=r" (__pu_err)						\
+	: "0" (0), "Jr" (__pu_val), "o" (__m(ptr)),			\
+	  "i" (-EFAULT));						\
+}
+
+#define __put_user_unaligned_asm_ll32(ptr)				\
+{									\
+	__asm__ __volatile__(						\
+	"1:	sw	%2, (%3)	# __put_user_unaligned_asm_ll32	\n" \
+	"2:	sw	%D2, 4(%3)				\n"	\
+	"3:							\n"	\
+	"	.section	.fixup,\"ax\"			\n"	\
+	"4:	li	%0, %4					\n"	\
+	"	j	3b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 4b				\n"	\
+	"	" __UA_ADDR "	1b + 4, 4b			\n"	\
+	"	" __UA_ADDR "	2b, 4b				\n"	\
+	"	" __UA_ADDR "	2b + 4, 4b			\n"	\
+	"	.previous"						\
+	: "=r" (__pu_err)						\
+	: "0" (0), "r" (__pu_val), "r" (ptr),				\
+	  "i" (-EFAULT));						\
+}
+
+extern void __put_user_unaligned_unknown(void);
+
+/*
+ * We're generating jump to subroutines which will be outside the range of
+ * jump instructions
+ */
+#ifdef MODULE
+#define __MODULE_JAL(destination)					\
+	".set\tnoat\n\t"						\
+	__UA_LA "\t$1, " #destination "\n\t" 				\
+	"jalr\t$1\n\t"							\
+	".set\tat\n\t"
+#else
+#define __MODULE_JAL(destination)					\
+	"jal\t" #destination "\n\t"
+#endif
+
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+#define DADDI_SCRATCH "$0"
+#else
+#define DADDI_SCRATCH "$3"
+#endif
+
+extern size_t __copy_user(void *__to, const void *__from, size_t __n);
+
+#define __invoke_copy_to_user(to, from, n)				\
+({									\
+	register void __user *__cu_to_r __asm__("$4");			\
+	register const void *__cu_from_r __asm__("$5");			\
+	register long __cu_len_r __asm__("$6");				\
+									\
+	__cu_to_r = (to);						\
+	__cu_from_r = (from);						\
+	__cu_len_r = (n);						\
+	__asm__ __volatile__(						\
+	__MODULE_JAL(__copy_user)					\
+	: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)	\
+	:								\
+	: "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31",		\
+	  DADDI_SCRATCH, "memory");					\
+	__cu_len_r;							\
+})
+
+/*
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define __copy_to_user(to, from, n)					\
+({									\
+	void __user *__cu_to;						\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
+	__cu_len;							\
+})
+
+extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
+
+#define __copy_to_user_inatomic(to, from, n)				\
+({									\
+	void __user *__cu_to;						\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
+	__cu_len;							\
+})
+
+#define __copy_from_user_inatomic(to, from, n)				\
+({									\
+	void *__cu_to;							\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from,	\
+	                                            __cu_len);		\
+	__cu_len;							\
+})
+
+/*
+ * copy_to_user: - Copy a block of data into user space.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define copy_to_user(to, from, n)					\
+({									\
+	void __user *__cu_to;						\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len))			\
+		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
+		                                 __cu_len);		\
+	__cu_len;							\
+})
+
+#define __invoke_copy_from_user(to, from, n)				\
+({									\
+	register void *__cu_to_r __asm__("$4");				\
+	register const void __user *__cu_from_r __asm__("$5");		\
+	register long __cu_len_r __asm__("$6");				\
+									\
+	__cu_to_r = (to);						\
+	__cu_from_r = (from);						\
+	__cu_len_r = (n);						\
+	__asm__ __volatile__(						\
+	".set\tnoreorder\n\t"						\
+	__MODULE_JAL(__copy_user)					\
+	".set\tnoat\n\t"						\
+	__UA_ADDU "\t$1, %1, %2\n\t"					\
+	".set\tat\n\t"							\
+	".set\treorder"							\
+	: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)	\
+	:								\
+	: "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31",		\
+	  DADDI_SCRATCH, "memory");					\
+	__cu_len_r;							\
+})
+
+#define __invoke_copy_from_user_inatomic(to, from, n)			\
+({									\
+	register void *__cu_to_r __asm__("$4");				\
+	register const void __user *__cu_from_r __asm__("$5");		\
+	register long __cu_len_r __asm__("$6");				\
+									\
+	__cu_to_r = (to);						\
+	__cu_from_r = (from);						\
+	__cu_len_r = (n);						\
+	__asm__ __volatile__(						\
+	".set\tnoreorder\n\t"						\
+	__MODULE_JAL(__copy_user_inatomic)				\
+	".set\tnoat\n\t"						\
+	__UA_ADDU "\t$1, %1, %2\n\t"					\
+	".set\tat\n\t"							\
+	".set\treorder"							\
+	: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)	\
+	:								\
+	: "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31",		\
+	  DADDI_SCRATCH, "memory");					\
+	__cu_len_r;							\
+})
+
+/*
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define __copy_from_user(to, from, n)					\
+({									\
+	void *__cu_to;							\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
+	                                   __cu_len);			\
+	__cu_len;							\
+})
+
+/*
+ * copy_from_user: - Copy a block of data from user space.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define copy_from_user(to, from, n)					\
+({									\
+	void *__cu_to;							\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	if (access_ok(VERIFY_READ, __cu_from, __cu_len))		\
+		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
+		                                   __cu_len);		\
+	__cu_len;							\
+})
+
+#define __copy_in_user(to, from, n)	__copy_from_user(to, from, n)
+
+#define copy_in_user(to, from, n)					\
+({									\
+	void __user *__cu_to;						\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) &&	\
+	           access_ok(VERIFY_WRITE, __cu_to, __cu_len)))		\
+		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
+		                                   __cu_len);		\
+	__cu_len;							\
+})
+
+/*
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @n:    Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+static inline __kernel_size_t
+__clear_user(void __user *addr, __kernel_size_t size)
+{
+	__kernel_size_t res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, $0\n\t"
+		"move\t$6, %2\n\t"
+		__MODULE_JAL(__bzero)
+		"move\t%0, $6"
+		: "=r" (res)
+		: "r" (addr), "r" (size)
+		: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+
+	return res;
+}
+
+#define clear_user(addr,n)						\
+({									\
+	void __user * __cl_addr = (addr);				\
+	unsigned long __cl_size = (n);					\
+	if (__cl_size && access_ok(VERIFY_WRITE,			\
+		((unsigned long)(__cl_addr)), __cl_size))		\
+		__cl_size = __clear_user(__cl_addr, __cl_size);		\
+	__cl_size;							\
+})
+
+/*
+ * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ * Caller must check the specified block with access_ok() before calling
+ * this function.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+static inline long
+__strncpy_from_user(char *__to, const char __user *__from, long __len)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		"move\t$6, %3\n\t"
+		__MODULE_JAL(__strncpy_from_user_nocheck_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (__to), "r" (__from), "r" (__len)
+		: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+
+	return res;
+}
+
+/*
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+static inline long
+strncpy_from_user(char *__to, const char __user *__from, long __len)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		"move\t$6, %3\n\t"
+		__MODULE_JAL(__strncpy_from_user_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (__to), "r" (__from), "r" (__len)
+		: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+
+	return res;
+}
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+static inline long __strlen_user(const char __user *s)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		__MODULE_JAL(__strlen_user_nocheck_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s)
+		: "$2", "$4", __UA_t0, "$31");
+
+	return res;
+}
+
+/*
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+static inline long strlen_user(const char __user *s)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		__MODULE_JAL(__strlen_user_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s)
+		: "$2", "$4", __UA_t0, "$31");
+
+	return res;
+}
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+static inline long __strnlen_user(const char __user *s, long n)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		__MODULE_JAL(__strnlen_user_nocheck_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s), "r" (n)
+		: "$2", "$4", "$5", __UA_t0, "$31");
+
+	return res;
+}
+
+/*
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+static inline long strnlen_user(const char __user *s, long n)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		__MODULE_JAL(__strnlen_user_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s), "r" (n)
+		: "$2", "$4", "$5", __UA_t0, "$31");
+
+	return res;
+}
+
+struct exception_table_entry
+{
+	unsigned long insn;
+	unsigned long nextinsn;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/mips/include/asm/ucontext.h b/arch/mips/include/asm/ucontext.h
new file mode 100644
index 0000000..8a4b20e
--- /dev/null
+++ b/arch/mips/include/asm/ucontext.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Low level exception handling
+ *
+ * Copyright (C) 1998, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* _ASM_UCONTEXT_H */
diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h
new file mode 100644
index 0000000..7924049
--- /dev/null
+++ b/arch/mips/include/asm/unaligned.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_MIPS_UNALIGNED_H
+#define _ASM_MIPS_UNALIGNED_H
+
+#include <linux/compiler.h>
+#if defined(__MIPSEB__)
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_be
+# define put_unaligned	__put_unaligned_be
+#elif defined(__MIPSEL__)
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_le
+# define put_unaligned	__put_unaligned_le
+#else
+#  error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#endif /* _ASM_MIPS_UNALIGNED_H */
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
new file mode 100644
index 0000000..a73e153
--- /dev/null
+++ b/arch/mips/include/asm/unistd.h
@@ -0,0 +1,1037 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * Changed system calls macros _syscall5 - _syscall7 to push args 5 to 7 onto
+ * the stack. Robin Farine for ACN S.A, Copyright (C) 1996 by ACN S.A
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Linux o32 style syscalls are in the range from 4000 to 4999.
+ */
+#define __NR_Linux			4000
+#define __NR_syscall			(__NR_Linux +   0)
+#define __NR_exit			(__NR_Linux +   1)
+#define __NR_fork			(__NR_Linux +   2)
+#define __NR_read			(__NR_Linux +   3)
+#define __NR_write			(__NR_Linux +   4)
+#define __NR_open			(__NR_Linux +   5)
+#define __NR_close			(__NR_Linux +   6)
+#define __NR_waitpid			(__NR_Linux +   7)
+#define __NR_creat			(__NR_Linux +   8)
+#define __NR_link			(__NR_Linux +   9)
+#define __NR_unlink			(__NR_Linux +  10)
+#define __NR_execve			(__NR_Linux +  11)
+#define __NR_chdir			(__NR_Linux +  12)
+#define __NR_time			(__NR_Linux +  13)
+#define __NR_mknod			(__NR_Linux +  14)
+#define __NR_chmod			(__NR_Linux +  15)
+#define __NR_lchown			(__NR_Linux +  16)
+#define __NR_break			(__NR_Linux +  17)
+#define __NR_unused18			(__NR_Linux +  18)
+#define __NR_lseek			(__NR_Linux +  19)
+#define __NR_getpid			(__NR_Linux +  20)
+#define __NR_mount			(__NR_Linux +  21)
+#define __NR_umount			(__NR_Linux +  22)
+#define __NR_setuid			(__NR_Linux +  23)
+#define __NR_getuid			(__NR_Linux +  24)
+#define __NR_stime			(__NR_Linux +  25)
+#define __NR_ptrace			(__NR_Linux +  26)
+#define __NR_alarm			(__NR_Linux +  27)
+#define __NR_unused28			(__NR_Linux +  28)
+#define __NR_pause			(__NR_Linux +  29)
+#define __NR_utime			(__NR_Linux +  30)
+#define __NR_stty			(__NR_Linux +  31)
+#define __NR_gtty			(__NR_Linux +  32)
+#define __NR_access			(__NR_Linux +  33)
+#define __NR_nice			(__NR_Linux +  34)
+#define __NR_ftime			(__NR_Linux +  35)
+#define __NR_sync			(__NR_Linux +  36)
+#define __NR_kill			(__NR_Linux +  37)
+#define __NR_rename			(__NR_Linux +  38)
+#define __NR_mkdir			(__NR_Linux +  39)
+#define __NR_rmdir			(__NR_Linux +  40)
+#define __NR_dup			(__NR_Linux +  41)
+#define __NR_pipe			(__NR_Linux +  42)
+#define __NR_times			(__NR_Linux +  43)
+#define __NR_prof			(__NR_Linux +  44)
+#define __NR_brk			(__NR_Linux +  45)
+#define __NR_setgid			(__NR_Linux +  46)
+#define __NR_getgid			(__NR_Linux +  47)
+#define __NR_signal			(__NR_Linux +  48)
+#define __NR_geteuid			(__NR_Linux +  49)
+#define __NR_getegid			(__NR_Linux +  50)
+#define __NR_acct			(__NR_Linux +  51)
+#define __NR_umount2			(__NR_Linux +  52)
+#define __NR_lock			(__NR_Linux +  53)
+#define __NR_ioctl			(__NR_Linux +  54)
+#define __NR_fcntl			(__NR_Linux +  55)
+#define __NR_mpx			(__NR_Linux +  56)
+#define __NR_setpgid			(__NR_Linux +  57)
+#define __NR_ulimit			(__NR_Linux +  58)
+#define __NR_unused59			(__NR_Linux +  59)
+#define __NR_umask			(__NR_Linux +  60)
+#define __NR_chroot			(__NR_Linux +  61)
+#define __NR_ustat			(__NR_Linux +  62)
+#define __NR_dup2			(__NR_Linux +  63)
+#define __NR_getppid			(__NR_Linux +  64)
+#define __NR_getpgrp			(__NR_Linux +  65)
+#define __NR_setsid			(__NR_Linux +  66)
+#define __NR_sigaction			(__NR_Linux +  67)
+#define __NR_sgetmask			(__NR_Linux +  68)
+#define __NR_ssetmask			(__NR_Linux +  69)
+#define __NR_setreuid			(__NR_Linux +  70)
+#define __NR_setregid			(__NR_Linux +  71)
+#define __NR_sigsuspend			(__NR_Linux +  72)
+#define __NR_sigpending			(__NR_Linux +  73)
+#define __NR_sethostname		(__NR_Linux +  74)
+#define __NR_setrlimit			(__NR_Linux +  75)
+#define __NR_getrlimit			(__NR_Linux +  76)
+#define __NR_getrusage			(__NR_Linux +  77)
+#define __NR_gettimeofday		(__NR_Linux +  78)
+#define __NR_settimeofday		(__NR_Linux +  79)
+#define __NR_getgroups			(__NR_Linux +  80)
+#define __NR_setgroups			(__NR_Linux +  81)
+#define __NR_reserved82			(__NR_Linux +  82)
+#define __NR_symlink			(__NR_Linux +  83)
+#define __NR_unused84			(__NR_Linux +  84)
+#define __NR_readlink			(__NR_Linux +  85)
+#define __NR_uselib			(__NR_Linux +  86)
+#define __NR_swapon			(__NR_Linux +  87)
+#define __NR_reboot			(__NR_Linux +  88)
+#define __NR_readdir			(__NR_Linux +  89)
+#define __NR_mmap			(__NR_Linux +  90)
+#define __NR_munmap			(__NR_Linux +  91)
+#define __NR_truncate			(__NR_Linux +  92)
+#define __NR_ftruncate			(__NR_Linux +  93)
+#define __NR_fchmod			(__NR_Linux +  94)
+#define __NR_fchown			(__NR_Linux +  95)
+#define __NR_getpriority		(__NR_Linux +  96)
+#define __NR_setpriority		(__NR_Linux +  97)
+#define __NR_profil			(__NR_Linux +  98)
+#define __NR_statfs			(__NR_Linux +  99)
+#define __NR_fstatfs			(__NR_Linux + 100)
+#define __NR_ioperm			(__NR_Linux + 101)
+#define __NR_socketcall			(__NR_Linux + 102)
+#define __NR_syslog			(__NR_Linux + 103)
+#define __NR_setitimer			(__NR_Linux + 104)
+#define __NR_getitimer			(__NR_Linux + 105)
+#define __NR_stat			(__NR_Linux + 106)
+#define __NR_lstat			(__NR_Linux + 107)
+#define __NR_fstat			(__NR_Linux + 108)
+#define __NR_unused109			(__NR_Linux + 109)
+#define __NR_iopl			(__NR_Linux + 110)
+#define __NR_vhangup			(__NR_Linux + 111)
+#define __NR_idle			(__NR_Linux + 112)
+#define __NR_vm86			(__NR_Linux + 113)
+#define __NR_wait4			(__NR_Linux + 114)
+#define __NR_swapoff			(__NR_Linux + 115)
+#define __NR_sysinfo			(__NR_Linux + 116)
+#define __NR_ipc			(__NR_Linux + 117)
+#define __NR_fsync			(__NR_Linux + 118)
+#define __NR_sigreturn			(__NR_Linux + 119)
+#define __NR_clone			(__NR_Linux + 120)
+#define __NR_setdomainname		(__NR_Linux + 121)
+#define __NR_uname			(__NR_Linux + 122)
+#define __NR_modify_ldt			(__NR_Linux + 123)
+#define __NR_adjtimex			(__NR_Linux + 124)
+#define __NR_mprotect			(__NR_Linux + 125)
+#define __NR_sigprocmask		(__NR_Linux + 126)
+#define __NR_create_module		(__NR_Linux + 127)
+#define __NR_init_module		(__NR_Linux + 128)
+#define __NR_delete_module		(__NR_Linux + 129)
+#define __NR_get_kernel_syms		(__NR_Linux + 130)
+#define __NR_quotactl			(__NR_Linux + 131)
+#define __NR_getpgid			(__NR_Linux + 132)
+#define __NR_fchdir			(__NR_Linux + 133)
+#define __NR_bdflush			(__NR_Linux + 134)
+#define __NR_sysfs			(__NR_Linux + 135)
+#define __NR_personality		(__NR_Linux + 136)
+#define __NR_afs_syscall		(__NR_Linux + 137) /* Syscall for Andrew File System */
+#define __NR_setfsuid			(__NR_Linux + 138)
+#define __NR_setfsgid			(__NR_Linux + 139)
+#define __NR__llseek			(__NR_Linux + 140)
+#define __NR_getdents			(__NR_Linux + 141)
+#define __NR__newselect			(__NR_Linux + 142)
+#define __NR_flock			(__NR_Linux + 143)
+#define __NR_msync			(__NR_Linux + 144)
+#define __NR_readv			(__NR_Linux + 145)
+#define __NR_writev			(__NR_Linux + 146)
+#define __NR_cacheflush			(__NR_Linux + 147)
+#define __NR_cachectl			(__NR_Linux + 148)
+#define __NR_sysmips			(__NR_Linux + 149)
+#define __NR_unused150			(__NR_Linux + 150)
+#define __NR_getsid			(__NR_Linux + 151)
+#define __NR_fdatasync			(__NR_Linux + 152)
+#define __NR__sysctl			(__NR_Linux + 153)
+#define __NR_mlock			(__NR_Linux + 154)
+#define __NR_munlock			(__NR_Linux + 155)
+#define __NR_mlockall			(__NR_Linux + 156)
+#define __NR_munlockall			(__NR_Linux + 157)
+#define __NR_sched_setparam		(__NR_Linux + 158)
+#define __NR_sched_getparam		(__NR_Linux + 159)
+#define __NR_sched_setscheduler		(__NR_Linux + 160)
+#define __NR_sched_getscheduler		(__NR_Linux + 161)
+#define __NR_sched_yield		(__NR_Linux + 162)
+#define __NR_sched_get_priority_max	(__NR_Linux + 163)
+#define __NR_sched_get_priority_min	(__NR_Linux + 164)
+#define __NR_sched_rr_get_interval	(__NR_Linux + 165)
+#define __NR_nanosleep			(__NR_Linux + 166)
+#define __NR_mremap			(__NR_Linux + 167)
+#define __NR_accept			(__NR_Linux + 168)
+#define __NR_bind			(__NR_Linux + 169)
+#define __NR_connect			(__NR_Linux + 170)
+#define __NR_getpeername		(__NR_Linux + 171)
+#define __NR_getsockname		(__NR_Linux + 172)
+#define __NR_getsockopt			(__NR_Linux + 173)
+#define __NR_listen			(__NR_Linux + 174)
+#define __NR_recv			(__NR_Linux + 175)
+#define __NR_recvfrom			(__NR_Linux + 176)
+#define __NR_recvmsg			(__NR_Linux + 177)
+#define __NR_send			(__NR_Linux + 178)
+#define __NR_sendmsg			(__NR_Linux + 179)
+#define __NR_sendto			(__NR_Linux + 180)
+#define __NR_setsockopt			(__NR_Linux + 181)
+#define __NR_shutdown			(__NR_Linux + 182)
+#define __NR_socket			(__NR_Linux + 183)
+#define __NR_socketpair			(__NR_Linux + 184)
+#define __NR_setresuid			(__NR_Linux + 185)
+#define __NR_getresuid			(__NR_Linux + 186)
+#define __NR_query_module		(__NR_Linux + 187)
+#define __NR_poll			(__NR_Linux + 188)
+#define __NR_nfsservctl			(__NR_Linux + 189)
+#define __NR_setresgid			(__NR_Linux + 190)
+#define __NR_getresgid			(__NR_Linux + 191)
+#define __NR_prctl			(__NR_Linux + 192)
+#define __NR_rt_sigreturn		(__NR_Linux + 193)
+#define __NR_rt_sigaction		(__NR_Linux + 194)
+#define __NR_rt_sigprocmask		(__NR_Linux + 195)
+#define __NR_rt_sigpending		(__NR_Linux + 196)
+#define __NR_rt_sigtimedwait		(__NR_Linux + 197)
+#define __NR_rt_sigqueueinfo		(__NR_Linux + 198)
+#define __NR_rt_sigsuspend		(__NR_Linux + 199)
+#define __NR_pread64			(__NR_Linux + 200)
+#define __NR_pwrite64			(__NR_Linux + 201)
+#define __NR_chown			(__NR_Linux + 202)
+#define __NR_getcwd			(__NR_Linux + 203)
+#define __NR_capget			(__NR_Linux + 204)
+#define __NR_capset			(__NR_Linux + 205)
+#define __NR_sigaltstack		(__NR_Linux + 206)
+#define __NR_sendfile			(__NR_Linux + 207)
+#define __NR_getpmsg			(__NR_Linux + 208)
+#define __NR_putpmsg			(__NR_Linux + 209)
+#define __NR_mmap2			(__NR_Linux + 210)
+#define __NR_truncate64			(__NR_Linux + 211)
+#define __NR_ftruncate64		(__NR_Linux + 212)
+#define __NR_stat64			(__NR_Linux + 213)
+#define __NR_lstat64			(__NR_Linux + 214)
+#define __NR_fstat64			(__NR_Linux + 215)
+#define __NR_pivot_root			(__NR_Linux + 216)
+#define __NR_mincore			(__NR_Linux + 217)
+#define __NR_madvise			(__NR_Linux + 218)
+#define __NR_getdents64			(__NR_Linux + 219)
+#define __NR_fcntl64			(__NR_Linux + 220)
+#define __NR_reserved221		(__NR_Linux + 221)
+#define __NR_gettid			(__NR_Linux + 222)
+#define __NR_readahead			(__NR_Linux + 223)
+#define __NR_setxattr			(__NR_Linux + 224)
+#define __NR_lsetxattr			(__NR_Linux + 225)
+#define __NR_fsetxattr			(__NR_Linux + 226)
+#define __NR_getxattr			(__NR_Linux + 227)
+#define __NR_lgetxattr			(__NR_Linux + 228)
+#define __NR_fgetxattr			(__NR_Linux + 229)
+#define __NR_listxattr			(__NR_Linux + 230)
+#define __NR_llistxattr			(__NR_Linux + 231)
+#define __NR_flistxattr			(__NR_Linux + 232)
+#define __NR_removexattr		(__NR_Linux + 233)
+#define __NR_lremovexattr		(__NR_Linux + 234)
+#define __NR_fremovexattr		(__NR_Linux + 235)
+#define __NR_tkill			(__NR_Linux + 236)
+#define __NR_sendfile64			(__NR_Linux + 237)
+#define __NR_futex			(__NR_Linux + 238)
+#define __NR_sched_setaffinity		(__NR_Linux + 239)
+#define __NR_sched_getaffinity		(__NR_Linux + 240)
+#define __NR_io_setup			(__NR_Linux + 241)
+#define __NR_io_destroy			(__NR_Linux + 242)
+#define __NR_io_getevents		(__NR_Linux + 243)
+#define __NR_io_submit			(__NR_Linux + 244)
+#define __NR_io_cancel			(__NR_Linux + 245)
+#define __NR_exit_group			(__NR_Linux + 246)
+#define __NR_lookup_dcookie		(__NR_Linux + 247)
+#define __NR_epoll_create		(__NR_Linux + 248)
+#define __NR_epoll_ctl			(__NR_Linux + 249)
+#define __NR_epoll_wait			(__NR_Linux + 250)
+#define __NR_remap_file_pages		(__NR_Linux + 251)
+#define __NR_set_tid_address		(__NR_Linux + 252)
+#define __NR_restart_syscall		(__NR_Linux + 253)
+#define __NR_fadvise64			(__NR_Linux + 254)
+#define __NR_statfs64			(__NR_Linux + 255)
+#define __NR_fstatfs64			(__NR_Linux + 256)
+#define __NR_timer_create		(__NR_Linux + 257)
+#define __NR_timer_settime		(__NR_Linux + 258)
+#define __NR_timer_gettime		(__NR_Linux + 259)
+#define __NR_timer_getoverrun		(__NR_Linux + 260)
+#define __NR_timer_delete		(__NR_Linux + 261)
+#define __NR_clock_settime		(__NR_Linux + 262)
+#define __NR_clock_gettime		(__NR_Linux + 263)
+#define __NR_clock_getres		(__NR_Linux + 264)
+#define __NR_clock_nanosleep		(__NR_Linux + 265)
+#define __NR_tgkill			(__NR_Linux + 266)
+#define __NR_utimes			(__NR_Linux + 267)
+#define __NR_mbind			(__NR_Linux + 268)
+#define __NR_get_mempolicy		(__NR_Linux + 269)
+#define __NR_set_mempolicy		(__NR_Linux + 270)
+#define __NR_mq_open			(__NR_Linux + 271)
+#define __NR_mq_unlink			(__NR_Linux + 272)
+#define __NR_mq_timedsend		(__NR_Linux + 273)
+#define __NR_mq_timedreceive		(__NR_Linux + 274)
+#define __NR_mq_notify			(__NR_Linux + 275)
+#define __NR_mq_getsetattr		(__NR_Linux + 276)
+#define __NR_vserver			(__NR_Linux + 277)
+#define __NR_waitid			(__NR_Linux + 278)
+/* #define __NR_sys_setaltroot		(__NR_Linux + 279) */
+#define __NR_add_key			(__NR_Linux + 280)
+#define __NR_request_key		(__NR_Linux + 281)
+#define __NR_keyctl			(__NR_Linux + 282)
+#define __NR_set_thread_area		(__NR_Linux + 283)
+#define __NR_inotify_init		(__NR_Linux + 284)
+#define __NR_inotify_add_watch		(__NR_Linux + 285)
+#define __NR_inotify_rm_watch		(__NR_Linux + 286)
+#define __NR_migrate_pages		(__NR_Linux + 287)
+#define __NR_openat			(__NR_Linux + 288)
+#define __NR_mkdirat			(__NR_Linux + 289)
+#define __NR_mknodat			(__NR_Linux + 290)
+#define __NR_fchownat			(__NR_Linux + 291)
+#define __NR_futimesat			(__NR_Linux + 292)
+#define __NR_fstatat64			(__NR_Linux + 293)
+#define __NR_unlinkat			(__NR_Linux + 294)
+#define __NR_renameat			(__NR_Linux + 295)
+#define __NR_linkat			(__NR_Linux + 296)
+#define __NR_symlinkat			(__NR_Linux + 297)
+#define __NR_readlinkat			(__NR_Linux + 298)
+#define __NR_fchmodat			(__NR_Linux + 299)
+#define __NR_faccessat			(__NR_Linux + 300)
+#define __NR_pselect6			(__NR_Linux + 301)
+#define __NR_ppoll			(__NR_Linux + 302)
+#define __NR_unshare			(__NR_Linux + 303)
+#define __NR_splice			(__NR_Linux + 304)
+#define __NR_sync_file_range		(__NR_Linux + 305)
+#define __NR_tee			(__NR_Linux + 306)
+#define __NR_vmsplice			(__NR_Linux + 307)
+#define __NR_move_pages			(__NR_Linux + 308)
+#define __NR_set_robust_list		(__NR_Linux + 309)
+#define __NR_get_robust_list		(__NR_Linux + 310)
+#define __NR_kexec_load			(__NR_Linux + 311)
+#define __NR_getcpu			(__NR_Linux + 312)
+#define __NR_epoll_pwait		(__NR_Linux + 313)
+#define __NR_ioprio_set			(__NR_Linux + 314)
+#define __NR_ioprio_get			(__NR_Linux + 315)
+#define __NR_utimensat			(__NR_Linux + 316)
+#define __NR_signalfd			(__NR_Linux + 317)
+#define __NR_timerfd			(__NR_Linux + 318)
+#define __NR_eventfd			(__NR_Linux + 319)
+#define __NR_fallocate			(__NR_Linux + 320)
+#define __NR_timerfd_create		(__NR_Linux + 321)
+#define __NR_timerfd_gettime		(__NR_Linux + 322)
+#define __NR_timerfd_settime		(__NR_Linux + 323)
+#define __NR_signalfd4			(__NR_Linux + 324)
+#define __NR_eventfd2			(__NR_Linux + 325)
+#define __NR_epoll_create1		(__NR_Linux + 326)
+#define __NR_dup3			(__NR_Linux + 327)
+#define __NR_pipe2			(__NR_Linux + 328)
+#define __NR_inotify_init1		(__NR_Linux + 329)
+
+/*
+ * Offset of the last Linux o32 flavoured syscall
+ */
+#define __NR_Linux_syscalls		329
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#define __NR_O32_Linux			4000
+#define __NR_O32_Linux_syscalls		329
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+/*
+ * Linux 64-bit syscalls are in the range from 5000 to 5999.
+ */
+#define __NR_Linux			5000
+#define __NR_read			(__NR_Linux +   0)
+#define __NR_write			(__NR_Linux +   1)
+#define __NR_open			(__NR_Linux +   2)
+#define __NR_close			(__NR_Linux +   3)
+#define __NR_stat			(__NR_Linux +   4)
+#define __NR_fstat			(__NR_Linux +   5)
+#define __NR_lstat			(__NR_Linux +   6)
+#define __NR_poll			(__NR_Linux +   7)
+#define __NR_lseek			(__NR_Linux +   8)
+#define __NR_mmap			(__NR_Linux +   9)
+#define __NR_mprotect			(__NR_Linux +  10)
+#define __NR_munmap			(__NR_Linux +  11)
+#define __NR_brk			(__NR_Linux +  12)
+#define __NR_rt_sigaction		(__NR_Linux +  13)
+#define __NR_rt_sigprocmask		(__NR_Linux +  14)
+#define __NR_ioctl			(__NR_Linux +  15)
+#define __NR_pread64			(__NR_Linux +  16)
+#define __NR_pwrite64			(__NR_Linux +  17)
+#define __NR_readv			(__NR_Linux +  18)
+#define __NR_writev			(__NR_Linux +  19)
+#define __NR_access			(__NR_Linux +  20)
+#define __NR_pipe			(__NR_Linux +  21)
+#define __NR__newselect			(__NR_Linux +  22)
+#define __NR_sched_yield		(__NR_Linux +  23)
+#define __NR_mremap			(__NR_Linux +  24)
+#define __NR_msync			(__NR_Linux +  25)
+#define __NR_mincore			(__NR_Linux +  26)
+#define __NR_madvise			(__NR_Linux +  27)
+#define __NR_shmget			(__NR_Linux +  28)
+#define __NR_shmat			(__NR_Linux +  29)
+#define __NR_shmctl			(__NR_Linux +  30)
+#define __NR_dup			(__NR_Linux +  31)
+#define __NR_dup2			(__NR_Linux +  32)
+#define __NR_pause			(__NR_Linux +  33)
+#define __NR_nanosleep			(__NR_Linux +  34)
+#define __NR_getitimer			(__NR_Linux +  35)
+#define __NR_setitimer			(__NR_Linux +  36)
+#define __NR_alarm			(__NR_Linux +  37)
+#define __NR_getpid			(__NR_Linux +  38)
+#define __NR_sendfile			(__NR_Linux +  39)
+#define __NR_socket			(__NR_Linux +  40)
+#define __NR_connect			(__NR_Linux +  41)
+#define __NR_accept			(__NR_Linux +  42)
+#define __NR_sendto			(__NR_Linux +  43)
+#define __NR_recvfrom			(__NR_Linux +  44)
+#define __NR_sendmsg			(__NR_Linux +  45)
+#define __NR_recvmsg			(__NR_Linux +  46)
+#define __NR_shutdown			(__NR_Linux +  47)
+#define __NR_bind			(__NR_Linux +  48)
+#define __NR_listen			(__NR_Linux +  49)
+#define __NR_getsockname		(__NR_Linux +  50)
+#define __NR_getpeername		(__NR_Linux +  51)
+#define __NR_socketpair			(__NR_Linux +  52)
+#define __NR_setsockopt			(__NR_Linux +  53)
+#define __NR_getsockopt			(__NR_Linux +  54)
+#define __NR_clone			(__NR_Linux +  55)
+#define __NR_fork			(__NR_Linux +  56)
+#define __NR_execve			(__NR_Linux +  57)
+#define __NR_exit			(__NR_Linux +  58)
+#define __NR_wait4			(__NR_Linux +  59)
+#define __NR_kill			(__NR_Linux +  60)
+#define __NR_uname			(__NR_Linux +  61)
+#define __NR_semget			(__NR_Linux +  62)
+#define __NR_semop			(__NR_Linux +  63)
+#define __NR_semctl			(__NR_Linux +  64)
+#define __NR_shmdt			(__NR_Linux +  65)
+#define __NR_msgget			(__NR_Linux +  66)
+#define __NR_msgsnd			(__NR_Linux +  67)
+#define __NR_msgrcv			(__NR_Linux +  68)
+#define __NR_msgctl			(__NR_Linux +  69)
+#define __NR_fcntl			(__NR_Linux +  70)
+#define __NR_flock			(__NR_Linux +  71)
+#define __NR_fsync			(__NR_Linux +  72)
+#define __NR_fdatasync			(__NR_Linux +  73)
+#define __NR_truncate			(__NR_Linux +  74)
+#define __NR_ftruncate			(__NR_Linux +  75)
+#define __NR_getdents			(__NR_Linux +  76)
+#define __NR_getcwd			(__NR_Linux +  77)
+#define __NR_chdir			(__NR_Linux +  78)
+#define __NR_fchdir			(__NR_Linux +  79)
+#define __NR_rename			(__NR_Linux +  80)
+#define __NR_mkdir			(__NR_Linux +  81)
+#define __NR_rmdir			(__NR_Linux +  82)
+#define __NR_creat			(__NR_Linux +  83)
+#define __NR_link			(__NR_Linux +  84)
+#define __NR_unlink			(__NR_Linux +  85)
+#define __NR_symlink			(__NR_Linux +  86)
+#define __NR_readlink			(__NR_Linux +  87)
+#define __NR_chmod			(__NR_Linux +  88)
+#define __NR_fchmod			(__NR_Linux +  89)
+#define __NR_chown			(__NR_Linux +  90)
+#define __NR_fchown			(__NR_Linux +  91)
+#define __NR_lchown			(__NR_Linux +  92)
+#define __NR_umask			(__NR_Linux +  93)
+#define __NR_gettimeofday		(__NR_Linux +  94)
+#define __NR_getrlimit			(__NR_Linux +  95)
+#define __NR_getrusage			(__NR_Linux +  96)
+#define __NR_sysinfo			(__NR_Linux +  97)
+#define __NR_times			(__NR_Linux +  98)
+#define __NR_ptrace			(__NR_Linux +  99)
+#define __NR_getuid			(__NR_Linux + 100)
+#define __NR_syslog			(__NR_Linux + 101)
+#define __NR_getgid			(__NR_Linux + 102)
+#define __NR_setuid			(__NR_Linux + 103)
+#define __NR_setgid			(__NR_Linux + 104)
+#define __NR_geteuid			(__NR_Linux + 105)
+#define __NR_getegid			(__NR_Linux + 106)
+#define __NR_setpgid			(__NR_Linux + 107)
+#define __NR_getppid			(__NR_Linux + 108)
+#define __NR_getpgrp			(__NR_Linux + 109)
+#define __NR_setsid			(__NR_Linux + 110)
+#define __NR_setreuid			(__NR_Linux + 111)
+#define __NR_setregid			(__NR_Linux + 112)
+#define __NR_getgroups			(__NR_Linux + 113)
+#define __NR_setgroups			(__NR_Linux + 114)
+#define __NR_setresuid			(__NR_Linux + 115)
+#define __NR_getresuid			(__NR_Linux + 116)
+#define __NR_setresgid			(__NR_Linux + 117)
+#define __NR_getresgid			(__NR_Linux + 118)
+#define __NR_getpgid			(__NR_Linux + 119)
+#define __NR_setfsuid			(__NR_Linux + 120)
+#define __NR_setfsgid			(__NR_Linux + 121)
+#define __NR_getsid			(__NR_Linux + 122)
+#define __NR_capget			(__NR_Linux + 123)
+#define __NR_capset			(__NR_Linux + 124)
+#define __NR_rt_sigpending		(__NR_Linux + 125)
+#define __NR_rt_sigtimedwait		(__NR_Linux + 126)
+#define __NR_rt_sigqueueinfo		(__NR_Linux + 127)
+#define __NR_rt_sigsuspend		(__NR_Linux + 128)
+#define __NR_sigaltstack		(__NR_Linux + 129)
+#define __NR_utime			(__NR_Linux + 130)
+#define __NR_mknod			(__NR_Linux + 131)
+#define __NR_personality		(__NR_Linux + 132)
+#define __NR_ustat			(__NR_Linux + 133)
+#define __NR_statfs			(__NR_Linux + 134)
+#define __NR_fstatfs			(__NR_Linux + 135)
+#define __NR_sysfs			(__NR_Linux + 136)
+#define __NR_getpriority		(__NR_Linux + 137)
+#define __NR_setpriority		(__NR_Linux + 138)
+#define __NR_sched_setparam		(__NR_Linux + 139)
+#define __NR_sched_getparam		(__NR_Linux + 140)
+#define __NR_sched_setscheduler		(__NR_Linux + 141)
+#define __NR_sched_getscheduler		(__NR_Linux + 142)
+#define __NR_sched_get_priority_max	(__NR_Linux + 143)
+#define __NR_sched_get_priority_min	(__NR_Linux + 144)
+#define __NR_sched_rr_get_interval	(__NR_Linux + 145)
+#define __NR_mlock			(__NR_Linux + 146)
+#define __NR_munlock			(__NR_Linux + 147)
+#define __NR_mlockall			(__NR_Linux + 148)
+#define __NR_munlockall			(__NR_Linux + 149)
+#define __NR_vhangup			(__NR_Linux + 150)
+#define __NR_pivot_root			(__NR_Linux + 151)
+#define __NR__sysctl			(__NR_Linux + 152)
+#define __NR_prctl			(__NR_Linux + 153)
+#define __NR_adjtimex			(__NR_Linux + 154)
+#define __NR_setrlimit			(__NR_Linux + 155)
+#define __NR_chroot			(__NR_Linux + 156)
+#define __NR_sync			(__NR_Linux + 157)
+#define __NR_acct			(__NR_Linux + 158)
+#define __NR_settimeofday		(__NR_Linux + 159)
+#define __NR_mount			(__NR_Linux + 160)
+#define __NR_umount2			(__NR_Linux + 161)
+#define __NR_swapon			(__NR_Linux + 162)
+#define __NR_swapoff			(__NR_Linux + 163)
+#define __NR_reboot			(__NR_Linux + 164)
+#define __NR_sethostname		(__NR_Linux + 165)
+#define __NR_setdomainname		(__NR_Linux + 166)
+#define __NR_create_module		(__NR_Linux + 167)
+#define __NR_init_module		(__NR_Linux + 168)
+#define __NR_delete_module		(__NR_Linux + 169)
+#define __NR_get_kernel_syms		(__NR_Linux + 170)
+#define __NR_query_module		(__NR_Linux + 171)
+#define __NR_quotactl			(__NR_Linux + 172)
+#define __NR_nfsservctl			(__NR_Linux + 173)
+#define __NR_getpmsg			(__NR_Linux + 174)
+#define __NR_putpmsg			(__NR_Linux + 175)
+#define __NR_afs_syscall		(__NR_Linux + 176)
+#define __NR_reserved177		(__NR_Linux + 177)
+#define __NR_gettid			(__NR_Linux + 178)
+#define __NR_readahead			(__NR_Linux + 179)
+#define __NR_setxattr			(__NR_Linux + 180)
+#define __NR_lsetxattr			(__NR_Linux + 181)
+#define __NR_fsetxattr			(__NR_Linux + 182)
+#define __NR_getxattr			(__NR_Linux + 183)
+#define __NR_lgetxattr			(__NR_Linux + 184)
+#define __NR_fgetxattr			(__NR_Linux + 185)
+#define __NR_listxattr			(__NR_Linux + 186)
+#define __NR_llistxattr			(__NR_Linux + 187)
+#define __NR_flistxattr			(__NR_Linux + 188)
+#define __NR_removexattr		(__NR_Linux + 189)
+#define __NR_lremovexattr		(__NR_Linux + 190)
+#define __NR_fremovexattr		(__NR_Linux + 191)
+#define __NR_tkill			(__NR_Linux + 192)
+#define __NR_reserved193		(__NR_Linux + 193)
+#define __NR_futex			(__NR_Linux + 194)
+#define __NR_sched_setaffinity		(__NR_Linux + 195)
+#define __NR_sched_getaffinity		(__NR_Linux + 196)
+#define __NR_cacheflush			(__NR_Linux + 197)
+#define __NR_cachectl			(__NR_Linux + 198)
+#define __NR_sysmips			(__NR_Linux + 199)
+#define __NR_io_setup			(__NR_Linux + 200)
+#define __NR_io_destroy			(__NR_Linux + 201)
+#define __NR_io_getevents		(__NR_Linux + 202)
+#define __NR_io_submit			(__NR_Linux + 203)
+#define __NR_io_cancel			(__NR_Linux + 204)
+#define __NR_exit_group			(__NR_Linux + 205)
+#define __NR_lookup_dcookie		(__NR_Linux + 206)
+#define __NR_epoll_create		(__NR_Linux + 207)
+#define __NR_epoll_ctl			(__NR_Linux + 208)
+#define __NR_epoll_wait			(__NR_Linux + 209)
+#define __NR_remap_file_pages		(__NR_Linux + 210)
+#define __NR_rt_sigreturn		(__NR_Linux + 211)
+#define __NR_set_tid_address		(__NR_Linux + 212)
+#define __NR_restart_syscall		(__NR_Linux + 213)
+#define __NR_semtimedop			(__NR_Linux + 214)
+#define __NR_fadvise64			(__NR_Linux + 215)
+#define __NR_timer_create		(__NR_Linux + 216)
+#define __NR_timer_settime		(__NR_Linux + 217)
+#define __NR_timer_gettime		(__NR_Linux + 218)
+#define __NR_timer_getoverrun		(__NR_Linux + 219)
+#define __NR_timer_delete		(__NR_Linux + 220)
+#define __NR_clock_settime		(__NR_Linux + 221)
+#define __NR_clock_gettime		(__NR_Linux + 222)
+#define __NR_clock_getres		(__NR_Linux + 223)
+#define __NR_clock_nanosleep		(__NR_Linux + 224)
+#define __NR_tgkill			(__NR_Linux + 225)
+#define __NR_utimes			(__NR_Linux + 226)
+#define __NR_mbind			(__NR_Linux + 227)
+#define __NR_get_mempolicy		(__NR_Linux + 228)
+#define __NR_set_mempolicy		(__NR_Linux + 229)
+#define __NR_mq_open			(__NR_Linux + 230)
+#define __NR_mq_unlink			(__NR_Linux + 231)
+#define __NR_mq_timedsend		(__NR_Linux + 232)
+#define __NR_mq_timedreceive		(__NR_Linux + 233)
+#define __NR_mq_notify			(__NR_Linux + 234)
+#define __NR_mq_getsetattr		(__NR_Linux + 235)
+#define __NR_vserver			(__NR_Linux + 236)
+#define __NR_waitid			(__NR_Linux + 237)
+/* #define __NR_sys_setaltroot		(__NR_Linux + 238) */
+#define __NR_add_key			(__NR_Linux + 239)
+#define __NR_request_key		(__NR_Linux + 240)
+#define __NR_keyctl			(__NR_Linux + 241)
+#define __NR_set_thread_area		(__NR_Linux + 242)
+#define __NR_inotify_init		(__NR_Linux + 243)
+#define __NR_inotify_add_watch		(__NR_Linux + 244)
+#define __NR_inotify_rm_watch		(__NR_Linux + 245)
+#define __NR_migrate_pages		(__NR_Linux + 246)
+#define __NR_openat			(__NR_Linux + 247)
+#define __NR_mkdirat			(__NR_Linux + 248)
+#define __NR_mknodat			(__NR_Linux + 249)
+#define __NR_fchownat			(__NR_Linux + 250)
+#define __NR_futimesat			(__NR_Linux + 251)
+#define __NR_newfstatat			(__NR_Linux + 252)
+#define __NR_unlinkat			(__NR_Linux + 253)
+#define __NR_renameat			(__NR_Linux + 254)
+#define __NR_linkat			(__NR_Linux + 255)
+#define __NR_symlinkat			(__NR_Linux + 256)
+#define __NR_readlinkat			(__NR_Linux + 257)
+#define __NR_fchmodat			(__NR_Linux + 258)
+#define __NR_faccessat			(__NR_Linux + 259)
+#define __NR_pselect6			(__NR_Linux + 260)
+#define __NR_ppoll			(__NR_Linux + 261)
+#define __NR_unshare			(__NR_Linux + 262)
+#define __NR_splice			(__NR_Linux + 263)
+#define __NR_sync_file_range		(__NR_Linux + 264)
+#define __NR_tee			(__NR_Linux + 265)
+#define __NR_vmsplice			(__NR_Linux + 266)
+#define __NR_move_pages			(__NR_Linux + 267)
+#define __NR_set_robust_list		(__NR_Linux + 268)
+#define __NR_get_robust_list		(__NR_Linux + 269)
+#define __NR_kexec_load			(__NR_Linux + 270)
+#define __NR_getcpu			(__NR_Linux + 271)
+#define __NR_epoll_pwait		(__NR_Linux + 272)
+#define __NR_ioprio_set			(__NR_Linux + 273)
+#define __NR_ioprio_get			(__NR_Linux + 274)
+#define __NR_utimensat			(__NR_Linux + 275)
+#define __NR_signalfd			(__NR_Linux + 276)
+#define __NR_timerfd			(__NR_Linux + 277)
+#define __NR_eventfd			(__NR_Linux + 278)
+#define __NR_fallocate			(__NR_Linux + 279)
+#define __NR_timerfd_create		(__NR_Linux + 280)
+#define __NR_timerfd_gettime		(__NR_Linux + 281)
+#define __NR_timerfd_settime		(__NR_Linux + 282)
+#define __NR_signalfd4			(__NR_Linux + 283)
+#define __NR_eventfd2			(__NR_Linux + 284)
+#define __NR_epoll_create1		(__NR_Linux + 285)
+#define __NR_dup3			(__NR_Linux + 286)
+#define __NR_pipe2			(__NR_Linux + 287)
+#define __NR_inotify_init1		(__NR_Linux + 288)
+
+/*
+ * Offset of the last Linux 64-bit flavoured syscall
+ */
+#define __NR_Linux_syscalls		288
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#define __NR_64_Linux			5000
+#define __NR_64_Linux_syscalls		288
+
+#if _MIPS_SIM == _MIPS_SIM_NABI32
+
+/*
+ * Linux N32 syscalls are in the range from 6000 to 6999.
+ */
+#define __NR_Linux			6000
+#define __NR_read			(__NR_Linux +   0)
+#define __NR_write			(__NR_Linux +   1)
+#define __NR_open			(__NR_Linux +   2)
+#define __NR_close			(__NR_Linux +   3)
+#define __NR_stat			(__NR_Linux +   4)
+#define __NR_fstat			(__NR_Linux +   5)
+#define __NR_lstat			(__NR_Linux +   6)
+#define __NR_poll			(__NR_Linux +   7)
+#define __NR_lseek			(__NR_Linux +   8)
+#define __NR_mmap			(__NR_Linux +   9)
+#define __NR_mprotect			(__NR_Linux +  10)
+#define __NR_munmap			(__NR_Linux +  11)
+#define __NR_brk			(__NR_Linux +  12)
+#define __NR_rt_sigaction		(__NR_Linux +  13)
+#define __NR_rt_sigprocmask		(__NR_Linux +  14)
+#define __NR_ioctl			(__NR_Linux +  15)
+#define __NR_pread64			(__NR_Linux +  16)
+#define __NR_pwrite64			(__NR_Linux +  17)
+#define __NR_readv			(__NR_Linux +  18)
+#define __NR_writev			(__NR_Linux +  19)
+#define __NR_access			(__NR_Linux +  20)
+#define __NR_pipe			(__NR_Linux +  21)
+#define __NR__newselect			(__NR_Linux +  22)
+#define __NR_sched_yield		(__NR_Linux +  23)
+#define __NR_mremap			(__NR_Linux +  24)
+#define __NR_msync			(__NR_Linux +  25)
+#define __NR_mincore			(__NR_Linux +  26)
+#define __NR_madvise			(__NR_Linux +  27)
+#define __NR_shmget			(__NR_Linux +  28)
+#define __NR_shmat			(__NR_Linux +  29)
+#define __NR_shmctl			(__NR_Linux +  30)
+#define __NR_dup			(__NR_Linux +  31)
+#define __NR_dup2			(__NR_Linux +  32)
+#define __NR_pause			(__NR_Linux +  33)
+#define __NR_nanosleep			(__NR_Linux +  34)
+#define __NR_getitimer			(__NR_Linux +  35)
+#define __NR_setitimer			(__NR_Linux +  36)
+#define __NR_alarm			(__NR_Linux +  37)
+#define __NR_getpid			(__NR_Linux +  38)
+#define __NR_sendfile			(__NR_Linux +  39)
+#define __NR_socket			(__NR_Linux +  40)
+#define __NR_connect			(__NR_Linux +  41)
+#define __NR_accept			(__NR_Linux +  42)
+#define __NR_sendto			(__NR_Linux +  43)
+#define __NR_recvfrom			(__NR_Linux +  44)
+#define __NR_sendmsg			(__NR_Linux +  45)
+#define __NR_recvmsg			(__NR_Linux +  46)
+#define __NR_shutdown			(__NR_Linux +  47)
+#define __NR_bind			(__NR_Linux +  48)
+#define __NR_listen			(__NR_Linux +  49)
+#define __NR_getsockname		(__NR_Linux +  50)
+#define __NR_getpeername		(__NR_Linux +  51)
+#define __NR_socketpair			(__NR_Linux +  52)
+#define __NR_setsockopt			(__NR_Linux +  53)
+#define __NR_getsockopt			(__NR_Linux +  54)
+#define __NR_clone			(__NR_Linux +  55)
+#define __NR_fork			(__NR_Linux +  56)
+#define __NR_execve			(__NR_Linux +  57)
+#define __NR_exit			(__NR_Linux +  58)
+#define __NR_wait4			(__NR_Linux +  59)
+#define __NR_kill			(__NR_Linux +  60)
+#define __NR_uname			(__NR_Linux +  61)
+#define __NR_semget			(__NR_Linux +  62)
+#define __NR_semop			(__NR_Linux +  63)
+#define __NR_semctl			(__NR_Linux +  64)
+#define __NR_shmdt			(__NR_Linux +  65)
+#define __NR_msgget			(__NR_Linux +  66)
+#define __NR_msgsnd			(__NR_Linux +  67)
+#define __NR_msgrcv			(__NR_Linux +  68)
+#define __NR_msgctl			(__NR_Linux +  69)
+#define __NR_fcntl			(__NR_Linux +  70)
+#define __NR_flock			(__NR_Linux +  71)
+#define __NR_fsync			(__NR_Linux +  72)
+#define __NR_fdatasync			(__NR_Linux +  73)
+#define __NR_truncate			(__NR_Linux +  74)
+#define __NR_ftruncate			(__NR_Linux +  75)
+#define __NR_getdents			(__NR_Linux +  76)
+#define __NR_getcwd			(__NR_Linux +  77)
+#define __NR_chdir			(__NR_Linux +  78)
+#define __NR_fchdir			(__NR_Linux +  79)
+#define __NR_rename			(__NR_Linux +  80)
+#define __NR_mkdir			(__NR_Linux +  81)
+#define __NR_rmdir			(__NR_Linux +  82)
+#define __NR_creat			(__NR_Linux +  83)
+#define __NR_link			(__NR_Linux +  84)
+#define __NR_unlink			(__NR_Linux +  85)
+#define __NR_symlink			(__NR_Linux +  86)
+#define __NR_readlink			(__NR_Linux +  87)
+#define __NR_chmod			(__NR_Linux +  88)
+#define __NR_fchmod			(__NR_Linux +  89)
+#define __NR_chown			(__NR_Linux +  90)
+#define __NR_fchown			(__NR_Linux +  91)
+#define __NR_lchown			(__NR_Linux +  92)
+#define __NR_umask			(__NR_Linux +  93)
+#define __NR_gettimeofday		(__NR_Linux +  94)
+#define __NR_getrlimit			(__NR_Linux +  95)
+#define __NR_getrusage			(__NR_Linux +  96)
+#define __NR_sysinfo			(__NR_Linux +  97)
+#define __NR_times			(__NR_Linux +  98)
+#define __NR_ptrace			(__NR_Linux +  99)
+#define __NR_getuid			(__NR_Linux + 100)
+#define __NR_syslog			(__NR_Linux + 101)
+#define __NR_getgid			(__NR_Linux + 102)
+#define __NR_setuid			(__NR_Linux + 103)
+#define __NR_setgid			(__NR_Linux + 104)
+#define __NR_geteuid			(__NR_Linux + 105)
+#define __NR_getegid			(__NR_Linux + 106)
+#define __NR_setpgid			(__NR_Linux + 107)
+#define __NR_getppid			(__NR_Linux + 108)
+#define __NR_getpgrp			(__NR_Linux + 109)
+#define __NR_setsid			(__NR_Linux + 110)
+#define __NR_setreuid			(__NR_Linux + 111)
+#define __NR_setregid			(__NR_Linux + 112)
+#define __NR_getgroups			(__NR_Linux + 113)
+#define __NR_setgroups			(__NR_Linux + 114)
+#define __NR_setresuid			(__NR_Linux + 115)
+#define __NR_getresuid			(__NR_Linux + 116)
+#define __NR_setresgid			(__NR_Linux + 117)
+#define __NR_getresgid			(__NR_Linux + 118)
+#define __NR_getpgid			(__NR_Linux + 119)
+#define __NR_setfsuid			(__NR_Linux + 120)
+#define __NR_setfsgid			(__NR_Linux + 121)
+#define __NR_getsid			(__NR_Linux + 122)
+#define __NR_capget			(__NR_Linux + 123)
+#define __NR_capset			(__NR_Linux + 124)
+#define __NR_rt_sigpending		(__NR_Linux + 125)
+#define __NR_rt_sigtimedwait		(__NR_Linux + 126)
+#define __NR_rt_sigqueueinfo		(__NR_Linux + 127)
+#define __NR_rt_sigsuspend		(__NR_Linux + 128)
+#define __NR_sigaltstack		(__NR_Linux + 129)
+#define __NR_utime			(__NR_Linux + 130)
+#define __NR_mknod			(__NR_Linux + 131)
+#define __NR_personality		(__NR_Linux + 132)
+#define __NR_ustat			(__NR_Linux + 133)
+#define __NR_statfs			(__NR_Linux + 134)
+#define __NR_fstatfs			(__NR_Linux + 135)
+#define __NR_sysfs			(__NR_Linux + 136)
+#define __NR_getpriority		(__NR_Linux + 137)
+#define __NR_setpriority		(__NR_Linux + 138)
+#define __NR_sched_setparam		(__NR_Linux + 139)
+#define __NR_sched_getparam		(__NR_Linux + 140)
+#define __NR_sched_setscheduler		(__NR_Linux + 141)
+#define __NR_sched_getscheduler		(__NR_Linux + 142)
+#define __NR_sched_get_priority_max	(__NR_Linux + 143)
+#define __NR_sched_get_priority_min	(__NR_Linux + 144)
+#define __NR_sched_rr_get_interval	(__NR_Linux + 145)
+#define __NR_mlock			(__NR_Linux + 146)
+#define __NR_munlock			(__NR_Linux + 147)
+#define __NR_mlockall			(__NR_Linux + 148)
+#define __NR_munlockall			(__NR_Linux + 149)
+#define __NR_vhangup			(__NR_Linux + 150)
+#define __NR_pivot_root			(__NR_Linux + 151)
+#define __NR__sysctl			(__NR_Linux + 152)
+#define __NR_prctl			(__NR_Linux + 153)
+#define __NR_adjtimex			(__NR_Linux + 154)
+#define __NR_setrlimit			(__NR_Linux + 155)
+#define __NR_chroot			(__NR_Linux + 156)
+#define __NR_sync			(__NR_Linux + 157)
+#define __NR_acct			(__NR_Linux + 158)
+#define __NR_settimeofday		(__NR_Linux + 159)
+#define __NR_mount			(__NR_Linux + 160)
+#define __NR_umount2			(__NR_Linux + 161)
+#define __NR_swapon			(__NR_Linux + 162)
+#define __NR_swapoff			(__NR_Linux + 163)
+#define __NR_reboot			(__NR_Linux + 164)
+#define __NR_sethostname		(__NR_Linux + 165)
+#define __NR_setdomainname		(__NR_Linux + 166)
+#define __NR_create_module		(__NR_Linux + 167)
+#define __NR_init_module		(__NR_Linux + 168)
+#define __NR_delete_module		(__NR_Linux + 169)
+#define __NR_get_kernel_syms		(__NR_Linux + 170)
+#define __NR_query_module		(__NR_Linux + 171)
+#define __NR_quotactl			(__NR_Linux + 172)
+#define __NR_nfsservctl			(__NR_Linux + 173)
+#define __NR_getpmsg			(__NR_Linux + 174)
+#define __NR_putpmsg			(__NR_Linux + 175)
+#define __NR_afs_syscall		(__NR_Linux + 176)
+#define __NR_reserved177		(__NR_Linux + 177)
+#define __NR_gettid			(__NR_Linux + 178)
+#define __NR_readahead			(__NR_Linux + 179)
+#define __NR_setxattr			(__NR_Linux + 180)
+#define __NR_lsetxattr			(__NR_Linux + 181)
+#define __NR_fsetxattr			(__NR_Linux + 182)
+#define __NR_getxattr			(__NR_Linux + 183)
+#define __NR_lgetxattr			(__NR_Linux + 184)
+#define __NR_fgetxattr			(__NR_Linux + 185)
+#define __NR_listxattr			(__NR_Linux + 186)
+#define __NR_llistxattr			(__NR_Linux + 187)
+#define __NR_flistxattr			(__NR_Linux + 188)
+#define __NR_removexattr		(__NR_Linux + 189)
+#define __NR_lremovexattr		(__NR_Linux + 190)
+#define __NR_fremovexattr		(__NR_Linux + 191)
+#define __NR_tkill			(__NR_Linux + 192)
+#define __NR_reserved193		(__NR_Linux + 193)
+#define __NR_futex			(__NR_Linux + 194)
+#define __NR_sched_setaffinity		(__NR_Linux + 195)
+#define __NR_sched_getaffinity		(__NR_Linux + 196)
+#define __NR_cacheflush			(__NR_Linux + 197)
+#define __NR_cachectl			(__NR_Linux + 198)
+#define __NR_sysmips			(__NR_Linux + 199)
+#define __NR_io_setup			(__NR_Linux + 200)
+#define __NR_io_destroy			(__NR_Linux + 201)
+#define __NR_io_getevents		(__NR_Linux + 202)
+#define __NR_io_submit			(__NR_Linux + 203)
+#define __NR_io_cancel			(__NR_Linux + 204)
+#define __NR_exit_group			(__NR_Linux + 205)
+#define __NR_lookup_dcookie		(__NR_Linux + 206)
+#define __NR_epoll_create		(__NR_Linux + 207)
+#define __NR_epoll_ctl			(__NR_Linux + 208)
+#define __NR_epoll_wait			(__NR_Linux + 209)
+#define __NR_remap_file_pages		(__NR_Linux + 210)
+#define __NR_rt_sigreturn		(__NR_Linux + 211)
+#define __NR_fcntl64			(__NR_Linux + 212)
+#define __NR_set_tid_address		(__NR_Linux + 213)
+#define __NR_restart_syscall		(__NR_Linux + 214)
+#define __NR_semtimedop			(__NR_Linux + 215)
+#define __NR_fadvise64			(__NR_Linux + 216)
+#define __NR_statfs64			(__NR_Linux + 217)
+#define __NR_fstatfs64			(__NR_Linux + 218)
+#define __NR_sendfile64			(__NR_Linux + 219)
+#define __NR_timer_create		(__NR_Linux + 220)
+#define __NR_timer_settime		(__NR_Linux + 221)
+#define __NR_timer_gettime		(__NR_Linux + 222)
+#define __NR_timer_getoverrun		(__NR_Linux + 223)
+#define __NR_timer_delete		(__NR_Linux + 224)
+#define __NR_clock_settime		(__NR_Linux + 225)
+#define __NR_clock_gettime		(__NR_Linux + 226)
+#define __NR_clock_getres		(__NR_Linux + 227)
+#define __NR_clock_nanosleep		(__NR_Linux + 228)
+#define __NR_tgkill			(__NR_Linux + 229)
+#define __NR_utimes			(__NR_Linux + 230)
+#define __NR_mbind			(__NR_Linux + 231)
+#define __NR_get_mempolicy		(__NR_Linux + 232)
+#define __NR_set_mempolicy		(__NR_Linux + 233)
+#define __NR_mq_open			(__NR_Linux + 234)
+#define __NR_mq_unlink			(__NR_Linux + 235)
+#define __NR_mq_timedsend		(__NR_Linux + 236)
+#define __NR_mq_timedreceive		(__NR_Linux + 237)
+#define __NR_mq_notify			(__NR_Linux + 238)
+#define __NR_mq_getsetattr		(__NR_Linux + 239)
+#define __NR_vserver			(__NR_Linux + 240)
+#define __NR_waitid			(__NR_Linux + 241)
+/* #define __NR_sys_setaltroot		(__NR_Linux + 242) */
+#define __NR_add_key			(__NR_Linux + 243)
+#define __NR_request_key		(__NR_Linux + 244)
+#define __NR_keyctl			(__NR_Linux + 245)
+#define __NR_set_thread_area		(__NR_Linux + 246)
+#define __NR_inotify_init		(__NR_Linux + 247)
+#define __NR_inotify_add_watch		(__NR_Linux + 248)
+#define __NR_inotify_rm_watch		(__NR_Linux + 249)
+#define __NR_migrate_pages		(__NR_Linux + 250)
+#define __NR_openat			(__NR_Linux + 251)
+#define __NR_mkdirat			(__NR_Linux + 252)
+#define __NR_mknodat			(__NR_Linux + 253)
+#define __NR_fchownat			(__NR_Linux + 254)
+#define __NR_futimesat			(__NR_Linux + 255)
+#define __NR_newfstatat			(__NR_Linux + 256)
+#define __NR_unlinkat			(__NR_Linux + 257)
+#define __NR_renameat			(__NR_Linux + 258)
+#define __NR_linkat			(__NR_Linux + 259)
+#define __NR_symlinkat			(__NR_Linux + 260)
+#define __NR_readlinkat			(__NR_Linux + 261)
+#define __NR_fchmodat			(__NR_Linux + 262)
+#define __NR_faccessat			(__NR_Linux + 263)
+#define __NR_pselect6			(__NR_Linux + 264)
+#define __NR_ppoll			(__NR_Linux + 265)
+#define __NR_unshare			(__NR_Linux + 266)
+#define __NR_splice			(__NR_Linux + 267)
+#define __NR_sync_file_range		(__NR_Linux + 268)
+#define __NR_tee			(__NR_Linux + 269)
+#define __NR_vmsplice			(__NR_Linux + 270)
+#define __NR_move_pages			(__NR_Linux + 271)
+#define __NR_set_robust_list		(__NR_Linux + 272)
+#define __NR_get_robust_list		(__NR_Linux + 273)
+#define __NR_kexec_load			(__NR_Linux + 274)
+#define __NR_getcpu			(__NR_Linux + 275)
+#define __NR_epoll_pwait		(__NR_Linux + 276)
+#define __NR_ioprio_set			(__NR_Linux + 277)
+#define __NR_ioprio_get			(__NR_Linux + 278)
+#define __NR_utimensat			(__NR_Linux + 279)
+#define __NR_signalfd			(__NR_Linux + 280)
+#define __NR_timerfd			(__NR_Linux + 281)
+#define __NR_eventfd			(__NR_Linux + 282)
+#define __NR_fallocate			(__NR_Linux + 283)
+#define __NR_timerfd_create		(__NR_Linux + 284)
+#define __NR_timerfd_gettime		(__NR_Linux + 285)
+#define __NR_timerfd_settime		(__NR_Linux + 286)
+#define __NR_signalfd4			(__NR_Linux + 287)
+#define __NR_eventfd2			(__NR_Linux + 288)
+#define __NR_epoll_create1		(__NR_Linux + 289)
+#define __NR_dup3			(__NR_Linux + 290)
+#define __NR_pipe2			(__NR_Linux + 291)
+#define __NR_inotify_init1		(__NR_Linux + 292)
+
+/*
+ * Offset of the last N32 flavoured syscall
+ */
+#define __NR_Linux_syscalls		292
+
+#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#define __NR_N32_Linux			6000
+#define __NR_N32_Linux_syscalls		292
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#define __ARCH_OMIT_COMPAT_SYS_GETDENTS64
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+# ifdef CONFIG_32BIT
+#  define __ARCH_WANT_STAT64
+#  define __ARCH_WANT_SYS_TIME
+# endif
+# ifdef CONFIG_MIPS32_O32
+#  define __ARCH_WANT_COMPAT_SYS_TIME
+# endif
+
+/* whitelists for checksyscalls */
+#define __IGNORE_select
+#define __IGNORE_vfork
+#define __IGNORE_time
+#define __IGNORE_uselib
+#define __IGNORE_fadvise64_64
+#define __IGNORE_getdents64
+#if _MIPS_SIM == _MIPS_SIM_NABI32
+#define __IGNORE_truncate64
+#define __IGNORE_ftruncate64
+#define __IGNORE_stat64
+#define __IGNORE_lstat64
+#define __IGNORE_fstat64
+#define __IGNORE_fstatat64
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n" #x "\t=\tsys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H */
diff --git a/arch/mips/include/asm/user.h b/arch/mips/include/asm/user.h
new file mode 100644
index 0000000..afa83a4
--- /dev/null
+++ b/arch/mips/include/asm/user.h
@@ -0,0 +1,58 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <asm/reg.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the irix-core).  The file
+ * contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	unsigned long	regs[EF_SIZE /		/* integer and fp regs */
+			sizeof(unsigned long) + 64];
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_USER_H */
diff --git a/arch/mips/include/asm/vga.h b/arch/mips/include/asm/vga.h
new file mode 100644
index 0000000..f4cff7e
--- /dev/null
+++ b/arch/mips/include/asm/vga.h
@@ -0,0 +1,47 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+#include <asm/byteorder.h>
+
+/*
+ *	On the PC, we can just recalculate addresses and then
+ *	access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x, s)	(0xb0000000L + (unsigned long)(x))
+
+#define vga_readb(x)	(*(x))
+#define vga_writeb(x, y)	(*(y) = (x))
+
+#define VT_BUF_HAVE_RW
+/*
+ *  These are only needed for supporting VGA or MDA text mode, which use little
+ *  endian byte ordering.
+ *  In other cases, we can optimize by using native byte ordering and
+ *  <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+#undef scr_writew
+#undef scr_readw
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+	*addr = cpu_to_le16(val);
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+	return le16_to_cpu(*addr);
+}
+
+#define scr_memcpyw(d, s, c) memcpy(d, s, c)
+#define scr_memmovew(d, s, c) memmove(d, s, c)
+#define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
+
+#endif /* _ASM_VGA_H */
diff --git a/arch/mips/include/asm/vpe.h b/arch/mips/include/asm/vpe.h
new file mode 100644
index 0000000..c6e1b96
--- /dev/null
+++ b/arch/mips/include/asm/vpe.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_VPE_H
+#define _ASM_VPE_H
+
+struct vpe_notifications {
+	void (*start)(int vpe);
+	void (*stop)(int vpe);
+
+	struct list_head list;
+};
+
+
+extern int vpe_notify(int index, struct vpe_notifications *notify);
+
+extern void *vpe_get_shared(int index);
+extern int vpe_getuid(int index);
+extern int vpe_getgid(int index);
+extern char *vpe_getcwd(int index);
+
+#endif /* _ASM_VPE_H */
diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h
new file mode 100644
index 0000000..e0ee05a
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/capcella.h
@@ -0,0 +1,43 @@
+/*
+ *  capcella.h, Include file for ZAO Networks Capcella.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ZAO_CAPCELLA_H
+#define __ZAO_CAPCELLA_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define PC104PLUS_INTA_PIN		2
+#define PC104PLUS_INTB_PIN		3
+#define PC104PLUS_INTC_PIN		4
+#define PC104PLUS_INTD_PIN		5
+
+/*
+ * Interrupt Number
+ */
+#define RTL8139_1_IRQ			GIU_IRQ(PC104PLUS_INTC_PIN)
+#define RTL8139_2_IRQ			GIU_IRQ(PC104PLUS_INTD_PIN)
+#define PC104PLUS_INTA_IRQ		GIU_IRQ(PC104PLUS_INTA_PIN)
+#define PC104PLUS_INTB_IRQ		GIU_IRQ(PC104PLUS_INTB_PIN)
+#define PC104PLUS_INTC_IRQ		GIU_IRQ(PC104PLUS_INTC_PIN)
+#define PC104PLUS_INTD_IRQ		GIU_IRQ(PC104PLUS_INTD_PIN)
+
+#endif /* __ZAO_CAPCELLA_H */
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
new file mode 100644
index 0000000..0bcdd3a
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -0,0 +1,78 @@
+/*
+ *  Include file for NEC VR4100 series General-purpose I/O Unit.
+ *
+ *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __NEC_VR41XX_GIU_H
+#define __NEC_VR41XX_GIU_H
+
+/*
+ * NEC VR4100 series GIU platform device IDs.
+ */
+enum {
+	GPIO_50PINS_PULLUPDOWN,
+	GPIO_36PINS,
+	GPIO_48PINS_EDGE_SELECT,
+};
+
+typedef enum {
+	IRQ_TRIGGER_LEVEL,
+	IRQ_TRIGGER_EDGE,
+	IRQ_TRIGGER_EDGE_FALLING,
+	IRQ_TRIGGER_EDGE_RISING,
+} irq_trigger_t;
+
+typedef enum {
+	IRQ_SIGNAL_THROUGH,
+	IRQ_SIGNAL_HOLD,
+} irq_signal_t;
+
+extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal);
+
+typedef enum {
+	IRQ_LEVEL_LOW,
+	IRQ_LEVEL_HIGH,
+} irq_level_t;
+
+extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level);
+
+typedef enum {
+	GPIO_DATA_LOW,
+	GPIO_DATA_HIGH,
+	GPIO_DATA_INVAL,
+} gpio_data_t;
+
+extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin);
+extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data);
+
+typedef enum {
+	GPIO_INPUT,
+	GPIO_OUTPUT,
+	GPIO_OUTPUT_DISABLE,
+} gpio_direction_t;
+
+extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir);
+
+typedef enum {
+	GPIO_PULL_DOWN,
+	GPIO_PULL_UP,
+	GPIO_PULL_DISABLE,
+} gpio_pull_t;
+
+extern int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull);
+
+#endif /* __NEC_VR41XX_GIU_H */
diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h
new file mode 100644
index 0000000..d315dfb
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/irq.h
@@ -0,0 +1,101 @@
+/*
+ * include/asm-mips/vr41xx/irq.h
+ *
+ * Interrupt numbers for NEC VR4100 series.
+ *
+ * Copyright (C) 1999 Michael Klar
+ * Copyright (C) 2001, 2002 Paul Mundt
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2002 TimeSys Corp.
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __NEC_VR41XX_IRQ_H
+#define __NEC_VR41XX_IRQ_H
+
+/*
+ * CPU core Interrupt Numbers
+ */
+#define MIPS_CPU_IRQ_BASE	0
+#define MIPS_CPU_IRQ(x)		(MIPS_CPU_IRQ_BASE + (x))
+#define MIPS_SOFTINT0_IRQ	MIPS_CPU_IRQ(0)
+#define MIPS_SOFTINT1_IRQ	MIPS_CPU_IRQ(1)
+#define INT0_IRQ		MIPS_CPU_IRQ(2)
+#define INT1_IRQ		MIPS_CPU_IRQ(3)
+#define INT2_IRQ		MIPS_CPU_IRQ(4)
+#define INT3_IRQ		MIPS_CPU_IRQ(5)
+#define INT4_IRQ		MIPS_CPU_IRQ(6)
+#define TIMER_IRQ		MIPS_CPU_IRQ(7)
+
+/*
+ * SYINT1 Interrupt Numbers
+ */
+#define SYSINT1_IRQ_BASE	8
+#define SYSINT1_IRQ(x)		(SYSINT1_IRQ_BASE + (x))
+#define BATTRY_IRQ		SYSINT1_IRQ(0)
+#define POWER_IRQ		SYSINT1_IRQ(1)
+#define RTCLONG1_IRQ		SYSINT1_IRQ(2)
+#define ELAPSEDTIME_IRQ		SYSINT1_IRQ(3)
+/* RFU */
+#define PIU_IRQ			SYSINT1_IRQ(5)
+#define AIU_IRQ			SYSINT1_IRQ(6)
+#define KIU_IRQ			SYSINT1_IRQ(7)
+#define GIUINT_IRQ		SYSINT1_IRQ(8)
+#define SIU_IRQ			SYSINT1_IRQ(9)
+#define BUSERR_IRQ		SYSINT1_IRQ(10)
+#define SOFTINT_IRQ		SYSINT1_IRQ(11)
+#define CLKRUN_IRQ		SYSINT1_IRQ(12)
+#define DOZEPIU_IRQ		SYSINT1_IRQ(13)
+#define SYSINT1_IRQ_LAST	DOZEPIU_IRQ
+
+/*
+ * SYSINT2 Interrupt Numbers
+ */
+#define SYSINT2_IRQ_BASE	24
+#define SYSINT2_IRQ(x)		(SYSINT2_IRQ_BASE + (x))
+#define RTCLONG2_IRQ		SYSINT2_IRQ(0)
+#define LED_IRQ			SYSINT2_IRQ(1)
+#define HSP_IRQ			SYSINT2_IRQ(2)
+#define TCLOCK_IRQ		SYSINT2_IRQ(3)
+#define FIR_IRQ			SYSINT2_IRQ(4)
+#define CEU_IRQ			SYSINT2_IRQ(4)	/* same number as FIR_IRQ */
+#define DSIU_IRQ		SYSINT2_IRQ(5)
+#define PCI_IRQ			SYSINT2_IRQ(6)
+#define SCU_IRQ			SYSINT2_IRQ(7)
+#define CSI_IRQ			SYSINT2_IRQ(8)
+#define BCU_IRQ			SYSINT2_IRQ(9)
+#define ETHERNET_IRQ		SYSINT2_IRQ(10)
+#define SYSINT2_IRQ_LAST	ETHERNET_IRQ
+
+/*
+ * GIU Interrupt Numbers
+ */
+#define GIU_IRQ_BASE		40
+#define GIU_IRQ(x)		(GIU_IRQ_BASE + (x))	/* IRQ 40-71 */
+#define GIU_IRQ_LAST		GIU_IRQ(31)
+
+/*
+ * VRC4173 Interrupt Numbers
+ */
+#define VRC4173_IRQ_BASE	72
+#define VRC4173_IRQ(x)		(VRC4173_IRQ_BASE + (x))
+#define VRC4173_USB_IRQ		VRC4173_IRQ(0)
+#define VRC4173_PCMCIA2_IRQ	VRC4173_IRQ(1)
+#define VRC4173_PCMCIA1_IRQ	VRC4173_IRQ(2)
+#define VRC4173_PS2CH2_IRQ	VRC4173_IRQ(3)
+#define VRC4173_PS2CH1_IRQ	VRC4173_IRQ(4)
+#define VRC4173_PIU_IRQ		VRC4173_IRQ(5)
+#define VRC4173_AIU_IRQ		VRC4173_IRQ(6)
+#define VRC4173_KIU_IRQ		VRC4173_IRQ(7)
+#define VRC4173_GIU_IRQ		VRC4173_IRQ(8)
+#define VRC4173_AC97_IRQ	VRC4173_IRQ(9)
+#define VRC4173_AC97INT1_IRQ	VRC4173_IRQ(10)
+/* RFU */
+#define VRC4173_DOZEPIU_IRQ	VRC4173_IRQ(13)
+#define VRC4173_IRQ_LAST	VRC4173_DOZEPIU_IRQ
+
+#endif /* __NEC_VR41XX_IRQ_H */
diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h
new file mode 100644
index 0000000..1d67df8
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/mpc30x.h
@@ -0,0 +1,37 @@
+/*
+ *  mpc30x.h, Include file for Victor MP-C303/304.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __VICTOR_MPC30X_H
+#define __VICTOR_MPC30X_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define VRC4173_PIN			1
+#define MQ200_PIN			4
+
+/*
+ * Interrupt Number
+ */
+#define VRC4173_CASCADE_IRQ		GIU_IRQ(VRC4173_PIN)
+#define MQ200_IRQ			GIU_IRQ(MQ200_PIN)
+
+#endif /* __VICTOR_MPC30X_H */
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
new file mode 100644
index 0000000..6fc01ce
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -0,0 +1,90 @@
+/*
+ *  Include file for NEC VR4100 series PCI Control Unit.
+ *
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __NEC_VR41XX_PCI_H
+#define __NEC_VR41XX_PCI_H
+
+#define PCI_MASTER_ADDRESS_MASK	0x7fffffffU
+
+struct pci_master_address_conversion {
+	uint32_t bus_base_address;
+	uint32_t address_mask;
+	uint32_t pci_base_address;
+};
+
+struct pci_target_address_conversion {
+	uint32_t address_mask;
+	uint32_t bus_base_address;
+};
+
+typedef enum {
+	CANNOT_LOCK_FROM_DEVICE,
+	CAN_LOCK_FROM_DEVICE,
+} pci_exclusive_access_t;
+
+struct pci_mailbox_address {
+	uint32_t base_address;
+};
+
+struct pci_target_address_window {
+	uint32_t base_address;
+};
+
+typedef enum {
+	PCI_ARBITRATION_MODE_FAIR,
+	PCI_ARBITRATION_MODE_ALTERNATE_0,
+	PCI_ARBITRATION_MODE_ALTERNATE_B,
+} pci_arbiter_priority_control_t;
+
+typedef enum {
+	PCI_TAKE_AWAY_GNT_DISABLE,
+	PCI_TAKE_AWAY_GNT_ENABLE,
+} pci_take_away_gnt_mode_t;
+
+struct pci_controller_unit_setup {
+	struct pci_master_address_conversion *master_memory1;
+	struct pci_master_address_conversion *master_memory2;
+
+	struct pci_target_address_conversion *target_memory1;
+	struct pci_target_address_conversion *target_memory2;
+
+	struct pci_master_address_conversion *master_io;
+
+	pci_exclusive_access_t exclusive_access;
+
+	uint32_t pci_clock_max;
+	uint8_t wait_time_limit_from_irdy_to_trdy;	/* Only VR4122 is supported */
+
+	struct pci_mailbox_address *mailbox;
+	struct pci_target_address_window *target_window1;
+	struct pci_target_address_window *target_window2;
+
+	uint8_t master_latency_timer;
+	uint8_t retry_limit;
+
+	pci_arbiter_priority_control_t arbiter_priority_control;
+	pci_take_away_gnt_mode_t take_away_gnt_mode;
+
+	struct resource *mem_resource;
+	struct resource *io_resource;
+};
+
+extern void vr41xx_pciu_setup(struct pci_controller_unit_setup *setup);
+
+#endif /* __NEC_VR41XX_PCI_H */
diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h
new file mode 100644
index 0000000..da9f6e3
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/siu.h
@@ -0,0 +1,58 @@
+/*
+ *  Include file for NEC VR4100 series Serial Interface Unit.
+ *
+ *  Copyright (C) 2005-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __NEC_VR41XX_SIU_H
+#define __NEC_VR41XX_SIU_H
+
+#define SIU_PORTS_MAX 2
+
+typedef enum {
+	SIU_INTERFACE_RS232C,
+	SIU_INTERFACE_IRDA,
+} siu_interface_t;
+
+extern void vr41xx_select_siu_interface(siu_interface_t interface);
+
+typedef enum {
+	SIU_USE_IRDA,
+	FIR_USE_IRDA,
+} irda_use_t;
+
+extern void vr41xx_use_irda(irda_use_t use);
+
+typedef enum {
+	SHARP_IRDA,
+	TEMIC_IRDA,
+	HP_IRDA,
+} irda_module_t;
+
+typedef enum {
+	IRDA_TX_1_5MBPS,
+	IRDA_TX_4MBPS,
+} irda_speed_t;
+
+extern void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed);
+
+#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
+extern void vr41xx_siu_early_setup(struct uart_port *port);
+#else
+static inline void vr41xx_siu_early_setup(struct uart_port *port) {}
+#endif
+
+#endif /* __NEC_VR41XX_SIU_H */
diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h
new file mode 100644
index 0000000..dc981b4
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/tb0219.h
@@ -0,0 +1,42 @@
+/*
+ *  tb0219.h, Include file for TANBAC TB0219.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  Modified for TANBAC TB0219:
+ *  Copyright (C) 2003 Megasolution Inc.  <matsu@megasolution.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TANBAC_TB0219_H
+#define __TANBAC_TB0219_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define TB0219_PCI_SLOT1_PIN		2
+#define TB0219_PCI_SLOT2_PIN		3
+#define TB0219_PCI_SLOT3_PIN		4
+
+/*
+ * Interrupt Number
+ */
+#define TB0219_PCI_SLOT1_IRQ		GIU_IRQ(TB0219_PCI_SLOT1_PIN)
+#define TB0219_PCI_SLOT2_IRQ		GIU_IRQ(TB0219_PCI_SLOT2_PIN)
+#define TB0219_PCI_SLOT3_IRQ		GIU_IRQ(TB0219_PCI_SLOT3_PIN)
+
+#endif /* __TANBAC_TB0219_H */
diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h
new file mode 100644
index 0000000..de527dc
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/tb0226.h
@@ -0,0 +1,43 @@
+/*
+ *  tb0226.h, Include file for TANBAC TB0226.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TANBAC_TB0226_H
+#define __TANBAC_TB0226_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define GD82559_1_PIN			2
+#define GD82559_2_PIN			3
+#define UPD720100_INTA_PIN		4
+#define UPD720100_INTB_PIN		8
+#define UPD720100_INTC_PIN		13
+
+/*
+ * Interrupt Number
+ */
+#define GD82559_1_IRQ			GIU_IRQ(GD82559_1_PIN)
+#define GD82559_2_IRQ			GIU_IRQ(GD82559_2_PIN)
+#define UPD720100_INTA_IRQ		GIU_IRQ(UPD720100_INTA_PIN)
+#define UPD720100_INTB_IRQ		GIU_IRQ(UPD720100_INTB_PIN)
+#define UPD720100_INTC_IRQ		GIU_IRQ(UPD720100_INTC_PIN)
+
+#endif /* __TANBAC_TB0226_H */
diff --git a/arch/mips/include/asm/vr41xx/tb0287.h b/arch/mips/include/asm/vr41xx/tb0287.h
new file mode 100644
index 0000000..61bead6
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/tb0287.h
@@ -0,0 +1,43 @@
+/*
+ *  tb0287.h, Include file for TANBAC TB0287 mini-ITX board.
+ *
+ *  Copyright (C) 2005  Media Lab Inc. <ito@mlb.co.jp>
+ *
+ *  This code is largely based on tb0219.h.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TANBAC_TB0287_H
+#define __TANBAC_TB0287_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define TB0287_PCI_SLOT_PIN		2
+#define TB0287_SM501_PIN		3
+#define TB0287_SIL680A_PIN		8
+#define TB0287_RTL8110_PIN		13
+
+/*
+ * Interrupt Number
+ */
+#define TB0287_PCI_SLOT_IRQ		GIU_IRQ(TB0287_PCI_SLOT_PIN)
+#define TB0287_SM501_IRQ		GIU_IRQ(TB0287_SM501_PIN)
+#define TB0287_SIL680A_IRQ		GIU_IRQ(TB0287_SIL680A_PIN)
+#define TB0287_RTL8110_IRQ		GIU_IRQ(TB0287_RTL8110_PIN)
+
+#endif /* __TANBAC_TB0287_H */
diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h
new file mode 100644
index 0000000..22be649
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/vr41xx.h
@@ -0,0 +1,152 @@
+/*
+ * include/asm-mips/vr41xx/vr41xx.h
+ *
+ * Include file for NEC VR4100 series.
+ *
+ * Copyright (C) 1999 Michael Klar
+ * Copyright (C) 2001, 2002 Paul Mundt
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2002 TimeSys Corp.
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __NEC_VR41XX_H
+#define __NEC_VR41XX_H
+
+#include <linux/interrupt.h>
+
+/*
+ * CPU Revision
+ */
+/* VR4122 0x00000c70-0x00000c72 */
+#define PRID_VR4122_REV1_0	0x00000c70
+#define PRID_VR4122_REV2_0	0x00000c70
+#define PRID_VR4122_REV2_1	0x00000c70
+#define PRID_VR4122_REV3_0	0x00000c71
+#define PRID_VR4122_REV3_1	0x00000c72
+
+/* VR4181A 0x00000c73-0x00000c7f */
+#define PRID_VR4181A_REV1_0	0x00000c73
+#define PRID_VR4181A_REV1_1	0x00000c74
+
+/* VR4131 0x00000c80-0x00000c83 */
+#define PRID_VR4131_REV1_2	0x00000c80
+#define PRID_VR4131_REV2_0	0x00000c81
+#define PRID_VR4131_REV2_1	0x00000c82
+#define PRID_VR4131_REV2_2	0x00000c83
+
+/* VR4133 0x00000c84- */
+#define PRID_VR4133		0x00000c84
+
+/*
+ * Bus Control Uint
+ */
+extern unsigned long vr41xx_calculate_clock_frequency(void);
+extern unsigned long vr41xx_get_vtclock_frequency(void);
+extern unsigned long vr41xx_get_tclock_frequency(void);
+
+/*
+ * Clock Mask Unit
+ */
+typedef enum {
+	PIU_CLOCK,
+	SIU_CLOCK,
+	AIU_CLOCK,
+	KIU_CLOCK,
+	FIR_CLOCK,
+	DSIU_CLOCK,
+	CSI_CLOCK,
+	PCIU_CLOCK,
+	HSP_CLOCK,
+	PCI_CLOCK,
+	CEU_CLOCK,
+	ETHER0_CLOCK,
+	ETHER1_CLOCK
+} vr41xx_clock_t;
+
+extern void vr41xx_supply_clock(vr41xx_clock_t clock);
+extern void vr41xx_mask_clock(vr41xx_clock_t clock);
+
+/*
+ * Interrupt Control Unit
+ */
+extern int vr41xx_set_intassign(unsigned int irq, unsigned char intassign);
+extern int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int));
+
+#define PIUINT_COMMAND		0x0040
+#define PIUINT_DATA		0x0020
+#define PIUINT_PAGE1		0x0010
+#define PIUINT_PAGE0		0x0008
+#define PIUINT_DATALOST		0x0004
+#define PIUINT_STATUSCHANGE	0x0001
+
+extern void vr41xx_enable_piuint(uint16_t mask);
+extern void vr41xx_disable_piuint(uint16_t mask);
+
+#define AIUINT_INPUT_DMAEND	0x0800
+#define AIUINT_INPUT_DMAHALT	0x0400
+#define AIUINT_INPUT_DATALOST	0x0200
+#define AIUINT_INPUT_DATA	0x0100
+#define AIUINT_OUTPUT_DMAEND	0x0008
+#define AIUINT_OUTPUT_DMAHALT	0x0004
+#define AIUINT_OUTPUT_NODATA	0x0002
+
+extern void vr41xx_enable_aiuint(uint16_t mask);
+extern void vr41xx_disable_aiuint(uint16_t mask);
+
+#define KIUINT_DATALOST		0x0004
+#define KIUINT_DATAREADY	0x0002
+#define KIUINT_SCAN		0x0001
+
+extern void vr41xx_enable_kiuint(uint16_t mask);
+extern void vr41xx_disable_kiuint(uint16_t mask);
+
+#define DSIUINT_CTS		0x0800
+#define DSIUINT_RXERR		0x0400
+#define DSIUINT_RX		0x0200
+#define DSIUINT_TX		0x0100
+#define DSIUINT_ALL		0x0f00
+
+extern void vr41xx_enable_dsiuint(uint16_t mask);
+extern void vr41xx_disable_dsiuint(uint16_t mask);
+
+#define FIRINT_UNIT		0x0010
+#define FIRINT_RX_DMAEND	0x0008
+#define FIRINT_RX_DMAHALT	0x0004
+#define FIRINT_TX_DMAEND	0x0002
+#define FIRINT_TX_DMAHALT	0x0001
+
+extern void vr41xx_enable_firint(uint16_t mask);
+extern void vr41xx_disable_firint(uint16_t mask);
+
+extern void vr41xx_enable_pciint(void);
+extern void vr41xx_disable_pciint(void);
+
+extern void vr41xx_enable_scuint(void);
+extern void vr41xx_disable_scuint(void);
+
+#define CSIINT_TX_DMAEND	0x0040
+#define CSIINT_TX_DMAHALT	0x0020
+#define CSIINT_TX_DATA		0x0010
+#define CSIINT_TX_FIFOEMPTY	0x0008
+#define CSIINT_RX_DMAEND	0x0004
+#define CSIINT_RX_DMAHALT	0x0002
+#define CSIINT_RX_FIFOEMPTY	0x0001
+
+extern void vr41xx_enable_csiint(uint16_t mask);
+extern void vr41xx_disable_csiint(uint16_t mask);
+
+extern void vr41xx_enable_bcuint(void);
+extern void vr41xx_disable_bcuint(void);
+
+#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
+extern void vr41xx_siu_setup(void);
+#else
+static inline void vr41xx_siu_setup(void) {}
+#endif
+
+#endif /* __NEC_VR41XX_H */
diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h
new file mode 100644
index 0000000..22361d5
--- /dev/null
+++ b/arch/mips/include/asm/war.h
@@ -0,0 +1,244 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#ifndef _ASM_WAR_H
+#define _ASM_WAR_H
+
+#include <war.h>
+
+/*
+ * Work around certain R4000 CPU errata (as implemented by GCC):
+ *
+ * - A double-word or a variable shift may give an incorrect result
+ *   if executed immediately after starting an integer division:
+ *   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ *   erratum #28
+ *   "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
+ *   #19
+ *
+ * - A double-word or a variable shift may give an incorrect result
+ *   if executed while an integer multiplication is in progress:
+ *   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ *   errata #16 & #28
+ *
+ * - An integer division may give an incorrect result if started in
+ *   a delay slot of a taken branch or a jump:
+ *   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ *   erratum #52
+ */
+#ifdef CONFIG_CPU_R4000_WORKAROUNDS
+#define R4000_WAR 1
+#else
+#define R4000_WAR 0
+#endif
+
+/*
+ * Work around certain R4400 CPU errata (as implemented by GCC):
+ *
+ * - A double-word or a variable shift may give an incorrect result
+ *   if executed immediately after starting an integer division:
+ *   "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10
+ *   "MIPS R4400MC Errata, Processor Revision 2.0 & 3.0", erratum #4
+ */
+#ifdef CONFIG_CPU_R4400_WORKAROUNDS
+#define R4400_WAR 1
+#else
+#define R4400_WAR 0
+#endif
+
+/*
+ * Work around the "daddi" and "daddiu" CPU errata:
+ *
+ * - The `daddi' instruction fails to trap on overflow.
+ *   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ *   erratum #23
+ *
+ * - The `daddiu' instruction can produce an incorrect result.
+ *   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ *   erratum #41
+ *   "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
+ *   #15
+ *   "MIPS R4400PC/SC Errata, Processor Revision 1.0", erratum #7
+ *   "MIPS R4400MC Errata, Processor Revision 1.0", erratum #5
+ */
+#ifdef CONFIG_CPU_DADDI_WORKAROUNDS
+#define DADDI_WAR 1
+#else
+#define DADDI_WAR 0
+#endif
+
+/*
+ * Another R4600 erratum.  Due to the lack of errata information the exact
+ * technical details aren't known.  I've experimentally found that disabling
+ * interrupts during indexed I-cache flushes seems to be sufficient to deal
+ * with the issue.
+ */
+#ifndef R4600_V1_INDEX_ICACHEOP_WAR
+#error Check setting of R4600_V1_INDEX_ICACHEOP_WAR for your platform
+#endif
+
+/*
+ * Pleasures of the R4600 V1.x.  Cite from the IDT R4600 V1.7 errata:
+ *
+ *  18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
+ *      Hit_Invalidate_D and Create_Dirty_Excl_D should only be
+ *      executed if there is no other dcache activity. If the dcache is
+ *      accessed for another instruction immeidately preceding when these
+ *      cache instructions are executing, it is possible that the dcache
+ *      tag match outputs used by these cache instructions will be
+ *      incorrect. These cache instructions should be preceded by at least
+ *      four instructions that are not any kind of load or store
+ *      instruction.
+ *
+ *      This is not allowed:    lw
+ *                              nop
+ *                              nop
+ *                              nop
+ *                              cache       Hit_Writeback_Invalidate_D
+ *
+ *      This is allowed:        lw
+ *                              nop
+ *                              nop
+ *                              nop
+ *                              nop
+ *                              cache       Hit_Writeback_Invalidate_D
+ */
+#ifndef R4600_V1_HIT_CACHEOP_WAR
+#error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform
+#endif
+
+
+/*
+ * Writeback and invalidate the primary cache dcache before DMA.
+ *
+ * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
+ * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
+ * operate correctly if the internal data cache refill buffer is empty.  These
+ * CACHE instructions should be separated from any potential data cache miss
+ * by a load instruction to an uncached address to empty the response buffer."
+ * (Revision 2.0 device errata from IDT available on http://www.idt.com/
+ * in .pdf format.)
+ */
+#ifndef R4600_V2_HIT_CACHEOP_WAR
+#error Check setting of R4600_V2_HIT_CACHEOP_WAR for your platform
+#endif
+
+/*
+ * When an interrupt happens on a CP0 register read instruction, CPU may
+ * lock up or read corrupted values of CP0 registers after it enters
+ * the exception handler.
+ *
+ * This workaround makes sure that we read a "safe" CP0 register as the
+ * first thing in the exception handler, which breaks one of the
+ * pre-conditions for this problem.
+ */
+#ifndef R5432_CP0_INTERRUPT_WAR
+#error Check setting of R5432_CP0_INTERRUPT_WAR for your platform
+#endif
+
+/*
+ * Workaround for the Sibyte M3 errata the text of which can be found at
+ *
+ *   http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt
+ *
+ * This will enable the use of a special TLB refill handler which does a
+ * consistency check on the information in c0_badvaddr and c0_entryhi and
+ * will just return and take the exception again if the information was
+ * found to be inconsistent.
+ */
+#ifndef BCM1250_M3_WAR
+#error Check setting of BCM1250_M3_WAR for your platform
+#endif
+
+/*
+ * This is a DUART workaround related to glitches around register accesses
+ */
+#ifndef SIBYTE_1956_WAR
+#error Check setting of SIBYTE_1956_WAR for your platform
+#endif
+
+/*
+ * Fill buffers not flushed on CACHE instructions
+ *
+ * Hit_Invalidate_I cacheops invalidate an icache line but the refill
+ * for that line can get stale data from the fill buffer instead of
+ * accessing memory if the previous icache miss was also to that line.
+ *
+ * Workaround: generate an icache refill from a different line
+ *
+ * Affects:
+ *  MIPS 4K		RTL revision <3.0, PRID revision <4
+ */
+#ifndef MIPS4K_ICACHE_REFILL_WAR
+#error Check setting of MIPS4K_ICACHE_REFILL_WAR for your platform
+#endif
+
+/*
+ * Missing implicit forced flush of evictions caused by CACHE
+ * instruction
+ *
+ * Evictions caused by a CACHE instructions are not forced on to the
+ * bus. The BIU gives higher priority to fetches than to the data from
+ * the eviction buffer and no collision detection is performed between
+ * fetches and pending data from the eviction buffer.
+ *
+ * Workaround: Execute a SYNC instruction after the cache instruction
+ *
+ * Affects:
+ *   MIPS 5Kc,5Kf	RTL revision <2.3, PRID revision <8
+ *   MIPS 20Kc		RTL revision <4.0, PRID revision <?
+ */
+#ifndef MIPS_CACHE_SYNC_WAR
+#error Check setting of MIPS_CACHE_SYNC_WAR for your platform
+#endif
+
+/*
+ * From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
+ * the line which this instruction itself exists, the following
+ * operation is not guaranteed."
+ *
+ * Workaround: do two phase flushing for Index_Invalidate_I
+ */
+#ifndef TX49XX_ICACHE_INDEX_INV_WAR
+#error Check setting of TX49XX_ICACHE_INDEX_INV_WAR for your platform
+#endif
+
+/*
+ * On the RM9000 there is a problem which makes the CreateDirtyExclusive
+ * eache operation unusable on SMP systems.
+ */
+#ifndef RM9000_CDEX_SMP_WAR
+#error Check setting of RM9000_CDEX_SMP_WAR for your platform
+#endif
+
+/*
+ * The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
+ * opposes it being called that) where invalid instructions in the same
+ * I-cache line worth of instructions being fetched may case spurious
+ * exceptions.
+ */
+#ifndef ICACHE_REFILLS_WORKAROUND_WAR
+#error Check setting of ICACHE_REFILLS_WORKAROUND_WAR for your platform
+#endif
+
+/*
+ * On the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
+ * may cause ll / sc and lld / scd sequences to execute non-atomically.
+ */
+#ifndef R10000_LLSC_WAR
+#error Check setting of R10000_LLSC_WAR for your platform
+#endif
+
+/*
+ * 34K core erratum: "Problems Executing the TLBR Instruction"
+ */
+#ifndef MIPS34K_MISSED_ITLB_WAR
+#error Check setting of MIPS34K_MISSED_ITLB_WAR for your platform
+#endif
+
+#endif /* _ASM_WAR_H */
diff --git a/arch/mips/include/asm/watch.h b/arch/mips/include/asm/watch.h
new file mode 100644
index 0000000..20126ec
--- /dev/null
+++ b/arch/mips/include/asm/watch.h
@@ -0,0 +1,32 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 David Daney
+ */
+#ifndef _ASM_WATCH_H
+#define _ASM_WATCH_H
+
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+
+void mips_install_watch_registers(void);
+void mips_read_watch_registers(void);
+void mips_clear_watch_registers(void);
+void mips_probe_watch_registers(struct cpuinfo_mips *c);
+
+#ifdef CONFIG_HARDWARE_WATCHPOINTS
+#define __restore_watch() do {						\
+	if (unlikely(test_bit(TIF_LOAD_WATCH,				\
+			      &current_thread_info()->flags))) {	\
+		mips_install_watch_registers();				\
+	}								\
+} while (0)
+
+#else
+#define __restore_watch() do {} while (0)
+#endif
+
+#endif /* _ASM_WATCH_H */
diff --git a/arch/mips/include/asm/wbflush.h b/arch/mips/include/asm/wbflush.h
new file mode 100644
index 0000000..eadc0ac
--- /dev/null
+++ b/arch/mips/include/asm/wbflush.h
@@ -0,0 +1,34 @@
+/*
+ * Header file for using the wbflush routine
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1998 Harald Koerfgen
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+#ifndef _ASM_WBFLUSH_H
+#define _ASM_WBFLUSH_H
+
+
+#ifdef CONFIG_CPU_HAS_WB
+
+extern void (*__wbflush)(void);
+extern void wbflush_setup(void);
+
+#define wbflush()			\
+	do {				\
+		__sync();		\
+		__wbflush();		\
+	} while (0)
+
+#else /* !CONFIG_CPU_HAS_WB */
+
+#define wbflush_setup() do { } while (0)
+
+#define wbflush() fast_iob()
+
+#endif /* !CONFIG_CPU_HAS_WB */
+
+#endif /* _ASM_WBFLUSH_H */
diff --git a/arch/mips/include/asm/xor.h b/arch/mips/include/asm/xor.h
new file mode 100644
index 0000000..c82eb12
--- /dev/null
+++ b/arch/mips/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h
new file mode 100644
index 0000000..79bac88
--- /dev/null
+++ b/arch/mips/include/asm/xtalk/xtalk.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * xtalk.h -- platform-independent crosstalk interface, derived from
+ * IRIX <sys/PCI/bridge.h>, revision 1.38.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_XTALK_XTALK_H
+#define _ASM_XTALK_XTALK_H
+
+#ifndef __ASSEMBLY__
+/*
+ * User-level device driver visible types
+ */
+typedef char            xwidgetnum_t;	/* xtalk widget number  (0..15) */
+
+#define XWIDGET_NONE		-1
+
+typedef int xwidget_part_num_t;	/* xtalk widget part number */
+
+#define XWIDGET_PART_NUM_NONE	-1
+
+typedef int             xwidget_rev_num_t;	/* xtalk widget revision number */
+
+#define XWIDGET_REV_NUM_NONE	-1
+
+typedef int xwidget_mfg_num_t;	/* xtalk widget manufacturing ID */
+
+#define XWIDGET_MFG_NUM_NONE	-1
+
+typedef struct xtalk_piomap_s *xtalk_piomap_t;
+
+/* It is often convenient to fold the XIO target port
+ * number into the XIO address.
+ */
+#define	XIO_NOWHERE	(0xFFFFFFFFFFFFFFFFull)
+#define	XIO_ADDR_BITS	(0x0000FFFFFFFFFFFFull)
+#define	XIO_PORT_BITS	(0xF000000000000000ull)
+#define	XIO_PORT_SHIFT	(60)
+
+#define	XIO_PACKED(x)	(((x)&XIO_PORT_BITS) != 0)
+#define	XIO_ADDR(x)	((x)&XIO_ADDR_BITS)
+#define	XIO_PORT(x)	((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
+#define	XIO_PACK(p, o)	((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_XTALK_XTALK_H */
diff --git a/arch/mips/include/asm/xtalk/xwidget.h b/arch/mips/include/asm/xtalk/xwidget.h
new file mode 100644
index 0000000..b4a13d7
--- /dev/null
+++ b/arch/mips/include/asm/xtalk/xwidget.h
@@ -0,0 +1,167 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * xwidget.h - generic crosstalk widget header file, derived from IRIX
+ * <sys/xtalk/xtalkwidget.h>, revision 1.32.
+ *
+ * Copyright (C) 1996, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_XTALK_XWIDGET_H
+#define _ASM_XTALK_XWIDGET_H
+
+#include <linux/types.h>
+#include <asm/xtalk/xtalk.h>
+
+#define WIDGET_ID			0x04
+#define WIDGET_STATUS			0x0c
+#define WIDGET_ERR_UPPER_ADDR		0x14
+#define WIDGET_ERR_LOWER_ADDR		0x1c
+#define WIDGET_CONTROL			0x24
+#define WIDGET_REQ_TIMEOUT		0x2c
+#define WIDGET_INTDEST_UPPER_ADDR	0x34
+#define WIDGET_INTDEST_LOWER_ADDR	0x3c
+#define WIDGET_ERR_CMD_WORD		0x44
+#define WIDGET_LLP_CFG			0x4c
+#define WIDGET_TFLUSH			0x54
+
+/* WIDGET_ID */
+#define WIDGET_REV_NUM			0xf0000000
+#define WIDGET_PART_NUM			0x0ffff000
+#define WIDGET_MFG_NUM			0x00000ffe
+#define WIDGET_REV_NUM_SHFT		28
+#define WIDGET_PART_NUM_SHFT		12
+#define WIDGET_MFG_NUM_SHFT		1
+
+#define XWIDGET_PART_NUM(widgetid) (((widgetid) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT)
+#define XWIDGET_REV_NUM(widgetid) (((widgetid) & WIDGET_REV_NUM) >> WIDGET_REV_NUM_SHFT)
+#define XWIDGET_MFG_NUM(widgetid) (((widgetid) & WIDGET_MFG_NUM) >> WIDGET_MFG_NUM_SHFT)
+
+/* WIDGET_STATUS */
+#define WIDGET_LLP_REC_CNT		0xff000000
+#define WIDGET_LLP_TX_CNT		0x00ff0000
+#define WIDGET_PENDING			0x0000001f
+
+/* WIDGET_ERR_UPPER_ADDR */
+#define	WIDGET_ERR_UPPER_ADDR_ONLY	0x0000ffff
+
+/* WIDGET_CONTROL */
+#define WIDGET_F_BAD_PKT		0x00010000
+#define WIDGET_LLP_XBAR_CRD		0x0000f000
+#define	WIDGET_LLP_XBAR_CRD_SHFT	12
+#define WIDGET_CLR_RLLP_CNT		0x00000800
+#define WIDGET_CLR_TLLP_CNT		0x00000400
+#define WIDGET_SYS_END			0x00000200
+#define WIDGET_MAX_TRANS		0x000001f0
+#define WIDGET_WIDGET_ID		0x0000000f
+
+/* WIDGET_INTDEST_UPPER_ADDR */
+#define WIDGET_INT_VECTOR		0xff000000
+#define WIDGET_INT_VECTOR_SHFT		24
+#define WIDGET_TARGET_ID		0x000f0000
+#define WIDGET_TARGET_ID_SHFT		16
+#define WIDGET_UPP_ADDR			0x0000ffff
+
+/* WIDGET_ERR_CMD_WORD */
+#define WIDGET_DIDN			0xf0000000
+#define WIDGET_SIDN			0x0f000000
+#define WIDGET_PACTYP			0x00f00000
+#define WIDGET_TNUM			0x000f8000
+#define WIDGET_COHERENT			0x00004000
+#define WIDGET_DS			0x00003000
+#define WIDGET_GBR			0x00000800
+#define WIDGET_VBPM			0x00000400
+#define WIDGET_ERROR			0x00000200
+#define WIDGET_BARRIER			0x00000100
+
+/* WIDGET_LLP_CFG */
+#define WIDGET_LLP_MAXRETRY		0x03ff0000
+#define WIDGET_LLP_MAXRETRY_SHFT	16
+#define WIDGET_LLP_NULLTIMEOUT		0x0000fc00
+#define WIDGET_LLP_NULLTIMEOUT_SHFT	10
+#define WIDGET_LLP_MAXBURST		0x000003ff
+#define WIDGET_LLP_MAXBURST_SHFT	0
+
+/*
+ * according to the crosstalk spec, only 32-bits access to the widget
+ * configuration registers is allowed.  some widgets may allow 64-bits
+ * access but software should not depend on it.  registers beyond the
+ * widget target flush register are widget dependent thus will not be
+ * defined here
+ */
+#ifndef __ASSEMBLY__
+typedef u32 widgetreg_t;
+
+/* widget configuration registers */
+typedef volatile struct widget_cfg {
+	widgetreg_t		w_pad_0;		/* 0x00 */
+	widgetreg_t		w_id;			/* 0x04 */
+	widgetreg_t		w_pad_1;		/* 0x08 */
+	widgetreg_t		w_status;		/* 0x0c */
+	widgetreg_t		w_pad_2;		/* 0x10 */
+	widgetreg_t		w_err_upper_addr;	/* 0x14 */
+	widgetreg_t		w_pad_3;		/* 0x18 */
+	widgetreg_t		w_err_lower_addr;	/* 0x1c */
+	widgetreg_t		w_pad_4;		/* 0x20 */
+	widgetreg_t		w_control;		/* 0x24 */
+	widgetreg_t		w_pad_5;		/* 0x28 */
+	widgetreg_t		w_req_timeout;		/* 0x2c */
+	widgetreg_t		w_pad_6;		/* 0x30 */
+	widgetreg_t		w_intdest_upper_addr;	/* 0x34 */
+	widgetreg_t		w_pad_7;		/* 0x38 */
+	widgetreg_t		w_intdest_lower_addr;	/* 0x3c */
+	widgetreg_t		w_pad_8;		/* 0x40 */
+	widgetreg_t		w_err_cmd_word;		/* 0x44 */
+	widgetreg_t		w_pad_9;		/* 0x48 */
+	widgetreg_t		w_llp_cfg;		/* 0x4c */
+	widgetreg_t		w_pad_10;		/* 0x50 */
+	widgetreg_t		w_tflush;		/* 0x54 */
+} widget_cfg_t;
+
+typedef struct {
+	unsigned	didn:4;
+	unsigned	sidn:4;
+	unsigned	pactyp:4;
+	unsigned	tnum:5;
+	unsigned	ct:1;
+	unsigned	ds:2;
+	unsigned	gbr:1;
+	unsigned	vbpm:1;
+	unsigned	error:1;
+	unsigned	bo:1;
+	unsigned	other:8;
+} w_err_cmd_word_f;
+
+typedef union {
+	widgetreg_t		r;
+	w_err_cmd_word_f	f;
+} w_err_cmd_word_u;
+
+typedef struct xwidget_info_s *xwidget_info_t;
+
+/*
+ * Crosstalk Widget Hardware Identification, as defined in the Crosstalk spec.
+ */
+typedef struct xwidget_hwid_s {
+	xwidget_part_num_t	part_num;
+	xwidget_rev_num_t	rev_num;
+	xwidget_mfg_num_t	mfg_num;
+} *xwidget_hwid_t;
+
+
+/*
+ * Returns 1 if a driver that handles devices described by hwid1 is able
+ * to manage a device with hardwareid hwid2.  NOTE: We don't check rev
+ * numbers at all.
+ */
+#define XWIDGET_HARDWARE_ID_MATCH(hwid1, hwid2) \
+	(((hwid1)->part_num == (hwid2)->part_num) && \
+	(((hwid1)->mfg_num == XWIDGET_MFG_NUM_NONE) || \
+	((hwid2)->mfg_num == XWIDGET_MFG_NUM_NONE) || \
+	((hwid1)->mfg_num == (hwid2)->mfg_num)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_XTALK_XWIDGET_H */
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 706f939..d9da711 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -6,10 +6,11 @@ extra-y		:= head.o init_task.o vmlinux.lds
 
 obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 		   ptrace.o reset.o setup.o signal.o syscall.o \
-		   time.o topology.o traps.o unaligned.o
+		   time.o topology.o traps.o unaligned.o watch.o
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
+obj-$(CONFIG_MIPS_MT_SMTC)	+= cevt-smtc.o
 obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
 obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
 obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 24a2d90..4a4c59f 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -12,6 +12,14 @@
 
 #include <asm/smtc_ipi.h>
 #include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+ * of these routines with SMTC-specific variants.
+ */
+
+#ifndef CONFIG_MIPS_MT_SMTC
 
 static int mips_next_event(unsigned long delta,
                            struct clock_event_device *evt)
@@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta,
 	unsigned int cnt;
 	int res;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	{
-	unsigned long flags, vpflags;
-	local_irq_save(flags);
-	vpflags = dvpe();
-#endif
 	cnt = read_c0_count();
 	cnt += delta;
 	write_c0_compare(cnt);
 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-#ifdef CONFIG_MIPS_MT_SMTC
-	evpe(vpflags);
-	local_irq_restore(flags);
-	}
-#endif
 	return res;
 }
 
-static void mips_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+void mips_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
 {
 	/* Nothing to do ...  */
 }
 
-static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
-static int cp0_timer_irq_installed;
+DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+int cp0_timer_irq_installed;
 
-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
-{
-	write_c0_compare(read_c0_compare());
-}
+#ifndef CONFIG_MIPS_MT_SMTC
 
-/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
- */
-static inline int handle_perf_irq(int r2)
-{
-	/*
-	 * The performance counter overflow interrupt may be shared with the
-	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
-	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
-	 * and we can't reliably determine if a counter interrupt has also
-	 * happened (!r2) then don't check for a timer interrupt.
-	 */
-	return (cp0_perfcount_irq < 0) &&
-		perf_irq() == IRQ_HANDLED &&
-		!r2;
-}
-
-static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 {
 	const int r2 = cpu_has_mips_r2;
 	struct clock_event_device *cd;
@@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 	 * interrupt.  Being the paranoiacs we are we check anyway.
 	 */
 	if (!r2 || (read_c0_cause() & (1 << 30))) {
-		c0_timer_ack();
-#ifdef CONFIG_MIPS_MT_SMTC
-		if (cpu_data[cpu].vpe_id)
-			goto out;
-		cpu = 0;
-#endif
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
 		cd = &per_cpu(mips_clockevent_device, cpu);
 		cd->event_handler(cd);
 	}
@@ -107,65 +78,16 @@ out:
 	return IRQ_HANDLED;
 }
 
-static struct irqaction c0_compare_irqaction = {
+#endif /* Not CONFIG_MIPS_MT_SMTC */
+
+struct irqaction c0_compare_irqaction = {
 	.handler = c0_compare_interrupt,
-#ifdef CONFIG_MIPS_MT_SMTC
-	.flags = IRQF_DISABLED,
-#else
 	.flags = IRQF_DISABLED | IRQF_PERCPU,
-#endif
 	.name = "timer",
 };
 
-#ifdef CONFIG_MIPS_MT_SMTC
-DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
-
-static void smtc_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
-{
-}
-
-static void mips_broadcast(cpumask_t mask)
-{
-	unsigned int cpu;
-
-	for_each_cpu_mask(cpu, mask)
-		smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
-}
-
-static void setup_smtc_dummy_clockevent_device(void)
-{
-	//uint64_t mips_freq = mips_hpt_^frequency;
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
 
-	cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-
-	cd->name		= "SMTC";
-	cd->features		= CLOCK_EVT_FEAT_DUMMY;
-
-	/* Calculate the min / max delta */
-	cd->mult	= 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
-	cd->shift		= 0; //32;
-	cd->max_delta_ns	= 0; //clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns	= 0; //clockevent_delta2ns(0x30, cd);
-
-	cd->rating		= 200;
-	cd->irq			= 17; //-1;
-//	if (cpu)
-//		cd->cpumask	= CPU_MASK_ALL; // cpumask_of_cpu(cpu);
-//	else
-		cd->cpumask	= cpumask_of_cpu(cpu);
-
-	cd->set_mode		= smtc_set_mode;
-
-	cd->broadcast		= mips_broadcast;
-
-	clockevents_register_device(cd);
-}
-#endif
-
-static void mips_event_handler(struct clock_event_device *dev)
+void mips_event_handler(struct clock_event_device *dev)
 {
 }
 
@@ -177,7 +99,23 @@ static int c0_compare_int_pending(void)
 	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
 }
 
-static int c0_compare_int_usable(void)
+/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register.  4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+	do { \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+	} while (0)
+
+int c0_compare_int_usable(void)
 {
 	unsigned int delta;
 	unsigned int cnt;
@@ -187,7 +125,7 @@ static int c0_compare_int_usable(void)
 	 */
 	if (c0_compare_int_pending()) {
 		write_c0_compare(read_c0_count());
-		irq_disable_hazard();
+		compare_change_hazard();
 		if (c0_compare_int_pending())
 			return 0;
 	}
@@ -196,7 +134,7 @@ static int c0_compare_int_usable(void)
 		cnt = read_c0_count();
 		cnt += delta;
 		write_c0_compare(cnt);
-		irq_disable_hazard();
+		compare_change_hazard();
 		if ((int)(read_c0_count() - cnt) < 0)
 		    break;
 		/* increase delta if the timer was already expired */
@@ -205,11 +143,12 @@ static int c0_compare_int_usable(void)
 	while ((int)(read_c0_count() - cnt) <= 0)
 		;	/* Wait for expiry  */
 
+	compare_change_hazard();
 	if (!c0_compare_int_pending())
 		return 0;
 
 	write_c0_compare(read_c0_count());
-	irq_disable_hazard();
+	compare_change_hazard();
 	if (c0_compare_int_pending())
 		return 0;
 
@@ -219,6 +158,8 @@ static int c0_compare_int_usable(void)
 	return 1;
 }
 
+#ifndef CONFIG_MIPS_MT_SMTC
+
 int __cpuinit mips_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
@@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void)
 	if (!cpu_has_counter || !mips_hpt_frequency)
 		return -ENXIO;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	setup_smtc_dummy_clockevent_device();
-
-	/*
-	 * On SMTC we only register VPE0's compare interrupt as clockevent
-	 * device.
-	 */
-	if (cpu)
-		return 0;
-#endif
-
 	if (!c0_compare_int_usable())
 		return -ENXIO;
 
@@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void)
 
 	cd->rating		= 300;
 	cd->irq			= irq;
-#ifdef CONFIG_MIPS_MT_SMTC
-	cd->cpumask		= CPU_MASK_ALL;
-#else
 	cd->cpumask		= cpumask_of_cpu(cpu);
-#endif
 	cd->set_next_event	= mips_next_event;
-	cd->set_mode		= mips_set_mode;
+	cd->set_mode		= mips_set_clock_mode;
 	cd->event_handler	= mips_event_handler;
 
 	clockevents_register_device(cd);
@@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void)
 
 	cp0_timer_irq_installed = 1;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
-	setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
-#else
 	setup_irq(irq, &c0_compare_irqaction);
-#endif
 
 	return 0;
 }
+
+#endif /* Not CONFIG_MIPS_MT_SMTC */
diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c
new file mode 100644
index 0000000..5162fe4
--- /dev/null
+++ b/arch/mips/kernel/cevt-smtc.c
@@ -0,0 +1,321 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/smtc_ipi.h>
+#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * Variant clock event timer support for SMTC on MIPS 34K, 1004K
+ * or other MIPS MT cores.
+ *
+ * Notes on SMTC Support:
+ *
+ * SMTC has multiple microthread TCs pretending to be Linux CPUs.
+ * But there's only one Count/Compare pair per VPE, and Compare
+ * interrupts are taken opportunisitically by available TCs
+ * bound to the VPE with the Count register.  The new timer
+ * framework provides for global broadcasts, but we really
+ * want VPE-level multicasts for best behavior. So instead
+ * of invoking the high-level clock-event broadcast code,
+ * this version of SMTC support uses the historical SMTC
+ * multicast mechanisms "under the hood", appearing to the
+ * generic clock layer as if the interrupts are per-CPU.
+ *
+ * The approach taken here is to maintain a set of NR_CPUS
+ * virtual timers, and track which "CPU" needs to be alerted
+ * at each event.
+ *
+ * It's unlikely that we'll see a MIPS MT core with more than
+ * 2 VPEs, but we *know* that we won't need to handle more
+ * VPEs than we have "CPUs".  So NCPUs arrays of NCPUs elements
+ * is always going to be overkill, but always going to be enough.
+ */
+
+unsigned long smtc_nexttime[NR_CPUS][NR_CPUS];
+static int smtc_nextinvpe[NR_CPUS];
+
+/*
+ * Timestamps stored are absolute values to be programmed
+ * into Count register.  Valid timestamps will never be zero.
+ * If a Zero Count value is actually calculated, it is converted
+ * to be a 1, which will introduce 1 or two CPU cycles of error
+ * roughly once every four billion events, which at 1000 HZ means
+ * about once every 50 days.  If that's actually a problem, one
+ * could alternate squashing 0 to 1 and to -1.
+ */
+
+#define MAKEVALID(x) (((x) == 0L) ? 1L : (x))
+#define ISVALID(x) ((x) != 0L)
+
+/*
+ * Time comparison is subtle, as it's really truncated
+ * modular arithmetic.
+ */
+
+#define IS_SOONER(a, b, reference) \
+    (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference)))
+
+/*
+ * CATCHUP_INCREMENT, used when the function falls behind the counter.
+ * Could be an increasing function instead of a constant;
+ */
+
+#define CATCHUP_INCREMENT 64
+
+static int mips_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	unsigned long flags;
+	unsigned int mtflags;
+	unsigned long timestamp, reference, previous;
+	unsigned long nextcomp = 0L;
+	int vpe = current_cpu_data.vpe_id;
+	int cpu = smp_processor_id();
+	local_irq_save(flags);
+	mtflags = dmt();
+
+	/*
+	 * Maintain the per-TC virtual timer
+	 * and program the per-VPE shared Count register
+	 * as appropriate here...
+	 */
+	reference = (unsigned long)read_c0_count();
+	timestamp = MAKEVALID(reference + delta);
+	/*
+	 * To really model the clock, we have to catch the case
+	 * where the current next-in-VPE timestamp is the old
+	 * timestamp for the calling CPE, but the new value is
+	 * in fact later.  In that case, we have to do a full
+	 * scan and discover the new next-in-VPE CPU id and
+	 * timestamp.
+	 */
+	previous = smtc_nexttime[vpe][cpu];
+	if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous)
+	    && IS_SOONER(previous, timestamp, reference)) {
+		int i;
+		int soonest = cpu;
+
+		/*
+		 * Update timestamp array here, so that new
+		 * value gets considered along with those of
+		 * other virtual CPUs on the VPE.
+		 */
+		smtc_nexttime[vpe][cpu] = timestamp;
+		for_each_online_cpu(i) {
+			if (ISVALID(smtc_nexttime[vpe][i])
+			    && IS_SOONER(smtc_nexttime[vpe][i],
+				smtc_nexttime[vpe][soonest], reference)) {
+				    soonest = i;
+			}
+		}
+		smtc_nextinvpe[vpe] = soonest;
+		nextcomp = smtc_nexttime[vpe][soonest];
+	/*
+	 * Otherwise, we don't have to process the whole array rank,
+	 * we just have to see if the event horizon has gotten closer.
+	 */
+	} else {
+		if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) ||
+		    IS_SOONER(timestamp,
+			smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) {
+			    smtc_nextinvpe[vpe] = cpu;
+			    nextcomp = timestamp;
+		}
+		/*
+		 * Since next-in-VPE may me the same as the executing
+		 * virtual CPU, we update the array *after* checking
+		 * its value.
+		 */
+		smtc_nexttime[vpe][cpu] = timestamp;
+	}
+
+	/*
+	 * It may be that, in fact, we don't need to update Compare,
+	 * but if we do, we want to make sure we didn't fall into
+	 * a crack just behind Count.
+	 */
+	if (ISVALID(nextcomp)) {
+		write_c0_compare(nextcomp);
+		ehb();
+		/*
+		 * We never return an error, we just make sure
+		 * that we trigger the handlers as quickly as
+		 * we can if we fell behind.
+		 */
+		while ((nextcomp - (unsigned long)read_c0_count())
+			> (unsigned long)LONG_MAX) {
+			nextcomp += CATCHUP_INCREMENT;
+			write_c0_compare(nextcomp);
+			ehb();
+		}
+	}
+	emt(mtflags);
+	local_irq_restore(flags);
+	return 0;
+}
+
+
+void smtc_distribute_timer(int vpe)
+{
+	unsigned long flags;
+	unsigned int mtflags;
+	int cpu;
+	struct clock_event_device *cd;
+	unsigned long nextstamp = 0L;
+	unsigned long reference;
+
+
+repeat:
+	for_each_online_cpu(cpu) {
+	    /*
+	     * Find virtual CPUs within the current VPE who have
+	     * unserviced timer requests whose time is now past.
+	     */
+	    local_irq_save(flags);
+	    mtflags = dmt();
+	    if (cpu_data[cpu].vpe_id == vpe &&
+		ISVALID(smtc_nexttime[vpe][cpu])) {
+		reference = (unsigned long)read_c0_count();
+		if ((smtc_nexttime[vpe][cpu] - reference)
+			 > (unsigned long)LONG_MAX) {
+			    smtc_nexttime[vpe][cpu] = 0L;
+			    emt(mtflags);
+			    local_irq_restore(flags);
+			    /*
+			     * We don't send IPIs to ourself.
+			     */
+			    if (cpu != smp_processor_id()) {
+				smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
+			    } else {
+				cd = &per_cpu(mips_clockevent_device, cpu);
+				cd->event_handler(cd);
+			    }
+		} else {
+			/* Local to VPE but Valid Time not yet reached. */
+			if (!ISVALID(nextstamp) ||
+			    IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp,
+			    reference)) {
+				smtc_nextinvpe[vpe] = cpu;
+				nextstamp = smtc_nexttime[vpe][cpu];
+			}
+			emt(mtflags);
+			local_irq_restore(flags);
+		}
+	    } else {
+		emt(mtflags);
+		local_irq_restore(flags);
+
+	    }
+	}
+	/* Reprogram for interrupt at next soonest timestamp for VPE */
+	if (ISVALID(nextstamp)) {
+		write_c0_compare(nextstamp);
+		ehb();
+		if ((nextstamp - (unsigned long)read_c0_count())
+			> (unsigned long)LONG_MAX)
+				goto repeat;
+	}
+}
+
+
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	/* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */
+	handle_perf_irq(1);
+
+	if (read_c0_cause() & (1 << 30)) {
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
+		smtc_distribute_timer(cpu_data[cpu].vpe_id);
+	}
+	return IRQ_HANDLED;
+}
+
+
+int __cpuinit mips_clockevent_init(void)
+{
+	uint64_t mips_freq = mips_hpt_frequency;
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd;
+	unsigned int irq;
+	int i;
+	int j;
+
+	if (!cpu_has_counter || !mips_hpt_frequency)
+		return -ENXIO;
+	if (cpu == 0) {
+		for (i = 0; i < num_possible_cpus(); i++) {
+			smtc_nextinvpe[i] = 0;
+			for (j = 0; j < num_possible_cpus(); j++)
+				smtc_nexttime[i][j] = 0L;
+		}
+		/*
+		 * SMTC also can't have the usablility test
+		 * run by secondary TCs once Compare is in use.
+		 */
+		if (!c0_compare_int_usable())
+			return -ENXIO;
+	}
+
+	/*
+	 * With vectored interrupts things are getting platform specific.
+	 * get_c0_compare_int is a hook to allow a platform to return the
+	 * interrupt number of it's liking.
+	 */
+	irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+	if (get_c0_compare_int)
+		irq = get_c0_compare_int();
+
+	cd = &per_cpu(mips_clockevent_device, cpu);
+
+	cd->name		= "MIPS";
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
+
+	/* Calculate the min / max delta */
+	cd->mult	= div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
+	cd->shift		= 32;
+	cd->max_delta_ns	= clockevent_delta2ns(0x7fffffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(0x300, cd);
+
+	cd->rating		= 300;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of_cpu(cpu);
+	cd->set_next_event	= mips_next_event;
+	cd->set_mode		= mips_set_clock_mode;
+	cd->event_handler	= mips_event_handler;
+
+	clockevents_register_device(cd);
+
+	/*
+	 * On SMTC we only want to do the data structure
+	 * initialization and IRQ setup once.
+	 */
+	if (cpu)
+		return 0;
+	/*
+	 * And we need the hwmask associated with the c0_compare
+	 * vector to be initialized.
+	 */
+	irq_hwmask[irq] = (0x100 << cp0_compare_irq);
+	if (cp0_timer_irq_installed)
+		return 0;
+
+	cp0_timer_irq_installed = 1;
+
+	setup_irq(irq, &c0_compare_irqaction);
+
+	return 0;
+}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 11c92dc..0cf1545 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -21,6 +21,7 @@
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
 #include <asm/system.h>
+#include <asm/watch.h>
 
 /*
  * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
@@ -54,14 +55,18 @@ extern void r4k_wait(void);
  * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
  * using this version a gamble.
  */
-static void r4k_wait_irqoff(void)
+void r4k_wait_irqoff(void)
 {
 	local_irq_disable();
 	if (!need_resched())
-		__asm__("	.set	mips3		\n"
+		__asm__("	.set	push		\n"
+			"	.set	mips3		\n"
 			"	wait			\n"
-			"	.set	mips0		\n");
+			"	.set	pop		\n");
 	local_irq_enable();
+	__asm__(" 	.globl __pastwait	\n"
+		"__pastwait:			\n");
+	return;
 }
 
 /*
@@ -673,6 +678,7 @@ static inline void spram_config(void) {}
 static inline void cpu_probe_mips(struct cpuinfo_mips *c)
 {
 	decode_configs(c);
+	mips_probe_watch_registers(c);
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_4KC:
 		c->cputype = CPU_4KC;
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index e29598a..ffa3310 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -79,11 +79,6 @@ FEXPORT(syscall_exit)
 
 FEXPORT(restore_all)			# restore full frame
 #ifdef CONFIG_MIPS_MT_SMTC
-/* Detect and execute deferred IPI "interrupts" */
-	LONG_L	s0, TI_REGS($28)
-	LONG_S	sp, TI_REGS($28)
-	jal	deferred_smtc_ipi
-	LONG_S	s0, TI_REGS($28)
 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
 /* Re-arm any temporarily masked interrupts not explicitly "acked" */
 	mfc0	v0, CP0_TCSTATUS
@@ -112,6 +107,11 @@ FEXPORT(restore_all)			# restore full frame
 	xor	t0, t0, t3
 	mtc0	t0, CP0_TCCONTEXT
 #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
+/* Detect and execute deferred IPI "interrupts" */
+	LONG_L	s0, TI_REGS($28)
+	LONG_S	sp, TI_REGS($28)
+	jal	deferred_smtc_ipi
+	LONG_S	s0, TI_REGS($28)
 #endif /* CONFIG_MIPS_MT_SMTC */
 	.set	noat
 	RESTORE_TEMP
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index f886dd7..757d48f 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -282,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp)
 	and	t0, a0, t1
 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
 	mfc0	t2, CP0_TCCONTEXT
-	or	t0, t0, t2
-	mtc0	t0, CP0_TCCONTEXT
+	or	t2, t0, t2
+	mtc0	t2, CP0_TCCONTEXT
 #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
 	xor	t1, t1, t0
 	mtc0	t1, CP0_STATUS
@@ -453,7 +453,11 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	BUILD_HANDLER tr tr sti silent			/* #13 */
 	BUILD_HANDLER fpe fpe fpe silent		/* #15 */
 	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
+#ifdef 	CONFIG_HARDWARE_WATCHPOINTS
+	BUILD_HANDLER watch watch sti silent		/* #23 */
+#else
 	BUILD_HANDLER watch watch sti verbose		/* #23 */
+#endif
 	BUILD_HANDLER mcheck mcheck cli verbose		/* #24 */
 	BUILD_HANDLER mt mt sti silent			/* #25 */
 	BUILD_HANDLER dsp dsp sti silent		/* #26 */
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 3613645..492a0a8 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -22,6 +22,7 @@
 #include <asm/irqflags.h>
 #include <asm/regdef.h>
 #include <asm/page.h>
+#include <asm/pgtable-bits.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
 
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 8f6d58e..6e152c8 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -236,8 +236,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 
 		atomic_set(&kgdb_cpu_doing_single_step, -1);
 		if (remcom_in_buffer[0] == 's')
-			if (kgdb_contthread)
-				atomic_set(&kgdb_cpu_doing_single_step, cpu);
+			atomic_set(&kgdb_cpu_doing_single_step, cpu);
 
 		return 0;
 	}
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 2fefb14..aa2c55e 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -63,41 +63,6 @@
 #define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL))
 #endif
 
-/*
- * Revalidate the inode. This is required for proper NFS attribute caching.
- */
-
-int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
-{
-	struct compat_stat tmp;
-
-	if (!new_valid_dev(stat->dev) || !new_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-
-	memset(&tmp, 0, sizeof(tmp));
-	tmp.st_dev = new_encode_dev(stat->dev);
-	tmp.st_ino = stat->ino;
-	if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino)
-		return -EOVERFLOW;
-	tmp.st_mode = stat->mode;
-	tmp.st_nlink = stat->nlink;
-	SET_UID(tmp.st_uid, stat->uid);
-	SET_GID(tmp.st_gid, stat->gid);
-	tmp.st_rdev = new_encode_dev(stat->rdev);
-	tmp.st_size = stat->size;
-	tmp.st_atime = stat->atime.tv_sec;
-	tmp.st_mtime = stat->mtime.tv_sec;
-	tmp.st_ctime = stat->ctime.tv_sec;
-#ifdef STAT_HAVE_NSEC
-	tmp.st_atime_nsec = stat->atime.tv_nsec;
-	tmp.st_mtime_nsec = stat->mtime.tv_nsec;
-	tmp.st_ctime_nsec = stat->ctime.tv_nsec;
-#endif
-	tmp.st_blocks = stat->blocks;
-	tmp.st_blksize = stat->blksize;
-	return copy_to_user(statbuf, &tmp, sizeof(tmp)) ? -EFAULT : 0;
-}
-
 asmlinkage unsigned long
 sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
          unsigned long flags, unsigned long fd, unsigned long pgoff)
@@ -168,72 +133,6 @@ asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
 	return sys_ftruncate(fd, merge_64(a2, a3));
 }
 
-static inline long
-get_tv32(struct timeval *o, struct compat_timeval __user *i)
-{
-	return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
-		(__get_user(o->tv_sec, &i->tv_sec) |
-		 __get_user(o->tv_usec, &i->tv_usec)));
-}
-
-static inline long
-put_tv32(struct compat_timeval __user *o, struct timeval *i)
-{
-	return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
-		(__put_user(i->tv_sec, &o->tv_sec) |
-		 __put_user(i->tv_usec, &o->tv_usec)));
-}
-
-extern struct timezone sys_tz;
-
-asmlinkage int
-sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
-{
-	if (tv) {
-		struct timeval ktv;
-		do_gettimeofday(&ktv);
-		if (put_tv32(tv, &ktv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
-{
-	long usec;
-
-	if (!access_ok(VERIFY_READ, i, sizeof(*i)))
-		return -EFAULT;
-	if (__get_user(o->tv_sec, &i->tv_sec))
-		return -EFAULT;
-	if (__get_user(usec, &i->tv_usec))
-		return -EFAULT;
-	o->tv_nsec = usec * 1000;
-		return 0;
-}
-
-asmlinkage int
-sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
-{
-	struct timespec kts;
-	struct timezone ktz;
-
- 	if (tv) {
-		if (get_ts32(&kts, tv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_from_user(&ktz, tz, sizeof(ktz)))
-			return -EFAULT;
-	}
-
-	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
-}
-
 asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
 			    unsigned int offset_low, loff_t __user * result,
 			    unsigned int origin)
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index df4d3f2..dc9eb72 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -159,7 +159,7 @@ __setup("fpaff=", fpaff_thresh);
 /*
  * FPU Use Factor empirically derived from experiments on 34K
  */
-#define FPUSEFACTOR 333
+#define FPUSEFACTOR 2000
 
 static __init int mt_fp_affinity_init(void)
 {
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 36f0653..26760ca 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -23,6 +23,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	unsigned int version = cpu_data[n].processor_id;
 	unsigned int fp_vers = cpu_data[n].fpu_id;
 	char fmt [64];
+	int i;
 
 #ifdef CONFIG_SMP
 	if (!cpu_isset(n, cpu_online_map))
@@ -38,7 +39,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "processor\t\t: %ld\n", n);
 	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
 	        cpu_data[n].options & MIPS_CPU_FPU ? "  FPU V%d.%d" : "");
-	seq_printf(m, fmt, __cpu_name[smp_processor_id()],
+	seq_printf(m, fmt, __cpu_name[n],
 	                           (version >> 4) & 0x0f, version & 0x0f,
 	                           (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
 	seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
@@ -50,8 +51,16 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "tlb_entries\t\t: %d\n", cpu_data[n].tlbsize);
 	seq_printf(m, "extra interrupt vector\t: %s\n",
 	              cpu_has_divec ? "yes" : "no");
-	seq_printf(m, "hardware watchpoint\t: %s\n",
-	              cpu_has_watch ? "yes" : "no");
+	seq_printf(m, "hardware watchpoint\t: %s",
+		   cpu_has_watch ? "yes, " : "no\n");
+	if (cpu_has_watch) {
+		seq_printf(m, "count: %d, address/irw mask: [",
+			   cpu_data[n].watch_reg_count);
+		for (i = 0; i < cpu_data[n].watch_reg_count; i++)
+			seq_printf(m, "%s0x%04x", i ? ", " : "" ,
+				   cpu_data[n].watch_reg_masks[i]);
+		seq_printf(m, "]\n");
+	}
 	seq_printf(m, "ASEs implemented\t:%s%s%s%s%s%s\n",
 		      cpu_has_mips16 ? " mips16" : "",
 		      cpu_has_mdmx ? " mdmx" : "",
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index ce76843..ca2e402 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -22,7 +22,6 @@
 #include <linux/personality.h>
 #include <linux/sys.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/init.h>
 #include <linux/completion.h>
 #include <linux/kallsyms.h>
@@ -55,7 +54,7 @@ void __noreturn cpu_idle(void)
 	while (1) {
 		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
+#ifdef CONFIG_MIPS_MT_SMTC
 			extern void smtc_idle_loop_hook(void);
 
 			smtc_idle_loop_hook();
@@ -145,19 +144,18 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	 */
 	p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1);
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC restores TCStatus after Status, and the CU bits
+	 * are aliased there.
+	 */
+	childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1);
+#endif
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
 #ifdef CONFIG_MIPS_MT_FPAFF
 	clear_tsk_thread_flag(p, TIF_FPUBOUND);
-
-	/*
-	 * FPU affinity support is cleaner if we track the
-	 * user-visible CPU affinity from the very beginning.
-	 * The generic cpus_allowed mask will already have
-	 * been copied from the parent before copy_thread
-	 * is invoked.
-	 */
-	p->thread.user_cpus_allowed = p->cpus_allowed;
 #endif /* CONFIG_MIPS_MT_FPAFF */
 
 	if (clone_flags & CLONE_SETTLS)
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 35234b9..054861c 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -46,7 +46,8 @@
  */
 void ptrace_disable(struct task_struct *child)
 {
-	/* Nothing to do.. */
+	/* Don't load the watchpoint registers for the ex-child. */
+	clear_tsk_thread_flag(child, TIF_LOAD_WATCH);
 }
 
 /*
@@ -167,6 +168,93 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data)
 	return 0;
 }
 
+int ptrace_get_watch_regs(struct task_struct *child,
+			  struct pt_watch_regs __user *addr)
+{
+	enum pt_watch_style style;
+	int i;
+
+	if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0)
+		return -EIO;
+	if (!access_ok(VERIFY_WRITE, addr, sizeof(struct pt_watch_regs)))
+		return -EIO;
+
+#ifdef CONFIG_32BIT
+	style = pt_watch_style_mips32;
+#define WATCH_STYLE mips32
+#else
+	style = pt_watch_style_mips64;
+#define WATCH_STYLE mips64
+#endif
+
+	__put_user(style, &addr->style);
+	__put_user(current_cpu_data.watch_reg_use_cnt,
+		   &addr->WATCH_STYLE.num_valid);
+	for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) {
+		__put_user(child->thread.watch.mips3264.watchlo[i],
+			   &addr->WATCH_STYLE.watchlo[i]);
+		__put_user(child->thread.watch.mips3264.watchhi[i] & 0xfff,
+			   &addr->WATCH_STYLE.watchhi[i]);
+		__put_user(current_cpu_data.watch_reg_masks[i],
+			   &addr->WATCH_STYLE.watch_masks[i]);
+	}
+	for (; i < 8; i++) {
+		__put_user(0, &addr->WATCH_STYLE.watchlo[i]);
+		__put_user(0, &addr->WATCH_STYLE.watchhi[i]);
+		__put_user(0, &addr->WATCH_STYLE.watch_masks[i]);
+	}
+
+	return 0;
+}
+
+int ptrace_set_watch_regs(struct task_struct *child,
+			  struct pt_watch_regs __user *addr)
+{
+	int i;
+	int watch_active = 0;
+	unsigned long lt[NUM_WATCH_REGS];
+	u16 ht[NUM_WATCH_REGS];
+
+	if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0)
+		return -EIO;
+	if (!access_ok(VERIFY_READ, addr, sizeof(struct pt_watch_regs)))
+		return -EIO;
+	/* Check the values. */
+	for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) {
+		__get_user(lt[i], &addr->WATCH_STYLE.watchlo[i]);
+#ifdef CONFIG_32BIT
+		if (lt[i] & __UA_LIMIT)
+			return -EINVAL;
+#else
+		if (test_tsk_thread_flag(child, TIF_32BIT_ADDR)) {
+			if (lt[i] & 0xffffffff80000000UL)
+				return -EINVAL;
+		} else {
+			if (lt[i] & __UA_LIMIT)
+				return -EINVAL;
+		}
+#endif
+		__get_user(ht[i], &addr->WATCH_STYLE.watchhi[i]);
+		if (ht[i] & ~0xff8)
+			return -EINVAL;
+	}
+	/* Install them. */
+	for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) {
+		if (lt[i] & 7)
+			watch_active = 1;
+		child->thread.watch.mips3264.watchlo[i] = lt[i];
+		/* Set the G bit. */
+		child->thread.watch.mips3264.watchhi[i] = ht[i];
+	}
+
+	if (watch_active)
+		set_tsk_thread_flag(child, TIF_LOAD_WATCH);
+	else
+		clear_tsk_thread_flag(child, TIF_LOAD_WATCH);
+
+	return 0;
+}
+
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
@@ -238,7 +326,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		case FPC_EIR: {	/* implementation / version register */
 			unsigned int flags;
 #ifdef CONFIG_MIPS_MT_SMTC
-			unsigned int irqflags;
+			unsigned long irqflags;
 			unsigned int mtflags;
 #endif /* CONFIG_MIPS_MT_SMTC */
 
@@ -440,6 +528,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				(unsigned long __user *) data);
 		break;
 
+	case PTRACE_GET_WATCH_REGS:
+		ret = ptrace_get_watch_regs(child,
+					(struct pt_watch_regs __user *) addr);
+		break;
+
+	case PTRACE_SET_WATCH_REGS:
+		ret = ptrace_set_watch_regs(child,
+					(struct pt_watch_regs __user *) addr);
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index 76818be..1ca3410 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -15,6 +15,7 @@
  * binaries.
  */
 #include <linux/compiler.h>
+#include <linux/compat.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -36,47 +37,17 @@
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
 
-int ptrace_getregs(struct task_struct *child, __s64 __user *data);
-int ptrace_setregs(struct task_struct *child, __s64 __user *data);
-
-int ptrace_getfpregs(struct task_struct *child, __u32 __user *data);
-int ptrace_setfpregs(struct task_struct *child, __u32 __user *data);
-
 /*
  * Tracing a 32-bit process with a 64-bit strace and vice versa will not
  * work.  I don't know how to fix this.
  */
-asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+			compat_ulong_t caddr, compat_ulong_t cdata)
 {
-	struct task_struct *child;
+	int addr = caddr;
+	int data = cdata;
 	int ret;
 
-#if 0
-	printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n",
-	       (int) request, (int) pid, (unsigned long) addr,
-	       (unsigned long) data);
-#endif
-	lock_kernel();
-	if (request == PTRACE_TRACEME) {
-		ret = ptrace_traceme();
-		goto out;
-	}
-
-	child = ptrace_get_task_struct(pid);
-	if (IS_ERR(child)) {
-		ret = PTR_ERR(child);
-		goto out;
-	}
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 	/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -214,7 +185,7 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 			if (!cpu_has_dsp) {
 				tmp = 0;
 				ret = -EIO;
-				goto out_tsk;
+				goto out;
 			}
 			dregs = __get_dsp_regs(child);
 			tmp = (unsigned long) (dregs[addr - DSP_BASE]);
@@ -224,14 +195,14 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 			if (!cpu_has_dsp) {
 				tmp = 0;
 				ret = -EIO;
-				goto out_tsk;
+				goto out;
 			}
 			tmp = child->thread.dsp.dspcontrol;
 			break;
 		default:
 			tmp = 0;
 			ret = -EIO;
-			goto out_tsk;
+			goto out;
 		}
 		ret = put_user(tmp, (unsigned __user *) (unsigned long) data);
 		break;
@@ -410,14 +381,20 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 				(unsigned long __user *) (unsigned long) data);
 		break;
 
+	case PTRACE_GET_WATCH_REGS:
+		ret = ptrace_get_watch_regs(child,
+			(struct pt_watch_regs __user *) (unsigned long) addr);
+		break;
+
+	case PTRACE_SET_WATCH_REGS:
+		ret = ptrace_set_watch_regs(child,
+			(struct pt_watch_regs __user *) (unsigned long) addr);
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
-
-out_tsk:
-	put_task_struct(child);
 out:
-	unlock_kernel();
 	return ret;
 }
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index dfd868b..4ce93aa 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -522,8 +522,8 @@ static int __init rtlx_module_init(void)
 		atomic_set(&channel_wqs[i].in_open, 0);
 		mutex_init(&channel_wqs[i].mutex);
 
-		dev = device_create_drvdata(mt_class, NULL, MKDEV(major, i),
-					    NULL, "%s%d", module_name, i);
+		dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
+				    "%s%d", module_name, i);
 		if (IS_ERR(dev)) {
 			err = PTR_ERR(dev);
 			goto out_chrdev;
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index da7f1b6..e266b3a 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -214,12 +214,12 @@ EXPORT(sysn32_call_table)
 	PTR	sys_fchown
 	PTR	sys_lchown
 	PTR	sys_umask
-	PTR	sys32_gettimeofday
+	PTR	compat_sys_gettimeofday
 	PTR	compat_sys_getrlimit		/* 6095 */
 	PTR	compat_sys_getrusage
 	PTR	compat_sys_sysinfo
 	PTR	compat_sys_times
-	PTR	sys32_ptrace
+	PTR	compat_sys_ptrace
 	PTR	sys_getuid			/* 6100 */
 	PTR	sys_syslog
 	PTR	sys_getgid
@@ -279,7 +279,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_chroot
 	PTR	sys_sync
 	PTR	sys_acct
-	PTR	sys32_settimeofday
+	PTR	compat_sys_settimeofday
 	PTR	compat_sys_mount		/* 6160 */
 	PTR	sys_umount
 	PTR	sys_swapon
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index d7cd1aa..6c7ef83 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -231,7 +231,7 @@ sys_call_table:
 	PTR	sys_setuid
 	PTR	sys_getuid
 	PTR	compat_sys_stime		/* 4025 */
-	PTR	sys32_ptrace
+	PTR	compat_sys_ptrace
 	PTR	sys_alarm
 	PTR	sys_ni_syscall			/* was sys_fstat */
 	PTR	sys_pause
@@ -283,8 +283,8 @@ sys_call_table:
 	PTR	compat_sys_setrlimit		/* 4075 */
 	PTR	compat_sys_getrlimit
 	PTR	compat_sys_getrusage
-	PTR	sys32_gettimeofday
-	PTR	sys32_settimeofday
+	PTR	compat_sys_gettimeofday
+	PTR	compat_sys_settimeofday
 	PTR	sys_getgroups			/* 4080 */
 	PTR	sys_setgroups
 	PTR	sys_ni_syscall			/* old_select */
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 572c610..652709b 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -482,6 +482,18 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 	return err;
 }
 
+int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
+{
+	memset(to, 0, sizeof *to);
+
+	if (copy_from_user(to, from, 3*sizeof(int)) ||
+	    copy_from_user(to->_sifields._pad,
+			   from->_sifields._pad, SI_PAD_SIZE32))
+		return -EFAULT;
+
+	return 0;
+}
+
 asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
 {
 	struct sigframe32 __user *frame;
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 4410f17..7b59cfb 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -121,6 +121,8 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu = smp_processor_id();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
+	notify_cpu_starting(cpu);
+
 	mp_ops->smp_finish();
 	set_cpu_sibling_map(cpu);
 
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index a516286..897fb2b 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1,4 +1,21 @@
-/* Copyright (C) 2004 Mips Technologies, Inc */
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * Copyright (C) 2004 Mips Technologies, Inc
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
 
 #include <linux/clockchips.h>
 #include <linux/kernel.h>
@@ -21,7 +38,6 @@
 #include <asm/time.h>
 #include <asm/addrspace.h>
 #include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
 #include <asm/smtc_proc.h>
 
 /*
@@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS];
 
 asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
 
-/*
- * Clock interrupt "latch" buffers, per "CPU"
- */
-
-static atomic_t ipi_timer_latch[NR_CPUS];
 
 /*
  * Number of InterProcessor Interrupt (IPI) message buffers to allocate
@@ -70,7 +81,7 @@ static atomic_t ipi_timer_latch[NR_CPUS];
 
 #define IPIBUF_PER_CPU 4
 
-static struct smtc_ipi_q IPIQ[NR_CPUS];
+struct smtc_ipi_q IPIQ[NR_CPUS];
 static struct smtc_ipi_q freeIPIq;
 
 
@@ -282,7 +293,7 @@ static void smtc_configure_tlb(void)
  * phys_cpu_present_map and the logical/physical mappings.
  */
 
-int __init mipsmt_build_cpu_map(int start_cpu_slot)
+int __init smtc_build_cpu_map(int start_cpu_slot)
 {
 	int i, ntcs;
 
@@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 	write_tc_c0_tcstatus((read_tc_c0_tcstatus()
 			& ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
 			| TCSTATUS_A);
-	write_tc_c0_tccontext(0);
+	/*
+	 * TCContext gets an offset from the base of the IPIQ array
+	 * to be used in low-level code to detect the presence of
+	 * an active IPI queue
+	 */
+	write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
 	/* Bind tc to vpe */
 	write_tc_c0_tcbind(vpe);
 	/* In general, all TCs should have the same cpu_data indications */
@@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 		cpu_data[cpu].options &= ~MIPS_CPU_FPU;
 	cpu_data[cpu].vpe_id = vpe;
 	cpu_data[cpu].tc_id = tc;
+	/* Multi-core SMTC hasn't been tested, but be prepared */
+	cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
 }
 
+/*
+ * Tweak to get Count registes in as close a sync as possible.
+ * Value seems good for 34K-class cores.
+ */
+
+#define CP0_SKEW 8
 
-void mipsmt_prepare_cpus(void)
+void smtc_prepare_cpus(int cpus)
 {
 	int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
 	unsigned long flags;
@@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void)
 		IPIQ[i].head = IPIQ[i].tail = NULL;
 		spin_lock_init(&IPIQ[i].lock);
 		IPIQ[i].depth = 0;
-		atomic_set(&ipi_timer_latch[i], 0);
 	}
 
 	/* cpu_data index starts at zero */
 	cpu = 0;
 	cpu_data[cpu].vpe_id = 0;
 	cpu_data[cpu].tc_id = 0;
+	cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff;
 	cpu++;
 
 	/* Report on boot-time options */
@@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void)
 			write_vpe_c0_compare(0);
 			/* Propagate Config7 */
 			write_vpe_c0_config7(read_c0_config7());
-			write_vpe_c0_count(read_c0_count());
+			write_vpe_c0_count(read_c0_count() + CP0_SKEW);
+			ehb();
 		}
 		/* enable multi-threading within VPE */
 		write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
@@ -556,7 +581,7 @@ void mipsmt_prepare_cpus(void)
 void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 {
 	extern u32 kernelsp[NR_CPUS];
-	long flags;
+	unsigned long flags;
 	int mtflags;
 
 	LOCK_MT_PRA();
@@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 
 void smtc_init_secondary(void)
 {
-	/*
-	 * Start timer on secondary VPEs if necessary.
-	 * plat_timer_setup has already have been invoked by init/main
-	 * on "boot" TC.  Like per_cpu_trap_init() hack, this assumes that
-	 * SMTC init code assigns TCs consdecutively and in ascending order
-	 * to across available VPEs.
-	 */
-	if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
-	    ((read_c0_tcbind() & TCBIND_CURVPE)
-	    != cpu_data[smp_processor_id() - 1].vpe_id)){
-		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
-	}
-
 	local_irq_enable();
 }
 
 void smtc_smp_finish(void)
 {
+	int cpu = smp_processor_id();
+
+	/*
+	 * Lowest-numbered CPU per VPE starts a clock tick.
+	 * Like per_cpu_trap_init() hack, this assumes that
+	 * SMTC init code assigns TCs consdecutively and
+	 * in ascending order across available VPEs.
+	 */
+	if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
+		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+
 	printk("TC %d going on-line as CPU %d\n",
 		cpu_data[smp_processor_id()].tc_id, smp_processor_id());
 }
@@ -753,8 +776,10 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 {
 	int tcstatus;
 	struct smtc_ipi *pipi;
-	long flags;
+	unsigned long flags;
 	int mtflags;
+	unsigned long tcrestart;
+	extern void r4k_wait_irqoff(void), __pastwait(void);
 
 	if (cpu == smp_processor_id()) {
 		printk("Cannot Send IPI to self!\n");
@@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 	pipi->arg = (void *)action;
 	pipi->dest = cpu;
 	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
-		if (type == SMTC_CLOCK_TICK)
-			atomic_inc(&ipi_timer_latch[cpu]);
 		/* If not on same VPE, enqueue and send cross-VPE interrupt */
 		smtc_ipi_nq(&IPIQ[cpu], pipi);
 		LOCK_CORE_PRA();
@@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 
 		if ((tcstatus & TCSTATUS_IXMT) != 0) {
 			/*
-			 * Spin-waiting here can deadlock,
-			 * so we queue the message for the target TC.
+			 * If we're in the the irq-off version of the wait
+			 * loop, we need to force exit from the wait and
+			 * do a direct post of the IPI.
+			 */
+			if (cpu_wait == r4k_wait_irqoff) {
+				tcrestart = read_tc_c0_tcrestart();
+				if (tcrestart >= (unsigned long)r4k_wait_irqoff
+				    && tcrestart < (unsigned long)__pastwait) {
+					write_tc_c0_tcrestart(__pastwait);
+					tcstatus &= ~TCSTATUS_IXMT;
+					write_tc_c0_tcstatus(tcstatus);
+					goto postdirect;
+				}
+			}
+			/*
+			 * Otherwise we queue the message for the target TC
+			 * to pick up when he does a local_irq_restore()
 			 */
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
-			/* Try to reduce redundant timer interrupt messages */
-			if (type == SMTC_CLOCK_TICK) {
-			    if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){
-				smtc_ipi_nq(&freeIPIq, pipi);
-				return;
-			    }
-			}
 			smtc_ipi_nq(&IPIQ[cpu], pipi);
 		} else {
-			if (type == SMTC_CLOCK_TICK)
-				atomic_inc(&ipi_timer_latch[cpu]);
+postdirect:
 			post_direct_ipi(cpu, pipi);
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
@@ -883,7 +913,7 @@ static void ipi_call_interrupt(void)
 	smp_call_function_interrupt();
 }
 
-DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
 
 void ipi_decode(struct smtc_ipi *pipi)
 {
@@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi)
 	struct clock_event_device *cd;
 	void *arg_copy = pipi->arg;
 	int type_copy = pipi->type;
-	int ticks;
-
 	smtc_ipi_nq(&freeIPIq, pipi);
 	switch (type_copy) {
 	case SMTC_CLOCK_TICK:
 		irq_enter();
 		kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++;
-		cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-		ticks = atomic_read(&ipi_timer_latch[cpu]);
-		atomic_sub(ticks, &ipi_timer_latch[cpu]);
-		while (ticks) {
-			cd->event_handler(cd);
-			ticks--;
-		}
+		cd = &per_cpu(mips_clockevent_device, cpu);
+		cd->event_handler(cd);
 		irq_exit();
 		break;
 
@@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi)
 	}
 }
 
+/*
+ * Similar to smtc_ipi_replay(), but invoked from context restore,
+ * so it reuses the current exception frame rather than set up a
+ * new one with self_ipi.
+ */
+
 void deferred_smtc_ipi(void)
 {
-	struct smtc_ipi *pipi;
-	unsigned long flags;
-/* DEBUG */
-	int q = smp_processor_id();
+	int cpu = smp_processor_id();
 
 	/*
 	 * Test is not atomic, but much faster than a dequeue,
 	 * and the vast majority of invocations will have a null queue.
+	 * If irq_disabled when this was called, then any IPIs queued
+	 * after we test last will be taken on the next irq_enable/restore.
+	 * If interrupts were enabled, then any IPIs added after the
+	 * last test will be taken directly.
 	 */
-	if (IPIQ[q].head != NULL) {
-		while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
-			/* ipi_decode() should be called with interrupts off */
-			local_irq_save(flags);
+
+	while (IPIQ[cpu].head != NULL) {
+		struct smtc_ipi_q *q = &IPIQ[cpu];
+		struct smtc_ipi *pipi;
+		unsigned long flags;
+
+		/*
+		 * It may be possible we'll come in with interrupts
+		 * already enabled.
+		 */
+		local_irq_save(flags);
+
+		spin_lock(&q->lock);
+		pipi = __smtc_ipi_dq(q);
+		spin_unlock(&q->lock);
+		if (pipi != NULL)
 			ipi_decode(pipi);
-			local_irq_restore(flags);
-		}
+		/*
+		 * The use of the __raw_local restore isn't
+		 * as obviously necessary here as in smtc_ipi_replay(),
+		 * but it's more efficient, given that we're already
+		 * running down the IPI queue.
+		 */
+		__raw_local_irq_restore(flags);
 	}
 }
 
@@ -975,7 +1022,7 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm)
 	struct smtc_ipi *pipi;
 	unsigned long tcstatus;
 	int sent;
-	long flags;
+	unsigned long flags;
 	unsigned int mtflags;
 	unsigned int vpflags;
 
@@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe)
 
 /*
  * SMTC-specific hacks invoked from elsewhere in the kernel.
- *
- * smtc_ipi_replay is called from raw_local_irq_restore which is only ever
- * called with interrupts disabled.  We do rely on interrupts being disabled
- * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would
- * result in a recursive call to raw_local_irq_restore().
  */
 
-static void __smtc_ipi_replay(void)
+ /*
+  * smtc_ipi_replay is called from raw_local_irq_restore
+  */
+
+void smtc_ipi_replay(void)
 {
 	unsigned int cpu = smp_processor_id();
 
 	/*
 	 * To the extent that we've ever turned interrupts off,
 	 * we may have accumulated deferred IPIs.  This is subtle.
-	 * If we use the smtc_ipi_qdepth() macro, we'll get an
-	 * exact number - but we'll also disable interrupts
-	 * and create a window of failure where a new IPI gets
-	 * queued after we test the depth but before we re-enable
-	 * interrupts. So long as IXMT never gets set, however,
 	 * we should be OK:  If we pick up something and dispatch
 	 * it here, that's great. If we see nothing, but concurrent
 	 * with this operation, another TC sends us an IPI, IXMT
 	 * is clear, and we'll handle it as a real pseudo-interrupt
-	 * and not a pseudo-pseudo interrupt.
+	 * and not a pseudo-pseudo interrupt.  The important thing
+	 * is to do the last check for queued message *after* the
+	 * re-enabling of interrupts.
 	 */
-	if (IPIQ[cpu].depth > 0) {
-		while (1) {
-			struct smtc_ipi_q *q = &IPIQ[cpu];
-			struct smtc_ipi *pipi;
-			extern void self_ipi(struct smtc_ipi *);
-
-			spin_lock(&q->lock);
-			pipi = __smtc_ipi_dq(q);
-			spin_unlock(&q->lock);
-			if (!pipi)
-				break;
+	while (IPIQ[cpu].head != NULL) {
+		struct smtc_ipi_q *q = &IPIQ[cpu];
+		struct smtc_ipi *pipi;
+		unsigned long flags;
+
+		/*
+		 * It's just possible we'll come in with interrupts
+		 * already enabled.
+		 */
+		local_irq_save(flags);
+
+		spin_lock(&q->lock);
+		pipi = __smtc_ipi_dq(q);
+		spin_unlock(&q->lock);
+		/*
+		 ** But use a raw restore here to avoid recursion.
+		 */
+		__raw_local_irq_restore(flags);
 
+		if (pipi) {
 			self_ipi(pipi);
 			smtc_cpu_stats[cpu].selfipis++;
 		}
 	}
 }
 
-void smtc_ipi_replay(void)
-{
-	raw_local_irq_disable();
-	__smtc_ipi_replay();
-}
-
 EXPORT_SYMBOL(smtc_ipi_replay);
 
 void smtc_idle_loop_hook(void)
@@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void)
 		}
 	}
 
-	/*
-	 * Now that we limit outstanding timer IPIs, check for hung TC
-	 */
-	for (tc = 0; tc < NR_CPUS; tc++) {
-		/* Don't check ourself - we'll dequeue IPIs just below */
-		if ((tc != smp_processor_id()) &&
-		    atomic_read(&ipi_timer_latch[tc]) > timerq_limit) {
-		    if (clock_hang_reported[tc] == 0) {
-			pdb_msg += sprintf(pdb_msg,
-				"TC %d looks hung with timer latch at %d\n",
-				tc, atomic_read(&ipi_timer_latch[tc]));
-			clock_hang_reported[tc]++;
-			}
-		}
-	}
 	emt(mtflags);
 	local_irq_restore(flags);
 	if (pdb_msg != &id_ho_db_msg[0])
 		printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
 #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 
-	/*
-	 * Replay any accumulated deferred IPIs. If "Instant Replay"
-	 * is in use, there should never be any.
-	 */
-#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
-	{
-		unsigned long flags;
-
-		local_irq_save(flags);
-		__smtc_ipi_replay();
-		local_irq_restore(flags);
-	}
-#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
+	smtc_ipi_replay();
 }
 
 void smtc_soft_dump(void)
@@ -1242,10 +1260,6 @@ void smtc_soft_dump(void)
 		printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
 	}
 	smtc_ipi_qdump();
-	printk("Timer IPI Backlogs:\n");
-	for (i=0; i < NR_CPUS; i++) {
-		printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i]));
-	}
 	printk("%d Recoveries of \"stolen\" FPU\n",
 	       atomic_read(&smtc_fpu_recoveries));
 }
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 343015a..37970d9 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -7,7 +7,6 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 2001 MIPS Technologies, Inc.
  */
-#include <linux/a.out.h>
 #include <linux/capability.h>
 #include <linux/errno.h>
 #include <linux/linkage.h>
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 5fd0cd0..80b9e07 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -42,6 +42,7 @@
 #include <asm/tlbdebug.h>
 #include <asm/traps.h>
 #include <asm/uaccess.h>
+#include <asm/watch.h>
 #include <asm/mmu_context.h>
 #include <asm/types.h>
 #include <asm/stacktrace.h>
@@ -825,8 +826,10 @@ static void mt_ase_fp_affinity(void)
 		if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) {
 			cpumask_t tmask;
 
-			cpus_and(tmask, current->thread.user_cpus_allowed,
-			         mt_fpu_cpumask);
+			current->thread.user_cpus_allowed
+				= current->cpus_allowed;
+			cpus_and(tmask, current->cpus_allowed,
+				mt_fpu_cpumask);
 			set_cpus_allowed(current, tmask);
 			set_thread_flag(TIF_FPUBOUND);
 		}
@@ -910,13 +913,26 @@ asmlinkage void do_mdmx(struct pt_regs *regs)
 
 asmlinkage void do_watch(struct pt_regs *regs)
 {
+	u32 cause;
+
 	/*
-	 * We use the watch exception where available to detect stack
-	 * overflows.
+	 * Clear WP (bit 22) bit of cause register so we don't loop
+	 * forever.
 	 */
-	dump_tlb_all();
-	show_regs(regs);
-	panic("Caught WATCH exception - probably caused by stack overflow.");
+	cause = read_c0_cause();
+	cause &= ~(1 << 22);
+	write_c0_cause(cause);
+
+	/*
+	 * If the current thread has the watch registers loaded, save
+	 * their values and send SIGTRAP.  Otherwise another thread
+	 * left the registers set, clear them and continue.
+	 */
+	if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) {
+		mips_read_watch_registers();
+		force_sig(SIGTRAP, current);
+	} else
+		mips_clear_watch_registers();
 }
 
 asmlinkage void do_mcheck(struct pt_regs *regs)
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index afb119f..58738c8 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -104,7 +104,7 @@ SECTIONS
 	. = ALIGN(_PAGE_SIZE);
 	__nosave_end = .;
 
-	. = ALIGN(32);
+	. = ALIGN(1 << CONFIG_MIPS_L1_CACHE_SHIFT);
 	.data.cacheline_aligned : {
 		*(.data.cacheline_aligned)
 	}
diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c
new file mode 100644
index 0000000..c154069
--- /dev/null
+++ b/arch/mips/kernel/watch.c
@@ -0,0 +1,188 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 David Daney
+ */
+
+#include <linux/sched.h>
+
+#include <asm/processor.h>
+#include <asm/watch.h>
+
+/*
+ * Install the watch registers for the current thread.  A maximum of
+ * four registers are installed although the machine may have more.
+ */
+void mips_install_watch_registers(void)
+{
+	struct mips3264_watch_reg_state *watches =
+		&current->thread.watch.mips3264;
+	switch (current_cpu_data.watch_reg_use_cnt) {
+	default:
+		BUG();
+	case 4:
+		write_c0_watchlo3(watches->watchlo[3]);
+		/* Write 1 to the I, R, and W bits to clear them, and
+		   1 to G so all ASIDs are trapped. */
+		write_c0_watchhi3(0x40000007 | watches->watchhi[3]);
+	case 3:
+		write_c0_watchlo2(watches->watchlo[2]);
+		write_c0_watchhi2(0x40000007 | watches->watchhi[2]);
+	case 2:
+		write_c0_watchlo1(watches->watchlo[1]);
+		write_c0_watchhi1(0x40000007 | watches->watchhi[1]);
+	case 1:
+		write_c0_watchlo0(watches->watchlo[0]);
+		write_c0_watchhi0(0x40000007 | watches->watchhi[0]);
+	}
+}
+
+/*
+ * Read back the watchhi registers so the user space debugger has
+ * access to the I, R, and W bits.  A maximum of four registers are
+ * read although the machine may have more.
+ */
+void mips_read_watch_registers(void)
+{
+	struct mips3264_watch_reg_state *watches =
+		&current->thread.watch.mips3264;
+	switch (current_cpu_data.watch_reg_use_cnt) {
+	default:
+		BUG();
+	case 4:
+		watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff);
+	case 3:
+		watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff);
+	case 2:
+		watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff);
+	case 1:
+		watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff);
+	}
+	if (current_cpu_data.watch_reg_use_cnt == 1 &&
+	    (watches->watchhi[0] & 7) == 0) {
+		/* Pathological case of release 1 architecture that
+		 * doesn't set the condition bits.  We assume that
+		 * since we got here, the watch condition was met and
+		 * signal that the conditions requested in watchlo
+		 * were met.  */
+		watches->watchhi[0] |= (watches->watchlo[0] & 7);
+	}
+ }
+
+/*
+ * Disable all watch registers.  Although only four registers are
+ * installed, all are cleared to eliminate the possibility of endless
+ * looping in the watch handler.
+ */
+void mips_clear_watch_registers(void)
+{
+	switch (current_cpu_data.watch_reg_count) {
+	default:
+		BUG();
+	case 8:
+		write_c0_watchlo7(0);
+	case 7:
+		write_c0_watchlo6(0);
+	case 6:
+		write_c0_watchlo5(0);
+	case 5:
+		write_c0_watchlo4(0);
+	case 4:
+		write_c0_watchlo3(0);
+	case 3:
+		write_c0_watchlo2(0);
+	case 2:
+		write_c0_watchlo1(0);
+	case 1:
+		write_c0_watchlo0(0);
+	}
+}
+
+__cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
+{
+	unsigned int t;
+
+	if ((c->options & MIPS_CPU_WATCH) == 0)
+		return;
+	/*
+	 * Check which of the I,R and W bits are supported, then
+	 * disable the register.
+	 */
+	write_c0_watchlo0(7);
+	t = read_c0_watchlo0();
+	write_c0_watchlo0(0);
+	c->watch_reg_masks[0] = t & 7;
+
+	/* Write the mask bits and read them back to determine which
+	 * can be used. */
+	c->watch_reg_count = 1;
+	c->watch_reg_use_cnt = 1;
+	t = read_c0_watchhi0();
+	write_c0_watchhi0(t | 0xff8);
+	t = read_c0_watchhi0();
+	c->watch_reg_masks[0] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo1(7);
+	t = read_c0_watchlo1();
+	write_c0_watchlo1(0);
+	c->watch_reg_masks[1] = t & 7;
+
+	c->watch_reg_count = 2;
+	c->watch_reg_use_cnt = 2;
+	t = read_c0_watchhi1();
+	write_c0_watchhi1(t | 0xff8);
+	t = read_c0_watchhi1();
+	c->watch_reg_masks[1] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo2(7);
+	t = read_c0_watchlo2();
+	write_c0_watchlo2(0);
+	c->watch_reg_masks[2] = t & 7;
+
+	c->watch_reg_count = 3;
+	c->watch_reg_use_cnt = 3;
+	t = read_c0_watchhi2();
+	write_c0_watchhi2(t | 0xff8);
+	t = read_c0_watchhi2();
+	c->watch_reg_masks[2] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo3(7);
+	t = read_c0_watchlo3();
+	write_c0_watchlo3(0);
+	c->watch_reg_masks[3] = t & 7;
+
+	c->watch_reg_count = 4;
+	c->watch_reg_use_cnt = 4;
+	t = read_c0_watchhi3();
+	write_c0_watchhi3(t | 0xff8);
+	t = read_c0_watchhi3();
+	c->watch_reg_masks[3] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	/* We use at most 4, but probe and report up to 8. */
+	c->watch_reg_count = 5;
+	t = read_c0_watchhi4();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 6;
+	t = read_c0_watchhi5();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 7;
+	t = read_c0_watchhi6();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 8;
+}
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index 866881e..8f88886 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -38,14 +38,13 @@
 #endif
 
 /* Strategy function to write EEPROM after changing string entry */
-int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
+int sysctl_lasatstring(ctl_table *table,
 		void *oldval, size_t *oldlenp,
 		void *newval, size_t newlen)
 {
 	int r;
 
-	r = sysctl_string(table, name,
-			  nlen, oldval, oldlenp, newval, newlen);
+	r = sysctl_string(table, oldval, oldlenp, newval, newlen);
 	if (r < 0)
 		return r;
 
@@ -113,13 +112,13 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
 #endif
 
 /* Sysctl for setting the IP addresses */
-int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen,
+int sysctl_lasat_intvec(ctl_table *table,
 		    void *oldval, size_t *oldlenp,
 		    void *newval, size_t newlen)
 {
 	int r;
 
-	r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
+	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
 	if (r < 0)
 		return r;
 
@@ -131,7 +130,7 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen,
 
 #ifdef CONFIG_DS1603
 /* Same for RTC */
-int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
+int sysctl_lasat_rtc(ctl_table *table,
 		    void *oldval, size_t *oldlenp,
 		    void *newval, size_t newlen)
 {
@@ -140,7 +139,7 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
 	rtctmp = read_persistent_clock();
 	if (rtctmp < 0)
 		rtctmp = 0;
-	r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
+	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
 	if (r < 0)
 		return r;
 	if (newval && newlen)
@@ -211,13 +210,13 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
 }
 #endif
 
-static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen,
+static int sysctl_lasat_prid(ctl_table *table,
 				     void *oldval, size_t *oldlenp,
 				     void *newval, size_t newlen)
 {
 	int r;
 
-	r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
+	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
 	if (r < 0)
 		return r;
 	if (newval && newlen) {
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index edac989..6b876ca 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -55,20 +55,14 @@
 #define UNIT(unit)  ((unit)*NBYTES)
 
 #define ADDC(sum,reg)						\
-	.set	push;						\
-	.set	noat;						\
 	ADD	sum, reg;					\
 	sltu	v1, sum, reg;					\
 	ADD	sum, v1;					\
-	.set	pop
 
 #define ADDC32(sum,reg)						\
-	.set	push;						\
-	.set	noat;						\
 	addu	sum, reg;					\
 	sltu	v1, sum, reg;					\
 	addu	sum, v1;					\
-	.set	pop
 
 #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3)	\
 	LOAD	_t0, (offset + UNIT(0))(src);			\
@@ -267,8 +261,6 @@ LEAF(csum_partial)
 1:	ADDC(sum, t1)
 
 	/* fold checksum */
-	.set	push
-	.set	noat
 #ifdef USE_DOUBLE
 	dsll32	v1, sum, 0
 	daddu	sum, v1
@@ -276,21 +268,22 @@ LEAF(csum_partial)
 	dsra32	sum, sum, 0
 	addu	sum, v1
 #endif
-	sll	v1, sum, 16
-	addu	sum, v1
-	sltu	v1, sum, v1
-	srl	sum, sum, 16
-	addu	sum, v1
 
 	/* odd buffer alignment? */
-	beqz	t7, 1f
-	 nop
-	sll	v1, sum, 8
+#ifdef CPU_MIPSR2
+	wsbh	v1, sum
+	movn	sum, v1, t7
+#else
+	beqz	t7, 1f			/* odd buffer alignment? */
+	 lui	v1, 0x00ff
+	addu	v1, 0x00ff
+	and	t0, sum, v1
+	sll	t0, t0, 8
 	srl	sum, sum, 8
-	or	sum, v1
-	andi	sum, 0xffff
-	.set	pop
+	and	sum, sum, v1
+	or	sum, sum, t0
 1:
+#endif
 	.set	reorder
 	/* Add the passed partial csum.  */
 	ADDC32(sum, a2)
@@ -669,8 +662,6 @@ EXC(	sb	t0, NBYTES-2(dst), .Ls_exc)
 	ADDC(sum, t2)
 .Ldone:
 	/* fold checksum */
-	.set	push
-	.set	noat
 #ifdef USE_DOUBLE
 	dsll32	v1, sum, 0
 	daddu	sum, v1
@@ -678,21 +669,21 @@ EXC(	sb	t0, NBYTES-2(dst), .Ls_exc)
 	dsra32	sum, sum, 0
 	addu	sum, v1
 #endif
-	sll	v1, sum, 16
-	addu	sum, v1
-	sltu	v1, sum, v1
-	srl	sum, sum, 16
-	addu	sum, v1
 
-	/* odd buffer alignment? */
-	beqz	odd, 1f
-	 nop
-	sll	v1, sum, 8
+#ifdef CPU_MIPSR2
+	wsbh	v1, sum
+	movn	sum, v1, odd
+#else
+	beqz	odd, 1f			/* odd buffer alignment? */
+	 lui	v1, 0x00ff
+	addu	v1, 0x00ff
+	and	t0, sum, v1
+	sll	t0, t0, 8
 	srl	sum, sum, 8
-	or	sum, v1
-	andi	sum, 0xffff
-	.set	pop
+	and	sum, sum, v1
+	or	sum, sum, t0
 1:
+#endif
 	.set reorder
 	ADDC32(sum, psum)
 	jr	ra
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index 3b7dd72..cef2db8 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -15,6 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
 obj-$(CONFIG_PCI)		+= malta-pci.o
 
 # FIXME FIXME FIXME
-obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o
+obj-$(CONFIG_MIPS_MT_SMTC)	+= malta-smtc.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c
index 5ea705e..f84a46a 100644
--- a/arch/mips/mti-malta/malta-smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
@@ -84,12 +84,17 @@ static void msmtc_cpus_done(void)
 
 static void __init msmtc_smp_setup(void)
 {
-	mipsmt_build_cpu_map(0);
+	/*
+	 * we won't get the definitive value until
+	 * we've run smtc_prepare_cpus later, but
+	 * we would appear to need an upper bound now.
+	 */
+	smp_num_siblings = smtc_build_cpu_map(0);
 }
 
 static void __init msmtc_prepare_cpus(unsigned int max_cpus)
 {
-	mipsmt_prepare_cpus();
+	smtc_prepare_cpus(max_cpus);
 }
 
 struct plat_smp_ops msmtc_smp_ops = {
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index dd2fbd6..3bf3354 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -32,7 +32,7 @@ static int op_mips_setup(void)
         return 0;
 }
 
-static int op_mips_create_files(struct super_block * sb, struct dentry * root)
+static int op_mips_create_files(struct super_block *sb, struct dentry *root)
 {
 	int i;
 
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
index 2bfc17c..f04b54f 100644
--- a/arch/mips/oprofile/op_impl.h
+++ b/arch/mips/oprofile/op_impl.h
@@ -27,7 +27,7 @@ struct op_counter_config {
 /* Per-architecture configury and hooks.  */
 struct op_mips_model {
 	void (*reg_setup) (struct op_counter_config *);
-	void (*cpu_setup) (void * dummy);
+	void (*cpu_setup) (void *dummy);
 	int (*init)(void);
 	void (*exit)(void);
 	void (*cpu_start)(void *args);
diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c
index a45d320..3aa8138 100644
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@@ -80,7 +80,7 @@ static void rm9000_cpu_stop(void *args)
 	write_c0_perfcontrol(0);
 }
 
-static irqreturn_t rm9000_perfcount_handler(int irq, void * dev_id)
+static irqreturn_t rm9000_perfcount_handler(int irq, void *dev_id)
 {
 	unsigned int control = read_c0_perfcontrol();
 	struct pt_regs *regs = get_irq_regs();
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 15e01ae..b188624 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SOC_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
 obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
 obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
+obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
@@ -44,6 +45,7 @@ obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
 obj-$(CONFIG_TOSHIBA_JMR3927)	+= fixup-jmr3927.o
 obj-$(CONFIG_SOC_TX4927)	+= pci-tx4927.o
 obj-$(CONFIG_SOC_TX4938)	+= pci-tx4938.o
+obj-$(CONFIG_SOC_TX4939)	+= pci-tx4939.o
 obj-$(CONFIG_TOSHIBA_RBTX4927)	+= fixup-rbtx4927.o
 obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-rbtx4938.o
 obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c
index a270589..846eae9 100644
--- a/arch/mips/pci/fixup-emma2rh.c
+++ b/arch/mips/pci/fixup-emma2rh.c
@@ -29,7 +29,6 @@
 #include <linux/pci.h>
 
 #include <asm/bootinfo.h>
-#include <asm/debug.h>
 
 #include <asm/emma2rh/emma2rh.h>
 
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
index 0e160d9f0..1e6213f 100644
--- a/arch/mips/pci/ops-pnx8550.c
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -29,8 +29,6 @@
 
 #include <asm/mach-pnx8550/pci.h>
 #include <asm/mach-pnx8550/glb.h>
-#include <asm/debug.h>
-
 
 static inline void clear_status(void)
 {
diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c
new file mode 100644
index 0000000..bea9b6c
--- /dev/null
+++ b/arch/mips/pci/pci-bcm47xx.c
@@ -0,0 +1,60 @@
+/*
+ *  Copyright (C) 2008 Aurelien Jarno <aurelien@aurel32.net>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ssb/ssb.h>
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return 0;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	int res;
+	u8 slot, pin;
+
+	res = ssb_pcibios_plat_dev_init(dev);
+	if (res < 0) {
+		printk(KERN_ALERT "PCI: Failed to init device %s\n",
+		       pci_name(dev));
+		return res;
+	}
+
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+	slot = PCI_SLOT(dev->devfn);
+	res = ssb_pcibios_map_irq(dev, slot, pin);
+
+	/* IRQ-0 and IRQ-1 are software interrupts. */
+	if (res < 2) {
+		printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
+		       pci_name(dev));
+		return res;
+	}
+
+	dev->irq = res;
+	return 0;
+}
+
diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c
index d99591a..772e283 100644
--- a/arch/mips/pci/pci-emma2rh.c
+++ b/arch/mips/pci/pci-emma2rh.c
@@ -29,7 +29,6 @@
 #include <linux/pci.h>
 
 #include <asm/bootinfo.h>
-#include <asm/debug.h>
 
 #include <asm/emma2rh/emma2rh.h>
 
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index bd78368..f97ab14 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -143,25 +143,47 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
  */
 int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
+	return 0;
+}
+
+/* Most MIPS systems have straight-forward swizzling needs.  */
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+	return (((pin - 1) + slot) % 4) + 1;
+}
+
+static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
+{
+	while (dev->bus->parent) {
+		/* Move up the chain of bridges. */
+		dev = dev->bus->self;
+	}
+
+	return dev;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
 	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
-	int irq = bc->pci_int[slot];
+	struct pci_dev *rdev = bridge_root_dev(dev);
+	int slot = PCI_SLOT(rdev->devfn);
+	int irq;
 
+	irq = bc->pci_int[slot];
 	if (irq == -1) {
-		irq = bc->pci_int[slot] = request_bridge_irq(bc);
+		irq = request_bridge_irq(bc);
 		if (irq < 0)
-			panic("Can't allocate interrupt for PCI device %s\n",
-			      pci_name(dev));
+			return irq;
+
+		bc->pci_int[slot] = irq;
 	}
 
 	irq_to_bridge[irq] = bc;
 	irq_to_slot[irq] = slot;
 
-	return irq;
-}
+	dev->irq = irq;
 
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
 	return 0;
 }
 
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index 60e2c52..1ea257b 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -114,7 +114,7 @@ int __init tx4938_pciclk66_setup(void)
 	return pciclk;
 }
 
-int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
+int __init tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
 {
 	if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4938_pcic1ptr) {
 		switch (slot) {
diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c
new file mode 100644
index 0000000..5fecf1c
--- /dev/null
+++ b/arch/mips/pci/pci-tx4939.c
@@ -0,0 +1,109 @@
+/*
+ * linux/arch/mips/pci/pci-tx4939.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4939/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4939.h>
+
+int __init tx4939_report_pciclk(void)
+{
+	int pciclk = 0;
+
+	pr_info("PCIC --%s PCICLK:",
+		(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66) ?
+		" PCI66" : "");
+	if (__raw_readq(&tx4939_ccfgptr->pcfg) & TX4939_PCFG_PCICLKEN_ALL) {
+		pciclk = txx9_master_clock * 20 / 6;
+		if (!(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66))
+			pciclk /= 2;
+		printk(KERN_CONT "Internal(%u.%uMHz)",
+		       (pciclk + 50000) / 1000000,
+		       ((pciclk + 50000) / 100000) % 10);
+	} else {
+		printk(KERN_CONT "External");
+		pciclk = -1;
+	}
+	printk(KERN_CONT "\n");
+	return pciclk;
+}
+
+void __init tx4939_report_pci1clk(void)
+{
+	unsigned int pciclk = txx9_master_clock * 20 / 6;
+
+	pr_info("PCIC1 -- PCICLK:%u.%uMHz\n",
+		(pciclk + 50000) / 1000000,
+		((pciclk + 50000) / 100000) % 10);
+}
+
+int __init tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
+{
+	if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4939_pcic1ptr) {
+		switch (slot) {
+		case TX4927_PCIC_IDSEL_AD_TO_SLOT(31):
+			if (__raw_readq(&tx4939_ccfgptr->pcfg) &
+			    TX4939_PCFG_ET0MODE)
+				return TXX9_IRQ_BASE + TX4939_IR_ETH(0);
+			break;
+		case TX4927_PCIC_IDSEL_AD_TO_SLOT(30):
+			if (__raw_readq(&tx4939_ccfgptr->pcfg) &
+			    TX4939_PCFG_ET1MODE)
+				return TXX9_IRQ_BASE + TX4939_IR_ETH(1);
+			break;
+		}
+		return 0;
+	}
+	return -1;
+}
+
+int __init tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq = tx4939_pcic1_map_irq(dev, slot);
+
+	if (irq >= 0)
+		return irq;
+	irq = pin;
+	/* IRQ rotation */
+	irq--;	/* 0-3 */
+	irq = (irq + 33 - slot) % 4;
+	irq++;	/* 1-4 */
+
+	switch (irq) {
+	case 1:
+		irq = TXX9_IRQ_BASE + TX4939_IR_INTA;
+		break;
+	case 2:
+		irq = TXX9_IRQ_BASE + TX4939_IR_INTB;
+		break;
+	case 3:
+		irq = TXX9_IRQ_BASE + TX4939_IR_INTC;
+		break;
+	case 4:
+		irq = TXX9_IRQ_BASE + TX4939_IR_INTD;
+		break;
+	}
+	return irq;
+}
+
+void __init tx4939_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4939_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4939_PCIC_REG))
+		pr_warning("Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index c7fe6ec..a377e9d 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -34,6 +34,8 @@ static struct pci_controller *hose_head, **hose_tail = &hose_head;
 unsigned long PCIBIOS_MIN_IO	= 0x0000;
 unsigned long PCIBIOS_MIN_MEM	= 0;
 
+static int pci_initialized;
+
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
@@ -74,6 +76,42 @@ pcibios_align_resource(void *data, struct resource *res,
 	res->start = start;
 }
 
+static void __devinit pcibios_scanbus(struct pci_controller *hose)
+{
+	static int next_busno;
+	static int need_domain_info;
+	struct pci_bus *bus;
+
+	if (!hose->iommu)
+		PCI_DMA_BUS_IS_PHYS = 1;
+
+	if (hose->get_busno && pci_probe_only)
+		next_busno = (*hose->get_busno)();
+
+	bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
+	hose->bus = bus;
+
+	need_domain_info = need_domain_info || hose->index;
+	hose->need_domain_info = need_domain_info;
+	if (bus) {
+		next_busno = bus->subordinate + 1;
+		/* Don't allow 8-bit bus number overflow inside the hose -
+		   reserve some space for bridges. */
+		if (next_busno > 224) {
+			next_busno = 0;
+			need_domain_info = 1;
+		}
+
+		if (!pci_probe_only) {
+			pci_bus_size_bridges(bus);
+			pci_bus_assign_resources(bus);
+			pci_enable_bridges(bus);
+		}
+	}
+}
+
+static DEFINE_MUTEX(pci_scan_mutex);
+
 void __devinit register_pci_controller(struct pci_controller *hose)
 {
 	if (request_resource(&iomem_resource, hose->mem_resource) < 0)
@@ -93,6 +131,17 @@ void __devinit register_pci_controller(struct pci_controller *hose)
 		printk(KERN_WARNING
 		       "registering PCI controller with io_map_base unset\n");
 	}
+
+	/*
+	 * Scan the bus if it is register after the PCI subsystem
+	 * initialization.
+	 */
+	if (pci_initialized) {
+		mutex_lock(&pci_scan_mutex);
+		pcibios_scanbus(hose);
+		mutex_unlock(&pci_scan_mutex);
+	}
+
 	return;
 
 out:
@@ -125,38 +174,15 @@ static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
 static int __init pcibios_init(void)
 {
 	struct pci_controller *hose;
-	struct pci_bus *bus;
-	int next_busno;
-	int need_domain_info = 0;
 
 	/* Scan all of the recorded PCI controllers.  */
-	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-
-		if (!hose->iommu)
-			PCI_DMA_BUS_IS_PHYS = 1;
-
-		if (hose->get_busno && pci_probe_only)
-			next_busno = (*hose->get_busno)();
-
-		bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
-		hose->bus = bus;
-		need_domain_info = need_domain_info || hose->index;
-		hose->need_domain_info = need_domain_info;
-		if (bus) {
-			next_busno = bus->subordinate + 1;
-			/* Don't allow 8-bit bus number overflow inside the hose -
-			   reserve some space for bridges. */
-			if (next_busno > 224) {
-				next_busno = 0;
-				need_domain_info = 1;
-			}
-		}
-	}
+	for (hose = hose_head; hose; hose = hose->next)
+		pcibios_scanbus(hose);
 
-	if (!pci_probe_only)
-		pci_assign_unassigned_resources();
 	pci_fixup_irqs(common_swizzle, pcibios_map_irq);
 
+	pci_initialized = 1;
+
 	return 0;
 }
 
diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmc-sierra/msp71xx/Makefile
index 4bba79c..e107f79 100644
--- a/arch/mips/pmc-sierra/msp71xx/Makefile
+++ b/arch/mips/pmc-sierra/msp71xx/Makefile
@@ -3,6 +3,7 @@
 #
 obj-y += msp_prom.o msp_setup.o msp_irq.o \
 	 msp_time.o msp_serial.o msp_elb.o
+obj-$(CONFIG_HAVE_GPIO_LIB) += gpio.o gpio_extended.o
 obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
 obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
 obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio.c b/arch/mips/pmc-sierra/msp71xx/gpio.c
new file mode 100644
index 0000000..69848c5
--- /dev/null
+++ b/arch/mips/pmc-sierra/msp71xx/gpio.c
@@ -0,0 +1,218 @@
+/*
+ * @file /arch/mips/pmc-sierra/msp71xx/gpio.c
+ *
+ * Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two
+ * types of registers. The data register sets the output level when in output
+ * mode and when in input mode will contain the value at the input. The config
+ * register sets the various modes for each gpio.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @author Patrick Glass <patrickglass@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#define MSP71XX_CFG_OFFSET(gpio)	(4 * (gpio))
+#define CONF_MASK			0x0F
+#define MSP71XX_GPIO_INPUT		0x01
+#define MSP71XX_GPIO_OUTPUT		0x08
+
+#define MSP71XX_GPIO_BASE		0x0B8400000L
+
+#define to_msp71xx_gpio_chip(c) container_of(c, struct msp71xx_gpio_chip, chip)
+
+static spinlock_t gpio_lock;
+
+/*
+ * struct msp71xx_gpio_chip - container for gpio chip and registers
+ * @chip: chip structure for the specified gpio bank
+ * @data_reg: register for reading and writing the gpio pin value
+ * @config_reg: register to set the mode for the gpio pin bank
+ * @out_drive_reg: register to set the output drive mode for the gpio pin bank
+ */
+struct msp71xx_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem *data_reg;
+	void __iomem *config_reg;
+	void __iomem *out_drive_reg;
+};
+
+/*
+ * msp71xx_gpio_get() - return the chip's gpio value
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be returned
+ *
+ * It will return 0 if gpio value is low and other if high.
+ */
+static int msp71xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
+
+	return __raw_readl(msp_chip->data_reg) & (1 << offset);
+}
+
+/*
+ * msp71xx_gpio_set() - set the output value for the gpio
+ * @chip: chip structure who controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This will set the gpio bit specified to the desired value. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static void msp71xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
+	unsigned long flags;
+	u32 data;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	data = __raw_readl(msp_chip->data_reg);
+	if (value)
+		data |= (1 << offset);
+	else
+		data &= ~(1 << offset);
+	__raw_writel(data, msp_chip->data_reg);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+/*
+ * msp71xx_set_gpio_mode() - declare the mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @mode: desired configuration for the gpio (see datasheet)
+ *
+ * It will set the gpio pin config to the @mode value passed in.
+ */
+static int msp71xx_set_gpio_mode(struct gpio_chip *chip,
+				 unsigned offset, int mode)
+{
+	struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
+	const unsigned bit_offset = MSP71XX_CFG_OFFSET(offset);
+	unsigned long flags;
+	u32 cfg;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	cfg = __raw_readl(msp_chip->config_reg);
+	cfg &= ~(CONF_MASK << bit_offset);
+	cfg |= (mode << bit_offset);
+	__raw_writel(cfg, msp_chip->config_reg);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+}
+
+/*
+ * msp71xx_direction_output() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This call will set the mode for the @gpio to output. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static int msp71xx_direction_output(struct gpio_chip *chip,
+				    unsigned offset, int value)
+{
+	msp71xx_gpio_set(chip, offset, value);
+
+	return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_OUTPUT);
+}
+
+/*
+ * msp71xx_direction_input() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose to which the value will be assigned
+ *
+ * This call will set the mode for the @gpio to input.
+ */
+static int msp71xx_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_INPUT);
+}
+
+/*
+ * msp71xx_set_output_drive() - declare the output drive for the gpio line
+ * @gpio: gpio pin whose output drive you wish to modify
+ * @value: zero for active drain 1 for open drain drive
+ *
+ * This call will set the output drive mode for the @gpio to output.
+ */
+int msp71xx_set_output_drive(unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 data;
+
+	if (gpio > 15 || gpio < 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	data = __raw_readl((void __iomem *)(MSP71XX_GPIO_BASE + 0x190));
+	if (value)
+		data |= (1 << gpio);
+	else
+		data &= ~(1 << gpio);
+	__raw_writel(data, (void __iomem *)(MSP71XX_GPIO_BASE + 0x190));
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(msp71xx_set_output_drive);
+
+#define MSP71XX_GPIO_BANK(name, dr, cr, base_gpio, num_gpio) \
+{ \
+	.chip = { \
+		.label		  = name, \
+		.direction_input  = msp71xx_direction_input, \
+		.direction_output = msp71xx_direction_output, \
+		.get		  = msp71xx_gpio_get, \
+		.set		  = msp71xx_gpio_set, \
+		.base		  = base_gpio, \
+		.ngpio		  = num_gpio \
+	}, \
+	.data_reg	= (void __iomem *)(MSP71XX_GPIO_BASE + dr), \
+	.config_reg	= (void __iomem *)(MSP71XX_GPIO_BASE + cr), \
+	.out_drive_reg	= (void __iomem *)(MSP71XX_GPIO_BASE + 0x190), \
+}
+
+/*
+ * struct msp71xx_gpio_banks[] - container array of gpio banks
+ * @chip: chip structure for the specified gpio bank
+ * @data_reg: register for reading and writing the gpio pin value
+ * @config_reg: register to set the mode for the gpio pin bank
+ *
+ * This array structure defines the gpio banks for the PMC MIPS Processor.
+ * We specify the bank name, the data register, the config register, base
+ * starting gpio number, and the number of gpios exposed by the bank.
+ */
+static struct msp71xx_gpio_chip msp71xx_gpio_banks[] = {
+
+	MSP71XX_GPIO_BANK("GPIO_1_0", 0x170, 0x180, 0, 2),
+	MSP71XX_GPIO_BANK("GPIO_5_2", 0x174, 0x184, 2, 4),
+	MSP71XX_GPIO_BANK("GPIO_9_6", 0x178, 0x188, 6, 4),
+	MSP71XX_GPIO_BANK("GPIO_15_10", 0x17C, 0x18C, 10, 6),
+};
+
+void __init msp71xx_init_gpio(void)
+{
+	int i;
+
+	spin_lock_init(&gpio_lock);
+
+	for (i = 0; i < ARRAY_SIZE(msp71xx_gpio_banks); i++)
+		gpiochip_add(&msp71xx_gpio_banks[i].chip);
+}
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
new file mode 100644
index 0000000..fc6dbc6
--- /dev/null
+++ b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
@@ -0,0 +1,148 @@
+/*
+ * @file /arch/mips/pmc-sierra/msp71xx/gpio_extended.c
+ *
+ * Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is
+ * a set of hardware registers that have no need for explicit locking as
+ * it is handled by unique method of writing individual set/clr bits.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @author Patrick Glass <patrickglass@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#define MSP71XX_DATA_OFFSET(gpio)	(2 * (gpio))
+#define MSP71XX_READ_OFFSET(gpio)	(MSP71XX_DATA_OFFSET(gpio) + 1)
+#define MSP71XX_CFG_OUT_OFFSET(gpio)	(MSP71XX_DATA_OFFSET(gpio) + 16)
+#define MSP71XX_CFG_IN_OFFSET(gpio)	(MSP71XX_CFG_OUT_OFFSET(gpio) + 1)
+
+#define MSP71XX_EXD_GPIO_BASE	0x0BC000000L
+
+#define to_msp71xx_exd_gpio_chip(c) \
+			container_of(c, struct msp71xx_exd_gpio_chip, chip)
+
+/*
+ * struct msp71xx_exd_gpio_chip - container for gpio chip and registers
+ * @chip: chip structure for the specified gpio bank
+ * @reg: register for control and data of gpio pin
+ */
+struct msp71xx_exd_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem *reg;
+};
+
+/*
+ * msp71xx_exd_gpio_get() - return the chip's gpio value
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be returned
+ *
+ * It will return 0 if gpio value is low and other if high.
+ */
+static int msp71xx_exd_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct msp71xx_exd_gpio_chip *msp71xx_chip =
+	    to_msp71xx_exd_gpio_chip(chip);
+	const unsigned bit = MSP71XX_READ_OFFSET(offset);
+
+	return __raw_readl(msp71xx_chip->reg) & (1 << bit);
+}
+
+/*
+ * msp71xx_exd_gpio_set() - set the output value for the gpio
+ * @chip: chip structure who controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This will set the gpio bit specified to the desired value. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static void msp71xx_exd_gpio_set(struct gpio_chip *chip,
+				 unsigned offset, int value)
+{
+	struct msp71xx_exd_gpio_chip *msp71xx_chip =
+	    to_msp71xx_exd_gpio_chip(chip);
+	const unsigned bit = MSP71XX_DATA_OFFSET(offset);
+
+	__raw_writel(1 << (bit + (value ? 1 : 0)), msp71xx_chip->reg);
+}
+
+/*
+ * msp71xx_exd_direction_output() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This call will set the mode for the @gpio to output. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static int msp71xx_exd_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct msp71xx_exd_gpio_chip *msp71xx_chip =
+	    to_msp71xx_exd_gpio_chip(chip);
+
+	msp71xx_exd_gpio_set(chip, offset, value);
+	__raw_writel(1 << MSP71XX_CFG_OUT_OFFSET(offset), msp71xx_chip->reg);
+	return 0;
+}
+
+/*
+ * msp71xx_exd_direction_input() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose to which the value will be assigned
+ *
+ * This call will set the mode for the @gpio to input.
+ */
+static int msp71xx_exd_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct msp71xx_exd_gpio_chip *msp71xx_chip =
+	    to_msp71xx_exd_gpio_chip(chip);
+
+	__raw_writel(1 << MSP71XX_CFG_IN_OFFSET(offset), msp71xx_chip->reg);
+	return 0;
+}
+
+#define MSP71XX_EXD_GPIO_BANK(name, exd_reg, base_gpio, num_gpio) \
+{ \
+	.chip = { \
+		.label		  = name, \
+		.direction_input  = msp71xx_exd_direction_input, \
+		.direction_output = msp71xx_exd_direction_output, \
+		.get		  = msp71xx_exd_gpio_get, \
+		.set		  = msp71xx_exd_gpio_set, \
+		.base		  = base_gpio, \
+		.ngpio		  = num_gpio, \
+	}, \
+	.reg	= (void __iomem *)(MSP71XX_EXD_GPIO_BASE + exd_reg), \
+}
+
+/*
+ * struct msp71xx_exd_gpio_banks[] - container array of gpio banks
+ * @chip: chip structure for the specified gpio bank
+ * @reg: register for reading and writing the gpio pin value
+ *
+ * This array structure defines the extended gpio banks for the
+ * PMC MIPS Processor. We specify the bank name, the data/config
+ * register,the base starting gpio number, and the number of
+ * gpios exposed by the bank of gpios.
+ */
+static struct msp71xx_exd_gpio_chip msp71xx_exd_gpio_banks[] = {
+
+	MSP71XX_EXD_GPIO_BANK("GPIO_23_16", 0x188, 16, 8),
+	MSP71XX_EXD_GPIO_BANK("GPIO_27_24", 0x18C, 24, 4),
+};
+
+void __init msp71xx_init_gpio_extended(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(msp71xx_exd_gpio_banks); i++)
+		gpiochip_add(&msp71xx_exd_gpio_banks[i].chip);
+}
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 6537d90..2d3c0dc 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -79,14 +79,14 @@ unsigned long read_persistent_clock(void)
 	/* Stop the update to the time */
 	m48t37_base->control = 0x40;
 
-	year = BCD2BIN(m48t37_base->year);
-	year += BCD2BIN(m48t37_base->century) * 100;
+	year = bcd2bin(m48t37_base->year);
+	year += bcd2bin(m48t37_base->century) * 100;
 
-	month = BCD2BIN(m48t37_base->month);
-	day = BCD2BIN(m48t37_base->date);
-	hour = BCD2BIN(m48t37_base->hour);
-	min = BCD2BIN(m48t37_base->min);
-	sec = BCD2BIN(m48t37_base->sec);
+	month = bcd2bin(m48t37_base->month);
+	day = bcd2bin(m48t37_base->date);
+	hour = bcd2bin(m48t37_base->hour);
+	min = bcd2bin(m48t37_base->min);
+	sec = bcd2bin(m48t37_base->sec);
 
 	/* Start the update to the time again */
 	m48t37_base->control = 0x00;
@@ -113,22 +113,22 @@ int rtc_mips_set_time(unsigned long tim)
 	m48t37_base->control = 0x80;
 
 	/* year */
-	m48t37_base->year = BIN2BCD(tm.tm_year % 100);
-	m48t37_base->century = BIN2BCD(tm.tm_year / 100);
+	m48t37_base->year = bin2bcd(tm.tm_year % 100);
+	m48t37_base->century = bin2bcd(tm.tm_year / 100);
 
 	/* month */
-	m48t37_base->month = BIN2BCD(tm.tm_mon);
+	m48t37_base->month = bin2bcd(tm.tm_mon);
 
 	/* day */
-	m48t37_base->date = BIN2BCD(tm.tm_mday);
+	m48t37_base->date = bin2bcd(tm.tm_mday);
 
 	/* hour/min/sec */
-	m48t37_base->hour = BIN2BCD(tm.tm_hour);
-	m48t37_base->min = BIN2BCD(tm.tm_min);
-	m48t37_base->sec = BIN2BCD(tm.tm_sec);
+	m48t37_base->hour = bin2bcd(tm.tm_hour);
+	m48t37_base->min = bin2bcd(tm.tm_min);
+	m48t37_base->sec = bin2bcd(tm.tm_sec);
 
 	/* day of week -- not really used, but let's keep it up-to-date */
-	m48t37_base->day = BIN2BCD(tm.tm_wday + 1);
+	m48t37_base->day = bin2bcd(tm.tm_wday + 1);
 
 	/* disable writing */
 	m48t37_base->control = 0x00;
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 82ab395..31619c6 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -34,21 +34,11 @@
 #include <asm/mach-rc32434/rb.h>
 #include <asm/mach-rc32434/integ.h>
 #include <asm/mach-rc32434/gpio.h>
-
-#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
-#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
-#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
-#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
+#include <asm/mach-rc32434/irq.h>
 
 #define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
 #define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
 
-/* NAND definitions */
-#define GPIO_RDY (1 << 0x08)
-#define GPIO_WPX (1 << 0x09)
-#define GPIO_ALE (1 << 0x0a)
-#define GPIO_CLE (1 << 0x0b)
-
 static struct resource korina_dev0_res[] = {
 	{
 		.name = "korina_regs",
@@ -94,15 +84,13 @@ static struct korina_device korina_dev0_data = {
 };
 
 static struct platform_device korina_dev0 = {
-	.id = 0,
+	.id = -1,
 	.name = "korina",
 	.dev.platform_data = &korina_dev0_data,
 	.resource = korina_dev0_res,
 	.num_resources = ARRAY_SIZE(korina_dev0_res),
 };
 
-#define CF_GPIO_NUM 13
-
 static struct resource cf_slot0_res[] = {
 	{
 		.name = "cf_membase",
@@ -116,11 +104,11 @@ static struct resource cf_slot0_res[] = {
 };
 
 static struct cf_device cf_slot0_data = {
-	.gpio_pin = 13
+	.gpio_pin = CF_GPIO_NUM
 };
 
 static struct platform_device cf_slot0 = {
-	.id = 0,
+	.id = -1,
 	.name = "pata-rb532-cf",
 	.dev.platform_data = &cf_slot0_data,
 	.resource = cf_slot0_res,
@@ -185,7 +173,7 @@ static struct mtd_partition rb532_partition_info[] = {
 
 static struct platform_device rb532_led = {
 	.name = "rb532-led",
-	.id = 0,
+	.id = -1,
 };
 
 static struct gpio_keys_button rb532_gpio_btn[] = {
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 00a1c78..76a7fd9 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -27,28 +27,31 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <linux/spinlock.h>
-#include <linux/io.h>
 #include <linux/platform_device.h>
-
-#include <asm/addrspace.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-rc32434/rb.h>
-
-struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
-EXPORT_SYMBOL(rb532_gpio_reg0);
+#include <asm/mach-rc32434/gpio.h>
+
+struct rb532_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem	 *regbase;
+	void		(*set_int_level)(struct gpio_chip *chip, unsigned offset, int value);
+	int		(*get_int_level)(struct gpio_chip *chip, unsigned offset);
+	void		(*set_int_status)(struct gpio_chip *chip, unsigned offset, int value);
+	int		(*get_int_status)(struct gpio_chip *chip, unsigned offset);
+};
 
 struct mpmc_device dev3;
 
 static struct resource rb532_gpio_reg0_res[] = {
 	{
 		.name 	= "gpio_reg0",
-		.start 	= (u32)(IDT434_REG_BASE + GPIOBASE),
-		.end 	= (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+		.start 	= REGBASE + GPIOBASE,
+		.end 	= REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
 		.flags 	= IORESOURCE_MEM,
 	}
 };
@@ -56,8 +59,8 @@ static struct resource rb532_gpio_reg0_res[] = {
 static struct resource rb532_dev3_ctl_res[] = {
 	{
 		.name	= "dev3_ctl",
-		.start	= (u32)(IDT434_REG_BASE + DEV3BASE),
-		.end	= (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+		.start	= REGBASE + DEV3BASE,
+		.end	= REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
 		.flags	= IORESOURCE_MEM,
 	}
 };
@@ -70,7 +73,7 @@ void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
 
 	spin_lock_irqsave(&dev3.lock, flags);
 
-	data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
+	data = readl(IDT434_REG_BASE + reg_offs);
 	for (i = 0; i != len; ++i) {
 		if (val & (1 << i))
 			data |= (1 << (i + bit));
@@ -108,108 +111,199 @@ unsigned char get_latch_u5(void)
 }
 EXPORT_SYMBOL(get_latch_u5);
 
-int rb532_gpio_get_value(unsigned gpio)
+/*
+ * Return GPIO level */
+static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
+	u32			mask = 1 << offset;
+	struct rb532_gpio_chip	*gpch;
+
+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	return readl(gpch->regbase + GPIOD) & mask;
 }
-EXPORT_SYMBOL(rb532_gpio_get_value);
 
-void rb532_gpio_set_value(unsigned gpio, int value)
+/*
+ * Set output GPIO level
+ */
+static void rb532_gpio_set(struct gpio_chip *chip,
+				unsigned offset, int value)
 {
-	unsigned tmp;
+	unsigned long		flags;
+	u32			mask = 1 << offset;
+	u32			tmp;
+	struct rb532_gpio_chip	*gpch;
+	void __iomem		*gpvr;
 
-	tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
-	if (value)
-		tmp |= 1 << gpio;
+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	gpvr = gpch->regbase + GPIOD;
 
-	writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
+	local_irq_save(flags);
+	tmp = readl(gpvr);
+	if (value)
+		tmp |= mask;
+	else
+		tmp &= ~mask;
+	writel(tmp, gpvr);
+	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(rb532_gpio_set_value);
 
-int rb532_gpio_direction_input(unsigned gpio)
+/*
+ * Set GPIO direction to input
+ */
+static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
-	writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
-	       (void *)&rb532_gpio_reg0->gpiocfg);
+	unsigned long		flags;
+	u32			mask = 1 << offset;
+	u32			value;
+	struct rb532_gpio_chip	*gpch;
+	void __iomem		*gpdr;
 
-	return 0;
-}
-EXPORT_SYMBOL(rb532_gpio_direction_input);
+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	gpdr = gpch->regbase + GPIOCFG;
 
-int rb532_gpio_direction_output(unsigned gpio, int value)
-{
-	gpio_set_value(gpio, value);
-	writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
-	       (void *)&rb532_gpio_reg0->gpiocfg);
+	local_irq_save(flags);
+	value = readl(gpdr);
+	value &= ~mask;
+	writel(value, gpdr);
+	local_irq_restore(flags);
 
 	return 0;
 }
-EXPORT_SYMBOL(rb532_gpio_direction_output);
 
-void rb532_gpio_set_int_level(unsigned gpio, int value)
+/*
+ * Set GPIO direction to output
+ */
+static int rb532_gpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
 {
-	unsigned tmp;
+	unsigned long		flags;
+	u32			mask = 1 << offset;
+	u32			tmp;
+	struct rb532_gpio_chip	*gpch;
+	void __iomem		*gpdr;
+
+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	writel(mask, gpch->regbase + GPIOD);
+	gpdr = gpch->regbase + GPIOCFG;
+
+	local_irq_save(flags);
+	tmp = readl(gpdr);
+	tmp |= mask;
+	writel(tmp, gpdr);
+	local_irq_restore(flags);
 
-	tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
-	if (value)
-		tmp |= 1 << gpio;
-	writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
+	return 0;
 }
-EXPORT_SYMBOL(rb532_gpio_set_int_level);
 
-int rb532_gpio_get_int_level(unsigned gpio)
+/*
+ * Set the GPIO interrupt level
+ */
+static void rb532_gpio_set_int_level(struct gpio_chip *chip,
+					unsigned offset, int value)
 {
-	return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb532_gpio_get_int_level);
+	unsigned long		flags;
+	u32			mask = 1 << offset;
+	u32			tmp;
+	struct rb532_gpio_chip	*gpch;
+	void __iomem		*gpil;
 
-void rb532_gpio_set_int_status(unsigned gpio, int value)
-{
-	unsigned tmp;
+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	gpil = gpch->regbase + GPIOILEVEL;
 
-	tmp = readl(&rb532_gpio_reg0->gpioistat);
+	local_irq_save(flags);
+	tmp = readl(gpil);
 	if (value)
-		tmp |= 1 << gpio;
-	writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
+		tmp |= mask;
+	else
+		tmp &= ~mask;
+	writel(tmp, gpil);
+	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(rb532_gpio_set_int_status);
 
-int rb532_gpio_get_int_status(unsigned gpio)
+/*
+ * Get the GPIO interrupt level
+ */
+static int rb532_gpio_get_int_level(struct gpio_chip *chip, unsigned offset)
 {
-	return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
+	u32			mask = 1 << offset;
+	struct rb532_gpio_chip	*gpch;
+
+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	return readl(gpch->regbase + GPIOILEVEL) & mask;
 }
-EXPORT_SYMBOL(rb532_gpio_get_int_status);
 
-void rb532_gpio_set_func(unsigned gpio, int value)
+/*
+ * Set the GPIO interrupt status
+ */
+static void rb532_gpio_set_int_status(struct gpio_chip *chip,
+				unsigned offset, int value)
 {
-	unsigned tmp;
+	unsigned long		flags;
+	u32			mask = 1 << offset;
+	u32			tmp;
+	struct rb532_gpio_chip	*gpch;
+	void __iomem		*gpis;
+
+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	gpis = gpch->regbase + GPIOISTAT;
 
-	tmp = readl(&rb532_gpio_reg0->gpiofunc);
+	local_irq_save(flags);
+	tmp = readl(gpis);
 	if (value)
-		tmp |= 1 << gpio;
-	writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
+		tmp |= mask;
+	else
+		tmp &= ~mask;
+	writel(tmp, gpis);
+	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(rb532_gpio_set_func);
 
-int rb532_gpio_get_func(unsigned gpio)
+/*
+ * Get the GPIO interrupt status
+ */
+static int rb532_gpio_get_int_status(struct gpio_chip *chip, unsigned offset)
 {
-	return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
+	u32			mask = 1 << offset;
+	struct rb532_gpio_chip	*gpch;
+
+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	return readl(gpch->regbase + GPIOISTAT) & mask;
 }
-EXPORT_SYMBOL(rb532_gpio_get_func);
+
+static struct rb532_gpio_chip rb532_gpio_chip[] = {
+	[0] = {
+		.chip = {
+			.label			= "gpio0",
+			.direction_input	= rb532_gpio_direction_input,
+			.direction_output	= rb532_gpio_direction_output,
+			.get			= rb532_gpio_get,
+			.set			= rb532_gpio_set,
+			.base			= 0,
+			.ngpio			= 32,
+		},
+		.get_int_level		= rb532_gpio_get_int_level,
+		.set_int_level		= rb532_gpio_set_int_level,
+		.get_int_status		= rb532_gpio_get_int_status,
+		.set_int_status		= rb532_gpio_set_int_status,
+	},
+};
 
 int __init rb532_gpio_init(void)
 {
-	rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
-				rb532_gpio_reg0_res[0].end -
-				rb532_gpio_reg0_res[0].start);
+	struct resource *r;
 
-	if (!rb532_gpio_reg0) {
+	r = rb532_gpio_reg0_res;
+	rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start);
+
+	if (!rb532_gpio_chip->regbase) {
 		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
 		return -ENXIO;
 	}
 
-	dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
-				rb532_dev3_ctl_res[0].end -
-				rb532_dev3_ctl_res[0].start);
+	/* Register our GPIO chip */
+	gpiochip_add(&rb532_gpio_chip->chip);
+
+	r = rb532_dev3_ctl_res;
+	dev3.base = ioremap_nocache(r->start, r->end - r->start);
 
 	if (!dev3.base) {
 		printk(KERN_ERR "rb532: cannot remap device controller 3\n");
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
index c0d0f95..549b46d 100644
--- a/arch/mips/rb532/irq.c
+++ b/arch/mips/rb532/irq.c
@@ -45,7 +45,7 @@
 #include <asm/mipsregs.h>
 #include <asm/system.h>
 
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/irq.h>
 
 struct intr_group {
 	u32 mask;	/* mask of valid bits in pending/mask registers */
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
index 1bc0af8..46ca24d 100644
--- a/arch/mips/rb532/prom.c
+++ b/arch/mips/rb532/prom.c
@@ -37,12 +37,8 @@
 #include <asm/mach-rc32434/ddr.h>
 #include <asm/mach-rc32434/prom.h>
 
-extern void __init setup_serial_port(void);
-
 unsigned int idt_cpu_freq = 132000000;
 EXPORT_SYMBOL(idt_cpu_freq);
-unsigned int gpio_bootup_state;
-EXPORT_SYMBOL(gpio_bootup_state);
 
 static struct resource ddr_reg[] = {
 	{
@@ -108,9 +104,6 @@ void __init prom_setup_cmdline(void)
 				mips_machtype = MACH_MIKROTIK_RB532;
 		}
 
-		if (match_tag(prom_argv[i], GPIO_TAG))
-			gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
-
 		strcpy(cp, prom_argv[i]);
 		cp += strlen(prom_argv[i]);
 	}
@@ -122,11 +115,6 @@ void __init prom_setup_cmdline(void)
 		strcpy(cp, arcs_cmdline);
 		cp += strlen(arcs_cmdline);
 	}
-	if (gpio_bootup_state & 0x02)
-		strcpy(cp, GPIO_INIT_NOBUTTON);
-	else
-		strcpy(cp, GPIO_INIT_BUTTON);
-
 	cmd_line[CL_SIZE-1] = '\0';
 
 	strcpy(arcs_cmdline, cmd_line);
diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
index 1a05b5d..3e0d7ec 100644
--- a/arch/mips/rb532/serial.c
+++ b/arch/mips/rb532/serial.c
@@ -31,16 +31,16 @@
 #include <linux/serial_8250.h>
 
 #include <asm/serial.h>
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/rb.h>
 
 extern unsigned int idt_cpu_freq;
 
 static struct uart_port rb532_uart = {
 	.type = PORT_16550A,
 	.line = 0,
-	.irq = RC32434_UART0_IRQ,
+	.irq = UART0_IRQ,
 	.iotype = UPIO_MEM,
-	.membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
+	.membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
 	.regshift = 2
 };
 
diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
index 7aafa95..50f530f 100644
--- a/arch/mips/rb532/setup.c
+++ b/arch/mips/rb532/setup.c
@@ -9,7 +9,7 @@
 #include <asm/time.h>
 #include <linux/ioport.h>
 
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/rb.h>
 #include <asm/mach-rc32434/pci.h>
 
 struct pci_reg __iomem *pci_reg;
@@ -27,7 +27,7 @@ static struct resource pci0_res[] = {
 static void rb_machine_restart(char *command)
 {
 	/* just jump to the reset vector */
-	writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+	writel(0x80000001, IDT434_REG_BASE + RST);
 	((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
 }
 
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
index 8e7a468..1377d59 100644
--- a/arch/mips/rb532/time.c
+++ b/arch/mips/rb532/time.c
@@ -28,7 +28,6 @@
 #include <linux/timex.h>
 
 #include <asm/mipsregs.h>
-#include <asm/debug.h>
 #include <asm/time.h>
 #include <asm/mach-rc32434/rc32434.h>
 
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 52486c4d..deddbf0 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -192,3 +192,18 @@ static int __init sgi_button_devinit(void)
 }
 
 device_initcall(sgi_button_devinit);
+
+static int __init sgi_ds1286_devinit(void)
+{
+	struct resource res;
+
+	memset(&res, 0, sizeof(res));
+	res.start = HPC3_CHIP0_BASE + offsetof(struct hpc3_regs, rtcregs);
+	res.end = res.start + sizeof(hpc3c0->rtcregs) - 1;
+	res.flags = IORESOURCE_MEM;
+
+	return IS_ERR(platform_device_register_simple("rtc-ds1286", -1,
+						      &res, 1));
+}
+
+device_initcall(sgi_ds1286_devinit);
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 896a1ef..b9a9313 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -4,7 +4,6 @@
  * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
  * Copyright (C) 1997, 1998 Ralf Baechle (ralf@gnu.org)
  */
-#include <linux/ds1286.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/kdev_t.h>
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index 10e5054..3dcb27e 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -10,7 +10,6 @@
  * Copyright (C) 2003, 06 Ralf Baechle (ralf@linux-mips.org)
  */
 #include <linux/bcd.h>
-#include <linux/ds1286.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
@@ -29,69 +28,6 @@
 #include <asm/sgi/hpc3.h>
 #include <asm/sgi/ip22.h>
 
-/*
- * Note that mktime uses month from 1 to 12 while rtc_time_to_tm
- * uses 0 to 11.
- */
-unsigned long read_persistent_clock(void)
-{
-	unsigned int yrs, mon, day, hrs, min, sec;
-	unsigned int save_control;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
-	hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
-
-	sec = BCD2BIN(hpc3c0->rtcregs[RTC_SECONDS] & 0xff);
-	min = BCD2BIN(hpc3c0->rtcregs[RTC_MINUTES] & 0xff);
-	hrs = BCD2BIN(hpc3c0->rtcregs[RTC_HOURS] & 0x3f);
-	day = BCD2BIN(hpc3c0->rtcregs[RTC_DATE] & 0xff);
-	mon = BCD2BIN(hpc3c0->rtcregs[RTC_MONTH] & 0x1f);
-	yrs = BCD2BIN(hpc3c0->rtcregs[RTC_YEAR] & 0xff);
-
-	hpc3c0->rtcregs[RTC_CMD] = save_control;
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	if (yrs < 45)
-		yrs += 30;
-	if ((yrs += 40) < 70)
-		yrs += 100;
-
-	return mktime(yrs + 1900, mon, day, hrs, min, sec);
-}
-
-int rtc_mips_set_time(unsigned long tim)
-{
-	struct rtc_time tm;
-	unsigned int save_control;
-	unsigned long flags;
-
-	rtc_time_to_tm(tim, &tm);
-
-	tm.tm_mon += 1;		/* tm_mon starts at zero */
-	tm.tm_year -= 40;
-	if (tm.tm_year >= 100)
-		tm.tm_year -= 100;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
-	hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
-
-	hpc3c0->rtcregs[RTC_YEAR] = BIN2BCD(tm.tm_year);
-	hpc3c0->rtcregs[RTC_MONTH] = BIN2BCD(tm.tm_mon);
-	hpc3c0->rtcregs[RTC_DATE] = BIN2BCD(tm.tm_mday);
-	hpc3c0->rtcregs[RTC_HOURS] = BIN2BCD(tm.tm_hour);
-	hpc3c0->rtcregs[RTC_MINUTES] = BIN2BCD(tm.tm_min);
-	hpc3c0->rtcregs[RTC_SECONDS] = BIN2BCD(tm.tm_sec);
-	hpc3c0->rtcregs[RTC_HUNDREDTH_SECOND] = 0;
-
-	hpc3c0->rtcregs[RTC_CMD] = save_control;
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return 0;
-}
-
 static unsigned long dosample(void)
 {
 	u32 ct0, ct1;
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 8b4e854..1327c27 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -13,12 +13,12 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/mm.h>
+#include <linux/platform_device.h>
 
 #include <asm/time.h>
 #include <asm/pgtable.h>
 #include <asm/sgialib.h>
 #include <asm/sn/ioc3.h>
-#include <asm/m48t35.h>
 #include <asm/sn/klconfig.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/addrs.h>
@@ -28,51 +28,6 @@
 
 #define TICK_SIZE (tick_nsec / 1000)
 
-#if 0
-static int set_rtc_mmss(unsigned long nowtime)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	struct m48t35_rtc *rtc;
-	nasid_t nid;
-
-	nid = get_nasid();
-	rtc = (struct m48t35_rtc *)(KL_CONFIG_CH_CONS_INFO(nid)->memory_base +
-							IOC3_BYTEBUS_DEV0);
-
-	rtc->control |= M48T35_RTC_READ;
-	cmos_minutes = BCD2BIN(rtc->min);
-	rtc->control &= ~M48T35_RTC_READ;
-
-	/*
-	 * Since we're only adjusting minutes and seconds, don't interfere with
-	 * hour overflow. This avoids messing with unknown time zones but
-	 * requires your RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;	/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		real_seconds = BIN2BCD(real_seconds);
-		real_minutes = BIN2BCD(real_minutes);
-		rtc->control |= M48T35_RTC_SET;
-		rtc->sec = real_seconds;
-		rtc->min = real_minutes;
-		rtc->control &= ~M48T35_RTC_SET;
-	} else {
-		printk(KERN_WARNING
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	return retval;
-}
-#endif
-
 /* Includes for ioc3_init().  */
 #include <asm/sn/types.h>
 #include <asm/sn/sn0/addrs.h>
@@ -80,37 +35,6 @@ static int set_rtc_mmss(unsigned long nowtime)
 #include <asm/sn/sn0/hubio.h>
 #include <asm/pci/bridge.h>
 
-unsigned long read_persistent_clock(void)
-{
-        unsigned int year, month, date, hour, min, sec;
-	struct m48t35_rtc *rtc;
-	nasid_t nid;
-
-	nid = get_nasid();
-	rtc = (struct m48t35_rtc *)(KL_CONFIG_CH_CONS_INFO(nid)->memory_base +
-							IOC3_BYTEBUS_DEV0);
-
-	rtc->control |= M48T35_RTC_READ;
-	sec = rtc->sec;
-	min = rtc->min;
-	hour = rtc->hour;
-	date = rtc->date;
-	month = rtc->month;
-	year = rtc->year;
-	rtc->control &= ~M48T35_RTC_READ;
-
-        sec = BCD2BIN(sec);
-        min = BCD2BIN(min);
-        hour = BCD2BIN(hour);
-        date = BCD2BIN(date);
-        month = BCD2BIN(month);
-        year = BCD2BIN(year);
-
-        year += 1970;
-
-        return mktime(year, month, date, hour, min, sec);
-}
-
 static void enable_rt_irq(unsigned int irq)
 {
 }
@@ -286,6 +210,7 @@ void __cpuinit cpu_time_init(void)
 
 void __cpuinit hub_rtc_init(cnodeid_t cnode)
 {
+
 	/*
 	 * We only need to initialize the current node.
 	 * If this is not the current node then it is a cpuless
@@ -301,3 +226,23 @@ void __cpuinit hub_rtc_init(cnodeid_t cnode)
 		LOCAL_HUB_S(PI_RT_PEND_B, 0);
 	}
 }
+
+static int __init sgi_ip27_rtc_devinit(void)
+{
+	struct resource res;
+
+	memset(&res, 0, sizeof(res));
+	res.start = XPHYSADDR(KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base +
+			      IOC3_BYTEBUS_DEV0);
+	res.end = res.start + 32767;
+	res.flags = IORESOURCE_MEM;
+
+	return IS_ERR(platform_device_register_simple("rtc-m48t35", -1,
+						      &res, 1));
+}
+
+/*
+ * kludge make this a device_initcall after ioc3 resource conflicts
+ * are resolved
+ */
+late_initcall(sgi_ip27_rtc_devinit);
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 3d63721..511e9ff 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -90,6 +90,22 @@ static __init int sgio2btns_devinit(void)
 
 device_initcall(sgio2btns_devinit);
 
+static struct resource sgio2_cmos_rsrc[] = {
+	{
+		.start = 0x70,
+		.end   = 0x71,
+		.flags = IORESOURCE_IO
+	}
+};
+
+static __init int sgio2_cmos_devinit(void)
+{
+	return IS_ERR(platform_device_register_simple("rtc_cmos", -1,
+						      sgio2_cmos_rsrc, 1));
+}
+
+device_initcall(sgio2_cmos_devinit);
+
 MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 1024bf4..c5a5d4a 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -62,11 +62,6 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
 }
 #endif
 
-unsigned long read_persistent_clock(void)
-{
-	return mc146818_get_cmos_time();
-}
-
 /* An arbitrary time; this can be decreased if reliability looks good */
 #define WAIT_MS 10
 
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 66e3e3f..637a194 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -576,8 +576,7 @@ static int __init sbprof_tb_init(void)
 
 	tb_class = tbc;
 
-	dev = device_create_drvdata(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0),
-				    NULL, "tb");
+	dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), NULL, "tb");
 	if (IS_ERR(dev)) {
 		err = PTR_ERR(dev);
 		goto out_class;
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index f18ba92..7b45f19 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,3 +1,4 @@
-obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y				:= platform.o setup.o rtc_xicor1241.o \
+				   rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o
diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c
new file mode 100644
index 0000000..54847fe
--- /dev/null
+++ b/arch/mips/sibyte/swarm/platform.c
@@ -0,0 +1,85 @@
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/sibyte/board.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/sb1250_regs.h>
+
+#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR)
+
+#define DRV_NAME	"pata-swarm"
+
+#define SWARM_IDE_SHIFT	5
+#define SWARM_IDE_BASE	0x1f0
+#define SWARM_IDE_CTRL	0x3f6
+
+static struct resource swarm_pata_resource[] = {
+	{
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_IRQ,
+		.start	= K_INT_GB_IDE,
+		.end	= K_INT_GB_IDE,
+	},
+};
+
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift	= SWARM_IDE_SHIFT,
+};
+
+static struct platform_device swarm_pata_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.resource	= swarm_pata_resource,
+	.num_resources	= ARRAY_SIZE(swarm_pata_resource),
+	.dev  = {
+		.platform_data		= &pata_platform_data,
+		.coherent_dma_mask	= ~0,	/* grumble */
+	},
+};
+
+static int __init swarm_pata_init(void)
+{
+	u8 __iomem *base;
+	phys_t offset, size;
+	struct resource *r;
+
+	if (!SIBYTE_HAVE_IDE)
+		return -ENODEV;
+
+	base = ioremap(A_IO_EXT_BASE, 0x800);
+	offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
+	size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
+	iounmap(base);
+
+	offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
+	size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
+	if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
+		pr_info(DRV_NAME ": PATA interface at GenBus disabled\n");
+
+		return -EBUSY;
+	}
+
+	pr_info(DRV_NAME ": PATA interface at GenBus slot %i\n", IDE_CS);
+
+	r = swarm_pata_resource;
+	r[0].start = offset + (SWARM_IDE_BASE << SWARM_IDE_SHIFT);
+	r[0].end   = offset + ((SWARM_IDE_BASE + 8) << SWARM_IDE_SHIFT) - 1;
+	r[1].start = offset + (SWARM_IDE_CTRL << SWARM_IDE_SHIFT);
+	r[1].end   = offset + ((SWARM_IDE_CTRL + 1) << SWARM_IDE_SHIFT) - 1;
+
+	return platform_device_register(&swarm_pata_device);
+}
+
+device_initcall(swarm_pata_init);
+
+#endif /* defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) */
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
index 26fbff4..b732600 100644
--- a/arch/mips/sibyte/swarm/rtc_m41t81.c
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -156,32 +156,32 @@ int m41t81_set_time(unsigned long t)
 	 */
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	tm.tm_sec = BIN2BCD(tm.tm_sec);
+	tm.tm_sec = bin2bcd(tm.tm_sec);
 	m41t81_write(M41T81REG_SC, tm.tm_sec);
 
-	tm.tm_min = BIN2BCD(tm.tm_min);
+	tm.tm_min = bin2bcd(tm.tm_min);
 	m41t81_write(M41T81REG_MN, tm.tm_min);
 
-	tm.tm_hour = BIN2BCD(tm.tm_hour);
+	tm.tm_hour = bin2bcd(tm.tm_hour);
 	tm.tm_hour = (tm.tm_hour & 0x3f) | (m41t81_read(M41T81REG_HR) & 0xc0);
 	m41t81_write(M41T81REG_HR, tm.tm_hour);
 
 	/* tm_wday starts from 0 to 6 */
 	if (tm.tm_wday == 0) tm.tm_wday = 7;
-	tm.tm_wday = BIN2BCD(tm.tm_wday);
+	tm.tm_wday = bin2bcd(tm.tm_wday);
 	m41t81_write(M41T81REG_DY, tm.tm_wday);
 
-	tm.tm_mday = BIN2BCD(tm.tm_mday);
+	tm.tm_mday = bin2bcd(tm.tm_mday);
 	m41t81_write(M41T81REG_DT, tm.tm_mday);
 
 	/* tm_mon starts from 0, *ick* */
 	tm.tm_mon ++;
-	tm.tm_mon = BIN2BCD(tm.tm_mon);
+	tm.tm_mon = bin2bcd(tm.tm_mon);
 	m41t81_write(M41T81REG_MO, tm.tm_mon);
 
 	/* we don't do century, everything is beyond 2000 */
 	tm.tm_year %= 100;
-	tm.tm_year = BIN2BCD(tm.tm_year);
+	tm.tm_year = bin2bcd(tm.tm_year);
 	m41t81_write(M41T81REG_YR, tm.tm_year);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
@@ -209,12 +209,12 @@ unsigned long m41t81_get_time(void)
 	year = m41t81_read(M41T81REG_YR);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	sec = BCD2BIN(sec);
-	min = BCD2BIN(min);
-	hour = BCD2BIN(hour);
-	day = BCD2BIN(day);
-	mon = BCD2BIN(mon);
-	year = BCD2BIN(year);
+	sec = bcd2bin(sec);
+	min = bcd2bin(min);
+	hour = bcd2bin(hour);
+	day = bcd2bin(day);
+	mon = bcd2bin(mon);
+	year = bcd2bin(year);
 
 	year += 2000;
 
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
index ff3e5da..4438b21 100644
--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -124,18 +124,18 @@ int xicor_set_time(unsigned long t)
 	xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
 
 	/* trivial ones */
-	tm.tm_sec = BIN2BCD(tm.tm_sec);
+	tm.tm_sec = bin2bcd(tm.tm_sec);
 	xicor_write(X1241REG_SC, tm.tm_sec);
 
-	tm.tm_min = BIN2BCD(tm.tm_min);
+	tm.tm_min = bin2bcd(tm.tm_min);
 	xicor_write(X1241REG_MN, tm.tm_min);
 
-	tm.tm_mday = BIN2BCD(tm.tm_mday);
+	tm.tm_mday = bin2bcd(tm.tm_mday);
 	xicor_write(X1241REG_DT, tm.tm_mday);
 
 	/* tm_mon starts from 0, *ick* */
 	tm.tm_mon ++;
-	tm.tm_mon = BIN2BCD(tm.tm_mon);
+	tm.tm_mon = bin2bcd(tm.tm_mon);
 	xicor_write(X1241REG_MO, tm.tm_mon);
 
 	/* year is split */
@@ -148,7 +148,7 @@ int xicor_set_time(unsigned long t)
 	tmp = xicor_read(X1241REG_HR);
 	if (tmp & X1241REG_HR_MIL) {
 		/* 24 hour format */
-		tm.tm_hour = BIN2BCD(tm.tm_hour);
+		tm.tm_hour = bin2bcd(tm.tm_hour);
 		tmp = (tmp & ~0x3f) | (tm.tm_hour & 0x3f);
 	} else {
 		/* 12 hour format, with 0x2 for pm */
@@ -157,7 +157,7 @@ int xicor_set_time(unsigned long t)
 			tmp |= 0x20;
 			tm.tm_hour -= 12;
 		}
-		tm.tm_hour = BIN2BCD(tm.tm_hour);
+		tm.tm_hour = bin2bcd(tm.tm_hour);
 		tmp |= tm.tm_hour;
 	}
 	xicor_write(X1241REG_HR, tmp);
@@ -191,13 +191,13 @@ unsigned long xicor_get_time(void)
 	y2k = xicor_read(X1241REG_Y2K);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	sec = BCD2BIN(sec);
-	min = BCD2BIN(min);
-	hour = BCD2BIN(hour);
-	day = BCD2BIN(day);
-	mon = BCD2BIN(mon);
-	year = BCD2BIN(year);
-	y2k = BCD2BIN(y2k);
+	sec = bcd2bin(sec);
+	min = bcd2bin(min);
+	hour = bcd2bin(hour);
+	day = bcd2bin(day);
+	mon = bcd2bin(mon);
+	year = bcd2bin(year);
+	y2k = bcd2bin(y2k);
 
 	year += (y2k * 100);
 
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 840fe75..17052db 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -45,6 +45,14 @@ config TOSHIBA_RBTX4938
 	  This Toshiba board is based on the TX4938 processor. Say Y here to
 	  support this machine type
 
+config TOSHIBA_RBTX4939
+	bool "Toshiba RBTX4939 bobard"
+	depends on MACH_TX49XX
+	select SOC_TX4939
+	help
+	  This Toshiba board is based on the TX4939 processor. Say Y here to
+	  support this machine type
+
 config SOC_TX3927
 	bool
 	select CEVT_TXX9
@@ -71,6 +79,13 @@ config SOC_TX4938
 	select PCI_TX4927
 	select GPIO_TXX9
 
+config SOC_TX4939
+	bool
+	select CEVT_TXX9
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select PCI_TX4927
+
 config TOSHIBA_FPCIB0
 	bool "FPCIB0 Backplane Support"
 	depends on PCI && MACH_TXX9
@@ -94,16 +109,11 @@ config TOSHIBA_RBTX4938_MPLEX_NAND
 	bool "NAND"
 config TOSHIBA_RBTX4938_MPLEX_ATA
 	bool "ATA"
+config TOSHIBA_RBTX4938_MPLEX_KEEP
+	bool "Keep firmware settings"
 
 endchoice
 
-config TX4938_NAND_BOOT
-	depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
-	bool "NAND Boot Support (EXPERIMENTAL)"
-	help
-	  This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
-	  Select this option if you need to use NAND boot.
-
 endif
 
 config PCI_TX4927
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
index 9bb34af..0030d23 100644
--- a/arch/mips/txx9/generic/Makefile
+++ b/arch/mips/txx9/generic/Makefile
@@ -7,6 +7,8 @@ obj-$(CONFIG_PCI)	+= pci.o
 obj-$(CONFIG_SOC_TX3927)	+= setup_tx3927.o irq_tx3927.o
 obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o setup_tx4927.o irq_tx4927.o
 obj-$(CONFIG_SOC_TX4938)	+= mem_tx4927.o setup_tx4938.o irq_tx4938.o
+obj-$(CONFIG_SOC_TX4939)	+= setup_tx4939.o irq_tx4939.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
+obj-$(CONFIG_SPI)		+= spi_eeprom.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c
index cbea1fd..ad2870d 100644
--- a/arch/mips/txx9/generic/irq_tx4927.c
+++ b/arch/mips/txx9/generic/irq_tx4927.c
@@ -30,8 +30,19 @@
 
 void __init tx4927_irq_init(void)
 {
+	int i;
+
 	mips_cpu_irq_init();
 	txx9_irq_init(TX4927_IRC_REG & 0xfffffffffULL);
 	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT,
 				handle_simple_irq);
+	/* raise priority for errors, timers, SIO */
+	txx9_irq_set_pri(TX4927_IR_ECCERR, 7);
+	txx9_irq_set_pri(TX4927_IR_WTOERR, 7);
+	txx9_irq_set_pri(TX4927_IR_PCIERR, 7);
+	txx9_irq_set_pri(TX4927_IR_PCIPME, 7);
+	for (i = 0; i < TX4927_NUM_IR_TMR; i++)
+		txx9_irq_set_pri(TX4927_IR_TMR(i), 6);
+	for (i = 0; i < TX4927_NUM_IR_SIO; i++)
+		txx9_irq_set_pri(TX4927_IR_SIO(i), 5);
 }
diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c
index 6eac684..025ae11 100644
--- a/arch/mips/txx9/generic/irq_tx4938.c
+++ b/arch/mips/txx9/generic/irq_tx4938.c
@@ -18,8 +18,19 @@
 
 void __init tx4938_irq_init(void)
 {
+	int i;
+
 	mips_cpu_irq_init();
 	txx9_irq_init(TX4938_IRC_REG & 0xfffffffffULL);
 	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT,
 				handle_simple_irq);
+	/* raise priority for errors, timers, SIO */
+	txx9_irq_set_pri(TX4938_IR_ECCERR, 7);
+	txx9_irq_set_pri(TX4938_IR_WTOERR, 7);
+	txx9_irq_set_pri(TX4938_IR_PCIERR, 7);
+	txx9_irq_set_pri(TX4938_IR_PCIPME, 7);
+	for (i = 0; i < TX4938_NUM_IR_TMR; i++)
+		txx9_irq_set_pri(TX4938_IR_TMR(i), 6);
+	for (i = 0; i < TX4938_NUM_IR_SIO; i++)
+		txx9_irq_set_pri(TX4938_IR_SIO(i), 5);
 }
diff --git a/arch/mips/txx9/generic/irq_tx4939.c b/arch/mips/txx9/generic/irq_tx4939.c
new file mode 100644
index 0000000..013213a8
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx4939.c
@@ -0,0 +1,215 @@
+/*
+ * TX4939 irq routines
+ * Based on linux/arch/mips/kernel/irq_txx9.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         ahennessy@mvista.com
+ *         source@mvista.com
+ * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+/*
+ * TX4939 defines 64 IRQs.
+ * Similer to irq_txx9.c but different register layouts.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <asm/irq_cpu.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx4939.h>
+
+/* IRCER : Int. Control Enable */
+#define TXx9_IRCER_ICE	0x00000001
+
+/* IRCR : Int. Control */
+#define TXx9_IRCR_LOW	0x00000000
+#define TXx9_IRCR_HIGH	0x00000001
+#define TXx9_IRCR_DOWN	0x00000002
+#define TXx9_IRCR_UP	0x00000003
+#define TXx9_IRCR_EDGE(cr)	((cr) & 0x00000002)
+
+/* IRSCR : Int. Status Control */
+#define TXx9_IRSCR_EIClrE	0x00000100
+#define TXx9_IRSCR_EIClr_MASK	0x0000000f
+
+/* IRCSR : Int. Current Status */
+#define TXx9_IRCSR_IF	0x00010000
+
+#define irc_dlevel	0
+#define irc_elevel	1
+
+static struct {
+	unsigned char level;
+	unsigned char mode;
+} tx4939irq[TX4939_NUM_IR] __read_mostly;
+
+static void tx4939_irq_unmask(unsigned int irq)
+{
+	unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+	u32 __iomem *lvlp;
+	int ofs;
+	if (irq_nr < 32) {
+		irq_nr--;
+		lvlp = &tx4939_ircptr->lvl[(irq_nr % 16) / 2].r;
+	} else {
+		irq_nr -= 32;
+		lvlp = &tx4939_ircptr->lvl[8 + (irq_nr % 16) / 2].r;
+	}
+	ofs = (irq_nr & 16) + (irq_nr & 1) * 8;
+	__raw_writel((__raw_readl(lvlp) & ~(0xff << ofs))
+		     | (tx4939irq[irq_nr].level << ofs),
+		     lvlp);
+}
+
+static inline void tx4939_irq_mask(unsigned int irq)
+{
+	unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+	u32 __iomem *lvlp;
+	int ofs;
+	if (irq_nr < 32) {
+		irq_nr--;
+		lvlp = &tx4939_ircptr->lvl[(irq_nr % 16) / 2].r;
+	} else {
+		irq_nr -= 32;
+		lvlp = &tx4939_ircptr->lvl[8 + (irq_nr % 16) / 2].r;
+	}
+	ofs = (irq_nr & 16) + (irq_nr & 1) * 8;
+	__raw_writel((__raw_readl(lvlp) & ~(0xff << ofs))
+		     | (irc_dlevel << ofs),
+		     lvlp);
+	mmiowb();
+}
+
+static void tx4939_irq_mask_ack(unsigned int irq)
+{
+	unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+
+	tx4939_irq_mask(irq);
+	if (TXx9_IRCR_EDGE(tx4939irq[irq_nr].mode)) {
+		irq_nr--;
+		/* clear edge detection */
+		__raw_writel((TXx9_IRSCR_EIClrE | (irq_nr & 0xf))
+			     << (irq_nr & 0x10),
+			     &tx4939_ircptr->edc.r);
+	}
+}
+
+static int tx4939_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+	u32 cr;
+	u32 __iomem *crp;
+	int ofs;
+	int mode;
+
+	if (flow_type & IRQF_TRIGGER_PROBE)
+		return 0;
+	switch (flow_type & IRQF_TRIGGER_MASK) {
+	case IRQF_TRIGGER_RISING:
+		mode = TXx9_IRCR_UP;
+		break;
+	case IRQF_TRIGGER_FALLING:
+		mode = TXx9_IRCR_DOWN;
+		break;
+	case IRQF_TRIGGER_HIGH:
+		mode = TXx9_IRCR_HIGH;
+		break;
+	case IRQF_TRIGGER_LOW:
+		mode = TXx9_IRCR_LOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (irq_nr < 32) {
+		irq_nr--;
+		crp = &tx4939_ircptr->dm[(irq_nr & 8) >> 3].r;
+	} else {
+		irq_nr -= 32;
+		crp = &tx4939_ircptr->dm2[((irq_nr & 8) >> 3)].r;
+	}
+	ofs = (((irq_nr & 16) >> 1) | (irq_nr & (8 - 1))) * 2;
+	cr = __raw_readl(crp);
+	cr &= ~(0x3 << ofs);
+	cr |= (mode & 0x3) << ofs;
+	__raw_writel(cr, crp);
+	tx4939irq[irq_nr].mode = mode;
+	return 0;
+}
+
+static struct irq_chip tx4939_irq_chip = {
+	.name		= "TX4939",
+	.ack		= tx4939_irq_mask_ack,
+	.mask		= tx4939_irq_mask,
+	.mask_ack	= tx4939_irq_mask_ack,
+	.unmask		= tx4939_irq_unmask,
+	.set_type	= tx4939_irq_set_type,
+};
+
+static int tx4939_irq_set_pri(int irc_irq, int new_pri)
+{
+	int old_pri;
+
+	if ((unsigned int)irc_irq >= TX4939_NUM_IR)
+		return 0;
+	old_pri = tx4939irq[irc_irq].level;
+	tx4939irq[irc_irq].level = new_pri;
+	return old_pri;
+}
+
+void __init tx4939_irq_init(void)
+{
+	int i;
+
+	mips_cpu_irq_init();
+	/* disable interrupt control */
+	__raw_writel(0, &tx4939_ircptr->den.r);
+	__raw_writel(0, &tx4939_ircptr->maskint.r);
+	__raw_writel(0, &tx4939_ircptr->maskext.r);
+	/* irq_base + 0 is not used */
+	for (i = 1; i < TX4939_NUM_IR; i++) {
+		tx4939irq[i].level = 4; /* middle level */
+		tx4939irq[i].mode = TXx9_IRCR_LOW;
+		set_irq_chip_and_handler(TXX9_IRQ_BASE + i,
+					 &tx4939_irq_chip, handle_level_irq);
+	}
+
+	/* mask all IRC interrupts */
+	__raw_writel(0, &tx4939_ircptr->msk.r);
+	for (i = 0; i < 16; i++)
+		__raw_writel(0, &tx4939_ircptr->lvl[i].r);
+	/* setup IRC interrupt mode (Low Active) */
+	for (i = 0; i < 2; i++)
+		__raw_writel(0, &tx4939_ircptr->dm[i].r);
+	for (i = 0; i < 2; i++)
+		__raw_writel(0, &tx4939_ircptr->dm2[i].r);
+	/* enable interrupt control */
+	__raw_writel(TXx9_IRCER_ICE, &tx4939_ircptr->den.r);
+	__raw_writel(irc_elevel, &tx4939_ircptr->msk.r);
+
+	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4939_IRC_INT,
+				handle_simple_irq);
+
+	/* raise priority for errors, timers, sio */
+	tx4939_irq_set_pri(TX4939_IR_WTOERR, 7);
+	tx4939_irq_set_pri(TX4939_IR_PCIERR, 7);
+	tx4939_irq_set_pri(TX4939_IR_PCIPME, 7);
+	for (i = 0; i < TX4939_NUM_IR_TMR; i++)
+		tx4939_irq_set_pri(TX4939_IR_TMR(i), 6);
+	for (i = 0; i < TX4939_NUM_IR_SIO; i++)
+		tx4939_irq_set_pri(TX4939_IR_SIO(i), 5);
+}
+
+int tx4939_irq(void)
+{
+	u32 csr = __raw_readl(&tx4939_ircptr->cs.r);
+
+	if (likely(!(csr & TXx9_IRCSR_IF)))
+		return TXX9_IRQ_BASE + (csr & (TX4939_NUM_IR - 1));
+	return -1;
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index fe6bee0..5526375 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -22,11 +22,16 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/mtd/physmap.h>
+#include <linux/leds.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
 #include <asm/reboot.h>
+#include <asm/r4kcache.h>
+#include <asm/sections.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
+#include <asm/txx9tmr.h>
 #ifdef CONFIG_CPU_TX49XX
 #include <asm/txx9/tx4938.h>
 #endif
@@ -67,7 +72,12 @@ unsigned int txx9_master_clock;
 unsigned int txx9_cpu_clock;
 unsigned int txx9_gbus_clock;
 
+#ifdef CONFIG_CPU_TX39XX
+/* don't enable by default - see errata */
+int txx9_ccfg_toeon __initdata;
+#else
 int txx9_ccfg_toeon __initdata = 1;
+#endif
 
 /* Minimum CLK support */
 
@@ -119,39 +129,232 @@ int irq_to_gpio(unsigned irq)
 EXPORT_SYMBOL(irq_to_gpio);
 #endif
 
-extern struct txx9_board_vec jmr3927_vec;
-extern struct txx9_board_vec rbtx4927_vec;
-extern struct txx9_board_vec rbtx4937_vec;
-extern struct txx9_board_vec rbtx4938_vec;
+#define BOARD_VEC(board)	extern struct txx9_board_vec board;
+#include <asm/txx9/boards.h>
+#undef BOARD_VEC
 
 struct txx9_board_vec *txx9_board_vec __initdata;
 static char txx9_system_type[32];
 
-void __init prom_init_cmdline(void)
+static struct txx9_board_vec *board_vecs[] __initdata = {
+#define BOARD_VEC(board)	&board,
+#include <asm/txx9/boards.h>
+#undef BOARD_VEC
+};
+
+static struct txx9_board_vec *__init find_board_byname(const char *name)
+{
+	int i;
+
+	/* search board_vecs table */
+	for (i = 0; i < ARRAY_SIZE(board_vecs); i++) {
+		if (strstr(board_vecs[i]->system, name))
+			return board_vecs[i];
+	}
+	return NULL;
+}
+
+static void __init prom_init_cmdline(void)
 {
 	int argc = (int)fw_arg0;
-	char **argv = (char **)fw_arg1;
+	int *argv32 = (int *)fw_arg1;
 	int i;			/* Always ignore the "-c" at argv[0] */
-#ifdef CONFIG_64BIT
-	char *fixed_argv[32];
-	for (i = 0; i < argc; i++)
-		fixed_argv[i] = (char *)(long)(*((__s32 *)argv + i));
-	argv = fixed_argv;
-#endif
+	char builtin[CL_SIZE];
 
 	/* ignore all built-in args if any f/w args given */
-	if (argc > 1)
-		*arcs_cmdline = '\0';
+	/*
+	 * But if built-in strings was started with '+', append them
+	 * to command line args.  If built-in was started with '-',
+	 * ignore all f/w args.
+	 */
+	builtin[0] = '\0';
+	if (arcs_cmdline[0] == '+')
+		strcpy(builtin, arcs_cmdline + 1);
+	else if (arcs_cmdline[0] == '-') {
+		strcpy(builtin, arcs_cmdline + 1);
+		argc = 0;
+	} else if (argc <= 1)
+		strcpy(builtin, arcs_cmdline);
+	arcs_cmdline[0] = '\0';
 
 	for (i = 1; i < argc; i++) {
+		char *str = (char *)(long)argv32[i];
 		if (i != 1)
 			strcat(arcs_cmdline, " ");
-		strcat(arcs_cmdline, argv[i]);
+		if (strchr(str, ' ')) {
+			strcat(arcs_cmdline, "\"");
+			strcat(arcs_cmdline, str);
+			strcat(arcs_cmdline, "\"");
+		} else
+			strcat(arcs_cmdline, str);
+	}
+	/* append saved builtin args */
+	if (builtin[0]) {
+		if (arcs_cmdline[0])
+			strcat(arcs_cmdline, " ");
+		strcat(arcs_cmdline, builtin);
 	}
 }
 
-void __init prom_init(void)
+static int txx9_ic_disable __initdata;
+static int txx9_dc_disable __initdata;
+
+#if defined(CONFIG_CPU_TX49XX)
+/* flush all cache on very early stage (before 4k_cache_init) */
+static void __init early_flush_dcache(void)
 {
+	unsigned int conf = read_c0_config();
+	unsigned int dc_size = 1 << (12 + ((conf & CONF_DC) >> 6));
+	unsigned int linesz = 32;
+	unsigned long addr, end;
+
+	end = INDEX_BASE + dc_size / 4;
+	/* 4way, waybit=0 */
+	for (addr = INDEX_BASE; addr < end; addr += linesz) {
+		cache_op(Index_Writeback_Inv_D, addr | 0);
+		cache_op(Index_Writeback_Inv_D, addr | 1);
+		cache_op(Index_Writeback_Inv_D, addr | 2);
+		cache_op(Index_Writeback_Inv_D, addr | 3);
+	}
+}
+
+static void __init txx9_cache_fixup(void)
+{
+	unsigned int conf;
+
+	conf = read_c0_config();
+	/* flush and disable */
+	if (txx9_ic_disable) {
+		conf |= TX49_CONF_IC;
+		write_c0_config(conf);
+	}
+	if (txx9_dc_disable) {
+		early_flush_dcache();
+		conf |= TX49_CONF_DC;
+		write_c0_config(conf);
+	}
+
+	/* enable cache */
+	conf = read_c0_config();
+	if (!txx9_ic_disable)
+		conf &= ~TX49_CONF_IC;
+	if (!txx9_dc_disable)
+		conf &= ~TX49_CONF_DC;
+	write_c0_config(conf);
+
+	if (conf & TX49_CONF_IC)
+		pr_info("TX49XX I-Cache disabled.\n");
+	if (conf & TX49_CONF_DC)
+		pr_info("TX49XX D-Cache disabled.\n");
+}
+#elif defined(CONFIG_CPU_TX39XX)
+/* flush all cache on very early stage (before tx39_cache_init) */
+static void __init early_flush_dcache(void)
+{
+	unsigned int conf = read_c0_config();
+	unsigned int dc_size = 1 << (10 + ((conf & TX39_CONF_DCS_MASK) >>
+					   TX39_CONF_DCS_SHIFT));
+	unsigned int linesz = 16;
+	unsigned long addr, end;
+
+	end = INDEX_BASE + dc_size / 2;
+	/* 2way, waybit=0 */
+	for (addr = INDEX_BASE; addr < end; addr += linesz) {
+		cache_op(Index_Writeback_Inv_D, addr | 0);
+		cache_op(Index_Writeback_Inv_D, addr | 1);
+	}
+}
+
+static void __init txx9_cache_fixup(void)
+{
+	unsigned int conf;
+
+	conf = read_c0_config();
+	/* flush and disable */
+	if (txx9_ic_disable) {
+		conf &= ~TX39_CONF_ICE;
+		write_c0_config(conf);
+	}
+	if (txx9_dc_disable) {
+		early_flush_dcache();
+		conf &= ~TX39_CONF_DCE;
+		write_c0_config(conf);
+	}
+
+	/* enable cache */
+	conf = read_c0_config();
+	if (!txx9_ic_disable)
+		conf |= TX39_CONF_ICE;
+	if (!txx9_dc_disable)
+		conf |= TX39_CONF_DCE;
+	write_c0_config(conf);
+
+	if (!(conf & TX39_CONF_ICE))
+		pr_info("TX39XX I-Cache disabled.\n");
+	if (!(conf & TX39_CONF_DCE))
+		pr_info("TX39XX D-Cache disabled.\n");
+}
+#else
+static inline void txx9_cache_fixup(void)
+{
+}
+#endif
+
+static void __init preprocess_cmdline(void)
+{
+	char cmdline[CL_SIZE];
+	char *s;
+
+	strcpy(cmdline, arcs_cmdline);
+	s = cmdline;
+	arcs_cmdline[0] = '\0';
+	while (s && *s) {
+		char *str = strsep(&s, " ");
+		if (strncmp(str, "board=", 6) == 0) {
+			txx9_board_vec = find_board_byname(str + 6);
+			continue;
+		} else if (strncmp(str, "masterclk=", 10) == 0) {
+			unsigned long val;
+			if (strict_strtoul(str + 10, 10, &val) == 0)
+				txx9_master_clock = val;
+			continue;
+		} else if (strcmp(str, "icdisable") == 0) {
+			txx9_ic_disable = 1;
+			continue;
+		} else if (strcmp(str, "dcdisable") == 0) {
+			txx9_dc_disable = 1;
+			continue;
+		} else if (strcmp(str, "toeoff") == 0) {
+			txx9_ccfg_toeon = 0;
+			continue;
+		} else if (strcmp(str, "toeon") == 0) {
+			txx9_ccfg_toeon = 1;
+			continue;
+		}
+		if (arcs_cmdline[0])
+			strcat(arcs_cmdline, " ");
+		strcat(arcs_cmdline, str);
+	}
+
+	txx9_cache_fixup();
+}
+
+static void __init select_board(void)
+{
+	const char *envstr;
+
+	/* first, determine by "board=" argument in preprocess_cmdline() */
+	if (txx9_board_vec)
+		return;
+	/* next, determine by "board" envvar */
+	envstr = prom_getenv("board");
+	if (envstr) {
+		txx9_board_vec = find_board_byname(envstr);
+		if (txx9_board_vec)
+			return;
+	}
+
+	/* select "default" board */
 #ifdef CONFIG_CPU_TX39XX
 	txx9_board_vec = &jmr3927_vec;
 #endif
@@ -170,8 +373,20 @@ void __init prom_init(void)
 		txx9_board_vec = &rbtx4938_vec;
 		break;
 #endif
+#ifdef CONFIG_TOSHIBA_RBTX4939
+	case 0x4939:
+		txx9_board_vec = &rbtx4939_vec;
+		break;
+#endif
 	}
 #endif
+}
+
+void __init prom_init(void)
+{
+	prom_init_cmdline();
+	preprocess_cmdline();
+	select_board();
 
 	strcpy(txx9_system_type, txx9_board_vec->system);
 
@@ -180,6 +395,11 @@ void __init prom_init(void)
 
 void __init prom_free_prom_memory(void)
 {
+	unsigned long saddr = PAGE_SIZE;
+	unsigned long eaddr = __pa_symbol(&_text);
+
+	if (saddr < eaddr)
+		free_init_pages("prom memory", saddr, eaddr);
 }
 
 const char *get_system_type(void)
@@ -192,6 +412,21 @@ char * __init prom_getcmdline(void)
 	return &(arcs_cmdline[0]);
 }
 
+const char *__init prom_getenv(const char *name)
+{
+	const s32 *str = (const s32 *)fw_arg2;
+
+	if (!str)
+		return NULL;
+	/* YAMON style ("name", "value" pairs) */
+	while (str[0] && str[1]) {
+		if (!strcmp((const char *)(unsigned long)str[0], name))
+			return (const char *)(unsigned long)str[1];
+		str += 2;
+	}
+	return NULL;
+}
+
 static void __noreturn txx9_machine_halt(void)
 {
 	local_irq_disable();
@@ -222,6 +457,20 @@ void __init txx9_wdt_init(unsigned long base)
 	platform_device_register_simple("txx9wdt", -1, &res, 1);
 }
 
+void txx9_wdt_now(unsigned long base)
+{
+	struct txx9_tmr_reg __iomem *tmrptr =
+		ioremap(base, sizeof(struct txx9_tmr_reg));
+	/* disable watch dog timer */
+	__raw_writel(TXx9_TMWTMR_WDIS | TXx9_TMWTMR_TWC, &tmrptr->wtmr);
+	__raw_writel(0, &tmrptr->tcr);
+	/* kick watchdog */
+	__raw_writel(TXx9_TMWTMR_TWIE, &tmrptr->wtmr);
+	__raw_writel(1, &tmrptr->cpra); /* immediate */
+	__raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG,
+		     &tmrptr->tcr);
+}
+
 /* SPI support */
 void __init txx9_spi_init(int busid, unsigned long base, int irq)
 {
@@ -372,3 +621,153 @@ static unsigned long __swizzle_addr_none(unsigned long port)
 unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none;
 EXPORT_SYMBOL(__swizzle_addr_b);
 #endif
+
+void __init txx9_physmap_flash_init(int no, unsigned long addr,
+				    unsigned long size,
+				    const struct physmap_flash_data *pdata)
+{
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	struct resource res = {
+		.start = addr,
+		.end = addr + size - 1,
+		.flags = IORESOURCE_MEM,
+	};
+	struct platform_device *pdev;
+#ifdef CONFIG_MTD_PARTITIONS
+	static struct mtd_partition parts[2];
+	struct physmap_flash_data pdata_part;
+
+	/* If this area contained boot area, make separate partition */
+	if (pdata->nr_parts == 0 && !pdata->parts &&
+	    addr < 0x1fc00000 && addr + size > 0x1fc00000 &&
+	    !parts[0].name) {
+		parts[0].name = "boot";
+		parts[0].offset = 0x1fc00000 - addr;
+		parts[0].size = addr + size - 0x1fc00000;
+		parts[1].name = "user";
+		parts[1].offset = 0;
+		parts[1].size = 0x1fc00000 - addr;
+		pdata_part = *pdata;
+		pdata_part.nr_parts = ARRAY_SIZE(parts);
+		pdata_part.parts = parts;
+		pdata = &pdata_part;
+	}
+#endif
+	pdev = platform_device_alloc("physmap-flash", no);
+	if (!pdev ||
+	    platform_device_add_resources(pdev, &res, 1) ||
+	    platform_device_add_data(pdev, pdata, sizeof(*pdata)) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+#endif
+}
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static DEFINE_SPINLOCK(txx9_iocled_lock);
+
+#define TXX9_IOCLED_MAXLEDS 8
+
+struct txx9_iocled_data {
+	struct gpio_chip chip;
+	u8 cur_val;
+	void __iomem *mmioaddr;
+	struct gpio_led_platform_data pdata;
+	struct gpio_led leds[TXX9_IOCLED_MAXLEDS];
+	char names[TXX9_IOCLED_MAXLEDS][32];
+};
+
+static int txx9_iocled_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct txx9_iocled_data *data =
+		container_of(chip, struct txx9_iocled_data, chip);
+	return data->cur_val & (1 << offset);
+}
+
+static void txx9_iocled_set(struct gpio_chip *chip, unsigned int offset,
+			    int value)
+{
+	struct txx9_iocled_data *data =
+		container_of(chip, struct txx9_iocled_data, chip);
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_iocled_lock, flags);
+	if (value)
+		data->cur_val |= 1 << offset;
+	else
+		data->cur_val &= ~(1 << offset);
+	writeb(data->cur_val, data->mmioaddr);
+	mmiowb();
+	spin_unlock_irqrestore(&txx9_iocled_lock, flags);
+}
+
+static int txx9_iocled_dir_in(struct gpio_chip *chip, unsigned int offset)
+{
+	return 0;
+}
+
+static int txx9_iocled_dir_out(struct gpio_chip *chip, unsigned int offset,
+			       int value)
+{
+	txx9_iocled_set(chip, offset, value);
+	return 0;
+}
+
+void __init txx9_iocled_init(unsigned long baseaddr,
+			     int basenum, unsigned int num, int lowactive,
+			     const char *color, char **deftriggers)
+{
+	struct txx9_iocled_data *iocled;
+	struct platform_device *pdev;
+	int i;
+	static char *default_triggers[] __initdata = {
+		"heartbeat",
+		"ide-disk",
+		"nand-disk",
+		NULL,
+	};
+
+	if (!deftriggers)
+		deftriggers = default_triggers;
+	iocled = kzalloc(sizeof(*iocled), GFP_KERNEL);
+	if (!iocled)
+		return;
+	iocled->mmioaddr = ioremap(baseaddr, 1);
+	if (!iocled->mmioaddr)
+		return;
+	iocled->chip.get = txx9_iocled_get;
+	iocled->chip.set = txx9_iocled_set;
+	iocled->chip.direction_input = txx9_iocled_dir_in;
+	iocled->chip.direction_output = txx9_iocled_dir_out;
+	iocled->chip.label = "iocled";
+	iocled->chip.base = basenum;
+	iocled->chip.ngpio = num;
+	if (gpiochip_add(&iocled->chip))
+		return;
+	if (basenum < 0)
+		basenum = iocled->chip.base;
+
+	pdev = platform_device_alloc("leds-gpio", basenum);
+	if (!pdev)
+		return;
+	iocled->pdata.num_leds = num;
+	iocled->pdata.leds = iocled->leds;
+	for (i = 0; i < num; i++) {
+		struct gpio_led *led = &iocled->leds[i];
+		snprintf(iocled->names[i], sizeof(iocled->names[i]),
+			 "iocled:%s:%u", color, i);
+		led->name = iocled->names[i];
+		led->gpio = basenum + i;
+		led->active_low = lowactive;
+		if (deftriggers && *deftriggers)
+			led->default_trigger = *deftriggers++;
+	}
+	pdev->dev.platform_data = &iocled->pdata;
+	if (platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+#else /* CONFIG_LEDS_GPIO */
+void __init txx9_iocled_init(unsigned long baseaddr,
+			     int basenum, unsigned int num, int lowactive,
+			     const char *color, char **deftriggers)
+{
+}
+#endif /* CONFIG_LEDS_GPIO */
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
index 7bd963d..9505d58 100644
--- a/arch/mips/txx9/generic/setup_tx3927.c
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/param.h>
 #include <linux/io.h>
+#include <linux/mtd/physmap.h>
 #include <asm/mipsregs.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -32,11 +33,6 @@ void __init tx3927_setup(void)
 	int i;
 	unsigned int conf;
 
-	/* don't enable - see errata */
-	txx9_ccfg_toeon = 0;
-	if (strstr(prom_getcmdline(), "toeon") != NULL)
-		txx9_ccfg_toeon = 1;
-
 	txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
 			  TX3927_REG_SIZE);
 
@@ -99,16 +95,14 @@ void __init tx3927_setup(void)
 	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
 
 	conf = read_c0_conf();
-	if (!(conf & TX39_CONF_ICE))
-		printk(KERN_INFO "TX3927 I-Cache disabled.\n");
-	if (!(conf & TX39_CONF_DCE))
-		printk(KERN_INFO "TX3927 D-Cache disabled.\n");
-	else if (!(conf & TX39_CONF_WBON))
-		printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
-	else if (!(conf & TX39_CONF_CWFON))
-		printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
-	else
-		printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+	if (conf & TX39_CONF_DCE) {
+		if (!(conf & TX39_CONF_WBON))
+			pr_info("TX3927 D-Cache WriteThrough.\n");
+		else if (!(conf & TX39_CONF_CWFON))
+			pr_info("TX3927 D-Cache WriteBack.\n");
+		else
+			pr_info("TX3927 D-Cache WriteBack (CWF) .\n");
+	}
 }
 
 void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
@@ -128,3 +122,16 @@ void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
 			      TXX9_IRQ_BASE + TX3927_IR_SIO(i),
 			      i, sclk, (1 << i) & cts_mask);
 }
+
+void __init tx3927_mtd_init(int ch)
+{
+	struct physmap_flash_data pdata = {
+		.width = TX3927_ROMC_WIDTH(ch) / 8,
+	};
+	unsigned long start = txx9_ce_res[ch].start;
+	unsigned long size = txx9_ce_res[ch].end - start + 1;
+
+	if (!(tx3927_romcptr->cr[ch] & 0x8))
+		return;	/* disabled */
+	txx9_physmap_flash_init(ch, start, size, &pdata);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index f80d4b7..914e93c 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -14,6 +14,10 @@
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/param.h>
+#include <linux/ptrace.h>
+#include <linux/mtd/physmap.h>
+#include <asm/reboot.h>
+#include <asm/traps.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
 #include <asm/txx9pio.h>
@@ -22,6 +26,10 @@
 
 static void __init tx4927_wdr_init(void)
 {
+	/* report watchdog reset status */
+	if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST)
+		pr_warning("Watchdog reset detected at 0x%lx\n",
+			   read_c0_errorepc());
 	/* clear WatchDogReset (W1C) */
 	tx4927_ccfg_set(TX4927_CCFG_WDRST);
 	/* do reset on watchdog */
@@ -33,6 +41,47 @@ void __init tx4927_wdt_init(void)
 	txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
 }
 
+static void tx4927_machine_restart(char *command)
+{
+	local_irq_disable();
+	pr_emerg("Rebooting (with %s watchdog reset)...\n",
+		 (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDREXEN) ?
+		 "external" : "internal");
+	/* clear watchdog status */
+	tx4927_ccfg_set(TX4927_CCFG_WDRST);	/* W1C */
+	txx9_wdt_now(TX4927_TMR_REG(2) & 0xfffffffffULL);
+	while (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST))
+		;
+	mdelay(10);
+	if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDREXEN) {
+		pr_emerg("Rebooting (with internal watchdog reset)...\n");
+		/* External WDRST failed.  Do internal watchdog reset */
+		tx4927_ccfg_clear(TX4927_CCFG_WDREXEN);
+	}
+	/* fallback */
+	(*_machine_halt)();
+}
+
+void show_registers(struct pt_regs *regs);
+static int tx4927_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	int data = regs->cp0_cause & 4;
+	console_verbose();
+	pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc);
+	pr_err("ccfg:%llx, toea:%llx\n",
+	       (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg),
+	       (unsigned long long)____raw_readq(&tx4927_ccfgptr->toea));
+#ifdef CONFIG_PCI
+	tx4927_report_pcic_status();
+#endif
+	show_registers(regs);
+	panic("BusError!");
+}
+static void __init tx4927_be_init(void)
+{
+	board_be_handler = tx4927_be_handler;
+}
+
 static struct resource tx4927_sdram_resource[4];
 
 void __init tx4927_setup(void)
@@ -44,6 +93,7 @@ void __init tx4927_setup(void)
 
 	txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
 			  TX4927_REG_SIZE);
+	set_c0_config(TX49_CONF_CWFON);
 
 	/* SDRAMC,EBUSC are configured by PROM */
 	for (i = 0; i < 8; i++) {
@@ -167,6 +217,9 @@ void __init tx4927_setup(void)
 	txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
 	__raw_writel(0, &tx4927_pioptr->maskcpu);
 	__raw_writel(0, &tx4927_pioptr->maskext);
+
+	_machine_restart = tx4927_machine_restart;
+	board_be_init = tx4927_be_init;
 }
 
 void __init tx4927_time_init(unsigned int tmrnr)
@@ -186,3 +239,47 @@ void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
 			      TXX9_IRQ_BASE + TX4927_IR_SIO(i),
 			      i, sclk, (1 << i) & cts_mask);
 }
+
+void __init tx4927_mtd_init(int ch)
+{
+	struct physmap_flash_data pdata = {
+		.width = TX4927_EBUSC_WIDTH(ch) / 8,
+	};
+	unsigned long start = txx9_ce_res[ch].start;
+	unsigned long size = txx9_ce_res[ch].end - start + 1;
+
+	if (!(TX4927_EBUSC_CR(ch) & 0x8))
+		return;	/* disabled */
+	txx9_physmap_flash_init(ch, start, size, &pdata);
+}
+
+static void __init tx4927_stop_unused_modules(void)
+{
+	__u64 pcfg, rst = 0, ckd = 0;
+	char buf[128];
+
+	buf[0] = '\0';
+	local_irq_disable();
+	pcfg = ____raw_readq(&tx4927_ccfgptr->pcfg);
+	if (!(pcfg & TX4927_PCFG_SEL2)) {
+		rst |= TX4927_CLKCTR_ACLRST;
+		ckd |= TX4927_CLKCTR_ACLCKD;
+		strcat(buf, " ACLC");
+	}
+	if (rst | ckd) {
+		txx9_set64(&tx4927_ccfgptr->clkctr, rst);
+		txx9_set64(&tx4927_ccfgptr->clkctr, ckd);
+	}
+	local_irq_enable();
+	if (buf[0])
+		pr_info("%s: stop%s\n", txx9_pcode_str, buf);
+}
+
+static int __init tx4927_late_init(void)
+{
+	if (txx9_pcode != 0x4927)
+		return -ENODEV;
+	tx4927_stop_unused_modules();
+	return 0;
+}
+late_initcall(tx4927_late_init);
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index f3040b9..25819ff 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -14,6 +14,11 @@
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/param.h>
+#include <linux/ptrace.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/reboot.h>
+#include <asm/traps.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
 #include <asm/txx9pio.h>
@@ -22,6 +27,10 @@
 
 static void __init tx4938_wdr_init(void)
 {
+	/* report watchdog reset status */
+	if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDRST)
+		pr_warning("Watchdog reset detected at 0x%lx\n",
+			   read_c0_errorepc());
 	/* clear WatchDogReset (W1C) */
 	tx4938_ccfg_set(TX4938_CCFG_WDRST);
 	/* do reset on watchdog */
@@ -33,6 +42,47 @@ void __init tx4938_wdt_init(void)
 	txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
 }
 
+static void tx4938_machine_restart(char *command)
+{
+	local_irq_disable();
+	pr_emerg("Rebooting (with %s watchdog reset)...\n",
+		 (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDREXEN) ?
+		 "external" : "internal");
+	/* clear watchdog status */
+	tx4938_ccfg_set(TX4938_CCFG_WDRST);	/* W1C */
+	txx9_wdt_now(TX4938_TMR_REG(2) & 0xfffffffffULL);
+	while (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDRST))
+		;
+	mdelay(10);
+	if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDREXEN) {
+		pr_emerg("Rebooting (with internal watchdog reset)...\n");
+		/* External WDRST failed.  Do internal watchdog reset */
+		tx4938_ccfg_clear(TX4938_CCFG_WDREXEN);
+	}
+	/* fallback */
+	(*_machine_halt)();
+}
+
+void show_registers(struct pt_regs *regs);
+static int tx4938_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	int data = regs->cp0_cause & 4;
+	console_verbose();
+	pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc);
+	pr_err("ccfg:%llx, toea:%llx\n",
+	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg),
+	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->toea));
+#ifdef CONFIG_PCI
+	tx4927_report_pcic_status();
+#endif
+	show_registers(regs);
+	panic("BusError!");
+}
+static void __init tx4938_be_init(void)
+{
+	board_be_handler = tx4938_be_handler;
+}
+
 static struct resource tx4938_sdram_resource[4];
 static struct resource tx4938_sram_resource;
 
@@ -47,6 +97,7 @@ void __init tx4938_setup(void)
 
 	txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
 			  TX4938_REG_SIZE);
+	set_c0_config(TX49_CONF_CWFON);
 
 	/* SDRAMC,EBUSC are configured by PROM */
 	for (i = 0; i < 8; i++) {
@@ -227,6 +278,9 @@ void __init tx4938_setup(void)
 				   TX4938_CLKCTR_ETH1CKD);
 		}
 	}
+
+	_machine_restart = tx4938_machine_restart;
+	board_be_init = tx4938_be_init;
 }
 
 void __init tx4938_time_init(unsigned int tmrnr)
@@ -268,3 +322,118 @@ void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
 	if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
 		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
 }
+
+void __init tx4938_mtd_init(int ch)
+{
+	struct physmap_flash_data pdata = {
+		.width = TX4938_EBUSC_WIDTH(ch) / 8,
+	};
+	unsigned long start = txx9_ce_res[ch].start;
+	unsigned long size = txx9_ce_res[ch].end - start + 1;
+
+	if (!(TX4938_EBUSC_CR(ch) & 0x8))
+		return;	/* disabled */
+	txx9_physmap_flash_init(ch, start, size, &pdata);
+}
+
+void __init tx4938_ata_init(unsigned int irq, unsigned int shift, int tune)
+{
+	struct platform_device *pdev;
+	struct resource res[] = {
+		{
+			/* .start and .end are filled in later */
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	struct tx4938ide_platform_info pdata = {
+		.ioport_shift = shift,
+		/*
+		 * The IDE driver should not change bus timings if other ISA
+		 * devices existed.
+		 */
+		.gbus_clock = tune ? txx9_gbus_clock : 0,
+	};
+	u64 ebccr;
+	int i;
+
+	if ((__raw_readq(&tx4938_ccfgptr->pcfg) &
+	     (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL))
+	    != TX4938_PCFG_ATA_SEL)
+		return;
+	for (i = 0; i < 8; i++) {
+		/* check EBCCRn.ISA, EBCCRn.BSZ, EBCCRn.ME */
+		ebccr = __raw_readq(&tx4938_ebuscptr->cr[i]);
+		if ((ebccr & 0x00f00008) == 0x00e00008)
+			break;
+	}
+	if (i == 8)
+		return;
+	pdata.ebus_ch = i;
+	res[0].start = ((ebccr >> 48) << 20) + 0x10000;
+	res[0].end = res[0].start + 0x20000 - 1;
+	pdev = platform_device_alloc("tx4938ide", -1);
+	if (!pdev ||
+	    platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) ||
+	    platform_device_add_data(pdev, &pdata, sizeof(pdata)) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
+static void __init tx4938_stop_unused_modules(void)
+{
+	__u64 pcfg, rst = 0, ckd = 0;
+	char buf[128];
+
+	buf[0] = '\0';
+	local_irq_disable();
+	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+	switch (txx9_pcode) {
+	case 0x4937:
+		if (!(pcfg & TX4938_PCFG_SEL2)) {
+			rst |= TX4938_CLKCTR_ACLRST;
+			ckd |= TX4938_CLKCTR_ACLCKD;
+			strcat(buf, " ACLC");
+		}
+		break;
+	case 0x4938:
+		if (!(pcfg & TX4938_PCFG_SEL2) ||
+		    (pcfg & TX4938_PCFG_ETH0_SEL)) {
+			rst |= TX4938_CLKCTR_ACLRST;
+			ckd |= TX4938_CLKCTR_ACLCKD;
+			strcat(buf, " ACLC");
+		}
+		if ((pcfg &
+		     (TX4938_PCFG_ATA_SEL | TX4938_PCFG_ISA_SEL |
+		      TX4938_PCFG_NDF_SEL))
+		    != TX4938_PCFG_NDF_SEL) {
+			rst |= TX4938_CLKCTR_NDFRST;
+			ckd |= TX4938_CLKCTR_NDFCKD;
+			strcat(buf, " NDFMC");
+		}
+		if (!(pcfg & TX4938_PCFG_SPI_SEL)) {
+			rst |= TX4938_CLKCTR_SPIRST;
+			ckd |= TX4938_CLKCTR_SPICKD;
+			strcat(buf, " SPI");
+		}
+		break;
+	}
+	if (rst | ckd) {
+		txx9_set64(&tx4938_ccfgptr->clkctr, rst);
+		txx9_set64(&tx4938_ccfgptr->clkctr, ckd);
+	}
+	local_irq_enable();
+	if (buf[0])
+		pr_info("%s: stop%s\n", txx9_pcode_str, buf);
+}
+
+static int __init tx4938_late_init(void)
+{
+	if (txx9_pcode != 0x4937 && txx9_pcode != 0x4938)
+		return -ENODEV;
+	tx4938_stop_unused_modules();
+	return 0;
+}
+late_initcall(tx4938_late_init);
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
new file mode 100644
index 0000000..6c0049a
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -0,0 +1,506 @@
+/*
+ * TX4939 setup routines
+ * Based on linux/arch/mips/txx9/generic/setup_tx4938.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/notifier.h>
+#include <linux/sysdev.h>
+#include <linux/ethtool.h>
+#include <linux/param.h>
+#include <linux/ptrace.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/traps.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4939.h>
+
+static void __init tx4939_wdr_init(void)
+{
+	/* report watchdog reset status */
+	if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDRST)
+		pr_warning("Watchdog reset detected at 0x%lx\n",
+			   read_c0_errorepc());
+	/* clear WatchDogReset (W1C) */
+	tx4939_ccfg_set(TX4939_CCFG_WDRST);
+	/* do reset on watchdog */
+	tx4939_ccfg_set(TX4939_CCFG_WR);
+}
+
+void __init tx4939_wdt_init(void)
+{
+	txx9_wdt_init(TX4939_TMR_REG(2) & 0xfffffffffULL);
+}
+
+static void tx4939_machine_restart(char *command)
+{
+	local_irq_disable();
+	pr_emerg("Rebooting (with %s watchdog reset)...\n",
+		 (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDREXEN) ?
+		 "external" : "internal");
+	/* clear watchdog status */
+	tx4939_ccfg_set(TX4939_CCFG_WDRST);	/* W1C */
+	txx9_wdt_now(TX4939_TMR_REG(2) & 0xfffffffffULL);
+	while (!(____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDRST))
+		;
+	mdelay(10);
+	if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDREXEN) {
+		pr_emerg("Rebooting (with internal watchdog reset)...\n");
+		/* External WDRST failed.  Do internal watchdog reset */
+		tx4939_ccfg_clear(TX4939_CCFG_WDREXEN);
+	}
+	/* fallback */
+	(*_machine_halt)();
+}
+
+void show_registers(struct pt_regs *regs);
+static int tx4939_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	int data = regs->cp0_cause & 4;
+	console_verbose();
+	pr_err("%cBE exception at %#lx\n",
+	       data ? 'D' : 'I', regs->cp0_epc);
+	pr_err("ccfg:%llx, toea:%llx\n",
+	       (unsigned long long)____raw_readq(&tx4939_ccfgptr->ccfg),
+	       (unsigned long long)____raw_readq(&tx4939_ccfgptr->toea));
+#ifdef CONFIG_PCI
+	tx4927_report_pcic_status();
+#endif
+	show_registers(regs);
+	panic("BusError!");
+}
+static void __init tx4939_be_init(void)
+{
+	board_be_handler = tx4939_be_handler;
+}
+
+static struct resource tx4939_sdram_resource[4];
+static struct resource tx4939_sram_resource;
+#define TX4939_SRAM_SIZE 0x800
+
+void __init tx4939_add_memory_regions(void)
+{
+	int i;
+	unsigned long start, size;
+	u64 win;
+
+	for (i = 0; i < 4; i++) {
+		if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i)))
+			continue;
+		win = ____raw_readq(&tx4939_ddrcptr->win[i]);
+		start = (unsigned long)(win >> 48);
+		size = (((unsigned long)(win >> 32) & 0xffff) + 1) - start;
+		add_memory_region(start << 20, size << 20, BOOT_MEM_RAM);
+	}
+}
+
+void __init tx4939_setup(void)
+{
+	int i;
+	__u32 divmode;
+	__u64 pcfg;
+	int cpuclk = 0;
+
+	txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE,
+			  TX4939_REG_SIZE);
+	set_c0_config(TX49_CONF_CWFON);
+
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 4; i++) {
+		if (!(TX4939_EBUSC_CR(i) & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX4939_EBUSC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX4939_EBUSC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	if (txx9_master_clock) {
+		/* calculate cpu_clock from master_clock */
+		divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) &
+			TX4939_CCFG_MULCLK_MASK;
+		cpuclk = txx9_master_clock * 20 / 2;
+		switch (divmode) {
+		case TX4939_CCFG_MULCLK_8:
+			cpuclk = cpuclk / 3 * 4 /* / 6 *  8 */; break;
+		case TX4939_CCFG_MULCLK_9:
+			cpuclk = cpuclk / 2 * 3 /* / 6 *  9 */; break;
+		case TX4939_CCFG_MULCLK_10:
+			cpuclk = cpuclk / 3 * 5 /* / 6 * 10 */; break;
+		case TX4939_CCFG_MULCLK_11:
+			cpuclk = cpuclk / 6 * 11; break;
+		case TX4939_CCFG_MULCLK_12:
+			cpuclk = cpuclk * 2 /* / 6 * 12 */; break;
+		case TX4939_CCFG_MULCLK_13:
+			cpuclk = cpuclk / 6 * 13; break;
+		case TX4939_CCFG_MULCLK_14:
+			cpuclk = cpuclk / 3 * 7 /* / 6 * 14 */; break;
+		case TX4939_CCFG_MULCLK_15:
+			cpuclk = cpuclk / 2 * 5 /* / 6 * 15 */; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		if (txx9_cpu_clock == 0)
+			txx9_cpu_clock = 400000000;	/* 400MHz */
+		/* calculate master_clock from cpu_clock */
+		cpuclk = txx9_cpu_clock;
+		divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) &
+			TX4939_CCFG_MULCLK_MASK;
+		switch (divmode) {
+		case TX4939_CCFG_MULCLK_8:
+			txx9_master_clock = cpuclk * 6 / 8; break;
+		case TX4939_CCFG_MULCLK_9:
+			txx9_master_clock = cpuclk * 6 / 9; break;
+		case TX4939_CCFG_MULCLK_10:
+			txx9_master_clock = cpuclk * 6 / 10; break;
+		case TX4939_CCFG_MULCLK_11:
+			txx9_master_clock = cpuclk * 6 / 11; break;
+		case TX4939_CCFG_MULCLK_12:
+			txx9_master_clock = cpuclk * 6 / 12; break;
+		case TX4939_CCFG_MULCLK_13:
+			txx9_master_clock = cpuclk * 6 / 13; break;
+		case TX4939_CCFG_MULCLK_14:
+			txx9_master_clock = cpuclk * 6 / 14; break;
+		case TX4939_CCFG_MULCLK_15:
+			txx9_master_clock = cpuclk * 6 / 15; break;
+		}
+		txx9_master_clock /= 10; /* * 2 / 20 */
+	}
+	/* calculate gbus_clock from cpu_clock */
+	divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) &
+		TX4939_CCFG_YDIVMODE_MASK;
+	txx9_gbus_clock = txx9_cpu_clock;
+	switch (divmode) {
+	case TX4939_CCFG_YDIVMODE_2:
+		txx9_gbus_clock /= 2; break;
+	case TX4939_CCFG_YDIVMODE_3:
+		txx9_gbus_clock /= 3; break;
+	case TX4939_CCFG_YDIVMODE_5:
+		txx9_gbus_clock /= 5; break;
+	case TX4939_CCFG_YDIVMODE_6:
+		txx9_gbus_clock /= 6; break;
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	tx4939_wdr_init();
+	/* clear BusErrorOnWrite flag (W1C) */
+	tx4939_ccfg_set(TX4939_CCFG_WDRST | TX4939_CCFG_BEOW);
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx4939_ccfg_set(TX4939_CCFG_TOE);
+
+	/* DMA selection */
+	txx9_clear64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_DMASEL_ALL);
+
+	/* Use external clock for external arbiter */
+	if (!(____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCIARB))
+		txx9_clear64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_PCICLKEN_ALL);
+
+	pr_info("%s -- %dMHz(M%dMHz,G%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+		txx9_pcode_str,
+		(cpuclk + 500000) / 1000000,
+		(txx9_master_clock + 500000) / 1000000,
+		(txx9_gbus_clock + 500000) / 1000000,
+		(__u32)____raw_readq(&tx4939_ccfgptr->crir),
+		(unsigned long long)____raw_readq(&tx4939_ccfgptr->ccfg),
+		(unsigned long long)____raw_readq(&tx4939_ccfgptr->pcfg));
+
+	pr_info("%s DDRC -- EN:%08x", txx9_pcode_str,
+		(__u32)____raw_readq(&tx4939_ddrcptr->winen));
+	for (i = 0; i < 4; i++) {
+		__u64 win = ____raw_readq(&tx4939_ddrcptr->win[i]);
+		if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i)))
+			continue;	/* disabled */
+		printk(KERN_CONT " #%d:%016llx", i, (unsigned long long)win);
+		tx4939_sdram_resource[i].name = "DDR SDRAM";
+		tx4939_sdram_resource[i].start =
+			(unsigned long)(win >> 48) << 20;
+		tx4939_sdram_resource[i].end =
+			((((unsigned long)(win >> 32) & 0xffff) + 1) <<
+			 20) - 1;
+		tx4939_sdram_resource[i].flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4939_sdram_resource[i]);
+	}
+	printk(KERN_CONT "\n");
+
+	/* SRAM */
+	if (____raw_readq(&tx4939_sramcptr->cr) & 1) {
+		unsigned int size = TX4939_SRAM_SIZE;
+		tx4939_sram_resource.name = "SRAM";
+		tx4939_sram_resource.start =
+			(____raw_readq(&tx4939_sramcptr->cr) >> (39-11))
+			& ~(size - 1);
+		tx4939_sram_resource.end =
+			tx4939_sram_resource.start + TX4939_SRAM_SIZE - 1;
+		tx4939_sram_resource.flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4939_sram_resource);
+	}
+
+	/* TMR */
+	/* disable all timers */
+	for (i = 0; i < TX4939_NR_TMR; i++)
+		txx9_tmr_init(TX4939_TMR_REG(i) & 0xfffffffffULL);
+
+	/* DMA */
+	for (i = 0; i < 2; i++)
+		____raw_writeq(TX4938_DMA_MCR_MSTEN,
+			       (void __iomem *)(TX4939_DMA_REG(i) + 0x50));
+
+	/* set PCIC1 reset (required to prevent hangup on BIST) */
+	txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1RST);
+	pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg);
+	if (pcfg & (TX4939_PCFG_ET0MODE | TX4939_PCFG_ET1MODE)) {
+		mdelay(1);	/* at least 128 cpu clock */
+		/* clear PCIC1 reset */
+		txx9_clear64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1RST);
+	} else {
+		pr_info("%s: stop PCIC1\n", txx9_pcode_str);
+		/* stop PCIC1 */
+		txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1CKD);
+	}
+	if (!(pcfg & TX4939_PCFG_ET0MODE)) {
+		pr_info("%s: stop ETH0\n", txx9_pcode_str);
+		txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH0RST);
+		txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH0CKD);
+	}
+	if (!(pcfg & TX4939_PCFG_ET1MODE)) {
+		pr_info("%s: stop ETH1\n", txx9_pcode_str);
+		txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH1RST);
+		txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH1CKD);
+	}
+
+	_machine_restart = tx4939_machine_restart;
+	board_be_init = tx4939_be_init;
+}
+
+void __init tx4939_time_init(unsigned int tmrnr)
+{
+	if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_TINTDIS)
+		txx9_clockevent_init(TX4939_TMR_REG(tmrnr) & 0xfffffffffULL,
+				     TXX9_IRQ_BASE + TX4939_IR_TMR(tmrnr),
+				     TXX9_IMCLK);
+}
+
+void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+	unsigned int ch_mask = 0;
+	__u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg);
+
+	cts_mask |= ~1;	/* only SIO0 have RTS/CTS */
+	if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO0)
+		cts_mask |= 1 << 0; /* disable SIO0 RTS/CTS by PCFG setting */
+	if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO2)
+		ch_mask |= 1 << 2; /* disable SIO2 by PCFG setting */
+	if (pcfg & TX4939_PCFG_SIO3MODE)
+		ch_mask |= 1 << 3; /* disable SIO3 by PCFG setting */
+	for (i = 0; i < 4; i++) {
+		if ((1 << i) & ch_mask)
+			continue;
+		txx9_sio_init(TX4939_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4939_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+	}
+}
+
+#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
+static int tx4939_get_eth_speed(struct net_device *dev)
+{
+	struct ethtool_cmd cmd = { ETHTOOL_GSET };
+	int speed = 100;	/* default 100Mbps */
+	int err;
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
+		return speed;
+	err = dev->ethtool_ops->get_settings(dev, &cmd);
+	if (err < 0)
+		return speed;
+	speed = cmd.speed == SPEED_100 ? 100 : 10;
+	return speed;
+}
+static int tx4939_netdev_event(struct notifier_block *this,
+			       unsigned long event,
+			       void *ptr)
+{
+	struct net_device *dev = ptr;
+	if (event == NETDEV_CHANGE && netif_carrier_ok(dev)) {
+		__u64 bit = 0;
+		if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(0))
+			bit = TX4939_PCFG_SPEED0;
+		else if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(1))
+			bit = TX4939_PCFG_SPEED1;
+		if (bit) {
+			int speed = tx4939_get_eth_speed(dev);
+			if (speed == 100)
+				txx9_set64(&tx4939_ccfgptr->pcfg, bit);
+			else
+				txx9_clear64(&tx4939_ccfgptr->pcfg, bit);
+		}
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block tx4939_netdev_notifier = {
+	.notifier_call = tx4939_netdev_event,
+	.priority = 1,
+};
+
+void __init tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+	u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg);
+
+	if (addr0 && (pcfg & TX4939_PCFG_ET0MODE))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4939_IR_ETH(0), addr0);
+	if (addr1 && (pcfg & TX4939_PCFG_ET1MODE))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4939_IR_ETH(1), addr1);
+	register_netdevice_notifier(&tx4939_netdev_notifier);
+}
+#else
+void __init tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+}
+#endif
+
+void __init tx4939_mtd_init(int ch)
+{
+	struct physmap_flash_data pdata = {
+		.width = TX4939_EBUSC_WIDTH(ch) / 8,
+	};
+	unsigned long start = txx9_ce_res[ch].start;
+	unsigned long size = txx9_ce_res[ch].end - start + 1;
+
+	if (!(TX4939_EBUSC_CR(ch) & 0x8))
+		return;	/* disabled */
+	txx9_physmap_flash_init(ch, start, size, &pdata);
+}
+
+#define TX4939_ATA_REG_PHYS(ch) (TX4939_ATA_REG(ch) & 0xfffffffffULL)
+void __init tx4939_ata_init(void)
+{
+	static struct resource ata0_res[] = {
+		{
+			.start = TX4939_ATA_REG_PHYS(0),
+			.end = TX4939_ATA_REG_PHYS(0) + 0x1000 - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = TXX9_IRQ_BASE + TX4939_IR_ATA(0),
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	static struct resource ata1_res[] = {
+		{
+			.start = TX4939_ATA_REG_PHYS(1),
+			.end = TX4939_ATA_REG_PHYS(1) + 0x1000 - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = TXX9_IRQ_BASE + TX4939_IR_ATA(1),
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	static struct platform_device ata0_dev = {
+		.name = "tx4939ide",
+		.id = 0,
+		.num_resources = ARRAY_SIZE(ata0_res),
+		.resource = ata0_res,
+	};
+	static struct platform_device ata1_dev = {
+		.name = "tx4939ide",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(ata1_res),
+		.resource = ata1_res,
+	};
+	__u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg);
+
+	if (pcfg & TX4939_PCFG_ATA0MODE)
+		platform_device_register(&ata0_dev);
+	if ((pcfg & (TX4939_PCFG_ATA1MODE |
+		     TX4939_PCFG_ET1MODE |
+		     TX4939_PCFG_ET0MODE)) == TX4939_PCFG_ATA1MODE)
+		platform_device_register(&ata1_dev);
+}
+
+static void __init tx4939_stop_unused_modules(void)
+{
+	__u64 pcfg, rst = 0, ckd = 0;
+	char buf[128];
+
+	buf[0] = '\0';
+	local_irq_disable();
+	pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg);
+	if ((pcfg & TX4939_PCFG_I2SMODE_MASK) !=
+	    TX4939_PCFG_I2SMODE_ACLC) {
+		rst |= TX4939_CLKCTR_ACLRST;
+		ckd |= TX4939_CLKCTR_ACLCKD;
+		strcat(buf, " ACLC");
+	}
+	if ((pcfg & TX4939_PCFG_I2SMODE_MASK) !=
+	    TX4939_PCFG_I2SMODE_I2S &&
+	    (pcfg & TX4939_PCFG_I2SMODE_MASK) !=
+	    TX4939_PCFG_I2SMODE_I2S_ALT) {
+		rst |= TX4939_CLKCTR_I2SRST;
+		ckd |= TX4939_CLKCTR_I2SCKD;
+		strcat(buf, " I2S");
+	}
+	if (!(pcfg & TX4939_PCFG_ATA0MODE)) {
+		rst |= TX4939_CLKCTR_ATA0RST;
+		ckd |= TX4939_CLKCTR_ATA0CKD;
+		strcat(buf, " ATA0");
+	}
+	if (!(pcfg & TX4939_PCFG_ATA1MODE)) {
+		rst |= TX4939_CLKCTR_ATA1RST;
+		ckd |= TX4939_CLKCTR_ATA1CKD;
+		strcat(buf, " ATA1");
+	}
+	if (pcfg & TX4939_PCFG_SPIMODE) {
+		rst |= TX4939_CLKCTR_SPIRST;
+		ckd |= TX4939_CLKCTR_SPICKD;
+		strcat(buf, " SPI");
+	}
+	if (!(pcfg & (TX4939_PCFG_VSSMODE | TX4939_PCFG_VPSMODE))) {
+		rst |= TX4939_CLKCTR_VPCRST;
+		ckd |= TX4939_CLKCTR_VPCCKD;
+		strcat(buf, " VPC");
+	}
+	if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO2) {
+		rst |= TX4939_CLKCTR_SIO2RST;
+		ckd |= TX4939_CLKCTR_SIO2CKD;
+		strcat(buf, " SIO2");
+	}
+	if (pcfg & TX4939_PCFG_SIO3MODE) {
+		rst |= TX4939_CLKCTR_SIO3RST;
+		ckd |= TX4939_CLKCTR_SIO3CKD;
+		strcat(buf, " SIO3");
+	}
+	if (rst | ckd) {
+		txx9_set64(&tx4939_ccfgptr->clkctr, rst);
+		txx9_set64(&tx4939_ccfgptr->clkctr, ckd);
+	}
+	local_irq_enable();
+	if (buf[0])
+		pr_info("%s: stop%s\n", txx9_pcode_str, buf);
+}
+
+static int __init tx4939_late_init(void)
+{
+	if (txx9_pcode != 0x4939)
+		return -ENODEV;
+	tx4939_stop_unused_modules();
+	return 0;
+}
+late_initcall(tx4939_late_init);
diff --git a/arch/mips/txx9/generic/spi_eeprom.c b/arch/mips/txx9/generic/spi_eeprom.c
new file mode 100644
index 0000000..75c3472
--- /dev/null
+++ b/arch/mips/txx9/generic/spi_eeprom.c
@@ -0,0 +1,103 @@
+/*
+ * spi_eeprom.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <asm/txx9/spi.h>
+
+#define AT250X0_PAGE_SIZE	8
+
+/* register board information for at25 driver */
+int __init spi_eeprom_register(int busid, int chipid, int size)
+{
+	struct spi_board_info info = {
+		.modalias = "at25",
+		.max_speed_hz = 1500000,	/* 1.5Mbps */
+		.bus_num = busid,
+		.chip_select = chipid,
+		/* Mode 0: High-Active, Sample-Then-Shift */
+	};
+	struct spi_eeprom *eeprom;
+	eeprom = kzalloc(sizeof(*eeprom), GFP_KERNEL);
+	if (!eeprom)
+		return -ENOMEM;
+	strcpy(eeprom->name, "at250x0");
+	eeprom->byte_len = size;
+	eeprom->page_size = AT250X0_PAGE_SIZE;
+	eeprom->flags = EE_ADDR1;
+	info.platform_data = eeprom;
+	return spi_register_board_info(&info, 1);
+}
+
+/* simple temporary spi driver to provide early access to seeprom. */
+
+static struct read_param {
+	int busid;
+	int chipid;
+	int address;
+	unsigned char *buf;
+	int len;
+} *read_param;
+
+static int __init early_seeprom_probe(struct spi_device *spi)
+{
+	int stat = 0;
+	u8 cmd[2];
+	int len = read_param->len;
+	char *buf = read_param->buf;
+	int address = read_param->address;
+
+	dev_info(&spi->dev, "spiclk %u KHz.\n",
+		 (spi->max_speed_hz + 500) / 1000);
+	if (read_param->busid != spi->master->bus_num ||
+	    read_param->chipid != spi->chip_select)
+		return -ENODEV;
+	while (len > 0) {
+		/* spi_write_then_read can only work with small chunk */
+		int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE;
+		cmd[0] = 0x03;	/* AT25_READ */
+		cmd[1] = address;
+		stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c);
+		buf += c;
+		len -= c;
+		address += c;
+	}
+	return stat;
+}
+
+static struct spi_driver early_seeprom_driver __initdata = {
+	.driver = {
+		.name	= "at25",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= early_seeprom_probe,
+};
+
+int __init spi_eeprom_read(int busid, int chipid, int address,
+			   unsigned char *buf, int len)
+{
+	int ret;
+	struct read_param param = {
+		.busid = busid,
+		.chipid = chipid,
+		.address = address,
+		.buf = buf,
+		.len = len
+	};
+
+	read_param = &param;
+	ret = spi_register_driver(&early_seeprom_driver);
+	if (!ret)
+		spi_unregister_driver(&early_seeprom_driver);
+	return ret;
+}
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 70c4c8e..c899c0c 100644
--- a/arch/mips/txx9/jmr3927/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -47,7 +47,6 @@ void __init jmr3927_prom_init(void)
 	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
 		printk(KERN_ERR "TX3927 TLB off\n");
 
-	prom_init_cmdline();
 	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
 	txx9_sio_putchar_init(TX3927_SIO_REG(1));
 }
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 87db41b..25e50a7 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -62,7 +62,6 @@ static void __init jmr3927_time_init(void)
 }
 
 #define DO_WRITE_THROUGH
-#define DO_ENABLE_CACHE
 
 static void jmr3927_board_init(void);
 
@@ -77,11 +76,6 @@ static void __init jmr3927_mem_setup(void)
 	/* cache setup */
 	{
 		unsigned int conf;
-#ifdef DO_ENABLE_CACHE
-		int mips_ic_disable = 0, mips_dc_disable = 0;
-#else
-		int mips_ic_disable = 1, mips_dc_disable = 1;
-#endif
 #ifdef DO_WRITE_THROUGH
 		int mips_config_cwfon = 0;
 		int mips_config_wbon = 0;
@@ -91,10 +85,7 @@ static void __init jmr3927_mem_setup(void)
 #endif
 
 		conf = read_c0_conf();
-		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
-			  TX39_CONF_WBON | TX39_CONF_CWFON);
-		conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
-		conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
+		conf &= ~(TX39_CONF_WBON | TX39_CONF_CWFON);
 		conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
 		conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0;
 
@@ -199,11 +190,25 @@ static void __init jmr3927_rtc_init(void)
 	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
+static void __init jmr3927_mtd_init(void)
+{
+	int i;
+
+	for (i = 0; i < 2; i++)
+		tx3927_mtd_init(i);
+}
+
 static void __init jmr3927_device_init(void)
 {
+	unsigned long iocled_base = JMR3927_IOC_LED_ADDR - IO_BASE;
+#ifdef __LITTLE_ENDIAN
+	iocled_base |= 1;
+#endif
 	__swizzle_addr_b = jmr3927_swizzle_addr_b;
 	jmr3927_rtc_init();
 	tx3927_wdt_init();
+	jmr3927_mtd_init();
+	txx9_iocled_init(iocled_base, -1, 8, 1, "green", NULL);
 }
 
 struct txx9_board_vec jmr3927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
index 00cd523..9c14ebb 100644
--- a/arch/mips/txx9/rbtx4927/irq.c
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -133,15 +133,20 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq)
 	u8 level3;
 
 	level3 = readb(rbtx4927_imstat_addr) & 0x1f;
-	if (level3)
-		sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
-	return sw_irq;
+	if (unlikely(!level3))
+		return -1;
+	return RBTX4927_IRQ_IOC + __fls8(level3);
 }
 
 static void __init toshiba_rbtx4927_irq_ioc_init(void)
 {
 	int i;
 
+	/* mask all IOC interrupts */
+	writeb(0, rbtx4927_imask_addr);
+	/* clear SoftInt interrupts */
+	writeb(0, rbtx4927_softint_addr);
+
 	for (i = RBTX4927_IRQ_IOC;
 	     i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++)
 		set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type,
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index 1dc0a5b..cc97c6a 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -36,7 +36,6 @@
 
 void __init rbtx4927_prom_init(void)
 {
-	prom_init_cmdline();
 	add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
 	txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 0d39baf..4a74423 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -48,6 +48,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/txx9/generic.h>
@@ -185,14 +186,8 @@ static void __init rbtx4937_clock_init(void);
 
 static void __init rbtx4927_mem_setup(void)
 {
-	u32 cp0_config;
 	char *argptr;
 
-	/* enable caches -- HCP5 does this, pmon does not */
-	cp0_config = read_c0_config();
-	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
-	write_c0_config(cp0_config);
-
 	if (TX4927_REV_PCODE() == 0x4927) {
 		rbtx4927_clock_init();
 		tx4927_setup();
@@ -212,6 +207,14 @@ static void __init rbtx4927_mem_setup(void)
 	set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
 #endif
 
+	/* TX4927-SIO DTR on (PIO[15]) */
+	gpio_request(15, "sio-dtr");
+	gpio_direction_output(15, 1);
+	gpio_request(0, "led");
+	gpio_direction_output(0, 1);
+	gpio_request(1, "led");
+	gpio_direction_output(1, 1);
+
 	tx4927_sio_init(0, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 	argptr = prom_getcmdline();
@@ -304,11 +307,21 @@ static void __init rbtx4927_ne_init(void)
 	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
+static void __init rbtx4927_mtd_init(void)
+{
+	int i;
+
+	for (i = 0; i < 2; i++)
+		tx4927_mtd_init(i);
+}
+
 static void __init rbtx4927_device_init(void)
 {
 	toshiba_rbtx4927_rtc_init();
 	rbtx4927_ne_init();
 	tx4927_wdt_init();
+	rbtx4927_mtd_init();
+	txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL);
 }
 
 struct txx9_board_vec rbtx4927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile
index 9dcc52a..f3e1f59 100644
--- a/arch/mips/txx9/rbtx4938/Makefile
+++ b/arch/mips/txx9/rbtx4938/Makefile
@@ -1,3 +1,3 @@
-obj-y	+= prom.o setup.o irq.o spi_eeprom.o
+obj-y	+= prom.o setup.o irq.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index ca2f830..7d21bef 100644
--- a/arch/mips/txx9/rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -85,10 +85,10 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq)
 	u8 level3;
 
 	level3 = readb(rbtx4938_imstat_addr);
-	if (level3)
-		/* must use fls so onboard ATA has priority */
-		sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1;
-	return sw_irq;
+	if (unlikely(!level3))
+		return -1;
+	/* must use fls so onboard ATA has priority */
+	return RBTX4938_IRQ_IOC + __fls8(level3);
 }
 
 static void __init
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index d73123c..bcb4692 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -18,9 +18,6 @@
 
 void __init rbtx4938_prom_init(void)
 {
-#ifndef CONFIG_TX4938_NAND_BOOT
-	prom_init_cmdline();
-#endif
 	add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
 	txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 9ab48de..547ff29 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/reboot.h>
 #include <asm/io.h>
@@ -110,6 +111,7 @@ static void __init rbtx4938_pci_setup(void)
 #define	SEEPROM2_CS	0	/* IOC */
 #define	SEEPROM3_CS	1	/* IOC */
 #define	SRTC_CS	2	/* IOC */
+#define SPI_BUSNO	0
 
 static int __init rbtx4938_ethaddr_init(void)
 {
@@ -119,7 +121,7 @@ static int __init rbtx4938_ethaddr_init(void)
 	int i;
 
 	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
-	if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
+	if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) {
 		printk(KERN_ERR "seeprom: read error.\n");
 		return -ENODEV;
 	} else {
@@ -173,23 +175,30 @@ static void __init rbtx4938_mem_setup(void)
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
+	pr_info("PIOSEL: disabling both ATA and NAND selection\n");
 	txx9_clear64(&tx4938_ccfgptr->pcfg,
 		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-	printk(KERN_INFO "PIOSEL: enabling nand selection\n");
+	pr_info("PIOSEL: enabling NAND selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-	printk(KERN_INFO "PIOSEL: enabling ata selection\n");
+	pr_info("PIOSEL: enabling ATA selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif
 
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP
+	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+	pr_info("PIOSEL: NAND %s, ATA %s\n",
+		(pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled",
+		(pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled");
+#endif
+
 	rbtx4938_spi_setup();
 	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
 	/* fixup piosel */
@@ -279,9 +288,9 @@ static int __init rbtx4938_spi_init(void)
 		.mode = SPI_MODE_1 | SPI_CS_HIGH,
 	};
 	spi_register_board_info(&srtc_info, 1);
-	spi_eeprom_register(SEEPROM1_CS);
-	spi_eeprom_register(16 + SEEPROM2_CS);
-	spi_eeprom_register(16 + SEEPROM3_CS);
+	spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128);
+	spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128);
+	spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128);
 	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
 	gpio_direction_output(16 + SRTC_CS, 0);
 	gpio_request(SEEPROM1_CS, "seeprom1");
@@ -290,10 +299,46 @@ static int __init rbtx4938_spi_init(void)
 	gpio_direction_output(16 + SEEPROM2_CS, 1);
 	gpio_request(16 + SEEPROM3_CS, "seeprom3");
 	gpio_direction_output(16 + SEEPROM3_CS, 1);
-	tx4938_spi_init(0);
+	tx4938_spi_init(SPI_BUSNO);
 	return 0;
 }
 
+static void __init rbtx4938_mtd_init(void)
+{
+	struct physmap_flash_data pdata = {
+		.width = 4,
+	};
+
+	switch (readb(rbtx4938_bdipsw_addr) & 7) {
+	case 0:
+		/* Boot */
+		txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata);
+		/* System */
+		txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+		break;
+	case 1:
+		/* System */
+		txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+		/* Boot */
+		txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata);
+		break;
+	case 2:
+		/* Ext */
+		txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+		/* System */
+		txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+		/* Boot */
+		txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata);
+		break;
+	case 3:
+		/* Boot */
+		txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata);
+		/* System */
+		txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata);
+		break;
+	}
+}
+
 static void __init rbtx4938_arch_init(void)
 {
 	gpiochip_add(&rbtx4938_spi_gpio_chip);
@@ -306,6 +351,9 @@ static void __init rbtx4938_device_init(void)
 	rbtx4938_ethaddr_init();
 	rbtx4938_ne_init();
 	tx4938_wdt_init();
+	rbtx4938_mtd_init();
+	tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1);
+	txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
 }
 
 struct txx9_board_vec rbtx4938_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c
deleted file mode 100644
index a7ea8b0..0000000
--- a/arch/mips/txx9/rbtx4938/spi_eeprom.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * spi_eeprom.c
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <asm/txx9/spi.h>
-
-#define AT250X0_PAGE_SIZE	8
-
-/* register board information for at25 driver */
-int __init spi_eeprom_register(int chipid)
-{
-	static struct spi_eeprom eeprom = {
-		.name = "at250x0",
-		.byte_len = 128,
-		.page_size = AT250X0_PAGE_SIZE,
-		.flags = EE_ADDR1,
-	};
-	struct spi_board_info info = {
-		.modalias = "at25",
-		.max_speed_hz = 1500000,	/* 1.5Mbps */
-		.bus_num = 0,
-		.chip_select = chipid,
-		.platform_data = &eeprom,
-		/* Mode 0: High-Active, Sample-Then-Shift */
-	};
-
-	return spi_register_board_info(&info, 1);
-}
-
-/* simple temporary spi driver to provide early access to seeprom. */
-
-static struct read_param {
-	int chipid;
-	int address;
-	unsigned char *buf;
-	int len;
-} *read_param;
-
-static int __init early_seeprom_probe(struct spi_device *spi)
-{
-	int stat = 0;
-	u8 cmd[2];
-	int len = read_param->len;
-	char *buf = read_param->buf;
-	int address = read_param->address;
-
-	dev_info(&spi->dev, "spiclk %u KHz.\n",
-		 (spi->max_speed_hz + 500) / 1000);
-	if (read_param->chipid != spi->chip_select)
-		return -ENODEV;
-	while (len > 0) {
-		/* spi_write_then_read can only work with small chunk */
-		int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE;
-		cmd[0] = 0x03;	/* AT25_READ */
-		cmd[1] = address;
-		stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c);
-		buf += c;
-		len -= c;
-		address += c;
-	}
-	return stat;
-}
-
-static struct spi_driver early_seeprom_driver __initdata = {
-	.driver = {
-		.name	= "at25",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= early_seeprom_probe,
-};
-
-int __init spi_eeprom_read(int chipid, int address,
-			   unsigned char *buf, int len)
-{
-	int ret;
-	struct read_param param = {
-		.chipid = chipid,
-		.address = address,
-		.buf = buf,
-		.len = len
-	};
-
-	read_param = &param;
-	ret = spi_register_driver(&early_seeprom_driver);
-	if (!ret)
-		spi_unregister_driver(&early_seeprom_driver);
-	return ret;
-}
diff --git a/arch/mips/txx9/rbtx4939/Makefile b/arch/mips/txx9/rbtx4939/Makefile
new file mode 100644
index 0000000..3232cd0
--- /dev/null
+++ b/arch/mips/txx9/rbtx4939/Makefile
@@ -0,0 +1,3 @@
+obj-y	 += irq.o setup.o prom.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4939/irq.c b/arch/mips/txx9/rbtx4939/irq.c
new file mode 100644
index 0000000..500cc0a
--- /dev/null
+++ b/arch/mips/txx9/rbtx4939/irq.c
@@ -0,0 +1,96 @@
+/*
+ * Toshiba RBTX4939 interrupt routines
+ * Based on linux/arch/mips/txx9/rbtx4938/irq.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9/rbtx4939.h>
+
+/*
+ * RBTX4939 IOC controller definition
+ */
+
+static void rbtx4939_ioc_irq_unmask(unsigned int irq)
+{
+	int ioc_nr = irq - RBTX4939_IRQ_IOC;
+
+	writeb(readb(rbtx4939_ien_addr) | (1 << ioc_nr), rbtx4939_ien_addr);
+}
+
+static void rbtx4939_ioc_irq_mask(unsigned int irq)
+{
+	int ioc_nr = irq - RBTX4939_IRQ_IOC;
+
+	writeb(readb(rbtx4939_ien_addr) & ~(1 << ioc_nr), rbtx4939_ien_addr);
+	mmiowb();
+}
+
+static struct irq_chip rbtx4939_ioc_irq_chip = {
+	.name		= "IOC",
+	.ack		= rbtx4939_ioc_irq_mask,
+	.mask		= rbtx4939_ioc_irq_mask,
+	.mask_ack	= rbtx4939_ioc_irq_mask,
+	.unmask		= rbtx4939_ioc_irq_unmask,
+};
+
+
+static inline int rbtx4939_ioc_irqroute(void)
+{
+	unsigned char istat = readb(rbtx4939_ifac2_addr);
+
+	if (unlikely(istat == 0))
+		return -1;
+	return RBTX4939_IRQ_IOC + __fls8(istat);
+}
+
+static int rbtx4939_irq_dispatch(int pending)
+{
+	int irq;
+
+	if (pending & CAUSEF_IP7)
+		return MIPS_CPU_IRQ_BASE + 7;
+	irq = tx4939_irq();
+	if (likely(irq >= 0)) {
+		/* redirect IOC interrupts */
+		switch (irq) {
+		case RBTX4939_IRQ_IOCINT:
+			irq = rbtx4939_ioc_irqroute();
+			break;
+		}
+	} else if (pending & CAUSEF_IP0)
+		irq = MIPS_CPU_IRQ_BASE + 0;
+	else if (pending & CAUSEF_IP1)
+		irq = MIPS_CPU_IRQ_BASE + 1;
+	else
+		irq = -1;
+	return irq;
+}
+
+void __init rbtx4939_irq_setup(void)
+{
+	int i;
+
+	/* mask all IOC interrupts */
+	writeb(0, rbtx4939_ien_addr);
+
+	/* clear SoftInt interrupts */
+	writeb(0, rbtx4939_softint_addr);
+
+	txx9_irq_dispatch = rbtx4939_irq_dispatch;
+
+	tx4939_irq_init();
+	for (i = RBTX4939_IRQ_IOC;
+	     i < RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &rbtx4939_ioc_irq_chip,
+					 handle_level_irq);
+
+	set_irq_chained_handler(RBTX4939_IRQ_IOCINT, handle_simple_irq);
+}
diff --git a/arch/mips/txx9/rbtx4939/prom.c b/arch/mips/txx9/rbtx4939/prom.c
new file mode 100644
index 0000000..bd277ec
--- /dev/null
+++ b/arch/mips/txx9/rbtx4939/prom.c
@@ -0,0 +1,17 @@
+/*
+ * rbtx4939 specific prom routines
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4939.h>
+
+void __init rbtx4939_prom_init(void)
+{
+	tx4939_add_memory_regions();
+	txx9_sio_putchar_init(TX4939_SIO_REG(0) & 0xfffffffffULL);
+}
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
new file mode 100644
index 0000000..9855d7b
--- /dev/null
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -0,0 +1,307 @@
+/*
+ * Toshiba RBTX4939 setup routines.
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <asm/reboot.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4939.h>
+
+static void rbtx4939_machine_restart(char *command)
+{
+	local_irq_disable();
+	writeb(1, rbtx4939_reseten_addr);
+	writeb(1, rbtx4939_softreset_addr);
+	while (1)
+		;
+}
+
+static void __init rbtx4939_time_init(void)
+{
+	tx4939_time_init(0);
+}
+
+static void __init rbtx4939_pci_setup(void)
+{
+#ifdef CONFIG_PCI
+	int extarb = !(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCIARB);
+	struct pci_controller *c = &txx9_primary_pcic;
+
+	register_pci_controller(c);
+
+	tx4939_report_pciclk();
+	tx4927_pcic_setup(tx4939_pcicptr, c, extarb);
+	if (!(__raw_readq(&tx4939_ccfgptr->pcfg) & TX4939_PCFG_ATA1MODE) &&
+	    (__raw_readq(&tx4939_ccfgptr->pcfg) &
+	     (TX4939_PCFG_ET0MODE | TX4939_PCFG_ET1MODE))) {
+		tx4939_report_pci1clk();
+
+		/* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */
+		c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000);
+		register_pci_controller(c);
+		tx4927_pcic_setup(tx4939_pcic1ptr, c, 0);
+	}
+
+	tx4939_setup_pcierr_irq();
+#endif /* CONFIG_PCI */
+}
+
+static unsigned long long default_ebccr[] __initdata = {
+	0x01c0000000007608ULL, /* 64M ROM */
+	0x017f000000007049ULL, /* 1M IOC */
+	0x0180000000408608ULL, /* ISA */
+	0,
+};
+
+static void __init rbtx4939_ebusc_setup(void)
+{
+	int i;
+	unsigned int sp;
+
+	/* use user-configured speed */
+	sp = TX4939_EBUSC_CR(0) & 0x30;
+	default_ebccr[0] |= sp;
+	default_ebccr[1] |= sp;
+	default_ebccr[2] |= sp;
+	/* initialise by myself */
+	for (i = 0; i < ARRAY_SIZE(default_ebccr); i++) {
+		if (default_ebccr[i])
+			____raw_writeq(default_ebccr[i],
+				       &tx4939_ebuscptr->cr[i]);
+		else
+			____raw_writeq(____raw_readq(&tx4939_ebuscptr->cr[i])
+				       & ~8,
+				       &tx4939_ebuscptr->cr[i]);
+	}
+}
+
+static void __init rbtx4939_update_ioc_pen(void)
+{
+	__u64 pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg);
+	__u64 ccfg = ____raw_readq(&tx4939_ccfgptr->ccfg);
+	__u8 pe1 = readb(rbtx4939_pe1_addr);
+	__u8 pe2 = readb(rbtx4939_pe2_addr);
+	__u8 pe3 = readb(rbtx4939_pe3_addr);
+	if (pcfg & TX4939_PCFG_ATA0MODE)
+		pe1 |= RBTX4939_PE1_ATA(0);
+	else
+		pe1 &= ~RBTX4939_PE1_ATA(0);
+	if (pcfg & TX4939_PCFG_ATA1MODE) {
+		pe1 |= RBTX4939_PE1_ATA(1);
+		pe1 &= ~(RBTX4939_PE1_RMII(0) | RBTX4939_PE1_RMII(1));
+	} else {
+		pe1 &= ~RBTX4939_PE1_ATA(1);
+		if (pcfg & TX4939_PCFG_ET0MODE)
+			pe1 |= RBTX4939_PE1_RMII(0);
+		else
+			pe1 &= ~RBTX4939_PE1_RMII(0);
+		if (pcfg & TX4939_PCFG_ET1MODE)
+			pe1 |= RBTX4939_PE1_RMII(1);
+		else
+			pe1 &= ~RBTX4939_PE1_RMII(1);
+	}
+	if (ccfg & TX4939_CCFG_PTSEL)
+		pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_P |
+			 RBTX4939_PE3_VP_S);
+	else {
+		__u64 vmode = pcfg &
+			(TX4939_PCFG_VSSMODE | TX4939_PCFG_VPSMODE);
+		if (vmode == 0)
+			pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_P |
+				 RBTX4939_PE3_VP_S);
+		else if (vmode == TX4939_PCFG_VPSMODE) {
+			pe3 |= RBTX4939_PE3_VP_P;
+			pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_S);
+		} else if (vmode == TX4939_PCFG_VSSMODE) {
+			pe3 |= RBTX4939_PE3_VP | RBTX4939_PE3_VP_S;
+			pe3 &= ~RBTX4939_PE3_VP_P;
+		} else {
+			pe3 |= RBTX4939_PE3_VP | RBTX4939_PE3_VP_P;
+			pe3 &= ~RBTX4939_PE3_VP_S;
+		}
+	}
+	if (pcfg & TX4939_PCFG_SPIMODE) {
+		if (pcfg & TX4939_PCFG_SIO2MODE_GPIO)
+			pe2 &= ~(RBTX4939_PE2_SIO2 | RBTX4939_PE2_SIO0);
+		else {
+			if (pcfg & TX4939_PCFG_SIO2MODE_SIO2) {
+				pe2 |= RBTX4939_PE2_SIO2;
+				pe2 &= ~RBTX4939_PE2_SIO0;
+			} else {
+				pe2 |= RBTX4939_PE2_SIO0;
+				pe2 &= ~RBTX4939_PE2_SIO2;
+			}
+		}
+		if (pcfg & TX4939_PCFG_SIO3MODE)
+			pe2 |= RBTX4939_PE2_SIO3;
+		else
+			pe2 &= ~RBTX4939_PE2_SIO3;
+		pe2 &= ~RBTX4939_PE2_SPI;
+	} else {
+		pe2 |= RBTX4939_PE2_SPI;
+		pe2 &= ~(RBTX4939_PE2_SIO3 | RBTX4939_PE2_SIO2 |
+			 RBTX4939_PE2_SIO0);
+	}
+	if ((pcfg & TX4939_PCFG_I2SMODE_MASK) == TX4939_PCFG_I2SMODE_GPIO)
+		pe2 |= RBTX4939_PE2_GPIO;
+	else
+		pe2 &= ~RBTX4939_PE2_GPIO;
+	writeb(pe1, rbtx4939_pe1_addr);
+	writeb(pe2, rbtx4939_pe2_addr);
+	writeb(pe3, rbtx4939_pe3_addr);
+}
+
+#define RBTX4939_MAX_7SEGLEDS	8
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+static u8 led_val[RBTX4939_MAX_7SEGLEDS];
+struct rbtx4939_led_data {
+	struct led_classdev cdev;
+	char name[32];
+	unsigned int num;
+};
+
+/* Use "dot" in 7seg LEDs */
+static void rbtx4939_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness value)
+{
+	struct rbtx4939_led_data *led_dat =
+		container_of(led_cdev, struct rbtx4939_led_data, cdev);
+	unsigned int num = led_dat->num;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	led_val[num] = (led_val[num] & 0x7f) | (value ? 0x80 : 0);
+	writeb(led_val[num], rbtx4939_7seg_addr(num / 4, num % 4));
+	local_irq_restore(flags);
+}
+
+static int __init rbtx4939_led_probe(struct platform_device *pdev)
+{
+	struct rbtx4939_led_data *leds_data;
+	int i;
+	static char *default_triggers[] __initdata = {
+		"heartbeat",
+		"ide-disk",
+		"nand-disk",
+	};
+
+	leds_data = kzalloc(sizeof(*leds_data) * RBTX4939_MAX_7SEGLEDS,
+			    GFP_KERNEL);
+	if (!leds_data)
+		return -ENOMEM;
+	for (i = 0; i < RBTX4939_MAX_7SEGLEDS; i++) {
+		int rc;
+		struct rbtx4939_led_data *led_dat = &leds_data[i];
+
+		led_dat->num = i;
+		led_dat->cdev.brightness_set = rbtx4939_led_brightness_set;
+		sprintf(led_dat->name, "rbtx4939:amber:%u", i);
+		led_dat->cdev.name = led_dat->name;
+		if (i < ARRAY_SIZE(default_triggers))
+			led_dat->cdev.default_trigger = default_triggers[i];
+		rc = led_classdev_register(&pdev->dev, &led_dat->cdev);
+		if (rc < 0)
+			return rc;
+		led_dat->cdev.brightness_set(&led_dat->cdev, 0);
+	}
+	return 0;
+
+}
+
+static struct platform_driver rbtx4939_led_driver = {
+	.driver  = {
+		.name = "rbtx4939-led",
+		.owner = THIS_MODULE,
+	},
+};
+
+static void __init rbtx4939_led_setup(void)
+{
+	platform_device_register_simple("rbtx4939-led", -1, NULL, 0);
+	platform_driver_probe(&rbtx4939_led_driver, rbtx4939_led_probe);
+}
+#else
+static inline void rbtx4939_led_setup(void)
+{
+}
+#endif
+
+static void __init rbtx4939_arch_init(void)
+{
+	rbtx4939_pci_setup();
+}
+
+static void __init rbtx4939_device_init(void)
+{
+#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
+	int i, j;
+	unsigned char ethaddr[2][6];
+	for (i = 0; i < 2; i++) {
+		unsigned long area = CKSEG1 + 0x1fff0000 + (i * 0x10);
+		if (readb(rbtx4939_bdipsw_addr) & 8) {
+			u16 buf[3];
+			area -= 0x03000000;
+			for (j = 0; j < 3; j++)
+				buf[j] = le16_to_cpup((u16 *)(area + j * 2));
+			memcpy(ethaddr[i], buf, 6);
+		} else
+			memcpy(ethaddr[i], (void *)area, 6);
+	}
+	tx4939_ethaddr_init(ethaddr[0], ethaddr[1]);
+#endif
+	rbtx4939_led_setup();
+	tx4939_wdt_init();
+	tx4939_ata_init();
+}
+
+static void __init rbtx4939_setup(void)
+{
+	rbtx4939_ebusc_setup();
+	/* always enable ATA0 */
+	txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE);
+	rbtx4939_update_ioc_pen();
+	if (txx9_master_clock == 0)
+		txx9_master_clock = 20000000;
+	tx4939_setup();
+
+	_machine_restart = rbtx4939_machine_restart;
+
+	pr_info("RBTX4939 (Rev %02x) --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
+		readb(rbtx4939_board_rev_addr), readb(rbtx4939_ioc_rev_addr),
+		readb(rbtx4939_udipsw_addr), readb(rbtx4939_bdipsw_addr));
+
+#ifdef CONFIG_PCI
+	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
+#else
+	set_io_port_base(RBTX4939_ETHER_BASE);
+#endif
+
+	tx4939_sio_init(TX4939_SCLK0(txx9_master_clock), 0);
+}
+
+struct txx9_board_vec rbtx4939_vec __initdata = {
+	.system = "Tothiba RBTX4939",
+	.prom_init = rbtx4939_prom_init,
+	.mem_setup = rbtx4939_setup,
+	.irq_setup = rbtx4939_irq_setup,
+	.time_init = rbtx4939_time_init,
+	.device_init = rbtx4939_device_init,
+	.arch_init = rbtx4939_arch_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = tx4939_pci_map_irq,
+#endif
+};
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index e856218..9a9f433 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -53,9 +53,6 @@ config QUICKLIST
 config ARCH_HAS_ILOG2_U32
 	def_bool y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool n
-
 # Use the generic interrupt handling code in kernel/irq/
 config GENERIC_HARDIRQS
 	def_bool y
@@ -71,6 +68,8 @@ mainmenu "Matsushita MN10300/AM33 Kernel Configuration"
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 
 menu "Matsushita MN10300 system setup"
 
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index 761c434..56c64cc 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -20,22 +20,8 @@ EXPORT_SYMBOL(__mn10300_irq_enabled_epsw);
 atomic_t irq_err_count;
 
 /*
- * MN10300 INTC controller operations
+ * MN10300 interrupt controller operations
  */
-static void mn10300_cpupic_disable(unsigned int irq)
-{
-	u16 tmp = GxICR(irq);
-	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
-	tmp = GxICR(irq);
-}
-
-static void mn10300_cpupic_enable(unsigned int irq)
-{
-	u16 tmp = GxICR(irq);
-	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
-	tmp = GxICR(irq);
-}
-
 static void mn10300_cpupic_ack(unsigned int irq)
 {
 	u16 tmp;
@@ -60,26 +46,54 @@ static void mn10300_cpupic_mask_ack(unsigned int irq)
 static void mn10300_cpupic_unmask(unsigned int irq)
 {
 	u16 tmp = GxICR(irq);
-	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
+	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
 	tmp = GxICR(irq);
 }
 
-static void mn10300_cpupic_end(unsigned int irq)
+static void mn10300_cpupic_unmask_clear(unsigned int irq)
 {
+	/* the MN10300 PIC latches its interrupt request bit, even after the
+	 * device has ceased to assert its interrupt line and the interrupt
+	 * channel has been disabled in the PIC, so for level-triggered
+	 * interrupts we need to clear the request bit when we re-enable */
 	u16 tmp = GxICR(irq);
-	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
 	tmp = GxICR(irq);
 }
 
-static struct irq_chip mn10300_cpu_pic = {
-	.name		= "cpu",
-	.disable	= mn10300_cpupic_disable,
-	.enable		= mn10300_cpupic_enable,
+/*
+ * MN10300 PIC level-triggered IRQ handling.
+ *
+ * The PIC has no 'ACK' function per se.  It is possible to clear individual
+ * channel latches, but each latch relatches whether or not the channel is
+ * masked, so we need to clear the latch when we unmask the channel.
+ *
+ * Also for this reason, we don't supply an ack() op (it's unused anyway if
+ * mask_ack() is provided), and mask_ack() just masks.
+ */
+static struct irq_chip mn10300_cpu_pic_level = {
+	.name		= "cpu_l",
+	.disable	= mn10300_cpupic_mask,
+	.enable		= mn10300_cpupic_unmask_clear,
+	.ack		= NULL,
+	.mask		= mn10300_cpupic_mask,
+	.mask_ack	= mn10300_cpupic_mask,
+	.unmask		= mn10300_cpupic_unmask_clear,
+};
+
+/*
+ * MN10300 PIC edge-triggered IRQ handling.
+ *
+ * We use the latch clearing function of the PIC as the 'ACK' function.
+ */
+static struct irq_chip mn10300_cpu_pic_edge = {
+	.name		= "cpu_e",
+	.disable	= mn10300_cpupic_mask,
+	.enable		= mn10300_cpupic_unmask,
 	.ack		= mn10300_cpupic_ack,
 	.mask		= mn10300_cpupic_mask,
 	.mask_ack	= mn10300_cpupic_mask_ack,
 	.unmask		= mn10300_cpupic_unmask,
-	.end		= mn10300_cpupic_end,
 };
 
 /*
@@ -114,7 +128,8 @@ void set_intr_level(int irq, u16 level)
  */
 void set_intr_postackable(int irq)
 {
-	set_irq_handler(irq, handle_level_irq);
+	set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level,
+				 handle_level_irq);
 }
 
 /*
@@ -126,8 +141,12 @@ void __init init_IRQ(void)
 
 	for (irq = 0; irq < NR_IRQS; irq++)
 		if (irq_desc[irq].chip == &no_irq_type)
-			set_irq_chip_and_handler(irq, &mn10300_cpu_pic,
-						 handle_edge_irq);
+			/* due to the PIC latching interrupt requests, even
+			 * when the IRQ is disabled, IRQ_PENDING is superfluous
+			 * and we can use handle_level_irq() for edge-triggered
+			 * interrupts */
+			set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge,
+						 handle_level_irq);
 	unit_init_IRQ();
 }
 
diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c
index 042f792..7978470 100644
--- a/arch/mn10300/kernel/rtc.c
+++ b/arch/mn10300/kernel/rtc.c
@@ -67,7 +67,7 @@ static int set_rtc_mmss(unsigned long nowtime)
 
 	cmos_minutes = CMOS_READ(RTC_MINUTES);
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
+		cmos_minutes = bcd2bin(cmos_minutes);
 
 	/*
 	 * since we're only adjusting minutes and seconds,
@@ -84,8 +84,8 @@ static int set_rtc_mmss(unsigned long nowtime)
 
 	if (abs(real_minutes - cmos_minutes) < 30) {
 		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
 		}
 		CMOS_WRITE(real_seconds, RTC_SECONDS);
 		CMOS_WRITE(real_minutes, RTC_MINUTES);
diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c
index babb7c2..e460658 100644
--- a/arch/mn10300/kernel/time.c
+++ b/arch/mn10300/kernel/time.c
@@ -1,6 +1,6 @@
 /* MN10300 Low level time management
  *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2007-2008 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
  * - Derived from arch/i386/kernel/time.c
  *
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/profile.h>
+#include <linux/cnt32_to_63.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
 #include <asm/processor.h>
@@ -40,27 +41,54 @@ static struct irqaction timer_irq = {
 	.name		= "timer",
 };
 
+static unsigned long sched_clock_multiplier;
+
 /*
  * scheduler clock - returns current time in nanosec units.
  */
 unsigned long long sched_clock(void)
 {
 	union {
-		unsigned long long l;
-		u32 w[2];
-	} quot;
+		unsigned long long ll;
+		unsigned l[2];
+	} tsc64, result;
+	unsigned long tsc, tmp;
+	unsigned product[3]; /* 96-bit intermediate value */
+
+	/* read the TSC value
+	 */
+	tsc = 0 - get_cycles(); /* get_cycles() counts down */
 
-	quot.w[0] = mn10300_last_tsc - get_cycles();
-	quot.w[1] = 1000000000;
+	/* expand to 64-bits.
+	 * - sched_clock() must be called once a minute or better or the
+	 *   following will go horribly wrong - see cnt32_to_63()
+	 */
+	tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
 
-	asm("mulu %2,%3,%0,%1"
-	    : "=r"(quot.w[1]), "=r"(quot.w[0])
-	    : "0"(quot.w[1]), "1"(quot.w[0])
+	/* scale the 64-bit TSC value to a nanosecond value via a 96-bit
+	 * intermediate
+	 */
+	asm("mulu	%2,%0,%3,%0	\n"	/* LSW * mult ->  0:%3:%0 */
+	    "mulu	%2,%1,%2,%1	\n"	/* MSW * mult -> %2:%1:0 */
+	    "add	%3,%1		\n"
+	    "addc	0,%2		\n"	/* result in %2:%1:%0 */
+	    : "=r"(product[0]), "=r"(product[1]), "=r"(product[2]), "=r"(tmp)
+	    :  "0"(tsc64.l[0]),  "1"(tsc64.l[1]),  "2"(sched_clock_multiplier)
 	    : "cc");
 
-	do_div(quot.l, MN10300_TSCCLK);
+	result.l[0] = product[1] << 16 | product[0] >> 16;
+	result.l[1] = product[2] << 16 | product[1] >> 16;
 
-	return quot.l;
+	return result.ll;
+}
+
+/*
+ * initialise the scheduler clock
+ */
+static void __init mn10300_sched_clock_init(void)
+{
+	sched_clock_multiplier =
+		__muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK);
 }
 
 /*
@@ -128,4 +156,6 @@ void __init time_init(void)
 	/* start the watchdog timer */
 	watchdog_go();
 #endif
+
+	mn10300_sched_clock_init();
 }
diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c
index 14b2c81..70e8cb4 100644
--- a/arch/mn10300/unit-asb2303/unit-init.c
+++ b/arch/mn10300/unit-asb2303/unit-init.c
@@ -51,7 +51,7 @@ void __init unit_init_IRQ(void)
 		switch (GET_XIRQ_TRIGGER(extnum)) {
 		case XIRQ_TRIGGER_HILEVEL:
 		case XIRQ_TRIGGER_LOWLEVEL:
-			set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+			set_intr_postackable(XIRQ2IRQ(extnum));
 			break;
 		default:
 			break;
diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c
index 6a35241..72812a9 100644
--- a/arch/mn10300/unit-asb2305/unit-init.c
+++ b/arch/mn10300/unit-asb2305/unit-init.c
@@ -52,7 +52,7 @@ void __init unit_init_IRQ(void)
 		switch (GET_XIRQ_TRIGGER(extnum)) {
 		case XIRQ_TRIGGER_HILEVEL:
 		case XIRQ_TRIGGER_LOWLEVEL:
-			set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+			set_intr_postackable(XIRQ2IRQ(extnum));
 			break;
 		default:
 			break;
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index a7d4fd35..644a70b 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -9,6 +9,8 @@ config PARISC
 	def_bool y
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select RTC_CLASS
+	select RTC_DRV_PARISC
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
@@ -76,9 +78,6 @@ config IRQ_PER_CPU
 	bool
 	default y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 # unless you want to implement ACPI on PA-RISC ... ;-)
 config PM
 	bool
@@ -93,6 +92,8 @@ config ARCH_MAY_HAVE_PC_FDC
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 
 menu "Processor type and features"
 
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 12c04c5..bd9a4db3 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -127,9 +127,8 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i
 	buf.error = 0;
 
 	error = vfs_readdir(file, filldir, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
+	if (error >= 0)
+		error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
 		if (put_user(file->f_pos, &lastdirent->d_off))
diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild
new file mode 100644
index 0000000..f88b252
--- /dev/null
+++ b/arch/parisc/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+unifdef-y += pdc.h
diff --git a/arch/parisc/include/asm/agp.h b/arch/parisc/include/asm/agp.h
new file mode 100644
index 0000000..9651660
--- /dev/null
+++ b/arch/parisc/include/asm/agp.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_PARISC_AGP_H
+#define _ASM_PARISC_AGP_H
+
+/*
+ * PARISC specific AGP definitions.
+ * Copyright (c) 2006 Kyle McMartin <kyle@parisc-linux.org>
+ *
+ */
+
+#define map_page_into_agp(page)		/* nothing */
+#define unmap_page_from_agp(page)	/* nothing */
+#define flush_agp_cache()		mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif /* _ASM_PARISC_AGP_H */
diff --git a/arch/parisc/include/asm/asmregs.h b/arch/parisc/include/asm/asmregs.h
new file mode 100644
index 0000000..d93c646
--- /dev/null
+++ b/arch/parisc/include/asm/asmregs.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 1999 Hewlett-Packard (Frank Rowand)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2, or (at your option)
+ *	any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PARISC_ASMREGS_H
+#define _PARISC_ASMREGS_H
+
+;! General Registers
+
+rp:	.reg	%r2
+arg3:	.reg	%r23
+arg2:	.reg	%r24
+arg1:	.reg	%r25
+arg0:	.reg	%r26
+dp:	.reg	%r27
+ret0:	.reg	%r28
+ret1:	.reg	%r29
+sl:	.reg	%r29
+sp:	.reg	%r30
+
+#if 0
+/* PA20_REVISIT */
+arg7:	.reg	r19
+arg6:	.reg	r20
+arg5:	.reg	r21
+arg4:	.reg	r22
+gp:	.reg	r27
+ap:	.reg	r29
+#endif
+
+
+r0:	.reg	%r0
+r1:	.reg	%r1
+r2:	.reg	%r2
+r3:	.reg	%r3
+r4:	.reg	%r4
+r5:	.reg	%r5
+r6:	.reg	%r6
+r7:	.reg	%r7
+r8:	.reg	%r8
+r9:	.reg	%r9
+r10:	.reg	%r10
+r11:	.reg	%r11
+r12:	.reg	%r12
+r13:	.reg	%r13
+r14:	.reg	%r14
+r15:	.reg	%r15
+r16:	.reg	%r16
+r17:	.reg	%r17
+r18:	.reg	%r18
+r19:	.reg	%r19
+r20:	.reg	%r20
+r21:	.reg	%r21
+r22:	.reg	%r22
+r23:	.reg	%r23
+r24:	.reg	%r24
+r25:	.reg	%r25
+r26:	.reg	%r26
+r27:	.reg	%r27
+r28:	.reg	%r28
+r29:	.reg	%r29
+r30:	.reg	%r30
+r31:	.reg	%r31
+
+
+;! Space Registers
+
+sr0:	.reg	%sr0
+sr1:	.reg	%sr1
+sr2:	.reg	%sr2
+sr3:	.reg	%sr3
+sr4:	.reg	%sr4
+sr5:	.reg	%sr5
+sr6:	.reg	%sr6
+sr7:	.reg	%sr7
+
+
+;! Floating Point Registers
+
+fr0:	.reg	%fr0
+fr1:	.reg	%fr1
+fr2:	.reg	%fr2
+fr3:	.reg	%fr3
+fr4:	.reg	%fr4
+fr5:	.reg	%fr5
+fr6:	.reg	%fr6
+fr7:	.reg	%fr7
+fr8:	.reg	%fr8
+fr9:	.reg	%fr9
+fr10:	.reg	%fr10
+fr11:	.reg	%fr11
+fr12:	.reg	%fr12
+fr13:	.reg	%fr13
+fr14:	.reg	%fr14
+fr15:	.reg	%fr15
+fr16:	.reg	%fr16
+fr17:	.reg	%fr17
+fr18:	.reg	%fr18
+fr19:	.reg	%fr19
+fr20:	.reg	%fr20
+fr21:	.reg	%fr21
+fr22:	.reg	%fr22
+fr23:	.reg	%fr23
+fr24:	.reg	%fr24
+fr25:	.reg	%fr25
+fr26:	.reg	%fr26
+fr27:	.reg	%fr27
+fr28:	.reg	%fr28
+fr29:	.reg	%fr29
+fr30:	.reg	%fr30
+fr31:	.reg	%fr31
+
+
+;! Control Registers
+
+rctr:	.reg	%cr0
+pidr1:	.reg	%cr8
+pidr2:	.reg	%cr9
+ccr:	.reg	%cr10
+sar:	.reg	%cr11
+pidr3:	.reg	%cr12
+pidr4:	.reg	%cr13
+iva:	.reg	%cr14
+eiem:	.reg	%cr15
+itmr:	.reg	%cr16
+pcsq:	.reg	%cr17
+pcoq:	.reg	%cr18
+iir:	.reg	%cr19
+isr:	.reg	%cr20
+ior:	.reg	%cr21
+ipsw:	.reg	%cr22
+eirr:	.reg	%cr23
+tr0:	.reg	%cr24
+tr1:	.reg	%cr25
+tr2:	.reg	%cr26
+tr3:	.reg	%cr27
+tr4:	.reg	%cr28
+tr5:	.reg	%cr29
+tr6:	.reg	%cr30
+tr7:	.reg	%cr31
+
+
+cr0:	.reg	%cr0
+cr8:	.reg	%cr8
+cr9:	.reg	%cr9
+cr10:	.reg	%cr10
+cr11:	.reg	%cr11
+cr12:	.reg	%cr12
+cr13:	.reg	%cr13
+cr14:	.reg	%cr14
+cr15:	.reg	%cr15
+cr16:	.reg	%cr16
+cr17:	.reg	%cr17
+cr18:	.reg	%cr18
+cr19:	.reg	%cr19
+cr20:	.reg	%cr20
+cr21:	.reg	%cr21
+cr22:	.reg	%cr22
+cr23:	.reg	%cr23
+cr24:	.reg	%cr24
+cr25:	.reg	%cr25
+cr26:	.reg	%cr26
+cr27:	.reg	%cr27
+cr28:	.reg	%cr28
+cr29:	.reg	%cr29
+cr30:	.reg	%cr30
+cr31:	.reg	%cr31
+
+#endif
diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
new file mode 100644
index 0000000..ffb2088
--- /dev/null
+++ b/arch/parisc/include/asm/assembly.h
@@ -0,0 +1,519 @@
+/*
+ * Copyright (C) 1999 Hewlett-Packard (Frank Rowand)
+ * Copyright (C) 1999 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 1999 SuSE GmbH
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PARISC_ASSEMBLY_H
+#define _PARISC_ASSEMBLY_H
+
+#define CALLEE_FLOAT_FRAME_SIZE	80
+
+#ifdef CONFIG_64BIT
+#define LDREG	ldd
+#define STREG	std
+#define LDREGX  ldd,s
+#define LDREGM	ldd,mb
+#define STREGM	std,ma
+#define SHRREG	shrd
+#define SHLREG	shld
+#define ANDCM   andcm,*
+#define	COND(x)	* ## x
+#define RP_OFFSET	16
+#define FRAME_SIZE	128
+#define CALLEE_REG_FRAME_SIZE	144
+#define ASM_ULONG_INSN	.dword
+#else	/* CONFIG_64BIT */
+#define LDREG	ldw
+#define STREG	stw
+#define LDREGX  ldwx,s
+#define LDREGM	ldwm
+#define STREGM	stwm
+#define SHRREG	shr
+#define SHLREG	shlw
+#define ANDCM   andcm
+#define COND(x)	x
+#define RP_OFFSET	20
+#define FRAME_SIZE	64
+#define CALLEE_REG_FRAME_SIZE	128
+#define ASM_ULONG_INSN	.word
+#endif
+
+#define CALLEE_SAVE_FRAME_SIZE (CALLEE_REG_FRAME_SIZE + CALLEE_FLOAT_FRAME_SIZE)
+
+#ifdef CONFIG_PA20
+#define LDCW		ldcw,co
+#define BL		b,l
+# ifdef CONFIG_64BIT
+#  define LEVEL		2.0w
+# else
+#  define LEVEL		2.0
+# endif
+#else
+#define LDCW		ldcw
+#define BL		bl
+#define LEVEL		1.1
+#endif
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_64BIT
+/* the 64-bit pa gnu assembler unfortunately defaults to .level 1.1 or 2.0 so
+ * work around that for now... */
+	.level 2.0w
+#endif
+
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+
+#include <asm/asmregs.h>
+
+	sp	=	30
+	gp	=	27
+	ipsw	=	22
+
+	/*
+	 * We provide two versions of each macro to convert from physical
+	 * to virtual and vice versa. The "_r1" versions take one argument
+	 * register, but trashes r1 to do the conversion. The other
+	 * version takes two arguments: a src and destination register.
+	 * However, the source and destination registers can not be
+	 * the same register.
+	 */
+
+	.macro  tophys  grvirt, grphys
+	ldil    L%(__PAGE_OFFSET), \grphys
+	sub     \grvirt, \grphys, \grphys
+	.endm
+	
+	.macro  tovirt  grphys, grvirt
+	ldil    L%(__PAGE_OFFSET), \grvirt
+	add     \grphys, \grvirt, \grvirt
+	.endm
+
+	.macro  tophys_r1  gr
+	ldil    L%(__PAGE_OFFSET), %r1
+	sub     \gr, %r1, \gr
+	.endm
+	
+	.macro  tovirt_r1  gr
+	ldil    L%(__PAGE_OFFSET), %r1
+	add     \gr, %r1, \gr
+	.endm
+
+	.macro delay value
+	ldil	L%\value, 1
+	ldo	R%\value(1), 1
+	addib,UV,n -1,1,.
+	addib,NUV,n -1,1,.+8
+	nop
+	.endm
+
+	.macro	debug value
+	.endm
+
+
+	/* Shift Left - note the r and t can NOT be the same! */
+	.macro shl r, sa, t
+	dep,z	\r, 31-\sa, 32-\sa, \t
+	.endm
+
+	/* The PA 2.0 shift left */
+	.macro shlw r, sa, t
+	depw,z	\r, 31-\sa, 32-\sa, \t
+	.endm
+
+	/* And the PA 2.0W shift left */
+	.macro shld r, sa, t
+	depd,z	\r, 63-\sa, 64-\sa, \t
+	.endm
+
+	/* Shift Right - note the r and t can NOT be the same! */
+	.macro shr r, sa, t
+	extru \r, 31-\sa, 32-\sa, \t
+	.endm
+
+	/* pa20w version of shift right */
+	.macro shrd r, sa, t
+	extrd,u \r, 63-\sa, 64-\sa, \t
+	.endm
+
+	/* load 32-bit 'value' into 'reg' compensating for the ldil
+	 * sign-extension when running in wide mode.
+	 * WARNING!! neither 'value' nor 'reg' can be expressions
+	 * containing '.'!!!! */
+	.macro	load32 value, reg
+	ldil	L%\value, \reg
+	ldo	R%\value(\reg), \reg
+	.endm
+
+	.macro loadgp
+#ifdef CONFIG_64BIT
+	ldil		L%__gp, %r27
+	ldo		R%__gp(%r27), %r27
+#else
+	ldil		L%$global$, %r27
+	ldo		R%$global$(%r27), %r27
+#endif
+	.endm
+
+#define SAVE_SP(r, where) mfsp r, %r1 ! STREG %r1, where
+#define REST_SP(r, where) LDREG where, %r1 ! mtsp %r1, r
+#define SAVE_CR(r, where) mfctl r, %r1 ! STREG %r1, where
+#define REST_CR(r, where) LDREG where, %r1 ! mtctl %r1, r
+
+	.macro	save_general	regs
+	STREG %r1, PT_GR1 (\regs)
+	STREG %r2, PT_GR2 (\regs)
+	STREG %r3, PT_GR3 (\regs)
+	STREG %r4, PT_GR4 (\regs)
+	STREG %r5, PT_GR5 (\regs)
+	STREG %r6, PT_GR6 (\regs)
+	STREG %r7, PT_GR7 (\regs)
+	STREG %r8, PT_GR8 (\regs)
+	STREG %r9, PT_GR9 (\regs)
+	STREG %r10, PT_GR10(\regs)
+	STREG %r11, PT_GR11(\regs)
+	STREG %r12, PT_GR12(\regs)
+	STREG %r13, PT_GR13(\regs)
+	STREG %r14, PT_GR14(\regs)
+	STREG %r15, PT_GR15(\regs)
+	STREG %r16, PT_GR16(\regs)
+	STREG %r17, PT_GR17(\regs)
+	STREG %r18, PT_GR18(\regs)
+	STREG %r19, PT_GR19(\regs)
+	STREG %r20, PT_GR20(\regs)
+	STREG %r21, PT_GR21(\regs)
+	STREG %r22, PT_GR22(\regs)
+	STREG %r23, PT_GR23(\regs)
+	STREG %r24, PT_GR24(\regs)
+	STREG %r25, PT_GR25(\regs)
+	/* r26 is saved in get_stack and used to preserve a value across virt_map */
+	STREG %r27, PT_GR27(\regs)
+	STREG %r28, PT_GR28(\regs)
+	/* r29 is saved in get_stack and used to point to saved registers */
+	/* r30 stack pointer saved in get_stack */
+	STREG %r31, PT_GR31(\regs)
+	.endm
+
+	.macro	rest_general	regs
+	/* r1 used as a temp in rest_stack and is restored there */
+	LDREG PT_GR2 (\regs), %r2
+	LDREG PT_GR3 (\regs), %r3
+	LDREG PT_GR4 (\regs), %r4
+	LDREG PT_GR5 (\regs), %r5
+	LDREG PT_GR6 (\regs), %r6
+	LDREG PT_GR7 (\regs), %r7
+	LDREG PT_GR8 (\regs), %r8
+	LDREG PT_GR9 (\regs), %r9
+	LDREG PT_GR10(\regs), %r10
+	LDREG PT_GR11(\regs), %r11
+	LDREG PT_GR12(\regs), %r12
+	LDREG PT_GR13(\regs), %r13
+	LDREG PT_GR14(\regs), %r14
+	LDREG PT_GR15(\regs), %r15
+	LDREG PT_GR16(\regs), %r16
+	LDREG PT_GR17(\regs), %r17
+	LDREG PT_GR18(\regs), %r18
+	LDREG PT_GR19(\regs), %r19
+	LDREG PT_GR20(\regs), %r20
+	LDREG PT_GR21(\regs), %r21
+	LDREG PT_GR22(\regs), %r22
+	LDREG PT_GR23(\regs), %r23
+	LDREG PT_GR24(\regs), %r24
+	LDREG PT_GR25(\regs), %r25
+	LDREG PT_GR26(\regs), %r26
+	LDREG PT_GR27(\regs), %r27
+	LDREG PT_GR28(\regs), %r28
+	/* r29 points to register save area, and is restored in rest_stack */
+	/* r30 stack pointer restored in rest_stack */
+	LDREG PT_GR31(\regs), %r31
+	.endm
+
+	.macro	save_fp 	regs
+	fstd,ma  %fr0, 8(\regs)
+	fstd,ma	 %fr1, 8(\regs)
+	fstd,ma	 %fr2, 8(\regs)
+	fstd,ma	 %fr3, 8(\regs)
+	fstd,ma	 %fr4, 8(\regs)
+	fstd,ma	 %fr5, 8(\regs)
+	fstd,ma	 %fr6, 8(\regs)
+	fstd,ma	 %fr7, 8(\regs)
+	fstd,ma	 %fr8, 8(\regs)
+	fstd,ma	 %fr9, 8(\regs)
+	fstd,ma	%fr10, 8(\regs)
+	fstd,ma	%fr11, 8(\regs)
+	fstd,ma	%fr12, 8(\regs)
+	fstd,ma	%fr13, 8(\regs)
+	fstd,ma	%fr14, 8(\regs)
+	fstd,ma	%fr15, 8(\regs)
+	fstd,ma	%fr16, 8(\regs)
+	fstd,ma	%fr17, 8(\regs)
+	fstd,ma	%fr18, 8(\regs)
+	fstd,ma	%fr19, 8(\regs)
+	fstd,ma	%fr20, 8(\regs)
+	fstd,ma	%fr21, 8(\regs)
+	fstd,ma	%fr22, 8(\regs)
+	fstd,ma	%fr23, 8(\regs)
+	fstd,ma	%fr24, 8(\regs)
+	fstd,ma	%fr25, 8(\regs)
+	fstd,ma	%fr26, 8(\regs)
+	fstd,ma	%fr27, 8(\regs)
+	fstd,ma	%fr28, 8(\regs)
+	fstd,ma	%fr29, 8(\regs)
+	fstd,ma	%fr30, 8(\regs)
+	fstd	%fr31, 0(\regs)
+	.endm
+
+	.macro	rest_fp 	regs
+	fldd	0(\regs),	 %fr31
+	fldd,mb	-8(\regs),       %fr30
+	fldd,mb	-8(\regs),       %fr29
+	fldd,mb	-8(\regs),       %fr28
+	fldd,mb	-8(\regs),       %fr27
+	fldd,mb	-8(\regs),       %fr26
+	fldd,mb	-8(\regs),       %fr25
+	fldd,mb	-8(\regs),       %fr24
+	fldd,mb	-8(\regs),       %fr23
+	fldd,mb	-8(\regs),       %fr22
+	fldd,mb	-8(\regs),       %fr21
+	fldd,mb	-8(\regs),       %fr20
+	fldd,mb	-8(\regs),       %fr19
+	fldd,mb	-8(\regs),       %fr18
+	fldd,mb	-8(\regs),       %fr17
+	fldd,mb	-8(\regs),       %fr16
+	fldd,mb	-8(\regs),       %fr15
+	fldd,mb	-8(\regs),       %fr14
+	fldd,mb	-8(\regs),       %fr13
+	fldd,mb	-8(\regs),       %fr12
+	fldd,mb	-8(\regs),       %fr11
+	fldd,mb	-8(\regs),       %fr10
+	fldd,mb	-8(\regs),       %fr9
+	fldd,mb	-8(\regs),       %fr8
+	fldd,mb	-8(\regs),       %fr7
+	fldd,mb	-8(\regs),       %fr6
+	fldd,mb	-8(\regs),       %fr5
+	fldd,mb	-8(\regs),       %fr4
+	fldd,mb	-8(\regs),       %fr3
+	fldd,mb	-8(\regs),       %fr2
+	fldd,mb	-8(\regs),       %fr1
+	fldd,mb	-8(\regs),       %fr0
+	.endm
+
+	.macro	callee_save_float
+	fstd,ma	 %fr12,	8(%r30)
+	fstd,ma	 %fr13,	8(%r30)
+	fstd,ma	 %fr14,	8(%r30)
+	fstd,ma	 %fr15,	8(%r30)
+	fstd,ma	 %fr16,	8(%r30)
+	fstd,ma	 %fr17,	8(%r30)
+	fstd,ma	 %fr18,	8(%r30)
+	fstd,ma	 %fr19,	8(%r30)
+	fstd,ma	 %fr20,	8(%r30)
+	fstd,ma	 %fr21,	8(%r30)
+	.endm
+
+	.macro	callee_rest_float
+	fldd,mb	-8(%r30),   %fr21
+	fldd,mb	-8(%r30),   %fr20
+	fldd,mb	-8(%r30),   %fr19
+	fldd,mb	-8(%r30),   %fr18
+	fldd,mb	-8(%r30),   %fr17
+	fldd,mb	-8(%r30),   %fr16
+	fldd,mb	-8(%r30),   %fr15
+	fldd,mb	-8(%r30),   %fr14
+	fldd,mb	-8(%r30),   %fr13
+	fldd,mb	-8(%r30),   %fr12
+	.endm
+
+#ifdef CONFIG_64BIT
+	.macro	callee_save
+	std,ma	  %r3,	 CALLEE_REG_FRAME_SIZE(%r30)
+	mfctl	  %cr27, %r3
+	std	  %r4,	-136(%r30)
+	std	  %r5,	-128(%r30)
+	std	  %r6,	-120(%r30)
+	std	  %r7,	-112(%r30)
+	std	  %r8,	-104(%r30)
+	std	  %r9,	 -96(%r30)
+	std	 %r10,	 -88(%r30)
+	std	 %r11,	 -80(%r30)
+	std	 %r12,	 -72(%r30)
+	std	 %r13,	 -64(%r30)
+	std	 %r14,	 -56(%r30)
+	std	 %r15,	 -48(%r30)
+	std	 %r16,	 -40(%r30)
+	std	 %r17,	 -32(%r30)
+	std	 %r18,	 -24(%r30)
+	std	  %r3,	 -16(%r30)
+	.endm
+
+	.macro	callee_rest
+	ldd	 -16(%r30),    %r3
+	ldd	 -24(%r30),   %r18
+	ldd	 -32(%r30),   %r17
+	ldd	 -40(%r30),   %r16
+	ldd	 -48(%r30),   %r15
+	ldd	 -56(%r30),   %r14
+	ldd	 -64(%r30),   %r13
+	ldd	 -72(%r30),   %r12
+	ldd	 -80(%r30),   %r11
+	ldd	 -88(%r30),   %r10
+	ldd	 -96(%r30),    %r9
+	ldd	-104(%r30),    %r8
+	ldd	-112(%r30),    %r7
+	ldd	-120(%r30),    %r6
+	ldd	-128(%r30),    %r5
+	ldd	-136(%r30),    %r4
+	mtctl	%r3, %cr27
+	ldd,mb	-CALLEE_REG_FRAME_SIZE(%r30),    %r3
+	.endm
+
+#else /* ! CONFIG_64BIT */
+
+	.macro	callee_save
+	stw,ma	 %r3,	CALLEE_REG_FRAME_SIZE(%r30)
+	mfctl	 %cr27, %r3
+	stw	 %r4,	-124(%r30)
+	stw	 %r5,	-120(%r30)
+	stw	 %r6,	-116(%r30)
+	stw	 %r7,	-112(%r30)
+	stw	 %r8,	-108(%r30)
+	stw	 %r9,	-104(%r30)
+	stw	 %r10,	-100(%r30)
+	stw	 %r11,	 -96(%r30)
+	stw	 %r12,	 -92(%r30)
+	stw	 %r13,	 -88(%r30)
+	stw	 %r14,	 -84(%r30)
+	stw	 %r15,	 -80(%r30)
+	stw	 %r16,	 -76(%r30)
+	stw	 %r17,	 -72(%r30)
+	stw	 %r18,	 -68(%r30)
+	stw	  %r3,	 -64(%r30)
+	.endm
+
+	.macro	callee_rest
+	ldw	 -64(%r30),    %r3
+	ldw	 -68(%r30),   %r18
+	ldw	 -72(%r30),   %r17
+	ldw	 -76(%r30),   %r16
+	ldw	 -80(%r30),   %r15
+	ldw	 -84(%r30),   %r14
+	ldw	 -88(%r30),   %r13
+	ldw	 -92(%r30),   %r12
+	ldw	 -96(%r30),   %r11
+	ldw	-100(%r30),   %r10
+	ldw	-104(%r30),   %r9
+	ldw	-108(%r30),   %r8
+	ldw	-112(%r30),   %r7
+	ldw	-116(%r30),   %r6
+	ldw	-120(%r30),   %r5
+	ldw	-124(%r30),   %r4
+	mtctl	%r3, %cr27
+	ldw,mb	-CALLEE_REG_FRAME_SIZE(%r30),   %r3
+	.endm
+#endif /* ! CONFIG_64BIT */
+
+	.macro	save_specials	regs
+
+	SAVE_SP  (%sr0, PT_SR0 (\regs))
+	SAVE_SP  (%sr1, PT_SR1 (\regs))
+	SAVE_SP  (%sr2, PT_SR2 (\regs))
+	SAVE_SP  (%sr3, PT_SR3 (\regs))
+	SAVE_SP  (%sr4, PT_SR4 (\regs))
+	SAVE_SP  (%sr5, PT_SR5 (\regs))
+	SAVE_SP  (%sr6, PT_SR6 (\regs))
+	SAVE_SP  (%sr7, PT_SR7 (\regs))
+
+	SAVE_CR  (%cr17, PT_IASQ0(\regs))
+	mtctl	 %r0,	%cr17
+	SAVE_CR  (%cr17, PT_IASQ1(\regs))
+
+	SAVE_CR  (%cr18, PT_IAOQ0(\regs))
+	mtctl	 %r0,	%cr18
+	SAVE_CR  (%cr18, PT_IAOQ1(\regs))
+
+#ifdef CONFIG_64BIT
+	/* cr11 (sar) is a funny one.  5 bits on PA1.1 and 6 bit on PA2.0
+	 * For PA2.0 mtsar or mtctl always write 6 bits, but mfctl only
+	 * reads 5 bits.  Use mfctl,w to read all six bits.  Otherwise
+	 * we lose the 6th bit on a save/restore over interrupt.
+	 */
+	mfctl,w  %cr11, %r1
+	STREG    %r1, PT_SAR (\regs)
+#else
+	SAVE_CR  (%cr11, PT_SAR  (\regs))
+#endif
+	SAVE_CR  (%cr19, PT_IIR  (\regs))
+
+	/*
+	 * Code immediately following this macro (in intr_save) relies
+	 * on r8 containing ipsw.
+	 */
+	mfctl    %cr22, %r8
+	STREG    %r8,   PT_PSW(\regs)
+	.endm
+
+	.macro	rest_specials	regs
+
+	REST_SP  (%sr0, PT_SR0 (\regs))
+	REST_SP  (%sr1, PT_SR1 (\regs))
+	REST_SP  (%sr2, PT_SR2 (\regs))
+	REST_SP  (%sr3, PT_SR3 (\regs))
+	REST_SP  (%sr4, PT_SR4 (\regs))
+	REST_SP  (%sr5, PT_SR5 (\regs))
+	REST_SP  (%sr6, PT_SR6 (\regs))
+	REST_SP  (%sr7, PT_SR7 (\regs))
+
+	REST_CR	(%cr17, PT_IASQ0(\regs))
+	REST_CR	(%cr17, PT_IASQ1(\regs))
+
+	REST_CR	(%cr18, PT_IAOQ0(\regs))
+	REST_CR	(%cr18, PT_IAOQ1(\regs))
+
+	REST_CR (%cr11, PT_SAR	(\regs))
+
+	REST_CR	(%cr22, PT_PSW	(\regs))
+	.endm
+
+
+	/* First step to create a "relied upon translation"
+	 * See PA 2.0 Arch. page F-4 and F-5.
+	 *
+	 * The ssm was originally necessary due to a "PCxT bug".
+	 * But someone decided it needed to be added to the architecture
+	 * and this "feature" went into rev3 of PA-RISC 1.1 Arch Manual.
+	 * It's been carried forward into PA 2.0 Arch as well. :^(
+	 *
+	 * "ssm 0,%r0" is a NOP with side effects (prefetch barrier).
+	 * rsm/ssm prevents the ifetch unit from speculatively fetching
+	 * instructions past this line in the code stream.
+	 * PA 2.0 processor will single step all insn in the same QUAD (4 insn).
+	 */
+	.macro	pcxt_ssm_bug
+	rsm	PSW_SM_I,%r0
+	nop	/* 1 */
+	nop	/* 2 */
+	nop	/* 3 */
+	nop	/* 4 */
+	nop	/* 5 */
+	nop	/* 6 */
+	nop	/* 7 */
+	.endm
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
new file mode 100644
index 0000000..57fcc4a
--- /dev/null
+++ b/arch/parisc/include/asm/atomic.h
@@ -0,0 +1,348 @@
+/* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2006 Kyle McMartin <kyle@parisc-linux.org>
+ */
+
+#ifndef _ASM_PARISC_ATOMIC_H_
+#define _ASM_PARISC_ATOMIC_H_
+
+#include <linux/types.h>
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * And probably incredibly slow on parisc.  OTOH, we don't
+ * have to write any serious assembly.   prumpf
+ */
+
+#ifdef CONFIG_SMP
+#include <asm/spinlock.h>
+#include <asm/cache.h>		/* we use L1_CACHE_BYTES */
+
+/* Use an array of spinlocks for our atomic_ts.
+ * Hash function to index into a different SPINLOCK.
+ * Since "a" is usually an address, use one spinlock per cacheline.
+ */
+#  define ATOMIC_HASH_SIZE 4
+#  define ATOMIC_HASH(a) (&(__atomic_hash[ (((unsigned long) a)/L1_CACHE_BYTES) & (ATOMIC_HASH_SIZE-1) ]))
+
+extern raw_spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned;
+
+/* Can't use raw_spin_lock_irq because of #include problems, so
+ * this is the substitute */
+#define _atomic_spin_lock_irqsave(l,f) do {	\
+	raw_spinlock_t *s = ATOMIC_HASH(l);		\
+	local_irq_save(f);			\
+	__raw_spin_lock(s);			\
+} while(0)
+
+#define _atomic_spin_unlock_irqrestore(l,f) do {	\
+	raw_spinlock_t *s = ATOMIC_HASH(l);			\
+	__raw_spin_unlock(s);				\
+	local_irq_restore(f);				\
+} while(0)
+
+
+#else
+#  define _atomic_spin_lock_irqsave(l,f) do { local_irq_save(f); } while (0)
+#  define _atomic_spin_unlock_irqrestore(l,f) do { local_irq_restore(f); } while (0)
+#endif
+
+/* This should get optimized out since it's never called.
+** Or get a link error if xchg is used "wrong".
+*/
+extern void __xchg_called_with_bad_pointer(void);
+
+
+/* __xchg32/64 defined in arch/parisc/lib/bitops.c */
+extern unsigned long __xchg8(char, char *);
+extern unsigned long __xchg32(int, int *);
+#ifdef CONFIG_64BIT
+extern unsigned long __xchg64(unsigned long, unsigned long *);
+#endif
+
+/* optimizer better get rid of switch since size is a constant */
+static __inline__ unsigned long
+__xchg(unsigned long x, __volatile__ void * ptr, int size)
+{
+	switch(size) {
+#ifdef CONFIG_64BIT
+	case 8: return __xchg64(x,(unsigned long *) ptr);
+#endif
+	case 4: return __xchg32((int) x, (int *) ptr);
+	case 1: return __xchg8((char) x, (char *) ptr);
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+
+/*
+** REVISIT - Abandoned use of LDCW in xchg() for now:
+** o need to test sizeof(*ptr) to avoid clearing adjacent bytes
+** o and while we are at it, could CONFIG_64BIT code use LDCD too?
+**
+**	if (__builtin_constant_p(x) && (x == NULL))
+**		if (((unsigned long)p & 0xf) == 0)
+**			return __ldcw(p);
+*/
+#define xchg(ptr,x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+
+#define __HAVE_ARCH_CMPXCHG	1
+
+/* bug catcher for when unsupported size is used - won't link */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+/* __cmpxchg_u32/u64 defined in arch/parisc/lib/bitops.c */
+extern unsigned long __cmpxchg_u32(volatile unsigned int *m, unsigned int old, unsigned int new_);
+extern unsigned long __cmpxchg_u64(volatile unsigned long *ptr, unsigned long old, unsigned long new_);
+
+/* don't worry...optimizer will get rid of most of this */
+static __inline__ unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
+{
+	switch(size) {
+#ifdef CONFIG_64BIT
+	case 8: return __cmpxchg_u64((unsigned long *)ptr, old, new_);
+#endif
+	case 4: return __cmpxchg_u32((unsigned int *)ptr, (unsigned int) old, (unsigned int) new_);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+#include <asm-generic/cmpxchg-local.h>
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+				      unsigned long old,
+				      unsigned long new_, int size)
+{
+	switch (size) {
+#ifdef CONFIG_64BIT
+	case 8:	return __cmpxchg_u64((unsigned long *)ptr, old, new_);
+#endif
+	case 4:	return __cmpxchg_u32(ptr, old, new_);
+	default:
+		return __cmpxchg_local_generic(ptr, old, new_, size);
+	}
+}
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+			(unsigned long)(n), sizeof(*(ptr))))
+#ifdef CONFIG_64BIT
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+#else
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
+/* Note that we need not lock read accesses - aligned word writes/reads
+ * are atomic, so a reader never sees unconsistent values.
+ *
+ * Cache-line alignment would conflict with, for example, linux/module.h
+ */
+
+typedef struct { volatile int counter; } atomic_t;
+
+/* It's possible to reduce all atomic operations to either
+ * __atomic_add_return, atomic_set and atomic_read (the latter
+ * is there only for consistency).
+ */
+
+static __inline__ int __atomic_add_return(int i, atomic_t *v)
+{
+	int ret;
+	unsigned long flags;
+	_atomic_spin_lock_irqsave(v, flags);
+
+	ret = (v->counter += i);
+
+	_atomic_spin_unlock_irqrestore(v, flags);
+	return ret;
+}
+
+static __inline__ void atomic_set(atomic_t *v, int i) 
+{
+	unsigned long flags;
+	_atomic_spin_lock_irqsave(v, flags);
+
+	v->counter = i;
+
+	_atomic_spin_unlock_irqrestore(v, flags);
+}
+
+static __inline__ int atomic_read(const atomic_t *v)
+{
+	return v->counter;
+}
+
+/* exported interface */
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_add(i,v)	((void)(__atomic_add_return( ((int)i),(v))))
+#define atomic_sub(i,v)	((void)(__atomic_add_return(-((int)i),(v))))
+#define atomic_inc(v)	((void)(__atomic_add_return(   1,(v))))
+#define atomic_dec(v)	((void)(__atomic_add_return(  -1,(v))))
+
+#define atomic_add_return(i,v)	(__atomic_add_return( ((int)i),(v)))
+#define atomic_sub_return(i,v)	(__atomic_add_return(-((int)i),(v)))
+#define atomic_inc_return(v)	(__atomic_add_return(   1,(v)))
+#define atomic_dec_return(v)	(__atomic_add_return(  -1,(v)))
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_dec_and_test(v)	(atomic_dec_return(v) == 0)
+
+#define atomic_sub_and_test(i,v)	(atomic_sub_return((i),(v)) == 0)
+
+#define ATOMIC_INIT(i)	((atomic_t) { (i) })
+
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
+
+#ifdef CONFIG_64BIT
+
+typedef struct { volatile s64 counter; } atomic64_t;
+
+#define ATOMIC64_INIT(i) ((atomic64_t) { (i) })
+
+static __inline__ int
+__atomic64_add_return(s64 i, atomic64_t *v)
+{
+	int ret;
+	unsigned long flags;
+	_atomic_spin_lock_irqsave(v, flags);
+
+	ret = (v->counter += i);
+
+	_atomic_spin_unlock_irqrestore(v, flags);
+	return ret;
+}
+
+static __inline__ void
+atomic64_set(atomic64_t *v, s64 i)
+{
+	unsigned long flags;
+	_atomic_spin_lock_irqsave(v, flags);
+
+	v->counter = i;
+
+	_atomic_spin_unlock_irqrestore(v, flags);
+}
+
+static __inline__ s64
+atomic64_read(const atomic64_t *v)
+{
+	return v->counter;
+}
+
+#define atomic64_add(i,v)	((void)(__atomic64_add_return( ((s64)i),(v))))
+#define atomic64_sub(i,v)	((void)(__atomic64_add_return(-((s64)i),(v))))
+#define atomic64_inc(v)		((void)(__atomic64_add_return(   1,(v))))
+#define atomic64_dec(v)		((void)(__atomic64_add_return(  -1,(v))))
+
+#define atomic64_add_return(i,v)	(__atomic64_add_return( ((s64)i),(v)))
+#define atomic64_sub_return(i,v)	(__atomic64_add_return(-((s64)i),(v)))
+#define atomic64_inc_return(v)		(__atomic64_add_return(   1,(v)))
+#define atomic64_dec_return(v)		(__atomic64_add_return(  -1,(v)))
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+
+#define atomic64_inc_and_test(v) 	(atomic64_inc_return(v) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_dec_return(v) == 0)
+#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i),(v)) == 0)
+
+/* exported interface */
+#define atomic64_cmpxchg(v, o, n) \
+	((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#endif /* CONFIG_64BIT */
+
+#include <asm-generic/atomic.h>
+
+#endif /* _ASM_PARISC_ATOMIC_H_ */
diff --git a/arch/parisc/include/asm/auxvec.h b/arch/parisc/include/asm/auxvec.h
new file mode 100644
index 0000000..9c3ac4b
--- /dev/null
+++ b/arch/parisc/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMPARISC_AUXVEC_H
+#define __ASMPARISC_AUXVEC_H
+
+#endif
diff --git a/arch/parisc/include/asm/bitops.h b/arch/parisc/include/asm/bitops.h
new file mode 100644
index 0000000..7a6ea10
--- /dev/null
+++ b/arch/parisc/include/asm/bitops.h
@@ -0,0 +1,239 @@
+#ifndef _PARISC_BITOPS_H
+#define _PARISC_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/types.h>		/* for BITS_PER_LONG/SHIFT_PER_LONG */
+#include <asm/byteorder.h>
+#include <asm/atomic.h>
+
+/*
+ * HP-PARISC specific bit operations
+ * for a detailed description of the functions please refer
+ * to include/asm-i386/bitops.h or kerneldoc
+ */
+
+#define CHOP_SHIFTCOUNT(x) (((unsigned long) (x)) & (BITS_PER_LONG - 1))
+
+
+#define smp_mb__before_clear_bit()      smp_mb()
+#define smp_mb__after_clear_bit()       smp_mb()
+
+/* See http://marc.theaimsgroup.com/?t=108826637900003 for discussion
+ * on use of volatile and __*_bit() (set/clear/change):
+ *	*_bit() want use of volatile.
+ *	__*_bit() are "relaxed" and don't use spinlock or volatile.
+ */
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+{
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long flags;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	_atomic_spin_lock_irqsave(addr, flags);
+	*addr |= mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+}
+
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
+{
+	unsigned long mask = ~(1UL << CHOP_SHIFTCOUNT(nr));
+	unsigned long flags;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	_atomic_spin_lock_irqsave(addr, flags);
+	*addr &= mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+}
+
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
+{
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long flags;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	_atomic_spin_lock_irqsave(addr, flags);
+	*addr ^= mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+}
+
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long old;
+	unsigned long flags;
+	int set;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	_atomic_spin_lock_irqsave(addr, flags);
+	old = *addr;
+	set = (old & mask) ? 1 : 0;
+	if (!set)
+		*addr = old | mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+
+	return set;
+}
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
+{
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long old;
+	unsigned long flags;
+	int set;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	_atomic_spin_lock_irqsave(addr, flags);
+	old = *addr;
+	set = (old & mask) ? 1 : 0;
+	if (set)
+		*addr = old & ~mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+
+	return set;
+}
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
+{
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long oldbit;
+	unsigned long flags;
+
+	addr += (nr >> SHIFT_PER_LONG);
+	_atomic_spin_lock_irqsave(addr, flags);
+	oldbit = *addr;
+	*addr = oldbit ^ mask;
+	_atomic_spin_unlock_irqrestore(addr, flags);
+
+	return (oldbit & mask) ? 1 : 0;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#ifdef __KERNEL__
+
+/**
+ * __ffs - find first bit in word. returns 0 to "BITS_PER_LONG-1".
+ * @word: The word to search
+ *
+ * __ffs() return is undefined if no bit is set.
+ *
+ * 32-bit fast __ffs by LaMont Jones "lamont At hp com".
+ * 64-bit enhancement by Grant Grundler "grundler At parisc-linux org".
+ * (with help from willy/jejb to get the semantics right)
+ *
+ * This algorithm avoids branches by making use of nullification.
+ * One side effect of "extr" instructions is it sets PSW[N] bit.
+ * How PSW[N] (nullify next insn) gets set is determined by the 
+ * "condition" field (eg "<>" or "TR" below) in the extr* insn.
+ * Only the 1st and one of either the 2cd or 3rd insn will get executed.
+ * Each set of 3 insn will get executed in 2 cycles on PA8x00 vs 16 or so
+ * cycles for each mispredicted branch.
+ */
+
+static __inline__ unsigned long __ffs(unsigned long x)
+{
+	unsigned long ret;
+
+	__asm__(
+#ifdef CONFIG_64BIT
+		" ldi       63,%1\n"
+		" extrd,u,*<>  %0,63,32,%%r0\n"
+		" extrd,u,*TR  %0,31,32,%0\n"	/* move top 32-bits down */
+		" addi    -32,%1,%1\n"
+#else
+		" ldi       31,%1\n"
+#endif
+		" extru,<>  %0,31,16,%%r0\n"
+		" extru,TR  %0,15,16,%0\n"	/* xxxx0000 -> 0000xxxx */
+		" addi    -16,%1,%1\n"
+		" extru,<>  %0,31,8,%%r0\n"
+		" extru,TR  %0,23,8,%0\n"	/* 0000xx00 -> 000000xx */
+		" addi    -8,%1,%1\n"
+		" extru,<>  %0,31,4,%%r0\n"
+		" extru,TR  %0,27,4,%0\n"	/* 000000x0 -> 0000000x */
+		" addi    -4,%1,%1\n"
+		" extru,<>  %0,31,2,%%r0\n"
+		" extru,TR  %0,29,2,%0\n"	/* 0000000y, 1100b -> 0011b */
+		" addi    -2,%1,%1\n"
+		" extru,=  %0,31,1,%%r0\n"	/* check last bit */
+		" addi    -1,%1,%1\n"
+			: "+r" (x), "=r" (ret) );
+	return ret;
+}
+
+#include <asm-generic/bitops/ffz.h>
+
+/*
+ * ffs: find first bit set. returns 1 to BITS_PER_LONG or 0 (if none set)
+ * This is defined the same way as the libc and compiler builtin
+ * ffs routines, therefore differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+	return x ? (__ffs((unsigned long)x) + 1) : 0;
+}
+
+/*
+ * fls: find last (most significant) bit set.
+ * fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+
+static __inline__ int fls(int x)
+{
+	int ret;
+	if (!x)
+		return 0;
+
+	__asm__(
+	"	ldi		1,%1\n"
+	"	extru,<>	%0,15,16,%%r0\n"
+	"	zdep,TR		%0,15,16,%0\n"		/* xxxx0000 */
+	"	addi		16,%1,%1\n"
+	"	extru,<>	%0,7,8,%%r0\n"
+	"	zdep,TR		%0,23,24,%0\n"		/* xx000000 */
+	"	addi		8,%1,%1\n"
+	"	extru,<>	%0,3,4,%%r0\n"
+	"	zdep,TR		%0,27,28,%0\n"		/* x0000000 */
+	"	addi		4,%1,%1\n"
+	"	extru,<>	%0,1,2,%%r0\n"
+	"	zdep,TR		%0,29,30,%0\n"		/* y0000000 (y&3 = 0) */
+	"	addi		2,%1,%1\n"
+	"	extru,=		%0,0,1,%%r0\n"
+	"	addi		1,%1,%1\n"		/* if y & 8, add 1 */
+		: "+r" (x), "=r" (ret) );
+
+	return ret;
+}
+
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/sched.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+/* '3' is bits per byte */
+#define LE_BYTE_ADDR ((sizeof(unsigned long) - 1) << 3)
+
+#define ext2_set_bit_atomic(l,nr,addr) \
+		test_and_set_bit((nr)   ^ LE_BYTE_ADDR, (unsigned long *)addr)
+#define ext2_clear_bit_atomic(l,nr,addr) \
+		test_and_clear_bit( (nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+
+#endif	/* __KERNEL__ */
+
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* _PARISC_BITOPS_H */
diff --git a/arch/parisc/include/asm/bug.h b/arch/parisc/include/asm/bug.h
new file mode 100644
index 0000000..8cfc553
--- /dev/null
+++ b/arch/parisc/include/asm/bug.h
@@ -0,0 +1,92 @@
+#ifndef _PARISC_BUG_H
+#define _PARISC_BUG_H
+
+/*
+ * Tell the user there is some problem.
+ * The offending file and line are encoded in the __bug_table section.
+ */
+
+#ifdef CONFIG_BUG
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
+
+/* the break instruction is used as BUG() marker.  */
+#define	PARISC_BUG_BREAK_ASM	"break 0x1f, 0x1fff"
+#define	PARISC_BUG_BREAK_INSN	0x03ffe01f  /* PARISC_BUG_BREAK_ASM */
+
+#if defined(CONFIG_64BIT)
+#define ASM_WORD_INSN		".dword\t"
+#else
+#define ASM_WORD_INSN		".word\t"
+#endif
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define BUG()								\
+	do {								\
+		asm volatile("\n"					\
+			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
+			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "2:\t" ASM_WORD_INSN "1b, %c0\n"		\
+			     "\t.short %c1, %c2\n"			\
+			     "\t.org 2b+%c3\n"				\
+			     "\t.popsection"				\
+			     : : "i" (__FILE__), "i" (__LINE__),	\
+			     "i" (0), "i" (sizeof(struct bug_entry)) ); \
+		for(;;) ;						\
+	} while(0)
+
+#else
+#define BUG()								\
+	do {								\
+		asm volatile(PARISC_BUG_BREAK_ASM : : );		\
+		for(;;) ;						\
+	} while(0)
+#endif
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define __WARN()							\
+	do {								\
+		asm volatile("\n"					\
+			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
+			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "2:\t" ASM_WORD_INSN "1b, %c0\n"		\
+			     "\t.short %c1, %c2\n"			\
+			     "\t.org 2b+%c3\n"				\
+			     "\t.popsection"				\
+			     : : "i" (__FILE__), "i" (__LINE__),	\
+			     "i" (BUGFLAG_WARNING),			\
+			     "i" (sizeof(struct bug_entry)) );		\
+	} while(0)
+#else
+#define __WARN()							\
+	do {								\
+		asm volatile("\n"					\
+			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
+			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "2:\t" ASM_WORD_INSN "1b\n"		\
+			     "\t.short %c0\n"				\
+			     "\t.org 2b+%c1\n"				\
+			     "\t.popsection"				\
+			     : : "i" (BUGFLAG_WARNING),			\
+			     "i" (sizeof(struct bug_entry)) );		\
+	} while(0)
+#endif
+
+
+#define WARN_ON(x) ({						\
+	int __ret_warn_on = !!(x);				\
+	if (__builtin_constant_p(__ret_warn_on)) {		\
+		if (__ret_warn_on)				\
+			__WARN();				\
+	} else {						\
+		if (unlikely(__ret_warn_on))			\
+			__WARN();				\
+	}							\
+	unlikely(__ret_warn_on);				\
+})
+
+#endif
+
+#include <asm-generic/bug.h>
+#endif
+
diff --git a/arch/parisc/include/asm/bugs.h b/arch/parisc/include/asm/bugs.h
new file mode 100644
index 0000000..9e6284342
--- /dev/null
+++ b/arch/parisc/include/asm/bugs.h
@@ -0,0 +1,19 @@
+/*
+ *  include/asm-parisc/bugs.h
+ *
+ *  Copyright (C) 1999	Mike Shaver
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+#include <asm/processor.h>
+
+static inline void check_bugs(void)
+{
+//	identify_cpu(&boot_cpu_data);
+}
diff --git a/arch/parisc/include/asm/byteorder.h b/arch/parisc/include/asm/byteorder.h
new file mode 100644
index 0000000..db14831
--- /dev/null
+++ b/arch/parisc/include/asm/byteorder.h
@@ -0,0 +1,82 @@
+#ifndef _PARISC_BYTEORDER_H
+#define _PARISC_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+	__asm__("dep %0, 15, 8, %0\n\t"		/* deposit 00ab -> 0bab */
+		"shd %%r0, %0, 8, %0"		/* shift 000000ab -> 00ba */
+		: "=r" (x)
+		: "0" (x));
+	return x;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab24(__u32 x)
+{
+	__asm__("shd %0, %0, 8, %0\n\t"		/* shift xabcxabc -> cxab */
+		"dep %0, 15, 8, %0\n\t"		/* deposit cxab -> cbab */
+		"shd %%r0, %0, 8, %0"		/* shift 0000cbab -> 0cba */
+		: "=r" (x)
+		: "0" (x));
+	return x;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	unsigned int temp;
+	__asm__("shd %0, %0, 16, %1\n\t"	/* shift abcdabcd -> cdab */
+		"dep %1, 15, 8, %1\n\t"		/* deposit cdab -> cbab */
+		"shd %0, %1, 8, %0"		/* shift abcdcbab -> dcba */
+		: "=r" (x), "=&r" (temp)
+		: "0" (x));
+	return x;
+}
+
+
+#if BITS_PER_LONG > 32
+/*
+** From "PA-RISC 2.0 Architecture", HP Professional Books.
+** See Appendix I page 8 , "Endian Byte Swapping".
+**
+** Pretty cool algorithm: (* == zero'd bits)
+**      PERMH   01234567 -> 67452301 into %0
+**      HSHL    67452301 -> 7*5*3*1* into %1
+**      HSHR    67452301 -> *6*4*2*0 into %0
+**      OR      %0 | %1  -> 76543210 into %0 (all done!)
+*/
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x) {
+	__u64 temp;
+	__asm__("permh,3210 %0, %0\n\t"
+		"hshl %0, 8, %1\n\t"
+		"hshr,u %0, 8, %0\n\t"
+		"or %1, %0, %0"
+		: "=r" (x), "=&r" (temp)
+		: "0" (x));
+	return x;
+}
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __BYTEORDER_HAS_U64__
+#elif !defined(__STRICT_ANSI__)
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+{
+	__u32 t1 = ___arch__swab32((__u32) x);
+	__u32 t2 = ___arch__swab32((__u32) (x >> 32));
+	return (((__u64) t1 << 32) | t2);
+}
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __BYTEORDER_HAS_U64__
+#endif
+
+#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch__swab24(x) ___arch__swab24(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _PARISC_BYTEORDER_H */
diff --git a/arch/parisc/include/asm/cache.h b/arch/parisc/include/asm/cache.h
new file mode 100644
index 0000000..32c2cca
--- /dev/null
+++ b/arch/parisc/include/asm/cache.h
@@ -0,0 +1,60 @@
+/*
+ * include/asm-parisc/cache.h
+ */
+
+#ifndef __ARCH_PARISC_CACHE_H
+#define __ARCH_PARISC_CACHE_H
+
+
+/*
+ * PA 2.0 processors have 64-byte cachelines; PA 1.1 processors have
+ * 32-byte cachelines.  The default configuration is not for SMP anyway,
+ * so if you're building for SMP, you should select the appropriate
+ * processor type.  There is a potential livelock danger when running
+ * a machine with this value set too small, but it's more probable you'll
+ * just ruin performance.
+ */
+#ifdef CONFIG_PA20
+#define L1_CACHE_BYTES 64
+#define L1_CACHE_SHIFT 6
+#else
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_SHIFT 5
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define L1_CACHE_ALIGN(x)       (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+void parisc_cache_init(void);	/* initializes cache-flushing */
+void disable_sr_hashing_asm(int); /* low level support for above */
+void disable_sr_hashing(void);   /* turns off space register hashing */
+void free_sid(unsigned long);
+unsigned long alloc_sid(void);
+
+struct seq_file;
+extern void show_cache_info(struct seq_file *m);
+
+extern int split_tlb;
+extern int dcache_stride;
+extern int icache_stride;
+extern struct pdc_cache_info cache_info;
+void parisc_setup_cache_timing(void);
+
+#define pdtlb(addr)         asm volatile("pdtlb 0(%%sr1,%0)" : : "r" (addr));
+#define pitlb(addr)         asm volatile("pitlb 0(%%sr1,%0)" : : "r" (addr));
+#define pdtlb_kernel(addr)  asm volatile("pdtlb 0(%0)" : : "r" (addr));
+
+#endif /* ! __ASSEMBLY__ */
+
+/* Classes of processor wrt: disabling space register hashing */
+
+#define SRHASH_PCXST    0   /* pcxs, pcxt, pcxt_ */
+#define SRHASH_PCXL     1   /* pcxl */
+#define SRHASH_PA20     2   /* pcxu, pcxu_, pcxw, pcxw_ */
+
+#endif
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
new file mode 100644
index 0000000..b7ca6dc
--- /dev/null
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -0,0 +1,121 @@
+#ifndef _PARISC_CACHEFLUSH_H
+#define _PARISC_CACHEFLUSH_H
+
+#include <linux/mm.h>
+
+/* The usual comment is "Caches aren't brain-dead on the <architecture>".
+ * Unfortunately, that doesn't apply to PA-RISC. */
+
+/* Internal implementation */
+void flush_data_cache_local(void *);  /* flushes local data-cache only */
+void flush_instruction_cache_local(void *); /* flushes local code-cache only */
+#ifdef CONFIG_SMP
+void flush_data_cache(void); /* flushes data-cache only (all processors) */
+void flush_instruction_cache(void); /* flushes i-cache only (all processors) */
+#else
+#define flush_data_cache() flush_data_cache_local(NULL)
+#define flush_instruction_cache() flush_instruction_cache_local(NULL)
+#endif
+
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
+void flush_user_icache_range_asm(unsigned long, unsigned long);
+void flush_kernel_icache_range_asm(unsigned long, unsigned long);
+void flush_user_dcache_range_asm(unsigned long, unsigned long);
+void flush_kernel_dcache_range_asm(unsigned long, unsigned long);
+void flush_kernel_dcache_page_asm(void *);
+void flush_kernel_icache_page(void *);
+void flush_user_dcache_page(unsigned long);
+void flush_user_icache_page(unsigned long);
+void flush_user_dcache_range(unsigned long, unsigned long);
+void flush_user_icache_range(unsigned long, unsigned long);
+
+/* Cache flush operations */
+
+void flush_cache_all_local(void);
+void flush_cache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+
+#define flush_kernel_dcache_range(start,size) \
+	flush_kernel_dcache_range_asm((start), (start)+(size));
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+extern void flush_dcache_page(struct page *page);
+
+#define flush_dcache_mmap_lock(mapping) \
+	spin_lock_irq(&(mapping)->tree_lock)
+#define flush_dcache_mmap_unlock(mapping) \
+	spin_unlock_irq(&(mapping)->tree_lock)
+
+#define flush_icache_page(vma,page)	do { 		\
+	flush_kernel_dcache_page(page);			\
+	flush_kernel_icache_page(page_address(page)); 	\
+} while (0)
+
+#define flush_icache_range(s,e)		do { 		\
+	flush_kernel_dcache_range_asm(s,e); 		\
+	flush_kernel_icache_range_asm(s,e); 		\
+} while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { \
+	flush_cache_page(vma, vaddr, page_to_pfn(page)); \
+	memcpy(dst, src, len); \
+	flush_kernel_dcache_range_asm((unsigned long)dst, (unsigned long)dst + len); \
+} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+do { \
+	flush_cache_page(vma, vaddr, page_to_pfn(page)); \
+	memcpy(dst, src, len); \
+} while (0)
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn);
+void flush_cache_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end);
+
+#define ARCH_HAS_FLUSH_ANON_PAGE
+static inline void
+flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr)
+{
+	if (PageAnon(page))
+		flush_user_dcache_page(vmaddr);
+}
+
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+void flush_kernel_dcache_page_addr(void *addr);
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	flush_kernel_dcache_page_addr(page_address(page));
+}
+
+#ifdef CONFIG_DEBUG_RODATA
+void mark_rodata_ro(void);
+#endif
+
+#ifdef CONFIG_PA8X00
+/* Only pa8800, pa8900 needs this */
+#define ARCH_HAS_KMAP
+
+void kunmap_parisc(void *addr);
+
+static inline void *kmap(struct page *page)
+{
+	might_sleep();
+	return page_address(page);
+}
+
+#define kunmap(page)			kunmap_parisc(page_address(page))
+
+#define kmap_atomic(page, idx)		page_address(page)
+
+#define kunmap_atomic(addr, idx)	kunmap_parisc(addr)
+
+#define kmap_atomic_pfn(pfn, idx)	page_address(pfn_to_page(pfn))
+#define kmap_atomic_to_page(ptr)	virt_to_page(ptr)
+#endif
+
+#endif /* _PARISC_CACHEFLUSH_H */
+
diff --git a/arch/parisc/include/asm/checksum.h b/arch/parisc/include/asm/checksum.h
new file mode 100644
index 0000000..e9639cc
--- /dev/null
+++ b/arch/parisc/include/asm/checksum.h
@@ -0,0 +1,210 @@
+#ifndef _PARISC_CHECKSUM_H
+#define _PARISC_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *, int, __wsum);
+
+/*
+ * The same as csum_partial, but copies from src while it checksums.
+ *
+ * Here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_nocheck(const void *, void *, int, __wsum);
+
+/*
+ * this is a new version of the above that records errors it finds in *errp,
+ * but continues and zeros the rest of the buffer.
+ */
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+		void *dst, int len, __wsum sum, int *errp);
+
+/*
+ *	Optimized for IP headers, which always checksum on 4 octet boundaries.
+ *
+ *	Written by Randolph Chung <tausq@debian.org>, and then mucked with by
+ *	LaMont Jones <lamont@debian.org>
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum;
+
+	__asm__ __volatile__ (
+"	ldws,ma		4(%1), %0\n"
+"	addib,<=	-4, %2, 2f\n"
+"\n"
+"	ldws		4(%1), %%r20\n"
+"	ldws		8(%1), %%r21\n"
+"	add		%0, %%r20, %0\n"
+"	ldws,ma		12(%1), %%r19\n"
+"	addc		%0, %%r21, %0\n"
+"	addc		%0, %%r19, %0\n"
+"1:	ldws,ma		4(%1), %%r19\n"
+"	addib,<		0, %2, 1b\n"
+"	addc		%0, %%r19, %0\n"
+"\n"
+"	extru		%0, 31, 16, %%r20\n"
+"	extru		%0, 15, 16, %%r21\n"
+"	addc		%%r20, %%r21, %0\n"
+"	extru		%0, 15, 16, %%r21\n"
+"	add		%0, %%r21, %0\n"
+"	subi		-1, %0, %0\n"
+"2:\n"
+	: "=r" (sum), "=r" (iph), "=r" (ihl)
+	: "1" (iph), "2" (ihl)
+	: "r19", "r20", "r21", "memory");
+
+	return (__force __sum16)sum;
+}
+
+/*
+ *	Fold a partial checksum
+ */
+static inline __sum16 csum_fold(__wsum csum)
+{
+	u32 sum = (__force u32)csum;
+	/* add the swapped two 16-bit halves of sum,
+	   a possible carry from adding the two 16-bit halves,
+	   will carry from the lower half into the upper half,
+	   giving us the correct sum in the upper half. */
+	sum += (sum << 16) + (sum >> 16);
+	return (__force __sum16)(~sum >> 16);
+}
+ 
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					       unsigned short len,
+					       unsigned short proto,
+					       __wsum sum)
+{
+	__asm__(
+	"	add  %1, %0, %0\n"
+	"	addc %2, %0, %0\n"
+	"	addc %3, %0, %0\n"
+	"	addc %%r0, %0, %0\n"
+		: "=r" (sum)
+		: "r" (daddr), "r"(saddr), "r"(proto+len), "0"(sum));
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buf, int len)
+{
+	 return csum_fold (csum_partial(buf, len, 0));
+}
+
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+					  const struct in6_addr *daddr,
+					  __u32 len, unsigned short proto,
+					  __wsum sum)
+{
+	__asm__ __volatile__ (
+
+#if BITS_PER_LONG > 32
+
+	/*
+	** We can execute two loads and two adds per cycle on PA 8000.
+	** But add insn's get serialized waiting for the carry bit.
+	** Try to keep 4 registers with "live" values ahead of the ALU.
+	*/
+
+"	ldd,ma		8(%1), %%r19\n"	/* get 1st saddr word */
+"	ldd,ma		8(%2), %%r20\n"	/* get 1st daddr word */
+"	add		%8, %3, %3\n"/* add 16-bit proto + len */
+"	add		%%r19, %0, %0\n"
+"	ldd,ma		8(%1), %%r21\n"	/* 2cd saddr */
+"	ldd,ma		8(%2), %%r22\n"	/* 2cd daddr */
+"	add,dc		%%r20, %0, %0\n"
+"	add,dc		%%r21, %0, %0\n"
+"	add,dc		%%r22, %0, %0\n"
+"	add,dc		%3, %0, %0\n"  /* fold in proto+len | carry bit */
+"	extrd,u		%0, 31, 32, %%r19\n"	/* copy upper half down */
+"	depdi		0, 31, 32, %0\n"	/* clear upper half */
+"	add		%%r19, %0, %0\n"	/* fold into 32-bits */
+"	addc		0, %0, %0\n"		/* add carry */
+
+#else
+
+	/*
+	** For PA 1.x, the insn order doesn't matter as much.
+	** Insn stream is serialized on the carry bit here too.
+	** result from the previous operation (eg r0 + x)
+	*/
+
+"	ldw,ma		4(%1), %%r19\n"	/* get 1st saddr word */
+"	ldw,ma		4(%2), %%r20\n"	/* get 1st daddr word */
+"	add		%8, %3, %3\n"	/* add 16-bit proto + len */
+"	add		%%r19, %0, %0\n"
+"	ldw,ma		4(%1), %%r21\n"	/* 2cd saddr */
+"	addc		%%r20, %0, %0\n"
+"	ldw,ma		4(%2), %%r22\n"	/* 2cd daddr */
+"	addc		%%r21, %0, %0\n"
+"	ldw,ma		4(%1), %%r19\n"	/* 3rd saddr */
+"	addc		%%r22, %0, %0\n"
+"	ldw,ma		4(%2), %%r20\n"	/* 3rd daddr */
+"	addc		%%r19, %0, %0\n"
+"	ldw,ma		4(%1), %%r21\n"	/* 4th saddr */
+"	addc		%%r20, %0, %0\n"
+"	ldw,ma		4(%2), %%r22\n"	/* 4th daddr */
+"	addc		%%r21, %0, %0\n"
+"	addc		%%r22, %0, %0\n"
+"	addc		%3, %0, %0\n"	/* fold in proto+len, catch carry */
+
+#endif
+	: "=r" (sum), "=r" (saddr), "=r" (daddr), "=r" (len)
+	: "0" (sum), "1" (saddr), "2" (daddr), "3" (len), "r" (proto)
+	: "r19", "r20", "r21", "r22");
+	return csum_fold(sum);
+}
+
+/* 
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static __inline__ __wsum csum_and_copy_to_user(const void *src,
+						      void __user *dst,
+						      int len, __wsum sum,
+						      int *err_ptr)
+{
+	/* code stolen from include/asm-mips64 */
+	sum = csum_partial(src, len, sum);
+	 
+	if (copy_to_user(dst, src, len)) {
+		*err_ptr = -EFAULT;
+		return (__force __wsum)-1;
+	}
+
+	return sum;
+}
+
+#endif
+
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
new file mode 100644
index 0000000..7f32611
--- /dev/null
+++ b/arch/parisc/include/asm/compat.h
@@ -0,0 +1,165 @@
+#ifndef _ASM_PARISC_COMPAT_H
+#define _ASM_PARISC_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/thread_info.h>
+
+#define COMPAT_USER_HZ 100
+
+typedef u32	compat_size_t;
+typedef s32	compat_ssize_t;
+typedef s32	compat_time_t;
+typedef s32	compat_clock_t;
+typedef s32	compat_pid_t;
+typedef u32	__compat_uid_t;
+typedef u32	__compat_gid_t;
+typedef u32	__compat_uid32_t;
+typedef u32	__compat_gid32_t;
+typedef u16	compat_mode_t;
+typedef u32	compat_ino_t;
+typedef u32	compat_dev_t;
+typedef s32	compat_off_t;
+typedef s64	compat_loff_t;
+typedef u16	compat_nlink_t;
+typedef u16	compat_ipc_pid_t;
+typedef s32	compat_daddr_t;
+typedef u32	compat_caddr_t;
+typedef s32	compat_timer_t;
+
+typedef s32	compat_int_t;
+typedef s32	compat_long_t;
+typedef s64	compat_s64;
+typedef u32	compat_uint_t;
+typedef u32	compat_ulong_t;
+typedef u64	compat_u64;
+
+struct compat_timespec {
+	compat_time_t		tv_sec;
+	s32			tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t		tv_sec;
+	s32			tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t		st_dev;	/* dev_t is 32 bits on parisc */
+	compat_ino_t		st_ino;	/* 32 bits */
+	compat_mode_t		st_mode;	/* 16 bits */
+	compat_nlink_t  	st_nlink;	/* 16 bits */
+	u16			st_reserved1;	/* old st_uid */
+	u16			st_reserved2;	/* old st_gid */
+	compat_dev_t		st_rdev;
+	compat_off_t		st_size;
+	compat_time_t		st_atime;
+	u32			st_atime_nsec;
+	compat_time_t		st_mtime;
+	u32			st_mtime_nsec;
+	compat_time_t		st_ctime;
+	u32			st_ctime_nsec;
+	s32			st_blksize;
+	s32			st_blocks;
+	u32			__unused1;	/* ACL stuff */
+	compat_dev_t		__unused2;	/* network */
+	compat_ino_t		__unused3;	/* network */
+	u32			__unused4;	/* cnodes */
+	u16			__unused5;	/* netsite */
+	short			st_fstype;
+	compat_dev_t		st_realdev;
+	u16			st_basemode;
+	u16			st_spareshort;
+	__compat_uid32_t	st_uid;
+	__compat_gid32_t	st_gid;
+	u32			st_spare4[3];
+};
+
+struct compat_flock {
+	short			l_type;
+	short			l_whence;
+	compat_off_t		l_start;
+	compat_off_t		l_len;
+	compat_pid_t		l_pid;
+};
+
+struct compat_flock64 {
+	short			l_type;
+	short			l_whence;
+	compat_loff_t		l_start;
+	compat_loff_t		l_len;
+	compat_pid_t		l_pid;
+};
+
+struct compat_statfs {
+	s32		f_type;
+	s32		f_bsize;
+	s32		f_blocks;
+	s32		f_bfree;
+	s32		f_bavail;
+	s32		f_files;
+	s32		f_ffree;
+	__kernel_fsid_t	f_fsid;
+	s32		f_namelen;
+	s32		f_frsize;
+	s32		f_spare[5];
+};
+
+struct compat_sigcontext {
+	compat_int_t sc_flags;
+	compat_int_t sc_gr[32]; /* PSW in sc_gr[0] */
+	u64 sc_fr[32];
+	compat_int_t sc_iasq[2];
+	compat_int_t sc_iaoq[2];
+	compat_int_t sc_sar; /* cr11 */
+};
+
+#define COMPAT_RLIM_INFINITY 0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static __inline__ void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = &current->thread.regs;
+	return (void __user *)regs->gr[30];
+}
+
+static inline int __is_compat_task(struct task_struct *t)
+{
+	return test_ti_thread_flag(task_thread_info(t), TIF_32BIT);
+}
+
+static inline int is_compat_task(void)
+{
+	return __is_compat_task(current);
+}
+
+#endif /* _ASM_PARISC_COMPAT_H */
diff --git a/arch/parisc/include/asm/compat_rt_sigframe.h b/arch/parisc/include/asm/compat_rt_sigframe.h
new file mode 100644
index 0000000..81bec28
--- /dev/null
+++ b/arch/parisc/include/asm/compat_rt_sigframe.h
@@ -0,0 +1,50 @@
+#include<linux/compat.h>
+#include<linux/compat_siginfo.h>
+#include<asm/compat_ucontext.h>
+
+#ifndef _ASM_PARISC_COMPAT_RT_SIGFRAME_H
+#define _ASM_PARISC_COMPAT_RT_SIGFRAME_H
+
+/* In a deft move of uber-hackery, we decide to carry the top half of all
+ * 64-bit registers in a non-portable, non-ABI, hidden structure.
+ * Userspace can read the hidden structure if it *wants* but is never
+ * guaranteed to be in the same place. Infact the uc_sigmask from the 
+ * ucontext_t structure may push the hidden register file downards
+ */
+struct compat_regfile {
+	/* Upper half of all the 64-bit registers that were truncated
+	   on a copy to a 32-bit userspace */
+	compat_int_t rf_gr[32];
+	compat_int_t rf_iasq[2];
+	compat_int_t rf_iaoq[2];
+	compat_int_t rf_sar;
+};
+
+#define COMPAT_SIGRETURN_TRAMP 4
+#define COMPAT_SIGRESTARTBLOCK_TRAMP 5 
+#define COMPAT_TRAMP_SIZE (COMPAT_SIGRETURN_TRAMP + COMPAT_SIGRESTARTBLOCK_TRAMP)
+
+struct compat_rt_sigframe {
+	/* XXX: Must match trampoline size in arch/parisc/kernel/signal.c 
+	        Secondary to that it must protect the ERESTART_RESTARTBLOCK
+		trampoline we left on the stack (we were bad and didn't 
+		change sp so we could run really fast.) */
+	compat_uint_t tramp[COMPAT_TRAMP_SIZE];
+	compat_siginfo_t info;
+	struct compat_ucontext uc;
+	/* Hidden location of truncated registers, *must* be last. */
+	struct compat_regfile regs; 
+};
+
+/*
+ * The 32-bit ABI wants at least 48 bytes for a function call frame:
+ * 16 bytes for arg0-arg3, and 32 bytes for magic (the only part of
+ * which Linux/parisc uses is sp-20 for the saved return pointer...)
+ * Then, the stack pointer must be rounded to a cache line (64 bytes).
+ */
+#define SIGFRAME32		64
+#define FUNCTIONCALLFRAME32	48
+#define PARISC_RT_SIGFRAME_SIZE32					\
+	(((sizeof(struct compat_rt_sigframe) + FUNCTIONCALLFRAME32) + SIGFRAME32) & -SIGFRAME32)
+
+#endif
diff --git a/arch/parisc/include/asm/compat_signal.h b/arch/parisc/include/asm/compat_signal.h
new file mode 100644
index 0000000..6ad02c3
--- /dev/null
+++ b/arch/parisc/include/asm/compat_signal.h
@@ -0,0 +1,2 @@
+/* Use generic */
+#include <asm-generic/compat_signal.h>
diff --git a/arch/parisc/include/asm/compat_ucontext.h b/arch/parisc/include/asm/compat_ucontext.h
new file mode 100644
index 0000000..2f7292a
--- /dev/null
+++ b/arch/parisc/include/asm/compat_ucontext.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_PARISC_COMPAT_UCONTEXT_H
+#define _ASM_PARISC_COMPAT_UCONTEXT_H
+
+#include <linux/compat.h>
+
+/* 32-bit ucontext as seen from an 64-bit kernel */
+struct compat_ucontext {
+	compat_uint_t uc_flags;
+	compat_uptr_t uc_link;
+	compat_stack_t uc_stack;	/* struct compat_sigaltstack (12 bytes)*/	
+	/* FIXME: Pad out to get uc_mcontext to start at an 8-byte aligned boundary */
+	compat_uint_t pad[1];
+	struct compat_sigcontext uc_mcontext;
+	compat_sigset_t uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASM_PARISC_COMPAT_UCONTEXT_H */
diff --git a/arch/parisc/include/asm/cputime.h b/arch/parisc/include/asm/cputime.h
new file mode 100644
index 0000000..dcdf2fb
--- /dev/null
+++ b/arch/parisc/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __PARISC_CPUTIME_H
+#define __PARISC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __PARISC_CPUTIME_H */
diff --git a/arch/parisc/include/asm/current.h b/arch/parisc/include/asm/current.h
new file mode 100644
index 0000000..0fb9338
--- /dev/null
+++ b/arch/parisc/include/asm/current.h
@@ -0,0 +1,15 @@
+#ifndef _PARISC_CURRENT_H
+#define _PARISC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+ 
+#define current get_current()
+
+#endif /* !(_PARISC_CURRENT_H) */
diff --git a/arch/parisc/include/asm/delay.h b/arch/parisc/include/asm/delay.h
new file mode 100644
index 0000000..7a75e98
--- /dev/null
+++ b/arch/parisc/include/asm/delay.h
@@ -0,0 +1,43 @@
+#ifndef _PARISC_DELAY_H
+#define _PARISC_DELAY_H
+
+#include <asm/system.h>    /* for mfctl() */
+#include <asm/processor.h> /* for boot_cpu_data */
+
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines
+ */
+
+static __inline__ void __delay(unsigned long loops) {
+	asm volatile(
+	"	.balignl	64,0x34000034\n"
+	"	addib,UV -1,%0,.\n"
+	"	nop\n"
+		: "=r" (loops) : "0" (loops));
+}
+
+static __inline__ void __cr16_delay(unsigned long clocks) {
+	unsigned long start;
+
+	/*
+	 * Note: Due to unsigned math, cr16 rollovers shouldn't be
+	 * a problem here. However, on 32 bit, we need to make sure
+	 * we don't pass in too big a value. The current default
+	 * value of MAX_UDELAY_MS should help prevent this.
+	 */
+
+	start = mfctl(16);
+	while ((mfctl(16) - start) < clocks)
+	    ;
+}
+
+static __inline__ void __udelay(unsigned long usecs) {
+	__cr16_delay(usecs * ((unsigned long)boot_cpu_data.cpu_hz / 1000000UL));
+}
+
+#define udelay(n) __udelay(n)
+
+#endif /* defined(_PARISC_DELAY_H) */
diff --git a/arch/parisc/include/asm/device.h b/arch/parisc/include/asm/device.h
new file mode 100644
index 0000000..d8f9872
--- /dev/null
+++ b/arch/parisc/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/parisc/include/asm/div64.h b/arch/parisc/include/asm/div64.h
new file mode 100644
index 0000000..6cd978c
--- /dev/null
+++ b/arch/parisc/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h
new file mode 100644
index 0000000..53af696
--- /dev/null
+++ b/arch/parisc/include/asm/dma-mapping.h
@@ -0,0 +1,253 @@
+#ifndef _PARISC_DMA_MAPPING_H
+#define _PARISC_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <asm/cacheflush.h>
+#include <asm/scatterlist.h>
+
+/* See Documentation/DMA-mapping.txt */
+struct hppa_dma_ops {
+	int  (*dma_supported)(struct device *dev, u64 mask);
+	void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag);
+	void *(*alloc_noncoherent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag);
+	void (*free_consistent)(struct device *dev, size_t size, void *vaddr, dma_addr_t iova);
+	dma_addr_t (*map_single)(struct device *dev, void *addr, size_t size, enum dma_data_direction direction);
+	void (*unmap_single)(struct device *dev, dma_addr_t iova, size_t size, enum dma_data_direction direction);
+	int  (*map_sg)(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction);
+	void (*unmap_sg)(struct device *dev, struct scatterlist *sg, int nhwents, enum dma_data_direction direction);
+	void (*dma_sync_single_for_cpu)(struct device *dev, dma_addr_t iova, unsigned long offset, size_t size, enum dma_data_direction direction);
+	void (*dma_sync_single_for_device)(struct device *dev, dma_addr_t iova, unsigned long offset, size_t size, enum dma_data_direction direction);
+	void (*dma_sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction direction);
+	void (*dma_sync_sg_for_device)(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction direction);
+};
+
+/*
+** We could live without the hppa_dma_ops indirection if we didn't want
+** to support 4 different coherent dma models with one binary (they will
+** someday be loadable modules):
+**     I/O MMU        consistent method           dma_sync behavior
+**  =============   ======================       =======================
+**  a) PA-7x00LC    uncachable host memory          flush/purge
+**  b) U2/Uturn      cachable host memory              NOP
+**  c) Ike/Astro     cachable host memory              NOP
+**  d) EPIC/SAGA     memory on EPIC/SAGA         flush/reset DMA channel
+**
+** PA-7[13]00LC processors have a GSC bus interface and no I/O MMU.
+**
+** Systems (eg PCX-T workstations) that don't fall into the above
+** categories will need to modify the needed drivers to perform
+** flush/purge and allocate "regular" cacheable pages for everything.
+*/
+
+#ifdef CONFIG_PA11
+extern struct hppa_dma_ops pcxl_dma_ops;
+extern struct hppa_dma_ops pcx_dma_ops;
+#endif
+
+extern struct hppa_dma_ops *hppa_dma_ops;
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   gfp_t flag)
+{
+	return hppa_dma_ops->alloc_consistent(dev, size, dma_handle, flag);
+}
+
+static inline void *
+dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		      gfp_t flag)
+{
+	return hppa_dma_ops->alloc_noncoherent(dev, size, dma_handle, flag);
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, 
+		    void *vaddr, dma_addr_t dma_handle)
+{
+	hppa_dma_ops->free_consistent(dev, size, vaddr, dma_handle);
+}
+
+static inline void
+dma_free_noncoherent(struct device *dev, size_t size, 
+		    void *vaddr, dma_addr_t dma_handle)
+{
+	hppa_dma_ops->free_consistent(dev, size, vaddr, dma_handle);
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction)
+{
+	return hppa_dma_ops->map_single(dev, ptr, size, direction);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	hppa_dma_ops->unmap_single(dev, dma_addr, size, direction);
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	return hppa_dma_ops->map_sg(dev, sg, nents, direction);
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	hppa_dma_ops->unmap_sg(dev, sg, nhwentries, direction);
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+	     size_t size, enum dma_data_direction direction)
+{
+	return dma_map_single(dev, (page_address(page) + (offset)), size, direction);
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_single_for_cpu)
+		hppa_dma_ops->dma_sync_single_for_cpu(dev, dma_handle, 0, size, direction);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_single_for_device)
+		hppa_dma_ops->dma_sync_single_for_device(dev, dma_handle, 0, size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+		      unsigned long offset, size_t size,
+		      enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_single_for_cpu)
+		hppa_dma_ops->dma_sync_single_for_cpu(dev, dma_handle, offset, size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+		      unsigned long offset, size_t size,
+		      enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_single_for_device)
+		hppa_dma_ops->dma_sync_single_for_device(dev, dma_handle, offset, size, direction);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		 enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_sg_for_cpu)
+		hppa_dma_ops->dma_sync_sg_for_cpu(dev, sg, nelems, direction);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		 enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_sg_for_device)
+		hppa_dma_ops->dma_sync_sg_for_device(dev, sg, nelems, direction);
+}
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	return hppa_dma_ops->dma_supported(dev, mask);
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 mask)
+{
+	if(!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	return dcache_stride;
+}
+
+static inline int
+dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
+{
+	return (hppa_dma_ops->dma_sync_single_for_cpu == NULL);
+}
+
+static inline void
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	       enum dma_data_direction direction)
+{
+	if(hppa_dma_ops->dma_sync_single_for_cpu)
+		flush_kernel_dcache_range((unsigned long)vaddr, size);
+}
+
+static inline void *
+parisc_walk_tree(struct device *dev)
+{
+	struct device *otherdev;
+	if(likely(dev->platform_data != NULL))
+		return dev->platform_data;
+	/* OK, just traverse the bus to find it */
+	for(otherdev = dev->parent; otherdev;
+	    otherdev = otherdev->parent) {
+		if(otherdev->platform_data) {
+			dev->platform_data = otherdev->platform_data;
+			break;
+		}
+	}
+	BUG_ON(!dev->platform_data);
+	return dev->platform_data;
+}
+		
+#define GET_IOC(dev) (HBA_DATA(parisc_walk_tree(dev))->iommu);	
+	
+
+#ifdef CONFIG_IOMMU_CCIO
+struct parisc_device;
+struct ioc;
+void * ccio_get_iommu(const struct parisc_device *dev);
+int ccio_request_resource(const struct parisc_device *dev,
+		struct resource *res);
+int ccio_allocate_resource(const struct parisc_device *dev,
+		struct resource *res, unsigned long size,
+		unsigned long min, unsigned long max, unsigned long align);
+#else /* !CONFIG_IOMMU_CCIO */
+#define ccio_get_iommu(dev) NULL
+#define ccio_request_resource(dev, res) insert_resource(&iomem_resource, res)
+#define ccio_allocate_resource(dev, res, size, min, max, align) \
+		allocate_resource(&iomem_resource, res, size, min, max, \
+				align, NULL, NULL)
+#endif /* !CONFIG_IOMMU_CCIO */
+
+#ifdef CONFIG_IOMMU_SBA
+struct parisc_device;
+void * sba_get_iommu(struct parisc_device *dev);
+#endif
+
+/* At the moment, we panic on error for IOMMU resource exaustion */
+#define dma_mapping_error(dev, x)	0
+
+#endif
diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h
new file mode 100644
index 0000000..31ad0f0
--- /dev/null
+++ b/arch/parisc/include/asm/dma.h
@@ -0,0 +1,186 @@
+/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ * (c) Copyright 2000, Grant Grundler
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/io.h>		/* need byte IO */
+#include <asm/system.h>	
+
+#define dma_outb	outb
+#define dma_inb		inb
+
+/*
+** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up
+** (or rather not merge) DMAs into manageable chunks.
+** On parisc, this is more of the software/tuning constraint
+** rather than the HW. I/O MMU allocation algorithms can be
+** faster with smaller sizes (to some degree).
+*/
+#define DMA_CHUNK_SIZE	(BITS_PER_LONG*PAGE_SIZE)
+
+/* The maximum address that we can perform a DMA transfer to on this platform
+** New dynamic DMA interfaces should obsolete this....
+*/
+#define MAX_DMA_ADDRESS (~0UL)
+
+/*
+** We don't have DMA channels... well V-class does but the
+** Dynamic DMA Mapping interface will support them... right? :^)
+** Note: this is not relevant right now for PA-RISC, but we cannot 
+** leave this as undefined because some things (e.g. sound)
+** won't compile :-(
+*/
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0	/* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+#define DMA1_EXT_MODE_REG	(0x400 | DMA1_MODE_REG)
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+#define DMA2_EXT_MODE_REG	(0x400 | DMA2_MODE_REG)
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	return 0;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+	
+	return (dmanr<=3)? count : (count<<1);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+#ifdef CONFIG_SUPERIO
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+#endif
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+#ifdef CONFIG_SUPERIO
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+#endif
+}
+
+/* reserve a DMA channel */
+#define request_dma(dmanr, device_id)	(0)
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+}
+
+
+#define free_dma(dmanr)
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/parisc/include/asm/eisa_bus.h b/arch/parisc/include/asm/eisa_bus.h
new file mode 100644
index 0000000..201085f
--- /dev/null
+++ b/arch/parisc/include/asm/eisa_bus.h
@@ -0,0 +1,23 @@
+/*
+ * eisa_bus.h interface between the eisa BA driver and the bus enumerator
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (c) 2002 Daniel Engstrom <5116@telia.com>
+ *
+ */
+
+#ifndef ASM_EISA_H
+#define ASM_EISA_H
+
+extern void eisa_make_irq_level(int num);
+extern void eisa_make_irq_edge(int num);
+extern int eisa_enumerator(unsigned long eeprom_addr,
+			   struct resource *io_parent, 
+			   struct resource *mem_parent);
+extern int eisa_eeprom_init(unsigned long addr);
+
+#endif
diff --git a/arch/parisc/include/asm/eisa_eeprom.h b/arch/parisc/include/asm/eisa_eeprom.h
new file mode 100644
index 0000000..9c9da98
--- /dev/null
+++ b/arch/parisc/include/asm/eisa_eeprom.h
@@ -0,0 +1,153 @@
+/*
+ * eisa_eeprom.h - provide support for EISA adapters in PA-RISC machines
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (c) 2001, 2002 Daniel Engstrom <5116@telia.com>
+ *
+ */
+
+#ifndef ASM_EISA_EEPROM_H
+#define ASM_EISA_EEPROM_H
+
+extern void __iomem *eisa_eeprom_addr;
+
+#define HPEE_MAX_LENGTH       0x2000	/* maximum eeprom length */
+
+#define HPEE_SLOT_INFO(slot) (20+(48*slot))
+
+struct eeprom_header 
+{
+   
+	u_int32_t num_writes;       /* number of writes */
+ 	u_int8_t  flags;            /* flags, usage? */
+	u_int8_t  ver_maj;
+	u_int8_t  ver_min;
+	u_int8_t  num_slots;        /* number of EISA slots in system */
+	u_int16_t csum;             /* checksum, I don't know how to calulate this */
+	u_int8_t  pad[10];
+} __attribute__ ((packed));
+
+
+struct eeprom_eisa_slot_info
+{
+	u_int32_t eisa_slot_id;
+	u_int32_t config_data_offset;
+	u_int32_t num_writes;
+	u_int16_t csum;
+	u_int16_t num_functions;
+	u_int16_t config_data_length;
+	
+	/* bits 0..3 are the duplicate slot id */ 
+#define HPEE_SLOT_INFO_EMBEDDED  0x10
+#define HPEE_SLOT_INFO_VIRTUAL   0x20
+#define HPEE_SLOT_INFO_NO_READID 0x40
+#define HPEE_SLOT_INFO_DUPLICATE 0x80
+	u_int8_t slot_info;
+	
+#define HPEE_SLOT_FEATURES_ENABLE         0x01
+#define HPEE_SLOT_FEATURES_IOCHK          0x02
+#define HPEE_SLOT_FEATURES_CFG_INCOMPLETE 0x80
+	u_int8_t slot_features;
+	
+	u_int8_t  ver_min;
+	u_int8_t  ver_maj;
+	
+#define HPEE_FUNCTION_INFO_HAVE_TYPE      0x01
+#define HPEE_FUNCTION_INFO_HAVE_MEMORY    0x02
+#define HPEE_FUNCTION_INFO_HAVE_IRQ       0x04
+#define HPEE_FUNCTION_INFO_HAVE_DMA       0x08
+#define HPEE_FUNCTION_INFO_HAVE_PORT      0x10
+#define HPEE_FUNCTION_INFO_HAVE_PORT_INIT 0x20
+/* I think there are two slighty different 
+ * versions of the function_info field 
+ * one int the fixed header and one optional 
+ * in the parsed slot data area */
+#define HPEE_FUNCTION_INFO_HAVE_FUNCTION  0x01
+#define HPEE_FUNCTION_INFO_F_DISABLED     0x80
+#define HPEE_FUNCTION_INFO_CFG_FREE_FORM  0x40
+	u_int8_t  function_info;
+
+#define HPEE_FLAG_BOARD_IS_ISA		  0x01 /* flag and minor version for isa board */
+	u_int8_t  flags;
+	u_int8_t  pad[24];
+} __attribute__ ((packed));
+
+
+#define HPEE_MEMORY_MAX_ENT   9
+/* memory descriptor: byte 0 */
+#define HPEE_MEMORY_WRITABLE  0x01
+#define HPEE_MEMORY_CACHABLE  0x02
+#define HPEE_MEMORY_TYPE_MASK 0x18
+#define HPEE_MEMORY_TYPE_SYS  0x00
+#define HPEE_MEMORY_TYPE_EXP  0x08
+#define HPEE_MEMORY_TYPE_VIR  0x10
+#define HPEE_MEMORY_TYPE_OTH  0x18
+#define HPEE_MEMORY_SHARED    0x20
+#define HPEE_MEMORY_MORE      0x80
+
+/* memory descriptor: byte 1 */
+#define HPEE_MEMORY_WIDTH_MASK 0x03
+#define HPEE_MEMORY_WIDTH_BYTE 0x00
+#define HPEE_MEMORY_WIDTH_WORD 0x01
+#define HPEE_MEMORY_WIDTH_DWORD 0x02
+#define HPEE_MEMORY_DECODE_MASK 0x0c
+#define HPEE_MEMORY_DECODE_20BITS 0x00
+#define HPEE_MEMORY_DECODE_24BITS 0x04
+#define HPEE_MEMORY_DECODE_32BITS 0x08
+/* byte 2 and 3 are a 16bit LE value
+ * containging the memory size in kilobytes */
+/* byte 4,5,6 are a 24bit LE value
+ * containing the memory base address */
+
+
+#define HPEE_IRQ_MAX_ENT      7
+/* Interrupt entry: byte 0 */
+#define HPEE_IRQ_CHANNEL_MASK 0xf
+#define HPEE_IRQ_TRIG_LEVEL   0x20
+#define HPEE_IRQ_MORE         0x80
+/* byte 1 seems to be unused */
+
+#define HPEE_DMA_MAX_ENT     4
+
+/* dma entry: byte 0 */
+#define HPEE_DMA_CHANNEL_MASK 7
+#define HPEE_DMA_SIZE_MASK	0xc
+#define HPEE_DMA_SIZE_BYTE	0x0
+#define HPEE_DMA_SIZE_WORD	0x4
+#define HPEE_DMA_SIZE_DWORD	0x8
+#define HPEE_DMA_SHARED      0x40
+#define HPEE_DMA_MORE        0x80
+
+/* dma entry: byte 1 */
+#define HPEE_DMA_TIMING_MASK 0x30
+#define HPEE_DMA_TIMING_ISA	0x0
+#define HPEE_DMA_TIMING_TYPEA 0x10
+#define HPEE_DMA_TIMING_TYPEB 0x20
+#define HPEE_DMA_TIMING_TYPEC 0x30
+
+#define HPEE_PORT_MAX_ENT 20
+/* port entry byte 0 */
+#define HPEE_PORT_SIZE_MASK 0x1f
+#define HPEE_PORT_SHARED    0x40
+#define HPEE_PORT_MORE      0x80
+/* byte 1 and 2 is a 16bit LE value
+ * conating the start port number */
+
+#define HPEE_PORT_INIT_MAX_LEN     60 /* in bytes here */
+/* port init entry byte 0 */
+#define HPEE_PORT_INIT_WIDTH_MASK  0x3
+#define HPEE_PORT_INIT_WIDTH_BYTE  0x0
+#define HPEE_PORT_INIT_WIDTH_WORD  0x1
+#define HPEE_PORT_INIT_WIDTH_DWORD 0x2
+#define HPEE_PORT_INIT_MASK        0x4
+#define HPEE_PORT_INIT_MORE        0x80
+
+#define HPEE_SELECTION_MAX_ENT 26
+
+#define HPEE_TYPE_MAX_LEN    80
+
+#endif
diff --git a/arch/parisc/include/asm/elf.h b/arch/parisc/include/asm/elf.h
new file mode 100644
index 0000000..7fa6757
--- /dev/null
+++ b/arch/parisc/include/asm/elf.h
@@ -0,0 +1,342 @@
+#ifndef __ASMPARISC_ELF_H
+#define __ASMPARISC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+
+#define EM_PARISC 15
+
+/* HPPA specific definitions.  */
+
+/* Legal values for e_flags field of Elf32_Ehdr.  */
+
+#define EF_PARISC_TRAPNIL	0x00010000 /* Trap nil pointer dereference.  */
+#define EF_PARISC_EXT		0x00020000 /* Program uses arch. extensions. */
+#define EF_PARISC_LSB		0x00040000 /* Program expects little endian. */
+#define EF_PARISC_WIDE		0x00080000 /* Program expects wide mode.  */
+#define EF_PARISC_NO_KABP	0x00100000 /* No kernel assisted branch
+					      prediction.  */
+#define EF_PARISC_LAZYSWAP	0x00400000 /* Allow lazy swapping.  */
+#define EF_PARISC_ARCH		0x0000ffff /* Architecture version.  */
+
+/* Defined values for `e_flags & EF_PARISC_ARCH' are:  */
+
+#define EFA_PARISC_1_0		    0x020b /* PA-RISC 1.0 big-endian.  */
+#define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
+#define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
+
+/* Additional section indices.  */
+
+#define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
+					      symbols in ANSI C.  */
+#define SHN_PARISC_HUGE_COMMON	0xff01	   /* Common blocks in huge model.  */
+
+/* Legal values for sh_type field of Elf32_Shdr.  */
+
+#define SHT_PARISC_EXT		0x70000000 /* Contains product specific ext. */
+#define SHT_PARISC_UNWIND	0x70000001 /* Unwind information.  */
+#define SHT_PARISC_DOC		0x70000002 /* Debug info for optimized code. */
+
+/* Legal values for sh_flags field of Elf32_Shdr.  */
+
+#define SHF_PARISC_SHORT	0x20000000 /* Section with short addressing. */
+#define SHF_PARISC_HUGE		0x40000000 /* Section far from gp.  */
+#define SHF_PARISC_SBP		0x80000000 /* Static branch prediction code. */
+
+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
+
+#define STT_PARISC_MILLICODE	13	/* Millicode function entry point.  */
+
+#define STT_HP_OPAQUE		(STT_LOOS + 0x1)
+#define STT_HP_STUB		(STT_LOOS + 0x2)
+
+/* HPPA relocs.  */
+
+#define R_PARISC_NONE		0	/* No reloc.  */
+#define R_PARISC_DIR32		1	/* Direct 32-bit reference.  */
+#define R_PARISC_DIR21L		2	/* Left 21 bits of eff. address.  */
+#define R_PARISC_DIR17R		3	/* Right 17 bits of eff. address.  */
+#define R_PARISC_DIR17F		4	/* 17 bits of eff. address.  */
+#define R_PARISC_DIR14R		6	/* Right 14 bits of eff. address.  */
+#define R_PARISC_PCREL32	9	/* 32-bit rel. address.  */
+#define R_PARISC_PCREL21L	10	/* Left 21 bits of rel. address.  */
+#define R_PARISC_PCREL17R	11	/* Right 17 bits of rel. address.  */
+#define R_PARISC_PCREL17F	12	/* 17 bits of rel. address.  */
+#define R_PARISC_PCREL14R	14	/* Right 14 bits of rel. address.  */
+#define R_PARISC_DPREL21L	18	/* Left 21 bits of rel. address.  */
+#define R_PARISC_DPREL14R	22	/* Right 14 bits of rel. address.  */
+#define R_PARISC_GPREL21L	26	/* GP-relative, left 21 bits.  */
+#define R_PARISC_GPREL14R	30	/* GP-relative, right 14 bits.  */
+#define R_PARISC_LTOFF21L	34	/* LT-relative, left 21 bits.  */
+#define R_PARISC_LTOFF14R	38	/* LT-relative, right 14 bits.  */
+#define R_PARISC_SECREL32	41	/* 32 bits section rel. address.  */
+#define R_PARISC_SEGBASE	48	/* No relocation, set segment base.  */
+#define R_PARISC_SEGREL32	49	/* 32 bits segment rel. address.  */
+#define R_PARISC_PLTOFF21L	50	/* PLT rel. address, left 21 bits.  */
+#define R_PARISC_PLTOFF14R	54	/* PLT rel. address, right 14 bits.  */
+#define R_PARISC_LTOFF_FPTR32	57	/* 32 bits LT-rel. function pointer. */
+#define R_PARISC_LTOFF_FPTR21L	58	/* LT-rel. fct ptr, left 21 bits. */
+#define R_PARISC_LTOFF_FPTR14R	62	/* LT-rel. fct ptr, right 14 bits. */
+#define R_PARISC_FPTR64		64	/* 64 bits function address.  */
+#define R_PARISC_PLABEL32	65	/* 32 bits function address.  */
+#define R_PARISC_PCREL64	72	/* 64 bits PC-rel. address.  */
+#define R_PARISC_PCREL22F	74	/* 22 bits PC-rel. address.  */
+#define R_PARISC_PCREL14WR	75	/* PC-rel. address, right 14 bits.  */
+#define R_PARISC_PCREL14DR	76	/* PC rel. address, right 14 bits.  */
+#define R_PARISC_PCREL16F	77	/* 16 bits PC-rel. address.  */
+#define R_PARISC_PCREL16WF	78	/* 16 bits PC-rel. address.  */
+#define R_PARISC_PCREL16DF	79	/* 16 bits PC-rel. address.  */
+#define R_PARISC_DIR64		80	/* 64 bits of eff. address.  */
+#define R_PARISC_DIR14WR	83	/* 14 bits of eff. address.  */
+#define R_PARISC_DIR14DR	84	/* 14 bits of eff. address.  */
+#define R_PARISC_DIR16F		85	/* 16 bits of eff. address.  */
+#define R_PARISC_DIR16WF	86	/* 16 bits of eff. address.  */
+#define R_PARISC_DIR16DF	87	/* 16 bits of eff. address.  */
+#define R_PARISC_GPREL64	88	/* 64 bits of GP-rel. address.  */
+#define R_PARISC_GPREL14WR	91	/* GP-rel. address, right 14 bits.  */
+#define R_PARISC_GPREL14DR	92	/* GP-rel. address, right 14 bits.  */
+#define R_PARISC_GPREL16F	93	/* 16 bits GP-rel. address.  */
+#define R_PARISC_GPREL16WF	94	/* 16 bits GP-rel. address.  */
+#define R_PARISC_GPREL16DF	95	/* 16 bits GP-rel. address.  */
+#define R_PARISC_LTOFF64	96	/* 64 bits LT-rel. address.  */
+#define R_PARISC_LTOFF14WR	99	/* LT-rel. address, right 14 bits.  */
+#define R_PARISC_LTOFF14DR	100	/* LT-rel. address, right 14 bits.  */
+#define R_PARISC_LTOFF16F	101	/* 16 bits LT-rel. address.  */
+#define R_PARISC_LTOFF16WF	102	/* 16 bits LT-rel. address.  */
+#define R_PARISC_LTOFF16DF	103	/* 16 bits LT-rel. address.  */
+#define R_PARISC_SECREL64	104	/* 64 bits section rel. address.  */
+#define R_PARISC_SEGREL64	112	/* 64 bits segment rel. address.  */
+#define R_PARISC_PLTOFF14WR	115	/* PLT-rel. address, right 14 bits.  */
+#define R_PARISC_PLTOFF14DR	116	/* PLT-rel. address, right 14 bits.  */
+#define R_PARISC_PLTOFF16F	117	/* 16 bits LT-rel. address.  */
+#define R_PARISC_PLTOFF16WF	118	/* 16 bits PLT-rel. address.  */
+#define R_PARISC_PLTOFF16DF	119	/* 16 bits PLT-rel. address.  */
+#define R_PARISC_LTOFF_FPTR64	120	/* 64 bits LT-rel. function ptr.  */
+#define R_PARISC_LTOFF_FPTR14WR	123	/* LT-rel. fct. ptr., right 14 bits. */
+#define R_PARISC_LTOFF_FPTR14DR	124	/* LT-rel. fct. ptr., right 14 bits. */
+#define R_PARISC_LTOFF_FPTR16F	125	/* 16 bits LT-rel. function ptr.  */
+#define R_PARISC_LTOFF_FPTR16WF	126	/* 16 bits LT-rel. function ptr.  */
+#define R_PARISC_LTOFF_FPTR16DF	127	/* 16 bits LT-rel. function ptr.  */
+#define R_PARISC_LORESERVE	128
+#define R_PARISC_COPY		128	/* Copy relocation.  */
+#define R_PARISC_IPLT		129	/* Dynamic reloc, imported PLT */
+#define R_PARISC_EPLT		130	/* Dynamic reloc, exported PLT */
+#define R_PARISC_TPREL32	153	/* 32 bits TP-rel. address.  */
+#define R_PARISC_TPREL21L	154	/* TP-rel. address, left 21 bits.  */
+#define R_PARISC_TPREL14R	158	/* TP-rel. address, right 14 bits.  */
+#define R_PARISC_LTOFF_TP21L	162	/* LT-TP-rel. address, left 21 bits. */
+#define R_PARISC_LTOFF_TP14R	166	/* LT-TP-rel. address, right 14 bits.*/
+#define R_PARISC_LTOFF_TP14F	167	/* 14 bits LT-TP-rel. address.  */
+#define R_PARISC_TPREL64	216	/* 64 bits TP-rel. address.  */
+#define R_PARISC_TPREL14WR	219	/* TP-rel. address, right 14 bits.  */
+#define R_PARISC_TPREL14DR	220	/* TP-rel. address, right 14 bits.  */
+#define R_PARISC_TPREL16F	221	/* 16 bits TP-rel. address.  */
+#define R_PARISC_TPREL16WF	222	/* 16 bits TP-rel. address.  */
+#define R_PARISC_TPREL16DF	223	/* 16 bits TP-rel. address.  */
+#define R_PARISC_LTOFF_TP64	224	/* 64 bits LT-TP-rel. address.  */
+#define R_PARISC_LTOFF_TP14WR	227	/* LT-TP-rel. address, right 14 bits.*/
+#define R_PARISC_LTOFF_TP14DR	228	/* LT-TP-rel. address, right 14 bits.*/
+#define R_PARISC_LTOFF_TP16F	229	/* 16 bits LT-TP-rel. address.  */
+#define R_PARISC_LTOFF_TP16WF	230	/* 16 bits LT-TP-rel. address.  */
+#define R_PARISC_LTOFF_TP16DF	231	/* 16 bits LT-TP-rel. address.  */
+#define R_PARISC_HIRESERVE	255
+
+#define PA_PLABEL_FDESC		0x02	/* bit set if PLABEL points to
+					 * a function descriptor, not
+					 * an address */
+
+/* The following are PA function descriptors 
+ *
+ * addr:	the absolute address of the function
+ * gp:		either the data pointer (r27) for non-PIC code or the
+ *		the PLT pointer (r19) for PIC code */
+
+/* Format for the Elf32 Function descriptor */
+typedef struct elf32_fdesc {
+	__u32	addr;
+	__u32	gp;
+} Elf32_Fdesc;
+
+/* Format for the Elf64 Function descriptor */
+typedef struct elf64_fdesc {
+	__u64	dummy[2]; /* FIXME: nothing uses these, why waste
+			   * the space */
+	__u64	addr;
+	__u64	gp;
+} Elf64_Fdesc;
+
+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr.  */
+
+#define PT_HP_TLS		(PT_LOOS + 0x0)
+#define PT_HP_CORE_NONE		(PT_LOOS + 0x1)
+#define PT_HP_CORE_VERSION	(PT_LOOS + 0x2)
+#define PT_HP_CORE_KERNEL	(PT_LOOS + 0x3)
+#define PT_HP_CORE_COMM		(PT_LOOS + 0x4)
+#define PT_HP_CORE_PROC		(PT_LOOS + 0x5)
+#define PT_HP_CORE_LOADABLE	(PT_LOOS + 0x6)
+#define PT_HP_CORE_STACK	(PT_LOOS + 0x7)
+#define PT_HP_CORE_SHM		(PT_LOOS + 0x8)
+#define PT_HP_CORE_MMF		(PT_LOOS + 0x9)
+#define PT_HP_PARALLEL		(PT_LOOS + 0x10)
+#define PT_HP_FASTBIND		(PT_LOOS + 0x11)
+#define PT_HP_OPT_ANNOT		(PT_LOOS + 0x12)
+#define PT_HP_HSL_ANNOT		(PT_LOOS + 0x13)
+#define PT_HP_STACK		(PT_LOOS + 0x14)
+
+#define PT_PARISC_ARCHEXT	0x70000000
+#define PT_PARISC_UNWIND	0x70000001
+
+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr.  */
+
+#define PF_PARISC_SBP		0x08000000
+
+#define PF_HP_PAGE_SIZE		0x00100000
+#define PF_HP_FAR_SHARED	0x00200000
+#define PF_HP_NEAR_SHARED	0x00400000
+#define PF_HP_CODE		0x01000000
+#define PF_HP_MODIFY		0x02000000
+#define PF_HP_LAZYSWAP		0x04000000
+#define PF_HP_SBP		0x08000000
+
+/*
+ * The following definitions are those for 32-bit ELF binaries on a 32-bit
+ * kernel and for 64-bit binaries on a 64-bit kernel.  To run 32-bit binaries
+ * on a 64-bit kernel, arch/parisc/kernel/binfmt_elf32.c defines these
+ * macros appropriately and then #includes binfmt_elf.c, which then includes
+ * this file.
+ */
+#ifndef ELF_CLASS
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ *
+ * Note that this header file is used by default in fs/binfmt_elf.c. So
+ * the following macros are for the default case. However, for the 64
+ * bit kernel we also support 32 bit parisc binaries. To do that
+ * arch/parisc/kernel/binfmt_elf32.c defines its own set of these
+ * macros, and then it includes fs/binfmt_elf.c to provide an alternate
+ * elf binary handler for 32 bit binaries (on the 64 bit kernel).
+ */
+#ifdef CONFIG_64BIT
+#define ELF_CLASS   ELFCLASS64
+#else
+#define ELF_CLASS	ELFCLASS32
+#endif
+
+typedef unsigned long elf_greg_t;
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
+
+#define ELF_PLATFORM  ("PARISC\0")
+
+#define SET_PERSONALITY(ex) \
+	current->personality = PER_LINUX; \
+	current->thread.map_base = DEFAULT_MAP_BASE; \
+	current->thread.task_size = DEFAULT_TASK_SIZE \
+
+/*
+ * Fill in general registers in a core dump.  This saves pretty
+ * much the same registers as hp-ux, although in a different order.
+ * Registers marked # below are not currently saved in pt_regs, so
+ * we use their current values here.
+ *
+ * 	gr0..gr31
+ * 	sr0..sr7
+ * 	iaoq0..iaoq1
+ * 	iasq0..iasq1
+ * 	cr11 (sar)
+ * 	cr19 (iir)
+ * 	cr20 (isr)
+ * 	cr21 (ior)
+ *  #	cr22 (ipsw)
+ *  #	cr0 (recovery counter)
+ *  #	cr24..cr31 (temporary registers)
+ *  #	cr8,9,12,13 (protection IDs)
+ *  #	cr10 (scr/ccr)
+ *  #	cr15 (ext int enable mask)
+ *
+ */
+
+#define ELF_CORE_COPY_REGS(dst, pt)	\
+	memset(dst, 0, sizeof(dst));	/* don't leak any "random" bits */ \
+	memcpy(dst + 0, pt->gr, 32 * sizeof(elf_greg_t)); \
+	memcpy(dst + 32, pt->sr, 8 * sizeof(elf_greg_t)); \
+	memcpy(dst + 40, pt->iaoq, 2 * sizeof(elf_greg_t)); \
+	memcpy(dst + 42, pt->iasq, 2 * sizeof(elf_greg_t)); \
+	dst[44] = pt->sar;   dst[45] = pt->iir; \
+	dst[46] = pt->isr;   dst[47] = pt->ior; \
+	dst[48] = mfctl(22); dst[49] = mfctl(0); \
+	dst[50] = mfctl(24); dst[51] = mfctl(25); \
+	dst[52] = mfctl(26); dst[53] = mfctl(27); \
+	dst[54] = mfctl(28); dst[55] = mfctl(29); \
+	dst[56] = mfctl(30); dst[57] = mfctl(31); \
+	dst[58] = mfctl( 8); dst[59] = mfctl( 9); \
+	dst[60] = mfctl(12); dst[61] = mfctl(13); \
+	dst[62] = mfctl(10); dst[63] = mfctl(15);
+
+#endif /* ! ELF_CLASS */
+
+#define ELF_NGREG 80	/* We only need 64 at present, but leave space
+			   for expansion. */
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_NFPREG 32
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+struct task_struct;
+
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+struct pt_regs;	/* forward declaration... */
+
+
+#define elf_check_arch(x) ((x)->e_machine == EM_PARISC && (x)->e_ident[EI_CLASS] == ELF_CLASS)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_PARISC
+#define ELF_OSABI 	ELFOSABI_LINUX
+
+/* %r23 is set by ld.so to a pointer to a function which might be 
+   registered using atexit.  This provides a means for the dynamic
+   linker to call DT_FINI functions for shared libraries that have
+   been loaded before the code runs.
+
+   So that we can use the same startup file with static executables,
+   we start programs with a value of 0 to indicate that there is no
+   such function.  */
+#define ELF_PLAT_INIT(_r, load_addr)       _r->gr[23] = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.
+
+   (2 * TASK_SIZE / 3) turns into something undefined when run through a
+   32 bit preprocessor and in some cases results in the kernel trying to map
+   ld.so to the kernel virtual base. Use a sane value instead. /Jes 
+  */
+
+#define ELF_ET_DYN_BASE         (TASK_UNMAPPED_BASE + 0x01000000)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	0
+
+#endif
diff --git a/arch/parisc/include/asm/emergency-restart.h b/arch/parisc/include/asm/emergency-restart.h
new file mode 100644
index 0000000..108d8c4
--- /dev/null
+++ b/arch/parisc/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/parisc/include/asm/errno.h b/arch/parisc/include/asm/errno.h
new file mode 100644
index 0000000..e2f3ddc
--- /dev/null
+++ b/arch/parisc/include/asm/errno.h
@@ -0,0 +1,124 @@
+#ifndef _PARISC_ERRNO_H
+#define _PARISC_ERRNO_H
+
+#include <asm-generic/errno-base.h>
+
+#define	ENOMSG		35	/* No message of desired type */
+#define	EIDRM		36	/* Identifier removed */
+#define	ECHRNG		37	/* Channel number out of range */
+#define	EL2NSYNC	38	/* Level 2 not synchronized */
+#define	EL3HLT		39	/* Level 3 halted */
+#define	EL3RST		40	/* Level 3 reset */
+#define	ELNRNG		41	/* Link number out of range */
+#define	EUNATCH		42	/* Protocol driver not attached */
+#define	ENOCSI		43	/* No CSI structure available */
+#define	EL2HLT		44	/* Level 2 halted */
+#define	EDEADLK		45	/* Resource deadlock would occur */
+#define	EDEADLOCK	EDEADLK
+#define	ENOLCK		46	/* No record locks available */
+#define	EILSEQ		47	/* Illegal byte sequence */
+
+#define	ENONET		50	/* Machine is not on the network */
+#define	ENODATA		51	/* No data available */
+#define	ETIME		52	/* Timer expired */
+#define	ENOSR		53	/* Out of streams resources */
+#define	ENOSTR		54	/* Device not a stream */
+#define	ENOPKG		55	/* Package not installed */
+
+#define	ENOLINK		57	/* Link has been severed */
+#define	EADV		58	/* Advertise error */
+#define	ESRMNT		59	/* Srmount error */
+#define	ECOMM		60	/* Communication error on send */
+#define	EPROTO		61	/* Protocol error */
+
+#define	EMULTIHOP	64	/* Multihop attempted */
+
+#define	EDOTDOT		66	/* RFS specific error */
+#define	EBADMSG		67	/* Not a data message */
+#define	EUSERS		68	/* Too many users */
+#define	EDQUOT		69	/* Quota exceeded */
+#define	ESTALE		70	/* Stale NFS file handle */
+#define	EREMOTE		71	/* Object is remote */
+#define	EOVERFLOW	72	/* Value too large for defined data type */
+
+/* these errnos are defined by Linux but not HPUX. */
+
+#define	EBADE		160	/* Invalid exchange */
+#define	EBADR		161	/* Invalid request descriptor */
+#define	EXFULL		162	/* Exchange full */
+#define	ENOANO		163	/* No anode */
+#define	EBADRQC		164	/* Invalid request code */
+#define	EBADSLT		165	/* Invalid slot */
+#define	EBFONT		166	/* Bad font file format */
+#define	ENOTUNIQ	167	/* Name not unique on network */
+#define	EBADFD		168	/* File descriptor in bad state */
+#define	EREMCHG		169	/* Remote address changed */
+#define	ELIBACC		170	/* Can not access a needed shared library */
+#define	ELIBBAD		171	/* Accessing a corrupted shared library */
+#define	ELIBSCN		172	/* .lib section in a.out corrupted */
+#define	ELIBMAX		173	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	174	/* Cannot exec a shared library directly */
+#define	ERESTART	175	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	176	/* Streams pipe error */
+#define	EUCLEAN		177	/* Structure needs cleaning */
+#define	ENOTNAM		178	/* Not a XENIX named type file */
+#define	ENAVAIL		179	/* No XENIX semaphores available */
+#define	EISNAM		180	/* Is a named type file */
+#define	EREMOTEIO	181	/* Remote I/O error */
+#define	ENOMEDIUM	182	/* No medium found */
+#define	EMEDIUMTYPE	183	/* Wrong medium type */
+#define	ENOKEY		184	/* Required key not available */
+#define	EKEYEXPIRED	185	/* Key has expired */
+#define	EKEYREVOKED	186	/* Key has been revoked */
+#define	EKEYREJECTED	187	/* Key was rejected by service */
+
+/* We now return you to your regularly scheduled HPUX. */
+
+#define ENOSYM		215	/* symbol does not exist in executable */
+#define	ENOTSOCK	216	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	217	/* Destination address required */
+#define	EMSGSIZE	218	/* Message too long */
+#define	EPROTOTYPE	219	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	220	/* Protocol not available */
+#define	EPROTONOSUPPORT	221	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	222	/* Socket type not supported */
+#define	EOPNOTSUPP	223	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	224	/* Protocol family not supported */
+#define	EAFNOSUPPORT	225	/* Address family not supported by protocol */
+#define	EADDRINUSE	226	/* Address already in use */
+#define	EADDRNOTAVAIL	227	/* Cannot assign requested address */
+#define	ENETDOWN	228	/* Network is down */
+#define	ENETUNREACH	229	/* Network is unreachable */
+#define	ENETRESET	230	/* Network dropped connection because of reset */
+#define	ECONNABORTED	231	/* Software caused connection abort */
+#define	ECONNRESET	232	/* Connection reset by peer */
+#define	ENOBUFS		233	/* No buffer space available */
+#define	EISCONN		234	/* Transport endpoint is already connected */
+#define	ENOTCONN	235	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	236	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	237	/* Too many references: cannot splice */
+#define EREFUSED	ECONNREFUSED	/* for HP's NFS apparently */
+#define	ETIMEDOUT	238	/* Connection timed out */
+#define	ECONNREFUSED	239	/* Connection refused */
+#define EREMOTERELEASE	240	/* Remote peer released connection */
+#define	EHOSTDOWN	241	/* Host is down */
+#define	EHOSTUNREACH	242	/* No route to host */
+
+#define	EALREADY	244	/* Operation already in progress */
+#define	EINPROGRESS	245	/* Operation now in progress */
+#define	EWOULDBLOCK	246	/* Operation would block (Linux returns EAGAIN) */
+#define	ENOTEMPTY	247	/* Directory not empty */
+#define	ENAMETOOLONG	248	/* File name too long */
+#define	ELOOP		249	/* Too many symbolic links encountered */
+#define	ENOSYS		251	/* Function not implemented */
+
+#define ENOTSUP		252	/* Function not implemented (POSIX.4 / HPUX) */
+#define ECANCELLED	253	/* aio request was canceled before complete (POSIX.4 / HPUX) */
+#define ECANCELED	ECANCELLED	/* SuSv3 and Solaris wants one 'L' */
+
+/* for robust mutexes */
+#define EOWNERDEAD	254	/* Owner died */
+#define ENOTRECOVERABLE	255	/* State not recoverable */
+
+
+#endif
diff --git a/arch/parisc/include/asm/fb.h b/arch/parisc/include/asm/fb.h
new file mode 100644
index 0000000..4d503a0
--- /dev/null
+++ b/arch/parisc/include/asm/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/parisc/include/asm/fcntl.h b/arch/parisc/include/asm/fcntl.h
new file mode 100644
index 0000000..1e1c824
--- /dev/null
+++ b/arch/parisc/include/asm/fcntl.h
@@ -0,0 +1,39 @@
+#ifndef _PARISC_FCNTL_H
+#define _PARISC_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_APPEND	000000010
+#define O_BLKSEEK	000000100 /* HPUX only */
+#define O_CREAT		000000400 /* not fcntl */
+#define O_EXCL		000002000 /* not fcntl */
+#define O_LARGEFILE	000004000
+#define O_SYNC		000100000
+#define O_NONBLOCK	000200004 /* HPUX has separate NDELAY & NONBLOCK */
+#define O_NOCTTY	000400000 /* not fcntl */
+#define O_DSYNC		001000000 /* HPUX only */
+#define O_RSYNC		002000000 /* HPUX only */
+#define O_NOATIME	004000000
+#define O_CLOEXEC	010000000 /* set close_on_exec */
+
+#define O_DIRECTORY	000010000 /* must be a directory */
+#define O_NOFOLLOW	000000200 /* don't follow links */
+#define O_INVISIBLE	004000000 /* invisible I/O, for DMAPI/XDSM */
+
+#define F_GETLK64	8
+#define F_SETLK64	9
+#define F_SETLKW64	10
+
+#define F_GETOWN	11	/*  for sockets. */
+#define F_SETOWN	12	/*  for sockets. */
+#define F_SETSIG	13	/*  for sockets. */
+#define F_GETSIG	14	/*  for sockets. */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		01
+#define F_WRLCK		02
+#define F_UNLCK		03
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/parisc/include/asm/fixmap.h b/arch/parisc/include/asm/fixmap.h
new file mode 100644
index 0000000..de3fe3a
--- /dev/null
+++ b/arch/parisc/include/asm/fixmap.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+/*
+ * This file defines the locations of the fixed mappings on parisc.
+ *
+ * All of the values in this file are machine virtual addresses.
+ *
+ * All of the values in this file must be <4GB (because of assembly
+ * loading restrictions).  If you place this region anywhere above
+ * __PAGE_OFFSET, you must adjust the memory map accordingly */
+
+/* The alias region is used in kernel space to do copy/clear to or
+ * from areas congruently mapped with user space.  It is 8MB large
+ * and must be 16MB aligned */
+#define TMPALIAS_MAP_START	((__PAGE_OFFSET) - 16*1024*1024)
+/* This is the kernel area for all maps (vmalloc, dma etc.)  most
+ * usually, it extends up to TMPALIAS_MAP_START.  Virtual addresses
+ * 0..GATEWAY_PAGE_SIZE are reserved for the gateway page */
+#define KERNEL_MAP_START	(GATEWAY_PAGE_SIZE)
+#define KERNEL_MAP_END		(TMPALIAS_MAP_START)
+
+#ifndef __ASSEMBLY__
+extern void *vmalloc_start;
+#define PCXL_DMA_MAP_SIZE	(8*1024*1024)
+#define VMALLOC_START		((unsigned long)vmalloc_start)
+#define VMALLOC_END		(KERNEL_MAP_END)
+#endif /*__ASSEMBLY__*/
+
+#endif /*_ASM_FIXMAP_H*/
diff --git a/arch/parisc/include/asm/floppy.h b/arch/parisc/include/asm/floppy.h
new file mode 100644
index 0000000..4ca69f5
--- /dev/null
+++ b/arch/parisc/include/asm/floppy.h
@@ -0,0 +1,271 @@
+/*    Architecture specific parts of the Floppy driver
+ *
+ *    Linux/PA-RISC Project (http://www.parisc-linux.org/)
+ *    Copyright (C) 2000 Matthew Wilcox (willy a debian . org)
+ *    Copyright (C) 2000 Dave Kennedy
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_PARISC_FLOPPY_H
+#define __ASM_PARISC_FLOPPY_H
+
+#include <linux/vmalloc.h>
+
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ */
+#define _CROSS_64KB(a,s,vdma) \
+(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+
+#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
+
+
+#define SW fd_routine[use_virtual_dma&1]
+#define CSW fd_routine[can_use_virtual_dma & 1]
+
+
+#define fd_inb(port)			readb(port)
+#define fd_outb(value, port)		writeb(value, port)
+
+#define fd_request_dma()        CSW._request_dma(FLOPPY_DMA,"floppy")
+#define fd_free_dma()           CSW._free_dma(FLOPPY_DMA)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL)
+#define fd_get_dma_residue()    SW._get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size)	SW._dma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
+
+#define FLOPPY_CAN_FALLBACK_ON_NODMA
+
+static int virtual_dma_count=0;
+static int virtual_dma_residue=0;
+static char *virtual_dma_addr=0;
+static int virtual_dma_mode=0;
+static int doing_pdma=0;
+
+static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
+{
+	register unsigned char st;
+
+#undef TRACE_FLPY_INT
+
+#ifdef TRACE_FLPY_INT
+	static int calls=0;
+	static int bytes=0;
+	static int dma_wait=0;
+#endif
+	if (!doing_pdma) {
+		floppy_interrupt(irq, dev_id, regs);
+		return;
+	}
+
+#ifdef TRACE_FLPY_INT
+	if(!calls)
+		bytes = virtual_dma_count;
+#endif
+
+	{
+		register int lcount;
+		register char *lptr = virtual_dma_addr;
+
+		for (lcount = virtual_dma_count; lcount; lcount--) {
+			st = fd_inb(virtual_dma_port+4) & 0xa0 ;
+			if (st != 0xa0) 
+				break;
+			if (virtual_dma_mode) {
+				fd_outb(*lptr, virtual_dma_port+5);
+			} else {
+				*lptr = fd_inb(virtual_dma_port+5);
+			}
+			lptr++;
+		}
+		virtual_dma_count = lcount;
+		virtual_dma_addr = lptr;
+		st = fd_inb(virtual_dma_port+4);
+	}
+
+#ifdef TRACE_FLPY_INT
+	calls++;
+#endif
+	if (st == 0x20)
+		return;
+	if (!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count = 0;
+#ifdef TRACE_FLPY_INT
+		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", 
+		       virtual_dma_count, virtual_dma_residue, calls, bytes,
+		       dma_wait);
+		calls = 0;
+		dma_wait=0;
+#endif
+		doing_pdma = 0;
+		floppy_interrupt(irq, dev_id, regs);
+		return;
+	}
+#ifdef TRACE_FLPY_INT
+	if (!virtual_dma_count)
+		dma_wait++;
+#endif
+}
+
+static void fd_disable_dma(void)
+{
+	if(! (can_use_virtual_dma & 1))
+		disable_dma(FLOPPY_DMA);
+	doing_pdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count=0;
+}
+
+static int vdma_request_dma(unsigned int dmanr, const char * device_id)
+{
+	return 0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if(can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,
+				   IRQF_DISABLED, "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+				   IRQF_DISABLED, "floppy", NULL);
+}
+
+static unsigned long dma_mem_alloc(unsigned long size)
+{
+	return __get_dma_pages(GFP_KERNEL, get_order(size));
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+	return (unsigned long) vmalloc(size);
+
+}
+
+#define nodma_mem_alloc(size) vdma_mem_alloc(size)
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	if((unsigned int) addr >= (unsigned int) high_memory)
+		return vfree((void *)addr);
+	else
+		free_pages(addr, get_order(size));		
+}
+
+#define fd_dma_mem_free(addr, size)  _fd_dma_mem_free(addr, size) 
+
+static void _fd_chose_dma_mode(char *addr, unsigned long size)
+{
+	if(can_use_virtual_dma == 2) {
+		if((unsigned int) addr >= (unsigned int) high_memory ||
+		   virt_to_bus(addr) >= 0x1000000 ||
+		   _CROSS_64KB(addr, size, 0))
+			use_virtual_dma = 1;
+		else
+			use_virtual_dma = 0;
+	} else {
+		use_virtual_dma = can_use_virtual_dma & 1;
+	}
+}
+
+#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
+
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_pdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+#ifdef FLOPPY_SANITY_CHECK
+	if (CROSS_64KB(addr, size)) {
+		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
+		return -1;
+	}
+#endif
+	/* actual, physical DMA */
+	doing_pdma = 0;
+	clear_dma_ff(FLOPPY_DMA);
+	set_dma_mode(FLOPPY_DMA,mode);
+	set_dma_addr(FLOPPY_DMA,virt_to_bus(addr));
+	set_dma_count(FLOPPY_DMA,size);
+	enable_dma(FLOPPY_DMA);
+	return 0;
+}
+
+static struct fd_routine_l {
+	int (*_request_dma)(unsigned int dmanr, const char * device_id);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	unsigned long (*_dma_mem_alloc) (unsigned long size);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+} fd_routine[] = {
+	{
+		request_dma,
+		free_dma,
+		get_dma_residue,
+		dma_mem_alloc,
+		hard_dma_setup
+	},
+	{
+		vdma_request_dma,
+		vdma_nop,
+		vdma_get_dma_residue,
+		vdma_mem_alloc,
+		vdma_dma_setup
+	}
+};
+
+
+static int FDC1 = 0x3f0; /* Lies.  Floppy controller is memory mapped, not io mapped */
+static int FDC2 = -1;
+
+#define FLOPPY0_TYPE	0
+#define FLOPPY1_TYPE	0
+
+#define N_FDC 1
+#define N_DRIVE 8
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __ASM_PARISC_FLOPPY_H */
diff --git a/arch/parisc/include/asm/futex.h b/arch/parisc/include/asm/futex.h
new file mode 100644
index 0000000..0c705c3
--- /dev/null
+++ b/arch/parisc/include/asm/futex.h
@@ -0,0 +1,77 @@
+#ifndef _ASM_PARISC_FUTEX_H
+#define _ASM_PARISC_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+static inline int
+futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+	case FUTEX_OP_ADD:
+	case FUTEX_OP_OR:
+	case FUTEX_OP_ANDN:
+	case FUTEX_OP_XOR:
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+/* Non-atomic version */
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int err = 0;
+	int uval;
+
+	/* futex.c wants to do a cmpxchg_inatomic on kernel NULL, which is
+	 * our gateway page, and causes no end of trouble...
+	 */
+	if (segment_eq(KERNEL_DS, get_fs()) && !uaddr)
+		return -EFAULT;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	err = get_user(uval, uaddr);
+	if (err) return -EFAULT;
+	if (uval == oldval)
+		err = put_user(newval, uaddr);
+	if (err) return -EFAULT;
+	return uval;
+}
+
+#endif /*__KERNEL__*/
+#endif /*_ASM_PARISC_FUTEX_H*/
diff --git a/arch/parisc/include/asm/grfioctl.h b/arch/parisc/include/asm/grfioctl.h
new file mode 100644
index 0000000..671e060
--- /dev/null
+++ b/arch/parisc/include/asm/grfioctl.h
@@ -0,0 +1,113 @@
+/*  Architecture specific parts of HP's STI (framebuffer) driver.
+ *  Structures are HP-UX compatible for XFree86 usage.
+ * 
+ *    Linux/PA-RISC Project (http://www.parisc-linux.org/)
+ *    Copyright (C) 2001 Helge Deller (deller a parisc-linux org)
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_PARISC_GRFIOCTL_H
+#define __ASM_PARISC_GRFIOCTL_H
+
+/* upper 32 bits of graphics id (HP/UX identifier) */
+
+#define GRFGATOR		8
+#define S9000_ID_S300		9
+#define GRFBOBCAT		9
+#define	GRFCATSEYE		9
+#define S9000_ID_98720		10
+#define GRFRBOX			10
+#define S9000_ID_98550		11
+#define GRFFIREEYE		11
+#define S9000_ID_A1096A		12
+#define GRFHYPERION		12
+#define S9000_ID_FRI		13
+#define S9000_ID_98730		14
+#define GRFDAVINCI		14
+#define S9000_ID_98705		0x26C08070	/* Tigershark */
+#define S9000_ID_98736		0x26D148AB
+#define S9000_ID_A1659A		0x26D1482A	/* CRX 8 plane color (=ELK) */
+#define S9000_ID_ELK		S9000_ID_A1659A
+#define S9000_ID_A1439A		0x26D148EE	/* CRX24 = CRX+ (24-plane color) */
+#define S9000_ID_A1924A		0x26D1488C	/* GRX gray-scale */
+#define S9000_ID_ELM		S9000_ID_A1924A
+#define S9000_ID_98765		0x27480DEF
+#define S9000_ID_ELK_768	0x27482101
+#define S9000_ID_STINGER	0x27A4A402
+#define S9000_ID_TIMBER		0x27F12392	/* Bushmaster (710) Graphics */
+#define S9000_ID_TOMCAT		0x27FCCB6D	/* dual-headed ELK (Dual CRX) */
+#define S9000_ID_ARTIST		0x2B4DED6D	/* Artist (Gecko/712 & 715) onboard Graphics */
+#define S9000_ID_HCRX		0x2BCB015A	/* Hyperdrive/Hyperbowl (A4071A) Graphics */
+#define CRX24_OVERLAY_PLANES	0x920825AA	/* Overlay planes on CRX24 */
+
+#define CRT_ID_ELK_1024		S9000_ID_ELK_768 /* Elk 1024x768  CRX */
+#define CRT_ID_ELK_1280		S9000_ID_A1659A	/* Elk 1280x1024 CRX */
+#define CRT_ID_ELK_1024DB	0x27849CA5      /* Elk 1024x768 double buffer */
+#define CRT_ID_ELK_GS		S9000_ID_A1924A	/* Elk 1280x1024 GreyScale    */
+#define CRT_ID_CRX24		S9000_ID_A1439A	/* Piranha */
+#define CRT_ID_VISUALIZE_EG	0x2D08C0A7      /* Graffiti, A4450A (built-in B132+/B160L) */
+#define CRT_ID_THUNDER		0x2F23E5FC      /* Thunder 1 VISUALIZE 48*/
+#define CRT_ID_THUNDER2		0x2F8D570E      /* Thunder 2 VISUALIZE 48 XP*/
+#define CRT_ID_HCRX		S9000_ID_HCRX	/* Hyperdrive HCRX */
+#define CRT_ID_CRX48Z		S9000_ID_STINGER /* Stinger */
+#define CRT_ID_DUAL_CRX		S9000_ID_TOMCAT	/* Tomcat */
+#define CRT_ID_PVRX		S9000_ID_98705	/* Tigershark */
+#define CRT_ID_TIMBER		S9000_ID_TIMBER	/* Timber (710 builtin) */
+#define CRT_ID_TVRX		S9000_ID_98765	/* TVRX (gto/falcon) */
+#define CRT_ID_ARTIST		S9000_ID_ARTIST	/* Artist */
+#define CRT_ID_SUMMIT		0x2FC1066B      /* Summit FX2, FX4, FX6 ... */
+#define CRT_ID_LEGO		0x35ACDA30	/* Lego FX5, FX10 ... */
+#define CRT_ID_PINNACLE		0x35ACDA16	/* Pinnacle FXe */ 
+
+/* structure for ioctl(GCDESCRIBE) */
+
+#define gaddr_t unsigned long	/* FIXME: PA2.0 (64bit) portable ? */
+
+struct	grf_fbinfo {
+	unsigned int	id;		/* upper 32 bits of graphics id */
+	unsigned int	mapsize;	/* mapped size of framebuffer */
+	unsigned int	dwidth, dlength;/* x and y sizes */
+	unsigned int	width, length;	/* total x and total y size */
+	unsigned int	xlen;		/* x pitch size */
+	unsigned int	bpp, bppu;	/* bits per pixel and used bpp */
+	unsigned int	npl, nplbytes;	/* # of planes and bytes per plane */
+	char		name[32];	/* name of the device (from ROM) */
+	unsigned int	attr;		/* attributes */
+	gaddr_t 	fbbase, regbase;/* framebuffer and register base addr */
+	gaddr_t		regions[6];	/* region bases */
+};
+
+#define	GCID		_IOR('G', 0, int)
+#define	GCON		_IO('G', 1)
+#define	GCOFF		_IO('G', 2)
+#define	GCAON		_IO('G', 3)
+#define	GCAOFF		_IO('G', 4)
+#define	GCMAP		_IOWR('G', 5, int)
+#define	GCUNMAP		_IOWR('G', 6, int)
+#define	GCMAP_HPUX	_IO('G', 5)
+#define	GCUNMAP_HPUX	_IO('G', 6)
+#define	GCLOCK		_IO('G', 7)
+#define	GCUNLOCK	_IO('G', 8)
+#define	GCLOCK_MINIMUM	_IO('G', 9)
+#define	GCUNLOCK_MINIMUM _IO('G', 10)
+#define	GCSTATIC_CMAP	_IO('G', 11)
+#define	GCVARIABLE_CMAP _IO('G', 12)
+#define GCTERM		_IOWR('G',20,int)	/* multi-headed Tomcat */ 
+#define GCDESCRIBE	_IOR('G', 21, struct grf_fbinfo)
+#define GCFASTLOCK	_IO('G', 26)
+
+#endif /* __ASM_PARISC_GRFIOCTL_H */
+
diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h
new file mode 100644
index 0000000..ce93133
--- /dev/null
+++ b/arch/parisc/include/asm/hardirq.h
@@ -0,0 +1,29 @@
+/* hardirq.h: PA-RISC hard IRQ support.
+ *
+ * Copyright (C) 2001 Matthew Wilcox <matthew@wil.cx>
+ *
+ * The locking is really quite interesting.  There's a cpu-local
+ * count of how many interrupts are being handled, and a global
+ * lock.  An interrupt can only be serviced if the global lock
+ * is free.  You can't be sure no more interrupts are being
+ * serviced until you've acquired the lock and then checked
+ * all the per-cpu interrupt counts are all zero.  It's a specialised
+ * br_lock, and that's exactly how Sparc does it.  We don't because
+ * it's more locking for us.  This way is lock-free in the interrupt path.
+ */
+
+#ifndef _PARISC_HARDIRQ_H
+#define _PARISC_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned long __softirq_pending; /* set_bit is used on this */
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* _PARISC_HARDIRQ_H */
diff --git a/arch/parisc/include/asm/hardware.h b/arch/parisc/include/asm/hardware.h
new file mode 100644
index 0000000..4e96268
--- /dev/null
+++ b/arch/parisc/include/asm/hardware.h
@@ -0,0 +1,127 @@
+#ifndef _PARISC_HARDWARE_H
+#define _PARISC_HARDWARE_H
+
+#include <linux/mod_devicetable.h>
+#include <asm/pdc.h>
+
+#define HWTYPE_ANY_ID		PA_HWTYPE_ANY_ID
+#define HVERSION_ANY_ID		PA_HVERSION_ANY_ID
+#define HVERSION_REV_ANY_ID	PA_HVERSION_REV_ANY_ID
+#define SVERSION_ANY_ID		PA_SVERSION_ANY_ID
+
+struct hp_hardware {
+	unsigned short	hw_type:5;	/* HPHW_xxx */
+	unsigned short	hversion;
+	unsigned long	sversion:28;
+	unsigned short	opt;
+	const char	name[80];	/* The hardware description */
+};
+
+struct parisc_device;
+
+enum cpu_type {
+	pcx	= 0, /* pa7000		pa 1.0  */
+	pcxs	= 1, /* pa7000		pa 1.1a */
+	pcxt	= 2, /* pa7100		pa 1.1b */
+	pcxt_	= 3, /* pa7200	(t')	pa 1.1c */
+	pcxl	= 4, /* pa7100lc	pa 1.1d */
+	pcxl2	= 5, /* pa7300lc	pa 1.1e */
+	pcxu	= 6, /* pa8000		pa 2.0  */
+	pcxu_	= 7, /* pa8200	(u+)	pa 2.0  */
+	pcxw	= 8, /* pa8500		pa 2.0  */
+	pcxw_	= 9, /* pa8600	(w+)	pa 2.0  */
+	pcxw2	= 10, /* pa8700		pa 2.0  */
+	mako	= 11, /* pa8800		pa 2.0  */
+	mako2	= 12  /* pa8900		pa 2.0  */
+};
+
+extern const char * const cpu_name_version[][2]; /* mapping from enum cpu_type to strings */
+
+struct parisc_driver;
+
+struct io_module {
+        volatile uint32_t nothing;		/* reg 0 */
+        volatile uint32_t io_eim;
+        volatile uint32_t io_dc_adata;
+        volatile uint32_t io_ii_cdata;
+        volatile uint32_t io_dma_link;		/* reg 4 */
+        volatile uint32_t io_dma_command;
+        volatile uint32_t io_dma_address;
+        volatile uint32_t io_dma_count;
+        volatile uint32_t io_flex;		/* reg 8 */
+        volatile uint32_t io_spa_address;
+        volatile uint32_t reserved1[2];
+        volatile uint32_t io_command;		/* reg 12 */
+        volatile uint32_t io_status;
+        volatile uint32_t io_control;
+        volatile uint32_t io_data;
+        volatile uint32_t reserved2;		/* reg 16 */
+        volatile uint32_t chain_addr;
+        volatile uint32_t sub_mask_clr;
+        volatile uint32_t reserved3[13];
+        volatile uint32_t undefined[480];
+        volatile uint32_t unpriv[512];
+};
+
+struct bc_module {
+        volatile uint32_t unused1[12];
+        volatile uint32_t io_command;
+        volatile uint32_t io_status;
+        volatile uint32_t io_control;
+        volatile uint32_t unused2[1];
+        volatile uint32_t io_err_resp;
+        volatile uint32_t io_err_info;
+        volatile uint32_t io_err_req;
+        volatile uint32_t unused3[11];
+        volatile uint32_t io_io_low;
+        volatile uint32_t io_io_high;
+};
+
+#define HPHW_NPROC     0 
+#define HPHW_MEMORY    1       
+#define HPHW_B_DMA     2
+#define HPHW_OBSOLETE  3
+#define HPHW_A_DMA     4
+#define HPHW_A_DIRECT  5
+#define HPHW_OTHER     6
+#define HPHW_BCPORT    7
+#define HPHW_CIO       8
+#define HPHW_CONSOLE   9
+#define HPHW_FIO       10
+#define HPHW_BA        11
+#define HPHW_IOA       12
+#define HPHW_BRIDGE    13
+#define HPHW_FABRIC    14
+#define HPHW_MC	       15
+#define HPHW_FAULTY    31
+
+
+/* hardware.c: */
+extern const char *parisc_hardware_description(struct parisc_device_id *id);
+extern enum cpu_type parisc_get_cpu_type(unsigned long hversion);
+
+struct pci_dev;
+
+/* drivers.c: */
+extern struct parisc_device *alloc_pa_dev(unsigned long hpa,
+		struct hardware_path *path);
+extern int register_parisc_device(struct parisc_device *dev);
+extern int register_parisc_driver(struct parisc_driver *driver);
+extern int count_parisc_driver(struct parisc_driver *driver);
+extern int unregister_parisc_driver(struct parisc_driver *driver);
+extern void walk_central_bus(void);
+extern const struct parisc_device *find_pa_parent_type(const struct parisc_device *, int);
+extern void print_parisc_devices(void);
+extern char *print_pa_hwpath(struct parisc_device *dev, char *path);
+extern char *print_pci_hwpath(struct pci_dev *dev, char *path);
+extern void get_pci_node_path(struct pci_dev *dev, struct hardware_path *path);
+extern void init_parisc_bus(void);
+extern struct device *hwpath_to_device(struct hardware_path *modpath);
+extern void device_to_hwpath(struct device *dev, struct hardware_path *path);
+
+
+/* inventory.c: */
+extern void do_memory_inventory(void);
+extern void do_device_inventory(void);
+
+#endif /* _PARISC_HARDWARE_H */
diff --git a/arch/parisc/include/asm/hw_irq.h b/arch/parisc/include/asm/hw_irq.h
new file mode 100644
index 0000000..6707f7d
--- /dev/null
+++ b/arch/parisc/include/asm/hw_irq.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+/*
+ *	linux/include/asm/hw_irq.h
+ */
+
+#endif
diff --git a/arch/parisc/include/asm/ide.h b/arch/parisc/include/asm/ide.h
new file mode 100644
index 0000000..81700a2
--- /dev/null
+++ b/arch/parisc/include/asm/ide.h
@@ -0,0 +1,57 @@
+/*
+ *  linux/include/asm-parisc/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the PARISC architecture specific IDE code.
+ */
+
+#ifndef __ASM_PARISC_IDE_H
+#define __ASM_PARISC_IDE_H
+
+#ifdef __KERNEL__
+
+/* Generic I/O and MEMIO string operations.  */
+
+#define __ide_insw	insw
+#define __ide_insl	insl
+#define __ide_outsw	outsw
+#define __ide_outsl	outsl
+
+static __inline__ void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		*(u16 *)addr = __raw_readw(port);
+		addr += 2;
+	}
+}
+
+static __inline__ void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		*(u32 *)addr = __raw_readl(port);
+		addr += 4;
+	}
+}
+
+static __inline__ void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		__raw_writew(*(u16 *)addr, port);
+		addr += 2;
+	}
+}
+
+static __inline__ void __ide_mm_outsl(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		__raw_writel(*(u32 *)addr, port);
+		addr += 4;
+	}
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_PARISC_IDE_H */
diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h
new file mode 100644
index 0000000..55ddb18
--- /dev/null
+++ b/arch/parisc/include/asm/io.h
@@ -0,0 +1,293 @@
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <linux/types.h>
+#include <asm/pgtable.h>
+
+extern unsigned long parisc_vmerge_boundary;
+extern unsigned long parisc_vmerge_max_size;
+
+#define BIO_VMERGE_BOUNDARY	parisc_vmerge_boundary
+#define BIO_VMERGE_MAX_SIZE	parisc_vmerge_max_size
+
+#define virt_to_phys(a) ((unsigned long)__pa(a))
+#define phys_to_virt(a) __va(a)
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+static inline unsigned long isa_bus_to_virt(unsigned long addr) {
+	BUG();
+	return 0;
+}
+
+static inline unsigned long isa_virt_to_bus(void *addr) {
+	BUG();
+	return 0;
+}
+
+/*
+ * Memory mapped I/O
+ *
+ * readX()/writeX() do byteswapping and take an ioremapped address
+ * __raw_readX()/__raw_writeX() don't byteswap and take an ioremapped address.
+ * gsc_*() don't byteswap and operate on physical addresses;
+ *   eg dev->hpa or 0xfee00000.
+ */
+
+static inline unsigned char gsc_readb(unsigned long addr)
+{
+	long flags;
+	unsigned char ret;
+
+	__asm__ __volatile__(
+	"	rsm	2,%0\n"
+	"	ldbx	0(%2),%1\n"
+	"	mtsm	%0\n"
+	: "=&r" (flags), "=r" (ret) : "r" (addr) );
+
+	return ret;
+}
+
+static inline unsigned short gsc_readw(unsigned long addr)
+{
+	long flags;
+	unsigned short ret;
+
+	__asm__ __volatile__(
+	"	rsm	2,%0\n"
+	"	ldhx	0(%2),%1\n"
+	"	mtsm	%0\n"
+	: "=&r" (flags), "=r" (ret) : "r" (addr) );
+
+	return ret;
+}
+
+static inline unsigned int gsc_readl(unsigned long addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__(
+	"	ldwax	0(%1),%0\n"
+	: "=r" (ret) : "r" (addr) );
+
+	return ret;
+}
+
+static inline unsigned long long gsc_readq(unsigned long addr)
+{
+	unsigned long long ret;
+
+#ifdef CONFIG_64BIT
+	__asm__ __volatile__(
+	"	ldda	0(%1),%0\n"
+	:  "=r" (ret) : "r" (addr) );
+#else
+	/* two reads may have side effects.. */
+	ret = ((u64) gsc_readl(addr)) << 32;
+	ret |= gsc_readl(addr+4);
+#endif
+	return ret;
+}
+
+static inline void gsc_writeb(unsigned char val, unsigned long addr)
+{
+	long flags;
+	__asm__ __volatile__(
+	"	rsm	2,%0\n"
+	"	stbs	%1,0(%2)\n"
+	"	mtsm	%0\n"
+	: "=&r" (flags) :  "r" (val), "r" (addr) );
+}
+
+static inline void gsc_writew(unsigned short val, unsigned long addr)
+{
+	long flags;
+	__asm__ __volatile__(
+	"	rsm	2,%0\n"
+	"	sths	%1,0(%2)\n"
+	"	mtsm	%0\n"
+	: "=&r" (flags) :  "r" (val), "r" (addr) );
+}
+
+static inline void gsc_writel(unsigned int val, unsigned long addr)
+{
+	__asm__ __volatile__(
+	"	stwas	%0,0(%1)\n"
+	: :  "r" (val), "r" (addr) );
+}
+
+static inline void gsc_writeq(unsigned long long val, unsigned long addr)
+{
+#ifdef CONFIG_64BIT
+	__asm__ __volatile__(
+	"	stda	%0,0(%1)\n"
+	: :  "r" (val), "r" (addr) );
+#else
+	/* two writes may have side effects.. */
+	gsc_writel(val >> 32, addr);
+	gsc_writel(val, addr+4);
+#endif
+}
+
+/*
+ * The standard PCI ioremap interfaces
+ */
+
+extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
+
+/* Most machines react poorly to I/O-space being cacheable... Instead let's
+ * define ioremap() in terms of ioremap_nocache().
+ */
+static inline void __iomem * ioremap(unsigned long offset, unsigned long size)
+{
+	return __ioremap(offset, size, _PAGE_NO_CACHE);
+}
+#define ioremap_nocache(off, sz)	ioremap((off), (sz))
+
+extern void iounmap(const volatile void __iomem *addr);
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+	return (*(volatile unsigned char __force *) (addr));
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *) addr;
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+static inline unsigned long long __raw_readq(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long long __force *) addr;
+}
+
+static inline void __raw_writeb(unsigned char b, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *) addr = b;
+}
+static inline void __raw_writew(unsigned short b, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *) addr = b;
+}
+static inline void __raw_writel(unsigned int b, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *) addr = b;
+}
+static inline void __raw_writeq(unsigned long long b, volatile void __iomem *addr)
+{
+	*(volatile unsigned long long __force *) addr = b;
+}
+
+/* readb can never be const, so use __fswab instead of le*_to_cpu */
+#define readb(addr) __raw_readb(addr)
+#define readw(addr) __fswab16(__raw_readw(addr))
+#define readl(addr) __fswab32(__raw_readl(addr))
+#define readq(addr) __fswab64(__raw_readq(addr))
+#define writeb(b, addr) __raw_writeb(b, addr)
+#define writew(b, addr) __raw_writew(cpu_to_le16(b), addr)
+#define writel(b, addr) __raw_writel(cpu_to_le32(b), addr)
+#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define readq_relaxed(addr) readq(addr)
+
+#define mmiowb() do { } while (0)
+
+void memset_io(volatile void __iomem *addr, unsigned char val, int count);
+void memcpy_fromio(void *dst, const volatile void __iomem *src, int count);
+void memcpy_toio(volatile void __iomem *dst, const void *src, int count);
+
+/* Port-space IO */
+
+#define inb_p inb
+#define inw_p inw
+#define inl_p inl
+#define outb_p outb
+#define outw_p outw
+#define outl_p outl
+
+extern unsigned char eisa_in8(unsigned short port);
+extern unsigned short eisa_in16(unsigned short port);
+extern unsigned int eisa_in32(unsigned short port);
+extern void eisa_out8(unsigned char data, unsigned short port);
+extern void eisa_out16(unsigned short data, unsigned short port);
+extern void eisa_out32(unsigned int data, unsigned short port);
+
+#if defined(CONFIG_PCI)
+extern unsigned char inb(int addr);
+extern unsigned short inw(int addr);
+extern unsigned int inl(int addr);
+
+extern void outb(unsigned char b, int addr);
+extern void outw(unsigned short b, int addr);
+extern void outl(unsigned int b, int addr);
+#elif defined(CONFIG_EISA)
+#define inb eisa_in8
+#define inw eisa_in16
+#define inl eisa_in32
+#define outb eisa_out8
+#define outw eisa_out16
+#define outl eisa_out32
+#else
+static inline char inb(unsigned long addr)
+{
+	BUG();
+	return -1;
+}
+
+static inline short inw(unsigned long addr)
+{
+	BUG();
+	return -1;
+}
+
+static inline int inl(unsigned long addr)
+{
+	BUG();
+	return -1;
+}
+
+#define outb(x, y)	BUG()
+#define outw(x, y)	BUG()
+#define outl(x, y)	BUG()
+#endif
+
+/*
+ * String versions of in/out ops:
+ */
+extern void insb (unsigned long port, void *dst, unsigned long count);
+extern void insw (unsigned long port, void *dst, unsigned long count);
+extern void insl (unsigned long port, void *dst, unsigned long count);
+extern void outsb (unsigned long port, const void *src, unsigned long count);
+extern void outsw (unsigned long port, const void *src, unsigned long count);
+extern void outsl (unsigned long port, const void *src, unsigned long count);
+
+
+/* IO Port space is :      BBiiii   where BB is HBA number. */
+#define IO_SPACE_LIMIT 0x00ffffff
+
+/* PA machines have an MM I/O space from 0xf0000000-0xffffffff in 32
+ * bit mode and from 0xfffffffff0000000-0xfffffffffffffff in 64 bit
+ * mode (essentially just sign extending.  This macro takes in a 32
+ * bit I/O address (still with the leading f) and outputs the correct
+ * value for either 32 or 64 bit mode */
+#define F_EXTEND(x) ((unsigned long)((x) | (0xffffffff00000000ULL)))
+
+#include <asm-generic/iomap.h>
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif
diff --git a/arch/parisc/include/asm/ioctl.h b/arch/parisc/include/asm/ioctl.h
new file mode 100644
index 0000000..ec8efa0
--- /dev/null
+++ b/arch/parisc/include/asm/ioctl.h
@@ -0,0 +1,44 @@
+/*
+ *    Linux/PA-RISC Project (http://www.parisc-linux.org/)
+ *    Copyright (C) 1999,2003 Matthew Wilcox < willy at debian . org >
+ *    portions from "linux/ioctl.h for Linux" by H.H. Bergman.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+
+#ifndef _ASM_PARISC_IOCTL_H
+#define _ASM_PARISC_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	2U
+#define _IOC_READ	1U
+
+#include <asm-generic/ioctl.h>
+
+#endif /* _ASM_PARISC_IOCTL_H */
diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h
new file mode 100644
index 0000000..6747fad
--- /dev/null
+++ b/arch/parisc/include/asm/ioctls.h
@@ -0,0 +1,90 @@
+#ifndef __ARCH_PARISC_IOCTLS_H__
+#define __ARCH_PARISC_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		_IOR('T', 16, struct termios) /* TCGETATTR */
+#define TCSETS		_IOW('T', 17, struct termios) /* TCSETATTR */
+#define TCSETSW		_IOW('T', 18, struct termios) /* TCSETATTRD */
+#define TCSETSF		_IOW('T', 19, struct termios) /* TCSETATTRF */
+#define TCGETA		_IOR('T', 1, struct termio)
+#define TCSETA		_IOW('T', 2, struct termio)
+#define TCSETAW		_IOW('T', 3, struct termio)
+#define TCSETAF		_IOW('T', 4, struct termio)
+#define TCSBRK		_IO('T', 5)
+#define TCXONC		_IO('T', 6)
+#define TCFLSH		_IO('T', 7)
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	_IOR('T', 30, int)
+#define TIOCSPGRP	_IOW('T', 29, int)
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	_IOR('T', 20, int) /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460	/* Get exact space used by quota */
+
+#define TIOCSTART	0x5461
+#define TIOCSTOP	0x5462
+#define TIOCSLTC	0x5462
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* _ASM_PARISC_IOCTLS_H */
diff --git a/arch/parisc/include/asm/ipcbuf.h b/arch/parisc/include/asm/ipcbuf.h
new file mode 100644
index 0000000..bd956c4
--- /dev/null
+++ b/arch/parisc/include/asm/ipcbuf.h
@@ -0,0 +1,27 @@
+#ifndef __PARISC_IPCBUF_H__
+#define __PARISC_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for PA-RISC is almost identical to
+ * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the kernel.
+ * 'seq' has been changed from long to int so that it's the same size
+ * on 64-bit kernels as on 32-bit ones.
+ */
+
+struct ipc64_perm
+{
+	key_t           key;
+	uid_t           uid;
+	gid_t           gid;
+	uid_t           cuid;
+	gid_t           cgid;
+	unsigned short int	__pad1;
+	mode_t          mode;
+	unsigned short int	__pad2;
+	unsigned short int	seq;
+	unsigned int	__pad3;
+	unsigned long long int __unused1;
+	unsigned long long int __unused2;
+};
+
+#endif /* __PARISC_IPCBUF_H__ */
diff --git a/arch/parisc/include/asm/irq.h b/arch/parisc/include/asm/irq.h
new file mode 100644
index 0000000..399c819
--- /dev/null
+++ b/arch/parisc/include/asm/irq.h
@@ -0,0 +1,57 @@
+/*
+ * include/asm-parisc/irq.h
+ *
+ * Copyright 2005 Matthew Wilcox <matthew@wil.cx>
+ */
+
+#ifndef _ASM_PARISC_IRQ_H
+#define _ASM_PARISC_IRQ_H
+
+#include <linux/cpumask.h>
+#include <asm/types.h>
+
+#define NO_IRQ		(-1)
+
+#ifdef CONFIG_GSC
+#define GSC_IRQ_BASE	16
+#define GSC_IRQ_MAX	63
+#define CPU_IRQ_BASE	64
+#else
+#define CPU_IRQ_BASE	16
+#endif
+
+#define TIMER_IRQ	(CPU_IRQ_BASE + 0)
+#define	IPI_IRQ		(CPU_IRQ_BASE + 1)
+#define CPU_IRQ_MAX	(CPU_IRQ_BASE + (BITS_PER_LONG - 1))
+
+#define NR_IRQS		(CPU_IRQ_MAX + 1)
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return (irq == 2) ? 9 : irq;
+}
+
+struct irq_chip;
+
+/*
+ * Some useful "we don't have to do anything here" handlers.  Should
+ * probably be provided by the generic code.
+ */
+void no_ack_irq(unsigned int irq);
+void no_end_irq(unsigned int irq);
+void cpu_ack_irq(unsigned int irq);
+void cpu_end_irq(unsigned int irq);
+
+extern int txn_alloc_irq(unsigned int nbits);
+extern int txn_claim_irq(int);
+extern unsigned int txn_alloc_data(unsigned int);
+extern unsigned long txn_alloc_addr(unsigned int);
+extern unsigned long txn_affinity_addr(unsigned int irq, int cpu);
+
+extern int cpu_claim_irq(unsigned int irq, struct irq_chip *, void *);
+extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest);
+
+/* soft power switch support (power.c) */
+extern struct tasklet_struct power_tasklet;
+
+#endif	/* _ASM_PARISC_IRQ_H */
diff --git a/arch/parisc/include/asm/irq_regs.h b/arch/parisc/include/asm/irq_regs.h
new file mode 100644
index 0000000..3dd9c0b
--- /dev/null
+++ b/arch/parisc/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/parisc/include/asm/kdebug.h b/arch/parisc/include/asm/kdebug.h
new file mode 100644
index 0000000..6ece1b0
--- /dev/null
+++ b/arch/parisc/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/parisc/include/asm/kmap_types.h b/arch/parisc/include/asm/kmap_types.h
new file mode 100644
index 0000000..806aae3
--- /dev/null
+++ b/arch/parisc/include/asm/kmap_types.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/arch/parisc/include/asm/led.h b/arch/parisc/include/asm/led.h
new file mode 100644
index 0000000..c3405ab
--- /dev/null
+++ b/arch/parisc/include/asm/led.h
@@ -0,0 +1,42 @@
+#ifndef LED_H
+#define LED_H
+
+#define	LED7		0x80		/* top (or furthest right) LED */
+#define	LED6		0x40
+#define	LED5		0x20
+#define	LED4		0x10
+#define	LED3		0x08
+#define	LED2		0x04
+#define	LED1		0x02
+#define	LED0		0x01		/* bottom (or furthest left) LED */
+
+#define	LED_LAN_TX	LED0		/* for LAN transmit activity */
+#define	LED_LAN_RCV	LED1		/* for LAN receive activity */
+#define	LED_DISK_IO	LED2		/* for disk activity */
+#define	LED_HEARTBEAT	LED3		/* heartbeat */
+
+/* values for pdc_chassis_lcd_info_ret_block.model: */
+#define DISPLAY_MODEL_LCD  0		/* KittyHawk LED or LCD */
+#define DISPLAY_MODEL_NONE 1		/* no LED or LCD */
+#define DISPLAY_MODEL_LASI 2		/* LASI style 8 bit LED */
+#define DISPLAY_MODEL_OLD_ASP 0x7F	/* faked: ASP style 8 x 1 bit LED (only very old ASP versions) */
+
+#define LED_CMD_REG_NONE 0		/* NULL == no addr for the cmd register */
+
+/* register_led_driver() */
+int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long data_reg);
+
+/* registers the LED regions for procfs */
+void __init register_led_regions(void);
+
+#ifdef CONFIG_CHASSIS_LCD_LED
+/* writes a string to the LCD display (if possible on this h/w) */
+int lcd_print(const char *str);
+#else
+#define lcd_print(str)
+#endif
+
+/* main LED initialization function (uses PDC) */ 
+int __init led_init(void);
+
+#endif /* LED_H */
diff --git a/arch/parisc/include/asm/linkage.h b/arch/parisc/include/asm/linkage.h
new file mode 100644
index 0000000..0b19a72
--- /dev/null
+++ b/arch/parisc/include/asm/linkage.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_PARISC_LINKAGE_H
+#define __ASM_PARISC_LINKAGE_H
+
+#ifndef __ALIGN
+#define __ALIGN         .align 4
+#define __ALIGN_STR     ".align 4"
+#endif
+
+/*
+ * In parisc assembly a semicolon marks a comment while a
+ * exclamation mark is used to separate independent lines.
+ */
+#ifdef __ASSEMBLY__
+
+#define ENTRY(name) \
+	.export name !\
+	ALIGN !\
+name:
+
+#ifdef CONFIG_64BIT
+#define ENDPROC(name) \
+	END(name)
+#else
+#define ENDPROC(name) \
+	.type name, @function !\
+	END(name)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif  /* __ASM_PARISC_LINKAGE_H */
diff --git a/arch/parisc/include/asm/local.h b/arch/parisc/include/asm/local.h
new file mode 100644
index 0000000..c11c530
--- /dev/null
+++ b/arch/parisc/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/parisc/include/asm/machdep.h b/arch/parisc/include/asm/machdep.h
new file mode 100644
index 0000000..a231c97
--- /dev/null
+++ b/arch/parisc/include/asm/machdep.h
@@ -0,0 +1,16 @@
+#ifndef _PARISC_MACHDEP_H
+#define _PARISC_MACHDEP_H
+
+#include <linux/notifier.h>
+
+#define	MACH_RESTART	1
+#define	MACH_HALT	2
+#define MACH_POWER_ON	3
+#define	MACH_POWER_OFF	4
+
+extern struct notifier_block *mach_notifier;
+extern void pa7300lc_init(void);
+
+extern void (*cpu_lpmc)(int, struct pt_regs *);
+
+#endif
diff --git a/arch/parisc/include/asm/mc146818rtc.h b/arch/parisc/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..adf4163
--- /dev/null
+++ b/arch/parisc/include/asm/mc146818rtc.h
@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c */
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/parisc/include/asm/mckinley.h b/arch/parisc/include/asm/mckinley.h
new file mode 100644
index 0000000..d1ea6f1
--- /dev/null
+++ b/arch/parisc/include/asm/mckinley.h
@@ -0,0 +1,9 @@
+#ifndef ASM_PARISC_MCKINLEY_H
+#define ASM_PARISC_MCKINLEY_H
+#ifdef __KERNEL__
+
+/* declared in arch/parisc/kernel/setup.c */
+extern struct proc_dir_entry * proc_mckinley_root;
+
+#endif /*__KERNEL__*/
+#endif /*ASM_PARISC_MCKINLEY_H*/
diff --git a/arch/parisc/include/asm/mman.h b/arch/parisc/include/asm/mman.h
new file mode 100644
index 0000000..defe752
--- /dev/null
+++ b/arch/parisc/include/asm/mman.h
@@ -0,0 +1,61 @@
+#ifndef __PARISC_MMAN_H__
+#define __PARISC_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x03		/* Mask for type of mapping */
+#define MAP_FIXED	0x04		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x10		/* don't use a file */
+
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_GROWSDOWN	0x8000		/* stack-like segment */
+#define MAP_POPULATE	0x10000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x20000		/* do not block on IO */
+
+#define MS_SYNC		1		/* synchronous memory sync */
+#define MS_ASYNC	2		/* sync memory asynchronously */
+#define MS_INVALIDATE	4		/* invalidate the caches */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL     0               /* no further special treatment */
+#define MADV_RANDOM     1               /* expect random page references */
+#define MADV_SEQUENTIAL 2               /* expect sequential page references */
+#define MADV_WILLNEED   3               /* will need these pages */
+#define MADV_DONTNEED   4               /* don't need these pages */
+#define MADV_SPACEAVAIL 5               /* insure that resources are reserved */
+#define MADV_VPS_PURGE  6               /* Purge pages from VM page cache */
+#define MADV_VPS_INHERIT 7              /* Inherit parents page size */
+
+/* common/generic parameters */
+#define MADV_REMOVE	9		/* remove these pages & resources */
+#define MADV_DONTFORK	10		/* don't inherit across fork */
+#define MADV_DOFORK	11		/* do inherit across fork */
+
+/* The range 12-64 is reserved for page size specification. */
+#define MADV_4K_PAGES   12              /* Use 4K pages  */
+#define MADV_16K_PAGES  14              /* Use 16K pages */
+#define MADV_64K_PAGES  16              /* Use 64K pages */
+#define MADV_256K_PAGES 18              /* Use 256K pages */
+#define MADV_1M_PAGES   20              /* Use 1 Megabyte pages */
+#define MADV_4M_PAGES   22              /* Use 4 Megabyte pages */
+#define MADV_16M_PAGES  24              /* Use 16 Megabyte pages */
+#define MADV_64M_PAGES  26              /* Use 64 Megabyte pages */
+
+/* compatibility flags */
+#define MAP_FILE	0
+#define MAP_VARIABLE	0
+
+#endif /* __PARISC_MMAN_H__ */
diff --git a/arch/parisc/include/asm/mmu.h b/arch/parisc/include/asm/mmu.h
new file mode 100644
index 0000000..6a310cf
--- /dev/null
+++ b/arch/parisc/include/asm/mmu.h
@@ -0,0 +1,7 @@
+#ifndef _PARISC_MMU_H_
+#define _PARISC_MMU_H_
+
+/* On parisc, we store the space id here */
+typedef unsigned long mm_context_t;
+
+#endif /* _PARISC_MMU_H_ */
diff --git a/arch/parisc/include/asm/mmu_context.h b/arch/parisc/include/asm/mmu_context.h
new file mode 100644
index 0000000..85856c7
--- /dev/null
+++ b/arch/parisc/include/asm/mmu_context.h
@@ -0,0 +1,75 @@
+#ifndef __PARISC_MMU_CONTEXT_H
+#define __PARISC_MMU_CONTEXT_H
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/* on PA-RISC, we actually have enough contexts to justify an allocator
+ * for them.  prumpf */
+
+extern unsigned long alloc_sid(void);
+extern void free_sid(unsigned long);
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	BUG_ON(atomic_read(&mm->mm_users) != 1);
+
+	mm->context = alloc_sid();
+	return 0;
+}
+
+static inline void
+destroy_context(struct mm_struct *mm)
+{
+	free_sid(mm->context);
+	mm->context = 0;
+}
+
+static inline void load_context(mm_context_t context)
+{
+	mtsp(context, 3);
+#if SPACEID_SHIFT == 0
+	mtctl(context << 1,8);
+#else
+	mtctl(context >> (SPACEID_SHIFT - 1),8);
+#endif
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+
+	if (prev != next) {
+		mtctl(__pa(next->pgd), 25);
+		load_context(next->context);
+	}
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	/*
+	 * Activate_mm is our one chance to allocate a space id
+	 * for a new mm created in the exec path. There's also
+	 * some lazy tlb stuff, which is currently dead code, but
+	 * we only allocate a space id if one hasn't been allocated
+	 * already, so we should be OK.
+	 */
+
+	BUG_ON(next == &init_mm); /* Should never happen */
+
+	if (next->context == 0)
+	    next->context = alloc_sid();
+
+	switch_mm(prev,next,current);
+}
+#endif
diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h
new file mode 100644
index 0000000..9608d2c
--- /dev/null
+++ b/arch/parisc/include/asm/mmzone.h
@@ -0,0 +1,73 @@
+#ifndef _PARISC_MMZONE_H
+#define _PARISC_MMZONE_H
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#define MAX_PHYSMEM_RANGES 8 /* Fix the size for now (current known max is 3) */
+extern int npmem_ranges;
+
+struct node_map_data {
+    pg_data_t pg_data;
+};
+
+extern struct node_map_data node_data[];
+
+#define NODE_DATA(nid)          (&node_data[nid].pg_data)
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)						\
+({									\
+	pg_data_t *__pgdat = NODE_DATA(nid);				\
+	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
+})
+
+/* We have these possible memory map layouts:
+ * Astro: 0-3.75, 67.75-68, 4-64
+ * zx1: 0-1, 257-260, 4-256
+ * Stretch (N-class): 0-2, 4-32, 34-xxx
+ */
+
+/* Since each 1GB can only belong to one region (node), we can create
+ * an index table for pfn to nid lookup; each entry in pfnnid_map 
+ * represents 1GB, and contains the node that the memory belongs to. */
+
+#define PFNNID_SHIFT (30 - PAGE_SHIFT)
+#define PFNNID_MAP_MAX  512     /* support 512GB */
+extern unsigned char pfnnid_map[PFNNID_MAP_MAX];
+
+#ifndef CONFIG_64BIT
+#define pfn_is_io(pfn) ((pfn & (0xf0000000UL >> PAGE_SHIFT)) == (0xf0000000UL >> PAGE_SHIFT))
+#else
+/* io can be 0xf0f0f0f0f0xxxxxx or 0xfffffffff0000000 */
+#define pfn_is_io(pfn) ((pfn & (0xf000000000000000UL >> PAGE_SHIFT)) == (0xf000000000000000UL >> PAGE_SHIFT))
+#endif
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+	unsigned int i;
+	unsigned char r;
+
+	if (unlikely(pfn_is_io(pfn)))
+		return 0;
+
+	i = pfn >> PFNNID_SHIFT;
+	BUG_ON(i >= sizeof(pfnnid_map) / sizeof(pfnnid_map[0]));
+	r = pfnnid_map[i];
+	BUG_ON(r == 0xff);
+
+	return (int)r;
+}
+
+static inline int pfn_valid(int pfn)
+{
+	int nid = pfn_to_nid(pfn);
+
+	if (nid >= 0)
+		return (pfn < node_end_pfn(nid));
+	return 0;
+}
+
+#else /* !CONFIG_DISCONTIGMEM */
+#define MAX_PHYSMEM_RANGES 	1 
+#endif
+#endif /* _PARISC_MMZONE_H */
diff --git a/arch/parisc/include/asm/module.h b/arch/parisc/include/asm/module.h
new file mode 100644
index 0000000..c2cb49e
--- /dev/null
+++ b/arch/parisc/include/asm/module.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_PARISC_MODULE_H
+#define _ASM_PARISC_MODULE_H
+/*
+ * This file contains the parisc architecture specific module code.
+ */
+#ifdef CONFIG_64BIT
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#define Elf_Addr Elf64_Addr
+#define Elf_Rela Elf64_Rela
+#else
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#define Elf_Addr Elf32_Addr
+#define Elf_Rela Elf32_Rela
+#endif
+
+struct unwind_table;
+
+struct mod_arch_specific
+{
+	unsigned long got_offset, got_count, got_max;
+	unsigned long fdesc_offset, fdesc_count, fdesc_max;
+	unsigned long stub_offset, stub_count, stub_max;
+	unsigned long init_stub_offset, init_stub_count, init_stub_max;
+	int unwind_section;
+	struct unwind_table *unwind;
+};
+
+#endif /* _ASM_PARISC_MODULE_H */
diff --git a/arch/parisc/include/asm/msgbuf.h b/arch/parisc/include/asm/msgbuf.h
new file mode 100644
index 0000000..fe88f26
--- /dev/null
+++ b/arch/parisc/include/asm/msgbuf.h
@@ -0,0 +1,37 @@
+#ifndef _PARISC_MSGBUF_H
+#define _PARISC_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for parisc architecture, copied from sparc.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+#ifndef CONFIG_64BIT
+	unsigned int   __pad1;
+#endif
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#ifndef CONFIG_64BIT
+	unsigned int   __pad2;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#ifndef CONFIG_64BIT
+	unsigned int   __pad3;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned int  msg_cbytes;	/* current number of bytes on queue */
+	unsigned int  msg_qnum;	/* number of messages in queue */
+	unsigned int  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned int  __unused1;
+	unsigned int  __unused2;
+};
+
+#endif /* _PARISC_MSGBUF_H */
diff --git a/arch/parisc/include/asm/mutex.h b/arch/parisc/include/asm/mutex.h
new file mode 100644
index 0000000..458c1f7
--- /dev/null
+++ b/arch/parisc/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
new file mode 100644
index 0000000..c3941f0
--- /dev/null
+++ b/arch/parisc/include/asm/page.h
@@ -0,0 +1,173 @@
+#ifndef _PARISC_PAGE_H
+#define _PARISC_PAGE_H
+
+#include <linux/const.h>
+
+#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12
+#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB)
+# define PAGE_SHIFT	14
+#elif defined(CONFIG_PARISC_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16
+#else
+# error "unknown default kernel page size"
+#endif
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+#include <asm/cache.h>
+
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from)      copy_user_page_asm((void *)(to), (void *)(from))
+
+struct page;
+
+void copy_user_page_asm(void *to, void *from);
+void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+			   struct page *pg);
+void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#define STRICT_MM_TYPECHECKS
+#ifdef STRICT_MM_TYPECHECKS
+typedef struct { unsigned long pte;
+#if !defined(CONFIG_64BIT)
+                 unsigned long future_flags;
+ /* XXX: it's possible to remove future_flags and change BITS_PER_PTE_ENTRY
+	 to 2, but then strangely the identical 32bit kernel boots on a
+	 c3000(pa20), but not any longer on a 715(pa11).
+	 Still investigating... HelgeD.
+  */
+#endif
+} pte_t; /* either 32 or 64bit */
+
+/* NOTE: even on 64 bits, these entries are __u32 because we allocate
+ * the pmd and pgd in ZONE_DMA (i.e. under 4GB) */
+typedef struct { __u32 pmd; } pmd_t;
+typedef struct { __u32 pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+/* These do not work lvalues, so make sure we don't use them as such. */
+#define pmd_val(x)	((x).pmd + 0)
+#define pgd_val(x)	((x).pgd + 0)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#define __pmd_val_set(x,n) (x).pmd = (n)
+#define __pgd_val_set(x,n) (x).pgd = (n)
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef         __u32 pmd_t;
+typedef         __u32 pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)      (x)
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)	(x)
+#define __pgd(x)        (x)
+#define __pgprot(x)     (x)
+
+#define __pmd_val_set(x,n) (x) = (n)
+#define __pgd_val_set(x,n) (x) = (n)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+typedef struct page *pgtable_t;
+
+typedef struct __physmem_range {
+	unsigned long start_pfn;
+	unsigned long pages;       /* PAGE_SIZE pages */
+} physmem_range_t;
+
+extern physmem_range_t pmem_ranges[];
+extern int npmem_ranges;
+
+#endif /* !__ASSEMBLY__ */
+
+/* WARNING: The definitions below must match exactly to sizeof(pte_t)
+ * etc
+ */
+#ifdef CONFIG_64BIT
+#define BITS_PER_PTE_ENTRY	3
+#define BITS_PER_PMD_ENTRY	2
+#define BITS_PER_PGD_ENTRY	2
+#else
+#define BITS_PER_PTE_ENTRY	3
+#define BITS_PER_PMD_ENTRY	2
+#define BITS_PER_PGD_ENTRY	BITS_PER_PMD_ENTRY
+#endif
+#define PGD_ENTRY_SIZE	(1UL << BITS_PER_PGD_ENTRY)
+#define PMD_ENTRY_SIZE	(1UL << BITS_PER_PMD_ENTRY)
+#define PTE_ENTRY_SIZE	(1UL << BITS_PER_PTE_ENTRY)
+
+#define LINUX_GATEWAY_SPACE     0
+
+/* This governs the relationship between virtual and physical addresses.
+ * If you alter it, make sure to take care of our various fixed mapping
+ * segments in fixmap.h */
+#ifdef CONFIG_64BIT
+#define __PAGE_OFFSET	(0x40000000)	/* 1GB */
+#else
+#define __PAGE_OFFSET	(0x10000000)	/* 256MB */
+#endif
+
+#define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
+
+/* The size of the gateway page (we leave lots of room for expansion) */
+#define GATEWAY_PAGE_SIZE	0x4000
+
+/* The start of the actual kernel binary---used in vmlinux.lds.S
+ * Leave some space after __PAGE_OFFSET for detecting kernel null
+ * ptr derefs */
+#define KERNEL_BINARY_TEXT_START	(__PAGE_OFFSET + 0x100000)
+
+/* These macros don't work for 64-bit C code -- don't allow in C at all */
+#ifdef __ASSEMBLY__
+#   define PA(x)	((x)-__PAGE_OFFSET)
+#   define VA(x)	((x)+__PAGE_OFFSET)
+#endif
+#define __pa(x)			((unsigned long)(x)-PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#endif /* CONFIG_DISCONTIGMEM */
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SHIFT		22	/* 4MB (is this fixed?) */
+#define HPAGE_SIZE      	((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#endif
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _PARISC_PAGE_H */
diff --git a/arch/parisc/include/asm/param.h b/arch/parisc/include/asm/param.h
new file mode 100644
index 0000000..32e03d8
--- /dev/null
+++ b/arch/parisc/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASMPARISC_PARAM_H
+#define _ASMPARISC_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ		CONFIG_HZ
+#define USER_HZ		100		/* some user API use "ticks" */
+#define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/arch/parisc/include/asm/parisc-device.h b/arch/parisc/include/asm/parisc-device.h
new file mode 100644
index 0000000..7aa13f2
--- /dev/null
+++ b/arch/parisc/include/asm/parisc-device.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_PARISC_PARISC_DEVICE_H_
+#define _ASM_PARISC_PARISC_DEVICE_H_
+
+#include <linux/device.h>
+
+struct parisc_device {
+	struct resource hpa;		/* Hard Physical Address */
+	struct parisc_device_id id;
+	struct parisc_driver *driver;	/* Driver for this device */
+	char		name[80];	/* The hardware description */
+	int		irq;
+	int		aux_irq;	/* Some devices have a second IRQ */
+
+	char		hw_path;        /* The module number on this bus */
+	unsigned int	num_addrs;	/* some devices have additional address ranges. */
+	unsigned long	*addr;          /* which will be stored here */
+ 
+#ifdef CONFIG_64BIT
+	/* parms for pdc_pat_cell_module() call */
+	unsigned long	pcell_loc;	/* Physical Cell location */
+	unsigned long	mod_index;	/* PAT specific - Misc Module info */
+
+	/* generic info returned from pdc_pat_cell_module() */
+	unsigned long	mod_info;	/* PAT specific - Misc Module info */
+	unsigned long	pmod_loc;	/* physical Module location */
+#endif
+	u64		dma_mask;	/* DMA mask for I/O */
+	struct device 	dev;
+};
+
+struct parisc_driver {
+	struct parisc_driver *next;
+	char *name; 
+	const struct parisc_device_id *id_table;
+	int (*probe) (struct parisc_device *dev); /* New device discovered */
+	int (*remove) (struct parisc_device *dev);
+	struct device_driver drv;
+};
+
+
+#define to_parisc_device(d)	container_of(d, struct parisc_device, dev)
+#define to_parisc_driver(d)	container_of(d, struct parisc_driver, drv)
+#define parisc_parent(d)	to_parisc_device(d->dev.parent)
+
+static inline char *parisc_pathname(struct parisc_device *d)
+{
+	return d->dev.bus_id;
+}
+
+static inline void
+parisc_set_drvdata(struct parisc_device *d, void *p)
+{
+	dev_set_drvdata(&d->dev, p);
+}
+
+static inline void *
+parisc_get_drvdata(struct parisc_device *d)
+{
+	return dev_get_drvdata(&d->dev);
+}
+
+extern struct bus_type parisc_bus_type;
+
+#endif /*_ASM_PARISC_PARISC_DEVICE_H_*/
diff --git a/arch/parisc/include/asm/parport.h b/arch/parisc/include/asm/parport.h
new file mode 100644
index 0000000..00d9cc3
--- /dev/null
+++ b/arch/parisc/include/asm/parport.h
@@ -0,0 +1,18 @@
+/* 
+ *
+ * parport.h: ia32-compatible parport initialisation
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+#ifndef _ASM_PARPORT_H
+#define _ASM_PARPORT_H 1
+
+
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	/* nothing ! */
+	return 0;
+}
+
+
+#endif /* !(_ASM_PARPORT_H) */
diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h
new file mode 100644
index 0000000..4ba868f
--- /dev/null
+++ b/arch/parisc/include/asm/pci.h
@@ -0,0 +1,294 @@
+#ifndef __ASM_PARISC_PCI_H
+#define __ASM_PARISC_PCI_H
+
+#include <asm/scatterlist.h>
+
+
+
+/*
+** HP PCI platforms generally support multiple bus adapters.
+**    (workstations 1-~4, servers 2-~32)
+**
+** Newer platforms number the busses across PCI bus adapters *sparsely*.
+** E.g. 0, 8, 16, ...
+**
+** Under a PCI bus, most HP platforms support PPBs up to two or three
+** levels deep. See "Bit3" product line. 
+*/
+#define PCI_MAX_BUSSES	256
+
+
+/* To be used as: mdelay(pci_post_reset_delay);
+ *
+ * post_reset is the time the kernel should stall to prevent anyone from
+ * accessing the PCI bus once #RESET is de-asserted. 
+ * PCI spec somewhere says 1 second but with multi-PCI bus systems,
+ * this makes the boot time much longer than necessary.
+ * 20ms seems to work for all the HP PCI implementations to date.
+ */
+#define pci_post_reset_delay 50
+
+
+/*
+** pci_hba_data (aka H2P_OBJECT in HP/UX)
+**
+** This is the "common" or "base" data structure which HBA drivers
+** (eg Dino or LBA) are required to place at the top of their own
+** platform_data structure.  I've heard this called "C inheritance" too.
+**
+** Data needed by pcibios layer belongs here.
+*/
+struct pci_hba_data {
+	void __iomem   *base_addr;	/* aka Host Physical Address */
+	const struct parisc_device *dev; /* device from PA bus walk */
+	struct pci_bus *hba_bus;	/* primary PCI bus below HBA */
+	int		hba_num;	/* I/O port space access "key" */
+	struct resource bus_num;	/* PCI bus numbers */
+	struct resource io_space;	/* PIOP */
+	struct resource lmmio_space;	/* bus addresses < 4Gb */
+	struct resource elmmio_space;	/* additional bus addresses < 4Gb */
+	struct resource gmmio_space;	/* bus addresses > 4Gb */
+
+	/* NOTE: Dino code assumes it can use *all* of the lmmio_space,
+	 * elmmio_space and gmmio_space as a contiguous array of
+	 * resources.  This #define represents the array size */
+	#define DINO_MAX_LMMIO_RESOURCES	3
+
+	unsigned long   lmmio_space_offset;  /* CPU view - PCI view */
+	void *          iommu;          /* IOMMU this device is under */
+	/* REVISIT - spinlock to protect resources? */
+
+	#define HBA_NAME_SIZE 16
+	char io_name[HBA_NAME_SIZE];
+	char lmmio_name[HBA_NAME_SIZE];
+	char elmmio_name[HBA_NAME_SIZE];
+	char gmmio_name[HBA_NAME_SIZE];
+};
+
+#define HBA_DATA(d)		((struct pci_hba_data *) (d))
+
+/* 
+** We support 2^16 I/O ports per HBA.  These are set up in the form
+** 0xbbxxxx, where bb is the bus number and xxxx is the I/O port
+** space address.
+*/
+#define HBA_PORT_SPACE_BITS	16
+
+#define HBA_PORT_BASE(h)	((h) << HBA_PORT_SPACE_BITS)
+#define HBA_PORT_SPACE_SIZE	(1UL << HBA_PORT_SPACE_BITS)
+
+#define PCI_PORT_HBA(a)		((a) >> HBA_PORT_SPACE_BITS)
+#define PCI_PORT_ADDR(a)	((a) & (HBA_PORT_SPACE_SIZE - 1))
+
+#ifdef CONFIG_64BIT
+#define PCI_F_EXTEND		0xffffffff00000000UL
+#define PCI_IS_LMMIO(hba,a)	pci_is_lmmio(hba,a)
+
+/* We need to know if an address is LMMMIO or GMMIO.
+ * LMMIO requires mangling and GMMIO we must use as-is.
+ */
+static __inline__  int pci_is_lmmio(struct pci_hba_data *hba, unsigned long a)
+{
+	return(((a) & PCI_F_EXTEND) == PCI_F_EXTEND);
+}
+
+/*
+** Convert between PCI (IO_VIEW) addresses and processor (PA_VIEW) addresses.
+** See pci.c for more conversions used by Generic PCI code.
+**
+** Platform characteristics/firmware guarantee that
+**	(1) PA_VIEW - IO_VIEW = lmmio_offset for both LMMIO and ELMMIO
+**	(2) PA_VIEW == IO_VIEW for GMMIO
+*/
+#define PCI_BUS_ADDR(hba,a)	(PCI_IS_LMMIO(hba,a)	\
+		?  ((a) - hba->lmmio_space_offset)	/* mangle LMMIO */ \
+		: (a))					/* GMMIO */
+#define PCI_HOST_ADDR(hba,a)	(((a) & PCI_F_EXTEND) == 0 \
+		? (a) + hba->lmmio_space_offset \
+		: (a))
+
+#else	/* !CONFIG_64BIT */
+
+#define PCI_BUS_ADDR(hba,a)	(a)
+#define PCI_HOST_ADDR(hba,a)	(a)
+#define PCI_F_EXTEND		0UL
+#define PCI_IS_LMMIO(hba,a)	(1)	/* 32-bit doesn't support GMMIO */
+
+#endif /* !CONFIG_64BIT */
+
+/*
+** KLUGE: linux/pci.h include asm/pci.h BEFORE declaring struct pci_bus
+** (This eliminates some of the warnings).
+*/
+struct pci_bus;
+struct pci_dev;
+
+/*
+ * If the PCI device's view of memory is the same as the CPU's view of memory,
+ * PCI_DMA_BUS_IS_PHYS is true.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#ifdef CONFIG_PA20
+/* All PA-2.0 machines have an IOMMU. */
+#define PCI_DMA_BUS_IS_PHYS	0
+#define parisc_has_iommu()	do { } while (0)
+#else
+
+#if defined(CONFIG_IOMMU_CCIO) || defined(CONFIG_IOMMU_SBA)
+extern int parisc_bus_is_phys; 	/* in arch/parisc/kernel/setup.c */
+#define PCI_DMA_BUS_IS_PHYS	parisc_bus_is_phys
+#define parisc_has_iommu()	do { parisc_bus_is_phys = 0; } while (0)
+#else
+#define PCI_DMA_BUS_IS_PHYS	1
+#define parisc_has_iommu()	do { } while (0)
+#endif
+
+#endif	/* !CONFIG_PA20 */
+
+
+/*
+** Most PCI devices (eg Tulip, NCR720) also export the same registers
+** to both MMIO and I/O port space.  Due to poor performance of I/O Port
+** access under HP PCI bus adapters, strongly recommend the use of MMIO
+** address space.
+**
+** While I'm at it more PA programming notes:
+**
+** 1) MMIO stores (writes) are posted operations. This means the processor
+**    gets an "ACK" before the write actually gets to the device. A read
+**    to the same device (or typically the bus adapter above it) will
+**    force in-flight write transaction(s) out to the targeted device
+**    before the read can complete.
+**
+** 2) The Programmed I/O (PIO) data may not always be strongly ordered with
+**    respect to DMA on all platforms. Ie PIO data can reach the processor
+**    before in-flight DMA reaches memory. Since most SMP PA platforms
+**    are I/O coherent, it generally doesn't matter...but sometimes
+**    it does.
+**
+** I've helped device driver writers debug both types of problems.
+*/
+struct pci_port_ops {
+	  u8 (*inb)  (struct pci_hba_data *hba, u16 port);
+	 u16 (*inw)  (struct pci_hba_data *hba, u16 port);
+	 u32 (*inl)  (struct pci_hba_data *hba, u16 port);
+	void (*outb) (struct pci_hba_data *hba, u16 port,  u8 data);
+	void (*outw) (struct pci_hba_data *hba, u16 port, u16 data);
+	void (*outl) (struct pci_hba_data *hba, u16 port, u32 data);
+};
+
+
+struct pci_bios_ops {
+	void (*init)(void);
+	void (*fixup_bus)(struct pci_bus *bus);
+};
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/*
+** Stuff declared in arch/parisc/kernel/pci.c
+*/
+extern struct pci_port_ops *pci_port;
+extern struct pci_bios_ops *pci_bios;
+
+#ifdef CONFIG_PCI
+extern void pcibios_register_hba(struct pci_hba_data *);
+extern void pcibios_set_master(struct pci_dev *);
+#else
+static inline void pcibios_register_hba(struct pci_hba_data *x)
+{
+}
+#endif
+
+/*
+ * pcibios_assign_all_busses() is used in drivers/pci/pci.c:pci_do_scan_bus()
+ *   0 == check if bridge is numbered before re-numbering.
+ *   1 == pci_do_scan_bus() should automatically number all PCI-PCI bridges.
+ *
+ *   We *should* set this to zero for "legacy" platforms and one
+ *   for PAT platforms.
+ *
+ *   But legacy platforms also need to renumber the busses below a Host
+ *   Bus controller.  Adding a 4-port Tulip card on the first PCI root
+ *   bus of a C200 resulted in the secondary bus being numbered as 1.
+ *   The second PCI host bus controller's root bus had already been
+ *   assigned bus number 1 by firmware and sysfs complained.
+ *
+ *   Firmware isn't doing anything wrong here since each controller
+ *   is its own PCI domain.  It's simpler and easier for us to renumber
+ *   the busses rather than treat each Dino as a separate PCI domain.
+ *   Eventually, we may want to introduce PCI domains for Superdome or
+ *   rp7420/8420 boxes and then revisit this issue.
+ */
+#define pcibios_assign_all_busses()     (1)
+#define pcibios_scan_all_fns(a, b)	(0)
+
+#define PCIBIOS_MIN_IO          0x10
+#define PCIBIOS_MIN_MEM         0x1000 /* NBPG - but pci/setup-res.c dies */
+
+/* export the pci_ DMA API in terms of the dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			 struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't need to penalize isa irq's */
+}
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
+
+#endif /* __ASM_PARISC_PCI_H */
diff --git a/arch/parisc/include/asm/pdc.h b/arch/parisc/include/asm/pdc.h
new file mode 100644
index 0000000..c584b00
--- /dev/null
+++ b/arch/parisc/include/asm/pdc.h
@@ -0,0 +1,762 @@
+#ifndef _PARISC_PDC_H
+#define _PARISC_PDC_H
+
+/*
+ *	PDC return values ...
+ *	All PDC calls return a subset of these errors. 
+ */
+
+#define PDC_WARN		  3	/* Call completed with a warning */
+#define PDC_REQ_ERR_1		  2	/* See above			 */
+#define PDC_REQ_ERR_0		  1	/* Call would generate a requestor error */
+#define PDC_OK			  0	/* Call completed successfully	*/
+#define PDC_BAD_PROC		 -1	/* Called non-existent procedure*/
+#define PDC_BAD_OPTION		 -2	/* Called with non-existent option */
+#define PDC_ERROR		 -3	/* Call could not complete without an error */
+#define PDC_NE_MOD		 -5	/* Module not found		*/
+#define PDC_NE_CELL_MOD		 -7	/* Cell module not found	*/
+#define PDC_INVALID_ARG		-10	/* Called with an invalid argument */
+#define PDC_BUS_POW_WARN	-12	/* Call could not complete in allowed power budget */
+#define PDC_NOT_NARROW		-17	/* Narrow mode not supported	*/
+
+/*
+ *	PDC entry points...
+ */
+
+#define PDC_POW_FAIL	1		/* perform a power-fail		*/
+#define PDC_POW_FAIL_PREPARE	0	/* prepare for powerfail	*/
+
+#define PDC_CHASSIS	2		/* PDC-chassis functions	*/
+#define PDC_CHASSIS_DISP	0	/* update chassis display	*/
+#define PDC_CHASSIS_WARN	1	/* return chassis warnings	*/
+#define PDC_CHASSIS_DISPWARN	2	/* update&return chassis status */
+#define PDC_RETURN_CHASSIS_INFO 128	/* HVERSION dependent: return chassis LED/LCD info  */
+
+#define PDC_PIM         3               /* Get PIM data                 */
+#define PDC_PIM_HPMC            0       /* Transfer HPMC data           */
+#define PDC_PIM_RETURN_SIZE     1       /* Get Max buffer needed for PIM*/
+#define PDC_PIM_LPMC            2       /* Transfer HPMC data           */
+#define PDC_PIM_SOFT_BOOT       3       /* Transfer Soft Boot data      */
+#define PDC_PIM_TOC             4       /* Transfer TOC data            */
+
+#define PDC_MODEL	4		/* PDC model information call	*/
+#define PDC_MODEL_INFO		0	/* returns information 		*/
+#define PDC_MODEL_BOOTID	1	/* set the BOOT_ID		*/
+#define PDC_MODEL_VERSIONS	2	/* returns cpu-internal versions*/
+#define PDC_MODEL_SYSMODEL	3	/* return system model info	*/
+#define PDC_MODEL_ENSPEC	4	/* enable specific option	*/
+#define PDC_MODEL_DISPEC	5	/* disable specific option	*/
+#define PDC_MODEL_CPU_ID	6	/* returns cpu-id (only newer machines!) */
+#define PDC_MODEL_CAPABILITIES	7	/* returns OS32/OS64-flags	*/
+/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
+#define  PDC_MODEL_IOPDIR_FDC		(1 << 2)
+#define  PDC_MODEL_NVA_MASK		(3 << 4)
+#define  PDC_MODEL_NVA_SUPPORTED	(0 << 4)
+#define  PDC_MODEL_NVA_SLOW		(1 << 4)
+#define  PDC_MODEL_NVA_UNSUPPORTED	(3 << 4)
+#define PDC_MODEL_GET_BOOT__OP	8	/* returns boot test options	*/
+#define PDC_MODEL_SET_BOOT__OP	9	/* set boot test options	*/
+
+#define PA89_INSTRUCTION_SET	0x4	/* capatibilies returned	*/
+#define PA90_INSTRUCTION_SET	0x8
+
+#define PDC_CACHE	5		/* return/set cache (& TLB) info*/
+#define PDC_CACHE_INFO		0	/* returns information 		*/
+#define PDC_CACHE_SET_COH	1	/* set coherence state		*/
+#define PDC_CACHE_RET_SPID	2	/* returns space-ID bits	*/
+
+#define PDC_HPA		6		/* return HPA of processor	*/
+#define PDC_HPA_PROCESSOR	0
+#define PDC_HPA_MODULES		1
+
+#define PDC_COPROC	7		/* Co-Processor (usually FP unit(s)) */
+#define PDC_COPROC_CFG		0	/* Co-Processor Cfg (FP unit(s) enabled?) */
+
+#define PDC_IODC	8		/* talk to IODC			*/
+#define PDC_IODC_READ		0	/* read IODC entry point	*/
+/*      PDC_IODC_RI_			 * INDEX parameter of PDC_IODC_READ */
+#define PDC_IODC_RI_DATA_BYTES	0	/* IODC Data Bytes		*/
+/*				1, 2	   obsolete - HVERSION dependent*/
+#define PDC_IODC_RI_INIT	3	/* Initialize module		*/
+#define PDC_IODC_RI_IO		4	/* Module input/output		*/
+#define PDC_IODC_RI_SPA		5	/* Module input/output		*/
+#define PDC_IODC_RI_CONFIG	6	/* Module input/output		*/
+/*				7	  obsolete - HVERSION dependent */
+#define PDC_IODC_RI_TEST	8	/* Module input/output		*/
+#define PDC_IODC_RI_TLB		9	/* Module input/output		*/
+#define PDC_IODC_NINIT		2	/* non-destructive init		*/
+#define PDC_IODC_DINIT		3	/* destructive init		*/
+#define PDC_IODC_MEMERR		4	/* check for memory errors	*/
+#define PDC_IODC_INDEX_DATA	0	/* get first 16 bytes from mod IODC */
+#define PDC_IODC_BUS_ERROR	-4	/* bus error return value	*/
+#define PDC_IODC_INVALID_INDEX	-5	/* invalid index return value	*/
+#define PDC_IODC_COUNT		-6	/* count is too small		*/
+
+#define PDC_TOD		9		/* time-of-day clock (TOD)	*/
+#define PDC_TOD_READ		0	/* read TOD			*/
+#define PDC_TOD_WRITE		1	/* write TOD			*/
+
+
+#define PDC_STABLE	10		/* stable storage (sprockets)	*/
+#define PDC_STABLE_READ		0
+#define PDC_STABLE_WRITE	1
+#define PDC_STABLE_RETURN_SIZE	2
+#define PDC_STABLE_VERIFY_CONTENTS 3
+#define PDC_STABLE_INITIALIZE	4
+
+#define PDC_NVOLATILE	11		/* often not implemented	*/
+
+#define PDC_ADD_VALID	12		/* Memory validation PDC call	*/
+#define PDC_ADD_VALID_VERIFY	0	/* Make PDC_ADD_VALID verify region */
+
+#define PDC_INSTR	15		/* get instr to invoke PDCE_CHECK() */
+
+#define PDC_PROC	16		/* (sprockets)			*/
+
+#define PDC_CONFIG	16		/* (sprockets)			*/
+#define PDC_CONFIG_DECONFIG	0
+#define PDC_CONFIG_DRECONFIG	1
+#define PDC_CONFIG_DRETURN_CONFIG 2
+
+#define PDC_BLOCK_TLB	18		/* manage hardware block-TLB	*/
+#define PDC_BTLB_INFO		0	/* returns parameter 		*/
+#define PDC_BTLB_INSERT		1	/* insert BTLB entry		*/
+#define PDC_BTLB_PURGE		2	/* purge BTLB entries 		*/
+#define PDC_BTLB_PURGE_ALL	3	/* purge all BTLB entries 	*/
+
+#define PDC_TLB		19		/* manage hardware TLB miss handling */
+#define PDC_TLB_INFO		0	/* returns parameter 		*/
+#define PDC_TLB_SETUP		1	/* set up miss handling 	*/
+
+#define PDC_MEM		20		/* Manage memory		*/
+#define PDC_MEM_MEMINFO		0
+#define PDC_MEM_ADD_PAGE	1
+#define PDC_MEM_CLEAR_PDT	2
+#define PDC_MEM_READ_PDT	3
+#define PDC_MEM_RESET_CLEAR	4
+#define PDC_MEM_GOODMEM		5
+#define PDC_MEM_TABLE		128	/* Non contig mem map (sprockets) */
+#define PDC_MEM_RETURN_ADDRESS_TABLE	PDC_MEM_TABLE
+#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE	131
+#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES	132
+#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
+
+#define PDC_MEM_RET_SBE_REPLACED	5	/* PDC_MEM return values */
+#define PDC_MEM_RET_DUPLICATE_ENTRY	4
+#define PDC_MEM_RET_BUF_SIZE_SMALL	1
+#define PDC_MEM_RET_PDT_FULL		-11
+#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
+
+#define PDC_PSW		21		/* Get/Set default System Mask  */
+#define PDC_PSW_MASK		0	/* Return mask                  */
+#define PDC_PSW_GET_DEFAULTS	1	/* Return defaults              */
+#define PDC_PSW_SET_DEFAULTS	2	/* Set default                  */
+#define PDC_PSW_ENDIAN_BIT	1	/* set for big endian           */
+#define PDC_PSW_WIDE_BIT	2	/* set for wide mode            */ 
+
+#define PDC_SYSTEM_MAP	22		/* find system modules		*/
+#define PDC_FIND_MODULE 	0
+#define PDC_FIND_ADDRESS	1
+#define PDC_TRANSLATE_PATH	2
+
+#define PDC_SOFT_POWER	23		/* soft power switch		*/
+#define PDC_SOFT_POWER_INFO	0	/* return info about the soft power switch */
+#define PDC_SOFT_POWER_ENABLE	1	/* enable/disable soft power switch */
+
+
+/* HVERSION dependent */
+
+/* The PDC_MEM_MAP calls */
+#define PDC_MEM_MAP	128		/* on s700: return page info	*/
+#define PDC_MEM_MAP_HPA		0	/* returns hpa of a module	*/
+
+#define PDC_EEPROM	129		/* EEPROM access		*/
+#define PDC_EEPROM_READ_WORD	0
+#define PDC_EEPROM_WRITE_WORD	1
+#define PDC_EEPROM_READ_BYTE	2
+#define PDC_EEPROM_WRITE_BYTE	3
+#define PDC_EEPROM_EEPROM_PASSWORD -1000
+
+#define PDC_NVM		130		/* NVM (non-volatile memory) access */
+#define PDC_NVM_READ_WORD	0
+#define PDC_NVM_WRITE_WORD	1
+#define PDC_NVM_READ_BYTE	2
+#define PDC_NVM_WRITE_BYTE	3
+
+#define PDC_SEED_ERROR	132		/* (sprockets)			*/
+
+#define PDC_IO		135		/* log error info, reset IO system */
+#define PDC_IO_READ_AND_CLEAR_ERRORS	0
+#define PDC_IO_RESET			1
+#define PDC_IO_RESET_DEVICES		2
+/* sets bits 6&7 (little endian) of the HcControl Register */
+#define PDC_IO_USB_SUSPEND	0xC000000000000000
+#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL	-5	/* return value */
+#define PDC_IO_NO_SUSPEND		-6	/* return value */
+
+#define PDC_BROADCAST_RESET 136		/* reset all processors		*/
+#define PDC_DO_RESET		0	/* option: perform a broadcast reset */
+#define PDC_DO_FIRM_TEST_RESET	1	/* Do broadcast reset with bitmap */
+#define PDC_BR_RECONFIGURATION	2	/* reset w/reconfiguration	*/
+#define PDC_FIRM_TEST_MAGIC	0xab9ec36fUL    /* for this reboot only	*/
+
+#define PDC_LAN_STATION_ID 138		/* Hversion dependent mechanism for */
+#define PDC_LAN_STATION_ID_READ	0	/* getting the lan station address  */
+
+#define	PDC_LAN_STATION_ID_SIZE	6
+
+#define PDC_CHECK_RANGES 139		/* (sprockets)			*/
+
+#define PDC_NV_SECTIONS	141		/* (sprockets)			*/
+
+#define PDC_PERFORMANCE	142		/* performance monitoring	*/
+
+#define PDC_SYSTEM_INFO	143		/* system information		*/
+#define PDC_SYSINFO_RETURN_INFO_SIZE	0
+#define PDC_SYSINFO_RRETURN_SYS_INFO	1
+#define PDC_SYSINFO_RRETURN_ERRORS	2
+#define PDC_SYSINFO_RRETURN_WARNINGS	3
+#define PDC_SYSINFO_RETURN_REVISIONS	4
+#define PDC_SYSINFO_RRETURN_DIAGNOSE	5
+#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE	1005
+
+#define PDC_RDR		144		/* (sprockets)			*/
+#define PDC_RDR_READ_BUFFER	0
+#define PDC_RDR_READ_SINGLE	1
+#define PDC_RDR_WRITE_SINGLE	2
+
+#define PDC_INTRIGUE	145 		/* (sprockets)			*/
+#define PDC_INTRIGUE_WRITE_BUFFER 	 0
+#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
+#define PDC_INTRIGUE_START_CPU_COUNTERS	 2
+#define PDC_INTRIGUE_STOP_CPU_COUNTERS	 3
+
+#define PDC_STI		146 		/* STI access			*/
+/* same as PDC_PCI_XXX values (see below) */
+
+/* Legacy PDC definitions for same stuff */
+#define PDC_PCI_INDEX	147
+#define PDC_PCI_INTERFACE_INFO		0
+#define PDC_PCI_SLOT_INFO		1
+#define PDC_PCI_INFLIGHT_BYTES		2
+#define PDC_PCI_READ_CONFIG		3
+#define PDC_PCI_WRITE_CONFIG		4
+#define PDC_PCI_READ_PCI_IO		5
+#define PDC_PCI_WRITE_PCI_IO		6
+#define PDC_PCI_READ_CONFIG_DELAY	7
+#define PDC_PCI_UPDATE_CONFIG_DELAY	8
+#define PDC_PCI_PCI_PATH_TO_PCI_HPA	9
+#define PDC_PCI_PCI_HPA_TO_PCI_PATH	10
+#define PDC_PCI_PCI_PATH_TO_PCI_BUS	11
+#define PDC_PCI_PCI_RESERVED		12
+#define PDC_PCI_PCI_INT_ROUTE_SIZE	13
+#define PDC_PCI_GET_INT_TBL_SIZE	PDC_PCI_PCI_INT_ROUTE_SIZE
+#define PDC_PCI_PCI_INT_ROUTE		14
+#define PDC_PCI_GET_INT_TBL		PDC_PCI_PCI_INT_ROUTE 
+#define PDC_PCI_READ_MON_TYPE		15
+#define PDC_PCI_WRITE_MON_TYPE		16
+
+
+/* Get SCSI Interface Card info:  SDTR, SCSI ID, mode (SE vs LVD) */
+#define PDC_INITIATOR	163
+#define PDC_GET_INITIATOR	0
+#define PDC_SET_INITIATOR	1
+#define PDC_DELETE_INITIATOR	2
+#define PDC_RETURN_TABLE_SIZE	3
+#define PDC_RETURN_TABLE	4
+
+#define PDC_LINK	165 		/* (sprockets)			*/
+#define PDC_LINK_PCI_ENTRY_POINTS	0  /* list (Arg1) = 0 */
+#define PDC_LINK_USB_ENTRY_POINTS	1  /* list (Arg1) = 1 */
+
+/* cl_class
+ * page 3-33 of IO-Firmware ARS
+ * IODC ENTRY_INIT(Search first) RET[1]
+ */
+#define	CL_NULL		0	/* invalid */
+#define	CL_RANDOM	1	/* random access (as disk) */
+#define	CL_SEQU		2	/* sequential access (as tape) */
+#define	CL_DUPLEX	7	/* full-duplex point-to-point (RS-232, Net) */
+#define	CL_KEYBD	8	/* half-duplex console (HIL Keyboard) */
+#define	CL_DISPL	9	/* half-duplex console (display) */
+#define	CL_FC		10	/* FiberChannel access media */
+
+/* IODC ENTRY_INIT() */
+#define ENTRY_INIT_SRCH_FRST	2
+#define ENTRY_INIT_SRCH_NEXT	3
+#define ENTRY_INIT_MOD_DEV	4
+#define ENTRY_INIT_DEV		5
+#define ENTRY_INIT_MOD		6
+#define ENTRY_INIT_MSG		9
+
+/* IODC ENTRY_IO() */
+#define ENTRY_IO_BOOTIN		0
+#define ENTRY_IO_BOOTOUT	1
+#define ENTRY_IO_CIN		2
+#define ENTRY_IO_COUT		3
+#define ENTRY_IO_CLOSE		4
+#define ENTRY_IO_GETMSG		9
+#define ENTRY_IO_BBLOCK_IN	16
+#define ENTRY_IO_BBLOCK_OUT	17
+
+/* IODC ENTRY_SPA() */
+
+/* IODC ENTRY_CONFIG() */
+
+/* IODC ENTRY_TEST() */
+
+/* IODC ENTRY_TLB() */
+
+/* constants for OS (NVM...) */
+#define OS_ID_NONE		0	/* Undefined OS ID	*/
+#define OS_ID_HPUX		1	/* HP-UX OS		*/
+#define OS_ID_MPEXL		2	/* MPE XL OS		*/
+#define OS_ID_OSF		3	/* OSF OS		*/
+#define OS_ID_HPRT		4	/* HP-RT OS		*/
+#define OS_ID_NOVEL		5	/* NOVELL OS		*/
+#define OS_ID_LINUX		6	/* Linux		*/
+
+
+/* constants for PDC_CHASSIS */
+#define OSTAT_OFF		0
+#define OSTAT_FLT		1 
+#define OSTAT_TEST		2
+#define OSTAT_INIT		3
+#define OSTAT_SHUT		4
+#define OSTAT_WARN		5
+#define OSTAT_RUN		6
+#define OSTAT_ON		7
+
+/* Page Zero constant offsets used by the HPMC handler */
+#define BOOT_CONSOLE_HPA_OFFSET  0x3c0
+#define BOOT_CONSOLE_SPA_OFFSET  0x3c4
+#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
+
+/* size of the pdc_result buffer for firmware.c */
+#define NUM_PDC_RESULT	32
+
+#if !defined(__ASSEMBLY__)
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+
+extern int pdc_type;
+
+/* Values for pdc_type */
+#define PDC_TYPE_ILLEGAL	-1
+#define PDC_TYPE_PAT		 0 /* 64-bit PAT-PDC */
+#define PDC_TYPE_SYSTEM_MAP	 1 /* 32-bit, but supports PDC_SYSTEM_MAP */
+#define PDC_TYPE_SNAKE		 2 /* Doesn't support SYSTEM_MAP */
+
+struct pdc_chassis_info {       /* for PDC_CHASSIS_INFO */
+	unsigned long actcnt;   /* actual number of bytes returned */
+	unsigned long maxcnt;   /* maximum number of bytes that could be returned */
+};
+
+struct pdc_coproc_cfg {         /* for PDC_COPROC_CFG */
+        unsigned long ccr_functional;
+        unsigned long ccr_present;
+        unsigned long revision;
+        unsigned long model;
+};
+
+struct pdc_model {		/* for PDC_MODEL */
+	unsigned long hversion;
+	unsigned long sversion;
+	unsigned long hw_id;
+	unsigned long boot_id;
+	unsigned long sw_id;
+	unsigned long sw_cap;
+	unsigned long arch_rev;
+	unsigned long pot_key;
+	unsigned long curr_key;
+};
+
+struct pdc_cache_cf {		/* for PDC_CACHE  (I/D-caches) */
+    unsigned long
+#ifdef CONFIG_64BIT
+		cc_padW:32,
+#endif
+		cc_alias: 4,	/* alias boundaries for virtual addresses   */
+		cc_block: 4,	/* to determine most efficient stride */
+		cc_line	: 3,	/* maximum amount written back as a result of store (multiple of 16 bytes) */
+		cc_shift: 2,	/* how much to shift cc_block left */
+		cc_wt	: 1,	/* 0 = WT-Dcache, 1 = WB-Dcache */
+		cc_sh	: 2,	/* 0 = separate I/D-cache, else shared I/D-cache */
+		cc_cst  : 3,	/* 0 = incoherent D-cache, 1=coherent D-cache */
+		cc_pad1 : 10,	/* reserved */
+		cc_hv   : 3;	/* hversion dependent */
+};
+
+struct pdc_tlb_cf {		/* for PDC_CACHE (I/D-TLB's) */
+    unsigned long tc_pad0:12,	/* reserved */
+#ifdef CONFIG_64BIT
+		tc_padW:32,
+#endif
+		tc_sh	: 2,	/* 0 = separate I/D-TLB, else shared I/D-TLB */
+		tc_hv   : 1,	/* HV */
+		tc_page : 1,	/* 0 = 2K page-size-machine, 1 = 4k page size */
+		tc_cst  : 3,	/* 0 = incoherent operations, else coherent operations */
+		tc_aid  : 5,	/* ITLB: width of access ids of processor (encoded!) */
+		tc_pad1 : 8;	/* ITLB: width of space-registers (encoded) */
+};
+
+struct pdc_cache_info {		/* main-PDC_CACHE-structure (caches & TLB's) */
+	/* I-cache */
+	unsigned long	ic_size;	/* size in bytes */
+	struct pdc_cache_cf ic_conf;	/* configuration */
+	unsigned long	ic_base;	/* base-addr */
+	unsigned long	ic_stride;
+	unsigned long	ic_count;
+	unsigned long	ic_loop;
+	/* D-cache */
+	unsigned long	dc_size;	/* size in bytes */
+	struct pdc_cache_cf dc_conf;	/* configuration */
+	unsigned long	dc_base;	/* base-addr */
+	unsigned long	dc_stride;
+	unsigned long	dc_count;
+	unsigned long	dc_loop;
+	/* Instruction-TLB */
+	unsigned long	it_size;	/* number of entries in I-TLB */
+	struct pdc_tlb_cf it_conf;	/* I-TLB-configuration */
+	unsigned long	it_sp_base;
+	unsigned long	it_sp_stride;
+	unsigned long	it_sp_count;
+	unsigned long	it_off_base;
+	unsigned long	it_off_stride;
+	unsigned long	it_off_count;
+	unsigned long	it_loop;
+	/* data-TLB */
+	unsigned long	dt_size;	/* number of entries in D-TLB */
+	struct pdc_tlb_cf dt_conf;	/* D-TLB-configuration */
+	unsigned long	dt_sp_base;
+	unsigned long	dt_sp_stride;
+	unsigned long	dt_sp_count;
+	unsigned long	dt_off_base;
+	unsigned long	dt_off_stride;
+	unsigned long	dt_off_count;
+	unsigned long	dt_loop;
+};
+
+#if 0
+/* If you start using the next struct, you'll have to adjust it to
+ * work with 64-bit firmware I think -PB
+ */
+struct pdc_iodc {     /* PDC_IODC */
+	unsigned char   hversion_model;
+	unsigned char 	hversion;
+	unsigned char 	spa;
+	unsigned char 	type;
+	unsigned int	sversion_rev:4;
+	unsigned int	sversion_model:19;
+	unsigned int	sversion_opt:8;
+	unsigned char	rev;
+	unsigned char	dep;
+	unsigned char	features;
+	unsigned char	pad1;
+	unsigned int	checksum:16;
+	unsigned int	length:16;
+	unsigned int    pad[15];
+} __attribute__((aligned(8))) ;
+#endif
+
+#ifndef CONFIG_PA20
+/* no BLTBs in pa2.0 processors */
+struct pdc_btlb_info_range {
+	__u8 res00;
+	__u8 num_i;
+	__u8 num_d;
+	__u8 num_comb;
+};
+
+struct pdc_btlb_info {	/* PDC_BLOCK_TLB, return of PDC_BTLB_INFO */
+	unsigned int min_size;	/* minimum size of BTLB in pages */
+	unsigned int max_size;	/* maximum size of BTLB in pages */
+	struct pdc_btlb_info_range fixed_range_info;
+	struct pdc_btlb_info_range variable_range_info;
+};
+
+#endif /* !CONFIG_PA20 */
+
+#ifdef CONFIG_64BIT
+struct pdc_memory_table_raddr { /* PDC_MEM/PDC_MEM_TABLE (return info) */
+	unsigned long entries_returned;
+	unsigned long entries_total;
+};
+
+struct pdc_memory_table {       /* PDC_MEM/PDC_MEM_TABLE (arguments) */
+	unsigned long paddr;
+	unsigned int  pages;
+	unsigned int  reserved;
+};
+#endif /* CONFIG_64BIT */
+
+struct pdc_system_map_mod_info { /* PDC_SYSTEM_MAP/FIND_MODULE */
+	unsigned long mod_addr;
+	unsigned long mod_pgs;
+	unsigned long add_addrs;
+};
+
+struct pdc_system_map_addr_info { /* PDC_SYSTEM_MAP/FIND_ADDRESS */
+	unsigned long mod_addr;
+	unsigned long mod_pgs;
+};
+
+struct pdc_initiator { /* PDC_INITIATOR */
+	int host_id;
+	int factor;
+	int width;
+	int mode;
+};
+
+struct hardware_path {
+	char  flags;	/* see bit definitions below */
+	char  bc[6];	/* Bus Converter routing info to a specific */
+			/* I/O adaptor (< 0 means none, > 63 resvd) */
+	char  mod;	/* fixed field of specified module */
+};
+
+/*
+ * Device path specifications used by PDC.
+ */
+struct pdc_module_path {
+	struct hardware_path path;
+	unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
+};
+
+#ifndef CONFIG_PA20
+/* Only used on some pre-PA2.0 boxes */
+struct pdc_memory_map {		/* PDC_MEMORY_MAP */
+	unsigned long hpa;	/* mod's register set address */
+	unsigned long more_pgs;	/* number of additional I/O pgs */
+};
+#endif
+
+struct pdc_tod {
+	unsigned long tod_sec; 
+	unsigned long tod_usec;
+};
+
+/* architected results from PDC_PIM/transfer hpmc on a PA1.1 machine */
+
+struct pdc_hpmc_pim_11 { /* PDC_PIM */
+	__u32 gr[32];
+	__u32 cr[32];
+	__u32 sr[8];
+	__u32 iasq_back;
+	__u32 iaoq_back;
+	__u32 check_type;
+	__u32 cpu_state;
+	__u32 rsvd1;
+	__u32 cache_check;
+	__u32 tlb_check;
+	__u32 bus_check;
+	__u32 assists_check;
+	__u32 rsvd2;
+	__u32 assist_state;
+	__u32 responder_addr;
+	__u32 requestor_addr;
+	__u32 path_info;
+	__u64 fr[32];
+};
+
+/*
+ * architected results from PDC_PIM/transfer hpmc on a PA2.0 machine
+ *
+ * Note that PDC_PIM doesn't care whether or not wide mode was enabled
+ * so the results are different on  PA1.1 vs. PA2.0 when in narrow mode.
+ *
+ * Note also that there are unarchitected results available, which
+ * are hversion dependent. Do a "ser pim 0 hpmc" after rebooting, since
+ * the firmware is probably the best way of printing hversion dependent
+ * data.
+ */
+
+struct pdc_hpmc_pim_20 { /* PDC_PIM */
+	__u64 gr[32];
+	__u64 cr[32];
+	__u64 sr[8];
+	__u64 iasq_back;
+	__u64 iaoq_back;
+	__u32 check_type;
+	__u32 cpu_state;
+	__u32 cache_check;
+	__u32 tlb_check;
+	__u32 bus_check;
+	__u32 assists_check;
+	__u32 assist_state;
+	__u32 path_info;
+	__u64 responder_addr;
+	__u64 requestor_addr;
+	__u64 fr[32];
+};
+
+void pdc_console_init(void);	/* in pdc_console.c */
+void pdc_console_restart(void);
+
+void setup_pdc(void);		/* in inventory.c */
+
+/* wrapper-functions from pdc.c */
+
+int pdc_add_valid(unsigned long address);
+int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len);
+int pdc_chassis_disp(unsigned long disp);
+int pdc_chassis_warn(unsigned long *warn);
+int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info);
+int pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info);
+int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
+		  void *iodc_data, unsigned int iodc_data_size);
+int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
+			     struct pdc_module_path *mod_path, long mod_index);
+int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info,
+			      long mod_index, long addr_index);
+int pdc_model_info(struct pdc_model *model);
+int pdc_model_sysmodel(char *name);
+int pdc_model_cpuid(unsigned long *cpu_id);
+int pdc_model_versions(unsigned long *versions, int id);
+int pdc_model_capabilities(unsigned long *capabilities);
+int pdc_cache_info(struct pdc_cache_info *cache);
+int pdc_spaceid_bits(unsigned long *space_bits);
+#ifndef CONFIG_PA20
+int pdc_btlb_info(struct pdc_btlb_info *btlb);
+int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path);
+#endif /* !CONFIG_PA20 */
+int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa);
+
+int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count);
+int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count);
+int pdc_stable_get_size(unsigned long *size);
+int pdc_stable_verify_contents(void);
+int pdc_stable_initialize(void);
+
+int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa);
+int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl);
+
+int pdc_get_initiator(struct hardware_path *, struct pdc_initiator *);
+int pdc_tod_read(struct pdc_tod *tod);
+int pdc_tod_set(unsigned long sec, unsigned long usec);
+
+#ifdef CONFIG_64BIT
+int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
+		struct pdc_memory_table *tbl, unsigned long entries);
+#endif
+
+void set_firmware_width(void);
+void set_firmware_width_unlocked(void);
+int pdc_do_firm_test_reset(unsigned long ftc_bitmap);
+int pdc_do_reset(void);
+int pdc_soft_power_info(unsigned long *power_reg);
+int pdc_soft_power_button(int sw_control);
+void pdc_io_reset(void);
+void pdc_io_reset_devices(void);
+int pdc_iodc_getc(void);
+int pdc_iodc_print(const unsigned char *str, unsigned count);
+
+void pdc_emergency_unlock(void);
+int pdc_sti_call(unsigned long func, unsigned long flags,
+                 unsigned long inptr, unsigned long outputr,
+                 unsigned long glob_cfg);
+
+static inline char * os_id_to_string(u16 os_id) {
+	switch(os_id) {
+	case OS_ID_NONE:	return "No OS";
+	case OS_ID_HPUX:	return "HP-UX";
+	case OS_ID_MPEXL:	return "MPE-iX";
+	case OS_ID_OSF:		return "OSF";
+	case OS_ID_HPRT:	return "HP-RT";
+	case OS_ID_NOVEL:	return "Novell Netware";
+	case OS_ID_LINUX:	return "Linux";
+	default:	return "Unknown";
+	}
+}
+
+#endif /* __KERNEL__ */
+
+#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
+
+/* DEFINITION OF THE ZERO-PAGE (PAG0) */
+/* based on work by Jason Eckhardt (jason@equator.com) */
+
+/* flags of the device_path */
+#define	PF_AUTOBOOT	0x80
+#define	PF_AUTOSEARCH	0x40
+#define	PF_TIMER	0x0F
+
+struct device_path {		/* page 1-69 */
+	unsigned char flags;	/* flags see above! */
+	unsigned char bc[6];	/* bus converter routing info */
+	unsigned char mod;
+	unsigned int  layers[6];/* device-specific layer-info */
+} __attribute__((aligned(8))) ;
+
+struct pz_device {
+	struct	device_path dp;	/* see above */
+	/* struct	iomod *hpa; */
+	unsigned int hpa;	/* HPA base address */
+	/* char	*spa; */
+	unsigned int spa;	/* SPA base address */
+	/* int	(*iodc_io)(struct iomod*, ...); */
+	unsigned int iodc_io;	/* device entry point */
+	short	pad;		/* reserved */
+	unsigned short cl_class;/* see below */
+} __attribute__((aligned(8))) ;
+
+struct zeropage {
+	/* [0x000] initialize vectors (VEC) */
+	unsigned int	vec_special;		/* must be zero */
+	/* int	(*vec_pow_fail)(void);*/
+	unsigned int	vec_pow_fail; /* power failure handler */
+	/* int	(*vec_toc)(void); */
+	unsigned int	vec_toc;
+	unsigned int	vec_toclen;
+	/* int	(*vec_rendz)(void); */
+	unsigned int vec_rendz;
+	int	vec_pow_fail_flen;
+	int	vec_pad[10];		
+	
+	/* [0x040] reserved processor dependent */
+	int	pad0[112];
+
+	/* [0x200] reserved */
+	int	pad1[84];
+
+	/* [0x350] memory configuration (MC) */
+	int	memc_cont;		/* contiguous mem size (bytes) */
+	int	memc_phsize;		/* physical memory size */
+	int	memc_adsize;		/* additional mem size, bytes of SPA space used by PDC */
+	unsigned int mem_pdc_hi;	/* used for 64-bit */
+
+	/* [0x360] various parameters for the boot-CPU */
+	/* unsigned int *mem_booterr[8]; */
+	unsigned int mem_booterr[8];	/* ptr to boot errors */
+	unsigned int mem_free;		/* first location, where OS can be loaded */
+	/* struct iomod *mem_hpa; */
+	unsigned int mem_hpa;		/* HPA of the boot-CPU */
+	/* int (*mem_pdc)(int, ...); */
+	unsigned int mem_pdc;		/* PDC entry point */
+	unsigned int mem_10msec;	/* number of clock ticks in 10msec */
+
+	/* [0x390] initial memory module (IMM) */
+	/* struct iomod *imm_hpa; */
+	unsigned int imm_hpa;		/* HPA of the IMM */
+	int	imm_soft_boot;		/* 0 = was hard boot, 1 = was soft boot */
+	unsigned int	imm_spa_size;		/* SPA size of the IMM in bytes */
+	unsigned int	imm_max_mem;		/* bytes of mem in IMM */
+
+	/* [0x3A0] boot console, display device and keyboard */
+	struct pz_device mem_cons;	/* description of console device */
+	struct pz_device mem_boot;	/* description of boot device */
+	struct pz_device mem_kbd;	/* description of keyboard device */
+
+	/* [0x430] reserved */
+	int	pad430[116];
+
+	/* [0x600] processor dependent */
+	__u32	pad600[1];
+	__u32	proc_sti;		/* pointer to STI ROM */
+	__u32	pad608[126];
+};
+
+#endif /* !defined(__ASSEMBLY__) */
+
+#endif /* _PARISC_PDC_H */
diff --git a/arch/parisc/include/asm/pdc_chassis.h b/arch/parisc/include/asm/pdc_chassis.h
new file mode 100644
index 0000000..a609273
--- /dev/null
+++ b/arch/parisc/include/asm/pdc_chassis.h
@@ -0,0 +1,381 @@
+/*
+ *	include/asm-parisc/pdc_chassis.h
+ *
+ *	Copyright (C) 2002 Laurent Canet <canetl@esiee.fr>
+ *	Copyright (C) 2002 Thibaut Varene <varenet@parisc-linux.org>
+ *
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License, version 2, as
+ *      published by the Free Software Foundation.
+ *      
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *      
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *      TODO:	- handle processor number on SMP systems (Reporting Entity ID)
+ *      	- handle message ID
+ *      	- handle timestamps
+ */
+ 
+
+#ifndef _PARISC_PDC_CHASSIS_H
+#define _PARISC_PDC_CHASSIS_H
+
+/*
+ * ----------
+ * Prototypes
+ * ----------
+ */
+
+int pdc_chassis_send_status(int message);
+void parisc_pdc_chassis_init(void);
+
+
+/*
+ * -----------------
+ * Direct call names
+ * -----------------
+ * They setup everything for you, the Log message and the corresponding LED state
+ */
+
+#define PDC_CHASSIS_DIRECT_BSTART	0
+#define PDC_CHASSIS_DIRECT_BCOMPLETE	1
+#define PDC_CHASSIS_DIRECT_SHUTDOWN	2
+#define PDC_CHASSIS_DIRECT_PANIC	3
+#define PDC_CHASSIS_DIRECT_HPMC		4
+#define PDC_CHASSIS_DIRECT_LPMC		5
+#define PDC_CHASSIS_DIRECT_DUMP		6	/* not yet implemented */
+#define PDC_CHASSIS_DIRECT_OOPS		7	/* not yet implemented */
+
+
+/*
+ * ------------
+ * LEDs control
+ * ------------
+ * Set the three LEDs -- Run, Attn, and Fault.
+ */
+
+/* Old PDC LED control */
+#define PDC_CHASSIS_DISP_DATA(v)	((unsigned long)(v) << 17)
+
+/* 
+ * Available PDC PAT LED states
+ */
+
+#define PDC_CHASSIS_LED_RUN_OFF		(0ULL << 4)
+#define PDC_CHASSIS_LED_RUN_FLASH	(1ULL << 4)
+#define PDC_CHASSIS_LED_RUN_ON		(2ULL << 4)
+#define PDC_CHASSIS_LED_RUN_NC		(3ULL << 4)
+#define PDC_CHASSIS_LED_ATTN_OFF	(0ULL << 6)
+#define PDC_CHASSIS_LED_ATTN_FLASH	(1ULL << 6)
+#define PDC_CHASSIS_LED_ATTN_NC		(3ULL << 6)	/* ATTN ON is invalid */
+#define PDC_CHASSIS_LED_FAULT_OFF	(0ULL << 8)
+#define PDC_CHASSIS_LED_FAULT_FLASH	(1ULL << 8)
+#define PDC_CHASSIS_LED_FAULT_ON	(2ULL << 8)
+#define PDC_CHASSIS_LED_FAULT_NC	(3ULL << 8)
+#define PDC_CHASSIS_LED_VALID		(1ULL << 10)
+
+/* 
+ * Valid PDC PAT LED states combinations
+ */
+
+/* System running normally */
+#define PDC_CHASSIS_LSTATE_RUN_NORMAL	(PDC_CHASSIS_LED_RUN_ON		| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* System crashed and rebooted itself successfully */
+#define PDC_CHASSIS_LSTATE_RUN_CRASHREC	(PDC_CHASSIS_LED_RUN_ON		| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_FLASH	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* There was a system interruption that did not take the system down */
+#define PDC_CHASSIS_LSTATE_RUN_SYSINT	(PDC_CHASSIS_LED_RUN_ON		| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* System running and unexpected reboot or non-critical error detected */
+#define PDC_CHASSIS_LSTATE_RUN_NCRIT	(PDC_CHASSIS_LED_RUN_ON		| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_FLASH	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Executing non-OS code */
+#define PDC_CHASSIS_LSTATE_NONOS	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Boot failed - Executing non-OS code */
+#define PDC_CHASSIS_LSTATE_NONOS_BFAIL	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_ON	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Unexpected reboot occurred - Executing non-OS code */
+#define PDC_CHASSIS_LSTATE_NONOS_UNEXP	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_FLASH	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Executing non-OS code - Non-critical error detected */
+#define PDC_CHASSIS_LSTATE_NONOS_NCRIT	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Boot failed - Executing non-OS code - Non-critical error detected */
+#define PDC_CHASSIS_LSTATE_BFAIL_NCRIT	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_ON	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Unexpected reboot/recovering - Executing non-OS code - Non-critical error detected */
+#define PDC_CHASSIS_LSTATE_UNEXP_NCRIT	(PDC_CHASSIS_LED_RUN_FLASH	| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_FLASH	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Cannot execute PDC */
+#define PDC_CHASSIS_LSTATE_CANNOT_PDC	(PDC_CHASSIS_LED_RUN_OFF	| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Boot failed - OS not up - PDC has detected a failure that prevents boot */
+#define PDC_CHASSIS_LSTATE_FATAL_BFAIL	(PDC_CHASSIS_LED_RUN_OFF	| \
+					 PDC_CHASSIS_LED_ATTN_OFF	| \
+					 PDC_CHASSIS_LED_FAULT_ON	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* No code running - Non-critical error detected (double fault situation) */
+#define PDC_CHASSIS_LSTATE_NOCODE_NCRIT	(PDC_CHASSIS_LED_RUN_OFF	| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_OFF	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* Boot failed - OS not up - Fatal failure detected - Non-critical error detected */
+#define PDC_CHASSIS_LSTATE_FATAL_NCRIT	(PDC_CHASSIS_LED_RUN_OFF	| \
+					 PDC_CHASSIS_LED_ATTN_FLASH	| \
+					 PDC_CHASSIS_LED_FAULT_ON	| \
+					 PDC_CHASSIS_LED_VALID		)
+/* All other states are invalid */
+
+
+/*
+ * --------------
+ * PDC Log events
+ * --------------
+ * Here follows bits needed to fill up the log event sent to PDC_CHASSIS
+ * The log message contains: Alert level, Source, Source detail,
+ * Source ID, Problem detail, Caller activity, Activity status, 
+ * Caller subactivity, Reporting entity type, Reporting entity ID,
+ * Data type, Unique message ID and EOM. 
+ */
+
+/* Alert level */
+#define PDC_CHASSIS_ALERT_FORWARD	(0ULL << 36)	/* no failure detected */
+#define PDC_CHASSIS_ALERT_SERPROC	(1ULL << 36)	/* service proc - no failure */
+#define PDC_CHASSIS_ALERT_NURGENT	(2ULL << 36)	/* non-urgent operator attn */
+#define PDC_CHASSIS_ALERT_BLOCKED	(3ULL << 36)	/* system blocked */
+#define PDC_CHASSIS_ALERT_CONF_CHG	(4ULL << 36)	/* unexpected configuration change */
+#define PDC_CHASSIS_ALERT_ENV_PB	(5ULL << 36)	/* boot possible, environmental pb */
+#define PDC_CHASSIS_ALERT_PENDING	(6ULL << 36)	/* boot possible, pending failure */
+#define PDC_CHASSIS_ALERT_PERF_IMP	(8ULL << 36)	/* boot possible, performance impaired */
+#define PDC_CHASSIS_ALERT_FUNC_IMP	(10ULL << 36)	/* boot possible, functionality impaired */
+#define PDC_CHASSIS_ALERT_SOFT_FAIL	(12ULL << 36)	/* software failure */
+#define PDC_CHASSIS_ALERT_HANG		(13ULL << 36)	/* system hang */
+#define PDC_CHASSIS_ALERT_ENV_FATAL	(14ULL << 36)	/* fatal power or environmental pb */
+#define PDC_CHASSIS_ALERT_HW_FATAL	(15ULL << 36)	/* fatal hardware problem */
+
+/* Source */
+#define PDC_CHASSIS_SRC_NONE		(0ULL << 28)	/* unknown, no source stated */
+#define PDC_CHASSIS_SRC_PROC		(1ULL << 28)	/* processor */
+/* For later use ? */
+#define PDC_CHASSIS_SRC_PROC_CACHE	(2ULL << 28)	/* processor cache*/
+#define PDC_CHASSIS_SRC_PDH		(3ULL << 28)	/* processor dependent hardware */
+#define PDC_CHASSIS_SRC_PWR		(4ULL << 28)	/* power */
+#define PDC_CHASSIS_SRC_FAB		(5ULL << 28)	/* fabric connector */
+#define PDC_CHASSIS_SRC_PLATi		(6ULL << 28)	/* platform */
+#define PDC_CHASSIS_SRC_MEM		(7ULL << 28)	/* memory */
+#define PDC_CHASSIS_SRC_IO		(8ULL << 28)	/* I/O */
+#define PDC_CHASSIS_SRC_CELL		(9ULL << 28)	/* cell */
+#define PDC_CHASSIS_SRC_PD		(10ULL << 28)	/* protected domain */
+
+/* Source detail field */
+#define PDC_CHASSIS_SRC_D_PROC		(1ULL << 24)	/* processor general */
+
+/* Source ID - platform dependent */
+#define PDC_CHASSIS_SRC_ID_UNSPEC	(0ULL << 16)
+
+/* Problem detail - problem source dependent */
+#define PDC_CHASSIS_PB_D_PROC_NONE	(0ULL << 32)	/* no problem detail */
+#define PDC_CHASSIS_PB_D_PROC_TIMEOUT	(4ULL << 32)	/* timeout */
+
+/* Caller activity */
+#define PDC_CHASSIS_CALL_ACT_HPUX_BL	(7ULL << 12)	/* Boot Loader */
+#define PDC_CHASSIS_CALL_ACT_HPUX_PD	(8ULL << 12)	/* SAL_PD activities */
+#define PDC_CHASSIS_CALL_ACT_HPUX_EVENT	(9ULL << 12)	/* SAL_EVENTS activities */
+#define PDC_CHASSIS_CALL_ACT_HPUX_IO	(10ULL << 12)	/* SAL_IO activities */
+#define PDC_CHASSIS_CALL_ACT_HPUX_PANIC	(11ULL << 12)	/* System panic */
+#define PDC_CHASSIS_CALL_ACT_HPUX_INIT	(12ULL << 12)	/* System initialization */
+#define PDC_CHASSIS_CALL_ACT_HPUX_SHUT	(13ULL << 12)	/* System shutdown */
+#define PDC_CHASSIS_CALL_ACT_HPUX_WARN	(14ULL << 12)	/* System warning */
+#define PDC_CHASSIS_CALL_ACT_HPUX_DU	(15ULL << 12)	/* Display_Activity() update */
+
+/* Activity status - implementation dependent */
+#define PDC_CHASSIS_ACT_STATUS_UNSPEC	(0ULL << 0)
+
+/* Caller subactivity - implementation dependent */
+/* FIXME: other subactivities ? */
+#define PDC_CHASSIS_CALL_SACT_UNSPEC	(0ULL << 4)	/* implementation dependent */
+
+/* Reporting entity type */
+#define PDC_CHASSIS_RET_GENERICOS	(12ULL << 52)	/* generic OSes */
+#define PDC_CHASSIS_RET_IA64_NT		(13ULL << 52)	/* IA-64 NT */
+#define PDC_CHASSIS_RET_HPUX		(14ULL << 52)	/* HP-UX */
+#define PDC_CHASSIS_RET_DIAG		(15ULL << 52)	/* offline diagnostics & utilities */
+
+/* Reporting entity ID */
+#define PDC_CHASSIS_REID_UNSPEC		(0ULL << 44)
+
+/* Data type */
+#define PDC_CHASSIS_DT_NONE		(0ULL << 59)	/* data field unused */
+/* For later use ? Do we need these ? */
+#define PDC_CHASSIS_DT_PHYS_ADDR	(1ULL << 59)	/* physical address */
+#define PDC_CHASSIS_DT_DATA_EXPECT	(2ULL << 59)	/* expected data */
+#define PDC_CHASSIS_DT_ACTUAL		(3ULL << 59)	/* actual data */
+#define PDC_CHASSIS_DT_PHYS_LOC		(4ULL << 59)	/* physical location */
+#define PDC_CHASSIS_DT_PHYS_LOC_EXT	(5ULL << 59)	/* physical location extension */
+#define PDC_CHASSIS_DT_TAG		(6ULL << 59)	/* tag */
+#define PDC_CHASSIS_DT_SYNDROME		(7ULL << 59)	/* syndrome */
+#define PDC_CHASSIS_DT_CODE_ADDR	(8ULL << 59)	/* code address */
+#define PDC_CHASSIS_DT_ASCII_MSG	(9ULL << 59)	/* ascii message */
+#define PDC_CHASSIS_DT_POST		(10ULL << 59)	/* POST code */
+#define PDC_CHASSIS_DT_TIMESTAMP	(11ULL << 59)	/* timestamp */
+#define PDC_CHASSIS_DT_DEV_STAT		(12ULL << 59)	/* device status */
+#define PDC_CHASSIS_DT_DEV_TYPE		(13ULL << 59)	/* device type */
+#define PDC_CHASSIS_DT_PB_DET		(14ULL << 59)	/* problem detail */
+#define PDC_CHASSIS_DT_ACT_LEV		(15ULL << 59)	/* activity level/timeout */
+#define PDC_CHASSIS_DT_SER_NUM		(16ULL << 59)	/* serial number */
+#define PDC_CHASSIS_DT_REV_NUM		(17ULL << 59)	/* revision number */
+#define PDC_CHASSIS_DT_INTERRUPT	(18ULL << 59)	/* interruption information */
+#define PDC_CHASSIS_DT_TEST_NUM		(19ULL << 59)	/* test number */
+#define PDC_CHASSIS_DT_STATE_CHG	(20ULL << 59)	/* major changes in system state */
+#define PDC_CHASSIS_DT_PROC_DEALLOC	(21ULL << 59)	/* processor deallocate */
+#define PDC_CHASSIS_DT_RESET		(30ULL << 59)	/* reset type and cause */
+#define PDC_CHASSIS_DT_PA_LEGACY	(31ULL << 59)	/* legacy PA hex chassis code */
+
+/* System states - part of major changes in system state data field */
+#define PDC_CHASSIS_SYSTATE_BSTART	(0ULL << 0)	/* boot start */
+#define PDC_CHASSIS_SYSTATE_BCOMP	(1ULL << 0)	/* boot complete */
+#define PDC_CHASSIS_SYSTATE_CHANGE	(2ULL << 0)	/* major change */
+#define PDC_CHASSIS_SYSTATE_LED		(3ULL << 0)	/* LED change */
+#define PDC_CHASSIS_SYSTATE_PANIC	(9ULL << 0)	/* OS Panic */
+#define PDC_CHASSIS_SYSTATE_DUMP	(10ULL << 0)	/* memory dump */
+#define PDC_CHASSIS_SYSTATE_HPMC	(11ULL << 0)	/* processing HPMC */
+#define PDC_CHASSIS_SYSTATE_HALT	(15ULL << 0)	/* system halted */
+
+/* Message ID */
+#define PDC_CHASSIS_MSG_ID		(0ULL << 40)	/* we do not handle msg IDs atm */
+
+/* EOM - separates log entries */
+#define PDC_CHASSIS_EOM_CLEAR		(0ULL << 43)
+#define PDC_CHASSIS_EOM_SET		(1ULL << 43)
+
+/*
+ * Preformated well known messages
+ */
+
+/* Boot started */
+#define PDC_CHASSIS_PMSG_BSTART		(PDC_CHASSIS_ALERT_SERPROC	| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_INIT	| \
+					 PDC_CHASSIS_ACT_STATUS_UNSPEC	| \
+					 PDC_CHASSIS_CALL_SACT_UNSPEC	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_REID_UNSPEC	| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_BSTART	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+/* Boot complete */
+#define PDC_CHASSIS_PMSG_BCOMPLETE	(PDC_CHASSIS_ALERT_SERPROC	| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_INIT	| \
+					 PDC_CHASSIS_ACT_STATUS_UNSPEC	| \
+					 PDC_CHASSIS_CALL_SACT_UNSPEC	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_REID_UNSPEC	| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_BCOMP	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+/* Shutdown */
+#define PDC_CHASSIS_PMSG_SHUTDOWN	(PDC_CHASSIS_ALERT_SERPROC	| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_SHUT	| \
+					 PDC_CHASSIS_ACT_STATUS_UNSPEC	| \
+					 PDC_CHASSIS_CALL_SACT_UNSPEC	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_REID_UNSPEC	| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_HALT	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+/* Panic */
+#define PDC_CHASSIS_PMSG_PANIC		(PDC_CHASSIS_ALERT_SOFT_FAIL	| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_PANIC| \
+					 PDC_CHASSIS_ACT_STATUS_UNSPEC	| \
+					 PDC_CHASSIS_CALL_SACT_UNSPEC	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_REID_UNSPEC	| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_PANIC	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+// FIXME: extrapolated data
+/* HPMC */
+#define PDC_CHASSIS_PMSG_HPMC		(PDC_CHASSIS_ALERT_CONF_CHG /*?*/	| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_WARN	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_HPMC	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+/* LPMC */
+#define PDC_CHASSIS_PMSG_LPMC		(PDC_CHASSIS_ALERT_BLOCKED /*?*/| \
+					 PDC_CHASSIS_SRC_PROC		| \
+					 PDC_CHASSIS_SRC_D_PROC		| \
+					 PDC_CHASSIS_SRC_ID_UNSPEC	| \
+					 PDC_CHASSIS_PB_D_PROC_NONE	| \
+					 PDC_CHASSIS_CALL_ACT_HPUX_WARN	| \
+					 PDC_CHASSIS_ACT_STATUS_UNSPEC	| \
+					 PDC_CHASSIS_CALL_SACT_UNSPEC	| \
+					 PDC_CHASSIS_RET_HPUX		| \
+					 PDC_CHASSIS_REID_UNSPEC	| \
+					 PDC_CHASSIS_DT_STATE_CHG	| \
+					 PDC_CHASSIS_SYSTATE_CHANGE	| \
+					 PDC_CHASSIS_MSG_ID		| \
+					 PDC_CHASSIS_EOM_SET		)
+
+#endif /* _PARISC_PDC_CHASSIS_H */
+/* vim: set ts=8 */
diff --git a/arch/parisc/include/asm/pdcpat.h b/arch/parisc/include/asm/pdcpat.h
new file mode 100644
index 0000000..47539f1
--- /dev/null
+++ b/arch/parisc/include/asm/pdcpat.h
@@ -0,0 +1,308 @@
+#ifndef __PARISC_PATPDC_H
+#define __PARISC_PATPDC_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2000 (c) Hewlett Packard (Paul Bame <bame()spam.parisc-linux.org>)
+ * Copyright 2000,2004 (c) Grant Grundler <grundler()nahspam.parisc-linux.org>
+ */
+
+
+#define PDC_PAT_CELL           	64L   /* Interface for gaining and 
+                                         * manipulatin g cell state within PD */
+#define PDC_PAT_CELL_GET_NUMBER    0L   /* Return Cell number */
+#define PDC_PAT_CELL_GET_INFO      1L   /* Returns info about Cell */
+#define PDC_PAT_CELL_MODULE        2L   /* Returns info about Module */
+#define PDC_PAT_CELL_SET_ATTENTION 9L   /* Set Cell Attention indicator */
+#define PDC_PAT_CELL_NUMBER_TO_LOC 10L   /* Cell Number -> Location */
+#define PDC_PAT_CELL_WALK_FABRIC   11L   /* Walk the Fabric */
+#define PDC_PAT_CELL_GET_RDT_SIZE  12L   /* Return Route Distance Table Sizes */
+#define PDC_PAT_CELL_GET_RDT       13L   /* Return Route Distance Tables */
+#define PDC_PAT_CELL_GET_LOCAL_PDH_SZ 14L /* Read Local PDH Buffer Size */
+#define PDC_PAT_CELL_SET_LOCAL_PDH    15L  /* Write Local PDH Buffer */
+#define PDC_PAT_CELL_GET_REMOTE_PDH_SZ 16L /* Return Remote PDH Buffer Size */
+#define PDC_PAT_CELL_GET_REMOTE_PDH 17L /* Read Remote PDH Buffer */
+#define PDC_PAT_CELL_GET_DBG_INFO   128L  /* Return DBG Buffer Info */
+#define PDC_PAT_CELL_CHANGE_ALIAS   129L  /* Change Non-Equivalent Alias Chacking */
+
+
+/*
+** Arg to PDC_PAT_CELL_MODULE memaddr[4]
+**
+** Addresses on the Merced Bus != all Runway Bus addresses.
+** This is intended for programming SBA/LBA chips range registers.
+*/
+#define IO_VIEW      0UL
+#define PA_VIEW      1UL
+
+/* PDC_PAT_CELL_MODULE entity type values */
+#define	PAT_ENTITY_CA	0	/* central agent */
+#define	PAT_ENTITY_PROC	1	/* processor */
+#define	PAT_ENTITY_MEM	2	/* memory controller */
+#define	PAT_ENTITY_SBA	3	/* system bus adapter */
+#define	PAT_ENTITY_LBA	4	/* local bus adapter */
+#define	PAT_ENTITY_PBC	5	/* processor bus converter */
+#define	PAT_ENTITY_XBC	6	/* crossbar fabric connect */
+#define	PAT_ENTITY_RC	7	/* fabric interconnect */
+
+/* PDC_PAT_CELL_MODULE address range type values */
+#define PAT_PBNUM           0         /* PCI Bus Number */
+#define PAT_LMMIO           1         /* < 4G MMIO Space */
+#define PAT_GMMIO           2         /* > 4G MMIO Space */
+#define PAT_NPIOP           3         /* Non Postable I/O Port Space */
+#define PAT_PIOP            4         /* Postable I/O Port Space */
+#define PAT_AHPA            5         /* Addional HPA Space */
+#define PAT_UFO             6         /* HPA Space (UFO for Mariposa) */
+#define PAT_GNIP            7         /* GNI Reserved Space */
+
+
+
+/* PDC PAT CHASSIS LOG -- Platform logging & forward progress functions */
+
+#define PDC_PAT_CHASSIS_LOG		65L
+#define PDC_PAT_CHASSIS_WRITE_LOG    	0L /* Write Log Entry */
+#define PDC_PAT_CHASSIS_READ_LOG     	1L /* Read  Log Entry */
+
+
+/* PDC PAT CPU  -- CPU configuration within the protection domain */
+
+#define PDC_PAT_CPU                	67L
+#define PDC_PAT_CPU_INFO            	0L /* Return CPU config info */
+#define PDC_PAT_CPU_DELETE          	1L /* Delete CPU */
+#define PDC_PAT_CPU_ADD             	2L /* Add    CPU */
+#define PDC_PAT_CPU_GET_NUMBER      	3L /* Return CPU Number */
+#define PDC_PAT_CPU_GET_HPA         	4L /* Return CPU HPA */
+#define PDC_PAT_CPU_STOP            	5L /* Stop   CPU */
+#define PDC_PAT_CPU_RENDEZVOUS      	6L /* Rendezvous CPU */
+#define PDC_PAT_CPU_GET_CLOCK_INFO  	7L /* Return CPU Clock info */
+#define PDC_PAT_CPU_GET_RENDEZVOUS_STATE 8L /* Return Rendezvous State */
+#define PDC_PAT_CPU_PLUNGE_FABRIC 	128L /* Plunge Fabric */
+#define PDC_PAT_CPU_UPDATE_CACHE_CLEANSING 129L /* Manipulate Cache 
+                                                 * Cleansing Mode */
+/*  PDC PAT EVENT -- Platform Events */
+
+#define PDC_PAT_EVENT              	68L
+#define PDC_PAT_EVENT_GET_CAPS     	0L /* Get Capabilities */
+#define PDC_PAT_EVENT_SET_MODE     	1L /* Set Notification Mode */
+#define PDC_PAT_EVENT_SCAN         	2L /* Scan Event */
+#define PDC_PAT_EVENT_HANDLE       	3L /* Handle Event */
+#define PDC_PAT_EVENT_GET_NB_CALL  	4L /* Get Non-Blocking call Args */
+
+/*  PDC PAT HPMC -- Cause processor to go into spin loop, and wait
+ *  			for wake up from Monarch Processor.
+ */
+
+#define PDC_PAT_HPMC               70L
+#define PDC_PAT_HPMC_RENDEZ_CPU     0L /* go into spin loop */
+#define PDC_PAT_HPMC_SET_PARAMS     1L /* Allows OS to specify intr which PDC 
+                                        * will use to interrupt OS during
+                                        * machine check rendezvous */
+
+/* parameters for PDC_PAT_HPMC_SET_PARAMS: */
+#define HPMC_SET_PARAMS_INTR 	    1L /* Rendezvous Interrupt */
+#define HPMC_SET_PARAMS_WAKE 	    2L /* Wake up processor */
+
+
+/*  PDC PAT IO  -- On-line services for I/O modules */
+
+#define PDC_PAT_IO                  71L
+#define PDC_PAT_IO_GET_SLOT_STATUS   	5L /* Get Slot Status Info*/
+#define PDC_PAT_IO_GET_LOC_FROM_HARDWARE 6L /* Get Physical Location from */
+                                            /* Hardware Path */
+#define PDC_PAT_IO_GET_HARDWARE_FROM_LOC 7L /* Get Hardware Path from 
+                                             * Physical Location */
+#define PDC_PAT_IO_GET_PCI_CONFIG_FROM_HW 11L /* Get PCI Configuration
+                                               * Address from Hardware Path */
+#define PDC_PAT_IO_GET_HW_FROM_PCI_CONFIG 12L /* Get Hardware Path 
+                                               * from PCI Configuration Address */
+#define PDC_PAT_IO_READ_HOST_BRIDGE_INFO 13L  /* Read Host Bridge State Info */
+#define PDC_PAT_IO_CLEAR_HOST_BRIDGE_INFO 14L /* Clear Host Bridge State Info*/
+#define PDC_PAT_IO_GET_PCI_ROUTING_TABLE_SIZE 15L /* Get PCI INT Routing Table 
+                                                   * Size */
+#define PDC_PAT_IO_GET_PCI_ROUTING_TABLE  16L /* Get PCI INT Routing Table */
+#define PDC_PAT_IO_GET_HINT_TABLE_SIZE 	17L /* Get Hint Table Size */
+#define PDC_PAT_IO_GET_HINT_TABLE   	18L /* Get Hint Table */
+#define PDC_PAT_IO_PCI_CONFIG_READ  	19L /* PCI Config Read */
+#define PDC_PAT_IO_PCI_CONFIG_WRITE 	20L /* PCI Config Write */
+#define PDC_PAT_IO_GET_NUM_IO_SLOTS 	21L /* Get Number of I/O Bay Slots in 
+                                       		  * Cabinet */
+#define PDC_PAT_IO_GET_LOC_IO_SLOTS 	22L /* Get Physical Location of I/O */
+                                   		     /* Bay Slots in Cabinet */
+#define PDC_PAT_IO_BAY_STATUS_INFO  	28L /* Get I/O Bay Slot Status Info */
+#define PDC_PAT_IO_GET_PROC_VIEW        29L /* Get Processor view of IO address */
+#define PDC_PAT_IO_PROG_SBA_DIR_RANGE   30L /* Program directed range */
+
+
+/* PDC PAT MEM  -- Manage memory page deallocation */
+
+#define PDC_PAT_MEM            72L
+#define PDC_PAT_MEM_PD_INFO     	0L /* Return PDT info for PD       */
+#define PDC_PAT_MEM_PD_CLEAR    	1L /* Clear PDT for PD             */
+#define PDC_PAT_MEM_PD_READ     	2L /* Read PDT entries for PD      */
+#define PDC_PAT_MEM_PD_RESET    	3L /* Reset clear bit for PD       */
+#define PDC_PAT_MEM_CELL_INFO   	5L /* Return PDT info For Cell     */
+#define PDC_PAT_MEM_CELL_CLEAR  	6L /* Clear PDT For Cell           */
+#define PDC_PAT_MEM_CELL_READ   	7L /* Read PDT entries For Cell    */
+#define PDC_PAT_MEM_CELL_RESET  	8L /* Reset clear bit For Cell     */
+#define PDC_PAT_MEM_SETGM	  	9L /* Set Golden Memory value      */
+#define PDC_PAT_MEM_ADD_PAGE    	10L /* ADDs a page to the cell      */
+#define PDC_PAT_MEM_ADDRESS     	11L /* Get Physical Location From   */
+                                    		 /* Memory Address               */
+#define PDC_PAT_MEM_GET_TXT_SIZE   	12L /* Get Formatted Text Size   */
+#define PDC_PAT_MEM_GET_PD_TXT     	13L /* Get PD Formatted Text     */
+#define PDC_PAT_MEM_GET_CELL_TXT   	14L /* Get Cell Formatted Text   */
+#define PDC_PAT_MEM_RD_STATE_INFO  	15L /* Read Mem Module State Info*/
+#define PDC_PAT_MEM_CLR_STATE_INFO 	16L /*Clear Mem Module State Info*/
+#define PDC_PAT_MEM_CLEAN_RANGE    	128L /*Clean Mem in specific range*/
+#define PDC_PAT_MEM_GET_TBL_SIZE   	131L /* Get Memory Table Size     */
+#define PDC_PAT_MEM_GET_TBL        	132L /* Get Memory Table          */
+
+
+/* PDC PAT NVOLATILE  --  Access Non-Volatile Memory */
+
+#define PDC_PAT_NVOLATILE	73L
+#define PDC_PAT_NVOLATILE_READ		0L /* Read Non-Volatile Memory   */
+#define PDC_PAT_NVOLATILE_WRITE		1L /* Write Non-Volatile Memory  */
+#define PDC_PAT_NVOLATILE_GET_SIZE	2L /* Return size of NVM         */
+#define PDC_PAT_NVOLATILE_VERIFY	3L /* Verify contents of NVM     */
+#define PDC_PAT_NVOLATILE_INIT		4L /* Initialize NVM             */
+
+/* PDC PAT PD */
+#define PDC_PAT_PD		74L         /* Protection Domain Info   */
+#define PDC_PAT_PD_GET_ADDR_MAP		0L  /* Get Address Map          */
+
+/* PDC_PAT_PD_GET_ADDR_MAP entry types */
+#define PAT_MEMORY_DESCRIPTOR		1   
+
+/* PDC_PAT_PD_GET_ADDR_MAP memory types */
+#define PAT_MEMTYPE_MEMORY		0
+#define PAT_MEMTYPE_FIRMWARE		4
+
+/* PDC_PAT_PD_GET_ADDR_MAP memory usage */
+#define PAT_MEMUSE_GENERAL		0
+#define PAT_MEMUSE_GI			128
+#define PAT_MEMUSE_GNI			129
+
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+#ifdef CONFIG_64BIT
+#define is_pdc_pat()	(PDC_TYPE_PAT == pdc_type)
+extern int pdc_pat_get_irt_size(unsigned long *num_entries, unsigned long cell_num);
+extern int pdc_pat_get_irt(void *r_addr, unsigned long cell_num);
+#else	/* ! CONFIG_64BIT */
+/* No PAT support for 32-bit kernels...sorry */
+#define is_pdc_pat()	(0)
+#define pdc_pat_get_irt_size(num_entries, cell_numn)	PDC_BAD_PROC
+#define pdc_pat_get_irt(r_addr, cell_num)		PDC_BAD_PROC
+#endif	/* ! CONFIG_64BIT */
+
+
+struct pdc_pat_cell_num {
+	unsigned long cell_num;
+	unsigned long cell_loc;
+};
+
+struct pdc_pat_cpu_num {
+	unsigned long cpu_num;
+	unsigned long cpu_loc;
+};
+
+struct pdc_pat_pd_addr_map_entry {
+	unsigned char entry_type;       /* 1 = Memory Descriptor Entry Type */
+	unsigned char reserve1[5];
+	unsigned char memory_type;
+	unsigned char memory_usage;
+	unsigned long paddr;
+	unsigned int  pages;            /* Length in 4K pages */
+	unsigned int  reserve2;
+	unsigned long cell_map;
+};
+
+/********************************************************************
+* PDC_PAT_CELL[Return Cell Module] memaddr[0] conf_base_addr
+* ----------------------------------------------------------
+* Bit  0 to 51 - conf_base_addr
+* Bit 52 to 62 - reserved
+* Bit       63 - endianess bit
+********************************************************************/
+#define PAT_GET_CBA(value) ((value) & 0xfffffffffffff000UL)
+
+/********************************************************************
+* PDC_PAT_CELL[Return Cell Module] memaddr[1] mod_info
+* ----------------------------------------------------
+* Bit  0 to  7 - entity type
+*    0 = central agent,            1 = processor,
+*    2 = memory controller,        3 = system bus adapter,
+*    4 = local bus adapter,        5 = processor bus converter,
+*    6 = crossbar fabric connect,  7 = fabric interconnect,
+*    8 to 254 reserved,            255 = unknown.
+* Bit  8 to 15 - DVI
+* Bit 16 to 23 - IOC functions
+* Bit 24 to 39 - reserved
+* Bit 40 to 63 - mod_pages
+*    number of 4K pages a module occupies starting at conf_base_addr
+********************************************************************/
+#define PAT_GET_ENTITY(value)	(((value) >> 56) & 0xffUL)
+#define PAT_GET_DVI(value)	(((value) >> 48) & 0xffUL)
+#define PAT_GET_IOC(value)	(((value) >> 40) & 0xffUL)
+#define PAT_GET_MOD_PAGES(value) ((value) & 0xffffffUL)
+
+
+/*
+** PDC_PAT_CELL_GET_INFO return block
+*/
+typedef struct pdc_pat_cell_info_rtn_block {
+	unsigned long cpu_info;
+	unsigned long cell_info;
+	unsigned long cell_location;
+	unsigned long reo_location;
+	unsigned long mem_size;
+	unsigned long dimm_status;
+	unsigned long pdc_rev;
+	unsigned long fabric_info0;
+	unsigned long fabric_info1;
+	unsigned long fabric_info2;
+	unsigned long fabric_info3;
+	unsigned long reserved[21];
+} pdc_pat_cell_info_rtn_block_t;
+
+
+/* FIXME: mod[508] should really be a union of the various mod components */
+struct pdc_pat_cell_mod_maddr_block {	/* PDC_PAT_CELL_MODULE */
+	unsigned long cba;		/* func 0 cfg space address */
+	unsigned long mod_info;		/* module information */
+	unsigned long mod_location;	/* physical location of the module */
+	struct hardware_path mod_path;	/* module path (device path - layers) */
+	unsigned long mod[508];		/* PAT cell module components */
+} __attribute__((aligned(8))) ;
+
+typedef struct pdc_pat_cell_mod_maddr_block pdc_pat_cell_mod_maddr_block_t;
+
+
+extern int pdc_pat_chassis_send_log(unsigned long status, unsigned long data);
+extern int pdc_pat_cell_get_number(struct pdc_pat_cell_num *cell_info);
+extern int pdc_pat_cell_module(unsigned long *actcnt, unsigned long ploc, unsigned long mod, unsigned long view_type, void *mem_addr);
+extern int pdc_pat_cell_num_to_loc(void *, unsigned long);
+
+extern int pdc_pat_cpu_get_number(struct pdc_pat_cpu_num *cpu_info, void *hpa);
+
+extern int pdc_pat_pd_get_addr_map(unsigned long *actual_len, void *mem_addr, unsigned long count, unsigned long offset);
+
+
+extern int pdc_pat_io_pci_cfg_read(unsigned long pci_addr, int pci_size, u32 *val); 
+extern int pdc_pat_io_pci_cfg_write(unsigned long pci_addr, int pci_size, u32 val); 
+
+
+/* Flag to indicate this is a PAT box...don't use this unless you
+** really have to...it might go away some day.
+*/
+extern int pdc_pat;     /* arch/parisc/kernel/inventory.c */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* ! __PARISC_PATPDC_H */
diff --git a/arch/parisc/include/asm/percpu.h b/arch/parisc/include/asm/percpu.h
new file mode 100644
index 0000000..a0dcd19
--- /dev/null
+++ b/arch/parisc/include/asm/percpu.h
@@ -0,0 +1,7 @@
+#ifndef _PARISC_PERCPU_H
+#define _PARISC_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif 
+
diff --git a/arch/parisc/include/asm/perf.h b/arch/parisc/include/asm/perf.h
new file mode 100644
index 0000000..a18e119
--- /dev/null
+++ b/arch/parisc/include/asm/perf.h
@@ -0,0 +1,74 @@
+#ifndef _ASM_PERF_H_
+#define _ASM_PERF_H_
+
+/* ioctls */
+#define PA_PERF_ON	_IO('p', 1)
+#define PA_PERF_OFF	_IOR('p', 2, unsigned int)
+#define PA_PERF_VERSION	_IOR('p', 3, int)
+
+#define PA_PERF_DEV	"perf"
+#define PA_PERF_MINOR	146
+
+/* Interface types */
+#define UNKNOWN_INTF    255
+#define ONYX_INTF         0
+#define CUDA_INTF         1
+
+/* Common Onyx and Cuda images */
+#define CPI                 0
+#define BUSUTIL             1
+#define TLBMISS             2
+#define TLBHANDMISS         3
+#define PTKN                4
+#define PNTKN               5
+#define IMISS               6
+#define DMISS               7
+#define DMISS_ACCESS        8 
+#define BIG_CPI 	    9
+#define BIG_LS		   10  
+#define BR_ABORT	   11
+#define ISNT		   12 
+#define QUADRANT           13
+#define RW_PDFET           14
+#define RW_WDFET           15
+#define SHLIB_CPI          16
+
+/* Cuda only Images */
+#define FLOPS              17
+#define CACHEMISS          18 
+#define BRANCHES           19             
+#define CRSTACK            20 
+#define I_CACHE_SPEC       21 
+#define MAX_CUDA_IMAGES    22 
+
+/* Onyx only Images */
+#define ADDR_INV_ABORT_ALU 17
+#define BRAD_STALL	   18 
+#define CNTL_IN_PIPEL	   19 
+#define DSNT_XFH	   20 
+#define FET_SIG1	   21 
+#define FET_SIG2	   22 
+#define G7_1		   23 
+#define G7_2		   24 
+#define G7_3 		   25
+#define G7_4		   26
+#define MPB_LABORT         27
+#define PANIC              28
+#define RARE_INST          29 
+#define RW_DFET            30 
+#define RW_IFET            31 
+#define RW_SDFET           32 
+#define SPEC_IFET          33 
+#define ST_COND0           34 
+#define ST_COND1           35 
+#define ST_COND2           36
+#define ST_COND3           37
+#define ST_COND4           38
+#define ST_UNPRED0         39 
+#define ST_UNPRED1         40 
+#define UNPRED             41 
+#define GO_STORE           42
+#define SHLIB_CALL         43
+#define MAX_ONYX_IMAGES    44
+
+#endif
diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h
new file mode 100644
index 0000000..fc987a1
--- /dev/null
+++ b/arch/parisc/include/asm/pgalloc.h
@@ -0,0 +1,149 @@
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <linux/gfp.h>
+#include <linux/mm.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+
+#include <asm/cache.h>
+
+/* Allocate the top level pgd (page directory)
+ *
+ * Here (for 64 bit kernels) we implement a Hybrid L2/L3 scheme: we
+ * allocate the first pmd adjacent to the pgd.  This means that we can
+ * subtract a constant offset to get to it.  The pmd and pgd sizes are
+ * arranged so that a single pmd covers 4GB (giving a full 64-bit
+ * process access to 8TB) so our lookups are effectively L2 for the
+ * first 4GB of the kernel (i.e. for all ILP32 processes and all the
+ * kernel for machines with under 4GB of memory) */
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd = (pgd_t *)__get_free_pages(GFP_KERNEL,
+					       PGD_ALLOC_ORDER);
+	pgd_t *actual_pgd = pgd;
+
+	if (likely(pgd != NULL)) {
+		memset(pgd, 0, PAGE_SIZE<<PGD_ALLOC_ORDER);
+#ifdef CONFIG_64BIT
+		actual_pgd += PTRS_PER_PGD;
+		/* Populate first pmd with allocated memory.  We mark it
+		 * with PxD_FLAG_ATTACHED as a signal to the system that this
+		 * pmd entry may not be cleared. */
+		__pgd_val_set(*actual_pgd, (PxD_FLAG_PRESENT | 
+				        PxD_FLAG_VALID | 
+					PxD_FLAG_ATTACHED) 
+			+ (__u32)(__pa((unsigned long)pgd) >> PxD_VALUE_SHIFT));
+		/* The first pmd entry also is marked with _PAGE_GATEWAY as
+		 * a signal that this pmd may not be freed */
+		__pgd_val_set(*pgd, PxD_FLAG_ATTACHED);
+#endif
+	}
+	return actual_pgd;
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+#ifdef CONFIG_64BIT
+	pgd -= PTRS_PER_PGD;
+#endif
+	free_pages((unsigned long)pgd, PGD_ALLOC_ORDER);
+}
+
+#if PT_NLEVELS == 3
+
+/* Three Level Page Table Support for pmd's */
+
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+{
+	__pgd_val_set(*pgd, (PxD_FLAG_PRESENT | PxD_FLAG_VALID) +
+		        (__u32)(__pa((unsigned long)pmd) >> PxD_VALUE_SHIFT));
+}
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pmd_t *pmd = (pmd_t *)__get_free_pages(GFP_KERNEL|__GFP_REPEAT,
+					       PMD_ORDER);
+	if (pmd)
+		memset(pmd, 0, PAGE_SIZE<<PMD_ORDER);
+	return pmd;
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+#ifdef CONFIG_64BIT
+	if(pmd_flag(*pmd) & PxD_FLAG_ATTACHED)
+		/* This is the permanent pmd attached to the pgd;
+		 * cannot free it */
+		return;
+#endif
+	free_pages((unsigned long)pmd, PMD_ORDER);
+}
+
+#else
+
+/* Two Level Page Table Support for pmd's */
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+
+#define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(mm, x)			do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+
+#endif
+
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+#ifdef CONFIG_64BIT
+	/* preserve the gateway marker if this is the beginning of
+	 * the permanent pmd */
+	if(pmd_flag(*pmd) & PxD_FLAG_ATTACHED)
+		__pmd_val_set(*pmd, (PxD_FLAG_PRESENT |
+				 PxD_FLAG_VALID |
+				 PxD_FLAG_ATTACHED) 
+			+ (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT));
+	else
+#endif
+		__pmd_val_set(*pmd, (PxD_FLAG_PRESENT | PxD_FLAG_VALID) 
+			+ (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT));
+}
+
+#define pmd_populate(mm, pmd, pte_page) \
+	pmd_populate_kernel(mm, pmd, page_address(pte_page))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline pgtable_t
+pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	struct page *page = alloc_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	if (page)
+		pgtable_page_ctor(page);
+	return page;
+}
+
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+	pgtable_page_dtor(pte);
+	pte_free_kernel(mm, page_address(pte));
+}
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
new file mode 100644
index 0000000..470a4b8
--- /dev/null
+++ b/arch/parisc/include/asm/pgtable.h
@@ -0,0 +1,508 @@
+#ifndef _PARISC_PGTABLE_H
+#define _PARISC_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <asm/fixmap.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * we simulate an x86-style page table for the linux mm code
+ */
+
+#include <linux/mm.h>		/* for vm_area_struct */
+#include <linux/bitops.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+
+/*
+ * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
+ * memory.  For the return value to be meaningful, ADDR must be >=
+ * PAGE_OFFSET.  This operation can be relatively expensive (e.g.,
+ * require a hash-, or multi-level tree-lookup or something of that
+ * sort) but it guarantees to return TRUE only if accessing the page
+ * at that address does not cause an error.  Note that there may be
+ * addresses for which kern_addr_valid() returns FALSE even though an
+ * access would not cause an error (e.g., this is typically true for
+ * memory mapped I/O regions.
+ *
+ * XXX Need to implement this for parisc.
+ */
+#define kern_addr_valid(addr)	(1)
+
+/* Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)                                 \
+        do{                                                     \
+                *(pteptr) = (pteval);                           \
+        } while(0)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+#endif /* !__ASSEMBLY__ */
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, (unsigned long)pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
+
+/* This is the size of the initially mapped kernel memory */
+#ifdef CONFIG_64BIT
+#define KERNEL_INITIAL_ORDER	24	/* 0 to 1<<24 = 16MB */
+#else
+#define KERNEL_INITIAL_ORDER	23	/* 0 to 1<<23 = 8MB */
+#endif
+#define KERNEL_INITIAL_SIZE	(1 << KERNEL_INITIAL_ORDER)
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+#define PT_NLEVELS	3
+#define PGD_ORDER	1 /* Number of pages per pgd */
+#define PMD_ORDER	1 /* Number of pages per pmd */
+#define PGD_ALLOC_ORDER	2 /* first pgd contains pmd */
+#else
+#define PT_NLEVELS	2
+#define PGD_ORDER	1 /* Number of pages per pgd */
+#define PGD_ALLOC_ORDER	PGD_ORDER
+#endif
+
+/* Definitions for 3rd level (we use PLD here for Page Lower directory
+ * because PTE_SHIFT is used lower down to mean shift that has to be
+ * done to get usable bits out of the PTE) */
+#define PLD_SHIFT	PAGE_SHIFT
+#define PLD_SIZE	PAGE_SIZE
+#define BITS_PER_PTE	(PAGE_SHIFT - BITS_PER_PTE_ENTRY)
+#define PTRS_PER_PTE    (1UL << BITS_PER_PTE)
+
+/* Definitions for 2nd level */
+#define pgtable_cache_init()	do { } while (0)
+
+#define PMD_SHIFT       (PLD_SHIFT + BITS_PER_PTE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#if PT_NLEVELS == 3
+#define BITS_PER_PMD	(PAGE_SHIFT + PMD_ORDER - BITS_PER_PMD_ENTRY)
+#else
+#define BITS_PER_PMD	0
+#endif
+#define PTRS_PER_PMD    (1UL << BITS_PER_PMD)
+
+/* Definitions for 1st level */
+#define PGDIR_SHIFT	(PMD_SHIFT + BITS_PER_PMD)
+#define BITS_PER_PGD	(PAGE_SHIFT + PGD_ORDER - BITS_PER_PGD_ENTRY)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD    (1UL << BITS_PER_PGD)
+#define USER_PTRS_PER_PGD       PTRS_PER_PGD
+
+#define MAX_ADDRBITS	(PGDIR_SHIFT + BITS_PER_PGD)
+#define MAX_ADDRESS	(1UL << MAX_ADDRBITS)
+
+#define SPACEID_SHIFT	(MAX_ADDRBITS - 32)
+
+/* This calculates the number of initial pages we need for the initial
+ * page tables */
+#if (KERNEL_INITIAL_ORDER) >= (PMD_SHIFT)
+# define PT_INITIAL	(1 << (KERNEL_INITIAL_ORDER - PMD_SHIFT))
+#else
+# define PT_INITIAL	(1)  /* all initial PTEs fit into one page */
+#endif
+
+/*
+ * pgd entries used up by user/kernel:
+ */
+
+#define FIRST_USER_ADDRESS	0
+
+/* NB: The tlb miss handlers make certain assumptions about the order */
+/*     of the following bits, so be careful (One example, bits 25-31  */
+/*     are moved together in one instruction).                        */
+
+#define _PAGE_READ_BIT     31   /* (0x001) read access allowed */
+#define _PAGE_WRITE_BIT    30   /* (0x002) write access allowed */
+#define _PAGE_EXEC_BIT     29   /* (0x004) execute access allowed */
+#define _PAGE_GATEWAY_BIT  28   /* (0x008) privilege promotion allowed */
+#define _PAGE_DMB_BIT      27   /* (0x010) Data Memory Break enable (B bit) */
+#define _PAGE_DIRTY_BIT    26   /* (0x020) Page Dirty (D bit) */
+#define _PAGE_FILE_BIT	_PAGE_DIRTY_BIT	/* overload this bit */
+#define _PAGE_REFTRAP_BIT  25   /* (0x040) Page Ref. Trap enable (T bit) */
+#define _PAGE_NO_CACHE_BIT 24   /* (0x080) Uncached Page (U bit) */
+#define _PAGE_ACCESSED_BIT 23   /* (0x100) Software: Page Accessed */
+#define _PAGE_PRESENT_BIT  22   /* (0x200) Software: translation valid */
+#define _PAGE_FLUSH_BIT    21   /* (0x400) Software: translation valid */
+				/*             for cache flushing only */
+#define _PAGE_USER_BIT     20   /* (0x800) Software: User accessible page */
+
+/* N.B. The bits are defined in terms of a 32 bit word above, so the */
+/*      following macro is ok for both 32 and 64 bit.                */
+
+#define xlate_pabit(x) (31 - x)
+
+/* this defines the shift to the usable bits in the PTE it is set so
+ * that the valid bits _PAGE_PRESENT_BIT and _PAGE_USER_BIT are set
+ * to zero */
+#define PTE_SHIFT	   	xlate_pabit(_PAGE_USER_BIT)
+
+/* PFN_PTE_SHIFT defines the shift of a PTE value to access the PFN field */
+#define PFN_PTE_SHIFT		12
+
+
+/* this is how many bits may be used by the file functions */
+#define PTE_FILE_MAX_BITS	(BITS_PER_LONG - PTE_SHIFT)
+
+#define pte_to_pgoff(pte) (pte_val(pte) >> PTE_SHIFT)
+#define pgoff_to_pte(off) ((pte_t) { ((off) << PTE_SHIFT) | _PAGE_FILE })
+
+#define _PAGE_READ     (1 << xlate_pabit(_PAGE_READ_BIT))
+#define _PAGE_WRITE    (1 << xlate_pabit(_PAGE_WRITE_BIT))
+#define _PAGE_RW       (_PAGE_READ | _PAGE_WRITE)
+#define _PAGE_EXEC     (1 << xlate_pabit(_PAGE_EXEC_BIT))
+#define _PAGE_GATEWAY  (1 << xlate_pabit(_PAGE_GATEWAY_BIT))
+#define _PAGE_DMB      (1 << xlate_pabit(_PAGE_DMB_BIT))
+#define _PAGE_DIRTY    (1 << xlate_pabit(_PAGE_DIRTY_BIT))
+#define _PAGE_REFTRAP  (1 << xlate_pabit(_PAGE_REFTRAP_BIT))
+#define _PAGE_NO_CACHE (1 << xlate_pabit(_PAGE_NO_CACHE_BIT))
+#define _PAGE_ACCESSED (1 << xlate_pabit(_PAGE_ACCESSED_BIT))
+#define _PAGE_PRESENT  (1 << xlate_pabit(_PAGE_PRESENT_BIT))
+#define _PAGE_FLUSH    (1 << xlate_pabit(_PAGE_FLUSH_BIT))
+#define _PAGE_USER     (1 << xlate_pabit(_PAGE_USER_BIT))
+#define _PAGE_FILE     (1 << xlate_pabit(_PAGE_FILE_BIT))
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE |  _PAGE_DIRTY | _PAGE_ACCESSED)
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_KERNEL	(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_WRITE | _PAGE_DIRTY | _PAGE_ACCESSED)
+
+/* The pgd/pmd contains a ptr (in phys addr space); since all pgds/pmds
+ * are page-aligned, we don't care about the PAGE_OFFSET bits, except
+ * for a few meta-information bits, so we shift the address to be
+ * able to effectively address 40/42/44-bits of physical address space
+ * depending on 4k/16k/64k PAGE_SIZE */
+#define _PxD_PRESENT_BIT   31
+#define _PxD_ATTACHED_BIT  30
+#define _PxD_VALID_BIT     29
+
+#define PxD_FLAG_PRESENT  (1 << xlate_pabit(_PxD_PRESENT_BIT))
+#define PxD_FLAG_ATTACHED (1 << xlate_pabit(_PxD_ATTACHED_BIT))
+#define PxD_FLAG_VALID    (1 << xlate_pabit(_PxD_VALID_BIT))
+#define PxD_FLAG_MASK     (0xf)
+#define PxD_FLAG_SHIFT    (4)
+#define PxD_VALUE_SHIFT   (8) /* (PAGE_SHIFT-PxD_FLAG_SHIFT) */
+
+#ifndef __ASSEMBLY__
+
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_WRITE | _PAGE_ACCESSED)
+/* Others seem to make this executable, I don't know if that's correct
+   or not.  The stack is mapped this way though so this is necessary
+   in the short term - dhd@linuxcare.com, 2000-08-08 */
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_ACCESSED)
+#define PAGE_WRITEONLY  __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITE | _PAGE_ACCESSED)
+#define PAGE_EXECREAD   __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_EXEC |_PAGE_ACCESSED)
+#define PAGE_COPY       PAGE_EXECREAD
+#define PAGE_RWX        __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_WRITE | _PAGE_EXEC |_PAGE_ACCESSED)
+#define PAGE_KERNEL	__pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_KERNEL & ~_PAGE_WRITE)
+#define PAGE_KERNEL_UNC	__pgprot(_PAGE_KERNEL | _PAGE_NO_CACHE)
+#define PAGE_GATEWAY    __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_GATEWAY| _PAGE_READ)
+#define PAGE_FLUSH      __pgprot(_PAGE_FLUSH)
+
+
+/*
+ * We could have an execute only page using "gateway - promote to priv
+ * level 3", but that is kind of silly. So, the way things are defined
+ * now, we must always have read permission for pages with execute
+ * permission. For the fun of it we'll go ahead and support write only
+ * pages.
+ */
+
+	 /*xwr*/
+#define __P000  PAGE_NONE
+#define __P001  PAGE_READONLY
+#define __P010  __P000 /* copy on write */
+#define __P011  __P001 /* copy on write */
+#define __P100  PAGE_EXECREAD
+#define __P101  PAGE_EXECREAD
+#define __P110  __P100 /* copy on write */
+#define __P111  __P101 /* copy on write */
+
+#define __S000  PAGE_NONE
+#define __S001  PAGE_READONLY
+#define __S010  PAGE_WRITEONLY
+#define __S011  PAGE_SHARED
+#define __S100  PAGE_EXECREAD
+#define __S101  PAGE_EXECREAD
+#define __S110  PAGE_RWX
+#define __S111  PAGE_RWX
+
+
+extern pgd_t swapper_pg_dir[]; /* declared in init_task.c */
+
+/* initial page tables for 0-8MB for kernel */
+
+extern pte_t pg0[];
+
+/* zero page used for uninitialized stuff */
+
+extern unsigned long *empty_zero_page;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#define pte_none(x)     ((pte_val(x) == 0) || (pte_val(x) & _PAGE_FLUSH))
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp)	do { pte_val(*(xp)) = 0; } while (0)
+
+#define pmd_flag(x)	(pmd_val(x) & PxD_FLAG_MASK)
+#define pmd_address(x)	((unsigned long)(pmd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT)
+#define pgd_flag(x)	(pgd_val(x) & PxD_FLAG_MASK)
+#define pgd_address(x)	((unsigned long)(pgd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT)
+
+#if PT_NLEVELS == 3
+/* The first entry of the permanent pmd is not there if it contains
+ * the gateway marker */
+#define pmd_none(x)	(!pmd_val(x) || pmd_flag(x) == PxD_FLAG_ATTACHED)
+#else
+#define pmd_none(x)	(!pmd_val(x))
+#endif
+#define pmd_bad(x)	(!(pmd_flag(x) & PxD_FLAG_VALID))
+#define pmd_present(x)	(pmd_flag(x) & PxD_FLAG_PRESENT)
+static inline void pmd_clear(pmd_t *pmd) {
+#if PT_NLEVELS == 3
+	if (pmd_flag(*pmd) & PxD_FLAG_ATTACHED)
+		/* This is the entry pointing to the permanent pmd
+		 * attached to the pgd; cannot clear it */
+		__pmd_val_set(*pmd, PxD_FLAG_ATTACHED);
+	else
+#endif
+		__pmd_val_set(*pmd,  0);
+}
+
+
+
+#if PT_NLEVELS == 3
+#define pgd_page_vaddr(pgd) ((unsigned long) __va(pgd_address(pgd)))
+#define pgd_page(pgd)	virt_to_page((void *)pgd_page_vaddr(pgd))
+
+/* For 64 bit we have three level tables */
+
+#define pgd_none(x)     (!pgd_val(x))
+#define pgd_bad(x)      (!(pgd_flag(x) & PxD_FLAG_VALID))
+#define pgd_present(x)  (pgd_flag(x) & PxD_FLAG_PRESENT)
+static inline void pgd_clear(pgd_t *pgd) {
+#if PT_NLEVELS == 3
+	if(pgd_flag(*pgd) & PxD_FLAG_ATTACHED)
+		/* This is the permanent pmd attached to the pgd; cannot
+		 * free it */
+		return;
+#endif
+	__pgd_val_set(*pgd, 0);
+}
+#else
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+static inline void pgd_clear(pgd_t * pgdp)	{ }
+#endif
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_special(pte_t pte)	{ return 0; }
+
+static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) &= ~_PAGE_WRITE; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= _PAGE_WRITE; return pte; }
+static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define __mk_pte(addr,pgprot) \
+({									\
+	pte_t __pte;							\
+									\
+	pte_val(__pte) = ((((addr)>>PAGE_SHIFT)<<PFN_PTE_SHIFT) + pgprot_val(pgprot));	\
+									\
+	__pte;								\
+})
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
+{
+	pte_t pte;
+	pte_val(pte) = (pfn << PFN_PTE_SHIFT) | pgprot_val(pgprot);
+	return pte;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
+
+/* Permanent address of a page.  On parisc we don't have highmem. */
+
+#define pte_pfn(x)		(pte_val(x) >> PFN_PTE_SHIFT)
+
+#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
+
+#define pmd_page_vaddr(pmd)	((unsigned long) __va(pmd_address(pmd)))
+
+#define __pmd_page(pmd) ((unsigned long) __va(pmd_address(pmd)))
+#define pmd_page(pmd)	virt_to_page((void *)__pmd_page(pmd))
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, address) \
+((mm)->pgd + ((address) >> PGDIR_SHIFT))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+
+#if PT_NLEVELS == 3
+#define pmd_offset(dir,address) \
+((pmd_t *) pgd_page_vaddr(*(dir)) + (((address)>>PMD_SHIFT) & (PTRS_PER_PMD-1)))
+#else
+#define pmd_offset(dir,addr) ((pmd_t *) dir)
+#endif
+
+/* Find an entry in the third-level page table.. */ 
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
+#define pte_offset_kernel(pmd, address) \
+	((pte_t *) pmd_page_vaddr(*(pmd)) + pte_index(address))
+#define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address)
+#define pte_offset_map_nested(pmd, address) pte_offset_kernel(pmd, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+extern void paging_init (void);
+
+/* Used for deferring calls to flush_dcache_page() */
+
+#define PG_dcache_dirty         PG_arch_1
+
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+/* Encode and de-code a swap entry */
+
+#define __swp_type(x)                     ((x).val & 0x1f)
+#define __swp_offset(x)                   ( (((x).val >> 6) &  0x7) | \
+					  (((x).val >> 8) & ~0x7) )
+#define __swp_entry(type, offset)         ((swp_entry_t) { (type) | \
+					    ((offset &  0x7) << 6) | \
+					    ((offset & ~0x7) << 8) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	if (!pte_young(*ptep))
+		return 0;
+	return test_and_clear_bit(xlate_pabit(_PAGE_ACCESSED_BIT), &pte_val(*ptep));
+#else
+	pte_t pte = *ptep;
+	if (!pte_young(pte))
+		return 0;
+	set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte));
+	return 1;
+#endif
+}
+
+extern spinlock_t pa_dbit_lock;
+
+struct mm_struct;
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_t old_pte;
+	pte_t pte;
+
+	spin_lock(&pa_dbit_lock);
+	pte = old_pte = *ptep;
+	pte_val(pte) &= ~_PAGE_PRESENT;
+	pte_val(pte) |= _PAGE_FLUSH;
+	set_pte_at(mm,addr,ptep,pte);
+	spin_unlock(&pa_dbit_lock);
+
+	return old_pte;
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	unsigned long new, old;
+
+	do {
+		old = pte_val(*ptep);
+		new = pte_val(pte_wrprotect(__pte (old)));
+	} while (cmpxchg((unsigned long *) ptep, old, new) != old);
+#else
+	pte_t old_pte = *ptep;
+	set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+#endif
+}
+
+#define pte_same(A,B)	(pte_val(A) == pte_val(B))
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* TLB page size encoding - see table 3-1 in parisc20.pdf */
+#define _PAGE_SIZE_ENCODING_4K		0
+#define _PAGE_SIZE_ENCODING_16K		1
+#define _PAGE_SIZE_ENCODING_64K		2
+#define _PAGE_SIZE_ENCODING_256K	3
+#define _PAGE_SIZE_ENCODING_1M		4
+#define _PAGE_SIZE_ENCODING_4M		5
+#define _PAGE_SIZE_ENCODING_16M		6
+#define _PAGE_SIZE_ENCODING_64M		7
+
+#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_4K
+#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB)
+# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_16K
+#elif defined(CONFIG_PARISC_PAGE_SIZE_64KB)
+# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_64K
+#endif
+
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE)
+
+/* We provide our own get_unmapped_area to provide cache coherency */
+
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* _PARISC_PGTABLE_H */
diff --git a/arch/parisc/include/asm/poll.h b/arch/parisc/include/asm/poll.h
new file mode 100644
index 0000000..c98509d
--- /dev/null
+++ b/arch/parisc/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/parisc/include/asm/posix_types.h b/arch/parisc/include/asm/posix_types.h
new file mode 100644
index 0000000..bb725a6
--- /dev/null
+++ b/arch/parisc/include/asm/posix_types.h
@@ -0,0 +1,129 @@
+#ifndef __ARCH_PARISC_POSIX_TYPES_H
+#define __ARCH_PARISC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+typedef unsigned long		__kernel_ino_t;
+typedef unsigned short		__kernel_mode_t;
+typedef unsigned short		__kernel_nlink_t;
+typedef long			__kernel_off_t;
+typedef int			__kernel_pid_t;
+typedef unsigned short		__kernel_ipc_pid_t;
+typedef unsigned int		__kernel_uid_t;
+typedef unsigned int		__kernel_gid_t;
+typedef int			__kernel_suseconds_t;
+typedef long			__kernel_clock_t;
+typedef int			__kernel_timer_t;
+typedef int			__kernel_clockid_t;
+typedef int			__kernel_daddr_t;
+/* Note these change from narrow to wide kernels */
+#ifdef CONFIG_64BIT
+typedef unsigned long		__kernel_size_t;
+typedef long			__kernel_ssize_t;
+typedef long			__kernel_ptrdiff_t;
+typedef long			__kernel_time_t;
+#else
+typedef unsigned int		__kernel_size_t;
+typedef int			__kernel_ssize_t;
+typedef int			__kernel_ptrdiff_t;
+typedef long			__kernel_time_t;
+#endif
+typedef char *			__kernel_caddr_t;
+
+typedef unsigned short		__kernel_uid16_t;
+typedef unsigned short		__kernel_gid16_t;
+typedef unsigned int		__kernel_uid32_t;
+typedef unsigned int		__kernel_gid32_t;
+
+#ifdef __GNUC__
+typedef long long		__kernel_loff_t;
+typedef long long		__kernel_off64_t;
+typedef unsigned long long	__kernel_ino64_t;
+#endif
+
+typedef unsigned int		__kernel_old_dev_t;
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+/* compatibility stuff */
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{ 
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif
diff --git a/arch/parisc/include/asm/prefetch.h b/arch/parisc/include/asm/prefetch.h
new file mode 100644
index 0000000..c5edc60
--- /dev/null
+++ b/arch/parisc/include/asm/prefetch.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-parisc/prefetch.h
+ *
+ * PA 2.0 defines data prefetch instructions on page 6-11 of the Kane book.
+ * In addition, many implementations do hardware prefetching of both
+ * instructions and data.
+ *
+ * PA7300LC (page 14-4 of the ERS) also implements prefetching by a load
+ * to gr0 but not in a way that Linux can use.  If the load would cause an
+ * interruption (eg due to prefetching 0), it is suppressed on PA2.0
+ * processors, but not on 7300LC.
+ *
+ */
+
+#ifndef __ASM_PARISC_PREFETCH_H
+#define __ASM_PARISC_PREFETCH_H
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PREFETCH
+
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *addr)
+{
+	__asm__("ldw 0(%0), %%r0" : : "r" (addr));
+}
+
+/* LDD is a PA2.0 addition. */
+#ifdef CONFIG_PA20
+#define ARCH_HAS_PREFETCHW
+static inline void prefetchw(const void *addr)
+{
+	__asm__("ldd 0(%0), %%r0" : : "r" (addr));
+}
+#endif /* CONFIG_PA20 */
+
+#endif /* CONFIG_PREFETCH */
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_PARISC_PROCESSOR_H */
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
new file mode 100644
index 0000000..3c9d348
--- /dev/null
+++ b/arch/parisc/include/asm/processor.h
@@ -0,0 +1,357 @@
+/*
+ * include/asm-parisc/processor.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ * Copyright (C) 2001 Grant Grundler
+ */
+
+#ifndef __ASM_PARISC_PROCESSOR_H
+#define __ASM_PARISC_PROCESSOR_H
+
+#ifndef __ASSEMBLY__
+#include <linux/threads.h>
+
+#include <asm/prefetch.h>
+#include <asm/hardware.h>
+#include <asm/pdc.h>
+#include <asm/ptrace.h>
+#include <asm/types.h>
+#include <asm/system.h>
+#endif /* __ASSEMBLY__ */
+
+#define KERNEL_STACK_SIZE 	(4*PAGE_SIZE)
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#ifdef CONFIG_PA20
+#define current_ia(x)	__asm__("mfia %0" : "=r"(x))
+#else /* mfia added in pa2.0 */
+#define current_ia(x)	__asm__("blr 0,%0\n\tnop" : "=r"(x))
+#endif
+#define current_text_addr() ({ void *pc; current_ia(pc); pc; })
+
+#define TASK_SIZE_OF(tsk)       ((tsk)->thread.task_size)
+#define TASK_SIZE	        TASK_SIZE_OF(current)
+#define TASK_UNMAPPED_BASE      (current->thread.map_base)
+
+#define DEFAULT_TASK_SIZE32	(0xFFF00000UL)
+#define DEFAULT_MAP_BASE32	(0x40000000UL)
+
+#ifdef CONFIG_64BIT
+#define DEFAULT_TASK_SIZE       (MAX_ADDRESS-0xf000000)
+#define DEFAULT_MAP_BASE        (0x200000000UL)
+#else
+#define DEFAULT_TASK_SIZE	DEFAULT_TASK_SIZE32
+#define DEFAULT_MAP_BASE	DEFAULT_MAP_BASE32
+#endif
+
+#ifdef __KERNEL__
+
+/* XXX: STACK_TOP actually should be STACK_BOTTOM for parisc.
+ * prumpf */
+
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	DEFAULT_TASK_SIZE
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Data detected about CPUs at boot time which is the same for all CPU's.
+ * HP boxes are SMP - ie identical processors.
+ *
+ * FIXME: some CPU rev info may be processor specific...
+ */
+struct system_cpuinfo_parisc {
+	unsigned int	cpu_count;
+	unsigned int	cpu_hz;
+	unsigned int	hversion;
+	unsigned int	sversion;
+	enum cpu_type	cpu_type;
+
+	struct {
+		struct pdc_model model;
+		unsigned long versions;
+		unsigned long cpuid;
+		unsigned long capabilities;
+		char   sys_model_name[81]; /* PDC-ROM returnes this model name */
+	} pdc;
+
+	const char	*cpu_name;	/* e.g. "PA7300LC (PCX-L2)" */
+	const char	*family_name;	/* e.g. "1.1e" */
+};
+
+
+/* Per CPU data structure - ie varies per CPU.  */
+struct cpuinfo_parisc {
+	unsigned long it_value;     /* Interval Timer at last timer Intr */
+	unsigned long it_delta;     /* Interval delta (tic_10ms / HZ * 100) */
+	unsigned long irq_count;    /* number of IRQ's since boot */
+	unsigned long irq_max_cr16; /* longest time to handle a single IRQ */
+	unsigned long cpuid;        /* aka slot_number or set to NO_PROC_ID */
+	unsigned long hpa;          /* Host Physical address */
+	unsigned long txn_addr;     /* MMIO addr of EIR or id_eid */
+#ifdef CONFIG_SMP
+	unsigned long pending_ipi;  /* bitmap of type ipi_message_type */
+	unsigned long ipi_count;    /* number ipi Interrupts */
+#endif
+	unsigned long bh_count;     /* number of times bh was invoked */
+	unsigned long prof_counter; /* per CPU profiling support */
+	unsigned long prof_multiplier;	/* per CPU profiling support */
+	unsigned long fp_rev;
+	unsigned long fp_model;
+	unsigned int state;
+	struct parisc_device *dev;
+	unsigned long loops_per_jiffy;
+};
+
+extern struct system_cpuinfo_parisc boot_cpu_data;
+extern struct cpuinfo_parisc cpu_data[NR_CPUS];
+#define current_cpu_data cpu_data[smp_processor_id()]
+
+#define CPU_HVERSION ((boot_cpu_data.hversion >> 4) & 0x0FFF)
+
+typedef struct {
+	int seg;  
+} mm_segment_t;
+
+#define ARCH_MIN_TASKALIGN	8
+
+struct thread_struct {
+	struct pt_regs regs;
+	unsigned long  task_size;
+	unsigned long  map_base;
+	unsigned long  flags;
+}; 
+
+/* Thread struct flags. */
+#define PARISC_UAC_NOPRINT	(1UL << 0)	/* see prctl and unaligned.c */
+#define PARISC_UAC_SIGBUS	(1UL << 1)
+#define PARISC_KERNEL_DEATH	(1UL << 31)	/* see die_if_kernel()... */
+
+#define PARISC_UAC_SHIFT	0
+#define PARISC_UAC_MASK		(PARISC_UAC_NOPRINT|PARISC_UAC_SIGBUS)
+
+#define SET_UNALIGN_CTL(task,value)                                       \
+        ({                                                                \
+        (task)->thread.flags = (((task)->thread.flags & ~PARISC_UAC_MASK) \
+                                | (((value) << PARISC_UAC_SHIFT) &        \
+                                   PARISC_UAC_MASK));                     \
+        0;                                                                \
+        })
+
+#define GET_UNALIGN_CTL(task,addr)                                        \
+        ({                                                                \
+        put_user(((task)->thread.flags & PARISC_UAC_MASK)                 \
+                 >> PARISC_UAC_SHIFT, (int __user *) (addr));             \
+        })
+
+#define INIT_THREAD { \
+	.regs = {	.gr	= { 0, }, \
+			.fr	= { 0, }, \
+			.sr	= { 0, }, \
+			.iasq	= { 0, }, \
+			.iaoq	= { 0, }, \
+			.cr27	= 0, \
+		}, \
+	.task_size	= DEFAULT_TASK_SIZE, \
+	.map_base	= DEFAULT_MAP_BASE, \
+	.flags		= 0 \
+	}
+
+/*
+ * Return saved PC of a blocked thread.  This is used by ps mostly.
+ */
+
+unsigned long thread_saved_pc(struct task_struct *t);
+void show_trace(struct task_struct *task, unsigned long *stack);
+
+/*
+ * Start user thread in another space.
+ *
+ * Note that we set both the iaoq and r31 to the new pc. When
+ * the kernel initially calls execve it will return through an
+ * rfi path that will use the values in the iaoq. The execve
+ * syscall path will return through the gateway page, and
+ * that uses r31 to branch to.
+ *
+ * For ELF we clear r23, because the dynamic linker uses it to pass
+ * the address of the finalizer function.
+ *
+ * We also initialize sr3 to an illegal value (illegal for our
+ * implementation, not for the architecture).
+ */
+typedef unsigned int elf_caddr_t;
+
+#define start_thread_som(regs, new_pc, new_sp) do {	\
+	unsigned long *sp = (unsigned long *)new_sp;	\
+	__u32 spaceid = (__u32)current->mm->context;	\
+	unsigned long pc = (unsigned long)new_pc;	\
+	/* offset pc for priv. level */			\
+	pc |= 3;					\
+							\
+	set_fs(USER_DS);				\
+	regs->iasq[0] = spaceid;			\
+	regs->iasq[1] = spaceid;			\
+	regs->iaoq[0] = pc;				\
+	regs->iaoq[1] = pc + 4;                         \
+	regs->sr[2] = LINUX_GATEWAY_SPACE;              \
+	regs->sr[3] = 0xffff;				\
+	regs->sr[4] = spaceid;				\
+	regs->sr[5] = spaceid;				\
+	regs->sr[6] = spaceid;				\
+	regs->sr[7] = spaceid;				\
+	regs->gr[ 0] = USER_PSW;                        \
+	regs->gr[30] = ((new_sp)+63)&~63;		\
+	regs->gr[31] = pc;				\
+							\
+	get_user(regs->gr[26],&sp[0]);			\
+	get_user(regs->gr[25],&sp[-1]); 		\
+	get_user(regs->gr[24],&sp[-2]); 		\
+	get_user(regs->gr[23],&sp[-3]); 		\
+} while(0)
+
+/* The ELF abi wants things done a "wee bit" differently than
+ * som does.  Supporting this behavior here avoids
+ * having our own version of create_elf_tables.
+ *
+ * Oh, and yes, that is not a typo, we are really passing argc in r25
+ * and argv in r24 (rather than r26 and r25).  This is because that's
+ * where __libc_start_main wants them.
+ *
+ * Duplicated from dl-machine.h for the benefit of readers:
+ *
+ *  Our initial stack layout is rather different from everyone else's
+ *  due to the unique PA-RISC ABI.  As far as I know it looks like
+ *  this:
+
+   -----------------------------------  (user startup code creates this frame)
+   |         32 bytes of magic       |
+   |---------------------------------|
+   | 32 bytes argument/sp save area  |
+   |---------------------------------| (bprm->p)
+   |	    ELF auxiliary info	     |
+   |         (up to 28 words)        |
+   |---------------------------------|
+   |		   NULL		     |
+   |---------------------------------|
+   |	   Environment pointers	     |
+   |---------------------------------|
+   |		   NULL		     |
+   |---------------------------------|
+   |        Argument pointers        |
+   |---------------------------------| <- argv
+   |          argc (1 word)          |
+   |---------------------------------| <- bprm->exec (HACK!)
+   |         N bytes of slack        |
+   |---------------------------------|
+   |	filename passed to execve    |
+   |---------------------------------| (mm->env_end)
+   |           env strings           |
+   |---------------------------------| (mm->env_start, mm->arg_end)
+   |           arg strings           |
+   |---------------------------------|
+   | additional faked arg strings if |
+   | we're invoked via binfmt_script |
+   |---------------------------------| (mm->arg_start)
+   stack base is at TASK_SIZE - rlim_max.
+
+on downward growing arches, it looks like this:
+   stack base at TASK_SIZE
+   | filename passed to execve
+   | env strings
+   | arg strings
+   | faked arg strings
+   | slack
+   | ELF
+   | envps
+   | argvs
+   | argc
+
+ *  The pleasant part of this is that if we need to skip arguments we
+ *  can just decrement argc and move argv, because the stack pointer
+ *  is utterly unrelated to the location of the environment and
+ *  argument vectors.
+ *
+ * Note that the S/390 people took the easy way out and hacked their
+ * GCC to make the stack grow downwards.
+ *
+ * Final Note: For entry from syscall, the W (wide) bit of the PSW
+ * is stuffed into the lowest bit of the user sp (%r30), so we fill
+ * it in here from the current->personality
+ */
+
+#ifdef CONFIG_64BIT
+#define USER_WIDE_MODE	(!test_thread_flag(TIF_32BIT))
+#else
+#define USER_WIDE_MODE	0
+#endif
+
+#define start_thread(regs, new_pc, new_sp) do {		\
+	elf_addr_t *sp = (elf_addr_t *)new_sp;		\
+	__u32 spaceid = (__u32)current->mm->context;	\
+	elf_addr_t pc = (elf_addr_t)new_pc | 3;		\
+	elf_caddr_t *argv = (elf_caddr_t *)bprm->exec + 1;	\
+							\
+	set_fs(USER_DS);				\
+	regs->iasq[0] = spaceid;			\
+	regs->iasq[1] = spaceid;			\
+	regs->iaoq[0] = pc;				\
+	regs->iaoq[1] = pc + 4;                         \
+	regs->sr[2] = LINUX_GATEWAY_SPACE;              \
+	regs->sr[3] = 0xffff;				\
+	regs->sr[4] = spaceid;				\
+	regs->sr[5] = spaceid;				\
+	regs->sr[6] = spaceid;				\
+	regs->sr[7] = spaceid;				\
+	regs->gr[ 0] = USER_PSW | (USER_WIDE_MODE ? PSW_W : 0); \
+	regs->fr[ 0] = 0LL;                            	\
+	regs->fr[ 1] = 0LL;                            	\
+	regs->fr[ 2] = 0LL;                            	\
+	regs->fr[ 3] = 0LL;                            	\
+	regs->gr[30] = (((unsigned long)sp + 63) &~ 63) | (USER_WIDE_MODE ? 1 : 0); \
+	regs->gr[31] = pc;				\
+							\
+	get_user(regs->gr[25], (argv - 1));		\
+	regs->gr[24] = (long) argv;			\
+	regs->gr[23] = 0;				\
+} while(0)
+
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern void map_hpux_gateway_page(struct task_struct *tsk, struct mm_struct *mm);
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)	((tsk)->thread.regs.iaoq[0])
+#define KSTK_ESP(tsk)	((tsk)->thread.regs.gr[30])
+
+#define cpu_relax()	barrier()
+
+/* Used as a macro to identify the combined VIPT/PIPT cached
+ * CPUs which require a guarantee of coherency (no inequivalent
+ * aliases with different data, whether clean or not) to operate */
+static inline int parisc_requires_coherency(void)
+{
+#ifdef CONFIG_PA8X00
+	return (boot_cpu_data.cpu_type == mako) ||
+		(boot_cpu_data.cpu_type == mako2);
+#else
+	return 0;
+#endif
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_PARISC_PROCESSOR_H */
diff --git a/arch/parisc/include/asm/psw.h b/arch/parisc/include/asm/psw.h
new file mode 100644
index 0000000..5a3e23c
--- /dev/null
+++ b/arch/parisc/include/asm/psw.h
@@ -0,0 +1,62 @@
+#ifndef _PARISC_PSW_H
+
+
+#define	PSW_I	0x00000001
+#define	PSW_D	0x00000002
+#define	PSW_P	0x00000004
+#define	PSW_Q	0x00000008
+
+#define	PSW_R	0x00000010
+#define	PSW_F	0x00000020
+#define	PSW_G	0x00000040	/* PA1.x only */
+#define PSW_O	0x00000080	/* PA2.0 only */
+
+/* ssm/rsm instructions number PSW_W and PSW_E differently */
+#define PSW_SM_I	PSW_I	/* Enable External Interrupts */
+#define PSW_SM_D	PSW_D
+#define PSW_SM_P	PSW_P
+#define PSW_SM_Q	PSW_Q	/* Enable Interrupt State Collection */
+#define PSW_SM_R	PSW_R	/* Enable Recover Counter Trap */
+#define PSW_SM_W	0x200	/* PA2.0 only : Enable Wide Mode */
+
+#define PSW_SM_QUIET	PSW_SM_R+PSW_SM_Q+PSW_SM_P+PSW_SM_D+PSW_SM_I
+
+#define PSW_CB	0x0000ff00
+
+#define	PSW_M	0x00010000
+#define	PSW_V	0x00020000
+#define	PSW_C	0x00040000
+#define	PSW_B	0x00080000
+
+#define	PSW_X	0x00100000
+#define	PSW_N	0x00200000
+#define	PSW_L	0x00400000
+#define	PSW_H	0x00800000
+
+#define	PSW_T	0x01000000
+#define	PSW_S	0x02000000
+#define	PSW_E	0x04000000
+#define PSW_W	0x08000000	/* PA2.0 only */
+#define PSW_W_BIT       36      /* PA2.0 only */
+
+#define	PSW_Z	0x40000000	/* PA1.x only */
+#define	PSW_Y	0x80000000	/* PA1.x only */
+
+#ifdef CONFIG_64BIT
+#  define PSW_HI_CB 0x000000ff    /* PA2.0 only */
+#endif
+
+#ifdef CONFIG_64BIT
+#  define USER_PSW_HI_MASK	PSW_HI_CB
+#  define WIDE_PSW		PSW_W
+#else 
+#  define WIDE_PSW		0
+#endif
+
+/* Used when setting up for rfi */
+#define KERNEL_PSW    (WIDE_PSW | PSW_C | PSW_Q | PSW_P | PSW_D)
+#define REAL_MODE_PSW (WIDE_PSW | PSW_Q)
+#define USER_PSW_MASK (WIDE_PSW | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
+#define USER_PSW      (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
+
+#endif
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
new file mode 100644
index 0000000..afa5333
--- /dev/null
+++ b/arch/parisc/include/asm/ptrace.h
@@ -0,0 +1,68 @@
+#ifndef _PARISC_PTRACE_H
+#define _PARISC_PTRACE_H
+
+/* written by Philipp Rumpf, Copyright (C) 1999 SuSE GmbH Nuernberg
+** Copyright (C) 2000 Grant Grundler, Hewlett-Packard
+*/
+
+#include <linux/types.h>
+
+/* This struct defines the way the registers are stored on the 
+ * stack during a system call.
+ *
+ * N.B. gdb/strace care about the size and offsets within this
+ * structure. If you change things, you may break object compatibility
+ * for those applications.
+ */
+
+struct pt_regs {
+	unsigned long gr[32];	/* PSW is in gr[0] */
+	__u64 fr[32];
+	unsigned long sr[ 8];
+	unsigned long iasq[2];
+	unsigned long iaoq[2];
+	unsigned long cr27;
+	unsigned long pad0;     /* available for other uses */
+	unsigned long orig_r28;
+	unsigned long ksp;
+	unsigned long kpc;
+	unsigned long sar;	/* CR11 */
+	unsigned long iir;	/* CR19 */
+	unsigned long isr;	/* CR20 */
+	unsigned long ior;	/* CR21 */
+	unsigned long ipsw;	/* CR22 */
+};
+
+/*
+ * The numbers chosen here are somewhat arbitrary but absolutely MUST
+ * not overlap with any of the number assigned in <linux/ptrace.h>.
+ *
+ * These ones are taken from IA-64 on the assumption that theirs are
+ * the most correct (and we also want to support PTRACE_SINGLEBLOCK
+ * since we have taken branch traps too)
+ */
+#define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
+
+#ifdef __KERNEL__
+
+#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+struct task_struct;
+#define arch_has_single_step()	1
+void user_disable_single_step(struct task_struct *task);
+void user_enable_single_step(struct task_struct *task);
+
+#define arch_has_block_step()	1
+void user_enable_block_step(struct task_struct *task);
+
+/* XXX should we use iaoq[1] or iaoq[0] ? */
+#define user_mode(regs)			(((regs)->iaoq[0] & 3) ? 1 : 0)
+#define user_space(regs)		(((regs)->iasq[1] != 0) ? 1 : 0)
+#define instruction_pointer(regs)	((regs)->iaoq[0] & ~3)
+unsigned long profile_pc(struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#endif
+
+#endif
diff --git a/arch/parisc/include/asm/real.h b/arch/parisc/include/asm/real.h
new file mode 100644
index 0000000..82acb25
--- /dev/null
+++ b/arch/parisc/include/asm/real.h
@@ -0,0 +1,5 @@
+#ifndef _PARISC_REAL_H
+#define _PARISC_REAL_H
+
+
+#endif
diff --git a/arch/parisc/include/asm/resource.h b/arch/parisc/include/asm/resource.h
new file mode 100644
index 0000000..8b06343
--- /dev/null
+++ b/arch/parisc/include/asm/resource.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_PARISC_RESOURCE_H
+#define _ASM_PARISC_RESOURCE_H
+
+#define _STK_LIM_MAX	10 * _STK_LIM
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/arch/parisc/include/asm/ropes.h b/arch/parisc/include/asm/ropes.h
new file mode 100644
index 0000000..09f51d5
--- /dev/null
+++ b/arch/parisc/include/asm/ropes.h
@@ -0,0 +1,322 @@
+#ifndef _ASM_PARISC_ROPES_H_
+#define _ASM_PARISC_ROPES_H_
+
+#include <asm/parisc-device.h>
+
+#ifdef CONFIG_64BIT
+/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
+#define ZX1_SUPPORT
+#endif
+
+#ifdef CONFIG_PROC_FS
+/* depends on proc fs support. But costs CPU performance */
+#undef SBA_COLLECT_STATS
+#endif
+
+/*
+** The number of pdir entries to "free" before issuing
+** a read to PCOM register to flush out PCOM writes.
+** Interacts with allocation granularity (ie 4 or 8 entries
+** allocated and free'd/purged at a time might make this
+** less interesting).
+*/
+#define DELAYED_RESOURCE_CNT	16
+
+#define MAX_IOC		2	/* per Ike. Pluto/Astro only have 1. */
+#define ROPES_PER_IOC	8	/* per Ike half or Pluto/Astro */
+
+struct ioc {
+	void __iomem	*ioc_hpa;	/* I/O MMU base address */
+	char		*res_map;	/* resource map, bit == pdir entry */
+	u64		*pdir_base;	/* physical base address */
+	unsigned long	ibase;		/* pdir IOV Space base - shared w/lba_pci */
+	unsigned long	imask;		/* pdir IOV Space mask - shared w/lba_pci */
+#ifdef ZX1_SUPPORT
+	unsigned long	iovp_mask;	/* help convert IOVA to IOVP */
+#endif
+	unsigned long	*res_hint;	/* next avail IOVP - circular search */
+	spinlock_t	res_lock;
+	unsigned int	res_bitshift;	/* from the LEFT! */
+	unsigned int	res_size;	/* size of resource map in bytes */
+#ifdef SBA_HINT_SUPPORT
+/* FIXME : DMA HINTs not used */
+	unsigned long	hint_mask_pdir; /* bits used for DMA hints */
+	unsigned int	hint_shift_pdir;
+#endif
+#if DELAYED_RESOURCE_CNT > 0
+	int		saved_cnt;
+	struct sba_dma_pair {
+			dma_addr_t	iova;
+			size_t		size;
+        } saved[DELAYED_RESOURCE_CNT];
+#endif
+
+#ifdef SBA_COLLECT_STATS
+#define SBA_SEARCH_SAMPLE	0x100
+	unsigned long	avg_search[SBA_SEARCH_SAMPLE];
+	unsigned long	avg_idx;	/* current index into avg_search */
+	unsigned long	used_pages;
+	unsigned long	msingle_calls;
+	unsigned long	msingle_pages;
+	unsigned long	msg_calls;
+	unsigned long	msg_pages;
+	unsigned long	usingle_calls;
+	unsigned long	usingle_pages;
+	unsigned long	usg_calls;
+	unsigned long	usg_pages;
+#endif
+        /* STUFF We don't need in performance path */
+	unsigned int	pdir_size;	/* in bytes, determined by IOV Space size */
+};
+
+struct sba_device {
+	struct sba_device	*next;  /* list of SBA's in system */
+	struct parisc_device	*dev;   /* dev found in bus walk */
+	const char		*name;
+	void __iomem		*sba_hpa; /* base address */
+	spinlock_t		sba_lock;
+	unsigned int		flags;  /* state/functionality enabled */
+	unsigned int		hw_rev;  /* HW revision of chip */
+
+	struct resource		chip_resv; /* MMIO reserved for chip */
+	struct resource		iommu_resv; /* MMIO reserved for iommu */
+
+	unsigned int		num_ioc;  /* number of on-board IOC's */
+	struct ioc		ioc[MAX_IOC];
+};
+
+#define ASTRO_RUNWAY_PORT	0x582
+#define IKE_MERCED_PORT		0x803
+#define REO_MERCED_PORT		0x804
+#define REOG_MERCED_PORT	0x805
+#define PLUTO_MCKINLEY_PORT	0x880
+
+static inline int IS_ASTRO(struct parisc_device *d) {
+	return d->id.hversion == ASTRO_RUNWAY_PORT;
+}
+
+static inline int IS_IKE(struct parisc_device *d) {
+	return d->id.hversion == IKE_MERCED_PORT;
+}
+
+static inline int IS_PLUTO(struct parisc_device *d) {
+	return d->id.hversion == PLUTO_MCKINLEY_PORT;
+}
+
+#define PLUTO_IOVA_BASE	(1UL*1024*1024*1024)	/* 1GB */
+#define PLUTO_IOVA_SIZE	(1UL*1024*1024*1024)	/* 1GB */
+#define PLUTO_GART_SIZE	(PLUTO_IOVA_SIZE / 2)
+
+#define SBA_PDIR_VALID_BIT	0x8000000000000000ULL
+
+#define SBA_AGPGART_COOKIE	0x0000badbadc0ffeeULL
+
+#define SBA_FUNC_ID	0x0000	/* function id */
+#define SBA_FCLASS	0x0008	/* function class, bist, header, rev... */
+
+#define SBA_FUNC_SIZE 4096   /* SBA configuration function reg set */
+
+#define ASTRO_IOC_OFFSET	(32 * SBA_FUNC_SIZE)
+#define PLUTO_IOC_OFFSET	(1 * SBA_FUNC_SIZE)
+/* Ike's IOC's occupy functions 2 and 3 */
+#define IKE_IOC_OFFSET(p)	((p+2) * SBA_FUNC_SIZE)
+
+#define IOC_CTRL          0x8	/* IOC_CTRL offset */
+#define IOC_CTRL_TC       (1 << 0) /* TOC Enable */
+#define IOC_CTRL_CE       (1 << 1) /* Coalesce Enable */
+#define IOC_CTRL_DE       (1 << 2) /* Dillon Enable */
+#define IOC_CTRL_RM       (1 << 8) /* Real Mode */
+#define IOC_CTRL_NC       (1 << 9) /* Non Coherent Mode */
+#define IOC_CTRL_D4       (1 << 11) /* Disable 4-byte coalescing */
+#define IOC_CTRL_DD       (1 << 13) /* Disable distr. LMMIO range coalescing */
+
+/*
+** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
+** Firmware programs this stuff. Don't touch it.
+*/
+#define LMMIO_DIRECT0_BASE  0x300
+#define LMMIO_DIRECT0_MASK  0x308
+#define LMMIO_DIRECT0_ROUTE 0x310
+
+#define LMMIO_DIST_BASE  0x360
+#define LMMIO_DIST_MASK  0x368
+#define LMMIO_DIST_ROUTE 0x370
+
+#define IOS_DIST_BASE	0x390
+#define IOS_DIST_MASK	0x398
+#define IOS_DIST_ROUTE	0x3A0
+
+#define IOS_DIRECT_BASE	0x3C0
+#define IOS_DIRECT_MASK	0x3C8
+#define IOS_DIRECT_ROUTE 0x3D0
+
+/*
+** Offsets into I/O TLB (Function 2 and 3 on Ike)
+*/
+#define ROPE0_CTL	0x200  /* "regbus pci0" */
+#define ROPE1_CTL	0x208
+#define ROPE2_CTL	0x210
+#define ROPE3_CTL	0x218
+#define ROPE4_CTL	0x220
+#define ROPE5_CTL	0x228
+#define ROPE6_CTL	0x230
+#define ROPE7_CTL	0x238
+
+#define IOC_ROPE0_CFG	0x500	/* pluto only */
+#define   IOC_ROPE_AO	  0x10	/* Allow "Relaxed Ordering" */
+
+#define HF_ENABLE	0x40
+
+#define IOC_IBASE	0x300	/* IO TLB */
+#define IOC_IMASK	0x308
+#define IOC_PCOM	0x310
+#define IOC_TCNFG	0x318
+#define IOC_PDIR_BASE	0x320
+
+/*
+** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
+** It's safer (avoid memory corruption) to keep DMA page mappings
+** equivalently sized to VM PAGE_SIZE.
+**
+** We really can't avoid generating a new mapping for each
+** page since the Virtual Coherence Index has to be generated
+** and updated for each page.
+**
+** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
+*/
+#define IOVP_SIZE	PAGE_SIZE
+#define IOVP_SHIFT	PAGE_SHIFT
+#define IOVP_MASK	PAGE_MASK
+
+#define SBA_PERF_CFG	0x708	/* Performance Counter stuff */
+#define SBA_PERF_MASK1	0x718
+#define SBA_PERF_MASK2	0x730
+
+/*
+** Offsets into PCI Performance Counters (functions 12 and 13)
+** Controlled by PERF registers in function 2 & 3 respectively.
+*/
+#define SBA_PERF_CNT1	0x200
+#define SBA_PERF_CNT2	0x208
+#define SBA_PERF_CNT3	0x210
+
+/*
+** lba_device: Per instance Elroy data structure
+*/
+struct lba_device {
+	struct pci_hba_data	hba;
+
+	spinlock_t		lba_lock;
+	void			*iosapic_obj;
+
+#ifdef CONFIG_64BIT
+	void __iomem		*iop_base;	/* PA_VIEW - for IO port accessor funcs */
+#endif
+
+	int			flags;		/* state/functionality enabled */
+	int			hw_rev;		/* HW revision of chip */
+};
+
+#define ELROY_HVERS		0x782
+#define MERCURY_HVERS		0x783
+#define QUICKSILVER_HVERS	0x784
+
+static inline int IS_ELROY(struct parisc_device *d) {
+	return (d->id.hversion == ELROY_HVERS);
+}
+
+static inline int IS_MERCURY(struct parisc_device *d) {
+	return (d->id.hversion == MERCURY_HVERS);
+}
+
+static inline int IS_QUICKSILVER(struct parisc_device *d) {
+	return (d->id.hversion == QUICKSILVER_HVERS);
+}
+
+static inline int agp_mode_mercury(void __iomem *hpa) {
+	u64 bus_mode;
+
+	bus_mode = readl(hpa + 0x0620);
+	if (bus_mode & 1)
+		return 1;
+
+	return 0;
+}
+
+/*
+** I/O SAPIC init function
+** Caller knows where an I/O SAPIC is. LBA has an integrated I/O SAPIC.
+** Call setup as part of per instance initialization.
+** (ie *not* init_module() function unless only one is present.)
+** fixup_irq is to initialize PCI IRQ line support and
+** virtualize pcidev->irq value. To be called by pci_fixup_bus().
+*/
+extern void *iosapic_register(unsigned long hpa);
+extern int iosapic_fixup_irq(void *obj, struct pci_dev *pcidev);
+
+#define LBA_FUNC_ID	0x0000	/* function id */
+#define LBA_FCLASS	0x0008	/* function class, bist, header, rev... */
+#define LBA_CAPABLE	0x0030	/* capabilities register */
+
+#define LBA_PCI_CFG_ADDR	0x0040	/* poke CFG address here */
+#define LBA_PCI_CFG_DATA	0x0048	/* read or write data here */
+
+#define LBA_PMC_MTLT	0x0050	/* Firmware sets this - read only. */
+#define LBA_FW_SCRATCH	0x0058	/* Firmware writes the PCI bus number here. */
+#define LBA_ERROR_ADDR	0x0070	/* On error, address gets logged here */
+
+#define LBA_ARB_MASK	0x0080	/* bit 0 enable arbitration. PAT/PDC enables */
+#define LBA_ARB_PRI	0x0088	/* firmware sets this. */
+#define LBA_ARB_MODE	0x0090	/* firmware sets this. */
+#define LBA_ARB_MTLT	0x0098	/* firmware sets this. */
+
+#define LBA_MOD_ID	0x0100	/* Module ID. PDC_PAT_CELL reports 4 */
+
+#define LBA_STAT_CTL	0x0108	/* Status & Control */
+#define   LBA_BUS_RESET		0x01	/*  Deassert PCI Bus Reset Signal */
+#define   CLEAR_ERRLOG		0x10	/*  "Clear Error Log" cmd */
+#define   CLEAR_ERRLOG_ENABLE	0x20	/*  "Clear Error Log" Enable */
+#define   HF_ENABLE	0x40	/*    enable HF mode (default is -1 mode) */
+
+#define LBA_LMMIO_BASE	0x0200	/* < 4GB I/O address range */
+#define LBA_LMMIO_MASK	0x0208
+
+#define LBA_GMMIO_BASE	0x0210	/* > 4GB I/O address range */
+#define LBA_GMMIO_MASK	0x0218
+
+#define LBA_WLMMIO_BASE	0x0220	/* All < 4GB ranges under the same *SBA* */
+#define LBA_WLMMIO_MASK	0x0228
+
+#define LBA_WGMMIO_BASE	0x0230	/* All > 4GB ranges under the same *SBA* */
+#define LBA_WGMMIO_MASK	0x0238
+
+#define LBA_IOS_BASE	0x0240	/* I/O port space for this LBA */
+#define LBA_IOS_MASK	0x0248
+
+#define LBA_ELMMIO_BASE	0x0250	/* Extra LMMIO range */
+#define LBA_ELMMIO_MASK	0x0258
+
+#define LBA_EIOS_BASE	0x0260	/* Extra I/O port space */
+#define LBA_EIOS_MASK	0x0268
+
+#define LBA_GLOBAL_MASK	0x0270	/* Mercury only: Global Address Mask */
+#define LBA_DMA_CTL	0x0278	/* firmware sets this */
+
+#define LBA_IBASE	0x0300	/* SBA DMA support */
+#define LBA_IMASK	0x0308
+
+/* FIXME: ignore DMA Hint stuff until we can measure performance */
+#define LBA_HINT_CFG	0x0310
+#define LBA_HINT_BASE	0x0380	/* 14 registers at every 8 bytes. */
+
+#define LBA_BUS_MODE	0x0620
+
+/* ERROR regs are needed for config cycle kluges */
+#define LBA_ERROR_CONFIG 0x0680
+#define     LBA_SMART_MODE 0x20
+#define LBA_ERROR_STATUS 0x0688
+#define LBA_ROPE_CTL     0x06A0
+
+#define LBA_IOSAPIC_BASE	0x800 /* Offset of IRQ logic */
+
+#endif /*_ASM_PARISC_ROPES_H_*/
diff --git a/arch/parisc/include/asm/rt_sigframe.h b/arch/parisc/include/asm/rt_sigframe.h
new file mode 100644
index 0000000..f0dd3b3
--- /dev/null
+++ b/arch/parisc/include/asm/rt_sigframe.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_PARISC_RT_SIGFRAME_H
+#define _ASM_PARISC_RT_SIGFRAME_H
+
+#define SIGRETURN_TRAMP 4
+#define SIGRESTARTBLOCK_TRAMP 5 
+#define TRAMP_SIZE (SIGRETURN_TRAMP + SIGRESTARTBLOCK_TRAMP)
+
+struct rt_sigframe {
+	/* XXX: Must match trampoline size in arch/parisc/kernel/signal.c 
+	        Secondary to that it must protect the ERESTART_RESTARTBLOCK
+		trampoline we left on the stack (we were bad and didn't 
+		change sp so we could run really fast.) */
+	unsigned int tramp[TRAMP_SIZE];
+	struct siginfo info;
+	struct ucontext uc;
+};
+
+#define	SIGFRAME		128
+#define FUNCTIONCALLFRAME	96
+#define PARISC_RT_SIGFRAME_SIZE					\
+	(((sizeof(struct rt_sigframe) + FUNCTIONCALLFRAME) + SIGFRAME) & -SIGFRAME)
+
+#endif
diff --git a/arch/parisc/include/asm/rtc.h b/arch/parisc/include/asm/rtc.h
new file mode 100644
index 0000000..099d641
--- /dev/null
+++ b/arch/parisc/include/asm/rtc.h
@@ -0,0 +1,131 @@
+/* 
+ * include/asm-parisc/rtc.h
+ *
+ * Copyright 2002 Randolph CHung <tausq@debian.org>
+ *
+ * Based on: include/asm-ppc/rtc.h and the genrtc driver in the
+ * 2.4 parisc linux tree
+ */
+
+#ifndef __ASM_RTC_H__
+#define __ASM_RTC_H__
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+
+#include <asm/pdc.h>
+
+#define SECS_PER_HOUR   (60 * 60)
+#define SECS_PER_DAY    (SECS_PER_HOUR * 24)
+
+
+#define RTC_PIE 0x40		/* periodic interrupt enable */
+#define RTC_AIE 0x20		/* alarm interrupt enable */
+#define RTC_UIE 0x10		/* update-finished interrupt enable */
+
+#define RTC_BATT_BAD 0x100	/* battery bad */
+
+/* some dummy definitions */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+# define __isleap(year) \
+  ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+
+/* How many days come before each month (0-12).  */
+static const unsigned short int __mon_yday[2][13] =
+{
+	/* Normal years.  */
+	{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
+	/* Leap years.  */
+	{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
+};
+
+static inline unsigned int get_rtc_time(struct rtc_time *wtime)
+{
+	struct pdc_tod tod_data;
+	long int days, rem, y;
+	const unsigned short int *ip;
+
+	memset(wtime, 0, sizeof(*wtime));
+	if (pdc_tod_read(&tod_data) < 0)
+		return RTC_24H | RTC_BATT_BAD;
+
+	// most of the remainder of this function is:
+//	Copyright (C) 1991, 1993, 1997, 1998 Free Software Foundation, Inc.
+//	This was originally a part of the GNU C Library.
+//      It is distributed under the GPL, and was swiped from offtime.c
+
+
+	days = tod_data.tod_sec / SECS_PER_DAY;
+	rem = tod_data.tod_sec % SECS_PER_DAY;
+
+	wtime->tm_hour = rem / SECS_PER_HOUR;
+	rem %= SECS_PER_HOUR;
+	wtime->tm_min = rem / 60;
+	wtime->tm_sec = rem % 60;
+
+	y = 1970;
+
+#define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
+#define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
+
+	while (days < 0 || days >= (__isleap (y) ? 366 : 365))
+	{
+		/* Guess a corrected year, assuming 365 days per year.  */
+		long int yg = y + days / 365 - (days % 365 < 0);
+
+		/* Adjust DAYS and Y to match the guessed year.  */
+		days -= ((yg - y) * 365
+			 + LEAPS_THRU_END_OF (yg - 1)
+			 - LEAPS_THRU_END_OF (y - 1));
+		y = yg;
+	}
+	wtime->tm_year = y - 1900;
+
+	ip = __mon_yday[__isleap(y)];
+	for (y = 11; days < (long int) ip[y]; --y)
+		continue;
+	days -= ip[y];
+	wtime->tm_mon = y;
+	wtime->tm_mday = days + 1;
+
+	return RTC_24H;
+}
+
+static int set_rtc_time(struct rtc_time *wtime)
+{
+	u_int32_t secs;
+
+	secs = mktime(wtime->tm_year + 1900, wtime->tm_mon + 1, wtime->tm_mday, 
+		      wtime->tm_hour, wtime->tm_min, wtime->tm_sec);
+
+	if(pdc_tod_set(secs, 0) < 0)
+		return -1;
+	else
+		return 0;
+
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+	struct rtc_time h;
+
+	get_rtc_time(&h);
+	return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_RTC_H__ */
diff --git a/arch/parisc/include/asm/runway.h b/arch/parisc/include/asm/runway.h
new file mode 100644
index 0000000..5bea02d
--- /dev/null
+++ b/arch/parisc/include/asm/runway.h
@@ -0,0 +1,12 @@
+#ifndef ASM_PARISC_RUNWAY_H
+#define ASM_PARISC_RUNWAY_H
+#ifdef __KERNEL__
+
+/* declared in arch/parisc/kernel/setup.c */
+extern struct proc_dir_entry * proc_runway_root;
+
+#define RUNWAY_STATUS	0x10
+#define RUNWAY_DEBUG	0x40
+
+#endif /* __KERNEL__ */
+#endif /* ASM_PARISC_RUNWAY_H */
diff --git a/arch/parisc/include/asm/scatterlist.h b/arch/parisc/include/asm/scatterlist.h
new file mode 100644
index 0000000..62269b3
--- /dev/null
+++ b/arch/parisc/include/asm/scatterlist.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_PARISC_SCATTERLIST_H
+#define _ASM_PARISC_SCATTERLIST_H
+
+#include <asm/page.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+
+	unsigned int length;
+
+	/* an IOVA can be 64-bits on some PA-Risc platforms. */
+	dma_addr_t iova;	/* I/O Virtual Address */
+	__u32      iova_length; /* bytes mapped */
+};
+
+#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg))
+#define sg_dma_address(sg) ((sg)->iova)
+#define sg_dma_len(sg)     ((sg)->iova_length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#endif /* _ASM_PARISC_SCATTERLIST_H */
diff --git a/arch/parisc/include/asm/sections.h b/arch/parisc/include/asm/sections.h
new file mode 100644
index 0000000..9d13c35
--- /dev/null
+++ b/arch/parisc/include/asm/sections.h
@@ -0,0 +1,12 @@
+#ifndef _PARISC_SECTIONS_H
+#define _PARISC_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#ifdef CONFIG_64BIT
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+#endif
+
+#endif
diff --git a/arch/parisc/include/asm/segment.h b/arch/parisc/include/asm/segment.h
new file mode 100644
index 0000000..26794dd
--- /dev/null
+++ b/arch/parisc/include/asm/segment.h
@@ -0,0 +1,6 @@
+#ifndef __PARISC_SEGMENT_H
+#define __PARISC_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif
diff --git a/arch/parisc/include/asm/sembuf.h b/arch/parisc/include/asm/sembuf.h
new file mode 100644
index 0000000..1e59ffd
--- /dev/null
+++ b/arch/parisc/include/asm/sembuf.h
@@ -0,0 +1,29 @@
+#ifndef _PARISC_SEMBUF_H
+#define _PARISC_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for parisc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+#ifndef CONFIG_64BIT
+	unsigned int	__pad1;
+#endif
+	__kernel_time_t	sem_otime;		/* last semop time */
+#ifndef CONFIG_64BIT
+	unsigned int	__pad2;
+#endif
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned int	sem_nsems;		/* no. of semaphores in array */
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _PARISC_SEMBUF_H */
diff --git a/arch/parisc/include/asm/serial.h b/arch/parisc/include/asm/serial.h
new file mode 100644
index 0000000..d7e3cc6
--- /dev/null
+++ b/arch/parisc/include/asm/serial.h
@@ -0,0 +1,10 @@
+/*
+ * include/asm-parisc/serial.h
+ */
+
+/*
+ * This is used for 16550-compatible UARTs
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#define SERIAL_PORT_DFNS
diff --git a/arch/parisc/include/asm/setup.h b/arch/parisc/include/asm/setup.h
new file mode 100644
index 0000000..7da2e5b
--- /dev/null
+++ b/arch/parisc/include/asm/setup.h
@@ -0,0 +1,6 @@
+#ifndef _PARISC_SETUP_H
+#define _PARISC_SETUP_H
+
+#define COMMAND_LINE_SIZE	1024
+
+#endif /* _PARISC_SETUP_H */
diff --git a/arch/parisc/include/asm/shmbuf.h b/arch/parisc/include/asm/shmbuf.h
new file mode 100644
index 0000000..0a3eada
--- /dev/null
+++ b/arch/parisc/include/asm/shmbuf.h
@@ -0,0 +1,58 @@
+#ifndef _PARISC_SHMBUF_H
+#define _PARISC_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for parisc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+#ifndef CONFIG_64BIT
+	unsigned int		__pad1;
+#endif
+	__kernel_time_t		shm_atime;	/* last attach time */
+#ifndef CONFIG_64BIT
+	unsigned int		__pad2;
+#endif
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#ifndef CONFIG_64BIT
+	unsigned int		__pad3;
+#endif
+	__kernel_time_t		shm_ctime;	/* last change time */
+#ifndef CONFIG_64BIT
+	unsigned int		__pad4;
+#endif
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned int		shm_nattch;	/* no. of current attaches */
+	unsigned int		__unused1;
+	unsigned int		__unused2;
+};
+
+#ifdef CONFIG_64BIT
+/* The 'unsigned int' (formerly 'unsigned long') data types below will
+ * ensure that a 32-bit app calling shmctl(*,IPC_INFO,*) will work on
+ * a wide kernel, but if some of these values are meant to contain pointers
+ * they may need to be 'long long' instead. -PB XXX FIXME
+ */
+#endif
+struct shminfo64 {
+	unsigned int	shmmax;
+	unsigned int	shmmin;
+	unsigned int	shmmni;
+	unsigned int	shmseg;
+	unsigned int	shmall;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+	unsigned int	__unused3;
+	unsigned int	__unused4;
+};
+
+#endif /* _PARISC_SHMBUF_H */
diff --git a/arch/parisc/include/asm/shmparam.h b/arch/parisc/include/asm/shmparam.h
new file mode 100644
index 0000000..628ddc2
--- /dev/null
+++ b/arch/parisc/include/asm/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef _ASMPARISC_SHMPARAM_H
+#define _ASMPARISC_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA 	1
+
+#define SHMLBA 0x00400000   /* attach addr needs to be 4 Mb aligned */
+
+#endif /* _ASMPARISC_SHMPARAM_H */
diff --git a/arch/parisc/include/asm/sigcontext.h b/arch/parisc/include/asm/sigcontext.h
new file mode 100644
index 0000000..27ef31b
--- /dev/null
+++ b/arch/parisc/include/asm/sigcontext.h
@@ -0,0 +1,20 @@
+#ifndef _ASMPARISC_SIGCONTEXT_H
+#define _ASMPARISC_SIGCONTEXT_H
+
+#define PARISC_SC_FLAG_ONSTACK 1<<0
+#define PARISC_SC_FLAG_IN_SYSCALL 1<<1
+
+/* We will add more stuff here as it becomes necessary, until we know
+   it works. */
+struct sigcontext {
+	unsigned long sc_flags;
+
+	unsigned long sc_gr[32]; /* PSW in sc_gr[0] */
+	unsigned long long sc_fr[32]; /* FIXME, do we need other state info? */
+	unsigned long sc_iasq[2];
+	unsigned long sc_iaoq[2];
+	unsigned long sc_sar; /* cr11 */
+};
+
+
+#endif
diff --git a/arch/parisc/include/asm/siginfo.h b/arch/parisc/include/asm/siginfo.h
new file mode 100644
index 0000000..d703472
--- /dev/null
+++ b/arch/parisc/include/asm/siginfo.h
@@ -0,0 +1,9 @@
+#ifndef _PARISC_SIGINFO_H
+#define _PARISC_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+#endif
diff --git a/arch/parisc/include/asm/signal.h b/arch/parisc/include/asm/signal.h
new file mode 100644
index 0000000..c203563
--- /dev/null
+++ b/arch/parisc/include/asm/signal.h
@@ -0,0 +1,153 @@
+#ifndef _ASM_PARISC_SIGNAL_H
+#define _ASM_PARISC_SIGNAL_H
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGEMT		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGBUS		10
+#define SIGSEGV		11
+#define SIGSYS		12 /* Linux doesn't use this */
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGUSR1		16
+#define SIGUSR2		17
+#define SIGCHLD		18
+#define SIGPWR		19
+#define SIGVTALRM	20
+#define SIGPROF		21
+#define SIGIO		22
+#define SIGPOLL		SIGIO
+#define SIGWINCH	23
+#define SIGSTOP		24
+#define SIGTSTP		25
+#define SIGCONT		26
+#define SIGTTIN		27
+#define SIGTTOU		28
+#define SIGURG		29
+#define SIGLOST		30 /* Linux doesn't use this either */
+#define	SIGUNUSED	31
+#define SIGRESERVE	SIGUNUSED
+
+#define SIGXCPU		33
+#define SIGXFSZ		34
+#define SIGSTKFLT	36
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	37
+#define SIGRTMAX	_NSIG /* it's 44 under HP/UX */
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_ONSTACK	0x00000001
+#define SA_RESETHAND	0x00000004
+#define SA_NOCLDSTOP	0x00000008
+#define SA_SIGINFO	0x00000010
+#define SA_NODEFER	0x00000020
+#define SA_RESTART	0x00000040
+#define SA_NOCLDWAIT	0x00000080
+#define _SA_SIGGFAULT	0x00000100 /* HPUX */
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000 /* obsolete -- ignored */
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifdef __KERNEL__
+
+#define _NSIG		64
+/* bits-per-word, where word apparently means 'long' not 'int' */
+#define _NSIG_BPW	BITS_PER_LONG
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+# ifndef __ASSEMBLY__
+
+#  include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+/* Type of a signal handler.  */
+#ifdef CONFIG_64BIT
+/* function pointers on 64-bit parisc are pointers to little structs and the
+ * compiler doesn't support code which changes or tests the address of
+ * the function in the little struct.  This is really ugly -PB
+ */
+typedef char __user *__sighandler_t;
+#else
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+#endif
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	/* next_signal() assumes this is a long - no choice */
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#include <asm/sigcontext.h>
+
+#endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY */
+#endif /* _ASM_PARISC_SIGNAL_H */
diff --git a/arch/parisc/include/asm/smp.h b/arch/parisc/include/asm/smp.h
new file mode 100644
index 0000000..398cdba
--- /dev/null
+++ b/arch/parisc/include/asm/smp.h
@@ -0,0 +1,68 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+
+#if defined(CONFIG_SMP)
+
+/* Page Zero Location PDC will look for the address to branch to when we poke
+** slave CPUs still in "Icache loop".
+*/
+#define PDC_OS_BOOT_RENDEZVOUS     0x10
+#define PDC_OS_BOOT_RENDEZVOUS_HI  0x28
+
+#ifndef ASSEMBLY
+#include <linux/bitops.h>
+#include <linux/threads.h>	/* for NR_CPUS */
+#include <linux/cpumask.h>
+typedef unsigned long address_t;
+
+extern cpumask_t cpu_online_map;
+
+
+/*
+ *	Private routines/data
+ *
+ *	physical and logical are equivalent until we support CPU hotplug.
+ */
+#define cpu_number_map(cpu)	(cpu)
+#define cpu_logical_map(cpu)	(cpu)
+
+extern void smp_send_reschedule(int cpu);
+extern void smp_send_all_nop(void);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#endif /* !ASSEMBLY */
+
+/*
+ *	This magic constant controls our willingness to transfer
+ *      a process across CPUs. Such a transfer incurs cache and tlb
+ *      misses. The current value is inherited from i386. Still needs
+ *      to be tuned for parisc.
+ */
+ 
+#define PROC_CHANGE_PENALTY	15		/* Schedule penalty */
+
+extern unsigned long cpu_present_mask;
+
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
+
+#else /* CONFIG_SMP */
+
+static inline void smp_send_all_nop(void) { return; }
+
+#endif
+
+#define NO_PROC_ID		0xFF		/* No processor magic marker */
+#define ANY_PROC_ID		0xFF		/* Any processor magic marker */
+static inline int __cpu_disable (void) {
+  return 0;
+}
+static inline void __cpu_die (unsigned int cpu) {
+  while(1)
+    ;
+}
+extern int __cpu_up (unsigned int cpu);
+
+#endif /*  __ASM_SMP_H */
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
new file mode 100644
index 0000000..fba402c
--- /dev/null
+++ b/arch/parisc/include/asm/socket.h
@@ -0,0 +1,62 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001
+#define SO_REUSEADDR	0x0004
+#define SO_KEEPALIVE	0x0008
+#define SO_DONTROUTE	0x0010
+#define SO_BROADCAST	0x0020
+#define SO_LINGER	0x0080
+#define SO_OOBINLINE	0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+#define SO_SNDBUF	0x1001
+#define SO_RCVBUF	0x1002
+#define SO_SNDBUFFORCE	0x100a
+#define SO_RCVBUFFORCE	0x100b
+#define SO_SNDLOWAT	0x1003
+#define SO_RCVLOWAT	0x1004
+#define SO_SNDTIMEO	0x1005
+#define SO_RCVTIMEO	0x1006
+#define SO_ERROR	0x1007
+#define SO_TYPE		0x1008
+#define SO_PEERNAME	0x2000
+
+#define SO_NO_CHECK	0x400b
+#define SO_PRIORITY	0x400c
+#define SO_BSDCOMPAT	0x400e
+#define SO_PASSCRED	0x4010
+#define SO_PEERCRED	0x4011
+#define SO_TIMESTAMP	0x4012
+#define SCM_TIMESTAMP	SO_TIMESTAMP
+#define SO_TIMESTAMPNS	0x4013
+#define SCM_TIMESTAMPNS	SO_TIMESTAMPNS
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		0x4016
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	0x4017
+#define SO_SECURITY_ENCRYPTION_NETWORK		0x4018
+
+#define SO_BINDTODEVICE	0x4019
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        0x401a
+#define SO_DETACH_FILTER        0x401b
+
+#define SO_ACCEPTCONN		0x401c
+
+#define SO_PEERSEC		0x401d
+#define SO_PASSSEC		0x401e
+
+#define SO_MARK			0x401f
+
+/* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
+ * have to define SOCK_NONBLOCK to a different value here.
+ */
+#define SOCK_NONBLOCK   0x40000000
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/parisc/include/asm/sockios.h b/arch/parisc/include/asm/sockios.h
new file mode 100644
index 0000000..dabfbc7
--- /dev/null
+++ b/arch/parisc/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ARCH_PARISC_SOCKIOS__
+#define __ARCH_PARISC_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif
diff --git a/arch/parisc/include/asm/spinlock.h b/arch/parisc/include/asm/spinlock.h
new file mode 100644
index 0000000..f3d2090
--- /dev/null
+++ b/arch/parisc/include/asm/spinlock.h
@@ -0,0 +1,194 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/spinlock_types.h>
+
+static inline int __raw_spin_is_locked(raw_spinlock_t *x)
+{
+	volatile unsigned int *a = __ldcw_align(x);
+	return *a == 0;
+}
+
+#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0)
+#define __raw_spin_unlock_wait(x) \
+		do { cpu_relax(); } while (__raw_spin_is_locked(x))
+
+static inline void __raw_spin_lock_flags(raw_spinlock_t *x,
+					 unsigned long flags)
+{
+	volatile unsigned int *a;
+
+	mb();
+	a = __ldcw_align(x);
+	while (__ldcw(a) == 0)
+		while (*a == 0)
+			if (flags & PSW_SM_I) {
+				local_irq_enable();
+				cpu_relax();
+				local_irq_disable();
+			} else
+				cpu_relax();
+	mb();
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *x)
+{
+	volatile unsigned int *a;
+	mb();
+	a = __ldcw_align(x);
+	*a = 1;
+	mb();
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *x)
+{
+	volatile unsigned int *a;
+	int ret;
+
+	mb();
+	a = __ldcw_align(x);
+        ret = __ldcw(a) != 0;
+	mb();
+
+	return ret;
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ * Linux rwlocks are unfair to writers; they can be starved for an indefinite
+ * time by readers.  With care, they can also be taken in interrupt context.
+ *
+ * In the PA-RISC implementation, we have a spinlock and a counter.
+ * Readers use the lock to serialise their access to the counter (which
+ * records how many readers currently hold the lock).
+ * Writers hold the spinlock, preventing any readers or other writers from
+ * grabbing the rwlock.
+ */
+
+/* Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to grab the same read lock */
+static  __inline__ void __raw_read_lock(raw_rwlock_t *rw)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+	__raw_spin_lock_flags(&rw->lock, flags);
+	rw->counter++;
+	__raw_spin_unlock(&rw->lock);
+	local_irq_restore(flags);
+}
+
+/* Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to grab the same read lock */
+static  __inline__ void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+	__raw_spin_lock_flags(&rw->lock, flags);
+	rw->counter--;
+	__raw_spin_unlock(&rw->lock);
+	local_irq_restore(flags);
+}
+
+/* Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to grab the same read lock */
+static __inline__ int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	unsigned long flags;
+ retry:
+	local_irq_save(flags);
+	if (__raw_spin_trylock(&rw->lock)) {
+		rw->counter++;
+		__raw_spin_unlock(&rw->lock);
+		local_irq_restore(flags);
+		return 1;
+	}
+
+	local_irq_restore(flags);
+	/* If write-locked, we fail to acquire the lock */
+	if (rw->counter < 0)
+		return 0;
+
+	/* Wait until we have a realistic chance at the lock */
+	while (__raw_spin_is_locked(&rw->lock) && rw->counter >= 0)
+		cpu_relax();
+
+	goto retry;
+}
+
+/* Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to read_trylock() this lock */
+static __inline__ void __raw_write_lock(raw_rwlock_t *rw)
+{
+	unsigned long flags;
+retry:
+	local_irq_save(flags);
+	__raw_spin_lock_flags(&rw->lock, flags);
+
+	if (rw->counter != 0) {
+		__raw_spin_unlock(&rw->lock);
+		local_irq_restore(flags);
+
+		while (rw->counter != 0)
+			cpu_relax();
+
+		goto retry;
+	}
+
+	rw->counter = -1; /* mark as write-locked */
+	mb();
+	local_irq_restore(flags);
+}
+
+static __inline__ void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	rw->counter = 0;
+	__raw_spin_unlock(&rw->lock);
+}
+
+/* Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to read_trylock() this lock */
+static __inline__ int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	unsigned long flags;
+	int result = 0;
+
+	local_irq_save(flags);
+	if (__raw_spin_trylock(&rw->lock)) {
+		if (rw->counter == 0) {
+			rw->counter = -1;
+			result = 1;
+		} else {
+			/* Read-locked.  Oh well. */
+			__raw_spin_unlock(&rw->lock);
+		}
+	}
+	local_irq_restore(flags);
+
+	return result;
+}
+
+/*
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static __inline__ int __raw_read_can_lock(raw_rwlock_t *rw)
+{
+	return rw->counter >= 0;
+}
+
+/*
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static __inline__ int __raw_write_can_lock(raw_rwlock_t *rw)
+{
+	return !rw->counter;
+}
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/parisc/include/asm/spinlock_types.h b/arch/parisc/include/asm/spinlock_types.h
new file mode 100644
index 0000000..3f72f47
--- /dev/null
+++ b/arch/parisc/include/asm/spinlock_types.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SPINLOCK_TYPES_H
+#define __ASM_SPINLOCK_TYPES_H
+
+typedef struct {
+#ifdef CONFIG_PA20
+	volatile unsigned int slock;
+# define __RAW_SPIN_LOCK_UNLOCKED { 1 }
+#else
+	volatile unsigned int lock[4];
+# define __RAW_SPIN_LOCK_UNLOCKED	{ { 1, 1, 1, 1 } }
+#endif
+} raw_spinlock_t;
+
+typedef struct {
+	raw_spinlock_t lock;
+	volatile int counter;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ __RAW_SPIN_LOCK_UNLOCKED, 0 }
+
+#endif
diff --git a/arch/parisc/include/asm/stat.h b/arch/parisc/include/asm/stat.h
new file mode 100644
index 0000000..9d5fbbc
--- /dev/null
+++ b/arch/parisc/include/asm/stat.h
@@ -0,0 +1,100 @@
+#ifndef _PARISC_STAT_H
+#define _PARISC_STAT_H
+
+#include <linux/types.h>
+
+struct stat {
+	unsigned int	st_dev;		/* dev_t is 32 bits on parisc */
+	ino_t		st_ino;		/* 32 bits */
+	mode_t		st_mode;	/* 16 bits */
+	nlink_t		st_nlink;	/* 16 bits */
+	unsigned short	st_reserved1;	/* old st_uid */
+	unsigned short	st_reserved2;	/* old st_gid */
+	unsigned int	st_rdev;
+	off_t		st_size;
+	time_t		st_atime;
+	unsigned int	st_atime_nsec;
+	time_t		st_mtime;
+	unsigned int	st_mtime_nsec;
+	time_t		st_ctime;
+	unsigned int	st_ctime_nsec;
+	int		st_blksize;
+	int		st_blocks;
+	unsigned int	__unused1;	/* ACL stuff */
+	unsigned int	__unused2;	/* network */
+	ino_t		__unused3;	/* network */
+	unsigned int	__unused4;	/* cnodes */
+	unsigned short	__unused5;	/* netsite */
+	short		st_fstype;
+	unsigned int	st_realdev;
+	unsigned short	st_basemode;
+	unsigned short	st_spareshort;
+	uid_t		st_uid;
+	gid_t		st_gid;
+	unsigned int	st_spare4[3];
+};
+
+#define STAT_HAVE_NSEC
+
+typedef __kernel_off64_t	off64_t;
+
+struct hpux_stat64 {
+	unsigned int	st_dev;		/* dev_t is 32 bits on parisc */
+	ino_t           st_ino;         /* 32 bits */
+	mode_t		st_mode;	/* 16 bits */
+	nlink_t		st_nlink;	/* 16 bits */
+	unsigned short	st_reserved1;	/* old st_uid */
+	unsigned short	st_reserved2;	/* old st_gid */
+	unsigned int	st_rdev;
+	off64_t		st_size;
+	time_t		st_atime;
+	unsigned int	st_spare1;
+	time_t		st_mtime;
+	unsigned int	st_spare2;
+	time_t		st_ctime;
+	unsigned int	st_spare3;
+	int		st_blksize;
+	__u64		st_blocks;
+	unsigned int	__unused1;	/* ACL stuff */
+	unsigned int	__unused2;	/* network */
+	ino_t           __unused3;      /* network */
+	unsigned int	__unused4;	/* cnodes */
+	unsigned short	__unused5;	/* netsite */
+	short		st_fstype;
+	unsigned int	st_realdev;
+	unsigned short	st_basemode;
+	unsigned short	st_spareshort;
+	uid_t		st_uid;
+	gid_t		st_gid;
+	unsigned int	st_spare4[3];
+};
+
+/* This is the struct that 32-bit userspace applications are expecting.
+ * How 64-bit apps are going to be compiled, I have no idea.  But at least
+ * this way, we don't have a wrapper in the kernel.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned int		__pad1;
+
+	unsigned int		__st_ino;	/* Not actually filled in */
+	unsigned int		st_mode;
+	unsigned int		st_nlink;
+	unsigned int		st_uid;
+	unsigned int		st_gid;
+	unsigned long long	st_rdev;
+	unsigned int		__pad2;
+	signed long long	st_size;
+	signed int		st_blksize;
+
+	signed long long	st_blocks;
+	signed int		st_atime;
+	unsigned int		st_atime_nsec;
+	signed int		st_mtime;
+	unsigned int		st_mtime_nsec;
+	signed int		st_ctime;
+	unsigned int		st_ctime_nsec;
+	unsigned long long	st_ino;
+};
+
+#endif
diff --git a/arch/parisc/include/asm/statfs.h b/arch/parisc/include/asm/statfs.h
new file mode 100644
index 0000000..324bea9
--- /dev/null
+++ b/arch/parisc/include/asm/statfs.h
@@ -0,0 +1,7 @@
+#ifndef _PARISC_STATFS_H
+#define _PARISC_STATFS_H
+
+#define __statfs_word long
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/arch/parisc/include/asm/string.h b/arch/parisc/include/asm/string.h
new file mode 100644
index 0000000..eda01be
--- /dev/null
+++ b/arch/parisc/include/asm/string.h
@@ -0,0 +1,10 @@
+#ifndef _PA_STRING_H_
+#define _PA_STRING_H_
+
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void *, int, size_t);
+
+#define __HAVE_ARCH_MEMCPY
+void * memcpy(void * dest,const void *src,size_t count);
+
+#endif
diff --git a/arch/parisc/include/asm/superio.h b/arch/parisc/include/asm/superio.h
new file mode 100644
index 0000000..6598acb
--- /dev/null
+++ b/arch/parisc/include/asm/superio.h
@@ -0,0 +1,85 @@
+#ifndef _PARISC_SUPERIO_H
+#define _PARISC_SUPERIO_H
+
+#define IC_PIC1    0x20		/* PCI I/O address of master 8259 */
+#define IC_PIC2    0xA0		/* PCI I/O address of slave */
+
+/* Config Space Offsets to configuration and base address registers */
+#define SIO_CR     0x5A		/* Configuration Register */
+#define SIO_ACPIBAR 0x88	/* ACPI BAR */
+#define SIO_FDCBAR 0x90		/* Floppy Disk Controller BAR */
+#define SIO_SP1BAR 0x94		/* Serial 1 BAR */
+#define SIO_SP2BAR 0x98		/* Serial 2 BAR */
+#define SIO_PPBAR  0x9C		/* Parallel BAR */
+
+#define TRIGGER_1  0x67		/* Edge/level trigger register 1 */
+#define TRIGGER_2  0x68		/* Edge/level trigger register 2 */
+
+/* Interrupt Routing Control registers */
+#define CFG_IR_SER    0x69	/* Serial 1 [0:3] and Serial 2 [4:7] */
+#define CFG_IR_PFD    0x6a	/* Parallel [0:3] and Floppy [4:7] */
+#define CFG_IR_IDE    0x6b	/* IDE1     [0:3] and IDE2 [4:7] */
+#define CFG_IR_INTAB  0x6c	/* PCI INTA [0:3] and INT B [4:7] */
+#define CFG_IR_INTCD  0x6d	/* PCI INTC [0:3] and INT D [4:7] */
+#define CFG_IR_PS2    0x6e	/* PS/2 KBINT [0:3] and Mouse [4:7] */
+#define CFG_IR_FXBUS  0x6f	/* FXIRQ[0] [0:3] and FXIRQ[1] [4:7] */
+#define CFG_IR_USB    0x70	/* FXIRQ[2] [0:3] and USB [4:7] */
+#define CFG_IR_ACPI   0x71	/* ACPI SCI [0:3] and reserved [4:7] */
+
+#define CFG_IR_LOW     CFG_IR_SER	/* Lowest interrupt routing reg */
+#define CFG_IR_HIGH    CFG_IR_ACPI	/* Highest interrupt routing reg */
+
+/* 8259 operational control words */
+#define OCW2_EOI   0x20		/* Non-specific EOI */
+#define OCW2_SEOI  0x60		/* Specific EOI */
+#define OCW3_IIR   0x0A		/* Read request register */
+#define OCW3_ISR   0x0B		/* Read service register */
+#define OCW3_POLL  0x0C		/* Poll the PIC for an interrupt vector */
+
+/* Interrupt lines. Only PIC1 is used */
+#define USB_IRQ    1		/* USB */
+#define SP1_IRQ    3		/* Serial port 1 */
+#define SP2_IRQ    4		/* Serial port 2 */
+#define PAR_IRQ    5		/* Parallel port */
+#define FDC_IRQ    6		/* Floppy controller */
+#define IDE_IRQ    7		/* IDE (pri+sec) */
+
+/* ACPI registers */
+#define USB_REG_CR	0x1f	/* USB Regulator Control Register */
+
+#define SUPERIO_NIRQS   8
+
+struct superio_device {
+	u32 fdc_base;
+	u32 sp1_base;
+	u32 sp2_base;
+	u32 pp_base;
+	u32 acpi_base;
+	int suckyio_irq_enabled;
+	struct pci_dev *lio_pdev;       /* pci device for legacy IO (fn 1) */
+	struct pci_dev *usb_pdev;       /* pci device for USB (fn 2) */
+};
+
+/*
+ * Does NS make a 87415 based plug in PCI card? If so, because of this
+ * macro we currently don't support it being plugged into a machine
+ * that contains a SuperIO chip AND has CONFIG_SUPERIO enabled.
+ *
+ * This could be fixed by checking to see if function 1 exists, and
+ * if it is SuperIO Legacy IO; but really now, is this combination
+ * going to EVER happen?
+ */
+
+#define SUPERIO_IDE_FN 0 /* Function number of IDE controller */
+#define SUPERIO_LIO_FN 1 /* Function number of Legacy IO controller */
+#define SUPERIO_USB_FN 2 /* Function number of USB controller */
+
+#define is_superio_device(x) \
+	(((x)->vendor == PCI_VENDOR_ID_NS) && \
+	(  ((x)->device == PCI_DEVICE_ID_NS_87415) \
+	|| ((x)->device == PCI_DEVICE_ID_NS_87560_LIO) \
+	|| ((x)->device == PCI_DEVICE_ID_NS_87560_USB) ) )
+
+extern int superio_fixup_irq(struct pci_dev *pcidev); /* called by iosapic */
+
+#endif /* _PARISC_SUPERIO_H */
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
new file mode 100644
index 0000000..ee80c92
--- /dev/null
+++ b/arch/parisc/include/asm/system.h
@@ -0,0 +1,182 @@
+#ifndef __PARISC_SYSTEM_H
+#define __PARISC_SYSTEM_H
+
+#include <asm/psw.h>
+
+/* The program status word as bitfields.  */
+struct pa_psw {
+	unsigned int y:1;
+	unsigned int z:1;
+	unsigned int rv:2;
+	unsigned int w:1;
+	unsigned int e:1;
+	unsigned int s:1;
+	unsigned int t:1;
+
+	unsigned int h:1;
+	unsigned int l:1;
+	unsigned int n:1;
+	unsigned int x:1;
+	unsigned int b:1;
+	unsigned int c:1;
+	unsigned int v:1;
+	unsigned int m:1;
+
+	unsigned int cb:8;
+
+	unsigned int o:1;
+	unsigned int g:1;
+	unsigned int f:1;
+	unsigned int r:1;
+	unsigned int q:1;
+	unsigned int p:1;
+	unsigned int d:1;
+	unsigned int i:1;
+};
+
+#ifdef CONFIG_64BIT
+#define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW + 4))
+#else
+#define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW))
+#endif
+
+struct task_struct;
+
+extern struct task_struct *_switch_to(struct task_struct *, struct task_struct *);
+
+#define switch_to(prev, next, last) do {			\
+	(last) = _switch_to(prev, next);			\
+} while(0)
+
+/* interrupt control */
+#define local_save_flags(x)	__asm__ __volatile__("ssm 0, %0" : "=r" (x) : : "memory")
+#define local_irq_disable()	__asm__ __volatile__("rsm %0,%%r0\n" : : "i" (PSW_I) : "memory" )
+#define local_irq_enable()	__asm__ __volatile__("ssm %0,%%r0\n" : : "i" (PSW_I) : "memory" )
+
+#define local_irq_save(x) \
+	__asm__ __volatile__("rsm %1,%0" : "=r" (x) :"i" (PSW_I) : "memory" )
+#define local_irq_restore(x) \
+	__asm__ __volatile__("mtsm %0" : : "r" (x) : "memory" )
+
+#define irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	(flags & PSW_I) == 0;		\
+})
+
+#define mfctl(reg)	({		\
+	unsigned long cr;		\
+	__asm__ __volatile__(		\
+		"mfctl " #reg ",%0" :	\
+		 "=r" (cr)		\
+	);				\
+	cr;				\
+})
+
+#define mtctl(gr, cr) \
+	__asm__ __volatile__("mtctl %0,%1" \
+		: /* no outputs */ \
+		: "r" (gr), "i" (cr) : "memory")
+
+/* these are here to de-mystefy the calling code, and to provide hooks */
+/* which I needed for debugging EIEM problems -PB */
+#define get_eiem() mfctl(15)
+static inline void set_eiem(unsigned long val)
+{
+	mtctl(val, 15);
+}
+
+#define mfsp(reg)	({		\
+	unsigned long cr;		\
+	__asm__ __volatile__(		\
+		"mfsp " #reg ",%0" :	\
+		 "=r" (cr)		\
+	);				\
+	cr;				\
+})
+
+#define mtsp(gr, cr) \
+	__asm__ __volatile__("mtsp %0,%1" \
+		: /* no outputs */ \
+		: "r" (gr), "i" (cr) : "memory")
+
+
+/*
+** This is simply the barrier() macro from linux/kernel.h but when serial.c
+** uses tqueue.h uses smp_mb() defined using barrier(), linux/kernel.h
+** hasn't yet been included yet so it fails, thus repeating the macro here.
+**
+** PA-RISC architecture allows for weakly ordered memory accesses although
+** none of the processors use it. There is a strong ordered bit that is
+** set in the O-bit of the page directory entry. Operating systems that
+** can not tolerate out of order accesses should set this bit when mapping
+** pages. The O-bit of the PSW should also be set to 1 (I don't believe any
+** of the processor implemented the PSW O-bit). The PCX-W ERS states that
+** the TLB O-bit is not implemented so the page directory does not need to
+** have the O-bit set when mapping pages (section 3.1). This section also
+** states that the PSW Y, Z, G, and O bits are not implemented.
+** So it looks like nothing needs to be done for parisc-linux (yet).
+** (thanks to chada for the above comment -ggg)
+**
+** The __asm__ op below simple prevents gcc/ld from reordering
+** instructions across the mb() "call".
+*/
+#define mb()		__asm__ __volatile__("":::"memory")	/* barrier() */
+#define rmb()		mb()
+#define wmb()		mb()
+#define smp_mb()	mb()
+#define smp_rmb()	mb()
+#define smp_wmb()	mb()
+#define smp_read_barrier_depends()	do { } while(0)
+#define read_barrier_depends()		do { } while(0)
+
+#define set_mb(var, value)		do { var = value; mb(); } while (0)
+
+#ifndef CONFIG_PA20
+/* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
+   and GCC only guarantees 8-byte alignment for stack locals, we can't
+   be assured of 16-byte alignment for atomic lock data even if we
+   specify "__attribute ((aligned(16)))" in the type declaration.  So,
+   we use a struct containing an array of four ints for the atomic lock
+   type and dynamically select the 16-byte aligned int from the array
+   for the semaphore.  */
+
+#define __PA_LDCW_ALIGNMENT	16
+#define __ldcw_align(a) ({					\
+	unsigned long __ret = (unsigned long) &(a)->lock[0];	\
+	__ret = (__ret + __PA_LDCW_ALIGNMENT - 1)		\
+		& ~(__PA_LDCW_ALIGNMENT - 1);			\
+	(volatile unsigned int *) __ret;			\
+})
+#define __LDCW	"ldcw"
+
+#else /*CONFIG_PA20*/
+/* From: "Jim Hull" <jim.hull of hp.com>
+   I've attached a summary of the change, but basically, for PA 2.0, as
+   long as the ",CO" (coherent operation) completer is specified, then the
+   16-byte alignment requirement for ldcw and ldcd is relaxed, and instead
+   they only require "natural" alignment (4-byte for ldcw, 8-byte for
+   ldcd). */
+
+#define __PA_LDCW_ALIGNMENT	4
+#define __ldcw_align(a) ((volatile unsigned int *)a)
+#define __LDCW	"ldcw,co"
+
+#endif /*!CONFIG_PA20*/
+
+/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
+#define __ldcw(a) ({						\
+	unsigned __ret;						\
+	__asm__ __volatile__(__LDCW " 0(%1),%0"			\
+		: "=r" (__ret) : "r" (a));			\
+	__ret;							\
+})
+
+#ifdef CONFIG_SMP
+# define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif
diff --git a/arch/parisc/include/asm/termbits.h b/arch/parisc/include/asm/termbits.h
new file mode 100644
index 0000000..d8bbc73
--- /dev/null
+++ b/arch/parisc/include/asm/termbits.h
@@ -0,0 +1,200 @@
+#ifndef __ARCH_PARISC_TERMBITS_H__
+#define __ARCH_PARISC_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0040000
+#define IUTF8	0100000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD   0010017
+#define  B0     0000000         /* hang up */
+#define  B50    0000001
+#define  B75    0000002
+#define  B110   0000003
+#define  B134   0000004
+#define  B150   0000005
+#define  B200   0000006
+#define  B300   0000007
+#define  B600   0000010
+#define  B1200  0000011
+#define  B1800  0000012
+#define  B2400  0000013
+#define  B4800  0000014
+#define  B9600  0000015
+#define  B19200 0000016
+#define  B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE   0000060
+#define   CS5   0000000
+#define   CS6   0000020
+#define   CS7   0000040
+#define   CS8   0000060
+#define CSTOPB  0000100
+#define CREAD   0000200
+#define PARENB  0000400
+#define PARODD  0001000
+#define HUPCL   0002000
+#define CLOCAL  0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD    002003600000		/* input baud rate */
+#define CMSPAR    010000000000          /* mark or space (stick) parity */
+#define CRTSCTS   020000000000          /* flow control */
+
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+
+/* c_lflag bits */
+#define ISIG    0000001
+#define ICANON  0000002
+#define XCASE   0000004
+#define ECHO    0000010
+#define ECHOE   0000020
+#define ECHOK   0000040
+#define ECHONL  0000100
+#define NOFLSH  0000200
+#define TOSTOP  0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE  0004000
+#define FLUSHO  0010000
+#define PENDIN  0040000
+#define IEXTEN  0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif
diff --git a/arch/parisc/include/asm/termios.h b/arch/parisc/include/asm/termios.h
new file mode 100644
index 0000000..a2a57a4
--- /dev/null
+++ b/arch/parisc/include/asm/termios.h
@@ -0,0 +1,90 @@
+#ifndef _PARISC_TERMIOS_H
+#define _PARISC_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _PARISC_TERMIOS_H */
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
new file mode 100644
index 0000000..0407959
--- /dev/null
+++ b/arch/parisc/include/asm/thread_info.h
@@ -0,0 +1,76 @@
+#ifndef _ASM_PARISC_THREAD_INFO_H
+#define _ASM_PARISC_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+
+struct thread_info {
+	struct task_struct *task;	/* main task structure */
+	struct exec_domain *exec_domain;/* execution domain */
+	unsigned long flags;		/* thread_info flags (see TIF_*) */
+	mm_segment_t addr_limit;	/* user-level address space limit */
+	__u32 cpu;			/* current CPU */
+	int preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
+	struct restart_block restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= 1,			\
+  	.restart_block	= {			\
+		.fn = do_no_restart_syscall	\
+	}					\
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+
+/* thread information allocation */
+
+#define THREAD_SIZE_ORDER            2
+/* Be sure to hunt all references to this down when you change the size of
+ * the kernel stack */
+#define THREAD_SIZE             (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_SHIFT            (PAGE_SHIFT + THREAD_SIZE_ORDER)
+
+/* how to get the thread information struct from C */
+#define current_thread_info()	((struct thread_info *)mfctl(30))
+
+#endif /* !__ASSEMBLY */
+
+#define PREEMPT_ACTIVE_BIT	28
+#define PREEMPT_ACTIVE		(1 << PREEMPT_ACTIVE_BIT)
+
+/*
+ * thread information flags
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_32BIT               4       /* 32 bit binary */
+#define TIF_MEMDIE		5
+#define TIF_RESTORE_SIGMASK	6	/* restore saved signal mask */
+#define TIF_FREEZE		7	/* is freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_32BIT		(1 << TIF_32BIT)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+
+#define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | \
+                                 _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PARISC_THREAD_INFO_H */
diff --git a/arch/parisc/include/asm/timex.h b/arch/parisc/include/asm/timex.h
new file mode 100644
index 0000000..3b68d77
--- /dev/null
+++ b/arch/parisc/include/asm/timex.h
@@ -0,0 +1,20 @@
+/*
+ * linux/include/asm-parisc/timex.h
+ *
+ * PARISC architecture timex specifications
+ */
+#ifndef _ASMPARISC_TIMEX_H
+#define _ASMPARISC_TIMEX_H
+
+#include <asm/system.h>
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return mfctl(16);
+}
+
+#endif
diff --git a/arch/parisc/include/asm/tlb.h b/arch/parisc/include/asm/tlb.h
new file mode 100644
index 0000000..383b1db
--- /dev/null
+++ b/arch/parisc/include/asm/tlb.h
@@ -0,0 +1,27 @@
+#ifndef _PARISC_TLB_H
+#define _PARISC_TLB_H
+
+#define tlb_flush(tlb)			\
+do {	if ((tlb)->fullmm)		\
+		flush_tlb_mm((tlb)->mm);\
+} while (0)
+
+#define tlb_start_vma(tlb, vma) \
+do {	if (!(tlb)->fullmm)	\
+		flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+} while (0)
+
+#define tlb_end_vma(tlb, vma)	\
+do {	if (!(tlb)->fullmm)	\
+		flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
+} while (0)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) \
+	do { } while (0)
+
+#include <asm-generic/tlb.h>
+
+#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+
+#endif
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
new file mode 100644
index 0000000..b72ec66
--- /dev/null
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -0,0 +1,80 @@
+#ifndef _PARISC_TLBFLUSH_H
+#define _PARISC_TLBFLUSH_H
+
+/* TLB flushing routines.... */
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <asm/mmu_context.h>
+
+
+/* This is for the serialisation of PxTLB broadcasts.  At least on the
+ * N class systems, only one PxTLB inter processor broadcast can be
+ * active at any one time on the Merced bus.  This tlb purge
+ * synchronisation is fairly lightweight and harmless so we activate
+ * it on all SMP systems not just the N class.  We also need to have
+ * preemption disabled on uniprocessor machines, and spin_lock does that
+ * nicely.
+ */
+extern spinlock_t pa_tlb_lock;
+
+#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
+#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_all_local(void *);
+
+/*
+ * flush_tlb_mm()
+ *
+ * XXX This code is NOT valid for HP-UX compatibility processes,
+ * (although it will probably work 99% of the time). HP-UX
+ * processes are free to play with the space id's and save them
+ * over long periods of time, etc. so we have to preserve the
+ * space and just flush the entire tlb. We need to check the
+ * personality in order to do that, but the personality is not
+ * currently being set correctly.
+ *
+ * Of course, Linux processes could do the same thing, but
+ * we don't support that (and the compilers, dynamic linker,
+ * etc. do not do that).
+ */
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG_ON(mm == &init_mm); /* Should never happen */
+
+#ifdef CONFIG_SMP
+	flush_tlb_all();
+#else
+	if (mm) {
+		if (mm->context != 0)
+			free_sid(mm->context);
+		mm->context = alloc_sid();
+		if (mm == current->active_mm)
+			load_context(mm->context);
+	}
+#endif
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+	unsigned long addr)
+{
+	/* For one page, it's not worth testing the split_tlb variable */
+
+	mb();
+	mtsp(vma->vm_mm->context,1);
+	purge_tlb_start();
+	pdtlb(addr);
+	pitlb(addr);
+	purge_tlb_end();
+}
+
+void __flush_tlb_range(unsigned long sid,
+	unsigned long start, unsigned long end);
+
+#define flush_tlb_range(vma,start,end) __flush_tlb_range((vma)->vm_mm->context,start,end)
+
+#define flush_tlb_kernel_range(start, end) __flush_tlb_range(0,start,end)
+
+#endif
diff --git a/arch/parisc/include/asm/topology.h b/arch/parisc/include/asm/topology.h
new file mode 100644
index 0000000..d8133eb
--- /dev/null
+++ b/arch/parisc/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_PARISC_TOPOLOGY_H
+#define _ASM_PARISC_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_PARISC_TOPOLOGY_H */
diff --git a/arch/parisc/include/asm/traps.h b/arch/parisc/include/asm/traps.h
new file mode 100644
index 0000000..1945f99
--- /dev/null
+++ b/arch/parisc/include/asm/traps.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_TRAPS_H
+#define __ASM_TRAPS_H
+
+#ifdef __KERNEL__
+struct pt_regs;
+
+/* traps.c */
+void parisc_terminate(char *msg, struct pt_regs *regs,
+		int code, unsigned long offset);
+
+/* mm/fault.c */
+void do_page_fault(struct pt_regs *regs, unsigned long code,
+		unsigned long address);
+#endif
+
+#endif
diff --git a/arch/parisc/include/asm/types.h b/arch/parisc/include/asm/types.h
new file mode 100644
index 0000000..7f5a39b
--- /dev/null
+++ b/arch/parisc/include/asm/types.h
@@ -0,0 +1,36 @@
+#ifndef _PARISC_TYPES_H
+#define _PARISC_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifdef CONFIG_64BIT
+#define BITS_PER_LONG 64
+#define SHIFT_PER_LONG 6
+#else
+#define BITS_PER_LONG 32
+#define SHIFT_PER_LONG 5
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
new file mode 100644
index 0000000..4878b95
--- /dev/null
+++ b/arch/parisc/include/asm/uaccess.h
@@ -0,0 +1,244 @@
+#ifndef __PARISC_UACCESS_H
+#define __PARISC_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/cache.h>
+#include <asm-generic/uaccess.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+#define KERNEL_DS	((mm_segment_t){0})
+#define USER_DS 	((mm_segment_t){1})
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+/*
+ * Note that since kernel addresses are in a separate address space on
+ * parisc, we don't need to do anything for access_ok().
+ * We just let the page fault handler do the right thing. This also means
+ * that put_user is the same as __put_user, etc.
+ */
+
+extern int __get_kernel_bad(void);
+extern int __get_user_bad(void);
+extern int __put_kernel_bad(void);
+extern int __put_user_bad(void);
+
+static inline long access_ok(int type, const void __user * addr,
+		unsigned long size)
+{
+	return 1;
+}
+
+#define put_user __put_user
+#define get_user __get_user
+
+#if !defined(CONFIG_64BIT)
+#define LDD_KERNEL(ptr)		__get_kernel_bad();
+#define LDD_USER(ptr)		__get_user_bad();
+#define STD_KERNEL(x, ptr)	__put_kernel_asm64(x,ptr)
+#define STD_USER(x, ptr)	__put_user_asm64(x,ptr)
+#define ASM_WORD_INSN		".word\t"
+#else
+#define LDD_KERNEL(ptr)		__get_kernel_asm("ldd",ptr)
+#define LDD_USER(ptr)		__get_user_asm("ldd",ptr)
+#define STD_KERNEL(x, ptr)	__put_kernel_asm("std",x,ptr)
+#define STD_USER(x, ptr)	__put_user_asm("std",x,ptr)
+#define ASM_WORD_INSN		".dword\t"
+#endif
+
+/*
+ * The exception table contains two values: the first is an address
+ * for an instruction that is allowed to fault, and the second is
+ * the address to the fixup routine. 
+ */
+
+struct exception_table_entry {
+	unsigned long insn;  /* address of insn that is allowed to fault.   */
+	long fixup;          /* fixup routine */
+};
+
+#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
+	".section __ex_table,\"aw\"\n"			   \
+	ASM_WORD_INSN #fault_addr ", " #except_addr "\n\t" \
+	".previous\n"
+
+/*
+ * The page fault handler stores, in a per-cpu area, the following information
+ * if a fixup routine is available.
+ */
+struct exception_data {
+	unsigned long fault_ip;
+	unsigned long fault_space;
+	unsigned long fault_addr;
+};
+
+#define __get_user(x,ptr)                               \
+({                                                      \
+	register long __gu_err __asm__ ("r8") = 0;      \
+	register long __gu_val __asm__ ("r9") = 0;      \
+							\
+	if (segment_eq(get_fs(),KERNEL_DS)) {           \
+	    switch (sizeof(*(ptr))) {                   \
+	    case 1: __get_kernel_asm("ldb",ptr); break; \
+	    case 2: __get_kernel_asm("ldh",ptr); break; \
+	    case 4: __get_kernel_asm("ldw",ptr); break; \
+	    case 8: LDD_KERNEL(ptr); break;		\
+	    default: __get_kernel_bad(); break;         \
+	    }                                           \
+	}                                               \
+	else {                                          \
+	    switch (sizeof(*(ptr))) {                   \
+	    case 1: __get_user_asm("ldb",ptr); break;   \
+	    case 2: __get_user_asm("ldh",ptr); break;   \
+	    case 4: __get_user_asm("ldw",ptr); break;   \
+	    case 8: LDD_USER(ptr);  break;		\
+	    default: __get_user_bad(); break;           \
+	    }                                           \
+	}                                               \
+							\
+	(x) = (__typeof__(*(ptr))) __gu_val;            \
+	__gu_err;                                       \
+})
+
+#define __get_kernel_asm(ldx,ptr)                       \
+	__asm__("\n1:\t" ldx "\t0(%2),%0\n\t"		\
+		ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_get_user_skip_1)\
+		: "=r"(__gu_val), "=r"(__gu_err)        \
+		: "r"(ptr), "1"(__gu_err)		\
+		: "r1");
+
+#define __get_user_asm(ldx,ptr)                         \
+	__asm__("\n1:\t" ldx "\t0(%%sr3,%2),%0\n\t"	\
+		ASM_EXCEPTIONTABLE_ENTRY(1b,fixup_get_user_skip_1)\
+		: "=r"(__gu_val), "=r"(__gu_err)        \
+		: "r"(ptr), "1"(__gu_err)		\
+		: "r1");
+
+#define __put_user(x,ptr)                                       \
+({								\
+	register long __pu_err __asm__ ("r8") = 0;      	\
+        __typeof__(*(ptr)) __x = (__typeof__(*(ptr)))(x);	\
+								\
+	if (segment_eq(get_fs(),KERNEL_DS)) {                   \
+	    switch (sizeof(*(ptr))) {                           \
+	    case 1: __put_kernel_asm("stb",__x,ptr); break;     \
+	    case 2: __put_kernel_asm("sth",__x,ptr); break;     \
+	    case 4: __put_kernel_asm("stw",__x,ptr); break;     \
+	    case 8: STD_KERNEL(__x,ptr); break;			\
+	    default: __put_kernel_bad(); break;			\
+	    }                                                   \
+	}                                                       \
+	else {                                                  \
+	    switch (sizeof(*(ptr))) {                           \
+	    case 1: __put_user_asm("stb",__x,ptr); break;       \
+	    case 2: __put_user_asm("sth",__x,ptr); break;       \
+	    case 4: __put_user_asm("stw",__x,ptr); break;       \
+	    case 8: STD_USER(__x,ptr); break;			\
+	    default: __put_user_bad(); break;			\
+	    }                                                   \
+	}                                                       \
+								\
+	__pu_err;						\
+})
+
+/*
+ * The "__put_user/kernel_asm()" macros tell gcc they read from memory
+ * instead of writing. This is because they do not write to any memory
+ * gcc knows about, so there are no aliasing issues. These macros must
+ * also be aware that "fixup_put_user_skip_[12]" are executed in the
+ * context of the fault, and any registers used there must be listed
+ * as clobbers. In this case only "r1" is used by the current routines.
+ * r8/r9 are already listed as err/val.
+ */
+
+#define __put_kernel_asm(stx,x,ptr)                         \
+	__asm__ __volatile__ (                              \
+		"\n1:\t" stx "\t%2,0(%1)\n\t"		    \
+		ASM_EXCEPTIONTABLE_ENTRY(1b,fixup_put_user_skip_1)\
+		: "=r"(__pu_err)                            \
+		: "r"(ptr), "r"(x), "0"(__pu_err)	    \
+	    	: "r1")
+
+#define __put_user_asm(stx,x,ptr)                           \
+	__asm__ __volatile__ (                              \
+		"\n1:\t" stx "\t%2,0(%%sr3,%1)\n\t"	    \
+		ASM_EXCEPTIONTABLE_ENTRY(1b,fixup_put_user_skip_1)\
+		: "=r"(__pu_err)                            \
+		: "r"(ptr), "r"(x), "0"(__pu_err)	    \
+		: "r1")
+
+
+#if !defined(CONFIG_64BIT)
+
+#define __put_kernel_asm64(__val,ptr) do {		    \
+	u64 __val64 = (u64)(__val);			    \
+	u32 hi = (__val64) >> 32;			    \
+	u32 lo = (__val64) & 0xffffffff;		    \
+	__asm__ __volatile__ (				    \
+		"\n1:\tstw %2,0(%1)"			    \
+		"\n2:\tstw %3,4(%1)\n\t"		    \
+		ASM_EXCEPTIONTABLE_ENTRY(1b,fixup_put_user_skip_2)\
+		ASM_EXCEPTIONTABLE_ENTRY(2b,fixup_put_user_skip_1)\
+		: "=r"(__pu_err)                            \
+		: "r"(ptr), "r"(hi), "r"(lo), "0"(__pu_err) \
+		: "r1");				    \
+} while (0)
+
+#define __put_user_asm64(__val,ptr) do {	    	    \
+	u64 __val64 = (u64)(__val);			    \
+	u32 hi = (__val64) >> 32;			    \
+	u32 lo = (__val64) & 0xffffffff;		    \
+	__asm__ __volatile__ (				    \
+		"\n1:\tstw %2,0(%%sr3,%1)"		    \
+		"\n2:\tstw %3,4(%%sr3,%1)\n\t"		    \
+		ASM_EXCEPTIONTABLE_ENTRY(1b,fixup_put_user_skip_2)\
+		ASM_EXCEPTIONTABLE_ENTRY(2b,fixup_put_user_skip_1)\
+		: "=r"(__pu_err)                            \
+		: "r"(ptr), "r"(hi), "r"(lo), "0"(__pu_err) \
+		: "r1");				    \
+} while (0)
+
+#endif /* !defined(CONFIG_64BIT) */
+
+
+/*
+ * Complex access routines -- external declarations
+ */
+
+extern unsigned long lcopy_to_user(void __user *, const void *, unsigned long);
+extern unsigned long lcopy_from_user(void *, const void __user *, unsigned long);
+extern unsigned long lcopy_in_user(void __user *, const void __user *, unsigned long);
+extern long lstrncpy_from_user(char *, const char __user *, long);
+extern unsigned lclear_user(void __user *,unsigned long);
+extern long lstrnlen_user(const char __user *,long);
+
+/*
+ * Complex access routines -- macros
+ */
+
+#define strncpy_from_user lstrncpy_from_user
+#define strnlen_user lstrnlen_user
+#define strlen_user(str) lstrnlen_user(str, 0x7fffffffL)
+#define clear_user lclear_user
+#define __clear_user lclear_user
+
+unsigned long copy_to_user(void __user *dst, const void *src, unsigned long len);
+#define __copy_to_user copy_to_user
+unsigned long copy_from_user(void *dst, const void __user *src, unsigned long len);
+#define __copy_from_user copy_from_user
+unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned long len);
+#define __copy_in_user copy_in_user
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#endif /* __PARISC_UACCESS_H */
diff --git a/arch/parisc/include/asm/ucontext.h b/arch/parisc/include/asm/ucontext.h
new file mode 100644
index 0000000..6c8883e
--- /dev/null
+++ b/arch/parisc/include/asm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_PARISC_UCONTEXT_H
+#define _ASM_PARISC_UCONTEXT_H
+
+struct ucontext {
+	unsigned int	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASM_PARISC_UCONTEXT_H */
diff --git a/arch/parisc/include/asm/unaligned.h b/arch/parisc/include/asm/unaligned.h
new file mode 100644
index 0000000..dfc5d33
--- /dev/null
+++ b/arch/parisc/include/asm/unaligned.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_PARISC_UNALIGNED_H
+#define _ASM_PARISC_UNALIGNED_H
+
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#ifdef __KERNEL__
+struct pt_regs;
+void handle_unaligned(struct pt_regs *regs);
+int check_unaligned(struct pt_regs *regs);
+#endif
+
+#endif /* _ASM_PARISC_UNALIGNED_H */
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
new file mode 100644
index 0000000..ef26b00
--- /dev/null
+++ b/arch/parisc/include/asm/unistd.h
@@ -0,0 +1,997 @@
+#ifndef _ASM_PARISC_UNISTD_H_
+#define _ASM_PARISC_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+/*
+ *   HP-UX system calls get their native numbers for binary compatibility.
+ */
+
+#define __NR_HPUX_exit                    1
+#define __NR_HPUX_fork                    2
+#define __NR_HPUX_read                    3
+#define __NR_HPUX_write                   4
+#define __NR_HPUX_open                    5
+#define __NR_HPUX_close                   6
+#define __NR_HPUX_wait                    7
+#define __NR_HPUX_creat                   8
+#define __NR_HPUX_link                    9
+#define __NR_HPUX_unlink                 10
+#define __NR_HPUX_execv                  11
+#define __NR_HPUX_chdir                  12
+#define __NR_HPUX_time                   13
+#define __NR_HPUX_mknod                  14
+#define __NR_HPUX_chmod                  15
+#define __NR_HPUX_chown                  16
+#define __NR_HPUX_break                  17
+#define __NR_HPUX_lchmod                 18
+#define __NR_HPUX_lseek                  19
+#define __NR_HPUX_getpid                 20
+#define __NR_HPUX_mount                  21
+#define __NR_HPUX_umount                 22
+#define __NR_HPUX_setuid                 23
+#define __NR_HPUX_getuid                 24
+#define __NR_HPUX_stime                  25
+#define __NR_HPUX_ptrace                 26
+#define __NR_HPUX_alarm                  27
+#define __NR_HPUX_oldfstat               28
+#define __NR_HPUX_pause                  29
+#define __NR_HPUX_utime                  30
+#define __NR_HPUX_stty                   31
+#define __NR_HPUX_gtty                   32
+#define __NR_HPUX_access                 33
+#define __NR_HPUX_nice                   34
+#define __NR_HPUX_ftime                  35
+#define __NR_HPUX_sync                   36
+#define __NR_HPUX_kill                   37
+#define __NR_HPUX_stat                   38
+#define __NR_HPUX_setpgrp3               39
+#define __NR_HPUX_lstat                  40
+#define __NR_HPUX_dup                    41
+#define __NR_HPUX_pipe                   42
+#define __NR_HPUX_times                  43
+#define __NR_HPUX_profil                 44
+#define __NR_HPUX_ki_call                45
+#define __NR_HPUX_setgid                 46
+#define __NR_HPUX_getgid                 47
+#define __NR_HPUX_sigsys                 48
+#define __NR_HPUX_reserved1              49
+#define __NR_HPUX_reserved2              50
+#define __NR_HPUX_acct                   51
+#define __NR_HPUX_set_userthreadid       52
+#define __NR_HPUX_oldlock                53
+#define __NR_HPUX_ioctl                  54
+#define __NR_HPUX_reboot                 55
+#define __NR_HPUX_symlink                56
+#define __NR_HPUX_utssys                 57
+#define __NR_HPUX_readlink               58
+#define __NR_HPUX_execve                 59
+#define __NR_HPUX_umask                  60
+#define __NR_HPUX_chroot                 61
+#define __NR_HPUX_fcntl                  62
+#define __NR_HPUX_ulimit                 63
+#define __NR_HPUX_getpagesize            64
+#define __NR_HPUX_mremap                 65
+#define __NR_HPUX_vfork                  66
+#define __NR_HPUX_vread                  67
+#define __NR_HPUX_vwrite                 68
+#define __NR_HPUX_sbrk                   69
+#define __NR_HPUX_sstk                   70
+#define __NR_HPUX_mmap                   71
+#define __NR_HPUX_vadvise                72
+#define __NR_HPUX_munmap                 73
+#define __NR_HPUX_mprotect               74
+#define __NR_HPUX_madvise                75
+#define __NR_HPUX_vhangup                76
+#define __NR_HPUX_swapoff                77
+#define __NR_HPUX_mincore                78
+#define __NR_HPUX_getgroups              79
+#define __NR_HPUX_setgroups              80
+#define __NR_HPUX_getpgrp2               81
+#define __NR_HPUX_setpgrp2               82
+#define __NR_HPUX_setitimer              83
+#define __NR_HPUX_wait3                  84
+#define __NR_HPUX_swapon                 85
+#define __NR_HPUX_getitimer              86
+#define __NR_HPUX_gethostname42          87
+#define __NR_HPUX_sethostname42          88
+#define __NR_HPUX_getdtablesize          89
+#define __NR_HPUX_dup2                   90
+#define __NR_HPUX_getdopt                91
+#define __NR_HPUX_fstat                  92
+#define __NR_HPUX_select                 93
+#define __NR_HPUX_setdopt                94
+#define __NR_HPUX_fsync                  95
+#define __NR_HPUX_setpriority            96
+#define __NR_HPUX_socket_old             97
+#define __NR_HPUX_connect_old            98
+#define __NR_HPUX_accept_old             99
+#define __NR_HPUX_getpriority           100
+#define __NR_HPUX_send_old              101
+#define __NR_HPUX_recv_old              102
+#define __NR_HPUX_socketaddr_old        103
+#define __NR_HPUX_bind_old              104
+#define __NR_HPUX_setsockopt_old        105
+#define __NR_HPUX_listen_old            106
+#define __NR_HPUX_vtimes_old            107
+#define __NR_HPUX_sigvector             108
+#define __NR_HPUX_sigblock              109
+#define __NR_HPUX_siggetmask            110
+#define __NR_HPUX_sigpause              111
+#define __NR_HPUX_sigstack              112
+#define __NR_HPUX_recvmsg_old           113
+#define __NR_HPUX_sendmsg_old           114
+#define __NR_HPUX_vtrace_old            115
+#define __NR_HPUX_gettimeofday          116
+#define __NR_HPUX_getrusage             117
+#define __NR_HPUX_getsockopt_old        118
+#define __NR_HPUX_resuba_old            119
+#define __NR_HPUX_readv                 120
+#define __NR_HPUX_writev                121
+#define __NR_HPUX_settimeofday          122
+#define __NR_HPUX_fchown                123
+#define __NR_HPUX_fchmod                124
+#define __NR_HPUX_recvfrom_old          125
+#define __NR_HPUX_setresuid             126
+#define __NR_HPUX_setresgid             127
+#define __NR_HPUX_rename                128
+#define __NR_HPUX_truncate              129
+#define __NR_HPUX_ftruncate             130
+#define __NR_HPUX_flock_old             131
+#define __NR_HPUX_sysconf               132
+#define __NR_HPUX_sendto_old            133
+#define __NR_HPUX_shutdown_old          134
+#define __NR_HPUX_socketpair_old        135
+#define __NR_HPUX_mkdir                 136
+#define __NR_HPUX_rmdir                 137
+#define __NR_HPUX_utimes_old            138
+#define __NR_HPUX_sigcleanup_old        139
+#define __NR_HPUX_setcore               140
+#define __NR_HPUX_getpeername_old       141
+#define __NR_HPUX_gethostid             142
+#define __NR_HPUX_sethostid             143
+#define __NR_HPUX_getrlimit             144
+#define __NR_HPUX_setrlimit             145
+#define __NR_HPUX_killpg_old            146
+#define __NR_HPUX_cachectl              147
+#define __NR_HPUX_quotactl              148
+#define __NR_HPUX_get_sysinfo           149
+#define __NR_HPUX_getsockname_old       150
+#define __NR_HPUX_privgrp               151
+#define __NR_HPUX_rtprio                152
+#define __NR_HPUX_plock                 153
+#define __NR_HPUX_reserved3             154
+#define __NR_HPUX_lockf                 155
+#define __NR_HPUX_semget                156
+#define __NR_HPUX_osemctl               157
+#define __NR_HPUX_semop                 158
+#define __NR_HPUX_msgget                159
+#define __NR_HPUX_omsgctl               160
+#define __NR_HPUX_msgsnd                161
+#define __NR_HPUX_msgrecv               162
+#define __NR_HPUX_shmget                163
+#define __NR_HPUX_oshmctl               164
+#define __NR_HPUX_shmat                 165
+#define __NR_HPUX_shmdt                 166
+#define __NR_HPUX_m68020_advise         167
+/* [168,189] are for Discless/DUX */
+#define __NR_HPUX_csp                   168
+#define __NR_HPUX_cluster               169
+#define __NR_HPUX_mkrnod                170
+#define __NR_HPUX_test                  171
+#define __NR_HPUX_unsp_open             172
+#define __NR_HPUX_reserved4             173
+#define __NR_HPUX_getcontext_old        174
+#define __NR_HPUX_osetcontext           175
+#define __NR_HPUX_bigio                 176
+#define __NR_HPUX_pipenode              177
+#define __NR_HPUX_lsync                 178
+#define __NR_HPUX_getmachineid          179
+#define __NR_HPUX_cnodeid               180
+#define __NR_HPUX_cnodes                181
+#define __NR_HPUX_swapclients           182
+#define __NR_HPUX_rmt_process           183
+#define __NR_HPUX_dskless_stats         184
+#define __NR_HPUX_sigprocmask           185
+#define __NR_HPUX_sigpending            186
+#define __NR_HPUX_sigsuspend            187
+#define __NR_HPUX_sigaction             188
+#define __NR_HPUX_reserved5             189
+#define __NR_HPUX_nfssvc                190
+#define __NR_HPUX_getfh                 191
+#define __NR_HPUX_getdomainname         192
+#define __NR_HPUX_setdomainname         193
+#define __NR_HPUX_async_daemon          194
+#define __NR_HPUX_getdirentries         195
+#define __NR_HPUX_statfs                196
+#define __NR_HPUX_fstatfs               197
+#define __NR_HPUX_vfsmount              198
+#define __NR_HPUX_reserved6             199
+#define __NR_HPUX_waitpid               200
+/* 201 - 223 missing */
+#define __NR_HPUX_sigsetreturn          224
+#define __NR_HPUX_sigsetstatemask       225
+/* 226 missing */
+#define __NR_HPUX_cs                    227
+#define __NR_HPUX_cds                   228
+#define __NR_HPUX_set_no_trunc          229
+#define __NR_HPUX_pathconf              230
+#define __NR_HPUX_fpathconf             231
+/* 232, 233 missing */
+#define __NR_HPUX_nfs_fcntl             234
+#define __NR_HPUX_ogetacl               235
+#define __NR_HPUX_ofgetacl              236
+#define __NR_HPUX_osetacl               237
+#define __NR_HPUX_ofsetacl              238
+#define __NR_HPUX_pstat                 239
+#define __NR_HPUX_getaudid              240
+#define __NR_HPUX_setaudid              241
+#define __NR_HPUX_getaudproc            242
+#define __NR_HPUX_setaudproc            243
+#define __NR_HPUX_getevent              244
+#define __NR_HPUX_setevent              245
+#define __NR_HPUX_audwrite              246
+#define __NR_HPUX_audswitch             247
+#define __NR_HPUX_audctl                248
+#define __NR_HPUX_ogetaccess            249
+#define __NR_HPUX_fsctl                 250
+/* 251 - 258 missing */
+#define __NR_HPUX_swapfs                259
+#define __NR_HPUX_fss                   260
+/* 261 - 266 missing */
+#define __NR_HPUX_tsync                 267
+#define __NR_HPUX_getnumfds             268
+#define __NR_HPUX_poll                  269
+#define __NR_HPUX_getmsg                270
+#define __NR_HPUX_putmsg                271
+#define __NR_HPUX_fchdir                272
+#define __NR_HPUX_getmount_cnt          273
+#define __NR_HPUX_getmount_entry        274
+#define __NR_HPUX_accept                275
+#define __NR_HPUX_bind                  276
+#define __NR_HPUX_connect               277
+#define __NR_HPUX_getpeername           278
+#define __NR_HPUX_getsockname           279
+#define __NR_HPUX_getsockopt            280
+#define __NR_HPUX_listen                281
+#define __NR_HPUX_recv                  282
+#define __NR_HPUX_recvfrom              283
+#define __NR_HPUX_recvmsg               284
+#define __NR_HPUX_send                  285
+#define __NR_HPUX_sendmsg               286
+#define __NR_HPUX_sendto                287
+#define __NR_HPUX_setsockopt            288
+#define __NR_HPUX_shutdown              289
+#define __NR_HPUX_socket                290
+#define __NR_HPUX_socketpair            291
+#define __NR_HPUX_proc_open             292
+#define __NR_HPUX_proc_close            293
+#define __NR_HPUX_proc_send             294
+#define __NR_HPUX_proc_recv             295
+#define __NR_HPUX_proc_sendrecv         296
+#define __NR_HPUX_proc_syscall          297
+/* 298 - 311 missing */
+#define __NR_HPUX_semctl                312
+#define __NR_HPUX_msgctl                313
+#define __NR_HPUX_shmctl                314
+#define __NR_HPUX_mpctl                 315
+#define __NR_HPUX_exportfs              316
+#define __NR_HPUX_getpmsg               317
+#define __NR_HPUX_putpmsg               318
+/* 319 missing */
+#define __NR_HPUX_msync                 320
+#define __NR_HPUX_msleep                321
+#define __NR_HPUX_mwakeup               322
+#define __NR_HPUX_msem_init             323
+#define __NR_HPUX_msem_remove           324
+#define __NR_HPUX_adjtime               325
+#define __NR_HPUX_kload                 326
+#define __NR_HPUX_fattach               327
+#define __NR_HPUX_fdetach               328
+#define __NR_HPUX_serialize             329
+#define __NR_HPUX_statvfs               330
+#define __NR_HPUX_fstatvfs              331
+#define __NR_HPUX_lchown                332
+#define __NR_HPUX_getsid                333
+#define __NR_HPUX_sysfs                 334
+/* 335, 336 missing */
+#define __NR_HPUX_sched_setparam        337
+#define __NR_HPUX_sched_getparam        338
+#define __NR_HPUX_sched_setscheduler    339
+#define __NR_HPUX_sched_getscheduler    340
+#define __NR_HPUX_sched_yield           341
+#define __NR_HPUX_sched_get_priority_max 342
+#define __NR_HPUX_sched_get_priority_min 343
+#define __NR_HPUX_sched_rr_get_interval 344
+#define __NR_HPUX_clock_settime         345
+#define __NR_HPUX_clock_gettime         346
+#define __NR_HPUX_clock_getres          347
+#define __NR_HPUX_timer_create          348
+#define __NR_HPUX_timer_delete          349
+#define __NR_HPUX_timer_settime         350
+#define __NR_HPUX_timer_gettime         351
+#define __NR_HPUX_timer_getoverrun      352
+#define __NR_HPUX_nanosleep             353
+#define __NR_HPUX_toolbox               354
+/* 355 missing */
+#define __NR_HPUX_getdents              356
+#define __NR_HPUX_getcontext            357
+#define __NR_HPUX_sysinfo               358
+#define __NR_HPUX_fcntl64               359
+#define __NR_HPUX_ftruncate64           360
+#define __NR_HPUX_fstat64               361
+#define __NR_HPUX_getdirentries64       362
+#define __NR_HPUX_getrlimit64           363
+#define __NR_HPUX_lockf64               364
+#define __NR_HPUX_lseek64               365
+#define __NR_HPUX_lstat64               366
+#define __NR_HPUX_mmap64                367
+#define __NR_HPUX_setrlimit64           368
+#define __NR_HPUX_stat64                369
+#define __NR_HPUX_truncate64            370
+#define __NR_HPUX_ulimit64              371
+#define __NR_HPUX_pread                 372
+#define __NR_HPUX_preadv                373
+#define __NR_HPUX_pwrite                374
+#define __NR_HPUX_pwritev               375
+#define __NR_HPUX_pread64               376
+#define __NR_HPUX_preadv64              377
+#define __NR_HPUX_pwrite64              378
+#define __NR_HPUX_pwritev64             379
+#define __NR_HPUX_setcontext            380
+#define __NR_HPUX_sigaltstack           381
+#define __NR_HPUX_waitid                382
+#define __NR_HPUX_setpgrp               383
+#define __NR_HPUX_recvmsg2              384
+#define __NR_HPUX_sendmsg2              385
+#define __NR_HPUX_socket2               386
+#define __NR_HPUX_socketpair2           387
+#define __NR_HPUX_setregid              388
+#define __NR_HPUX_lwp_create            389
+#define __NR_HPUX_lwp_terminate         390
+#define __NR_HPUX_lwp_wait              391
+#define __NR_HPUX_lwp_suspend           392
+#define __NR_HPUX_lwp_resume            393
+/* 394 missing */
+#define __NR_HPUX_lwp_abort_syscall     395
+#define __NR_HPUX_lwp_info              396
+#define __NR_HPUX_lwp_kill              397
+#define __NR_HPUX_ksleep                398
+#define __NR_HPUX_kwakeup               399
+/* 400 missing */
+#define __NR_HPUX_pstat_getlwp          401
+#define __NR_HPUX_lwp_exit              402
+#define __NR_HPUX_lwp_continue          403
+#define __NR_HPUX_getacl                404
+#define __NR_HPUX_fgetacl               405
+#define __NR_HPUX_setacl                406
+#define __NR_HPUX_fsetacl               407
+#define __NR_HPUX_getaccess             408
+#define __NR_HPUX_lwp_mutex_init        409
+#define __NR_HPUX_lwp_mutex_lock_sys    410
+#define __NR_HPUX_lwp_mutex_unlock      411
+#define __NR_HPUX_lwp_cond_init         412
+#define __NR_HPUX_lwp_cond_signal       413
+#define __NR_HPUX_lwp_cond_broadcast    414
+#define __NR_HPUX_lwp_cond_wait_sys     415
+#define __NR_HPUX_lwp_getscheduler      416
+#define __NR_HPUX_lwp_setscheduler      417
+#define __NR_HPUX_lwp_getstate          418
+#define __NR_HPUX_lwp_setstate          419
+#define __NR_HPUX_lwp_detach            420
+#define __NR_HPUX_mlock                 421
+#define __NR_HPUX_munlock               422
+#define __NR_HPUX_mlockall              423
+#define __NR_HPUX_munlockall            424
+#define __NR_HPUX_shm_open              425
+#define __NR_HPUX_shm_unlink            426
+#define __NR_HPUX_sigqueue              427
+#define __NR_HPUX_sigwaitinfo           428
+#define __NR_HPUX_sigtimedwait          429
+#define __NR_HPUX_sigwait               430
+#define __NR_HPUX_aio_read              431
+#define __NR_HPUX_aio_write             432
+#define __NR_HPUX_lio_listio            433
+#define __NR_HPUX_aio_error             434
+#define __NR_HPUX_aio_return            435
+#define __NR_HPUX_aio_cancel            436
+#define __NR_HPUX_aio_suspend           437
+#define __NR_HPUX_aio_fsync             438
+#define __NR_HPUX_mq_open               439
+#define __NR_HPUX_mq_close              440
+#define __NR_HPUX_mq_unlink             441
+#define __NR_HPUX_mq_send               442
+#define __NR_HPUX_mq_receive            443
+#define __NR_HPUX_mq_notify             444
+#define __NR_HPUX_mq_setattr            445
+#define __NR_HPUX_mq_getattr            446
+#define __NR_HPUX_ksem_open             447
+#define __NR_HPUX_ksem_unlink           448
+#define __NR_HPUX_ksem_close            449
+#define __NR_HPUX_ksem_post             450
+#define __NR_HPUX_ksem_wait             451
+#define __NR_HPUX_ksem_read             452
+#define __NR_HPUX_ksem_trywait          453
+#define __NR_HPUX_lwp_rwlock_init       454
+#define __NR_HPUX_lwp_rwlock_destroy    455
+#define __NR_HPUX_lwp_rwlock_rdlock_sys 456
+#define __NR_HPUX_lwp_rwlock_wrlock_sys 457
+#define __NR_HPUX_lwp_rwlock_tryrdlock  458
+#define __NR_HPUX_lwp_rwlock_trywrlock  459
+#define __NR_HPUX_lwp_rwlock_unlock     460
+#define __NR_HPUX_ttrace                461
+#define __NR_HPUX_ttrace_wait           462
+#define __NR_HPUX_lf_wire_mem           463
+#define __NR_HPUX_lf_unwire_mem         464
+#define __NR_HPUX_lf_send_pin_map       465
+#define __NR_HPUX_lf_free_buf           466
+#define __NR_HPUX_lf_wait_nq            467
+#define __NR_HPUX_lf_wakeup_conn_q      468
+#define __NR_HPUX_lf_unused             469
+#define __NR_HPUX_lwp_sema_init         470
+#define __NR_HPUX_lwp_sema_post         471
+#define __NR_HPUX_lwp_sema_wait         472
+#define __NR_HPUX_lwp_sema_trywait      473
+#define __NR_HPUX_lwp_sema_destroy      474
+#define __NR_HPUX_statvfs64             475
+#define __NR_HPUX_fstatvfs64            476
+#define __NR_HPUX_msh_register          477
+#define __NR_HPUX_ptrace64              478
+#define __NR_HPUX_sendfile              479
+#define __NR_HPUX_sendpath              480
+#define __NR_HPUX_sendfile64            481
+#define __NR_HPUX_sendpath64            482
+#define __NR_HPUX_modload               483
+#define __NR_HPUX_moduload              484
+#define __NR_HPUX_modpath               485
+#define __NR_HPUX_getksym               486
+#define __NR_HPUX_modadm                487
+#define __NR_HPUX_modstat               488
+#define __NR_HPUX_lwp_detached_exit     489
+#define __NR_HPUX_crashconf             490
+#define __NR_HPUX_siginhibit            491
+#define __NR_HPUX_sigenable             492
+#define __NR_HPUX_spuctl                493
+#define __NR_HPUX_zerokernelsum         494
+#define __NR_HPUX_nfs_kstat             495
+#define __NR_HPUX_aio_read64            496
+#define __NR_HPUX_aio_write64           497
+#define __NR_HPUX_aio_error64           498
+#define __NR_HPUX_aio_return64          499
+#define __NR_HPUX_aio_cancel64          500
+#define __NR_HPUX_aio_suspend64         501
+#define __NR_HPUX_aio_fsync64           502
+#define __NR_HPUX_lio_listio64          503
+#define __NR_HPUX_recv2                 504
+#define __NR_HPUX_recvfrom2             505
+#define __NR_HPUX_send2                 506
+#define __NR_HPUX_sendto2               507
+#define __NR_HPUX_acl                   508
+#define __NR_HPUX___cnx_p2p_ctl         509
+#define __NR_HPUX___cnx_gsched_ctl      510
+#define __NR_HPUX___cnx_pmon_ctl        511
+
+#define __NR_HPUX_syscalls		512
+
+/*
+ * Linux system call numbers.
+ *
+ * Cary Coutant says that we should just use another syscall gateway
+ * page to avoid clashing with the HPUX space, and I think he's right:
+ * it will would keep a branch out of our syscall entry path, at the
+ * very least.  If we decide to change it later, we can ``just'' tweak
+ * the LINUX_GATEWAY_ADDR define at the bottom and make __NR_Linux be
+ * 1024 or something.  Oh, and recompile libc. =)
+ *
+ * 64-bit HPUX binaries get the syscall gateway address passed in a register
+ * from the kernel at startup, which seems a sane strategy.
+ */
+
+#define __NR_Linux                0
+#define __NR_restart_syscall      (__NR_Linux + 0)
+#define __NR_exit                 (__NR_Linux + 1)
+#define __NR_fork                 (__NR_Linux + 2)
+#define __NR_read                 (__NR_Linux + 3)
+#define __NR_write                (__NR_Linux + 4)
+#define __NR_open                 (__NR_Linux + 5)
+#define __NR_close                (__NR_Linux + 6)
+#define __NR_waitpid              (__NR_Linux + 7)
+#define __NR_creat                (__NR_Linux + 8)
+#define __NR_link                 (__NR_Linux + 9)
+#define __NR_unlink              (__NR_Linux + 10)
+#define __NR_execve              (__NR_Linux + 11)
+#define __NR_chdir               (__NR_Linux + 12)
+#define __NR_time                (__NR_Linux + 13)
+#define __NR_mknod               (__NR_Linux + 14)
+#define __NR_chmod               (__NR_Linux + 15)
+#define __NR_lchown              (__NR_Linux + 16)
+#define __NR_socket              (__NR_Linux + 17)
+#define __NR_stat                (__NR_Linux + 18)
+#define __NR_lseek               (__NR_Linux + 19)
+#define __NR_getpid              (__NR_Linux + 20)
+#define __NR_mount               (__NR_Linux + 21)
+#define __NR_bind                (__NR_Linux + 22)
+#define __NR_setuid              (__NR_Linux + 23)
+#define __NR_getuid              (__NR_Linux + 24)
+#define __NR_stime               (__NR_Linux + 25)
+#define __NR_ptrace              (__NR_Linux + 26)
+#define __NR_alarm               (__NR_Linux + 27)
+#define __NR_fstat               (__NR_Linux + 28)
+#define __NR_pause               (__NR_Linux + 29)
+#define __NR_utime               (__NR_Linux + 30)
+#define __NR_connect             (__NR_Linux + 31)
+#define __NR_listen              (__NR_Linux + 32)
+#define __NR_access              (__NR_Linux + 33)
+#define __NR_nice                (__NR_Linux + 34)
+#define __NR_accept              (__NR_Linux + 35)
+#define __NR_sync                (__NR_Linux + 36)
+#define __NR_kill                (__NR_Linux + 37)
+#define __NR_rename              (__NR_Linux + 38)
+#define __NR_mkdir               (__NR_Linux + 39)
+#define __NR_rmdir               (__NR_Linux + 40)
+#define __NR_dup                 (__NR_Linux + 41)
+#define __NR_pipe                (__NR_Linux + 42)
+#define __NR_times               (__NR_Linux + 43)
+#define __NR_getsockname         (__NR_Linux + 44)
+#define __NR_brk                 (__NR_Linux + 45)
+#define __NR_setgid              (__NR_Linux + 46)
+#define __NR_getgid              (__NR_Linux + 47)
+#define __NR_signal              (__NR_Linux + 48)
+#define __NR_geteuid             (__NR_Linux + 49)
+#define __NR_getegid             (__NR_Linux + 50)
+#define __NR_acct                (__NR_Linux + 51)
+#define __NR_umount2             (__NR_Linux + 52)
+#define __NR_getpeername         (__NR_Linux + 53)
+#define __NR_ioctl               (__NR_Linux + 54)
+#define __NR_fcntl               (__NR_Linux + 55)
+#define __NR_socketpair          (__NR_Linux + 56)
+#define __NR_setpgid             (__NR_Linux + 57)
+#define __NR_send                (__NR_Linux + 58)
+#define __NR_uname               (__NR_Linux + 59)
+#define __NR_umask               (__NR_Linux + 60)
+#define __NR_chroot              (__NR_Linux + 61)
+#define __NR_ustat               (__NR_Linux + 62)
+#define __NR_dup2                (__NR_Linux + 63)
+#define __NR_getppid             (__NR_Linux + 64)
+#define __NR_getpgrp             (__NR_Linux + 65)
+#define __NR_setsid              (__NR_Linux + 66)
+#define __NR_pivot_root          (__NR_Linux + 67)
+#define __NR_sgetmask            (__NR_Linux + 68)
+#define __NR_ssetmask            (__NR_Linux + 69)
+#define __NR_setreuid            (__NR_Linux + 70)
+#define __NR_setregid            (__NR_Linux + 71)
+#define __NR_mincore             (__NR_Linux + 72)
+#define __NR_sigpending          (__NR_Linux + 73)
+#define __NR_sethostname         (__NR_Linux + 74)
+#define __NR_setrlimit           (__NR_Linux + 75)
+#define __NR_getrlimit           (__NR_Linux + 76)
+#define __NR_getrusage           (__NR_Linux + 77)
+#define __NR_gettimeofday        (__NR_Linux + 78)
+#define __NR_settimeofday        (__NR_Linux + 79)
+#define __NR_getgroups           (__NR_Linux + 80)
+#define __NR_setgroups           (__NR_Linux + 81)
+#define __NR_sendto              (__NR_Linux + 82)
+#define __NR_symlink             (__NR_Linux + 83)
+#define __NR_lstat               (__NR_Linux + 84)
+#define __NR_readlink            (__NR_Linux + 85)
+#define __NR_uselib              (__NR_Linux + 86)
+#define __NR_swapon              (__NR_Linux + 87)
+#define __NR_reboot              (__NR_Linux + 88)
+#define __NR_mmap2             (__NR_Linux + 89)
+#define __NR_mmap                (__NR_Linux + 90)
+#define __NR_munmap              (__NR_Linux + 91)
+#define __NR_truncate            (__NR_Linux + 92)
+#define __NR_ftruncate           (__NR_Linux + 93)
+#define __NR_fchmod              (__NR_Linux + 94)
+#define __NR_fchown              (__NR_Linux + 95)
+#define __NR_getpriority         (__NR_Linux + 96)
+#define __NR_setpriority         (__NR_Linux + 97)
+#define __NR_recv                (__NR_Linux + 98)
+#define __NR_statfs              (__NR_Linux + 99)
+#define __NR_fstatfs            (__NR_Linux + 100)
+#define __NR_stat64           (__NR_Linux + 101)
+/* #define __NR_socketcall         (__NR_Linux + 102) */
+#define __NR_syslog             (__NR_Linux + 103)
+#define __NR_setitimer          (__NR_Linux + 104)
+#define __NR_getitimer          (__NR_Linux + 105)
+#define __NR_capget             (__NR_Linux + 106)
+#define __NR_capset             (__NR_Linux + 107)
+#define __NR_pread64            (__NR_Linux + 108)
+#define __NR_pwrite64           (__NR_Linux + 109)
+#define __NR_getcwd             (__NR_Linux + 110)
+#define __NR_vhangup            (__NR_Linux + 111)
+#define __NR_fstat64            (__NR_Linux + 112)
+#define __NR_vfork              (__NR_Linux + 113)
+#define __NR_wait4              (__NR_Linux + 114)
+#define __NR_swapoff            (__NR_Linux + 115)
+#define __NR_sysinfo            (__NR_Linux + 116)
+#define __NR_shutdown           (__NR_Linux + 117)
+#define __NR_fsync              (__NR_Linux + 118)
+#define __NR_madvise            (__NR_Linux + 119)
+#define __NR_clone              (__NR_Linux + 120)
+#define __NR_setdomainname      (__NR_Linux + 121)
+#define __NR_sendfile           (__NR_Linux + 122)
+#define __NR_recvfrom           (__NR_Linux + 123)
+#define __NR_adjtimex           (__NR_Linux + 124)
+#define __NR_mprotect           (__NR_Linux + 125)
+#define __NR_sigprocmask        (__NR_Linux + 126)
+#define __NR_create_module      (__NR_Linux + 127)
+#define __NR_init_module        (__NR_Linux + 128)
+#define __NR_delete_module      (__NR_Linux + 129)
+#define __NR_get_kernel_syms    (__NR_Linux + 130)
+#define __NR_quotactl           (__NR_Linux + 131)
+#define __NR_getpgid            (__NR_Linux + 132)
+#define __NR_fchdir             (__NR_Linux + 133)
+#define __NR_bdflush            (__NR_Linux + 134)
+#define __NR_sysfs              (__NR_Linux + 135)
+#define __NR_personality        (__NR_Linux + 136)
+#define __NR_afs_syscall        (__NR_Linux + 137) /* Syscall for Andrew File System */
+#define __NR_setfsuid           (__NR_Linux + 138)
+#define __NR_setfsgid           (__NR_Linux + 139)
+#define __NR__llseek            (__NR_Linux + 140)
+#define __NR_getdents           (__NR_Linux + 141)
+#define __NR__newselect         (__NR_Linux + 142)
+#define __NR_flock              (__NR_Linux + 143)
+#define __NR_msync              (__NR_Linux + 144)
+#define __NR_readv              (__NR_Linux + 145)
+#define __NR_writev             (__NR_Linux + 146)
+#define __NR_getsid             (__NR_Linux + 147)
+#define __NR_fdatasync          (__NR_Linux + 148)
+#define __NR__sysctl            (__NR_Linux + 149)
+#define __NR_mlock              (__NR_Linux + 150)
+#define __NR_munlock            (__NR_Linux + 151)
+#define __NR_mlockall           (__NR_Linux + 152)
+#define __NR_munlockall         (__NR_Linux + 153)
+#define __NR_sched_setparam             (__NR_Linux + 154)
+#define __NR_sched_getparam             (__NR_Linux + 155)
+#define __NR_sched_setscheduler         (__NR_Linux + 156)
+#define __NR_sched_getscheduler         (__NR_Linux + 157)
+#define __NR_sched_yield                (__NR_Linux + 158)
+#define __NR_sched_get_priority_max     (__NR_Linux + 159)
+#define __NR_sched_get_priority_min     (__NR_Linux + 160)
+#define __NR_sched_rr_get_interval      (__NR_Linux + 161)
+#define __NR_nanosleep          (__NR_Linux + 162)
+#define __NR_mremap             (__NR_Linux + 163)
+#define __NR_setresuid          (__NR_Linux + 164)
+#define __NR_getresuid          (__NR_Linux + 165)
+#define __NR_sigaltstack        (__NR_Linux + 166)
+#define __NR_query_module       (__NR_Linux + 167)
+#define __NR_poll               (__NR_Linux + 168)
+#define __NR_nfsservctl         (__NR_Linux + 169)
+#define __NR_setresgid          (__NR_Linux + 170)
+#define __NR_getresgid          (__NR_Linux + 171)
+#define __NR_prctl              (__NR_Linux + 172)
+#define __NR_rt_sigreturn       (__NR_Linux + 173)
+#define __NR_rt_sigaction       (__NR_Linux + 174)
+#define __NR_rt_sigprocmask     (__NR_Linux + 175)
+#define __NR_rt_sigpending      (__NR_Linux + 176)
+#define __NR_rt_sigtimedwait    (__NR_Linux + 177)
+#define __NR_rt_sigqueueinfo    (__NR_Linux + 178)
+#define __NR_rt_sigsuspend      (__NR_Linux + 179)
+#define __NR_chown              (__NR_Linux + 180)
+#define __NR_setsockopt         (__NR_Linux + 181)
+#define __NR_getsockopt         (__NR_Linux + 182)
+#define __NR_sendmsg            (__NR_Linux + 183)
+#define __NR_recvmsg            (__NR_Linux + 184)
+#define __NR_semop              (__NR_Linux + 185)
+#define __NR_semget             (__NR_Linux + 186)
+#define __NR_semctl             (__NR_Linux + 187)
+#define __NR_msgsnd             (__NR_Linux + 188)
+#define __NR_msgrcv             (__NR_Linux + 189)
+#define __NR_msgget             (__NR_Linux + 190)
+#define __NR_msgctl             (__NR_Linux + 191)
+#define __NR_shmat              (__NR_Linux + 192)
+#define __NR_shmdt              (__NR_Linux + 193)
+#define __NR_shmget             (__NR_Linux + 194)
+#define __NR_shmctl             (__NR_Linux + 195)
+
+#define __NR_getpmsg		(__NR_Linux + 196) /* Somebody *wants* streams? */
+#define __NR_putpmsg		(__NR_Linux + 197)
+
+#define __NR_lstat64            (__NR_Linux + 198)
+#define __NR_truncate64         (__NR_Linux + 199)
+#define __NR_ftruncate64        (__NR_Linux + 200)
+#define __NR_getdents64         (__NR_Linux + 201)
+#define __NR_fcntl64            (__NR_Linux + 202)
+#define __NR_attrctl            (__NR_Linux + 203)
+#define __NR_acl_get            (__NR_Linux + 204)
+#define __NR_acl_set            (__NR_Linux + 205)
+#define __NR_gettid             (__NR_Linux + 206)
+#define __NR_readahead          (__NR_Linux + 207)
+#define __NR_tkill              (__NR_Linux + 208)
+#define __NR_sendfile64         (__NR_Linux + 209)
+#define __NR_futex              (__NR_Linux + 210)
+#define __NR_sched_setaffinity  (__NR_Linux + 211)
+#define __NR_sched_getaffinity  (__NR_Linux + 212)
+#define __NR_set_thread_area    (__NR_Linux + 213)
+#define __NR_get_thread_area    (__NR_Linux + 214)
+#define __NR_io_setup           (__NR_Linux + 215)
+#define __NR_io_destroy         (__NR_Linux + 216)
+#define __NR_io_getevents       (__NR_Linux + 217)
+#define __NR_io_submit          (__NR_Linux + 218)
+#define __NR_io_cancel          (__NR_Linux + 219)
+#define __NR_alloc_hugepages    (__NR_Linux + 220)
+#define __NR_free_hugepages     (__NR_Linux + 221)
+#define __NR_exit_group         (__NR_Linux + 222)
+#define __NR_lookup_dcookie     (__NR_Linux + 223)
+#define __NR_epoll_create       (__NR_Linux + 224)
+#define __NR_epoll_ctl          (__NR_Linux + 225)
+#define __NR_epoll_wait         (__NR_Linux + 226)
+#define __NR_remap_file_pages   (__NR_Linux + 227)
+#define __NR_semtimedop         (__NR_Linux + 228)
+#define __NR_mq_open            (__NR_Linux + 229)
+#define __NR_mq_unlink          (__NR_Linux + 230)
+#define __NR_mq_timedsend       (__NR_Linux + 231)
+#define __NR_mq_timedreceive    (__NR_Linux + 232)
+#define __NR_mq_notify          (__NR_Linux + 233)
+#define __NR_mq_getsetattr      (__NR_Linux + 234)
+#define __NR_waitid		(__NR_Linux + 235)
+#define __NR_fadvise64_64	(__NR_Linux + 236)
+#define __NR_set_tid_address	(__NR_Linux + 237)
+#define __NR_setxattr		(__NR_Linux + 238)
+#define __NR_lsetxattr		(__NR_Linux + 239)
+#define __NR_fsetxattr		(__NR_Linux + 240)
+#define __NR_getxattr		(__NR_Linux + 241)
+#define __NR_lgetxattr		(__NR_Linux + 242)
+#define __NR_fgetxattr		(__NR_Linux + 243)
+#define __NR_listxattr		(__NR_Linux + 244)
+#define __NR_llistxattr		(__NR_Linux + 245)
+#define __NR_flistxattr		(__NR_Linux + 246)
+#define __NR_removexattr	(__NR_Linux + 247)
+#define __NR_lremovexattr	(__NR_Linux + 248)
+#define __NR_fremovexattr	(__NR_Linux + 249)
+#define __NR_timer_create	(__NR_Linux + 250)
+#define __NR_timer_settime	(__NR_Linux + 251)
+#define __NR_timer_gettime	(__NR_Linux + 252)
+#define __NR_timer_getoverrun	(__NR_Linux + 253)
+#define __NR_timer_delete	(__NR_Linux + 254)
+#define __NR_clock_settime	(__NR_Linux + 255)
+#define __NR_clock_gettime	(__NR_Linux + 256)
+#define __NR_clock_getres	(__NR_Linux + 257)
+#define __NR_clock_nanosleep	(__NR_Linux + 258)
+#define __NR_tgkill		(__NR_Linux + 259)
+#define __NR_mbind		(__NR_Linux + 260)
+#define __NR_get_mempolicy	(__NR_Linux + 261)
+#define __NR_set_mempolicy	(__NR_Linux + 262)
+#define __NR_vserver		(__NR_Linux + 263)
+#define __NR_add_key		(__NR_Linux + 264)
+#define __NR_request_key	(__NR_Linux + 265)
+#define __NR_keyctl		(__NR_Linux + 266)
+#define __NR_ioprio_set		(__NR_Linux + 267)
+#define __NR_ioprio_get		(__NR_Linux + 268)
+#define __NR_inotify_init	(__NR_Linux + 269)
+#define __NR_inotify_add_watch	(__NR_Linux + 270)
+#define __NR_inotify_rm_watch	(__NR_Linux + 271)
+#define __NR_migrate_pages	(__NR_Linux + 272)
+#define __NR_pselect6		(__NR_Linux + 273)
+#define __NR_ppoll		(__NR_Linux + 274)
+#define __NR_openat		(__NR_Linux + 275)
+#define __NR_mkdirat		(__NR_Linux + 276)
+#define __NR_mknodat		(__NR_Linux + 277)
+#define __NR_fchownat		(__NR_Linux + 278)
+#define __NR_futimesat		(__NR_Linux + 279)
+#define __NR_fstatat64		(__NR_Linux + 280)
+#define __NR_unlinkat		(__NR_Linux + 281)
+#define __NR_renameat		(__NR_Linux + 282)
+#define __NR_linkat		(__NR_Linux + 283)
+#define __NR_symlinkat		(__NR_Linux + 284)
+#define __NR_readlinkat		(__NR_Linux + 285)
+#define __NR_fchmodat		(__NR_Linux + 286)
+#define __NR_faccessat		(__NR_Linux + 287)
+#define __NR_unshare		(__NR_Linux + 288)
+#define __NR_set_robust_list	(__NR_Linux + 289)
+#define __NR_get_robust_list	(__NR_Linux + 290)
+#define __NR_splice		(__NR_Linux + 291)
+#define __NR_sync_file_range	(__NR_Linux + 292)
+#define __NR_tee		(__NR_Linux + 293)
+#define __NR_vmsplice		(__NR_Linux + 294)
+#define __NR_move_pages		(__NR_Linux + 295)
+#define __NR_getcpu		(__NR_Linux + 296)
+#define __NR_epoll_pwait	(__NR_Linux + 297)
+#define __NR_statfs64		(__NR_Linux + 298)
+#define __NR_fstatfs64		(__NR_Linux + 299)
+#define __NR_kexec_load		(__NR_Linux + 300)
+#define __NR_utimensat		(__NR_Linux + 301)
+#define __NR_signalfd		(__NR_Linux + 302)
+#define __NR_timerfd		(__NR_Linux + 303)
+#define __NR_eventfd		(__NR_Linux + 304)
+#define __NR_fallocate		(__NR_Linux + 305)
+#define __NR_timerfd_create	(__NR_Linux + 306)
+#define __NR_timerfd_settime	(__NR_Linux + 307)
+#define __NR_timerfd_gettime	(__NR_Linux + 308)
+#define __NR_signalfd4		(__NR_Linux + 309)
+#define __NR_eventfd2		(__NR_Linux + 310)
+#define __NR_epoll_create1	(__NR_Linux + 311)
+#define __NR_dup3		(__NR_Linux + 312)
+#define __NR_pipe2		(__NR_Linux + 313)
+#define __NR_inotify_init1	(__NR_Linux + 314)
+
+#define __NR_Linux_syscalls	(__NR_inotify_init1 + 1)
+
+
+#define __IGNORE_select		/* newselect */
+#define __IGNORE_fadvise64	/* fadvise64_64 */
+#define __IGNORE_utimes		/* utime */
+
+
+#define HPUX_GATEWAY_ADDR       0xC0000004
+#define LINUX_GATEWAY_ADDR      0x100
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define SYS_ify(syscall_name)   __NR_##syscall_name
+
+#ifndef ASM_LINE_SEP
+# define ASM_LINE_SEP ;
+#endif
+
+/* Definition taken from glibc 2.3.3
+ * sysdeps/unix/sysv/linux/hppa/sysdep.h
+ */
+
+#ifdef PIC
+/* WARNING: CANNOT BE USED IN A NOP! */
+# define K_STW_ASM_PIC	"       copy %%r19, %%r4\n"
+# define K_LDW_ASM_PIC	"       copy %%r4, %%r19\n"
+# define K_USING_GR4	"%r4",
+#else
+# define K_STW_ASM_PIC	" \n"
+# define K_LDW_ASM_PIC	" \n"
+# define K_USING_GR4
+#endif
+
+/* GCC has to be warned that a syscall may clobber all the ABI
+   registers listed as "caller-saves", see page 8, Table 2
+   in section 2.2.6 of the PA-RISC RUN-TIME architecture
+   document. However! r28 is the result and will conflict with
+   the clobber list so it is left out. Also the input arguments
+   registers r20 -> r26 will conflict with the list so they
+   are treated specially. Although r19 is clobbered by the syscall
+   we cannot say this because it would violate ABI, thus we say
+   r4 is clobbered and use that register to save/restore r19
+   across the syscall. */
+
+#define K_CALL_CLOB_REGS "%r1", "%r2", K_USING_GR4 \
+	        	 "%r20", "%r29", "%r31"
+
+#undef K_INLINE_SYSCALL
+#define K_INLINE_SYSCALL(name, nr, args...)	({			\
+	long __sys_res;							\
+	{								\
+		register unsigned long __res __asm__("r28");		\
+		K_LOAD_ARGS_##nr(args)					\
+		/* FIXME: HACK stw/ldw r19 around syscall */		\
+		__asm__ volatile(					\
+			K_STW_ASM_PIC					\
+			"	ble  0x100(%%sr2, %%r0)\n"		\
+			"	ldi %1, %%r20\n"			\
+			K_LDW_ASM_PIC					\
+			: "=r" (__res)					\
+			: "i" (SYS_ify(name)) K_ASM_ARGS_##nr   	\
+			: "memory", K_CALL_CLOB_REGS K_CLOB_ARGS_##nr	\
+		);							\
+		__sys_res = (long)__res;				\
+	}								\
+	if ( (unsigned long)__sys_res >= (unsigned long)-4095 ){	\
+		errno = -__sys_res;		        		\
+		__sys_res = -1;						\
+	}								\
+	__sys_res;							\
+})
+
+#define K_LOAD_ARGS_0()
+#define K_LOAD_ARGS_1(r26)					\
+	register unsigned long __r26 __asm__("r26") = (unsigned long)(r26);   \
+	K_LOAD_ARGS_0()
+#define K_LOAD_ARGS_2(r26,r25)					\
+	register unsigned long __r25 __asm__("r25") = (unsigned long)(r25);   \
+	K_LOAD_ARGS_1(r26)
+#define K_LOAD_ARGS_3(r26,r25,r24)				\
+	register unsigned long __r24 __asm__("r24") = (unsigned long)(r24);   \
+	K_LOAD_ARGS_2(r26,r25)
+#define K_LOAD_ARGS_4(r26,r25,r24,r23)				\
+	register unsigned long __r23 __asm__("r23") = (unsigned long)(r23);   \
+	K_LOAD_ARGS_3(r26,r25,r24)
+#define K_LOAD_ARGS_5(r26,r25,r24,r23,r22)			\
+	register unsigned long __r22 __asm__("r22") = (unsigned long)(r22);   \
+	K_LOAD_ARGS_4(r26,r25,r24,r23)
+#define K_LOAD_ARGS_6(r26,r25,r24,r23,r22,r21)			\
+	register unsigned long __r21 __asm__("r21") = (unsigned long)(r21);   \
+	K_LOAD_ARGS_5(r26,r25,r24,r23,r22)
+
+/* Even with zero args we use r20 for the syscall number */
+#define K_ASM_ARGS_0
+#define K_ASM_ARGS_1 K_ASM_ARGS_0, "r" (__r26)
+#define K_ASM_ARGS_2 K_ASM_ARGS_1, "r" (__r25)
+#define K_ASM_ARGS_3 K_ASM_ARGS_2, "r" (__r24)
+#define K_ASM_ARGS_4 K_ASM_ARGS_3, "r" (__r23)
+#define K_ASM_ARGS_5 K_ASM_ARGS_4, "r" (__r22)
+#define K_ASM_ARGS_6 K_ASM_ARGS_5, "r" (__r21)
+
+/* The registers not listed as inputs but clobbered */
+#define K_CLOB_ARGS_6
+#define K_CLOB_ARGS_5 K_CLOB_ARGS_6, "%r21"
+#define K_CLOB_ARGS_4 K_CLOB_ARGS_5, "%r22"
+#define K_CLOB_ARGS_3 K_CLOB_ARGS_4, "%r23"
+#define K_CLOB_ARGS_2 K_CLOB_ARGS_3, "%r24"
+#define K_CLOB_ARGS_1 K_CLOB_ARGS_2, "%r25"
+#define K_CLOB_ARGS_0 K_CLOB_ARGS_1, "%r26"
+
+#define _syscall0(type,name)						\
+type name(void)								\
+{									\
+    return K_INLINE_SYSCALL(name, 0);	                                \
+}
+
+#define _syscall1(type,name,type1,arg1)					\
+type name(type1 arg1)							\
+{									\
+    return K_INLINE_SYSCALL(name, 1, arg1);	                        \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2)			\
+type name(type1 arg1, type2 arg2)					\
+{									\
+    return K_INLINE_SYSCALL(name, 2, arg1, arg2);	                \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3)		\
+type name(type1 arg1, type2 arg2, type3 arg3)				\
+{									\
+    return K_INLINE_SYSCALL(name, 3, arg1, arg2, arg3);	                \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4)		\
+{									\
+    return K_INLINE_SYSCALL(name, 4, arg1, arg2, arg3, arg4);	        \
+}
+
+/* select takes 5 arguments */
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5)	\
+{									\
+    return K_INLINE_SYSCALL(name, 5, arg1, arg2, arg3, arg4, arg5);	\
+}
+
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+
+#endif /* __ASSEMBLY__ */
+
+#undef STR
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_PARISC_UNISTD_H_ */
diff --git a/arch/parisc/include/asm/unwind.h b/arch/parisc/include/asm/unwind.h
new file mode 100644
index 0000000..52482e4
--- /dev/null
+++ b/arch/parisc/include/asm/unwind.h
@@ -0,0 +1,79 @@
+#ifndef _UNWIND_H_
+#define _UNWIND_H_
+
+#include <linux/list.h>
+
+/* From ABI specifications */
+struct unwind_table_entry {
+	unsigned int region_start;
+	unsigned int region_end;
+	unsigned int Cannot_unwind:1; /* 0 */
+	unsigned int Millicode:1;	/* 1 */
+	unsigned int Millicode_save_sr0:1;	/* 2 */
+	unsigned int Region_description:2;	/* 3..4 */
+	unsigned int reserved1:1;	/* 5 */
+	unsigned int Entry_SR:1;	/* 6 */
+	unsigned int Entry_FR:4;	/* number saved *//* 7..10 */
+	unsigned int Entry_GR:5;	/* number saved *//* 11..15 */
+	unsigned int Args_stored:1;	/* 16 */
+	unsigned int Variable_Frame:1;	/* 17 */
+	unsigned int Separate_Package_Body:1;	/* 18 */
+	unsigned int Frame_Extension_Millicode:1;	/* 19 */
+	unsigned int Stack_Overflow_Check:1;	/* 20 */
+	unsigned int Two_Instruction_SP_Increment:1;	/* 21 */
+	unsigned int Ada_Region:1;	/* 22 */
+	unsigned int cxx_info:1;	/* 23 */
+	unsigned int cxx_try_catch:1;	/* 24 */
+	unsigned int sched_entry_seq:1;	/* 25 */
+	unsigned int reserved2:1;	/* 26 */
+	unsigned int Save_SP:1;	/* 27 */
+	unsigned int Save_RP:1;	/* 28 */
+	unsigned int Save_MRP_in_frame:1;	/* 29 */
+	unsigned int extn_ptr_defined:1;	/* 30 */
+	unsigned int Cleanup_defined:1;	/* 31 */
+	
+	unsigned int MPE_XL_interrupt_marker:1;	/* 0 */
+	unsigned int HP_UX_interrupt_marker:1;	/* 1 */
+	unsigned int Large_frame:1;	/* 2 */
+	unsigned int Pseudo_SP_Set:1;	/* 3 */
+	unsigned int reserved4:1;	/* 4 */
+	unsigned int Total_frame_size:27;	/* 5..31 */
+};
+
+struct unwind_table {
+	struct list_head list;
+	const char *name;
+	unsigned long gp;
+	unsigned long base_addr;
+	unsigned long start;
+	unsigned long end;
+	const struct unwind_table_entry *table;
+	unsigned long length;
+};
+
+struct unwind_frame_info {
+	struct task_struct *t;
+	/* Eventually we would like to be able to get at any of the registers
+	   available; but for now we only try to get the sp and ip for each
+	   frame */
+	/* struct pt_regs regs; */
+	unsigned long sp, ip, rp, r31;
+	unsigned long prev_sp, prev_ip;
+};
+
+struct unwind_table *
+unwind_table_add(const char *name, unsigned long base_addr, 
+		 unsigned long gp, void *start, void *end);
+void
+unwind_table_remove(struct unwind_table *table);
+
+void unwind_frame_init(struct unwind_frame_info *info, struct task_struct *t, 
+		       struct pt_regs *regs);
+void unwind_frame_init_from_blocked_task(struct unwind_frame_info *info, struct task_struct *t);
+void unwind_frame_init_running(struct unwind_frame_info *info, struct pt_regs *regs);
+int unwind_once(struct unwind_frame_info *info);
+int unwind_to_user(struct unwind_frame_info *info);
+
+int unwind_init(void);
+
+#endif
diff --git a/arch/parisc/include/asm/user.h b/arch/parisc/include/asm/user.h
new file mode 100644
index 0000000..8022475
--- /dev/null
+++ b/arch/parisc/include/asm/user.h
@@ -0,0 +1,5 @@
+/* This file should not exist, but lots of generic code still includes
+   it. It's a hangover from old a.out days and the traditional core
+   dump format.  We are ELF-only, and so are our core dumps.  If we
+   need to support HP/UX core format then we'll do it here
+   eventually. */
diff --git a/arch/parisc/include/asm/vga.h b/arch/parisc/include/asm/vga.h
new file mode 100644
index 0000000..171399a
--- /dev/null
+++ b/arch/parisc/include/asm/vga.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_PARISC_VGA_H__
+#define __ASM_PARISC_VGA_H__
+
+/* nothing */
+
+#endif /* __ASM_PARISC_VGA_H__ */
diff --git a/arch/parisc/include/asm/xor.h b/arch/parisc/include/asm/xor.h
new file mode 100644
index 0000000..c82eb12
--- /dev/null
+++ b/arch/parisc/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/parisc/kernel/.gitignore b/arch/parisc/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/arch/parisc/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 3efc0b7..699cf8e 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -290,5 +290,8 @@ int main(void)
 	DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip));
 	DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space));
 	DEFINE(EXCDATA_ADDR, offsetof(struct exception_data, fault_addr));
+	BLANK();
+	DEFINE(ASM_PDC_RESULT_SIZE, NUM_PDC_RESULT * sizeof(unsigned long));
+	BLANK();
 	return 0;
 }
diff --git a/arch/parisc/kernel/binfmt_elf32.c b/arch/parisc/kernel/binfmt_elf32.c
index ecb10a4..f61692d 100644
--- a/arch/parisc/kernel/binfmt_elf32.c
+++ b/arch/parisc/kernel/binfmt_elf32.c
@@ -85,7 +85,7 @@ struct elf_prpsinfo32
  * could set a processor dependent flag in the thread_struct.
  */
 
-#define SET_PERSONALITY(ex, ibcs2) \
+#define SET_PERSONALITY(ex) \
 	set_thread_flag(TIF_32BIT); \
 	current->thread.map_base = DEFAULT_MAP_BASE32; \
 	current->thread.task_size = DEFAULT_TASK_SIZE32 \
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index 7177a6c..03f26bd 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -71,8 +71,8 @@
 #include <asm/processor.h>	/* for boot_cpu_data */
 
 static DEFINE_SPINLOCK(pdc_lock);
-static unsigned long pdc_result[32] __attribute__ ((aligned (8)));
-static unsigned long pdc_result2[32] __attribute__ ((aligned (8)));
+extern unsigned long pdc_result[NUM_PDC_RESULT];
+extern unsigned long pdc_result2[NUM_PDC_RESULT];
 
 #ifdef CONFIG_64BIT
 #define WIDE_FIRMWARE 0x1
@@ -150,26 +150,40 @@ static void convert_to_wide(unsigned long *addr)
 #endif
 }
 
+#ifdef CONFIG_64BIT
+void __init set_firmware_width_unlocked(void)
+{
+	int ret;
+
+	ret = mem_pdc_call(PDC_MODEL, PDC_MODEL_CAPABILITIES,
+		__pa(pdc_result), 0);
+	convert_to_wide(pdc_result);
+	if (pdc_result[0] != NARROW_FIRMWARE)
+		parisc_narrow_firmware = 0;
+}
+	
 /**
  * set_firmware_width - Determine if the firmware is wide or narrow.
  * 
- * This function must be called before any pdc_* function that uses the convert_to_wide
- * function.
+ * This function must be called before any pdc_* function that uses the
+ * convert_to_wide function.
  */
 void __init set_firmware_width(void)
 {
-#ifdef CONFIG_64BIT
-	int retval;
 	unsigned long flags;
+	spin_lock_irqsave(&pdc_lock, flags);
+	set_firmware_width_unlocked();
+	spin_unlock_irqrestore(&pdc_lock, flags);
+}
+#else
+void __init set_firmware_width_unlocked(void) {
+	return;
+}
 
-        spin_lock_irqsave(&pdc_lock, flags);
-	retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CAPABILITIES, __pa(pdc_result), 0);
-	convert_to_wide(pdc_result);
-	if(pdc_result[0] != NARROW_FIRMWARE)
-		parisc_narrow_firmware = 0;
-        spin_unlock_irqrestore(&pdc_lock, flags);
-#endif
+void __init set_firmware_width(void) {
+	return;
 }
+#endif /*CONFIG_64BIT*/
 
 /**
  * pdc_emergency_unlock - Unlock the linux pdc lock
@@ -288,6 +302,20 @@ int pdc_chassis_warn(unsigned long *warn)
 	return retval;
 }
 
+int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
+{
+	int ret;
+
+	ret = mem_pdc_call(PDC_COPROC, PDC_COPROC_CFG, __pa(pdc_result));
+	convert_to_wide(pdc_result);
+	pdc_coproc_info->ccr_functional = pdc_result[0];
+	pdc_coproc_info->ccr_present = pdc_result[1];
+	pdc_coproc_info->revision = pdc_result[17];
+	pdc_coproc_info->model = pdc_result[18];
+
+	return ret;
+}
+
 /**
  * pdc_coproc_cfg - To identify coprocessors attached to the processor.
  * @pdc_coproc_info: Return buffer address.
@@ -297,19 +325,14 @@ int pdc_chassis_warn(unsigned long *warn)
  */
 int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
 {
-        int retval;
+	int ret;
 	unsigned long flags;
 
-        spin_lock_irqsave(&pdc_lock, flags);
-        retval = mem_pdc_call(PDC_COPROC, PDC_COPROC_CFG, __pa(pdc_result));
-        convert_to_wide(pdc_result);
-        pdc_coproc_info->ccr_functional = pdc_result[0];
-        pdc_coproc_info->ccr_present = pdc_result[1];
-        pdc_coproc_info->revision = pdc_result[17];
-        pdc_coproc_info->model = pdc_result[18];
-        spin_unlock_irqrestore(&pdc_lock, flags);
+	spin_lock_irqsave(&pdc_lock, flags);
+	ret = pdc_coproc_cfg_unlocked(pdc_coproc_info);
+	spin_unlock_irqrestore(&pdc_lock, flags);
 
-        return retval;
+	return ret;
 }
 
 /**
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index a84e31e..0e3d9f9 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -121,7 +121,7 @@ $pgt_fill_loop:
 	copy		%r0,%r2
 
 	/* And the RFI Target address too */
-	load32		start_kernel,%r11
+	load32		start_parisc,%r11
 
 	/* And the initial task pointer */
 	load32		init_thread_union,%r6
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index 49c6379..90904f9 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -4,6 +4,7 @@
  * Copyright (C) 2000 Hewlett-Packard Co, Linuxcare Inc.
  * Copyright (C) 2000 Matthew Wilcox <matthew@wil.cx>
  * Copyright (C) 2000 David Huggins-Daines <dhd@debian.org>
+ * Copyright (C) 2008 Helge Deller <deller@gmx.de>
  */
 
 #include <linux/kernel.h>
@@ -27,15 +28,149 @@
 /* PSW bits we allow the debugger to modify */
 #define USER_PSW_BITS	(PSW_N | PSW_V | PSW_CB)
 
-#undef DEBUG_PTRACE
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure single step bits etc are not set.
+ */
+void ptrace_disable(struct task_struct *task)
+{
+	task->ptrace &= ~(PT_SINGLESTEP|PT_BLOCKSTEP);
 
-#ifdef DEBUG_PTRACE
-#define DBG(x...)	printk(x)
-#else
-#define DBG(x...)
-#endif
+	/* make sure the trap bits are not set */
+	pa_psw(task)->r = 0;
+	pa_psw(task)->t = 0;
+	pa_psw(task)->h = 0;
+	pa_psw(task)->l = 0;
+}
+
+/*
+ * The following functions are called by ptrace_resume() when
+ * enabling or disabling single/block tracing.
+ */
+void user_disable_single_step(struct task_struct *task)
+{
+	ptrace_disable(task);
+}
+
+void user_enable_single_step(struct task_struct *task)
+{
+	task->ptrace &= ~PT_BLOCKSTEP;
+	task->ptrace |= PT_SINGLESTEP;
+
+	if (pa_psw(task)->n) {
+		struct siginfo si;
+
+		/* Nullified, just crank over the queue. */
+		task_regs(task)->iaoq[0] = task_regs(task)->iaoq[1];
+		task_regs(task)->iasq[0] = task_regs(task)->iasq[1];
+		task_regs(task)->iaoq[1] = task_regs(task)->iaoq[0] + 4;
+		pa_psw(task)->n = 0;
+		pa_psw(task)->x = 0;
+		pa_psw(task)->y = 0;
+		pa_psw(task)->z = 0;
+		pa_psw(task)->b = 0;
+		ptrace_disable(task);
+		/* Don't wake up the task, but let the
+		   parent know something happened. */
+		si.si_code = TRAP_TRACE;
+		si.si_addr = (void __user *) (task_regs(task)->iaoq[0] & ~3);
+		si.si_signo = SIGTRAP;
+		si.si_errno = 0;
+		force_sig_info(SIGTRAP, &si, task);
+		/* notify_parent(task, SIGCHLD); */
+		return;
+	}
+
+	/* Enable recovery counter traps.  The recovery counter
+	 * itself will be set to zero on a task switch.  If the
+	 * task is suspended on a syscall then the syscall return
+	 * path will overwrite the recovery counter with a suitable
+	 * value such that it traps once back in user space.  We
+	 * disable interrupts in the tasks PSW here also, to avoid
+	 * interrupts while the recovery counter is decrementing.
+	 */
+	pa_psw(task)->r = 1;
+	pa_psw(task)->t = 0;
+	pa_psw(task)->h = 0;
+	pa_psw(task)->l = 0;
+}
+
+void user_enable_block_step(struct task_struct *task)
+{
+	task->ptrace &= ~PT_SINGLESTEP;
+	task->ptrace |= PT_BLOCKSTEP;
+
+	/* Enable taken branch trap. */
+	pa_psw(task)->r = 0;
+	pa_psw(task)->t = 1;
+	pa_psw(task)->h = 0;
+	pa_psw(task)->l = 0;
+}
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+	unsigned long tmp;
+	long ret = -EIO;
 
-#ifdef CONFIG_64BIT
+	switch (request) {
+
+	/* Read the word at location addr in the USER area.  For ptraced
+	   processes, the kernel saves all regs on a syscall. */
+	case PTRACE_PEEKUSR:
+		if ((addr & (sizeof(long)-1)) ||
+		    (unsigned long) addr >= sizeof(struct pt_regs))
+			break;
+		tmp = *(unsigned long *) ((char *) task_regs(child) + addr);
+		ret = put_user(tmp, (unsigned long *) data);
+		break;
+
+	/* Write the word at location addr in the USER area.  This will need
+	   to change when the kernel no longer saves all regs on a syscall.
+	   FIXME.  There is a problem at the moment in that r3-r18 are only
+	   saved if the process is ptraced on syscall entry, and even then
+	   those values are overwritten by actual register values on syscall
+	   exit. */
+	case PTRACE_POKEUSR:
+		/* Some register values written here may be ignored in
+		 * entry.S:syscall_restore_rfi; e.g. iaoq is written with
+		 * r31/r31+4, and not with the values in pt_regs.
+		 */
+		if (addr == PT_PSW) {
+			/* Allow writing to Nullify, Divide-step-correction,
+			 * and carry/borrow bits.
+			 * BEWARE, if you set N, and then single step, it won't
+			 * stop on the nullified instruction.
+			 */
+			data &= USER_PSW_BITS;
+			task_regs(child)->gr[0] &= ~USER_PSW_BITS;
+			task_regs(child)->gr[0] |= data;
+			ret = 0;
+			break;
+		}
+
+		if ((addr & (sizeof(long)-1)) ||
+		    (unsigned long) addr >= sizeof(struct pt_regs))
+			break;
+		if ((addr >= PT_GR1 && addr <= PT_GR31) ||
+				addr == PT_IAOQ0 || addr == PT_IAOQ1 ||
+				(addr >= PT_FR0 && addr <= PT_FR31 + 4) ||
+				addr == PT_SAR) {
+			*(unsigned long *) ((char *) task_regs(child) + addr) = data;
+			ret = 0;
+		}
+		break;
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+
+#ifdef CONFIG_COMPAT
 
 /* This function is needed to translate 32 bit pt_regs offsets in to
  * 64 bit pt_regs offsets.  For example, a 32 bit gdb under a 64 bit kernel
@@ -61,106 +196,25 @@ static long translate_usr_offset(long offset)
 	else
 		return -1;
 }
-#endif
 
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure single step bits etc are not set.
- */
-void ptrace_disable(struct task_struct *child)
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+			compat_ulong_t addr, compat_ulong_t data)
 {
-	/* make sure the trap bits are not set */
-	pa_psw(child)->r = 0;
-	pa_psw(child)->t = 0;
-	pa_psw(child)->h = 0;
-	pa_psw(child)->l = 0;
-}
-
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
-	long ret;
-#ifdef DEBUG_PTRACE
-	long oaddr=addr, odata=data;
-#endif
+	compat_uint_t tmp;
+	long ret = -EIO;
 
 	switch (request) {
-	case PTRACE_PEEKTEXT: /* read word at location addr. */ 
-	case PTRACE_PEEKDATA: {
-#ifdef CONFIG_64BIT
-		if (__is_compat_task(child)) {
-			int copied;
-			unsigned int tmp;
-
-			addr &= 0xffffffffL;
-			copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
-			ret = -EIO;
-			if (copied != sizeof(tmp))
-				goto out_tsk;
-			ret = put_user(tmp,(unsigned int *) data);
-			DBG("sys_ptrace(PEEK%s, %d, %lx, %lx) returning %ld, data %x\n",
-				request == PTRACE_PEEKTEXT ? "TEXT" : "DATA",
-				pid, oaddr, odata, ret, tmp);
-		}
-		else
-#endif
-			ret = generic_ptrace_peekdata(child, addr, data);
-		goto out_tsk;
-	}
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = 0;
-#ifdef CONFIG_64BIT
-		if (__is_compat_task(child)) {
-			unsigned int tmp = (unsigned int)data;
-			DBG("sys_ptrace(POKE%s, %d, %lx, %lx)\n",
-				request == PTRACE_POKETEXT ? "TEXT" : "DATA",
-				pid, oaddr, odata);
-			addr &= 0xffffffffL;
-			if (access_process_vm(child, addr, &tmp, sizeof(tmp), 1) == sizeof(tmp))
-				goto out_tsk;
-		}
-		else
-#endif
-		{
-			if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
-				goto out_tsk;
-		}
-		ret = -EIO;
-		goto out_tsk;
-
-	/* Read the word at location addr in the USER area.  For ptraced
-	   processes, the kernel saves all regs on a syscall. */
-	case PTRACE_PEEKUSR: {
-		ret = -EIO;
-#ifdef CONFIG_64BIT
-		if (__is_compat_task(child)) {
-			unsigned int tmp;
-
-			if (addr & (sizeof(int)-1))
-				goto out_tsk;
-			if ((addr = translate_usr_offset(addr)) < 0)
-				goto out_tsk;
-
-			tmp = *(unsigned int *) ((char *) task_regs(child) + addr);
-			ret = put_user(tmp, (unsigned int *) data);
-			DBG("sys_ptrace(PEEKUSR, %d, %lx, %lx) returning %ld, addr %lx, data %x\n",
-				pid, oaddr, odata, ret, addr, tmp);
-		}
-		else
-#endif
-		{
-			unsigned long tmp;
+	case PTRACE_PEEKUSR:
+		if (addr & (sizeof(compat_uint_t)-1))
+			break;
+		addr = translate_usr_offset(addr);
+		if (addr < 0)
+			break;
 
-			if ((addr & (sizeof(long)-1)) || (unsigned long) addr >= sizeof(struct pt_regs))
-				goto out_tsk;
-			tmp = *(unsigned long *) ((char *) task_regs(child) + addr);
-			ret = put_user(tmp, (unsigned long *) data);
-		}
-		goto out_tsk;
-	}
+		tmp = *(compat_uint_t *) ((char *) task_regs(child) + addr);
+		ret = put_user(tmp, (compat_uint_t *) (unsigned long) data);
+		break;
 
 	/* Write the word at location addr in the USER area.  This will need
 	   to change when the kernel no longer saves all regs on a syscall.
@@ -169,185 +223,46 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	   those values are overwritten by actual register values on syscall
 	   exit. */
 	case PTRACE_POKEUSR:
-		ret = -EIO;
 		/* Some register values written here may be ignored in
 		 * entry.S:syscall_restore_rfi; e.g. iaoq is written with
 		 * r31/r31+4, and not with the values in pt_regs.
 		 */
-		 /* PT_PSW=0, so this is valid for 32 bit processes under 64
-		 * bit kernels.
-		 */
 		if (addr == PT_PSW) {
-			/* PT_PSW=0, so this is valid for 32 bit processes
-			 * under 64 bit kernels.
-			 *
-			 * Allow writing to Nullify, Divide-step-correction,
-			 * and carry/borrow bits.
-			 * BEWARE, if you set N, and then single step, it won't
-			 * stop on the nullified instruction.
+			/* Since PT_PSW==0, it is valid for 32 bit processes
+			 * under 64 bit kernels as well.
 			 */
-			DBG("sys_ptrace(POKEUSR, %d, %lx, %lx)\n",
-				pid, oaddr, odata);
-			data &= USER_PSW_BITS;
-			task_regs(child)->gr[0] &= ~USER_PSW_BITS;
-			task_regs(child)->gr[0] |= data;
-			ret = 0;
-			goto out_tsk;
-		}
-#ifdef CONFIG_64BIT
-		if (__is_compat_task(child)) {
-			if (addr & (sizeof(int)-1))
-				goto out_tsk;
-			if ((addr = translate_usr_offset(addr)) < 0)
-				goto out_tsk;
-			DBG("sys_ptrace(POKEUSR, %d, %lx, %lx) addr %lx\n",
-				pid, oaddr, odata, addr);
+			ret = arch_ptrace(child, request, addr, data);
+		} else {
+			if (addr & (sizeof(compat_uint_t)-1))
+				break;
+			addr = translate_usr_offset(addr);
+			if (addr < 0)
+				break;
 			if (addr >= PT_FR0 && addr <= PT_FR31 + 4) {
 				/* Special case, fp regs are 64 bits anyway */
-				*(unsigned int *) ((char *) task_regs(child) + addr) = data;
+				*(__u64 *) ((char *) task_regs(child) + addr) = data;
 				ret = 0;
 			}
 			else if ((addr >= PT_GR1+4 && addr <= PT_GR31+4) ||
 					addr == PT_IAOQ0+4 || addr == PT_IAOQ1+4 ||
 					addr == PT_SAR+4) {
 				/* Zero the top 32 bits */
-				*(unsigned int *) ((char *) task_regs(child) + addr - 4) = 0;
-				*(unsigned int *) ((char *) task_regs(child) + addr) = data;
+				*(__u32 *) ((char *) task_regs(child) + addr - 4) = 0;
+				*(__u32 *) ((char *) task_regs(child) + addr) = data;
 				ret = 0;
 			}
-			goto out_tsk;
 		}
-		else
-#endif
-		{
-			if ((addr & (sizeof(long)-1)) || (unsigned long) addr >= sizeof(struct pt_regs))
-				goto out_tsk;
-			if ((addr >= PT_GR1 && addr <= PT_GR31) ||
-					addr == PT_IAOQ0 || addr == PT_IAOQ1 ||
-					(addr >= PT_FR0 && addr <= PT_FR31 + 4) ||
-					addr == PT_SAR) {
-				*(unsigned long *) ((char *) task_regs(child) + addr) = data;
-				ret = 0;
-			}
-			goto out_tsk;
-		}
-
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:
-		ret = -EIO;
-		DBG("sys_ptrace(%s)\n",
-			request == PTRACE_SYSCALL ? "SYSCALL" : "CONT");
-		if (!valid_signal(data))
-			goto out_tsk;
-		child->ptrace &= ~(PT_SINGLESTEP|PT_BLOCKSTEP);
-		if (request == PTRACE_SYSCALL) {
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		} else {
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		}		
-		child->exit_code = data;
-		goto out_wake_notrap;
-
-	case PTRACE_KILL:
-		/*
-		 * make the child exit.  Best I can do is send it a
-		 * sigkill.  perhaps it should be put in the status
-		 * that it wants to exit.
-		 */
-		ret = 0;
-		DBG("sys_ptrace(KILL)\n");
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			goto out_tsk;
-		child->exit_code = SIGKILL;
-		goto out_wake_notrap;
-
-	case PTRACE_SINGLEBLOCK:
-		DBG("sys_ptrace(SINGLEBLOCK)\n");
-		ret = -EIO;
-		if (!valid_signal(data))
-			goto out_tsk;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->ptrace &= ~PT_SINGLESTEP;
-		child->ptrace |= PT_BLOCKSTEP;
-		child->exit_code = data;
-
-		/* Enable taken branch trap. */
-		pa_psw(child)->r = 0;
-		pa_psw(child)->t = 1;
-		pa_psw(child)->h = 0;
-		pa_psw(child)->l = 0;
-		goto out_wake;
-
-	case PTRACE_SINGLESTEP:
-		DBG("sys_ptrace(SINGLESTEP)\n");
-		ret = -EIO;
-		if (!valid_signal(data))
-			goto out_tsk;
-
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->ptrace &= ~PT_BLOCKSTEP;
-		child->ptrace |= PT_SINGLESTEP;
-		child->exit_code = data;
-
-		if (pa_psw(child)->n) {
-			struct siginfo si;
-
-			/* Nullified, just crank over the queue. */
-			task_regs(child)->iaoq[0] = task_regs(child)->iaoq[1];
-			task_regs(child)->iasq[0] = task_regs(child)->iasq[1];
-			task_regs(child)->iaoq[1] = task_regs(child)->iaoq[0] + 4;
-			pa_psw(child)->n = 0;
-			pa_psw(child)->x = 0;
-			pa_psw(child)->y = 0;
-			pa_psw(child)->z = 0;
-			pa_psw(child)->b = 0;
-			ptrace_disable(child);
-			/* Don't wake up the child, but let the
-			   parent know something happened. */
-			si.si_code = TRAP_TRACE;
-			si.si_addr = (void __user *) (task_regs(child)->iaoq[0] & ~3);
-			si.si_signo = SIGTRAP;
-			si.si_errno = 0;
-			force_sig_info(SIGTRAP, &si, child);
-			//notify_parent(child, SIGCHLD);
-			//ret = 0;
-			goto out_wake;
-		}
-
-		/* Enable recovery counter traps.  The recovery counter
-		 * itself will be set to zero on a task switch.  If the
-		 * task is suspended on a syscall then the syscall return
-		 * path will overwrite the recovery counter with a suitable
-		 * value such that it traps once back in user space.  We
-		 * disable interrupts in the childs PSW here also, to avoid
-		 * interrupts while the recovery counter is decrementing.
-		 */
-		pa_psw(child)->r = 1;
-		pa_psw(child)->t = 0;
-		pa_psw(child)->h = 0;
-		pa_psw(child)->l = 0;
-		/* give it a chance to run. */
-		goto out_wake;
-
-	case PTRACE_GETEVENTMSG:
-                ret = put_user(child->ptrace_message, (unsigned int __user *) data);
-		goto out_tsk;
+		break;
 
 	default:
-		ret = ptrace_request(child, request, addr, data);
-		goto out_tsk;
+		ret = compat_ptrace_request(child, request, addr, data);
+		break;
 	}
 
-out_wake_notrap:
-	ptrace_disable(child);
-out_wake:
-	wake_up_process(child);
-	ret = 0;
-out_tsk:
-	DBG("arch_ptrace(%ld, %d, %lx, %lx) returning %ld\n",
-		request, pid, oaddr, odata, ret);
 	return ret;
 }
+#endif
+
 
 void syscall_trace(void)
 {
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 7a92695..5f3d3a1 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -8,12 +8,24 @@
  *
  */
 
+#include <asm/pdc.h>
 #include <asm/psw.h>
 #include <asm/assembly.h>
+#include <asm/asm-offsets.h>
 
 #include <linux/linkage.h>
 
+
 	.section	.bss
+
+	.export pdc_result
+	.export pdc_result2
+	.align 8
+pdc_result:
+	.block	ASM_PDC_RESULT_SIZE
+pdc_result2:
+	.block	ASM_PDC_RESULT_SIZE
+
 	.export real_stack
 	.export real32_stack
 	.export real64_stack
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 39e7c5a..7d27853 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -44,6 +44,7 @@
 #include <asm/pdc_chassis.h>
 #include <asm/io.h>
 #include <asm/setup.h>
+#include <asm/unwind.h>
 
 static char __initdata command_line[COMMAND_LINE_SIZE];
 
@@ -123,6 +124,7 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_64BIT
 	extern int parisc_narrow_firmware;
 #endif
+	unwind_init();
 
 	init_per_cpu(smp_processor_id());	/* Set Modes & Enable FP */
 
@@ -368,6 +370,31 @@ static int __init parisc_init(void)
 
 	return 0;
 }
-
 arch_initcall(parisc_init);
 
+void start_parisc(void)
+{
+	extern void start_kernel(void);
+
+	int ret, cpunum;
+	struct pdc_coproc_cfg coproc_cfg;
+
+	cpunum = smp_processor_id();
+
+	set_firmware_width_unlocked();
+
+	ret = pdc_coproc_cfg_unlocked(&coproc_cfg);
+	if (ret >= 0 && coproc_cfg.ccr_functional) {
+		mtctl(coproc_cfg.ccr_functional, 10);
+
+		cpu_data[cpunum].fp_rev = coproc_cfg.revision;
+		cpu_data[cpunum].fp_model = coproc_cfg.model;
+
+		asm volatile ("fstd	%fr0,8(%sp)");
+	} else {
+		panic("must have an fpu to boot linux");
+	}
+
+	start_kernel();
+	// not reached
+}
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 71efd6a..0838155 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -179,111 +179,6 @@ asmlinkage long sys32_sched_rr_get_interval(pid_t pid,
 	return ret;
 }
 
-static int
-put_compat_timeval(struct compat_timeval __user *u, struct timeval *t)
-{
-	struct compat_timeval t32;
-	t32.tv_sec = t->tv_sec;
-	t32.tv_usec = t->tv_usec;
-	return copy_to_user(u, &t32, sizeof t32);
-}
-
-static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
-{
-	long usec;
-
-	if (__get_user(o->tv_sec, &i->tv_sec))
-		return -EFAULT;
-	if (__get_user(usec, &i->tv_usec))
-		return -EFAULT;
-	o->tv_nsec = usec * 1000;
-	return 0;
-}
-
-asmlinkage int
-sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
-{
-    extern void do_gettimeofday(struct timeval *tv);
-
-    if (tv) {
-	    struct timeval ktv;
-	    do_gettimeofday(&ktv);
-	    if (put_compat_timeval(tv, &ktv))
-		    return -EFAULT;
-    }
-    if (tz) {
-	    extern struct timezone sys_tz;
-	    if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
-		    return -EFAULT;
-    }
-    return 0;
-}
-
-asmlinkage 
-int sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
-{
-	struct timespec kts;
-	struct timezone ktz;
-
- 	if (tv) {
-		if (get_ts32(&kts, tv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_from_user(&ktz, tz, sizeof(ktz)))
-			return -EFAULT;
-	}
-
-	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
-}
-
-int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
-{
-	compat_ino_t ino;
-	int err;
-
-	if (stat->size > MAX_NON_LFS || !new_valid_dev(stat->dev) ||
-	    !new_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-
-	ino = stat->ino;
-	if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino)
-		return -EOVERFLOW;
-
-	err  = put_user(new_encode_dev(stat->dev), &statbuf->st_dev);
-	err |= put_user(ino, &statbuf->st_ino);
-	err |= put_user(stat->mode, &statbuf->st_mode);
-	err |= put_user(stat->nlink, &statbuf->st_nlink);
-	err |= put_user(0, &statbuf->st_reserved1);
-	err |= put_user(0, &statbuf->st_reserved2);
-	err |= put_user(new_encode_dev(stat->rdev), &statbuf->st_rdev);
-	err |= put_user(stat->size, &statbuf->st_size);
-	err |= put_user(stat->atime.tv_sec, &statbuf->st_atime);
-	err |= put_user(stat->atime.tv_nsec, &statbuf->st_atime_nsec);
-	err |= put_user(stat->mtime.tv_sec, &statbuf->st_mtime);
-	err |= put_user(stat->mtime.tv_nsec, &statbuf->st_mtime_nsec);
-	err |= put_user(stat->ctime.tv_sec, &statbuf->st_ctime);
-	err |= put_user(stat->ctime.tv_nsec, &statbuf->st_ctime_nsec);
-	err |= put_user(stat->blksize, &statbuf->st_blksize);
-	err |= put_user(stat->blocks, &statbuf->st_blocks);
-	err |= put_user(0, &statbuf->__unused1);
-	err |= put_user(0, &statbuf->__unused2);
-	err |= put_user(0, &statbuf->__unused3);
-	err |= put_user(0, &statbuf->__unused4);
-	err |= put_user(0, &statbuf->__unused5);
-	err |= put_user(0, &statbuf->st_fstype); /* not avail */
-	err |= put_user(0, &statbuf->st_realdev); /* not avail */
-	err |= put_user(0, &statbuf->st_basemode); /* not avail */
-	err |= put_user(0, &statbuf->st_spareshort);
-	err |= put_user(stat->uid, &statbuf->st_uid);
-	err |= put_user(stat->gid, &statbuf->st_gid);
-	err |= put_user(0, &statbuf->st_spare4[0]);
-	err |= put_user(0, &statbuf->st_spare4[1]);
-	err |= put_user(0, &statbuf->st_spare4[2]);
-
-	return err;
-}
-
 /*** copied from mips64 ***/
 /*
  * Ooo, nasty.  We need here to frob 32-bit unsigned longs to
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 6b5ac38..303d2b6 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -87,7 +87,7 @@
 	ENTRY_SAME(setuid)
 	ENTRY_SAME(getuid)
 	ENTRY_COMP(stime)		/* 25 */
-	ENTRY_SAME(ptrace)
+	ENTRY_COMP(ptrace)
 	ENTRY_SAME(alarm)
 	/* see stat comment */
 	ENTRY_COMP(newfstat)
@@ -149,8 +149,8 @@
 	ENTRY_COMP(getrlimit)
 	ENTRY_COMP(getrusage)
 	/* struct timeval and timezone are maybe?? consistent wide and narrow */
-	ENTRY_DIFF(gettimeofday)
-	ENTRY_DIFF(settimeofday)
+	ENTRY_COMP(gettimeofday)
+	ENTRY_COMP(settimeofday)
 	ENTRY_SAME(getgroups)		/* 80 */
 	ENTRY_SAME(setgroups)
 	/* struct socketaddr... */
@@ -407,6 +407,12 @@
 	ENTRY_SAME(timerfd_create)
 	ENTRY_COMP(timerfd_settime)
 	ENTRY_COMP(timerfd_gettime)
+	ENTRY_COMP(signalfd4)
+	ENTRY_SAME(eventfd2)		/* 310 */
+	ENTRY_SAME(epoll_create1)
+	ENTRY_SAME(dup3)
+	ENTRY_SAME(pipe2)
+	ENTRY_SAME(inotify_init1)
 
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 24be86b..4d09203 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -23,6 +23,7 @@
 #include <linux/smp.h>
 #include <linux/profile.h>
 #include <linux/clocksource.h>
+#include <linux/platform_device.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -215,6 +216,24 @@ void __init start_cpu_itimer(void)
 	cpu_data[cpu].it_value = next_tick;
 }
 
+struct platform_device rtc_parisc_dev = {
+	.name = "rtc-parisc",
+	.id = -1,
+};
+
+static int __init rtc_init(void)
+{
+	int ret;
+
+	ret = platform_device_register(&rtc_parisc_dev);
+	if (ret < 0)
+		printk(KERN_ERR "unable to register rtc device...\n");
+
+	/* not necessarily an error */
+	return 0;
+}
+module_init(rtc_init);
+
 void __init time_init(void)
 {
 	static struct pdc_tod tod_data;
@@ -245,4 +264,3 @@ void __init time_init(void)
 		xtime.tv_nsec = 0;
 	}
 }
-
diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c
index 701b2d2..6773c58 100644
--- a/arch/parisc/kernel/unwind.c
+++ b/arch/parisc/kernel/unwind.c
@@ -170,7 +170,7 @@ void unwind_table_remove(struct unwind_table *table)
 }
 
 /* Called from setup_arch to import the kernel unwind info */
-static int unwind_init(void)
+int unwind_init(void)
 {
 	long start, stop;
 	register unsigned long gp __asm__ ("r27");
@@ -417,5 +417,3 @@ int unwind_to_user(struct unwind_frame_info *info)
 
 	return ret;
 }
-
-module_init(unwind_init);
diff --git a/arch/parisc/oprofile/init.c b/arch/parisc/oprofile/init.c
index 113f513..026cba2 100644
--- a/arch/parisc/oprofile/init.c
+++ b/arch/parisc/oprofile/init.c
@@ -12,7 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/oprofile.h>
 
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	return -ENODEV;
 }
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 587da5e..5b15278 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -19,8 +19,8 @@ config WORD_SIZE
 	default 64 if PPC64
 	default 32 if !PPC64
 
-config PPC_MERGE
-	def_bool y
+config ARCH_PHYS_ADDR_T_64BIT
+       def_bool PPC64 || PHYS_64BIT
 
 config MMU
 	bool
@@ -227,6 +227,8 @@ config PPC_OF_PLATFORM_PCI
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 source "arch/powerpc/sysdev/Kconfig"
 source "arch/powerpc/platforms/Kconfig"
 
@@ -321,13 +323,11 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
-	depends on PPC_MULTIPLATFORM && PPC64
+	depends on PPC_MULTIPLATFORM && PPC64 && RELOCATABLE
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
-	  The kernel will be linked at a different address than normal, and
-	  so can only be used for Kdump.
-
-	  Don't change this unless you know what you are doing.
+	  The same kernel binary can be used as production kernel and dump
+	  capture kernel.
 
 config PHYP_DUMP
 	bool "Hypervisor-assisted dump (EXPERIMENTAL)"
@@ -415,8 +415,11 @@ config PPC_64K_PAGES
 
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
+	range 9 64 if PPC_64K_PAGES
 	default "9" if PPC_64K_PAGES
+	range 13 64 if PPC64 && !PPC_64K_PAGES
 	default "13" if PPC64 && !PPC_64K_PAGES
+	range 11 64
 	default "11"
 	help
 	  The kernel memory allocator divides physically contiguous memory
@@ -806,16 +809,27 @@ config PIN_TLB
 endmenu
 
 if PPC64
+config RELOCATABLE
+	bool "Build a relocatable kernel"
+	help
+	  This builds a kernel image that is capable of running anywhere
+	  in the RMA (real memory area) at any 16k-aligned base address.
+	  The kernel is linked as a position-independent executable (PIE)
+	  and contains dynamic relocations which are processed early
+	  in the bootup process.
+
+	  One use is for the kexec on panic case where the recovery kernel
+	  must live at a different physical address than the primary
+	  kernel.
+
 config PAGE_OFFSET
 	hex
 	default "0xc000000000000000"
 config KERNEL_START
 	hex
-	default "0xc000000002000000" if CRASH_DUMP
 	default "0xc000000000000000"
 config PHYSICAL_START
 	hex
-	default "0x02000000" if CRASH_DUMP
 	default "0x00000000"
 endif
 
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 4ebc52a..15eb278 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -51,6 +51,11 @@ config FTR_FIXUP_SELFTEST
 	depends on DEBUG_KERNEL
 	default n
 
+config MSI_BITMAP_SELFTEST
+	bool "Run self-tests of the MSI bitmap code."
+	depends on DEBUG_KERNEL
+	default n
+
 config XMON
 	bool "Include xmon kernel debugger"
 	depends on DEBUG_KERNEL
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index c6be19e..24dd1a3 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -63,7 +63,9 @@ override CC	+= -m$(CONFIG_WORD_SIZE)
 override AR	:= GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR)
 endif
 
-LDFLAGS_vmlinux	:= -Bstatic
+LDFLAGS_vmlinux-yy := -Bstatic
+LDFLAGS_vmlinux-$(CONFIG_PPC64)$(CONFIG_RELOCATABLE) := -pie
+LDFLAGS_vmlinux	:= $(LDFLAGS_vmlinux-yy)
 
 CFLAGS-$(CONFIG_PPC64)	:= -mminimal-toc -mtraceback=none  -mcall-aixdesc
 CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 -mmultiple
@@ -102,7 +104,10 @@ endif
 KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
 
 # No SPE instruction when building kernel
+# (We use all available options to help semi-broken compilers)
 KBUILD_CFLAGS += $(call cc-option,-mno-spe)
+KBUILD_CFLAGS += $(call cc-option,-mspe=no)
+KBUILD_CFLAGS += $(call cc-option,-mabi=no-spe)
 
 # Enable unit-at-a-time mode when possible. It shrinks the
 # kernel considerably.
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 65d1a84..8fc6d72 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -68,7 +68,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
-		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c
+		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
+		cuboot-acadia.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -211,6 +212,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 # Board ports in arch/powerpc/platform/40x/Kconfig
 image-$(CONFIG_EP405)			+= dtbImage.ep405
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
+image-$(CONFIG_ACADIA)			+= cuImage.acadia
 
 # Board ports in arch/powerpc/platform/44x/Kconfig
 image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
@@ -310,12 +312,18 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
 $(obj)/vmlinux.strip: vmlinux
 	$(STRIP) -s -R .comment $< -o $@
 
+# The iseries hypervisor won't take an ET_DYN executable, so this
+# changes the type (byte 17) in the file to ET_EXEC (2).
 $(obj)/zImage.iseries: vmlinux
 	$(STRIP) -s -R .comment $< -o $@
+	printf "\x02" | dd of=$@ conv=notrunc bs=1 seek=17
 
 $(obj)/uImage: vmlinux $(wrapperbits)
 	$(call if_changed,wrap,uboot)
 
+$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
 $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
 
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index b1e5611..3091d1d 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -11,7 +11,12 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  *
- * Usage: addnote zImage
+ * Usage: addnote [-r realbase] zImage [note.elf]
+ *
+ * If note.elf is supplied, it is the name of an ELF file that contains
+ * an RPA note to use instead of the built-in one.  Alternatively, the
+ * note.elf file may be empty, in which case the built-in RPA note is
+ * used (this is to simplify how this is invoked from the wrapper script).
  */
 #include <stdio.h>
 #include <stdlib.h>
@@ -43,27 +48,29 @@ char rpaname[] = "IBM,RPA-Client-Config";
  */
 #define N_RPA_DESCR	8
 unsigned int rpanote[N_RPA_DESCR] = {
-	0,			/* lparaffinity */
-	64,			/* min_rmo_size */
+	1,			/* lparaffinity */
+	128,			/* min_rmo_size */
 	0,			/* min_rmo_percent */
-	40,			/* max_pft_size */
+	46,			/* max_pft_size */
 	1,			/* splpar */
 	-1,			/* min_load */
-	0,			/* new_mem_def */
-	1,			/* ignore_my_client_config */
+	1,			/* new_mem_def */
+	0,			/* ignore_my_client_config */
 };
 
 #define ROUNDUP(len)	(((len) + 3) & ~3)
 
 unsigned char buf[512];
+unsigned char notebuf[512];
 
-#define GET_16BE(off)	((buf[off] << 8) + (buf[(off)+1]))
-#define GET_32BE(off)	((GET_16BE(off) << 16) + GET_16BE((off)+2))
+#define GET_16BE(b, off)	(((b)[off] << 8) + ((b)[(off)+1]))
+#define GET_32BE(b, off)	((GET_16BE((b), (off)) << 16) + \
+				 GET_16BE((b), (off)+2))
 
-#define PUT_16BE(off, v)	(buf[off] = ((v) >> 8) & 0xff, \
-				 buf[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(off, v)	(PUT_16BE((off), (v) >> 16), \
-				 PUT_16BE((off) + 2, (v)))
+#define PUT_16BE(b, off, v)	((b)[off] = ((v) >> 8) & 0xff, \
+				 (b)[(off) + 1] = (v) & 0xff)
+#define PUT_32BE(b, off, v)	(PUT_16BE((b), (off), (v) >> 16), \
+				 PUT_16BE((b), (off) + 2, (v)))
 
 /* Structure of an ELF file */
 #define E_IDENT		0	/* ELF header */
@@ -88,25 +95,95 @@ unsigned char buf[512];
 
 unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
 
+unsigned char *read_rpanote(const char *fname, int *nnp)
+{
+	int notefd, nr, i;
+	int ph, ps, np;
+	int note, notesize;
+
+	notefd = open(fname, O_RDONLY);
+	if (notefd < 0) {
+		perror(fname);
+		exit(1);
+	}
+	nr = read(notefd, notebuf, sizeof(notebuf));
+	if (nr < 0) {
+		perror("read note");
+		exit(1);
+	}
+	if (nr == 0)		/* empty file */
+		return NULL;
+	if (nr < E_HSIZE ||
+	    memcmp(&notebuf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0 ||
+	    notebuf[E_IDENT+EI_CLASS] != ELFCLASS32 ||
+	    notebuf[E_IDENT+EI_DATA] != ELFDATA2MSB)
+		goto notelf;
+	close(notefd);
+
+	/* now look for the RPA-note */
+	ph = GET_32BE(notebuf, E_PHOFF);
+	ps = GET_16BE(notebuf, E_PHENTSIZE);
+	np = GET_16BE(notebuf, E_PHNUM);
+	if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
+		goto notelf;
+
+	for (i = 0; i < np; ++i, ph += ps) {
+		if (GET_32BE(notebuf, ph + PH_TYPE) != PT_NOTE)
+			continue;
+		note = GET_32BE(notebuf, ph + PH_OFFSET);
+		notesize = GET_32BE(notebuf, ph + PH_FILESZ);
+		if (notesize < 34 || note + notesize > nr)
+			continue;
+		if (GET_32BE(notebuf, note) != strlen(rpaname) + 1 ||
+		    GET_32BE(notebuf, note + 8) != 0x12759999 ||
+		    strcmp((char *)&notebuf[note + 12], rpaname) != 0)
+			continue;
+		/* looks like an RPA note, return it */
+		*nnp = notesize;
+		return &notebuf[note];
+	}
+	/* no RPA note found */
+	return NULL;
+
+ notelf:
+	fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", fname);
+	exit(1);
+}
+
 int
 main(int ac, char **av)
 {
-	int fd, n, i;
+	int fd, n, i, ai;
 	int ph, ps, np;
 	int nnote, nnote2, ns;
-
-	if (ac != 2) {
-		fprintf(stderr, "Usage: %s elf-file\n", av[0]);
+	unsigned char *rpap;
+	char *p, *endp;
+
+	ai = 1;
+	if (ac >= ai + 2 && strcmp(av[ai], "-r") == 0) {
+		/* process -r realbase */
+		p = av[ai + 1];
+		descr[1] = strtol(p, &endp, 16);
+		if (endp == p || *endp != 0) {
+			fprintf(stderr, "Can't parse -r argument '%s' as hex\n",
+				p);
+			exit(1);
+		}
+		ai += 2;
+	}
+	if (ac != ai + 1 && ac != ai + 2) {
+		fprintf(stderr, "Usage: %s [-r realbase] elf-file [rpanote.elf]\n", av[0]);
 		exit(1);
 	}
-	fd = open(av[1], O_RDWR);
+	fd = open(av[ai], O_RDWR);
 	if (fd < 0) {
-		perror(av[1]);
+		perror(av[ai]);
 		exit(1);
 	}
 
 	nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr);
 	nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote);
+	rpap = NULL;
 
 	n = read(fd, buf, sizeof(buf));
 	if (n < 0) {
@@ -120,22 +197,25 @@ main(int ac, char **av)
 	if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
 	    || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
 		fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
-			av[1]);
+			av[ai]);
 		exit(1);
 	}
 
-	ph = GET_32BE(E_PHOFF);
-	ps = GET_16BE(E_PHENTSIZE);
-	np = GET_16BE(E_PHNUM);
+	if (ac == ai + 2)
+		rpap = read_rpanote(av[ai + 1], &nnote2);
+
+	ph = GET_32BE(buf, E_PHOFF);
+	ps = GET_16BE(buf, E_PHENTSIZE);
+	np = GET_16BE(buf, E_PHNUM);
 	if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
 		goto notelf;
 	if (ph + (np + 2) * ps + nnote + nnote2 > n)
 		goto nospace;
 
 	for (i = 0; i < np; ++i) {
-		if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
+		if (GET_32BE(buf, ph + PH_TYPE) == PT_NOTE) {
 			fprintf(stderr, "%s already has a note entry\n",
-				av[1]);
+				av[ai]);
 			exit(0);
 		}
 		ph += ps;
@@ -148,37 +228,42 @@ main(int ac, char **av)
 
 	/* fill in the program header entry */
 	ns = ph + 2 * ps;
-	PUT_32BE(ph + PH_TYPE, PT_NOTE);
-	PUT_32BE(ph + PH_OFFSET, ns);
-	PUT_32BE(ph + PH_FILESZ, nnote);
+	PUT_32BE(buf, ph + PH_TYPE, PT_NOTE);
+	PUT_32BE(buf, ph + PH_OFFSET, ns);
+	PUT_32BE(buf, ph + PH_FILESZ, nnote);
 
 	/* fill in the note area we point to */
 	/* XXX we should probably make this a proper section */
-	PUT_32BE(ns, strlen(arch) + 1);
-	PUT_32BE(ns + 4, N_DESCR * 4);
-	PUT_32BE(ns + 8, 0x1275);
+	PUT_32BE(buf, ns, strlen(arch) + 1);
+	PUT_32BE(buf, ns + 4, N_DESCR * 4);
+	PUT_32BE(buf, ns + 8, 0x1275);
 	strcpy((char *) &buf[ns + 12], arch);
 	ns += 12 + strlen(arch) + 1;
 	for (i = 0; i < N_DESCR; ++i, ns += 4)
-		PUT_32BE(ns, descr[i]);
+		PUT_32BE(buf, ns, descr[i]);
 
 	/* fill in the second program header entry and the RPA note area */
 	ph += ps;
-	PUT_32BE(ph + PH_TYPE, PT_NOTE);
-	PUT_32BE(ph + PH_OFFSET, ns);
-	PUT_32BE(ph + PH_FILESZ, nnote2);
+	PUT_32BE(buf, ph + PH_TYPE, PT_NOTE);
+	PUT_32BE(buf, ph + PH_OFFSET, ns);
+	PUT_32BE(buf, ph + PH_FILESZ, nnote2);
 
 	/* fill in the note area we point to */
-	PUT_32BE(ns, strlen(rpaname) + 1);
-	PUT_32BE(ns + 4, sizeof(rpanote));
-	PUT_32BE(ns + 8, 0x12759999);
-	strcpy((char *) &buf[ns + 12], rpaname);
-	ns += 12 + ROUNDUP(strlen(rpaname) + 1);
-	for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
-		PUT_32BE(ns, rpanote[i]);
+	if (rpap) {
+		/* RPA note supplied in file, just copy the whole thing over */
+		memcpy(buf + ns, rpap, nnote2);
+	} else {
+		PUT_32BE(buf, ns, strlen(rpaname) + 1);
+		PUT_32BE(buf, ns + 4, sizeof(rpanote));
+		PUT_32BE(buf, ns + 8, 0x12759999);
+		strcpy((char *) &buf[ns + 12], rpaname);
+		ns += 12 + ROUNDUP(strlen(rpaname) + 1);
+		for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
+			PUT_32BE(buf, ns, rpanote[i]);
+	}
 
 	/* Update the number of program headers */
-	PUT_16BE(E_PHNUM, np + 2);
+	PUT_16BE(buf, E_PHNUM, np + 2);
 
 	/* write back */
 	lseek(fd, (long) 0, SEEK_SET);
@@ -188,18 +273,18 @@ main(int ac, char **av)
 		exit(1);
 	}
 	if (i < n) {
-		fprintf(stderr, "%s: write truncated\n", av[1]);
+		fprintf(stderr, "%s: write truncated\n", av[ai]);
 		exit(1);
 	}
 
 	exit(0);
 
  notelf:
-	fprintf(stderr, "%s does not appear to be an ELF file\n", av[1]);
+	fprintf(stderr, "%s does not appear to be an ELF file\n", av[ai]);
 	exit(1);
 
  nospace:
 	fprintf(stderr, "sorry, I can't find space in %s to put the note\n",
-		av[1]);
+		av[ai]);
 	exit(1);
 }
diff --git a/arch/powerpc/boot/cuboot-52xx.c b/arch/powerpc/boot/cuboot-52xx.c
index a861154..4c42ec8 100644
--- a/arch/powerpc/boot/cuboot-52xx.c
+++ b/arch/powerpc/boot/cuboot-52xx.c
@@ -37,6 +37,10 @@ static void platform_fixups(void)
 	 * this can do a simple path lookup.
 	 */
 	soc = find_node_by_devtype(NULL, "soc");
+	if (!soc)
+		soc = find_node_by_compatible(NULL, "fsl,mpc5200-immr");
+	if (!soc)
+		soc = find_node_by_compatible(NULL, "fsl,mpc5200b-immr");
 	if (soc) {
 		setprop(soc, "bus-frequency", &bd.bi_ipbfreq,
 			sizeof(bd.bi_ipbfreq));
diff --git a/arch/powerpc/boot/cuboot-acadia.c b/arch/powerpc/boot/cuboot-acadia.c
new file mode 100644
index 0000000..0634aba
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-acadia.c
@@ -0,0 +1,174 @@
+/*
+ * Old U-boot compatibility for Acadia
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "dcr.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#include "ppcboot.h"
+
+static bd_t bd;
+
+#define CPR_PERD0_SPIDV_MASK   0x000F0000     /* SPI Clock Divider */
+
+#define PLLC_SRC_MASK	       0x20000000     /* PLL feedback source */
+
+#define PLLD_FBDV_MASK	       0x1F000000     /* PLL feedback divider value */
+#define PLLD_FWDVA_MASK        0x000F0000     /* PLL forward divider A value */
+#define PLLD_FWDVB_MASK        0x00000700     /* PLL forward divider B value */
+
+#define PRIMAD_CPUDV_MASK      0x0F000000     /* CPU Clock Divisor Mask */
+#define PRIMAD_PLBDV_MASK      0x000F0000     /* PLB Clock Divisor Mask */
+#define PRIMAD_OPBDV_MASK      0x00000F00     /* OPB Clock Divisor Mask */
+#define PRIMAD_EBCDV_MASK      0x0000000F     /* EBC Clock Divisor Mask */
+
+#define PERD0_PWMDV_MASK       0xFF000000     /* PWM Divider Mask */
+#define PERD0_SPIDV_MASK       0x000F0000     /* SPI Divider Mask */
+#define PERD0_U0DV_MASK        0x0000FF00     /* UART 0 Divider Mask */
+#define PERD0_U1DV_MASK        0x000000FF     /* UART 1 Divider Mask */
+
+static void get_clocks(void)
+{
+	unsigned long sysclk, cpr_plld, cpr_pllc, cpr_primad, plloutb, i;
+	unsigned long pllFwdDiv, pllFwdDivB, pllFbkDiv, pllPlbDiv, pllExtBusDiv;
+	unsigned long pllOpbDiv, freqEBC, freqUART, freqOPB;
+	unsigned long div;		/* total divisor udiv * bdiv */
+	unsigned long umin;		/* minimum udiv	*/
+	unsigned short diff;		/* smallest diff */
+	unsigned long udiv;		/* best udiv */
+	unsigned short idiff;		/* current diff */
+	unsigned short ibdiv;		/* current bdiv */
+	unsigned long est;		/* current estimate */
+	unsigned long baud;
+	void *np;
+
+	/* read the sysclk value from the CPLD */
+	sysclk = (in_8((unsigned char *)0x80000000) == 0xc) ? 66666666 : 33333000;
+
+	/*
+	 * Read PLL Mode registers
+	 */
+	cpr_plld = CPR0_READ(DCRN_CPR0_PLLD);
+	cpr_pllc = CPR0_READ(DCRN_CPR0_PLLC);
+
+	/*
+	 * Determine forward divider A
+	 */
+	pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+	/*
+	 * Determine forward divider B
+	 */
+	pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+	if (pllFwdDivB == 0)
+		pllFwdDivB = 8;
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+	pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+	if (pllFbkDiv == 0)
+		pllFbkDiv = 256;
+
+	/*
+	 * Read CPR_PRIMAD register
+	 */
+	cpr_primad = CPR0_READ(DCRN_CPR0_PRIMAD);
+
+	/*
+	 * Determine PLB_DIV.
+	 */
+	pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+	if (pllPlbDiv == 0)
+		pllPlbDiv = 16;
+
+	/*
+	 * Determine EXTBUS_DIV.
+	 */
+	pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+	if (pllExtBusDiv == 0)
+		pllExtBusDiv = 16;
+
+	/*
+	 * Determine OPB_DIV.
+	 */
+	pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+	if (pllOpbDiv == 0)
+		pllOpbDiv = 16;
+
+	/* There is a bug in U-Boot that prevents us from using
+	 * bd.bi_opbfreq because U-Boot doesn't populate it for
+	 * 405EZ.  We get to calculate it, yay!
+	 */
+	freqOPB = (sysclk *pllFbkDiv) /pllOpbDiv;
+
+	freqEBC = (sysclk * pllFbkDiv) / pllExtBusDiv;
+
+	plloutb = ((sysclk * ((cpr_pllc & PLLC_SRC_MASK) ?
+					   pllFwdDivB : pllFwdDiv) *
+		    pllFbkDiv) / pllFwdDivB);
+
+	np = find_node_by_alias("serial0");
+	if (getprop(np, "current-speed", &baud, sizeof(baud)) != sizeof(baud))
+		fatal("no current-speed property\n\r");
+
+	udiv = 256;			/* Assume lowest possible serial clk */
+	div = plloutb / (16 * baud); /* total divisor */
+	umin = (plloutb / freqOPB) << 1;	/* 2 x OPB divisor */
+	diff = 256;			/* highest possible */
+
+	/* i is the test udiv value -- start with the largest
+	 * possible (256) to minimize serial clock and constrain
+	 * search to umin.
+	 */
+	for (i = 256; i > umin; i--) {
+		ibdiv = div / i;
+		est = i * ibdiv;
+		idiff = (est > div) ? (est-div) : (div-est);
+		if (idiff == 0) {
+			udiv = i;
+			break;      /* can't do better */
+		} else if (idiff < diff) {
+			udiv = i;       /* best so far */
+			diff = idiff;   /* update lowest diff*/
+		}
+	}
+	freqUART = plloutb / udiv;
+
+	dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_intfreq, bd.bi_plb_busfreq);
+	dt_fixup_clock("/plb/ebc", freqEBC);
+	dt_fixup_clock("/plb/opb", freqOPB);
+	dt_fixup_clock("/plb/opb/serial@ef600300", freqUART);
+	dt_fixup_clock("/plb/opb/serial@ef600400", freqUART);
+}
+
+static void acadia_fixups(void)
+{
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	get_clocks();
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+}
+	
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = acadia_fixups;
+	platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/dtc-src/Makefile.dtc b/arch/powerpc/boot/dtc-src/Makefile.dtc
index d607fdb..6ddf9ec 100644
--- a/arch/powerpc/boot/dtc-src/Makefile.dtc
+++ b/arch/powerpc/boot/dtc-src/Makefile.dtc
@@ -5,21 +5,5 @@
 #
 DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \
 	checks.c
-DTC_EXTRA = dtc.h srcpos.h
-DTC_LEXFILES = dtc-lexer.l
-DTC_BISONFILES = dtc-parser.y
-
-DTC_LEX_SRCS = $(DTC_LEXFILES:%.l=%.lex.c)
-DTC_BISON_SRCS = $(DTC_BISONFILES:%.y=%.tab.c)
-DTC_BISON_INCLUDES = $(DTC_BISONFILES:%.y=%.tab.h)
-
-DTC_GEN_SRCS = $(DTC_LEX_SRCS) $(DTC_BISON_SRCS)
-DTC_GEN_ALL = $(DTC_GEN_SRCS) $(DTC_BISON_INCLUDES)
+DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c
 DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
-
-DTC_CLEANFILES = $(DTC_GEN_ALL)
-
-# We assume the containing Makefile system can do auto-dependencies for most
-# things, but we supply the dependencies on generated header files explicitly
-
-$(addprefix $(DTC_objdir)/,$(DTC_GEN_SRCS:%.c=%.o)): $(addprefix $(DTC_objdir)/,$(DTC_BISON_INCLUDES))
diff --git a/arch/powerpc/boot/dtc-src/checks.c b/arch/powerpc/boot/dtc-src/checks.c
index 2ce961c..9548579 100644
--- a/arch/powerpc/boot/dtc-src/checks.c
+++ b/arch/powerpc/boot/dtc-src/checks.c
@@ -242,6 +242,42 @@ static void check_duplicate_property_names(struct check *c, struct node *dt,
 }
 NODE_CHECK(duplicate_property_names, NULL, ERROR);
 
+#define LOWERCASE	"abcdefghijklmnopqrstuvwxyz"
+#define UPPERCASE	"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+#define DIGITS		"0123456789"
+#define PROPNODECHARS	LOWERCASE UPPERCASE DIGITS ",._+*#?-"
+
+static void check_node_name_chars(struct check *c, struct node *dt,
+				  struct node *node)
+{
+	int n = strspn(node->name, c->data);
+
+	if (n < strlen(node->name))
+		FAIL(c, "Bad character '%c' in node %s",
+		     node->name[n], node->fullpath);
+}
+NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR);
+
+static void check_node_name_format(struct check *c, struct node *dt,
+				   struct node *node)
+{
+	if (strchr(get_unitname(node), '@'))
+		FAIL(c, "Node %s has multiple '@' characters in name",
+		     node->fullpath);
+}
+NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars);
+
+static void check_property_name_chars(struct check *c, struct node *dt,
+				      struct node *node, struct property *prop)
+{
+	int n = strspn(prop->name, c->data);
+
+	if (n < strlen(prop->name))
+		FAIL(c, "Bad character '%c' in property name \"%s\", node %s",
+		     prop->name[n], prop->name, node->fullpath);
+}
+PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR);
+
 static void check_explicit_phandles(struct check *c, struct node *root,
 					  struct node *node)
 {
@@ -280,16 +316,29 @@ NODE_CHECK(explicit_phandles, NULL, ERROR);
 static void check_name_properties(struct check *c, struct node *root,
 				  struct node *node)
 {
-	struct property *prop;
+	struct property **pp, *prop = NULL;
+
+	for (pp = &node->proplist; *pp; pp = &((*pp)->next))
+		if (streq((*pp)->name, "name")) {
+			prop = *pp;
+			break;
+		}
 
-	prop = get_property(node, "name");
 	if (!prop)
 		return; /* No name property, that's fine */
 
 	if ((prop->val.len != node->basenamelen+1)
-	    || (memcmp(prop->val.val, node->name, node->basenamelen) != 0))
+	    || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) {
 		FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead"
 		     " of base node name)", node->fullpath, prop->val.val);
+	} else {
+		/* The name property is correct, and therefore redundant.
+		 * Delete it */
+		*pp = prop->next;
+		free(prop->name);
+		data_free(prop->val);
+		free(prop);
+	}
 }
 CHECK_IS_STRING(name_is_string, "name", ERROR);
 NODE_CHECK(name_properties, NULL, ERROR, &name_is_string);
@@ -301,23 +350,23 @@ NODE_CHECK(name_properties, NULL, ERROR, &name_is_string);
 static void fixup_phandle_references(struct check *c, struct node *dt,
 				     struct node *node, struct property *prop)
 {
-      struct marker *m = prop->val.markers;
-      struct node *refnode;
-      cell_t phandle;
-
-      for_each_marker_of_type(m, REF_PHANDLE) {
-	      assert(m->offset + sizeof(cell_t) <= prop->val.len);
-
-	      refnode = get_node_by_ref(dt, m->ref);
-	      if (! refnode) {
-		      FAIL(c, "Reference to non-existent node or label \"%s\"\n",
-			   m->ref);
-		      continue;
-	      }
-
-	      phandle = get_node_phandle(dt, refnode);
-	      *((cell_t *)(prop->val.val + m->offset)) = cpu_to_be32(phandle);
-      }
+	struct marker *m = prop->val.markers;
+	struct node *refnode;
+	cell_t phandle;
+
+	for_each_marker_of_type(m, REF_PHANDLE) {
+		assert(m->offset + sizeof(cell_t) <= prop->val.len);
+
+		refnode = get_node_by_ref(dt, m->ref);
+		if (! refnode) {
+			FAIL(c, "Reference to non-existent node or label \"%s\"\n",
+			     m->ref);
+			continue;
+		}
+
+		phandle = get_node_phandle(dt, refnode);
+		*((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle);
+	}
 }
 CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR,
       &duplicate_node_names, &explicit_phandles);
@@ -498,6 +547,7 @@ TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN);
 
 static struct check *check_table[] = {
 	&duplicate_node_names, &duplicate_property_names,
+	&node_name_chars, &node_name_format, &property_name_chars,
 	&name_is_string, &name_properties,
 	&explicit_phandles,
 	&phandle_references, &path_references,
@@ -511,10 +561,7 @@ static struct check *check_table[] = {
 	&obsolete_chosen_interrupt_controller,
 };
 
-int check_semantics(struct node *dt, int outversion, int boot_cpuid_phys);
-
-void process_checks(int force, struct boot_info *bi,
-		    int checkflag, int outversion, int boot_cpuid_phys)
+void process_checks(int force, struct boot_info *bi)
 {
 	struct node *dt = bi->dt;
 	int i;
@@ -537,214 +584,4 @@ void process_checks(int force, struct boot_info *bi,
 				"output forced\n");
 		}
 	}
-
-	if (checkflag) {
-		if (error) {
-			fprintf(stderr, "Warning: Skipping semantic checks due to structural errors\n");
-		} else {
-			if (!check_semantics(bi->dt, outversion,
-					     boot_cpuid_phys))
-				fprintf(stderr, "Warning: Input tree has semantic errors\n");
-		}
-	}
-}
-
-/*
- * Semantic check functions
- */
-
-#define ERRMSG(...) if (quiet < 2) fprintf(stderr, "ERROR: " __VA_ARGS__)
-#define WARNMSG(...) if (quiet < 1) fprintf(stderr, "Warning: " __VA_ARGS__)
-
-#define DO_ERR(...) do {ERRMSG(__VA_ARGS__); ok = 0; } while (0)
-
-#define CHECK_HAVE(node, propname) \
-	do { \
-		if (! (prop = get_property((node), (propname)))) \
-			DO_ERR("Missing \"%s\" property in %s\n", (propname), \
-				(node)->fullpath); \
-	} while (0);
-
-#define CHECK_HAVE_WARN(node, propname) \
-	do { \
-		if (! (prop  = get_property((node), (propname)))) \
-			WARNMSG("%s has no \"%s\" property\n", \
-				(node)->fullpath, (propname)); \
-	} while (0)
-
-#define CHECK_HAVE_STRING(node, propname) \
-	do { \
-		CHECK_HAVE((node), (propname)); \
-		if (prop && !data_is_one_string(prop->val)) \
-			DO_ERR("\"%s\" property in %s is not a string\n", \
-				(propname), (node)->fullpath); \
-	} while (0)
-
-#define CHECK_HAVE_STREQ(node, propname, value) \
-	do { \
-		CHECK_HAVE_STRING((node), (propname)); \
-		if (prop && !streq(prop->val.val, (value))) \
-			DO_ERR("%s has wrong %s, %s (should be %s\n", \
-				(node)->fullpath, (propname), \
-				prop->val.val, (value)); \
-	} while (0)
-
-#define CHECK_HAVE_ONECELL(node, propname) \
-	do { \
-		CHECK_HAVE((node), (propname)); \
-		if (prop && (prop->val.len != sizeof(cell_t))) \
-			DO_ERR("\"%s\" property in %s has wrong size %d (should be 1 cell)\n", (propname), (node)->fullpath, prop->val.len); \
-	} while (0)
-
-#define CHECK_HAVE_WARN_ONECELL(node, propname) \
-	do { \
-		CHECK_HAVE_WARN((node), (propname)); \
-		if (prop && (prop->val.len != sizeof(cell_t))) \
-			DO_ERR("\"%s\" property in %s has wrong size %d (should be 1 cell)\n", (propname), (node)->fullpath, prop->val.len); \
-	} while (0)
-
-#define CHECK_HAVE_WARN_PHANDLE(xnode, propname, root) \
-	do { \
-		struct node *ref; \
-		CHECK_HAVE_WARN_ONECELL((xnode), (propname)); \
-		if (prop) {\
-			cell_t phandle = propval_cell(prop); \
-			if ((phandle == 0) || (phandle == -1)) { \
-				DO_ERR("\"%s\" property in %s contains an invalid phandle %x\n", (propname), (xnode)->fullpath, phandle); \
-			} else { \
-				ref = get_node_by_phandle((root), propval_cell(prop)); \
-				if (! ref) \
-					DO_ERR("\"%s\" property in %s refers to non-existant phandle %x\n", (propname), (xnode)->fullpath, propval_cell(prop)); \
-			} \
-		} \
-	} while (0)
-
-#define CHECK_HAVE_WARN_STRING(node, propname) \
-	do { \
-		CHECK_HAVE_WARN((node), (propname)); \
-		if (prop && !data_is_one_string(prop->val)) \
-			DO_ERR("\"%s\" property in %s is not a string\n", \
-				(propname), (node)->fullpath); \
-	} while (0)
-
-static int check_root(struct node *root)
-{
-	struct property *prop;
-	int ok = 1;
-
-	CHECK_HAVE_STRING(root, "model");
-	CHECK_HAVE_WARN(root, "compatible");
-
-	return ok;
-}
-
-static int check_cpus(struct node *root, int outversion, int boot_cpuid_phys)
-{
-	struct node *cpus, *cpu;
-	struct property *prop;
-	struct node *bootcpu = NULL;
-	int ok = 1;
-
-	cpus = get_subnode(root, "cpus");
-	if (! cpus) {
-		ERRMSG("Missing /cpus node\n");
-		return 0;
-	}
-
-	if (cpus->addr_cells != 1)
-		DO_ERR("%s has bad #address-cells value %d (should be 1)\n",
-		       cpus->fullpath, cpus->addr_cells);
-	if (cpus->size_cells != 0)
-		DO_ERR("%s has bad #size-cells value %d (should be 0)\n",
-		       cpus->fullpath, cpus->size_cells);
-
-	for_each_child(cpus, cpu) {
-		CHECK_HAVE_STREQ(cpu, "device_type", "cpu");
-
-		CHECK_HAVE_ONECELL(cpu, "reg");
-		if (prop) {
-			cell_t unitnum;
-			char *eptr;
-
-			unitnum = strtol(get_unitname(cpu), &eptr, 16);
-			if (*eptr) {
-				WARNMSG("%s has bad format unit name %s (should be CPU number\n",
-					cpu->fullpath, get_unitname(cpu));
-			} else if (unitnum != propval_cell(prop)) {
-				WARNMSG("%s unit name \"%s\" does not match \"reg\" property <%x>\n",
-				       cpu->fullpath, get_unitname(cpu),
-				       propval_cell(prop));
-			}
-		}
-
-/* 		CHECK_HAVE_ONECELL(cpu, "d-cache-line-size"); */
-/* 		CHECK_HAVE_ONECELL(cpu, "i-cache-line-size"); */
-		CHECK_HAVE_ONECELL(cpu, "d-cache-size");
-		CHECK_HAVE_ONECELL(cpu, "i-cache-size");
-
-		CHECK_HAVE_WARN_ONECELL(cpu, "clock-frequency");
-		CHECK_HAVE_WARN_ONECELL(cpu, "timebase-frequency");
-
-		prop = get_property(cpu, "linux,boot-cpu");
-		if (prop) {
-			if (prop->val.len)
-				WARNMSG("\"linux,boot-cpu\" property in %s is non-empty\n",
-					cpu->fullpath);
-			if (bootcpu)
-				DO_ERR("Multiple boot cpus (%s and %s)\n",
-				       bootcpu->fullpath, cpu->fullpath);
-			else
-				bootcpu = cpu;
-		}
-	}
-
-	if (outversion < 2) {
-		if (! bootcpu)
-			WARNMSG("No cpu has \"linux,boot-cpu\" property\n");
-	} else {
-		if (bootcpu)
-			WARNMSG("\"linux,boot-cpu\" property is deprecated in blob version 2 or higher\n");
-		if (boot_cpuid_phys == 0xfeedbeef)
-			WARNMSG("physical boot CPU not set.  Use -b option to set\n");
-	}
-
-	return ok;
-}
-
-static int check_memory(struct node *root)
-{
-	struct node *mem;
-	struct property *prop;
-	int nnodes = 0;
-	int ok = 1;
-
-	for_each_child(root, mem) {
-		if (! strneq(mem->name, "memory", mem->basenamelen))
-			continue;
-
-		nnodes++;
-
-		CHECK_HAVE_STREQ(mem, "device_type", "memory");
-		CHECK_HAVE(mem, "reg");
-	}
-
-	if (nnodes == 0) {
-		ERRMSG("No memory nodes\n");
-		return 0;
-	}
-
-	return ok;
-}
-
-int check_semantics(struct node *dt, int outversion, int boot_cpuid_phys)
-{
-	int ok = 1;
-
-	ok = ok && check_root(dt);
-	ok = ok && check_cpus(dt, outversion, boot_cpuid_phys);
-	ok = ok && check_memory(dt);
-	if (! ok)
-		return 0;
-
-	return 1;
 }
diff --git a/arch/powerpc/boot/dtc-src/data.c b/arch/powerpc/boot/dtc-src/data.c
index a94718c..dd2e3d3 100644
--- a/arch/powerpc/boot/dtc-src/data.c
+++ b/arch/powerpc/boot/dtc-src/data.c
@@ -32,8 +32,6 @@ void data_free(struct data d)
 		m = nm;
 	}
 
-	assert(!d.val || d.asize);
-
 	if (d.val)
 		free(d.val);
 }
@@ -43,9 +41,6 @@ struct data data_grow_for(struct data d, int xlen)
 	struct data nd;
 	int newsize;
 
-	/* we must start with an allocated datum */
-	assert(!d.val || d.asize);
-
 	if (xlen == 0)
 		return d;
 
@@ -56,11 +51,8 @@ struct data data_grow_for(struct data d, int xlen)
 	while ((d.len + xlen) > newsize)
 		newsize *= 2;
 
-	nd.asize = newsize;
 	nd.val = xrealloc(d.val, newsize);
 
-	assert(nd.asize >= (d.len + xlen));
-
 	return nd;
 }
 
@@ -83,16 +75,11 @@ static char get_oct_char(const char *s, int *i)
 	long val;
 
 	x[3] = '\0';
-	x[0] = s[(*i)];
-	if (x[0]) {
-		x[1] = s[(*i)+1];
-		if (x[1])
-			x[2] = s[(*i)+2];
-	}
+	strncpy(x, s + *i, 3);
 
 	val = strtol(x, &endx, 8);
-	if ((endx - x) == 0)
-		fprintf(stderr, "Empty \\nnn escape\n");
+
+	assert(endx > x);
 
 	(*i) += endx - x;
 	return val;
@@ -105,13 +92,11 @@ static char get_hex_char(const char *s, int *i)
 	long val;
 
 	x[2] = '\0';
-	x[0] = s[(*i)];
-	if (x[0])
-		x[1] = s[(*i)+1];
+	strncpy(x, s + *i, 2);
 
 	val = strtol(x, &endx, 16);
-	if ((endx - x) == 0)
-		fprintf(stderr, "Empty \\x escape\n");
+	if (!(endx  > x))
+		die("\\x used with no following hex digits\n");
 
 	(*i) += endx - x;
 	return val;
@@ -182,14 +167,29 @@ struct data data_copy_escape_string(const char *s, int len)
 	return d;
 }
 
-struct data data_copy_file(FILE *f, size_t len)
+struct data data_copy_file(FILE *f, size_t maxlen)
 {
-	struct data d;
+	struct data d = empty_data;
 
-	d = data_grow_for(empty_data, len);
+	while (!feof(f) && (d.len < maxlen)) {
+		size_t chunksize, ret;
 
-	d.len = len;
-	fread(d.val, len, 1, f);
+		if (maxlen == -1)
+			chunksize = 4096;
+		else
+			chunksize = maxlen - d.len;
+
+		d = data_grow_for(d, chunksize);
+		ret = fread(d.val + d.len, 1, chunksize, f);
+
+		if (ferror(f))
+			die("Error reading file into data: %s", strerror(errno));
+
+		if (d.len + ret < d.len)
+			die("Overflow reading file into data\n");
+
+		d.len += ret;
+	}
 
 	return d;
 }
@@ -247,7 +247,7 @@ struct data data_merge(struct data d1, struct data d2)
 
 struct data data_append_cell(struct data d, cell_t word)
 {
-	cell_t beword = cpu_to_be32(word);
+	cell_t beword = cpu_to_fdt32(word);
 
 	return data_append_data(d, &beword, sizeof(beword));
 }
@@ -256,15 +256,15 @@ struct data data_append_re(struct data d, const struct fdt_reserve_entry *re)
 {
 	struct fdt_reserve_entry bere;
 
-	bere.address = cpu_to_be64(re->address);
-	bere.size = cpu_to_be64(re->size);
+	bere.address = cpu_to_fdt64(re->address);
+	bere.size = cpu_to_fdt64(re->size);
 
 	return data_append_data(d, &bere, sizeof(bere));
 }
 
-struct data data_append_addr(struct data d, u64 addr)
+struct data data_append_addr(struct data d, uint64_t addr)
 {
-	u64 beaddr = cpu_to_be64(addr);
+	uint64_t beaddr = cpu_to_fdt64(addr);
 
 	return data_append_data(d, &beaddr, sizeof(beaddr));
 }
diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.l b/arch/powerpc/boot/dtc-src/dtc-lexer.l
index c811b22..44dbfd3 100644
--- a/arch/powerpc/boot/dtc-src/dtc-lexer.l
+++ b/arch/powerpc/boot/dtc-src/dtc-lexer.l
@@ -28,6 +28,10 @@
 PROPNODECHAR	[a-zA-Z0-9,._+*#?@-]
 PATHCHAR	({PROPNODECHAR}|[/])
 LABEL		[a-zA-Z_][a-zA-Z0-9_]*
+STRING		\"([^\\"]|\\.)*\"
+WS		[[:space:]]
+COMMENT		"/*"([^*]|\*+[^*/])*\*+"/"
+LINECOMMENT	"//".*\n
 
 %{
 #include "dtc.h"
@@ -52,29 +56,26 @@ static int dts_version; /* = 0 */
 				DPRINT("<V1>\n"); \
 				BEGIN(V1); \
 			}
+
+static void push_input_file(const char *filename);
+static int pop_input_file(void);
 %}
 
 %%
-<*>"/include/"		BEGIN(INCLUDE);
-
-<INCLUDE>\"[^"\n]*\"	{
-			yytext[strlen(yytext) - 1] = 0;
-			if (!push_input_file(yytext + 1)) {
-				/* Some unrecoverable error.*/
-				exit(1);
-			}
-			BEGIN_DEFAULT();
+<*>"/include/"{WS}*{STRING} {
+			char *name = strchr(yytext, '\"') + 1;
+			yytext[yyleng-1] = '\0';
+			push_input_file(name);
 		}
 
-
 <*><<EOF>>		{
 			if (!pop_input_file()) {
 				yyterminate();
 			}
 		}
 
-<*>\"([^\\"]|\\.)*\"	{
-			yylloc.filenum = srcpos_filenum;
+<*>{STRING}	{
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("String: %s\n", yytext);
 			yylval.data = data_copy_escape_string(yytext+1,
@@ -84,7 +85,7 @@ static int dts_version; /* = 0 */
 		}
 
 <*>"/dts-v1/"	{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Keyword: /dts-v1/\n");
 			dts_version = 1;
@@ -93,7 +94,7 @@ static int dts_version; /* = 0 */
 		}
 
 <*>"/memreserve/"	{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Keyword: /memreserve/\n");
 			BEGIN_DEFAULT();
@@ -101,7 +102,7 @@ static int dts_version; /* = 0 */
 		}
 
 <*>{LABEL}:	{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Label: %s\n", yytext);
 			yylval.labelref = strdup(yytext);
@@ -110,7 +111,7 @@ static int dts_version; /* = 0 */
 		}
 
 <INITIAL>[bodh]# {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			if (*yytext == 'b')
 				yylval.cbase = 2;
@@ -125,7 +126,7 @@ static int dts_version; /* = 0 */
 		}
 
 <INITIAL>[0-9a-fA-F]+	{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yylval.literal = strdup(yytext);
 			DPRINT("Literal: '%s'\n", yylval.literal);
@@ -133,7 +134,7 @@ static int dts_version; /* = 0 */
 		}
 
 <V1>[0-9]+|0[xX][0-9a-fA-F]+      {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yylval.literal = strdup(yytext);
 			DPRINT("Literal: '%s'\n", yylval.literal);
@@ -141,7 +142,7 @@ static int dts_version; /* = 0 */
 		}
 
 \&{LABEL}	{	/* label reference */
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Ref: %s\n", yytext+1);
 			yylval.labelref = strdup(yytext+1);
@@ -149,7 +150,7 @@ static int dts_version; /* = 0 */
 		}
 
 "&{/"{PATHCHAR}+\}	{	/* new-style path reference */
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yytext[yyleng-1] = '\0';
 			DPRINT("Ref: %s\n", yytext+2);
@@ -158,7 +159,7 @@ static int dts_version; /* = 0 */
 		}
 
 <INITIAL>"&/"{PATHCHAR}+ {	/* old-style path reference */
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Ref: %s\n", yytext+1);
 			yylval.labelref = strdup(yytext+1);
@@ -166,7 +167,7 @@ static int dts_version; /* = 0 */
 		}
 
 <BYTESTRING>[0-9a-fA-F]{2} {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yylval.byte = strtol(yytext, NULL, 16);
 			DPRINT("Byte: %02x\n", (int)yylval.byte);
@@ -174,7 +175,7 @@ static int dts_version; /* = 0 */
 		}
 
 <BYTESTRING>"]"	{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("/BYTESTRING\n");
 			BEGIN_DEFAULT();
@@ -182,7 +183,7 @@ static int dts_version; /* = 0 */
 		}
 
 <PROPNODENAME>{PROPNODECHAR}+ {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("PropNodeName: %s\n", yytext);
 			yylval.propnodename = strdup(yytext);
@@ -190,20 +191,19 @@ static int dts_version; /* = 0 */
 			return DT_PROPNODENAME;
 		}
 
-
-<*>[[:space:]]+	/* eat whitespace */
-
-<*>"/*"([^*]|\*+[^*/])*\*+"/"	{
-			yylloc.filenum = srcpos_filenum;
+"/incbin/"	{
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
-			DPRINT("Comment: %s\n", yytext);
-			/* eat comments */
+			DPRINT("Binary Include\n");
+			return DT_INCBIN;
 		}
 
-<*>"//".*\n	/* eat line comments */
+<*>{WS}+	/* eat whitespace */
+<*>{COMMENT}+	/* eat C-style comments */
+<*>{LINECOMMENT}+ /* eat C++-style comments */
 
 <*>.		{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Char: %c (\\x%02x)\n", yytext[0],
 				(unsigned)yytext[0]);
@@ -227,14 +227,13 @@ static int dts_version; /* = 0 */
  */
 
 struct incl_file {
-	int filenum;
-	FILE *file;
+	struct dtc_file *file;
 	YY_BUFFER_STATE yy_prev_buf;
 	int yy_prev_lineno;
 	struct incl_file *prev;
 };
 
-struct incl_file *incl_file_stack;
+static struct incl_file *incl_file_stack;
 
 
 /*
@@ -245,36 +244,34 @@ struct incl_file *incl_file_stack;
 static int incl_depth = 0;
 
 
-int push_input_file(const char *filename)
+static void push_input_file(const char *filename)
 {
-	FILE *f;
 	struct incl_file *incl_file;
+	struct dtc_file *newfile;
+	struct search_path search, *searchptr = NULL;
 
-	if (!filename) {
-		yyerror("No include file name given.");
-		return 0;
-	}
+	assert(filename);
 
-	if (incl_depth++ >= MAX_INCLUDE_DEPTH) {
-		yyerror("Includes nested too deeply");
-		return 0;
+	if (incl_depth++ >= MAX_INCLUDE_DEPTH)
+		die("Includes nested too deeply");
+
+	if (srcpos_file) {
+		search.dir = srcpos_file->dir;
+		search.next = NULL;
+		search.prev = NULL;
+		searchptr = &search;
 	}
 
-	f = dtc_open_file(filename);
+	newfile = dtc_open_file(filename, searchptr);
 
-	incl_file = malloc(sizeof(struct incl_file));
-	if (!incl_file) {
-		yyerror("Can not allocate include file space.");
-		return 0;
-	}
+	incl_file = xmalloc(sizeof(struct incl_file));
 
 	/*
 	 * Save current context.
 	 */
 	incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
 	incl_file->yy_prev_lineno = yylineno;
-	incl_file->filenum = srcpos_filenum;
-	incl_file->file = yyin;
+	incl_file->file = srcpos_file;
 	incl_file->prev = incl_file_stack;
 
 	incl_file_stack = incl_file;
@@ -282,23 +279,21 @@ int push_input_file(const char *filename)
 	/*
 	 * Establish new context.
 	 */
-	srcpos_filenum = lookup_file_name(filename, 0);
+	srcpos_file = newfile;
 	yylineno = 1;
-	yyin = f;
+	yyin = newfile->file;
 	yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
-
-	return 1;
 }
 
 
-int pop_input_file(void)
+static int pop_input_file(void)
 {
 	struct incl_file *incl_file;
 
 	if (incl_file_stack == 0)
 		return 0;
 
-	fclose(yyin);
+	dtc_close_file(srcpos_file);
 
 	/*
 	 * Pop.
@@ -313,16 +308,13 @@ int pop_input_file(void)
 	yy_delete_buffer(YY_CURRENT_BUFFER);
 	yy_switch_to_buffer(incl_file->yy_prev_buf);
 	yylineno = incl_file->yy_prev_lineno;
-	srcpos_filenum = incl_file->filenum;
-	yyin = incl_file->file;
+	srcpos_file = incl_file->file;
+	yyin = incl_file->file ? incl_file->file->file : NULL;
 
 	/*
 	 * Free old state.
 	 */
 	free(incl_file);
 
-	if (YY_CURRENT_BUFFER == 0)
-		return 0;
-
 	return 1;
 }
diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped b/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
index d0f7424..ac392cb 100644
--- a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
+++ b/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
@@ -9,7 +9,7 @@
 #define FLEX_SCANNER
 #define YY_FLEX_MAJOR_VERSION 2
 #define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 33
+#define YY_FLEX_SUBMINOR_VERSION 34
 #if YY_FLEX_SUBMINOR_VERSION > 0
 #define FLEX_BETA
 #endif
@@ -31,7 +31,7 @@
 
 /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
 
-#if __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
 
 /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
  * if you want the limit (max/min) macros for int types. 
@@ -94,11 +94,12 @@ typedef unsigned int flex_uint32_t;
 
 #else	/* ! __cplusplus */
 
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
 
 #define YY_USE_CONST
 
-#endif	/* __STDC__ */
+#endif	/* defined (__STDC__) */
 #endif	/* ! __cplusplus */
 
 #ifdef YY_USE_CONST
@@ -194,11 +195,13 @@ extern FILE *yyin, *yyout;
 /* The following is because we cannot portably get our hands on size_t
  * (without autoconf's help, which isn't available because we want
  * flex-generated scanners to compile on their own).
+ * Given that the standard has decreed that size_t exists since 1989,
+ * I guess we can afford to depend on it. Manoj.
  */
 
 #ifndef YY_TYPEDEF_YY_SIZE_T
 #define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
 #endif
 
 #ifndef YY_STRUCT_YY_BUFFER_STATE
@@ -349,7 +352,7 @@ void yyfree (void *  );
 
 /* Begin user sect3 */
 
-#define yywrap() 1
+#define yywrap(n) 1
 #define YY_SKIP_YYWRAP
 
 typedef unsigned char YY_CHAR;
@@ -389,19 +392,20 @@ struct yy_trans_info
 	flex_int32_t yy_verify;
 	flex_int32_t yy_nxt;
 	};
-static yyconst flex_int16_t yy_accept[94] =
+static yyconst flex_int16_t yy_accept[104] =
     {   0,
         0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-       21,   19,   16,   16,   19,   19,   19,    8,    8,   19,
-        8,   19,   19,   19,   19,   14,   15,   15,   19,    9,
-        9,   16,    0,    3,    0,    0,   10,    0,    0,    0,
-        0,    0,    0,    8,    8,    6,    0,    7,    0,    2,
-        0,   13,   13,   15,   15,    9,    0,   12,   10,    0,
-        0,    0,    0,   18,    0,    0,    0,    2,    9,    0,
-       17,    0,    0,    0,   11,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    4,    0,    0,    1,    0,    0,
-        0,    5,    0
-
+       21,   19,   16,   16,   19,   19,   19,    7,    7,   19,
+        7,   19,   19,   19,   19,   13,   14,   14,   19,    8,
+        8,   16,    0,    2,    0,    0,    9,    0,    0,    0,
+        0,    0,    0,    7,    7,    5,    0,    6,    0,   12,
+       12,   14,   14,    8,    0,   11,    9,    0,    0,    0,
+        0,   18,    0,    0,    0,    0,    8,    0,   17,    0,
+        0,    0,    0,    0,   10,    0,    0,    0,    0,    0,
+        0,    0,    0,    0,    0,    0,    0,    0,    3,   15,
+        0,    0,    0,    0,    0,    0,    0,    0,    1,    0,
+
+        0,    4,    0
     } ;
 
 static yyconst flex_int32_t yy_ec[256] =
@@ -444,122 +448,126 @@ static yyconst flex_int32_t yy_meta[36] =
         7,    7,    7,    8,    1
     } ;
 
-static yyconst flex_int16_t yy_base[107] =
+static yyconst flex_int16_t yy_base[117] =
     {   0,
-        0,    0,   32,    0,   53,    0,   76,    0,  108,  111,
-      280,  288,   37,   39,   33,   36,  106,    0,  123,  146,
-      255,  251,   45,    0,  159,  288,    0,   53,  108,  172,
-      114,  127,  158,  288,  245,    0,    0,  234,  235,  236,
-      197,  195,  199,    0,    0,  288,    0,  288,  160,  288,
-      183,  288,    0,    0,  183,  182,    0,    0,    0,    0,
-      204,  189,  207,  288,  179,  187,  180,  194,    0,  171,
-      288,  196,  178,  174,  288,  169,  169,  177,  165,  153,
-      143,  155,  137,  118,  288,  122,   42,  288,   36,   36,
-       40,  288,  288,  212,  218,  223,  229,  234,  239,  245,
-
-      251,  255,  262,  270,  275,  280
+        0,    0,   30,    0,   44,    0,   67,    0,   97,  105,
+      302,  303,   35,   44,   40,   94,  112,    0,  129,  152,
+      296,  295,  159,    0,  176,  303,    0,  116,   95,  165,
+       49,   46,  102,  303,  296,    0,    0,  288,  290,  293,
+      264,  266,  270,    0,    0,  303,    0,  303,  264,  303,
+        0,    0,  195,  101,    0,    0,    0,    0,  284,  125,
+      277,  265,  225,  230,  216,  218,    0,  202,  224,  221,
+      217,  107,  196,  188,  303,  206,  179,  186,  178,  185,
+      183,  162,  161,  150,  169,  160,  145,  125,  303,  303,
+      137,  109,  190,  103,  203,  167,  108,  197,  303,  123,
+
+       29,  303,  303,  215,  221,  226,  229,  234,  240,  246,
+      250,  257,  265,  270,  275,  282
     } ;
 
-static yyconst flex_int16_t yy_def[107] =
+static yyconst flex_int16_t yy_def[117] =
     {   0,
-       93,    1,    1,    3,    3,    5,   93,    7,    3,    3,
-       93,   93,   93,   93,   94,   95,   93,   96,   93,   19,
-       19,   20,   97,   98,   20,   93,   99,  100,   95,   93,
-       93,   93,   94,   93,   94,  101,  102,   93,  103,  104,
-       93,   93,   93,   96,   19,   93,   20,   93,   97,   93,
-       97,   93,   20,   99,  100,   93,  105,  101,  102,  106,
-      103,  103,  104,   93,   93,   93,   93,   94,  105,  106,
-       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
-       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
-       93,   93,    0,   93,   93,   93,   93,   93,   93,   93,
-
-       93,   93,   93,   93,   93,   93
+      103,    1,    1,    3,    3,    5,  103,    7,    3,    3,
+      103,  103,  103,  103,  104,  105,  103,  106,  103,   19,
+       19,   20,  103,  107,   20,  103,  108,  109,  105,  103,
+      103,  103,  104,  103,  104,  110,  111,  103,  112,  113,
+      103,  103,  103,  106,   19,  103,   20,  103,  103,  103,
+       20,  108,  109,  103,  114,  110,  111,  115,  112,  112,
+      113,  103,  103,  103,  103,  103,  114,  115,  103,  103,
+      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
+      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
+      103,  103,  103,  103,  103,  116,  103,  116,  103,  116,
+
+      103,  103,    0,  103,  103,  103,  103,  103,  103,  103,
+      103,  103,  103,  103,  103,  103
     } ;
 
-static yyconst flex_int16_t yy_nxt[324] =
+static yyconst flex_int16_t yy_nxt[339] =
     {   0,
        12,   13,   14,   15,   12,   16,   12,   12,   12,   17,
        18,   18,   18,   12,   19,   20,   20,   12,   12,   21,
        19,   21,   19,   22,   20,   20,   20,   20,   20,   20,
-       20,   20,   20,   12,   12,   23,   34,   12,   32,   32,
-       32,   32,   12,   12,   12,   36,   20,   33,   50,   92,
-       35,   20,   20,   20,   20,   20,   15,   54,   91,   54,
-       54,   54,   51,   24,   24,   24,   46,   25,   90,   38,
-       89,   26,   25,   25,   25,   25,   12,   13,   14,   15,
-       27,   12,   27,   27,   27,   17,   27,   27,   27,   12,
-       28,   28,   28,   12,   12,   28,   28,   28,   28,   28,
-
-       28,   28,   28,   28,   28,   28,   28,   28,   28,   12,
-       12,   15,   39,   29,   15,   40,   29,   93,   30,   31,
-       31,   30,   31,   31,   56,   56,   56,   41,   32,   32,
-       42,   88,   43,   45,   45,   45,   46,   45,   47,   47,
-       87,   38,   45,   45,   45,   45,   47,   47,   47,   47,
-       47,   47,   47,   47,   47,   47,   47,   47,   47,   86,
-       47,   34,   33,   50,   85,   47,   47,   47,   47,   53,
-       53,   53,   84,   53,   83,   35,   82,   51,   53,   53,
-       53,   53,   56,   56,   56,   93,   68,   54,   57,   54,
-       54,   54,   56,   56,   56,   62,   46,   34,   71,   81,
-
-       80,   79,   78,   77,   76,   75,   74,   73,   72,   64,
-       62,   35,   33,   33,   33,   33,   33,   33,   33,   33,
-       37,   67,   66,   37,   37,   37,   44,   65,   44,   49,
-       49,   49,   49,   49,   49,   49,   49,   52,   64,   52,
-       54,   62,   54,   60,   54,   54,   55,   93,   55,   55,
-       55,   55,   58,   58,   58,   48,   58,   58,   59,   48,
-       59,   59,   61,   61,   61,   61,   61,   61,   61,   61,
-       63,   63,   63,   63,   63,   63,   63,   63,   69,   93,
-       69,   70,   70,   70,   93,   70,   70,   11,   93,   93,
-       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
-
-       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
-       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
-       93,   93,   93
+       20,   20,   20,   12,   12,   12,   32,   32,  102,   23,
+       12,   12,   12,   34,   20,   32,   32,   32,   32,   20,
+       20,   20,   20,   20,   24,   24,   24,   35,   25,   54,
+       54,   54,   26,   25,   25,   25,   25,   12,   13,   14,
+       15,   27,   12,   27,   27,   27,   23,   27,   27,   27,
+       12,   28,   28,   28,   12,   12,   28,   28,   28,   28,
+       28,   28,   28,   28,   28,   28,   28,   28,   28,   28,
+
+       12,   12,   29,   36,  103,   34,   17,   30,   31,   31,
+       29,   54,   54,   54,   17,   30,   31,   31,   39,   35,
+       52,   40,   52,   52,   52,  103,   78,   38,   38,   46,
+      101,   60,   79,   41,   69,   97,   42,   94,   43,   45,
+       45,   45,   46,   45,   47,   47,   93,   92,   45,   45,
+       45,   45,   47,   47,   47,   47,   47,   47,   47,   47,
+       47,   47,   47,   47,   47,   39,   47,   91,   40,   90,
+       99,   47,   47,   47,   47,   54,   54,   54,   89,   88,
+       41,   55,   87,   49,  100,   43,   51,   51,   51,   86,
+       51,   95,   95,   96,   85,   51,   51,   51,   51,   52,
+
+       99,   52,   52,   52,   95,   95,   96,   84,   46,   83,
+       82,   81,   39,   79,  100,   33,   33,   33,   33,   33,
+       33,   33,   33,   37,   80,   77,   37,   37,   37,   44,
+       40,   44,   50,   76,   50,   52,   75,   52,   74,   52,
+       52,   53,   73,   53,   53,   53,   53,   56,   56,   56,
+       72,   56,   56,   57,   71,   57,   57,   59,   59,   59,
+       59,   59,   59,   59,   59,   61,   61,   61,   61,   61,
+       61,   61,   61,   67,   70,   67,   68,   68,   68,   62,
+       68,   68,   98,   98,   98,   98,   98,   98,   98,   98,
+       60,   66,   65,   64,   63,   62,   60,   58,  103,   48,
+
+       48,  103,   11,  103,  103,  103,  103,  103,  103,  103,
+      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
+      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
+      103,  103,  103,  103,  103,  103,  103,  103
     } ;
 
-static yyconst flex_int16_t yy_chk[324] =
+static yyconst flex_int16_t yy_chk[339] =
     {   0,
         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    3,   15,    3,   13,   13,
-       14,   14,    3,    3,    3,   16,    3,   23,   23,   91,
-       15,    3,    3,    3,    3,    3,    5,   28,   90,   28,
-       28,   28,   23,    5,    5,    5,   28,    5,   89,   16,
-       87,    5,    5,    5,    5,    5,    7,    7,    7,    7,
+        1,    1,    1,    1,    1,    3,   13,   13,  101,    3,
+        3,    3,    3,   15,    3,   14,   14,   32,   32,    3,
+        3,    3,    3,    3,    5,    5,    5,   15,    5,   31,
+       31,   31,    5,    5,    5,    5,    5,    7,    7,    7,
         7,    7,    7,    7,    7,    7,    7,    7,    7,    7,
         7,    7,    7,    7,    7,    7,    7,    7,    7,    7,
-
         7,    7,    7,    7,    7,    7,    7,    7,    7,    7,
-        7,    9,   17,    9,   10,   17,   10,   29,    9,    9,
-        9,   10,   10,   10,   31,   31,   31,   17,   32,   32,
-       17,   86,   17,   19,   19,   19,   19,   19,   19,   19,
-       84,   29,   19,   19,   19,   19,   19,   19,   19,   19,
-       19,   19,   19,   19,   19,   19,   20,   20,   20,   83,
-       20,   33,   49,   49,   82,   20,   20,   20,   20,   25,
-       25,   25,   81,   25,   80,   33,   79,   49,   25,   25,
-       25,   25,   30,   30,   30,   51,   51,   55,   30,   55,
-       55,   55,   56,   56,   56,   62,   55,   68,   62,   78,
-
-       77,   76,   74,   73,   72,   70,   67,   66,   65,   63,
-       61,   68,   94,   94,   94,   94,   94,   94,   94,   94,
-       95,   43,   42,   95,   95,   95,   96,   41,   96,   97,
-       97,   97,   97,   97,   97,   97,   97,   98,   40,   98,
-       99,   39,   99,   38,   99,   99,  100,   35,  100,  100,
-      100,  100,  101,  101,  101,   22,  101,  101,  102,   21,
-      102,  102,  103,  103,  103,  103,  103,  103,  103,  103,
-      104,  104,  104,  104,  104,  104,  104,  104,  105,   11,
-      105,  106,  106,  106,    0,  106,  106,   93,   93,   93,
-       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
-
-       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
-       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
-       93,   93,   93
+
+        7,    7,    9,   16,   29,   33,    9,    9,    9,    9,
+       10,   54,   54,   54,   10,   10,   10,   10,   17,   33,
+       28,   17,   28,   28,   28,  100,   72,   16,   29,   28,
+       97,   60,   72,   17,   60,   94,   17,   92,   17,   19,
+       19,   19,   19,   19,   19,   19,   91,   88,   19,   19,
+       19,   19,   19,   19,   19,   19,   19,   19,   19,   19,
+       19,   19,   20,   20,   20,   23,   20,   87,   23,   86,
+       96,   20,   20,   20,   20,   30,   30,   30,   85,   84,
+       23,   30,   83,   23,   96,   23,   25,   25,   25,   82,
+       25,   93,   93,   93,   81,   25,   25,   25,   25,   53,
+
+       98,   53,   53,   53,   95,   95,   95,   80,   53,   79,
+       78,   77,   76,   74,   98,  104,  104,  104,  104,  104,
+      104,  104,  104,  105,   73,   71,  105,  105,  105,  106,
+       70,  106,  107,   69,  107,  108,   68,  108,   66,  108,
+      108,  109,   65,  109,  109,  109,  109,  110,  110,  110,
+       64,  110,  110,  111,   63,  111,  111,  112,  112,  112,
+      112,  112,  112,  112,  112,  113,  113,  113,  113,  113,
+      113,  113,  113,  114,   62,  114,  115,  115,  115,   61,
+      115,  115,  116,  116,  116,  116,  116,  116,  116,  116,
+       59,   49,   43,   42,   41,   40,   39,   38,   35,   22,
+
+       21,   11,  103,  103,  103,  103,  103,  103,  103,  103,
+      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
+      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
+      103,  103,  103,  103,  103,  103,  103,  103
     } ;
 
 /* Table of booleans, true if rule could match eol. */
 static yyconst flex_int32_t yy_rule_can_match_eol[21] =
     {   0,
-0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 
+1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 
     0,     };
 
 static yy_state_type yy_last_accepting_state;
@@ -600,7 +608,7 @@ char *yytext;
 
 
 
-#line 33 "dtc-lexer.l"
+#line 37 "dtc-lexer.l"
 #include "dtc.h"
 #include "srcpos.h"
 #include "dtc-parser.tab.h"
@@ -623,7 +631,10 @@ static int dts_version; /* = 0 */
 				DPRINT("<V1>\n"); \
 				BEGIN(V1); \
 			}
-#line 627 "dtc-lexer.lex.c"
+
+static void push_input_file(const char *filename);
+static int pop_input_file(void);
+#line 638 "dtc-lexer.lex.c"
 
 #define INITIAL 0
 #define INCLUDE 1
@@ -685,7 +696,7 @@ static int input (void );
 /* This used to be an fputs(), but since the string might contain NUL's,
  * we now use fwrite().
  */
-#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
+#define ECHO fwrite( yytext, yyleng, 1, yyout )
 #endif
 
 /* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
@@ -696,7 +707,7 @@ static int input (void );
 	if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
 		{ \
 		int c = '*'; \
-		size_t n; \
+		int n; \
 		for ( n = 0; n < max_size && \
 			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
 			buf[n] = (char) c; \
@@ -778,9 +789,9 @@ YY_DECL
 	register char *yy_cp, *yy_bp;
 	register int yy_act;
     
-#line 57 "dtc-lexer.l"
+#line 64 "dtc-lexer.l"
 
-#line 784 "dtc-lexer.lex.c"
+#line 795 "dtc-lexer.lex.c"
 
 	if ( !(yy_init) )
 		{
@@ -833,13 +844,13 @@ yy_match:
 			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
 				{
 				yy_current_state = (int) yy_def[yy_current_state];
-				if ( yy_current_state >= 94 )
+				if ( yy_current_state >= 104 )
 					yy_c = yy_meta[(unsigned int) yy_c];
 				}
 			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
 			++yy_cp;
 			}
-		while ( yy_base[yy_current_state] != 288 );
+		while ( yy_base[yy_current_state] != 303 );
 
 yy_find_action:
 		yy_act = yy_accept[yy_current_state];
@@ -874,20 +885,13 @@ do_action:	/* This label is used only to access EOF actions. */
 			goto yy_find_action;
 
 case 1:
+/* rule 1 can match eol */
 YY_RULE_SETUP
-#line 58 "dtc-lexer.l"
-BEGIN(INCLUDE);
-	YY_BREAK
-case 2:
-YY_RULE_SETUP
-#line 60 "dtc-lexer.l"
+#line 65 "dtc-lexer.l"
 {
-			yytext[strlen(yytext) - 1] = 0;
-			if (!push_input_file(yytext + 1)) {
-				/* Some unrecoverable error.*/
-				exit(1);
-			}
-			BEGIN_DEFAULT();
+			char *name = strchr(yytext, '\"') + 1;
+			yytext[yyleng-1] = '\0';
+			push_input_file(name);
 		}
 	YY_BREAK
 case YY_STATE_EOF(INITIAL):
@@ -895,19 +899,19 @@ case YY_STATE_EOF(INCLUDE):
 case YY_STATE_EOF(BYTESTRING):
 case YY_STATE_EOF(PROPNODENAME):
 case YY_STATE_EOF(V1):
-#line 70 "dtc-lexer.l"
+#line 71 "dtc-lexer.l"
 {
 			if (!pop_input_file()) {
 				yyterminate();
 			}
 		}
 	YY_BREAK
-case 3:
-/* rule 3 can match eol */
+case 2:
+/* rule 2 can match eol */
 YY_RULE_SETUP
-#line 76 "dtc-lexer.l"
+#line 77 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("String: %s\n", yytext);
 			yylval.data = data_copy_escape_string(yytext+1,
@@ -916,11 +920,11 @@ YY_RULE_SETUP
 			return DT_STRING;
 		}
 	YY_BREAK
-case 4:
+case 3:
 YY_RULE_SETUP
-#line 86 "dtc-lexer.l"
+#line 87 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Keyword: /dts-v1/\n");
 			dts_version = 1;
@@ -928,22 +932,22 @@ YY_RULE_SETUP
 			return DT_V1;
 		}
 	YY_BREAK
-case 5:
+case 4:
 YY_RULE_SETUP
-#line 95 "dtc-lexer.l"
+#line 96 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Keyword: /memreserve/\n");
 			BEGIN_DEFAULT();
 			return DT_MEMRESERVE;
 		}
 	YY_BREAK
-case 6:
+case 5:
 YY_RULE_SETUP
-#line 103 "dtc-lexer.l"
+#line 104 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Label: %s\n", yytext);
 			yylval.labelref = strdup(yytext);
@@ -951,11 +955,11 @@ YY_RULE_SETUP
 			return DT_LABEL;
 		}
 	YY_BREAK
-case 7:
+case 6:
 YY_RULE_SETUP
-#line 112 "dtc-lexer.l"
+#line 113 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			if (*yytext == 'b')
 				yylval.cbase = 2;
@@ -969,44 +973,44 @@ YY_RULE_SETUP
 			return DT_BASE;
 		}
 	YY_BREAK
-case 8:
+case 7:
 YY_RULE_SETUP
-#line 127 "dtc-lexer.l"
+#line 128 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yylval.literal = strdup(yytext);
 			DPRINT("Literal: '%s'\n", yylval.literal);
 			return DT_LEGACYLITERAL;
 		}
 	YY_BREAK
-case 9:
+case 8:
 YY_RULE_SETUP
-#line 135 "dtc-lexer.l"
+#line 136 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yylval.literal = strdup(yytext);
 			DPRINT("Literal: '%s'\n", yylval.literal);
 			return DT_LITERAL;
 		}
 	YY_BREAK
-case 10:
+case 9:
 YY_RULE_SETUP
-#line 143 "dtc-lexer.l"
+#line 144 "dtc-lexer.l"
 {	/* label reference */
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Ref: %s\n", yytext+1);
 			yylval.labelref = strdup(yytext+1);
 			return DT_REF;
 		}
 	YY_BREAK
-case 11:
+case 10:
 YY_RULE_SETUP
-#line 151 "dtc-lexer.l"
+#line 152 "dtc-lexer.l"
 {	/* new-style path reference */
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yytext[yyleng-1] = '\0';
 			DPRINT("Ref: %s\n", yytext+2);
@@ -1014,44 +1018,44 @@ YY_RULE_SETUP
 			return DT_REF;
 		}
 	YY_BREAK
-case 12:
+case 11:
 YY_RULE_SETUP
-#line 160 "dtc-lexer.l"
+#line 161 "dtc-lexer.l"
 {	/* old-style path reference */
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Ref: %s\n", yytext+1);
 			yylval.labelref = strdup(yytext+1);
 			return DT_REF;
 		}
 	YY_BREAK
-case 13:
+case 12:
 YY_RULE_SETUP
-#line 168 "dtc-lexer.l"
+#line 169 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yylval.byte = strtol(yytext, NULL, 16);
 			DPRINT("Byte: %02x\n", (int)yylval.byte);
 			return DT_BYTE;
 		}
 	YY_BREAK
-case 14:
+case 13:
 YY_RULE_SETUP
-#line 176 "dtc-lexer.l"
+#line 177 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("/BYTESTRING\n");
 			BEGIN_DEFAULT();
 			return ']';
 		}
 	YY_BREAK
-case 15:
+case 14:
 YY_RULE_SETUP
-#line 184 "dtc-lexer.l"
+#line 185 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("PropNodeName: %s\n", yytext);
 			yylval.propnodename = strdup(yytext);
@@ -1059,34 +1063,39 @@ YY_RULE_SETUP
 			return DT_PROPNODENAME;
 		}
 	YY_BREAK
+case 15:
+YY_RULE_SETUP
+#line 194 "dtc-lexer.l"
+{
+			yylloc.file = srcpos_file;
+			yylloc.first_line = yylineno;
+			DPRINT("Binary Include\n");
+			return DT_INCBIN;
+		}
+	YY_BREAK
 case 16:
 /* rule 16 can match eol */
 YY_RULE_SETUP
-#line 194 "dtc-lexer.l"
+#line 201 "dtc-lexer.l"
 /* eat whitespace */
 	YY_BREAK
 case 17:
 /* rule 17 can match eol */
 YY_RULE_SETUP
-#line 196 "dtc-lexer.l"
-{
-			yylloc.filenum = srcpos_filenum;
-			yylloc.first_line = yylineno;
-			DPRINT("Comment: %s\n", yytext);
-			/* eat comments */
-		}
+#line 202 "dtc-lexer.l"
+/* eat C-style comments */
 	YY_BREAK
 case 18:
 /* rule 18 can match eol */
 YY_RULE_SETUP
 #line 203 "dtc-lexer.l"
-/* eat line comments */
+/* eat C++-style comments */
 	YY_BREAK
 case 19:
 YY_RULE_SETUP
 #line 205 "dtc-lexer.l"
 {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Char: %c (\\x%02x)\n", yytext[0],
 				(unsigned)yytext[0]);
@@ -1107,7 +1116,7 @@ YY_RULE_SETUP
 #line 222 "dtc-lexer.l"
 ECHO;
 	YY_BREAK
-#line 1111 "dtc-lexer.lex.c"
+#line 1120 "dtc-lexer.lex.c"
 
 	case YY_END_OF_BUFFER:
 		{
@@ -1360,6 +1369,14 @@ static int yy_get_next_buffer (void)
 	else
 		ret_val = EOB_ACT_CONTINUE_SCAN;
 
+	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+		/* Extend the array by 50%, plus the number we really need. */
+		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
+		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+	}
+
 	(yy_n_chars) += number_to_move;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
@@ -1389,7 +1406,7 @@ static int yy_get_next_buffer (void)
 		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
 			{
 			yy_current_state = (int) yy_def[yy_current_state];
-			if ( yy_current_state >= 94 )
+			if ( yy_current_state >= 104 )
 				yy_c = yy_meta[(unsigned int) yy_c];
 			}
 		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
@@ -1417,11 +1434,11 @@ static int yy_get_next_buffer (void)
 	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
 		{
 		yy_current_state = (int) yy_def[yy_current_state];
-		if ( yy_current_state >= 94 )
+		if ( yy_current_state >= 104 )
 			yy_c = yy_meta[(unsigned int) yy_c];
 		}
 	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-	yy_is_jam = (yy_current_state == 93);
+	yy_is_jam = (yy_current_state == 103);
 
 	return yy_is_jam ? 0 : yy_current_state;
 }
@@ -1743,7 +1760,9 @@ static void yyensure_buffer_stack (void)
 		(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
 								(num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
-		
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+								  
 		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
 				
 		(yy_buffer_stack_max) = num_to_alloc;
@@ -1761,6 +1780,8 @@ static void yyensure_buffer_stack (void)
 								((yy_buffer_stack),
 								num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
 
 		/* zero only the new slots.*/
 		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
@@ -2072,14 +2093,13 @@ void yyfree (void * ptr )
  */
 
 struct incl_file {
-	int filenum;
-	FILE *file;
+	struct dtc_file *file;
 	YY_BUFFER_STATE yy_prev_buf;
 	int yy_prev_lineno;
 	struct incl_file *prev;
 };
 
-struct incl_file *incl_file_stack;
+static struct incl_file *incl_file_stack;
 
 
 /*
@@ -2090,36 +2110,34 @@ struct incl_file *incl_file_stack;
 static int incl_depth = 0;
 
 
-int push_input_file(const char *filename)
+static void push_input_file(const char *filename)
 {
-	FILE *f;
 	struct incl_file *incl_file;
+	struct dtc_file *newfile;
+	struct search_path search, *searchptr = NULL;
 
-	if (!filename) {
-		yyerror("No include file name given.");
-		return 0;
-	}
+	assert(filename);
 
-	if (incl_depth++ >= MAX_INCLUDE_DEPTH) {
-		yyerror("Includes nested too deeply");
-		return 0;
+	if (incl_depth++ >= MAX_INCLUDE_DEPTH)
+		die("Includes nested too deeply");
+
+	if (srcpos_file) {
+		search.dir = srcpos_file->dir;
+		search.next = NULL;
+		search.prev = NULL;
+		searchptr = &search;
 	}
 
-	f = dtc_open_file(filename);
+	newfile = dtc_open_file(filename, searchptr);
 
-	incl_file = malloc(sizeof(struct incl_file));
-	if (!incl_file) {
-		yyerror("Can not allocate include file space.");
-		return 0;
-	}
+	incl_file = xmalloc(sizeof(struct incl_file));
 
 	/*
 	 * Save current context.
 	 */
 	incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
 	incl_file->yy_prev_lineno = yylineno;
-	incl_file->filenum = srcpos_filenum;
-	incl_file->file = yyin;
+	incl_file->file = srcpos_file;
 	incl_file->prev = incl_file_stack;
 
 	incl_file_stack = incl_file;
@@ -2127,23 +2145,21 @@ int push_input_file(const char *filename)
 	/*
 	 * Establish new context.
 	 */
-	srcpos_filenum = lookup_file_name(filename, 0);
+	srcpos_file = newfile;
 	yylineno = 1;
-	yyin = f;
+	yyin = newfile->file;
 	yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE));
-
-	return 1;
 }
 
 
-int pop_input_file(void)
+static int pop_input_file(void)
 {
 	struct incl_file *incl_file;
 
 	if (incl_file_stack == 0)
 		return 0;
 
-	fclose(yyin);
+	dtc_close_file(srcpos_file);
 
 	/*
 	 * Pop.
@@ -2158,17 +2174,14 @@ int pop_input_file(void)
 	yy_delete_buffer(YY_CURRENT_BUFFER);
 	yy_switch_to_buffer(incl_file->yy_prev_buf);
 	yylineno = incl_file->yy_prev_lineno;
-	srcpos_filenum = incl_file->filenum;
-	yyin = incl_file->file;
+	srcpos_file = incl_file->file;
+	yyin = incl_file->file ? incl_file->file->file : NULL;
 
 	/*
 	 * Free old state.
 	 */
 	free(incl_file);
 
-	if (YY_CURRENT_BUFFER == 0)
-		return 0;
-
 	return 1;
 }
 
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
index 28e6ec0..2712937 100644
--- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
+++ b/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
@@ -75,7 +75,8 @@
      DT_BYTE = 264,
      DT_STRING = 265,
      DT_LABEL = 266,
-     DT_REF = 267
+     DT_REF = 267,
+     DT_INCBIN = 268
    };
 #endif
 /* Tokens.  */
@@ -89,6 +90,7 @@
 #define DT_STRING 265
 #define DT_LABEL 266
 #define DT_REF 267
+#define DT_INCBIN 268
 
 
 
@@ -96,14 +98,17 @@
 /* Copy the first part of user declarations.  */
 #line 23 "dtc-parser.y"
 
+#include <stdio.h>
+
 #include "dtc.h"
 #include "srcpos.h"
 
-int yylex(void);
-unsigned long long eval_literal(const char *s, int base, int bits);
+extern int yylex(void);
 
 extern struct boot_info *the_boot_info;
+extern int treesource_error;
 
+static unsigned long long eval_literal(const char *s, int base, int bits);
 
 
 /* Enabling traces.  */
@@ -126,16 +131,16 @@ extern struct boot_info *the_boot_info;
 
 #if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
 typedef union YYSTYPE
-#line 34 "dtc-parser.y"
+#line 37 "dtc-parser.y"
 {
 	char *propnodename;
 	char *literal;
 	char *labelref;
 	unsigned int cbase;
-	u8 byte;
+	uint8_t byte;
 	struct data data;
 
-	u64 addr;
+	uint64_t addr;
 	cell_t cell;
 	struct property *prop;
 	struct property *proplist;
@@ -144,7 +149,7 @@ typedef union YYSTYPE
 	struct reserve_info *re;
 }
 /* Line 187 of yacc.c.  */
-#line 148 "dtc-parser.tab.c"
+#line 153 "dtc-parser.tab.c"
 	YYSTYPE;
 # define yystype YYSTYPE /* obsolescent; will be withdrawn */
 # define YYSTYPE_IS_DECLARED 1
@@ -169,7 +174,7 @@ typedef struct YYLTYPE
 
 
 /* Line 216 of yacc.c.  */
-#line 173 "dtc-parser.tab.c"
+#line 178 "dtc-parser.tab.c"
 
 #ifdef short
 # undef short
@@ -386,20 +391,20 @@ union yyalloc
 /* YYFINAL -- State number of the termination state.  */
 #define YYFINAL  9
 /* YYLAST -- Last index in YYTABLE.  */
-#define YYLAST   60
+#define YYLAST   73
 
 /* YYNTOKENS -- Number of terminals.  */
-#define YYNTOKENS  24
+#define YYNTOKENS  27
 /* YYNNTS -- Number of nonterminals.  */
 #define YYNNTS  20
 /* YYNRULES -- Number of rules.  */
-#define YYNRULES  43
+#define YYNRULES  45
 /* YYNRULES -- Number of states.  */
-#define YYNSTATES  67
+#define YYNSTATES  76
 
 /* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX.  */
 #define YYUNDEFTOK  2
-#define YYMAXUTOK   267
+#define YYMAXUTOK   268
 
 #define YYTRANSLATE(YYX)						\
   ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
@@ -411,15 +416,15 @@ static const yytype_uint8 yytranslate[] =
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,     2,    23,    14,     2,    15,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,    13,
-      19,    18,    20,     2,     2,     2,     2,     2,     2,     2,
+      24,    26,     2,     2,    25,    15,     2,    16,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,    14,
+      20,    19,    21,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,    21,     2,    22,     2,     2,     2,     2,     2,     2,
+       2,    22,     2,    23,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,    16,     2,    17,     2,     2,     2,     2,
+       2,     2,     2,    17,     2,    18,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
@@ -433,7 +438,7 @@ static const yytype_uint8 yytranslate[] =
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     1,     2,     3,     4,
-       5,     6,     7,     8,     9,    10,    11,    12
+       5,     6,     7,     8,     9,    10,    11,    12,    13
 };
 
 #if YYDEBUG
@@ -443,37 +448,39 @@ static const yytype_uint8 yyprhs[] =
 {
        0,     0,     3,     8,    11,    12,    15,    21,    22,    25,
       27,    34,    36,    38,    41,    47,    48,    51,    57,    61,
-      64,    69,    74,    77,    80,    81,    84,    87,    88,    91,
-      94,    97,    98,   100,   102,   105,   106,   109,   112,   113,
-     116,   119,   123,   124
+      64,    69,    74,    77,    87,    93,    96,    97,   100,   103,
+     104,   107,   110,   113,   114,   116,   118,   121,   122,   125,
+     128,   129,   132,   135,   139,   140
 };
 
 /* YYRHS -- A `-1'-separated list of the rules' RHS.  */
 static const yytype_int8 yyrhs[] =
 {
-      25,     0,    -1,     3,    13,    26,    31,    -1,    28,    31,
-      -1,    -1,    27,    26,    -1,    43,     4,    30,    30,    13,
-      -1,    -1,    29,    28,    -1,    27,    -1,    43,     4,    30,
-      14,    30,    13,    -1,     6,    -1,     7,    -1,    15,    32,
-      -1,    16,    33,    41,    17,    13,    -1,    -1,    33,    34,
-      -1,    43,     5,    18,    35,    13,    -1,    43,     5,    13,
-      -1,    36,    10,    -1,    36,    19,    37,    20,    -1,    36,
-      21,    40,    22,    -1,    36,    12,    -1,    35,    11,    -1,
-      -1,    35,    23,    -1,    36,    11,    -1,    -1,    37,    39,
-      -1,    37,    12,    -1,    37,    11,    -1,    -1,     8,    -1,
-       6,    -1,    38,     7,    -1,    -1,    40,     9,    -1,    40,
-      11,    -1,    -1,    42,    41,    -1,    42,    34,    -1,    43,
-       5,    32,    -1,    -1,    11,    -1
+      28,     0,    -1,     3,    14,    29,    34,    -1,    31,    34,
+      -1,    -1,    30,    29,    -1,    46,     4,    33,    33,    14,
+      -1,    -1,    32,    31,    -1,    30,    -1,    46,     4,    33,
+      15,    33,    14,    -1,     6,    -1,     7,    -1,    16,    35,
+      -1,    17,    36,    44,    18,    14,    -1,    -1,    36,    37,
+      -1,    46,     5,    19,    38,    14,    -1,    46,     5,    14,
+      -1,    39,    10,    -1,    39,    20,    40,    21,    -1,    39,
+      22,    43,    23,    -1,    39,    12,    -1,    39,    13,    24,
+      10,    25,    33,    25,    33,    26,    -1,    39,    13,    24,
+      10,    26,    -1,    38,    11,    -1,    -1,    38,    25,    -1,
+      39,    11,    -1,    -1,    40,    42,    -1,    40,    12,    -1,
+      40,    11,    -1,    -1,     8,    -1,     6,    -1,    41,     7,
+      -1,    -1,    43,     9,    -1,    43,    11,    -1,    -1,    45,
+      44,    -1,    45,    37,    -1,    46,     5,    35,    -1,    -1,
+      11,    -1
 };
 
 /* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
 static const yytype_uint16 yyrline[] =
 {
-       0,    85,    85,    89,    97,   100,   107,   115,   118,   125,
-     129,   136,   140,   147,   154,   162,   165,   172,   176,   183,
-     187,   191,   195,   199,   207,   210,   214,   222,   225,   229,
-     234,   242,   245,   249,   253,   261,   264,   268,   276,   279,
-     283,   291,   299,   302
+       0,    89,    89,    93,   101,   104,   111,   119,   122,   129,
+     133,   140,   144,   151,   158,   166,   169,   176,   180,   187,
+     191,   195,   199,   203,   220,   231,   239,   242,   246,   254,
+     257,   261,   266,   274,   277,   281,   285,   293,   296,   300,
+     308,   311,   315,   323,   331,   334
 };
 #endif
 
@@ -484,12 +491,12 @@ static const char *const yytname[] =
 {
   "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE",
   "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE",
-  "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "';'", "'-'", "'/'", "'{'",
-  "'}'", "'='", "'<'", "'>'", "'['", "']'", "','", "$accept", "sourcefile",
-  "memreserves", "memreserve", "v0_memreserves", "v0_memreserve", "addr",
-  "devicetree", "nodedef", "proplist", "propdef", "propdata",
-  "propdataprefix", "celllist", "cellbase", "cellval", "bytestring",
-  "subnodes", "subnode", "label", 0
+  "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'",
+  "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','",
+  "')'", "$accept", "sourcefile", "memreserves", "memreserve",
+  "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef",
+  "proplist", "propdef", "propdata", "propdataprefix", "celllist",
+  "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0
 };
 #endif
 
@@ -499,19 +506,19 @@ static const char *const yytname[] =
 static const yytype_uint16 yytoknum[] =
 {
        0,   256,   257,   258,   259,   260,   261,   262,   263,   264,
-     265,   266,   267,    59,    45,    47,   123,   125,    61,    60,
-      62,    91,    93,    44
+     265,   266,   267,   268,    59,    45,    47,   123,   125,    61,
+      60,    62,    91,    93,    40,    44,    41
 };
 # endif
 
 /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives.  */
 static const yytype_uint8 yyr1[] =
 {
-       0,    24,    25,    25,    26,    26,    27,    28,    28,    29,
-      29,    30,    30,    31,    32,    33,    33,    34,    34,    35,
-      35,    35,    35,    35,    36,    36,    36,    37,    37,    37,
-      37,    38,    38,    39,    39,    40,    40,    40,    41,    41,
-      41,    42,    43,    43
+       0,    27,    28,    28,    29,    29,    30,    31,    31,    32,
+      32,    33,    33,    34,    35,    36,    36,    37,    37,    38,
+      38,    38,    38,    38,    38,    38,    39,    39,    39,    40,
+      40,    40,    40,    41,    41,    42,    42,    43,    43,    43,
+      44,    44,    44,    45,    46,    46
 };
 
 /* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN.  */
@@ -519,9 +526,9 @@ static const yytype_uint8 yyr2[] =
 {
        0,     2,     4,     2,     0,     2,     5,     0,     2,     1,
        6,     1,     1,     2,     5,     0,     2,     5,     3,     2,
-       4,     4,     2,     2,     0,     2,     2,     0,     2,     2,
-       2,     0,     1,     1,     2,     0,     2,     2,     0,     2,
-       2,     3,     0,     1
+       4,     4,     2,     9,     5,     2,     0,     2,     2,     0,
+       2,     2,     2,     0,     1,     1,     2,     0,     2,     2,
+       0,     2,     2,     3,     0,     1
 };
 
 /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
@@ -529,81 +536,86 @@ static const yytype_uint8 yyr2[] =
    means the default is an error.  */
 static const yytype_uint8 yydefact[] =
 {
-       7,     0,    43,     0,     9,     0,     7,     0,     4,     1,
+       7,     0,    45,     0,     9,     0,     7,     0,     4,     1,
        0,     3,     8,     0,     0,     4,     0,    15,    13,    11,
-      12,     0,     2,     5,     0,    38,     0,     0,     0,    16,
-       0,    38,     0,     0,     6,     0,    40,    39,     0,    10,
-      14,    18,    24,    41,     0,     0,    23,    17,    25,    19,
-      26,    22,    27,    35,    31,     0,    33,    32,    30,    29,
-      20,     0,    28,    36,    37,    21,    34
+      12,     0,     2,     5,     0,    40,     0,     0,     0,    16,
+       0,    40,     0,     0,     6,     0,    42,    41,     0,    10,
+      14,    18,    26,    43,     0,     0,    25,    17,    27,    19,
+      28,    22,     0,    29,    37,     0,    33,     0,     0,    35,
+      34,    32,    31,    20,     0,    30,    38,    39,    21,     0,
+      24,    36,     0,     0,     0,    23
 };
 
 /* YYDEFGOTO[NTERM-NUM].  */
 static const yytype_int8 yydefgoto[] =
 {
       -1,     3,    14,     4,     5,     6,    27,    11,    18,    25,
-      29,    44,    45,    54,    61,    62,    55,    30,    31,     7
+      29,    44,    45,    56,    64,    65,    57,    30,    31,     7
 };
 
 /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
    STATE-NUM.  */
-#define YYPACT_NINF -13
+#define YYPACT_NINF -14
 static const yytype_int8 yypact[] =
 {
-      23,    11,   -13,    37,   -13,    -4,    18,    39,    18,   -13,
-      28,   -13,   -13,    34,    -4,    18,    41,   -13,   -13,   -13,
-     -13,    25,   -13,   -13,    34,    -3,    34,    33,    34,   -13,
-      30,    -3,    43,    36,   -13,    38,   -13,   -13,    20,   -13,
-     -13,   -13,   -13,   -13,     2,     9,   -13,   -13,   -13,   -13,
-     -13,   -13,   -13,   -13,    -2,    -6,   -13,   -13,   -13,   -13,
-     -13,    45,   -13,   -13,   -13,   -13,   -13
+      30,   -11,   -14,     7,   -14,    -1,    27,    13,    27,   -14,
+       8,   -14,   -14,    40,    -1,    27,    35,   -14,   -14,   -14,
+     -14,    21,   -14,   -14,    40,    24,    40,    28,    40,   -14,
+      32,    24,    46,    38,   -14,    39,   -14,   -14,    26,   -14,
+     -14,   -14,   -14,   -14,    -9,    10,   -14,   -14,   -14,   -14,
+     -14,   -14,    31,   -14,   -14,    44,    -2,     3,    23,   -14,
+     -14,   -14,   -14,   -14,    50,   -14,   -14,   -14,   -14,    40,
+     -14,   -14,    33,    40,    36,   -14
 };
 
 /* YYPGOTO[NTERM-NUM].  */
 static const yytype_int8 yypgoto[] =
 {
-     -13,   -13,    35,    27,    47,   -13,   -12,    40,    17,   -13,
-      26,   -13,   -13,   -13,   -13,   -13,   -13,    29,   -13,    -8
+     -14,   -14,    48,    29,    53,   -14,   -13,    47,    34,   -14,
+      37,   -14,   -14,   -14,   -14,   -14,   -14,    42,   -14,    -7
 };
 
 /* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
    positive, shift that token.  If negative, reduce the rule which
    number is the opposite.  If zero, do what YYDEFACT says.
    If YYTABLE_NINF, syntax error.  */
-#define YYTABLE_NINF -43
+#define YYTABLE_NINF -45
 static const yytype_int8 yytable[] =
 {
-      16,    21,   -42,    63,    56,    64,    57,    16,     2,    58,
-      59,    10,    28,    46,    33,    47,    65,    32,    60,    49,
-      50,    51,   -42,    32,     8,    48,     1,   -42,    52,     2,
-      53,    19,    20,    41,     2,    15,    17,     9,    42,    26,
-      19,    20,    15,    13,    17,    24,    34,    35,    38,    39,
-      23,    40,    66,    12,    22,    43,     0,    36,     0,     0,
-      37
+      21,    16,    46,     8,    59,    47,    60,     9,    16,    61,
+      62,    28,    66,    33,    67,    10,    48,    13,    32,    63,
+      49,    50,    51,    52,    32,    17,    68,    19,    20,   -44,
+      53,   -44,    54,     1,   -44,     2,    26,    15,     2,    24,
+      41,     2,    34,    17,    15,    42,    19,    20,    69,    70,
+      35,    38,    39,    40,    58,    55,    72,    71,    73,    12,
+      74,    22,    75,    23,     0,     0,     0,     0,    36,     0,
+       0,     0,    43,    37
 };
 
 static const yytype_int8 yycheck[] =
 {
-       8,    13,     5,     9,     6,    11,     8,    15,    11,    11,
-      12,    15,    24,    11,    26,    13,    22,    25,    20,    10,
-      11,    12,     4,    31,    13,    23,     3,     4,    19,    11,
-      21,     6,     7,    13,    11,     8,    16,     0,    18,    14,
-       6,     7,    15,     4,    16,     4,    13,    17,     5,    13,
-      15,    13,     7,     6,    14,    38,    -1,    31,    -1,    -1,
-      31
+      13,     8,    11,    14,     6,    14,     8,     0,    15,    11,
+      12,    24,     9,    26,    11,    16,    25,     4,    25,    21,
+      10,    11,    12,    13,    31,    17,    23,     6,     7,     5,
+      20,     4,    22,     3,     4,    11,    15,     8,    11,     4,
+      14,    11,    14,    17,    15,    19,     6,     7,    25,    26,
+      18,     5,    14,    14,    10,    24,    69,     7,    25,     6,
+      73,    14,    26,    15,    -1,    -1,    -1,    -1,    31,    -1,
+      -1,    -1,    38,    31
 };
 
 /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
    symbol of state STATE-NUM.  */
 static const yytype_uint8 yystos[] =
 {
-       0,     3,    11,    25,    27,    28,    29,    43,    13,     0,
-      15,    31,    28,     4,    26,    27,    43,    16,    32,     6,
-       7,    30,    31,    26,     4,    33,    14,    30,    30,    34,
-      41,    42,    43,    30,    13,    17,    34,    41,     5,    13,
-      13,    13,    18,    32,    35,    36,    11,    13,    23,    10,
-      11,    12,    19,    21,    37,    40,     6,     8,    11,    12,
-      20,    38,    39,     9,    11,    22,     7
+       0,     3,    11,    28,    30,    31,    32,    46,    14,     0,
+      16,    34,    31,     4,    29,    30,    46,    17,    35,     6,
+       7,    33,    34,    29,     4,    36,    15,    33,    33,    37,
+      44,    45,    46,    33,    14,    18,    37,    44,     5,    14,
+      14,    14,    19,    35,    38,    39,    11,    14,    25,    10,
+      11,    12,    13,    20,    22,    24,    40,    43,    10,     6,
+       8,    11,    12,    21,    41,    42,     9,    11,    23,    25,
+      26,     7,    33,    25,    33,    26
 };
 
 #define yyerrok		(yyerrstatus = 0)
@@ -1440,289 +1452,323 @@ yyreduce:
   switch (yyn)
     {
         case 2:
-#line 86 "dtc-parser.y"
+#line 90 "dtc-parser.y"
     {
-			the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node));
+			the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0);
 		;}
     break;
 
   case 3:
-#line 90 "dtc-parser.y"
+#line 94 "dtc-parser.y"
     {
-			the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node));
+			the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0);
 		;}
     break;
 
   case 4:
-#line 97 "dtc-parser.y"
+#line 101 "dtc-parser.y"
     {
 			(yyval.re) = NULL;
 		;}
     break;
 
   case 5:
-#line 101 "dtc-parser.y"
+#line 105 "dtc-parser.y"
     {
 			(yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
 		;}
     break;
 
   case 6:
-#line 108 "dtc-parser.y"
+#line 112 "dtc-parser.y"
     {
 			(yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref));
 		;}
     break;
 
   case 7:
-#line 115 "dtc-parser.y"
+#line 119 "dtc-parser.y"
     {
 			(yyval.re) = NULL;
 		;}
     break;
 
   case 8:
-#line 119 "dtc-parser.y"
+#line 123 "dtc-parser.y"
     {
 			(yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
 		;}
     break;
 
   case 9:
-#line 126 "dtc-parser.y"
+#line 130 "dtc-parser.y"
     {
 			(yyval.re) = (yyvsp[(1) - (1)].re);
 		;}
     break;
 
   case 10:
-#line 130 "dtc-parser.y"
+#line 134 "dtc-parser.y"
     {
 			(yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref));
 		;}
     break;
 
   case 11:
-#line 137 "dtc-parser.y"
+#line 141 "dtc-parser.y"
     {
 			(yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64);
 		;}
     break;
 
   case 12:
-#line 141 "dtc-parser.y"
+#line 145 "dtc-parser.y"
     {
 			(yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64);
 		;}
     break;
 
   case 13:
-#line 148 "dtc-parser.y"
+#line 152 "dtc-parser.y"
     {
 			(yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL);
 		;}
     break;
 
   case 14:
-#line 155 "dtc-parser.y"
+#line 159 "dtc-parser.y"
     {
 			(yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist));
 		;}
     break;
 
   case 15:
-#line 162 "dtc-parser.y"
+#line 166 "dtc-parser.y"
     {
 			(yyval.proplist) = NULL;
 		;}
     break;
 
   case 16:
-#line 166 "dtc-parser.y"
+#line 170 "dtc-parser.y"
     {
 			(yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist));
 		;}
     break;
 
   case 17:
-#line 173 "dtc-parser.y"
+#line 177 "dtc-parser.y"
     {
 			(yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref));
 		;}
     break;
 
   case 18:
-#line 177 "dtc-parser.y"
+#line 181 "dtc-parser.y"
     {
 			(yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref));
 		;}
     break;
 
   case 19:
-#line 184 "dtc-parser.y"
+#line 188 "dtc-parser.y"
     {
 			(yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data));
 		;}
     break;
 
   case 20:
-#line 188 "dtc-parser.y"
+#line 192 "dtc-parser.y"
     {
 			(yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
 		;}
     break;
 
   case 21:
-#line 192 "dtc-parser.y"
+#line 196 "dtc-parser.y"
     {
 			(yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
 		;}
     break;
 
   case 22:
-#line 196 "dtc-parser.y"
+#line 200 "dtc-parser.y"
     {
 			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref));
 		;}
     break;
 
   case 23:
-#line 200 "dtc-parser.y"
+#line 204 "dtc-parser.y"
     {
-			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+			struct search_path path = { srcpos_file->dir, NULL, NULL };
+			struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path);
+			struct data d = empty_data;
+
+			if ((yyvsp[(6) - (9)].addr) != 0)
+				if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0)
+					yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
+						 (unsigned long long)(yyvsp[(6) - (9)].addr),
+						 (yyvsp[(4) - (9)].data).val, strerror(errno));
+
+			d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr));
+
+			(yyval.data) = data_merge((yyvsp[(1) - (9)].data), d);
+			dtc_close_file(file);
 		;}
     break;
 
   case 24:
-#line 207 "dtc-parser.y"
+#line 221 "dtc-parser.y"
     {
-			(yyval.data) = empty_data;
+			struct search_path path = { srcpos_file->dir, NULL, NULL };
+			struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path);
+			struct data d = empty_data;
+
+			d = data_copy_file(file->file, -1);
+
+			(yyval.data) = data_merge((yyvsp[(1) - (5)].data), d);
+			dtc_close_file(file);
 		;}
     break;
 
   case 25:
-#line 211 "dtc-parser.y"
+#line 232 "dtc-parser.y"
     {
-			(yyval.data) = (yyvsp[(1) - (2)].data);
+			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
 		;}
     break;
 
   case 26:
-#line 215 "dtc-parser.y"
+#line 239 "dtc-parser.y"
     {
-			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+			(yyval.data) = empty_data;
 		;}
     break;
 
   case 27:
-#line 222 "dtc-parser.y"
+#line 243 "dtc-parser.y"
     {
-			(yyval.data) = empty_data;
+			(yyval.data) = (yyvsp[(1) - (2)].data);
 		;}
     break;
 
   case 28:
-#line 226 "dtc-parser.y"
+#line 247 "dtc-parser.y"
     {
-			(yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell));
+			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
 		;}
     break;
 
   case 29:
-#line 230 "dtc-parser.y"
+#line 254 "dtc-parser.y"
+    {
+			(yyval.data) = empty_data;
+		;}
+    break;
+
+  case 30:
+#line 258 "dtc-parser.y"
+    {
+			(yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell));
+		;}
+    break;
+
+  case 31:
+#line 262 "dtc-parser.y"
     {
 			(yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE,
 							      (yyvsp[(2) - (2)].labelref)), -1);
 		;}
     break;
 
-  case 30:
-#line 235 "dtc-parser.y"
+  case 32:
+#line 267 "dtc-parser.y"
     {
 			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
 		;}
     break;
 
-  case 31:
-#line 242 "dtc-parser.y"
+  case 33:
+#line 274 "dtc-parser.y"
     {
 			(yyval.cbase) = 16;
 		;}
     break;
 
-  case 33:
-#line 250 "dtc-parser.y"
+  case 35:
+#line 282 "dtc-parser.y"
     {
 			(yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32);
 		;}
     break;
 
-  case 34:
-#line 254 "dtc-parser.y"
+  case 36:
+#line 286 "dtc-parser.y"
     {
 			(yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32);
 		;}
     break;
 
-  case 35:
-#line 261 "dtc-parser.y"
+  case 37:
+#line 293 "dtc-parser.y"
     {
 			(yyval.data) = empty_data;
 		;}
     break;
 
-  case 36:
-#line 265 "dtc-parser.y"
+  case 38:
+#line 297 "dtc-parser.y"
     {
 			(yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte));
 		;}
     break;
 
-  case 37:
-#line 269 "dtc-parser.y"
+  case 39:
+#line 301 "dtc-parser.y"
     {
 			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
 		;}
     break;
 
-  case 38:
-#line 276 "dtc-parser.y"
+  case 40:
+#line 308 "dtc-parser.y"
     {
 			(yyval.nodelist) = NULL;
 		;}
     break;
 
-  case 39:
-#line 280 "dtc-parser.y"
+  case 41:
+#line 312 "dtc-parser.y"
     {
 			(yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist));
 		;}
     break;
 
-  case 40:
-#line 284 "dtc-parser.y"
+  case 42:
+#line 316 "dtc-parser.y"
     {
-			yyerror("syntax error: properties must precede subnodes\n");
+			yyerror("syntax error: properties must precede subnodes");
 			YYERROR;
 		;}
     break;
 
-  case 41:
-#line 292 "dtc-parser.y"
+  case 43:
+#line 324 "dtc-parser.y"
     {
 			(yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref));
 		;}
     break;
 
-  case 42:
-#line 299 "dtc-parser.y"
+  case 44:
+#line 331 "dtc-parser.y"
     {
 			(yyval.labelref) = NULL;
 		;}
     break;
 
-  case 43:
-#line 303 "dtc-parser.y"
+  case 45:
+#line 335 "dtc-parser.y"
     {
 			(yyval.labelref) = (yyvsp[(1) - (1)].labelref);
 		;}
@@ -1730,7 +1776,7 @@ yyreduce:
 
 
 /* Line 1267 of yacc.c.  */
-#line 1734 "dtc-parser.tab.c"
+#line 1780 "dtc-parser.tab.c"
       default: break;
     }
   YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
@@ -1950,21 +1996,32 @@ yyreturn:
 }
 
 
-#line 308 "dtc-parser.y"
+#line 340 "dtc-parser.y"
 
 
-void yyerror (char const *s)
+void yyerrorf(char const *s, ...)
 {
-	const char *fname = srcpos_filename_for_num(yylloc.filenum);
+	const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
+	va_list va;
+	va_start(va, s);
 
 	if (strcmp(fname, "-") == 0)
 		fname = "stdin";
 
-	fprintf(stderr, "%s:%d %s\n",
-		fname, yylloc.first_line, s);
+	fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
+	vfprintf(stderr, s, va);
+	fprintf(stderr, "\n");
+
+	treesource_error = 1;
+	va_end(va);
+}
+
+void yyerror (char const *s)
+{
+	yyerrorf("%s", s);
 }
 
-unsigned long long eval_literal(const char *s, int base, int bits)
+static unsigned long long eval_literal(const char *s, int base, int bits)
 {
 	unsigned long long val;
 	char *e;
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
index 4707b02..ba99100 100644
--- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
+++ b/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
@@ -48,7 +48,8 @@
      DT_BYTE = 264,
      DT_STRING = 265,
      DT_LABEL = 266,
-     DT_REF = 267
+     DT_REF = 267,
+     DT_INCBIN = 268
    };
 #endif
 /* Tokens.  */
@@ -62,22 +63,23 @@
 #define DT_STRING 265
 #define DT_LABEL 266
 #define DT_REF 267
+#define DT_INCBIN 268
 
 
 
 
 #if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
 typedef union YYSTYPE
-#line 34 "dtc-parser.y"
+#line 37 "dtc-parser.y"
 {
 	char *propnodename;
 	char *literal;
 	char *labelref;
 	unsigned int cbase;
-	u8 byte;
+	uint8_t byte;
 	struct data data;
 
-	u64 addr;
+	uint64_t addr;
 	cell_t cell;
 	struct property *prop;
 	struct property *proplist;
@@ -86,7 +88,7 @@ typedef union YYSTYPE
 	struct reserve_info *re;
 }
 /* Line 1489 of yacc.c.  */
-#line 90 "dtc-parser.tab.h"
+#line 92 "dtc-parser.tab.h"
 	YYSTYPE;
 # define yystype YYSTYPE /* obsolescent; will be withdrawn */
 # define YYSTYPE_IS_DECLARED 1
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.y b/arch/powerpc/boot/dtc-src/dtc-parser.y
index 002ea7f..b2ab562 100644
--- a/arch/powerpc/boot/dtc-src/dtc-parser.y
+++ b/arch/powerpc/boot/dtc-src/dtc-parser.y
@@ -21,14 +21,17 @@
 %locations
 
 %{
+#include <stdio.h>
+
 #include "dtc.h"
 #include "srcpos.h"
 
-int yylex(void);
-unsigned long long eval_literal(const char *s, int base, int bits);
+extern int yylex(void);
 
 extern struct boot_info *the_boot_info;
+extern int treesource_error;
 
+static unsigned long long eval_literal(const char *s, int base, int bits);
 %}
 
 %union {
@@ -36,10 +39,10 @@ extern struct boot_info *the_boot_info;
 	char *literal;
 	char *labelref;
 	unsigned int cbase;
-	u8 byte;
+	uint8_t byte;
 	struct data data;
 
-	u64 addr;
+	uint64_t addr;
 	cell_t cell;
 	struct property *prop;
 	struct property *proplist;
@@ -58,6 +61,7 @@ extern struct boot_info *the_boot_info;
 %token <data> DT_STRING
 %token <labelref> DT_LABEL
 %token <labelref> DT_REF
+%token DT_INCBIN
 
 %type <data> propdata
 %type <data> propdataprefix
@@ -84,11 +88,11 @@ extern struct boot_info *the_boot_info;
 sourcefile:
 	  DT_V1 ';' memreserves devicetree
 		{
-			the_boot_info = build_boot_info($3, $4);
+			the_boot_info = build_boot_info($3, $4, 0);
 		}
 	| v0_memreserves devicetree
 		{
-			the_boot_info = build_boot_info($1, $2);
+			the_boot_info = build_boot_info($1, $2, 0);
 		}
 	;
 
@@ -196,6 +200,34 @@ propdata:
 		{
 			$$ = data_add_marker($1, REF_PATH, $2);
 		}
+	| propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')'
+		{
+			struct search_path path = { srcpos_file->dir, NULL, NULL };
+			struct dtc_file *file = dtc_open_file($4.val, &path);
+			struct data d = empty_data;
+
+			if ($6 != 0)
+				if (fseek(file->file, $6, SEEK_SET) != 0)
+					yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
+						 (unsigned long long)$6,
+						 $4.val, strerror(errno));
+
+			d = data_copy_file(file->file, $8);
+
+			$$ = data_merge($1, d);
+			dtc_close_file(file);
+		}
+	| propdataprefix DT_INCBIN '(' DT_STRING ')'
+		{
+			struct search_path path = { srcpos_file->dir, NULL, NULL };
+			struct dtc_file *file = dtc_open_file($4.val, &path);
+			struct data d = empty_data;
+
+			d = data_copy_file(file->file, -1);
+
+			$$ = data_merge($1, d);
+			dtc_close_file(file);
+		}
 	| propdata DT_LABEL
 		{
 			$$ = data_add_marker($1, LABEL, $2);
@@ -282,7 +314,7 @@ subnodes:
 		}
 	| subnode propdef
 		{
-			yyerror("syntax error: properties must precede subnodes\n");
+			yyerror("syntax error: properties must precede subnodes");
 			YYERROR;
 		}
 	;
@@ -307,18 +339,29 @@ label:
 
 %%
 
-void yyerror (char const *s)
+void yyerrorf(char const *s, ...)
 {
-	const char *fname = srcpos_filename_for_num(yylloc.filenum);
+	const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
+	va_list va;
+	va_start(va, s);
 
 	if (strcmp(fname, "-") == 0)
 		fname = "stdin";
 
-	fprintf(stderr, "%s:%d %s\n",
-		fname, yylloc.first_line, s);
+	fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
+	vfprintf(stderr, s, va);
+	fprintf(stderr, "\n");
+
+	treesource_error = 1;
+	va_end(va);
+}
+
+void yyerror (char const *s)
+{
+	yyerrorf("%s", s);
 }
 
-unsigned long long eval_literal(const char *s, int base, int bits)
+static unsigned long long eval_literal(const char *s, int base, int bits)
 {
 	unsigned long long val;
 	char *e;
diff --git a/arch/powerpc/boot/dtc-src/dtc.c b/arch/powerpc/boot/dtc-src/dtc.c
index 01131d7..d8fd43b 100644
--- a/arch/powerpc/boot/dtc-src/dtc.c
+++ b/arch/powerpc/boot/dtc-src/dtc.c
@@ -55,7 +55,7 @@ char *join_path(const char *path, const char *name)
 	return str;
 }
 
-void fill_fullpaths(struct node *tree, const char *prefix)
+static void fill_fullpaths(struct node *tree, const char *prefix)
 {
 	struct node *child;
 	const char *unit;
@@ -106,7 +106,7 @@ static void  __attribute__ ((noreturn)) usage(void)
 	fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n");
 	fprintf(stderr, "\t-v\n");
 	fprintf(stderr, "\t\tPrint DTC version and exit\n");
-	exit(2);
+	exit(3);
 }
 
 int main(int argc, char *argv[])
@@ -118,10 +118,9 @@ int main(int argc, char *argv[])
 	int force = 0, check = 0;
 	const char *arg;
 	int opt;
-	FILE *inf = NULL;
 	FILE *outf = NULL;
 	int outversion = DEFAULT_FDT_VERSION;
-	int boot_cpuid_phys = 0xfeedbeef;
+	long long cmdline_boot_cpuid = -1;
 
 	quiet      = 0;
 	reservenum = 0;
@@ -161,11 +160,11 @@ int main(int argc, char *argv[])
 			quiet++;
 			break;
 		case 'b':
-			boot_cpuid_phys = strtol(optarg, NULL, 0);
+			cmdline_boot_cpuid = strtoll(optarg, NULL, 0);
 			break;
 		case 'v':
-		    printf("Version: %s\n", DTC_VERSION);
-		    exit(0);
+			printf("Version: %s\n", DTC_VERSION);
+			exit(0);
 		case 'h':
 		default:
 			usage();
@@ -180,31 +179,27 @@ int main(int argc, char *argv[])
 		arg = argv[optind];
 
 	/* minsize and padsize are mutually exclusive */
-	if ((minsize) && (padsize)) {
+	if (minsize && padsize)
 		die("Can't set both -p and -S\n");
-	}
 
 	fprintf(stderr, "DTC: %s->%s  on file \"%s\"\n",
 		inform, outform, arg);
 
-	if (streq(inform, "dts")) {
+	if (streq(inform, "dts"))
 		bi = dt_from_source(arg);
-	} else if (streq(inform, "fs")) {
+	else if (streq(inform, "fs"))
 		bi = dt_from_fs(arg);
-	} else if(streq(inform, "dtb")) {
-		inf = dtc_open_file(arg);
-		bi = dt_from_blob(inf);
-	} else {
+	else if(streq(inform, "dtb"))
+		bi = dt_from_blob(arg);
+	else
 		die("Unknown input format \"%s\"\n", inform);
-	}
 
-	if (inf && (inf != stdin))
-		fclose(inf);
+	if (cmdline_boot_cpuid != -1)
+		bi->boot_cpuid_phys = cmdline_boot_cpuid;
 
-	if (! bi || ! bi->dt)
-		die("Couldn't read input tree\n");
+	fill_fullpaths(bi->dt, "");
+	process_checks(force, bi);
 
-	process_checks(force, bi, check, outversion, boot_cpuid_phys);
 
 	if (streq(outname, "-")) {
 		outf = stdout;
@@ -218,9 +213,9 @@ int main(int argc, char *argv[])
 	if (streq(outform, "dts")) {
 		dt_to_source(outf, bi);
 	} else if (streq(outform, "dtb")) {
-		dt_to_blob(outf, bi, outversion, boot_cpuid_phys);
+		dt_to_blob(outf, bi, outversion);
 	} else if (streq(outform, "asm")) {
-		dt_to_asm(outf, bi, outversion, boot_cpuid_phys);
+		dt_to_asm(outf, bi, outversion);
 	} else if (streq(outform, "null")) {
 		/* do nothing */
 	} else {
diff --git a/arch/powerpc/boot/dtc-src/dtc.h b/arch/powerpc/boot/dtc-src/dtc.h
index 6528177..08d54c8 100644
--- a/arch/powerpc/boot/dtc-src/dtc.h
+++ b/arch/powerpc/boot/dtc-src/dtc.h
@@ -30,10 +30,8 @@
 #include <ctype.h>
 #include <errno.h>
 #include <unistd.h>
-#include <netinet/in.h>
-#include <endian.h>
-#include <byteswap.h>
 
+#include <libfdt_env.h>
 #include <fdt.h>
 
 #define DEFAULT_FDT_VERSION	17
@@ -75,25 +73,8 @@ static inline void *xrealloc(void *p, size_t len)
 	return new;
 }
 
-typedef uint8_t u8;
-typedef uint16_t u16;
-typedef uint32_t u32;
-typedef uint64_t u64;
-typedef u32 cell_t;
+typedef uint32_t cell_t;
 
-#define cpu_to_be16(x)	htons(x)
-#define be16_to_cpu(x)	ntohs(x)
-
-#define cpu_to_be32(x)	htonl(x)
-#define be32_to_cpu(x)	ntohl(x)
-
-#if __BYTE_ORDER == __BIG_ENDIAN
-#define cpu_to_be64(x)	(x)
-#define be64_to_cpu(x)	(x)
-#else
-#define cpu_to_be64(x)	bswap_64(x)
-#define be64_to_cpu(x)	bswap_64(x)
-#endif
 
 #define streq(a, b)	(strcmp((a), (b)) == 0)
 #define strneq(a, b, n)	(strncmp((a), (b), (n)) == 0)
@@ -118,7 +99,6 @@ struct  marker {
 struct data {
 	int len;
 	char *val;
-	int asize;
 	struct marker *markers;
 };
 
@@ -145,7 +125,7 @@ struct data data_insert_at_marker(struct data d, struct marker *m,
 struct data data_merge(struct data d1, struct data d2);
 struct data data_append_cell(struct data d, cell_t word);
 struct data data_append_re(struct data d, const struct fdt_reserve_entry *re);
-struct data data_append_addr(struct data d, u64 addr);
+struct data data_append_addr(struct data d, uint64_t addr);
 struct data data_append_byte(struct data d, uint8_t byte);
 struct data data_append_zeroes(struct data d, int len);
 struct data data_append_align(struct data d, int align);
@@ -223,7 +203,7 @@ struct reserve_info {
 	char *label;
 };
 
-struct reserve_info *build_reserve_entry(u64 start, u64 len, char *label);
+struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label);
 struct reserve_info *chain_reserve_entry(struct reserve_info *first,
 					 struct reserve_info *list);
 struct reserve_info *add_reserve_entry(struct reserve_info *list,
@@ -233,24 +213,22 @@ struct reserve_info *add_reserve_entry(struct reserve_info *list,
 struct boot_info {
 	struct reserve_info *reservelist;
 	struct node *dt;		/* the device tree */
+	uint32_t boot_cpuid_phys;
 };
 
 struct boot_info *build_boot_info(struct reserve_info *reservelist,
-				  struct node *tree);
+				  struct node *tree, uint32_t boot_cpuid_phys);
 
 /* Checks */
 
-void process_checks(int force, struct boot_info *bi,
-		    int checkflag, int outversion, int boot_cpuid_phys);
+void process_checks(int force, struct boot_info *bi);
 
 /* Flattened trees */
 
-void dt_to_blob(FILE *f, struct boot_info *bi, int version,
-		int boot_cpuid_phys);
-void dt_to_asm(FILE *f, struct boot_info *bi, int version,
-	       int boot_cpuid_phys);
+void dt_to_blob(FILE *f, struct boot_info *bi, int version);
+void dt_to_asm(FILE *f, struct boot_info *bi, int version);
 
-struct boot_info *dt_from_blob(FILE *f);
+struct boot_info *dt_from_blob(const char *fname);
 
 /* Tree source */
 
@@ -264,6 +242,5 @@ struct boot_info *dt_from_fs(const char *dirname);
 /* misc */
 
 char *join_path(const char *path, const char *name);
-void fill_fullpaths(struct node *tree, const char *prefix);
 
 #endif /* _DTC_H */
diff --git a/arch/powerpc/boot/dtc-src/flattree.c b/arch/powerpc/boot/dtc-src/flattree.c
index a7cfb84..76acd28 100644
--- a/arch/powerpc/boot/dtc-src/flattree.c
+++ b/arch/powerpc/boot/dtc-src/flattree.c
@@ -19,6 +19,7 @@
  */
 
 #include "dtc.h"
+#include "srcpos.h"
 
 #define FTF_FULLPATH	0x1
 #define FTF_VARALIGN	0x2
@@ -162,28 +163,18 @@ static void asm_emit_data(void *e, struct data d)
 {
 	FILE *f = e;
 	int off = 0;
-	struct marker *m;
+	struct marker *m = d.markers;
 
-	m = d.markers;
-	while (m) {
-		if (m->type == LABEL)
-			emit_offset_label(f, m->ref, m->offset);
-		m = m->next;
-	}
+	for_each_marker_of_type(m, LABEL)
+		emit_offset_label(f, m->ref, m->offset);
 
-	while ((d.len - off) >= sizeof(u32)) {
+	while ((d.len - off) >= sizeof(uint32_t)) {
 		fprintf(f, "\t.long\t0x%x\n",
-			be32_to_cpu(*((u32 *)(d.val+off))));
-		off += sizeof(u32);
-	}
-
-	if ((d.len - off) >= sizeof(u16)) {
-		fprintf(f, "\t.short\t0x%hx\n",
-			be16_to_cpu(*((u16 *)(d.val+off))));
-		off += sizeof(u16);
+			fdt32_to_cpu(*((uint32_t *)(d.val+off))));
+		off += sizeof(uint32_t);
 	}
 
-	if ((d.len - off) >= 1) {
+	while ((d.len - off) >= 1) {
 		fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]);
 		off += 1;
 	}
@@ -336,29 +327,28 @@ static void make_fdt_header(struct fdt_header *fdt,
 
 	memset(fdt, 0xff, sizeof(*fdt));
 
-	fdt->magic = cpu_to_be32(FDT_MAGIC);
-	fdt->version = cpu_to_be32(vi->version);
-	fdt->last_comp_version = cpu_to_be32(vi->last_comp_version);
+	fdt->magic = cpu_to_fdt32(FDT_MAGIC);
+	fdt->version = cpu_to_fdt32(vi->version);
+	fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version);
 
 	/* Reserve map should be doubleword aligned */
 	reserve_off = ALIGN(vi->hdr_size, 8);
 
-	fdt->off_mem_rsvmap = cpu_to_be32(reserve_off);
-	fdt->off_dt_struct = cpu_to_be32(reserve_off + reservesize);
-	fdt->off_dt_strings = cpu_to_be32(reserve_off + reservesize
+	fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off);
+	fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize);
+	fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize
 					  + dtsize);
-	fdt->totalsize = cpu_to_be32(reserve_off + reservesize + dtsize + strsize);
+	fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize);
 
 	if (vi->flags & FTF_BOOTCPUID)
-		fdt->boot_cpuid_phys = cpu_to_be32(boot_cpuid_phys);
+		fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys);
 	if (vi->flags & FTF_STRTABSIZE)
-		fdt->size_dt_strings = cpu_to_be32(strsize);
+		fdt->size_dt_strings = cpu_to_fdt32(strsize);
 	if (vi->flags & FTF_STRUCTSIZE)
-		fdt->size_dt_struct = cpu_to_be32(dtsize);
+		fdt->size_dt_struct = cpu_to_fdt32(dtsize);
 }
 
-void dt_to_blob(FILE *f, struct boot_info *bi, int version,
-		int boot_cpuid_phys)
+void dt_to_blob(FILE *f, struct boot_info *bi, int version)
 {
 	struct version_info *vi = NULL;
 	int i;
@@ -383,26 +373,26 @@ void dt_to_blob(FILE *f, struct boot_info *bi, int version,
 
 	/* Make header */
 	make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len,
-			boot_cpuid_phys);
+			bi->boot_cpuid_phys);
 
 	/*
 	 * If the user asked for more space than is used, adjust the totalsize.
 	 */
 	if (minsize > 0) {
-		padlen = minsize - be32_to_cpu(fdt.totalsize);
+		padlen = minsize - fdt32_to_cpu(fdt.totalsize);
 		if ((padlen < 0) && (quiet < 1))
 			fprintf(stderr,
 				"Warning: blob size %d >= minimum size %d\n",
-				be32_to_cpu(fdt.totalsize), minsize);
+				fdt32_to_cpu(fdt.totalsize), minsize);
 	}
 
 	if (padsize > 0)
 		padlen = padsize;
 
 	if (padlen > 0) {
-		int tsize = be32_to_cpu(fdt.totalsize);
+		int tsize = fdt32_to_cpu(fdt.totalsize);
 		tsize += padlen;
-		fdt.totalsize = cpu_to_be32(tsize);
+		fdt.totalsize = cpu_to_fdt32(tsize);
 	}
 
 	/*
@@ -410,7 +400,7 @@ void dt_to_blob(FILE *f, struct boot_info *bi, int version,
 	 * the reserve buffer, add the reserve map terminating zeroes,
 	 * the device tree itself, and finally the strings.
 	 */
-	blob = data_append_data(blob, &fdt, sizeof(fdt));
+	blob = data_append_data(blob, &fdt, vi->hdr_size);
 	blob = data_append_align(blob, 8);
 	blob = data_merge(blob, reservebuf);
 	blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry));
@@ -449,7 +439,7 @@ static void dump_stringtable_asm(FILE *f, struct data strbuf)
 	}
 }
 
-void dt_to_asm(FILE *f, struct boot_info *bi, int version, int boot_cpuid_phys)
+void dt_to_asm(FILE *f, struct boot_info *bi, int version)
 {
 	struct version_info *vi = NULL;
 	int i;
@@ -489,7 +479,7 @@ void dt_to_asm(FILE *f, struct boot_info *bi, int version, int boot_cpuid_phys)
 
 	if (vi->flags & FTF_BOOTCPUID)
 		fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n",
-			boot_cpuid_phys);
+			bi->boot_cpuid_phys);
 
 	if (vi->flags & FTF_STRTABSIZE)
 		fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n",
@@ -579,15 +569,15 @@ static void flat_read_chunk(struct inbuf *inb, void *p, int len)
 	inb->ptr += len;
 }
 
-static u32 flat_read_word(struct inbuf *inb)
+static uint32_t flat_read_word(struct inbuf *inb)
 {
-	u32 val;
+	uint32_t val;
 
 	assert(((inb->ptr - inb->base) % sizeof(val)) == 0);
 
 	flat_read_chunk(inb, &val, sizeof(val));
 
-	return be32_to_cpu(val);
+	return fdt32_to_cpu(val);
 }
 
 static void flat_realign(struct inbuf *inb, int align)
@@ -615,7 +605,7 @@ static char *flat_read_string(struct inbuf *inb)
 
 	inb->ptr += len;
 
-	flat_realign(inb, sizeof(u32));
+	flat_realign(inb, sizeof(uint32_t));
 
 	return str;
 }
@@ -632,7 +622,7 @@ static struct data flat_read_data(struct inbuf *inb, int len)
 
 	flat_read_chunk(inb, d.val, len);
 
-	flat_realign(inb, sizeof(u32));
+	flat_realign(inb, sizeof(uint32_t));
 
 	return d;
 }
@@ -659,7 +649,7 @@ static char *flat_read_stringtable(struct inbuf *inb, int offset)
 static struct property *flat_read_property(struct inbuf *dtbuf,
 					   struct inbuf *strbuf, int flags)
 {
-	u32 proplen, stroff;
+	uint32_t proplen, stroff;
 	char *name;
 	struct data val;
 
@@ -693,8 +683,8 @@ static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb)
 	p = inb->ptr;
 	while (1) {
 		flat_read_chunk(inb, &re, sizeof(re));
-		re.address  = be64_to_cpu(re.address);
-		re.size = be64_to_cpu(re.size);
+		re.address  = fdt64_to_cpu(re.address);
+		re.size = fdt64_to_cpu(re.size);
 		if (re.size == 0)
 			break;
 
@@ -708,77 +698,37 @@ static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb)
 
 static char *nodename_from_path(const char *ppath, const char *cpath)
 {
-	const char *lslash;
 	int plen;
 
-	lslash = strrchr(cpath, '/');
-	if (! lslash)
-		return NULL;
-
-	plen = lslash - cpath;
-
-	if (streq(cpath, "/") && streq(ppath, ""))
-		return "";
-
-	if ((plen == 0) && streq(ppath, "/"))
-		return strdup(lslash+1);
-
-	if (! strneq(ppath, cpath, plen))
-		return NULL;
-
-	return strdup(lslash+1);
-}
-
-static const char PROPCHAR[] = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789,._+*#?-";
-static const char UNITCHAR[] = "0123456789abcdef,";
-
-static int check_node_name(const char *name)
-{
-	const char *atpos;
-	int basenamelen;
+	plen = strlen(ppath);
 
-	atpos = strrchr(name, '@');
+	if (!strneq(ppath, cpath, plen))
+		die("Path \"%s\" is not valid as a child of \"%s\"\n",
+		    cpath, ppath);
 
-	if (atpos)
-		basenamelen = atpos - name;
-	else
-		basenamelen = strlen(name);
-
-	if (strspn(name, PROPCHAR) < basenamelen)
-		return -1;
+	/* root node is a special case */
+	if (!streq(ppath, "/"))
+		plen++;
 
-	if (atpos
-	    && ((basenamelen + 1 + strspn(atpos+1, UNITCHAR)) < strlen(name)))
-		return -1;
-
-	return basenamelen;
+	return strdup(cpath + plen);
 }
 
 static struct node *unflatten_tree(struct inbuf *dtbuf,
 				   struct inbuf *strbuf,
-				   const char *parent_path, int flags)
+				   const char *parent_flatname, int flags)
 {
 	struct node *node;
-	u32 val;
+	char *flatname;
+	uint32_t val;
 
 	node = build_node(NULL, NULL);
 
-	if (flags & FTF_FULLPATH) {
-		node->fullpath = flat_read_string(dtbuf);
-		node->name = nodename_from_path(parent_path, node->fullpath);
-
-		if (! node->name)
-			die("Path \"%s\" is not valid as a child of \"%s\"\n",
-			    node->fullpath, parent_path);
-	} else {
-		node->name = flat_read_string(dtbuf);
-		node->fullpath = join_path(parent_path, node->name);
-	}
+	flatname = flat_read_string(dtbuf);
 
-	node->basenamelen = check_node_name(node->name);
-	if (node->basenamelen < 0) {
-		fprintf(stderr, "Warning \"%s\" has incorrect format\n", node->name);
-	}
+	if (flags & FTF_FULLPATH)
+		node->name = nodename_from_path(parent_flatname, flatname);
+	else
+		node->name = flatname;
 
 	do {
 		struct property *prop;
@@ -795,8 +745,7 @@ static struct node *unflatten_tree(struct inbuf *dtbuf,
 			break;
 
 		case FDT_BEGIN_NODE:
-			child = unflatten_tree(dtbuf,strbuf, node->fullpath,
-					       flags);
+			child = unflatten_tree(dtbuf,strbuf, flatname, flags);
 			add_child(node, child);
 			break;
 
@@ -825,10 +774,11 @@ static struct node *unflatten_tree(struct inbuf *dtbuf,
 }
 
 
-struct boot_info *dt_from_blob(FILE *f)
+struct boot_info *dt_from_blob(const char *fname)
 {
-	u32 magic, totalsize, version, size_str, size_dt;
-	u32 off_dt, off_str, off_mem_rsvmap;
+	struct dtc_file *dtcf;
+	uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys;
+	uint32_t off_dt, off_str, off_mem_rsvmap;
 	int rc;
 	char *blob;
 	struct fdt_header *fdt;
@@ -838,54 +788,56 @@ struct boot_info *dt_from_blob(FILE *f)
 	int sizeleft;
 	struct reserve_info *reservelist;
 	struct node *tree;
-	u32 val;
+	uint32_t val;
 	int flags = 0;
 
-	rc = fread(&magic, sizeof(magic), 1, f);
-	if (ferror(f))
+	dtcf = dtc_open_file(fname, NULL);
+
+	rc = fread(&magic, sizeof(magic), 1, dtcf->file);
+	if (ferror(dtcf->file))
 		die("Error reading DT blob magic number: %s\n",
 		    strerror(errno));
 	if (rc < 1) {
-		if (feof(f))
+		if (feof(dtcf->file))
 			die("EOF reading DT blob magic number\n");
 		else
 			die("Mysterious short read reading magic number\n");
 	}
 
-	magic = be32_to_cpu(magic);
+	magic = fdt32_to_cpu(magic);
 	if (magic != FDT_MAGIC)
 		die("Blob has incorrect magic number\n");
 
-	rc = fread(&totalsize, sizeof(totalsize), 1, f);
-	if (ferror(f))
+	rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file);
+	if (ferror(dtcf->file))
 		die("Error reading DT blob size: %s\n", strerror(errno));
 	if (rc < 1) {
-		if (feof(f))
+		if (feof(dtcf->file))
 			die("EOF reading DT blob size\n");
 		else
 			die("Mysterious short read reading blob size\n");
 	}
 
-	totalsize = be32_to_cpu(totalsize);
+	totalsize = fdt32_to_cpu(totalsize);
 	if (totalsize < FDT_V1_SIZE)
 		die("DT blob size (%d) is too small\n", totalsize);
 
 	blob = xmalloc(totalsize);
 
 	fdt = (struct fdt_header *)blob;
-	fdt->magic = cpu_to_be32(magic);
-	fdt->totalsize = cpu_to_be32(totalsize);
+	fdt->magic = cpu_to_fdt32(magic);
+	fdt->totalsize = cpu_to_fdt32(totalsize);
 
 	sizeleft = totalsize - sizeof(magic) - sizeof(totalsize);
 	p = blob + sizeof(magic)  + sizeof(totalsize);
 
 	while (sizeleft) {
-		if (feof(f))
+		if (feof(dtcf->file))
 			die("EOF before reading %d bytes of DT blob\n",
 			    totalsize);
 
-		rc = fread(p, 1, sizeleft, f);
-		if (ferror(f))
+		rc = fread(p, 1, sizeleft, dtcf->file);
+		if (ferror(dtcf->file))
 			die("Error reading DT blob: %s\n",
 			    strerror(errno));
 
@@ -893,19 +845,11 @@ struct boot_info *dt_from_blob(FILE *f)
 		p += rc;
 	}
 
-	off_dt = be32_to_cpu(fdt->off_dt_struct);
-	off_str = be32_to_cpu(fdt->off_dt_strings);
-	off_mem_rsvmap = be32_to_cpu(fdt->off_mem_rsvmap);
-	version = be32_to_cpu(fdt->version);
-
-	fprintf(stderr, "\tmagic:\t\t\t0x%x\n", magic);
-	fprintf(stderr, "\ttotalsize:\t\t%d\n", totalsize);
-	fprintf(stderr, "\toff_dt_struct:\t\t0x%x\n", off_dt);
-	fprintf(stderr, "\toff_dt_strings:\t\t0x%x\n", off_str);
-	fprintf(stderr, "\toff_mem_rsvmap:\t\t0x%x\n", off_mem_rsvmap);
-	fprintf(stderr, "\tversion:\t\t0x%x\n", version );
-	fprintf(stderr, "\tlast_comp_version:\t0x%x\n",
-		be32_to_cpu(fdt->last_comp_version));
+	off_dt = fdt32_to_cpu(fdt->off_dt_struct);
+	off_str = fdt32_to_cpu(fdt->off_dt_strings);
+	off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap);
+	version = fdt32_to_cpu(fdt->version);
+	boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys);
 
 	if (off_mem_rsvmap >= totalsize)
 		die("Mem Reserve structure offset exceeds total size\n");
@@ -916,21 +860,17 @@ struct boot_info *dt_from_blob(FILE *f)
 	if (off_str > totalsize)
 		die("String table offset exceeds total size\n");
 
-	if (version >= 2)
-		fprintf(stderr, "\tboot_cpuid_phys:\t0x%x\n",
-			be32_to_cpu(fdt->boot_cpuid_phys));
-
-	size_str = -1;
 	if (version >= 3) {
-		size_str = be32_to_cpu(fdt->size_dt_strings);
-		fprintf(stderr, "\tsize_dt_strings:\t%d\n", size_str);
+		uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings);
 		if (off_str+size_str > totalsize)
 			die("String table extends past total size\n");
+		inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str);
+	} else {
+		inbuf_init(&strbuf, blob + off_str, blob + totalsize);
 	}
 
 	if (version >= 17) {
-		size_dt = be32_to_cpu(fdt->size_dt_struct);
-		fprintf(stderr, "\tsize_dt_struct:\t\t%d\n", size_dt);
+		size_dt = fdt32_to_cpu(fdt->size_dt_struct);
 		if (off_dt+size_dt > totalsize)
 			die("Structure block extends past total size\n");
 	}
@@ -944,10 +884,6 @@ struct boot_info *dt_from_blob(FILE *f)
 	inbuf_init(&memresvbuf,
 		   blob + off_mem_rsvmap, blob + totalsize);
 	inbuf_init(&dtbuf, blob + off_dt, blob + totalsize);
-	if (size_str >= 0)
-		inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str);
-	else
-		inbuf_init(&strbuf, blob + off_str, blob + totalsize);
 
 	reservelist = flat_read_mem_reserve(&memresvbuf);
 
@@ -964,5 +900,7 @@ struct boot_info *dt_from_blob(FILE *f)
 
 	free(blob);
 
-	return build_boot_info(reservelist, tree);
+	dtc_close_file(dtcf);
+
+	return build_boot_info(reservelist, tree, boot_cpuid_phys);
 }
diff --git a/arch/powerpc/boot/dtc-src/fstree.c b/arch/powerpc/boot/dtc-src/fstree.c
index 2a160a4..766b269 100644
--- a/arch/powerpc/boot/dtc-src/fstree.c
+++ b/arch/powerpc/boot/dtc-src/fstree.c
@@ -31,8 +31,8 @@ static struct node *read_fstree(const char *dirname)
 	struct node *tree;
 
 	d = opendir(dirname);
-	if (! d)
-		die("opendir(): %s\n", strerror(errno));
+	if (!d)
+		die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno));
 
 	tree = build_node(NULL, NULL);
 
@@ -87,8 +87,6 @@ struct boot_info *dt_from_fs(const char *dirname)
 	tree = read_fstree(dirname);
 	tree = name_node(tree, "", NULL);
 
-	fill_fullpaths(tree, "");
-
-	return build_boot_info(NULL, tree);
+	return build_boot_info(NULL, tree, 0);
 }
 
diff --git a/arch/powerpc/boot/dtc-src/libfdt_env.h b/arch/powerpc/boot/dtc-src/libfdt_env.h
new file mode 100644
index 0000000..449bf60
--- /dev/null
+++ b/arch/powerpc/boot/dtc-src/libfdt_env.h
@@ -0,0 +1,23 @@
+#ifndef _LIBFDT_ENV_H
+#define _LIBFDT_ENV_H
+
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+
+#define _B(n)	((unsigned long long)((uint8_t *)&x)[n])
+static inline uint32_t fdt32_to_cpu(uint32_t x)
+{
+	return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3);
+}
+#define cpu_to_fdt32(x) fdt32_to_cpu(x)
+
+static inline uint64_t fdt64_to_cpu(uint64_t x)
+{
+	return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32)
+		| (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7);
+}
+#define cpu_to_fdt64(x) fdt64_to_cpu(x)
+#undef _B
+
+#endif /* _LIBFDT_ENV_H */
diff --git a/arch/powerpc/boot/dtc-src/livetree.c b/arch/powerpc/boot/dtc-src/livetree.c
index 6ba0846..0ca3de5 100644
--- a/arch/powerpc/boot/dtc-src/livetree.c
+++ b/arch/powerpc/boot/dtc-src/livetree.c
@@ -115,6 +115,7 @@ void add_child(struct node *parent, struct node *child)
 	struct node **p;
 
 	child->next_sibling = NULL;
+	child->parent = parent;
 
 	p = &parent->children;
 	while (*p)
@@ -123,7 +124,8 @@ void add_child(struct node *parent, struct node *child)
 	*p = child;
 }
 
-struct reserve_info *build_reserve_entry(u64 address, u64 size, char *label)
+struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size,
+					 char *label)
 {
 	struct reserve_info *new = xmalloc(sizeof(*new));
 
@@ -165,13 +167,14 @@ struct reserve_info *add_reserve_entry(struct reserve_info *list,
 }
 
 struct boot_info *build_boot_info(struct reserve_info *reservelist,
-				  struct node *tree)
+				  struct node *tree, uint32_t boot_cpuid_phys)
 {
 	struct boot_info *bi;
 
 	bi = xmalloc(sizeof(*bi));
 	bi->reservelist = reservelist;
 	bi->dt = tree;
+	bi->boot_cpuid_phys = boot_cpuid_phys;
 
 	return bi;
 }
@@ -202,7 +205,7 @@ struct property *get_property(struct node *node, const char *propname)
 cell_t propval_cell(struct property *prop)
 {
 	assert(prop->val.len == sizeof(cell_t));
-	return be32_to_cpu(*((cell_t *)prop->val.val));
+	return fdt32_to_cpu(*((cell_t *)prop->val.val));
 }
 
 struct node *get_subnode(struct node *node, const char *nodename)
diff --git a/arch/powerpc/boot/dtc-src/srcpos.c b/arch/powerpc/boot/dtc-src/srcpos.c
index 352b0fe..9641b76 100644
--- a/arch/powerpc/boot/dtc-src/srcpos.c
+++ b/arch/powerpc/boot/dtc-src/srcpos.c
@@ -20,86 +20,97 @@
 #include "dtc.h"
 #include "srcpos.h"
 
-
-/*
- * Record the complete unique set of opened file names.
- * Primarily used to cache source position file names.
- */
-#define MAX_N_FILE_NAMES	(100)
-
-const char *file_names[MAX_N_FILE_NAMES];
-static int n_file_names = 0;
-
 /*
  * Like yylineno, this is the current open file pos.
  */
 
-int srcpos_filenum = -1;
-
+struct dtc_file *srcpos_file;
 
-
-FILE *dtc_open_file(const char *fname)
+static int dtc_open_one(struct dtc_file *file,
+                        const char *search,
+                        const char *fname)
 {
-	FILE *f;
+	char *fullname;
 
-	if (lookup_file_name(fname, 1) < 0)
-		die("Too many files opened\n");
+	if (search) {
+		fullname = xmalloc(strlen(search) + strlen(fname) + 2);
 
-	if (streq(fname, "-"))
-		f = stdin;
-	else
-		f = fopen(fname, "r");
+		strcpy(fullname, search);
+		strcat(fullname, "/");
+		strcat(fullname, fname);
+	} else {
+		fullname = strdup(fname);
+	}
 
-	if (! f)
-		die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
+	file->file = fopen(fullname, "r");
+	if (!file->file) {
+		free(fullname);
+		return 0;
+	}
 
-	return f;
+	file->name = fullname;
+	return 1;
 }
 
 
+struct dtc_file *dtc_open_file(const char *fname,
+                               const struct search_path *search)
+{
+	static const struct search_path default_search = { NULL, NULL, NULL };
 
-/*
- * Locate and optionally add filename fname in the file_names[] array.
- *
- * If the filename is currently not in the array and the boolean
- * add_it is non-zero, an attempt to add the filename will be made.
- *
- * Returns;
- *    Index [0..MAX_N_FILE_NAMES) where the filename is kept
- *    -1 if the name can not be recorded
- */
+	struct dtc_file *file;
+	const char *slash;
 
-int lookup_file_name(const char *fname, int add_it)
-{
-	int i;
+	file = xmalloc(sizeof(struct dtc_file));
 
-	for (i = 0; i < n_file_names; i++) {
-		if (strcmp(file_names[i], fname) == 0)
-			return i;
+	slash = strrchr(fname, '/');
+	if (slash) {
+		char *dir = xmalloc(slash - fname + 1);
+
+		memcpy(dir, fname, slash - fname);
+		dir[slash - fname] = 0;
+		file->dir = dir;
+	} else {
+		file->dir = NULL;
 	}
 
-	if (add_it) {
-		if (n_file_names < MAX_N_FILE_NAMES) {
-			file_names[n_file_names] = strdup(fname);
-			return n_file_names++;
-		}
+	if (streq(fname, "-")) {
+		file->name = "stdin";
+		file->file = stdin;
+		return file;
 	}
 
-	return -1;
-}
+	if (fname[0] == '/') {
+		file->file = fopen(fname, "r");
+		if (!file->file)
+			goto fail;
+
+		file->name = strdup(fname);
+		return file;
+	}
 
+	if (!search)
+		search = &default_search;
 
-const char *srcpos_filename_for_num(int filenum)
-{
-	if (0 <= filenum && filenum < n_file_names) {
-		return file_names[filenum];
+	while (search) {
+		if (dtc_open_one(file, search->dir, fname))
+			return file;
+
+		if (errno != ENOENT)
+			goto fail;
+
+		search = search->next;
 	}
 
-	return 0;
+fail:
+	die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
 }
 
-
-const char *srcpos_get_filename(void)
+void dtc_close_file(struct dtc_file *file)
 {
-	return srcpos_filename_for_num(srcpos_filenum);
+	if (fclose(file->file))
+		die("Error closing \"%s\": %s\n", file->name, strerror(errno));
+
+	free(file->dir);
+	free(file);
 }
diff --git a/arch/powerpc/boot/dtc-src/srcpos.h b/arch/powerpc/boot/dtc-src/srcpos.h
index ce7ab5b..e17c7c0 100644
--- a/arch/powerpc/boot/dtc-src/srcpos.h
+++ b/arch/powerpc/boot/dtc-src/srcpos.h
@@ -22,13 +22,21 @@
  * array of all opened filenames.
  */
 
+#include <stdio.h>
+
+struct dtc_file {
+	char *dir;
+	const char *name;
+	FILE *file;
+};
+
 #if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED)
 typedef struct YYLTYPE {
     int first_line;
     int first_column;
     int last_line;
     int last_column;
-    int filenum;
+    struct dtc_file *file;
 } YYLTYPE;
 
 #define YYLTYPE_IS_DECLARED	1
@@ -48,7 +56,7 @@ typedef struct YYLTYPE {
 	  (Current).first_column = YYRHSLOC (Rhs, 1).first_column;	\
 	  (Current).last_line    = YYRHSLOC (Rhs, N).last_line;		\
 	  (Current).last_column  = YYRHSLOC (Rhs, N).last_column;	\
-	  (Current).filenum      = YYRHSLOC (Rhs, N).filenum;		\
+	  (Current).file         = YYRHSLOC (Rhs, N).file;		\
 	}								\
       else								\
 	{								\
@@ -56,20 +64,22 @@ typedef struct YYLTYPE {
 	    YYRHSLOC (Rhs, 0).last_line;				\
 	  (Current).first_column = (Current).last_column =		\
 	    YYRHSLOC (Rhs, 0).last_column;				\
-	  (Current).filenum      = YYRHSLOC (Rhs, 0).filenum;		\
+	  (Current).file         = YYRHSLOC (Rhs, 0).file;		\
 	}								\
     while (YYID (0))
 
 
 
 extern void yyerror(char const *);
+extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2)));
 
-extern int srcpos_filenum;
+extern struct dtc_file *srcpos_file;
 
-extern int push_input_file(const char *filename);
-extern int pop_input_file(void);
+struct search_path {
+	const char *dir; /* NULL for current directory */
+	struct search_path *prev, *next;
+};
 
-extern FILE *dtc_open_file(const char *fname);
-extern int lookup_file_name(const char *fname, int add_it);
-extern const char *srcpos_filename_for_num(int filenum);
-const char *srcpos_get_filename(void);
+extern struct dtc_file *dtc_open_file(const char *fname,
+                                      const struct search_path *search);
+extern void dtc_close_file(struct dtc_file *file);
diff --git a/arch/powerpc/boot/dtc-src/treesource.c b/arch/powerpc/boot/dtc-src/treesource.c
index a6a7767..ebeb6eb 100644
--- a/arch/powerpc/boot/dtc-src/treesource.c
+++ b/arch/powerpc/boot/dtc-src/treesource.c
@@ -23,20 +23,23 @@
 
 extern FILE *yyin;
 extern int yyparse(void);
-extern void yyerror(char const *);
 
 struct boot_info *the_boot_info;
+int treesource_error;
 
 struct boot_info *dt_from_source(const char *fname)
 {
 	the_boot_info = NULL;
+	treesource_error = 0;
 
-	push_input_file(fname);
+	srcpos_file = dtc_open_file(fname, NULL);
+	yyin = srcpos_file->file;
 
 	if (yyparse() != 0)
-		return NULL;
+		die("Unable to parse input tree\n");
 
-	fill_fullpaths(the_boot_info->dt, "");
+	if (treesource_error)
+		die("Syntax error parsing input tree\n");
 
 	return the_boot_info;
 }
@@ -144,7 +147,7 @@ static void write_propval_cells(FILE *f, struct data val)
 			m = m->next;
 		}
 
-		fprintf(f, "0x%x", be32_to_cpu(*cp++));
+		fprintf(f, "0x%x", fdt32_to_cpu(*cp++));
 		if ((void *)cp >= propend)
 			break;
 		fprintf(f, " ");
@@ -173,7 +176,7 @@ static void write_propval_bytes(FILE *f, struct data val)
 		}
 
 		fprintf(f, "%02hhx", *bp++);
-		if ((void *)bp >= propend)
+		if ((const void *)bp >= propend)
 			break;
 		fprintf(f, " ");
 	}
diff --git a/arch/powerpc/boot/dtc-src/version_gen.h b/arch/powerpc/boot/dtc-src/version_gen.h
index 6c34303..658ff42 100644
--- a/arch/powerpc/boot/dtc-src/version_gen.h
+++ b/arch/powerpc/boot/dtc-src/version_gen.h
@@ -1 +1 @@
-#define DTC_VERSION "DTC 1.0.0-gd6f9b62f"
+#define DTC_VERSION "DTC 1.2.0"
diff --git a/arch/powerpc/boot/dts/acadia.dts b/arch/powerpc/boot/dts/acadia.dts
new file mode 100644
index 0000000..57291f6
--- /dev/null
+++ b/arch/powerpc/boot/dts/acadia.dts
@@ -0,0 +1,224 @@
+/*
+ * Device Tree Source for AMCC Acadia (405EZ)
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "amcc,acadia";
+	compatible = "amcc,acadia";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EZ";
+			reg = <0x0>;
+			clock-frequency = <0>; /* Filled in by wrapper */
+			timebase-frequency = <0>; /* Filled in by wrapper */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>; /* Filled in by wrapper */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic-405ez", "ibm,uic";
+		interrupt-controller;
+		dcr-reg = <0x0c0 0x009>;
+		cell-index = <0>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb-405ez", "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by wrapper */
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-405ez", "ibm,mcmal";
+			dcr-reg = <0x380 0x62>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&UIC0>;
+			/* 405EZ has only 3 interrupts to the UIC, as
+			 * SERR, TXDE, and RXDE are or'd together into
+			 * one UIC bit
+			 */
+			interrupts = <
+				0x13 0x4 /* TXEOB */
+				0x15 0x4 /* RXEOB */
+				0x12 0x4 /* SERR, TXDE, RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ez", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			dcr-reg = <0x0a 0x05>;
+			clock-frequency = <0>; /* Filled in by wrapper */
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x8>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by wrapper */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x5 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x8>;
+				clock-frequency = <0>; /* Filled in by wrapper */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x6 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405ez", "ibm,iic";
+				reg = <0xef600500 0x11>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0xa 0x4>;
+			};
+
+			GPIO0: gpio@ef600700 {
+				compatible = "ibm,gpio-405ez";
+				reg = <0xef600700 0x20>;
+			};
+
+			GPIO1: gpio@ef600800 {
+				compatible = "ibm,gpio-405ez";
+				reg = <0xef600800 0x20>;
+			};
+
+			EMAC0: ethernet@ef600900 {
+				device_type = "network";
+				compatible = "ibm,emac-405ez", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0x10 0x4 /* Ethernet */
+					0x11 0x4 /* Ethernet Wake up */>;
+				local-mac-address = [000000000000]; /* Filled in by wrapper */
+				reg = <0xef600900 0x70>;
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "mii";
+				phy-map = <0x0>;
+			};
+
+			CAN0: can@ef601000 {
+				compatible = "amcc,can-405ez";
+				reg = <0xef601000 0x620>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			CAN1: can@ef601800 {
+				compatible = "amcc,can-405ez";
+				reg = <0xef601800 0x620>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x8 0x4>;
+			};
+
+			cameleon@ef602000 {
+				compatible = "amcc,cameleon-405ez";
+				reg = <0xef602000 0x800>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0xb 0x4 0xc 0x4>;
+			};
+
+			ieee1588@ef602800 {
+				compatible = "amcc,ieee1588-405ez";
+				reg = <0xef602800 0x60>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x4 0x4>;
+				/* This thing is a bit weird.  It has it's own UIC
+				 * that it uses to generate snapshot triggers.  We
+				 * don't really support this device yet, and it needs
+				 * work to figure this out.
+				 */
+				dcr-reg = <0xe0 0x9>;
+			};
+
+			usb@ef603000 {
+				compatible = "ohci-be";
+				reg = <0xef603000 0x80>;
+				interrupts-parent = <&UIC0>;
+				interrupts = <0xd 0x4 0xe 0x4>;
+			};
+
+			dac@ef603300 {
+				compatible = "amcc,dac-405ez";
+				reg = <0xef603300 0x40>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x18 0x4>;
+			};
+
+			adc@ef603400 {
+				compatible = "amcc,adc-405ez";
+				reg = <0xef603400 0x40>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x17 0x4>;
+			};
+
+			spi@ef603500 {
+				compatible = "amcc,spi-405ez";
+				reg = <0xef603500 0x100>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x9 0x4>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405ez", "ibm,ebc";
+			dcr-reg = <0x12 0x2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			clock-frequency = <0>; /* Filled in by wrapper */
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts
new file mode 100644
index 0000000..d9113b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/arches.dts
@@ -0,0 +1,293 @@
+/*
+ * Device Tree Source for AMCC Arches (dual 460GT board)
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Victor Gallardo <vgallardo@amcc.com>
+ * Adam Graham <agraham@amcc.com>
+ *
+ * Based on the glacier.dts file
+ *   Stefan Roese <sr@denx.de>
+ *   Copyright 2008 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,arches";
+	compatible = "amcc,arches";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <3>;
+			num-rx-chans = <24>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "sgmii";
+				phy-map = <0xffffffff>;
+				gpcs-address = <0x0000000a>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "sgmii";
+				phy-map = <0x00000000>;
+				gpcs-address = <0x0000000b>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "sgmii";
+				phy-map = <0x00000001>;
+				gpcs-address = <0x0000000C>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 8b1bb0e..6235fca 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -130,24 +130,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
new file mode 100644
index 0000000..6ed6083
--- /dev/null
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -0,0 +1,293 @@
+/*
+ * GE Fanuc SBC610 Device Tree Source
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
+ */
+
+/dts-v1/;
+
+/ {
+	model = "GEF_SBC610";
+	compatible = "gef,sbc610";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	// From uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	// From uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	localbus@fef05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8641-localbus", "simple-bus";
+		reg = <0xf8005000 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0 0 0xff000000 0x01000000     // 16MB Boot flash
+			  1 0 0xe8000000 0x08000000     // Paged Flash 0
+			  2 0 0xe0000000 0x08000000     // Paged Flash 1
+			  3 0 0xfc100000 0x00020000     // NVRAM
+			  4 0 0xfc000000 0x00008000     // FPGA
+			  5 0 0xfc008000 0x00008000     // AFIX FPGA
+			  6 0 0xfd000000 0x00800000     // IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;   // IO FPGA (32-bit)
+
+		fpga@4,0 {
+			compatible = "gef,fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,fpga-pic";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8
+				      0x9>;
+			interrupt-parent = <&mpic>;
+
+		};
+	};
+
+	soc@fef00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xfef00000 0x00100000>;
+		reg = <0xfef00000 0x100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c1: i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <0x2b 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		i2c2: i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <0x2b 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+					   "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+					   "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+					   "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+					   "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		enet1: ethernet@26000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <0x2a 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <0x1c 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,mpc8641-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xfef08000 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <0x18 0x2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
+		>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index 24cf0db..f3787a2 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -14,7 +14,7 @@
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,glacier";
-	compatible = "amcc,glacier", "amcc,canyonlands";
+	compatible = "amcc,glacier";
 	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts
new file mode 100644
index 0000000..7988598
--- /dev/null
+++ b/arch/powerpc/boot/dts/hcu4.dts
@@ -0,0 +1,168 @@
+/*
+* Device Tree Source for Netstal Maschinen HCU4
+* based on the IBM Walnut
+*
+* Copyright 2008
+* Niklaus Giger <niklaus.giger@member.fsf.org>
+*
+* Copyright 2007 IBM Corp.
+* Josh Boyer <jwboyer@linux.vnet.ibm.com>
+*
+* This file is licensed under the terms of the GNU General Public
+* License version 2.  This program is licensed "as is" without
+* any warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+/ {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	model = "netstal,hcu4";
+	compatible = "netstal,hcu4";
+	dcr-parent = <0x1>;
+
+	aliases {
+		ethernet0 = "/plb/opb/ethernet@ef600800";
+		serial0 = "/plb/opb/serial@ef600300";
+	};
+
+	cpus {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405GPr";
+			reg = <0x0>;
+			clock-frequency = <0>;		/* Filled in by U-Boot */
+			timebase-frequency = <0x0>;	/* Filled in by U-Boot */
+			i-cache-line-size = <0x20>;
+			d-cache-line-size = <0x20>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+			dcr-controller;
+			dcr-access-method = "native";
+			linux,phandle = <0x1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;	/* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0x0>;
+		dcr-reg = <0xc0 0x9>;
+		#address-cells = <0x0>;
+		#size-cells = <0x0>;
+		#interrupt-cells = <0x2>;
+		linux,phandle = <0x2>;
+	};
+
+	plb {
+		compatible = "ibm,plb3";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+		clock-frequency = <0x0>;	/* Filled in by U-Boot */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405gp";
+			dcr-reg = <0x10 0x2>;
+		};
+
+		MAL: mcmal {
+			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x62>;
+			num-tx-chans = <0x1>;
+			num-rx-chans = <0x1>;
+			interrupt-parent = <0x2>;
+			interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
+			linux,phandle = <0x3>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405gp", "ibm,opb";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			ranges = <0xef600000 0xef600000 0xa00000>;
+			dcr-reg = <0xa0 0x5>;
+			clock-frequency = <0x0>;	/* Filled in by U-Boot */
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x8>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0x0>;/* Filled in by U-Boot */
+				current-speed = <0>;	/* Filled in by U-Boot */
+				interrupt-parent = <0x2>;
+				interrupts = <0x0 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405gp", "ibm,iic";
+				reg = <0xef600500 0x11>;
+				interrupt-parent = <0x2>;
+				interrupts = <0x2 0x4>;
+			};
+
+			GPIO: gpio@ef600700 {
+				compatible = "ibm,gpio-405gp";
+				reg = <0xef600700 0x20>;
+			};
+
+			EMAC: ethernet@ef600800 {
+				device_type = "network";
+				compatible = "ibm,emac-405gp", "ibm,emac";
+				interrupt-parent = <0x2>;
+				interrupts = <0xf 0x4 0x9 0x4>;
+				local-mac-address = [00 00 00 00 00 00];
+				reg = <0xef600800 0x70>;
+				mal-device = <0x3>;
+				mal-tx-channel = <0x0>;
+				mal-rx-channel = <0x0>;
+				cell-index = <0x0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <0x1>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405gp", "ibm,ebc";
+			dcr-reg = <0x12 0x2>;
+			#address-cells = <0x2>;
+			#size-cells = <0x1>;
+			clock-frequency = <0x0>;	/* Filled in by U-Boot */
+
+			sram@0,0 {
+				reg = <0x0 0x0 0x80000>;
+			};
+
+			flash@0,80000 {
+				compatible = "jedec-flash";
+				bank-width = <0x1>;
+				reg = <0x0 0x80000 0x80000>;
+				#address-cells = <0x1>;
+				#size-cells = <0x1>;
+
+				partition@0 {
+					label = "OpenBIOS";
+					reg = <0x0 0x80000>;
+					read-only;
+				};
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts
index f87fe7b..c6e11eb 100644
--- a/arch/powerpc/boot/dts/holly.dts
+++ b/arch/powerpc/boot/dts/holly.dts
@@ -133,61 +133,61 @@
 			reg = <0x00007400 0x00000400>;
 			big-endian;
 		};
+	};
 
-		pci@1000 {
-			device_type = "pci";
-			compatible = "tsi109-pci", "tsi108-pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <0x00001000 0x00001000>;
-			bus-range = <0x0 0x0>;
-			/*----------------------------------------------------+
-			| PCI memory range.
-			| 01 denotes I/O space
-			| 02 denotes 32-bit memory space
-			+----------------------------------------------------*/
-			ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
-				  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
-			clock-frequency = <133333332>;
-			interrupt-parent = <&MPIC>;
+	pci@c0001000 {
+		device_type = "pci";
+		compatible = "tsi109-pci", "tsi108-pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xc0001000 0x00001000>;
+		bus-range = <0x0 0x0>;
+		/*----------------------------------------------------+
+		| PCI memory range.
+		| 01 denotes I/O space
+		| 02 denotes 32-bit memory space
+		+----------------------------------------------------*/
+		ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+			  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+		clock-frequency = <133333332>;
+		interrupt-parent = <&MPIC>;
+		interrupts = <0x17 0x2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		/*----------------------------------------------------+
+		| The INTA, INTB, INTC, INTD are shared.
+		+----------------------------------------------------*/
+		interrupt-map = <
+			0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+			0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+			0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+			0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+			0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+			0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+			0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+			0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+			0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+			0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+			0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+			0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+			0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+			0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+			0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+			0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
+			>;
+
+		RT0: router@1180 {
+			device_type = "pic-router";
+			interrupt-controller;
+			big-endian;
+			clock-frequency = <0>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
 			interrupts = <0x17 0x2>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			/*----------------------------------------------------+
-			| The INTA, INTB, INTC, INTD are shared.
-			+----------------------------------------------------*/
-			interrupt-map = <
-				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
-				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
-				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
-				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
-
-				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
-				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
-				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
-				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
-
-				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
-				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
-				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
-				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
-
-				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
-				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
-				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
-				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
-				>;
-
-			RT0: router@1180 {
- 				device_type = "pic-router";
- 				interrupt-controller;
- 				big-endian;
- 				clock-frequency = <0>;
- 				#address-cells = <0>;
- 				#interrupt-cells = <2>;
- 				interrupts = <0x17 0x2>;
-				interrupt-parent = <&MPIC>;
-			};
+			interrupt-parent = <&MPIC>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
new file mode 100644
index 0000000..633255a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -0,0 +1,174 @@
+/*
+ * Device Tree for the MGCOGE plattform from keymile
+ *
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "MGCOGE";
+	compatible = "keymile,mgcoge";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &eth0;
+		serial0 = &smc2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8247@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			bus-frequency = <0>; /* Filled in by U-Boot */
+		};
+	};
+
+	localbus@f0010100 {
+		compatible = "fsl,mpc8247-localbus",
+		             "fsl,pq2-localbus",
+		             "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xf0010100 0x40>;
+
+		ranges = <0 0 0xfe000000 0x00400000
+			  5 0 0x50000000 0x20000000
+			>; /* Filled in by U-Boot */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x40000>;
+			};
+			partition@40000 {
+				label = "env";
+				reg = <0x40000 0x20000>;
+			};
+			partition@60000 {
+				label = "kernel";
+				reg = <0x60000 0x220000>;
+			};
+			partition@280000 {
+				label = "dtb";
+				reg = <0x280000 0x20000>;
+			};
+		};
+
+		flash@5,0 {
+			compatible = "cfi-flash";
+			reg = <5 0x0 0x2000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			device-width = <2>;
+			partition@0 {
+				label = "ramdisk";
+				reg = <0 0x7a0000>;
+			};
+			partition@7a0000 {
+				label = "user";
+				reg = <0x7a0000 0x1860000>;
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>; /* Filled in by U-Boot */
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8247-immr", "fsl,pq2-soc", "simple-bus";
+		ranges = <0x00000000 0xf0000000 0x00053000>;
+
+		// Temporary until code stops depending on it.
+		device_type = "soc";
+
+		cpm@119c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,mpc8247-cpm", "fsl,cpm2",
+					"simple-bus";
+			reg = <0x119c0 0x30>;
+			ranges;
+
+			muram {
+				compatible = "fsl,cpm-muram";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x80 0x1f80 0x9800 0x800>;
+				};
+			};
+
+			brg@119f0 {
+				compatible = "fsl,mpc8247-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x119f0 0x10 0x115f0 0x10>;
+			};
+
+			/* Monitor port/SMC2 */
+			smc2: serial@11a90 {
+				device_type = "serial";
+				compatible = "fsl,mpc8247-smc-uart",
+				             "fsl,cpm2-smc-uart";
+				reg = <0x11a90 0x20 0x88fc 0x02>;
+				interrupts = <5 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x21200000>;
+				current-speed = <0>; /* Filled in by U-Boot */
+			};
+
+			eth0: ethernet@11a60 {
+				device_type = "network";
+				compatible = "fsl,mpc8247-scc-enet",
+				             "fsl,cpm2-scc-enet";
+				reg = <0x11a60 0x20 0x8300 0x100 0x11390 1>;
+				local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+				interrupts = <43 8>;
+				interrupt-parent = <&PIC>;
+				linux,network-index = <0>;
+				fsl,cpm-command = <0xce00000>;
+				fixed-link = <0 0 10 0 0>;
+			};
+
+		};
+
+		PIC: interrupt-controller@10c00 {
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x10c00 0x80>;
+			compatible = "fsl,mpc8247-pic", "fsl,pq2-pic";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mgsuvd.dts b/arch/powerpc/boot/dts/mgsuvd.dts
new file mode 100644
index 0000000..e4fc53a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mgsuvd.dts
@@ -0,0 +1,163 @@
+/*
+ * MGSUVD Device Tree Source
+ *
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "MGSUVD";
+	compatible = "keymile,mgsuvd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,852@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			timebase-frequency = <0>;	/* Filled in by u-boot */
+			bus-frequency = <0>;		/* Filled in by u-boot */
+			clock-frequency = <0>;		/* Filled in by u-boot */
+			interrupts = <15 2>;		/* decrementer interrupt */
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 0x4000000>;  /* Filled in by u-boot */
+	};
+
+	localbus@fff00100 {
+		compatible = "fsl,mpc852-localbus", "fsl,pq1-localbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xfff00100 0x40>;
+
+		ranges = <0 0 0xf0000000 0x01000000>;  /* Filled in by u-boot */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x1000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x80000>;
+			};
+			partition@80000 {
+				label = "env";
+				reg = <0x80000 0x20000>;
+			};
+			partition@a0000 {
+				label = "kernel";
+				reg = <0xa0000 0x1e0000>;
+			};
+			partition@280000 {
+				label = "dtb";
+				reg = <0x280000 0x20000>;
+			};
+			partition@2a0000 {
+			        label = "root";
+			        reg = <0x2a0000 0x500000>;
+			};
+			partition@7a0000 {
+			        label = "user";
+			        reg = <0x7a0000 0x860000>;
+			};
+		};
+	};
+
+	soc@fff00000 {
+		compatible = "fsl,mpc852", "fsl,pq1-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0 0xfff00000 0x00004000>;
+
+		PIC: interrupt-controller@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0 24>;
+			compatible = "fsl,mpc852-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc852-cpm", "fsl,cpm1", "simple-bus";
+			interrupts = <0>;	/* cpm error interrupt */
+			interrupt-parent = <&CPM_PIC>;
+			reg = <0x9c0 10>;
+			ranges;
+
+			muram@2000 {
+				compatible = "fsl,cpm-muram";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x800 0x1800>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc852-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				reg = <0x9f0 0x10>;
+				clock-frequency = <0>; /* Filled in by u-boot */
+			};
+
+			CPM_PIC: interrupt-controller@930 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,cpm1-pic";
+			};
+
+			/* MON-1 */
+			serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3fc0 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x0090>;
+				current-speed = <0>; /* Filled in by u-boot */
+			};
+
+			ethernet@a40 {
+				device_type = "network";
+				compatible  = "fsl,mpc866-scc-enet",
+				              "fsl,cpm1-scc-enet";
+				reg = <0xa40 0x18 0x3e00 0x100>;
+				local-mac-address = [ 00 00 00 00 00 00 ];  /* Filled in by u-boot */
+				interrupts = <28>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x80>;
+				fixed-link = <0 0 10 0 0>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 1f9036c..c2b8dbf 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -403,7 +403,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0x80008500 0x100>;
+		reg = <0x80008500 0x100		/* internal registers */
+		       0x80008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc5121-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 2a94ae0..747f276 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -176,24 +176,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -359,7 +363,8 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			reg = <0xe0008500 0x100>;
+			reg = <0xe0008500 0x100		/* internal registers */
+			       0xe0008300 0x8>;		/* config space access registers */
 			compatible = "fsl,mpc8349-pci";
 			device_type = "pci";
 		};
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index f704513..6b85067 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -121,6 +121,14 @@
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8315erdb",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		spi@7000 {
@@ -144,24 +152,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -314,7 +326,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index fbc9304..57c595b 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -60,7 +60,7 @@
 	};
 
 	bcsr@f8000000 {
-		device_type = "board-control";
+		compatible = "fsl,mpc8323mds-bcsr";
 		reg = <0xf8000000 0x8000>;
 	};
 
@@ -127,24 +127,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -419,7 +423,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index b157d18..226ff06 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -105,24 +105,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -327,7 +331,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 700e076..2c9d54a 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -83,6 +83,14 @@
 			interrupts = <15 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
+
+			rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <18 0x8>;
+				interrupt-parent = <&ipic>;
+			};
 		};
 
 		spi@7000 {
@@ -106,27 +114,39 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8349emitx",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		usb@22000 {
@@ -250,7 +270,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
@@ -276,7 +297,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008600 0x100>;
+		reg = <0xe0008600 0x100		/* internal registers */
+		       0xe0008380 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index cdd3063..fa40647 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -81,6 +81,14 @@
 			interrupts = <15 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
+
+			rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <18 0x8>;
+				interrupt-parent = <&ipic>;
+			};
 		};
 
 		spi@7000 {
@@ -104,24 +112,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -224,7 +236,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008600 0x100>;
+		reg = <0xe0008600 0x100		/* internal registers */
+		       0xe0008380 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 783241c..c986c54 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -49,7 +49,7 @@
 	};
 
 	bcsr@e2400000 {
-		device_type = "board-control";
+		compatible = "fsl,mpc8349mds-bcsr";
 		reg = <0xe2400000 0x8000>;
 	};
 
@@ -116,24 +116,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -311,7 +315,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
@@ -372,7 +377,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008600 0x100>;
+		reg = <0xe0008600 0x100		/* internal registers */
+		       0xe0008380 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index a3b76a7..14534d0 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -52,9 +52,26 @@
 		reg = <0x00000000 0x10000000>;
 	};
 
-	bcsr@f8000000 {
-		device_type = "board-control";
-		reg = <0xf8000000 0x8000>;
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xfe000000 0x02000000
+		          1 0 0xf8000000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		bcsr@1,0 {
+ 			compatible = "fsl,mpc8360mds-bcsr";
+			reg = <1 0 0x8000>;
+		};
 	};
 
 	soc8360@e0000000 {
@@ -131,24 +148,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -405,7 +426,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 89c9202..decadf3 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -125,24 +125,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -383,6 +387,18 @@
 			device-width = <1>;
 		};
 
+		upm@1,0 {
+			compatible = "fsl,upm-nand";
+			reg = <1 0 1>;
+			fsl,upm-addr-offset = <16>;
+			fsl,upm-cmd-offset = <8>;
+			gpios = <&qe_pio_e 18 0>;
+
+			flash {
+				compatible = "stm,nand512-a";
+			};
+		};
+
 		display@2,0 {
 			device_type = "display";
 			compatible = "fujitsu,MB86277", "fujitsu,mint";
@@ -405,7 +421,8 @@
 		#interrupt-cells = <1>;
 		device_type = "pci";
 		compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
 			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
 			  0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 432782b..0484561 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -136,6 +136,13 @@
 			interrupts = <14 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+				interrupts = <19 0x8>;
+				interrupt-parent = <&ipic>;
+			};
 		};
 
 		i2c@3100 {
@@ -246,24 +253,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <0x47 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <0x47 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <0x47 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <0x47 8>;
 			};
@@ -374,7 +385,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index ed137aa..435ef3d 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -121,6 +121,14 @@
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8377erdb",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		i2c@3100 {
@@ -155,24 +163,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -315,7 +327,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index ed32c8d..67a08d2 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -136,6 +136,13 @@
 			interrupts = <14 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+				interrupts = <19 0x8>;
+				interrupt-parent = <&ipic>;
+			};
 		};
 
 		i2c@3100 {
@@ -170,24 +177,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -360,7 +371,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 34a7f2f..b11e68f 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -121,6 +121,14 @@
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8378erdb",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		i2c@3100 {
@@ -155,24 +163,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -301,7 +313,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index f4db9ed..323370a 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -136,6 +136,13 @@
 			interrupts = <14 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+				interrupts = <19 0x8>;
+				interrupt-parent = <&ipic>;
+			};
 		};
 
 		i2c@3100 {
@@ -170,24 +177,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -388,7 +399,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index e4d7030..337af6e 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -121,6 +121,14 @@
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8379erdb",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		i2c@3100 {
@@ -155,24 +163,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -329,7 +341,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 1505d68..35db1e5 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -91,6 +91,8 @@
 			rtc@68 {
 				compatible = "dallas,ds3232";
 				reg = <0x68>;
+				interrupts = <0 0x1>;
+				interrupt-parent = <&mpic>;
 			};
 		};
 
@@ -107,7 +109,7 @@
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupt-parent = <&mpic>;
-				interrupts = <14 0x2>;
+				interrupts = <20 2>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8536-dma-channel",
@@ -115,7 +117,7 @@
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupt-parent = <&mpic>;
-				interrupts = <15 0x2>;
+				interrupts = <21 2>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8536-dma-channel",
@@ -123,7 +125,7 @@
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupt-parent = <&mpic>;
-				interrupts = <16 0x2>;
+				interrupts = <22 2>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8536-dma-channel",
@@ -131,7 +133,7 @@
 				reg = <0x180 0x80>;
 				cell-index = <3>;
 				interrupt-parent = <&mpic>;
-				interrupts = <17 0x2>;
+				interrupts = <23 2>;
 			};
 		};
 
@@ -178,7 +180,7 @@
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
-			model = "TSEC";
+			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
@@ -191,7 +193,7 @@
 		enet1: ethernet@26000 {
 			cell-index = <1>;
 			device_type = "network";
-			model = "TSEC";
+			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index a15f103..c80158f 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -52,7 +52,7 @@
 	};
 
 	bcsr@f8000000 {
-		device_type = "board-control";
+		compatible = "fsl,mpc8568mds-bcsr";
 		reg = <0xf8000000 0x8000>;
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index e124dd1..cadd465 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -13,8 +13,8 @@
 / {
 	model = "fsl,MPC8572DS";
 	compatible = "fsl,MPC8572DS";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
@@ -61,7 +61,6 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x0>;	// Filled by U-Boot
 	};
 
 	soc8572@ffe00000 {
@@ -69,8 +68,8 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		compatible = "simple-bus";
-		ranges = <0x0 0xffe00000 0x100000>;
-		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
+		ranges = <0x0 0 0xffe00000 0x100000>;
+		reg = <0 0xffe00000 0 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		memory-controller@2000 {
@@ -351,10 +350,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe08000 0x1000>;
+		reg = <0 0xffe08000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
@@ -561,10 +560,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe09000 0x1000>;
+		reg = <0 0xffe09000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <26 2>;
@@ -598,10 +597,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe0a000 0x1000>;
+		reg = <0 0xffe0a000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <27 2>;
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 584a4f1..f724d72 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -207,7 +207,7 @@
 			reg = <0xe4000 0x100>;
 		};
 
-		i2s@16000 {
+		ssi@16000 {
 			compatible = "fsl,mpc8610-ssi";
 			cell-index = <0>;
 			reg = <0x16000 0x100>;
@@ -215,6 +215,8 @@
 			interrupts = <62 2>;
 			fsl,mode = "i2s-slave";
 			codec-handle = <&cs4270>;
+			fsl,playback-dma = <&dma00>;
+			fsl,capture-dma = <&dma01>;
 		};
 
 		ssi@16100 {
@@ -233,17 +235,17 @@
 			reg = <0x21300 0x4>; /* DMA general status register */
 			ranges = <0x0 0x21100 0x200>;
 
-			dma-channel@0 {
+			dma00: dma-channel@0 {
 				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,eloplus-dma-channel";
+					"fsl,ssi-dma-channel";
 				cell-index = <0>;
 				reg = <0x0 0x80>;
 				interrupt-parent = <&mpic>;
 				interrupts = <20 2>;
 			};
-			dma-channel@1 {
+			dma01: dma-channel@1 {
 				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,eloplus-dma-channel";
+					"fsl,ssi-dma-channel";
 				cell-index = <1>;
 				reg = <0x80 0x80>;
 				interrupt-parent = <&mpic>;
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 45f789b..0f941f3 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -107,24 +107,28 @@
 			dma-channel@0 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -268,7 +272,8 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 72d15f0..3b295e8 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -246,13 +246,22 @@
 	   		};
 
 			IIC0: i2c@ef600700 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "ibm,iic-440epx", "ibm,iic";
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+
+				hwmon@48 {
+					compatible = "adi,ad7414";
+					reg = <0x48>;
+				};
 			};
 
 			IIC1: i2c@ef600800 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "ibm,iic-440epx", "ibm,iic";
 				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index e39422a..1fa3cb4 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -15,7 +15,7 @@
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,yosemite";
-	compatible = "amcc,yosemite","amcc,bamboo";
+	compatible = "amcc,yosemite";
 	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
diff --git a/arch/powerpc/boot/elf_util.c b/arch/powerpc/boot/elf_util.c
index 7454aa4..1567a0c 100644
--- a/arch/powerpc/boot/elf_util.c
+++ b/arch/powerpc/boot/elf_util.c
@@ -27,7 +27,8 @@ int parse_elf64(void *hdr, struct elf_info *info)
 	      elf64->e_ident[EI_MAG3]  == ELFMAG3	&&
 	      elf64->e_ident[EI_CLASS] == ELFCLASS64	&&
 	      elf64->e_ident[EI_DATA]  == ELFDATA2MSB	&&
-	      elf64->e_type            == ET_EXEC	&&
+	      (elf64->e_type            == ET_EXEC ||
+	       elf64->e_type            == ET_DYN)	&&
 	      elf64->e_machine         == EM_PPC64))
 		return 0;
 
@@ -58,7 +59,8 @@ int parse_elf32(void *hdr, struct elf_info *info)
 	      elf32->e_ident[EI_MAG3]  == ELFMAG3	&&
 	      elf32->e_ident[EI_CLASS] == ELFCLASS32	&&
 	      elf32->e_ident[EI_DATA]  == ELFDATA2MSB	&&
-	      elf32->e_type            == ET_EXEC	&&
+	      (elf32->e_type            == ET_EXEC ||
+	       elf32->e_type            == ET_DYN)      &&
 	      elf32->e_machine         == EM_PPC))
 		return 0;
 
diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c
index c541fd8..9276327 100644
--- a/arch/powerpc/boot/libfdt-wrapper.c
+++ b/arch/powerpc/boot/libfdt-wrapper.c
@@ -105,6 +105,11 @@ static int fdt_wrapper_setprop(const void *devp, const char *name,
 	return check_err(rc);
 }
 
+static int fdt_wrapper_del_node(const void *devp)
+{
+	return fdt_del_node(fdt, devp_offset(devp));
+}
+
 static void *fdt_wrapper_get_parent(const void *devp)
 {
 	return offset_devp(fdt_parent_offset(fdt, devp_offset(devp)));
@@ -165,6 +170,7 @@ static unsigned long fdt_wrapper_finalize(void)
 void fdt_init(void *blob)
 {
 	int err;
+	int bufsize;
 
 	dt_ops.finddevice = fdt_wrapper_finddevice;
 	dt_ops.getprop = fdt_wrapper_getprop;
@@ -173,21 +179,21 @@ void fdt_init(void *blob)
 	dt_ops.create_node = fdt_wrapper_create_node;
 	dt_ops.find_node_by_prop_value = fdt_wrapper_find_node_by_prop_value;
 	dt_ops.find_node_by_compatible = fdt_wrapper_find_node_by_compatible;
+	dt_ops.del_node = fdt_wrapper_del_node;
 	dt_ops.get_path = fdt_wrapper_get_path;
 	dt_ops.finalize = fdt_wrapper_finalize;
 
 	/* Make sure the dt blob is the right version and so forth */
 	fdt = blob;
-	err = fdt_open_into(fdt, fdt, fdt_totalsize(blob));
-	if (err == -FDT_ERR_NOSPACE) {
-		int bufsize = fdt_totalsize(fdt) + 4;
-		buf = malloc(bufsize);
-		err = fdt_open_into(fdt, buf, bufsize);
-	}
+	bufsize = fdt_totalsize(fdt) + 4;
+	buf = malloc(bufsize);
+	if(!buf)
+		fatal("malloc failed. can't relocate the device tree\n\r");
+
+	err = fdt_open_into(fdt, buf, bufsize);
 
 	if (err != 0)
 		fatal("fdt_init(): %s\n\r", fdt_strerror(err));
 
-	if (buf)
-		fdt = buf;
+	fdt = buf;
 }
diff --git a/arch/powerpc/boot/libfdt/Makefile.libfdt b/arch/powerpc/boot/libfdt/Makefile.libfdt
index 82f9c6a..6c42acf 100644
--- a/arch/powerpc/boot/libfdt/Makefile.libfdt
+++ b/arch/powerpc/boot/libfdt/Makefile.libfdt
@@ -3,12 +3,6 @@
 # This is not a complete Makefile of itself.  Instead, it is designed to
 # be easily embeddable into other systems of Makefiles.
 #
-LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
 LIBFDT_INCLUDES = fdt.h libfdt.h
-LIBFDT_EXTRA = libfdt_internal.h
-LIBFDT_LIB = libfdt/libfdt.a
-
+LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
 LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o)
-
-$(LIBFDT_objdir)/$(LIBFDT_LIB): $(addprefix $(LIBFDT_objdir)/,$(LIBFDT_OBJS))
-
diff --git a/arch/powerpc/boot/libfdt/fdt.c b/arch/powerpc/boot/libfdt/fdt.c
index 586a361..2acaec5 100644
--- a/arch/powerpc/boot/libfdt/fdt.c
+++ b/arch/powerpc/boot/libfdt/fdt.c
@@ -63,7 +63,7 @@ int fdt_check_header(const void *fdt)
 			return -FDT_ERR_BADVERSION;
 		if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION)
 			return -FDT_ERR_BADVERSION;
-	} else if (fdt_magic(fdt) == SW_MAGIC) {
+	} else if (fdt_magic(fdt) == FDT_SW_MAGIC) {
 		/* Unfinished sequential-write blob */
 		if (fdt_size_dt_struct(fdt) == 0)
 			return -FDT_ERR_BADSTATE;
@@ -76,7 +76,7 @@ int fdt_check_header(const void *fdt)
 
 const void *fdt_offset_ptr(const void *fdt, int offset, int len)
 {
-	const void *p;
+	const char *p;
 
 	if (fdt_version(fdt) >= 0x11)
 		if (((offset + len) < offset)
@@ -124,11 +124,59 @@ uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset)
 	}
 
 	if (nextoffset)
-		*nextoffset = ALIGN(offset, FDT_TAGSIZE);
+		*nextoffset = FDT_TAGALIGN(offset);
 
 	return tag;
 }
 
+int _fdt_check_node_offset(const void *fdt, int offset)
+{
+	if ((offset < 0) || (offset % FDT_TAGSIZE)
+	    || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE))
+		return -FDT_ERR_BADOFFSET;
+
+	return offset;
+}
+
+int fdt_next_node(const void *fdt, int offset, int *depth)
+{
+	int nextoffset = 0;
+	uint32_t tag;
+
+	if (offset >= 0)
+		if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0)
+			return nextoffset;
+
+	do {
+		offset = nextoffset;
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+		switch (tag) {
+		case FDT_PROP:
+		case FDT_NOP:
+			break;
+
+		case FDT_BEGIN_NODE:
+			if (depth)
+				(*depth)++;
+			break;
+
+		case FDT_END_NODE:
+			if (depth)
+				(*depth)--;
+			break;
+
+		case FDT_END:
+			return -FDT_ERR_NOTFOUND;
+
+		default:
+			return -FDT_ERR_BADSTRUCTURE;
+		}
+	} while (tag != FDT_BEGIN_NODE);
+
+	return offset;
+}
+
 const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
 {
 	int len = strlen(s) + 1;
@@ -136,17 +184,14 @@ const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
 	const char *p;
 
 	for (p = strtab; p <= last; p++)
-		if (memeq(p, s, len))
+		if (memcmp(p, s, len) == 0)
 			return p;
 	return NULL;
 }
 
 int fdt_move(const void *fdt, void *buf, int bufsize)
 {
-	int err = fdt_check_header(fdt);
-
-	if (err)
-		return err;
+	FDT_CHECK_HEADER(fdt);
 
 	if (fdt_totalsize(fdt) > bufsize)
 		return -FDT_ERR_NOSPACE;
diff --git a/arch/powerpc/boot/libfdt/fdt_ro.c b/arch/powerpc/boot/libfdt/fdt_ro.c
index 12a37d5..129b532 100644
--- a/arch/powerpc/boot/libfdt/fdt_ro.c
+++ b/arch/powerpc/boot/libfdt/fdt_ro.c
@@ -55,17 +55,10 @@
 
 #include "libfdt_internal.h"
 
-#define CHECK_HEADER(fdt) \
-	{ \
-		int err; \
-		if ((err = fdt_check_header(fdt)) != 0) \
-			return err; \
-	}
-
-static int nodename_eq(const void *fdt, int offset,
-		       const char *s, int len)
+static int _fdt_nodename_eq(const void *fdt, int offset,
+			    const char *s, int len)
 {
-	const char *p = fdt_offset_ptr(fdt, offset, len+1);
+	const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1);
 
 	if (! p)
 		/* short match */
@@ -84,12 +77,12 @@ static int nodename_eq(const void *fdt, int offset,
 
 const char *fdt_string(const void *fdt, int stroffset)
 {
-	return (char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
+	return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
 }
 
 int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
 {
-	CHECK_HEADER(fdt);
+	FDT_CHECK_HEADER(fdt);
 	*address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address);
 	*size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size);
 	return 0;
@@ -104,50 +97,24 @@ int fdt_num_mem_rsv(const void *fdt)
 	return i;
 }
 
-int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
+int fdt_subnode_offset_namelen(const void *fdt, int offset,
 			       const char *name, int namelen)
 {
-	int level = 0;
-	uint32_t tag;
-	int offset, nextoffset;
-
-	CHECK_HEADER(fdt);
-
-	tag = fdt_next_tag(fdt, parentoffset, &nextoffset);
-	if (tag != FDT_BEGIN_NODE)
-		return -FDT_ERR_BADOFFSET;
-
-	do {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-
-		switch (tag) {
-		case FDT_END:
-			return -FDT_ERR_TRUNCATED;
-
-		case FDT_BEGIN_NODE:
-			level++;
-			if (level != 1)
-				continue;
-			if (nodename_eq(fdt, offset+FDT_TAGSIZE, name, namelen))
-				/* Found it! */
-				return offset;
-			break;
-
-		case FDT_END_NODE:
-			level--;
-			break;
+	int depth;
 
-		case FDT_PROP:
-		case FDT_NOP:
-			break;
+	FDT_CHECK_HEADER(fdt);
 
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
-		}
-	} while (level >= 0);
+	for (depth = 0;
+	     offset >= 0;
+	     offset = fdt_next_node(fdt, offset, &depth)) {
+		if (depth < 0)
+			return -FDT_ERR_NOTFOUND;
+		else if ((depth == 1)
+			 && _fdt_nodename_eq(fdt, offset, name, namelen))
+			return offset;
+	}
 
-	return -FDT_ERR_NOTFOUND;
+	return offset; /* error */
 }
 
 int fdt_subnode_offset(const void *fdt, int parentoffset,
@@ -162,7 +129,7 @@ int fdt_path_offset(const void *fdt, const char *path)
 	const char *p = path;
 	int offset = 0;
 
-	CHECK_HEADER(fdt);
+	FDT_CHECK_HEADER(fdt);
 
 	if (*path != '/')
 		return -FDT_ERR_BADPATH;
@@ -190,16 +157,12 @@ int fdt_path_offset(const void *fdt, const char *path)
 
 const char *fdt_get_name(const void *fdt, int nodeoffset, int *len)
 {
-	const struct fdt_node_header *nh;
+	const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset);
 	int err;
 
-	if ((err = fdt_check_header(fdt)) != 0)
-		goto fail;
-
-	err = -FDT_ERR_BADOFFSET;
-	nh = fdt_offset_ptr(fdt, nodeoffset, sizeof(*nh));
-	if (!nh || (fdt32_to_cpu(nh->tag) != FDT_BEGIN_NODE))
-		goto fail;
+	if (((err = fdt_check_header(fdt)) != 0)
+	    || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
+			goto fail;
 
 	if (len)
 		*len = strlen(nh->name);
@@ -222,17 +185,11 @@ const struct fdt_property *fdt_get_property(const void *fdt,
 	int offset, nextoffset;
 	int err;
 
-	if ((err = fdt_check_header(fdt)) != 0)
-		goto fail;
-
-	err = -FDT_ERR_BADOFFSET;
-	if (nodeoffset % FDT_TAGSIZE)
-		goto fail;
-
-	tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
-	if (tag != FDT_BEGIN_NODE)
-		goto fail;
+	if (((err = fdt_check_header(fdt)) != 0)
+	    || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
+			goto fail;
 
+	nextoffset = err;
 	do {
 		offset = nextoffset;
 
@@ -253,7 +210,7 @@ const struct fdt_property *fdt_get_property(const void *fdt,
 			if (! prop)
 				goto fail;
 			namestroff = fdt32_to_cpu(prop->nameoff);
-			if (streq(fdt_string(fdt, namestroff), name)) {
+			if (strcmp(fdt_string(fdt, namestroff), name) == 0) {
 				/* Found it! */
 				int len = fdt32_to_cpu(prop->len);
 				prop = fdt_offset_ptr(fdt, offset,
@@ -307,115 +264,91 @@ uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
 
 int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 {
-	uint32_t tag;
-	int p = 0, overflow = 0;
-	int offset, nextoffset, namelen;
+	int pdepth = 0, p = 0;
+	int offset, depth, namelen;
 	const char *name;
 
-	CHECK_HEADER(fdt);
-
-	tag = fdt_next_tag(fdt, 0, &nextoffset);
-	if (tag != FDT_BEGIN_NODE)
-		return -FDT_ERR_BADSTRUCTURE;
+	FDT_CHECK_HEADER(fdt);
 
 	if (buflen < 2)
 		return -FDT_ERR_NOSPACE;
-	buf[0] = '/';
-	p = 1;
 
-	while (nextoffset <= nodeoffset) {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-		switch (tag) {
-		case FDT_END:
-			return -FDT_ERR_BADOFFSET;
+	for (offset = 0, depth = 0;
+	     (offset >= 0) && (offset <= nodeoffset);
+	     offset = fdt_next_node(fdt, offset, &depth)) {
+		if (pdepth < depth)
+			continue; /* overflowed buffer */
 
-		case FDT_BEGIN_NODE:
-			name = fdt_get_name(fdt, offset, &namelen);
-			if (!name)
-				return namelen;
-			if (overflow || ((p + namelen + 1) > buflen)) {
-				overflow++;
-				break;
-			}
+		while (pdepth > depth) {
+			do {
+				p--;
+			} while (buf[p-1] != '/');
+			pdepth--;
+		}
+
+		name = fdt_get_name(fdt, offset, &namelen);
+		if (!name)
+			return namelen;
+		if ((p + namelen + 1) <= buflen) {
 			memcpy(buf + p, name, namelen);
 			p += namelen;
 			buf[p++] = '/';
-			break;
-
-		case FDT_END_NODE:
-			if (overflow) {
-				overflow--;
-				break;
-			}
-			do {
-				p--;
-			} while  (buf[p-1] != '/');
-			break;
+			pdepth++;
+		}
 
-		case FDT_PROP:
-		case FDT_NOP:
-			break;
+		if (offset == nodeoffset) {
+			if (pdepth < (depth + 1))
+				return -FDT_ERR_NOSPACE;
 
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
+			if (p > 1) /* special case so that root path is "/", not "" */
+				p--;
+			buf[p] = '\0';
+			return p;
 		}
 	}
 
-	if (overflow)
-		return -FDT_ERR_NOSPACE;
+	if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+		return -FDT_ERR_BADOFFSET;
+	else if (offset == -FDT_ERR_BADOFFSET)
+		return -FDT_ERR_BADSTRUCTURE;
 
-	if (p > 1) /* special case so that root path is "/", not "" */
-		p--;
-	buf[p] = '\0';
-	return p;
+	return offset; /* error from fdt_next_node() */
 }
 
 int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
 				 int supernodedepth, int *nodedepth)
 {
-	int level = -1;
-	uint32_t tag;
-	int offset, nextoffset = 0;
+	int offset, depth;
 	int supernodeoffset = -FDT_ERR_INTERNAL;
 
-	CHECK_HEADER(fdt);
+	FDT_CHECK_HEADER(fdt);
 
 	if (supernodedepth < 0)
 		return -FDT_ERR_NOTFOUND;
 
-	do {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-		switch (tag) {
-		case FDT_END:
-			return -FDT_ERR_BADOFFSET;
-
-		case FDT_BEGIN_NODE:
-			level++;
-			if (level == supernodedepth)
-				supernodeoffset = offset;
-			break;
-
-		case FDT_END_NODE:
-			level--;
-			break;
+	for (offset = 0, depth = 0;
+	     (offset >= 0) && (offset <= nodeoffset);
+	     offset = fdt_next_node(fdt, offset, &depth)) {
+		if (depth == supernodedepth)
+			supernodeoffset = offset;
 
-		case FDT_PROP:
-		case FDT_NOP:
-			break;
+		if (offset == nodeoffset) {
+			if (nodedepth)
+				*nodedepth = depth;
 
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
+			if (supernodedepth > depth)
+				return -FDT_ERR_NOTFOUND;
+			else
+				return supernodeoffset;
 		}
-	} while (offset < nodeoffset);
+	}
 
-	if (nodedepth)
-		*nodedepth = level;
+	if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+		return -FDT_ERR_BADOFFSET;
+	else if (offset == -FDT_ERR_BADOFFSET)
+		return -FDT_ERR_BADSTRUCTURE;
 
-	if (supernodedepth > level)
-		return -FDT_ERR_NOTFOUND;
-	return supernodeoffset;
+	return offset; /* error from fdt_next_node() */
 }
 
 int fdt_node_depth(const void *fdt, int nodeoffset)
@@ -443,51 +376,27 @@ int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
 				  const char *propname,
 				  const void *propval, int proplen)
 {
-	uint32_t tag;
-	int offset, nextoffset;
+	int offset;
 	const void *val;
 	int len;
 
-	CHECK_HEADER(fdt);
-
-	if (startoffset >= 0) {
-		tag = fdt_next_tag(fdt, startoffset, &nextoffset);
-		if (tag != FDT_BEGIN_NODE)
-			return -FDT_ERR_BADOFFSET;
-	} else {
-		nextoffset = 0;
-	}
+	FDT_CHECK_HEADER(fdt);
 
 	/* FIXME: The algorithm here is pretty horrible: we scan each
 	 * property of a node in fdt_getprop(), then if that didn't
 	 * find what we want, we scan over them again making our way
 	 * to the next node.  Still it's the easiest to implement
 	 * approach; performance can come later. */
-	do {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-
-		switch (tag) {
-		case FDT_BEGIN_NODE:
-			val = fdt_getprop(fdt, offset, propname, &len);
-			if (val
-			    && (len == proplen)
-			    && (memcmp(val, propval, len) == 0))
-				return offset;
-			break;
-
-		case FDT_PROP:
-		case FDT_END:
-		case FDT_END_NODE:
-		case FDT_NOP:
-			break;
-
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
-		}
-	} while (tag != FDT_END);
+	for (offset = fdt_next_node(fdt, startoffset, NULL);
+	     offset >= 0;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		val = fdt_getprop(fdt, offset, propname, &len);
+		if (val && (len == proplen)
+		    && (memcmp(val, propval, len) == 0))
+			return offset;
+	}
 
-	return -FDT_ERR_NOTFOUND;
+	return offset; /* error from fdt_next_node() */
 }
 
 int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
@@ -499,10 +408,10 @@ int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
 					     &phandle, sizeof(phandle));
 }
 
-int _stringlist_contains(const void *strlist, int listlen, const char *str)
+int _stringlist_contains(const char *strlist, int listlen, const char *str)
 {
 	int len = strlen(str);
-	const void *p;
+	const char *p;
 
 	while (listlen >= len) {
 		if (memcmp(str, strlist, len+1) == 0)
@@ -534,50 +443,24 @@ int fdt_node_check_compatible(const void *fdt, int nodeoffset,
 int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
 				  const char *compatible)
 {
-	uint32_t tag;
-	int offset, nextoffset;
-	int err;
-
-	CHECK_HEADER(fdt);
+	int offset, err;
 
-	if (startoffset >= 0) {
-		tag = fdt_next_tag(fdt, startoffset, &nextoffset);
-		if (tag != FDT_BEGIN_NODE)
-			return -FDT_ERR_BADOFFSET;
-	} else {
-		nextoffset = 0;
-	}
+	FDT_CHECK_HEADER(fdt);
 
 	/* FIXME: The algorithm here is pretty horrible: we scan each
 	 * property of a node in fdt_node_check_compatible(), then if
 	 * that didn't find what we want, we scan over them again
 	 * making our way to the next node.  Still it's the easiest to
 	 * implement approach; performance can come later. */
-	do {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-
-		switch (tag) {
-		case FDT_BEGIN_NODE:
-			err = fdt_node_check_compatible(fdt, offset,
-							compatible);
-			if ((err < 0)
-			    && (err != -FDT_ERR_NOTFOUND))
-				return err;
-			else if (err == 0)
-				return offset;
-			break;
-
-		case FDT_PROP:
-		case FDT_END:
-		case FDT_END_NODE:
-		case FDT_NOP:
-			break;
-
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
-		}
-	} while (tag != FDT_END);
+	for (offset = fdt_next_node(fdt, startoffset, NULL);
+	     offset >= 0;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		err = fdt_node_check_compatible(fdt, offset, compatible);
+		if ((err < 0) && (err != -FDT_ERR_NOTFOUND))
+			return err;
+		else if (err == 0)
+			return offset;
+	}
 
-	return -FDT_ERR_NOTFOUND;
+	return offset; /* error from fdt_next_node() */
 }
diff --git a/arch/powerpc/boot/libfdt/fdt_rw.c b/arch/powerpc/boot/libfdt/fdt_rw.c
index 6673f8e..8e7ec4c 100644
--- a/arch/powerpc/boot/libfdt/fdt_rw.c
+++ b/arch/powerpc/boot/libfdt/fdt_rw.c
@@ -55,10 +55,10 @@
 
 #include "libfdt_internal.h"
 
-static int _blocks_misordered(const void *fdt,
+static int _fdt_blocks_misordered(const void *fdt,
 			      int mem_rsv_size, int struct_size)
 {
-	return (fdt_off_mem_rsvmap(fdt) < ALIGN(sizeof(struct fdt_header), 8))
+	return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8))
 		|| (fdt_off_dt_struct(fdt) <
 		    (fdt_off_mem_rsvmap(fdt) + mem_rsv_size))
 		|| (fdt_off_dt_strings(fdt) <
@@ -67,16 +67,14 @@ static int _blocks_misordered(const void *fdt,
 		    (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt)));
 }
 
-static int rw_check_header(void *fdt)
+static int _fdt_rw_check_header(void *fdt)
 {
-	int err;
+	FDT_CHECK_HEADER(fdt);
 
-	if ((err = fdt_check_header(fdt)))
-		return err;
 	if (fdt_version(fdt) < 17)
 		return -FDT_ERR_BADVERSION;
-	if (_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
-			       fdt_size_dt_struct(fdt)))
+	if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
+				   fdt_size_dt_struct(fdt)))
 		return -FDT_ERR_BADLAYOUT;
 	if (fdt_version(fdt) > 17)
 		fdt_set_version(fdt, 17);
@@ -84,36 +82,37 @@ static int rw_check_header(void *fdt)
 	return 0;
 }
 
-#define RW_CHECK_HEADER(fdt) \
+#define FDT_RW_CHECK_HEADER(fdt) \
 	{ \
 		int err; \
-		if ((err = rw_check_header(fdt)) != 0) \
+		if ((err = _fdt_rw_check_header(fdt)) != 0) \
 			return err; \
 	}
 
-static inline int _blob_data_size(void *fdt)
+static inline int _fdt_data_size(void *fdt)
 {
 	return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
 }
 
-static int _blob_splice(void *fdt, void *p, int oldlen, int newlen)
+static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen)
 {
-	void *end = fdt + _blob_data_size(fdt);
+	char *p = splicepoint;
+	char *end = (char *)fdt + _fdt_data_size(fdt);
 
 	if (((p + oldlen) < p) || ((p + oldlen) > end))
 		return -FDT_ERR_BADOFFSET;
-	if ((end - oldlen + newlen) > (fdt + fdt_totalsize(fdt)))
+	if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt)))
 		return -FDT_ERR_NOSPACE;
 	memmove(p + newlen, p + oldlen, end - p - oldlen);
 	return 0;
 }
 
-static int _blob_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
-				int oldn, int newn)
+static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
+			       int oldn, int newn)
 {
 	int delta = (newn - oldn) * sizeof(*p);
 	int err;
-	err = _blob_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
+	err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
 	if (err)
 		return err;
 	fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta);
@@ -121,13 +120,13 @@ static int _blob_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
 	return 0;
 }
 
-static int _blob_splice_struct(void *fdt, void *p,
-			       int oldlen, int newlen)
+static int _fdt_splice_struct(void *fdt, void *p,
+			      int oldlen, int newlen)
 {
 	int delta = newlen - oldlen;
 	int err;
 
-	if ((err = _blob_splice(fdt, p, oldlen, newlen)))
+	if ((err = _fdt_splice(fdt, p, oldlen, newlen)))
 		return err;
 
 	fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta);
@@ -135,19 +134,20 @@ static int _blob_splice_struct(void *fdt, void *p,
 	return 0;
 }
 
-static int _blob_splice_string(void *fdt, int newlen)
+static int _fdt_splice_string(void *fdt, int newlen)
 {
-	void *p = fdt + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
+	void *p = (char *)fdt
+		+ fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
 	int err;
 
-	if ((err = _blob_splice(fdt, p, 0, newlen)))
+	if ((err = _fdt_splice(fdt, p, 0, newlen)))
 		return err;
 
 	fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen);
 	return 0;
 }
 
-static int _find_add_string(void *fdt, const char *s)
+static int _fdt_find_add_string(void *fdt, const char *s)
 {
 	char *strtab = (char *)fdt + fdt_off_dt_strings(fdt);
 	const char *p;
@@ -161,7 +161,7 @@ static int _find_add_string(void *fdt, const char *s)
 		return (p - strtab);
 
 	new = strtab + fdt_size_dt_strings(fdt);
-	err = _blob_splice_string(fdt, len);
+	err = _fdt_splice_string(fdt, len);
 	if (err)
 		return err;
 
@@ -174,11 +174,10 @@ int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size)
 	struct fdt_reserve_entry *re;
 	int err;
 
-	if ((err = rw_check_header(fdt)))
-		return err;
+	FDT_RW_CHECK_HEADER(fdt);
 
 	re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt));
-	err = _blob_splice_mem_rsv(fdt, re, 0, 1);
+	err = _fdt_splice_mem_rsv(fdt, re, 0, 1);
 	if (err)
 		return err;
 
@@ -192,19 +191,19 @@ int fdt_del_mem_rsv(void *fdt, int n)
 	struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n);
 	int err;
 
-	if ((err = rw_check_header(fdt)))
-		return err;
+	FDT_RW_CHECK_HEADER(fdt);
+
 	if (n >= fdt_num_mem_rsv(fdt))
 		return -FDT_ERR_NOTFOUND;
 
-	err = _blob_splice_mem_rsv(fdt, re, 1, 0);
+	err = _fdt_splice_mem_rsv(fdt, re, 1, 0);
 	if (err)
 		return err;
 	return 0;
 }
 
-static int _resize_property(void *fdt, int nodeoffset, const char *name, int len,
-			    struct fdt_property **prop)
+static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name,
+				int len, struct fdt_property **prop)
 {
 	int oldlen;
 	int err;
@@ -213,36 +212,33 @@ static int _resize_property(void *fdt, int nodeoffset, const char *name, int len
 	if (! (*prop))
 		return oldlen;
 
-	if ((err = _blob_splice_struct(fdt, (*prop)->data,
-				       ALIGN(oldlen, FDT_TAGSIZE),
-				       ALIGN(len, FDT_TAGSIZE))))
+	if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen),
+				      FDT_TAGALIGN(len))))
 		return err;
 
 	(*prop)->len = cpu_to_fdt32(len);
 	return 0;
 }
 
-static int _add_property(void *fdt, int nodeoffset, const char *name, int len,
-			 struct fdt_property **prop)
+static int _fdt_add_property(void *fdt, int nodeoffset, const char *name,
+			     int len, struct fdt_property **prop)
 {
-	uint32_t tag;
 	int proplen;
 	int nextoffset;
 	int namestroff;
 	int err;
 
-	tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
-	if (tag != FDT_BEGIN_NODE)
-		return -FDT_ERR_BADOFFSET;
+	if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0)
+		return nextoffset;
 
-	namestroff = _find_add_string(fdt, name);
+	namestroff = _fdt_find_add_string(fdt, name);
 	if (namestroff < 0)
 		return namestroff;
 
 	*prop = _fdt_offset_ptr_w(fdt, nextoffset);
-	proplen = sizeof(**prop) + ALIGN(len, FDT_TAGSIZE);
+	proplen = sizeof(**prop) + FDT_TAGALIGN(len);
 
-	err = _blob_splice_struct(fdt, *prop, 0, proplen);
+	err = _fdt_splice_struct(fdt, *prop, 0, proplen);
 	if (err)
 		return err;
 
@@ -252,18 +248,40 @@ static int _add_property(void *fdt, int nodeoffset, const char *name, int len,
 	return 0;
 }
 
+int fdt_set_name(void *fdt, int nodeoffset, const char *name)
+{
+	char *namep;
+	int oldlen, newlen;
+	int err;
+
+	FDT_RW_CHECK_HEADER(fdt);
+
+	namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen);
+	if (!namep)
+		return oldlen;
+
+	newlen = strlen(name);
+
+	err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1),
+				 FDT_TAGALIGN(newlen+1));
+	if (err)
+		return err;
+
+	memcpy(namep, name, newlen+1);
+	return 0;
+}
+
 int fdt_setprop(void *fdt, int nodeoffset, const char *name,
 		const void *val, int len)
 {
 	struct fdt_property *prop;
 	int err;
 
-	if ((err = rw_check_header(fdt)))
-		return err;
+	FDT_RW_CHECK_HEADER(fdt);
 
-	err = _resize_property(fdt, nodeoffset, name, len, &prop);
+	err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop);
 	if (err == -FDT_ERR_NOTFOUND)
-		err = _add_property(fdt, nodeoffset, name, len, &prop);
+		err = _fdt_add_property(fdt, nodeoffset, name, len, &prop);
 	if (err)
 		return err;
 
@@ -276,14 +294,14 @@ int fdt_delprop(void *fdt, int nodeoffset, const char *name)
 	struct fdt_property *prop;
 	int len, proplen;
 
-	RW_CHECK_HEADER(fdt);
+	FDT_RW_CHECK_HEADER(fdt);
 
 	prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
 	if (! prop)
 		return len;
 
-	proplen = sizeof(*prop) + ALIGN(len, FDT_TAGSIZE);
-	return _blob_splice_struct(fdt, prop, proplen, 0);
+	proplen = sizeof(*prop) + FDT_TAGALIGN(len);
+	return _fdt_splice_struct(fdt, prop, proplen, 0);
 }
 
 int fdt_add_subnode_namelen(void *fdt, int parentoffset,
@@ -296,7 +314,7 @@ int fdt_add_subnode_namelen(void *fdt, int parentoffset,
 	uint32_t tag;
 	uint32_t *endtag;
 
-	RW_CHECK_HEADER(fdt);
+	FDT_RW_CHECK_HEADER(fdt);
 
 	offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen);
 	if (offset >= 0)
@@ -309,19 +327,19 @@ int fdt_add_subnode_namelen(void *fdt, int parentoffset,
 	do {
 		offset = nextoffset;
 		tag = fdt_next_tag(fdt, offset, &nextoffset);
-	} while (tag == FDT_PROP);
+	} while ((tag == FDT_PROP) || (tag == FDT_NOP));
 
 	nh = _fdt_offset_ptr_w(fdt, offset);
-	nodelen = sizeof(*nh) + ALIGN(namelen+1, FDT_TAGSIZE) + FDT_TAGSIZE;
+	nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE;
 
-	err = _blob_splice_struct(fdt, nh, 0, nodelen);
+	err = _fdt_splice_struct(fdt, nh, 0, nodelen);
 	if (err)
 		return err;
 
 	nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
-	memset(nh->name, 0, ALIGN(namelen+1, FDT_TAGSIZE));
+	memset(nh->name, 0, FDT_TAGALIGN(namelen+1));
 	memcpy(nh->name, name, namelen);
-	endtag = (uint32_t *)((void *)nh + nodelen - FDT_TAGSIZE);
+	endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE);
 	*endtag = cpu_to_fdt32(FDT_END_NODE);
 
 	return offset;
@@ -336,36 +354,36 @@ int fdt_del_node(void *fdt, int nodeoffset)
 {
 	int endoffset;
 
-	RW_CHECK_HEADER(fdt);
+	FDT_RW_CHECK_HEADER(fdt);
 
 	endoffset = _fdt_node_end_offset(fdt, nodeoffset);
 	if (endoffset < 0)
 		return endoffset;
 
-	return _blob_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset),
-				   endoffset - nodeoffset, 0);
+	return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset),
+				  endoffset - nodeoffset, 0);
 }
 
-static void _packblocks(const void *fdt, void *buf,
-		       int mem_rsv_size, int struct_size)
+static void _fdt_packblocks(const char *old, char *new,
+			    int mem_rsv_size, int struct_size)
 {
 	int mem_rsv_off, struct_off, strings_off;
 
-	mem_rsv_off = ALIGN(sizeof(struct fdt_header), 8);
+	mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8);
 	struct_off = mem_rsv_off + mem_rsv_size;
 	strings_off = struct_off + struct_size;
 
-	memmove(buf + mem_rsv_off, fdt + fdt_off_mem_rsvmap(fdt), mem_rsv_size);
-	fdt_set_off_mem_rsvmap(buf, mem_rsv_off);
+	memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size);
+	fdt_set_off_mem_rsvmap(new, mem_rsv_off);
 
-	memmove(buf + struct_off, fdt + fdt_off_dt_struct(fdt), struct_size);
-	fdt_set_off_dt_struct(buf, struct_off);
-	fdt_set_size_dt_struct(buf, struct_size);
+	memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size);
+	fdt_set_off_dt_struct(new, struct_off);
+	fdt_set_size_dt_struct(new, struct_size);
 
-	memmove(buf + strings_off, fdt + fdt_off_dt_strings(fdt),
-		fdt_size_dt_strings(fdt));
-	fdt_set_off_dt_strings(buf, strings_off);
-	fdt_set_size_dt_strings(buf, fdt_size_dt_strings(fdt));
+	memmove(new + strings_off, old + fdt_off_dt_strings(old),
+		fdt_size_dt_strings(old));
+	fdt_set_off_dt_strings(new, strings_off);
+	fdt_set_size_dt_strings(new, fdt_size_dt_strings(old));
 }
 
 int fdt_open_into(const void *fdt, void *buf, int bufsize)
@@ -373,11 +391,11 @@ int fdt_open_into(const void *fdt, void *buf, int bufsize)
 	int err;
 	int mem_rsv_size, struct_size;
 	int newsize;
-	void *tmp;
+	const char *fdtstart = fdt;
+	const char *fdtend = fdtstart + fdt_totalsize(fdt);
+	char *tmp;
 
-	err = fdt_check_header(fdt);
-	if (err)
-		return err;
+	FDT_CHECK_HEADER(fdt);
 
 	mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
 		* sizeof(struct fdt_reserve_entry);
@@ -390,7 +408,7 @@ int fdt_open_into(const void *fdt, void *buf, int bufsize)
 			;
 	}
 
-	if (!_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
+	if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
 		/* no further work necessary */
 		err = fdt_move(fdt, buf, bufsize);
 		if (err)
@@ -402,22 +420,23 @@ int fdt_open_into(const void *fdt, void *buf, int bufsize)
 	}
 
 	/* Need to reorder */
-	newsize = ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
+	newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
 		+ struct_size + fdt_size_dt_strings(fdt);
 
 	if (bufsize < newsize)
 		return -FDT_ERR_NOSPACE;
 
-	if (((buf + newsize) <= fdt)
-	    || (buf >= (fdt + fdt_totalsize(fdt)))) {
-		tmp = buf;
-	} else {
-		tmp = (void *)fdt + fdt_totalsize(fdt);
-		if ((tmp + newsize) > (buf + bufsize))
+	/* First attempt to build converted tree at beginning of buffer */
+	tmp = buf;
+	/* But if that overlaps with the old tree... */
+	if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) {
+		/* Try right after the old tree instead */
+		tmp = (char *)(uintptr_t)fdtend;
+		if ((tmp + newsize) > ((char *)buf + bufsize))
 			return -FDT_ERR_NOSPACE;
 	}
 
-	_packblocks(fdt, tmp, mem_rsv_size, struct_size);
+	_fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size);
 	memmove(buf, tmp, newsize);
 
 	fdt_set_magic(buf, FDT_MAGIC);
@@ -432,16 +451,13 @@ int fdt_open_into(const void *fdt, void *buf, int bufsize)
 int fdt_pack(void *fdt)
 {
 	int mem_rsv_size;
-	int err;
 
-	err = rw_check_header(fdt);
-	if (err)
-		return err;
+	FDT_RW_CHECK_HEADER(fdt);
 
 	mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
 		* sizeof(struct fdt_reserve_entry);
-	_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
-	fdt_set_totalsize(fdt, _blob_data_size(fdt));
+	_fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
+	fdt_set_totalsize(fdt, _fdt_data_size(fdt));
 
 	return 0;
 }
diff --git a/arch/powerpc/boot/libfdt/fdt_strerror.c b/arch/powerpc/boot/libfdt/fdt_strerror.c
index f9d32ef..e6c3cee 100644
--- a/arch/powerpc/boot/libfdt/fdt_strerror.c
+++ b/arch/powerpc/boot/libfdt/fdt_strerror.c
@@ -55,29 +55,29 @@
 
 #include "libfdt_internal.h"
 
-struct errtabent {
+struct fdt_errtabent {
 	const char *str;
 };
 
-#define ERRTABENT(val) \
+#define FDT_ERRTABENT(val) \
 	[(val)] = { .str = #val, }
 
-static struct errtabent errtable[] = {
-	ERRTABENT(FDT_ERR_NOTFOUND),
-	ERRTABENT(FDT_ERR_EXISTS),
-	ERRTABENT(FDT_ERR_NOSPACE),
+static struct fdt_errtabent fdt_errtable[] = {
+	FDT_ERRTABENT(FDT_ERR_NOTFOUND),
+	FDT_ERRTABENT(FDT_ERR_EXISTS),
+	FDT_ERRTABENT(FDT_ERR_NOSPACE),
 
-	ERRTABENT(FDT_ERR_BADOFFSET),
-	ERRTABENT(FDT_ERR_BADPATH),
-	ERRTABENT(FDT_ERR_BADSTATE),
+	FDT_ERRTABENT(FDT_ERR_BADOFFSET),
+	FDT_ERRTABENT(FDT_ERR_BADPATH),
+	FDT_ERRTABENT(FDT_ERR_BADSTATE),
 
-	ERRTABENT(FDT_ERR_TRUNCATED),
-	ERRTABENT(FDT_ERR_BADMAGIC),
-	ERRTABENT(FDT_ERR_BADVERSION),
-	ERRTABENT(FDT_ERR_BADSTRUCTURE),
-	ERRTABENT(FDT_ERR_BADLAYOUT),
+	FDT_ERRTABENT(FDT_ERR_TRUNCATED),
+	FDT_ERRTABENT(FDT_ERR_BADMAGIC),
+	FDT_ERRTABENT(FDT_ERR_BADVERSION),
+	FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE),
+	FDT_ERRTABENT(FDT_ERR_BADLAYOUT),
 };
-#define ERRTABSIZE	(sizeof(errtable) / sizeof(errtable[0]))
+#define FDT_ERRTABSIZE	(sizeof(fdt_errtable) / sizeof(fdt_errtable[0]))
 
 const char *fdt_strerror(int errval)
 {
@@ -85,8 +85,8 @@ const char *fdt_strerror(int errval)
 		return "<valid offset/length>";
 	else if (errval == 0)
 		return "<no error>";
-	else if (errval > -ERRTABSIZE) {
-		const char *s = errtable[-errval].str;
+	else if (errval > -FDT_ERRTABSIZE) {
+		const char *s = fdt_errtable[-errval].str;
 
 		if (s)
 			return s;
diff --git a/arch/powerpc/boot/libfdt/fdt_sw.c b/arch/powerpc/boot/libfdt/fdt_sw.c
index dda2de3..698329e 100644
--- a/arch/powerpc/boot/libfdt/fdt_sw.c
+++ b/arch/powerpc/boot/libfdt/fdt_sw.c
@@ -55,14 +55,22 @@
 
 #include "libfdt_internal.h"
 
-static int check_header_sw(void *fdt)
+static int _fdt_sw_check_header(void *fdt)
 {
-	if (fdt_magic(fdt) != SW_MAGIC)
+	if (fdt_magic(fdt) != FDT_SW_MAGIC)
 		return -FDT_ERR_BADMAGIC;
+	/* FIXME: should check more details about the header state */
 	return 0;
 }
 
-static void *grab_space(void *fdt, int len)
+#define FDT_SW_CHECK_HEADER(fdt) \
+	{ \
+		int err; \
+		if ((err = _fdt_sw_check_header(fdt)) != 0) \
+			return err; \
+	}
+
+static void *_fdt_grab_space(void *fdt, int len)
 {
 	int offset = fdt_size_dt_struct(fdt);
 	int spaceleft;
@@ -86,13 +94,13 @@ int fdt_create(void *buf, int bufsize)
 
 	memset(buf, 0, bufsize);
 
-	fdt_set_magic(fdt, SW_MAGIC);
+	fdt_set_magic(fdt, FDT_SW_MAGIC);
 	fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION);
 	fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION);
 	fdt_set_totalsize(fdt,  bufsize);
 
-	fdt_set_off_mem_rsvmap(fdt, ALIGN(sizeof(struct fdt_header),
-					  sizeof(struct fdt_reserve_entry)));
+	fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header),
+					      sizeof(struct fdt_reserve_entry)));
 	fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt));
 	fdt_set_off_dt_strings(fdt, bufsize);
 
@@ -102,11 +110,10 @@ int fdt_create(void *buf, int bufsize)
 int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
 {
 	struct fdt_reserve_entry *re;
-	int err = check_header_sw(fdt);
 	int offset;
 
-	if (err)
-		return err;
+	FDT_SW_CHECK_HEADER(fdt);
+
 	if (fdt_size_dt_struct(fdt))
 		return -FDT_ERR_BADSTATE;
 
@@ -114,7 +121,7 @@ int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
 	if ((offset + sizeof(*re)) > fdt_totalsize(fdt))
 		return -FDT_ERR_NOSPACE;
 
-	re = (struct fdt_reserve_entry *)(fdt + offset);
+	re = (struct fdt_reserve_entry *)((char *)fdt + offset);
 	re->address = cpu_to_fdt64(addr);
 	re->size = cpu_to_fdt64(size);
 
@@ -131,13 +138,11 @@ int fdt_finish_reservemap(void *fdt)
 int fdt_begin_node(void *fdt, const char *name)
 {
 	struct fdt_node_header *nh;
-	int err = check_header_sw(fdt);
 	int namelen = strlen(name) + 1;
 
-	if (err)
-		return err;
+	FDT_SW_CHECK_HEADER(fdt);
 
-	nh = grab_space(fdt, sizeof(*nh) + ALIGN(namelen, FDT_TAGSIZE));
+	nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen));
 	if (! nh)
 		return -FDT_ERR_NOSPACE;
 
@@ -149,12 +154,10 @@ int fdt_begin_node(void *fdt, const char *name)
 int fdt_end_node(void *fdt)
 {
 	uint32_t *en;
-	int err = check_header_sw(fdt);
 
-	if (err)
-		return err;
+	FDT_SW_CHECK_HEADER(fdt);
 
-	en = grab_space(fdt, FDT_TAGSIZE);
+	en = _fdt_grab_space(fdt, FDT_TAGSIZE);
 	if (! en)
 		return -FDT_ERR_NOSPACE;
 
@@ -162,7 +165,7 @@ int fdt_end_node(void *fdt)
 	return 0;
 }
 
-static int find_add_string(void *fdt, const char *s)
+static int _fdt_find_add_string(void *fdt, const char *s)
 {
 	char *strtab = (char *)fdt + fdt_totalsize(fdt);
 	const char *p;
@@ -188,17 +191,15 @@ static int find_add_string(void *fdt, const char *s)
 int fdt_property(void *fdt, const char *name, const void *val, int len)
 {
 	struct fdt_property *prop;
-	int err = check_header_sw(fdt);
 	int nameoff;
 
-	if (err)
-		return err;
+	FDT_SW_CHECK_HEADER(fdt);
 
-	nameoff = find_add_string(fdt, name);
+	nameoff = _fdt_find_add_string(fdt, name);
 	if (nameoff == 0)
 		return -FDT_ERR_NOSPACE;
 
-	prop = grab_space(fdt, sizeof(*prop) + ALIGN(len, FDT_TAGSIZE));
+	prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len));
 	if (! prop)
 		return -FDT_ERR_NOSPACE;
 
@@ -211,18 +212,16 @@ int fdt_property(void *fdt, const char *name, const void *val, int len)
 
 int fdt_finish(void *fdt)
 {
-	int err = check_header_sw(fdt);
 	char *p = (char *)fdt;
 	uint32_t *end;
 	int oldstroffset, newstroffset;
 	uint32_t tag;
 	int offset, nextoffset;
 
-	if (err)
-		return err;
+	FDT_SW_CHECK_HEADER(fdt);
 
 	/* Add terminator */
-	end = grab_space(fdt, sizeof(*end));
+	end = _fdt_grab_space(fdt, sizeof(*end));
 	if (! end)
 		return -FDT_ERR_NOSPACE;
 	*end = cpu_to_fdt32(FDT_END);
diff --git a/arch/powerpc/boot/libfdt/fdt_wip.c b/arch/powerpc/boot/libfdt/fdt_wip.c
index 88e24b8..a4652c6 100644
--- a/arch/powerpc/boot/libfdt/fdt_wip.c
+++ b/arch/powerpc/boot/libfdt/fdt_wip.c
@@ -72,11 +72,11 @@ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
 	return 0;
 }
 
-static void nop_region(void *start, int len)
+static void _fdt_nop_region(void *start, int len)
 {
 	uint32_t *p;
 
-	for (p = start; (void *)p < (start + len); p++)
+	for (p = start; (char *)p < ((char *)start + len); p++)
 		*p = cpu_to_fdt32(FDT_NOP);
 }
 
@@ -89,7 +89,7 @@ int fdt_nop_property(void *fdt, int nodeoffset, const char *name)
 	if (! prop)
 		return len;
 
-	nop_region(prop, len + sizeof(*prop));
+	_fdt_nop_region(prop, len + sizeof(*prop));
 
 	return 0;
 }
@@ -139,6 +139,7 @@ int fdt_nop_node(void *fdt, int nodeoffset)
 	if (endoffset < 0)
 		return endoffset;
 
-	nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), endoffset - nodeoffset);
+	_fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0),
+			endoffset - nodeoffset);
 	return 0;
 }
diff --git a/arch/powerpc/boot/libfdt/libfdt.h b/arch/powerpc/boot/libfdt/libfdt.h
index 6b2fb92..ce80e4f 100644
--- a/arch/powerpc/boot/libfdt/libfdt.h
+++ b/arch/powerpc/boot/libfdt/libfdt.h
@@ -125,12 +125,18 @@
 const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
 static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
 {
-	return (void *)fdt_offset_ptr(fdt, offset, checklen);
+	return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
 }
 
 uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
 
 /**********************************************************************/
+/* Traversal functions                                                */
+/**********************************************************************/
+
+int fdt_next_node(const void *fdt, int offset, int *depth);
+
+/**********************************************************************/
 /* General functions                                                  */
 /**********************************************************************/
 
@@ -207,7 +213,7 @@ int fdt_move(const void *fdt, void *buf, int bufsize);
 /**********************************************************************/
 
 /**
- * fdt_string - retreive a string from the strings block of a device tree
+ * fdt_string - retrieve a string from the strings block of a device tree
  * @fdt: pointer to the device tree blob
  * @stroffset: offset of the string within the strings block (native endian)
  *
@@ -221,7 +227,7 @@ int fdt_move(const void *fdt, void *buf, int bufsize);
 const char *fdt_string(const void *fdt, int stroffset);
 
 /**
- * fdt_num_mem_rsv - retreive the number of memory reserve map entries
+ * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
  * @fdt: pointer to the device tree blob
  *
  * Returns the number of entries in the device tree blob's memory
@@ -234,7 +240,7 @@ const char *fdt_string(const void *fdt, int stroffset);
 int fdt_num_mem_rsv(const void *fdt);
 
 /**
- * fdt_get_mem_rsv - retreive one memory reserve map entry
+ * fdt_get_mem_rsv - retrieve one memory reserve map entry
  * @fdt: pointer to the device tree blob
  * @address, @size: pointers to 64-bit variables
  *
@@ -314,7 +320,7 @@ int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
 int fdt_path_offset(const void *fdt, const char *path);
 
 /**
- * fdt_get_name - retreive the name of a given node
+ * fdt_get_name - retrieve the name of a given node
  * @fdt: pointer to the device tree blob
  * @nodeoffset: structure block offset of the starting node
  * @lenp: pointer to an integer variable (will be overwritten) or NULL
@@ -346,7 +352,7 @@ const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
  * fdt_get_property() retrieves a pointer to the fdt_property
  * structure within the device tree blob corresponding to the property
  * named 'name' of the node at offset nodeoffset.  If lenp is
- * non-NULL, the length of the property value also returned, in the
+ * non-NULL, the length of the property value is also returned, in the
  * integer pointed to by lenp.
  *
  * returns:
@@ -369,8 +375,8 @@ static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
 						      const char *name,
 						      int *lenp)
 {
-	return (struct fdt_property *)fdt_get_property(fdt, nodeoffset,
-						       name, lenp);
+	return (struct fdt_property *)(uintptr_t)
+		fdt_get_property(fdt, nodeoffset, name, lenp);
 }
 
 /**
@@ -383,7 +389,7 @@ static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
  * fdt_getprop() retrieves a pointer to the value of the property
  * named 'name' of the node at offset nodeoffset (this will be a
  * pointer to within the device blob itself, not a copy of the value).
- * If lenp is non-NULL, the length of the property value also
+ * If lenp is non-NULL, the length of the property value is also
  * returned, in the integer pointed to by lenp.
  *
  * returns:
@@ -405,11 +411,11 @@ const void *fdt_getprop(const void *fdt, int nodeoffset,
 static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
 				  const char *name, int *lenp)
 {
-	return (void *)fdt_getprop(fdt, nodeoffset, name, lenp);
+	return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
 }
 
 /**
- * fdt_get_phandle - retreive the phandle of a given node
+ * fdt_get_phandle - retrieve the phandle of a given node
  * @fdt: pointer to the device tree blob
  * @nodeoffset: structure block offset of the node
  *
@@ -417,7 +423,7 @@ static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
  * structure block offset nodeoffset.
  *
  * returns:
- *	the phandle of the node at nodeoffset, on succes (!= 0, != -1)
+ *	the phandle of the node at nodeoffset, on success (!= 0, != -1)
  *	0, if the node has no phandle, or another error occurs
  */
 uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
@@ -516,7 +522,7 @@ int fdt_node_depth(const void *fdt, int nodeoffset);
  * structure from the start to nodeoffset, *twice*.
  *
  * returns:
- *	stucture block offset of the parent of the node at nodeoffset
+ *	structure block offset of the parent of the node at nodeoffset
  *		(>=0), on success
  * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
  *	-FDT_ERR_BADMAGIC,
@@ -573,7 +579,7 @@ int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
  * @fdt: pointer to the device tree blob
  * @phandle: phandle value
  *
- * fdt_node_offset_by_prop_value() returns the offset of the node
+ * fdt_node_offset_by_phandle() returns the offset of the node
  * which has the given phandle value.  If there is more than one node
  * in the tree with the given phandle (an invalid tree), results are
  * undefined.
@@ -655,8 +661,65 @@ int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
 /* Write-in-place functions                                           */
 /**********************************************************************/
 
+/**
+ * fdt_setprop_inplace - change a property's value, but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * fdt_setprop_inplace() replaces the value of a given property with
+ * the data in val, of length len.  This function cannot change the
+ * size of a property, and so will only work if len is equal to the
+ * current length of the property.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, if len is not equal to the property's current length
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
 			const void *val, int len);
+
+/**
+ * fdt_setprop_inplace_cell - change the value of a single-cell property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: cell (32-bit integer) value to replace the property with
+ *
+ * fdt_setprop_inplace_cell() replaces the value of a given property
+ * with the 32-bit integer cell value in val, converting val to
+ * big-endian if necessary.  This function cannot change the size of a
+ * property, and so will only work if the property already exists and
+ * has length 4.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, if the property's length is not equal to 4
+  *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
 					   const char *name, uint32_t val)
 {
@@ -664,7 +727,54 @@ static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
 	return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
 }
 
+/**
+ * fdt_nop_property - replace a property with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_nop_property() will replace a given property's representation
+ * in the blob with FDT_NOP tags, effectively removing it from the
+ * tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the property, and will not alter or move any other part of the
+ * tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_nop_node - replace a node (subtree) with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_nop_node() will replace a given node's representation in the
+ * blob, including all its subnodes, if any, with FDT_NOP tags,
+ * effectively removing it from the tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the node and its properties and subnodes, and will not alter or
+ * move any other part of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_nop_node(void *fdt, int nodeoffset);
 
 /**********************************************************************/
@@ -693,23 +803,268 @@ int fdt_finish(void *fdt);
 int fdt_open_into(const void *fdt, void *buf, int bufsize);
 int fdt_pack(void *fdt);
 
+/**
+ * fdt_add_mem_rsv - add one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: 64-bit values (native endian)
+ *
+ * Adds a reserve map entry to the given blob reserving a region at
+ * address address of length size.
+ *
+ * This function will insert data into the reserve map and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new reservation entry
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
+
+/**
+ * fdt_del_mem_rsv - remove a memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @n: entry to remove
+ *
+ * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
+ * the blob.
+ *
+ * This function will delete data from the reservation table and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
+ *		are less than n+1 reserve map entries)
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_del_mem_rsv(void *fdt, int n);
 
+/**
+ * fdt_set_name - change the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of a node
+ * @name: name to give the node
+ *
+ * fdt_set_name() replaces the name (including unit address, if any)
+ * of the given node with the given string.  NOTE: this function can't
+ * efficiently check if the new name is unique amongst the given
+ * node's siblings; results are undefined if this function is invoked
+ * with a name equal to one of the given node's siblings.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob
+ *		to contain the new name
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_set_name(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_setprop - create or change a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to set the property value to
+ * @len: length of the property value
+ *
+ * fdt_setprop() sets the value of the named property in the given
+ * node to the given value and length, creating the property if it
+ * does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_setprop(void *fdt, int nodeoffset, const char *name,
 		const void *val, int len);
+
+/**
+ * fdt_setprop_cell - set a property to a single cell value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_cell() sets the value of the named property in the
+ * given node to the given cell value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
 				   uint32_t val)
 {
 	val = cpu_to_fdt32(val);
 	return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
 }
+
+/**
+ * fdt_setprop_string - set a property to a string value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value for the property
+ *
+ * fdt_setprop_string() sets the value of the named property in the
+ * given node to the given string value (using the length of the
+ * string to determine the new length of the property), or creates a
+ * new property with that value if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 #define fdt_setprop_string(fdt, nodeoffset, name, str) \
 	fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+/**
+ * fdt_delprop - delete a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_del_property() will delete the given property.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_delprop(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_add_subnode_namelen - creates a new node based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_add_subnode(), but use only the first namelen
+ * characters of name as the name of the new node.  This is useful for
+ * creating subnodes based on a portion of a larger string, such as a
+ * full path.
+ */
 int fdt_add_subnode_namelen(void *fdt, int parentoffset,
 			    const char *name, int namelen);
+
+/**
+ * fdt_add_subnode - creates a new node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_add_subnode() creates a new node as a subnode of the node at
+ * structure block offset parentoffset, with the given name (which
+ * should include the unit address, if any).
+ *
+ * This function will insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+
+ * returns:
+ *	structure block offset of the created nodeequested subnode (>=0), on success
+ *	-FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ *	-FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
+ *		the given name
+ *	-FDT_ERR_NOSPACE, if there is insufficient free space in the
+ *		blob to contain the new node
+ *	-FDT_ERR_NOSPACE
+ *	-FDT_ERR_BADLAYOUT
+ *      -FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings.
+ */
 int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_del_node - delete a node (subtree)
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_del_node() will remove the given node, including all its
+ * subnodes if any, from the blob.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_del_node(void *fdt, int nodeoffset);
 
 /**********************************************************************/
diff --git a/arch/powerpc/boot/libfdt/libfdt_internal.h b/arch/powerpc/boot/libfdt/libfdt_internal.h
index 1e60936..46eb93e 100644
--- a/arch/powerpc/boot/libfdt/libfdt_internal.h
+++ b/arch/powerpc/boot/libfdt/libfdt_internal.h
@@ -52,38 +52,44 @@
  */
 #include <fdt.h>
 
-#define ALIGN(x, a)	(((x) + (a) - 1) & ~((a) - 1))
-#define PALIGN(p, a)	((void *)ALIGN((unsigned long)(p), (a)))
+#define FDT_ALIGN(x, a)		(((x) + (a) - 1) & ~((a) - 1))
+#define FDT_TAGALIGN(x)		(FDT_ALIGN((x), FDT_TAGSIZE))
 
-#define memeq(p, q, n)	(memcmp((p), (q), (n)) == 0)
-#define streq(p, q)	(strcmp((p), (q)) == 0)
+#define FDT_CHECK_HEADER(fdt) \
+	{ \
+		int err; \
+		if ((err = fdt_check_header(fdt)) != 0) \
+			return err; \
+	}
 
 uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset);
+int _fdt_check_node_offset(const void *fdt, int offset);
 const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
 int _fdt_node_end_offset(void *fdt, int nodeoffset);
 
 static inline const void *_fdt_offset_ptr(const void *fdt, int offset)
 {
-	return fdt + fdt_off_dt_struct(fdt) + offset;
+	return (const char *)fdt + fdt_off_dt_struct(fdt) + offset;
 }
 
 static inline void *_fdt_offset_ptr_w(void *fdt, int offset)
 {
-	return (void *)_fdt_offset_ptr(fdt, offset);
+	return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset);
 }
 
 static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n)
 {
 	const struct fdt_reserve_entry *rsv_table =
-		fdt + fdt_off_mem_rsvmap(fdt);
+		(const struct fdt_reserve_entry *)
+		((const char *)fdt + fdt_off_mem_rsvmap(fdt));
 
 	return rsv_table + n;
 }
 static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n)
 {
-	return (void *)_fdt_mem_rsv(fdt, n);
+	return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n);
 }
 
-#define SW_MAGIC		(~FDT_MAGIC)
+#define FDT_SW_MAGIC		(~FDT_MAGIC)
 
 #endif /* _LIBFDT_INTERNAL_H */
diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h
index a4b0fc9..c89fdb1 100644
--- a/arch/powerpc/boot/libfdt_env.h
+++ b/arch/powerpc/boot/libfdt_env.h
@@ -6,6 +6,7 @@
 
 typedef u32 uint32_t;
 typedef u64 uint64_t;
+typedef unsigned long uintptr_t;
 
 #define fdt16_to_cpu(x)		(x)
 #define cpu_to_fdt16(x)		(x)
diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c
index 9e7f3dd..ae32801 100644
--- a/arch/powerpc/boot/main.c
+++ b/arch/powerpc/boot/main.c
@@ -56,9 +56,19 @@ static struct addr_range prep_kernel(void)
 	if (platform_ops.vmlinux_alloc) {
 		addr = platform_ops.vmlinux_alloc(ei.memsize);
 	} else {
-		if ((unsigned long)_start < ei.memsize)
+		/*
+		 * Check if the kernel image (without bss) would overwrite the
+		 * bootwrapper. The device tree has been moved in fdt_init()
+		 * to an area allocated with malloc() (somewhere past _end).
+		 */
+		if ((unsigned long)_start < ei.loadsize)
 			fatal("Insufficient memory for kernel at address 0!"
-			       " (_start=%p)\n\r", _start);
+			       " (_start=%p, uncomressed size=%08x)\n\r",
+			       _start, ei.loadsize);
+
+		if ((unsigned long)_end < ei.memsize)
+			fatal("The final kernel image would overwrite the "
+					"device tree\n\r");
 	}
 
 	/* Finally, gunzip the kernel */
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index 321e2f5..b3218ce 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -40,6 +40,7 @@ struct dt_ops {
 			const int buflen);
 	int	(*setprop)(const void *phandle, const char *name,
 			const void *buf, const int buflen);
+	int (*del_node)(const void *phandle);
 	void *(*get_parent)(const void *phandle);
 	/* The node must not already exist. */
 	void *(*create_node)(const void *parent, const char *name);
@@ -126,6 +127,11 @@ static inline int setprop_str(void *devp, const char *name, const char *buf)
 	return -1;
 }
 
+static inline int del_node(const void *devp)
+{
+	return dt_ops.del_node ? dt_ops.del_node(devp) : -1;
+}
+
 static inline void *get_parent(const char *devp)
 {
 	return dt_ops.get_parent ? dt_ops.get_parent(devp) : NULL;
diff --git a/arch/powerpc/boot/string.S b/arch/powerpc/boot/string.S
index 643e4cb..acc9428 100644
--- a/arch/powerpc/boot/string.S
+++ b/arch/powerpc/boot/string.S
@@ -235,7 +235,7 @@ memchr:
 	.globl	memcmp
 memcmp:
 	cmpwi	0,r5,0
-	blelr
+	ble	2f
 	mtctr	r5
 	addi	r6,r3,-1
 	addi	r4,r4,-1
@@ -244,6 +244,8 @@ memcmp:
 	subf.	r3,r0,r3
 	bdnzt	2,1b
 	blr
+2:	li	r3,0
+	blr
 
 
 /*
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 965c237..f390735 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -306,8 +306,13 @@ fi
 
 # post-processing needed for some platforms
 case "$platform" in
-pseries|chrp)
-    $objbin/addnote "$ofile"
+pseries)
+    ${CROSS}objcopy -O binary -j .fakeelf "$kernel" "$ofile".rpanote
+    $objbin/addnote "$ofile" "$ofile".rpanote
+    rm -r "$ofile".rpanote
+    ;;
+chrp)
+    $objbin/addnote -r c00000 "$ofile"
     ;;
 coff)
     ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
new file mode 100644
index 0000000..39bd9eb4
--- /dev/null
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -0,0 +1,921 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Mon Oct 13 13:47:16 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_ACADIA=y
+# CONFIG_EP405 is not set
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+CONFIG_PPC40x_SIMPLE=y
+CONFIG_405EZ=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+CONFIG_IBM_NEW_EMAC_DEBUG=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL=y
+CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y
+CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
new file mode 100644
index 0000000..682fce0
--- /dev/null
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -0,0 +1,929 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.5
+# Tue Sep 16 00:44:33 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_EP405 is not set
+CONFIG_HCU4=y
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
new file mode 100644
index 0000000..70f4607
--- /dev/null
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -0,0 +1,767 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Wed Oct  1 15:54:57 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+CONFIG_ARCHES=y
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+CONFIG_460EX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 5e6780a..0b1fa20f 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -164,11 +164,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 2028337..b7eae2b 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -163,11 +163,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index dd80eb0..b0a27a6 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -163,11 +163,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index bdf50c8..ad825bc 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -163,11 +163,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 4eef8c9..3826750 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -163,11 +163,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 8d65139..90aab34 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -163,11 +163,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index a8afa39..7458a242 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -163,11 +163,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 24c320a..1a92798 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -163,11 +163,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index e029e9e..03d8ced 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -163,11 +163,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
@@ -383,7 +383,84 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 7d674be..cdf8417 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -164,11 +164,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index de47202..97e02d7 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -164,11 +164,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index e8d2d69..5ac3305 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -164,11 +164,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 9245a67..c359cc2 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -162,11 +162,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
new file mode 100644
index 0000000..312d7af
--- /dev/null
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -0,0 +1,1657 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Wed Jun 11 12:06:53 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPC8641_HPCN is not set
+# CONFIG_SBC8641D is not set
+# CONFIG_MPC8610_HPCD is not set
+CONFIG_GEF_SBC610=y
+CONFIG_MPC8641=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_PCI_DEBUG=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RR is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_DS1682=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM92=y
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
new file mode 100644
index 0000000..c98c6ee
--- /dev/null
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -0,0 +1,1497 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:10 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_MPC8641_HPCN is not set
+# CONFIG_SBC8641D is not set
+CONFIG_MPC8610_HPCD=y
+CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
+CONFIG_FSL_ULI1575=y
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_ISA is not set
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_PCI_DEBUG=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+# CONFIG_BLK_DEV_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+CONFIG_PATA_ALI=y
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+# CONFIG_TULIP is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+CONFIG_ULI526X=y
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_FSL_DIU=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+# CONFIG_SND_POWERMAC is not set
+# CONFIG_SND_AOA is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_MPC8610=y
+CONFIG_SND_SOC_MPC8610_HPCD=y
+CONFIG_SND_SOC_CS4270=y
+CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
new file mode 100644
index 0000000..444ddf9
--- /dev/null
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -0,0 +1,1666 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:11 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+CONFIG_MPC8641_HPCN=y
+# CONFIG_SBC8641D is not set
+# CONFIG_MPC8610_HPCD is not set
+CONFIG_MPC8641=y
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
+CONFIG_FSL_ULI1575=y
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_ISA is not set
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+CONFIG_PATA_ALI=y
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_DVB_TTUSB_BUDGET is not set
+# CONFIG_DVB_TTUSB_DEC is not set
+# CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported Pluto2 Adapters
+#
+# CONFIG_DVB_PLUTO2 is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_CX24110 is not set
+# CONFIG_DVB_CX24123 is not set
+# CONFIG_DVB_MT312 is not set
+# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
+# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
+# CONFIG_DVB_L64781 is not set
+# CONFIG_DVB_TDA1004X is not set
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_ZL10353 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+# CONFIG_DVB_DIB7000M is not set
+# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_VES1820 is not set
+# CONFIG_DVB_TDA10021 is not set
+# CONFIG_DVB_TDA10023 is not set
+# CONFIG_DVB_STV0297 is not set
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+# CONFIG_DVB_PLL is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+
+#
+# SEC control devices for DVB-S
+#
+# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
+# CONFIG_DVB_ISL6421 is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+# CONFIG_SND_POWERMAC is not set
+# CONFIG_SND_AOA is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
new file mode 100644
index 0000000..d900f8f
--- /dev/null
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -0,0 +1,1481 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:15 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_MPC8641_HPCN is not set
+CONFIG_SBC8641D=y
+# CONFIG_MPC8610_HPCD is not set
+CONFIG_MPC8641=y
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_ISA is not set
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+# CONFIG_MD_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=y
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+# CONFIG_REISERFS_FS_SECURITY is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index ef0c6e8..cd691f7 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -150,11 +150,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_PPC_82xx=y
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
new file mode 100644
index 0000000..cc9eaba
--- /dev/null
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -0,0 +1,900 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc2
+# Thu May 22 08:18:47 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+CONFIG_PPC_82xx=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_MPC8272_ADS is not set
+# CONFIG_PQ2FADS is not set
+# CONFIG_EP8248E is not set
+CONFIG_MGCOGE=y
+# CONFIG_PQ2ADS is not set
+CONFIG_8260=y
+CONFIG_8272=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+# CONFIG_FS_ENET_HAS_FCC is not set
+# CONFIG_FS_ENET_MDIO_FCC is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
new file mode 100644
index 0000000..3cd6ce4
--- /dev/null
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -0,0 +1,872 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc2
+# Wed May 21 13:30:33 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+CONFIG_PPC_8xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_8xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_CPM1=y
+# CONFIG_MPC8XXFADS is not set
+# CONFIG_MPC86XADS is not set
+# CONFIG_MPC885ADS is not set
+# CONFIG_PPC_EP88XC is not set
+# CONFIG_PPC_ADDER875 is not set
+CONFIG_PPC_MGSUVD=y
+
+#
+# MPC8xx CPM Options
+#
+
+#
+# Generic MPC8xx Options
+#
+CONFIG_8xx_COPYBACK=y
+CONFIG_8xx_CPU6=y
+CONFIG_8xx_CPU15=y
+# CONFIG_NO_UCODE_PATCH is not set
+# CONFIG_USB_SOF_UCODE_PATCH is not set
+# CONFIG_I2C_SPI_UCODE_PATCH is not set
+CONFIG_I2C_SPI_SMC1_UCODE_PATCH=y
+CONFIG_UCODE_PATCH=y
+# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PCI_QSPAN is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xfd000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_CFI_FLAGADM is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+# CONFIG_FS_ENET_HAS_FEC is not set
+# CONFIG_FS_ENET_MDIO_FEC is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+# CONFIG_SERIAL_CPM_SMC2 is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 7c435c8..ff6f7c4 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -151,11 +151,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_PPC_82xx=y
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 916e3df..991c9bd 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -166,11 +166,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
deleted file mode 100644
index 1a99907..0000000
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ /dev/null
@@ -1,1497 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:10 2008
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_6xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_HIBERNATE_32=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_MPC8641_HPCN is not set
-# CONFIG_SBC8641D is not set
-CONFIG_MPC8610_HPCD=y
-CONFIG_MPC8610=y
-# CONFIG_EMBEDDED6xx is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_TAU is not set
-CONFIG_FSL_ULI1575=y
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-# CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_ISA is not set
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-CONFIG_PCI_DEBUG=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-CONFIG_MTD_NAND_FSL_ELBC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-# CONFIG_BLK_DEV_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-CONFIG_ULI526X=y
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-CONFIG_FB_FSL_DIU=y
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-# CONFIG_SND_POWERMAC is not set
-# CONFIG_SND_AOA is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_MPC8610=y
-CONFIG_SND_SOC_MPC8610_HPCD=y
-CONFIG_SND_SOC_CS4270=y
-CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
deleted file mode 100644
index ea09be3..0000000
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ /dev/null
@@ -1,1666 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:11 2008
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_6xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-CONFIG_MPC8641_HPCN=y
-# CONFIG_SBC8641D is not set
-# CONFIG_MPC8610_HPCD is not set
-CONFIG_MPC8641=y
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_TAU is not set
-CONFIG_FSL_ULI1575=y
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_ISA is not set
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_HAS_RAPIDIO=y
-# CONFIG_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_CINERGYT2 is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-# CONFIG_SND_POWERMAC is not set
-# CONFIG_SND_AOA is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
new file mode 100644
index 0000000..9d4be820
--- /dev/null
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -0,0 +1,1646 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Tue Sep 23 23:28:38 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_MPC8xxx_GPIO is not set
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+CONFIG_MPC8641_HPCN=y
+CONFIG_SBC8641D=y
+CONFIG_MPC8610_HPCD=y
+CONFIG_GEF_SBC610=y
+CONFIG_MPC8641=y
+CONFIG_MPC8610=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+CONFIG_FSL_ULI1575=y
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+CONFIG_PATA_ALI=y
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_DVB_TTUSB_BUDGET is not set
+# CONFIG_DVB_TTUSB_DEC is not set
+# CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported Pluto2 Adapters
+#
+# CONFIG_DVB_PLUTO2 is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_CX24110 is not set
+# CONFIG_DVB_CX24123 is not set
+# CONFIG_DVB_MT312 is not set
+# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
+# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
+# CONFIG_DVB_L64781 is not set
+# CONFIG_DVB_TDA1004X is not set
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_ZL10353 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+# CONFIG_DVB_DIB7000M is not set
+# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_VES1820 is not set
+# CONFIG_DVB_TDA10021 is not set
+# CONFIG_DVB_TDA10023 is not set
+# CONFIG_DVB_STV0297 is not set
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+# CONFIG_DVB_PLL is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+
+#
+# SEC control devices for DVB-S
+#
+# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
+# CONFIG_DVB_ISL6421 is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index b390b74..7e17862 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -152,11 +152,11 @@ CONFIG_CLASSIC_RCU=y
 #
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_PPC_82xx=y
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
deleted file mode 100644
index f545421..0000000
--- a/arch/powerpc/configs/sbc8641d_defconfig
+++ /dev/null
@@ -1,1481 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:15 2008
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_6xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_MPC8641_HPCN is not set
-CONFIG_SBC8641D=y
-# CONFIG_MPC8610_HPCD is not set
-CONFIG_MPC8641=y
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-CONFIG_IRQ_ALL_CPUS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_ISA is not set
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-# CONFIG_IP_NF_MATCH_AH is not set
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-# CONFIG_MD_RAID456 is not set
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=y
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_ZERO=y
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-CONFIG_BROADCOM_PHY=y
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-# CONFIG_PPPOL2TP is not set
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_AMS is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-# CONFIG_WATCHDOG_RTAS is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-# CONFIG_REISERFS_FS_SECURITY is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_STATS=y
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-CONFIG_ROMFS_FS=m
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/a.out.h b/arch/powerpc/include/asm/a.out.h
deleted file mode 100644
index 89cead6..0000000
--- a/arch/powerpc/include/asm/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_A_OUT_H
-#define _ASM_POWERPC_A_OUT_H
-
-struct exec
-{
-	unsigned long a_info;	/* Use macros N_MAGIC, etc for access */
-	unsigned a_text;	/* length of text, in bytes */
-	unsigned a_data;	/* length of data, in bytes */
-	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-	unsigned a_syms;	/* length of symbol table data in file, in bytes */
-	unsigned a_entry;	/* start address */
-	unsigned a_trsize;	/* length of relocation info for text, in bytes */
-	unsigned a_drsize;	/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif /* _ASM_POWERPC_A_OUT_H */
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index ef8a248..1e94b07 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -62,6 +62,7 @@ enum powerpc_pmc_type {
 	PPC_PMC_DEFAULT = 0,
 	PPC_PMC_IBM = 1,
 	PPC_PMC_PA6T = 2,
+	PPC_PMC_G4 = 3,
 };
 
 struct pt_regs;
@@ -192,6 +193,7 @@ extern const char *powerpc_base_platform;
 #define CPU_FTR_NO_SLBIE_B		LONG_ASM_CONST(0x0008000000000000)
 #define CPU_FTR_VSX			LONG_ASM_CONST(0x0010000000000000)
 #define CPU_FTR_SAO			LONG_ASM_CONST(0x0020000000000000)
+#define CPU_FTR_CP_USE_DCBTZ		LONG_ASM_CONST(0x0040000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -387,10 +389,11 @@ extern const char *powerpc_base_platform;
 	    CPU_FTR_MMCRA | CPU_FTR_CTRL)
 #define CPU_FTRS_POWER4	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-	    CPU_FTR_MMCRA)
+	    CPU_FTR_MMCRA | CPU_FTR_CP_USE_DCBTZ)
 #define CPU_FTRS_PPC970	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA)
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \
+	    CPU_FTR_CP_USE_DCBTZ)
 #define CPU_FTRS_POWER5	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -411,7 +414,8 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG)
+	    CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | \
+	    CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ)
 #define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h
index 29b0ece..828e3aa 100644
--- a/arch/powerpc/include/asm/dcr-regs.h
+++ b/arch/powerpc/include/asm/dcr-regs.h
@@ -68,6 +68,17 @@
 #define SDR0_UART3		0x0123
 #define SDR0_CUST0		0x4000
 
+/* SDR for 405EZ */
+#define DCRN_SDR_ICINTSTAT	0x4510
+#define ICINTSTAT_ICRX	0x80000000
+#define ICINTSTAT_ICTX0	0x40000000
+#define ICINTSTAT_ICTX1 0x20000000
+#define ICINTSTAT_ICTX	0x60000000
+
+/* SDRs (460EX/460GT) */
+#define SDR0_ETH_CFG		0x4103
+#define SDR0_ETH_CFG_ECS	0x00000100	/* EMAC int clk source */
+
 /*
  * All those DCR register addresses are offsets from the base address
  * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 228ab2a..dfd504c 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -16,9 +16,6 @@ struct dev_archdata {
 	/* DMA operations on that device */
 	struct dma_mapping_ops	*dma_ops;
 	void			*dma_data;
-
-	/* NUMA node if applicable */
-	int			numa_node;
 };
 
 #endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index c7ca45f..fddb229 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -44,8 +44,6 @@ extern void __dma_sync_page(struct page *page, unsigned long offset,
 
 #endif /* ! CONFIG_NOT_COHERENT_CACHE */
 
-#ifdef CONFIG_PPC64
-
 static inline unsigned long device_to_mask(struct device *dev)
 {
 	if (dev->dma_mask && *dev->dma_mask)
@@ -76,8 +74,24 @@ struct dma_mapping_ops {
 				struct dma_attrs *attrs);
 	int		(*dma_supported)(struct device *dev, u64 mask);
 	int		(*set_dma_mask)(struct device *dev, u64 dma_mask);
+	dma_addr_t 	(*map_page)(struct device *dev, struct page *page,
+				unsigned long offset, size_t size,
+				enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	void		(*unmap_page)(struct device *dev,
+				dma_addr_t dma_address, size_t size,
+				enum dma_data_direction direction,
+				struct dma_attrs *attrs);
 };
 
+/*
+ * Available generic sets of operations
+ */
+#ifdef CONFIG_PPC64
+extern struct dma_mapping_ops dma_iommu_ops;
+#endif
+extern struct dma_mapping_ops dma_direct_ops;
+
 static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
 {
 	/* We don't handle the NULL dev case for ISA for now. We could
@@ -85,8 +99,19 @@ static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
 	 * only ISA DMA device we support is the floppy and we have a hack
 	 * in the floppy driver directly to get a device for us.
 	 */
-	if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL))
+
+	if (unlikely(dev == NULL) || dev->archdata.dma_ops == NULL) {
+#ifdef CONFIG_PPC64
 		return NULL;
+#else
+		/* Use default on 32-bit if dma_ops is not set up */
+		/* TODO: Long term, we should fix drivers so that dev and
+		 * archdata dma_ops are set up for all buses.
+		 */
+		return &dma_direct_ops;
+#endif
+	}
+
 	return dev->archdata.dma_ops;
 }
 
@@ -123,6 +148,12 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 	return 0;
 }
 
+/*
+ * TODO: map_/unmap_single will ideally go away, to be completely
+ * replaced by map/unmap_page.   Until then, we allow dma_ops to have
+ * one or the other, or both by checking to see if the specific
+ * function requested exists; and if not, falling back on the other set.
+ */
 static inline dma_addr_t dma_map_single_attrs(struct device *dev,
 					      void *cpu_addr,
 					      size_t size,
@@ -132,7 +163,14 @@ static inline dma_addr_t dma_map_single_attrs(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	return dma_ops->map_single(dev, cpu_addr, size, direction, attrs);
+
+	if (dma_ops->map_single)
+		return dma_ops->map_single(dev, cpu_addr, size, direction,
+					   attrs);
+
+	return dma_ops->map_page(dev, virt_to_page(cpu_addr),
+				 (unsigned long)cpu_addr % PAGE_SIZE, size,
+				 direction, attrs);
 }
 
 static inline void dma_unmap_single_attrs(struct device *dev,
@@ -144,7 +182,13 @@ static inline void dma_unmap_single_attrs(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
+
+	if (dma_ops->unmap_single) {
+		dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
+		return;
+	}
+
+	dma_ops->unmap_page(dev, dma_addr, size, direction, attrs);
 }
 
 static inline dma_addr_t dma_map_page_attrs(struct device *dev,
@@ -156,8 +200,13 @@ static inline dma_addr_t dma_map_page_attrs(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
+
+	if (dma_ops->map_page)
+		return dma_ops->map_page(dev, page, offset, size, direction,
+					 attrs);
+
 	return dma_ops->map_single(dev, page_address(page) + offset, size,
-			direction, attrs);
+				   direction, attrs);
 }
 
 static inline void dma_unmap_page_attrs(struct device *dev,
@@ -169,6 +218,12 @@ static inline void dma_unmap_page_attrs(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
+
+	if (dma_ops->unmap_page) {
+		dma_ops->unmap_page(dev, dma_address, size, direction, attrs);
+		return;
+	}
+
 	dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
 }
 
@@ -253,126 +308,6 @@ static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
 }
 
-/*
- * Available generic sets of operations
- */
-extern struct dma_mapping_ops dma_iommu_ops;
-extern struct dma_mapping_ops dma_direct_ops;
-
-#else /* CONFIG_PPC64 */
-
-#define dma_supported(dev, mask)	(1)
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-
-	return 0;
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t * dma_handle,
-				       gfp_t gfp)
-{
-#ifdef CONFIG_NOT_COHERENT_CACHE
-	return __dma_alloc_coherent(size, dma_handle, gfp);
-#else
-	void *ret;
-	/* ignore region specifiers */
-	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
-
-	if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
-		gfp |= GFP_DMA;
-
-	ret = (void *)__get_free_pages(gfp, get_order(size));
-
-	if (ret != NULL) {
-		memset(ret, 0, size);
-		*dma_handle = virt_to_bus(ret);
-	}
-
-	return ret;
-#endif
-}
-
-static inline void
-dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-		  dma_addr_t dma_handle)
-{
-#ifdef CONFIG_NOT_COHERENT_CACHE
-	__dma_free_coherent(size, vaddr);
-#else
-	free_pages((unsigned long)vaddr, get_order(size));
-#endif
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	       enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	__dma_sync(ptr, size, direction);
-
-	return virt_to_bus(ptr);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	/* We do nothing. */
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	__dma_sync_page(page, offset, size, direction);
-
-	return page_to_bus(page) + offset;
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	/* We do nothing. */
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
-	   enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	BUG_ON(direction == DMA_NONE);
-
-	for_each_sg(sgl, sg, nents, i) {
-		BUG_ON(!sg_page(sg));
-		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-		sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
-	}
-
-	return nents;
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nhwentries,
-				enum dma_data_direction direction)
-{
-	/* We don't do anything here. */
-}
-
-#endif /* CONFIG_PPC64 */
-
 static inline void dma_sync_single_for_cpu(struct device *dev,
 		dma_addr_t dma_handle, size_t size,
 		enum dma_data_direction direction)
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 64c6ee2..d812929 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -232,7 +232,7 @@ typedef elf_vrregset_t elf_fpxregset_t;
 #endif /* __powerpc64__ */
 
 #ifdef __powerpc64__
-# define SET_PERSONALITY(ex, ibcs2)				\
+# define SET_PERSONALITY(ex)					\
 do {								\
 	unsigned long new_flags = 0;				\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
@@ -256,7 +256,7 @@ do {								\
 # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
 		(exec_stk != EXSTACK_DISABLE_X) : 0)
 #else 
-# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+# define SET_PERSONALITY(ex) set_personality(PER_LINUX)
 #endif /* __powerpc64__ */
 
 extern int dcache_bsize;
diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h
index 329148b..d3d4534 100644
--- a/arch/powerpc/include/asm/exception.h
+++ b/arch/powerpc/include/asm/exception.h
@@ -53,14 +53,8 @@
  * low halfword of the address, but for Kdump we need the whole low
  * word.
  */
-#ifdef CONFIG_CRASH_DUMP
 #define LOAD_HANDLER(reg, label)					\
-	oris	reg,reg,(label)@h;	/* virt addr of handler ... */	\
-	ori	reg,reg,(label)@l;	/* .. and the rest */
-#else
-#define LOAD_HANDLER(reg, label)					\
-	ori	reg,reg,(label)@l;	/* virt addr of handler ... */
-#endif
+	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
 
 #define EXCEPTION_PROLOG_1(area)				\
 	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
@@ -72,37 +66,12 @@
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9
 
-/*
- * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
- * The firmware calls the registered system_reset_fwnmi and
- * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
- * a 32bit application at the time of the event.
- * This firmware bug is present on POWER4 and JS20.
- */
-#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label)		\
-	EXCEPTION_PROLOG_1(area);					\
-	clrrdi	r12,r13,32;		/* get high part of &label */	\
-	mfmsr	r10;							\
-	/* force 64bit mode */						\
-	li	r11,5;			/* MSR_SF_LG|MSR_ISF_LG */	\
-	rldimi	r10,r11,61,0;		/* insert into top 3 bits */	\
-	/* done 64bit mode */						\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label)						\
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
 #define EXCEPTION_PROLOG_PSERIES(area, label)				\
 	EXCEPTION_PROLOG_1(area);					\
-	clrrdi	r12,r13,32;		/* get high part of &label */	\
-	mfmsr	r10;							\
+	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
+	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
 	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
 	LOAD_HANDLER(r12,label)						\
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
 	mtspr	SPRN_SRR0,r12;						\
 	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
 	mtspr	SPRN_SRR1,r10;						\
@@ -210,11 +179,10 @@ label##_pSeries:							\
 	std	r10,PACA_EXGEN+EX_R13(r13);				\
 	std	r11,PACA_EXGEN+EX_R11(r13);				\
 	std	r12,PACA_EXGEN+EX_R12(r13);				\
-	clrrdi	r12,r13,32;		/* get high part of &label */	\
-	mfmsr	r10;							\
+	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
+	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
 	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
 	LOAD_HANDLER(r12,label##_common)				\
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
 	mtspr	SPRN_SRR0,r12;						\
 	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
 	mtspr	SPRN_SRR1,r10;						\
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 303f548..63a4f77 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -23,9 +23,9 @@
 #ifndef __ASM_FSL_LBC_H
 #define __ASM_FSL_LBC_H
 
+#include <linux/compiler.h>
 #include <linux/types.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 struct fsl_lbc_bank {
 	__be32 br;             /**< Base Register  */
@@ -227,9 +227,6 @@ struct fsl_lbc_regs {
 	u8 res8[0xF00];
 };
 
-extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-extern spinlock_t fsl_lbc_lock;
-
 /*
  * FSL UPM routines
  */
@@ -268,44 +265,7 @@ static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
 		cpu_relax();
 }
 
-/**
- * fsl_upm_run_pattern - actually run an UPM pattern
- * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
- * @io_base:	remapped pointer to where memory access should happen
- * @mar:	MAR register content during pattern execution
- *
- * This function triggers dummy write to the memory specified by the io_base,
- * thus UPM pattern actually executed. Note that mar usage depends on the
- * pre-programmed AMX bits in the UPM RAM.
- */
-static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
-				      void __iomem *io_base, u32 mar)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&fsl_lbc_lock, flags);
-
-	out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
-
-	switch (upm->width) {
-	case 8:
-		out_8(io_base, 0x0);
-		break;
-	case 16:
-		out_be16(io_base, 0x0);
-		break;
-	case 32:
-		out_be32(io_base, 0x0);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	spin_unlock_irqrestore(&fsl_lbc_lock, flags);
-
-	return ret;
-}
+extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
+			       u32 mar);
 
 #endif /* __ASM_FSL_LBC_H */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 5d99b648..91c58952 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -84,7 +84,7 @@ static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgpro
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte-idx)));
 #endif
-	set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
+	__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
 	flush_tlb_page(NULL, vaddr);
 
 	return (void*) vaddr;
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 77c7fa0..08266d2 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -711,7 +711,7 @@ static inline void * phys_to_virt(unsigned long address)
 /*
  * Change "struct page" to physical address.
  */
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define page_to_phys(page)	((phys_addr_t)page_to_pfn(page) << PAGE_SHIFT)
 
 /* We do NOT want virtual merging, it would put too much pressure on
  * our iommu allocator. Instead, we want drivers to be smart enough
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index a372f76..0a51376 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -236,15 +236,27 @@ extern unsigned int irq_find_mapping(struct irq_host *host,
 extern unsigned int irq_create_direct_mapping(struct irq_host *host);
 
 /**
- * irq_radix_revmap - Find a linux virq from a hw irq number.
+ * irq_radix_revmap_insert - Insert a hw irq to linux virq number mapping.
+ * @host: host owning this hardware interrupt
+ * @virq: linux irq number
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is for use by irq controllers that use a radix tree reverse
+ * mapping for fast lookup.
+ */
+extern void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
+				    irq_hw_number_t hwirq);
+
+/**
+ * irq_radix_revmap_lookup - Find a linux virq from a hw irq number.
  * @host: host owning this hardware interrupt
  * @hwirq: hardware irq number in that host space
  *
  * This is a fast path, for use by irq controller code that uses radix tree
  * revmaps
  */
-extern unsigned int irq_radix_revmap(struct irq_host *host,
-				     irq_hw_number_t hwirq);
+extern unsigned int irq_radix_revmap_lookup(struct irq_host *host,
+					    irq_hw_number_t hwirq);
 
 /**
  * irq_linear_revmap - Find a linux virq from a hw irq number.
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index f6c93c7..a503da9 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -9,6 +9,12 @@
  * Reserve to the end of the FWNMI area, see head_64.S */
 #define KDUMP_RESERVE_LIMIT	0x10000 /* 64K */
 
+/*
+ * Used to differentiate between relocatable kdump kernel and other
+ * kernels
+ */
+#define KDUMP_SIGNATURE	0xfeed1234
+
 #ifdef CONFIG_CRASH_DUMP
 
 #define KDUMP_TRAMPOLINE_START	0x0100
@@ -19,17 +25,18 @@
 #endif /* CONFIG_CRASH_DUMP */
 
 #ifndef __ASSEMBLY__
-#ifdef CONFIG_CRASH_DUMP
 
+extern unsigned long __kdump_flag;
+
+#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_RELOCATABLE)
 extern void reserve_kdump_trampoline(void);
 extern void setup_kdump_trampoline(void);
-
-#else /* !CONFIG_CRASH_DUMP */
-
+#else
+/* !CRASH_DUMP || RELOCATABLE */
 static inline void reserve_kdump_trampoline(void) { ; }
 static inline void setup_kdump_trampoline(void) { ; }
+#endif
 
-#endif /* CONFIG_CRASH_DUMP */
 #endif /* __ASSEMBLY__ */
 
 #endif /* __PPC64_KDUMP_H */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 2655e2a..34b52b7 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -81,11 +81,17 @@ struct kvm_vcpu_arch {
 	struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
 	/* Pages which are referenced in the shadow TLB. */
 	struct page *shadow_pages[PPC44x_TLB_SIZE];
-	/* Copy of the host's TLB. */
-	struct tlbe host_tlb[PPC44x_TLB_SIZE];
+
+	/* Track which TLB entries we've modified in the current exit. */
+	u8 shadow_tlb_mod[PPC44x_TLB_SIZE];
 
 	u32 host_stack;
 	u32 host_pid;
+	u32 host_dbcr0;
+	u32 host_dbcr1;
+	u32 host_dbcr2;
+	u32 host_iac[4];
+	u32 host_msr;
 
 	u64 fpr[32];
 	u32 gpr[32];
@@ -123,7 +129,11 @@ struct kvm_vcpu_arch {
 	u32 ivor[16];
 	u32 ivpr;
 	u32 pir;
+
+	u32 shadow_pid;
 	u32 pid;
+	u32 swap_pid;
+
 	u32 pvr;
 	u32 ccr0;
 	u32 ccr1;
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index a8b0687..8931ba7 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -64,6 +64,10 @@ extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
 extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
                                   gva_t eend, u32 asid);
 extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
+extern void kvmppc_mmu_switch_pid(struct kvm_vcpu *vcpu, u32 pid);
+
+/* XXX Book E specific */
+extern void kvmppc_tlbe_set_modified(struct kvm_vcpu *vcpu, unsigned int i);
 
 extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu);
 
@@ -92,4 +96,12 @@ static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr)
 		kvm_vcpu_block(vcpu);
 }
 
+static inline void kvmppc_set_pid(struct kvm_vcpu *vcpu, u32 new_pid)
+{
+	if (vcpu->arch.pid != new_pid) {
+		vcpu->arch.pid = new_pid;
+		vcpu->arch.swap_pid = 1;
+	}
+}
+
 #endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 893aafd..2740c44 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -88,8 +88,6 @@ struct machdep_calls {
 	unsigned long	(*tce_get)(struct iommu_table *tbl,
 				    long index);
 	void		(*tce_flush)(struct iommu_table *tbl);
-	void		(*pci_dma_dev_setup)(struct pci_dev *dev);
-	void		(*pci_dma_bus_setup)(struct pci_bus *bus);
 
 	void __iomem *	(*ioremap)(phys_addr_t addr, unsigned long size,
 				   unsigned long flags);
@@ -101,6 +99,9 @@ struct machdep_calls {
 #endif
 #endif /* CONFIG_PPC64 */
 
+	void		(*pci_dma_dev_setup)(struct pci_dev *dev);
+	void		(*pci_dma_bus_setup)(struct pci_bus *bus);
+
 	int		(*probe)(void);
 	void		(*setup_arch)(void); /* Optional, may be NULL */
 	void		(*init_early)(void);
diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h
index 9209f75..e7b99ba 100644
--- a/arch/powerpc/include/asm/mman.h
+++ b/arch/powerpc/include/asm/mman.h
@@ -44,7 +44,7 @@ static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot)
 
 static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags)
 {
-	return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0;
+	return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : __pgprot(0);
 }
 #define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags)
 
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index c2df53c..5a44174 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -437,7 +437,7 @@ typedef struct {
 	})
 #endif /* 1 */
 
-/* This is only valid for addresses >= KERNELBASE */
+/* This is only valid for addresses >= PAGE_OFFSET */
 static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
 {
 	if (ssize == MMU_SEGSIZE_256M)
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index fe566a3..34d9ac4 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -5,6 +5,7 @@
 #include <linux/irq.h>
 #include <linux/sysdev.h>
 #include <asm/dcr.h>
+#include <asm/msi_bitmap.h>
 
 /*
  * Global registers
@@ -301,8 +302,7 @@ struct mpic
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	spinlock_t		bitmap_lock;
-	unsigned long		*hwirq_bitmap;
+	struct msi_bitmap	msi_bitmap;
 #endif
 
 #ifdef CONFIG_MPIC_BROKEN_REGREAD
diff --git a/arch/powerpc/include/asm/msi_bitmap.h b/arch/powerpc/include/asm/msi_bitmap.h
new file mode 100644
index 0000000..97ac3f4
--- /dev/null
+++ b/arch/powerpc/include/asm/msi_bitmap.h
@@ -0,0 +1,35 @@
+#ifndef _POWERPC_SYSDEV_MSI_BITMAP_H
+#define _POWERPC_SYSDEV_MSI_BITMAP_H
+
+/*
+ * Copyright 2008, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/of.h>
+#include <asm/irq.h>
+
+struct msi_bitmap {
+	struct device_node	*of_node;
+	unsigned long		*bitmap;
+	spinlock_t		lock;
+	unsigned int		irq_count;
+};
+
+int msi_bitmap_alloc_hwirqs(struct msi_bitmap *bmp, int num);
+void msi_bitmap_free_hwirqs(struct msi_bitmap *bmp, unsigned int offset,
+			    unsigned int num);
+void msi_bitmap_reserve_hwirq(struct msi_bitmap *bmp, unsigned int hwirq);
+
+int msi_bitmap_reserve_dt_hwirqs(struct msi_bitmap *bmp);
+
+int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count,
+		     struct device_node *of_node);
+void msi_bitmap_free(struct msi_bitmap *bmp);
+
+#endif /* _POWERPC_SYSDEV_MSI_BITMAP_H */
diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h
index 3c12399..a64debf 100644
--- a/arch/powerpc/include/asm/of_device.h
+++ b/arch/powerpc/include/asm/of_device.h
@@ -24,8 +24,5 @@ extern struct of_device *of_device_alloc(struct device_node *np,
 extern int of_device_uevent(struct device *dev,
 			    struct kobj_uevent_env *env);
 
-/* This is just here during the transition */
-#include <linux/of_device.h>
-
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_OF_DEVICE_H */
diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h
index 18659ef..53b4650 100644
--- a/arch/powerpc/include/asm/of_platform.h
+++ b/arch/powerpc/include/asm/of_platform.h
@@ -11,9 +11,6 @@
  *
  */
 
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
 /* Platform drivers register/unregister */
 static inline int of_register_platform_driver(struct of_platform_driver *drv)
 {
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 6493a39..082b3ae 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -62,6 +62,8 @@ struct paca_struct {
 	u16 paca_index;			/* Logical processor number */
 
 	u64 kernel_toc;			/* Kernel TOC address */
+	u64 kernelbase;			/* Base address of kernel */
+	u64 kernel_msr;			/* MSR while running in kernel */
 	u64 stab_real;			/* Absolute address of segment table */
 	u64 stab_addr;			/* Virtual address of segment table */
 	void *emergency_sp;		/* pointer to emergency stack */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index e088545..c0b8d4a 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -10,9 +10,13 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#else
+#include <asm/types.h>
+#endif
 #include <asm/asm-compat.h>
 #include <asm/kdump.h>
-#include <asm/types.h>
 
 /*
  * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software
@@ -71,15 +75,22 @@
 #define PAGE_OFFSET	ASM_CONST(CONFIG_PAGE_OFFSET)
 #define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
 
-#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM)
+#if defined(CONFIG_RELOCATABLE)
 #ifndef __ASSEMBLY__
+
 extern phys_addr_t memstart_addr;
 extern phys_addr_t kernstart_addr;
 #endif
 #define PHYSICAL_START	kernstart_addr
-#define MEMORY_START	memstart_addr
 #else
 #define PHYSICAL_START	ASM_CONST(CONFIG_PHYSICAL_START)
+#endif
+
+#ifdef CONFIG_PPC64
+#define MEMORY_START	0UL
+#elif defined(CONFIG_RELOCATABLE)
+#define MEMORY_START	memstart_addr
+#else
 #define MEMORY_START	(PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
 #endif
 
@@ -92,8 +103,8 @@ extern phys_addr_t kernstart_addr;
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 
-#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE))
-#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - MEMORY_START))
+#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START)
 
 /*
  * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
index ebfae53..d77072a 100644
--- a/arch/powerpc/include/asm/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
@@ -13,10 +13,16 @@
 #define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
 #endif
 
+#ifdef CONFIG_PTE_64BIT
+#define PTE_FLAGS_OFFSET	4	/* offset of PTE flags, in bytes */
+#else
+#define PTE_FLAGS_OFFSET	0
+#endif
+
 #ifndef __ASSEMBLY__
 /*
  * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
- * physical addressing.  For now this just the IBM PPC440.
+ * physical addressing.
  */
 #ifdef CONFIG_PTE_64BIT
 typedef unsigned long long pte_basic_t;
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index ae2ea80..9047af7 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -74,6 +74,13 @@ struct pci_controller {
 	unsigned long pci_io_size;
 #endif
 
+	/* Some machines have a special region to forward the ISA
+	 * "memory" cycles such as VGA memory regions. Left to 0
+	 * if unsupported
+	 */
+	resource_size_t	isa_mem_phys;
+	resource_size_t	isa_mem_size;
+
 	struct pci_ops *ops;
 	unsigned int __iomem *cfg_addr;
 	void __iomem *cfg_data;
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index a05a942..39d547f 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -60,6 +60,14 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 	return channel ? 15 : 14;
 }
 
+#ifdef CONFIG_PCI
+extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
+extern struct dma_mapping_ops *get_pci_dma_ops(void);
+#else	/* CONFIG_PCI */
+#define set_pci_dma_ops(d)
+#define get_pci_dma_ops()	NULL
+#endif
+
 #ifdef CONFIG_PPC64
 
 /*
@@ -70,9 +78,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 #define PCI_DISABLE_MWI
 
 #ifdef CONFIG_PCI
-extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
-extern struct dma_mapping_ops *get_pci_dma_ops(void);
-
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -89,9 +94,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 	*strat = PCI_DMA_BURST_MULTIPLE;
 	*strategy_parameter = cacheline_size;
 }
-#else	/* CONFIG_PCI */
-#define set_pci_dma_ops(d)
-#define get_pci_dma_ops()	NULL
 #endif
 
 #else /* 32-bit */
@@ -121,6 +123,16 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
 /* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
 #define HAVE_PCI_MMAP	1
 
+extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
+			   size_t count);
+extern int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val,
+			   size_t count);
+extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
+				      struct vm_area_struct *vma,
+				      enum pci_mmap_state mmap_state);
+
+#define HAVE_PCI_LEGACY	1
+
 #if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
 /*
  * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
@@ -224,5 +236,6 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
 extern void pcibios_do_bus_setup(struct pci_bus *bus);
 extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus);
 
+
 #endif	/* __KERNEL__ */
 #endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 6fe39e3..6ab7c67 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -261,6 +261,7 @@ extern int icache_44x_need_flush;
 #define _PAGE_HWEXEC	0x00000004		/* H: Execute permission */
 #define _PAGE_ACCESSED	0x00000008		/* S: Page referenced */
 #define _PAGE_DIRTY	0x00000010		/* S: Page dirty */
+#define _PAGE_SPECIAL	0x00000020		/* S: Special page */
 #define _PAGE_USER	0x00000040		/* S: User page */
 #define _PAGE_ENDIAN	0x00000080		/* H: E bit */
 #define _PAGE_GUARDED	0x00000100		/* H: G bit */
@@ -276,6 +277,7 @@ extern int icache_44x_need_flush;
 /* ERPN in a PTE never gets cleared, ignore it */
 #define _PTE_NONE_MASK	0xffffffff00000000ULL
 
+#define __HAVE_ARCH_PTE_SPECIAL
 
 #elif defined(CONFIG_FSL_BOOKE)
 /*
@@ -305,6 +307,7 @@ extern int icache_44x_need_flush;
 #define _PAGE_COHERENT	0x00100	/* H: M bit */
 #define _PAGE_NO_CACHE	0x00200	/* H: I bit */
 #define _PAGE_WRITETHRU	0x00400	/* H: W bit */
+#define _PAGE_SPECIAL	0x00800 /* S: Special page */
 
 #ifdef CONFIG_PTE_64BIT
 /* ERPN in a PTE never gets cleared, ignore it */
@@ -315,6 +318,8 @@ extern int icache_44x_need_flush;
 #define _PMD_PRESENT_MASK (PAGE_MASK)
 #define _PMD_BAD	(~PAGE_MASK)
 
+#define __HAVE_ARCH_PTE_SPECIAL
+
 #elif defined(CONFIG_8xx)
 /* Definitions for 8xx embedded chips. */
 #define _PAGE_PRESENT	0x0001	/* Page is valid */
@@ -362,8 +367,14 @@ extern int icache_44x_need_flush;
 #define _PAGE_ACCESSED	0x100	/* R: page referenced */
 #define _PAGE_EXEC	0x200	/* software: i-cache coherency required */
 #define _PAGE_RW	0x400	/* software: user write access allowed */
+#define _PAGE_SPECIAL	0x800	/* software: Special page */
 
+#ifdef CONFIG_PTE_64BIT
+/* We never clear the high word of the pte */
+#define _PTE_NONE_MASK	(0xffffffff00000000ULL | _PAGE_HASHPTE)
+#else
 #define _PTE_NONE_MASK	_PAGE_HASHPTE
+#endif
 
 #define _PMD_PRESENT	0
 #define _PMD_PRESENT_MASK (PAGE_MASK)
@@ -372,6 +383,8 @@ extern int icache_44x_need_flush;
 /* Hash table based platforms need atomic updates of the linux PTE */
 #define PTE_ATOMIC_UPDATES	1
 
+#define __HAVE_ARCH_PTE_SPECIAL
+
 #endif
 
 /*
@@ -404,6 +417,9 @@ extern int icache_44x_need_flush;
 #ifndef _PAGE_WRITETHRU
 #define _PAGE_WRITETHRU	0
 #endif
+#ifndef _PAGE_SPECIAL
+#define _PAGE_SPECIAL	0
+#endif
 #ifndef _PMD_PRESENT_MASK
 #define _PMD_PRESENT_MASK	_PMD_PRESENT
 #endif
@@ -415,11 +431,11 @@ extern int icache_44x_need_flush;
 #define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
 
 
-#define PAGE_PROT_BITS	__pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
-				 _PAGE_WRITETHRU | _PAGE_ENDIAN | \
-				 _PAGE_USER | _PAGE_ACCESSED | \
-				 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
-				 _PAGE_EXEC | _PAGE_HWEXEC)
+#define PAGE_PROT_BITS	(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
+			 _PAGE_WRITETHRU | _PAGE_ENDIAN | \
+			 _PAGE_USER | _PAGE_ACCESSED | \
+			 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
+			 _PAGE_EXEC | _PAGE_HWEXEC)
 /*
  * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
  * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
@@ -517,7 +533,8 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 
 #define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
 #define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,ptep)	do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+#define pte_clear(mm, addr, ptep) \
+	do { pte_update(ptep, ~_PAGE_HASHPTE, 0); } while (0)
 
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
@@ -533,7 +550,7 @@ static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
 static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
 static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte)	{ return 0; }
+static inline int pte_special(pte_t pte)	{ return pte_val(pte) & _PAGE_SPECIAL; }
 
 static inline void pte_uncache(pte_t pte)       { pte_val(pte) |= _PAGE_NO_CACHE; }
 static inline void pte_cache(pte_t pte)         { pte_val(pte) &= ~_PAGE_NO_CACHE; }
@@ -552,10 +569,10 @@ static inline pte_t pte_mkdirty(pte_t pte) {
 static inline pte_t pte_mkyoung(pte_t pte) {
 	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
 static inline pte_t pte_mkspecial(pte_t pte) {
-	return pte; }
-static inline unsigned long pte_pgprot(pte_t pte)
+	pte_val(pte) |= _PAGE_SPECIAL; return pte; }
+static inline pgprot_t pte_pgprot(pte_t pte)
 {
-	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+	return __pgprot(pte_val(pte) & PAGE_PROT_BITS);
 }
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
@@ -575,6 +592,10 @@ extern int flush_hash_pages(unsigned context, unsigned long va,
 extern void add_hash_page(unsigned context, unsigned long va,
 			  unsigned long pmdval);
 
+/* Flush an entry from the TLB/hash table */
+extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
+			     unsigned long address);
+
 /*
  * Atomic PTE updates.
  *
@@ -612,9 +633,6 @@ static inline unsigned long pte_update(pte_t *p,
 	return old;
 }
 #else /* CONFIG_PTE_64BIT */
-/* TODO: Change that to only modify the low word and move set_pte_at()
- * out of line
- */
 static inline unsigned long long pte_update(pte_t *p,
 					    unsigned long clr,
 					    unsigned long set)
@@ -652,14 +670,36 @@ static inline unsigned long long pte_update(pte_t *p,
  * On machines which use an MMU hash table we avoid changing the
  * _PAGE_HASHPTE bit.
  */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+
+static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pte)
 {
-#if _PAGE_HASHPTE != 0
+#if (_PAGE_HASHPTE != 0) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
 	pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
+#elif defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
+#if _PAGE_HASHPTE != 0
+	if (pte_val(*ptep) & _PAGE_HASHPTE)
+		flush_hash_entry(mm, ptep, addr);
+#endif
+	__asm__ __volatile__("\
+		stw%U0%X0 %2,%0\n\
+		eieio\n\
+		stw%U0%X0 %L2,%1"
+	: "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
+	: "r" (pte) : "memory");
 #else
-	*ptep = pte;
+	*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+		      | (pte_val(pte) & ~_PAGE_HASHPTE));
+#endif
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+#if defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
+	WARN_ON(pte_present(*ptep));
 #endif
+	__set_pte_at(mm, addr, ptep, pte);
 }
 
 /*
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 4597c49..4c0a8c6 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -117,10 +117,10 @@
 #define PAGE_AGP	__pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
 #define HAVE_PAGE_AGP
 
-#define PAGE_PROT_BITS	__pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \
-				 _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
-				 _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
- 				 _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
+#define PAGE_PROT_BITS	(_PAGE_GUARDED | _PAGE_COHERENT | \
+			 _PAGE_NO_CACHE | _PAGE_WRITETHRU |		\
+			 _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER |		\
+			 _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
 /* PTEIDX nibble */
 #define _PTEIDX_SECONDARY	0x8
 #define _PTEIDX_GROUP_IX	0x7
@@ -264,9 +264,9 @@ static inline pte_t pte_mkhuge(pte_t pte) {
 	return pte; }
 static inline pte_t pte_mkspecial(pte_t pte) {
 	pte_val(pte) |= _PAGE_SPECIAL; return pte; }
-static inline unsigned long pte_pgprot(pte_t pte)
+static inline pgprot_t pte_pgprot(pte_t pte)
 {
-	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+	return __pgprot(pte_val(pte) & PAGE_PROT_BITS);
 }
 
 /* Atomic PTE updates */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 0966899..c4a029c 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -268,7 +268,7 @@ n:
  *   Loads the value of the constant expression 'expr' into register 'rn'
  *   using immediate instructions only.  Use this when it's important not
  *   to reference other data (i.e. on ppc64 when the TOC pointer is not
- *   valid).
+ *   valid) and when 'expr' is a constant or absolute address.
  *
  * LOAD_REG_ADDR(rn, name)
  *   Loads the address of label 'name' into register 'rn'.  Use this when
diff --git a/arch/powerpc/include/asm/ps3av.h b/arch/powerpc/include/asm/ps3av.h
index fda9871..5aa22cf 100644
--- a/arch/powerpc/include/asm/ps3av.h
+++ b/arch/powerpc/include/asm/ps3av.h
@@ -678,6 +678,8 @@ struct ps3av_pkt_avb_param {
 	u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE];
 };
 
+/* channel status */
+extern u8 ps3av_mode_cs_info[];
 
 /** command status **/
 #define PS3AV_STATUS_SUCCESS			0x0000	/* success */
@@ -735,6 +737,7 @@ extern int ps3av_get_mode(void);
 extern int ps3av_video_mode2res(u32, u32 *, u32 *);
 extern int ps3av_video_mute(int);
 extern int ps3av_audio_mute(int);
+extern int ps3av_audio_mute_analog(int);
 extern int ps3av_dev_open(void);
 extern int ps3av_dev_close(void);
 extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data),
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 734e075..280a90c 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -129,7 +129,7 @@ extern int ptrace_put_reg(struct task_struct *task, int regno,
 #define CHECK_FULL_REGS(regs)						      \
 do {									      \
 	if ((regs)->trap & 1)						      \
-		printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
+		printk(KERN_CRIT "%s: partial register set\n", __func__); \
 } while (0)
 #endif /* __powerpc64__ */
 
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index be980f4..6745376 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -109,6 +109,7 @@
 #define SPRN_EVPR	0x3D6	/* Exception Vector Prefix Register */
 #define SPRN_L1CSR0	0x3F2	/* L1 Cache Control and Status Register 0 */
 #define SPRN_L1CSR1	0x3F3	/* L1 Cache Control and Status Register 1 */
+#define SPRN_MMUCSR0	0x3F4	/* MMU Control and Status Register 0 */
 #define SPRN_PIT	0x3DB	/* Programmable Interval Timer */
 #define SPRN_BUCSR	0x3F5	/* Branch Unit Control and Status */
 #define SPRN_L2CSR0	0x3F9	/* L2 Data Cache Control and Status Register 0 */
@@ -410,6 +411,12 @@
 #define L2CSR0_L2LOA	0x00000080	/* L2 Cache Lock Overflow Allocate */
 #define L2CSR0_L2LO	0x00000020	/* L2 Cache Lock Overflow */
 
+/* Bit definitions for MMUCSR0 */
+#define MMUCSR0_TLB1FI	0x00000002	/* TLB1 Flash invalidate */
+#define MMUCSR0_TLB0FI	0x00000004	/* TLB0 Flash invalidate */
+#define MMUCSR0_TLB2FI	0x00000040	/* TLB2 Flash invalidate */
+#define MMUCSR0_TLB3FI	0x00000020	/* TLB3 Flash invalidate */
+
 /* Bit definitions for SGR. */
 #define SGR_NORMAL	0		/* Speculative fetching allowed. */
 #define SGR_GUARDED	1		/* Speculative fetching disallowed. */
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index 07956f3..6fbce72 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -18,6 +18,12 @@ static inline int in_kernel_text(unsigned long addr)
 	return 0;
 }
 
+static inline int overlaps_kernel_text(unsigned long start, unsigned long end)
+{
+	return start < (unsigned long)__init_end &&
+		(unsigned long)_stext < end;
+}
+
 #undef dereference_function_descriptor
 static inline void *dereference_function_descriptor(void *ptr)
 {
diff --git a/arch/powerpc/include/asm/sfp-machine.h b/arch/powerpc/include/asm/sfp-machine.h
new file mode 100644
index 0000000..ced34f1
--- /dev/null
+++ b/arch/powerpc/include/asm/sfp-machine.h
@@ -0,0 +1,353 @@
+/* Machine-dependent software floating-point definitions.  PPC version.
+   Copyright (C) 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+   Actually, this is a PPC (32bit) version, written based on the
+   i386, sparc, and sparc64 versions, by me,
+   Peter Maydell (pmaydell@chiark.greenend.org.uk).
+   Comments are by and large also mine, although they may be inaccurate.
+
+   In picking out asm fragments I've gone with the lowest common
+   denominator, which also happens to be the hardware I have :->
+   That is, a SPARC without hardware multiply and divide.
+ */
+
+/* basic word size definitions */
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define __ll_B			((UWtype) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t)		((UWtype) (t) & (__ll_B - 1))
+#define __ll_highpart(t)	((UWtype) (t) >> (W_TYPE_SIZE / 2))
+
+/* You can optionally code some things like addition in asm. For
+ * example, i386 defines __FP_FRAC_ADD_2 as asm. If you don't
+ * then you get a fragment of C code [if you change an #ifdef 0
+ * in op-2.h] or a call to add_ssaaaa (see below).
+ * Good places to look for asm fragments to use are gcc and glibc.
+ * gcc's longlong.h is useful.
+ */
+
+/* We need to know how to multiply and divide. If the host word size
+ * is >= 2*fracbits you can use FP_MUL_MEAT_n_imm(t,R,X,Y) which
+ * codes the multiply with whatever gcc does to 'a * b'.
+ * _FP_MUL_MEAT_n_wide(t,R,X,Y,f) is used when you have an asm
+ * function that can multiply two 1W values and get a 2W result.
+ * Otherwise you're stuck with _FP_MUL_MEAT_n_hard(t,R,X,Y) which
+ * does bitshifting to avoid overflow.
+ * For division there is FP_DIV_MEAT_n_imm(t,R,X,Y,f) for word size
+ * >= 2*fracbits, where f is either _FP_DIV_HELP_imm or
+ * _FP_DIV_HELP_ldiv (see op-1.h).
+ * _FP_DIV_MEAT_udiv() is if you have asm to do 2W/1W => (1W, 1W).
+ * [GCC and glibc have longlong.h which has the asm macro udiv_qrnnd
+ * to do this.]
+ * In general, 'n' is the number of words required to hold the type,
+ * and 't' is either S, D or Q for single/double/quad.
+ *           -- PMM
+ */
+/* Example: SPARC64:
+ * #define _FP_MUL_MEAT_S(R,X,Y)	_FP_MUL_MEAT_1_imm(S,R,X,Y)
+ * #define _FP_MUL_MEAT_D(R,X,Y)	_FP_MUL_MEAT_1_wide(D,R,X,Y,umul_ppmm)
+ * #define _FP_MUL_MEAT_Q(R,X,Y)	_FP_MUL_MEAT_2_wide(Q,R,X,Y,umul_ppmm)
+ *
+ * #define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
+ * #define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv(D,R,X,Y)
+ * #define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv_64(Q,R,X,Y)
+ *
+ * Example: i386:
+ * #define _FP_MUL_MEAT_S(R,X,Y)   _FP_MUL_MEAT_1_wide(S,R,X,Y,_i386_mul_32_64)
+ * #define _FP_MUL_MEAT_D(R,X,Y)   _FP_MUL_MEAT_2_wide(D,R,X,Y,_i386_mul_32_64)
+ *
+ * #define _FP_DIV_MEAT_S(R,X,Y)   _FP_DIV_MEAT_1_udiv(S,R,X,Y,_i386_div_64_32)
+ * #define _FP_DIV_MEAT_D(R,X,Y)   _FP_DIV_MEAT_2_udiv_64(D,R,X,Y)
+ */
+
+#define _FP_MUL_MEAT_S(R,X,Y)   _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)   _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+
+/* These macros define what NaN looks like. They're supposed to expand to
+ * a comma-separated set of 32bit unsigned ints that encode NaN.
+ */
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/* Exception flags.  We use the bit positions of the appropriate bits
+   in the FPSCR, which also correspond to the FE_* bits.  This makes
+   everything easier ;-).  */
+#define FP_EX_INVALID         (1 << (31 - 2))
+#define FP_EX_INVALID_SNAN	EFLAG_VXSNAN
+#define FP_EX_INVALID_ISI	EFLAG_VXISI
+#define FP_EX_INVALID_IDI	EFLAG_VXIDI
+#define FP_EX_INVALID_ZDZ	EFLAG_VXZDZ
+#define FP_EX_INVALID_IMZ	EFLAG_VXIMZ
+#define FP_EX_OVERFLOW        (1 << (31 - 3))
+#define FP_EX_UNDERFLOW       (1 << (31 - 4))
+#define FP_EX_DIVZERO         (1 << (31 - 5))
+#define FP_EX_INEXACT         (1 << (31 - 6))
+
+/* This macro appears to be called when both X and Y are NaNs, and
+ * has to choose one and copy it to R. i386 goes for the larger of the
+ * two, sparc64 just picks Y. I don't understand this at all so I'll
+ * go with sparc64 because it's shorter :->   -- PMM
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)		\
+  do {							\
+    R##_s = Y##_s;					\
+    _FP_FRAC_COPY_##wc(R,Y);				\
+    R##_c = FP_CLS_NAN;					\
+  } while (0)
+
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#define __FPU_FPSCR	(current->thread.fpscr.val)
+
+/* We only actually write to the destination register
+ * if exceptions signalled (if any) will not trap.
+ */
+#define __FPU_ENABLED_EXC \
+({						\
+	(__FPU_FPSCR >> 3) & 0x1f;	\
+})
+
+#define __FPU_TRAP_P(bits) \
+	((__FPU_ENABLED_EXC & (bits)) != 0)
+
+#define __FP_PACK_S(val,X)			\
+({  int __exc = _FP_PACK_CANONICAL(S,1,X);	\
+    if(!__exc || !__FPU_TRAP_P(__exc))		\
+        _FP_PACK_RAW_1_P(S,val,X);		\
+    __exc;					\
+})
+
+#define __FP_PACK_D(val,X)			\
+   do {									\
+	_FP_PACK_CANONICAL(D, 2, X);					\
+	if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS))	\
+		_FP_PACK_RAW_2_P(D, val, X);				\
+   } while (0)
+
+#define __FP_PACK_DS(val,X)							\
+   do {										\
+	   FP_DECL_S(__X);							\
+	   FP_CONV(S, D, 1, 2, __X, X);						\
+	   _FP_PACK_CANONICAL(S, 1, __X);					\
+	   if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS)) {	\
+		   _FP_UNPACK_CANONICAL(S, 1, __X);				\
+		   FP_CONV(D, S, 2, 1, X, __X);					\
+		   _FP_PACK_CANONICAL(D, 2, X);					\
+		   if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS))	\
+		   _FP_PACK_RAW_2_P(D, val, X);					\
+	   }									\
+   } while (0)
+
+/* Obtain the current rounding mode. */
+#define FP_ROUNDMODE			\
+({					\
+	__FPU_FPSCR & 0x3;		\
+})
+
+/* the asm fragments go here: all these are taken from glibc-2.0.5's
+ * stdlib/longlong.h
+ */
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/* add_ssaaaa is used in op-2.h and should be equivalent to
+ * #define add_ssaaaa(sh,sl,ah,al,bh,bl) (sh = ah+bh+ (( sl = al+bl) < al))
+ * add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
+ * high_addend_2, low_addend_2) adds two UWtype integers, composed by
+ * HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2
+ * respectively.  The result is placed in HIGH_SUM and LOW_SUM.  Overflow
+ * (i.e. carry out) is not stored anywhere, and is lost.
+ */
+#define add_ssaaaa(sh, sl, ah, al, bh, bl)				\
+  do {									\
+    if (__builtin_constant_p (bh) && (bh) == 0)				\
+      __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2"		\
+	     : "=r" ((USItype)(sh)),					\
+	       "=&r" ((USItype)(sl))					\
+	     : "%r" ((USItype)(ah)),					\
+	       "%r" ((USItype)(al)),					\
+	       "rI" ((USItype)(bl)));					\
+    else if (__builtin_constant_p (bh) && (bh) ==~(USItype) 0)		\
+      __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2"		\
+	     : "=r" ((USItype)(sh)),					\
+	       "=&r" ((USItype)(sl))					\
+	     : "%r" ((USItype)(ah)),					\
+	       "%r" ((USItype)(al)),					\
+	       "rI" ((USItype)(bl)));					\
+    else								\
+      __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3"		\
+	     : "=r" ((USItype)(sh)),					\
+	       "=&r" ((USItype)(sl))					\
+	     : "%r" ((USItype)(ah)),					\
+	       "r" ((USItype)(bh)),					\
+	       "%r" ((USItype)(al)),					\
+	       "rI" ((USItype)(bl)));					\
+  } while (0)
+
+/* sub_ddmmss is used in op-2.h and udivmodti4.c and should be equivalent to
+ * #define sub_ddmmss(sh, sl, ah, al, bh, bl) (sh = ah-bh - ((sl = al-bl) > al))
+ * sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend,
+ * high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers,
+ * composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and
+ * LOW_SUBTRAHEND_2 respectively.  The result is placed in HIGH_DIFFERENCE
+ * and LOW_DIFFERENCE.  Overflow (i.e. carry out) is not stored anywhere,
+ * and is lost.
+ */
+#define sub_ddmmss(sh, sl, ah, al, bh, bl)				\
+  do {									\
+    if (__builtin_constant_p (ah) && (ah) == 0)				\
+      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2"	\
+	       : "=r" ((USItype)(sh)),					\
+		 "=&r" ((USItype)(sl))					\
+	       : "r" ((USItype)(bh)),					\
+		 "rI" ((USItype)(al)),					\
+		 "r" ((USItype)(bl)));					\
+    else if (__builtin_constant_p (ah) && (ah) ==~(USItype) 0)		\
+      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2"	\
+	       : "=r" ((USItype)(sh)),					\
+		 "=&r" ((USItype)(sl))					\
+	       : "r" ((USItype)(bh)),					\
+		 "rI" ((USItype)(al)),					\
+		 "r" ((USItype)(bl)));					\
+    else if (__builtin_constant_p (bh) && (bh) == 0)			\
+      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2"		\
+	       : "=r" ((USItype)(sh)),					\
+		 "=&r" ((USItype)(sl))					\
+	       : "r" ((USItype)(ah)),					\
+		 "rI" ((USItype)(al)),					\
+		 "r" ((USItype)(bl)));					\
+    else if (__builtin_constant_p (bh) && (bh) ==~(USItype) 0)		\
+      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2"		\
+	       : "=r" ((USItype)(sh)),					\
+		 "=&r" ((USItype)(sl))					\
+	       : "r" ((USItype)(ah)),					\
+		 "rI" ((USItype)(al)),					\
+		 "r" ((USItype)(bl)));					\
+    else								\
+      __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2"	\
+	       : "=r" ((USItype)(sh)),					\
+		 "=&r" ((USItype)(sl))					\
+	       : "r" ((USItype)(ah)),					\
+		 "r" ((USItype)(bh)),					\
+		 "rI" ((USItype)(al)),					\
+		 "r" ((USItype)(bl)));					\
+  } while (0)
+
+/* asm fragments for mul and div */
+
+/* umul_ppmm(high_prod, low_prod, multipler, multiplicand) multiplies two
+ * UWtype integers MULTIPLER and MULTIPLICAND, and generates a two UWtype
+ * word product in HIGH_PROD and LOW_PROD.
+ */
+#define umul_ppmm(ph, pl, m0, m1)					\
+  do {									\
+    USItype __m0 = (m0), __m1 = (m1);					\
+    __asm__ ("mulhwu %0,%1,%2"						\
+	     : "=r" ((USItype)(ph))					\
+	     : "%r" (__m0),						\
+               "r" (__m1));						\
+    (pl) = __m0 * __m1;							\
+  } while (0)
+
+/* udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
+ * denominator) divides a UDWtype, composed by the UWtype integers
+ * HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient
+ * in QUOTIENT and the remainder in REMAINDER.  HIGH_NUMERATOR must be less
+ * than DENOMINATOR for correct operation.  If, in addition, the most
+ * significant bit of DENOMINATOR must be 1, then the pre-processor symbol
+ * UDIV_NEEDS_NORMALIZATION is defined to 1.
+ */
+#define udiv_qrnnd(q, r, n1, n0, d)					\
+  do {									\
+    UWtype __d1, __d0, __q1, __q0, __r1, __r0, __m;			\
+    __d1 = __ll_highpart (d);						\
+    __d0 = __ll_lowpart (d);						\
+									\
+    __r1 = (n1) % __d1;							\
+    __q1 = (n1) / __d1;							\
+    __m = (UWtype) __q1 * __d0;						\
+    __r1 = __r1 * __ll_B | __ll_highpart (n0);				\
+    if (__r1 < __m)							\
+      {									\
+	__q1--, __r1 += (d);						\
+	if (__r1 >= (d)) /* we didn't get carry when adding to __r1 */	\
+	  if (__r1 < __m)						\
+	    __q1--, __r1 += (d);					\
+      }									\
+    __r1 -= __m;							\
+									\
+    __r0 = __r1 % __d1;							\
+    __q0 = __r1 / __d1;							\
+    __m = (UWtype) __q0 * __d0;						\
+    __r0 = __r0 * __ll_B | __ll_lowpart (n0);				\
+    if (__r0 < __m)							\
+      {									\
+	__q0--, __r0 += (d);						\
+	if (__r0 >= (d))						\
+	  if (__r0 < __m)						\
+	    __q0--, __r0 += (d);					\
+      }									\
+    __r0 -= __m;							\
+									\
+    (q) = (UWtype) __q1 * __ll_B | __q0;				\
+    (r) = __r0;								\
+  } while (0)
+
+#define UDIV_NEEDS_NORMALIZATION 1
+
+#define abort()								\
+	return 0
+
+#ifdef __BIG_ENDIAN
+#define __BYTE_ORDER __BIG_ENDIAN
+#else
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#endif
+
+/* Exception flags. */
+#define EFLAG_INVALID		(1 << (31 - 2))
+#define EFLAG_OVERFLOW		(1 << (31 - 3))
+#define EFLAG_UNDERFLOW		(1 << (31 - 4))
+#define EFLAG_DIVZERO		(1 << (31 - 5))
+#define EFLAG_INEXACT		(1 << (31 - 6))
+
+#define EFLAG_VXSNAN		(1 << (31 - 7))
+#define EFLAG_VXISI		(1 << (31 - 8))
+#define EFLAG_VXIDI		(1 << (31 - 9))
+#define EFLAG_VXZDZ		(1 << (31 - 10))
+#define EFLAG_VXIMZ		(1 << (31 - 11))
+#define EFLAG_VXVC		(1 << (31 - 12))
+#define EFLAG_VXSOFT		(1 << (31 - 21))
+#define EFLAG_VXSQRT		(1 << (31 - 22))
+#define EFLAG_VXCVI		(1 << (31 - 23))
diff --git a/arch/powerpc/include/asm/siginfo.h b/arch/powerpc/include/asm/siginfo.h
index 12f1bce..49495b0 100644
--- a/arch/powerpc/include/asm/siginfo.h
+++ b/arch/powerpc/include/asm/siginfo.h
@@ -15,11 +15,6 @@
 
 #include <asm-generic/siginfo.h>
 
-/*
- * SIGTRAP si_codes
- */
-#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
-#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
 #undef NSIGTRAP
 #define NSIGTRAP	4
 
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
index a7360cd..69f709d 100644
--- a/arch/powerpc/include/asm/signal.h
+++ b/arch/powerpc/include/asm/signal.h
@@ -122,7 +122,6 @@ typedef struct sigaltstack {
 
 #ifdef __KERNEL__
 struct pt_regs;
-extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
 #define ptrace_signal_deliver(regs, cookie) do { } while (0)
 #endif /* __KERNEL__ */
 
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 4d28e1e..1866cec 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -56,9 +56,16 @@ extern int smp_hw_index[];
 
 #define raw_smp_processor_id()	(current_thread_info()->cpu)
 #define hard_smp_processor_id() 	(smp_hw_index[smp_processor_id()])
-#define get_hard_smp_processor_id(cpu)	(smp_hw_index[(cpu)])
-#define set_hard_smp_processor_id(cpu, phys)\
-					(smp_hw_index[(cpu)] = (phys))
+
+static inline int get_hard_smp_processor_id(int cpu)
+{
+	return smp_hw_index[cpu];
+}
+
+static inline void set_hard_smp_processor_id(int cpu, int phys)
+{
+	smp_hw_index[cpu] = phys;
+}
 #endif
 
 DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
@@ -86,15 +93,21 @@ extern void __cpu_die(unsigned int cpu);
 
 #else
 /* for UP */
-#define hard_smp_processor_id()		0
+#define hard_smp_processor_id()		get_hard_smp_processor_id(0)
 #define smp_setup_cpu_maps()
 
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PPC64
-#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
-#define set_hard_smp_processor_id(CPU, VAL) \
-	do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
+static inline int get_hard_smp_processor_id(int cpu)
+{
+	return paca[cpu].hw_cpu_id;
+}
+
+static inline void set_hard_smp_processor_id(int cpu, int phys)
+{
+	paca[cpu].hw_cpu_id = phys;
+}
 
 extern void smp_release_cpus(void);
 
@@ -102,10 +115,17 @@ extern void smp_release_cpus(void);
 /* 32-bit */
 #ifndef CONFIG_SMP
 extern int boot_cpuid_phys;
-#define get_hard_smp_processor_id(cpu) 	boot_cpuid_phys
-#define set_hard_smp_processor_id(cpu, phys)
-#endif
-#endif
+static inline int get_hard_smp_processor_id(int cpu)
+{
+	return boot_cpuid_phys;
+}
+
+static inline void set_hard_smp_processor_id(int cpu, int phys)
+{
+	boot_cpuid_phys = phys;
+}
+#endif /* !CONFIG_SMP */
+#endif /* !CONFIG_PPC64 */
 
 extern int smt_enabled_at_boot;
 
diff --git a/arch/powerpc/include/asm/statfs.h b/arch/powerpc/include/asm/statfs.h
index 6702402..5244834 100644
--- a/arch/powerpc/include/asm/statfs.h
+++ b/arch/powerpc/include/asm/statfs.h
@@ -1,60 +1,6 @@
 #ifndef _ASM_POWERPC_STATFS_H
 #define _ASM_POWERPC_STATFS_H
 
-/* For ppc32 we just use the generic definitions, not so simple on ppc64 */
-
-#ifndef __powerpc64__
 #include <asm-generic/statfs.h>
-#else
-
-#ifndef __KERNEL_STRICT_NAMES
-#include <linux/types.h>
-typedef __kernel_fsid_t	fsid_t;
-#endif
-
-/*
- * We're already 64-bit, so duplicate the definition
- */
-struct statfs {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
-
-struct statfs64 {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
 
-struct compat_statfs64 {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u64 f_blocks;
-	__u64 f_bfree;
-	__u64 f_bavail;
-	__u64 f_files;
-	__u64 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-};
-#endif /* ! __powerpc64__ */
 #endif
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index f6cc7a4..803def23 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -32,7 +32,7 @@ COMPAT_SYS_SPU(stime)
 COMPAT_SYS(ptrace)
 SYSCALL_SPU(alarm)
 OLDSYS(fstat)
-COMPAT_SYS(pause)
+SYSCALL(pause)
 COMPAT_SYS(utime)
 SYSCALL(ni_syscall)
 SYSCALL(ni_syscall)
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index 361cd5c..a2c6bfd 100644
--- a/arch/powerpc/include/asm/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -29,6 +29,9 @@
 #include <linux/mm.h>
 
 extern void _tlbie(unsigned long address, unsigned int pid);
+extern void _tlbil_all(void);
+extern void _tlbil_pid(unsigned int pid);
+extern void _tlbil_va(unsigned long address, unsigned int pid);
 
 #if defined(CONFIG_40x) || defined(CONFIG_8xx)
 #define _tlbia()	asm volatile ("tlbia; sync" : : : "memory")
@@ -38,31 +41,31 @@ extern void _tlbia(void);
 
 static inline void flush_tlb_mm(struct mm_struct *mm)
 {
-	_tlbia();
+	_tlbil_pid(mm->context.id);
 }
 
 static inline void flush_tlb_page(struct vm_area_struct *vma,
 				  unsigned long vmaddr)
 {
-	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+	_tlbil_va(vmaddr, vma ? vma->vm_mm->context.id : 0);
 }
 
 static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
 					 unsigned long vmaddr)
 {
-	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+	flush_tlb_page(vma, vmaddr);
 }
 
 static inline void flush_tlb_range(struct vm_area_struct *vma,
 				   unsigned long start, unsigned long end)
 {
-	_tlbia();
+	_tlbil_pid(vma->vm_mm->context.id);
 }
 
 static inline void flush_tlb_kernel_range(unsigned long start,
 					  unsigned long end)
 {
-	_tlbia();
+	_tlbil_pid(0);
 }
 
 #elif defined(CONFIG_PPC32)
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index d3374bc..c004c13 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -48,14 +48,7 @@ typedef struct {
 
 typedef __vector128 vector128;
 
-/* Physical address used by some IO functions */
-#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT)
-typedef u64 phys_addr_t;
-#else
-typedef u32 phys_addr_t;
-#endif
-
-#ifdef __powerpc64__
+#if defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT)
 typedef u64 dma_addr_t;
 #else
 typedef u32 dma_addr_t;
diff --git a/arch/powerpc/kernel/.gitignore b/arch/powerpc/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/arch/powerpc/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 946daea..fdb5825 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -28,13 +28,14 @@ endif
 obj-y				:= cputable.o ptrace.o syscalls.o \
 				   irq.o align.o signal_32.o pmc.o vdso.o \
 				   init_task.o process.o systbl.o idle.o \
-				   signal.o
+				   signal.o sysfs.o
 obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
 				   paca.o cpu_setup_ppc970.o \
 				   cpu_setup_pa6t.o \
-				   firmware.o sysfs.o nvram_64.o
+				   firmware.o nvram_64.o
+obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
@@ -69,10 +70,10 @@ extra-$(CONFIG_8xx)		:= head_8xx.o
 extra-y				+= vmlinux.lds
 
 obj-y				+= time.o prom.o traps.o setup-common.o \
-				   udbg.o misc.o io.o \
+				   udbg.o misc.o io.o dma.o \
 				   misc_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o
-obj-$(CONFIG_PPC64)		+= dma_64.o iommu.o
+obj-$(CONFIG_PPC64)		+= dma-iommu.o iommu.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PPC_MULTIPLATFORM)	+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 92768d3..75c5dd0 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -122,6 +122,8 @@ int main(void)
 	DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr));
 	DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
 	DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc));
+	DEFINE(PACAKBASE, offsetof(struct paca_struct, kernelbase));
+	DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr));
 	DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
 	DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
 	DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
@@ -350,14 +352,15 @@ int main(void)
 #endif
 
 	DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE);
+	DEFINE(PTE_SIZE, sizeof(pte_t));
 
 #ifdef CONFIG_KVM
 	DEFINE(TLBE_BYTES, sizeof(struct tlbe));
 
 	DEFINE(VCPU_HOST_STACK, offsetof(struct kvm_vcpu, arch.host_stack));
 	DEFINE(VCPU_HOST_PID, offsetof(struct kvm_vcpu, arch.host_pid));
-	DEFINE(VCPU_HOST_TLB, offsetof(struct kvm_vcpu, arch.host_tlb));
 	DEFINE(VCPU_SHADOW_TLB, offsetof(struct kvm_vcpu, arch.shadow_tlb));
+	DEFINE(VCPU_SHADOW_MOD, offsetof(struct kvm_vcpu, arch.shadow_tlb_mod));
 	DEFINE(VCPU_GPRS, offsetof(struct kvm_vcpu, arch.gpr));
 	DEFINE(VCPU_LR, offsetof(struct kvm_vcpu, arch.lr));
 	DEFINE(VCPU_CR, offsetof(struct kvm_vcpu, arch.cr));
@@ -369,7 +372,7 @@ int main(void)
 	DEFINE(VCPU_SPRG5, offsetof(struct kvm_vcpu, arch.sprg5));
 	DEFINE(VCPU_SPRG6, offsetof(struct kvm_vcpu, arch.sprg6));
 	DEFINE(VCPU_SPRG7, offsetof(struct kvm_vcpu, arch.sprg7));
-	DEFINE(VCPU_PID, offsetof(struct kvm_vcpu, arch.pid));
+	DEFINE(VCPU_SHADOW_PID, offsetof(struct kvm_vcpu, arch.shadow_pid));
 
 	DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst));
 	DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear));
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index d8f0329..26e5863 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -442,28 +442,26 @@ void btext_drawtext(const char *c, unsigned int len)
 
 void btext_drawhex(unsigned long v)
 {
-	char *hex_table = "0123456789abcdef";
-
 	if (!boot_text_mapped)
 		return;
 #ifdef CONFIG_PPC64
-	btext_drawchar(hex_table[(v >> 60) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 56) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 52) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 48) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 44) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 40) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 36) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 32) & 0x0000000FUL]);
+	btext_drawchar(hex_asc_hi(v >> 56));
+	btext_drawchar(hex_asc_lo(v >> 56));
+	btext_drawchar(hex_asc_hi(v >> 48));
+	btext_drawchar(hex_asc_lo(v >> 48));
+	btext_drawchar(hex_asc_hi(v >> 40));
+	btext_drawchar(hex_asc_lo(v >> 40));
+	btext_drawchar(hex_asc_hi(v >> 32));
+	btext_drawchar(hex_asc_lo(v >> 32));
 #endif
-	btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 16) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 12) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  8) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  4) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  0) & 0x0000000FUL]);
+	btext_drawchar(hex_asc_hi(v >> 24));
+	btext_drawchar(hex_asc_lo(v >> 24));
+	btext_drawchar(hex_asc_hi(v >> 16));
+	btext_drawchar(hex_asc_lo(v >> 16));
+	btext_drawchar(hex_asc_hi(v >> 8));
+	btext_drawchar(hex_asc_lo(v >> 8));
+	btext_drawchar(hex_asc_hi(v));
+	btext_drawchar(hex_asc_lo(v));
 	btext_drawchar(' ');
 }
 
diff --git a/arch/powerpc/kernel/cpu_setup_ppc970.S b/arch/powerpc/kernel/cpu_setup_ppc970.S
index bf118c3..27f2507 100644
--- a/arch/powerpc/kernel/cpu_setup_ppc970.S
+++ b/arch/powerpc/kernel/cpu_setup_ppc970.S
@@ -110,7 +110,7 @@ load_hids:
 	isync
 
 	/* Save away cpu state */
-	LOAD_REG_IMMEDIATE(r5,cpu_state_storage)
+	LOAD_REG_ADDR(r5,cpu_state_storage)
 
 	/* Save HID0,1,4 and 5 */
 	mfspr	r3,SPRN_HID0
@@ -134,7 +134,7 @@ _GLOBAL(__restore_cpu_ppc970)
 	rldicl.	r0,r0,4,63
 	beqlr
 
-	LOAD_REG_IMMEDIATE(r5,cpu_state_storage)
+	LOAD_REG_ADDR(r5,cpu_state_storage)
 	/* Before accessing memory, we make sure rm_ci is clear */
 	li	r0,0
 	mfspr	r3,SPRN_HID4
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 25c273c..b1eb834 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -610,6 +610,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_750cx,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
@@ -623,6 +624,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_750cx,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
@@ -636,6 +638,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_750cx,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
@@ -649,6 +652,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_750,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
@@ -662,6 +666,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_750,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
@@ -675,6 +680,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_750,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
@@ -688,6 +694,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_750,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
@@ -701,6 +708,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_750fx,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
@@ -714,6 +722,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_750fx,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
@@ -727,6 +736,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_750,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
@@ -741,6 +751,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_7400,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7400",
@@ -755,6 +766,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_7400,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7400",
@@ -769,6 +781,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_7410,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7400",
@@ -783,6 +796,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -799,6 +813,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -815,6 +830,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -831,6 +847,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -847,6 +864,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -863,6 +881,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -879,6 +898,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -895,6 +915,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -910,6 +931,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -926,6 +948,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -942,6 +965,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
 		.oprofile_type		= PPC_OPROFILE_G4,
@@ -1253,6 +1277,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_4xx,
 		.platform		= "ppc405",
 	},
+	{
+		/* 405EZ */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x41510000,
+		.cpu_name		= "405EZ",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
 	{	/* default match */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index a323c9b..19671ac 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -27,6 +27,10 @@
 #define DBG(fmt...)
 #endif
 
+/* Stores the physical address of elf header of crash image. */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+
+#ifndef CONFIG_RELOCATABLE
 void __init reserve_kdump_trampoline(void)
 {
 	lmb_reserve(0, KDUMP_RESERVE_LIMIT);
@@ -65,8 +69,13 @@ void __init setup_kdump_trampoline(void)
 
 	DBG(" <- setup_kdump_trampoline()\n");
 }
+#endif /* CONFIG_RELOCATABLE */
 
-#ifdef CONFIG_PROC_VMCORE
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
 static int __init parse_elfcorehdr(char *p)
 {
 	if (p)
@@ -75,7 +84,6 @@ static int __init parse_elfcorehdr(char *p)
 	return 1;
 }
 __setup("elfcorehdr=", parse_elfcorehdr);
-#endif
 
 static int __init parse_savemaxmem(char *p)
 {
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
new file mode 100644
index 0000000..49248f8
--- /dev/null
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
+ *
+ * Provide default implementations of the DMA mapping callbacks for
+ * busses using the iommu infrastructure
+ */
+
+#include <asm/iommu.h>
+
+/*
+ * Generic iommu implementation
+ */
+
+/* Allocates a contiguous real buffer and creates mappings over it.
+ * Returns the virtual address of the buffer and sets dma_handle
+ * to the dma address (mapping) of the first page.
+ */
+static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
+				      dma_addr_t *dma_handle, gfp_t flag)
+{
+	return iommu_alloc_coherent(dev, dev->archdata.dma_data, size,
+				    dma_handle, device_to_mask(dev), flag,
+				    dev_to_node(dev));
+}
+
+static void dma_iommu_free_coherent(struct device *dev, size_t size,
+				    void *vaddr, dma_addr_t dma_handle)
+{
+	iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle);
+}
+
+/* Creates TCEs for a user provided buffer.  The user buffer must be
+ * contiguous real kernel storage (not vmalloc).  The address of the buffer
+ * passed here is the kernel (virtual) address of the buffer.  The buffer
+ * need not be page aligned, the dma_addr_t returned will point to the same
+ * byte within the page as vaddr.
+ */
+static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr,
+				       size_t size,
+				       enum dma_data_direction direction,
+				       struct dma_attrs *attrs)
+{
+	return iommu_map_single(dev, dev->archdata.dma_data, vaddr, size,
+				device_to_mask(dev), direction, attrs);
+}
+
+
+static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle,
+				   size_t size,
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
+{
+	iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction,
+			   attrs);
+}
+
+
+static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
+			    int nelems, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
+{
+	return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
+			    device_to_mask(dev), direction, attrs);
+}
+
+static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
+		int nelems, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
+		       attrs);
+}
+
+/* We support DMA to/from any memory page via the iommu */
+static int dma_iommu_dma_supported(struct device *dev, u64 mask)
+{
+	struct iommu_table *tbl = dev->archdata.dma_data;
+
+	if (!tbl || tbl->it_offset > mask) {
+		printk(KERN_INFO
+		       "Warning: IOMMU offset too big for device mask\n");
+		if (tbl)
+			printk(KERN_INFO
+			       "mask: 0x%08lx, table offset: 0x%08lx\n",
+				mask, tbl->it_offset);
+		else
+			printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
+				mask);
+		return 0;
+	} else
+		return 1;
+}
+
+struct dma_mapping_ops dma_iommu_ops = {
+	.alloc_coherent	= dma_iommu_alloc_coherent,
+	.free_coherent	= dma_iommu_free_coherent,
+	.map_single	= dma_iommu_map_single,
+	.unmap_single	= dma_iommu_unmap_single,
+	.map_sg		= dma_iommu_map_sg,
+	.unmap_sg	= dma_iommu_unmap_sg,
+	.dma_supported	= dma_iommu_dma_supported,
+};
+EXPORT_SYMBOL(dma_iommu_ops);
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
new file mode 100644
index 0000000..1562daf
--- /dev/null
+++ b/arch/powerpc/kernel/dma.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
+ *
+ * Provide default implementations of the DMA mapping callbacks for
+ * directly mapped busses.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <asm/bug.h>
+#include <asm/abs_addr.h>
+
+/*
+ * Generic direct DMA implementation
+ *
+ * This implementation supports a per-device offset that can be applied if
+ * the address at which memory is visible to devices is not 0. Platform code
+ * can set archdata.dma_data to an unsigned long holding the offset. By
+ * default the offset is PCI_DRAM_OFFSET.
+ */
+
+static unsigned long get_dma_direct_offset(struct device *dev)
+{
+	if (dev)
+		return (unsigned long)dev->archdata.dma_data;
+
+	return PCI_DRAM_OFFSET;
+}
+
+void *dma_direct_alloc_coherent(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag)
+{
+	void *ret;
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	ret = __dma_alloc_coherent(size, dma_handle, flag);
+	if (ret == NULL)
+		return NULL;
+	*dma_handle += get_dma_direct_offset(dev);
+	return ret;
+#else
+	struct page *page;
+	int node = dev_to_node(dev);
+
+	/* ignore region specifiers */
+	flag  &= ~(__GFP_HIGHMEM);
+
+	page = alloc_pages_node(node, flag, get_order(size));
+	if (page == NULL)
+		return NULL;
+	ret = page_address(page);
+	memset(ret, 0, size);
+	*dma_handle = virt_to_abs(ret) + get_dma_direct_offset(dev);
+
+	return ret;
+#endif
+}
+
+void dma_direct_free_coherent(struct device *dev, size_t size,
+			      void *vaddr, dma_addr_t dma_handle)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	__dma_free_coherent(size, vaddr);
+#else
+	free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
+			     int nents, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sgl, sg, nents, i) {
+		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
+		sg->dma_length = sg->length;
+	}
+
+	return nents;
+}
+
+static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs)
+{
+}
+
+static int dma_direct_dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PPC64
+	/* Could be improved to check for memory though it better be
+	 * done via some global so platforms can set the limit in case
+	 * they have limited DMA windows
+	 */
+	return mask >= DMA_32BIT_MASK;
+#else
+	return 1;
+#endif
+}
+
+static inline dma_addr_t dma_direct_map_page(struct device *dev,
+					     struct page *page,
+					     unsigned long offset,
+					     size_t size,
+					     enum dma_data_direction dir,
+					     struct dma_attrs *attrs)
+{
+	BUG_ON(dir == DMA_NONE);
+	__dma_sync_page(page, offset, size, dir);
+	return page_to_phys(page) + offset + get_dma_direct_offset(dev);
+}
+
+static inline void dma_direct_unmap_page(struct device *dev,
+					 dma_addr_t dma_address,
+					 size_t size,
+					 enum dma_data_direction direction,
+					 struct dma_attrs *attrs)
+{
+}
+
+struct dma_mapping_ops dma_direct_ops = {
+	.alloc_coherent	= dma_direct_alloc_coherent,
+	.free_coherent	= dma_direct_free_coherent,
+	.map_sg		= dma_direct_map_sg,
+	.unmap_sg	= dma_direct_unmap_sg,
+	.dma_supported	= dma_direct_dma_supported,
+	.map_page	= dma_direct_map_page,
+	.unmap_page	= dma_direct_unmap_page,
+};
+EXPORT_SYMBOL(dma_direct_ops);
diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c
deleted file mode 100644
index ae5708e..0000000
--- a/arch/powerpc/kernel/dma_64.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
- *
- * Provide default implementations of the DMA mapping callbacks for
- * directly mapped busses and busses using the iommu infrastructure
- */
-
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <asm/bug.h>
-#include <asm/iommu.h>
-#include <asm/abs_addr.h>
-
-/*
- * Generic iommu implementation
- */
-
-/* Allocates a contiguous real buffer and creates mappings over it.
- * Returns the virtual address of the buffer and sets dma_handle
- * to the dma address (mapping) of the first page.
- */
-static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
-				      dma_addr_t *dma_handle, gfp_t flag)
-{
-	return iommu_alloc_coherent(dev, dev->archdata.dma_data, size,
-				    dma_handle, device_to_mask(dev), flag,
-				    dev->archdata.numa_node);
-}
-
-static void dma_iommu_free_coherent(struct device *dev, size_t size,
-				    void *vaddr, dma_addr_t dma_handle)
-{
-	iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle);
-}
-
-/* Creates TCEs for a user provided buffer.  The user buffer must be
- * contiguous real kernel storage (not vmalloc).  The address of the buffer
- * passed here is the kernel (virtual) address of the buffer.  The buffer
- * need not be page aligned, the dma_addr_t returned will point to the same
- * byte within the page as vaddr.
- */
-static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr,
-				       size_t size,
-				       enum dma_data_direction direction,
-				       struct dma_attrs *attrs)
-{
-	return iommu_map_single(dev, dev->archdata.dma_data, vaddr, size,
-				device_to_mask(dev), direction, attrs);
-}
-
-
-static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle,
-				   size_t size,
-				   enum dma_data_direction direction,
-				   struct dma_attrs *attrs)
-{
-	iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction,
-			   attrs);
-}
-
-
-static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
-			    int nelems, enum dma_data_direction direction,
-			    struct dma_attrs *attrs)
-{
-	return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
-			    device_to_mask(dev), direction, attrs);
-}
-
-static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
-		int nelems, enum dma_data_direction direction,
-		struct dma_attrs *attrs)
-{
-	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
-		       attrs);
-}
-
-/* We support DMA to/from any memory page via the iommu */
-static int dma_iommu_dma_supported(struct device *dev, u64 mask)
-{
-	struct iommu_table *tbl = dev->archdata.dma_data;
-
-	if (!tbl || tbl->it_offset > mask) {
-		printk(KERN_INFO
-		       "Warning: IOMMU offset too big for device mask\n");
-		if (tbl)
-			printk(KERN_INFO
-			       "mask: 0x%08lx, table offset: 0x%08lx\n",
-				mask, tbl->it_offset);
-		else
-			printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
-				mask);
-		return 0;
-	} else
-		return 1;
-}
-
-struct dma_mapping_ops dma_iommu_ops = {
-	.alloc_coherent	= dma_iommu_alloc_coherent,
-	.free_coherent	= dma_iommu_free_coherent,
-	.map_single	= dma_iommu_map_single,
-	.unmap_single	= dma_iommu_unmap_single,
-	.map_sg		= dma_iommu_map_sg,
-	.unmap_sg	= dma_iommu_unmap_sg,
-	.dma_supported	= dma_iommu_dma_supported,
-};
-EXPORT_SYMBOL(dma_iommu_ops);
-
-/*
- * Generic direct DMA implementation
- *
- * This implementation supports a per-device offset that can be applied if
- * the address at which memory is visible to devices is not 0. Platform code
- * can set archdata.dma_data to an unsigned long holding the offset. By
- * default the offset is zero.
- */
-
-static unsigned long get_dma_direct_offset(struct device *dev)
-{
-	return (unsigned long)dev->archdata.dma_data;
-}
-
-static void *dma_direct_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag)
-{
-	struct page *page;
-	void *ret;
-	int node = dev->archdata.numa_node;
-
-	page = alloc_pages_node(node, flag, get_order(size));
-	if (page == NULL)
-		return NULL;
-	ret = page_address(page);
-	memset(ret, 0, size);
-	*dma_handle = virt_to_abs(ret) + get_dma_direct_offset(dev);
-
-	return ret;
-}
-
-static void dma_direct_free_coherent(struct device *dev, size_t size,
-				     void *vaddr, dma_addr_t dma_handle)
-{
-	free_pages((unsigned long)vaddr, get_order(size));
-}
-
-static dma_addr_t dma_direct_map_single(struct device *dev, void *ptr,
-					size_t size,
-					enum dma_data_direction direction,
-					struct dma_attrs *attrs)
-{
-	return virt_to_abs(ptr) + get_dma_direct_offset(dev);
-}
-
-static void dma_direct_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction,
-				    struct dma_attrs *attrs)
-{
-}
-
-static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
-			     int nents, enum dma_data_direction direction,
-			     struct dma_attrs *attrs)
-{
-	struct scatterlist *sg;
-	int i;
-
-	for_each_sg(sgl, sg, nents, i) {
-		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
-		sg->dma_length = sg->length;
-	}
-
-	return nents;
-}
-
-static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction,
-				struct dma_attrs *attrs)
-{
-}
-
-static int dma_direct_dma_supported(struct device *dev, u64 mask)
-{
-	/* Could be improved to check for memory though it better be
-	 * done via some global so platforms can set the limit in case
-	 * they have limited DMA windows
-	 */
-	return mask >= DMA_32BIT_MASK;
-}
-
-struct dma_mapping_ops dma_direct_ops = {
-	.alloc_coherent	= dma_direct_alloc_coherent,
-	.free_coherent	= dma_direct_free_coherent,
-	.map_single	= dma_direct_map_single,
-	.unmap_single	= dma_direct_unmap_single,
-	.map_sg		= dma_direct_map_sg,
-	.unmap_sg	= dma_direct_unmap_sg,
-	.dma_supported	= dma_direct_dma_supported,
-};
-EXPORT_SYMBOL(dma_direct_ops);
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 2d802e9..fd8b4ba 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -512,31 +512,12 @@ _GLOBAL(ret_from_except_lite)
 #endif
 
 restore:
-	ld	r5,SOFTE(r1)
-#ifdef CONFIG_PPC_ISERIES
 BEGIN_FW_FTR_SECTION
-	cmpdi	0,r5,0
-	beq	4f
-	/* Check for pending interrupts (iSeries) */
-	ld	r3,PACALPPACAPTR(r13)
-	ld	r3,LPPACAANYINT(r3)
-	cmpdi	r3,0
-	beq+	4f			/* skip do_IRQ if no interrupts */
-
-	li	r3,0
-	stb	r3,PACASOFTIRQEN(r13)	/* ensure we are soft-disabled */
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	.trace_hardirqs_off
-	mfmsr	r10
-#endif
-	ori	r10,r10,MSR_EE
-	mtmsrd	r10			/* hard-enable again */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_IRQ
-	b	.ret_from_except_lite		/* loop back and handle more */
-4:
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
+	ld	r5,SOFTE(r1)
+FW_FTR_SECTION_ELSE
+	b	iseries_check_pending_irqs
+ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
+2:
 	TRACE_AND_RESTORE_IRQ(r5);
 
 	/* extract EE bit and use it to restore paca->hard_enabled */
@@ -592,6 +573,30 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 	rfid
 	b	.	/* prevent speculative execution */
 
+iseries_check_pending_irqs:
+#ifdef CONFIG_PPC_ISERIES
+	ld	r5,SOFTE(r1)
+	cmpdi	0,r5,0
+	beq	2b
+	/* Check for pending interrupts (iSeries) */
+	ld	r3,PACALPPACAPTR(r13)
+	ld	r3,LPPACAANYINT(r3)
+	cmpdi	r3,0
+	beq+	2b			/* skip do_IRQ if no interrupts */
+
+	li	r3,0
+	stb	r3,PACASOFTIRQEN(r13)	/* ensure we are soft-disabled */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	.trace_hardirqs_off
+	mfmsr	r10
+#endif
+	ori	r10,r10,MSR_EE
+	mtmsrd	r10			/* hard-enable again */
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.do_IRQ
+	b	.ret_from_except_lite		/* loop back and handle more */
+#endif
+
 do_work:
 #ifdef CONFIG_PREEMPT
 	andi.	r0,r3,MSR_PR	/* Returning to user mode? */
@@ -685,10 +690,6 @@ _GLOBAL(enter_rtas)
 	std	r7,_DAR(r1)
 	mfdsisr	r8
 	std	r8,_DSISR(r1)
-	mfsrr0	r9
-	std	r9,_SRR0(r1)
-	mfsrr1	r10
-	std	r10,_SRR1(r1)
 
 	/* Temporary workaround to clear CR until RTAS can be modified to
 	 * ignore all bits.
@@ -749,6 +750,10 @@ _STATIC(rtas_return_loc)
 	mfspr	r4,SPRN_SPRG3	        /* Get PACA */
 	clrldi	r4,r4,2			/* convert to realmode address */
 
+	bcl	20,31,$+4
+0:	mflr	r3
+	ld	r3,(1f-0b)(r3)		/* get &.rtas_restore_regs */
+
 	mfmsr   r6
 	li	r0,MSR_RI
 	andc	r6,r6,r0
@@ -756,7 +761,6 @@ _STATIC(rtas_return_loc)
 	mtmsrd  r6
         
         ld	r1,PACAR1(r4)           /* Restore our SP */
-	LOAD_REG_IMMEDIATE(r3,.rtas_restore_regs)
         ld	r4,PACASAVEDMSR(r4)     /* Restore our MSR */
 
 	mtspr	SPRN_SRR0,r3
@@ -764,6 +768,9 @@ _STATIC(rtas_return_loc)
 	rfid
 	b	.	/* prevent speculative execution */
 
+	.align	3
+1:	.llong	.rtas_restore_regs
+
 _STATIC(rtas_restore_regs)
 	/* relocation is on at this point */
 	REST_GPR(2, r1)			/* Restore the TOC */
@@ -783,10 +790,6 @@ _STATIC(rtas_restore_regs)
 	mtdar	r7
 	ld	r8,_DSISR(r1)
 	mtdsisr	r8
-	ld	r9,_SRR0(r1)
-	mtsrr0	r9
-	ld	r10,_SRR1(r1)
-	mtsrr1	r10
 
         addi	r1,r1,RTAS_FRAME_SIZE	/* Unstack our frame */
 	ld	r0,16(r1)		/* get return address */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 8bb6575..0c32682 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -110,6 +110,12 @@ __start:
 #ifdef CONFIG_PPC_MULTIPLATFORM
 	cmpwi	0,r5,0
 	beq	1f
+
+	/* find out where we are now */
+	bcl	20,31,$+4
+0:	mflr	r8			/* r8 = runtime addr here */
+	addis	r8,r8,(_stext - 0b)@ha
+	addi	r8,r8,(_stext - 0b)@l	/* current runtime base addr */
 	bl	prom_init
 	trap
 #endif
@@ -369,13 +375,13 @@ i##n:								\
 DataAccess:
 	EXCEPTION_PROLOG
 	mfspr	r10,SPRN_DSISR
+	stw	r10,_DSISR(r11)
 	andis.	r0,r10,0xa470		/* weird error? */
 	bne	1f			/* if not, try to put a PTE */
 	mfspr	r4,SPRN_DAR		/* into the hash table */
 	rlwinm	r3,r10,32-15,21,21	/* DSISR_STORE -> _PAGE_RW */
 	bl	hash_page
-1:	stw	r10,_DSISR(r11)
-	mr	r5,r10
+1:	lwz	r5,_DSISR(r11)		/* get DSISR value */
 	mfspr	r4,SPRN_DAR
 	EXC_XFER_EE_LITE(0x300, handle_page_fault)
 
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index cc8fb47..69489bd 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -82,7 +82,11 @@ END_FTR_SECTION(0, 1)
 	/* Catch branch to 0 in real mode */
 	trap
 
-	/* Secondary processors spin on this value until it goes to 1. */
+	/* Secondary processors spin on this value until it becomes nonzero.
+	 * When it does it contains the real address of the descriptor
+	 * of the function that the cpu should jump to to continue
+	 * initialization.
+	 */
 	.globl  __secondary_hold_spinloop
 __secondary_hold_spinloop:
 	.llong	0x0
@@ -93,6 +97,12 @@ __secondary_hold_spinloop:
 __secondary_hold_acknowledge:
 	.llong	0x0
 
+	/* This flag is set by purgatory if we should be a kdump kernel. */
+	/* Do not move this variable as purgatory knows about it. */
+	.globl	__kdump_flag
+__kdump_flag:
+	.llong	0x0
+
 #ifdef CONFIG_PPC_ISERIES
 	/*
 	 * At offset 0x20, there is a pointer to iSeries LPAR data.
@@ -109,8 +119,11 @@ __secondary_hold_acknowledge:
  * before the bulk of the kernel has been relocated.  This code
  * is relocated to physical address 0x60 before prom_init is run.
  * All of it must fit below the first exception vector at 0x100.
+ * Use .globl here not _GLOBAL because we want __secondary_hold
+ * to be the actual text address, not a descriptor.
  */
-_GLOBAL(__secondary_hold)
+	.globl	__secondary_hold
+__secondary_hold:
 	mfmsr	r24
 	ori	r24,r24,MSR_RI
 	mtmsrd	r24			/* RI on */
@@ -121,16 +134,16 @@ _GLOBAL(__secondary_hold)
 	/* Tell the master cpu we're here */
 	/* Relocation is off & we are located at an address less */
 	/* than 0x100, so only need to grab low order offset.    */
-	std	r24,__secondary_hold_acknowledge@l(0)
+	std	r24,__secondary_hold_acknowledge-_stext(0)
 	sync
 
 	/* All secondary cpus wait here until told to start. */
-100:	ld	r4,__secondary_hold_spinloop@l(0)
-	cmpdi	0,r4,1
-	bne	100b
+100:	ld	r4,__secondary_hold_spinloop-_stext(0)
+	cmpdi	0,r4,0
+	beq	100b
 
 #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
-	LOAD_REG_IMMEDIATE(r4, .generic_secondary_smp_init)
+	ld	r4,0(r4)		/* deref function descriptor */
 	mtctr	r4
 	mr	r3,r24
 	bctr
@@ -147,6 +160,10 @@ exception_marker:
 /*
  * This is the start of the interrupt handlers for pSeries
  * This code runs with relocation off.
+ * Code from here to __end_interrupts gets copied down to real
+ * address 0x100 when we are running a relocatable kernel.
+ * Therefore any relative branches in this section must only
+ * branch to labels in this section.
  */
 	. = 0x100
 	.globl __start_interrupts
@@ -200,7 +217,20 @@ data_access_slb_pSeries:
 	mfspr	r10,SPRN_SPRG1
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-	b	.slb_miss_realmode	/* Rel. branch works in real mode */
+#ifndef CONFIG_RELOCATABLE
+	b	.slb_miss_realmode
+#else
+	/*
+	 * We can't just use a direct branch to .slb_miss_realmode
+	 * because the distance from here to there depends on where
+	 * the kernel ends up being put.
+	 */
+	mfctr	r11
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, .slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
 
 	STD_EXCEPTION_PSERIES(0x400, instruction_access)
 
@@ -225,7 +255,15 @@ instruction_access_slb_pSeries:
 	mfspr	r10,SPRN_SPRG1
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-	b	.slb_miss_realmode	/* Rel. branch works in real mode */
+#ifndef CONFIG_RELOCATABLE
+	b	.slb_miss_realmode
+#else
+	mfctr	r11
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, .slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
 
 	MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
 	STD_EXCEPTION_PSERIES(0x600, alignment)
@@ -244,14 +282,12 @@ BEGIN_FTR_SECTION
 	beq-	1f
 END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	mr	r9,r13
-	mfmsr	r10
 	mfspr	r13,SPRN_SPRG3
 	mfspr	r11,SPRN_SRR0
-	clrrdi	r12,r13,32
-	oris	r12,r12,system_call_common@h
-	ori	r12,r12,system_call_common@l
+	ld	r12,PACAKBASE(r13)
+	ld	r10,PACAKMSR(r13)
+	LOAD_HANDLER(r12, system_call_entry)
 	mtspr	SPRN_SRR0,r12
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
 	mfspr	r12,SPRN_SRR1
 	mtspr	SPRN_SRR1,r10
 	rfid
@@ -325,16 +361,32 @@ do_stab_bolted_pSeries:
 	mfspr	r12,SPRN_SPRG2
 	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
 
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Vectors for the FWNMI option.  Share common code.
+ */
+	.globl system_reset_fwnmi
+      .align 7
+system_reset_fwnmi:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+
+	.globl machine_check_fwnmi
+      .align 7
+machine_check_fwnmi:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+#endif /* CONFIG_PPC_PSERIES */
+
+#ifdef __DISABLED__
 /*
- * We have some room here  we use that to put
- * the peries slb miss user trampoline code so it's reasonably
- * away from slb_miss_user_common to avoid problems with rfid
- *
  * This is used for when the SLB miss handler has to go virtual,
  * which doesn't happen for now anymore but will once we re-implement
  * dynamic VSIDs for shared page tables
  */
-#ifdef __DISABLED__
 slb_miss_user_pseries:
 	std	r10,PACA_EXGEN+EX_R10(r13)
 	std	r11,PACA_EXGEN+EX_R11(r13)
@@ -357,25 +409,17 @@ slb_miss_user_pseries:
 	b	.				/* prevent spec. execution */
 #endif /* __DISABLED__ */
 
-#ifdef CONFIG_PPC_PSERIES
+	.align	7
+	.globl	__end_interrupts
+__end_interrupts:
+
 /*
- * Vectors for the FWNMI option.  Share common code.
+ * Code from here down to __end_handlers is invoked from the
+ * exception prologs above.  Because the prologs assemble the
+ * addresses of these handlers using the LOAD_HANDLER macro,
+ * which uses an addi instruction, these handlers must be in
+ * the first 32k of the kernel image.
  */
-	.globl system_reset_fwnmi
-      .align 7
-system_reset_fwnmi:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXGEN, system_reset_common)
-
-	.globl machine_check_fwnmi
-      .align 7
-machine_check_fwnmi:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXMC, machine_check_common)
-
-#endif /* CONFIG_PPC_PSERIES */
 
 /*** Common interrupt handlers ***/
 
@@ -414,6 +458,10 @@ machine_check_common:
 	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
 #endif /* CONFIG_CBE_RAS */
 
+	.align	7
+system_call_entry:
+	b	system_call_common
+
 /*
  * Here we have detected that the kernel stack pointer is bad.
  * R9 contains the saved CR, r13 points to the paca,
@@ -457,65 +505,6 @@ bad_stack:
 	b	1b
 
 /*
- * Return from an exception with minimal checks.
- * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
- * If interrupts have been enabled, or anything has been
- * done that might have changed the scheduling status of
- * any task or sent any task a signal, you should use
- * ret_from_except or ret_from_except_lite instead of this.
- */
-fast_exc_return_irq:			/* restores irq state too */
-	ld	r3,SOFTE(r1)
-	TRACE_AND_RESTORE_IRQ(r3);
-	ld	r12,_MSR(r1)
-	rldicl	r4,r12,49,63		/* get MSR_EE to LSB */
-	stb	r4,PACAHARDIRQEN(r13)	/* restore paca->hard_enabled */
-	b	1f
-
-	.globl	fast_exception_return
-fast_exception_return:
-	ld	r12,_MSR(r1)
-1:	ld	r11,_NIP(r1)
-	andi.	r3,r12,MSR_RI		/* check if RI is set */
-	beq-	unrecov_fer
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-	andi.	r3,r12,MSR_PR
-	beq	2f
-	ACCOUNT_CPU_USER_EXIT(r3, r4)
-2:
-#endif
-
-	ld	r3,_CCR(r1)
-	ld	r4,_LINK(r1)
-	ld	r5,_CTR(r1)
-	ld	r6,_XER(r1)
-	mtcr	r3
-	mtlr	r4
-	mtctr	r5
-	mtxer	r6
-	REST_GPR(0, r1)
-	REST_8GPRS(2, r1)
-
-	mfmsr	r10
-	rldicl	r10,r10,48,1		/* clear EE */
-	rldicr	r10,r10,16,61		/* clear RI (LE is 0 already) */
-	mtmsrd	r10,1
-
-	mtspr	SPRN_SRR1,r12
-	mtspr	SPRN_SRR0,r11
-	REST_4GPRS(10, r1)
-	ld	r1,GPR1(r1)
-	rfid
-	b	.	/* prevent speculative execution */
-
-unrecov_fer:
-	bl	.save_nvgprs
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
-	b	1b
-
-/*
  * Here r13 points to the paca, r9 contains the saved CR,
  * SRR0 and SRR1 are saved in r11 and r12,
  * r9 - r13 are saved in paca->exgen.
@@ -616,6 +605,9 @@ unrecov_user_slb:
  */
 _GLOBAL(slb_miss_realmode)
 	mflr	r10
+#ifdef CONFIG_RELOCATABLE
+	mtctr	r11
+#endif
 
 	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
 	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
@@ -666,11 +658,10 @@ BEGIN_FW_FTR_SECTION
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif /* CONFIG_PPC_ISERIES */
 	mfspr	r11,SPRN_SRR0
-	clrrdi	r10,r13,32
+	ld	r10,PACAKBASE(r13)
 	LOAD_HANDLER(r10,unrecov_slb)
 	mtspr	SPRN_SRR0,r10
-	mfmsr	r10
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
+	ld	r10,PACAKMSR(r13)
 	mtspr	SPRN_SRR1,r10
 	rfid
 	b	.
@@ -766,6 +757,85 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	bl	.altivec_unavailable_exception
 	b	.ret_from_except
 
+	.align	7
+	.globl vsx_unavailable_common
+vsx_unavailable_common:
+	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	bne	.load_up_vsx
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.vsx_unavailable_exception
+	b	.ret_from_except
+
+	.align	7
+	.globl	__end_handlers
+__end_handlers:
+
+/*
+ * Return from an exception with minimal checks.
+ * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
+ * If interrupts have been enabled, or anything has been
+ * done that might have changed the scheduling status of
+ * any task or sent any task a signal, you should use
+ * ret_from_except or ret_from_except_lite instead of this.
+ */
+fast_exc_return_irq:			/* restores irq state too */
+	ld	r3,SOFTE(r1)
+	TRACE_AND_RESTORE_IRQ(r3);
+	ld	r12,_MSR(r1)
+	rldicl	r4,r12,49,63		/* get MSR_EE to LSB */
+	stb	r4,PACAHARDIRQEN(r13)	/* restore paca->hard_enabled */
+	b	1f
+
+	.globl	fast_exception_return
+fast_exception_return:
+	ld	r12,_MSR(r1)
+1:	ld	r11,_NIP(r1)
+	andi.	r3,r12,MSR_RI		/* check if RI is set */
+	beq-	unrecov_fer
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	andi.	r3,r12,MSR_PR
+	beq	2f
+	ACCOUNT_CPU_USER_EXIT(r3, r4)
+2:
+#endif
+
+	ld	r3,_CCR(r1)
+	ld	r4,_LINK(r1)
+	ld	r5,_CTR(r1)
+	ld	r6,_XER(r1)
+	mtcr	r3
+	mtlr	r4
+	mtctr	r5
+	mtxer	r6
+	REST_GPR(0, r1)
+	REST_8GPRS(2, r1)
+
+	mfmsr	r10
+	rldicl	r10,r10,48,1		/* clear EE */
+	rldicr	r10,r10,16,61		/* clear RI (LE is 0 already) */
+	mtmsrd	r10,1
+
+	mtspr	SPRN_SRR1,r12
+	mtspr	SPRN_SRR0,r11
+	REST_4GPRS(10, r1)
+	ld	r1,GPR1(r1)
+	rfid
+	b	.	/* prevent speculative execution */
+
+unrecov_fer:
+	bl	.save_nvgprs
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.unrecoverable_exception
+	b	1b
+
 #ifdef CONFIG_ALTIVEC
 /*
  * load_up_altivec(unused, unused, tsk)
@@ -840,22 +910,6 @@ _STATIC(load_up_altivec)
 	blr
 #endif /* CONFIG_ALTIVEC */
 
-	.align	7
-	.globl vsx_unavailable_common
-vsx_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	bne	.load_up_vsx
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.vsx_unavailable_exception
-	b	.ret_from_except
-
 #ifdef CONFIG_VSX
 /*
  * load_up_vsx(unused, unused, tsk)
@@ -1175,11 +1229,14 @@ _GLOBAL(generic_secondary_smp_init)
 	/* turn on 64-bit mode */
 	bl	.enable_64b_mode
 
+	/* get the TOC pointer (real address) */
+	bl	.relative_toc
+
 	/* Set up a paca value for this processor. Since we have the
 	 * physical cpu id in r24, we need to search the pacas to find
 	 * which logical id maps to our physical one.
 	 */
-	LOAD_REG_IMMEDIATE(r13, paca)	/* Get base vaddr of paca array	 */
+	LOAD_REG_ADDR(r13, paca)	/* Get base vaddr of paca array	 */
 	li	r5,0			/* logical cpu id                */
 1:	lhz	r6,PACAHWCPUID(r13)	/* Load HW procid from paca      */
 	cmpw	r6,r24			/* Compare to our id             */
@@ -1208,7 +1265,7 @@ _GLOBAL(generic_secondary_smp_init)
 	sync				/* order paca.run and cur_cpu_spec */
 
 	/* See if we need to call a cpu state restore handler */
-	LOAD_REG_IMMEDIATE(r23, cur_cpu_spec)
+	LOAD_REG_ADDR(r23, cur_cpu_spec)
 	ld	r23,0(r23)
 	ld	r23,CPU_SPEC_RESTORE(r23)
 	cmpdi	0,r23,0
@@ -1224,10 +1281,15 @@ _GLOBAL(generic_secondary_smp_init)
 	b	__secondary_start
 #endif
 
+/*
+ * Turn the MMU off.
+ * Assumes we're mapped EA == RA if the MMU is on.
+ */
 _STATIC(__mmu_off)
 	mfmsr	r3
 	andi.	r0,r3,MSR_IR|MSR_DR
 	beqlr
+	mflr	r4
 	andc	r3,r3,r0
 	mtspr	SPRN_SRR0,r4
 	mtspr	SPRN_SRR1,r3
@@ -1248,6 +1310,18 @@ _STATIC(__mmu_off)
  *
  */
 _GLOBAL(__start_initialization_multiplatform)
+	/* Make sure we are running in 64 bits mode */
+	bl	.enable_64b_mode
+
+	/* Get TOC pointer (current runtime address) */
+	bl	.relative_toc
+
+	/* find out where we are now */
+	bcl	20,31,$+4
+0:	mflr	r26			/* r26 = runtime addr here */
+	addis	r26,r26,(_stext - 0b)@ha
+	addi	r26,r26,(_stext - 0b)@l	/* current runtime base addr */
+
 	/*
 	 * Are we booted from a PROM Of-type client-interface ?
 	 */
@@ -1259,9 +1333,6 @@ _GLOBAL(__start_initialization_multiplatform)
 	mr	r31,r3
 	mr	r30,r4
 
-	/* Make sure we are running in 64 bits mode */
-	bl	.enable_64b_mode
-
 	/* Setup some critical 970 SPRs before switching MMU off */
 	mfspr	r0,SPRN_PVR
 	srwi	r0,r0,16
@@ -1276,9 +1347,7 @@ _GLOBAL(__start_initialization_multiplatform)
 1:	bl	.__cpu_preinit_ppc970
 2:
 
-	/* Switch off MMU if not already */
-	LOAD_REG_IMMEDIATE(r4, .__after_prom_start - KERNELBASE)
-	add	r4,r4,r30
+	/* Switch off MMU if not already off */
 	bl	.__mmu_off
 	b	.__after_prom_start
 
@@ -1293,22 +1362,15 @@ _INIT_STATIC(__boot_from_prom)
 	/*
 	 * Align the stack to 16-byte boundary
 	 * Depending on the size and layout of the ELF sections in the initial
-	 * boot binary, the stack pointer will be unalignet on PowerMac
+	 * boot binary, the stack pointer may be unaligned on PowerMac
 	 */
 	rldicr	r1,r1,0,59
 
-	/* Make sure we are running in 64 bits mode */
-	bl	.enable_64b_mode
-
-	/* put a relocation offset into r3 */
-	bl	.reloc_offset
-
-	LOAD_REG_IMMEDIATE(r2,__toc_start)
-	addi	r2,r2,0x4000
-	addi	r2,r2,0x4000
-
-	/* Relocate the TOC from a virt addr to a real addr */
-	add	r2,r2,r3
+#ifdef CONFIG_RELOCATABLE
+	/* Relocate code for where we are now */
+	mr	r3,r26
+	bl	.relocate
+#endif
 
 	/* Restore parameters */
 	mr	r3,r31
@@ -1318,60 +1380,72 @@ _INIT_STATIC(__boot_from_prom)
 	mr	r7,r27
 
 	/* Do all of the interaction with OF client interface */
+	mr	r8,r26
 	bl	.prom_init
 	/* We never return */
 	trap
 
 _STATIC(__after_prom_start)
+#ifdef CONFIG_RELOCATABLE
+	/* process relocations for the final address of the kernel */
+	lis	r25,PAGE_OFFSET@highest	/* compute virtual base of kernel */
+	sldi	r25,r25,32
+#ifdef CONFIG_CRASH_DUMP
+	ld	r7,__kdump_flag-_stext(r26)
+	cmpldi	cr0,r7,1	/* kdump kernel ? - stay where we are */
+	bne	1f
+	add	r25,r25,r26
+#endif
+1:	mr	r3,r25
+	bl	.relocate
+#endif
 
 /*
- * We need to run with __start at physical address PHYSICAL_START.
+ * We need to run with _stext at physical address PHYSICAL_START.
  * This will leave some code in the first 256B of
  * real memory, which are reserved for software use.
- * The remainder of the first page is loaded with the fixed
- * interrupt vectors.  The next two pages are filled with
- * unknown exception placeholders.
  *
  * Note: This process overwrites the OF exception vectors.
- *	r26 == relocation offset
- *	r27 == KERNELBASE
  */
-	bl	.reloc_offset
-	mr	r26,r3
-	LOAD_REG_IMMEDIATE(r27, KERNELBASE)
-
-	LOAD_REG_IMMEDIATE(r3, PHYSICAL_START)	/* target addr */
-
-	// XXX FIXME: Use phys returned by OF (r30)
-	add	r4,r27,r26 		/* source addr			 */
-					/* current address of _start	 */
-					/*   i.e. where we are running	 */
-					/*	the source addr		 */
-
-	cmpdi	r4,0			/* In some cases the loader may  */
-	bne	1f
-	b	.start_here_multiplatform /* have already put us at zero */
-					/* so we can skip the copy.      */
-1:	LOAD_REG_IMMEDIATE(r5,copy_to_here) /* # bytes of memory to copy */
-	sub	r5,r5,r27
-
+	li	r3,0			/* target addr */
+	mr.	r4,r26			/* In some cases the loader may  */
+	beq	9f			/* have already put us at zero */
 	li	r6,0x100		/* Start offset, the first 0x100 */
 					/* bytes were copied earlier.	 */
 
+#ifdef CONFIG_CRASH_DUMP
+/*
+ * Check if the kernel has to be running as relocatable kernel based on the
+ * variable __kdump_flag, if it is set the kernel is treated as relocatable
+ * kernel, otherwise it will be moved to PHYSICAL_START
+ */
+	ld	r7,__kdump_flag-_stext(r26)
+	cmpldi	cr0,r7,1
+	bne	3f
+
+	li	r5,__end_interrupts - _stext	/* just copy interrupts */
+	b	5f
+3:
+#endif
+	lis	r5,(copy_to_here - _stext)@ha
+	addi	r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
+
 	bl	.copy_and_flush		/* copy the first n bytes	 */
 					/* this includes the code being	 */
 					/* executed here.		 */
-
-	LOAD_REG_IMMEDIATE(r0, 4f)	/* Jump to the copy of this code */
-	mtctr	r0			/* that we just made/relocated	 */
+	addis	r8,r3,(4f - _stext)@ha	/* Jump to the copy of this code */
+	addi	r8,r8,(4f - _stext)@l	/* that we just made */
+	mtctr	r8
 	bctr
 
-4:	LOAD_REG_IMMEDIATE(r5,klimit)
-	add	r5,r5,r26
-	ld	r5,0(r5)		/* get the value of klimit */
-	sub	r5,r5,r27
-	bl	.copy_and_flush		/* copy the rest */
-	b	.start_here_multiplatform
+p_end:	.llong	_end - _stext
+
+4:	/* Now copy the rest of the kernel up to _end */
+	addis	r5,r26,(p_end - _stext)@ha
+	ld	r5,(p_end - _stext)@l(r5)	/* get _end */
+5:	bl	.copy_and_flush		/* copy the rest */
+
+9:	b	.start_here_multiplatform
 
 /*
  * Copy routine used to copy the kernel to start at physical address 0
@@ -1436,6 +1510,9 @@ _GLOBAL(pmac_secondary_start)
 	/* turn on 64-bit mode */
 	bl	.enable_64b_mode
 
+	/* get TOC pointer (real address) */
+	bl	.relative_toc
+
 	/* Copy some CPU settings from CPU 0 */
 	bl	.__restore_cpu_ppc970
 
@@ -1445,10 +1522,10 @@ _GLOBAL(pmac_secondary_start)
 	mtmsrd	r3			/* RI on */
 
 	/* Set up a paca value for this processor. */
-	LOAD_REG_IMMEDIATE(r4, paca)	/* Get base vaddr of paca array	*/
-	mulli	r13,r24,PACA_SIZE	 /* Calculate vaddr of right paca */
+	LOAD_REG_ADDR(r4,paca)		/* Get base vaddr of paca array	*/
+	mulli	r13,r24,PACA_SIZE	/* Calculate vaddr of right paca */
 	add	r13,r13,r4		/* for this processor.		*/
-	mtspr	SPRN_SPRG3,r13		 /* Save vaddr of paca in SPRG3	*/
+	mtspr	SPRN_SPRG3,r13		/* Save vaddr of paca in SPRG3	*/
 
 	/* Create a temp kernel stack for use before relocation is on.	*/
 	ld	r1,PACAEMERGSP(r13)
@@ -1476,9 +1553,6 @@ __secondary_start:
 	/* Set thread priority to MEDIUM */
 	HMT_MEDIUM
 
-	/* Load TOC */
-	ld	r2,PACATOC(r13)
-
 	/* Do early setup for that CPU (stab, slb, hash table pointer) */
 	bl	.early_setup_secondary
 
@@ -1515,9 +1589,11 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
 
 /* 
  * Running with relocation on at this point.  All we want to do is
- * zero the stack back-chain pointer before going into C code.
+ * zero the stack back-chain pointer and get the TOC virtual address
+ * before going into C code.
  */
 _GLOBAL(start_secondary_prolog)
+	ld	r2,PACATOC(r13)
 	li	r3,0
 	std	r3,0(r1)		/* Zero the stack frame pointer	*/
 	bl	.start_secondary
@@ -1529,34 +1605,46 @@ _GLOBAL(start_secondary_prolog)
  */
 _GLOBAL(enable_64b_mode)
 	mfmsr	r11			/* grab the current MSR */
-	li	r12,1
-	rldicr	r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
-	or	r11,r11,r12
-	li	r12,1
-	rldicr	r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
+	li	r12,(MSR_SF | MSR_ISF)@highest
+	sldi	r12,r12,48
 	or	r11,r11,r12
 	mtmsrd	r11
 	isync
 	blr
 
 /*
+ * This puts the TOC pointer into r2, offset by 0x8000 (as expected
+ * by the toolchain).  It computes the correct value for wherever we
+ * are running at the moment, using position-independent code.
+ */
+_GLOBAL(relative_toc)
+	mflr	r0
+	bcl	20,31,$+4
+0:	mflr	r9
+	ld	r2,(p_toc - 0b)(r9)
+	add	r2,r2,r9
+	mtlr	r0
+	blr
+
+p_toc:	.llong	__toc_start + 0x8000 - 0b
+
+/*
  * This is where the main kernel code starts.
  */
 _INIT_STATIC(start_here_multiplatform)
-	/* get a new offset, now that the kernel has moved. */
-	bl	.reloc_offset
-	mr	r26,r3
+	/* set up the TOC (real address) */
+	bl	.relative_toc
 
 	/* Clear out the BSS. It may have been done in prom_init,
 	 * already but that's irrelevant since prom_init will soon
 	 * be detached from the kernel completely. Besides, we need
 	 * to clear it now for kexec-style entry.
 	 */
-	LOAD_REG_IMMEDIATE(r11,__bss_stop)
-	LOAD_REG_IMMEDIATE(r8,__bss_start)
+	LOAD_REG_ADDR(r11,__bss_stop)
+	LOAD_REG_ADDR(r8,__bss_start)
 	sub	r11,r11,r8		/* bss size			*/
 	addi	r11,r11,7		/* round up to an even double word */
-	rldicl. r11,r11,61,3		/* shift right by 3		*/
+	srdi.	r11,r11,3		/* shift right by 3		*/
 	beq	4f
 	addi	r8,r8,-8
 	li	r0,0
@@ -1569,35 +1657,35 @@ _INIT_STATIC(start_here_multiplatform)
 	ori	r6,r6,MSR_RI
 	mtmsrd	r6			/* RI on */
 
-	/* The following gets the stack and TOC set up with the regs */
+#ifdef CONFIG_RELOCATABLE
+	/* Save the physical address we're running at in kernstart_addr */
+	LOAD_REG_ADDR(r4, kernstart_addr)
+	clrldi	r0,r25,2
+	std	r0,0(r4)
+#endif
+
+	/* The following gets the stack set up with the regs */
 	/* pointing to the real addr of the kernel stack.  This is   */
 	/* all done to support the C function call below which sets  */
 	/* up the htab.  This is done because we have relocated the  */
 	/* kernel but are still running in real mode. */
 
-	LOAD_REG_IMMEDIATE(r3,init_thread_union)
-	add	r3,r3,r26
+	LOAD_REG_ADDR(r3,init_thread_union)
 
-	/* set up a stack pointer (physical address) */
+	/* set up a stack pointer */
 	addi	r1,r3,THREAD_SIZE
 	li	r0,0
 	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
 
-	/* set up the TOC (physical address) */
-	LOAD_REG_IMMEDIATE(r2,__toc_start)
-	addi	r2,r2,0x4000
-	addi	r2,r2,0x4000
-	add	r2,r2,r26
-
 	/* Do very early kernel initializations, including initial hash table,
 	 * stab and slb setup before we turn on relocation.	*/
 
 	/* Restore parameters passed from prom_init/kexec */
 	mr	r3,r31
- 	bl	.early_setup
+	bl	.early_setup		/* also sets r13 and SPRG3 */
 
-	LOAD_REG_IMMEDIATE(r3, .start_here_common)
-	LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
+	LOAD_REG_ADDR(r3, .start_here_common)
+	ld	r4,PACAKMSR(r13)
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
 	rfid
@@ -1606,20 +1694,10 @@ _INIT_STATIC(start_here_multiplatform)
 	/* This is where all platforms converge execution */
 _INIT_GLOBAL(start_here_common)
 	/* relocation is on at this point */
+	std	r1,PACAKSAVE(r13)
 
-	/* The following code sets up the SP and TOC now that we are */
-	/* running with translation enabled. */
-
-	LOAD_REG_IMMEDIATE(r3,init_thread_union)
-
-	/* set up the stack */
-	addi	r1,r3,THREAD_SIZE
-	li	r0,0
-	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
-
-	/* Load the TOC */
+	/* Load the TOC (virtual address) */
 	ld	r2,PACATOC(r13)
-	std	r1,PACAKSAVE(r13)
 
 	bl	.setup_system
 
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 3cb52fa..590304c 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -422,7 +422,6 @@ skpinv:	addi	r6,r6,1				/* Increment */
  *   r12 is pointer to the pte
  */
 #ifdef CONFIG_PTE_64BIT
-#define PTE_FLAGS_OFFSET	4
 #define FIND_PTE	\
 	rlwinm	r12, r10, 13, 19, 29;	/* Compute pgdir/pmd offset */	\
 	lwzx	r11, r12, r11;		/* Get pgd/pmd entry */		\
@@ -431,7 +430,6 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	rlwimi	r12, r10, 23, 20, 28;	/* Compute pte address */	\
 	lwz	r11, 4(r12);		/* Get pte entry */
 #else
-#define PTE_FLAGS_OFFSET	0
 #define FIND_PTE	\
 	rlwimi	r11, r10, 12, 20, 29;	/* Create L1 (pgdir/pmd) address */	\
 	lwz	r11, 0(r11);		/* Get L1 entry */			\
@@ -579,13 +577,19 @@ interrupt_base:
 
 	FIND_PTE
 	andc.	r13,r13,r11		/* Check permission */
-	bne	2f			/* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
-	lwz	r13, 0(r12)
+#ifdef CONFIG_SMP
+	subf	r10,r11,r12		/* create false data dep */
+	lwzx	r13,r11,r10		/* Get upper pte bits */
+#else
+	lwz	r13,0(r12)		/* Get upper pte bits */
+#endif
 #endif
 
-	 /* Jump to common tlb load */
+	bne	2f			/* Bail if permission/valid mismach */
+
+	/* Jump to common tlb load */
 	b	finish_tlb_load
 2:
 	/* The bailout.  Restore registers to pre-exception conditions
@@ -640,12 +644,18 @@ interrupt_base:
 
 	FIND_PTE
 	andc.	r13,r13,r11		/* Check permission */
-	bne	2f			/* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
-	lwz	r13, 0(r12)
+#ifdef CONFIG_SMP
+	subf	r10,r11,r12		/* create false data dep */
+	lwzx	r13,r11,r10		/* Get upper pte bits */
+#else
+	lwz	r13,0(r12)		/* Get upper pte bits */
+#endif
 #endif
 
+	bne	2f			/* Bail if permission mismach */
+
 	/* Jump to common TLB load point */
 	b	finish_tlb_load
 
@@ -702,7 +712,7 @@ interrupt_base:
 /*
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
- *	r10 - EA of fault
+ *	r10 - available to use
  *	r11 - TLB (info from Linux PTE)
  *	r12 - available to use
  *	r13 - upper bits of PTE (if PTE_64BIT) or available to use
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index d308a9f..31982d0 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -34,11 +34,7 @@
 #include <asm/smp.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
-/* this is used for software suspend, and that shuts down
- * CPUs even while the system is still booting... */
-#define cpu_should_die()	(cpu_is_offline(smp_processor_id()) && \
-				   (system_state == SYSTEM_RUNNING     \
-				 || system_state == SYSTEM_BOOTING))
+#define cpu_should_die()	cpu_is_offline(smp_processor_id())
 #else
 #define cpu_should_die()	0
 #endif
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 550a193..3857d7e 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -51,17 +51,6 @@ static int protect4gb = 1;
 
 static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
 
-static inline unsigned long iommu_num_pages(unsigned long vaddr,
-					    unsigned long slen)
-{
-	unsigned long npages;
-
-	npages = IOMMU_PAGE_ALIGN(vaddr + slen) - (vaddr & IOMMU_PAGE_MASK);
-	npages >>= IOMMU_PAGE_SHIFT;
-
-	return npages;
-}
-
 static int __init setup_protect4gb(char *str)
 {
 	if (strcmp(str, "on") == 0)
@@ -325,7 +314,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 		}
 		/* Allocate iommu entries for that segment */
 		vaddr = (unsigned long) sg_virt(s);
-		npages = iommu_num_pages(vaddr, slen);
+		npages = iommu_num_pages(vaddr, slen, IOMMU_PAGE_SIZE);
 		align = 0;
 		if (IOMMU_PAGE_SHIFT < PAGE_SHIFT && slen >= PAGE_SIZE &&
 		    (vaddr & ~PAGE_MASK) == 0)
@@ -418,7 +407,8 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 			unsigned long vaddr, npages;
 
 			vaddr = s->dma_address & IOMMU_PAGE_MASK;
-			npages = iommu_num_pages(s->dma_address, s->dma_length);
+			npages = iommu_num_pages(s->dma_address, s->dma_length,
+						 IOMMU_PAGE_SIZE);
 			__iommu_free(tbl, vaddr, npages);
 			s->dma_address = DMA_ERROR_CODE;
 			s->dma_length = 0;
@@ -452,7 +442,8 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
 
 		if (sg->dma_length == 0)
 			break;
-		npages = iommu_num_pages(dma_handle, sg->dma_length);
+		npages = iommu_num_pages(dma_handle, sg->dma_length,
+					 IOMMU_PAGE_SIZE);
 		__iommu_free(tbl, dma_handle, npages);
 		sg = sg_next(sg);
 	}
@@ -467,6 +458,42 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
 	spin_unlock_irqrestore(&(tbl->it_lock), flags);
 }
 
+static void iommu_table_clear(struct iommu_table *tbl)
+{
+	if (!__kdump_flag) {
+		/* Clear the table in case firmware left allocations in it */
+		ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size);
+		return;
+	}
+
+#ifdef CONFIG_CRASH_DUMP
+	if (ppc_md.tce_get) {
+		unsigned long index, tceval, tcecount = 0;
+
+		/* Reserve the existing mappings left by the first kernel. */
+		for (index = 0; index < tbl->it_size; index++) {
+			tceval = ppc_md.tce_get(tbl, index + tbl->it_offset);
+			/*
+			 * Freed TCE entry contains 0x7fffffffffffffff on JS20
+			 */
+			if (tceval && (tceval != 0x7fffffffffffffffUL)) {
+				__set_bit(index, tbl->it_map);
+				tcecount++;
+			}
+		}
+
+		if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) {
+			printk(KERN_WARNING "TCE table is full; freeing ");
+			printk(KERN_WARNING "%d entries for the kdump boot\n",
+				KDUMP_MIN_TCE_ENTRIES);
+			for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES;
+				index < tbl->it_size; index++)
+				__clear_bit(index, tbl->it_map);
+		}
+	}
+#endif
+}
+
 /*
  * Build a iommu_table structure.  This contains a bit map which
  * is used to manage allocation of the tce space.
@@ -493,38 +520,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
 	tbl->it_largehint = tbl->it_halfpoint;
 	spin_lock_init(&tbl->it_lock);
 
-#ifdef CONFIG_CRASH_DUMP
-	if (ppc_md.tce_get) {
-		unsigned long index;
-		unsigned long tceval;
-		unsigned long tcecount = 0;
-
-		/*
-		 * Reserve the existing mappings left by the first kernel.
-		 */
-		for (index = 0; index < tbl->it_size; index++) {
-			tceval = ppc_md.tce_get(tbl, index + tbl->it_offset);
-			/*
-			 * Freed TCE entry contains 0x7fffffffffffffff on JS20
-			 */
-			if (tceval && (tceval != 0x7fffffffffffffffUL)) {
-				__set_bit(index, tbl->it_map);
-				tcecount++;
-			}
-		}
-		if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) {
-			printk(KERN_WARNING "TCE table is full; ");
-			printk(KERN_WARNING "freeing %d entries for the kdump boot\n",
-				KDUMP_MIN_TCE_ENTRIES);
-			for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES;
-				index < tbl->it_size; index++)
-				__clear_bit(index, tbl->it_map);
-		}
-	}
-#else
-	/* Clear the hardware table in case firmware left allocations in it */
-	ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size);
-#endif
+	iommu_table_clear(tbl);
 
 	if (!welcomed) {
 		printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n",
@@ -584,7 +580,7 @@ dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 	BUG_ON(direction == DMA_NONE);
 
 	uaddr = (unsigned long)vaddr;
-	npages = iommu_num_pages(uaddr, size);
+	npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE);
 
 	if (tbl) {
 		align = 0;
@@ -617,7 +613,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
 	BUG_ON(direction == DMA_NONE);
 
 	if (tbl) {
-		npages = iommu_num_pages(dma_handle, size);
+		npages = iommu_num_pages(dma_handle, size, IOMMU_PAGE_SIZE);
 		iommu_free(tbl, dma_handle, npages);
 	}
 }
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index d972dec..ac222d0 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -439,8 +439,8 @@ void do_softirq(void)
 
 static LIST_HEAD(irq_hosts);
 static DEFINE_SPINLOCK(irq_big_lock);
-static DEFINE_PER_CPU(unsigned int, irq_radix_reader);
-static unsigned int irq_radix_writer;
+static unsigned int revmap_trees_allocated;
+static DEFINE_MUTEX(revmap_trees_mutex);
 struct irq_map_entry irq_map[NR_IRQS];
 static unsigned int irq_virq_count = NR_IRQS;
 static struct irq_host *irq_default_host;
@@ -583,57 +583,6 @@ void irq_set_virq_count(unsigned int count)
 		irq_virq_count = count;
 }
 
-/* radix tree not lockless safe ! we use a brlock-type mecanism
- * for now, until we can use a lockless radix tree
- */
-static void irq_radix_wrlock(unsigned long *flags)
-{
-	unsigned int cpu, ok;
-
-	spin_lock_irqsave(&irq_big_lock, *flags);
-	irq_radix_writer = 1;
-	smp_mb();
-	do {
-		barrier();
-		ok = 1;
-		for_each_possible_cpu(cpu) {
-			if (per_cpu(irq_radix_reader, cpu)) {
-				ok = 0;
-				break;
-			}
-		}
-		if (!ok)
-			cpu_relax();
-	} while(!ok);
-}
-
-static void irq_radix_wrunlock(unsigned long flags)
-{
-	smp_wmb();
-	irq_radix_writer = 0;
-	spin_unlock_irqrestore(&irq_big_lock, flags);
-}
-
-static void irq_radix_rdlock(unsigned long *flags)
-{
-	local_irq_save(*flags);
-	__get_cpu_var(irq_radix_reader) = 1;
-	smp_mb();
-	if (likely(irq_radix_writer == 0))
-		return;
-	__get_cpu_var(irq_radix_reader) = 0;
-	smp_wmb();
-	spin_lock(&irq_big_lock);
-	__get_cpu_var(irq_radix_reader) = 1;
-	spin_unlock(&irq_big_lock);
-}
-
-static void irq_radix_rdunlock(unsigned long flags)
-{
-	__get_cpu_var(irq_radix_reader) = 0;
-	local_irq_restore(flags);
-}
-
 static int irq_setup_virq(struct irq_host *host, unsigned int virq,
 			    irq_hw_number_t hwirq)
 {
@@ -788,7 +737,6 @@ void irq_dispose_mapping(unsigned int virq)
 {
 	struct irq_host *host;
 	irq_hw_number_t hwirq;
-	unsigned long flags;
 
 	if (virq == NO_IRQ)
 		return;
@@ -821,12 +769,16 @@ void irq_dispose_mapping(unsigned int virq)
 			host->revmap_data.linear.revmap[hwirq] = NO_IRQ;
 		break;
 	case IRQ_HOST_MAP_TREE:
-		/* Check if radix tree allocated yet */
-		if (host->revmap_data.tree.gfp_mask == 0)
+		/*
+		 * Check if radix tree allocated yet, if not then nothing to
+		 * remove.
+		 */
+		smp_rmb();
+		if (revmap_trees_allocated < 1)
 			break;
-		irq_radix_wrlock(&flags);
+		mutex_lock(&revmap_trees_mutex);
 		radix_tree_delete(&host->revmap_data.tree, hwirq);
-		irq_radix_wrunlock(flags);
+		mutex_unlock(&revmap_trees_mutex);
 		break;
 	}
 
@@ -875,43 +827,62 @@ unsigned int irq_find_mapping(struct irq_host *host,
 EXPORT_SYMBOL_GPL(irq_find_mapping);
 
 
-unsigned int irq_radix_revmap(struct irq_host *host,
-			      irq_hw_number_t hwirq)
+unsigned int irq_radix_revmap_lookup(struct irq_host *host,
+				     irq_hw_number_t hwirq)
 {
-	struct radix_tree_root *tree;
 	struct irq_map_entry *ptr;
 	unsigned int virq;
-	unsigned long flags;
 
 	WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
 
-	/* Check if the radix tree exist yet. We test the value of
-	 * the gfp_mask for that. Sneaky but saves another int in the
-	 * structure. If not, we fallback to slow mode
+	/*
+	 * Check if the radix tree exists and has bee initialized.
+	 * If not, we fallback to slow mode
 	 */
-	tree = &host->revmap_data.tree;
-	if (tree->gfp_mask == 0)
+	if (revmap_trees_allocated < 2)
 		return irq_find_mapping(host, hwirq);
 
 	/* Now try to resolve */
-	irq_radix_rdlock(&flags);
-	ptr = radix_tree_lookup(tree, hwirq);
-	irq_radix_rdunlock(flags);
+	/*
+	 * No rcu_read_lock(ing) needed, the ptr returned can't go under us
+	 * as it's referencing an entry in the static irq_map table.
+	 */
+	ptr = radix_tree_lookup(&host->revmap_data.tree, hwirq);
 
-	/* Found it, return */
-	if (ptr) {
+	/*
+	 * If found in radix tree, then fine.
+	 * Else fallback to linear lookup - this should not happen in practice
+	 * as it means that we failed to insert the node in the radix tree.
+	 */
+	if (ptr)
 		virq = ptr - irq_map;
-		return virq;
-	}
+	else
+		virq = irq_find_mapping(host, hwirq);
+
+	return virq;
+}
+
+void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
+			     irq_hw_number_t hwirq)
+{
+
+	WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
+
+	/*
+	 * Check if the radix tree exists yet.
+	 * If not, then the irq will be inserted into the tree when it gets
+	 * initialized.
+	 */
+	smp_rmb();
+	if (revmap_trees_allocated < 1)
+		return;
 
-	/* If not there, try to insert it */
-	virq = irq_find_mapping(host, hwirq);
 	if (virq != NO_IRQ) {
-		irq_radix_wrlock(&flags);
-		radix_tree_insert(tree, hwirq, &irq_map[virq]);
-		irq_radix_wrunlock(flags);
+		mutex_lock(&revmap_trees_mutex);
+		radix_tree_insert(&host->revmap_data.tree, hwirq,
+				  &irq_map[virq]);
+		mutex_unlock(&revmap_trees_mutex);
 	}
-	return virq;
 }
 
 unsigned int irq_linear_revmap(struct irq_host *host,
@@ -1020,14 +991,44 @@ void irq_early_init(void)
 static int irq_late_init(void)
 {
 	struct irq_host *h;
-	unsigned long flags;
+	unsigned int i;
 
-	irq_radix_wrlock(&flags);
+	/*
+	 * No mutual exclusion with respect to accessors of the tree is needed
+	 * here as the synchronization is done via the state variable
+	 * revmap_trees_allocated.
+	 */
 	list_for_each_entry(h, &irq_hosts, link) {
 		if (h->revmap_type == IRQ_HOST_MAP_TREE)
-			INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
+			INIT_RADIX_TREE(&h->revmap_data.tree, GFP_KERNEL);
+	}
+
+	/*
+	 * Make sure the radix trees inits are visible before setting
+	 * the flag
+	 */
+	smp_wmb();
+	revmap_trees_allocated = 1;
+
+	/*
+	 * Insert the reverse mapping for those interrupts already present
+	 * in irq_map[].
+	 */
+	mutex_lock(&revmap_trees_mutex);
+	for (i = 0; i < irq_virq_count; i++) {
+		if (irq_map[i].host &&
+		    (irq_map[i].host->revmap_type == IRQ_HOST_MAP_TREE))
+			radix_tree_insert(&irq_map[i].host->revmap_data.tree,
+					  irq_map[i].hwirq, &irq_map[i]);
 	}
-	irq_radix_wrunlock(flags);
+	mutex_unlock(&revmap_trees_mutex);
+
+	/*
+	 * Make sure the radix trees insertions are visible before setting
+	 * the flag
+	 */
+	smp_wmb();
+	revmap_trees_allocated = 2;
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index b4fdf2f..fe8f71d 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -347,9 +347,8 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 			linux_regs->msr |= MSR_SE;
 #endif
 			kgdb_single_step = 1;
-			if (kgdb_contthread)
-				atomic_set(&kgdb_cpu_doing_single_step,
-					   raw_smp_processor_id());
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   raw_smp_processor_id());
 		}
 		return 0;
 	}
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index b3eef30..d051e8c 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -510,10 +510,10 @@ static ssize_t update_ppp(u64 *entitlement, u8 *weight)
 		return -EINVAL;
 
 	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-	         __FUNCTION__, ppp_data.entitlement, ppp_data.weight);
+		 __func__, ppp_data.entitlement, ppp_data.weight);
 
 	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
-		 __FUNCTION__, new_entitled, new_weight);
+		 __func__, new_entitled, new_weight);
 
 	retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
 	return retval;
@@ -556,10 +556,10 @@ static ssize_t update_mpp(u64 *entitlement, u8 *weight)
 		return -EINVAL;
 
 	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-	         __FUNCTION__, mpp_data.entitled_mem, mpp_data.mem_weight);
+	         __func__, mpp_data.entitled_mem, mpp_data.mem_weight);
 
 	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
-	         __FUNCTION__, new_entitled, new_weight);
+		 __func__, new_entitled, new_weight);
 
 	rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
 	return rc;
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index aab7688..ac2a21f 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -88,11 +88,13 @@ void __init reserve_crashkernel(void)
 
 	crash_size = crashk_res.end - crashk_res.start + 1;
 
+#ifndef CONFIG_RELOCATABLE
 	if (crashk_res.start != KDUMP_KERNELBASE)
 		printk("Crash kernel location must be 0x%x\n",
 				KDUMP_KERNELBASE);
 
 	crashk_res.start = KDUMP_KERNELBASE;
+#endif
 	crash_size = PAGE_ALIGN(crash_size);
 	crashk_res.end = crashk_res.start + crash_size - 1;
 
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index a168514..e6efec7 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -255,11 +255,14 @@ static union thread_union kexec_stack
 /* Our assembly helper, in kexec_stub.S */
 extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
 					void *image, void *control,
-					void (*clear_all)(void)) ATTRIB_NORET;
+					void (*clear_all)(void),
+					unsigned long kdump_flag) ATTRIB_NORET;
 
 /* too late to fail here */
 void default_machine_kexec(struct kimage *image)
 {
+	unsigned long kdump_flag = 0;
+
 	/* prepare control code if any */
 
 	/*
@@ -270,8 +273,10 @@ void default_machine_kexec(struct kimage *image)
         * using debugger IPI.
         */
 
-       if (crashing_cpu == -1)
-               kexec_prepare_cpus();
+	if (crashing_cpu == -1)
+		kexec_prepare_cpus();
+	else
+		kdump_flag = KDUMP_SIGNATURE;
 
 	/* switch to a staticly allocated stack.  Based on irq stack code.
 	 * XXX: the task struct will likely be invalid once we do the copy!
@@ -284,7 +289,7 @@ void default_machine_kexec(struct kimage *image)
 	 */
 	kexec_sequence(&kexec_stack, image->start, image,
 			page_address(image->control_code_page),
-			ppc_md.hpte_clear_all);
+			ppc_md.hpte_clear_all, kdump_flag);
 	/* NOTREACHED */
 }
 
@@ -312,11 +317,24 @@ static struct property kernel_end_prop = {
 static void __init export_htab_values(void)
 {
 	struct device_node *node;
+	struct property *prop;
 
 	node = of_find_node_by_path("/chosen");
 	if (!node)
 		return;
 
+	/* remove any stale propertys so ours can be found */
+	prop = of_find_property(node, kernel_end_prop.name, NULL);
+	if (prop)
+		prom_remove_property(node, prop);
+	prop = of_find_property(node, htab_base_prop.name, NULL);
+	if (prop)
+		prom_remove_property(node, prop);
+	prop = of_find_property(node, htab_size_prop.name, NULL);
+	if (prop)
+		prom_remove_property(node, prop);
+
+	/* information needed by userspace when using default_machine_kexec */
 	kernel_end = __pa(_end);
 	prom_add_property(node, &kernel_end_prop);
 
diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S
index 85cb6f3..2d29752 100644
--- a/arch/powerpc/kernel/misc.S
+++ b/arch/powerpc/kernel/misc.S
@@ -31,11 +31,14 @@ _GLOBAL(reloc_offset)
 	mflr	r0
 	bl	1f
 1:	mflr	r3
-	LOAD_REG_IMMEDIATE(r4,1b)
+	PPC_LL	r4,(2f-1b)(r3)
 	subf	r3,r4,r3
 	mtlr	r0
 	blr
 
+	.align	3
+2:	PPC_LONG 1b
+
 /*
  * add_reloc_offset(x) returns x + reloc_offset().
  */
@@ -43,12 +46,15 @@ _GLOBAL(add_reloc_offset)
 	mflr	r0
 	bl	1f
 1:	mflr	r5
-	LOAD_REG_IMMEDIATE(r4,1b)
+	PPC_LL	r4,(2f-1b)(r5)
 	subf	r5,r4,r5
 	add	r3,r3,r5
 	mtlr	r0
 	blr
 
+	.align	3
+2:	PPC_LONG 1b
+
 _GLOBAL(kernel_execve)
 	li	r0,__NR_execve
 	sc
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 7a6dfbc..6a9b4bf 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -274,6 +274,10 @@ _GLOBAL(real_writeb)
 /*
  * Flush MMU TLB
  */
+#ifndef CONFIG_FSL_BOOKE
+_GLOBAL(_tlbil_all)
+_GLOBAL(_tlbil_pid)
+#endif
 _GLOBAL(_tlbia)
 #if defined(CONFIG_40x)
 	sync			/* Flush to memory before changing mapping */
@@ -344,6 +348,9 @@ _GLOBAL(_tlbia)
 /*
  * Flush MMU TLB for a particular address
  */
+#ifndef CONFIG_FSL_BOOKE
+_GLOBAL(_tlbil_va)
+#endif
 _GLOBAL(_tlbie)
 #if defined(CONFIG_40x)
 	/* We run the search with interrupts disabled because we have to change
@@ -436,6 +443,53 @@ _GLOBAL(_tlbie)
 #endif /* ! CONFIG_40x */
 	blr
 
+#if defined(CONFIG_FSL_BOOKE)
+/*
+ * Flush MMU TLB, but only on the local processor (no broadcast)
+ */
+_GLOBAL(_tlbil_all)
+#define MMUCSR0_TLBFI	(MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
+			 MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
+	li	r3,(MMUCSR0_TLBFI)@l
+	mtspr	SPRN_MMUCSR0, r3
+1:
+	mfspr	r3,SPRN_MMUCSR0
+	andi.	r3,r3,MMUCSR0_TLBFI@l
+	bne	1b
+	blr
+
+/*
+ * Flush MMU TLB for a particular process id, but only on the local processor
+ * (no broadcast)
+ */
+_GLOBAL(_tlbil_pid)
+/* we currently do an invalidate all since we don't have per pid invalidate */
+	li	r3,(MMUCSR0_TLBFI)@l
+	mtspr	SPRN_MMUCSR0, r3
+1:
+	mfspr	r3,SPRN_MMUCSR0
+	andi.	r3,r3,MMUCSR0_TLBFI@l
+	bne	1b
+	blr
+
+/*
+ * Flush MMU TLB for a particular address, but only on the local processor
+ * (no broadcast)
+ */
+_GLOBAL(_tlbil_va)
+	slwi	r4,r4,16
+	mtspr	SPRN_MAS6,r4		/* assume AS=0 for now */
+	tlbsx	0,r3
+	mfspr	r4,SPRN_MAS1		/* check valid */
+	andis.	r3,r4,MAS1_VALID@h
+	beqlr
+	rlwinm	r4,r4,0,1,31
+	mtspr	SPRN_MAS1,r4
+	tlbwe
+	blr
+#endif /* CONFIG_FSL_BOOKE */
+
+
 /*
  * Flush instruction cache.
  * This is a no-op on the 601.
@@ -846,8 +900,10 @@ _GLOBAL(kernel_thread)
 	li	r4,0		/* new sp (unused) */
 	li	r0,__NR_clone
 	sc
-	cmpwi	0,r3,0		/* parent or child? */
-	bne	1f		/* return if parent */
+	bns+	1f		/* did system call indicate error? */
+	neg	r3,r3		/* if so, make return code negative */
+1:	cmpwi	0,r3,0		/* parent or child? */
+	bne	2f		/* return if parent */
 	li	r0,0		/* make top-level stack frame */
 	stwu	r0,-16(r1)
 	mtlr	r30		/* fn addr in lr */
@@ -857,7 +913,7 @@ _GLOBAL(kernel_thread)
 	li	r0,__NR_exit	/* exit if function returns */
 	li	r3,0
 	sc
-1:	lwz	r30,8(r1)
+2:	lwz	r30,8(r1)
 	lwz	r31,12(r1)
 	addi	r1,r1,16
 	blr
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 4dd70cf..a243fd0 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -426,8 +426,10 @@ _GLOBAL(kernel_thread)
 	li	r4,0		/* new sp (unused) */
 	li	r0,__NR_clone
 	sc
-	cmpdi	0,r3,0		/* parent or child? */
-	bne	1f		/* return if parent */
+	bns+	1f		/* did system call indicate error? */
+	neg	r3,r3		/* if so, make return code negative */
+1:	cmpdi	0,r3,0		/* parent or child? */
+	bne	2f		/* return if parent */
 	li	r0,0
 	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
 	ld	r2,8(r29)
@@ -438,7 +440,7 @@ _GLOBAL(kernel_thread)
 	li	r0,__NR_exit	/* exit after child exits */
         li	r3,0
 	sc
-1:	addi	r1,r1,STACK_FRAME_OVERHEAD	
+2:	addi	r1,r1,STACK_FRAME_OVERHEAD
 	ld	r29,-24(r1)
 	ld	r30,-16(r1)
 	blr
@@ -609,10 +611,12 @@ real_mode:	/* assume normal blr return */
 
 
 /*
- * kexec_sequence(newstack, start, image, control, clear_all())
+ * kexec_sequence(newstack, start, image, control, clear_all(), kdump_flag)
  *
  * does the grungy work with stack switching and real mode switches
  * also does simple calls to other code
+ *
+ * kdump_flag says whether the next kernel should be a kdump kernel.
  */
 
 _GLOBAL(kexec_sequence)
@@ -645,7 +649,7 @@ _GLOBAL(kexec_sequence)
 	mr	r29,r5			/* image (virt) */
 	mr	r28,r6			/* control, unused */
 	mr	r27,r7			/* clear_all() fn desc */
-	mr	r26,r8			/* spare */
+	mr	r26,r8			/* kdump flag */
 	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
 
 	/* disable interrupts, we are overwriting kernel data next */
@@ -707,5 +711,6 @@ _GLOBAL(kexec_sequence)
 	mr	r4,r30	# start, aka phys mem offset
 	mtlr	4
 	li	r5,0
-	blr	/* image->start(physid, image->start, 0); */
+	mr	r6,r26			/* kdump_flag */
+	blr	/* image->start(physid, image->start, 0, kdump_flag); */
 #endif /* CONFIG_KEXEC */
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index e9be908..93ae5b1 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -78,7 +78,7 @@ struct of_device *of_device_alloc(struct device_node *np,
 	dev->dev.parent = parent;
 	dev->dev.release = of_release_dev;
 	dev->dev.archdata.of_node = np;
-	dev->dev.archdata.numa_node = of_node_to_nid(np);
+	set_dev_node(&dev->dev, of_node_to_nid(np));
 
 	if (bus_id)
 		strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index c9bf17e..48a3471 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -12,6 +12,7 @@
 
 #include <asm/lppaca.h>
 #include <asm/paca.h>
+#include <asm/sections.h>
 
 /* This symbol is provided by the linker - let it fill in the paca
  * field correctly */
@@ -79,6 +80,8 @@ void __init initialise_pacas(void)
 		new_paca->lock_token = 0x8000;
 		new_paca->paca_index = cpu;
 		new_paca->kernel_toc = kernel_toc;
+		new_paca->kernelbase = (unsigned long) _stext;
+		new_paca->kernel_msr = MSR_KERNEL;
 		new_paca->hw_cpu_id = 0xffff;
 		new_paca->slb_shadow_ptr = &slb_shadow[cpu];
 		new_paca->__current = &init_task;
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index ea0c61e..1ec7393 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -56,6 +56,34 @@ resource_size_t isa_mem_base;
 /* Default PCI flags is 0 */
 unsigned int ppc_pci_flags;
 
+static struct dma_mapping_ops *pci_dma_ops;
+
+void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
+{
+	pci_dma_ops = dma_ops;
+}
+
+struct dma_mapping_ops *get_pci_dma_ops(void)
+{
+	return pci_dma_ops;
+}
+EXPORT_SYMBOL(get_pci_dma_ops);
+
+int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return dma_set_mask(&dev->dev, mask);
+}
+
+int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	int rc;
+
+	rc = dma_set_mask(&dev->dev, mask);
+	dev->dev.coherent_dma_mask = dev->dma_mask;
+
+	return rc;
+}
+
 struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
 {
 	struct pci_controller *phb;
@@ -180,6 +208,26 @@ char __devinit *pcibios_setup(char *str)
 	return str;
 }
 
+void __devinit pcibios_setup_new_device(struct pci_dev *dev)
+{
+	struct dev_archdata *sd = &dev->dev.archdata;
+
+	sd->of_node = pci_device_to_OF_node(dev);
+
+	DBG("PCI: device %s OF node: %s\n", pci_name(dev),
+	    sd->of_node ? sd->of_node->full_name : "<none>");
+
+	sd->dma_ops = pci_dma_ops;
+#ifdef CONFIG_PPC32
+	sd->dma_data = (void *)PCI_DRAM_OFFSET;
+#endif
+	set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
+
+	if (ppc_md.pci_dma_dev_setup)
+		ppc_md.pci_dma_dev_setup(dev);
+}
+EXPORT_SYMBOL(pcibios_setup_new_device);
+
 /*
  * Reads the interrupt pin to determine if interrupt is use by card.
  * If the interrupt is used, then gets the interrupt line from the
@@ -371,7 +419,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
 	struct pci_dev *pdev = NULL;
 	struct resource *found = NULL;
 	unsigned long prot = pgprot_val(protection);
-	unsigned long offset = pfn << PAGE_SHIFT;
+	resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
 	int i;
 
 	if (page_is_ram(pfn))
@@ -403,7 +451,8 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
 		pci_dev_put(pdev);
 	}
 
-	DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
+	DBG("non-PCI map for %llx, prot: %lx\n",
+	    (unsigned long long)offset, prot);
 
 	return __pgprot(prot);
 }
@@ -422,7 +471,8 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state, int write_combine)
 {
-	resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
+	resource_size_t offset =
+		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
 	struct resource *rp;
 	int ret;
 
@@ -441,6 +491,132 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 	return ret;
 }
 
+/* This provides legacy IO read access on a bus */
+int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
+{
+	unsigned long offset;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct resource *rp = &hose->io_resource;
+	void __iomem *addr;
+
+	/* Check if port can be supported by that bus. We only check
+	 * the ranges of the PHB though, not the bus itself as the rules
+	 * for forwarding legacy cycles down bridges are not our problem
+	 * here. So if the host bridge supports it, we do it.
+	 */
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	offset += port;
+
+	if (!(rp->flags & IORESOURCE_IO))
+		return -ENXIO;
+	if (offset < rp->start || (offset + size) > rp->end)
+		return -ENXIO;
+	addr = hose->io_base_virt + port;
+
+	switch(size) {
+	case 1:
+		*((u8 *)val) = in_8(addr);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		*((u16 *)val) = in_le16(addr);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		*((u32 *)val) = in_le32(addr);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+/* This provides legacy IO write access on a bus */
+int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
+{
+	unsigned long offset;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct resource *rp = &hose->io_resource;
+	void __iomem *addr;
+
+	/* Check if port can be supported by that bus. We only check
+	 * the ranges of the PHB though, not the bus itself as the rules
+	 * for forwarding legacy cycles down bridges are not our problem
+	 * here. So if the host bridge supports it, we do it.
+	 */
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	offset += port;
+
+	if (!(rp->flags & IORESOURCE_IO))
+		return -ENXIO;
+	if (offset < rp->start || (offset + size) > rp->end)
+		return -ENXIO;
+	addr = hose->io_base_virt + port;
+
+	/* WARNING: The generic code is idiotic. It gets passed a pointer
+	 * to what can be a 1, 2 or 4 byte quantity and always reads that
+	 * as a u32, which means that we have to correct the location of
+	 * the data read within those 32 bits for size 1 and 2
+	 */
+	switch(size) {
+	case 1:
+		out_8(addr, val >> 24);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		out_le16(addr, val >> 16);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		out_le32(addr, val);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+/* This provides legacy IO or memory mmap access on a bus */
+int pci_mmap_legacy_page_range(struct pci_bus *bus,
+			       struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	resource_size_t offset =
+		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
+	resource_size_t size = vma->vm_end - vma->vm_start;
+	struct resource *rp;
+
+	pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
+		 pci_domain_nr(bus), bus->number,
+		 mmap_state == pci_mmap_mem ? "MEM" : "IO",
+		 (unsigned long long)offset,
+		 (unsigned long long)(offset + size - 1));
+
+	if (mmap_state == pci_mmap_mem) {
+		if ((offset + size) > hose->isa_mem_size)
+			return -ENXIO;
+		offset += hose->isa_mem_phys;
+	} else {
+		unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		unsigned long roffset = offset + io_offset;
+		rp = &hose->io_resource;
+		if (!(rp->flags & IORESOURCE_IO))
+			return -ENXIO;
+		if (roffset < rp->start || (roffset + size) > rp->end)
+			return -ENXIO;
+		offset += hose->io_base_phys;
+	}
+	pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
+
+	vma->vm_pgoff = offset >> PAGE_SHIFT;
+	vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+				     | _PAGE_NO_CACHE | _PAGE_GUARDED);
+	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot);
+}
+
 void pci_resource_to_user(const struct pci_dev *dev, int bar,
 			  const struct resource *rsrc,
 			  resource_size_t *start, resource_size_t *end)
@@ -543,6 +719,12 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 		cpu_addr = of_translate_address(dev, ranges + 3);
 		size = of_read_number(ranges + pna + 3, 2);
 		ranges += np;
+
+		/* If we failed translation or got a zero-sized region
+		 * (some FW try to feed us with non sensical zero sized regions
+		 * such as power3 which look like some kind of attempt at exposing
+		 * the VGA memory hole)
+		 */
 		if (cpu_addr == OF_BAD_ADDR || size == 0)
 			continue;
 
@@ -616,6 +798,8 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				isa_hole = memno;
 				if (primary || isa_mem_base == 0)
 					isa_mem_base = cpu_addr;
+				hose->isa_mem_phys = cpu_addr;
+				hose->isa_mem_size = size;
 			}
 
 			/* We get the PCI/Mem offset from the first range or
@@ -731,11 +915,6 @@ static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
 
 	res->start = (res->start + offset) & mask;
 	res->end = (res->end + offset) & mask;
-
-	pr_debug("PCI:%s            %016llx-%016llx\n",
-		 pci_name(dev),
-		 (unsigned long long)res->start,
-		 (unsigned long long)res->end);
 }
 
 
@@ -781,6 +960,11 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
 			 (unsigned int)res->flags);
 
 		fixup_resource(res, dev);
+
+		pr_debug("PCI:%s            %016llx-%016llx\n",
+			 pci_name(dev),
+			 (unsigned long long)res->start,
+			 (unsigned long long)res->end);
 	}
 
 	/* Call machine specific resource fixup */
@@ -789,58 +973,127 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
 
-static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
+/* This function tries to figure out if a bridge resource has been initialized
+ * by the firmware or not. It doesn't have to be absolutely bullet proof, but
+ * things go more smoothly when it gets it right. It should covers cases such
+ * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges
+ */
+static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
+							   struct resource *res)
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct pci_dev *dev = bus->self;
+	resource_size_t offset;
+	u16 command;
+	int i;
 
-	pr_debug("PCI: Fixup bus %d (%s)\n", bus->number, dev ? pci_name(dev) : "PHB");
+	/* We don't do anything if PCI_PROBE_ONLY is set */
+	if (ppc_pci_flags & PPC_PCI_PROBE_ONLY)
+		return 0;
 
-	/* Fixup PCI<->PCI bridges. Host bridges are handled separately, for
-	 * now differently between 32 and 64 bits.
-	 */
-	if (dev != NULL) {
-		struct resource *res;
-		int i;
+	/* Job is a bit different between memory and IO */
+	if (res->flags & IORESOURCE_MEM) {
+		/* If the BAR is non-0 (res != pci_mem_offset) then it's probably been
+		 * initialized by somebody
+		 */
+		if (res->start != hose->pci_mem_offset)
+			return 0;
 
-		for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
-			if ((res = bus->resource[i]) == NULL)
-				continue;
-			if (!res->flags)
-				continue;
-			if (i >= 3 && bus->self->transparent)
-				continue;
-			/* On PowerMac, Apple leaves bridge windows open over
-			 * an inaccessible region of memory space (0...fffff)
-			 * which is somewhat bogus, but that's what they think
-			 * means disabled...
-			 *
-			 * We clear those to force them to be reallocated later
-			 *
-			 * We detect such regions by the fact that the base is
-			 * equal to the pci_mem_offset of the host bridge and
-			 * their size is smaller than 1M.
-			 */
-			if (res->flags & IORESOURCE_MEM &&
-			    res->start == hose->pci_mem_offset &&
-			    res->end < 0x100000) {
-				printk(KERN_INFO
-				       "PCI: Closing bogus Apple Firmware"
-				       " region %d on bus 0x%02x\n",
-				       i, bus->number);
-				res->flags = 0;
-				continue;
-			}
+		/* The BAR is 0, let's check if memory decoding is enabled on
+		 * the bridge. If not, we consider it unassigned
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if ((command & PCI_COMMAND_MEMORY) == 0)
+			return 1;
 
-			pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
-				 pci_name(dev), i,
-				 (unsigned long long)res->start,\
-				 (unsigned long long)res->end,
-				 (unsigned int)res->flags);
+		/* Memory decoding is enabled and the BAR is 0. If any of the bridge
+		 * resources covers that starting address (0 then it's good enough for
+		 * us for memory
+		 */
+		for (i = 0; i < 3; i++) {
+			if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
+			    hose->mem_resources[i].start == hose->pci_mem_offset)
+				return 0;
+		}
+
+		/* Well, it starts at 0 and we know it will collide so we may as
+		 * well consider it as unassigned. That covers the Apple case.
+		 */
+		return 1;
+	} else {
+		/* If the BAR is non-0, then we consider it assigned */
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		if (((res->start - offset) & 0xfffffffful) != 0)
+			return 0;
+
+		/* Here, we are a bit different than memory as typically IO space
+		 * starting at low addresses -is- valid. What we do instead if that
+		 * we consider as unassigned anything that doesn't have IO enabled
+		 * in the PCI command register, and that's it.
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if (command & PCI_COMMAND_IO)
+			return 0;
+
+		/* It's starting at 0 and IO is disabled in the bridge, consider
+		 * it unassigned
+		 */
+		return 1;
+	}
+}
 
-			fixup_resource(res, dev);
+/* Fixup resources of a PCI<->PCI bridge */
+static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
+{
+	struct resource *res;
+	int i;
+
+	struct pci_dev *dev = bus->self;
+
+	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+		if ((res = bus->resource[i]) == NULL)
+			continue;
+		if (!res->flags)
+			continue;
+		if (i >= 3 && bus->self->transparent)
+			continue;
+
+		pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
+			 pci_name(dev), i,
+			 (unsigned long long)res->start,\
+			 (unsigned long long)res->end,
+			 (unsigned int)res->flags);
+
+		/* Perform fixup */
+		fixup_resource(res, dev);
+
+		/* Try to detect uninitialized P2P bridge resources,
+		 * and clear them out so they get re-assigned later
+		 */
+		if (pcibios_uninitialized_bridge_resource(bus, res)) {
+			res->flags = 0;
+			pr_debug("PCI:%s            (unassigned)\n", pci_name(dev));
+		} else {
+
+			pr_debug("PCI:%s            %016llx-%016llx\n",
+				 pci_name(dev),
+				 (unsigned long long)res->start,
+				 (unsigned long long)res->end);
 		}
 	}
+}
+
+static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev = bus->self;
+
+	pr_debug("PCI: Fixup bus %d (%s)\n", bus->number, dev ? pci_name(dev) : "PHB");
+
+	/* Fixup PCI<->PCI bridges. Host bridges are handled separately, for
+	 * now differently between 32 and 64 bits.
+	 */
+	if (dev != NULL)
+		pcibios_fixup_bridge(bus);
 
 	/* Additional setup that is different between 32 and 64 bits for now */
 	pcibios_do_bus_setup(bus);
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 88db4ff..131b1df 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -53,12 +53,19 @@ LIST_HEAD(hose_list);
 
 static int pci_bus_count;
 
+/* This will remain NULL for now, until isa-bridge.c is made common
+ * to both 32-bit and 64-bit.
+ */
+struct pci_dev *isa_bridge_pcidev;
+EXPORT_SYMBOL_GPL(isa_bridge_pcidev);
+
 static void
-fixup_hide_host_resource_fsl(struct pci_dev* dev)
+fixup_hide_host_resource_fsl(struct pci_dev *dev)
 {
 	int i, class = dev->class >> 8;
 
-	if ((class == PCI_CLASS_PROCESSOR_POWERPC) &&
+	if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
+	     class == PCI_CLASS_BRIDGE_OTHER) &&
 		(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
 		(dev->bus->parent == NULL)) {
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
@@ -424,6 +431,7 @@ void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
 	unsigned long io_offset;
 	struct resource *res;
 	int i;
+	struct pci_dev *dev;
 
 	/* Hookup PHB resources */
 	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
@@ -457,6 +465,12 @@ void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
 			bus->resource[i+1] = res;
 		}
 	}
+
+	if (ppc_md.pci_dma_bus_setup)
+		ppc_md.pci_dma_bus_setup(bus);
+
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		pcibios_setup_new_device(dev);
 }
 
 /* the next one is stolen from the alpha port... */
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 30eedfc..8247cff 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -52,35 +52,6 @@ EXPORT_SYMBOL(pci_io_base);
 
 LIST_HEAD(hose_list);
 
-static struct dma_mapping_ops *pci_dma_ops;
-
-void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
-{
-	pci_dma_ops = dma_ops;
-}
-
-struct dma_mapping_ops *get_pci_dma_ops(void)
-{
-	return pci_dma_ops;
-}
-EXPORT_SYMBOL(get_pci_dma_ops);
-
-
-int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	return dma_set_mask(&dev->dev, mask);
-}
-
-int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	int rc;
-
-	rc = dma_set_mask(&dev->dev, mask);
-	dev->dev.coherent_dma_mask = dev->dma_mask;
-
-	return rc;
-}
-
 static void fixup_broken_pcnet32(struct pci_dev* dev)
 {
 	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
@@ -548,26 +519,6 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
 }
 EXPORT_SYMBOL_GPL(pcibios_map_io_space);
 
-void __devinit pcibios_setup_new_device(struct pci_dev *dev)
-{
-	struct dev_archdata *sd = &dev->dev.archdata;
-
-	sd->of_node = pci_device_to_OF_node(dev);
-
-	DBG("PCI: device %s OF node: %s\n", pci_name(dev),
-	    sd->of_node ? sd->of_node->full_name : "<none>");
-
-	sd->dma_ops = pci_dma_ops;
-#ifdef CONFIG_NUMA
-	sd->numa_node = pcibus_to_node(dev->bus);
-#else
-	sd->numa_node = -1;
-#endif
-	if (ppc_md.pci_dma_dev_setup)
-		ppc_md.pci_dma_dev_setup(dev);
-}
-EXPORT_SYMBOL(pcibios_setup_new_device);
-
 void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index e1ea4fe..8edc235 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -119,6 +119,9 @@ EXPORT_SYMBOL(flush_instruction_cache);
 EXPORT_SYMBOL(flush_tlb_kernel_range);
 EXPORT_SYMBOL(flush_tlb_page);
 EXPORT_SYMBOL(_tlbie);
+#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
+EXPORT_SYMBOL(_tlbil_va);
+#endif
 #endif
 EXPORT_SYMBOL(__flush_icache_range);
 EXPORT_SYMBOL(flush_dcache_range);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 87d83c5..3a2dc7e 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -888,9 +888,10 @@ static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
  */
 static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 {
-	cell_t *dm, *ls;
+	cell_t *dm, *ls, *usm;
 	unsigned long l, n, flags;
 	u64 base, size, lmb_size;
+	unsigned int is_kexec_kdump = 0, rngs;
 
 	ls = (cell_t *)of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
 	if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t))
@@ -905,6 +906,12 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 	if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t))
 		return 0;
 
+	/* check if this is a kexec/kdump kernel. */
+	usm = (cell_t *)of_get_flat_dt_prop(node, "linux,drconf-usable-memory",
+						 &l);
+	if (usm != NULL)
+		is_kexec_kdump = 1;
+
 	for (; n != 0; --n) {
 		base = dt_mem_next_cell(dt_root_addr_cells, &dm);
 		flags = dm[3];
@@ -915,13 +922,34 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 		if ((flags & 0x80) || !(flags & 0x8))
 			continue;
 		size = lmb_size;
-		if (iommu_is_off) {
-			if (base >= 0x80000000ul)
+		rngs = 1;
+		if (is_kexec_kdump) {
+			/*
+			 * For each lmb in ibm,dynamic-memory, a corresponding
+			 * entry in linux,drconf-usable-memory property contains
+			 * a counter 'p' followed by 'p' (base, size) duple.
+			 * Now read the counter from
+			 * linux,drconf-usable-memory property
+			 */
+			rngs = dt_mem_next_cell(dt_root_size_cells, &usm);
+			if (!rngs) /* there are no (base, size) duple */
 				continue;
-			if ((base + size) > 0x80000000ul)
-				size = 0x80000000ul - base;
 		}
-		lmb_add(base, size);
+		do {
+			if (is_kexec_kdump) {
+				base = dt_mem_next_cell(dt_root_addr_cells,
+							 &usm);
+				size = dt_mem_next_cell(dt_root_size_cells,
+							 &usm);
+			}
+			if (iommu_is_off) {
+				if (base >= 0x80000000ul)
+					continue;
+				if ((base + size) > 0x80000000ul)
+					size = 0x80000000ul - base;
+			}
+			lmb_add(base, size);
+		} while (--rngs);
 	}
 	lmb_dump_all();
 	return 0;
@@ -1164,6 +1192,9 @@ void __init early_init_devtree(void *params)
 
 	/* Reserve LMB regions used by kernel, initrd, dt, etc... */
 	lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+	/* If relocatable, reserve first 32k for interrupt vectors etc. */
+	if (PHYSICAL_START > MEMORY_START)
+		lmb_reserve(MEMORY_START, 0x8000);
 	reserve_kdump_trampoline();
 	reserve_crashkernel();
 	early_reserve_mem();
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index b72849a..23e0db2 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -487,67 +487,6 @@ static int __init prom_setprop(phandle node, const char *nodename,
 	return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
 }
 
-/* We can't use the standard versions because of RELOC headaches. */
-#define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
-			 || ('a' <= (c) && (c) <= 'f') \
-			 || ('A' <= (c) && (c) <= 'F'))
-
-#define isdigit(c)	('0' <= (c) && (c) <= '9')
-#define islower(c)	('a' <= (c) && (c) <= 'z')
-#define toupper(c)	(islower(c) ? ((c) - 'a' + 'A') : (c))
-
-unsigned long prom_strtoul(const char *cp, const char **endp)
-{
-	unsigned long result = 0, base = 10, value;
-
-	if (*cp == '0') {
-		base = 8;
-		cp++;
-		if (toupper(*cp) == 'X') {
-			cp++;
-			base = 16;
-		}
-	}
-
-	while (isxdigit(*cp) &&
-	       (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
-		result = result * base + value;
-		cp++;
-	}
-
-	if (endp)
-		*endp = cp;
-
-	return result;
-}
-
-unsigned long prom_memparse(const char *ptr, const char **retptr)
-{
-	unsigned long ret = prom_strtoul(ptr, retptr);
-	int shift = 0;
-
-	/*
-	 * We can't use a switch here because GCC *may* generate a
-	 * jump table which won't work, because we're not running at
-	 * the address we're linked at.
-	 */
-	if ('G' == **retptr || 'g' == **retptr)
-		shift = 30;
-
-	if ('M' == **retptr || 'm' == **retptr)
-		shift = 20;
-
-	if ('K' == **retptr || 'k' == **retptr)
-		shift = 10;
-
-	if (shift) {
-		ret <<= shift;
-		(*retptr)++;
-	}
-
-	return ret;
-}
-
 /*
  * Early parsing of the command line passed to the kernel, used for
  * "mem=x" and the options that affect the iommu
@@ -732,7 +671,7 @@ static struct fake_elf {
 			u32	ignore_me;
 		} rpadesc;
 	} rpanote;
-} fake_elf = {
+} fake_elf __section(.fakeelf) = {
 	.elfhdr = {
 		.e_ident = { 0x7f, 'E', 'L', 'F',
 			     ELFCLASS32, ELFDATA2MSB, EV_CURRENT },
@@ -774,13 +713,13 @@ static struct fake_elf {
 		.type = 0x12759999,
 		.name = "IBM,RPA-Client-Config",
 		.rpadesc = {
-			.lpar_affinity = 0,
-			.min_rmo_size = 64,	/* in megabytes */
+			.lpar_affinity = 1,
+			.min_rmo_size = 128,	/* in megabytes */
 			.min_rmo_percent = 0,
-			.max_pft_size = 48,	/* 2^48 bytes max PFT size */
+			.max_pft_size = 46,	/* 2^46 bytes max PFT size */
 			.splpar = 1,
 			.min_load = ~0U,
-			.new_mem_def = 0
+			.new_mem_def = 1
 		}
 	}
 };
@@ -1321,7 +1260,7 @@ static void __init prom_initialize_tce_table(void)
  *
  * -- Cort
  */
-extern void __secondary_hold(void);
+extern char __secondary_hold;
 extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 
@@ -1342,13 +1281,7 @@ static void __init prom_hold_cpus(void)
 		= (void *) LOW_ADDR(__secondary_hold_spinloop);
 	unsigned long *acknowledge
 		= (void *) LOW_ADDR(__secondary_hold_acknowledge);
-#ifdef CONFIG_PPC64
-	/* __secondary_hold is actually a descriptor, not the text address */
-	unsigned long secondary_hold
-		= __pa(*PTRRELOC((unsigned long *)__secondary_hold));
-#else
 	unsigned long secondary_hold = LOW_ADDR(__secondary_hold);
-#endif
 
 	prom_debug("prom_hold_cpus: start...\n");
 	prom_debug("    1) spinloop       = 0x%x\n", (unsigned long)spinloop);
@@ -2315,13 +2248,14 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
 
 unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 			       unsigned long pp,
-			       unsigned long r6, unsigned long r7)
+			       unsigned long r6, unsigned long r7,
+			       unsigned long kbase)
 {	
 	struct prom_t *_prom;
 	unsigned long hdr;
-	unsigned long offset = reloc_offset();
 
 #ifdef CONFIG_PPC32
+	unsigned long offset = reloc_offset();
 	reloc_got2(offset);
 #endif
 
@@ -2355,9 +2289,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 */
 	RELOC(of_platform) = prom_find_machine_type();
 
+#ifndef CONFIG_RELOCATABLE
 	/* Bail if this is a kdump kernel. */
 	if (PHYSICAL_START > 0)
 		prom_panic("Error: You can't boot a kdump kernel from OF!\n");
+#endif
 
 	/*
 	 * Check for an initrd
@@ -2377,7 +2313,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 * Copy the CPU hold code
 	 */
 	if (RELOC(of_platform) != PLATFORM_POWERMAC)
-		copy_and_flush(0, KERNELBASE + offset, 0x100, 0);
+		copy_and_flush(0, kbase, 0x100, 0);
 
 	/*
 	 * Do early parsing of command line
@@ -2480,7 +2416,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	reloc_got2(-offset);
 #endif
 
-	__start(hdr, KERNELBASE + offset, 0);
+	__start(hdr, kbase, 0);
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 2c7e8e8..ea3a2ec 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,7 @@ WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush
 _end enter_prom memcpy memset reloc_offset __secondary_hold
 __secondary_hold_acknowledge __secondary_hold_spinloop __start
 strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2 kernstart_addr"
+reloc_got2 kernstart_addr memstart_addr"
 
 NM="$1"
 OBJ="$2"
diff --git a/arch/powerpc/kernel/reloc_64.S b/arch/powerpc/kernel/reloc_64.S
new file mode 100644
index 0000000..b47a0e1
--- /dev/null
+++ b/arch/powerpc/kernel/reloc_64.S
@@ -0,0 +1,87 @@
+/*
+ * Code to process dynamic relocations in the kernel.
+ *
+ * Copyright 2008 Paul Mackerras, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+
+RELA = 7
+RELACOUNT = 0x6ffffff9
+R_PPC64_RELATIVE = 22
+
+/*
+ * r3 = desired final address of kernel
+ */
+_GLOBAL(relocate)
+	mflr	r0
+	bcl	20,31,$+4
+0:	mflr	r12		/* r12 has runtime addr of label 0 */
+	mtlr	r0
+	ld	r11,(p_dyn - 0b)(r12)
+	add	r11,r11,r12	/* r11 has runtime addr of .dynamic section */
+	ld	r9,(p_rela - 0b)(r12)
+	add	r9,r9,r12	/* r9 has runtime addr of .rela.dyn section */
+	ld	r10,(p_st - 0b)(r12)
+	add	r10,r10,r12	/* r10 has runtime addr of _stext */
+
+	/*
+	 * Scan the dynamic section for the RELA and RELACOUNT entries.
+	 */
+	li	r7,0
+	li	r8,0
+1:	ld	r6,0(r11)	/* get tag */
+	cmpdi	r6,0
+	beq	4f		/* end of list */
+	cmpdi	r6,RELA
+	bne	2f
+	ld	r7,8(r11)	/* get RELA pointer in r7 */
+	b	3f
+2:	addis	r6,r6,(-RELACOUNT)@ha
+	cmpdi	r6,RELACOUNT@l
+	bne	3f
+	ld	r8,8(r11)	/* get RELACOUNT value in r8 */
+3:	addi	r11,r11,16
+	b	1b
+4:	cmpdi	r7,0		/* check we have both RELA and RELACOUNT */
+	cmpdi	cr1,r8,0
+	beq	6f
+	beq	cr1,6f
+
+	/*
+	 * Work out linktime address of _stext and hence the
+	 * relocation offset to be applied.
+	 * cur_offset [r7] = rela.run [r9] - rela.link [r7]
+	 * _stext.link [r10] = _stext.run [r10] - cur_offset [r7]
+	 * final_offset [r3] = _stext.final [r3] - _stext.link [r10]
+	 */
+	subf	r7,r7,r9	/* cur_offset */
+	subf	r10,r7,r10
+	subf	r3,r10,r3	/* final_offset */
+
+	/*
+	 * Run through the list of relocations and process the
+	 * R_PPC64_RELATIVE ones.
+	 */
+	mtctr	r8
+5:	lwz	r0,12(9)	/* ELF64_R_TYPE(reloc->r_info) */
+	cmpwi	r0,R_PPC64_RELATIVE
+	bne	6f
+	ld	r6,0(r9)	/* reloc->r_offset */
+	ld	r0,16(r9)	/* reloc->r_addend */
+	add	r0,r0,r3
+	stdx	r0,r7,r6
+	addi	r9,r9,24
+	bdnz	5b
+
+6:	blr
+
+p_dyn:	.llong	__dynamic_start - 0b
+p_rela:	.llong	__rela_dyn_start - 0b
+p_st:	.llong	_stext - 0b
+
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 9cc5a52..705fc4b 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -59,6 +59,7 @@
 #include <asm/mmu.h>
 #include <asm/xmon.h>
 #include <asm/cputhreads.h>
+#include <mm/mmu_decl.h>
 
 #include "setup.h"
 
@@ -190,6 +191,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		if (ppc_md.show_cpuinfo != NULL)
 			ppc_md.show_cpuinfo(m);
 
+#ifdef CONFIG_PPC32
+		/* Display the amount of memory */
+		seq_printf(m, "Memory\t\t: %d MB\n",
+			   (unsigned int)(total_memory / (1024 * 1024)));
+#endif
+
 		return 0;
 	}
 
@@ -254,8 +261,21 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	/* If we are a Freescale core do a simple check so
 	 * we dont have to keep adding cases in the future */
 	if (PVR_VER(pvr) & 0x8000) {
-		maj = PVR_MAJ(pvr);
-		min = PVR_MIN(pvr);
+		switch (PVR_VER(pvr)) {
+		case 0x8000:	/* 7441/7450/7451, Voyager */
+		case 0x8001:	/* 7445/7455, Apollo 6 */
+		case 0x8002:	/* 7447/7457, Apollo 7 */
+		case 0x8003:	/* 7447A, Apollo 7 PM */
+		case 0x8004:	/* 7448, Apollo 8 */
+		case 0x800c:	/* 7410, Nitro */
+			maj = ((pvr >> 8) & 0xF);
+			min = PVR_MIN(pvr);
+			break;
+		default:	/* e500/book-e */
+			maj = PVR_MAJ(pvr);
+			min = PVR_MIN(pvr);
+			break;
+		}
 	} else {
 		switch (PVR_VER(pvr)) {
 			case 0x0020:	/* 403 family */
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 066e65c..c1a2762 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -111,7 +111,7 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
  * This is called very early on the boot process, after a minimal
  * MMU environment has been set up but before MMU_init is called.
  */
-notrace void __init machine_init(unsigned long dt_ptr, unsigned long phys)
+notrace void __init machine_init(unsigned long dt_ptr)
 {
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
@@ -209,23 +209,12 @@ EXPORT_SYMBOL(nvram_sync);
 
 #endif /* CONFIG_NVRAM */
 
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
 int __init ppc_init(void)
 {
-	int cpu;
-
 	/* clear the progress line */
 	if (ppc_md.progress)
 		ppc_md.progress("             ", 0xffff);
 
-	/* register CPU devices */
-	for_each_possible_cpu(cpu) {
-		struct cpu *c = &per_cpu(cpu_devices, cpu);
-		c->hotpluggable = 1;
-		register_cpu(c, cpu);
-	}
-
 	/* call platform init */
 	if (ppc_md.init != NULL) {
 		ppc_md.init();
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 8b25f51..843c0af 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -255,9 +255,11 @@ void early_setup_secondary(void)
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+extern unsigned long __secondary_hold_spinloop;
+extern void generic_secondary_smp_init(void);
+
 void smp_release_cpus(void)
 {
-	extern unsigned long __secondary_hold_spinloop;
 	unsigned long *ptr;
 
 	DBG(" -> smp_release_cpus()\n");
@@ -266,12 +268,11 @@ void smp_release_cpus(void)
 	 * all now so they can start to spin on their individual paca
 	 * spinloops. For non SMP kernels, the secondary cpus never get out
 	 * of the common spinloop.
-	 * This is useless but harmless on iSeries, secondaries are already
-	 * waiting on their paca spinloops. */
+	 */
 
 	ptr  = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
 			- PHYSICAL_START);
-	*ptr = 1;
+	*ptr = __pa(generic_secondary_smp_init);
 	mb();
 
 	DBG(" <- smp_release_cpus()\n");
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 28f4b9f..b427bf8 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -12,6 +12,8 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+
 extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 				  size_t frame_size);
 extern void restore_sigmask(sigset_t *set);
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 65ad925..c6a8f232 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -235,8 +235,6 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	else
 		for (i = 0; i < 32 ; i++)
 			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
-
-#else
 #endif
 	return err;
 }
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 5337ca7..ff9f701 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -101,8 +101,7 @@ void smp_message_recv(int msg)
 		generic_smp_call_function_interrupt();
 		break;
 	case PPC_MSG_RESCHEDULE:
-		/* XXX Do we have to do this? */
-		set_need_resched();
+		/* we notice need_resched on exit */
 		break;
 	case PPC_MSG_CALL_FUNC_SINGLE:
 		generic_smp_call_function_single_interrupt();
@@ -453,6 +452,7 @@ int __devinit start_secondary(void *unused)
 	secondary_cpu_time_init();
 
 	ipi_call_lock();
+	notify_cpu_starting(cpu);
 	cpu_set(cpu, cpu_online_map);
 	/* Update sibling maps */
 	base = cpu_first_thread_in_core(cpu);
diff --git a/arch/powerpc/kernel/softemu8xx.c b/arch/powerpc/kernel/softemu8xx.c
index c906c4b..23c8c5e 100644
--- a/arch/powerpc/kernel/softemu8xx.c
+++ b/arch/powerpc/kernel/softemu8xx.c
@@ -23,7 +23,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/interrupt.h>
 
 #include <asm/pgtable.h>
diff --git a/arch/powerpc/kernel/swsusp_asm64.S b/arch/powerpc/kernel/swsusp_asm64.S
index e092c3c..86ac1d9 100644
--- a/arch/powerpc/kernel/swsusp_asm64.S
+++ b/arch/powerpc/kernel/swsusp_asm64.S
@@ -133,7 +133,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
 	cmpdi	r12,0
 	beq-	nothing_to_copy
-	li	r15,512
+	li	r15,PAGE_SIZE>>3
 copyloop:
 	ld	r13,pbe_address(r12)
 	ld	r14,pbe_orig_address(r12)
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index d98634c..bb1cfcf 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -61,42 +61,6 @@ asmlinkage long ppc32_select(u32 n, compat_ulong_t __user *inp,
 	return compat_sys_select((int)n, inp, outp, exp, compat_ptr(tvp_x));
 }
 
-int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
-{
-	compat_ino_t ino;
-	long err;
-
-	if (stat->size > MAX_NON_LFS || !new_valid_dev(stat->dev) ||
-	    !new_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-
-	ino = stat->ino;
-	if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino)
-		return -EOVERFLOW;
-
-	err  = access_ok(VERIFY_WRITE, statbuf, sizeof(*statbuf)) ? 0 : -EFAULT;
-	err |= __put_user(new_encode_dev(stat->dev), &statbuf->st_dev);
-	err |= __put_user(ino, &statbuf->st_ino);
-	err |= __put_user(stat->mode, &statbuf->st_mode);
-	err |= __put_user(stat->nlink, &statbuf->st_nlink);
-	err |= __put_user(stat->uid, &statbuf->st_uid);
-	err |= __put_user(stat->gid, &statbuf->st_gid);
-	err |= __put_user(new_encode_dev(stat->rdev), &statbuf->st_rdev);
-	err |= __put_user(stat->size, &statbuf->st_size);
-	err |= __put_user(stat->atime.tv_sec, &statbuf->st_atime);
-	err |= __put_user(stat->atime.tv_nsec, &statbuf->st_atime_nsec);
-	err |= __put_user(stat->mtime.tv_sec, &statbuf->st_mtime);
-	err |= __put_user(stat->mtime.tv_nsec, &statbuf->st_mtime_nsec);
-	err |= __put_user(stat->ctime.tv_sec, &statbuf->st_ctime);
-	err |= __put_user(stat->ctime.tv_nsec, &statbuf->st_ctime_nsec);
-	err |= __put_user(stat->blksize, &statbuf->st_blksize);
-	err |= __put_user(stat->blocks, &statbuf->st_blocks);
-	err |= __put_user(0, &statbuf->__unused4[0]);
-	err |= __put_user(0, &statbuf->__unused4[1]);
-
-	return err;
-}
-
 /* Note: it is necessary to treat option as an unsigned int,
  * with the corresponding cast to a signed int to insure that the 
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
@@ -107,77 +71,6 @@ asmlinkage long compat_sys_sysfs(u32 option, u32 arg1, u32 arg2)
 	return sys_sysfs((int)option, arg1, arg2);
 }
 
-asmlinkage long compat_sys_pause(void)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	
-	return -ERESTARTNOHAND;
-}
-
-static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
-{
-	long usec;
-
-	if (!access_ok(VERIFY_READ, i, sizeof(*i)))
-		return -EFAULT;
-	if (__get_user(o->tv_sec, &i->tv_sec))
-		return -EFAULT;
-	if (__get_user(usec, &i->tv_usec))
-		return -EFAULT;
-	o->tv_nsec = usec * 1000;
-	return 0;
-}
-
-static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
-{
-	return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
-		(__put_user(i->tv_sec, &o->tv_sec) |
-		 __put_user(i->tv_usec, &o->tv_usec)));
-}
-
-
-
-
-/* Translations due to time_t size differences.  Which affects all
-   sorts of things, like timeval and itimerval.  */
-extern struct timezone sys_tz;
-
-asmlinkage long compat_sys_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
-{
-	if (tv) {
-		struct timeval ktv;
-		do_gettimeofday(&ktv);
-		if (put_tv32(tv, &ktv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
-			return -EFAULT;
-	}
-	
-	return 0;
-}
-
-
-
-asmlinkage long compat_sys_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
-{
-	struct timespec kts;
-	struct timezone ktz;
-	
- 	if (tv) {
-		if (get_ts32(&kts, tv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_from_user(&ktz, tz, sizeof(ktz)))
-			return -EFAULT;
-	}
-
-	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
-}
-
 #ifdef CONFIG_SYSVIPC
 long compat_sys_ipc(u32 call, u32 first, u32 second, u32 third, compat_uptr_t ptr,
 	       u32 fifth)
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 56d172d..86a2ffc 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -15,18 +15,24 @@
 #include <asm/firmware.h>
 #include <asm/hvcall.h>
 #include <asm/prom.h>
-#include <asm/paca.h>
-#include <asm/lppaca.h>
 #include <asm/machdep.h>
 #include <asm/smp.h>
 
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#include <asm/lppaca.h>
+#endif
+
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 static DEFINE_PER_CPU(struct kobject *, cache_toplevel);
 
-/* SMT stuff */
+/*
+ * SMT snooze delay stuff, 64-bit only for now
+ */
+
+#ifdef CONFIG_PPC64
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
 /* Time in microseconds we delay before sleeping in the idle loop */
 DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
 
@@ -106,7 +112,7 @@ static int __init setup_smt_snooze_delay(char *str)
 }
 __setup("smt-snooze-delay=", setup_smt_snooze_delay);
 
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif /* CONFIG_PPC64 */
 
 /*
  * Enabling PMCs will slow partition context switch times so we only do
@@ -115,7 +121,7 @@ __setup("smt-snooze-delay=", setup_smt_snooze_delay);
 
 static DEFINE_PER_CPU(char, pmcs_enabled);
 
-void ppc64_enable_pmcs(void)
+void ppc_enable_pmcs(void)
 {
 	/* Only need to enable them once */
 	if (__get_cpu_var(pmcs_enabled))
@@ -126,8 +132,9 @@ void ppc64_enable_pmcs(void)
 	if (ppc_md.enable_pmcs)
 		ppc_md.enable_pmcs();
 }
-EXPORT_SYMBOL(ppc64_enable_pmcs);
+EXPORT_SYMBOL(ppc_enable_pmcs);
 
+#if defined(CONFIG_6xx) || defined(CONFIG_PPC64)
 /* XXX convert to rusty's on_one_cpu */
 static unsigned long run_on_cpu(unsigned long cpu,
 			        unsigned long (*func)(unsigned long),
@@ -146,6 +153,7 @@ static unsigned long run_on_cpu(unsigned long cpu,
 
 	return ret;
 }
+#endif
 
 #define SYSFS_PMCSETUP(NAME, ADDRESS) \
 static unsigned long read_##NAME(unsigned long junk) \
@@ -154,7 +162,7 @@ static unsigned long read_##NAME(unsigned long junk) \
 } \
 static unsigned long write_##NAME(unsigned long val) \
 { \
-	ppc64_enable_pmcs(); \
+	ppc_enable_pmcs(); \
 	mtspr(ADDRESS, val); \
 	return 0; \
 } \
@@ -184,28 +192,53 @@ static ssize_t __used \
  * that are implemented on the current processor
  */
 
+#if defined(CONFIG_PPC64)
+#define HAS_PPC_PMC_CLASSIC	1
+#define HAS_PPC_PMC_IBM		1
+#define HAS_PPC_PMC_PA6T	1
+#elif defined(CONFIG_6xx)
+#define HAS_PPC_PMC_CLASSIC	1
+#define HAS_PPC_PMC_IBM		1
+#define HAS_PPC_PMC_G4		1
+#endif
+
+
+#ifdef HAS_PPC_PMC_CLASSIC
 SYSFS_PMCSETUP(mmcr0, SPRN_MMCR0);
 SYSFS_PMCSETUP(mmcr1, SPRN_MMCR1);
-SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
 SYSFS_PMCSETUP(pmc1, SPRN_PMC1);
 SYSFS_PMCSETUP(pmc2, SPRN_PMC2);
 SYSFS_PMCSETUP(pmc3, SPRN_PMC3);
 SYSFS_PMCSETUP(pmc4, SPRN_PMC4);
 SYSFS_PMCSETUP(pmc5, SPRN_PMC5);
 SYSFS_PMCSETUP(pmc6, SPRN_PMC6);
+
+#ifdef HAS_PPC_PMC_G4
+SYSFS_PMCSETUP(mmcr2, SPRN_MMCR2);
+#endif
+
+#ifdef CONFIG_PPC64
 SYSFS_PMCSETUP(pmc7, SPRN_PMC7);
 SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
+
+SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
 SYSFS_PMCSETUP(purr, SPRN_PURR);
 SYSFS_PMCSETUP(spurr, SPRN_SPURR);
 SYSFS_PMCSETUP(dscr, SPRN_DSCR);
 
+static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
+static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
+static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
+static SYSDEV_ATTR(purr, 0600, show_purr, store_purr);
+#endif /* CONFIG_PPC64 */
+
+#ifdef HAS_PPC_PMC_PA6T
 SYSFS_PMCSETUP(pa6t_pmc0, SPRN_PA6T_PMC0);
 SYSFS_PMCSETUP(pa6t_pmc1, SPRN_PA6T_PMC1);
 SYSFS_PMCSETUP(pa6t_pmc2, SPRN_PA6T_PMC2);
 SYSFS_PMCSETUP(pa6t_pmc3, SPRN_PA6T_PMC3);
 SYSFS_PMCSETUP(pa6t_pmc4, SPRN_PA6T_PMC4);
 SYSFS_PMCSETUP(pa6t_pmc5, SPRN_PA6T_PMC5);
-
 #ifdef CONFIG_DEBUG_KERNEL
 SYSFS_PMCSETUP(hid0, SPRN_HID0);
 SYSFS_PMCSETUP(hid1, SPRN_HID1);
@@ -236,28 +269,37 @@ SYSFS_PMCSETUP(tsr1, SPRN_PA6T_TSR1);
 SYSFS_PMCSETUP(tsr2, SPRN_PA6T_TSR2);
 SYSFS_PMCSETUP(tsr3, SPRN_PA6T_TSR3);
 #endif /* CONFIG_DEBUG_KERNEL */
+#endif /* HAS_PPC_PMC_PA6T */
 
-static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
-static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
-static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
-static SYSDEV_ATTR(purr, 0600, show_purr, store_purr);
-
+#ifdef HAS_PPC_PMC_IBM
 static struct sysdev_attribute ibm_common_attrs[] = {
 	_SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
 	_SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
 };
+#endif /* HAS_PPC_PMC_G4 */
+
+#ifdef HAS_PPC_PMC_G4
+static struct sysdev_attribute g4_common_attrs[] = {
+	_SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
+	_SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
+	_SYSDEV_ATTR(mmcr2, 0600, show_mmcr2, store_mmcr2),
+};
+#endif /* HAS_PPC_PMC_G4 */
 
-static struct sysdev_attribute ibm_pmc_attrs[] = {
+static struct sysdev_attribute classic_pmc_attrs[] = {
 	_SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1),
 	_SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2),
 	_SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3),
 	_SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4),
 	_SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5),
 	_SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6),
+#ifdef CONFIG_PPC64
 	_SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7),
 	_SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8),
+#endif
 };
 
+#ifdef HAS_PPC_PMC_PA6T
 static struct sysdev_attribute pa6t_attrs[] = {
 	_SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
 	_SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
@@ -298,6 +340,8 @@ static struct sysdev_attribute pa6t_attrs[] = {
 	_SYSDEV_ATTR(tsr3, 0600, show_tsr3, store_tsr3),
 #endif /* CONFIG_DEBUG_KERNEL */
 };
+#endif /* HAS_PPC_PMC_PA6T */
+#endif /* HAS_PPC_PMC_CLASSIC */
 
 struct cache_desc {
 	struct kobject kobj;
@@ -588,23 +632,36 @@ static void __cpuinit register_cpu_online(unsigned int cpu)
 	struct sysdev_attribute *attrs, *pmc_attrs;
 	int i, nattrs;
 
+#ifdef CONFIG_PPC64
 	if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
 			cpu_has_feature(CPU_FTR_SMT))
 		sysdev_create_file(s, &attr_smt_snooze_delay);
+#endif
 
 	/* PMC stuff */
 	switch (cur_cpu_spec->pmc_type) {
+#ifdef HAS_PPC_PMC_IBM
 	case PPC_PMC_IBM:
 		attrs = ibm_common_attrs;
 		nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute);
-		pmc_attrs = ibm_pmc_attrs;
+		pmc_attrs = classic_pmc_attrs;
 		break;
+#endif /* HAS_PPC_PMC_IBM */
+#ifdef HAS_PPC_PMC_G4
+	case PPC_PMC_G4:
+		attrs = g4_common_attrs;
+		nattrs = sizeof(g4_common_attrs) / sizeof(struct sysdev_attribute);
+		pmc_attrs = classic_pmc_attrs;
+		break;
+#endif /* HAS_PPC_PMC_G4 */
+#ifdef HAS_PPC_PMC_PA6T
 	case PPC_PMC_PA6T:
 		/* PA Semi starts counting at PMC0 */
 		attrs = pa6t_attrs;
 		nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute);
 		pmc_attrs = NULL;
 		break;
+#endif /* HAS_PPC_PMC_PA6T */
 	default:
 		attrs = NULL;
 		nattrs = 0;
@@ -618,6 +675,7 @@ static void __cpuinit register_cpu_online(unsigned int cpu)
 		for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
 			sysdev_create_file(s, &pmc_attrs[i]);
 
+#ifdef CONFIG_PPC64
 	if (cpu_has_feature(CPU_FTR_MMCRA))
 		sysdev_create_file(s, &attr_mmcra);
 
@@ -629,6 +687,7 @@ static void __cpuinit register_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		sysdev_create_file(s, &attr_dscr);
+#endif /* CONFIG_PPC64 */
 
 	create_cache_info(s);
 }
@@ -641,16 +700,9 @@ static void remove_cache_info(struct sys_device *sysdev)
 	int cpu = sysdev->id;
 
 	cache_desc = per_cpu(cache_desc, cpu);
-	if (cache_desc != NULL) {
-		sysfs_remove_file(&cache_desc->kobj, &cache_size_attr.attr);
-		sysfs_remove_file(&cache_desc->kobj, &cache_line_size_attr.attr);
-		sysfs_remove_file(&cache_desc->kobj, &cache_type_attr.attr);
-		sysfs_remove_file(&cache_desc->kobj, &cache_level_attr.attr);
-		sysfs_remove_file(&cache_desc->kobj, &cache_nr_sets_attr.attr);
-		sysfs_remove_file(&cache_desc->kobj, &cache_assoc_attr.attr);
-
+	if (cache_desc != NULL)
 		kobject_put(&cache_desc->kobj);
-	}
+
 	cache_toplevel = per_cpu(cache_toplevel, cpu);
 	if (cache_toplevel != NULL)
 		kobject_put(cache_toplevel);
@@ -671,17 +723,28 @@ static void unregister_cpu_online(unsigned int cpu)
 
 	/* PMC stuff */
 	switch (cur_cpu_spec->pmc_type) {
+#ifdef HAS_PPC_PMC_IBM
 	case PPC_PMC_IBM:
 		attrs = ibm_common_attrs;
 		nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute);
-		pmc_attrs = ibm_pmc_attrs;
+		pmc_attrs = classic_pmc_attrs;
+		break;
+#endif /* HAS_PPC_PMC_IBM */
+#ifdef HAS_PPC_PMC_G4
+	case PPC_PMC_G4:
+		attrs = g4_common_attrs;
+		nattrs = sizeof(g4_common_attrs) / sizeof(struct sysdev_attribute);
+		pmc_attrs = classic_pmc_attrs;
 		break;
+#endif /* HAS_PPC_PMC_G4 */
+#ifdef HAS_PPC_PMC_PA6T
 	case PPC_PMC_PA6T:
 		/* PA Semi starts counting at PMC0 */
 		attrs = pa6t_attrs;
 		nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute);
 		pmc_attrs = NULL;
 		break;
+#endif /* HAS_PPC_PMC_PA6T */
 	default:
 		attrs = NULL;
 		nattrs = 0;
@@ -695,6 +758,7 @@ static void unregister_cpu_online(unsigned int cpu)
 		for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
 			sysdev_remove_file(s, &pmc_attrs[i]);
 
+#ifdef CONFIG_PPC64
 	if (cpu_has_feature(CPU_FTR_MMCRA))
 		sysdev_remove_file(s, &attr_mmcra);
 
@@ -706,6 +770,7 @@ static void unregister_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		sysdev_remove_file(s, &attr_dscr);
+#endif /* CONFIG_PPC64 */
 
 	remove_cache_info(s);
 }
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 81ccb8dd..f5def6c 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -23,7 +23,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/module.h>
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index cb01ebc..7b7da8c 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -142,7 +142,7 @@ unsigned int udbg_probe_uart_speed(void __iomem *comport, unsigned int clock)
 	speed = (clock / prescaler) / (divisor * 16);
 
 	/* sanity check */
-	if (speed < 0 || speed > (clock / 16))
+	if (speed > (clock / 16))
 		speed = 9600;
 
 	return speed;
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 2750fba..434c92a 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1232,7 +1232,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 	else
 		viodev->dev.archdata.dma_ops = &dma_iommu_ops;
 	viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
-	viodev->dev.archdata.numa_node = of_node_to_nid(of_node);
+	set_dev_node(&viodev->dev, of_node_to_nid(of_node));
 
 	/* init generic 'struct device' fields: */
 	viodev->dev.parent = &vio_bus_device.dev;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 9f6c1ca..b39c27e 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -187,6 +187,24 @@ SECTIONS
 		*(.machine.desc)
 		__machine_desc_end = . ;
 	}
+	. = ALIGN(8);
+	.dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { *(.dynsym) }
+	.dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) }
+	.dynamic : AT(ADDR(.dynamic) - LOAD_OFFSET)
+	{
+		__dynamic_start = .;
+		*(.dynamic)
+	}
+	.hash : AT(ADDR(.hash) - LOAD_OFFSET) { *(.hash) }
+	.interp : AT(ADDR(.interp) - LOAD_OFFSET) { *(.interp) }
+	.rela.dyn : AT(ADDR(.rela.dyn) - LOAD_OFFSET)
+	{
+		__rela_dyn_start = .;
+		*(.rela*)
+	}
+
+	/* Fake ELF header containing RPA note; for addnote */
+	.fakeelf : AT(ADDR(.fakeelf) - LOAD_OFFSET) { *(.fakeelf) }
 
 	/* freed after init ends here */
 	. = ALIGN(PAGE_SIZE);
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 5a5602d..2e227a4 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -19,6 +19,7 @@
 
 #include <linux/types.h>
 #include <linux/string.h>
+#include <linux/kvm.h>
 #include <linux/kvm_host.h>
 #include <linux/highmem.h>
 #include <asm/mmu-44x.h>
@@ -109,7 +110,6 @@ static int kvmppc_44x_tlbe_is_writable(struct tlbe *tlbe)
 	return tlbe->word2 & (PPC44x_TLB_SW|PPC44x_TLB_UW);
 }
 
-/* Must be called with mmap_sem locked for writing. */
 static void kvmppc_44x_shadow_release(struct kvm_vcpu *vcpu,
                                       unsigned int index)
 {
@@ -124,6 +124,11 @@ static void kvmppc_44x_shadow_release(struct kvm_vcpu *vcpu,
 	}
 }
 
+void kvmppc_tlbe_set_modified(struct kvm_vcpu *vcpu, unsigned int i)
+{
+    vcpu->arch.shadow_tlb_mod[i] = 1;
+}
+
 /* Caller must ensure that the specified guest TLB entry is safe to insert into
  * the shadow TLB. */
 void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid,
@@ -142,19 +147,16 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid,
 	stlbe = &vcpu->arch.shadow_tlb[victim];
 
 	/* Get reference to new page. */
-	down_read(&current->mm->mmap_sem);
 	new_page = gfn_to_page(vcpu->kvm, gfn);
 	if (is_error_page(new_page)) {
 		printk(KERN_ERR "Couldn't get guest page for gfn %lx!\n", gfn);
 		kvm_release_page_clean(new_page);
-		up_read(&current->mm->mmap_sem);
 		return;
 	}
 	hpaddr = page_to_phys(new_page);
 
 	/* Drop reference to old page. */
 	kvmppc_44x_shadow_release(vcpu, victim);
-	up_read(&current->mm->mmap_sem);
 
 	vcpu->arch.shadow_pages[victim] = new_page;
 
@@ -164,27 +166,30 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid,
 
 	/* XXX what about AS? */
 
-	stlbe->tid = asid & 0xff;
+	stlbe->tid = !(asid & 0xff);
 
 	/* Force TS=1 for all guest mappings. */
 	/* For now we hardcode 4KB mappings, but it will be important to
 	 * use host large pages in the future. */
 	stlbe->word0 = (gvaddr & PAGE_MASK) | PPC44x_TLB_VALID | PPC44x_TLB_TS
 	               | PPC44x_TLB_4K;
-
 	stlbe->word1 = (hpaddr & 0xfffffc00) | ((hpaddr >> 32) & 0xf);
 	stlbe->word2 = kvmppc_44x_tlb_shadow_attrib(flags,
 	                                            vcpu->arch.msr & MSR_PR);
+	kvmppc_tlbe_set_modified(vcpu, victim);
+
+	KVMTRACE_5D(STLB_WRITE, vcpu, victim,
+			stlbe->tid, stlbe->word0, stlbe->word1, stlbe->word2,
+			handler);
 }
 
 void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
                            gva_t eend, u32 asid)
 {
-	unsigned int pid = asid & 0xff;
+	unsigned int pid = !(asid & 0xff);
 	int i;
 
 	/* XXX Replace loop with fancy data structures. */
-	down_write(&current->mm->mmap_sem);
 	for (i = 0; i <= tlb_44x_hwater; i++) {
 		struct tlbe *stlbe = &vcpu->arch.shadow_tlb[i];
 		unsigned int tid;
@@ -204,21 +209,35 @@ void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
 
 		kvmppc_44x_shadow_release(vcpu, i);
 		stlbe->word0 = 0;
+		kvmppc_tlbe_set_modified(vcpu, i);
+		KVMTRACE_5D(STLB_INVAL, vcpu, i,
+				stlbe->tid, stlbe->word0, stlbe->word1,
+				stlbe->word2, handler);
 	}
-	up_write(&current->mm->mmap_sem);
 }
 
-/* Invalidate all mappings, so that when they fault back in they will get the
- * proper permission bits. */
+/* Invalidate all mappings on the privilege switch after PID has been changed.
+ * The guest always runs with PID=1, so we must clear the entire TLB when
+ * switching address spaces. */
 void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode)
 {
 	int i;
 
-	/* XXX Replace loop with fancy data structures. */
-	down_write(&current->mm->mmap_sem);
-	for (i = 0; i <= tlb_44x_hwater; i++) {
-		kvmppc_44x_shadow_release(vcpu, i);
-		vcpu->arch.shadow_tlb[i].word0 = 0;
+	if (vcpu->arch.swap_pid) {
+		/* XXX Replace loop with fancy data structures. */
+		for (i = 0; i <= tlb_44x_hwater; i++) {
+			struct tlbe *stlbe = &vcpu->arch.shadow_tlb[i];
+
+			/* Future optimization: clear only userspace mappings. */
+			kvmppc_44x_shadow_release(vcpu, i);
+			stlbe->word0 = 0;
+			kvmppc_tlbe_set_modified(vcpu, i);
+			KVMTRACE_5D(STLB_INVAL, vcpu, i,
+			            stlbe->tid, stlbe->word0, stlbe->word1,
+			            stlbe->word2, handler);
+		}
+		vcpu->arch.swap_pid = 0;
 	}
-	up_write(&current->mm->mmap_sem);
+
+	vcpu->arch.shadow_pid = !usermode;
 }
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 6b07601..53aaa66 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -37,6 +37,17 @@ config KVM_BOOKE_HOST
 	  Provides host support for KVM on Book E PowerPC processors. Currently
 	  this works on 440 processors only.
 
+config KVM_TRACE
+	bool "KVM trace support"
+	depends on KVM && MARKERS && SYSFS
+	select RELAY
+	select DEBUG_FS
+	default n
+	---help---
+	  This option allows reading a trace of kvm-related events through
+	  relayfs.  Note the ABI is not considered stable and will be
+	  modified in future updates.
+
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 04e3449..2a5d439 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -4,9 +4,11 @@
 
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
+common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
 
-kvm-objs := $(common-objs) powerpc.o emulate.o booke_guest.o
+common-objs-$(CONFIG_KVM_TRACE)  += $(addprefix ../../../virt/kvm/, kvm_trace.o)
+
+kvm-objs := $(common-objs-y) powerpc.o emulate.o booke_guest.o
 obj-$(CONFIG_KVM) += kvm.o
 
 AFLAGS_booke_interrupts.o := -I$(obj)
diff --git a/arch/powerpc/kvm/booke_guest.c b/arch/powerpc/kvm/booke_guest.c
index 9c8ad85..7b2591e 100644
--- a/arch/powerpc/kvm/booke_guest.c
+++ b/arch/powerpc/kvm/booke_guest.c
@@ -410,6 +410,21 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		break;
 	}
 
+	case BOOKE_INTERRUPT_DEBUG: {
+		u32 dbsr;
+
+		vcpu->arch.pc = mfspr(SPRN_CSRR0);
+
+		/* clear IAC events in DBSR register */
+		dbsr = mfspr(SPRN_DBSR);
+		dbsr &= DBSR_IAC1 | DBSR_IAC2 | DBSR_IAC3 | DBSR_IAC4;
+		mtspr(SPRN_DBSR, dbsr);
+
+		run->exit_reason = KVM_EXIT_DEBUG;
+		r = RESUME_HOST;
+		break;
+	}
+
 	default:
 		printk(KERN_EMERG "exit_nr %d\n", exit_nr);
 		BUG();
@@ -471,6 +486,8 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	vcpu->arch.msr = 0;
 	vcpu->arch.gpr[1] = (16<<20) - 8; /* -8 for the callee-save LR slot */
 
+	vcpu->arch.shadow_pid = 1;
+
 	/* Eye-catching number so we know if the guest takes an interrupt
 	 * before it's programmed its own IVPR. */
 	vcpu->arch.ivpr = 0x55550000;
diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S
index 3b653b5..95e165b 100644
--- a/arch/powerpc/kvm/booke_interrupts.S
+++ b/arch/powerpc/kvm/booke_interrupts.S
@@ -42,7 +42,8 @@
 #define HOST_STACK_LR   (HOST_STACK_SIZE + 4) /* In caller stack frame. */
 
 #define NEED_INST_MASK ((1<<BOOKE_INTERRUPT_PROGRAM) | \
-                        (1<<BOOKE_INTERRUPT_DTLB_MISS))
+                        (1<<BOOKE_INTERRUPT_DTLB_MISS) | \
+                        (1<<BOOKE_INTERRUPT_DEBUG))
 
 #define NEED_DEAR_MASK ((1<<BOOKE_INTERRUPT_DATA_STORAGE) | \
                         (1<<BOOKE_INTERRUPT_DTLB_MISS))
@@ -331,51 +332,57 @@ lightweight_exit:
 
 	mfspr	r3, SPRN_PID
 	stw	r3, VCPU_HOST_PID(r4)
-	lwz	r3, VCPU_PID(r4)
+	lwz	r3, VCPU_SHADOW_PID(r4)
 	mtspr	SPRN_PID, r3
 
-	/* Prevent all TLB updates. */
+	/* Prevent all asynchronous TLB updates. */
 	mfmsr	r5
 	lis	r6, (MSR_EE|MSR_CE|MSR_ME|MSR_DE)@h
 	ori	r6, r6, (MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
 	andc	r6, r5, r6
 	mtmsr	r6
 
-	/* Save the host's non-pinned TLB mappings, and load the guest mappings
-	 * over them. Leave the host's "pinned" kernel mappings in place. */
-	/* XXX optimization: use generation count to avoid swapping unmodified
-	 * entries. */
+	/* Load the guest mappings, leaving the host's "pinned" kernel mappings
+	 * in place. */
 	mfspr	r10, SPRN_MMUCR			/* Save host MMUCR. */
-	lis	r8, tlb_44x_hwater@ha
-	lwz	r8, tlb_44x_hwater@l(r8)
-	addi	r3, r4, VCPU_HOST_TLB - 4
-	addi	r9, r4, VCPU_SHADOW_TLB - 4
-	li	r6, 0
+	li	r5, PPC44x_TLB_SIZE
+	lis	r5, tlb_44x_hwater@ha
+	lwz	r5, tlb_44x_hwater@l(r5)
+	mtctr	r5
+	addi	r9, r4, VCPU_SHADOW_TLB
+	addi	r5, r4, VCPU_SHADOW_MOD
+	li	r3, 0
 1:
-	/* Save host entry. */
-	tlbre	r7, r6, PPC44x_TLB_PAGEID
-	mfspr	r5, SPRN_MMUCR
-	stwu	r5, 4(r3)
-	stwu	r7, 4(r3)
-	tlbre	r7, r6, PPC44x_TLB_XLAT
-	stwu	r7, 4(r3)
-	tlbre	r7, r6, PPC44x_TLB_ATTRIB
-	stwu	r7, 4(r3)
+	lbzx	r7, r3, r5
+	cmpwi	r7, 0
+	beq	3f
+
 	/* Load guest entry. */
-	lwzu	r7, 4(r9)
+	mulli	r11, r3, TLBE_BYTES
+	add	r11, r11, r9
+	lwz	r7, 0(r11)
 	mtspr	SPRN_MMUCR, r7
-	lwzu	r7, 4(r9)
-	tlbwe	r7, r6, PPC44x_TLB_PAGEID
-	lwzu	r7, 4(r9)
-	tlbwe	r7, r6, PPC44x_TLB_XLAT
-	lwzu	r7, 4(r9)
-	tlbwe	r7, r6, PPC44x_TLB_ATTRIB
-	/* Increment index. */
-	addi	r6, r6, 1
-	cmpw	r6, r8
-	blt	1b
+	lwz	r7, 4(r11)
+	tlbwe	r7, r3, PPC44x_TLB_PAGEID
+	lwz	r7, 8(r11)
+	tlbwe	r7, r3, PPC44x_TLB_XLAT
+	lwz	r7, 12(r11)
+	tlbwe	r7, r3, PPC44x_TLB_ATTRIB
+3:
+	addi	r3, r3, 1                       /* Increment index. */
+	bdnz	1b
+
 	mtspr	SPRN_MMUCR, r10			/* Restore host MMUCR. */
 
+	/* Clear bitmap of modified TLB entries */
+	li	r5, PPC44x_TLB_SIZE>>2
+	mtctr	r5
+	addi	r5, r4, VCPU_SHADOW_MOD - 4
+	li	r6, 0
+1:
+	stwu	r6, 4(r5)
+	bdnz	1b
+
 	iccci	0, 0 /* XXX hack */
 
 	/* Load some guest volatiles. */
@@ -431,6 +438,14 @@ lightweight_exit:
 	oris	r3, r3, KVMPPC_MSR_MASK@h
 	ori	r3, r3, KVMPPC_MSR_MASK@l
 	mtsrr1	r3
+
+	/* Clear any debug events which occurred since we disabled MSR[DE].
+	 * XXX This gives us a 3-instruction window in which a breakpoint
+	 * intended for guest context could fire in the host instead. */
+	lis	r3, 0xffff
+	ori	r3, r3, 0xffff
+	mtspr	SPRN_DBSR, r3
+
 	lwz	r3, VCPU_GPR(r3)(r4)
 	lwz	r4, VCPU_GPR(r4)(r4)
 	rfi
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 8c605d0..0fce4fb 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -170,6 +170,10 @@ static int kvmppc_emul_tlbwe(struct kvm_vcpu *vcpu, u32 inst)
 		kvmppc_mmu_map(vcpu, eaddr, raddr >> PAGE_SHIFT, asid, flags);
 	}
 
+	KVMTRACE_5D(GTLB_WRITE, vcpu, index,
+			tlbe->tid, tlbe->word0, tlbe->word1, tlbe->word2,
+			handler);
+
 	return EMULATE_DONE;
 }
 
@@ -504,7 +508,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			case SPRN_MMUCR:
 				vcpu->arch.mmucr = vcpu->arch.gpr[rs]; break;
 			case SPRN_PID:
-				vcpu->arch.pid = vcpu->arch.gpr[rs]; break;
+				kvmppc_set_pid(vcpu, vcpu->arch.gpr[rs]); break;
 			case SPRN_CCR0:
 				vcpu->arch.ccr0 = vcpu->arch.gpr[rs]; break;
 			case SPRN_CCR1:
@@ -765,6 +769,8 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		break;
 	}
 
+	KVMTRACE_3D(PPC_INSTR, vcpu, inst, vcpu->arch.pc, emulated, entryexit);
+
 	if (advance)
 		vcpu->arch.pc += 4; /* Advance past emulated instruction. */
 
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 53826a5..90a6fc4 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -27,6 +27,7 @@
 #include <asm/cputable.h>
 #include <asm/uaccess.h>
 #include <asm/kvm_ppc.h>
+#include <asm/tlbflush.h>
 
 
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
@@ -239,18 +240,114 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 {
 }
 
+/* Note: clearing MSR[DE] just means that the debug interrupt will not be
+ * delivered *immediately*. Instead, it simply sets the appropriate DBSR bits.
+ * If those DBSR bits are still set when MSR[DE] is re-enabled, the interrupt
+ * will be delivered as an "imprecise debug event" (which is indicated by
+ * DBSR[IDE].
+ */
+static void kvmppc_disable_debug_interrupts(void)
+{
+	mtmsr(mfmsr() & ~MSR_DE);
+}
+
+static void kvmppc_restore_host_debug_state(struct kvm_vcpu *vcpu)
+{
+	kvmppc_disable_debug_interrupts();
+
+	mtspr(SPRN_IAC1, vcpu->arch.host_iac[0]);
+	mtspr(SPRN_IAC2, vcpu->arch.host_iac[1]);
+	mtspr(SPRN_IAC3, vcpu->arch.host_iac[2]);
+	mtspr(SPRN_IAC4, vcpu->arch.host_iac[3]);
+	mtspr(SPRN_DBCR1, vcpu->arch.host_dbcr1);
+	mtspr(SPRN_DBCR2, vcpu->arch.host_dbcr2);
+	mtspr(SPRN_DBCR0, vcpu->arch.host_dbcr0);
+	mtmsr(vcpu->arch.host_msr);
+}
+
+static void kvmppc_load_guest_debug_registers(struct kvm_vcpu *vcpu)
+{
+	struct kvm_guest_debug *dbg = &vcpu->guest_debug;
+	u32 dbcr0 = 0;
+
+	vcpu->arch.host_msr = mfmsr();
+	kvmppc_disable_debug_interrupts();
+
+	/* Save host debug register state. */
+	vcpu->arch.host_iac[0] = mfspr(SPRN_IAC1);
+	vcpu->arch.host_iac[1] = mfspr(SPRN_IAC2);
+	vcpu->arch.host_iac[2] = mfspr(SPRN_IAC3);
+	vcpu->arch.host_iac[3] = mfspr(SPRN_IAC4);
+	vcpu->arch.host_dbcr0 = mfspr(SPRN_DBCR0);
+	vcpu->arch.host_dbcr1 = mfspr(SPRN_DBCR1);
+	vcpu->arch.host_dbcr2 = mfspr(SPRN_DBCR2);
+
+	/* set registers up for guest */
+
+	if (dbg->bp[0]) {
+		mtspr(SPRN_IAC1, dbg->bp[0]);
+		dbcr0 |= DBCR0_IAC1 | DBCR0_IDM;
+	}
+	if (dbg->bp[1]) {
+		mtspr(SPRN_IAC2, dbg->bp[1]);
+		dbcr0 |= DBCR0_IAC2 | DBCR0_IDM;
+	}
+	if (dbg->bp[2]) {
+		mtspr(SPRN_IAC3, dbg->bp[2]);
+		dbcr0 |= DBCR0_IAC3 | DBCR0_IDM;
+	}
+	if (dbg->bp[3]) {
+		mtspr(SPRN_IAC4, dbg->bp[3]);
+		dbcr0 |= DBCR0_IAC4 | DBCR0_IDM;
+	}
+
+	mtspr(SPRN_DBCR0, dbcr0);
+	mtspr(SPRN_DBCR1, 0);
+	mtspr(SPRN_DBCR2, 0);
+}
+
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
+	int i;
+
+	if (vcpu->guest_debug.enabled)
+		kvmppc_load_guest_debug_registers(vcpu);
+
+	/* Mark every guest entry in the shadow TLB entry modified, so that they
+	 * will all be reloaded on the next vcpu run (instead of being
+	 * demand-faulted). */
+	for (i = 0; i <= tlb_44x_hwater; i++)
+		kvmppc_tlbe_set_modified(vcpu, i);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
+	if (vcpu->guest_debug.enabled)
+		kvmppc_restore_host_debug_state(vcpu);
+
+	/* Don't leave guest TLB entries resident when being de-scheduled. */
+	/* XXX It would be nice to differentiate between heavyweight exit and
+	 * sched_out here, since we could avoid the TLB flush for heavyweight
+	 * exits. */
+	_tlbia();
 }
 
 int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
                                     struct kvm_debug_guest *dbg)
 {
-	return -ENOTSUPP;
+	int i;
+
+	vcpu->guest_debug.enabled = dbg->enabled;
+	if (vcpu->guest_debug.enabled) {
+		for (i=0; i < ARRAY_SIZE(vcpu->guest_debug.bp); i++) {
+			if (dbg->breakpoints[i].enabled)
+				vcpu->guest_debug.bp[i] = dbg->breakpoints[i].address;
+			else
+				vcpu->guest_debug.bp[i] = 0;
+		}
+	}
+
+	return 0;
 }
 
 static void kvmppc_complete_dcr_load(struct kvm_vcpu *vcpu,
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index f9837f4..75f3267 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ * Copyright (C) 2008 Mark Nelson, IBM Corp.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -8,112 +8,100 @@
  */
 #include <asm/processor.h>
 #include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+        .section        ".toc","aw"
+PPC64_CACHES:
+        .tc             ppc64_caches[TC],ppc64_caches
+        .section        ".text"
+
 
 _GLOBAL(copy_4K_page)
-	std	r31,-8(1)
-	std	r30,-16(1)
-	std	r29,-24(1)
-	std	r28,-32(1)
-	std	r27,-40(1)
-	std	r26,-48(1)
-	std	r25,-56(1)
-	std	r24,-64(1)
-	std	r23,-72(1)
-	std	r22,-80(1)
-	std	r21,-88(1)
-	std	r20,-96(1)
-	li	r5,4096/32 - 1
+	li	r5,4096		/* 4K page size */
+BEGIN_FTR_SECTION
+	ld      r10,PPC64_CACHES@toc(r2)
+	lwz	r11,DCACHEL1LOGLINESIZE(r10)	/* log2 of cache line size */
+	lwz     r12,DCACHEL1LINESIZE(r10)	/* get cache line size */
+	li	r9,0
+	srd	r8,r5,r11
+
+	mtctr	r8
+setup:
+	dcbt	r9,r4
+	dcbz	r9,r3
+	add	r9,r9,r12
+	bdnz	setup
+END_FTR_SECTION_IFSET(CPU_FTR_CP_USE_DCBTZ)
 	addi	r3,r3,-8
-	li	r12,5
-0:	addi	r5,r5,-24
-	mtctr	r12
-	ld	r22,640(4)
-	ld	r21,512(4)
-	ld	r20,384(4)
-	ld	r11,256(4)
-	ld	r9,128(4)
-	ld	r7,0(4)
-	ld	r25,648(4)
-	ld	r24,520(4)
-	ld	r23,392(4)
-	ld	r10,264(4)
-	ld	r8,136(4)
-	ldu	r6,8(4)
-	cmpwi	r5,24
-1:	std	r22,648(3)
-	std	r21,520(3)
-	std	r20,392(3)
-	std	r11,264(3)
-	std	r9,136(3)
-	std	r7,8(3)
-	ld	r28,648(4)
-	ld	r27,520(4)
-	ld	r26,392(4)
-	ld	r31,264(4)
-	ld	r30,136(4)
-	ld	r29,8(4)
-	std	r25,656(3)
-	std	r24,528(3)
-	std	r23,400(3)
-	std	r10,272(3)
-	std	r8,144(3)
-	std	r6,16(3)
-	ld	r22,656(4)
-	ld	r21,528(4)
-	ld	r20,400(4)
-	ld	r11,272(4)
-	ld	r9,144(4)
-	ld	r7,16(4)
-	std	r28,664(3)
-	std	r27,536(3)
-	std	r26,408(3)
-	std	r31,280(3)
-	std	r30,152(3)
-	stdu	r29,24(3)
-	ld	r25,664(4)
-	ld	r24,536(4)
-	ld	r23,408(4)
-	ld	r10,280(4)
-	ld	r8,152(4)
-	ldu	r6,24(4)
+	srdi    r8,r5,7		/* page is copied in 128 byte strides */
+	addi	r8,r8,-1	/* one stride copied outside loop */
+
+	mtctr	r8
+
+	ld	r5,0(r4)
+	ld	r6,8(r4)
+	ld	r7,16(r4)
+	ldu	r8,24(r4)
+1:	std	r5,8(r3)
+	ld	r9,8(r4)
+	std	r6,16(r3)
+	ld	r10,16(r4)
+	std	r7,24(r3)
+	ld	r11,24(r4)
+	std	r8,32(r3)
+	ld	r12,32(r4)
+	std	r9,40(r3)
+	ld	r5,40(r4)
+	std	r10,48(r3)
+	ld	r6,48(r4)
+	std	r11,56(r3)
+	ld	r7,56(r4)
+	std	r12,64(r3)
+	ld	r8,64(r4)
+	std	r5,72(r3)
+	ld	r9,72(r4)
+	std	r6,80(r3)
+	ld	r10,80(r4)
+	std	r7,88(r3)
+	ld	r11,88(r4)
+	std	r8,96(r3)
+	ld	r12,96(r4)
+	std	r9,104(r3)
+	ld	r5,104(r4)
+	std	r10,112(r3)
+	ld	r6,112(r4)
+	std	r11,120(r3)
+	ld	r7,120(r4)
+	stdu	r12,128(r3)
+	ldu	r8,128(r4)
 	bdnz	1b
-	std	r22,648(3)
-	std	r21,520(3)
-	std	r20,392(3)
-	std	r11,264(3)
-	std	r9,136(3)
-	std	r7,8(3)
-	addi	r4,r4,640
-	addi	r3,r3,648
-	bge	0b
-	mtctr	r5
-	ld	r7,0(4)
-	ld	r8,8(4)
-	ldu	r9,16(4)
-3:	ld	r10,8(4)
-	std	r7,8(3)
-	ld	r7,16(4)
-	std	r8,16(3)
-	ld	r8,24(4)
-	std	r9,24(3)
-	ldu	r9,32(4)
-	stdu	r10,32(3)
-	bdnz	3b
-4:	ld	r10,8(4)
-	std	r7,8(3)
-	std	r8,16(3)
-	std	r9,24(3)
-	std	r10,32(3)
-9:	ld	r20,-96(1)
-	ld	r21,-88(1)
-	ld	r22,-80(1)
-	ld	r23,-72(1)
-	ld	r24,-64(1)
-	ld	r25,-56(1)
-	ld	r26,-48(1)
-	ld	r27,-40(1)
-	ld	r28,-32(1)
-	ld	r29,-24(1)
-	ld	r30,-16(1)
-	ld	r31,-8(1)
+
+	std	r5,8(r3)
+	ld	r9,8(r4)
+	std	r6,16(r3)
+	ld	r10,16(r4)
+	std	r7,24(r3)
+	ld	r11,24(r4)
+	std	r8,32(r3)
+	ld	r12,32(r4)
+	std	r9,40(r3)
+	ld	r5,40(r4)
+	std	r10,48(r3)
+	ld	r6,48(r4)
+	std	r11,56(r3)
+	ld	r7,56(r4)
+	std	r12,64(r3)
+	ld	r8,64(r4)
+	std	r5,72(r3)
+	ld	r9,72(r4)
+	std	r6,80(r3)
+	ld	r10,80(r4)
+	std	r7,88(r3)
+	ld	r11,88(r4)
+	std	r8,96(r3)
+	ld	r12,96(r4)
+	std	r9,104(r3)
+	std	r10,112(r3)
+	std	r11,120(r3)
+	std	r12,128(r3)
 	blr
diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c
index 5d83907..31734c0 100644
--- a/arch/powerpc/lib/dma-noncoherent.c
+++ b/arch/powerpc/lib/dma-noncoherent.c
@@ -203,7 +203,7 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
 		/*
 		 * Set the "dma handle"
 		 */
-		*handle = page_to_bus(page);
+		*handle = page_to_phys(page);
 
 		do {
 			BUG_ON(!pte_none(*pte));
diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile
index 29bc912..03aa98d 100644
--- a/arch/powerpc/math-emu/Makefile
+++ b/arch/powerpc/math-emu/Makefile
@@ -4,13 +4,14 @@ obj-y				:= math.o fmr.o lfd.o stfd.o
 obj-$(CONFIG_MATH_EMULATION)	+= fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \
 					fctiw.o fctiwz.o fdiv.o fdivs.o \
 					fmadd.o fmadds.o fmsub.o fmsubs.o \
-					fmul.o fmuls.o fnabs.o fneg.o types.o \
+					fmul.o fmuls.o fnabs.o fneg.o \
 					fnmadd.o fnmadds.o fnmsub.o fnmsubs.o \
 					fres.o frsp.o frsqrte.o fsel.o lfs.o \
 					fsqrt.o	fsqrts.o fsub.o fsubs.o \
 					mcrfs.o mffs.o mtfsb0.o mtfsb1.o \
-					mtfsf.o mtfsfi.o stfiwx.o stfs.o \
-					udivmodti4.o
+					mtfsf.o mtfsfi.o stfiwx.o stfs.o
 
 CFLAGS_fabs.o = -fno-builtin-fabs
 CFLAGS_math.o = -fno-builtin-fabs
+
+EXTRA_CFLAGS = -I. -Iinclude/math-emu -w
diff --git a/arch/powerpc/math-emu/double.h b/arch/powerpc/math-emu/double.h
deleted file mode 100644
index ffba8b6..0000000
--- a/arch/powerpc/math-emu/double.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Definitions for IEEE Double Precision
- */
-
-#if _FP_W_TYPE_SIZE < 32
-#error "Here's a nickel kid.  Go buy yourself a real computer."
-#endif
-
-#if _FP_W_TYPE_SIZE < 64
-#define _FP_FRACTBITS_D		(2 * _FP_W_TYPE_SIZE)
-#else
-#define _FP_FRACTBITS_D		_FP_W_TYPE_SIZE
-#endif
-
-#define _FP_FRACBITS_D		53
-#define _FP_FRACXBITS_D		(_FP_FRACTBITS_D - _FP_FRACBITS_D)
-#define _FP_WFRACBITS_D		(_FP_WORKBITS + _FP_FRACBITS_D)
-#define _FP_WFRACXBITS_D	(_FP_FRACTBITS_D - _FP_WFRACBITS_D)
-#define _FP_EXPBITS_D		11
-#define _FP_EXPBIAS_D		1023
-#define _FP_EXPMAX_D		2047
-
-#define _FP_QNANBIT_D		\
-	((_FP_W_TYPE)1 << ((_FP_FRACBITS_D-2) % _FP_W_TYPE_SIZE))
-#define _FP_IMPLBIT_D		\
-	((_FP_W_TYPE)1 << ((_FP_FRACBITS_D-1) % _FP_W_TYPE_SIZE))
-#define _FP_OVERFLOW_D		\
-	((_FP_W_TYPE)1 << (_FP_WFRACBITS_D % _FP_W_TYPE_SIZE))
-
-#if _FP_W_TYPE_SIZE < 64
-
-union _FP_UNION_D
-{
-  double flt;
-  struct {
-#if __BYTE_ORDER == __BIG_ENDIAN
-    unsigned sign  : 1;
-    unsigned exp   : _FP_EXPBITS_D;
-    unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE;
-    unsigned frac0 : _FP_W_TYPE_SIZE;
-#else
-    unsigned frac0 : _FP_W_TYPE_SIZE;
-    unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE;
-    unsigned exp   : _FP_EXPBITS_D;
-    unsigned sign  : 1;
-#endif
-  } bits __attribute__((packed));
-};
-
-#define FP_DECL_D(X)		_FP_DECL(2,X)
-#define FP_UNPACK_RAW_D(X,val)	_FP_UNPACK_RAW_2(D,X,val)
-#define FP_PACK_RAW_D(val,X)	_FP_PACK_RAW_2(D,val,X)
-
-#define FP_UNPACK_D(X,val)		\
-  do {					\
-    _FP_UNPACK_RAW_2(D,X,val);		\
-    _FP_UNPACK_CANONICAL(D,2,X);	\
-  } while (0)
-
-#define FP_PACK_D(val,X)		\
-  do {					\
-    _FP_PACK_CANONICAL(D,2,X);		\
-    _FP_PACK_RAW_2(D,val,X);		\
-  } while (0)
-
-#define FP_NEG_D(R,X)		_FP_NEG(D,2,R,X)
-#define FP_ADD_D(R,X,Y)		_FP_ADD(D,2,R,X,Y)
-#define FP_SUB_D(R,X,Y)		_FP_SUB(D,2,R,X,Y)
-#define FP_MUL_D(R,X,Y)		_FP_MUL(D,2,R,X,Y)
-#define FP_DIV_D(R,X,Y)		_FP_DIV(D,2,R,X,Y)
-#define FP_SQRT_D(R,X)		_FP_SQRT(D,2,R,X)
-
-#define FP_CMP_D(r,X,Y,un)	_FP_CMP(D,2,r,X,Y,un)
-#define FP_CMP_EQ_D(r,X,Y)	_FP_CMP_EQ(D,2,r,X,Y)
-
-#define FP_TO_INT_D(r,X,rsz,rsg)  _FP_TO_INT(D,2,r,X,rsz,rsg)
-#define FP_FROM_INT_D(X,r,rs,rt)  _FP_FROM_INT(D,2,X,r,rs,rt)
-
-#else
-
-union _FP_UNION_D
-{
-  double flt;
-  struct {
-#if __BYTE_ORDER == __BIG_ENDIAN
-    unsigned sign : 1;
-    unsigned exp  : _FP_EXPBITS_D;
-    unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0);
-#else
-    unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0);
-    unsigned exp  : _FP_EXPBITS_D;
-    unsigned sign : 1;
-#endif
-  } bits __attribute__((packed));
-};
-
-#define FP_DECL_D(X)		_FP_DECL(1,X)
-#define FP_UNPACK_RAW_D(X,val)	_FP_UNPACK_RAW_1(D,X,val)
-#define FP_PACK_RAW_D(val,X)	_FP_PACK_RAW_1(D,val,X)
-
-#define FP_UNPACK_D(X,val)		\
-  do {					\
-    _FP_UNPACK_RAW_1(D,X,val);		\
-    _FP_UNPACK_CANONICAL(D,1,X);	\
-  } while (0)
-
-#define FP_PACK_D(val,X)		\
-  do {					\
-    _FP_PACK_CANONICAL(D,1,X);		\
-    _FP_PACK_RAW_1(D,val,X);		\
-  } while (0)
-
-#define FP_NEG_D(R,X)		_FP_NEG(D,1,R,X)
-#define FP_ADD_D(R,X,Y)		_FP_ADD(D,1,R,X,Y)
-#define FP_SUB_D(R,X,Y)		_FP_SUB(D,1,R,X,Y)
-#define FP_MUL_D(R,X,Y)		_FP_MUL(D,1,R,X,Y)
-#define FP_DIV_D(R,X,Y)		_FP_DIV(D,1,R,X,Y)
-#define FP_SQRT_D(R,X)		_FP_SQRT(D,1,R,X)
-
-/* The implementation of _FP_MUL_D and _FP_DIV_D should be chosen by
-   the target machine.  */
-
-#define FP_CMP_D(r,X,Y,un)	_FP_CMP(D,1,r,X,Y,un)
-#define FP_CMP_EQ_D(r,X,Y)	_FP_CMP_EQ(D,1,r,X,Y)
-
-#define FP_TO_INT_D(r,X,rsz,rsg)  _FP_TO_INT(D,1,r,X,rsz,rsg)
-#define FP_FROM_INT_D(X,r,rs,rt)  _FP_FROM_INT(D,1,X,r,rs,rt)
-
-#endif /* W_TYPE_SIZE < 64 */
diff --git a/arch/powerpc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c
index 7befbbf..04d3b4a 100644
--- a/arch/powerpc/math-emu/fadd.c
+++ b/arch/powerpc/math-emu/fadd.c
@@ -2,8 +2,9 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fadd(void *frD, void *frA, void *frB)
@@ -11,28 +12,28 @@ fadd(void *frD, void *frA, void *frB)
 	FP_DECL_D(A);
 	FP_DECL_D(B);
 	FP_DECL_D(R);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
 	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
 #endif
 
-	if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
 	FP_ADD_D(R, A, B);
 
 #ifdef DEBUG
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_D(frD, R));
+	__FP_PACK_D(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fadds.c b/arch/powerpc/math-emu/fadds.c
index 2b346b3..5930f40 100644
--- a/arch/powerpc/math-emu/fadds.c
+++ b/arch/powerpc/math-emu/fadds.c
@@ -2,9 +2,10 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 fadds(void *frD, void *frA, void *frB)
@@ -12,28 +13,27 @@ fadds(void *frD, void *frA, void *frB)
 	FP_DECL_D(A);
 	FP_DECL_D(B);
 	FP_DECL_D(R);
-	int ret = 0;
+	FP_DECL_EX;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
 	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
 #endif
 
-	if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
 	FP_ADD_D(R, A, B);
 
 #ifdef DEBUG
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_DS(frD, R));
+	__FP_PACK_DS(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c
index 36d6890..b5dc449 100644
--- a/arch/powerpc/math-emu/fcmpo.c
+++ b/arch/powerpc/math-emu/fcmpo.c
@@ -2,14 +2,16 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fcmpo(u32 *ccr, int crfD, void *frA, void *frB)
 {
 	FP_DECL_D(A);
 	FP_DECL_D(B);
+	FP_DECL_EX;
 	int code[4] = { (1 << 3), (1 << 1), (1 << 2), (1 << 0) };
 	long cmp;
 	int ret = 0;
@@ -18,8 +20,8 @@ fcmpo(u32 *ccr, int crfD, void *frA, void *frB)
 	printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
diff --git a/arch/powerpc/math-emu/fcmpu.c b/arch/powerpc/math-emu/fcmpu.c
index 53d9389..d4fb1ba 100644
--- a/arch/powerpc/math-emu/fcmpu.c
+++ b/arch/powerpc/math-emu/fcmpu.c
@@ -2,14 +2,16 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fcmpu(u32 *ccr, int crfD, void *frA, void *frB)
 {
 	FP_DECL_D(A);
 	FP_DECL_D(B);
+	FP_DECL_EX;
 	int code[4] = { (1 << 3), (1 << 1), (1 << 2), (1 << 0) };
 	long cmp;
 
@@ -17,8 +19,8 @@ fcmpu(u32 *ccr, int crfD, void *frA, void *frB)
 	printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
diff --git a/arch/powerpc/math-emu/fctiw.c b/arch/powerpc/math-emu/fctiw.c
index fcd7a95..f694440 100644
--- a/arch/powerpc/math-emu/fctiw.c
+++ b/arch/powerpc/math-emu/fctiw.c
@@ -2,16 +2,18 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fctiw(u32 *frD, void *frB)
 {
 	FP_DECL_D(B);
+	FP_DECL_EX;
 	unsigned int r;
 
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(B, frB);
 	FP_TO_INT_D(r, B, 32, 1);
 	frD[1] = r;
 
diff --git a/arch/powerpc/math-emu/fctiwz.c b/arch/powerpc/math-emu/fctiwz.c
index 1514d59..71e782f 100644
--- a/arch/powerpc/math-emu/fctiwz.c
+++ b/arch/powerpc/math-emu/fctiwz.c
@@ -2,13 +2,15 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fctiwz(u32 *frD, void *frB)
 {
 	FP_DECL_D(B);
+	FP_DECL_EX;
 	u32 fpscr;
 	unsigned int r;
 
@@ -16,7 +18,7 @@ fctiwz(u32 *frD, void *frB)
 	__FPU_FPSCR &= ~(3);
 	__FPU_FPSCR |= FP_RND_ZERO;
 
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(B, frB);
 	FP_TO_INT_D(r, B, 32, 1);
 	frD[1] = r;
 
diff --git a/arch/powerpc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c
index 18a20fe..2db1509 100644
--- a/arch/powerpc/math-emu/fdiv.c
+++ b/arch/powerpc/math-emu/fdiv.c
@@ -2,8 +2,9 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fdiv(void *frD, void *frA, void *frB)
@@ -11,14 +12,15 @@ fdiv(void *frD, void *frA, void *frB)
 	FP_DECL_D(A);
 	FP_DECL_D(B);
 	FP_DECL_D(R);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -49,5 +51,7 @@ fdiv(void *frD, void *frA, void *frB)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_D(frD, R));
+	__FP_PACK_D(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c
index 24feed6..797f6a9 100644
--- a/arch/powerpc/math-emu/fdivs.c
+++ b/arch/powerpc/math-emu/fdivs.c
@@ -2,9 +2,10 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 fdivs(void *frD, void *frA, void *frB)
@@ -12,14 +13,15 @@ fdivs(void *frD, void *frA, void *frB)
 	FP_DECL_D(A);
 	FP_DECL_D(B);
 	FP_DECL_D(R);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -51,5 +53,7 @@ fdivs(void *frD, void *frA, void *frB)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_DS(frD, R));
+	__FP_PACK_DS(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c
index dedb465..925313a 100644
--- a/arch/powerpc/math-emu/fmadd.c
+++ b/arch/powerpc/math-emu/fmadd.c
@@ -2,8 +2,9 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fmadd(void *frD, void *frA, void *frB, void *frC)
@@ -13,15 +14,16 @@ fmadd(void *frD, void *frA, void *frB, void *frC)
 	FP_DECL_D(B);
 	FP_DECL_D(C);
 	FP_DECL_D(T);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
+	FP_UNPACK_DP(C, frC);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -44,5 +46,7 @@ fmadd(void *frD, void *frA, void *frB, void *frC)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_D(frD, R));
+	__FP_PACK_D(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c
index 6bbb56d..aea80ef 100644
--- a/arch/powerpc/math-emu/fmadds.c
+++ b/arch/powerpc/math-emu/fmadds.c
@@ -2,9 +2,10 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 fmadds(void *frD, void *frA, void *frB, void *frC)
@@ -14,15 +15,16 @@ fmadds(void *frD, void *frA, void *frB, void *frC)
 	FP_DECL_D(B);
 	FP_DECL_D(C);
 	FP_DECL_D(T);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
+	FP_UNPACK_DP(C, frC);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -45,5 +47,7 @@ fmadds(void *frD, void *frA, void *frB, void *frC)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_DS(frD, R));
+	__FP_PACK_DS(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c
index f311e2c..a644d52 100644
--- a/arch/powerpc/math-emu/fmsub.c
+++ b/arch/powerpc/math-emu/fmsub.c
@@ -2,8 +2,9 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fmsub(void *frD, void *frA, void *frB, void *frC)
@@ -13,15 +14,16 @@ fmsub(void *frD, void *frA, void *frB, void *frC)
 	FP_DECL_D(B);
 	FP_DECL_D(C);
 	FP_DECL_D(T);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
+	FP_UNPACK_DP(C, frC);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -47,5 +49,7 @@ fmsub(void *frD, void *frA, void *frB, void *frC)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_D(frD, R));
+	__FP_PACK_D(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c
index 81a716d..2fdeeb9 100644
--- a/arch/powerpc/math-emu/fmsubs.c
+++ b/arch/powerpc/math-emu/fmsubs.c
@@ -2,9 +2,10 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 fmsubs(void *frD, void *frA, void *frB, void *frC)
@@ -14,15 +15,16 @@ fmsubs(void *frD, void *frA, void *frB, void *frC)
 	FP_DECL_D(B);
 	FP_DECL_D(C);
 	FP_DECL_D(T);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
+	FP_UNPACK_DP(C, frC);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -48,5 +50,7 @@ fmsubs(void *frD, void *frA, void *frB, void *frC)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_DS(frD, R));
+	__FP_PACK_DS(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c
index 2f3d327..391fd17 100644
--- a/arch/powerpc/math-emu/fmul.c
+++ b/arch/powerpc/math-emu/fmul.c
@@ -2,8 +2,9 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fmul(void *frD, void *frA, void *frB)
@@ -11,14 +12,15 @@ fmul(void *frD, void *frA, void *frB)
 	FP_DECL_D(A);
 	FP_DECL_D(B);
 	FP_DECL_D(R);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
@@ -38,5 +40,7 @@ fmul(void *frD, void *frA, void *frB)
 	       R_s, R_f1, R_f0, R_e, R_c, R_f1, R_f0, R_e + 1023);
 #endif
 
-	return (ret | __FP_PACK_D(frD, R));
+	__FP_PACK_D(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c
index 962b588..2d3ec5f 100644
--- a/arch/powerpc/math-emu/fmuls.c
+++ b/arch/powerpc/math-emu/fmuls.c
@@ -2,9 +2,10 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 fmuls(void *frD, void *frA, void *frB)
@@ -12,14 +13,15 @@ fmuls(void *frD, void *frA, void *frB)
 	FP_DECL_D(A);
 	FP_DECL_D(B);
 	FP_DECL_D(R);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
@@ -39,5 +41,7 @@ fmuls(void *frD, void *frA, void *frB)
 	       R_s, R_f1, R_f0, R_e, R_c, R_f1, R_f0, R_e + 1023);
 #endif
 
-	return (ret | __FP_PACK_DS(frD, R));
+	__FP_PACK_DS(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c
index 8cf7827..2497b86 100644
--- a/arch/powerpc/math-emu/fnmadd.c
+++ b/arch/powerpc/math-emu/fnmadd.c
@@ -2,8 +2,9 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fnmadd(void *frD, void *frA, void *frB, void *frC)
@@ -13,15 +14,16 @@ fnmadd(void *frD, void *frA, void *frB, void *frC)
 	FP_DECL_D(B);
 	FP_DECL_D(C);
 	FP_DECL_D(T);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
+	FP_UNPACK_DP(C, frC);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -47,5 +49,7 @@ fnmadd(void *frD, void *frA, void *frB, void *frC)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_D(frD, R));
+	__FP_PACK_D(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c
index f1c4f0f..ee9d71e 100644
--- a/arch/powerpc/math-emu/fnmadds.c
+++ b/arch/powerpc/math-emu/fnmadds.c
@@ -2,9 +2,10 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 fnmadds(void *frD, void *frA, void *frB, void *frC)
@@ -14,15 +15,16 @@ fnmadds(void *frD, void *frA, void *frB, void *frC)
 	FP_DECL_D(B);
 	FP_DECL_D(C);
 	FP_DECL_D(T);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
+	FP_UNPACK_DP(C, frC);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -48,5 +50,7 @@ fnmadds(void *frD, void *frA, void *frB, void *frC)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_DS(frD, R));
+	__FP_PACK_DS(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c
index 98944e6..3885a77 100644
--- a/arch/powerpc/math-emu/fnmsub.c
+++ b/arch/powerpc/math-emu/fnmsub.c
@@ -2,8 +2,9 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fnmsub(void *frD, void *frA, void *frB, void *frC)
@@ -13,15 +14,16 @@ fnmsub(void *frD, void *frA, void *frB, void *frC)
 	FP_DECL_D(B);
 	FP_DECL_D(C);
 	FP_DECL_D(T);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
+	FP_UNPACK_DP(C, frC);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -50,5 +52,7 @@ fnmsub(void *frD, void *frA, void *frB, void *frC)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_D(frD, R));
+	__FP_PACK_D(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c
index b20f4eb..f835dfe 100644
--- a/arch/powerpc/math-emu/fnmsubs.c
+++ b/arch/powerpc/math-emu/fnmsubs.c
@@ -2,9 +2,10 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 fnmsubs(void *frD, void *frA, void *frB, void *frC)
@@ -14,15 +15,16 @@ fnmsubs(void *frD, void *frA, void *frB, void *frC)
 	FP_DECL_D(B);
 	FP_DECL_D(C);
 	FP_DECL_D(T);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
+	FP_UNPACK_DP(C, frC);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -51,5 +53,7 @@ fnmsubs(void *frD, void *frA, void *frB, void *frC)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_DS(frD, R));
+	__FP_PACK_DS(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/frsp.c b/arch/powerpc/math-emu/frsp.c
index 724ccbc..ddcc146 100644
--- a/arch/powerpc/math-emu/frsp.c
+++ b/arch/powerpc/math-emu/frsp.c
@@ -2,24 +2,28 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 frsp(void *frD, void *frB)
 {
 	FP_DECL_D(B);
+	FP_DECL_EX;
 
 #ifdef DEBUG
 	printk("%s: D %p, B %p\n", __func__, frD, frB);
 #endif
 
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
 #endif
 
-	return __FP_PACK_DS(frD, B);
+	__FP_PACK_DS(frD, B);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fsel.c b/arch/powerpc/math-emu/fsel.c
index ecb5f28..1b0c144 100644
--- a/arch/powerpc/math-emu/fsel.c
+++ b/arch/powerpc/math-emu/fsel.c
@@ -2,19 +2,21 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fsel(u32 *frD, void *frA, u32 *frB, u32 *frC)
 {
 	FP_DECL_D(A);
+	FP_DECL_EX;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
-	__FP_UNPACK_D(A, frA);
+	FP_UNPACK_DP(A, frA);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
diff --git a/arch/powerpc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c
index 38ec2b7..3e90072 100644
--- a/arch/powerpc/math-emu/fsqrt.c
+++ b/arch/powerpc/math-emu/fsqrt.c
@@ -2,21 +2,23 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fsqrt(void *frD, void *frB)
 {
 	FP_DECL_D(B);
 	FP_DECL_D(R);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frB);
 #endif
 
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
@@ -33,5 +35,7 @@ fsqrt(void *frD, void *frB)
 	printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_D(frD, R));
+	__FP_PACK_D(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c
index 335263e..2843be9 100644
--- a/arch/powerpc/math-emu/fsqrts.c
+++ b/arch/powerpc/math-emu/fsqrts.c
@@ -2,22 +2,24 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 fsqrts(void *frD, void *frB)
 {
 	FP_DECL_D(B);
 	FP_DECL_D(R);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p %p\n", __func__, frD, frB);
 #endif
 
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
@@ -34,5 +36,7 @@ fsqrts(void *frD, void *frB)
 	printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_DS(frD, R));
+	__FP_PACK_DS(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c
index 208d20f..78b0944 100644
--- a/arch/powerpc/math-emu/fsub.c
+++ b/arch/powerpc/math-emu/fsub.c
@@ -2,8 +2,9 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
 
 int
 fsub(void *frD, void *frA, void *frB)
@@ -11,14 +12,15 @@ fsub(void *frD, void *frA, void *frB)
 	FP_DECL_D(A);
 	FP_DECL_D(B);
 	FP_DECL_D(R);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -37,5 +39,7 @@ fsub(void *frD, void *frA, void *frB)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_D(frD, R));
+	__FP_PACK_D(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c
index 0e61b80..d3bf908 100644
--- a/arch/powerpc/math-emu/fsubs.c
+++ b/arch/powerpc/math-emu/fsubs.c
@@ -2,9 +2,10 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 fsubs(void *frD, void *frA, void *frB)
@@ -12,14 +13,15 @@ fsubs(void *frD, void *frA, void *frB)
 	FP_DECL_D(A);
 	FP_DECL_D(B);
 	FP_DECL_D(R);
+	FP_DECL_EX;
 	int ret = 0;
 
 #ifdef DEBUG
 	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
+	FP_UNPACK_DP(A, frA);
+	FP_UNPACK_DP(B, frB);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -38,5 +40,7 @@ fsubs(void *frD, void *frA, void *frB)
 	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return (ret | __FP_PACK_DS(frD, R));
+	__FP_PACK_DS(frD, R);
+
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/lfd.c b/arch/powerpc/math-emu/lfd.c
index 6ec90b5..79ac76d 100644
--- a/arch/powerpc/math-emu/lfd.c
+++ b/arch/powerpc/math-emu/lfd.c
@@ -2,8 +2,8 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "sfp-machine.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/double.h>
 
 int
 lfd(void *frD, void *ea)
diff --git a/arch/powerpc/math-emu/lfs.c b/arch/powerpc/math-emu/lfs.c
index 6f18ebe..434ed27 100644
--- a/arch/powerpc/math-emu/lfs.c
+++ b/arch/powerpc/math-emu/lfs.c
@@ -2,15 +2,17 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 lfs(void *frD, void *ea)
 {
 	FP_DECL_D(R);
 	FP_DECL_S(A);
+	FP_DECL_EX;
 	float f;
 
 #ifdef DEBUG
@@ -20,7 +22,7 @@ lfs(void *frD, void *ea)
 	if (copy_from_user(&f, ea, sizeof(float)))
 		return -EFAULT;
 
-	__FP_UNPACK_S(A, &f);
+	FP_UNPACK_S(A, f);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %ld (%ld) [%08lx]\n", A_s, A_f, A_e, A_c,
@@ -33,5 +35,12 @@ lfs(void *frD, void *ea)
 	printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
 #endif
 
-	return __FP_PACK_D(frD, R);
+	if (R_c == FP_CLS_NAN) {
+		R_e = _FP_EXPMAX_D;
+		_FP_PACK_RAW_2_P(D, frD, R);
+	} else {
+		__FP_PACK_D(frD, R);
+	}
+
+	return 0;
 }
diff --git a/arch/powerpc/math-emu/math.c b/arch/powerpc/math-emu/math.c
index 29e545e..164d559 100644
--- a/arch/powerpc/math-emu/math.c
+++ b/arch/powerpc/math-emu/math.c
@@ -8,8 +8,8 @@
 #include <asm/uaccess.h>
 #include <asm/reg.h>
 
-#include "sfp-machine.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/double.h>
 
 #define FLOATFUNC(x)	extern int x(void *, void *, void *, void *)
 
@@ -168,6 +168,8 @@ record_exception(struct pt_regs *regs, int eflag)
 			fpscr |= FPSCR_ZX;
 		if (eflag & EFLAG_INEXACT)
 			fpscr |= FPSCR_XX;
+		if (eflag & EFLAG_INVALID)
+			fpscr |= FPSCR_VX;
 		if (eflag & EFLAG_VXSNAN)
 			fpscr |= FPSCR_VXSNAN;
 		if (eflag & EFLAG_VXISI)
@@ -188,7 +190,7 @@ record_exception(struct pt_regs *regs, int eflag)
 			fpscr |= FPSCR_VXCVI;
 	}
 
-	fpscr &= ~(FPSCR_VX);
+//	fpscr &= ~(FPSCR_VX);
 	if (fpscr & (FPSCR_VXSNAN | FPSCR_VXISI | FPSCR_VXIDI |
 		     FPSCR_VXZDZ | FPSCR_VXIMZ | FPSCR_VXVC |
 		     FPSCR_VXSOFT | FPSCR_VXSQRT | FPSCR_VXCVI))
diff --git a/arch/powerpc/math-emu/mcrfs.c b/arch/powerpc/math-emu/mcrfs.c
index 41ba247..e948d57 100644
--- a/arch/powerpc/math-emu/mcrfs.c
+++ b/arch/powerpc/math-emu/mcrfs.c
@@ -2,7 +2,8 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
 
 int
 mcrfs(u32 *ccr, u32 crfD, u32 crfS)
diff --git a/arch/powerpc/math-emu/mffs.c b/arch/powerpc/math-emu/mffs.c
index b0e2106..5526cf9 100644
--- a/arch/powerpc/math-emu/mffs.c
+++ b/arch/powerpc/math-emu/mffs.c
@@ -2,7 +2,8 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
 
 int
 mffs(u32 *frD)
diff --git a/arch/powerpc/math-emu/mtfsb0.c b/arch/powerpc/math-emu/mtfsb0.c
index d306235..bc98558 100644
--- a/arch/powerpc/math-emu/mtfsb0.c
+++ b/arch/powerpc/math-emu/mtfsb0.c
@@ -2,7 +2,8 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
 
 int
 mtfsb0(int crbD)
diff --git a/arch/powerpc/math-emu/mtfsb1.c b/arch/powerpc/math-emu/mtfsb1.c
index 2e94870..fe6ed5a 100644
--- a/arch/powerpc/math-emu/mtfsb1.c
+++ b/arch/powerpc/math-emu/mtfsb1.c
@@ -2,7 +2,8 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
 
 int
 mtfsb1(int crbD)
diff --git a/arch/powerpc/math-emu/mtfsf.c b/arch/powerpc/math-emu/mtfsf.c
index 48014d8..dbce92e 100644
--- a/arch/powerpc/math-emu/mtfsf.c
+++ b/arch/powerpc/math-emu/mtfsf.c
@@ -2,12 +2,14 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
 
 int
 mtfsf(unsigned int FM, u32 *frB)
 {
 	u32 mask;
+	u32 fpscr;
 
 	if (FM == 0)
 		return 0;
@@ -37,6 +39,22 @@ mtfsf(unsigned int FM, u32 *frB)
 	__FPU_FPSCR &= ~(mask);
 	__FPU_FPSCR |= (frB[1] & mask);
 
+	__FPU_FPSCR &= ~(FPSCR_VX);
+	if (__FPU_FPSCR & (FPSCR_VXSNAN | FPSCR_VXISI | FPSCR_VXIDI |
+		     FPSCR_VXZDZ | FPSCR_VXIMZ | FPSCR_VXVC |
+		     FPSCR_VXSOFT | FPSCR_VXSQRT | FPSCR_VXCVI))
+		__FPU_FPSCR |= FPSCR_VX;
+
+	fpscr = __FPU_FPSCR;
+	fpscr &= ~(FPSCR_FEX);
+	if (((fpscr & FPSCR_VX) && (fpscr & FPSCR_VE)) ||
+	    ((fpscr & FPSCR_OX) && (fpscr & FPSCR_OE)) ||
+	    ((fpscr & FPSCR_UX) && (fpscr & FPSCR_UE)) ||
+	    ((fpscr & FPSCR_ZX) && (fpscr & FPSCR_ZE)) ||
+	    ((fpscr & FPSCR_XX) && (fpscr & FPSCR_XE)))
+		fpscr |= FPSCR_FEX;
+	__FPU_FPSCR = fpscr;
+
 #ifdef DEBUG
 	printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR);
 #endif
diff --git a/arch/powerpc/math-emu/mtfsfi.c b/arch/powerpc/math-emu/mtfsfi.c
index 031e200..fd2acc2 100644
--- a/arch/powerpc/math-emu/mtfsfi.c
+++ b/arch/powerpc/math-emu/mtfsfi.c
@@ -2,7 +2,8 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
 
 int
 mtfsfi(unsigned int crfD, unsigned int IMM)
diff --git a/arch/powerpc/math-emu/op-1.h b/arch/powerpc/math-emu/op-1.h
deleted file mode 100644
index c92fa95..0000000
--- a/arch/powerpc/math-emu/op-1.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Basic one-word fraction declaration and manipulation.
- */
-
-#define _FP_FRAC_DECL_1(X)	_FP_W_TYPE X##_f
-#define _FP_FRAC_COPY_1(D,S)	(D##_f = S##_f)
-#define _FP_FRAC_SET_1(X,I)	(X##_f = I)
-#define _FP_FRAC_HIGH_1(X)	(X##_f)
-#define _FP_FRAC_LOW_1(X)	(X##_f)
-#define _FP_FRAC_WORD_1(X,w)	(X##_f)
-
-#define _FP_FRAC_ADDI_1(X,I)	(X##_f += I)
-#define _FP_FRAC_SLL_1(X,N)			\
-  do {						\
-    if (__builtin_constant_p(N) && (N) == 1)	\
-      X##_f += X##_f;				\
-    else					\
-      X##_f <<= (N);				\
-  } while (0)
-#define _FP_FRAC_SRL_1(X,N)	(X##_f >>= N)
-
-/* Right shift with sticky-lsb.  */
-#define _FP_FRAC_SRS_1(X,N,sz)	__FP_FRAC_SRS_1(X##_f, N, sz)
-
-#define __FP_FRAC_SRS_1(X,N,sz)						\
-   (X = (X >> (N) | (__builtin_constant_p(N) && (N) == 1		\
-		     ? X & 1 : (X << (_FP_W_TYPE_SIZE - (N))) != 0)))
-
-#define _FP_FRAC_ADD_1(R,X,Y)	(R##_f = X##_f + Y##_f)
-#define _FP_FRAC_SUB_1(R,X,Y)	(R##_f = X##_f - Y##_f)
-#define _FP_FRAC_CLZ_1(z, X)	__FP_CLZ(z, X##_f)
-
-/* Predicates */
-#define _FP_FRAC_NEGP_1(X)	((_FP_WS_TYPE)X##_f < 0)
-#define _FP_FRAC_ZEROP_1(X)	(X##_f == 0)
-#define _FP_FRAC_OVERP_1(fs,X)	(X##_f & _FP_OVERFLOW_##fs)
-#define _FP_FRAC_EQ_1(X, Y)	(X##_f == Y##_f)
-#define _FP_FRAC_GE_1(X, Y)	(X##_f >= Y##_f)
-#define _FP_FRAC_GT_1(X, Y)	(X##_f > Y##_f)
-
-#define _FP_ZEROFRAC_1		0
-#define _FP_MINFRAC_1		1
-
-/*
- * Unpack the raw bits of a native fp value.  Do not classify or
- * normalize the data.
- */
-
-#define _FP_UNPACK_RAW_1(fs, X, val)				\
-  do {								\
-    union _FP_UNION_##fs _flo; _flo.flt = (val);		\
-								\
-    X##_f = _flo.bits.frac;					\
-    X##_e = _flo.bits.exp;					\
-    X##_s = _flo.bits.sign;					\
-  } while (0)
-
-
-/*
- * Repack the raw bits of a native fp value.
- */
-
-#define _FP_PACK_RAW_1(fs, val, X)				\
-  do {								\
-    union _FP_UNION_##fs _flo;					\
-								\
-    _flo.bits.frac = X##_f;					\
-    _flo.bits.exp  = X##_e;					\
-    _flo.bits.sign = X##_s;					\
-								\
-    (val) = _flo.flt;						\
-  } while (0)
-
-
-/*
- * Multiplication algorithms:
- */
-
-/* Basic.  Assuming the host word size is >= 2*FRACBITS, we can do the
-   multiplication immediately.  */
-
-#define _FP_MUL_MEAT_1_imm(fs, R, X, Y)					\
-  do {									\
-    R##_f = X##_f * Y##_f;						\
-    /* Normalize since we know where the msb of the multiplicands	\
-       were (bit B), we know that the msb of the of the product is	\
-       at either 2B or 2B-1.  */					\
-    _FP_FRAC_SRS_1(R, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs);	\
-  } while (0)
-
-/* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
-
-#define _FP_MUL_MEAT_1_wide(fs, R, X, Y, doit)				\
-  do {									\
-    _FP_W_TYPE _Z_f0, _Z_f1;						\
-    doit(_Z_f1, _Z_f0, X##_f, Y##_f);					\
-    /* Normalize since we know where the msb of the multiplicands	\
-       were (bit B), we know that the msb of the of the product is	\
-       at either 2B or 2B-1.  */					\
-    _FP_FRAC_SRS_2(_Z, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs);	\
-    R##_f = _Z_f0;							\
-  } while (0)
-
-/* Finally, a simple widening multiply algorithm.  What fun!  */
-
-#define _FP_MUL_MEAT_1_hard(fs, R, X, Y)				\
-  do {									\
-    _FP_W_TYPE _xh, _xl, _yh, _yl, _z_f0, _z_f1, _a_f0, _a_f1;		\
-									\
-    /* split the words in half */					\
-    _xh = X##_f >> (_FP_W_TYPE_SIZE/2);					\
-    _xl = X##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1);		\
-    _yh = Y##_f >> (_FP_W_TYPE_SIZE/2);					\
-    _yl = Y##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1);		\
-									\
-    /* multiply the pieces */						\
-    _z_f0 = _xl * _yl;							\
-    _a_f0 = _xh * _yl;							\
-    _a_f1 = _xl * _yh;							\
-    _z_f1 = _xh * _yh;							\
-									\
-    /* reassemble into two full words */				\
-    if ((_a_f0 += _a_f1) < _a_f1)					\
-      _z_f1 += (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2);			\
-    _a_f1 = _a_f0 >> (_FP_W_TYPE_SIZE/2);				\
-    _a_f0 = _a_f0 << (_FP_W_TYPE_SIZE/2);				\
-    _FP_FRAC_ADD_2(_z, _z, _a);						\
-									\
-    /* normalize */							\
-    _FP_FRAC_SRS_2(_z, _FP_WFRACBITS_##fs - 1, 2*_FP_WFRACBITS_##fs);	\
-    R##_f = _z_f0;							\
-  } while (0)
-
-
-/*
- * Division algorithms:
- */
-
-/* Basic.  Assuming the host word size is >= 2*FRACBITS, we can do the
-   division immediately.  Give this macro either _FP_DIV_HELP_imm for
-   C primitives or _FP_DIV_HELP_ldiv for the ISO function.  Which you
-   choose will depend on what the compiler does with divrem4.  */
-
-#define _FP_DIV_MEAT_1_imm(fs, R, X, Y, doit)		\
-  do {							\
-    _FP_W_TYPE _q, _r;					\
-    X##_f <<= (X##_f < Y##_f				\
-	       ? R##_e--, _FP_WFRACBITS_##fs		\
-	       : _FP_WFRACBITS_##fs - 1);		\
-    doit(_q, _r, X##_f, Y##_f);				\
-    R##_f = _q | (_r != 0);				\
-  } while (0)
-
-/* GCC's longlong.h defines a 2W / 1W => (1W,1W) primitive udiv_qrnnd
-   that may be useful in this situation.  This first is for a primitive
-   that requires normalization, the second for one that does not.  Look
-   for UDIV_NEEDS_NORMALIZATION to tell which your machine needs.  */
-
-#define _FP_DIV_MEAT_1_udiv_norm(fs, R, X, Y)				\
-  do {									\
-    _FP_W_TYPE _nh, _nl, _q, _r;					\
-									\
-    /* Normalize Y -- i.e. make the most significant bit set.  */	\
-    Y##_f <<= _FP_WFRACXBITS_##fs - 1;					\
-									\
-    /* Shift X op correspondingly high, that is, up one full word.  */	\
-    if (X##_f <= Y##_f)							\
-      {									\
-	_nl = 0;							\
-	_nh = X##_f;							\
-      }									\
-    else								\
-      {									\
-	R##_e++;							\
-	_nl = X##_f << (_FP_W_TYPE_SIZE-1);				\
-	_nh = X##_f >> 1;						\
-      }									\
-    									\
-    udiv_qrnnd(_q, _r, _nh, _nl, Y##_f);				\
-    R##_f = _q | (_r != 0);						\
-  } while (0)
-
-#define _FP_DIV_MEAT_1_udiv(fs, R, X, Y)		\
-  do {							\
-    _FP_W_TYPE _nh, _nl, _q, _r;			\
-    if (X##_f < Y##_f)					\
-      {							\
-	R##_e--;					\
-	_nl = X##_f << _FP_WFRACBITS_##fs;		\
-	_nh = X##_f >> _FP_WFRACXBITS_##fs;		\
-      }							\
-    else						\
-      {							\
-	_nl = X##_f << (_FP_WFRACBITS_##fs - 1);	\
-	_nh = X##_f >> (_FP_WFRACXBITS_##fs + 1);	\
-      }							\
-    udiv_qrnnd(_q, _r, _nh, _nl, Y##_f);		\
-    R##_f = _q | (_r != 0);				\
-  } while (0)
-
-
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- */
-
-#define _FP_SQRT_MEAT_1(R, S, T, X, q)			\
-  do {							\
-    while (q)						\
-      {							\
-        T##_f = S##_f + q;				\
-        if (T##_f <= X##_f)				\
-          {						\
-            S##_f = T##_f + q;				\
-            X##_f -= T##_f;				\
-            R##_f += q;					\
-          }						\
-        _FP_FRAC_SLL_1(X, 1);				\
-        q >>= 1;					\
-      }							\
-  } while (0)
-
-/*
- * Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
-
-#define _FP_FRAC_ASSEMBLE_1(r, X, rsize)	(r = X##_f)
-#define _FP_FRAC_DISASSEMBLE_1(X, r, rsize)	(X##_f = r)
-
-
-/*
- * Convert FP values between word sizes
- */
-
-#define _FP_FRAC_CONV_1_1(dfs, sfs, D, S)				\
-  do {									\
-    D##_f = S##_f;							\
-    if (_FP_WFRACBITS_##sfs > _FP_WFRACBITS_##dfs)			\
-      _FP_FRAC_SRS_1(D, (_FP_WFRACBITS_##sfs-_FP_WFRACBITS_##dfs),	\
-		     _FP_WFRACBITS_##sfs);				\
-    else								\
-      D##_f <<= _FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs;		\
-  } while (0)
diff --git a/arch/powerpc/math-emu/op-2.h b/arch/powerpc/math-emu/op-2.h
deleted file mode 100644
index 7d6f17c..0000000
--- a/arch/powerpc/math-emu/op-2.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * Basic two-word fraction declaration and manipulation.
- */
-
-#define _FP_FRAC_DECL_2(X)	_FP_W_TYPE X##_f0, X##_f1
-#define _FP_FRAC_COPY_2(D,S)	(D##_f0 = S##_f0, D##_f1 = S##_f1)
-#define _FP_FRAC_SET_2(X,I)	__FP_FRAC_SET_2(X, I)
-#define _FP_FRAC_HIGH_2(X)	(X##_f1)
-#define _FP_FRAC_LOW_2(X)	(X##_f0)
-#define _FP_FRAC_WORD_2(X,w)	(X##_f##w)
-
-#define _FP_FRAC_SLL_2(X,N)						\
-  do {									\
-    if ((N) < _FP_W_TYPE_SIZE)						\
-      {									\
-        if (__builtin_constant_p(N) && (N) == 1) 			\
-          {								\
-            X##_f1 = X##_f1 + X##_f1 + (((_FP_WS_TYPE)(X##_f0)) < 0);	\
-            X##_f0 += X##_f0;						\
-          }								\
-        else								\
-          {								\
-	    X##_f1 = X##_f1 << (N) | X##_f0 >> (_FP_W_TYPE_SIZE - (N));	\
-	    X##_f0 <<= (N);						\
-	  }								\
-      }									\
-    else								\
-      {									\
-	X##_f1 = X##_f0 << ((N) - _FP_W_TYPE_SIZE);			\
-	X##_f0 = 0;							\
-      }									\
-  } while (0)
-
-#define _FP_FRAC_SRL_2(X,N)						\
-  do {									\
-    if ((N) < _FP_W_TYPE_SIZE)						\
-      {									\
-	X##_f0 = X##_f0 >> (N) | X##_f1 << (_FP_W_TYPE_SIZE - (N));	\
-	X##_f1 >>= (N);							\
-      }									\
-    else								\
-      {									\
-	X##_f0 = X##_f1 >> ((N) - _FP_W_TYPE_SIZE);			\
-	X##_f1 = 0;							\
-      }									\
-  } while (0)
-
-/* Right shift with sticky-lsb.  */
-#define _FP_FRAC_SRS_2(X,N,sz)						\
-  do {									\
-    if ((N) < _FP_W_TYPE_SIZE)						\
-      {									\
-	X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) |	\
-		  (__builtin_constant_p(N) && (N) == 1			\
-		   ? X##_f0 & 1						\
-		   : (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0));	\
-	X##_f1 >>= (N);							\
-      }									\
-    else								\
-      {									\
-	X##_f0 = (X##_f1 >> ((N) - _FP_W_TYPE_SIZE) |			\
-	          (((X##_f1 << (2 * _FP_W_TYPE_SIZE - (N))) |		\
-		   X##_f0) != 0));					\
-	X##_f1 = 0;							\
-      }									\
-  } while (0)
-
-#define _FP_FRAC_ADDI_2(X,I) \
-  __FP_FRAC_ADDI_2(X##_f1, X##_f0, I)
-
-#define _FP_FRAC_ADD_2(R,X,Y) \
-  __FP_FRAC_ADD_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0)
-
-#define _FP_FRAC_SUB_2(R,X,Y) \
-  __FP_FRAC_SUB_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0)
-
-#define _FP_FRAC_CLZ_2(R,X)	\
-  do {				\
-    if (X##_f1)			\
-      __FP_CLZ(R,X##_f1);	\
-    else 			\
-    {				\
-      __FP_CLZ(R,X##_f0);	\
-      R += _FP_W_TYPE_SIZE;	\
-    }				\
-  } while(0)
-
-/* Predicates */
-#define _FP_FRAC_NEGP_2(X)	((_FP_WS_TYPE)X##_f1 < 0)
-#define _FP_FRAC_ZEROP_2(X)	((X##_f1 | X##_f0) == 0)
-#define _FP_FRAC_OVERP_2(fs,X)	(X##_f1 & _FP_OVERFLOW_##fs)
-#define _FP_FRAC_EQ_2(X, Y)	(X##_f1 == Y##_f1 && X##_f0 == Y##_f0)
-#define _FP_FRAC_GT_2(X, Y)	\
-  ((X##_f1 > Y##_f1) || (X##_f1 == Y##_f1 && X##_f0 > Y##_f0))
-#define _FP_FRAC_GE_2(X, Y)	\
-  ((X##_f1 > Y##_f1) || (X##_f1 == Y##_f1 && X##_f0 >= Y##_f0))
-
-#define _FP_ZEROFRAC_2		0, 0
-#define _FP_MINFRAC_2		0, 1
-
-/*
- * Internals
- */
-
-#define __FP_FRAC_SET_2(X,I1,I0)	(X##_f0 = I0, X##_f1 = I1)
-
-#define __FP_CLZ_2(R, xh, xl)	\
-  do {				\
-    if (xh)			\
-      __FP_CLZ(R,xl);		\
-    else 			\
-    {				\
-      __FP_CLZ(R,xl);		\
-      R += _FP_W_TYPE_SIZE;	\
-    }				\
-  } while(0)
-
-#if 0
-
-#ifndef __FP_FRAC_ADDI_2
-#define __FP_FRAC_ADDI_2(xh, xl, i) \
-  (xh += ((xl += i) < i))
-#endif
-#ifndef __FP_FRAC_ADD_2
-#define __FP_FRAC_ADD_2(rh, rl, xh, xl, yh, yl) \
-  (rh = xh + yh + ((rl = xl + yl) < xl))
-#endif
-#ifndef __FP_FRAC_SUB_2
-#define __FP_FRAC_SUB_2(rh, rl, xh, xl, yh, yl) \
-  (rh = xh - yh - ((rl = xl - yl) > xl))
-#endif
-
-#else
-
-#undef __FP_FRAC_ADDI_2
-#define __FP_FRAC_ADDI_2(xh, xl, i)	add_ssaaaa(xh, xl, xh, xl, 0, i)
-#undef __FP_FRAC_ADD_2
-#define __FP_FRAC_ADD_2			add_ssaaaa
-#undef __FP_FRAC_SUB_2
-#define __FP_FRAC_SUB_2			sub_ddmmss
-
-#endif
-
-/*
- * Unpack the raw bits of a native fp value.  Do not classify or
- * normalize the data.
- */
-
-#define _FP_UNPACK_RAW_2(fs, X, val)			\
-  do {							\
-    union _FP_UNION_##fs _flo; _flo.flt = (val);	\
-							\
-    X##_f0 = _flo.bits.frac0;				\
-    X##_f1 = _flo.bits.frac1;				\
-    X##_e  = _flo.bits.exp;				\
-    X##_s  = _flo.bits.sign;				\
-  } while (0)
-
-
-/*
- * Repack the raw bits of a native fp value.
- */
-
-#define _FP_PACK_RAW_2(fs, val, X)			\
-  do {							\
-    union _FP_UNION_##fs _flo;				\
-							\
-    _flo.bits.frac0 = X##_f0;				\
-    _flo.bits.frac1 = X##_f1;				\
-    _flo.bits.exp   = X##_e;				\
-    _flo.bits.sign  = X##_s;				\
-							\
-    (val) = _flo.flt;					\
-  } while (0)
-
-
-/*
- * Multiplication algorithms:
- */
-
-/* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
-
-#define _FP_MUL_MEAT_2_wide(fs, R, X, Y, doit)				\
-  do {									\
-    _FP_FRAC_DECL_4(_z); _FP_FRAC_DECL_2(_b); _FP_FRAC_DECL_2(_c);	\
-									\
-    doit(_FP_FRAC_WORD_4(_z,1), _FP_FRAC_WORD_4(_z,0), X##_f0, Y##_f0); \
-    doit(_b_f1, _b_f0, X##_f0, Y##_f1);					\
-    doit(_c_f1, _c_f0, X##_f1, Y##_f0);					\
-    doit(_FP_FRAC_WORD_4(_z,3), _FP_FRAC_WORD_4(_z,2), X##_f1, Y##_f1); \
-									\
-    __FP_FRAC_ADD_4(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
-		    _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0),	\
-		    0, _b_f1, _b_f0, 0,					\
-		    _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
-		    _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0));	\
-    __FP_FRAC_ADD_4(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
-		    _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0),	\
-		    0, _c_f1, _c_f0, 0,					\
-		    _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
-		    _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0));	\
-									\
-    /* Normalize since we know where the msb of the multiplicands	\
-       were (bit B), we know that the msb of the of the product is	\
-       at either 2B or 2B-1.  */					\
-    _FP_FRAC_SRS_4(_z, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs);	\
-    R##_f0 = _FP_FRAC_WORD_4(_z,0);					\
-    R##_f1 = _FP_FRAC_WORD_4(_z,1);					\
-  } while (0)
-
-/* This next macro appears to be totally broken. Fortunately nowhere
- * seems to use it :-> The problem is that we define _z[4] but
- * then use it in _FP_FRAC_SRS_4, which will attempt to access
- * _z_f[n] which will cause an error. The fix probably involves
- * declaring it with _FP_FRAC_DECL_4, see previous macro. -- PMM 02/1998
- */
-#define _FP_MUL_MEAT_2_gmp(fs, R, X, Y)					\
-  do {									\
-    _FP_W_TYPE _x[2], _y[2], _z[4];					\
-    _x[0] = X##_f0; _x[1] = X##_f1;					\
-    _y[0] = Y##_f0; _y[1] = Y##_f1;					\
-									\
-    mpn_mul_n(_z, _x, _y, 2);						\
-									\
-    /* Normalize since we know where the msb of the multiplicands	\
-       were (bit B), we know that the msb of the of the product is	\
-       at either 2B or 2B-1.  */					\
-    _FP_FRAC_SRS_4(_z, _FP_WFRACBITS##_fs-1, 2*_FP_WFRACBITS_##fs);	\
-    R##_f0 = _z[0];							\
-    R##_f1 = _z[1];							\
-  } while (0)
-
-
-/*
- * Division algorithms:
- * This seems to be giving me difficulties -- PMM
- * Look, NetBSD seems to be able to comment algorithms. Can't you?
- * I've thrown printks at the problem.
- * This now appears to work, but I still don't really know why.
- * Also, I don't think the result is properly normalised...
- */
-
-#define _FP_DIV_MEAT_2_udiv_64(fs, R, X, Y)				\
-  do {									\
-    extern void _fp_udivmodti4(_FP_W_TYPE q[2], _FP_W_TYPE r[2],	\
-			       _FP_W_TYPE n1, _FP_W_TYPE n0,		\
-			       _FP_W_TYPE d1, _FP_W_TYPE d0);		\
-    _FP_W_TYPE _n_f3, _n_f2, _n_f1, _n_f0, _r_f1, _r_f0;		\
-    _FP_W_TYPE _q_f1, _q_f0, _m_f1, _m_f0;				\
-    _FP_W_TYPE _rmem[2], _qmem[2];					\
-    /* I think this check is to ensure that the result is normalised.   \
-     * Assuming X,Y normalised (ie in [1.0,2.0)) X/Y will be in         \
-     * [0.5,2.0). Furthermore, it will be less than 1.0 iff X < Y.      \
-     * In this case we tweak things. (this is based on comments in      \
-     * the NetBSD FPU emulation code. )                                 \
-     * We know X,Y are normalised because we ensure this as part of     \
-     * the unpacking process. -- PMM                                    \
-     */									\
-    if (_FP_FRAC_GT_2(X, Y))						\
-      {									\
-/*	R##_e++; */							\
-	_n_f3 = X##_f1 >> 1;						\
-	_n_f2 = X##_f1 << (_FP_W_TYPE_SIZE - 1) | X##_f0 >> 1;		\
-	_n_f1 = X##_f0 << (_FP_W_TYPE_SIZE - 1);			\
-	_n_f0 = 0;							\
-      }									\
-    else								\
-      {									\
-	R##_e--;							\
-	_n_f3 = X##_f1;							\
-	_n_f2 = X##_f0;							\
-	_n_f1 = _n_f0 = 0;						\
-      }									\
-									\
-    /* Normalize, i.e. make the most significant bit of the 		\
-       denominator set.  CHANGED: - 1 to nothing -- PMM */		\
-    _FP_FRAC_SLL_2(Y, _FP_WFRACXBITS_##fs /* -1 */);			\
-									\
-    /* Do the 256/128 bit division given the 128-bit _fp_udivmodtf4 	\
-       primitive snagged from libgcc2.c.  */				\
-									\
-    _fp_udivmodti4(_qmem, _rmem, _n_f3, _n_f2, 0, Y##_f1);		\
-    _q_f1 = _qmem[0];							\
-    umul_ppmm(_m_f1, _m_f0, _q_f1, Y##_f0);				\
-    _r_f1 = _rmem[0];							\
-    _r_f0 = _n_f1;							\
-    if (_FP_FRAC_GT_2(_m, _r))						\
-      {									\
-	_q_f1--;							\
-	_FP_FRAC_ADD_2(_r, _r, Y);					\
-	if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r))		\
-	  {								\
-	    _q_f1--;							\
-	    _FP_FRAC_ADD_2(_r, _r, Y);					\
-	  }								\
-      }									\
-    _FP_FRAC_SUB_2(_r, _r, _m);						\
-									\
-    _fp_udivmodti4(_qmem, _rmem, _r_f1, _r_f0, 0, Y##_f1);		\
-    _q_f0 = _qmem[0];							\
-    umul_ppmm(_m_f1, _m_f0, _q_f0, Y##_f0);				\
-    _r_f1 = _rmem[0];							\
-    _r_f0 = _n_f0;							\
-    if (_FP_FRAC_GT_2(_m, _r))						\
-      {									\
-	_q_f0--;							\
-	_FP_FRAC_ADD_2(_r, _r, Y);					\
-	if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r))		\
-	  {								\
-	    _q_f0--;							\
-	    _FP_FRAC_ADD_2(_r, _r, Y);					\
-	  }								\
-      }									\
-    _FP_FRAC_SUB_2(_r, _r, _m);						\
-									\
-    R##_f1 = _q_f1;							\
-    R##_f0 = _q_f0 | ((_r_f1 | _r_f0) != 0);				\
-    /* adjust so answer is normalized again. I'm not sure what the 	\
-     * final sz param should be. In practice it's never used since      \
-     * N is 1 which is always going to be < _FP_W_TYPE_SIZE...		\
-     */									\
-    /* _FP_FRAC_SRS_2(R,1,_FP_WFRACBITS_##fs);	*/			\
-  } while (0)
-
-
-#define _FP_DIV_MEAT_2_gmp(fs, R, X, Y)					\
-  do {									\
-    _FP_W_TYPE _x[4], _y[2], _z[4];					\
-    _y[0] = Y##_f0; _y[1] = Y##_f1;					\
-    _x[0] = _x[3] = 0;							\
-    if (_FP_FRAC_GT_2(X, Y))						\
-      {									\
-	R##_e++;							\
-	_x[1] = (X##_f0 << (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE) |	\
-		 X##_f1 >> (_FP_W_TYPE_SIZE -				\
-			    (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE)));	\
-	_x[2] = X##_f1 << (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE);		\
-      }									\
-    else								\
-      {									\
-	_x[1] = (X##_f0 << (_FP_WFRACBITS - _FP_W_TYPE_SIZE) |		\
-		 X##_f1 >> (_FP_W_TYPE_SIZE -				\
-			    (_FP_WFRACBITS - _FP_W_TYPE_SIZE)));	\
-	_x[2] = X##_f1 << (_FP_WFRACBITS - _FP_W_TYPE_SIZE);		\
-      }									\
-									\
-    (void) mpn_divrem (_z, 0, _x, 4, _y, 2);				\
-    R##_f1 = _z[1];							\
-    R##_f0 = _z[0] | ((_x[0] | _x[1]) != 0);				\
-  } while (0)
-
-
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- */
-
-#define _FP_SQRT_MEAT_2(R, S, T, X, q)			\
-  do {							\
-    while (q)						\
-      {							\
-        T##_f1 = S##_f1 + q;				\
-        if (T##_f1 <= X##_f1)				\
-          {						\
-            S##_f1 = T##_f1 + q;			\
-            X##_f1 -= T##_f1;				\
-            R##_f1 += q;				\
-          }						\
-        _FP_FRAC_SLL_2(X, 1);				\
-        q >>= 1;					\
-      }							\
-    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);		\
-    while (q)						\
-      {							\
-        T##_f0 = S##_f0 + q;				\
-        T##_f1 = S##_f1;				\
-        if (T##_f1 < X##_f1 || 				\
-            (T##_f1 == X##_f1 && T##_f0 < X##_f0))	\
-          {						\
-            S##_f0 = T##_f0 + q;			\
-            if (((_FP_WS_TYPE)T##_f0) < 0 &&		\
-                ((_FP_WS_TYPE)S##_f0) >= 0)		\
-              S##_f1++;					\
-            _FP_FRAC_SUB_2(X, X, T);			\
-            R##_f0 += q;				\
-          }						\
-        _FP_FRAC_SLL_2(X, 1);				\
-        q >>= 1;					\
-      }							\
-  } while (0)
-
-
-/*
- * Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
-
-#define _FP_FRAC_ASSEMBLE_2(r, X, rsize)	\
-  do {						\
-    if (rsize <= _FP_W_TYPE_SIZE)		\
-      r = X##_f0;				\
-    else					\
-      {						\
-	r = X##_f1;				\
-	r <<= _FP_W_TYPE_SIZE;			\
-	r += X##_f0;				\
-      }						\
-  } while (0)
-
-#define _FP_FRAC_DISASSEMBLE_2(X, r, rsize)				\
-  do {									\
-    X##_f0 = r;								\
-    X##_f1 = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE);	\
-  } while (0)
-
-/*
- * Convert FP values between word sizes
- */
-
-#define _FP_FRAC_CONV_1_2(dfs, sfs, D, S)				\
-  do {									\
-    _FP_FRAC_SRS_2(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),	\
-		   _FP_WFRACBITS_##sfs);				\
-    D##_f = S##_f0;							\
-  } while (0)
-
-#define _FP_FRAC_CONV_2_1(dfs, sfs, D, S)				\
-  do {									\
-    D##_f0 = S##_f;							\
-    D##_f1 = 0;								\
-    _FP_FRAC_SLL_2(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));	\
-  } while (0)
-
diff --git a/arch/powerpc/math-emu/op-4.h b/arch/powerpc/math-emu/op-4.h
deleted file mode 100644
index c9ae626..0000000
--- a/arch/powerpc/math-emu/op-4.h
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Basic four-word fraction declaration and manipulation.
- *
- * When adding quadword support for 32 bit machines, we need
- * to be a little careful as double multiply uses some of these
- * macros: (in op-2.h)
- * _FP_MUL_MEAT_2_wide() uses _FP_FRAC_DECL_4, _FP_FRAC_WORD_4,
- * _FP_FRAC_ADD_4, _FP_FRAC_SRS_4
- * _FP_MUL_MEAT_2_gmp() uses _FP_FRAC_SRS_4 (and should use
- * _FP_FRAC_DECL_4: it appears to be broken and is not used
- * anywhere anyway. )
- *
- * I've now fixed all the macros that were here from the sparc64 code.
- * [*none* of the shift macros were correct!] -- PMM 02/1998
- *
- * The only quadword stuff that remains to be coded is:
- * 1) the conversion to/from ints, which requires
- * that we check (in op-common.h) that the following do the right thing
- * for quadwords: _FP_TO_INT(Q,4,r,X,rsz,rsg), _FP_FROM_INT(Q,4,X,r,rs,rt)
- * 2) multiply, divide and sqrt, which require:
- * _FP_MUL_MEAT_4_*(R,X,Y), _FP_DIV_MEAT_4_*(R,X,Y), _FP_SQRT_MEAT_4(R,S,T,X,q),
- * This also needs _FP_MUL_MEAT_Q and _FP_DIV_MEAT_Q to be defined to
- * some suitable _FP_MUL_MEAT_4_* macros in sfp-machine.h.
- * [we're free to choose whatever FP_MUL_MEAT_4_* macros we need for
- * these; they are used nowhere else. ]
- */
-
-#define _FP_FRAC_DECL_4(X)	_FP_W_TYPE X##_f[4]
-#define _FP_FRAC_COPY_4(D,S)			\
-  (D##_f[0] = S##_f[0], D##_f[1] = S##_f[1],	\
-   D##_f[2] = S##_f[2], D##_f[3] = S##_f[3])
-/* The _FP_FRAC_SET_n(X,I) macro is intended for use with another
- * macro such as _FP_ZEROFRAC_n which returns n comma separated values.
- * The result is that we get an expansion of __FP_FRAC_SET_n(X,I0,I1,I2,I3)
- * which just assigns the In values to the array X##_f[].
- * This is why the number of parameters doesn't appear to match
- * at first glance...      -- PMM
- */
-#define _FP_FRAC_SET_4(X,I)	__FP_FRAC_SET_4(X, I)
-#define _FP_FRAC_HIGH_4(X)	(X##_f[3])
-#define _FP_FRAC_LOW_4(X)	(X##_f[0])
-#define _FP_FRAC_WORD_4(X,w)	(X##_f[w])
-
-#define _FP_FRAC_SLL_4(X,N)						\
-  do {									\
-    _FP_I_TYPE _up, _down, _skip, _i;					\
-    _skip = (N) / _FP_W_TYPE_SIZE;					\
-    _up = (N) % _FP_W_TYPE_SIZE;					\
-    _down = _FP_W_TYPE_SIZE - _up;					\
-    for (_i = 3; _i > _skip; --_i)					\
-      X##_f[_i] = X##_f[_i-_skip] << _up | X##_f[_i-_skip-1] >> _down;	\
-/* bugfixed: was X##_f[_i] <<= _up;  -- PMM 02/1998 */                  \
-    X##_f[_i] = X##_f[0] << _up; 	                                \
-    for (--_i; _i >= 0; --_i)						\
-      X##_f[_i] = 0;							\
-  } while (0)
-
-/* This one was broken too */
-#define _FP_FRAC_SRL_4(X,N)						\
-  do {									\
-    _FP_I_TYPE _up, _down, _skip, _i;					\
-    _skip = (N) / _FP_W_TYPE_SIZE;					\
-    _down = (N) % _FP_W_TYPE_SIZE;					\
-    _up = _FP_W_TYPE_SIZE - _down;					\
-    for (_i = 0; _i < 3-_skip; ++_i)					\
-      X##_f[_i] = X##_f[_i+_skip] >> _down | X##_f[_i+_skip+1] << _up;	\
-    X##_f[_i] = X##_f[3] >> _down;			         	\
-    for (++_i; _i < 4; ++_i)						\
-      X##_f[_i] = 0;							\
-  } while (0)
-
-
-/* Right shift with sticky-lsb.
- * What this actually means is that we do a standard right-shift,
- * but that if any of the bits that fall off the right hand side
- * were one then we always set the LSbit.
- */
-#define _FP_FRAC_SRS_4(X,N,size)					\
-  do {									\
-    _FP_I_TYPE _up, _down, _skip, _i;					\
-    _FP_W_TYPE _s;							\
-    _skip = (N) / _FP_W_TYPE_SIZE;					\
-    _down = (N) % _FP_W_TYPE_SIZE;					\
-    _up = _FP_W_TYPE_SIZE - _down;					\
-    for (_s = _i = 0; _i < _skip; ++_i)					\
-      _s |= X##_f[_i];							\
-    _s |= X##_f[_i] << _up;						\
-/* s is now != 0 if we want to set the LSbit */                         \
-    for (_i = 0; _i < 3-_skip; ++_i)					\
-      X##_f[_i] = X##_f[_i+_skip] >> _down | X##_f[_i+_skip+1] << _up;	\
-    X##_f[_i] = X##_f[3] >> _down;					\
-    for (++_i; _i < 4; ++_i)						\
-      X##_f[_i] = 0;							\
-    /* don't fix the LSB until the very end when we're sure f[0] is stable */ \
-    X##_f[0] |= (_s != 0);                                              \
-  } while (0)
-
-#define _FP_FRAC_ADD_4(R,X,Y)						\
-  __FP_FRAC_ADD_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0],		\
-		  X##_f[3], X##_f[2], X##_f[1], X##_f[0],		\
-		  Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
-
-#define _FP_FRAC_SUB_4(R,X,Y)                                           \
-  __FP_FRAC_SUB_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0],		\
-		  X##_f[3], X##_f[2], X##_f[1], X##_f[0],		\
-		  Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
-
-#define _FP_FRAC_ADDI_4(X,I)                                            \
-  __FP_FRAC_ADDI_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0], I)
-
-#define _FP_ZEROFRAC_4  0,0,0,0
-#define _FP_MINFRAC_4   0,0,0,1
-
-#define _FP_FRAC_ZEROP_4(X)     ((X##_f[0] | X##_f[1] | X##_f[2] | X##_f[3]) == 0)
-#define _FP_FRAC_NEGP_4(X)      ((_FP_WS_TYPE)X##_f[3] < 0)
-#define _FP_FRAC_OVERP_4(fs,X)  (X##_f[0] & _FP_OVERFLOW_##fs)
-
-#define _FP_FRAC_EQ_4(X,Y)                              \
- (X##_f[0] == Y##_f[0] && X##_f[1] == Y##_f[1]          \
-  && X##_f[2] == Y##_f[2] && X##_f[3] == Y##_f[3])
-
-#define _FP_FRAC_GT_4(X,Y)                              \
- (X##_f[3] > Y##_f[3] ||                                \
-  (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] ||      \
-   (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] ||     \
-    (X##_f[1] == Y##_f[1] && X##_f[0] > Y##_f[0])       \
-   ))                                                   \
-  ))                                                    \
- )
-
-#define _FP_FRAC_GE_4(X,Y)                              \
- (X##_f[3] > Y##_f[3] ||                                \
-  (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] ||      \
-   (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] ||     \
-    (X##_f[1] == Y##_f[1] && X##_f[0] >= Y##_f[0])      \
-   ))                                                   \
-  ))                                                    \
- )
-
-
-#define _FP_FRAC_CLZ_4(R,X)             \
-  do {                                  \
-    if (X##_f[3])                       \
-    {                                   \
-        __FP_CLZ(R,X##_f[3]);           \
-    }                                   \
-    else if (X##_f[2])                  \
-    {                                   \
-        __FP_CLZ(R,X##_f[2]);           \
-        R += _FP_W_TYPE_SIZE;           \
-    }                                   \
-    else if (X##_f[1])                  \
-    {                                   \
-        __FP_CLZ(R,X##_f[2]);           \
-        R += _FP_W_TYPE_SIZE*2;         \
-    }                                   \
-    else                                \
-    {                                   \
-        __FP_CLZ(R,X##_f[0]);           \
-        R += _FP_W_TYPE_SIZE*3;         \
-    }                                   \
-  } while(0)
-
-
-#define _FP_UNPACK_RAW_4(fs, X, val)                            \
-  do {                                                          \
-    union _FP_UNION_##fs _flo; _flo.flt = (val);        	\
-    X##_f[0] = _flo.bits.frac0;                                 \
-    X##_f[1] = _flo.bits.frac1;                                 \
-    X##_f[2] = _flo.bits.frac2;                                 \
-    X##_f[3] = _flo.bits.frac3;                                 \
-    X##_e  = _flo.bits.exp;                                     \
-    X##_s  = _flo.bits.sign;                                    \
-  } while (0)
-
-#define _FP_PACK_RAW_4(fs, val, X)                              \
-  do {                                                          \
-    union _FP_UNION_##fs _flo;					\
-    _flo.bits.frac0 = X##_f[0];                                 \
-    _flo.bits.frac1 = X##_f[1];                                 \
-    _flo.bits.frac2 = X##_f[2];                                 \
-    _flo.bits.frac3 = X##_f[3];                                 \
-    _flo.bits.exp   = X##_e;                                    \
-    _flo.bits.sign  = X##_s;                                    \
-    (val) = _flo.flt;                                   	\
-  } while (0)
-
-
-/*
- * Internals
- */
-
-#define __FP_FRAC_SET_4(X,I3,I2,I1,I0)					\
-  (X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0)
-
-#ifndef __FP_FRAC_ADD_4
-#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)	\
-  do {								\
-    int _c1, _c2, _c3;						\
-    r0 = x0 + y0;						\
-    _c1 = r0 < x0;						\
-    r1 = x1 + y1;						\
-    _c2 = r1 < x1;						\
-    r1 += _c1;							\
-    _c2 |= r1 < _c1;						\
-    r2 = x2 + y2;						\
-    _c3 = r2 < x2;						\
-    r2 += _c2;							\
-    _c3 |= r2 < _c2;						\
-    r3 = x3 + y3 + _c3;						\
-  } while (0)
-#endif
-
-#ifndef __FP_FRAC_SUB_4
-#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)	\
-  do {								\
-    int _c1, _c2, _c3;						\
-    r0 = x0 - y0;						\
-    _c1 = r0 > x0;						\
-    r1 = x1 - y1;						\
-    _c2 = r1 > x1;						\
-    r1 -= _c1;							\
-    _c2 |= r1 > _c1;						\
-    r2 = x2 - y2;						\
-    _c3 = r2 > x2;						\
-    r2 -= _c2;							\
-    _c3 |= r2 > _c2;						\
-    r3 = x3 - y3 - _c3;						\
-  } while (0)
-#endif
-
-#ifndef __FP_FRAC_ADDI_4
-/* I always wanted to be a lisp programmer :-> */
-#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i)                                 \
-  (x3 += ((x2 += ((x1 += ((x0 += i) < x0)) < x1) < x2)))
-#endif
-
-/* Convert FP values between word sizes. This appears to be more
- * complicated than I'd have expected it to be, so these might be
- * wrong... These macros are in any case somewhat bogus because they
- * use information about what various FRAC_n variables look like
- * internally [eg, that 2 word vars are X_f0 and x_f1]. But so do
- * the ones in op-2.h and op-1.h.
- */
-#define _FP_FRAC_CONV_1_4(dfs, sfs, D, S)                               \
-   do {                                                                 \
-     _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),     \
-                        _FP_WFRACBITS_##sfs);                           \
-     D##_f = S##_f[0];                                                   \
-  } while (0)
-
-#define _FP_FRAC_CONV_2_4(dfs, sfs, D, S)                               \
-   do {                                                                 \
-     _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),     \
-                        _FP_WFRACBITS_##sfs);                           \
-     D##_f0 = S##_f[0];                                                  \
-     D##_f1 = S##_f[1];                                                  \
-  } while (0)
-
-/* Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
-/* Put the FP value X into r, which is an integer of size rsize. */
-#define _FP_FRAC_ASSEMBLE_4(r, X, rsize)                                \
-  do {                                                                  \
-    if (rsize <= _FP_W_TYPE_SIZE)                                       \
-      r = X##_f[0];                                                     \
-    else if (rsize <= 2*_FP_W_TYPE_SIZE)                                \
-    {                                                                   \
-      r = X##_f[1];                                                     \
-      r <<= _FP_W_TYPE_SIZE;                                            \
-      r += X##_f[0];                                                    \
-    }                                                                   \
-    else                                                                \
-    {                                                                   \
-      /* I'm feeling lazy so we deal with int == 3words (implausible)*/ \
-      /* and int == 4words as a single case.                         */ \
-      r = X##_f[3];                                                     \
-      r <<= _FP_W_TYPE_SIZE;                                            \
-      r += X##_f[2];                                                    \
-      r <<= _FP_W_TYPE_SIZE;                                            \
-      r += X##_f[1];                                                    \
-      r <<= _FP_W_TYPE_SIZE;                                            \
-      r += X##_f[0];                                                    \
-    }                                                                   \
-  } while (0)
-
-/* "No disassemble Number Five!" */
-/* move an integer of size rsize into X's fractional part. We rely on
- * the _f[] array consisting of words of size _FP_W_TYPE_SIZE to avoid
- * having to mask the values we store into it.
- */
-#define _FP_FRAC_DISASSEMBLE_4(X, r, rsize)                             \
-  do {                                                                  \
-    X##_f[0] = r;                                                       \
-    X##_f[1] = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE);   \
-    X##_f[2] = (rsize <= 2*_FP_W_TYPE_SIZE ? 0 : r >> 2*_FP_W_TYPE_SIZE); \
-    X##_f[3] = (rsize <= 3*_FP_W_TYPE_SIZE ? 0 : r >> 3*_FP_W_TYPE_SIZE); \
-  } while (0)
-
-#define _FP_FRAC_CONV_4_1(dfs, sfs, D, S)                               \
-   do {                                                                 \
-     D##_f[0] = S##_f;                                                  \
-     D##_f[1] = D##_f[2] = D##_f[3] = 0;                                \
-     _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));    \
-   } while (0)
-
-#define _FP_FRAC_CONV_4_2(dfs, sfs, D, S)                               \
-   do {                                                                 \
-     D##_f[0] = S##_f0;                                                 \
-     D##_f[1] = S##_f1;                                                 \
-     D##_f[2] = D##_f[3] = 0;                                           \
-     _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));    \
-   } while (0)
-
-/* FIXME! This has to be written */
-#define _FP_SQRT_MEAT_4(R, S, T, X, q)
diff --git a/arch/powerpc/math-emu/op-common.h b/arch/powerpc/math-emu/op-common.h
deleted file mode 100644
index afb82b6..0000000
--- a/arch/powerpc/math-emu/op-common.h
+++ /dev/null
@@ -1,688 +0,0 @@
-#define _FP_DECL(wc, X)			\
-  _FP_I_TYPE X##_c, X##_s, X##_e;	\
-  _FP_FRAC_DECL_##wc(X)
-
-/*
- * Finish truely unpacking a native fp value by classifying the kind
- * of fp value and normalizing both the exponent and the fraction.
- */
-
-#define _FP_UNPACK_CANONICAL(fs, wc, X)					\
-do {									\
-  switch (X##_e)							\
-  {									\
-  default:								\
-    _FP_FRAC_HIGH_##wc(X) |= _FP_IMPLBIT_##fs;				\
-    _FP_FRAC_SLL_##wc(X, _FP_WORKBITS);					\
-    X##_e -= _FP_EXPBIAS_##fs;						\
-    X##_c = FP_CLS_NORMAL;						\
-    break;								\
-									\
-  case 0:								\
-    if (_FP_FRAC_ZEROP_##wc(X))						\
-      X##_c = FP_CLS_ZERO;						\
-    else								\
-      {									\
-	/* a denormalized number */					\
-	_FP_I_TYPE _shift;						\
-	_FP_FRAC_CLZ_##wc(_shift, X);					\
-	_shift -= _FP_FRACXBITS_##fs;					\
-	_FP_FRAC_SLL_##wc(X, (_shift+_FP_WORKBITS));			\
-	X##_e -= _FP_EXPBIAS_##fs - 1 + _shift;				\
-	X##_c = FP_CLS_NORMAL;						\
-      }									\
-    break;								\
-									\
-  case _FP_EXPMAX_##fs:							\
-    if (_FP_FRAC_ZEROP_##wc(X))						\
-      X##_c = FP_CLS_INF;						\
-    else								\
-      /* we don't differentiate between signaling and quiet nans */	\
-      X##_c = FP_CLS_NAN;						\
-    break;								\
-  }									\
-} while (0)
-
-
-/*
- * Before packing the bits back into the native fp result, take care
- * of such mundane things as rounding and overflow.  Also, for some
- * kinds of fp values, the original parts may not have been fully
- * extracted -- but that is ok, we can regenerate them now.
- */
-
-#define _FP_PACK_CANONICAL(fs, wc, X)				\
-({int __ret = 0;						\
-  switch (X##_c)						\
-  {								\
-  case FP_CLS_NORMAL:						\
-    X##_e += _FP_EXPBIAS_##fs;					\
-    if (X##_e > 0)						\
-      {								\
-	__ret |= _FP_ROUND(wc, X);				\
-	if (_FP_FRAC_OVERP_##wc(fs, X))				\
-	  {							\
-	    _FP_FRAC_SRL_##wc(X, (_FP_WORKBITS+1));		\
-	    X##_e++;						\
-	  }							\
-	else							\
-	  _FP_FRAC_SRL_##wc(X, _FP_WORKBITS);			\
-	if (X##_e >= _FP_EXPMAX_##fs)				\
-	  {							\
-	    /* overflow to infinity */				\
-	    X##_e = _FP_EXPMAX_##fs;				\
-	    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);		\
-            __ret |= EFLAG_OVERFLOW;				\
-	  }							\
-      }								\
-    else							\
-      {								\
-	/* we've got a denormalized number */			\
-	X##_e = -X##_e + 1;					\
-	if (X##_e <= _FP_WFRACBITS_##fs)			\
-	  {							\
-	    _FP_FRAC_SRS_##wc(X, X##_e, _FP_WFRACBITS_##fs);	\
-	    _FP_FRAC_SLL_##wc(X, 1);				\
-	    if (_FP_FRAC_OVERP_##wc(fs, X))			\
-	      {							\
-	        X##_e = 1;					\
-	        _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);	\
-	      }							\
-	    else						\
-	      {							\
-		X##_e = 0;					\
-		_FP_FRAC_SRL_##wc(X, _FP_WORKBITS+1);		\
-                __ret |= EFLAG_UNDERFLOW;			\
-	      }							\
-	  }							\
-	else							\
-	  {							\
-	    /* underflow to zero */				\
-	    X##_e = 0;						\
-	    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);		\
-            __ret |= EFLAG_UNDERFLOW;				\
-	  }							\
-      }								\
-    break;							\
-								\
-  case FP_CLS_ZERO:						\
-    X##_e = 0;							\
-    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
-    break;							\
-								\
-  case FP_CLS_INF:						\
-    X##_e = _FP_EXPMAX_##fs;					\
-    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
-    break;							\
-								\
-  case FP_CLS_NAN:						\
-    X##_e = _FP_EXPMAX_##fs;					\
-    if (!_FP_KEEPNANFRACP)					\
-      {								\
-	_FP_FRAC_SET_##wc(X, _FP_NANFRAC_##fs);			\
-	X##_s = 0;						\
-      }								\
-    else							\
-      _FP_FRAC_HIGH_##wc(X) |= _FP_QNANBIT_##fs;		\
-    break;							\
-  }								\
-  __ret;							\
-})
-
-
-/*
- * Main addition routine.  The input values should be cooked.
- */
-
-#define _FP_ADD(fs, wc, R, X, Y)					     \
-do {									     \
-  switch (_FP_CLS_COMBINE(X##_c, Y##_c))				     \
-  {									     \
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):			     \
-    {									     \
-      /* shift the smaller number so that its exponent matches the larger */ \
-      _FP_I_TYPE diff = X##_e - Y##_e;					     \
-									     \
-      if (diff < 0)							     \
-	{								     \
-	  diff = -diff;							     \
-	  if (diff <= _FP_WFRACBITS_##fs)				     \
-	    _FP_FRAC_SRS_##wc(X, diff, _FP_WFRACBITS_##fs);		     \
-	  else if (!_FP_FRAC_ZEROP_##wc(X))				     \
-	    _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc);			     \
-	  else								     \
-	    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			     \
-	  R##_e = Y##_e;						     \
-	}								     \
-      else								     \
-	{								     \
-	  if (diff > 0)							     \
-	    {								     \
-	      if (diff <= _FP_WFRACBITS_##fs)				     \
-	        _FP_FRAC_SRS_##wc(Y, diff, _FP_WFRACBITS_##fs);		     \
-	      else if (!_FP_FRAC_ZEROP_##wc(Y))				     \
-	        _FP_FRAC_SET_##wc(Y, _FP_MINFRAC_##wc);			     \
-	      else							     \
-	        _FP_FRAC_SET_##wc(Y, _FP_ZEROFRAC_##wc);		     \
-	    }								     \
-	  R##_e = X##_e;						     \
-	}								     \
-									     \
-      R##_c = FP_CLS_NORMAL;						     \
-									     \
-      if (X##_s == Y##_s)						     \
-	{								     \
-	  R##_s = X##_s;						     \
-	  _FP_FRAC_ADD_##wc(R, X, Y);					     \
-	  if (_FP_FRAC_OVERP_##wc(fs, R))				     \
-	    {								     \
-	      _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs);		     \
-	      R##_e++;							     \
-	    }								     \
-	}								     \
-      else								     \
-	{								     \
-	  R##_s = X##_s;						     \
-	  _FP_FRAC_SUB_##wc(R, X, Y);					     \
-	  if (_FP_FRAC_ZEROP_##wc(R))					     \
-	    {								     \
-	      /* return an exact zero */				     \
-	      if (FP_ROUNDMODE == FP_RND_MINF)				     \
-		R##_s |= Y##_s;						     \
-	      else							     \
-		R##_s &= Y##_s;						     \
-	      R##_c = FP_CLS_ZERO;					     \
-	    }								     \
-	  else								     \
-	    {								     \
-	      if (_FP_FRAC_NEGP_##wc(R))				     \
-		{							     \
-		  _FP_FRAC_SUB_##wc(R, Y, X);				     \
-		  R##_s = Y##_s;					     \
-		}							     \
-									     \
-	      /* renormalize after subtraction */			     \
-	      _FP_FRAC_CLZ_##wc(diff, R);				     \
-	      diff -= _FP_WFRACXBITS_##fs;				     \
-	      if (diff)							     \
-		{							     \
-		  R##_e -= diff;					     \
-		  _FP_FRAC_SLL_##wc(R, diff);				     \
-		}							     \
-	    }								     \
-	}								     \
-      break;								     \
-    }									     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):				     \
-    _FP_CHOOSENAN(fs, wc, R, X, Y);					     \
-    break;								     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):			     \
-    R##_e = X##_e;							     \
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):			     \
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):				     \
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):				     \
-    _FP_FRAC_COPY_##wc(R, X);						     \
-    R##_s = X##_s;							     \
-    R##_c = X##_c;							     \
-    break;								     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):			     \
-    R##_e = Y##_e;							     \
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):			     \
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):				     \
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):				     \
-    _FP_FRAC_COPY_##wc(R, Y);						     \
-    R##_s = Y##_s;							     \
-    R##_c = Y##_c;							     \
-    break;								     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):				     \
-    if (X##_s != Y##_s)							     \
-      {									     \
-	/* +INF + -INF => NAN */					     \
-	_FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);				     \
-	R##_s = X##_s ^ Y##_s;						     \
-	R##_c = FP_CLS_NAN;						     \
-	break;								     \
-      }									     \
-    /* FALLTHRU */							     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):			     \
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):				     \
-    R##_s = X##_s;							     \
-    R##_c = FP_CLS_INF;							     \
-    break;								     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):			     \
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):				     \
-    R##_s = Y##_s;							     \
-    R##_c = FP_CLS_INF;							     \
-    break;								     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):			     \
-    /* make sure the sign is correct */					     \
-    if (FP_ROUNDMODE == FP_RND_MINF)					     \
-      R##_s = X##_s | Y##_s;						     \
-    else								     \
-      R##_s = X##_s & Y##_s;						     \
-    R##_c = FP_CLS_ZERO;						     \
-    break;								     \
-									     \
-  default:								     \
-    abort();								     \
-  }									     \
-} while (0)
-
-
-/*
- * Main negation routine.  FIXME -- when we care about setting exception
- * bits reliably, this will not do.  We should examine all of the fp classes.
- */
-
-#define _FP_NEG(fs, wc, R, X)		\
-  do {					\
-    _FP_FRAC_COPY_##wc(R, X);		\
-    R##_c = X##_c;			\
-    R##_e = X##_e;			\
-    R##_s = 1 ^ X##_s;			\
-  } while (0)
-
-
-/*
- * Main multiplication routine.  The input values should be cooked.
- */
-
-#define _FP_MUL(fs, wc, R, X, Y)			\
-do {							\
-  R##_s = X##_s ^ Y##_s;				\
-  switch (_FP_CLS_COMBINE(X##_c, Y##_c))		\
-  {							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):	\
-    R##_c = FP_CLS_NORMAL;				\
-    R##_e = X##_e + Y##_e + 1;				\
-							\
-    _FP_MUL_MEAT_##fs(R,X,Y);				\
-							\
-    if (_FP_FRAC_OVERP_##wc(fs, R))			\
-      _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs);	\
-    else						\
-      R##_e--;						\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):		\
-    _FP_CHOOSENAN(fs, wc, R, X, Y);			\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):	\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):		\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):		\
-    R##_s = X##_s;					\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):		\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):	\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):	\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):	\
-    _FP_FRAC_COPY_##wc(R, X);				\
-    R##_c = X##_c;					\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):	\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):		\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):		\
-    R##_s = Y##_s;					\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):	\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):	\
-    _FP_FRAC_COPY_##wc(R, Y);				\
-    R##_c = Y##_c;					\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):		\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):		\
-    R##_c = FP_CLS_NAN;					\
-    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);		\
-    break;						\
-							\
-  default:						\
-    abort();						\
-  }							\
-} while (0)
-
-
-/*
- * Main division routine.  The input values should be cooked.
- */
-
-#define _FP_DIV(fs, wc, R, X, Y)			\
-do {							\
-  R##_s = X##_s ^ Y##_s;				\
-  switch (_FP_CLS_COMBINE(X##_c, Y##_c))		\
-  {							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):	\
-    R##_c = FP_CLS_NORMAL;				\
-    R##_e = X##_e - Y##_e;				\
-							\
-    _FP_DIV_MEAT_##fs(R,X,Y);				\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):		\
-    _FP_CHOOSENAN(fs, wc, R, X, Y);			\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):	\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):		\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):		\
-    R##_s = X##_s;					\
-    _FP_FRAC_COPY_##wc(R, X);				\
-    R##_c = X##_c;					\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):	\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):		\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):		\
-    R##_s = Y##_s;					\
-    _FP_FRAC_COPY_##wc(R, Y);				\
-    R##_c = Y##_c;					\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):	\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):		\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):	\
-    R##_c = FP_CLS_ZERO;				\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):	\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):		\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):	\
-    R##_c = FP_CLS_INF;					\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):		\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):	\
-    R##_c = FP_CLS_NAN;					\
-    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);		\
-    break;						\
-							\
-  default:						\
-    abort();						\
-  }							\
-} while (0)
-
-
-/*
- * Main differential comparison routine.  The inputs should be raw not
- * cooked.  The return is -1,0,1 for normal values, 2 otherwise.
- */
-
-#define _FP_CMP(fs, wc, ret, X, Y, un)					\
-  do {									\
-    /* NANs are unordered */						\
-    if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X))		\
-	|| (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y)))	\
-      {									\
-	ret = un;							\
-      }									\
-    else								\
-      {									\
-        int __x_zero = (!X##_e && _FP_FRAC_ZEROP_##wc(X)) ? 1 : 0;	\
-        int __y_zero = (!Y##_e && _FP_FRAC_ZEROP_##wc(Y)) ? 1 : 0;	\
-									\
-	if (__x_zero && __y_zero)					\
-	  ret = 0;							\
-	else if (__x_zero)						\
-	  ret = Y##_s ? 1 : -1;						\
-	else if (__y_zero)						\
-	  ret = X##_s ? -1 : 1;						\
-	else if (X##_s != Y##_s)					\
-	  ret = X##_s ? -1 : 1;						\
-	else if (X##_e > Y##_e)						\
-	  ret = X##_s ? -1 : 1;						\
-	else if (X##_e < Y##_e)						\
-	  ret = X##_s ? 1 : -1;						\
-	else if (_FP_FRAC_GT_##wc(X, Y))				\
-	  ret = X##_s ? -1 : 1;						\
-	else if (_FP_FRAC_GT_##wc(Y, X))				\
-	  ret = X##_s ? 1 : -1;						\
-	else								\
-	  ret = 0;							\
-      }									\
-  } while (0)
-
-
-/* Simplification for strict equality.  */
-
-#define _FP_CMP_EQ(fs, wc, ret, X, Y)					  \
-  do {									  \
-    /* NANs are unordered */						  \
-    if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X))		  \
-	|| (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y)))	  \
-      {									  \
-	ret = 1;							  \
-      }									  \
-    else								  \
-      {									  \
-	ret = !(X##_e == Y##_e						  \
-		&& _FP_FRAC_EQ_##wc(X, Y)				  \
-		&& (X##_s == Y##_s || !X##_e && _FP_FRAC_ZEROP_##wc(X))); \
-      }									  \
-  } while (0)
-
-/*
- * Main square root routine.  The input value should be cooked.
- */
-
-#define _FP_SQRT(fs, wc, R, X)						\
-do {									\
-    _FP_FRAC_DECL_##wc(T); _FP_FRAC_DECL_##wc(S);			\
-    _FP_W_TYPE q;							\
-    switch (X##_c)							\
-    {									\
-    case FP_CLS_NAN:							\
-    	R##_s = 0;							\
-    	R##_c = FP_CLS_NAN;						\
-    	_FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
-    	break;								\
-    case FP_CLS_INF:							\
-    	if (X##_s)							\
-    	  {								\
-    	    R##_s = 0;							\
-	    R##_c = FP_CLS_NAN; /* sNAN */				\
-    	  }								\
-    	else								\
-    	  {								\
-    	    R##_s = 0;							\
-    	    R##_c = FP_CLS_INF; /* sqrt(+inf) = +inf */			\
-    	  }								\
-    	break;								\
-    case FP_CLS_ZERO:							\
-	R##_s = X##_s;							\
-    	R##_c = FP_CLS_ZERO; /* sqrt(+-0) = +-0 */			\
-	break;								\
-    case FP_CLS_NORMAL:							\
-    	R##_s = 0;							\
-        if (X##_s)							\
-          {								\
-	    R##_c = FP_CLS_NAN; /* sNAN */				\
-	    break;							\
-          }								\
-    	R##_c = FP_CLS_NORMAL;						\
-        if (X##_e & 1)							\
-          _FP_FRAC_SLL_##wc(X, 1);					\
-        R##_e = X##_e >> 1;						\
-        _FP_FRAC_SET_##wc(S, _FP_ZEROFRAC_##wc);			\
-        _FP_FRAC_SET_##wc(R, _FP_ZEROFRAC_##wc);			\
-        q = _FP_OVERFLOW_##fs;						\
-        _FP_FRAC_SLL_##wc(X, 1);					\
-        _FP_SQRT_MEAT_##wc(R, S, T, X, q);				\
-        _FP_FRAC_SRL_##wc(R, 1);					\
-    }									\
-  } while (0)
-
-/*
- * Convert from FP to integer
- */
-
-/* "When a NaN, infinity, large positive argument >= 2147483648.0, or
- * large negative argument <= -2147483649.0 is converted to an integer,
- * the invalid_current bit...should be set and fp_exception_IEEE_754 should
- * be raised. If the floating point invalid trap is disabled, no trap occurs
- * and a numerical result is generated: if the sign bit of the operand
- * is 0, the result is 2147483647; if the sign bit of the operand is 1,
- * the result is -2147483648."
- * Similarly for conversion to extended ints, except that the boundaries
- * are >= 2^63, <= -(2^63 + 1), and the results are 2^63 + 1 for s=0 and
- * -2^63 for s=1.
- * -- SPARC Architecture Manual V9, Appendix B, which specifies how
- * SPARCs resolve implementation dependencies in the IEEE-754 spec.
- * I don't believe that the code below follows this. I'm not even sure
- * it's right!
- * It doesn't cope with needing to convert to an n bit integer when there
- * is no n bit integer type. Fortunately gcc provides long long so this
- * isn't a problem for sparc32.
- * I have, however, fixed its NaN handling to conform as above.
- *         -- PMM 02/1998
- * NB: rsigned is not 'is r declared signed?' but 'should the value stored
- * in r be signed or unsigned?'. r is always(?) declared unsigned.
- * Comments below are mine, BTW -- PMM
- */
-#define _FP_TO_INT(fs, wc, r, X, rsize, rsigned)			\
-  do {									\
-    switch (X##_c)							\
-      {									\
-      case FP_CLS_NORMAL:						\
-	if (X##_e < 0)							\
-	  {								\
-	  /* case FP_CLS_NAN: see above! */				\
-	  case FP_CLS_ZERO:						\
-	    r = 0;							\
-	  }								\
-	else if (X##_e >= rsize - (rsigned != 0))			\
-	  {	/* overflow */						\
-	  case FP_CLS_NAN:                                              \
-          case FP_CLS_INF:						\
-	    if (rsigned)						\
-	      {								\
-		r = 1;							\
-		r <<= rsize - 1;					\
-		r -= 1 - X##_s;						\
-	      }								\
-	    else							\
-	      {								\
-		r = 0;							\
-		if (!X##_s)						\
-		  r = ~r;						\
-	      }								\
-	  }								\
-	else								\
-	  {								\
-	    if (_FP_W_TYPE_SIZE*wc < rsize)				\
-	      {								\
-		_FP_FRAC_ASSEMBLE_##wc(r, X, rsize);			\
-		r <<= X##_e - _FP_WFRACBITS_##fs;			\
-	      }								\
-	    else							\
-	      {								\
-		if (X##_e >= _FP_WFRACBITS_##fs)			\
-		  _FP_FRAC_SLL_##wc(X, (X##_e - _FP_WFRACBITS_##fs + 1));\
-		else							\
-		  _FP_FRAC_SRL_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 1));\
-		_FP_FRAC_ASSEMBLE_##wc(r, X, rsize);			\
-	      }								\
-	    if (rsigned && X##_s)					\
-	      r = -r;							\
-	  }								\
-	break;								\
-      }									\
-  } while (0)
-
-#define _FP_FROM_INT(fs, wc, X, r, rsize, rtype)			\
-  do {									\
-    if (r)								\
-      {									\
-	X##_c = FP_CLS_NORMAL;						\
-									\
-	if ((X##_s = (r < 0)))						\
-	  r = -r;							\
-	/* Note that `r' is now considered unsigned, so we don't have	\
-	   to worry about the single signed overflow case.  */		\
-									\
-	if (rsize <= _FP_W_TYPE_SIZE)					\
-	  __FP_CLZ(X##_e, r);						\
-	else								\
-	  __FP_CLZ_2(X##_e, (_FP_W_TYPE)(r >> _FP_W_TYPE_SIZE), 	\
-		     (_FP_W_TYPE)r);					\
-	if (rsize < _FP_W_TYPE_SIZE)					\
-		X##_e -= (_FP_W_TYPE_SIZE - rsize);			\
-	X##_e = rsize - X##_e - 1;					\
-									\
-	if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs < X##_e)	\
-	  __FP_FRAC_SRS_1(r, (X##_e - _FP_WFRACBITS_##fs), rsize);	\
-	r &= ~((_FP_W_TYPE)1 << X##_e);					\
-	_FP_FRAC_DISASSEMBLE_##wc(X, ((unsigned rtype)r), rsize);	\
-	_FP_FRAC_SLL_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 1));		\
-      }									\
-    else								\
-      {									\
-	X##_c = FP_CLS_ZERO, X##_s = 0;					\
-      }									\
-  } while (0)
-
-
-#define FP_CONV(dfs,sfs,dwc,swc,D,S)			\
-  do {							\
-    _FP_FRAC_CONV_##dwc##_##swc(dfs, sfs, D, S);	\
-    D##_e = S##_e;					\
-    D##_c = S##_c;					\
-    D##_s = S##_s;					\
-  } while (0)
-
-/*
- * Helper primitives.
- */
-
-/* Count leading zeros in a word.  */
-
-#ifndef __FP_CLZ
-#if _FP_W_TYPE_SIZE < 64
-/* this is just to shut the compiler up about shifts > word length -- PMM 02/1998 */
-#define __FP_CLZ(r, x)				\
-  do {						\
-    _FP_W_TYPE _t = (x);			\
-    r = _FP_W_TYPE_SIZE - 1;			\
-    if (_t > 0xffff) r -= 16;			\
-    if (_t > 0xffff) _t >>= 16;			\
-    if (_t > 0xff) r -= 8;			\
-    if (_t > 0xff) _t >>= 8;			\
-    if (_t & 0xf0) r -= 4;			\
-    if (_t & 0xf0) _t >>= 4;			\
-    if (_t & 0xc) r -= 2;			\
-    if (_t & 0xc) _t >>= 2;			\
-    if (_t & 0x2) r -= 1;			\
-  } while (0)
-#else /* not _FP_W_TYPE_SIZE < 64 */
-#define __FP_CLZ(r, x)				\
-  do {						\
-    _FP_W_TYPE _t = (x);			\
-    r = _FP_W_TYPE_SIZE - 1;			\
-    if (_t > 0xffffffff) r -= 32;		\
-    if (_t > 0xffffffff) _t >>= 32;		\
-    if (_t > 0xffff) r -= 16;			\
-    if (_t > 0xffff) _t >>= 16;			\
-    if (_t > 0xff) r -= 8;			\
-    if (_t > 0xff) _t >>= 8;			\
-    if (_t & 0xf0) r -= 4;			\
-    if (_t & 0xf0) _t >>= 4;			\
-    if (_t & 0xc) r -= 2;			\
-    if (_t & 0xc) _t >>= 2;			\
-    if (_t & 0x2) r -= 1;			\
-  } while (0)
-#endif /* not _FP_W_TYPE_SIZE < 64 */
-#endif /* ndef __FP_CLZ */
-
-#define _FP_DIV_HELP_imm(q, r, n, d)		\
-  do {						\
-    q = n / d, r = n % d;			\
-  } while (0)
-
diff --git a/arch/powerpc/math-emu/sfp-machine.h b/arch/powerpc/math-emu/sfp-machine.h
deleted file mode 100644
index 4b17d83..0000000
--- a/arch/powerpc/math-emu/sfp-machine.h
+++ /dev/null
@@ -1,377 +0,0 @@
-/* Machine-dependent software floating-point definitions.  PPC version.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If
-   not, write to the Free Software Foundation, Inc.,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-   Actually, this is a PPC (32bit) version, written based on the
-   i386, sparc, and sparc64 versions, by me,
-   Peter Maydell (pmaydell@chiark.greenend.org.uk).
-   Comments are by and large also mine, although they may be inaccurate.
-
-   In picking out asm fragments I've gone with the lowest common
-   denominator, which also happens to be the hardware I have :->
-   That is, a SPARC without hardware multiply and divide.
- */
-
-/* basic word size definitions */
-#define _FP_W_TYPE_SIZE		32
-#define _FP_W_TYPE		unsigned long
-#define _FP_WS_TYPE		signed long
-#define _FP_I_TYPE		long
-
-#define __ll_B			((UWtype) 1 << (W_TYPE_SIZE / 2))
-#define __ll_lowpart(t)		((UWtype) (t) & (__ll_B - 1))
-#define __ll_highpart(t)	((UWtype) (t) >> (W_TYPE_SIZE / 2))
-
-/* You can optionally code some things like addition in asm. For
- * example, i386 defines __FP_FRAC_ADD_2 as asm. If you don't
- * then you get a fragment of C code [if you change an #ifdef 0
- * in op-2.h] or a call to add_ssaaaa (see below).
- * Good places to look for asm fragments to use are gcc and glibc.
- * gcc's longlong.h is useful.
- */
-
-/* We need to know how to multiply and divide. If the host word size
- * is >= 2*fracbits you can use FP_MUL_MEAT_n_imm(t,R,X,Y) which
- * codes the multiply with whatever gcc does to 'a * b'.
- * _FP_MUL_MEAT_n_wide(t,R,X,Y,f) is used when you have an asm
- * function that can multiply two 1W values and get a 2W result.
- * Otherwise you're stuck with _FP_MUL_MEAT_n_hard(t,R,X,Y) which
- * does bitshifting to avoid overflow.
- * For division there is FP_DIV_MEAT_n_imm(t,R,X,Y,f) for word size
- * >= 2*fracbits, where f is either _FP_DIV_HELP_imm or
- * _FP_DIV_HELP_ldiv (see op-1.h).
- * _FP_DIV_MEAT_udiv() is if you have asm to do 2W/1W => (1W, 1W).
- * [GCC and glibc have longlong.h which has the asm macro udiv_qrnnd
- * to do this.]
- * In general, 'n' is the number of words required to hold the type,
- * and 't' is either S, D or Q for single/double/quad.
- *           -- PMM
- */
-/* Example: SPARC64:
- * #define _FP_MUL_MEAT_S(R,X,Y)	_FP_MUL_MEAT_1_imm(S,R,X,Y)
- * #define _FP_MUL_MEAT_D(R,X,Y)	_FP_MUL_MEAT_1_wide(D,R,X,Y,umul_ppmm)
- * #define _FP_MUL_MEAT_Q(R,X,Y)	_FP_MUL_MEAT_2_wide(Q,R,X,Y,umul_ppmm)
- *
- * #define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
- * #define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv(D,R,X,Y)
- * #define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv_64(Q,R,X,Y)
- *
- * Example: i386:
- * #define _FP_MUL_MEAT_S(R,X,Y)   _FP_MUL_MEAT_1_wide(S,R,X,Y,_i386_mul_32_64)
- * #define _FP_MUL_MEAT_D(R,X,Y)   _FP_MUL_MEAT_2_wide(D,R,X,Y,_i386_mul_32_64)
- *
- * #define _FP_DIV_MEAT_S(R,X,Y)   _FP_DIV_MEAT_1_udiv(S,R,X,Y,_i386_div_64_32)
- * #define _FP_DIV_MEAT_D(R,X,Y)   _FP_DIV_MEAT_2_udiv_64(D,R,X,Y)
- */
-
-#define _FP_MUL_MEAT_S(R,X,Y)   _FP_MUL_MEAT_1_wide(S,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_D(R,X,Y)   _FP_MUL_MEAT_2_wide(D,R,X,Y,umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R,X,Y)   _FP_DIV_MEAT_1_udiv(S,R,X,Y)
-#define _FP_DIV_MEAT_D(R,X,Y)   _FP_DIV_MEAT_2_udiv_64(D,R,X,Y)
-
-/* These macros define what NaN looks like. They're supposed to expand to
- * a comma-separated set of 32bit unsigned ints that encode NaN.
- */
-#define _FP_NANFRAC_S		_FP_QNANBIT_S
-#define _FP_NANFRAC_D		_FP_QNANBIT_D, 0
-#define _FP_NANFRAC_Q           _FP_QNANBIT_Q, 0, 0, 0
-
-#define _FP_KEEPNANFRACP 1
-
-/* This macro appears to be called when both X and Y are NaNs, and
- * has to choose one and copy it to R. i386 goes for the larger of the
- * two, sparc64 just picks Y. I don't understand this at all so I'll
- * go with sparc64 because it's shorter :->   -- PMM
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y)			\
-  do {							\
-    R##_s = Y##_s;					\
-    _FP_FRAC_COPY_##wc(R,Y);				\
-    R##_c = FP_CLS_NAN;					\
-  } while (0)
-
-
-extern void fp_unpack_d(long *, unsigned long *, unsigned long *,
-			long *, long *, void *);
-extern int  fp_pack_d(void *, long, unsigned long, unsigned long, long, long);
-extern int  fp_pack_ds(void *, long, unsigned long, unsigned long, long, long);
-
-#define __FP_UNPACK_RAW_1(fs, X, val)			\
-  do {							\
-    union _FP_UNION_##fs *_flo =			\
-    	(union _FP_UNION_##fs *)val;			\
-							\
-    X##_f = _flo->bits.frac;				\
-    X##_e = _flo->bits.exp;				\
-    X##_s = _flo->bits.sign;				\
-  } while (0)
-
-#define __FP_UNPACK_RAW_2(fs, X, val)			\
-  do {							\
-    union _FP_UNION_##fs *_flo =			\
-    	(union _FP_UNION_##fs *)val;			\
-							\
-    X##_f0 = _flo->bits.frac0;				\
-    X##_f1 = _flo->bits.frac1;				\
-    X##_e  = _flo->bits.exp;				\
-    X##_s  = _flo->bits.sign;				\
-  } while (0)
-
-#define __FP_UNPACK_S(X,val)		\
-  do {					\
-    __FP_UNPACK_RAW_1(S,X,val);		\
-    _FP_UNPACK_CANONICAL(S,1,X);	\
-  } while (0)
-
-#define __FP_UNPACK_D(X,val)		\
-	fp_unpack_d(&X##_s, &X##_f1, &X##_f0, &X##_e, &X##_c, val)
-
-#define __FP_PACK_RAW_1(fs, val, X)			\
-  do {							\
-    union _FP_UNION_##fs *_flo =			\
-    	(union _FP_UNION_##fs *)val;			\
-							\
-    _flo->bits.frac = X##_f;				\
-    _flo->bits.exp  = X##_e;				\
-    _flo->bits.sign = X##_s;				\
-  } while (0)
-
-#define __FP_PACK_RAW_2(fs, val, X)			\
-  do {							\
-    union _FP_UNION_##fs *_flo =			\
-    	(union _FP_UNION_##fs *)val;			\
-							\
-    _flo->bits.frac0 = X##_f0;				\
-    _flo->bits.frac1 = X##_f1;				\
-    _flo->bits.exp   = X##_e;				\
-    _flo->bits.sign  = X##_s;				\
-  } while (0)
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#define __FPU_FPSCR	(current->thread.fpscr.val)
-
-/* We only actually write to the destination register
- * if exceptions signalled (if any) will not trap.
- */
-#define __FPU_ENABLED_EXC \
-({						\
-	(__FPU_FPSCR >> 3) & 0x1f;	\
-})
-
-#define __FPU_TRAP_P(bits) \
-	((__FPU_ENABLED_EXC & (bits)) != 0)
-
-#define __FP_PACK_S(val,X)			\
-({  int __exc = _FP_PACK_CANONICAL(S,1,X);	\
-    if(!__exc || !__FPU_TRAP_P(__exc))		\
-        __FP_PACK_RAW_1(S,val,X);		\
-    __exc;					\
-})
-
-#define __FP_PACK_D(val,X)			\
-	fp_pack_d(val, X##_s, X##_f1, X##_f0, X##_e, X##_c)
-
-#define __FP_PACK_DS(val,X)			\
-	fp_pack_ds(val, X##_s, X##_f1, X##_f0, X##_e, X##_c)
-
-/* Obtain the current rounding mode. */
-#define FP_ROUNDMODE			\
-({					\
-	__FPU_FPSCR & 0x3;		\
-})
-
-/* the asm fragments go here: all these are taken from glibc-2.0.5's
- * stdlib/longlong.h
- */
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/* add_ssaaaa is used in op-2.h and should be equivalent to
- * #define add_ssaaaa(sh,sl,ah,al,bh,bl) (sh = ah+bh+ (( sl = al+bl) < al))
- * add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
- * high_addend_2, low_addend_2) adds two UWtype integers, composed by
- * HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2
- * respectively.  The result is placed in HIGH_SUM and LOW_SUM.  Overflow
- * (i.e. carry out) is not stored anywhere, and is lost.
- */
-#define add_ssaaaa(sh, sl, ah, al, bh, bl)				\
-  do {									\
-    if (__builtin_constant_p (bh) && (bh) == 0)				\
-      __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2"		\
-	     : "=r" ((USItype)(sh)),					\
-	       "=&r" ((USItype)(sl))					\
-	     : "%r" ((USItype)(ah)),					\
-	       "%r" ((USItype)(al)),					\
-	       "rI" ((USItype)(bl)));					\
-    else if (__builtin_constant_p (bh) && (bh) ==~(USItype) 0)		\
-      __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2"		\
-	     : "=r" ((USItype)(sh)),					\
-	       "=&r" ((USItype)(sl))					\
-	     : "%r" ((USItype)(ah)),					\
-	       "%r" ((USItype)(al)),					\
-	       "rI" ((USItype)(bl)));					\
-    else								\
-      __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3"		\
-	     : "=r" ((USItype)(sh)),					\
-	       "=&r" ((USItype)(sl))					\
-	     : "%r" ((USItype)(ah)),					\
-	       "r" ((USItype)(bh)),					\
-	       "%r" ((USItype)(al)),					\
-	       "rI" ((USItype)(bl)));					\
-  } while (0)
-
-/* sub_ddmmss is used in op-2.h and udivmodti4.c and should be equivalent to
- * #define sub_ddmmss(sh, sl, ah, al, bh, bl) (sh = ah-bh - ((sl = al-bl) > al))
- * sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend,
- * high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers,
- * composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and
- * LOW_SUBTRAHEND_2 respectively.  The result is placed in HIGH_DIFFERENCE
- * and LOW_DIFFERENCE.  Overflow (i.e. carry out) is not stored anywhere,
- * and is lost.
- */
-#define sub_ddmmss(sh, sl, ah, al, bh, bl)				\
-  do {									\
-    if (__builtin_constant_p (ah) && (ah) == 0)				\
-      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2"	\
-	       : "=r" ((USItype)(sh)),					\
-		 "=&r" ((USItype)(sl))					\
-	       : "r" ((USItype)(bh)),					\
-		 "rI" ((USItype)(al)),					\
-		 "r" ((USItype)(bl)));					\
-    else if (__builtin_constant_p (ah) && (ah) ==~(USItype) 0)		\
-      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2"	\
-	       : "=r" ((USItype)(sh)),					\
-		 "=&r" ((USItype)(sl))					\
-	       : "r" ((USItype)(bh)),					\
-		 "rI" ((USItype)(al)),					\
-		 "r" ((USItype)(bl)));					\
-    else if (__builtin_constant_p (bh) && (bh) == 0)			\
-      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2"		\
-	       : "=r" ((USItype)(sh)),					\
-		 "=&r" ((USItype)(sl))					\
-	       : "r" ((USItype)(ah)),					\
-		 "rI" ((USItype)(al)),					\
-		 "r" ((USItype)(bl)));					\
-    else if (__builtin_constant_p (bh) && (bh) ==~(USItype) 0)		\
-      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2"		\
-	       : "=r" ((USItype)(sh)),					\
-		 "=&r" ((USItype)(sl))					\
-	       : "r" ((USItype)(ah)),					\
-		 "rI" ((USItype)(al)),					\
-		 "r" ((USItype)(bl)));					\
-    else								\
-      __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2"	\
-	       : "=r" ((USItype)(sh)),					\
-		 "=&r" ((USItype)(sl))					\
-	       : "r" ((USItype)(ah)),					\
-		 "r" ((USItype)(bh)),					\
-		 "rI" ((USItype)(al)),					\
-		 "r" ((USItype)(bl)));					\
-  } while (0)
-
-/* asm fragments for mul and div */
-
-/* umul_ppmm(high_prod, low_prod, multipler, multiplicand) multiplies two
- * UWtype integers MULTIPLER and MULTIPLICAND, and generates a two UWtype
- * word product in HIGH_PROD and LOW_PROD.
- */
-#define umul_ppmm(ph, pl, m0, m1)					\
-  do {									\
-    USItype __m0 = (m0), __m1 = (m1);					\
-    __asm__ ("mulhwu %0,%1,%2"						\
-	     : "=r" ((USItype)(ph))					\
-	     : "%r" (__m0),						\
-               "r" (__m1));						\
-    (pl) = __m0 * __m1;							\
-  } while (0)
-
-/* udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
- * denominator) divides a UDWtype, composed by the UWtype integers
- * HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient
- * in QUOTIENT and the remainder in REMAINDER.  HIGH_NUMERATOR must be less
- * than DENOMINATOR for correct operation.  If, in addition, the most
- * significant bit of DENOMINATOR must be 1, then the pre-processor symbol
- * UDIV_NEEDS_NORMALIZATION is defined to 1.
- */
-#define udiv_qrnnd(q, r, n1, n0, d)					\
-  do {									\
-    UWtype __d1, __d0, __q1, __q0, __r1, __r0, __m;			\
-    __d1 = __ll_highpart (d);						\
-    __d0 = __ll_lowpart (d);						\
-									\
-    __r1 = (n1) % __d1;							\
-    __q1 = (n1) / __d1;							\
-    __m = (UWtype) __q1 * __d0;						\
-    __r1 = __r1 * __ll_B | __ll_highpart (n0);				\
-    if (__r1 < __m)							\
-      {									\
-	__q1--, __r1 += (d);						\
-	if (__r1 >= (d)) /* we didn't get carry when adding to __r1 */	\
-	  if (__r1 < __m)						\
-	    __q1--, __r1 += (d);					\
-      }									\
-    __r1 -= __m;							\
-									\
-    __r0 = __r1 % __d1;							\
-    __q0 = __r1 / __d1;							\
-    __m = (UWtype) __q0 * __d0;						\
-    __r0 = __r0 * __ll_B | __ll_lowpart (n0);				\
-    if (__r0 < __m)							\
-      {									\
-	__q0--, __r0 += (d);						\
-	if (__r0 >= (d))						\
-	  if (__r0 < __m)						\
-	    __q0--, __r0 += (d);					\
-      }									\
-    __r0 -= __m;							\
-									\
-    (q) = (UWtype) __q1 * __ll_B | __q0;				\
-    (r) = __r0;								\
-  } while (0)
-
-#define UDIV_NEEDS_NORMALIZATION 1
-
-#define abort()								\
-	return 0
-
-#ifdef __BIG_ENDIAN
-#define __BYTE_ORDER __BIG_ENDIAN
-#else
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#endif
-
-/* Exception flags. */
-#define EFLAG_INVALID		(1 << (31 - 2))
-#define EFLAG_OVERFLOW		(1 << (31 - 3))
-#define EFLAG_UNDERFLOW		(1 << (31 - 4))
-#define EFLAG_DIVZERO		(1 << (31 - 5))
-#define EFLAG_INEXACT		(1 << (31 - 6))
-
-#define EFLAG_VXSNAN		(1 << (31 - 7))
-#define EFLAG_VXISI		(1 << (31 - 8))
-#define EFLAG_VXIDI		(1 << (31 - 9))
-#define EFLAG_VXZDZ		(1 << (31 - 10))
-#define EFLAG_VXIMZ		(1 << (31 - 11))
-#define EFLAG_VXVC		(1 << (31 - 12))
-#define EFLAG_VXSOFT		(1 << (31 - 21))
-#define EFLAG_VXSQRT		(1 << (31 - 22))
-#define EFLAG_VXCVI		(1 << (31 - 23))
diff --git a/arch/powerpc/math-emu/single.h b/arch/powerpc/math-emu/single.h
deleted file mode 100644
index f19d994..0000000
--- a/arch/powerpc/math-emu/single.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Definitions for IEEE Single Precision
- */
-
-#if _FP_W_TYPE_SIZE < 32
-#error "Here's a nickel kid.  Go buy yourself a real computer."
-#endif
-
-#define _FP_FRACBITS_S		24
-#define _FP_FRACXBITS_S		(_FP_W_TYPE_SIZE - _FP_FRACBITS_S)
-#define _FP_WFRACBITS_S		(_FP_WORKBITS + _FP_FRACBITS_S)
-#define _FP_WFRACXBITS_S	(_FP_W_TYPE_SIZE - _FP_WFRACBITS_S)
-#define _FP_EXPBITS_S		8
-#define _FP_EXPBIAS_S		127
-#define _FP_EXPMAX_S		255
-#define _FP_QNANBIT_S		((_FP_W_TYPE)1 << (_FP_FRACBITS_S-2))
-#define _FP_IMPLBIT_S		((_FP_W_TYPE)1 << (_FP_FRACBITS_S-1))
-#define _FP_OVERFLOW_S		((_FP_W_TYPE)1 << (_FP_WFRACBITS_S))
-
-/* The implementation of _FP_MUL_MEAT_S and _FP_DIV_MEAT_S should be
-   chosen by the target machine.  */
-
-union _FP_UNION_S
-{
-  float flt;
-  struct {
-#if __BYTE_ORDER == __BIG_ENDIAN
-    unsigned sign : 1;
-    unsigned exp  : _FP_EXPBITS_S;
-    unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0);
-#else
-    unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0);
-    unsigned exp  : _FP_EXPBITS_S;
-    unsigned sign : 1;
-#endif
-  } bits __attribute__((packed));
-};
-
-#define FP_DECL_S(X)		_FP_DECL(1,X)
-#define FP_UNPACK_RAW_S(X,val)	_FP_UNPACK_RAW_1(S,X,val)
-#define FP_PACK_RAW_S(val,X)	_FP_PACK_RAW_1(S,val,X)
-
-#define FP_UNPACK_S(X,val)		\
-  do {					\
-    _FP_UNPACK_RAW_1(S,X,val);		\
-    _FP_UNPACK_CANONICAL(S,1,X);	\
-  } while (0)
-
-#define FP_PACK_S(val,X)		\
-  do {					\
-    _FP_PACK_CANONICAL(S,1,X);		\
-    _FP_PACK_RAW_1(S,val,X);		\
-  } while (0)
-
-#define FP_NEG_S(R,X)		_FP_NEG(S,1,R,X)
-#define FP_ADD_S(R,X,Y)		_FP_ADD(S,1,R,X,Y)
-#define FP_SUB_S(R,X,Y)		_FP_SUB(S,1,R,X,Y)
-#define FP_MUL_S(R,X,Y)		_FP_MUL(S,1,R,X,Y)
-#define FP_DIV_S(R,X,Y)		_FP_DIV(S,1,R,X,Y)
-#define FP_SQRT_S(R,X)		_FP_SQRT(S,1,R,X)
-
-#define FP_CMP_S(r,X,Y,un)	_FP_CMP(S,1,r,X,Y,un)
-#define FP_CMP_EQ_S(r,X,Y)	_FP_CMP_EQ(S,1,r,X,Y)
-
-#define FP_TO_INT_S(r,X,rsz,rsg)  _FP_TO_INT(S,1,r,X,rsz,rsg)
-#define FP_FROM_INT_S(X,r,rs,rt)  _FP_FROM_INT(S,1,X,r,rs,rt)
diff --git a/arch/powerpc/math-emu/soft-fp.h b/arch/powerpc/math-emu/soft-fp.h
deleted file mode 100644
index cca3959..0000000
--- a/arch/powerpc/math-emu/soft-fp.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef SOFT_FP_H
-#define SOFT_FP_H
-
-#include "sfp-machine.h"
-
-#define _FP_WORKBITS		3
-#define _FP_WORK_LSB		((_FP_W_TYPE)1 << 3)
-#define _FP_WORK_ROUND		((_FP_W_TYPE)1 << 2)
-#define _FP_WORK_GUARD		((_FP_W_TYPE)1 << 1)
-#define _FP_WORK_STICKY		((_FP_W_TYPE)1 << 0)
-
-#ifndef FP_RND_NEAREST
-# define FP_RND_NEAREST		0
-# define FP_RND_ZERO		1
-# define FP_RND_PINF		2
-# define FP_RND_MINF		3
-#ifndef FP_ROUNDMODE
-# define FP_ROUNDMODE		FP_RND_NEAREST
-#endif
-#endif
-
-#define _FP_ROUND_NEAREST(wc, X)			\
-({  int __ret = 0;					\
-    int __frac = _FP_FRAC_LOW_##wc(X) & 15;		\
-    if (__frac & 7) {					\
-      __ret = EFLAG_INEXACT;				\
-      if ((__frac & 7) != _FP_WORK_ROUND)		\
-        _FP_FRAC_ADDI_##wc(X, _FP_WORK_ROUND);		\
-      else if (__frac & _FP_WORK_LSB)			\
-        _FP_FRAC_ADDI_##wc(X, _FP_WORK_ROUND);		\
-    }							\
-    __ret;						\
-})
-
-#define _FP_ROUND_ZERO(wc, X)				\
-({  int __ret = 0;					\
-    if (_FP_FRAC_LOW_##wc(X) & 7)			\
-      __ret = EFLAG_INEXACT;				\
-    __ret;						\
-})
-
-#define _FP_ROUND_PINF(wc, X)				\
-({  int __ret = EFLAG_INEXACT;				\
-    if (!X##_s && (_FP_FRAC_LOW_##wc(X) & 7))		\
-      _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB);		\
-    else __ret = 0;					\
-    __ret;						\
-})
-
-#define _FP_ROUND_MINF(wc, X)				\
-({  int __ret = EFLAG_INEXACT;				\
-    if (X##_s && (_FP_FRAC_LOW_##wc(X) & 7))		\
-      _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB);		\
-    else __ret = 0;					\
-    __ret;						\
-})
-
-#define _FP_ROUND(wc, X)			\
-({	int __ret = 0;				\
-	switch (FP_ROUNDMODE)			\
-	{					\
-	  case FP_RND_NEAREST:			\
-	    __ret |= _FP_ROUND_NEAREST(wc,X);	\
-	    break;				\
-	  case FP_RND_ZERO:			\
-	    __ret |= _FP_ROUND_ZERO(wc,X);	\
-	    break;				\
-	  case FP_RND_PINF:			\
-	    __ret |= _FP_ROUND_PINF(wc,X);	\
-	    break;				\
-	  case FP_RND_MINF:			\
-	    __ret |= _FP_ROUND_MINF(wc,X);	\
-	    break;				\
-	};					\
-	__ret;					\
-})
-
-#define FP_CLS_NORMAL		0
-#define FP_CLS_ZERO		1
-#define FP_CLS_INF		2
-#define FP_CLS_NAN		3
-
-#define _FP_CLS_COMBINE(x,y)	(((x) << 2) | (y))
-
-#include "op-1.h"
-#include "op-2.h"
-#include "op-4.h"
-#include "op-common.h"
-
-/* Sigh.  Silly things longlong.h needs.  */
-#define UWtype		_FP_W_TYPE
-#define W_TYPE_SIZE	_FP_W_TYPE_SIZE
-
-typedef int SItype __attribute__((mode(SI)));
-typedef int DItype __attribute__((mode(DI)));
-typedef unsigned int USItype __attribute__((mode(SI)));
-typedef unsigned int UDItype __attribute__((mode(DI)));
-#if _FP_W_TYPE_SIZE == 32
-typedef unsigned int UHWtype __attribute__((mode(HI)));
-#elif _FP_W_TYPE_SIZE == 64
-typedef USItype UHWtype;
-#endif
-
-#endif
diff --git a/arch/powerpc/math-emu/stfs.c b/arch/powerpc/math-emu/stfs.c
index 8689aa4..6122147 100644
--- a/arch/powerpc/math-emu/stfs.c
+++ b/arch/powerpc/math-emu/stfs.c
@@ -2,23 +2,24 @@
 #include <linux/errno.h>
 #include <asm/uaccess.h>
 
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
 
 int
 stfs(void *frS, void *ea)
 {
 	FP_DECL_D(A);
 	FP_DECL_S(R);
+	FP_DECL_EX;
 	float f;
-	int err;
 
 #ifdef DEBUG
 	printk("%s: S %p, ea %p\n", __func__, frS, ea);
 #endif
 
-	__FP_UNPACK_D(A, frS);
+	FP_UNPACK_DP(A, frS);
 
 #ifdef DEBUG
 	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -30,12 +31,12 @@ stfs(void *frS, void *ea)
 	printk("R: %ld %lu %ld (%ld)\n", R_s, R_f, R_e, R_c);
 #endif
 
-	err = _FP_PACK_CANONICAL(S, 1, R);
-	if (!err || !__FPU_TRAP_P(err)) {
-		__FP_PACK_RAW_1(S, &f, R);
+	_FP_PACK_CANONICAL(S, 1, R);
+	if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS)) {
+		_FP_PACK_RAW_1_P(S, &f, R);
 		if (copy_to_user(ea, &f, sizeof(float)))
 			return -EFAULT;
 	}
 
-	return err;
+	return FP_CUR_EXCEPTIONS;
 }
diff --git a/arch/powerpc/math-emu/types.c b/arch/powerpc/math-emu/types.c
deleted file mode 100644
index e1ed15d..0000000
--- a/arch/powerpc/math-emu/types.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-void
-fp_unpack_d(long *_s, unsigned long *_f1, unsigned long *_f0,
-	    long *_e, long *_c, void *val)
-{
-	FP_DECL_D(X);
-
-	__FP_UNPACK_RAW_2(D, X, val);
-
-	_FP_UNPACK_CANONICAL(D, 2, X);
-
-	*_s = X_s;
-	*_f1 = X_f1;
-	*_f0 = X_f0;
-	*_e = X_e;
-	*_c = X_c;
-}
-
-int
-fp_pack_d(void *val, long X_s, unsigned long X_f1,
-	  unsigned long X_f0, long X_e, long X_c)
-{
-	int exc;
-
-	exc = _FP_PACK_CANONICAL(D, 2, X);
-	if (!exc || !__FPU_TRAP_P(exc))
-		__FP_PACK_RAW_2(D, val, X);
-	return exc;
-}
-
-int
-fp_pack_ds(void *val, long X_s, unsigned long X_f1,
-	   unsigned long X_f0, long X_e, long X_c)
-{
-	FP_DECL_S(__X);
-	int exc;
-
-	FP_CONV(S, D, 1, 2, __X, X);
-	exc = _FP_PACK_CANONICAL(S, 1, __X);
-	if (!exc || !__FPU_TRAP_P(exc)) {
-		_FP_UNPACK_CANONICAL(S, 1, __X);
-		FP_CONV(D, S, 2, 1, X, __X);
-		exc |= _FP_PACK_CANONICAL(D, 2, X);
-		if (!exc || !__FPU_TRAP_P(exc))
-			__FP_PACK_RAW_2(D, val, X);
-	}
-	return exc;
-}
diff --git a/arch/powerpc/math-emu/udivmodti4.c b/arch/powerpc/math-emu/udivmodti4.c
index 7e112dc..6172044 100644
--- a/arch/powerpc/math-emu/udivmodti4.c
+++ b/arch/powerpc/math-emu/udivmodti4.c
@@ -1,6 +1,6 @@
 /* This has so very few changes over libgcc2's __udivmoddi4 it isn't funny.  */
 
-#include "soft-fp.h"
+#include <math-emu/soft-fp.h>
 
 #undef count_leading_zeros
 #define count_leading_zeros  __FP_CLZ
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index ce10e2b..23cee39 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -202,7 +202,7 @@ adjust_total_lowmem(void)
 		cam_max_size = max_lowmem_size;
 
 	/* adjust lowmem size to max_lowmem_size */
-	ram = min(max_lowmem_size, (phys_addr_t)total_lowmem);
+	ram = min(max_lowmem_size, total_lowmem);
 
 	/* Calculate CAM values */
 	__cam0 = 1UL << 2 * (__ilog2(ram) / 2);
@@ -225,7 +225,8 @@ adjust_total_lowmem(void)
 	printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb,"
 			" CAM2=%ldMb residual: %ldMb\n",
 			__cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
-			(total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
+			(long int)((total_lowmem - __cam0 - __cam1 - __cam2)
+				   >> 20));
 	__max_low_memory = __cam0 + __cam1 + __cam2;
 	__initial_memory_limit_addr = memstart_addr + __max_low_memory;
 }
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index 9fdf4d6..28a114d 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -41,7 +41,7 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
 		page = pte_page(pte);
 		if (!page_cache_get_speculative(page))
 			return 0;
-		if (unlikely(pte != *ptep)) {
+		if (unlikely(pte_val(pte) != pte_val(*ptep))) {
 			put_page(page);
 			return 0;
 		}
@@ -92,7 +92,7 @@ static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
 		*nr -= refs;
 		return 0;
 	}
-	if (unlikely(pte != *ptep)) {
+	if (unlikely(pte_val(pte) != pte_val(*ptep))) {
 		/* Could be optimized better */
 		while (*nr) {
 			put_page(page);
@@ -237,7 +237,8 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 			pgd_t pgd = *pgdp;
 
 			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
-			pr_debug("  %016lx: normal pgd %p\n", addr, (void *)pgd);
+			pr_debug("  %016lx: normal pgd %p\n", addr,
+				 (void *)pgd_val(pgd));
 			next = pgd_addr_end(addr, end);
 			if (pgd_none(pgd))
 				goto slow;
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index b9ba7d9..7bffb70 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -75,7 +75,7 @@ _GLOBAL(hash_page_sync)
  * Returns to the caller if the access is illegal or there is no
  * mapping for the address.  Otherwise it places an appropriate PTE
  * in the hash table and returns from the exception.
- * Uses r0, r3 - r8, ctr, lr.
+ * Uses r0, r3 - r8, r10, ctr, lr.
  */
 	.text
 _GLOBAL(hash_page)
@@ -106,9 +106,15 @@ _GLOBAL(hash_page)
 	addi	r5,r5,swapper_pg_dir@l	/* kernel page table */
 	rlwimi	r3,r9,32-12,29,29	/* MSR_PR -> _PAGE_USER */
 112:	add	r5,r5,r7		/* convert to phys addr */
+#ifndef CONFIG_PTE_64BIT
 	rlwimi	r5,r4,12,20,29		/* insert top 10 bits of address */
 	lwz	r8,0(r5)		/* get pmd entry */
 	rlwinm.	r8,r8,0,0,19		/* extract address of pte page */
+#else
+	rlwinm	r8,r4,13,19,29		/* Compute pgdir/pmd offset */
+	lwzx	r8,r8,r5		/* Get L1 entry */
+	rlwinm.	r8,r8,0,0,20		/* extract pt base address */
+#endif
 #ifdef CONFIG_SMP
 	beq-	hash_page_out		/* return if no mapping */
 #else
@@ -118,7 +124,11 @@ _GLOBAL(hash_page)
 	   to the address following the rfi. */
 	beqlr-
 #endif
+#ifndef CONFIG_PTE_64BIT
 	rlwimi	r8,r4,22,20,29		/* insert next 10 bits of address */
+#else
+	rlwimi	r8,r4,23,20,28		/* compute pte address */
+#endif
 	rlwinm	r0,r3,32-3,24,24	/* _PAGE_RW access -> _PAGE_DIRTY */
 	ori	r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
 
@@ -127,9 +137,15 @@ _GLOBAL(hash_page)
 	 * because almost always, there won't be a permission violation
 	 * and there won't already be an HPTE, and thus we will have
 	 * to update the PTE to set _PAGE_HASHPTE.  -- paulus.
+	 *
+	 * If PTE_64BIT is set, the low word is the flags word; use that
+	 * word for locking since it contains all the interesting bits.
 	 */
+#if (PTE_FLAGS_OFFSET != 0)
+	addi	r8,r8,PTE_FLAGS_OFFSET
+#endif
 retry:
-	lwarx	r6,0,r8			/* get linux-style pte */
+	lwarx	r6,0,r8			/* get linux-style pte, flag word */
 	andc.	r5,r3,r6		/* check access & ~permission */
 #ifdef CONFIG_SMP
 	bne-	hash_page_out		/* return if access not permitted */
@@ -137,6 +153,15 @@ retry:
 	bnelr-
 #endif
 	or	r5,r0,r6		/* set accessed/dirty bits */
+#ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_SMP
+	subf	r10,r6,r8		/* create false data dependency */
+	subi	r10,r10,PTE_FLAGS_OFFSET
+	lwzx	r10,r6,r10		/* Get upper PTE word */
+#else
+	lwz	r10,-PTE_FLAGS_OFFSET(r8)
+#endif /* CONFIG_SMP */
+#endif /* CONFIG_PTE_64BIT */
 	stwcx.	r5,0,r8			/* attempt to update PTE */
 	bne-	retry			/* retry if someone got there first */
 
@@ -203,9 +228,9 @@ _GLOBAL(add_hash_page)
 	 * we can't take a hash table miss (assuming the code is
 	 * covered by a BAT).  -- paulus
 	 */
-	mfmsr	r10
+	mfmsr	r9
 	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r9,0,17,15		/* clear bit 16 (MSR_EE) */
 	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
 	mtmsr	r0
 	SYNC_601
@@ -214,14 +239,14 @@ _GLOBAL(add_hash_page)
 	tophys(r7,0)
 
 #ifdef CONFIG_SMP
-	addis	r9,r7,mmu_hash_lock@ha
-	addi	r9,r9,mmu_hash_lock@l
-10:	lwarx	r0,0,r9			/* take the mmu_hash_lock */
+	addis	r6,r7,mmu_hash_lock@ha
+	addi	r6,r6,mmu_hash_lock@l
+10:	lwarx	r0,0,r6			/* take the mmu_hash_lock */
 	cmpi	0,r0,0
 	bne-	11f
-	stwcx.	r8,0,r9
+	stwcx.	r8,0,r6
 	beq+	12f
-11:	lwz	r0,0(r9)
+11:	lwz	r0,0(r6)
 	cmpi	0,r0,0
 	beq	10b
 	b	11b
@@ -234,10 +259,24 @@ _GLOBAL(add_hash_page)
 	 * HPTE, so we just unlock and return.
 	 */
 	mr	r8,r5
+#ifndef CONFIG_PTE_64BIT
 	rlwimi	r8,r4,22,20,29
+#else
+	rlwimi	r8,r4,23,20,28
+	addi	r8,r8,PTE_FLAGS_OFFSET
+#endif
 1:	lwarx	r6,0,r8
 	andi.	r0,r6,_PAGE_HASHPTE
 	bne	9f			/* if HASHPTE already set, done */
+#ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_SMP
+	subf	r10,r6,r8		/* create false data dependency */
+	subi	r10,r10,PTE_FLAGS_OFFSET
+	lwzx	r10,r6,r10		/* Get upper PTE word */
+#else
+	lwz	r10,-PTE_FLAGS_OFFSET(r8)
+#endif /* CONFIG_SMP */
+#endif /* CONFIG_PTE_64BIT */
 	ori	r5,r6,_PAGE_HASHPTE
 	stwcx.	r5,0,r8
 	bne-	1b
@@ -246,13 +285,15 @@ _GLOBAL(add_hash_page)
 
 9:
 #ifdef CONFIG_SMP
+	addis	r6,r7,mmu_hash_lock@ha
+	addi	r6,r6,mmu_hash_lock@l
 	eieio
 	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
+	stw	r0,0(r6)		/* clear mmu_hash_lock */
 #endif
 
 	/* reenable interrupts and DR */
-	mtmsr	r10
+	mtmsr	r9
 	SYNC_601
 	isync
 
@@ -267,7 +308,8 @@ _GLOBAL(add_hash_page)
  * r5 contains the linux PTE, r6 contains the old value of the
  * linux PTE (before setting _PAGE_HASHPTE) and r7 contains the
  * offset to be added to addresses (0 if the MMU is on,
- * -KERNELBASE if it is off).
+ * -KERNELBASE if it is off).  r10 contains the upper half of
+ * the PTE if CONFIG_PTE_64BIT.
  * On SMP, the caller should have the mmu_hash_lock held.
  * We assume that the caller has (or will) set the _PAGE_HASHPTE
  * bit in the linux PTE in memory.  The value passed in r6 should
@@ -285,7 +327,7 @@ Hash_bits = 12				/* e.g. 256kB hash table */
 Hash_msk = (((1 << Hash_bits) - 1) * 64)
 
 /* defines for the PTE format for 32-bit PPCs */
-#define PTE_SIZE	8
+#define HPTE_SIZE	8
 #define PTEG_SIZE	64
 #define LG_PTEG_SIZE	6
 #define LDPTEu		lwzu
@@ -313,6 +355,11 @@ _GLOBAL(create_hpte)
 BEGIN_FTR_SECTION
 	ori	r8,r8,_PAGE_COHERENT	/* set M (coherence required) */
 END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
+#ifdef CONFIG_PTE_64BIT
+	/* Put the XPN bits into the PTE */
+	rlwimi	r8,r10,8,20,22
+	rlwimi	r8,r10,2,29,29
+#endif
 
 	/* Construct the high word of the PPC-style PTE (r5) */
 	rlwinm	r5,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
@@ -342,8 +389,8 @@ _GLOBAL(hash_page_patch_A)
 
 	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
 	mtctr	r0
-	addi	r4,r3,-PTE_SIZE
-1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
+	addi	r4,r3,-HPTE_SIZE
+1:	LDPTEu	r6,HPTE_SIZE(r4)	/* get next PTE */
 	CMPPTE	0,r6,r5
 	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
 	beq+	found_slot
@@ -353,9 +400,9 @@ _GLOBAL(hash_page_patch_A)
 _GLOBAL(hash_page_patch_B)
 	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
 	xori	r4,r4,(-PTEG_SIZE & 0xffff)
-	addi	r4,r4,-PTE_SIZE
+	addi	r4,r4,-HPTE_SIZE
 	mtctr	r0
-2:	LDPTEu	r6,PTE_SIZE(r4)
+2:	LDPTEu	r6,HPTE_SIZE(r4)
 	CMPPTE	0,r6,r5
 	bdnzf	2,2b
 	beq+	found_slot
@@ -363,8 +410,8 @@ _GLOBAL(hash_page_patch_B)
 
 	/* Search the primary PTEG for an empty slot */
 10:	mtctr	r0
-	addi	r4,r3,-PTE_SIZE		/* search primary PTEG */
-1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
+	addi	r4,r3,-HPTE_SIZE	/* search primary PTEG */
+1:	LDPTEu	r6,HPTE_SIZE(r4)	/* get next PTE */
 	TST_V(r6)			/* test valid bit */
 	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
 	beq+	found_empty
@@ -380,9 +427,9 @@ _GLOBAL(hash_page_patch_B)
 _GLOBAL(hash_page_patch_C)
 	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
 	xori	r4,r4,(-PTEG_SIZE & 0xffff)
-	addi	r4,r4,-PTE_SIZE
+	addi	r4,r4,-HPTE_SIZE
 	mtctr	r0
-2:	LDPTEu	r6,PTE_SIZE(r4)
+2:	LDPTEu	r6,HPTE_SIZE(r4)
 	TST_V(r6)
 	bdnzf	2,2b
 	beq+	found_empty
@@ -409,11 +456,11 @@ _GLOBAL(hash_page_patch_C)
 
 1:	addis	r4,r7,next_slot@ha		/* get next evict slot */
 	lwz	r6,next_slot@l(r4)
-	addi	r6,r6,PTE_SIZE			/* search for candidate */
-	andi.	r6,r6,7*PTE_SIZE
+	addi	r6,r6,HPTE_SIZE			/* search for candidate */
+	andi.	r6,r6,7*HPTE_SIZE
 	stw	r6,next_slot@l(r4)
 	add	r4,r3,r6
-	LDPTE	r0,PTE_SIZE/2(r4)		/* get PTE second word */
+	LDPTE	r0,HPTE_SIZE/2(r4)		/* get PTE second word */
 	clrrwi	r0,r0,12
 	lis	r6,etext@h
 	ori	r6,r6,etext@l			/* get etext */
@@ -426,7 +473,7 @@ _GLOBAL(hash_page_patch_C)
 found_empty:
 	STPTE	r5,0(r4)
 found_slot:
-	STPTE	r8,PTE_SIZE/2(r4)
+	STPTE	r8,HPTE_SIZE/2(r4)
 
 #else /* CONFIG_SMP */
 /*
@@ -452,7 +499,7 @@ found_slot:
 	STPTE	r5,0(r4)
 	sync
 	TLBSYNC
-	STPTE	r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
+	STPTE	r8,HPTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
 	sync
 	SET_V(r5)
 	STPTE	r5,0(r4)	/* finally set V bit in PTE */
@@ -499,14 +546,18 @@ _GLOBAL(flush_hash_pages)
 	isync
 
 	/* First find a PTE in the range that has _PAGE_HASHPTE set */
+#ifndef CONFIG_PTE_64BIT
 	rlwimi	r5,r4,22,20,29
-1:	lwz	r0,0(r5)
+#else
+	rlwimi	r5,r4,23,20,28
+#endif
+1:	lwz	r0,PTE_FLAGS_OFFSET(r5)
 	cmpwi	cr1,r6,1
 	andi.	r0,r0,_PAGE_HASHPTE
 	bne	2f
 	ble	cr1,19f
 	addi	r4,r4,0x1000
-	addi	r5,r5,4
+	addi	r5,r5,PTE_SIZE
 	addi	r6,r6,-1
 	b	1b
 
@@ -545,7 +596,10 @@ _GLOBAL(flush_hash_pages)
 	 * already clear, we're done (for this pte).  If not,
 	 * clear it (atomically) and proceed.  -- paulus.
 	 */
-33:	lwarx	r8,0,r5			/* fetch the pte */
+#if (PTE_FLAGS_OFFSET != 0)
+	addi	r5,r5,PTE_FLAGS_OFFSET
+#endif
+33:	lwarx	r8,0,r5			/* fetch the pte flags word */
 	andi.	r0,r8,_PAGE_HASHPTE
 	beq	8f			/* done if HASHPTE is already clear */
 	rlwinm	r8,r8,0,31,29		/* clear HASHPTE bit */
@@ -562,8 +616,8 @@ _GLOBAL(flush_hash_patch_A)
 	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
 	li	r0,8			/* PTEs/group */
 	mtctr	r0
-	addi	r12,r8,-PTE_SIZE
-1:	LDPTEu	r0,PTE_SIZE(r12)	/* get next PTE */
+	addi	r12,r8,-HPTE_SIZE
+1:	LDPTEu	r0,HPTE_SIZE(r12)	/* get next PTE */
 	CMPPTE	0,r0,r11
 	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
 	beq+	3f
@@ -574,9 +628,9 @@ _GLOBAL(flush_hash_patch_A)
 _GLOBAL(flush_hash_patch_B)
 	xoris	r12,r8,Hash_msk>>16	/* compute secondary hash */
 	xori	r12,r12,(-PTEG_SIZE & 0xffff)
-	addi	r12,r12,-PTE_SIZE
+	addi	r12,r12,-HPTE_SIZE
 	mtctr	r0
-2:	LDPTEu	r0,PTE_SIZE(r12)
+2:	LDPTEu	r0,HPTE_SIZE(r12)
 	CMPPTE	0,r0,r11
 	bdnzf	2,2b
 	xori	r11,r11,PTE_H		/* clear H again */
@@ -590,7 +644,7 @@ _GLOBAL(flush_hash_patch_B)
 
 8:	ble	cr1,9f			/* if all ptes checked */
 81:	addi	r6,r6,-1
-	addi	r5,r5,4			/* advance to next pte */
+	addi	r5,r5,PTE_SIZE
 	addi	r4,r4,0x1000
 	lwz	r0,0(r5)		/* check next pte */
 	cmpwi	cr1,r6,1
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 8920eea..8d5b475 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -194,7 +194,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		unsigned long tprot = prot;
 
 		/* Make kernel text executable */
-		if (in_kernel_text(vaddr))
+		if (overlaps_kernel_text(vaddr, vaddr + step))
 			tprot &= ~HPTE_R_N;
 
 		hash = hpt_hash(va, shift, ssize);
@@ -348,6 +348,7 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,
 	return 0;
 }
 
+#ifdef CONFIG_HUGETLB_PAGE
 /* Scan for 16G memory blocks that have been set aside for huge pages
  * and reserve those blocks for 16G huge pages.
  */
@@ -381,10 +382,13 @@ static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
 	printk(KERN_INFO "Huge page(16GB) memory: "
 			"addr = 0x%lX size = 0x%lX pages = %d\n",
 			phys_addr, block_size, expected_pages);
-	lmb_reserve(phys_addr, block_size * expected_pages);
-	add_gpage(phys_addr, block_size, expected_pages);
+	if (phys_addr + (16 * GB) <= lmb_end_of_DRAM()) {
+		lmb_reserve(phys_addr, block_size * expected_pages);
+		add_gpage(phys_addr, block_size, expected_pages);
+	}
 	return 0;
 }
+#endif /* CONFIG_HUGETLB_PAGE */
 
 static void __init htab_init_page_sizes(void)
 {
@@ -539,7 +543,7 @@ static unsigned long __init htab_get_table_size(void)
 void create_section_mapping(unsigned long start, unsigned long end)
 {
 	BUG_ON(htab_bolt_mapping(start, end, __pa(start),
-				 PAGE_KERNEL, mmu_linear_psize,
+				 pgprot_val(PAGE_KERNEL), mmu_linear_psize,
 				 mmu_kernel_ssize));
 }
 
@@ -647,7 +651,7 @@ void __init htab_initialize(void)
 		mtspr(SPRN_SDR1, _SDR1);
 	}
 
-	prot = PAGE_KERNEL;
+	prot = pgprot_val(PAGE_KERNEL);
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index f1c2d55..a117024 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -128,29 +128,37 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 	return 0;
 }
 
-/* Base page size affects how we walk hugetlb page tables */
-#ifdef CONFIG_PPC_64K_PAGES
-#define hpmd_offset(pud, addr, h)	pmd_offset(pud, addr)
-#define hpmd_alloc(mm, pud, addr, h)	pmd_alloc(mm, pud, addr)
-#else
-static inline
-pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
+
+static pud_t *hpud_offset(pgd_t *pgd, unsigned long addr, struct hstate *hstate)
+{
+	if (huge_page_shift(hstate) < PUD_SHIFT)
+		return pud_offset(pgd, addr);
+	else
+		return (pud_t *) pgd;
+}
+static pud_t *hpud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long addr,
+			 struct hstate *hstate)
 {
-	if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
+	if (huge_page_shift(hstate) < PUD_SHIFT)
+		return pud_alloc(mm, pgd, addr);
+	else
+		return (pud_t *) pgd;
+}
+static pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
+{
+	if (huge_page_shift(hstate) < PMD_SHIFT)
 		return pmd_offset(pud, addr);
 	else
 		return (pmd_t *) pud;
 }
-static inline
-pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
-		  struct hstate *hstate)
+static pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
+			 struct hstate *hstate)
 {
-	if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
+	if (huge_page_shift(hstate) < PMD_SHIFT)
 		return pmd_alloc(mm, pud, addr);
 	else
 		return (pmd_t *) pud;
 }
-#endif
 
 /* Build list of addresses of gigantic pages.  This function is used in early
  * boot before the buddy or bootmem allocator is setup.
@@ -204,7 +212,7 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 
 	pg = pgd_offset(mm, addr);
 	if (!pgd_none(*pg)) {
-		pu = pud_offset(pg, addr);
+		pu = hpud_offset(pg, addr, hstate);
 		if (!pud_none(*pu)) {
 			pm = hpmd_offset(pu, addr, hstate);
 			if (!pmd_none(*pm))
@@ -233,7 +241,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 	addr &= hstate->mask;
 
 	pg = pgd_offset(mm, addr);
-	pu = pud_alloc(mm, pg, addr);
+	pu = hpud_alloc(mm, pg, addr, hstate);
 
 	if (pu) {
 		pm = hpmd_alloc(mm, pu, addr, hstate);
@@ -316,13 +324,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 	pud = pud_offset(pgd, addr);
 	do {
 		next = pud_addr_end(addr, end);
-#ifdef CONFIG_PPC_64K_PAGES
-		if (pud_none_or_clear_bad(pud))
-			continue;
-		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling,
-				       psize);
-#else
-		if (shift == PAGE_SHIFT_64K) {
+		if (shift < PMD_SHIFT) {
 			if (pud_none_or_clear_bad(pud))
 				continue;
 			hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
@@ -332,7 +334,6 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 				continue;
 			free_hugepte_range(tlb, (hugepd_t *)pud, psize);
 		}
-#endif
 	} while (pud++, addr = next, addr != end);
 
 	start &= PGDIR_MASK;
@@ -422,9 +423,15 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 		psize = get_slice_psize(tlb->mm, addr);
 		BUG_ON(!mmu_huge_psizes[psize]);
 		next = pgd_addr_end(addr, end);
-		if (pgd_none_or_clear_bad(pgd))
-			continue;
-		hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
+		if (mmu_psize_to_shift(psize) < PUD_SHIFT) {
+			if (pgd_none_or_clear_bad(pgd))
+				continue;
+			hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
+		} else {
+			if (pgd_none(*pgd))
+				continue;
+			free_hugepte_range(tlb, (hugepd_t *)pgd, psize);
+		}
 	} while (pgd++, addr = next, addr != end);
 }
 
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 036fe2f..3e6a654 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -228,8 +228,8 @@ int __meminit vmemmap_populate(struct page *start_page,
 			start, p, __pa(p));
 
 		mapped = htab_bolt_mapping(start, start + page_size, __pa(p),
-					   PAGE_KERNEL, mmu_vmemmap_psize,
-					   mmu_kernel_ssize);
+					   pgprot_val(PAGE_KERNEL),
+					   mmu_vmemmap_psize, mmu_kernel_ssize);
 		BUG_ON(mapped < 0);
 	}
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 1c93c25..b9e1a1d 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -75,11 +75,10 @@ static inline pte_t *virt_to_kpte(unsigned long vaddr)
 
 int page_is_ram(unsigned long pfn)
 {
-	unsigned long paddr = (pfn << PAGE_SHIFT);
-
 #ifndef CONFIG_PPC64	/* XXX for now */
-	return paddr < __pa(high_memory);
+	return pfn < max_pfn;
 #else
+	unsigned long paddr = (pfn << PAGE_SHIFT);
 	int i;
 	for (i=0; i < lmb.memory.cnt; i++) {
 		unsigned long base;
@@ -135,23 +134,6 @@ int arch_add_memory(int nid, u64 start, u64 size)
 
 	return __add_pages(zone, start_pfn, nr_pages);
 }
-
-#ifdef CONFIG_MEMORY_HOTREMOVE
-int remove_memory(u64 start, u64 size)
-{
-	unsigned long start_pfn, end_pfn;
-	int ret;
-
-	start_pfn = start >> PAGE_SHIFT;
-	end_pfn = start_pfn + (size >> PAGE_SHIFT);
-	ret = offline_pages(start_pfn, end_pfn, 120 * HZ);
-	if (ret)
-		goto out;
-	/* Arch-specific calls go here - next patch */
-out:
-	return ret;
-}
-#endif /* CONFIG_MEMORY_HOTREMOVE */
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
 /*
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index d9a1813..eb505ad 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -89,6 +89,48 @@ static int __cpuinit fake_numa_create_new_node(unsigned long end_pfn,
 	return 0;
 }
 
+/*
+ * get_active_region_work_fn - A helper function for get_node_active_region
+ *	Returns datax set to the start_pfn and end_pfn if they contain
+ *	the initial value of datax->start_pfn between them
+ * @start_pfn: start page(inclusive) of region to check
+ * @end_pfn: end page(exclusive) of region to check
+ * @datax: comes in with ->start_pfn set to value to search for and
+ *	goes out with active range if it contains it
+ * Returns 1 if search value is in range else 0
+ */
+static int __init get_active_region_work_fn(unsigned long start_pfn,
+					unsigned long end_pfn, void *datax)
+{
+	struct node_active_region *data;
+	data = (struct node_active_region *)datax;
+
+	if (start_pfn <= data->start_pfn && end_pfn > data->start_pfn) {
+		data->start_pfn = start_pfn;
+		data->end_pfn = end_pfn;
+		return 1;
+	}
+	return 0;
+
+}
+
+/*
+ * get_node_active_region - Return active region containing start_pfn
+ * Active range returned is empty if none found.
+ * @start_pfn: The page to return the region for.
+ * @node_ar: Returned set to the active region containing start_pfn
+ */
+static void __init get_node_active_region(unsigned long start_pfn,
+		       struct node_active_region *node_ar)
+{
+	int nid = early_pfn_to_nid(start_pfn);
+
+	node_ar->nid = nid;
+	node_ar->start_pfn = start_pfn;
+	node_ar->end_pfn = start_pfn;
+	work_with_active_regions(nid, get_active_region_work_fn, node_ar);
+}
+
 static void __cpuinit map_cpu_to_node(int cpu, int node)
 {
 	numa_cpu_lookup_table[cpu] = node;
@@ -150,6 +192,21 @@ static const int *of_get_associativity(struct device_node *dev)
 	return of_get_property(dev, "ibm,associativity", NULL);
 }
 
+/*
+ * Returns the property linux,drconf-usable-memory if
+ * it exists (the property exists only in kexec/kdump kernels,
+ * added by kexec-tools)
+ */
+static const u32 *of_get_usable_memory(struct device_node *memory)
+{
+	const u32 *prop;
+	u32 len;
+	prop = of_get_property(memory, "linux,drconf-usable-memory", &len);
+	if (!prop || len < sizeof(unsigned int))
+		return 0;
+	return prop;
+}
+
 /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa
  * info is found.
  */
@@ -471,12 +528,10 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
 	/*
 	 * We use lmb_end_of_DRAM() in here instead of memory_limit because
 	 * we've already adjusted it for the limit and it takes care of
-	 * having memory holes below the limit.
+	 * having memory holes below the limit.  Also, in the case of
+	 * iommu_is_off, memory_limit is not set but is implicitly enforced.
 	 */
 
-	if (! memory_limit)
-		return size;
-
 	if (start + size <= lmb_end_of_DRAM())
 		return size;
 
@@ -487,14 +542,29 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
 }
 
 /*
+ * Reads the counter for a given entry in
+ * linux,drconf-usable-memory property
+ */
+static inline int __init read_usm_ranges(const u32 **usm)
+{
+	/*
+	 * For each lmb in ibm,dynamic-memory a corresponding
+	 * entry in linux,drconf-usable-memory property contains
+	 * a counter followed by that many (base, size) duple.
+	 * read the counter from linux,drconf-usable-memory
+	 */
+	return read_n_cells(n_mem_size_cells, usm);
+}
+
+/*
  * Extract NUMA information from the ibm,dynamic-reconfiguration-memory
  * node.  This assumes n_mem_{addr,size}_cells have been set.
  */
 static void __init parse_drconf_memory(struct device_node *memory)
 {
-	const u32 *dm;
-	unsigned int n, rc;
-	unsigned long lmb_size, size;
+	const u32 *dm, *usm;
+	unsigned int n, rc, ranges, is_kexec_kdump = 0;
+	unsigned long lmb_size, base, size, sz;
 	int nid;
 	struct assoc_arrays aa;
 
@@ -510,6 +580,11 @@ static void __init parse_drconf_memory(struct device_node *memory)
 	if (rc)
 		return;
 
+	/* check if this is a kexec/kdump kernel */
+	usm = of_get_usable_memory(memory);
+	if (usm != NULL)
+		is_kexec_kdump = 1;
+
 	for (; n != 0; --n) {
 		struct of_drconf_cell drmem;
 
@@ -521,21 +596,31 @@ static void __init parse_drconf_memory(struct device_node *memory)
 		    || !(drmem.flags & DRCONF_MEM_ASSIGNED))
 			continue;
 
-		nid = of_drconf_to_nid_single(&drmem, &aa);
+		base = drmem.base_addr;
+		size = lmb_size;
+		ranges = 1;
 
-		fake_numa_create_new_node(
-				((drmem.base_addr + lmb_size) >> PAGE_SHIFT),
+		if (is_kexec_kdump) {
+			ranges = read_usm_ranges(&usm);
+			if (!ranges) /* there are no (base, size) duple */
+				continue;
+		}
+		do {
+			if (is_kexec_kdump) {
+				base = read_n_cells(n_mem_addr_cells, &usm);
+				size = read_n_cells(n_mem_size_cells, &usm);
+			}
+			nid = of_drconf_to_nid_single(&drmem, &aa);
+			fake_numa_create_new_node(
+				((base + size) >> PAGE_SHIFT),
 					   &nid);
-
-		node_set_online(nid);
-
-		size = numa_enforce_memory_limit(drmem.base_addr, lmb_size);
-		if (!size)
-			continue;
-
-		add_active_range(nid, drmem.base_addr >> PAGE_SHIFT,
-				 (drmem.base_addr >> PAGE_SHIFT)
-				 + (size >> PAGE_SHIFT));
+			node_set_online(nid);
+			sz = numa_enforce_memory_limit(base, size);
+			if (sz)
+				add_active_range(nid, base >> PAGE_SHIFT,
+						 (base >> PAGE_SHIFT)
+						 + (sz >> PAGE_SHIFT));
+		} while (--ranges);
 	}
 }
 
@@ -837,38 +922,53 @@ void __init do_init_bootmem(void)
 				  start_pfn, end_pfn);
 
 		free_bootmem_with_active_regions(nid, end_pfn);
+	}
 
-		/* Mark reserved regions on this node */
-		for (i = 0; i < lmb.reserved.cnt; i++) {
-			unsigned long physbase = lmb.reserved.region[i].base;
-			unsigned long size = lmb.reserved.region[i].size;
-			unsigned long start_paddr = start_pfn << PAGE_SHIFT;
-			unsigned long end_paddr = end_pfn << PAGE_SHIFT;
-
-			if (early_pfn_to_nid(physbase >> PAGE_SHIFT) != nid &&
-			    early_pfn_to_nid((physbase+size-1) >> PAGE_SHIFT) != nid)
-				continue;
-
-			if (physbase < end_paddr &&
-			    (physbase+size) > start_paddr) {
-				/* overlaps */
-				if (physbase < start_paddr) {
-					size -= start_paddr - physbase;
-					physbase = start_paddr;
-				}
-
-				if (size > end_paddr - physbase)
-					size = end_paddr - physbase;
-
-				dbg("reserve_bootmem %lx %lx\n", physbase,
-				    size);
-				reserve_bootmem_node(NODE_DATA(nid), physbase,
-						     size, BOOTMEM_DEFAULT);
-			}
+	/* Mark reserved regions */
+	for (i = 0; i < lmb.reserved.cnt; i++) {
+		unsigned long physbase = lmb.reserved.region[i].base;
+		unsigned long size = lmb.reserved.region[i].size;
+		unsigned long start_pfn = physbase >> PAGE_SHIFT;
+		unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+		struct node_active_region node_ar;
+
+		get_node_active_region(start_pfn, &node_ar);
+		while (start_pfn < end_pfn &&
+			node_ar.start_pfn < node_ar.end_pfn) {
+			unsigned long reserve_size = size;
+			/*
+			 * if reserved region extends past active region
+			 * then trim size to active region
+			 */
+			if (end_pfn > node_ar.end_pfn)
+				reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
+					- (start_pfn << PAGE_SHIFT);
+			dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
+				reserve_size, node_ar.nid);
+			reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
+						reserve_size, BOOTMEM_DEFAULT);
+			/*
+			 * if reserved region is contained in the active region
+			 * then done.
+			 */
+			if (end_pfn <= node_ar.end_pfn)
+				break;
+
+			/*
+			 * reserved region extends past the active region
+			 *   get next active region that contains this
+			 *   reserved region
+			 */
+			start_pfn = node_ar.end_pfn;
+			physbase = start_pfn << PAGE_SHIFT;
+			size = size - reserve_size;
+			get_node_active_region(start_pfn, &node_ar);
 		}
 
-		sparse_memory_present_with_active_regions(nid);
 	}
+
+	for_each_online_node(nid)
+		sparse_memory_present_with_active_regions(nid);
 }
 
 void __init paging_init(void)
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 2001abd..c31d6d2 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -73,7 +73,7 @@ extern unsigned long p_mapped_by_tlbcam(unsigned long pa);
 #endif /* HAVE_TLBCAM */
 
 #ifdef CONFIG_PTE_64BIT
-/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
+/* Some processors use an 8kB pgdir because they have 8-byte Linux PTEs. */
 #define PGDIR_ORDER	1
 #else
 #define PGDIR_ORDER	0
@@ -288,7 +288,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
 }
 
 /*
- * Map in all of physical memory starting at KERNELBASE.
+ * Map in a big chunk of physical memory starting at KERNELBASE.
  */
 void __init mapin_ram(void)
 {
diff --git a/arch/powerpc/mm/tlb_32.c b/arch/powerpc/mm/tlb_32.c
index eb4b512..f9a47fe 100644
--- a/arch/powerpc/mm/tlb_32.c
+++ b/arch/powerpc/mm/tlb_32.c
@@ -45,6 +45,7 @@ void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long addr)
 		flush_hash_pages(mm->context.id, addr, ptephys, 1);
 	}
 }
+EXPORT_SYMBOL(flush_hash_entry);
 
 /*
  * Called by ptep_set_access_flags, must flush on CPUs for which the
diff --git a/arch/powerpc/oprofile/cell/pr_util.h b/arch/powerpc/oprofile/cell/pr_util.h
index 22e4e8d..628009c 100644
--- a/arch/powerpc/oprofile/cell/pr_util.h
+++ b/arch/powerpc/oprofile/cell/pr_util.h
@@ -24,6 +24,11 @@
 #define SKIP_GENERIC_SYNC 0
 #define SYNC_START_ERROR -1
 #define DO_GENERIC_SYNC 1
+#define SPUS_PER_NODE   8
+#define DEFAULT_TIMER_EXPIRE  (HZ / 10)
+
+extern struct delayed_work spu_work;
+extern int spu_prof_running;
 
 struct spu_overlay_info {	/* map of sections within an SPU overlay */
 	unsigned int vma;	/* SPU virtual memory address from elf */
@@ -62,6 +67,14 @@ struct vma_to_fileoffset_map {	/* map of sections within an SPU program */
 
 };
 
+struct spu_buffer {
+	int last_guard_val;
+	int ctx_sw_seen;
+	unsigned long *buff;
+	unsigned int head, tail;
+};
+
+
 /* The three functions below are for maintaining and accessing
  * the vma-to-fileoffset map.
  */
diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c
index 380d7e2..dd499c3 100644
--- a/arch/powerpc/oprofile/cell/spu_profiler.c
+++ b/arch/powerpc/oprofile/cell/spu_profiler.c
@@ -23,12 +23,11 @@
 
 static u32 *samples;
 
-static int spu_prof_running;
+int spu_prof_running;
 static unsigned int profiling_interval;
 
 #define NUM_SPU_BITS_TRBUF 16
 #define SPUS_PER_TB_ENTRY   4
-#define SPUS_PER_NODE	     8
 
 #define SPU_PC_MASK	     0xFFFF
 
@@ -196,7 +195,7 @@ int start_spu_profiling(unsigned int cycles_reset)
 	pr_debug("timer resolution: %lu\n", TICK_NSEC);
 	kt = ktime_set(0, profiling_interval);
 	hrtimer_init(&timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	timer.expires = kt;
+	hrtimer_set_expires(&timer, kt);
 	timer.function = profile_spus;
 
 	/* Allocate arrays for collecting SPU PC samples */
@@ -208,6 +207,7 @@ int start_spu_profiling(unsigned int cycles_reset)
 
 	spu_prof_running = 1;
 	hrtimer_start(&timer, kt, HRTIMER_MODE_REL);
+	schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
 
 	return 0;
 }
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
index 2a9b4a0..2949126 100644
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ b/arch/powerpc/oprofile/cell/spu_task_sync.c
@@ -35,7 +35,102 @@ static DEFINE_SPINLOCK(buffer_lock);
 static DEFINE_SPINLOCK(cache_lock);
 static int num_spu_nodes;
 int spu_prof_num_nodes;
-int last_guard_val[MAX_NUMNODES * 8];
+
+struct spu_buffer spu_buff[MAX_NUMNODES * SPUS_PER_NODE];
+struct delayed_work spu_work;
+static unsigned max_spu_buff;
+
+static void spu_buff_add(unsigned long int value, int spu)
+{
+	/* spu buff is a circular buffer.  Add entries to the
+	 * head.  Head is the index to store the next value.
+	 * The buffer is full when there is one available entry
+	 * in the queue, i.e. head and tail can't be equal.
+	 * That way we can tell the difference between the
+	 * buffer being full versus empty.
+	 *
+	 *  ASSUPTION: the buffer_lock is held when this function
+	 *             is called to lock the buffer, head and tail.
+	 */
+	int full = 1;
+
+	if (spu_buff[spu].head >= spu_buff[spu].tail) {
+		if ((spu_buff[spu].head - spu_buff[spu].tail)
+		    <  (max_spu_buff - 1))
+			full = 0;
+
+	} else if (spu_buff[spu].tail > spu_buff[spu].head) {
+		if ((spu_buff[spu].tail - spu_buff[spu].head)
+		    > 1)
+			full = 0;
+	}
+
+	if (!full) {
+		spu_buff[spu].buff[spu_buff[spu].head] = value;
+		spu_buff[spu].head++;
+
+		if (spu_buff[spu].head >= max_spu_buff)
+			spu_buff[spu].head = 0;
+	} else {
+		/* From the user's perspective make the SPU buffer
+		 * size management/overflow look like we are using
+		 * per cpu buffers.  The user uses the same
+		 * per cpu parameter to adjust the SPU buffer size.
+		 * Increment the sample_lost_overflow to inform
+		 * the user the buffer size needs to be increased.
+		 */
+		oprofile_cpu_buffer_inc_smpl_lost();
+	}
+}
+
+/* This function copies the per SPU buffers to the
+ * OProfile kernel buffer.
+ */
+void sync_spu_buff(void)
+{
+	int spu;
+	unsigned long flags;
+	int curr_head;
+
+	for (spu = 0; spu < num_spu_nodes; spu++) {
+		/* In case there was an issue and the buffer didn't
+		 * get created skip it.
+		 */
+		if (spu_buff[spu].buff == NULL)
+			continue;
+
+		/* Hold the lock to make sure the head/tail
+		 * doesn't change while spu_buff_add() is
+		 * deciding if the buffer is full or not.
+		 * Being a little paranoid.
+		 */
+		spin_lock_irqsave(&buffer_lock, flags);
+		curr_head = spu_buff[spu].head;
+		spin_unlock_irqrestore(&buffer_lock, flags);
+
+		/* Transfer the current contents to the kernel buffer.
+		 * data can still be added to the head of the buffer.
+		 */
+		oprofile_put_buff(spu_buff[spu].buff,
+				  spu_buff[spu].tail,
+				  curr_head, max_spu_buff);
+
+		spin_lock_irqsave(&buffer_lock, flags);
+		spu_buff[spu].tail = curr_head;
+		spin_unlock_irqrestore(&buffer_lock, flags);
+	}
+
+}
+
+static void wq_sync_spu_buff(struct work_struct *work)
+{
+	/* move data from spu buffers to kernel buffer */
+	sync_spu_buff();
+
+	/* only reschedule if profiling is not done */
+	if (spu_prof_running)
+		schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
+}
 
 /* Container for caching information about an active SPU task. */
 struct cached_info {
@@ -305,14 +400,21 @@ static int process_context_switch(struct spu *spu, unsigned long objectId)
 
 	/* Record context info in event buffer */
 	spin_lock_irqsave(&buffer_lock, flags);
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(SPU_CTX_SWITCH_CODE);
-	add_event_entry(spu->number);
-	add_event_entry(spu->pid);
-	add_event_entry(spu->tgid);
-	add_event_entry(app_dcookie);
-	add_event_entry(spu_cookie);
-	add_event_entry(offset);
+	spu_buff_add(ESCAPE_CODE, spu->number);
+	spu_buff_add(SPU_CTX_SWITCH_CODE, spu->number);
+	spu_buff_add(spu->number, spu->number);
+	spu_buff_add(spu->pid, spu->number);
+	spu_buff_add(spu->tgid, spu->number);
+	spu_buff_add(app_dcookie, spu->number);
+	spu_buff_add(spu_cookie, spu->number);
+	spu_buff_add(offset, spu->number);
+
+	/* Set flag to indicate SPU PC data can now be written out.  If
+	 * the SPU program counter data is seen before an SPU context
+	 * record is seen, the postprocessing will fail.
+	 */
+	spu_buff[spu->number].ctx_sw_seen = 1;
+
 	spin_unlock_irqrestore(&buffer_lock, flags);
 	smp_wmb();	/* insure spu event buffer updates are written */
 			/* don't want entries intermingled... */
@@ -360,6 +462,47 @@ static int number_of_online_nodes(void)
         return nodes;
 }
 
+static int oprofile_spu_buff_create(void)
+{
+	int spu;
+
+	max_spu_buff = oprofile_get_cpu_buffer_size();
+
+	for (spu = 0; spu < num_spu_nodes; spu++) {
+		/* create circular buffers to store the data in.
+		 * use locks to manage accessing the buffers
+		 */
+		spu_buff[spu].head = 0;
+		spu_buff[spu].tail = 0;
+
+		/*
+		 * Create a buffer for each SPU.  Can't reliably
+		 * create a single buffer for all spus due to not
+		 * enough contiguous kernel memory.
+		 */
+
+		spu_buff[spu].buff = kzalloc((max_spu_buff
+					      * sizeof(unsigned long)),
+					     GFP_KERNEL);
+
+		if (!spu_buff[spu].buff) {
+			printk(KERN_ERR "SPU_PROF: "
+			       "%s, line %d:  oprofile_spu_buff_create "
+		       "failed to allocate spu buffer %d.\n",
+			       __func__, __LINE__, spu);
+
+			/* release the spu buffers that have been allocated */
+			while (spu >= 0) {
+				kfree(spu_buff[spu].buff);
+				spu_buff[spu].buff = 0;
+				spu--;
+			}
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
 /* The main purpose of this function is to synchronize
  * OProfile with SPUFS by registering to be notified of
  * SPU task switches.
@@ -372,20 +515,35 @@ static int number_of_online_nodes(void)
  */
 int spu_sync_start(void)
 {
-	int k;
+	int spu;
 	int ret = SKIP_GENERIC_SYNC;
 	int register_ret;
 	unsigned long flags = 0;
 
 	spu_prof_num_nodes = number_of_online_nodes();
 	num_spu_nodes = spu_prof_num_nodes * 8;
+	INIT_DELAYED_WORK(&spu_work, wq_sync_spu_buff);
+
+	/* create buffer for storing the SPU data to put in
+	 * the kernel buffer.
+	 */
+	ret = oprofile_spu_buff_create();
+	if (ret)
+		goto out;
 
 	spin_lock_irqsave(&buffer_lock, flags);
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(SPU_PROFILING_CODE);
-	add_event_entry(num_spu_nodes);
+	for (spu = 0; spu < num_spu_nodes; spu++) {
+		spu_buff_add(ESCAPE_CODE, spu);
+		spu_buff_add(SPU_PROFILING_CODE, spu);
+		spu_buff_add(num_spu_nodes, spu);
+	}
 	spin_unlock_irqrestore(&buffer_lock, flags);
 
+	for (spu = 0; spu < num_spu_nodes; spu++) {
+		spu_buff[spu].ctx_sw_seen = 0;
+		spu_buff[spu].last_guard_val = 0;
+	}
+
 	/* Register for SPU events  */
 	register_ret = spu_switch_event_register(&spu_active);
 	if (register_ret) {
@@ -393,8 +551,6 @@ int spu_sync_start(void)
 		goto out;
 	}
 
-	for (k = 0; k < (MAX_NUMNODES * 8); k++)
-		last_guard_val[k] = 0;
 	pr_debug("spu_sync_start -- running.\n");
 out:
 	return ret;
@@ -446,13 +602,20 @@ void spu_sync_buffer(int spu_num, unsigned int *samples,
 		 * use.	 We need to discard samples taken during the time
 		 * period which an overlay occurs (i.e., guard value changes).
 		 */
-		if (grd_val && grd_val != last_guard_val[spu_num]) {
-			last_guard_val[spu_num] = grd_val;
+		if (grd_val && grd_val != spu_buff[spu_num].last_guard_val) {
+			spu_buff[spu_num].last_guard_val = grd_val;
 			/* Drop the rest of the samples. */
 			break;
 		}
 
-		add_event_entry(file_offset | spu_num_shifted);
+		/* We must ensure that the SPU context switch has been written
+		 * out before samples for the SPU.  Otherwise, the SPU context
+		 * information is not available and the postprocessing of the
+		 * SPU PC will fail with no available anonymous map information.
+		 */
+		if (spu_buff[spu_num].ctx_sw_seen)
+			spu_buff_add((file_offset | spu_num_shifted),
+					 spu_num);
 	}
 	spin_unlock(&buffer_lock);
 out:
@@ -463,20 +626,41 @@ out:
 int spu_sync_stop(void)
 {
 	unsigned long flags = 0;
-	int ret = spu_switch_event_unregister(&spu_active);
-	if (ret) {
+	int ret;
+	int k;
+
+	ret = spu_switch_event_unregister(&spu_active);
+
+	if (ret)
 		printk(KERN_ERR "SPU_PROF: "
-			"%s, line %d: spu_switch_event_unregister returned %d\n",
-			__func__, __LINE__, ret);
-		goto out;
-	}
+		       "%s, line %d: spu_switch_event_unregister "	\
+		       "returned %d\n",
+		       __func__, __LINE__, ret);
+
+	/* flush any remaining data in the per SPU buffers */
+	sync_spu_buff();
 
 	spin_lock_irqsave(&cache_lock, flags);
 	ret = release_cached_info(RELEASE_ALL);
 	spin_unlock_irqrestore(&cache_lock, flags);
-out:
+
+	/* remove scheduled work queue item rather then waiting
+	 * for every queued entry to execute.  Then flush pending
+	 * system wide buffer to event buffer.
+	 */
+	cancel_delayed_work(&spu_work);
+
+	for (k = 0; k < num_spu_nodes; k++) {
+		spu_buff[k].ctx_sw_seen = 0;
+
+		/*
+		 * spu_sys_buff will be null if there was a problem
+		 * allocating the buffer.  Only delete if it exists.
+		 */
+		kfree(spu_buff[k].buff);
+		spu_buff[k].buff = 0;
+	}
 	pr_debug("spu_sync_stop -- done.\n");
 	return ret;
 }
 
-
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index fff6666..258fa44 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -229,7 +229,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 	 */
 	overlay_tbl_offset = vma_map_lookup(map, ovly_table_sym,
 					    aSpu, &grd_val);
-	if (overlay_tbl_offset < 0) {
+	if (overlay_tbl_offset > 0x10000000) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Error finding SPU overlay table\n",
 		       __func__, __LINE__);
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 5ff4de3..35141a8 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -404,7 +404,7 @@ set_count_mode(u32 kernel, u32 user)
 	}
 }
 
-static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl)
+static inline void enable_ctr(u32 cpu, u32 ctr, u32 *pm07_cntrl)
 {
 
 	pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE;
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 446a8bbb..3e3d91f 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -64,7 +64,7 @@ static int power4_reg_setup(struct op_counter_config *ctr,
 	return 0;
 }
 
-extern void ppc64_enable_pmcs(void);
+extern void ppc_enable_pmcs(void);
 
 /*
  * Older CPUs require the MMCRA sample bit to be always set, but newer 
@@ -91,7 +91,7 @@ static int power4_cpu_setup(struct op_counter_config *ctr)
 	unsigned int mmcr0 = mmcr0_val;
 	unsigned long mmcra = mmcra_val;
 
-	ppc64_enable_pmcs();
+	ppc_enable_pmcs();
 
 	/* set the freeze bit */
 	mmcr0 |= MMCR0_FC;
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index a9260e2..6573027 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -14,6 +14,15 @@
 #	help
 #	  This option enables support for the CPCI405 board.
 
+config ACADIA
+	bool "Acadia"
+	depends on 40x
+	default n
+	select PPC40x_SIMPLE
+	select 405EZ
+	help
+	  This option enables support for the AMCC 405EZ Acadia evaluation board.
+
 config EP405
 	bool "EP405/EP405PC"
 	depends on 40x
@@ -23,6 +32,14 @@ config EP405
 	help
 	  This option enables support for the EP405/EP405PC boards.
 
+config HCU4
+	bool "Hcu4"
+	depends on 40x
+	default y
+	select 405GPR
+	help
+	  This option enables support for the Nestal Maschinen HCU4 board.
+
 config KILAUEA
 	bool "Kilauea"
 	depends on 40x
@@ -93,6 +110,13 @@ config XILINX_VIRTEX_GENERIC_BOARD
 	  Most Virtex designs should use this unless it needs to do some
 	  special configuration at board probe time.
 
+config PPC40x_SIMPLE
+	bool "Simple PowerPC 40x board support"
+	depends on 40x
+	default n
+	help
+	  This option enables the simple PowerPC 40x platform support.
+
 # 40x specific CPU modules, selected based on the board above.
 config NP405H
 	bool
@@ -118,6 +142,12 @@ config 405EX
 	select IBM_NEW_EMAC_EMAC4
 	select IBM_NEW_EMAC_RGMII
 
+config 405EZ
+	bool
+	select IBM_NEW_EMAC_NO_FLOW_CTRL
+	select IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+	select IBM_NEW_EMAC_MAL_COMMON_ERR
+
 config 405GPR
 	bool
 
@@ -139,6 +169,14 @@ config STB03xxx
 	select IBM405_ERR77
 	select IBM405_ERR51
 
+config PPC4xx_GPIO
+	bool "PPC4xx GPIO support"
+	depends on 40x
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	help
+	  Enable gpiolib support for ppc40x based boards
+
 # 40x errata/workaround config symbols, selected by the CPU models above
 
 # All 405-based cores up until the 405GPR and 405EP have this errata.
diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile
index 5533a5c..9bab76a 100644
--- a/arch/powerpc/platforms/40x/Makefile
+++ b/arch/powerpc/platforms/40x/Makefile
@@ -1,5 +1,7 @@
 obj-$(CONFIG_KILAUEA)				+= kilauea.o
+obj-$(CONFIG_HCU4)				+= hcu4.o
 obj-$(CONFIG_MAKALU)				+= makalu.o
 obj-$(CONFIG_WALNUT)				+= walnut.o
 obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD)	+= virtex.o
 obj-$(CONFIG_EP405)				+= ep405.o
+obj-$(CONFIG_PPC40x_SIMPLE)		+= ppc40x_simple.o
diff --git a/arch/powerpc/platforms/40x/hcu4.c b/arch/powerpc/platforms/40x/hcu4.c
new file mode 100644
index 0000000..60b2afe
--- /dev/null
+++ b/arch/powerpc/platforms/40x/hcu4.c
@@ -0,0 +1,61 @@
+/*
+ * Architecture- / platform-specific boot-time initialization code for
+ * IBM PowerPC 4xx based boards. Adapted from original
+ * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
+ * <dan@net4x.com>.
+ *
+ * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 IBM Corporation
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+
+static __initdata struct of_device_id hcu4_of_bus[] = {
+	{ .compatible = "ibm,plb3", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init hcu4_device_probe(void)
+{
+	of_platform_bus_probe(NULL, hcu4_of_bus, NULL);
+	return 0;
+}
+machine_device_initcall(hcu4, hcu4_device_probe);
+
+static int __init hcu4_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "netstal,hcu4"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(hcu4) {
+	.name			= "HCU4",
+	.probe			= hcu4_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= uic_init_tree,
+	.get_irq		= uic_get_irq,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
new file mode 100644
index 0000000..4498a86
--- /dev/null
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -0,0 +1,80 @@
+/*
+ * Generic PowerPC 40x platform support
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * This implements simple platform support for PowerPC 44x chips.  This is
+ * mostly used for eval boards or other simple and "generic" 44x boards.  If
+ * your board has custom functions or hardware, then you will likely want to
+ * implement your own board.c file to accommodate it.
+ */
+
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+static __initdata struct of_device_id ppc40x_of_bus[] = {
+	{ .compatible = "ibm,plb3", },
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init ppc40x_device_probe(void)
+{
+	of_platform_bus_probe(NULL, ppc40x_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(ppc40x_simple, ppc40x_device_probe);
+
+/* This is the list of boards that can be supported by this simple
+ * platform code.  This does _not_ mean the boards are compatible,
+ * as they most certainly are not from a device tree perspective.
+ * However, their differences are handled by the device tree and the
+ * drivers and therefore they don't need custom board support files.
+ *
+ * Again, if your board needs to do things differently then create a
+ * board.c file for it rather than adding it to this list.
+ */
+static char *board[] __initdata = {
+	"amcc,acadia"
+};
+
+static int __init ppc40x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	int i = 0;
+
+	for (i = 0; i < ARRAY_SIZE(board); i++) {
+		if (of_flat_dt_is_compatible(root, board[i])) {
+			ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+define_machine(ppc40x_simple) {
+	.name = "PowerPC 40x Platform",
+	.probe = ppc40x_probe,
+	.progress = udbg_progress,
+	.init_IRQ = uic_init_tree,
+	.get_irq = uic_get_irq,
+	.restart = ppc4xx_reset_system,
+	.calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 249ba01..3496bc0 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -2,6 +2,7 @@ config BAMBOO
 	bool "Bamboo"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440EP
 	select PCI
 	help
@@ -30,6 +31,7 @@ config SEQUOIA
 	bool "Sequoia"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440EPX
 	help
 	  This option enables support for the AMCC PPC440EPX evaluation board.
@@ -38,6 +40,7 @@ config TAISHAN
 	bool "Taishan"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440GX
 	select PCI
 	help
@@ -48,6 +51,7 @@ config KATMAI
 	bool "Katmai"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440SPe
 	select PCI
 	select PPC4xx_PCI_EXPRESS
@@ -58,6 +62,7 @@ config RAINIER
 	bool "Rainier"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440GRX
 	select PCI
 	help
@@ -76,20 +81,48 @@ config WARP
 	  See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
 	  Telephony Developers" link for more information.
 
+config ARCHES
+	bool "Arches"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 460EX # Odd since it uses 460GT but the effects are the same
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the AMCC Dual PPC460GT evaluation board.
+
 config CANYONLANDS
 	bool "Canyonlands"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 460EX
 	select PCI
 	select PPC4xx_PCI_EXPRESS
+	select IBM_NEW_EMAC_RGMII
+	select IBM_NEW_EMAC_ZMII
 	help
 	  This option enables support for the AMCC PPC460EX evaluation board.
 
+config GLACIER
+	bool "Glacier"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 460EX # Odd since it uses 460GT but the effects are the same
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	select IBM_NEW_EMAC_RGMII
+	select IBM_NEW_EMAC_ZMII
+	help
+	  This option enables support for the AMCC PPC460GT evaluation board.
+
 config YOSEMITE
 	bool "Yosemite"
 	depends on 44x
 	default n
+	select PPC44x_SIMPLE
 	select 440EP
 	select PCI
 	help
@@ -127,6 +160,21 @@ config XILINX_VIRTEX440_GENERIC_BOARD
 	  Most Virtex 5 designs should use this unless it needs to do some
 	  special configuration at board probe time.
 
+config PPC44x_SIMPLE
+	bool "Simple PowerPC 44x board support"
+	depends on 44x
+	default n
+	help
+	  This option enables the simple PowerPC 44x platform support.
+
+config PPC4xx_GPIO
+	bool "PPC4xx GPIO support"
+	depends on 44x
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	help
+	  Enable gpiolib support for ppc440 based boards
+
 # 44x specific CPU modules, selected based on the board above.
 config 440EP
 	bool
@@ -170,8 +218,6 @@ config 460EX
 	bool
 	select PPC_FPU
 	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_RGMII
-	select IBM_NEW_EMAC_ZMII
 	select IBM_NEW_EMAC_TAH
 
 # 44x errata/workaround config symbols, selected by the CPU models above
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 8d0b1a1..6981331 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -1,13 +1,7 @@
 obj-$(CONFIG_44x)	:= misc_44x.o idle.o
+obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
 obj-$(CONFIG_EBONY)	+= ebony.o
-obj-$(CONFIG_TAISHAN)	+= taishan.o
-obj-$(CONFIG_BAMBOO)	+= bamboo.o
-obj-$(CONFIG_YOSEMITE)	+= bamboo.o
 obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
-obj-$(CONFIG_SEQUOIA)	+= sequoia.o
-obj-$(CONFIG_KATMAI)	+= katmai.o
-obj-$(CONFIG_RAINIER)	+= rainier.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_WARP)	+= warp-nand.o
-obj-$(CONFIG_CANYONLANDS) += canyonlands.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c
deleted file mode 100644
index cef169e..0000000
--- a/arch/powerpc/platforms/44x/bamboo.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Bamboo board specific routines
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- * Copyright 2004 MontaVista Software Inc.
- *
- * Rewritten and ported to the merged powerpc tree:
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id bamboo_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init bamboo_device_probe(void)
-{
-	of_platform_bus_probe(NULL, bamboo_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(bamboo, bamboo_device_probe);
-
-static int __init bamboo_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,bamboo"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(bamboo) {
-	.name 			= "Bamboo",
-	.probe 			= bamboo_probe,
-	.progress 		= udbg_progress,
-	.init_IRQ 		= uic_init_tree,
-	.get_irq 		= uic_get_irq,
-	.restart		= ppc4xx_reset_system,
-	.calibrate_decr 	= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
deleted file mode 100644
index 3949289..0000000
--- a/arch/powerpc/platforms/44x/canyonlands.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Canyonlands board specific routines
- *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * Based on the Katmai code by
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * Copyright 2007 IBM Corp.
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id canyonlands_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init canyonlands_device_probe(void)
-{
-	of_platform_bus_probe(NULL, canyonlands_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(canyonlands, canyonlands_device_probe);
-
-static int __init canyonlands_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,canyonlands"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(canyonlands) {
-	.name 				= "Canyonlands",
-	.probe 				= canyonlands_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c
deleted file mode 100644
index 44f4b3a..0000000
--- a/arch/powerpc/platforms/44x/katmai.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Katmai board specific routines
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * Copyright 2007 IBM Corp.
- *
- * Based on the Bamboo code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id katmai_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init katmai_device_probe(void)
-{
-	of_platform_bus_probe(NULL, katmai_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(katmai, katmai_device_probe);
-
-static int __init katmai_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,katmai"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(katmai) {
-	.name 				= "Katmai",
-	.probe 				= katmai_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
new file mode 100644
index 0000000..2967126
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -0,0 +1,88 @@
+/*
+ * Generic PowerPC 44x platform support
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * This implements simple platform support for PowerPC 44x chips.  This is
+ * mostly used for eval boards or other simple and "generic" 44x boards.  If
+ * your board has custom functions or hardware, then you will likely want to
+ * implement your own board.c file to accommodate it.
+ */
+
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+static __initdata struct of_device_id ppc44x_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init ppc44x_device_probe(void)
+{
+	of_platform_bus_probe(NULL, ppc44x_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(ppc44x_simple, ppc44x_device_probe);
+
+/* This is the list of boards that can be supported by this simple
+ * platform code.  This does _not_ mean the boards are compatible,
+ * as they most certainly are not from a device tree perspective.
+ * However, their differences are handled by the device tree and the
+ * drivers and therefore they don't need custom board support files.
+ *
+ * Again, if your board needs to do things differently then create a
+ * board.c file for it rather than adding it to this list.
+ */
+static char *board[] __initdata = {
+	"amcc,arches",
+	"amcc,bamboo",
+	"amcc,canyonlands",
+	"amcc,glacier",
+	"ibm,ebony",
+	"amcc,katmai",
+	"amcc,rainier",
+	"amcc,sequoia",
+	"amcc,taishan",
+	"amcc,yosemite"
+};
+
+static int __init ppc44x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	int i = 0;
+
+	for (i = 0; i < ARRAY_SIZE(board); i++) {
+		if (of_flat_dt_is_compatible(root, board[i])) {
+			ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+define_machine(ppc44x_simple) {
+	.name = "PowerPC 44x Platform",
+	.probe = ppc44x_probe,
+	.progress = udbg_progress,
+	.init_IRQ = uic_init_tree,
+	.get_irq = uic_get_irq,
+	.restart = ppc4xx_reset_system,
+	.calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c
deleted file mode 100644
index 4f1ff84..0000000
--- a/arch/powerpc/platforms/44x/rainier.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Rainier board specific routines
- *
- * Valentine Barshak <vbarshak@ru.mvista.com>
- * Copyright 2007 MontaVista Software Inc.
- *
- * Based on the Bamboo code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id rainier_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init rainier_device_probe(void)
-{
-	of_platform_bus_probe(NULL, rainier_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(rainier, rainier_device_probe);
-
-static int __init rainier_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,rainier"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(rainier) {
-	.name 				= "Rainier",
-	.probe 				= rainier_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c
deleted file mode 100644
index 49eb73d..0000000
--- a/arch/powerpc/platforms/44x/sequoia.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Sequoia board specific routines
- *
- * Valentine Barshak <vbarshak@ru.mvista.com>
- * Copyright 2007 MontaVista Software Inc.
- *
- * Based on the Bamboo code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id sequoia_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init sequoia_device_probe(void)
-{
-	of_platform_bus_probe(NULL, sequoia_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(sequoia, sequoia_device_probe);
-
-static int __init sequoia_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,sequoia"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(sequoia) {
-	.name 				= "Sequoia",
-	.probe 				= sequoia_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c
deleted file mode 100644
index 49c78b2..0000000
--- a/arch/powerpc/platforms/44x/taishan.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Taishan board specific routines based off ebony.c code
- * original copyrights below
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003-2005 Zultys Technologies
- *
- * Rewritten and ported to the merged powerpc tree:
- * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
- *
- * Modified from ebony.c for taishan:
- * Copyright 2007 Hugh Blemings <hugh@au.ibm.com>, IBM Corporation.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id taishan_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init taishan_device_probe(void)
-{
-	of_platform_bus_probe(NULL, taishan_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(taishan, taishan_device_probe);
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init taishan_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,taishan"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(taishan) {
-	.name			= "Taishan",
-	.probe			= taishan_probe,
-	.progress		= udbg_progress,
-	.init_IRQ		= uic_init_tree,
-	.get_irq		= uic_get_irq,
-	.restart		= ppc4xx_reset_system,
-	.calibrate_decr		= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index c62f893..326852c 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -3,6 +3,8 @@ config PPC_MPC512x
 	select FSL_SOC
 	select IPIC
 	select PPC_CLOCK
+	select PPC_PCI_CHOICE
+	select FSL_PCI if PCI
 
 config PPC_MPC5121
 	bool
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 5ebf693..441abc4 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -22,16 +22,26 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 
+#include <sysdev/fsl_pci.h>
+
 #include "mpc512x.h"
 #include "mpc5121_ads.h"
 
 static void __init mpc5121_ads_setup_arch(void)
 {
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
 	printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
 	/*
 	 * cpld regs are needed early
 	 */
 	mpc5121_ads_cpld_map();
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
+		mpc83xx_add_bridge(np);
+#endif
 }
 
 static void __init mpc5121_ads_init_IRQ(void)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 4d5fd1d..ae7c34f 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -90,7 +90,7 @@ mpc5200_setup_xlb_arbiter(void)
 	of_node_put(np);
 	if (!xlb) {
 		printk(KERN_ERR __FILE__ ": "
-			"Error mapping XLB in mpc52xx_setup_cpu().  "
+			"Error mapping XLB in mpc52xx_setup_cpu(). "
 			"Expect some abnormal behavior\n");
 		return;
 	}
@@ -99,11 +99,14 @@ mpc5200_setup_xlb_arbiter(void)
 	out_be32(&xlb->master_pri_enable, 0xff);
 	out_be32(&xlb->master_priority, 0x11111111);
 
-	/* Disable XLB pipelining
+	/*
+	 * Disable XLB pipelining
 	 * (cfr errate 292. We could do this only just before ATA PIO
 	 *  transaction and re-enable it afterwards ...)
+	 * Not needed on MPC5200B.
 	 */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
+	if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR)
+		out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
 
 	iounmap(xlb);
 }
@@ -216,7 +219,8 @@ mpc52xx_restart(char *cmd)
 		out_be32(&mpc52xx_wdt->count, 0x000000ff);
 		out_be32(&mpc52xx_wdt->mode, 0x00009004);
 	} else
-		printk("mpc52xx_restart: Can't access wdt. "
+		printk(KERN_ERR __FILE__ ": "
+			"mpc52xx_restart: Can't access wdt. "
 			"Restart impossible, system halted.\n");
 
 	while (1);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 5a382bb..b49a1852 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -265,8 +265,11 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 	/* Memory windows */
 	res = &hose->mem_resources[0];
 	if (res->flags) {
-		pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n",
-		         res->start, res->end, res->flags);
+		pr_debug("mem_resource[0] = "
+		         "{.start=%llx, .end=%llx, .flags=%llx}\n",
+		         (unsigned long long)res->start,
+			 (unsigned long long)res->end,
+			 (unsigned long long)res->flags);
 		out_be32(&pci_regs->iw0btar,
 		         MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
 		                  res->end - res->start + 1));
@@ -297,9 +300,11 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 		printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__);
 		return;
 	}
-	pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} "
+	pr_debug(".io_resource={.start=%llx,.end=%llx,.flags=%llx} "
 	         ".io_base_phys=0x%p\n",
-	         res->start, res->end, res->flags, (void*)hose->io_base_phys);
+	         (unsigned long long)res->start,
+		 (unsigned long long)res->end,
+		 (unsigned long long)res->flags, (void*)hose->io_base_phys);
 	out_be32(&pci_regs->iw2btar,
 	         MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys,
 	                                        res->start,
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 75eb1ed..30f008b 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -38,6 +38,14 @@ config EP8248E
 	  This board is also resold by Freescale as the QUICCStart
 	  MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
 
+config MGCOGE
+	bool "Keymile MGCOGE"
+	select 8272
+	select 8260
+	select FSL_SOC
+	help
+	  This enables support for the Keymile MGCOGE board.
+
 endif
 
 config PQ2ADS
diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile
index 6cd5cd5..d982793 100644
--- a/arch/powerpc/platforms/82xx/Makefile
+++ b/arch/powerpc/platforms/82xx/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_CPM2) += pq2.o
 obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
 obj-$(CONFIG_PQ2FADS) += pq2fads.o
 obj-$(CONFIG_EP8248E) += ep8248e.o
+obj-$(CONFIG_MGCOGE) += mgcoge.o
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index d5770fd..0eb6d7f6 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -137,7 +137,7 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 		bus->irq[i] = -1;
 
 	bus->name = "ep8248e-mdio-bitbang";
-	bus->dev = &ofdev->dev;
+	bus->parent = &ofdev->dev;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
 
 	return mdiobus_register(bus);
diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/mgcoge.c
new file mode 100644
index 0000000..c2af169
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/mgcoge.c
@@ -0,0 +1,129 @@
+/*
+ * Keymile mgcoge support
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * based on code from:
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/mpc8260.h>
+#include <asm/prom.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2.h"
+
+static void __init mgcoge_pic_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic");
+	if (!np) {
+		printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
+		return;
+	}
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+}
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static __initdata struct cpm_pin mgcoge_pins[] = {
+
+	/* SMC2 */
+	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	/* SCC4 */
+	{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3,  9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3,  8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{4, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{4, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) {
+		const struct cpm_pin *pin = &mgcoge_pins[i];
+		cpm2_set_pin(pin->port - 1, pin->pin, pin->flags);
+	}
+
+	cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
+	cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX);
+}
+
+static void __init mgcoge_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("mgcoge_setup_arch()", 0);
+
+	cpm2_reset();
+
+	/* When this is set, snooping CPM DMA from RAM causes
+	 * machine checks.  See erratum SIU18.
+	 */
+	clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP);
+
+	init_ioports();
+
+	if (ppc_md.progress)
+		ppc_md.progress("mgcoge_setup_arch(), finish", 0);
+}
+
+static  __initdata struct of_device_id of_bus_ids[] = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(mgcoge, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mgcoge_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "keymile,mgcoge");
+}
+
+define_machine(mgcoge)
+{
+	.name = "Keymile MGCOGE",
+	.probe = mgcoge_probe,
+	.setup_arch = mgcoge_setup_arch,
+	.init_IRQ = mgcoge_pic_init,
+	.get_irq = cpm2_get_irq,
+	.calibrate_decr = generic_calibrate_decr,
+	.restart = pq2_restart,
+	.progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 6159c5d..83c664a 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -19,7 +19,6 @@ config MPC831x_RDB
 config MPC832x_MDS
 	bool "Freescale MPC832x MDS"
 	select DEFAULT_UIMAGE
-	select QUICC_ENGINE
 	select PPC_MPC832x
 	help
 	  This option enables support for the MPC832x MDS evaluation board.
@@ -27,7 +26,6 @@ config MPC832x_MDS
 config MPC832x_RDB
 	bool "Freescale MPC832x RDB"
 	select DEFAULT_UIMAGE
-	select QUICC_ENGINE
 	select PPC_MPC832x
 	help
 	  This option enables support for the MPC8323 RDB board.
@@ -57,15 +55,12 @@ config MPC834x_ITX
 config MPC836x_MDS
 	bool "Freescale MPC836x MDS"
 	select DEFAULT_UIMAGE
-	select QUICC_ENGINE
 	help
 	  This option enables support for the MPC836x MDS Processor Board.
 
 config MPC836x_RDK
 	bool "Freescale/Logic MPC836x RDK"
 	select DEFAULT_UIMAGE
-	select QUICC_ENGINE
-	select QE_GPIO
 	select FSL_GTM
 	select FSL_LBC
 	help
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index be62de2..8bb13c8 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -85,8 +85,14 @@ static void __init mpc837x_mds_setup_arch(void)
 		ppc_md.progress("mpc837x_mds_setup_arch()", 0);
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") {
+		if (!of_device_is_available(np)) {
+			pr_warning("%s: disabled by the firmware.\n",
+				   np->full_name);
+			continue;
+		}
 		mpc83xx_add_bridge(np);
+	}
 #endif
 	mpc837xmds_usb_cfg();
 }
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 291675b..b79dc71 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -33,7 +33,6 @@ config MPC85xx_CDS
 config MPC85xx_MDS
 	bool "Freescale MPC85xx MDS"
 	select DEFAULT_UIMAGE
-	select QUICC_ENGINE
 	select PHYLIB
 	help
 	  This option enables support for the MPC85xx MDS board
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 8a3b117..81cee7b 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -193,7 +193,6 @@ static void __init ksi8560_setup_arch(void)
 static void ksi8560_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -215,9 +214,6 @@ static void ksi8560_show_cpuinfo(struct seq_file *m)
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index d17807a..21f0090 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -207,22 +207,17 @@ static void __init mpc85xx_ads_setup_arch(void)
 static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
-	seq_printf(m, "Machine\t\t: mpc85xx\n");
 	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 50d7ea8..aeb6a5b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -307,7 +307,6 @@ static void __init mpc85xx_cds_setup_arch(void)
 static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -320,9 +319,6 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index b9246ea..7ec77ce 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -136,7 +136,6 @@ static void __init sbc8548_setup_arch(void)
 static void sbc8548_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -149,9 +148,6 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 6509ade..472f254 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -156,7 +156,7 @@ static void __init init_ioports(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
-		struct cpm_pin *pin = &sbc8560_pins[i];
+		const struct cpm_pin *pin = &sbc8560_pins[i];
 		cpm2_set_pin(pin->port, pin->pin, pin->flags);
 	}
 
@@ -194,22 +194,17 @@ static void __init sbc8560_setup_arch(void)
 static void sbc8560_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Wind River\n");
-	seq_printf(m, "Machine\t\t: SBC8560\n");
 	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c
index 18499d7..0cca8f5 100644
--- a/arch/powerpc/platforms/85xx/stx_gp3.c
+++ b/arch/powerpc/platforms/85xx/stx_gp3.c
@@ -130,7 +130,6 @@ static void __init stx_gp3_setup_arch(void)
 static void stx_gp3_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -142,9 +141,6 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index d850880..2933a8e 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -138,7 +138,6 @@ static void __init tqm85xx_setup_arch(void)
 static void tqm85xx_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -150,9 +149,6 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m)
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 9355a52..77dd797 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -31,6 +31,13 @@ config MPC8610_HPCD
 	help
 	  This option enables support for the MPC8610 HPCD board.
 
+config GEF_SBC610
+	bool "GE Fanuc SBC610"
+	select DEFAULT_UIMAGE
+	select HAS_RAPIDIO
+	help
+	  This option enables support for GE Fanuc's SBC610.
+
 endif
 
 config MPC8641
@@ -39,7 +46,7 @@ config MPC8641
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
-	default y if MPC8641_HPCN || SBC8641D
+	default y if MPC8641_HPCN || SBC8641D || GEF_SBC610
 
 config MPC8610
 	bool
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 8fee37d..4a56ff6 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
 obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
 obj-$(CONFIG_MPC8610_HPCD)	+= mpc8610_hpcd.o
+obj-$(CONFIG_GEF_SBC610)	+= gef_sbc610.o gef_pic.o
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
new file mode 100644
index 0000000..50d0a2b
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -0,0 +1,258 @@
+/*
+ * Interrupt handling for GE Fanuc's FPGA based PIC
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/irq.h>
+
+#include "gef_pic.h"
+
+#define DEBUG
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
+#else
+#define DBG(fmt...) do { } while (0)
+#endif
+
+#define GEF_PIC_NUM_IRQS	32
+
+/* Interrupt Controller Interface Registers */
+#define GEF_PIC_INTR_STATUS	0x0000
+
+#define GEF_PIC_INTR_MASK(cpu)	(0x0010 + (0x4 * cpu))
+#define GEF_PIC_CPU0_INTR_MASK	GEF_PIC_INTR_MASK(0)
+#define GEF_PIC_CPU1_INTR_MASK	GEF_PIC_INTR_MASK(1)
+
+#define GEF_PIC_MCP_MASK(cpu)	(0x0018 + (0x4 * cpu))
+#define GEF_PIC_CPU0_MCP_MASK	GEF_PIC_MCP_MASK(0)
+#define GEF_PIC_CPU1_MCP_MASK	GEF_PIC_MCP_MASK(1)
+
+#define gef_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
+
+
+static DEFINE_SPINLOCK(gef_pic_lock);
+
+static void __iomem *gef_pic_irq_reg_base;
+static struct irq_host *gef_pic_irq_host;
+static int gef_pic_cascade_irq;
+
+/*
+ * Interrupt Controller Handling
+ *
+ * The interrupt controller handles interrupts for most on board interrupts,
+ * apart from PCI interrupts. For example on SBC610:
+ *
+ * 17:31 RO Reserved
+ * 16    RO PCI Express Doorbell 3 Status
+ * 15    RO PCI Express Doorbell 2 Status
+ * 14    RO PCI Express Doorbell 1 Status
+ * 13    RO PCI Express Doorbell 0 Status
+ * 12    RO Real Time Clock Interrupt Status
+ * 11    RO Temperature Interrupt Status
+ * 10    RO Temperature Critical Interrupt Status
+ * 9     RO Ethernet PHY1 Interrupt Status
+ * 8     RO Ethernet PHY3 Interrupt Status
+ * 7     RO PEX8548 Interrupt Status
+ * 6     RO Reserved
+ * 5     RO Watchdog 0 Interrupt Status
+ * 4     RO Watchdog 1 Interrupt Status
+ * 3     RO AXIS Message FIFO A Interrupt Status
+ * 2     RO AXIS Message FIFO B Interrupt Status
+ * 1     RO AXIS Message FIFO C Interrupt Status
+ * 0     RO AXIS Message FIFO D Interrupt Status
+ *
+ * Interrupts can be forwarded to one of two output lines. Nothing
+ * clever is done, so if the masks are incorrectly set, a single input
+ * interrupt could generate interrupts on both output lines!
+ *
+ * The dual lines are there to allow the chained interrupts to be easily
+ * passed into two different cores. We currently do not use this functionality
+ * in this driver.
+ *
+ * Controller can also be configured to generate Machine checks (MCP), again on
+ * two lines, to be attached to two different cores. It is suggested that these
+ * should be masked out.
+ */
+
+void gef_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq;
+
+	/*
+	 * See if we actually have an interrupt, call generic handling code if
+	 * we do.
+	 */
+	cascade_irq = gef_pic_get_irq();
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+
+}
+
+static void gef_pic_mask(unsigned int virq)
+{
+	unsigned long flags;
+	unsigned int hwirq;
+	u32 mask;
+
+	hwirq = gef_irq_to_hw(virq);
+
+	spin_lock_irqsave(&gef_pic_lock, flags);
+	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+	mask &= ~(1 << hwirq);
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
+	spin_unlock_irqrestore(&gef_pic_lock, flags);
+}
+
+static void gef_pic_mask_ack(unsigned int virq)
+{
+	/* Don't think we actually have to do anything to ack an interrupt,
+	 * we just need to clear down the devices interrupt and it will go away
+	 */
+	gef_pic_mask(virq);
+}
+
+static void gef_pic_unmask(unsigned int virq)
+{
+	unsigned long flags;
+	unsigned int hwirq;
+	u32 mask;
+
+	hwirq = gef_irq_to_hw(virq);
+
+	spin_lock_irqsave(&gef_pic_lock, flags);
+	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+	mask |= (1 << hwirq);
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
+	spin_unlock_irqrestore(&gef_pic_lock, flags);
+}
+
+static struct irq_chip gef_pic_chip = {
+	.typename	= "gefp",
+	.mask		= gef_pic_mask,
+	.mask_ack	= gef_pic_mask_ack,
+	.unmask		= gef_pic_unmask,
+};
+
+
+/* When an interrupt is being configured, this call allows some flexibilty
+ * in deciding which irq_chip structure is used
+ */
+static int gef_pic_host_map(struct irq_host *h, unsigned int virq,
+			  irq_hw_number_t hwirq)
+{
+	/* All interrupts are LEVEL sensitive */
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
+
+	return 0;
+}
+
+static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+			    u32 *intspec, unsigned int intsize,
+			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+
+	*out_hwirq = intspec[0];
+	if (intsize > 1)
+		*out_flags = intspec[1];
+	else
+		*out_flags = IRQ_TYPE_LEVEL_HIGH;
+
+	return 0;
+}
+
+static struct irq_host_ops gef_pic_host_ops = {
+	.map	= gef_pic_host_map,
+	.xlate	= gef_pic_host_xlate,
+};
+
+
+/*
+ * Initialisation of PIC, this should be called in BSP
+ */
+void __init gef_pic_init(struct device_node *np)
+{
+	unsigned long flags;
+
+	/* Map the devices registers into memory */
+	gef_pic_irq_reg_base = of_iomap(np, 0);
+
+	spin_lock_irqsave(&gef_pic_lock, flags);
+
+	/* Initialise everything as masked. */
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0);
+
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
+	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
+
+	spin_unlock_irqrestore(&gef_pic_lock, flags);
+
+	/* Map controller */
+	gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
+	if (gef_pic_cascade_irq == NO_IRQ) {
+		printk(KERN_ERR "SBC610: failed to map cascade interrupt");
+		return;
+	}
+
+	/* Setup an irq_host structure */
+	gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
+					  GEF_PIC_NUM_IRQS,
+					  &gef_pic_host_ops, NO_IRQ);
+	if (gef_pic_irq_host == NULL)
+		return;
+
+	/* Chain with parent controller */
+	set_irq_chained_handler(gef_pic_cascade_irq, gef_pic_cascade);
+}
+
+/*
+ * This is called when we receive an interrupt with apparently comes from this
+ * chip - check, returning the highest interrupt generated or return NO_IRQ
+ */
+unsigned int gef_pic_get_irq(void)
+{
+	u32 cause, mask, active;
+	unsigned int virq = NO_IRQ;
+	int hwirq;
+
+	cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
+
+	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+
+	active = cause & mask;
+
+	if (active) {
+		for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) {
+			if (active & (0x1 << hwirq))
+				break;
+		}
+		virq = irq_linear_revmap(gef_pic_irq_host,
+			(irq_hw_number_t)hwirq);
+	}
+
+	return virq;
+}
+
diff --git a/arch/powerpc/platforms/86xx/gef_pic.h b/arch/powerpc/platforms/86xx/gef_pic.h
new file mode 100644
index 0000000..6149916
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_pic.h
@@ -0,0 +1,11 @@
+#ifndef __GEF_PIC_H__
+#define __GEF_PIC_H__
+
+#include <linux/init.h>
+
+void gef_pic_cascade(unsigned int, struct irq_desc *);
+unsigned int gef_pic_get_irq(void);
+void gef_pic_init(struct device_node *);
+
+#endif /* __GEF_PIC_H__ */
+
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
new file mode 100644
index 0000000..fb371f5
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -0,0 +1,219 @@
+/*
+ * GE Fanuc SBC610 board support
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+#include "gef_pic.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
+#else
+#define DBG (fmt...) do { } while (0)
+#endif
+
+void __iomem *sbc610_regs;
+
+static void __init gef_sbc610_init_irq(void)
+{
+	struct device_node *cascade_node = NULL;
+
+	mpc86xx_init_irq();
+
+	/*
+	 * There is a simple interrupt handler in the main FPGA, this needs
+	 * to be cascaded into the MPIC
+	 */
+	cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
+	if (!cascade_node) {
+		printk(KERN_WARNING "SBC610: No FPGA PIC\n");
+		return;
+	}
+
+	gef_pic_init(cascade_node);
+	of_node_put(cascade_node);
+}
+
+static void __init gef_sbc610_setup_arch(void)
+{
+	struct device_node *regs;
+#ifdef CONFIG_PCI
+	struct device_node *np;
+
+	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
+		fsl_add_bridge(np, 1);
+	}
+#endif
+
+	printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
+
+#ifdef CONFIG_SMP
+	mpc86xx_smp_init();
+#endif
+
+	/* Remap basic board registers */
+	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
+	if (regs) {
+		sbc610_regs = of_iomap(regs, 0);
+		if (sbc610_regs == NULL)
+			printk(KERN_WARNING "Unable to map board registers\n");
+		of_node_put(regs);
+	}
+}
+
+/* Return the PCB revision */
+static unsigned int gef_sbc610_get_pcb_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc610_regs);
+	return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int gef_sbc610_get_board_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc610_regs);
+	return (reg >> 16) & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int gef_sbc610_get_fpga_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc610_regs);
+	return (reg >> 24) & 0xf;
+}
+
+static void gef_sbc610_show_cpuinfo(struct seq_file *m)
+{
+	uint svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+
+	seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
+		('A' + gef_sbc610_get_board_rev() - 1));
+	seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev());
+
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+}
+
+static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
+
+	/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
+	pci_read_config_dword(pdev, 0xe0, &val);
+	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
+
+	/* System clock is 48-MHz Oscillator and EHCI Enabled. */
+	pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+	gef_sbc610_nec_fixup);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ *
+ * This function is called to determine whether the BSP is compatible with the
+ * supplied device-tree, which is assumed to be the correct one for the actual
+ * board. It is expected thati, in the future, a kernel may support multiple
+ * boards.
+ */
+static int __init gef_sbc610_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "gef,sbc610"))
+		return 1;
+
+	return 0;
+}
+
+static long __init mpc86xx_time_init(void)
+{
+	unsigned int temp;
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	temp = mfspr(SPRN_HID0);
+	temp |= HID0_TBEN;
+	mtspr(SPRN_HID0, temp);
+	asm volatile("isync");
+
+	return 0;
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	printk(KERN_DEBUG "Probe platform devices\n");
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(gef_sbc610, declare_of_platform_devices);
+
+define_machine(gef_sbc610) {
+	.name			= "GE Fanuc SBC610",
+	.probe			= gef_sbc610_probe,
+	.setup_arch		= gef_sbc610_setup_arch,
+	.init_IRQ		= gef_sbc610_init_irq,
+	.show_cpuinfo		= gef_sbc610_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.time_init		= mpc86xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 5eedb71..e8d54ac 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -238,7 +238,6 @@ static void __init mpc86xx_hpcd_setup_arch(void)
         }
 #endif
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
-	preallocate_diu_videomemory();
 	diu_ops.get_pixel_format	= mpc8610hpcd_get_pixel_format;
 	diu_ops.set_gamma_table		= mpc8610hpcd_set_gamma_table;
 	diu_ops.set_monitor_port	= mpc8610hpcd_set_monitor_port;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index f712d9c..27e0e68 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -101,21 +101,11 @@ mpc86xx_hpcn_setup_arch(void)
 static void
 mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
 {
-	struct device_node *root;
-	uint memsize = total_memory;
-	const char *model = "";
 	uint svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
 
-	root = of_find_node_by_path("/");
-	if (root)
-		model = of_get_property(root, "model", NULL);
-	seq_printf(m, "Machine\t\t: %s\n", model);
-	of_node_put(root);
-
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 00e6fad..5fd7ed4 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -63,21 +63,11 @@ sbc8641_setup_arch(void)
 static void
 sbc8641_show_cpuinfo(struct seq_file *m)
 {
-	struct device_node *root;
-	uint memsize = total_memory;
-	const char *model = "";
 	uint svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Wind River Systems\n");
 
-	root = of_find_node_by_path("/");
-	if (root)
-		model = of_get_property(root, "model", NULL);
-	seq_printf(m, "Machine\t\t: %s\n", model);
-	of_node_put(root);
-
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 71d7562..48a920a 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -49,6 +49,12 @@ config PPC_ADDER875
 	  This enables support for the Analogue & Micro Adder 875
 	  board.
 
+config PPC_MGSUVD
+	bool "MGSUVD"
+	select CPM1
+	help
+	  This enables support for the Keymile MGSUVD board.
+
 endchoice
 
 menu "Freescale Ethernet driver platform-specific options"
diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile
index 7b71d9c..bdbfd749 100644
--- a/arch/powerpc/platforms/8xx/Makefile
+++ b/arch/powerpc/platforms/8xx/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_MPC885ADS)   += mpc885ads_setup.o
 obj-$(CONFIG_MPC86XADS)   += mpc86xads_setup.o
 obj-$(CONFIG_PPC_EP88XC)  += ep88xc.o
 obj-$(CONFIG_PPC_ADDER875) += adder875.o
+obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o
diff --git a/arch/powerpc/platforms/8xx/mgsuvd.c b/arch/powerpc/platforms/8xx/mgsuvd.c
new file mode 100644
index 0000000..ca3cb07
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mgsuvd.c
@@ -0,0 +1,92 @@
+/*
+ *
+ * Platform setup for the Keymile mgsuvd board
+ *
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright 2008 DENX Software Engineering GmbH
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/processor.h>
+#include <asm/cpm1.h>
+#include <asm/prom.h>
+#include <asm/fs_pd.h>
+
+#include "mpc8xx.h"
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static __initdata struct cpm_pin mgsuvd_pins[] = {
+	/* SMC1 */
+	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* SCC3 */
+	{CPM_PORTA, 10, CPM_PIN_INPUT},
+	{CPM_PORTA, 11, CPM_PIN_INPUT},
+	{CPM_PORTA, 3, CPM_PIN_INPUT},
+	{CPM_PORTA, 2, CPM_PIN_INPUT},
+	{CPM_PORTC, 13, CPM_PIN_INPUT},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mgsuvd_pins); i++) {
+		struct cpm_pin *pin = &mgsuvd_pins[i];
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	setbits16(&mpc8xx_immr->im_ioport.iop_pcso, 0x300);
+	cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_RX);
+	cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_TX);
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+}
+
+static void __init mgsuvd_setup_arch(void)
+{
+	cpm_reset();
+	init_ioports();
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+	{ .compatible = "simple-bus" },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+machine_device_initcall(mgsuvd, declare_of_platform_devices);
+
+static int __init mgsuvd_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "keymile,mgsuvd");
+}
+
+define_machine(mgsuvd) {
+	.name           = "MGSUVD",
+	.probe          = mgsuvd_probe,
+	.setup_arch     = mgsuvd_setup_arch,
+	.init_IRQ       = mpc8xx_pics_init,
+	.get_irq        = mpc8xx_get_irq,
+	.restart        = mpc8xx_restart,
+	.calibrate_decr = mpc8xx_calibrate_decr,
+	.set_rtc_time   = mpc8xx_set_rtc_time,
+	.get_rtc_time   = mpc8xx_get_rtc_time,
+};
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 4c900ef..47e956c 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -239,7 +239,8 @@ config TAU_AVERAGE
 	  If in doubt, say N here.
 
 config QUICC_ENGINE
-	bool
+	bool "Freescale QUICC Engine (QE) Support"
+	depends on FSL_SOC
 	select PPC_LIB_RHEAP
 	select CRC32
 	help
@@ -248,6 +249,15 @@ config QUICC_ENGINE
 	  Selecting this option means that you wish to build a kernel
 	  for a machine with a QE coprocessor.
 
+config QE_GPIO
+	bool "QE GPIO support"
+	depends on QUICC_ENGINE
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  QE GPIOs.
+
 config CPM2
 	bool "Enable support for the CPM2 (Communications Processor Module)"
 	depends on MPC85xx || 8260
@@ -293,4 +303,13 @@ config OF_RTC
 
 source "arch/powerpc/sysdev/bestcomm/Kconfig"
 
+config MPC8xxx_GPIO
+	bool "MPC8xxx GPIO support"
+	depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  MPC831x/834x/837x/8572/8610 GPIOs.
+
 endmenu
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 7f65127..548efa5 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -50,6 +50,7 @@ config 44x
 	select PPC_UDBG_16550
 	select 4xx_SOC
 	select PPC_PCI_CHOICE
+	select PHYS_64BIT
 
 config E200
 	bool "Freescale e200"
@@ -128,18 +129,19 @@ config FSL_EMB_PERFMON
 
 config PTE_64BIT
 	bool
-	depends on 44x || E500
-	default y if 44x
-	default y if E500 && PHYS_64BIT
+	depends on 44x || E500 || PPC_86xx
+	default y if PHYS_64BIT
 
 config PHYS_64BIT
-	bool 'Large physical address support' if E500
-	depends on 44x || E500
-	select RESOURCES_64BIT
-	default y if 44x
+	bool 'Large physical address support' if E500 || PPC_86xx
+	depends on (44x || E500 || PPC_86xx) && !PPC_83xx && !PPC_82xx
 	---help---
 	  This option enables kernel support for larger than 32-bit physical
-	  addresses.  This features is not be available on all e500 cores.
+	  addresses.  This feature may not be available on all cores.
+
+	  If you have more than 3.5GB of RAM or so, you also need to enable
+	  SWIOTLB under Kernel Options for this to work.  The actual number
+	  is platform-dependent.
 
 	  If in doubt, say N here.
 
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index e06420a..ef92e71 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -556,11 +556,11 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev)
 	 * node's iommu. We -might- do something smarter later though it may
 	 * never be necessary
 	 */
-	iommu = cell_iommu_for_node(archdata->numa_node);
+	iommu = cell_iommu_for_node(dev_to_node(dev));
 	if (iommu == NULL || list_empty(&iommu->windows)) {
 		printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n",
 		       archdata->of_node ? archdata->of_node->full_name : "?",
-		       archdata->numa_node);
+		       dev_to_node(dev));
 		return NULL;
 	}
 	window = list_entry(iommu->windows.next, struct iommu_window, list);
@@ -577,7 +577,7 @@ static void *dma_fixed_alloc_coherent(struct device *dev, size_t size,
 		return iommu_alloc_coherent(dev, cell_get_iommu_table(dev),
 					    size, dma_handle,
 					    device_to_mask(dev), flag,
-					    dev->archdata.numa_node);
+					    dev_to_node(dev));
 	else
 		return dma_direct_ops.alloc_coherent(dev, size, dma_handle,
 						     flag);
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 2a14b05..665af1c 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -21,6 +21,7 @@
 #include <asm/machdep.h>
 #include <asm/rtas.h>
 #include <asm/cell-regs.h>
+#include <asm/kdump.h>
 
 #include "ras.h"
 
@@ -111,9 +112,8 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order)
 	int ret = -ENOMEM;
 	unsigned long addr;
 
-#ifdef CONFIG_CRASH_DUMP
-	rtas_call(ptcal_stop_tok, 1, 1, NULL, nid);
-#endif
+	if (__kdump_flag)
+		rtas_call(ptcal_stop_tok, 1, 1, NULL, nid);
 
 	area = kmalloc(sizeof(*area), GFP_KERNEL);
 	if (!area)
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index efb3964..c0d86e1 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -54,8 +54,8 @@
 #endif
 
 /*
- * The primary thread of each non-boot processor is recorded here before
- * smp init.
+ * The Primary thread of each non-boot processor was started from the OF client
+ * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
  */
 static cpumask_t of_spin_map;
 
@@ -208,11 +208,7 @@ void __init smp_init_cell(void)
 	/* Mark threads which are still spinning in hold loops. */
 	if (cpu_has_feature(CPU_FTR_SMT)) {
 		for_each_present_cpu(i) {
-			if (i % 2 == 0)
-				/*
-				 * Even-numbered logical cpus correspond to
-				 * primary threads.
-				 */
+			if (cpu_thread_in_core(i) == 0)
 				cpu_set(i, of_spin_map);
 		}
 	} else {
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 010a51f..b73c369 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -548,6 +548,11 @@ spufs_regs_read(struct file *file, char __user *buffer,
 	int ret;
 	struct spu_context *ctx = file->private_data;
 
+	/* pre-check for file position: if we'd return EOF, there's no point
+	 * causing a deschedule */
+	if (*pos >= sizeof(ctx->csa.lscsa->gprs))
+		return 0;
+
 	ret = spu_acquire_saved(ctx);
 	if (ret)
 		return ret;
@@ -2426,38 +2431,49 @@ static inline int spufs_switch_log_avail(struct spu_context *ctx)
 static int spufs_switch_log_open(struct inode *inode, struct file *file)
 {
 	struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
+	int rc;
+
+	rc = spu_acquire(ctx);
+	if (rc)
+		return rc;
 
-	/*
-	 * We (ab-)use the mapping_lock here because it serves the similar
-	 * purpose for synchronizing open/close elsewhere.  Maybe it should
-	 * be renamed eventually.
-	 */
-	mutex_lock(&ctx->mapping_lock);
 	if (ctx->switch_log) {
-		spin_lock(&ctx->switch_log->lock);
-		ctx->switch_log->head = 0;
-		ctx->switch_log->tail = 0;
-		spin_unlock(&ctx->switch_log->lock);
-	} else {
-		/*
-		 * We allocate the switch log data structures on first open.
-		 * They will never be free because we assume a context will
-		 * be traced until it goes away.
-		 */
-		ctx->switch_log = kzalloc(sizeof(struct switch_log) +
-			SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry),
-			GFP_KERNEL);
-		if (!ctx->switch_log)
-			goto out;
-		spin_lock_init(&ctx->switch_log->lock);
-		init_waitqueue_head(&ctx->switch_log->wait);
+		rc = -EBUSY;
+		goto out;
 	}
-	mutex_unlock(&ctx->mapping_lock);
+
+	ctx->switch_log = kmalloc(sizeof(struct switch_log) +
+		SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry),
+		GFP_KERNEL);
+
+	if (!ctx->switch_log) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	ctx->switch_log->head = ctx->switch_log->tail = 0;
+	init_waitqueue_head(&ctx->switch_log->wait);
+	rc = 0;
+
+out:
+	spu_release(ctx);
+	return rc;
+}
+
+static int spufs_switch_log_release(struct inode *inode, struct file *file)
+{
+	struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
+	int rc;
+
+	rc = spu_acquire(ctx);
+	if (rc)
+		return rc;
+
+	kfree(ctx->switch_log);
+	ctx->switch_log = NULL;
+	spu_release(ctx);
 
 	return 0;
- out:
-	mutex_unlock(&ctx->mapping_lock);
-	return -ENOMEM;
 }
 
 static int switch_log_sprint(struct spu_context *ctx, char *tbuf, int n)
@@ -2485,42 +2501,54 @@ static ssize_t spufs_switch_log_read(struct file *file, char __user *buf,
 	if (!buf || len < 0)
 		return -EINVAL;
 
+	error = spu_acquire(ctx);
+	if (error)
+		return error;
+
 	while (cnt < len) {
 		char tbuf[128];
 		int width;
 
-		if (file->f_flags & O_NONBLOCK) {
-			if (spufs_switch_log_used(ctx) <= 0)
-				return cnt ? cnt : -EAGAIN;
-		} else {
-			/* Wait for data in buffer */
-			error = wait_event_interruptible(ctx->switch_log->wait,
-					spufs_switch_log_used(ctx) > 0);
-			if (error)
+		if (spufs_switch_log_used(ctx) == 0) {
+			if (cnt > 0) {
+				/* If there's data ready to go, we can
+				 * just return straight away */
+				break;
+
+			} else if (file->f_flags & O_NONBLOCK) {
+				error = -EAGAIN;
 				break;
-		}
 
-		spin_lock(&ctx->switch_log->lock);
-		if (ctx->switch_log->head == ctx->switch_log->tail) {
-			/* multiple readers race? */
-			spin_unlock(&ctx->switch_log->lock);
-			continue;
+			} else {
+				/* spufs_wait will drop the mutex and
+				 * re-acquire, but since we're in read(), the
+				 * file cannot be _released (and so
+				 * ctx->switch_log is stable).
+				 */
+				error = spufs_wait(ctx->switch_log->wait,
+						spufs_switch_log_used(ctx) > 0);
+
+				/* On error, spufs_wait returns without the
+				 * state mutex held */
+				if (error)
+					return error;
+
+				/* We may have had entries read from underneath
+				 * us while we dropped the mutex in spufs_wait,
+				 * so re-check */
+				if (spufs_switch_log_used(ctx) == 0)
+					continue;
+			}
 		}
 
 		width = switch_log_sprint(ctx, tbuf, sizeof(tbuf));
-		if (width < len) {
+		if (width < len)
 			ctx->switch_log->tail =
 				(ctx->switch_log->tail + 1) %
 				 SWITCH_LOG_BUFSIZE;
-		}
-
-		spin_unlock(&ctx->switch_log->lock);
-
-		/*
-		 * If the record is greater than space available return
-		 * partial buffer (so far)
-		 */
-		if (width >= len)
+		else
+			/* If the record is greater than space available return
+			 * partial buffer (so far) */
 			break;
 
 		error = copy_to_user(buf + cnt, tbuf, width);
@@ -2529,6 +2557,8 @@ static ssize_t spufs_switch_log_read(struct file *file, char __user *buf,
 		cnt += width;
 	}
 
+	spu_release(ctx);
+
 	return cnt == 0 ? error : cnt;
 }
 
@@ -2537,29 +2567,41 @@ static unsigned int spufs_switch_log_poll(struct file *file, poll_table *wait)
 	struct inode *inode = file->f_path.dentry->d_inode;
 	struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
 	unsigned int mask = 0;
+	int rc;
 
 	poll_wait(file, &ctx->switch_log->wait, wait);
 
+	rc = spu_acquire(ctx);
+	if (rc)
+		return rc;
+
 	if (spufs_switch_log_used(ctx) > 0)
 		mask |= POLLIN;
 
+	spu_release(ctx);
+
 	return mask;
 }
 
 static const struct file_operations spufs_switch_log_fops = {
-	.owner	= THIS_MODULE,
-	.open	= spufs_switch_log_open,
-	.read	= spufs_switch_log_read,
-	.poll	= spufs_switch_log_poll,
+	.owner		= THIS_MODULE,
+	.open		= spufs_switch_log_open,
+	.read		= spufs_switch_log_read,
+	.poll		= spufs_switch_log_poll,
+	.release	= spufs_switch_log_release,
 };
 
+/**
+ * Log a context switch event to a switch log reader.
+ *
+ * Must be called with ctx->state_mutex held.
+ */
 void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx,
 		u32 type, u32 val)
 {
 	if (!ctx->switch_log)
 		return;
 
-	spin_lock(&ctx->switch_log->lock);
 	if (spufs_switch_log_avail(ctx) > 1) {
 		struct switch_log_entry *p;
 
@@ -2573,7 +2615,6 @@ void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx,
 		ctx->switch_log->head =
 			(ctx->switch_log->head + 1) % SWITCH_LOG_BUFSIZE;
 	}
-	spin_unlock(&ctx->switch_log->lock);
 
 	wake_up(&ctx->switch_log->wait);
 }
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 690ca7b..cb85d23 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -298,8 +298,8 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags,
 
 	d_instantiate(dentry, inode);
 	dget(dentry);
-	dir->i_nlink++;
-	dentry->d_inode->i_nlink++;
+	inc_nlink(dir);
+	inc_nlink(dentry->d_inode);
 	goto out;
 
 out_free_ctx:
@@ -496,6 +496,8 @@ spufs_create_context(struct inode *inode, struct dentry *dentry,
 	ret = spufs_context_open(dget(dentry), mntget(mnt));
 	if (ret < 0) {
 		WARN_ON(spufs_rmdir(inode, dentry));
+		if (affinity)
+			mutex_unlock(&gang->aff_mutex);
 		mutex_unlock(&inode->i_mutex);
 		spu_forget(SPUFS_I(dentry->d_inode)->i_ctx);
 		goto out;
@@ -538,8 +540,8 @@ spufs_mkgang(struct inode *dir, struct dentry *dentry, int mode)
 	inode->i_fop = &simple_dir_operations;
 
 	d_instantiate(dentry, inode);
-	dir->i_nlink++;
-	dentry->d_inode->i_nlink++;
+	inc_nlink(dir);
+	inc_nlink(dentry->d_inode);
 	return ret;
 
 out_iput:
@@ -659,7 +661,7 @@ enum {
 	Opt_uid, Opt_gid, Opt_mode, Opt_debug, Opt_err,
 };
 
-static match_table_t spufs_tokens = {
+static const match_table_t spufs_tokens = {
 	{ Opt_uid,   "uid=%d" },
 	{ Opt_gid,   "gid=%d" },
 	{ Opt_mode,  "mode=%o" },
@@ -755,6 +757,7 @@ spufs_create_root(struct super_block *sb, void *data)
 	inode->i_op = &simple_dir_inode_operations;
 	inode->i_fop = &simple_dir_operations;
 	SPUFS_I(inode)->i_ctx = NULL;
+	inc_nlink(inode);
 
 	ret = -EINVAL;
 	if (!spufs_parse_options(sb, data, inode))
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index c9bb7cf..c58bd36 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -249,6 +249,7 @@ static int spu_run_fini(struct spu_context *ctx, u32 *npc,
 
 	spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
 	clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags);
+	spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, *status);
 	spu_release(ctx);
 
 	if (signal_pending(current))
@@ -417,8 +418,6 @@ long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event)
 	ret = spu_run_fini(ctx, npc, &status);
 	spu_yield(ctx);
 
-	spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, status);
-
 	if ((status & SPU_STATUS_STOPPED_BY_STOP) &&
 	    (((status >> SPU_STOP_STATUS_SHIFT) & 0x3f00) == 0x2100))
 		ctx->stats.libassist++;
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 67595bc..2ad914c 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -312,6 +312,15 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff,
 	 */
 	node = cpu_to_node(raw_smp_processor_id());
 	for (n = 0; n < MAX_NUMNODES; n++, node++) {
+		/*
+		 * "available_spus" counts how many spus are not potentially
+		 * going to be used by other affinity gangs whose reference
+		 * context is already in place. Although this code seeks to
+		 * avoid having affinity gangs with a summed amount of
+		 * contexts bigger than the amount of spus in the node,
+		 * this may happen sporadically. In this case, available_spus
+		 * becomes negative, which is harmless.
+		 */
 		int available_spus;
 
 		node = (node < MAX_NUMNODES) ? node : 0;
@@ -321,12 +330,10 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff,
 		available_spus = 0;
 		mutex_lock(&cbe_spu_info[node].list_mutex);
 		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
-			if (spu->ctx && spu->ctx->gang
-					&& spu->ctx->aff_offset == 0)
-				available_spus -=
-					(spu->ctx->gang->contexts - 1);
-			else
-				available_spus++;
+			if (spu->ctx && spu->ctx->gang && !spu->ctx->aff_offset
+					&& spu->ctx->gang->aff_ref_spu)
+				available_spus -= spu->ctx->gang->contexts;
+			available_spus++;
 		}
 		if (available_spus < ctx->gang->contexts) {
 			mutex_unlock(&cbe_spu_info[node].list_mutex);
@@ -437,6 +444,11 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
 		atomic_dec(&cbe_spu_info[spu->node].reserved_spus);
 
 	if (ctx->gang)
+		/*
+		 * If ctx->gang->aff_sched_count is positive, SPU affinity is
+		 * being considered in this gang. Using atomic_dec_if_positive
+		 * allow us to skip an explicit check for affinity in this gang
+		 */
 		atomic_dec_if_positive(&ctx->gang->aff_sched_count);
 
 	spu_switch_notify(spu, NULL);
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 8ae8ef9..15c62d3 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -65,7 +65,6 @@ enum {
 };
 
 struct switch_log {
-	spinlock_t		lock;
 	wait_queue_head_t	wait;
 	unsigned long		head;
 	unsigned long		tail;
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 92d20e9..d0b1f3f 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -40,6 +40,7 @@ static DECLARE_WAIT_QUEUE_HEAD(sputrace_wait);
 static ktime_t sputrace_start;
 static unsigned long sputrace_head, sputrace_tail;
 static struct sputrace *sputrace_log;
+static int sputrace_logging;
 
 static int sputrace_used(void)
 {
@@ -79,6 +80,11 @@ static ssize_t sputrace_read(struct file *file, char __user *buf,
 		char tbuf[128];
 		int width;
 
+		/* If we have data ready to return, don't block waiting
+		 * for more */
+		if (cnt > 0 && sputrace_used() == 0)
+			break;
+
 		error = wait_event_interruptible(sputrace_wait,
 						 sputrace_used() > 0);
 		if (error)
@@ -109,24 +115,49 @@ static ssize_t sputrace_read(struct file *file, char __user *buf,
 
 static int sputrace_open(struct inode *inode, struct file *file)
 {
+	int rc;
+
 	spin_lock(&sputrace_lock);
+	if (sputrace_logging) {
+		rc = -EBUSY;
+		goto out;
+	}
+
+	sputrace_logging = 1;
 	sputrace_head = sputrace_tail = 0;
 	sputrace_start = ktime_get();
+	rc = 0;
+
+out:
 	spin_unlock(&sputrace_lock);
+	return rc;
+}
 
+static int sputrace_release(struct inode *inode, struct file *file)
+{
+	spin_lock(&sputrace_lock);
+	sputrace_logging = 0;
+	spin_unlock(&sputrace_lock);
 	return 0;
 }
 
 static const struct file_operations sputrace_fops = {
-	.owner	= THIS_MODULE,
-	.open	= sputrace_open,
-	.read	= sputrace_read,
+	.owner   = THIS_MODULE,
+	.open    = sputrace_open,
+	.read    = sputrace_read,
+	.release = sputrace_release,
 };
 
 static void sputrace_log_item(const char *name, struct spu_context *ctx,
 		struct spu *spu)
 {
 	spin_lock(&sputrace_lock);
+
+	if (!sputrace_logging) {
+		spin_unlock(&sputrace_lock);
+		return;
+	}
+
 	if (sputrace_avail() > 1) {
 		struct sputrace *t = sputrace_log + sputrace_head;
 
@@ -232,6 +263,7 @@ static void __exit sputrace_exit(void)
 
 	remove_proc_entry("sputrace", NULL);
 	kfree(sputrace_log);
+	marker_synchronize_unregister();
 }
 
 module_init(sputrace_init);
diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c
index 49c8776..c23617c 100644
--- a/arch/powerpc/platforms/cell/spufs/syscalls.c
+++ b/arch/powerpc/platforms/cell/spufs/syscalls.c
@@ -69,9 +69,9 @@ static long do_spu_create(const char __user *pathname, unsigned int flags,
 	if (!IS_ERR(tmp)) {
 		struct nameidata nd;
 
-		ret = path_lookup(tmp, LOOKUP_PARENT|
-				LOOKUP_OPEN|LOOKUP_CREATE, &nd);
+		ret = path_lookup(tmp, LOOKUP_PARENT, &nd);
 		if (!ret) {
+			nd.flags |= LOOKUP_OPEN | LOOKUP_CREATE;
 			ret = spufs_create(&nd, flags, mode, neighbor);
 			path_put(&nd.path);
 		}
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 768c262..d3cde6b 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -260,13 +260,13 @@ chrp_find_bridges(void)
 				dev->full_name);
 			continue;
 		}
-		hose->first_busno = bus_range[0];
+		hose->first_busno = hose->self_busno = bus_range[0];
 		hose->last_busno = bus_range[1];
 
 		model = of_get_property(dev, "model", NULL);
 		if (model == NULL)
 			model = "<none>";
-		if (of_device_is_compatible(dev, "IBM,python")) {
+		if (strncmp(model, "IBM, Python", 11) == 0) {
 			setup_python(hose, dev);
 		} else if (is_mot
 			   || strncmp(model, "Motorola, Grackle", 17) == 0) {
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 1ba7ce5..272d79a 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -17,7 +17,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/major.h>
 #include <linux/interrupt.h>
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
index 96d1e4b..054dfe5 100644
--- a/arch/powerpc/platforms/chrp/time.c
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -94,12 +94,12 @@ int chrp_set_rtc_time(struct rtc_time *tmarg)
 	chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
 
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BIN_TO_BCD(tm.tm_sec);
-		BIN_TO_BCD(tm.tm_min);
-		BIN_TO_BCD(tm.tm_hour);
-		BIN_TO_BCD(tm.tm_mon);
-		BIN_TO_BCD(tm.tm_mday);
-		BIN_TO_BCD(tm.tm_year);
+		tm.tm_sec = bin2bcd(tm.tm_sec);
+		tm.tm_min = bin2bcd(tm.tm_min);
+		tm.tm_hour = bin2bcd(tm.tm_hour);
+		tm.tm_mon = bin2bcd(tm.tm_mon);
+		tm.tm_mday = bin2bcd(tm.tm_mday);
+		tm.tm_year = bin2bcd(tm.tm_year);
 	}
 	chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS);
 	chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES);
@@ -136,12 +136,12 @@ void chrp_get_rtc_time(struct rtc_time *tm)
 	} while (sec != chrp_cmos_clock_read(RTC_SECONDS));
 
 	if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 	}
 	if (year < 70)
 		year += 100;
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
index d0b25b8..32ba0fa0 100644
--- a/arch/powerpc/platforms/embedded6xx/c2k.c
+++ b/arch/powerpc/platforms/embedded6xx/c2k.c
@@ -116,10 +116,7 @@ static void c2k_restart(char *cmd)
 
 void c2k_show_cpuinfo(struct seq_file *m)
 {
-	uint memsize = total_memory;
-
 	seq_printf(m, "Vendor\t\t: GEFanuc\n");
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 	seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
 }
 
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index 84e2d78..7a2ba39 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -164,7 +164,6 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
 {
 	seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
-	seq_printf(m, "machine\t\t: MPC7448hpc2\n");
 }
 
 void mpc7448_hpc2_restart(char *cmd)
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
index 5a19b9a..4c485e9 100644
--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -119,10 +119,7 @@ static void prpmc2800_restart(char *cmd)
 
 void prpmc2800_show_cpuinfo(struct seq_file *m)
 {
-	uint memsize = total_memory;
-
 	seq_printf(m, "Vendor\t\t: Motorola\n");
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 	seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING);
 }
 
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index ef74a07..8c61996 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -219,11 +219,21 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev)
 	int i;
 	u8 *dummy;
 	struct pci_bus *bus = dev->bus;
+	resource_size_t end = 0;
+
+	for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) {
+		unsigned long flags = pci_resource_flags(dev, i);
+		if ((flags & (IORESOURCE_MEM|IORESOURCE_PREFETCH)) == IORESOURCE_MEM)
+			end = pci_resource_end(dev, i);
+	}
 
 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
 		if ((bus->resource[i]) &&
 			(bus->resource[i]->flags & IORESOURCE_MEM)) {
-			dummy = ioremap(bus->resource[i]->end - 3, 0x4);
+			if (bus->resource[i]->end == end)
+				dummy = ioremap(bus->resource[i]->start, 0x4);
+			else
+				dummy = ioremap(bus->resource[i]->end - 3, 0x4);
 			if (dummy) {
 				in_8(dummy);
 				iounmap(dummy);
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 8ff330d..2f58152 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -38,12 +38,13 @@
 
 	.globl system_reset_iSeries
 system_reset_iSeries:
+	bl	.relative_toc
 	mfspr	r13,SPRN_SPRG3		/* Get alpaca address */
-	LOAD_REG_IMMEDIATE(r23, alpaca)
+	LOAD_REG_ADDR(r23, alpaca)
 	li	r0,ALPACA_SIZE
 	sub	r23,r13,r23
 	divdu	r23,r23,r0		/* r23 has cpu number */
-	LOAD_REG_IMMEDIATE(r13, paca)
+	LOAD_REG_ADDR(r13, paca)
 	mulli	r0,r23,PACA_SIZE
 	add	r13,r13,r0
 	mtspr	SPRN_SPRG3,r13		/* Save it away for the future */
@@ -60,14 +61,14 @@ system_reset_iSeries:
 	mtspr	SPRN_CTRLT,r4
 
 /* Spin on __secondary_hold_spinloop until it is updated by the boot cpu. */
-/* In the UP case we'll yeild() later, and we will not access the paca anyway */
+/* In the UP case we'll yield() later, and we will not access the paca anyway */
 #ifdef CONFIG_SMP
 1:
 	HMT_LOW
-	LOAD_REG_IMMEDIATE(r23, __secondary_hold_spinloop)
+	LOAD_REG_ADDR(r23, __secondary_hold_spinloop)
 	ld	r23,0(r23)
 	sync
-	LOAD_REG_IMMEDIATE(r3,current_set)
+	LOAD_REG_ADDR(r3,current_set)
 	sldi	r28,r24,3		/* get current_set[cpu#] */
 	ldx	r3,r3,r28
 	addi	r1,r3,THREAD_SIZE
@@ -90,7 +91,7 @@ system_reset_iSeries:
 	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor
 					 * should start */
 	sync
-	LOAD_REG_IMMEDIATE(r3,current_set)
+	LOAD_REG_ADDR(r3,current_set)
 	sldi	r28,r24,3		/* get current_set[cpu#] */
 	ldx	r3,r3,r28
 	addi	r1,r3,THREAD_SIZE
@@ -255,8 +256,8 @@ hardware_interrupt_iSeries_masked:
 
 _INIT_STATIC(__start_initialization_iSeries)
 	/* Clear out the BSS */
-	LOAD_REG_IMMEDIATE(r11,__bss_stop)
-	LOAD_REG_IMMEDIATE(r8,__bss_start)
+	LOAD_REG_ADDR(r11,__bss_stop)
+	LOAD_REG_ADDR(r8,__bss_start)
 	sub	r11,r11,r8		/* bss size			*/
 	addi	r11,r11,7		/* round up to an even double word */
 	rldicl. r11,r11,61,3		/* shift right by 3		*/
@@ -267,15 +268,11 @@ _INIT_STATIC(__start_initialization_iSeries)
 3:	stdu	r0,8(r8)
 	bdnz	3b
 4:
-	LOAD_REG_IMMEDIATE(r1,init_thread_union)
+	LOAD_REG_ADDR(r1,init_thread_union)
 	addi	r1,r1,THREAD_SIZE
 	li	r0,0
 	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
 
-	LOAD_REG_IMMEDIATE(r2,__toc_start)
-	addi	r2,r2,0x4000
-	addi	r2,r2,0x4000
-
 	bl	.iSeries_early_setup
 	bl	.early_setup
 
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 731d7b1..3689c24 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -722,13 +722,13 @@ static int mf_set_rtc(struct rtc_time *tm)
 	day = tm->tm_mday;
 	mon = tm->tm_mon + 1;
 
-	BIN_TO_BCD(sec);
-	BIN_TO_BCD(min);
-	BIN_TO_BCD(hour);
-	BIN_TO_BCD(mon);
-	BIN_TO_BCD(day);
-	BIN_TO_BCD(y1);
-	BIN_TO_BCD(y2);
+	sec = bin2bcd(sec);
+	min = bin2bcd(min);
+	hour = bin2bcd(hour);
+	mon = bin2bcd(mon);
+	day = bin2bcd(day);
+	y1 = bin2bcd(y1);
+	y2 = bin2bcd(y2);
 
 	memset(ce_time, 0, sizeof(ce_time));
 	ce_time[3] = 0x41;
@@ -777,12 +777,12 @@ static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm)
 		u8 day = ce_msg[10];
 		u8 mon = ce_msg[11];
 
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 
 		if (year <= 69)
 			year += 100;
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 3647147..d4c61c3 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -23,7 +23,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/string.h>
 #include <linux/delay.h>
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index 53bca13..eac569d 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -68,12 +68,12 @@ void maple_get_rtc_time(struct rtc_time *tm)
 
 	if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY)
 	    || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(tm->tm_sec);
-		BCD_TO_BIN(tm->tm_min);
-		BCD_TO_BIN(tm->tm_hour);
-		BCD_TO_BIN(tm->tm_mday);
-		BCD_TO_BIN(tm->tm_mon);
-		BCD_TO_BIN(tm->tm_year);
+		tm->tm_sec = bcd2bin(tm->tm_sec);
+		tm->tm_min = bcd2bin(tm->tm_min);
+		tm->tm_hour = bcd2bin(tm->tm_hour);
+		tm->tm_mday = bcd2bin(tm->tm_mday);
+		tm->tm_mon = bcd2bin(tm->tm_mon);
+		tm->tm_year = bcd2bin(tm->tm_year);
 	  }
 	if ((tm->tm_year + 1900) < 1970)
 		tm->tm_year += 100;
@@ -104,12 +104,12 @@ int maple_set_rtc_time(struct rtc_time *tm)
 	year = tm->tm_year;
 
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BIN_TO_BCD(sec);
-		BIN_TO_BCD(min);
-		BIN_TO_BCD(hour);
-		BIN_TO_BCD(mon);
-		BIN_TO_BCD(mday);
-		BIN_TO_BCD(year);
+		sec = bin2bcd(sec);
+		min = bin2bcd(min);
+		hour = bin2bcd(hour);
+		mon = bin2bcd(mon);
+		mday = bin2bcd(mday);
+		year = bin2bcd(year);
 	}
 	maple_clock_write(sec, RTC_SECONDS);
 	maple_clock_write(min, RTC_MINUTES);
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index ab69554..75cc165 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -230,7 +230,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	if (!priv)
 		goto out;
 
-	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+	new_bus = mdiobus_alloc();
 
 	if (!new_bus)
 		goto out_free_priv;
@@ -272,7 +272,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	prop = of_get_property(np, "mdio-pin", NULL);
 	priv->mdio_pin = *prop;
 
-	new_bus->dev = dev;
+	new_bus->parent = dev;
 	dev_set_drvdata(dev, new_bus);
 
 	err = mdiobus_register(new_bus);
@@ -306,7 +306,7 @@ static int gpio_mdio_remove(struct of_device *dev)
 
 	kfree(bus->priv);
 	bus->priv = NULL;
-	kfree(bus);
+	mdiobus_free(bus);
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 5169ecc..e6c0040 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2677,7 +2677,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
 	macio_chips[i].of_node	= node;
 	macio_chips[i].type	= type;
 	macio_chips[i].base	= base;
-	macio_chips[i].flags	= MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
+	macio_chips[i].flags	= MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON;
 	macio_chips[i].name	= macio_names[type];
 	revp = of_get_property(node, "revision-id", NULL);
 	if (revp)
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 88ccf3a..82c14d2 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -33,7 +33,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/string.h>
 #include <linux/delay.h>
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 4ae3d00..40f72c2 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -787,7 +787,7 @@ static void __devinit smp_core99_kick_cpu(int nr)
 {
 	unsigned int save_vector;
 	unsigned long target, flags;
-	unsigned int *vector = (unsigned int *)(KERNELBASE+0x100);
+	unsigned int *vector = (unsigned int *)(PAGE_OFFSET+0x100);
 
 	if (nr < 0 || nr > 3)
 		return;
@@ -801,7 +801,7 @@ static void __devinit smp_core99_kick_cpu(int nr)
 	save_vector = *vector;
 
 	/* Setup fake reset vector that does
-	 *   b __secondary_start_pmac_0 + nr*8 - KERNELBASE
+	 *   b __secondary_start_pmac_0 + nr*8
 	 */
 	target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
 	patch_branch(vector, target, BRANCH_SET_LINK);
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index bbbefd6..59eb840 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -93,11 +93,14 @@ static void to_rtc_time(unsigned long now, struct rtc_time *tm)
 }
 #endif
 
+#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) || \
+    defined(CONFIG_PMAC_SMU)
 static unsigned long from_rtc_time(struct rtc_time *tm)
 {
 	return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
 		      tm->tm_hour, tm->tm_min, tm->tm_sec);
 }
+#endif
 
 #ifdef CONFIG_ADB_CUDA
 static unsigned long cuda_get_time(void)
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 280ee88..a789bf58c 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -762,7 +762,7 @@ int ps3_system_bus_device_register(struct ps3_system_bus_device *dev)
 	};
 
 	dev->core.archdata.of_node = NULL;
-	dev->core.archdata.numa_node = 0;
+	set_dev_node(&dev->core, 0);
 
 	pr_debug("%s:%d add %s\n", __func__, __LINE__, dev->core.bus_id);
 
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index 38fe32a..5cd4d27 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -121,7 +121,7 @@ static long cmm_alloc_pages(long nr)
 			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
 								       __GFP_NORETRY | __GFP_NOMEMALLOC);
 			if (!npa) {
-				pr_info("%s: Can not allocate new page list\n", __FUNCTION__);
+				pr_info("%s: Can not allocate new page list\n", __func__);
 				free_page(addr);
 				break;
 			}
@@ -138,7 +138,7 @@ static long cmm_alloc_pages(long nr)
 		}
 
 		if ((rc = plpar_page_set_loaned(__pa(addr)))) {
-			pr_err("%s: Can not set page to loaned. rc=%ld\n", __FUNCTION__, rc);
+			pr_err("%s: Can not set page to loaned. rc=%ld\n", __func__, rc);
 			spin_unlock(&cmm_lock);
 			free_page(addr);
 			break;
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 8c1ca47..0ad56ff 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -41,7 +41,7 @@ static inline const char * pcid_name (struct pci_dev *pdev)
 	return "";
 }
 
-#ifdef DEBUG
+#if 0
 static void print_device_node_tree(struct pci_dn *pdn, int dent)
 {
 	int i;
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index a1a368d..a623ad2 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -21,7 +21,13 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
 	struct zone *zone;
 	int ret;
 
-	start_pfn = base >> PFN_SECTION_SHIFT;
+	start_pfn = base >> PAGE_SHIFT;
+
+	if (!pfn_valid(start_pfn)) {
+		lmb_remove(base, lmb_size);
+		return 0;
+	}
+
 	zone = page_zone(pfn_to_page(start_pfn));
 
 	/*
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index a8c4466..d56491d 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -44,6 +44,7 @@
 #include <asm/tce.h>
 #include <asm/ppc-pci.h>
 #include <asm/udbg.h>
+#include <asm/kdump.h>
 
 #include "plpar_wrappers.h"
 
@@ -291,9 +292,8 @@ static void iommu_table_setparms(struct pci_controller *phb,
 
 	tbl->it_base = (unsigned long)__va(*basep);
 
-#ifndef CONFIG_CRASH_DUMP
-	memset((void *)tbl->it_base, 0, *sizep);
-#endif
+	if (!__kdump_flag)
+		memset((void *)tbl->it_base, 0, *sizep);
 
 	tbl->it_busno = phb->bus->number;
 
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 7637bd3..c591a25 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -466,11 +466,11 @@ static int do_update_property(char *buf, size_t bufsize)
 		else
 			action = PSERIES_DRCONF_MEM_REMOVE;
 
-		blocking_notifier_call_chain(&pSeries_reconfig_chain,
-					     action, value);
+		rc = blocking_notifier_call_chain(&pSeries_reconfig_chain,
+						  action, value);
 	}
 
-	return 0;
+	return rc;
 }
 
 /**
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index c9ffd8c..f4e55be 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -295,19 +295,29 @@ static ssize_t rtas_log_read(struct file * file, char __user * buf,
 	if (!tmp)
 		return -ENOMEM;
 
-
 	spin_lock_irqsave(&rtasd_log_lock, s);
 	/* if it's 0, then we know we got the last one (the one in NVRAM) */
-	if (rtas_log_size == 0 && logging_enabled)
-		nvram_clear_error_log();
-	spin_unlock_irqrestore(&rtasd_log_lock, s);
+	while (rtas_log_size == 0) {
+		if (file->f_flags & O_NONBLOCK) {
+			spin_unlock_irqrestore(&rtasd_log_lock, s);
+			error = -EAGAIN;
+			goto out;
+		}
 
+		if (!logging_enabled) {
+			spin_unlock_irqrestore(&rtasd_log_lock, s);
+			error = -ENODATA;
+			goto out;
+		}
+		nvram_clear_error_log();
 
-	error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
-	if (error)
-		goto out;
+		spin_unlock_irqrestore(&rtasd_log_lock, s);
+		error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
+		if (error)
+			goto out;
+		spin_lock_irqsave(&rtasd_log_lock, s);
+	}
 
-	spin_lock_irqsave(&rtasd_log_lock, s);
 	offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK);
 	memcpy(tmp, &rtas_log_buf[offset], count);
 
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 7b01d67..ec34170 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -25,7 +25,6 @@
 #include <linux/unistd.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/major.h>
 #include <linux/interrupt.h>
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 9d8f8c8..1a231c3 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -37,7 +37,6 @@
 #include <asm/paca.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
-#include "xics.h"
 #include <asm/cputable.h>
 #include <asm/firmware.h>
 #include <asm/system.h>
@@ -49,11 +48,12 @@
 
 #include "plpar_wrappers.h"
 #include "pseries.h"
+#include "xics.h"
 
 
 /*
- * The primary thread of each non-boot processor is recorded here before
- * smp init.
+ * The Primary thread of each non-boot processor was started from the OF client
+ * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
  */
 static cpumask_t of_spin_map;
 
@@ -105,36 +105,6 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 }
 
 #ifdef CONFIG_XICS
-static inline void smp_xics_do_message(int cpu, int msg)
-{
-	set_bit(msg, &xics_ipi_message[cpu].value);
-	mb();
-	xics_cause_IPI(cpu);
-}
-
-static void smp_xics_message_pass(int target, int msg)
-{
-	unsigned int i;
-
-	if (target < NR_CPUS) {
-		smp_xics_do_message(target, msg);
-	} else {
-		for_each_online_cpu(i) {
-			if (target == MSG_ALL_BUT_SELF
-			    && i == smp_processor_id())
-				continue;
-			smp_xics_do_message(i, msg);
-		}
-	}
-}
-
-static int __init smp_xics_probe(void)
-{
-	xics_request_IPIs();
-
-	return cpus_weight(cpu_possible_map);
-}
-
 static void __devinit smp_xics_setup_cpu(int cpu)
 {
 	if (cpu != boot_cpuid)
@@ -191,8 +161,7 @@ static void __devinit smp_pSeries_kick_cpu(int nr)
 static int smp_pSeries_cpu_bootable(unsigned int nr)
 {
 	/* Special case - we inhibit secondary thread startup
-	 * during boot if the user requests it.  Odd-numbered
-	 * cpus are assumed to be secondary threads.
+	 * during boot if the user requests it.
 	 */
 	if (system_state < SYSTEM_RUNNING &&
 	    cpu_has_feature(CPU_FTR_SMT) &&
@@ -229,11 +198,7 @@ static void __init smp_init_pseries(void)
 	/* Mark threads which are still spinning in hold loops. */
 	if (cpu_has_feature(CPU_FTR_SMT)) {
 		for_each_present_cpu(i) { 
-			if (i % 2 == 0)
-				/*
-				 * Even-numbered logical cpus correspond to
-				 * primary threads.
-				 */
+			if (cpu_thread_in_core(i) == 0)
 				cpu_set(i, of_spin_map);
 		}
 	} else {
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 0fc830f..e190477 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -9,32 +9,30 @@
  *  2 of the License, or (at your option) any later version.
  */
 
-
 #include <linux/types.h>
 #include <linux/threads.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
-#include <linux/signal.h>
 #include <linux/init.h>
-#include <linux/gfp.h>
 #include <linux/radix-tree.h>
 #include <linux/cpu.h>
+#include <linux/of.h>
 
 #include <asm/firmware.h>
-#include <asm/prom.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/smp.h>
 #include <asm/rtas.h>
 #include <asm/hvcall.h>
 #include <asm/machdep.h>
-#include <asm/i8259.h>
 
 #include "xics.h"
 #include "plpar_wrappers.h"
 
+static struct irq_host *xics_host;
+
 #define XICS_IPI		2
 #define XICS_IRQ_SPURIOUS	0
 
@@ -47,6 +45,20 @@
  */
 #define IPI_PRIORITY		4
 
+static unsigned int default_server = 0xFF;
+static unsigned int default_distrib_server = 0;
+static unsigned int interrupt_server_size = 8;
+
+/* RTAS service tokens */
+static int ibm_get_xive;
+static int ibm_set_xive;
+static int ibm_int_on;
+static int ibm_int_off;
+
+
+/* Direct hardware low level accessors */
+
+/* The part of the interrupt presentation layer that we care about */
 struct xics_ipl {
 	union {
 		u32 word;
@@ -65,27 +77,6 @@ struct xics_ipl {
 
 static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS];
 
-static unsigned int default_server = 0xFF;
-static unsigned int default_distrib_server = 0;
-static unsigned int interrupt_server_size = 8;
-
-static struct irq_host *xics_host;
-
-/*
- * XICS only has a single IPI, so encode the messages per CPU
- */
-struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
-
-/* RTAS service tokens */
-static int ibm_get_xive;
-static int ibm_set_xive;
-static int ibm_int_on;
-static int ibm_int_off;
-
-
-/* Direct HW low level accessors */
-
-
 static inline unsigned int direct_xirr_info_get(void)
 {
 	int cpu = smp_processor_id();
@@ -93,7 +84,7 @@ static inline unsigned int direct_xirr_info_get(void)
 	return in_be32(&xics_per_cpu[cpu]->xirr.word);
 }
 
-static inline void direct_xirr_info_set(int value)
+static inline void direct_xirr_info_set(unsigned int value)
 {
 	int cpu = smp_processor_id();
 
@@ -115,7 +106,6 @@ static inline void direct_qirr_info(int n_cpu, u8 value)
 
 /* LPAR low level accessors */
 
-
 static inline unsigned int lpar_xirr_info_get(void)
 {
 	unsigned long lpar_rc;
@@ -127,15 +117,14 @@ static inline unsigned int lpar_xirr_info_get(void)
 	return (unsigned int)return_value;
 }
 
-static inline void lpar_xirr_info_set(int value)
+static inline void lpar_xirr_info_set(unsigned int value)
 {
 	unsigned long lpar_rc;
-	unsigned long val64 = value & 0xffffffff;
 
-	lpar_rc = plpar_eoi(val64);
+	lpar_rc = plpar_eoi(value);
 	if (lpar_rc != H_SUCCESS)
-		panic("bad return code EOI - rc = %ld, value=%lx\n", lpar_rc,
-		      val64);
+		panic("bad return code EOI - rc = %ld, value=%x\n", lpar_rc,
+		      value);
 }
 
 static inline void lpar_cppr_info(u8 value)
@@ -157,48 +146,7 @@ static inline void lpar_qirr_info(int n_cpu , u8 value)
 }
 
 
-/* High level handlers and init code */
-
-static void xics_update_irq_servers(void)
-{
-	int i, j;
-	struct device_node *np;
-	u32 ilen;
-	const u32 *ireg, *isize;
-	u32 hcpuid;
-
-	/* Find the server numbers for the boot cpu. */
-	np = of_get_cpu_node(boot_cpuid, NULL);
-	BUG_ON(!np);
-
-	ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
-	if (!ireg) {
-		of_node_put(np);
-		return;
-	}
-
-	i = ilen / sizeof(int);
-	hcpuid = get_hard_smp_processor_id(boot_cpuid);
-
-	/* Global interrupt distribution server is specified in the last
-	 * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last
-	 * entry fom this property for current boot cpu id and use it as
-	 * default distribution server
-	 */
-	for (j = 0; j < i; j += 2) {
-		if (ireg[j] == hcpuid) {
-			default_server = hcpuid;
-			default_distrib_server = ireg[j+1];
-
-			isize = of_get_property(np,
-					"ibm,interrupt-server#-size", NULL);
-			if (isize)
-				interrupt_server_size = *isize;
-		}
-	}
-
-	of_node_put(np);
-}
+/* Interface to generic irq subsystem */
 
 #ifdef CONFIG_SMP
 static int get_irq_server(unsigned int virq, unsigned int strict_check)
@@ -208,9 +156,6 @@ static int get_irq_server(unsigned int virq, unsigned int strict_check)
 	cpumask_t cpumask = irq_desc[virq].affinity;
 	cpumask_t tmp = CPU_MASK_NONE;
 
-	if (! cpu_isset(default_server, cpu_online_map))
-		xics_update_irq_servers();
-
 	if (!distribute_irqs)
 		return default_server;
 
@@ -238,7 +183,6 @@ static int get_irq_server(unsigned int virq, unsigned int strict_check)
 }
 #endif
 
-
 static void xics_unmask_irq(unsigned int virq)
 {
 	unsigned int irq;
@@ -257,21 +201,28 @@ static void xics_unmask_irq(unsigned int virq)
 	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
 				DEFAULT_PRIORITY);
 	if (call_status != 0) {
-		printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_set_xive "
-		       "returned %d\n", irq, call_status);
-		printk("set_xive %x, server %x\n", ibm_set_xive, server);
+		printk(KERN_ERR
+			"%s: ibm_set_xive irq %u server %x returned %d\n",
+			__func__, irq, server, call_status);
 		return;
 	}
 
 	/* Now unmask the interrupt (often a no-op) */
 	call_status = rtas_call(ibm_int_on, 1, 1, NULL, irq);
 	if (call_status != 0) {
-		printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_int_on "
-		       "returned %d\n", irq, call_status);
+		printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
+			__func__, irq, call_status);
 		return;
 	}
 }
 
+static unsigned int xics_startup(unsigned int virq)
+{
+	/* unmask it */
+	xics_unmask_irq(virq);
+	return 0;
+}
+
 static void xics_mask_real_irq(unsigned int irq)
 {
 	int call_status;
@@ -281,8 +232,8 @@ static void xics_mask_real_irq(unsigned int irq)
 
 	call_status = rtas_call(ibm_int_off, 1, 1, NULL, irq);
 	if (call_status != 0) {
-		printk(KERN_ERR "xics_disable_real_irq: irq=%u: "
-		       "ibm_int_off returned %d\n", irq, call_status);
+		printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
+			__func__, irq, call_status);
 		return;
 	}
 
@@ -290,8 +241,8 @@ static void xics_mask_real_irq(unsigned int irq)
 	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq,
 				default_server, 0xff);
 	if (call_status != 0) {
-		printk(KERN_ERR "xics_disable_irq: irq=%u: ibm_set_xive(0xff)"
-		       " returned %d\n", irq, call_status);
+		printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
+			__func__, irq, call_status);
 		return;
 	}
 }
@@ -308,132 +259,77 @@ static void xics_mask_irq(unsigned int virq)
 	xics_mask_real_irq(irq);
 }
 
-static unsigned int xics_startup(unsigned int virq)
-{
-	unsigned int irq;
-
-	/* force a reverse mapping of the interrupt so it gets in the cache */
-	irq = (unsigned int)irq_map[virq].hwirq;
-	irq_radix_revmap(xics_host, irq);
-
-	/* unmask it */
-	xics_unmask_irq(virq);
-	return 0;
-}
-
-static void xics_eoi_direct(unsigned int virq)
+static void xics_mask_unknown_vec(unsigned int vec)
 {
-	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
-
-	iosync();
-	direct_xirr_info_set((0xff << 24) | irq);
+	printk(KERN_ERR "Interrupt %u (real) is invalid, disabling it.\n", vec);
+	xics_mask_real_irq(vec);
 }
 
-
-static void xics_eoi_lpar(unsigned int virq)
+static inline unsigned int xics_xirr_vector(unsigned int xirr)
 {
-	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
-
-	iosync();
-	lpar_xirr_info_set((0xff << 24) | irq);
+	/*
+	 * The top byte is the old cppr, to be restored on EOI.
+	 * The remaining 24 bits are the vector.
+	 */
+	return xirr & 0x00ffffff;
 }
 
-static inline unsigned int xics_remap_irq(unsigned int vec)
+static unsigned int xics_get_irq_direct(void)
 {
+	unsigned int xirr = direct_xirr_info_get();
+	unsigned int vec = xics_xirr_vector(xirr);
 	unsigned int irq;
 
-	vec &= 0x00ffffff;
-
 	if (vec == XICS_IRQ_SPURIOUS)
 		return NO_IRQ;
-	irq = irq_radix_revmap(xics_host, vec);
+
+	irq = irq_radix_revmap_lookup(xics_host, vec);
 	if (likely(irq != NO_IRQ))
 		return irq;
 
-	printk(KERN_ERR "Interrupt %u (real) is invalid,"
-	       " disabling it.\n", vec);
-	xics_mask_real_irq(vec);
-	return NO_IRQ;
-}
+	/* We don't have a linux mapping, so have rtas mask it. */
+	xics_mask_unknown_vec(vec);
 
-static unsigned int xics_get_irq_direct(void)
-{
-	return xics_remap_irq(direct_xirr_info_get());
+	/* We might learn about it later, so EOI it */
+	direct_xirr_info_set(xirr);
+	return NO_IRQ;
 }
 
 static unsigned int xics_get_irq_lpar(void)
 {
-	return xics_remap_irq(lpar_xirr_info_get());
-}
-
-#ifdef CONFIG_SMP
-
-static irqreturn_t xics_ipi_dispatch(int cpu)
-{
-	WARN_ON(cpu_is_offline(cpu));
+	unsigned int xirr = lpar_xirr_info_get();
+	unsigned int vec = xics_xirr_vector(xirr);
+	unsigned int irq;
 
-	while (xics_ipi_message[cpu].value) {
-		if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION,
-				       &xics_ipi_message[cpu].value)) {
-			mb();
-			smp_message_recv(PPC_MSG_CALL_FUNCTION);
-		}
-		if (test_and_clear_bit(PPC_MSG_RESCHEDULE,
-				       &xics_ipi_message[cpu].value)) {
-			mb();
-			smp_message_recv(PPC_MSG_RESCHEDULE);
-		}
-		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE,
-				       &xics_ipi_message[cpu].value)) {
-			mb();
-			smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
-		}
-#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
-		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
-				       &xics_ipi_message[cpu].value)) {
-			mb();
-			smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
-		}
-#endif
-	}
-	return IRQ_HANDLED;
-}
+	if (vec == XICS_IRQ_SPURIOUS)
+		return NO_IRQ;
 
-static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id)
-{
-	int cpu = smp_processor_id();
+	irq = irq_radix_revmap_lookup(xics_host, vec);
+	if (likely(irq != NO_IRQ))
+		return irq;
 
-	direct_qirr_info(cpu, 0xff);
+	/* We don't have a linux mapping, so have RTAS mask it. */
+	xics_mask_unknown_vec(vec);
 
-	return xics_ipi_dispatch(cpu);
+	/* We might learn about it later, so EOI it */
+	lpar_xirr_info_set(xirr);
+	return NO_IRQ;
 }
 
-static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id)
+static void xics_eoi_direct(unsigned int virq)
 {
-	int cpu = smp_processor_id();
-
-	lpar_qirr_info(cpu, 0xff);
+	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
-	return xics_ipi_dispatch(cpu);
+	iosync();
+	direct_xirr_info_set((0xff << 24) | irq);
 }
 
-void xics_cause_IPI(int cpu)
+static void xics_eoi_lpar(unsigned int virq)
 {
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		lpar_qirr_info(cpu, IPI_PRIORITY);
-	else
-		direct_qirr_info(cpu, IPI_PRIORITY);
-}
-
-#endif /* CONFIG_SMP */
+	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
-static void xics_set_cpu_priority(unsigned char cppr)
-{
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		lpar_cppr_info(cppr);
-	else
-		direct_cppr_info(cppr);
 	iosync();
+	lpar_xirr_info_set((0xff << 24) | irq);
 }
 
 static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
@@ -450,8 +346,8 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
 	status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
 
 	if (status) {
-		printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive "
-		       "returns %d\n", irq, status);
+		printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
+			__func__, irq, status);
 		return;
 	}
 
@@ -463,8 +359,9 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
 	if (irq_server == -1) {
 		char cpulist[128];
 		cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
-		printk(KERN_WARNING "xics_set_affinity: No online cpus in "
-				"the mask %s for irq %d\n", cpulist, virq);
+		printk(KERN_WARNING
+			"%s: No online cpus in the mask %s for irq %d\n",
+			__func__, cpulist, virq);
 		return;
 	}
 
@@ -472,28 +369,12 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
 				irq, irq_server, xics_status[1]);
 
 	if (status) {
-		printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive "
-		       "returns %d\n", irq, status);
+		printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
+			__func__, irq, status);
 		return;
 	}
 }
 
-void xics_setup_cpu(void)
-{
-	xics_set_cpu_priority(0xff);
-
-	/*
-	 * Put the calling processor into the GIQ.  This is really only
-	 * necessary from a secondary thread as the OF start-cpu interface
-	 * performs this function for us on primary threads.
-	 *
-	 * XXX: undo of teardown on kexec needs this too, as may hotplug
-	 */
-	rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
-		(1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
-}
-
-
 static struct irq_chip xics_pic_direct = {
 	.typename = " XICS     ",
 	.startup = xics_startup,
@@ -503,7 +384,6 @@ static struct irq_chip xics_pic_direct = {
 	.set_affinity = xics_set_affinity
 };
 
-
 static struct irq_chip xics_pic_lpar = {
 	.typename = " XICS     ",
 	.startup = xics_startup,
@@ -513,6 +393,9 @@ static struct irq_chip xics_pic_lpar = {
 	.set_affinity = xics_set_affinity
 };
 
+
+/* Interface to arch irq controller subsystem layer */
+
 /* Points to the irq_chip we're actually using */
 static struct irq_chip *xics_irq_chip;
 
@@ -530,6 +413,9 @@ static int xics_host_map(struct irq_host *h, unsigned int virq,
 {
 	pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
 
+	/* Insert the interrupt mapping into the radix tree for fast lookup */
+	irq_radix_revmap_insert(xics_host, virq, hw);
+
 	get_irq_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
 	return 0;
@@ -569,10 +455,169 @@ static void __init xics_init_host(void)
 	irq_set_default_host(xics_host);
 }
 
+
+/* Inter-processor interrupt support */
+
+#ifdef CONFIG_SMP
+/*
+ * XICS only has a single IPI, so encode the messages per CPU
+ */
+struct xics_ipi_struct {
+        unsigned long value;
+	} ____cacheline_aligned;
+
+static struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+
+static inline void smp_xics_do_message(int cpu, int msg)
+{
+	set_bit(msg, &xics_ipi_message[cpu].value);
+	mb();
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		lpar_qirr_info(cpu, IPI_PRIORITY);
+	else
+		direct_qirr_info(cpu, IPI_PRIORITY);
+}
+
+void smp_xics_message_pass(int target, int msg)
+{
+	unsigned int i;
+
+	if (target < NR_CPUS) {
+		smp_xics_do_message(target, msg);
+	} else {
+		for_each_online_cpu(i) {
+			if (target == MSG_ALL_BUT_SELF
+			    && i == smp_processor_id())
+				continue;
+			smp_xics_do_message(i, msg);
+		}
+	}
+}
+
+static irqreturn_t xics_ipi_dispatch(int cpu)
+{
+	WARN_ON(cpu_is_offline(cpu));
+
+	mb();	/* order mmio clearing qirr */
+	while (xics_ipi_message[cpu].value) {
+		if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION,
+				       &xics_ipi_message[cpu].value)) {
+			smp_message_recv(PPC_MSG_CALL_FUNCTION);
+		}
+		if (test_and_clear_bit(PPC_MSG_RESCHEDULE,
+				       &xics_ipi_message[cpu].value)) {
+			smp_message_recv(PPC_MSG_RESCHEDULE);
+		}
+		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE,
+				       &xics_ipi_message[cpu].value)) {
+			smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
+		}
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
+				       &xics_ipi_message[cpu].value)) {
+			smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
+		}
+#endif
+	}
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	direct_qirr_info(cpu, 0xff);
+
+	return xics_ipi_dispatch(cpu);
+}
+
+static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	lpar_qirr_info(cpu, 0xff);
+
+	return xics_ipi_dispatch(cpu);
+}
+
+static void xics_request_ipi(void)
+{
+	unsigned int ipi;
+	int rc;
+
+	ipi = irq_create_mapping(xics_host, XICS_IPI);
+	BUG_ON(ipi == NO_IRQ);
+
+	/*
+	 * IPIs are marked IRQF_DISABLED as they must run with irqs
+	 * disabled
+	 */
+	set_irq_handler(ipi, handle_percpu_irq);
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		rc = request_irq(ipi, xics_ipi_action_lpar,
+				IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+	else
+		rc = request_irq(ipi, xics_ipi_action_direct,
+				IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+	BUG_ON(rc);
+}
+
+int __init smp_xics_probe(void)
+{
+	xics_request_ipi();
+
+	return cpus_weight(cpu_possible_map);
+}
+
+#endif /* CONFIG_SMP */
+
+
+/* Initialization */
+
+static void xics_update_irq_servers(void)
+{
+	int i, j;
+	struct device_node *np;
+	u32 ilen;
+	const u32 *ireg, *isize;
+	u32 hcpuid;
+
+	/* Find the server numbers for the boot cpu. */
+	np = of_get_cpu_node(boot_cpuid, NULL);
+	BUG_ON(!np);
+
+	ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
+	if (!ireg) {
+		of_node_put(np);
+		return;
+	}
+
+	i = ilen / sizeof(int);
+	hcpuid = get_hard_smp_processor_id(boot_cpuid);
+
+	/* Global interrupt distribution server is specified in the last
+	 * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last
+	 * entry fom this property for current boot cpu id and use it as
+	 * default distribution server
+	 */
+	for (j = 0; j < i; j += 2) {
+		if (ireg[j] == hcpuid) {
+			default_server = hcpuid;
+			default_distrib_server = ireg[j+1];
+		}
+	}
+
+	/* get the bit size of server numbers */
+	isize = of_get_property(np, "ibm,interrupt-server#-size", NULL);
+	if (isize)
+		interrupt_server_size = *isize;
+
+	of_node_put(np);
+}
+
 static void __init xics_map_one_cpu(int hw_id, unsigned long addr,
 				     unsigned long size)
 {
-#ifdef CONFIG_SMP
 	int i;
 
 	/* This may look gross but it's good enough for now, we don't quite
@@ -586,11 +631,6 @@ static void __init xics_map_one_cpu(int hw_id, unsigned long addr,
 			return;
 		}
 	}
-#else
-	if (hw_id != 0)
-		return;
-	xics_per_cpu[0] = ioremap(addr, size);
-#endif /* CONFIG_SMP */
 }
 
 static void __init xics_init_one_node(struct device_node *np,
@@ -652,15 +692,17 @@ void __init xics_init_IRQ(void)
 
 	for_each_node_by_type(np, "PowerPC-External-Interrupt-Presentation") {
 		found = 1;
-		if (firmware_has_feature(FW_FEATURE_LPAR))
+		if (firmware_has_feature(FW_FEATURE_LPAR)) {
+			of_node_put(np);
 			break;
+			}
 		xics_init_one_node(np, &indx);
 	}
 	if (found == 0)
 		return;
 
-	xics_init_host();
 	xics_update_irq_servers();
+	xics_init_host();
 
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		ppc_md.get_irq = xics_get_irq_lpar;
@@ -672,30 +714,31 @@ void __init xics_init_IRQ(void)
 	ppc64_boot_msg(0x21, "XICS Done");
 }
 
+/* Cpu startup, shutdown, and hotplug */
 
-#ifdef CONFIG_SMP
-void xics_request_IPIs(void)
+static void xics_set_cpu_priority(unsigned char cppr)
 {
-	unsigned int ipi;
-	int rc;
-
-	ipi = irq_create_mapping(xics_host, XICS_IPI);
-	BUG_ON(ipi == NO_IRQ);
-
-	/*
-	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled
-	 */
-	set_irq_handler(ipi, handle_percpu_irq);
 	if (firmware_has_feature(FW_FEATURE_LPAR))
-		rc = request_irq(ipi, xics_ipi_action_lpar, IRQF_DISABLED,
-				"IPI", NULL);
+		lpar_cppr_info(cppr);
 	else
-		rc = request_irq(ipi, xics_ipi_action_direct, IRQF_DISABLED,
-				"IPI", NULL);
-	BUG_ON(rc);
+		direct_cppr_info(cppr);
+	iosync();
+}
+
+/* Have the calling processor join or leave the specified global queue */
+static void xics_set_cpu_giq(unsigned int gserver, unsigned int join)
+{
+	int status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
+		(1UL << interrupt_server_size) - 1 - gserver, join);
+	WARN_ON(status < 0);
+}
+
+void xics_setup_cpu(void)
+{
+	xics_set_cpu_priority(0xff);
+
+	xics_set_cpu_giq(default_distrib_server, 1);
 }
-#endif /* CONFIG_SMP */
 
 void xics_teardown_cpu(void)
 {
@@ -703,9 +746,7 @@ void xics_teardown_cpu(void)
 
 	xics_set_cpu_priority(0);
 
-	/*
-	 * Clear IPI
-	 */
+	/* Clear any pending IPI request */
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		lpar_qirr_info(cpu, 0xff);
 	else
@@ -714,34 +755,28 @@ void xics_teardown_cpu(void)
 
 void xics_kexec_teardown_cpu(int secondary)
 {
-	unsigned int ipi;
-	struct irq_desc *desc;
-
 	xics_teardown_cpu();
 
 	/*
-	 * we need to EOI the IPI
+	 * we take the ipi irq but and never return so we
+	 * need to EOI the IPI, but want to leave our priority 0
 	 *
-	 * probably need to check all the other interrupts too
+	 * should we check all the other interrupts too?
 	 * should we be flagging idle loop instead?
 	 * or creating some task to be scheduled?
 	 */
 
-	ipi = irq_find_mapping(xics_host, XICS_IPI);
-	if (ipi == XICS_IRQ_SPURIOUS)
-		return;
-	desc = get_irq_desc(ipi);
-	if (desc->chip && desc->chip->eoi)
-		desc->chip->eoi(ipi);
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		lpar_xirr_info_set((0x00 << 24) | XICS_IPI);
+	else
+		direct_xirr_info_set((0x00 << 24) | XICS_IPI);
 
 	/*
 	 * Some machines need to have at least one cpu in the GIQ,
 	 * so leave the master cpu in the group.
 	 */
 	if (secondary)
-		rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
-				   (1UL << interrupt_server_size) - 1 -
-				   default_distrib_server, 0);
+		xics_set_cpu_giq(default_distrib_server, 0);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -749,17 +784,18 @@ void xics_kexec_teardown_cpu(int secondary)
 /* Interrupts are disabled. */
 void xics_migrate_irqs_away(void)
 {
-	int status;
 	int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
 	unsigned int irq, virq;
 
+	/* If we used to be the default server, move to the new "boot_cpuid" */
+	if (hw_cpu == default_server)
+		xics_update_irq_servers();
+
 	/* Reject any interrupt that was queued to us... */
 	xics_set_cpu_priority(0);
 
-	/* remove ourselves from the global interrupt queue */
-	status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
-		(1UL << interrupt_server_size) - 1 - default_distrib_server, 0);
-	WARN_ON(status < 0);
+	/* Remove ourselves from the global interrupt queue */
+	xics_set_cpu_giq(default_distrib_server, 0);
 
 	/* Allow IPIs again... */
 	xics_set_cpu_priority(DEFAULT_PRIORITY);
@@ -767,6 +803,7 @@ void xics_migrate_irqs_away(void)
 	for_each_irq(virq) {
 		struct irq_desc *desc;
 		int xics_status[2];
+		int status;
 		unsigned long flags;
 
 		/* We cant set affinity on ISA interrupts */
@@ -790,9 +827,8 @@ void xics_migrate_irqs_away(void)
 
 		status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
 		if (status) {
-			printk(KERN_ERR "migrate_irqs_away: irq=%u "
-					"ibm,get-xive returns %d\n",
-					virq, status);
+			printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
+					__func__, irq, status);
 			goto unlock;
 		}
 
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
index 1c5321a..d1d5a83 100644
--- a/arch/powerpc/platforms/pseries/xics.h
+++ b/arch/powerpc/platforms/pseries/xics.h
@@ -12,20 +12,12 @@
 #ifndef _POWERPC_KERNEL_XICS_H
 #define _POWERPC_KERNEL_XICS_H
 
-#include <linux/cache.h>
-
 extern void xics_init_IRQ(void);
 extern void xics_setup_cpu(void);
 extern void xics_teardown_cpu(void);
 extern void xics_kexec_teardown_cpu(int secondary);
-extern void xics_cause_IPI(int cpu);
-extern  void xics_request_IPIs(void);
 extern void xics_migrate_irqs_away(void);
-
-struct xics_ipi_struct {
-	volatile unsigned long value;
-} ____cacheline_aligned;
-
-extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+extern int smp_xics_probe(void);
+extern void smp_xics_message_pass(int target, int msg);
 
 #endif /* _POWERPC_KERNEL_XICS_H */
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index 72fb35b..3965828 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -6,3 +6,9 @@ config PPC4xx_PCI_EXPRESS
 	bool
 	depends on PCI && 4xx
 	default n
+
+config PPC_MSI_BITMAP
+	bool
+	depends on PCI_MSI
+	default y if MPIC
+	default y if FSL_PCI
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index a90054b..5afce11 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -5,6 +5,7 @@ endif
 mpic-msi-obj-$(CONFIG_PCI_MSI)	+= mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
 obj-$(CONFIG_MPIC)		+= mpic.o $(mpic-msi-obj-y)
 fsl-msi-obj-$(CONFIG_PCI_MSI)	+= fsl_msi.o
+obj-$(CONFIG_PPC_MSI_BITMAP)	+= msi_bitmap.o
 
 obj-$(CONFIG_PPC_MPC106)	+= grackle.o
 obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
@@ -15,6 +16,7 @@ obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
+obj-$(CONFIG_MPC8xxx_GPIO)	+= mpc8xxx_gpio.o
 obj-$(CONFIG_RAPIDIO)		+= fsl_rio.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
@@ -35,16 +37,14 @@ obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
 endif
+obj-$(CONFIG_PPC4xx_GPIO)	+= ppc4xx_gpio.o
 
-# Temporary hack until we have migrated to asm-powerpc
-ifeq ($(ARCH),powerpc)
 obj-$(CONFIG_CPM)		+= cpm_common.o
 obj-$(CONFIG_CPM2)		+= cpm2.o cpm2_pic.o
 obj-$(CONFIG_QUICC_ENGINE)	+= cpm_common.o
 obj-$(CONFIG_PPC_DCR)		+= dcr.o
 obj-$(CONFIG_8xx)		+= mpc8xx_pic.o cpm1.o
 obj-$(CONFIG_UCODE_PATCH)	+= micropatch.o
-endif
 
 ifeq ($(CONFIG_SUSPEND),y)
 obj-$(CONFIG_6xx)		+= 6xx-suspend.o
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 4a04823..490473c 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -546,15 +546,11 @@ static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
 	return !!(in_be16(&iop->dat) & pin_mask);
 }
 
-static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
+	int value)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
 	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
-	unsigned long flags;
-	u16 pin_mask = 1 << (15 - gpio);
-
-	spin_lock_irqsave(&cpm1_gc->lock, flags);
 
 	if (value)
 		cpm1_gc->cpdata |= pin_mask;
@@ -562,6 +558,18 @@ static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
 		cpm1_gc->cpdata &= ~pin_mask;
 
 	out_be16(&iop->dat, cpm1_gc->cpdata);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	__cpm1_gpio16_set(mm_gc, pin_mask, value);
 
 	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 }
@@ -569,14 +577,17 @@ static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
 static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
 	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
-	u16 pin_mask;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
 
-	pin_mask = 1 << (15 - gpio);
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
 
 	setbits16(&iop->dir, pin_mask);
+	__cpm1_gpio16_set(mm_gc, pin_mask, val);
 
-	cpm1_gpio16_set(gc, gpio, val);
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 
 	return 0;
 }
@@ -584,13 +595,17 @@ static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
 	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
-	u16 pin_mask;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
 
-	pin_mask = 1 << (15 - gpio);
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
 
 	clrbits16(&iop->dir, pin_mask);
 
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
 	return 0;
 }
 
@@ -655,15 +670,11 @@ static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
 	return !!(in_be32(&iop->dat) & pin_mask);
 }
 
-static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
+	int value)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
 	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
-	unsigned long flags;
-	u32 pin_mask = 1 << (31 - gpio);
-
-	spin_lock_irqsave(&cpm1_gc->lock, flags);
 
 	if (value)
 		cpm1_gc->cpdata |= pin_mask;
@@ -671,6 +682,18 @@ static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 		cpm1_gc->cpdata &= ~pin_mask;
 
 	out_be32(&iop->dat, cpm1_gc->cpdata);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	__cpm1_gpio32_set(mm_gc, pin_mask, value);
 
 	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 }
@@ -678,14 +701,17 @@ static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
 	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
-	u32 pin_mask;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
 
-	pin_mask = 1 << (31 - gpio);
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
 
 	setbits32(&iop->dir, pin_mask);
+	__cpm1_gpio32_set(mm_gc, pin_mask, val);
 
-	cpm1_gpio32_set(gc, gpio, val);
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 
 	return 0;
 }
@@ -693,13 +719,17 @@ static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
 	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
-	u32 pin_mask;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
 
-	pin_mask = 1 << (31 - gpio);
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
 
 	clrbits32(&iop->dir, pin_mask);
 
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
 	return 0;
 }
 
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index 422c8fa..0494ee5 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -11,14 +11,19 @@
  * (at your option) any later version.
  */
 
+#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/io.h>
 #include <linux/of.h>
+#include <asm/prom.h>
 #include <asm/fsl_lbc.h>
 
-spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
-
-struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-EXPORT_SYMBOL(fsl_lbc_regs);
+static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
+static struct fsl_lbc_regs __iomem *fsl_lbc_regs;
 
 static char __initdata *compat_lbc[] = {
 	"fsl,pq2-localbus",
@@ -127,3 +132,43 @@ int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm)
 	return 0;
 }
 EXPORT_SYMBOL(fsl_upm_find);
+
+/**
+ * fsl_upm_run_pattern - actually run an UPM pattern
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @io_base:	remapped pointer to where memory access should happen
+ * @mar:	MAR register content during pattern execution
+ *
+ * This function triggers dummy write to the memory specified by the io_base,
+ * thus UPM pattern actually executed. Note that mar usage depends on the
+ * pre-programmed AMX bits in the UPM RAM.
+ */
+int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fsl_lbc_lock, flags);
+
+	out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
+
+	switch (upm->width) {
+	case 8:
+		out_8(io_base, 0x0);
+		break;
+	case 16:
+		out_be16(io_base, 0x0);
+		break;
+	case 32:
+		out_be32(io_base, 0x0);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&fsl_lbc_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(fsl_upm_run_pattern);
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 2c5187c..f25ce81 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -14,7 +14,6 @@
  */
 #include <linux/irq.h>
 #include <linux/bootmem.h>
-#include <linux/bitmap.h>
 #include <linux/msi.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
@@ -67,95 +66,22 @@ static struct irq_host_ops fsl_msi_host_ops = {
 	.map = fsl_msi_host_map,
 };
 
-static irq_hw_number_t fsl_msi_alloc_hwirqs(struct fsl_msi *msi, int num)
-{
-	unsigned long flags;
-	int order = get_count_order(num);
-	int offset;
-
-	spin_lock_irqsave(&msi->bitmap_lock, flags);
-
-	offset = bitmap_find_free_region(msi->fsl_msi_bitmap,
-					NR_MSI_IRQS, order);
-
-	spin_unlock_irqrestore(&msi->bitmap_lock, flags);
-
-	pr_debug("%s: allocated 0x%x (2^%d) at offset 0x%x\n",
-		__func__, num, order, offset);
-
-	return offset;
-}
-
-static void fsl_msi_free_hwirqs(struct fsl_msi *msi, int offset, int num)
-{
-	unsigned long flags;
-	int order = get_count_order(num);
-
-	pr_debug("%s: freeing 0x%x (2^%d) at offset 0x%x\n",
-		__func__, num, order, offset);
-
-	spin_lock_irqsave(&msi->bitmap_lock, flags);
-	bitmap_release_region(msi->fsl_msi_bitmap, offset, order);
-	spin_unlock_irqrestore(&msi->bitmap_lock, flags);
-}
-
-static int fsl_msi_free_dt_hwirqs(struct fsl_msi *msi)
-{
-	int i;
-	int len;
-	const u32 *p;
-
-	bitmap_allocate_region(msi->fsl_msi_bitmap, 0,
-		       get_count_order(NR_MSI_IRQS));
-
-	p = of_get_property(msi->of_node, "msi-available-ranges", &len);
-
-	if (!p) {
-		/* No msi-available-ranges property,
-		 * All the 256 MSI interrupts can be used
-		 */
-		fsl_msi_free_hwirqs(msi, 0, 0x100);
-		return 0;
-	}
-
-	if ((len % (2 * sizeof(u32))) != 0) {
-		printk(KERN_WARNING "fsl_msi: Malformed msi-available-ranges "
-		       "property on %s\n", msi->of_node->full_name);
-		return -EINVAL;
-	}
-
-	/* Format is: (<u32 start> <u32 count>)+ */
-	len /= 2 * sizeof(u32);
-	for (i = 0; i < len; i++, p += 2)
-		fsl_msi_free_hwirqs(msi, *p, *(p + 1));
-
-	return 0;
-}
-
 static int fsl_msi_init_allocator(struct fsl_msi *msi_data)
 {
 	int rc;
-	int size = BITS_TO_LONGS(NR_MSI_IRQS) * sizeof(u32);
 
-	msi_data->fsl_msi_bitmap = kzalloc(size, GFP_KERNEL);
+	rc = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS,
+			      msi_data->irqhost->of_node);
+	if (rc)
+		return rc;
 
-	if (msi_data->fsl_msi_bitmap == NULL) {
-		pr_debug("%s: ENOMEM allocating allocator bitmap!\n",
-				__func__);
-		return -ENOMEM;
+	rc = msi_bitmap_reserve_dt_hwirqs(&msi_data->bitmap);
+	if (rc < 0) {
+		msi_bitmap_free(&msi_data->bitmap);
+		return rc;
 	}
 
-	rc = fsl_msi_free_dt_hwirqs(msi_data);
-	if (rc)
-		goto out_free;
-
 	return 0;
-out_free:
-	kfree(msi_data->fsl_msi_bitmap);
-
-	msi_data->fsl_msi_bitmap = NULL;
-	return rc;
-
 }
 
 static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type)
@@ -175,7 +101,8 @@ static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
 		if (entry->irq == NO_IRQ)
 			continue;
 		set_irq_msi(entry->irq, NULL);
-		fsl_msi_free_hwirqs(msi_data, virq_to_hw(entry->irq), 1);
+		msi_bitmap_free_hwirqs(&msi_data->bitmap,
+				       virq_to_hw(entry->irq), 1);
 		irq_dispose_mapping(entry->irq);
 	}
 
@@ -197,15 +124,14 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
 
 static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
-	irq_hw_number_t hwirq;
-	int rc;
+	int rc, hwirq;
 	unsigned int virq;
 	struct msi_desc *entry;
 	struct msi_msg msg;
 	struct fsl_msi *msi_data = fsl_msi;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
-		hwirq = fsl_msi_alloc_hwirqs(msi_data, 1);
+		hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
 		if (hwirq < 0) {
 			rc = hwirq;
 			pr_debug("%s: fail allocating msi interrupt\n",
@@ -216,9 +142,9 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		virq = irq_create_mapping(msi_data->irqhost, hwirq);
 
 		if (virq == NO_IRQ) {
-			pr_debug("%s: fail mapping hwirq 0x%lx\n",
+			pr_debug("%s: fail mapping hwirq 0x%x\n",
 					__func__, hwirq);
-			fsl_msi_free_hwirqs(msi_data, hwirq, 1);
+			msi_bitmap_free_hwirqs(&msi_data->bitmap, hwirq, 1);
 			rc = -ENOSPC;
 			goto out_free;
 		}
@@ -317,14 +243,11 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
 		goto error_out;
 	}
 
-	msi->of_node = of_node_get(dev->node);
+	msi->irqhost = irq_alloc_host(dev->node, IRQ_HOST_MAP_LINEAR,
+				      NR_MSI_IRQS, &fsl_msi_host_ops, 0);
 
-	msi->irqhost = irq_alloc_host(of_node_get(dev->node),
-				IRQ_HOST_MAP_LINEAR,
-				NR_MSI_IRQS, &fsl_msi_host_ops, 0);
 	if (msi->irqhost == NULL) {
 		dev_err(&dev->dev, "No memory for MSI irqhost\n");
-		of_node_put(dev->node);
 		err = -ENOMEM;
 		goto error_out;
 	}
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index a653468..331c7e7 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -13,6 +13,8 @@
 #ifndef _POWERPC_SYSDEV_FSL_MSI_H
 #define _POWERPC_SYSDEV_FSL_MSI_H
 
+#include <asm/msi_bitmap.h>
+
 #define NR_MSI_REG		8
 #define IRQS_PER_MSI_REG	32
 #define NR_MSI_IRQS	(NR_MSI_REG * IRQS_PER_MSI_REG)
@@ -22,9 +24,6 @@
 #define FSL_PIC_IP_IPIC	0x00000002
 
 struct fsl_msi {
-	/* Device node of the MSI interrupt*/
-	struct device_node *of_node;
-
 	struct irq_host *irqhost;
 
 	unsigned long cascade_irq;
@@ -34,8 +33,7 @@ struct fsl_msi {
 	void __iomem *msi_regs;
 	u32 feature;
 
-	unsigned long *fsl_msi_bitmap;
-	spinlock_t bitmap_lock;
+	struct msi_bitmap bitmap;
 };
 
 #endif /* _POWERPC_SYSDEV_FSL_MSI_H */
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 61e6d77..5b264eb 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1,7 +1,7 @@
 /*
- * MPC85xx/86xx PCI/PCIE support routing.
+ * MPC83xx/85xx/86xx PCI/PCIE support routing.
  *
- * Copyright 2007 Freescale Semiconductor, Inc
+ * Copyright 2007,2008 Freescale Semiconductor, Inc
  *
  * Initial author: Xianghua Xiao <x.xiao@freescale.com>
  * Recode: ZHANG WEI <wei.zhang@freescale.com>
@@ -251,20 +251,47 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
 #endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
 
-#if defined(CONFIG_PPC_83xx)
+#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
 int __init mpc83xx_add_bridge(struct device_node *dev)
 {
 	int len;
 	struct pci_controller *hose;
-	struct resource rsrc;
+	struct resource rsrc_reg;
+	struct resource rsrc_cfg;
 	const int *bus_range;
-	int primary = 1, has_address = 0;
-	phys_addr_t immr = get_immrbase();
+	int primary;
 
 	pr_debug("Adding PCI host bridge %s\n", dev->full_name);
 
 	/* Fetch host bridge registers address */
-	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+	if (of_address_to_resource(dev, 0, &rsrc_reg)) {
+		printk(KERN_WARNING "Can't get pci register base!\n");
+		return -ENOMEM;
+	}
+
+	memset(&rsrc_cfg, 0, sizeof(rsrc_cfg));
+
+	if (of_address_to_resource(dev, 1, &rsrc_cfg)) {
+		printk(KERN_WARNING
+			"No pci config register base in dev tree, "
+			"using default\n");
+		/*
+		 * MPC83xx supports up to two host controllers
+		 * 	one at 0x8500 has config space registers at 0x8300
+		 * 	one at 0x8600 has config space registers at 0x8380
+		 */
+		if ((rsrc_reg.start & 0xfffff) == 0x8500)
+			rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300;
+		else if ((rsrc_reg.start & 0xfffff) == 0x8600)
+			rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380;
+	}
+	/*
+	 * Controller at offset 0x8500 is primary
+	 */
+	if ((rsrc_reg.start & 0xfffff) == 0x8500)
+		primary = 1;
+	else
+		primary = 0;
 
 	/* Get bus range if any */
 	bus_range = of_get_property(dev, "bus-range", &len);
@@ -281,22 +308,11 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-	/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
-	 * the other at 0x8600, we consider the 0x8500 the primary controller
-	 */
-	/* PCI 1 */
-	if ((rsrc.start & 0xfffff) == 0x8500) {
-		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
-	}
-	/* PCI 2 */
-	if ((rsrc.start & 0xfffff) == 0x8600) {
-		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
-		primary = 0;
-	}
+	setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0);
 
-	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
+	printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
 	       "Firmware bus number: %d->%d\n",
-	       (unsigned long long)rsrc.start, hose->first_busno,
+	       (unsigned long long)rsrc_reg.start, hose->first_busno,
 	       hose->last_busno);
 
 	pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 214388e..01b884b 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -412,53 +412,6 @@ err:
 
 arch_initcall(gfar_of_init);
 
-
-#ifdef CONFIG_PPC_83xx
-static int __init mpc83xx_wdt_init(void)
-{
-	struct resource r;
-	struct device_node *np;
-	struct platform_device *dev;
-	u32 freq = fsl_get_sys_freq();
-	int ret;
-
-	np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
-
-	if (!np) {
-		ret = -ENODEV;
-		goto nodev;
-	}
-
-	memset(&r, 0, sizeof(r));
-
-	ret = of_address_to_resource(np, 0, &r);
-	if (ret)
-		goto err;
-
-	dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
-	if (IS_ERR(dev)) {
-		ret = PTR_ERR(dev);
-		goto err;
-	}
-
-	ret = platform_device_add_data(dev, &freq, sizeof(freq));
-	if (ret)
-		goto unreg;
-
-	of_node_put(np);
-	return 0;
-
-unreg:
-	platform_device_unregister(dev);
-err:
-	of_node_put(np);
-nodev:
-	return ret;
-}
-
-arch_initcall(mpc83xx_wdt_init);
-#endif
-
 static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
 {
 	if (!phy_type)
@@ -767,42 +720,6 @@ void fsl_rstcr_restart(char *cmd)
 #endif
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
-struct platform_diu_data_ops diu_ops = {
-	.diu_size = 1280 * 1024 * 4,	/* default one 1280x1024 buffer */
-};
+struct platform_diu_data_ops diu_ops;
 EXPORT_SYMBOL(diu_ops);
-
-int __init preallocate_diu_videomemory(void)
-{
-	pr_debug("diu_size=%lu\n", diu_ops.diu_size);
-
-	diu_ops.diu_mem = __alloc_bootmem(diu_ops.diu_size, 8, 0);
-	if (!diu_ops.diu_mem) {
-		printk(KERN_ERR "fsl-diu: cannot allocate %lu bytes\n",
-			diu_ops.diu_size);
-		return -ENOMEM;
-	}
-
-	pr_debug("diu_mem=%p\n", diu_ops.diu_mem);
-
-	rh_init(&diu_ops.diu_rh_info, 4096, ARRAY_SIZE(diu_ops.diu_rh_block),
-		diu_ops.diu_rh_block);
-	return rh_attach_region(&diu_ops.diu_rh_info,
-				(unsigned long) diu_ops.diu_mem,
-				diu_ops.diu_size);
-}
-
-static int __init early_parse_diufb(char *p)
-{
-	if (!p)
-		return 1;
-
-	diu_ops.diu_size = _ALIGN_UP(memparse(p, &p), 8);
-
-	pr_debug("diu_size=%lu\n", diu_ops.diu_size);
-
-	return 0;
-}
-early_param("diufb", early_parse_diufb);
-
 #endif
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 0242998..60f7f22 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -20,14 +20,7 @@ extern int fsl_spi_init(struct spi_board_info *board_infos,
 extern void fsl_rstcr_restart(char *cmd);
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
-#include <linux/bootmem.h>
-#include <asm/rheap.h>
 struct platform_diu_data_ops {
-	rh_block_t diu_rh_block[16];
-	rh_info_t diu_rh_info;
-	unsigned long diu_size;
-	void *diu_mem;
-
 	unsigned int (*get_pixel_format) (unsigned int bits_per_pixel,
 		int monitor_port);
 	void (*set_gamma_table) (int monitor_port, char *gamma_table_base);
@@ -38,7 +31,6 @@ struct platform_diu_data_ops {
 };
 
 extern struct platform_diu_data_ops diu_ops;
-int __init preallocate_diu_videomemory(void);
 #endif
 
 #endif
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c
new file mode 100644
index 0000000..103eace
--- /dev/null
+++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c
@@ -0,0 +1,171 @@
+/*
+ * GPIOs on MPC8349/8572/8610 and compatible
+ *
+ * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+
+#define MPC8XXX_GPIO_PINS	32
+
+#define GPIO_DIR		0x00
+#define GPIO_ODR		0x04
+#define GPIO_DAT		0x08
+#define GPIO_IER		0x0c
+#define GPIO_IMR		0x10
+#define GPIO_ICR		0x14
+
+struct mpc8xxx_gpio_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/*
+	 * shadowed data register to be able to clear/set output pins in
+	 * open drain mode safely
+	 */
+	u32 data;
+};
+
+static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
+{
+	return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio);
+}
+
+static inline struct mpc8xxx_gpio_chip *
+to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm)
+{
+	return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc);
+}
+
+static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+	mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
+}
+
+static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+
+	return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
+}
+
+static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	if (val)
+		mpc8xxx_gc->data |= mpc8xxx_gpio2mask(gpio);
+	else
+		mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio);
+
+	out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
+
+	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
+
+	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+
+	return 0;
+}
+
+static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	unsigned long flags;
+
+	mpc8xxx_gpio_set(gc, gpio, val);
+
+	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
+
+	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+
+	return 0;
+}
+
+static void __init mpc8xxx_add_controller(struct device_node *np)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+	int ret;
+
+	mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL);
+	if (!mpc8xxx_gc) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	spin_lock_init(&mpc8xxx_gc->lock);
+
+	mm_gc = &mpc8xxx_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = mpc8xxx_gpio_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = MPC8XXX_GPIO_PINS;
+	gc->direction_input = mpc8xxx_gpio_dir_in;
+	gc->direction_output = mpc8xxx_gpio_dir_out;
+	gc->get = mpc8xxx_gpio_get;
+	gc->set = mpc8xxx_gpio_set;
+
+	ret = of_mm_gpiochip_add(np, mm_gc);
+	if (ret)
+		goto err;
+
+	return;
+
+err:
+	pr_err("%s: registration failed with status %d\n",
+	       np->full_name, ret);
+	kfree(mpc8xxx_gc);
+
+	return;
+}
+
+static int __init mpc8xxx_add_gpiochips(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,mpc8349-gpio")
+		mpc8xxx_add_controller(np);
+
+	for_each_compatible_node(np, NULL, "fsl,mpc8572-gpio")
+		mpc8xxx_add_controller(np);
+
+	for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio")
+		mpc8xxx_add_controller(np);
+
+	return 0;
+}
+arch_initcall(mpc8xxx_add_gpiochips);
diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h
index fbf8a26..6209c62 100644
--- a/arch/powerpc/sysdev/mpic.h
+++ b/arch/powerpc/sysdev/mpic.h
@@ -14,8 +14,6 @@
 #ifdef CONFIG_PCI_MSI
 extern void mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq);
 extern int mpic_msi_init_allocator(struct mpic *mpic);
-extern irq_hw_number_t mpic_msi_alloc_hwirqs(struct mpic *mpic, int num);
-extern void mpic_msi_free_hwirqs(struct mpic *mpic, int offset, int num);
 extern int mpic_u3msi_init(struct mpic *mpic);
 extern int mpic_pasemi_msi_init(struct mpic *mpic);
 #else
diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
index de3e5e8..1d44eee 100644
--- a/arch/powerpc/sysdev/mpic_msi.c
+++ b/arch/powerpc/sysdev/mpic_msi.c
@@ -15,59 +15,17 @@
 #include <asm/prom.h>
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
+#include <asm/msi_bitmap.h>
 
 #include <sysdev/mpic.h>
 
-static void __mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq)
-{
-	pr_debug("mpic: reserving hwirq 0x%lx\n", hwirq);
-	bitmap_allocate_region(mpic->hwirq_bitmap, hwirq, 0);
-}
-
 void mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq)
 {
-	unsigned long flags;
-
 	/* The mpic calls this even when there is no allocator setup */
-	if (!mpic->hwirq_bitmap)
+	if (!mpic->msi_bitmap.bitmap)
 		return;
 
-	spin_lock_irqsave(&mpic->bitmap_lock, flags);
-	__mpic_msi_reserve_hwirq(mpic, hwirq);
-	spin_unlock_irqrestore(&mpic->bitmap_lock, flags);
-}
-
-irq_hw_number_t mpic_msi_alloc_hwirqs(struct mpic *mpic, int num)
-{
-	unsigned long flags;
-	int offset, order = get_count_order(num);
-
-	spin_lock_irqsave(&mpic->bitmap_lock, flags);
-	/*
-	 * This is fast, but stricter than we need. We might want to add
-	 * a fallback routine which does a linear search with no alignment.
-	 */
-	offset = bitmap_find_free_region(mpic->hwirq_bitmap, mpic->irq_count,
-					 order);
-	spin_unlock_irqrestore(&mpic->bitmap_lock, flags);
-
-	pr_debug("mpic: allocated 0x%x (2^%d) at offset 0x%x\n",
-		 num, order, offset);
-
-	return offset;
-}
-
-void mpic_msi_free_hwirqs(struct mpic *mpic, int offset, int num)
-{
-	unsigned long flags;
-	int order = get_count_order(num);
-
-	pr_debug("mpic: freeing 0x%x (2^%d) at offset 0x%x\n",
-		 num, order, offset);
-
-	spin_lock_irqsave(&mpic->bitmap_lock, flags);
-	bitmap_release_region(mpic->hwirq_bitmap, offset, order);
-	spin_unlock_irqrestore(&mpic->bitmap_lock, flags);
+	msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, hwirq);
 }
 
 #ifdef CONFIG_MPIC_U3_HT_IRQS
@@ -83,13 +41,13 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
 
 	/* Reserve source numbers we know are reserved in the HW */
 	for (i = 0;   i < 8;   i++)
-		__mpic_msi_reserve_hwirq(mpic, i);
+		msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i);
 
 	for (i = 42;  i < 46;  i++)
-		__mpic_msi_reserve_hwirq(mpic, i);
+		msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i);
 
 	for (i = 100; i < 105; i++)
-		__mpic_msi_reserve_hwirq(mpic, i);
+		msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i);
 
 	np = NULL;
 	while ((np = of_find_all_nodes(np))) {
@@ -99,7 +57,7 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
 		while (of_irq_map_one(np, index++, &oirq) == 0) {
 			ops->xlate(mpic->irqhost, NULL, oirq.specifier,
 						oirq.size, &hwirq, &flags);
-			__mpic_msi_reserve_hwirq(mpic, hwirq);
+			msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, hwirq);
 		}
 	}
 
@@ -112,70 +70,25 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
 }
 #endif
 
-static int mpic_msi_reserve_dt_hwirqs(struct mpic *mpic)
-{
-	int i, len;
-	const u32 *p;
-
-	p = of_get_property(mpic->irqhost->of_node,
-			    "msi-available-ranges", &len);
-	if (!p) {
-		pr_debug("mpic: no msi-available-ranges property found on %s\n",
-			  mpic->irqhost->of_node->full_name);
-		return -ENODEV;
-	}
-
-	if (len % 8 != 0) {
-		printk(KERN_WARNING "mpic: Malformed msi-available-ranges "
-		       "property on %s\n", mpic->irqhost->of_node->full_name);
-		return -EINVAL;
-	}
-
-	bitmap_allocate_region(mpic->hwirq_bitmap, 0,
-			       get_count_order(mpic->irq_count));
-
-	/* Format is: (<u32 start> <u32 count>)+ */
-	len /= sizeof(u32);
-	for (i = 0; i < len / 2; i++, p += 2)
-		mpic_msi_free_hwirqs(mpic, *p, *(p + 1));
-
-	return 0;
-}
-
 int mpic_msi_init_allocator(struct mpic *mpic)
 {
-	int rc, size;
-
-	BUG_ON(mpic->hwirq_bitmap);
-	spin_lock_init(&mpic->bitmap_lock);
+	int rc;
 
-	size = BITS_TO_LONGS(mpic->irq_count) * sizeof(long);
-	pr_debug("mpic: allocator bitmap size is 0x%x bytes\n", size);
+	rc = msi_bitmap_alloc(&mpic->msi_bitmap, mpic->irq_count,
+			      mpic->irqhost->of_node);
+	if (rc)
+		return rc;
 
-	mpic->hwirq_bitmap = alloc_maybe_bootmem(size, GFP_KERNEL);
-
-	if (!mpic->hwirq_bitmap) {
-		pr_debug("mpic: ENOMEM allocating allocator bitmap!\n");
-		return -ENOMEM;
-	}
-
-	memset(mpic->hwirq_bitmap, 0, size);
-
-	rc = mpic_msi_reserve_dt_hwirqs(mpic);
-	if (rc) {
+	rc = msi_bitmap_reserve_dt_hwirqs(&mpic->msi_bitmap);
+	if (rc > 0) {
 		if (mpic->flags & MPIC_U3_HT_IRQS)
 			rc = mpic_msi_reserve_u3_hwirqs(mpic);
 
-		if (rc)
-			goto out_free;
+		if (rc) {
+			msi_bitmap_free(&mpic->msi_bitmap);
+			return rc;
+		}
 	}
 
 	return 0;
-
- out_free:
-	if (mem_init_done)
-		kfree(mpic->hwirq_bitmap);
-
-	mpic->hwirq_bitmap = NULL;
-	return rc;
 }
diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c
index 68aff60..656cb77 100644
--- a/arch/powerpc/sysdev/mpic_pasemi_msi.c
+++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c
@@ -22,6 +22,7 @@
 #include <asm/prom.h>
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
+#include <asm/msi_bitmap.h>
 
 #include "mpic.h"
 
@@ -81,8 +82,8 @@ static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev)
 			continue;
 
 		set_irq_msi(entry->irq, NULL);
-		mpic_msi_free_hwirqs(msi_mpic, virq_to_hw(entry->irq),
-				     ALLOC_CHUNK);
+		msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap,
+				       virq_to_hw(entry->irq), ALLOC_CHUNK);
 		irq_dispose_mapping(entry->irq);
 	}
 
@@ -91,11 +92,10 @@ static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev)
 
 static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
-	irq_hw_number_t hwirq;
 	unsigned int virq;
 	struct msi_desc *entry;
 	struct msi_msg msg;
-	int ret;
+	int hwirq;
 
 	pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
 		 pdev, nvec, type);
@@ -109,17 +109,19 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		 * few MSIs for someone, but restrictions will apply to how the
 		 * sources can be changed independently.
 		 */
-		ret = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
-		hwirq = ret;
-		if (ret < 0) {
+		hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap,
+						ALLOC_CHUNK);
+		if (hwirq < 0) {
 			pr_debug("pasemi_msi: failed allocating hwirq\n");
 			return hwirq;
 		}
 
 		virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
 		if (virq == NO_IRQ) {
-			pr_debug("pasemi_msi: failed mapping hwirq 0x%lx\n", hwirq);
-			mpic_msi_free_hwirqs(msi_mpic, hwirq, ALLOC_CHUNK);
+			pr_debug("pasemi_msi: failed mapping hwirq 0x%x\n",
+				  hwirq);
+			msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq,
+					       ALLOC_CHUNK);
 			return -ENOSPC;
 		}
 
@@ -133,8 +135,8 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		set_irq_chip(virq, &mpic_pasemi_msi_chip);
 		set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
 
-		pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%lx) addr 0x%x\n",
-			  virq, hwirq, msg.address_lo);
+		pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%x) " \
+			 "addr 0x%x\n", virq, hwirq, msg.address_lo);
 
 		/* Likewise, the device writes [0...511] into the target
 		 * register to generate MSI [512...1023]
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index 6e2f868..0a8f5a9 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -16,6 +16,7 @@
 #include <asm/prom.h>
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
+#include <asm/msi_bitmap.h>
 
 #include "mpic.h"
 
@@ -101,7 +102,8 @@ static void u3msi_teardown_msi_irqs(struct pci_dev *pdev)
 			continue;
 
 		set_irq_msi(entry->irq, NULL);
-		mpic_msi_free_hwirqs(msi_mpic, virq_to_hw(entry->irq), 1);
+		msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap,
+				       virq_to_hw(entry->irq), 1);
 		irq_dispose_mapping(entry->irq);
 	}
 
@@ -110,29 +112,27 @@ static void u3msi_teardown_msi_irqs(struct pci_dev *pdev)
 
 static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
-	irq_hw_number_t hwirq;
 	unsigned int virq;
 	struct msi_desc *entry;
 	struct msi_msg msg;
 	u64 addr;
-	int ret;
+	int hwirq;
 
 	addr = find_ht_magic_addr(pdev);
 	msg.address_lo = addr & 0xFFFFFFFF;
 	msg.address_hi = addr >> 32;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
-		ret = mpic_msi_alloc_hwirqs(msi_mpic, 1);
-		if (ret < 0) {
+		hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap, 1);
+		if (hwirq < 0) {
 			pr_debug("u3msi: failed allocating hwirq\n");
-			return ret;
+			return hwirq;
 		}
-		hwirq = ret;
 
 		virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
 		if (virq == NO_IRQ) {
-			pr_debug("u3msi: failed mapping hwirq 0x%lx\n", hwirq);
-			mpic_msi_free_hwirqs(msi_mpic, hwirq, 1);
+			pr_debug("u3msi: failed mapping hwirq 0x%x\n", hwirq);
+			msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, 1);
 			return -ENOSPC;
 		}
 
@@ -140,8 +140,8 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		set_irq_chip(virq, &mpic_u3msi_chip);
 		set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
 
-		pr_debug("u3msi: allocated virq 0x%x (hw 0x%lx) addr 0x%lx\n",
-			  virq, hwirq, addr);
+		pr_debug("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n",
+			  virq, hwirq, (unsigned long)addr);
 
 		msg.data = hwirq;
 		write_msi_msg(virq, &msg);
diff --git a/arch/powerpc/sysdev/msi_bitmap.c b/arch/powerpc/sysdev/msi_bitmap.c
new file mode 100644
index 0000000..f84217b
--- /dev/null
+++ b/arch/powerpc/sysdev/msi_bitmap.c
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2006-2008, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitmap.h>
+#include <asm/msi_bitmap.h>
+
+int msi_bitmap_alloc_hwirqs(struct msi_bitmap *bmp, int num)
+{
+	unsigned long flags;
+	int offset, order = get_count_order(num);
+
+	spin_lock_irqsave(&bmp->lock, flags);
+	/*
+	 * This is fast, but stricter than we need. We might want to add
+	 * a fallback routine which does a linear search with no alignment.
+	 */
+	offset = bitmap_find_free_region(bmp->bitmap, bmp->irq_count, order);
+	spin_unlock_irqrestore(&bmp->lock, flags);
+
+	pr_debug("msi_bitmap: allocated 0x%x (2^%d) at offset 0x%x\n",
+		 num, order, offset);
+
+	return offset;
+}
+
+void msi_bitmap_free_hwirqs(struct msi_bitmap *bmp, unsigned int offset,
+			    unsigned int num)
+{
+	unsigned long flags;
+	int order = get_count_order(num);
+
+	pr_debug("msi_bitmap: freeing 0x%x (2^%d) at offset 0x%x\n",
+		 num, order, offset);
+
+	spin_lock_irqsave(&bmp->lock, flags);
+	bitmap_release_region(bmp->bitmap, offset, order);
+	spin_unlock_irqrestore(&bmp->lock, flags);
+}
+
+void msi_bitmap_reserve_hwirq(struct msi_bitmap *bmp, unsigned int hwirq)
+{
+	unsigned long flags;
+
+	pr_debug("msi_bitmap: reserving hwirq 0x%x\n", hwirq);
+
+	spin_lock_irqsave(&bmp->lock, flags);
+	bitmap_allocate_region(bmp->bitmap, hwirq, 0);
+	spin_unlock_irqrestore(&bmp->lock, flags);
+}
+
+/**
+ * msi_bitmap_reserve_dt_hwirqs - Reserve irqs specified in the device tree.
+ * @bmp: pointer to the MSI bitmap.
+ *
+ * Looks in the device tree to see if there is a property specifying which
+ * irqs can be used for MSI. If found those irqs reserved in the device tree
+ * are reserved in the bitmap.
+ *
+ * Returns 0 for success, < 0 if there was an error, and > 0 if no property
+ * was found in the device tree.
+ **/
+int msi_bitmap_reserve_dt_hwirqs(struct msi_bitmap *bmp)
+{
+	int i, j, len;
+	const u32 *p;
+
+	if (!bmp->of_node)
+		return 1;
+
+	p = of_get_property(bmp->of_node, "msi-available-ranges", &len);
+	if (!p) {
+		pr_debug("msi_bitmap: no msi-available-ranges property " \
+			 "found on %s\n", bmp->of_node->full_name);
+		return 1;
+	}
+
+	if (len % (2 * sizeof(u32)) != 0) {
+		printk(KERN_WARNING "msi_bitmap: Malformed msi-available-ranges"
+		       " property on %s\n", bmp->of_node->full_name);
+		return -EINVAL;
+	}
+
+	bitmap_allocate_region(bmp->bitmap, 0, get_count_order(bmp->irq_count));
+
+	spin_lock(&bmp->lock);
+
+	/* Format is: (<u32 start> <u32 count>)+ */
+	len /= 2 * sizeof(u32);
+	for (i = 0; i < len; i++, p += 2) {
+		for (j = 0; j < *(p + 1); j++)
+			bitmap_release_region(bmp->bitmap, *p + j, 0);
+	}
+
+	spin_unlock(&bmp->lock);
+
+	return 0;
+}
+
+int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count,
+		     struct device_node *of_node)
+{
+	int size;
+
+	if (!irq_count)
+		return -EINVAL;
+
+	size = BITS_TO_LONGS(irq_count) * sizeof(long);
+	pr_debug("msi_bitmap: allocator bitmap size is 0x%x bytes\n", size);
+
+	bmp->bitmap = zalloc_maybe_bootmem(size, GFP_KERNEL);
+	if (!bmp->bitmap) {
+		pr_debug("msi_bitmap: ENOMEM allocating allocator bitmap!\n");
+		return -ENOMEM;
+	}
+
+	/* We zalloc'ed the bitmap, so all irqs are free by default */
+	spin_lock_init(&bmp->lock);
+	bmp->of_node = of_node_get(of_node);
+	bmp->irq_count = irq_count;
+
+	return 0;
+}
+
+void msi_bitmap_free(struct msi_bitmap *bmp)
+{
+	/* we can't free the bitmap we don't know if it's bootmem etc. */
+	of_node_put(bmp->of_node);
+	bmp->bitmap = NULL;
+}
+
+#ifdef CONFIG_MSI_BITMAP_SELFTEST
+
+#define check(x)	\
+	if (!(x)) printk("msi_bitmap: test failed at line %d\n", __LINE__);
+
+void test_basics(void)
+{
+	struct msi_bitmap bmp;
+	int i, size = 512;
+
+	/* Can't allocate a bitmap of 0 irqs */
+	check(msi_bitmap_alloc(&bmp, 0, NULL) != 0);
+
+	/* of_node may be NULL */
+	check(0 == msi_bitmap_alloc(&bmp, size, NULL));
+
+	/* Should all be free by default */
+	check(0 == bitmap_find_free_region(bmp.bitmap, size,
+					   get_count_order(size)));
+	bitmap_release_region(bmp.bitmap, 0, get_count_order(size));
+
+	/* With no node, there's no msi-available-ranges, so expect > 0 */
+	check(msi_bitmap_reserve_dt_hwirqs(&bmp) > 0);
+
+	/* Should all still be free */
+	check(0 == bitmap_find_free_region(bmp.bitmap, size,
+					   get_count_order(size)));
+	bitmap_release_region(bmp.bitmap, 0, get_count_order(size));
+
+	/* Check we can fill it up and then no more */
+	for (i = 0; i < size; i++)
+		check(msi_bitmap_alloc_hwirqs(&bmp, 1) >= 0);
+
+	check(msi_bitmap_alloc_hwirqs(&bmp, 1) < 0);
+
+	/* Should all be allocated */
+	check(bitmap_find_free_region(bmp.bitmap, size, 0) < 0);
+
+	/* And if we free one we can then allocate another */
+	msi_bitmap_free_hwirqs(&bmp, size / 2, 1);
+	check(msi_bitmap_alloc_hwirqs(&bmp, 1) == size / 2);
+
+	msi_bitmap_free(&bmp);
+
+	/* Clients may check bitmap == NULL for "not-allocated" */
+	check(bmp.bitmap == NULL);
+
+	kfree(bmp.bitmap);
+}
+
+void test_of_node(void)
+{
+	u32 prop_data[] = { 10, 10, 25, 3, 40, 1, 100, 100, 200, 20 };
+	const char *expected_str = "0-9,20-24,28-39,41-99,220-255";
+	char *prop_name = "msi-available-ranges";
+	char *node_name = "/fakenode";
+	struct device_node of_node;
+	struct property prop;
+	struct msi_bitmap bmp;
+	int size = 256;
+	DECLARE_BITMAP(expected, size);
+
+	/* There should really be a struct device_node allocator */
+	memset(&of_node, 0, sizeof(of_node));
+	kref_init(&of_node.kref);
+	of_node.full_name = node_name;
+
+	check(0 == msi_bitmap_alloc(&bmp, size, &of_node));
+
+	/* No msi-available-ranges, so expect > 0 */
+	check(msi_bitmap_reserve_dt_hwirqs(&bmp) > 0);
+
+	/* Should all still be free */
+	check(0 == bitmap_find_free_region(bmp.bitmap, size,
+					   get_count_order(size)));
+	bitmap_release_region(bmp.bitmap, 0, get_count_order(size));
+
+	/* Now create a fake msi-available-ranges property */
+
+	/* There should really .. oh whatever */
+	memset(&prop, 0, sizeof(prop));
+	prop.name = prop_name;
+	prop.value = &prop_data;
+	prop.length = sizeof(prop_data);
+
+	of_node.properties = &prop;
+
+	/* msi-available-ranges, so expect == 0 */
+	check(msi_bitmap_reserve_dt_hwirqs(&bmp) == 0);
+
+	/* Check we got the expected result */
+	check(0 == bitmap_parselist(expected_str, expected, size));
+	check(bitmap_equal(expected, bmp.bitmap, size));
+
+	msi_bitmap_free(&bmp);
+	kfree(bmp.bitmap);
+}
+
+int msi_bitmap_selftest(void)
+{
+	printk(KERN_DEBUG "Running MSI bitmap self-tests ...\n");
+
+	test_basics();
+	test_of_node();
+
+	return 0;
+}
+late_initcall(msi_bitmap_selftest);
+#endif /* CONFIG_MSI_BITMAP_SELFTEST */
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index 32e0ad0..b6bd775 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -293,10 +293,8 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id,
 		return -ENODEV;
 
 	prop = of_get_property(phy, "reg", NULL);
-	if (prop) {
-		pdata.force_phy_addr = 1;
-		pdata.phy_addr = *prop;
-	}
+	if (prop)
+		pdata.phy_addr = MV643XX_ETH_PHY_ADDR(*prop);
 
 	of_node_put(phy);
 
diff --git a/arch/powerpc/sysdev/ppc4xx_gpio.c b/arch/powerpc/sysdev/ppc4xx_gpio.c
new file mode 100644
index 0000000..110efe2
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_gpio.c
@@ -0,0 +1,217 @@
+/*
+ * PPC4xx gpio driver
+ *
+ * Copyright (c) 2008 Harris Corporation
+ * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Steve Falco <sfalco@harris.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/types.h>
+
+#define GPIO_MASK(gpio)		(0x80000000 >> (gpio))
+#define GPIO_MASK2(gpio)	(0xc0000000 >> ((gpio) * 2))
+
+/* Physical GPIO register layout */
+struct ppc4xx_gpio {
+	__be32 or;
+	__be32 tcr;
+	__be32 osrl;
+	__be32 osrh;
+	__be32 tsrl;
+	__be32 tsrh;
+	__be32 odr;
+	__be32 ir;
+	__be32 rr1;
+	__be32 rr2;
+	__be32 rr3;
+	__be32 reserved1;
+	__be32 isr1l;
+	__be32 isr1h;
+	__be32 isr2l;
+	__be32 isr2h;
+	__be32 isr3l;
+	__be32 isr3h;
+};
+
+struct ppc4xx_gpio_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+};
+
+/*
+ * GPIO LIB API implementation for GPIOs
+ *
+ * There are a maximum of 32 gpios in each gpio controller.
+ */
+
+static inline struct ppc4xx_gpio_chip *
+to_ppc4xx_gpiochip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct ppc4xx_gpio_chip, mm_gc);
+}
+
+static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+	return in_be32(&regs->ir) & GPIO_MASK(gpio);
+}
+
+static inline void
+__ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+	if (val)
+		setbits32(&regs->or, GPIO_MASK(gpio));
+	else
+		clrbits32(&regs->or, GPIO_MASK(gpio));
+}
+
+static void
+ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	__ppc4xx_gpio_set(gc, gpio, val);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+}
+
+static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	/* Disable open-drain function */
+	clrbits32(&regs->odr, GPIO_MASK(gpio));
+
+	/* Float the pin */
+	clrbits32(&regs->tcr, GPIO_MASK(gpio));
+
+	/* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
+	if (gpio < 16) {
+		clrbits32(&regs->osrl, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrl, GPIO_MASK2(gpio));
+	} else {
+		clrbits32(&regs->osrh, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
+	}
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int
+ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	/* First set initial value */
+	__ppc4xx_gpio_set(gc, gpio, val);
+
+	/* Disable open-drain function */
+	clrbits32(&regs->odr, GPIO_MASK(gpio));
+
+	/* Drive the pin */
+	setbits32(&regs->tcr, GPIO_MASK(gpio));
+
+	/* Bits 0-15 use TSRL, bits 16-31 use TSRH */
+	if (gpio < 16) {
+		clrbits32(&regs->osrl, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrl, GPIO_MASK2(gpio));
+	} else {
+		clrbits32(&regs->osrh, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
+	}
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+	return 0;
+}
+
+static int __init ppc4xx_add_gpiochips(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "ibm,ppc4xx-gpio") {
+		int ret;
+		struct ppc4xx_gpio_chip *ppc4xx_gc;
+		struct of_mm_gpio_chip *mm_gc;
+		struct of_gpio_chip *of_gc;
+		struct gpio_chip *gc;
+
+		ppc4xx_gc = kzalloc(sizeof(*ppc4xx_gc), GFP_KERNEL);
+		if (!ppc4xx_gc) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		spin_lock_init(&ppc4xx_gc->lock);
+
+		mm_gc = &ppc4xx_gc->mm_gc;
+		of_gc = &mm_gc->of_gc;
+		gc = &of_gc->gc;
+
+		of_gc->gpio_cells = 2;
+		gc->ngpio = 32;
+		gc->direction_input = ppc4xx_gpio_dir_in;
+		gc->direction_output = ppc4xx_gpio_dir_out;
+		gc->get = ppc4xx_gpio_get;
+		gc->set = ppc4xx_gpio_set;
+
+		ret = of_mm_gpiochip_add(np, mm_gc);
+		if (ret)
+			goto err;
+		continue;
+err:
+		pr_err("%s: registration failed with status %d\n",
+		       np->full_name, ret);
+		kfree(ppc4xx_gc);
+		/* try others anyway */
+	}
+	return 0;
+}
+arch_initcall(ppc4xx_add_gpiochips);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index fb368df..d3e4d61 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -30,24 +30,19 @@
 #include <asm/machdep.h>
 #include <asm/dcr.h>
 #include <asm/dcr-regs.h>
+#include <mm/mmu_decl.h>
 
 #include "ppc4xx_pci.h"
 
 static int dma_offset_set;
 
-/* Move that to a useable header */
-extern unsigned long total_memory;
-
 #define U64_TO_U32_LOW(val)	((u32)((val) & 0x00000000ffffffffULL))
 #define U64_TO_U32_HIGH(val)	((u32)((val) >> 32))
 
-#ifdef CONFIG_RESOURCES_64BIT
-#define RES_TO_U32_LOW(val)	U64_TO_U32_LOW(val)
-#define RES_TO_U32_HIGH(val)	U64_TO_U32_HIGH(val)
-#else
-#define RES_TO_U32_LOW(val)	(val)
-#define RES_TO_U32_HIGH(val)	(0)
-#endif
+#define RES_TO_U32_LOW(val)	\
+	((sizeof(resource_size_t) > sizeof(u32)) ? U64_TO_U32_LOW(val) : (val))
+#define RES_TO_U32_HIGH(val)	\
+	((sizeof(resource_size_t) > sizeof(u32)) ? U64_TO_U32_HIGH(val) : (0))
 
 static inline int ppc440spe_revA(void)
 {
@@ -105,7 +100,8 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
 
 	/* Default */
 	res->start = 0;
-	res->end = size = 0x80000000;
+	size = 0x80000000;
+	res->end = size - 1;
 	res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
 
 	/* Get dma-ranges property */
@@ -145,12 +141,11 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
 
 		/* Use that */
 		res->start = pci_addr;
-#ifndef CONFIG_RESOURCES_64BIT
 		/* Beware of 32 bits resources */
-		if ((pci_addr + size) > 0x100000000ull)
+		if (sizeof(resource_size_t) == sizeof(u32) &&
+		    (pci_addr + size) > 0x100000000ull)
 			res->end = 0xffffffff;
 		else
-#endif
 			res->end = res->start + size - 1;
 		break;
 	}
@@ -167,13 +162,13 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
 	 */
 	if (size < total_memory) {
 		printk(KERN_ERR "%s: dma-ranges too small "
-		       "(size=%llx total_memory=%lx)\n",
-		       hose->dn->full_name, size, total_memory);
+		       "(size=%llx total_memory=%llx)\n",
+		       hose->dn->full_name, size, (u64)total_memory);
 		return -ENXIO;
 	}
 
 	/* Check we are a power of 2 size and that base is a multiple of size*/
-	if (!is_power_of_2(size) ||
+	if ((size & (size - 1)) != 0  ||
 	    (res->start & (size - 1)) != 0) {
 		printk(KERN_ERR "%s: dma-ranges unaligned\n",
 		       hose->dn->full_name);
@@ -277,9 +272,16 @@ static void __init ppc4xx_probe_pci_bridge(struct device_node *np)
 	const int *bus_range;
 	int primary = 0;
 
+	/* Check if device is enabled */
+	if (!of_device_is_available(np)) {
+		printk(KERN_INFO "%s: Port disabled via device-tree\n",
+		       np->full_name);
+		return;
+	}
+
 	/* Fetch config space registers address */
 	if (of_address_to_resource(np, 0, &rsrc_cfg)) {
-		printk(KERN_ERR "%s:Can't get PCI config register base !",
+		printk(KERN_ERR "%s: Can't get PCI config register base !",
 		       np->full_name);
 		return;
 	}
@@ -810,7 +812,7 @@ static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 	switch (port->index) {
 	case 0:
 		mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
-		mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136);
+		mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
 		mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
 
 		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000);
@@ -821,10 +823,10 @@ static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 		mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
 		mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
 		mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
-		mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136);
-		mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136);
-		mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136);
-		mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136);
+		mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000130);
+		mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000130);
+		mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000130);
+		mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000130);
 		mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
 		mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
 		mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 1ce5464..76ffbc4 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -24,12 +24,3 @@ config QE_USB
 	bool
 	help
 	  QE USB Host Controller support
-
-config QE_GPIO
-	bool "QE GPIO support"
-	depends on QUICC_ENGINE
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Say Y here if you're going to use hardware that connects to the
-	  QE GPIOs.
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 8d41908..70b7645 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -74,9 +74,12 @@ config S390
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_KVM if 64BIT
+	select HAVE_ARCH_TRACEHOOK
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "Base setup"
 
 comment "Processor type and features"
@@ -564,13 +567,16 @@ config ZFCPDUMP
 	  Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
 
 config S390_GUEST
-bool "s390 guest support (EXPERIMENTAL)"
+bool "s390 guest support for KVM (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
 	select VIRTIO
 	select VIRTIO_RING
 	select VIRTIO_CONSOLE
 	help
-	  Select this option if you want to run the kernel under s390 linux
+	  Select this option if you want to run the kernel as a guest under
+	  the KVM hypervisor. This will add detection for KVM as well  as a
+	  virtio transport. If KVM is detected, the virtio console will be
+	  the default console.
 endmenu
 
 source "net/Kconfig"
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 7383781..3631380 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -219,7 +219,7 @@ static int hypfs_release(struct inode *inode, struct file *filp)
 
 enum { opt_uid, opt_gid, opt_err };
 
-static match_table_t hypfs_tokens = {
+static const match_table_t hypfs_tokens = {
 	{opt_uid, "uid=%u"},
 	{opt_gid, "gid=%u"},
 	{opt_err, NULL}
diff --git a/arch/s390/include/asm/dasd.h b/arch/s390/include/asm/dasd.h
index 3f002e1..55b2b80 100644
--- a/arch/s390/include/asm/dasd.h
+++ b/arch/s390/include/asm/dasd.h
@@ -3,6 +3,8 @@
  * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
  * Bugreports.to..: <Linux390@de.ibm.com>
  * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
+ * EMC Symmetrix ioctl Copyright EMC Corporation, 2008
+ * Author.........: Nigel Hislop <hislop_nigel@emc.com>
  *
  * This file is the interface of the DASD device driver, which is exported to user space
  * any future changes wrt the API will result in a change of the APIVERSION reported
@@ -202,6 +204,16 @@ typedef struct attrib_data_t {
 #define DASD_SEQ_PRESTAGE  0x4
 #define DASD_REC_ACCESS    0x5
 
+/*
+ * Perform EMC Symmetrix I/O
+ */
+typedef struct dasd_symmio_parms {
+	unsigned char reserved[8];	/* compat with older releases */
+	unsigned long long psf_data;	/* char * cast to u64 */
+	unsigned long long rssd_result; /* char * cast to u64 */
+	int psf_data_len;
+	int rssd_result_len;
+} __attribute__ ((packed)) dasd_symmio_parms_t;
 
 /********************************************************************************
  * SECTION: Definition of IOCTLs
@@ -247,6 +259,7 @@ typedef struct attrib_data_t {
 /* Set Attributes (cache operations) */
 #define BIODASDSATTR   _IOW(DASD_IOCTL_LETTER,2,attrib_data_t) 
 
+#define BIODASDSYMMIO  _IOWR(DASD_IOCTL_LETTER, 240, dasd_symmio_parms_t)
 
 #endif				/* DASD_H */
 
diff --git a/arch/s390/include/asm/delay.h b/arch/s390/include/asm/delay.h
index 7835731..a356c95 100644
--- a/arch/s390/include/asm/delay.h
+++ b/arch/s390/include/asm/delay.h
@@ -15,6 +15,7 @@
 #define _S390_DELAY_H
 
 extern void __udelay(unsigned long usecs);
+extern void udelay_simple(unsigned long usecs);
 extern void __delay(unsigned long loops);
 
 #define udelay(n) __udelay(n)
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index 3cad569..261785a 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -166,13 +166,11 @@ extern char elf_platform[];
 #define ELF_PLATFORM (elf_platform)
 
 #ifndef __s390x__
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
 #else /* __s390x__ */
-#define SET_PERSONALITY(ex, ibcs2)			\
+#define SET_PERSONALITY(ex)				\
 do {							\
-	if (ibcs2)					\
-		set_personality(PER_SVR4);		\
-	else if (current->personality != PER_LINUX32)	\
+	if (current->personality != PER_LINUX32)	\
 		set_personality(PER_LINUX);		\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
 		set_thread_flag(TIF_31BIT);		\
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 0bdb704..1a928f8 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -281,6 +281,9 @@ extern char empty_zero_page[PAGE_SIZE];
 #define RCP_GR_BIT	50
 #define RCP_GC_BIT	49
 
+/* User dirty bit for KVM's migration feature */
+#define KVM_UD_BIT	47
+
 #ifndef __s390x__
 
 /* Bits in the segment table address-space-control-element */
@@ -575,12 +578,16 @@ static inline void ptep_rcp_copy(pte_t *ptep)
 	unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
 
 	skey = page_get_storage_key(page_to_phys(page));
-	if (skey & _PAGE_CHANGED)
+	if (skey & _PAGE_CHANGED) {
 		set_bit_simple(RCP_GC_BIT, pgste);
+		set_bit_simple(KVM_UD_BIT, pgste);
+	}
 	if (skey & _PAGE_REFERENCED)
 		set_bit_simple(RCP_GR_BIT, pgste);
-	if (test_and_clear_bit_simple(RCP_HC_BIT, pgste))
+	if (test_and_clear_bit_simple(RCP_HC_BIT, pgste)) {
 		SetPageDirty(page);
+		set_bit_simple(KVM_UD_BIT, pgste);
+	}
 	if (test_and_clear_bit_simple(RCP_HR_BIT, pgste))
 		SetPageReferenced(page);
 #endif
@@ -744,6 +751,40 @@ static inline pte_t pte_mkspecial(pte_t pte)
 	return pte;
 }
 
+#ifdef CONFIG_PGSTE
+/*
+ * Get (and clear) the user dirty bit for a PTE.
+ */
+static inline int kvm_s390_test_and_clear_page_dirty(struct mm_struct *mm,
+						     pte_t *ptep)
+{
+	int dirty;
+	unsigned long *pgste;
+	struct page *page;
+	unsigned int skey;
+
+	if (!mm->context.pgstes)
+		return -EINVAL;
+	rcp_lock(ptep);
+	pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
+	page = virt_to_page(pte_val(*ptep));
+	skey = page_get_storage_key(page_to_phys(page));
+	if (skey & _PAGE_CHANGED) {
+		set_bit_simple(RCP_GC_BIT, pgste);
+		set_bit_simple(KVM_UD_BIT, pgste);
+	}
+	if (test_and_clear_bit_simple(RCP_HC_BIT, pgste)) {
+		SetPageDirty(page);
+		set_bit_simple(KVM_UD_BIT, pgste);
+	}
+	dirty = test_and_clear_bit_simple(KVM_UD_BIT, pgste);
+	if (skey & _PAGE_CHANGED)
+		page_clear_dirty(page);
+	rcp_unlock(ptep);
+	return dirty;
+}
+#endif
+
 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
 static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
 					    unsigned long addr, pte_t *ptep)
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index af2c9ac..a7226f8 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -490,6 +490,7 @@ extern void user_disable_single_step(struct task_struct *);
 
 #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
 #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
+#define user_stack_pointer(regs)((regs)->gprs[15])
 #define regs_return_value(regs)((regs)->gprs[2])
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs * regs);
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index 6813772..4734c3f 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -299,7 +299,13 @@ struct qdio_ssqd_desc {
 	u8 mbccnt;
 	u16 qdioac2;
 	u64 sch_token;
-	u64:64;
+	u8 mro;
+	u8 mri;
+	u8:8;
+	u8 sbalic;
+	u16:16;
+	u8:8;
+	u8 mmwc;
 } __attribute__ ((packed));
 
 /* params are: ccw_device, qdio_error, queue_number,
diff --git a/arch/s390/include/asm/statfs.h b/arch/s390/include/asm/statfs.h
index 099a455..06cc703 100644
--- a/arch/s390/include/asm/statfs.h
+++ b/arch/s390/include/asm/statfs.h
@@ -12,19 +12,16 @@
 #ifndef __s390x__
 #include <asm-generic/statfs.h>
 #else
+/*
+ * We can't use <asm-generic/statfs.h> because in 64-bit mode
+ * we mix ints of different sizes in our struct statfs.
+ */
 
 #ifndef __KERNEL_STRICT_NAMES
-
 #include <linux/types.h>
-
 typedef __kernel_fsid_t	fsid_t;
-
 #endif
 
-/*
- * This is ugly -- we're already 64-bit clean, so just duplicate the 
- * definitions.
- */
 struct statfs {
 	int  f_type;
 	int  f_bsize;
diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h
new file mode 100644
index 0000000..6e62397
--- /dev/null
+++ b/arch/s390/include/asm/syscall.h
@@ -0,0 +1,80 @@
+/*
+ * Access to user system call parameters and results
+ *
+ *  Copyright IBM Corp. 2008
+ *  Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+#include <asm/ptrace.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	if (regs->trap != __LC_SVC_OLD_PSW)
+		return -1;
+	return regs->gprs[2];
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->gprs[2] = regs->orig_gpr2;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return (regs->gprs[2] >= -4096UL) ? -regs->gprs[2] : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->gprs[2];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->gprs[2] = error ? -error : val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+#ifdef CONFIG_COMPAT
+	if (test_tsk_thread_flag(task, TIF_31BIT)) {
+		if (i + n == 6)
+			args[--n] = (u32) regs->args[0];
+		while (n-- > 0)
+			args[n] = (u32) regs->gprs[2 + i + n];
+	}
+#endif
+	if (i + n == 6)
+		args[--n] = regs->args[0];
+	memcpy(args, &regs->gprs[2 + i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	if (i + n == 6)
+		regs->args[0] = args[--n];
+	memcpy(&regs->gprs[2 + i], args, n * sizeof(args[0]));
+}
+
+#endif	/* _ASM_SYSCALL_H */
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 91a8f93..de3fad6 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -86,6 +86,7 @@ static inline struct thread_info *current_thread_info(void)
  * thread information flags bit numbers
  */
 #define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_RESTART_SVC		4	/* restart svc with new svc number */
@@ -98,8 +99,10 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_31BIT		18	/* 32bit process */ 
 #define TIF_MEMDIE		19
 #define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
+#define TIF_FREEZE		21	/* thread is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
@@ -110,6 +113,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_31BIT		(1<<TIF_31BIT)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index d7f2222..4646382 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -279,22 +279,6 @@ asmlinkage long sys32_getegid16(void)
 	return high2lowgid(current->egid);
 }
 
-/* 32-bit timeval and related flotsam.  */
-
-static inline long get_tv32(struct timeval *o, struct compat_timeval __user *i)
-{
-	return (!access_ok(VERIFY_READ, o, sizeof(*o)) ||
-		(__get_user(o->tv_sec, &i->tv_sec) ||
-		 __get_user(o->tv_usec, &i->tv_usec)));
-}
-
-static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
-{
-	return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
-		(__put_user(i->tv_sec, &o->tv_sec) ||
-		 __put_user(i->tv_usec, &o->tv_usec)));
-}
-
 /*
  * sys32_ipc() is the de-multiplexer for the SysV IPC calls in 32bit emulation.
  *
@@ -362,41 +346,6 @@ asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long high, unsigned
 		return sys_ftruncate(fd, (high << 32) | low);
 }
 
-int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
-{
-	compat_ino_t ino;
-	int err;
-
-	if (!old_valid_dev(stat->dev) || !old_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-
-	ino = stat->ino;
-	if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino)
-		return -EOVERFLOW;
-
-	err = put_user(old_encode_dev(stat->dev), &statbuf->st_dev);
-	err |= put_user(stat->ino, &statbuf->st_ino);
-	err |= put_user(stat->mode, &statbuf->st_mode);
-	err |= put_user(stat->nlink, &statbuf->st_nlink);
-	err |= put_user(high2lowuid(stat->uid), &statbuf->st_uid);
-	err |= put_user(high2lowgid(stat->gid), &statbuf->st_gid);
-	err |= put_user(old_encode_dev(stat->rdev), &statbuf->st_rdev);
-	err |= put_user(stat->size, &statbuf->st_size);
-	err |= put_user(stat->atime.tv_sec, &statbuf->st_atime);
-	err |= put_user(stat->atime.tv_nsec, &statbuf->st_atime_nsec);
-	err |= put_user(stat->mtime.tv_sec, &statbuf->st_mtime);
-	err |= put_user(stat->mtime.tv_nsec, &statbuf->st_mtime_nsec);
-	err |= put_user(stat->ctime.tv_sec, &statbuf->st_ctime);
-	err |= put_user(stat->ctime.tv_nsec, &statbuf->st_ctime_nsec);
-	err |= put_user(stat->blksize, &statbuf->st_blksize);
-	err |= put_user(stat->blocks, &statbuf->st_blocks);
-/* fixme
-	err |= put_user(0, &statbuf->__unused4[0]);
-	err |= put_user(0, &statbuf->__unused4[1]);
-*/
-	return err;
-}
-
 asmlinkage long sys32_sched_rr_get_interval(compat_pid_t pid,
 				struct compat_timespec __user *interval)
 {
@@ -557,65 +506,6 @@ sys32_delete_module(const char __user *name_user, unsigned int flags)
 
 #endif  /* CONFIG_MODULES */
 
-/* Translations due to time_t size differences.  Which affects all
-   sorts of things, like timeval and itimerval.  */
-
-extern struct timezone sys_tz;
-
-asmlinkage long sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
-{
-	if (tv) {
-		struct timeval ktv;
-		do_gettimeofday(&ktv);
-		if (put_tv32(tv, &ktv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
-{
-	long usec;
-
-	if (!access_ok(VERIFY_READ, i, sizeof(*i)))
-		return -EFAULT;
-	if (__get_user(o->tv_sec, &i->tv_sec))
-		return -EFAULT;
-	if (__get_user(usec, &i->tv_usec))
-		return -EFAULT;
-	o->tv_nsec = usec * 1000;
-	return 0;
-}
-
-asmlinkage long sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
-{
-	struct timespec kts;
-	struct timezone ktz;
-
- 	if (tv) {
-		if (get_ts32(&kts, tv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_from_user(&ktz, tz, sizeof(ktz)))
-			return -EFAULT;
-	}
-
-	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
-}
-
-/* These are here just in case some old sparc32 binary calls it. */
-asmlinkage long sys32_pause(void)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	return -ERESTARTNOHAND;
-}
-
 asmlinkage long sys32_pread64(unsigned int fd, char __user *ubuf,
 				size_t count, u32 poshi, u32 poslo)
 {
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index 20723a0..836a288 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -202,11 +202,6 @@ long sys32_execve(void);
 long sys32_init_module(void __user *umod, unsigned long len,
 		       const char __user *uargs);
 long sys32_delete_module(const char __user *name_user, unsigned int flags);
-long sys32_gettimeofday(struct compat_timeval __user *tv,
-			struct timezone __user *tz);
-long sys32_settimeofday(struct compat_timeval __user *tv,
-			struct timezone __user *tz);
-long sys32_pause(void);
 long sys32_pread64(unsigned int fd, char __user *ubuf, size_t count,
 		   u32 poshi, u32 poslo);
 long sys32_pwrite64(unsigned int fd, const char __user *ubuf,
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 328a20e..fc2c971 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -128,8 +128,6 @@ sys32_alarm_wrapper:
 	llgfr	%r2,%r2			# unsigned int
 	jg	sys_alarm		# branch to system call
 
-#sys32_pause_wrapper			# void
-
 	.globl	compat_sys_utime_wrapper
 compat_sys_utime_wrapper:
 	llgtr	%r2,%r2			# char *
@@ -334,17 +332,17 @@ compat_sys_getrusage_wrapper:
 	llgtr	%r3,%r3			# struct rusage_emu31 *
 	jg	compat_sys_getrusage	# branch to system call
 
-	.globl	sys32_gettimeofday_wrapper
-sys32_gettimeofday_wrapper:
+	.globl	compat_sys_gettimeofday_wrapper
+compat_sys_gettimeofday_wrapper:
 	llgtr	%r2,%r2			# struct timeval_emu31 *
 	llgtr	%r3,%r3			# struct timezone *
-	jg	sys32_gettimeofday	# branch to system call
+	jg	compat_sys_gettimeofday	# branch to system call
 
-	.globl	sys32_settimeofday_wrapper
-sys32_settimeofday_wrapper:
+	.globl	compat_sys_settimeofday_wrapper
+compat_sys_settimeofday_wrapper:
 	llgtr	%r2,%r2			# struct timeval_emu31 *
 	llgtr	%r3,%r3			# struct timezone *
-	jg	sys32_settimeofday	# branch to system call
+	jg	compat_sys_settimeofday	# branch to system call
 
 	.globl	sys32_getgroups16_wrapper
 sys32_getgroups16_wrapper:
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 708cf9c..ed500ef 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -49,9 +49,9 @@ SP_ILC	     =	STACK_FRAME_OVERHEAD + __PT_ILC
 SP_TRAP      =	STACK_FRAME_OVERHEAD + __PT_TRAP
 SP_SIZE      =	STACK_FRAME_OVERHEAD + __PT_SIZE
 
-_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
-_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING)
 
 STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
@@ -318,6 +318,8 @@ sysc_work:
 	bo	BASED(sysc_reschedule)
 	tm	__TI_flags+3(%r9),_TIF_SIGPENDING
 	bnz	BASED(sysc_sigpending)
+	tm	__TI_flags+3(%r9),_TIF_NOTIFY_RESUME
+	bnz	BASED(sysc_notify_resume)
 	tm	__TI_flags+3(%r9),_TIF_RESTART_SVC
 	bo	BASED(sysc_restart)
 	tm	__TI_flags+3(%r9),_TIF_SINGLE_STEP
@@ -356,6 +358,16 @@ sysc_sigpending:
 	b	BASED(sysc_work_loop)
 
 #
+# _TIF_NOTIFY_RESUME is set, call do_notify_resume
+#
+sysc_notify_resume:
+	la	%r2,SP_PTREGS(%r15)	# load pt_regs
+	l	%r1,BASED(.Ldo_notify_resume)
+	la	%r14,BASED(sysc_work_loop)
+	br	%r1			# call do_notify_resume
+
+
+#
 # _TIF_RESTART_SVC is set, set up registers and restart svc
 #
 sysc_restart:
@@ -378,20 +390,21 @@ sysc_singlestep:
 	br	%r1			# branch to do_single_step
 
 #
-# call trace before and after sys_call
+# call tracehook_report_syscall_entry/tracehook_report_syscall_exit before
+# and after the system call
 #
 sysc_tracesys:
-	l	%r1,BASED(.Ltrace)
+	l	%r1,BASED(.Ltrace_entry)
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	la	%r3,0
 	srl	%r7,2
 	st	%r7,SP_R2(%r15)
 	basr	%r14,%r1
-	clc	SP_R2(4,%r15),BASED(.Lnr_syscalls)
+	cl	%r2,BASED(.Lnr_syscalls)
 	bnl	BASED(sysc_tracenogo)
 	l	%r8,BASED(.Lsysc_table)
-	l	%r7,SP_R2(%r15) 	# strace might have changed the
-	sll	%r7,2			#  system call
+	lr	%r7,%r2
+	sll	%r7,2			# *4
 	l	%r8,0(%r7,%r8)
 sysc_tracego:
 	lm	%r3,%r6,SP_R3(%r15)
@@ -401,9 +414,8 @@ sysc_tracego:
 sysc_tracenogo:
 	tm	__TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
 	bz	BASED(sysc_return)
-	l	%r1,BASED(.Ltrace)
+	l	%r1,BASED(.Ltrace_exit)
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	la	%r3,1
 	la	%r14,BASED(sysc_return)
 	br	%r1
 
@@ -666,6 +678,8 @@ io_work_loop:
 	bo	BASED(io_reschedule)
 	tm	__TI_flags+3(%r9),_TIF_SIGPENDING
 	bnz	BASED(io_sigpending)
+	tm	__TI_flags+3(%r9),_TIF_NOTIFY_RESUME
+	bnz	BASED(io_notify_resume)
 	b	BASED(io_restore)
 io_work_done:
 
@@ -704,6 +718,19 @@ io_sigpending:
 	TRACE_IRQS_OFF
 	b	BASED(io_work_loop)
 
+#
+# _TIF_SIGPENDING is set, call do_signal
+#
+io_notify_resume:
+	TRACE_IRQS_ON
+	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	la	%r2,SP_PTREGS(%r15)	# load pt_regs
+	l	%r1,BASED(.Ldo_notify_resume)
+	basr	%r14,%r1		# call do_signal
+	stnsm	__SF_EMPTY(%r15),0xfc	# disable I/O and ext. interrupts
+	TRACE_IRQS_OFF
+	b	BASED(io_work_loop)
+
 /*
  * External interrupt handler routine
  */
@@ -1070,6 +1097,8 @@ cleanup_io_leave_insn:
 .Ldo_IRQ:	.long	do_IRQ
 .Ldo_extint:	.long	do_extint
 .Ldo_signal:	.long	do_signal
+.Ldo_notify_resume:
+		.long	do_notify_resume
 .Lhandle_per:	.long	do_single_step
 .Ldo_execve:	.long	do_execve
 .Lexecve_tail:	.long	execve_tail
@@ -1079,7 +1108,8 @@ cleanup_io_leave_insn:
 .Lpreempt_schedule_irq:
 		.long	preempt_schedule_irq
 #endif
-.Ltrace:	.long	syscall_trace
+.Ltrace_entry:	.long	do_syscall_trace_enter
+.Ltrace_exit:	.long	do_syscall_trace_exit
 .Lschedtail:	.long	schedule_tail
 .Lsysc_table:	.long	sys_call_table
 #ifdef CONFIG_TRACE_IRQFLAGS
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index fee1017..d7ce150 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -52,9 +52,9 @@ SP_SIZE      =	STACK_FRAME_OVERHEAD + __PT_SIZE
 STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
 STACK_SIZE  = 1 << STACK_SHIFT
 
-_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
-_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING)
 
 #define BASED(name) name-system_call(%r13)
@@ -310,6 +310,8 @@ sysc_work:
 	jo	sysc_reschedule
 	tm	__TI_flags+7(%r9),_TIF_SIGPENDING
 	jnz	sysc_sigpending
+	tm	__TI_flags+7(%r9),_TIF_NOTIFY_RESUME
+	jnz	sysc_notify_resume
 	tm	__TI_flags+7(%r9),_TIF_RESTART_SVC
 	jo	sysc_restart
 	tm	__TI_flags+7(%r9),_TIF_SINGLE_STEP
@@ -345,6 +347,14 @@ sysc_sigpending:
 	j	sysc_work_loop
 
 #
+# _TIF_NOTIFY_RESUME is set, call do_notify_resume
+#
+sysc_notify_resume:
+	la	%r2,SP_PTREGS(%r15)	# load pt_regs
+	larl	%r14,sysc_work_loop
+	jg	do_notify_resume	# call do_notify_resume
+
+#
 # _TIF_RESTART_SVC is set, set up registers and restart svc
 #
 sysc_restart:
@@ -367,20 +377,19 @@ sysc_singlestep:
 	jg	do_single_step		# branch to do_sigtrap
 
 #
-# call syscall_trace before and after system call
-# special linkage: %r12 contains the return address for trace_svc
+# call tracehook_report_syscall_entry/tracehook_report_syscall_exit before
+# and after the system call
 #
 sysc_tracesys:
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	la	%r3,0
 	srl	%r7,2
 	stg	%r7,SP_R2(%r15)
-	brasl	%r14,syscall_trace
+	brasl	%r14,do_syscall_trace_enter
 	lghi	%r0,NR_syscalls
-	clg	%r0,SP_R2(%r15)
+	clgr	%r0,%r2
 	jnh	sysc_tracenogo
-	lg	%r7,SP_R2(%r15)		# strace might have changed the
-	sll	%r7,2			# system call
+	slag	%r7,%r2,2		# *4
 	lgf	%r8,0(%r7,%r10)
 sysc_tracego:
 	lmg	%r3,%r6,SP_R3(%r15)
@@ -391,9 +400,8 @@ sysc_tracenogo:
 	tm	__TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
 	jz	sysc_return
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	la	%r3,1
 	larl	%r14,sysc_return	# return point is sysc_return
-	jg	syscall_trace
+	jg	do_syscall_trace_exit
 
 #
 # a new process exits the kernel with ret_from_fork
@@ -672,6 +680,8 @@ io_work_loop:
 	jo	io_reschedule
 	tm	__TI_flags+7(%r9),_TIF_SIGPENDING
 	jnz	io_sigpending
+	tm	__TI_flags+7(%r9),_TIF_NOTIFY_RESUME
+	jnz	io_notify_resume
 	j	io_restore
 io_work_done:
 
@@ -712,6 +722,18 @@ io_sigpending:
 	TRACE_IRQS_OFF
 	j	io_work_loop
 
+#
+# _TIF_NOTIFY_RESUME or is set, call do_notify_resume
+#
+io_notify_resume:
+	TRACE_IRQS_ON
+	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	la	%r2,SP_PTREGS(%r15)	# load pt_regs
+	brasl	%r14,do_notify_resume	# call do_notify_resume
+	stnsm	__SF_EMPTY(%r15),0xfc	# disable I/O and ext. interrupts
+	TRACE_IRQS_OFF
+	j	io_work_loop
+
 /*
  * External interrupt handler routine
  */
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index c8b0828..1f31be1 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -35,6 +35,7 @@
 #include <linux/signal.h>
 #include <linux/elf.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 
 #include <asm/segment.h>
 #include <asm/page.h>
@@ -639,40 +640,44 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 }
 #endif
 
-asmlinkage void
-syscall_trace(struct pt_regs *regs, int entryexit)
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]), regs->gprs[2]);
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		goto out;
-	if (!(current->ptrace & PT_PTRACED))
-		goto out;
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
+	long ret;
 
 	/*
-	 * If the debuffer has set an invalid system call number,
-	 * we prepare to skip the system call restart handling.
+	 * The sysc_tracesys code in entry.S stored the system
+	 * call number to gprs[2].
 	 */
-	if (!entryexit && regs->gprs[2] >= NR_syscalls)
+	ret = regs->gprs[2];
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    (tracehook_report_syscall_entry(regs) ||
+	     regs->gprs[2] >= NR_syscalls)) {
+		/*
+		 * Tracing decided this syscall should not happen or the
+		 * debugger stored an invalid system call number. Skip
+		 * the system call and the system call restart handling.
+		 */
 		regs->trap = -1;
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
+		ret = -1;
 	}
- out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(test_thread_flag(TIF_31BIT)?AUDIT_ARCH_S390:AUDIT_ARCH_S390X,
-				    regs->gprs[2], regs->orig_gpr2, regs->gprs[3],
-				    regs->gprs[4], regs->gprs[5]);
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(test_thread_flag(TIF_31BIT) ?
+					AUDIT_ARCH_S390 : AUDIT_ARCH_S390X,
+				    regs->gprs[2], regs->orig_gpr2,
+				    regs->gprs[3], regs->gprs[4],
+				    regs->gprs[5]);
+	return ret;
+}
+
+asmlinkage void do_syscall_trace_exit(struct pt_regs *regs)
+{
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]),
+				   regs->gprs[2]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, 0);
 }
 
 /*
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index b976820..4f7fc30 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -24,6 +24,7 @@
 #include <linux/tty.h>
 #include <linux/personality.h>
 #include <linux/binfmts.h>
+#include <linux/tracehook.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/lowcore.h>
@@ -507,6 +508,12 @@ void do_signal(struct pt_regs *regs)
 			 */
 			if (current->thread.per_info.single_step)
 				set_thread_flag(TIF_SINGLE_STEP);
+
+			/*
+			 * Let tracing know that we've done the handler setup.
+			 */
+			tracehook_signal_handler(signr, &info, &ka, regs,
+					 test_thread_flag(TIF_SINGLE_STEP));
 		}
 		return;
 	}
@@ -526,3 +533,9 @@ void do_signal(struct pt_regs *regs)
 		set_thread_flag(TIF_RESTART_SVC);
 	}
 }
+
+void do_notify_resume(struct pt_regs *regs)
+{
+	clear_thread_flag(TIF_NOTIFY_RESUME);
+	tracehook_notify_resume(regs);
+}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 00b9b4d..9e8b1f9 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -585,6 +585,8 @@ int __cpuinit start_secondary(void *cpuvoid)
 	/* Enable pfault pseudo page faults on this cpu. */
 	pfault_init();
 
+	/* call cpu notifiers */
+	notify_cpu_starting(smp_processor_id());
 	/* Mark this cpu as online */
 	spin_lock(&call_lock);
 	cpu_set(smp_processor_id(), cpu_online_map);
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index c66d35e..2d61787 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -37,7 +37,7 @@ SYSCALL(sys_stime,sys_ni_syscall,sys32_stime_wrapper)		/* 25 old stime syscall *
 SYSCALL(sys_ptrace,sys_ptrace,sys32_ptrace_wrapper)
 SYSCALL(sys_alarm,sys_alarm,sys32_alarm_wrapper)
 NI_SYSCALL							/* old fstat syscall */
-SYSCALL(sys_pause,sys_pause,sys32_pause)
+SYSCALL(sys_pause,sys_pause,sys_pause)
 SYSCALL(sys_utime,sys_utime,compat_sys_utime_wrapper)		/* 30 */
 NI_SYSCALL							/* old stty syscall */
 NI_SYSCALL							/* old gtty syscall */
@@ -86,8 +86,8 @@ SYSCALL(sys_sethostname,sys_sethostname,sys32_sethostname_wrapper)
 SYSCALL(sys_setrlimit,sys_setrlimit,compat_sys_setrlimit_wrapper)	/* 75 */
 SYSCALL(sys_old_getrlimit,sys_getrlimit,compat_sys_old_getrlimit_wrapper)
 SYSCALL(sys_getrusage,sys_getrusage,compat_sys_getrusage_wrapper)
-SYSCALL(sys_gettimeofday,sys_gettimeofday,sys32_gettimeofday_wrapper)
-SYSCALL(sys_settimeofday,sys_settimeofday,sys32_settimeofday_wrapper)
+SYSCALL(sys_gettimeofday,sys_gettimeofday,compat_sys_gettimeofday_wrapper)
+SYSCALL(sys_settimeofday,sys_settimeofday,compat_sys_settimeofday_wrapper)
 SYSCALL(sys_getgroups16,sys_ni_syscall,sys32_getgroups16_wrapper)	/* 80 old getgroups16 syscall */
 SYSCALL(sys_setgroups16,sys_ni_syscall,sys32_setgroups16_wrapper)	/* old setgroups16 syscall */
 NI_SYSCALL							/* old select syscall */
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ca114fe..b94e9e3 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -169,6 +169,8 @@ void init_cpu_timer(void)
 
 static void clock_comparator_interrupt(__u16 code)
 {
+	if (S390_lowcore.clock_comparator == -1ULL)
+		set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
 static void etr_timing_alert(struct etr_irq_parm *);
@@ -1354,7 +1356,7 @@ static void __init stp_reset(void)
 
 	stp_page = alloc_bootmem_pages(PAGE_SIZE);
 	rc = chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
-	if (rc == 1)
+	if (rc == 0)
 		set_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags);
 	else if (stp_online) {
 		printk(KERN_WARNING "Running on non STP capable machine.\n");
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index d1faf5c..cce40ff 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -157,8 +157,8 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 	int rc;
 
 	vcpu->stat.instruction_stfl++;
-	facility_list &= ~(1UL<<24); /* no stfle */
-	facility_list &= ~(1UL<<23); /* no large pages */
+	/* only pass the facility bits, which we can handle */
+	facility_list &= 0xfe00fff3;
 
 	rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
 			   &facility_list, sizeof(facility_list));
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index fc6ab60..6ccb9fa 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -1,14 +1,9 @@
 /*
- *  arch/s390/lib/delay.c
  *    Precise Delay Loops for S390
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *
- *  Derived from "arch/i386/lib/delay.c"
- *    Copyright (C) 1993 Linus Torvalds
- *    Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *    Copyright IBM Corp. 1999,2008
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Heiko Carstens <heiko.carstens@de.ibm.com>,
  */
 
 #include <linux/sched.h>
@@ -29,30 +24,31 @@ void __delay(unsigned long loops)
 	asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1));
 }
 
-/*
- * Waits for 'usecs' microseconds using the TOD clock comparator.
- */
-void __udelay(unsigned long usecs)
+static void __udelay_disabled(unsigned long usecs)
 {
-	u64 end, time, old_cc = 0;
-	unsigned long flags, cr0, mask, dummy;
-	int irq_context;
+	unsigned long mask, cr0, cr0_saved;
+	u64 clock_saved;
 
-	irq_context = in_interrupt();
-	if (!irq_context)
-		local_bh_disable();
-	local_irq_save(flags);
-	if (raw_irqs_disabled_flags(flags)) {
-		old_cc = local_tick_disable();
-		S390_lowcore.clock_comparator = -1ULL;
-		__ctl_store(cr0, 0, 0);
-		dummy = (cr0 & 0xffff00e0) | 0x00000800;
-		__ctl_load(dummy , 0, 0);
-		mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
-	} else
-		mask = psw_kernel_bits | PSW_MASK_WAIT |
-			PSW_MASK_EXT | PSW_MASK_IO;
+	clock_saved = local_tick_disable();
+	set_clock_comparator(get_clock() + ((u64) usecs << 12));
+	__ctl_store(cr0_saved, 0, 0);
+	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
+	__ctl_load(cr0 , 0, 0);
+	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	trace_hardirqs_on();
+	__load_psw_mask(mask);
+	local_irq_disable();
+	__ctl_load(cr0_saved, 0, 0);
+	local_tick_enable(clock_saved);
+	set_clock_comparator(S390_lowcore.clock_comparator);
+}
+
+static void __udelay_enabled(unsigned long usecs)
+{
+	unsigned long mask;
+	u64 end, time;
 
+	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO;
 	end = get_clock() + ((u64) usecs << 12);
 	do {
 		time = end < S390_lowcore.clock_comparator ?
@@ -62,13 +58,50 @@ void __udelay(unsigned long usecs)
 		__load_psw_mask(mask);
 		local_irq_disable();
 	} while (get_clock() < end);
+	set_clock_comparator(S390_lowcore.clock_comparator);
+}
 
-	if (raw_irqs_disabled_flags(flags)) {
-		__ctl_load(cr0, 0, 0);
-		local_tick_enable(old_cc);
+/*
+ * Waits for 'usecs' microseconds using the TOD clock comparator.
+ */
+void __udelay(unsigned long usecs)
+{
+	unsigned long flags;
+
+	preempt_disable();
+	local_irq_save(flags);
+	if (in_irq()) {
+		__udelay_disabled(usecs);
+		goto out;
 	}
-	if (!irq_context)
+	if (in_softirq()) {
+		if (raw_irqs_disabled_flags(flags))
+			__udelay_disabled(usecs);
+		else
+			__udelay_enabled(usecs);
+		goto out;
+	}
+	if (raw_irqs_disabled_flags(flags)) {
+		local_bh_disable();
+		__udelay_disabled(usecs);
 		_local_bh_enable();
-	set_clock_comparator(S390_lowcore.clock_comparator);
+		goto out;
+	}
+	__udelay_enabled(usecs);
+out:
 	local_irq_restore(flags);
+	preempt_enable();
+}
+
+/*
+ * Simple udelay variant. To be used on startup and reboot
+ * when the interrupt handler isn't working.
+ */
+void udelay_simple(unsigned long usecs)
+{
+	u64 end;
+
+	end = get_clock() + ((u64) usecs << 12);
+	while (get_clock() < end)
+		cpu_relax();
 }
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index f231f5e..580fc64 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -43,20 +43,40 @@
 #define DCSS_FINDSEG    0x0c
 #define DCSS_LOADNOLY   0x10
 #define DCSS_SEGEXT     0x18
+#define DCSS_LOADSHRX	0x20
+#define DCSS_LOADNSRX	0x24
+#define DCSS_FINDSEGX	0x2c
+#define DCSS_SEGEXTX	0x38
 #define DCSS_FINDSEGA   0x0c
 
 struct qrange {
-	unsigned int  start; // 3byte start address, 1 byte type
-	unsigned int  end;   // 3byte end address, 1 byte reserved
+	unsigned long  start; /* last byte type */
+	unsigned long  end;   /* last byte reserved */
 };
 
 struct qout64 {
+	unsigned long segstart;
+	unsigned long segend;
+	int segcnt;
+	int segrcnt;
+	struct qrange range[6];
+};
+
+#ifdef CONFIG_64BIT
+struct qrange_old {
+	unsigned int start; /* last byte type */
+	unsigned int end;   /* last byte reserved */
+};
+
+/* output area format for the Diag x'64' old subcode x'18' */
+struct qout64_old {
 	int segstart;
 	int segend;
 	int segcnt;
 	int segrcnt;
-	struct qrange range[6];
+	struct qrange_old range[6];
 };
+#endif
 
 struct qin64 {
 	char qopcode;
@@ -86,6 +106,55 @@ static DEFINE_MUTEX(dcss_lock);
 static LIST_HEAD(dcss_list);
 static char *segtype_string[] = { "SW", "EW", "SR", "ER", "SN", "EN", "SC",
 					"EW/EN-MIXED" };
+static int loadshr_scode, loadnsr_scode, findseg_scode;
+static int segext_scode, purgeseg_scode;
+static int scode_set;
+
+/* set correct Diag x'64' subcodes. */
+static int
+dcss_set_subcodes(void)
+{
+#ifdef CONFIG_64BIT
+	char *name = kmalloc(8 * sizeof(char), GFP_DMA);
+	unsigned long rx, ry;
+	int rc;
+
+	if (name == NULL)
+		return -ENOMEM;
+
+	rx = (unsigned long) name;
+	ry = DCSS_FINDSEGX;
+
+	strcpy(name, "dummy");
+	asm volatile(
+		"	diag	%0,%1,0x64\n"
+		"0:	ipm	%2\n"
+		"	srl	%2,28\n"
+		"	j	2f\n"
+		"1:	la	%2,3\n"
+		"2:\n"
+		EX_TABLE(0b, 1b)
+		: "+d" (rx), "+d" (ry), "=d" (rc) : : "cc");
+
+	kfree(name);
+	/* Diag x'64' new subcodes are supported, set to new subcodes */
+	if (rc != 3) {
+		loadshr_scode = DCSS_LOADSHRX;
+		loadnsr_scode = DCSS_LOADNSRX;
+		purgeseg_scode = DCSS_PURGESEG;
+		findseg_scode = DCSS_FINDSEGX;
+		segext_scode = DCSS_SEGEXTX;
+		return 0;
+	}
+#endif
+	/* Diag x'64' new subcodes are not supported, set to old subcodes */
+	loadshr_scode = DCSS_LOADNOLY;
+	loadnsr_scode = DCSS_LOADNSR;
+	purgeseg_scode = DCSS_PURGESEG;
+	findseg_scode = DCSS_FINDSEG;
+	segext_scode = DCSS_SEGEXT;
+	return 0;
+}
 
 /*
  * Create the 8 bytes, ebcdic VM segment name from
@@ -135,25 +204,45 @@ segment_by_name (char *name)
  * Perform a function on a dcss segment.
  */
 static inline int
-dcss_diag (__u8 func, void *parameter,
+dcss_diag(int *func, void *parameter,
            unsigned long *ret1, unsigned long *ret2)
 {
 	unsigned long rx, ry;
 	int rc;
 
+	if (scode_set == 0) {
+		rc = dcss_set_subcodes();
+		if (rc < 0)
+			return rc;
+		scode_set = 1;
+	}
 	rx = (unsigned long) parameter;
-	ry = (unsigned long) func;
-	asm volatile(
+	ry = (unsigned long) *func;
+
 #ifdef CONFIG_64BIT
-		"	sam31\n"
-		"	diag	%0,%1,0x64\n"
-		"	sam64\n"
+	/* 64-bit Diag x'64' new subcode, keep in 64-bit addressing mode */
+	if (*func > DCSS_SEGEXT)
+		asm volatile(
+			"	diag	%0,%1,0x64\n"
+			"	ipm	%2\n"
+			"	srl	%2,28\n"
+			: "+d" (rx), "+d" (ry), "=d" (rc) : : "cc");
+	/* 31-bit Diag x'64' old subcode, switch to 31-bit addressing mode */
+	else
+		asm volatile(
+			"	sam31\n"
+			"	diag	%0,%1,0x64\n"
+			"	sam64\n"
+			"	ipm	%2\n"
+			"	srl	%2,28\n"
+			: "+d" (rx), "+d" (ry), "=d" (rc) : : "cc");
 #else
+	asm volatile(
 		"	diag	%0,%1,0x64\n"
-#endif
 		"	ipm	%2\n"
 		"	srl	%2,28\n"
 		: "+d" (rx), "+d" (ry), "=d" (rc) : : "cc");
+#endif
 	*ret1 = rx;
 	*ret2 = ry;
 	return rc;
@@ -190,14 +279,45 @@ query_segment_type (struct dcss_segment *seg)
 	qin->qoutlen = sizeof(struct qout64);
 	memcpy (qin->qname, seg->dcss_name, 8);
 
-	diag_cc = dcss_diag (DCSS_SEGEXT, qin, &dummy, &vmrc);
+	diag_cc = dcss_diag(&segext_scode, qin, &dummy, &vmrc);
 
+	if (diag_cc < 0) {
+		rc = diag_cc;
+		goto out_free;
+	}
 	if (diag_cc > 1) {
 		PRINT_WARN ("segment_type: diag returned error %ld\n", vmrc);
 		rc = dcss_diag_translate_rc (vmrc);
 		goto out_free;
 	}
 
+#ifdef CONFIG_64BIT
+	/* Only old format of output area of Diagnose x'64' is supported,
+	   copy data for the new format. */
+	if (segext_scode == DCSS_SEGEXT) {
+		struct qout64_old *qout_old;
+		qout_old = kzalloc(sizeof(struct qout64_old), GFP_DMA);
+		if (qout_old == NULL) {
+			rc = -ENOMEM;
+			goto out_free;
+		}
+		memcpy(qout_old, qout, sizeof(struct qout64_old));
+		qout->segstart = (unsigned long) qout_old->segstart;
+		qout->segend = (unsigned long) qout_old->segend;
+		qout->segcnt = qout_old->segcnt;
+		qout->segrcnt = qout_old->segrcnt;
+
+		if (qout->segcnt > 6)
+			qout->segrcnt = 6;
+		for (i = 0; i < qout->segrcnt; i++) {
+			qout->range[i].start =
+				(unsigned long) qout_old->range[i].start;
+			qout->range[i].end =
+				(unsigned long) qout_old->range[i].end;
+		}
+		kfree(qout_old);
+	}
+#endif
 	if (qout->segcnt > 6) {
 		rc = -ENOTSUPP;
 		goto out_free;
@@ -269,6 +389,30 @@ segment_type (char* name)
 }
 
 /*
+ * check if segment collides with other segments that are currently loaded
+ * returns 1 if this is the case, 0 if no collision was found
+ */
+static int
+segment_overlaps_others (struct dcss_segment *seg)
+{
+	struct list_head *l;
+	struct dcss_segment *tmp;
+
+	BUG_ON(!mutex_is_locked(&dcss_lock));
+	list_for_each(l, &dcss_list) {
+		tmp = list_entry(l, struct dcss_segment, list);
+		if ((tmp->start_addr >> 20) > (seg->end >> 20))
+			continue;
+		if ((tmp->end >> 20) < (seg->start_addr >> 20))
+			continue;
+		if (seg == tmp)
+			continue;
+		return 1;
+	}
+	return 0;
+}
+
+/*
  * real segment loading function, called from segment_load
  */
 static int
@@ -276,7 +420,8 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
 {
 	struct dcss_segment *seg = kmalloc(sizeof(struct dcss_segment),
 			GFP_DMA);
-	int dcss_command, rc, diag_cc;
+	int rc, diag_cc;
+	unsigned long start_addr, end_addr, dummy;
 
 	if (seg == NULL) {
 		rc = -ENOMEM;
@@ -287,6 +432,13 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
 	if (rc < 0)
 		goto out_free;
 
+	if (loadshr_scode == DCSS_LOADSHRX) {
+		if (segment_overlaps_others(seg)) {
+			rc = -EBUSY;
+			goto out_free;
+		}
+	}
+
 	rc = vmem_add_mapping(seg->start_addr, seg->end - seg->start_addr + 1);
 
 	if (rc)
@@ -316,20 +468,28 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
 	}
 
 	if (do_nonshared)
-		dcss_command = DCSS_LOADNSR;
+		diag_cc = dcss_diag(&loadnsr_scode, seg->dcss_name,
+				&start_addr, &end_addr);
 	else
-		dcss_command = DCSS_LOADNOLY;
-
-	diag_cc = dcss_diag(dcss_command, seg->dcss_name,
-			&seg->start_addr, &seg->end);
+		diag_cc = dcss_diag(&loadshr_scode, seg->dcss_name,
+				&start_addr, &end_addr);
+	if (diag_cc < 0) {
+		dcss_diag(&purgeseg_scode, seg->dcss_name,
+				&dummy, &dummy);
+		rc = diag_cc;
+		goto out_resource;
+	}
 	if (diag_cc > 1) {
 		PRINT_WARN ("segment_load: could not load segment %s - "
-				"diag returned error (%ld)\n",name,seg->end);
-		rc = dcss_diag_translate_rc (seg->end);
-		dcss_diag(DCSS_PURGESEG, seg->dcss_name,
-				&seg->start_addr, &seg->end);
+				"diag returned error (%ld)\n",
+				name, end_addr);
+		rc = dcss_diag_translate_rc(end_addr);
+		dcss_diag(&purgeseg_scode, seg->dcss_name,
+				&dummy, &dummy);
 		goto out_resource;
 	}
+	seg->start_addr = start_addr;
+	seg->end = end_addr;
 	seg->do_nonshared = do_nonshared;
 	atomic_set(&seg->ref_count, 1);
 	list_add(&seg->list, &dcss_list);
@@ -423,8 +583,8 @@ int
 segment_modify_shared (char *name, int do_nonshared)
 {
 	struct dcss_segment *seg;
-	unsigned long dummy;
-	int dcss_command, rc, diag_cc;
+	unsigned long start_addr, end_addr, dummy;
+	int rc, diag_cc;
 
 	mutex_lock(&dcss_lock);
 	seg = segment_by_name (name);
@@ -445,38 +605,51 @@ segment_modify_shared (char *name, int do_nonshared)
 		goto out_unlock;
 	}
 	release_resource(seg->res);
-	if (do_nonshared) {
-		dcss_command = DCSS_LOADNSR;
+	if (do_nonshared)
 		seg->res->flags &= ~IORESOURCE_READONLY;
-	} else {
-		dcss_command = DCSS_LOADNOLY;
+	else
 		if (seg->vm_segtype == SEG_TYPE_SR ||
 		    seg->vm_segtype == SEG_TYPE_ER)
 			seg->res->flags |= IORESOURCE_READONLY;
-	}
+
 	if (request_resource(&iomem_resource, seg->res)) {
 		PRINT_WARN("segment_modify_shared: could not reload segment %s"
 			   " - overlapping resources\n", name);
 		rc = -EBUSY;
 		kfree(seg->res);
-		goto out_del;
+		goto out_del_mem;
+	}
+
+	dcss_diag(&purgeseg_scode, seg->dcss_name, &dummy, &dummy);
+	if (do_nonshared)
+		diag_cc = dcss_diag(&loadnsr_scode, seg->dcss_name,
+				&start_addr, &end_addr);
+	else
+		diag_cc = dcss_diag(&loadshr_scode, seg->dcss_name,
+				&start_addr, &end_addr);
+	if (diag_cc < 0) {
+		rc = diag_cc;
+		goto out_del_res;
 	}
-	dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy);
-	diag_cc = dcss_diag(dcss_command, seg->dcss_name,
-			&seg->start_addr, &seg->end);
 	if (diag_cc > 1) {
 		PRINT_WARN ("segment_modify_shared: could not reload segment %s"
-				" - diag returned error (%ld)\n",name,seg->end);
-		rc = dcss_diag_translate_rc (seg->end);
-		goto out_del;
+				" - diag returned error (%ld)\n",
+				name, end_addr);
+		rc = dcss_diag_translate_rc(end_addr);
+		goto out_del_res;
 	}
+	seg->start_addr = start_addr;
+	seg->end = end_addr;
 	seg->do_nonshared = do_nonshared;
 	rc = 0;
 	goto out_unlock;
- out_del:
+ out_del_res:
+	release_resource(seg->res);
+	kfree(seg->res);
+ out_del_mem:
 	vmem_remove_mapping(seg->start_addr, seg->end - seg->start_addr + 1);
 	list_del(&seg->list);
-	dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy);
+	dcss_diag(&purgeseg_scode, seg->dcss_name, &dummy, &dummy);
 	kfree(seg);
  out_unlock:
 	mutex_unlock(&dcss_lock);
@@ -510,7 +683,7 @@ segment_unload(char *name)
 	kfree(seg->res);
 	vmem_remove_mapping(seg->start_addr, seg->end - seg->start_addr + 1);
 	list_del(&seg->list);
-	dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy);
+	dcss_diag(&purgeseg_scode, seg->dcss_name, &dummy, &dummy);
 	kfree(seg);
 out_unlock:
 	mutex_unlock(&dcss_lock);
@@ -545,7 +718,7 @@ segment_save(char *name)
 	endpfn = (seg->end) >> PAGE_SHIFT;
 	sprintf(cmd1, "DEFSEG %s", name);
 	for (i=0; i<seg->segcnt; i++) {
-		sprintf(cmd1+strlen(cmd1), " %X-%X %s",
+		sprintf(cmd1+strlen(cmd1), " %lX-%lX %s",
 			seg->range[i].start >> PAGE_SHIFT,
 			seg->range[i].end >> PAGE_SHIFT,
 			segtype_string[seg->range[i].start & 0xff]);
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 1169130..158b0d6 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -189,14 +189,3 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	return rc;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
-
-#ifdef CONFIG_MEMORY_HOTREMOVE
-int remove_memory(u64 start, u64 size)
-{
-	unsigned long start_pfn, end_pfn;
-
-	start_pfn = PFN_DOWN(start);
-	end_pfn = start_pfn + PFN_DOWN(size);
-	return offline_pages(start_pfn, end_pfn, 120 * HZ);
-}
-#endif /* CONFIG_MEMORY_HOTREMOVE */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5131d50..cb2c87d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -12,6 +12,7 @@ config SUPERH
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_IOREMAP_PROT if MMU
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -20,6 +21,10 @@ config SUPERH
 
 config SUPERH32
 	def_bool !SUPERH64
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_FTRACE
 
 config SUPERH64
 	def_bool y if CPU_SH5
@@ -54,8 +59,11 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 config GENERIC_IRQ_PROBE
 	def_bool y
 
+config GENERIC_GPIO
+	def_bool n
+
 config GENERIC_CALIBRATE_DELAY
-	def_bool y
+	bool
 
 config GENERIC_IOMAP
 	bool
@@ -66,6 +74,9 @@ config GENERIC_TIME
 config GENERIC_CLOCKEVENTS
 	def_bool n
 
+config GENERIC_CLOCKEVENTS_BROADCAST
+	bool
+
 config GENERIC_LOCKBREAK
 	def_bool y
 	depends on SMP && PREEMPT
@@ -92,6 +103,10 @@ config STACKTRACE_SUPPORT
 config LOCKDEP_SUPPORT
 	def_bool y
 
+config HAVE_LATENCYTOP_SUPPORT
+	def_bool y
+	depends on !SMP
+
 config ARCH_HAS_ILOG2_U32
 	def_bool n
 
@@ -106,6 +121,8 @@ config IO_TRAPPED
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "System type"
 
 #
@@ -323,6 +340,7 @@ config CPU_SUBTYPE_SHX3
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 
 # SH4AL-DSP Processor Support
 
@@ -490,7 +508,6 @@ config CRASH_DUMP
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
-	default y
 	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 4d2d102..e6d2c8b 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -82,7 +82,7 @@ config DEBUG_STACK_USAGE
 
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
-	depends on DEBUG_KERNEL && (MMU || BROKEN)
+	depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB
 	help
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 01d85c7..1f409bf 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -76,8 +76,10 @@ KBUILD_IMAGE		:= $(defaultimage-y)
 # error messages during linking.
 #
 ifdef CONFIG_SUPERH32
+UTS_MACHINE	:= sh
 LDFLAGS_vmlinux	+= -e _stext
 else
+UTS_MACHINE	:= sh64
 LDFLAGS_vmlinux	+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
 		   --defsym phys_stext_shmedia=phys_stext+1 \
 		   -e phys_stext_shmedia
@@ -123,6 +125,9 @@ core-y	+= $(addprefix arch/sh/boards/, \
 	     $(filter-out ., $(patsubst %,%/,$(machdir-y))))
 endif
 
+# Common machine type headers. Not part of the arch/sh/boards/ hierarchy.
+machdir-y	+= mach-common
+
 # Companion chips
 core-$(CONFIG_HD6446X_SERIES)	+= arch/sh/cchips/hd6446x/
 
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index ae19486..50467f9 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -128,6 +128,7 @@ config SH_RTS7751R2D
 
 config SH_RSK7203
 	bool "RSK7203"
+	select GENERIC_GPIO
 	depends on CPU_SUBTYPE_SH7203
 
 config SH_SDK7780
@@ -162,6 +163,7 @@ config SH_SH7785LCR_29BIT_PHYSMAPS
 config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722
+	select GENERIC_GPIO
 	help
 	  Select Migo-R if configuring for the SH7722 Migo-R platform
           by Renesas System Solutions Asia Pte. Ltd.
@@ -169,6 +171,7 @@ config SH_MIGOR
 config SH_AP325RXA
 	bool "AP-325RXA"
 	depends on CPU_SUBTYPE_SH7723
+	select GENERIC_GPIO
 	help
 	  Renesas "AP-325RXA" support.
 	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
@@ -184,6 +187,13 @@ config SH_EDOSK7705
 	bool "EDOSK7705"
 	depends on CPU_SUBTYPE_SH7705
 
+config SH_EDOSK7760
+	bool "EDOSK7760"
+	depends on CPU_SUBTYPE_SH7760
+	help
+	  Select if configuring for a Renesas EDOSK7760
+	  evaluation board.
+
 config SH_SH4202_MICRODEV
 	bool "SH4-202 MicroDev"
 	depends on CPU_SUBTYPE_SH4_202
@@ -228,6 +238,7 @@ config SH_X3PROTO
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
 	depends on CPU_SUBTYPE_SH7720
+	select GENERIC_GPIO
 	help
 	  Select Magic Panel R2 if configuring for Magic Panel R2.
 
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 463022c..d9efa39 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
 obj-$(CONFIG_SH_RSK7203)	+= board-rsk7203.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
+obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index fd16125..8881a64 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -15,14 +15,17 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/sh_flctl.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/smc911x.h>
+#include <linux/gpio.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
-#include <asm/sh_mobile_lcdc.h>
+#include <video/sh_mobile_lcdc.h>
 #include <asm/io.h>
 #include <asm/clock.h>
+#include <cpu/sh7723.h>
 
 static struct smc911x_platdata smc911x_info = {
 	.flags = SMC911X_USE_32BIT,
@@ -52,20 +55,33 @@ static struct platform_device smc9118_device = {
 	},
 };
 
+/*
+ * AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF).
+ * If this area erased, this board can not boot.
+ */
 static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
 	{
-		 .name = "uboot",
-		 .offset = 0,
-		 .size = (1 * 1024 * 1024),
-		 .mask_flags = MTD_WRITEABLE,	/* Read-only */
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (2 * 1024 * 1024),
 	}, {
-		 .name = "kernel",
-		 .offset = MTDPART_OFS_APPEND,
-		 .size = (2 * 1024 * 1024),
+		.name = "free-area0",
+		.offset = MTDPART_OFS_APPEND,
+		.size = ((7 * 1024 * 1024) + (512 * 1024)),
 	}, {
-		 .name = "other",
-		 .offset = MTDPART_OFS_APPEND,
-		 .size = MTDPART_SIZ_FULL,
+		.name = "CPLD-Data",
+		.offset = MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+		.size = (1024 * 128 * 2),
+	}, {
+		.name = "free-area1",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
 	},
 };
 
@@ -93,20 +109,45 @@ static struct platform_device ap325rxa_nor_flash_device = {
 	},
 };
 
+static struct mtd_partition nand_partition_info[] = {
+	{
+		.name	= "nand_data",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct resource nand_flash_resources[] = {
+	[0] = {
+		.start	= 0xa4530000,
+		.end	= 0xa45300ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct sh_flctl_platform_data nand_flash_data = {
+	.parts		= nand_partition_info,
+	.nr_parts	= ARRAY_SIZE(nand_partition_info),
+	.flcmncr_val	= FCKSEL_E | TYPESEL_SET | NANWF_E,
+	.has_hwecc	= 1,
+};
+
+static struct platform_device nand_flash_device = {
+	.name		= "sh_flctl",
+	.resource	= nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(nand_flash_resources),
+	.dev		= {
+		.platform_data = &nand_flash_data,
+	},
+};
+
 #define FPGA_LCDREG	0xB4100180
 #define FPGA_BKLREG	0xB4100212
 #define FPGA_LCDREG_VAL	0x0018
-#define PORT_PHCR	0xA405010E
-#define PORT_PLCR	0xA4050114
-#define PORT_PMCR	0xA4050116
-#define PORT_PRCR	0xA405011C
-#define PORT_PSCR	0xA405011E
-#define PORT_PZCR	0xA405014C
-#define PORT_HIZCRA	0xA4050158
 #define PORT_MSELCRB	0xA4050182
-#define PORT_PSDR	0xA405013E
-#define PORT_PZDR	0xA405016C
-#define PORT_PSELD	0xA4050154
+#define PORT_HIZCRC	0xA405015C
+#define PORT_DRVCRA	0xA405018A
+#define PORT_DRVCRB	0xA405018C
 
 static void ap320_wvga_power_on(void *board_data)
 {
@@ -116,8 +157,7 @@ static void ap320_wvga_power_on(void *board_data)
 	ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
 
 	/* backlight */
-	ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
-	ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+	gpio_set_value(GPIO_PTS3, 0);
 	ctrl_outw(0x100, FPGA_BKLREG);
 }
 
@@ -278,43 +318,119 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
 #ifdef CONFIG_I2C
 	&camera_device,
 #endif
+	&nand_flash_device,
 };
 
 static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
 };
 
 static int __init ap325rxa_devices_setup(void)
 {
-	clk_always_enable("mstp200"); /* LCDC */
-	clk_always_enable("mstp203"); /* CEU */
+	/* LD3 and LD4 LEDs */
+	gpio_request(GPIO_PTX5, NULL); /* RUN */
+	gpio_direction_output(GPIO_PTX5, 1);
+	gpio_export(GPIO_PTX5, 0);
+
+	gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
+	gpio_direction_output(GPIO_PTX4, 0);
+	gpio_export(GPIO_PTX4, 0);
+
+	/* SW1 input */
+	gpio_request(GPIO_PTF7, NULL); /* MODE */
+	gpio_direction_input(GPIO_PTF7);
+	gpio_export(GPIO_PTF7, 0);
+
+	/* LCDC */
+	clk_always_enable("mstp200");
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDLCLK_PTR, NULL);
+	gpio_request(GPIO_FN_LCDDCK, NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDVSYN, NULL);
+	gpio_request(GPIO_FN_LCDHSYN, NULL);
+	gpio_request(GPIO_FN_LCDDISP, NULL);
+	gpio_request(GPIO_FN_LCDDON, NULL);
+
+	/* LCD backlight */
+	gpio_request(GPIO_PTS3, NULL);
+	gpio_direction_output(GPIO_PTS3, 1);
+
+	/* CEU */
+	clk_always_enable("mstp203");
+	gpio_request(GPIO_FN_VIO_CLK2, NULL);
+	gpio_request(GPIO_FN_VIO_VD2, NULL);
+	gpio_request(GPIO_FN_VIO_HD2, NULL);
+	gpio_request(GPIO_FN_VIO_FLD, NULL);
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO_D15, NULL);
+	gpio_request(GPIO_FN_VIO_D14, NULL);
+	gpio_request(GPIO_FN_VIO_D13, NULL);
+	gpio_request(GPIO_FN_VIO_D12, NULL);
+	gpio_request(GPIO_FN_VIO_D11, NULL);
+	gpio_request(GPIO_FN_VIO_D10, NULL);
+	gpio_request(GPIO_FN_VIO_D9, NULL);
+	gpio_request(GPIO_FN_VIO_D8, NULL);
+
+	gpio_request(GPIO_PTZ7, NULL);
+	gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */
+	gpio_request(GPIO_PTZ6, NULL);
+	gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
+	gpio_request(GPIO_PTZ5, NULL);
+	gpio_direction_output(GPIO_PTZ5, 1); /* RST_CAM */
+	gpio_request(GPIO_PTZ4, NULL);
+	gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
+
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+
+	/* FLCTL */
+	gpio_request(GPIO_FN_FCE, NULL);
+	gpio_request(GPIO_FN_NAF7, NULL);
+	gpio_request(GPIO_FN_NAF6, NULL);
+	gpio_request(GPIO_FN_NAF5, NULL);
+	gpio_request(GPIO_FN_NAF4, NULL);
+	gpio_request(GPIO_FN_NAF3, NULL);
+	gpio_request(GPIO_FN_NAF2, NULL);
+	gpio_request(GPIO_FN_NAF1, NULL);
+	gpio_request(GPIO_FN_NAF0, NULL);
+	gpio_request(GPIO_FN_FCDE, NULL);
+	gpio_request(GPIO_FN_FOE, NULL);
+	gpio_request(GPIO_FN_FSC, NULL);
+	gpio_request(GPIO_FN_FWE, NULL);
+	gpio_request(GPIO_FN_FRB, NULL);
+
+	ctrl_outw(0, PORT_HIZCRC);
+	ctrl_outw(0xFFFF, PORT_DRVCRA);
+	ctrl_outw(0xFFFF, PORT_DRVCRB);
 
 	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
 
 	i2c_register_board_info(0, ap325rxa_i2c_devices,
 				ARRAY_SIZE(ap325rxa_i2c_devices));
- 
+
 	return platform_add_devices(ap325rxa_devices,
 				ARRAY_SIZE(ap325rxa_devices));
 }
 device_initcall(ap325rxa_devices_setup);
 
-static void __init ap325rxa_setup(char **cmdline_p)
-{
-	/* LCDC configuration */
-	ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
-	ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
-	ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
-	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
-
-	/* CEU */
-	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
-	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
-	ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
-	ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
-}
-
 static struct sh_machine_vector mv_ap325rxa __initmv = {
 	.mv_name = "AP-325RXA",
-	.mv_setup = ap325rxa_setup,
 };
diff --git a/arch/sh/boards/board-edosk7760.c b/arch/sh/boards/board-edosk7760.c
new file mode 100644
index 0000000..35dc099
--- /dev/null
+++ b/arch/sh/boards/board-edosk7760.c
@@ -0,0 +1,193 @@
+/*
+ * Renesas Europe EDOSK7760 Board Support
+ *
+ * Copyright (C) 2008 SPES Societa' Progettazione Elettronica e Software Ltd.
+ * Author: Luca Santini <luca.santini@spesonline.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/delay.h>
+#include <asm/i2c-sh7760.h>
+#include <asm/sizes.h>
+
+/* Bus state controller registers for CS4 area */
+#define BSC_CS4BCR	0xA4FD0010
+#define BSC_CS4WCR	0xA4FD0030
+
+#define SMC_IOBASE	0xA2000000
+#define SMC_IO_OFFSET	0x300
+#define SMC_IOADDR	(SMC_IOBASE + SMC_IO_OFFSET)
+
+#define ETHERNET_IRQ	5
+
+/* NOR flash */
+static struct mtd_partition edosk7760_nor_flash_partitions[] = {
+	{
+		.name = "bootloader",
+		.offset = 0,
+		.size = SZ_256K,
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = SZ_2M,
+	}, {
+		.name = "fs",
+		.offset = MTDPART_OFS_APPEND,
+		.size = SZ_26M,
+	}, {
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data edosk7760_nor_flash_data = {
+	.width		= 4,
+	.parts		= edosk7760_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(edosk7760_nor_flash_partitions),
+};
+
+static struct resource edosk7760_nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x00000000 + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device edosk7760_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= edosk7760_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(edosk7760_nor_flash_resources),
+	.dev		= {
+		.platform_data = &edosk7760_nor_flash_data,
+	},
+};
+
+/* i2c initialization functions */
+static struct sh7760_i2c_platdata i2c_pd = {
+	.speed_khz	= 400,
+};
+
+static struct resource sh7760_i2c1_res[] = {
+	{
+		.start	= SH7760_I2C1_MMIO,
+		.end	= SH7760_I2C1_MMIOEND,
+		.flags	= IORESOURCE_MEM,
+	},{
+		.start	= SH7760_I2C1_IRQ,
+		.end	= SH7760_I2C1_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh7760_i2c1_dev = {
+	.dev    = {
+		.platform_data	= &i2c_pd,
+	},
+
+	.name		= SH7760_I2C_DEVNAME,
+	.id		= 1,
+	.resource	= sh7760_i2c1_res,
+	.num_resources	= ARRAY_SIZE(sh7760_i2c1_res),
+};
+
+static struct resource sh7760_i2c0_res[] = {
+	{
+		.start	= SH7760_I2C0_MMIO,
+		.end	= SH7760_I2C0_MMIOEND,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= SH7760_I2C0_IRQ,
+		.end	= SH7760_I2C0_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh7760_i2c0_dev = {
+	.dev    = {
+		.platform_data	= &i2c_pd,
+	},
+	.name		= SH7760_I2C_DEVNAME,
+	.id		= 0,
+	.resource	= sh7760_i2c0_res,
+	.num_resources	= ARRAY_SIZE(sh7760_i2c0_res),
+};
+
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+	[0] = {
+		.start	= SMC_IOADDR,
+		.end	= SMC_IOADDR + SZ_32 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= ETHERNET_IRQ,
+		.end	= ETHERNET_IRQ,
+		.flags	= IORESOURCE_IRQ ,
+	}
+};
+
+static struct platform_device smc91x_dev = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_res),
+	.resource	= smc91x_res,
+
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* platform init code */
+static struct platform_device *edosk7760_devices[] __initdata = {
+	&smc91x_dev,
+	&edosk7760_nor_flash_device,
+	&sh7760_i2c0_dev,
+	&sh7760_i2c1_dev,
+};
+
+static int __init init_edosk7760_devices(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+
+	return platform_add_devices(edosk7760_devices,
+				    ARRAY_SIZE(edosk7760_devices));
+}
+__initcall(init_edosk7760_devices);
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_edosk7760 __initmv = {
+	.mv_name	= "EDOSK7760",
+	.mv_nr_irqs	= 128,
+};
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index f3b8b07..3de22cc 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -13,12 +13,14 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/map.h>
-#include <asm/magicpanelr2.h>
+#include <mach/magicpanelr2.h>
 #include <asm/heartbeat.h>
+#include <cpu/sh7720.h>
 
 #define LAN9115_READY	(ctrl_inl(0xA8000084UL) & 0x00000001UL)
 
@@ -170,7 +172,14 @@ static void __init setup_port_multiplexing(void)
 	/* R7 A25;	     R6 A24;	     R5 A23;		  R4 A22;
 	 * R3 A21;	     R2 A20;	     R1 A19;		  R0 A0;
 	 */
-	ctrl_outw(0x0000, PORT_PRCR);	/* 00 00 00 00 00 00 00 00 */
+	gpio_request(GPIO_FN_A25, NULL);
+	gpio_request(GPIO_FN_A24, NULL);
+	gpio_request(GPIO_FN_A23, NULL);
+	gpio_request(GPIO_FN_A22, NULL);
+	gpio_request(GPIO_FN_A21, NULL);
+	gpio_request(GPIO_FN_A20, NULL);
+	gpio_request(GPIO_FN_A19, NULL);
+	gpio_request(GPIO_FN_A0, NULL);
 
 	/* S7 (x);		S6 (x);        S5 (x);	     S4 GPO(EEPROM_CS2);
 	 * S3 GPO(EEPROM_CS1);  S2 SIOF0_TXD;  S1 SIOF0_RXD; S0 SIOF0_SCK;
diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/board-rsk7203.c
index ffbedc5..58266f0 100644
--- a/arch/sh/boards/board-rsk7203.c
+++ b/arch/sh/boards/board-rsk7203.c
@@ -16,8 +16,11 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/map.h>
 #include <linux/smc911x.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
+#include <cpu/sh7203.h>
 
 static struct smc911x_platdata smc911x_info = {
 	.flags		= SMC911X_USE_16BIT,
@@ -114,14 +117,54 @@ static void __init set_mtd_partitions(void)
 	}
 }
 
+static struct gpio_led rsk7203_gpio_leds[] = {
+	{
+		.name			= "green",
+		.gpio			= GPIO_PE10,
+		.active_low		= 1,
+	}, {
+		.name			= "orange",
+		.default_trigger	= "nand-disk",
+		.gpio			= GPIO_PE12,
+		.active_low		= 1,
+	}, {
+		.name			= "red:timer",
+		.default_trigger	= "timer",
+		.gpio			= GPIO_PC14,
+		.active_low		= 1,
+	}, {
+		.name			= "red:heartbeat",
+		.default_trigger	= "heartbeat",
+		.gpio			= GPIO_PE11,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data rsk7203_gpio_leds_info = {
+	.leds		= rsk7203_gpio_leds,
+	.num_leds	= ARRAY_SIZE(rsk7203_gpio_leds),
+};
+
+static struct platform_device led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &rsk7203_gpio_leds_info,
+	},
+};
 
 static struct platform_device *rsk7203_devices[] __initdata = {
 	&smc911x_device,
 	&flash_device,
+	&led_device,
 };
 
 static int __init rsk7203_devices_setup(void)
 {
+	/* Select pins for SCIF0 */
+	gpio_request(GPIO_FN_TXD0, NULL);
+	gpio_request(GPIO_FN_RXD0, NULL);
+
 	set_mtd_partitions();
 	return platform_add_devices(rsk7203_devices,
 				    ARRAY_SIZE(rsk7203_devices));
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index b95d674..408bbdd 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -19,7 +19,7 @@
 #include <linux/i2c-pca-platform.h>
 #include <linux/i2c-algo-pca.h>
 #include <asm/heartbeat.h>
-#include <asm/sh7785lcr.h>
+#include <mach/sh7785lcr.h>
 
 /*
  * NOTE: This board has 2 physical memory maps.
diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c
index 16e5dae..5cc0867d 100644
--- a/arch/sh/boards/board-shmin.c
+++ b/arch/sh/boards/board-shmin.c
@@ -8,7 +8,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/machvec.h>
-#include <asm/shmin.h>
+#include <mach/shmin.h>
 #include <asm/clock.h>
 #include <asm/io.h>
 
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 541cea2..7d153e5 100644
--- a/arch/sh/boards/mach-edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/edosk7705/io.h>
+#include <mach/edosk7705.h>
 #include <asm/addrspace.h>
 
 #define SMC_IOADDR	0xA2000000
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index f076c45..ab3f47b 100644
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
@@ -10,7 +10,7 @@
  */
 #include <linux/init.h>
 #include <asm/machvec.h>
-#include <asm/edosk7705/io.h>
+#include <mach/edosk7705.h>
 
 static void __init sh_edosk7705_init_irq(void)
 {
diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index fc8f28e..08057f6 100644
--- a/arch/sh/boards/mach-highlander/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
@@ -18,6 +18,7 @@ config SH_R7780MP
 config SH_R7785RP
 	bool "R7785RP board support"
 	depends on CPU_SUBTYPE_SH7785
+	select GENERIC_GPIO
 
 endchoice
 
diff --git a/arch/sh/boards/mach-highlander/Makefile b/arch/sh/boards/mach-highlander/Makefile
index 20a1008..d93aaf8 100644
--- a/arch/sh/boards/mach-highlander/Makefile
+++ b/arch/sh/boards/mach-highlander/Makefile
@@ -1,10 +1,10 @@
 #
-# Makefile for the R7780RP-1 specific parts of the kernel
+# Makefile for the Highlander specific parts of the kernel
 #
-irqinit-$(CONFIG_SH_R7780MP)	:= irq-r7780mp.o
-irqinit-$(CONFIG_SH_R7785RP)	:= irq-r7785rp.o
-irqinit-$(CONFIG_SH_R7780RP)	:= irq-r7780rp.o
-obj-y				:= setup.o $(irqinit-y)
+obj-y				:= setup.o
+obj-$(CONFIG_SH_R7780RP)	+= irq-r7780rp.o
+obj-$(CONFIG_SH_R7780MP)	+= irq-r7780mp.o
+obj-$(CONFIG_SH_R7785RP)	+= irq-r7785rp.o pinmux-r7785rp.o
 
 ifneq ($(CONFIG_SH_R7785RP),y)
 obj-$(CONFIG_PUSH_SWITCH)	+= psw.o
diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index ae1cfcb..83c28bc 100644
--- a/arch/sh/boards/mach-highlander/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
 
 enum {
 	UNUSED = 0,
diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index 9d3921f..b721e86 100644
--- a/arch/sh/boards/mach-highlander/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
 
 enum {
 	UNUSED = 0,
diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 896c045..3811b06 100644
--- a/arch/sh/boards/mach-highlander/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
 
 enum {
 	UNUSED = 0,
diff --git a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
new file mode 100644
index 0000000..c77a2be
--- /dev/null
+++ b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <cpu/sh7785.h>
+
+void __init highlander_plat_pinmux_setup(void)
+{
+	/* SCIF0 */
+	gpio_request(GPIO_FN_SCIF0_CTS, NULL);
+	gpio_request(GPIO_FN_SCIF0_RTS, NULL);
+	gpio_request(GPIO_FN_SCIF0_SCK, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+}
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
index be8d547..37b1a2e 100644
--- a/arch/sh/boards/mach-highlander/psw.c
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
 #include <asm/push-switch.h>
 
 static irqreturn_t psw_irq_handler(int irq, void *arg)
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index bc79afb..806438b 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -20,7 +20,7 @@
 #include <linux/i2c.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
 #include <asm/clock.h>
 #include <asm/heartbeat.h>
 #include <asm/io.h>
@@ -294,6 +294,8 @@ static void __init highlander_setup(char **cmdline_p)
 			 (ver >> 12) & 0xf, (ver >> 8) & 0xf,
 			 (ver >>  4) & 0xf, ver & 0xf);
 
+	highlander_plat_pinmux_setup();
+
 	/*
 	 * Enable the important clocks right away..
 	 */
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index 177f4f0..e85212f 100644
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -14,7 +14,7 @@
 #include <linux/apm-emulation.h>
 #include <linux/io.h>
 #include <asm/adc.h>
-#include <asm/hp6xx.h>
+#include <mach/hp6xx.h>
 
 /* percentage values */
 #define APM_CRITICAL			10
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index e96684d..64af1f2 100644
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -12,7 +12,7 @@
 #include <linux/time.h>
 #include <asm/io.h>
 #include <asm/hd64461.h>
-#include <asm/hp6xx.h>
+#include <mach/hp6xx.h>
 #include <cpu/dac.h>
 #include <asm/pm.h>
 
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index 475b46c..48fece7 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -15,7 +15,7 @@
 #include <asm/hd64461.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hp6xx.h>
+#include <mach/hp6xx.h>
 #include <cpu/dac.h>
 
 #define	SCPCR	0xa4000116
diff --git a/arch/sh/boards/mach-lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
index 5a1c3bb..8aa171a 100644
--- a/arch/sh/boards/mach-lboxre2/irq.c
+++ b/arch/sh/boards/mach-lboxre2/irq.c
@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/lboxre2.h>
+#include <mach/lboxre2.h>
 
 /*
  * Initialize IRQ setting
diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
index c74440d..2b0b581 100644
--- a/arch/sh/boards/mach-lboxre2/setup.c
+++ b/arch/sh/boards/mach-lboxre2/setup.c
@@ -16,7 +16,7 @@
 #include <linux/ata_platform.h>
 #include <asm/machvec.h>
 #include <asm/addrspace.h>
-#include <asm/lboxre2.h>
+#include <mach/lboxre2.h>
 #include <asm/io.h>
 
 static struct resource cf_ide_resources[] = {
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 9f8a540..52dd748 100644
--- a/arch/sh/boards/mach-microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
@@ -15,7 +15,7 @@
 #include <linux/pci.h>
 #include <linux/wait.h>
 #include <asm/io.h>
-#include <asm/microdev.h>
+#include <mach/microdev.h>
 
 	/*
 	 *	we need to have a 'safe' address to re-direct all I/O requests
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index 4d33507..702753c 100644
--- a/arch/sh/boards/mach-microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <asm/system.h>
 #include <asm/io.h>
-#include <asm/microdev.h>
+#include <mach/microdev.h>
 
 #define NUM_EXTERNAL_IRQS 16	/* IRL0 .. IRL15 */
 
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index fc8cd06..a9202fe 100644
--- a/arch/sh/boards/mach-microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
@@ -14,7 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <video/s1d13xxxfb.h>
-#include <asm/microdev.h>
+#include <mach/microdev.h>
 #include <asm/io.h>
 #include <asm/machvec.h>
 
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
index 6e96095..de9014a 100644
--- a/arch/sh/boards/mach-migor/lcd_qvga.c
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -17,8 +17,10 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/sh_mobile_lcdc.h>
-#include <asm/migor.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <cpu/sh7722.h>
+#include <mach/migor.h>
 
 /* LCD Module is a PH240320T according to board schematics. This module
  * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
@@ -30,9 +32,9 @@
 
 static void reset_lcd_module(void)
 {
-	ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
+	gpio_set_value(GPIO_PTH2, 0);
 	mdelay(2);
-	ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
+	gpio_set_value(GPIO_PTH2, 1);
 	mdelay(1);
 }
 
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 714dce9..9752819 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -17,14 +17,16 @@
 #include <linux/smc91x.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
+#include <video/sh_mobile_lcdc.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
-#include <asm/sh_mobile_lcdc.h>
-#include <asm/migor.h>
+#include <mach/migor.h>
+#include <cpu/sh7722.h>
 
 /* Address     IRQ  Size  Bus  Description
  * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
@@ -35,7 +37,7 @@
  */
 
 static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT,
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 };
 
 static struct resource smc91x_eth_resources[] = {
@@ -169,7 +171,7 @@ static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
 
 static int migor_nand_flash_ready(struct mtd_info *mtd)
 {
-	return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
+	return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
 }
 
 struct platform_nand_data migor_nand_flash_data = {
@@ -286,22 +288,18 @@ static struct clk *camera_clk;
 
 static void camera_power_on(void)
 {
-	unsigned char value;
-
+	/* Use 10 MHz VIO_CKO instead of 24 MHz to work
+	 * around signal quality issues on Panel Board V2.1.
+	 */
 	camera_clk = clk_get(NULL, "video_clk");
-	clk_set_rate(camera_clk, 24000000);
+	clk_set_rate(camera_clk, 10000000);
 	clk_enable(camera_clk);	/* start VIO_CKO */
 
+	/* use VIO_RST to take camera out of reset */
 	mdelay(10);
-	value = ctrl_inb(PORT_PTDR);
-	value &= ~0x09;
-#ifndef CONFIG_SH_MIGOR_RTA_WVGA
-	value |= 0x01;
-#endif
-	ctrl_outb(value, PORT_PTDR);
+	gpio_set_value(GPIO_PTT3, 0);
 	mdelay(10);
-
-	ctrl_outb(value | 8, PORT_PTDR);
+	gpio_set_value(GPIO_PTT3, 1);
 }
 
 static void camera_power_off(void)
@@ -309,13 +307,21 @@ static void camera_power_off(void)
 	clk_disable(camera_clk); /* stop VIO_CKO */
 	clk_put(camera_clk);
 
-	ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
+	gpio_set_value(GPIO_PTT3, 0);
+}
+
+static void camera_power(int mode)
+{
+	if (mode)
+		camera_power_on();
+	else
+		camera_power_off();
 }
 
 #ifdef CONFIG_I2C
 static unsigned char camera_ov772x_magic[] =
 {
-	0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
+	0x09, 0x01, 0x0c, 0x20, 0x0d, 0x41, 0x0e, 0x01,
 	0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
 	0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
 	0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
@@ -391,6 +397,7 @@ static struct soc_camera_platform_info ov772x_info = {
 	},
 	.bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
 	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.power = camera_power,
 	.set_capture = ov772x_set_capture,
 };
 
@@ -405,8 +412,6 @@ static struct platform_device migor_camera_device = {
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
 	| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
-	.enable_camera = camera_power_on,
-	.disable_camera = camera_power_off,
 };
 
 static struct resource migor_ceu_resources[] = {
@@ -458,75 +463,135 @@ static struct i2c_board_info migor_i2c_devices[] = {
 
 static int __init migor_devices_setup(void)
 {
+	/* Lit D11 LED */
+	gpio_request(GPIO_PTJ7, NULL);
+	gpio_direction_output(GPIO_PTJ7, 1);
+	gpio_export(GPIO_PTJ7, 0);
+
+	/* Lit D12 LED */
+	gpio_request(GPIO_PTJ5, NULL);
+	gpio_direction_output(GPIO_PTJ5, 1);
+	gpio_export(GPIO_PTJ5, 0);
+
+	/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
+	gpio_request(GPIO_FN_IRQ0, NULL);
+	ctrl_outl(0x00003400, BSC_CS4BCR);
+	ctrl_outl(0x00110080, BSC_CS4WCR);
+
+	/* KEYSC */
 	clk_always_enable("mstp214"); /* KEYSC */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN1, NULL);
+	gpio_request(GPIO_FN_KEYIN2, NULL);
+	gpio_request(GPIO_FN_KEYIN3, NULL);
+	gpio_request(GPIO_FN_KEYIN4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
+	/* NAND Flash */
+	gpio_request(GPIO_FN_CS6A_CE2B, NULL);
+	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
+	gpio_request(GPIO_PTA1, NULL);
+	gpio_direction_input(GPIO_PTA1);
+
+	/* Touch Panel */
+	gpio_request(GPIO_FN_IRQ6, NULL);
+
+	/* LCD Panel */
 	clk_always_enable("mstp200"); /* LCDC */
+#ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
+	gpio_request(GPIO_FN_LCDD17, NULL);
+	gpio_request(GPIO_FN_LCDD16, NULL);
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDRS, NULL);
+	gpio_request(GPIO_FN_LCDCS, NULL);
+	gpio_request(GPIO_FN_LCDRD, NULL);
+	gpio_request(GPIO_FN_LCDWR, NULL);
+	gpio_request(GPIO_PTH2, NULL); /* LCD_DON */
+	gpio_direction_output(GPIO_PTH2, 1);
+#endif
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA /* LCDC - WVGA - Enable RGB Interface signals */
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDLCLK, NULL);
+	gpio_request(GPIO_FN_LCDDCK, NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDVSYN, NULL);
+	gpio_request(GPIO_FN_LCDHSYN, NULL);
+	gpio_request(GPIO_FN_LCDDISP, NULL);
+	gpio_request(GPIO_FN_LCDDON, NULL);
+#endif
+
+	/* CEU */
 	clk_always_enable("mstp203"); /* CEU */
+	gpio_request(GPIO_FN_VIO_CLK2, NULL);
+	gpio_request(GPIO_FN_VIO_VD2, NULL);
+	gpio_request(GPIO_FN_VIO_HD2, NULL);
+	gpio_request(GPIO_FN_VIO_FLD, NULL);
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO_D15, NULL);
+	gpio_request(GPIO_FN_VIO_D14, NULL);
+	gpio_request(GPIO_FN_VIO_D13, NULL);
+	gpio_request(GPIO_FN_VIO_D12, NULL);
+	gpio_request(GPIO_FN_VIO_D11, NULL);
+	gpio_request(GPIO_FN_VIO_D10, NULL);
+	gpio_request(GPIO_FN_VIO_D9, NULL);
+	gpio_request(GPIO_FN_VIO_D8, NULL);
+
+	gpio_request(GPIO_PTT3, NULL); /* VIO_RST */
+	gpio_direction_output(GPIO_PTT3, 0);
+	gpio_request(GPIO_PTT2, NULL); /* TV_IN_EN */
+	gpio_direction_output(GPIO_PTT2, 1);
+	gpio_request(GPIO_PTT0, NULL); /* CAM_EN */
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	gpio_direction_output(GPIO_PTT0, 0);
+#else
+	gpio_direction_output(GPIO_PTT0, 1);
+#endif
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
 
 	platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
 
 	i2c_register_board_info(0, migor_i2c_devices,
 				ARRAY_SIZE(migor_i2c_devices));
- 
+
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 __initcall(migor_devices_setup);
 
 static void __init migor_setup(char **cmdline_p)
 {
-	/* SMC91C111 - Enable IRQ0 */
-	ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
-
-	/* KEYSC */
-	ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
-	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
-	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-
-	/* NAND Flash */
-	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
-	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
-		  BSC_CS6ABCR);
-
-	/* Touch Panel - Enable IRQ6 */
-	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
-	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
-	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
-
-#ifdef CONFIG_SH_MIGOR_RTA_WVGA
-	/* LCDC - WVGA - Enable RGB Interface signals */
-	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
-	ctrl_outw(0x0000, PORT_PHCR);
-	ctrl_outw(0x0000, PORT_PLCR);
-	ctrl_outw(0x0000, PORT_PMCR);
-	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR);
-	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD);
-	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
-#endif
-#ifdef CONFIG_SH_MIGOR_QVGA
-	/* LCDC - QVGA - Enable SYS Interface signals */
-	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
-	ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR);
-	ctrl_outw(0x0000, PORT_PLCR);
-	ctrl_outw(0x0000, PORT_PMCR);
-	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR);
-	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD);
-	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
-#endif
-
-	/* CEU */
-	ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR);
-	ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR);
-	ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR);
-	ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR);
-	ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC);
-	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD);
-	ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE);
-	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB);
 }
 
 static struct sh_machine_vector mv_migor __initmv = {
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 8e49f6e..c70fece 100644
--- a/arch/sh/boards/mach-r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
@@ -13,7 +13,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <asm/rts7751r2d.h>
+#include <mach/r2d.h>
 
 #define R2D_NR_IRL 13
 
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index 2308e87..c585be0 100644
--- a/arch/sh/boards/mach-r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
@@ -18,7 +18,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <asm/machvec.h>
-#include <asm/rts7751r2d.h>
+#include <mach/r2d.h>
 #include <asm/io.h>
 #include <asm/io_trapped.h>
 #include <asm/spi.h>
diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 87cdc57..8555581 100644
--- a/arch/sh/boards/mach-sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/sdk7780.h>
+#include <mach/sdk7780.h>
 
 enum {
 	UNUSED = 0,
diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index acc5932..aad94a7 100644
--- a/arch/sh/boards/mach-sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <asm/machvec.h>
-#include <asm/sdk7780.h>
+#include <mach/sdk7780.h>
 #include <asm/heartbeat.h>
 #include <asm/io.h>
 #include <asm/addrspace.h>
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
index fd850ba..d8ebfa7 100644
--- a/arch/sh/boards/mach-sh7763rdp/irq.c
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/sh7763rdp.h>
+#include <mach/sh7763rdp.h>
 
 #define INTC_BASE		(0xFFD00000)
 #define INTC_INT2PRI7   (INTC_BASE+0x4001C)
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 23850da..6f926fd 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -17,7 +17,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/fb.h>
 #include <linux/io.h>
-#include <asm/sh7763rdp.h>
+#include <mach/sh7763rdp.h>
 #include <asm/sh_eth.h>
 #include <asm/sh7760fb.h>
 
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
index a5e349d..a3277a2 100644
--- a/arch/sh/boards/mach-snapgear/setup.c
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -19,7 +19,7 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <asm/machvec.h>
-#include <asm/snapgear.h>
+#include <mach/snapgear.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <cpu/timer.h>
diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index 1b767e1..dec3db0 100644
--- a/arch/sh/boards/mach-systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
@@ -9,7 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <asm/systemh7751.h>
+#include <mach/systemh7751.h>
 #include <asm/addrspace.h>
 #include <asm/io.h>
 
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
index 601c9c8..5384068 100644
--- a/arch/sh/boards/mach-systemh/irq.c
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 
 #include <asm/io.h>
-#include <asm/systemh7751.h>
+#include <mach/systemh7751.h>
 #include <asm/smc37c93x.h>
 
 /* address of external interrupt mask register
diff --git a/arch/sh/boards/mach-systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
index ee78af8..219fd80 100644
--- a/arch/sh/boards/mach-systemh/setup.c
+++ b/arch/sh/boards/mach-systemh/setup.c
@@ -16,7 +16,7 @@
  */
 #include <linux/init.h>
 #include <asm/machvec.h>
-#include <asm/systemh7751.h>
+#include <mach/systemh7751.h>
 
 extern void make_systemh_irq(unsigned int irq);
 
diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4730c1d..4badad4 100644
--- a/arch/sh/boards/mach-titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
@@ -4,7 +4,7 @@
 #include <linux/pci.h>
 #include <asm/machvec.h>
 #include <asm/addrspace.h>
-#include <asm/titan.h>
+#include <mach/titan.h>
 #include <asm/io.h>
 
 static inline unsigned int port2adr(unsigned int port)
diff --git a/arch/sh/boards/mach-titan/setup.c b/arch/sh/boards/mach-titan/setup.c
index 5de3b2a..81e7e0f 100644
--- a/arch/sh/boards/mach-titan/setup.c
+++ b/arch/sh/boards/mach-titan/setup.c
@@ -9,7 +9,7 @@
  */
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <asm/titan.h>
+#include <mach/titan.h>
 #include <asm/io.h>
 
 static void __init init_titan_irq(void)
diff --git a/arch/sh/boot/.gitignore b/arch/sh/boot/.gitignore
index b6718de..aad5edd 100644
--- a/arch/sh/boot/.gitignore
+++ b/arch/sh/boot/.gitignore
@@ -1 +1,4 @@
 zImage
+vmlinux.srec
+uImage
+uImage.srec
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 5b54965..c16ccd4 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -33,10 +33,16 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
+ifeq ($(CONFIG_32BIT),y)
+KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_PAGE_OFFSET)  + \
+			$(CONFIG_ZERO_PAGE_OFFSET)]')
+else
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(CONFIG_MEMORY_START) + \
 			$(CONFIG_ZERO_PAGE_OFFSET)]')
+endif
 
 KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32
index 47685f6..301e6d5 100644
--- a/arch/sh/boot/compressed/Makefile_32
+++ b/arch/sh/boot/compressed/Makefile_32
@@ -23,6 +23,11 @@ IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
 
 LIBGCC	:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
+ifeq ($(CONFIG_FTRACE),y)
+ORIG_CFLAGS := $(KBUILD_CFLAGS)
+KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
+endif
+
 LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds
 
 $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
index f386997..efdba6b 100644
--- a/arch/sh/boot/compressed/misc_32.c
+++ b/arch/sh/boot/compressed/misc_32.c
@@ -191,7 +191,7 @@ long* stack_start = &user_stack[STACK_SIZE];
 
 void decompress_kernel(void)
 {
-	output_data = 0;
+	output_data = NULL;
 	output_ptr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
 #ifdef CONFIG_29BIT
 	output_ptr |= P2SEG;
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 851c870..874dd97 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Tue Aug 26 14:21:17 2008
+# Linux kernel version: 2.6.27
+# Tue Oct 21 18:20:06 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,11 +13,12 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -72,22 +73,20 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -120,6 +119,7 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -190,12 +190,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -289,6 +290,8 @@ CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -339,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -359,11 +363,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -455,7 +458,15 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_SH_FLCTL=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -541,6 +552,9 @@ CONFIG_SMC911X=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -645,6 +659,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -692,6 +707,8 @@ CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -705,12 +722,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -743,6 +761,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -785,6 +804,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -855,7 +875,12 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -866,14 +891,19 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -946,13 +976,17 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig
index a05b278..e21c0e8 100644
--- a/arch/sh/configs/cayman_defconfig
+++ b/arch/sh/configs/cayman_defconfig
@@ -1,22 +1,25 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 23 14:15:55 2007
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:04:52 2008
 #
 CONFIG_SUPERH=y
 # CONFIG_SUPERH32 is not set
 CONFIG_SUPERH64=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/cayman_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -36,17 +39,15 @@ CONFIG_SWAP=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -60,21 +61,33 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -85,6 +98,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -98,13 +112,18 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
 CONFIG_CPU_SH5=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -113,6 +132,7 @@ CONFIG_CPU_SH5=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -121,12 +141,15 @@ CONFIG_CPU_SH5=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 CONFIG_CPU_SUBTYPE_SH5_101=y
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -147,7 +170,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -161,11 +186,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -196,7 +223,6 @@ CONFIG_SH_CAYMAN=y
 #
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=50000000
-# CONFIG_TICK_ONESHOT is not set
 
 #
 # CPU Frequency scaling
@@ -225,13 +251,12 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-CONFIG_GUSA=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # Boot options
@@ -257,11 +282,9 @@ CONFIG_PCI_LEGACY=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -274,6 +297,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -303,8 +327,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -312,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -328,14 +351,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -371,14 +394,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -438,6 +465,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -449,6 +477,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -456,18 +485,20 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -486,13 +517,19 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -500,15 +537,17 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -517,6 +556,9 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -524,13 +566,13 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -575,10 +617,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -603,16 +648,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -620,31 +663,47 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -653,16 +712,12 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -671,6 +726,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -700,6 +756,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -709,9 +766,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -719,6 +779,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 
 #
 # PCI-based Watchdog Cards
@@ -735,35 +796,71 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 CONFIG_VIDEO_DEV=m
-# CONFIG_VIDEO_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
 # CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_MXB is not set
 # CONFIG_VIDEO_HEXIUM_ORION is not set
 # CONFIG_VIDEO_HEXIUM_GEMINI is not set
 # CONFIG_VIDEO_CX88 is not set
 # CONFIG_VIDEO_CX23885 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CX18 is not set
 # CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_SOC_CAMERA is not set
 # CONFIG_RADIO_ADAPTERS is not set
-CONFIG_DVB_CORE=y
-# CONFIG_DVB_CORE_ATTACH is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
 # Supported SAA7146 based PCI Adapters
 #
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_AV7110 is not set
+# CONFIG_DVB_BUDGET_CORE is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -780,6 +877,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_PLUTO2 is not set
 
 #
+# Supported SDMC DM1105 Adapters
+#
+# CONFIG_DVB_DM1105 is not set
+
+#
 # Supported DVB Frontends
 #
 
@@ -791,14 +893,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # DVB-S (satellite) frontends
 #
-# CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_CX24110 is not set
 # CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0288 is not set
+# CONFIG_DVB_STB6000 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
+# CONFIG_DVB_CX24116 is not set
+# CONFIG_DVB_SI21XX is not set
 
 #
 # DVB-T (terrestrial) frontends
@@ -807,6 +916,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -816,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_DIB3000MC is not set
 # CONFIG_DVB_DIB7000M is not set
 # CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
 
 #
 # DVB-C (cable) frontends
@@ -834,25 +945,28 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
 # CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
 
 #
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
 # CONFIG_DVB_TUNER_DIB0070 is not set
 
 #
-# Miscellaneous devices
+# SEC control devices for DVB-S
 #
 # CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
 # CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
+# CONFIG_DVB_LGS8GL5 is not set
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 
 #
@@ -864,15 +978,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -897,6 +1012,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -905,7 +1021,10 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -938,38 +1057,42 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -981,22 +1104,20 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1020,6 +1141,7 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1039,8 +1161,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1048,14 +1173,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1087,9 +1211,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1098,6 +1219,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1105,9 +1227,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1123,15 +1248,20 @@ CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1147,8 +1277,93 @@ CONFIG_SH64_SR_WATCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
@@ -1156,6 +1371,7 @@ CONFIG_SH64_SR_WATCH=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 3dc1cbd..be4c2e0 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Mon Aug  4 16:49:13 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:18:02 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,12 +13,13 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -70,7 +71,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -78,15 +81,12 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -119,6 +119,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -192,12 +193,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -230,7 +232,6 @@ CONFIG_SH_DREAMCAST=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=49876504
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -318,6 +319,8 @@ CONFIG_PCI_LEGACY=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -365,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -385,11 +389,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -480,6 +483,9 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -504,6 +510,7 @@ CONFIG_8139TOO=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -559,6 +566,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -626,6 +634,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_SH_WDT=y
 # CONFIG_SH_WDT_MMAP is not set
 
@@ -647,6 +656,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -673,6 +684,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -707,6 +719,7 @@ CONFIG_FB_PVR2=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -718,6 +731,7 @@ CONFIG_FB_PVR2=y
 # CONFIG_FB_CARMINE is not set
 # CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -755,6 +769,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -764,6 +784,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -775,16 +799,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -814,6 +840,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -872,6 +899,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -882,12 +914,14 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -960,6 +994,11 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -967,7 +1006,6 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
new file mode 100644
index 0000000..1580068
--- /dev/null
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -0,0 +1,1090 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:20:09 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="_edosk7760"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+CONFIG_CPU_SUBTYPE_SH7760=y
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_EDOSK7760=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=4
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+# CONFIG_SH_DMABRG is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x02000000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+CONFIG_DEBUG_DRIVER=y
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_MAP_BANK_WIDTH_8=y
+CONFIG_MTD_MAP_BANK_WIDTH_16=y
+CONFIG_MTD_MAP_BANK_WIDTH_32=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_I8=y
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_ABSENT=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=26000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH7760=y
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_SH7760 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_SUPERH=y
+CONFIG_SND_SOC=y
+
+#
+# SoC Audio support for SuperH
+#
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 41e25b3..1032b23 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:24:57 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:23:53 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,18 +11,19 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -67,22 +68,21 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -108,6 +108,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -175,12 +176,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -212,7 +214,6 @@ CONFIG_SH_HP6XX=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=22110000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -257,6 +258,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -292,6 +294,8 @@ CONFIG_PCMCIA_PROBE=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
@@ -304,10 +308,6 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
 # CONFIG_NET is not set
 
 #
@@ -446,7 +446,6 @@ CONFIG_TOUCHSCREEN_HP600=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -522,6 +521,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -546,6 +547,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -568,6 +570,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_HIT=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_ILI9320 is not set
@@ -630,12 +633,15 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -644,6 +650,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -652,10 +659,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -687,6 +695,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
@@ -774,6 +783,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -784,14 +798,19 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -863,13 +882,17 @@ CONFIG_CRYPTO_MD5=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 99cc39c..b82dfb4 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:35:07 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:25:51 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,22 +69,22 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -115,6 +116,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -182,12 +184,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -225,7 +228,6 @@ CONFIG_SH_LANDISK=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -261,6 +263,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -309,11 +312,9 @@ CONFIG_PCCARD_NONSTATIC=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -360,7 +361,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -374,10 +374,12 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -386,6 +388,7 @@ CONFIG_IP_NF_QUEUE=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -408,11 +411,10 @@ CONFIG_ATALK=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -462,22 +464,20 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -640,6 +640,9 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -660,6 +663,7 @@ CONFIG_8139CP=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -680,9 +684,11 @@ CONFIG_NETDEV_1000=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -692,6 +698,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -727,7 +734,7 @@ CONFIG_USB_RTL8150=m
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -838,6 +845,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -861,10 +870,12 @@ CONFIG_VIDEO_V4L2=m
 CONFIG_VIDEO_V4L1=m
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_SOC_CAMERA is not set
 CONFIG_V4L_USB_DRIVERS=y
 # CONFIG_USB_VIDEO_CLASS is not set
 # CONFIG_USB_GSPCA is not set
@@ -884,14 +895,13 @@ CONFIG_USB_PWC=m
 # CONFIG_USB_ZR364XX is not set
 # CONFIG_USB_STKWEBCAM is not set
 # CONFIG_USB_S2255 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_GEMTEK_PCI is not set
 # CONFIG_RADIO_MAXIRADIO is not set
 # CONFIG_RADIO_MAESTRO is not set
 CONFIG_USB_DSBR=m
 # CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
 # CONFIG_DAB is not set
 
 #
@@ -914,6 +924,7 @@ CONFIG_USB_DSBR=m
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
@@ -925,8 +936,7 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
 
 #
@@ -934,6 +944,34 @@ CONFIG_USB_HID=m
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -951,6 +989,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -975,6 +1014,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1004,7 +1044,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1059,7 +1098,7 @@ CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1078,6 +1117,7 @@ CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1087,6 +1127,7 @@ CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1098,7 +1139,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
@@ -1107,6 +1148,7 @@ CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1143,6 +1185,7 @@ CONFIG_NTFS_RW=y
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1185,6 +1228,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1256,6 +1300,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1267,12 +1316,14 @@ CONFIG_SH_STANDARD_BIOS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1345,6 +1396,11 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1352,7 +1408,6 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index aecdfd3..c3ecedf 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:39:41 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:29:42 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,22 +69,22 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -115,6 +116,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -182,12 +184,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -225,7 +228,6 @@ CONFIG_SH_LBOX_RE2=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=40000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -261,6 +263,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -309,11 +312,9 @@ CONFIG_PCCARD_NONSTATIC=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -360,7 +361,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -374,10 +374,12 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -386,6 +388,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -406,11 +409,10 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -631,6 +633,9 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -655,6 +660,7 @@ CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -675,9 +681,11 @@ CONFIG_NETDEV_1000=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -687,6 +695,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -832,6 +841,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -872,6 +883,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -881,6 +898,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -911,12 +932,15 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -925,6 +949,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -936,12 +961,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -974,6 +1000,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1071,6 +1098,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1082,12 +1114,14 @@ CONFIG_SH_STANDARD_BIOS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1160,6 +1194,11 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1167,7 +1206,6 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index a3a80f3..499ed72 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:41:08 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:32:23 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,16 +11,17 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -55,7 +56,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -72,22 +72,22 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -119,6 +119,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -186,12 +187,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -229,7 +231,6 @@ CONFIG_SH_MAGIC_PANEL_R2_VERSION=3
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=24000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -268,6 +269,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -291,11 +293,9 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -340,6 +340,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -360,11 +361,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -513,6 +513,9 @@ CONFIG_SMC911X=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -560,11 +563,13 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -641,6 +646,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -703,12 +710,15 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -717,6 +727,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -726,11 +737,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -759,6 +771,7 @@ CONFIG_JBD=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -806,6 +819,7 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -899,10 +913,22 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -938,6 +964,7 @@ CONFIG_KGDB_DEFBITS_8=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
@@ -945,7 +972,6 @@ CONFIG_KGDB_DEFBITS_8=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e4b900e..b8ada8c 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:47:16 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:37:41 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,16 +11,17 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,22 +70,21 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -110,6 +110,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -183,12 +184,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -221,7 +223,6 @@ CONFIG_SH_SH4202_MICRODEV=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -260,6 +261,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -287,11 +289,9 @@ CONFIG_SUPERHYWAY=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -340,6 +340,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -360,11 +361,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -402,19 +402,17 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=1
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -451,6 +449,9 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
@@ -542,6 +543,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -581,6 +584,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -591,6 +598,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -602,12 +610,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -640,6 +649,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -678,6 +688,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -748,6 +759,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -758,14 +774,19 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -837,13 +858,17 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 4f8b197..624c47a 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Tue Aug 26 14:18:17 2008
+# Linux kernel version: 2.6.27
+# Tue Oct 21 12:57:28 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,12 +13,13 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -70,7 +71,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -78,15 +81,12 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -118,6 +118,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -179,6 +180,7 @@ CONFIG_MAX_ACTIVE_REGIONS=2
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -192,13 +194,14 @@ CONFIG_SPARSEMEM=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -235,7 +238,6 @@ CONFIG_SH_MIGOR_QVGA=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -295,6 +297,8 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -345,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -365,11 +370,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -555,6 +559,9 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -599,6 +606,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -656,6 +664,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -709,6 +718,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -717,13 +728,44 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
 # Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
 #
@@ -748,6 +790,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -755,7 +803,6 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
@@ -764,21 +811,23 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 # CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
-# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
@@ -831,12 +880,15 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -848,16 +900,19 @@ CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -886,6 +941,7 @@ CONFIG_UIO_PDRV_GENIRQ=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -938,6 +994,11 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -950,12 +1011,14 @@ CONFIG_EARLY_PRINTK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1028,13 +1091,17 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 57a3007..2e65149 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:51:13 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 20:03:46 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -77,7 +78,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -85,15 +88,13 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -124,6 +125,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -199,12 +201,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -242,7 +245,6 @@ CONFIG_SH_R7780MP=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
 CONFIG_SH_PCLK_FREQ=32000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -278,6 +280,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -309,11 +312,9 @@ CONFIG_PCI_LEGACY=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -369,6 +370,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -390,11 +392,10 @@ CONFIG_LLC=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -616,6 +617,9 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
 # CONFIG_AMD8111_ETH is not set
@@ -641,11 +645,11 @@ CONFIG_8139TOO_8129=y
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
@@ -662,9 +666,11 @@ CONFIG_R8169=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -674,6 +680,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -773,24 +780,129 @@ CONFIG_HW_RANDOM=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_HIGHLANDER=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -810,6 +922,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -841,12 +956,19 @@ CONFIG_DAB=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -856,6 +978,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -880,18 +1006,37 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
 # SPI RTC drivers
 #
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -900,6 +1045,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -911,13 +1057,14 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -952,6 +1099,7 @@ CONFIG_NTFS_RW=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -994,6 +1142,7 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1088,10 +1237,22 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1108,15 +1269,19 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1189,6 +1354,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1196,7 +1366,6 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 1d09d24..043a8a5 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 00:59:19 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 16:25:30 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,18 +11,19 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -38,11 +39,13 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -67,31 +70,33 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
+CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
-CONFIG_OPROFILE=m
+CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -120,7 +125,8 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_CLASSIC_RCU is not set
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -182,6 +188,7 @@ CONFIG_MAX_ACTIVE_REGIONS=2
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -200,13 +207,15 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -243,15 +252,30 @@ CONFIG_SH_R7785RP=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
 CONFIG_SH_PCLK_FREQ=50000000
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
 #
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
 
 #
 # DMA support
@@ -276,13 +300,15 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -301,7 +327,7 @@ CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -310,11 +336,9 @@ CONFIG_PCI_LEGACY=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
 
 #
@@ -370,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -386,16 +411,16 @@ CONFIG_LLC=m
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -617,8 +642,12 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -639,9 +668,11 @@ CONFIG_R8169=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -651,6 +682,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -750,24 +782,129 @@ CONFIG_HW_RANDOM=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_HIGHLANDER=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -787,6 +924,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -813,6 +953,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
@@ -846,6 +987,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -857,6 +999,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CARMINE is not set
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -865,12 +1008,19 @@ CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -880,6 +1030,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -904,18 +1058,37 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
 # SPI RTC drivers
 #
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -924,6 +1097,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -935,13 +1109,14 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -976,6 +1151,7 @@ CONFIG_NTFS_RW=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1018,6 +1194,7 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1094,6 +1271,8 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_LOCK_ALLOC=y
@@ -1113,10 +1292,23 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1133,15 +1325,19 @@ CONFIG_4KSTACKS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1214,6 +1410,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1221,7 +1422,6 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1229,6 +1429,8 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 840fe38..85b0ac4 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Mon Jul 28 22:23:03 2008
+# Linux kernel version: 2.6.27
+# Tue Oct 21 12:58:47 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -56,7 +58,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -72,7 +73,9 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
@@ -80,14 +83,12 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -117,6 +118,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -183,10 +185,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 
@@ -219,7 +221,6 @@ CONFIG_SH_CMT=y
 CONFIG_SH_TIMER_IRQ=142
 CONFIG_SH_PCLK_FREQ=16670800
 CONFIG_SH_CLK_MD=0
-# CONFIG_TICK_ONESHOT is not set
 
 #
 # CPU Frequency scaling
@@ -266,6 +267,7 @@ CONFIG_HZ=1000
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -292,11 +294,8 @@ CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -339,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -359,11 +359,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -442,7 +441,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -509,6 +507,9 @@ CONFIG_SMC911X=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -541,7 +542,7 @@ CONFIG_SMC911X=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -615,6 +616,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -655,9 +658,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -675,6 +705,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -691,6 +722,7 @@ CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -705,7 +737,6 @@ CONFIG_USB_R8A66597_HCD=y
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -718,7 +749,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -735,6 +766,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -762,12 +794,15 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -776,16 +811,18 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -847,6 +884,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -905,10 +943,21 @@ CONFIG_DEBUG_WRITECOUNT=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -924,6 +973,7 @@ CONFIG_DEBUG_STACK_USAGE=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
@@ -931,7 +981,6 @@ CONFIG_DEBUG_STACK_USAGE=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 8413236..7d2a9e8 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:55:52 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:44:36 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -69,7 +70,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -77,15 +80,13 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -116,6 +117,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -183,12 +185,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -232,7 +235,6 @@ CONFIG_RTS7751R2D_1=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -268,6 +270,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -302,11 +305,9 @@ CONFIG_HOTPLUG_PCI=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -353,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -373,11 +375,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -598,6 +599,9 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -622,6 +626,7 @@ CONFIG_8139TOO=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -642,9 +647,11 @@ CONFIG_NETDEV_1000=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -654,6 +661,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -688,7 +696,7 @@ CONFIG_NETDEV_10000=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -776,11 +784,13 @@ CONFIG_SPI_SH_SCI=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
@@ -808,6 +818,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -835,6 +847,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -868,6 +881,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -880,6 +894,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -905,6 +920,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1005,9 +1021,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1025,6 +1068,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1047,6 +1091,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1076,7 +1121,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1089,7 +1133,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1105,6 +1149,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1134,16 +1179,20 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1152,6 +1201,7 @@ CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1160,10 +1210,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1196,6 +1247,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1293,6 +1345,11 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1305,12 +1362,14 @@ CONFIG_EARLY_PRINTK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1383,6 +1442,11 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1390,7 +1454,6 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 7d9fa6e..f680d3e 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:59:18 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:47:39 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -69,7 +70,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -77,15 +80,13 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -116,6 +117,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -183,12 +185,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -232,7 +235,6 @@ CONFIG_RTS7751R2D_PLUS=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -268,6 +270,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -302,11 +305,9 @@ CONFIG_HOTPLUG_PCI=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -353,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -373,11 +375,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -598,6 +599,9 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -622,6 +626,7 @@ CONFIG_8139TOO=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -642,9 +647,11 @@ CONFIG_NETDEV_1000=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -654,6 +661,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -688,7 +696,7 @@ CONFIG_NETDEV_10000=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -776,11 +784,13 @@ CONFIG_SPI_SH_SCI=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
@@ -808,6 +818,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -835,6 +847,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -868,6 +881,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -880,6 +894,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -905,6 +920,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1005,9 +1021,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1025,6 +1068,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1047,6 +1091,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1076,7 +1121,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1089,7 +1133,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1105,6 +1149,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1134,16 +1179,20 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1152,6 +1201,7 @@ CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1160,10 +1210,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1196,6 +1247,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1293,6 +1345,11 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1305,12 +1362,14 @@ CONFIG_EARLY_PRINTK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1383,6 +1442,11 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1390,7 +1454,6 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rts7751r2dplus_qemu_defconfig b/arch/sh/configs/rts7751r2dplus_qemu_defconfig
new file mode 100644
index 0000000..ae8f630
--- /dev/null
+++ b/arch/sh/configs/rts7751r2dplus_qemu_defconfig
@@ -0,0 +1,949 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:51:20 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_IO_TRAPPED=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+CONFIG_SH_RTS7751R2D=y
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# RTS7751R2D Board Revision
+#
+CONFIG_RTS7751R2D_PLUS=y
+# CONFIG_RTS7751R2D_1 is not set
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=60000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00010000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+# CONFIG_SND_SOC is not set
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+CONFIG_RTC_DRV_R9701=y
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 6d834f2..543287b 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 02:00:12 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:53:22 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -56,7 +57,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -73,7 +73,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -81,15 +83,13 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -121,6 +121,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -196,12 +197,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -273,9 +275,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -328,11 +331,9 @@ CONFIG_HOTPLUG_PCI=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -406,6 +407,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -424,6 +426,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -456,11 +459,10 @@ CONFIG_NET_SCH_FIFO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -510,21 +512,19 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -748,9 +748,13 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -790,7 +794,7 @@ CONFIG_NET_POLL_CONTROLLER=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -825,6 +829,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -923,6 +928,8 @@ CONFIG_SSB_DRIVER_PCICORE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -949,6 +956,7 @@ CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
@@ -982,6 +990,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -993,6 +1002,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CARMINE is not set
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1022,6 +1032,7 @@ CONFIG_LOGO_SUPERH_MONO=y
 CONFIG_LOGO_SUPERH_VGA16=y
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
 CONFIG_HID_SUPPORT=y
@@ -1033,9 +1044,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1053,6 +1091,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1074,6 +1113,7 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1103,7 +1143,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1117,7 +1156,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1135,6 +1174,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1155,6 +1195,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1168,12 +1209,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1211,6 +1253,7 @@ CONFIG_NTFS_RW=y
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -1252,6 +1295,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1349,10 +1393,23 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1369,12 +1426,14 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1448,6 +1507,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1455,7 +1519,6 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index af15cbe..25717ff 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 02:06:07 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:57:39 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,16 +11,17 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -45,6 +46,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_DEBUG=y
 CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_FREEZER is not set
 CONFIG_CGROUP_DEVICE=y
 # CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
@@ -80,7 +82,9 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
@@ -88,14 +92,12 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -126,6 +128,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -192,10 +195,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 
@@ -228,7 +231,6 @@ CONFIG_SH_CMT=y
 CONFIG_SH_TIMER_IRQ=140
 CONFIG_SH_PCLK_FREQ=33333333
 CONFIG_SH_CLK_MD=6
-# CONFIG_TICK_ONESHOT is not set
 
 #
 # CPU Frequency scaling
@@ -275,6 +277,7 @@ CONFIG_HZ=1000
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -307,11 +310,8 @@ CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -381,11 +382,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -461,7 +461,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x20000000
 CONFIG_MTD_PHYSMAP_LEN=0x01000000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -531,6 +530,9 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -609,6 +611,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -666,12 +670,15 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -680,6 +687,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -687,10 +695,11 @@ CONFIG_RTC_DRV_SH=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -755,6 +764,7 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -811,10 +821,19 @@ CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -828,12 +847,14 @@ CONFIG_DEBUG_STACK_USAGE=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -907,13 +928,17 @@ CONFIG_CRYPTO_ALGAPI=y
 #
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 4e30b70..075f42e 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 02:08:38 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:00:21 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,16 +11,17 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,22 +72,22 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -117,6 +118,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -186,12 +188,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -225,7 +228,6 @@ CONFIG_SH_7343_SOLUTION_ENGINE=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=27000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -261,6 +263,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -284,11 +287,9 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -334,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -354,11 +356,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -529,6 +530,9 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
@@ -632,6 +636,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -655,11 +661,11 @@ CONFIG_VIDEO_V4L2=y
 CONFIG_VIDEO_V4L1=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_DAB is not set
 
@@ -671,6 +677,7 @@ CONFIG_RADIO_ADAPTERS=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
@@ -692,6 +699,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -706,6 +714,7 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -734,6 +743,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -742,6 +757,7 @@ CONFIG_HID=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -753,12 +769,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -787,6 +804,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -837,6 +855,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -868,6 +887,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -880,12 +904,14 @@ CONFIG_EARLY_PRINTK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -958,13 +984,17 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 80c1c72..db9cacd 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 02:12:32 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:03:29 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,16 +11,17 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -58,21 +59,20 @@ CONFIG_ANON_INODES=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
@@ -96,6 +96,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -161,10 +162,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 
@@ -196,7 +197,6 @@ CONFIG_SH_CMT=y
 CONFIG_SH_TIMER_IRQ=86
 CONFIG_SH_PCLK_FREQ=31250000
 CONFIG_SH_CLK_MD=5
-# CONFIG_TICK_ONESHOT is not set
 
 #
 # CPU Frequency scaling
@@ -228,6 +228,7 @@ CONFIG_HZ=100
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -253,11 +254,8 @@ CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 # CONFIG_NET is not set
 
 #
@@ -328,7 +326,6 @@ CONFIG_MTD_PHYSMAP_START=0xa0000000
 CONFIG_MTD_PHYSMAP_LEN=0x01000000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_SOLUTIONENGINE is not set
-# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -455,6 +452,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -488,6 +487,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -497,6 +502,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -507,16 +516,18 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
@@ -589,6 +600,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -597,6 +613,7 @@ CONFIG_FRAME_WARN=1024
 # Security options
 #
 # CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
@@ -604,7 +621,6 @@ CONFIG_FRAME_WARN=1024
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 490dcbc..d88190f 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,34 +1,36 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc5
-# Thu Apr 26 09:16:31 2007
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:04:52 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
@@ -36,11 +38,13 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -53,32 +57,45 @@ CONFIG_UID16=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -92,59 +109,18 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7780_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7722_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_LBOX_RE2 is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 CONFIG_CPU_SUBTYPE_SH7705=y
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -152,10 +128,8 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -164,63 +138,62 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 CONFIG_SH7705_CACHE_32KB=y
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-# CONFIG_CF_AREA4 is not set
-CONFIG_CF_BASE_ADDR=0xb8000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -228,18 +201,27 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_ADC is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 
 #
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+# CONFIG_SH_EDOSK7705 is not set
+
+#
 # Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -254,7 +236,6 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -270,55 +251,45 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -326,6 +297,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -347,6 +319,7 @@ CONFIG_IP_PNP_RARP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -354,27 +327,14 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -384,10 +344,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -395,9 +351,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -409,21 +375,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -436,6 +395,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -461,7 +421,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -484,47 +443,29 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -532,73 +473,41 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 CONFIG_STNIC=y
 # CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -609,21 +518,13 @@ CONFIG_PPP_DEFLATE=y
 # CONFIG_PPP_BSDCOMP is not set
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -631,13 +532,13 @@ CONFIG_SLHC=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -647,6 +548,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -664,6 +566,7 @@ CONFIG_SERIO=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -681,153 +584,110 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
+# Special HID drivers
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -836,18 +696,16 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -871,11 +729,11 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
@@ -890,31 +748,33 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -922,40 +782,34 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Distributed Lock Manager
-#
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -964,11 +818,92 @@ CONFIG_LOG_BUF_SHIFT=14
 # Security options
 #
 # CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -976,10 +911,14 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 7be79cd..869ab17 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,24 +1,26 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Wed Jun 18 16:36:08 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:08:12 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -51,7 +53,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -68,17 +69,22 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
@@ -88,12 +94,13 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -108,6 +115,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -167,6 +175,7 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -174,12 +183,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -207,7 +217,6 @@ CONFIG_CPU_HAS_DSP=y
 #
 CONFIG_SOLUTION_ENGINE=y
 CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_AP325RXA is not set
 
 #
 # Timer and clock configuration
@@ -215,7 +224,6 @@ CONFIG_SH_SOLUTION_ENGINE=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66666666
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -251,6 +259,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -279,11 +288,9 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -297,6 +304,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -341,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -359,7 +368,7 @@ CONFIG_NET_SCH_CBQ=y
 CONFIG_NET_SCH_HTB=y
 CONFIG_NET_SCH_HFSC=y
 CONFIG_NET_SCH_PRIO=y
-# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=y
 CONFIG_NET_SCH_SFQ=y
 CONFIG_NET_SCH_TEQL=y
@@ -395,12 +404,11 @@ CONFIG_NET_SCH_FIFO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -418,6 +426,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -504,6 +514,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -550,6 +561,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -558,7 +570,6 @@ CONFIG_ATA_SFF=y
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -593,9 +604,11 @@ CONFIG_SH_ETH=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -657,6 +670,7 @@ CONFIG_HW_RANDOM=m
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -668,8 +682,11 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -699,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -713,6 +726,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -734,7 +751,9 @@ CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -748,12 +767,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -782,6 +802,7 @@ CONFIG_FS_POSIX_ACL=y
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -813,6 +834,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -822,12 +844,12 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -877,13 +899,26 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -899,16 +934,19 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -947,6 +985,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -977,15 +1019,20 @@ CONFIG_CRYPTO_DES=y
 #
 CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index f3d4ca0..b52be140 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,24 +1,26 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc5
-# Fri Mar 21 12:05:31 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:12:06 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,30 +73,38 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -109,6 +119,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -136,6 +147,7 @@ CONFIG_CPU_SUBTYPE_SH7721=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -165,7 +177,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -173,11 +187,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -211,7 +227,6 @@ CONFIG_SH_7721_SOLUTION_ENGINE=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -247,6 +262,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -275,11 +291,9 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -293,6 +307,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -330,8 +345,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -339,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -357,7 +371,7 @@ CONFIG_NET_SCH_CBQ=y
 CONFIG_NET_SCH_HTB=y
 CONFIG_NET_SCH_HFSC=y
 CONFIG_NET_SCH_PRIO=y
-# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=y
 CONFIG_NET_SCH_SFQ=y
 CONFIG_NET_SCH_TEQL=y
@@ -393,12 +407,11 @@ CONFIG_NET_SCH_FIFO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -416,6 +429,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -426,6 +441,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -502,6 +518,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -546,13 +563,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -561,7 +580,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_VETH is not set
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -569,6 +587,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -591,7 +610,7 @@ CONFIG_NETDEV_10000=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -620,6 +639,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -636,6 +656,7 @@ CONFIG_INPUT_MOUSE=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -659,12 +680,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -680,13 +696,26 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -701,10 +730,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -715,9 +740,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -733,11 +785,16 @@ CONFIG_USB=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -750,6 +807,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -771,6 +830,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -778,7 +838,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -791,7 +850,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -806,6 +865,8 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -822,12 +883,12 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -841,14 +902,14 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
@@ -879,6 +940,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -910,6 +972,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -971,6 +1034,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -981,6 +1045,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -994,13 +1059,27 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1016,55 +1095,96 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
@@ -1073,6 +1193,7 @@ CONFIG_CRYPTO_HW=y
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index 8e6a6ba..e6df51f 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,53 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Wed Jun 20 18:08:04 2007
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:15:10 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -61,6 +64,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -69,32 +73,41 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -108,6 +121,8 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -117,8 +132,10 @@ CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -126,6 +143,8 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -134,14 +153,17 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 CONFIG_CPU_SUBTYPE_SH7722=y
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -151,6 +173,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 # CONFIG_X2TLB is not set
 CONFIG_VSYSCALL=y
 CONFIG_NUMA=y
@@ -161,14 +184,18 @@ CONFIG_MAX_ACTIVE_REGIONS=2
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -181,34 +208,38 @@ CONFIG_SPARSEMEM_STATIC=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU is not set
 # CONFIG_SH_FPU_EMU is not set
 CONFIG_SH_DSP=y
 CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_DSP=y
 
 #
 # Board support
 #
 CONFIG_SOLUTION_ENGINE=y
 CONFIG_SH_7722_SOLUTION_ENGINE=y
+# CONFIG_SH_MIGOR is not set
 
 #
 # Timer and clock configuration
@@ -219,6 +250,7 @@ CONFIG_SH_PCLK_FREQ=33333333
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -248,19 +280,21 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -271,21 +305,15 @@ CONFIG_CF_ENABLER=y
 CONFIG_CF_AREA6=y
 CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -298,6 +326,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -316,6 +345,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -323,8 +353,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -332,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -341,10 +370,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -352,18 +377,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -372,44 +398,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -417,6 +428,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -446,40 +458,41 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -488,22 +501,14 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -511,6 +516,7 @@ CONFIG_NETDEV_10000=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -520,7 +526,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -534,6 +539,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -554,6 +560,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -572,119 +579,106 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_DAB=y
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
+# Special HID drivers
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -701,38 +695,30 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -744,22 +730,20 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -783,12 +767,12 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -803,14 +787,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -818,42 +802,39 @@ CONFIG_RAMFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -864,11 +845,92 @@ CONFIG_SH_STANDARD_BIOS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -876,8 +938,10 @@ CONFIG_SH_STANDARD_BIOS=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index 167786f..a577099 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,48 +1,55 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc2
-# Thu Dec 28 23:15:49 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:17:29 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -54,33 +61,47 @@ CONFIG_KALLSYMS=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -94,68 +115,27 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 CONFIG_CPU_SUBTYPE_SH7750=y
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -164,58 +144,61 @@ CONFIG_CPU_SUBTYPE_SH7750=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -223,19 +206,28 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -250,12 +242,11 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
 
 #
 # Additional SuperH Device Drivers
 #
+CONFIG_HEARTBEAT=y
 # CONFIG_PUSH_SWITCH is not set
 
 #
@@ -266,11 +257,15 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -283,43 +278,32 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -342,6 +326,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -349,27 +334,14 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -379,10 +351,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -390,9 +358,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -404,32 +382,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -455,7 +428,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -478,75 +450,53 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -568,6 +518,7 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -575,96 +526,52 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 CONFIG_STNIC=y
 # CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -682,6 +589,7 @@ CONFIG_STNIC=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -704,15 +612,30 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -722,148 +645,92 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SH_WDT=y
 # CONFIG_SH_WDT_MMAP is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# Sonics Silicon Backplane
 #
-# CONFIG_TCG_TPM is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# I2C support
+# Multifunction device drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
+# Multimedia devices
 #
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Virtualization
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -887,12 +754,12 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -908,31 +775,33 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -940,7 +809,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -958,49 +826,126 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -1008,9 +953,14 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index a909559..d99a6bd 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,40 +1,54 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 12:10:12 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:21:12 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -47,33 +61,47 @@ CONFIG_KALLSYMS=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -87,60 +115,27 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-CONFIG_SH_7751_SOLUTION_ENGINE=y
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -149,65 +144,91 @@ CONFIG_CPU_SUBTYPE_SH7751=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7751_SOLUTION_ENGINE=y
+# CONFIG_SH_SH03 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -222,21 +243,30 @@ CONFIG_SH_PCLK_FREQ=60000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -250,43 +280,29 @@ CONFIG_CMDLINE="console=ttySC1,38400"
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_CF_ENABLER is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -308,52 +324,42 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 CONFIG_NETFILTER_DEBUG=y
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=y
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -363,10 +369,6 @@ CONFIG_IP_NF_QUEUE=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -374,9 +376,19 @@ CONFIG_IP_NF_QUEUE=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -388,32 +400,27 @@ CONFIG_IP_NF_QUEUE=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 # CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -439,7 +446,6 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -462,43 +468,29 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -506,89 +498,48 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -606,6 +557,7 @@ CONFIG_MII=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -620,150 +572,107 @@ CONFIG_MII=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SH_WDT is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# SPI support
+# Watchdog Device Drivers
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SH_WDT is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -772,17 +681,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -806,12 +715,12 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -824,26 +733,27 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -851,57 +761,146 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index 30f5ee4..ad95b80 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Thu Feb 28 10:18:04 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:27:30 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -41,11 +43,8 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -68,20 +67,27 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -90,6 +96,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -104,7 +111,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -115,6 +122,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -132,6 +140,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -152,7 +161,6 @@ CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
-# CONFIG_PMB is not set
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -161,9 +169,12 @@ CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -171,11 +182,14 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -210,7 +224,6 @@ CONFIG_SH_7780_SOLUTION_ENGINE=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
 CONFIG_SH_PCLK_FREQ=33333333
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -244,10 +257,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -273,11 +286,9 @@ CONFIG_PCI_LEGACY=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -347,11 +358,10 @@ CONFIG_IPV6=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -374,6 +384,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -461,11 +472,13 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -537,9 +550,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_NV is not set
@@ -547,11 +564,11 @@ CONFIG_ATA=y
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
@@ -575,6 +592,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -583,12 +601,11 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -621,12 +638,16 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -645,6 +666,7 @@ CONFIG_NET_PCI=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -654,6 +676,7 @@ CONFIG_NET_PCI=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -675,7 +698,7 @@ CONFIG_NET_PCI=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -709,9 +732,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -737,12 +762,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -757,6 +777,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -768,13 +789,26 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -786,15 +820,16 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -818,6 +853,7 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_ATY is not set
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -825,7 +861,10 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -850,24 +889,10 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -877,8 +902,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -892,11 +945,17 @@ CONFIG_USB=y
 #
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -911,6 +970,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -921,17 +982,25 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -943,6 +1012,10 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
@@ -956,17 +1029,19 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -975,9 +1050,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -1010,6 +1087,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1025,6 +1103,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1034,9 +1113,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -1099,12 +1177,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1115,45 +1201,86 @@ CONFIG_DEBUG_FS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_PCBC is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1163,6 +1290,7 @@ CONFIG_CRYPTO_HW=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 9fd5ea7..95f0f5d 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,41 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 12:13:26 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:31:54 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -48,34 +63,49 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -89,59 +119,27 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-CONFIG_SH_SH03=y
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -150,69 +148,90 @@ CONFIG_CPU_SUBTYPE_SH7751=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-CONFIG_CF_AREA5=y
-# CONFIG_CF_AREA6 is not set
-CONFIG_CF_BASE_ADDR=0xb4000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+CONFIG_SH_SH03=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -227,22 +246,31 @@ CONFIG_SH_PCLK_FREQ=60000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -256,20 +284,17 @@ CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
 #
 # Bus options
 #
+CONFIG_CF_ENABLER=y
+CONFIG_CF_AREA5=y
+# CONFIG_CF_AREA6 is not set
+CONFIG_CF_BASE_ADDR=0xb4000000
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_FAKE is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
@@ -279,30 +304,24 @@ CONFIG_HOTPLUG_PCI=m
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -323,33 +342,23 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -359,10 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -370,9 +375,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -381,34 +396,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -420,45 +416,76 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -479,6 +506,8 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -486,12 +515,9 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -501,7 +527,6 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -512,88 +537,67 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -601,18 +605,21 @@ CONFIG_NET_PCI=y
 # CONFIG_NE2K_PCI is not set
 CONFIG_8139CP=y
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -620,52 +627,46 @@ CONFIG_8139CP=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -673,6 +674,7 @@ CONFIG_8139CP=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -682,7 +684,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -692,6 +693,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -705,10 +707,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -731,15 +736,36 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -747,6 +773,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_SH_WDT=m
 # CONFIG_SH_WDT_MMAP is not set
 
@@ -755,142 +782,92 @@ CONFIG_SH_WDT=m
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# Sonics Silicon Backplane
 #
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# I2C support
-#
-# CONFIG_I2C is not set
-
+# Multifunction device drivers
 #
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
+# Special HID drivers
 #
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -904,20 +881,19 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -928,7 +904,6 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -948,12 +923,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -968,31 +943,30 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1000,7 +974,6 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1022,10 +995,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1066,81 +1036,146 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index 37e49a5..9a768b2 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc4
-# Thu Mar  6 16:02:29 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:35:18 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,30 +72,38 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -108,7 +118,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -118,6 +128,7 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -135,6 +146,7 @@ CONFIG_CPU_SUBTYPE_SH7710=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -164,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -172,11 +186,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -209,7 +225,6 @@ CONFIG_CPU_HAS_DSP=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=32768000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -245,10 +260,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -269,11 +284,9 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -311,10 +324,7 @@ CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -327,10 +337,12 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -339,6 +351,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -357,7 +370,7 @@ CONFIG_NET_SCH_CBQ=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -395,11 +408,10 @@ CONFIG_NET_SCH_FIFO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -417,6 +429,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -425,6 +439,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -500,6 +515,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -516,7 +532,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -528,14 +543,18 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
+# CONFIG_SH_ETH is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -543,6 +562,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -587,6 +607,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -611,12 +632,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -632,13 +648,26 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -653,20 +682,28 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -675,24 +712,23 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
@@ -720,6 +756,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -751,6 +788,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -780,12 +818,19 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -796,51 +841,91 @@ CONFIG_DEBUG_FS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
@@ -849,6 +934,7 @@ CONFIG_CRYPTO_HW=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index baf830c..6a77f69 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc2
-# Fri Aug  8 13:44:20 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:37:12 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,11 +13,12 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -76,7 +77,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -84,15 +87,12 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -124,6 +124,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -181,6 +182,7 @@ CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -193,13 +195,15 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -231,7 +235,6 @@ CONFIG_SH_SH7763RDP=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
 CONFIG_SH_PCLK_FREQ=66666666
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -291,6 +294,8 @@ CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -341,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -361,11 +367,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -563,6 +568,9 @@ CONFIG_SH_ETH=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -675,6 +683,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -700,6 +710,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -725,6 +736,7 @@ CONFIG_FB_BOTH_ENDIAN=y
 # CONFIG_FB_SH_MOBILE_LCDC is not set
 CONFIG_FB_SH7760=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -768,6 +780,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -788,6 +801,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -817,7 +831,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -830,7 +843,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -846,13 +859,14 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -860,7 +874,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MEMSTICK is not set
@@ -869,6 +883,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -880,12 +895,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -919,6 +935,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -955,6 +972,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1025,6 +1043,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1035,12 +1058,14 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1113,13 +1138,17 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index ff72697..07e33c2 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,27 +1,29 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Tue Jul 15 21:37:59 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:49:23 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -61,7 +63,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -78,7 +79,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -86,10 +89,13 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -106,6 +112,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -120,6 +127,7 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -181,10 +189,12 @@ CONFIG_MAX_ACTIVE_REGIONS=2
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -192,13 +202,15 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -266,9 +278,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -299,11 +312,9 @@ CONFIG_PCI_LEGACY=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -358,6 +369,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -378,12 +390,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -499,6 +511,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -541,6 +554,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -615,7 +629,6 @@ CONFIG_SATA_SIL=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -624,19 +637,18 @@ CONFIG_NETDEVICES=y
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -645,6 +657,8 @@ CONFIG_R8169=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -679,7 +693,7 @@ CONFIG_R8169=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -720,6 +734,7 @@ CONFIG_INPUT_KEYBOARD=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -754,44 +769,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -816,8 +852,12 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -844,6 +884,7 @@ CONFIG_MFD_SM501=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -877,6 +918,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -885,8 +927,11 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -911,10 +956,6 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 # CONFIG_LOGO_SUPERH_CLUT224 is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -925,9 +966,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -945,6 +1013,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -969,6 +1038,7 @@ CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -998,7 +1068,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1011,7 +1080,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1029,6 +1098,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1073,19 +1143,24 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1097,12 +1172,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1137,6 +1213,7 @@ CONFIG_NTFS_RW=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1158,6 +1235,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1168,18 +1246,18 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1250,6 +1328,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1270,13 +1350,27 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1292,15 +1386,19 @@ CONFIG_DEBUG_PREEMPT=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1339,6 +1437,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1369,15 +1471,20 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index 8800fef..e2b38a3 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,27 +1,34 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 12:52:49 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:52:59 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
@@ -29,11 +36,14 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -44,27 +54,38 @@ CONFIG_EMBEDDED=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-# CONFIG_SLAB is not set
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-CONFIG_SLOB=y
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -78,59 +99,27 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-CONFIG_SH_SHMIN=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 CONFIG_CPU_SUBTYPE_SH7706=y
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -139,65 +128,87 @@ CONFIG_CPU_SUBTYPE_SH7706=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_ADC is not set
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_SHMIN=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=32000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -212,69 +223,63 @@ CONFIG_SH_PCLK_FREQ=32000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00210000
-# CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -295,33 +300,23 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -331,10 +326,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -342,9 +333,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -356,32 +357,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 # CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -407,7 +403,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -433,41 +428,27 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -475,89 +456,48 @@ CONFIG_BLK_DEV_LOOP=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -575,6 +515,7 @@ CONFIG_NET_ETHERNET=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -593,153 +534,103 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -763,12 +654,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_SYSFS is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
@@ -780,29 +671,28 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -810,53 +700,140 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index a794c08..ae5cbe2 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,18 +1,23 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc7
-# Fri Sep 21 19:07:30 2007
+# Linux kernel version: 2.6.27
+# Tue Oct 21 12:16:25 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -26,7 +31,6 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 # General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
@@ -34,20 +38,41 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+# CONFIG_CPUSETS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MM_OWNER=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
@@ -59,44 +84,66 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -105,7 +152,10 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -114,6 +164,7 @@ CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -122,14 +173,17 @@ CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 CONFIG_CPU_SUBTYPE_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -139,45 +193,56 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
 CONFIG_VSYSCALL=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=3
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=6
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_4KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_64KB=y
+CONFIG_ENTRY_OFFSET=0x00010000
+# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_CACHE_WRITEBACK is not set
+CONFIG_CACHE_WRITEBACK=y
 # CONFIG_CACHE_WRITETHROUGH is not set
-CONFIG_CACHE_OFF=y
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -202,8 +267,9 @@ CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=50000000
 CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -214,7 +280,10 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
@@ -245,20 +314,23 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-# CONFIG_SMP is not set
+CONFIG_SECCOMP=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
 
@@ -266,21 +338,15 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
 # Bus options
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,6 +358,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -313,6 +380,7 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -334,8 +402,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +413,7 @@ CONFIG_IPV6_SIT=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -352,28 +423,28 @@ CONFIG_IPV6_SIT=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
 
 #
-# Wireless
+# CAN Device Drivers
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -384,6 +455,7 @@ CONFIG_IPV6_SIT=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -397,14 +469,18 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -443,25 +519,41 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -470,10 +562,19 @@ CONFIG_SMC91X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -495,6 +596,7 @@ CONFIG_SMC91X=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -514,6 +616,76 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -522,78 +694,158 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_SH_WDT is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# USB-based Watchdog Cards
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
 #
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
@@ -602,27 +854,78 @@ CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
-#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
-# DMA Devices
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
 #
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 CONFIG_UIO=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -634,22 +937,20 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -673,12 +974,12 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -693,14 +994,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -714,29 +1015,17 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -744,9 +1033,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -761,18 +1053,36 @@ CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_SH_KGDB is not set
 
 #
@@ -780,7 +1090,92 @@ CONFIG_DEBUG_STACK_USAGE=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -788,10 +1183,12 @@ CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index e4e5d21..b4ca511 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,36 +1,36 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Jul 26 11:49:11 2007
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:55:03 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
@@ -38,12 +38,15 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -57,6 +60,7 @@ CONFIG_KALLSYMS=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -65,10 +69,22 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -78,6 +94,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,13 +108,18 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -105,6 +127,8 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -113,14 +137,17 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -130,6 +157,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -139,7 +167,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -147,16 +177,21 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -164,20 +199,18 @@ CONFIG_NR_QUICK=2
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
 # Board support
 #
 # CONFIG_SH_7751_SYSTEMH is not set
 CONFIG_SH_SECUREEDGE5410=y
-# CONFIG_SH_HS7751RVOIP is not set
 # CONFIG_SH_RTS7751R2D is not set
 # CONFIG_SH_LANDISK is not set
 # CONFIG_SH_TITAN is not set
@@ -189,9 +222,9 @@ CONFIG_SH_SECUREEDGE5410=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -224,11 +257,15 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -241,26 +278,20 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_SH_CONCAT_FS=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -286,14 +317,13 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -301,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -310,10 +341,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -321,14 +348,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -352,6 +379,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -365,6 +393,7 @@ CONFIG_MTD_BLOCK_RO=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -401,6 +430,7 @@ CONFIG_MTD_RAM=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 CONFIG_MTD_PLATRAM=y
 
 #
@@ -437,10 +467,12 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -452,44 +484,52 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -501,12 +541,14 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -516,12 +558,12 @@ CONFIG_8139TOO_PIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -540,7 +582,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -564,7 +605,9 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -584,82 +627,77 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -668,18 +706,16 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -703,12 +739,12 @@ CONFIG_ROMFS_FS=y
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -724,14 +760,14 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -745,34 +781,30 @@ CONFIG_CRAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -782,6 +814,8 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -790,6 +824,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index af921b5a..1711f0f 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,36 +1,50 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 12:57:29 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:56:48 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -43,34 +57,48 @@ CONFIG_KALLSYMS=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -84,59 +112,27 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-CONFIG_SH_7751_SYSTEMH=y
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -145,65 +141,93 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_7751_SYSTEMH=y
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -218,21 +242,31 @@ CONFIG_SH_PCLK_FREQ=60000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -245,31 +279,15 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 # CONFIG_NET is not set
 
 #
@@ -282,40 +300,21 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -323,38 +322,10 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -376,6 +347,7 @@ CONFIG_SERIO=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -390,158 +362,115 @@ CONFIG_SERIO=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -565,12 +494,12 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -585,8 +514,11 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -595,49 +527,55 @@ CONFIG_CRAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index 0686ed6..ea3c5e8 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,41 +1,55 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc3
-# Mon Oct 30 18:04:49 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:58:12 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -49,34 +63,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -90,59 +118,27 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-CONFIG_SH_TITAN=y
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -151,65 +147,94 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08030000
 CONFIG_MEMORY_SIZE=0x7fd0000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+CONFIG_SH_TITAN=y
+# CONFIG_SH_LBOX_RE2 is not set
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=30000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -219,6 +244,7 @@ CONFIG_SH_PCLK_FREQ=30000000
 #
 # DMA support
 #
+CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
 CONFIG_NR_ONCHIP_DMA_CHANNELS=8
 # CONFIG_NR_DMA_CHANNELS_BOOL is not set
@@ -226,20 +252,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=8
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -257,17 +293,10 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 CONFIG_HOTPLUG_PCI=y
 # CONFIG_HOTPLUG_PCI_FAKE is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
@@ -277,30 +306,25 @@ CONFIG_HOTPLUG_PCI=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -308,13 +332,7 @@ CONFIG_ASK_IP_FIB_HASH=y
 # CONFIG_IP_FIB_TRIE is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_ROUTE_FWMARK is not set
 CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
-CONFIG_IP_ROUTE_MULTIPATH_RR=m
-CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
-CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
-CONFIG_IP_ROUTE_MULTIPATH_DRR=m
 # CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
@@ -336,19 +354,17 @@ CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_TCP_DIAG=m
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
 CONFIG_IPV6_PRIVACY=y
 # CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
@@ -360,11 +376,14 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=y
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 CONFIG_BRIDGE_NETFILTER=y
 
 #
@@ -373,134 +392,95 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_NETBIOS_NS=m
-CONFIG_IP_NF_TFTP=m
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-# CONFIG_IP_NF_SIP is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
 # CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=y
 CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=y
 # CONFIG_LLC2 is not set
@@ -510,14 +490,7 @@ CONFIG_LLC=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -526,6 +499,7 @@ CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -549,6 +523,7 @@ CONFIG_CLS_U32_PERF=y
 CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 CONFIG_NET_EMATCH_CMP=m
@@ -562,27 +537,37 @@ CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
 CONFIG_NET_ACT_IPT=m
+# CONFIG_NET_ACT_NAT is not set
 CONFIG_NET_ACT_PEDIT=m
 # CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
 CONFIG_IEEE80211_CRYPT_TKIP=y
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -591,20 +576,16 @@ CONFIG_FIB_RULES=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=m
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=0
@@ -615,6 +596,7 @@ CONFIG_MTD_DEBUG_VERBOSE=0
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
 # CONFIG_MTD_BLOCK_RO is not set
 CONFIG_FTL=m
@@ -623,6 +605,7 @@ CONFIG_NFTL=m
 CONFIG_INFTL=m
 CONFIG_RFD_FTL=m
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -644,16 +627,17 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -671,34 +655,23 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=m
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -711,20 +684,18 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -732,6 +703,8 @@ CONFIG_ATA_OVER_ETH=m
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -752,6 +725,8 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -759,12 +734,9 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -774,7 +746,6 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -785,6 +756,7 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -795,53 +767,31 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=m
 
 #
@@ -854,32 +804,35 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -891,18 +844,21 @@ CONFIG_8139TOO=y
 CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_8139TOO_8129 is not set
 CONFIG_8139_OLD_RX_RESET=y
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -910,63 +866,56 @@ CONFIG_8139_OLD_RX_RESET=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+# Wireless LAN
 #
-CONFIG_PRISM54=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_PIO=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
-# CONFIG_ZD1211RW is not set
-CONFIG_NET_WIRELESS=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -979,25 +928,17 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 # CONFIG_SLIP_MODE_SLIP6 is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -1005,6 +946,7 @@ CONFIG_SLIP_SMART=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -1014,7 +956,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -1024,6 +965,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -1037,10 +979,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -1059,15 +1004,36 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1075,6 +1041,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_SH_WDT=m
 # CONFIG_SH_WDT_MMAP is not set
 
@@ -1088,113 +1055,121 @@ CONFIG_SH_WDT=m
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 
 #
-# Ftape, the floppy tape device driver
+# Sonics Silicon Backplane
 #
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# I2C support
+# Multifunction device drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
-# SPI support
+# Multimedia devices
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# Multimedia core support
 #
-# CONFIG_W1 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Hardware Monitoring support
+# Multimedia drivers
 #
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_DAB is not set
 
 #
-# Multimedia devices
+# Graphics support
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Digital Video Broadcasting Devices
+# Display device support
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Graphics support
+# Console display driver support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Console display driver support
+# USB Input Devices
 #
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
-# Sound
+# USB HID Boot Protocol drivers
 #
-# CONFIG_SOUND is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
 
 #
-# USB support
+# Special HID drivers
 #
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1207,76 +1182,34 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_MON=y
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 CONFIG_USB_SERIAL_ARK3116=m
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
@@ -1291,6 +1224,7 @@ CONFIG_USB_SERIAL_ARK3116=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -1298,8 +1232,11 @@ CONFIG_USB_SERIAL_ARK3116=m
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1308,6 +1245,7 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
@@ -1315,10 +1253,11 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1329,80 +1268,53 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=m
 CONFIG_RTC_CLASS=m
 
 #
 # RTC interfaces
 #
-CONFIG_RTC_INTF_SYSFS=m
-CONFIG_RTC_INTF_PROC=m
-CONFIG_RTC_INTF_DEV=m
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SH=m
 # CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Engine support
+# SPI RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
 
 #
-# DMA Clients
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Devices
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_SH=m
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1412,31 +1324,25 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4DEV_FS=m
-# CONFIG_EXT4DEV_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -1447,7 +1353,6 @@ CONFIG_FUSE_FS=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1467,12 +1372,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
 
 #
@@ -1485,34 +1390,32 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1526,7 +1429,6 @@ CONFIG_CIFS_WEAK_PW_HASH=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-CONFIG_9P_FS=m
 
 #
 # Partition Types
@@ -1548,10 +1450,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1592,101 +1491,180 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_KGDB is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
@@ -1695,3 +1673,6 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c
index a13cb76..86c0b6f 100644
--- a/arch/sh/drivers/pci/ops-lboxre2.c
+++ b/arch/sh/drivers/pci/ops-lboxre2.c
@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/io.h>
-#include <asm/lboxre2.h>
+#include <mach/lboxre2.h>
 #include "pci-sh4.h"
 
 static char lboxre2_irq_tab[] __initdata = {
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
index 5fdadae..8555238 100644
--- a/arch/sh/drivers/pci/ops-r7780rp.c
+++ b/arch/sh/drivers/pci/ops-r7780rp.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
 #include <asm/io.h>
 #include "pci-sh4.h"
 
diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c
index b3fa3e2..d6ca74b 100644
--- a/arch/sh/drivers/pci/ops-rts7751r2d.c
+++ b/arch/sh/drivers/pci/ops-rts7751r2d.c
@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/io.h>
-#include <asm/rts7751r2d.h>
+#include <mach/r2d.h>
 #include "pci-sh4.h"
 
 static u8 rts7751r2d_irq_tab[] __initdata = {
diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c
index 66a9b40..4dcc641 100644
--- a/arch/sh/drivers/pci/ops-sdk7780.c
+++ b/arch/sh/drivers/pci/ops-sdk7780.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <asm/sdk7780.h>
+#include <mach/sdk7780.h>
 #include <asm/io.h>
 #include "pci-sh4.h"
 
diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c
index ac8ee23..a8f7801 100644
--- a/arch/sh/drivers/pci/ops-titan.c
+++ b/arch/sh/drivers/pci/ops-titan.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/io.h>
-#include <asm/titan.h>
+#include <mach/titan.h>
 #include "pci-sh4.h"
 
 static char titan_irq_tab[] __initdata = {
diff --git a/arch/sh/include/asm/bitops-llsc.h b/arch/sh/include/asm/bitops-llsc.h
new file mode 100644
index 0000000..43b8e1a
--- /dev/null
+++ b/arch/sh/include/asm/bitops-llsc.h
@@ -0,0 +1,144 @@
+#ifndef __ASM_SH_BITOPS_LLSC_H
+#define __ASM_SH_BITOPS_LLSC_H
+
+static inline void set_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! set_bit		\n\t"
+		"or		%3, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp), "=r" (a)
+		: "1" (a), "r" (mask)
+		: "t", "memory"
+	);
+}
+
+static inline void clear_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! clear_bit		\n\t"
+		"and		%3, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp), "=r" (a)
+		: "1" (a), "r" (~mask)
+		: "t", "memory"
+	);
+}
+
+static inline void change_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! change_bit		\n\t"
+		"xor		%3, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp), "=r" (a)
+		: "1" (a), "r" (mask)
+		: "t", "memory"
+	);
+}
+
+static inline int test_and_set_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! test_and_set_bit	\n\t"
+		"mov		%0, %2				\n\t"
+		"or		%4, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		"and		%4, %2				\n\t"
+		: "=&z" (tmp), "=r" (a), "=&r" (retval)
+		: "1" (a), "r" (mask)
+		: "t", "memory"
+	);
+
+	return retval != 0;
+}
+
+static inline int test_and_clear_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! test_and_clear_bit	\n\t"
+		"mov		%0, %2				\n\t"
+		"and		%5, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		"and		%4, %2				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=r" (a), "=&r" (retval)
+		: "1" (a), "r" (mask), "r" (~mask)
+		: "t", "memory"
+	);
+
+	return retval != 0;
+}
+
+static inline int test_and_change_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! test_and_change_bit	\n\t"
+		"mov		%0, %2				\n\t"
+		"xor		%4, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		"and		%4, %2				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=r" (a), "=&r" (retval)
+		: "1" (a), "r" (mask)
+		: "t", "memory"
+	);
+
+	return retval != 0;
+}
+
+#endif /* __ASM_SH_BITOPS_LLSC_H */
diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h
index d7d382f..367930d 100644
--- a/arch/sh/include/asm/bitops.h
+++ b/arch/sh/include/asm/bitops.h
@@ -13,6 +13,8 @@
 
 #ifdef CONFIG_GUSA_RB
 #include <asm/bitops-grb.h>
+#elif defined(CONFIG_CPU_SH4A)
+#include <asm/bitops-llsc.h>
 #else
 #include <asm/bitops-irq.h>
 #endif
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
index 720dfab..f9c8858 100644
--- a/arch/sh/include/asm/clock.h
+++ b/arch/sh/include/asm/clock.h
@@ -39,6 +39,7 @@ struct clk {
 
 /* Should be defined by processor-specific code */
 void arch_init_clk_ops(struct clk_ops **, int type);
+int __init arch_clk_init(void);
 
 /* arch/sh/kernel/cpu/clock.c */
 int clk_init(void);
diff --git a/arch/sh/include/asm/cmpxchg-llsc.h b/arch/sh/include/asm/cmpxchg-llsc.h
new file mode 100644
index 0000000..aee3bf2
--- /dev/null
+++ b/arch/sh/include/asm/cmpxchg-llsc.h
@@ -0,0 +1,71 @@
+#ifndef __ASM_SH_CMPXCHG_LLSC_H
+#define __ASM_SH_CMPXCHG_LLSC_H
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+	unsigned long retval;
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:					\n\t"
+		"movli.l	@%1, %0	! xchg_u32	\n\t"
+		"mov		%0, %2			\n\t"
+		"mov		%4, %0			\n\t"
+		"movco.l	%0, @%1			\n\t"
+		"bf		1b			\n\t"
+		"synco					\n\t"
+		: "=&z"(tmp), "=r" (m), "=&r" (retval)
+		: "1" (m), "r" (val)
+		: "t", "memory"
+	);
+
+	return retval;
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+	unsigned long retval;
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:					\n\t"
+		"movli.l	@%1, %0	! xchg_u8	\n\t"
+		"mov		%0, %2			\n\t"
+		"mov		%4, %0			\n\t"
+		"movco.l	%0, @%1			\n\t"
+		"bf		1b			\n\t"
+		"synco					\n\t"
+		: "=&z"(tmp), "=r" (m), "=&r" (retval)
+		: "1" (m), "r" (val & 0xff)
+		: "t", "memory"
+	);
+
+	return retval;
+}
+
+static inline unsigned long
+__cmpxchg_u32(volatile int *m, unsigned long old, unsigned long new)
+{
+	unsigned long retval;
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! __cmpxchg_u32		\n\t"
+		"mov		%0, %2				\n\t"
+		"cmp/eq		%2, %4				\n\t"
+		"bf		2f				\n\t"
+		"mov		%5, %0				\n\t"
+		"2:						\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=r" (m), "=&r" (retval)
+		: "1" (m), "r" (old), "r" (new)
+		: "t", "memory"
+	);
+
+	return retval;
+}
+
+#endif /* __ASM_SH_CMPXCHG_LLSC_H */
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
index f01449a..9eb9036 100644
--- a/arch/sh/include/asm/elf.h
+++ b/arch/sh/include/asm/elf.h
@@ -108,6 +108,14 @@ typedef struct user_fpu_struct elf_fpregset_t;
 #define elf_check_fdpic(x)		((x)->e_flags & EF_SH_FDPIC)
 #define elf_check_const_displacement(x)	((x)->e_flags & EF_SH_PIC)
 
+#ifdef CONFIG_SUPERH32
+/*
+ * Enable dump using regset.
+ * This covers all of general/DSP/FPU regs.
+ */
+#define CORE_DUMP_USE_REGSET
+#endif
+
 #define USE_ELF_CORE_DUMP
 #define ELF_FDPIC_CORE_EFLAGS	EF_SH_FDPIC
 #define ELF_EXEC_PAGESIZE	PAGE_SIZE
@@ -189,13 +197,7 @@ do {									\
 } while (0)
 #endif
 
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
-struct task_struct;
-extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
-extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
-
-#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
-#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
 
 #ifdef CONFIG_VSYSCALL
 /* vDSO has arch_setup_additional_pages */
diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h
index 91462fe..1d3aee0 100644
--- a/arch/sh/include/asm/fpu.h
+++ b/arch/sh/include/asm/fpu.h
@@ -30,8 +30,15 @@ static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
 }
 #endif
 
+struct user_regset;
+
 extern int do_fpu_inst(unsigned short, struct pt_regs *);
 
+extern int fpregs_get(struct task_struct *target,
+		      const struct user_regset *regset,
+		      unsigned int pos, unsigned int count,
+		      void *kbuf, void __user *ubuf);
+
 static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
 {
 	preempt_disable();
@@ -50,6 +57,18 @@ static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
 	preempt_enable();
 }
 
+static inline int init_fpu(struct task_struct *tsk)
+{
+	if (tsk_used_math(tsk)) {
+		if ((boot_cpu_data.flags & CPU_HAS_FPU) && tsk == current)
+			unlazy_fpu(tsk, task_pt_regs(tsk));
+		return 0;
+	}
+
+	set_stopped_child_used_math(tsk);
+	return 0;
+}
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __ASM_SH_FPU_H */
diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
new file mode 100644
index 0000000..3aed362
--- /dev/null
+++ b/arch/sh/include/asm/ftrace.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_FTRACE_H
+#define __ASM_SH_FTRACE_H
+
+#ifndef __ASSEMBLY__
+extern void mcount(void);
+#endif
+
+#endif /* __ASM_SH_FTRACE_H */
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
index cf32bd2..9067365 100644
--- a/arch/sh/include/asm/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -1,9 +1,9 @@
 /*
  *  include/asm-sh/gpio.h
  *
- *  Copyright (C) 2007 Markus Brunner, Mark Jonas
+ * Generic GPIO API and pinmux table support for SuperH.
  *
- *  Addresses for the Pin Function Controller
+ * Copyright (c) 2008 Magnus Damm
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,8 +12,111 @@
 #ifndef __ASM_SH_GPIO_H
 #define __ASM_SH_GPIO_H
 
+#include <linux/kernel.h>
+#include <linux/errno.h>
+
 #if defined(CONFIG_CPU_SH3)
 #include <cpu/gpio.h>
 #endif
 
+typedef unsigned short pinmux_enum_t;
+typedef unsigned char pinmux_flag_t;
+
+#define PINMUX_TYPE_NONE            0
+#define PINMUX_TYPE_FUNCTION        1
+#define PINMUX_TYPE_GPIO            2
+#define PINMUX_TYPE_OUTPUT          3
+#define PINMUX_TYPE_INPUT           4
+#define PINMUX_TYPE_INPUT_PULLUP    5
+#define PINMUX_TYPE_INPUT_PULLDOWN  6
+
+#define PINMUX_FLAG_TYPE            (0x7)
+#define PINMUX_FLAG_WANT_PULLUP     (1 << 3)
+#define PINMUX_FLAG_WANT_PULLDOWN   (1 << 4)
+
+struct pinmux_gpio {
+	pinmux_enum_t enum_id;
+	pinmux_flag_t flags;
+};
+
+#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark }
+#define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0
+
+struct pinmux_cfg_reg {
+	unsigned long reg, reg_width, field_width;
+	unsigned long *cnt;
+	pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_CFG_REG(name, r, r_width, f_width) \
+	.reg = r, .reg_width = r_width, .field_width = f_width,		\
+	.cnt = (unsigned long [r_width / f_width]) {}, \
+	.enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \
+
+struct pinmux_data_reg {
+	unsigned long reg, reg_width;
+	pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_DATA_REG(name, r, r_width) \
+	.reg = r, .reg_width = r_width,	\
+	.enum_ids = (pinmux_enum_t [r_width]) \
+
+struct pinmux_range {
+	pinmux_enum_t begin;
+	pinmux_enum_t end;
+	pinmux_enum_t force;
+};
+
+struct pinmux_info {
+	char *name;
+	pinmux_enum_t reserved_id;
+	struct pinmux_range data;
+	struct pinmux_range input;
+	struct pinmux_range input_pd;
+	struct pinmux_range input_pu;
+	struct pinmux_range output;
+	struct pinmux_range mark;
+	struct pinmux_range function;
+
+	unsigned first_gpio, last_gpio;
+
+	struct pinmux_gpio *gpios;
+	struct pinmux_cfg_reg *cfg_regs;
+	struct pinmux_data_reg *data_regs;
+
+	pinmux_enum_t *gpio_data;
+	unsigned int gpio_data_size;
+
+	unsigned long *gpio_in_use;
+};
+
+int register_pinmux(struct pinmux_info *pip);
+
+int __gpio_request(unsigned gpio);
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return __gpio_request(gpio);
+}
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+
+/* IRQ modes are unspported */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+#include <asm-generic/gpio.h>
+
 #endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h
index d557b00..603cdde 100644
--- a/arch/sh/include/asm/hw_irq.h
+++ b/arch/sh/include/asm/hw_irq.h
@@ -2,6 +2,7 @@
 #define __ASM_SH_HW_IRQ_H
 
 #include <linux/init.h>
+#include <linux/sh_intc.h>
 #include <asm/atomic.h>
 
 extern atomic_t irq_err_count;
@@ -23,101 +24,12 @@ struct ipr_desc {
 
 void register_ipr_controller(struct ipr_desc *);
 
-typedef unsigned char intc_enum;
-
-struct intc_vect {
-	intc_enum enum_id;
-	unsigned short vect;
-};
-
-#define INTC_VECT(enum_id, vect) { enum_id, vect }
-#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
-
-struct intc_group {
-	intc_enum enum_id;
-	intc_enum enum_ids[32];
-};
-
-#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
-
-struct intc_mask_reg {
-	unsigned long set_reg, clr_reg, reg_width;
-	intc_enum enum_ids[32];
-#ifdef CONFIG_SMP
-	unsigned long smp;
-#endif
-};
-
-struct intc_prio_reg {
-	unsigned long set_reg, clr_reg, reg_width, field_width;
-	intc_enum enum_ids[16];
-#ifdef CONFIG_SMP
-	unsigned long smp;
-#endif
-};
-
-struct intc_sense_reg {
-	unsigned long reg, reg_width, field_width;
-	intc_enum enum_ids[16];
-};
-
-#ifdef CONFIG_SMP
-#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8)
-#else
-#define INTC_SMP(stride, nr)
-#endif
-
-struct intc_desc {
-	struct intc_vect *vectors;
-	unsigned int nr_vectors;
-	struct intc_group *groups;
-	unsigned int nr_groups;
-	struct intc_mask_reg *mask_regs;
-	unsigned int nr_mask_regs;
-	struct intc_prio_reg *prio_regs;
-	unsigned int nr_prio_regs;
-	struct intc_sense_reg *sense_regs;
-	unsigned int nr_sense_regs;
-	char *name;
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
-	struct intc_mask_reg *ack_regs;
-	unsigned int nr_ack_regs;
-#endif
-};
-
-#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
-#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups,		\
-	mask_regs, prio_regs, sense_regs)				\
-struct intc_desc symbol __initdata = {					\
-	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
-	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
-	_INTC_ARRAY(sense_regs),					\
-	chipname,							\
-}
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
-#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
-	mask_regs, prio_regs, sense_regs, ack_regs)			\
-struct intc_desc symbol __initdata = {					\
-	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
-	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
-	_INTC_ARRAY(sense_regs),					\
-	chipname,							\
-	_INTC_ARRAY(ack_regs),						\
-}
-#endif
-
-void __init register_intc_controller(struct intc_desc *desc);
-int intc_set_priority(unsigned int irq, unsigned int prio);
-
 void __init plat_irq_setup(void);
-#ifdef CONFIG_CPU_SH3
 void __init plat_irq_setup_sh3(void);
-#endif
+void __init plat_irq_setup_pins(int mode);
 
 enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
        IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
        IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
-void __init plat_irq_setup_pins(int mode);
 
 #endif /* __ASM_SH_HW_IRQ_H */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index a4fbf0c..436c285 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -1,27 +1,26 @@
 #ifndef __ASM_SH_IO_H
 #define __ASM_SH_IO_H
-
 /*
  * Convention:
- *    read{b,w,l}/write{b,w,l} are for PCI,
+ *    read{b,w,l,q}/write{b,w,l,q} are for PCI,
  *    while in{b,w,l}/out{b,w,l} are for ISA
- * These may (will) be platform specific function.
+ *
  * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
  * and 'string' versions: ins{b,w,l}/outs{b,w,l}
- * For read{b,w,l} and write{b,w,l} there are also __raw versions, which
- * do not have a memory barrier after them.
  *
- * In addition, we have
- *   ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O.
- *   which are processor specific.
- */
-
-/*
- * We follow the Alpha convention here:
- *  __inb expands to an inline function call (which calls via the mv)
- *  _inb  is a real function call (note ___raw fns are _ version of __raw)
- *  inb   by default expands to _inb, but the machine specific code may
- *        define it to __inb if it chooses.
+ * While read{b,w,l,q} and write{b,w,l,q} contain memory barriers
+ * automatically, there are also __raw versions, which do not.
+ *
+ * Historically, we have also had ctrl_in{b,w,l,q}/ctrl_out{b,w,l,q} for
+ * SuperH specific I/O (raw I/O to on-chip CPU peripherals). In practice
+ * these have the same semantics as the __raw variants, and as such, all
+ * new code should be using the __raw versions.
+ *
+ * All ISA I/O routines are wrapped through the machine vector. If a
+ * board does not provide overrides, a generic set that are copied in
+ * from the default machine vector are used instead. These are largely
+ * for old compat code for I/O offseting to SuperIOs, all of which are
+ * better handled through the machvec ioport mapping routines these days.
  */
 #include <asm/cache.h>
 #include <asm/system.h>
@@ -31,7 +30,6 @@
 #include <asm-generic/iomap.h>
 
 #ifdef __KERNEL__
-
 /*
  * Depending on which platform we are running on, we need different
  * I/O functions.
@@ -40,105 +38,68 @@
 #include <asm/io_generic.h>
 #include <asm/io_trapped.h>
 
-#define maybebadio(port) \
-  printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
-	 __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0))
-
-/*
- * Since boards are able to define their own set of I/O routines through
- * their respective machine vector, we always wrap through the mv.
- *
- * Also, in the event that a board hasn't provided its own definition for
- * a given routine, it will be wrapped to generic code at run-time.
- */
+#define inb(p)			sh_mv.mv_inb((p))
+#define inw(p)			sh_mv.mv_inw((p))
+#define inl(p)			sh_mv.mv_inl((p))
+#define outb(x,p)		sh_mv.mv_outb((x),(p))
+#define outw(x,p)		sh_mv.mv_outw((x),(p))
+#define outl(x,p)		sh_mv.mv_outl((x),(p))
+
+#define inb_p(p)		sh_mv.mv_inb_p((p))
+#define inw_p(p)		sh_mv.mv_inw_p((p))
+#define inl_p(p)		sh_mv.mv_inl_p((p))
+#define outb_p(x,p)		sh_mv.mv_outb_p((x),(p))
+#define outw_p(x,p)		sh_mv.mv_outw_p((x),(p))
+#define outl_p(x,p)		sh_mv.mv_outl_p((x),(p))
+
+#define insb(p,b,c)		sh_mv.mv_insb((p), (b), (c))
+#define insw(p,b,c)		sh_mv.mv_insw((p), (b), (c))
+#define insl(p,b,c)		sh_mv.mv_insl((p), (b), (c))
+#define outsb(p,b,c)		sh_mv.mv_outsb((p), (b), (c))
+#define outsw(p,b,c)		sh_mv.mv_outsw((p), (b), (c))
+#define outsl(p,b,c)		sh_mv.mv_outsl((p), (b), (c))
+
+#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile u8  __force *)(a) = (v))
+#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
+#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
+#define __raw_writeq(v,a)	(__chk_io_ptr(a), *(volatile u64 __force *)(a) = (v))
+
+#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile u8  __force *)(a))
+#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile u16 __force *)(a))
+#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile u32 __force *)(a))
+#define __raw_readq(a)		(__chk_io_ptr(a), *(volatile u64 __force *)(a))
+
+#define readb(a)		({ u8  r_ = __raw_readb(a); mb(); r_; })
+#define readw(a)		({ u16 r_ = __raw_readw(a); mb(); r_; })
+#define readl(a)		({ u32 r_ = __raw_readl(a); mb(); r_; })
+#define readq(a)		({ u64 r_ = __raw_readq(a); mb(); r_; })
+
+#define writeb(v,a)		({ __raw_writeb((v),(a)); mb(); })
+#define writew(v,a)		({ __raw_writew((v),(a)); mb(); })
+#define writel(v,a)		({ __raw_writel((v),(a)); mb(); })
+#define writeq(v,a)		({ __raw_writeq((v),(a)); mb(); })
 
-#define __inb(p)	sh_mv.mv_inb((p))
-#define __inw(p)	sh_mv.mv_inw((p))
-#define __inl(p)	sh_mv.mv_inl((p))
-#define __outb(x,p)	sh_mv.mv_outb((x),(p))
-#define __outw(x,p)	sh_mv.mv_outw((x),(p))
-#define __outl(x,p)	sh_mv.mv_outl((x),(p))
-
-#define __inb_p(p)	sh_mv.mv_inb_p((p))
-#define __inw_p(p)	sh_mv.mv_inw_p((p))
-#define __inl_p(p)	sh_mv.mv_inl_p((p))
-#define __outb_p(x,p)	sh_mv.mv_outb_p((x),(p))
-#define __outw_p(x,p)	sh_mv.mv_outw_p((x),(p))
-#define __outl_p(x,p)	sh_mv.mv_outl_p((x),(p))
-
-#define __insb(p,b,c)	sh_mv.mv_insb((p), (b), (c))
-#define __insw(p,b,c)	sh_mv.mv_insw((p), (b), (c))
-#define __insl(p,b,c)	sh_mv.mv_insl((p), (b), (c))
-#define __outsb(p,b,c)	sh_mv.mv_outsb((p), (b), (c))
-#define __outsw(p,b,c)	sh_mv.mv_outsw((p), (b), (c))
-#define __outsl(p,b,c)	sh_mv.mv_outsl((p), (b), (c))
-
-#define __readb(a)	sh_mv.mv_readb((a))
-#define __readw(a)	sh_mv.mv_readw((a))
-#define __readl(a)	sh_mv.mv_readl((a))
-#define __writeb(v,a)	sh_mv.mv_writeb((v),(a))
-#define __writew(v,a)	sh_mv.mv_writew((v),(a))
-#define __writel(v,a)	sh_mv.mv_writel((v),(a))
-
-#define inb		__inb
-#define inw		__inw
-#define inl		__inl
-#define outb		__outb
-#define outw		__outw
-#define outl		__outl
-
-#define inb_p		__inb_p
-#define inw_p		__inw_p
-#define inl_p		__inl_p
-#define outb_p		__outb_p
-#define outw_p		__outw_p
-#define outl_p		__outl_p
-
-#define insb		__insb
-#define insw		__insw
-#define insl		__insl
-#define outsb		__outsb
-#define outsw		__outsw
-#define outsl		__outsl
-
-#define __raw_readb(a)		__readb((void __iomem *)(a))
-#define __raw_readw(a)		__readw((void __iomem *)(a))
-#define __raw_readl(a)		__readl((void __iomem *)(a))
-#define __raw_writeb(v, a)	__writeb(v, (void __iomem *)(a))
-#define __raw_writew(v, a)	__writew(v, (void __iomem *)(a))
-#define __raw_writel(v, a)	__writel(v, (void __iomem *)(a))
-
-void __raw_writesl(unsigned long addr, const void *data, int longlen);
-void __raw_readsl(unsigned long addr, void *data, int longlen);
+/* SuperH on-chip I/O functions */
+#define ctrl_inb		__raw_readb
+#define ctrl_inw		__raw_readw
+#define ctrl_inl		__raw_readl
+#define ctrl_inq		__raw_readq
 
-/*
- * The platform header files may define some of these macros to use
- * the inlined versions where appropriate.  These macros may also be
- * redefined by userlevel programs.
- */
-#ifdef __readb
-# define readb(a)	({ unsigned int r_ = __raw_readb(a); mb(); r_; })
-#endif
-#ifdef __raw_readw
-# define readw(a)	({ unsigned int r_ = __raw_readw(a); mb(); r_; })
-#endif
-#ifdef __raw_readl
-# define readl(a)	({ unsigned int r_ = __raw_readl(a); mb(); r_; })
-#endif
+#define ctrl_outb		__raw_writeb
+#define ctrl_outw		__raw_writew
+#define ctrl_outl		__raw_writel
+#define ctrl_outq		__raw_writeq
 
-#ifdef __raw_writeb
-# define writeb(v,a)	({ __raw_writeb((v),(a)); mb(); })
-#endif
-#ifdef __raw_writew
-# define writew(v,a)	({ __raw_writew((v),(a)); mb(); })
-#endif
-#ifdef __raw_writel
-# define writel(v,a)	({ __raw_writel((v),(a)); mb(); })
+static inline void ctrl_delay(void)
+{
+#ifdef P2SEG
+	__raw_readw(P2SEG);
 #endif
+}
 
 #define __BUILD_MEMORY_STRING(bwlq, type)				\
 									\
-static inline void writes##bwlq(volatile void __iomem *mem,		\
+static inline void __raw_writes##bwlq(volatile void __iomem *mem,	\
 				const void *addr, unsigned int count)	\
 {									\
 	const volatile type *__addr = addr;				\
@@ -149,8 +110,8 @@ static inline void writes##bwlq(volatile void __iomem *mem,		\
 	}								\
 }									\
 									\
-static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
-			       unsigned int count)			\
+static inline void __raw_reads##bwlq(volatile void __iomem *mem,	\
+			       void *addr, unsigned int count)		\
 {									\
 	volatile type *__addr = addr;					\
 									\
@@ -162,106 +123,71 @@ static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
 
 __BUILD_MEMORY_STRING(b, u8)
 __BUILD_MEMORY_STRING(w, u16)
-#define writesl __raw_writesl
-#define readsl  __raw_readsl
+__BUILD_MEMORY_STRING(q, u64)
+
+void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+
+#define writesb			__raw_writesb
+#define writesw			__raw_writesw
+#define writesl			__raw_writesl
+
+#define readsb			__raw_readsb
+#define readsw			__raw_readsw
+#define readsl			__raw_readsl
 
-#define readb_relaxed(a) readb(a)
-#define readw_relaxed(a) readw(a)
-#define readl_relaxed(a) readl(a)
+#define readb_relaxed(a)	readb(a)
+#define readw_relaxed(a)	readw(a)
+#define readl_relaxed(a)	readl(a)
+#define readq_relaxed(a)	readq(a)
 
 /* Simple MMIO */
-#define ioread8(a)		readb(a)
-#define ioread16(a)		readw(a)
+#define ioread8(a)		__raw_readb(a)
+#define ioread16(a)		__raw_readw(a)
 #define ioread16be(a)		be16_to_cpu(__raw_readw((a)))
-#define ioread32(a)		readl(a)
+#define ioread32(a)		__raw_readl(a)
 #define ioread32be(a)		be32_to_cpu(__raw_readl((a)))
 
-#define iowrite8(v,a)		writeb((v),(a))
-#define iowrite16(v,a)		writew((v),(a))
+#define iowrite8(v,a)		__raw_writeb((v),(a))
+#define iowrite16(v,a)		__raw_writew((v),(a))
 #define iowrite16be(v,a)	__raw_writew(cpu_to_be16((v)),(a))
-#define iowrite32(v,a)		writel((v),(a))
+#define iowrite32(v,a)		__raw_writel((v),(a))
 #define iowrite32be(v,a)	__raw_writel(cpu_to_be32((v)),(a))
 
-#define ioread8_rep(a, d, c)	readsb((a), (d), (c))
-#define ioread16_rep(a, d, c)	readsw((a), (d), (c))
-#define ioread32_rep(a, d, c)	readsl((a), (d), (c))
+#define ioread8_rep(a, d, c)	__raw_readsb((a), (d), (c))
+#define ioread16_rep(a, d, c)	__raw_readsw((a), (d), (c))
+#define ioread32_rep(a, d, c)	__raw_readsl((a), (d), (c))
 
-#define iowrite8_rep(a, s, c)	writesb((a), (s), (c))
-#define iowrite16_rep(a, s, c)	writesw((a), (s), (c))
-#define iowrite32_rep(a, s, c)	writesl((a), (s), (c))
+#define iowrite8_rep(a, s, c)	__raw_writesb((a), (s), (c))
+#define iowrite16_rep(a, s, c)	__raw_writesw((a), (s), (c))
+#define iowrite32_rep(a, s, c)	__raw_writesl((a), (s), (c))
 
-#define mmiowb()	wmb()	/* synco on SH-4A, otherwise a nop */
+/* synco on SH-4A, otherwise a nop */
+#define mmiowb()		wmb()
 
 #define IO_SPACE_LIMIT 0xffffffff
 
+extern unsigned long generic_io_base;
+
 /*
- * This function provides a method for the generic case where a board-specific
- * ioport_map simply needs to return the port + some arbitrary port base.
+ * This function provides a method for the generic case where a
+ * board-specific ioport_map simply needs to return the port + some
+ * arbitrary port base.
  *
  * We use this at board setup time to implicitly set the port base, and
  * as a result, we can use the generic ioport_map.
  */
 static inline void __set_io_port_base(unsigned long pbase)
 {
-	extern unsigned long generic_io_base;
-
 	generic_io_base = pbase;
 }
 
 #define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
 
 /* We really want to try and get these to memcpy etc */
-extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long);
-extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
-extern void memset_io(volatile void __iomem *, int, unsigned long);
-
-/* SuperH on-chip I/O functions */
-static inline unsigned char ctrl_inb(unsigned long addr)
-{
-	return *(volatile unsigned char*)addr;
-}
-
-static inline unsigned short ctrl_inw(unsigned long addr)
-{
-	return *(volatile unsigned short*)addr;
-}
-
-static inline unsigned int ctrl_inl(unsigned long addr)
-{
-	return *(volatile unsigned long*)addr;
-}
-
-static inline unsigned long long ctrl_inq(unsigned long addr)
-{
-	return *(volatile unsigned long long*)addr;
-}
-
-static inline void ctrl_outb(unsigned char b, unsigned long addr)
-{
-	*(volatile unsigned char*)addr = b;
-}
-
-static inline void ctrl_outw(unsigned short b, unsigned long addr)
-{
-	*(volatile unsigned short*)addr = b;
-}
-
-static inline void ctrl_outl(unsigned int b, unsigned long addr)
-{
-        *(volatile unsigned long*)addr = b;
-}
-
-static inline void ctrl_outq(unsigned long long b, unsigned long addr)
-{
-	*(volatile unsigned long long*)addr = b;
-}
-
-static inline void ctrl_delay(void)
-{
-#ifdef P2SEG
-	ctrl_inw(P2SEG);
-#endif
-}
+void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
+void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
+void memset_io(volatile void __iomem *, int, unsigned long);
 
 /* Quad-word real-mode I/O, don't ask.. */
 unsigned long long peek_real_address_q(unsigned long long addr);
@@ -347,9 +273,15 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 	__ioremap_mode((offset), (size), _PAGE_CACHABLE)
 #define p3_ioremap(offset, size, flags)			\
 	__ioremap((offset), (size), (flags))
+#define ioremap_prot(offset, size, flags)		\
+	__ioremap_mode((offset), (size), (flags))
 #define iounmap(addr)					\
 	__iounmap((addr))
 
+#define maybebadio(port) \
+	printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
+	       __func__, __LINE__, (port), (u32)__builtin_return_address(0))
+
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  * access
diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h
index 92fc607..1e5d375 100644
--- a/arch/sh/include/asm/io_generic.h
+++ b/arch/sh/include/asm/io_generic.h
@@ -33,13 +33,6 @@ void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long
 void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count);
 void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count);
 
-u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *);
-u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *);
-u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *);
-void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *);
-void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *);
-void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *);
-
 void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size);
 void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr);
 
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
index 6195a53..d319baa 100644
--- a/arch/sh/include/asm/irq.h
+++ b/arch/sh/include/asm/irq.h
@@ -41,6 +41,9 @@ static inline int generic_irq_demux(int irq)
 #define irq_canonicalize(irq)	(irq)
 #define irq_demux(irq)		sh_mv.mv_irq_demux(irq)
 
+void init_IRQ(void);
+asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs);
+
 #ifdef CONFIG_IRQSTACKS
 extern void irq_ctx_init(int cpu);
 extern void irq_ctx_exit(int cpu);
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
index 49cd690..0b9f896 100644
--- a/arch/sh/include/asm/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
@@ -4,6 +4,7 @@
 /* Grossly misnamed. */
 enum die_val {
 	DIE_TRAP,
+	DIE_OOPS,
 };
 
 #endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h
new file mode 100644
index 0000000..6078d8e
--- /dev/null
+++ b/arch/sh/include/asm/kprobes.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_SH_KPROBES_H
+#define __ASM_SH_KPROBES_H
+
+#ifdef CONFIG_KPROBES
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+typedef u16 kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0xc33a
+
+#define MAX_INSN_SIZE 16
+#define MAX_STACK_SIZE 64
+#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
+	(((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \
+	? (MAX_STACK_SIZE) \
+	: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
+
+#define regs_return_value(regs)		((regs)->regs[0])
+#define flush_insn_slot(p)		do { } while (0)
+#define kretprobe_blacklist_size	0
+
+struct kprobe;
+
+void arch_remove_kprobe(struct kprobe *);
+void kretprobe_trampoline(void);
+void jprobe_return_end(void);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long jprobe_saved_r15;
+	struct pt_regs jprobe_saved_regs;
+	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+extern int kprobe_handle_illslot(unsigned long pc);
+#else
+
+#define kprobe_handle_illslot(pc)	(-1)
+
+#endif /* CONFIG_KPROBES */
+#endif /* __ASM_SH_KPROBES_H */
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index b2e4124..f1bae02 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -42,13 +42,6 @@ struct sh_machine_vector {
 	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
 	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
 
-	u8 (*mv_readb)(void __iomem *);
-	u16 (*mv_readw)(void __iomem *);
-	u32 (*mv_readl)(void __iomem *);
-	void (*mv_writeb)(u8, void __iomem *);
-	void (*mv_writew)(u16, void __iomem *);
-	void (*mv_writel)(u32, void __iomem *);
-
 	int (*mv_irq_demux)(int irq);
 
 	void (*mv_init_irq)(void);
diff --git a/arch/sh/include/asm/migor.h b/arch/sh/include/asm/migor.h
deleted file mode 100644
index c12b632..0000000
--- a/arch/sh/include/asm/migor.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef __ASM_SH_MIGOR_H
-#define __ASM_SH_MIGOR_H
-
-/*
- * linux/include/asm-sh/migor.h
- *
- * Copyright (C) 2008 Renesas Solutions
- *
- * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <asm/addrspace.h>
-
-/* GPIO */
-#define PORT_PACR 0xa4050100
-#define PORT_PDCR 0xa4050106
-#define PORT_PECR 0xa4050108
-#define PORT_PHCR 0xa405010e
-#define PORT_PJCR 0xa4050110
-#define PORT_PKCR 0xa4050112
-#define PORT_PLCR 0xa4050114
-#define PORT_PMCR 0xa4050116
-#define PORT_PRCR 0xa405011c
-#define PORT_PTCR 0xa4050140
-#define PORT_PUCR 0xa4050142
-#define PORT_PVCR 0xa4050144
-#define PORT_PWCR 0xa4050146
-#define PORT_PXCR 0xa4050148
-#define PORT_PYCR 0xa405014a
-#define PORT_PZCR 0xa405014c
-#define PORT_PADR 0xa4050120
-#define PORT_PHDR 0xa405012e
-#define PORT_PTDR 0xa4050160
-#define PORT_PWDR 0xa4050166
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRC 0xa405015c
-
-#define PORT_MSELCRB 0xa4050182
-
-#define PORT_PSELA 0xa405014e
-#define PORT_PSELB 0xa4050150
-#define PORT_PSELC 0xa4050152
-#define PORT_PSELD 0xa4050154
-#define PORT_PSELE 0xa4050156
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRB 0xa405015a
-#define PORT_HIZCRC 0xa405015c
-
-#define BSC_CS6ABCR 0xfec1001c
-
-#include <asm/sh_mobile_lcdc.h>
-
-int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
-			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-
-#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h
index 2969253..7f5363b 100644
--- a/arch/sh/include/asm/mmzone.h
+++ b/arch/sh/include/asm/mmzone.h
@@ -4,6 +4,8 @@
 #ifdef __KERNEL__
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
+#include <linux/numa.h>
+
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)		(node_data[nid])
 
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 77fb8bf..5871d78 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -104,6 +104,8 @@ typedef struct { unsigned long pgd; } pgd_t;
 
 typedef struct page *pgtable_t;
 
+#define pte_pgprot(x) __pgprot(pte_val(x) & PTE_FLAGS_MASK)
+
 #endif /* !__ASSEMBLY__ */
 
 /*
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index a4a8f8b..52220d7 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -76,6 +76,7 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #endif
 
 #define PTE_PHYS_MASK		(PHYS_ADDR_MASK & PAGE_MASK)
+#define PTE_FLAGS_MASK		(~(PTE_PHYS_MASK) << PAGE_SHIFT)
 
 #ifdef CONFIG_SUPERH32
 #define VMALLOC_START	(P3SEG)
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 15d9f92..693364a 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -3,6 +3,7 @@
 
 #include <asm/cpu-features.h>
 #include <asm/segment.h>
+#include <asm/cache.h>
 
 #ifndef __ASSEMBLY__
 /*
@@ -43,11 +44,52 @@ enum cpu_type {
 	CPU_SH_NONE
 };
 
+/*
+ * TLB information structure
+ *
+ * Defined for both I and D tlb, per-processor.
+ */
+struct tlb_info {
+	unsigned long long next;
+	unsigned long long first;
+	unsigned long long last;
+
+	unsigned int entries;
+	unsigned int step;
+
+	unsigned long flags;
+};
+
+struct sh_cpuinfo {
+	unsigned int type;
+	int cut_major, cut_minor;
+	unsigned long loops_per_jiffy;
+	unsigned long asid_cache;
+
+	struct cache_info icache;	/* Primary I-cache */
+	struct cache_info dcache;	/* Primary D-cache */
+	struct cache_info scache;	/* Secondary cache */
+
+	/* TLB info */
+	struct tlb_info itlb;
+	struct tlb_info dtlb;
+
+	unsigned long flags;
+} __attribute__ ((aligned(L1_CACHE_BYTES)));
+
+extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
 /* Forward decl */
-struct sh_cpuinfo;
+struct seq_operations;
+
+extern struct pt_regs fake_swapper_regs;
 
 /* arch/sh/kernel/setup.c */
 const char *get_cpu_subtype(struct sh_cpuinfo *c);
+extern const struct seq_operations cpuinfo_op;
 
 #ifdef CONFIG_VSYSCALL
 int vsyscall_init(void);
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 0dadd75..a46a020 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -10,9 +10,9 @@
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
+#include <linux/linkage.h>
 #include <asm/page.h>
 #include <asm/types.h>
-#include <asm/cache.h>
 #include <asm/ptrace.h>
 
 /*
@@ -26,23 +26,7 @@
 #define CCN_CVR		0xff000040
 #define CCN_PRR		0xff000044
 
-struct sh_cpuinfo {
-	unsigned int type;
-	int cut_major, cut_minor;
-	unsigned long loops_per_jiffy;
-	unsigned long asid_cache;
-
-	struct cache_info icache;	/* Primary I-cache */
-	struct cache_info dcache;	/* Primary D-cache */
-	struct cache_info scache;	/* Secondary cache */
-
-	unsigned long flags;
-} __attribute__ ((aligned(L1_CACHE_BYTES)));
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+asmlinkage void __init sh_cpu_init(void);
 
 /*
  * User space process size: 2GB.
@@ -196,6 +180,8 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
 #define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
 
+#define user_stack_pointer(regs)	((regs)->regs[15])
+
 #define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
 #define cpu_relax()	barrier()
 
diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h
index 770d516..b0b4824 100644
--- a/arch/sh/include/asm/processor_64.h
+++ b/arch/sh/include/asm/processor_64.h
@@ -17,7 +17,6 @@
 #include <linux/compiler.h>
 #include <asm/page.h>
 #include <asm/types.h>
-#include <asm/cache.h>
 #include <asm/ptrace.h>
 #include <cpu/registers.h>
 
@@ -36,46 +35,6 @@ __asm__("gettr	tr0, %1\n\t" \
 	: "1" (__dummy)); \
 pc; })
 
-/*
- * TLB information structure
- *
- * Defined for both I and D tlb, per-processor.
- */
-struct tlb_info {
-	unsigned long long next;
-	unsigned long long first;
-	unsigned long long last;
-
-	unsigned int entries;
-	unsigned int step;
-
-	unsigned long flags;
-};
-
-struct sh_cpuinfo {
-	enum cpu_type type;
-	unsigned long loops_per_jiffy;
-	unsigned long asid_cache;
-
-	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
-
-	/* Cache info */
-	struct cache_info icache;
-	struct cache_info dcache;
-	struct cache_info scache;
-
-	/* TLB info */
-	struct tlb_info itlb;
-	struct tlb_info dtlb;
-
-	unsigned long flags;
-};
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
-
 #endif
 
 /*
@@ -169,8 +128,6 @@ struct thread_struct {
 #define INIT_MMAP \
 { &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
 
-extern  struct pt_regs fake_swapper_regs;
-
 #define INIT_THREAD  {				\
 	.sp		= sizeof(init_stack) +	\
 			  (long) &init_stack,	\
@@ -269,6 +226,8 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)  ((tsk)->thread.pc)
 #define KSTK_ESP(tsk)  ((tsk)->thread.sp)
 
+#define user_stack_pointer(regs)	((regs)->sp)
+
 #define cpu_relax()	barrier()
 
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index b86aeab..3ad18e9 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -87,12 +87,18 @@ struct pt_dspregs {
 	unsigned long	mod;
 };
 
+#define PTRACE_GETREGS		12	/* General registers */
+#define PTRACE_SETREGS		13
+
+#define PTRACE_GETFPREGS	14	/* FPU registers */
+#define PTRACE_SETFPREGS	15
+
 #define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
 
 #define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
 #define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
 
-#define	PTRACE_GETDSPREGS	55
+#define	PTRACE_GETDSPREGS	55	/* DSP registers */
 #define	PTRACE_SETDSPREGS	56
 #endif
 
@@ -117,6 +123,9 @@ extern void user_disable_single_step(struct task_struct *);
 #define task_pt_regs(task) \
 	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
 		 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
+#define task_pt_dspregs(task) \
+	((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE \
+		 - sizeof(unsigned long)) - 1)
 #else
 #define task_pt_regs(task) \
 	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
diff --git a/arch/sh/include/asm/r7780rp.h b/arch/sh/include/asm/r7780rp.h
deleted file mode 100644
index 306f735..0000000
--- a/arch/sh/include/asm/r7780rp.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef __ASM_SH_RENESAS_R7780RP_H
-#define __ASM_SH_RENESAS_R7780RP_H
-
-/* Box specific addresses.  */
-#if defined(CONFIG_SH_R7780MP)
-#define PA_BCR          0xa4000000      /* FPGA */
-#define PA_SDPOW	(-1)
-
-#define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
-#define PA_IRLPRI2      (PA_BCR+0x0006) /* Interrupt Priorty 2 */
-#define PA_IRLPRI3      (PA_BCR+0x0008) /* Interrupt Priorty 3 */
-#define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
-#define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
-#define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
-#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
-#define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
-#define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
-#define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
-#define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
-#define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
-#define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
-#define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS       (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS       (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBSW         (PA_BCR+0x0200) /* Debug Board Switch control */
-#define PA_CFCTL        (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW        (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR   (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR0       (PA_BCR+0x0400) /* SCIF0 Serial mode control */
-#define PA_SCBRR0       (PA_BCR+0x0404) /* SCIF0 Bit rate control */
-#define PA_SCSCR0       (PA_BCR+0x0408) /* SCIF0 Serial control */
-#define PA_SCFTDR0      (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
-#define PA_SCFSR0       (PA_BCR+0x0410) /* SCIF0 Serial status control */
-#define PA_SCFRDR0      (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
-#define PA_SCFCR0       (PA_BCR+0x0418) /* SCIF0 FIFO control */
-#define PA_SCTFDR0      (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
-#define PA_SCRFDR0      (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
-#define PA_SCSPTR0      (PA_BCR+0x0424) /* SCIF0 Serial Port control */
-#define PA_SCLSR0       (PA_BCR+0x0428) /* SCIF0 Line Status control */
-#define PA_SCRER0       (PA_BCR+0x042c) /* SCIF0 Serial Error control */
-#define PA_SCSMR1       (PA_BCR+0x0500) /* SCIF1 Serial mode control */
-#define PA_SCBRR1       (PA_BCR+0x0504) /* SCIF1 Bit rate control */
-#define PA_SCSCR1       (PA_BCR+0x0508) /* SCIF1 Serial control */
-#define PA_SCFTDR1      (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
-#define PA_SCFSR1       (PA_BCR+0x0510) /* SCIF1 Serial status control */
-#define PA_SCFRDR1      (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
-#define PA_SCFCR1       (PA_BCR+0x0518) /* SCIF1 FIFO control */
-#define PA_SCTFDR1      (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
-#define PA_SCRFDR1      (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
-#define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
-#define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
-#define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
-#define PA_SMCR         (PA_BCR+0x0600) /* 2-wire Serial control */
-#define PA_SMSMADR      (PA_BCR+0x0602) /* 2-wire Serial Slave control */
-#define PA_SMMR         (PA_BCR+0x0604) /* 2-wire Serial Mode control */
-#define PA_SMSADR1      (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
-#define PA_SMTRDR1      (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
-#define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
-#define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
-#define PA_PMR          (PA_BCR+0x0900) /*  */
-
-#define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
-#define IVDR_CK_ON	8		/* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7780RP)
-#define PA_POFF		(-1)
-
-#define PA_BCR		0xa5000000	/* FPGA */
-#define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
-#define PA_IRLMON	(PA_BCR+0x0002)	/* Interrupt Status control */
-#define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
-#define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
-#define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
-#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
-#define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
-#define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
-#define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
-#define	PA_ZIGIO4	(PA_BCR+0x0012)	/* Zigbee IO control 4 */
-#define	PA_IVDRMON	(PA_BCR+0x0014)	/* iVDR Moniter control */
-#define	PA_IVDRCTL	(PA_BCR+0x0016)	/* iVDR control */
-#define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
-#define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
-#define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
-#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extention Pin Polarity control */
-#define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
-#define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
-#define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
-#define PA_TPXPOS	(PA_BCR+0x0106)	/* Touch Panel X position control */
-#define PA_TPYPOS	(PA_BCR+0x0108)	/* Touch Panel Y position control */
-#define PA_DBDET	(PA_BCR+0x0200)	/* Debug Board detect control */
-#define PA_DBDISPCTL	(PA_BCR+0x0202)	/* Debug Board Dot timing control */
-#define PA_DBSW		(PA_BCR+0x0204)	/* Debug Board Switch control */
-#define PA_CFCTL	(PA_BCR+0x0300)	/* CF Timing control */
-#define PA_CFPOW	(PA_BCR+0x0302)	/* CF Power control */
-#define PA_CFCDINTCLR	(PA_BCR+0x0304)	/* CF Insert Interrupt clear */
-#define PA_SCSMR	(PA_BCR+0x0400)	/* SCIF Serial mode control */
-#define PA_SCBRR	(PA_BCR+0x0402)	/* SCIF Bit rate control */
-#define PA_SCSCR	(PA_BCR+0x0404)	/* SCIF Serial control */
-#define PA_SCFDTR	(PA_BCR+0x0406)	/* SCIF Send FIFO control */
-#define PA_SCFSR	(PA_BCR+0x0408)	/* SCIF Serial status control */
-#define PA_SCFRDR	(PA_BCR+0x040a)	/* SCIF Receive FIFO control */
-#define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
-#define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
-#define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
-#define PA_SMCR		(PA_BCR+0x0500)	/* 2-wire Serial control */
-#define PA_SMSMADR	(PA_BCR+0x0502)	/* 2-wire Serial Slave control */
-#define PA_SMMR		(PA_BCR+0x0504)	/* 2-wire Serial Mode control */
-#define PA_SMSADR1	(PA_BCR+0x0506)	/* 2-wire Serial Address1 control */
-#define PA_SMTRDR1	(PA_BCR+0x0546)	/* 2-wire Serial Data1 control */
-#define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
-
-#define PA_AX88796L	0xa5800400	/* AX88796L Area */
-#define PA_SC1602BSLB	0xa6000000	/* SC1602BSLB Area */
-#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
-#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
-
-#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
-
-#define IVDR_CK_ON	8		/* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7785RP)
-#define PA_BCR		0xa4000000	/* FPGA */
-#define PA_SDPOW	(-1)
-
-#define	PA_PCISCR	(PA_BCR+0x0000)
-#define PA_IRLPRA	(PA_BCR+0x0002)
-#define	PA_IRLPRB	(PA_BCR+0x0004)
-#define	PA_IRLPRC	(PA_BCR+0x0006)
-#define	PA_IRLPRD	(PA_BCR+0x0008)
-#define IRLCNTR1	(PA_BCR+0x0010)
-#define	PA_IRLPRE	(PA_BCR+0x000a)
-#define	PA_IRLPRF	(PA_BCR+0x000c)
-#define	PA_EXIRLCR	(PA_BCR+0x000e)
-#define	PA_IRLMCR1	(PA_BCR+0x0010)
-#define	PA_IRLMCR2	(PA_BCR+0x0012)
-#define	PA_IRLSSR1	(PA_BCR+0x0014)
-#define	PA_IRLSSR2	(PA_BCR+0x0016)
-#define PA_CFTCR	(PA_BCR+0x0100)
-#define PA_CFPCR	(PA_BCR+0x0102)
-#define PA_PCICR	(PA_BCR+0x0110)
-#define PA_IVDRCTL	(PA_BCR+0x0112)
-#define PA_IVDRSR	(PA_BCR+0x0114)
-#define PA_PDRSTCR	(PA_BCR+0x0116)
-#define PA_POFF		(PA_BCR+0x0120)
-#define PA_LCDCR	(PA_BCR+0x0130)
-#define PA_TPCR		(PA_BCR+0x0140)
-#define PA_TPCKCR	(PA_BCR+0x0142)
-#define PA_TPRSTR	(PA_BCR+0x0144)
-#define PA_TPXPDR	(PA_BCR+0x0146)
-#define PA_TPYPDR	(PA_BCR+0x0148)
-#define PA_GPIOPFR	(PA_BCR+0x0150)
-#define PA_GPIODR	(PA_BCR+0x0152)
-#define PA_OBLED	(PA_BCR+0x0154)
-#define PA_SWSR		(PA_BCR+0x0156)
-#define PA_VERREG	(PA_BCR+0x0158)
-#define PA_SMCR		(PA_BCR+0x0200)
-#define PA_SMSMADR	(PA_BCR+0x0202)
-#define PA_SMMR		(PA_BCR+0x0204)
-#define PA_SMSADR1	(PA_BCR+0x0206)
-#define PA_SMSADR32	(PA_BCR+0x0244)
-#define PA_SMTRDR1	(PA_BCR+0x0246)
-#define PA_SMTRDR16	(PA_BCR+0x0264)
-#define PA_CU3MDR	(PA_BCR+0x0300)
-#define PA_CU5MDR	(PA_BCR+0x0302)
-#define PA_MMSR		(PA_BCR+0x0400)
-
-#define IVDR_CK_ON	4		/* iVDR Clock ON */
-#endif
-
-#define HL_FPGA_IRQ_BASE	200
-#define HL_NR_IRL		15
-
-#define IRQ_AX88796		(HL_FPGA_IRQ_BASE + 0)
-#define IRQ_CF			(HL_FPGA_IRQ_BASE + 1)
-#define IRQ_PSW			(HL_FPGA_IRQ_BASE + 2)
-#define IRQ_EXT0		(HL_FPGA_IRQ_BASE + 3)
-#define IRQ_EXT1		(HL_FPGA_IRQ_BASE + 4)
-#define IRQ_EXT2		(HL_FPGA_IRQ_BASE + 5)
-#define IRQ_EXT3		(HL_FPGA_IRQ_BASE + 6)
-#define IRQ_EXT4		(HL_FPGA_IRQ_BASE + 7)
-#define IRQ_EXT5		(HL_FPGA_IRQ_BASE + 8)
-#define IRQ_EXT6		(HL_FPGA_IRQ_BASE + 9)
-#define IRQ_EXT7		(HL_FPGA_IRQ_BASE + 10)
-#define IRQ_SMBUS		(HL_FPGA_IRQ_BASE + 11)
-#define IRQ_TP			(HL_FPGA_IRQ_BASE + 12)
-#define IRQ_RTC			(HL_FPGA_IRQ_BASE + 13)
-#define IRQ_TH_ALERT		(HL_FPGA_IRQ_BASE + 14)
-#define IRQ_SCIF0		(HL_FPGA_IRQ_BASE + 15)
-#define IRQ_SCIF1		(HL_FPGA_IRQ_BASE + 16)
-
-unsigned char *highlander_plat_irq_setup(void);
-
-#endif  /* __ASM_SH_RENESAS_R7780RP */
diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h
index 1813f42..f7b010d 100644
--- a/arch/sh/include/asm/rtc.h
+++ b/arch/sh/include/asm/rtc.h
@@ -1,6 +1,7 @@
 #ifndef _ASM_RTC_H
 #define _ASM_RTC_H
 
+void time_init(void);
 extern void (*board_time_init)(void);
 extern void (*rtc_sh_get_time)(struct timespec *);
 extern int (*rtc_sh_set_time)(const time_t);
diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h
index 55a2bd3..d450bcf 100644
--- a/arch/sh/include/asm/setup.h
+++ b/arch/sh/include/asm/setup.h
@@ -4,7 +4,6 @@
 #define COMMAND_LINE_SIZE 256
 
 #ifdef __KERNEL__
-
 /*
  * This is set up by the setup-routine at boot-time
  */
diff --git a/arch/sh/include/asm/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h
deleted file mode 100644
index 130102f..0000000
--- a/arch/sh/include/asm/sh_mobile_lcdc.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __ASM_SH_MOBILE_LCDC_H__
-#define __ASM_SH_MOBILE_LCDC_H__
-
-#include <linux/fb.h>
-
-enum { RGB8,   /* 24bpp, 8:8:8 */
-       RGB9,   /* 18bpp, 9:9 */
-       RGB12A, /* 24bpp, 12:12 */
-       RGB12B, /* 12bpp */
-       RGB16,  /* 16bpp */
-       RGB18,  /* 18bpp */
-       RGB24,  /* 24bpp */
-       SYS8A,  /* 24bpp, 8:8:8 */
-       SYS8B,  /* 18bpp, 8:8:2 */
-       SYS8C,  /* 18bpp, 2:8:8 */
-       SYS8D,  /* 16bpp, 8:8 */
-       SYS9,   /* 18bpp, 9:9 */
-       SYS12,  /* 24bpp, 12:12 */
-       SYS16A, /* 16bpp */
-       SYS16B, /* 18bpp, 16:2 */
-       SYS16C, /* 18bpp, 2:16 */
-       SYS18,  /* 18bpp */
-       SYS24 };/* 24bpp */
-
-enum { LCDC_CHAN_DISABLED = 0,
-       LCDC_CHAN_MAINLCD,
-       LCDC_CHAN_SUBLCD };
-
-enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL };
-
-struct sh_mobile_lcdc_sys_bus_cfg {
-	unsigned long ldmt2r;
-	unsigned long ldmt3r;
-};
-
-struct sh_mobile_lcdc_sys_bus_ops {
-	void (*write_index)(void *handle, unsigned long data);
-	void (*write_data)(void *handle, unsigned long data);
-	unsigned long (*read_data)(void *handle);
-};
-
-struct sh_mobile_lcdc_board_cfg {
-	void *board_data;
-	int (*setup_sys)(void *board_data, void *sys_ops_handle,
-			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-	void (*display_on)(void *board_data);
-	void (*display_off)(void *board_data);
-};
-
-struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
-	unsigned long width;
-	unsigned long height;
-};
-
-struct sh_mobile_lcdc_chan_cfg {
-	int chan;
-	int bpp;
-	int interface_type; /* selects RGBn or SYSn I/F, see above */
-	int clock_divider;
-	struct fb_videomode lcd_cfg;
-	struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
-	struct sh_mobile_lcdc_board_cfg board_cfg;
-	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
-};
-
-struct sh_mobile_lcdc_info {
-	unsigned long lddckr;
-	int clock_source;
-	struct sh_mobile_lcdc_chan_cfg ch[2];
-};
-
-#endif /* __ASM_SH_MOBILE_LCDC_H__ */
diff --git a/arch/sh/include/asm/sizes.h b/arch/sh/include/asm/sizes.h
new file mode 100644
index 0000000..3a1fb97
--- /dev/null
+++ b/arch/sh/include/asm/sizes.h
@@ -0,0 +1,61 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/*  Size definitions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h                       1
+
+/* handy sizes */
+#define SZ_16				0x00000010
+#define SZ_32				0x00000020
+#define SZ_64				0x00000040
+#define SZ_128				0x00000080
+#define SZ_256				0x00000100
+#define SZ_512				0x00000200
+
+#define SZ_1K                           0x00000400
+#define SZ_4K                           0x00001000
+#define SZ_8K                           0x00002000
+#define SZ_16K                          0x00004000
+#define SZ_32K				0x00008000
+#define SZ_64K                          0x00010000
+#define SZ_128K                         0x00020000
+#define SZ_256K                         0x00040000
+#define SZ_512K                         0x00080000
+
+#define SZ_1M                           0x00100000
+#define SZ_2M                           0x00200000
+#define SZ_4M                           0x00400000
+#define SZ_8M                           0x00800000
+#define SZ_16M                          0x01000000
+#define SZ_26M				0x01a00000
+#define SZ_32M                          0x02000000
+#define SZ_64M                          0x04000000
+#define SZ_128M                         0x08000000
+#define SZ_256M                         0x10000000
+#define SZ_512M                         0x20000000
+
+#define SZ_1G                           0x40000000
+#define SZ_2G                           0x80000000
+
+#endif
+
+/*         END */
diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h
index 593343c..85b660c 100644
--- a/arch/sh/include/asm/smp.h
+++ b/arch/sh/include/asm/smp.h
@@ -21,25 +21,29 @@ extern int __cpu_number_map[NR_CPUS];
 extern int __cpu_logical_map[NR_CPUS];
 #define cpu_logical_map(cpu)  __cpu_logical_map[cpu]
 
-/* I've no idea what the real meaning of this is */
-#define PROC_CHANGE_PENALTY	20
+enum {
+	SMP_MSG_FUNCTION,
+	SMP_MSG_RESCHEDULE,
+	SMP_MSG_FUNCTION_SINGLE,
+	SMP_MSG_TIMER,
 
-#define NO_PROC_ID	(-1)
+	SMP_MSG_NR,	/* must be last */
+};
 
-#define SMP_MSG_FUNCTION	0
-#define SMP_MSG_RESCHEDULE	1
-#define SMP_MSG_FUNCTION_SINGLE	2
-#define SMP_MSG_NR		3
+void smp_message_recv(unsigned int msg);
+void smp_timer_broadcast(cpumask_t mask);
+
+void local_timer_interrupt(void);
+void local_timer_setup(unsigned int cpu);
 
 void plat_smp_setup(void);
 void plat_prepare_cpus(unsigned int max_cpus);
 int plat_smp_processor_id(void);
 void plat_start_cpu(unsigned int cpu, unsigned long entry_point);
 void plat_send_ipi(unsigned int cpu, unsigned int message);
-int plat_register_ipi_handler(unsigned int message,
-			      void (*handler)(void *), void *arg);
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+
+void arch_send_call_function_single_ipi(int cpu);
+void arch_send_call_function_ipi(cpumask_t mask);
 
 #else
 
diff --git a/arch/sh/include/asm/syscall.h b/arch/sh/include/asm/syscall.h
new file mode 100644
index 0000000..6a38142
--- /dev/null
+++ b/arch/sh/include/asm/syscall.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SH_SYSCALL_H
+#define __ASM_SH_SYSCALL_H
+
+#ifdef CONFIG_SUPERH32
+# include "syscall_32.h"
+#else
+# include "syscall_64.h"
+#endif
+
+#endif /* __ASM_SH_SYSCALL_H */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
new file mode 100644
index 0000000..54773f2
--- /dev/null
+++ b/arch/sh/include/asm/syscall_32.h
@@ -0,0 +1,110 @@
+#ifndef __ASM_SH_SYSCALL_32_H
+#define __ASM_SH_SYSCALL_32_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in %g1 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return (regs->tra >= 0) ? regs->regs[3] : -1L;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/*
+	 * XXX: This needs some thought. On SH we don't
+	 * save away the original r0 value anywhere.
+	 */
+}
+
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+	return (regs->sr & 0x1) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+	regs->sr |= 0x1;
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+	regs->sr &= ~0x1;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return syscall_has_error(regs) ? regs->regs[0] : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		syscall_set_error(regs);
+		regs->regs[0] = -error;
+	} else {
+		syscall_clear_error(regs);
+		regs->regs[0] = val;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	/*
+	 * Do this simply for now. If we need to start supporting
+	 * fetching arguments from arbitrary indices, this will need some
+	 * extra logic. Presently there are no in-tree users that depend
+	 * on this behaviour.
+	 */
+	BUG_ON(i);
+
+	/* Argument pattern is: R4, R5, R6, R7, R0, R1 */
+	switch (n) {
+	case 6: args[5] = regs->regs[1];
+	case 5: args[4] = regs->regs[0];
+	case 4: args[3] = regs->regs[7];
+	case 3: args[2] = regs->regs[6];
+	case 2: args[1] = regs->regs[5];
+	case 1:	args[0] = regs->regs[4];
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	/* Same note as above applies */
+	BUG_ON(i);
+
+	switch (n) {
+	case 6: regs->regs[1] = args[5];
+	case 5: regs->regs[0] = args[4];
+	case 4: regs->regs[7] = args[3];
+	case 3: regs->regs[6] = args[2];
+	case 2: regs->regs[5] = args[1];
+	case 1: regs->regs[4] = args[0];
+		break;
+	default:
+		BUG();
+	}
+}
+
+#endif /* __ASM_SH_SYSCALL_32_H */
diff --git a/arch/sh/include/asm/syscall_64.h b/arch/sh/include/asm/syscall_64.h
new file mode 100644
index 0000000..bcaaa8c
--- /dev/null
+++ b/arch/sh/include/asm/syscall_64.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_SYSCALL_64_H
+#define __ASM_SH_SYSCALL_64_H
+
+#include <asm-generic/syscall.h>
+
+#endif /* __ASM_SH_SYSCALL_64_H */
diff --git a/arch/sh/include/asm/syscalls.h b/arch/sh/include/asm/syscalls.h
new file mode 100644
index 0000000..c1e2b8d
--- /dev/null
+++ b/arch/sh/include/asm/syscalls.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_SH_SYSCALLS_H
+#define __ASM_SH_SYSCALLS_H
+
+#ifdef __KERNEL__
+
+struct old_utsname;
+
+asmlinkage int old_mmap(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			int fd, unsigned long off);
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			  unsigned long prot, unsigned long flags,
+			  unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_ipc(uint call, int first, int second,
+		       int third, void __user *ptr, long fifth);
+asmlinkage int sys_uname(struct old_utsname __user *name);
+
+#ifdef CONFIG_SUPERH32
+# include "syscalls_32.h"
+#else
+# include "syscalls_64.h"
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_SYSCALLS_H */
diff --git a/arch/sh/include/asm/syscalls_32.h b/arch/sh/include/asm/syscalls_32.h
new file mode 100644
index 0000000..104c5e6
--- /dev/null
+++ b/arch/sh/include/asm/syscalls_32.h
@@ -0,0 +1,56 @@
+#ifndef __ASM_SH_SYSCALLS_32_H
+#define __ASM_SH_SYSCALLS_32_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+asmlinkage int sys_fork(unsigned long r4, unsigned long r5,
+			unsigned long r6, unsigned long r7,
+			struct pt_regs __regs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+			 unsigned long parent_tidptr,
+			 unsigned long child_tidptr,
+			 struct pt_regs __regs);
+asmlinkage int sys_vfork(unsigned long r4, unsigned long r5,
+			 unsigned long r6, unsigned long r7,
+			 struct pt_regs __regs);
+asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
+			  char __user * __user *uenvp, unsigned long r7,
+			  struct pt_regs __regs);
+asmlinkage int sys_sigsuspend(old_sigset_t mask, unsigned long r5,
+			      unsigned long r6, unsigned long r7,
+			      struct pt_regs __regs);
+asmlinkage int sys_sigaction(int sig, const struct old_sigaction __user *act,
+			     struct old_sigaction __user *oact);
+asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
+			       unsigned long r6, unsigned long r7,
+			       struct pt_regs __regs);
+asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5,
+			     unsigned long r6, unsigned long r7,
+			     struct pt_regs __regs);
+asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
+				unsigned long r6, unsigned long r7,
+				struct pt_regs __regs);
+asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
+			unsigned long r6, unsigned long r7,
+			struct pt_regs __regs);
+asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
+				     size_t count, long dummy, loff_t pos);
+asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
+				      size_t count, long dummy, loff_t pos);
+asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
+					u32 len0, u32 len1, int advice);
+
+/* Misc syscall related bits */
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
+asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
+				 unsigned long thread_info_flags);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_SYSCALLS_32_H */
diff --git a/arch/sh/include/asm/syscalls_64.h b/arch/sh/include/asm/syscalls_64.h
new file mode 100644
index 0000000..751fd88
--- /dev/null
+++ b/arch/sh/include/asm/syscalls_64.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_SH_SYSCALLS_64_H
+#define __ASM_SH_SYSCALLS_64_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+asmlinkage int sys_fork(unsigned long r2, unsigned long r3,
+			unsigned long r4, unsigned long r5,
+			unsigned long r6, unsigned long r7,
+			struct pt_regs *pregs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+			 unsigned long r4, unsigned long r5,
+			 unsigned long r6, unsigned long r7,
+			 struct pt_regs *pregs);
+asmlinkage int sys_vfork(unsigned long r2, unsigned long r3,
+			 unsigned long r4, unsigned long r5,
+			 unsigned long r6, unsigned long r7,
+			 struct pt_regs *pregs);
+asmlinkage int sys_execve(char *ufilename, char **uargv,
+			  char **uenvp, unsigned long r5,
+			  unsigned long r6, unsigned long r7,
+			  struct pt_regs *pregs);
+
+/* Misc syscall related bits */
+asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs);
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_SYSCALLS_64_H */
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index 056d68c..6160fe4 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -70,6 +70,8 @@
 
 #ifdef CONFIG_GUSA_RB
 #include <asm/cmpxchg-grb.h>
+#elif defined(CONFIG_CPU_SH4A)
+#include <asm/cmpxchg-llsc.h>
 #else
 #include <asm/cmpxchg-irq.h>
 #endif
@@ -125,6 +127,8 @@ static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
   })
 
 extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+void free_initmem(void);
+void free_initrd_mem(unsigned long start, unsigned long end);
 
 extern void *set_exception_table_vec(unsigned int vec, void *handler);
 
@@ -177,8 +181,8 @@ BUILD_TRAP_HANDLER(fpu_state_restore);
 #define arch_align_stack(x) (x)
 
 struct mem_access {
-	unsigned long (*from)(void *dst, const void *src, unsigned long cnt);
-	unsigned long (*to)(void *dst, const void *src, unsigned long cnt);
+	unsigned long (*from)(void *dst, const void __user *src, unsigned long cnt);
+	unsigned long (*to)(void __user *dst, const void *src, unsigned long cnt);
 };
 
 #ifdef CONFIG_SUPERH32
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index f11bcf0..a726d5d 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -58,7 +58,8 @@ do {									\
 	last = __last;							\
 } while (0)
 
-#define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text")))
+#define __uses_jump_to_uncached \
+	noinline __attribute__ ((__section__ (".uncached.text")))
 
 /*
  * Jump to uncached area.
@@ -96,7 +97,48 @@ do {							\
 		: "=&r" (__dummy));			\
 } while (0)
 
+#ifdef CONFIG_CPU_HAS_SR_RB
+#define lookup_exception_vector()	\
+({					\
+	unsigned long _vec;		\
+					\
+	__asm__ __volatile__ (		\
+		"stc r2_bank, %0\n\t"	\
+		: "=r" (_vec)		\
+	);				\
+					\
+	_vec;				\
+})
+#else
+#define lookup_exception_vector()	\
+({					\
+	unsigned long _vec;		\
+	__asm__ __volatile__ (		\
+		"mov r4, %0\n\t"	\
+		: "=r" (_vec)		\
+	);				\
+					\
+	_vec;				\
+})
+#endif
+
 int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs,
 			    struct mem_access *ma);
 
+asmlinkage void do_address_error(struct pt_regs *regs,
+				 unsigned long writeaccess,
+				 unsigned long address);
+asmlinkage void do_divide_error(unsigned long r4, unsigned long r5,
+				unsigned long r6, unsigned long r7,
+				struct pt_regs __regs);
+asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5,
+				unsigned long r6, unsigned long r7,
+				struct pt_regs __regs);
+asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5,
+				unsigned long r6, unsigned long r7,
+				struct pt_regs __regs);
+asmlinkage void do_exception_error(unsigned long r4, unsigned long r5,
+				   unsigned long r6, unsigned long r7,
+				   struct pt_regs __regs);
+
 #endif /* __ASM_SH_SYSTEM_32_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index 0a894ca..f09ac48 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -33,20 +33,12 @@ struct thread_info {
 #define PREEMPT_ACTIVE		0x10000000
 
 #if defined(CONFIG_4KSTACKS)
-#define THREAD_SIZE_ORDER	(0)
-#elif defined(CONFIG_PAGE_SIZE_4KB)
-#define THREAD_SIZE_ORDER	(1)
-#elif defined(CONFIG_PAGE_SIZE_8KB)
-#define THREAD_SIZE_ORDER	(1)
-#elif defined(CONFIG_PAGE_SIZE_16KB)
-#define THREAD_SIZE_ORDER	(0)
-#elif defined(CONFIG_PAGE_SIZE_64KB)
-#define THREAD_SIZE_ORDER	(0)
+#define THREAD_SHIFT	12
 #else
-#error "Unknown thread size"
+#define THREAD_SHIFT	13
 #endif
 
-#define THREAD_SIZE	(PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_SIZE	(1 << THREAD_SHIFT)
 #define STACK_WARN	(THREAD_SIZE >> 3)
 
 /*
@@ -94,15 +86,19 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
+/* thread information allocation */
+#if THREAD_SHIFT >= PAGE_SHIFT
+
+#define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
+
+#else /* THREAD_SHIFT < PAGE_SHIFT */
+
 #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
 
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(ti)	kzalloc(THREAD_SIZE, GFP_KERNEL)
-#else
-#define alloc_thread_info(ti)	kmalloc(THREAD_SIZE, GFP_KERNEL)
-#endif
-#define free_thread_info(ti)	kfree(ti)
+extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
+extern void free_thread_info(struct thread_info *ti);
+ 
+#endif /* THREAD_SHIFT < PAGE_SHIFT */
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
index 5580fd4..56fd20b 100644
--- a/arch/sh/include/asm/uaccess_64.h
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -26,16 +26,20 @@ do {								\
 	retval = 0;						\
 	switch (size) {						\
 	case 1:							\
-		retval = __get_user_asm_b(x, ptr);		\
+		retval = __get_user_asm_b((void *)&x,		\
+					  (long)ptr);		\
 		break;						\
 	case 2:							\
-		retval = __get_user_asm_w(x, ptr);		\
+		retval = __get_user_asm_w((void *)&x,		\
+					  (long)ptr);		\
 		break;						\
 	case 4:							\
-		retval = __get_user_asm_l(x, ptr);		\
+		retval = __get_user_asm_l((void *)&x,		\
+					  (long)ptr);		\
 		break;						\
 	case 8:							\
-		retval = __get_user_asm_q(x, ptr);		\
+		retval = __get_user_asm_q((void *)&x,		\
+					  (long)ptr);		\
 		break;						\
 	default:						\
 		__get_user_unknown();				\
@@ -54,16 +58,20 @@ do {								\
 	retval = 0;						\
 	switch (size) {						\
 	case 1:							\
-		retval = __put_user_asm_b(x, ptr);		\
+		retval = __put_user_asm_b((void *)&x,		\
+					  (long)ptr);		\
 		break;						\
 	case 2:							\
-		retval = __put_user_asm_w(x, ptr);		\
+		retval = __put_user_asm_w((void *)&x,		\
+					  (long)ptr);		\
 		break;						\
 	case 4:							\
-		retval = __put_user_asm_l(x, ptr);		\
+		retval = __put_user_asm_l((void *)&x,		\
+					  (long)ptr);		\
 		break;						\
 	case 8:							\
-		retval = __put_user_asm_q(x, ptr);		\
+		retval = __put_user_asm_q((void *)&x,		\
+					  (long)ptr);		\
 		break;						\
 	default:						\
 		__put_user_unknown();				\
@@ -77,5 +85,7 @@ extern long __put_user_asm_q(void *, long);
 extern void __put_user_unknown(void);
 
 extern long __strnlen_user(const char *__s, long __n);
+extern int __strncpy_from_user(unsigned long __dest,
+	       unsigned long __user __src, int __count);
 
 #endif /* __ASM_SH_UACCESS_64_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7203.h b/arch/sh/include/cpu-sh2a/cpu/sh7203.h
new file mode 100644
index 0000000..79f9315
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7203.h
@@ -0,0 +1,143 @@
+#ifndef __ASM_SH7203_H__
+#define __ASM_SH7203_H__
+
+enum {
+	/* PA */
+	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+	GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+	/* PB */
+	GPIO_PB12,
+	GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
+
+	/* PC */
+	GPIO_PC14, GPIO_PC13, GPIO_PC12,
+	GPIO_PC11, GPIO_PC10, GPIO_PC9, GPIO_PC8,
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* PD */
+	GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
+	GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* PE */
+	GPIO_PE15, GPIO_PE14, GPIO_PE13, GPIO_PE12,
+	GPIO_PE11, GPIO_PE10, GPIO_PE9, GPIO_PE8,
+	GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
+	GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
+
+	/* PF */
+	GPIO_PF30, GPIO_PF29, GPIO_PF28,
+	GPIO_PF27, GPIO_PF26, GPIO_PF25, GPIO_PF24,
+	GPIO_PF23, GPIO_PF22, GPIO_PF21, GPIO_PF20,
+	GPIO_PF19, GPIO_PF18, GPIO_PF17, GPIO_PF16,
+	GPIO_PF15, GPIO_PF14, GPIO_PF13, GPIO_PF12,
+	GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* INTC: IRQ and PINT on PB/PD/PE */
+	GPIO_FN_PINT7_PB, GPIO_FN_PINT6_PB, GPIO_FN_PINT5_PB, GPIO_FN_PINT4_PB,
+	GPIO_FN_PINT3_PB, GPIO_FN_PINT2_PB, GPIO_FN_PINT1_PB, GPIO_FN_PINT0_PB,
+	GPIO_FN_PINT7_PD, GPIO_FN_PINT6_PD, GPIO_FN_PINT5_PD, GPIO_FN_PINT4_PD,
+	GPIO_FN_PINT3_PD, GPIO_FN_PINT2_PD, GPIO_FN_PINT1_PD, GPIO_FN_PINT0_PD,
+	GPIO_FN_IRQ7_PB, GPIO_FN_IRQ6_PB, GPIO_FN_IRQ5_PB, GPIO_FN_IRQ4_PB,
+	GPIO_FN_IRQ3_PB, GPIO_FN_IRQ2_PB, GPIO_FN_IRQ1_PB, GPIO_FN_IRQ0_PB,
+	GPIO_FN_IRQ7_PD, GPIO_FN_IRQ6_PD, GPIO_FN_IRQ5_PD, GPIO_FN_IRQ4_PD,
+	GPIO_FN_IRQ3_PD, GPIO_FN_IRQ2_PD, GPIO_FN_IRQ1_PD, GPIO_FN_IRQ0_PD,
+	GPIO_FN_IRQ7_PE, GPIO_FN_IRQ6_PE, GPIO_FN_IRQ5_PE, GPIO_FN_IRQ4_PE,
+	GPIO_FN_IRQ3_PE, GPIO_FN_IRQ2_PE, GPIO_FN_IRQ1_PE, GPIO_FN_IRQ0_PE,
+
+	GPIO_FN_WDTOVF, GPIO_FN_IRQOUT, GPIO_FN_REFOUT, GPIO_FN_IRQOUT_REFOUT,
+	GPIO_FN_UBCTRG,
+
+	/* CAN */
+	GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
+	GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1,
+
+	/* IIC3 */
+	GPIO_FN_SDA3, GPIO_FN_SCL3,
+	GPIO_FN_SDA2, GPIO_FN_SCL2,
+	GPIO_FN_SDA1, GPIO_FN_SCL1,
+	GPIO_FN_SDA0, GPIO_FN_SCL0,
+
+	/* DMAC */
+	GPIO_FN_TEND0_PD, GPIO_FN_TEND0_PE, GPIO_FN_DACK0_PD,
+	GPIO_FN_DACK0_PE, GPIO_FN_DREQ0_PD, GPIO_FN_DREQ0_PE,
+	GPIO_FN_TEND1_PD, GPIO_FN_TEND1_PE, GPIO_FN_DACK1_PD,
+	GPIO_FN_DACK1_PE, GPIO_FN_DREQ1_PD, GPIO_FN_DREQ1_PE,
+	GPIO_FN_DACK2, GPIO_FN_DREQ2,
+	GPIO_FN_DACK3, GPIO_FN_DREQ3,
+
+	/* ADC */
+	GPIO_FN_ADTRG_PD, GPIO_FN_ADTRG_PE,
+
+	/* BSC */
+	GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+	GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+	GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+	GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+	GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+	GPIO_FN_A21, GPIO_FN_CS4, GPIO_FN_MRES, GPIO_FN_BS,
+	GPIO_FN_IOIS16, GPIO_FN_CS1, GPIO_FN_CS6_CE1B,
+	GPIO_FN_CE2B, GPIO_FN_CS5_CE1A, GPIO_FN_CE2A,
+	GPIO_FN_FRAME, GPIO_FN_WAIT, GPIO_FN_RDWR,
+	GPIO_FN_CKE, GPIO_FN_CASU, GPIO_FN_BREQ, GPIO_FN_RASU,
+	GPIO_FN_BACK, GPIO_FN_CASL, GPIO_FN_RASL,
+	GPIO_FN_WE3_DQMUU_AH_ICIO_WR, GPIO_FN_WE2_DQMUL_ICIORD,
+	GPIO_FN_WE1_DQMLU_WE, GPIO_FN_WE0_DQMLL,
+	GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_A1, GPIO_FN_A0, GPIO_FN_CS7,
+
+	/* TMU */
+	GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
+	GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
+	GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
+	GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
+	GPIO_FN_TCLKD_PD, GPIO_FN_TCLKC_PD, GPIO_FN_TCLKB_PD, GPIO_FN_TCLKA_PD,
+	GPIO_FN_TCLKD_PF, GPIO_FN_TCLKC_PF, GPIO_FN_TCLKB_PF, GPIO_FN_TCLKA_PF,
+
+	/* SSU */
+	GPIO_FN_SCS0_PD, GPIO_FN_SSO0_PD, GPIO_FN_SSI0_PD, GPIO_FN_SSCK0_PD,
+	GPIO_FN_SCS0_PF, GPIO_FN_SSO0_PF, GPIO_FN_SSI0_PF, GPIO_FN_SSCK0_PF,
+	GPIO_FN_SCS1_PD, GPIO_FN_SSO1_PD, GPIO_FN_SSI1_PD, GPIO_FN_SSCK1_PD,
+	GPIO_FN_SCS1_PF, GPIO_FN_SSO1_PF, GPIO_FN_SSI1_PF, GPIO_FN_SSCK1_PF,
+
+	/* SCIF */
+	GPIO_FN_TXD0, GPIO_FN_RXD0, GPIO_FN_SCK0,
+	GPIO_FN_TXD1, GPIO_FN_RXD1, GPIO_FN_SCK1,
+	GPIO_FN_TXD2, GPIO_FN_RXD2, GPIO_FN_SCK2,
+	GPIO_FN_RTS3, GPIO_FN_CTS3, GPIO_FN_TXD3, GPIO_FN_RXD3, GPIO_FN_SCK3,
+
+	/* SSI */
+	GPIO_FN_AUDIO_CLK,
+	GPIO_FN_SSIDATA3, GPIO_FN_SSIWS3, GPIO_FN_SSISCK3,
+	GPIO_FN_SSIDATA2, GPIO_FN_SSIWS2, GPIO_FN_SSISCK2,
+	GPIO_FN_SSIDATA1, GPIO_FN_SSIWS1, GPIO_FN_SSISCK1,
+	GPIO_FN_SSIDATA0, GPIO_FN_SSIWS0, GPIO_FN_SSISCK0,
+
+	/* FLCTL */
+	GPIO_FN_FCE, GPIO_FN_FRB,
+	GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
+	GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0,
+	GPIO_FN_FSC, GPIO_FN_FOE, GPIO_FN_FCDE, GPIO_FN_FWE,
+
+	/* LCDC */
+	GPIO_FN_LCD_VEPWC, GPIO_FN_LCD_VCPWC,
+	GPIO_FN_LCD_CLK, GPIO_FN_LCD_FLM,
+	GPIO_FN_LCD_M_DISP, GPIO_FN_LCD_CL2,
+	GPIO_FN_LCD_CL1, GPIO_FN_LCD_DON,
+	GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
+	GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
+	GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
+	GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
+	GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
+	GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
+	GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
+	GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
+};
+
+#endif /* __ASM_SH7203_H__ */
diff --git a/arch/sh/include/cpu-sh3/cpu/sh7720.h b/arch/sh/include/cpu-sh3/cpu/sh7720.h
new file mode 100644
index 0000000..41c1406
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/sh7720.h
@@ -0,0 +1,174 @@
+#ifndef __ASM_SH7720_H__
+#define __ASM_SH7720_H__
+
+enum {
+	/* PTA */
+	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+	GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+	/* PTB */
+	GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+	GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+	/* PTC */
+	GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
+	GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
+
+	/* PTD */
+	GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+	GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+	/* PTE */
+	GPIO_PTE6, GPIO_PTE5, GPIO_PTE4, GPIO_PTE3,
+	GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
+
+	/* PTF */
+	GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, GPIO_PTF3,
+	GPIO_PTF2, GPIO_PTF1, GPIO_PTF0, GPIO_PTG6,
+
+	/* PTG */
+	GPIO_PTG5, GPIO_PTG4, GPIO_PTG3, GPIO_PTG2,
+	GPIO_PTG1, GPIO_PTG0,
+
+	/* PTH */
+	GPIO_PTH6, GPIO_PTH5, GPIO_PTH4, GPIO_PTH3,
+	GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+	/* PTJ */
+	GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ4, GPIO_PTJ3,
+	GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
+
+	/* PTK */
+	GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+	/* PTL */
+	GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4, GPIO_PTL3,
+
+	/* PTM */
+	GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+	GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+	/* PTP */
+	GPIO_PTP4, GPIO_PTP3, GPIO_PTP2, GPIO_PTP1, GPIO_PTP0,
+
+	/* PTR */
+	GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
+	GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+	/* PTS */
+	GPIO_PTS4, GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+	/* PTT */
+	GPIO_PTT4, GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
+
+	/* PTU */
+	GPIO_PTU4, GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
+
+	/* PTV */
+	GPIO_PTV4, GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+	/* BSC */
+	GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+	GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+	GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+	GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+	GPIO_FN_IOIS16, GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
+	GPIO_FN_CS5B_CE1A, GPIO_FN_CS6B_CE1B,
+	GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+	GPIO_FN_A21, GPIO_FN_A20, GPIO_FN_A19, GPIO_FN_A0,
+	GPIO_FN_REFOUT, GPIO_FN_IRQOUT,
+
+	/* LCDC */
+	GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
+	GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
+	GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
+	GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
+	GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
+	GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
+	GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
+	GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
+	GPIO_FN_LCD_M_DISP,
+	GPIO_FN_LCD_CL1, GPIO_FN_LCD_CL2,
+	GPIO_FN_LCD_DON, GPIO_FN_LCD_FLM,
+	GPIO_FN_LCD_VEPWC, GPIO_FN_LCD_VCPWC,
+
+	/* AFEIF */
+	GPIO_FN_AFE_RXIN, GPIO_FN_AFE_RDET,
+	GPIO_FN_AFE_FS, GPIO_FN_AFE_TXOUT,
+	GPIO_FN_AFE_SCLK, GPIO_FN_AFE_RLYCNT,
+	GPIO_FN_AFE_HC1,
+
+	/* IIC */
+	GPIO_FN_IIC_SCL, GPIO_FN_IIC_SDA,
+
+	/* DAC */
+	GPIO_FN_DA1, GPIO_FN_DA0,
+
+	/* ADC */
+	GPIO_FN_AN3, GPIO_FN_AN2, GPIO_FN_AN1, GPIO_FN_AN0, GPIO_FN_ADTRG,
+
+	/* USB */
+	GPIO_FN_USB1D_RCV, GPIO_FN_USB1D_TXSE0,
+	GPIO_FN_USB1D_TXDPLS, GPIO_FN_USB1D_DMNS,
+	GPIO_FN_USB1D_DPLS, GPIO_FN_USB1D_SPEED,
+	GPIO_FN_USB1D_TXENL, GPIO_FN_USB2_PWR_EN,
+	GPIO_FN_USB1_PWR_EN_USBF_UPLUP, GPIO_FN_USB1D_SUSPEND,
+
+	/* INTC */
+	GPIO_FN_IRQ5, GPIO_FN_IRQ4,
+	GPIO_FN_IRQ3_IRL3, GPIO_FN_IRQ2_IRL2,
+	GPIO_FN_IRQ1_IRL1, GPIO_FN_IRQ0_IRL0,
+
+	/* PCC */
+	GPIO_FN_PCC_REG, GPIO_FN_PCC_DRV,
+	GPIO_FN_PCC_BVD2, GPIO_FN_PCC_BVD1,
+	GPIO_FN_PCC_CD2, GPIO_FN_PCC_CD1,
+	GPIO_FN_PCC_RESET, GPIO_FN_PCC_RDY,
+	GPIO_FN_PCC_VS2, GPIO_FN_PCC_VS1,
+
+	/* HUDI */
+	GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
+	GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_ASEBRKAK, GPIO_FN_TRST,
+	GPIO_FN_TMS, GPIO_FN_TDO, GPIO_FN_TDI, GPIO_FN_TCK,
+
+	/* DMAC */
+	GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DACK0, GPIO_FN_DREQ0,
+	GPIO_FN_TEND1, GPIO_FN_TEND0,
+
+	/* SIOF0 */
+	GPIO_FN_SIOF0_SYNC, GPIO_FN_SIOF0_MCLK,
+	GPIO_FN_SIOF0_TXD, GPIO_FN_SIOF0_RXD,
+	GPIO_FN_SIOF0_SCK,
+
+	/* SIOF1 */
+	GPIO_FN_SIOF1_SYNC, GPIO_FN_SIOF1_MCLK,
+	GPIO_FN_SIOF1_TXD, GPIO_FN_SIOF1_RXD,
+	GPIO_FN_SIOF1_SCK,
+
+	/* SCIF0 */
+	GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD,
+	GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_SCK,
+
+	/* SCIF1 */
+	GPIO_FN_SCIF1_TXD, GPIO_FN_SCIF1_RXD,
+	GPIO_FN_SCIF1_RTS, GPIO_FN_SCIF1_CTS, GPIO_FN_SCIF1_SCK,
+
+	/* TPU */
+	GPIO_FN_TPU_TO1, GPIO_FN_TPU_TO0,
+	GPIO_FN_TPU_TI3B, GPIO_FN_TPU_TI3A,
+	GPIO_FN_TPU_TI2B, GPIO_FN_TPU_TI2A,
+	GPIO_FN_TPU_TO3, GPIO_FN_TPU_TO2,
+
+	/* SIM */
+	GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
+
+	/* MMC */
+	GPIO_FN_MMC_DAT, GPIO_FN_MMC_CMD,
+	GPIO_FN_MMC_CLK, GPIO_FN_MMC_VDDON,
+	GPIO_FN_MMC_ODMOD,
+
+	/* SYSC */
+	GPIO_FN_STATUS0, GPIO_FN_STATUS1,
+};
+
+#endif /* __ASM_SH7720_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h
new file mode 100644
index 0000000..4b3096f
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h
@@ -0,0 +1,210 @@
+#ifndef __ASM_SH7722_H__
+#define __ASM_SH7722_H__
+
+enum {
+	/* PTA */
+	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+	GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+	/* PTB */
+	GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+	GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+	/* PTC */
+	GPIO_PTC7, GPIO_PTC5, GPIO_PTC4, GPIO_PTC3,
+	GPIO_PTC2, GPIO_PTC0,
+
+	/* PTD */
+	GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+	GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+	/* PTE */
+	GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
+	GPIO_PTE1, GPIO_PTE0,
+
+	/* PTF */
+	GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, GPIO_PTF3,
+	GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
+
+	/* PTG */
+	GPIO_PTG4, GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
+
+	/* PTH */
+	GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
+	GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+	/* PTJ */
+	GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ1, GPIO_PTJ0,
+
+	/* PTK */
+	GPIO_PTK6, GPIO_PTK5, GPIO_PTK4, GPIO_PTK3,
+	GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+	/* PTL */
+	GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
+	GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
+
+	/* PTM */
+	GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+	GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+	/* PTN */
+	GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
+	GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
+
+	/* PTQ */
+	GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
+	GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
+
+	/* PTR */
+	GPIO_PTR4, GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+	/* PTS */
+	GPIO_PTS4, GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+	/* PTT */
+	GPIO_PTT4, GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
+
+	/* PTU */
+	GPIO_PTU4, GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
+
+	/* PTV */
+	GPIO_PTV4, GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+	/* PTW */
+	GPIO_PTW6, GPIO_PTW5, GPIO_PTW4, GPIO_PTW3,
+	GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
+
+	/* PTX */
+	GPIO_PTX6, GPIO_PTX5, GPIO_PTX4, GPIO_PTX3,
+	GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
+
+	/* PTY */
+	GPIO_PTY5, GPIO_PTY4, GPIO_PTY3, GPIO_PTY2,
+	GPIO_PTY1, GPIO_PTY0,
+
+	/* PTZ */
+	GPIO_PTZ5, GPIO_PTZ4, GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1,
+
+	/* SCIF0 */
+	GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD,
+	GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_SCK,
+
+	/* SCIF1 */
+	GPIO_FN_SCIF1_TXD, GPIO_FN_SCIF1_RXD,
+	GPIO_FN_SCIF1_RTS, GPIO_FN_SCIF1_CTS, GPIO_FN_SCIF1_SCK,
+
+	/* SCIF2 */
+	GPIO_FN_SCIF2_TXD, GPIO_FN_SCIF2_RXD,
+	GPIO_FN_SCIF2_RTS, GPIO_FN_SCIF2_CTS, GPIO_FN_SCIF2_SCK,
+
+	/* SIO */
+	GPIO_FN_SIOTXD, GPIO_FN_SIORXD,
+	GPIO_FN_SIOD, GPIO_FN_SIOSTRB0, GPIO_FN_SIOSTRB1,
+	GPIO_FN_SIOSCK, GPIO_FN_SIOMCK,
+
+	/* CEU */
+	GPIO_FN_VIO_D15, GPIO_FN_VIO_D14, GPIO_FN_VIO_D13, GPIO_FN_VIO_D12,
+	GPIO_FN_VIO_D11, GPIO_FN_VIO_D10, GPIO_FN_VIO_D9, GPIO_FN_VIO_D8,
+	GPIO_FN_VIO_D7, GPIO_FN_VIO_D6, GPIO_FN_VIO_D5, GPIO_FN_VIO_D4,
+	GPIO_FN_VIO_D3, GPIO_FN_VIO_D2, GPIO_FN_VIO_D1, GPIO_FN_VIO_D0,
+	GPIO_FN_VIO_FLD, GPIO_FN_VIO_CKO, GPIO_FN_VIO_STEX, GPIO_FN_VIO_STEM,
+	GPIO_FN_VIO_VD, GPIO_FN_VIO_HD, GPIO_FN_VIO_CLK,
+	GPIO_FN_VIO_VD2, GPIO_FN_VIO_HD2, GPIO_FN_VIO_CLK2,
+
+	/* LCDC */
+	GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
+	GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
+	GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
+	GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
+	GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
+	GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
+	GPIO_FN_LCDLCLK,
+	/* Main LCD */
+	GPIO_FN_LCDDON, GPIO_FN_LCDVCPWC, GPIO_FN_LCDVEPWC, GPIO_FN_LCDVSYN,
+	/* Main LCD - RGB Mode */
+	GPIO_FN_LCDDCK, GPIO_FN_LCDHSYN, GPIO_FN_LCDDISP,
+	/* Main LCD - SYS Mode */
+	GPIO_FN_LCDRS, GPIO_FN_LCDCS, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
+	/* Sub LCD - SYS Mode */
+	GPIO_FN_LCDDON2, GPIO_FN_LCDVCPWC2, GPIO_FN_LCDVEPWC2,
+	GPIO_FN_LCDVSYN2, GPIO_FN_LCDCS2,
+
+	/* BSC */
+	GPIO_FN_IOIS16, GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+	GPIO_FN_BS, GPIO_FN_CS6B_CE1B, GPIO_FN_WAIT, GPIO_FN_CS6A_CE2B,
+
+	/* SBSC */
+	GPIO_FN_HPD63, GPIO_FN_HPD62, GPIO_FN_HPD61, GPIO_FN_HPD60,
+	GPIO_FN_HPD59, GPIO_FN_HPD58, GPIO_FN_HPD57, GPIO_FN_HPD56,
+	GPIO_FN_HPD55, GPIO_FN_HPD54, GPIO_FN_HPD53, GPIO_FN_HPD52,
+	GPIO_FN_HPD51, GPIO_FN_HPD50, GPIO_FN_HPD49, GPIO_FN_HPD48,
+	GPIO_FN_HPDQM7, GPIO_FN_HPDQM6, GPIO_FN_HPDQM5, GPIO_FN_HPDQM4,
+
+	/* IRQ */
+	GPIO_FN_IRQ0, GPIO_FN_IRQ1, GPIO_FN_IRQ2, GPIO_FN_IRQ3,
+	GPIO_FN_IRQ4, GPIO_FN_IRQ5, GPIO_FN_IRQ6, GPIO_FN_IRQ7,
+
+	/* SDHI */
+	GPIO_FN_SDHICD, GPIO_FN_SDHIWP, GPIO_FN_SDHID3, GPIO_FN_SDHID2,
+	GPIO_FN_SDHID1, GPIO_FN_SDHID0, GPIO_FN_SDHICMD, GPIO_FN_SDHICLK,
+
+	/* SIU - Port A */
+	GPIO_FN_SIUAOLR, GPIO_FN_SIUAOBT, GPIO_FN_SIUAISLD, GPIO_FN_SIUAILR,
+	GPIO_FN_SIUAIBT, GPIO_FN_SIUAOSLD, GPIO_FN_SIUMCKA, GPIO_FN_SIUFCKA,
+
+	/* SIU - Port B */
+	GPIO_FN_SIUBOLR, GPIO_FN_SIUBOBT, GPIO_FN_SIUBISLD, GPIO_FN_SIUBILR,
+	GPIO_FN_SIUBIBT, GPIO_FN_SIUBOSLD, GPIO_FN_SIUMCKB, GPIO_FN_SIUFCKB,
+
+	/* AUD */
+	GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1,
+	GPIO_FN_AUDATA0,
+
+	/* DMAC */
+	GPIO_FN_DACK, GPIO_FN_DREQ0,
+
+	/* VOU */
+	GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_HSYNC, GPIO_FN_DV_VSYNC,
+	GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
+	GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
+	GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
+	GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
+
+	/* CPG */
+	GPIO_FN_STATUS0, GPIO_FN_PDSTATUS,
+
+	/* SIOF0 */
+	GPIO_FN_SIOF0_MCK, GPIO_FN_SIOF0_SCK,
+	GPIO_FN_SIOF0_SYNC, GPIO_FN_SIOF0_SS1, GPIO_FN_SIOF0_SS2,
+	GPIO_FN_SIOF0_TXD, GPIO_FN_SIOF0_RXD,
+
+	/* SIOF1 */
+	GPIO_FN_SIOF1_MCK, GPIO_FN_SIOF1_SCK,
+	GPIO_FN_SIOF1_SYNC, GPIO_FN_SIOF1_SS1, GPIO_FN_SIOF1_SS2,
+	GPIO_FN_SIOF1_TXD, GPIO_FN_SIOF1_RXD,
+
+	/* SIM */
+	GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
+
+	/* TSIF */
+	GPIO_FN_TS_SDAT, GPIO_FN_TS_SCK, GPIO_FN_TS_SDEN, GPIO_FN_TS_SPSYNC,
+
+	/* IRDA */
+	GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
+
+	/* TPU */
+	GPIO_FN_TPUTO,
+
+	/* FLCTL */
+	GPIO_FN_FCE, GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
+	GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0, GPIO_FN_FCDE,
+	GPIO_FN_FOE, GPIO_FN_FSC, GPIO_FN_FWE, GPIO_FN_FRB,
+
+	/* KEYSC */
+	GPIO_FN_KEYIN0, GPIO_FN_KEYIN1, GPIO_FN_KEYIN2, GPIO_FN_KEYIN3,
+	GPIO_FN_KEYIN4, GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
+	GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
+};
+
+#endif /* __ASM_SH7722_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7723.h b/arch/sh/include/cpu-sh4/cpu/sh7723.h
new file mode 100644
index 0000000..9d2f6d7
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sh7723.h
@@ -0,0 +1,254 @@
+#ifndef __ASM_SH7723_H__
+#define __ASM_SH7723_H__
+
+enum {
+	/* PTA */
+	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+	GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+	/* PTB */
+	GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+	GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+	/* PTC */
+	GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
+	GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
+
+	/* PTD */
+	GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+	GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+	/* PTE */
+	GPIO_PTE5, GPIO_PTE4, GPIO_PTE3, GPIO_PTE2,
+	GPIO_PTE1, GPIO_PTE0,
+
+	/* PTF */
+	GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
+	GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
+
+	/* PTG */
+	GPIO_PTG5, GPIO_PTG4, GPIO_PTG3, GPIO_PTG2,
+	GPIO_PTG1, GPIO_PTG0,
+
+	/* PTH */
+	GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
+	GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+	/* PTJ */
+	GPIO_PTJ7, GPIO_PTJ5, GPIO_PTJ3, GPIO_PTJ2,
+	GPIO_PTJ1, GPIO_PTJ0,
+
+	/* PTK */
+	GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
+	GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+	/* PTL */
+	GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
+	GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
+
+	/* PTM */
+	GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+	GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+	/* PTN */
+	GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
+	GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
+
+	/* PTQ */
+	GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
+
+	/* PTR */
+	GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
+	GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+	/* PTS */
+	GPIO_PTS7, GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
+	GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+	/* PTT */
+	GPIO_PTT5, GPIO_PTT4, GPIO_PTT3, GPIO_PTT2,
+	GPIO_PTT1, GPIO_PTT0,
+
+	/* PTU */
+	GPIO_PTU5, GPIO_PTU4, GPIO_PTU3, GPIO_PTU2,
+	GPIO_PTU1, GPIO_PTU0,
+
+	/* PTV */
+	GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
+	GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+	/* PTW */
+	GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
+	GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
+
+	/* PTX */
+	GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
+	GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
+
+	/* PTY */
+	GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
+	GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
+
+	/* PTZ */
+	GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
+	GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
+
+	/* SCIF0 (SCIF: 3 pin PTT/PTU) */
+	GPIO_FN_SCIF0_PTT_TXD, GPIO_FN_SCIF0_PTT_RXD, GPIO_FN_SCIF0_PTT_SCK,
+	GPIO_FN_SCIF0_PTU_TXD, GPIO_FN_SCIF0_PTU_RXD, GPIO_FN_SCIF0_PTU_SCK,
+
+	/* SCIF1 (SCIF: 3 pin PTS/PTV) */
+	GPIO_FN_SCIF1_PTS_TXD, GPIO_FN_SCIF1_PTS_RXD, GPIO_FN_SCIF1_PTS_SCK,
+	GPIO_FN_SCIF1_PTV_TXD, GPIO_FN_SCIF1_PTV_RXD, GPIO_FN_SCIF1_PTV_SCK,
+
+	/* SCIF2 (SCIF: 3 pin PTT/PTU) */
+	GPIO_FN_SCIF2_PTT_TXD, GPIO_FN_SCIF2_PTT_RXD, GPIO_FN_SCIF2_PTT_SCK,
+	GPIO_FN_SCIF2_PTU_TXD, GPIO_FN_SCIF2_PTU_RXD, GPIO_FN_SCIF2_PTU_SCK,
+
+	/* SCIF3 (SCIFA: 5 pin PTS/PTV) */
+	GPIO_FN_SCIF3_PTS_TXD, GPIO_FN_SCIF3_PTS_RXD, GPIO_FN_SCIF3_PTS_SCK,
+	GPIO_FN_SCIF3_PTS_RTS, GPIO_FN_SCIF3_PTS_CTS,
+	GPIO_FN_SCIF3_PTV_TXD, GPIO_FN_SCIF3_PTV_RXD, GPIO_FN_SCIF3_PTV_SCK,
+	GPIO_FN_SCIF3_PTV_RTS, GPIO_FN_SCIF3_PTV_CTS,
+
+	/* SCIF4 (SCIFA: 3 pin PTE/PTN) */
+	GPIO_FN_SCIF4_PTE_TXD, GPIO_FN_SCIF4_PTE_RXD, GPIO_FN_SCIF4_PTE_SCK,
+	GPIO_FN_SCIF4_PTN_TXD, GPIO_FN_SCIF4_PTN_RXD, GPIO_FN_SCIF4_PTN_SCK,
+
+	/* SCIF5 (SCIFA: 3 pin PTE/PTN) */
+	GPIO_FN_SCIF5_PTE_TXD, GPIO_FN_SCIF5_PTE_RXD, GPIO_FN_SCIF5_PTE_SCK,
+	GPIO_FN_SCIF5_PTN_TXD, GPIO_FN_SCIF5_PTN_RXD, GPIO_FN_SCIF5_PTN_SCK,
+
+	/* CEU */
+	GPIO_FN_VIO_D15, GPIO_FN_VIO_D14, GPIO_FN_VIO_D13, GPIO_FN_VIO_D12,
+	GPIO_FN_VIO_D11, GPIO_FN_VIO_D10, GPIO_FN_VIO_D9, GPIO_FN_VIO_D8,
+	GPIO_FN_VIO_D7, GPIO_FN_VIO_D6, GPIO_FN_VIO_D5, GPIO_FN_VIO_D4,
+	GPIO_FN_VIO_D3, GPIO_FN_VIO_D2, GPIO_FN_VIO_D1, GPIO_FN_VIO_D0,
+	GPIO_FN_VIO_FLD, GPIO_FN_VIO_CKO,
+	GPIO_FN_VIO_VD1, GPIO_FN_VIO_HD1, GPIO_FN_VIO_CLK1,
+	GPIO_FN_VIO_VD2, GPIO_FN_VIO_HD2, GPIO_FN_VIO_CLK2,
+
+	/* LCDC */
+	GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
+	GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
+	GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
+	GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
+	GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
+	GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
+	GPIO_FN_LCDLCLK_PTR, GPIO_FN_LCDLCLK_PTW,
+	/* Main LCD */
+	GPIO_FN_LCDDON, GPIO_FN_LCDVCPWC, GPIO_FN_LCDVEPWC, GPIO_FN_LCDVSYN,
+	/* Main LCD - RGB Mode */
+	GPIO_FN_LCDDCK, GPIO_FN_LCDHSYN, GPIO_FN_LCDDISP,
+	/* Main LCD - SYS Mode */
+	GPIO_FN_LCDRS, GPIO_FN_LCDCS, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
+
+	/* IRQ */
+	GPIO_FN_IRQ0, GPIO_FN_IRQ1, GPIO_FN_IRQ2, GPIO_FN_IRQ3,
+	GPIO_FN_IRQ4, GPIO_FN_IRQ5, GPIO_FN_IRQ6, GPIO_FN_IRQ7,
+
+	/* AUD */
+	GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
+	GPIO_FN_AUDCK, GPIO_FN_AUDSYNC,
+
+	/* SDHI0 (PTD) */
+	GPIO_FN_SDHI0CD_PTD, GPIO_FN_SDHI0WP_PTD,
+	GPIO_FN_SDHI0D3_PTD, GPIO_FN_SDHI0D2_PTD,
+	GPIO_FN_SDHI0D1_PTD, GPIO_FN_SDHI0D0_PTD,
+	GPIO_FN_SDHI0CMD_PTD, GPIO_FN_SDHI0CLK_PTD,
+
+	/* SDHI0 (PTS) */
+	GPIO_FN_SDHI0CD_PTS, GPIO_FN_SDHI0WP_PTS,
+	GPIO_FN_SDHI0D3_PTS, GPIO_FN_SDHI0D2_PTS,
+	GPIO_FN_SDHI0D1_PTS, GPIO_FN_SDHI0D0_PTS,
+	GPIO_FN_SDHI0CMD_PTS, GPIO_FN_SDHI0CLK_PTS,
+
+	/* SDHI1 */
+	GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2,
+	GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
+
+	/* SIUA */
+	GPIO_FN_SIUAFCK, GPIO_FN_SIUAILR, GPIO_FN_SIUAIBT, GPIO_FN_SIUAISLD,
+	GPIO_FN_SIUAOLR, GPIO_FN_SIUAOBT, GPIO_FN_SIUAOSLD, GPIO_FN_SIUAMCK,
+	GPIO_FN_SIUAISPD, GPIO_FN_SIUOSPD,
+
+	/* SIUB */
+	GPIO_FN_SIUBFCK, GPIO_FN_SIUBILR, GPIO_FN_SIUBIBT, GPIO_FN_SIUBISLD,
+	GPIO_FN_SIUBOLR, GPIO_FN_SIUBOBT, GPIO_FN_SIUBOSLD, GPIO_FN_SIUBMCK,
+
+	/* IRDA */
+	GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
+
+	/* VOU */
+	GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_HSYNC, GPIO_FN_DV_VSYNC,
+	GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
+	GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
+	GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
+	GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
+
+	/* KEYSC */
+	GPIO_FN_KEYIN0, GPIO_FN_KEYIN1, GPIO_FN_KEYIN2, GPIO_FN_KEYIN3,
+	GPIO_FN_KEYIN4, GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
+	GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
+
+	/* MSIOF0 (PTF) */
+	GPIO_FN_MSIOF0_PTF_TXD, GPIO_FN_MSIOF0_PTF_RXD, GPIO_FN_MSIOF0_PTF_MCK,
+	GPIO_FN_MSIOF0_PTF_TSYNC, GPIO_FN_MSIOF0_PTF_TSCK,
+	GPIO_FN_MSIOF0_PTF_RSYNC, GPIO_FN_MSIOF0_PTF_RSCK,
+	GPIO_FN_MSIOF0_PTF_SS1, GPIO_FN_MSIOF0_PTF_SS2,
+
+	/* MSIOF0 (PTT+PTX) */
+	GPIO_FN_MSIOF0_PTT_TXD, GPIO_FN_MSIOF0_PTT_RXD, GPIO_FN_MSIOF0_PTX_MCK,
+	GPIO_FN_MSIOF0_PTT_TSYNC, GPIO_FN_MSIOF0_PTT_TSCK,
+	GPIO_FN_MSIOF0_PTT_RSYNC, GPIO_FN_MSIOF0_PTT_RSCK,
+	GPIO_FN_MSIOF0_PTT_SS1, GPIO_FN_MSIOF0_PTT_SS2,
+
+	/* MSIOF1 */
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_MCK,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_TSCK,
+	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MSIOF1_RSCK,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2,
+
+	/* TSIF */
+	GPIO_FN_TS0_SDAT, GPIO_FN_TS0_SCK, GPIO_FN_TS0_SDEN, GPIO_FN_TS0_SPSYNC,
+
+	/* FLCTL */
+	GPIO_FN_FCE, GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
+	GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0, GPIO_FN_FCDE,
+	GPIO_FN_FOE, GPIO_FN_FSC, GPIO_FN_FWE, GPIO_FN_FRB,
+
+	/* DMAC */
+	GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DACK0, GPIO_FN_DREQ0,
+
+	/* ADC */
+	GPIO_FN_AN3, GPIO_FN_AN2, GPIO_FN_AN1, GPIO_FN_AN0, GPIO_FN_ADTRG,
+
+	/* CPG */
+	GPIO_FN_STATUS0, GPIO_FN_PDSTATUS,
+
+	/* TPU */
+	GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
+
+	/* BSC */
+	GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+	GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+	GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+	GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+	GPIO_FN_IOIS16, GPIO_FN_WAIT, GPIO_FN_BS,
+	GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+	GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B,
+	GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A,
+	GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
+
+	/* ATAPI */
+	GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
+	GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8,
+	GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4,
+	GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0,
+	GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
+	GPIO_FN_IODREQ, GPIO_FN_IDEIORDY, GPIO_FN_IDEINT, GPIO_FN_IDEIOWR,
+	GPIO_FN_IDEIORD, GPIO_FN_IDECS1, GPIO_FN_IDECS0, GPIO_FN_IDEA2,
+	GPIO_FN_IDEA1, GPIO_FN_IDEA0,
+};
+
+#endif /* __ASM_SH7723_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7785.h b/arch/sh/include/cpu-sh4/cpu/sh7785.h
new file mode 100644
index 0000000..e4006af
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sh7785.h
@@ -0,0 +1,234 @@
+#ifndef __ASM_SH7785_H__
+#define __ASM_SH7785_H__
+
+enum {
+	/* PA */
+	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+	GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+	/* PB */
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
+
+	/* PC */
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* PD */
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* PE */
+	GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2,
+	GPIO_PE1, GPIO_PE0,
+
+	/* PF */
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* PG */
+	GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
+	GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
+
+	/* PH */
+	GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
+	GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+
+	/* PJ */
+	GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
+	GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
+
+	/* PK */
+	GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4,
+	GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0,
+
+	/* PL */
+	GPIO_PL7, GPIO_PL6, GPIO_PL5, GPIO_PL4,
+	GPIO_PL3, GPIO_PL2, GPIO_PL1, GPIO_PL0,
+
+	/* PM */
+	GPIO_PM1, GPIO_PM0,
+
+	/* PN */
+	GPIO_PN7, GPIO_PN6, GPIO_PN5, GPIO_PN4,
+	GPIO_PN3, GPIO_PN2, GPIO_PN1, GPIO_PN0,
+
+	/* PP */
+	GPIO_PP5, GPIO_PP4,
+	GPIO_PP3, GPIO_PP2, GPIO_PP1, GPIO_PP0,
+
+	/* PQ */
+	GPIO_PQ4,
+	GPIO_PQ3, GPIO_PQ2, GPIO_PQ1, GPIO_PQ0,
+
+	/* PR */
+	GPIO_PR3, GPIO_PR2, GPIO_PR1, GPIO_PR0,
+
+	GPIO_FN_D63_AD31,
+	GPIO_FN_D62_AD30,
+	GPIO_FN_D61_AD29,
+	GPIO_FN_D60_AD28,
+	GPIO_FN_D59_AD27,
+	GPIO_FN_D58_AD26,
+	GPIO_FN_D57_AD25,
+	GPIO_FN_D56_AD24,
+	GPIO_FN_D55_AD23,
+	GPIO_FN_D54_AD22,
+	GPIO_FN_D53_AD21,
+	GPIO_FN_D52_AD20,
+	GPIO_FN_D51_AD19,
+	GPIO_FN_D50_AD18,
+	GPIO_FN_D49_AD17_DB5,
+	GPIO_FN_D48_AD16_DB4,
+	GPIO_FN_D47_AD15_DB3,
+	GPIO_FN_D46_AD14_DB2,
+	GPIO_FN_D45_AD13_DB1,
+	GPIO_FN_D44_AD12_DB0,
+	GPIO_FN_D43_AD11_DG5,
+	GPIO_FN_D42_AD10_DG4,
+	GPIO_FN_D41_AD9_DG3,
+	GPIO_FN_D40_AD8_DG2,
+	GPIO_FN_D39_AD7_DG1,
+	GPIO_FN_D38_AD6_DG0,
+	GPIO_FN_D37_AD5_DR5,
+	GPIO_FN_D36_AD4_DR4,
+	GPIO_FN_D35_AD3_DR3,
+	GPIO_FN_D34_AD2_DR2,
+	GPIO_FN_D33_AD1_DR1,
+	GPIO_FN_D32_AD0_DR0,
+	GPIO_FN_REQ1,
+	GPIO_FN_REQ2,
+	GPIO_FN_REQ3,
+	GPIO_FN_GNT1,
+	GPIO_FN_GNT2,
+	GPIO_FN_GNT3,
+	GPIO_FN_MMCCLK,
+	GPIO_FN_D31,
+	GPIO_FN_D30,
+	GPIO_FN_D29,
+	GPIO_FN_D28,
+	GPIO_FN_D27,
+	GPIO_FN_D26,
+	GPIO_FN_D25,
+	GPIO_FN_D24,
+	GPIO_FN_D23,
+	GPIO_FN_D22,
+	GPIO_FN_D21,
+	GPIO_FN_D20,
+	GPIO_FN_D19,
+	GPIO_FN_D18,
+	GPIO_FN_D17,
+	GPIO_FN_D16,
+	GPIO_FN_SCIF1_SCK,
+	GPIO_FN_SCIF1_RXD,
+	GPIO_FN_SCIF1_TXD,
+	GPIO_FN_SCIF0_CTS,
+	GPIO_FN_INTD,
+	GPIO_FN_FCE,
+	GPIO_FN_SCIF0_RTS,
+	GPIO_FN_HSPI_CS,
+	GPIO_FN_FSE,
+	GPIO_FN_SCIF0_SCK,
+	GPIO_FN_HSPI_CLK,
+	GPIO_FN_FRE,
+	GPIO_FN_SCIF0_RXD,
+	GPIO_FN_HSPI_RX,
+	GPIO_FN_FRB,
+	GPIO_FN_SCIF0_TXD,
+	GPIO_FN_HSPI_TX,
+	GPIO_FN_FWE,
+	GPIO_FN_SCIF5_TXD,
+	GPIO_FN_HAC1_SYNC,
+	GPIO_FN_SSI1_WS,
+	GPIO_FN_SIOF_TXD_PJ,
+	GPIO_FN_HAC0_SDOUT,
+	GPIO_FN_SSI0_SDATA,
+	GPIO_FN_SIOF_RXD_PJ,
+	GPIO_FN_HAC0_SDIN,
+	GPIO_FN_SSI0_SCK,
+	GPIO_FN_SIOF_SYNC_PJ,
+	GPIO_FN_HAC0_SYNC,
+	GPIO_FN_SSI0_WS,
+	GPIO_FN_SIOF_MCLK_PJ,
+	GPIO_FN_HAC_RES,
+	GPIO_FN_SIOF_SCK_PJ,
+	GPIO_FN_HAC0_BITCLK,
+	GPIO_FN_SSI0_CLK,
+	GPIO_FN_HAC1_BITCLK,
+	GPIO_FN_SSI1_CLK,
+	GPIO_FN_TCLK,
+	GPIO_FN_IOIS16,
+	GPIO_FN_STATUS0,
+	GPIO_FN_DRAK0_PK3,
+	GPIO_FN_STATUS1,
+	GPIO_FN_DRAK1_PK2,
+	GPIO_FN_DACK2,
+	GPIO_FN_SCIF2_TXD,
+	GPIO_FN_MMCCMD,
+	GPIO_FN_SIOF_TXD_PK,
+	GPIO_FN_DACK3,
+	GPIO_FN_SCIF2_SCK,
+	GPIO_FN_MMCDAT,
+	GPIO_FN_SIOF_SCK_PK,
+	GPIO_FN_DREQ0,
+	GPIO_FN_DREQ1,
+	GPIO_FN_DRAK0_PK1,
+	GPIO_FN_DRAK1_PK0,
+	GPIO_FN_DREQ2,
+	GPIO_FN_INTB,
+	GPIO_FN_DREQ3,
+	GPIO_FN_INTC,
+	GPIO_FN_DRAK2,
+	GPIO_FN_CE2A,
+	GPIO_FN_IRL4,
+	GPIO_FN_FD4,
+	GPIO_FN_IRL5,
+	GPIO_FN_FD5,
+	GPIO_FN_IRL6,
+	GPIO_FN_FD6,
+	GPIO_FN_IRL7,
+	GPIO_FN_FD7,
+	GPIO_FN_DRAK3,
+	GPIO_FN_CE2B,
+	GPIO_FN_BREQ_BSACK,
+	GPIO_FN_BACK_BSREQ,
+	GPIO_FN_SCIF5_RXD,
+	GPIO_FN_HAC1_SDIN,
+	GPIO_FN_SSI1_SCK,
+	GPIO_FN_SCIF5_SCK,
+	GPIO_FN_HAC1_SDOUT,
+	GPIO_FN_SSI1_SDATA,
+	GPIO_FN_SCIF3_TXD,
+	GPIO_FN_FCLE,
+	GPIO_FN_SCIF3_RXD,
+	GPIO_FN_FALE,
+	GPIO_FN_SCIF3_SCK,
+	GPIO_FN_FD0,
+	GPIO_FN_SCIF4_TXD,
+	GPIO_FN_FD1,
+	GPIO_FN_SCIF4_RXD,
+	GPIO_FN_FD2,
+	GPIO_FN_SCIF4_SCK,
+	GPIO_FN_FD3,
+	GPIO_FN_DEVSEL_DCLKOUT,
+	GPIO_FN_STOP_CDE,
+	GPIO_FN_LOCK_ODDF,
+	GPIO_FN_TRDY_DISPL,
+	GPIO_FN_IRDY_HSYNC,
+	GPIO_FN_PCIFRAME_VSYNC,
+	GPIO_FN_INTA,
+	GPIO_FN_GNT0_GNTIN,
+	GPIO_FN_REQ0_REQOUT,
+	GPIO_FN_PERR,
+	GPIO_FN_SERR,
+	GPIO_FN_WE7_CBE3,
+	GPIO_FN_WE6_CBE2,
+	GPIO_FN_WE5_CBE1,
+	GPIO_FN_WE4_CBE0,
+	GPIO_FN_SCIF2_RXD,
+	GPIO_FN_SIOF_RXD,
+	GPIO_FN_MRESETOUT,
+	GPIO_FN_IRQOUT,
+};
+
+#endif /* __ASM_SH7785_H__ */
diff --git a/arch/sh/include/asm/edosk7705.h b/arch/sh/include/mach-common/mach/edosk7705.h
index 5bdc9d9..5bdc9d9 100644
--- a/arch/sh/include/asm/edosk7705.h
+++ b/arch/sh/include/mach-common/mach/edosk7705.h
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
new file mode 100644
index 0000000..bd26a84
--- /dev/null
+++ b/arch/sh/include/mach-common/mach/highlander.h
@@ -0,0 +1,204 @@
+#ifndef __ASM_SH_RENESAS_R7780RP_H
+#define __ASM_SH_RENESAS_R7780RP_H
+
+/* Box specific addresses.  */
+#if defined(CONFIG_SH_R7780MP)
+#define PA_BCR          0xa4000000      /* FPGA */
+#define PA_SDPOW	(-1)
+
+#define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
+#define PA_IRLPRI2      (PA_BCR+0x0006) /* Interrupt Priorty 2 */
+#define PA_IRLPRI3      (PA_BCR+0x0008) /* Interrupt Priorty 3 */
+#define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
+#define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
+#define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
+#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
+#define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
+#define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
+#define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
+#define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
+#define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS       (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS       (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBSW         (PA_BCR+0x0200) /* Debug Board Switch control */
+#define PA_CFCTL        (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW        (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR   (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR0       (PA_BCR+0x0400) /* SCIF0 Serial mode control */
+#define PA_SCBRR0       (PA_BCR+0x0404) /* SCIF0 Bit rate control */
+#define PA_SCSCR0       (PA_BCR+0x0408) /* SCIF0 Serial control */
+#define PA_SCFTDR0      (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
+#define PA_SCFSR0       (PA_BCR+0x0410) /* SCIF0 Serial status control */
+#define PA_SCFRDR0      (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
+#define PA_SCFCR0       (PA_BCR+0x0418) /* SCIF0 FIFO control */
+#define PA_SCTFDR0      (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
+#define PA_SCRFDR0      (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
+#define PA_SCSPTR0      (PA_BCR+0x0424) /* SCIF0 Serial Port control */
+#define PA_SCLSR0       (PA_BCR+0x0428) /* SCIF0 Line Status control */
+#define PA_SCRER0       (PA_BCR+0x042c) /* SCIF0 Serial Error control */
+#define PA_SCSMR1       (PA_BCR+0x0500) /* SCIF1 Serial mode control */
+#define PA_SCBRR1       (PA_BCR+0x0504) /* SCIF1 Bit rate control */
+#define PA_SCSCR1       (PA_BCR+0x0508) /* SCIF1 Serial control */
+#define PA_SCFTDR1      (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
+#define PA_SCFSR1       (PA_BCR+0x0510) /* SCIF1 Serial status control */
+#define PA_SCFRDR1      (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
+#define PA_SCFCR1       (PA_BCR+0x0518) /* SCIF1 FIFO control */
+#define PA_SCTFDR1      (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
+#define PA_SCRFDR1      (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
+#define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
+#define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
+#define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
+#define PA_SMCR         (PA_BCR+0x0600) /* 2-wire Serial control */
+#define PA_SMSMADR      (PA_BCR+0x0602) /* 2-wire Serial Slave control */
+#define PA_SMMR         (PA_BCR+0x0604) /* 2-wire Serial Mode control */
+#define PA_SMSADR1      (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
+#define PA_SMTRDR1      (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
+#define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
+#define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
+#define PA_PMR          (PA_BCR+0x0900) /*  */
+
+#define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7780RP)
+#define PA_POFF		(-1)
+
+#define PA_BCR		0xa5000000	/* FPGA */
+#define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
+#define PA_IRLMON	(PA_BCR+0x0002)	/* Interrupt Status control */
+#define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
+#define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
+#define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
+#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
+#define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
+#define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
+#define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
+#define	PA_ZIGIO4	(PA_BCR+0x0012)	/* Zigbee IO control 4 */
+#define	PA_IVDRMON	(PA_BCR+0x0014)	/* iVDR Moniter control */
+#define	PA_IVDRCTL	(PA_BCR+0x0016)	/* iVDR control */
+#define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
+#define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
+#define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
+#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extention Pin Polarity control */
+#define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
+#define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
+#define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
+#define PA_TPXPOS	(PA_BCR+0x0106)	/* Touch Panel X position control */
+#define PA_TPYPOS	(PA_BCR+0x0108)	/* Touch Panel Y position control */
+#define PA_DBDET	(PA_BCR+0x0200)	/* Debug Board detect control */
+#define PA_DBDISPCTL	(PA_BCR+0x0202)	/* Debug Board Dot timing control */
+#define PA_DBSW		(PA_BCR+0x0204)	/* Debug Board Switch control */
+#define PA_CFCTL	(PA_BCR+0x0300)	/* CF Timing control */
+#define PA_CFPOW	(PA_BCR+0x0302)	/* CF Power control */
+#define PA_CFCDINTCLR	(PA_BCR+0x0304)	/* CF Insert Interrupt clear */
+#define PA_SCSMR	(PA_BCR+0x0400)	/* SCIF Serial mode control */
+#define PA_SCBRR	(PA_BCR+0x0402)	/* SCIF Bit rate control */
+#define PA_SCSCR	(PA_BCR+0x0404)	/* SCIF Serial control */
+#define PA_SCFDTR	(PA_BCR+0x0406)	/* SCIF Send FIFO control */
+#define PA_SCFSR	(PA_BCR+0x0408)	/* SCIF Serial status control */
+#define PA_SCFRDR	(PA_BCR+0x040a)	/* SCIF Receive FIFO control */
+#define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
+#define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
+#define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
+#define PA_SMCR		(PA_BCR+0x0500)	/* 2-wire Serial control */
+#define PA_SMSMADR	(PA_BCR+0x0502)	/* 2-wire Serial Slave control */
+#define PA_SMMR		(PA_BCR+0x0504)	/* 2-wire Serial Mode control */
+#define PA_SMSADR1	(PA_BCR+0x0506)	/* 2-wire Serial Address1 control */
+#define PA_SMTRDR1	(PA_BCR+0x0546)	/* 2-wire Serial Data1 control */
+#define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
+
+#define PA_AX88796L	0xa5800400	/* AX88796L Area */
+#define PA_SC1602BSLB	0xa6000000	/* SC1602BSLB Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7785RP)
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_SDPOW	(-1)
+
+#define	PA_PCISCR	(PA_BCR+0x0000)
+#define PA_IRLPRA	(PA_BCR+0x0002)
+#define	PA_IRLPRB	(PA_BCR+0x0004)
+#define	PA_IRLPRC	(PA_BCR+0x0006)
+#define	PA_IRLPRD	(PA_BCR+0x0008)
+#define IRLCNTR1	(PA_BCR+0x0010)
+#define	PA_IRLPRE	(PA_BCR+0x000a)
+#define	PA_IRLPRF	(PA_BCR+0x000c)
+#define	PA_EXIRLCR	(PA_BCR+0x000e)
+#define	PA_IRLMCR1	(PA_BCR+0x0010)
+#define	PA_IRLMCR2	(PA_BCR+0x0012)
+#define	PA_IRLSSR1	(PA_BCR+0x0014)
+#define	PA_IRLSSR2	(PA_BCR+0x0016)
+#define PA_CFTCR	(PA_BCR+0x0100)
+#define PA_CFPCR	(PA_BCR+0x0102)
+#define PA_PCICR	(PA_BCR+0x0110)
+#define PA_IVDRCTL	(PA_BCR+0x0112)
+#define PA_IVDRSR	(PA_BCR+0x0114)
+#define PA_PDRSTCR	(PA_BCR+0x0116)
+#define PA_POFF		(PA_BCR+0x0120)
+#define PA_LCDCR	(PA_BCR+0x0130)
+#define PA_TPCR		(PA_BCR+0x0140)
+#define PA_TPCKCR	(PA_BCR+0x0142)
+#define PA_TPRSTR	(PA_BCR+0x0144)
+#define PA_TPXPDR	(PA_BCR+0x0146)
+#define PA_TPYPDR	(PA_BCR+0x0148)
+#define PA_GPIOPFR	(PA_BCR+0x0150)
+#define PA_GPIODR	(PA_BCR+0x0152)
+#define PA_OBLED	(PA_BCR+0x0154)
+#define PA_SWSR		(PA_BCR+0x0156)
+#define PA_VERREG	(PA_BCR+0x0158)
+#define PA_SMCR		(PA_BCR+0x0200)
+#define PA_SMSMADR	(PA_BCR+0x0202)
+#define PA_SMMR		(PA_BCR+0x0204)
+#define PA_SMSADR1	(PA_BCR+0x0206)
+#define PA_SMSADR32	(PA_BCR+0x0244)
+#define PA_SMTRDR1	(PA_BCR+0x0246)
+#define PA_SMTRDR16	(PA_BCR+0x0264)
+#define PA_CU3MDR	(PA_BCR+0x0300)
+#define PA_CU5MDR	(PA_BCR+0x0302)
+#define PA_MMSR		(PA_BCR+0x0400)
+
+#define IVDR_CK_ON	4		/* iVDR Clock ON */
+#endif
+
+#define HL_FPGA_IRQ_BASE	200
+#define HL_NR_IRL		15
+
+#define IRQ_AX88796		(HL_FPGA_IRQ_BASE + 0)
+#define IRQ_CF			(HL_FPGA_IRQ_BASE + 1)
+#define IRQ_PSW			(HL_FPGA_IRQ_BASE + 2)
+#define IRQ_EXT0		(HL_FPGA_IRQ_BASE + 3)
+#define IRQ_EXT1		(HL_FPGA_IRQ_BASE + 4)
+#define IRQ_EXT2		(HL_FPGA_IRQ_BASE + 5)
+#define IRQ_EXT3		(HL_FPGA_IRQ_BASE + 6)
+#define IRQ_EXT4		(HL_FPGA_IRQ_BASE + 7)
+#define IRQ_EXT5		(HL_FPGA_IRQ_BASE + 8)
+#define IRQ_EXT6		(HL_FPGA_IRQ_BASE + 9)
+#define IRQ_EXT7		(HL_FPGA_IRQ_BASE + 10)
+#define IRQ_SMBUS		(HL_FPGA_IRQ_BASE + 11)
+#define IRQ_TP			(HL_FPGA_IRQ_BASE + 12)
+#define IRQ_RTC			(HL_FPGA_IRQ_BASE + 13)
+#define IRQ_TH_ALERT		(HL_FPGA_IRQ_BASE + 14)
+#define IRQ_SCIF0		(HL_FPGA_IRQ_BASE + 15)
+#define IRQ_SCIF1		(HL_FPGA_IRQ_BASE + 16)
+
+unsigned char *highlander_plat_irq_setup(void);
+
+#ifdef CONFIG_SH_R7785RP
+void highlander_plat_pinmux_setup(void);
+#else
+#define highlander_plat_pinmux_setup()	do { } while (0)
+#endif
+
+#endif  /* __ASM_SH_RENESAS_R7780RP */
diff --git a/arch/sh/include/asm/hp6xx.h b/arch/sh/include/mach-common/mach/hp6xx.h
index 0d4165a..0d4165a 100644
--- a/arch/sh/include/asm/hp6xx.h
+++ b/arch/sh/include/mach-common/mach/hp6xx.h
diff --git a/arch/sh/include/asm/lboxre2.h b/arch/sh/include/mach-common/mach/lboxre2.h
index e6d1605..e6d1605 100644
--- a/arch/sh/include/asm/lboxre2.h
+++ b/arch/sh/include/mach-common/mach/lboxre2.h
diff --git a/arch/sh/include/asm/magicpanelr2.h b/arch/sh/include/mach-common/mach/magicpanelr2.h
index c644a77..c644a77 100644
--- a/arch/sh/include/asm/magicpanelr2.h
+++ b/arch/sh/include/mach-common/mach/magicpanelr2.h
diff --git a/arch/sh/include/asm/microdev.h b/arch/sh/include/mach-common/mach/microdev.h
index 1aed158..1aed158 100644
--- a/arch/sh/include/asm/microdev.h
+++ b/arch/sh/include/mach-common/mach/microdev.h
diff --git a/arch/sh/include/mach-common/mach/migor.h b/arch/sh/include/mach-common/mach/migor.h
new file mode 100644
index 0000000..e451f02
--- /dev/null
+++ b/arch/sh/include/mach-common/mach/migor.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_SH_MIGOR_H
+#define __ASM_SH_MIGOR_H
+
+/*
+ * linux/include/asm-sh/migor.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ *
+ * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* GPIO */
+#define PORT_PACR 0xa4050100
+#define PORT_PDCR 0xa4050106
+#define PORT_PECR 0xa4050108
+#define PORT_PHCR 0xa405010e
+#define PORT_PJCR 0xa4050110
+#define PORT_PKCR 0xa4050112
+#define PORT_PLCR 0xa4050114
+#define PORT_PMCR 0xa4050116
+#define PORT_PRCR 0xa405011c
+#define PORT_PTCR 0xa4050140
+#define PORT_PUCR 0xa4050142
+#define PORT_PVCR 0xa4050144
+#define PORT_PWCR 0xa4050146
+#define PORT_PXCR 0xa4050148
+#define PORT_PYCR 0xa405014a
+#define PORT_PZCR 0xa405014c
+#define PORT_PADR 0xa4050120
+#define PORT_PHDR 0xa405012e
+#define PORT_PTDR 0xa4050160
+#define PORT_PWDR 0xa4050166
+
+#define PORT_HIZCRA 0xa4050158
+#define PORT_HIZCRC 0xa405015c
+
+#define PORT_MSELCRB 0xa4050182
+
+#define PORT_PSELA 0xa405014e
+#define PORT_PSELB 0xa4050150
+#define PORT_PSELC 0xa4050152
+#define PORT_PSELD 0xa4050154
+#define PORT_PSELE 0xa4050156
+
+#define PORT_HIZCRA 0xa4050158
+#define PORT_HIZCRB 0xa405015a
+#define PORT_HIZCRC 0xa405015c
+
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS6ABCR 0xfec1001c
+#define BSC_CS4WCR 0xfec10030
+
+#include <video/sh_mobile_lcdc.h>
+
+int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+
+#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/asm/rts7751r2d.h b/arch/sh/include/mach-common/mach/r2d.h
index 0a80015..0a80015 100644
--- a/arch/sh/include/asm/rts7751r2d.h
+++ b/arch/sh/include/mach-common/mach/r2d.h
diff --git a/arch/sh/include/asm/sdk7780.h b/arch/sh/include/mach-common/mach/sdk7780.h
index 697dc86..697dc86 100644
--- a/arch/sh/include/asm/sdk7780.h
+++ b/arch/sh/include/mach-common/mach/sdk7780.h
diff --git a/arch/sh/include/asm/sh7763rdp.h b/arch/sh/include/mach-common/mach/sh7763rdp.h
index 8750cc8..8750cc8 100644
--- a/arch/sh/include/asm/sh7763rdp.h
+++ b/arch/sh/include/mach-common/mach/sh7763rdp.h
diff --git a/arch/sh/include/asm/sh7785lcr.h b/arch/sh/include/mach-common/mach/sh7785lcr.h
index 1ce27d5..1ce27d5 100644
--- a/arch/sh/include/asm/sh7785lcr.h
+++ b/arch/sh/include/mach-common/mach/sh7785lcr.h
diff --git a/arch/sh/include/asm/shmin.h b/arch/sh/include/mach-common/mach/shmin.h
index 36ba138..36ba138 100644
--- a/arch/sh/include/asm/shmin.h
+++ b/arch/sh/include/mach-common/mach/shmin.h
diff --git a/arch/sh/include/asm/snapgear.h b/arch/sh/include/mach-common/mach/snapgear.h
index 042d95f..042d95f 100644
--- a/arch/sh/include/asm/snapgear.h
+++ b/arch/sh/include/mach-common/mach/snapgear.h
diff --git a/arch/sh/include/asm/systemh7751.h b/arch/sh/include/mach-common/mach/systemh7751.h
index 4161122..4161122 100644
--- a/arch/sh/include/asm/systemh7751.h
+++ b/arch/sh/include/mach-common/mach/systemh7751.h
diff --git a/arch/sh/include/asm/titan.h b/arch/sh/include/mach-common/mach/titan.h
index 03f3583..03f3583 100644
--- a/arch/sh/include/asm/titan.h
+++ b/arch/sh/include/mach-common/mach/titan.h
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 0e6905f..48edfb1 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -21,7 +21,8 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_ELF_CORE)		+= dump_task.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index 6edf53b..c97660b 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -17,7 +17,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_BINFMT_ELF)	+= dump_task.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index f5eb56e..b7e46d5 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -294,9 +294,10 @@ arch_init_clk_ops(struct clk_ops **ops, int type)
 {
 }
 
-void __init __attribute__ ((weak))
+int __init __attribute__ ((weak))
 arch_clk_init(void)
 {
+	return 0;
 }
 
 static int show_clocks(char *buf, char **start, off_t off,
@@ -331,7 +332,7 @@ int __init clk_init(void)
 		ret |= clk_register(clk);
 	}
 
-	arch_clk_init();
+	ret |= arch_clk_init();
 
 	/* Kick the child clocks.. */
 	propagate_rate(&master_clk);
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index 462a8f6..f0c7025 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -1,8 +1,6 @@
 #
 # Makefile for the Linux/SuperH CPU-specifc IRQ handlers.
 #
-obj-y	+= intc.o
-
 obj-$(CONFIG_SUPERH32)			+= imask.o
 obj-$(CONFIG_CPU_SH5)			+= intc-sh5.o
 obj-$(CONFIG_CPU_HAS_IPR_IRQ)		+= ipr.o
diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c
deleted file mode 100644
index 8c70e20..0000000
--- a/arch/sh/kernel/cpu/irq/intc.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- * Shared interrupt handling code for IPR and INTC2 types of IRQs.
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- *
- * Based on intc2.c and ipr.c
- *
- * Copyright (C) 1999  Niibe Yutaka & Takeshi Yaegashi
- * Copyright (C) 2000  Kazumoto Kojima
- * Copyright (C) 2001  David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003  Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Copyright (C) 2005, 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/bootmem.h>
-
-#define _INTC_MK(fn, mode, addr_e, addr_d, width, shift) \
-	((shift) | ((width) << 5) | ((fn) << 9) | ((mode) << 13) | \
-	 ((addr_e) << 16) | ((addr_d << 24)))
-
-#define _INTC_SHIFT(h) (h & 0x1f)
-#define _INTC_WIDTH(h) ((h >> 5) & 0xf)
-#define _INTC_FN(h) ((h >> 9) & 0xf)
-#define _INTC_MODE(h) ((h >> 13) & 0x7)
-#define _INTC_ADDR_E(h) ((h >> 16) & 0xff)
-#define _INTC_ADDR_D(h) ((h >> 24) & 0xff)
-
-struct intc_handle_int {
-	unsigned int irq;
-	unsigned long handle;
-};
-
-struct intc_desc_int {
-	unsigned long *reg;
-#ifdef CONFIG_SMP
-	unsigned long *smp;
-#endif
-	unsigned int nr_reg;
-	struct intc_handle_int *prio;
-	unsigned int nr_prio;
-	struct intc_handle_int *sense;
-	unsigned int nr_sense;
-	struct irq_chip chip;
-};
-
-#ifdef CONFIG_SMP
-#define IS_SMP(x) x.smp
-#define INTC_REG(d, x, c) (d->reg[(x)] + ((d->smp[(x)] & 0xff) * c))
-#define SMP_NR(d, x) ((d->smp[(x)] >> 8) ? (d->smp[(x)] >> 8) : 1)
-#else
-#define IS_SMP(x) 0
-#define INTC_REG(d, x, c) (d->reg[(x)])
-#define SMP_NR(d, x) 1
-#endif
-
-static unsigned int intc_prio_level[NR_IRQS]; /* for now */
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
-static unsigned long ack_handle[NR_IRQS];
-#endif
-
-static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
-{
-	struct irq_chip *chip = get_irq_chip(irq);
-	return (void *)((char *)chip - offsetof(struct intc_desc_int, chip));
-}
-
-static inline unsigned int set_field(unsigned int value,
-				     unsigned int field_value,
-				     unsigned int handle)
-{
-	unsigned int width = _INTC_WIDTH(handle);
-	unsigned int shift = _INTC_SHIFT(handle);
-
-	value &= ~(((1 << width) - 1) << shift);
-	value |= field_value << shift;
-	return value;
-}
-
-static void write_8(unsigned long addr, unsigned long h, unsigned long data)
-{
-	ctrl_outb(set_field(0, data, h), addr);
-}
-
-static void write_16(unsigned long addr, unsigned long h, unsigned long data)
-{
-	ctrl_outw(set_field(0, data, h), addr);
-}
-
-static void write_32(unsigned long addr, unsigned long h, unsigned long data)
-{
-	ctrl_outl(set_field(0, data, h), addr);
-}
-
-static void modify_8(unsigned long addr, unsigned long h, unsigned long data)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	ctrl_outb(set_field(ctrl_inb(addr), data, h), addr);
-	local_irq_restore(flags);
-}
-
-static void modify_16(unsigned long addr, unsigned long h, unsigned long data)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	ctrl_outw(set_field(ctrl_inw(addr), data, h), addr);
-	local_irq_restore(flags);
-}
-
-static void modify_32(unsigned long addr, unsigned long h, unsigned long data)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	ctrl_outl(set_field(ctrl_inl(addr), data, h), addr);
-	local_irq_restore(flags);
-}
-
-enum {	REG_FN_ERR = 0, REG_FN_WRITE_BASE = 1, REG_FN_MODIFY_BASE = 5 };
-
-static void (*intc_reg_fns[])(unsigned long addr,
-			      unsigned long h,
-			      unsigned long data) = {
-	[REG_FN_WRITE_BASE + 0] = write_8,
-	[REG_FN_WRITE_BASE + 1] = write_16,
-	[REG_FN_WRITE_BASE + 3] = write_32,
-	[REG_FN_MODIFY_BASE + 0] = modify_8,
-	[REG_FN_MODIFY_BASE + 1] = modify_16,
-	[REG_FN_MODIFY_BASE + 3] = modify_32,
-};
-
-enum {	MODE_ENABLE_REG = 0, /* Bit(s) set -> interrupt enabled */
-	MODE_MASK_REG,       /* Bit(s) set -> interrupt disabled */
-	MODE_DUAL_REG,       /* Two registers, set bit to enable / disable */
-	MODE_PRIO_REG,       /* Priority value written to enable interrupt */
-	MODE_PCLR_REG,       /* Above plus all bits set to disable interrupt */
-};
-
-static void intc_mode_field(unsigned long addr,
-			    unsigned long handle,
-			    void (*fn)(unsigned long,
-				       unsigned long,
-				       unsigned long),
-			    unsigned int irq)
-{
-	fn(addr, handle, ((1 << _INTC_WIDTH(handle)) - 1));
-}
-
-static void intc_mode_zero(unsigned long addr,
-			   unsigned long handle,
-			   void (*fn)(unsigned long,
-				       unsigned long,
-				       unsigned long),
-			   unsigned int irq)
-{
-	fn(addr, handle, 0);
-}
-
-static void intc_mode_prio(unsigned long addr,
-			   unsigned long handle,
-			   void (*fn)(unsigned long,
-				       unsigned long,
-				       unsigned long),
-			   unsigned int irq)
-{
-	fn(addr, handle, intc_prio_level[irq]);
-}
-
-static void (*intc_enable_fns[])(unsigned long addr,
-				 unsigned long handle,
-				 void (*fn)(unsigned long,
-					    unsigned long,
-					    unsigned long),
-				 unsigned int irq) = {
-	[MODE_ENABLE_REG] = intc_mode_field,
-	[MODE_MASK_REG] = intc_mode_zero,
-	[MODE_DUAL_REG] = intc_mode_field,
-	[MODE_PRIO_REG] = intc_mode_prio,
-	[MODE_PCLR_REG] = intc_mode_prio,
-};
-
-static void (*intc_disable_fns[])(unsigned long addr,
-				  unsigned long handle,
-				  void (*fn)(unsigned long,
-					     unsigned long,
-					     unsigned long),
-				  unsigned int irq) = {
-	[MODE_ENABLE_REG] = intc_mode_zero,
-	[MODE_MASK_REG] = intc_mode_field,
-	[MODE_DUAL_REG] = intc_mode_field,
-	[MODE_PRIO_REG] = intc_mode_zero,
-	[MODE_PCLR_REG] = intc_mode_field,
-};
-
-static inline void _intc_enable(unsigned int irq, unsigned long handle)
-{
-	struct intc_desc_int *d = get_intc_desc(irq);
-	unsigned long addr;
-	unsigned int cpu;
-
-	for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) {
-		addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu);
-		intc_enable_fns[_INTC_MODE(handle)](addr, handle, intc_reg_fns\
-						    [_INTC_FN(handle)], irq);
-	}
-}
-
-static void intc_enable(unsigned int irq)
-{
-	_intc_enable(irq, (unsigned long)get_irq_chip_data(irq));
-}
-
-static void intc_disable(unsigned int irq)
-{
-	struct intc_desc_int *d = get_intc_desc(irq);
-	unsigned long handle = (unsigned long) get_irq_chip_data(irq);
-	unsigned long addr;
-	unsigned int cpu;
-
-	for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) {
-		addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu);
-		intc_disable_fns[_INTC_MODE(handle)](addr, handle,intc_reg_fns\
-						     [_INTC_FN(handle)], irq);
-	}
-}
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
-static void intc_mask_ack(unsigned int irq)
-{
-	struct intc_desc_int *d = get_intc_desc(irq);
-	unsigned long handle = ack_handle[irq];
-	unsigned long addr;
-
-	intc_disable(irq);
-
-	/* read register and write zero only to the assocaited bit */
-
-	if (handle) {
-		addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
-		switch (_INTC_FN(handle)) {
-		case REG_FN_MODIFY_BASE + 0:	/* 8bit */
-			ctrl_inb(addr);
-			ctrl_outb(0xff ^ set_field(0, 1, handle), addr);
-			break;
-		case REG_FN_MODIFY_BASE + 1:	/* 16bit */
-			ctrl_inw(addr);
-			ctrl_outw(0xffff ^ set_field(0, 1, handle), addr);
-			break;
-		case REG_FN_MODIFY_BASE + 3:	/* 32bit */
-			ctrl_inl(addr);
-			ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr);
-			break;
-		default:
-			BUG();
-			break;
-		}
-	}
-}
-#endif
-
-static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp,
-					     unsigned int nr_hp,
-					     unsigned int irq)
-{
-	int i;
-
-	/* this doesn't scale well, but...
-	 *
-	 * this function should only be used for cerain uncommon
-	 * operations such as intc_set_priority() and intc_set_sense()
-	 * and in those rare cases performance doesn't matter that much.
-	 * keeping the memory footprint low is more important.
-	 *
-	 * one rather simple way to speed this up and still keep the
-	 * memory footprint down is to make sure the array is sorted
-	 * and then perform a bisect to lookup the irq.
-	 */
-
-	for (i = 0; i < nr_hp; i++) {
-		if ((hp + i)->irq != irq)
-			continue;
-
-		return hp + i;
-	}
-
-	return NULL;
-}
-
-int intc_set_priority(unsigned int irq, unsigned int prio)
-{
-	struct intc_desc_int *d = get_intc_desc(irq);
-	struct intc_handle_int *ihp;
-
-	if (!intc_prio_level[irq] || prio <= 1)
-		return -EINVAL;
-
-	ihp = intc_find_irq(d->prio, d->nr_prio, irq);
-	if (ihp) {
-		if (prio >= (1 << _INTC_WIDTH(ihp->handle)))
-			return -EINVAL;
-
-		intc_prio_level[irq] = prio;
-
-		/*
-		 * only set secondary masking method directly
-		 * primary masking method is using intc_prio_level[irq]
-		 * priority level will be set during next enable()
-		 */
-
-		if (_INTC_FN(ihp->handle) != REG_FN_ERR)
-			_intc_enable(irq, ihp->handle);
-	}
-	return 0;
-}
-
-#define VALID(x) (x | 0x80)
-
-static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = {
-	[IRQ_TYPE_EDGE_FALLING] = VALID(0),
-	[IRQ_TYPE_EDGE_RISING] = VALID(1),
-	[IRQ_TYPE_LEVEL_LOW] = VALID(2),
-	/* SH7706, SH7707 and SH7709 do not support high level triggered */
-#if !defined(CONFIG_CPU_SUBTYPE_SH7706) && \
-    !defined(CONFIG_CPU_SUBTYPE_SH7707) && \
-    !defined(CONFIG_CPU_SUBTYPE_SH7709)
-	[IRQ_TYPE_LEVEL_HIGH] = VALID(3),
-#endif
-};
-
-static int intc_set_sense(unsigned int irq, unsigned int type)
-{
-	struct intc_desc_int *d = get_intc_desc(irq);
-	unsigned char value = intc_irq_sense_table[type & IRQ_TYPE_SENSE_MASK];
-	struct intc_handle_int *ihp;
-	unsigned long addr;
-
-	if (!value)
-		return -EINVAL;
-
-	ihp = intc_find_irq(d->sense, d->nr_sense, irq);
-	if (ihp) {
-		addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0);
-		intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value);
-	}
-	return 0;
-}
-
-static unsigned int __init intc_get_reg(struct intc_desc_int *d,
-				 unsigned long address)
-{
-	unsigned int k;
-
-	for (k = 0; k < d->nr_reg; k++) {
-		if (d->reg[k] == address)
-			return k;
-	}
-
-	BUG();
-	return 0;
-}
-
-static intc_enum __init intc_grp_id(struct intc_desc *desc,
-				    intc_enum enum_id)
-{
-	struct intc_group *g = desc->groups;
-	unsigned int i, j;
-
-	for (i = 0; g && enum_id && i < desc->nr_groups; i++) {
-		g = desc->groups + i;
-
-		for (j = 0; g->enum_ids[j]; j++) {
-			if (g->enum_ids[j] != enum_id)
-				continue;
-
-			return g->enum_id;
-		}
-	}
-
-	return 0;
-}
-
-static unsigned int __init intc_mask_data(struct intc_desc *desc,
-					  struct intc_desc_int *d,
-					  intc_enum enum_id, int do_grps)
-{
-	struct intc_mask_reg *mr = desc->mask_regs;
-	unsigned int i, j, fn, mode;
-	unsigned long reg_e, reg_d;
-
-	for (i = 0; mr && enum_id && i < desc->nr_mask_regs; i++) {
-		mr = desc->mask_regs + i;
-
-		for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
-			if (mr->enum_ids[j] != enum_id)
-				continue;
-
-			if (mr->set_reg && mr->clr_reg) {
-				fn = REG_FN_WRITE_BASE;
-				mode = MODE_DUAL_REG;
-				reg_e = mr->clr_reg;
-				reg_d = mr->set_reg;
-			} else {
-				fn = REG_FN_MODIFY_BASE;
-				if (mr->set_reg) {
-					mode = MODE_ENABLE_REG;
-					reg_e = mr->set_reg;
-					reg_d = mr->set_reg;
-				} else {
-					mode = MODE_MASK_REG;
-					reg_e = mr->clr_reg;
-					reg_d = mr->clr_reg;
-				}
-			}
-
-			fn += (mr->reg_width >> 3) - 1;
-			return _INTC_MK(fn, mode,
-					intc_get_reg(d, reg_e),
-					intc_get_reg(d, reg_d),
-					1,
-					(mr->reg_width - 1) - j);
-		}
-	}
-
-	if (do_grps)
-		return intc_mask_data(desc, d, intc_grp_id(desc, enum_id), 0);
-
-	return 0;
-}
-
-static unsigned int __init intc_prio_data(struct intc_desc *desc,
-					  struct intc_desc_int *d,
-					  intc_enum enum_id, int do_grps)
-{
-	struct intc_prio_reg *pr = desc->prio_regs;
-	unsigned int i, j, fn, mode, bit;
-	unsigned long reg_e, reg_d;
-
-	for (i = 0; pr && enum_id && i < desc->nr_prio_regs; i++) {
-		pr = desc->prio_regs + i;
-
-		for (j = 0; j < ARRAY_SIZE(pr->enum_ids); j++) {
-			if (pr->enum_ids[j] != enum_id)
-				continue;
-
-			if (pr->set_reg && pr->clr_reg) {
-				fn = REG_FN_WRITE_BASE;
-				mode = MODE_PCLR_REG;
-				reg_e = pr->set_reg;
-				reg_d = pr->clr_reg;
-			} else {
-				fn = REG_FN_MODIFY_BASE;
-				mode = MODE_PRIO_REG;
-				if (!pr->set_reg)
-					BUG();
-				reg_e = pr->set_reg;
-				reg_d = pr->set_reg;
-			}
-
-			fn += (pr->reg_width >> 3) - 1;
-			bit = pr->reg_width - ((j + 1) * pr->field_width);
-
-			BUG_ON(bit < 0);
-
-			return _INTC_MK(fn, mode,
-					intc_get_reg(d, reg_e),
-					intc_get_reg(d, reg_d),
-					pr->field_width, bit);
-		}
-	}
-
-	if (do_grps)
-		return intc_prio_data(desc, d, intc_grp_id(desc, enum_id), 0);
-
-	return 0;
-}
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
-static unsigned int __init intc_ack_data(struct intc_desc *desc,
-					  struct intc_desc_int *d,
-					  intc_enum enum_id)
-{
-	struct intc_mask_reg *mr = desc->ack_regs;
-	unsigned int i, j, fn, mode;
-	unsigned long reg_e, reg_d;
-
-	for (i = 0; mr && enum_id && i < desc->nr_ack_regs; i++) {
-		mr = desc->ack_regs + i;
-
-		for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
-			if (mr->enum_ids[j] != enum_id)
-				continue;
-
-			fn = REG_FN_MODIFY_BASE;
-			mode = MODE_ENABLE_REG;
-			reg_e = mr->set_reg;
-			reg_d = mr->set_reg;
-
-			fn += (mr->reg_width >> 3) - 1;
-			return _INTC_MK(fn, mode,
-					intc_get_reg(d, reg_e),
-					intc_get_reg(d, reg_d),
-					1,
-					(mr->reg_width - 1) - j);
-		}
-	}
-
-	return 0;
-}
-#endif
-
-static unsigned int __init intc_sense_data(struct intc_desc *desc,
-					   struct intc_desc_int *d,
-					   intc_enum enum_id)
-{
-	struct intc_sense_reg *sr = desc->sense_regs;
-	unsigned int i, j, fn, bit;
-
-	for (i = 0; sr && enum_id && i < desc->nr_sense_regs; i++) {
-		sr = desc->sense_regs + i;
-
-		for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) {
-			if (sr->enum_ids[j] != enum_id)
-				continue;
-
-			fn = REG_FN_MODIFY_BASE;
-			fn += (sr->reg_width >> 3) - 1;
-			bit = sr->reg_width - ((j + 1) * sr->field_width);
-
-			BUG_ON(bit < 0);
-
-			return _INTC_MK(fn, 0, intc_get_reg(d, sr->reg),
-					0, sr->field_width, bit);
-		}
-	}
-
-	return 0;
-}
-
-static void __init intc_register_irq(struct intc_desc *desc,
-				     struct intc_desc_int *d,
-				     intc_enum enum_id,
-				     unsigned int irq)
-{
-	struct intc_handle_int *hp;
-	unsigned int data[2], primary;
-
-	/* Prefer single interrupt source bitmap over other combinations:
-	 * 1. bitmap, single interrupt source
-	 * 2. priority, single interrupt source
-	 * 3. bitmap, multiple interrupt sources (groups)
-	 * 4. priority, multiple interrupt sources (groups)
-	 */
-
-	data[0] = intc_mask_data(desc, d, enum_id, 0);
-	data[1] = intc_prio_data(desc, d, enum_id, 0);
-
-	primary = 0;
-	if (!data[0] && data[1])
-		primary = 1;
-
-	data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1);
-	data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1);
-
-	if (!data[primary])
-		primary ^= 1;
-
-	BUG_ON(!data[primary]); /* must have primary masking method */
-
-	disable_irq_nosync(irq);
-	set_irq_chip_and_handler_name(irq, &d->chip,
-				      handle_level_irq, "level");
-	set_irq_chip_data(irq, (void *)data[primary]);
-
-	/* set priority level
-	 * - this needs to be at least 2 for 5-bit priorities on 7780
-	 */
-	intc_prio_level[irq] = 2;
-
-	/* enable secondary masking method if present */
-	if (data[!primary])
-		_intc_enable(irq, data[!primary]);
-
-	/* add irq to d->prio list if priority is available */
-	if (data[1]) {
-		hp = d->prio + d->nr_prio;
-		hp->irq = irq;
-		hp->handle = data[1];
-
-		if (primary) {
-			/*
-			 * only secondary priority should access registers, so
-			 * set _INTC_FN(h) = REG_FN_ERR for intc_set_priority()
-			 */
-
-			hp->handle &= ~_INTC_MK(0x0f, 0, 0, 0, 0, 0);
-			hp->handle |= _INTC_MK(REG_FN_ERR, 0, 0, 0, 0, 0);
-		}
-		d->nr_prio++;
-	}
-
-	/* add irq to d->sense list if sense is available */
-	data[0] = intc_sense_data(desc, d, enum_id);
-	if (data[0]) {
-		(d->sense + d->nr_sense)->irq = irq;
-		(d->sense + d->nr_sense)->handle = data[0];
-		d->nr_sense++;
-	}
-
-	/* irq should be disabled by default */
-	d->chip.mask(irq);
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
-	if (desc->ack_regs)
-		ack_handle[irq] = intc_ack_data(desc, d, enum_id);
-#endif
-}
-
-static unsigned int __init save_reg(struct intc_desc_int *d,
-				    unsigned int cnt,
-				    unsigned long value,
-				    unsigned int smp)
-{
-	if (value) {
-		d->reg[cnt] = value;
-#ifdef CONFIG_SMP
-		d->smp[cnt] = smp;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-
-void __init register_intc_controller(struct intc_desc *desc)
-{
-	unsigned int i, k, smp;
-	struct intc_desc_int *d;
-
-	d = alloc_bootmem(sizeof(*d));
-
-	d->nr_reg = desc->mask_regs ? desc->nr_mask_regs * 2 : 0;
-	d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
-	d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
-	d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
-#endif
-	d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
-#ifdef CONFIG_SMP
-	d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp));
-#endif
-	k = 0;
-
-	if (desc->mask_regs) {
-		for (i = 0; i < desc->nr_mask_regs; i++) {
-			smp = IS_SMP(desc->mask_regs[i]);
-			k += save_reg(d, k, desc->mask_regs[i].set_reg, smp);
-			k += save_reg(d, k, desc->mask_regs[i].clr_reg, smp);
-		}
-	}
-
-	if (desc->prio_regs) {
-		d->prio = alloc_bootmem(desc->nr_vectors * sizeof(*d->prio));
-
-		for (i = 0; i < desc->nr_prio_regs; i++) {
-			smp = IS_SMP(desc->prio_regs[i]);
-			k += save_reg(d, k, desc->prio_regs[i].set_reg, smp);
-			k += save_reg(d, k, desc->prio_regs[i].clr_reg, smp);
-		}
-	}
-
-	if (desc->sense_regs) {
-		d->sense = alloc_bootmem(desc->nr_vectors * sizeof(*d->sense));
-
-		for (i = 0; i < desc->nr_sense_regs; i++) {
-			k += save_reg(d, k, desc->sense_regs[i].reg, 0);
-		}
-	}
-
-	d->chip.name = desc->name;
-	d->chip.mask = intc_disable;
-	d->chip.unmask = intc_enable;
-	d->chip.mask_ack = intc_disable;
-	d->chip.set_type = intc_set_sense;
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
-	if (desc->ack_regs) {
-		for (i = 0; i < desc->nr_ack_regs; i++)
-			k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
-
-		d->chip.mask_ack = intc_mask_ack;
-	}
-#endif
-
-	BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
-
-	for (i = 0; i < desc->nr_vectors; i++) {
-		struct intc_vect *vect = desc->vectors + i;
-
-		intc_register_irq(desc, d, vect->enum_id, evt2irq(vect->vect));
-	}
-}
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 56ea7b2..3eb17ee 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -33,7 +33,7 @@ static void disable_ipr_irq(unsigned int irq)
 	struct ipr_data *p = get_irq_chip_data(irq);
 	unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx];
 	/* Set the priority in IPR to 0 */
-	ctrl_outw(ctrl_inw(addr) & (0xffff ^ (0xf << p->shift)), addr);
+	__raw_writew(__raw_readw(addr) & (0xffff ^ (0xf << p->shift)), addr);
 }
 
 static void enable_ipr_irq(unsigned int irq)
@@ -41,7 +41,7 @@ static void enable_ipr_irq(unsigned int irq)
 	struct ipr_data *p = get_irq_chip_data(irq);
 	unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx];
 	/* Set priority in IPR back to original value */
-	ctrl_outw(ctrl_inw(addr) | (p->priority << p->shift), addr);
+	__raw_writew(__raw_readw(addr) | (p->priority << p->shift), addr);
 }
 
 /*
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
index 1ab1ecf..428450c 100644
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -12,3 +12,8 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7206)	+= setup-sh7206.o clock-sh7206.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7203)	+= setup-sh7203.o clock-sh7203.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7263)	+= setup-sh7203.o clock-sh7203.o
 obj-$(CONFIG_CPU_SUBTYPE_MXG)		+= setup-mxg.o clock-sh7206.o
+
+# Pinmux setup
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7203)	:= pinmux-sh7203.o
+
+obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
new file mode 100644
index 0000000..c465af7
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
@@ -0,0 +1,1597 @@
+/*
+ * SH7203 Pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7203.h>
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
+	PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
+	PB12_DATA,
+	PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
+	PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
+	PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
+	PC14_DATA, PC13_DATA, PC12_DATA,
+	PC11_DATA, PC10_DATA, PC9_DATA, PC8_DATA,
+	PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
+	PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
+	PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
+	PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
+	PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
+	PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
+	PE15_DATA, PE14_DATA, PE13_DATA, PE12_DATA,
+	PE11_DATA, PE10_DATA, PE9_DATA, PE8_DATA,
+	PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
+	PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
+	PF30_DATA, PF29_DATA, PF28_DATA,
+	PF27_DATA, PF26_DATA, PF25_DATA, PF24_DATA,
+	PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
+	PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA,
+	PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
+	PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
+	PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
+	PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	FORCE_IN,
+	PA7_IN, PA6_IN, PA5_IN, PA4_IN,
+	PA3_IN, PA2_IN, PA1_IN, PA0_IN,
+	PB11_IN, PB10_IN, PB9_IN, PB8_IN,
+	PC14_IN, PC13_IN, PC12_IN,
+	PC11_IN, PC10_IN, PC9_IN, PC8_IN,
+	PC7_IN, PC6_IN, PC5_IN, PC4_IN,
+	PC3_IN, PC2_IN, PC1_IN, PC0_IN,
+	PD15_IN, PD14_IN, PD13_IN, PD12_IN,
+	PD11_IN, PD10_IN, PD9_IN, PD8_IN,
+	PD7_IN, PD6_IN, PD5_IN, PD4_IN,
+	PD3_IN, PD2_IN, PD1_IN, PD0_IN,
+	PE15_IN, PE14_IN, PE13_IN, PE12_IN,
+	PE11_IN, PE10_IN, PE9_IN, PE8_IN,
+	PE7_IN, PE6_IN, PE5_IN, PE4_IN,
+	PE3_IN, PE2_IN, PE1_IN, PE0_IN,
+	PF30_IN, PF29_IN, PF28_IN,
+	PF27_IN, PF26_IN, PF25_IN, PF24_IN,
+	PF23_IN, PF22_IN, PF21_IN, PF20_IN,
+	PF19_IN, PF18_IN, PF17_IN, PF16_IN,
+	PF15_IN, PF14_IN, PF13_IN, PF12_IN,
+	PF11_IN, PF10_IN, PF9_IN, PF8_IN,
+	PF7_IN, PF6_IN, PF5_IN, PF4_IN,
+	PF3_IN, PF2_IN, PF1_IN, PF0_IN,
+	PINMUX_INPUT_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	FORCE_OUT,
+	PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
+	PC14_OUT, PC13_OUT, PC12_OUT,
+	PC11_OUT, PC10_OUT, PC9_OUT, PC8_OUT,
+	PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
+	PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
+	PD15_OUT, PD14_OUT, PD13_OUT, PD12_OUT,
+	PD11_OUT, PD10_OUT, PD9_OUT, PD8_OUT,
+	PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
+	PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
+	PE15_OUT, PE14_OUT, PE13_OUT, PE12_OUT,
+	PE11_OUT, PE10_OUT, PE9_OUT, PE8_OUT,
+	PE7_OUT, PE6_OUT, PE5_OUT, PE4_OUT,
+	PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
+	PF30_OUT, PF29_OUT, PF28_OUT,
+	PF27_OUT, PF26_OUT, PF25_OUT, PF24_OUT,
+	PF23_OUT, PF22_OUT, PF21_OUT, PF20_OUT,
+	PF19_OUT, PF18_OUT, PF17_OUT, PF16_OUT,
+	PF15_OUT, PF14_OUT, PF13_OUT, PF12_OUT,
+	PF11_OUT, PF10_OUT, PF9_OUT, PF8_OUT,
+	PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
+	PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PB11_IOR_IN, PB11_IOR_OUT,
+	PB10_IOR_IN, PB10_IOR_OUT,
+	PB9_IOR_IN, PB9_IOR_OUT,
+	PB8_IOR_IN, PB8_IOR_OUT,
+	PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
+	PB11MD_0, PB11MD_1,
+	PB10MD_0, PB10MD_1,
+	PB9MD_00, PB9MD_01, PB9MD_10,
+	PB8MD_00, PB8MD_01, PB8MD_10,
+	PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
+	PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
+	PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
+	PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
+	PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
+	PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
+	PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
+	PB0MD_00, PB0MD_01, PB0MD_10, PB0MD_11,
+
+	PB12IRQ_00, PB12IRQ_01, PB12IRQ_10,
+
+	PC14MD_0, PC14MD_1,
+	PC13MD_0, PC13MD_1,
+	PC12MD_0, PC12MD_1,
+	PC11MD_00, PC11MD_01, PC11MD_10,
+	PC10MD_00, PC10MD_01, PC10MD_10,
+	PC9MD_0, PC9MD_1,
+	PC8MD_0, PC8MD_1,
+	PC7MD_0, PC7MD_1,
+	PC6MD_0, PC6MD_1,
+	PC5MD_0, PC5MD_1,
+	PC4MD_0, PC4MD_1,
+	PC3MD_0, PC3MD_1,
+	PC2MD_0, PC2MD_1,
+	PC1MD_0, PC1MD_1,
+	PC0MD_00, PC0MD_01, PC0MD_10,
+
+	PD15MD_000, PD15MD_001, PD15MD_010, PD15MD_100, PD15MD_101,
+	PD14MD_000, PD14MD_001, PD14MD_010, PD14MD_101,
+	PD13MD_000, PD13MD_001, PD13MD_010, PD13MD_100, PD13MD_101,
+	PD12MD_000, PD12MD_001, PD12MD_010, PD12MD_100, PD12MD_101,
+	PD11MD_000, PD11MD_001, PD11MD_010, PD11MD_100, PD11MD_101,
+	PD10MD_000, PD10MD_001, PD10MD_010, PD10MD_100, PD10MD_101,
+	PD9MD_000, PD9MD_001, PD9MD_010, PD9MD_100, PD9MD_101,
+	PD8MD_000, PD8MD_001, PD8MD_010, PD8MD_100, PD8MD_101,
+	PD7MD_000, PD7MD_001, PD7MD_010, PD7MD_011, PD7MD_100, PD7MD_101,
+	PD6MD_000, PD6MD_001, PD6MD_010, PD6MD_011, PD6MD_100, PD6MD_101,
+	PD5MD_000, PD5MD_001, PD5MD_010, PD5MD_011, PD5MD_100, PD5MD_101,
+	PD4MD_000, PD4MD_001, PD4MD_010, PD4MD_011, PD4MD_100, PD4MD_101,
+	PD3MD_000, PD3MD_001, PD3MD_010, PD3MD_011, PD3MD_100, PD3MD_101,
+	PD2MD_000, PD2MD_001, PD2MD_010, PD2MD_011, PD2MD_100, PD2MD_101,
+	PD1MD_000, PD1MD_001, PD1MD_010, PD1MD_011, PD1MD_100, PD1MD_101,
+	PD0MD_000, PD0MD_001, PD0MD_010, PD0MD_011, PD0MD_100, PD0MD_101,
+
+	PE15MD_00, PE15MD_01, PE15MD_11,
+	PE14MD_00, PE14MD_01, PE14MD_11,
+	PE13MD_00, PE13MD_11,
+	PE12MD_00, PE12MD_11,
+	PE11MD_000, PE11MD_001, PE11MD_010, PE11MD_100,
+	PE10MD_000, PE10MD_001, PE10MD_010, PE10MD_100,
+	PE9MD_00, PE9MD_01, PE9MD_10, PE9MD_11,
+	PE8MD_00, PE8MD_01, PE8MD_10, PE8MD_11,
+	PE7MD_000, PE7MD_001, PE7MD_010, PE7MD_011, PE7MD_100,
+	PE6MD_000, PE6MD_001, PE6MD_010, PE6MD_011, PE6MD_100,
+	PE5MD_000, PE5MD_001, PE5MD_010, PE5MD_011, PE5MD_100,
+	PE4MD_000, PE4MD_001, PE4MD_010, PE4MD_011, PE4MD_100,
+	PE3MD_00, PE3MD_01, PE3MD_11,
+	PE2MD_00, PE2MD_01, PE2MD_11,
+	PE1MD_00, PE1MD_01, PE1MD_10, PE1MD_11,
+	PE0MD_000, PE0MD_001, PE0MD_011, PE0MD_100,
+
+	PF30MD_0, PF30MD_1,
+	PF29MD_0, PF29MD_1,
+	PF28MD_0, PF28MD_1,
+	PF27MD_0, PF27MD_1,
+	PF26MD_0, PF26MD_1,
+	PF25MD_0, PF25MD_1,
+	PF24MD_0, PF24MD_1,
+	PF23MD_00, PF23MD_01, PF23MD_10,
+	PF22MD_00, PF22MD_01, PF22MD_10,
+	PF21MD_00, PF21MD_01, PF21MD_10,
+	PF20MD_00, PF20MD_01, PF20MD_10,
+	PF19MD_00, PF19MD_01, PF19MD_10,
+	PF18MD_00, PF18MD_01, PF18MD_10,
+	PF17MD_00, PF17MD_01, PF17MD_10,
+	PF16MD_00, PF16MD_01, PF16MD_10,
+	PF15MD_00, PF15MD_01, PF15MD_10,
+	PF14MD_00, PF14MD_01, PF14MD_10,
+	PF13MD_00, PF13MD_01, PF13MD_10,
+	PF12MD_00, PF12MD_01, PF12MD_10,
+	PF11MD_00, PF11MD_01, PF11MD_10,
+	PF10MD_00, PF10MD_01, PF10MD_10,
+	PF9MD_00, PF9MD_01, PF9MD_10,
+	PF8MD_00, PF8MD_01, PF8MD_10,
+	PF7MD_00, PF7MD_01, PF7MD_10, PF7MD_11,
+	PF6MD_00, PF6MD_01, PF6MD_10, PF6MD_11,
+	PF5MD_00, PF5MD_01, PF5MD_10, PF5MD_11,
+	PF4MD_00, PF4MD_01, PF4MD_10, PF4MD_11,
+	PF3MD_00, PF3MD_01, PF3MD_10, PF3MD_11,
+	PF2MD_00, PF2MD_01, PF2MD_10, PF2MD_11,
+	PF1MD_00, PF1MD_01, PF1MD_10, PF1MD_11,
+	PF0MD_00, PF0MD_01, PF0MD_10, PF0MD_11,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	PINT7_PB_MARK, PINT6_PB_MARK, PINT5_PB_MARK, PINT4_PB_MARK,
+	PINT3_PB_MARK, PINT2_PB_MARK, PINT1_PB_MARK, PINT0_PB_MARK,
+	PINT7_PD_MARK, PINT6_PD_MARK, PINT5_PD_MARK, PINT4_PD_MARK,
+	PINT3_PD_MARK, PINT2_PD_MARK, PINT1_PD_MARK, PINT0_PD_MARK,
+	IRQ7_PB_MARK, IRQ6_PB_MARK, IRQ5_PB_MARK, IRQ4_PB_MARK,
+	IRQ3_PB_MARK, IRQ2_PB_MARK, IRQ1_PB_MARK, IRQ0_PB_MARK,
+	IRQ7_PD_MARK, IRQ6_PD_MARK, IRQ5_PD_MARK, IRQ4_PD_MARK,
+	IRQ3_PD_MARK, IRQ2_PD_MARK, IRQ1_PD_MARK, IRQ0_PD_MARK,
+	IRQ7_PE_MARK, IRQ6_PE_MARK, IRQ5_PE_MARK, IRQ4_PE_MARK,
+	IRQ3_PE_MARK, IRQ2_PE_MARK, IRQ1_PE_MARK, IRQ0_PE_MARK,
+	WDTOVF_MARK, IRQOUT_MARK, REFOUT_MARK, IRQOUT_REFOUT_MARK,
+	UBCTRG_MARK,
+	CTX1_MARK, CRX1_MARK, CTX0_MARK, CTX0_CTX1_MARK,
+	CRX0_MARK, CRX0_CRX1_MARK,
+	SDA3_MARK, SCL3_MARK,
+	SDA2_MARK, SCL2_MARK,
+	SDA1_MARK, SCL1_MARK,
+	SDA0_MARK, SCL0_MARK,
+	TEND0_PD_MARK, TEND0_PE_MARK, DACK0_PD_MARK, DACK0_PE_MARK,
+	DREQ0_PD_MARK, DREQ0_PE_MARK, TEND1_PD_MARK, TEND1_PE_MARK,
+	DACK1_PD_MARK, DACK1_PE_MARK, DREQ1_PD_MARK, DREQ1_PE_MARK,
+	DACK2_MARK, DREQ2_MARK, DACK3_MARK, DREQ3_MARK,
+	ADTRG_PD_MARK, ADTRG_PE_MARK,
+	D31_MARK, D30_MARK, D29_MARK, D28_MARK,
+	D27_MARK, D26_MARK, D25_MARK, D24_MARK,
+	D23_MARK, D22_MARK, D21_MARK, D20_MARK,
+	D19_MARK, D18_MARK, D17_MARK, D16_MARK,
+	A25_MARK, A24_MARK, A23_MARK, A22_MARK,
+	A21_MARK, CS4_MARK, MRES_MARK, BS_MARK,
+	IOIS16_MARK, CS1_MARK, CS6_CE1B_MARK, CE2B_MARK,
+	CS5_CE1A_MARK, CE2A_MARK, FRAME_MARK, WAIT_MARK,
+	RDWR_MARK, CKE_MARK, CASU_MARK,	BREQ_MARK,
+	RASU_MARK, BACK_MARK, CASL_MARK, RASL_MARK,
+	WE3_DQMUU_AH_ICIO_WR_MARK, WE2_DQMUL_ICIORD_MARK,
+	WE1_DQMLU_WE_MARK, WE0_DQMLL_MARK,
+	CS3_MARK, CS2_MARK, A1_MARK, A0_MARK, CS7_MARK,
+	TIOC4D_MARK, TIOC4C_MARK, TIOC4B_MARK, TIOC4A_MARK,
+	TIOC3D_MARK, TIOC3C_MARK, TIOC3B_MARK, TIOC3A_MARK,
+	TIOC2B_MARK, TIOC1B_MARK, TIOC2A_MARK, TIOC1A_MARK,
+	TIOC0D_MARK, TIOC0C_MARK, TIOC0B_MARK, TIOC0A_MARK,
+	TCLKD_PD_MARK, TCLKC_PD_MARK, TCLKB_PD_MARK, TCLKA_PD_MARK,
+	TCLKD_PF_MARK, TCLKC_PF_MARK, TCLKB_PF_MARK, TCLKA_PF_MARK,
+	SCS0_PD_MARK, SSO0_PD_MARK, SSI0_PD_MARK, SSCK0_PD_MARK,
+	SCS0_PF_MARK, SSO0_PF_MARK, SSI0_PF_MARK, SSCK0_PF_MARK,
+	SCS1_PD_MARK, SSO1_PD_MARK, SSI1_PD_MARK, SSCK1_PD_MARK,
+	SCS1_PF_MARK, SSO1_PF_MARK, SSI1_PF_MARK, SSCK1_PF_MARK,
+	TXD0_MARK, RXD0_MARK, SCK0_MARK,
+	TXD1_MARK, RXD1_MARK, SCK1_MARK,
+	TXD2_MARK, RXD2_MARK, SCK2_MARK,
+	RTS3_MARK, CTS3_MARK, TXD3_MARK,
+	RXD3_MARK, SCK3_MARK,
+	AUDIO_CLK_MARK,
+	SSIDATA3_MARK, SSIWS3_MARK, SSISCK3_MARK,
+	SSIDATA2_MARK, SSIWS2_MARK, SSISCK2_MARK,
+	SSIDATA1_MARK, SSIWS1_MARK, SSISCK1_MARK,
+	SSIDATA0_MARK, SSIWS0_MARK, SSISCK0_MARK,
+	FCE_MARK, FRB_MARK,
+	NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
+	NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK,
+	FSC_MARK, FOE_MARK, FCDE_MARK, FWE_MARK,
+	LCD_VEPWC_MARK, LCD_VCPWC_MARK,	LCD_CLK_MARK, LCD_FLM_MARK,
+	LCD_M_DISP_MARK, LCD_CL2_MARK, LCD_CL1_MARK, LCD_DON_MARK,
+	LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK,
+	LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK,
+	LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK,
+	LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK,
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+
+	/* PA */
+	PINMUX_DATA(PA7_DATA, PA7_IN),
+	PINMUX_DATA(PA6_DATA, PA6_IN),
+	PINMUX_DATA(PA5_DATA, PA5_IN),
+	PINMUX_DATA(PA4_DATA, PA4_IN),
+	PINMUX_DATA(PA3_DATA, PA3_IN),
+	PINMUX_DATA(PA2_DATA, PA2_IN),
+	PINMUX_DATA(PA1_DATA, PA1_IN),
+	PINMUX_DATA(PA0_DATA, PA0_IN),
+
+	/* PB */
+	PINMUX_DATA(PB12_DATA, PB12MD_00, FORCE_OUT),
+	PINMUX_DATA(WDTOVF_MARK, PB12MD_01),
+	PINMUX_DATA(IRQOUT_MARK, PB12MD_10, PB12IRQ_00),
+	PINMUX_DATA(REFOUT_MARK, PB12MD_10, PB12IRQ_01),
+	PINMUX_DATA(IRQOUT_REFOUT_MARK, PB12MD_10, PB12IRQ_10),
+	PINMUX_DATA(UBCTRG_MARK, PB12MD_11),
+
+	PINMUX_DATA(PB11_DATA, PB11MD_0, PB11_IN, PB11_OUT),
+	PINMUX_DATA(CTX1_MARK, PB11MD_1),
+
+	PINMUX_DATA(PB10_DATA, PB10MD_0, PB10_IN, PB10_OUT),
+	PINMUX_DATA(CRX1_MARK, PB10MD_1),
+
+	PINMUX_DATA(PB9_DATA, PB9MD_00, PB9_IN, PB9_OUT),
+	PINMUX_DATA(CTX0_MARK, PB9MD_01),
+	PINMUX_DATA(CTX0_CTX1_MARK, PB9MD_10),
+
+	PINMUX_DATA(PB8_DATA, PB8MD_00, PB8_IN, PB8_OUT),
+	PINMUX_DATA(CRX0_MARK, PB8MD_01),
+	PINMUX_DATA(CRX0_CRX1_MARK, PB8MD_10),
+
+	PINMUX_DATA(PB7_DATA, PB7MD_00, FORCE_IN),
+	PINMUX_DATA(SDA3_MARK, PB7MD_01),
+	PINMUX_DATA(PINT7_PB_MARK, PB7MD_10),
+	PINMUX_DATA(IRQ7_PB_MARK, PB7MD_11),
+
+	PINMUX_DATA(PB6_DATA, PB6MD_00, FORCE_IN),
+	PINMUX_DATA(SCL3_MARK, PB6MD_01),
+	PINMUX_DATA(PINT6_PB_MARK, PB6MD_10),
+	PINMUX_DATA(IRQ6_PB_MARK, PB6MD_11),
+
+	PINMUX_DATA(PB5_DATA, PB5MD_00, FORCE_IN),
+	PINMUX_DATA(SDA2_MARK, PB6MD_01),
+	PINMUX_DATA(PINT5_PB_MARK, PB6MD_10),
+	PINMUX_DATA(IRQ5_PB_MARK, PB6MD_11),
+
+	PINMUX_DATA(PB4_DATA, PB4MD_00, FORCE_IN),
+	PINMUX_DATA(SCL2_MARK, PB4MD_01),
+	PINMUX_DATA(PINT4_PB_MARK, PB4MD_10),
+	PINMUX_DATA(IRQ4_PB_MARK, PB4MD_11),
+
+	PINMUX_DATA(PB3_DATA, PB3MD_00, FORCE_IN),
+	PINMUX_DATA(SDA1_MARK, PB3MD_01),
+	PINMUX_DATA(PINT3_PB_MARK, PB3MD_10),
+	PINMUX_DATA(IRQ3_PB_MARK, PB3MD_11),
+
+	PINMUX_DATA(PB2_DATA, PB2MD_00, FORCE_IN),
+	PINMUX_DATA(SCL1_MARK, PB2MD_01),
+	PINMUX_DATA(PINT2_PB_MARK, PB2MD_10),
+	PINMUX_DATA(IRQ2_PB_MARK, PB2MD_11),
+
+	PINMUX_DATA(PB1_DATA, PB1MD_00, FORCE_IN),
+	PINMUX_DATA(SDA0_MARK, PB1MD_01),
+	PINMUX_DATA(PINT1_PB_MARK, PB1MD_10),
+	PINMUX_DATA(IRQ1_PB_MARK, PB1MD_11),
+
+	PINMUX_DATA(PB0_DATA, PB0MD_00, FORCE_IN),
+	PINMUX_DATA(SCL0_MARK, PB0MD_01),
+	PINMUX_DATA(PINT0_PB_MARK, PB0MD_10),
+	PINMUX_DATA(IRQ0_PB_MARK, PB0MD_11),
+
+	/* PC */
+	PINMUX_DATA(PC14_DATA, PC14MD_0, PC14_IN, PC14_OUT),
+	PINMUX_DATA(WAIT_MARK, PC14MD_1),
+
+	PINMUX_DATA(PC13_DATA, PC13MD_0, PC13_IN, PC13_OUT),
+	PINMUX_DATA(RDWR_MARK, PC13MD_1),
+
+	PINMUX_DATA(PC12_DATA, PC12MD_0, PC12_IN, PC12_OUT),
+	PINMUX_DATA(CKE_MARK, PC12MD_1),
+
+	PINMUX_DATA(PC11_DATA, PC11MD_00, PC11_IN, PC11_OUT),
+	PINMUX_DATA(CASU_MARK, PC11MD_01),
+	PINMUX_DATA(BREQ_MARK, PC11MD_10),
+
+	PINMUX_DATA(PC10_DATA, PC10MD_00, PC10_IN, PC10_OUT),
+	PINMUX_DATA(RASU_MARK, PC10MD_01),
+	PINMUX_DATA(BACK_MARK, PC10MD_10),
+
+	PINMUX_DATA(PC9_DATA, PC9MD_0, PC9_IN, PC9_OUT),
+	PINMUX_DATA(CASL_MARK, PC9MD_1),
+
+	PINMUX_DATA(PC8_DATA, PC8MD_0, PC8_IN, PC8_OUT),
+	PINMUX_DATA(RASL_MARK, PC8MD_1),
+
+	PINMUX_DATA(PC7_DATA, PC7MD_0, PC7_IN, PC7_OUT),
+	PINMUX_DATA(WE3_DQMUU_AH_ICIO_WR_MARK, PC7MD_1),
+
+	PINMUX_DATA(PC6_DATA, PC6MD_0, PC6_IN, PC6_OUT),
+	PINMUX_DATA(WE2_DQMUL_ICIORD_MARK, PC6MD_1),
+
+	PINMUX_DATA(PC5_DATA, PC5MD_0, PC5_IN, PC5_OUT),
+	PINMUX_DATA(WE1_DQMLU_WE_MARK, PC5MD_1),
+
+	PINMUX_DATA(PC4_DATA, PC4MD_0, PC4_IN, PC4_OUT),
+	PINMUX_DATA(WE0_DQMLL_MARK, PC4MD_1),
+
+	PINMUX_DATA(PC3_DATA, PC3MD_0, PC3_IN, PC3_OUT),
+	PINMUX_DATA(CS3_MARK, PC3MD_1),
+
+	PINMUX_DATA(PC2_DATA, PC2MD_0, PC2_IN, PC2_OUT),
+	PINMUX_DATA(CS2_MARK, PC2MD_1),
+
+	PINMUX_DATA(PC1_DATA, PC1MD_0, PC1_IN, PC1_OUT),
+	PINMUX_DATA(A1_MARK, PC1MD_1),
+
+	PINMUX_DATA(PC0_DATA, PC0MD_00, PC0_IN, PC0_OUT),
+	PINMUX_DATA(A0_MARK, PC0MD_01),
+	PINMUX_DATA(CS7_MARK, PC0MD_10),
+
+	/* PD */
+	PINMUX_DATA(PD15_DATA, PD15MD_000, PD15_IN, PD15_OUT),
+	PINMUX_DATA(D31_MARK, PD15MD_001),
+	PINMUX_DATA(PINT7_PD_MARK, PD15MD_010),
+	PINMUX_DATA(ADTRG_PD_MARK, PD15MD_100),
+	PINMUX_DATA(TIOC4D_MARK, PD15MD_101),
+
+	PINMUX_DATA(PD14_DATA, PD14MD_000, PD14_IN, PD14_OUT),
+	PINMUX_DATA(D30_MARK, PD14MD_001),
+	PINMUX_DATA(PINT6_PD_MARK, PD14MD_010),
+	PINMUX_DATA(TIOC4C_MARK, PD14MD_101),
+
+	PINMUX_DATA(PD13_DATA, PD13MD_000, PD13_IN, PD13_OUT),
+	PINMUX_DATA(D29_MARK, PD13MD_001),
+	PINMUX_DATA(PINT5_PD_MARK, PD13MD_010),
+	PINMUX_DATA(TEND1_PD_MARK, PD13MD_100),
+	PINMUX_DATA(TIOC4B_MARK, PD13MD_101),
+
+	PINMUX_DATA(PD12_DATA, PD12MD_000, PD12_IN, PD12_OUT),
+	PINMUX_DATA(D28_MARK, PD12MD_001),
+	PINMUX_DATA(PINT4_PD_MARK, PD12MD_010),
+	PINMUX_DATA(DACK1_PD_MARK, PD12MD_100),
+	PINMUX_DATA(TIOC4A_MARK, PD12MD_101),
+
+	PINMUX_DATA(PD11_DATA, PD11MD_000, PD11_IN, PD11_OUT),
+	PINMUX_DATA(D27_MARK, PD11MD_001),
+	PINMUX_DATA(PINT3_PD_MARK, PD11MD_010),
+	PINMUX_DATA(DREQ1_PD_MARK, PD11MD_100),
+	PINMUX_DATA(TIOC3D_MARK, PD11MD_101),
+
+	PINMUX_DATA(PD10_DATA, PD10MD_000, PD10_IN, PD10_OUT),
+	PINMUX_DATA(D26_MARK, PD10MD_001),
+	PINMUX_DATA(PINT2_PD_MARK, PD10MD_010),
+	PINMUX_DATA(TEND0_PD_MARK, PD10MD_100),
+	PINMUX_DATA(TIOC3C_MARK, PD10MD_101),
+
+	PINMUX_DATA(PD9_DATA, PD9MD_000, PD9_IN, PD9_OUT),
+	PINMUX_DATA(D25_MARK, PD9MD_001),
+	PINMUX_DATA(PINT1_PD_MARK, PD9MD_010),
+	PINMUX_DATA(DACK0_PD_MARK, PD9MD_100),
+	PINMUX_DATA(TIOC3B_MARK, PD9MD_101),
+
+	PINMUX_DATA(PD8_DATA, PD8MD_000, PD8_IN, PD8_OUT),
+	PINMUX_DATA(D24_MARK, PD8MD_001),
+	PINMUX_DATA(PINT0_PD_MARK, PD8MD_010),
+	PINMUX_DATA(DREQ0_PD_MARK, PD8MD_100),
+	PINMUX_DATA(TIOC3A_MARK, PD8MD_101),
+
+	PINMUX_DATA(PD7_DATA, PD7MD_000, PD7_IN, PD7_OUT),
+	PINMUX_DATA(D23_MARK, PD7MD_001),
+	PINMUX_DATA(IRQ7_PD_MARK, PD7MD_010),
+	PINMUX_DATA(SCS1_PD_MARK, PD7MD_011),
+	PINMUX_DATA(TCLKD_PD_MARK, PD7MD_100),
+	PINMUX_DATA(TIOC2B_MARK, PD7MD_101),
+
+	PINMUX_DATA(PD6_DATA, PD6MD_000, PD6_IN, PD6_OUT),
+	PINMUX_DATA(D22_MARK, PD6MD_001),
+	PINMUX_DATA(IRQ6_PD_MARK, PD6MD_010),
+	PINMUX_DATA(SSO1_PD_MARK, PD6MD_011),
+	PINMUX_DATA(TCLKC_PD_MARK, PD6MD_100),
+	PINMUX_DATA(TIOC2A_MARK, PD6MD_101),
+
+	PINMUX_DATA(PD5_DATA, PD5MD_000, PD5_IN, PD5_OUT),
+	PINMUX_DATA(D21_MARK, PD5MD_001),
+	PINMUX_DATA(IRQ5_PD_MARK, PD5MD_010),
+	PINMUX_DATA(SSI1_PD_MARK, PD5MD_011),
+	PINMUX_DATA(TCLKB_PD_MARK, PD5MD_100),
+	PINMUX_DATA(TIOC1B_MARK, PD5MD_101),
+
+	PINMUX_DATA(PD4_DATA, PD4MD_000, PD4_IN, PD4_OUT),
+	PINMUX_DATA(D20_MARK, PD4MD_001),
+	PINMUX_DATA(IRQ4_PD_MARK, PD4MD_010),
+	PINMUX_DATA(SSCK1_PD_MARK, PD4MD_011),
+	PINMUX_DATA(TCLKA_PD_MARK, PD4MD_100),
+	PINMUX_DATA(TIOC1A_MARK, PD4MD_101),
+
+	PINMUX_DATA(PD3_DATA, PD3MD_000, PD3_IN, PD3_OUT),
+	PINMUX_DATA(D19_MARK, PD3MD_001),
+	PINMUX_DATA(IRQ3_PD_MARK, PD3MD_010),
+	PINMUX_DATA(SCS0_PD_MARK, PD3MD_011),
+	PINMUX_DATA(DACK3_MARK, PD3MD_100),
+	PINMUX_DATA(TIOC0D_MARK, PD3MD_101),
+
+	PINMUX_DATA(PD2_DATA, PD2MD_000, PD2_IN, PD2_OUT),
+	PINMUX_DATA(D18_MARK, PD2MD_001),
+	PINMUX_DATA(IRQ2_PD_MARK, PD2MD_010),
+	PINMUX_DATA(SSO0_PD_MARK, PD2MD_011),
+	PINMUX_DATA(DREQ3_MARK, PD2MD_100),
+	PINMUX_DATA(TIOC0C_MARK, PD2MD_101),
+
+	PINMUX_DATA(PD1_DATA, PD1MD_000, PD1_IN, PD1_OUT),
+	PINMUX_DATA(D17_MARK, PD1MD_001),
+	PINMUX_DATA(IRQ1_PD_MARK, PD1MD_010),
+	PINMUX_DATA(SSI0_PD_MARK, PD1MD_011),
+	PINMUX_DATA(DACK2_MARK, PD1MD_100),
+	PINMUX_DATA(TIOC0B_MARK, PD1MD_101),
+
+	PINMUX_DATA(PD0_DATA, PD0MD_000, PD0_IN, PD0_OUT),
+	PINMUX_DATA(D16_MARK, PD0MD_001),
+	PINMUX_DATA(IRQ0_PD_MARK, PD0MD_010),
+	PINMUX_DATA(SSCK0_PD_MARK, PD0MD_011),
+	PINMUX_DATA(DREQ2_MARK, PD0MD_100),
+	PINMUX_DATA(TIOC0A_MARK, PD0MD_101),
+
+	/* PE */
+	PINMUX_DATA(PE15_DATA, PE15MD_00, PE15_IN, PE15_OUT),
+	PINMUX_DATA(IOIS16_MARK, PE15MD_01),
+	PINMUX_DATA(RTS3_MARK, PE15MD_11),
+
+	PINMUX_DATA(PE14_DATA, PE14MD_00, PE14_IN, PE14_OUT),
+	PINMUX_DATA(CS1_MARK, PE14MD_01),
+	PINMUX_DATA(CTS3_MARK, PE14MD_11),
+
+	PINMUX_DATA(PE13_DATA, PE13MD_00, PE13_IN, PE13_OUT),
+	PINMUX_DATA(TXD3_MARK, PE13MD_11),
+
+	PINMUX_DATA(PE12_DATA, PE12MD_00, PE12_IN, PE12_OUT),
+	PINMUX_DATA(RXD3_MARK, PE12MD_11),
+
+	PINMUX_DATA(PE11_DATA, PE11MD_000, PE11_IN, PE11_OUT),
+	PINMUX_DATA(CS6_CE1B_MARK, PE11MD_001),
+	PINMUX_DATA(IRQ7_PE_MARK, PE11MD_010),
+	PINMUX_DATA(TEND1_PE_MARK, PE11MD_100),
+
+	PINMUX_DATA(PE10_DATA, PE10MD_000, PE10_IN, PE10_OUT),
+	PINMUX_DATA(CE2B_MARK, PE10MD_001),
+	PINMUX_DATA(IRQ6_PE_MARK, PE10MD_010),
+	PINMUX_DATA(TEND0_PE_MARK, PE10MD_100),
+
+	PINMUX_DATA(PE9_DATA, PE9MD_00, PE9_IN, PE9_OUT),
+	PINMUX_DATA(CS5_CE1A_MARK, PE9MD_01),
+	PINMUX_DATA(IRQ5_PE_MARK, PE9MD_10),
+	PINMUX_DATA(SCK3_MARK, PE9MD_11),
+
+	PINMUX_DATA(PE8_DATA, PE8MD_00, PE8_IN, PE8_OUT),
+	PINMUX_DATA(CE2A_MARK, PE8MD_01),
+	PINMUX_DATA(IRQ4_PE_MARK, PE8MD_10),
+	PINMUX_DATA(SCK2_MARK, PE8MD_11),
+
+	PINMUX_DATA(PE7_DATA, PE7MD_000, PE7_IN, PE7_OUT),
+	PINMUX_DATA(FRAME_MARK, PE7MD_001),
+	PINMUX_DATA(IRQ3_PE_MARK, PE7MD_010),
+	PINMUX_DATA(TXD2_MARK, PE7MD_011),
+	PINMUX_DATA(DACK1_PE_MARK, PE7MD_100),
+
+	PINMUX_DATA(PE6_DATA, PE6MD_000, PE6_IN, PE6_OUT),
+	PINMUX_DATA(A25_MARK, PE6MD_001),
+	PINMUX_DATA(IRQ2_PE_MARK, PE6MD_010),
+	PINMUX_DATA(RXD2_MARK, PE6MD_011),
+	PINMUX_DATA(DREQ1_PE_MARK, PE6MD_100),
+
+	PINMUX_DATA(PE5_DATA, PE5MD_000, PE5_IN, PE5_OUT),
+	PINMUX_DATA(A24_MARK, PE5MD_001),
+	PINMUX_DATA(IRQ1_PE_MARK, PE5MD_010),
+	PINMUX_DATA(TXD1_MARK, PE5MD_011),
+	PINMUX_DATA(DACK0_PE_MARK, PE5MD_100),
+
+	PINMUX_DATA(PE4_DATA, PE4MD_000, PE4_IN, PE4_OUT),
+	PINMUX_DATA(A23_MARK, PE4MD_001),
+	PINMUX_DATA(IRQ0_PE_MARK, PE4MD_010),
+	PINMUX_DATA(RXD1_MARK, PE4MD_011),
+	PINMUX_DATA(DREQ0_PE_MARK, PE4MD_100),
+
+	PINMUX_DATA(PE3_DATA, PE3MD_00, PE3_IN, PE3_OUT),
+	PINMUX_DATA(A22_MARK, PE3MD_01),
+	PINMUX_DATA(SCK1_MARK, PE3MD_11),
+
+	PINMUX_DATA(PE2_DATA, PE2MD_00, PE2_IN, PE2_OUT),
+	PINMUX_DATA(A21_MARK, PE2MD_01),
+	PINMUX_DATA(SCK0_MARK, PE2MD_11),
+
+	PINMUX_DATA(PE1_DATA, PE1MD_00, PE1_IN, PE1_OUT),
+	PINMUX_DATA(CS4_MARK, PE1MD_01),
+	PINMUX_DATA(MRES_MARK, PE1MD_10),
+	PINMUX_DATA(TXD0_MARK, PE1MD_11),
+
+	PINMUX_DATA(PE0_DATA, PE0MD_000, PE0_IN, PE0_OUT),
+	PINMUX_DATA(BS_MARK, PE0MD_001),
+	PINMUX_DATA(RXD0_MARK, PE0MD_011),
+	PINMUX_DATA(ADTRG_PE_MARK, PE0MD_100),
+
+	/* PF */
+	PINMUX_DATA(PF30_DATA, PF30MD_0, PF30_IN, PF30_OUT),
+	PINMUX_DATA(AUDIO_CLK_MARK, PF30MD_1),
+
+	PINMUX_DATA(PF29_DATA, PF29MD_0, PF29_IN, PF29_OUT),
+	PINMUX_DATA(SSIDATA3_MARK, PF29MD_1),
+
+	PINMUX_DATA(PF28_DATA, PF28MD_0, PF28_IN, PF28_OUT),
+	PINMUX_DATA(SSIWS3_MARK, PF28MD_1),
+
+	PINMUX_DATA(PF27_DATA, PF27MD_0, PF27_IN, PF27_OUT),
+	PINMUX_DATA(SSISCK3_MARK, PF27MD_1),
+
+	PINMUX_DATA(PF26_DATA, PF26MD_0, PF26_IN, PF26_OUT),
+	PINMUX_DATA(SSIDATA2_MARK, PF26MD_1),
+
+	PINMUX_DATA(PF25_DATA, PF25MD_0, PF25_IN, PF25_OUT),
+	PINMUX_DATA(SSIWS2_MARK, PF25MD_1),
+
+	PINMUX_DATA(PF24_DATA, PF24MD_0, PF24_IN, PF24_OUT),
+	PINMUX_DATA(SSISCK2_MARK, PF24MD_1),
+
+	PINMUX_DATA(PF23_DATA, PF23MD_00, PF23_IN, PF23_OUT),
+	PINMUX_DATA(SSIDATA1_MARK, PF23MD_01),
+	PINMUX_DATA(LCD_VEPWC_MARK, PF23MD_10),
+
+	PINMUX_DATA(PF22_DATA, PF22MD_00, PF22_IN, PF22_OUT),
+	PINMUX_DATA(SSIWS1_MARK, PF22MD_01),
+	PINMUX_DATA(LCD_VCPWC_MARK, PF22MD_10),
+
+	PINMUX_DATA(PF21_DATA, PF21MD_00, PF21_IN, PF21_OUT),
+	PINMUX_DATA(SSISCK1_MARK, PF21MD_01),
+	PINMUX_DATA(LCD_CLK_MARK, PF21MD_10),
+
+	PINMUX_DATA(PF20_DATA, PF20MD_00, PF20_IN, PF20_OUT),
+	PINMUX_DATA(SSIDATA0_MARK, PF20MD_01),
+	PINMUX_DATA(LCD_FLM_MARK, PF20MD_10),
+
+	PINMUX_DATA(PF19_DATA, PF19MD_00, PF19_IN, PF19_OUT),
+	PINMUX_DATA(SSIWS0_MARK, PF19MD_01),
+	PINMUX_DATA(LCD_M_DISP_MARK, PF19MD_10),
+
+	PINMUX_DATA(PF18_DATA, PF18MD_00, PF18_IN, PF18_OUT),
+	PINMUX_DATA(SSISCK0_MARK, PF18MD_01),
+	PINMUX_DATA(LCD_CL2_MARK, PF18MD_10),
+
+	PINMUX_DATA(PF17_DATA, PF17MD_00, PF17_IN, PF17_OUT),
+	PINMUX_DATA(FCE_MARK, PF17MD_01),
+	PINMUX_DATA(LCD_CL1_MARK, PF17MD_10),
+
+	PINMUX_DATA(PF16_DATA, PF16MD_00, PF16_IN, PF16_OUT),
+	PINMUX_DATA(FRB_MARK, PF16MD_01),
+	PINMUX_DATA(LCD_DON_MARK, PF16MD_10),
+
+	PINMUX_DATA(PF15_DATA, PF15MD_00, PF15_IN, PF15_OUT),
+	PINMUX_DATA(NAF7_MARK, PF15MD_01),
+	PINMUX_DATA(LCD_DATA15_MARK, PF15MD_10),
+
+	PINMUX_DATA(PF14_DATA, PF14MD_00, PF14_IN, PF14_OUT),
+	PINMUX_DATA(NAF6_MARK, PF14MD_01),
+	PINMUX_DATA(LCD_DATA14_MARK, PF14MD_10),
+
+	PINMUX_DATA(PF13_DATA, PF13MD_00, PF13_IN, PF13_OUT),
+	PINMUX_DATA(NAF5_MARK, PF13MD_01),
+	PINMUX_DATA(LCD_DATA13_MARK, PF13MD_10),
+
+	PINMUX_DATA(PF12_DATA, PF12MD_00, PF12_IN, PF12_OUT),
+	PINMUX_DATA(NAF4_MARK, PF12MD_01),
+	PINMUX_DATA(LCD_DATA12_MARK, PF12MD_10),
+
+	PINMUX_DATA(PF11_DATA, PF11MD_00, PF11_IN, PF11_OUT),
+	PINMUX_DATA(NAF3_MARK, PF11MD_01),
+	PINMUX_DATA(LCD_DATA11_MARK, PF11MD_10),
+
+	PINMUX_DATA(PF10_DATA, PF10MD_00, PF10_IN, PF10_OUT),
+	PINMUX_DATA(NAF2_MARK, PF10MD_01),
+	PINMUX_DATA(LCD_DATA10_MARK, PF10MD_10),
+
+	PINMUX_DATA(PF9_DATA, PF9MD_00, PF9_IN, PF9_OUT),
+	PINMUX_DATA(NAF1_MARK, PF9MD_01),
+	PINMUX_DATA(LCD_DATA9_MARK, PF9MD_10),
+
+	PINMUX_DATA(PF8_DATA, PF8MD_00, PF8_IN, PF8_OUT),
+	PINMUX_DATA(NAF0_MARK, PF8MD_01),
+	PINMUX_DATA(LCD_DATA8_MARK, PF8MD_10),
+
+	PINMUX_DATA(PF7_DATA, PF7MD_00, PF7_IN, PF7_OUT),
+	PINMUX_DATA(FSC_MARK, PF7MD_01),
+	PINMUX_DATA(LCD_DATA7_MARK, PF7MD_10),
+	PINMUX_DATA(SCS1_PF_MARK, PF7MD_11),
+
+	PINMUX_DATA(PF6_DATA, PF6MD_00, PF6_IN, PF6_OUT),
+	PINMUX_DATA(FOE_MARK, PF6MD_01),
+	PINMUX_DATA(LCD_DATA6_MARK, PF6MD_10),
+	PINMUX_DATA(SSO1_PF_MARK, PF6MD_11),
+
+	PINMUX_DATA(PF5_DATA, PF5MD_00, PF5_IN, PF5_OUT),
+	PINMUX_DATA(FCDE_MARK, PF5MD_01),
+	PINMUX_DATA(LCD_DATA5_MARK, PF5MD_10),
+	PINMUX_DATA(SSI1_PF_MARK, PF5MD_11),
+
+	PINMUX_DATA(PF4_DATA, PF4MD_00, PF4_IN, PF4_OUT),
+	PINMUX_DATA(FWE_MARK, PF4MD_01),
+	PINMUX_DATA(LCD_DATA4_MARK, PF4MD_10),
+	PINMUX_DATA(SSCK1_PF_MARK, PF4MD_11),
+
+	PINMUX_DATA(PF3_DATA, PF3MD_00, PF3_IN, PF3_OUT),
+	PINMUX_DATA(TCLKD_PF_MARK, PF3MD_01),
+	PINMUX_DATA(LCD_DATA3_MARK, PF3MD_10),
+	PINMUX_DATA(SCS0_PF_MARK, PF3MD_11),
+
+	PINMUX_DATA(PF2_DATA, PF2MD_00, PF2_IN, PF2_OUT),
+	PINMUX_DATA(TCLKC_PF_MARK, PF2MD_01),
+	PINMUX_DATA(LCD_DATA2_MARK, PF2MD_10),
+	PINMUX_DATA(SSO0_PF_MARK, PF2MD_11),
+
+	PINMUX_DATA(PF1_DATA, PF1MD_00, PF1_IN, PF1_OUT),
+	PINMUX_DATA(TCLKB_PF_MARK, PF1MD_01),
+	PINMUX_DATA(LCD_DATA1_MARK, PF1MD_10),
+	PINMUX_DATA(SSI0_PF_MARK, PF1MD_11),
+
+	PINMUX_DATA(PF0_DATA, PF0MD_00, PF0_IN, PF0_OUT),
+	PINMUX_DATA(TCLKA_PF_MARK, PF0MD_01),
+	PINMUX_DATA(LCD_DATA0_MARK, PF0MD_10),
+	PINMUX_DATA(SSCK0_PF_MARK, PF0MD_11),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+
+	/* PA */
+	PINMUX_GPIO(GPIO_PA7, PA7_DATA),
+	PINMUX_GPIO(GPIO_PA6, PA6_DATA),
+	PINMUX_GPIO(GPIO_PA5, PA5_DATA),
+	PINMUX_GPIO(GPIO_PA4, PA4_DATA),
+	PINMUX_GPIO(GPIO_PA3, PA3_DATA),
+	PINMUX_GPIO(GPIO_PA2, PA2_DATA),
+	PINMUX_GPIO(GPIO_PA1, PA1_DATA),
+	PINMUX_GPIO(GPIO_PA0, PA0_DATA),
+
+	/* PB */
+	PINMUX_GPIO(GPIO_PB12, PB12_DATA),
+	PINMUX_GPIO(GPIO_PB11, PB11_DATA),
+	PINMUX_GPIO(GPIO_PB10, PB10_DATA),
+	PINMUX_GPIO(GPIO_PB9, PB9_DATA),
+	PINMUX_GPIO(GPIO_PB8, PB8_DATA),
+	PINMUX_GPIO(GPIO_PB7, PB7_DATA),
+	PINMUX_GPIO(GPIO_PB6, PB6_DATA),
+	PINMUX_GPIO(GPIO_PB5, PB5_DATA),
+	PINMUX_GPIO(GPIO_PB4, PB4_DATA),
+	PINMUX_GPIO(GPIO_PB3, PB3_DATA),
+	PINMUX_GPIO(GPIO_PB2, PB2_DATA),
+	PINMUX_GPIO(GPIO_PB1, PB1_DATA),
+	PINMUX_GPIO(GPIO_PB0, PB0_DATA),
+
+	/* PC */
+	PINMUX_GPIO(GPIO_PC14, PC14_DATA),
+	PINMUX_GPIO(GPIO_PC13, PC13_DATA),
+	PINMUX_GPIO(GPIO_PC12, PC12_DATA),
+	PINMUX_GPIO(GPIO_PC11, PC11_DATA),
+	PINMUX_GPIO(GPIO_PC10, PC10_DATA),
+	PINMUX_GPIO(GPIO_PC9, PC9_DATA),
+	PINMUX_GPIO(GPIO_PC8, PC8_DATA),
+	PINMUX_GPIO(GPIO_PC7, PC7_DATA),
+	PINMUX_GPIO(GPIO_PC6, PC6_DATA),
+	PINMUX_GPIO(GPIO_PC5, PC5_DATA),
+	PINMUX_GPIO(GPIO_PC4, PC4_DATA),
+	PINMUX_GPIO(GPIO_PC3, PC3_DATA),
+	PINMUX_GPIO(GPIO_PC2, PC2_DATA),
+	PINMUX_GPIO(GPIO_PC1, PC1_DATA),
+	PINMUX_GPIO(GPIO_PC0, PC0_DATA),
+
+	/* PD */
+	PINMUX_GPIO(GPIO_PD15, PD15_DATA),
+	PINMUX_GPIO(GPIO_PD14, PD14_DATA),
+	PINMUX_GPIO(GPIO_PD13, PD13_DATA),
+	PINMUX_GPIO(GPIO_PD12, PD12_DATA),
+	PINMUX_GPIO(GPIO_PD11, PD11_DATA),
+	PINMUX_GPIO(GPIO_PD10, PD10_DATA),
+	PINMUX_GPIO(GPIO_PD9, PD9_DATA),
+	PINMUX_GPIO(GPIO_PD8, PD8_DATA),
+	PINMUX_GPIO(GPIO_PD7, PD7_DATA),
+	PINMUX_GPIO(GPIO_PD6, PD6_DATA),
+	PINMUX_GPIO(GPIO_PD5, PD5_DATA),
+	PINMUX_GPIO(GPIO_PD4, PD4_DATA),
+	PINMUX_GPIO(GPIO_PD3, PD3_DATA),
+	PINMUX_GPIO(GPIO_PD2, PD2_DATA),
+	PINMUX_GPIO(GPIO_PD1, PD1_DATA),
+	PINMUX_GPIO(GPIO_PD0, PD0_DATA),
+
+	/* PE */
+	PINMUX_GPIO(GPIO_PE15, PE15_DATA),
+	PINMUX_GPIO(GPIO_PE14, PE14_DATA),
+	PINMUX_GPIO(GPIO_PE13, PE13_DATA),
+	PINMUX_GPIO(GPIO_PE12, PE12_DATA),
+	PINMUX_GPIO(GPIO_PE11, PE11_DATA),
+	PINMUX_GPIO(GPIO_PE10, PE10_DATA),
+	PINMUX_GPIO(GPIO_PE9, PE9_DATA),
+	PINMUX_GPIO(GPIO_PE8, PE8_DATA),
+	PINMUX_GPIO(GPIO_PE7, PE7_DATA),
+	PINMUX_GPIO(GPIO_PE6, PE6_DATA),
+	PINMUX_GPIO(GPIO_PE5, PE5_DATA),
+	PINMUX_GPIO(GPIO_PE4, PE4_DATA),
+	PINMUX_GPIO(GPIO_PE3, PE3_DATA),
+	PINMUX_GPIO(GPIO_PE2, PE2_DATA),
+	PINMUX_GPIO(GPIO_PE1, PE1_DATA),
+	PINMUX_GPIO(GPIO_PE0, PE0_DATA),
+
+	/* PF */
+	PINMUX_GPIO(GPIO_PF30, PF30_DATA),
+	PINMUX_GPIO(GPIO_PF29, PF29_DATA),
+	PINMUX_GPIO(GPIO_PF28, PF28_DATA),
+	PINMUX_GPIO(GPIO_PF27, PF27_DATA),
+	PINMUX_GPIO(GPIO_PF26, PF26_DATA),
+	PINMUX_GPIO(GPIO_PF25, PF25_DATA),
+	PINMUX_GPIO(GPIO_PF24, PF24_DATA),
+	PINMUX_GPIO(GPIO_PF23, PF23_DATA),
+	PINMUX_GPIO(GPIO_PF22, PF22_DATA),
+	PINMUX_GPIO(GPIO_PF21, PF21_DATA),
+	PINMUX_GPIO(GPIO_PF20, PF20_DATA),
+	PINMUX_GPIO(GPIO_PF19, PF19_DATA),
+	PINMUX_GPIO(GPIO_PF18, PF18_DATA),
+	PINMUX_GPIO(GPIO_PF17, PF17_DATA),
+	PINMUX_GPIO(GPIO_PF16, PF16_DATA),
+	PINMUX_GPIO(GPIO_PF15, PF15_DATA),
+	PINMUX_GPIO(GPIO_PF14, PF14_DATA),
+	PINMUX_GPIO(GPIO_PF13, PF13_DATA),
+	PINMUX_GPIO(GPIO_PF12, PF12_DATA),
+	PINMUX_GPIO(GPIO_PF11, PF11_DATA),
+	PINMUX_GPIO(GPIO_PF10, PF10_DATA),
+	PINMUX_GPIO(GPIO_PF9, PF9_DATA),
+	PINMUX_GPIO(GPIO_PF8, PF8_DATA),
+	PINMUX_GPIO(GPIO_PF7, PF7_DATA),
+	PINMUX_GPIO(GPIO_PF6, PF6_DATA),
+	PINMUX_GPIO(GPIO_PF5, PF5_DATA),
+	PINMUX_GPIO(GPIO_PF4, PF4_DATA),
+	PINMUX_GPIO(GPIO_PF3, PF3_DATA),
+	PINMUX_GPIO(GPIO_PF2, PF2_DATA),
+	PINMUX_GPIO(GPIO_PF1, PF1_DATA),
+	PINMUX_GPIO(GPIO_PF0, PF0_DATA),
+
+	/* INTC */
+	PINMUX_GPIO(GPIO_FN_PINT7_PB, PINT7_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT6_PB, PINT6_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT5_PB, PINT5_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT4_PB, PINT4_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT3_PB, PINT3_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT2_PB, PINT2_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT1_PB, PINT1_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT0_PB, PINT0_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT7_PD, PINT7_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT6_PD, PINT6_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT5_PD, PINT5_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT4_PD, PINT4_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT3_PD, PINT3_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT2_PD, PINT2_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT1_PD, PINT1_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_PINT0_PD, PINT0_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ7_PB, IRQ7_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ6_PB, IRQ6_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ5_PB, IRQ5_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ4_PB, IRQ4_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ3_PB, IRQ3_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ2_PB, IRQ2_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ1_PB, IRQ1_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ0_PB, IRQ0_PB_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ7_PD, IRQ7_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ6_PD, IRQ6_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ5_PD, IRQ5_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ4_PD, IRQ4_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ3_PD, IRQ3_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ2_PD, IRQ2_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ1_PD, IRQ1_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ0_PD, IRQ0_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ7_PE, IRQ7_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ6_PE, IRQ6_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ5_PE, IRQ5_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ4_PE, IRQ4_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ3_PE, IRQ3_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ2_PE, IRQ2_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ1_PE, IRQ1_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ0_PE, IRQ0_PE_MARK),
+
+	PINMUX_GPIO(GPIO_FN_WDTOVF, WDTOVF_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQOUT, IRQOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_REFOUT, REFOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQOUT_REFOUT, IRQOUT_REFOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_UBCTRG, UBCTRG_MARK),
+
+	/* CAN */
+	PINMUX_GPIO(GPIO_FN_CTX1, CTX1_MARK),
+	PINMUX_GPIO(GPIO_FN_CRX1, CRX1_MARK),
+	PINMUX_GPIO(GPIO_FN_CTX0, CTX0_MARK),
+	PINMUX_GPIO(GPIO_FN_CTX0_CTX1, CTX0_CTX1_MARK),
+	PINMUX_GPIO(GPIO_FN_CRX0, CRX0_MARK),
+	PINMUX_GPIO(GPIO_FN_CRX0_CRX1, CRX0_CRX1_MARK),
+
+	/* IIC3 */
+	PINMUX_GPIO(GPIO_FN_SDA3, SDA3_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL3, SCL3_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA2, SDA2_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL2, SCL2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA1, SDA1_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL1, SCL1_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA0, SDA0_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL0, SCL0_MARK),
+
+	/* DMAC */
+	PINMUX_GPIO(GPIO_FN_TEND0_PD, TEND0_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_TEND0_PE, TEND0_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK0_PD, DACK0_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK0_PE, DACK0_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ0_PD, DREQ0_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ0_PE, DREQ0_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_TEND1_PD, TEND1_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_TEND1_PE, TEND1_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK1_PD, DACK1_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK1_PE, DACK1_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ1_PD, DREQ1_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ1_PE, DREQ1_PE_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK2, DACK2_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ2, DREQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK3, DACK3_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ3, DREQ3_MARK),
+
+	/* ADC */
+	PINMUX_GPIO(GPIO_FN_ADTRG_PD, ADTRG_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_ADTRG_PE, ADTRG_PE_MARK),
+
+	/* BSC */
+	PINMUX_GPIO(GPIO_FN_D31, D31_MARK),
+	PINMUX_GPIO(GPIO_FN_D30, D30_MARK),
+	PINMUX_GPIO(GPIO_FN_D29, D29_MARK),
+	PINMUX_GPIO(GPIO_FN_D28, D28_MARK),
+	PINMUX_GPIO(GPIO_FN_D27, D27_MARK),
+	PINMUX_GPIO(GPIO_FN_D26, D26_MARK),
+	PINMUX_GPIO(GPIO_FN_D25, D25_MARK),
+	PINMUX_GPIO(GPIO_FN_D24, D24_MARK),
+	PINMUX_GPIO(GPIO_FN_D23, D23_MARK),
+	PINMUX_GPIO(GPIO_FN_D22, D22_MARK),
+	PINMUX_GPIO(GPIO_FN_D21, D21_MARK),
+	PINMUX_GPIO(GPIO_FN_D20, D20_MARK),
+	PINMUX_GPIO(GPIO_FN_D19, D19_MARK),
+	PINMUX_GPIO(GPIO_FN_D18, D18_MARK),
+	PINMUX_GPIO(GPIO_FN_D17, D17_MARK),
+	PINMUX_GPIO(GPIO_FN_D16, D16_MARK),
+	PINMUX_GPIO(GPIO_FN_A25, A25_MARK),
+	PINMUX_GPIO(GPIO_FN_A24, A24_MARK),
+	PINMUX_GPIO(GPIO_FN_A23, A23_MARK),
+	PINMUX_GPIO(GPIO_FN_A22, A22_MARK),
+	PINMUX_GPIO(GPIO_FN_A21, A21_MARK),
+	PINMUX_GPIO(GPIO_FN_CS4, CS4_MARK),
+	PINMUX_GPIO(GPIO_FN_MRES, MRES_MARK),
+	PINMUX_GPIO(GPIO_FN_BS, BS_MARK),
+	PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK),
+	PINMUX_GPIO(GPIO_FN_CS1, CS1_MARK),
+	PINMUX_GPIO(GPIO_FN_CS6_CE1B, CS6_CE1B_MARK),
+	PINMUX_GPIO(GPIO_FN_CE2B, CE2B_MARK),
+	PINMUX_GPIO(GPIO_FN_CS5_CE1A, CS5_CE1A_MARK),
+	PINMUX_GPIO(GPIO_FN_CE2A, CE2A_MARK),
+	PINMUX_GPIO(GPIO_FN_FRAME, FRAME_MARK),
+	PINMUX_GPIO(GPIO_FN_WAIT, WAIT_MARK),
+	PINMUX_GPIO(GPIO_FN_RDWR, RDWR_MARK),
+	PINMUX_GPIO(GPIO_FN_CKE, CKE_MARK),
+	PINMUX_GPIO(GPIO_FN_CASU, CASU_MARK),
+	PINMUX_GPIO(GPIO_FN_BREQ, BREQ_MARK),
+	PINMUX_GPIO(GPIO_FN_RASU, RASU_MARK),
+	PINMUX_GPIO(GPIO_FN_BACK, BACK_MARK),
+	PINMUX_GPIO(GPIO_FN_CASL, CASL_MARK),
+	PINMUX_GPIO(GPIO_FN_RASL, RASL_MARK),
+	PINMUX_GPIO(GPIO_FN_WE3_DQMUU_AH_ICIO_WR, WE3_DQMUU_AH_ICIO_WR_MARK),
+	PINMUX_GPIO(GPIO_FN_WE2_DQMUL_ICIORD, WE2_DQMUL_ICIORD_MARK),
+	PINMUX_GPIO(GPIO_FN_WE1_DQMLU_WE, WE1_DQMLU_WE_MARK),
+	PINMUX_GPIO(GPIO_FN_WE0_DQMLL, WE0_DQMLL_MARK),
+	PINMUX_GPIO(GPIO_FN_CS3, CS3_MARK),
+	PINMUX_GPIO(GPIO_FN_CS2, CS2_MARK),
+	PINMUX_GPIO(GPIO_FN_A1, A1_MARK),
+	PINMUX_GPIO(GPIO_FN_A0, A0_MARK),
+	PINMUX_GPIO(GPIO_FN_CS7, CS7_MARK),
+
+	/* TMU */
+	PINMUX_GPIO(GPIO_FN_TIOC4D, TIOC4D_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC4C, TIOC4C_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC4B, TIOC4B_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC4A, TIOC4A_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC3D, TIOC3D_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC3C, TIOC3C_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC3B, TIOC3B_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC3A, TIOC3A_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC2B, TIOC2B_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC1B, TIOC1B_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC2A, TIOC2A_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC1A, TIOC1A_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC0D, TIOC0D_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC0C, TIOC0C_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC0B, TIOC0B_MARK),
+	PINMUX_GPIO(GPIO_FN_TIOC0A, TIOC0A_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLKD_PD, TCLKD_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLKC_PD, TCLKC_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLKB_PD, TCLKB_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLKA_PD, TCLKA_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLKD_PF, TCLKD_PF_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLKC_PF, TCLKC_PF_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLKB_PF, TCLKB_PF_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLKA_PF, TCLKA_PF_MARK),
+
+	/* SSU */
+	PINMUX_GPIO(GPIO_FN_SCS0_PD, SCS0_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_SSO0_PD, SSO0_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_PD, SSI0_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_SSCK0_PD, SSCK0_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCS0_PF, SCS0_PF_MARK),
+	PINMUX_GPIO(GPIO_FN_SSO0_PF, SSO0_PF_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_PF, SSI0_PF_MARK),
+	PINMUX_GPIO(GPIO_FN_SSCK0_PF, SSCK0_PF_MARK),
+	PINMUX_GPIO(GPIO_FN_SCS1_PD, SCS1_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_SSO1_PD, SSO1_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_PD, SSI1_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_SSCK1_PD, SSCK1_PD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCS1_PF, SCS1_PF_MARK),
+	PINMUX_GPIO(GPIO_FN_SSO1_PF, SSO1_PF_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_PF, SSI1_PF_MARK),
+	PINMUX_GPIO(GPIO_FN_SSCK1_PF, SSCK1_PF_MARK),
+
+	/* SCIF */
+	PINMUX_GPIO(GPIO_FN_TXD0, TXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_RXD0, RXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_SCK0, SCK0_MARK),
+	PINMUX_GPIO(GPIO_FN_TXD1, TXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_RXD1, RXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_SCK1, SCK1_MARK),
+	PINMUX_GPIO(GPIO_FN_TXD2, TXD2_MARK),
+	PINMUX_GPIO(GPIO_FN_RXD2, RXD2_MARK),
+	PINMUX_GPIO(GPIO_FN_SCK2, SCK2_MARK),
+	PINMUX_GPIO(GPIO_FN_RTS3, RTS3_MARK),
+	PINMUX_GPIO(GPIO_FN_CTS3, CTS3_MARK),
+	PINMUX_GPIO(GPIO_FN_TXD3, TXD3_MARK),
+	PINMUX_GPIO(GPIO_FN_RXD3, RXD3_MARK),
+	PINMUX_GPIO(GPIO_FN_SCK3, SCK3_MARK),
+
+	/* SSI */
+	PINMUX_GPIO(GPIO_FN_AUDIO_CLK, AUDIO_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SSIDATA3, SSIDATA3_MARK),
+	PINMUX_GPIO(GPIO_FN_SSIWS3, SSIWS3_MARK),
+	PINMUX_GPIO(GPIO_FN_SSISCK3, SSISCK3_MARK),
+	PINMUX_GPIO(GPIO_FN_SSIDATA2, SSIDATA2_MARK),
+	PINMUX_GPIO(GPIO_FN_SSIWS2, SSIWS2_MARK),
+	PINMUX_GPIO(GPIO_FN_SSISCK2, SSISCK2_MARK),
+	PINMUX_GPIO(GPIO_FN_SSIDATA1, SSIDATA1_MARK),
+	PINMUX_GPIO(GPIO_FN_SSIWS1, SSIWS1_MARK),
+	PINMUX_GPIO(GPIO_FN_SSISCK1, SSISCK1_MARK),
+	PINMUX_GPIO(GPIO_FN_SSIDATA0, SSIDATA0_MARK),
+	PINMUX_GPIO(GPIO_FN_SSIWS0, SSIWS0_MARK),
+	PINMUX_GPIO(GPIO_FN_SSISCK0, SSISCK0_MARK),
+
+	/* FLCTL */
+	PINMUX_GPIO(GPIO_FN_FCE, FCE_MARK),
+	PINMUX_GPIO(GPIO_FN_FRB, FRB_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF7, NAF7_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF6, NAF6_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF5, NAF5_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF4, NAF4_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF3, NAF3_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF2, NAF2_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF1, NAF1_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF0, NAF0_MARK),
+	PINMUX_GPIO(GPIO_FN_FSC, FSC_MARK),
+	PINMUX_GPIO(GPIO_FN_FOE, FOE_MARK),
+	PINMUX_GPIO(GPIO_FN_FCDE, FCDE_MARK),
+	PINMUX_GPIO(GPIO_FN_FWE, FWE_MARK),
+
+	/* LCDC */
+	PINMUX_GPIO(GPIO_FN_LCD_VEPWC, LCD_VEPWC_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_VCPWC, LCD_VCPWC_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_CLK, LCD_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_FLM, LCD_FLM_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_M_DISP, LCD_M_DISP_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_CL2, LCD_CL2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_CL1, LCD_CL1_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DON, LCD_DON_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA15, LCD_DATA15_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA14, LCD_DATA14_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA13, LCD_DATA13_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA12, LCD_DATA12_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA11, LCD_DATA11_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA10, LCD_DATA10_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA9, LCD_DATA9_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA8, LCD_DATA8_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA7, LCD_DATA7_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA6, LCD_DATA6_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA5, LCD_DATA5_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA4, LCD_DATA4_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA3, LCD_DATA3_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA2, LCD_DATA2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA1, LCD_DATA1_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA0, LCD_DATA0_MARK),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("PBIORL", 0xfffe3886, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PB11_IN, PB11_OUT,
+		PB10_IN, PB10_OUT,
+		PB9_IN, PB9_OUT,
+		PB8_IN, PB8_OUT,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0 }
+	},
+	{ PINMUX_CFG_REG("PBCRL4", 0xfffe3890, 16, 4) {
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PBCRL3", 0xfffe3892, 16, 4) {
+		PB11MD_0, PB11MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB10MD_0, PB10MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB9MD_00, PB9MD_01, PB9MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB8MD_00, PB8MD_01, PB8MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PBCRL2", 0xfffe3894, 16, 4) {
+		PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PBCRL1", 0xfffe3896, 16, 4) {
+		PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB0MD_00, PB0MD_01, PB0MD_10, PB0MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("IFCR", 0xfffe38a2, 16, 4) {
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PB12IRQ_00, PB12IRQ_01, PB12IRQ_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PCIORL", 0xfffe3906, 16, 1) {
+		0, 0,
+		PC14_IN, PC14_OUT,
+		PC13_IN, PC13_OUT,
+		PC12_IN, PC12_OUT,
+		PC11_IN, PC11_OUT,
+		PC10_IN, PC10_OUT,
+		PC9_IN, PC9_OUT,
+		PC8_IN, PC8_OUT,
+		PC7_IN, PC7_OUT,
+		PC6_IN, PC6_OUT,
+		PC5_IN, PC5_OUT,
+		PC4_IN, PC4_OUT,
+		PC3_IN, PC3_OUT,
+		PC2_IN, PC2_OUT,
+		PC1_IN, PC1_OUT,
+		PC0_IN, PC0_OUT }
+	},
+	{ PINMUX_CFG_REG("PCCRL4", 0xfffe3910, 16, 4) {
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC14MD_0, PC14MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC13MD_0, PC13MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC12MD_0, PC12MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PCCRL3", 0xfffe3912, 16, 4) {
+		PC11MD_00, PC11MD_01, PC11MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC10MD_00, PC10MD_01, PC10MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC9MD_0, PC9MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC8MD_0, PC8MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PCCRL2", 0xfffe3914, 16, 4) {
+		PC7MD_0, PC7MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC6MD_0, PC6MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC5MD_0, PC5MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC4MD_0, PC4MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PCCRL1", 0xfffe3916, 16, 4) {
+		PC3MD_0, PC3MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC2MD_0, PC2MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC1MD_0, PC1MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PC0MD_00, PC0MD_01, PC0MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PDIORL", 0xfffe3986, 16, 1) {
+		PD15_IN, PD15_OUT,
+		PD14_IN, PD14_OUT,
+		PD13_IN, PD13_OUT,
+		PD12_IN, PD12_OUT,
+		PD11_IN, PD11_OUT,
+		PD10_IN, PD10_OUT,
+		PD9_IN, PD9_OUT,
+		PD8_IN, PD8_OUT,
+		PD7_IN, PD7_OUT,
+		PD6_IN, PD6_OUT,
+		PD5_IN, PD5_OUT,
+		PD4_IN, PD4_OUT,
+		PD3_IN, PD3_OUT,
+		PD2_IN, PD2_OUT,
+		PD1_IN, PD1_OUT,
+		PD0_IN, PD0_OUT }
+	},
+	{ PINMUX_CFG_REG("PDCRL4", 0xfffe3990, 16, 4) {
+		PD15MD_000, PD15MD_001, PD15MD_010, 0,
+		PD15MD_100, PD15MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD14MD_000, PD14MD_001, PD14MD_010, 0,
+		0, PD14MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD13MD_000, PD13MD_001, PD13MD_010, 0,
+		PD13MD_100, PD13MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD12MD_000, PD12MD_001, PD12MD_010, 0,
+		PD12MD_100, PD12MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PDCRL3", 0xfffe3992, 16, 4) {
+		PD11MD_000, PD11MD_001, PD11MD_010, 0,
+		PD11MD_100, PD11MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD10MD_000, PD10MD_001, PD10MD_010, 0,
+		PD10MD_100, PD10MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD9MD_000, PD9MD_001, PD9MD_010, 0,
+		PD9MD_100, PD9MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD8MD_000, PD8MD_001, PD8MD_010, 0,
+		PD8MD_100, PD8MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PDCRL2", 0xfffe3994, 16, 4) {
+		PD7MD_000, PD7MD_001, PD7MD_010, PD7MD_011,
+		PD7MD_100, PD7MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD6MD_000, PD6MD_001, PD6MD_010, PD6MD_011,
+		PD6MD_100, PD6MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD5MD_000, PD5MD_001, PD5MD_010, PD5MD_011,
+		PD5MD_100, PD5MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD4MD_000, PD4MD_001, PD4MD_010, PD4MD_011,
+		PD4MD_100, PD4MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PDCRL1", 0xfffe3996, 16, 4) {
+		PD3MD_000, PD3MD_001, PD3MD_010, PD3MD_011,
+		PD3MD_100, PD3MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD2MD_000, PD2MD_001, PD2MD_010, PD2MD_011,
+		PD2MD_100, PD2MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD1MD_000, PD1MD_001, PD1MD_010, PD1MD_011,
+		PD1MD_100, PD1MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PD0MD_000, PD0MD_001, PD0MD_010, PD0MD_011,
+		PD0MD_100, PD0MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PEIORL", 0xfffe3a06, 16, 1) {
+		PE15_IN, PE15_OUT,
+		PE14_IN, PE14_OUT,
+		PE13_IN, PE13_OUT,
+		PE12_IN, PE12_OUT,
+		PE11_IN, PE11_OUT,
+		PE10_IN, PE10_OUT,
+		PE9_IN, PE9_OUT,
+		PE8_IN, PE8_OUT,
+		PE7_IN, PE7_OUT,
+		PE6_IN, PE6_OUT,
+		PE5_IN, PE5_OUT,
+		PE4_IN, PE4_OUT,
+		PE3_IN, PE3_OUT,
+		PE2_IN, PE2_OUT,
+		PE1_IN, PE1_OUT,
+		PE0_IN, PE0_OUT }
+	},
+	{ PINMUX_CFG_REG("PECRL4", 0xfffe3a10, 16, 4) {
+		PE15MD_00, PE15MD_01, 0, PE15MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE14MD_00, PE14MD_01, 0, PE14MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE13MD_00, 0, 0, PE13MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE12MD_00, 0, 0, PE12MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PECRL3", 0xfffe3a12, 16, 4) {
+		PE11MD_000, PE11MD_001, PE11MD_010, 0,
+		PE11MD_100, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE10MD_000, PE10MD_001, PE10MD_010, 0,
+		PE10MD_100, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE9MD_00, PE9MD_01, PE9MD_10, PE9MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE8MD_00, PE8MD_01, PE8MD_10, PE8MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PECRL2", 0xfffe3a14, 16, 4) {
+		PE7MD_000, PE7MD_001, PE7MD_010, PE7MD_011,
+		PE7MD_100, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE6MD_000, PE6MD_001, PE6MD_010, PE6MD_011,
+		PE6MD_100, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE5MD_000, PE5MD_001, PE5MD_010, PE5MD_011,
+		PE5MD_100, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE4MD_000, PE4MD_001, PE4MD_010, PE4MD_011,
+		PE4MD_100, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PECRL1", 0xfffe3a16, 16, 4) {
+		PE3MD_00, PE3MD_01, 0, PE3MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE2MD_00, PE2MD_01, 0, PE2MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE1MD_00, PE1MD_01, PE1MD_10, PE1MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PE0MD_000, PE0MD_001, 0, PE0MD_011,
+		PE0MD_100, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PFIORH", 0xfffe3a84, 16, 1) {
+		0, 0,
+		PF30_IN, PF30_OUT,
+		PF29_IN, PF29_OUT,
+		PF28_IN, PF28_OUT,
+		PF27_IN, PF27_OUT,
+		PF26_IN, PF26_OUT,
+		PF25_IN, PF25_OUT,
+		PF24_IN, PF24_OUT,
+		PF23_IN, PF23_OUT,
+		PF22_IN, PF22_OUT,
+		PF21_IN, PF21_OUT,
+		PF20_IN, PF20_OUT,
+		PF19_IN, PF19_OUT,
+		PF18_IN, PF18_OUT,
+		PF17_IN, PF17_OUT,
+		PF16_IN, PF16_OUT }
+	},
+	{ PINMUX_CFG_REG("PFIORL", 0xfffe3a86, 16, 1) {
+		PF15_IN, PF15_OUT,
+		PF14_IN, PF14_OUT,
+		PF13_IN, PF13_OUT,
+		PF12_IN, PF12_OUT,
+		PF11_IN, PF11_OUT,
+		PF10_IN, PF10_OUT,
+		PF9_IN, PF9_OUT,
+		PF8_IN, PF8_OUT,
+		PF7_IN, PF7_OUT,
+		PF6_IN, PF6_OUT,
+		PF5_IN, PF5_OUT,
+		PF4_IN, PF4_OUT,
+		PF3_IN, PF3_OUT,
+		PF2_IN, PF2_OUT,
+		PF1_IN, PF1_OUT,
+		PF0_IN, PF0_OUT }
+	},
+	{ PINMUX_CFG_REG("PFCRH4", 0xfffe3a88, 16, 4) {
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF30MD_0, PF30MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF29MD_0, PF29MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF28MD_0, PF28MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PFCRH3", 0xfffe3a8a, 16, 4) {
+		PF27MD_0, PF27MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF26MD_0, PF26MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF25MD_0, PF25MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF24MD_0, PF24MD_1,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PFCRH2", 0xfffe3a8c, 16, 4) {
+		PF23MD_00, PF23MD_01, PF23MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF22MD_00, PF22MD_01, PF22MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF21MD_00, PF21MD_01, PF21MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF20MD_00, PF20MD_01, PF20MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PFCRH1", 0xfffe3a8e, 16, 4) {
+		PF19MD_00, PF19MD_01, PF19MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF18MD_00, PF18MD_01, PF18MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF17MD_00, PF17MD_01, PF17MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF16MD_00, PF16MD_01, PF16MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PFCRL4", 0xfffe3a90, 16, 4) {
+		PF15MD_00, PF15MD_01, PF15MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF14MD_00, PF14MD_01, PF14MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF13MD_00, PF13MD_01, PF13MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF12MD_00, PF12MD_01, PF12MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PFCRL3", 0xfffe3a92, 16, 4) {
+		PF11MD_00, PF11MD_01, PF11MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF10MD_00, PF10MD_01, PF10MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF9MD_00, PF9MD_01, PF9MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF8MD_00, PF8MD_01, PF8MD_10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PFCRL2", 0xfffe3a94, 16, 4) {
+		PF7MD_00, PF7MD_01, PF7MD_10, PF7MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF6MD_00, PF6MD_01, PF6MD_10, PF6MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF5MD_00, PF5MD_01, PF5MD_10, PF5MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF4MD_00, PF4MD_01, PF4MD_10, PF4MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PFCRL1", 0xfffe3a96, 16, 4) {
+		PF3MD_00, PF3MD_01, PF3MD_10, PF3MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF2MD_00, PF2MD_01, PF2MD_10, PF2MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF1MD_00, PF1MD_01, PF1MD_10, PF1MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+		PF0MD_00, PF0MD_01, PF0MD_10, PF0MD_11,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PADRL", 0xfffe3802, 16) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
+		PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA }
+	},
+	{ PINMUX_DATA_REG("PBDRL", 0xfffe3882, 16) {
+		0, 0, 0, PB12_DATA,
+		PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
+		PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
+		PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA }
+	},
+	{ PINMUX_DATA_REG("PCDRL", 0xfffe3902, 16) {
+		0, PC14_DATA, PC13_DATA, PC12_DATA,
+		PC11_DATA, PC10_DATA, PC9_DATA, PC8_DATA,
+		PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
+		PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA }
+	},
+	{ PINMUX_DATA_REG("PDDRL", 0xfffe3982, 16) {
+		PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
+		PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
+		PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
+		PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA }
+	},
+	{ PINMUX_DATA_REG("PEDRL", 0xfffe3a02, 16) {
+		PE15_DATA, PE14_DATA, PE13_DATA, PE12_DATA,
+		PE11_DATA, PE10_DATA, PE9_DATA, PE8_DATA,
+		PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
+		PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA }
+	},
+	{ PINMUX_DATA_REG("PFDRH", 0xfffe3a80, 16) {
+		0, PF30_DATA, PF29_DATA, PF28_DATA,
+		PF27_DATA, PF26_DATA, PF25_DATA, PF24_DATA,
+		PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
+		PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA }
+	},
+	{ PINMUX_DATA_REG("PFDRL", 0xfffe3a82, 16) {
+		PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
+		PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
+		PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
+		PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7203_pinmux_info = {
+	.name = "sh7203_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PA7,
+	.last_gpio = GPIO_FN_LCD_DATA0,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return register_pinmux(&sh7203_pinmux_info);
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index 511de55..e07c69e 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -24,4 +24,8 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7710)	:= clock-sh7710.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7720)	:= clock-sh7710.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7712)	:= clock-sh7712.o
 
+# Pinmux setup
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7720)	:= pinmux-sh7720.o
+
 obj-y	+= $(clock-y)
+obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c b/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
new file mode 100644
index 0000000..9ca1546
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
@@ -0,0 +1,1242 @@
+/*
+ * SH7720 Pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7720.h>
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+	PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
+	PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+	PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
+	PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+	PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
+	PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+	PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
+	PTE6_DATA, PTE5_DATA, PTE4_DATA,
+	PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
+	PTF6_DATA, PTF5_DATA, PTF4_DATA,
+	PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
+	PTG6_DATA, PTG5_DATA, PTG4_DATA,
+	PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
+	PTH6_DATA, PTH5_DATA, PTH4_DATA,
+	PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
+	PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
+	PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
+	PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
+	PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA, PTL3_DATA,
+	PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+	PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
+	PTP4_DATA, PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA,
+	PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+	PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
+	PTS4_DATA, PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
+	PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
+	PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
+	PTV4_DATA, PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
+	PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
+	PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
+	PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
+	PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
+	PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
+	PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
+	PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
+	PTE6_IN, PTE5_IN, PTE4_IN,
+	PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
+	PTF6_IN, PTF5_IN, PTF4_IN,
+	PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
+	PTG6_IN, PTG5_IN, PTG4_IN,
+	PTG3_IN, PTG2_IN, PTG1_IN, PTG0_IN,
+	PTH6_IN, PTH5_IN, PTH4_IN,
+	PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
+	PTJ6_IN, PTJ5_IN, PTJ4_IN,
+	PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
+	PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
+	PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN, PTL3_IN,
+	PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
+	PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
+	PTP4_IN, PTP3_IN, PTP2_IN, PTP1_IN, PTP0_IN,
+	PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
+	PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
+	PTS4_IN, PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
+	PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
+	PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
+	PTV4_IN, PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PTA7_IN_PU, PTA6_IN_PU, PTA5_IN_PU, PTA4_IN_PU,
+	PTA3_IN_PU, PTA2_IN_PU, PTA1_IN_PU, PTA0_IN_PU,
+	PTB7_IN_PU, PTB6_IN_PU, PTB5_IN_PU, PTB4_IN_PU,
+	PTB3_IN_PU, PTB2_IN_PU, PTB1_IN_PU, PTB0_IN_PU,
+	PTC7_IN_PU, PTC6_IN_PU, PTC5_IN_PU, PTC4_IN_PU,
+	PTC3_IN_PU, PTC2_IN_PU, PTC1_IN_PU, PTC0_IN_PU,
+	PTD7_IN_PU, PTD6_IN_PU, PTD5_IN_PU, PTD4_IN_PU,
+	PTD3_IN_PU, PTD2_IN_PU, PTD1_IN_PU, PTD0_IN_PU,
+	PTE4_IN_PU, PTE3_IN_PU, PTE2_IN_PU, PTE1_IN_PU, PTE0_IN_PU,
+	PTF0_IN_PU,
+	PTG6_IN_PU, PTG5_IN_PU, PTG4_IN_PU,
+	PTG3_IN_PU, PTG2_IN_PU, PTG1_IN_PU, PTG0_IN_PU,
+	PTH6_IN_PU, PTH5_IN_PU, PTH4_IN_PU,
+	PTH3_IN_PU, PTH2_IN_PU, PTH1_IN_PU, PTH0_IN_PU,
+	PTJ6_IN_PU, PTJ5_IN_PU, PTJ4_IN_PU,
+	PTJ3_IN_PU, PTJ2_IN_PU, PTJ1_IN_PU, PTJ0_IN_PU,
+	PTK3_IN_PU, PTK2_IN_PU, PTK1_IN_PU, PTK0_IN_PU,
+	PTL7_IN_PU, PTL6_IN_PU, PTL5_IN_PU, PTL4_IN_PU, PTL3_IN_PU,
+	PTM7_IN_PU, PTM6_IN_PU, PTM5_IN_PU, PTM4_IN_PU,
+	PTM3_IN_PU, PTM2_IN_PU, PTM1_IN_PU, PTM0_IN_PU,
+	PTP4_IN_PU, PTP3_IN_PU, PTP2_IN_PU, PTP1_IN_PU, PTP0_IN_PU,
+	PTR7_IN_PU, PTR6_IN_PU, PTR5_IN_PU, PTR4_IN_PU,
+	PTR3_IN_PU, PTR2_IN_PU, PTR1_IN_PU, PTR0_IN_PU,
+	PTS4_IN_PU, PTS3_IN_PU, PTS2_IN_PU, PTS1_IN_PU, PTS0_IN_PU,
+	PTT4_IN_PU, PTT3_IN_PU, PTT2_IN_PU, PTT1_IN_PU, PTT0_IN_PU,
+	PTU4_IN_PU, PTU3_IN_PU, PTU2_IN_PU, PTU1_IN_PU, PTU0_IN_PU,
+	PTV4_IN_PU, PTV3_IN_PU, PTV2_IN_PU, PTV1_IN_PU, PTV0_IN_PU,
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
+	PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
+	PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
+	PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
+	PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
+	PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
+	PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
+	PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
+	PTE4_OUT, PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
+	PTF0_OUT,
+	PTG6_OUT, PTG5_OUT, PTG4_OUT,
+	PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
+	PTH6_OUT, PTH5_OUT, PTH4_OUT,
+	PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
+	PTJ6_OUT, PTJ5_OUT, PTJ4_OUT,
+	PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
+	PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
+	PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT, PTL3_OUT,
+	PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
+	PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
+	PTP4_OUT, PTP3_OUT, PTP2_OUT, PTP1_OUT, PTP0_OUT,
+	PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
+	PTR3_OUT, PTR2_OUT, PTR1_OUT, PTR0_OUT,
+	PTS4_OUT, PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
+	PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
+	PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
+	PTV4_OUT, PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
+	PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
+	PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
+	PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
+	PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
+	PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
+	PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
+	PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
+	PTE6_FN, PTE5_FN, PTE4_FN,
+	PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
+	PTF6_FN, PTF5_FN, PTF4_FN,
+	PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
+	PTG6_FN, PTG5_FN, PTG4_FN,
+	PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
+	PTH6_FN, PTH5_FN, PTH4_FN,
+	PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
+	PTJ6_FN, PTJ5_FN, PTJ4_FN,
+	PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
+	PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
+	PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN, PTL3_FN,
+	PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
+	PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
+	PTP4_FN, PTP3_FN, PTP2_FN, PTP1_FN, PTP0_FN,
+	PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
+	PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
+	PTS4_FN, PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
+	PTT4_FN, PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
+	PTU4_FN, PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
+	PTV4_FN, PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
+
+	PSELA_1_0_00, PSELA_1_0_01, PSELA_1_0_10,
+	PSELA_3_2_00, PSELA_3_2_01, PSELA_3_2_10, PSELA_3_2_11,
+	PSELA_5_4_00, PSELA_5_4_01, PSELA_5_4_10, PSELA_5_4_11,
+	PSELA_7_6_00, PSELA_7_6_01, PSELA_7_6_10,
+	PSELA_9_8_00, PSELA_9_8_01, PSELA_9_8_10,
+	PSELA_11_10_00, PSELA_11_10_01, PSELA_11_10_10,
+	PSELA_13_12_00, PSELA_13_12_10,
+	PSELA_15_14_00, PSELA_15_14_10,
+	PSELB_9_8_00, PSELB_9_8_11,
+	PSELB_11_10_00, PSELB_11_10_01, PSELB_11_10_10, PSELB_11_10_11,
+	PSELB_13_12_00, PSELB_13_12_01, PSELB_13_12_10, PSELB_13_12_11,
+	PSELB_15_14_00, PSELB_15_14_11,
+	PSELC_9_8_00, PSELC_9_8_10,
+	PSELC_11_10_00, PSELC_11_10_10,
+	PSELC_13_12_00,	PSELC_13_12_01,	PSELC_13_12_10,
+	PSELC_15_14_00,	PSELC_15_14_01,	PSELC_15_14_10,
+	PSELD_1_0_00, PSELD_1_0_10,
+	PSELD_11_10_00,	PSELD_11_10_01,
+	PSELD_15_14_00,	PSELD_15_14_01,	PSELD_15_14_10,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	D31_MARK, D30_MARK, D29_MARK, D28_MARK,
+	D27_MARK, D26_MARK, D25_MARK, D24_MARK,
+	D23_MARK, D22_MARK, D21_MARK, D20_MARK,
+	D19_MARK, D18_MARK, D17_MARK, D16_MARK,
+	IOIS16_MARK, RAS_MARK, CAS_MARK, CKE_MARK,
+	CS5B_CE1A_MARK, CS6B_CE1B_MARK,
+	A25_MARK, A24_MARK, A23_MARK, A22_MARK,
+	A21_MARK, A20_MARK, A19_MARK, A0_MARK,
+	REFOUT_MARK, IRQOUT_MARK,
+	LCD_DATA15_MARK, LCD_DATA14_MARK,
+	LCD_DATA13_MARK, LCD_DATA12_MARK,
+	LCD_DATA11_MARK, LCD_DATA10_MARK,
+	LCD_DATA9_MARK, LCD_DATA8_MARK,
+	LCD_DATA7_MARK, LCD_DATA6_MARK,
+	LCD_DATA5_MARK, LCD_DATA4_MARK,
+	LCD_DATA3_MARK, LCD_DATA2_MARK,
+	LCD_DATA1_MARK, LCD_DATA0_MARK,
+	LCD_M_DISP_MARK,
+	LCD_CL1_MARK, LCD_CL2_MARK,
+	LCD_DON_MARK, LCD_FLM_MARK,
+	LCD_VEPWC_MARK, LCD_VCPWC_MARK,
+	AFE_RXIN_MARK, AFE_RDET_MARK,
+	AFE_FS_MARK, AFE_TXOUT_MARK,
+	AFE_SCLK_MARK, AFE_RLYCNT_MARK,
+	AFE_HC1_MARK,
+	IIC_SCL_MARK, IIC_SDA_MARK,
+	DA1_MARK, DA0_MARK,
+	AN3_MARK, AN2_MARK, AN1_MARK, AN0_MARK, ADTRG_MARK,
+	USB1D_RCV_MARK, USB1D_TXSE0_MARK,
+	USB1D_TXDPLS_MARK, USB1D_DMNS_MARK,
+	USB1D_DPLS_MARK, USB1D_SPEED_MARK,
+	USB1D_TXENL_MARK,
+	USB2_PWR_EN_MARK, USB1_PWR_EN_USBF_UPLUP_MARK, USB1D_SUSPEND_MARK,
+	IRQ5_MARK, IRQ4_MARK,
+	IRQ3_IRL3_MARK, IRQ2_IRL2_MARK,
+	IRQ1_IRL1_MARK, IRQ0_IRL0_MARK,
+	PCC_REG_MARK, PCC_DRV_MARK,
+	PCC_BVD2_MARK, PCC_BVD1_MARK,
+	PCC_CD2_MARK, PCC_CD1_MARK,
+	PCC_RESET_MARK, PCC_RDY_MARK,
+	PCC_VS2_MARK, PCC_VS1_MARK,
+	AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
+	AUDCK_MARK, AUDSYNC_MARK, ASEBRKAK_MARK, TRST_MARK,
+	TMS_MARK, TDO_MARK, TDI_MARK, TCK_MARK,
+	DACK1_MARK, DREQ1_MARK, DACK0_MARK, DREQ0_MARK,
+	TEND1_MARK, TEND0_MARK,
+	SIOF0_SYNC_MARK, SIOF0_MCLK_MARK,
+	SIOF0_TXD_MARK, SIOF0_RXD_MARK,
+	SIOF0_SCK_MARK,
+	SIOF1_SYNC_MARK, SIOF1_MCLK_MARK,
+	SIOF1_TXD_MARK, SIOF1_RXD_MARK,
+	SIOF1_SCK_MARK,
+	SCIF0_TXD_MARK, SCIF0_RXD_MARK,
+	SCIF0_RTS_MARK, SCIF0_CTS_MARK, SCIF0_SCK_MARK,
+	SCIF1_TXD_MARK, SCIF1_RXD_MARK,
+	SCIF1_RTS_MARK, SCIF1_CTS_MARK, SCIF1_SCK_MARK,
+	TPU_TO1_MARK, TPU_TO0_MARK,
+	TPU_TI3B_MARK, TPU_TI3A_MARK,
+	TPU_TI2B_MARK, TPU_TI2A_MARK,
+	TPU_TO3_MARK, TPU_TO2_MARK,
+	SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
+	MMC_DAT_MARK, MMC_CMD_MARK,
+	MMC_CLK_MARK, MMC_VDDON_MARK,
+	MMC_ODMOD_MARK,
+	STATUS0_MARK, STATUS1_MARK,
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+	/* PTA GPIO */
+	PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT, PTA7_IN_PU),
+	PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT, PTA6_IN_PU),
+	PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT, PTA5_IN_PU),
+	PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT, PTA4_IN_PU),
+	PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT, PTA3_IN_PU),
+	PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT, PTA2_IN_PU),
+	PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT, PTA1_IN_PU),
+	PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT, PTA0_IN_PU),
+
+	/* PTB GPIO */
+	PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT, PTB7_IN_PU),
+	PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT, PTB6_IN_PU),
+	PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT, PTB5_IN_PU),
+	PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT, PTB4_IN_PU),
+	PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT, PTB3_IN_PU),
+	PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT, PTB2_IN_PU),
+	PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT, PTB1_IN_PU),
+	PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT, PTB0_IN_PU),
+
+	/* PTC GPIO */
+	PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT, PTC7_IN_PU),
+	PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT, PTC6_IN_PU),
+	PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT, PTC5_IN_PU),
+	PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT, PTC4_IN_PU),
+	PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT, PTC3_IN_PU),
+	PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT, PTC2_IN_PU),
+	PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT, PTC1_IN_PU),
+	PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT, PTC0_IN_PU),
+
+	/* PTD GPIO */
+	PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT, PTD7_IN_PU),
+	PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT, PTD6_IN_PU),
+	PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT, PTD5_IN_PU),
+	PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT, PTD4_IN_PU),
+	PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT, PTD3_IN_PU),
+	PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT, PTD2_IN_PU),
+	PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT, PTD1_IN_PU),
+	PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT, PTD0_IN_PU),
+
+	/* PTE GPIO */
+	PINMUX_DATA(PTE6_DATA, PTE6_IN),
+	PINMUX_DATA(PTE5_DATA, PTE5_IN),
+	PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT, PTE4_IN_PU),
+	PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT, PTE3_IN_PU),
+	PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT, PTE2_IN_PU),
+	PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT, PTE1_IN_PU),
+	PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT, PTE0_IN_PU),
+
+	/* PTF GPIO */
+	PINMUX_DATA(PTF6_DATA, PTF6_IN),
+	PINMUX_DATA(PTF5_DATA, PTF5_IN),
+	PINMUX_DATA(PTF4_DATA, PTF4_IN),
+	PINMUX_DATA(PTF3_DATA, PTF3_IN),
+	PINMUX_DATA(PTF2_DATA, PTF2_IN),
+	PINMUX_DATA(PTF1_DATA, PTF1_IN),
+	PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT, PTF0_IN_PU),
+
+	/* PTG GPIO */
+	PINMUX_DATA(PTG6_DATA, PTG6_IN, PTG6_OUT, PTG6_IN_PU),
+	PINMUX_DATA(PTG5_DATA, PTG5_IN, PTG5_OUT, PTG5_IN_PU),
+	PINMUX_DATA(PTG4_DATA, PTG4_IN, PTG4_OUT, PTG4_IN_PU),
+	PINMUX_DATA(PTG3_DATA, PTG3_IN, PTG3_OUT, PTG3_IN_PU),
+	PINMUX_DATA(PTG2_DATA, PTG2_IN, PTG2_OUT, PTG2_IN_PU),
+	PINMUX_DATA(PTG1_DATA, PTG1_IN, PTG1_OUT, PTG1_IN_PU),
+	PINMUX_DATA(PTG0_DATA, PTG0_IN, PTG0_OUT, PTG0_IN_PU),
+
+	/* PTH GPIO */
+	PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT, PTH6_IN_PU),
+	PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT, PTH5_IN_PU),
+	PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT, PTH4_IN_PU),
+	PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT, PTH3_IN_PU),
+	PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT, PTH2_IN_PU),
+	PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT, PTH1_IN_PU),
+	PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT, PTH0_IN_PU),
+
+	/* PTJ GPIO */
+	PINMUX_DATA(PTJ6_DATA, PTJ6_IN, PTJ6_OUT, PTJ6_IN_PU),
+	PINMUX_DATA(PTJ5_DATA, PTJ5_IN, PTJ5_OUT, PTJ5_IN_PU),
+	PINMUX_DATA(PTJ4_DATA, PTJ4_IN, PTJ4_OUT, PTJ4_IN_PU),
+	PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT, PTJ3_IN_PU),
+	PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT, PTJ2_IN_PU),
+	PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT, PTJ1_IN_PU),
+	PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT, PTJ0_IN_PU),
+
+	/* PTK GPIO */
+	PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT, PTK3_IN_PU),
+	PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT, PTK2_IN_PU),
+	PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT, PTK1_IN_PU),
+	PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT, PTK0_IN_PU),
+
+	/* PTL GPIO */
+	PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT, PTL7_IN_PU),
+	PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT, PTL6_IN_PU),
+	PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT, PTL5_IN_PU),
+	PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT, PTL4_IN_PU),
+	PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT, PTL3_IN_PU),
+
+	/* PTM GPIO */
+	PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT, PTM7_IN_PU),
+	PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT, PTM6_IN_PU),
+	PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT, PTM5_IN_PU),
+	PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT, PTM4_IN_PU),
+	PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT, PTM3_IN_PU),
+	PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT, PTM2_IN_PU),
+	PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT, PTM1_IN_PU),
+	PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT, PTM0_IN_PU),
+
+	/* PTP GPIO */
+	PINMUX_DATA(PTP4_DATA, PTP4_IN, PTP4_OUT, PTP4_IN_PU),
+	PINMUX_DATA(PTP3_DATA, PTP3_IN, PTP3_OUT, PTP3_IN_PU),
+	PINMUX_DATA(PTP2_DATA, PTP2_IN, PTP2_OUT, PTP2_IN_PU),
+	PINMUX_DATA(PTP1_DATA, PTP1_IN, PTP1_OUT, PTP1_IN_PU),
+	PINMUX_DATA(PTP0_DATA, PTP0_IN, PTP0_OUT, PTP0_IN_PU),
+
+	/* PTR GPIO */
+	PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT, PTR7_IN_PU),
+	PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT, PTR6_IN_PU),
+	PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT, PTR5_IN_PU),
+	PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT, PTR4_IN_PU),
+	PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_OUT, PTR3_IN_PU),
+	PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_OUT, PTR2_IN_PU),
+	PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT, PTR1_IN_PU),
+	PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT, PTR0_IN_PU),
+
+	/* PTS GPIO */
+	PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT, PTS4_IN_PU),
+	PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT, PTS3_IN_PU),
+	PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT, PTS2_IN_PU),
+	PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT, PTS1_IN_PU),
+	PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT, PTS0_IN_PU),
+
+	/* PTT GPIO */
+	PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT, PTT4_IN_PU),
+	PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT, PTT3_IN_PU),
+	PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT, PTT2_IN_PU),
+	PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT, PTT1_IN_PU),
+	PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT, PTT0_IN_PU),
+
+	/* PTU GPIO */
+	PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT, PTU4_IN_PU),
+	PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT, PTU3_IN_PU),
+	PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT, PTU2_IN_PU),
+	PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT, PTU1_IN_PU),
+	PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT, PTU0_IN_PU),
+
+	/* PTV GPIO */
+	PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT, PTV4_IN_PU),
+	PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT, PTV3_IN_PU),
+	PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT, PTV2_IN_PU),
+	PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT, PTV1_IN_PU),
+	PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT, PTV0_IN_PU),
+
+	/* PTA FN */
+	PINMUX_DATA(D23_MARK, PTA7_FN),
+	PINMUX_DATA(D22_MARK, PTA6_FN),
+	PINMUX_DATA(D21_MARK, PTA5_FN),
+	PINMUX_DATA(D20_MARK, PTA4_FN),
+	PINMUX_DATA(D19_MARK, PTA3_FN),
+	PINMUX_DATA(D18_MARK, PTA2_FN),
+	PINMUX_DATA(D17_MARK, PTA1_FN),
+	PINMUX_DATA(D16_MARK, PTA0_FN),
+
+	/* PTB FN */
+	PINMUX_DATA(D31_MARK, PTB7_FN),
+	PINMUX_DATA(D30_MARK, PTB6_FN),
+	PINMUX_DATA(D29_MARK, PTB5_FN),
+	PINMUX_DATA(D28_MARK, PTB4_FN),
+	PINMUX_DATA(D27_MARK, PTB3_FN),
+	PINMUX_DATA(D26_MARK, PTB2_FN),
+	PINMUX_DATA(D25_MARK, PTB1_FN),
+	PINMUX_DATA(D24_MARK, PTB0_FN),
+
+	/* PTC FN */
+	PINMUX_DATA(LCD_DATA7_MARK, PTC7_FN),
+	PINMUX_DATA(LCD_DATA6_MARK, PTC6_FN),
+	PINMUX_DATA(LCD_DATA5_MARK, PTC5_FN),
+	PINMUX_DATA(LCD_DATA4_MARK, PTC4_FN),
+	PINMUX_DATA(LCD_DATA3_MARK, PTC3_FN),
+	PINMUX_DATA(LCD_DATA2_MARK, PTC2_FN),
+	PINMUX_DATA(LCD_DATA1_MARK, PTC1_FN),
+	PINMUX_DATA(LCD_DATA0_MARK, PTC0_FN),
+
+	/* PTD FN */
+	PINMUX_DATA(LCD_DATA15_MARK, PTD7_FN),
+	PINMUX_DATA(LCD_DATA14_MARK, PTD6_FN),
+	PINMUX_DATA(LCD_DATA13_MARK, PTD5_FN),
+	PINMUX_DATA(LCD_DATA12_MARK, PTD4_FN),
+	PINMUX_DATA(LCD_DATA11_MARK, PTD3_FN),
+	PINMUX_DATA(LCD_DATA10_MARK, PTD2_FN),
+	PINMUX_DATA(LCD_DATA9_MARK, PTD1_FN),
+	PINMUX_DATA(LCD_DATA8_MARK, PTD0_FN),
+
+	/* PTE FN */
+	PINMUX_DATA(IIC_SCL_MARK, PSELB_9_8_00, PTE6_FN),
+	PINMUX_DATA(AFE_RXIN_MARK, PSELB_9_8_11, PTE6_FN),
+	PINMUX_DATA(IIC_SDA_MARK, PSELB_9_8_00, PTE5_FN),
+	PINMUX_DATA(AFE_RDET_MARK, PSELB_9_8_11, PTE5_FN),
+	PINMUX_DATA(LCD_M_DISP_MARK, PTE4_FN),
+	PINMUX_DATA(LCD_CL1_MARK, PTE3_FN),
+	PINMUX_DATA(LCD_CL2_MARK, PTE2_FN),
+	PINMUX_DATA(LCD_DON_MARK, PTE1_FN),
+	PINMUX_DATA(LCD_FLM_MARK, PTE0_FN),
+
+	/* PTF FN */
+	PINMUX_DATA(DA1_MARK, PTF6_FN),
+	PINMUX_DATA(DA0_MARK, PTF5_FN),
+	PINMUX_DATA(AN3_MARK, PTF4_FN),
+	PINMUX_DATA(AN2_MARK, PTF3_FN),
+	PINMUX_DATA(AN1_MARK, PTF2_FN),
+	PINMUX_DATA(AN0_MARK, PTF1_FN),
+	PINMUX_DATA(ADTRG_MARK, PTF0_FN),
+
+	/* PTG FN */
+	PINMUX_DATA(USB1D_RCV_MARK, PSELA_3_2_00, PTG6_FN),
+	PINMUX_DATA(AFE_FS_MARK, PSELA_3_2_01, PTG6_FN),
+	PINMUX_DATA(PCC_REG_MARK, PSELA_3_2_10, PTG6_FN),
+	PINMUX_DATA(IRQ5_MARK, PSELA_3_2_11, PTG6_FN),
+	PINMUX_DATA(USB1D_TXSE0_MARK, PSELA_5_4_00, PTG5_FN),
+	PINMUX_DATA(AFE_TXOUT_MARK, PSELA_5_4_01, PTG5_FN),
+	PINMUX_DATA(PCC_DRV_MARK, PSELA_5_4_10, PTG5_FN),
+	PINMUX_DATA(IRQ4_MARK, PSELA_5_4_11, PTG5_FN),
+	PINMUX_DATA(USB1D_TXDPLS_MARK, PSELA_7_6_00, PTG4_FN),
+	PINMUX_DATA(AFE_SCLK_MARK, PSELA_7_6_01, PTG4_FN),
+	PINMUX_DATA(IOIS16_MARK, PSELA_7_6_10, PTG4_FN),
+	PINMUX_DATA(USB1D_DMNS_MARK, PSELA_9_8_00, PTG3_FN),
+	PINMUX_DATA(AFE_RLYCNT_MARK, PSELA_9_8_01, PTG3_FN),
+	PINMUX_DATA(PCC_BVD2_MARK, PSELA_9_8_10, PTG3_FN),
+	PINMUX_DATA(USB1D_DPLS_MARK, PSELA_11_10_00, PTG2_FN),
+	PINMUX_DATA(AFE_HC1_MARK, PSELA_11_10_01, PTG2_FN),
+	PINMUX_DATA(PCC_BVD1_MARK, PSELA_11_10_10, PTG2_FN),
+	PINMUX_DATA(USB1D_SPEED_MARK, PSELA_13_12_00, PTG1_FN),
+	PINMUX_DATA(PCC_CD2_MARK, PSELA_13_12_10, PTG1_FN),
+	PINMUX_DATA(USB1D_TXENL_MARK, PSELA_15_14_00, PTG0_FN),
+	PINMUX_DATA(PCC_CD1_MARK, PSELA_15_14_10, PTG0_FN),
+
+	/* PTH FN */
+	PINMUX_DATA(RAS_MARK, PTH6_FN),
+	PINMUX_DATA(CAS_MARK, PTH5_FN),
+	PINMUX_DATA(CKE_MARK, PTH4_FN),
+	PINMUX_DATA(STATUS1_MARK, PTH3_FN),
+	PINMUX_DATA(STATUS0_MARK, PTH2_FN),
+	PINMUX_DATA(USB2_PWR_EN_MARK, PTH1_FN),
+	PINMUX_DATA(USB1_PWR_EN_USBF_UPLUP_MARK, PTH0_FN),
+
+	/* PTJ FN */
+	PINMUX_DATA(AUDCK_MARK, PTJ6_FN),
+	PINMUX_DATA(ASEBRKAK_MARK, PTJ5_FN),
+	PINMUX_DATA(AUDATA3_MARK, PTJ4_FN),
+	PINMUX_DATA(AUDATA2_MARK, PTJ3_FN),
+	PINMUX_DATA(AUDATA1_MARK, PTJ2_FN),
+	PINMUX_DATA(AUDATA0_MARK, PTJ1_FN),
+	PINMUX_DATA(AUDSYNC_MARK, PTJ0_FN),
+
+	/* PTK FN */
+	PINMUX_DATA(PCC_RESET_MARK, PTK3_FN),
+	PINMUX_DATA(PCC_RDY_MARK, PTK2_FN),
+	PINMUX_DATA(PCC_VS2_MARK, PTK1_FN),
+	PINMUX_DATA(PCC_VS1_MARK, PTK0_FN),
+
+	/* PTL FN */
+	PINMUX_DATA(TRST_MARK, PTL7_FN),
+	PINMUX_DATA(TMS_MARK, PTL6_FN),
+	PINMUX_DATA(TDO_MARK, PTL5_FN),
+	PINMUX_DATA(TDI_MARK, PTL4_FN),
+	PINMUX_DATA(TCK_MARK, PTL3_FN),
+
+	/* PTM FN */
+	PINMUX_DATA(DREQ1_MARK, PTM7_FN),
+	PINMUX_DATA(DREQ0_MARK, PTM6_FN),
+	PINMUX_DATA(DACK1_MARK, PTM5_FN),
+	PINMUX_DATA(DACK0_MARK, PTM4_FN),
+	PINMUX_DATA(TEND1_MARK, PTM3_FN),
+	PINMUX_DATA(TEND0_MARK, PTM2_FN),
+	PINMUX_DATA(CS5B_CE1A_MARK, PTM1_FN),
+	PINMUX_DATA(CS6B_CE1B_MARK, PTM0_FN),
+
+	/* PTP FN */
+	PINMUX_DATA(USB1D_SUSPEND_MARK, PSELA_1_0_00, PTP4_FN),
+	PINMUX_DATA(REFOUT_MARK, PSELA_1_0_01, PTP4_FN),
+	PINMUX_DATA(IRQOUT_MARK, PSELA_1_0_10, PTP4_FN),
+	PINMUX_DATA(IRQ3_IRL3_MARK, PTP3_FN),
+	PINMUX_DATA(IRQ2_IRL2_MARK, PTP2_FN),
+	PINMUX_DATA(IRQ1_IRL1_MARK, PTP1_FN),
+	PINMUX_DATA(IRQ0_IRL0_MARK, PTP0_FN),
+
+	/* PTR FN */
+	PINMUX_DATA(A25_MARK, PTR7_FN),
+	PINMUX_DATA(A24_MARK, PTR6_FN),
+	PINMUX_DATA(A23_MARK, PTR5_FN),
+	PINMUX_DATA(A22_MARK, PTR4_FN),
+	PINMUX_DATA(A21_MARK, PTR3_FN),
+	PINMUX_DATA(A20_MARK, PTR2_FN),
+	PINMUX_DATA(A19_MARK, PTR1_FN),
+	PINMUX_DATA(A0_MARK, PTR0_FN),
+
+	/* PTS FN */
+	PINMUX_DATA(SIOF0_SYNC_MARK, PTS4_FN),
+	PINMUX_DATA(SIOF0_MCLK_MARK, PTS3_FN),
+	PINMUX_DATA(SIOF0_TXD_MARK, PTS2_FN),
+	PINMUX_DATA(SIOF0_RXD_MARK, PTS1_FN),
+	PINMUX_DATA(SIOF0_SCK_MARK, PTS0_FN),
+
+	/* PTT FN */
+	PINMUX_DATA(SCIF0_CTS_MARK, PSELB_15_14_00, PTT4_FN),
+	PINMUX_DATA(TPU_TO1_MARK, PSELB_15_14_11, PTT4_FN),
+	PINMUX_DATA(SCIF0_RTS_MARK, PSELB_15_14_00, PTT3_FN),
+	PINMUX_DATA(TPU_TO0_MARK, PSELB_15_14_11, PTT3_FN),
+	PINMUX_DATA(SCIF0_TXD_MARK, PTT2_FN),
+	PINMUX_DATA(SCIF0_RXD_MARK, PTT1_FN),
+	PINMUX_DATA(SCIF0_SCK_MARK, PTT0_FN),
+
+	/* PTU FN */
+	PINMUX_DATA(SIOF1_SYNC_MARK, PTU4_FN),
+	PINMUX_DATA(SIOF1_MCLK_MARK, PSELD_11_10_00, PTU3_FN),
+	PINMUX_DATA(TPU_TI3B_MARK, PSELD_11_10_01, PTU3_FN),
+	PINMUX_DATA(SIOF1_TXD_MARK, PSELD_15_14_00, PTU2_FN),
+	PINMUX_DATA(TPU_TI3A_MARK, PSELD_15_14_01, PTU2_FN),
+	PINMUX_DATA(MMC_DAT_MARK, PSELD_15_14_10, PTU2_FN),
+	PINMUX_DATA(SIOF1_RXD_MARK, PSELC_13_12_00, PTU1_FN),
+	PINMUX_DATA(TPU_TI2B_MARK, PSELC_13_12_01, PTU1_FN),
+	PINMUX_DATA(MMC_CMD_MARK, PSELC_13_12_10, PTU1_FN),
+	PINMUX_DATA(SIOF1_SCK_MARK, PSELC_15_14_00, PTU0_FN),
+	PINMUX_DATA(TPU_TI2A_MARK, PSELC_15_14_01, PTU0_FN),
+	PINMUX_DATA(MMC_CLK_MARK, PSELC_15_14_10, PTU0_FN),
+
+	/* PTV FN */
+	PINMUX_DATA(SCIF1_CTS_MARK, PSELB_11_10_00, PTV4_FN),
+	PINMUX_DATA(TPU_TO3_MARK, PSELB_11_10_01, PTV4_FN),
+	PINMUX_DATA(MMC_VDDON_MARK, PSELB_11_10_10, PTV4_FN),
+	PINMUX_DATA(LCD_VEPWC_MARK, PSELB_11_10_11, PTV4_FN),
+	PINMUX_DATA(SCIF1_RTS_MARK, PSELB_13_12_00, PTV3_FN),
+	PINMUX_DATA(TPU_TO2_MARK, PSELB_13_12_01, PTV3_FN),
+	PINMUX_DATA(MMC_ODMOD_MARK, PSELB_13_12_10, PTV3_FN),
+	PINMUX_DATA(LCD_VCPWC_MARK, PSELB_13_12_11, PTV3_FN),
+	PINMUX_DATA(SCIF1_TXD_MARK, PSELC_9_8_00, PTV2_FN),
+	PINMUX_DATA(SIM_D_MARK, PSELC_9_8_10, PTV2_FN),
+	PINMUX_DATA(SCIF1_RXD_MARK, PSELC_11_10_00, PTV1_FN),
+	PINMUX_DATA(SIM_RST_MARK, PSELC_11_10_10, PTV1_FN),
+	PINMUX_DATA(SCIF1_SCK_MARK, PSELD_1_0_00, PTV0_FN),
+	PINMUX_DATA(SIM_CLK_MARK, PSELD_1_0_10, PTV0_FN),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* PTA */
+	PINMUX_GPIO(GPIO_PTA7, PTA7_DATA),
+	PINMUX_GPIO(GPIO_PTA6, PTA6_DATA),
+	PINMUX_GPIO(GPIO_PTA5, PTA5_DATA),
+	PINMUX_GPIO(GPIO_PTA4, PTA4_DATA),
+	PINMUX_GPIO(GPIO_PTA3, PTA3_DATA),
+	PINMUX_GPIO(GPIO_PTA2, PTA2_DATA),
+	PINMUX_GPIO(GPIO_PTA1, PTA1_DATA),
+	PINMUX_GPIO(GPIO_PTA0, PTA0_DATA),
+
+	/* PTB */
+	PINMUX_GPIO(GPIO_PTB7, PTB7_DATA),
+	PINMUX_GPIO(GPIO_PTB6, PTB6_DATA),
+	PINMUX_GPIO(GPIO_PTB5, PTB5_DATA),
+	PINMUX_GPIO(GPIO_PTB4, PTB4_DATA),
+	PINMUX_GPIO(GPIO_PTB3, PTB3_DATA),
+	PINMUX_GPIO(GPIO_PTB2, PTB2_DATA),
+	PINMUX_GPIO(GPIO_PTB1, PTB1_DATA),
+	PINMUX_GPIO(GPIO_PTB0, PTB0_DATA),
+
+	/* PTC */
+	PINMUX_GPIO(GPIO_PTC7, PTC7_DATA),
+	PINMUX_GPIO(GPIO_PTC6, PTC6_DATA),
+	PINMUX_GPIO(GPIO_PTC5, PTC5_DATA),
+	PINMUX_GPIO(GPIO_PTC4, PTC4_DATA),
+	PINMUX_GPIO(GPIO_PTC3, PTC3_DATA),
+	PINMUX_GPIO(GPIO_PTC2, PTC2_DATA),
+	PINMUX_GPIO(GPIO_PTC1, PTC1_DATA),
+	PINMUX_GPIO(GPIO_PTC0, PTC0_DATA),
+
+	/* PTD */
+	PINMUX_GPIO(GPIO_PTD7, PTD7_DATA),
+	PINMUX_GPIO(GPIO_PTD6, PTD6_DATA),
+	PINMUX_GPIO(GPIO_PTD5, PTD5_DATA),
+	PINMUX_GPIO(GPIO_PTD4, PTD4_DATA),
+	PINMUX_GPIO(GPIO_PTD3, PTD3_DATA),
+	PINMUX_GPIO(GPIO_PTD2, PTD2_DATA),
+	PINMUX_GPIO(GPIO_PTD1, PTD1_DATA),
+	PINMUX_GPIO(GPIO_PTD0, PTD0_DATA),
+
+	/* PTE */
+	PINMUX_GPIO(GPIO_PTE6, PTE6_DATA),
+	PINMUX_GPIO(GPIO_PTE5, PTE5_DATA),
+	PINMUX_GPIO(GPIO_PTE4, PTE4_DATA),
+	PINMUX_GPIO(GPIO_PTE3, PTE3_DATA),
+	PINMUX_GPIO(GPIO_PTE2, PTE2_DATA),
+	PINMUX_GPIO(GPIO_PTE1, PTE1_DATA),
+	PINMUX_GPIO(GPIO_PTE0, PTE0_DATA),
+
+	/* PTF */
+	PINMUX_GPIO(GPIO_PTF6, PTF6_DATA),
+	PINMUX_GPIO(GPIO_PTF5, PTF5_DATA),
+	PINMUX_GPIO(GPIO_PTF4, PTF4_DATA),
+	PINMUX_GPIO(GPIO_PTF3, PTF3_DATA),
+	PINMUX_GPIO(GPIO_PTF2, PTF2_DATA),
+	PINMUX_GPIO(GPIO_PTF1, PTF1_DATA),
+	PINMUX_GPIO(GPIO_PTF0, PTF0_DATA),
+
+	/* PTG */
+	PINMUX_GPIO(GPIO_PTG6, PTG6_DATA),
+	PINMUX_GPIO(GPIO_PTG5, PTG5_DATA),
+	PINMUX_GPIO(GPIO_PTG4, PTG4_DATA),
+	PINMUX_GPIO(GPIO_PTG3, PTG3_DATA),
+	PINMUX_GPIO(GPIO_PTG2, PTG2_DATA),
+	PINMUX_GPIO(GPIO_PTG1, PTG1_DATA),
+	PINMUX_GPIO(GPIO_PTG0, PTG0_DATA),
+
+	/* PTH */
+	PINMUX_GPIO(GPIO_PTH6, PTH6_DATA),
+	PINMUX_GPIO(GPIO_PTH5, PTH5_DATA),
+	PINMUX_GPIO(GPIO_PTH4, PTH4_DATA),
+	PINMUX_GPIO(GPIO_PTH3, PTH3_DATA),
+	PINMUX_GPIO(GPIO_PTH2, PTH2_DATA),
+	PINMUX_GPIO(GPIO_PTH1, PTH1_DATA),
+	PINMUX_GPIO(GPIO_PTH0, PTH0_DATA),
+
+	/* PTJ */
+	PINMUX_GPIO(GPIO_PTJ6, PTJ6_DATA),
+	PINMUX_GPIO(GPIO_PTJ5, PTJ5_DATA),
+	PINMUX_GPIO(GPIO_PTJ4, PTJ4_DATA),
+	PINMUX_GPIO(GPIO_PTJ3, PTJ3_DATA),
+	PINMUX_GPIO(GPIO_PTJ2, PTJ2_DATA),
+	PINMUX_GPIO(GPIO_PTJ1, PTJ1_DATA),
+	PINMUX_GPIO(GPIO_PTJ0, PTJ0_DATA),
+
+	/* PTK */
+	PINMUX_GPIO(GPIO_PTK3, PTK3_DATA),
+	PINMUX_GPIO(GPIO_PTK2, PTK2_DATA),
+	PINMUX_GPIO(GPIO_PTK1, PTK1_DATA),
+	PINMUX_GPIO(GPIO_PTK0, PTK0_DATA),
+
+	/* PTL */
+	PINMUX_GPIO(GPIO_PTL7, PTL7_DATA),
+	PINMUX_GPIO(GPIO_PTL6, PTL6_DATA),
+	PINMUX_GPIO(GPIO_PTL5, PTL5_DATA),
+	PINMUX_GPIO(GPIO_PTL4, PTL4_DATA),
+	PINMUX_GPIO(GPIO_PTL3, PTL3_DATA),
+
+	/* PTM */
+	PINMUX_GPIO(GPIO_PTM7, PTM7_DATA),
+	PINMUX_GPIO(GPIO_PTM6, PTM6_DATA),
+	PINMUX_GPIO(GPIO_PTM5, PTM5_DATA),
+	PINMUX_GPIO(GPIO_PTM4, PTM4_DATA),
+	PINMUX_GPIO(GPIO_PTM3, PTM3_DATA),
+	PINMUX_GPIO(GPIO_PTM2, PTM2_DATA),
+	PINMUX_GPIO(GPIO_PTM1, PTM1_DATA),
+	PINMUX_GPIO(GPIO_PTM0, PTM0_DATA),
+
+	/* PTP */
+	PINMUX_GPIO(GPIO_PTP4, PTP4_DATA),
+	PINMUX_GPIO(GPIO_PTP3, PTP3_DATA),
+	PINMUX_GPIO(GPIO_PTP2, PTP2_DATA),
+	PINMUX_GPIO(GPIO_PTP1, PTP1_DATA),
+	PINMUX_GPIO(GPIO_PTP0, PTP0_DATA),
+
+	/* PTR */
+	PINMUX_GPIO(GPIO_PTR7, PTR7_DATA),
+	PINMUX_GPIO(GPIO_PTR6, PTR6_DATA),
+	PINMUX_GPIO(GPIO_PTR5, PTR5_DATA),
+	PINMUX_GPIO(GPIO_PTR4, PTR4_DATA),
+	PINMUX_GPIO(GPIO_PTR3, PTR3_DATA),
+	PINMUX_GPIO(GPIO_PTR2, PTR2_DATA),
+	PINMUX_GPIO(GPIO_PTR1, PTR1_DATA),
+	PINMUX_GPIO(GPIO_PTR0, PTR0_DATA),
+
+	/* PTS */
+	PINMUX_GPIO(GPIO_PTS4, PTS4_DATA),
+	PINMUX_GPIO(GPIO_PTS3, PTS3_DATA),
+	PINMUX_GPIO(GPIO_PTS2, PTS2_DATA),
+	PINMUX_GPIO(GPIO_PTS1, PTS1_DATA),
+	PINMUX_GPIO(GPIO_PTS0, PTS0_DATA),
+
+	/* PTT */
+	PINMUX_GPIO(GPIO_PTT4, PTT4_DATA),
+	PINMUX_GPIO(GPIO_PTT3, PTT3_DATA),
+	PINMUX_GPIO(GPIO_PTT2, PTT2_DATA),
+	PINMUX_GPIO(GPIO_PTT1, PTT1_DATA),
+	PINMUX_GPIO(GPIO_PTT0, PTT0_DATA),
+
+	/* PTU */
+	PINMUX_GPIO(GPIO_PTU4, PTU4_DATA),
+	PINMUX_GPIO(GPIO_PTU3, PTU3_DATA),
+	PINMUX_GPIO(GPIO_PTU2, PTU2_DATA),
+	PINMUX_GPIO(GPIO_PTU1, PTU1_DATA),
+	PINMUX_GPIO(GPIO_PTU0, PTU0_DATA),
+
+	/* PTV */
+	PINMUX_GPIO(GPIO_PTV4, PTV4_DATA),
+	PINMUX_GPIO(GPIO_PTV3, PTV3_DATA),
+	PINMUX_GPIO(GPIO_PTV2, PTV2_DATA),
+	PINMUX_GPIO(GPIO_PTV1, PTV1_DATA),
+	PINMUX_GPIO(GPIO_PTV0, PTV0_DATA),
+
+	/* BSC */
+	PINMUX_GPIO(GPIO_FN_D31, D31_MARK),
+	PINMUX_GPIO(GPIO_FN_D30, D30_MARK),
+	PINMUX_GPIO(GPIO_FN_D29, D29_MARK),
+	PINMUX_GPIO(GPIO_FN_D28, D28_MARK),
+	PINMUX_GPIO(GPIO_FN_D27, D27_MARK),
+	PINMUX_GPIO(GPIO_FN_D26, D26_MARK),
+	PINMUX_GPIO(GPIO_FN_D25, D25_MARK),
+	PINMUX_GPIO(GPIO_FN_D24, D24_MARK),
+	PINMUX_GPIO(GPIO_FN_D23, D23_MARK),
+	PINMUX_GPIO(GPIO_FN_D22, D22_MARK),
+	PINMUX_GPIO(GPIO_FN_D21, D21_MARK),
+	PINMUX_GPIO(GPIO_FN_D20, D20_MARK),
+	PINMUX_GPIO(GPIO_FN_D19, D19_MARK),
+	PINMUX_GPIO(GPIO_FN_D18, D18_MARK),
+	PINMUX_GPIO(GPIO_FN_D17, D17_MARK),
+	PINMUX_GPIO(GPIO_FN_D16, D16_MARK),
+	PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK),
+	PINMUX_GPIO(GPIO_FN_RAS, RAS_MARK),
+	PINMUX_GPIO(GPIO_FN_CAS, CAS_MARK),
+	PINMUX_GPIO(GPIO_FN_CKE, CKE_MARK),
+	PINMUX_GPIO(GPIO_FN_CS5B_CE1A, CS5B_CE1A_MARK),
+	PINMUX_GPIO(GPIO_FN_CS6B_CE1B, CS6B_CE1B_MARK),
+	PINMUX_GPIO(GPIO_FN_A25, A25_MARK),
+	PINMUX_GPIO(GPIO_FN_A24, A24_MARK),
+	PINMUX_GPIO(GPIO_FN_A23, A23_MARK),
+	PINMUX_GPIO(GPIO_FN_A22, A22_MARK),
+	PINMUX_GPIO(GPIO_FN_A21, A21_MARK),
+	PINMUX_GPIO(GPIO_FN_A20, A20_MARK),
+	PINMUX_GPIO(GPIO_FN_A19, A19_MARK),
+	PINMUX_GPIO(GPIO_FN_A0, A0_MARK),
+	PINMUX_GPIO(GPIO_FN_REFOUT, REFOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQOUT, IRQOUT_MARK),
+
+	/* LCDC */
+	PINMUX_GPIO(GPIO_FN_LCD_DATA15, LCD_DATA15_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA14, LCD_DATA14_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA13, LCD_DATA13_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA12, LCD_DATA12_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA11, LCD_DATA11_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA10, LCD_DATA10_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA9, LCD_DATA9_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA8, LCD_DATA8_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA7, LCD_DATA7_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA6, LCD_DATA6_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA5, LCD_DATA5_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA4, LCD_DATA4_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA3, LCD_DATA3_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA2, LCD_DATA2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA1, LCD_DATA1_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA0, LCD_DATA0_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_M_DISP, LCD_M_DISP_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_CL1, LCD_CL1_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_CL2, LCD_CL2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DON, LCD_DON_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_FLM, LCD_FLM_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_VEPWC, LCD_VEPWC_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_VCPWC, LCD_VCPWC_MARK),
+
+	/* AFEIF */
+	PINMUX_GPIO(GPIO_FN_AFE_RXIN, AFE_RXIN_MARK),
+	PINMUX_GPIO(GPIO_FN_AFE_RDET, AFE_RDET_MARK),
+	PINMUX_GPIO(GPIO_FN_AFE_FS, AFE_FS_MARK),
+	PINMUX_GPIO(GPIO_FN_AFE_TXOUT, AFE_TXOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_AFE_SCLK, AFE_SCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_AFE_RLYCNT, AFE_RLYCNT_MARK),
+	PINMUX_GPIO(GPIO_FN_AFE_HC1, AFE_HC1_MARK),
+
+	/* IIC */
+	PINMUX_GPIO(GPIO_FN_IIC_SCL, IIC_SCL_MARK),
+	PINMUX_GPIO(GPIO_FN_IIC_SDA, IIC_SDA_MARK),
+
+	/* DAC */
+	PINMUX_GPIO(GPIO_FN_DA1, DA1_MARK),
+	PINMUX_GPIO(GPIO_FN_DA0, DA0_MARK),
+
+	/* ADC */
+	PINMUX_GPIO(GPIO_FN_AN3, AN3_MARK),
+	PINMUX_GPIO(GPIO_FN_AN2, AN2_MARK),
+	PINMUX_GPIO(GPIO_FN_AN1, AN1_MARK),
+	PINMUX_GPIO(GPIO_FN_AN0, AN0_MARK),
+	PINMUX_GPIO(GPIO_FN_ADTRG, ADTRG_MARK),
+
+	/* USB */
+	PINMUX_GPIO(GPIO_FN_USB1D_RCV, USB1D_RCV_MARK),
+	PINMUX_GPIO(GPIO_FN_USB1D_TXSE0, USB1D_TXSE0_MARK),
+	PINMUX_GPIO(GPIO_FN_USB1D_TXDPLS, USB1D_TXDPLS_MARK),
+	PINMUX_GPIO(GPIO_FN_USB1D_DMNS, USB1D_DMNS_MARK),
+	PINMUX_GPIO(GPIO_FN_USB1D_DPLS, USB1D_DPLS_MARK),
+	PINMUX_GPIO(GPIO_FN_USB1D_SPEED, USB1D_SPEED_MARK),
+	PINMUX_GPIO(GPIO_FN_USB1D_TXENL, USB1D_TXENL_MARK),
+
+	PINMUX_GPIO(GPIO_FN_USB2_PWR_EN, USB2_PWR_EN_MARK),
+	PINMUX_GPIO(GPIO_FN_USB1_PWR_EN_USBF_UPLUP,
+		    USB1_PWR_EN_USBF_UPLUP_MARK),
+	PINMUX_GPIO(GPIO_FN_USB1D_SUSPEND, USB1D_SUSPEND_MARK),
+
+	/* INTC */
+	PINMUX_GPIO(GPIO_FN_IRQ5, IRQ5_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ4, IRQ4_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ3_IRL3, IRQ3_IRL3_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ2_IRL2, IRQ2_IRL2_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ1_IRL1, IRQ1_IRL1_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ0_IRL0, IRQ0_IRL0_MARK),
+
+	/* PCC */
+	PINMUX_GPIO(GPIO_FN_PCC_REG, PCC_REG_MARK),
+	PINMUX_GPIO(GPIO_FN_PCC_DRV, PCC_DRV_MARK),
+	PINMUX_GPIO(GPIO_FN_PCC_BVD2, PCC_BVD2_MARK),
+	PINMUX_GPIO(GPIO_FN_PCC_BVD1, PCC_BVD1_MARK),
+	PINMUX_GPIO(GPIO_FN_PCC_CD2, PCC_CD2_MARK),
+	PINMUX_GPIO(GPIO_FN_PCC_CD1, PCC_CD1_MARK),
+	PINMUX_GPIO(GPIO_FN_PCC_RESET, PCC_RESET_MARK),
+	PINMUX_GPIO(GPIO_FN_PCC_RDY, PCC_RDY_MARK),
+	PINMUX_GPIO(GPIO_FN_PCC_VS2, PCC_VS2_MARK),
+	PINMUX_GPIO(GPIO_FN_PCC_VS1, PCC_VS1_MARK),
+
+	/* HUDI */
+	PINMUX_GPIO(GPIO_FN_AUDATA3, AUDATA3_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA2, AUDATA2_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA1, AUDATA1_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA0, AUDATA0_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDCK, AUDCK_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDSYNC, AUDSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_ASEBRKAK, ASEBRKAK_MARK),
+	PINMUX_GPIO(GPIO_FN_TRST, TRST_MARK),
+	PINMUX_GPIO(GPIO_FN_TMS, TMS_MARK),
+	PINMUX_GPIO(GPIO_FN_TDO, TDO_MARK),
+	PINMUX_GPIO(GPIO_FN_TDI, TDI_MARK),
+	PINMUX_GPIO(GPIO_FN_TCK, TCK_MARK),
+
+	/* DMAC */
+	PINMUX_GPIO(GPIO_FN_DACK1, DACK1_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ1, DREQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK0, DACK0_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_TEND1, TEND1_MARK),
+	PINMUX_GPIO(GPIO_FN_TEND0, TEND0_MARK),
+
+	/* SIOF0 */
+	PINMUX_GPIO(GPIO_FN_SIOF0_SYNC, SIOF0_SYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF0_MCLK, SIOF0_MCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF0_TXD, SIOF0_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF0_RXD, SIOF0_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF0_SCK, SIOF0_SCK_MARK),
+
+	/* SIOF1 */
+	PINMUX_GPIO(GPIO_FN_SIOF1_SYNC, SIOF1_SYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF1_MCLK, SIOF1_MCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF1_TXD, SIOF1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF1_RXD, SIOF1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF1_SCK, SIOF1_SCK_MARK),
+
+	/* SCIF0 */
+	PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RTS, SCIF0_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_CTS, SCIF0_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK),
+
+	/* SCIF1 */
+	PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_RTS, SCIF1_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_CTS, SCIF1_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_SCK, SCIF1_SCK_MARK),
+
+	/* TPU */
+	PINMUX_GPIO(GPIO_FN_TPU_TO1, TPU_TO1_MARK),
+	PINMUX_GPIO(GPIO_FN_TPU_TO0, TPU_TO0_MARK),
+	PINMUX_GPIO(GPIO_FN_TPU_TI3B, TPU_TI3B_MARK),
+	PINMUX_GPIO(GPIO_FN_TPU_TI3A, TPU_TI3A_MARK),
+	PINMUX_GPIO(GPIO_FN_TPU_TI2B, TPU_TI2B_MARK),
+	PINMUX_GPIO(GPIO_FN_TPU_TI2A, TPU_TI2A_MARK),
+	PINMUX_GPIO(GPIO_FN_TPU_TO3, TPU_TO3_MARK),
+	PINMUX_GPIO(GPIO_FN_TPU_TO2, TPU_TO2_MARK),
+
+	/* SIM */
+	PINMUX_GPIO(GPIO_FN_SIM_D, SIM_D_MARK),
+	PINMUX_GPIO(GPIO_FN_SIM_CLK, SIM_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIM_RST, SIM_RST_MARK),
+
+	/* MMC */
+	PINMUX_GPIO(GPIO_FN_MMC_DAT, MMC_DAT_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_CMD, MMC_CMD_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_CLK, MMC_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_VDDON, MMC_VDDON_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_ODMOD, MMC_ODMOD_MARK),
+
+	/* SYSC */
+	PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK),
+	PINMUX_GPIO(GPIO_FN_STATUS1, STATUS1_MARK),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2) {
+		PTA7_FN, PTA7_OUT, PTA7_IN_PU, PTA7_IN,
+		PTA6_FN, PTA6_OUT, PTA6_IN_PU, PTA6_IN,
+		PTA5_FN, PTA5_OUT, PTA5_IN_PU, PTA5_IN,
+		PTA4_FN, PTA4_OUT, PTA4_IN_PU, PTA4_IN,
+		PTA3_FN, PTA3_OUT, PTA3_IN_PU, PTA3_IN,
+		PTA2_FN, PTA2_OUT, PTA2_IN_PU, PTA2_IN,
+		PTA1_FN, PTA1_OUT, PTA1_IN_PU, PTA1_IN,
+		PTA0_FN, PTA0_OUT, PTA0_IN_PU, PTA0_IN }
+	},
+	{ PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2) {
+		PTB7_FN, PTB7_OUT, PTB7_IN_PU, PTB7_IN,
+		PTB6_FN, PTB6_OUT, PTB6_IN_PU, PTB6_IN,
+		PTB5_FN, PTB5_OUT, PTB5_IN_PU, PTB5_IN,
+		PTB4_FN, PTB4_OUT, PTB4_IN_PU, PTB4_IN,
+		PTB3_FN, PTB3_OUT, PTB3_IN_PU, PTB3_IN,
+		PTB2_FN, PTB2_OUT, PTB2_IN_PU, PTB2_IN,
+		PTB1_FN, PTB1_OUT, PTB1_IN_PU, PTB1_IN,
+		PTB0_FN, PTB0_OUT, PTB0_IN_PU, PTB0_IN }
+	},
+	{ PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2) {
+		PTC7_FN, PTC7_OUT, PTC7_IN_PU, PTC7_IN,
+		PTC6_FN, PTC6_OUT, PTC6_IN_PU, PTC6_IN,
+		PTC5_FN, PTC5_OUT, PTC5_IN_PU, PTC5_IN,
+		PTC4_FN, PTC4_OUT, PTC4_IN_PU, PTC4_IN,
+		PTC3_FN, PTC3_OUT, PTC3_IN_PU, PTC3_IN,
+		PTC2_FN, PTC2_OUT, PTC2_IN_PU, PTC2_IN,
+		PTC1_FN, PTC1_OUT, PTC1_IN_PU, PTC1_IN,
+		PTC0_FN, PTC0_OUT, PTC0_IN_PU, PTC0_IN }
+	},
+	{ PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2) {
+		PTD7_FN, PTD7_OUT, PTD7_IN_PU, PTD7_IN,
+		PTD6_FN, PTD6_OUT, PTD6_IN_PU, PTD6_IN,
+		PTD5_FN, PTD5_OUT, PTD5_IN_PU, PTD5_IN,
+		PTD4_FN, PTD4_OUT, PTD4_IN_PU, PTD4_IN,
+		PTD3_FN, PTD3_OUT, PTD3_IN_PU, PTD3_IN,
+		PTD2_FN, PTD2_OUT, PTD2_IN_PU, PTD2_IN,
+		PTD1_FN, PTD1_OUT, PTD1_IN_PU, PTD1_IN,
+		PTD0_FN, PTD0_OUT, PTD0_IN_PU, PTD0_IN }
+	},
+	{ PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2) {
+		0, 0, 0, 0,
+		PTE6_FN, 0, 0, PTE6_IN,
+		PTE5_FN, 0, 0, PTE5_IN,
+		PTE4_FN, PTE4_OUT, PTE4_IN_PU, PTE4_IN,
+		PTE3_FN, PTE3_OUT, PTE3_IN_PU, PTE3_IN,
+		PTE2_FN, PTE2_OUT, PTE2_IN_PU, PTE2_IN,
+		PTE1_FN, PTE1_OUT, PTE1_IN_PU, PTE1_IN,
+		PTE0_FN, PTE0_OUT, PTE0_IN_PU, PTE0_IN }
+	},
+	{ PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2) {
+		0, 0, 0, 0,
+		PTF6_FN, 0, 0, PTF6_IN,
+		PTF5_FN, 0, 0, PTF5_IN,
+		PTF4_FN, 0, 0, PTF4_IN,
+		PTF3_FN, 0, 0, PTF3_IN,
+		PTF2_FN, 0, 0, PTF2_IN,
+		PTF1_FN, 0, 0, PTF1_IN,
+		PTF0_FN, 0, 0, PTF0_IN }
+	},
+	{ PINMUX_CFG_REG("PGCR", 0xa405010c, 16, 2) {
+		0, 0, 0, 0,
+		PTG6_FN, PTG6_OUT, PTG6_IN_PU, PTG6_IN,
+		PTG5_FN, PTG5_OUT, PTG5_IN_PU, PTG5_IN,
+		PTG4_FN, PTG4_OUT, PTG4_IN_PU, PTG4_IN,
+		PTG3_FN, PTG3_OUT, PTG3_IN_PU, PTG3_IN,
+		PTG2_FN, PTG2_OUT, PTG2_IN_PU, PTG2_IN,
+		PTG1_FN, PTG1_OUT, PTG1_IN_PU, PTG1_IN,
+		PTG0_FN, PTG0_OUT, PTG0_IN_PU, PTG0_IN }
+	},
+	{ PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2) {
+		0, 0, 0, 0,
+		PTH6_FN, PTH6_OUT, PTH6_IN_PU, PTH6_IN,
+		PTH5_FN, PTH5_OUT, PTH5_IN_PU, PTH5_IN,
+		PTH4_FN, PTH4_OUT, PTH4_IN_PU, PTH4_IN,
+		PTH3_FN, PTH3_OUT, PTH3_IN_PU, PTH3_IN,
+		PTH2_FN, PTH2_OUT, PTH2_IN_PU, PTH2_IN,
+		PTH1_FN, PTH1_OUT, PTH1_IN_PU, PTH1_IN,
+		PTH0_FN, PTH0_OUT, PTH0_IN_PU, PTH0_IN }
+	},
+	{ PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2) {
+		0, 0, 0, 0,
+		PTJ6_FN, PTJ6_OUT, PTJ6_IN_PU, PTJ6_IN,
+		PTJ5_FN, PTJ5_OUT, PTJ5_IN_PU, PTJ5_IN,
+		PTJ4_FN, PTJ4_OUT, PTJ4_IN_PU, PTJ4_IN,
+		PTJ3_FN, PTJ3_OUT, PTJ3_IN_PU, PTJ3_IN,
+		PTJ2_FN, PTJ2_OUT, PTJ2_IN_PU, PTJ2_IN,
+		PTJ1_FN, PTJ1_OUT, PTJ1_IN_PU, PTJ1_IN,
+		PTJ0_FN, PTJ0_OUT, PTJ0_IN_PU, PTJ0_IN }
+	},
+	{ PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTK3_FN, PTK3_OUT, PTK3_IN_PU, PTK3_IN,
+		PTK2_FN, PTK2_OUT, PTK2_IN_PU, PTK2_IN,
+		PTK1_FN, PTK1_OUT, PTK1_IN_PU, PTK1_IN,
+		PTK0_FN, PTK0_OUT, PTK0_IN_PU, PTK0_IN }
+	},
+	{ PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2) {
+		PTL7_FN, PTL7_OUT, PTL7_IN_PU, PTL7_IN,
+		PTL6_FN, PTL6_OUT, PTL6_IN_PU, PTL6_IN,
+		PTL5_FN, PTL5_OUT, PTL5_IN_PU, PTL5_IN,
+		PTL4_FN, PTL4_OUT, PTL4_IN_PU, PTL4_IN,
+		PTL3_FN, PTL3_OUT, PTL3_IN_PU, PTL3_IN,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2) {
+		PTM7_FN, PTM7_OUT, PTM7_IN_PU, PTM7_IN,
+		PTM6_FN, PTM6_OUT, PTM6_IN_PU, PTM6_IN,
+		PTM5_FN, PTM5_OUT, PTM5_IN_PU, PTM5_IN,
+		PTM4_FN, PTM4_OUT, PTM4_IN_PU, PTM4_IN,
+		PTM3_FN, PTM3_OUT, PTM3_IN_PU, PTM3_IN,
+		PTM2_FN, PTM2_OUT, PTM2_IN_PU, PTM2_IN,
+		PTM1_FN, PTM1_OUT, PTM1_IN_PU, PTM1_IN,
+		PTM0_FN, PTM0_OUT, PTM0_IN_PU, PTM0_IN }
+	},
+	{ PINMUX_CFG_REG("PPCR", 0xa4050118, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTP4_FN, PTP4_OUT, PTP4_IN_PU, PTP4_IN,
+		PTP3_FN, PTP3_OUT, PTP3_IN_PU, PTP3_IN,
+		PTP2_FN, PTP2_OUT, PTP2_IN_PU, PTP2_IN,
+		PTP1_FN, PTP1_OUT, PTP1_IN_PU, PTP1_IN,
+		PTP0_FN, PTP0_OUT, PTP0_IN_PU, PTP0_IN }
+	},
+	{ PINMUX_CFG_REG("PRCR", 0xa405011a, 16, 2) {
+		PTR7_FN, PTR7_OUT, PTR7_IN_PU, PTR7_IN,
+		PTR6_FN, PTR6_OUT, PTR6_IN_PU, PTR6_IN,
+		PTR5_FN, PTR5_OUT, PTR5_IN_PU, PTR5_IN,
+		PTR4_FN, PTR4_OUT, PTR4_IN_PU, PTR4_IN,
+		PTR3_FN, PTR3_OUT, PTR3_IN_PU, PTR3_IN,
+		PTR2_FN, PTR2_OUT, PTR2_IN_PU, PTR2_IN,
+		PTR1_FN, PTR1_OUT, PTR1_IN_PU, PTR1_IN,
+		PTR0_FN, PTR0_OUT, PTR0_IN_PU, PTR0_IN }
+	},
+	{ PINMUX_CFG_REG("PSCR", 0xa405011c, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTS4_FN, PTS4_OUT, PTS4_IN_PU, PTS4_IN,
+		PTS3_FN, PTS3_OUT, PTS3_IN_PU, PTS3_IN,
+		PTS2_FN, PTS2_OUT, PTS2_IN_PU, PTS2_IN,
+		PTS1_FN, PTS1_OUT, PTS1_IN_PU, PTS1_IN,
+		PTS0_FN, PTS0_OUT, PTS0_IN_PU, PTS0_IN }
+	},
+	{ PINMUX_CFG_REG("PTCR", 0xa405011e, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTT4_FN, PTT4_OUT, PTT4_IN_PU, PTT4_IN,
+		PTT3_FN, PTT3_OUT, PTT3_IN_PU, PTT3_IN,
+		PTT2_FN, PTT2_OUT, PTT2_IN_PU, PTT2_IN,
+		PTT1_FN, PTT1_OUT, PTT1_IN_PU, PTT1_IN,
+		PTT0_FN, PTT0_OUT, PTT0_IN_PU, PTT0_IN }
+	},
+	{ PINMUX_CFG_REG("PUCR", 0xa4050120, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTU4_FN, PTU4_OUT, PTU4_IN_PU, PTU4_IN,
+		PTU3_FN, PTU3_OUT, PTU3_IN_PU, PTU3_IN,
+		PTU2_FN, PTU2_OUT, PTU2_IN_PU, PTU2_IN,
+		PTU1_FN, PTU1_OUT, PTU1_IN_PU, PTU1_IN,
+		PTU0_FN, PTU0_OUT, PTU0_IN_PU, PTU0_IN }
+	},
+	{ PINMUX_CFG_REG("PVCR", 0xa4050122, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTV4_FN, PTV4_OUT, PTV4_IN_PU, PTV4_IN,
+		PTV3_FN, PTV3_OUT, PTV3_IN_PU, PTV3_IN,
+		PTV2_FN, PTV2_OUT, PTV2_IN_PU, PTV2_IN,
+		PTV1_FN, PTV1_OUT, PTV1_IN_PU, PTV1_IN,
+		PTV0_FN, PTV0_OUT, PTV0_IN_PU, PTV0_IN }
+	},
+	{}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PADR", 0xa4050140, 8) {
+		PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+		PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA }
+	},
+	{ PINMUX_DATA_REG("PBDR", 0xa4050142, 8) {
+		PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+		PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA }
+	},
+	{ PINMUX_DATA_REG("PCDR", 0xa4050144, 8) {
+		PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+		PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA }
+	},
+	{ PINMUX_DATA_REG("PDDR", 0xa4050126, 8) {
+		PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+		PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA }
+	},
+	{ PINMUX_DATA_REG("PEDR", 0xa4050148, 8) {
+		0, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+		PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA }
+	},
+	{ PINMUX_DATA_REG("PFDR", 0xa405014a, 8) {
+		0, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+		PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA }
+	},
+	{ PINMUX_DATA_REG("PGDR", 0xa405014c, 8) {
+		0, PTG6_DATA, PTG5_DATA, PTG4_DATA,
+		PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA }
+	},
+	{ PINMUX_DATA_REG("PHDR", 0xa405014e, 8) {
+		0, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+		PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA }
+	},
+	{ PINMUX_DATA_REG("PJDR", 0xa4050150, 8) {
+		0, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
+		PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PKDR", 0xa4050152, 8) {
+		0, 0, 0, 0,
+		PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA }
+	},
+	{ PINMUX_DATA_REG("PLDR", 0xa4050154, 8) {
+		PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+		PTL3_DATA, 0, 0, 0 }
+	},
+	{ PINMUX_DATA_REG("PMDR", 0xa4050156, 8) {
+		PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+		PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA }
+	},
+	{ PINMUX_DATA_REG("PPDR", 0xa4050158, 8) {
+		0, 0, 0, PTP4_DATA,
+		PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA }
+	},
+	{ PINMUX_DATA_REG("PRDR", 0xa405015a, 8) {
+		PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+		PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA }
+	},
+	{ PINMUX_DATA_REG("PSDR", 0xa405015c, 8) {
+		0, 0, 0, PTS4_DATA,
+		PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA }
+	},
+	{ PINMUX_DATA_REG("PTDR", 0xa405015e, 8) {
+		0, 0, 0, PTT4_DATA,
+		PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PUDR", 0xa4050160, 8) {
+		0, 0, 0, PTU4_DATA,
+		PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA }
+	},
+	{ PINMUX_DATA_REG("PVDR", 0xa4050162, 8) {
+		0, 0, 0, PTV4_DATA,
+		PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7720_pinmux_info = {
+	.name = "sh7720_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PTA7,
+	.last_gpio = GPIO_FN_STATUS1,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return register_pinmux(&sh7720_pinmux_info);
+}
+
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 2d452f6..2780917 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -36,7 +36,7 @@ extern unsigned long int float32_add(unsigned long int a, unsigned long int b);
 extern unsigned long long float64_sub(unsigned long long a,
 				      unsigned long long b);
 extern unsigned long int float32_sub(unsigned long int a, unsigned long int b);
-
+extern unsigned long int float64_to_float32(unsigned long long a);
 static unsigned int fpu_exception_flags;
 
 /*
@@ -417,6 +417,29 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 
 		regs->pc = nextpc;
 		return 1;
+	} else if ((finsn & 0xf0bd) == 0xf0bd) {
+		/* fcnvds - double to single precision convert */
+		struct task_struct *tsk = current;
+		int m;
+		unsigned int hx;
+
+		m = (finsn >> 9) & 0x7;
+		hx = tsk->thread.fpu.hard.fp_regs[m];
+
+		if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR)
+			&& ((hx & 0x7fffffff) < 0x00100000)) {
+			/* subnormal double to float conversion */
+			long long llx;
+
+			llx = ((long long)tsk->thread.fpu.hard.fp_regs[m] << 32)
+			    | tsk->thread.fpu.hard.fp_regs[m + 1];
+
+			tsk->thread.fpu.hard.fpul = float64_to_float32(llx);
+		} else
+			return 0;
+
+		regs->pc = nextpc;
+		return 1;
 	}
 
 	return 0;
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 254c5c5..d9bdc93 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/io.h>
 
 enum {
 	UNUSED = 0,
@@ -178,10 +179,14 @@ static int __init sh7760_devices_setup(void)
 }
 __initcall(sh7760_devices_setup);
 
+#define INTC_ICR	0xffd00000UL
+#define INTC_ICR_IRLM	(1 << 7)
+
 void __init plat_irq_setup_pins(int mode)
 {
 	switch (mode) {
 	case IRQ_MODE_IRQ:
+		ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
 		register_intc_controller(&intc_desc_irq);
 		break;
 	default:
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
index 828cb57..2b747f3 100644
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ b/arch/sh/kernel/cpu/sh4/softfloat.c
@@ -85,6 +85,7 @@ float64 float64_div(float64 a, float64 b);
 float32 float32_div(float32 a, float32 b);
 float32 float32_mul(float32 a, float32 b);
 float64 float64_mul(float64 a, float64 b);
+float32 float64_to_float32(float64 a);
 inline void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
 		   bits64 * z1Ptr);
 inline void sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
@@ -890,3 +891,31 @@ float64 float64_mul(float64 a, float64 b)
 	}
 	return roundAndPackFloat64(zSign, zExp, zSig0);
 }
+
+/*
+ * -------------------------------------------------------------------------------
+ *  Returns the result of converting the double-precision floating-point value
+ *  `a' to the single-precision floating-point format.  The conversion is
+ *  performed according to the IEC/IEEE Standard for Binary Floating-point
+ *  Arithmetic.
+ *  -------------------------------------------------------------------------------
+ *  */
+float32 float64_to_float32(float64 a)
+{
+    flag aSign;
+    int16 aExp;
+    bits64 aSig;
+    bits32 zSig;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+
+    shift64RightJamming( aSig, 22, &aSig );
+    zSig = aSig;
+    if ( aExp || zSig ) {
+        zSig |= 0x40000000;
+        aExp -= 0x381;
+    }
+    return roundAndPackFloat32(aSign, aExp, zSig);
+}
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 9381ad8..8e344ec 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -27,5 +27,11 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 
+# Pinmux setup
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7722)	:= pinmux-sh7722.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7723)	:= pinmux-sh7723.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
+
 obj-y			+= $(clock-y)
 obj-$(CONFIG_SMP)	+= $(smp-y)
+obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
index 45889d4..3177d0d 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
@@ -18,7 +18,6 @@
 
 static int bfc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
 static int p0fc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
-static int p1fc_divisors[] = { 1, 1, 1, 16, 1, 1, 1, 1 };
 static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 };
 
 static void master_clk_init(struct clk *clk)
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
new file mode 100644
index 0000000..cb9d07b
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
@@ -0,0 +1,1783 @@
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7722.h>
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+	PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
+	PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+	PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
+	PTC7_DATA, PTC5_DATA, PTC4_DATA, PTC3_DATA, PTC2_DATA, PTC0_DATA,
+	PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+	PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
+	PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA, PTE1_DATA, PTE0_DATA,
+	PTF6_DATA, PTF5_DATA, PTF4_DATA,
+	PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
+	PTG4_DATA, PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
+	PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+	PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
+	PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, PTJ1_DATA, PTJ0_DATA,
+	PTK6_DATA, PTK5_DATA, PTK4_DATA,
+	PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
+	PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+	PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
+	PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+	PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
+	PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+	PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
+	PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+	PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
+	PTR4_DATA, PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
+	PTS4_DATA, PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
+	PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
+	PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
+	PTV4_DATA, PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
+	PTW6_DATA, PTW5_DATA, PTW4_DATA,
+	PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
+	PTX6_DATA, PTX5_DATA, PTX4_DATA,
+	PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
+	PTY6_DATA, PTY5_DATA, PTY4_DATA,
+	PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
+	PTZ5_DATA, PTZ4_DATA, PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
+	PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
+	PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
+	PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
+	PTC7_IN, PTC5_IN, PTC4_IN, PTC3_IN, PTC2_IN, PTC0_IN,
+	PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN, PTD3_IN, PTD2_IN, PTD1_IN,
+	PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN, PTE1_IN, PTE0_IN,
+	PTF6_IN, PTF5_IN, PTF4_IN, PTF3_IN, PTF2_IN, PTF1_IN,
+	PTH6_IN, PTH5_IN, PTH1_IN, PTH0_IN,
+	PTJ1_IN, PTJ0_IN,
+	PTK6_IN, PTK5_IN, PTK4_IN, PTK3_IN, PTK2_IN, PTK0_IN,
+	PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
+	PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
+	PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
+	PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
+	PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
+	PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
+	PTQ5_IN, PTQ4_IN, PTQ3_IN, PTQ2_IN, PTQ0_IN,
+	PTR2_IN,
+	PTS4_IN, PTS2_IN, PTS1_IN,
+	PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN,
+	PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
+	PTV4_IN, PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
+	PTW6_IN, PTW4_IN, PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
+	PTX6_IN, PTX5_IN, PTX4_IN, PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
+	PTY5_IN, PTY4_IN, PTY3_IN, PTY2_IN, PTY0_IN,
+	PTZ5_IN, PTZ4_IN, PTZ3_IN, PTZ2_IN, PTZ1_IN,
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PTA7_IN_PD, PTA6_IN_PD, PTA5_IN_PD, PTA4_IN_PD,
+	PTA3_IN_PD, PTA2_IN_PD, PTA1_IN_PD, PTA0_IN_PD,
+	PTE7_IN_PD, PTE6_IN_PD, PTE5_IN_PD, PTE4_IN_PD,	PTE1_IN_PD, PTE0_IN_PD,
+	PTF6_IN_PD, PTF5_IN_PD, PTF4_IN_PD, PTF3_IN_PD, PTF2_IN_PD, PTF1_IN_PD,
+	PTH6_IN_PD, PTH5_IN_PD, PTH1_IN_PD, PTH0_IN_PD,
+	PTK6_IN_PD, PTK5_IN_PD, PTK4_IN_PD, PTK3_IN_PD, PTK2_IN_PD, PTK0_IN_PD,
+	PTL7_IN_PD, PTL6_IN_PD, PTL5_IN_PD, PTL4_IN_PD,
+	PTL3_IN_PD, PTL2_IN_PD, PTL1_IN_PD, PTL0_IN_PD,
+	PTM7_IN_PD, PTM6_IN_PD, PTM5_IN_PD, PTM4_IN_PD,
+	PTM3_IN_PD, PTM2_IN_PD, PTM1_IN_PD, PTM0_IN_PD,
+	PTQ5_IN_PD, PTQ4_IN_PD, PTQ3_IN_PD, PTQ2_IN_PD,
+	PTS4_IN_PD, PTS2_IN_PD, PTS1_IN_PD,
+	PTT4_IN_PD, PTT3_IN_PD, PTT2_IN_PD, PTT1_IN_PD,
+	PTU4_IN_PD, PTU3_IN_PD, PTU2_IN_PD, PTU1_IN_PD, PTU0_IN_PD,
+	PTV4_IN_PD, PTV3_IN_PD, PTV2_IN_PD, PTV1_IN_PD, PTV0_IN_PD,
+	PTW6_IN_PD, PTW4_IN_PD,	PTW3_IN_PD, PTW2_IN_PD, PTW1_IN_PD, PTW0_IN_PD,
+	PTX6_IN_PD, PTX5_IN_PD, PTX4_IN_PD,
+	PTX3_IN_PD, PTX2_IN_PD, PTX1_IN_PD, PTX0_IN_PD,
+	PINMUX_INPUT_PULLDOWN_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PTC7_IN_PU, PTC5_IN_PU,
+	PTD7_IN_PU, PTD6_IN_PU, PTD5_IN_PU, PTD4_IN_PU,
+	PTD3_IN_PU, PTD2_IN_PU, PTD1_IN_PU,
+	PTJ1_IN_PU, PTJ0_IN_PU,
+	PTQ0_IN_PU,
+	PTR2_IN_PU,
+	PTX6_IN_PU,
+	PTY5_IN_PU, PTY4_IN_PU, PTY3_IN_PU, PTY2_IN_PU, PTY0_IN_PU,
+	PTZ5_IN_PU, PTZ4_IN_PU, PTZ3_IN_PU, PTZ2_IN_PU, PTZ1_IN_PU,
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PTA7_OUT, PTA5_OUT,
+	PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
+	PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
+	PTC4_OUT, PTC3_OUT, PTC2_OUT, PTC0_OUT,
+	PTD6_OUT, PTD5_OUT, PTD4_OUT,
+	PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
+	PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT, PTE1_OUT, PTE0_OUT,
+	PTF6_OUT, PTF5_OUT, PTF4_OUT, PTF3_OUT, PTF2_OUT, PTF0_OUT,
+	PTG4_OUT, PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
+	PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
+	PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
+	PTJ7_OUT, PTJ6_OUT, PTJ5_OUT, PTJ1_OUT, PTJ0_OUT,
+	PTK6_OUT, PTK5_OUT, PTK4_OUT, PTK3_OUT, PTK1_OUT, PTK0_OUT,
+	PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
+	PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
+	PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
+	PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
+	PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
+	PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,	PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
+	PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
+	PTR4_OUT, PTR3_OUT, PTR1_OUT, PTR0_OUT,
+	PTS3_OUT, PTS2_OUT, PTS0_OUT,
+	PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT0_OUT,
+	PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU0_OUT,
+	PTV4_OUT, PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
+	PTW5_OUT, PTW4_OUT, PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
+	PTX6_OUT, PTX5_OUT, PTX4_OUT, PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
+	PTY5_OUT, PTY4_OUT, PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
+	PINMUX_OUTPUT_END,
+
+	PINMUX_MARK_BEGIN,
+	SCIF0_TXD_MARK, SCIF0_RXD_MARK,
+	SCIF0_RTS_MARK, SCIF0_CTS_MARK, SCIF0_SCK_MARK,
+	SCIF1_TXD_MARK, SCIF1_RXD_MARK,
+	SCIF1_RTS_MARK, SCIF1_CTS_MARK, SCIF1_SCK_MARK,
+	SCIF2_TXD_MARK, SCIF2_RXD_MARK,
+	SCIF2_RTS_MARK, SCIF2_CTS_MARK, SCIF2_SCK_MARK,
+	SIOTXD_MARK, SIORXD_MARK,
+	SIOD_MARK, SIOSTRB0_MARK, SIOSTRB1_MARK,
+	SIOSCK_MARK, SIOMCK_MARK,
+	VIO_D15_MARK, VIO_D14_MARK, VIO_D13_MARK, VIO_D12_MARK,
+	VIO_D11_MARK, VIO_D10_MARK, VIO_D9_MARK, VIO_D8_MARK,
+	VIO_D7_MARK, VIO_D6_MARK, VIO_D5_MARK, VIO_D4_MARK,
+	VIO_D3_MARK, VIO_D2_MARK, VIO_D1_MARK, VIO_D0_MARK,
+	VIO_CLK_MARK, VIO_VD_MARK, VIO_HD_MARK, VIO_FLD_MARK,
+	VIO_CKO_MARK, VIO_STEX_MARK, VIO_STEM_MARK, VIO_VD2_MARK,
+	VIO_HD2_MARK, VIO_CLK2_MARK,
+	LCDD23_MARK, LCDD22_MARK, LCDD21_MARK, LCDD20_MARK,
+	LCDD19_MARK, LCDD18_MARK, LCDD17_MARK, LCDD16_MARK,
+	LCDD15_MARK, LCDD14_MARK, LCDD13_MARK, LCDD12_MARK,
+	LCDD11_MARK, LCDD10_MARK, LCDD9_MARK, LCDD8_MARK,
+	LCDD7_MARK, LCDD6_MARK, LCDD5_MARK, LCDD4_MARK,
+	LCDD3_MARK, LCDD2_MARK, LCDD1_MARK, LCDD0_MARK,
+	LCDLCLK_MARK, LCDDON_MARK, LCDVCPWC_MARK, LCDVEPWC_MARK,
+	LCDVSYN_MARK, LCDDCK_MARK, LCDHSYN_MARK, LCDDISP_MARK,
+	LCDRS_MARK, LCDCS_MARK, LCDWR_MARK, LCDRD_MARK,
+	LCDDON2_MARK, LCDVCPWC2_MARK, LCDVEPWC2_MARK, LCDVSYN2_MARK,
+	LCDCS2_MARK,
+	IOIS16_MARK, A25_MARK, A24_MARK, A23_MARK, A22_MARK,
+	BS_MARK, CS6B_CE1B_MARK, WAIT_MARK, CS6A_CE2B_MARK,
+	HPD63_MARK, HPD62_MARK, HPD61_MARK, HPD60_MARK,
+	HPD59_MARK, HPD58_MARK, HPD57_MARK, HPD56_MARK,
+	HPD55_MARK, HPD54_MARK, HPD53_MARK, HPD52_MARK,
+	HPD51_MARK, HPD50_MARK, HPD49_MARK, HPD48_MARK,
+	HPDQM7_MARK, HPDQM6_MARK, HPDQM5_MARK, HPDQM4_MARK,
+	IRQ0_MARK, IRQ1_MARK, IRQ2_MARK, IRQ3_MARK,
+	IRQ4_MARK, IRQ5_MARK, IRQ6_MARK, IRQ7_MARK,
+	SDHICD_MARK, SDHIWP_MARK, SDHID3_MARK, SDHID2_MARK,
+	SDHID1_MARK, SDHID0_MARK, SDHICMD_MARK, SDHICLK_MARK,
+	SIUAOLR_MARK, SIUAOBT_MARK, SIUAISLD_MARK, SIUAILR_MARK,
+	SIUAIBT_MARK, SIUAOSLD_MARK, SIUMCKA_MARK, SIUFCKA_MARK,
+	SIUBOLR_MARK, SIUBOBT_MARK, SIUBISLD_MARK, SIUBILR_MARK,
+	SIUBIBT_MARK, SIUBOSLD_MARK, SIUMCKB_MARK, SIUFCKB_MARK,
+	AUDSYNC_MARK, AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK,	AUDATA0_MARK,
+	DACK_MARK, DREQ0_MARK,
+	DV_CLKI_MARK, DV_CLK_MARK, DV_HSYNC_MARK, DV_VSYNC_MARK,
+	DV_D15_MARK, DV_D14_MARK, DV_D13_MARK, DV_D12_MARK,
+	DV_D11_MARK, DV_D10_MARK, DV_D9_MARK, DV_D8_MARK,
+	DV_D7_MARK, DV_D6_MARK, DV_D5_MARK, DV_D4_MARK,
+	DV_D3_MARK, DV_D2_MARK, DV_D1_MARK, DV_D0_MARK,
+	STATUS0_MARK, PDSTATUS_MARK,
+	SIOF0_MCK_MARK, SIOF0_SCK_MARK,
+	SIOF0_SYNC_MARK, SIOF0_SS1_MARK, SIOF0_SS2_MARK,
+	SIOF0_TXD_MARK,	SIOF0_RXD_MARK,
+	SIOF1_MCK_MARK, SIOF1_SCK_MARK,
+	SIOF1_SYNC_MARK, SIOF1_SS1_MARK, SIOF1_SS2_MARK,
+	SIOF1_TXD_MARK, SIOF1_RXD_MARK,
+	SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
+	TS_SDAT_MARK, TS_SCK_MARK, TS_SDEN_MARK, TS_SPSYNC_MARK,
+	IRDA_IN_MARK, IRDA_OUT_MARK,
+	TPUTO_MARK,
+	FCE_MARK, NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
+	NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK, FCDE_MARK,
+	FOE_MARK, FSC_MARK, FWE_MARK, FRB_MARK,
+	KEYIN0_MARK, KEYIN1_MARK, KEYIN2_MARK, KEYIN3_MARK, KEYIN4_MARK,
+	KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK,
+	KEYOUT4_IN6_MARK, KEYOUT5_IN5_MARK,
+	PINMUX_MARK_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	VIO_D7_SCIF1_SCK, VIO_D6_SCIF1_RXD, VIO_D5_SCIF1_TXD, VIO_D4,
+	VIO_D3, VIO_D2, VIO_D1, VIO_D0_LCDLCLK,
+	HPD55, HPD54, HPD53, HPD52, HPD51, HPD50, HPD49, HPD48,
+	IOIS16, HPDQM7, HPDQM6, HPDQM5, HPDQM4,
+	SDHICD, SDHIWP, SDHID3, IRQ2_SDHID2, SDHID1, SDHID0, SDHICMD, SDHICLK,
+	A25, A24, A23, A22, IRQ5, IRQ4_BS,
+	PTF6, SIOSCK_SIUBOBT, SIOSTRB1_SIUBOLR,
+	SIOSTRB0_SIUBIBT, SIOD_SIUBILR, SIORXD_SIUBISLD, SIOTXD_SIUBOSLD,
+	AUDSYNC, AUDATA3, AUDATA2, AUDATA1, AUDATA0,
+	LCDVCPWC_LCDVCPWC2, LCDVSYN2_DACK, LCDVSYN, LCDDISP_LCDRS,
+	LCDHSYN_LCDCS, LCDDON_LCDDON2, LCDD17_DV_HSYNC, LCDD16_DV_VSYNC,
+	STATUS0, PDSTATUS, IRQ1, IRQ0,
+	SIUAILR_SIOF1_SS2, SIUAIBT_SIOF1_SS1, SIUAOLR_SIOF1_SYNC,
+	SIUAOBT_SIOF1_SCK, SIUAISLD_SIOF1_RXD, SIUAOSLD_SIOF1_TXD, PTK0,
+	LCDD15_DV_D15, LCDD14_DV_D14, LCDD13_DV_D13, LCDD12_DV_D12,
+	LCDD11_DV_D11, LCDD10_DV_D10, LCDD9_DV_D9, LCDD8_DV_D8,
+	LCDD7_DV_D7, LCDD6_DV_D6, LCDD5_DV_D5, LCDD4_DV_D4,
+	LCDD3_DV_D3, LCDD2_DV_D2, LCDD1_DV_D1, LCDD0_DV_D0,
+	HPD63, HPD62, HPD61, HPD60, HPD59, HPD58, HPD57, HPD56,
+	SIOF0_SS2_SIM_RST, SIOF0_SS1_TS_SPSYNC, SIOF0_SYNC_TS_SDEN,
+	SIOF0_SCK_TS_SCK, PTQ2, PTQ1, PTQ0,
+	LCDRD, CS6B_CE1B_LCDCS2, WAIT, LCDDCK_LCDWR, LCDVEPWC_LCDVEPWC2,
+	SCIF0_CTS_SIUAISPD, SCIF0_RTS_SIUAOSPD,
+	SCIF0_SCK_TPUTO, SCIF0_RXD, SCIF0_TXD,
+	FOE_VIO_VD2, FWE, FSC, DREQ0, FCDE,
+	NAF2_VIO_D10, NAF1_VIO_D9, NAF0_VIO_D8,
+	FRB_VIO_CLK2, FCE_VIO_HD2,
+	NAF7_VIO_D15, NAF6_VIO_D14, NAF5_VIO_D13, NAF4_VIO_D12, NAF3_VIO_D11,
+	VIO_FLD_SCIF2_CTS, VIO_CKO_SCIF2_RTS, VIO_STEX_SCIF2_SCK,
+	VIO_STEM_SCIF2_TXD, VIO_HD_SCIF2_RXD,
+	VIO_VD_SCIF1_CTS, VIO_CLK_SCIF1_RTS,
+	CS6A_CE2B, LCDD23, LCDD22, LCDD21, LCDD20,
+	LCDD19_DV_CLKI, LCDD18_DV_CLK,
+	KEYOUT5_IN5, KEYOUT4_IN6, KEYOUT3, KEYOUT2, KEYOUT1, KEYOUT0,
+	KEYIN4_IRQ7, KEYIN3, KEYIN2, KEYIN1, KEYIN0_IRQ6,
+
+	PSA15_KEYIN0, PSA15_IRQ6, PSA14_KEYIN4, PSA14_IRQ7,
+	PSA9_IRQ4, PSA9_BS, PSA4_IRQ2, PSA4_SDHID2,
+	PSB15_SIOTXD, PSB15_SIUBOSLD, PSB14_SIORXD, PSB14_SIUBISLD,
+	PSB13_SIOD, PSB13_SIUBILR, PSB12_SIOSTRB0, PSB12_SIUBIBT,
+	PSB11_SIOSTRB1, PSB11_SIUBOLR, PSB10_SIOSCK, PSB10_SIUBOBT,
+	PSB9_SIOMCK, PSB9_SIUMCKB, PSB8_SIOF0_MCK, PSB8_IRQ3,
+	PSB7_SIOF0_TXD, PSB7_IRDA_OUT, PSB6_SIOF0_RXD, PSB6_IRDA_IN,
+	PSB5_SIOF0_SCK, PSB5_TS_SCK, PSB4_SIOF0_SYNC, PSB4_TS_SDEN,
+	PSB3_SIOF0_SS1, PSB3_TS_SPSYNC, PSB2_SIOF0_SS2, PSB2_SIM_RST,
+	PSB1_SIUMCKA, PSB1_SIOF1_MCK, PSB0_SIUAOSLD, PSB0_SIOF1_TXD,
+	PSC15_SIUAISLD, PSC15_SIOF1_RXD, PSC14_SIUAOBT, PSC14_SIOF1_SCK,
+	PSC13_SIUAOLR, PSC13_SIOF1_SYNC, PSC12_SIUAIBT, PSC12_SIOF1_SS1,
+	PSC11_SIUAILR, PSC11_SIOF1_SS2, PSC0_NAF, PSC0_VIO,
+	PSD13_VIO, PSD13_SCIF2, PSD12_VIO, PSD12_SCIF1,
+	PSD11_VIO, PSD11_SCIF1, PSD10_VIO_D0, PSD10_LCDLCLK,
+	PSD9_SIOMCK_SIUMCKB, PSD9_SIUFCKB, PSD8_SCIF0_SCK, PSD8_TPUTO,
+	PSD7_SCIF0_RTS, PSD7_SIUAOSPD, PSD6_SCIF0_CTS, PSD6_SIUAISPD,
+	PSD5_CS6B_CE1B, PSD5_LCDCS2,
+	PSD3_LCDVEPWC_LCDVCPWC, PSD3_LCDVEPWC2_LCDVCPWC2,
+	PSD2_LCDDON, PSD2_LCDDON2, PSD0_LCDD19_LCDD0, PSD0_DV,
+	PSE15_SIOF0_MCK_IRQ3, PSE15_SIM_D,
+	PSE14_SIOF0_TXD_IRDA_OUT, PSE14_SIM_CLK,
+	PSE13_SIOF0_RXD_IRDA_IN, PSE13_TS_SDAT, PSE12_LCDVSYN2, PSE12_DACK,
+	PSE11_SIUMCKA_SIOF1_MCK, PSE11_SIUFCKA,
+	PSE3_FLCTL, PSE3_VIO, PSE2_NAF2, PSE2_VIO_D10,
+	PSE1_NAF1, PSE1_VIO_D9, PSE0_NAF0, PSE0_VIO_D8,
+
+	HIZA14_KEYSC, HIZA14_HIZ,
+	HIZA10_NAF, HIZA10_HIZ,
+	HIZA9_VIO, HIZA9_HIZ,
+	HIZA8_LCDC, HIZA8_HIZ,
+	HIZA7_LCDC, HIZA7_HIZ,
+	HIZA6_LCDC, HIZA6_HIZ,
+	HIZB1_VIO, HIZB1_HIZ,
+	HIZB0_VIO, HIZB0_HIZ,
+	HIZC15_IRQ7, HIZC15_HIZ,
+	HIZC14_IRQ6, HIZC14_HIZ,
+	HIZC13_IRQ5, HIZC13_HIZ,
+	HIZC12_IRQ4, HIZC12_HIZ,
+	HIZC11_IRQ3, HIZC11_HIZ,
+	HIZC10_IRQ2, HIZC10_HIZ,
+	HIZC9_IRQ1, HIZC9_HIZ,
+	HIZC8_IRQ0, HIZC8_HIZ,
+	MSELB9_VIO, MSELB9_VIO2,
+	MSELB8_RGB, MSELB8_SYS,
+	PINMUX_FUNCTION_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+	/* PTA */
+	PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_IN_PD, PTA7_OUT),
+	PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_IN_PD),
+	PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_IN_PD, PTA5_OUT),
+	PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_IN_PD),
+	PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_IN_PD),
+	PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_IN_PD),
+	PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_IN_PD),
+	PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_IN_PD),
+
+	/* PTB */
+	PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
+	PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
+	PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
+	PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
+	PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
+	PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
+	PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
+	PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
+
+	/* PTC */
+	PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_IN_PU),
+	PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_IN_PU),
+	PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
+	PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
+	PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
+	PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
+
+	/* PTD */
+	PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_IN_PU),
+	PINMUX_DATA(PTD6_DATA, PTD6_OUT, PTD6_IN, PTD6_IN_PU),
+	PINMUX_DATA(PTD5_DATA, PTD5_OUT, PTD5_IN, PTD5_IN_PU),
+	PINMUX_DATA(PTD4_DATA, PTD4_OUT, PTD4_IN, PTD4_IN_PU),
+	PINMUX_DATA(PTD3_DATA, PTD3_OUT, PTD3_IN, PTD3_IN_PU),
+	PINMUX_DATA(PTD2_DATA, PTD2_OUT, PTD2_IN, PTD2_IN_PU),
+	PINMUX_DATA(PTD1_DATA, PTD1_OUT, PTD1_IN, PTD1_IN_PU),
+	PINMUX_DATA(PTD0_DATA, PTD0_OUT),
+
+	/* PTE */
+	PINMUX_DATA(PTE7_DATA, PTE7_OUT, PTE7_IN, PTE7_IN_PD),
+	PINMUX_DATA(PTE6_DATA, PTE6_OUT, PTE6_IN, PTE6_IN_PD),
+	PINMUX_DATA(PTE5_DATA, PTE5_OUT, PTE5_IN, PTE5_IN_PD),
+	PINMUX_DATA(PTE4_DATA, PTE4_OUT, PTE4_IN, PTE4_IN_PD),
+	PINMUX_DATA(PTE1_DATA, PTE1_OUT, PTE1_IN, PTE1_IN_PD),
+	PINMUX_DATA(PTE0_DATA, PTE0_OUT, PTE0_IN, PTE0_IN_PD),
+
+	/* PTF */
+	PINMUX_DATA(PTF6_DATA, PTF6_OUT, PTF6_IN, PTF6_IN_PD),
+	PINMUX_DATA(PTF5_DATA, PTF5_OUT, PTF5_IN, PTF5_IN_PD),
+	PINMUX_DATA(PTF4_DATA, PTF4_OUT, PTF4_IN, PTF4_IN_PD),
+	PINMUX_DATA(PTF3_DATA, PTF3_OUT, PTF3_IN, PTF3_IN_PD),
+	PINMUX_DATA(PTF2_DATA, PTF2_OUT, PTF2_IN, PTF2_IN_PD),
+	PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_IN_PD),
+	PINMUX_DATA(PTF0_DATA, PTF0_OUT),
+
+	/* PTG */
+	PINMUX_DATA(PTG4_DATA, PTG4_OUT),
+	PINMUX_DATA(PTG3_DATA, PTG3_OUT),
+	PINMUX_DATA(PTG2_DATA, PTG2_OUT),
+	PINMUX_DATA(PTG1_DATA, PTG1_OUT),
+	PINMUX_DATA(PTG0_DATA, PTG0_OUT),
+
+	/* PTH */
+	PINMUX_DATA(PTH7_DATA, PTH7_OUT),
+	PINMUX_DATA(PTH6_DATA, PTH6_OUT, PTH6_IN, PTH6_IN_PD),
+	PINMUX_DATA(PTH5_DATA, PTH5_OUT, PTH5_IN, PTH5_IN_PD),
+	PINMUX_DATA(PTH4_DATA, PTH4_OUT),
+	PINMUX_DATA(PTH3_DATA, PTH3_OUT),
+	PINMUX_DATA(PTH2_DATA, PTH2_OUT),
+	PINMUX_DATA(PTH1_DATA, PTH1_OUT, PTH1_IN, PTH1_IN_PD),
+	PINMUX_DATA(PTH0_DATA, PTH0_OUT, PTH0_IN, PTH0_IN_PD),
+
+	/* PTJ */
+	PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
+	PINMUX_DATA(PTJ6_DATA, PTJ6_OUT),
+	PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
+	PINMUX_DATA(PTJ1_DATA, PTJ1_OUT, PTJ1_IN, PTJ1_IN_PU),
+	PINMUX_DATA(PTJ0_DATA, PTJ0_OUT, PTJ0_IN, PTJ0_IN_PU),
+
+	/* PTK */
+	PINMUX_DATA(PTK6_DATA, PTK6_OUT, PTK6_IN, PTK6_IN_PD),
+	PINMUX_DATA(PTK5_DATA, PTK5_OUT, PTK5_IN, PTK5_IN_PD),
+	PINMUX_DATA(PTK4_DATA, PTK4_OUT, PTK4_IN, PTK4_IN_PD),
+	PINMUX_DATA(PTK3_DATA, PTK3_OUT, PTK3_IN, PTK3_IN_PD),
+	PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_IN_PD),
+	PINMUX_DATA(PTK1_DATA, PTK1_OUT),
+	PINMUX_DATA(PTK0_DATA, PTK0_OUT, PTK0_IN, PTK0_IN_PD),
+
+	/* PTL */
+	PINMUX_DATA(PTL7_DATA, PTL7_OUT, PTL7_IN, PTL7_IN_PD),
+	PINMUX_DATA(PTL6_DATA, PTL6_OUT, PTL6_IN, PTL6_IN_PD),
+	PINMUX_DATA(PTL5_DATA, PTL5_OUT, PTL5_IN, PTL5_IN_PD),
+	PINMUX_DATA(PTL4_DATA, PTL4_OUT, PTL4_IN, PTL4_IN_PD),
+	PINMUX_DATA(PTL3_DATA, PTL3_OUT, PTL3_IN, PTL3_IN_PD),
+	PINMUX_DATA(PTL2_DATA, PTL2_OUT, PTL2_IN, PTL2_IN_PD),
+	PINMUX_DATA(PTL1_DATA, PTL1_OUT, PTL1_IN, PTL1_IN_PD),
+	PINMUX_DATA(PTL0_DATA, PTL0_OUT, PTL0_IN, PTL0_IN_PD),
+
+	/* PTM */
+	PINMUX_DATA(PTM7_DATA, PTM7_OUT, PTM7_IN, PTM7_IN_PD),
+	PINMUX_DATA(PTM6_DATA, PTM6_OUT, PTM6_IN, PTM6_IN_PD),
+	PINMUX_DATA(PTM5_DATA, PTM5_OUT, PTM5_IN, PTM5_IN_PD),
+	PINMUX_DATA(PTM4_DATA, PTM4_OUT, PTM4_IN, PTM4_IN_PD),
+	PINMUX_DATA(PTM3_DATA, PTM3_OUT, PTM3_IN, PTM3_IN_PD),
+	PINMUX_DATA(PTM2_DATA, PTM2_OUT, PTM2_IN, PTM2_IN_PD),
+	PINMUX_DATA(PTM1_DATA, PTM1_OUT, PTM1_IN, PTM1_IN_PD),
+	PINMUX_DATA(PTM0_DATA, PTM0_OUT, PTM0_IN, PTM0_IN_PD),
+
+	/* PTN */
+	PINMUX_DATA(PTN7_DATA, PTN7_OUT, PTN7_IN),
+	PINMUX_DATA(PTN6_DATA, PTN6_OUT, PTN6_IN),
+	PINMUX_DATA(PTN5_DATA, PTN5_OUT, PTN5_IN),
+	PINMUX_DATA(PTN4_DATA, PTN4_OUT, PTN4_IN),
+	PINMUX_DATA(PTN3_DATA, PTN3_OUT, PTN3_IN),
+	PINMUX_DATA(PTN2_DATA, PTN2_OUT, PTN2_IN),
+	PINMUX_DATA(PTN1_DATA, PTN1_OUT, PTN1_IN),
+	PINMUX_DATA(PTN0_DATA, PTN0_OUT, PTN0_IN),
+
+	/* PTQ */
+	PINMUX_DATA(PTQ6_DATA, PTQ6_OUT),
+	PINMUX_DATA(PTQ5_DATA, PTQ5_OUT, PTQ5_IN, PTQ5_IN_PD),
+	PINMUX_DATA(PTQ4_DATA, PTQ4_OUT, PTQ4_IN, PTQ4_IN_PD),
+	PINMUX_DATA(PTQ3_DATA, PTQ3_OUT, PTQ3_IN, PTQ3_IN_PD),
+	PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_IN_PD),
+	PINMUX_DATA(PTQ1_DATA, PTQ1_OUT),
+	PINMUX_DATA(PTQ0_DATA, PTQ0_OUT, PTQ0_IN, PTQ0_IN_PU),
+
+	/* PTR */
+	PINMUX_DATA(PTR4_DATA, PTR4_OUT),
+	PINMUX_DATA(PTR3_DATA, PTR3_OUT),
+	PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_IN_PU),
+	PINMUX_DATA(PTR1_DATA, PTR1_OUT),
+	PINMUX_DATA(PTR0_DATA, PTR0_OUT),
+
+	/* PTS */
+	PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_IN_PD),
+	PINMUX_DATA(PTS3_DATA, PTS3_OUT),
+	PINMUX_DATA(PTS2_DATA, PTS2_OUT, PTS2_IN, PTS2_IN_PD),
+	PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_IN_PD),
+	PINMUX_DATA(PTS0_DATA, PTS0_OUT),
+
+	/* PTT */
+	PINMUX_DATA(PTT4_DATA, PTT4_OUT, PTT4_IN, PTT4_IN_PD),
+	PINMUX_DATA(PTT3_DATA, PTT3_OUT, PTT3_IN, PTT3_IN_PD),
+	PINMUX_DATA(PTT2_DATA, PTT2_OUT, PTT2_IN, PTT2_IN_PD),
+	PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_IN_PD),
+	PINMUX_DATA(PTT0_DATA, PTT0_OUT),
+
+	/* PTU */
+	PINMUX_DATA(PTU4_DATA, PTU4_OUT, PTU4_IN, PTU4_IN_PD),
+	PINMUX_DATA(PTU3_DATA, PTU3_OUT, PTU3_IN, PTU3_IN_PD),
+	PINMUX_DATA(PTU2_DATA, PTU2_OUT, PTU2_IN, PTU2_IN_PD),
+	PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_IN_PD),
+	PINMUX_DATA(PTU0_DATA, PTU0_OUT, PTU0_IN, PTU0_IN_PD),
+
+	/* PTV */
+	PINMUX_DATA(PTV4_DATA, PTV4_OUT, PTV4_IN, PTV4_IN_PD),
+	PINMUX_DATA(PTV3_DATA, PTV3_OUT, PTV3_IN, PTV3_IN_PD),
+	PINMUX_DATA(PTV2_DATA, PTV2_OUT, PTV2_IN, PTV2_IN_PD),
+	PINMUX_DATA(PTV1_DATA, PTV1_OUT, PTV1_IN, PTV1_IN_PD),
+	PINMUX_DATA(PTV0_DATA, PTV0_OUT, PTV0_IN, PTV0_IN_PD),
+
+	/* PTW */
+	PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_IN_PD),
+	PINMUX_DATA(PTW5_DATA, PTW5_OUT),
+	PINMUX_DATA(PTW4_DATA, PTW4_OUT, PTW4_IN, PTW4_IN_PD),
+	PINMUX_DATA(PTW3_DATA, PTW3_OUT, PTW3_IN, PTW3_IN_PD),
+	PINMUX_DATA(PTW2_DATA, PTW2_OUT, PTW2_IN, PTW2_IN_PD),
+	PINMUX_DATA(PTW1_DATA, PTW1_OUT, PTW1_IN, PTW1_IN_PD),
+	PINMUX_DATA(PTW0_DATA, PTW0_OUT, PTW0_IN, PTW0_IN_PD),
+
+	/* PTX */
+	PINMUX_DATA(PTX6_DATA, PTX6_OUT, PTX6_IN, PTX6_IN_PD),
+	PINMUX_DATA(PTX5_DATA, PTX5_OUT, PTX5_IN, PTX5_IN_PD),
+	PINMUX_DATA(PTX4_DATA, PTX4_OUT, PTX4_IN, PTX4_IN_PD),
+	PINMUX_DATA(PTX3_DATA, PTX3_OUT, PTX3_IN, PTX3_IN_PD),
+	PINMUX_DATA(PTX2_DATA, PTX2_OUT, PTX2_IN, PTX2_IN_PD),
+	PINMUX_DATA(PTX1_DATA, PTX1_OUT, PTX1_IN, PTX1_IN_PD),
+	PINMUX_DATA(PTX0_DATA, PTX0_OUT, PTX0_IN, PTX0_IN_PD),
+
+	/* PTY */
+	PINMUX_DATA(PTY5_DATA, PTY5_OUT, PTY5_IN, PTY5_IN_PU),
+	PINMUX_DATA(PTY4_DATA, PTY4_OUT, PTY4_IN, PTY4_IN_PU),
+	PINMUX_DATA(PTY3_DATA, PTY3_OUT, PTY3_IN, PTY3_IN_PU),
+	PINMUX_DATA(PTY2_DATA, PTY2_OUT, PTY2_IN, PTY2_IN_PU),
+	PINMUX_DATA(PTY1_DATA, PTY1_OUT),
+	PINMUX_DATA(PTY0_DATA, PTY0_OUT, PTY0_IN, PTY0_IN_PU),
+
+	/* PTZ */
+	PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_IN_PU),
+	PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_IN_PU),
+	PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_IN_PU),
+	PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_IN_PU),
+	PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_IN_PU),
+
+	/* SCIF0 */
+	PINMUX_DATA(SCIF0_TXD_MARK, SCIF0_TXD),
+	PINMUX_DATA(SCIF0_RXD_MARK, SCIF0_RXD),
+	PINMUX_DATA(SCIF0_RTS_MARK, PSD7_SCIF0_RTS, SCIF0_RTS_SIUAOSPD),
+	PINMUX_DATA(SCIF0_CTS_MARK, PSD6_SCIF0_CTS, SCIF0_CTS_SIUAISPD),
+	PINMUX_DATA(SCIF0_SCK_MARK, PSD8_SCIF0_SCK, SCIF0_SCK_TPUTO),
+
+	/* SCIF1 */
+	PINMUX_DATA(SCIF1_TXD_MARK, PSD11_SCIF1, VIO_D5_SCIF1_TXD),
+	PINMUX_DATA(SCIF1_RXD_MARK, PSD11_SCIF1, VIO_D6_SCIF1_RXD),
+	PINMUX_DATA(SCIF1_RTS_MARK, PSD12_SCIF1, VIO_CLK_SCIF1_RTS),
+	PINMUX_DATA(SCIF1_CTS_MARK, PSD12_SCIF1, VIO_VD_SCIF1_CTS),
+	PINMUX_DATA(SCIF1_SCK_MARK, PSD11_SCIF1, VIO_D7_SCIF1_SCK),
+
+	/* SCIF2 */
+	PINMUX_DATA(SCIF2_TXD_MARK, PSD13_SCIF2, VIO_STEM_SCIF2_TXD),
+	PINMUX_DATA(SCIF2_RXD_MARK, PSD13_SCIF2, VIO_HD_SCIF2_RXD),
+	PINMUX_DATA(SCIF2_RTS_MARK, PSD13_SCIF2, VIO_CKO_SCIF2_RTS),
+	PINMUX_DATA(SCIF2_CTS_MARK, PSD13_SCIF2, VIO_FLD_SCIF2_CTS),
+	PINMUX_DATA(SCIF2_SCK_MARK, PSD13_SCIF2, VIO_STEX_SCIF2_SCK),
+
+	/* SIO */
+	PINMUX_DATA(SIOTXD_MARK, PSB15_SIOTXD, SIOTXD_SIUBOSLD),
+	PINMUX_DATA(SIORXD_MARK, PSB14_SIORXD, SIORXD_SIUBISLD),
+	PINMUX_DATA(SIOD_MARK, PSB13_SIOD, SIOD_SIUBILR),
+	PINMUX_DATA(SIOSTRB0_MARK, PSB12_SIOSTRB0, SIOSTRB0_SIUBIBT),
+	PINMUX_DATA(SIOSTRB1_MARK, PSB11_SIOSTRB1, SIOSTRB1_SIUBOLR),
+	PINMUX_DATA(SIOSCK_MARK, PSB10_SIOSCK, SIOSCK_SIUBOBT),
+	PINMUX_DATA(SIOMCK_MARK, PSD9_SIOMCK_SIUMCKB, PSB9_SIOMCK, PTF6),
+
+	/* CEU */
+	PINMUX_DATA(VIO_D15_MARK, PSC0_VIO, HIZA10_NAF, NAF7_VIO_D15),
+	PINMUX_DATA(VIO_D14_MARK, PSC0_VIO, HIZA10_NAF, NAF6_VIO_D14),
+	PINMUX_DATA(VIO_D13_MARK, PSC0_VIO, HIZA10_NAF, NAF5_VIO_D13),
+	PINMUX_DATA(VIO_D12_MARK, PSC0_VIO, HIZA10_NAF, NAF4_VIO_D12),
+	PINMUX_DATA(VIO_D11_MARK, PSC0_VIO, HIZA10_NAF, NAF3_VIO_D11),
+	PINMUX_DATA(VIO_D10_MARK, PSE2_VIO_D10, HIZB0_VIO, NAF2_VIO_D10),
+	PINMUX_DATA(VIO_D9_MARK, PSE1_VIO_D9, HIZB0_VIO, NAF1_VIO_D9),
+	PINMUX_DATA(VIO_D8_MARK, PSE0_VIO_D8, HIZB0_VIO, NAF0_VIO_D8),
+	PINMUX_DATA(VIO_D7_MARK, PSD11_VIO, VIO_D7_SCIF1_SCK),
+	PINMUX_DATA(VIO_D6_MARK, PSD11_VIO, VIO_D6_SCIF1_RXD),
+	PINMUX_DATA(VIO_D5_MARK, PSD11_VIO, VIO_D5_SCIF1_TXD),
+	PINMUX_DATA(VIO_D4_MARK, VIO_D4),
+	PINMUX_DATA(VIO_D3_MARK, VIO_D3),
+	PINMUX_DATA(VIO_D2_MARK, VIO_D2),
+	PINMUX_DATA(VIO_D1_MARK, VIO_D1),
+	PINMUX_DATA(VIO_D0_MARK, PSD10_VIO_D0, VIO_D0_LCDLCLK),
+	PINMUX_DATA(VIO_CLK_MARK, PSD12_VIO, MSELB9_VIO, VIO_CLK_SCIF1_RTS),
+	PINMUX_DATA(VIO_VD_MARK, PSD12_VIO, MSELB9_VIO, VIO_VD_SCIF1_CTS),
+	PINMUX_DATA(VIO_HD_MARK, PSD13_VIO, MSELB9_VIO, VIO_HD_SCIF2_RXD),
+	PINMUX_DATA(VIO_FLD_MARK, PSD13_VIO, HIZA9_VIO, VIO_FLD_SCIF2_CTS),
+	PINMUX_DATA(VIO_CKO_MARK, PSD13_VIO, HIZA9_VIO, VIO_CKO_SCIF2_RTS),
+	PINMUX_DATA(VIO_STEX_MARK, PSD13_VIO, HIZA9_VIO, VIO_STEX_SCIF2_SCK),
+	PINMUX_DATA(VIO_STEM_MARK, PSD13_VIO, HIZA9_VIO, VIO_STEM_SCIF2_TXD),
+	PINMUX_DATA(VIO_VD2_MARK, PSE3_VIO, MSELB9_VIO2,
+		    HIZB0_VIO, FOE_VIO_VD2),
+	PINMUX_DATA(VIO_HD2_MARK, PSE3_VIO, MSELB9_VIO2,
+		    HIZB1_VIO, HIZB1_VIO, FCE_VIO_HD2),
+	PINMUX_DATA(VIO_CLK2_MARK, PSE3_VIO, MSELB9_VIO2,
+		    HIZB1_VIO, FRB_VIO_CLK2),
+
+	/* LCDC */
+	PINMUX_DATA(LCDD23_MARK, HIZA8_LCDC, LCDD23),
+	PINMUX_DATA(LCDD22_MARK, HIZA8_LCDC, LCDD22),
+	PINMUX_DATA(LCDD21_MARK, HIZA8_LCDC, LCDD21),
+	PINMUX_DATA(LCDD20_MARK, HIZA8_LCDC, LCDD20),
+	PINMUX_DATA(LCDD19_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD19_DV_CLKI),
+	PINMUX_DATA(LCDD18_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD18_DV_CLK),
+	PINMUX_DATA(LCDD17_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC,
+		    LCDD17_DV_HSYNC),
+	PINMUX_DATA(LCDD16_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC,
+		    LCDD16_DV_VSYNC),
+	PINMUX_DATA(LCDD15_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD15_DV_D15),
+	PINMUX_DATA(LCDD14_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD14_DV_D14),
+	PINMUX_DATA(LCDD13_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD13_DV_D13),
+	PINMUX_DATA(LCDD12_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD12_DV_D12),
+	PINMUX_DATA(LCDD11_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD11_DV_D11),
+	PINMUX_DATA(LCDD10_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD10_DV_D10),
+	PINMUX_DATA(LCDD9_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD9_DV_D9),
+	PINMUX_DATA(LCDD8_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD8_DV_D8),
+	PINMUX_DATA(LCDD7_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD7_DV_D7),
+	PINMUX_DATA(LCDD6_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD6_DV_D6),
+	PINMUX_DATA(LCDD5_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD5_DV_D5),
+	PINMUX_DATA(LCDD4_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD4_DV_D4),
+	PINMUX_DATA(LCDD3_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD3_DV_D3),
+	PINMUX_DATA(LCDD2_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD2_DV_D2),
+	PINMUX_DATA(LCDD1_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD1_DV_D1),
+	PINMUX_DATA(LCDD0_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD0_DV_D0),
+	PINMUX_DATA(LCDLCLK_MARK, PSD10_LCDLCLK, VIO_D0_LCDLCLK),
+	/* Main LCD */
+	PINMUX_DATA(LCDDON_MARK, PSD2_LCDDON, HIZA7_LCDC, LCDDON_LCDDON2),
+	PINMUX_DATA(LCDVCPWC_MARK, PSD3_LCDVEPWC_LCDVCPWC,
+		    HIZA6_LCDC, LCDVCPWC_LCDVCPWC2),
+	PINMUX_DATA(LCDVEPWC_MARK, PSD3_LCDVEPWC_LCDVCPWC,
+		    HIZA6_LCDC, LCDVEPWC_LCDVEPWC2),
+	PINMUX_DATA(LCDVSYN_MARK, HIZA7_LCDC, LCDVSYN),
+	/* Main LCD - RGB Mode */
+	PINMUX_DATA(LCDDCK_MARK, MSELB8_RGB, HIZA8_LCDC, LCDDCK_LCDWR),
+	PINMUX_DATA(LCDHSYN_MARK, MSELB8_RGB, HIZA7_LCDC, LCDHSYN_LCDCS),
+	PINMUX_DATA(LCDDISP_MARK, MSELB8_RGB, HIZA7_LCDC, LCDDISP_LCDRS),
+	/* Main LCD - SYS Mode */
+	PINMUX_DATA(LCDRS_MARK, MSELB8_SYS, HIZA7_LCDC, LCDDISP_LCDRS),
+	PINMUX_DATA(LCDCS_MARK, MSELB8_SYS, HIZA7_LCDC, LCDHSYN_LCDCS),
+	PINMUX_DATA(LCDWR_MARK, MSELB8_SYS, HIZA8_LCDC, LCDDCK_LCDWR),
+	PINMUX_DATA(LCDRD_MARK, HIZA7_LCDC, LCDRD),
+	/* Sub LCD - SYS Mode */
+	PINMUX_DATA(LCDDON2_MARK, PSD2_LCDDON2, HIZA7_LCDC, LCDDON_LCDDON2),
+	PINMUX_DATA(LCDVCPWC2_MARK, PSD3_LCDVEPWC2_LCDVCPWC2,
+		    HIZA6_LCDC, LCDVCPWC_LCDVCPWC2),
+	PINMUX_DATA(LCDVEPWC2_MARK, PSD3_LCDVEPWC2_LCDVCPWC2,
+		    HIZA6_LCDC, LCDVEPWC_LCDVEPWC2),
+	PINMUX_DATA(LCDVSYN2_MARK, PSE12_LCDVSYN2, HIZA8_LCDC, LCDVSYN2_DACK),
+	PINMUX_DATA(LCDCS2_MARK, PSD5_LCDCS2, CS6B_CE1B_LCDCS2),
+
+	/* BSC */
+	PINMUX_DATA(IOIS16_MARK, IOIS16),
+	PINMUX_DATA(A25_MARK, A25),
+	PINMUX_DATA(A24_MARK, A24),
+	PINMUX_DATA(A23_MARK, A23),
+	PINMUX_DATA(A22_MARK, A22),
+	PINMUX_DATA(BS_MARK, PSA9_BS, IRQ4_BS),
+	PINMUX_DATA(CS6B_CE1B_MARK, PSD5_CS6B_CE1B, CS6B_CE1B_LCDCS2),
+	PINMUX_DATA(WAIT_MARK, WAIT),
+	PINMUX_DATA(CS6A_CE2B_MARK, CS6A_CE2B),
+
+	/* SBSC */
+	PINMUX_DATA(HPD63_MARK, HPD63),
+	PINMUX_DATA(HPD62_MARK, HPD62),
+	PINMUX_DATA(HPD61_MARK, HPD61),
+	PINMUX_DATA(HPD60_MARK, HPD60),
+	PINMUX_DATA(HPD59_MARK, HPD59),
+	PINMUX_DATA(HPD58_MARK, HPD58),
+	PINMUX_DATA(HPD57_MARK, HPD57),
+	PINMUX_DATA(HPD56_MARK, HPD56),
+	PINMUX_DATA(HPD55_MARK, HPD55),
+	PINMUX_DATA(HPD54_MARK, HPD54),
+	PINMUX_DATA(HPD53_MARK, HPD53),
+	PINMUX_DATA(HPD52_MARK, HPD52),
+	PINMUX_DATA(HPD51_MARK, HPD51),
+	PINMUX_DATA(HPD50_MARK, HPD50),
+	PINMUX_DATA(HPD49_MARK, HPD49),
+	PINMUX_DATA(HPD48_MARK, HPD48),
+	PINMUX_DATA(HPDQM7_MARK, HPDQM7),
+	PINMUX_DATA(HPDQM6_MARK, HPDQM6),
+	PINMUX_DATA(HPDQM5_MARK, HPDQM5),
+	PINMUX_DATA(HPDQM4_MARK, HPDQM4),
+
+	/* IRQ */
+	PINMUX_DATA(IRQ0_MARK, HIZC8_IRQ0, IRQ0),
+	PINMUX_DATA(IRQ1_MARK, HIZC9_IRQ1, IRQ1),
+	PINMUX_DATA(IRQ2_MARK, PSA4_IRQ2, HIZC10_IRQ2, IRQ2_SDHID2),
+	PINMUX_DATA(IRQ3_MARK, PSE15_SIOF0_MCK_IRQ3, PSB8_IRQ3,
+		    HIZC11_IRQ3, PTQ0),
+	PINMUX_DATA(IRQ4_MARK, PSA9_IRQ4, HIZC12_IRQ4, IRQ4_BS),
+	PINMUX_DATA(IRQ5_MARK, HIZC13_IRQ5, IRQ5),
+	PINMUX_DATA(IRQ6_MARK, PSA15_IRQ6, HIZC14_IRQ6, KEYIN0_IRQ6),
+	PINMUX_DATA(IRQ7_MARK, PSA14_IRQ7, HIZC15_IRQ7, KEYIN4_IRQ7),
+
+	/* SDHI */
+	PINMUX_DATA(SDHICD_MARK, SDHICD),
+	PINMUX_DATA(SDHIWP_MARK, SDHIWP),
+	PINMUX_DATA(SDHID3_MARK, SDHID3),
+	PINMUX_DATA(SDHID2_MARK, PSA4_SDHID2, IRQ2_SDHID2),
+	PINMUX_DATA(SDHID1_MARK, SDHID1),
+	PINMUX_DATA(SDHID0_MARK, SDHID0),
+	PINMUX_DATA(SDHICMD_MARK, SDHICMD),
+	PINMUX_DATA(SDHICLK_MARK, SDHICLK),
+
+	/* SIU - Port A */
+	PINMUX_DATA(SIUAOLR_MARK, PSC13_SIUAOLR, SIUAOLR_SIOF1_SYNC),
+	PINMUX_DATA(SIUAOBT_MARK, PSC14_SIUAOBT, SIUAOBT_SIOF1_SCK),
+	PINMUX_DATA(SIUAISLD_MARK, PSC15_SIUAISLD, SIUAISLD_SIOF1_RXD),
+	PINMUX_DATA(SIUAILR_MARK, PSC11_SIUAILR, SIUAILR_SIOF1_SS2),
+	PINMUX_DATA(SIUAIBT_MARK, PSC12_SIUAIBT, SIUAIBT_SIOF1_SS1),
+	PINMUX_DATA(SIUAOSLD_MARK, PSB0_SIUAOSLD, SIUAOSLD_SIOF1_TXD),
+	PINMUX_DATA(SIUMCKA_MARK, PSE11_SIUMCKA_SIOF1_MCK, PSB1_SIUMCKA, PTK0),
+	PINMUX_DATA(SIUFCKA_MARK, PSE11_SIUFCKA, PTK0),
+
+	/* SIU - Port B */
+	PINMUX_DATA(SIUBOLR_MARK, PSB11_SIUBOLR, SIOSTRB1_SIUBOLR),
+	PINMUX_DATA(SIUBOBT_MARK, PSB10_SIUBOBT, SIOSCK_SIUBOBT),
+	PINMUX_DATA(SIUBISLD_MARK, PSB14_SIUBISLD, SIORXD_SIUBISLD),
+	PINMUX_DATA(SIUBILR_MARK, PSB13_SIUBILR, SIOD_SIUBILR),
+	PINMUX_DATA(SIUBIBT_MARK, PSB12_SIUBIBT, SIOSTRB0_SIUBIBT),
+	PINMUX_DATA(SIUBOSLD_MARK, PSB15_SIUBOSLD, SIOTXD_SIUBOSLD),
+	PINMUX_DATA(SIUMCKB_MARK, PSD9_SIOMCK_SIUMCKB, PSB9_SIUMCKB, PTF6),
+	PINMUX_DATA(SIUFCKB_MARK, PSD9_SIUFCKB, PTF6),
+
+	/* AUD */
+	PINMUX_DATA(AUDSYNC_MARK, AUDSYNC),
+	PINMUX_DATA(AUDATA3_MARK, AUDATA3),
+	PINMUX_DATA(AUDATA2_MARK, AUDATA2),
+	PINMUX_DATA(AUDATA1_MARK, AUDATA1),
+	PINMUX_DATA(AUDATA0_MARK, AUDATA0),
+
+	/* DMAC */
+	PINMUX_DATA(DACK_MARK, PSE12_DACK, LCDVSYN2_DACK),
+	PINMUX_DATA(DREQ0_MARK, DREQ0),
+
+	/* VOU */
+	PINMUX_DATA(DV_CLKI_MARK, PSD0_DV, LCDD19_DV_CLKI),
+	PINMUX_DATA(DV_CLK_MARK, PSD0_DV, LCDD18_DV_CLK),
+	PINMUX_DATA(DV_HSYNC_MARK, PSD0_DV, LCDD17_DV_HSYNC),
+	PINMUX_DATA(DV_VSYNC_MARK, PSD0_DV, LCDD16_DV_VSYNC),
+	PINMUX_DATA(DV_D15_MARK, PSD0_DV, LCDD15_DV_D15),
+	PINMUX_DATA(DV_D14_MARK, PSD0_DV, LCDD14_DV_D14),
+	PINMUX_DATA(DV_D13_MARK, PSD0_DV, LCDD13_DV_D13),
+	PINMUX_DATA(DV_D12_MARK, PSD0_DV, LCDD12_DV_D12),
+	PINMUX_DATA(DV_D11_MARK, PSD0_DV, LCDD11_DV_D11),
+	PINMUX_DATA(DV_D10_MARK, PSD0_DV, LCDD10_DV_D10),
+	PINMUX_DATA(DV_D9_MARK, PSD0_DV, LCDD9_DV_D9),
+	PINMUX_DATA(DV_D8_MARK, PSD0_DV, LCDD8_DV_D8),
+	PINMUX_DATA(DV_D7_MARK, PSD0_DV, LCDD7_DV_D7),
+	PINMUX_DATA(DV_D6_MARK, PSD0_DV, LCDD6_DV_D6),
+	PINMUX_DATA(DV_D5_MARK, PSD0_DV, LCDD5_DV_D5),
+	PINMUX_DATA(DV_D4_MARK, PSD0_DV, LCDD4_DV_D4),
+	PINMUX_DATA(DV_D3_MARK, PSD0_DV, LCDD3_DV_D3),
+	PINMUX_DATA(DV_D2_MARK, PSD0_DV, LCDD2_DV_D2),
+	PINMUX_DATA(DV_D1_MARK, PSD0_DV, LCDD1_DV_D1),
+	PINMUX_DATA(DV_D0_MARK, PSD0_DV, LCDD0_DV_D0),
+
+	/* CPG */
+	PINMUX_DATA(STATUS0_MARK, STATUS0),
+	PINMUX_DATA(PDSTATUS_MARK, PDSTATUS),
+
+	/* SIOF0 */
+	PINMUX_DATA(SIOF0_MCK_MARK, PSE15_SIOF0_MCK_IRQ3, PSB8_SIOF0_MCK, PTQ0),
+	PINMUX_DATA(SIOF0_SCK_MARK, PSB5_SIOF0_SCK, SIOF0_SCK_TS_SCK),
+	PINMUX_DATA(SIOF0_SYNC_MARK, PSB4_SIOF0_SYNC, SIOF0_SYNC_TS_SDEN),
+	PINMUX_DATA(SIOF0_SS1_MARK, PSB3_SIOF0_SS1, SIOF0_SS1_TS_SPSYNC),
+	PINMUX_DATA(SIOF0_SS2_MARK, PSB2_SIOF0_SS2, SIOF0_SS2_SIM_RST),
+	PINMUX_DATA(SIOF0_TXD_MARK, PSE14_SIOF0_TXD_IRDA_OUT,
+		    PSB7_SIOF0_TXD, PTQ1),
+	PINMUX_DATA(SIOF0_RXD_MARK, PSE13_SIOF0_RXD_IRDA_IN,
+		    PSB6_SIOF0_RXD, PTQ2),
+
+	/* SIOF1 */
+	PINMUX_DATA(SIOF1_MCK_MARK, PSE11_SIUMCKA_SIOF1_MCK,
+		    PSB1_SIOF1_MCK, PTK0),
+	PINMUX_DATA(SIOF1_SCK_MARK, PSC14_SIOF1_SCK, SIUAOBT_SIOF1_SCK),
+	PINMUX_DATA(SIOF1_SYNC_MARK, PSC13_SIOF1_SYNC, SIUAOLR_SIOF1_SYNC),
+	PINMUX_DATA(SIOF1_SS1_MARK, PSC12_SIOF1_SS1, SIUAIBT_SIOF1_SS1),
+	PINMUX_DATA(SIOF1_SS2_MARK, PSC11_SIOF1_SS2, SIUAILR_SIOF1_SS2),
+	PINMUX_DATA(SIOF1_TXD_MARK, PSB0_SIOF1_TXD, SIUAOSLD_SIOF1_TXD),
+	PINMUX_DATA(SIOF1_RXD_MARK, PSC15_SIOF1_RXD, SIUAISLD_SIOF1_RXD),
+
+	/* SIM */
+	PINMUX_DATA(SIM_D_MARK, PSE15_SIM_D, PTQ0),
+	PINMUX_DATA(SIM_CLK_MARK, PSE14_SIM_CLK, PTQ1),
+	PINMUX_DATA(SIM_RST_MARK, PSB2_SIM_RST, SIOF0_SS2_SIM_RST),
+
+	/* TSIF */
+	PINMUX_DATA(TS_SDAT_MARK, PSE13_TS_SDAT, PTQ2),
+	PINMUX_DATA(TS_SCK_MARK, PSB5_TS_SCK, SIOF0_SCK_TS_SCK),
+	PINMUX_DATA(TS_SDEN_MARK, PSB4_TS_SDEN, SIOF0_SYNC_TS_SDEN),
+	PINMUX_DATA(TS_SPSYNC_MARK, PSB3_TS_SPSYNC, SIOF0_SS1_TS_SPSYNC),
+
+	/* IRDA */
+	PINMUX_DATA(IRDA_IN_MARK, PSE13_SIOF0_RXD_IRDA_IN, PSB6_IRDA_IN, PTQ2),
+	PINMUX_DATA(IRDA_OUT_MARK, PSE14_SIOF0_TXD_IRDA_OUT,
+		    PSB7_IRDA_OUT, PTQ1),
+
+	/* TPU */
+	PINMUX_DATA(TPUTO_MARK, PSD8_TPUTO, SCIF0_SCK_TPUTO),
+
+	/* FLCTL */
+	PINMUX_DATA(FCE_MARK, PSE3_FLCTL, FCE_VIO_HD2),
+	PINMUX_DATA(NAF7_MARK, PSC0_NAF, HIZA10_NAF, NAF7_VIO_D15),
+	PINMUX_DATA(NAF6_MARK, PSC0_NAF, HIZA10_NAF, NAF6_VIO_D14),
+	PINMUX_DATA(NAF5_MARK, PSC0_NAF, HIZA10_NAF, NAF5_VIO_D13),
+	PINMUX_DATA(NAF4_MARK, PSC0_NAF, HIZA10_NAF, NAF4_VIO_D12),
+	PINMUX_DATA(NAF3_MARK, PSC0_NAF, HIZA10_NAF, NAF3_VIO_D11),
+	PINMUX_DATA(NAF2_MARK, PSE2_NAF2, HIZB0_VIO, NAF2_VIO_D10),
+	PINMUX_DATA(NAF1_MARK, PSE1_NAF1, HIZB0_VIO, NAF1_VIO_D9),
+	PINMUX_DATA(NAF0_MARK, PSE0_NAF0, HIZB0_VIO, NAF0_VIO_D8),
+	PINMUX_DATA(FCDE_MARK, FCDE),
+	PINMUX_DATA(FOE_MARK, PSE3_FLCTL, HIZB0_VIO, FOE_VIO_VD2),
+	PINMUX_DATA(FSC_MARK, FSC),
+	PINMUX_DATA(FWE_MARK, FWE),
+	PINMUX_DATA(FRB_MARK, PSE3_FLCTL, FRB_VIO_CLK2),
+
+	/* KEYSC */
+	PINMUX_DATA(KEYIN0_MARK, PSA15_KEYIN0, HIZC14_IRQ6, KEYIN0_IRQ6),
+	PINMUX_DATA(KEYIN1_MARK, HIZA14_KEYSC, KEYIN1),
+	PINMUX_DATA(KEYIN2_MARK, HIZA14_KEYSC, KEYIN2),
+	PINMUX_DATA(KEYIN3_MARK, HIZA14_KEYSC, KEYIN3),
+	PINMUX_DATA(KEYIN4_MARK, PSA14_KEYIN4, HIZC15_IRQ7, KEYIN4_IRQ7),
+	PINMUX_DATA(KEYOUT0_MARK, HIZA14_KEYSC, KEYOUT0),
+	PINMUX_DATA(KEYOUT1_MARK, HIZA14_KEYSC, KEYOUT1),
+	PINMUX_DATA(KEYOUT2_MARK, HIZA14_KEYSC, KEYOUT2),
+	PINMUX_DATA(KEYOUT3_MARK, HIZA14_KEYSC, KEYOUT3),
+	PINMUX_DATA(KEYOUT4_IN6_MARK, HIZA14_KEYSC, KEYOUT4_IN6),
+	PINMUX_DATA(KEYOUT5_IN5_MARK, HIZA14_KEYSC, KEYOUT5_IN5),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* PTA */
+	PINMUX_GPIO(GPIO_PTA7, PTA7_DATA),
+	PINMUX_GPIO(GPIO_PTA6, PTA6_DATA),
+	PINMUX_GPIO(GPIO_PTA5, PTA5_DATA),
+	PINMUX_GPIO(GPIO_PTA4, PTA4_DATA),
+	PINMUX_GPIO(GPIO_PTA3, PTA3_DATA),
+	PINMUX_GPIO(GPIO_PTA2, PTA2_DATA),
+	PINMUX_GPIO(GPIO_PTA1, PTA1_DATA),
+	PINMUX_GPIO(GPIO_PTA0, PTA0_DATA),
+
+	/* PTB */
+	PINMUX_GPIO(GPIO_PTB7, PTB7_DATA),
+	PINMUX_GPIO(GPIO_PTB6, PTB6_DATA),
+	PINMUX_GPIO(GPIO_PTB5, PTB5_DATA),
+	PINMUX_GPIO(GPIO_PTB4, PTB4_DATA),
+	PINMUX_GPIO(GPIO_PTB3, PTB3_DATA),
+	PINMUX_GPIO(GPIO_PTB2, PTB2_DATA),
+	PINMUX_GPIO(GPIO_PTB1, PTB1_DATA),
+	PINMUX_GPIO(GPIO_PTB0, PTB0_DATA),
+
+	/* PTC */
+	PINMUX_GPIO(GPIO_PTC7, PTC7_DATA),
+	PINMUX_GPIO(GPIO_PTC5, PTC5_DATA),
+	PINMUX_GPIO(GPIO_PTC4, PTC4_DATA),
+	PINMUX_GPIO(GPIO_PTC3, PTC3_DATA),
+	PINMUX_GPIO(GPIO_PTC2, PTC2_DATA),
+	PINMUX_GPIO(GPIO_PTC0, PTC0_DATA),
+
+	/* PTD */
+	PINMUX_GPIO(GPIO_PTD7, PTD7_DATA),
+	PINMUX_GPIO(GPIO_PTD6, PTD6_DATA),
+	PINMUX_GPIO(GPIO_PTD5, PTD5_DATA),
+	PINMUX_GPIO(GPIO_PTD4, PTD4_DATA),
+	PINMUX_GPIO(GPIO_PTD3, PTD3_DATA),
+	PINMUX_GPIO(GPIO_PTD2, PTD2_DATA),
+	PINMUX_GPIO(GPIO_PTD1, PTD1_DATA),
+	PINMUX_GPIO(GPIO_PTD0, PTD0_DATA),
+
+	/* PTE */
+	PINMUX_GPIO(GPIO_PTE7, PTE7_DATA),
+	PINMUX_GPIO(GPIO_PTE6, PTE6_DATA),
+	PINMUX_GPIO(GPIO_PTE5, PTE5_DATA),
+	PINMUX_GPIO(GPIO_PTE4, PTE4_DATA),
+	PINMUX_GPIO(GPIO_PTE1, PTE1_DATA),
+	PINMUX_GPIO(GPIO_PTE0, PTE0_DATA),
+
+	/* PTF */
+	PINMUX_GPIO(GPIO_PTF6, PTF6_DATA),
+	PINMUX_GPIO(GPIO_PTF5, PTF5_DATA),
+	PINMUX_GPIO(GPIO_PTF4, PTF4_DATA),
+	PINMUX_GPIO(GPIO_PTF3, PTF3_DATA),
+	PINMUX_GPIO(GPIO_PTF2, PTF2_DATA),
+	PINMUX_GPIO(GPIO_PTF1, PTF1_DATA),
+	PINMUX_GPIO(GPIO_PTF0, PTF0_DATA),
+
+	/* PTG */
+	PINMUX_GPIO(GPIO_PTG4, PTG4_DATA),
+	PINMUX_GPIO(GPIO_PTG3, PTG3_DATA),
+	PINMUX_GPIO(GPIO_PTG2, PTG2_DATA),
+	PINMUX_GPIO(GPIO_PTG1, PTG1_DATA),
+	PINMUX_GPIO(GPIO_PTG0, PTG0_DATA),
+
+	/* PTH */
+	PINMUX_GPIO(GPIO_PTH7, PTH7_DATA),
+	PINMUX_GPIO(GPIO_PTH6, PTH6_DATA),
+	PINMUX_GPIO(GPIO_PTH5, PTH5_DATA),
+	PINMUX_GPIO(GPIO_PTH4, PTH4_DATA),
+	PINMUX_GPIO(GPIO_PTH3, PTH3_DATA),
+	PINMUX_GPIO(GPIO_PTH2, PTH2_DATA),
+	PINMUX_GPIO(GPIO_PTH1, PTH1_DATA),
+	PINMUX_GPIO(GPIO_PTH0, PTH0_DATA),
+
+	/* PTJ */
+	PINMUX_GPIO(GPIO_PTJ7, PTJ7_DATA),
+	PINMUX_GPIO(GPIO_PTJ6, PTJ6_DATA),
+	PINMUX_GPIO(GPIO_PTJ5, PTJ5_DATA),
+	PINMUX_GPIO(GPIO_PTJ1, PTJ1_DATA),
+	PINMUX_GPIO(GPIO_PTJ0, PTJ0_DATA),
+
+	/* PTK */
+	PINMUX_GPIO(GPIO_PTK6, PTK6_DATA),
+	PINMUX_GPIO(GPIO_PTK5, PTK5_DATA),
+	PINMUX_GPIO(GPIO_PTK4, PTK4_DATA),
+	PINMUX_GPIO(GPIO_PTK3, PTK3_DATA),
+	PINMUX_GPIO(GPIO_PTK2, PTK2_DATA),
+	PINMUX_GPIO(GPIO_PTK1, PTK1_DATA),
+	PINMUX_GPIO(GPIO_PTK0, PTK0_DATA),
+
+	/* PTL */
+	PINMUX_GPIO(GPIO_PTL7, PTL7_DATA),
+	PINMUX_GPIO(GPIO_PTL6, PTL6_DATA),
+	PINMUX_GPIO(GPIO_PTL5, PTL5_DATA),
+	PINMUX_GPIO(GPIO_PTL4, PTL4_DATA),
+	PINMUX_GPIO(GPIO_PTL3, PTL3_DATA),
+	PINMUX_GPIO(GPIO_PTL2, PTL2_DATA),
+	PINMUX_GPIO(GPIO_PTL1, PTL1_DATA),
+	PINMUX_GPIO(GPIO_PTL0, PTL0_DATA),
+
+	/* PTM */
+	PINMUX_GPIO(GPIO_PTM7, PTM7_DATA),
+	PINMUX_GPIO(GPIO_PTM6, PTM6_DATA),
+	PINMUX_GPIO(GPIO_PTM5, PTM5_DATA),
+	PINMUX_GPIO(GPIO_PTM4, PTM4_DATA),
+	PINMUX_GPIO(GPIO_PTM3, PTM3_DATA),
+	PINMUX_GPIO(GPIO_PTM2, PTM2_DATA),
+	PINMUX_GPIO(GPIO_PTM1, PTM1_DATA),
+	PINMUX_GPIO(GPIO_PTM0, PTM0_DATA),
+
+	/* PTN */
+	PINMUX_GPIO(GPIO_PTN7, PTN7_DATA),
+	PINMUX_GPIO(GPIO_PTN6, PTN6_DATA),
+	PINMUX_GPIO(GPIO_PTN5, PTN5_DATA),
+	PINMUX_GPIO(GPIO_PTN4, PTN4_DATA),
+	PINMUX_GPIO(GPIO_PTN3, PTN3_DATA),
+	PINMUX_GPIO(GPIO_PTN2, PTN2_DATA),
+	PINMUX_GPIO(GPIO_PTN1, PTN1_DATA),
+	PINMUX_GPIO(GPIO_PTN0, PTN0_DATA),
+
+	/* PTQ */
+	PINMUX_GPIO(GPIO_PTQ6, PTQ6_DATA),
+	PINMUX_GPIO(GPIO_PTQ5, PTQ5_DATA),
+	PINMUX_GPIO(GPIO_PTQ4, PTQ4_DATA),
+	PINMUX_GPIO(GPIO_PTQ3, PTQ3_DATA),
+	PINMUX_GPIO(GPIO_PTQ2, PTQ2_DATA),
+	PINMUX_GPIO(GPIO_PTQ1, PTQ1_DATA),
+	PINMUX_GPIO(GPIO_PTQ0, PTQ0_DATA),
+
+	/* PTR */
+	PINMUX_GPIO(GPIO_PTR4, PTR4_DATA),
+	PINMUX_GPIO(GPIO_PTR3, PTR3_DATA),
+	PINMUX_GPIO(GPIO_PTR2, PTR2_DATA),
+	PINMUX_GPIO(GPIO_PTR1, PTR1_DATA),
+	PINMUX_GPIO(GPIO_PTR0, PTR0_DATA),
+
+	/* PTS */
+	PINMUX_GPIO(GPIO_PTS4, PTS4_DATA),
+	PINMUX_GPIO(GPIO_PTS3, PTS3_DATA),
+	PINMUX_GPIO(GPIO_PTS2, PTS2_DATA),
+	PINMUX_GPIO(GPIO_PTS1, PTS1_DATA),
+	PINMUX_GPIO(GPIO_PTS0, PTS0_DATA),
+
+	/* PTT */
+	PINMUX_GPIO(GPIO_PTT4, PTT4_DATA),
+	PINMUX_GPIO(GPIO_PTT3, PTT3_DATA),
+	PINMUX_GPIO(GPIO_PTT2, PTT2_DATA),
+	PINMUX_GPIO(GPIO_PTT1, PTT1_DATA),
+	PINMUX_GPIO(GPIO_PTT0, PTT0_DATA),
+
+	/* PTU */
+	PINMUX_GPIO(GPIO_PTU4, PTU4_DATA),
+	PINMUX_GPIO(GPIO_PTU3, PTU3_DATA),
+	PINMUX_GPIO(GPIO_PTU2, PTU2_DATA),
+	PINMUX_GPIO(GPIO_PTU1, PTU1_DATA),
+	PINMUX_GPIO(GPIO_PTU0, PTU0_DATA),
+
+	/* PTV */
+	PINMUX_GPIO(GPIO_PTV4, PTV4_DATA),
+	PINMUX_GPIO(GPIO_PTV3, PTV3_DATA),
+	PINMUX_GPIO(GPIO_PTV2, PTV2_DATA),
+	PINMUX_GPIO(GPIO_PTV1, PTV1_DATA),
+	PINMUX_GPIO(GPIO_PTV0, PTV0_DATA),
+
+	/* PTW */
+	PINMUX_GPIO(GPIO_PTW6, PTW6_DATA),
+	PINMUX_GPIO(GPIO_PTW5, PTW5_DATA),
+	PINMUX_GPIO(GPIO_PTW4, PTW4_DATA),
+	PINMUX_GPIO(GPIO_PTW3, PTW3_DATA),
+	PINMUX_GPIO(GPIO_PTW2, PTW2_DATA),
+	PINMUX_GPIO(GPIO_PTW1, PTW1_DATA),
+	PINMUX_GPIO(GPIO_PTW0, PTW0_DATA),
+
+	/* PTX */
+	PINMUX_GPIO(GPIO_PTX6, PTX6_DATA),
+	PINMUX_GPIO(GPIO_PTX5, PTX5_DATA),
+	PINMUX_GPIO(GPIO_PTX4, PTX4_DATA),
+	PINMUX_GPIO(GPIO_PTX3, PTX3_DATA),
+	PINMUX_GPIO(GPIO_PTX2, PTX2_DATA),
+	PINMUX_GPIO(GPIO_PTX1, PTX1_DATA),
+	PINMUX_GPIO(GPIO_PTX0, PTX0_DATA),
+
+	/* PTY */
+	PINMUX_GPIO(GPIO_PTY5, PTY5_DATA),
+	PINMUX_GPIO(GPIO_PTY4, PTY4_DATA),
+	PINMUX_GPIO(GPIO_PTY3, PTY3_DATA),
+	PINMUX_GPIO(GPIO_PTY2, PTY2_DATA),
+	PINMUX_GPIO(GPIO_PTY1, PTY1_DATA),
+	PINMUX_GPIO(GPIO_PTY0, PTY0_DATA),
+
+	/* PTZ */
+	PINMUX_GPIO(GPIO_PTZ5, PTZ5_DATA),
+	PINMUX_GPIO(GPIO_PTZ4, PTZ4_DATA),
+	PINMUX_GPIO(GPIO_PTZ3, PTZ3_DATA),
+	PINMUX_GPIO(GPIO_PTZ2, PTZ2_DATA),
+	PINMUX_GPIO(GPIO_PTZ1, PTZ1_DATA),
+
+	/* SCIF0 */
+	PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RTS, SCIF0_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_CTS, SCIF0_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK),
+
+	/* SCIF1 */
+	PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_RTS, SCIF1_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_CTS, SCIF1_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_SCK, SCIF1_SCK_MARK),
+
+	/* SCIF2 */
+	PINMUX_GPIO(GPIO_FN_SCIF2_TXD, SCIF2_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_RXD, SCIF2_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_RTS, SCIF2_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_CTS, SCIF2_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_SCK, SCIF2_SCK_MARK),
+
+	/* SIO */
+	PINMUX_GPIO(GPIO_FN_SIOTXD, SIOTXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIORXD, SIORXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOD, SIOD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOSTRB0, SIOSTRB0_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOSTRB1, SIOSTRB1_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOSCK, SIOSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOMCK, SIOMCK_MARK),
+
+	/* CEU */
+	PINMUX_GPIO(GPIO_FN_VIO_D15, VIO_D15_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D14, VIO_D14_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D13, VIO_D13_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D12, VIO_D12_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D11, VIO_D11_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D10, VIO_D10_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D9, VIO_D9_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D8, VIO_D8_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D7, VIO_D7_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D6, VIO_D6_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D5, VIO_D5_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D4, VIO_D4_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D3, VIO_D3_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D2, VIO_D2_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D1, VIO_D1_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D0, VIO_D0_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_CLK, VIO_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_VD, VIO_VD_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_HD, VIO_HD_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_FLD, VIO_FLD_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_CKO, VIO_CKO_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_STEX, VIO_STEX_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_STEM, VIO_STEM_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_VD2, VIO_VD2_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_HD2, VIO_HD2_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_CLK2, VIO_CLK2_MARK),
+
+	/* LCDC */
+	PINMUX_GPIO(GPIO_FN_LCDD23, LCDD23_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD22, LCDD22_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD21, LCDD21_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD20, LCDD20_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD19, LCDD19_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD18, LCDD18_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD17, LCDD17_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD16, LCDD16_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD15, LCDD15_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD14, LCDD14_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD13, LCDD13_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD12, LCDD12_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD11, LCDD11_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD10, LCDD10_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD9, LCDD9_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD8, LCDD8_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD7, LCDD7_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD6, LCDD6_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD5, LCDD5_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD4, LCDD4_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD3, LCDD3_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD2, LCDD2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD1, LCDD1_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD0, LCDD0_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDLCLK, LCDLCLK_MARK),
+	/* Main LCD */
+	PINMUX_GPIO(GPIO_FN_LCDDON, LCDDON_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVCPWC, LCDVCPWC_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVEPWC, LCDVEPWC_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVSYN, LCDVSYN_MARK),
+	/* Main LCD - RGB Mode */
+	PINMUX_GPIO(GPIO_FN_LCDDCK, LCDDCK_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDHSYN, LCDHSYN_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDDISP, LCDDISP_MARK),
+	/* Main LCD - SYS Mode */
+	PINMUX_GPIO(GPIO_FN_LCDRS, LCDRS_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDCS, LCDCS_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDWR, LCDWR_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDRD, LCDRD_MARK),
+	/* Sub LCD - SYS Mode */
+	PINMUX_GPIO(GPIO_FN_LCDDON2, LCDDON2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVCPWC2, LCDVCPWC2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVEPWC2, LCDVEPWC2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVSYN2, LCDVSYN2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDCS2, LCDCS2_MARK),
+
+	/* BSC */
+	PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK),
+	PINMUX_GPIO(GPIO_FN_A25, A25_MARK),
+	PINMUX_GPIO(GPIO_FN_A24, A24_MARK),
+	PINMUX_GPIO(GPIO_FN_A23, A23_MARK),
+	PINMUX_GPIO(GPIO_FN_A22, A22_MARK),
+	PINMUX_GPIO(GPIO_FN_BS, BS_MARK),
+	PINMUX_GPIO(GPIO_FN_CS6B_CE1B, CS6B_CE1B_MARK),
+	PINMUX_GPIO(GPIO_FN_WAIT, WAIT_MARK),
+	PINMUX_GPIO(GPIO_FN_CS6A_CE2B, CS6A_CE2B_MARK),
+
+	/* SBSC */
+	PINMUX_GPIO(GPIO_FN_HPD63, HPD63_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD62, HPD62_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD61, HPD61_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD60, HPD60_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD59, HPD59_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD58, HPD58_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD57, HPD57_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD56, HPD56_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD55, HPD55_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD54, HPD54_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD53, HPD53_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD52, HPD52_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD51, HPD51_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD50, HPD50_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD49, HPD49_MARK),
+	PINMUX_GPIO(GPIO_FN_HPD48, HPD48_MARK),
+	PINMUX_GPIO(GPIO_FN_HPDQM7, HPDQM7_MARK),
+	PINMUX_GPIO(GPIO_FN_HPDQM6, HPDQM6_MARK),
+	PINMUX_GPIO(GPIO_FN_HPDQM5, HPDQM5_MARK),
+	PINMUX_GPIO(GPIO_FN_HPDQM4, HPDQM4_MARK),
+
+	/* IRQ */
+	PINMUX_GPIO(GPIO_FN_IRQ0, IRQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ1, IRQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ2, IRQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ3, IRQ3_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ4, IRQ4_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ5, IRQ5_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ6, IRQ6_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ7, IRQ7_MARK),
+
+	/* SDHI */
+	PINMUX_GPIO(GPIO_FN_SDHICD, SDHICD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHIWP, SDHIWP_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHID3, SDHID3_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHID2, SDHID2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHID1, SDHID1_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHID0, SDHID0_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHICMD, SDHICMD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHICLK, SDHICLK_MARK),
+
+	/* SIU - Port A */
+	PINMUX_GPIO(GPIO_FN_SIUAOLR, SIUAOLR_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAOBT, SIUAOBT_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAISLD, SIUAISLD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAILR, SIUAILR_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAIBT, SIUAIBT_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAOSLD, SIUAOSLD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUMCKA, SIUMCKA_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUFCKA, SIUFCKA_MARK),
+
+	/* SIU - Port B */
+	PINMUX_GPIO(GPIO_FN_SIUBOLR, SIUBOLR_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBOBT, SIUBOBT_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBISLD, SIUBISLD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBILR, SIUBILR_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBIBT, SIUBIBT_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBOSLD, SIUBOSLD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUMCKB, SIUMCKB_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUFCKB, SIUFCKB_MARK),
+
+	/* AUD */
+	PINMUX_GPIO(GPIO_FN_AUDSYNC, AUDSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA3, AUDATA3_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA2, AUDATA2_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA1, AUDATA1_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA0, AUDATA0_MARK),
+
+	/* DMAC */
+	PINMUX_GPIO(GPIO_FN_DACK, DACK_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK),
+
+	/* VOU */
+	PINMUX_GPIO(GPIO_FN_DV_CLKI, DV_CLKI_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_CLK, DV_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_HSYNC, DV_HSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_VSYNC, DV_VSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D15, DV_D15_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D14, DV_D14_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D13, DV_D13_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D12, DV_D12_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D11, DV_D11_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D10, DV_D10_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D9, DV_D9_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D8, DV_D8_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D7, DV_D7_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D6, DV_D6_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D5, DV_D5_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D4, DV_D4_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D3, DV_D3_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D2, DV_D2_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D1, DV_D1_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D0, DV_D0_MARK),
+
+	/* CPG */
+	PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK),
+	PINMUX_GPIO(GPIO_FN_PDSTATUS, PDSTATUS_MARK),
+
+	/* SIOF0 */
+	PINMUX_GPIO(GPIO_FN_SIOF0_MCK, SIOF0_MCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF0_SCK, SIOF0_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF0_SYNC, SIOF0_SYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF0_SS1, SIOF0_SS1_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF0_SS2, SIOF0_SS2_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF0_TXD, SIOF0_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF0_RXD, SIOF0_RXD_MARK),
+
+	/* SIOF1 */
+	PINMUX_GPIO(GPIO_FN_SIOF1_MCK, SIOF1_MCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF1_SCK, SIOF1_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF1_SYNC, SIOF1_SYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF1_SS1, SIOF1_SS1_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF1_SS2, SIOF1_SS2_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF1_TXD, SIOF1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF1_RXD, SIOF1_RXD_MARK),
+
+	/* SIM */
+	PINMUX_GPIO(GPIO_FN_SIM_D, SIM_D_MARK),
+	PINMUX_GPIO(GPIO_FN_SIM_CLK, SIM_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIM_RST, SIM_RST_MARK),
+
+	/* TSIF */
+	PINMUX_GPIO(GPIO_FN_TS_SDAT, TS_SDAT_MARK),
+	PINMUX_GPIO(GPIO_FN_TS_SCK, TS_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_TS_SDEN, TS_SDEN_MARK),
+	PINMUX_GPIO(GPIO_FN_TS_SPSYNC, TS_SPSYNC_MARK),
+
+	/* IRDA */
+	PINMUX_GPIO(GPIO_FN_IRDA_IN, IRDA_IN_MARK),
+	PINMUX_GPIO(GPIO_FN_IRDA_OUT, IRDA_OUT_MARK),
+
+	/* TPU */
+	PINMUX_GPIO(GPIO_FN_TPUTO, TPUTO_MARK),
+
+	/* FLCTL */
+	PINMUX_GPIO(GPIO_FN_FCE, FCE_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF7, NAF7_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF6, NAF6_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF5, NAF5_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF4, NAF4_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF3, NAF3_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF2, NAF2_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF1, NAF1_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF0, NAF0_MARK),
+	PINMUX_GPIO(GPIO_FN_FCDE, FCDE_MARK),
+	PINMUX_GPIO(GPIO_FN_FOE, FOE_MARK),
+	PINMUX_GPIO(GPIO_FN_FSC, FSC_MARK),
+	PINMUX_GPIO(GPIO_FN_FWE, FWE_MARK),
+	PINMUX_GPIO(GPIO_FN_FRB, FRB_MARK),
+
+	/* KEYSC */
+	PINMUX_GPIO(GPIO_FN_KEYIN0, KEYIN0_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN1, KEYIN1_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN2, KEYIN2_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN3, KEYIN3_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN4, KEYIN4_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT0, KEYOUT0_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT1, KEYOUT1_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT2, KEYOUT2_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT3, KEYOUT3_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT4_IN6, KEYOUT4_IN6_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT5_IN5, KEYOUT5_IN5_MARK),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2) {
+		VIO_D7_SCIF1_SCK, PTA7_OUT, PTA7_IN_PD, PTA7_IN,
+		VIO_D6_SCIF1_RXD, 0, PTA6_IN_PD, PTA6_IN,
+		VIO_D5_SCIF1_TXD, PTA5_OUT, PTA5_IN_PD, PTA5_IN,
+		VIO_D4, 0, PTA4_IN_PD, PTA4_IN,
+		VIO_D3, 0, PTA3_IN_PD, PTA3_IN,
+		VIO_D2, 0, PTA2_IN_PD, PTA2_IN,
+		VIO_D1, 0, PTA1_IN_PD, PTA1_IN,
+		VIO_D0_LCDLCLK, 0, PTA0_IN_PD, PTA0_IN }
+	},
+	{ PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2) {
+		HPD55, PTB7_OUT, 0, PTB7_IN,
+		HPD54, PTB6_OUT, 0, PTB6_IN,
+		HPD53, PTB5_OUT, 0, PTB5_IN,
+		HPD52, PTB4_OUT, 0, PTB4_IN,
+		HPD51, PTB3_OUT, 0, PTB3_IN,
+		HPD50, PTB2_OUT, 0, PTB2_IN,
+		HPD49, PTB1_OUT, 0, PTB1_IN,
+		HPD48, PTB0_OUT, 0, PTB0_IN }
+	},
+	{ PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2) {
+		0, 0, PTC7_IN_PU, PTC7_IN,
+		0, 0, 0, 0,
+		IOIS16, 0, PTC5_IN_PU, PTC5_IN,
+		HPDQM7, PTC4_OUT, 0, PTC4_IN,
+		HPDQM6, PTC3_OUT, 0, PTC3_IN,
+		HPDQM5, PTC2_OUT, 0, PTC2_IN,
+		0, 0, 0, 0,
+		HPDQM4, PTC0_OUT, 0, PTC0_IN }
+	},
+	{ PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2) {
+		SDHICD, 0, PTD7_IN_PU, PTD7_IN,
+		SDHIWP, PTD6_OUT, PTD6_IN_PU, PTD6_IN,
+		SDHID3, PTD5_OUT, PTD5_IN_PU, PTD5_IN,
+		IRQ2_SDHID2, PTD4_OUT, PTD4_IN_PU, PTD4_IN,
+		SDHID1, PTD3_OUT, PTD3_IN_PU, PTD3_IN,
+		SDHID0, PTD2_OUT, PTD2_IN_PU, PTD2_IN,
+		SDHICMD, PTD1_OUT, PTD1_IN_PU, PTD1_IN,
+		SDHICLK, PTD0_OUT, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2) {
+		A25, PTE7_OUT, PTE7_IN_PD, PTE7_IN,
+		A24, PTE6_OUT, PTE6_IN_PD, PTE6_IN,
+		A23, PTE5_OUT, PTE5_IN_PD, PTE5_IN,
+		A22, PTE4_OUT, PTE4_IN_PD, PTE4_IN,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		IRQ5, PTE1_OUT, PTE1_IN_PD, PTE1_IN,
+		IRQ4_BS, PTE0_OUT, PTE0_IN_PD, PTE0_IN }
+	},
+	{ PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2) {
+		0, 0, 0, 0,
+		PTF6, PTF6_OUT, PTF6_IN_PD, PTF6_IN,
+		SIOSCK_SIUBOBT, PTF5_OUT, PTF5_IN_PD, PTF5_IN,
+		SIOSTRB1_SIUBOLR, PTF4_OUT, PTF4_IN_PD, PTF4_IN,
+		SIOSTRB0_SIUBIBT, PTF3_OUT, PTF3_IN_PD, PTF3_IN,
+		SIOD_SIUBILR, PTF2_OUT, PTF2_IN_PD, PTF2_IN,
+		SIORXD_SIUBISLD, 0, PTF1_IN_PD, PTF1_IN,
+		SIOTXD_SIUBOSLD, PTF0_OUT, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PGCR", 0xa405010c, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		AUDSYNC, PTG4_OUT, 0, 0,
+		AUDATA3, PTG3_OUT, 0, 0,
+		AUDATA2, PTG2_OUT, 0, 0,
+		AUDATA1, PTG1_OUT, 0, 0,
+		AUDATA0, PTG0_OUT, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2) {
+		LCDVCPWC_LCDVCPWC2, PTH7_OUT, 0, 0,
+		LCDVSYN2_DACK, PTH6_OUT, PTH6_IN_PD, PTH6_IN,
+		LCDVSYN, PTH5_OUT, PTH5_IN_PD, PTH5_IN,
+		LCDDISP_LCDRS, PTH4_OUT, 0, 0,
+		LCDHSYN_LCDCS, PTH3_OUT, 0, 0,
+		LCDDON_LCDDON2, PTH2_OUT, 0, 0,
+		LCDD17_DV_HSYNC, PTH1_OUT, PTH1_IN_PD, PTH1_IN,
+		LCDD16_DV_VSYNC, PTH0_OUT, PTH0_IN_PD, PTH0_IN }
+	},
+	{ PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2) {
+		STATUS0, PTJ7_OUT, 0, 0,
+		0, PTJ6_OUT, 0, 0,
+		PDSTATUS, PTJ5_OUT, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		IRQ1, PTJ1_OUT, PTJ1_IN_PU, PTJ1_IN,
+		IRQ0, PTJ0_OUT, PTJ0_IN_PU, PTJ0_IN }
+	},
+	{ PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2) {
+		0, 0, 0, 0,
+		SIUAILR_SIOF1_SS2, PTK6_OUT, PTK6_IN_PD, PTK6_IN,
+		SIUAIBT_SIOF1_SS1, PTK5_OUT, PTK5_IN_PD, PTK5_IN,
+		SIUAOLR_SIOF1_SYNC, PTK4_OUT, PTK4_IN_PD, PTK4_IN,
+		SIUAOBT_SIOF1_SCK, PTK3_OUT, PTK3_IN_PD, PTK3_IN,
+		SIUAISLD_SIOF1_RXD, 0, PTK2_IN_PD, PTK2_IN,
+		SIUAOSLD_SIOF1_TXD, PTK1_OUT, 0, 0,
+		PTK0, PTK0_OUT, PTK0_IN_PD, PTK0_IN }
+	},
+	{ PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2) {
+		LCDD15_DV_D15, PTL7_OUT, PTL7_IN_PD, PTL7_IN,
+		LCDD14_DV_D14, PTL6_OUT, PTL6_IN_PD, PTL6_IN,
+		LCDD13_DV_D13, PTL5_OUT, PTL5_IN_PD, PTL5_IN,
+		LCDD12_DV_D12, PTL4_OUT, PTL4_IN_PD, PTL4_IN,
+		LCDD11_DV_D11, PTL3_OUT, PTL3_IN_PD, PTL3_IN,
+		LCDD10_DV_D10, PTL2_OUT, PTL2_IN_PD, PTL2_IN,
+		LCDD9_DV_D9, PTL1_OUT, PTL1_IN_PD, PTL1_IN,
+		LCDD8_DV_D8, PTL0_OUT, PTL0_IN_PD, PTL0_IN }
+	},
+	{ PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2) {
+		LCDD7_DV_D7, PTM7_OUT, PTM7_IN_PD, PTM7_IN,
+		LCDD6_DV_D6, PTM6_OUT, PTM6_IN_PD, PTM6_IN,
+		LCDD5_DV_D5, PTM5_OUT, PTM5_IN_PD, PTM5_IN,
+		LCDD4_DV_D4, PTM4_OUT, PTM4_IN_PD, PTM4_IN,
+		LCDD3_DV_D3, PTM3_OUT, PTM3_IN_PD, PTM3_IN,
+		LCDD2_DV_D2, PTM2_OUT, PTM2_IN_PD, PTM2_IN,
+		LCDD1_DV_D1, PTM1_OUT, PTM1_IN_PD, PTM1_IN,
+		LCDD0_DV_D0, PTM0_OUT, PTM0_IN_PD, PTM0_IN }
+	},
+	{ PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2) {
+		HPD63, PTN7_OUT, 0, PTN7_IN,
+		HPD62, PTN6_OUT, 0, PTN6_IN,
+		HPD61, PTN5_OUT, 0, PTN5_IN,
+		HPD60, PTN4_OUT, 0, PTN4_IN,
+		HPD59, PTN3_OUT, 0, PTN3_IN,
+		HPD58, PTN2_OUT, 0, PTN2_IN,
+		HPD57, PTN1_OUT, 0, PTN1_IN,
+		HPD56, PTN0_OUT, 0, PTN0_IN }
+	},
+	{ PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2) {
+		0, 0, 0, 0,
+		SIOF0_SS2_SIM_RST, PTQ6_OUT, 0, 0,
+		SIOF0_SS1_TS_SPSYNC, PTQ5_OUT, PTQ5_IN_PD, PTQ5_IN,
+		SIOF0_SYNC_TS_SDEN, PTQ4_OUT, PTQ4_IN_PD, PTQ4_IN,
+		SIOF0_SCK_TS_SCK, PTQ3_OUT, PTQ3_IN_PD, PTQ3_IN,
+		PTQ2, 0, PTQ2_IN_PD, PTQ2_IN,
+		PTQ1, PTQ1_OUT, 0, 0,
+		PTQ0, PTQ0_OUT, PTQ0_IN_PU, PTQ0_IN }
+	},
+	{ PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		LCDRD, PTR4_OUT, 0, 0,
+		CS6B_CE1B_LCDCS2, PTR3_OUT, 0, 0,
+		WAIT, 0, PTR2_IN_PU, PTR2_IN,
+		LCDDCK_LCDWR, PTR1_OUT, 0, 0,
+		LCDVEPWC_LCDVEPWC2, PTR0_OUT, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		SCIF0_CTS_SIUAISPD, 0, PTS4_IN_PD, PTS4_IN,
+		SCIF0_RTS_SIUAOSPD, PTS3_OUT, 0, 0,
+		SCIF0_SCK_TPUTO, PTS2_OUT, PTS2_IN_PD, PTS2_IN,
+		SCIF0_RXD, 0, PTS1_IN_PD, PTS1_IN,
+		SCIF0_TXD, PTS0_OUT, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PTCR", 0xa4050140, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		FOE_VIO_VD2, PTT4_OUT, PTT4_IN_PD, PTT4_IN,
+		FWE, PTT3_OUT, PTT3_IN_PD, PTT3_IN,
+		FSC, PTT2_OUT, PTT2_IN_PD, PTT2_IN,
+		DREQ0, 0, PTT1_IN_PD, PTT1_IN,
+		FCDE, PTT0_OUT, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PUCR", 0xa4050142, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		NAF2_VIO_D10, PTU4_OUT, PTU4_IN_PD, PTU4_IN,
+		NAF1_VIO_D9, PTU3_OUT, PTU3_IN_PD, PTU3_IN,
+		NAF0_VIO_D8, PTU2_OUT, PTU2_IN_PD, PTU2_IN,
+		FRB_VIO_CLK2, 0, PTU1_IN_PD, PTU1_IN,
+		FCE_VIO_HD2, PTU0_OUT, PTU0_IN_PD, PTU0_IN }
+	},
+	{ PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		NAF7_VIO_D15, PTV4_OUT, PTV4_IN_PD, PTV4_IN,
+		NAF6_VIO_D14, PTV3_OUT, PTV3_IN_PD, PTV3_IN,
+		NAF5_VIO_D13, PTV2_OUT, PTV2_IN_PD, PTV2_IN,
+		NAF4_VIO_D12, PTV1_OUT, PTV1_IN_PD, PTV1_IN,
+		NAF3_VIO_D11, PTV0_OUT, PTV0_IN_PD, PTV0_IN }
+	},
+	{ PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2) {
+		0, 0, 0, 0,
+		VIO_FLD_SCIF2_CTS, 0, PTW6_IN_PD, PTW6_IN,
+		VIO_CKO_SCIF2_RTS, PTW5_OUT, 0, 0,
+		VIO_STEX_SCIF2_SCK, PTW4_OUT, PTW4_IN_PD, PTW4_IN,
+		VIO_STEM_SCIF2_TXD, PTW3_OUT, PTW3_IN_PD, PTW3_IN,
+		VIO_HD_SCIF2_RXD, PTW2_OUT, PTW2_IN_PD, PTW2_IN,
+		VIO_VD_SCIF1_CTS, PTW1_OUT, PTW1_IN_PD, PTW1_IN,
+		VIO_CLK_SCIF1_RTS, PTW0_OUT, PTW0_IN_PD, PTW0_IN }
+	},
+	{ PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2) {
+		0, 0, 0, 0,
+		CS6A_CE2B, PTX6_OUT, PTX6_IN_PU, PTX6_IN,
+		LCDD23, PTX5_OUT, PTX5_IN_PD, PTX5_IN,
+		LCDD22, PTX4_OUT, PTX4_IN_PD, PTX4_IN,
+		LCDD21, PTX3_OUT, PTX3_IN_PD, PTX3_IN,
+		LCDD20, PTX2_OUT, PTX2_IN_PD, PTX2_IN,
+		LCDD19_DV_CLKI, PTX1_OUT, PTX1_IN_PD, PTX1_IN,
+		LCDD18_DV_CLK, PTX0_OUT, PTX0_IN_PD, PTX0_IN }
+	},
+	{ PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		KEYOUT5_IN5, PTY5_OUT, PTY5_IN_PU, PTY5_IN,
+		KEYOUT4_IN6, PTY4_OUT, PTY4_IN_PU, PTY4_IN,
+		KEYOUT3, PTY3_OUT, PTY3_IN_PU, PTY3_IN,
+		KEYOUT2, PTY2_OUT, PTY2_IN_PU, PTY2_IN,
+		KEYOUT1, PTY1_OUT, 0, 0,
+		KEYOUT0, PTY0_OUT, PTY0_IN_PU, PTY0_IN }
+	},
+	{ PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		KEYIN4_IRQ7, 0, PTZ5_IN_PU, PTZ5_IN,
+		KEYIN3, 0, PTZ4_IN_PU, PTZ4_IN,
+		KEYIN2, 0, PTZ3_IN_PU, PTZ3_IN,
+		KEYIN1, 0, PTZ2_IN_PU, PTZ2_IN,
+		KEYIN0_IRQ6, 0, PTZ1_IN_PU, PTZ1_IN,
+		0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PSELA", 0xa405014e, 16, 1) {
+		PSA15_KEYIN0, PSA15_IRQ6,
+		PSA14_KEYIN4, PSA14_IRQ7,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PSA9_IRQ4, PSA9_BS,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PSA4_IRQ2, PSA4_SDHID2,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0 }
+	},
+	{ PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1) {
+		PSB15_SIOTXD, PSB15_SIUBOSLD,
+		PSB14_SIORXD, PSB14_SIUBISLD,
+		PSB13_SIOD, PSB13_SIUBILR,
+		PSB12_SIOSTRB0, PSB12_SIUBIBT,
+		PSB11_SIOSTRB1, PSB11_SIUBOLR,
+		PSB10_SIOSCK, PSB10_SIUBOBT,
+		PSB9_SIOMCK, PSB9_SIUMCKB,
+		PSB8_SIOF0_MCK, PSB8_IRQ3,
+		PSB7_SIOF0_TXD, PSB7_IRDA_OUT,
+		PSB6_SIOF0_RXD, PSB6_IRDA_IN,
+		PSB5_SIOF0_SCK, PSB5_TS_SCK,
+		PSB4_SIOF0_SYNC, PSB4_TS_SDEN,
+		PSB3_SIOF0_SS1, PSB3_TS_SPSYNC,
+		PSB2_SIOF0_SS2, PSB2_SIM_RST,
+		PSB1_SIUMCKA, PSB1_SIOF1_MCK,
+		PSB0_SIUAOSLD, PSB0_SIOF1_TXD }
+	},
+	{ PINMUX_CFG_REG("PSELC", 0xa4050152, 16, 1) {
+		PSC15_SIUAISLD, PSC15_SIOF1_RXD,
+		PSC14_SIUAOBT, PSC14_SIOF1_SCK,
+		PSC13_SIUAOLR, PSC13_SIOF1_SYNC,
+		PSC12_SIUAIBT, PSC12_SIOF1_SS1,
+		PSC11_SIUAILR, PSC11_SIOF1_SS2,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PSC0_NAF, PSC0_VIO }
+	},
+	{ PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1) {
+		0, 0,
+		0, 0,
+		PSD13_VIO, PSD13_SCIF2,
+		PSD12_VIO, PSD12_SCIF1,
+		PSD11_VIO, PSD11_SCIF1,
+		PSD10_VIO_D0, PSD10_LCDLCLK,
+		PSD9_SIOMCK_SIUMCKB, PSD9_SIUFCKB,
+		PSD8_SCIF0_SCK, PSD8_TPUTO,
+		PSD7_SCIF0_RTS, PSD7_SIUAOSPD,
+		PSD6_SCIF0_CTS, PSD6_SIUAISPD,
+		PSD5_CS6B_CE1B, PSD5_LCDCS2,
+		0, 0,
+		PSD3_LCDVEPWC_LCDVCPWC, PSD3_LCDVEPWC2_LCDVCPWC2,
+		PSD2_LCDDON, PSD2_LCDDON2,
+		0, 0,
+		PSD0_LCDD19_LCDD0, PSD0_DV }
+	},
+	{ PINMUX_CFG_REG("PSELE", 0xa4050156, 16, 1) {
+		PSE15_SIOF0_MCK_IRQ3, PSE15_SIM_D,
+		PSE14_SIOF0_TXD_IRDA_OUT, PSE14_SIM_CLK,
+		PSE13_SIOF0_RXD_IRDA_IN, PSE13_TS_SDAT,
+		PSE12_LCDVSYN2, PSE12_DACK,
+		PSE11_SIUMCKA_SIOF1_MCK, PSE11_SIUFCKA,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PSE3_FLCTL, PSE3_VIO,
+		PSE2_NAF2, PSE2_VIO_D10,
+		PSE1_NAF1, PSE1_VIO_D9,
+		PSE0_NAF0, PSE0_VIO_D8 }
+	},
+	{ PINMUX_CFG_REG("HIZCRA", 0xa4050158, 16, 1) {
+		0, 0,
+		HIZA14_KEYSC, HIZA14_HIZ,
+		0, 0,
+		0, 0,
+		0, 0,
+		HIZA10_NAF, HIZA10_HIZ,
+		HIZA9_VIO, HIZA9_HIZ,
+		HIZA8_LCDC, HIZA8_HIZ,
+		HIZA7_LCDC, HIZA7_HIZ,
+		HIZA6_LCDC, HIZA6_HIZ,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0 }
+	},
+	{ PINMUX_CFG_REG("HIZCRB", 0xa405015a, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		HIZB1_VIO, HIZB1_HIZ,
+		HIZB0_VIO, HIZB0_HIZ }
+	},
+	{ PINMUX_CFG_REG("HIZCRC", 0xa405015c, 16, 1) {
+		HIZC15_IRQ7, HIZC15_HIZ,
+		HIZC14_IRQ6, HIZC14_HIZ,
+		HIZC13_IRQ5, HIZC13_HIZ,
+		HIZC12_IRQ4, HIZC12_HIZ,
+		HIZC11_IRQ3, HIZC11_HIZ,
+		HIZC10_IRQ2, HIZC10_HIZ,
+		HIZC9_IRQ1, HIZC9_HIZ,
+		HIZC8_IRQ0, HIZC8_HIZ,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0 }
+	},
+	{ PINMUX_CFG_REG("MSELCRB", 0xa4050182, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		MSELB9_VIO, MSELB9_VIO2,
+		MSELB8_RGB, MSELB8_SYS,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0 }
+	},
+	{}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PADR", 0xa4050120, 8) {
+		PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+		PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA }
+	},
+	{ PINMUX_DATA_REG("PBDR", 0xa4050122, 8) {
+		PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+		PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA }
+	},
+	{ PINMUX_DATA_REG("PCDR", 0xa4050124, 8) {
+		PTC7_DATA, 0, PTC5_DATA, PTC4_DATA,
+		PTC3_DATA, PTC2_DATA, 0, PTC0_DATA }
+	},
+	{ PINMUX_DATA_REG("PDDR", 0xa4050126, 8) {
+		PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+		PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA }
+	},
+	{ PINMUX_DATA_REG("PEDR", 0xa4050128, 8) {
+		PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+		0, 0, PTE1_DATA, PTE0_DATA }
+	},
+	{ PINMUX_DATA_REG("PFDR", 0xa405012a, 8) {
+		0, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+		PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA }
+	},
+	{ PINMUX_DATA_REG("PGDR", 0xa405012c, 8) {
+		0, 0, 0, PTG4_DATA,
+		PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA }
+	},
+	{ PINMUX_DATA_REG("PHDR", 0xa405012e, 8) {
+		PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+		PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA }
+	},
+	{ PINMUX_DATA_REG("PJDR", 0xa4050130, 8) {
+		PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0,
+		0, 0, PTJ1_DATA, PTJ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PKDR", 0xa4050132, 8) {
+		0, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+		PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA }
+	},
+	{ PINMUX_DATA_REG("PLDR", 0xa4050134, 8) {
+		PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+		PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA }
+	},
+	{ PINMUX_DATA_REG("PMDR", 0xa4050136, 8) {
+		PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+		PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA }
+	},
+	{ PINMUX_DATA_REG("PNDR", 0xa4050138, 8) {
+		PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+		PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA }
+	},
+	{ PINMUX_DATA_REG("PQDR", 0xa405013a, 8) {
+		0, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+		PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PRDR", 0xa405013c, 8) {
+		0, 0, 0, PTR4_DATA,
+		PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA }
+	},
+	{ PINMUX_DATA_REG("PSDR", 0xa405013e, 8) {
+		0, 0, 0, PTS4_DATA,
+		PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA }
+	},
+	{ PINMUX_DATA_REG("PTDR", 0xa4050160, 8) {
+		0, 0, 0, PTT4_DATA,
+		PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PUDR", 0xa4050162, 8) {
+		0, 0, 0, PTU4_DATA,
+		PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA }
+	},
+	{ PINMUX_DATA_REG("PVDR", 0xa4050164, 8) {
+		0, 0, 0, PTV4_DATA,
+		PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA }
+	},
+	{ PINMUX_DATA_REG("PWDR", 0xa4050166, 8) {
+		0, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+		PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA }
+	},
+	{ PINMUX_DATA_REG("PXDR", 0xa4050168, 8) {
+		0, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+		PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA }
+	},
+	{ PINMUX_DATA_REG("PYDR", 0xa405016a, 8) {
+		0, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+		PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA }
+	},
+	{ PINMUX_DATA_REG("PZDR", 0xa405016c, 8) {
+		0, 0, PTZ5_DATA, PTZ4_DATA,
+		PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7722_pinmux_info = {
+	.name = "sh7722_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PTA7,
+	.last_gpio = GPIO_FN_KEYOUT5_IN5,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return register_pinmux(&sh7722_pinmux_info);
+}
+
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
new file mode 100644
index 0000000..88bf5ec
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
@@ -0,0 +1,1909 @@
+/*
+ * SH7723 Pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7723.h>
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+	PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
+	PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+	PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
+	PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+	PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
+	PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+	PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
+	PTE5_DATA, PTE4_DATA, PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
+	PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+	PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
+	PTG5_DATA, PTG4_DATA, PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
+	PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+	PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
+	PTJ7_DATA, PTJ5_DATA, PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
+	PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+	PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
+	PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+	PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
+	PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+	PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
+	PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+	PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
+	PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
+	PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+	PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
+	PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
+	PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
+	PTT5_DATA, PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
+	PTU5_DATA, PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
+	PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+	PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
+	PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+	PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
+	PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+	PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
+	PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+	PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
+	PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+	PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
+	PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
+	PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
+	PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
+	PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
+	PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
+	PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
+	PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
+	PTE5_IN, PTE4_IN, PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
+	PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
+	PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
+	PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
+	PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
+	PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
+	PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
+	PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
+	PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
+	PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
+	PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
+	PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
+	PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
+	PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
+	PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
+	PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
+	PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
+	PTS7_IN, PTS6_IN, PTS5_IN, PTS4_IN,
+	PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
+	PTT5_IN, PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
+	PTU5_IN, PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
+	PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
+	PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
+	PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
+	PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
+	PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
+	PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
+	PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
+	PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
+	PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
+	PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PTA4_IN_PU, PTA3_IN_PU, PTA2_IN_PU, PTA1_IN_PU, PTA0_IN_PU,
+	PTB2_IN_PU, PTB1_IN_PU,
+	PTR2_IN_PU,
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
+	PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
+	PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
+	PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
+	PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
+	PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
+	PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
+	PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
+	PTE5_OUT, PTE4_OUT, PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
+	PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
+	PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
+	PTG5_OUT, PTG4_OUT, PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
+	PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
+	PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
+	PTJ7_OUT, PTJ5_OUT, PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
+	PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
+	PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
+	PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
+	PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
+	PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
+	PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
+	PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
+	PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
+	PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
+	PTR1_OUT, PTR0_OUT,
+	PTS7_OUT, PTS6_OUT, PTS5_OUT, PTS4_OUT,
+	PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
+	PTT5_OUT, PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
+	PTU5_OUT, PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
+	PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
+	PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
+	PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
+	PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
+	PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
+	PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
+	PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
+	PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
+	PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
+	PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
+	PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
+	PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
+	PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
+	PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
+	PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
+	PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
+	PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
+	PTE5_FN, PTE4_FN, PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
+	PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
+	PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
+	PTG5_FN, PTG4_FN, PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
+	PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
+	PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
+	PTJ7_FN, PTJ5_FN, PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
+	PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
+	PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
+	PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
+	PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
+	PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
+	PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
+	PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
+	PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
+	PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
+	PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
+	PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
+	PTS7_FN, PTS6_FN, PTS5_FN, PTS4_FN,
+	PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
+	PTT5_FN, PTT4_FN, PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
+	PTU5_FN, PTU4_FN, PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
+	PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
+	PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
+	PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
+	PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
+	PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
+	PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
+	PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
+	PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
+	PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
+	PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
+
+
+	PSA15_PSA14_FN1, PSA15_PSA14_FN2,
+	PSA13_PSA12_FN1, PSA13_PSA12_FN2,
+	PSA11_PSA10_FN1, PSA11_PSA10_FN2,
+	PSA5_PSA4_FN1, PSA5_PSA4_FN2, PSA5_PSA4_FN3,
+	PSA3_PSA2_FN1, PSA3_PSA2_FN2,
+	PSB15_PSB14_FN1, PSB15_PSB14_FN2,
+	PSB13_PSB12_LCDC_RGB, PSB13_PSB12_LCDC_SYS,
+	PSB9_PSB8_FN1, PSB9_PSB8_FN2, PSB9_PSB8_FN3,
+	PSB7_PSB6_FN1, PSB7_PSB6_FN2,
+	PSB5_PSB4_FN1, PSB5_PSB4_FN2,
+	PSB3_PSB2_FN1, PSB3_PSB2_FN2,
+	PSC15_PSC14_FN1, PSC15_PSC14_FN2,
+	PSC13_PSC12_FN1, PSC13_PSC12_FN2,
+	PSC11_PSC10_FN1, PSC11_PSC10_FN2, PSC11_PSC10_FN3,
+	PSC9_PSC8_FN1, PSC9_PSC8_FN2,
+	PSC7_PSC6_FN1, PSC7_PSC6_FN2, PSC7_PSC6_FN3,
+	PSD15_PSD14_FN1, PSD15_PSD14_FN2,
+	PSD13_PSD12_FN1, PSD13_PSD12_FN2,
+	PSD11_PSD10_FN1, PSD11_PSD10_FN2, PSD11_PSD10_FN3,
+	PSD9_PSD8_FN1, PSD9_PSD8_FN2,
+	PSD7_PSD6_FN1, PSD7_PSD6_FN2,
+	PSD5_PSD4_FN1, PSD5_PSD4_FN2,
+	PSD3_PSD2_FN1, PSD3_PSD2_FN2,
+	PSD1_PSD0_FN1, PSD1_PSD0_FN2,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	SCIF0_PTT_TXD_MARK, SCIF0_PTT_RXD_MARK,
+	SCIF0_PTT_SCK_MARK, SCIF0_PTU_TXD_MARK,
+	SCIF0_PTU_RXD_MARK, SCIF0_PTU_SCK_MARK,
+
+	SCIF1_PTS_TXD_MARK, SCIF1_PTS_RXD_MARK,
+	SCIF1_PTS_SCK_MARK, SCIF1_PTV_TXD_MARK,
+	SCIF1_PTV_RXD_MARK, SCIF1_PTV_SCK_MARK,
+
+	SCIF2_PTT_TXD_MARK, SCIF2_PTT_RXD_MARK,
+	SCIF2_PTT_SCK_MARK, SCIF2_PTU_TXD_MARK,
+	SCIF2_PTU_RXD_MARK, SCIF2_PTU_SCK_MARK,
+
+	SCIF3_PTS_TXD_MARK, SCIF3_PTS_RXD_MARK,
+	SCIF3_PTS_SCK_MARK, SCIF3_PTS_RTS_MARK,
+	SCIF3_PTS_CTS_MARK, SCIF3_PTV_TXD_MARK,
+	SCIF3_PTV_RXD_MARK, SCIF3_PTV_SCK_MARK,
+	SCIF3_PTV_RTS_MARK, SCIF3_PTV_CTS_MARK,
+
+	SCIF4_PTE_TXD_MARK, SCIF4_PTE_RXD_MARK,
+	SCIF4_PTE_SCK_MARK, SCIF4_PTN_TXD_MARK,
+	SCIF4_PTN_RXD_MARK, SCIF4_PTN_SCK_MARK,
+
+	SCIF5_PTE_TXD_MARK, SCIF5_PTE_RXD_MARK,
+	SCIF5_PTE_SCK_MARK, SCIF5_PTN_TXD_MARK,
+	SCIF5_PTN_RXD_MARK, SCIF5_PTN_SCK_MARK,
+
+	VIO_D15_MARK, VIO_D14_MARK, VIO_D13_MARK, VIO_D12_MARK,
+	VIO_D11_MARK, VIO_D10_MARK, VIO_D9_MARK, VIO_D8_MARK,
+	VIO_D7_MARK, VIO_D6_MARK, VIO_D5_MARK, VIO_D4_MARK,
+	VIO_D3_MARK, VIO_D2_MARK, VIO_D1_MARK, VIO_D0_MARK,
+	VIO_FLD_MARK, VIO_CKO_MARK,
+	VIO_VD1_MARK, VIO_HD1_MARK, VIO_CLK1_MARK,
+	VIO_HD2_MARK, VIO_VD2_MARK, VIO_CLK2_MARK,
+
+	LCDD23_MARK, LCDD22_MARK, LCDD21_MARK, LCDD20_MARK,
+	LCDD19_MARK, LCDD18_MARK, LCDD17_MARK, LCDD16_MARK,
+	LCDD15_MARK, LCDD14_MARK, LCDD13_MARK, LCDD12_MARK,
+	LCDD11_MARK, LCDD10_MARK, LCDD9_MARK, LCDD8_MARK,
+	LCDD7_MARK, LCDD6_MARK, LCDD5_MARK, LCDD4_MARK,
+	LCDD3_MARK, LCDD2_MARK, LCDD1_MARK, LCDD0_MARK,
+	LCDDON_MARK, LCDVCPWC_MARK, LCDVEPWC_MARK,
+	LCDVSYN_MARK, LCDDCK_MARK, LCDHSYN_MARK, LCDDISP_MARK,
+	LCDRS_MARK, LCDCS_MARK, LCDWR_MARK, LCDRD_MARK,
+	LCDLCLK_PTR_MARK, LCDLCLK_PTW_MARK,
+
+	IRQ0_MARK, IRQ1_MARK, IRQ2_MARK, IRQ3_MARK,
+	IRQ4_MARK, IRQ5_MARK, IRQ6_MARK, IRQ7_MARK,
+
+	AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
+	AUDCK_MARK, AUDSYNC_MARK,
+
+	SDHI0CD_PTD_MARK, SDHI0WP_PTD_MARK,
+	SDHI0D3_PTD_MARK, SDHI0D2_PTD_MARK,
+	SDHI0D1_PTD_MARK, SDHI0D0_PTD_MARK,
+	SDHI0CMD_PTD_MARK, SDHI0CLK_PTD_MARK,
+
+	SDHI0CD_PTS_MARK, SDHI0WP_PTS_MARK,
+	SDHI0D3_PTS_MARK, SDHI0D2_PTS_MARK,
+	SDHI0D1_PTS_MARK, SDHI0D0_PTS_MARK,
+	SDHI0CMD_PTS_MARK, SDHI0CLK_PTS_MARK,
+
+	SDHI1CD_MARK, SDHI1WP_MARK, SDHI1D3_MARK, SDHI1D2_MARK,
+	SDHI1D1_MARK, SDHI1D0_MARK, SDHI1CMD_MARK, SDHI1CLK_MARK,
+
+	SIUAFCK_MARK, SIUAILR_MARK, SIUAIBT_MARK, SIUAISLD_MARK,
+	SIUAOLR_MARK, SIUAOBT_MARK, SIUAOSLD_MARK, SIUAMCK_MARK,
+	SIUAISPD_MARK, SIUAOSPD_MARK,
+
+	SIUBFCK_MARK, SIUBILR_MARK, SIUBIBT_MARK, SIUBISLD_MARK,
+	SIUBOLR_MARK, SIUBOBT_MARK, SIUBOSLD_MARK, SIUBMCK_MARK,
+
+	IRDA_IN_MARK, IRDA_OUT_MARK,
+
+	DV_CLKI_MARK, DV_CLK_MARK, DV_HSYNC_MARK, DV_VSYNC_MARK,
+	DV_D15_MARK, DV_D14_MARK, DV_D13_MARK, DV_D12_MARK,
+	DV_D11_MARK, DV_D10_MARK, DV_D9_MARK, DV_D8_MARK,
+	DV_D7_MARK, DV_D6_MARK, DV_D5_MARK, DV_D4_MARK,
+	DV_D3_MARK, DV_D2_MARK, DV_D1_MARK, DV_D0_MARK,
+
+	KEYIN0_MARK, KEYIN1_MARK, KEYIN2_MARK, KEYIN3_MARK, KEYIN4_MARK,
+	KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK,
+	KEYOUT4_IN6_MARK, KEYOUT5_IN5_MARK,
+
+	MSIOF0_PTF_TXD_MARK, MSIOF0_PTF_RXD_MARK, MSIOF0_PTF_MCK_MARK,
+	MSIOF0_PTF_TSYNC_MARK, MSIOF0_PTF_TSCK_MARK, MSIOF0_PTF_RSYNC_MARK,
+	MSIOF0_PTF_RSCK_MARK, MSIOF0_PTF_SS1_MARK, MSIOF0_PTF_SS2_MARK,
+
+	MSIOF0_PTT_TXD_MARK, MSIOF0_PTT_RXD_MARK, MSIOF0_PTX_MCK_MARK,
+	MSIOF0_PTT_TSYNC_MARK, MSIOF0_PTT_TSCK_MARK, MSIOF0_PTT_RSYNC_MARK,
+	MSIOF0_PTT_RSCK_MARK, MSIOF0_PTT_SS1_MARK, MSIOF0_PTT_SS2_MARK,
+
+	MSIOF1_TXD_MARK, MSIOF1_RXD_MARK, MSIOF1_MCK_MARK,
+	MSIOF1_TSYNC_MARK, MSIOF1_TSCK_MARK, MSIOF1_RSYNC_MARK,
+	MSIOF1_RSCK_MARK, MSIOF1_SS1_MARK, MSIOF1_SS2_MARK,
+
+	TS0_SDAT_MARK, TS0_SCK_MARK, TS0_SDEN_MARK, TS0_SPSYNC_MARK,
+
+	FCE_MARK, NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
+	NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK, FCDE_MARK,
+	FOE_MARK, FSC_MARK, FWE_MARK, FRB_MARK,
+
+	DACK1_MARK, DREQ1_MARK, DACK0_MARK, DREQ0_MARK,
+
+	AN3_MARK, AN2_MARK, AN1_MARK, AN0_MARK, ADTRG_MARK,
+
+	STATUS0_MARK, PDSTATUS_MARK,
+
+	TPUTO3_MARK, TPUTO2_MARK, TPUTO1_MARK, TPUTO0_MARK,
+
+	D31_MARK, D30_MARK, D29_MARK, D28_MARK,
+	D27_MARK, D26_MARK, D25_MARK, D24_MARK,
+	D23_MARK, D22_MARK, D21_MARK, D20_MARK,
+	D19_MARK, D18_MARK, D17_MARK, D16_MARK,
+	IOIS16_MARK, WAIT_MARK, BS_MARK,
+	A25_MARK, A24_MARK, A23_MARK, A22_MARK,
+	CS6B_CE1B_MARK, CS6A_CE2B_MARK,
+	CS5B_CE1A_MARK, CS5A_CE2A_MARK,
+	WE3_ICIOWR_MARK, WE2_ICIORD_MARK,
+
+	IDED15_MARK, IDED14_MARK, IDED13_MARK, IDED12_MARK,
+	IDED11_MARK, IDED10_MARK, IDED9_MARK, IDED8_MARK,
+	IDED7_MARK, IDED6_MARK, IDED5_MARK, IDED4_MARK,
+	IDED3_MARK, IDED2_MARK, IDED1_MARK, IDED0_MARK,
+	DIRECTION_MARK, EXBUF_ENB_MARK, IDERST_MARK, IODACK_MARK,
+	IODREQ_MARK, IDEIORDY_MARK, IDEINT_MARK, IDEIOWR_MARK,
+	IDEIORD_MARK, IDECS1_MARK, IDECS0_MARK, IDEA2_MARK,
+	IDEA1_MARK, IDEA0_MARK,
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+	/* PTA GPIO */
+	PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
+	PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
+	PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
+	PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT, PTA4_IN_PU),
+	PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT, PTA3_IN_PU),
+	PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT, PTA2_IN_PU),
+	PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT, PTA1_IN_PU),
+	PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT, PTA0_IN_PU),
+
+	/* PTB GPIO */
+	PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
+	PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
+	PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
+	PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
+	PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
+	PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT, PTB2_IN_PU),
+	PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT, PTB1_IN_PU),
+	PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
+
+	/* PTC GPIO */
+	PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
+	PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
+	PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
+	PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
+	PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
+	PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
+	PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
+	PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
+
+	/* PTD GPIO */
+	PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
+	PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
+	PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
+	PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
+	PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
+	PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
+	PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
+	PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
+
+	/* PTE GPIO */
+	PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
+	PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
+	PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
+	PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
+	PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
+	PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
+
+	/* PTF GPIO */
+	PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
+	PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
+	PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
+	PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
+	PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
+	PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
+	PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
+	PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
+
+	/* PTG GPIO */
+	PINMUX_DATA(PTG5_DATA, PTG5_OUT),
+	PINMUX_DATA(PTG4_DATA, PTG4_OUT),
+	PINMUX_DATA(PTG3_DATA, PTG3_OUT),
+	PINMUX_DATA(PTG2_DATA, PTG2_OUT),
+	PINMUX_DATA(PTG1_DATA, PTG1_OUT),
+	PINMUX_DATA(PTG0_DATA, PTG0_OUT),
+
+	/* PTH GPIO */
+	PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
+	PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
+	PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
+	PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
+	PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
+	PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
+	PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
+	PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
+
+	/* PTJ GPIO */
+	PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
+	PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
+	PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
+	PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
+	PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
+	PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
+
+	/* PTK GPIO */
+	PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
+	PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
+	PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
+	PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
+	PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
+	PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
+	PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
+	PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
+
+	/* PTL GPIO */
+	PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
+	PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
+	PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
+	PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
+	PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
+	PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
+	PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
+	PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
+
+	/* PTM GPIO */
+	PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT),
+	PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
+	PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
+	PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
+	PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
+	PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
+	PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
+	PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
+
+	/* PTN GPIO */
+	PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT),
+	PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
+	PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
+	PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
+	PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
+	PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
+	PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
+	PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
+
+	/* PTQ GPIO */
+	PINMUX_DATA(PTQ3_DATA, PTQ3_IN),
+	PINMUX_DATA(PTQ2_DATA, PTQ2_IN),
+	PINMUX_DATA(PTQ1_DATA, PTQ1_IN),
+	PINMUX_DATA(PTQ0_DATA, PTQ0_IN),
+
+	/* PTR GPIO */
+	PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
+	PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
+	PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
+	PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
+	PINMUX_DATA(PTR3_DATA, PTR3_IN),
+	PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_IN_PU),
+	PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
+	PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
+
+	/* PTS GPIO */
+	PINMUX_DATA(PTS7_DATA, PTS7_IN, PTS7_OUT),
+	PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
+	PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
+	PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
+	PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
+	PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
+	PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
+	PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
+
+	/* PTT GPIO */
+	PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
+	PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
+	PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
+	PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
+	PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
+	PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
+
+	/* PTU GPIO */
+	PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
+	PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
+	PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
+	PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
+	PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
+	PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
+
+	/* PTV GPIO */
+	PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
+	PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
+	PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
+	PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
+	PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
+	PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
+	PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
+	PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
+
+	/* PTW GPIO */
+	PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
+	PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
+	PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
+	PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
+	PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
+	PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
+	PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
+	PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
+
+	/* PTX GPIO */
+	PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
+	PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
+	PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
+	PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
+	PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
+	PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
+	PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
+	PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
+
+	/* PTY GPIO */
+	PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
+	PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
+	PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
+	PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
+	PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
+	PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
+	PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
+	PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
+
+	/* PTZ GPIO */
+	PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
+	PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
+	PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
+	PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
+	PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
+	PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
+	PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
+	PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
+
+	/* PTA FN */
+	PINMUX_DATA(D23_MARK, PSA15_PSA14_FN1, PTA7_FN),
+	PINMUX_DATA(KEYOUT2_MARK, PSA15_PSA14_FN2, PTA7_FN),
+	PINMUX_DATA(D22_MARK, PSA15_PSA14_FN1, PTA6_FN),
+	PINMUX_DATA(KEYOUT1_MARK, PSA15_PSA14_FN2, PTA6_FN),
+	PINMUX_DATA(D21_MARK, PSA15_PSA14_FN1, PTA5_FN),
+	PINMUX_DATA(KEYOUT0_MARK, PSA15_PSA14_FN2, PTA5_FN),
+	PINMUX_DATA(D20_MARK, PSA15_PSA14_FN1, PTA4_FN),
+	PINMUX_DATA(KEYIN4_MARK, PSA15_PSA14_FN2, PTA4_FN),
+	PINMUX_DATA(D19_MARK, PSA15_PSA14_FN1, PTA3_FN),
+	PINMUX_DATA(KEYIN3_MARK, PSA15_PSA14_FN2, PTA3_FN),
+	PINMUX_DATA(D18_MARK, PSA15_PSA14_FN1, PTA2_FN),
+	PINMUX_DATA(KEYIN2_MARK, PSA15_PSA14_FN2, PTA2_FN),
+	PINMUX_DATA(D17_MARK, PSA15_PSA14_FN1, PTA1_FN),
+	PINMUX_DATA(KEYIN1_MARK, PSA15_PSA14_FN2, PTA1_FN),
+	PINMUX_DATA(D16_MARK, PSA15_PSA14_FN1, PTA0_FN),
+	PINMUX_DATA(KEYIN0_MARK, PSA15_PSA14_FN2, PTA0_FN),
+
+	/* PTB FN */
+	PINMUX_DATA(D31_MARK, PTB7_FN),
+	PINMUX_DATA(D30_MARK, PTB6_FN),
+	PINMUX_DATA(D29_MARK, PTB5_FN),
+	PINMUX_DATA(D28_MARK, PTB4_FN),
+	PINMUX_DATA(D27_MARK, PTB3_FN),
+	PINMUX_DATA(D26_MARK, PSA15_PSA14_FN1, PTB2_FN),
+	PINMUX_DATA(KEYOUT5_IN5_MARK, PSA15_PSA14_FN2, PTB2_FN),
+	PINMUX_DATA(D25_MARK, PSA15_PSA14_FN1, PTB1_FN),
+	PINMUX_DATA(KEYOUT4_IN6_MARK, PSA15_PSA14_FN2, PTB1_FN),
+	PINMUX_DATA(D24_MARK, PSA15_PSA14_FN1, PTB0_FN),
+	PINMUX_DATA(KEYOUT3_MARK, PSA15_PSA14_FN2, PTB0_FN),
+
+	/* PTC FN */
+	PINMUX_DATA(IDED15_MARK, PSA11_PSA10_FN1, PTC7_FN),
+	PINMUX_DATA(SDHI1CD_MARK, PSA11_PSA10_FN2, PTC7_FN),
+	PINMUX_DATA(IDED14_MARK, PSA11_PSA10_FN1, PTC6_FN),
+	PINMUX_DATA(SDHI1WP_MARK, PSA11_PSA10_FN2, PTC6_FN),
+	PINMUX_DATA(IDED13_MARK, PSA11_PSA10_FN1, PTC5_FN),
+	PINMUX_DATA(SDHI1D3_MARK, PSA11_PSA10_FN2, PTC5_FN),
+	PINMUX_DATA(IDED12_MARK, PSA11_PSA10_FN1, PTC4_FN),
+	PINMUX_DATA(SDHI1D2_MARK, PSA11_PSA10_FN2, PTC4_FN),
+	PINMUX_DATA(IDED11_MARK, PSA11_PSA10_FN1, PTC3_FN),
+	PINMUX_DATA(SDHI1D1_MARK, PSA11_PSA10_FN2, PTC3_FN),
+	PINMUX_DATA(IDED10_MARK, PSA11_PSA10_FN1, PTC2_FN),
+	PINMUX_DATA(SDHI1D0_MARK, PSA11_PSA10_FN2, PTC2_FN),
+	PINMUX_DATA(IDED9_MARK, PSA11_PSA10_FN1, PTC1_FN),
+	PINMUX_DATA(SDHI1CMD_MARK, PSA11_PSA10_FN2, PTC1_FN),
+	PINMUX_DATA(IDED8_MARK, PSA11_PSA10_FN1, PTC0_FN),
+	PINMUX_DATA(SDHI1CLK_MARK, PSA11_PSA10_FN2, PTC0_FN),
+
+	/* PTD FN */
+	PINMUX_DATA(IDED7_MARK, PSA11_PSA10_FN1, PTD7_FN),
+	PINMUX_DATA(SDHI0CD_PTD_MARK, PSA11_PSA10_FN2, PTD7_FN),
+	PINMUX_DATA(IDED6_MARK, PSA11_PSA10_FN1, PTD6_FN),
+	PINMUX_DATA(SDHI0WP_PTD_MARK, PSA11_PSA10_FN2, PTD6_FN),
+	PINMUX_DATA(IDED5_MARK, PSA11_PSA10_FN1, PTD5_FN),
+	PINMUX_DATA(SDHI0D3_PTD_MARK, PSA11_PSA10_FN2, PTD5_FN),
+	PINMUX_DATA(IDED4_MARK, PSA11_PSA10_FN1, PTD4_FN),
+	PINMUX_DATA(SDHI0D2_PTD_MARK, PSA11_PSA10_FN2, PTD4_FN),
+	PINMUX_DATA(IDED3_MARK, PSA11_PSA10_FN1, PTD3_FN),
+	PINMUX_DATA(SDHI0D1_PTD_MARK, PSA11_PSA10_FN2, PTD3_FN),
+	PINMUX_DATA(IDED2_MARK, PSA11_PSA10_FN1, PTD2_FN),
+	PINMUX_DATA(SDHI0D0_PTD_MARK, PSA11_PSA10_FN2, PTD2_FN),
+	PINMUX_DATA(IDED1_MARK, PSA11_PSA10_FN1, PTD1_FN),
+	PINMUX_DATA(SDHI0CMD_PTD_MARK, PSA11_PSA10_FN2, PTD1_FN),
+	PINMUX_DATA(IDED0_MARK, PSA11_PSA10_FN1, PTD0_FN),
+	PINMUX_DATA(SDHI0CLK_PTD_MARK, PSA11_PSA10_FN2, PTD0_FN),
+
+	/* PTE FN */
+	PINMUX_DATA(DIRECTION_MARK, PSA11_PSA10_FN1, PTE5_FN),
+	PINMUX_DATA(SCIF5_PTE_SCK_MARK, PSA11_PSA10_FN2, PTE5_FN),
+	PINMUX_DATA(EXBUF_ENB_MARK, PSA11_PSA10_FN1, PTE4_FN),
+	PINMUX_DATA(SCIF5_PTE_RXD_MARK, PSA11_PSA10_FN2, PTE4_FN),
+	PINMUX_DATA(IDERST_MARK, PSA11_PSA10_FN1, PTE3_FN),
+	PINMUX_DATA(SCIF5_PTE_TXD_MARK, PSA11_PSA10_FN2, PTE3_FN),
+	PINMUX_DATA(IODACK_MARK, PSA11_PSA10_FN1, PTE2_FN),
+	PINMUX_DATA(SCIF4_PTE_SCK_MARK, PSA11_PSA10_FN2, PTE2_FN),
+	PINMUX_DATA(IODREQ_MARK, PSA11_PSA10_FN1, PTE1_FN),
+	PINMUX_DATA(SCIF4_PTE_RXD_MARK, PSA11_PSA10_FN2, PTE1_FN),
+	PINMUX_DATA(IDEIORDY_MARK, PSA11_PSA10_FN1, PTE0_FN),
+	PINMUX_DATA(SCIF4_PTE_TXD_MARK, PSA11_PSA10_FN2, PTE0_FN),
+
+	/* PTF FN */
+	PINMUX_DATA(IDEINT_MARK, PTF7_FN),
+	PINMUX_DATA(IDEIOWR_MARK, PSA5_PSA4_FN1, PTF6_FN),
+	PINMUX_DATA(MSIOF0_PTF_SS2_MARK, PSA5_PSA4_FN2, PTF6_FN),
+	PINMUX_DATA(MSIOF0_PTF_RSYNC_MARK, PSA5_PSA4_FN3, PTF6_FN),
+	PINMUX_DATA(IDEIORD_MARK, PSA5_PSA4_FN1, PTF5_FN),
+	PINMUX_DATA(MSIOF0_PTF_SS1_MARK, PSA5_PSA4_FN2, PTF5_FN),
+	PINMUX_DATA(MSIOF0_PTF_RSCK_MARK, PSA5_PSA4_FN3, PTF5_FN),
+	PINMUX_DATA(IDECS1_MARK, PSA11_PSA10_FN1, PTF4_FN),
+	PINMUX_DATA(MSIOF0_PTF_TSYNC_MARK, PSA11_PSA10_FN2, PTF4_FN),
+	PINMUX_DATA(IDECS0_MARK, PSA11_PSA10_FN1, PTF3_FN),
+	PINMUX_DATA(MSIOF0_PTF_TSCK_MARK, PSA11_PSA10_FN2, PTF3_FN),
+	PINMUX_DATA(IDEA2_MARK, PSA11_PSA10_FN1, PTF2_FN),
+	PINMUX_DATA(MSIOF0_PTF_RXD_MARK, PSA11_PSA10_FN2, PTF2_FN),
+	PINMUX_DATA(IDEA1_MARK, PSA11_PSA10_FN1, PTF1_FN),
+	PINMUX_DATA(MSIOF0_PTF_TXD_MARK, PSA11_PSA10_FN2, PTF1_FN),
+	PINMUX_DATA(IDEA0_MARK, PSA11_PSA10_FN1, PTF0_FN),
+	PINMUX_DATA(MSIOF0_PTF_MCK_MARK, PSA11_PSA10_FN2, PTF0_FN),
+
+	/* PTG FN */
+	PINMUX_DATA(AUDCK_MARK, PTG5_FN),
+	PINMUX_DATA(AUDSYNC_MARK, PTG4_FN),
+	PINMUX_DATA(AUDATA3_MARK, PSA3_PSA2_FN1, PTG3_FN),
+	PINMUX_DATA(TPUTO3_MARK, PSA3_PSA2_FN2, PTG3_FN),
+	PINMUX_DATA(AUDATA2_MARK, PSA3_PSA2_FN1, PTG2_FN),
+	PINMUX_DATA(TPUTO2_MARK, PSA3_PSA2_FN2, PTG2_FN),
+	PINMUX_DATA(AUDATA1_MARK, PSA3_PSA2_FN1, PTG1_FN),
+	PINMUX_DATA(TPUTO1_MARK, PSA3_PSA2_FN2, PTG1_FN),
+	PINMUX_DATA(AUDATA0_MARK, PSA3_PSA2_FN1, PTG0_FN),
+	PINMUX_DATA(TPUTO0_MARK, PSA3_PSA2_FN2, PTG0_FN),
+
+	/* PTG FN */
+	PINMUX_DATA(LCDVCPWC_MARK, PTH7_FN),
+	PINMUX_DATA(LCDRD_MARK, PSB15_PSB14_FN1, PTH6_FN),
+	PINMUX_DATA(DV_CLKI_MARK, PSB15_PSB14_FN2, PTH6_FN),
+	PINMUX_DATA(LCDVSYN_MARK, PSB15_PSB14_FN1, PTH5_FN),
+	PINMUX_DATA(DV_CLK_MARK, PSB15_PSB14_FN2, PTH5_FN),
+	PINMUX_DATA(LCDDISP_MARK, PSB13_PSB12_LCDC_RGB, PTH4_FN),
+	PINMUX_DATA(LCDRS_MARK, PSB13_PSB12_LCDC_SYS, PTH4_FN),
+	PINMUX_DATA(LCDHSYN_MARK, PSB13_PSB12_LCDC_RGB, PTH3_FN),
+	PINMUX_DATA(LCDCS_MARK, PSB13_PSB12_LCDC_SYS, PTH3_FN),
+	PINMUX_DATA(LCDDON_MARK, PTH2_FN),
+	PINMUX_DATA(LCDDCK_MARK, PSB13_PSB12_LCDC_RGB, PTH1_FN),
+	PINMUX_DATA(LCDWR_MARK, PSB13_PSB12_LCDC_SYS, PTH1_FN),
+	PINMUX_DATA(LCDVEPWC_MARK, PTH0_FN),
+
+	/* PTJ FN */
+	PINMUX_DATA(STATUS0_MARK, PTJ7_FN),
+	PINMUX_DATA(PDSTATUS_MARK, PTJ5_FN),
+	PINMUX_DATA(A25_MARK, PTJ3_FN),
+	PINMUX_DATA(A24_MARK, PTJ2_FN),
+	PINMUX_DATA(A23_MARK, PTJ1_FN),
+	PINMUX_DATA(A22_MARK, PTJ0_FN),
+
+	/* PTK FN */
+	PINMUX_DATA(SIUAFCK_MARK, PTK7_FN),
+	PINMUX_DATA(SIUAILR_MARK, PSB9_PSB8_FN1, PTK6_FN),
+	PINMUX_DATA(MSIOF1_SS2_MARK, PSB9_PSB8_FN2, PTK6_FN),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK, PSB9_PSB8_FN3, PTK6_FN),
+	PINMUX_DATA(SIUAIBT_MARK, PSB9_PSB8_FN1, PTK5_FN),
+	PINMUX_DATA(MSIOF1_SS1_MARK, PSB9_PSB8_FN2, PTK5_FN),
+	PINMUX_DATA(MSIOF1_RSCK_MARK, PSB9_PSB8_FN3, PTK5_FN),
+	PINMUX_DATA(SIUAISLD_MARK, PSB7_PSB6_FN1, PTK4_FN),
+	PINMUX_DATA(MSIOF1_RXD_MARK, PSB7_PSB6_FN2, PTK4_FN),
+	PINMUX_DATA(SIUAOLR_MARK, PSB7_PSB6_FN1, PTK3_FN),
+	PINMUX_DATA(MSIOF1_TSYNC_MARK, PSB7_PSB6_FN2, PTK3_FN),
+	PINMUX_DATA(SIUAOBT_MARK, PSB7_PSB6_FN1, PTK2_FN),
+	PINMUX_DATA(MSIOF1_TSCK_MARK, PSB7_PSB6_FN2, PTK2_FN),
+	PINMUX_DATA(SIUAOSLD_MARK, PSB7_PSB6_FN1, PTK1_FN),
+	PINMUX_DATA(MSIOF1_RXD_MARK, PSB7_PSB6_FN2, PTK1_FN),
+	PINMUX_DATA(SIUAMCK_MARK, PSB7_PSB6_FN1, PTK0_FN),
+	PINMUX_DATA(MSIOF1_MCK_MARK, PSB7_PSB6_FN2, PTK0_FN),
+
+	/* PTL FN */
+	PINMUX_DATA(LCDD15_MARK, PSB5_PSB4_FN1, PTL7_FN),
+	PINMUX_DATA(DV_D15_MARK, PSB5_PSB4_FN2, PTL7_FN),
+	PINMUX_DATA(LCDD14_MARK, PSB5_PSB4_FN1, PTL6_FN),
+	PINMUX_DATA(DV_D14_MARK, PSB5_PSB4_FN2, PTL6_FN),
+	PINMUX_DATA(LCDD13_MARK, PSB5_PSB4_FN1, PTL5_FN),
+	PINMUX_DATA(DV_D13_MARK, PSB5_PSB4_FN2, PTL5_FN),
+	PINMUX_DATA(LCDD12_MARK, PSB5_PSB4_FN1, PTL4_FN),
+	PINMUX_DATA(DV_D12_MARK, PSB5_PSB4_FN2, PTL4_FN),
+	PINMUX_DATA(LCDD11_MARK, PSB5_PSB4_FN1, PTL3_FN),
+	PINMUX_DATA(DV_D11_MARK, PSB5_PSB4_FN2, PTL3_FN),
+	PINMUX_DATA(LCDD10_MARK, PSB5_PSB4_FN1, PTL2_FN),
+	PINMUX_DATA(DV_D10_MARK, PSB5_PSB4_FN2, PTL2_FN),
+	PINMUX_DATA(LCDD9_MARK, PSB5_PSB4_FN1, PTL1_FN),
+	PINMUX_DATA(DV_D9_MARK, PSB5_PSB4_FN2, PTL1_FN),
+	PINMUX_DATA(LCDD8_MARK, PSB5_PSB4_FN1, PTL0_FN),
+	PINMUX_DATA(DV_D8_MARK, PSB5_PSB4_FN2, PTL0_FN),
+
+	/* PTM FN */
+	PINMUX_DATA(LCDD7_MARK, PSB5_PSB4_FN1, PTM7_FN),
+	PINMUX_DATA(DV_D7_MARK, PSB5_PSB4_FN2, PTM7_FN),
+	PINMUX_DATA(LCDD6_MARK, PSB5_PSB4_FN1, PTM6_FN),
+	PINMUX_DATA(DV_D6_MARK, PSB5_PSB4_FN2, PTM6_FN),
+	PINMUX_DATA(LCDD5_MARK, PSB5_PSB4_FN1, PTM5_FN),
+	PINMUX_DATA(DV_D5_MARK, PSB5_PSB4_FN2, PTM5_FN),
+	PINMUX_DATA(LCDD4_MARK, PSB5_PSB4_FN1, PTM4_FN),
+	PINMUX_DATA(DV_D4_MARK, PSB5_PSB4_FN2, PTM4_FN),
+	PINMUX_DATA(LCDD3_MARK, PSB5_PSB4_FN1, PTM3_FN),
+	PINMUX_DATA(DV_D3_MARK, PSB5_PSB4_FN2, PTM3_FN),
+	PINMUX_DATA(LCDD2_MARK, PSB5_PSB4_FN1, PTM2_FN),
+	PINMUX_DATA(DV_D2_MARK, PSB5_PSB4_FN2, PTM2_FN),
+	PINMUX_DATA(LCDD1_MARK, PSB5_PSB4_FN1, PTM1_FN),
+	PINMUX_DATA(DV_D1_MARK, PSB5_PSB4_FN2, PTM1_FN),
+	PINMUX_DATA(LCDD0_MARK, PSB5_PSB4_FN1, PTM0_FN),
+	PINMUX_DATA(DV_D0_MARK, PSB5_PSB4_FN2, PTM0_FN),
+
+	/* PTN FN */
+	PINMUX_DATA(LCDD23_MARK, PSB3_PSB2_FN1, PTN7_FN),
+	PINMUX_DATA(SCIF5_PTN_SCK_MARK, PSB3_PSB2_FN2, PTN7_FN),
+	PINMUX_DATA(LCDD22_MARK, PSB3_PSB2_FN1, PTN6_FN),
+	PINMUX_DATA(SCIF5_PTN_RXD_MARK, PSB3_PSB2_FN2, PTN6_FN),
+	PINMUX_DATA(LCDD21_MARK, PSB3_PSB2_FN1, PTN5_FN),
+	PINMUX_DATA(SCIF5_PTN_TXD_MARK, PSB3_PSB2_FN2, PTN5_FN),
+	PINMUX_DATA(LCDD20_MARK, PSB3_PSB2_FN1, PTN4_FN),
+	PINMUX_DATA(SCIF4_PTN_SCK_MARK, PSB3_PSB2_FN2, PTN4_FN),
+	PINMUX_DATA(LCDD19_MARK, PSB3_PSB2_FN1, PTN3_FN),
+	PINMUX_DATA(SCIF4_PTN_RXD_MARK, PSB3_PSB2_FN2, PTN3_FN),
+	PINMUX_DATA(LCDD18_MARK, PSB3_PSB2_FN1, PTN2_FN),
+	PINMUX_DATA(SCIF4_PTN_TXD_MARK, PSB3_PSB2_FN2, PTN2_FN),
+	PINMUX_DATA(LCDD17_MARK, PSB5_PSB4_FN1, PTN1_FN),
+	PINMUX_DATA(DV_VSYNC_MARK, PSB5_PSB4_FN2, PTN1_FN),
+	PINMUX_DATA(LCDD16_MARK, PSB5_PSB4_FN1, PTN0_FN),
+	PINMUX_DATA(DV_HSYNC_MARK, PSB5_PSB4_FN2, PTN0_FN),
+
+	/* PTQ FN */
+	PINMUX_DATA(AN3_MARK, PTQ3_FN),
+	PINMUX_DATA(AN2_MARK, PTQ2_FN),
+	PINMUX_DATA(AN1_MARK, PTQ1_FN),
+	PINMUX_DATA(AN0_MARK, PTQ0_FN),
+
+	/* PTR FN */
+	PINMUX_DATA(CS6B_CE1B_MARK, PTR7_FN),
+	PINMUX_DATA(CS6A_CE2B_MARK, PTR6_FN),
+	PINMUX_DATA(CS5B_CE1A_MARK, PTR5_FN),
+	PINMUX_DATA(CS5A_CE2A_MARK, PTR4_FN),
+	PINMUX_DATA(IOIS16_MARK, PSA13_PSA12_FN1, PTR3_FN),
+	PINMUX_DATA(LCDLCLK_PTR_MARK, PSA13_PSA12_FN2, PTR3_FN),
+	PINMUX_DATA(WAIT_MARK, PTR2_FN),
+	PINMUX_DATA(WE3_ICIOWR_MARK, PTR1_FN),
+	PINMUX_DATA(WE2_ICIORD_MARK, PTR0_FN),
+
+	/* PTS FN */
+	PINMUX_DATA(SCIF1_PTS_SCK_MARK, PSC15_PSC14_FN1, PTS7_FN),
+	PINMUX_DATA(SDHI0CD_PTS_MARK, PSC15_PSC14_FN2, PTS7_FN),
+	PINMUX_DATA(SCIF1_PTS_RXD_MARK, PSC15_PSC14_FN1, PTS6_FN),
+	PINMUX_DATA(SDHI0WP_PTS_MARK, PSC15_PSC14_FN2, PTS6_FN),
+	PINMUX_DATA(SCIF1_PTS_TXD_MARK, PSC15_PSC14_FN1, PTS5_FN),
+	PINMUX_DATA(SDHI0D3_PTS_MARK, PSC15_PSC14_FN2, PTS5_FN),
+	PINMUX_DATA(SCIF3_PTS_CTS_MARK, PSC15_PSC14_FN1, PTS4_FN),
+	PINMUX_DATA(SDHI0D2_PTS_MARK, PSC15_PSC14_FN2, PTS4_FN),
+	PINMUX_DATA(SCIF3_PTS_RTS_MARK, PSC15_PSC14_FN1, PTS3_FN),
+	PINMUX_DATA(SDHI0D1_PTS_MARK, PSC15_PSC14_FN2, PTS3_FN),
+	PINMUX_DATA(SCIF3_PTS_SCK_MARK, PSC15_PSC14_FN1, PTS2_FN),
+	PINMUX_DATA(SDHI0D0_PTS_MARK, PSC15_PSC14_FN2, PTS2_FN),
+	PINMUX_DATA(SCIF3_PTS_RXD_MARK, PSC15_PSC14_FN1, PTS1_FN),
+	PINMUX_DATA(SDHI0CMD_PTS_MARK, PSC15_PSC14_FN2, PTS1_FN),
+	PINMUX_DATA(SCIF3_PTS_TXD_MARK, PSC15_PSC14_FN1, PTS0_FN),
+	PINMUX_DATA(SDHI0CLK_PTS_MARK, PSC15_PSC14_FN2, PTS0_FN),
+
+	/* PTT FN */
+	PINMUX_DATA(SCIF0_PTT_SCK_MARK, PSC13_PSC12_FN1, PTT5_FN),
+	PINMUX_DATA(MSIOF0_PTT_TSCK_MARK, PSC13_PSC12_FN2, PTT5_FN),
+	PINMUX_DATA(SCIF0_PTT_RXD_MARK, PSC13_PSC12_FN1, PTT4_FN),
+	PINMUX_DATA(MSIOF0_PTT_RXD_MARK, PSC13_PSC12_FN2, PTT4_FN),
+	PINMUX_DATA(SCIF0_PTT_TXD_MARK, PSC13_PSC12_FN1, PTT3_FN),
+	PINMUX_DATA(MSIOF0_PTT_TXD_MARK, PSC13_PSC12_FN2, PTT3_FN),
+	PINMUX_DATA(SCIF2_PTT_SCK_MARK, PSC11_PSC10_FN1, PTT2_FN),
+	PINMUX_DATA(MSIOF0_PTT_TSYNC_MARK, PSC11_PSC10_FN2, PTT2_FN),
+	PINMUX_DATA(SCIF2_PTT_RXD_MARK, PSC11_PSC10_FN1, PTT1_FN),
+	PINMUX_DATA(MSIOF0_PTT_SS1_MARK, PSC11_PSC10_FN2, PTT1_FN),
+	PINMUX_DATA(MSIOF0_PTT_RSCK_MARK, PSC11_PSC10_FN3, PTT1_FN),
+	PINMUX_DATA(SCIF2_PTT_TXD_MARK, PSC11_PSC10_FN1, PTT0_FN),
+	PINMUX_DATA(MSIOF0_PTT_SS2_MARK, PSC11_PSC10_FN2, PTT0_FN),
+	PINMUX_DATA(MSIOF0_PTT_RSYNC_MARK, PSC11_PSC10_FN3, PTT0_FN),
+
+	/* PTU FN */
+	PINMUX_DATA(FCDE_MARK, PSC9_PSC8_FN1, PTU5_FN),
+	PINMUX_DATA(SCIF0_PTU_SCK_MARK, PSC9_PSC8_FN2, PTU5_FN),
+	PINMUX_DATA(FSC_MARK, PSC9_PSC8_FN1, PTU4_FN),
+	PINMUX_DATA(SCIF0_PTU_RXD_MARK, PSC9_PSC8_FN2, PTU4_FN),
+	PINMUX_DATA(FWE_MARK, PSC9_PSC8_FN1, PTU3_FN),
+	PINMUX_DATA(SCIF0_PTU_TXD_MARK, PSC9_PSC8_FN2, PTU3_FN),
+	PINMUX_DATA(FOE_MARK, PSC7_PSC6_FN1, PTU2_FN),
+	PINMUX_DATA(SCIF2_PTU_SCK_MARK, PSC7_PSC6_FN2, PTU2_FN),
+	PINMUX_DATA(VIO_VD2_MARK, PSC7_PSC6_FN3, PTU2_FN),
+	PINMUX_DATA(FRB_MARK, PSC7_PSC6_FN1, PTU1_FN),
+	PINMUX_DATA(SCIF2_PTU_RXD_MARK, PSC7_PSC6_FN2, PTU1_FN),
+	PINMUX_DATA(VIO_CLK2_MARK, PSC7_PSC6_FN3, PTU1_FN),
+	PINMUX_DATA(FCE_MARK, PSC7_PSC6_FN1, PTU0_FN),
+	PINMUX_DATA(SCIF2_PTU_TXD_MARK, PSC7_PSC6_FN2, PTU0_FN),
+	PINMUX_DATA(VIO_HD2_MARK, PSC7_PSC6_FN3, PTU0_FN),
+
+	/* PTV FN */
+	PINMUX_DATA(NAF7_MARK, PSC7_PSC6_FN1, PTV7_FN),
+	PINMUX_DATA(SCIF1_PTV_SCK_MARK, PSC7_PSC6_FN2, PTV7_FN),
+	PINMUX_DATA(VIO_D15_MARK, PSC7_PSC6_FN3, PTV7_FN),
+	PINMUX_DATA(NAF6_MARK, PSC7_PSC6_FN1, PTV6_FN),
+	PINMUX_DATA(SCIF1_PTV_RXD_MARK, PSC7_PSC6_FN2, PTV6_FN),
+	PINMUX_DATA(VIO_D14_MARK, PSC7_PSC6_FN3, PTV6_FN),
+	PINMUX_DATA(NAF5_MARK, PSC7_PSC6_FN1, PTV5_FN),
+	PINMUX_DATA(SCIF1_PTV_TXD_MARK, PSC7_PSC6_FN2, PTV5_FN),
+	PINMUX_DATA(VIO_D13_MARK, PSC7_PSC6_FN3, PTV5_FN),
+	PINMUX_DATA(NAF4_MARK, PSC7_PSC6_FN1, PTV4_FN),
+	PINMUX_DATA(SCIF3_PTV_CTS_MARK, PSC7_PSC6_FN2, PTV4_FN),
+	PINMUX_DATA(VIO_D12_MARK, PSC7_PSC6_FN3, PTV4_FN),
+	PINMUX_DATA(NAF3_MARK, PSC7_PSC6_FN1, PTV3_FN),
+	PINMUX_DATA(SCIF3_PTV_RTS_MARK, PSC7_PSC6_FN2, PTV3_FN),
+	PINMUX_DATA(VIO_D11_MARK, PSC7_PSC6_FN3, PTV3_FN),
+	PINMUX_DATA(NAF2_MARK, PSC7_PSC6_FN1, PTV2_FN),
+	PINMUX_DATA(SCIF3_PTV_SCK_MARK, PSC7_PSC6_FN2, PTV2_FN),
+	PINMUX_DATA(VIO_D10_MARK, PSC7_PSC6_FN3, PTV2_FN),
+	PINMUX_DATA(NAF1_MARK, PSC7_PSC6_FN1, PTV1_FN),
+	PINMUX_DATA(SCIF3_PTV_RXD_MARK, PSC7_PSC6_FN2, PTV1_FN),
+	PINMUX_DATA(VIO_D9_MARK, PSC7_PSC6_FN3, PTV1_FN),
+	PINMUX_DATA(NAF0_MARK, PSC7_PSC6_FN1, PTV0_FN),
+	PINMUX_DATA(SCIF3_PTV_TXD_MARK, PSC7_PSC6_FN2, PTV0_FN),
+	PINMUX_DATA(VIO_D8_MARK, PSC7_PSC6_FN3, PTV0_FN),
+
+	/* PTW FN */
+	PINMUX_DATA(IRQ7_MARK, PTW7_FN),
+	PINMUX_DATA(IRQ6_MARK, PTW6_FN),
+	PINMUX_DATA(IRQ5_MARK, PTW5_FN),
+	PINMUX_DATA(IRQ4_MARK, PSD15_PSD14_FN1, PTW4_FN),
+	PINMUX_DATA(LCDLCLK_PTW_MARK, PSD15_PSD14_FN2, PTW4_FN),
+	PINMUX_DATA(IRQ3_MARK, PSD13_PSD12_FN1, PTW3_FN),
+	PINMUX_DATA(ADTRG_MARK, PSD13_PSD12_FN2, PTW3_FN),
+	PINMUX_DATA(IRQ2_MARK, PSD11_PSD10_FN1, PTW2_FN),
+	PINMUX_DATA(BS_MARK, PSD11_PSD10_FN2, PTW2_FN),
+	PINMUX_DATA(VIO_CKO_MARK, PSD11_PSD10_FN3, PTW2_FN),
+	PINMUX_DATA(IRQ1_MARK, PSD9_PSD8_FN1, PTW1_FN),
+	PINMUX_DATA(SIUAISPD_MARK, PSD9_PSD8_FN2, PTW1_FN),
+	PINMUX_DATA(IRQ0_MARK, PSD7_PSD6_FN1, PTW0_FN),
+	PINMUX_DATA(SIUAOSPD_MARK, PSD7_PSD6_FN2, PTW0_FN),
+
+	/* PTX FN */
+	PINMUX_DATA(DACK1_MARK, PTX7_FN),
+	PINMUX_DATA(DREQ1_MARK, PSD3_PSD2_FN1, PTX6_FN),
+	PINMUX_DATA(MSIOF0_PTX_MCK_MARK, PSD3_PSD2_FN2, PTX6_FN),
+	PINMUX_DATA(DACK1_MARK, PTX5_FN),
+	PINMUX_DATA(IRDA_OUT_MARK, PSD5_PSD4_FN2, PTX5_FN),
+	PINMUX_DATA(DREQ1_MARK, PTX4_FN),
+	PINMUX_DATA(IRDA_IN_MARK, PSD5_PSD4_FN2, PTX4_FN),
+	PINMUX_DATA(TS0_SDAT_MARK, PTX3_FN),
+	PINMUX_DATA(TS0_SCK_MARK, PTX2_FN),
+	PINMUX_DATA(TS0_SDEN_MARK, PTX1_FN),
+	PINMUX_DATA(TS0_SPSYNC_MARK, PTX0_FN),
+
+	/* PTY FN */
+	PINMUX_DATA(VIO_D7_MARK, PTY7_FN),
+	PINMUX_DATA(VIO_D6_MARK, PTY6_FN),
+	PINMUX_DATA(VIO_D5_MARK, PTY5_FN),
+	PINMUX_DATA(VIO_D4_MARK, PTY4_FN),
+	PINMUX_DATA(VIO_D3_MARK, PTY3_FN),
+	PINMUX_DATA(VIO_D2_MARK, PTY2_FN),
+	PINMUX_DATA(VIO_D1_MARK, PTY1_FN),
+	PINMUX_DATA(VIO_D0_MARK, PTY0_FN),
+
+	/* PTZ FN */
+	PINMUX_DATA(SIUBOBT_MARK, PTZ7_FN),
+	PINMUX_DATA(SIUBOLR_MARK, PTZ6_FN),
+	PINMUX_DATA(SIUBOSLD_MARK, PTZ5_FN),
+	PINMUX_DATA(SIUBMCK_MARK, PTZ4_FN),
+	PINMUX_DATA(VIO_FLD_MARK, PSD1_PSD0_FN1, PTZ3_FN),
+	PINMUX_DATA(SIUBFCK_MARK, PSD1_PSD0_FN2, PTZ3_FN),
+	PINMUX_DATA(VIO_HD1_MARK, PSD1_PSD0_FN1, PTZ2_FN),
+	PINMUX_DATA(SIUBILR_MARK, PSD1_PSD0_FN2, PTZ2_FN),
+	PINMUX_DATA(VIO_VD1_MARK, PSD1_PSD0_FN1, PTZ1_FN),
+	PINMUX_DATA(SIUBIBT_MARK, PSD1_PSD0_FN2, PTZ1_FN),
+	PINMUX_DATA(VIO_CLK1_MARK, PSD1_PSD0_FN1, PTZ0_FN),
+	PINMUX_DATA(SIUBISLD_MARK, PSD1_PSD0_FN2, PTZ0_FN),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* PTA */
+	PINMUX_GPIO(GPIO_PTA7, PTA7_DATA),
+	PINMUX_GPIO(GPIO_PTA6, PTA6_DATA),
+	PINMUX_GPIO(GPIO_PTA5, PTA5_DATA),
+	PINMUX_GPIO(GPIO_PTA4, PTA4_DATA),
+	PINMUX_GPIO(GPIO_PTA3, PTA3_DATA),
+	PINMUX_GPIO(GPIO_PTA2, PTA2_DATA),
+	PINMUX_GPIO(GPIO_PTA1, PTA1_DATA),
+	PINMUX_GPIO(GPIO_PTA0, PTA0_DATA),
+
+	/* PTB */
+	PINMUX_GPIO(GPIO_PTB7, PTB7_DATA),
+	PINMUX_GPIO(GPIO_PTB6, PTB6_DATA),
+	PINMUX_GPIO(GPIO_PTB5, PTB5_DATA),
+	PINMUX_GPIO(GPIO_PTB4, PTB4_DATA),
+	PINMUX_GPIO(GPIO_PTB3, PTB3_DATA),
+	PINMUX_GPIO(GPIO_PTB2, PTB2_DATA),
+	PINMUX_GPIO(GPIO_PTB1, PTB1_DATA),
+	PINMUX_GPIO(GPIO_PTB0, PTB0_DATA),
+
+	/* PTC */
+	PINMUX_GPIO(GPIO_PTC7, PTC7_DATA),
+	PINMUX_GPIO(GPIO_PTC6, PTC6_DATA),
+	PINMUX_GPIO(GPIO_PTC5, PTC5_DATA),
+	PINMUX_GPIO(GPIO_PTC4, PTC4_DATA),
+	PINMUX_GPIO(GPIO_PTC3, PTC3_DATA),
+	PINMUX_GPIO(GPIO_PTC2, PTC2_DATA),
+	PINMUX_GPIO(GPIO_PTC1, PTC1_DATA),
+	PINMUX_GPIO(GPIO_PTC0, PTC0_DATA),
+
+	/* PTD */
+	PINMUX_GPIO(GPIO_PTD7, PTD7_DATA),
+	PINMUX_GPIO(GPIO_PTD6, PTD6_DATA),
+	PINMUX_GPIO(GPIO_PTD5, PTD5_DATA),
+	PINMUX_GPIO(GPIO_PTD4, PTD4_DATA),
+	PINMUX_GPIO(GPIO_PTD3, PTD3_DATA),
+	PINMUX_GPIO(GPIO_PTD2, PTD2_DATA),
+	PINMUX_GPIO(GPIO_PTD1, PTD1_DATA),
+	PINMUX_GPIO(GPIO_PTD0, PTD0_DATA),
+
+	/* PTE */
+	PINMUX_GPIO(GPIO_PTE5, PTE5_DATA),
+	PINMUX_GPIO(GPIO_PTE4, PTE4_DATA),
+	PINMUX_GPIO(GPIO_PTE3, PTE3_DATA),
+	PINMUX_GPIO(GPIO_PTE2, PTE2_DATA),
+	PINMUX_GPIO(GPIO_PTE1, PTE1_DATA),
+	PINMUX_GPIO(GPIO_PTE0, PTE0_DATA),
+
+	/* PTF */
+	PINMUX_GPIO(GPIO_PTF7, PTF7_DATA),
+	PINMUX_GPIO(GPIO_PTF6, PTF6_DATA),
+	PINMUX_GPIO(GPIO_PTF5, PTF5_DATA),
+	PINMUX_GPIO(GPIO_PTF4, PTF4_DATA),
+	PINMUX_GPIO(GPIO_PTF3, PTF3_DATA),
+	PINMUX_GPIO(GPIO_PTF2, PTF2_DATA),
+	PINMUX_GPIO(GPIO_PTF1, PTF1_DATA),
+	PINMUX_GPIO(GPIO_PTF0, PTF0_DATA),
+
+	/* PTG */
+	PINMUX_GPIO(GPIO_PTG5, PTG5_DATA),
+	PINMUX_GPIO(GPIO_PTG4, PTG4_DATA),
+	PINMUX_GPIO(GPIO_PTG3, PTG3_DATA),
+	PINMUX_GPIO(GPIO_PTG2, PTG2_DATA),
+	PINMUX_GPIO(GPIO_PTG1, PTG1_DATA),
+	PINMUX_GPIO(GPIO_PTG0, PTG0_DATA),
+
+	/* PTH */
+	PINMUX_GPIO(GPIO_PTH7, PTH7_DATA),
+	PINMUX_GPIO(GPIO_PTH6, PTH6_DATA),
+	PINMUX_GPIO(GPIO_PTH5, PTH5_DATA),
+	PINMUX_GPIO(GPIO_PTH4, PTH4_DATA),
+	PINMUX_GPIO(GPIO_PTH3, PTH3_DATA),
+	PINMUX_GPIO(GPIO_PTH2, PTH2_DATA),
+	PINMUX_GPIO(GPIO_PTH1, PTH1_DATA),
+	PINMUX_GPIO(GPIO_PTH0, PTH0_DATA),
+
+	/* PTJ */
+	PINMUX_GPIO(GPIO_PTJ7, PTJ7_DATA),
+	PINMUX_GPIO(GPIO_PTJ5, PTJ5_DATA),
+	PINMUX_GPIO(GPIO_PTJ3, PTJ3_DATA),
+	PINMUX_GPIO(GPIO_PTJ2, PTJ2_DATA),
+	PINMUX_GPIO(GPIO_PTJ1, PTJ1_DATA),
+	PINMUX_GPIO(GPIO_PTJ0, PTJ0_DATA),
+
+	/* PTK */
+	PINMUX_GPIO(GPIO_PTK7, PTK7_DATA),
+	PINMUX_GPIO(GPIO_PTK6, PTK6_DATA),
+	PINMUX_GPIO(GPIO_PTK5, PTK5_DATA),
+	PINMUX_GPIO(GPIO_PTK4, PTK4_DATA),
+	PINMUX_GPIO(GPIO_PTK3, PTK3_DATA),
+	PINMUX_GPIO(GPIO_PTK2, PTK2_DATA),
+	PINMUX_GPIO(GPIO_PTK1, PTK1_DATA),
+	PINMUX_GPIO(GPIO_PTK0, PTK0_DATA),
+
+	/* PTL */
+	PINMUX_GPIO(GPIO_PTL7, PTL7_DATA),
+	PINMUX_GPIO(GPIO_PTL6, PTL6_DATA),
+	PINMUX_GPIO(GPIO_PTL5, PTL5_DATA),
+	PINMUX_GPIO(GPIO_PTL4, PTL4_DATA),
+	PINMUX_GPIO(GPIO_PTL3, PTL3_DATA),
+	PINMUX_GPIO(GPIO_PTL2, PTL2_DATA),
+	PINMUX_GPIO(GPIO_PTL1, PTL1_DATA),
+	PINMUX_GPIO(GPIO_PTL0, PTL0_DATA),
+
+	/* PTM */
+	PINMUX_GPIO(GPIO_PTM7, PTM7_DATA),
+	PINMUX_GPIO(GPIO_PTM6, PTM6_DATA),
+	PINMUX_GPIO(GPIO_PTM5, PTM5_DATA),
+	PINMUX_GPIO(GPIO_PTM4, PTM4_DATA),
+	PINMUX_GPIO(GPIO_PTM3, PTM3_DATA),
+	PINMUX_GPIO(GPIO_PTM2, PTM2_DATA),
+	PINMUX_GPIO(GPIO_PTM1, PTM1_DATA),
+	PINMUX_GPIO(GPIO_PTM0, PTM0_DATA),
+
+	/* PTN */
+	PINMUX_GPIO(GPIO_PTN7, PTN7_DATA),
+	PINMUX_GPIO(GPIO_PTN6, PTN6_DATA),
+	PINMUX_GPIO(GPIO_PTN5, PTN5_DATA),
+	PINMUX_GPIO(GPIO_PTN4, PTN4_DATA),
+	PINMUX_GPIO(GPIO_PTN3, PTN3_DATA),
+	PINMUX_GPIO(GPIO_PTN2, PTN2_DATA),
+	PINMUX_GPIO(GPIO_PTN1, PTN1_DATA),
+	PINMUX_GPIO(GPIO_PTN0, PTN0_DATA),
+
+	/* PTQ */
+	PINMUX_GPIO(GPIO_PTQ3, PTQ3_DATA),
+	PINMUX_GPIO(GPIO_PTQ2, PTQ2_DATA),
+	PINMUX_GPIO(GPIO_PTQ1, PTQ1_DATA),
+	PINMUX_GPIO(GPIO_PTQ0, PTQ0_DATA),
+
+	/* PTR */
+	PINMUX_GPIO(GPIO_PTR7, PTR7_DATA),
+	PINMUX_GPIO(GPIO_PTR6, PTR6_DATA),
+	PINMUX_GPIO(GPIO_PTR5, PTR5_DATA),
+	PINMUX_GPIO(GPIO_PTR4, PTR4_DATA),
+	PINMUX_GPIO(GPIO_PTR3, PTR3_DATA),
+	PINMUX_GPIO(GPIO_PTR2, PTR2_DATA),
+	PINMUX_GPIO(GPIO_PTR1, PTR1_DATA),
+	PINMUX_GPIO(GPIO_PTR0, PTR0_DATA),
+
+	/* PTS */
+	PINMUX_GPIO(GPIO_PTS7, PTS7_DATA),
+	PINMUX_GPIO(GPIO_PTS6, PTS6_DATA),
+	PINMUX_GPIO(GPIO_PTS5, PTS5_DATA),
+	PINMUX_GPIO(GPIO_PTS4, PTS4_DATA),
+	PINMUX_GPIO(GPIO_PTS3, PTS3_DATA),
+	PINMUX_GPIO(GPIO_PTS2, PTS2_DATA),
+	PINMUX_GPIO(GPIO_PTS1, PTS1_DATA),
+	PINMUX_GPIO(GPIO_PTS0, PTS0_DATA),
+
+	/* PTT */
+	PINMUX_GPIO(GPIO_PTT5, PTT5_DATA),
+	PINMUX_GPIO(GPIO_PTT4, PTT4_DATA),
+	PINMUX_GPIO(GPIO_PTT3, PTT3_DATA),
+	PINMUX_GPIO(GPIO_PTT2, PTT2_DATA),
+	PINMUX_GPIO(GPIO_PTT1, PTT1_DATA),
+	PINMUX_GPIO(GPIO_PTT0, PTT0_DATA),
+
+	/* PTU */
+	PINMUX_GPIO(GPIO_PTU5, PTU5_DATA),
+	PINMUX_GPIO(GPIO_PTU4, PTU4_DATA),
+	PINMUX_GPIO(GPIO_PTU3, PTU3_DATA),
+	PINMUX_GPIO(GPIO_PTU2, PTU2_DATA),
+	PINMUX_GPIO(GPIO_PTU1, PTU1_DATA),
+	PINMUX_GPIO(GPIO_PTU0, PTU0_DATA),
+
+	/* PTV */
+	PINMUX_GPIO(GPIO_PTV7, PTV7_DATA),
+	PINMUX_GPIO(GPIO_PTV6, PTV6_DATA),
+	PINMUX_GPIO(GPIO_PTV5, PTV5_DATA),
+	PINMUX_GPIO(GPIO_PTV4, PTV4_DATA),
+	PINMUX_GPIO(GPIO_PTV3, PTV3_DATA),
+	PINMUX_GPIO(GPIO_PTV2, PTV2_DATA),
+	PINMUX_GPIO(GPIO_PTV1, PTV1_DATA),
+	PINMUX_GPIO(GPIO_PTV0, PTV0_DATA),
+
+	/* PTW */
+	PINMUX_GPIO(GPIO_PTW7, PTW7_DATA),
+	PINMUX_GPIO(GPIO_PTW6, PTW6_DATA),
+	PINMUX_GPIO(GPIO_PTW5, PTW5_DATA),
+	PINMUX_GPIO(GPIO_PTW4, PTW4_DATA),
+	PINMUX_GPIO(GPIO_PTW3, PTW3_DATA),
+	PINMUX_GPIO(GPIO_PTW2, PTW2_DATA),
+	PINMUX_GPIO(GPIO_PTW1, PTW1_DATA),
+	PINMUX_GPIO(GPIO_PTW0, PTW0_DATA),
+
+	/* PTX */
+	PINMUX_GPIO(GPIO_PTX7, PTX7_DATA),
+	PINMUX_GPIO(GPIO_PTX6, PTX6_DATA),
+	PINMUX_GPIO(GPIO_PTX5, PTX5_DATA),
+	PINMUX_GPIO(GPIO_PTX4, PTX4_DATA),
+	PINMUX_GPIO(GPIO_PTX3, PTX3_DATA),
+	PINMUX_GPIO(GPIO_PTX2, PTX2_DATA),
+	PINMUX_GPIO(GPIO_PTX1, PTX1_DATA),
+	PINMUX_GPIO(GPIO_PTX0, PTX0_DATA),
+
+	/* PTY */
+	PINMUX_GPIO(GPIO_PTY7, PTY7_DATA),
+	PINMUX_GPIO(GPIO_PTY6, PTY6_DATA),
+	PINMUX_GPIO(GPIO_PTY5, PTY5_DATA),
+	PINMUX_GPIO(GPIO_PTY4, PTY4_DATA),
+	PINMUX_GPIO(GPIO_PTY3, PTY3_DATA),
+	PINMUX_GPIO(GPIO_PTY2, PTY2_DATA),
+	PINMUX_GPIO(GPIO_PTY1, PTY1_DATA),
+	PINMUX_GPIO(GPIO_PTY0, PTY0_DATA),
+
+	/* PTZ */
+	PINMUX_GPIO(GPIO_PTZ7, PTZ7_DATA),
+	PINMUX_GPIO(GPIO_PTZ6, PTZ6_DATA),
+	PINMUX_GPIO(GPIO_PTZ5, PTZ5_DATA),
+	PINMUX_GPIO(GPIO_PTZ4, PTZ4_DATA),
+	PINMUX_GPIO(GPIO_PTZ3, PTZ3_DATA),
+	PINMUX_GPIO(GPIO_PTZ2, PTZ2_DATA),
+	PINMUX_GPIO(GPIO_PTZ1, PTZ1_DATA),
+	PINMUX_GPIO(GPIO_PTZ0, PTZ0_DATA),
+
+	/* SCIF0 */
+	PINMUX_GPIO(GPIO_FN_SCIF0_PTT_TXD, SCIF0_PTT_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_PTT_RXD, SCIF0_PTT_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_PTT_SCK, SCIF0_PTT_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_PTU_TXD, SCIF0_PTU_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_PTU_RXD, SCIF0_PTU_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_PTU_SCK, SCIF0_PTU_SCK_MARK),
+
+	/* SCIF1 */
+	PINMUX_GPIO(GPIO_FN_SCIF1_PTS_TXD, SCIF1_PTS_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_PTS_RXD, SCIF1_PTS_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_PTS_SCK, SCIF1_PTS_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_PTV_TXD, SCIF1_PTV_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_PTV_RXD, SCIF1_PTV_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_PTV_SCK, SCIF1_PTV_SCK_MARK),
+
+	/* SCIF2 */
+	PINMUX_GPIO(GPIO_FN_SCIF2_PTT_TXD, SCIF2_PTT_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_PTT_RXD, SCIF2_PTT_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_PTT_SCK, SCIF2_PTT_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_PTU_TXD, SCIF2_PTU_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_PTU_RXD, SCIF2_PTU_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_PTU_SCK, SCIF2_PTU_SCK_MARK),
+
+	/* SCIF3 */
+	PINMUX_GPIO(GPIO_FN_SCIF3_PTS_TXD, SCIF3_PTS_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_PTS_RXD, SCIF3_PTS_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_PTS_SCK, SCIF3_PTS_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_PTS_RTS, SCIF3_PTS_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_PTS_CTS, SCIF3_PTS_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_PTV_TXD, SCIF3_PTV_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_PTV_RXD, SCIF3_PTV_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_PTV_SCK, SCIF3_PTV_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_PTV_RTS, SCIF3_PTV_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_PTV_CTS, SCIF3_PTV_CTS_MARK),
+
+	/* SCIF4 */
+	PINMUX_GPIO(GPIO_FN_SCIF4_PTE_TXD, SCIF4_PTE_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_PTE_RXD, SCIF4_PTE_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_PTE_SCK, SCIF4_PTE_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_PTN_TXD, SCIF4_PTN_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_PTN_RXD, SCIF4_PTN_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_PTN_SCK, SCIF4_PTN_SCK_MARK),
+
+	/* SCIF5 */
+	PINMUX_GPIO(GPIO_FN_SCIF5_PTE_TXD, SCIF5_PTE_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_PTE_RXD, SCIF5_PTE_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_PTE_SCK, SCIF5_PTE_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_PTN_TXD, SCIF5_PTN_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_PTN_RXD, SCIF5_PTN_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_PTN_SCK, SCIF5_PTN_SCK_MARK),
+
+	/* CEU */
+	PINMUX_GPIO(GPIO_FN_VIO_D15, VIO_D15_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D14, VIO_D14_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D13, VIO_D13_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D12, VIO_D12_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D11, VIO_D11_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D10, VIO_D10_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D9, VIO_D9_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D8, VIO_D8_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D7, VIO_D7_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D6, VIO_D6_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D5, VIO_D5_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D4, VIO_D4_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D3, VIO_D3_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D2, VIO_D2_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D1, VIO_D1_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_D0, VIO_D0_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_CLK1, VIO_CLK1_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_VD1, VIO_VD1_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_HD1, VIO_HD1_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_FLD, VIO_FLD_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_CKO, VIO_CKO_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_VD2, VIO_VD2_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_HD2, VIO_HD2_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO_CLK2, VIO_CLK2_MARK),
+
+	/* LCDC */
+	PINMUX_GPIO(GPIO_FN_LCDD23, LCDD23_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD22, LCDD22_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD21, LCDD21_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD20, LCDD20_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD19, LCDD19_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD18, LCDD18_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD17, LCDD17_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD16, LCDD16_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD15, LCDD15_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD14, LCDD14_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD13, LCDD13_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD12, LCDD12_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD11, LCDD11_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD10, LCDD10_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD9, LCDD9_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD8, LCDD8_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD7, LCDD7_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD6, LCDD6_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD5, LCDD5_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD4, LCDD4_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD3, LCDD3_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD2, LCDD2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD1, LCDD1_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD0, LCDD0_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDLCLK_PTR, LCDLCLK_PTR_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDLCLK_PTW, LCDLCLK_PTW_MARK),
+	/* Main LCD */
+	PINMUX_GPIO(GPIO_FN_LCDDON, LCDDON_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVCPWC, LCDVCPWC_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVEPWC, LCDVEPWC_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVSYN, LCDVSYN_MARK),
+	/* Main LCD - RGB Mode */
+	PINMUX_GPIO(GPIO_FN_LCDDCK, LCDDCK_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDHSYN, LCDHSYN_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDDISP, LCDDISP_MARK),
+	/* Main LCD - SYS Mode */
+	PINMUX_GPIO(GPIO_FN_LCDRS, LCDRS_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDCS, LCDCS_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDWR, LCDWR_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDRD, LCDRD_MARK),
+
+	/* IRQ */
+	PINMUX_GPIO(GPIO_FN_IRQ0, IRQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ1, IRQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ2, IRQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ3, IRQ3_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ4, IRQ4_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ5, IRQ5_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ6, IRQ6_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ7, IRQ7_MARK),
+
+	/* AUD */
+	PINMUX_GPIO(GPIO_FN_AUDCK, AUDCK_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDSYNC, AUDSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA3, AUDATA3_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA2, AUDATA2_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA1, AUDATA1_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA0, AUDATA0_MARK),
+
+	/* SDHI0 (PTD) */
+	PINMUX_GPIO(GPIO_FN_SDHI0CD_PTD, SDHI0CD_PTD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0WP_PTD, SDHI0WP_PTD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D3_PTD, SDHI0D3_PTD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D2_PTD, SDHI0D2_PTD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D1_PTD, SDHI0D1_PTD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D0_PTD, SDHI0D0_PTD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0CMD_PTD, SDHI0CMD_PTD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0CLK_PTD, SDHI0CLK_PTD_MARK),
+
+	/* SDHI0 (PTS) */
+	PINMUX_GPIO(GPIO_FN_SDHI0CD_PTS, SDHI0CD_PTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0WP_PTS, SDHI0WP_PTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D3_PTS, SDHI0D3_PTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D2_PTS, SDHI0D2_PTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D1_PTS, SDHI0D1_PTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D0_PTS, SDHI0D0_PTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0CMD_PTS, SDHI0CMD_PTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0CLK_PTS, SDHI0CLK_PTS_MARK),
+
+	/* SDHI1 */
+	PINMUX_GPIO(GPIO_FN_SDHI1CD, SDHI1CD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1WP, SDHI1WP_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1D3, SDHI1D3_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1D2, SDHI1D2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1D1, SDHI1D1_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1D0, SDHI1D0_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1CMD, SDHI1CMD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1CLK, SDHI1CLK_MARK),
+
+	/* SIUA */
+	PINMUX_GPIO(GPIO_FN_SIUAFCK, SIUAFCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAILR, SIUAILR_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAIBT, SIUAIBT_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAISLD, SIUAISLD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAOLR, SIUAOLR_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAOBT, SIUAOBT_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAOSLD, SIUAOSLD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAMCK, SIUAMCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUAISPD, SIUAISPD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUOSPD, SIUAOSPD_MARK),
+
+	/* SIUB */
+	PINMUX_GPIO(GPIO_FN_SIUBFCK, SIUBFCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBILR, SIUBILR_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBIBT, SIUBIBT_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBISLD, SIUBISLD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBOLR, SIUBOLR_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBOBT, SIUBOBT_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBOSLD, SIUBOSLD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIUBMCK, SIUBMCK_MARK),
+
+	/* IRDA */
+	PINMUX_GPIO(GPIO_FN_IRDA_IN, IRDA_IN_MARK),
+	PINMUX_GPIO(GPIO_FN_IRDA_OUT, IRDA_OUT_MARK),
+
+	/* VOU */
+	PINMUX_GPIO(GPIO_FN_DV_CLKI, DV_CLKI_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_CLK, DV_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_HSYNC, DV_HSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_VSYNC, DV_VSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D15, DV_D15_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D14, DV_D14_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D13, DV_D13_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D12, DV_D12_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D11, DV_D11_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D10, DV_D10_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D9, DV_D9_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D8, DV_D8_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D7, DV_D7_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D6, DV_D6_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D5, DV_D5_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D4, DV_D4_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D3, DV_D3_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D2, DV_D2_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D1, DV_D1_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D0, DV_D0_MARK),
+
+	/* KEYSC */
+	PINMUX_GPIO(GPIO_FN_KEYIN0, KEYIN0_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN1, KEYIN1_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN2, KEYIN2_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN3, KEYIN3_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN4, KEYIN4_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT0, KEYOUT0_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT1, KEYOUT1_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT2, KEYOUT2_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT3, KEYOUT3_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT4_IN6, KEYOUT4_IN6_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT5_IN5, KEYOUT5_IN5_MARK),
+
+	/* MSIOF0 (PTF) */
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTF_TXD, MSIOF0_PTF_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTF_RXD, MSIOF0_PTF_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTF_MCK, MSIOF0_PTF_MCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTF_TSYNC, MSIOF0_PTF_TSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTF_TSCK, MSIOF0_PTF_TSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTF_RSYNC, MSIOF0_PTF_RSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTF_RSCK, MSIOF0_PTF_RSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTF_SS1, MSIOF0_PTF_SS1_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTF_SS2, MSIOF0_PTF_SS2_MARK),
+
+	/* MSIOF0 (PTT+PTX) */
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTT_TXD, MSIOF0_PTT_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTT_RXD, MSIOF0_PTT_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTX_MCK, MSIOF0_PTX_MCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTT_TSYNC, MSIOF0_PTT_TSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTT_TSCK, MSIOF0_PTT_TSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTT_RSYNC, MSIOF0_PTT_RSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTT_RSCK, MSIOF0_PTT_RSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTT_SS1, MSIOF0_PTT_SS1_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_PTT_SS2, MSIOF0_PTT_SS2_MARK),
+
+	/* MSIOF1 */
+	PINMUX_GPIO(GPIO_FN_MSIOF1_TXD, MSIOF1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_RXD, MSIOF1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_MCK, MSIOF1_MCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_TSYNC, MSIOF1_TSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_TSCK, MSIOF1_TSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_RSYNC, MSIOF1_RSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_RSCK, MSIOF1_RSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_SS1, MSIOF1_SS1_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_SS2, MSIOF1_SS2_MARK),
+
+	/* TSIF */
+	PINMUX_GPIO(GPIO_FN_TS0_SDAT, TS0_SDAT_MARK),
+	PINMUX_GPIO(GPIO_FN_TS0_SCK, TS0_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_TS0_SDEN, TS0_SDEN_MARK),
+	PINMUX_GPIO(GPIO_FN_TS0_SPSYNC, TS0_SPSYNC_MARK),
+
+	/* FLCTL */
+	PINMUX_GPIO(GPIO_FN_FCE, FCE_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF7, NAF7_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF6, NAF6_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF5, NAF5_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF4, NAF4_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF3, NAF3_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF2, NAF2_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF1, NAF1_MARK),
+	PINMUX_GPIO(GPIO_FN_NAF0, NAF0_MARK),
+	PINMUX_GPIO(GPIO_FN_FCDE, FCDE_MARK),
+	PINMUX_GPIO(GPIO_FN_FOE, FOE_MARK),
+	PINMUX_GPIO(GPIO_FN_FSC, FSC_MARK),
+	PINMUX_GPIO(GPIO_FN_FWE, FWE_MARK),
+	PINMUX_GPIO(GPIO_FN_FRB, FRB_MARK),
+
+	/* DMAC */
+	PINMUX_GPIO(GPIO_FN_DACK1, DACK1_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ1, DREQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK0, DACK0_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK),
+
+	/* ADC */
+	PINMUX_GPIO(GPIO_FN_AN3, AN3_MARK),
+	PINMUX_GPIO(GPIO_FN_AN2, AN2_MARK),
+	PINMUX_GPIO(GPIO_FN_AN1, AN1_MARK),
+	PINMUX_GPIO(GPIO_FN_AN0, AN0_MARK),
+	PINMUX_GPIO(GPIO_FN_ADTRG, ADTRG_MARK),
+
+	/* CPG */
+	PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK),
+	PINMUX_GPIO(GPIO_FN_PDSTATUS, PDSTATUS_MARK),
+
+	/* TPU */
+	PINMUX_GPIO(GPIO_FN_TPUTO0, TPUTO0_MARK),
+	PINMUX_GPIO(GPIO_FN_TPUTO1, TPUTO1_MARK),
+	PINMUX_GPIO(GPIO_FN_TPUTO2, TPUTO2_MARK),
+	PINMUX_GPIO(GPIO_FN_TPUTO3, TPUTO3_MARK),
+
+	/* BSC */
+	PINMUX_GPIO(GPIO_FN_D31, D31_MARK),
+	PINMUX_GPIO(GPIO_FN_D30, D30_MARK),
+	PINMUX_GPIO(GPIO_FN_D29, D29_MARK),
+	PINMUX_GPIO(GPIO_FN_D28, D28_MARK),
+	PINMUX_GPIO(GPIO_FN_D27, D27_MARK),
+	PINMUX_GPIO(GPIO_FN_D26, D26_MARK),
+	PINMUX_GPIO(GPIO_FN_D25, D25_MARK),
+	PINMUX_GPIO(GPIO_FN_D24, D24_MARK),
+	PINMUX_GPIO(GPIO_FN_D23, D23_MARK),
+	PINMUX_GPIO(GPIO_FN_D22, D22_MARK),
+	PINMUX_GPIO(GPIO_FN_D21, D21_MARK),
+	PINMUX_GPIO(GPIO_FN_D20, D20_MARK),
+	PINMUX_GPIO(GPIO_FN_D19, D19_MARK),
+	PINMUX_GPIO(GPIO_FN_D18, D18_MARK),
+	PINMUX_GPIO(GPIO_FN_D17, D17_MARK),
+	PINMUX_GPIO(GPIO_FN_D16, D16_MARK),
+	PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK),
+	PINMUX_GPIO(GPIO_FN_WAIT, WAIT_MARK),
+	PINMUX_GPIO(GPIO_FN_BS, BS_MARK),
+	PINMUX_GPIO(GPIO_FN_A25, A25_MARK),
+	PINMUX_GPIO(GPIO_FN_A24, A24_MARK),
+	PINMUX_GPIO(GPIO_FN_A23, A23_MARK),
+	PINMUX_GPIO(GPIO_FN_A22, A22_MARK),
+	PINMUX_GPIO(GPIO_FN_CS6B_CE1B, CS6B_CE1B_MARK),
+	PINMUX_GPIO(GPIO_FN_CS6A_CE2B, CS6A_CE2B_MARK),
+	PINMUX_GPIO(GPIO_FN_CS5B_CE1A, CS5B_CE1A_MARK),
+	PINMUX_GPIO(GPIO_FN_CS5A_CE2A, CS5A_CE2A_MARK),
+	PINMUX_GPIO(GPIO_FN_WE3_ICIOWR, WE3_ICIOWR_MARK),
+	PINMUX_GPIO(GPIO_FN_WE2_ICIORD, WE2_ICIORD_MARK),
+
+	/* ATAPI */
+	PINMUX_GPIO(GPIO_FN_IDED15, IDED15_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED14, IDED14_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED13, IDED13_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED12, IDED12_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED11, IDED11_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED10, IDED10_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED9, IDED9_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED8, IDED8_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED7, IDED7_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED6, IDED6_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED5, IDED5_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED4, IDED4_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED3, IDED3_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED2, IDED2_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED1, IDED1_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED0, IDED0_MARK),
+	PINMUX_GPIO(GPIO_FN_DIRECTION, DIRECTION_MARK),
+	PINMUX_GPIO(GPIO_FN_EXBUF_ENB, EXBUF_ENB_MARK),
+	PINMUX_GPIO(GPIO_FN_IDERST, IDERST_MARK),
+	PINMUX_GPIO(GPIO_FN_IODACK, IODACK_MARK),
+	PINMUX_GPIO(GPIO_FN_IODREQ, IODREQ_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEIORDY, IDEIORDY_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEINT, IDEINT_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEIOWR, IDEIOWR_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEIORD, IDEIORD_MARK),
+	PINMUX_GPIO(GPIO_FN_IDECS1, IDECS1_MARK),
+	PINMUX_GPIO(GPIO_FN_IDECS0, IDECS0_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEA2, IDEA2_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEA1, IDEA1_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEA0, IDEA0_MARK),
+ };
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2) {
+		PTA7_FN, PTA7_OUT, 0, PTA7_IN,
+		PTA6_FN, PTA6_OUT, 0, PTA6_IN,
+		PTA5_FN, PTA5_OUT, 0, PTA5_IN,
+		PTA4_FN, PTA4_OUT, PTA4_IN_PU, PTA4_IN,
+		PTA3_FN, PTA3_OUT, PTA3_IN_PU, PTA3_IN,
+		PTA2_FN, PTA2_OUT, PTA2_IN_PU, PTA2_IN,
+		PTA1_FN, PTA1_OUT, PTA1_IN_PU, PTA1_IN,
+		PTA0_FN, PTA0_OUT, PTA0_IN_PU, PTA0_IN }
+	},
+	{ PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2) {
+		PTB7_FN, PTB7_OUT, 0, PTB7_IN,
+		PTB6_FN, PTB6_OUT, 0, PTB6_IN,
+		PTB5_FN, PTB5_OUT, 0, PTB5_IN,
+		PTB4_FN, PTB4_OUT, 0, PTB4_IN,
+		PTB3_FN, PTB3_OUT, 0, PTB3_IN,
+		PTB2_FN, PTB2_OUT, PTB2_IN_PU, PTB2_IN,
+		PTB1_FN, PTB1_OUT, PTB1_IN_PU, PTB1_IN,
+		PTB0_FN, PTB0_OUT, 0, PTB0_IN }
+	},
+	{ PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2) {
+		PTC7_FN, PTC7_OUT, 0, PTC7_IN,
+		PTC6_FN, PTC6_OUT, 0, PTC6_IN,
+		PTC5_FN, PTC5_OUT, 0, PTC5_IN,
+		PTC4_FN, PTC4_OUT, 0, PTC4_IN,
+		PTC3_FN, PTC3_OUT, 0, PTC3_IN,
+		PTC2_FN, PTC2_OUT, 0, PTC2_IN,
+		PTC1_FN, PTC1_OUT, 0, PTC1_IN,
+		PTC0_FN, PTC0_OUT, 0, PTC0_IN }
+	},
+	{ PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2) {
+		PTD7_FN, PTD7_OUT, 0, PTD7_IN,
+		PTD6_FN, PTD6_OUT, 0, PTD6_IN,
+		PTD5_FN, PTD5_OUT, 0, PTD5_IN,
+		PTD4_FN, PTD4_OUT, 0, PTD4_IN,
+		PTD3_FN, PTD3_OUT, 0, PTD3_IN,
+		PTD2_FN, PTD2_OUT, 0, PTD2_IN,
+		PTD1_FN, PTD1_OUT, 0, PTD1_IN,
+		PTD0_FN, PTD0_OUT, 0, PTD0_IN }
+	},
+	{ PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTE5_FN, PTE5_OUT, 0, PTE5_IN,
+		PTE4_FN, PTE4_OUT, 0, PTE4_IN,
+		PTE3_FN, PTE3_OUT, 0, PTE3_IN,
+		PTE2_FN, PTE2_OUT, 0, PTE2_IN,
+		PTE1_FN, PTE1_OUT, 0, PTE1_IN,
+		PTE0_FN, PTE0_OUT, 0, PTE0_IN }
+	},
+	{ PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2) {
+		PTF7_FN, PTF7_OUT, 0, PTF7_IN,
+		PTF6_FN, PTF6_OUT, 0, PTF6_IN,
+		PTF5_FN, PTF5_OUT, 0, PTF5_IN,
+		PTF4_FN, PTF4_OUT, 0, PTF4_IN,
+		PTF3_FN, PTF3_OUT, 0, PTF3_IN,
+		PTF2_FN, PTF2_OUT, 0, PTF2_IN,
+		PTF1_FN, PTF1_OUT, 0, PTF1_IN,
+		PTF0_FN, PTF0_OUT, 0, PTF0_IN }
+	},
+	{ PINMUX_CFG_REG("PGCR", 0xa405010c, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTG5_FN, PTG5_OUT, 0, 0,
+		PTG4_FN, PTG4_OUT, 0, 0,
+		PTG3_FN, PTG3_OUT, 0, 0,
+		PTG2_FN, PTG2_OUT, 0, 0,
+		PTG1_FN, PTG1_OUT, 0, 0,
+		PTG0_FN, PTG0_OUT, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2) {
+		PTH7_FN, PTH7_OUT, 0, PTH7_IN,
+		PTH6_FN, PTH6_OUT, 0, PTH6_IN,
+		PTH5_FN, PTH5_OUT, 0, PTH5_IN,
+		PTH4_FN, PTH4_OUT, 0, PTH4_IN,
+		PTH3_FN, PTH3_OUT, 0, PTH3_IN,
+		PTH2_FN, PTH2_OUT, 0, PTH2_IN,
+		PTH1_FN, PTH1_OUT, 0, PTH1_IN,
+		PTH0_FN, PTH0_OUT, 0, PTH0_IN }
+	},
+	{ PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2) {
+		PTJ7_FN, PTJ7_OUT, 0, 0,
+		0, 0, 0, 0,
+		PTJ5_FN, PTJ5_OUT, 0, 0,
+		0, 0, 0, 0,
+		PTJ3_FN, PTJ3_OUT, 0, PTJ3_IN,
+		PTJ2_FN, PTJ2_OUT, 0, PTJ2_IN,
+		PTJ1_FN, PTJ1_OUT, 0, PTJ1_IN,
+		PTJ0_FN, PTJ0_OUT, 0, PTJ0_IN }
+	},
+	{ PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2) {
+		PTK7_FN, PTK7_OUT, 0, PTK7_IN,
+		PTK6_FN, PTK6_OUT, 0, PTK6_IN,
+		PTK5_FN, PTK5_OUT, 0, PTK5_IN,
+		PTK4_FN, PTK4_OUT, 0, PTK4_IN,
+		PTK3_FN, PTK3_OUT, 0, PTK3_IN,
+		PTK2_FN, PTK2_OUT, 0, PTK2_IN,
+		PTK1_FN, PTK1_OUT, 0, PTK1_IN,
+		PTK0_FN, PTK0_OUT, 0, PTK0_IN }
+	},
+	{ PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2) {
+		PTL7_FN, PTL7_OUT, 0, PTL7_IN,
+		PTL6_FN, PTL6_OUT, 0, PTL6_IN,
+		PTL5_FN, PTL5_OUT, 0, PTL5_IN,
+		PTL4_FN, PTL4_OUT, 0, PTL4_IN,
+		PTL3_FN, PTL3_OUT, 0, PTL3_IN,
+		PTL2_FN, PTL2_OUT, 0, PTL2_IN,
+		PTL1_FN, PTL1_OUT, 0, PTL1_IN,
+		PTL0_FN, PTL0_OUT, 0, PTL0_IN }
+	},
+	{ PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2) {
+		PTM7_FN, PTM7_OUT, 0, PTM7_IN,
+		PTM6_FN, PTM6_OUT, 0, PTM6_IN,
+		PTM5_FN, PTM5_OUT, 0, PTM5_IN,
+		PTM4_FN, PTM4_OUT, 0, PTM4_IN,
+		PTM3_FN, PTM3_OUT, 0, PTM3_IN,
+		PTM2_FN, PTM2_OUT, 0, PTM2_IN,
+		PTM1_FN, PTM1_OUT, 0, PTM1_IN,
+		PTM0_FN, PTM0_OUT, 0, PTM0_IN }
+	},
+	{ PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2) {
+		PTN7_FN, PTN7_OUT, 0, PTN7_IN,
+		PTN6_FN, PTN6_OUT, 0, PTN6_IN,
+		PTN5_FN, PTN5_OUT, 0, PTN5_IN,
+		PTN4_FN, PTN4_OUT, 0, PTN4_IN,
+		PTN3_FN, PTN3_OUT, 0, PTN3_IN,
+		PTN2_FN, PTN2_OUT, 0, PTN2_IN,
+		PTN1_FN, PTN1_OUT, 0, PTN1_IN,
+		PTN0_FN, PTN0_OUT, 0, PTN0_IN }
+	},
+	{ PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTQ3_FN, 0, 0, PTQ3_IN,
+		PTQ2_FN, 0, 0, PTQ2_IN,
+		PTQ1_FN, 0, 0, PTQ1_IN,
+		PTQ0_FN, 0, 0, PTQ0_IN }
+	},
+	{ PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2) {
+		PTR7_FN, PTR7_OUT, 0, PTR7_IN,
+		PTR6_FN, PTR6_OUT, 0, PTR6_IN,
+		PTR5_FN, PTR5_OUT, 0, PTR5_IN,
+		PTR4_FN, PTR4_OUT, 0, PTR4_IN,
+		PTR3_FN, 0, 0, PTR3_IN,
+		PTR2_FN, 0, PTR2_IN_PU, PTR2_IN,
+		PTR1_FN, PTR1_OUT, 0, PTR1_IN,
+		PTR0_FN, PTR0_OUT, 0, PTR0_IN }
+	},
+	{ PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2) {
+		PTS7_FN, PTS7_OUT, 0, PTS7_IN,
+		PTS6_FN, PTS6_OUT, 0, PTS6_IN,
+		PTS5_FN, PTS5_OUT, 0, PTS5_IN,
+		PTS4_FN, PTS4_OUT, 0, PTS4_IN,
+		PTS3_FN, PTS3_OUT, 0, PTS3_IN,
+		PTS2_FN, PTS2_OUT, 0, PTS2_IN,
+		PTS1_FN, PTS1_OUT, 0, PTS1_IN,
+		PTS0_FN, PTS0_OUT, 0, PTS0_IN }
+	},
+	{ PINMUX_CFG_REG("PTCR", 0xa4050140, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTT5_FN, PTT5_OUT, 0, PTT5_IN,
+		PTT4_FN, PTT4_OUT, 0, PTT4_IN,
+		PTT3_FN, PTT3_OUT, 0, PTT3_IN,
+		PTT2_FN, PTT2_OUT, 0, PTT2_IN,
+		PTT1_FN, PTT1_OUT, 0, PTT1_IN,
+		PTT0_FN, PTT0_OUT, 0, PTT0_IN }
+	},
+	{ PINMUX_CFG_REG("PUCR", 0xa4050142, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTU5_FN, PTU5_OUT, 0, PTU5_IN,
+		PTU4_FN, PTU4_OUT, 0, PTU4_IN,
+		PTU3_FN, PTU3_OUT, 0, PTU3_IN,
+		PTU2_FN, PTU2_OUT, 0, PTU2_IN,
+		PTU1_FN, PTU1_OUT, 0, PTU1_IN,
+		PTU0_FN, PTU0_OUT, 0, PTU0_IN }
+	},
+	{ PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2) {
+		PTV7_FN, PTV7_OUT, 0, PTV7_IN,
+		PTV6_FN, PTV6_OUT, 0, PTV6_IN,
+		PTV5_FN, PTV5_OUT, 0, PTV5_IN,
+		PTV4_FN, PTV4_OUT, 0, PTV4_IN,
+		PTV3_FN, PTV3_OUT, 0, PTV3_IN,
+		PTV2_FN, PTV2_OUT, 0, PTV2_IN,
+		PTV1_FN, PTV1_OUT, 0, PTV1_IN,
+		PTV0_FN, PTV0_OUT, 0, PTV0_IN }
+	},
+	{ PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2) {
+		PTW7_FN, PTW7_OUT, 0, PTW7_IN,
+		PTW6_FN, PTW6_OUT, 0, PTW6_IN,
+		PTW5_FN, PTW5_OUT, 0, PTW5_IN,
+		PTW4_FN, PTW4_OUT, 0, PTW4_IN,
+		PTW3_FN, PTW3_OUT, 0, PTW3_IN,
+		PTW2_FN, PTW2_OUT, 0, PTW2_IN,
+		PTW1_FN, PTW1_OUT, 0, PTW1_IN,
+		PTW0_FN, PTW0_OUT, 0, PTW0_IN }
+	},
+	{ PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2) {
+		PTX7_FN, PTX7_OUT, 0, PTX7_IN,
+		PTX6_FN, PTX6_OUT, 0, PTX6_IN,
+		PTX5_FN, PTX5_OUT, 0, PTX5_IN,
+		PTX4_FN, PTX4_OUT, 0, PTX4_IN,
+		PTX3_FN, PTX3_OUT, 0, PTX3_IN,
+		PTX2_FN, PTX2_OUT, 0, PTX2_IN,
+		PTX1_FN, PTX1_OUT, 0, PTX1_IN,
+		PTX0_FN, PTX0_OUT, 0, PTX0_IN }
+	},
+	{ PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2) {
+		PTY7_FN, PTY7_OUT, 0, PTY7_IN,
+		PTY6_FN, PTY6_OUT, 0, PTY6_IN,
+		PTY5_FN, PTY5_OUT, 0, PTY5_IN,
+		PTY4_FN, PTY4_OUT, 0, PTY4_IN,
+		PTY3_FN, PTY3_OUT, 0, PTY3_IN,
+		PTY2_FN, PTY2_OUT, 0, PTY2_IN,
+		PTY1_FN, PTY1_OUT, 0, PTY1_IN,
+		PTY0_FN, PTY0_OUT, 0, PTY0_IN }
+	},
+	{ PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2) {
+		PTZ7_FN, PTZ7_OUT, 0, PTZ7_IN,
+		PTZ6_FN, PTZ6_OUT, 0, PTZ6_IN,
+		PTZ5_FN, PTZ5_OUT, 0, PTZ5_IN,
+		PTZ4_FN, PTZ4_OUT, 0, PTZ4_IN,
+		PTZ3_FN, PTZ3_OUT, 0, PTZ3_IN,
+		PTZ2_FN, PTZ2_OUT, 0, PTZ2_IN,
+		PTZ1_FN, PTZ1_OUT, 0, PTZ1_IN,
+		PTZ0_FN, PTZ0_OUT, 0, PTZ0_IN }
+	},
+	{ PINMUX_CFG_REG("PSELA", 0xa405014e, 16, 2) {
+		PSA15_PSA14_FN1, PSA15_PSA14_FN2, 0, 0,
+		PSA13_PSA12_FN1, PSA13_PSA12_FN2, 0, 0,
+		PSA11_PSA10_FN1, PSA11_PSA10_FN2, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PSA5_PSA4_FN1, PSA5_PSA4_FN2, PSA5_PSA4_FN3, 0,
+		PSA3_PSA2_FN1, PSA3_PSA2_FN2, 0, 0,
+		0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 2) {
+		PSB15_PSB14_FN1, PSB15_PSB14_FN2, 0, 0,
+		PSB13_PSB12_LCDC_RGB, PSB13_PSB12_LCDC_SYS, 0, 0,
+		0, 0, 0, 0,
+		PSB9_PSB8_FN1, PSB9_PSB8_FN2, PSB9_PSB8_FN3, 0,
+		PSB7_PSB6_FN1, PSB7_PSB6_FN2, 0, 0,
+		PSB5_PSB4_FN1, PSB5_PSB4_FN2, 0, 0,
+		PSB3_PSB2_FN1, PSB3_PSB2_FN2, 0, 0,
+		0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PSELC", 0xa4050152, 16, 2) {
+		PSC15_PSC14_FN1, PSC15_PSC14_FN2, 0, 0,
+		PSC13_PSC12_FN1, PSC13_PSC12_FN2, 0, 0,
+		PSC11_PSC10_FN1, PSC11_PSC10_FN2, PSC11_PSC10_FN3, 0,
+		PSC9_PSC8_FN1, PSC9_PSC8_FN2, 0, 0,
+		PSC7_PSC6_FN1, PSC7_PSC6_FN2, PSC7_PSC6_FN3, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 2) {
+		PSD15_PSD14_FN1, PSD15_PSD14_FN2, 0, 0,
+		PSD13_PSD12_FN1, PSD13_PSD12_FN2, 0, 0,
+		PSD11_PSD10_FN1, PSD11_PSD10_FN2, PSD11_PSD10_FN3, 0,
+		PSD9_PSD8_FN1, PSD9_PSD8_FN2, 0, 0,
+		PSD7_PSD6_FN1, PSD7_PSD6_FN2, 0, 0,
+		PSD5_PSD4_FN1, PSD5_PSD4_FN2, 0, 0,
+		PSD3_PSD2_FN1, PSD3_PSD2_FN2, 0, 0,
+		PSD1_PSD0_FN1, PSD1_PSD0_FN2, 0, 0 }
+	},
+	{}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PADR", 0xa4050120, 8) {
+		PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+		PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA }
+	},
+	{ PINMUX_DATA_REG("PBDR", 0xa4050122, 8) {
+		PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+		PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA }
+	},
+	{ PINMUX_DATA_REG("PCDR", 0xa4050124, 8) {
+		PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+		PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA }
+	},
+	{ PINMUX_DATA_REG("PDDR", 0xa4050126, 8) {
+		PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+		PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA }
+	},
+	{ PINMUX_DATA_REG("PEDR", 0xa4050128, 8) {
+		0, 0, PTE5_DATA, PTE4_DATA,
+		PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA }
+	},
+	{ PINMUX_DATA_REG("PFDR", 0xa405012a, 8) {
+		PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+		PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA }
+	},
+	{ PINMUX_DATA_REG("PGDR", 0xa405012c, 8) {
+		0, 0, PTG5_DATA, PTG4_DATA,
+		PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA }
+	},
+	{ PINMUX_DATA_REG("PHDR", 0xa405012e, 8) {
+		PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+		PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA }
+	},
+	{ PINMUX_DATA_REG("PJDR", 0xa4050130, 8) {
+		PTJ7_DATA, 0, PTJ5_DATA, 0,
+		PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PKDR", 0xa4050132, 8) {
+		PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+		PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA }
+	},
+	{ PINMUX_DATA_REG("PLDR", 0xa4050134, 8) {
+		PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+		PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA }
+	},
+	{ PINMUX_DATA_REG("PMDR", 0xa4050136, 8) {
+		PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+		PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA }
+	},
+	{ PINMUX_DATA_REG("PNDR", 0xa4050138, 8) {
+		PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+		PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA }
+	},
+	{ PINMUX_DATA_REG("PQDR", 0xa405013a, 8) {
+		0, 0, 0, 0,
+		PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PRDR", 0xa405013c, 8) {
+		PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+		PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA }
+	},
+	{ PINMUX_DATA_REG("PSDR", 0xa405013e, 8) {
+		PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
+		PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA }
+	},
+	{ PINMUX_DATA_REG("PTDR", 0xa4050160, 8) {
+		0, 0, PTT5_DATA, PTT4_DATA,
+		PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PUDR", 0xa4050162, 8) {
+		0, 0, PTU5_DATA, PTU4_DATA,
+		PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA }
+	},
+	{ PINMUX_DATA_REG("PVDR", 0xa4050164, 8) {
+		PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+		PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA }
+	},
+	{ PINMUX_DATA_REG("PWDR", 0xa4050166, 8) {
+		PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+		PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA }
+	},
+	{ PINMUX_DATA_REG("PXDR", 0xa4050168, 8) {
+		PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+		PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA }
+	},
+	{ PINMUX_DATA_REG("PYDR", 0xa405016a, 8) {
+		PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+		PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA }
+	},
+	{ PINMUX_DATA_REG("PZDR", 0xa405016c, 8) {
+		PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+		PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7723_pinmux_info = {
+	.name = "sh7723_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PTA7,
+	.last_gpio = GPIO_FN_IDEA0,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return register_pinmux(&sh7723_pinmux_info);
+}
+
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
new file mode 100644
index 0000000..5ebc25f
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
@@ -0,0 +1,1310 @@
+/*
+ * SH7785 Pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7785.h>
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
+	PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
+	PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
+	PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
+	PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
+	PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
+	PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
+	PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
+	PE5_DATA, PE4_DATA, PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
+	PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
+	PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
+	PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
+	PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
+	PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
+	PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
+	PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
+	PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
+	PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
+	PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA,
+	PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA,
+	PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA,
+	PM1_DATA, PM0_DATA,
+	PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA,
+	PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA,
+	PP5_DATA, PP4_DATA, PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA,
+	PQ4_DATA, PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA,
+	PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA,
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PA7_IN, PA6_IN, PA5_IN, PA4_IN,
+	PA3_IN, PA2_IN, PA1_IN, PA0_IN,
+	PB7_IN, PB6_IN, PB5_IN, PB4_IN,
+	PB3_IN, PB2_IN, PB1_IN, PB0_IN,
+	PC7_IN, PC6_IN, PC5_IN, PC4_IN,
+	PC3_IN, PC2_IN, PC1_IN, PC0_IN,
+	PD7_IN, PD6_IN, PD5_IN, PD4_IN,
+	PD3_IN, PD2_IN, PD1_IN, PD0_IN,
+	PE5_IN, PE4_IN, PE3_IN, PE2_IN, PE1_IN, PE0_IN,
+	PF7_IN, PF6_IN, PF5_IN, PF4_IN,
+	PF3_IN, PF2_IN, PF1_IN, PF0_IN,
+	PG7_IN, PG6_IN, PG5_IN, PG4_IN,
+	PG3_IN, PG2_IN, PG1_IN, PG0_IN,
+	PH7_IN, PH6_IN, PH5_IN, PH4_IN,
+	PH3_IN, PH2_IN, PH1_IN, PH0_IN,
+	PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
+	PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
+	PK7_IN, PK6_IN, PK5_IN, PK4_IN,
+	PK3_IN, PK2_IN, PK1_IN, PK0_IN,
+	PL7_IN, PL6_IN, PL5_IN, PL4_IN,
+	PL3_IN, PL2_IN, PL1_IN, PL0_IN,
+	PM1_IN, PM0_IN,
+	PN7_IN, PN6_IN, PN5_IN, PN4_IN,
+	PN3_IN, PN2_IN, PN1_IN, PN0_IN,
+	PP5_IN, PP4_IN, PP3_IN, PP2_IN, PP1_IN, PP0_IN,
+	PQ4_IN, PQ3_IN, PQ2_IN, PQ1_IN, PQ0_IN,
+	PR3_IN, PR2_IN, PR1_IN, PR0_IN,
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PA7_IN_PU, PA6_IN_PU, PA5_IN_PU, PA4_IN_PU,
+	PA3_IN_PU, PA2_IN_PU, PA1_IN_PU, PA0_IN_PU,
+	PB7_IN_PU, PB6_IN_PU, PB5_IN_PU, PB4_IN_PU,
+	PB3_IN_PU, PB2_IN_PU, PB1_IN_PU, PB0_IN_PU,
+	PC7_IN_PU, PC6_IN_PU, PC5_IN_PU, PC4_IN_PU,
+	PC3_IN_PU, PC2_IN_PU, PC1_IN_PU, PC0_IN_PU,
+	PD7_IN_PU, PD6_IN_PU, PD5_IN_PU, PD4_IN_PU,
+	PD3_IN_PU, PD2_IN_PU, PD1_IN_PU, PD0_IN_PU,
+	PE5_IN_PU, PE4_IN_PU, PE3_IN_PU, PE2_IN_PU, PE1_IN_PU, PE0_IN_PU,
+	PF7_IN_PU, PF6_IN_PU, PF5_IN_PU, PF4_IN_PU,
+	PF3_IN_PU, PF2_IN_PU, PF1_IN_PU, PF0_IN_PU,
+	PG7_IN_PU, PG6_IN_PU, PG5_IN_PU, PG4_IN_PU,
+	PG3_IN_PU, PG2_IN_PU, PG1_IN_PU, PG0_IN_PU,
+	PH7_IN_PU, PH6_IN_PU, PH5_IN_PU, PH4_IN_PU,
+	PH3_IN_PU, PH2_IN_PU, PH1_IN_PU, PH0_IN_PU,
+	PJ7_IN_PU, PJ6_IN_PU, PJ5_IN_PU, PJ4_IN_PU,
+	PJ3_IN_PU, PJ2_IN_PU, PJ1_IN_PU, PJ0_IN_PU,
+	PK7_IN_PU, PK6_IN_PU, PK5_IN_PU, PK4_IN_PU,
+	PK3_IN_PU, PK2_IN_PU, PK1_IN_PU, PK0_IN_PU,
+	PL7_IN_PU, PL6_IN_PU, PL5_IN_PU, PL4_IN_PU,
+	PL3_IN_PU, PL2_IN_PU, PL1_IN_PU, PL0_IN_PU,
+	PM1_IN_PU, PM0_IN_PU,
+	PN7_IN_PU, PN6_IN_PU, PN5_IN_PU, PN4_IN_PU,
+	PN3_IN_PU, PN2_IN_PU, PN1_IN_PU, PN0_IN_PU,
+	PP5_IN_PU, PP4_IN_PU, PP3_IN_PU, PP2_IN_PU, PP1_IN_PU, PP0_IN_PU,
+	PQ4_IN_PU, PQ3_IN_PU, PQ2_IN_PU, PQ1_IN_PU, PQ0_IN_PU,
+	PR3_IN_PU, PR2_IN_PU, PR1_IN_PU, PR0_IN_PU,
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
+	PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
+	PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
+	PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
+	PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
+	PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
+	PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
+	PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
+	PE5_OUT, PE4_OUT, PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
+	PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
+	PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
+	PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
+	PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
+	PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT,
+	PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
+	PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
+	PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
+	PK7_OUT, PK6_OUT, PK5_OUT, PK4_OUT,
+	PK3_OUT, PK2_OUT, PK1_OUT, PK0_OUT,
+	PL7_OUT, PL6_OUT, PL5_OUT, PL4_OUT,
+	PL3_OUT, PL2_OUT, PL1_OUT, PL0_OUT,
+	PM1_OUT, PM0_OUT,
+	PN7_OUT, PN6_OUT, PN5_OUT, PN4_OUT,
+	PN3_OUT, PN2_OUT, PN1_OUT, PN0_OUT,
+	PP5_OUT, PP4_OUT, PP3_OUT, PP2_OUT, PP1_OUT, PP0_OUT,
+	PQ4_OUT, PQ3_OUT, PQ2_OUT, PQ1_OUT, PQ0_OUT,
+	PR3_OUT, PR2_OUT, PR1_OUT, PR0_OUT,
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PA7_FN, PA6_FN, PA5_FN, PA4_FN,
+	PA3_FN, PA2_FN, PA1_FN, PA0_FN,
+	PB7_FN, PB6_FN, PB5_FN, PB4_FN,
+	PB3_FN, PB2_FN, PB1_FN, PB0_FN,
+	PC7_FN, PC6_FN, PC5_FN, PC4_FN,
+	PC3_FN, PC2_FN, PC1_FN, PC0_FN,
+	PD7_FN, PD6_FN, PD5_FN, PD4_FN,
+	PD3_FN, PD2_FN, PD1_FN, PD0_FN,
+	PE5_FN, PE4_FN, PE3_FN, PE2_FN, PE1_FN, PE0_FN,
+	PF7_FN, PF6_FN, PF5_FN, PF4_FN,
+	PF3_FN, PF2_FN, PF1_FN, PF0_FN,
+	PG7_FN, PG6_FN, PG5_FN, PG4_FN,
+	PG3_FN, PG2_FN, PG1_FN, PG0_FN,
+	PH7_FN, PH6_FN, PH5_FN, PH4_FN,
+	PH3_FN, PH2_FN, PH1_FN, PH0_FN,
+	PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN,
+	PJ3_FN, PJ2_FN, PJ1_FN, PJ0_FN,
+	PK7_FN, PK6_FN, PK5_FN, PK4_FN,
+	PK3_FN, PK2_FN, PK1_FN, PK0_FN,
+	PL7_FN, PL6_FN, PL5_FN, PL4_FN,
+	PL3_FN, PL2_FN, PL1_FN, PL0_FN,
+	PM1_FN, PM0_FN,
+	PN7_FN, PN6_FN, PN5_FN, PN4_FN,
+	PN3_FN, PN2_FN, PN1_FN, PN0_FN,
+	PP5_FN, PP4_FN, PP3_FN, PP2_FN, PP1_FN, PP0_FN,
+	PQ4_FN, PQ3_FN, PQ2_FN, PQ1_FN, PQ0_FN,
+	PR3_FN, PR2_FN, PR1_FN, PR0_FN,
+	P1MSEL15_0, P1MSEL15_1,
+	P1MSEL14_0, P1MSEL14_1,
+	P1MSEL13_0, P1MSEL13_1,
+	P1MSEL12_0, P1MSEL12_1,
+	P1MSEL11_0, P1MSEL11_1,
+	P1MSEL10_0, P1MSEL10_1,
+	P1MSEL9_0, P1MSEL9_1,
+	P1MSEL8_0, P1MSEL8_1,
+	P1MSEL7_0, P1MSEL7_1,
+	P1MSEL6_0, P1MSEL6_1,
+	P1MSEL5_0,
+	P1MSEL4_0, P1MSEL4_1,
+	P1MSEL3_0, P1MSEL3_1,
+	P1MSEL2_0, P1MSEL2_1,
+	P1MSEL1_0, P1MSEL1_1,
+	P1MSEL0_0, P1MSEL0_1,
+	P2MSEL2_0, P2MSEL2_1,
+	P2MSEL1_0, P2MSEL1_1,
+	P2MSEL0_0, P2MSEL0_1,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	D63_AD31_MARK,
+	D62_AD30_MARK,
+	D61_AD29_MARK,
+	D60_AD28_MARK,
+	D59_AD27_MARK,
+	D58_AD26_MARK,
+	D57_AD25_MARK,
+	D56_AD24_MARK,
+	D55_AD23_MARK,
+	D54_AD22_MARK,
+	D53_AD21_MARK,
+	D52_AD20_MARK,
+	D51_AD19_MARK,
+	D50_AD18_MARK,
+	D49_AD17_DB5_MARK,
+	D48_AD16_DB4_MARK,
+	D47_AD15_DB3_MARK,
+	D46_AD14_DB2_MARK,
+	D45_AD13_DB1_MARK,
+	D44_AD12_DB0_MARK,
+	D43_AD11_DG5_MARK,
+	D42_AD10_DG4_MARK,
+	D41_AD9_DG3_MARK,
+	D40_AD8_DG2_MARK,
+	D39_AD7_DG1_MARK,
+	D38_AD6_DG0_MARK,
+	D37_AD5_DR5_MARK,
+	D36_AD4_DR4_MARK,
+	D35_AD3_DR3_MARK,
+	D34_AD2_DR2_MARK,
+	D33_AD1_DR1_MARK,
+	D32_AD0_DR0_MARK,
+	REQ1_MARK,
+	REQ2_MARK,
+	REQ3_MARK,
+	GNT1_MARK,
+	GNT2_MARK,
+	GNT3_MARK,
+	MMCCLK_MARK,
+	D31_MARK,
+	D30_MARK,
+	D29_MARK,
+	D28_MARK,
+	D27_MARK,
+	D26_MARK,
+	D25_MARK,
+	D24_MARK,
+	D23_MARK,
+	D22_MARK,
+	D21_MARK,
+	D20_MARK,
+	D19_MARK,
+	D18_MARK,
+	D17_MARK,
+	D16_MARK,
+	SCIF1_SCK_MARK,
+	SCIF1_RXD_MARK,
+	SCIF1_TXD_MARK,
+	SCIF0_CTS_MARK,
+	INTD_MARK,
+	FCE_MARK,
+	SCIF0_RTS_MARK,
+	HSPI_CS_MARK,
+	FSE_MARK,
+	SCIF0_SCK_MARK,
+	HSPI_CLK_MARK,
+	FRE_MARK,
+	SCIF0_RXD_MARK,
+	HSPI_RX_MARK,
+	FRB_MARK,
+	SCIF0_TXD_MARK,
+	HSPI_TX_MARK,
+	FWE_MARK,
+	SCIF5_TXD_MARK,
+	HAC1_SYNC_MARK,
+	SSI1_WS_MARK,
+	SIOF_TXD_PJ_MARK,
+	HAC0_SDOUT_MARK,
+	SSI0_SDATA_MARK,
+	SIOF_RXD_PJ_MARK,
+	HAC0_SDIN_MARK,
+	SSI0_SCK_MARK,
+	SIOF_SYNC_PJ_MARK,
+	HAC0_SYNC_MARK,
+	SSI0_WS_MARK,
+	SIOF_MCLK_PJ_MARK,
+	HAC_RES_MARK,
+	SIOF_SCK_PJ_MARK,
+	HAC0_BITCLK_MARK,
+	SSI0_CLK_MARK,
+	HAC1_BITCLK_MARK,
+	SSI1_CLK_MARK,
+	TCLK_MARK,
+	IOIS16_MARK,
+	STATUS0_MARK,
+	DRAK0_PK3_MARK,
+	STATUS1_MARK,
+	DRAK1_PK2_MARK,
+	DACK2_MARK,
+	SCIF2_TXD_MARK,
+	MMCCMD_MARK,
+	SIOF_TXD_PK_MARK,
+	DACK3_MARK,
+	SCIF2_SCK_MARK,
+	MMCDAT_MARK,
+	SIOF_SCK_PK_MARK,
+	DREQ0_MARK,
+	DREQ1_MARK,
+	DRAK0_PK1_MARK,
+	DRAK1_PK0_MARK,
+	DREQ2_MARK,
+	INTB_MARK,
+	DREQ3_MARK,
+	INTC_MARK,
+	DRAK2_MARK,
+	CE2A_MARK,
+	IRL4_MARK,
+	FD4_MARK,
+	IRL5_MARK,
+	FD5_MARK,
+	IRL6_MARK,
+	FD6_MARK,
+	IRL7_MARK,
+	FD7_MARK,
+	DRAK3_MARK,
+	CE2B_MARK,
+	BREQ_BSACK_MARK,
+	BACK_BSREQ_MARK,
+	SCIF5_RXD_MARK,
+	HAC1_SDIN_MARK,
+	SSI1_SCK_MARK,
+	SCIF5_SCK_MARK,
+	HAC1_SDOUT_MARK,
+	SSI1_SDATA_MARK,
+	SCIF3_TXD_MARK,
+	FCLE_MARK,
+	SCIF3_RXD_MARK,
+	FALE_MARK,
+	SCIF3_SCK_MARK,
+	FD0_MARK,
+	SCIF4_TXD_MARK,
+	FD1_MARK,
+	SCIF4_RXD_MARK,
+	FD2_MARK,
+	SCIF4_SCK_MARK,
+	FD3_MARK,
+	DEVSEL_DCLKOUT_MARK,
+	STOP_CDE_MARK,
+	LOCK_ODDF_MARK,
+	TRDY_DISPL_MARK,
+	IRDY_HSYNC_MARK,
+	PCIFRAME_VSYNC_MARK,
+	INTA_MARK,
+	GNT0_GNTIN_MARK,
+	REQ0_REQOUT_MARK,
+	PERR_MARK,
+	SERR_MARK,
+	WE7_CBE3_MARK,
+	WE6_CBE2_MARK,
+	WE5_CBE1_MARK,
+	WE4_CBE0_MARK,
+	SCIF2_RXD_MARK,
+	SIOF_RXD_MARK,
+	MRESETOUT_MARK,
+	IRQOUT_MARK,
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+
+	/* PA GPIO */
+	PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT, PA7_IN_PU),
+	PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT, PA6_IN_PU),
+	PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT, PA5_IN_PU),
+	PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT, PA4_IN_PU),
+	PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT, PA3_IN_PU),
+	PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT, PA2_IN_PU),
+	PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT, PA1_IN_PU),
+	PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT, PA0_IN_PU),
+
+	/* PB GPIO */
+	PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT, PB7_IN_PU),
+	PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT, PB6_IN_PU),
+	PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT, PB5_IN_PU),
+	PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT, PB4_IN_PU),
+	PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT, PB3_IN_PU),
+	PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT, PB2_IN_PU),
+	PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT, PB1_IN_PU),
+	PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT, PB0_IN_PU),
+
+	/* PC GPIO */
+	PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT, PC7_IN_PU),
+	PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT, PC6_IN_PU),
+	PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT, PC5_IN_PU),
+	PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT, PC4_IN_PU),
+	PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT, PC3_IN_PU),
+	PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT, PC2_IN_PU),
+	PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT, PC1_IN_PU),
+	PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT, PC0_IN_PU),
+
+	/* PD GPIO */
+	PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT, PD7_IN_PU),
+	PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT, PD6_IN_PU),
+	PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT, PD5_IN_PU),
+	PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT, PD4_IN_PU),
+	PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT, PD3_IN_PU),
+	PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT, PD2_IN_PU),
+	PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT, PD1_IN_PU),
+	PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT, PD0_IN_PU),
+
+	/* PE GPIO */
+	PINMUX_DATA(PE5_DATA, PE5_IN, PE5_OUT, PE5_IN_PU),
+	PINMUX_DATA(PE4_DATA, PE4_IN, PE4_OUT, PE4_IN_PU),
+	PINMUX_DATA(PE3_DATA, PE3_IN, PE3_OUT, PE3_IN_PU),
+	PINMUX_DATA(PE2_DATA, PE2_IN, PE2_OUT, PE2_IN_PU),
+	PINMUX_DATA(PE1_DATA, PE1_IN, PE1_OUT, PE1_IN_PU),
+	PINMUX_DATA(PE0_DATA, PE0_IN, PE0_OUT, PE0_IN_PU),
+
+	/* PF GPIO */
+	PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT, PF7_IN_PU),
+	PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT, PF6_IN_PU),
+	PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT, PF5_IN_PU),
+	PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT, PF4_IN_PU),
+	PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT, PF3_IN_PU),
+	PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT, PF2_IN_PU),
+	PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT, PF1_IN_PU),
+	PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT, PF0_IN_PU),
+
+	/* PG GPIO */
+	PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT, PG7_IN_PU),
+	PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT, PG6_IN_PU),
+	PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT, PG5_IN_PU),
+	PINMUX_DATA(PG4_DATA, PG4_IN, PG4_OUT, PG4_IN_PU),
+	PINMUX_DATA(PG3_DATA, PG3_IN, PG3_OUT, PG3_IN_PU),
+	PINMUX_DATA(PG2_DATA, PG2_IN, PG2_OUT, PG2_IN_PU),
+	PINMUX_DATA(PG1_DATA, PG1_IN, PG1_OUT, PG1_IN_PU),
+	PINMUX_DATA(PG0_DATA, PG0_IN, PG0_OUT, PG0_IN_PU),
+
+	/* PH GPIO */
+	PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT, PH7_IN_PU),
+	PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT, PH6_IN_PU),
+	PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT, PH5_IN_PU),
+	PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT, PH4_IN_PU),
+	PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT, PH3_IN_PU),
+	PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT, PH2_IN_PU),
+	PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT, PH1_IN_PU),
+	PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT, PH0_IN_PU),
+
+	/* PJ GPIO */
+	PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT, PJ7_IN_PU),
+	PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT, PJ6_IN_PU),
+	PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT, PJ5_IN_PU),
+	PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT, PJ4_IN_PU),
+	PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT, PJ3_IN_PU),
+	PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT, PJ2_IN_PU),
+	PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT, PJ1_IN_PU),
+	PINMUX_DATA(PJ0_DATA, PJ0_IN, PJ0_OUT, PJ0_IN_PU),
+
+	/* PK GPIO */
+	PINMUX_DATA(PK7_DATA, PK7_IN, PK7_OUT, PK7_IN_PU),
+	PINMUX_DATA(PK6_DATA, PK6_IN, PK6_OUT, PK6_IN_PU),
+	PINMUX_DATA(PK5_DATA, PK5_IN, PK5_OUT, PK5_IN_PU),
+	PINMUX_DATA(PK4_DATA, PK4_IN, PK4_OUT, PK4_IN_PU),
+	PINMUX_DATA(PK3_DATA, PK3_IN, PK3_OUT, PK3_IN_PU),
+	PINMUX_DATA(PK2_DATA, PK2_IN, PK2_OUT, PK2_IN_PU),
+	PINMUX_DATA(PK1_DATA, PK1_IN, PK1_OUT, PK1_IN_PU),
+	PINMUX_DATA(PK0_DATA, PK0_IN, PK0_OUT, PK0_IN_PU),
+
+	/* PL GPIO */
+	PINMUX_DATA(PL7_DATA, PL7_IN, PL7_OUT, PL7_IN_PU),
+	PINMUX_DATA(PL6_DATA, PL6_IN, PL6_OUT, PL6_IN_PU),
+	PINMUX_DATA(PL5_DATA, PL5_IN, PL5_OUT, PL5_IN_PU),
+	PINMUX_DATA(PL4_DATA, PL4_IN, PL4_OUT, PL4_IN_PU),
+	PINMUX_DATA(PL3_DATA, PL3_IN, PL3_OUT, PL3_IN_PU),
+	PINMUX_DATA(PL2_DATA, PL2_IN, PL2_OUT, PL2_IN_PU),
+	PINMUX_DATA(PL1_DATA, PL1_IN, PL1_OUT, PL1_IN_PU),
+	PINMUX_DATA(PL0_DATA, PL0_IN, PL0_OUT, PL0_IN_PU),
+
+	/* PM GPIO */
+	PINMUX_DATA(PM1_DATA, PM1_IN, PM1_OUT, PM1_IN_PU),
+	PINMUX_DATA(PM0_DATA, PM0_IN, PM0_OUT, PM0_IN_PU),
+
+	/* PN GPIO */
+	PINMUX_DATA(PN7_DATA, PN7_IN, PN7_OUT, PN7_IN_PU),
+	PINMUX_DATA(PN6_DATA, PN6_IN, PN6_OUT, PN6_IN_PU),
+	PINMUX_DATA(PN5_DATA, PN5_IN, PN5_OUT, PN5_IN_PU),
+	PINMUX_DATA(PN4_DATA, PN4_IN, PN4_OUT, PN4_IN_PU),
+	PINMUX_DATA(PN3_DATA, PN3_IN, PN3_OUT, PN3_IN_PU),
+	PINMUX_DATA(PN2_DATA, PN2_IN, PN2_OUT, PN2_IN_PU),
+	PINMUX_DATA(PN1_DATA, PN1_IN, PN1_OUT, PN1_IN_PU),
+	PINMUX_DATA(PN0_DATA, PN0_IN, PN0_OUT, PN0_IN_PU),
+
+	/* PP GPIO */
+	PINMUX_DATA(PP5_DATA, PP5_IN, PP5_OUT, PP5_IN_PU),
+	PINMUX_DATA(PP4_DATA, PP4_IN, PP4_OUT, PP4_IN_PU),
+	PINMUX_DATA(PP3_DATA, PP3_IN, PP3_OUT, PP3_IN_PU),
+	PINMUX_DATA(PP2_DATA, PP2_IN, PP2_OUT, PP2_IN_PU),
+	PINMUX_DATA(PP1_DATA, PP1_IN, PP1_OUT, PP1_IN_PU),
+	PINMUX_DATA(PP0_DATA, PP0_IN, PP0_OUT, PP0_IN_PU),
+
+	/* PQ GPIO */
+	PINMUX_DATA(PQ4_DATA, PQ4_IN, PQ4_OUT, PQ4_IN_PU),
+	PINMUX_DATA(PQ3_DATA, PQ3_IN, PQ3_OUT, PQ3_IN_PU),
+	PINMUX_DATA(PQ2_DATA, PQ2_IN, PQ2_OUT, PQ2_IN_PU),
+	PINMUX_DATA(PQ1_DATA, PQ1_IN, PQ1_OUT, PQ1_IN_PU),
+	PINMUX_DATA(PQ0_DATA, PQ0_IN, PQ0_OUT, PQ0_IN_PU),
+
+	/* PR GPIO */
+	PINMUX_DATA(PR3_DATA, PR3_IN, PR3_OUT, PR3_IN_PU),
+	PINMUX_DATA(PR2_DATA, PR2_IN, PR2_OUT, PR2_IN_PU),
+	PINMUX_DATA(PR1_DATA, PR1_IN, PR1_OUT, PR1_IN_PU),
+	PINMUX_DATA(PR0_DATA, PR0_IN, PR0_OUT, PR0_IN_PU),
+
+	/* PA FN */
+	PINMUX_DATA(D63_AD31_MARK, PA7_FN),
+	PINMUX_DATA(D62_AD30_MARK, PA6_FN),
+	PINMUX_DATA(D61_AD29_MARK, PA5_FN),
+	PINMUX_DATA(D60_AD28_MARK, PA4_FN),
+	PINMUX_DATA(D59_AD27_MARK, PA3_FN),
+	PINMUX_DATA(D58_AD26_MARK, PA2_FN),
+	PINMUX_DATA(D57_AD25_MARK, PA1_FN),
+	PINMUX_DATA(D56_AD24_MARK, PA0_FN),
+
+	/* PB FN */
+	PINMUX_DATA(D55_AD23_MARK, PB7_FN),
+	PINMUX_DATA(D54_AD22_MARK, PB6_FN),
+	PINMUX_DATA(D53_AD21_MARK, PB5_FN),
+	PINMUX_DATA(D52_AD20_MARK, PB4_FN),
+	PINMUX_DATA(D51_AD19_MARK, PB3_FN),
+	PINMUX_DATA(D50_AD18_MARK, PB2_FN),
+	PINMUX_DATA(D49_AD17_DB5_MARK, PB1_FN),
+	PINMUX_DATA(D48_AD16_DB4_MARK, PB0_FN),
+
+	/* PC FN */
+	PINMUX_DATA(D47_AD15_DB3_MARK, PC7_FN),
+	PINMUX_DATA(D46_AD14_DB2_MARK, PC6_FN),
+	PINMUX_DATA(D45_AD13_DB1_MARK, PC5_FN),
+	PINMUX_DATA(D44_AD12_DB0_MARK, PC4_FN),
+	PINMUX_DATA(D43_AD11_DG5_MARK, PC3_FN),
+	PINMUX_DATA(D42_AD10_DG4_MARK, PC2_FN),
+	PINMUX_DATA(D41_AD9_DG3_MARK, PC1_FN),
+	PINMUX_DATA(D40_AD8_DG2_MARK, PC0_FN),
+
+	/* PD FN */
+	PINMUX_DATA(D39_AD7_DG1_MARK, PD7_FN),
+	PINMUX_DATA(D38_AD6_DG0_MARK, PD6_FN),
+	PINMUX_DATA(D37_AD5_DR5_MARK, PD5_FN),
+	PINMUX_DATA(D36_AD4_DR4_MARK, PD4_FN),
+	PINMUX_DATA(D35_AD3_DR3_MARK, PD3_FN),
+	PINMUX_DATA(D34_AD2_DR2_MARK, PD2_FN),
+	PINMUX_DATA(D33_AD1_DR1_MARK, PD1_FN),
+	PINMUX_DATA(D32_AD0_DR0_MARK, PD0_FN),
+
+	/* PE FN */
+	PINMUX_DATA(REQ1_MARK, PE5_FN),
+	PINMUX_DATA(REQ2_MARK, PE4_FN),
+	PINMUX_DATA(REQ3_MARK, P2MSEL0_0, PE3_FN),
+	PINMUX_DATA(GNT1_MARK, PE2_FN),
+	PINMUX_DATA(GNT2_MARK, PE1_FN),
+	PINMUX_DATA(GNT3_MARK, P2MSEL0_0, PE0_FN),
+	PINMUX_DATA(MMCCLK_MARK, P2MSEL0_1, PE0_FN),
+
+	/* PF FN */
+	PINMUX_DATA(D31_MARK, PF7_FN),
+	PINMUX_DATA(D30_MARK, PF6_FN),
+	PINMUX_DATA(D29_MARK, PF5_FN),
+	PINMUX_DATA(D28_MARK, PF4_FN),
+	PINMUX_DATA(D27_MARK, PF3_FN),
+	PINMUX_DATA(D26_MARK, PF2_FN),
+	PINMUX_DATA(D25_MARK, PF1_FN),
+	PINMUX_DATA(D24_MARK, PF0_FN),
+
+	/* PF FN */
+	PINMUX_DATA(D23_MARK, PG7_FN),
+	PINMUX_DATA(D22_MARK, PG6_FN),
+	PINMUX_DATA(D21_MARK, PG5_FN),
+	PINMUX_DATA(D20_MARK, PG4_FN),
+	PINMUX_DATA(D19_MARK, PG3_FN),
+	PINMUX_DATA(D18_MARK, PG2_FN),
+	PINMUX_DATA(D17_MARK, PG1_FN),
+	PINMUX_DATA(D16_MARK, PG0_FN),
+
+	/* PH FN */
+	PINMUX_DATA(SCIF1_SCK_MARK, PH7_FN),
+	PINMUX_DATA(SCIF1_RXD_MARK, PH6_FN),
+	PINMUX_DATA(SCIF1_TXD_MARK, PH5_FN),
+	PINMUX_DATA(SCIF0_CTS_MARK, PH4_FN),
+	PINMUX_DATA(INTD_MARK, P1MSEL7_1, PH4_FN),
+	PINMUX_DATA(FCE_MARK, P1MSEL8_1, P1MSEL7_0, PH4_FN),
+	PINMUX_DATA(SCIF0_RTS_MARK, P1MSEL8_0, P1MSEL7_0, PH3_FN),
+	PINMUX_DATA(HSPI_CS_MARK, P1MSEL8_0, P1MSEL7_1, PH3_FN),
+	PINMUX_DATA(FSE_MARK, P1MSEL8_1, P1MSEL7_0, PH3_FN),
+	PINMUX_DATA(SCIF0_SCK_MARK, P1MSEL8_0, P1MSEL7_0, PH2_FN),
+	PINMUX_DATA(HSPI_CLK_MARK, P1MSEL8_0, P1MSEL7_1, PH2_FN),
+	PINMUX_DATA(FRE_MARK, P1MSEL8_1, P1MSEL7_0, PH2_FN),
+	PINMUX_DATA(SCIF0_RXD_MARK, P1MSEL8_0, P1MSEL7_0, PH1_FN),
+	PINMUX_DATA(HSPI_RX_MARK, P1MSEL8_0, P1MSEL7_1, PH1_FN),
+	PINMUX_DATA(FRB_MARK, P1MSEL8_1, P1MSEL7_0, PH1_FN),
+	PINMUX_DATA(SCIF0_TXD_MARK, P1MSEL8_0, P1MSEL7_0, PH0_FN),
+	PINMUX_DATA(HSPI_TX_MARK, P1MSEL8_0, P1MSEL7_1, PH0_FN),
+	PINMUX_DATA(FWE_MARK, P1MSEL8_1, P1MSEL7_0, PH0_FN),
+
+	/* PJ FN */
+	PINMUX_DATA(SCIF5_TXD_MARK, P1MSEL2_0, P1MSEL1_0, PJ7_FN),
+	PINMUX_DATA(HAC1_SYNC_MARK, P1MSEL2_0, P1MSEL1_1, PJ7_FN),
+	PINMUX_DATA(SSI1_WS_MARK, P1MSEL2_1, P1MSEL1_0, PJ7_FN),
+	PINMUX_DATA(SIOF_TXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ6_FN),
+	PINMUX_DATA(HAC0_SDOUT_MARK, P1MSEL4_0, P1MSEL3_1, PJ6_FN),
+	PINMUX_DATA(SSI0_SDATA_MARK, P1MSEL4_1, P1MSEL3_0, PJ6_FN),
+	PINMUX_DATA(SIOF_RXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ5_FN),
+	PINMUX_DATA(HAC0_SDIN_MARK, P1MSEL4_0, P1MSEL3_1, PJ5_FN),
+	PINMUX_DATA(SSI0_SCK_MARK, P1MSEL4_1, P1MSEL3_0, PJ5_FN),
+	PINMUX_DATA(SIOF_SYNC_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ4_FN),
+	PINMUX_DATA(HAC0_SYNC_MARK, P1MSEL4_0, P1MSEL3_1, PJ4_FN),
+	PINMUX_DATA(SSI0_WS_MARK, P1MSEL4_1, P1MSEL3_0, PJ4_FN),
+	PINMUX_DATA(SIOF_MCLK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ3_FN),
+	PINMUX_DATA(HAC_RES_MARK, P1MSEL4_0, P1MSEL3_1, PJ3_FN),
+	PINMUX_DATA(SIOF_SCK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ2_FN),
+	PINMUX_DATA(HAC0_BITCLK_MARK, P1MSEL4_0, P1MSEL3_1, PJ2_FN),
+	PINMUX_DATA(SSI0_CLK_MARK, P1MSEL4_1, P1MSEL3_0, PJ2_FN),
+	PINMUX_DATA(HAC1_BITCLK_MARK, P1MSEL2_0, PJ1_FN),
+	PINMUX_DATA(SSI1_CLK_MARK, P1MSEL2_1, P1MSEL1_0, PJ1_FN),
+	PINMUX_DATA(TCLK_MARK, P1MSEL9_0, PJ0_FN),
+	PINMUX_DATA(IOIS16_MARK, P1MSEL9_1, PJ0_FN),
+
+	/* PK FN */
+	PINMUX_DATA(STATUS0_MARK, P1MSEL15_0, PK7_FN),
+	PINMUX_DATA(DRAK0_PK3_MARK, P1MSEL15_1, PK7_FN),
+	PINMUX_DATA(STATUS1_MARK, P1MSEL15_0, PK6_FN),
+	PINMUX_DATA(DRAK1_PK2_MARK, P1MSEL15_1, PK6_FN),
+	PINMUX_DATA(DACK2_MARK, P1MSEL12_0, P1MSEL11_0, PK5_FN),
+	PINMUX_DATA(SCIF2_TXD_MARK, P1MSEL12_1, P1MSEL11_0, PK5_FN),
+	PINMUX_DATA(MMCCMD_MARK, P1MSEL12_1, P1MSEL11_1, PK5_FN),
+	PINMUX_DATA(SIOF_TXD_PK_MARK, P2MSEL1_1,
+		    P1MSEL12_0, P1MSEL11_1, PK5_FN),
+	PINMUX_DATA(DACK3_MARK, P1MSEL12_0, P1MSEL11_0, PK4_FN),
+	PINMUX_DATA(SCIF2_SCK_MARK, P1MSEL12_1, P1MSEL11_0, PK4_FN),
+	PINMUX_DATA(MMCDAT_MARK, P1MSEL12_1, P1MSEL11_1, PK4_FN),
+	PINMUX_DATA(SIOF_SCK_PK_MARK, P2MSEL1_1,
+		    P1MSEL12_0, P1MSEL11_1, PK4_FN),
+	PINMUX_DATA(DREQ0_MARK, PK3_FN),
+	PINMUX_DATA(DREQ1_MARK, PK2_FN),
+	PINMUX_DATA(DRAK0_PK1_MARK, PK1_FN),
+	PINMUX_DATA(DRAK1_PK0_MARK, PK0_FN),
+
+	/* PL FN */
+	PINMUX_DATA(DREQ2_MARK, P1MSEL13_0, PL7_FN),
+	PINMUX_DATA(INTB_MARK, P1MSEL13_1, PL7_FN),
+	PINMUX_DATA(DREQ3_MARK, P1MSEL13_0, PL6_FN),
+	PINMUX_DATA(INTC_MARK, P1MSEL13_1, PL6_FN),
+	PINMUX_DATA(DRAK2_MARK, P1MSEL10_0, PL5_FN),
+	PINMUX_DATA(CE2A_MARK, P1MSEL10_1, PL5_FN),
+	PINMUX_DATA(IRL4_MARK, P1MSEL14_0, PL4_FN),
+	PINMUX_DATA(FD4_MARK, P1MSEL14_1, PL4_FN),
+	PINMUX_DATA(IRL5_MARK, P1MSEL14_0, PL3_FN),
+	PINMUX_DATA(FD5_MARK, P1MSEL14_1, PL3_FN),
+	PINMUX_DATA(IRL6_MARK, P1MSEL14_0, PL2_FN),
+	PINMUX_DATA(FD6_MARK, P1MSEL14_1, PL2_FN),
+	PINMUX_DATA(IRL7_MARK, P1MSEL14_0, PL1_FN),
+	PINMUX_DATA(FD7_MARK, P1MSEL14_1, PL1_FN),
+	PINMUX_DATA(DRAK3_MARK, P1MSEL10_0, PL0_FN),
+	PINMUX_DATA(CE2B_MARK, P1MSEL10_1, PL0_FN),
+
+	/* PM FN */
+	PINMUX_DATA(BREQ_BSACK_MARK, PM1_FN),
+	PINMUX_DATA(BACK_BSREQ_MARK, PM0_FN),
+
+	/* PN FN */
+	PINMUX_DATA(SCIF5_RXD_MARK, P1MSEL2_0, P1MSEL1_0, PN7_FN),
+	PINMUX_DATA(HAC1_SDIN_MARK, P1MSEL2_0, P1MSEL1_1, PN7_FN),
+	PINMUX_DATA(SSI1_SCK_MARK, P1MSEL2_1, P1MSEL1_0, PN7_FN),
+	PINMUX_DATA(SCIF5_SCK_MARK, P1MSEL2_0, P1MSEL1_0, PN6_FN),
+	PINMUX_DATA(HAC1_SDOUT_MARK, P1MSEL2_0, P1MSEL1_1, PN6_FN),
+	PINMUX_DATA(SSI1_SDATA_MARK, P1MSEL2_1, P1MSEL1_0, PN6_FN),
+	PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL0_0, PN5_FN),
+	PINMUX_DATA(FCLE_MARK, P1MSEL0_1, PN5_FN),
+	PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL0_0, PN4_FN),
+	PINMUX_DATA(FALE_MARK, P1MSEL0_1, PN4_FN),
+	PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL0_0, PN3_FN),
+	PINMUX_DATA(FD0_MARK, P1MSEL0_1, PN3_FN),
+	PINMUX_DATA(SCIF4_TXD_MARK, P1MSEL0_0, PN2_FN),
+	PINMUX_DATA(FD1_MARK, P1MSEL0_1, PN2_FN),
+	PINMUX_DATA(SCIF4_RXD_MARK, P1MSEL0_0, PN1_FN),
+	PINMUX_DATA(FD2_MARK, P1MSEL0_1, PN1_FN),
+	PINMUX_DATA(SCIF4_SCK_MARK, P1MSEL0_0, PN0_FN),
+	PINMUX_DATA(FD3_MARK, P1MSEL0_1, PN0_FN),
+
+	/* PP FN */
+	PINMUX_DATA(DEVSEL_DCLKOUT_MARK, PP5_FN),
+	PINMUX_DATA(STOP_CDE_MARK, PP4_FN),
+	PINMUX_DATA(LOCK_ODDF_MARK, PP3_FN),
+	PINMUX_DATA(TRDY_DISPL_MARK, PP2_FN),
+	PINMUX_DATA(IRDY_HSYNC_MARK, PP1_FN),
+	PINMUX_DATA(PCIFRAME_VSYNC_MARK, PP0_FN),
+
+	/* PQ FN */
+	PINMUX_DATA(INTA_MARK, PQ4_FN),
+	PINMUX_DATA(GNT0_GNTIN_MARK, PQ3_FN),
+	PINMUX_DATA(REQ0_REQOUT_MARK, PQ2_FN),
+	PINMUX_DATA(PERR_MARK, PQ1_FN),
+	PINMUX_DATA(SERR_MARK, PQ0_FN),
+
+	/* PR FN */
+	PINMUX_DATA(WE7_CBE3_MARK, PR3_FN),
+	PINMUX_DATA(WE6_CBE2_MARK, PR2_FN),
+	PINMUX_DATA(WE5_CBE1_MARK, PR1_FN),
+	PINMUX_DATA(WE4_CBE0_MARK, PR0_FN),
+
+	/* MISC FN */
+	PINMUX_DATA(SCIF2_RXD_MARK, P1MSEL6_0, P1MSEL5_0),
+	PINMUX_DATA(SIOF_RXD_MARK, P2MSEL1_1, P1MSEL6_1, P1MSEL5_0),
+	PINMUX_DATA(MRESETOUT_MARK, P2MSEL2_0),
+	PINMUX_DATA(IRQOUT_MARK, P2MSEL2_1),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* PA */
+	PINMUX_GPIO(GPIO_PA7, PA7_DATA),
+	PINMUX_GPIO(GPIO_PA6, PA6_DATA),
+	PINMUX_GPIO(GPIO_PA5, PA5_DATA),
+	PINMUX_GPIO(GPIO_PA4, PA4_DATA),
+	PINMUX_GPIO(GPIO_PA3, PA3_DATA),
+	PINMUX_GPIO(GPIO_PA2, PA2_DATA),
+	PINMUX_GPIO(GPIO_PA1, PA1_DATA),
+	PINMUX_GPIO(GPIO_PA0, PA0_DATA),
+
+	/* PB */
+	PINMUX_GPIO(GPIO_PB7, PB7_DATA),
+	PINMUX_GPIO(GPIO_PB6, PB6_DATA),
+	PINMUX_GPIO(GPIO_PB5, PB5_DATA),
+	PINMUX_GPIO(GPIO_PB4, PB4_DATA),
+	PINMUX_GPIO(GPIO_PB3, PB3_DATA),
+	PINMUX_GPIO(GPIO_PB2, PB2_DATA),
+	PINMUX_GPIO(GPIO_PB1, PB1_DATA),
+	PINMUX_GPIO(GPIO_PB0, PB0_DATA),
+
+	/* PC */
+	PINMUX_GPIO(GPIO_PC7, PC7_DATA),
+	PINMUX_GPIO(GPIO_PC6, PC6_DATA),
+	PINMUX_GPIO(GPIO_PC5, PC5_DATA),
+	PINMUX_GPIO(GPIO_PC4, PC4_DATA),
+	PINMUX_GPIO(GPIO_PC3, PC3_DATA),
+	PINMUX_GPIO(GPIO_PC2, PC2_DATA),
+	PINMUX_GPIO(GPIO_PC1, PC1_DATA),
+	PINMUX_GPIO(GPIO_PC0, PC0_DATA),
+
+	/* PD */
+	PINMUX_GPIO(GPIO_PD7, PD7_DATA),
+	PINMUX_GPIO(GPIO_PD6, PD6_DATA),
+	PINMUX_GPIO(GPIO_PD5, PD5_DATA),
+	PINMUX_GPIO(GPIO_PD4, PD4_DATA),
+	PINMUX_GPIO(GPIO_PD3, PD3_DATA),
+	PINMUX_GPIO(GPIO_PD2, PD2_DATA),
+	PINMUX_GPIO(GPIO_PD1, PD1_DATA),
+	PINMUX_GPIO(GPIO_PD0, PD0_DATA),
+
+	/* PE */
+	PINMUX_GPIO(GPIO_PE5, PE5_DATA),
+	PINMUX_GPIO(GPIO_PE4, PE4_DATA),
+	PINMUX_GPIO(GPIO_PE3, PE3_DATA),
+	PINMUX_GPIO(GPIO_PE2, PE2_DATA),
+	PINMUX_GPIO(GPIO_PE1, PE1_DATA),
+	PINMUX_GPIO(GPIO_PE0, PE0_DATA),
+
+	/* PF */
+	PINMUX_GPIO(GPIO_PF7, PF7_DATA),
+	PINMUX_GPIO(GPIO_PF6, PF6_DATA),
+	PINMUX_GPIO(GPIO_PF5, PF5_DATA),
+	PINMUX_GPIO(GPIO_PF4, PF4_DATA),
+	PINMUX_GPIO(GPIO_PF3, PF3_DATA),
+	PINMUX_GPIO(GPIO_PF2, PF2_DATA),
+	PINMUX_GPIO(GPIO_PF1, PF1_DATA),
+	PINMUX_GPIO(GPIO_PF0, PF0_DATA),
+
+	/* PG */
+	PINMUX_GPIO(GPIO_PG7, PG7_DATA),
+	PINMUX_GPIO(GPIO_PG6, PG6_DATA),
+	PINMUX_GPIO(GPIO_PG5, PG5_DATA),
+	PINMUX_GPIO(GPIO_PG4, PG4_DATA),
+	PINMUX_GPIO(GPIO_PG3, PG3_DATA),
+	PINMUX_GPIO(GPIO_PG2, PG2_DATA),
+	PINMUX_GPIO(GPIO_PG1, PG1_DATA),
+	PINMUX_GPIO(GPIO_PG0, PG0_DATA),
+
+	/* PH */
+	PINMUX_GPIO(GPIO_PH7, PH7_DATA),
+	PINMUX_GPIO(GPIO_PH6, PH6_DATA),
+	PINMUX_GPIO(GPIO_PH5, PH5_DATA),
+	PINMUX_GPIO(GPIO_PH4, PH4_DATA),
+	PINMUX_GPIO(GPIO_PH3, PH3_DATA),
+	PINMUX_GPIO(GPIO_PH2, PH2_DATA),
+	PINMUX_GPIO(GPIO_PH1, PH1_DATA),
+	PINMUX_GPIO(GPIO_PH0, PH0_DATA),
+
+	/* PJ */
+	PINMUX_GPIO(GPIO_PJ7, PJ7_DATA),
+	PINMUX_GPIO(GPIO_PJ6, PJ6_DATA),
+	PINMUX_GPIO(GPIO_PJ5, PJ5_DATA),
+	PINMUX_GPIO(GPIO_PJ4, PJ4_DATA),
+	PINMUX_GPIO(GPIO_PJ3, PJ3_DATA),
+	PINMUX_GPIO(GPIO_PJ2, PJ2_DATA),
+	PINMUX_GPIO(GPIO_PJ1, PJ1_DATA),
+	PINMUX_GPIO(GPIO_PJ0, PJ0_DATA),
+
+	/* PK */
+	PINMUX_GPIO(GPIO_PK7, PK7_DATA),
+	PINMUX_GPIO(GPIO_PK6, PK6_DATA),
+	PINMUX_GPIO(GPIO_PK5, PK5_DATA),
+	PINMUX_GPIO(GPIO_PK4, PK4_DATA),
+	PINMUX_GPIO(GPIO_PK3, PK3_DATA),
+	PINMUX_GPIO(GPIO_PK2, PK2_DATA),
+	PINMUX_GPIO(GPIO_PK1, PK1_DATA),
+	PINMUX_GPIO(GPIO_PK0, PK0_DATA),
+
+	/* PL */
+	PINMUX_GPIO(GPIO_PL7, PL7_DATA),
+	PINMUX_GPIO(GPIO_PL6, PL6_DATA),
+	PINMUX_GPIO(GPIO_PL5, PL5_DATA),
+	PINMUX_GPIO(GPIO_PL4, PL4_DATA),
+	PINMUX_GPIO(GPIO_PL3, PL3_DATA),
+	PINMUX_GPIO(GPIO_PL2, PL2_DATA),
+	PINMUX_GPIO(GPIO_PL1, PL1_DATA),
+	PINMUX_GPIO(GPIO_PL0, PL0_DATA),
+
+	/* PM */
+	PINMUX_GPIO(GPIO_PM1, PM1_DATA),
+	PINMUX_GPIO(GPIO_PM0, PM0_DATA),
+
+	/* PN */
+	PINMUX_GPIO(GPIO_PN7, PN7_DATA),
+	PINMUX_GPIO(GPIO_PN6, PN6_DATA),
+	PINMUX_GPIO(GPIO_PN5, PN5_DATA),
+	PINMUX_GPIO(GPIO_PN4, PN4_DATA),
+	PINMUX_GPIO(GPIO_PN3, PN3_DATA),
+	PINMUX_GPIO(GPIO_PN2, PN2_DATA),
+	PINMUX_GPIO(GPIO_PN1, PN1_DATA),
+	PINMUX_GPIO(GPIO_PN0, PN0_DATA),
+
+	/* PP */
+	PINMUX_GPIO(GPIO_PP5, PP5_DATA),
+	PINMUX_GPIO(GPIO_PP4, PP4_DATA),
+	PINMUX_GPIO(GPIO_PP3, PP3_DATA),
+	PINMUX_GPIO(GPIO_PP2, PP2_DATA),
+	PINMUX_GPIO(GPIO_PP1, PP1_DATA),
+	PINMUX_GPIO(GPIO_PP0, PP0_DATA),
+
+	/* PQ */
+	PINMUX_GPIO(GPIO_PQ4, PQ4_DATA),
+	PINMUX_GPIO(GPIO_PQ3, PQ3_DATA),
+	PINMUX_GPIO(GPIO_PQ2, PQ2_DATA),
+	PINMUX_GPIO(GPIO_PQ1, PQ1_DATA),
+	PINMUX_GPIO(GPIO_PQ0, PQ0_DATA),
+
+	/* PR */
+	PINMUX_GPIO(GPIO_PR3, PR3_DATA),
+	PINMUX_GPIO(GPIO_PR2, PR2_DATA),
+	PINMUX_GPIO(GPIO_PR1, PR1_DATA),
+	PINMUX_GPIO(GPIO_PR0, PR0_DATA),
+
+	/* FN */
+	PINMUX_GPIO(GPIO_FN_D63_AD31, D63_AD31_MARK),
+	PINMUX_GPIO(GPIO_FN_D62_AD30, D62_AD30_MARK),
+	PINMUX_GPIO(GPIO_FN_D61_AD29, D61_AD29_MARK),
+	PINMUX_GPIO(GPIO_FN_D60_AD28, D60_AD28_MARK),
+	PINMUX_GPIO(GPIO_FN_D59_AD27, D59_AD27_MARK),
+	PINMUX_GPIO(GPIO_FN_D58_AD26, D58_AD26_MARK),
+	PINMUX_GPIO(GPIO_FN_D57_AD25, D57_AD25_MARK),
+	PINMUX_GPIO(GPIO_FN_D56_AD24, D56_AD24_MARK),
+	PINMUX_GPIO(GPIO_FN_D55_AD23, D55_AD23_MARK),
+	PINMUX_GPIO(GPIO_FN_D54_AD22, D54_AD22_MARK),
+	PINMUX_GPIO(GPIO_FN_D53_AD21, D53_AD21_MARK),
+	PINMUX_GPIO(GPIO_FN_D52_AD20, D52_AD20_MARK),
+	PINMUX_GPIO(GPIO_FN_D51_AD19, D51_AD19_MARK),
+	PINMUX_GPIO(GPIO_FN_D50_AD18, D50_AD18_MARK),
+	PINMUX_GPIO(GPIO_FN_D49_AD17_DB5, D49_AD17_DB5_MARK),
+	PINMUX_GPIO(GPIO_FN_D48_AD16_DB4, D48_AD16_DB4_MARK),
+	PINMUX_GPIO(GPIO_FN_D47_AD15_DB3, D47_AD15_DB3_MARK),
+	PINMUX_GPIO(GPIO_FN_D46_AD14_DB2, D46_AD14_DB2_MARK),
+	PINMUX_GPIO(GPIO_FN_D45_AD13_DB1, D45_AD13_DB1_MARK),
+	PINMUX_GPIO(GPIO_FN_D44_AD12_DB0, D44_AD12_DB0_MARK),
+	PINMUX_GPIO(GPIO_FN_D43_AD11_DG5, D43_AD11_DG5_MARK),
+	PINMUX_GPIO(GPIO_FN_D42_AD10_DG4, D42_AD10_DG4_MARK),
+	PINMUX_GPIO(GPIO_FN_D41_AD9_DG3, D41_AD9_DG3_MARK),
+	PINMUX_GPIO(GPIO_FN_D40_AD8_DG2, D40_AD8_DG2_MARK),
+	PINMUX_GPIO(GPIO_FN_D39_AD7_DG1, D39_AD7_DG1_MARK),
+	PINMUX_GPIO(GPIO_FN_D38_AD6_DG0, D38_AD6_DG0_MARK),
+	PINMUX_GPIO(GPIO_FN_D37_AD5_DR5, D37_AD5_DR5_MARK),
+	PINMUX_GPIO(GPIO_FN_D36_AD4_DR4, D36_AD4_DR4_MARK),
+	PINMUX_GPIO(GPIO_FN_D35_AD3_DR3, D35_AD3_DR3_MARK),
+	PINMUX_GPIO(GPIO_FN_D34_AD2_DR2, D34_AD2_DR2_MARK),
+	PINMUX_GPIO(GPIO_FN_D33_AD1_DR1, D33_AD1_DR1_MARK),
+	PINMUX_GPIO(GPIO_FN_D32_AD0_DR0, D32_AD0_DR0_MARK),
+	PINMUX_GPIO(GPIO_FN_REQ1, REQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_REQ2, REQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_REQ3, REQ3_MARK),
+	PINMUX_GPIO(GPIO_FN_GNT1, GNT1_MARK),
+	PINMUX_GPIO(GPIO_FN_GNT2, GNT2_MARK),
+	PINMUX_GPIO(GPIO_FN_GNT3, GNT3_MARK),
+	PINMUX_GPIO(GPIO_FN_MMCCLK, MMCCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_D31, D31_MARK),
+	PINMUX_GPIO(GPIO_FN_D30, D30_MARK),
+	PINMUX_GPIO(GPIO_FN_D29, D29_MARK),
+	PINMUX_GPIO(GPIO_FN_D28, D28_MARK),
+	PINMUX_GPIO(GPIO_FN_D27, D27_MARK),
+	PINMUX_GPIO(GPIO_FN_D26, D26_MARK),
+	PINMUX_GPIO(GPIO_FN_D25, D25_MARK),
+	PINMUX_GPIO(GPIO_FN_D24, D24_MARK),
+	PINMUX_GPIO(GPIO_FN_D23, D23_MARK),
+	PINMUX_GPIO(GPIO_FN_D22, D22_MARK),
+	PINMUX_GPIO(GPIO_FN_D21, D21_MARK),
+	PINMUX_GPIO(GPIO_FN_D20, D20_MARK),
+	PINMUX_GPIO(GPIO_FN_D19, D19_MARK),
+	PINMUX_GPIO(GPIO_FN_D18, D18_MARK),
+	PINMUX_GPIO(GPIO_FN_D17, D17_MARK),
+	PINMUX_GPIO(GPIO_FN_D16, D16_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_SCK, SCIF1_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_CTS, SCIF0_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_INTD, INTD_MARK),
+	PINMUX_GPIO(GPIO_FN_FCE, FCE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RTS, SCIF0_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_CS, HSPI_CS_MARK),
+	PINMUX_GPIO(GPIO_FN_FSE, FSE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_CLK, HSPI_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_FRE, FRE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_RX, HSPI_RX_MARK),
+	PINMUX_GPIO(GPIO_FN_FRB, FRB_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_TX, HSPI_TX_MARK),
+	PINMUX_GPIO(GPIO_FN_FWE, FWE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_TXD, SCIF5_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_SYNC, HAC1_SYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_WS, SSI1_WS_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_TXD_PJ, SIOF_TXD_PJ_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_SDOUT, HAC0_SDOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_SDATA, SSI0_SDATA_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_RXD_PJ, SIOF_RXD_PJ_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_SDIN, HAC0_SDIN_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_SCK, SSI0_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_SYNC_PJ, SIOF_SYNC_PJ_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_SYNC, HAC0_SYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_WS, SSI0_WS_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_MCLK_PJ, SIOF_MCLK_PJ_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC_RES, HAC_RES_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_SCK_PJ, SIOF_SCK_PJ_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_BITCLK, HAC0_BITCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_CLK, SSI0_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_BITCLK, HAC1_BITCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_CLK, SSI1_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLK, TCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK),
+	PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK0_PK3, DRAK0_PK3_MARK),
+	PINMUX_GPIO(GPIO_FN_STATUS1, STATUS1_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK1_PK2, DRAK1_PK2_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK2, DACK2_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_TXD, SCIF2_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MMCCMD, MMCCMD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_TXD_PK, SIOF_TXD_PK_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK3, DACK3_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_SCK, SCIF2_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MMCDAT, MMCDAT_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_SCK_PK, SIOF_SCK_PK_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ1, DREQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK0_PK1, DRAK0_PK1_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK1_PK0, DRAK1_PK0_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ2, DREQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_INTB, INTB_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ3, DREQ3_MARK),
+	PINMUX_GPIO(GPIO_FN_INTC, INTC_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK2, DRAK2_MARK),
+	PINMUX_GPIO(GPIO_FN_CE2A, CE2A_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL4, IRL4_MARK),
+	PINMUX_GPIO(GPIO_FN_FD4, FD4_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL5, IRL5_MARK),
+	PINMUX_GPIO(GPIO_FN_FD5, FD5_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL6, IRL6_MARK),
+	PINMUX_GPIO(GPIO_FN_FD6, FD6_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL7, IRL7_MARK),
+	PINMUX_GPIO(GPIO_FN_FD7, FD7_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK3, DRAK3_MARK),
+	PINMUX_GPIO(GPIO_FN_CE2B, CE2B_MARK),
+	PINMUX_GPIO(GPIO_FN_BREQ_BSACK, BREQ_BSACK_MARK),
+	PINMUX_GPIO(GPIO_FN_BACK_BSREQ, BACK_BSREQ_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_RXD, SCIF5_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_SDIN, HAC1_SDIN_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_SCK, SSI1_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_SCK, SCIF5_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_SDOUT, HAC1_SDOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_SDATA, SSI1_SDATA_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_TXD, SCIF3_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_FCLE, FCLE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_RXD, SCIF3_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_FALE, FALE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_SCK, SCIF3_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FD0, FD0_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_TXD, SCIF4_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_FD1, FD1_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_RXD, SCIF4_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_FD2, FD2_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_SCK, SCIF4_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FD3, FD3_MARK),
+	PINMUX_GPIO(GPIO_FN_DEVSEL_DCLKOUT, DEVSEL_DCLKOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_STOP_CDE, STOP_CDE_MARK),
+	PINMUX_GPIO(GPIO_FN_LOCK_ODDF, LOCK_ODDF_MARK),
+	PINMUX_GPIO(GPIO_FN_TRDY_DISPL, TRDY_DISPL_MARK),
+	PINMUX_GPIO(GPIO_FN_IRDY_HSYNC, IRDY_HSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_PCIFRAME_VSYNC, PCIFRAME_VSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_INTA, INTA_MARK),
+	PINMUX_GPIO(GPIO_FN_GNT0_GNTIN, GNT0_GNTIN_MARK),
+	PINMUX_GPIO(GPIO_FN_REQ0_REQOUT, REQ0_REQOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_PERR, PERR_MARK),
+	PINMUX_GPIO(GPIO_FN_SERR, SERR_MARK),
+	PINMUX_GPIO(GPIO_FN_WE7_CBE3, WE7_CBE3_MARK),
+	PINMUX_GPIO(GPIO_FN_WE6_CBE2, WE6_CBE2_MARK),
+	PINMUX_GPIO(GPIO_FN_WE5_CBE1, WE5_CBE1_MARK),
+	PINMUX_GPIO(GPIO_FN_WE4_CBE0, WE4_CBE0_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_RXD, SCIF2_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_RXD, SIOF_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MRESETOUT, MRESETOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQOUT, IRQOUT_MARK),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("PACR", 0xffe70000, 16, 2) {
+		PA7_FN, PA7_OUT, PA7_IN, PA7_IN_PU,
+		PA6_FN, PA6_OUT, PA6_IN, PA6_IN_PU,
+		PA5_FN, PA5_OUT, PA5_IN, PA5_IN_PU,
+		PA4_FN, PA4_OUT, PA4_IN, PA4_IN_PU,
+		PA3_FN, PA3_OUT, PA3_IN, PA3_IN_PU,
+		PA2_FN, PA2_OUT, PA2_IN, PA2_IN_PU,
+		PA1_FN, PA1_OUT, PA1_IN, PA1_IN_PU,
+		PA0_FN, PA0_OUT, PA0_IN, PA0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PBCR", 0xffe70002, 16, 2) {
+		PB7_FN, PB7_OUT, PB7_IN, PB7_IN_PU,
+		PB6_FN, PB6_OUT, PB6_IN, PB6_IN_PU,
+		PB5_FN, PB5_OUT, PB5_IN, PB5_IN_PU,
+		PB4_FN, PB4_OUT, PB4_IN, PB4_IN_PU,
+		PB3_FN, PB3_OUT, PB3_IN, PB3_IN_PU,
+		PB2_FN, PB2_OUT, PB2_IN, PB2_IN_PU,
+		PB1_FN, PB1_OUT, PB1_IN, PB1_IN_PU,
+		PB0_FN, PB0_OUT, PB0_IN, PB0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PCCR", 0xffe70004, 16, 2) {
+		PC7_FN, PC7_OUT, PC7_IN, PC7_IN_PU,
+		PC6_FN, PC6_OUT, PC6_IN, PC6_IN_PU,
+		PC5_FN, PC5_OUT, PC5_IN, PC5_IN_PU,
+		PC4_FN, PC4_OUT, PC4_IN, PC4_IN_PU,
+		PC3_FN, PC3_OUT, PC3_IN, PC3_IN_PU,
+		PC2_FN, PC2_OUT, PC2_IN, PC2_IN_PU,
+		PC1_FN, PC1_OUT, PC1_IN, PC1_IN_PU,
+		PC0_FN, PC0_OUT, PC0_IN, PC0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PDCR", 0xffe70006, 16, 2) {
+		PD7_FN, PD7_OUT, PD7_IN, PD7_IN_PU,
+		PD6_FN, PD6_OUT, PD6_IN, PD6_IN_PU,
+		PD5_FN, PD5_OUT, PD5_IN, PD5_IN_PU,
+		PD4_FN, PD4_OUT, PD4_IN, PD4_IN_PU,
+		PD3_FN, PD3_OUT, PD3_IN, PD3_IN_PU,
+		PD2_FN, PD2_OUT, PD2_IN, PD2_IN_PU,
+		PD1_FN, PD1_OUT, PD1_IN, PD1_IN_PU,
+		PD0_FN, PD0_OUT, PD0_IN, PD0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PECR", 0xffe70008, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PE5_FN, PE5_OUT, PE5_IN, PE5_IN_PU,
+		PE4_FN, PE4_OUT, PE4_IN, PE4_IN_PU,
+		PE3_FN, PE3_OUT, PE3_IN, PE3_IN_PU,
+		PE2_FN, PE2_OUT, PE2_IN, PE2_IN_PU,
+		PE1_FN, PE1_OUT, PE1_IN, PE1_IN_PU,
+		PE0_FN, PE0_OUT, PE0_IN, PE0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PFCR", 0xffe7000a, 16, 2) {
+		PF7_FN, PF7_OUT, PF7_IN, PF7_IN_PU,
+		PF6_FN, PF6_OUT, PF6_IN, PF6_IN_PU,
+		PF5_FN, PF5_OUT, PF5_IN, PF5_IN_PU,
+		PF4_FN, PF4_OUT, PF4_IN, PF4_IN_PU,
+		PF3_FN, PF3_OUT, PF3_IN, PF3_IN_PU,
+		PF2_FN, PF2_OUT, PF2_IN, PF2_IN_PU,
+		PF1_FN, PF1_OUT, PF1_IN, PF1_IN_PU,
+		PF0_FN, PF0_OUT, PF0_IN, PF0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PGCR", 0xffe7000c, 16, 2) {
+		PG7_FN, PG7_OUT, PG7_IN, PG7_IN_PU,
+		PG6_FN, PG6_OUT, PG6_IN, PG6_IN_PU,
+		PG5_FN, PG5_OUT, PG5_IN, PG5_IN_PU,
+		PG4_FN, PG4_OUT, PG4_IN, PG4_IN_PU,
+		PG3_FN, PG3_OUT, PG3_IN, PG3_IN_PU,
+		PG2_FN, PG2_OUT, PG2_IN, PG2_IN_PU,
+		PG1_FN, PG1_OUT, PG1_IN, PG1_IN_PU,
+		PG0_FN, PG0_OUT, PG0_IN, PG0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PHCR", 0xffe7000e, 16, 2) {
+		PH7_FN, PH7_OUT, PH7_IN, PH7_IN_PU,
+		PH6_FN, PH6_OUT, PH6_IN, PH6_IN_PU,
+		PH5_FN, PH5_OUT, PH5_IN, PH5_IN_PU,
+		PH4_FN, PH4_OUT, PH4_IN, PH4_IN_PU,
+		PH3_FN, PH3_OUT, PH3_IN, PH3_IN_PU,
+		PH2_FN, PH2_OUT, PH2_IN, PH2_IN_PU,
+		PH1_FN, PH1_OUT, PH1_IN, PH1_IN_PU,
+		PH0_FN, PH0_OUT, PH0_IN, PH0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PJCR", 0xffe70010, 16, 2) {
+		PJ7_FN, PJ7_OUT, PJ7_IN, PJ7_IN_PU,
+		PJ6_FN, PJ6_OUT, PJ6_IN, PJ6_IN_PU,
+		PJ5_FN, PJ5_OUT, PJ5_IN, PJ5_IN_PU,
+		PJ4_FN, PJ4_OUT, PJ4_IN, PJ4_IN_PU,
+		PJ3_FN, PJ3_OUT, PJ3_IN, PJ3_IN_PU,
+		PJ2_FN, PJ2_OUT, PJ2_IN, PJ2_IN_PU,
+		PJ1_FN, PJ1_OUT, PJ1_IN, PJ1_IN_PU,
+		PJ0_FN, PJ0_OUT, PJ0_IN, PJ0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PKCR", 0xffe70012, 16, 2) {
+		PK7_FN, PK7_OUT, PK7_IN, PK7_IN_PU,
+		PK6_FN, PK6_OUT, PK6_IN, PK6_IN_PU,
+		PK5_FN, PK5_OUT, PK5_IN, PK5_IN_PU,
+		PK4_FN, PK4_OUT, PK4_IN, PK4_IN_PU,
+		PK3_FN, PK3_OUT, PK3_IN, PK3_IN_PU,
+		PK2_FN, PK2_OUT, PK2_IN, PK2_IN_PU,
+		PK1_FN, PK1_OUT, PK1_IN, PK1_IN_PU,
+		PK0_FN, PK0_OUT, PK0_IN, PK0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PLCR", 0xffe70014, 16, 2) {
+		PL7_FN, PL7_OUT, PL7_IN, PL7_IN_PU,
+		PL6_FN, PL6_OUT, PL6_IN, PL6_IN_PU,
+		PL5_FN, PL5_OUT, PL5_IN, PL5_IN_PU,
+		PL4_FN, PL4_OUT, PL4_IN, PL4_IN_PU,
+		PL3_FN, PL3_OUT, PL3_IN, PL3_IN_PU,
+		PL2_FN, PL2_OUT, PL2_IN, PL2_IN_PU,
+		PL1_FN, PL1_OUT, PL1_IN, PL1_IN_PU,
+		PL0_FN, PL0_OUT, PL0_IN, PL0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PMCR", 0xffe70016, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PM1_FN, PM1_OUT, PM1_IN, PM1_IN_PU,
+		PM0_FN, PM0_OUT, PM0_IN, PM0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PNCR", 0xffe70018, 16, 2) {
+		PN7_FN, PN7_OUT, PN7_IN, PN7_IN_PU,
+		PN6_FN, PN6_OUT, PN6_IN, PN6_IN_PU,
+		PN5_FN, PN5_OUT, PN5_IN, PN5_IN_PU,
+		PN4_FN, PN4_OUT, PN4_IN, PN4_IN_PU,
+		PN3_FN, PN3_OUT, PN3_IN, PN3_IN_PU,
+		PN2_FN, PN2_OUT, PN2_IN, PN2_IN_PU,
+		PN1_FN, PN1_OUT, PN1_IN, PN1_IN_PU,
+		PN0_FN, PN0_OUT, PN0_IN, PN0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PPCR", 0xffe7001a, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PP5_FN, PP5_OUT, PP5_IN, PP5_IN_PU,
+		PP4_FN, PP4_OUT, PP4_IN, PP4_IN_PU,
+		PP3_FN, PP3_OUT, PP3_IN, PP3_IN_PU,
+		PP2_FN, PP2_OUT, PP2_IN, PP2_IN_PU,
+		PP1_FN, PP1_OUT, PP1_IN, PP1_IN_PU,
+		PP0_FN, PP0_OUT, PP0_IN, PP0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PQCR", 0xffe7001c, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PQ4_FN, PQ4_OUT, PQ4_IN, PQ4_IN_PU,
+		PQ3_FN, PQ3_OUT, PQ3_IN, PQ3_IN_PU,
+		PQ2_FN, PQ2_OUT, PQ2_IN, PQ2_IN_PU,
+		PQ1_FN, PQ1_OUT, PQ1_IN, PQ1_IN_PU,
+		PQ0_FN, PQ0_OUT, PQ0_IN, PQ0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PRCR", 0xffe7001e, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PR3_FN, PR3_OUT, PR3_IN, PR3_IN_PU,
+		PR2_FN, PR2_OUT, PR2_IN, PR2_IN_PU,
+		PR1_FN, PR1_OUT, PR1_IN, PR1_IN_PU,
+		PR0_FN, PR0_OUT, PR0_IN, PR0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("P1MSELR", 0xffe70080, 16, 1) {
+		P1MSEL15_0, P1MSEL15_1,
+		P1MSEL14_0, P1MSEL14_1,
+		P1MSEL13_0, P1MSEL13_1,
+		P1MSEL12_0, P1MSEL12_1,
+		P1MSEL11_0, P1MSEL11_1,
+		P1MSEL10_0, P1MSEL10_1,
+		P1MSEL9_0, P1MSEL9_1,
+		P1MSEL8_0, P1MSEL8_1,
+		P1MSEL7_0, P1MSEL7_1,
+		P1MSEL6_0, P1MSEL6_1,
+		P1MSEL5_0, 0,
+		P1MSEL4_0, P1MSEL4_1,
+		P1MSEL3_0, P1MSEL3_1,
+		P1MSEL2_0, P1MSEL2_1,
+		P1MSEL1_0, P1MSEL1_1,
+		P1MSEL0_0, P1MSEL0_1 }
+	},
+	{ PINMUX_CFG_REG("P2MSELR", 0xffe70082, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		P2MSEL2_0, P2MSEL2_1,
+		P2MSEL1_0, P2MSEL1_1,
+		P2MSEL0_0, P2MSEL0_1 }
+	},
+	{}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PADR", 0xffe70020, 8) {
+		PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
+		PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA }
+	},
+	{ PINMUX_DATA_REG("PBDR", 0xffe70022, 8) {
+		PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
+		PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA }
+	},
+	{ PINMUX_DATA_REG("PCDR", 0xffe70024, 8) {
+		PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
+		PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA }
+	},
+	{ PINMUX_DATA_REG("PDDR", 0xffe70026, 8) {
+		PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
+		PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA }
+	},
+	{ PINMUX_DATA_REG("PEDR", 0xffe70028, 8) {
+		0, 0, PE5_DATA, PE4_DATA,
+		PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA }
+	},
+	{ PINMUX_DATA_REG("PFDR", 0xffe7002a, 8) {
+		PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
+		PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA }
+	},
+	{ PINMUX_DATA_REG("PGDR", 0xffe7002c, 8) {
+		PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
+		PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA }
+	},
+	{ PINMUX_DATA_REG("PHDR", 0xffe7002e, 8) {
+		PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
+		PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA }
+	},
+	{ PINMUX_DATA_REG("PJDR", 0xffe70030, 8) {
+		PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
+		PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PKDR", 0xffe70032, 8) {
+		PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
+		PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA }
+	},
+	{ PINMUX_DATA_REG("PLDR", 0xffe70034, 8) {
+		PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA,
+		PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA }
+	},
+	{ PINMUX_DATA_REG("PMDR", 0xffe70036, 8) {
+		0, 0, 0, 0,
+		0, 0, PM1_DATA, PM0_DATA }
+	},
+	{ PINMUX_DATA_REG("PNDR", 0xffe70038, 8) {
+		PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA,
+		PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA }
+	},
+	{ PINMUX_DATA_REG("PPDR", 0xffe7003a, 8) {
+		0, 0, PP5_DATA, PP4_DATA,
+		PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA }
+	},
+	{ PINMUX_DATA_REG("PQDR", 0xffe7003c, 8) {
+		0, 0, 0, PQ4_DATA,
+		PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PRDR", 0xffe7003e, 8) {
+		0, 0, 0, 0,
+		PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7785_pinmux_info = {
+	.name = "sh7785_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PA7,
+	.last_gpio = GPIO_FN_IRQOUT,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return register_pinmux(&sh7785_pinmux_info);
+}
+
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index e5e0684..b8869aa 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -1,7 +1,7 @@
 /*
  * SH-X3 SMP
  *
- *  Copyright (C) 2007  Paul Mundt
+ *  Copyright (C) 2007 - 2008  Paul Mundt
  *  Copyright (C) 2007  Magnus Damm
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,6 +14,22 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
+static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
+{
+	unsigned int message = (unsigned int)(long)arg;
+	unsigned int cpu = hard_smp_processor_id();
+	unsigned int offs = 4 * cpu;
+	unsigned int x;
+
+	x = ctrl_inl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
+	x &= (1 << (message << 2));
+	ctrl_outl(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
+
+	smp_message_recv(message);
+
+	return IRQ_HANDLED;
+}
+
 void __init plat_smp_setup(void)
 {
 	unsigned int cpu = 0;
@@ -40,6 +56,13 @@ void __init plat_smp_setup(void)
 
 void __init plat_prepare_cpus(unsigned int max_cpus)
 {
+	int i;
+
+	BUILD_BUG_ON(SMP_MSG_NR >= 8);
+
+	for (i = 0; i < SMP_MSG_NR; i++)
+		request_irq(104 + i, ipi_interrupt_handler, IRQF_DISABLED,
+			    "IPI", (void *)(long)i);
 }
 
 #define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
@@ -59,7 +82,7 @@ void plat_start_cpu(unsigned int cpu, unsigned long entry_point)
 		ctrl_outl(STBCR_MSTP, STBCR_REG(cpu));
 
 	while (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP))
-		;
+		cpu_relax();
 
 	/* Start up secondary processor by sending a reset */
 	ctrl_outl(STBCR_AP_VAL, STBCR_REG(cpu));
@@ -75,46 +98,6 @@ void plat_send_ipi(unsigned int cpu, unsigned int message)
 	unsigned long addr = 0xfe410070 + (cpu * 4);
 
 	BUG_ON(cpu >= 4);
-	BUG_ON(message >= SMP_MSG_NR);
 
 	ctrl_outl(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
 }
-
-struct ipi_data {
-	void (*handler)(void *);
-	void *arg;
-	unsigned int message;
-};
-
-static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
-{
-	struct ipi_data *id = arg;
-	unsigned int cpu = hard_smp_processor_id();
-	unsigned int offs = 4 * cpu;
-	unsigned int x;
-
-	x = ctrl_inl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
-	x &= (1 << (id->message << 2));
-	ctrl_outl(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
-
-	id->handler(id->arg);
-
-	return IRQ_HANDLED;
-}
-
-static struct ipi_data ipi_handlers[SMP_MSG_NR];
-
-int plat_register_ipi_handler(unsigned int message,
-			      void (*handler)(void *), void *arg)
-{
-	struct ipi_data *id = &ipi_handlers[message];
-
-	BUG_ON(SMP_MSG_NR >= 8);
-	BUG_ON(message >= SMP_MSG_NR);
-
-	id->handler = handler;
-	id->arg = arg;
-	id->message = message;
-
-	return request_irq(104 + message, ipi_interrupt_handler, 0, "IPI", id);
-}
diff --git a/arch/sh/kernel/cpu/sh5/Makefile b/arch/sh/kernel/cpu/sh5/Makefile
index 8646363..ce4602e 100644
--- a/arch/sh/kernel/cpu/sh5/Makefile
+++ b/arch/sh/kernel/cpu/sh5/Makefile
@@ -5,3 +5,8 @@ obj-y := entry.o probe.o switchto.o
 
 obj-$(CONFIG_SH_FPU)		+= fpu.o
 obj-$(CONFIG_KALLSYMS)		+= unwind.o
+
+# Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SH5)		:= clock-sh5.o
+
+obj-y			+= $(clock-y)
diff --git a/arch/sh/kernel/cpu/sh5/clock-sh5.c b/arch/sh/kernel/cpu/sh5/clock-sh5.c
new file mode 100644
index 0000000..52c4924
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh5/clock-sh5.c
@@ -0,0 +1,79 @@
+/*
+ * arch/sh/kernel/cpu/sh5/clock-sh5.c
+ *
+ * SH-5 support for the clock framework
+ *
+ *  Copyright (C) 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+
+static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
+
+/* Clock, Power and Reset Controller */
+#define	CPRC_BLOCK_OFF	0x01010000
+#define CPRC_BASE	(PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF)
+
+static unsigned long cprc_base;
+
+static void master_clk_init(struct clk *clk)
+{
+	int idx = (ctrl_inl(cprc_base + 0x00) >> 6) & 0x0007;
+	clk->rate *= ifc_table[idx];
+}
+
+static struct clk_ops sh5_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inw(cprc_base) >> 12) & 0x0007;
+	clk->rate = clk->parent->rate / ifc_table[idx];
+}
+
+static struct clk_ops sh5_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inw(cprc_base) >> 3) & 0x0007;
+	clk->rate = clk->parent->rate / ifc_table[idx];
+}
+
+static struct clk_ops sh5_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inw(cprc_base) & 0x0007);
+	clk->rate = clk->parent->rate / ifc_table[idx];
+}
+
+static struct clk_ops sh5_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh5_clk_ops[] = {
+	&sh5_master_clk_ops,
+	&sh5_module_clk_ops,
+	&sh5_bus_clk_ops,
+	&sh5_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
+	BUG_ON(!cprc_base);
+
+	if (idx < ARRAY_SIZE(sh5_clk_ops))
+		*ops = sh5_clk_ops[idx];
+}
diff --git a/arch/sh/kernel/crash_dump.c b/arch/sh/kernel/crash_dump.c
index 4a2ecbe..95d2162 100644
--- a/arch/sh/kernel/crash_dump.c
+++ b/arch/sh/kernel/crash_dump.c
@@ -10,6 +10,9 @@
 #include <linux/io.h>
 #include <asm/uaccess.h>
 
+/* Stores the physical address of elf header of crash image. */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+
 /**
  * copy_oldmem_page - copy one page from "oldmem"
  * @pfn: page frame number to be copied
diff --git a/arch/sh/kernel/dump_task.c b/arch/sh/kernel/dump_task.c
deleted file mode 100644
index 1db7ce0..0000000
--- a/arch/sh/kernel/dump_task.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <linux/elfcore.h>
-#include <linux/sched.h>
-#include <asm/fpu.h>
-
-/*
- * Capture the user space registers if the task is not running (in user space)
- */
-int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
-{
-	struct pt_regs ptregs;
-
-	ptregs = *task_pt_regs(tsk);
-	elf_core_copy_regs(regs, &ptregs);
-
-	return 1;
-}
-
-int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpu)
-{
-	int fpvalid = 0;
-
-#if defined(CONFIG_SH_FPU)
-	fpvalid = !!tsk_used_math(tsk);
-	if (fpvalid) {
-		unlazy_fpu(tsk, task_pt_regs(tsk));
-		memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu));
-	}
-#endif
-
-	return fpvalid;
-}
-
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index efbb426..1a5cf9d 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -371,3 +371,47 @@ syscall_exit:
 #endif
 7:	.long	do_syscall_trace_enter
 8:	.long	do_syscall_trace_leave
+
+#ifdef CONFIG_FTRACE
+	.align 2
+	.globl	_mcount
+	.type	_mcount,@function
+	.globl	mcount
+	.type	mcount,@function
+_mcount:
+mcount:
+	mov.l	r4, @-r15
+	mov.l	r5, @-r15
+	mov.l	r6, @-r15
+	mov.l	r7, @-r15
+	sts.l	pr, @-r15
+
+	mov.l	@(20,r15),r4
+	sts	pr, r5
+
+	mov.l	1f, r6
+	mov.l	ftrace_stub, r7	
+	cmp/eq	r6, r7
+	bt	skip_trace
+
+	mov.l	@r6, r6
+	jsr	@r6
+	 nop
+
+skip_trace:
+
+	lds.l	@r15+, pr
+	mov.l	@r15+, r7
+	mov.l	@r15+, r6
+	mov.l	@r15+, r5
+	rts
+	 mov.l	@r15+, r4
+
+	.align 2
+1:	.long	ftrace_trace_function
+
+	.globl	ftrace_stub
+ftrace_stub:
+	rts
+	 nop
+#endif /* CONFIG_FTRACE */
diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c
new file mode 100644
index 0000000..d371653
--- /dev/null
+++ b/arch/sh/kernel/gpio.c
@@ -0,0 +1,502 @@
+/*
+ * Pinmuxed GPIO support for SuperH.
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+
+static struct pinmux_info *registered_gpio;
+
+static struct pinmux_info *gpio_controller(unsigned gpio)
+{
+	if (!registered_gpio)
+		return NULL;
+
+	if (gpio < registered_gpio->first_gpio)
+		return NULL;
+
+	if (gpio > registered_gpio->last_gpio)
+		return NULL;
+
+	return registered_gpio;
+}
+
+static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r)
+{
+	if (enum_id < r->begin)
+		return 0;
+
+	if (enum_id > r->end)
+		return 0;
+
+	return 1;
+}
+
+static int read_write_reg(unsigned long reg, unsigned long reg_width,
+			  unsigned long field_width, unsigned long in_pos,
+			  unsigned long value, int do_write)
+{
+	unsigned long data, mask, pos;
+
+	data = 0;
+	mask = (1 << field_width) - 1;
+	pos = reg_width - ((in_pos + 1) * field_width);
+
+#ifdef DEBUG
+	pr_info("%s, addr = %lx, value = %ld, pos = %ld, "
+		"r_width = %ld, f_width = %ld\n",
+		do_write ? "write" : "read", reg, value, pos,
+		reg_width, field_width);
+#endif
+
+	switch (reg_width) {
+	case 8:
+		data = ctrl_inb(reg);
+		break;
+	case 16:
+		data = ctrl_inw(reg);
+		break;
+	case 32:
+		data = ctrl_inl(reg);
+		break;
+	}
+
+	if (!do_write)
+		return (data >> pos) & mask;
+
+	data &= ~(mask << pos);
+	data |= value << pos;
+
+	switch (reg_width) {
+	case 8:
+		ctrl_outb(data, reg);
+		break;
+	case 16:
+		ctrl_outw(data, reg);
+		break;
+	case 32:
+		ctrl_outl(data, reg);
+		break;
+	}
+	return 0;
+}
+
+static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio,
+			struct pinmux_data_reg **drp, int *bitp)
+{
+	pinmux_enum_t enum_id = gpioc->gpios[gpio].enum_id;
+	struct pinmux_data_reg *data_reg;
+	int k, n;
+
+	if (!enum_in_range(enum_id, &gpioc->data))
+		return -1;
+
+	k = 0;
+	while (1) {
+		data_reg = gpioc->data_regs + k;
+
+		if (!data_reg->reg_width)
+			break;
+
+		for (n = 0; n < data_reg->reg_width; n++) {
+			if (data_reg->enum_ids[n] == enum_id) {
+				*drp = data_reg;
+				*bitp = n;
+				return 0;
+
+			}
+		}
+		k++;
+	}
+
+	return -1;
+}
+
+static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id,
+			  struct pinmux_cfg_reg **crp, int *indexp,
+			  unsigned long **cntp)
+{
+	struct pinmux_cfg_reg *config_reg;
+	unsigned long r_width, f_width;
+	int k, n;
+
+	k = 0;
+	while (1) {
+		config_reg = gpioc->cfg_regs + k;
+
+		r_width = config_reg->reg_width;
+		f_width = config_reg->field_width;
+
+		if (!r_width)
+			break;
+		for (n = 0; n < (r_width / f_width) * 1 << f_width; n++) {
+			if (config_reg->enum_ids[n] == enum_id) {
+				*crp = config_reg;
+				*indexp = n;
+				*cntp = &config_reg->cnt[n / (1 << f_width)];
+				return 0;
+			}
+		}
+		k++;
+	}
+
+	return -1;
+}
+
+static int get_gpio_enum_id(struct pinmux_info *gpioc, unsigned gpio,
+			    int pos, pinmux_enum_t *enum_idp)
+{
+	pinmux_enum_t enum_id = gpioc->gpios[gpio].enum_id;
+	pinmux_enum_t *data = gpioc->gpio_data;
+	int k;
+
+	if (!enum_in_range(enum_id, &gpioc->data)) {
+		if (!enum_in_range(enum_id, &gpioc->mark)) {
+			pr_err("non data/mark enum_id for gpio %d\n", gpio);
+			return -1;
+		}
+	}
+
+	if (pos) {
+		*enum_idp = data[pos + 1];
+		return pos + 1;
+	}
+
+	for (k = 0; k < gpioc->gpio_data_size; k++) {
+		if (data[k] == enum_id) {
+			*enum_idp = data[k + 1];
+			return k + 1;
+		}
+	}
+
+	pr_err("cannot locate data/mark enum_id for gpio %d\n", gpio);
+	return -1;
+}
+
+static int write_config_reg(struct pinmux_info *gpioc,
+			    struct pinmux_cfg_reg *crp,
+			    int index)
+{
+	unsigned long ncomb, pos, value;
+
+	ncomb = 1 << crp->field_width;
+	pos = index / ncomb;
+	value = index % ncomb;
+
+	return read_write_reg(crp->reg, crp->reg_width,
+			      crp->field_width, pos, value, 1);
+}
+
+static int check_config_reg(struct pinmux_info *gpioc,
+			    struct pinmux_cfg_reg *crp,
+			    int index)
+{
+	unsigned long ncomb, pos, value;
+
+	ncomb = 1 << crp->field_width;
+	pos = index / ncomb;
+	value = index % ncomb;
+
+	if (read_write_reg(crp->reg, crp->reg_width,
+			   crp->field_width, pos, 0, 0) == value)
+		return 0;
+
+	return -1;
+}
+
+enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE };
+
+int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
+		       int pinmux_type, int cfg_mode)
+{
+	struct pinmux_cfg_reg *cr = NULL;
+	pinmux_enum_t enum_id;
+	struct pinmux_range *range;
+	int in_range, pos, index;
+	unsigned long *cntp;
+
+	switch (pinmux_type) {
+
+	case PINMUX_TYPE_FUNCTION:
+		range = NULL;
+		break;
+
+	case PINMUX_TYPE_OUTPUT:
+		range = &gpioc->output;
+		break;
+
+	case PINMUX_TYPE_INPUT:
+		range = &gpioc->input;
+		break;
+
+	case PINMUX_TYPE_INPUT_PULLUP:
+		range = &gpioc->input_pu;
+		break;
+
+	case PINMUX_TYPE_INPUT_PULLDOWN:
+		range = &gpioc->input_pd;
+		break;
+
+	default:
+		goto out_err;
+	}
+
+	pos = 0;
+	enum_id = 0;
+	index = 0;
+	while (1) {
+		pos = get_gpio_enum_id(gpioc, gpio, pos, &enum_id);
+		if (pos <= 0)
+			goto out_err;
+
+		if (!enum_id)
+			break;
+
+		in_range = enum_in_range(enum_id, &gpioc->function);
+		if (!in_range && range) {
+			in_range = enum_in_range(enum_id, range);
+
+			if (in_range && enum_id == range->force)
+				continue;
+		}
+
+		if (!in_range)
+			continue;
+
+		if (get_config_reg(gpioc, enum_id, &cr, &index, &cntp) != 0)
+			goto out_err;
+
+		switch (cfg_mode) {
+		case GPIO_CFG_DRYRUN:
+			if (!*cntp || !check_config_reg(gpioc, cr, index))
+				continue;
+			break;
+
+		case GPIO_CFG_REQ:
+			if (write_config_reg(gpioc, cr, index) != 0)
+				goto out_err;
+			*cntp = *cntp + 1;
+			break;
+
+		case GPIO_CFG_FREE:
+			*cntp = *cntp - 1;
+			break;
+		}
+	}
+
+	return 0;
+ out_err:
+	return -1;
+}
+
+static DEFINE_SPINLOCK(gpio_lock);
+
+int __gpio_request(unsigned gpio)
+{
+	struct pinmux_info *gpioc = gpio_controller(gpio);
+	struct pinmux_data_reg *dummy;
+	unsigned long flags;
+	int i, ret, pinmux_type;
+
+	ret = -EINVAL;
+
+	if (!gpioc)
+		goto err_out;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	if ((gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE)
+		goto err_unlock;
+
+	/* setup pin function here if no data is associated with pin */
+
+	if (get_data_reg(gpioc, gpio, &dummy, &i) != 0)
+		pinmux_type = PINMUX_TYPE_FUNCTION;
+	else
+		pinmux_type = PINMUX_TYPE_GPIO;
+
+	if (pinmux_type == PINMUX_TYPE_FUNCTION) {
+		if (pinmux_config_gpio(gpioc, gpio,
+				       pinmux_type,
+				       GPIO_CFG_DRYRUN) != 0)
+			goto err_unlock;
+
+		if (pinmux_config_gpio(gpioc, gpio,
+				       pinmux_type,
+				       GPIO_CFG_REQ) != 0)
+			BUG();
+	}
+
+	gpioc->gpios[gpio].flags = pinmux_type;
+
+	ret = 0;
+ err_unlock:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+ err_out:
+	return ret;
+}
+EXPORT_SYMBOL(__gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	struct pinmux_info *gpioc = gpio_controller(gpio);
+	unsigned long flags;
+	int pinmux_type;
+
+	if (!gpioc)
+		return;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE;
+	pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE);
+	gpioc->gpios[gpio].flags = PINMUX_TYPE_NONE;
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(gpio_free);
+
+static int pinmux_direction(struct pinmux_info *gpioc,
+			    unsigned gpio, int new_pinmux_type)
+{
+	int ret, pinmux_type;
+
+	ret = -EINVAL;
+	pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE;
+
+	switch (pinmux_type) {
+	case PINMUX_TYPE_GPIO:
+		break;
+	case PINMUX_TYPE_OUTPUT:
+	case PINMUX_TYPE_INPUT:
+	case PINMUX_TYPE_INPUT_PULLUP:
+	case PINMUX_TYPE_INPUT_PULLDOWN:
+		pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE);
+		break;
+	default:
+		goto err_out;
+	}
+
+	if (pinmux_config_gpio(gpioc, gpio,
+			       new_pinmux_type,
+			       GPIO_CFG_DRYRUN) != 0)
+		goto err_out;
+
+	if (pinmux_config_gpio(gpioc, gpio,
+			       new_pinmux_type,
+			       GPIO_CFG_REQ) != 0)
+		BUG();
+
+	gpioc->gpios[gpio].flags = new_pinmux_type;
+
+	ret = 0;
+ err_out:
+	return ret;
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+	struct pinmux_info *gpioc = gpio_controller(gpio);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (!gpioc)
+		goto err_out;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_INPUT);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+ err_out:
+	return ret;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+static int __gpio_get_set_value(struct pinmux_info *gpioc,
+				unsigned gpio, int value,
+				int do_write)
+{
+	struct pinmux_data_reg *dr = NULL;
+	int bit = 0;
+
+	if (get_data_reg(gpioc, gpio, &dr, &bit) != 0)
+		BUG();
+	else
+		value = read_write_reg(dr->reg, dr->reg_width,
+				       1, bit, !!value, do_write);
+
+	return value;
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	struct pinmux_info *gpioc = gpio_controller(gpio);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (!gpioc)
+		goto err_out;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	__gpio_get_set_value(gpioc, gpio, value, 1);
+	ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_OUTPUT);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+ err_out:
+	return ret;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+int gpio_get_value(unsigned gpio)
+{
+	struct pinmux_info *gpioc = gpio_controller(gpio);
+	unsigned long flags;
+	int value = 0;
+
+	if (!gpioc)
+		BUG();
+	else {
+		spin_lock_irqsave(&gpio_lock, flags);
+		value = __gpio_get_set_value(gpioc, gpio, 0, 0);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	}
+
+	return value;
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned gpio, int value)
+{
+	struct pinmux_info *gpioc = gpio_controller(gpio);
+	unsigned long flags;
+
+	if (!gpioc)
+		BUG();
+	else {
+		spin_lock_irqsave(&gpio_lock, flags);
+		__gpio_get_set_value(gpioc, gpio, value, 1);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	}
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int register_pinmux(struct pinmux_info *pip)
+{
+	registered_gpio = pip;
+	pr_info("pinmux: %s handling gpio %d -> %d\n",
+		pip->name, pip->first_gpio, pip->last_gpio);
+
+	return 0;
+}
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 2b89912..29cf458 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -19,12 +19,12 @@
  * Copy data from IO memory space to "real" memory space.
  * This needs to be optimized.
  */
-void memcpy_fromio(void *to, volatile void __iomem *from, unsigned long count)
+void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned long count)
 {
-	char *p = to;
+	unsigned char *p = to;
         while (count) {
                 count--;
-                *p = readb((void __iomem *)from);
+                *p = readb(from);
                 p++;
                 from++;
         }
@@ -37,10 +37,10 @@ EXPORT_SYMBOL(memcpy_fromio);
  */
 void memcpy_toio(volatile void __iomem *to, const void *from, unsigned long count)
 {
-	const char *p = from;
+	const unsigned char *p = from;
         while (count) {
                 count--;
-                writeb(*p, (void __iomem *)to);
+                writeb(*p, to);
                 p++;
                 to++;
         }
@@ -55,7 +55,7 @@ void memset_io(volatile void __iomem *dst, int c, unsigned long count)
 {
         while (count) {
                 count--;
-                writeb(c, (void __iomem *)dst);
+                writeb(c, dst);
                 dst++;
         }
 }
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index db76944..5a7f554 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -19,38 +19,33 @@
 /* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a
  * workaround. */
 /* I'm not sure SH7709 has this kind of bug */
-#define dummy_read()	ctrl_inb(0xba000000)
+#define dummy_read()	__raw_readb(0xba000000)
 #else
 #define dummy_read()
 #endif
 
 unsigned long generic_io_base;
 
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
-
 u8 generic_inb(unsigned long port)
 {
-	return ctrl_inb((unsigned long __force)__ioport_map(port, 1));
+	return __raw_readb(__ioport_map(port, 1));
 }
 
 u16 generic_inw(unsigned long port)
 {
-	return ctrl_inw((unsigned long __force)__ioport_map(port, 2));
+	return __raw_readw(__ioport_map(port, 2));
 }
 
 u32 generic_inl(unsigned long port)
 {
-	return ctrl_inl((unsigned long __force)__ioport_map(port, 4));
+	return __raw_readl(__ioport_map(port, 4));
 }
 
 u8 generic_inb_p(unsigned long port)
 {
 	unsigned long v = generic_inb(port);
 
-	delay();
+	ctrl_delay();
 	return v;
 }
 
@@ -58,7 +53,7 @@ u16 generic_inw_p(unsigned long port)
 {
 	unsigned long v = generic_inw(port);
 
-	delay();
+	ctrl_delay();
 	return v;
 }
 
@@ -66,7 +61,7 @@ u32 generic_inl_p(unsigned long port)
 {
 	unsigned long v = generic_inl(port);
 
-	delay();
+	ctrl_delay();
 	return v;
 }
 
@@ -81,7 +76,7 @@ void generic_insb(unsigned long port, void *dst, unsigned long count)
 	volatile u8 *port_addr;
 	u8 *buf = dst;
 
-	port_addr = (volatile u8 *)__ioport_map(port, 1);
+	port_addr = (volatile u8 __force *)__ioport_map(port, 1);
 	while (count--)
 		*buf++ = *port_addr;
 }
@@ -91,7 +86,7 @@ void generic_insw(unsigned long port, void *dst, unsigned long count)
 	volatile u16 *port_addr;
 	u16 *buf = dst;
 
-	port_addr = (volatile u16 *)__ioport_map(port, 2);
+	port_addr = (volatile u16 __force *)__ioport_map(port, 2);
 	while (count--)
 		*buf++ = *port_addr;
 
@@ -103,7 +98,7 @@ void generic_insl(unsigned long port, void *dst, unsigned long count)
 	volatile u32 *port_addr;
 	u32 *buf = dst;
 
-	port_addr = (volatile u32 *)__ioport_map(port, 4);
+	port_addr = (volatile u32 __force *)__ioport_map(port, 4);
 	while (count--)
 		*buf++ = *port_addr;
 
@@ -112,35 +107,35 @@ void generic_insl(unsigned long port, void *dst, unsigned long count)
 
 void generic_outb(u8 b, unsigned long port)
 {
-	ctrl_outb(b, (unsigned long __force)__ioport_map(port, 1));
+	__raw_writeb(b, __ioport_map(port, 1));
 }
 
 void generic_outw(u16 b, unsigned long port)
 {
-	ctrl_outw(b, (unsigned long __force)__ioport_map(port, 2));
+	__raw_writew(b, __ioport_map(port, 2));
 }
 
 void generic_outl(u32 b, unsigned long port)
 {
-	ctrl_outl(b, (unsigned long __force)__ioport_map(port, 4));
+	__raw_writel(b, __ioport_map(port, 4));
 }
 
 void generic_outb_p(u8 b, unsigned long port)
 {
 	generic_outb(b, port);
-	delay();
+	ctrl_delay();
 }
 
 void generic_outw_p(u16 b, unsigned long port)
 {
 	generic_outw(b, port);
-	delay();
+	ctrl_delay();
 }
 
 void generic_outl_p(u32 b, unsigned long port)
 {
 	generic_outl(b, port);
-	delay();
+	ctrl_delay();
 }
 
 /*
@@ -184,36 +179,6 @@ void generic_outsl(unsigned long port, const void *src, unsigned long count)
 	dummy_read();
 }
 
-u8 generic_readb(void __iomem *addr)
-{
-	return ctrl_inb((unsigned long __force)addr);
-}
-
-u16 generic_readw(void __iomem *addr)
-{
-	return ctrl_inw((unsigned long __force)addr);
-}
-
-u32 generic_readl(void __iomem *addr)
-{
-	return ctrl_inl((unsigned long __force)addr);
-}
-
-void generic_writeb(u8 b, void __iomem *addr)
-{
-	ctrl_outb(b, (unsigned long __force)addr);
-}
-
-void generic_writew(u16 b, void __iomem *addr)
-{
-	ctrl_outw(b, (unsigned long __force)addr);
-}
-
-void generic_writel(u32 b, void __iomem *addr)
-{
-	ctrl_outl(b, (unsigned long __force)addr);
-}
-
 void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
 {
 	return (void __iomem *)(addr + generic_io_base);
diff --git a/arch/sh/kernel/kprobes.c b/arch/sh/kernel/kprobes.c
new file mode 100644
index 0000000..c96850b
--- /dev/null
+++ b/arch/sh/kernel/kprobes.c
@@ -0,0 +1,584 @@
+/*
+ * Kernel probes (kprobes) for SuperH
+ *
+ * Copyright (C) 2007 Chris Smith <chris.smith@st.com>
+ * Copyright (C) 2006 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/preempt.h>
+#include <linux/kdebug.h>
+#include <asm/cacheflush.h>
+#include <asm/uaccess.h>
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+static struct kprobe saved_current_opcode;
+static struct kprobe saved_next_opcode;
+static struct kprobe saved_next_opcode2;
+
+#define OPCODE_JMP(x)	(((x) & 0xF0FF) == 0x402b)
+#define OPCODE_JSR(x)	(((x) & 0xF0FF) == 0x400b)
+#define OPCODE_BRA(x)	(((x) & 0xF000) == 0xa000)
+#define OPCODE_BRAF(x)	(((x) & 0xF0FF) == 0x0023)
+#define OPCODE_BSR(x)	(((x) & 0xF000) == 0xb000)
+#define OPCODE_BSRF(x)	(((x) & 0xF0FF) == 0x0003)
+
+#define OPCODE_BF_S(x)	(((x) & 0xFF00) == 0x8f00)
+#define OPCODE_BT_S(x)	(((x) & 0xFF00) == 0x8d00)
+
+#define OPCODE_BF(x)	(((x) & 0xFF00) == 0x8b00)
+#define OPCODE_BT(x)	(((x) & 0xFF00) == 0x8900)
+
+#define OPCODE_RTS(x)	(((x) & 0x000F) == 0x000b)
+#define OPCODE_RTE(x)	(((x) & 0xFFFF) == 0x002b)
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	kprobe_opcode_t opcode = *(kprobe_opcode_t *) (p->addr);
+
+	if (OPCODE_RTE(opcode))
+		return -EFAULT;	/* Bad breakpoint */
+
+	p->opcode = opcode;
+
+	return 0;
+}
+
+void __kprobes arch_copy_kprobe(struct kprobe *p)
+{
+	memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+	p->opcode = *p->addr;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	*p->addr = BREAKPOINT_INSTRUCTION;
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+	*p->addr = p->opcode;
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	if (*p->addr == BREAKPOINT_INSTRUCTION)
+		return 1;
+
+	return 0;
+}
+
+/**
+ * If an illegal slot instruction exception occurs for an address
+ * containing a kprobe, remove the probe.
+ *
+ * Returns 0 if the exception was handled successfully, 1 otherwise.
+ */
+int __kprobes kprobe_handle_illslot(unsigned long pc)
+{
+	struct kprobe *p = get_kprobe((kprobe_opcode_t *) pc + 1);
+
+	if (p != NULL) {
+		printk("Warning: removing kprobe from delay slot: 0x%.8x\n",
+		       (unsigned int)pc + 2);
+		unregister_kprobe(p);
+		return 0;
+	}
+
+	return 1;
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+	if (saved_next_opcode.addr != 0x0) {
+		arch_disarm_kprobe(p);
+		arch_disarm_kprobe(&saved_next_opcode);
+		saved_next_opcode.addr = 0x0;
+		saved_next_opcode.opcode = 0x0;
+
+		if (saved_next_opcode2.addr != 0x0) {
+			arch_disarm_kprobe(&saved_next_opcode2);
+			saved_next_opcode2.addr = 0x0;
+			saved_next_opcode2.opcode = 0x0;
+		}
+	}
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+					 struct kprobe_ctlblk *kcb)
+{
+	__get_cpu_var(current_kprobe) = p;
+}
+
+/*
+ * Singlestep is implemented by disabling the current kprobe and setting one
+ * on the next instruction, following branches. Two probes are set if the
+ * branch is conditional.
+ */
+static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+	kprobe_opcode_t *addr = NULL;
+	saved_current_opcode.addr = (kprobe_opcode_t *) (regs->pc);
+	addr = saved_current_opcode.addr;
+
+	if (p != NULL) {
+		arch_disarm_kprobe(p);
+
+		if (OPCODE_JSR(p->opcode) || OPCODE_JMP(p->opcode)) {
+			unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
+			saved_next_opcode.addr =
+			    (kprobe_opcode_t *) regs->regs[reg_nr];
+		} else if (OPCODE_BRA(p->opcode) || OPCODE_BSR(p->opcode)) {
+			unsigned long disp = (p->opcode & 0x0FFF);
+			saved_next_opcode.addr =
+			    (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
+
+		} else if (OPCODE_BRAF(p->opcode) || OPCODE_BSRF(p->opcode)) {
+			unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
+			saved_next_opcode.addr =
+			    (kprobe_opcode_t *) (regs->pc + 4 +
+						 regs->regs[reg_nr]);
+
+		} else if (OPCODE_RTS(p->opcode)) {
+			saved_next_opcode.addr = (kprobe_opcode_t *) regs->pr;
+
+		} else if (OPCODE_BF(p->opcode) || OPCODE_BT(p->opcode)) {
+			unsigned long disp = (p->opcode & 0x00FF);
+			/* case 1 */
+			saved_next_opcode.addr = p->addr + 1;
+			/* case 2 */
+			saved_next_opcode2.addr =
+			    (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
+			saved_next_opcode2.opcode = *(saved_next_opcode2.addr);
+			arch_arm_kprobe(&saved_next_opcode2);
+
+		} else if (OPCODE_BF_S(p->opcode) || OPCODE_BT_S(p->opcode)) {
+			unsigned long disp = (p->opcode & 0x00FF);
+			/* case 1 */
+			saved_next_opcode.addr = p->addr + 2;
+			/* case 2 */
+			saved_next_opcode2.addr =
+			    (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
+			saved_next_opcode2.opcode = *(saved_next_opcode2.addr);
+			arch_arm_kprobe(&saved_next_opcode2);
+
+		} else {
+			saved_next_opcode.addr = p->addr + 1;
+		}
+
+		saved_next_opcode.opcode = *(saved_next_opcode.addr);
+		arch_arm_kprobe(&saved_next_opcode);
+	}
+}
+
+/* Called with kretprobe_lock held */
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				      struct pt_regs *regs)
+{
+	ri->ret_addr = (kprobe_opcode_t *) regs->pr;
+
+	/* Replace the return addr with trampoline addr */
+	regs->pr = (unsigned long)kretprobe_trampoline;
+}
+
+static int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *p;
+	int ret = 0;
+	kprobe_opcode_t *addr = NULL;
+	struct kprobe_ctlblk *kcb;
+
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing
+	 */
+	preempt_disable();
+	kcb = get_kprobe_ctlblk();
+
+	addr = (kprobe_opcode_t *) (regs->pc);
+
+	/* Check we're not actually recursing */
+	if (kprobe_running()) {
+		p = get_kprobe(addr);
+		if (p) {
+			if (kcb->kprobe_status == KPROBE_HIT_SS &&
+			    *p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
+				goto no_kprobe;
+			}
+			/* We have reentered the kprobe_handler(), since
+			 * another probe was hit while within the handler.
+			 * We here save the original kprobes variables and
+			 * just single step on the instruction of the new probe
+			 * without calling any user handlers.
+			 */
+			save_previous_kprobe(kcb);
+			set_current_kprobe(p, regs, kcb);
+			kprobes_inc_nmissed_count(p);
+			prepare_singlestep(p, regs);
+			kcb->kprobe_status = KPROBE_REENTER;
+			return 1;
+		} else {
+			p = __get_cpu_var(current_kprobe);
+			if (p->break_handler && p->break_handler(p, regs)) {
+				goto ss_probe;
+			}
+		}
+		goto no_kprobe;
+	}
+
+	p = get_kprobe(addr);
+	if (!p) {
+		/* Not one of ours: let kernel handle it */
+		if (*(kprobe_opcode_t *)addr != BREAKPOINT_INSTRUCTION) {
+			/*
+			 * The breakpoint instruction was removed right
+			 * after we hit it. Another cpu has removed
+			 * either a probepoint or a debugger breakpoint
+			 * at this address. In either case, no further
+			 * handling of this interrupt is appropriate.
+			 */
+			ret = 1;
+		}
+
+		goto no_kprobe;
+	}
+
+	set_current_kprobe(p, regs, kcb);
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+	if (p->pre_handler && p->pre_handler(p, regs))
+		/* handler has already set things up, so skip ss setup */
+		return 1;
+
+ss_probe:
+	prepare_singlestep(p, regs);
+	kcb->kprobe_status = KPROBE_HIT_SS;
+	return 1;
+
+no_kprobe:
+	preempt_enable_no_resched();
+	return ret;
+}
+
+/*
+ * For function-return probes, init_kprobes() establishes a probepoint
+ * here. When a retprobed function returns, this probe is hit and
+ * trampoline_probe_handler() runs, calling the kretprobe's handler.
+ */
+static void __used kretprobe_trampoline_holder(void)
+{
+	asm volatile (".globl kretprobe_trampoline\n"
+		      "kretprobe_trampoline:\n\t"
+		      "nop\n");
+}
+
+/*
+ * Called when we hit the probe point at kretprobe_trampoline
+ */
+int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kretprobe_instance *ri = NULL;
+	struct hlist_head *head, empty_rp;
+	struct hlist_node *node, *tmp;
+	unsigned long flags, orig_ret_address = 0;
+	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+
+	INIT_HLIST_HEAD(&empty_rp);
+	kretprobe_hash_lock(current, &head, &flags);
+
+	/*
+	 * It is possible to have multiple instances associated with a given
+	 * task either because an multiple functions in the call path
+	 * have a return probe installed on them, and/or more then one return
+	 * return probe was registered for a target function.
+	 *
+	 * We can handle this because:
+	 *     - instances are always inserted at the head of the list
+	 *     - when multiple return probes are registered for the same
+	 *       function, the first instance's ret_addr will point to the
+	 *       real return address, and all the rest will point to
+	 *       kretprobe_trampoline
+	 */
+	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		if (ri->rp && ri->rp->handler) {
+			__get_cpu_var(current_kprobe) = &ri->rp->kp;
+			ri->rp->handler(ri, regs);
+			__get_cpu_var(current_kprobe) = NULL;
+		}
+
+		orig_ret_address = (unsigned long)ri->ret_addr;
+		recycle_rp_inst(ri, &empty_rp);
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+	regs->pc = orig_ret_address;
+	kretprobe_hash_unlock(current, &flags);
+
+	preempt_enable_no_resched();
+
+	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
+		hlist_del(&ri->hlist);
+		kfree(ri);
+	}
+
+	return orig_ret_address;
+}
+
+static int __kprobes post_kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	kprobe_opcode_t *addr = NULL;
+	struct kprobe *p = NULL;
+
+	if (!cur)
+		return 0;
+
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
+	}
+
+	if (saved_next_opcode.addr != 0x0) {
+		arch_disarm_kprobe(&saved_next_opcode);
+		saved_next_opcode.addr = 0x0;
+		saved_next_opcode.opcode = 0x0;
+
+		addr = saved_current_opcode.addr;
+		saved_current_opcode.addr = 0x0;
+
+		p = get_kprobe(addr);
+		arch_arm_kprobe(p);
+
+		if (saved_next_opcode2.addr != 0x0) {
+			arch_disarm_kprobe(&saved_next_opcode2);
+			saved_next_opcode2.addr = 0x0;
+			saved_next_opcode2.opcode = 0x0;
+		}
+	}
+
+	/* Restore back the original saved kprobes variables and continue. */
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
+		goto out;
+	}
+
+	reset_current_kprobe();
+
+out:
+	preempt_enable_no_resched();
+
+	return 1;
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	const struct exception_table_entry *entry;
+
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		/*
+		 * We are here because the instruction being single
+		 * stepped caused a page fault. We reset the current
+		 * kprobe, point the pc back to the probe address
+		 * and allow the page fault handler to continue as a
+		 * normal page fault.
+		 */
+		regs->pc = (unsigned long)cur->addr;
+		if (kcb->kprobe_status == KPROBE_REENTER)
+			restore_previous_kprobe(kcb);
+		else
+			reset_current_kprobe();
+		preempt_enable_no_resched();
+		break;
+	case KPROBE_HIT_ACTIVE:
+	case KPROBE_HIT_SSDONE:
+		/*
+		 * We increment the nmissed count for accounting,
+		 * we can also use npre/npostfault count for accounting
+		 * these specific fault cases.
+		 */
+		kprobes_inc_nmissed_count(cur);
+
+		/*
+		 * We come here because instructions in the pre/post
+		 * handler caused the page_fault, this could happen
+		 * if handler tries to access user space by
+		 * copy_from_user(), get_user() etc. Let the
+		 * user-specified handler try to fix it first.
+		 */
+		if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+			return 1;
+
+		/*
+		 * In case the user-specified fault handler returned
+		 * zero, try to fix up.
+		 */
+		if ((entry = search_exception_tables(regs->pc)) != NULL) {
+			regs->pc = entry->fixup;
+			return 1;
+		}
+
+		/*
+		 * fixup_exception() could not handle it,
+		 * Let do_page_fault() fix it.
+		 */
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * Wrapper routine to for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+				       unsigned long val, void *data)
+{
+	struct kprobe *p = NULL;
+	struct die_args *args = (struct die_args *)data;
+	int ret = NOTIFY_DONE;
+	kprobe_opcode_t *addr = NULL;
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	addr = (kprobe_opcode_t *) (args->regs->pc);
+	if (val == DIE_TRAP) {
+		if (!kprobe_running()) {
+			if (kprobe_handler(args->regs)) {
+				ret = NOTIFY_STOP;
+			} else {
+				/* Not a kprobe trap */
+				ret = NOTIFY_DONE;
+			}
+		} else {
+			p = get_kprobe(addr);
+			if ((kcb->kprobe_status == KPROBE_HIT_SS) ||
+			    (kcb->kprobe_status == KPROBE_REENTER)) {
+				if (post_kprobe_handler(args->regs))
+					ret = NOTIFY_STOP;
+			} else {
+				if (kprobe_handler(args->regs)) {
+					ret = NOTIFY_STOP;
+				} else {
+					p = __get_cpu_var(current_kprobe);
+					if (p->break_handler &&
+					    p->break_handler(p, args->regs))
+						ret = NOTIFY_STOP;
+				}
+			}
+		}
+	}
+
+	return ret;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct jprobe *jp = container_of(p, struct jprobe, kp);
+	unsigned long addr;
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	kcb->jprobe_saved_regs = *regs;
+	kcb->jprobe_saved_r15 = regs->regs[15];
+	addr = kcb->jprobe_saved_r15;
+
+	/*
+	 * TBD: As Linus pointed out, gcc assumes that the callee
+	 * owns the argument space and could overwrite it, e.g.
+	 * tailcall optimization. So, to be absolutely safe
+	 * we also save and restore enough stack bytes to cover
+	 * the argument area.
+	 */
+	memcpy(kcb->jprobes_stack, (kprobe_opcode_t *) addr,
+	       MIN_STACK_SIZE(addr));
+
+	regs->pc = (unsigned long)(jp->entry);
+
+	return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+	asm volatile ("trapa #0x3a\n\t" "jprobe_return_end:\n\t" "nop\n\t");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	unsigned long stack_addr = kcb->jprobe_saved_r15;
+	u8 *addr = (u8 *)regs->pc;
+
+	if ((addr >= (u8 *)jprobe_return) &&
+	    (addr <= (u8 *)jprobe_return_end)) {
+		*regs = kcb->jprobe_saved_regs;
+
+		memcpy((kprobe_opcode_t *)stack_addr, kcb->jprobes_stack,
+		       MIN_STACK_SIZE(stack_addr));
+
+		kcb->kprobe_status = KPROBE_HIT_SS;
+		preempt_enable_no_resched();
+		return 1;
+	}
+
+	return 0;
+}
+
+static struct kprobe trampoline_p = {
+	.addr = (kprobe_opcode_t *)&kretprobe_trampoline,
+	.pre_handler = trampoline_probe_handler
+};
+
+int __init arch_init_kprobes(void)
+{
+	saved_next_opcode.addr = 0x0;
+	saved_next_opcode.opcode = 0x0;
+
+	saved_current_opcode.addr = 0x0;
+	saved_current_opcode.opcode = 0x0;
+
+	saved_next_opcode2.addr = 0x0;
+	saved_next_opcode2.opcode = 0x0;
+
+	return register_kprobe(&trampoline_p);
+}
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 129b2cf..c1ea41e 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -14,6 +14,7 @@
 #include <linux/string.h>
 #include <asm/machvec.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
@@ -125,9 +126,6 @@ void __init sh_mv_setup(void)
 	mv_set(insb);	mv_set(insw);	mv_set(insl);
 	mv_set(outsb);	mv_set(outsw);	mv_set(outsl);
 
-	mv_set(readb);	mv_set(readw);	mv_set(readl);
-	mv_set(writeb);	mv_set(writew);	mv_set(writel);
-
 	mv_set(ioport_map);
 	mv_set(ioport_unmap);
 	mv_set(irq_demux);
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 3326a45..b965f02 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -7,7 +7,11 @@
  *
  *  SuperH version:  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
  *		     Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
- *		     Copyright (C) 2002 - 2007  Paul Mundt
+ *		     Copyright (C) 2002 - 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
 #include <linux/module.h>
 #include <linux/mm.h>
@@ -26,6 +30,7 @@
 #include <asm/system.h>
 #include <asm/ubc.h>
 #include <asm/fpu.h>
+#include <asm/syscalls.h>
 
 static int hlt_counter;
 int ubc_usercnt = 0;
@@ -111,15 +116,21 @@ void show_regs(struct pt_regs * regs)
 {
 	printk("\n");
 	printk("Pid : %d, Comm: %20s\n", task_pid_nr(current), current->comm);
+	printk("CPU : %d    %s  (%s %.*s)\n",
+	       smp_processor_id(), print_tainted(), init_utsname()->release,
+	       (int)strcspn(init_utsname()->version, " "),
+	       init_utsname()->version);
+
 	print_symbol("PC is at %s\n", instruction_pointer(regs));
+	print_symbol("PR is at %s\n", regs->pr);
+
 	printk("PC  : %08lx SP  : %08lx SR  : %08lx ",
 	       regs->pc, regs->regs[15], regs->sr);
 #ifdef CONFIG_MMU
-	printk("TEA : %08x    ", ctrl_inl(MMU_TEA));
+	printk("TEA : %08x\n", ctrl_inl(MMU_TEA));
 #else
-	printk("                  ");
+	printk("\n");
 #endif
-	printk("%s\n", print_tainted());
 
 	printk("R0  : %08lx R1  : %08lx R2  : %08lx R3  : %08lx\n",
 	       regs->regs[0],regs->regs[1],
@@ -162,6 +173,7 @@ __asm__(".align 5\n"
 int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 {
 	struct pt_regs regs;
+	int pid;
 
 	memset(&regs, 0, sizeof(regs));
 	regs.regs[4] = (unsigned long)arg;
@@ -171,8 +183,12 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 	regs.sr = (1 << 30);
 
 	/* Ok, create the new process.. */
-	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
-		       &regs, 0, NULL, NULL);
+	pid = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
+		      &regs, 0, NULL, NULL);
+
+	trace_mark(kernel_arch_kthread_create, "pid %d fn %p", pid, fn);
+
+	return pid;
 }
 
 /*
@@ -210,10 +226,10 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
 	struct task_struct *tsk = current;
 
 	fpvalid = !!tsk_used_math(tsk);
-	if (fpvalid) {
-		unlazy_fpu(tsk, regs);
-		memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu));
-	}
+	if (fpvalid)
+		fpvalid = !fpregs_get(tsk, NULL, 0,
+				      sizeof(struct user_fpu_struct),
+				      fpu, NULL);
 #endif
 
 	return fpvalid;
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index b9dbd2d..b7aa092 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/proc_fs.h>
 #include <linux/io.h>
+#include <asm/syscalls.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/mmu_context.h>
@@ -395,6 +396,7 @@ ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *))
 int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 {
 	struct pt_regs regs;
+	int pid;
 
 	memset(&regs, 0, sizeof(regs));
 	regs.regs[2] = (unsigned long)arg;
@@ -403,8 +405,13 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 	regs.pc = (unsigned long)kernel_thread_helper;
 	regs.sr = (1 << 30);
 
-	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
-		       &regs, 0, NULL, NULL);
+	/* Ok, create the new process.. */
+	pid = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
+		      &regs, 0, NULL, NULL);
+
+	trace_mark(kernel_arch_kthread_create, "pid %d fn %p", pid, fn);
+
+	return pid;
 }
 
 /*
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index 035cb30..29ca09d 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -1,12 +1,14 @@
 /*
- * linux/arch/sh/kernel/ptrace.c
+ * SuperH process tracing
  *
- * Original x86 implementation:
- *	By Ross Biro 1/23/92
- *	edited by Linus Torvalds
+ * Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
+ * Copyright (C) 2002 - 2008  Paul Mundt
  *
- * SuperH version:   Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
- * Audit support: Yuichi Nakamura <ynakam@hitachisoft.jp>
+ * Audit support by Yuichi Nakamura <ynakam@hitachisoft.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -22,16 +24,15 @@
 #include <linux/audit.h>
 #include <linux/seccomp.h>
 #include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/regset.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
 #include <asm/processor.h>
 #include <asm/mmu_context.h>
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
+#include <asm/syscalls.h>
+#include <asm/fpu.h>
 
 /*
  * This routine will get a word off of the process kernel stack.
@@ -61,16 +62,12 @@ static inline int put_stack_long(struct task_struct *task, int offset,
 
 void user_enable_single_step(struct task_struct *child)
 {
-	struct pt_regs *regs = task_pt_regs(child);
-	long pc;
-
-	pc = get_stack_long(child, (long)&regs->pc);
-
 	/* Next scheduling will set up UBC */
 	if (child->thread.ubc_pc == 0)
 		ubc_usercnt += 1;
 
-	child->thread.ubc_pc = pc;
+	child->thread.ubc_pc = get_stack_long(child,
+				offsetof(struct pt_regs, pc));
 
 	set_tsk_thread_flag(child, TIF_SINGLESTEP);
 }
@@ -102,9 +99,213 @@ void ptrace_disable(struct task_struct *child)
 	user_disable_single_step(child);
 }
 
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  regs->regs,
+				  0, 16 * sizeof(unsigned long));
+	if (!ret)
+		/* PC, PR, SR, GBR, MACH, MACL, TRA */
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  &regs->pc,
+					  offsetof(struct pt_regs, pc),
+					  sizeof(struct pt_regs));
+	if (!ret)
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					       sizeof(struct pt_regs), -1);
+
+	return ret;
+}
+
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 regs->regs,
+				 0, 16 * sizeof(unsigned long));
+	if (!ret && count > 0)
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &regs->pc,
+					 offsetof(struct pt_regs, pc),
+					 sizeof(struct pt_regs));
+	if (!ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						sizeof(struct pt_regs), -1);
+
+	return ret;
+}
+
+#ifdef CONFIG_SH_FPU
+int fpregs_get(struct task_struct *target,
+	       const struct user_regset *regset,
+	       unsigned int pos, unsigned int count,
+	       void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
+
+	if ((boot_cpu_data.flags & CPU_HAS_FPU))
+		return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					   &target->thread.fpu.hard, 0, -1);
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &target->thread.fpu.soft, 0, -1);
+}
+
+static int fpregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
+
+	set_stopped_child_used_math(target);
+
+	if ((boot_cpu_data.flags & CPU_HAS_FPU))
+		return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					  &target->thread.fpu.hard, 0, -1);
+
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.fpu.soft, 0, -1);
+}
+
+static int fpregs_active(struct task_struct *target,
+			 const struct user_regset *regset)
+{
+	return tsk_used_math(target) ? regset->n : 0;
+}
+#endif
+
+#ifdef CONFIG_SH_DSP
+static int dspregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct pt_dspregs *regs = task_pt_dspregs(target);
+	int ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, regs,
+				  0, sizeof(struct pt_dspregs));
+	if (!ret)
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					       sizeof(struct pt_dspregs), -1);
+
+	return ret;
+}
+
+static int dspregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct pt_dspregs *regs = task_pt_dspregs(target);
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, regs,
+				 0, sizeof(struct pt_dspregs));
+	if (!ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						sizeof(struct pt_dspregs), -1);
+
+	return ret;
+}
+
+static int dspregs_active(struct task_struct *target,
+			  const struct user_regset *regset)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+
+	return regs->sr & SR_DSP ? regset->n : 0;
+}
+#endif
+
+/*
+ * These are our native regset flavours.
+ */
+enum sh_regset {
+	REGSET_GENERAL,
+#ifdef CONFIG_SH_FPU
+	REGSET_FPU,
+#endif
+#ifdef CONFIG_SH_DSP
+	REGSET_DSP,
+#endif
+};
+
+static const struct user_regset sh_regsets[] = {
+	/*
+	 * Format is:
+	 *	R0 --> R15
+	 *	PC, PR, SR, GBR, MACH, MACL, TRA
+	 */
+	[REGSET_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= genregs_get,
+		.set		= genregs_set,
+	},
+
+#ifdef CONFIG_SH_FPU
+	[REGSET_FPU] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= sizeof(struct user_fpu_struct) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= fpregs_get,
+		.set		= fpregs_set,
+		.active		= fpregs_active,
+	},
+#endif
+
+#ifdef CONFIG_SH_DSP
+	[REGSET_DSP] = {
+		.n		= sizeof(struct pt_dspregs) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= dspregs_get,
+		.set		= dspregs_set,
+		.active		= dspregs_active,
+	},
+#endif
+};
+
+static const struct user_regset_view user_sh_native_view = {
+	.name		= "sh",
+	.e_machine	= EM_SH,
+	.regsets	= sh_regsets,
+	.n		= ARRAY_SIZE(sh_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_sh_native_view;
+}
+
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	struct user * dummy = NULL;
+	unsigned long __user *datap = (unsigned long __user *)data;
 	int ret;
 
 	switch (request) {
@@ -133,7 +334,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			tmp = !!tsk_used_math(child);
 		else
 			tmp = 0;
-		ret = put_user(tmp, (unsigned long __user *)data);
+		ret = put_user(tmp, datap);
 		break;
 	}
 
@@ -157,34 +358,39 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
+	case PTRACE_GETREGS:
+		return copy_regset_to_user(child, &user_sh_native_view,
+					   REGSET_GENERAL,
+					   0, sizeof(struct pt_regs),
+					   (void __user *)data);
+	case PTRACE_SETREGS:
+		return copy_regset_from_user(child, &user_sh_native_view,
+					     REGSET_GENERAL,
+					     0, sizeof(struct pt_regs),
+					     (const void __user *)data);
+#ifdef CONFIG_SH_FPU
+	case PTRACE_GETFPREGS:
+		return copy_regset_to_user(child, &user_sh_native_view,
+					   REGSET_FPU,
+					   0, sizeof(struct user_fpu_struct),
+					   (void __user *)data);
+	case PTRACE_SETFPREGS:
+		return copy_regset_from_user(child, &user_sh_native_view,
+					     REGSET_FPU,
+					     0, sizeof(struct user_fpu_struct),
+					     (const void __user *)data);
+#endif
 #ifdef CONFIG_SH_DSP
-	case PTRACE_GETDSPREGS: {
-		unsigned long dp;
-
-		ret = -EIO;
-		dp = ((unsigned long) child) + THREAD_SIZE -
-			 sizeof(struct pt_dspregs);
-		if (*((int *) (dp - 4)) == SR_FD) {
-			copy_to_user((void *)addr, (void *) dp,
-				sizeof(struct pt_dspregs));
-			ret = 0;
-		}
-		break;
-	}
-
-	case PTRACE_SETDSPREGS: {
-		unsigned long dp;
-
-		ret = -EIO;
-		dp = ((unsigned long) child) + THREAD_SIZE -
-			 sizeof(struct pt_dspregs);
-		if (*((int *) (dp - 4)) == SR_FD) {
-			copy_from_user((void *) dp, (void *)addr,
-				sizeof(struct pt_dspregs));
-			ret = 0;
-		}
-		break;
-	}
+	case PTRACE_GETDSPREGS:
+		return copy_regset_to_user(child, &user_sh_native_view,
+					   REGSET_DSP,
+					   0, sizeof(struct pt_dspregs),
+					   (void __user *)data);
+	case PTRACE_SETDSPREGS:
+		return copy_regset_from_user(child, &user_sh_native_view,
+					     REGSET_DSP,
+					     0, sizeof(struct pt_dspregs),
+					     (const void __user *)data);
 #endif
 #ifdef CONFIG_BINFMT_ELF_FDPIC
 	case PTRACE_GETFDPIC: {
@@ -202,7 +408,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 
 		ret = 0;
-		if (put_user(tmp, (unsigned long *) data)) {
+		if (put_user(tmp, datap)) {
 			ret = -EFAULT;
 			break;
 		}
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index 9c64248..e15b099 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -35,6 +35,7 @@
 #include <asm/system.h>
 #include <asm/processor.h>
 #include <asm/mmu_context.h>
+#include <asm/syscalls.h>
 #include <asm/fpu.h>
 
 /* This mask defines the bits of the SR which the user is not allowed to
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index de83205..e7152cc 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -26,6 +26,9 @@
 #include <linux/err.h>
 #include <linux/debugfs.h>
 #include <linux/crash_dump.h>
+#include <linux/mmzone.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -144,6 +147,7 @@ static void __init reserve_crashkernel(void)
 {
 	unsigned long long free_mem;
 	unsigned long long crash_size, crash_base;
+	void *vp;
 	int ret;
 
 	free_mem = ((unsigned long long)max_low_pfn - min_low_pfn) << PAGE_SHIFT;
@@ -152,12 +156,14 @@ static void __init reserve_crashkernel(void)
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size) {
 		if (crash_base <= 0) {
-			printk(KERN_INFO "crashkernel reservation failed - "
-					"you have to specify a base address\n");
-			return;
-		}
-
-		if (reserve_bootmem(crash_base, crash_size,
+			vp = alloc_bootmem_nopanic(crash_size); 
+			if (!vp) {
+				printk(KERN_INFO "crashkernel allocation "
+				       "failed\n");
+				return;
+			}
+			crash_base = __pa(vp);
+		} else if (reserve_bootmem(crash_base, crash_size,
 					BOOTMEM_EXCLUSIVE) < 0) {
 			printk(KERN_INFO "crashkernel reservation failed - "
 					"memory is in use\n");
@@ -179,6 +185,24 @@ static inline void __init reserve_crashkernel(void)
 {}
 #endif
 
+#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
+void __cpuinit calibrate_delay(void)
+{
+	struct clk *clk = clk_get(NULL, "cpu_clk");
+
+	if (IS_ERR(clk))
+		panic("Need a sane CPU clock definition!");
+
+	loops_per_jiffy = (clk_get_rate(clk) >> 1) / HZ;
+
+	printk(KERN_INFO "Calibrating delay loop (skipped)... "
+			 "%lu.%02lu BogoMIPS PRESET (lpj=%lu)\n",
+			 loops_per_jiffy/(500000/HZ),
+			 (loops_per_jiffy/(5000/HZ)) % 100,
+			 loops_per_jiffy);
+}
+#endif
+
 void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 						unsigned long end_pfn)
 {
@@ -232,15 +256,17 @@ void __init setup_bootmem_allocator(unsigned long free_pfn)
 	 * case of us accidentally initializing the bootmem allocator with
 	 * an invalid RAM area.
 	 */
-	reserve_bootmem(__MEMORY_START+PAGE_SIZE,
-		(PFN_PHYS(free_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START,
-		BOOTMEM_DEFAULT);
+	reserve_bootmem(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
+			(PFN_PHYS(free_pfn) + bootmap_size + PAGE_SIZE - 1) -
+			(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET),
+			BOOTMEM_DEFAULT);
 
 	/*
 	 * reserve physical page 0 - it's a special BIOS page on many boxes,
 	 * enabling clean reboots, SMP operation, laptop functions.
 	 */
-	reserve_bootmem(__MEMORY_START, PAGE_SIZE, BOOTMEM_DEFAULT);
+	reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
+			BOOTMEM_DEFAULT);
 
 	sparse_memory_present_with_active_regions(0);
 
@@ -248,17 +274,18 @@ void __init setup_bootmem_allocator(unsigned long free_pfn)
 	ROOT_DEV = Root_RAM0;
 
 	if (LOADER_TYPE && INITRD_START) {
-		if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
-			reserve_bootmem(INITRD_START + __MEMORY_START,
-					INITRD_SIZE, BOOTMEM_DEFAULT);
-			initrd_start = INITRD_START + PAGE_OFFSET +
-					__MEMORY_START;
+		unsigned long initrd_start_phys = INITRD_START + __MEMORY_START;
+
+		if (initrd_start_phys + INITRD_SIZE <= PFN_PHYS(max_low_pfn)) {
+			reserve_bootmem(initrd_start_phys, INITRD_SIZE,
+					BOOTMEM_DEFAULT);
+			initrd_start = (unsigned long)__va(initrd_start_phys);
 			initrd_end = initrd_start + INITRD_SIZE;
 		} else {
 			printk("initrd extends beyond end of memory "
-			    "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-				    INITRD_START + INITRD_SIZE,
-				    max_low_pfn << PAGE_SHIFT);
+			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+			       initrd_start_phys + INITRD_SIZE,
+			       (unsigned long)PFN_PHYS(max_low_pfn));
 			initrd_start = 0;
 		}
 	}
@@ -530,6 +557,8 @@ struct dentry *sh_debugfs_root;
 static int __init sh_debugfs_init(void)
 {
 	sh_debugfs_root = debugfs_create_dir("sh", NULL);
+	if (!sh_debugfs_root)
+		return -ENOMEM;
 	if (IS_ERR(sh_debugfs_root))
 		return PTR_ERR(sh_debugfs_root);
 
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 6e1b1c2..d366a74 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -16,6 +16,7 @@
 #include <asm/delay.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
+#include <asm/ftrace.h>
 
 extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
 extern struct hw_interrupt_type no_irq_type;
@@ -125,7 +126,6 @@ DECLARE_EXPORT(__movstrSI12_i4);
 EXPORT_SYMBOL(flush_cache_all);
 EXPORT_SYMBOL(flush_cache_range);
 EXPORT_SYMBOL(flush_dcache_page);
-EXPORT_SYMBOL(__flush_purge_region);
 #endif
 
 #if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
@@ -133,6 +133,9 @@ EXPORT_SYMBOL(__flush_purge_region);
 EXPORT_SYMBOL(clear_user_page);
 #endif
 
+#ifdef CONFIG_FTRACE
+EXPORT_SYMBOL(mcount);
+#endif
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
 #ifdef CONFIG_IPV6
@@ -143,3 +146,9 @@ EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(_ebss);
 EXPORT_SYMBOL(empty_zero_page);
+
+#ifndef CONFIG_CACHE_OFF
+EXPORT_SYMBOL(__flush_purge_region);
+EXPORT_SYMBOL(__flush_wback_region);
+EXPORT_SYMBOL(__flush_invalidate_region);
+#endif
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 51689d2..69d09c0 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -30,6 +30,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
+#include <asm/syscalls.h>
 #include <asm/fpu.h>
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
@@ -215,6 +216,9 @@ asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5,
 	sigset_t set;
 	int r0;
 
+        /* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 
@@ -247,9 +251,11 @@ asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
 	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->regs[15];
 	sigset_t set;
-	stack_t st;
 	int r0;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 
@@ -265,11 +271,9 @@ asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
 		goto badframe;
 
-	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL,
+			   regs->regs[15]) == -EFAULT)
 		goto badframe;
-	/* It is more difficult to avoid calling this function than to
-	   call it and ignore errors.  */
-	do_sigaltstack((const stack_t __user *)&st, NULL, (unsigned long)frame);
 
 	return r0;
 
@@ -429,7 +433,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 	/* Create the ucontext.  */
 	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
+	err |= __put_user(NULL, &frame->uc.uc_link);
 	err |= __put_user((void *)current->sas_ss_sp,
 			  &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->regs[15]),
@@ -492,37 +496,43 @@ give_sigsegv:
 	return -EFAULT;
 }
 
+static inline void
+handle_syscall_restart(unsigned long save_r0, struct pt_regs *regs,
+		       struct sigaction *sa)
+{
+	/* If we're not from a syscall, bail out */
+	if (regs->tra < 0)
+		return;
+
+	/* check for system call restart.. */
+	switch (regs->regs[0]) {
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+		no_system_call_restart:
+			regs->regs[0] = -EINTR;
+			regs->sr |= 1;
+			break;
+
+		case -ERESTARTSYS:
+			if (!(sa->sa_flags & SA_RESTART))
+				goto no_system_call_restart;
+		/* fallthrough */
+		case -ERESTARTNOINTR:
+			regs->regs[0] = save_r0;
+			regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+			break;
+	}
+}
+
 /*
  * OK, we're invoking a handler
  */
-
 static int
 handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	      sigset_t *oldset, struct pt_regs *regs, unsigned int save_r0)
 {
 	int ret;
 
-	/* Are we from a system call? */
-	if (regs->tra >= 0) {
-		/* If so, check system call restarting.. */
-		switch (regs->regs[0]) {
-			case -ERESTART_RESTARTBLOCK:
-			case -ERESTARTNOHAND:
-			no_system_call_restart:
-				regs->regs[0] = -EINTR;
-				break;
-
-			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART))
-					goto no_system_call_restart;
-			/* fallthrough */
-			case -ERESTARTNOINTR:
-				regs->regs[0] = save_r0;
-				regs->pc -= instruction_size(
-						ctrl_inw(regs->pc - 4));
-				break;
-		}
-	}
 
 	/* Set up the stack frame */
 	if (ka->sa.sa_flags & SA_SIGINFO)
@@ -580,6 +590,9 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
+		if (regs->sr & 1)
+			handle_syscall_restart(save_r0, regs, &ka.sa);
+
 		/* Whee!  Actually deliver the signal.  */
 		if (handle_signal(signr, &ka, &info, oldset,
 				  regs, save_r0) == 0) {
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 1d62dfe..ce3e851 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -43,6 +43,10 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+static void
+handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
+		sigset_t *oldset, struct pt_regs * regs);
+
 /*
  * Note that 'init' is a special process: it doesn't get signals it doesn't
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
@@ -371,6 +375,9 @@ asmlinkage int sys_sigreturn(unsigned long r2, unsigned long r3,
 	sigset_t set;
 	long long ret;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 
@@ -408,6 +415,9 @@ asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3,
 	stack_t __user st;
 	long long ret;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 
@@ -535,7 +545,7 @@ static void setup_frame(int sig, struct k_sigaction *ka,
 		 * On SH5 all edited pointers are subject to NEFF
 		 */
 		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-        		 	(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
 	} else {
 		/*
 		 * Different approach on SH5.
@@ -550,10 +560,10 @@ static void setup_frame(int sig, struct k_sigaction *ka,
 		 */
 		DEREF_REG_PR = (unsigned long) frame->retcode | 0x01;
 		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-        		 	(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
 
 		if (__copy_to_user(frame->retcode,
-			(unsigned long long)sa_default_restorer & (~1), 16) != 0)
+			(void *)((unsigned long)sa_default_restorer & (~1)), 16) != 0)
 			goto give_sigsegv;
 
 		/* Cohere the trampoline with the I-cache. */
@@ -566,7 +576,7 @@ static void setup_frame(int sig, struct k_sigaction *ka,
 	 */
 	regs->regs[REG_SP] = (unsigned long) frame;
 	regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ?
-        		 (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP];
+		 (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP];
 	regs->regs[REG_ARG1] = signal; /* Arg for signal handler */
 
         /* FIXME:
@@ -652,7 +662,7 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		 * On SH5 all edited pointers are subject to NEFF
 		 */
 		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-        		 	(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
 	} else {
 		/*
 		 * Different approach on SH5.
@@ -668,10 +678,10 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 		DEREF_REG_PR = (unsigned long) frame->retcode | 0x01;
 		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-        		 	(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
 
 		if (__copy_to_user(frame->retcode,
-			(unsigned long long)sa_default_rt_restorer & (~1), 16) != 0)
+			(void *)((unsigned long)sa_default_rt_restorer & (~1)), 16) != 0)
 			goto give_sigsegv;
 
 		flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15);
@@ -683,7 +693,7 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	 */
 	regs->regs[REG_SP] = (unsigned long) frame;
 	regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ?
-        		 (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP];
+		 (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP];
 	regs->regs[REG_ARG1] = signal; /* Arg for signal handler */
 	regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info;
 	regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext;
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 60c5084..3c5ad16 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -3,7 +3,7 @@
  *
  * SMP support for the SuperH processors.
  *
- * Copyright (C) 2002 - 2007 Paul Mundt
+ * Copyright (C) 2002 - 2008 Paul Mundt
  * Copyright (C) 2006 - 2007 Akio Idehara
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -18,6 +18,7 @@
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/cpu.h>
 #include <linux/interrupt.h>
 #include <asm/atomic.h>
 #include <asm/processor.h>
@@ -82,11 +83,16 @@ asmlinkage void __cpuinit start_secondary(void)
 
 	preempt_disable();
 
+	notify_cpu_starting(smp_processor_id());
+
 	local_irq_enable();
 
+	cpu = smp_processor_id();
+
+	/* Enable local timers */
+	local_timer_setup(cpu);
 	calibrate_delay();
 
-	cpu = smp_processor_id();
 	smp_store_cpu_info(cpu);
 
 	cpu_set(cpu, cpu_online_map);
@@ -184,6 +190,42 @@ void arch_send_call_function_single_ipi(int cpu)
 	plat_send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE);
 }
 
+void smp_timer_broadcast(cpumask_t mask)
+{
+	int cpu;
+
+	for_each_cpu_mask(cpu, mask)
+		plat_send_ipi(cpu, SMP_MSG_TIMER);
+}
+
+static void ipi_timer(void)
+{
+	irq_enter();
+	local_timer_interrupt();
+	irq_exit();
+}
+
+void smp_message_recv(unsigned int msg)
+{
+	switch (msg) {
+	case SMP_MSG_FUNCTION:
+		generic_smp_call_function_interrupt();
+		break;
+	case SMP_MSG_RESCHEDULE:
+		break;
+	case SMP_MSG_FUNCTION_SINGLE:
+		generic_smp_call_function_single_interrupt();
+		break;
+	case SMP_MSG_TIMER:
+		ipi_timer();
+		break;
+	default:
+		printk(KERN_WARNING "SMP %d: %s(): unknown IPI %d\n",
+		       smp_processor_id(), __func__, msg);
+		break;
+	}
+}
+
 /* Not really SMP stuff ... */
 int setup_profiling_timer(unsigned int multiplier)
 {
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 54d1f61..1a2a5eb 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -3,7 +3,7 @@
  *
  * Stack trace management functions
  *
- *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -36,3 +36,24 @@ void save_stack_trace(struct stack_trace *trace)
 	}
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	unsigned long *sp = (unsigned long *)tsk->thread.sp;
+
+	while (!kstack_end(sp)) {
+		unsigned long addr = *sp++;
+
+		if (__kernel_text_address(addr)) {
+			if (in_sched_functions(addr))
+				break;
+			if (trace->skip > 0)
+				trace->skip--;
+			else
+				trace->entries[trace->nr_entries++] = addr;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 9061b86..38f098c 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -23,6 +23,7 @@
 #include <linux/fs.h>
 #include <linux/ipc.h>
 #include <asm/cacheflush.h>
+#include <asm/syscalls.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
 
@@ -170,6 +171,8 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 	version = call >> 16; /* hack for backward compatibility */
 	call &= 0xffff;
 
+	trace_mark(kernel_arch_ipc_call, "call %u first %d", call, first);
+
 	if (call <= SEMTIMEDOP)
 		switch (call) {
 		case SEMOP:
@@ -186,7 +189,7 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 			union semun fourth;
 			if (!ptr)
 				return -EINVAL;
-			if (get_user(fourth.__pad, (void * __user *) ptr))
+			if (get_user(fourth.__pad, (void __user * __user *) ptr))
 				return -EFAULT;
 			return sys_semctl (first, second, third, fourth);
 			}
@@ -261,13 +264,13 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 	return -EINVAL;
 }
 
-asmlinkage int sys_uname(struct old_utsname * name)
+asmlinkage int sys_uname(struct old_utsname __user *name)
 {
 	int err;
 	if (!name)
 		return -EFAULT;
 	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
+	err = copy_to_user(name, utsname(), sizeof(*name));
 	up_read(&uts_sem);
 	return err?-EFAULT:0;
 }
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
index f0aa5c3..dbba1e1 100644
--- a/arch/sh/kernel/sys_sh32.c
+++ b/arch/sh/kernel/sys_sh32.c
@@ -16,6 +16,7 @@
 #include <asm/cacheflush.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
+#include <asm/syscalls.h>
 
 /*
  * sys_pipe() is the normal C calling standard for creating
@@ -37,13 +38,13 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
 	return error;
 }
 
-asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char * buf,
+asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
 			     size_t count, long dummy, loff_t pos)
 {
 	return sys_pread64(fd, buf, count, pos);
 }
 
-asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char * buf,
+asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
 			      size_t count, long dummy, loff_t pos)
 {
 	return sys_pwrite64(fd, buf, count, pos);
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 0758b5e..23ca711 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -1,9 +1,9 @@
 /*
- *  arch/sh/kernel/time.c
+ *  arch/sh/kernel/time_32.c
  *
  *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
  *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
- *  Copyright (C) 2002 - 2007  Paul Mundt
+ *  Copyright (C) 2002 - 2008  Paul Mundt
  *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
  *
  *  Some code taken from i386 version.
@@ -16,6 +16,8 @@
 #include <linux/timex.h>
 #include <linux/sched.h>
 #include <linux/clockchips.h>
+#include <linux/mc146818rtc.h>	/* for rtc_lock */
+#include <linux/smp.h>
 #include <asm/clock.h>
 #include <asm/rtc.h>
 #include <asm/timer.h>
@@ -253,6 +255,10 @@ void __init time_init(void)
 	set_normalized_timespec(&wall_to_monotonic,
 				-xtime.tv_sec, -xtime.tv_nsec);
 
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+	local_timer_setup(smp_processor_id());
+#endif
+
 	/*
 	 * Find the timer to use as the system timer, it will be
 	 * initialized for us.
@@ -260,6 +266,7 @@ void __init time_init(void)
 	sys_timer = get_sys_timer();
 	printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
 
+
 	if (sys_timer->ops->read)
 		clocksource_sh.read = sys_timer->ops->read;
 
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
index 791edab..bbb2af1 100644
--- a/arch/sh/kernel/time_64.c
+++ b/arch/sh/kernel/time_64.c
@@ -39,6 +39,7 @@
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/delay.h>
+#include <asm/clock.h>
 
 #define TMU_TOCR_INIT	0x00
 #define TMU0_TCR_INIT	0x0020
@@ -51,14 +52,6 @@
 #define RTC_RCR1_CIE	0x10	/* Carry Interrupt Enable */
 #define RTC_RCR1	(rtc_base + 0x38)
 
-/* Clock, Power and Reset Controller */
-#define	CPRC_BLOCK_OFF	0x01010000
-#define CPRC_BASE	PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF
-
-#define FRQCR		(cprc_base+0x0)
-#define WTCSR		(cprc_base+0x0018)
-#define STBCR		(cprc_base+0x0030)
-
 /* Time Management Unit */
 #define	TMU_BLOCK_OFF	0x01020000
 #define TMU_BASE	PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
@@ -293,103 +286,17 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-
-static __init unsigned int get_cpu_hz(void)
-{
-	unsigned int count;
-	unsigned long __dummy;
-	unsigned long ctc_val_init, ctc_val;
-
-	/*
-	** Regardless the toolchain, force the compiler to use the
-	** arbitrary register r3 as a clock tick counter.
-	** NOTE: r3 must be in accordance with sh64_rtc_interrupt()
-	*/
-	register unsigned long long  __rtc_irq_flag __asm__ ("r3");
-
-	local_irq_enable();
-	do {} while (ctrl_inb(rtc_base) != 0);
-	ctrl_outb(RTC_RCR1_CIE, RTC_RCR1); /* Enable carry interrupt */
-
-	/*
-	 * r3 is arbitrary. CDC does not support "=z".
-	 */
-	ctc_val_init = 0xffffffff;
-	ctc_val = ctc_val_init;
-
-	asm volatile("gettr	tr0, %1\n\t"
-		     "putcon	%0, " __CTC "\n\t"
-		     "and	%2, r63, %2\n\t"
-		     "pta	$+4, tr0\n\t"
-		     "beq/l	%2, r63, tr0\n\t"
-		     "ptabs	%1, tr0\n\t"
-		     "getcon	" __CTC ", %0\n\t"
-		: "=r"(ctc_val), "=r" (__dummy), "=r" (__rtc_irq_flag)
-		: "0" (0));
-	local_irq_disable();
-	/*
-	 * SH-3:
-	 * CPU clock = 4 stages * loop
-	 * tst    rm,rm      if id ex
-	 * bt/s   1b            if id ex
-	 * add    #1,rd            if id ex
-         *                            (if) pipe line stole
-	 * tst    rm,rm                  if id ex
-         * ....
-	 *
-	 *
-	 * SH-4:
-	 * CPU clock = 6 stages * loop
-	 * I don't know why.
-         * ....
-	 *
-	 * SH-5:
-	 * Use CTC register to count.  This approach returns the right value
-	 * even if the I-cache is disabled (e.g. whilst debugging.)
-	 *
-	 */
-
-	count = ctc_val_init - ctc_val; /* CTC counts down */
-
-	/*
-	 * This really is count by the number of clock cycles
-         * by the ratio between a complete R64CNT
-         * wrap-around (128) and CUI interrupt being raised (64).
-	 */
-	return count*2;
-}
-
-static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-
-	ctrl_outb(0, RTC_RCR1);	/* Disable Carry Interrupts */
-	regs->regs[3] = 1;	/* Using r3 */
-
-	return IRQ_HANDLED;
-}
-
 static struct irqaction irq0  = {
 	.handler = timer_interrupt,
 	.flags = IRQF_DISABLED,
 	.mask = CPU_MASK_NONE,
 	.name = "timer",
 };
-static struct irqaction irq1  = {
-	.handler = sh64_rtc_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "rtc",
-};
 
 void __init time_init(void)
 {
-	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
 	unsigned long interval;
-	unsigned long frqcr, ifc, pfc;
-	static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
-#define bfc_table ifc_table	/* Same */
-#define pfc_table ifc_table	/* Same */
+	struct clk *clk;
 
 	tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
 	if (!tmu_base) {
@@ -401,50 +308,19 @@ void __init time_init(void)
 		panic("Unable to remap RTC\n");
 	}
 
-	cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
-	if (!cprc_base) {
-		panic("Unable to remap CPRC\n");
-	}
+	clk = clk_get(NULL, "cpu_clk");
+	scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) /
+			(unsigned long long)(clk_get_rate(clk) / HZ));
 
 	rtc_sh_get_time(&xtime);
 
 	setup_irq(TIMER_IRQ, &irq0);
-	setup_irq(RTC_IRQ, &irq1);
-
-	/* Check how fast it is.. */
-	cpu_clock = get_cpu_hz();
-
-	/* Note careful order of operations to maintain reasonable precision and avoid overflow. */
-	scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(cpu_clock / HZ));
-
-	free_irq(RTC_IRQ, NULL);
-
-	printk("CPU clock: %d.%02dMHz\n",
-	       (cpu_clock / 1000000), (cpu_clock % 1000000)/10000);
-	{
-		unsigned short bfc;
-		frqcr = ctrl_inl(FRQCR);
-		ifc  = ifc_table[(frqcr>> 6) & 0x0007];
-		bfc  = bfc_table[(frqcr>> 3) & 0x0007];
-		pfc  = pfc_table[(frqcr>> 12) & 0x0007];
-		master_clock = cpu_clock * ifc;
-		bus_clock = master_clock/bfc;
-	}
 
-	printk("Bus clock: %d.%02dMHz\n",
-	       (bus_clock/1000000), (bus_clock % 1000000)/10000);
-	module_clock = master_clock/pfc;
-	printk("Module clock: %d.%02dMHz\n",
-	       (module_clock/1000000), (module_clock % 1000000)/10000);
-	interval = (module_clock/(HZ*4));
+	clk = clk_get(NULL, "module_clk");
+	interval = (clk_get_rate(clk)/(HZ*4));
 
 	printk("Interval = %ld\n", interval);
 
-	current_cpu_data.cpu_clock    = cpu_clock;
-	current_cpu_data.master_clock = master_clock;
-	current_cpu_data.bus_clock    = bus_clock;
-	current_cpu_data.module_clock = module_clock;
-
 	/* Start TMU0 */
 	ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
 	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
@@ -454,36 +330,6 @@ void __init time_init(void)
 	ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
 }
 
-void enter_deep_standby(void)
-{
-	/* Disable watchdog timer */
-	ctrl_outl(0xa5000000, WTCSR);
-	/* Configure deep standby on sleep */
-	ctrl_outl(0x03, STBCR);
-
-#ifdef CONFIG_SH_ALPHANUMERIC
-	{
-		extern void mach_alphanum(int position, unsigned char value);
-		extern void mach_alphanum_brightness(int setting);
-		char halted[] = "Halted. ";
-		int i;
-		mach_alphanum_brightness(6); /* dimmest setting above off */
-		for (i=0; i<8; i++) {
-			mach_alphanum(i, halted[i]);
-		}
-		asm __volatile__ ("synco");
-	}
-#endif
-
-	asm __volatile__ ("sleep");
-	asm __volatile__ ("synci");
-	asm __volatile__ ("nop");
-	asm __volatile__ ("nop");
-	asm __volatile__ ("nop");
-	asm __volatile__ ("nop");
-	panic("Unexpected wakeup!\n");
-}
-
 static struct resource rtc_resources[] = {
 	[0] = {
 		/* RTC base, filled in by rtc_init */
diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile
index bcf244f..0b7f857 100644
--- a/arch/sh/kernel/timers/Makefile
+++ b/arch/sh/kernel/timers/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_SH_TMU)		+= timer-tmu.o
 obj-$(CONFIG_SH_MTU2)		+= timer-mtu2.o
 obj-$(CONFIG_SH_CMT)		+= timer-cmt.o
 
+obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= timer-broadcast.o
diff --git a/arch/sh/kernel/timers/timer-broadcast.c b/arch/sh/kernel/timers/timer-broadcast.c
new file mode 100644
index 0000000..c231763
--- /dev/null
+++ b/arch/sh/kernel/timers/timer-broadcast.c
@@ -0,0 +1,57 @@
+/*
+ * Dummy local timer
+ *
+ * Copyright (C) 2008  Paul Mundt
+ *
+ * cloned from:
+ *
+ *  linux/arch/arm/mach-realview/localtimer.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/jiffies.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+
+static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
+
+/*
+ * Used on SMP for either the local timer or SMP_MSG_TIMER
+ */
+void local_timer_interrupt(void)
+{
+	struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
+
+	clk->event_handler(clk);
+}
+
+static void dummy_timer_set_mode(enum clock_event_mode mode,
+				 struct clock_event_device *clk)
+{
+}
+
+void __cpuinit local_timer_setup(unsigned int cpu)
+{
+	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
+
+	clk->name		= "dummy_timer";
+	clk->features		= CLOCK_EVT_FEAT_DUMMY;
+	clk->rating		= 200;
+	clk->mult		= 1;
+	clk->set_mode		= dummy_timer_set_mode;
+	clk->broadcast		= smp_timer_broadcast;
+	clk->cpumask		= cpumask_of_cpu(cpu);
+
+	clockevents_register_device(clk);
+}
diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c
index d20c8c3..c127293 100644
--- a/arch/sh/kernel/timers/timer-cmt.c
+++ b/arch/sh/kernel/timers/timer-cmt.c
@@ -174,7 +174,7 @@ static int cmt_timer_init(void)
 	return 0;
 }
 
-struct sys_timer_ops cmt_timer_ops = {
+static struct sys_timer_ops cmt_timer_ops = {
 	.init		= cmt_timer_init,
 	.start		= cmt_timer_start,
 	.stop		= cmt_timer_stop,
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 1ca9ad4..aaaf90d 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -28,43 +28,90 @@
 #define TMU_TOCR_INIT	0x00
 #define TMU_TCR_INIT	0x0020
 
-static int tmu_timer_start(void)
+#define TMU0		(0)
+#define TMU1		(1)
+
+static inline void _tmu_start(int tmu_num)
 {
-	ctrl_outb(ctrl_inb(TMU_012_TSTR) | 0x3, TMU_012_TSTR);
-	return 0;
+	ctrl_outb(ctrl_inb(TMU_012_TSTR) | (0x1<<tmu_num), TMU_012_TSTR);
 }
 
-static void tmu0_timer_set_interval(unsigned long interval, unsigned int reload)
+static inline void _tmu_set_irq(int tmu_num, int enabled)
 {
-	ctrl_outl(interval, TMU0_TCNT);
+	register unsigned long tmu_tcr = TMU0_TCR + (0xc*tmu_num);
+	ctrl_outw( (enabled ? ctrl_inw(tmu_tcr) | (1<<5) : ctrl_inw(tmu_tcr) & ~(1<<5)), tmu_tcr);
+}
 
-	/*
-	 * TCNT reloads from TCOR on underflow, clear it if we don't
-	 * intend to auto-reload
-	 */
-	if (reload)
-		ctrl_outl(interval, TMU0_TCOR);
-	else
-		ctrl_outl(0, TMU0_TCOR);
+static inline void _tmu_stop(int tmu_num)
+{
+	ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~(0x1<<tmu_num), TMU_012_TSTR);
+}
+
+static inline void _tmu_clear_status(int tmu_num)
+{
+	register unsigned long tmu_tcr = TMU0_TCR + (0xc*tmu_num);
+	/* Clear UNF bit */
+	ctrl_outw(ctrl_inw(tmu_tcr) & ~0x100, tmu_tcr);
+}
 
-	tmu_timer_start();
+static inline unsigned long _tmu_read(int tmu_num)
+{
+        return ctrl_inl(TMU0_TCNT+0xC*tmu_num);
+}
+
+static int tmu_timer_start(void)
+{
+	_tmu_start(TMU0);
+	_tmu_start(TMU1);
+	_tmu_set_irq(TMU0,1);
+	return 0;
 }
 
 static int tmu_timer_stop(void)
 {
-	ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~0x3, TMU_012_TSTR);
+	_tmu_stop(TMU0);
+	_tmu_stop(TMU1);
+	_tmu_clear_status(TMU0);
 	return 0;
 }
 
+/*
+ * also when the module_clk is scaled the TMU1
+ * will show the same frequency
+ */
+static int tmus_are_scaled;
+
 static cycle_t tmu_timer_read(void)
 {
-	return ~ctrl_inl(TMU1_TCNT);
+	return ((cycle_t)(~_tmu_read(TMU1)))<<tmus_are_scaled;
+}
+
+
+static unsigned long tmu_latest_interval[3];
+static void tmu_timer_set_interval(int tmu_num, unsigned long interval, unsigned int reload)
+{
+	unsigned long tmu_tcnt = TMU0_TCNT + tmu_num*0xC;
+	unsigned long tmu_tcor = TMU0_TCOR + tmu_num*0xC;
+
+	_tmu_stop(tmu_num);
+
+	ctrl_outl(interval, tmu_tcnt);
+	tmu_latest_interval[tmu_num] = interval;
+
+	/*
+	 * TCNT reloads from TCOR on underflow, clear it if we don't
+	 * intend to auto-reload
+	 */
+	ctrl_outl( reload ? interval : 0 , tmu_tcor);
+
+	_tmu_start(tmu_num);
 }
 
 static int tmu_set_next_event(unsigned long cycles,
 			      struct clock_event_device *evt)
 {
-	tmu0_timer_set_interval(cycles, 1);
+	tmu_timer_set_interval(TMU0,cycles, evt->mode == CLOCK_EVT_MODE_PERIODIC);
+	_tmu_set_irq(TMU0,1);
 	return 0;
 }
 
@@ -96,12 +143,8 @@ static struct clock_event_device tmu0_clockevent = {
 static irqreturn_t tmu_timer_interrupt(int irq, void *dummy)
 {
 	struct clock_event_device *evt = &tmu0_clockevent;
-	unsigned long timer_status;
-
-	/* Clear UNF bit */
-	timer_status = ctrl_inw(TMU0_TCR);
-	timer_status &= ~0x100;
-	ctrl_outw(timer_status, TMU0_TCR);
+	_tmu_clear_status(TMU0);
+	_tmu_set_irq(TMU0,tmu0_clockevent.mode != CLOCK_EVT_MODE_ONESHOT);
 
 	evt->event_handler(evt);
 
@@ -109,56 +152,73 @@ static irqreturn_t tmu_timer_interrupt(int irq, void *dummy)
 }
 
 static struct irqaction tmu0_irq = {
-	.name		= "periodic timer",
+	.name		= "periodic/oneshot timer",
 	.handler	= tmu_timer_interrupt,
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 	.mask		= CPU_MASK_NONE,
 };
 
-static void tmu0_clk_init(struct clk *clk)
+static void __init tmu_clk_init(struct clk *clk)
 {
-	u8 divisor = TMU_TCR_INIT & 0x7;
-	ctrl_outw(TMU_TCR_INIT, TMU0_TCR);
-	clk->rate = clk->parent->rate / (4 << (divisor << 1));
+	u8 divisor  = TMU_TCR_INIT & 0x7;
+	int tmu_num = clk->name[3]-'0';
+	ctrl_outw(TMU_TCR_INIT, TMU0_TCR+(tmu_num*0xC));
+	clk->rate = clk_get_rate(clk->parent) / (4 << (divisor << 1));
 }
 
-static void tmu0_clk_recalc(struct clk *clk)
+static void tmu_clk_recalc(struct clk *clk)
 {
-	u8 divisor = ctrl_inw(TMU0_TCR) & 0x7;
-	clk->rate = clk->parent->rate / (4 << (divisor << 1));
-}
+	int tmu_num = clk->name[3]-'0';
+	unsigned long prev_rate = clk_get_rate(clk);
+	unsigned long flags;
+	u8 divisor = ctrl_inw(TMU0_TCR+tmu_num*0xC) & 0x7;
+	clk->rate  = clk_get_rate(clk->parent) / (4 << (divisor << 1));
 
-static struct clk_ops tmu0_clk_ops = {
-	.init		= tmu0_clk_init,
-	.recalc		= tmu0_clk_recalc,
-};
+	if(prev_rate==clk_get_rate(clk))
+		return;
 
-static struct clk tmu0_clk = {
-	.name		= "tmu0_clk",
-	.ops		= &tmu0_clk_ops,
-};
+	if(tmu_num)
+		return; /* No more work on TMU1 */
 
-static void tmu1_clk_init(struct clk *clk)
-{
-	u8 divisor = TMU_TCR_INIT & 0x7;
-	ctrl_outw(divisor, TMU1_TCR);
-	clk->rate = clk->parent->rate / (4 << (divisor << 1));
-}
+	local_irq_save(flags);
+	tmus_are_scaled = (prev_rate > clk->rate);
 
-static void tmu1_clk_recalc(struct clk *clk)
-{
-	u8 divisor = ctrl_inw(TMU1_TCR) & 0x7;
-	clk->rate = clk->parent->rate / (4 << (divisor << 1));
+	_tmu_stop(TMU0);
+
+	tmu0_clockevent.mult = div_sc(clk->rate, NSEC_PER_SEC,
+				tmu0_clockevent.shift);
+	tmu0_clockevent.max_delta_ns =
+			clockevent_delta2ns(-1, &tmu0_clockevent);
+	tmu0_clockevent.min_delta_ns =
+			clockevent_delta2ns(1, &tmu0_clockevent);
+
+	if (tmus_are_scaled)
+		tmu_latest_interval[TMU0] >>= 1;
+	else
+		tmu_latest_interval[TMU0] <<= 1;
+
+	tmu_timer_set_interval(TMU0,
+		tmu_latest_interval[TMU0],
+		tmu0_clockevent.mode == CLOCK_EVT_MODE_PERIODIC);
+
+	_tmu_start(TMU0);
+
+	local_irq_restore(flags);
 }
 
-static struct clk_ops tmu1_clk_ops = {
-	.init		= tmu1_clk_init,
-	.recalc		= tmu1_clk_recalc,
+static struct clk_ops tmu_clk_ops = {
+	.init		= tmu_clk_init,
+	.recalc		= tmu_clk_recalc,
+};
+
+static struct clk tmu0_clk = {
+	.name		= "tmu0_clk",
+	.ops		= &tmu_clk_ops,
 };
 
 static struct clk tmu1_clk = {
 	.name		= "tmu1_clk",
-	.ops		= &tmu1_clk_ops,
+	.ops		= &tmu_clk_ops,
 };
 
 static int tmu_timer_init(void)
@@ -189,11 +249,12 @@ static int tmu_timer_init(void)
 	frequency = clk_get_rate(&tmu0_clk);
 	interval = (frequency + HZ / 2) / HZ;
 
-	sh_hpt_frequency = clk_get_rate(&tmu1_clk);
-	ctrl_outl(~0, TMU1_TCNT);
-	ctrl_outl(~0, TMU1_TCOR);
+	tmu_timer_set_interval(TMU0,interval, 1);
+	tmu_timer_set_interval(TMU1,~0,1);
 
-	tmu0_timer_set_interval(interval, 1);
+	_tmu_start(TMU1);
+
+	sh_hpt_frequency = clk_get_rate(&tmu1_clk);
 
 	tmu0_clockevent.mult = div_sc(frequency, NSEC_PER_SEC,
 				      tmu0_clockevent.shift);
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 511a942..1e5c74e 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -26,6 +26,7 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/fpu.h>
+#include <asm/kprobes.h>
 
 #ifdef CONFIG_SH_KGDB
 #include <asm/kgdb.h>
@@ -104,6 +105,8 @@ void die(const char * str, struct pt_regs * regs, long err)
 		dump_mem("Stack: ", regs->regs[15], THREAD_SIZE +
 			 (unsigned long)task_stack_page(current));
 
+	notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV);
+
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
@@ -192,6 +195,7 @@ static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
 	int ret, index, count;
 	unsigned long *rm, *rn;
 	unsigned char *src, *dst;
+	unsigned char __user *srcu, *dstu;
 
 	index = (instruction>>8)&15;	/* 0x0F00 */
 	rn = &regs->regs[index];
@@ -206,28 +210,28 @@ static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
 	case 0: /* mov.[bwl] to/from memory via r0+rn */
 		if (instruction & 8) {
 			/* from memory */
-			src = (unsigned char*) *rm;
-			src += regs->regs[0];
-			dst = (unsigned char*) rn;
-			*(unsigned long*)dst = 0;
+			srcu = (unsigned char __user *)*rm;
+			srcu += regs->regs[0];
+			dst = (unsigned char *)rn;
+			*(unsigned long *)dst = 0;
 
 #if !defined(__LITTLE_ENDIAN__)
 			dst += 4-count;
 #endif
-			if (ma->from(dst, src, count))
+			if (ma->from(dst, srcu, count))
 				goto fetch_fault;
 
 			sign_extend(count, dst);
 		} else {
 			/* to memory */
-			src = (unsigned char*) rm;
+			src = (unsigned char *)rm;
 #if !defined(__LITTLE_ENDIAN__)
 			src += 4-count;
 #endif
-			dst = (unsigned char*) *rn;
-			dst += regs->regs[0];
+			dstu = (unsigned char __user *)*rn;
+			dstu += regs->regs[0];
 
-			if (ma->to(dst, src, count))
+			if (ma->to(dstu, src, count))
 				goto fetch_fault;
 		}
 		ret = 0;
@@ -235,10 +239,10 @@ static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
 
 	case 1: /* mov.l Rm,@(disp,Rn) */
 		src = (unsigned char*) rm;
-		dst = (unsigned char*) *rn;
-		dst += (instruction&0x000F)<<2;
+		dstu = (unsigned char __user *)*rn;
+		dstu += (instruction&0x000F)<<2;
 
-		if (ma->to(dst, src, 4))
+		if (ma->to(dstu, src, 4))
 			goto fetch_fault;
 		ret = 0;
 		break;
@@ -247,28 +251,28 @@ static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
 		if (instruction & 4)
 			*rn -= count;
 		src = (unsigned char*) rm;
-		dst = (unsigned char*) *rn;
+		dstu = (unsigned char __user *)*rn;
 #if !defined(__LITTLE_ENDIAN__)
 		src += 4-count;
 #endif
-		if (ma->to(dst, src, count))
+		if (ma->to(dstu, src, count))
 			goto fetch_fault;
 		ret = 0;
 		break;
 
 	case 5: /* mov.l @(disp,Rm),Rn */
-		src = (unsigned char*) *rm;
-		src += (instruction&0x000F)<<2;
-		dst = (unsigned char*) rn;
-		*(unsigned long*)dst = 0;
+		srcu = (unsigned char __user *)*rm;
+		srcu += (instruction & 0x000F) << 2;
+		dst = (unsigned char *)rn;
+		*(unsigned long *)dst = 0;
 
-		if (ma->from(dst, src, 4))
+		if (ma->from(dst, srcu, 4))
 			goto fetch_fault;
 		ret = 0;
 		break;
 
 	case 6:	/* mov.[bwl] from memory, possibly with post-increment */
-		src = (unsigned char*) *rm;
+		srcu = (unsigned char __user *)*rm;
 		if (instruction & 4)
 			*rm += count;
 		dst = (unsigned char*) rn;
@@ -277,7 +281,7 @@ static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
 #if !defined(__LITTLE_ENDIAN__)
 		dst += 4-count;
 #endif
-		if (ma->from(dst, src, count))
+		if (ma->from(dst, srcu, count))
 			goto fetch_fault;
 		sign_extend(count, dst);
 		ret = 0;
@@ -286,28 +290,28 @@ static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
 	case 8:
 		switch ((instruction&0xFF00)>>8) {
 		case 0x81: /* mov.w R0,@(disp,Rn) */
-			src = (unsigned char*) &regs->regs[0];
+			src = (unsigned char *) &regs->regs[0];
 #if !defined(__LITTLE_ENDIAN__)
 			src += 2;
 #endif
-			dst = (unsigned char*) *rm; /* called Rn in the spec */
-			dst += (instruction&0x000F)<<1;
+			dstu = (unsigned char __user *)*rm; /* called Rn in the spec */
+			dstu += (instruction & 0x000F) << 1;
 
-			if (ma->to(dst, src, 2))
+			if (ma->to(dstu, src, 2))
 				goto fetch_fault;
 			ret = 0;
 			break;
 
 		case 0x85: /* mov.w @(disp,Rm),R0 */
-			src = (unsigned char*) *rm;
-			src += (instruction&0x000F)<<1;
-			dst = (unsigned char*) &regs->regs[0];
-			*(unsigned long*)dst = 0;
+			srcu = (unsigned char __user *)*rm;
+			srcu += (instruction & 0x000F) << 1;
+			dst = (unsigned char *) &regs->regs[0];
+			*(unsigned long *)dst = 0;
 
 #if !defined(__LITTLE_ENDIAN__)
 			dst += 2;
 #endif
-			if (ma->from(dst, src, 2))
+			if (ma->from(dst, srcu, 2))
 				goto fetch_fault;
 			sign_extend(2, dst);
 			ret = 0;
@@ -333,7 +337,8 @@ static inline int handle_delayslot(struct pt_regs *regs,
 				   struct mem_access *ma)
 {
 	opcode_t instruction;
-	void *addr = (void *)(regs->pc + instruction_size(old_instruction));
+	void __user *addr = (void __user *)(regs->pc +
+		instruction_size(old_instruction));
 
 	if (copy_from_user(&instruction, addr, sizeof(instruction))) {
 		/* the instruction-fetch faulted */
@@ -511,14 +516,6 @@ int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs,
 	return ret;
 }
 
-#ifdef CONFIG_CPU_HAS_SR_RB
-#define lookup_exception_vector(x)	\
-	__asm__ __volatile__ ("stc r2_bank, %0\n\t" : "=r" ((x)))
-#else
-#define lookup_exception_vector(x)	\
-	__asm__ __volatile__ ("mov r4, %0\n\t" : "=r" ((x)))
-#endif
-
 /*
  * Handle various address error exceptions:
  *  - instruction address error:
@@ -542,7 +539,7 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 
 	/* Intentional ifdef */
 #ifdef CONFIG_CPU_HAS_SR_RB
-	lookup_exception_vector(error_code);
+	error_code = lookup_exception_vector();
 #endif
 
 	oldfs = get_fs();
@@ -559,7 +556,7 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 		}
 
 		set_fs(USER_DS);
-		if (copy_from_user(&instruction, (void *)(regs->pc),
+		if (copy_from_user(&instruction, (void __user *)(regs->pc),
 				   sizeof(instruction))) {
 			/* Argh. Fault on the instruction itself.
 			   This should never happen non-SMP
@@ -589,7 +586,7 @@ uspace_segv:
 			die("unaligned program counter", regs, error_code);
 
 		set_fs(KERNEL_DS);
-		if (copy_from_user(&instruction, (void *)(regs->pc),
+		if (copy_from_user(&instruction, (void __user *)(regs->pc),
 				   sizeof(instruction))) {
 			/* Argh. Fault on the instruction itself.
 			   This should never happen non-SMP
@@ -683,7 +680,7 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5,
 	}
 #endif
 
-	lookup_exception_vector(error_code);
+	error_code = lookup_exception_vector();
 
 	local_irq_enable();
 	CHK_REMOTE_DEBUG(regs);
@@ -739,11 +736,13 @@ asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5,
 				struct pt_regs __regs)
 {
 	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
-	unsigned long error_code;
+	unsigned long inst;
 	struct task_struct *tsk = current;
-#ifdef CONFIG_SH_FPU_EMU
-	unsigned short inst = 0;
 
+	if (kprobe_handle_illslot(regs->pc) == 0)
+		return;
+
+#ifdef CONFIG_SH_FPU_EMU
 	get_user(inst, (unsigned short *)regs->pc + 1);
 	if (!do_fpu_inst(inst, regs)) {
 		get_user(inst, (unsigned short *)regs->pc);
@@ -754,12 +753,12 @@ asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5,
 	/* not a FPU inst. */
 #endif
 
-	lookup_exception_vector(error_code);
+	inst = lookup_exception_vector();
 
 	local_irq_enable();
 	CHK_REMOTE_DEBUG(regs);
 	force_sig(SIGILL, tsk);
-	die_if_no_fixup("illegal slot instruction", regs, error_code);
+	die_if_no_fixup("illegal slot instruction", regs, inst);
 }
 
 asmlinkage void do_exception_error(unsigned long r4, unsigned long r5,
@@ -769,7 +768,7 @@ asmlinkage void do_exception_error(unsigned long r4, unsigned long r5,
 	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	long ex;
 
-	lookup_exception_vector(ex);
+	ex = lookup_exception_vector();
 	die_if_kernel("exception", regs, ex);
 }
 
diff --git a/arch/sh/lib/div64-generic.c b/arch/sh/lib/div64-generic.c
index 4bef3b5..60e76aa 100644
--- a/arch/sh/lib/div64-generic.c
+++ b/arch/sh/lib/div64-generic.c
@@ -3,6 +3,7 @@
  */
 
 #include <linux/types.h>
+#include <asm/div64.h>
 
 extern uint64_t __xdiv64_32(u64 n, u32 d);
 
diff --git a/arch/sh/lib/io.c b/arch/sh/lib/io.c
index 4f54ec4..88dfe6e 100644
--- a/arch/sh/lib/io.c
+++ b/arch/sh/lib/io.c
@@ -14,12 +14,12 @@
 #include <linux/module.h>
 #include <linux/io.h>
 
-void __raw_readsl(unsigned long addr, void *datap, int len)
+void __raw_readsl(const void __iomem *addr, void *datap, int len)
 {
 	u32 *data;
 
 	for (data = datap; (len != 0) && (((u32)data & 0x1f) != 0); len--)
-		*data++ = ctrl_inl(addr);
+		*data++ = __raw_readl(addr);
 
 	if (likely(len >= (0x20 >> 2))) {
 		int tmp2, tmp3, tmp4, tmp5, tmp6;
@@ -59,11 +59,11 @@ void __raw_readsl(unsigned long addr, void *datap, int len)
 	}
 
 	for (; len != 0; len--)
-		*data++ = ctrl_inl(addr);
+		*data++ = __raw_readl(addr);
 }
 EXPORT_SYMBOL(__raw_readsl);
 
-void __raw_writesl(unsigned long addr, const void *data, int len)
+void __raw_writesl(void __iomem *addr, const void *data, int len)
 {
 	if (likely(len != 0)) {
 		int tmp1;
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 8a03926..555ec97 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -132,7 +132,11 @@ config ARCH_SELECT_MEMORY_MODEL
 
 config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
-	depends on SPARSEMEM
+	depends on SPARSEMEM && MMU
+
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
+	depends on SPARSEMEM && MMU
 
 config ARCH_MEMORY_PROBE
 	def_bool y
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index 0e189cc..5ba067b 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -130,12 +130,18 @@ static int __init cache_debugfs_init(void)
 	dcache_dentry = debugfs_create_file("dcache", S_IRUSR, sh_debugfs_root,
 					    (unsigned int *)CACHE_TYPE_DCACHE,
 					    &cache_debugfs_fops);
+	if (!dcache_dentry)
+		return -ENOMEM;
 	if (IS_ERR(dcache_dentry))
 		return PTR_ERR(dcache_dentry);
 
 	icache_dentry = debugfs_create_file("icache", S_IRUSR, sh_debugfs_root,
 					    (unsigned int *)CACHE_TYPE_ICACHE,
 					    &cache_debugfs_fops);
+	if (!icache_dentry) {
+		debugfs_remove(dcache_dentry);
+		return -ENOMEM;
+	}
 	if (IS_ERR(icache_dentry)) {
 		debugfs_remove(dcache_dentry);
 		return PTR_ERR(icache_dentry);
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 1fdc8d9..5cfe08d 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -261,7 +261,7 @@ void flush_dcache_page(struct page *page)
 }
 
 /* TODO: Selective icache invalidation through IC address array.. */
-static inline void __uses_jump_to_uncached flush_icache_all(void)
+static void __uses_jump_to_uncached flush_icache_all(void)
 {
 	unsigned long flags, ccr;
 
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 64b8f7f..9f8ea3a 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -16,14 +16,6 @@
 #include <asm/addrspace.h>
 #include <asm/io.h>
 
-struct dma_coherent_mem {
-	void		*virt_base;
-	u32		device_base;
-	int		size;
-	int		flags;
-	unsigned long	*bitmap;
-};
-
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
 {
@@ -44,7 +36,7 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 	 */
 	dma_cache_sync(dev, ret, size, DMA_BIDIRECTIONAL);
 
-	ret_nocache = ioremap_nocache(virt_to_phys(ret), size);
+	ret_nocache = (void __force *)ioremap_nocache(virt_to_phys(ret), size);
 	if (!ret_nocache) {
 		free_pages((unsigned long)ret, order);
 		return NULL;
@@ -58,12 +50,10 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t dma_handle)
 {
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
 	if (!dma_release_from_coherent(dev, order, vaddr)) {
 		WARN_ON(irqs_disabled());	/* for portability */
-		BUG_ON(mem && mem->flags & DMA_MEMORY_EXCLUSIVE);
 		free_pages((unsigned long)phys_to_virt(dma_handle), order);
 		iounmap(vaddr);
 	}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 0c776fd..898d477 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -2,7 +2,7 @@
  * Page fault handler for SH with an MMU.
  *
  *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2003 - 2007  Paul Mundt
+ *  Copyright (C) 2003 - 2008  Paul Mundt
  *
  *  Based on linux/arch/i386/mm/fault.c:
  *   Copyright (C) 1995  Linus Torvalds
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
+#include <linux/marker.h>
 #include <asm/io_trapped.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
@@ -37,10 +38,10 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	int fault;
 	siginfo_t info;
 
-#ifdef CONFIG_SH_KGDB
-	if (kgdb_nofault && kgdb_bus_err_hook)
-		kgdb_bus_err_hook();
-#endif
+	/*
+	 * We don't bother with any notifier callbacks here, as they are
+	 * all handled through the __do_page_fault() fast-path.
+	 */
 
 	tsk = current;
 	si_code = SEGV_MAPERR;
@@ -61,7 +62,6 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		pgd = get_TTB() + offset;
 		pgd_k = swapper_pg_dir + offset;
 
-		/* This will never happen with the folded page table. */
 		if (!pgd_present(*pgd)) {
 			if (!pgd_present(*pgd_k))
 				goto bad_area_nosemaphore;
@@ -71,9 +71,13 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 
 		pud = pud_offset(pgd, address);
 		pud_k = pud_offset(pgd_k, address);
-		if (pud_present(*pud) || !pud_present(*pud_k))
-			goto bad_area_nosemaphore;
-		set_pud(pud, *pud_k);
+
+		if (!pud_present(*pud)) {
+			if (!pud_present(*pud_k))
+				goto bad_area_nosemaphore;
+			set_pud(pud, *pud_k);
+			return;
+		}
 
 		pmd = pmd_offset(pud, address);
 		pmd_k = pmd_offset(pud_k, address);
@@ -242,6 +246,25 @@ do_sigbus:
 		goto no_context;
 }
 
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+	int ret = 0;
+
+	trace_mark(kernel_arch_trap_entry, "trap_id %d ip #p%ld",
+		   trap >> 5, instruction_pointer(regs));
+
+#ifdef CONFIG_KPROBES
+	if (!user_mode(regs)) {
+		preempt_disable();
+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
+			ret = 1;
+		preempt_enable();
+	}
+#endif
+
+	return ret;
+}
+
 #ifdef CONFIG_SH_STORE_QUEUES
 /*
  * This is a special case for the SH-4 store queues, as pages for this
@@ -265,12 +288,18 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
+	int ret = 0;
+
+	if (notify_page_fault(regs, lookup_exception_vector()))
+		goto out;
 
 #ifdef CONFIG_SH_KGDB
 	if (kgdb_nofault && kgdb_bus_err_hook)
 		kgdb_bus_err_hook();
 #endif
 
+	ret = 1;
+
 	/*
 	 * We don't take page faults for P1, P2, and parts of P4, these
 	 * are always mapped, whether it be due to legacy behaviour in
@@ -280,24 +309,23 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
 		pgd = pgd_offset_k(address);
 	} else {
 		if (unlikely(address >= TASK_SIZE || !current->mm))
-			return 1;
+			goto out;
 
 		pgd = pgd_offset(current->mm, address);
 	}
 
 	pud = pud_offset(pgd, address);
 	if (pud_none_or_clear_bad(pud))
-		return 1;
+		goto out;
 	pmd = pmd_offset(pud, address);
 	if (pmd_none_or_clear_bad(pmd))
-		return 1;
-
+		goto out;
 	pte = pte_offset_kernel(pmd, address);
 	entry = *pte;
 	if (unlikely(pte_none(entry) || pte_not_present(entry)))
-		return 1;
+		goto out;
 	if (unlikely(writeaccess && !pte_write(entry)))
-		return 1;
+		goto out;
 
 	if (writeaccess)
 		entry = pte_mkdirty(entry);
@@ -314,5 +342,8 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
 	set_pte(pte, entry);
 	update_mmu_cache(NULL, address, entry);
 
-	return 0;
+	ret = 0;
+out:
+	trace_mark(kernel_arch_trap_exit, MARK_NOARGS);
+	return ret;
 }
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index b75a7ac..4abf000 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -23,7 +23,19 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD];
-unsigned long cached_to_uncached = 0;
+
+#ifdef CONFIG_SUPERH32
+/*
+ * Handle trivial transitions between cached and uncached
+ * segments, making use of the 1:1 mapping relationship in
+ * 512MB lowmem.
+ *
+ * This is the offset of the uncached section from its cached alias.
+ * Default value only valid in 29 bit mode, in 32bit mode will be
+ * overridden in pmb_init.
+ */
+unsigned long cached_to_uncached = P2SEG - P1SEG;
+#endif
 
 #ifdef CONFIG_MMU
 static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
@@ -58,9 +70,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 	}
 
 	set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot));
-
-	if (cached_to_uncached)
-		flush_tlb_one(get_asid(), addr);
+	flush_tlb_one(get_asid(), addr);
 }
 
 /*
@@ -113,7 +123,6 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
 		if (!pmd_present(*pmd)) {
 			pte_t *pte_table;
 			pte_table = (pte_t *)alloc_bootmem_low_pages(PAGE_SIZE);
-			memset(pte_table, 0, PAGE_SIZE);
 			pmd_populate_kernel(&init_mm, pmd, pte_table);
 		}
 
@@ -165,15 +174,6 @@ void __init paging_init(void)
 #ifdef CONFIG_SUPERH32
 	/* Set up the uncached fixmap */
 	set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
-
-#ifdef CONFIG_29BIT
-	/*
-	 * Handle trivial transitions between cached and uncached
-	 * segments, making use of the 1:1 mapping relationship in
-	 * 512MB lowmem.
-	 */
-	cached_to_uncached = P2SEG - P1SEG;
-#endif
 #endif
 }
 
@@ -265,6 +265,35 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
+#if THREAD_SHIFT < PAGE_SHIFT
+static struct kmem_cache *thread_info_cache;
+
+struct thread_info *alloc_thread_info(struct task_struct *tsk)
+{
+	struct thread_info *ti;
+
+	ti = kmem_cache_alloc(thread_info_cache, GFP_KERNEL);
+	if (unlikely(ti == NULL))
+		return NULL;
+#ifdef CONFIG_DEBUG_STACK_USAGE
+	memset(ti, 0, THREAD_SIZE);
+#endif
+	return ti;
+}
+
+void free_thread_info(struct thread_info *ti)
+{
+	kmem_cache_free(thread_info_cache, ti);
+}
+
+void thread_info_cache_init(void)
+{
+	thread_info_cache = kmem_cache_create("thread_info", THREAD_SIZE,
+					      THREAD_SIZE, 0, NULL);
+	BUG_ON(thread_info_cache == NULL);
+}
+#endif /* THREAD_SHIFT < PAGE_SHIFT */
+
 #ifdef CONFIG_MEMORY_HOTPLUG
 int arch_add_memory(int nid, u64 start, u64 size)
 {
@@ -292,4 +321,4 @@ int memory_add_physaddr_to_nid(u64 addr)
 }
 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 #endif
-#endif
+#endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/sh/mm/pg-nommu.c b/arch/sh/mm/pg-nommu.c
index 677dd57..91ed4e6 100644
--- a/arch/sh/mm/pg-nommu.c
+++ b/arch/sh/mm/pg-nommu.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <asm/page.h>
+#include <asm/uaccess.h>
 
 void copy_page(void *to, void *from)
 {
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index cef7276..8424167 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -394,6 +394,8 @@ static int __init pmb_debugfs_init(void)
 
 	dentry = debugfs_create_file("pmb", S_IFREG | S_IRUGO,
 				     sh_debugfs_root, NULL, &pmb_debugfs_fops);
+	if (!dentry)
+		return -ENOMEM;
 	if (IS_ERR(dentry))
 		return PTR_ERR(dentry);
 
diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c
index 15111bc..71c742b 100644
--- a/arch/sh/mm/tlb-nommu.c
+++ b/arch/sh/mm/tlb-nommu.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <asm/pgtable.h>
+#include <asm/tlbflush.h>
 
 /*
  * Nothing too terribly exciting here ..
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 0a11cc08..d4fb11f 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -30,6 +30,7 @@ HP6XX			SH_HP6XX
 DREAMCAST		SH_DREAMCAST
 SNAPGEAR		SH_SECUREEDGE5410
 EDOSK7705		SH_EDOSK7705
+EDOSK7760		SH_EDOSK7760
 SH4202_MICRODEV		SH_SH4202_MICRODEV
 SH03			SH_SH03
 LANDISK			SH_LANDISK
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index a214002..e594559 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -20,6 +20,11 @@ config GENERIC_ISA_DMA
 	bool
 	default y
 
+config GENERIC_GPIO
+	bool
+	help
+	  Generic GPIO API support
+
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
@@ -32,6 +37,8 @@ config HZ
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "General machine setup"
 
 config SMP
@@ -69,6 +76,9 @@ config SPARC
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB if !SMP
 	select HAVE_ARCH_TRACEHOOK
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select RTC_CLASS
+	select RTC_DRV_M48T59
 
 # Identify this as a Sparc32 build
 config SPARC32
@@ -204,17 +214,6 @@ config SUN_PM
 	  Enable power management and CPU standby features on supported
 	  SPARC platforms.
 
-config SUN4
-	bool "Support for SUN4 machines (disables SUN4[CDM] support)"
-	depends on !SMP
-	default n
-	help
-	  Say Y here if, and only if, your machine is a sun4. Note that
-	  a kernel compiled with this option will run only on sun4.
-	  (And the current version will probably work only on sun4/330.)
-
-if !SUN4
-
 config PCI
 	bool "Support for PCI and PS/2 keyboard/mouse"
 	help
@@ -227,11 +226,6 @@ config PCI_SYSCALL
 
 source "drivers/pci/Kconfig"
 
-endif
-
-config NO_DMA
-	def_bool !PCI
-
 config SUN_OPENPROMFS
 	tristate "Openprom tree appears in /proc/openprom"
 	help
@@ -263,9 +257,7 @@ source "net/Kconfig"
 
 source "drivers/Kconfig"
 
-if !SUN4
 source "drivers/sbus/char/Kconfig"
-endif
 
 # This one must be before the filesystem configs. -DaveM
 
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index a5f0ce7..2d2769d 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -15,14 +15,11 @@ header-y += signal_32.h
 header-y += signal_64.h
 header-y += stat_32.h
 header-y += stat_64.h
-header-y += statfs_32.h
-header-y += statfs_64.h
 header-y += unistd_32.h
 header-y += unistd_64.h
 
 header-y += apc.h
 header-y += asi.h
-header-y += bpp.h
 header-y += display7seg.h
 header-y += envctrl.h
 header-y += fbio.h
@@ -41,5 +38,4 @@ header-y += reg_64.h
 header-y += traps.h
 header-y += uctx.h
 header-y += utrap.h
-header-y += vfc_ioctls.h
 header-y += watchdog.h
diff --git a/arch/sparc/include/asm/asmmacro.h b/arch/sparc/include/asm/asmmacro.h
index a619a4d..a995bf8 100644
--- a/arch/sparc/include/asm/asmmacro.h
+++ b/arch/sparc/include/asm/asmmacro.h
@@ -34,12 +34,7 @@
 /* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+
    likes byte accesses. These are to avoid ifdef mania. */
 
-#ifdef CONFIG_SUN4
-#define lduXa	lduha
-#define stXa	stha
-#else
 #define lduXa	lduba
 #define stXa	stba
-#endif
 
 #endif /* !(_SPARC_ASMMACRO_H) */
diff --git a/arch/sparc/include/asm/bpp.h b/arch/sparc/include/asm/bpp.h
deleted file mode 100644
index 31f515e..0000000
--- a/arch/sparc/include/asm/bpp.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _SPARC_BPP_H
-#define _SPARC_BPP_H
-
-/*
- * Copyright (c) 1995 Picture Elements
- *	Stephen Williams
- *	Gus Baldauf
- *
- * Linux/SPARC port by Peter Zaitcev.
- * Integration into SPARC tree by Tom Dyas.
- */
-
-#include  <linux/ioctl.h>
-
-/*
- * This is a driver that supports IEEE Std 1284-1994 communications
- * with compliant or compatible devices. It will use whatever features
- * the device supports, prefering those that are typically faster.
- *
- * When the device is opened, it is left in COMPATIBILITY mode, and
- * writes work like any printer device. The driver only attempt to
- * negotiate 1284 modes when needed so that plugs can be pulled,
- * switch boxes switched, etc., without disrupting things. It will
- * also leave the device in compatibility mode when closed.
- */
-
-
-
-/*
- * This driver also supplies ioctls to manually manipulate the
- * pins. This is great for testing devices, or writing code to deal
- * with bizzarro-mode of the ACME Special TurboThingy Plus.
- *
- * NOTE: These ioctl currently do not interact well with
- * read/write. Caveat emptor.
- *
- * PUT_PINS allows us to assign the sense of all the pins, including
- * the data pins if being driven by the host. The GET_PINS returns the
- * pins that the peripheral drives, including data if appropriate.
- */
-
-# define BPP_PUT_PINS _IOW('B', 1, int)
-# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
-# define BPP_PUT_DATA _IOW('B', 3, int)
-# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
-
-/*
- * Set the data bus to input mode. Disengage the data bin driver and
- * be prepared to read values from the peripheral. If the arg is 0,
- * then revert the bus to output mode.
- */
-# define BPP_SET_INPUT _IOW('B', 5, int)
-
-/*
- * These bits apply to the PUT operation...
- */
-# define BPP_PP_nStrobe   0x0001
-# define BPP_PP_nAutoFd   0x0002
-# define BPP_PP_nInit     0x0004
-# define BPP_PP_nSelectIn 0x0008
-
-/*
- * These apply to the GET operation, which also reads the current value
- * of the previously put values. A bit mask of these will be returned
- * as a bit mask in the return code of the ioctl().
- */
-# define BPP_GP_nAck   0x0100
-# define BPP_GP_Busy   0x0200
-# define BPP_GP_PError 0x0400
-# define BPP_GP_Select 0x0800
-# define BPP_GP_nFault 0x1000
-
-#endif
diff --git a/arch/sparc/include/asm/bugs.h b/arch/sparc/include/asm/bugs.h
index e179bc1..61d86bb 100644
--- a/arch/sparc/include/asm/bugs.h
+++ b/arch/sparc/include/asm/bugs.h
@@ -7,10 +7,6 @@
 #include <asm/cpudata.h>
 #endif
 
-#ifdef CONFIG_SPARC64
-#include <asm/sstate.h>
-#endif
-
 extern unsigned long loops_per_jiffy;
 
 static void __init check_bugs(void)
@@ -18,7 +14,4 @@ static void __init check_bugs(void)
 #if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
 	cpu_data(0).udelay_val = loops_per_jiffy;
 #endif
-#ifdef CONFIG_SPARC64
-	sstate_running();
-#endif
 }
diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
index 532975e..7da7c13 100644
--- a/arch/sparc/include/asm/cpudata_64.h
+++ b/arch/sparc/include/asm/cpudata_64.h
@@ -86,7 +86,6 @@ extern struct trap_per_cpu trap_block[NR_CPUS];
 extern void init_cur_cpu_trap(struct thread_info *);
 extern void setup_tba(void);
 extern int ncpus_probed;
-extern void __init cpu_probe(void);
 extern const struct seq_operations cpuinfo_op;
 
 extern unsigned long real_hard_smp_processor_id(void);
diff --git a/arch/sparc/include/asm/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h
index f3a641e..8a57ea0 100644
--- a/arch/sparc/include/asm/dma-mapping_32.h
+++ b/arch/sparc/include/asm/dma-mapping_32.h
@@ -1,11 +1,60 @@
 #ifndef _ASM_SPARC_DMA_MAPPING_H
 #define _ASM_SPARC_DMA_MAPPING_H
 
+#include <linux/types.h>
 
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif /* PCI */
+struct device;
+struct scatterlist;
+struct page;
+
+#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
+
+extern int dma_supported(struct device *dev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 dma_mask);
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+extern void dma_free_coherent(struct device *dev, size_t size,
+			      void *cpu_addr, dma_addr_t dma_handle);
+extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+				 size_t size,
+				 enum dma_data_direction direction);
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+			     size_t size,
+			     enum dma_data_direction direction);
+extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
+			       unsigned long offset, size_t size,
+			       enum dma_data_direction direction);
+extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+			   size_t size, enum dma_data_direction direction);
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg,
+		      int nents, enum dma_data_direction direction);
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+			 int nents, enum dma_data_direction direction);
+extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+				    size_t size,
+				    enum dma_data_direction direction);
+extern void dma_sync_single_for_device(struct device *dev,
+				       dma_addr_t dma_handle,
+				       size_t size,
+				       enum dma_data_direction direction);
+extern void dma_sync_single_range_for_cpu(struct device *dev,
+					  dma_addr_t dma_handle,
+					  unsigned long offset,
+					  size_t size,
+					  enum dma_data_direction direction);
+extern void dma_sync_single_range_for_device(struct device *dev,
+					     dma_addr_t dma_handle,
+					     unsigned long offset, size_t size,
+					     enum dma_data_direction direction);
+extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+				int nelems, enum dma_data_direction direction);
+extern void dma_sync_sg_for_device(struct device *dev,
+				   struct scatterlist *sg, int nelems,
+				   enum dma_data_direction direction);
+extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
+extern int dma_get_cache_alignment(void);
+
+#define dma_alloc_noncoherent	dma_alloc_coherent
+#define dma_free_noncoherent	dma_free_coherent
 
 #endif /* _ASM_SPARC_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h
index aa1d90a..b554927 100644
--- a/arch/sparc/include/asm/dma.h
+++ b/arch/sparc/include/asm/dma.h
@@ -1,8 +1,139 @@
-#ifndef ___ASM_SPARC_DMA_H
-#define ___ASM_SPARC_DMA_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/dma_64.h>
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+#define MAX_DMA_ADDRESS  (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
 #else
-#include <asm/dma_32.h>
+#define isa_dma_bridge_buggy 	(0)
 #endif
+
+#ifdef CONFIG_SPARC32
+
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+struct page;
+struct device;
+struct scatterlist;
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, struct device *, char *, unsigned long)
+BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct device *, struct scatterlist *, int)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, struct device *, __u32, unsigned long)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct device *, struct scatterlist *, int)
+
+#define mmu_get_scsi_one(dev,vaddr,len) BTFIXUP_CALL(mmu_get_scsi_one)(dev,vaddr,len)
+#define mmu_get_scsi_sgl(dev,sg,sz) BTFIXUP_CALL(mmu_get_scsi_sgl)(dev,sg,sz)
+#define mmu_release_scsi_one(dev,vaddr,len) BTFIXUP_CALL(mmu_release_scsi_one)(dev,vaddr,len)
+#define mmu_release_scsi_sgl(dev,sg,sz) BTFIXUP_CALL(mmu_release_scsi_sgl)(dev,sg,sz)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int, mmu_map_dma_area, struct device *, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, struct device *, unsigned long busa, int len)
+
+#define mmu_map_dma_area(dev,pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(dev,pba,va,a,len)
+#define mmu_unmap_dma_area(dev,ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(dev,ba,len)
 #endif
+
+#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_32.h b/arch/sparc/include/asm/dma_32.h
deleted file mode 100644
index cf7189c..0000000
--- a/arch/sparc/include/asm/dma_32.h
+++ /dev/null
@@ -1,288 +0,0 @@
-/* include/asm/dma.h
- *
- * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _ASM_SPARC_DMA_H
-#define _ASM_SPARC_DMA_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/vac-ops.h>  /* for invalidate's, etc. */
-#include <asm/sbus.h>
-#include <asm/delay.h>
-#include <asm/oplib.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <linux/spinlock.h>
-
-struct page;
-extern spinlock_t  dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* These are irrelevant for Sparc DMA, but we leave it in so that
- * things can compile.
- */
-#define MAX_DMA_CHANNELS 8
-#define MAX_DMA_ADDRESS  (~0UL)
-#define DMA_MODE_READ    1
-#define DMA_MODE_WRITE   2
-
-/* Useful constants */
-#define SIZE_16MB      (16*1024*1024)
-#define SIZE_64K       (64*1024)
-
-/* SBUS DMA controller reg offsets */
-#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
-#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
-#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
-#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
-
-/* DVMA chip revisions */
-enum dvma_rev {
-	dvmarev0,
-	dvmaesc1,
-	dvmarev1,
-	dvmarev2,
-	dvmarev3,
-	dvmarevplus,
-	dvmahme
-};
-
-#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct sbus_dma {
-	struct sbus_dma *next;
-	struct sbus_dev *sdev;
-	void __iomem *regs;
-
-	/* Status, misc info */
-	int node;                /* Prom node for this DMA device */
-	int running;             /* Are we doing DMA now? */
-	int allocated;           /* Are we "owned" by anyone yet? */
-
-	/* Transfer information. */
-	unsigned long addr;      /* Start address of current transfer */
-	int nbytes;              /* Size of current transfer */
-	int realbytes;           /* For splitting up large transfers, etc. */
-
-	/* DMA revision */
-	enum dvma_rev revision;
-};
-
-extern struct sbus_dma *dma_chain;
-
-/* Broken hardware... */
-#ifdef CONFIG_SUN4
-/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
- * Or is rev0 present only on sun4 boxes? -jj */
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
-#else
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
-#endif
-#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
-
-/* Main routines in dma.c */
-extern void dvma_init(struct sbus_bus *);
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
-#define DMA_VERS0        0x00000000        /* Sunray DMA version */
-#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
-#define DMA_VERS1        0x80000000        /* DMA rev 1 */
-#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
-#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
-#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
-#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
-#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
-#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
-#define DMA_RST_BPP      DMA_RST_SCSI      /* Reset the BPP controller */
-#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
-#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
-#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
-#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
-#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
-#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
-#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
-#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
-#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
-#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32       0x00040000        /* SCSI/BPP: 32byte bursts */
-#define DMA_BRST16       0x00000000        /* SCSI/BPP: 16byte bursts */
-#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
-#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
-#define DMA_BPP_ON       DMA_SCSI_ON       /* Enable BPP dma */
-#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
-#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
-#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1       0x01
-#define DMA_BURST2       0x02
-#define DMA_BURST4       0x04
-#define DMA_BURST8       0x08
-#define DMA_BURST16      0x10
-#define DMA_BURST32      0x20
-#define DMA_BURST64      0x40
-#define DMA_BURSTBITS    0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
-#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
-#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
-#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
-#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
-#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
-#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
-#define DMA_BEGINDMA_W(regs) \
-        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
-#define DMA_BEGINDMA_R(regs) \
-        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done.  So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler.  You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
-        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
-   } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
-	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
-   } while(0)
-
-#if 0	/* P3 this stuff is inline in ledma.c:init_restart_ledma() */
-/* Pause until counter runs out or BIT isn't set in the DMA condition
- * register.
- */
-static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
-				       unsigned long bit)
-{
-	int ctr = 50000;   /* Let's find some bugs ;) */
-
-	/* Busy wait until the bit is not set any more */
-	while((regs->cond_reg&bit) && (ctr>0)) {
-		ctr--;
-		__delay(5);
-	}
-
-	/* Check for bogus outcome. */
-	if(!ctr)
-		panic("DMA timeout");
-}
-
-/* Reset the friggin' thing... */
-#define DMA_RESET(dma) do { \
-	struct sparc_dma_registers *regs = dma->regs;                      \
-	/* Let the current FIFO drain itself */                            \
-	sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
-	/* Reset the logic */                                              \
-	regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
-	__delay(400);                         /* let the bits set ;) */    \
-	regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
-	sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
-	/* Enable FAST transfers if available */                           \
-	if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
-	dma->running = 0;                                                  \
-} while(0)
-#endif
-
-#define for_each_dvma(dma) \
-        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
-
-extern int get_dma_list(char *);
-extern int request_dma(unsigned int, __const__ char *);
-extern void free_dma(unsigned int);
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy	(0)
-#endif
-
-/* Routines for data transfer buffers. */
-BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
-BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
-
-#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
-#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
-
-/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
-BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
-
-#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
-#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
-#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
-#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
-
-/*
- * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
- *
- * The mmu_map_dma_area establishes two mappings in one go.
- * These mappings point to pages normally mapped at 'va' (linear address).
- * First mapping is for CPU visible address at 'a', uncached.
- * This is an alias, but it works because it is an uncached mapping.
- * Second mapping is for device visible address, or "bus" address.
- * The bus address is returned at '*pba'.
- *
- * These functions seem distinct, but are hard to split. On sun4c,
- * at least for now, 'a' is equal to bus address, and retured in *pba.
- * On sun4m, page attributes depend on the CPU type, so we have to
- * know if we are mapping RAM or I/O, so it has to be an additional argument
- * to a separate mapping function for CPU visible mappings.
- */
-BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
-BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
-BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
-
-#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
-#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
-#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
-
-#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h
deleted file mode 100644
index 46a8aec..0000000
--- a/arch/sparc/include/asm/dma_64.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * include/asm/dma.h
- *
- * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _ASM_SPARC64_DMA_H
-#define _ASM_SPARC64_DMA_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-
-#include <asm/sbus.h>
-#include <asm/delay.h>
-#include <asm/oplib.h>
-
-/* These are irrelevant for Sparc DMA, but we leave it in so that
- * things can compile.
- */
-#define MAX_DMA_CHANNELS 8
-#define DMA_MODE_READ    1
-#define DMA_MODE_WRITE   2
-#define MAX_DMA_ADDRESS  (~0UL)
-
-/* Useful constants */
-#define SIZE_16MB      (16*1024*1024)
-#define SIZE_64K       (64*1024)
-
-/* SBUS DMA controller reg offsets */
-#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
-#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
-#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
-#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
-
-/* DVMA chip revisions */
-enum dvma_rev {
-	dvmarev0,
-	dvmaesc1,
-	dvmarev1,
-	dvmarev2,
-	dvmarev3,
-	dvmarevplus,
-	dvmahme
-};
-
-#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct sbus_dma {
-	struct sbus_dma *next;
-	struct sbus_dev *sdev;
-	void __iomem *regs;
-
-	/* Status, misc info */
-	int node;                /* Prom node for this DMA device */
-	int running;             /* Are we doing DMA now? */
-	int allocated;           /* Are we "owned" by anyone yet? */
-
-	/* Transfer information. */
-	u32 addr;                /* Start address of current transfer */
-	int nbytes;              /* Size of current transfer */
-	int realbytes;           /* For splitting up large transfers, etc. */
-
-	/* DMA revision */
-	enum dvma_rev revision;
-};
-
-extern struct sbus_dma *dma_chain;
-
-/* Broken hardware... */
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
-#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
-
-/* Main routines in dma.c */
-extern void dvma_init(struct sbus_bus *);
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
-#define DMA_VERS0        0x00000000        /* Sunray DMA version */
-#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
-#define DMA_VERS1        0x80000000        /* DMA rev 1 */
-#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
-#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
-#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
-#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
-#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
-#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
-#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
-#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
-#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
-#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
-#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
-#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
-#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
-#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
-#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
-#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
-#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
-#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
-#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
-#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
-#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
-#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1       0x01
-#define DMA_BURST2       0x02
-#define DMA_BURST4       0x04
-#define DMA_BURST8       0x08
-#define DMA_BURST16      0x10
-#define DMA_BURST32      0x20
-#define DMA_BURST64      0x40
-#define DMA_BURSTBITS    0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs)    ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
-#define DMA_WRITE_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
-#define DMA_OFF(__regs)		\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp &= ~DMA_ENABLE; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_INTSOFF(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp &= ~DMA_INT_ENAB; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_INTSON(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= DMA_INT_ENAB; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_PUNTFIFO(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= DMA_FIFO_INV; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_SETSTART(__regs, __addr)	\
-	sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
-#define DMA_BEGINDMA_W(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_BEGINDMA_R(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
-	tmp &= ~DMA_ST_WRITE; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done.  So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler.  You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
-        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
-   } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
-	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
-   } while(0)
-
-#define for_each_dvma(dma) \
-        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/arch/sparc/include/asm/ebus.h b/arch/sparc/include/asm/ebus.h
deleted file mode 100644
index 83a6d16..0000000
--- a/arch/sparc/include/asm/ebus.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_EBUS_H
-#define ___ASM_SPARC_EBUS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/ebus_64.h>
-#else
-#include <asm/ebus_32.h>
-#endif
-#endif
diff --git a/arch/sparc/include/asm/ebus_32.h b/arch/sparc/include/asm/ebus_32.h
deleted file mode 100644
index f91f0b2..0000000
--- a/arch/sparc/include/asm/ebus_32.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * ebus.h: PCI to Ebus pseudo driver software state.
- *
- * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
- *
- * Adopted for sparc by V. Roganov and G. Raiko.
- */
-
-#ifndef __SPARC_EBUS_H
-#define __SPARC_EBUS_H
-
-#ifndef _LINUX_IOPORT_H
-#include <linux/ioport.h>
-#endif
-#include <linux/of_device.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-
-struct linux_ebus_child {
-	struct linux_ebus_child		*next;
-	struct linux_ebus_device	*parent;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-
-struct linux_ebus_device {
-	struct of_device		ofdev;
-	struct linux_ebus_device	*next;
-	struct linux_ebus_child		*children;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
-
-struct linux_ebus {
-	struct of_device		ofdev;
-	struct linux_ebus		*next;
-	struct linux_ebus_device	*devices;
-	struct linux_pbm_info		*parent;
-	struct pci_dev			*self;
-	struct device_node		*prom_node;
-};
-#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
-
-struct linux_ebus_dma {
-	unsigned int dcsr;
-	unsigned int dacr;
-	unsigned int dbcr;
-};
-
-#define EBUS_DCSR_INT_PEND	0x00000001
-#define EBUS_DCSR_ERR_PEND	0x00000002
-#define EBUS_DCSR_DRAIN		0x00000004
-#define EBUS_DCSR_INT_EN	0x00000010
-#define EBUS_DCSR_RESET		0x00000080
-#define EBUS_DCSR_WRITE		0x00000100
-#define EBUS_DCSR_EN_DMA	0x00000200
-#define EBUS_DCSR_CYC_PEND	0x00000400
-#define EBUS_DCSR_DIAG_RD_DONE	0x00000800
-#define EBUS_DCSR_DIAG_WR_DONE	0x00001000
-#define EBUS_DCSR_EN_CNT	0x00002000
-#define EBUS_DCSR_TC		0x00004000
-#define EBUS_DCSR_DIS_CSR_DRN	0x00010000
-#define EBUS_DCSR_BURST_SZ_MASK	0x000c0000
-#define EBUS_DCSR_BURST_SZ_1	0x00080000
-#define EBUS_DCSR_BURST_SZ_4	0x00000000
-#define EBUS_DCSR_BURST_SZ_8	0x00040000
-#define EBUS_DCSR_BURST_SZ_16	0x000c0000
-#define EBUS_DCSR_DIAG_EN	0x00100000
-#define EBUS_DCSR_DIS_ERR_PEND	0x00400000
-#define EBUS_DCSR_TCI_DIS	0x00800000
-#define EBUS_DCSR_EN_NEXT	0x01000000
-#define EBUS_DCSR_DMA_ON	0x02000000
-#define EBUS_DCSR_A_LOADED	0x04000000
-#define EBUS_DCSR_NA_LOADED	0x08000000
-#define EBUS_DCSR_DEV_ID_MASK	0xf0000000
-
-extern struct linux_ebus		*ebus_chain;
-
-extern void ebus_init(void);
-
-#define for_each_ebus(bus)						\
-        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
-
-#define for_each_ebusdev(dev, bus)					\
-        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
-
-#define for_each_edevchild(dev, child)					\
-        for((child) = (dev)->children; (child); (child) = (child)->next)
-
-#endif /* !(__SPARC_EBUS_H) */
diff --git a/arch/sparc/include/asm/ebus_64.h b/arch/sparc/include/asm/ebus_64.h
deleted file mode 100644
index 14c6a11..0000000
--- a/arch/sparc/include/asm/ebus_64.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * ebus.h: PCI to Ebus pseudo driver software state.
- *
- * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
- * Copyright (C) 1999 David S. Miller (davem@redhat.com)
- */
-
-#ifndef __SPARC64_EBUS_H
-#define __SPARC64_EBUS_H
-
-#include <linux/of_device.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-
-struct linux_ebus_child {
-	struct linux_ebus_child		*next;
-	struct linux_ebus_device	*parent;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-
-struct linux_ebus_device {
-	struct of_device		ofdev;
-	struct linux_ebus_device	*next;
-	struct linux_ebus_child		*children;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
-
-struct linux_ebus {
-	struct of_device		ofdev;
-	struct linux_ebus		*next;
-	struct linux_ebus_device	*devices;
-	struct pci_dev			*self;
-	int				 index;
-	int				 is_rio;
-	struct device_node		*prom_node;
-};
-#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
-
-struct ebus_dma_info {
-	spinlock_t	lock;
-	void __iomem	*regs;
-
-	unsigned int	flags;
-#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER		0x00000001
-#define EBUS_DMA_FLAG_TCI_DISABLE		0x00000002
-
-	/* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is
-	 * set.
-	 */
-	void (*callback)(struct ebus_dma_info *p, int event, void *cookie);
-	void *client_cookie;
-	unsigned int	irq;
-#define EBUS_DMA_EVENT_ERROR	1
-#define EBUS_DMA_EVENT_DMA	2
-#define EBUS_DMA_EVENT_DEVICE	4
-
-	unsigned char	name[64];
-};
-
-extern int ebus_dma_register(struct ebus_dma_info *p);
-extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on);
-extern void ebus_dma_unregister(struct ebus_dma_info *p);
-extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr,
-			    size_t len);
-extern void ebus_dma_prepare(struct ebus_dma_info *p, int write);
-extern unsigned int ebus_dma_residue(struct ebus_dma_info *p);
-extern unsigned int ebus_dma_addr(struct ebus_dma_info *p);
-extern void ebus_dma_enable(struct ebus_dma_info *p, int on);
-
-extern struct linux_ebus		*ebus_chain;
-
-extern void ebus_init(void);
-
-#define for_each_ebus(bus)						\
-        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
-
-#define for_each_ebusdev(dev, bus)					\
-        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
-
-#define for_each_edevchild(dev, child)					\
-        for((child) = (dev)->children; (child); (child) = (child)->next)
-
-#endif /* !(__SPARC64_EBUS_H) */
diff --git a/arch/sparc/include/asm/ebus_dma.h b/arch/sparc/include/asm/ebus_dma.h
new file mode 100644
index 0000000..f07a5b5
--- /dev/null
+++ b/arch/sparc/include/asm/ebus_dma.h
@@ -0,0 +1,35 @@
+#ifndef __ASM_SPARC_EBUS_DMA_H
+#define __ASM_SPARC_EBUS_DMA_H
+
+struct ebus_dma_info {
+	spinlock_t	lock;
+	void __iomem	*regs;
+
+	unsigned int	flags;
+#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER		0x00000001
+#define EBUS_DMA_FLAG_TCI_DISABLE		0x00000002
+
+	/* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is
+	 * set.
+	 */
+	void (*callback)(struct ebus_dma_info *p, int event, void *cookie);
+	void *client_cookie;
+	unsigned int	irq;
+#define EBUS_DMA_EVENT_ERROR	1
+#define EBUS_DMA_EVENT_DMA	2
+#define EBUS_DMA_EVENT_DEVICE	4
+
+	unsigned char	name[64];
+};
+
+extern int ebus_dma_register(struct ebus_dma_info *p);
+extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on);
+extern void ebus_dma_unregister(struct ebus_dma_info *p);
+extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr,
+			    size_t len);
+extern void ebus_dma_prepare(struct ebus_dma_info *p, int write);
+extern unsigned int ebus_dma_residue(struct ebus_dma_info *p);
+extern unsigned int ebus_dma_addr(struct ebus_dma_info *p);
+extern void ebus_dma_enable(struct ebus_dma_info *p, int on);
+
+#endif /* __ASM_SPARC_EBUS_DMA_H */
diff --git a/arch/sparc/include/asm/elf_32.h b/arch/sparc/include/asm/elf_32.h
index d043f80..381a1b5 100644
--- a/arch/sparc/include/asm/elf_32.h
+++ b/arch/sparc/include/asm/elf_32.h
@@ -105,11 +105,8 @@ typedef struct {
 #define ELF_DATA	ELFDATA2MSB
 
 #define USE_ELF_CORE_DUMP
-#ifndef CONFIG_SUN4
+
 #define ELF_EXEC_PAGESIZE	4096
-#else
-#define ELF_EXEC_PAGESIZE	8192
-#endif
 
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
@@ -126,7 +123,7 @@ typedef struct {
 /* Sun4c has none of the capabilities, most sun4m's have them all.
  * XXX This is gross, set some global variable at boot time. -DaveM
  */
-#define ELF_HWCAP	((ARCH_SUN4C_SUN4) ? 0 : \
+#define ELF_HWCAP	((ARCH_SUN4C) ? 0 : \
 			 (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \
 			  HWCAP_SPARC_SWAP | \
 			  ((srmmu_modtype != Cypress && \
@@ -140,6 +137,6 @@ typedef struct {
 
 #define ELF_PLATFORM	(NULL)
 
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
 
 #endif /* !(__ASMSPARC_ELF_H) */
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
index 0818a13..425c2f9 100644
--- a/arch/sparc/include/asm/elf_64.h
+++ b/arch/sparc/include/asm/elf_64.h
@@ -195,7 +195,7 @@ static inline unsigned int sparc64_elf_hwcap(void)
 
 #define ELF_PLATFORM	(NULL)
 
-#define SET_PERSONALITY(ex, ibcs2)			\
+#define SET_PERSONALITY(ex)				\
 do {	unsigned long new_flags = current_thread_info()->flags; \
 	new_flags &= _TIF_32BIT;			\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
@@ -208,9 +208,7 @@ do {	unsigned long new_flags = current_thread_info()->flags; \
 	else						\
 		clear_thread_flag(TIF_ABI_PENDING);	\
 	/* flush_thread will update pgd cache */	\
-	if (ibcs2)					\
-		set_personality(PER_SVR4);		\
-	else if (current->personality != PER_LINUX32)	\
+	if (current->personality != PER_LINUX32)	\
 		set_personality(PER_LINUX);		\
 } while (0)
 
diff --git a/arch/sparc/include/asm/fhc.h b/arch/sparc/include/asm/fhc.h
index 788cbc4..57f1b30 100644
--- a/arch/sparc/include/asm/fhc.h
+++ b/arch/sparc/include/asm/fhc.h
@@ -1,5 +1,4 @@
-/*
- * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
+/* fhc.h: FHC and Clock board register definitions.
  *
  * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
  */
@@ -7,14 +6,6 @@
 #ifndef _SPARC64_FHC_H
 #define _SPARC64_FHC_H
 
-#include <linux/timer.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/upa.h>
-
-struct linux_fhc;
-
 /* Clock board register offsets. */
 #define CLOCK_CTRL	0x00UL	/* Main control */
 #define CLOCK_STAT1	0x10UL	/* Status one */
@@ -29,21 +20,7 @@ struct linux_fhc;
 #define CLOCK_CTRL_MLED		0x02	/* Mid LED, 1 == on */
 #define CLOCK_CTRL_RLED		0x01	/* RIght LED, 1 == on */
 
-struct linux_central {
-	struct linux_fhc		*child;
-	unsigned long			cfreg;
-	unsigned long			clkregs;
-	unsigned long			clkver;
-	int				slots;
-	struct device_node		*prom_node;
-
-	struct linux_prom_ranges	central_ranges[PROMREG_MAX];
-	int				num_central_ranges;
-};
-
 /* Firehose controller register offsets */
-struct fhc_regs {
-	unsigned long			pregs;	/* FHC internal regs */
 #define FHC_PREGS_ID	0x00UL	/* FHC ID */
 #define  FHC_ID_VERS		0xf0000000 /* Version of this FHC		*/
 #define  FHC_ID_PARTID		0x0ffff000 /* Part ID code (0x0f9f == FHC)	*/
@@ -90,32 +67,14 @@ struct fhc_regs {
 #define  FHC_JTAG_CTRL_MENAB	0x80000000 /* Indicates this is JTAG Master	 */
 #define  FHC_JTAG_CTRL_MNONE	0x40000000 /* Indicates no JTAG Master present	 */
 #define FHC_PREGS_JCMD	0x100UL	/* FHC JTAG Command Register */
-	unsigned long			ireg;	/* FHC IGN reg */
 #define FHC_IREG_IGN	0x00UL	/* This FHC's IGN */
-	unsigned long			ffregs;	/* FHC fanfail regs */
 #define FHC_FFREGS_IMAP	0x00UL	/* FHC Fanfail IMAP */
 #define FHC_FFREGS_ICLR	0x10UL	/* FHC Fanfail ICLR */
-	unsigned long			sregs;	/* FHC system regs */
 #define FHC_SREGS_IMAP	0x00UL	/* FHC System IMAP */
 #define FHC_SREGS_ICLR	0x10UL	/* FHC System ICLR */
-	unsigned long			uregs;	/* FHC uart regs */
 #define FHC_UREGS_IMAP	0x00UL	/* FHC Uart IMAP */
 #define FHC_UREGS_ICLR	0x10UL	/* FHC Uart ICLR */
-	unsigned long			tregs;	/* FHC TOD regs */
 #define FHC_TREGS_IMAP	0x00UL	/* FHC TOD IMAP */
 #define FHC_TREGS_ICLR	0x10UL	/* FHC TOD ICLR */
-};
-
-struct linux_fhc {
-	struct linux_fhc		*next;
-	struct linux_central		*parent;	/* NULL if not central FHC */
-	struct fhc_regs			fhc_regs;
-	int				board;
-	int				jtag_master;
-	struct device_node		*prom_node;
-
-	struct linux_prom_ranges	fhc_ranges[PROMREG_MAX];
-	int				num_fhc_ranges;
-};
 
 #endif /* !(_SPARC64_FHC_H) */
diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
index ae3f00b..c792830 100644
--- a/arch/sparc/include/asm/floppy_32.h
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -6,6 +6,9 @@
 #ifndef __ASM_SPARC_FLOPPY_H
 #define __ASM_SPARC_FLOPPY_H
 
+#include <linux/of.h>
+#include <linux/of_device.h>
+
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -343,7 +346,7 @@ static int sun_floppy_init(void)
 	r.flags = fd_regs[0].which_io;
 	r.start = fd_regs[0].phys_addr;
 	sun_fdc = (struct sun_flpy_controller *)
-	    sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
+	    of_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
 
 	/* Last minute sanity check... */
 	if(sun_fdc->status_82072 == 0xff) {
@@ -385,4 +388,15 @@ static int sparc_eject(void)
 
 #define EXTRA_FLOPPY_PARAMS
 
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({	unsigned long flags; \
+	spin_lock_irqsave(&dma_spin_lock, flags); \
+	flags; \
+})
+
+#define release_dma_lock(__flags) \
+	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
 #endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
index c39db10..36439d6 100644
--- a/arch/sparc/include/asm/floppy_64.h
+++ b/arch/sparc/include/asm/floppy_64.h
@@ -1,6 +1,6 @@
 /* floppy.h: Sparc specific parts of the Floppy driver.
  *
- * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996, 2007, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
  *
  * Ultra/PCI support added: Sep 1997  Eddie C. Dost  (ecd@skynet.be)
@@ -9,18 +9,11 @@
 #ifndef __ASM_SPARC64_FLOPPY_H
 #define __ASM_SPARC64_FLOPPY_H
 
-#include <linux/init.h>
-#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/dma-mapping.h>
 
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/idprom.h>
-#include <asm/oplib.h>
 #include <asm/auxio.h>
-#include <asm/sbus.h>
-#include <asm/irq.h>
-
 
 /*
  * Define this to enable exchanging drive 0 and 1 if only drive 1 is
@@ -50,7 +43,7 @@ struct sun_flpy_controller {
 /* You'll only ever find one controller on an Ultra anyways. */
 static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
 unsigned long fdc_status;
-static struct sbus_dev *floppy_sdev = NULL;
+static struct of_device *floppy_op = NULL;
 
 struct sun_floppy_ops {
 	unsigned char	(*fd_inb) (unsigned long port);
@@ -291,12 +284,11 @@ static int sun_fd_eject(int drive)
 	return 0;
 }
 
-#ifdef CONFIG_PCI
-#include <asm/ebus.h>
+#include <asm/ebus_dma.h>
 #include <asm/ns87303.h>
 
 static struct ebus_dma_info sun_pci_fd_ebus_dma;
-static struct pci_dev *sun_pci_ebus_dev;
+static struct device *sun_floppy_dev;
 static int sun_pci_broken_drive = -1;
 
 struct sun_pci_dma_op {
@@ -377,7 +369,7 @@ static void sun_pci_fd_enable_dma(void)
 	sun_pci_dma_pending.addr = -1U;
 
 	sun_pci_dma_current.addr =
-		pci_map_single(sun_pci_ebus_dev,
+		dma_map_single(sun_floppy_dev,
 			       sun_pci_dma_current.buf,
 			       sun_pci_dma_current.len,
 			       sun_pci_dma_current.direction);
@@ -394,7 +386,7 @@ static void sun_pci_fd_disable_dma(void)
 {
 	ebus_dma_enable(&sun_pci_fd_ebus_dma, 0);
 	if (sun_pci_dma_current.addr != -1U)
-		pci_unmap_single(sun_pci_ebus_dev,
+		dma_unmap_single(sun_floppy_dev,
 				 sun_pci_dma_current.addr,
 				 sun_pci_dma_current.len,
 				 sun_pci_dma_current.direction);
@@ -404,9 +396,9 @@ static void sun_pci_fd_disable_dma(void)
 static void sun_pci_fd_set_dma_mode(int mode)
 {
 	if (mode == DMA_MODE_WRITE)
-		sun_pci_dma_pending.direction = PCI_DMA_TODEVICE;
+		sun_pci_dma_pending.direction = DMA_TO_DEVICE;
 	else
-		sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE;
+		sun_pci_dma_pending.direction = DMA_FROM_DEVICE;
 
 	ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE);
 }
@@ -538,80 +530,84 @@ static int sun_pci_fd_test_drive(unsigned long port, int drive)
 #undef MSR
 #undef DOR
 
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_PCI
-static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
+static int __init ebus_fdthree_p(struct device_node *dp)
 {
-	if (!strcmp(edev->prom_node->name, "fdthree"))
+	if (!strcmp(dp->name, "fdthree"))
 		return 1;
-	if (!strcmp(edev->prom_node->name, "floppy")) {
+	if (!strcmp(dp->name, "floppy")) {
 		const char *compat;
 
-		compat = of_get_property(edev->prom_node,
-					 "compatible", NULL);
+		compat = of_get_property(dp, "compatible", NULL);
 		if (compat && !strcmp(compat, "fdthree"))
 			return 1;
 	}
 	return 0;
 }
-#endif
 
 static unsigned long __init sun_floppy_init(void)
 {
-	char state[128];
-	struct sbus_bus *bus;
-	struct sbus_dev *sdev = NULL;
 	static int initialized = 0;
+	struct device_node *dp;
+	struct of_device *op;
+	const char *prop;
+	char state[128];
 
 	if (initialized)
 		return sun_floppy_types[0];
 	initialized = 1;
 
-	for_all_sbusdev (sdev, bus) {
-		if (!strcmp(sdev->prom_name, "SUNW,fdtwo"))
+	op = NULL;
+
+	for_each_node_by_name(dp, "SUNW,fdtwo") {
+		if (strcmp(dp->parent->name, "sbus"))
+			continue;
+		op = of_find_device_by_node(dp);
+		if (op)
 			break;
 	}
-	if(sdev) {
-		floppy_sdev = sdev;
-		FLOPPY_IRQ = sdev->irqs[0];
+	if (op) {
+		floppy_op = op;
+		FLOPPY_IRQ = op->irqs[0];
 	} else {
-#ifdef CONFIG_PCI
-		struct linux_ebus *ebus;
-		struct linux_ebus_device *edev = NULL;
-		unsigned long config = 0;
+		struct device_node *ebus_dp;
 		void __iomem *auxio_reg;
 		const char *state_prop;
+		unsigned long config;
 
-		for_each_ebus(ebus) {
-			for_each_ebusdev(edev, ebus) {
-				if (ebus_fdthree_p(edev))
-					goto ebus_done;
+		dp = NULL;
+		for_each_node_by_name(ebus_dp, "ebus") {
+			for (dp = ebus_dp->child; dp; dp = dp->sibling) {
+				if (ebus_fdthree_p(dp))
+					goto found_fdthree;
 			}
 		}
-	ebus_done:
-		if (!edev)
+	found_fdthree:
+		if (!dp)
+			return 0;
+
+		op = of_find_device_by_node(dp);
+		if (!op)
 			return 0;
 
-		state_prop = of_get_property(edev->prom_node, "status", NULL);
+		state_prop = of_get_property(op->node, "status", NULL);
 		if (state_prop && !strncmp(state_prop, "disabled", 8))
 			return 0;
 
-		FLOPPY_IRQ = edev->irqs[0];
+		FLOPPY_IRQ = op->irqs[0];
 
 		/* Make sure the high density bit is set, some systems
 		 * (most notably Ultra5/Ultra10) come up with it clear.
 		 */
-		auxio_reg = (void __iomem *) edev->resource[2].start;
+		auxio_reg = (void __iomem *) op->resource[2].start;
 		writel(readl(auxio_reg)|0x2, auxio_reg);
 
-		sun_pci_ebus_dev = ebus->self;
+		sun_floppy_dev = &op->dev;
 
 		spin_lock_init(&sun_pci_fd_ebus_dma.lock);
 
 		/* XXX ioremap */
 		sun_pci_fd_ebus_dma.regs = (void __iomem *)
-			edev->resource[1].start;
+			op->resource[1].start;
 		if (!sun_pci_fd_ebus_dma.regs)
 			return 0;
 
@@ -625,7 +621,7 @@ static unsigned long __init sun_floppy_init(void)
 			return 0;
 
 		/* XXX ioremap */
-		sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start;
+		sun_fdc = (struct sun_flpy_controller *) op->resource[0].start;
 
 		sun_fdops.fd_inb = sun_pci_fd_inb;
 		sun_fdops.fd_outb = sun_pci_fd_outb;
@@ -662,12 +658,15 @@ static unsigned long __init sun_floppy_init(void)
 		/*
 		 * Find NS87303 SuperIO config registers (through ecpp).
 		 */
-		for_each_ebus(ebus) {
-			for_each_ebusdev(edev, ebus) {
-				if (!strcmp(edev->prom_node->name, "ecpp")) {
-					config = edev->resource[1].start;
-					goto config_done;
-				}
+		config = 0;
+		for (dp = ebus_dp->child; dp; dp = dp->sibling) {
+			if (!strcmp(dp->name, "ecpp")) {
+				struct of_device *ecpp_op;
+
+				ecpp_op = of_find_device_by_node(dp);
+				if (ecpp_op)
+					config = ecpp_op->resource[1].start;
+				goto config_done;
 			}
 		}
 	config_done:
@@ -716,26 +715,23 @@ static unsigned long __init sun_floppy_init(void)
 #endif /* PCI_FDC_SWAP_DRIVES */
 
 		return sun_floppy_types[0];
-#else
-		return 0;
-#endif
 	}
-	prom_getproperty(sdev->prom_node, "status", state, sizeof(state));
-	if(!strncmp(state, "disabled", 8))
+	prop = of_get_property(op->node, "status", NULL);
+	if (prop && !strncmp(state, "disabled", 8))
 		return 0;
 
 	/*
-	 * We cannot do sbus_ioremap here: it does request_region,
+	 * We cannot do of_ioremap here: it does request_region,
 	 * which the generic floppy driver tries to do once again.
 	 * But we must use the sdev resource values as they have
 	 * had parent ranges applied.
 	 */
 	sun_fdc = (struct sun_flpy_controller *)
-		(sdev->resource[0].start +
-		 ((sdev->resource[0].flags & 0x1ffUL) << 32UL));
+		(op->resource[0].start +
+		 ((op->resource[0].flags & 0x1ffUL) << 32UL));
 
 	/* Last minute sanity check... */
-	if(sbus_readb(&sun_fdc->status1_82077) == 0xff) {
+	if (sbus_readb(&sun_fdc->status1_82077) == 0xff) {
 		sun_fdc = (struct sun_flpy_controller *)-1;
 		return 0;
 	}
diff --git a/arch/sparc/include/asm/gpio.h b/arch/sparc/include/asm/gpio.h
new file mode 100644
index 0000000..a0e3ac0
--- /dev/null
+++ b/arch/sparc/include/asm/gpio.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_SPARC_GPIO_H
+#define __ASM_SPARC_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_SPARC_GPIO_H */
diff --git a/arch/sparc/include/asm/io-unit.h b/arch/sparc/include/asm/io-unit.h
index 96823b4..01ab2f6 100644
--- a/arch/sparc/include/asm/io-unit.h
+++ b/arch/sparc/include/asm/io-unit.h
@@ -55,8 +55,4 @@ struct iounit_struct {
 #define IOUNIT_BMAPM_START	IOUNIT_BMAP2_END
 #define IOUNIT_BMAPM_END	((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT)
 
-extern __u32 iounit_map_dma_init(struct sbus_bus *, int);
-#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus)
-extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *);
-
 #endif /* !(_SPARC_IO_UNIT_H) */
diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h
index 10d7da4..93fe21e 100644
--- a/arch/sparc/include/asm/io_32.h
+++ b/arch/sparc/include/asm/io_32.h
@@ -293,14 +293,6 @@ extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
 extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
 
 /*
- * Bus number may be in res->flags... somewhere.
- */
-extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset,
-    unsigned long size, char *name);
-extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
-
-
-/*
  * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
  * so rtc_port is static in it. This should not change unless a new
  * hardware pops up.
@@ -308,6 +300,17 @@ extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
 #define RTC_PORT(x)   (rtc_port + (x))
 #define RTC_ALWAYS_BCD  0
 
+static inline int sbus_can_dma_64bit(void)
+{
+	return 0; /* actually, sparc_cpu_model==sun4d */
+}
+static inline int sbus_can_burst64(void)
+{
+	return 0; /* actually, sparc_cpu_model==sun4d */
+}
+struct device;
+extern void sbus_set_sbus64(struct device *, int);
+
 #endif
 
 #define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1
diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h
index 0bff078..4aee21d 100644
--- a/arch/sparc/include/asm/io_64.h
+++ b/arch/sparc/include/asm/io_64.h
@@ -482,18 +482,16 @@ struct pci_dev;
 extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
 extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
 
-/* Similarly for SBUS. */
-#define sbus_ioremap(__res, __offset, __size, __name) \
-({	unsigned long __ret; \
-	__ret  = (__res)->start + (((__res)->flags & 0x1ffUL) << 32UL); \
-	__ret += (unsigned long) (__offset); \
-	if (! request_region((__ret), (__size), (__name))) \
-		__ret = 0UL; \
-	(void __iomem *) __ret; \
-})
-
-#define sbus_iounmap(__addr, __size)	\
-	release_region((unsigned long)(__addr), (__size))
+static inline int sbus_can_dma_64bit(void)
+{
+	return 1;
+}
+static inline int sbus_can_burst64(void)
+{
+	return 1;
+}
+struct device;
+extern void sbus_set_sbus64(struct device *, int);
 
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
diff --git a/arch/sparc/include/asm/iommu_64.h b/arch/sparc/include/asm/iommu_64.h
index d7b9afc..caf798b 100644
--- a/arch/sparc/include/asm/iommu_64.h
+++ b/arch/sparc/include/asm/iommu_64.h
@@ -48,6 +48,9 @@ struct strbuf {
 	unsigned long		strbuf_control;
 	unsigned long		strbuf_pflush;
 	unsigned long		strbuf_fsync;
+	unsigned long		strbuf_err_stat;
+	unsigned long		strbuf_tag_diag;
+	unsigned long		strbuf_line_diag;
 	unsigned long		strbuf_ctxflush;
 	unsigned long		strbuf_ctxmatch_base;
 	unsigned long		strbuf_flushflag_pa;
diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
index e3dd930..71673ec 100644
--- a/arch/sparc/include/asm/irq_64.h
+++ b/arch/sparc/include/asm/irq_64.h
@@ -56,7 +56,6 @@ extern unsigned int sun4u_build_msi(u32 portid, unsigned int *virt_irq_p,
 				    unsigned long imap_base,
 				    unsigned long iclr_base);
 extern void sun4u_destroy_msi(unsigned int virt_irq);
-extern unsigned int sbus_build_irq(void *sbus, unsigned int ino);
 
 extern unsigned char virt_irq_alloc(unsigned int dev_handle,
 				    unsigned int dev_ino);
diff --git a/arch/sparc/include/asm/mc146818rtc_64.h b/arch/sparc/include/asm/mc146818rtc_64.h
index e9c0fcc..7238d17 100644
--- a/arch/sparc/include/asm/mc146818rtc_64.h
+++ b/arch/sparc/include/asm/mc146818rtc_64.h
@@ -7,12 +7,8 @@
 #include <asm/io.h>
 
 #ifndef RTC_PORT
-#ifdef CONFIG_PCI
-extern unsigned long ds1287_regs;
-#else
-#define ds1287_regs (0UL)
-#endif
-#define RTC_PORT(x)	(ds1287_regs + (x))
+extern unsigned long cmos_regs;
+#define RTC_PORT(x)	(cmos_regs + (x))
 #define RTC_ALWAYS_BCD	0
 #endif
 
@@ -29,6 +25,4 @@ outb_p((addr),RTC_PORT(0)); \
 outb_p((val),RTC_PORT(1)); \
 })
 
-#define RTC_IRQ 8
-
 #endif /* __ASM_SPARC64_MC146818RTC_H */
diff --git a/arch/sparc/include/asm/memctrl.h b/arch/sparc/include/asm/memctrl.h
new file mode 100644
index 0000000..4065c56
--- /dev/null
+++ b/arch/sparc/include/asm/memctrl.h
@@ -0,0 +1,9 @@
+#ifndef _SPARC_MEMCTRL_H
+#define _SPARC_MEMCTRL_H
+
+typedef int (*dimm_printer_t)(int synd_code, unsigned long paddr, char *buf, int buflen);
+
+int register_dimm_printer(dimm_printer_t func);
+void unregister_dimm_printer(dimm_printer_t func);
+
+#endif /* _SPARC_MEMCTRL_H */
diff --git a/arch/sparc/include/asm/mostek.h b/arch/sparc/include/asm/mostek.h
deleted file mode 100644
index 433be3e..0000000
--- a/arch/sparc/include/asm/mostek.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MOSTEK_H
-#define ___ASM_SPARC_MOSTEK_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/mostek_64.h>
-#else
-#include <asm/mostek_32.h>
-#endif
-#endif
diff --git a/arch/sparc/include/asm/mostek_32.h b/arch/sparc/include/asm/mostek_32.h
deleted file mode 100644
index a99590c..0000000
--- a/arch/sparc/include/asm/mostek_32.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * mostek.h:  Describes the various Mostek time of day clock registers.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca)
- */
-
-#ifndef _SPARC_MOSTEK_H
-#define _SPARC_MOSTEK_H
-
-#include <asm/idprom.h>
-#include <asm/io.h>
-
-/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
- *
- *                             Data
- * Address                                                 Function
- *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
- *   7ff  -     -     -     -    -     -     -     -       Year 00-99
- *   7fe  0     0     0     -    -     -     -     -      Month 01-12
- *   7fd  0     0     -     -    -     -     -     -       Date 01-31
- *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
- *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
- *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
- *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
- *   7f8  W     R     S     -    -     -     -     -    Control
- *
- *   * ST is STOP BIT
- *   * W is WRITE BIT
- *   * R is READ BIT
- *   * S is SIGN BIT
- *   * FT is FREQ TEST BIT
- *   * KS is KICK START BIT
- */
-
-/* The Mostek 48t02 real time clock and NVRAM chip. The registers
- * other than the control register are in binary coded decimal. Some
- * control bits also live outside the control register.
- */
-#define mostek_read(_addr)		readb(_addr)
-#define mostek_write(_addr,_val)	writeb(_val, _addr)
-#define MOSTEK_EEPROM		0x0000UL
-#define MOSTEK_IDPROM		0x07d8UL
-#define MOSTEK_CREG		0x07f8UL
-#define MOSTEK_SEC		0x07f9UL
-#define MOSTEK_MIN		0x07faUL
-#define MOSTEK_HOUR		0x07fbUL
-#define MOSTEK_DOW		0x07fcUL
-#define MOSTEK_DOM		0x07fdUL
-#define MOSTEK_MONTH		0x07feUL
-#define MOSTEK_YEAR		0x07ffUL
-
-struct mostek48t02 {
-	volatile char eeprom[2008];	/* This is the eeprom, don't touch! */
-	struct idprom idprom;		/* The idprom lives here. */
-	volatile unsigned char creg;	/* Control register */
-	volatile unsigned char sec;	/* Seconds (0-59) */
-	volatile unsigned char min;	/* Minutes (0-59) */
-	volatile unsigned char hour;	/* Hour (0-23) */
-	volatile unsigned char dow;	/* Day of the week (1-7) */
-	volatile unsigned char dom;	/* Day of the month (1-31) */
-	volatile unsigned char month;	/* Month of year (1-12) */
-	volatile unsigned char year;	/* Year (0-99) */
-};
-
-extern spinlock_t mostek_lock;
-extern void __iomem *mstk48t02_regs;
-
-/* Control register values. */
-#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
-#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
-#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
-
-/* Control bits that live in the other registers. */
-#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
-#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
-#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
-
-#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
-#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
-
-/* Masks that define how much space each value takes up. */
-#define	MSTK_SEC_MASK	0x7f
-#define	MSTK_MIN_MASK	0x7f
-#define	MSTK_HOUR_MASK	0x3f
-#define	MSTK_DOW_MASK	0x07
-#define	MSTK_DOM_MASK	0x3f
-#define	MSTK_MONTH_MASK	0x1f
-#define	MSTK_YEAR_MASK	0xffU
-
-/* Binary coded decimal conversion macros. */
-#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
-#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
-
-/* Generic register set and get macros for internal use. */
-#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK))
-#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0)
-
-/* Macros to make register access easier on our fingers. These give you
- * the decimal value of the register requested if applicable. You pass
- * the a pointer to a 'struct mostek48t02'.
- */
-#define	MSTK_REG_CREG(regs)	(((struct mostek48t02 *)regs)->creg)
-#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,sec,SEC)
-#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,min,MIN)
-#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,hour,HOUR)
-#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,dow,DOW)
-#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,dom,DOM)
-#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,month,MONTH)
-#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,year,YEAR)
-
-#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,sec,value,SEC)
-#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,min,value,MIN)
-#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,hour,value,HOUR)
-#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,dow,value,DOW)
-#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,dom,value,DOM)
-#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,month,value,MONTH)
-#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,year,value,YEAR)
-
-
-/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
- * same (basically) layout of the 48t02 chip except for the extra
- * NVRAM on board (8 KB against the 48t02's 2 KB).
- */
-struct mostek48t08 {
-	char offset[6*1024];         /* Magic things may be here, who knows? */
-	struct mostek48t02 regs;     /* Here is what we are interested in.   */
-};
-
-#ifdef CONFIG_SUN4
-enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
-INTERSIL, MSTK_INVALID };
-#else
-enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
-MSTK_INVALID };
-#endif
-
-#ifdef CONFIG_SUN4
-/* intersil on a sun 4/260 code  data from harris doc */
-struct intersil_dt {
-        volatile unsigned char int_csec;
-        volatile unsigned char int_hour;
-        volatile unsigned char int_min;
-        volatile unsigned char int_sec;
-        volatile unsigned char int_month;
-        volatile unsigned char int_day;
-        volatile unsigned char int_year;
-        volatile unsigned char int_dow;
-};
-
-struct intersil {
-	struct intersil_dt clk;
-	struct intersil_dt cmp;
-	volatile unsigned char int_intr_reg;
-	volatile unsigned char int_cmd_reg;
-};
-
-#define INTERSIL_STOP        0x0
-#define INTERSIL_START       0x8
-#define INTERSIL_INTR_DISABLE   0x0
-#define INTERSIL_INTR_ENABLE   0x10
-#define INTERSIL_32K		0x0
-#define INTERSIL_NORMAL		0x0
-#define INTERSIL_24H		0x4
-#define INTERSIL_INT_100HZ	0x2
-
-/* end of intersil info */
-#endif
-
-#endif /* !(_SPARC_MOSTEK_H) */
diff --git a/arch/sparc/include/asm/mostek_64.h b/arch/sparc/include/asm/mostek_64.h
deleted file mode 100644
index c5652de..0000000
--- a/arch/sparc/include/asm/mostek_64.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* mostek.h:  Describes the various Mostek time of day clock registers.
- *
- * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- */
-
-#ifndef _SPARC64_MOSTEK_H
-#define _SPARC64_MOSTEK_H
-
-#include <asm/idprom.h>
-
-/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
- *
- *                             Data
- * Address                                                 Function
- *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
- *   7ff  -     -     -     -    -     -     -     -       Year 00-99
- *   7fe  0     0     0     -    -     -     -     -      Month 01-12
- *   7fd  0     0     -     -    -     -     -     -       Date 01-31
- *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
- *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
- *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
- *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
- *   7f8  W     R     S     -    -     -     -     -    Control
- *
- *   * ST is STOP BIT
- *   * W is WRITE BIT
- *   * R is READ BIT
- *   * S is SIGN BIT
- *   * FT is FREQ TEST BIT
- *   * KS is KICK START BIT
- */
-
-/* The Mostek 48t02 real time clock and NVRAM chip. The registers
- * other than the control register are in binary coded decimal. Some
- * control bits also live outside the control register.
- *
- * We now deal with physical addresses for I/O to the chip. -DaveM
- */
-static inline u8 mostek_read(void __iomem *addr)
-{
-	u8 ret;
-
-	__asm__ __volatile__("lduba	[%1] %2, %0"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-	return ret;
-}
-
-static inline void mostek_write(void __iomem *addr, u8 val)
-{
-	__asm__ __volatile__("stba	%0, [%1] %2"
-			     : /* no outputs */
-			     : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-#define MOSTEK_EEPROM		0x0000UL
-#define MOSTEK_IDPROM		0x07d8UL
-#define MOSTEK_CREG		0x07f8UL
-#define MOSTEK_SEC		0x07f9UL
-#define MOSTEK_MIN		0x07faUL
-#define MOSTEK_HOUR		0x07fbUL
-#define MOSTEK_DOW		0x07fcUL
-#define MOSTEK_DOM		0x07fdUL
-#define MOSTEK_MONTH		0x07feUL
-#define MOSTEK_YEAR		0x07ffUL
-
-extern spinlock_t mostek_lock;
-extern void __iomem *mstk48t02_regs;
-
-/* Control register values. */
-#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
-#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
-#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
-
-/* Control bits that live in the other registers. */
-#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
-#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
-#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
-
-#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
-#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
-
-/* Masks that define how much space each value takes up. */
-#define	MSTK_SEC_MASK	0x7f
-#define	MSTK_MIN_MASK	0x7f
-#define	MSTK_HOUR_MASK	0x3f
-#define	MSTK_DOW_MASK	0x07
-#define	MSTK_DOM_MASK	0x3f
-#define	MSTK_MONTH_MASK	0x1f
-#define	MSTK_YEAR_MASK	0xffU
-
-/* Binary coded decimal conversion macros. */
-#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
-#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
-
-/* Generic register set and get macros for internal use. */
-#define MSTK_GET(regs,name)	\
-	(MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK))
-#define MSTK_SET(regs,name,value) \
-do {	u8 __val = mostek_read(regs + MOSTEK_ ## name); \
-	__val &= ~(MSTK_ ## name ## _MASK); \
-	__val |= (MSTK_DECIMAL_TO_REGVAL(value) & \
-		  (MSTK_ ## name ## _MASK)); \
-	mostek_write(regs + MOSTEK_ ## name, __val); \
-} while(0)
-
-/* Macros to make register access easier on our fingers. These give you
- * the decimal value of the register requested if applicable. You pass
- * the a pointer to a 'struct mostek48t02'.
- */
-#define	MSTK_REG_CREG(regs)	(mostek_read((regs) + MOSTEK_CREG))
-#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,SEC)
-#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,MIN)
-#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,HOUR)
-#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,DOW)
-#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,DOM)
-#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,MONTH)
-#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,YEAR)
-
-#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,SEC,value)
-#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,MIN,value)
-#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,HOUR,value)
-#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,DOW,value)
-#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,DOM,value)
-#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,MONTH,value)
-#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,YEAR,value)
-
-
-/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
- * same (basically) layout of the 48t02 chip except for the extra
- * NVRAM on board (8 KB against the 48t02's 2 KB).
- */
-#define MOSTEK_48T08_OFFSET	0x0000UL	/* Lower NVRAM portions */
-#define MOSTEK_48T08_48T02	0x1800UL	/* Offset to 48T02 chip */
-
-/* SUN5 systems usually have 48t59 model clock chipsets.  But we keep the older
- * clock chip definitions around just in case.
- */
-#define MOSTEK_48T59_OFFSET	0x0000UL	/* Lower NVRAM portions */
-#define MOSTEK_48T59_48T02	0x1800UL	/* Offset to 48T02 chip */
-
-#endif /* !(_SPARC64_MOSTEK_H) */
diff --git a/arch/sparc/include/asm/obio.h b/arch/sparc/include/asm/obio.h
index 1a7544c..4ade0c8 100644
--- a/arch/sparc/include/asm/obio.h
+++ b/arch/sparc/include/asm/obio.h
@@ -155,17 +155,6 @@ static inline void bw_set_ctrl(int cpu, unsigned ctrl)
 			      "i" (ASI_M_CTL));
 }
 
-extern unsigned char cpu_leds[32];
-
-static inline void show_leds(int cpuid)
-{
-	cpuid &= 0x1e;
-	__asm__ __volatile__ ("stba %0, [%1] %2" : :
-			      "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
-			      "r" (ECSR_BASE(cpuid) | BB_LEDS),
-			      "i" (ASI_M_CTL));
-}
-
 static inline unsigned cc_get_ipen(void)
 {
 	unsigned pending;
diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h
index bba777a..a5d9811 100644
--- a/arch/sparc/include/asm/of_device.h
+++ b/arch/sparc/include/asm/of_device.h
@@ -30,6 +30,8 @@ struct of_device
 extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
 extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
 
+extern void of_propagate_archdata(struct of_device *bus);
+
 /* This is just here during the transition */
 #include <linux/of_platform.h>
 
diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h
index 2348ab9..90da990 100644
--- a/arch/sparc/include/asm/of_platform.h
+++ b/arch/sparc/include/asm/of_platform.h
@@ -13,9 +13,6 @@
  *
  */
 
-extern struct bus_type ebus_bus_type;
-extern struct bus_type sbus_bus_type;
-
 #define of_bus_type	of_platform_bus_type	/* for compatibility */
 
 #endif
diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
index b2631da..699da05 100644
--- a/arch/sparc/include/asm/oplib_32.h
+++ b/arch/sparc/include/asm/oplib_32.h
@@ -21,7 +21,6 @@ enum prom_major_version {
 	PROM_V2,      /* sun4c and early sun4m V2 prom */
 	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
 	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
-	PROM_SUN4,    /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */
 };
 
 extern enum prom_major_version prom_vers;
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
index cf5fb70..d1806ed 100644
--- a/arch/sparc/include/asm/page_32.h
+++ b/arch/sparc/include/asm/page_32.h
@@ -8,11 +8,8 @@
 #ifndef _SPARC_PAGE_H
 #define _SPARC_PAGE_H
 
-#ifdef CONFIG_SUN4
-#define PAGE_SHIFT   13
-#else
 #define PAGE_SHIFT   12
-#endif
+
 #ifndef __ASSEMBLY__
 /* I have my suspicions... -DaveM */
 #define PAGE_SIZE    (1UL << PAGE_SHIFT)
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
index b579b91..4274ed1 100644
--- a/arch/sparc/include/asm/page_64.h
+++ b/arch/sparc/include/asm/page_64.h
@@ -38,6 +38,8 @@
 
 #ifndef __ASSEMBLY__
 
+#define WANT_PAGE_VIRTUAL
+
 extern void _clear_page(void *page);
 #define clear_page(X)	_clear_page((void *)(X))
 struct page;
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
index d983062..dff3f02 100644
--- a/arch/sparc/include/asm/parport.h
+++ b/arch/sparc/include/asm/parport.h
@@ -8,7 +8,7 @@
 
 #include <linux/of_device.h>
 
-#include <asm/ebus.h>
+#include <asm/ebus_dma.h>
 #include <asm/ns87303.h>
 #include <asm/prom.h>
 
@@ -215,7 +215,7 @@ static int __devexit ecpp_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id ecpp_match[] = {
+static const struct of_device_id ecpp_match[] = {
 	{
 		.name = "ecpp",
 	},
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
index 0ee949d..b41c4c1 100644
--- a/arch/sparc/include/asm/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -3,6 +3,8 @@
 
 #ifdef __KERNEL__
 
+#include <linux/dma-mapping.h>
+
 /* Can be used to override the logic in pci_scan_bus for skipping
  * already-configured bus numbers - to be used for buggy BIOSes
  * or architectures with incomplete PCI setup by the loader.
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index 08237fd..e0cabe7 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -14,11 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/swap.h>
 #include <asm/types.h>
-#ifdef CONFIG_SUN4
-#include <asm/pgtsun4.h>
-#else
 #include <asm/pgtsun4c.h>
-#endif
 #include <asm/pgtsrmmu.h>
 #include <asm/vac-ops.h>
 #include <asm/oplib.h>
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index bb9ec2c..b049abf 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -770,6 +770,8 @@ extern void sun4v_patch_tlb_handlers(void);
 
 extern unsigned long cmdline_memory_size;
 
+extern asmlinkage void do_sparc64_fault(struct pt_regs *regs);
+
 #endif /* !(__ASSEMBLY__) */
 
 #endif /* !(_SPARC64_PGTABLE_H) */
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index fd55522..900d447 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -18,6 +18,7 @@
  */
 #include <linux/types.h>
 #include <linux/proc_fs.h>
+#include <linux/mutex.h>
 #include <asm/atomic.h>
 
 #define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	2
@@ -73,6 +74,7 @@ struct of_irq_controller {
 
 extern struct device_node *of_find_node_by_cpuid(int cpuid);
 extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
+extern struct mutex of_set_property_mutex;
 extern int of_getintprop_default(struct device_node *np,
 				 const char *name,
 				 int def);
@@ -94,6 +96,16 @@ static inline void of_node_put(struct device_node *node)
 {
 }
 
+/* These routines are here to provide compatibility with how powerpc
+ * handles IRQ mapping for OF device nodes.  We precompute and permanently
+ * register them in the of_device objects, whereas powerpc computes them
+ * on request.
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
+static inline void irq_dispose_mapping(unsigned int virq)
+{
+}
+
 /*
  * NB:  This is here while we transition from using asm/prom.h
  * to linux/of.h
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
index 06e4914..3d3e9c1 100644
--- a/arch/sparc/include/asm/ptrace_64.h
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -113,6 +113,8 @@ struct sparc_trapf {
 
 #ifdef __KERNEL__
 
+#include <linux/threads.h>
+
 static inline int pt_regs_trap_type(struct pt_regs *regs)
 {
 	return regs->magic & 0x1ff;
@@ -138,6 +140,7 @@ struct global_reg_snapshot {
 	struct thread_info	*thread;
 	unsigned long		pad1;
 };
+extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
 
 #define __ARCH_WANT_COMPAT_SYS_PTRACE
 
diff --git a/arch/sparc/include/asm/reboot.h b/arch/sparc/include/asm/reboot.h
deleted file mode 100644
index 3f3f43f..0000000
--- a/arch/sparc/include/asm/reboot.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SPARC64_REBOOT_H
-#define _SPARC64_REBOOT_H
-
-extern void machine_alt_power_off(void);
-
-#endif /* _SPARC64_REBOOT_H */
diff --git a/arch/sparc/include/asm/rtc.h b/arch/sparc/include/asm/rtc.h
deleted file mode 100644
index f9ecb1f..0000000
--- a/arch/sparc/include/asm/rtc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * rtc.h: Definitions for access to the Mostek real time clock
- *
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- */
-
-#ifndef _RTC_H
-#define _RTC_H
-
-#include <linux/ioctl.h>
-
-struct rtc_time
-{
-	int	sec;	/* Seconds (0-59) */
-	int	min;	/* Minutes (0-59) */
-	int	hour;	/* Hour (0-23) */
-	int	dow;	/* Day of the week (1-7) */
-	int	dom;	/* Day of the month (1-31) */
-	int	month;	/* Month of year (1-12) */
-	int	year;	/* Year (0-99) */
-};
-
-#define RTCGET _IOR('p', 20, struct rtc_time)
-#define RTCSET _IOW('p', 21, struct rtc_time)
-
-#endif
diff --git a/arch/sparc/include/asm/sbus.h b/arch/sparc/include/asm/sbus.h
deleted file mode 100644
index f82481a..0000000
--- a/arch/sparc/include/asm/sbus.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SBUS_H
-#define ___ASM_SPARC_SBUS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/sbus_64.h>
-#else
-#include <asm/sbus_32.h>
-#endif
-#endif
diff --git a/arch/sparc/include/asm/sbus_32.h b/arch/sparc/include/asm/sbus_32.h
deleted file mode 100644
index a7b4fa2..0000000
--- a/arch/sparc/include/asm/sbus_32.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * sbus.h:  Defines for the Sun SBus.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_SBUS_H
-#define _SPARC_SBUS_H
-
-#include <linux/dma-mapping.h>
-#include <linux/ioport.h>
-#include <linux/of_device.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/scatterlist.h>
-
-/* We scan which devices are on the SBus using the PROM node device
- * tree.  SBus devices are described in two different ways.  You can
- * either get an absolute address at which to access the device, or
- * you can get a SBus 'slot' number and an offset within that slot.
- */
-
-/* The base address at which to calculate device OBIO addresses. */
-#define SUN_SBUS_BVADDR        0xf8000000
-#define SBUS_OFF_MASK          0x01ffffff
-
-/* These routines are used to calculate device address from slot
- * numbers + offsets, and vice versa.
- */
-
-static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
-{
-  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
-}
-
-static inline int sbus_dev_slot(unsigned long dev_addr)
-{
-  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
-}
-
-struct sbus_bus;
-
-/* Linux SBUS device tables */
-struct sbus_dev {
-	struct of_device	ofdev;
-	struct sbus_bus		*bus;
-	struct sbus_dev		*next;
-	struct sbus_dev		*child;
-	struct sbus_dev		*parent;
-	int prom_node;
-	char prom_name[64];
-	int slot;
-
-	struct resource resource[PROMREG_MAX];
-
-	struct linux_prom_registers reg_addrs[PROMREG_MAX];
-	int num_registers;
-
-	struct linux_prom_ranges device_ranges[PROMREG_MAX];
-	int num_device_ranges;
-
-	unsigned int irqs[4];
-	int num_irqs;
-};
-#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
-
-/* This struct describes the SBus(s) found on this machine. */
-struct sbus_bus {
-	struct of_device	ofdev;
-	struct sbus_dev		*devices;	/* Link to devices on this SBus */
-	struct sbus_bus		*next;		/* next SBus, if more than one SBus */
-	int			prom_node;	/* PROM device tree node for this SBus */
-	char			prom_name[64];  /* Usually "sbus" or "sbi" */
-	int			clock_freq;
-
-	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
-	int num_sbus_ranges;
-
-	int devid;
-	int board;
-};
-#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
-
-extern struct sbus_bus *sbus_root;
-
-static inline int
-sbus_is_slave(struct sbus_dev *dev)
-{
-	/* XXX Have to write this for sun4c's */
-	return 0;
-}
-
-/* Device probing routines could find these handy */
-#define for_each_sbus(bus) \
-        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
-
-#define for_each_sbusdev(device, bus) \
-        for((device) = (bus)->devices; (device); (device)=(device)->next)
-
-#define for_all_sbusdev(device, bus) \
-	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
-		for ((device) = (bus)->devices; (device); (device) = (device)->next)
-
-/* Driver DVMA interfaces. */
-#define sbus_can_dma_64bit(sdev)	(0) /* actually, sparc_cpu_model==sun4d */
-#define sbus_can_burst64(sdev)		(0) /* actually, sparc_cpu_model==sun4d */
-extern void sbus_set_sbus64(struct sbus_dev *, int);
-extern void sbus_fill_device_irq(struct sbus_dev *);
-
-/* These yield IOMMU mappings in consistent mode. */
-extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
-extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
-void prom_adjust_ranges(struct linux_prom_ranges *, int,
-			struct linux_prom_ranges *, int);
-
-#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
-#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
-#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
-#define	SBUS_DMA_NONE		DMA_NONE
-
-/* All the rest use streaming mode mappings. */
-extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
-extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
-extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
-extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
-
-/* Finally, allow explicit synchronization of streamable mappings. */
-extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
-#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
-extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
-extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
-#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
-extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
-
-/* Eric Brower (ebrower@usa.net)
- * Translate SBus interrupt levels to ino values--
- * this is used when converting sbus "interrupts" OBP
- * node values to "intr" node values, and is platform
- * dependent.  If only we could call OBP with
- * "sbus-intr>cpu (sbint -- ino)" from kernel...
- * See .../drivers/sbus/sbus.c for details.
- */
-BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
-#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
-
-extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
-extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
-extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
-extern int sbus_arch_preinit(void);
-extern void sbus_arch_postinit(void);
-
-#endif /* !(_SPARC_SBUS_H) */
diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h
deleted file mode 100644
index b606c14..0000000
--- a/arch/sparc/include/asm/sbus_64.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/* sbus.h: Defines for the Sun SBus.
- *
- * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _SPARC64_SBUS_H
-#define _SPARC64_SBUS_H
-
-#include <linux/dma-mapping.h>
-#include <linux/ioport.h>
-#include <linux/of_device.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/iommu.h>
-#include <asm/scatterlist.h>
-
-/* We scan which devices are on the SBus using the PROM node device
- * tree.  SBus devices are described in two different ways.  You can
- * either get an absolute address at which to access the device, or
- * you can get a SBus 'slot' number and an offset within that slot.
- */
-
-/* The base address at which to calculate device OBIO addresses. */
-#define SUN_SBUS_BVADDR        0x00000000
-#define SBUS_OFF_MASK          0x0fffffff
-
-/* These routines are used to calculate device address from slot
- * numbers + offsets, and vice versa.
- */
-
-static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
-{
-  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset));
-}
-
-static inline int sbus_dev_slot(unsigned long dev_addr)
-{
-  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28);
-}
-
-struct sbus_bus;
-
-/* Linux SBUS device tables */
-struct sbus_dev {
-	struct of_device	ofdev;
-	struct sbus_bus		*bus;
-	struct sbus_dev		*next;
-	struct sbus_dev		*child;
-	struct sbus_dev		*parent;
-	int prom_node;
-	char prom_name[64];
-	int slot;
-
-	struct resource resource[PROMREG_MAX];
-
-	struct linux_prom_registers reg_addrs[PROMREG_MAX];
-	int num_registers;
-
-	struct linux_prom_ranges device_ranges[PROMREG_MAX];
-	int num_device_ranges;
-
-	unsigned int irqs[4];
-	int num_irqs;
-};
-#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
-
-/* This struct describes the SBus(s) found on this machine. */
-struct sbus_bus {
-	struct of_device	ofdev;
-	struct sbus_dev		*devices;	/* Tree of SBUS devices	*/
-	struct sbus_bus		*next;		/* Next SBUS in system	*/
-	int			prom_node;      /* OBP node of SBUS	*/
-	char			prom_name[64];	/* Usually "sbus" or "sbi" */
-	int			clock_freq;
-
-	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
-	int num_sbus_ranges;
-
-	int portid;
-};
-#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
-
-extern struct sbus_bus *sbus_root;
-
-/* Device probing routines could find these handy */
-#define for_each_sbus(bus) \
-        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
-
-#define for_each_sbusdev(device, bus) \
-        for((device) = (bus)->devices; (device); (device)=(device)->next)
-
-#define for_all_sbusdev(device, bus) \
-	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
-		for ((device) = (bus)->devices; (device); (device) = (device)->next)
-
-/* Driver DVMA interfaces. */
-#define sbus_can_dma_64bit(sdev)	(1)
-#define sbus_can_burst64(sdev)		(1)
-extern void sbus_set_sbus64(struct sbus_dev *, int);
-extern void sbus_fill_device_irq(struct sbus_dev *);
-
-static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size,
-					  dma_addr_t *dma_handle)
-{
-	return dma_alloc_coherent(&sdev->ofdev.dev, size,
-				  dma_handle, GFP_ATOMIC);
-}
-
-static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size,
-					void *vaddr, dma_addr_t dma_handle)
-{
-	return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle);
-}
-
-#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
-#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
-#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
-#define	SBUS_DMA_NONE		DMA_NONE
-
-/* All the rest use streaming mode mappings. */
-static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr,
-					 size_t size, int direction)
-{
-	return dma_map_single(&sdev->ofdev.dev, ptr, size,
-			      (enum dma_data_direction) direction);
-}
-
-static inline void sbus_unmap_single(struct sbus_dev *sdev,
-				     dma_addr_t dma_addr, size_t size,
-				     int direction)
-{
-	dma_unmap_single(&sdev->ofdev.dev, dma_addr, size,
-			 (enum dma_data_direction) direction);
-}
-
-static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg,
-			      int nents, int direction)
-{
-	return dma_map_sg(&sdev->ofdev.dev, sg, nents,
-			  (enum dma_data_direction) direction);
-}
-
-static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg,
-				 int nents, int direction)
-{
-	dma_unmap_sg(&sdev->ofdev.dev, sg, nents,
-		     (enum dma_data_direction) direction);
-}
-
-/* Finally, allow explicit synchronization of streamable mappings. */
-static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev,
-						dma_addr_t dma_handle,
-						size_t size, int direction)
-{
-	dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size,
-				(enum dma_data_direction) direction);
-}
-#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
-
-static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev,
-						   dma_addr_t dma_handle,
-						   size_t size, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev,
-					    struct scatterlist *sg,
-					    int nents, int direction)
-{
-	dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents,
-			    (enum dma_data_direction) direction);
-}
-#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
-
-static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev,
-					       struct scatterlist *sg,
-					       int nents, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
-extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
-extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
-extern int sbus_arch_preinit(void);
-extern void sbus_arch_postinit(void);
-
-#endif /* !(_SPARC64_SBUS_H) */
diff --git a/arch/sparc/include/asm/serial.h b/arch/sparc/include/asm/serial.h
new file mode 100644
index 0000000..f90d61c
--- /dev/null
+++ b/arch/sparc/include/asm/serial.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_SERIAL_H
+#define __SPARC_SERIAL_H
+
+#define BASE_BAUD ( 1843200 / 16 )
+
+#endif /* __SPARC_SERIAL_H */
diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h
index de2249b..bf2d532 100644
--- a/arch/sparc/include/asm/spinlock_32.h
+++ b/arch/sparc/include/asm/spinlock_32.h
@@ -6,8 +6,6 @@
 #ifndef __SPARC_SPINLOCK_H
 #define __SPARC_SPINLOCK_H
 
-#include <linux/threads.h>	/* For NR_CPUS */
-
 #ifndef __ASSEMBLY__
 
 #include <asm/psr.h>
diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h
index 0006fe9..120cfe4 100644
--- a/arch/sparc/include/asm/spinlock_64.h
+++ b/arch/sparc/include/asm/spinlock_64.h
@@ -6,8 +6,6 @@
 #ifndef __SPARC64_SPINLOCK_H
 #define __SPARC64_SPINLOCK_H
 
-#include <linux/threads.h>	/* For NR_CPUS */
-
 #ifndef __ASSEMBLY__
 
 /* To get debugging spinlocks which detect and catch
diff --git a/arch/sparc/include/asm/sstate.h b/arch/sparc/include/asm/sstate.h
deleted file mode 100644
index a7c35db..0000000
--- a/arch/sparc/include/asm/sstate.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _SPARC64_SSTATE_H
-#define _SPARC64_SSTATE_H
-
-extern void sstate_booting(void);
-extern void sstate_running(void);
-extern void sstate_halt(void);
-extern void sstate_poweroff(void);
-extern void sstate_panic(void);
-extern void sstate_reboot(void);
-
-extern void sun4v_sstate_init(void);
-
-#endif /* _SPARC64_SSTATE_H */
diff --git a/arch/sparc/include/asm/starfire.h b/arch/sparc/include/asm/starfire.h
index 07bafd3..d56ce60a 100644
--- a/arch/sparc/include/asm/starfire.h
+++ b/arch/sparc/include/asm/starfire.h
@@ -12,7 +12,6 @@
 extern int this_is_starfire;
 
 extern void check_if_starfire(void);
-extern void starfire_cpu_setup(void);
 extern int starfire_hard_smp_processor_id(void);
 extern void starfire_hookup(int);
 extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid);
diff --git a/arch/sparc/include/asm/statfs.h b/arch/sparc/include/asm/statfs.h
index 5e937a7..55e607a 100644
--- a/arch/sparc/include/asm/statfs.h
+++ b/arch/sparc/include/asm/statfs.h
@@ -1,8 +1,6 @@
 #ifndef ___ASM_SPARC_STATFS_H
 #define ___ASM_SPARC_STATFS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/statfs_64.h>
-#else
-#include <asm/statfs_32.h>
-#endif
+
+#include <asm-generic/statfs.h>
+
 #endif
diff --git a/arch/sparc/include/asm/statfs_32.h b/arch/sparc/include/asm/statfs_32.h
deleted file mode 100644
index 304520f..0000000
--- a/arch/sparc/include/asm/statfs_32.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SPARC_STATFS_H
-#define _SPARC_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif
diff --git a/arch/sparc/include/asm/statfs_64.h b/arch/sparc/include/asm/statfs_64.h
deleted file mode 100644
index 79b3c89..0000000
--- a/arch/sparc/include/asm/statfs_64.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef _SPARC64_STATFS_H
-#define _SPARC64_STATFS_H
-
-#ifndef __KERNEL_STRICT_NAMES
-
-#include <linux/types.h>
-
-typedef __kernel_fsid_t	fsid_t;
-
-#endif
-
-struct statfs {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
-
-struct statfs64 {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
-
-struct compat_statfs64 {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u64 f_blocks;
-	__u64 f_bfree;
-	__u64 f_bavail;
-	__u64 f_files;
-	__u64 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-};
-
-#endif
diff --git a/arch/sparc/include/asm/sun4paddr.h b/arch/sparc/include/asm/sun4paddr.h
deleted file mode 100644
index d52985f..0000000
--- a/arch/sparc/include/asm/sun4paddr.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * sun4paddr.h:  Various physical addresses on sun4 machines
- *
- * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
- * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca)
- * 
- * Now supports more sun4's
- */
-
-#ifndef _SPARC_SUN4PADDR_H
-#define _SPARC_SUN4PADDR_H
-
-#define SUN4_IE_PHYSADDR		0xf5000000
-#define SUN4_UNUSED_PHYSADDR		0
-
-/* these work for me */
-#define SUN4_200_MEMREG_PHYSADDR	0xf4000000
-#define SUN4_200_CLOCK_PHYSADDR		0xf3000000
-#define SUN4_200_BWTWO_PHYSADDR		0xfd000000
-#define SUN4_200_ETH_PHYSADDR		0xf6000000
-#define SUN4_200_SI_PHYSADDR		0xff200000
-
-/* these were here before */
-#define SUN4_300_MEMREG_PHYSADDR	0xf4000000
-#define SUN4_300_CLOCK_PHYSADDR		0xf2000000
-#define SUN4_300_TIMER_PHYSADDR		0xef000000
-#define SUN4_300_ETH_PHYSADDR		0xf9000000
-#define SUN4_300_BWTWO_PHYSADDR		0xfb400000
-#define SUN4_300_DMA_PHYSADDR		0xfa001000
-#define SUN4_300_ESP_PHYSADDR		0xfa000000
-
-/* Are these right? */
-#define SUN4_400_MEMREG_PHYSADDR	0xf4000000
-#define SUN4_400_CLOCK_PHYSADDR		0xf2000000
-#define SUN4_400_TIMER_PHYSADDR		0xef000000
-#define SUN4_400_ETH_PHYSADDR		0xf9000000
-#define SUN4_400_BWTWO_PHYSADDR		0xfb400000
-#define SUN4_400_DMA_PHYSADDR		0xfa001000
-#define SUN4_400_ESP_PHYSADDR		0xfa000000
-
-/* 
-	these are the actual values set and used in the code. Unused items set 
-	to SUN_UNUSED_PHYSADDR 
- */
-
-extern int sun4_memreg_physaddr; /* memory register (ecc?) */
-extern int sun4_clock_physaddr;  /* system clock */
-extern int sun4_timer_physaddr;  /* timer, where applicable */
-extern int sun4_eth_physaddr;    /* onboard ethernet (ie/le) */
-extern int sun4_si_physaddr;     /* sun3 scsi adapter */
-extern int sun4_bwtwo_physaddr;  /* onboard bw2 */
-extern int sun4_dma_physaddr;    /* scsi dma */
-extern int sun4_esp_physaddr;    /* esp scsi */
-extern int sun4_ie_physaddr;     /* interrupt enable */
-
-#endif /* !(_SPARC_SUN4PADDR_H) */
diff --git a/arch/sparc/include/asm/sun4prom.h b/arch/sparc/include/asm/sun4prom.h
deleted file mode 100644
index 9c8b4cb..0000000
--- a/arch/sparc/include/asm/sun4prom.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * sun4prom.h -- interface to sun4 PROM monitor.  We don't use most of this,
- *               so most of these are just placeholders.
- */
-
-#ifndef _SUN4PROM_H_
-#define _SUN4PROM_H_
-
-/*
- * Although this looks similar to an romvec for a OpenProm machine, it is 
- * actually closer to what was used in the Sun2 and Sun3.
- *
- * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later.
- * 
- * Many of the function prototypes are guesses.  Some are certainly wrong.
- * Use with care.
- */
-
-typedef struct {
-	char		*initSP;		/* Initial system stack ptr */
-	void		(*startmon)(void);	/* Initial PC for hardware */
-	int		*diagberr;		/* Bus err handler for diags */
-	struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */
- 	unsigned int	*memorysize;		/* Usable memory in bytes */
-	unsigned char	(*getchar)(void);	/* Get char from input device */ 
-	void		(*putchar)(char);	/* Put char to output device */
-	int		(*mayget)(void);	/* Maybe get char, or -1 */
-	int		(*mayput)(int);		/* Maybe put char, or -1 */
-	unsigned char	*echo;			/* Should getchar echo? */
-	unsigned char	*insource;		/* Input source selector */
-	unsigned char	*outsink;		/* Output sink selector */
-	int		(*getkey)(void);	/* Get next key if one exists */
-	void		(*initgetkey)(void);	/* Initialize get key */
-	unsigned int	*translation;		/* Kbd translation selector */
-	unsigned char	*keybid;		/* Keyboard ID byte */
-	int		*screen_x;		/* V2: Screen x pos (r/o) */
-	int		*screen_y;		/* V2: Screen y pos (r/o) */
-	struct keybuf	*keybuf;		/* Up/down keycode buffer */
-	char		*monid;			/* Monitor version ID */
-	void		(*fbwritechar)(char);	/* Write a character to FB */
-	int		*fbAddr;		/* Address of frame buffer */
-	char		**font;			/* Font table for FB */
-	void		(*fbwritestr)(char *);	/* Write string to FB */
-	void		(*reboot)(char *);	/* e.g. reboot("sd()vmlinux") */
-	unsigned char	*linebuf;		/* The line input buffer */
-	unsigned char	**lineptr;		/* Cur pointer into linebuf */
-	int		*linesize;		/* length of line in linebuf */
-	void		(*getline)(char *);	/* Get line from user */
-	unsigned char	(*getnextchar)(void);	/* Get next char from linebuf */
-	unsigned char	(*peeknextchar)(void);	/* Peek at next char */
-	int		*fbthere;		/* =1 if frame buffer there */
-	int		(*getnum)(void);	/* Grab hex num from line */
-	int		(*printf)(char *, ...);	/* See prom_printf() instead */ 
-	void		(*printhex)(int);	/* Format N digits in hex */
-	unsigned char	*leds;			/* RAM copy of LED register */
-	void		(*setLEDs)(unsigned char *);	/* Sets LED's and RAM copy */
-	void		(*NMIaddr)(void *);	/* Addr for level 7 vector */
-	void		(*abortentry)(void);	/* Entry for keyboard abort */
-	int		*nmiclock;		/* Counts up in msec */
-	int		*FBtype;		/* Frame buffer type */
- 	unsigned int	romvecversion;		/* Version number for this romvec */
-	struct globram  *globram;		/* monitor global variables ??? */
-	void *		kbdaddr;		/* Addr of keyboard in use */
-	int		*keyrinit;		/* ms before kbd repeat */
-	unsigned char	*keyrtick; 		/* ms between repetitions */
-	unsigned int	*memoryavail;		/* V1: Main mem usable size */
-	long		*resetaddr;		/* where to jump on a reset */
-	long		*resetmap;		/* pgmap entry for resetaddr */
-	void		(*exittomon)(void);	/* Exit from user program */
-	unsigned char	**memorybitmap;		/* V1: &{0 or &bits} */
-	void		(*setcxsegmap)(int ctxt, char *va, int pmeg);	/* Set seg in any context */
-	void		(**vector_cmd)(void *);	/* V2: Handler for 'v' cmd */
-	unsigned long	*expectedtrapsig;	/* V3: Location of the expected trap signal */
-	unsigned long	*trapvectorbasetable;	/* V3: Address of the trap vector table */
-	int		unused1;
-	int		unused2;
-	int		unused3;
-	int		unused4;
-} linux_sun4_romvec;
-
-extern linux_sun4_romvec *sun4_romvec;
-
-#endif /* _SUN4PROM_H_ */
diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h
index b4b0244..8623fc4 100644
--- a/arch/sparc/include/asm/system_32.h
+++ b/arch/sparc/include/asm/system_32.h
@@ -34,13 +34,7 @@ enum sparc_cpu {
 
 extern enum sparc_cpu sparc_cpu_model;
 
-#ifndef CONFIG_SUN4
-#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
-#define ARCH_SUN4 0
-#else
-#define ARCH_SUN4C_SUN4 1
-#define ARCH_SUN4 1
-#endif
+#define ARCH_SUN4C (sparc_cpu_model==sun4c)
 
 #define SUN4M_NCPUS            4              /* Architectural limit of sun4m. */
 
@@ -55,6 +49,7 @@ extern unsigned long empty_zero_page;
 extern void sun_do_break(void);
 extern int serial_console;
 extern int stop_a_enabled;
+extern int scons_pwroff;
 
 static inline int con_is_present(void)
 {
diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
index db9e742..8759f2a 100644
--- a/arch/sparc/include/asm/system_64.h
+++ b/arch/sparc/include/asm/system_64.h
@@ -26,9 +26,8 @@ enum sparc_cpu {
 
 #define sparc_cpu_model sun4u
 
-/* This cannot ever be a sun4c nor sun4 :) That's just history. */
-#define ARCH_SUN4C_SUN4 0
-#define ARCH_SUN4 0
+/* This cannot ever be a sun4c :) That's just history. */
+#define ARCH_SUN4C 0
 
 extern char reboot_command[];
 
@@ -118,6 +117,7 @@ do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
 
 extern void sun_do_break(void);
 extern int stop_a_enabled;
+extern int scons_pwroff;
 
 extern void fault_in_user_windows(void);
 extern void synchronize_user_stack(void);
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index cbb892d..80fe547 100644
--- a/arch/sparc/include/asm/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -80,11 +80,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
 /*
  * thread information allocation
  */
-#if PAGE_SHIFT == 13
-#define THREAD_INFO_ORDER  0
-#else /* PAGE_SHIFT */
 #define THREAD_INFO_ORDER  1
-#endif
 
 #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
 
@@ -139,6 +135,7 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
 #define TIF_POLLING_NRFLAG	9	/* true if poll_idle() is polling
 					 * TIF_NEED_RESCHED */
 #define TIF_MEMDIE		10
+#define TIF_FREEZE		11	/* is freezing for suspend */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -152,6 +149,7 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
 #define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | \
 					 _TIF_SIGPENDING | \
 					 _TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index c0a737d..639ac80 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -237,6 +237,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define TIF_ABI_PENDING		12
 #define TIF_MEMDIE		13
 #define TIF_POLLING_NRFLAG	14
+#define TIF_FREEZE		15	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
@@ -249,6 +250,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #define _TIF_USER_WORK_MASK	((0xff << TI_FLAG_WSAVED_SHIFT) | \
 				 _TIF_DO_NOTIFY_RESUME_MASK | \
diff --git a/arch/sparc/include/asm/timer_32.h b/arch/sparc/include/asm/timer_32.h
index 361e538..2ec030e 100644
--- a/arch/sparc/include/asm/timer_32.h
+++ b/arch/sparc/include/asm/timer_32.h
@@ -9,96 +9,9 @@
 #define _SPARC_TIMER_H
 
 #include <asm/system.h>  /* For SUN4M_NCPUS */
-#include <asm/sun4paddr.h>
 #include <asm/btfixup.h>
 
-/* Timer structures. The interrupt timer has two properties which
- * are the counter (which is handled in do_timer in sched.c) and the limit.
- * This limit is where the timer's counter 'wraps' around. Oddly enough,
- * the sun4c timer when it hits the limit wraps back to 1 and not zero
- * thus when calculating the value at which it will fire a microsecond you
- * must adjust by one.  Thanks SUN for designing such great hardware ;(
- */
-
-/* Note that I am only going to use the timer that interrupts at
- * Sparc IRQ 10.  There is another one available that can fire at
- * IRQ 14. Currently it is left untouched, we keep the PROM's limit
- * register value and let the prom take these interrupts.  This allows
- * L1-A to work.
- */
-
-struct sun4c_timer_info {
-  __volatile__ unsigned int cur_count10;
-  __volatile__ unsigned int timer_limit10;
-  __volatile__ unsigned int cur_count14;
-  __volatile__ unsigned int timer_limit14;
-};
-
-#define SUN4C_TIMER_PHYSADDR   0xf3000000
-#ifdef CONFIG_SUN4
-#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
-#else
-#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
-#endif
-
-/* A sun4m has two blocks of registers which are probably of the same
- * structure. LSI Logic's L64851 is told to _decrement_ from the limit
- * value. Aurora behaves similarly but its limit value is compacted in
- * other fashion (it's wider). Documented fields are defined here.
- */
-
-/* As with the interrupt register, we have two classes of timer registers
- * which are per-cpu and master.  Per-cpu timers only hit that cpu and are
- * only level 14 ticks, master timer hits all cpus and is level 10.
- */
-
-#define SUN4M_PRM_CNT_L       0x80000000
-#define SUN4M_PRM_CNT_LVALUE  0x7FFFFC00
-
-struct sun4m_timer_percpu_info {
-  __volatile__ unsigned int l14_timer_limit;    /* Initial value is 0x009c4000 */
-  __volatile__ unsigned int l14_cur_count;
-
-  /* This register appears to be write only and/or inaccessible
-   * on Uni-Processor sun4m machines.
-   */
-  __volatile__ unsigned int l14_limit_noclear;  /* Data access error is here */
-
-  __volatile__ unsigned int cntrl;            /* =1 after POST on Aurora */
-  __volatile__ unsigned char space[PAGE_SIZE - 16];
-};
-
-struct sun4m_timer_regs {
-	struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
-	volatile unsigned int l10_timer_limit;
-	volatile unsigned int l10_cur_count;
-
-	/* Again, this appears to be write only and/or inaccessible
-	 * on uni-processor sun4m machines.
-	 */
-	volatile unsigned int l10_limit_noclear;
-
-	/* This register too, it must be magic. */
-	volatile unsigned int foobar;
-
-	volatile unsigned int cfg;     /* equals zero at boot time... */
-};
-
-#define SUN4D_PRM_CNT_L       0x80000000
-#define SUN4D_PRM_CNT_LVALUE  0x7FFFFC00
-
-struct sun4d_timer_regs {
-	volatile unsigned int l10_timer_limit;
-	volatile unsigned int l10_cur_countx;
-	volatile unsigned int l10_limit_noclear;
-	volatile unsigned int ctrl;
-	volatile unsigned int l10_cur_count;
-};
-
-extern struct sun4d_timer_regs *sun4d_timers;
-
 extern __volatile__ unsigned int *master_l10_counter;
-extern __volatile__ unsigned int *master_l10_limit;
 
 /* FIXME: Make do_[gs]ettimeofday btfixup calls */
 BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
diff --git a/arch/sparc/include/asm/vac-ops.h b/arch/sparc/include/asm/vac-ops.h
index d105276..a63e88e 100644
--- a/arch/sparc/include/asm/vac-ops.h
+++ b/arch/sparc/include/asm/vac-ops.h
@@ -76,11 +76,7 @@
  * cacheable bit in the pte's of all such pages.
  */
 
-#ifdef CONFIG_SUN4
-#define S4CVAC_BADBITS     0x0001e000
-#else
 #define S4CVAC_BADBITS    0x0000f000
-#endif
 
 /* The following is true if vaddr1 and vaddr2 would cause
  * a 'bad alias'.
@@ -94,10 +90,7 @@
  */
 struct sun4c_vac_props {
 	unsigned int num_bytes;     /* Size of the cache */
-	unsigned int num_lines;     /* Number of cache lines */
 	unsigned int do_hwflushes;  /* Hardware flushing available? */
-	enum { VAC_NONE, VAC_WRITE_THROUGH,
-	    VAC_WRITE_BACK } type;  /* What type of VAC? */
 	unsigned int linesize;      /* Size of each line in bytes */
 	unsigned int log2lsize;     /* log2(linesize) */
 	unsigned int on;            /* VAC is enabled */
diff --git a/arch/sparc/include/asm/vfc_ioctls.h b/arch/sparc/include/asm/vfc_ioctls.h
deleted file mode 100644
index af8b690..0000000
--- a/arch/sparc/include/asm/vfc_ioctls.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* Copyright (c) 1996 by Manish Vachharajani */
-
-#ifndef _LINUX_VFC_IOCTLS_H_
-#define	_LINUX_VFC_IOCTLS_H_
-
-	/* IOCTLs */
-#define VFC_IOCTL(a)          (('j' << 8) | a)
-#define VFCGCTRL	(VFC_IOCTL (0))	        /* get vfc attributes */
-#define VFCSCTRL	(VFC_IOCTL (1))  	/* set vfc attributes */
-#define VFCGVID		(VFC_IOCTL (2)) 	/* get video decoder attributes */
-#define VFCSVID		(VFC_IOCTL (3))	        /* set video decoder attributes */
-#define VFCHUE		(VFC_IOCTL (4))   	/* set hue */
-#define VFCPORTCHG	(VFC_IOCTL (5))  	/* change port */
-#define VFCRDINFO	(VFC_IOCTL (6))  	/* read info */
-
-	/* Options for setting the vfc attributes and status */
-#define MEMPRST		0x1	/* reset FIFO ptr. */
-#define CAPTRCMD	0x2	/* start capture and wait */
-#define DIAGMODE	0x3	/* diag mode */
-#define NORMMODE	0x4	/* normal mode */
-#define CAPTRSTR	0x5	/* start capture */
-#define CAPTRWAIT	0x6	/* wait for capture to finish */
-
-
-	/* Options for the decoder */
-#define STD_NTSC	0x1	/* NTSC mode */
-#define STD_PAL		0x2	/* PAL mode */
-#define COLOR_ON	0x3	/* force color ON */
-#define MONO		0x4	/* force color OFF */
-
-	/* Values returned by ioctl 2 */
-
-#define NO_LOCK	        1
-#define NTSC_COLOR	2
-#define NTSC_NOCOLOR    3
-#define PAL_COLOR	4
-#define PAL_NOCOLOR	5
-
-/* Not too sure what this does yet */
-	/* Options for setting Field number */
-#define ODD_FIELD	0x1
-#define EVEN_FIELD	0x0
-#define ACTIVE_ONLY     0x2
-#define NON_ACTIVE	0x0
-
-/* Debug options */
-#define VFC_I2C_SEND 0
-#define VFC_I2C_RECV 1
-
-struct vfc_debug_inout
-{
-	unsigned long addr;
-	unsigned long ret;
-	unsigned long len;
-	unsigned char __user *buffer;
-};
-
-#endif /* _LINUX_VFC_IOCTLS_H_ */
diff --git a/arch/sparc/include/asm/visasm.h b/arch/sparc/include/asm/visasm.h
index de797b9..39ca301 100644
--- a/arch/sparc/include/asm/visasm.h
+++ b/arch/sparc/include/asm/visasm.h
@@ -57,6 +57,7 @@ static inline void save_and_clear_fpu(void) {
 "		" : : "i" (FPRS_FEF|FPRS_DU) :
 		"o5", "g1", "g2", "g3", "g7", "cc");
 }
+extern int vis_emul(struct pt_regs *, unsigned int);
 #endif
 
 #endif /* _SPARC64_ASI_H */
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 6e03a2a..2d65820 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -13,15 +13,13 @@ obj-y    := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \
 	    time.o windows.o cpu.o devices.o \
 	    tadpole.o tick14.o ptrace.o \
 	    unaligned.o una_asm.o muldiv.o \
-	    prom.o of_device.o devres.o
+	    prom.o of_device.o devres.o dma.o
 
 devres-y = ../../../kernel/irq/devres.o
 
 obj-$(CONFIG_PCI) += pcic.o
-obj-$(CONFIG_SUN4) += sun4setup.o
 obj-$(CONFIG_SMP) += trampoline.o smp.o sun4m_smp.o sun4d_smp.o
 obj-$(CONFIG_SUN_AUXIO) += auxio.o
-obj-$(CONFIG_PCI) += ebus.o
 obj-$(CONFIG_SUN_PM) += apc.o pmc.o
 obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o
 obj-$(CONFIG_SPARC_LED) += led.o
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 5267d48..9c11582 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -12,9 +12,10 @@
 #include <linux/miscdevice.h>
 #include <linux/smp_lock.h>
 #include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
-#include <asm/sbus.h>
 #include <asm/oplib.h>
 #include <asm/uaccess.h>
 #include <asm/auxio.h>
@@ -29,11 +30,10 @@
 #define APC_OBPNAME	"power-management"
 #define APC_DEVNAME "apc"
 
-volatile static u8 __iomem *regs; 
-static int apc_regsize;
-static int apc_no_idle __initdata = 0;
+static u8 __iomem *regs;
+static int apc_no_idle __devinitdata = 0;
 
-#define apc_readb(offs)			(sbus_readb(regs+offs))
+#define apc_readb(offs)		(sbus_readb(regs+offs))
 #define apc_writeb(val, offs) 	(sbus_writeb(val, regs+offs))
 
 /* Specify "apc=noidle" on the kernel command line to 
@@ -69,9 +69,9 @@ static void apc_swift_idle(void)
 #endif
 } 
 
-static inline void apc_free(void)
+static inline void apc_free(struct of_device *op)
 {
-	sbus_iounmap(regs, apc_regsize);
+	of_iounmap(&op->resource[0], regs, resource_size(&op->resource[0]));
 }
 
 static int apc_open(struct inode *inode, struct file *f)
@@ -153,52 +153,56 @@ static const struct file_operations apc_fops = {
 
 static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops };
 
-static int __init apc_probe(void)
+static int __devinit apc_probe(struct of_device *op,
+			       const struct of_device_id *match)
 {
-	struct sbus_bus *sbus = NULL;
-	struct sbus_dev *sdev = NULL;
-	int iTmp = 0;
-
-	for_each_sbus(sbus) {
-		for_each_sbusdev(sdev, sbus) {
-			if (!strcmp(sdev->prom_name, APC_OBPNAME)) {
-				goto sbus_done;
-			}
-		}
-	}
+	int err;
 
-sbus_done:
-	if (!sdev) {
-		return -ENODEV;
-	}
-
-	apc_regsize = sdev->reg_addrs[0].reg_size;
-	regs = sbus_ioremap(&sdev->resource[0], 0, 
-				   apc_regsize, APC_OBPNAME);
-	if(!regs) {
+	regs = of_ioremap(&op->resource[0], 0,
+			  resource_size(&op->resource[0]), APC_OBPNAME);
+	if (!regs) {
 		printk(KERN_ERR "%s: unable to map registers\n", APC_DEVNAME);
 		return -ENODEV;
 	}
 
-	iTmp = misc_register(&apc_miscdev);
-	if (iTmp != 0) {
+	err = misc_register(&apc_miscdev);
+	if (err) {
 		printk(KERN_ERR "%s: unable to register device\n", APC_DEVNAME);
-		apc_free();
+		apc_free(op);
 		return -ENODEV;
 	}
 
 	/* Assign power management IDLE handler */
-	if(!apc_no_idle)
+	if (!apc_no_idle)
 		pm_idle = apc_swift_idle;	
 
 	printk(KERN_INFO "%s: power management initialized%s\n", 
-		APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : "");
+	       APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : "");
+
 	return 0;
 }
 
+static struct of_device_id __initdata apc_match[] = {
+	{
+		.name = APC_OBPNAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, apc_match);
+
+static struct of_platform_driver apc_driver = {
+	.name		= "apc",
+	.match_table	= apc_match,
+	.probe		= apc_probe,
+};
+
+static int __init apc_init(void)
+{
+	return of_register_driver(&apc_driver, &of_bus_type);
+}
+
 /* This driver is not critical to the boot process
  * and is easiest to ioremap when SBus is already
  * initialized, so we install ourselves thusly:
  */
-__initcall(apc_probe);
-
+__initcall(apc_init);
diff --git a/arch/sparc/kernel/auxio.c b/arch/sparc/kernel/auxio.c
index baf4ed3..09c8572 100644
--- a/arch/sparc/kernel/auxio.c
+++ b/arch/sparc/kernel/auxio.c
@@ -6,6 +6,8 @@
 #include <linux/stddef.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <asm/oplib.h>
 #include <asm/io.h>
 #include <asm/auxio.h>
@@ -59,7 +61,7 @@ void __init auxio_probe(void)
 	r.flags = auxregs[0].which_io & 0xF;
 	r.start = auxregs[0].phys_addr;
 	r.end = auxregs[0].phys_addr + auxregs[0].reg_size - 1;
-	auxio_register = sbus_ioremap(&r, 0, auxregs[0].reg_size, "auxio");
+	auxio_register = of_ioremap(&r, 0, auxregs[0].reg_size, "auxio");
 	/* Fix the address on sun4m and sun4c. */
 	if((((unsigned long) auxregs[0].phys_addr) & 3) == 3 ||
 	   sparc_cpu_model == sun4c)
@@ -128,7 +130,7 @@ void __init auxio_power_probe(void)
 	r.flags = regs.which_io & 0xF;
 	r.start = regs.phys_addr;
 	r.end = regs.phys_addr + regs.reg_size - 1;
-	auxio_power_register = (unsigned char *) sbus_ioremap(&r, 0,
+	auxio_power_register = (unsigned char *) of_ioremap(&r, 0,
 	    regs.reg_size, "auxpower");
 
 	/* Display a quick message on the console. */
diff --git a/arch/sparc/kernel/devices.c b/arch/sparc/kernel/devices.c
index b240b88..ad656b0 100644
--- a/arch/sparc/kernel/devices.c
+++ b/arch/sparc/kernel/devices.c
@@ -143,7 +143,7 @@ void __init device_scan(void)
 #endif
 	clock_stop_probe();
 
-	if (ARCH_SUN4C_SUN4)
+	if (ARCH_SUN4C)
 		sun4c_probe_memerr_reg();
 
 	return;
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
new file mode 100644
index 0000000..ebc8403
--- /dev/null
+++ b/arch/sparc/kernel/dma.c
@@ -0,0 +1,227 @@
+/* dma.c: PCI and SBUS DMA accessors for 32-bit sparc.
+ *
+ * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+
+#ifdef CONFIG_PCI
+#include <linux/pci.h>
+#endif
+
+#include "dma.h"
+
+int dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_dma_supported(to_pci_dev(dev), mask);
+#endif
+	return 0;
+}
+EXPORT_SYMBOL(dma_supported);
+
+int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+#endif
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, gfp_t flag)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle);
+#endif
+	return sbus_alloc_consistent(dev, size, dma_handle);
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *dev, size_t size,
+		       void *cpu_addr, dma_addr_t dma_handle)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_free_consistent(to_pci_dev(dev), size,
+				    cpu_addr, dma_handle);
+		return;
+	}
+#endif
+	sbus_free_consistent(dev, size, cpu_addr, dma_handle);
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+			  size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_map_single(to_pci_dev(dev), cpu_addr,
+				      size, (int)direction);
+#endif
+	return sbus_map_single(dev, cpu_addr, size, (int)direction);
+}
+EXPORT_SYMBOL(dma_map_single);
+
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+		      size_t size,
+		      enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_unmap_single(to_pci_dev(dev), dma_addr,
+				 size, (int)direction);
+		return;
+	}
+#endif
+	sbus_unmap_single(dev, dma_addr, size, (int)direction);
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+			unsigned long offset, size_t size,
+			enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_map_page(to_pci_dev(dev), page, offset,
+				    size, (int)direction);
+#endif
+	return sbus_map_single(dev, page_address(page) + offset,
+			       size, (int)direction);
+}
+EXPORT_SYMBOL(dma_map_page);
+
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+		    size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_unmap_page(to_pci_dev(dev), dma_address,
+			       size, (int)direction);
+		return;
+	}
+#endif
+	sbus_unmap_single(dev, dma_address, size, (int)direction);
+}
+EXPORT_SYMBOL(dma_unmap_page);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
+#endif
+	return sbus_map_sg(dev, sg, nents, direction);
+}
+EXPORT_SYMBOL(dma_map_sg);
+
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+		  int nents, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_unmap_sg(to_pci_dev(dev), sg, nents, (int)direction);
+		return;
+	}
+#endif
+	sbus_unmap_sg(dev, sg, nents, (int)direction);
+}
+EXPORT_SYMBOL(dma_unmap_sg);
+
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			     size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
+					    size, (int)direction);
+		return;
+	}
+#endif
+	sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction);
+}
+EXPORT_SYMBOL(dma_sync_single_for_cpu);
+
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+				size_t size, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
+					       size, (int)direction);
+		return;
+	}
+#endif
+	sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction);
+}
+EXPORT_SYMBOL(dma_sync_single_for_device);
+
+void dma_sync_single_range_for_cpu(struct device *dev,
+				   dma_addr_t dma_handle,
+				   unsigned long offset,
+				   size_t size,
+				   enum dma_data_direction direction)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
+
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
+
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+			 int nelems, enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg,
+					nelems, (int)direction);
+		return;
+	}
+#endif
+	BUG();
+}
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+
+void dma_sync_sg_for_device(struct device *dev,
+			    struct scatterlist *sg, int nelems,
+			    enum dma_data_direction direction)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		pci_dma_sync_sg_for_device(to_pci_dev(dev), sg,
+					   nelems, (int)direction);
+		return;
+	}
+#endif
+	BUG();
+}
+EXPORT_SYMBOL(dma_sync_sg_for_device);
+
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return (dma_addr == DMA_ERROR_CODE);
+}
+EXPORT_SYMBOL(dma_mapping_error);
+
+int dma_get_cache_alignment(void)
+{
+	return 32;
+}
+EXPORT_SYMBOL(dma_get_cache_alignment);
diff --git a/arch/sparc/kernel/dma.h b/arch/sparc/kernel/dma.h
new file mode 100644
index 0000000..f8d8951
--- /dev/null
+++ b/arch/sparc/kernel/dma.h
@@ -0,0 +1,14 @@
+void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp);
+void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba);
+dma_addr_t sbus_map_single(struct device *dev, void *va,
+			   size_t len, int direction);
+void sbus_unmap_single(struct device *dev, dma_addr_t ba,
+		       size_t n, int direction);
+int sbus_map_sg(struct device *dev, struct scatterlist *sg,
+		int n, int direction);
+void sbus_unmap_sg(struct device *dev, struct scatterlist *sg,
+		   int n, int direction);
+void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
+				  size_t size, int direction);
+void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba,
+				     size_t size, int direction);
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
deleted file mode 100644
index 9729423..0000000
--- a/arch/sparc/kernel/ebus.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- * ebus.c: PCI to EBus bridge device.
- *
- * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
- *
- * Adopted for sparc by V. Roganov and G. Raiko.
- * Fixes for different platforms by Pete Zaitcev.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include <asm/system.h>
-#include <asm/page.h>
-#include <asm/pbm.h>
-#include <asm/ebus.h>
-#include <asm/io.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/bpp.h>
-
-struct linux_ebus *ebus_chain = NULL;
-
-/* We are together with pcic.c under CONFIG_PCI. */
-extern unsigned int pcic_pin_to_irq(unsigned int, const char *name);
-
-/*
- * IRQ Blacklist
- * Here we list PROMs and systems that are known to supply crap as IRQ numbers.
- */
-struct ebus_device_irq {
-	char *name;
-	unsigned int pin;
-};
-
-struct ebus_system_entry {
-	char *esname;
-	struct ebus_device_irq *ipt;
-};
-
-static struct ebus_device_irq je1_1[] = {
-	{ "8042",		 3 },
-	{ "SUNW,CS4231",	 0 },
-	{ "parallel",		 0 },
-	{ "se",			 2 },
-	{ NULL, 0 }
-};
-
-/*
- * Gleb's JE1 supplied reasonable pin numbers, but mine did not (OBP 2.32).
- * Blacklist the sucker... Note that Gleb's system will work.
- */
-static struct ebus_system_entry ebus_blacklist[] = {
-	{ "SUNW,JavaEngine1", je1_1 },
-	{ NULL, NULL }
-};
-
-static struct ebus_device_irq *ebus_blackp = NULL;
-
-/*
- */
-static inline unsigned long ebus_alloc(size_t size)
-{
-	return (unsigned long)kmalloc(size, GFP_ATOMIC);
-}
-
-/*
- */
-static int __init ebus_blacklist_irq(const char *name)
-{
-	struct ebus_device_irq *dp;
-
-	if ((dp = ebus_blackp) != NULL) {
-		for (; dp->name != NULL; dp++) {
-			if (strcmp(name, dp->name) == 0) {
-				return pcic_pin_to_irq(dp->pin, name);
-			}
-		}
-	}
-	return 0;
-}
-
-static void __init fill_ebus_child(struct device_node *dp,
-				   struct linux_ebus_child *dev)
-{
-	const int *regs;
-	const int *irqs;
-	int i, len;
-
-	dev->prom_node = dp;
-	regs = of_get_property(dp, "reg", &len);
-	if (!regs)
-		len = 0;
-	dev->num_addrs = len / sizeof(regs[0]);
-
-	for (i = 0; i < dev->num_addrs; i++) {
-		if (regs[i] >= dev->parent->num_addrs) {
-			prom_printf("UGH: property for %s was %d, need < %d\n",
-				    dev->prom_node->name, len,
-				    dev->parent->num_addrs);
-			panic(__func__);
-		}
-
-		/* XXX resource */
-		dev->resource[i].start =
-			dev->parent->resource[regs[i]].start;
-	}
-
-	for (i = 0; i < PROMINTR_MAX; i++)
-		dev->irqs[i] = PCI_IRQ_NONE;
-
-	if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) {
-		dev->num_irqs = 1;
-	} else {
-		irqs = of_get_property(dp, "interrupts", &len);
-		if (!irqs) {
-			dev->num_irqs = 0;
-			dev->irqs[0] = 0;
-			if (dev->parent->num_irqs != 0) {
-				dev->num_irqs = 1;
-				dev->irqs[0] = dev->parent->irqs[0];
-			}
-		} else {
-			dev->num_irqs = len / sizeof(irqs[0]);
-			if (irqs[0] == 0 || irqs[0] >= 8) {
-				/*
-				 * XXX Zero is a valid pin number...
-				 * This works as long as Ebus is not wired
-				 * to INTA#.
-				 */
-				printk("EBUS: %s got bad irq %d from PROM\n",
-				       dev->prom_node->name, irqs[0]);
-				dev->num_irqs = 0;
-				dev->irqs[0] = 0;
-			} else {
-				dev->irqs[0] =
-					pcic_pin_to_irq(irqs[0],
-							dev->prom_node->name);
-			}
-		}
-	}
-}
-
-static void __init fill_ebus_device(struct device_node *dp,
-				    struct linux_ebus_device *dev)
-{
-	const struct linux_prom_registers *regs;
-	struct linux_ebus_child *child;
-	struct dev_archdata *sd;
-	const int *irqs;
-	int i, n, len;
-	unsigned long baseaddr;
-
-	dev->prom_node = dp;
-
-	regs = of_get_property(dp, "reg", &len);
-	if (!regs)
-		len = 0;
-	if (len % sizeof(struct linux_prom_registers)) {
-		prom_printf("UGH: proplen for %s was %d, need multiple of %d\n",
-			    dev->prom_node->name, len,
-			    (int)sizeof(struct linux_prom_registers));
-		panic(__func__);
-	}
-	dev->num_addrs = len / sizeof(struct linux_prom_registers);
-
-	for (i = 0; i < dev->num_addrs; i++) {
-		/*
-		 * XXX Collect JE-1 PROM
-		 * 
-		 * Example - JS-E with 3.11:
-		 *  /ebus
-		 *      regs 
-		 *        0x00000000, 0x0, 0x00000000, 0x0, 0x00000000,
-		 *        0x82000010, 0x0, 0xf0000000, 0x0, 0x01000000,
-		 *        0x82000014, 0x0, 0x38800000, 0x0, 0x00800000,
-		 *      ranges
-		 *        0x00, 0x00000000, 0x02000010, 0x0, 0x0, 0x01000000,
-		 *        0x01, 0x01000000, 0x02000014, 0x0, 0x0, 0x00800000,
-		 *  /ebus/8042
-		 *      regs
-		 *        0x00000001, 0x00300060, 0x00000008,
-		 *        0x00000001, 0x00300060, 0x00000008,
-		 */
-		n = regs[i].which_io;
-		if (n >= 4) {
-			/* XXX This is copied from old JE-1 by Gleb. */
-			n = (regs[i].which_io - 0x10) >> 2;
-		} else {
-			;
-		}
-
-/*
- * XXX Now as we have regions, why don't we make an on-demand allocation...
- */
-		dev->resource[i].start = 0;
-		if ((baseaddr = dev->bus->self->resource[n].start +
-		    regs[i].phys_addr) != 0) {
-			/* dev->resource[i].name = dev->prom_name; */
-			if ((baseaddr = (unsigned long) ioremap(baseaddr,
-			    regs[i].reg_size)) == 0) {
-				panic("ebus: unable to remap dev %s",
-				      dev->prom_node->name);
-			}
-		}
-		dev->resource[i].start = baseaddr;	/* XXX Unaligned */
-	}
-
-	for (i = 0; i < PROMINTR_MAX; i++)
-		dev->irqs[i] = PCI_IRQ_NONE;
-
-	if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) {
-		dev->num_irqs = 1;
-	} else {
-		irqs = of_get_property(dp, "interrupts", &len);
-		if (!irqs) {
-			dev->num_irqs = 0;
-			if ((dev->irqs[0] = dev->bus->self->irq) != 0) {
-				dev->num_irqs = 1;
-/* P3 */ /* printk("EBUS: child %s irq %d from parent\n", dev->prom_name, dev->irqs[0]); */
-			}
-		} else {
-			dev->num_irqs = 1;  /* dev->num_irqs = len / sizeof(irqs[0]); */
-			if (irqs[0] == 0 || irqs[0] >= 8) {
-				/* See above for the parent. XXX */
-				printk("EBUS: %s got bad irq %d from PROM\n",
-				       dev->prom_node->name, irqs[0]);
-				dev->num_irqs = 0;
-				dev->irqs[0] = 0;
-			} else {
-				dev->irqs[0] =
-					pcic_pin_to_irq(irqs[0],
-							dev->prom_node->name);
-			}
-		}
-	}
-
-	sd = &dev->ofdev.dev.archdata;
-	sd->prom_node = dp;
-	sd->op = &dev->ofdev;
-	sd->iommu = dev->bus->ofdev.dev.parent->archdata.iommu;
-
-	dev->ofdev.node = dp;
-	dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
-	dev->ofdev.dev.bus = &ebus_bus_type;
-	sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node);
-
-	/* Register with core */
-	if (of_device_register(&dev->ofdev) != 0)
-		printk(KERN_DEBUG "ebus: device registration error for %s!\n",
-		       dp->path_component_name);
-
-	if ((dp = dp->child) != NULL) {
-		dev->children = (struct linux_ebus_child *)
-			ebus_alloc(sizeof(struct linux_ebus_child));
-
-		child = dev->children;
-		child->next = NULL;
-		child->parent = dev;
-		child->bus = dev->bus;
-		fill_ebus_child(dp, child);
-
-		while ((dp = dp->sibling) != NULL) {
-			child->next = (struct linux_ebus_child *)
-				ebus_alloc(sizeof(struct linux_ebus_child));
-
-			child = child->next;
-			child->next = NULL;
-			child->parent = dev;
-			child->bus = dev->bus;
-			fill_ebus_child(dp, child);
-		}
-	}
-}
-
-void __init ebus_init(void)
-{
-	const struct linux_prom_pci_registers *regs;
-	struct linux_pbm_info *pbm;
-	struct linux_ebus_device *dev;
-	struct linux_ebus *ebus;
-	struct ebus_system_entry *sp;
-	struct pci_dev *pdev;
-	struct pcidev_cookie *cookie;
-	struct device_node *dp;
-	struct resource *p;
-	unsigned short pci_command;
-	int len, reg, nreg;
-	int num_ebus = 0;
-
-	dp = of_find_node_by_path("/");
-	for (sp = ebus_blacklist; sp->esname != NULL; sp++) {
-		if (strcmp(dp->name, sp->esname) == 0) {
-			ebus_blackp = sp->ipt;
-			break;
-		}
-	}
-
-	pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_EBUS, NULL);
-	if (!pdev)
-		return;
-
-	cookie = pdev->sysdata;
-	dp = cookie->prom_node;
-
-	ebus_chain = ebus = (struct linux_ebus *)
-			ebus_alloc(sizeof(struct linux_ebus));
-	ebus->next = NULL;
-
-	while (dp) {
-		struct device_node *nd;
-
-		ebus->prom_node = dp;
-		ebus->self = pdev;
-		ebus->parent = pbm = cookie->pbm;
-
-		/* Enable BUS Master. */
-		pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
-		pci_command |= PCI_COMMAND_MASTER;
-		pci_write_config_word(pdev, PCI_COMMAND, pci_command);
-
-		regs = of_get_property(dp, "reg", &len);
-		if (!regs) {
-			prom_printf("%s: can't find reg property\n",
-				    __func__);
-			prom_halt();
-		}
-		nreg = len / sizeof(struct linux_prom_pci_registers);
-
-		p = &ebus->self->resource[0];
-		for (reg = 0; reg < nreg; reg++) {
-			if (!(regs[reg].which_io & 0x03000000))
-				continue;
-
-			(p++)->start = regs[reg].phys_lo;
-		}
-
-		ebus->ofdev.node = dp;
-		ebus->ofdev.dev.parent = &pdev->dev;
-		ebus->ofdev.dev.bus = &ebus_bus_type;
-		sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus);
-
-		/* Register with core */
-		if (of_device_register(&ebus->ofdev) != 0)
-			printk(KERN_DEBUG "ebus: device registration error for %s!\n",
-			       dp->path_component_name);
-
-
-		nd = dp->child;
-		if (!nd)
-			goto next_ebus;
-
-		ebus->devices = (struct linux_ebus_device *)
-				ebus_alloc(sizeof(struct linux_ebus_device));
-
-		dev = ebus->devices;
-		dev->next = NULL;
-		dev->children = NULL;
-		dev->bus = ebus;
-		fill_ebus_device(nd, dev);
-
-		while ((nd = nd->sibling) != NULL) {
-			dev->next = (struct linux_ebus_device *)
-				ebus_alloc(sizeof(struct linux_ebus_device));
-
-			dev = dev->next;
-			dev->next = NULL;
-			dev->children = NULL;
-			dev->bus = ebus;
-			fill_ebus_device(nd, dev);
-		}
-
-	next_ebus:
-		pdev = pci_get_device(PCI_VENDOR_ID_SUN,
-				       PCI_DEVICE_ID_SUN_EBUS, pdev);
-		if (!pdev)
-			break;
-
-		cookie = pdev->sysdata;
-		dp = cookie->prom_node;
-
-		ebus->next = (struct linux_ebus *)
-			ebus_alloc(sizeof(struct linux_ebus));
-		ebus = ebus->next;
-		ebus->next = NULL;
-		++num_ebus;
-	}
-	if (pdev)
-		pci_dev_put(pdev);
-}
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index e8cdf71..faf9ccd 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -20,11 +20,7 @@
 #include <asm/memreg.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#ifdef CONFIG_SUN4
-#include <asm/pgtsun4.h>
-#else
 #include <asm/pgtsun4c.h>
-#endif
 #include <asm/winmacro.h>
 #include <asm/signal.h>
 #include <asm/obio.h>
@@ -276,17 +272,18 @@ smp4m_ticker:
 	 */
 maybe_smp4m_msg:
 	GET_PROCESSOR4M_ID(o3)
-	set	sun4m_interrupts, %l5
-	ld	[%l5], %o5
+	sethi	%hi(sun4m_irq_percpu), %l5
+	sll	%o3, 2, %o3
+	or	%l5, %lo(sun4m_irq_percpu), %o5
 	sethi	%hi(0x40000000), %o2
-	sll	%o3, 12, %o3
 	ld	[%o5 + %o3], %o1
-	andcc	%o1, %o2, %g0
+	ld	[%o1 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
+	andcc	%o3, %o2, %g0
 	be,a	smp4m_ticker
 	 cmp	%l7, 14
-	st	%o2, [%o5 + 0x4]
+	st	%o2, [%o1 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x40000000
 	WRITE_PAUSE
-	ld	[%o5], %g0
+	ld	[%o1 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
 	WRITE_PAUSE
 	or	%l0, PSR_PIL, %l4
 	wr	%l4, 0x0, %psr
@@ -304,16 +301,16 @@ linux_trap_ipi15_sun4m:
 	SAVE_ALL
 	sethi	%hi(0x80000000), %o2
 	GET_PROCESSOR4M_ID(o0)
-	set	sun4m_interrupts, %l5
-	ld	[%l5], %o5
-	sll	%o0, 12, %o0
-	add	%o5, %o0, %o5
-	ld	[%o5], %o3
+	sethi	%hi(sun4m_irq_percpu), %l5
+	or	%l5, %lo(sun4m_irq_percpu), %o5
+	sll	%o0, 2, %o0
+	ld	[%o5 + %o0], %o5
+	ld	[%o5 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
 	andcc	%o3, %o2, %g0
 	be	1f			! Must be an NMI async memory error
-	 st	%o2, [%o5 + 4]
+	 st	%o2, [%o5 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x80000000
 	WRITE_PAUSE
-	ld	[%o5], %g0
+	ld	[%o5 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
 	WRITE_PAUSE
 	or	%l0, PSR_PIL, %l4
 	wr	%l4, 0x0, %psr
@@ -327,12 +324,11 @@ linux_trap_ipi15_sun4m:
 1:
 	/* NMI async memory error handling. */
 	sethi	%hi(0x80000000), %l4
-	sethi	%hi(0x4000), %o3
-	sub	%o5, %o0, %o5
-	add	%o5, %o3, %l5
-	st	%l4, [%l5 + 0xc]
+	sethi	%hi(sun4m_irq_global), %o5
+	ld	[%o5 + %lo(sun4m_irq_global)], %l5
+	st	%l4, [%l5 + 0x0c]	! sun4m_irq_global->mask_set=0x80000000
 	WRITE_PAUSE
-	ld	[%l5], %g0
+	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
 	WRITE_PAUSE
 	or	%l0, PSR_PIL, %l4
 	wr	%l4, 0x0, %psr
@@ -341,9 +337,9 @@ linux_trap_ipi15_sun4m:
 	WRITE_PAUSE
 	call	sun4m_nmi
 	 nop
-	st	%l4, [%l5 + 0x8]
+	st	%l4, [%l5 + 0x08]	! sun4m_irq_global->mask_clear=0x80000000
 	WRITE_PAUSE
-	ld	[%l5], %g0
+	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
 	WRITE_PAUSE
 	RESTORE_ALL
 
@@ -775,11 +771,7 @@ vac_linesize_patch_32:		subcc	%l7, 32, %l7
  * Ugly, but we cant use hardware flushing on the sun4 and we'd require
  * two instructions (Anton)
  */
-#ifdef CONFIG_SUN4
-vac_hwflush_patch1_on:		nop
-#else
 vac_hwflush_patch1_on:		addcc	%l7, -PAGE_SIZE, %l7
-#endif
 
 vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 
@@ -798,42 +790,10 @@ vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 ! %l7 = 1 for textfault
 ! We want error in %l5, vaddr in %l6
 sun4c_fault:
-#ifdef CONFIG_SUN4
-	sethi	%hi(sun4c_memerr_reg), %l4
-	ld	[%l4+%lo(sun4c_memerr_reg)], %l4  ! memerr ctrl reg addr
-	ld	[%l4], %l6		! memerr ctrl reg
-	ld	[%l4 + 4], %l5		! memerr vaddr reg
-	andcc	%l6, 0x80, %g0		! check for error type
-	st	%g0, [%l4 + 4]		! clear the error
-	be	0f			! normal error
-	 sethi	%hi(AC_BUS_ERROR), %l4	! bus err reg addr
-
-	call	prom_halt	! something weird happened
-					! what exactly did happen?
-					! what should we do here?
-
-0:	or	%l4, %lo(AC_BUS_ERROR), %l4	! bus err reg addr
-	lduba	[%l4] ASI_CONTROL, %l6	! bus err reg
-
-	cmp    %l7, 1			! text fault?
-	be	1f			! yes
-	 nop
-
-	ld     [%l1], %l4		! load instruction that caused fault
-	srl	%l4, 21, %l4
-	andcc	%l4, 1, %g0		! store instruction?
-
-	be	1f			! no
-	 sethi	%hi(SUN4C_SYNC_BADWRITE), %l4 ! yep
-					! %lo(SUN4C_SYNC_BADWRITE) = 0
-	or	%l4, %l6, %l6		! set write bit to emulate sun4c
-1:
-#else
 	sethi	%hi(AC_SYNC_ERR), %l4
 	add	%l4, 0x4, %l6			! AC_SYNC_VA in %l6
 	lda	[%l6] ASI_CONTROL, %l5		! Address
 	lda	[%l4] ASI_CONTROL, %l6		! Error, retained for a bit
-#endif
 
 	andn	%l5, 0xfff, %l5			! Encode all info into l7
 	srl	%l6, 14, %l4
@@ -880,12 +840,7 @@ sun4c_fault:
 	or      %l4, %lo(swapper_pg_dir), %l4
 	sll     %l6, 2, %l6
 	ld      [%l4 + %l6], %l4
-#ifdef CONFIG_SUN4
-	sethi	%hi(PAGE_MASK), %l6
-	andcc	%l4, %l6, %g0
-#else
 	andcc   %l4, PAGE_MASK, %g0
-#endif
 	be      sun4c_fault_fromuser
 	 lduXa  [%l5] ASI_SEGMAP, %l4
 
@@ -937,11 +892,7 @@ invalid_segment_patch1:
 	ld	[%l6 + 0x08], %l3	! tmp = entry->vaddr
 
 	! Flush segment from the cache.
-#ifdef CONFIG_SUN4
-	sethi	%hi((128 * 1024)), %l7
-#else
 	sethi	%hi((64 * 1024)), %l7
-#endif
 9:
 vac_hwflush_patch1:
 vac_linesize_patch:
@@ -1029,12 +980,7 @@ invalid_segment_patch2:
 	or	%l4, %lo(swapper_pg_dir), %l4
 	sll	%l3, 2, %l3
 	ld	[%l4 + %l3], %l4
-#ifndef CONFIG_SUN4
 	and	%l4, PAGE_MASK, %l4
-#else
-	sethi	%hi(PAGE_MASK), %l6
-	and	%l4, %l6, %l4
-#endif
 
 	srl	%l5, (PAGE_SHIFT - 2), %l6
 	and	%l6, ((SUN4C_PTRS_PER_PTE - 1) << 2), %l6
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 50d9a16..2fe2c11 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -63,15 +63,9 @@ cputypvar_sun4m:
 
 	.align 4
 
-#ifndef CONFIG_SUN4
 sun4_notsup:
-	.asciz	"Sparc-Linux sun4 needs a specially compiled kernel, turn CONFIG_SUN4 on.\n\n"
+	.asciz	"Sparc-Linux sun4 support does no longer exist.\n\n"
 	.align 4
-#else
-sun4cdm_notsup:
-	.asciz	"Kernel compiled with CONFIG_SUN4 cannot run on SUN4C/SUN4M/SUN4D\nTurn CONFIG_SUN4 off.\n\n"
-	.align 4
-#endif
 
 sun4e_notsup:
         .asciz  "Sparc-Linux sun4e support does not exist\n\n"
@@ -471,6 +465,7 @@ gokernel:
 		mov	%o7, %g4		! Save %o7
 
 		/* Jump to it, and pray... */
+		__INIT
 current_pc:
 		call	1f
 		 nop
@@ -780,15 +775,6 @@ execute_in_high_mem:
 		 nop
 
 found_version:
-#ifdef CONFIG_SUN4
-/* For people who try sun4 kernels, even if Configure.help advises them. */
-		ld	[%g7 + 0x68], %o1
-		set	sun4cdm_notsup, %o0
-		call	%o1
-		 nop
-		b	halt_me
-		 nop
-#endif
 /* Get the machine type via the mysterious romvec node operations. */
 
 		add	%g7, 0x1c, %l1		
@@ -1150,15 +1136,6 @@ sun4c_continue_boot:
 		 nop
 
 sun4_init:
-#ifdef CONFIG_SUN4
-/* There, happy now Adrian? */
-		set	cputypval, %o2		! Let everyone know we
-		set	' ', %o0			! are a "sun4 " architecture
-		stb	%o0, [%o2 + 0x4]		
-
-		b got_prop 
-		 nop
-#else
 		sethi   %hi(SUN4_PROM_VECTOR+0x84), %o1
 		ld      [%o1 + %lo(SUN4_PROM_VECTOR+0x84)], %o1
 		set     sun4_notsup, %o0
@@ -1170,7 +1147,7 @@ sun4_init:
 		 nop
 1:		ba      1b                      ! Cannot exit into KMON
 		 nop
-#endif
+
 no_sun4e_here:
 		ld	[%g7 + 0x68], %o1
 		set	sun4e_notsup, %o0
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index fc511f3..223a658 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -12,10 +12,6 @@
 #include <asm/oplib.h>
 #include <asm/idprom.h>
 #include <asm/machines.h>  /* Fun with Sun released architectures. */
-#ifdef CONFIG_SUN4
-#include <asm/sun4paddr.h>
-extern void sun4setup(void);
-#endif
 
 struct idprom *idprom;
 static struct idprom idprom_buffer;
@@ -101,7 +97,4 @@ void __init idprom_init(void)
 		    idprom->id_ethaddr[0], idprom->id_ethaddr[1],
 		    idprom->id_ethaddr[2], idprom->id_ethaddr[3],
 		    idprom->id_ethaddr[4], idprom->id_ethaddr[5]);
-#ifdef CONFIG_SUN4
-	sun4setup();
-#endif
 }
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 2a8a847..4f025b3 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -42,10 +42,13 @@
 #include <asm/vaddrs.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/sbus.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/dma.h>
+#include <asm/iommu.h>
+#include <asm/io-unit.h>
+
+#include "dma.h"
 
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
 
@@ -139,15 +142,6 @@ void iounmap(volatile void __iomem *virtual)
 	}
 }
 
-/*
- */
-void __iomem *sbus_ioremap(struct resource *phyres, unsigned long offset,
-    unsigned long size, char *name)
-{
-	return _sparc_alloc_io(phyres->flags & 0xF,
-	    phyres->start + offset, size, name);
-}
-
 void __iomem *of_ioremap(struct resource *res, unsigned long offset,
 			 unsigned long size, char *name)
 {
@@ -164,13 +158,6 @@ void of_iounmap(struct resource *res, void __iomem *base, unsigned long size)
 EXPORT_SYMBOL(of_iounmap);
 
 /*
- */
-void sbus_iounmap(volatile void __iomem *addr, unsigned long size)
-{
-	iounmap(addr);
-}
-
-/*
  * Meat of mapping
  */
 static void __iomem *_sparc_alloc_io(unsigned int busno, unsigned long phys,
@@ -246,63 +233,19 @@ static void _sparc_free_io(struct resource *res)
 
 #ifdef CONFIG_SBUS
 
-void sbus_set_sbus64(struct sbus_dev *sdev, int x)
+void sbus_set_sbus64(struct device *dev, int x)
 {
 	printk("sbus_set_sbus64: unsupported\n");
 }
 
-extern unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq);
-void __init sbus_fill_device_irq(struct sbus_dev *sdev)
-{
-	struct linux_prom_irqs irqs[PROMINTR_MAX];
-	int len;
-
-	len = prom_getproperty(sdev->prom_node, "intr",
-			       (char *)irqs, sizeof(irqs));
-	if (len != -1) {
-		sdev->num_irqs = len / 8;
-		if (sdev->num_irqs == 0) {
-			sdev->irqs[0] = 0;
-		} else if (sparc_cpu_model == sun4d) {
-			for (len = 0; len < sdev->num_irqs; len++)
-				sdev->irqs[len] =
-					sun4d_build_irq(sdev, irqs[len].pri);
-		} else {
-			for (len = 0; len < sdev->num_irqs; len++)
-				sdev->irqs[len] = irqs[len].pri;
-		}
-	} else {
-		int interrupts[PROMINTR_MAX];
-
-		/* No "intr" node found-- check for "interrupts" node.
-		 * This node contains SBus interrupt levels, not IPLs
-		 * as in "intr", and no vector values.  We convert
-		 * SBus interrupt levels to PILs (platform specific).
-		 */
-		len = prom_getproperty(sdev->prom_node, "interrupts",
-				       (char *)interrupts, sizeof(interrupts));
-		if (len == -1) {
-			sdev->irqs[0] = 0;
-			sdev->num_irqs = 0;
-		} else {
-			sdev->num_irqs = len / sizeof(int);
-			for (len = 0; len < sdev->num_irqs; len++) {
-				sdev->irqs[len] =
-					sbint_to_irq(sdev, interrupts[len]);
-			}
-		}
-	} 
-}
-
 /*
  * Allocate a chunk of memory suitable for DMA.
  * Typically devices use them for control blocks.
  * CPU may access them without any explicit flushing.
- *
- * XXX Some clever people know that sdev is not used and supply NULL. Watch.
  */
-void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp)
+void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp)
 {
+	struct of_device *op = to_of_device(dev);
 	unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
 	unsigned long va;
 	struct resource *res;
@@ -336,13 +279,10 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp)
 	 * XXX That's where sdev would be used. Currently we load
 	 * all iommu tables with the same translations.
 	 */
-	if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0)
+	if (mmu_map_dma_area(dev, dma_addrp, va, res->start, len_total) != 0)
 		goto err_noiommu;
 
-	/* Set the resource name, if known. */
-	if (sdev) {
-		res->name = sdev->prom_name;
-	}
+	res->name = op->node->name;
 
 	return (void *)(unsigned long)res->start;
 
@@ -356,7 +296,7 @@ err_nopages:
 	return NULL;
 }
 
-void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba)
+void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
 {
 	struct resource *res;
 	struct page *pgv;
@@ -383,8 +323,8 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba)
 	kfree(res);
 
 	/* mmu_inval_dma_area(va, n); */ /* it's consistent, isn't it */
-	pgv = mmu_translate_dvma(ba);
-	mmu_unmap_dma_area(ba, n);
+	pgv = virt_to_page(p);
+	mmu_unmap_dma_area(dev, ba, n);
 
 	__free_pages(pgv, get_order(n));
 }
@@ -394,7 +334,7 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba)
  * CPU view of this memory may be inconsistent with
  * a device view and explicit flushing is necessary.
  */
-dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int direction)
+dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int direction)
 {
 	/* XXX why are some lengths signed, others unsigned? */
 	if (len <= 0) {
@@ -404,17 +344,17 @@ dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int dire
 	if (len > 256*1024) {			/* __get_free_pages() limit */
 		return 0;
 	}
-	return mmu_get_scsi_one(va, len, sdev->bus);
+	return mmu_get_scsi_one(dev, va, len);
 }
 
-void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t ba, size_t n, int direction)
+void sbus_unmap_single(struct device *dev, dma_addr_t ba, size_t n, int direction)
 {
-	mmu_release_scsi_one(ba, n, sdev->bus);
+	mmu_release_scsi_one(dev, ba, n);
 }
 
-int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
 {
-	mmu_get_scsi_sgl(sg, n, sdev->bus);
+	mmu_get_scsi_sgl(dev, sg, n);
 
 	/*
 	 * XXX sparc64 can return a partial length here. sun4c should do this
@@ -423,145 +363,28 @@ int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direct
 	return n;
 }
 
-void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
-{
-	mmu_release_scsi_sgl(sg, n, sdev->bus);
-}
-
-/*
- */
-void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction)
-{
-#if 0
-	unsigned long va;
-	struct resource *res;
-
-	/* We do not need the resource, just print a message if invalid. */
-	res = _sparc_find_resource(&_sparc_dvma, ba);
-	if (res == NULL)
-		panic("sbus_dma_sync_single: 0x%x\n", ba);
-
-	va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */
-	/*
-	 * XXX This bogosity will be fixed with the iommu rewrite coming soon
-	 * to a kernel near you. - Anton
-	 */
-	/* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */
-#endif
-}
-
-void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction)
+void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
 {
-#if 0
-	unsigned long va;
-	struct resource *res;
-
-	/* We do not need the resource, just print a message if invalid. */
-	res = _sparc_find_resource(&_sparc_dvma, ba);
-	if (res == NULL)
-		panic("sbus_dma_sync_single: 0x%x\n", ba);
-
-	va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */
-	/*
-	 * XXX This bogosity will be fixed with the iommu rewrite coming soon
-	 * to a kernel near you. - Anton
-	 */
-	/* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */
-#endif
+	mmu_release_scsi_sgl(dev, sg, n);
 }
 
-void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, size_t size, int direction)
 {
-	printk("sbus_dma_sync_sg_for_cpu: not implemented yet\n");
 }
 
-void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t size, int direction)
 {
-	printk("sbus_dma_sync_sg_for_device: not implemented yet\n");
-}
-
-/* Support code for sbus_init().  */
-/*
- * XXX This functions appears to be a distorted version of
- * prom_sbus_ranges_init(), with all sun4d stuff cut away.
- * Ask DaveM what is going on here, how is sun4d supposed to work... XXX
- */
-/* added back sun4d patch from Thomas Bogendoerfer - should be OK (crn) */
-void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus)
-{
-	int parent_node = pn->node;
-
-	if (sparc_cpu_model == sun4d) {
-		struct linux_prom_ranges iounit_ranges[PROMREG_MAX];
-		int num_iounit_ranges, len;
-
-		len = prom_getproperty(parent_node, "ranges",
-				       (char *) iounit_ranges,
-				       sizeof (iounit_ranges));
-		if (len != -1) {
-			num_iounit_ranges =
-				(len / sizeof(struct linux_prom_ranges));
-			prom_adjust_ranges(sbus->sbus_ranges,
-					   sbus->num_sbus_ranges,
-					   iounit_ranges, num_iounit_ranges);
-		}
-	}
 }
 
-void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp)
-{
-#ifndef CONFIG_SUN4
-	struct device_node *parent = dp->parent;
-
-	if (sparc_cpu_model != sun4d &&
-	    parent != NULL &&
-	    !strcmp(parent->name, "iommu")) {
-		extern void iommu_init(int iommu_node, struct sbus_bus *sbus);
-
-		iommu_init(parent->node, sbus);
-	}
-
-	if (sparc_cpu_model == sun4d) {
-		extern void iounit_init(int sbi_node, int iounit_node,
-					struct sbus_bus *sbus);
-
-		iounit_init(dp->node, parent->node, sbus);
-	}
-#endif
-}
-
-void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp)
-{
-	if (sparc_cpu_model == sun4d) {
-		struct device_node *parent = dp->parent;
-
-		sbus->devid = of_getintprop_default(parent, "device-id", 0);
-		sbus->board = of_getintprop_default(parent, "board#", 0);
-	}
-}
-
-int __init sbus_arch_preinit(void)
+static int __init sparc_register_ioport(void)
 {
 	register_proc_sparc_ioport();
 
-#ifdef CONFIG_SUN4
-	{
-		extern void sun4_dvma_init(void);
-		sun4_dvma_init();
-	}
-	return 1;
-#else
 	return 0;
-#endif
 }
 
-void __init sbus_arch_postinit(void)
-{
-	if (sparc_cpu_model == sun4d) {
-		extern void sun4d_init_sbi_irq(void);
-		sun4d_init_sbi_irq();
-	}
-}
+arch_initcall(sparc_register_ioport);
+
 #endif /* CONFIG_SBUS */
 
 #ifdef CONFIG_PCI
diff --git a/arch/sparc/kernel/irq.h b/arch/sparc/kernel/irq.h
index 32ef3eb..db75138 100644
--- a/arch/sparc/kernel/irq.h
+++ b/arch/sparc/kernel/irq.h
@@ -13,7 +13,6 @@ BTFIXUPDEF_CALL(void, enable_irq, unsigned int)
 BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
 BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
 BTFIXUPDEF_CALL(void, clear_clock_irq, void)
-BTFIXUPDEF_CALL(void, clear_profile_irq, int)
 BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
 
 static inline void __disable_irq(unsigned int irq)
@@ -41,11 +40,6 @@ static inline void clear_clock_irq(void)
 	BTFIXUP_CALL(clear_clock_irq)();
 }
 
-static inline void clear_profile_irq(int irq)
-{
-	BTFIXUP_CALL(clear_profile_irq)(irq);
-}
-
 static inline void load_profile_irq(int cpu, int limit)
 {
 	BTFIXUP_CALL(load_profile_irq)(cpu, limit);
diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c
index f58c537..0837bd52e 100644
--- a/arch/sparc/kernel/of_device.c
+++ b/arch/sparc/kernel/of_device.c
@@ -29,15 +29,38 @@ struct of_device *of_find_device_by_node(struct device_node *dp)
 }
 EXPORT_SYMBOL(of_find_device_by_node);
 
-#ifdef CONFIG_PCI
-struct bus_type ebus_bus_type;
-EXPORT_SYMBOL(ebus_bus_type);
-#endif
+unsigned int irq_of_parse_and_map(struct device_node *node, int index)
+{
+	struct of_device *op = of_find_device_by_node(node);
+
+	if (!op || index >= op->num_irqs)
+		return 0;
+
+	return op->irqs[index];
+}
+EXPORT_SYMBOL(irq_of_parse_and_map);
+
+/* Take the archdata values for IOMMU, STC, and HOSTDATA found in
+ * BUS and propagate to all child of_device objects.
+ */
+void of_propagate_archdata(struct of_device *bus)
+{
+	struct dev_archdata *bus_sd = &bus->dev.archdata;
+	struct device_node *bus_dp = bus->node;
+	struct device_node *dp;
+
+	for (dp = bus_dp->child; dp; dp = dp->sibling) {
+		struct of_device *op = of_find_device_by_node(dp);
 
-#ifdef CONFIG_SBUS
-struct bus_type sbus_bus_type;
-EXPORT_SYMBOL(sbus_bus_type);
-#endif
+		op->dev.archdata.iommu = bus_sd->iommu;
+		op->dev.archdata.stc = bus_sd->stc;
+		op->dev.archdata.host_controller = bus_sd->host_controller;
+		op->dev.archdata.numa_node = bus_sd->numa_node;
+
+		if (dp->child)
+			of_propagate_archdata(op);
+	}
+}
 
 struct bus_type of_platform_bus_type;
 EXPORT_SYMBOL(of_platform_bus_type);
@@ -327,6 +350,27 @@ static int __init build_one_resource(struct device_node *parent,
 	return 1;
 }
 
+static int __init use_1to1_mapping(struct device_node *pp)
+{
+	/* If we have a ranges property in the parent, use it.  */
+	if (of_find_property(pp, "ranges", NULL) != NULL)
+		return 0;
+
+	/* Some SBUS devices use intermediate nodes to express
+	 * hierarchy within the device itself.  These aren't
+	 * real bus nodes, and don't have a 'ranges' property.
+	 * But, we should still pass the translation work up
+	 * to the SBUS itself.
+	 */
+	if (!strcmp(pp->name, "dma") ||
+	    !strcmp(pp->name, "espdma") ||
+	    !strcmp(pp->name, "ledma") ||
+	    !strcmp(pp->name, "lebuffer"))
+		return 0;
+
+	return 1;
+}
+
 static int of_resource_verbose;
 
 static void __init build_device_resources(struct of_device *op,
@@ -373,10 +417,7 @@ static void __init build_device_resources(struct of_device *op,
 
 		flags = bus->get_flags(reg, 0);
 
-		/* If the immediate parent has no ranges property to apply,
-		 * just use a 1<->1 mapping.
-		 */
-		if (of_find_property(pp, "ranges", NULL) == NULL) {
+		if (use_1to1_mapping(pp)) {
 			result = of_read_addr(addr, na);
 			goto build_res;
 		}
@@ -565,15 +606,6 @@ static int __init of_bus_driver_init(void)
 	int err;
 
 	err = of_bus_type_init(&of_platform_bus_type, "of");
-#ifdef CONFIG_PCI
-	if (!err)
-		err = of_bus_type_init(&ebus_bus_type, "ebus");
-#endif
-#ifdef CONFIG_SBUS
-	if (!err)
-		err = of_bus_type_init(&sbus_bus_type, "sbus");
-#endif
-
 	if (!err)
 		scan_of_devices();
 
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index a6a6f98..462584e 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -17,8 +17,6 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 
-#include <asm/ebus.h>
-#include <asm/sbus.h> /* for sanity check... */
 #include <asm/swift.h> /* for cache flushing. */
 #include <asm/io.h>
 
@@ -430,7 +428,6 @@ static int __init pcic_init(void)
 
 	pcic_pbm_scan_bus(pcic);
 
-	ebus_init();
 	return 0;
 }
 
@@ -493,10 +490,6 @@ static void pcic_map_pci_device(struct linux_pcic *pcic,
 				 * do ioremap() before accessing PC-style I/O,
 				 * we supply virtual, ready to access address.
 				 *
-				 * Ebus devices do not come here even if
-				 * CheerIO makes a similar conversion.
-				 * See ebus.c for details.
-				 *
 				 * Note that request_region()
 				 * works for these devices.
 				 *
@@ -677,7 +670,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 }
 
 /*
- * pcic_pin_to_irq() is exported to ebus.c.
+ * pcic_pin_to_irq() is exported to bus probing code
  */
 unsigned int
 pcic_pin_to_irq(unsigned int pin, const char *name)
@@ -904,11 +897,6 @@ static void pcic_enable_irq(unsigned int irq_nr)
 	local_irq_restore(flags);
 }
 
-static void pcic_clear_profile_irq(int cpu)
-{
-	printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
-}
-
 static void pcic_load_profile_irq(int cpu, unsigned int limit)
 {
 	printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
@@ -934,7 +922,6 @@ void __init sun4m_pci_init_IRQ(void)
 	BTFIXUPSET_CALL(enable_pil_irq, pcic_enable_pil_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_pil_irq, pcic_disable_pil_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(clear_profile_irq, pcic_clear_profile_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM);
 }
 
diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c
index 7eca887..2afcfab 100644
--- a/arch/sparc/kernel/pmc.c
+++ b/arch/sparc/kernel/pmc.c
@@ -8,11 +8,11 @@
 #include <linux/fs.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/miscdevice.h>
 #include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
-#include <asm/sbus.h>
 #include <asm/oplib.h>
 #include <asm/uaccess.h>
 #include <asm/auxio.h>
@@ -23,17 +23,15 @@
  * #define PMC_NO_IDLE
  */
 
-#define PMC_MINOR	MISC_DYNAMIC_MINOR
 #define PMC_OBPNAME	"SUNW,pmc"
 #define PMC_DEVNAME "pmc"
 
 #define PMC_IDLE_REG	0x00
 #define PMC_IDLE_ON		0x01
 
-volatile static u8 __iomem *regs; 
-static int pmc_regsize;
+static u8 __iomem *regs;
 
-#define pmc_readb(offs)			(sbus_readb(regs+offs))
+#define pmc_readb(offs)		(sbus_readb(regs+offs))
 #define pmc_writeb(val, offs) 	(sbus_writeb(val, regs+offs))
 
 /* 
@@ -53,31 +51,11 @@ void pmc_swift_idle(void)
 #endif
 } 
 
-static inline void pmc_free(void)
+static int __devinit pmc_probe(struct of_device *op,
+			       const struct of_device_id *match)
 {
-	sbus_iounmap(regs, pmc_regsize);
-}
-
-static int __init pmc_probe(void)
-{
-	struct sbus_bus *sbus = NULL;
-	struct sbus_dev *sdev = NULL;
-	for_each_sbus(sbus) {
-		for_each_sbusdev(sdev, sbus) {
-			if (!strcmp(sdev->prom_name, PMC_OBPNAME)) {
-				goto sbus_done;
-			}
-		}
-	}
-
-sbus_done:
-	if (!sdev) {
-		return -ENODEV;
-	}
-
-	pmc_regsize = sdev->reg_addrs[0].reg_size;
-	regs = sbus_ioremap(&sdev->resource[0], 0, 
-				   pmc_regsize, PMC_OBPNAME);
+	regs = of_ioremap(&op->resource[0], 0,
+			  resource_size(&op->resource[0]), PMC_OBPNAME);
 	if (!regs) {
 		printk(KERN_ERR "%s: unable to map registers\n", PMC_DEVNAME);
 		return -ENODEV;
@@ -92,8 +70,27 @@ sbus_done:
 	return 0;
 }
 
+static struct of_device_id __initdata pmc_match[] = {
+	{
+		.name = PMC_OBPNAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, pmc_match);
+
+static struct of_platform_driver pmc_driver = {
+	.name		= "pmc",
+	.match_table	= pmc_match,
+	.probe		= pmc_probe,
+};
+
+static int __init pmc_init(void)
+{
+	return of_register_driver(&pmc_driver, &of_bus_type);
+}
+
 /* This driver is not critical to the boot process
  * and is easiest to ioremap when SBus is already
  * initialized, so we install ourselves thusly:
  */
-__initcall(pmc_probe);
+__initcall(pmc_init);
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index 4bb4309..e8c43ff 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -75,7 +75,7 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	for (;;) {
-		if (ARCH_SUN4C_SUN4) {
+		if (ARCH_SUN4C) {
 			static int count = HZ;
 			static unsigned long last_jiffies;
 			static unsigned long last_faults;
diff --git a/arch/sparc/kernel/prom.c b/arch/sparc/kernel/prom.c
index cd4fb79a..eee5efc 100644
--- a/arch/sparc/kernel/prom.c
+++ b/arch/sparc/kernel/prom.c
@@ -54,6 +54,9 @@ int of_getintprop_default(struct device_node *np, const char *name, int def)
 }
 EXPORT_SYMBOL(of_getintprop_default);
 
+DEFINE_MUTEX(of_set_property_mutex);
+EXPORT_SYMBOL(of_set_property_mutex);
+
 int of_set_property(struct device_node *dp, const char *name, void *val, int len)
 {
 	struct property **prevp;
@@ -77,7 +80,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 			void *old_val = prop->value;
 			int ret;
 
+			mutex_lock(&of_set_property_mutex);
 			ret = prom_setprop(dp->node, (char *) name, val, len);
+			mutex_unlock(&of_set_property_mutex);
+
 			err = -EINVAL;
 			if (ret >= 0) {
 				prop->value = new_val;
@@ -436,7 +442,6 @@ static void __init of_console_init(void)
 
 	switch (prom_vers) {
 	case PROM_V0:
-	case PROM_SUN4:
 		skip = 0;
 		switch (*romvec->pv_stdout) {
 		case PROMDEV_SCREEN:
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index 9e451b2..24fe307 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -213,23 +213,25 @@ void __init setup_arch(char **cmdline_p)
 	/* Initialize PROM console and command line. */
 	*cmdline_p = prom_getbootargs();
 	strcpy(boot_command_line, *cmdline_p);
+	parse_early_param();
 
 	/* Set sparc_cpu_model */
 	sparc_cpu_model = sun_unknown;
-	if(!strcmp(&cputypval,"sun4 ")) { sparc_cpu_model=sun4; }
-	if(!strcmp(&cputypval,"sun4c")) { sparc_cpu_model=sun4c; }
-	if(!strcmp(&cputypval,"sun4m")) { sparc_cpu_model=sun4m; }
-	if(!strcmp(&cputypval,"sun4s")) { sparc_cpu_model=sun4m; }  /* CP-1200 with PROM 2.30 -E */
-	if(!strcmp(&cputypval,"sun4d")) { sparc_cpu_model=sun4d; }
-	if(!strcmp(&cputypval,"sun4e")) { sparc_cpu_model=sun4e; }
-	if(!strcmp(&cputypval,"sun4u")) { sparc_cpu_model=sun4u; }
-
-#ifdef CONFIG_SUN4
-	if (sparc_cpu_model != sun4) {
-		prom_printf("This kernel is for Sun4 architecture only.\n");
-		prom_halt();
-	}
-#endif
+	if (!strcmp(&cputypval,"sun4 "))
+		sparc_cpu_model = sun4;
+	if (!strcmp(&cputypval,"sun4c"))
+		sparc_cpu_model = sun4c;
+	if (!strcmp(&cputypval,"sun4m"))
+		sparc_cpu_model = sun4m;
+	if (!strcmp(&cputypval,"sun4s"))
+		sparc_cpu_model = sun4m; /* CP-1200 with PROM 2.30 -E */
+	if (!strcmp(&cputypval,"sun4d"))
+		sparc_cpu_model = sun4d;
+	if (!strcmp(&cputypval,"sun4e"))
+		sparc_cpu_model = sun4e;
+	if (!strcmp(&cputypval,"sun4u"))
+		sparc_cpu_model = sun4u;
+
 	printk("ARCH: ");
 	switch(sparc_cpu_model) {
 	case sun4:
@@ -263,7 +265,7 @@ void __init setup_arch(char **cmdline_p)
 	boot_flags_init(*cmdline_p);
 
 	idprom_init();
-	if (ARCH_SUN4C_SUN4)
+	if (ARCH_SUN4C)
 		sun4c_probe_vac();
 	load_mmu();
 
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index b23cea5..b0dfff8 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -38,17 +38,12 @@
 #include <asm/idprom.h>
 #include <asm/head.h>
 #include <asm/smp.h>
-#include <asm/mostek.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
 #ifdef CONFIG_SBUS
-#include <asm/sbus.h>
 #include <asm/dma.h>
 #endif
-#ifdef CONFIG_PCI
-#include <asm/ebus.h>
-#endif
 #include <asm/io-unit.h>
 #include <asm/bug.h>
 
@@ -127,16 +122,11 @@ EXPORT_SYMBOL(phys_cpu_present_map);
 EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
 EXPORT_SYMBOL(rtc_lock);
-EXPORT_SYMBOL(mostek_lock);
-EXPORT_SYMBOL(mstk48t02_regs);
 #ifdef CONFIG_SUN_AUXIO
 EXPORT_SYMBOL(set_auxio);
 EXPORT_SYMBOL(get_auxio);
 #endif
 EXPORT_SYMBOL(io_remap_pfn_range);
-  /* P3: iounit_xxx may be needed, sun4d users */
-/* EXPORT_SYMBOL(iounit_map_dma_init); */
-/* EXPORT_SYMBOL(iounit_map_dma_page); */
 
 #ifndef CONFIG_SMP
 EXPORT_SYMBOL(BTFIXUP_CALL(___xchg32));
@@ -153,24 +143,9 @@ EXPORT_SYMBOL(BTFIXUP_CALL(mmu_release_scsi_one));
 EXPORT_SYMBOL(BTFIXUP_CALL(pgprot_noncached));
 
 #ifdef CONFIG_SBUS
-EXPORT_SYMBOL(sbus_root);
-EXPORT_SYMBOL(dma_chain);
 EXPORT_SYMBOL(sbus_set_sbus64);
-EXPORT_SYMBOL(sbus_alloc_consistent);
-EXPORT_SYMBOL(sbus_free_consistent);
-EXPORT_SYMBOL(sbus_map_single);
-EXPORT_SYMBOL(sbus_unmap_single);
-EXPORT_SYMBOL(sbus_map_sg);
-EXPORT_SYMBOL(sbus_unmap_sg);
-EXPORT_SYMBOL(sbus_dma_sync_single_for_cpu);
-EXPORT_SYMBOL(sbus_dma_sync_single_for_device);
-EXPORT_SYMBOL(sbus_dma_sync_sg_for_cpu);
-EXPORT_SYMBOL(sbus_dma_sync_sg_for_device);
-EXPORT_SYMBOL(sbus_iounmap);
-EXPORT_SYMBOL(sbus_ioremap);
 #endif
 #ifdef CONFIG_PCI
-EXPORT_SYMBOL(ebus_chain);
 EXPORT_SYMBOL(insb);
 EXPORT_SYMBOL(outsb);
 EXPORT_SYMBOL(insw);
diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c
index 340fc39..5dc8a57 100644
--- a/arch/sparc/kernel/sun4c_irq.c
+++ b/arch/sparc/kernel/sun4c_irq.c
@@ -18,6 +18,8 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include "irq.h"
 
 #include <asm/ptrace.h>
@@ -31,15 +33,8 @@
 #include <asm/traps.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/sun4paddr.h>
 #include <asm/idprom.h>
 #include <asm/machines.h>
-#include <asm/sbus.h>
-
-#if 0
-static struct resource sun4c_timer_eb = { "sun4c_timer" };
-static struct resource sun4c_intr_eb = { "sun4c_intr" };
-#endif
 
 /*
  * Bit field defines for the interrupt registers on various
@@ -64,19 +59,7 @@ static struct resource sun4c_intr_eb = { "sun4c_intr" };
  *
  * so don't go making it static, like I tried. sigh.
  */
-unsigned char *interrupt_enable = NULL;
-
-static int sun4c_pil_map[] = { 0, 1, 2, 3, 5, 7, 8, 9 };
-
-static unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev,
-				       unsigned int sbint)
-{
-	if (sbint >= sizeof(sun4c_pil_map)) {
-		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
-		BUG();
-	}
-	return sun4c_pil_map[sbint];
-}
+unsigned char __iomem *interrupt_enable = NULL;
 
 static void sun4c_disable_irq(unsigned int irq_nr)
 {
@@ -85,7 +68,7 @@ static void sun4c_disable_irq(unsigned int irq_nr)
     
 	local_irq_save(flags);
 	irq_nr &= (NR_IRQS - 1);
-	current_mask = *interrupt_enable;
+	current_mask = sbus_readb(interrupt_enable);
 	switch(irq_nr) {
 	case 1:
 		new_mask = ((current_mask) & (~(SUN4C_INT_E1)));
@@ -103,7 +86,7 @@ static void sun4c_disable_irq(unsigned int irq_nr)
 		local_irq_restore(flags);
 		return;
 	}
-	*interrupt_enable = new_mask;
+	sbus_writeb(new_mask, interrupt_enable);
 	local_irq_restore(flags);
 }
 
@@ -114,7 +97,7 @@ static void sun4c_enable_irq(unsigned int irq_nr)
     
 	local_irq_save(flags);
 	irq_nr &= (NR_IRQS - 1);
-	current_mask = *interrupt_enable;
+	current_mask = sbus_readb(interrupt_enable);
 	switch(irq_nr) {
 	case 1:
 		new_mask = ((current_mask) | SUN4C_INT_E1);
@@ -132,37 +115,22 @@ static void sun4c_enable_irq(unsigned int irq_nr)
 		local_irq_restore(flags);
 		return;
 	}
-	*interrupt_enable = new_mask;
+	sbus_writeb(new_mask, interrupt_enable);
 	local_irq_restore(flags);
 }
 
-#define TIMER_IRQ  	10    /* Also at level 14, but we ignore that one. */
-#define PROFILE_IRQ	14    /* Level14 ticker.. used by OBP for polling */
-
-volatile struct sun4c_timer_info *sun4c_timers;
+struct sun4c_timer_info {
+	u32		l10_count;
+	u32		l10_limit;
+	u32		l14_count;
+	u32		l14_limit;
+};
 
-#ifdef CONFIG_SUN4
-/* This is an ugly hack to work around the
-   current timer code, and make it work with 
-   the sun4/260 intersil 
-   */
-volatile struct sun4c_timer_info sun4_timer;
-#endif
+static struct sun4c_timer_info __iomem *sun4c_timers;
 
 static void sun4c_clear_clock_irq(void)
 {
-	volatile unsigned int clear_intr;
-#ifdef CONFIG_SUN4
-	if (idprom->id_machtype == (SM_SUN4 | SM_4_260)) 
-	  clear_intr = sun4_timer.timer_limit10;
-	else
-#endif
-	clear_intr = sun4c_timers->timer_limit10;
-}
-
-static void sun4c_clear_profile_irq(int cpu)
-{
-	/* Errm.. not sure how to do this.. */
+	sbus_readl(&sun4c_timers->l10_limit);
 }
 
 static void sun4c_load_profile_irq(int cpu, unsigned int limit)
@@ -172,41 +140,48 @@ static void sun4c_load_profile_irq(int cpu, unsigned int limit)
 
 static void __init sun4c_init_timers(irq_handler_t counter_fn)
 {
-	int irq;
+	const struct linux_prom_irqs *irq;
+	struct device_node *dp;
+	const u32 *addr;
+	int err;
+
+	dp = of_find_node_by_name(NULL, "counter-timer");
+	if (!dp) {
+		prom_printf("sun4c_init_timers: Unable to find counter-timer\n");
+		prom_halt();
+	}
 
-	/* Map the Timer chip, this is implemented in hardware inside
-	 * the cache chip on the sun4c.
-	 */
-#ifdef CONFIG_SUN4
-	if (idprom->id_machtype == (SM_SUN4 | SM_4_260))
-		sun4c_timers = &sun4_timer;
-	else
-#endif
-	sun4c_timers = ioremap(SUN_TIMER_PHYSADDR,
-	    sizeof(struct sun4c_timer_info));
+	addr = of_get_property(dp, "address", NULL);
+	if (!addr) {
+		prom_printf("sun4c_init_timers: No address property\n");
+		prom_halt();
+	}
+
+	sun4c_timers = (void __iomem *) (unsigned long) addr[0];
+
+	irq = of_get_property(dp, "intr", NULL);
+	if (!irq) {
+		prom_printf("sun4c_init_timers: No intr property\n");
+		prom_halt();
+	}
 
 	/* Have the level 10 timer tick at 100HZ.  We don't touch the
 	 * level 14 timer limit since we are letting the prom handle
 	 * them until we have a real console driver so L1-A works.
 	 */
-	sun4c_timers->timer_limit10 = (((1000000/HZ) + 1) << 10);
-	master_l10_counter = &sun4c_timers->cur_count10;
-	master_l10_limit = &sun4c_timers->timer_limit10;
+	sbus_writel((((1000000/HZ) + 1) << 10), &sun4c_timers->l10_limit);
 
-	irq = request_irq(TIMER_IRQ,
-			  counter_fn,
+	master_l10_counter = &sun4c_timers->l10_count;
+
+	err = request_irq(irq[0].pri, counter_fn,
 			  (IRQF_DISABLED | SA_STATIC_ALLOC),
 			  "timer", NULL);
-	if (irq) {
-		prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
+	if (err) {
+		prom_printf("sun4c_init_timers: request_irq() fails with %d\n", err);
 		prom_halt();
 	}
     
-#if 0
-	/* This does not work on 4/330 */
-	sun4c_enable_irq(10);
-#endif
-	claim_ticker14(NULL, PROFILE_IRQ, 0);
+	sun4c_disable_irq(irq[1].pri);
 }
 
 #ifdef CONFIG_SMP
@@ -215,41 +190,28 @@ static void sun4c_nop(void) {}
 
 void __init sun4c_init_IRQ(void)
 {
-	struct linux_prom_registers int_regs[2];
-	int ie_node;
+	struct device_node *dp;
+	const u32 *addr;
 
-	if (ARCH_SUN4) {
-		interrupt_enable = (char *)
-		    ioremap(sun4_ie_physaddr, PAGE_SIZE);
-	} else {
-		struct resource phyres;
-
-		ie_node = prom_searchsiblings (prom_getchild(prom_root_node),
-				       	"interrupt-enable");
-		if(ie_node == 0)
-			panic("Cannot find /interrupt-enable node");
+	dp = of_find_node_by_name(NULL, "interrupt-enable");
+	if (!dp) {
+		prom_printf("sun4c_init_IRQ: Unable to find interrupt-enable\n");
+		prom_halt();
+	}
 
-		/* Depending on the "address" property is bad news... */
-		interrupt_enable = NULL;
-		if (prom_getproperty(ie_node, "reg", (char *) int_regs,
-				     sizeof(int_regs)) != -1) {
-			memset(&phyres, 0, sizeof(struct resource));
-			phyres.flags = int_regs[0].which_io;
-			phyres.start = int_regs[0].phys_addr;
-			interrupt_enable = (char *) sbus_ioremap(&phyres, 0,
-			    int_regs[0].reg_size, "sun4c_intr");
-		}
+	addr = of_get_property(dp, "address", NULL);
+	if (!addr) {
+		prom_printf("sun4c_init_IRQ: No address property\n");
+		prom_halt();
 	}
-	if (!interrupt_enable)
-		panic("Cannot map interrupt_enable");
 
-	BTFIXUPSET_CALL(sbint_to_irq, sun4c_sbint_to_irq, BTFIXUPCALL_NORM);
+	interrupt_enable = (void __iomem *) (unsigned long) addr[0];
+
 	BTFIXUPSET_CALL(enable_irq, sun4c_enable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_irq, sun4c_disable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(enable_pil_irq, sun4c_enable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_pil_irq, sun4c_disable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_clock_irq, sun4c_clear_clock_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(clear_profile_irq, sun4c_clear_profile_irq, BTFIXUPCALL_NOP);
 	BTFIXUPSET_CALL(load_profile_irq, sun4c_load_profile_irq, BTFIXUPCALL_NOP);
 	sparc_init_timers = sun4c_init_timers;
 #ifdef CONFIG_SMP
@@ -257,6 +219,6 @@ void __init sun4c_init_IRQ(void)
 	BTFIXUPSET_CALL(clear_cpu_int, sun4c_nop, BTFIXUPCALL_NOP);
 	BTFIXUPSET_CALL(set_irq_udt, sun4c_nop, BTFIXUPCALL_NOP);
 #endif
-	*interrupt_enable = (SUN4C_INT_ENABLE);
+	sbus_writeb(SUN4C_INT_ENABLE, interrupt_enable);
 	/* Cannot enable interrupts until OBP ticker is disabled. */
 }
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index 1290b59..d3cb76c 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -19,6 +19,8 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/seq_file.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/ptrace.h>
 #include <asm/processor.h>
@@ -34,7 +36,6 @@
 #include <asm/io.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
-#include <asm/sbus.h>
 #include <asm/sbi.h>
 #include <asm/cacheflush.h>
 #include <asm/irq_regs.h>
@@ -44,16 +45,22 @@
 /* If you trust current SCSI layer to handle different SCSI IRQs, enable this. I don't trust it... -jj */
 /* #define DISTRIBUTE_IRQS */
 
-struct sun4d_timer_regs *sun4d_timers;
+struct sun4d_timer_regs {
+	u32	l10_timer_limit;
+	u32	l10_cur_countx;
+	u32	l10_limit_noclear;
+	u32	ctrl;
+	u32	l10_cur_count;
+};
+
+static struct sun4d_timer_regs __iomem *sun4d_timers;
+
 #define TIMER_IRQ	10
 
 #define MAX_STATIC_ALLOC	4
 extern struct irqaction static_irqaction[MAX_STATIC_ALLOC];
 extern int static_irq_count;
-unsigned char cpu_leds[32];
-#ifdef CONFIG_SMP
 static unsigned char sbus_tid[32];
-#endif
 
 static struct irqaction *irq_action[NR_IRQS];
 extern spinlock_t irq_action_lock;
@@ -72,9 +79,9 @@ static int sbus_to_pil[] = {
 };
 
 static int nsbi;
-#ifdef CONFIG_SMP
+
+/* Exported for sun4d_smp.c */
 DEFINE_SPINLOCK(sun4d_imsk_lock);
-#endif
 
 int show_sun4d_interrupts(struct seq_file *p, void *v)
 {
@@ -257,26 +264,6 @@ void sun4d_handler_irq(int irq, struct pt_regs * regs)
 	set_irq_regs(old_regs);
 }
 
-unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq)
-{
-	int sbusl = pil_to_sbus[irq];
-
-	if (sbusl)
-		return ((sdev->bus->board + 1) << 5) + (sbusl << 2) + sdev->slot;
-	else
-		return irq;
-}
-
-static unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev,
-				       unsigned int sbint)
-{
-	if (sbint >= sizeof(sbus_to_pil)) {
-		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
-		BUG();
-	}
-	return sun4d_build_irq(sdev, sbus_to_pil[sbint]);
-}
-
 int sun4d_request_irq(unsigned int irq,
 		irq_handler_t handler,
 		unsigned long irqflags, const char * devname, void *dev_id)
@@ -360,36 +347,28 @@ out:
 
 static void sun4d_disable_irq(unsigned int irq)
 {
-#ifdef CONFIG_SMP
 	int tid = sbus_tid[(irq >> 5) - 1];
 	unsigned long flags;
-#endif	
 	
-	if (irq < NR_IRQS) return;
-#ifdef CONFIG_SMP
+	if (irq < NR_IRQS)
+		return;
+
 	spin_lock_irqsave(&sun4d_imsk_lock, flags);
 	cc_set_imsk_other(tid, cc_get_imsk_other(tid) | (1 << sbus_to_pil[(irq >> 2) & 7]));
 	spin_unlock_irqrestore(&sun4d_imsk_lock, flags);
-#else		
-	cc_set_imsk(cc_get_imsk() | (1 << sbus_to_pil[(irq >> 2) & 7]));
-#endif
 }
 
 static void sun4d_enable_irq(unsigned int irq)
 {
-#ifdef CONFIG_SMP
 	int tid = sbus_tid[(irq >> 5) - 1];
 	unsigned long flags;
-#endif	
 	
-	if (irq < NR_IRQS) return;
-#ifdef CONFIG_SMP
+	if (irq < NR_IRQS)
+		return;
+
 	spin_lock_irqsave(&sun4d_imsk_lock, flags);
 	cc_set_imsk_other(tid, cc_get_imsk_other(tid) & ~(1 << sbus_to_pil[(irq >> 2) & 7]));
 	spin_unlock_irqrestore(&sun4d_imsk_lock, flags);
-#else		
-	cc_set_imsk(cc_get_imsk() & ~(1 << sbus_to_pil[(irq >> 2) & 7]));
-#endif
 }
 
 #ifdef CONFIG_SMP
@@ -409,47 +388,55 @@ static void sun4d_set_udt(int cpu)
 /* Setup IRQ distribution scheme. */
 void __init sun4d_distribute_irqs(void)
 {
+	struct device_node *dp;
+
 #ifdef DISTRIBUTE_IRQS
-	struct sbus_bus *sbus;
-	unsigned long sbus_serving_map;
+	cpumask_t sbus_serving_map;
 
 	sbus_serving_map = cpu_present_map;
-	for_each_sbus(sbus) {
-		if ((sbus->board * 2) == boot_cpu_id && (cpu_present_map & (1 << (sbus->board * 2 + 1))))
-			sbus_tid[sbus->board] = (sbus->board * 2 + 1);
-		else if (cpu_present_map & (1 << (sbus->board * 2)))
-			sbus_tid[sbus->board] = (sbus->board * 2);
-		else if (cpu_present_map & (1 << (sbus->board * 2 + 1)))
-			sbus_tid[sbus->board] = (sbus->board * 2 + 1);
+	for_each_node_by_name(dp, "sbi") {
+		int board = of_getintprop_default(dp, "board#", 0);
+
+		if ((board * 2) == boot_cpu_id && cpu_isset(board * 2 + 1, cpu_present_map))
+			sbus_tid[board] = (board * 2 + 1);
+		else if (cpu_isset(board * 2, cpu_present_map))
+			sbus_tid[board] = (board * 2);
+		else if (cpu_isset(board * 2 + 1, cpu_present_map))
+			sbus_tid[board] = (board * 2 + 1);
 		else
-			sbus_tid[sbus->board] = 0xff;
-		if (sbus_tid[sbus->board] != 0xff)
-			sbus_serving_map &= ~(1 << sbus_tid[sbus->board]);
+			sbus_tid[board] = 0xff;
+		if (sbus_tid[board] != 0xff)
+			cpu_clear(sbus_tid[board], sbus_serving_map);
 	}
-	for_each_sbus(sbus)
-		if (sbus_tid[sbus->board] == 0xff) {
+	for_each_node_by_name(dp, "sbi") {
+		int board = of_getintprop_default(dp, "board#", 0);
+		if (sbus_tid[board] == 0xff) {
 			int i = 31;
 				
-			if (!sbus_serving_map)
+			if (cpus_empty(sbus_serving_map))
 				sbus_serving_map = cpu_present_map;
-			while (!(sbus_serving_map & (1 << i)))
+			while (cpu_isset(i, sbus_serving_map))
 				i--;
-			sbus_tid[sbus->board] = i;
-			sbus_serving_map &= ~(1 << i);
+			sbus_tid[board] = i;
+			cpu_clear(i, sbus_serving_map);
 		}
-	for_each_sbus(sbus) {
-		printk("sbus%d IRQs directed to CPU%d\n", sbus->board, sbus_tid[sbus->board]);
-		set_sbi_tid(sbus->devid, sbus_tid[sbus->board] << 3);
+	}
+	for_each_node_by_name(dp, "sbi") {
+		int devid = of_getintprop_default(dp, "device-id", 0);
+		int board = of_getintprop_default(dp, "board#", 0);
+		printk("sbus%d IRQs directed to CPU%d\n", board, sbus_tid[board]);
+		set_sbi_tid(devid, sbus_tid[board] << 3);
 	}
 #else
-	struct sbus_bus *sbus;
 	int cpuid = cpu_logical_map(1);
 
 	if (cpuid == -1)
 		cpuid = cpu_logical_map(0);
-	for_each_sbus(sbus) {
-		sbus_tid[sbus->board] = cpuid;
-		set_sbi_tid(sbus->devid, cpuid << 3);
+	for_each_node_by_name(dp, "sbi") {
+		int devid = of_getintprop_default(dp, "device-id", 0);
+		int board = of_getintprop_default(dp, "board#", 0);
+		sbus_tid[board] = cpuid;
+		set_sbi_tid(devid, cpuid << 3);
 	}
 	printk("All sbus IRQs directed to CPU%d\n", cpuid);
 #endif
@@ -458,13 +445,7 @@ void __init sun4d_distribute_irqs(void)
  
 static void sun4d_clear_clock_irq(void)
 {
-	volatile unsigned int clear_intr;
-	clear_intr = sun4d_timers->l10_timer_limit;
-}
-
-static void sun4d_clear_profile_irq(int cpu)
-{
-	bw_get_prof_limit(cpu);
+	sbus_readl(&sun4d_timers->l10_timer_limit);
 }
 
 static void sun4d_load_profile_irq(int cpu, unsigned int limit)
@@ -472,98 +453,121 @@ static void sun4d_load_profile_irq(int cpu, unsigned int limit)
 	bw_set_prof_limit(cpu, limit);
 }
 
-static void __init sun4d_init_timers(irq_handler_t counter_fn)
+static void __init sun4d_load_profile_irqs(void)
 {
-	int irq;
-	int cpu;
-	struct resource r;
-	int mid;
+	int cpu = 0, mid;
 
-	/* Map the User Timer registers. */
-	memset(&r, 0, sizeof(r));
+	while (!cpu_find_by_instance(cpu, NULL, &mid)) {
+		sun4d_load_profile_irq(mid >> 3, 0);
+		cpu++;
+	}
+}
+
+static void __init sun4d_fixup_trap_table(void)
+{
 #ifdef CONFIG_SMP
-	r.start = CSR_BASE(boot_cpu_id)+BW_TIMER_LIMIT;
-#else
-	r.start = CSR_BASE(0)+BW_TIMER_LIMIT;
+	unsigned long flags;
+	extern unsigned long lvl14_save[4];
+	struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
+	extern unsigned int real_irq_entry[], smp4d_ticker[];
+	extern unsigned int patchme_maybe_smp_msg[];
+
+	/* Adjust so that we jump directly to smp4d_ticker */
+	lvl14_save[2] += smp4d_ticker - real_irq_entry;
+
+	/* For SMP we use the level 14 ticker, however the bootup code
+	 * has copied the firmware's level 14 vector into the boot cpu's
+	 * trap table, we must fix this now or we get squashed.
+	 */
+	local_irq_save(flags);
+	patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */
+	trap_table->inst_one = lvl14_save[0];
+	trap_table->inst_two = lvl14_save[1];
+	trap_table->inst_three = lvl14_save[2];
+	trap_table->inst_four = lvl14_save[3];
+	local_flush_cache_all();
+	local_irq_restore(flags);
 #endif
-	r.flags = 0xf;
-	sun4d_timers = (struct sun4d_timer_regs *) sbus_ioremap(&r, 0,
-	    PAGE_SIZE, "user timer");
+}
 
-	sun4d_timers->l10_timer_limit =  (((1000000/HZ) + 1) << 10);
-	master_l10_counter = &sun4d_timers->l10_cur_count;
-	master_l10_limit = &sun4d_timers->l10_timer_limit;
+static void __init sun4d_init_timers(irq_handler_t counter_fn)
+{
+	struct device_node *dp;
+	struct resource res;
+	const u32 *reg;
+	int err;
+
+	dp = of_find_node_by_name(NULL, "cpu-unit");
+	if (!dp) {
+		prom_printf("sun4d_init_timers: Unable to find cpu-unit\n");
+		prom_halt();
+	}
 
-	irq = request_irq(TIMER_IRQ,
-			  counter_fn,
-			  (IRQF_DISABLED | SA_STATIC_ALLOC),
-			  "timer", NULL);
-	if (irq) {
-		prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
+	/* Which cpu-unit we use is arbitrary, we can view the bootbus timer
+	 * registers via any cpu's mapping.  The first 'reg' property is the
+	 * bootbus.
+	 */
+	reg = of_get_property(dp, "reg", NULL);
+	if (!reg) {
+		prom_printf("sun4d_init_timers: No reg property\n");
 		prom_halt();
 	}
-	
-	/* Enable user timer free run for CPU 0 in BW */
-	/* bw_set_ctrl(0, bw_get_ctrl(0) | BW_CTRL_USER_TIMER); */
 
-	cpu = 0;
-	while (!cpu_find_by_instance(cpu, NULL, &mid)) {
-		sun4d_load_profile_irq(mid >> 3, 0);
-		cpu++;
+	res.start = reg[1];
+	res.end = reg[2] - 1;
+	res.flags = reg[0] & 0xff;
+	sun4d_timers = of_ioremap(&res, BW_TIMER_LIMIT,
+				  sizeof(struct sun4d_timer_regs), "user timer");
+	if (!sun4d_timers) {
+		prom_printf("sun4d_init_timers: Can't map timer regs\n");
+		prom_halt();
 	}
-		
-#ifdef CONFIG_SMP
-	{
-		unsigned long flags;
-		extern unsigned long lvl14_save[4];
-		struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
-		extern unsigned int real_irq_entry[], smp4d_ticker[];
-		extern unsigned int patchme_maybe_smp_msg[];
-
-		/* Adjust so that we jump directly to smp4d_ticker */
-		lvl14_save[2] += smp4d_ticker - real_irq_entry;
-
-		/* For SMP we use the level 14 ticker, however the bootup code
-		 * has copied the firmware's level 14 vector into the boot cpu's
-		 * trap table, we must fix this now or we get squashed.
-		 */
-		local_irq_save(flags);
-		patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */
-		trap_table->inst_one = lvl14_save[0];
-		trap_table->inst_two = lvl14_save[1];
-		trap_table->inst_three = lvl14_save[2];
-		trap_table->inst_four = lvl14_save[3];
-		local_flush_cache_all();
-		local_irq_restore(flags);
+
+	sbus_writel((((1000000/HZ) + 1) << 10), &sun4d_timers->l10_timer_limit);
+
+	master_l10_counter = &sun4d_timers->l10_cur_count;
+
+	err = request_irq(TIMER_IRQ, counter_fn,
+			  (IRQF_DISABLED | SA_STATIC_ALLOC),
+			  "timer", NULL);
+	if (err) {
+		prom_printf("sun4d_init_timers: request_irq() failed with %d\n", err);
+		prom_halt();
 	}
-#endif
+	sun4d_load_profile_irqs();
+	sun4d_fixup_trap_table();
 }
 
 void __init sun4d_init_sbi_irq(void)
 {
-	struct sbus_bus *sbus;
-	unsigned mask;
+	struct device_node *dp;
+	int target_cpu = 0;
+
+#ifdef CONFIG_SMP
+	target_cpu = boot_cpu_id;
+#endif
 
 	nsbi = 0;
-	for_each_sbus(sbus)
+	for_each_node_by_name(dp, "sbi")
 		nsbi++;
 	sbus_actions = kzalloc (nsbi * 8 * 4 * sizeof(struct sbus_action), GFP_ATOMIC);
 	if (!sbus_actions) {
 		prom_printf("SUN4D: Cannot allocate sbus_actions, halting.\n");
 		prom_halt();
 	}
-	for_each_sbus(sbus) {
-#ifdef CONFIG_SMP	
-		extern unsigned char boot_cpu_id;
-		
-		set_sbi_tid(sbus->devid, boot_cpu_id << 3);
-		sbus_tid[sbus->board] = boot_cpu_id;
-#endif
+	for_each_node_by_name(dp, "sbi") {
+		int devid = of_getintprop_default(dp, "device-id", 0);
+		int board = of_getintprop_default(dp, "board#", 0);
+		unsigned int mask;
+
+		set_sbi_tid(devid, target_cpu << 3);
+		sbus_tid[board] = target_cpu;
+
 		/* Get rid of pending irqs from PROM */
-		mask = acquire_sbi(sbus->devid, 0xffffffff);
+		mask = acquire_sbi(devid, 0xffffffff);
 		if (mask) {
-			printk ("Clearing pending IRQs %08x on SBI %d\n", mask, sbus->board);
-			release_sbi(sbus->devid, mask);
+			printk ("Clearing pending IRQs %08x on SBI %d\n", mask, board);
+			release_sbi(devid, mask);
 		}
 	}
 }
@@ -572,11 +576,9 @@ void __init sun4d_init_IRQ(void)
 {
 	local_irq_disable();
 
-	BTFIXUPSET_CALL(sbint_to_irq, sun4d_sbint_to_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(enable_irq, sun4d_enable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_irq, sun4d_disable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_clock_irq, sun4d_clear_clock_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(clear_profile_irq, sun4d_clear_profile_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(load_profile_irq, sun4d_load_profile_irq, BTFIXUPCALL_NORM);
 	sparc_init_timers = sun4d_init_timers;
 #ifdef CONFIG_SMP
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 6959640..7a6a5e7 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -20,6 +20,7 @@
 #include <linux/swap.h>
 #include <linux/profile.h>
 #include <linux/delay.h>
+#include <linux/cpu.h>
 
 #include <asm/ptrace.h>
 #include <asm/atomic.h>
@@ -30,7 +31,6 @@
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/oplib.h>
-#include <asm/sbus.h>
 #include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
@@ -72,6 +72,17 @@ static void smp_setup_percpu_timer(void);
 extern void cpu_probe(void);
 extern void sun4d_distribute_irqs(void);
 
+static unsigned char cpu_leds[32];
+
+static inline void show_leds(int cpuid)
+{
+	cpuid &= 0x1e;
+	__asm__ __volatile__ ("stba %0, [%1] %2" : :
+			      "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
+			      "r" (ECSR_BASE(cpuid) | BB_LEDS),
+			      "i" (ASI_M_CTL));
+}
+
 void __init smp4d_callin(void)
 {
 	int cpuid = hard_smp4d_processor_id();
@@ -88,6 +99,7 @@ void __init smp4d_callin(void)
 	local_flush_cache_all();
 	local_flush_tlb_all();
 
+	notify_cpu_starting(cpuid);
 	/*
 	 * Unblock the master CPU _only_ when the scheduler state
 	 * of all secondary CPUs will be up-to-date, so after
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 94e02de..f103171 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -20,6 +20,8 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/ptrace.h>
 #include <asm/processor.h>
@@ -35,59 +37,27 @@
 #include <asm/smp.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/sbus.h>
 #include <asm/cacheflush.h>
 
 #include "irq.h"
 
-/* On the sun4m, just like the timers, we have both per-cpu and master
- * interrupt registers.
- */
-
-/* These registers are used for sending/receiving irqs from/to
- * different cpu's.
- */
-struct sun4m_intreg_percpu {
-	unsigned int tbt;        /* Interrupts still pending for this cpu. */
-
-	/* These next two registers are WRITE-ONLY and are only
-	 * "on bit" sensitive, "off bits" written have NO affect.
-	 */
-	unsigned int clear;  /* Clear this cpus irqs here. */
-	unsigned int set;    /* Set this cpus irqs here. */
-	unsigned char space[PAGE_SIZE - 12];
+struct sun4m_irq_percpu {
+	u32		pending;
+	u32		clear;
+	u32		set;
 };
 
-/*
- * djhr
- * Actually the clear and set fields in this struct are misleading..
- * according to the SLAVIO manual (and the same applies for the SEC)
- * the clear field clears bits in the mask which will ENABLE that IRQ
- * the set field sets bits in the mask to DISABLE the IRQ.
- *
- * Also the undirected_xx address in the SLAVIO is defined as
- * RESERVED and write only..
- *
- * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
- *             sun4m machines, for MP the layout makes more sense.
- */
-struct sun4m_intregs {
-	struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
-	unsigned int tbt;                /* IRQ's that are still pending. */
-	unsigned int irqs;               /* Master IRQ bits. */
-
-	/* Again, like the above, two these registers are WRITE-ONLY. */
-	unsigned int clear;              /* Clear master IRQ's by setting bits here. */
-	unsigned int set;                /* Set master IRQ's by setting bits here. */
-
-	/* This register is both READ and WRITE. */
-	unsigned int undirected_target;  /* Which cpu gets undirected irqs. */
+struct sun4m_irq_global {
+	u32		pending;
+	u32		mask;
+	u32		mask_clear;
+	u32		mask_set;
+	u32		interrupt_target;
 };
 
-static unsigned long dummy;
-
-struct sun4m_intregs *sun4m_interrupts;
-unsigned long *irq_rcvreg = &dummy;
+/* Code in entry.S needs to get at these register mappings.  */
+struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
+struct sun4m_irq_global __iomem *sun4m_irq_global;
 
 /* Dave Redman (djhr@tadpole.co.uk)
  * The sun4m interrupt registers.
@@ -101,8 +71,9 @@ unsigned long *irq_rcvreg = &dummy;
 
 #define	SUN4M_INT_MASKALL	0x80000000	  /* mask all interrupts */
 #define	SUN4M_INT_MODULE_ERR	0x40000000	  /* module error */
-#define	SUN4M_INT_M2S_WRITE	0x20000000	  /* write buffer error */
-#define	SUN4M_INT_ECC		0x10000000	  /* ecc memory error */
+#define	SUN4M_INT_M2S_WRITE_ERR	0x20000000	  /* write buffer error */
+#define	SUN4M_INT_ECC_ERR	0x10000000	  /* ecc memory error */
+#define	SUN4M_INT_VME_ERR	0x08000000	  /* vme async error */
 #define	SUN4M_INT_FLOPPY	0x00400000	  /* floppy disk */
 #define	SUN4M_INT_MODULE	0x00200000	  /* module interrupt */
 #define	SUN4M_INT_VIDEO		0x00100000	  /* onboard video */
@@ -113,75 +84,126 @@ unsigned long *irq_rcvreg = &dummy;
 #define	SUN4M_INT_SERIAL	0x00008000	  /* serial ports */
 #define	SUN4M_INT_KBDMS		0x00004000	  /* keyboard/mouse */
 #define	SUN4M_INT_SBUSBITS	0x00003F80	  /* sbus int bits */
+#define	SUN4M_INT_VMEBITS	0x0000007F	  /* vme int bits */
+
+#define	SUN4M_INT_ERROR		(SUN4M_INT_MODULE_ERR |    \
+				 SUN4M_INT_M2S_WRITE_ERR | \
+				 SUN4M_INT_ECC_ERR |       \
+				 SUN4M_INT_VME_ERR)
 
 #define SUN4M_INT_SBUS(x)	(1 << (x+7))
 #define SUN4M_INT_VME(x)	(1 << (x))
 
-/* These tables only apply for interrupts greater than 15..
- * 
- * any intr value below 0x10 is considered to be a soft-int
- * this may be useful or it may not.. but that's how I've done it.
- * and it won't clash with what OBP is telling us about devices.
+/* Interrupt levels used by OBP */
+#define	OBP_INT_LEVEL_SOFT	0x10
+#define	OBP_INT_LEVEL_ONBOARD	0x20
+#define	OBP_INT_LEVEL_SBUS	0x30
+#define	OBP_INT_LEVEL_VME	0x40
+
+/* Interrupt level assignment on sun4m:
+ *
+ *	level		source
+ * ------------------------------------------------------------
+ *        1		softint-1
+ *	  2		softint-2, VME/SBUS level 1
+ *	  3		softint-3, VME/SBUS level 2
+ *	  4		softint-4, onboard SCSI
+ *	  5		softint-5, VME/SBUS level 3
+ *	  6		softint-6, onboard ETHERNET
+ *	  7		softint-7, VME/SBUS level 4
+ *	  8		softint-8, onboard VIDEO
+ *	  9		softint-9, VME/SBUS level 5, Module Interrupt
+ *	 10		softint-10, system counter/timer
+ *	 11		softint-11, VME/SBUS level 6, Floppy
+ *	 12		softint-12, Keyboard/Mouse, Serial
+ *	 13		softint-13, VME/SBUS level 7, ISDN Audio
+ *	 14		softint-14, per-processor counter/timer
+ *	 15		softint-15, Asynchronous Errors (broadcast)
  *
- * take an encoded intr value and lookup if it's valid
- * then get the mask bits that match from irq_mask
+ * Each interrupt source is masked distinctly in the sun4m interrupt
+ * registers.  The PIL level alone is therefore ambiguous, since multiple
+ * interrupt sources map to a single PIL.
  *
- * P3: Translation from irq 0x0d to mask 0x2000 is for MrCoffee.
+ * This ambiguity is resolved in the 'intr' property for device nodes
+ * in the OF device tree.  Each 'intr' property entry is composed of
+ * two 32-bit words.  The first word is the IRQ priority value, which
+ * is what we're intersted in.  The second word is the IRQ vector, which
+ * is unused.
+ *
+ * The low 4 bits of the IRQ priority indicate the PIL, and the upper
+ * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled.  0x20
+ * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
+ *
+ * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
+ * whereas a value of 0x33 is SBUS level 2.  Here are some sample
+ * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
+ * Tadpole S3 GX systems.
+ *
+ * esp: 	0x24	onboard ESP SCSI
+ * le:  	0x26	onboard Lance ETHERNET
+ * p9100:	0x32	SBUS level 1 P9100 video
+ * bpp:  	0x33	SBUS level 2 BPP parallel port device
+ * DBRI:	0x39	SBUS level 5 DBRI ISDN audio
+ * SUNW,leo:	0x39	SBUS level 5 LEO video
+ * pcmcia:	0x3b	SBUS level 6 PCMCIA controller
+ * uctrl:	0x3b	SBUS level 6 UCTRL device
+ * modem:	0x3d	SBUS level 7 MODEM
+ * zs:		0x2c	onboard keyboard/mouse/serial
+ * floppy:	0x2b	onboard Floppy
+ * power:	0x22	onboard power device (XXX unknown mask bit XXX)
  */
-static unsigned char irq_xlate[32] = {
-    /*  0,  1,  2,  3,  4,  5,  6,  7,  8,  9,  a,  b,  c,  d,  e,  f */
-	0,  0,  0,  0,  1,  0,  2,  0,  3,  0,  4,  5,  6, 14,  0,  7,
-	0,  0,  8,  9,  0, 10,  0, 11,  0, 12,  0, 13,  0, 14,  0,  0
-};
 
-static unsigned long irq_mask[] = {
-	0,						  /* illegal index */
-	SUN4M_INT_SCSI,				  	  /*  1 irq 4 */
-	SUN4M_INT_ETHERNET,				  /*  2 irq 6 */
-	SUN4M_INT_VIDEO,				  /*  3 irq 8 */
-	SUN4M_INT_REALTIME,				  /*  4 irq 10 */
-	SUN4M_INT_FLOPPY,				  /*  5 irq 11 */
-	(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),	  	  /*  6 irq 12 */
-	SUN4M_INT_MODULE_ERR,			  	  /*  7 irq 15 */
-	SUN4M_INT_SBUS(0),				  /*  8 irq 2 */
-	SUN4M_INT_SBUS(1),				  /*  9 irq 3 */
-	SUN4M_INT_SBUS(2),				  /* 10 irq 5 */
-	SUN4M_INT_SBUS(3),				  /* 11 irq 7 */
-	SUN4M_INT_SBUS(4),				  /* 12 irq 9 */
-	SUN4M_INT_SBUS(5),				  /* 13 irq 11 */
-	SUN4M_INT_SBUS(6)				  /* 14 irq 13 */
+static unsigned long irq_mask[0x50] = {
+	/* SMP */
+	0,  SUN4M_SOFT_INT(1),
+	SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
+	SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
+	SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
+	SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
+	SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+	SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+	SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+	/* soft */
+	0,  SUN4M_SOFT_INT(1),
+	SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
+	SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
+	SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
+	SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
+	SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+	SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+	SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+	/* onboard */
+	0, 0, 0, 0,
+	SUN4M_INT_SCSI,  0, SUN4M_INT_ETHERNET, 0,
+	SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
+	SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
+	(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
+	SUN4M_INT_AUDIO, 0, SUN4M_INT_MODULE_ERR,
+	/* sbus */
+	0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
+	0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
+	0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
+	0, SUN4M_INT_SBUS(6), 0, 0,
+	/* vme */
+	0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
+	0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
+	0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
+	0, SUN4M_INT_VME(6), 0, 0
 };
 
-static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 };
-
-static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev,
-				       unsigned int sbint)
-{
-	if (sbint >= sizeof(sun4m_pil_map)) {
-		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
-		BUG();
-	}
-	return sun4m_pil_map[sbint] | 0x30;
-}
-
 static unsigned long sun4m_get_irqmask(unsigned int irq)
 {
 	unsigned long mask;
     
-	if (irq > 0x20) {
-		/* OBIO/SBUS interrupts */
-		irq &= 0x1f;
-		mask = irq_mask[irq_xlate[irq]];
-		if (!mask)
-			printk("sun4m_get_irqmask: IRQ%d has no valid mask!\n",irq);
-	} else {
-		/* Soft Interrupts will come here.
-		 * Currently there is no way to trigger them but I'm sure
-		 * something could be cooked up.
-		 */
-		irq &= 0xf;
-		mask = SUN4M_SOFT_INT(irq);
-	}
+	if (irq < 0x50)
+		mask = irq_mask[irq];
+	else
+		mask = 0;
+
+	if (!mask)
+		printk(KERN_ERR "sun4m_get_irqmask: IRQ%d has no valid mask!\n",
+		       irq);
+
 	return mask;
 }
 
@@ -193,9 +215,9 @@ static void sun4m_disable_irq(unsigned int irq_nr)
 	mask = sun4m_get_irqmask(irq_nr);
 	local_irq_save(flags);
 	if (irq_nr > 15)
-		sun4m_interrupts->set = mask;
+		sbus_writel(mask, &sun4m_irq_global->mask_set);
 	else
-		sun4m_interrupts->cpu_intregs[cpu].set = mask;
+		sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
 	local_irq_restore(flags);    
 }
 
@@ -212,13 +234,13 @@ static void sun4m_enable_irq(unsigned int irq_nr)
 		mask = sun4m_get_irqmask(irq_nr);
 		local_irq_save(flags);
 		if (irq_nr > 15)
-			sun4m_interrupts->clear = mask;
+			sbus_writel(mask, &sun4m_irq_global->mask_clear);
 		else
-			sun4m_interrupts->cpu_intregs[cpu].clear = mask;
+			sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
 		local_irq_restore(flags);    
 	} else {
 		local_irq_save(flags);
-		sun4m_interrupts->clear = SUN4M_INT_FLOPPY;
+		sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear);
 		local_irq_restore(flags);
 	}
 }
@@ -236,10 +258,10 @@ static unsigned long cpu_pil_to_imask[16] = {
 /*9*/	SUN4M_INT_SBUS(4) | SUN4M_INT_VME(4) | SUN4M_INT_MODULE_ERR,
 /*10*/	SUN4M_INT_REALTIME,
 /*11*/	SUN4M_INT_SBUS(5) | SUN4M_INT_VME(5) | SUN4M_INT_FLOPPY,
-/*12*/	SUN4M_INT_SERIAL | SUN4M_INT_KBDMS,
-/*13*/	SUN4M_INT_AUDIO,
+/*12*/	SUN4M_INT_SERIAL  | SUN4M_INT_KBDMS,
+/*13*/	SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO,
 /*14*/	SUN4M_INT_E14,
-/*15*/	0x00000000
+/*15*/	SUN4M_INT_ERROR
 };
 
 /* We assume the caller has disabled local interrupts when these are called,
@@ -247,126 +269,141 @@ static unsigned long cpu_pil_to_imask[16] = {
  */
 static void sun4m_disable_pil_irq(unsigned int pil)
 {
-	sun4m_interrupts->set = cpu_pil_to_imask[pil];
+	sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_set);
 }
 
 static void sun4m_enable_pil_irq(unsigned int pil)
 {
-	sun4m_interrupts->clear = cpu_pil_to_imask[pil];
+	sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_clear);
 }
 
 #ifdef CONFIG_SMP
 static void sun4m_send_ipi(int cpu, int level)
 {
-	unsigned long mask;
-
-	mask = sun4m_get_irqmask(level);
-	sun4m_interrupts->cpu_intregs[cpu].set = mask;
+	unsigned long mask = sun4m_get_irqmask(level);
+	sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
 }
 
 static void sun4m_clear_ipi(int cpu, int level)
 {
-	unsigned long mask;
-
-	mask = sun4m_get_irqmask(level);
-	sun4m_interrupts->cpu_intregs[cpu].clear = mask;
+	unsigned long mask = sun4m_get_irqmask(level);
+	sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
 }
 
 static void sun4m_set_udt(int cpu)
 {
-	sun4m_interrupts->undirected_target = cpu;
+	sbus_writel(cpu, &sun4m_irq_global->interrupt_target);
 }
 #endif
 
-#define OBIO_INTR	0x20
-#define TIMER_IRQ  	(OBIO_INTR | 10)
-#define PROFILE_IRQ	(OBIO_INTR | 14)
+struct sun4m_timer_percpu {
+	u32		l14_limit;
+	u32		l14_count;
+	u32		l14_limit_noclear;
+	u32		user_timer_start_stop;
+};
+
+static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
+
+struct sun4m_timer_global {
+	u32		l10_limit;
+	u32		l10_count;
+	u32		l10_limit_noclear;
+	u32		reserved;
+	u32		timer_config;
+};
+
+static struct sun4m_timer_global __iomem *timers_global;
+
+#define TIMER_IRQ  	(OBP_INT_LEVEL_ONBOARD | 10)
 
-static struct sun4m_timer_regs *sun4m_timers;
 unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
 
 static void sun4m_clear_clock_irq(void)
 {
-	volatile unsigned int clear_intr;
-	clear_intr = sun4m_timers->l10_timer_limit;
+	sbus_readl(&timers_global->l10_limit);
 }
 
-static void sun4m_clear_profile_irq(int cpu)
+void sun4m_nmi(struct pt_regs *regs)
 {
-	volatile unsigned int clear;
-    
-	clear = sun4m_timers->cpu_timers[cpu].l14_timer_limit;
+	unsigned long afsr, afar, si;
+
+	printk(KERN_ERR "Aieee: sun4m NMI received!\n");
+	/* XXX HyperSparc hack XXX */
+	__asm__ __volatile__("mov 0x500, %%g1\n\t"
+			     "lda [%%g1] 0x4, %0\n\t"
+			     "mov 0x600, %%g1\n\t"
+			     "lda [%%g1] 0x4, %1\n\t" :
+			     "=r" (afsr), "=r" (afar));
+	printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
+	si = sbus_readl(&sun4m_irq_global->pending);
+	printk(KERN_ERR "si=%08lx\n", si);
+	if (si & SUN4M_INT_MODULE_ERR)
+		printk(KERN_ERR "Module async error\n");
+	if (si & SUN4M_INT_M2S_WRITE_ERR)
+		printk(KERN_ERR "MBus/SBus async error\n");
+	if (si & SUN4M_INT_ECC_ERR)
+		printk(KERN_ERR "ECC memory error\n");
+	if (si & SUN4M_INT_VME_ERR)
+		printk(KERN_ERR "VME async error\n");
+	printk(KERN_ERR "you lose buddy boy...\n");
+	show_regs(regs);
+	prom_halt();
+}
+
+/* Exported for sun4m_smp.c */
+void sun4m_clear_profile_irq(int cpu)
+{
+	sbus_readl(&timers_percpu[cpu]->l14_limit);
 }
 
 static void sun4m_load_profile_irq(int cpu, unsigned int limit)
 {
-	sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit;
+	sbus_writel(limit, &timers_percpu[cpu]->l14_limit);
 }
 
 static void __init sun4m_init_timers(irq_handler_t counter_fn)
 {
-	int reg_count, irq, cpu;
-	struct linux_prom_registers cnt_regs[PROMREG_MAX];
-	int obio_node, cnt_node;
-	struct resource r;
-
-	cnt_node = 0;
-	if((obio_node =
-	    prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 ||
-	   (obio_node = prom_getchild (obio_node)) == 0 ||
-	   (cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) {
-		prom_printf("Cannot find /obio/counter node\n");
-		prom_halt();
+	struct device_node *dp = of_find_node_by_name(NULL, "counter");
+	int i, err, len, num_cpu_timers;
+	const u32 *addr;
+
+	if (!dp) {
+		printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
+		return;
 	}
-	reg_count = prom_getproperty(cnt_node, "reg",
-				     (void *) cnt_regs, sizeof(cnt_regs));
-	reg_count = (reg_count/sizeof(struct linux_prom_registers));
-    
-	/* Apply the obio ranges to the timer registers. */
-	prom_apply_obio_ranges(cnt_regs, reg_count);
-    
-	cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr;
-	cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size;
-	cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io;
-	for(obio_node = 1; obio_node < 4; obio_node++) {
-		cnt_regs[obio_node].phys_addr =
-			cnt_regs[obio_node-1].phys_addr + PAGE_SIZE;
-		cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size;
-		cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io;
+
+	addr = of_get_property(dp, "address", &len);
+	if (!addr) {
+		printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
+		return;
 	}
 
-	memset((char*)&r, 0, sizeof(struct resource));
-	/* Map the per-cpu Counter registers. */
-	r.flags = cnt_regs[0].which_io;
-	r.start = cnt_regs[0].phys_addr;
-	sun4m_timers = (struct sun4m_timer_regs *) sbus_ioremap(&r, 0,
-	    PAGE_SIZE*SUN4M_NCPUS, "sun4m_cpu_cnt");
-	/* Map the system Counter register. */
-	/* XXX Here we expect consequent calls to yeld adjusent maps. */
-	r.flags = cnt_regs[4].which_io;
-	r.start = cnt_regs[4].phys_addr;
-	sbus_ioremap(&r, 0, cnt_regs[4].reg_size, "sun4m_sys_cnt");
-
-	sun4m_timers->l10_timer_limit =  (((1000000/HZ) + 1) << 10);
-	master_l10_counter = &sun4m_timers->l10_cur_count;
-	master_l10_limit = &sun4m_timers->l10_timer_limit;
-
-	irq = request_irq(TIMER_IRQ,
-			  counter_fn,
-			  (IRQF_DISABLED | SA_STATIC_ALLOC),
-			  "timer", NULL);
-	if (irq) {
-		prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
-		prom_halt();
+	num_cpu_timers = (len / sizeof(u32)) - 1;
+	for (i = 0; i < num_cpu_timers; i++) {
+		timers_percpu[i] = (void __iomem *)
+			(unsigned long) addr[i];
 	}
-   
-	if (!cpu_find_by_instance(1, NULL, NULL)) {
-		for(cpu = 0; cpu < 4; cpu++)
-			sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0;
-		sun4m_interrupts->set = SUN4M_INT_E14;
-	} else {
-		sun4m_timers->cpu_timers[0].l14_timer_limit = 0;
+	timers_global = (void __iomem *)
+		(unsigned long) addr[num_cpu_timers];
+
+	sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit);
+
+	master_l10_counter = &timers_global->l10_count;
+
+	err = request_irq(TIMER_IRQ, counter_fn,
+			  (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL);
+	if (err) {
+		printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
+			err);
+		return;
 	}
+
+	for (i = 0; i < num_cpu_timers; i++)
+		sbus_writel(0, &timers_percpu[i]->l14_limit);
+	if (num_cpu_timers == 4)
+		sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
+
 #ifdef CONFIG_SMP
 	{
 		unsigned long flags;
@@ -390,70 +427,43 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn)
 
 void __init sun4m_init_IRQ(void)
 {
-	int ie_node,i;
-	struct linux_prom_registers int_regs[PROMREG_MAX];
-	int num_regs;
-	struct resource r;
-	int mid;
-    
-	local_irq_disable();
-	if((ie_node = prom_searchsiblings(prom_getchild(prom_root_node), "obio")) == 0 ||
-	   (ie_node = prom_getchild (ie_node)) == 0 ||
-	   (ie_node = prom_searchsiblings (ie_node, "interrupt")) == 0) {
-		prom_printf("Cannot find /obio/interrupt node\n");
-		prom_halt();
+	struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
+	int len, i, mid, num_cpu_iregs;
+	const u32 *addr;
+
+	if (!dp) {
+		printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
+		return;
 	}
-	num_regs = prom_getproperty(ie_node, "reg", (char *) int_regs,
-				    sizeof(int_regs));
-	num_regs = (num_regs/sizeof(struct linux_prom_registers));
-    
-	/* Apply the obio ranges to these registers. */
-	prom_apply_obio_ranges(int_regs, num_regs);
-    
-	int_regs[4].phys_addr = int_regs[num_regs-1].phys_addr;
-	int_regs[4].reg_size = int_regs[num_regs-1].reg_size;
-	int_regs[4].which_io = int_regs[num_regs-1].which_io;
-	for(ie_node = 1; ie_node < 4; ie_node++) {
-		int_regs[ie_node].phys_addr = int_regs[ie_node-1].phys_addr + PAGE_SIZE;
-		int_regs[ie_node].reg_size = int_regs[ie_node-1].reg_size;
-		int_regs[ie_node].which_io = int_regs[ie_node-1].which_io;
+
+	addr = of_get_property(dp, "address", &len);
+	if (!addr) {
+		printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
+		return;
 	}
 
-	memset((char *)&r, 0, sizeof(struct resource));
-	/* Map the interrupt registers for all possible cpus. */
-	r.flags = int_regs[0].which_io;
-	r.start = int_regs[0].phys_addr;
-	sun4m_interrupts = (struct sun4m_intregs *) sbus_ioremap(&r, 0,
-	    PAGE_SIZE*SUN4M_NCPUS, "interrupts_percpu");
+	num_cpu_iregs = (len / sizeof(u32)) - 1;
+	for (i = 0; i < num_cpu_iregs; i++) {
+		sun4m_irq_percpu[i] = (void __iomem *)
+			(unsigned long) addr[i];
+	}
+	sun4m_irq_global = (void __iomem *)
+		(unsigned long) addr[num_cpu_iregs];
 
-	/* Map the system interrupt control registers. */
-	r.flags = int_regs[4].which_io;
-	r.start = int_regs[4].phys_addr;
-	sbus_ioremap(&r, 0, int_regs[4].reg_size, "interrupts_system");
+	local_irq_disable();
 
-	sun4m_interrupts->set = ~SUN4M_INT_MASKALL;
+	sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
 	for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
-		sun4m_interrupts->cpu_intregs[mid].clear = ~0x17fff;
-
-	if (!cpu_find_by_instance(1, NULL, NULL)) {
-		/* system wide interrupts go to cpu 0, this should always
-		 * be safe because it is guaranteed to be fitted or OBP doesn't
-		 * come up
-		 *
-		 * Not sure, but writing here on SLAVIO systems may puke
-		 * so I don't do it unless there is more than 1 cpu.
-		 */
-		irq_rcvreg = (unsigned long *)
-				&sun4m_interrupts->undirected_target;
-		sun4m_interrupts->undirected_target = 0;
-	}
-	BTFIXUPSET_CALL(sbint_to_irq, sun4m_sbint_to_irq, BTFIXUPCALL_NORM);
+		sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
+
+	if (num_cpu_iregs == 4)
+		sbus_writel(0, &sun4m_irq_global->interrupt_target);
+
 	BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
 	sparc_init_timers = sun4m_init_timers;
 #ifdef CONFIG_SMP
@@ -461,5 +471,6 @@ void __init sun4m_init_IRQ(void)
 	BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM);
 #endif
+
 	/* Cannot enable interrupts until OBP ticker is disabled. */
 }
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index a14a76a..5fc386d 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -17,6 +17,7 @@
 #include <linux/swap.h>
 #include <linux/profile.h>
 #include <linux/delay.h>
+#include <linux/cpu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
@@ -71,6 +72,8 @@ void __cpuinit smp4m_callin(void)
 	local_flush_cache_all();
 	local_flush_tlb_all();
 
+	notify_cpu_starting(cpuid);
+
 	/* Get our local ticker going. */
 	smp_setup_percpu_timer();
 
@@ -313,6 +316,8 @@ void smp4m_cross_call_irq(void)
 	ccall_info.processors_out[i] = 1;
 }
 
+extern void sun4m_clear_profile_irq(int cpu);
+
 void smp4m_percpu_timer_interrupt(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
@@ -320,7 +325,7 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs)
 
 	old_regs = set_irq_regs(regs);
 
-	clear_profile_irq(cpu);
+	sun4m_clear_profile_irq(cpu);
 
 	profile_tick(CPU_PROFILING);
 
diff --git a/arch/sparc/kernel/sun4setup.c b/arch/sparc/kernel/sun4setup.c
deleted file mode 100644
index 229a52f..0000000
--- a/arch/sparc/kernel/sun4setup.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* sun4setup.c: Setup the hardware address of various items in the sun4
- * 		architecture. Called from idprom_init
- *
- * Copyright (C) 1998 Chris G. Davis (cdavis@cois.on.ca)
- */
-
-#include <asm/page.h>
-#include <asm/oplib.h>
-#include <asm/idprom.h>
-#include <asm/sun4paddr.h>
-#include <asm/machines.h>
-
-int sun4_memreg_physaddr;
-int sun4_ie_physaddr;
-int sun4_clock_physaddr;
-int sun4_timer_physaddr;
-int sun4_eth_physaddr;
-int sun4_si_physaddr;
-int sun4_bwtwo_physaddr;
-int sun4_zs0_physaddr;
-int sun4_zs1_physaddr;
-int sun4_dma_physaddr;
-int sun4_esp_physaddr;
-int sun4_ie_physaddr; 
-
-void __init sun4setup(void)
-{
-	printk("Sun4 Hardware Setup v1.0 18/May/98 Chris Davis (cdavis@cois.on.ca). ");
-	/*
-	  setup standard sun4 info
-	  */
-	sun4_ie_physaddr=SUN4_IE_PHYSADDR;
-
-	/*
-	  setup model specific info
-	  */
-	switch(idprom->id_machtype) {
-		case (SM_SUN4 | SM_4_260 ):
-			printk("Setup for a SUN4/260\n");
-			sun4_memreg_physaddr=SUN4_200_MEMREG_PHYSADDR;
-			sun4_clock_physaddr=SUN4_200_CLOCK_PHYSADDR;
-			sun4_timer_physaddr=SUN4_UNUSED_PHYSADDR;
-			sun4_eth_physaddr=SUN4_200_ETH_PHYSADDR;
-			sun4_si_physaddr=SUN4_200_SI_PHYSADDR;
-			sun4_bwtwo_physaddr=SUN4_200_BWTWO_PHYSADDR;
-			sun4_dma_physaddr=SUN4_UNUSED_PHYSADDR;
-			sun4_esp_physaddr=SUN4_UNUSED_PHYSADDR;
-			break;
-		case (SM_SUN4 | SM_4_330 ):
-			printk("Setup for a SUN4/330\n");
-			sun4_memreg_physaddr=SUN4_300_MEMREG_PHYSADDR;
-			sun4_clock_physaddr=SUN4_300_CLOCK_PHYSADDR;
-			sun4_timer_physaddr=SUN4_300_TIMER_PHYSADDR;
-			sun4_eth_physaddr=SUN4_300_ETH_PHYSADDR;
-			sun4_si_physaddr=SUN4_UNUSED_PHYSADDR;
-			sun4_bwtwo_physaddr=SUN4_300_BWTWO_PHYSADDR;
-			sun4_dma_physaddr=SUN4_300_DMA_PHYSADDR;
-			sun4_esp_physaddr=SUN4_300_ESP_PHYSADDR;
-			break;
-		case (SM_SUN4 | SM_4_470 ):
-			printk("Setup for a SUN4/470\n");
-			sun4_memreg_physaddr=SUN4_400_MEMREG_PHYSADDR;
-			sun4_clock_physaddr=SUN4_400_CLOCK_PHYSADDR;
-			sun4_timer_physaddr=SUN4_400_TIMER_PHYSADDR;
-			sun4_eth_physaddr=SUN4_400_ETH_PHYSADDR;
-			sun4_si_physaddr=SUN4_UNUSED_PHYSADDR;
-			sun4_bwtwo_physaddr=SUN4_400_BWTWO_PHYSADDR;
-			sun4_dma_physaddr=SUN4_400_DMA_PHYSADDR;
-			sun4_esp_physaddr=SUN4_400_ESP_PHYSADDR;
-			break;
-		default:
-			;
-	}
-}
-
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index 4d73421..03035c8 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -53,7 +53,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 	/* See asm-sparc/uaccess.h */
 	if (len > TASK_SIZE - PAGE_SIZE)
 		return -ENOMEM;
-	if (ARCH_SUN4C_SUN4 && len > 0x20000000)
+	if (ARCH_SUN4C && len > 0x20000000)
 		return -ENOMEM;
 	if (!addr)
 		addr = TASK_UNMAPPED_BASE;
@@ -65,7 +65,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 
 	for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) {
 		/* At this point:  (!vmm || addr < vmm->vm_end). */
-		if (ARCH_SUN4C_SUN4 && addr < 0xe0000000 && 0x20000000 - len < addr) {
+		if (ARCH_SUN4C && addr < 0xe0000000 && 0x20000000 - len < addr) {
 			addr = PAGE_OFFSET;
 			vmm = find_vma(current->mm, PAGE_OFFSET);
 		}
@@ -81,7 +81,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 
 asmlinkage unsigned long sparc_brk(unsigned long brk)
 {
-	if(ARCH_SUN4C_SUN4) {
+	if(ARCH_SUN4C) {
 		if ((brk & 0xe0000000) != (current->mm->brk & 0xe0000000))
 			return current->mm->brk;
 	}
@@ -221,7 +221,7 @@ out:
 
 int sparc_mmap_check(unsigned long addr, unsigned long len)
 {
-	if (ARCH_SUN4C_SUN4 &&
+	if (ARCH_SUN4C &&
 	    (len > 0x20000000 ||
 	     (addr < 0xe0000000 && addr + len > 0x20000000)))
 		return -EINVAL;
diff --git a/arch/sparc/kernel/tick14.c b/arch/sparc/kernel/tick14.c
index 707bfda..138bbf5 100644
--- a/arch/sparc/kernel/tick14.c
+++ b/arch/sparc/kernel/tick14.c
@@ -1,31 +1,12 @@
 /* tick14.c
- * linux/arch/sparc/kernel/tick14.c
  *
  * Copyright (C) 1996 David Redman (djhr@tadpole.co.uk)
  *
  * This file handles the Sparc specific level14 ticker
  * This is really useful for profiling OBP uses it for keyboard
  * aborts and other stuff.
- *
- *
  */
-#include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/timex.h>
-#include <linux/interrupt.h>
-
-#include <asm/oplib.h>
-#include <asm/timer.h>
-#include <asm/mostek.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include "irq.h"
 
 extern unsigned long lvl14_save[5];
 static unsigned long *linux_lvl14 = NULL;
@@ -56,31 +37,3 @@ void install_obp_ticker(void)
 	linux_lvl14[2] =  obp_lvl14[2];
 	linux_lvl14[3] =  obp_lvl14[3]; 
 }
-
-void claim_ticker14(irq_handler_t handler,
-		    int irq_nr, unsigned int timeout )
-{
-	int cpu = smp_processor_id();
-
-	/* first we copy the obp handler instructions
-	 */
-	__disable_irq(irq_nr);
-	if (!handler)
-		return;
-    
-	linux_lvl14 = (unsigned long *)lvl14_save[4];
-	obp_lvl14[0] = linux_lvl14[0];
-	obp_lvl14[1] = linux_lvl14[1];
-	obp_lvl14[2] = linux_lvl14[2];
-	obp_lvl14[3] = linux_lvl14[3];
-
-	if (!request_irq(irq_nr,
-			 handler,
-			 (IRQF_DISABLED | SA_STATIC_ALLOC),
-			 "counter14",
-			 NULL)) {
-		install_linux_ticker();
-		load_profile_irq(cpu, timeout);
-		__enable_irq(irq_nr);
-	}
-}
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 0762f5d..62c1d94 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -23,22 +23,24 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/rtc/m48t59.h>
 #include <linux/timex.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/profile.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/platform_device.h>
 
 #include <asm/oplib.h>
 #include <asm/timer.h>
-#include <asm/mostek.h>
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/idprom.h>
 #include <asm/machines.h>
-#include <asm/sun4paddr.h>
 #include <asm/page.h>
 #include <asm/pcic.h>
 #include <asm/irq_regs.h>
@@ -46,34 +48,9 @@
 #include "irq.h"
 
 DEFINE_SPINLOCK(rtc_lock);
-static enum sparc_clock_type sp_clock_typ;
-DEFINE_SPINLOCK(mostek_lock);
-void __iomem *mstk48t02_regs = NULL;
-static struct mostek48t08 __iomem *mstk48t08_regs = NULL;
 static int set_rtc_mmss(unsigned long);
 static int sbus_do_settimeofday(struct timespec *tv);
 
-#ifdef CONFIG_SUN4
-struct intersil *intersil_clock;
-#define intersil_cmd(intersil_reg, intsil_cmd) intersil_reg->int_cmd_reg = \
-	(intsil_cmd)
-
-#define intersil_intr(intersil_reg, intsil_cmd) intersil_reg->int_intr_reg = \
-	(intsil_cmd)
-
-#define intersil_start(intersil_reg) intersil_cmd(intersil_reg, \
-	( INTERSIL_START | INTERSIL_32K | INTERSIL_NORMAL | INTERSIL_24H |\
-	  INTERSIL_INTR_ENABLE))
-
-#define intersil_stop(intersil_reg) intersil_cmd(intersil_reg, \
-	( INTERSIL_STOP | INTERSIL_32K | INTERSIL_NORMAL | INTERSIL_24H |\
-	  INTERSIL_INTR_ENABLE))
-
-#define intersil_read_intr(intersil_reg, towhere) towhere = \
-	intersil_reg->int_intr_reg
-
-#endif
-
 unsigned long profile_pc(struct pt_regs *regs)
 {
 	extern char __copy_user_begin[], __copy_user_end[];
@@ -96,7 +73,6 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 
 __volatile__ unsigned int *master_l10_counter;
-__volatile__ unsigned int *master_l10_limit;
 
 /*
  * timer_interrupt() needs to keep up the real-time clock,
@@ -116,15 +92,7 @@ static irqreturn_t timer_interrupt(int dummy, void *dev_id)
 
 	/* Protect counter clear so that do_gettimeoffset works */
 	write_seqlock(&xtime_lock);
-#ifdef CONFIG_SUN4
-	if((idprom->id_machtype == (SM_SUN4 | SM_4_260)) ||
-	   (idprom->id_machtype == (SM_SUN4 | SM_4_110))) {
-		int temp;
-        	intersil_read_intr(intersil_clock, temp);
-		/* re-enable the irq */
-		enable_pil_irq(10);
-	}
-#endif
+
 	clear_clock_irq();
 
 	do_timer(1);
@@ -147,157 +115,56 @@ static irqreturn_t timer_interrupt(int dummy, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* Kick start a stopped clock (procedure from the Sun NVRAM/hostid FAQ). */
-static void __devinit kick_start_clock(void)
+static unsigned char mostek_read_byte(struct device *dev, u32 ofs)
 {
-	struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs;
-	unsigned char sec;
-	int i, count;
-
-	prom_printf("CLOCK: Clock was stopped. Kick start ");
-
-	spin_lock_irq(&mostek_lock);
-
-	/* Turn on the kick start bit to start the oscillator. */
-	regs->creg |= MSTK_CREG_WRITE;
-	regs->sec &= ~MSTK_STOP;
-	regs->hour |= MSTK_KICK_START;
-	regs->creg &= ~MSTK_CREG_WRITE;
-
-	spin_unlock_irq(&mostek_lock);
-
-	/* Delay to allow the clock oscillator to start. */
-	sec = MSTK_REG_SEC(regs);
-	for (i = 0; i < 3; i++) {
-		while (sec == MSTK_REG_SEC(regs))
-			for (count = 0; count < 100000; count++)
-				/* nothing */ ;
-		prom_printf(".");
-		sec = regs->sec;
-	}
-	prom_printf("\n");
-
-	spin_lock_irq(&mostek_lock);
-
-	/* Turn off kick start and set a "valid" time and date. */
-	regs->creg |= MSTK_CREG_WRITE;
-	regs->hour &= ~MSTK_KICK_START;
-	MSTK_SET_REG_SEC(regs,0);
-	MSTK_SET_REG_MIN(regs,0);
-	MSTK_SET_REG_HOUR(regs,0);
-	MSTK_SET_REG_DOW(regs,5);
-	MSTK_SET_REG_DOM(regs,1);
-	MSTK_SET_REG_MONTH(regs,8);
-	MSTK_SET_REG_YEAR(regs,1996 - MSTK_YEAR_ZERO);
-	regs->creg &= ~MSTK_CREG_WRITE;
-
-	spin_unlock_irq(&mostek_lock);
-
-	/* Ensure the kick start bit is off. If it isn't, turn it off. */
-	while (regs->hour & MSTK_KICK_START) {
-		prom_printf("CLOCK: Kick start still on!\n");
-
-		spin_lock_irq(&mostek_lock);
-		regs->creg |= MSTK_CREG_WRITE;
-		regs->hour &= ~MSTK_KICK_START;
-		regs->creg &= ~MSTK_CREG_WRITE;
-		spin_unlock_irq(&mostek_lock);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = pdev->dev.platform_data;
+	void __iomem *regs = pdata->ioaddr;
+	unsigned char val = readb(regs + ofs);
+
+	/* the year 0 is 1968 */
+	if (ofs == pdata->offset + M48T59_YEAR) {
+		val += 0x68;
+		if ((val & 0xf) > 9)
+			val += 6;
 	}
-
-	prom_printf("CLOCK: Kick start procedure successful.\n");
-}
-
-/* Return nonzero if the clock chip battery is low. */
-static inline int has_low_battery(void)
-{
-	struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs;
-	unsigned char data1, data2;
-
-	spin_lock_irq(&mostek_lock);
-	data1 = regs->eeprom[0];	/* Read some data. */
-	regs->eeprom[0] = ~data1;	/* Write back the complement. */
-	data2 = regs->eeprom[0];	/* Read back the complement. */
-	regs->eeprom[0] = data1;	/* Restore the original value. */
-	spin_unlock_irq(&mostek_lock);
-
-	return (data1 == data2);	/* Was the write blocked? */
+	return val;
 }
 
-static void __devinit mostek_set_system_time(void)
+static void mostek_write_byte(struct device *dev, u32 ofs, u8 val)
 {
-	unsigned int year, mon, day, hour, min, sec;
-	struct mostek48t02 *mregs;
-
-	mregs = (struct mostek48t02 *)mstk48t02_regs;
-	if(!mregs) {
-		prom_printf("Something wrong, clock regs not mapped yet.\n");
-		prom_halt();
-	}		
-	spin_lock_irq(&mostek_lock);
-	mregs->creg |= MSTK_CREG_READ;
-	sec = MSTK_REG_SEC(mregs);
-	min = MSTK_REG_MIN(mregs);
-	hour = MSTK_REG_HOUR(mregs);
-	day = MSTK_REG_DOM(mregs);
-	mon = MSTK_REG_MONTH(mregs);
-	year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-        set_normalized_timespec(&wall_to_monotonic,
-                                -xtime.tv_sec, -xtime.tv_nsec);
-	mregs->creg &= ~MSTK_CREG_READ;
-	spin_unlock_irq(&mostek_lock);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = pdev->dev.platform_data;
+	void __iomem *regs = pdata->ioaddr;
+
+	if (ofs == pdata->offset + M48T59_YEAR) {
+		if (val < 0x68)
+			val += 0x32;
+		else
+			val -= 0x68;
+		if ((val & 0xf) > 9)
+			val += 6;
+		if ((val & 0xf0) > 0x9A)
+			val += 0x60;
+	}
+	writeb(val, regs + ofs);
 }
 
-/* Probe for the real time clock chip on Sun4 */
-static inline void sun4_clock_probe(void)
-{
-#ifdef CONFIG_SUN4
-	int temp;
-	struct resource r;
-
-	memset(&r, 0, sizeof(r));
-	if( idprom->id_machtype == (SM_SUN4 | SM_4_330) ) {
-		sp_clock_typ = MSTK48T02;
-		r.start = sun4_clock_physaddr;
-		mstk48t02_regs = sbus_ioremap(&r, 0,
-				       sizeof(struct mostek48t02), NULL);
-		mstk48t08_regs = NULL;  /* To catch weirdness */
-		intersil_clock = NULL;  /* just in case */
-
-		/* Kick start the clock if it is completely stopped. */
-		if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
-			kick_start_clock();
-	} else if( idprom->id_machtype == (SM_SUN4 | SM_4_260)) {
-		/* intersil setup code */
-		printk("Clock: INTERSIL at %8x ",sun4_clock_physaddr);
-		sp_clock_typ = INTERSIL;
-		r.start = sun4_clock_physaddr;
-		intersil_clock = (struct intersil *) 
-		    sbus_ioremap(&r, 0, sizeof(*intersil_clock), "intersil");
-		mstk48t02_regs = 0;  /* just be sure */
-		mstk48t08_regs = NULL;  /* ditto */
-		/* initialise the clock */
-
-		intersil_intr(intersil_clock,INTERSIL_INT_100HZ);
-
-		intersil_start(intersil_clock);
-
-		intersil_read_intr(intersil_clock, temp);
-                while (!(temp & 0x80))
-                        intersil_read_intr(intersil_clock, temp);
-
-                intersil_read_intr(intersil_clock, temp);
-                while (!(temp & 0x80))
-                        intersil_read_intr(intersil_clock, temp);
-
-		intersil_stop(intersil_clock);
+static struct m48t59_plat_data m48t59_data = {
+	.read_byte = mostek_read_byte,
+	.write_byte = mostek_write_byte,
+};
 
-	}
-#endif
-}
+/* resource is set at runtime */
+static struct platform_device m48t59_rtc = {
+	.name		= "rtc-m48t59",
+	.id		= 0,
+	.num_resources	= 1,
+	.dev	= {
+		.platform_data = &m48t59_data,
+	},
+};
 
-#ifndef CONFIG_SUN4
 static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match)
 {
 	struct device_node *dp = op->node;
@@ -306,38 +173,26 @@ static int __devinit clock_probe(struct of_device *op, const struct of_device_id
 	if (!model)
 		return -ENODEV;
 
+	m48t59_rtc.resource = &op->resource[0];
 	if (!strcmp(model, "mk48t02")) {
-		sp_clock_typ = MSTK48T02;
-
 		/* Map the clock register io area read-only */
-		mstk48t02_regs = of_ioremap(&op->resource[0], 0,
-					    sizeof(struct mostek48t02),
-					    "mk48t02");
-		mstk48t08_regs = NULL;  /* To catch weirdness */
+		m48t59_data.ioaddr = of_ioremap(&op->resource[0], 0,
+						2048, "rtc-m48t59");
+		m48t59_data.type = M48T59RTC_TYPE_M48T02;
 	} else if (!strcmp(model, "mk48t08")) {
-		sp_clock_typ = MSTK48T08;
-		mstk48t08_regs = of_ioremap(&op->resource[0], 0,
-					    sizeof(struct mostek48t08),
-					    "mk48t08");
-
-		mstk48t02_regs = &mstk48t08_regs->regs;
+		m48t59_data.ioaddr = of_ioremap(&op->resource[0], 0,
+						8192, "rtc-m48t59");
+		m48t59_data.type = M48T59RTC_TYPE_M48T08;
 	} else
 		return -ENODEV;
 
-	/* Report a low battery voltage condition. */
-	if (has_low_battery())
-		printk(KERN_CRIT "NVRAM: Low battery voltage!\n");
-
-	/* Kick start the clock if it is completely stopped. */
-	if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
-		kick_start_clock();
-
-	mostek_set_system_time();
+	if (platform_device_register(&m48t59_rtc) < 0)
+		printk(KERN_ERR "Registering RTC device failed\n");
 
 	return 0;
 }
 
-static struct of_device_id clock_match[] = {
+static struct of_device_id __initdata clock_match[] = {
 	{
 		.name = "eeprom",
 	},
@@ -348,7 +203,7 @@ static struct of_platform_driver clock_driver = {
 	.match_table	= clock_match,
 	.probe		= clock_probe,
 	.driver		= {
-		.name	= "clock",
+		.name	= "rtc",
 	},
 };
 
@@ -364,7 +219,6 @@ static int __init clock_init(void)
  * need to see the clock registers.
  */
 fs_initcall(clock_init);
-#endif /* !CONFIG_SUN4 */
 
 static void __init sbus_time_init(void)
 {
@@ -372,51 +226,8 @@ static void __init sbus_time_init(void)
 	BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
 	btfixup();
 
-	if (ARCH_SUN4)
-		sun4_clock_probe();
-
 	sparc_init_timers(timer_interrupt);
 	
-#ifdef CONFIG_SUN4
-	if(idprom->id_machtype == (SM_SUN4 | SM_4_330)) {
-		mostek_set_system_time();
-	} else if(idprom->id_machtype == (SM_SUN4 | SM_4_260) ) {
-		/* initialise the intersil on sun4 */
-		unsigned int year, mon, day, hour, min, sec;
-		int temp;
-		struct intersil *iregs;
-
-		iregs=intersil_clock;
-		if(!iregs) {
-			prom_printf("Something wrong, clock regs not mapped yet.\n");
-			prom_halt();
-		}
-
-		intersil_intr(intersil_clock,INTERSIL_INT_100HZ);
-		disable_pil_irq(10);
-		intersil_stop(iregs);
-		intersil_read_intr(intersil_clock, temp);
-
-		temp = iregs->clk.int_csec;
-
-		sec = iregs->clk.int_sec;
-		min = iregs->clk.int_min;
-		hour = iregs->clk.int_hour;
-		day = iregs->clk.int_day;
-		mon = iregs->clk.int_month;
-		year = MSTK_CVT_YEAR(iregs->clk.int_year);
-
-		enable_pil_irq(10);
-		intersil_start(iregs);
-
-		xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-		xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-	        set_normalized_timespec(&wall_to_monotonic,
- 	                               -xtime.tv_sec, -xtime.tv_nsec);
-		printk("%u/%u/%u %u:%u:%u\n",day,mon,year,hour,min,sec);
-	}
-#endif
-
 	/* Now that OBP ticker has been silenced, it is safe to enable IRQ. */
 	local_irq_enable();
 }
@@ -522,80 +333,15 @@ static int sbus_do_settimeofday(struct timespec *tv)
 	return 0;
 }
 
-/*
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you won't notice until after reboot!
- */
-static int set_rtc_mmss(unsigned long nowtime)
+static int set_rtc_mmss(unsigned long secs)
 {
-	int real_seconds, real_minutes, mostek_minutes;
-	struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs;
-	unsigned long flags;
-#ifdef CONFIG_SUN4
-	struct intersil *iregs = intersil_clock;
-	int temp;
-#endif
+	struct rtc_device *rtc = rtc_class_open("rtc0");
+	int err = -1;
 
-	/* Not having a register set can lead to trouble. */
-	if (!regs) {
-#ifdef CONFIG_SUN4
-		if(!iregs)
-		return -1;
-	 	else {
-			temp = iregs->clk.int_csec;
-
-			mostek_minutes = iregs->clk.int_min;
-
-			real_seconds = nowtime % 60;
-			real_minutes = nowtime / 60;
-			if (((abs(real_minutes - mostek_minutes) + 15)/30) & 1)
-				real_minutes += 30;	/* correct for half hour time zone */
-			real_minutes %= 60;
-
-			if (abs(real_minutes - mostek_minutes) < 30) {
-				intersil_stop(iregs);
-				iregs->clk.int_sec=real_seconds;
-				iregs->clk.int_min=real_minutes;
-				intersil_start(iregs);
-			} else {
-				printk(KERN_WARNING
-			       "set_rtc_mmss: can't update from %d to %d\n",
-				       mostek_minutes, real_minutes);
-				return -1;
-			}
-			
-			return 0;
-		}
-#endif
+	if (rtc) {
+		err = rtc_set_mmss(rtc, secs);
+		rtc_class_close(rtc);
 	}
 
-	spin_lock_irqsave(&mostek_lock, flags);
-	/* Read the current RTC minutes. */
-	regs->creg |= MSTK_CREG_READ;
-	mostek_minutes = MSTK_REG_MIN(regs);
-	regs->creg &= ~MSTK_CREG_READ;
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - mostek_minutes) + 15)/30) & 1)
-		real_minutes += 30;	/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - mostek_minutes) < 30) {
-		regs->creg |= MSTK_CREG_WRITE;
-		MSTK_SET_REG_SEC(regs,real_seconds);
-		MSTK_SET_REG_MIN(regs,real_minutes);
-		regs->creg &= ~MSTK_CREG_WRITE;
-		spin_unlock_irqrestore(&mostek_lock, flags);
-		return 0;
-	} else {
-		spin_unlock_irqrestore(&mostek_lock, flags);
-		return -1;
-	}
+	return err;
 }
diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c
index 5d45d5f..2b7d506 100644
--- a/arch/sparc/kernel/traps.c
+++ b/arch/sparc/kernel/traps.c
@@ -43,23 +43,6 @@ void syscall_trace_exit(struct pt_regs *regs)
 {
 }
 
-void sun4m_nmi(struct pt_regs *regs)
-{
-	unsigned long afsr, afar;
-
-	printk("Aieee: sun4m NMI received!\n");
-	/* XXX HyperSparc hack XXX */
-	__asm__ __volatile__("mov 0x500, %%g1\n\t"
-			     "lda [%%g1] 0x4, %0\n\t"
-			     "mov 0x600, %%g1\n\t"
-			     "lda [%%g1] 0x4, %1\n\t" :
-			     "=r" (afsr), "=r" (afar));
-	printk("afsr=%08lx afar=%08lx\n", afsr, afar);
-	printk("you lose buddy boy...\n");
-	show_regs(regs);
-	prom_halt();
-}
-
 void sun4d_nmi(struct pt_regs *regs)
 {
 	printk("Aieee: sun4d NMI received!\n");
diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile
index 109c8b2..ea88955 100644
--- a/arch/sparc/mm/Makefile
+++ b/arch/sparc/mm/Makefile
@@ -3,13 +3,8 @@
 
 EXTRA_AFLAGS := -ansi
 
-obj-y    := fault.o init.o loadmmu.o generic.o extable.o btfixup.o
-
-ifeq ($(CONFIG_SUN4),y)
-obj-y	 += nosrmmu.o
-else
-obj-y	 += srmmu.o iommu.o io-unit.o hypersparc.o viking.o tsunami.o swift.o
-endif
+obj-y	:= fault.o init.o loadmmu.o generic.o extable.o btfixup.o \
+	    srmmu.o iommu.o io-unit.o hypersparc.o viking.o tsunami.o swift.o
 
 ifdef CONFIG_HIGHMEM
 obj-y	+= highmem.o
diff --git a/arch/sparc/mm/btfixup.c b/arch/sparc/mm/btfixup.c
index a312d12..5175ac2 100644
--- a/arch/sparc/mm/btfixup.c
+++ b/arch/sparc/mm/btfixup.c
@@ -20,11 +20,7 @@
 
 extern char *srmmu_name;
 static char version[] __initdata = "Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz). Patching kernel for ";
-#ifdef CONFIG_SUN4
-static char str_sun4c[] __initdata = "sun4\n";
-#else
 static char str_sun4c[] __initdata = "sun4c\n";
-#endif
 static char str_srmmu[] __initdata = "srmmu[%s]/";
 static char str_iommu[] __initdata = "iommu\n";
 static char str_iounit[] __initdata = "io-unit\n";
@@ -86,7 +82,7 @@ void __init btfixup(void)
 	if (!visited) {
 		visited++;
 		printk(version);
-		if (ARCH_SUN4C_SUN4)
+		if (ARCH_SUN4C)
 			printk(str_sun4c);
 		else {
 			printk(str_srmmu, srmmu_name);
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index 3604c2e..a507e11 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -191,7 +191,7 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
 	 * only copy the information from the master page table,
 	 * nothing more.
 	 */
-	if (!ARCH_SUN4C_SUN4 && address >= TASK_SIZE)
+	if (!ARCH_SUN4C && address >= TASK_SIZE)
 		goto vmalloc_fault;
 
 	info.si_code = SEGV_MAPERR;
diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c
index e103f1b..677c1e1 100644
--- a/arch/sparc/mm/init.c
+++ b/arch/sparc/mm/init.c
@@ -23,6 +23,7 @@
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
 #include <linux/pagemap.h>
+#include <linux/poison.h>
 
 #include <asm/system.h>
 #include <asm/vac-ops.h>
@@ -480,6 +481,7 @@ void free_initmem (void)
 	for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) {
 		struct page *p;
 
+		memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
 		p = virt_to_page(addr);
 
 		ClearPageReserved(p);
@@ -488,20 +490,26 @@ void free_initmem (void)
 		totalram_pages++;
 		num_physpages++;
 	}
-	printk (KERN_INFO "Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10);
+	printk(KERN_INFO "Freeing unused kernel memory: %dk freed\n",
+		(&__init_end - &__init_begin) >> 10);
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
 	if (start < end)
-		printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+		printk(KERN_INFO "Freeing initrd memory: %ldk freed\n",
+			(end - start) >> 10);
 	for (; start < end; start += PAGE_SIZE) {
-		struct page *p = virt_to_page(start);
+		struct page *p;
+
+		memset((void *)start, POISON_FREE_INITMEM, PAGE_SIZE);
+		p = virt_to_page(start);
 
 		ClearPageReserved(p);
 		init_page_count(p);
 		__free_page(p);
+		totalram_pages++;
 		num_physpages++;
 	}
 }
diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c
index f167835..daadf5f 100644
--- a/arch/sparc/mm/io-unit.c
+++ b/arch/sparc/mm/io-unit.c
@@ -12,10 +12,11 @@
 #include <linux/highmem.h>	/* pte_offset_map => kmap_atomic */
 #include <linux/bitops.h>
 #include <linux/scatterlist.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
-#include <asm/sbus.h>
 #include <asm/io.h>
 #include <asm/io-unit.h>
 #include <asm/mxcc.h>
@@ -34,13 +35,10 @@
 #define IOPERM        (IOUPTE_CACHE | IOUPTE_WRITE | IOUPTE_VALID)
 #define MKIOPTE(phys) __iopte((((phys)>>4) & IOUPTE_PAGE) | IOPERM)
 
-void __init
-iounit_init(int sbi_node, int io_node, struct sbus_bus *sbus)
+static void __init iounit_iommu_init(struct of_device *op)
 {
-	iopte_t *xpt, *xptend;
 	struct iounit_struct *iounit;
-	struct linux_prom_registers iommu_promregs[PROMREG_MAX];
-	struct resource r;
+	iopte_t *xpt, *xptend;
 
 	iounit = kzalloc(sizeof(struct iounit_struct), GFP_ATOMIC);
 	if (!iounit) {
@@ -55,18 +53,13 @@ iounit_init(int sbi_node, int io_node, struct sbus_bus *sbus)
 	iounit->rotor[1] = IOUNIT_BMAP2_START;
 	iounit->rotor[2] = IOUNIT_BMAPM_START;
 
-	xpt = NULL;
-	if(prom_getproperty(sbi_node, "reg", (void *) iommu_promregs,
-			    sizeof(iommu_promregs)) != -1) {
-		prom_apply_generic_ranges(io_node, 0, iommu_promregs, 3);
-		memset(&r, 0, sizeof(r));
-		r.flags = iommu_promregs[2].which_io;
-		r.start = iommu_promregs[2].phys_addr;
-		xpt = (iopte_t *) sbus_ioremap(&r, 0, PAGE_SIZE * 16, "XPT");
+	xpt = of_ioremap(&op->resource[2], 0, PAGE_SIZE * 16, "XPT");
+	if (!xpt) {
+		prom_printf("SUN4D: Cannot map External Page Table.");
+		prom_halt();
 	}
-	if(!xpt) panic("Cannot map External Page Table.");
 	
-	sbus->ofdev.dev.archdata.iommu = iounit;
+	op->dev.archdata.iommu = iounit;
 	iounit->page_table = xpt;
 	spin_lock_init(&iounit->lock);
 	
@@ -75,6 +68,25 @@ iounit_init(int sbi_node, int io_node, struct sbus_bus *sbus)
 	     	iopte_val(*xpt++) = 0;
 }
 
+static int __init iounit_init(void)
+{
+	extern void sun4d_init_sbi_irq(void);
+	struct device_node *dp;
+
+	for_each_node_by_name(dp, "sbi") {
+		struct of_device *op = of_find_device_by_node(dp);
+
+		iounit_iommu_init(op);
+		of_propagate_archdata(op);
+	}
+
+	sun4d_init_sbi_irq();
+
+	return 0;
+}
+
+subsys_initcall(iounit_init);
+
 /* One has to hold iounit->lock to call this */
 static unsigned long iounit_get_area(struct iounit_struct *iounit, unsigned long vaddr, int size)
 {
@@ -124,10 +136,10 @@ nexti:	scan = find_next_zero_bit(iounit->bmap, limit, scan);
 	return vaddr;
 }
 
-static __u32 iounit_get_scsi_one(char *vaddr, unsigned long len, struct sbus_bus *sbus)
+static __u32 iounit_get_scsi_one(struct device *dev, char *vaddr, unsigned long len)
 {
+	struct iounit_struct *iounit = dev->archdata.iommu;
 	unsigned long ret, flags;
-	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 	
 	spin_lock_irqsave(&iounit->lock, flags);
 	ret = iounit_get_area(iounit, (unsigned long)vaddr, len);
@@ -135,10 +147,10 @@ static __u32 iounit_get_scsi_one(char *vaddr, unsigned long len, struct sbus_bus
 	return ret;
 }
 
-static void iounit_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus)
+static void iounit_get_scsi_sgl(struct device *dev, struct scatterlist *sg, int sz)
 {
+	struct iounit_struct *iounit = dev->archdata.iommu;
 	unsigned long flags;
-	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 
 	/* FIXME: Cache some resolved pages - often several sg entries are to the same page */
 	spin_lock_irqsave(&iounit->lock, flags);
@@ -151,10 +163,10 @@ static void iounit_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus
 	spin_unlock_irqrestore(&iounit->lock, flags);
 }
 
-static void iounit_release_scsi_one(__u32 vaddr, unsigned long len, struct sbus_bus *sbus)
+static void iounit_release_scsi_one(struct device *dev, __u32 vaddr, unsigned long len)
 {
+	struct iounit_struct *iounit = dev->archdata.iommu;
 	unsigned long flags;
-	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 	
 	spin_lock_irqsave(&iounit->lock, flags);
 	len = ((vaddr & ~PAGE_MASK) + len + (PAGE_SIZE-1)) >> PAGE_SHIFT;
@@ -165,11 +177,11 @@ static void iounit_release_scsi_one(__u32 vaddr, unsigned long len, struct sbus_
 	spin_unlock_irqrestore(&iounit->lock, flags);
 }
 
-static void iounit_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus)
+static void iounit_release_scsi_sgl(struct device *dev, struct scatterlist *sg, int sz)
 {
+	struct iounit_struct *iounit = dev->archdata.iommu;
 	unsigned long flags;
 	unsigned long vaddr, len;
-	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 
 	spin_lock_irqsave(&iounit->lock, flags);
 	while (sz != 0) {
@@ -185,12 +197,12 @@ static void iounit_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_
 }
 
 #ifdef CONFIG_SBUS
-static int iounit_map_dma_area(dma_addr_t *pba, unsigned long va, __u32 addr, int len)
+static int iounit_map_dma_area(struct device *dev, dma_addr_t *pba, unsigned long va, __u32 addr, int len)
 {
+	struct iounit_struct *iounit = dev->archdata.iommu;
 	unsigned long page, end;
 	pgprot_t dvma_prot;
 	iopte_t *iopte;
-	struct sbus_bus *sbus;
 
 	*pba = addr;
 
@@ -212,12 +224,8 @@ static int iounit_map_dma_area(dma_addr_t *pba, unsigned long va, __u32 addr, in
 			
 			i = ((addr - IOUNIT_DMA_BASE) >> PAGE_SHIFT);
 
-			for_each_sbus(sbus) {
-				struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
-
-				iopte = (iopte_t *)(iounit->page_table + i);
-				*iopte = MKIOPTE(__pa(page));
-			}
+			iopte = (iopte_t *)(iounit->page_table + i);
+			*iopte = MKIOPTE(__pa(page));
 		}
 		addr += PAGE_SIZE;
 		va += PAGE_SIZE;
@@ -228,23 +236,10 @@ static int iounit_map_dma_area(dma_addr_t *pba, unsigned long va, __u32 addr, in
 	return 0;
 }
 
-static void iounit_unmap_dma_area(unsigned long addr, int len)
+static void iounit_unmap_dma_area(struct device *dev, unsigned long addr, int len)
 {
 	/* XXX Somebody please fill this in */
 }
-
-/* XXX We do not pass sbus device here, bad. */
-static struct page *iounit_translate_dvma(unsigned long addr)
-{
-	struct sbus_bus *sbus = sbus_root;	/* They are all the same */
-	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
-	int i;
-	iopte_t *iopte;
-
-	i = ((addr - IOUNIT_DMA_BASE) >> PAGE_SHIFT);
-	iopte = (iopte_t *)(iounit->page_table + i);
-	return pfn_to_page(iopte_val(*iopte) >> (PAGE_SHIFT-4)); /* XXX sun4d guru, help */
-}
 #endif
 
 static char *iounit_lockarea(char *vaddr, unsigned long len)
@@ -271,54 +266,5 @@ void __init ld_mmu_iounit(void)
 #ifdef CONFIG_SBUS
 	BTFIXUPSET_CALL(mmu_map_dma_area, iounit_map_dma_area, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(mmu_unmap_dma_area, iounit_unmap_dma_area, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(mmu_translate_dvma, iounit_translate_dvma, BTFIXUPCALL_NORM);
 #endif
 }
-
-__u32 iounit_map_dma_init(struct sbus_bus *sbus, int size)
-{
-	int i, j, k, npages;
-	unsigned long rotor, scan, limit;
-	unsigned long flags;
-	__u32 ret;
-	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
-
-        npages = (size + (PAGE_SIZE-1)) >> PAGE_SHIFT;
-	i = 0x0213;
-	spin_lock_irqsave(&iounit->lock, flags);
-next:	j = (i & 15);
-	rotor = iounit->rotor[j - 1];
-	limit = iounit->limit[j];
-	scan = rotor;
-nexti:	scan = find_next_zero_bit(iounit->bmap, limit, scan);
-	if (scan + npages > limit) {
-		if (limit != rotor) {
-			limit = rotor;
-			scan = iounit->limit[j - 1];
-			goto nexti;
-		}
-		i >>= 4;
-		if (!(i & 15))
-			panic("iounit_map_dma_init: Couldn't find free iopte slots for %d bytes\n", size);
-		goto next;
-	}
-	for (k = 1, scan++; k < npages; k++)
-		if (test_bit(scan++, iounit->bmap))
-			goto nexti;
-	iounit->rotor[j - 1] = (scan < limit) ? scan : iounit->limit[j - 1];
-	scan -= npages;
-	ret = IOUNIT_DMA_BASE + (scan << PAGE_SHIFT);
-	for (k = 0; k < npages; k++, scan++)
-		set_bit(scan, iounit->bmap);
-	spin_unlock_irqrestore(&iounit->lock, flags);
-	return ret;
-}
-
-__u32 iounit_map_dma_page(__u32 vaddr, void *addr, struct sbus_bus *sbus)
-{
-	int scan = (vaddr - IOUNIT_DMA_BASE) >> PAGE_SHIFT;
-	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
-	
-	iounit->page_table[scan] = MKIOPTE(__pa(((unsigned long)addr) & PAGE_MASK));
-	return vaddr + (((unsigned long)addr) & ~PAGE_MASK);
-}
diff --git a/arch/sparc/mm/iommu.c b/arch/sparc/mm/iommu.c
index 4b93427..e7a499e 100644
--- a/arch/sparc/mm/iommu.c
+++ b/arch/sparc/mm/iommu.c
@@ -13,10 +13,11 @@
 #include <linux/slab.h>
 #include <linux/highmem.h>	/* pte_offset_map => kmap_atomic */
 #include <linux/scatterlist.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
-#include <asm/sbus.h>
 #include <asm/io.h>
 #include <asm/mxcc.h>
 #include <asm/mbus.h>
@@ -55,30 +56,21 @@ static pgprot_t dvma_prot;		/* Consistent mapping pte flags */
 #define IOPERM        (IOPTE_CACHE | IOPTE_WRITE | IOPTE_VALID)
 #define MKIOPTE(pfn, perm) (((((pfn)<<8) & IOPTE_PAGE) | (perm)) & ~IOPTE_WAZ)
 
-void __init
-iommu_init(int iommund, struct sbus_bus *sbus)
+static void __init sbus_iommu_init(struct of_device *op)
 {
-	unsigned int impl, vers;
-	unsigned long tmp;
 	struct iommu_struct *iommu;
-	struct linux_prom_registers iommu_promregs[PROMREG_MAX];
-	struct resource r;
+	unsigned int impl, vers;
 	unsigned long *bitmap;
+	unsigned long tmp;
 
 	iommu = kmalloc(sizeof(struct iommu_struct), GFP_ATOMIC);
 	if (!iommu) {
 		prom_printf("Unable to allocate iommu structure\n");
 		prom_halt();
 	}
-	iommu->regs = NULL;
-	if (prom_getproperty(iommund, "reg", (void *) iommu_promregs,
-			 sizeof(iommu_promregs)) != -1) {
-		memset(&r, 0, sizeof(r));
-		r.flags = iommu_promregs[0].which_io;
-		r.start = iommu_promregs[0].phys_addr;
-		iommu->regs = (struct iommu_regs *)
-			sbus_ioremap(&r, 0, PAGE_SIZE * 3, "iommu_regs");
-	}
+
+	iommu->regs = of_ioremap(&op->resource[0], 0, PAGE_SIZE * 3,
+				 "iommu_regs");
 	if (!iommu->regs) {
 		prom_printf("Cannot map IOMMU registers\n");
 		prom_halt();
@@ -128,13 +120,29 @@ iommu_init(int iommund, struct sbus_bus *sbus)
 	else
 		iommu->usemap.num_colors = 1;
 
-	printk("IOMMU: impl %d vers %d table 0x%p[%d B] map [%d b]\n",
-	    impl, vers, iommu->page_table,
-	    (int)(IOMMU_NPTES*sizeof(iopte_t)), (int)IOMMU_NPTES);
+	printk(KERN_INFO "IOMMU: impl %d vers %d table 0x%p[%d B] map [%d b]\n",
+	       impl, vers, iommu->page_table,
+	       (int)(IOMMU_NPTES*sizeof(iopte_t)), (int)IOMMU_NPTES);
+
+	op->dev.archdata.iommu = iommu;
+}
+
+static int __init iommu_init(void)
+{
+	struct device_node *dp;
+
+	for_each_node_by_name(dp, "iommu") {
+		struct of_device *op = of_find_device_by_node(dp);
+
+		sbus_iommu_init(op);
+		of_propagate_archdata(op);
+	}
 
-	sbus->ofdev.dev.archdata.iommu = iommu;
+	return 0;
 }
 
+subsys_initcall(iommu_init);
+
 /* This begs to be btfixup-ed by srmmu. */
 /* Flush the iotlb entries to ram. */
 /* This could be better if we didn't have to flush whole pages. */
@@ -164,9 +172,9 @@ static void iommu_flush_iotlb(iopte_t *iopte, unsigned int niopte)
 	}
 }
 
-static u32 iommu_get_one(struct page *page, int npages, struct sbus_bus *sbus)
+static u32 iommu_get_one(struct device *dev, struct page *page, int npages)
 {
-	struct iommu_struct *iommu = sbus->ofdev.dev.archdata.iommu;
+	struct iommu_struct *iommu = dev->archdata.iommu;
 	int ioptex;
 	iopte_t *iopte, *iopte0;
 	unsigned int busa, busa0;
@@ -194,8 +202,7 @@ static u32 iommu_get_one(struct page *page, int npages, struct sbus_bus *sbus)
 	return busa0;
 }
 
-static u32 iommu_get_scsi_one(char *vaddr, unsigned int len,
-    struct sbus_bus *sbus)
+static u32 iommu_get_scsi_one(struct device *dev, char *vaddr, unsigned int len)
 {
 	unsigned long off;
 	int npages;
@@ -205,22 +212,22 @@ static u32 iommu_get_scsi_one(char *vaddr, unsigned int len,
 	off = (unsigned long)vaddr & ~PAGE_MASK;
 	npages = (off + len + PAGE_SIZE-1) >> PAGE_SHIFT;
 	page = virt_to_page((unsigned long)vaddr & PAGE_MASK);
-	busa = iommu_get_one(page, npages, sbus);
+	busa = iommu_get_one(dev, page, npages);
 	return busa + off;
 }
 
-static __u32 iommu_get_scsi_one_noflush(char *vaddr, unsigned long len, struct sbus_bus *sbus)
+static __u32 iommu_get_scsi_one_noflush(struct device *dev, char *vaddr, unsigned long len)
 {
-	return iommu_get_scsi_one(vaddr, len, sbus);
+	return iommu_get_scsi_one(dev, vaddr, len);
 }
 
-static __u32 iommu_get_scsi_one_gflush(char *vaddr, unsigned long len, struct sbus_bus *sbus)
+static __u32 iommu_get_scsi_one_gflush(struct device *dev, char *vaddr, unsigned long len)
 {
 	flush_page_for_dma(0);
-	return iommu_get_scsi_one(vaddr, len, sbus);
+	return iommu_get_scsi_one(dev, vaddr, len);
 }
 
-static __u32 iommu_get_scsi_one_pflush(char *vaddr, unsigned long len, struct sbus_bus *sbus)
+static __u32 iommu_get_scsi_one_pflush(struct device *dev, char *vaddr, unsigned long len)
 {
 	unsigned long page = ((unsigned long) vaddr) & PAGE_MASK;
 
@@ -228,23 +235,23 @@ static __u32 iommu_get_scsi_one_pflush(char *vaddr, unsigned long len, struct sb
 		flush_page_for_dma(page);
 		page += PAGE_SIZE;
 	}
-	return iommu_get_scsi_one(vaddr, len, sbus);
+	return iommu_get_scsi_one(dev, vaddr, len);
 }
 
-static void iommu_get_scsi_sgl_noflush(struct scatterlist *sg, int sz, struct sbus_bus *sbus)
+static void iommu_get_scsi_sgl_noflush(struct device *dev, struct scatterlist *sg, int sz)
 {
 	int n;
 
 	while (sz != 0) {
 		--sz;
 		n = (sg->length + sg->offset + PAGE_SIZE-1) >> PAGE_SHIFT;
-		sg->dvma_address = iommu_get_one(sg_page(sg), n, sbus) + sg->offset;
+		sg->dvma_address = iommu_get_one(dev, sg_page(sg), n) + sg->offset;
 		sg->dvma_length = (__u32) sg->length;
 		sg = sg_next(sg);
 	}
 }
 
-static void iommu_get_scsi_sgl_gflush(struct scatterlist *sg, int sz, struct sbus_bus *sbus)
+static void iommu_get_scsi_sgl_gflush(struct device *dev, struct scatterlist *sg, int sz)
 {
 	int n;
 
@@ -252,13 +259,13 @@ static void iommu_get_scsi_sgl_gflush(struct scatterlist *sg, int sz, struct sbu
 	while (sz != 0) {
 		--sz;
 		n = (sg->length + sg->offset + PAGE_SIZE-1) >> PAGE_SHIFT;
-		sg->dvma_address = iommu_get_one(sg_page(sg), n, sbus) + sg->offset;
+		sg->dvma_address = iommu_get_one(dev, sg_page(sg), n) + sg->offset;
 		sg->dvma_length = (__u32) sg->length;
 		sg = sg_next(sg);
 	}
 }
 
-static void iommu_get_scsi_sgl_pflush(struct scatterlist *sg, int sz, struct sbus_bus *sbus)
+static void iommu_get_scsi_sgl_pflush(struct device *dev, struct scatterlist *sg, int sz)
 {
 	unsigned long page, oldpage = 0;
 	int n, i;
@@ -283,15 +290,15 @@ static void iommu_get_scsi_sgl_pflush(struct scatterlist *sg, int sz, struct sbu
 			}
 		}
 
-		sg->dvma_address = iommu_get_one(sg_page(sg), n, sbus) + sg->offset;
+		sg->dvma_address = iommu_get_one(dev, sg_page(sg), n) + sg->offset;
 		sg->dvma_length = (__u32) sg->length;
 		sg = sg_next(sg);
 	}
 }
 
-static void iommu_release_one(u32 busa, int npages, struct sbus_bus *sbus)
+static void iommu_release_one(struct device *dev, u32 busa, int npages)
 {
-	struct iommu_struct *iommu = sbus->ofdev.dev.archdata.iommu;
+	struct iommu_struct *iommu = dev->archdata.iommu;
 	int ioptex;
 	int i;
 
@@ -305,17 +312,17 @@ static void iommu_release_one(u32 busa, int npages, struct sbus_bus *sbus)
 	bit_map_clear(&iommu->usemap, ioptex, npages);
 }
 
-static void iommu_release_scsi_one(__u32 vaddr, unsigned long len, struct sbus_bus *sbus)
+static void iommu_release_scsi_one(struct device *dev, __u32 vaddr, unsigned long len)
 {
 	unsigned long off;
 	int npages;
 
 	off = vaddr & ~PAGE_MASK;
 	npages = (off + len + PAGE_SIZE-1) >> PAGE_SHIFT;
-	iommu_release_one(vaddr & PAGE_MASK, npages, sbus);
+	iommu_release_one(dev, vaddr & PAGE_MASK, npages);
 }
 
-static void iommu_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus)
+static void iommu_release_scsi_sgl(struct device *dev, struct scatterlist *sg, int sz)
 {
 	int n;
 
@@ -323,18 +330,18 @@ static void iommu_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_b
 		--sz;
 
 		n = (sg->length + sg->offset + PAGE_SIZE-1) >> PAGE_SHIFT;
-		iommu_release_one(sg->dvma_address & PAGE_MASK, n, sbus);
+		iommu_release_one(dev, sg->dvma_address & PAGE_MASK, n);
 		sg->dvma_address = 0x21212121;
 		sg = sg_next(sg);
 	}
 }
 
 #ifdef CONFIG_SBUS
-static int iommu_map_dma_area(dma_addr_t *pba, unsigned long va,
-    unsigned long addr, int len)
+static int iommu_map_dma_area(struct device *dev, dma_addr_t *pba, unsigned long va,
+			      unsigned long addr, int len)
 {
+	struct iommu_struct *iommu = dev->archdata.iommu;
 	unsigned long page, end;
-	struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu;
 	iopte_t *iopte = iommu->page_table;
 	iopte_t *first;
 	int ioptex;
@@ -397,9 +404,9 @@ static int iommu_map_dma_area(dma_addr_t *pba, unsigned long va,
 	return 0;
 }
 
-static void iommu_unmap_dma_area(unsigned long busa, int len)
+static void iommu_unmap_dma_area(struct device *dev, unsigned long busa, int len)
 {
-	struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu;
+	struct iommu_struct *iommu = dev->archdata.iommu;
 	iopte_t *iopte = iommu->page_table;
 	unsigned long end;
 	int ioptex = (busa - iommu->start) >> PAGE_SHIFT;
@@ -417,15 +424,6 @@ static void iommu_unmap_dma_area(unsigned long busa, int len)
 	iommu_invalidate(iommu->regs);
 	bit_map_clear(&iommu->usemap, ioptex, len >> PAGE_SHIFT);
 }
-
-static struct page *iommu_translate_dvma(unsigned long busa)
-{
-	struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu;
-	iopte_t *iopte = iommu->page_table;
-
-	iopte += ((busa - iommu->start) >> PAGE_SHIFT);
-	return pfn_to_page((iopte_val(*iopte) & IOPTE_PAGE) >> (PAGE_SHIFT-4));
-}
 #endif
 
 static char *iommu_lockarea(char *vaddr, unsigned long len)
@@ -461,7 +459,6 @@ void __init ld_mmu_iommu(void)
 #ifdef CONFIG_SBUS
 	BTFIXUPSET_CALL(mmu_map_dma_area, iommu_map_dma_area, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(mmu_unmap_dma_area, iommu_unmap_dma_area, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(mmu_translate_dvma, iommu_translate_dvma, BTFIXUPCALL_NORM);
 #endif
 
 	if (viking_mxcc_present || srmmu_modtype == HyperSparc) {
diff --git a/arch/sparc/mm/nosrmmu.c b/arch/sparc/mm/nosrmmu.c
deleted file mode 100644
index 3701f70..0000000
--- a/arch/sparc/mm/nosrmmu.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * nosrmmu.c: This file is a bunch of dummies for sun4 compiles, 
- *         so that it does not need srmmu and avoid ifdefs.
- *
- * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/mbus.h>
-#include <asm/sbus.h>
-
-static char shouldnothappen[] __initdata = "SUN4 kernel can only run on SUN4\n";
-
-enum mbus_module srmmu_modtype;
-void *srmmu_nocache_pool;
-
-int vac_cache_size = 0;
-
-static void __init should_not_happen(void)
-{
-	prom_printf(shouldnothappen);
-	prom_halt();
-}
-
-void __init srmmu_frob_mem_map(unsigned long start_mem)
-{
-	should_not_happen();
-}
-
-unsigned long __init srmmu_paging_init(unsigned long start_mem, unsigned long end_mem)
-{
-	should_not_happen();
-	return 0;
-}
-
-void __init ld_mmu_srmmu(void)
-{
-	should_not_happen();
-}
-
-void srmmu_mapioaddr(unsigned long physaddr, unsigned long virt_addr, int bus_type, int rdonly)
-{
-}
-
-void srmmu_unmapioaddr(unsigned long virt_addr)
-{
-}
-
-__u32 iounit_map_dma_init(struct sbus_bus *sbus, int size)
-{
-	return 0;
-}
-
-__u32 iounit_map_dma_page(__u32 vaddr, void *addr, struct sbus_bus *sbus)
-{
-	return 0;
-}
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index ee30462..6a5d7ca 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -31,7 +31,6 @@
 #include <asm/mbus.h>
 #include <asm/cache.h>
 #include <asm/oplib.h>
-#include <asm/sbus.h>
 #include <asm/asi.h>
 #include <asm/msi.h>
 #include <asm/mmu_context.h>
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index d1782f6..fe65aee 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -31,7 +31,6 @@
 #include <asm/oplib.h>
 #include <asm/openprom.h>
 #include <asm/mmu_context.h>
-#include <asm/sun4paddr.h>
 #include <asm/highmem.h>
 #include <asm/btfixup.h>
 #include <asm/cacheflush.h>
@@ -52,15 +51,11 @@ extern int num_segmaps, num_contexts;
 
 extern unsigned long page_kernel;
 
-#ifdef CONFIG_SUN4
-#define SUN4C_VAC_SIZE sun4c_vacinfo.num_bytes
-#else
 /* That's it, we prom_halt() on sun4c if the cache size is something other than 65536.
  * So let's save some cycles and just use that everywhere except for that bootup
  * sanity check.
  */
 #define SUN4C_VAC_SIZE 65536
-#endif
 
 #define SUN4C_KERNEL_BUCKETS 32
 
@@ -285,75 +280,32 @@ void __init sun4c_probe_vac(void)
 {
 	sun4c_disable_vac();
 
-	if (ARCH_SUN4) {
-		switch (idprom->id_machtype) {
-
-		case (SM_SUN4|SM_4_110):
-			sun4c_vacinfo.type = VAC_NONE;
-			sun4c_vacinfo.num_bytes = 0;
-			sun4c_vacinfo.linesize = 0;
-			sun4c_vacinfo.do_hwflushes = 0;
-			prom_printf("No VAC. Get some bucks and buy a real computer.");
-			prom_halt();
-			break;
-
-		case (SM_SUN4|SM_4_260):
-			sun4c_vacinfo.type = VAC_WRITE_BACK;
-			sun4c_vacinfo.num_bytes = 128 * 1024;
-			sun4c_vacinfo.linesize = 16;
-			sun4c_vacinfo.do_hwflushes = 0;
-			break;
-
-		case (SM_SUN4|SM_4_330):
-			sun4c_vacinfo.type = VAC_WRITE_THROUGH;
-			sun4c_vacinfo.num_bytes = 128 * 1024;
-			sun4c_vacinfo.linesize = 16;
-			sun4c_vacinfo.do_hwflushes = 0;
-			break;
-
-		case (SM_SUN4|SM_4_470):
-			sun4c_vacinfo.type = VAC_WRITE_BACK;
-			sun4c_vacinfo.num_bytes = 128 * 1024;
-			sun4c_vacinfo.linesize = 32;
-			sun4c_vacinfo.do_hwflushes = 0;
-			break;
-
-		default:
-			prom_printf("Cannot initialize VAC - weird sun4 model idprom->id_machtype = %d", idprom->id_machtype);
-			prom_halt();
-		};
+	if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) ||
+	    (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) {
+		/* PROM on SS1 lacks this info, to be super safe we
+		 * hard code it here since this arch is cast in stone.
+		 */
+		sun4c_vacinfo.num_bytes = 65536;
+		sun4c_vacinfo.linesize = 16;
 	} else {
-		sun4c_vacinfo.type = VAC_WRITE_THROUGH;
+		sun4c_vacinfo.num_bytes =
+		 prom_getintdefault(prom_root_node, "vac-size", 65536);
+		sun4c_vacinfo.linesize =
+		 prom_getintdefault(prom_root_node, "vac-linesize", 16);
+	}
+	sun4c_vacinfo.do_hwflushes =
+	 prom_getintdefault(prom_root_node, "vac-hwflush", 0);
 
-		if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) ||
-		    (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) {
-			/* PROM on SS1 lacks this info, to be super safe we
-			 * hard code it here since this arch is cast in stone.
-			 */
-			sun4c_vacinfo.num_bytes = 65536;
-			sun4c_vacinfo.linesize = 16;
-		} else {
-			sun4c_vacinfo.num_bytes =
-			 prom_getintdefault(prom_root_node, "vac-size", 65536);
-			sun4c_vacinfo.linesize =
-			 prom_getintdefault(prom_root_node, "vac-linesize", 16);
-		}
+	if (sun4c_vacinfo.do_hwflushes == 0)
 		sun4c_vacinfo.do_hwflushes =
-		 prom_getintdefault(prom_root_node, "vac-hwflush", 0);
-
-		if (sun4c_vacinfo.do_hwflushes == 0)
-			sun4c_vacinfo.do_hwflushes =
-			 prom_getintdefault(prom_root_node, "vac_hwflush", 0);
+		 prom_getintdefault(prom_root_node, "vac_hwflush", 0);
 
-		if (sun4c_vacinfo.num_bytes != 65536) {
-			prom_printf("WEIRD Sun4C VAC cache size, "
-				    "tell sparclinux@vger.kernel.org");
-			prom_halt();
-		}
+	if (sun4c_vacinfo.num_bytes != 65536) {
+		prom_printf("WEIRD Sun4C VAC cache size, "
+			    "tell sparclinux@vger.kernel.org");
+		prom_halt();
 	}
 
-	sun4c_vacinfo.num_lines =
-		(sun4c_vacinfo.num_bytes / sun4c_vacinfo.linesize);
 	switch (sun4c_vacinfo.linesize) {
 	case 16:
 		sun4c_vacinfo.log2lsize = 4;
@@ -447,49 +399,18 @@ static void __init patch_kernel_fault_handler(void)
 
 static void __init sun4c_probe_mmu(void)
 {
-	if (ARCH_SUN4) {
-		switch (idprom->id_machtype) {
-		case (SM_SUN4|SM_4_110):
-			prom_printf("No support for 4100 yet\n");
-			prom_halt();
-			num_segmaps = 256;
-			num_contexts = 8;
-			break;
-
-		case (SM_SUN4|SM_4_260):
-			/* should be 512 segmaps. when it get fixed */
-			num_segmaps = 256;
-			num_contexts = 16;
-			break;
-
-		case (SM_SUN4|SM_4_330):
-			num_segmaps = 256;
-			num_contexts = 16;
-			break;
-
-		case (SM_SUN4|SM_4_470):
-			/* should be 1024 segmaps. when it get fixed */
-			num_segmaps = 256;
-			num_contexts = 64;
-			break;
-		default:
-			prom_printf("Invalid SUN4 model\n");
-			prom_halt();
-		};
+	if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) ||
+	    (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) {
+		/* Hardcode these just to be safe, PROM on SS1 does
+		* not have this info available in the root node.
+		*/
+		num_segmaps = 128;
+		num_contexts = 8;
 	} else {
-		if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) ||
-		    (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) {
-			/* Hardcode these just to be safe, PROM on SS1 does
-		 	* not have this info available in the root node.
-		 	*/
-			num_segmaps = 128;
-			num_contexts = 8;
-		} else {
-			num_segmaps =
-			    prom_getintdefault(prom_root_node, "mmu-npmg", 128);
-			num_contexts =
-			    prom_getintdefault(prom_root_node, "mmu-nctx", 0x8);
-		}
+		num_segmaps =
+		    prom_getintdefault(prom_root_node, "mmu-npmg", 128);
+		num_contexts =
+		    prom_getintdefault(prom_root_node, "mmu-nctx", 0x8);
 	}
 	patch_kernel_fault_handler();
 }
@@ -501,18 +422,14 @@ void __init sun4c_probe_memerr_reg(void)
 	int node;
 	struct linux_prom_registers regs[1];
 
-	if (ARCH_SUN4) {
-		sun4c_memerr_reg = ioremap(sun4_memreg_physaddr, PAGE_SIZE);
-	} else {
-		node = prom_getchild(prom_root_node);
-		node = prom_searchsiblings(prom_root_node, "memory-error");
-		if (!node)
-			return;
-		if (prom_getproperty(node, "reg", (char *)regs, sizeof(regs)) <= 0)
-			return;
-		/* hmm I think regs[0].which_io is zero here anyways */
-		sun4c_memerr_reg = ioremap(regs[0].phys_addr, regs[0].reg_size);
-	}
+	node = prom_getchild(prom_root_node);
+	node = prom_searchsiblings(prom_root_node, "memory-error");
+	if (!node)
+		return;
+	if (prom_getproperty(node, "reg", (char *)regs, sizeof(regs)) <= 0)
+		return;
+	/* hmm I think regs[0].which_io is zero here anyways */
+	sun4c_memerr_reg = ioremap(regs[0].phys_addr, regs[0].reg_size);
 }
 
 static inline void sun4c_init_ss2_cache_bug(void)
@@ -521,7 +438,6 @@ static inline void sun4c_init_ss2_cache_bug(void)
 
 	if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS2)) ||
 	    (idprom->id_machtype == (SM_SUN4C | SM_4C_IPX)) ||
-	    (idprom->id_machtype == (SM_SUN4 | SM_4_330)) ||
 	    (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC))) {
 		/* Whee.. */
 		printk("SS2 cache bug detected, uncaching trap table page\n");
@@ -532,8 +448,8 @@ static inline void sun4c_init_ss2_cache_bug(void)
 }
 
 /* Addr is always aligned on a page boundary for us already. */
-static int sun4c_map_dma_area(dma_addr_t *pba, unsigned long va,
-    unsigned long addr, int len)
+static int sun4c_map_dma_area(struct device *dev, dma_addr_t *pba, unsigned long va,
+			      unsigned long addr, int len)
 {
 	unsigned long page, end;
 
@@ -555,14 +471,7 @@ static int sun4c_map_dma_area(dma_addr_t *pba, unsigned long va,
 	return 0;
 }
 
-static struct page *sun4c_translate_dvma(unsigned long busa)
-{
-	/* Fortunately for us, bus_addr == uncached_virt in sun4c. */
-	unsigned long pte = sun4c_get_pte(busa);
-	return pfn_to_page(pte & SUN4C_PFN_MASK);
-}
-
-static void sun4c_unmap_dma_area(unsigned long busa, int len)
+static void sun4c_unmap_dma_area(struct device *dev, unsigned long busa, int len)
 {
 	/* Fortunately for us, bus_addr == uncached_virt in sun4c. */
 	/* XXX Implement this */
@@ -624,11 +533,7 @@ static inline void sun4c_init_map_kernelprom(unsigned long kernel_end)
 {
 	unsigned long vaddr;
 	unsigned char pseg, ctx;
-#ifdef CONFIG_SUN4
-	/* sun4/110 and 260 have no kadb. */
-	if ((idprom->id_machtype != (SM_SUN4 | SM_4_260)) && 
-	    (idprom->id_machtype != (SM_SUN4 | SM_4_110))) {
-#endif
+
 	for (vaddr = KADB_DEBUGGER_BEGVM;
 	     vaddr < LINUX_OPPROM_ENDVM;
 	     vaddr += SUN4C_REAL_PGDIR_SIZE) {
@@ -640,9 +545,7 @@ static inline void sun4c_init_map_kernelprom(unsigned long kernel_end)
 			fix_permissions(vaddr, _SUN4C_PAGE_PRIV, 0);
 		}
 	}
-#ifdef CONFIG_SUN4
-	}
-#endif
+
 	for (vaddr = KERNBASE; vaddr < kernel_end; vaddr += SUN4C_REAL_PGDIR_SIZE) {
 		pseg = sun4c_get_segmap(vaddr);
 		mmu_entry_pool[pseg].locked = 1;
@@ -1048,14 +951,10 @@ static struct thread_info *sun4c_alloc_thread_info(void)
 	 * so we must flush the cache to guarantee consistency.
 	 */
 	sun4c_flush_page(pages);
-#ifndef CONFIG_SUN4	
 	sun4c_flush_page(pages + PAGE_SIZE);
-#endif
 
 	sun4c_put_pte(addr, BUCKET_PTE(pages));
-#ifndef CONFIG_SUN4	
 	sun4c_put_pte(addr + PAGE_SIZE, BUCKET_PTE(pages + PAGE_SIZE));
-#endif
 
 #ifdef CONFIG_DEBUG_STACK_USAGE
 	memset((void *)addr, 0, PAGE_SIZE << THREAD_INFO_ORDER);
@@ -1072,13 +971,11 @@ static void sun4c_free_thread_info(struct thread_info *ti)
 
 	/* We are deleting a mapping, so the flush here is mandatory. */
 	sun4c_flush_page(tiaddr);
-#ifndef CONFIG_SUN4	
 	sun4c_flush_page(tiaddr + PAGE_SIZE);
-#endif
+
 	sun4c_put_pte(tiaddr, 0);
-#ifndef CONFIG_SUN4	
 	sun4c_put_pte(tiaddr + PAGE_SIZE, 0);
-#endif
+
 	sun4c_bucket[entry] = BUCKET_EMPTY;
 	if (entry < sun4c_lowbucket_avail)
 		sun4c_lowbucket_avail = entry;
@@ -1211,7 +1108,7 @@ static void sun4c_unlockarea(char *vaddr, unsigned long size)
  * by implication and fool the page locking code above
  * if passed to by mistake.
  */
-static __u32 sun4c_get_scsi_one(char *bufptr, unsigned long len, struct sbus_bus *sbus)
+static __u32 sun4c_get_scsi_one(struct device *dev, char *bufptr, unsigned long len)
 {
 	unsigned long page;
 
@@ -1223,7 +1120,7 @@ static __u32 sun4c_get_scsi_one(char *bufptr, unsigned long len, struct sbus_bus
 	return (__u32)sun4c_lockarea(bufptr, len);
 }
 
-static void sun4c_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus)
+static void sun4c_get_scsi_sgl(struct device *dev, struct scatterlist *sg, int sz)
 {
 	while (sz != 0) {
 		--sz;
@@ -1233,14 +1130,14 @@ static void sun4c_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *
 	}
 }
 
-static void sun4c_release_scsi_one(__u32 bufptr, unsigned long len, struct sbus_bus *sbus)
+static void sun4c_release_scsi_one(struct device *dev, __u32 bufptr, unsigned long len)
 {
 	if (bufptr < sun4c_iobuffer_start)
 		return; /* On kernel stack or similar, see above */
 	sun4c_unlockarea((char *)bufptr, len);
 }
 
-static void sun4c_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus)
+static void sun4c_release_scsi_sgl(struct device *dev, struct scatterlist *sg, int sz)
 {
 	while (sz != 0) {
 		--sz;
@@ -2263,7 +2160,6 @@ void __init ld_mmu_sun4c(void)
 
 	BTFIXUPSET_CALL(mmu_map_dma_area, sun4c_map_dma_area, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(mmu_unmap_dma_area, sun4c_unmap_dma_area, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(mmu_translate_dvma, sun4c_translate_dvma, BTFIXUPCALL_NORM);
 
 	BTFIXUPSET_CALL(sparc_mapiorange, sun4c_mapiorange, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(sparc_unmapiorange, sun4c_unmapiorange, BTFIXUPCALL_NORM);
diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
index 9ab815b..17bb603 100644
--- a/arch/sparc/oprofile/init.c
+++ b/arch/sparc/oprofile/init.c
@@ -12,7 +12,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
  
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	return -ENODEV;
 }
diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile
index 7f5eacf..8f7e185 100644
--- a/arch/sparc/prom/Makefile
+++ b/arch/sparc/prom/Makefile
@@ -4,5 +4,3 @@
 
 lib-y := bootstr.o devmap.o devops.o init.o memory.o misc.o mp.o \
 	 palloc.o ranges.o segment.o console.o printf.o tree.o
-
-lib-$(CONFIG_SUN4) += sun4prom.o
diff --git a/arch/sparc/prom/bootstr.c b/arch/sparc/prom/bootstr.c
index 5a35c76..916831d 100644
--- a/arch/sparc/prom/bootstr.c
+++ b/arch/sparc/prom/bootstr.c
@@ -6,15 +6,12 @@
 
 #include <linux/string.h>
 #include <asm/oplib.h>
-#include <asm/sun4prom.h>
 #include <linux/init.h>
 
 #define BARG_LEN  256
 static char barg_buf[BARG_LEN] = { 0 };
 static char fetched __initdata = 0;
 
-extern linux_sun4_romvec *sun4_romvec;
-
 char * __init
 prom_getbootargs(void)
 {
@@ -28,7 +25,6 @@ prom_getbootargs(void)
 
 	switch(prom_vers) {
 	case PROM_V0:
-	case PROM_SUN4:
 		cp = barg_buf;
 		/* Start from 1 and go over fd(0,0,0)kernel */
 		for(iter = 1; iter < 8; iter++) {
diff --git a/arch/sparc/prom/console.c b/arch/sparc/prom/console.c
index 790057a..b3075d7 100644
--- a/arch/sparc/prom/console.c
+++ b/arch/sparc/prom/console.c
@@ -10,7 +10,6 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <asm/openprom.h>
-#include <asm/sun4prom.h>
 #include <asm/oplib.h>
 #include <asm/system.h>
 #include <linux/string.h>
@@ -30,7 +29,6 @@ prom_nbgetchar(void)
 	spin_lock_irqsave(&prom_lock, flags);
 	switch(prom_vers) {
 	case PROM_V0:
-	case PROM_SUN4:
 		i = (*(romvec->pv_nbgetchar))();
 		break;
 	case PROM_V2:
@@ -63,7 +61,6 @@ prom_nbputchar(char c)
 	spin_lock_irqsave(&prom_lock, flags);
 	switch(prom_vers) {
 	case PROM_V0:
-	case PROM_SUN4:
 		i = (*(romvec->pv_nbputchar))(c);
 		break;
 	case PROM_V2:
diff --git a/arch/sparc/prom/init.c b/arch/sparc/prom/init.c
index 729f870..873217c 100644
--- a/arch/sparc/prom/init.c
+++ b/arch/sparc/prom/init.c
@@ -11,12 +11,10 @@
 
 #include <asm/openprom.h>
 #include <asm/oplib.h>
-#include <asm/sun4prom.h>
 
 struct linux_romvec *romvec;
 enum prom_major_version prom_vers;
 unsigned int prom_rev, prom_prev;
-linux_sun4_romvec *sun4_romvec;
 
 /* The root node of the prom device tree. */
 int prom_root_node;
@@ -34,10 +32,6 @@ extern void prom_ranges_init(void);
 
 void __init prom_init(struct linux_romvec *rp)
 {
-#ifdef CONFIG_SUN4
-	extern struct linux_romvec *sun4_prom_init(void);
-	rp = sun4_prom_init();
-#endif
 	romvec = rp;
 
 	switch(romvec->pv_romvers) {
@@ -50,9 +44,6 @@ void __init prom_init(struct linux_romvec *rp)
 	case 3:
 		prom_vers = PROM_V3;
 		break;
-	case 40:
-		prom_vers = PROM_SUN4;
-		break;
 	default:
 		prom_printf("PROMLIB: Bad PROM version %d\n",
 			    romvec->pv_romvers);
@@ -76,11 +67,8 @@ void __init prom_init(struct linux_romvec *rp)
 
 	prom_ranges_init();
 
-#ifndef CONFIG_SUN4
-	/* SUN4 prints this in sun4_prom_init */
 	printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n",
 	       romvec->pv_romvers, prom_rev);
-#endif
 
 	/* Initialization successful. */
 	return;
diff --git a/arch/sparc/prom/memory.c b/arch/sparc/prom/memory.c
index 947f047..fac7899 100644
--- a/arch/sparc/prom/memory.c
+++ b/arch/sparc/prom/memory.c
@@ -10,7 +10,6 @@
 #include <linux/init.h>
 
 #include <asm/openprom.h>
-#include <asm/sun4prom.h>
 #include <asm/oplib.h>
 #include <asm/page.h>
 
@@ -46,15 +45,6 @@ static int __init prom_meminit_v2(void)
 	return num_ents;
 }
 
-static int __init prom_meminit_sun4(void)
-{
-#ifdef CONFIG_SUN4
-	sp_banks[0].base_addr = 0;
-	sp_banks[0].num_bytes = *(sun4_romvec->memoryavail);
-#endif
-	return 1;
-}
-
 static int sp_banks_cmp(const void *a, const void *b)
 {
 	const struct sparc_phys_banks *x = a, *y = b;
@@ -81,10 +71,6 @@ void __init prom_meminit(void)
 		num_ents = prom_meminit_v2();
 		break;
 
-	case PROM_SUN4:
-		num_ents = prom_meminit_sun4();
-		break;
-
 	default:
 		break;
 	}
diff --git a/arch/sparc/prom/ranges.c b/arch/sparc/prom/ranges.c
index f9b7def..64579a3 100644
--- a/arch/sparc/prom/ranges.c
+++ b/arch/sparc/prom/ranges.c
@@ -9,7 +9,6 @@
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 #include <asm/types.h>
-#include <asm/sbus.h>
 #include <asm/system.h>
 
 struct linux_prom_ranges promlib_obio_ranges[PROMREG_MAX];
diff --git a/arch/sparc/prom/sun4prom.c b/arch/sparc/prom/sun4prom.c
deleted file mode 100644
index 00390a2..0000000
--- a/arch/sparc/prom/sun4prom.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Copyright (C) 1996 The Australian National University.
- * Copyright (C) 1996 Fujitsu Laboratories Limited
- * Copyright (C) 1997 Michael A. Griffith (grif@acm.org)
- * Copyright (C) 1997 Sun Weenie (ko@ko.reno.nv.us)
- * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * 
- * This software may be distributed under the terms of the Gnu
- * Public License version 2 or later
- *
- * fake a really simple Sun prom for the SUN4
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <asm/oplib.h>
-#include <asm/idprom.h> 
-#include <asm/machines.h> 
-#include <asm/sun4prom.h>
-#include <asm/asi.h>
-#include <asm/contregs.h>
-#include <linux/init.h>
-
-static struct linux_romvec sun4romvec;
-static struct idprom sun4_idprom;
-
-struct property {
-	char *name;
-	char *value;
-	int length;
-};
-
-struct node {
-	int level;
-	struct property *properties;
-};
-
-struct property null_properties = { NULL, NULL, -1 };
-
-struct property root_properties[] = {
-	{"device_type", "cpu", 4},
-	{"idprom", (char *)&sun4_idprom, sizeof(struct idprom)},
-	{NULL, NULL, -1}
-};
-
-struct node nodes[] = {
-	{ 0, &null_properties }, 
-	{ 0, root_properties },
-	{ -1,&null_properties }
-};
-
-
-static int no_nextnode(int node)
-{
-	if (nodes[node].level == nodes[node+1].level)
-		return node+1;
-	return -1;
-}
-
-static int no_child(int node)
-{
-	if (nodes[node].level == nodes[node+1].level-1)
-		return node+1;
-	return -1;
-}
-
-static struct property *find_property(int node,char *name)
-{
-	struct property *prop = &nodes[node].properties[0];
-	while (prop && prop->name) {
-		if (strcmp(prop->name,name) == 0) return prop;
-		prop++;
-	}
-	return NULL;
-}
-
-static int no_proplen(int node,char *name)
-{
-	struct property *prop = find_property(node,name);
-	if (prop) return prop->length;
-	return -1;
-}
-
-static int no_getprop(int node,char *name,char *value)
-{
-	struct property *prop = find_property(node,name);
-	if (prop) {
-		memcpy(value,prop->value,prop->length);
-		return 1;
-	}
-	return -1;
-}
-
-static int no_setprop(int node,char *name,char *value,int len)
-{
-	return -1;
-}
-
-static char *no_nextprop(int node,char *name)
-{
-	struct property *prop = find_property(node,name);
-	if (prop) return prop[1].name;
-	return NULL;
-}
-
-static struct linux_nodeops sun4_nodeops = {
-	no_nextnode,
-	no_child,
-	no_proplen,
-	no_getprop,
-	no_setprop,
-	no_nextprop
-};
-	
-static int synch_hook;
-
-struct linux_romvec * __init sun4_prom_init(void)
-{
-	int i;
-	unsigned char x;
-	char *p;
-                                
-	p = (char *)&sun4_idprom;
-	for (i = 0; i < sizeof(sun4_idprom); i++) {
-		__asm__ __volatile__ ("lduba [%1] %2, %0" : "=r" (x) :
-				      "r" (AC_IDPROM + i), "i" (ASI_CONTROL));
-		*p++ = x;
-	}
-
-	memset(&sun4romvec,0,sizeof(sun4romvec));
-
-	sun4_romvec = (linux_sun4_romvec *) SUN4_PROM_VECTOR;
-
-	sun4romvec.pv_romvers = 40;
-	sun4romvec.pv_nodeops = &sun4_nodeops;
-	sun4romvec.pv_reboot = sun4_romvec->reboot;
-	sun4romvec.pv_abort = sun4_romvec->abortentry;
-	sun4romvec.pv_halt = sun4_romvec->exittomon;
-	sun4romvec.pv_synchook = (void (**)(void))&synch_hook;
-	sun4romvec.pv_setctxt = sun4_romvec->setcxsegmap;
-	sun4romvec.pv_v0bootargs = sun4_romvec->bootParam;
-	sun4romvec.pv_nbgetchar = sun4_romvec->mayget;
-	sun4romvec.pv_nbputchar = sun4_romvec->mayput;
-	sun4romvec.pv_stdin = sun4_romvec->insource;
-	sun4romvec.pv_stdout = sun4_romvec->outsink;
-	
-	/*
-	 * We turn on the LEDs to let folks without monitors or
-	 * terminals know we booted.   Nothing too fancy now.  They
-	 * are all on, except for LED 5, which blinks.   When we
-	 * have more time, we can teach the penguin to say "By your
-	 * command" or "Activating turbo boost, Michael". :-)
-	 */
-	sun4_romvec->setLEDs(NULL);
-	
-	printk("PROMLIB: Old Sun4 boot PROM monitor %s, romvec version %d\n",
-		sun4_romvec->monid,
-		sun4_romvec->romvecversion);
-
-	return &sun4romvec;
-}
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 36b4b7a..035b15a 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -18,6 +18,13 @@ config SPARC64
 	select HAVE_ARCH_KGDB
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_ARCH_TRACEHOOK
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select RTC_CLASS
+	select RTC_DRV_M48T59
+	select RTC_DRV_CMOS
+	select RTC_DRV_BQ4802
+	select RTC_DRV_SUN4V
+	select RTC_DRV_STARFIRE
 
 config GENERIC_TIME
 	bool
@@ -31,6 +38,11 @@ config GENERIC_CLOCKEVENTS
 	bool
 	default y
 
+config GENERIC_GPIO
+	bool
+	help
+	  Generic GPIO API support
+
 config 64BIT
 	def_bool y
 
@@ -84,6 +96,7 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
 
 source "init/Kconfig"
+source "kernel/Kconfig.freezer"
 
 menu "Processor type and features"
 
@@ -185,6 +198,17 @@ config US2E_FREQ
 
 	  If in doubt, say N.
 
+config US3_MC
+	tristate "UltraSPARC-III Memory Controller driver"
+	default y
+	help
+	  This adds a driver for the UltraSPARC-III memory controller.
+	  Loading this driver allows exact mnemonic strings to be
+	  printed in the event of a memory error, so that the faulty DIMM
+	  on the motherboard can be matched to the error.
+
+	  If in doubt, say Y, as this information can be very useful.
+
 # Global things across all Sun machines.
 config GENERIC_LOCKBREAK
 	bool
diff --git a/arch/sparc64/Makefile b/arch/sparc64/Makefile
index b785a39..c7214ab 100644
--- a/arch/sparc64/Makefile
+++ b/arch/sparc64/Makefile
@@ -7,7 +7,7 @@
 # Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
 #
 
-CHECKFLAGS	+= -D__sparc__ -D__sparc_v9__ -m64
+CHECKFLAGS	+= -D__sparc__ -D__sparc_v9__ -D__arch64__ -m64
 
 # Undefine sparc when processing vmlinux.lds - it is used
 # And teach CPP we are doing 64 bit builds (for this case)
diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile
index 418b578..c0b8009 100644
--- a/arch/sparc64/kernel/Makefile
+++ b/arch/sparc64/kernel/Makefile
@@ -7,16 +7,16 @@ EXTRA_CFLAGS := -Werror
 
 extra-y		:= head.o init_task.o vmlinux.lds
 
-obj-y		:= process.o setup.o cpu.o idprom.o \
+obj-y		:= process.o setup.o cpu.o idprom.o reboot.o \
 		   traps.o auxio.o una_asm.o sysfs.o iommu.o \
 		   irq.o ptrace.o time.o sys_sparc.o signal.o \
-		   unaligned.o central.o pci.o starfire.o \
-		   power.o sbus.o sparc64_ksyms.o chmc.o \
+		   unaligned.o central.o starfire.o \
+		   power.o sbus.o sparc64_ksyms.o ebus.o \
 		   visemul.o prom.o of_device.o hvapi.o sstate.o mdesc.o
 
 obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
 obj-$(CONFIG_STACKTRACE) += stacktrace.o
-obj-$(CONFIG_PCI)	 += ebus.o pci_common.o \
+obj-$(CONFIG_PCI)	 += pci.o pci_common.o psycho_common.o \
 			    pci_psycho.o pci_sabre.o pci_schizo.o \
 			    pci_sun4v.o pci_sun4v_asm.o pci_fire.o
 obj-$(CONFIG_PCI_MSI)	+= pci_msi.o
@@ -25,6 +25,7 @@ obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o
 obj-$(CONFIG_MODULES) += module.o
 obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o
 obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o
+obj-$(CONFIG_US3_MC) += chmc.o
 obj-$(CONFIG_KPROBES) += kprobes.o
 obj-$(CONFIG_SUN_LDOMS) += ldc.o vio.o viohs.o ds.o
 obj-$(CONFIG_AUDIT) += audit.o
diff --git a/arch/sparc64/kernel/auxio.c b/arch/sparc64/kernel/auxio.c
index dd5c7bf..858beda 100644
--- a/arch/sparc64/kernel/auxio.c
+++ b/arch/sparc64/kernel/auxio.c
@@ -109,7 +109,7 @@ void auxio_set_lte(int on)
 	}
 }
 
-static struct of_device_id auxio_match[] = {
+static struct of_device_id __initdata auxio_match[] = {
 	{
 		.name = "auxio",
 	},
diff --git a/arch/sparc64/kernel/central.c b/arch/sparc64/kernel/central.c
index f2e87d0..05f1c91 100644
--- a/arch/sparc64/kernel/central.c
+++ b/arch/sparc64/kernel/central.c
@@ -1,461 +1,268 @@
 /* central.c: Central FHC driver for Sunfire/Starfire/Wildfire.
  *
- * Copyright (C) 1997, 1999 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1997, 1999, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/bootmem.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
 
-#include <asm/page.h>
 #include <asm/fhc.h>
-#include <asm/starfire.h>
-
-static struct linux_central *central_bus = NULL;
-static struct linux_fhc *fhc_list = NULL;
+#include <asm/upa.h>
+
+struct clock_board {
+	void __iomem		*clock_freq_regs;
+	void __iomem		*clock_regs;
+	void __iomem		*clock_ver_reg;
+	int			num_slots;
+	struct resource		leds_resource;
+	struct platform_device	leds_pdev;
+};
+
+struct fhc {
+	void __iomem		*pregs;
+	bool			central;
+	bool			jtag_master;
+	int			board_num;
+	struct resource		leds_resource;
+	struct platform_device	leds_pdev;
+};
+
+static int __devinit clock_board_calc_nslots(struct clock_board *p)
+{
+	u8 reg = upa_readb(p->clock_regs + CLOCK_STAT1) & 0xc0;
 
-#define IS_CENTRAL_FHC(__fhc)	((__fhc) == central_bus->child)
+	switch (reg) {
+	case 0x40:
+		return 16;
 
-static void central_probe_failure(int line)
-{
-	prom_printf("CENTRAL: Critical device probe failure at central.c:%d\n",
-		    line);
-	prom_halt();
-}
+	case 0xc0:
+		return 8;
 
-static void central_ranges_init(struct linux_central *central)
-{
-	struct device_node *dp = central->prom_node;
-	const void *pval;
-	int len;
-	
-	central->num_central_ranges = 0;
-	pval = of_get_property(dp, "ranges", &len);
-	if (pval) {
-		memcpy(central->central_ranges, pval, len);
-		central->num_central_ranges =
-			(len / sizeof(struct linux_prom_ranges));
+	case 0x80:
+		reg = 0;
+		if (p->clock_ver_reg)
+			reg = upa_readb(p->clock_ver_reg);
+		if (reg) {
+			if (reg & 0x80)
+				return 4;
+			else
+				return 5;
+		}
+		/* Fallthrough */
+	default:
+		return 4;
 	}
 }
 
-static void fhc_ranges_init(struct linux_fhc *fhc)
+static int __devinit clock_board_probe(struct of_device *op,
+				       const struct of_device_id *match)
 {
-	struct device_node *dp = fhc->prom_node;
-	const void *pval;
-	int len;
-	
-	fhc->num_fhc_ranges = 0;
-	pval = of_get_property(dp, "ranges", &len);
-	if (pval) {
-		memcpy(fhc->fhc_ranges, pval, len);
-		fhc->num_fhc_ranges =
-			(len / sizeof(struct linux_prom_ranges));
-	}
-}
+	struct clock_board *p = kzalloc(sizeof(*p), GFP_KERNEL);
+	int err = -ENOMEM;
 
-/* Range application routines are exported to various drivers,
- * so do not __init this.
- */
-static void adjust_regs(struct linux_prom_registers *regp, int nregs,
-			struct linux_prom_ranges *rangep, int nranges)
-{
-	int regc, rngc;
-
-	for (regc = 0; regc < nregs; regc++) {
-		for (rngc = 0; rngc < nranges; rngc++)
-			if (regp[regc].which_io == rangep[rngc].ot_child_space)
-				break; /* Fount it */
-		if (rngc == nranges) /* oops */
-			central_probe_failure(__LINE__);
-		regp[regc].which_io = rangep[rngc].ot_parent_space;
-		regp[regc].phys_addr -= rangep[rngc].ot_child_base;
-		regp[regc].phys_addr += rangep[rngc].ot_parent_base;
+	if (!p) {
+		printk(KERN_ERR "clock_board: Cannot allocate struct clock_board\n");
+		goto out;
 	}
-}
 
-/* Apply probed fhc ranges to registers passed, if no ranges return. */
-static void apply_fhc_ranges(struct linux_fhc *fhc,
-			     struct linux_prom_registers *regs,
-			     int nregs)
-{
-	if (fhc->num_fhc_ranges)
-		adjust_regs(regs, nregs, fhc->fhc_ranges,
-			    fhc->num_fhc_ranges);
-}
+	p->clock_freq_regs = of_ioremap(&op->resource[0], 0,
+					resource_size(&op->resource[0]),
+					"clock_board_freq");
+	if (!p->clock_freq_regs) {
+		printk(KERN_ERR "clock_board: Cannot map clock_freq_regs\n");
+		goto out_free;
+	}
 
-/* Apply probed central ranges to registers passed, if no ranges return. */
-static void apply_central_ranges(struct linux_central *central,
-				 struct linux_prom_registers *regs, int nregs)
-{
-	if (central->num_central_ranges)
-		adjust_regs(regs, nregs, central->central_ranges,
-			    central->num_central_ranges);
-}
+	p->clock_regs = of_ioremap(&op->resource[1], 0,
+				   resource_size(&op->resource[1]),
+				   "clock_board_regs");
+	if (!p->clock_regs) {
+		printk(KERN_ERR "clock_board: Cannot map clock_regs\n");
+		goto out_unmap_clock_freq_regs;
+	}
 
-static void * __init central_alloc_bootmem(unsigned long size)
-{
-	void *ret;
+	if (op->resource[2].flags) {
+		p->clock_ver_reg = of_ioremap(&op->resource[2], 0,
+					      resource_size(&op->resource[2]),
+					      "clock_ver_reg");
+		if (!p->clock_ver_reg) {
+			printk(KERN_ERR "clock_board: Cannot map clock_ver_reg\n");
+			goto out_unmap_clock_regs;
+		}
+	}
 
-	ret = __alloc_bootmem(size, SMP_CACHE_BYTES, 0UL);
-	if (ret != NULL)
-		memset(ret, 0, size);
+	p->num_slots = clock_board_calc_nslots(p);
 
-	return ret;
-}
+	p->leds_resource.start = (unsigned long)
+		(p->clock_regs + CLOCK_CTRL);
+	p->leds_resource.end = p->leds_resource.end;
+	p->leds_resource.name = "leds";
 
-static unsigned long prom_reg_to_paddr(struct linux_prom_registers *r)
-{
-	unsigned long ret = ((unsigned long) r->which_io) << 32;
+	p->leds_pdev.name = "sunfire-clockboard-leds";
+	p->leds_pdev.resource = &p->leds_resource;
+	p->leds_pdev.num_resources = 1;
+	p->leds_pdev.dev.parent = &op->dev;
 
-	return ret | (unsigned long) r->phys_addr;
-}
-
-static void __init probe_other_fhcs(void)
-{
-	struct device_node *dp;
-	const struct linux_prom64_registers *fpregs;
-
-	for_each_node_by_name(dp, "fhc") {
-		struct linux_fhc *fhc;
-		int board;
-		u32 tmp;
-
-		if (dp->parent &&
-		    dp->parent->parent != NULL)
-			continue;
-
-		fhc = (struct linux_fhc *)
-			central_alloc_bootmem(sizeof(struct linux_fhc));
-		if (fhc == NULL)
-			central_probe_failure(__LINE__);
-
-		/* Link it into the FHC chain. */
-		fhc->next = fhc_list;
-		fhc_list = fhc;
-
-		/* Toplevel FHCs have no parent. */
-		fhc->parent = NULL;
-		
-		fhc->prom_node = dp;
-		fhc_ranges_init(fhc);
-
-		/* Non-central FHC's have 64-bit OBP format registers. */
-		fpregs = of_get_property(dp, "reg", NULL);
-		if (!fpregs)
-			central_probe_failure(__LINE__);
-
-		/* Only central FHC needs special ranges applied. */
-		fhc->fhc_regs.pregs = fpregs[0].phys_addr;
-		fhc->fhc_regs.ireg = fpregs[1].phys_addr;
-		fhc->fhc_regs.ffregs = fpregs[2].phys_addr;
-		fhc->fhc_regs.sregs = fpregs[3].phys_addr;
-		fhc->fhc_regs.uregs = fpregs[4].phys_addr;
-		fhc->fhc_regs.tregs = fpregs[5].phys_addr;
-
-		board = of_getintprop_default(dp, "board#", -1);
-		fhc->board = board;
-
-		tmp = upa_readl(fhc->fhc_regs.pregs + FHC_PREGS_JCTRL);
-		if ((tmp & FHC_JTAG_CTRL_MENAB) != 0)
-			fhc->jtag_master = 1;
-		else
-			fhc->jtag_master = 0;
-
-		tmp = upa_readl(fhc->fhc_regs.pregs + FHC_PREGS_ID);
-		printk("FHC(board %d): Version[%x] PartID[%x] Manuf[%x] %s\n",
-		       board,
-		       (tmp & FHC_ID_VERS) >> 28,
-		       (tmp & FHC_ID_PARTID) >> 12,
-		       (tmp & FHC_ID_MANUF) >> 1,
-		       (fhc->jtag_master ? "(JTAG Master)" : ""));
-		
-		/* This bit must be set in all non-central FHC's in
-		 * the system.  When it is clear, this identifies
-		 * the central board.
-		 */
-		tmp = upa_readl(fhc->fhc_regs.pregs + FHC_PREGS_CTRL);
-		tmp |= FHC_CONTROL_IXIST;
-		upa_writel(tmp, fhc->fhc_regs.pregs + FHC_PREGS_CTRL);
+	err = platform_device_register(&p->leds_pdev);
+	if (err) {
+		printk(KERN_ERR "clock_board: Could not register LEDS "
+		       "platform device\n");
+		goto out_unmap_clock_ver_reg;
 	}
-}
 
-static void probe_clock_board(struct linux_central *central,
-			      struct linux_fhc *fhc,
-			      struct device_node *fp)
-{
-	struct device_node *dp;
-	struct linux_prom_registers cregs[3];
-	const struct linux_prom_registers *pr;
-	int nslots, tmp, nregs;
-
-	dp = fp->child;
-	while (dp) {
-		if (!strcmp(dp->name, "clock-board"))
-			break;
-		dp = dp->sibling;
-	}
-	if (!dp)
-		central_probe_failure(__LINE__);
+	printk(KERN_INFO "clock_board: Detected %d slot Enterprise system.\n",
+	       p->num_slots);
 
-	pr = of_get_property(dp, "reg", &nregs);
-	if (!pr)
-		central_probe_failure(__LINE__);
+	err = 0;
+out:
+	return err;
 
-	memcpy(cregs, pr, nregs);
-	nregs /= sizeof(struct linux_prom_registers);
+out_unmap_clock_ver_reg:
+	if (p->clock_ver_reg)
+		of_iounmap(&op->resource[2], p->clock_ver_reg,
+			   resource_size(&op->resource[2]));
 
-	apply_fhc_ranges(fhc, &cregs[0], nregs);
-	apply_central_ranges(central, &cregs[0], nregs);
-	central->cfreg = prom_reg_to_paddr(&cregs[0]);
-	central->clkregs = prom_reg_to_paddr(&cregs[1]);
+out_unmap_clock_regs:
+	of_iounmap(&op->resource[1], p->clock_regs,
+		   resource_size(&op->resource[1]));
 
-	if (nregs == 2)
-		central->clkver = 0UL;
-	else
-		central->clkver = prom_reg_to_paddr(&cregs[2]);
+out_unmap_clock_freq_regs:
+	of_iounmap(&op->resource[0], p->clock_freq_regs,
+		   resource_size(&op->resource[0]));
 
-	tmp = upa_readb(central->clkregs + CLOCK_STAT1);
-	tmp &= 0xc0;
-	switch(tmp) {
-	case 0x40:
-		nslots = 16;
-		break;
-	case 0xc0:
-		nslots = 8;
-		break;
-	case 0x80:
-		if (central->clkver != 0UL &&
-		   upa_readb(central->clkver) != 0) {
-			if ((upa_readb(central->clkver) & 0x80) != 0)
-				nslots = 4;
-			else
-				nslots = 5;
-			break;
-		}
-	default:
-		nslots = 4;
-		break;
-	};
-	central->slots = nslots;
-	printk("CENTRAL: Detected %d slot Enterprise system. cfreg[%02x] cver[%02x]\n",
-	       central->slots, upa_readb(central->cfreg),
-	       (central->clkver ? upa_readb(central->clkver) : 0x00));
+out_free:
+	kfree(p);
+	goto out;
 }
 
-static void ZAP(unsigned long iclr, unsigned long imap)
+static struct of_device_id __initdata clock_board_match[] = {
+	{
+		.name = "clock-board",
+	},
+	{},
+};
+
+static struct of_platform_driver clock_board_driver = {
+	.match_table	= clock_board_match,
+	.probe		= clock_board_probe,
+	.driver		= {
+		.name	= "clock_board",
+	},
+};
+
+static int __devinit fhc_probe(struct of_device *op,
+			       const struct of_device_id *match)
 {
-	u32 imap_tmp;
-
-	upa_writel(0, iclr);
-	upa_readl(iclr);
-	imap_tmp = upa_readl(imap);
-	imap_tmp &= ~(0x80000000);
-	upa_writel(imap_tmp, imap);
-	upa_readl(imap);
-}
+	struct fhc *p = kzalloc(sizeof(*p), GFP_KERNEL);
+	int err = -ENOMEM;
+	u32 reg;
 
-static void init_all_fhc_hw(void)
-{
-	struct linux_fhc *fhc;
-
-	for (fhc = fhc_list; fhc != NULL; fhc = fhc->next) {
-		u32 tmp;
-
-		/* Clear all of the interrupt mapping registers
-		 * just in case OBP left them in a foul state.
-		 */
-		ZAP(fhc->fhc_regs.ffregs + FHC_FFREGS_ICLR,
-		    fhc->fhc_regs.ffregs + FHC_FFREGS_IMAP);
-		ZAP(fhc->fhc_regs.sregs + FHC_SREGS_ICLR,
-		    fhc->fhc_regs.sregs + FHC_SREGS_IMAP);
-		ZAP(fhc->fhc_regs.uregs + FHC_UREGS_ICLR,
-		    fhc->fhc_regs.uregs + FHC_UREGS_IMAP);
-		ZAP(fhc->fhc_regs.tregs + FHC_TREGS_ICLR,
-		    fhc->fhc_regs.tregs + FHC_TREGS_IMAP);
-
-		/* Setup FHC control register. */
-		tmp = upa_readl(fhc->fhc_regs.pregs + FHC_PREGS_CTRL);
-
-		/* All non-central boards have this bit set. */
-		if (! IS_CENTRAL_FHC(fhc))
-			tmp |= FHC_CONTROL_IXIST;
-
-		/* For all FHCs, clear the firmware synchronization
-		 * line and both low power mode enables.
-		 */
-		tmp &= ~(FHC_CONTROL_AOFF | FHC_CONTROL_BOFF |
-			 FHC_CONTROL_SLINE);
-
-		upa_writel(tmp, fhc->fhc_regs.pregs + FHC_PREGS_CTRL);
-		upa_readl(fhc->fhc_regs.pregs + FHC_PREGS_CTRL);
+	if (!p) {
+		printk(KERN_ERR "fhc: Cannot allocate struct fhc\n");
+		goto out;
 	}
 
-}
+	if (!strcmp(op->node->parent->name, "central"))
+		p->central = true;
 
-void __init central_probe(void)
-{
-	struct linux_prom_registers fpregs[6];
-	const struct linux_prom_registers *pr;
-	struct linux_fhc *fhc;
-	struct device_node *dp, *fp;
-	int err;
-
-	dp = of_find_node_by_name(NULL, "central");
-	if (!dp) {
-		if (this_is_starfire)
-			starfire_cpu_setup();
-		return;
+	p->pregs = of_ioremap(&op->resource[0], 0,
+			      resource_size(&op->resource[0]),
+			      "fhc_pregs");
+	if (!p->pregs) {
+		printk(KERN_ERR "fhc: Cannot map pregs\n");
+		goto out_free;
 	}
 
-	/* Ok we got one, grab some memory for software state. */
-	central_bus = (struct linux_central *)
-		central_alloc_bootmem(sizeof(struct linux_central));
-	if (central_bus == NULL)
-		central_probe_failure(__LINE__);
-
-	fhc = (struct linux_fhc *)
-		central_alloc_bootmem(sizeof(struct linux_fhc));
-	if (fhc == NULL)
-		central_probe_failure(__LINE__);
-
-	/* First init central. */
-	central_bus->child = fhc;
-	central_bus->prom_node = dp;
-	central_ranges_init(central_bus);
-
-	/* And then central's FHC. */
-	fhc->next = fhc_list;
-	fhc_list = fhc;
-
-	fhc->parent = central_bus;
-	fp = dp->child;
-	while (fp) {
-		if (!strcmp(fp->name, "fhc"))
-			break;
-		fp = fp->sibling;
+	if (p->central) {
+		reg = upa_readl(p->pregs + FHC_PREGS_BSR);
+		p->board_num = ((reg >> 16) & 1) | ((reg >> 12) & 0x0e);
+	} else {
+		p->board_num = of_getintprop_default(op->node, "board#", -1);
+		if (p->board_num == -1) {
+			printk(KERN_ERR "fhc: No board# property\n");
+			goto out_unmap_pregs;
+		}
+		if (upa_readl(p->pregs + FHC_PREGS_JCTRL) & FHC_JTAG_CTRL_MENAB)
+			p->jtag_master = true;
 	}
-	if (!fp)
-		central_probe_failure(__LINE__);
-
-	fhc->prom_node = fp;
-	fhc_ranges_init(fhc);
-
-	/* Now, map in FHC register set. */
-	pr = of_get_property(fp, "reg", NULL);
-	if (!pr)
-		central_probe_failure(__LINE__);
-	memcpy(fpregs, pr, sizeof(fpregs));
-
-	apply_central_ranges(central_bus, &fpregs[0], 6);
-	
-	fhc->fhc_regs.pregs = prom_reg_to_paddr(&fpregs[0]);
-	fhc->fhc_regs.ireg = prom_reg_to_paddr(&fpregs[1]);
-	fhc->fhc_regs.ffregs = prom_reg_to_paddr(&fpregs[2]);
-	fhc->fhc_regs.sregs = prom_reg_to_paddr(&fpregs[3]);
-	fhc->fhc_regs.uregs = prom_reg_to_paddr(&fpregs[4]);
-	fhc->fhc_regs.tregs = prom_reg_to_paddr(&fpregs[5]);
-
-	/* Obtain board number from board status register, Central's
-	 * FHC lacks "board#" property.
-	 */
-	err = upa_readl(fhc->fhc_regs.pregs + FHC_PREGS_BSR);
-	fhc->board = (((err >> 16) & 0x01) |
-		      ((err >> 12) & 0x0e));
-
-	fhc->jtag_master = 0;
-
-	/* Attach the clock board registers for CENTRAL. */
-	probe_clock_board(central_bus, fhc, fp);
-
-	err = upa_readl(fhc->fhc_regs.pregs + FHC_PREGS_ID);
-	printk("FHC(board %d): Version[%x] PartID[%x] Manuf[%x] (CENTRAL)\n",
-	       fhc->board,
-	       ((err & FHC_ID_VERS) >> 28),
-	       ((err & FHC_ID_PARTID) >> 12),
-	       ((err & FHC_ID_MANUF) >> 1));
-
-	probe_other_fhcs();
-
-	init_all_fhc_hw();
-}
 
-static inline void fhc_ledblink(struct linux_fhc *fhc, int on)
-{
-	u32 tmp;
+	if (!p->central) {
+		p->leds_resource.start = (unsigned long)
+			(p->pregs + FHC_PREGS_CTRL);
+		p->leds_resource.end = p->leds_resource.end;
+		p->leds_resource.name = "leds";
+
+		p->leds_pdev.name = "sunfire-fhc-leds";
+		p->leds_pdev.resource = &p->leds_resource;
+		p->leds_pdev.num_resources = 1;
+		p->leds_pdev.dev.parent = &op->dev;
+
+		err = platform_device_register(&p->leds_pdev);
+		if (err) {
+			printk(KERN_ERR "fhc: Could not register LEDS "
+			       "platform device\n");
+			goto out_unmap_pregs;
+		}
+	}
+	reg = upa_readl(p->pregs + FHC_PREGS_CTRL);
 
-	tmp = upa_readl(fhc->fhc_regs.pregs + FHC_PREGS_CTRL);
+	if (!p->central)
+		reg |= FHC_CONTROL_IXIST;
 
-	/* NOTE: reverse logic on this bit */
-	if (on)
-		tmp &= ~(FHC_CONTROL_RLED);
-	else
-		tmp |= FHC_CONTROL_RLED;
-	tmp &= ~(FHC_CONTROL_AOFF | FHC_CONTROL_BOFF | FHC_CONTROL_SLINE);
+	reg &= ~(FHC_CONTROL_AOFF |
+		 FHC_CONTROL_BOFF |
+		 FHC_CONTROL_SLINE);
 
-	upa_writel(tmp, fhc->fhc_regs.pregs + FHC_PREGS_CTRL);
-	upa_readl(fhc->fhc_regs.pregs + FHC_PREGS_CTRL);
-}
+	upa_writel(reg, p->pregs + FHC_PREGS_CTRL);
+	upa_readl(p->pregs + FHC_PREGS_CTRL);
 
-static inline void central_ledblink(struct linux_central *central, int on)
-{
-	u8 tmp;
-
-	tmp = upa_readb(central->clkregs + CLOCK_CTRL);
+	reg = upa_readl(p->pregs + FHC_PREGS_ID);
+	printk(KERN_INFO "fhc: Board #%d, Version[%x] PartID[%x] Manuf[%x] %s\n",
+	       p->board_num,
+	       (reg & FHC_ID_VERS) >> 28,
+	       (reg & FHC_ID_PARTID) >> 12,
+	       (reg & FHC_ID_MANUF) >> 1,
+	       (p->jtag_master ?
+		"(JTAG Master)" :
+		(p->central ? "(Central)" : "")));
 
-	/* NOTE: reverse logic on this bit */
-	if (on)
-		tmp &= ~(CLOCK_CTRL_RLED);
-	else
-		tmp |= CLOCK_CTRL_RLED;
+	err = 0;
 
-	upa_writeb(tmp, central->clkregs + CLOCK_CTRL);
-	upa_readb(central->clkregs + CLOCK_CTRL);
-}
+out:
+	return err;
 
-static struct timer_list sftimer;
-static int led_state;
+out_unmap_pregs:
+	of_iounmap(&op->resource[0], p->pregs, resource_size(&op->resource[0]));
 
-static void sunfire_timer(unsigned long __ignored)
-{
-	struct linux_fhc *fhc;
-
-	central_ledblink(central_bus, led_state);
-	for (fhc = fhc_list; fhc != NULL; fhc = fhc->next)
-		if (! IS_CENTRAL_FHC(fhc))
-			fhc_ledblink(fhc, led_state);
-	led_state = ! led_state;
-	sftimer.expires = jiffies + (HZ >> 1);
-	add_timer(&sftimer);
+out_free:
+	kfree(p);
+	goto out;
 }
 
-/* After PCI/SBUS busses have been probed, this is called to perform
- * final initialization of all FireHose Controllers in the system.
- */
-void firetruck_init(void)
+static struct of_device_id __initdata fhc_match[] = {
+	{
+		.name = "fhc",
+	},
+	{},
+};
+
+static struct of_platform_driver fhc_driver = {
+	.match_table	= fhc_match,
+	.probe		= fhc_probe,
+	.driver		= {
+		.name	= "fhc",
+	},
+};
+
+static int __init sunfire_init(void)
 {
-	struct linux_central *central = central_bus;
-	u8 ctrl;
-
-	/* No central bus, nothing to do. */
-	if (central == NULL)
-		return;
-
-	/* OBP leaves it on, turn it off so clock board timer LED
-	 * is in sync with FHC ones.
-	 */
-	ctrl = upa_readb(central->clkregs + CLOCK_CTRL);
-	ctrl &= ~(CLOCK_CTRL_RLED);
-	upa_writeb(ctrl, central->clkregs + CLOCK_CTRL);
-
-	led_state = 0;
-	init_timer(&sftimer);
-	sftimer.data = 0;
-	sftimer.function = &sunfire_timer;
-	sftimer.expires = jiffies + (HZ >> 1);
-	add_timer(&sftimer);
+	(void) of_register_driver(&fhc_driver, &of_platform_bus_type);
+	(void) of_register_driver(&clock_board_driver, &of_platform_bus_type);
+	return 0;
 }
+
+subsys_initcall(sunfire_init);
diff --git a/arch/sparc64/kernel/chmc.c b/arch/sparc64/kernel/chmc.c
index 6d4f02e..3b9f4d6 100644
--- a/arch/sparc64/kernel/chmc.c
+++ b/arch/sparc64/kernel/chmc.c
@@ -1,6 +1,6 @@
-/* memctrlr.c: Driver for UltraSPARC-III memory controller.
+/* chmc.c: Driver for UltraSPARC-III memory controller.
  *
- * Copyright (C) 2001, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2001, 2007, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/module.h>
@@ -13,45 +13,64 @@
 #include <linux/smp.h>
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <asm/spitfire.h>
 #include <asm/chmctrl.h>
 #include <asm/cpudata.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
+#include <asm/head.h>
 #include <asm/io.h>
+#include <asm/memctrl.h>
+
+#define DRV_MODULE_NAME		"chmc"
+#define PFX DRV_MODULE_NAME	": "
+#define DRV_MODULE_VERSION	"0.2"
+
+MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
+MODULE_DESCRIPTION("UltraSPARC-III memory controller driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+static int mc_type;
+#define MC_TYPE_SAFARI		1
+#define MC_TYPE_JBUS		2
+
+static dimm_printer_t us3mc_dimm_printer;
 
 #define CHMCTRL_NDGRPS	2
 #define CHMCTRL_NDIMMS	4
 
-#define DIMMS_PER_MC	(CHMCTRL_NDGRPS * CHMCTRL_NDIMMS)
+#define CHMC_DIMMS_PER_MC	(CHMCTRL_NDGRPS * CHMCTRL_NDIMMS)
 
 /* OBP memory-layout property format. */
-struct obp_map {
+struct chmc_obp_map {
 	unsigned char	dimm_map[144];
 	unsigned char	pin_map[576];
 };
 
 #define DIMM_LABEL_SZ	8
 
-struct obp_mem_layout {
+struct chmc_obp_mem_layout {
 	/* One max 8-byte string label per DIMM.  Usually
 	 * this matches the label on the motherboard where
 	 * that DIMM resides.
 	 */
-	char		dimm_labels[DIMMS_PER_MC][DIMM_LABEL_SZ];
+	char			dimm_labels[CHMC_DIMMS_PER_MC][DIMM_LABEL_SZ];
 
 	/* If symmetric use map[0], else it is
 	 * asymmetric and map[1] should be used.
 	 */
-	char		symmetric;
+	char			symmetric;
 
-	struct obp_map	map[2];
+	struct chmc_obp_map	map[2];
 };
 
 #define CHMCTRL_NBANKS	4
 
-struct bank_info {
-	struct mctrl_info	*mp;
+struct chmc_bank_info {
+	struct chmc		*p;
 	int			bank_id;
 
 	u64			raw_reg;
@@ -65,28 +84,406 @@ struct bank_info {
 	unsigned long		size;
 };
 
-struct mctrl_info {
-	struct list_head	list;
-	int			portid;
+struct chmc {
+	struct list_head		list;
+	int				portid;
+
+	struct chmc_obp_mem_layout	layout_prop;
+	int				layout_size;
+
+	void __iomem			*regs;
 
-	struct obp_mem_layout	layout_prop;
-	int			layout_size;
+	u64				timing_control1;
+	u64				timing_control2;
+	u64				timing_control3;
+	u64				timing_control4;
+	u64				memaddr_control;
 
-	void __iomem		*regs;
+	struct chmc_bank_info		logical_banks[CHMCTRL_NBANKS];
+};
+
+#define JBUSMC_REGS_SIZE		8
+
+#define JB_MC_REG1_DIMM2_BANK3		0x8000000000000000UL
+#define JB_MC_REG1_DIMM1_BANK1		0x4000000000000000UL
+#define JB_MC_REG1_DIMM2_BANK2		0x2000000000000000UL
+#define JB_MC_REG1_DIMM1_BANK0		0x1000000000000000UL
+#define JB_MC_REG1_XOR			0x0000010000000000UL
+#define JB_MC_REG1_ADDR_GEN_2		0x000000e000000000UL
+#define JB_MC_REG1_ADDR_GEN_2_SHIFT	37
+#define JB_MC_REG1_ADDR_GEN_1		0x0000001c00000000UL
+#define JB_MC_REG1_ADDR_GEN_1_SHIFT	34
+#define JB_MC_REG1_INTERLEAVE		0x0000000001800000UL
+#define JB_MC_REG1_INTERLEAVE_SHIFT	23
+#define JB_MC_REG1_DIMM2_PTYPE		0x0000000000200000UL
+#define JB_MC_REG1_DIMM2_PTYPE_SHIFT	21
+#define JB_MC_REG1_DIMM1_PTYPE		0x0000000000100000UL
+#define JB_MC_REG1_DIMM1_PTYPE_SHIFT	20
+
+#define PART_TYPE_X8		0
+#define PART_TYPE_X4		1
+
+#define INTERLEAVE_NONE		0
+#define INTERLEAVE_SAME		1
+#define INTERLEAVE_INTERNAL	2
+#define INTERLEAVE_BOTH		3
+
+#define ADDR_GEN_128MB		0
+#define ADDR_GEN_256MB		1
+#define ADDR_GEN_512MB		2
+#define ADDR_GEN_1GB		3
+
+#define JB_NUM_DIMM_GROUPS	2
+#define JB_NUM_DIMMS_PER_GROUP	2
+#define JB_NUM_DIMMS		(JB_NUM_DIMM_GROUPS * JB_NUM_DIMMS_PER_GROUP)
+
+struct jbusmc_obp_map {
+	unsigned char	dimm_map[18];
+	unsigned char	pin_map[144];
+};
+
+struct jbusmc_obp_mem_layout {
+	/* One max 8-byte string label per DIMM.  Usually
+	 * this matches the label on the motherboard where
+	 * that DIMM resides.
+	 */
+	char		dimm_labels[JB_NUM_DIMMS][DIMM_LABEL_SZ];
+
+	/* If symmetric use map[0], else it is
+	 * asymmetric and map[1] should be used.
+	 */
+	char			symmetric;
+
+	struct jbusmc_obp_map	map;
+
+	char			_pad;
+};
 
-	u64			timing_control1;
-	u64			timing_control2;
-	u64			timing_control3;
-	u64			timing_control4;
-	u64			memaddr_control;
+struct jbusmc_dimm_group {
+	struct jbusmc			*controller;
+	int				index;
+	u64				base_addr;
+	u64				size;
+};
 
-	struct bank_info	logical_banks[CHMCTRL_NBANKS];
+struct jbusmc {
+	void __iomem			*regs;
+	u64				mc_reg_1;
+	u32				portid;
+	struct jbusmc_obp_mem_layout	layout;
+	int				layout_len;
+	int				num_dimm_groups;
+	struct jbusmc_dimm_group	dimm_groups[JB_NUM_DIMM_GROUPS];
+	struct list_head		list;
 };
 
+static DEFINE_SPINLOCK(mctrl_list_lock);
 static LIST_HEAD(mctrl_list);
 
+static void mc_list_add(struct list_head *list)
+{
+	spin_lock(&mctrl_list_lock);
+	list_add(list, &mctrl_list);
+	spin_unlock(&mctrl_list_lock);
+}
+
+static void mc_list_del(struct list_head *list)
+{
+	spin_lock(&mctrl_list_lock);
+	list_del_init(list);
+	spin_unlock(&mctrl_list_lock);
+}
+
+#define SYNDROME_MIN	-1
+#define SYNDROME_MAX	144
+
+/* Covert syndrome code into the way the bits are positioned
+ * on the bus.
+ */
+static int syndrome_to_qword_code(int syndrome_code)
+{
+	if (syndrome_code < 128)
+		syndrome_code += 16;
+	else if (syndrome_code < 128 + 9)
+		syndrome_code -= (128 - 7);
+	else if (syndrome_code < (128 + 9 + 3))
+		syndrome_code -= (128 + 9 - 4);
+	else
+		syndrome_code -= (128 + 9 + 3);
+	return syndrome_code;
+}
+
+/* All this magic has to do with how a cache line comes over the wire
+ * on Safari and JBUS.  A 64-bit line comes over in 1 or more quadword
+ * cycles, each of which transmit ECC/MTAG info as well as the actual
+ * data.
+ */
+#define L2_LINE_SIZE		64
+#define L2_LINE_ADDR_MSK	(L2_LINE_SIZE - 1)
+#define QW_PER_LINE		4
+#define QW_BYTES		(L2_LINE_SIZE / QW_PER_LINE)
+#define QW_BITS			144
+#define SAFARI_LAST_BIT		(576 - 1)
+#define JBUS_LAST_BIT		(144 - 1)
+
+static void get_pin_and_dimm_str(int syndrome_code, unsigned long paddr,
+				 int *pin_p, char **dimm_str_p, void *_prop,
+				 int base_dimm_offset)
+{
+	int qword_code = syndrome_to_qword_code(syndrome_code);
+	int cache_line_offset;
+	int offset_inverse;
+	int dimm_map_index;
+	int map_val;
+
+	if (mc_type == MC_TYPE_JBUS) {
+		struct jbusmc_obp_mem_layout *p = _prop;
+
+		/* JBUS */
+		cache_line_offset = qword_code;
+		offset_inverse = (JBUS_LAST_BIT - cache_line_offset);
+		dimm_map_index = offset_inverse / 8;
+		map_val = p->map.dimm_map[dimm_map_index];
+		map_val = ((map_val >> ((7 - (offset_inverse & 7)))) & 1);
+		*dimm_str_p = p->dimm_labels[base_dimm_offset + map_val];
+		*pin_p = p->map.pin_map[cache_line_offset];
+	} else {
+		struct chmc_obp_mem_layout *p = _prop;
+		struct chmc_obp_map *mp;
+		int qword;
+
+		/* Safari */
+		if (p->symmetric)
+			mp = &p->map[0];
+		else
+			mp = &p->map[1];
+
+		qword = (paddr & L2_LINE_ADDR_MSK) / QW_BYTES;
+		cache_line_offset = ((3 - qword) * QW_BITS) + qword_code;
+		offset_inverse = (SAFARI_LAST_BIT - cache_line_offset);
+		dimm_map_index = offset_inverse >> 2;
+		map_val = mp->dimm_map[dimm_map_index];
+		map_val = ((map_val >> ((3 - (offset_inverse & 3)) << 1)) & 0x3);
+		*dimm_str_p = p->dimm_labels[base_dimm_offset + map_val];
+		*pin_p = mp->pin_map[cache_line_offset];
+	}
+}
+
+static struct jbusmc_dimm_group *jbusmc_find_dimm_group(unsigned long phys_addr)
+{
+	struct jbusmc *p;
+
+	list_for_each_entry(p, &mctrl_list, list) {
+		int i;
+
+		for (i = 0; i < p->num_dimm_groups; i++) {
+			struct jbusmc_dimm_group *dp = &p->dimm_groups[i];
+
+			if (phys_addr < dp->base_addr ||
+			    (dp->base_addr + dp->size) <= phys_addr)
+				continue;
+
+			return dp;
+		}
+	}
+	return NULL;
+}
+
+static int jbusmc_print_dimm(int syndrome_code,
+			     unsigned long phys_addr,
+			     char *buf, int buflen)
+{
+	struct jbusmc_obp_mem_layout *prop;
+	struct jbusmc_dimm_group *dp;
+	struct jbusmc *p;
+	int first_dimm;
+
+	dp = jbusmc_find_dimm_group(phys_addr);
+	if (dp == NULL ||
+	    syndrome_code < SYNDROME_MIN ||
+	    syndrome_code > SYNDROME_MAX) {
+		buf[0] = '?';
+		buf[1] = '?';
+		buf[2] = '?';
+		buf[3] = '\0';
+	}
+	p = dp->controller;
+	prop = &p->layout;
+
+	first_dimm = dp->index * JB_NUM_DIMMS_PER_GROUP;
+
+	if (syndrome_code != SYNDROME_MIN) {
+		char *dimm_str;
+		int pin;
+
+		get_pin_and_dimm_str(syndrome_code, phys_addr, &pin,
+				     &dimm_str, prop, first_dimm);
+		sprintf(buf, "%s, pin %3d", dimm_str, pin);
+	} else {
+		int dimm;
+
+		/* Multi-bit error, we just dump out all the
+		 * dimm labels associated with this dimm group.
+		 */
+		for (dimm = 0; dimm < JB_NUM_DIMMS_PER_GROUP; dimm++) {
+			sprintf(buf, "%s ",
+				prop->dimm_labels[first_dimm + dimm]);
+			buf += strlen(buf);
+		}
+	}
+
+	return 0;
+}
+
+static u64 __devinit jbusmc_dimm_group_size(u64 base,
+					    const struct linux_prom64_registers *mem_regs,
+					    int num_mem_regs)
+{
+	u64 max = base + (8UL * 1024 * 1024 * 1024);
+	u64 max_seen = base;
+	int i;
+
+	for (i = 0; i < num_mem_regs; i++) {
+		const struct linux_prom64_registers *ent;
+		u64 this_base;
+		u64 this_end;
+
+		ent = &mem_regs[i];
+		this_base = ent->phys_addr;
+		this_end = this_base + ent->reg_size;
+		if (base < this_base || base >= this_end)
+			continue;
+		if (this_end > max)
+			this_end = max;
+		if (this_end > max_seen)
+			max_seen = this_end;
+	}
+
+	return max_seen - base;
+}
+
+static void __devinit jbusmc_construct_one_dimm_group(struct jbusmc *p,
+						      unsigned long index,
+						      const struct linux_prom64_registers *mem_regs,
+						      int num_mem_regs)
+{
+	struct jbusmc_dimm_group *dp = &p->dimm_groups[index];
+
+	dp->controller = p;
+	dp->index = index;
+
+	dp->base_addr  = (p->portid * (64UL * 1024 * 1024 * 1024));
+	dp->base_addr += (index * (8UL * 1024 * 1024 * 1024));
+	dp->size = jbusmc_dimm_group_size(dp->base_addr, mem_regs, num_mem_regs);
+}
+
+static void __devinit jbusmc_construct_dimm_groups(struct jbusmc *p,
+						   const struct linux_prom64_registers *mem_regs,
+						   int num_mem_regs)
+{
+	if (p->mc_reg_1 & JB_MC_REG1_DIMM1_BANK0) {
+		jbusmc_construct_one_dimm_group(p, 0, mem_regs, num_mem_regs);
+		p->num_dimm_groups++;
+	}
+	if (p->mc_reg_1 & JB_MC_REG1_DIMM2_BANK2) {
+		jbusmc_construct_one_dimm_group(p, 1, mem_regs, num_mem_regs);
+		p->num_dimm_groups++;
+	}
+}
+
+static int __devinit jbusmc_probe(struct of_device *op,
+				  const struct of_device_id *match)
+{
+	const struct linux_prom64_registers *mem_regs;
+	struct device_node *mem_node;
+	int err, len, num_mem_regs;
+	struct jbusmc *p;
+	const u32 *prop;
+	const void *ml;
+
+	err = -ENODEV;
+	mem_node = of_find_node_by_path("/memory");
+	if (!mem_node) {
+		printk(KERN_ERR PFX "Cannot find /memory node.\n");
+		goto out;
+	}
+	mem_regs = of_get_property(mem_node, "reg", &len);
+	if (!mem_regs) {
+		printk(KERN_ERR PFX "Cannot get reg property of /memory node.\n");
+		goto out;
+	}
+	num_mem_regs = len / sizeof(*mem_regs);
+
+	err = -ENOMEM;
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p) {
+		printk(KERN_ERR PFX "Cannot allocate struct jbusmc.\n");
+		goto out;
+	}
+
+	INIT_LIST_HEAD(&p->list);
+
+	err = -ENODEV;
+	prop = of_get_property(op->node, "portid", &len);
+	if (!prop || len != 4) {
+		printk(KERN_ERR PFX "Cannot find portid.\n");
+		goto out_free;
+	}
+
+	p->portid = *prop;
+
+	prop = of_get_property(op->node, "memory-control-register-1", &len);
+	if (!prop || len != 8) {
+		printk(KERN_ERR PFX "Cannot get memory control register 1.\n");
+		goto out_free;
+	}
+
+	p->mc_reg_1 = ((u64)prop[0] << 32) | (u64) prop[1];
+
+	err = -ENOMEM;
+	p->regs = of_ioremap(&op->resource[0], 0, JBUSMC_REGS_SIZE, "jbusmc");
+	if (!p->regs) {
+		printk(KERN_ERR PFX "Cannot map jbusmc regs.\n");
+		goto out_free;
+	}
+
+	err = -ENODEV;
+	ml = of_get_property(op->node, "memory-layout", &p->layout_len);
+	if (!ml) {
+		printk(KERN_ERR PFX "Cannot get memory layout property.\n");
+		goto out_iounmap;
+	}
+	if (p->layout_len > sizeof(p->layout)) {
+		printk(KERN_ERR PFX "Unexpected memory-layout size %d\n",
+		       p->layout_len);
+		goto out_iounmap;
+	}
+	memcpy(&p->layout, ml, p->layout_len);
+
+	jbusmc_construct_dimm_groups(p, mem_regs, num_mem_regs);
+
+	mc_list_add(&p->list);
+
+	printk(KERN_INFO PFX "UltraSPARC-IIIi memory controller at %s\n",
+	       op->node->full_name);
+
+	dev_set_drvdata(&op->dev, p);
+
+	err = 0;
+
+out:
+	return err;
+
+out_iounmap:
+	of_iounmap(&op->resource[0], p->regs, JBUSMC_REGS_SIZE);
+
+out_free:
+	kfree(p);
+	goto out;
+}
+
 /* Does BANK decode PHYS_ADDR? */
-static int bank_match(struct bank_info *bp, unsigned long phys_addr)
+static int chmc_bank_match(struct chmc_bank_info *bp, unsigned long phys_addr)
 {
 	unsigned long upper_bits = (phys_addr & PA_UPPER_BITS) >> PA_UPPER_BITS_SHIFT;
 	unsigned long lower_bits = (phys_addr & PA_LOWER_BITS) >> PA_LOWER_BITS_SHIFT;
@@ -118,25 +515,18 @@ static int bank_match(struct bank_info *bp, unsigned long phys_addr)
 }
 
 /* Given PHYS_ADDR, search memory controller banks for a match. */
-static struct bank_info *find_bank(unsigned long phys_addr)
+static struct chmc_bank_info *chmc_find_bank(unsigned long phys_addr)
 {
-	struct list_head *mctrl_head = &mctrl_list;
-	struct list_head *mctrl_entry = mctrl_head->next;
+	struct chmc *p;
 
-	for (;;) {
-		struct mctrl_info *mp =
-			list_entry(mctrl_entry, struct mctrl_info, list);
+	list_for_each_entry(p, &mctrl_list, list) {
 		int bank_no;
 
-		if (mctrl_entry == mctrl_head)
-			break;
-		mctrl_entry = mctrl_entry->next;
-
 		for (bank_no = 0; bank_no < CHMCTRL_NBANKS; bank_no++) {
-			struct bank_info *bp;
+			struct chmc_bank_info *bp;
 
-			bp = &mp->logical_banks[bank_no];
-			if (bank_match(bp, phys_addr))
+			bp = &p->logical_banks[bank_no];
+			if (chmc_bank_match(bp, phys_addr))
 				return bp;
 		}
 	}
@@ -145,17 +535,15 @@ static struct bank_info *find_bank(unsigned long phys_addr)
 }
 
 /* This is the main purpose of this driver. */
-#define SYNDROME_MIN	-1
-#define SYNDROME_MAX	144
-int chmc_getunumber(int syndrome_code,
-		    unsigned long phys_addr,
-		    char *buf, int buflen)
+static int chmc_print_dimm(int syndrome_code,
+			   unsigned long phys_addr,
+			   char *buf, int buflen)
 {
-	struct bank_info *bp;
-	struct obp_mem_layout *prop;
+	struct chmc_bank_info *bp;
+	struct chmc_obp_mem_layout *prop;
 	int bank_in_controller, first_dimm;
 
-	bp = find_bank(phys_addr);
+	bp = chmc_find_bank(phys_addr);
 	if (bp == NULL ||
 	    syndrome_code < SYNDROME_MIN ||
 	    syndrome_code > SYNDROME_MAX) {
@@ -166,60 +554,18 @@ int chmc_getunumber(int syndrome_code,
 		return 0;
 	}
 
-	prop = &bp->mp->layout_prop;
+	prop = &bp->p->layout_prop;
 	bank_in_controller = bp->bank_id & (CHMCTRL_NBANKS - 1);
 	first_dimm  = (bank_in_controller & (CHMCTRL_NDGRPS - 1));
 	first_dimm *= CHMCTRL_NDIMMS;
 
 	if (syndrome_code != SYNDROME_MIN) {
-		struct obp_map *map;
-		int qword, where_in_line, where, map_index, map_offset;
-		unsigned int map_val;
+		char *dimm_str;
+		int pin;
 
-		/* Yaay, single bit error so we can figure out
-		 * the exact dimm.
-		 */
-		if (prop->symmetric)
-			map = &prop->map[0];
-		else
-			map = &prop->map[1];
-
-		/* Covert syndrome code into the way the bits are
-		 * positioned on the bus.
-		 */
-		if (syndrome_code < 144 - 16)
-			syndrome_code += 16;
-		else if (syndrome_code < 144)
-			syndrome_code -= (144 - 7);
-		else if (syndrome_code < (144 + 3))
-			syndrome_code -= (144 + 3 - 4);
-		else
-			syndrome_code -= 144 + 3;
-
-		/* All this magic has to do with how a cache line
-		 * comes over the wire on Safari.  A 64-bit line
-		 * comes over in 4 quadword cycles, each of which
-		 * transmit ECC/MTAG info as well as the actual
-		 * data.  144 bits per quadword, 576 total.
-		 */
-#define LINE_SIZE	64
-#define LINE_ADDR_MSK	(LINE_SIZE - 1)
-#define QW_PER_LINE	4
-#define QW_BYTES	(LINE_SIZE / QW_PER_LINE)
-#define QW_BITS		144
-#define LAST_BIT	(576 - 1)
-
-		qword = (phys_addr & LINE_ADDR_MSK) / QW_BYTES;
-		where_in_line = ((3 - qword) * QW_BITS) + syndrome_code;
-		where = (LAST_BIT - where_in_line);
-		map_index = where >> 2;
-		map_offset = where & 0x3;
-		map_val = map->dimm_map[map_index];
-		map_val = ((map_val >> ((3 - map_offset) << 1)) & (2 - 1));
-
-		sprintf(buf, "%s, pin %3d",
-			prop->dimm_labels[first_dimm + map_val],
-			map->pin_map[where_in_line]);
+		get_pin_and_dimm_str(syndrome_code, phys_addr, &pin,
+				     &dimm_str, prop, first_dimm);
+		sprintf(buf, "%s, pin %3d", dimm_str, pin);
 	} else {
 		int dimm;
 
@@ -240,7 +586,7 @@ int chmc_getunumber(int syndrome_code,
  * the code is executing, you must use special ASI load/store else
  * you go through the global mapping.
  */
-static u64 read_mcreg(struct mctrl_info *mp, unsigned long offset)
+static u64 chmc_read_mcreg(struct chmc *p, unsigned long offset)
 {
 	unsigned long ret, this_cpu;
 
@@ -248,14 +594,14 @@ static u64 read_mcreg(struct mctrl_info *mp, unsigned long offset)
 
 	this_cpu = real_hard_smp_processor_id();
 
-	if (mp->portid == this_cpu) {
+	if (p->portid == this_cpu) {
 		__asm__ __volatile__("ldxa	[%1] %2, %0"
 				     : "=r" (ret)
 				     : "r" (offset), "i" (ASI_MCU_CTRL_REG));
 	} else {
 		__asm__ __volatile__("ldxa	[%1] %2, %0"
 				     : "=r" (ret)
-				     : "r" (mp->regs + offset),
+				     : "r" (p->regs + offset),
 				       "i" (ASI_PHYS_BYPASS_EC_E));
 	}
 
@@ -265,178 +611,253 @@ static u64 read_mcreg(struct mctrl_info *mp, unsigned long offset)
 }
 
 #if 0 /* currently unused */
-static void write_mcreg(struct mctrl_info *mp, unsigned long offset, u64 val)
+static void chmc_write_mcreg(struct chmc *p, unsigned long offset, u64 val)
 {
-	if (mp->portid == smp_processor_id()) {
+	if (p->portid == smp_processor_id()) {
 		__asm__ __volatile__("stxa	%0, [%1] %2"
 				     : : "r" (val),
 				         "r" (offset), "i" (ASI_MCU_CTRL_REG));
 	} else {
 		__asm__ __volatile__("ldxa	%0, [%1] %2"
 				     : : "r" (val),
-				         "r" (mp->regs + offset),
+				         "r" (p->regs + offset),
 				         "i" (ASI_PHYS_BYPASS_EC_E));
 	}
 }
 #endif
 
-static void interpret_one_decode_reg(struct mctrl_info *mp, int which_bank, u64 val)
+static void chmc_interpret_one_decode_reg(struct chmc *p, int which_bank, u64 val)
 {
-	struct bank_info *p = &mp->logical_banks[which_bank];
-
-	p->mp = mp;
-	p->bank_id = (CHMCTRL_NBANKS * mp->portid) + which_bank;
-	p->raw_reg = val;
-	p->valid = (val & MEM_DECODE_VALID) >> MEM_DECODE_VALID_SHIFT;
-	p->uk = (val & MEM_DECODE_UK) >> MEM_DECODE_UK_SHIFT;
-	p->um = (val & MEM_DECODE_UM) >> MEM_DECODE_UM_SHIFT;
-	p->lk = (val & MEM_DECODE_LK) >> MEM_DECODE_LK_SHIFT;
-	p->lm = (val & MEM_DECODE_LM) >> MEM_DECODE_LM_SHIFT;
-
-	p->base  =  (p->um);
-	p->base &= ~(p->uk);
-	p->base <<= PA_UPPER_BITS_SHIFT;
-
-	switch(p->lk) {
+	struct chmc_bank_info *bp = &p->logical_banks[which_bank];
+
+	bp->p = p;
+	bp->bank_id = (CHMCTRL_NBANKS * p->portid) + which_bank;
+	bp->raw_reg = val;
+	bp->valid = (val & MEM_DECODE_VALID) >> MEM_DECODE_VALID_SHIFT;
+	bp->uk = (val & MEM_DECODE_UK) >> MEM_DECODE_UK_SHIFT;
+	bp->um = (val & MEM_DECODE_UM) >> MEM_DECODE_UM_SHIFT;
+	bp->lk = (val & MEM_DECODE_LK) >> MEM_DECODE_LK_SHIFT;
+	bp->lm = (val & MEM_DECODE_LM) >> MEM_DECODE_LM_SHIFT;
+
+	bp->base  =  (bp->um);
+	bp->base &= ~(bp->uk);
+	bp->base <<= PA_UPPER_BITS_SHIFT;
+
+	switch(bp->lk) {
 	case 0xf:
 	default:
-		p->interleave = 1;
+		bp->interleave = 1;
 		break;
 
 	case 0xe:
-		p->interleave = 2;
+		bp->interleave = 2;
 		break;
 
 	case 0xc:
-		p->interleave = 4;
+		bp->interleave = 4;
 		break;
 
 	case 0x8:
-		p->interleave = 8;
+		bp->interleave = 8;
 		break;
 
 	case 0x0:
-		p->interleave = 16;
+		bp->interleave = 16;
 		break;
 	};
 
 	/* UK[10] is reserved, and UK[11] is not set for the SDRAM
 	 * bank size definition.
 	 */
-	p->size = (((unsigned long)p->uk &
-		    ((1UL << 10UL) - 1UL)) + 1UL) << PA_UPPER_BITS_SHIFT;
-	p->size /= p->interleave;
+	bp->size = (((unsigned long)bp->uk &
+		     ((1UL << 10UL) - 1UL)) + 1UL) << PA_UPPER_BITS_SHIFT;
+	bp->size /= bp->interleave;
 }
 
-static void fetch_decode_regs(struct mctrl_info *mp)
+static void chmc_fetch_decode_regs(struct chmc *p)
 {
-	if (mp->layout_size == 0)
+	if (p->layout_size == 0)
 		return;
 
-	interpret_one_decode_reg(mp, 0,
-				 read_mcreg(mp, CHMCTRL_DECODE1));
-	interpret_one_decode_reg(mp, 1,
-				 read_mcreg(mp, CHMCTRL_DECODE2));
-	interpret_one_decode_reg(mp, 2,
-				 read_mcreg(mp, CHMCTRL_DECODE3));
-	interpret_one_decode_reg(mp, 3,
-				 read_mcreg(mp, CHMCTRL_DECODE4));
+	chmc_interpret_one_decode_reg(p, 0,
+				      chmc_read_mcreg(p, CHMCTRL_DECODE1));
+	chmc_interpret_one_decode_reg(p, 1,
+				      chmc_read_mcreg(p, CHMCTRL_DECODE2));
+	chmc_interpret_one_decode_reg(p, 2,
+				      chmc_read_mcreg(p, CHMCTRL_DECODE3));
+	chmc_interpret_one_decode_reg(p, 3,
+				      chmc_read_mcreg(p, CHMCTRL_DECODE4));
 }
 
-static int init_one_mctrl(struct device_node *dp)
+static int __devinit chmc_probe(struct of_device *op,
+				const struct of_device_id *match)
 {
-	struct mctrl_info *mp = kzalloc(sizeof(*mp), GFP_KERNEL);
-	int portid = of_getintprop_default(dp, "portid", -1);
-	const struct linux_prom64_registers *regs;
+	struct device_node *dp = op->node;
+	unsigned long ver;
 	const void *pval;
-	int len;
+	int len, portid;
+	struct chmc *p;
+	int err;
+
+	err = -ENODEV;
+	__asm__ ("rdpr %%ver, %0" : "=r" (ver));
+	if ((ver >> 32UL) == __JALAPENO_ID ||
+	    (ver >> 32UL) == __SERRANO_ID)
+		goto out;
 
-	if (!mp)
-		return -1;
+	portid = of_getintprop_default(dp, "portid", -1);
 	if (portid == -1)
-		goto fail;
+		goto out;
 
-	mp->portid = portid;
 	pval = of_get_property(dp, "memory-layout", &len);
-	mp->layout_size = len;
-	if (!pval)
-		mp->layout_size = 0;
-	else {
-		if (mp->layout_size > sizeof(mp->layout_prop))
-			goto fail;
-		memcpy(&mp->layout_prop, pval, len);
+	if (pval && len > sizeof(p->layout_prop)) {
+		printk(KERN_ERR PFX "Unexpected memory-layout property "
+		       "size %d.\n", len);
+		goto out;
 	}
 
-	regs = of_get_property(dp, "reg", NULL);
-	if (!regs || regs->reg_size != 0x48)
-		goto fail;
+	err = -ENOMEM;
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p) {
+		printk(KERN_ERR PFX "Could not allocate struct chmc.\n");
+		goto out;
+	}
 
-	mp->regs = ioremap(regs->phys_addr, regs->reg_size);
-	if (mp->regs == NULL)
-		goto fail;
+	p->portid = portid;
+	p->layout_size = len;
+	if (!pval)
+		p->layout_size = 0;
+	else
+		memcpy(&p->layout_prop, pval, len);
+
+	p->regs = of_ioremap(&op->resource[0], 0, 0x48, "chmc");
+	if (!p->regs) {
+		printk(KERN_ERR PFX "Could not map registers.\n");
+		goto out_free;
+	}
 
-	if (mp->layout_size != 0UL) {
-		mp->timing_control1 = read_mcreg(mp, CHMCTRL_TCTRL1);
-		mp->timing_control2 = read_mcreg(mp, CHMCTRL_TCTRL2);
-		mp->timing_control3 = read_mcreg(mp, CHMCTRL_TCTRL3);
-		mp->timing_control4 = read_mcreg(mp, CHMCTRL_TCTRL4);
-		mp->memaddr_control = read_mcreg(mp, CHMCTRL_MACTRL);
+	if (p->layout_size != 0UL) {
+		p->timing_control1 = chmc_read_mcreg(p, CHMCTRL_TCTRL1);
+		p->timing_control2 = chmc_read_mcreg(p, CHMCTRL_TCTRL2);
+		p->timing_control3 = chmc_read_mcreg(p, CHMCTRL_TCTRL3);
+		p->timing_control4 = chmc_read_mcreg(p, CHMCTRL_TCTRL4);
+		p->memaddr_control = chmc_read_mcreg(p, CHMCTRL_MACTRL);
 	}
 
-	fetch_decode_regs(mp);
+	chmc_fetch_decode_regs(p);
 
-	list_add(&mp->list, &mctrl_list);
+	mc_list_add(&p->list);
 
-	/* Report the device. */
-	printk(KERN_INFO "%s: US3 memory controller at %p [%s]\n",
+	printk(KERN_INFO PFX "UltraSPARC-III memory controller at %s [%s]\n",
 	       dp->full_name,
-	       mp->regs, (mp->layout_size ? "ACTIVE" : "INACTIVE"));
+	       (p->layout_size ? "ACTIVE" : "INACTIVE"));
 
-	return 0;
+	dev_set_drvdata(&op->dev, p);
+
+	err = 0;
+
+out:
+	return err;
+
+out_free:
+	kfree(p);
+	goto out;
+}
 
-fail:
-	if (mp) {
-		if (mp->regs != NULL)
-			iounmap(mp->regs);
-		kfree(mp);
+static int __devinit us3mc_probe(struct of_device *op,
+				const struct of_device_id *match)
+{
+	if (mc_type == MC_TYPE_SAFARI)
+		return chmc_probe(op, match);
+	else if (mc_type == MC_TYPE_JBUS)
+		return jbusmc_probe(op, match);
+	return -ENODEV;
+}
+
+static void __devexit chmc_destroy(struct of_device *op, struct chmc *p)
+{
+	list_del(&p->list);
+	of_iounmap(&op->resource[0], p->regs, 0x48);
+	kfree(p);
+}
+
+static void __devexit jbusmc_destroy(struct of_device *op, struct jbusmc *p)
+{
+	mc_list_del(&p->list);
+	of_iounmap(&op->resource[0], p->regs, JBUSMC_REGS_SIZE);
+	kfree(p);
+}
+
+static int __devexit us3mc_remove(struct of_device *op)
+{
+	void *p = dev_get_drvdata(&op->dev);
+
+	if (p) {
+		if (mc_type == MC_TYPE_SAFARI)
+			chmc_destroy(op, p);
+		else if (mc_type == MC_TYPE_JBUS)
+			jbusmc_destroy(op, p);
 	}
-	return -1;
+	return 0;
+}
+
+static const struct of_device_id us3mc_match[] = {
+	{
+		.name = "memory-controller",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, us3mc_match);
+
+static struct of_platform_driver us3mc_driver = {
+	.name		= "us3mc",
+	.match_table	= us3mc_match,
+	.probe		= us3mc_probe,
+	.remove		= __devexit_p(us3mc_remove),
+};
+
+static inline bool us3mc_platform(void)
+{
+	if (tlb_type == cheetah || tlb_type == cheetah_plus)
+		return true;
+	return false;
 }
 
-static int __init chmc_init(void)
+static int __init us3mc_init(void)
 {
-	struct device_node *dp;
+	unsigned long ver;
+	int ret;
 
-	/* This driver is only for cheetah platforms. */
-	if (tlb_type != cheetah && tlb_type != cheetah_plus)
+	if (!us3mc_platform())
 		return -ENODEV;
 
-	for_each_node_by_name(dp, "memory-controller")
-		init_one_mctrl(dp);
+	__asm__ __volatile__("rdpr %%ver, %0" : "=r" (ver));
+	if ((ver >> 32UL) == __JALAPENO_ID ||
+	    (ver >> 32UL) == __SERRANO_ID) {
+		mc_type = MC_TYPE_JBUS;
+		us3mc_dimm_printer = jbusmc_print_dimm;
+	} else {
+		mc_type = MC_TYPE_SAFARI;
+		us3mc_dimm_printer = chmc_print_dimm;
+	}
 
-	for_each_node_by_name(dp, "mc-us3")
-		init_one_mctrl(dp);
+	ret = register_dimm_printer(us3mc_dimm_printer);
 
-	return 0;
+	if (!ret) {
+		ret = of_register_driver(&us3mc_driver, &of_bus_type);
+		if (ret)
+			unregister_dimm_printer(us3mc_dimm_printer);
+	}
+	return ret;
 }
 
-static void __exit chmc_cleanup(void)
+static void __exit us3mc_cleanup(void)
 {
-	struct list_head *head = &mctrl_list;
-	struct list_head *tmp = head->next;
-
-	for (;;) {
-		struct mctrl_info *p =
-			list_entry(tmp, struct mctrl_info, list);
-		if (tmp == head)
-			break;
-		tmp = tmp->next;
-
-		list_del(&p->list);
-		iounmap(p->regs);
-		kfree(p);
+	if (us3mc_platform()) {
+		unregister_dimm_printer(us3mc_dimm_printer);
+		of_unregister_driver(&us3mc_driver);
 	}
 }
 
-module_init(chmc_init);
-module_exit(chmc_cleanup);
+module_init(us3mc_init);
+module_exit(us3mc_cleanup);
diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c
index 0097c08..0c9ac83 100644
--- a/arch/sparc64/kernel/cpu.c
+++ b/arch/sparc64/kernel/cpu.c
@@ -1,7 +1,7 @@
 /* cpu.c: Dinky routines to look for the kind of Sparc cpu
  *        we are on.
  *
- * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996, 2007, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/kernel.h>
@@ -19,53 +19,86 @@
 
 DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 };
 
-struct cpu_iu_info {
-  short manuf;
-  short impl;
-  char* cpu_name;   /* should be enough I hope... */
+struct cpu_chip_info {
+	unsigned short	manuf;
+	unsigned short	impl;
+	const char	*cpu_name;
+	const char	*fp_name;
 };
 
-struct cpu_fp_info {
-  short manuf;
-  short impl;
-  char fpu_vers;
-  char* fp_name;
+static const struct cpu_chip_info cpu_chips[] = {
+	{
+		.manuf		= 0x17,
+		.impl		= 0x10,
+		.cpu_name	= "TI UltraSparc I   (SpitFire)",
+		.fp_name	= "UltraSparc I integrated FPU",
+	},
+	{
+		.manuf		= 0x22,
+		.impl		= 0x10,
+		.cpu_name	= "TI UltraSparc I   (SpitFire)",
+		.fp_name	= "UltraSparc I integrated FPU",
+	},
+	{
+		.manuf		= 0x17,
+		.impl		= 0x11,
+		.cpu_name	= "TI UltraSparc II  (BlackBird)",
+		.fp_name	= "UltraSparc II integrated FPU",
+	},
+	{
+		.manuf		= 0x17,
+		.impl		= 0x12,
+		.cpu_name	= "TI UltraSparc IIi (Sabre)",
+		.fp_name	= "UltraSparc IIi integrated FPU",
+	},
+	{
+		.manuf		= 0x17,
+		.impl		= 0x13,
+		.cpu_name	= "TI UltraSparc IIe (Hummingbird)",
+		.fp_name	= "UltraSparc IIe integrated FPU",
+	},
+	{
+		.manuf		= 0x3e,
+		.impl		= 0x14,
+		.cpu_name	= "TI UltraSparc III (Cheetah)",
+		.fp_name	= "UltraSparc III integrated FPU",
+	},
+	{
+		.manuf		= 0x3e,
+		.impl		= 0x15,
+		.cpu_name	= "TI UltraSparc III+ (Cheetah+)",
+		.fp_name	= "UltraSparc III+ integrated FPU",
+	},
+	{
+		.manuf		= 0x3e,
+		.impl		= 0x16,
+		.cpu_name	= "TI UltraSparc IIIi (Jalapeno)",
+		.fp_name	= "UltraSparc IIIi integrated FPU",
+	},
+	{
+		.manuf		= 0x3e,
+		.impl		= 0x18,
+		.cpu_name	= "TI UltraSparc IV (Jaguar)",
+		.fp_name	= "UltraSparc IV integrated FPU",
+	},
+	{
+		.manuf		= 0x3e,
+		.impl		= 0x19,
+		.cpu_name	= "TI UltraSparc IV+ (Panther)",
+		.fp_name	= "UltraSparc IV+ integrated FPU",
+	},
+	{
+		.manuf		= 0x3e,
+		.impl		= 0x22,
+		.cpu_name	= "TI UltraSparc IIIi+ (Serrano)",
+		.fp_name	= "UltraSparc IIIi+ integrated FPU",
+	},
 };
 
-static struct cpu_fp_info linux_sparc_fpu[] = {
-  { 0x17, 0x10, 0, "UltraSparc I integrated FPU"},
-  { 0x22, 0x10, 0, "UltraSparc I integrated FPU"},
-  { 0x17, 0x11, 0, "UltraSparc II integrated FPU"},
-  { 0x17, 0x12, 0, "UltraSparc IIi integrated FPU"},
-  { 0x17, 0x13, 0, "UltraSparc IIe integrated FPU"},
-  { 0x3e, 0x14, 0, "UltraSparc III integrated FPU"},
-  { 0x3e, 0x15, 0, "UltraSparc III+ integrated FPU"},
-  { 0x3e, 0x16, 0, "UltraSparc IIIi integrated FPU"},
-  { 0x3e, 0x18, 0, "UltraSparc IV integrated FPU"},
-  { 0x3e, 0x19, 0, "UltraSparc IV+ integrated FPU"},
-  { 0x3e, 0x22, 0, "UltraSparc IIIi+ integrated FPU"},
-};
-
-#define NSPARCFPU  ARRAY_SIZE(linux_sparc_fpu)
-
-static struct cpu_iu_info linux_sparc_chips[] = {
-  { 0x17, 0x10, "TI UltraSparc I   (SpitFire)"},
-  { 0x22, 0x10, "TI UltraSparc I   (SpitFire)"},
-  { 0x17, 0x11, "TI UltraSparc II  (BlackBird)"},
-  { 0x17, 0x12, "TI UltraSparc IIi (Sabre)"},
-  { 0x17, 0x13, "TI UltraSparc IIe (Hummingbird)"},
-  { 0x3e, 0x14, "TI UltraSparc III (Cheetah)"},
-  { 0x3e, 0x15, "TI UltraSparc III+ (Cheetah+)"},
-  { 0x3e, 0x16, "TI UltraSparc IIIi (Jalapeno)"},
-  { 0x3e, 0x18, "TI UltraSparc IV (Jaguar)"},
-  { 0x3e, 0x19, "TI UltraSparc IV+ (Panther)"},
-  { 0x3e, 0x22, "TI UltraSparc IIIi+ (Serrano)"},
-};
+#define NSPARCCHIPS ARRAY_SIZE(linux_sparc_chips)
 
-#define NSPARCCHIPS  ARRAY_SIZE(linux_sparc_chips)
-
-char *sparc_cpu_type;
-char *sparc_fpu_type;
+const char *sparc_cpu_type;
+const char *sparc_fpu_type;
 
 static void __init sun4v_cpu_probe(void)
 {
@@ -89,68 +122,45 @@ static void __init sun4v_cpu_probe(void)
 	}
 }
 
-void __init cpu_probe(void)
+static const struct cpu_chip_info * __init find_cpu_chip(unsigned short manuf,
+							 unsigned short impl)
 {
-	unsigned long ver, fpu_vers, manuf, impl, fprs;
 	int i;
-	
-	if (tlb_type == hypervisor) {
-		sun4v_cpu_probe();
-		return;
-	}
 
-	fprs = fprs_read();
-	fprs_write(FPRS_FEF);
-	__asm__ __volatile__ ("rdpr %%ver, %0; stx %%fsr, [%1]"
-			      : "=&r" (ver)
-			      : "r" (&fpu_vers));
-	fprs_write(fprs);
-	
-	manuf = ((ver >> 48) & 0xffff);
-	impl = ((ver >> 32) & 0xffff);
-
-	fpu_vers = ((fpu_vers >> 17) & 0x7);
-
-retry:
-	for (i = 0; i < NSPARCCHIPS; i++) {
-		if (linux_sparc_chips[i].manuf == manuf) {
-			if (linux_sparc_chips[i].impl == impl) {
-				sparc_cpu_type =
-					linux_sparc_chips[i].cpu_name;
-				break;
-			}
-		}
-	}
+	for (i = 0; i < ARRAY_SIZE(cpu_chips); i++) {
+		const struct cpu_chip_info *p = &cpu_chips[i];
 
-	if (i == NSPARCCHIPS) {
- 		/* Maybe it is a cheetah+ derivative, report it as cheetah+
- 		 * in that case until we learn the real names.
- 		 */
- 		if (manuf == 0x3e &&
- 		    impl > 0x15) {
- 			impl = 0x15;
- 			goto retry;
- 		} else {
- 			printk("DEBUG: manuf[%lx] impl[%lx]\n",
- 			       manuf, impl);
- 		}
-		sparc_cpu_type = "Unknown CPU";
+		if (p->manuf == manuf && p->impl == impl)
+			return p;
 	}
+	return NULL;
+}
 
-	for (i = 0; i < NSPARCFPU; i++) {
-		if (linux_sparc_fpu[i].manuf == manuf &&
-		    linux_sparc_fpu[i].impl == impl) {
-			if (linux_sparc_fpu[i].fpu_vers == fpu_vers) {
-				sparc_fpu_type =
-					linux_sparc_fpu[i].fp_name;
-				break;
-			}
+static int __init cpu_type_probe(void)
+{
+	if (tlb_type == hypervisor) {
+		sun4v_cpu_probe();
+	} else {
+		unsigned long ver, manuf, impl;
+		const struct cpu_chip_info *p;
+	
+		__asm__ __volatile__("rdpr %%ver, %0" : "=r" (ver));
+	
+		manuf = ((ver >> 48) & 0xffff);
+		impl = ((ver >> 32) & 0xffff);
+
+		p = find_cpu_chip(manuf, impl);
+		if (p) {
+			sparc_cpu_type = p->cpu_name;
+			sparc_fpu_type = p->fp_name;
+		} else {
+			printk(KERN_ERR "CPU: Unknown chip, manuf[%lx] impl[%lx]\n",
+			       manuf, impl);
+			sparc_cpu_type = "Unknown CPU";
+			sparc_fpu_type = "Unknown FPU";
 		}
 	}
-
-	if (i == NSPARCFPU) {
- 		printk("DEBUG: manuf[%lx] impl[%lx] fsr.vers[%lx]\n",
- 		       manuf, impl, fpu_vers);
-		sparc_fpu_type = "Unknown FPU";
-	}
+	return 0;
 }
+
+arch_initcall(cpu_type_probe);
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index d0fa5aa..f52e053 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -1,6 +1,6 @@
 /* ds.c: Domain Services driver for Logical Domains
  *
- * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2007, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
@@ -1217,7 +1217,7 @@ static int ds_remove(struct vio_dev *vdev)
 	return 0;
 }
 
-static struct vio_device_id ds_match[] = {
+static struct vio_device_id __initdata ds_match[] = {
 	{
 		.type = "domain-services-port",
 	},
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index 60d36d1..77dbf6d 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -1,5 +1,4 @@
-/*
- * ebus.c: PCI to EBus bridge device.
+/* ebus.c: EBUS DMA library code.
  *
  * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
  * Copyright (C) 1999  David S. Miller (davem@redhat.com)
@@ -9,23 +8,11 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/of_device.h>
-
-#include <asm/system.h>
-#include <asm/page.h>
-#include <asm/ebus.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/bpp.h>
-#include <asm/irq.h>
-#include <asm/io.h>
 
-/* EBUS dma library. */
+#include <asm/ebus_dma.h>
+#include <asm/io.h>
 
 #define EBDMA_CSR	0x00UL	/* Control/Status */
 #define EBDMA_ADDR	0x04UL	/* DMA Address */
@@ -268,283 +255,3 @@ void ebus_dma_enable(struct ebus_dma_info *p, int on)
 	spin_unlock_irqrestore(&p->lock, flags);
 }
 EXPORT_SYMBOL(ebus_dma_enable);
-
-struct linux_ebus *ebus_chain = NULL;
-
-static inline void *ebus_alloc(size_t size)
-{
-	void *mem;
-
-	mem = kzalloc(size, GFP_ATOMIC);
-	if (!mem)
-		panic("ebus_alloc: out of memory");
-	return mem;
-}
-
-static void __init fill_ebus_child(struct device_node *dp,
-				   struct linux_ebus_child *dev,
-				   int non_standard_regs)
-{
-	struct of_device *op;
-	const int *regs;
-	int i, len;
-
-	dev->prom_node = dp;
-	printk(" (%s)", dp->name);
-
-	regs = of_get_property(dp, "reg", &len);
-	if (!regs)
-		dev->num_addrs = 0;
-	else
-		dev->num_addrs = len / sizeof(regs[0]);
-
-	if (non_standard_regs) {
-		/* This is to handle reg properties which are not
-		 * in the parent relative format.  One example are
-		 * children of the i2c device on CompactPCI systems.
-		 *
-		 * So, for such devices we just record the property
-		 * raw in the child resources.
-		 */
-		for (i = 0; i < dev->num_addrs; i++)
-			dev->resource[i].start = regs[i];
-	} else {
-		for (i = 0; i < dev->num_addrs; i++) {
-			int rnum = regs[i];
-			if (rnum >= dev->parent->num_addrs) {
-				prom_printf("UGH: property for %s was %d, need < %d\n",
-					    dp->name, len, dev->parent->num_addrs);
-				prom_halt();
-			}
-			dev->resource[i].start = dev->parent->resource[i].start;
-			dev->resource[i].end = dev->parent->resource[i].end;
-			dev->resource[i].flags = IORESOURCE_MEM;
-			dev->resource[i].name = dp->name;
-		}
-	}
-
-	op = of_find_device_by_node(dp);
-	if (!op) {
-		dev->num_irqs = 0;
-	} else {
-		dev->num_irqs = op->num_irqs;
-		for (i = 0; i < dev->num_irqs; i++)
-			dev->irqs[i] = op->irqs[i];
-	}
-
-	if (!dev->num_irqs) {
-		/*
-		 * Oh, well, some PROMs don't export interrupts
-		 * property to children of EBus devices...
-		 *
-		 * Be smart about PS/2 keyboard and mouse.
-		 */
-		if (!strcmp(dev->parent->prom_node->name, "8042")) {
-			if (!strcmp(dev->prom_node->name, "kb_ps2")) {
-				dev->num_irqs = 1;
-				dev->irqs[0] = dev->parent->irqs[0];
-			} else {
-				dev->num_irqs = 1;
-				dev->irqs[0] = dev->parent->irqs[1];
-			}
-		}
-	}
-}
-
-static int __init child_regs_nonstandard(struct linux_ebus_device *dev)
-{
-	if (!strcmp(dev->prom_node->name, "i2c") ||
-	    !strcmp(dev->prom_node->name, "SUNW,lombus"))
-		return 1;
-	return 0;
-}
-
-static void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *dev)
-{
-	struct linux_ebus_child *child;
-	struct dev_archdata *sd;
-	struct of_device *op;
-	int i, len;
-
-	dev->prom_node = dp;
-
-	printk(" [%s", dp->name);
-
-	op = of_find_device_by_node(dp);
-	if (!op) {
-		dev->num_addrs = 0;
-		dev->num_irqs = 0;
-	} else {
-		const int *regs = of_get_property(dp, "reg", &len);
-
-		if (!regs)
-			len = 0;
-		dev->num_addrs = len / sizeof(struct linux_prom_registers);
-
-		for (i = 0; i < dev->num_addrs; i++)
-			memcpy(&dev->resource[i],
-			       &op->resource[i],
-			       sizeof(struct resource));
-
-		dev->num_irqs = op->num_irqs;
-		for (i = 0; i < dev->num_irqs; i++)
-			dev->irqs[i] = op->irqs[i];
-	}
-
-	sd = &dev->ofdev.dev.archdata;
-	sd->prom_node = dp;
-	sd->op = &dev->ofdev;
-	sd->iommu = dev->bus->ofdev.dev.parent->archdata.iommu;
-	sd->stc = dev->bus->ofdev.dev.parent->archdata.stc;
-	sd->numa_node = dev->bus->ofdev.dev.parent->archdata.numa_node;
-
-	dev->ofdev.node = dp;
-	dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
-	dev->ofdev.dev.bus = &ebus_bus_type;
-	dev_set_name(&dev->ofdev.dev, "ebus[%08x]", dp->node);
-
-	/* Register with core */
-	if (of_device_register(&dev->ofdev) != 0)
-		printk(KERN_DEBUG "ebus: device registration error for %s!\n",
-		       dp->path_component_name);
-
-	dp = dp->child;
-	if (dp) {
-		printk(" ->");
-		dev->children = ebus_alloc(sizeof(struct linux_ebus_child));
-
-		child = dev->children;
-		child->next = NULL;
-		child->parent = dev;
-		child->bus = dev->bus;
-		fill_ebus_child(dp, child,
-				child_regs_nonstandard(dev));
-
-		while ((dp = dp->sibling) != NULL) {
-			child->next = ebus_alloc(sizeof(struct linux_ebus_child));
-
-			child = child->next;
-			child->next = NULL;
-			child->parent = dev;
-			child->bus = dev->bus;
-			fill_ebus_child(dp, child,
-					child_regs_nonstandard(dev));
-		}
-	}
-	printk("]");
-}
-
-static struct pci_dev *find_next_ebus(struct pci_dev *start, int *is_rio_p)
-{
-	struct pci_dev *pdev = start;
-
-	while ((pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_ANY_ID, pdev)))
-		if (pdev->device == PCI_DEVICE_ID_SUN_EBUS ||
-			pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS)
-			break;
-
-	*is_rio_p = !!(pdev && (pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS));
-
-	return pdev;
-}
-
-void __init ebus_init(void)
-{
-	struct linux_ebus_device *dev;
-	struct linux_ebus *ebus;
-	struct pci_dev *pdev;
-	struct device_node *dp;
-	int is_rio;
-	int num_ebus = 0;
-
-	pdev = find_next_ebus(NULL, &is_rio);
-	if (!pdev) {
-		printk("ebus: No EBus's found.\n");
-		return;
-	}
-
-	dp = pci_device_to_OF_node(pdev);
-
-	ebus_chain = ebus = ebus_alloc(sizeof(struct linux_ebus));
-	ebus->next = NULL;
-	ebus->is_rio = is_rio;
-
-	while (dp) {
-		struct device_node *child;
-
-		/* SUNW,pci-qfe uses four empty ebuses on it.
-		   I think we should not consider them here,
-		   as they have half of the properties this
-		   code expects and once we do PCI hot-plug,
-		   we'd have to tweak with the ebus_chain
-		   in the runtime after initialization. -jj */
-		if (!dp->child) {
-			pdev = find_next_ebus(pdev, &is_rio);
-			if (!pdev) {
-				if (ebus == ebus_chain) {
-					ebus_chain = NULL;
-					printk("ebus: No EBus's found.\n");
-					return;
-				}
-				break;
-			}
-			ebus->is_rio = is_rio;
-			dp = pci_device_to_OF_node(pdev);
-			continue;
-		}
-		printk("ebus%d:", num_ebus);
-
-		ebus->index = num_ebus;
-		ebus->prom_node = dp;
-		ebus->self = pdev;
-
-		ebus->ofdev.node = dp;
-		ebus->ofdev.dev.parent = &pdev->dev;
-		ebus->ofdev.dev.bus = &ebus_bus_type;
-		dev_set_name(&ebus->ofdev.dev, "ebus%d", num_ebus);
-
-		/* Register with core */
-		if (of_device_register(&ebus->ofdev) != 0)
-			printk(KERN_DEBUG "ebus: device registration error for %s!\n",
-			       dp->path_component_name);
-
-
-		child = dp->child;
-		if (!child)
-			goto next_ebus;
-
-		ebus->devices = ebus_alloc(sizeof(struct linux_ebus_device));
-
-		dev = ebus->devices;
-		dev->next = NULL;
-		dev->children = NULL;
-		dev->bus = ebus;
-		fill_ebus_device(child, dev);
-
-		while ((child = child->sibling) != NULL) {
-			dev->next = ebus_alloc(sizeof(struct linux_ebus_device));
-
-			dev = dev->next;
-			dev->next = NULL;
-			dev->children = NULL;
-			dev->bus = ebus;
-			fill_ebus_device(child, dev);
-		}
-
-	next_ebus:
-		printk("\n");
-
-		pdev = find_next_ebus(pdev, &is_rio);
-		if (!pdev)
-			break;
-
-		dp = pci_device_to_OF_node(pdev);
-
-		ebus->next = ebus_alloc(sizeof(struct linux_ebus));
-		ebus = ebus->next;
-		ebus->next = NULL;
-		ebus->is_rio = is_rio;
-		++num_ebus;
-	}
-	pci_dev_put(pdev); /* XXX for the case, when ebusnd is 0, is it OK? */
-}
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
index fc294a2..34d7ab5 100644
--- a/arch/sparc64/kernel/entry.h
+++ b/arch/sparc64/kernel/entry.h
@@ -5,8 +5,8 @@
 #include <linux/types.h>
 #include <linux/init.h>
 
-extern char *sparc_cpu_type;
-extern char *sparc_fpu_type;
+extern const char *sparc_cpu_type;
+extern const char *sparc_fpu_type;
 
 extern void __init per_cpu_patch(void);
 extern void __init sun4v_patch(void);
@@ -22,7 +22,8 @@ extern void do_notify_resume(struct pt_regs *regs,
 			     unsigned long orig_i0,
 			     unsigned long thread_info_flags);
 
-extern asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p);
+extern asmlinkage int syscall_trace_enter(struct pt_regs *regs);
+extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
 
 extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
 
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index c9afef0..353226f 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -10,6 +10,7 @@
 #include <linux/errno.h>
 #include <linux/threads.h>
 #include <linux/init.h>
+#include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/asi.h>
 #include <asm/pstate.h>
diff --git a/arch/sparc64/kernel/hvapi.c b/arch/sparc64/kernel/hvapi.c
index 691760b..1d272c3 100644
--- a/arch/sparc64/kernel/hvapi.c
+++ b/arch/sparc64/kernel/hvapi.c
@@ -9,7 +9,6 @@
 
 #include <asm/hypervisor.h>
 #include <asm/oplib.h>
-#include <asm/sstate.h>
 
 /* If the hypervisor indicates that the API setting
  * calls are unsupported, by returning HV_EBADTRAP or
@@ -184,8 +183,6 @@ void __init sun4v_hvapi_init(void)
 	if (sun4v_hvapi_register(group, major, &minor))
 		goto bad;
 
-	sun4v_sstate_init();
-
 	return;
 
 bad:
diff --git a/arch/sparc64/kernel/hvcalls.S b/arch/sparc64/kernel/hvcalls.S
index a2810f3..e066269 100644
--- a/arch/sparc64/kernel/hvcalls.S
+++ b/arch/sparc64/kernel/hvcalls.S
@@ -3,89 +3,75 @@
 	 *
 	 * returns %o0: sysino
 	 */
-	.globl	sun4v_devino_to_sysino
-	.type	sun4v_devino_to_sysino,#function
-sun4v_devino_to_sysino:
+ENTRY(sun4v_devino_to_sysino)
 	mov	HV_FAST_INTR_DEVINO2SYSINO, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o1, %o0
-	.size	sun4v_devino_to_sysino, .-sun4v_devino_to_sysino
+ENDPROC(sun4v_devino_to_sysino)
 
 	/* %o0: sysino
 	 *
 	 * returns %o0: intr_enabled (HV_INTR_{DISABLED,ENABLED})
 	 */
-	.globl	sun4v_intr_getenabled
-	.type	sun4v_intr_getenabled,#function
-sun4v_intr_getenabled:
+ENTRY(sun4v_intr_getenabled)
 	mov	HV_FAST_INTR_GETENABLED, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o1, %o0
-	.size	sun4v_intr_getenabled, .-sun4v_intr_getenabled
+ENDPROC(sun4v_intr_getenabled)
 
 	/* %o0: sysino
 	 * %o1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
 	 */
-	.globl	sun4v_intr_setenabled
-	.type	sun4v_intr_setenabled,#function
-sun4v_intr_setenabled:
+ENTRY(sun4v_intr_setenabled)
 	mov	HV_FAST_INTR_SETENABLED, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_intr_setenabled, .-sun4v_intr_setenabled
+ENDPROC(sun4v_intr_setenabled)
 
 	/* %o0: sysino
 	 *
 	 * returns %o0: intr_state (HV_INTR_STATE_*)
 	 */
-	.globl	sun4v_intr_getstate
-	.type	sun4v_intr_getstate,#function
-sun4v_intr_getstate:
+ENTRY(sun4v_intr_getstate)
 	mov	HV_FAST_INTR_GETSTATE, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o1, %o0
-	.size	sun4v_intr_getstate, .-sun4v_intr_getstate
+ENDPROC(sun4v_intr_getstate)
 
 	/* %o0: sysino
 	 * %o1: intr_state (HV_INTR_STATE_*)
 	 */
-	.globl	sun4v_intr_setstate
-	.type	sun4v_intr_setstate,#function
-sun4v_intr_setstate:
+ENTRY(sun4v_intr_setstate)
 	mov	HV_FAST_INTR_SETSTATE, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_intr_setstate, .-sun4v_intr_setstate
+ENDPROC(sun4v_intr_setstate)
 
 	/* %o0: sysino
 	 *
 	 * returns %o0: cpuid
 	 */
-	.globl	sun4v_intr_gettarget
-	.type	sun4v_intr_gettarget,#function
-sun4v_intr_gettarget:
+ENTRY(sun4v_intr_gettarget)
 	mov	HV_FAST_INTR_GETTARGET, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o1, %o0
-	.size	sun4v_intr_gettarget, .-sun4v_intr_gettarget
+ENDPROC(sun4v_intr_gettarget)
 
 	/* %o0: sysino
 	 * %o1: cpuid
 	 */
-	.globl	sun4v_intr_settarget
-	.type	sun4v_intr_settarget,#function
-sun4v_intr_settarget:
+ENTRY(sun4v_intr_settarget)
 	mov	HV_FAST_INTR_SETTARGET, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_intr_settarget, .-sun4v_intr_settarget
+ENDPROC(sun4v_intr_settarget)
 
 	/* %o0:	cpuid
 	 * %o1: pc
@@ -94,37 +80,31 @@ sun4v_intr_settarget:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_cpu_start
-	.type	sun4v_cpu_start,#function
-sun4v_cpu_start:
+ENTRY(sun4v_cpu_start)
 	mov	HV_FAST_CPU_START, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_cpu_start, .-sun4v_cpu_start
+ENDPROC(sun4v_cpu_start)
 
 	/* %o0:	cpuid
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_cpu_stop
-	.type	sun4v_cpu_stop,#function
-sun4v_cpu_stop:
+ENTRY(sun4v_cpu_stop)
 	mov	HV_FAST_CPU_STOP, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_cpu_stop, .-sun4v_cpu_stop
+ENDPROC(sun4v_cpu_stop)
 
 	/* returns %o0:	status  */
-	.globl	sun4v_cpu_yield
-	.type	sun4v_cpu_yield, #function
-sun4v_cpu_yield:
+ENTRY(sun4v_cpu_yield)
 	mov	HV_FAST_CPU_YIELD, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_cpu_yield, .-sun4v_cpu_yield
+ENDPROC(sun4v_cpu_yield)
 
 	/* %o0:	type
 	 * %o1:	queue paddr
@@ -132,14 +112,12 @@ sun4v_cpu_yield:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_cpu_qconf
-	.type	sun4v_cpu_qconf,#function
-sun4v_cpu_qconf:
+ENTRY(sun4v_cpu_qconf)
 	mov	HV_FAST_CPU_QCONF, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_cpu_qconf, .-sun4v_cpu_qconf
+ENDPROC(sun4v_cpu_qconf)
 
 	/* %o0:	num cpus in cpu list
 	 * %o1:	cpu list paddr
@@ -147,23 +125,19 @@ sun4v_cpu_qconf:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_cpu_mondo_send
-	.type	sun4v_cpu_mondo_send,#function
-sun4v_cpu_mondo_send:
+ENTRY(sun4v_cpu_mondo_send)
 	mov	HV_FAST_CPU_MONDO_SEND, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_cpu_mondo_send, .-sun4v_cpu_mondo_send
+ENDPROC(sun4v_cpu_mondo_send)
 
 	/* %o0:	CPU ID
 	 *
 	 * returns %o0:	-status if status non-zero, else
 	 *         %o0:	cpu state as HV_CPU_STATE_*
 	 */
-	.globl	sun4v_cpu_state
-	.type	sun4v_cpu_state,#function
-sun4v_cpu_state:
+ENTRY(sun4v_cpu_state)
 	mov	HV_FAST_CPU_STATE, %o5
 	ta	HV_FAST_TRAP
 	brnz,pn	%o0, 1f
@@ -171,7 +145,7 @@ sun4v_cpu_state:
 	mov	%o1, %o0
 1:	retl
 	 nop
-	.size	sun4v_cpu_state, .-sun4v_cpu_state
+ENDPROC(sun4v_cpu_state)
 
 	/* %o0: virtual address
 	 * %o1: must be zero
@@ -180,28 +154,24 @@ sun4v_cpu_state:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_mmu_map_perm_addr
-	.type	sun4v_mmu_map_perm_addr,#function
-sun4v_mmu_map_perm_addr:
+ENTRY(sun4v_mmu_map_perm_addr)
 	mov	HV_FAST_MMU_MAP_PERM_ADDR, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_mmu_map_perm_addr, .-sun4v_mmu_map_perm_addr
+ENDPROC(sun4v_mmu_map_perm_addr)
 
 	/* %o0: number of TSB descriptions
 	 * %o1: TSB descriptions real address
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_mmu_tsb_ctx0
-	.type	sun4v_mmu_tsb_ctx0,#function
-sun4v_mmu_tsb_ctx0:
+ENTRY(sun4v_mmu_tsb_ctx0)
 	mov	HV_FAST_MMU_TSB_CTX0, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_mmu_tsb_ctx0, .-sun4v_mmu_tsb_ctx0
+ENDPROC(sun4v_mmu_tsb_ctx0)
 
 	/* %o0:	API group number
 	 * %o1: pointer to unsigned long major number storage
@@ -209,9 +179,7 @@ sun4v_mmu_tsb_ctx0:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_get_version
-	.type	sun4v_get_version,#function
-sun4v_get_version:
+ENTRY(sun4v_get_version)
 	mov	HV_CORE_GET_VER, %o5
 	mov	%o1, %o3
 	mov	%o2, %o4
@@ -219,7 +187,7 @@ sun4v_get_version:
 	stx	%o1, [%o3]
 	retl
 	 stx	%o2, [%o4]
-	.size	sun4v_get_version, .-sun4v_get_version
+ENDPROC(sun4v_get_version)
 
 	/* %o0: API group number
 	 * %o1: desired major number
@@ -228,51 +196,43 @@ sun4v_get_version:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_set_version
-	.type	sun4v_set_version,#function
-sun4v_set_version:
+ENTRY(sun4v_set_version)
 	mov	HV_CORE_SET_VER, %o5
 	mov	%o3, %o4
 	ta	HV_CORE_TRAP
 	retl
 	 stx	%o1, [%o4]
-	.size	sun4v_set_version, .-sun4v_set_version
+ENDPROC(sun4v_set_version)
 
 	/* %o0: pointer to unsigned long time
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_tod_get
-	.type	sun4v_tod_get,#function
-sun4v_tod_get:
+ENTRY(sun4v_tod_get)
 	mov	%o0, %o4
 	mov	HV_FAST_TOD_GET, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o4]
 	retl
 	 nop
-	.size	sun4v_tod_get, .-sun4v_tod_get
+ENDPROC(sun4v_tod_get)
 
 	/* %o0: time
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_tod_set
-	.type	sun4v_tod_set,#function
-sun4v_tod_set:
+ENTRY(sun4v_tod_set)
 	mov	HV_FAST_TOD_SET, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_tod_set, .-sun4v_tod_set
+ENDPROC(sun4v_tod_set)
 
 	/* %o0: pointer to unsigned long status
 	 *
 	 * returns %o0: signed character
 	 */
-	.globl	sun4v_con_getchar
-	.type	sun4v_con_getchar,#function
-sun4v_con_getchar:
+ENTRY(sun4v_con_getchar)
 	mov	%o0, %o4
 	mov	HV_FAST_CONS_GETCHAR, %o5
 	clr	%o0
@@ -281,20 +241,18 @@ sun4v_con_getchar:
 	stx	%o0, [%o4]
 	retl
 	 sra	%o1, 0, %o0
-	.size	sun4v_con_getchar, .-sun4v_con_getchar
+ENDPROC(sun4v_con_getchar)
 
 	/* %o0: signed long character
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_con_putchar
-	.type	sun4v_con_putchar,#function
-sun4v_con_putchar:
+ENTRY(sun4v_con_putchar)
 	mov	HV_FAST_CONS_PUTCHAR, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 sra	%o0, 0, %o0
-	.size	sun4v_con_putchar, .-sun4v_con_putchar
+ENDPROC(sun4v_con_putchar)
 
 	/* %o0: buffer real address
 	 * %o1: buffer size
@@ -302,9 +260,7 @@ sun4v_con_putchar:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_con_read
-	.type	sun4v_con_read,#function
-sun4v_con_read:
+ENTRY(sun4v_con_read)
 	mov	%o2, %o4
 	mov	HV_FAST_CONS_READ, %o5
 	ta	HV_FAST_TRAP
@@ -318,7 +274,7 @@ sun4v_con_read:
 	stx	%o1, [%o4]
 1:	retl
 	 nop
-	.size	sun4v_con_read, .-sun4v_con_read
+ENDPROC(sun4v_con_read)
 
 	/* %o0: buffer real address
 	 * %o1: buffer size
@@ -326,43 +282,37 @@ sun4v_con_read:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_con_write
-	.type	sun4v_con_write,#function
-sun4v_con_write:
+ENTRY(sun4v_con_write)
 	mov	%o2, %o4
 	mov	HV_FAST_CONS_WRITE, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o4]
 	retl
 	 nop
-	.size	sun4v_con_write, .-sun4v_con_write
+ENDPROC(sun4v_con_write)
 
 	/* %o0:	soft state
 	 * %o1:	address of description string
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_mach_set_soft_state
-	.type	sun4v_mach_set_soft_state,#function
-sun4v_mach_set_soft_state:
+ENTRY(sun4v_mach_set_soft_state)
 	mov	HV_FAST_MACH_SET_SOFT_STATE, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_mach_set_soft_state, .-sun4v_mach_set_soft_state
+ENDPROC(sun4v_mach_set_soft_state)
 
 	/* %o0: exit code
 	 *
 	 * Does not return.
 	 */
-	.globl	sun4v_mach_exit
-	.type	sun4v_mach_exit,#function
-sun4v_mach_exit:
+ENTRY(sun4v_mach_exit)
 	mov	HV_FAST_MACH_EXIT, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_mach_exit, .-sun4v_mach_exit
+ENDPROC(sun4v_mach_exit)
 
 	/* %o0: buffer real address
 	 * %o1: buffer length
@@ -370,44 +320,38 @@ sun4v_mach_exit:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_mach_desc
-	.type	sun4v_mach_desc,#function
-sun4v_mach_desc:
+ENTRY(sun4v_mach_desc)
 	mov	%o2, %o4
 	mov	HV_FAST_MACH_DESC, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o4]
 	retl
 	 nop
-	.size	sun4v_mach_desc, .-sun4v_mach_desc
+ENDPROC(sun4v_mach_desc)
 
 	/* %o0: new timeout in milliseconds
 	 * %o1: pointer to unsigned long orig_timeout
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_mach_set_watchdog
-	.type	sun4v_mach_set_watchdog,#function
-sun4v_mach_set_watchdog:
+ENTRY(sun4v_mach_set_watchdog)
 	mov	%o1, %o4
 	mov	HV_FAST_MACH_SET_WATCHDOG, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o4]
 	retl
 	 nop
-	.size	sun4v_mach_set_watchdog, .-sun4v_mach_set_watchdog
+ENDPROC(sun4v_mach_set_watchdog)
 
 	/* No inputs and does not return.  */
-	.globl	sun4v_mach_sir
-	.type	sun4v_mach_sir,#function
-sun4v_mach_sir:
+ENTRY(sun4v_mach_sir)
 	mov	%o1, %o4
 	mov	HV_FAST_MACH_SIR, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o4]
 	retl
 	 nop
-	.size	sun4v_mach_sir, .-sun4v_mach_sir
+ENDPROC(sun4v_mach_sir)
 
 	/* %o0: channel
 	 * %o1:	ra
@@ -415,14 +359,12 @@ sun4v_mach_sir:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_tx_qconf
-	.type	sun4v_ldc_tx_qconf,#function
-sun4v_ldc_tx_qconf:
+ENTRY(sun4v_ldc_tx_qconf)
 	mov	HV_FAST_LDC_TX_QCONF, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_ldc_tx_qconf, .-sun4v_ldc_tx_qconf
+ENDPROC(sun4v_ldc_tx_qconf)
 
 	/* %o0: channel
 	 * %o1:	pointer to unsigned long ra
@@ -430,9 +372,7 @@ sun4v_ldc_tx_qconf:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_tx_qinfo
-	.type	sun4v_ldc_tx_qinfo,#function
-sun4v_ldc_tx_qinfo:
+ENTRY(sun4v_ldc_tx_qinfo)
 	mov	%o1, %g1
 	mov	%o2, %g2
 	mov	HV_FAST_LDC_TX_QINFO, %o5
@@ -441,7 +381,7 @@ sun4v_ldc_tx_qinfo:
 	stx	%o2, [%g2]
 	retl
 	 nop
-	.size	sun4v_ldc_tx_qinfo, .-sun4v_ldc_tx_qinfo
+ENDPROC(sun4v_ldc_tx_qinfo)
 
 	/* %o0: channel
 	 * %o1:	pointer to unsigned long head_off
@@ -450,9 +390,7 @@ sun4v_ldc_tx_qinfo:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_tx_get_state
-	.type	sun4v_ldc_tx_get_state,#function
-sun4v_ldc_tx_get_state:
+ENTRY(sun4v_ldc_tx_get_state)
 	mov	%o1, %g1
 	mov	%o2, %g2
 	mov	%o3, %g3
@@ -463,21 +401,19 @@ sun4v_ldc_tx_get_state:
 	stx	%o3, [%g3]
 	retl
 	 nop
-	.size	sun4v_ldc_tx_get_state, .-sun4v_ldc_tx_get_state
+ENDPROC(sun4v_ldc_tx_get_state)
 
 	/* %o0: channel
 	 * %o1:	tail_off
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_tx_set_qtail
-	.type	sun4v_ldc_tx_set_qtail,#function
-sun4v_ldc_tx_set_qtail:
+ENTRY(sun4v_ldc_tx_set_qtail)
 	mov	HV_FAST_LDC_TX_SET_QTAIL, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_ldc_tx_set_qtail, .-sun4v_ldc_tx_set_qtail
+ENDPROC(sun4v_ldc_tx_set_qtail)
 
 	/* %o0: channel
 	 * %o1:	ra
@@ -485,14 +421,12 @@ sun4v_ldc_tx_set_qtail:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_rx_qconf
-	.type	sun4v_ldc_rx_qconf,#function
-sun4v_ldc_rx_qconf:
+ENTRY(sun4v_ldc_rx_qconf)
 	mov	HV_FAST_LDC_RX_QCONF, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_ldc_rx_qconf, .-sun4v_ldc_rx_qconf
+ENDPROC(sun4v_ldc_rx_qconf)
 
 	/* %o0: channel
 	 * %o1:	pointer to unsigned long ra
@@ -500,9 +434,7 @@ sun4v_ldc_rx_qconf:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_rx_qinfo
-	.type	sun4v_ldc_rx_qinfo,#function
-sun4v_ldc_rx_qinfo:
+ENTRY(sun4v_ldc_rx_qinfo)
 	mov	%o1, %g1
 	mov	%o2, %g2
 	mov	HV_FAST_LDC_RX_QINFO, %o5
@@ -511,7 +443,7 @@ sun4v_ldc_rx_qinfo:
 	stx	%o2, [%g2]
 	retl
 	 nop
-	.size	sun4v_ldc_rx_qinfo, .-sun4v_ldc_rx_qinfo
+ENDPROC(sun4v_ldc_rx_qinfo)
 
 	/* %o0: channel
 	 * %o1:	pointer to unsigned long head_off
@@ -520,9 +452,7 @@ sun4v_ldc_rx_qinfo:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_rx_get_state
-	.type	sun4v_ldc_rx_get_state,#function
-sun4v_ldc_rx_get_state:
+ENTRY(sun4v_ldc_rx_get_state)
 	mov	%o1, %g1
 	mov	%o2, %g2
 	mov	%o3, %g3
@@ -533,21 +463,19 @@ sun4v_ldc_rx_get_state:
 	stx	%o3, [%g3]
 	retl
 	 nop
-	.size	sun4v_ldc_rx_get_state, .-sun4v_ldc_rx_get_state
+ENDPROC(sun4v_ldc_rx_get_state)
 
 	/* %o0: channel
 	 * %o1:	head_off
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_rx_set_qhead
-	.type	sun4v_ldc_rx_set_qhead,#function
-sun4v_ldc_rx_set_qhead:
+ENTRY(sun4v_ldc_rx_set_qhead)
 	mov	HV_FAST_LDC_RX_SET_QHEAD, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_ldc_rx_set_qhead, .-sun4v_ldc_rx_set_qhead
+ENDPROC(sun4v_ldc_rx_set_qhead)
 
 	/* %o0: channel
 	 * %o1:	ra
@@ -555,14 +483,12 @@ sun4v_ldc_rx_set_qhead:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_ldc_set_map_table
-	.type	sun4v_ldc_set_map_table,#function
-sun4v_ldc_set_map_table:
+ENTRY(sun4v_ldc_set_map_table)
 	mov	HV_FAST_LDC_SET_MAP_TABLE, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_ldc_set_map_table, .-sun4v_ldc_set_map_table
+ENDPROC(sun4v_ldc_set_map_table)
 
 	/* %o0: channel
 	 * %o1:	pointer to unsigned long ra
@@ -570,9 +496,7 @@ sun4v_ldc_set_map_table:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_ldc_get_map_table
-	.type	sun4v_ldc_get_map_table,#function
-sun4v_ldc_get_map_table:
+ENTRY(sun4v_ldc_get_map_table)
 	mov	%o1, %g1
 	mov	%o2, %g2
 	mov	HV_FAST_LDC_GET_MAP_TABLE, %o5
@@ -581,7 +505,7 @@ sun4v_ldc_get_map_table:
 	stx	%o2, [%g2]
 	retl
 	 nop
-	.size	sun4v_ldc_get_map_table, .-sun4v_ldc_get_map_table
+ENDPROC(sun4v_ldc_get_map_table)
 
 	/* %o0:	channel
 	 * %o1:	dir_code
@@ -592,16 +516,14 @@ sun4v_ldc_get_map_table:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_copy
-	.type	sun4v_ldc_copy,#function
-sun4v_ldc_copy:
+ENTRY(sun4v_ldc_copy)
 	mov	%o5, %g1
 	mov	HV_FAST_LDC_COPY, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%g1]
 	retl
 	 nop
-	.size	sun4v_ldc_copy, .-sun4v_ldc_copy
+ENDPROC(sun4v_ldc_copy)
 
 	/* %o0:	channel
 	 * %o1:	cookie
@@ -610,9 +532,7 @@ sun4v_ldc_copy:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_mapin
-	.type	sun4v_ldc_mapin,#function
-sun4v_ldc_mapin:
+ENTRY(sun4v_ldc_mapin)
 	mov	%o2, %g1
 	mov	%o3, %g2
 	mov	HV_FAST_LDC_MAPIN, %o5
@@ -621,20 +541,18 @@ sun4v_ldc_mapin:
 	stx	%o2, [%g2]
 	retl
 	 nop
-	.size	sun4v_ldc_mapin, .-sun4v_ldc_mapin
+ENDPROC(sun4v_ldc_mapin)
 
 	/* %o0:	ra
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_unmap
-	.type	sun4v_ldc_unmap,#function
-sun4v_ldc_unmap:
+ENTRY(sun4v_ldc_unmap)
 	mov	HV_FAST_LDC_UNMAP, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_ldc_unmap, .-sun4v_ldc_unmap
+ENDPROC(sun4v_ldc_unmap)
 
 	/* %o0: channel
 	 * %o1:	cookie
@@ -642,14 +560,12 @@ sun4v_ldc_unmap:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ldc_revoke
-	.type	sun4v_ldc_revoke,#function
-sun4v_ldc_revoke:
+ENTRY(sun4v_ldc_revoke)
 	mov	HV_FAST_LDC_REVOKE, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_ldc_revoke, .-sun4v_ldc_revoke
+ENDPROC(sun4v_ldc_revoke)
 
 	/* %o0: device handle
 	 * %o1:	device INO
@@ -657,16 +573,14 @@ sun4v_ldc_revoke:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_vintr_get_cookie
-	.type	sun4v_vintr_get_cookie,#function
-sun4v_vintr_get_cookie:
+ENTRY(sun4v_vintr_get_cookie)
 	mov	%o2, %g1
 	mov	HV_FAST_VINTR_GET_COOKIE, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%g1]
 	retl
 	 nop
-	.size	sun4v_vintr_get_cookie, .-sun4v_vintr_get_cookie
+ENDPROC(sun4v_vintr_get_cookie)
 
 	/* %o0: device handle
 	 * %o1:	device INO
@@ -674,14 +588,12 @@ sun4v_vintr_get_cookie:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_vintr_set_cookie
-	.type	sun4v_vintr_set_cookie,#function
-sun4v_vintr_set_cookie:
+ENTRY(sun4v_vintr_set_cookie)
 	mov	HV_FAST_VINTR_SET_COOKIE, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_vintr_set_cookie, .-sun4v_vintr_set_cookie
+ENDPROC(sun4v_vintr_set_cookie)
 
 	/* %o0: device handle
 	 * %o1:	device INO
@@ -689,16 +601,14 @@ sun4v_vintr_set_cookie:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_vintr_get_valid
-	.type	sun4v_vintr_get_valid,#function
-sun4v_vintr_get_valid:
+ENTRY(sun4v_vintr_get_valid)
 	mov	%o2, %g1
 	mov	HV_FAST_VINTR_GET_VALID, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%g1]
 	retl
 	 nop
-	.size	sun4v_vintr_get_valid, .-sun4v_vintr_get_valid
+ENDPROC(sun4v_vintr_get_valid)
 
 	/* %o0: device handle
 	 * %o1:	device INO
@@ -706,14 +616,12 @@ sun4v_vintr_get_valid:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_vintr_set_valid
-	.type	sun4v_vintr_set_valid,#function
-sun4v_vintr_set_valid:
+ENTRY(sun4v_vintr_set_valid)
 	mov	HV_FAST_VINTR_SET_VALID, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_vintr_set_valid, .-sun4v_vintr_set_valid
+ENDPROC(sun4v_vintr_set_valid)
 
 	/* %o0: device handle
 	 * %o1:	device INO
@@ -721,16 +629,14 @@ sun4v_vintr_set_valid:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_vintr_get_state
-	.type	sun4v_vintr_get_state,#function
-sun4v_vintr_get_state:
+ENTRY(sun4v_vintr_get_state)
 	mov	%o2, %g1
 	mov	HV_FAST_VINTR_GET_STATE, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%g1]
 	retl
 	 nop
-	.size	sun4v_vintr_get_state, .-sun4v_vintr_get_state
+ENDPROC(sun4v_vintr_get_state)
 
 	/* %o0: device handle
 	 * %o1:	device INO
@@ -738,14 +644,12 @@ sun4v_vintr_get_state:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_vintr_set_state
-	.type	sun4v_vintr_set_state,#function
-sun4v_vintr_set_state:
+ENTRY(sun4v_vintr_set_state)
 	mov	HV_FAST_VINTR_SET_STATE, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_vintr_set_state, .-sun4v_vintr_set_state
+ENDPROC(sun4v_vintr_set_state)
 
 	/* %o0: device handle
 	 * %o1:	device INO
@@ -753,16 +657,14 @@ sun4v_vintr_set_state:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_vintr_get_target
-	.type	sun4v_vintr_get_target,#function
-sun4v_vintr_get_target:
+ENTRY(sun4v_vintr_get_target)
 	mov	%o2, %g1
 	mov	HV_FAST_VINTR_GET_TARGET, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%g1]
 	retl
 	 nop
-	.size	sun4v_vintr_get_target, .-sun4v_vintr_get_target
+ENDPROC(sun4v_vintr_get_target)
 
 	/* %o0: device handle
 	 * %o1:	device INO
@@ -770,14 +672,12 @@ sun4v_vintr_get_target:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	sun4v_vintr_set_target
-	.type	sun4v_vintr_set_target,#function
-sun4v_vintr_set_target:
+ENTRY(sun4v_vintr_set_target)
 	mov	HV_FAST_VINTR_SET_TARGET, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_vintr_set_target, .-sun4v_vintr_set_target
+ENDPROC(sun4v_vintr_set_target)
 
 	/* %o0: NCS sub-function
 	 * %o1:	sub-function arg real-address
@@ -785,18 +685,14 @@ sun4v_vintr_set_target:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	sun4v_ncs_request
-	.type	sun4v_ncs_request,#function
-sun4v_ncs_request:
+ENTRY(sun4v_ncs_request)
 	mov	HV_FAST_NCS_REQUEST, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_ncs_request, .-sun4v_ncs_request
+ENDPROC(sun4v_ncs_request)
 
-	.globl	sun4v_svc_send
-	.type	sun4v_svc_send,#function
-sun4v_svc_send:
+ENTRY(sun4v_svc_send)
 	save	%sp, -192, %sp
 	mov	%i0, %o0
 	mov	%i1, %o1
@@ -806,11 +702,9 @@ sun4v_svc_send:
 	stx	%o1, [%i3]
 	ret
 	restore
-	.size	sun4v_svc_send, .-sun4v_svc_send
+ENDPROC(sun4v_svc_send)
 
-	.globl	sun4v_svc_recv
-	.type	sun4v_svc_recv,#function
-sun4v_svc_recv:
+ENTRY(sun4v_svc_recv)
 	save	%sp, -192, %sp
 	mov	%i0, %o0
 	mov	%i1, %o1
@@ -820,62 +714,50 @@ sun4v_svc_recv:
 	stx	%o1, [%i3]
 	ret
 	restore
-	.size	sun4v_svc_recv, .-sun4v_svc_recv
+ENDPROC(sun4v_svc_recv)
 
-	.globl	sun4v_svc_getstatus
-	.type	sun4v_svc_getstatus,#function
-sun4v_svc_getstatus:
+ENTRY(sun4v_svc_getstatus)
 	mov	HV_FAST_SVC_GETSTATUS, %o5
 	mov	%o1, %o4
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o4]
 	retl
 	 nop
-	.size	sun4v_svc_getstatus, .-sun4v_svc_getstatus
+ENDPROC(sun4v_svc_getstatus)
 
-	.globl	sun4v_svc_setstatus
-	.type	sun4v_svc_setstatus,#function
-sun4v_svc_setstatus:
+ENTRY(sun4v_svc_setstatus)
 	mov	HV_FAST_SVC_SETSTATUS, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_svc_setstatus, .-sun4v_svc_setstatus
+ENDPROC(sun4v_svc_setstatus)
 
-	.globl	sun4v_svc_clrstatus
-	.type	sun4v_svc_clrstatus,#function
-sun4v_svc_clrstatus:
+ENTRY(sun4v_svc_clrstatus)
 	mov	HV_FAST_SVC_CLRSTATUS, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_svc_clrstatus, .-sun4v_svc_clrstatus
+ENDPROC(sun4v_svc_clrstatus)
 
-	.globl	sun4v_mmustat_conf
-	.type	sun4v_mmustat_conf,#function
-sun4v_mmustat_conf:
+ENTRY(sun4v_mmustat_conf)
 	mov	%o1, %o4
 	mov	HV_FAST_MMUSTAT_CONF, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o4]
 	retl
 	 nop
-	.size	sun4v_mmustat_conf, .-sun4v_mmustat_conf
+ENDPROC(sun4v_mmustat_conf)
 
-	.globl	sun4v_mmustat_info
-	.type	sun4v_mmustat_info,#function
-sun4v_mmustat_info:
+ENTRY(sun4v_mmustat_info)
 	mov	%o0, %o4
 	mov	HV_FAST_MMUSTAT_INFO, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o4]
 	retl
 	 nop
-	.size	sun4v_mmustat_info, .-sun4v_mmustat_info
+ENDPROC(sun4v_mmustat_info)
 
-	.globl	sun4v_mmu_demap_all
-	.type	sun4v_mmu_demap_all,#function
-sun4v_mmu_demap_all:
+ENTRY(sun4v_mmu_demap_all)
 	clr	%o0
 	clr	%o1
 	mov	HV_MMU_ALL, %o2
@@ -883,4 +765,4 @@ sun4v_mmu_demap_all:
 	ta	HV_FAST_TRAP
 	retl
 	 nop
-	.size	sun4v_mmu_demap_all, .-sun4v_mmu_demap_all
+ENDPROC(sun4v_mmu_demap_all)
diff --git a/arch/sparc64/kernel/iommu.c b/arch/sparc64/kernel/iommu.c
index 2a37a6c..1cc1995 100644
--- a/arch/sparc64/kernel/iommu.c
+++ b/arch/sparc64/kernel/iommu.c
@@ -575,7 +575,7 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 		}
 		/* Allocate iommu entries for that segment */
 		paddr = (unsigned long) SG_ENT_PHYS_ADDRESS(s);
-		npages = iommu_num_pages(paddr, slen);
+		npages = iommu_num_pages(paddr, slen, IO_PAGE_SIZE);
 		entry = iommu_range_alloc(dev, iommu, npages, &handle);
 
 		/* Handle failure */
@@ -647,7 +647,8 @@ iommu_map_failed:
 			iopte_t *base;
 
 			vaddr = s->dma_address & IO_PAGE_MASK;
-			npages = iommu_num_pages(s->dma_address, s->dma_length);
+			npages = iommu_num_pages(s->dma_address, s->dma_length,
+						 IO_PAGE_SIZE);
 			iommu_range_free(iommu, vaddr, npages);
 
 			entry = (vaddr - iommu->page_table_map_base)
@@ -715,7 +716,7 @@ static void dma_4u_unmap_sg(struct device *dev, struct scatterlist *sglist,
 
 		if (!len)
 			break;
-		npages = iommu_num_pages(dma_handle, len);
+		npages = iommu_num_pages(dma_handle, len, IO_PAGE_SIZE);
 		iommu_range_free(iommu, dma_handle, npages);
 
 		entry = ((dma_handle - iommu->page_table_map_base)
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index 53b19c8..591f587 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -35,17 +35,6 @@
 
 #define SG_ENT_PHYS_ADDRESS(SG)	(__pa(sg_virt((SG))))
 
-static inline unsigned long iommu_num_pages(unsigned long vaddr,
-					    unsigned long slen)
-{
-	unsigned long npages;
-
-	npages = IO_PAGE_ALIGN(vaddr + slen) - (vaddr & IO_PAGE_MASK);
-	npages >>= IO_PAGE_SHIFT;
-
-	return npages;
-}
-
 static inline int is_span_boundary(unsigned long entry,
 				   unsigned long shift,
 				   unsigned long boundary_size,
@@ -53,7 +42,8 @@ static inline int is_span_boundary(unsigned long entry,
 				   struct scatterlist *sg)
 {
 	unsigned long paddr = SG_ENT_PHYS_ADDRESS(outs);
-	int nr = iommu_num_pages(paddr, outs->dma_length + sg->length);
+	int nr = iommu_num_pages(paddr, outs->dma_length + sg->length,
+				 IO_PAGE_SIZE);
 
 	return iommu_is_span_boundary(entry, nr, shift, boundary_size);
 }
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index 7495bc7..52fc836 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -29,7 +29,6 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/sbus.h>
 #include <asm/iommu.h>
 #include <asm/upa.h>
 #include <asm/oplib.h>
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index f845f15..0f616ae 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -55,15 +55,38 @@ struct of_device *of_find_device_by_node(struct device_node *dp)
 }
 EXPORT_SYMBOL(of_find_device_by_node);
 
-#ifdef CONFIG_PCI
-struct bus_type ebus_bus_type;
-EXPORT_SYMBOL(ebus_bus_type);
-#endif
+unsigned int irq_of_parse_and_map(struct device_node *node, int index)
+{
+	struct of_device *op = of_find_device_by_node(node);
+
+	if (!op || index >= op->num_irqs)
+		return 0;
+
+	return op->irqs[index];
+}
+EXPORT_SYMBOL(irq_of_parse_and_map);
+
+/* Take the archdata values for IOMMU, STC, and HOSTDATA found in
+ * BUS and propagate to all child of_device objects.
+ */
+void of_propagate_archdata(struct of_device *bus)
+{
+	struct dev_archdata *bus_sd = &bus->dev.archdata;
+	struct device_node *bus_dp = bus->node;
+	struct device_node *dp;
 
-#ifdef CONFIG_SBUS
-struct bus_type sbus_bus_type;
-EXPORT_SYMBOL(sbus_bus_type);
-#endif
+	for (dp = bus_dp->child; dp; dp = dp->sibling) {
+		struct of_device *op = of_find_device_by_node(dp);
+
+		op->dev.archdata.iommu = bus_sd->iommu;
+		op->dev.archdata.stc = bus_sd->stc;
+		op->dev.archdata.host_controller = bus_sd->host_controller;
+		op->dev.archdata.numa_node = bus_sd->numa_node;
+
+		if (dp->child)
+			of_propagate_archdata(op);
+	}
+}
 
 struct bus_type of_platform_bus_type;
 EXPORT_SYMBOL(of_platform_bus_type);
@@ -169,7 +192,7 @@ static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long fla
 
 static int of_bus_pci_match(struct device_node *np)
 {
-	if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+	if (!strcmp(np->name, "pci")) {
 		const char *model = of_get_property(np, "model", NULL);
 
 		if (model && !strcmp(model, "SUNW,simba"))
@@ -200,7 +223,7 @@ static int of_bus_simba_match(struct device_node *np)
 	/* Treat PCI busses lacking ranges property just like
 	 * simba.
 	 */
-	if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+	if (!strcmp(np->name, "pci")) {
 		if (!of_find_property(np, "ranges", NULL))
 			return 1;
 	}
@@ -378,8 +401,7 @@ static int __init build_one_resource(struct device_node *parent,
 				     int na, int ns, int pna)
 {
 	const u32 *ranges;
-	unsigned int rlen;
-	int rone;
+	int rone, rlen;
 
 	ranges = of_get_property(parent, "ranges", &rlen);
 	if (ranges == NULL || rlen == 0) {
@@ -421,15 +443,24 @@ static int __init use_1to1_mapping(struct device_node *pp)
 
 	/* If the parent is the dma node of an ISA bus, pass
 	 * the translation up to the root.
+	 *
+	 * Some SBUS devices use intermediate nodes to express
+	 * hierarchy within the device itself.  These aren't
+	 * real bus nodes, and don't have a 'ranges' property.
+	 * But, we should still pass the translation work up
+	 * to the SBUS itself.
 	 */
-	if (!strcmp(pp->name, "dma"))
+	if (!strcmp(pp->name, "dma") ||
+	    !strcmp(pp->name, "espdma") ||
+	    !strcmp(pp->name, "ledma") ||
+	    !strcmp(pp->name, "lebuffer"))
 		return 0;
 
 	/* Similarly for all PCI bridges, if we get this far
 	 * it lacks a ranges property, and this will include
 	 * cases like Simba.
 	 */
-	if (!strcmp(pp->type, "pci") || !strcmp(pp->type, "pciex"))
+	if (!strcmp(pp->name, "pci"))
 		return 0;
 
 	return 1;
@@ -714,8 +745,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op,
 				break;
 			}
 		} else {
-			if (!strcmp(pp->type, "pci") ||
-			    !strcmp(pp->type, "pciex")) {
+			if (!strcmp(pp->name, "pci")) {
 				unsigned int this_orig_irq = irq;
 
 				irq = pci_irq_swizzle(dp, pp, irq);
@@ -845,15 +875,6 @@ static int __init of_bus_driver_init(void)
 	int err;
 
 	err = of_bus_type_init(&of_platform_bus_type, "of");
-#ifdef CONFIG_PCI
-	if (!err)
-		err = of_bus_type_init(&ebus_bus_type, "ebus");
-#endif
-#ifdef CONFIG_SBUS
-	if (!err)
-		err = of_bus_type_init(&sbus_bus_type, "sbus");
-#endif
-
 	if (!err)
 		scan_of_devices();
 
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index 5509619..242ac1c 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -18,32 +18,17 @@
 #include <linux/msi.h>
 #include <linux/irq.h>
 #include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/irq.h>
-#include <asm/ebus.h>
 #include <asm/prom.h>
 #include <asm/apb.h>
 
 #include "pci_impl.h"
 
-#ifndef CONFIG_PCI
-/* A "nop" PCI implementation. */
-asmlinkage int sys_pciconfig_read(unsigned long bus, unsigned long dfn,
-				  unsigned long off, unsigned long len,
-				  unsigned char *buf)
-{
-	return 0;
-}
-asmlinkage int sys_pciconfig_write(unsigned long bus, unsigned long dfn,
-				   unsigned long off, unsigned long len,
-				   unsigned char *buf)
-{
-	return 0;
-}
-#else
-
 /* List of all PCI controllers found in the system. */
 struct pci_pbm_info *pci_pbm_root = NULL;
 
@@ -179,97 +164,6 @@ void pci_config_write32(u32 *addr, u32 val)
 	spin_unlock_irqrestore(&pci_poke_lock, flags);
 }
 
-/* Probe for all PCI controllers in the system. */
-extern void sabre_init(struct device_node *, const char *);
-extern void psycho_init(struct device_node *, const char *);
-extern void schizo_init(struct device_node *, const char *);
-extern void schizo_plus_init(struct device_node *, const char *);
-extern void tomatillo_init(struct device_node *, const char *);
-extern void sun4v_pci_init(struct device_node *, const char *);
-extern void fire_pci_init(struct device_node *, const char *);
-
-static struct {
-	char *model_name;
-	void (*init)(struct device_node *, const char *);
-} pci_controller_table[] __initdata = {
-	{ "SUNW,sabre", sabre_init },
-	{ "pci108e,a000", sabre_init },
-	{ "pci108e,a001", sabre_init },
-	{ "SUNW,psycho", psycho_init },
-	{ "pci108e,8000", psycho_init },
-	{ "SUNW,schizo", schizo_init },
-	{ "pci108e,8001", schizo_init },
-	{ "SUNW,schizo+", schizo_plus_init },
-	{ "pci108e,8002", schizo_plus_init },
-	{ "SUNW,tomatillo", tomatillo_init },
-	{ "pci108e,a801", tomatillo_init },
-	{ "SUNW,sun4v-pci", sun4v_pci_init },
-	{ "pciex108e,80f0", fire_pci_init },
-};
-#define PCI_NUM_CONTROLLER_TYPES	ARRAY_SIZE(pci_controller_table)
-
-static int __init pci_controller_init(const char *model_name, int namelen, struct device_node *dp)
-{
-	int i;
-
-	for (i = 0; i < PCI_NUM_CONTROLLER_TYPES; i++) {
-		if (!strncmp(model_name,
-			     pci_controller_table[i].model_name,
-			     namelen)) {
-			pci_controller_table[i].init(dp, model_name);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static int __init pci_controller_scan(int (*handler)(const char *, int, struct device_node *))
-{
-	struct device_node *dp;
-	int count = 0;
-
-	for_each_node_by_name(dp, "pci") {
-		struct property *prop;
-		int len;
-
-		prop = of_find_property(dp, "model", &len);
-		if (!prop)
-			prop = of_find_property(dp, "compatible", &len);
-
-		if (prop) {
-			const char *model = prop->value;
-			int item_len = 0;
-
-			/* Our value may be a multi-valued string in the
-			 * case of some compatible properties. For sanity,
-			 * only try the first one.
-			 */
-			while (model[item_len] && len) {
-				len--;
-				item_len++;
-			}
-
-			if (handler(model, item_len, dp))
-				count++;
-		}
-	}
-
-	return count;
-}
-
-/* Find each controller in the system, attach and initialize
- * software state structure for each and link into the
- * pci_pbm_root.  Setup the controller enough such
- * that bus scanning can be done.
- */
-static void __init pci_controller_probe(void)
-{
-	printk("PCI: Probing for controllers.\n");
-
-	pci_controller_scan(pci_controller_init);
-}
-
 static int ofpci_verbose;
 
 static int __init ofpci_debug(char *str)
@@ -348,11 +242,12 @@ static void pci_parse_of_addrs(struct of_device *op,
 	}
 }
 
-struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
-				  struct device_node *node,
-				  struct pci_bus *bus, int devfn)
+static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
+					 struct device_node *node,
+					 struct pci_bus *bus, int devfn)
 {
 	struct dev_archdata *sd;
+	struct of_device *op;
 	struct pci_dev *dev;
 	const char *type;
 	u32 class;
@@ -366,14 +261,17 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	sd->stc = &pbm->stc;
 	sd->host_controller = pbm;
 	sd->prom_node = node;
-	sd->op = of_find_device_by_node(node);
+	sd->op = op = of_find_device_by_node(node);
 	sd->numa_node = pbm->numa_node;
 
-	sd = &sd->op->dev.archdata;
+	sd = &op->dev.archdata;
 	sd->iommu = pbm->iommu;
 	sd->stc = &pbm->stc;
 	sd->numa_node = pbm->numa_node;
 
+	if (!strcmp(node->name, "ebus"))
+		of_propagate_archdata(op);
+
 	type = of_get_property(node, "device_type", NULL);
 	if (type == NULL)
 		type = "";
@@ -425,7 +323,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev->current_state = 4;		/* unknown power state */
 	dev->error_state = pci_channel_io_normal;
 
-	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+	if (!strcmp(node->name, "pci")) {
 		/* a PCI-PCI bridge */
 		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
 		dev->rom_base_reg = PCI_ROM_ADDRESS1;
@@ -775,15 +673,15 @@ static void __devinit pci_bus_register_of_sysfs(struct pci_bus *bus)
 		pci_bus_register_of_sysfs(child_bus);
 }
 
-struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm)
+struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm,
+					    struct device *parent)
 {
-	struct device_node *node = pbm->prom_node;
+	struct device_node *node = pbm->op->node;
 	struct pci_bus *bus;
 
 	printk("PCI: Scanning PBM %s\n", node->full_name);
 
-	/* XXX parent device? XXX */
-	bus = pci_create_bus(NULL, pbm->pci_first_busno, pbm->pci_ops, pbm);
+	bus = pci_create_bus(parent, pbm->pci_first_busno, pbm->pci_ops, pbm);
 	if (!bus) {
 		printk(KERN_ERR "Failed to create bus for %s\n",
 		       node->full_name);
@@ -802,32 +700,6 @@ struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm)
 	return bus;
 }
 
-static void __init pci_scan_each_controller_bus(void)
-{
-	struct pci_pbm_info *pbm;
-
-	for (pbm = pci_pbm_root; pbm; pbm = pbm->next)
-		pbm->scan_bus(pbm);
-}
-
-extern void power_init(void);
-
-static int __init pcibios_init(void)
-{
-	pci_controller_probe();
-	if (pci_pbm_root == NULL)
-		return 0;
-
-	pci_scan_each_controller_bus();
-
-	ebus_init();
-	power_init();
-
-	return 0;
-}
-
-subsys_initcall(pcibios_init);
-
 void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
 {
 	struct pci_pbm_info *pbm = pbus->sysdata;
@@ -1105,14 +977,14 @@ int pcibus_to_node(struct pci_bus *pbus)
 EXPORT_SYMBOL(pcibus_to_node);
 #endif
 
-/* Return the domain nuber for this pci bus */
+/* Return the domain number for this pci bus */
 
 int pci_domain_nr(struct pci_bus *pbus)
 {
 	struct pci_pbm_info *pbm = pbus->sysdata;
 	int ret;
 
-	if (pbm == NULL || pbm->parent == NULL) {
+	if (!pbm) {
 		ret = -ENXIO;
 	} else {
 		ret = pbm->index;
@@ -1126,7 +998,7 @@ EXPORT_SYMBOL(pci_domain_nr);
 int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
-	int virt_irq;
+	unsigned int virt_irq;
 
 	if (!pbm->setup_msi_irq)
 		return -EINVAL;
@@ -1140,10 +1012,8 @@ void arch_teardown_msi_irq(unsigned int virt_irq)
 	struct pci_dev *pdev = entry->dev;
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 
-	if (!pbm->teardown_msi_irq)
-		return;
-
-	return pbm->teardown_msi_irq(virt_irq, pdev);
+	if (pbm->teardown_msi_irq)
+		pbm->teardown_msi_irq(virt_irq, pdev);
 }
 #endif /* !(CONFIG_PCI_MSI) */
 
@@ -1215,5 +1085,3 @@ void pci_resource_to_user(const struct pci_dev *pdev, int bar,
 	*start = rp->start - offset;
 	*end = rp->end - offset;
 }
-
-#endif /* !(CONFIG_PCI) */
diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c
index 09a5ec2..23b8808 100644
--- a/arch/sparc64/kernel/pci_common.c
+++ b/arch/sparc64/kernel/pci_common.c
@@ -314,12 +314,12 @@ struct pci_ops sun4v_pci_ops = {
 
 void pci_get_pbm_props(struct pci_pbm_info *pbm)
 {
-	const u32 *val = of_get_property(pbm->prom_node, "bus-range", NULL);
+	const u32 *val = of_get_property(pbm->op->node, "bus-range", NULL);
 
 	pbm->pci_first_busno = val[0];
 	pbm->pci_last_busno = val[1];
 
-	val = of_get_property(pbm->prom_node, "ino-bitmap", NULL);
+	val = of_get_property(pbm->op->node, "ino-bitmap", NULL);
 	if (val) {
 		pbm->ino_bitmap = (((u64)val[1] << 32UL) |
 				   ((u64)val[0] <<  0UL));
@@ -365,7 +365,7 @@ static void pci_register_legacy_regions(struct resource *io_res,
 
 static void pci_register_iommu_region(struct pci_pbm_info *pbm)
 {
-	const u32 *vdma = of_get_property(pbm->prom_node, "virtual-dma", NULL);
+	const u32 *vdma = of_get_property(pbm->op->node, "virtual-dma", NULL);
 
 	if (vdma) {
 		struct resource *rp = kmalloc(sizeof(*rp), GFP_KERNEL);
@@ -389,7 +389,7 @@ void pci_determine_mem_io_space(struct pci_pbm_info *pbm)
 	int num_pbm_ranges;
 
 	saw_mem = saw_io = 0;
-	pbm_ranges = of_get_property(pbm->prom_node, "ranges", &i);
+	pbm_ranges = of_get_property(pbm->op->node, "ranges", &i);
 	if (!pbm_ranges) {
 		prom_printf("PCI: Fatal error, missing PBM ranges property "
 			    " for %s\n",
diff --git a/arch/sparc64/kernel/pci_fire.c b/arch/sparc64/kernel/pci_fire.c
index d23bb6f..9462b68 100644
--- a/arch/sparc64/kernel/pci_fire.c
+++ b/arch/sparc64/kernel/pci_fire.c
@@ -8,34 +8,16 @@
 #include <linux/init.h>
 #include <linux/msi.h>
 #include <linux/irq.h>
+#include <linux/of_device.h>
 
-#include <asm/oplib.h>
 #include <asm/prom.h>
 #include <asm/irq.h>
+#include <asm/upa.h>
 
 #include "pci_impl.h"
 
-#define fire_read(__reg) \
-({	u64 __ret; \
-	__asm__ __volatile__("ldxa [%1] %2, %0" \
-			     : "=r" (__ret) \
-			     : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
-			     : "memory"); \
-	__ret; \
-})
-#define fire_write(__reg, __val) \
-	__asm__ __volatile__("stxa %0, [%1] %2" \
-			     : /* no outputs */ \
-			     : "r" (__val), "r" (__reg), \
-			       "i" (ASI_PHYS_BYPASS_EC_E) \
-			     : "memory")
-
-static void __init pci_fire_scan_bus(struct pci_pbm_info *pbm)
-{
-	pbm->pci_bus = pci_scan_one_pbm(pbm);
-
-	/* XXX register error interrupt handlers XXX */
-}
+#define DRIVER_NAME	"fire"
+#define PFX		DRIVER_NAME ": "
 
 #define FIRE_IOMMU_CONTROL	0x40000UL
 #define FIRE_IOMMU_TSBBASE	0x40008UL
@@ -69,21 +51,21 @@ static int pci_fire_pbm_iommu_init(struct pci_pbm_info *pbm)
 	/*
 	 * Invalidate TLB Entries.
 	 */
-	fire_write(iommu->iommu_flushinv, ~(u64)0);
+	upa_writeq(~(u64)0, iommu->iommu_flushinv);
 
 	err = iommu_table_init(iommu, tsbsize * 8 * 1024, vdma[0], dma_mask,
 			       pbm->numa_node);
 	if (err)
 		return err;
 
-	fire_write(iommu->iommu_tsbbase, __pa(iommu->page_table) | 0x7UL);
+	upa_writeq(__pa(iommu->page_table) | 0x7UL, iommu->iommu_tsbbase);
 
-	control = fire_read(iommu->iommu_control);
+	control = upa_readq(iommu->iommu_control);
 	control |= (0x00000400 /* TSB cache snoop enable */	|
 		    0x00000300 /* Cache mode */			|
 		    0x00000002 /* Bypass enable */		|
 		    0x00000001 /* Translation enable */);
-	fire_write(iommu->iommu_control, control);
+	upa_writeq(control, iommu->iommu_control);
 
 	return 0;
 }
@@ -165,7 +147,7 @@ struct pci_msiq_entry {
 static int pci_fire_get_head(struct pci_pbm_info *pbm, unsigned long msiqid,
 			     unsigned long *head)
 {
-	*head = fire_read(pbm->pbm_regs + EVENT_QUEUE_HEAD(msiqid));
+	*head = upa_readq(pbm->pbm_regs + EVENT_QUEUE_HEAD(msiqid));
 	return 0;
 }
 
@@ -191,8 +173,7 @@ static int pci_fire_dequeue_msi(struct pci_pbm_info *pbm, unsigned long msiqid,
 	*msi = msi_num = ((ep->word0 & MSIQ_WORD0_DATA0) >>
 			  MSIQ_WORD0_DATA0_SHIFT);
 
-	fire_write(pbm->pbm_regs + MSI_CLEAR(msi_num),
-		   MSI_CLEAR_EQWR_N);
+	upa_writeq(MSI_CLEAR_EQWR_N, pbm->pbm_regs + MSI_CLEAR(msi_num));
 
 	/* Clear the entry.  */
 	ep->word0 &= ~MSIQ_WORD0_FMT_TYPE;
@@ -208,7 +189,7 @@ static int pci_fire_dequeue_msi(struct pci_pbm_info *pbm, unsigned long msiqid,
 static int pci_fire_set_head(struct pci_pbm_info *pbm, unsigned long msiqid,
 			     unsigned long head)
 {
-	fire_write(pbm->pbm_regs + EVENT_QUEUE_HEAD(msiqid), head);
+	upa_writeq(head, pbm->pbm_regs + EVENT_QUEUE_HEAD(msiqid));
 	return 0;
 }
 
@@ -217,17 +198,16 @@ static int pci_fire_msi_setup(struct pci_pbm_info *pbm, unsigned long msiqid,
 {
 	u64 val;
 
-	val = fire_read(pbm->pbm_regs + MSI_MAP(msi));
+	val = upa_readq(pbm->pbm_regs + MSI_MAP(msi));
 	val &= ~(MSI_MAP_EQNUM);
 	val |= msiqid;
-	fire_write(pbm->pbm_regs + MSI_MAP(msi), val);
+	upa_writeq(val, pbm->pbm_regs + MSI_MAP(msi));
 
-	fire_write(pbm->pbm_regs + MSI_CLEAR(msi),
-		   MSI_CLEAR_EQWR_N);
+	upa_writeq(MSI_CLEAR_EQWR_N, pbm->pbm_regs + MSI_CLEAR(msi));
 
-	val = fire_read(pbm->pbm_regs + MSI_MAP(msi));
+	val = upa_readq(pbm->pbm_regs + MSI_MAP(msi));
 	val |= MSI_MAP_VALID;
-	fire_write(pbm->pbm_regs + MSI_MAP(msi), val);
+	upa_writeq(val, pbm->pbm_regs + MSI_MAP(msi));
 
 	return 0;
 }
@@ -237,12 +217,12 @@ static int pci_fire_msi_teardown(struct pci_pbm_info *pbm, unsigned long msi)
 	unsigned long msiqid;
 	u64 val;
 
-	val = fire_read(pbm->pbm_regs + MSI_MAP(msi));
+	val = upa_readq(pbm->pbm_regs + MSI_MAP(msi));
 	msiqid = (val & MSI_MAP_EQNUM);
 
 	val &= ~MSI_MAP_VALID;
 
-	fire_write(pbm->pbm_regs + MSI_MAP(msi), val);
+	upa_writeq(val, pbm->pbm_regs + MSI_MAP(msi));
 
 	return 0;
 }
@@ -261,22 +241,19 @@ static int pci_fire_msiq_alloc(struct pci_pbm_info *pbm)
 	memset((char *)pages, 0, PAGE_SIZE << order);
 	pbm->msi_queues = (void *) pages;
 
-	fire_write(pbm->pbm_regs + EVENT_QUEUE_BASE_ADDR_REG,
-		   (EVENT_QUEUE_BASE_ADDR_ALL_ONES |
-		    __pa(pbm->msi_queues)));
+	upa_writeq((EVENT_QUEUE_BASE_ADDR_ALL_ONES |
+		    __pa(pbm->msi_queues)),
+		   pbm->pbm_regs + EVENT_QUEUE_BASE_ADDR_REG);
 
-	fire_write(pbm->pbm_regs + IMONDO_DATA0,
-		   pbm->portid << 6);
-	fire_write(pbm->pbm_regs + IMONDO_DATA1, 0);
+	upa_writeq(pbm->portid << 6, pbm->pbm_regs + IMONDO_DATA0);
+	upa_writeq(0, pbm->pbm_regs + IMONDO_DATA1);
 
-	fire_write(pbm->pbm_regs + MSI_32BIT_ADDR,
-		   pbm->msi32_start);
-	fire_write(pbm->pbm_regs + MSI_64BIT_ADDR,
-		   pbm->msi64_start);
+	upa_writeq(pbm->msi32_start, pbm->pbm_regs + MSI_32BIT_ADDR);
+	upa_writeq(pbm->msi64_start, pbm->pbm_regs + MSI_64BIT_ADDR);
 
 	for (i = 0; i < pbm->msiq_num; i++) {
-		fire_write(pbm->pbm_regs + EVENT_QUEUE_HEAD(i), 0);
-		fire_write(pbm->pbm_regs + EVENT_QUEUE_TAIL(i), 0);
+		upa_writeq(0, pbm->pbm_regs + EVENT_QUEUE_HEAD(i));
+		upa_writeq(0, pbm->pbm_regs + EVENT_QUEUE_TAIL(i));
 	}
 
 	return 0;
@@ -310,9 +287,9 @@ static int pci_fire_msiq_build_irq(struct pci_pbm_info *pbm,
 	/* XXX iterate amongst the 4 IRQ controllers XXX */
 	int_ctrlr = (1UL << 6);
 
-	val = fire_read(imap_reg);
+	val = upa_readq(imap_reg);
 	val |= (1UL << 63) | int_ctrlr;
-	fire_write(imap_reg, val);
+	upa_writeq(val, imap_reg);
 
 	fixup = ((pbm->portid << 6) | devino) - int_ctrlr;
 
@@ -320,9 +297,8 @@ static int pci_fire_msiq_build_irq(struct pci_pbm_info *pbm,
 	if (!virt_irq)
 		return -ENOMEM;
 
-	fire_write(pbm->pbm_regs +
-		   EVENT_QUEUE_CONTROL_SET(msiqid),
-		   EVENT_QUEUE_CONTROL_SET_EN);
+	upa_writeq(EVENT_QUEUE_CONTROL_SET_EN,
+		   pbm->pbm_regs + EVENT_QUEUE_CONTROL_SET(msiqid));
 
 	return virt_irq;
 }
@@ -390,77 +366,65 @@ static void pci_fire_hw_init(struct pci_pbm_info *pbm)
 {
 	u64 val;
 
-	fire_write(pbm->controller_regs + FIRE_PARITY_CONTROL,
-		   FIRE_PARITY_ENAB);
+	upa_writeq(FIRE_PARITY_ENAB,
+		   pbm->controller_regs + FIRE_PARITY_CONTROL);
 
-	fire_write(pbm->controller_regs + FIRE_FATAL_RESET_CTL,
-		   (FIRE_FATAL_RESET_SPARE |
+	upa_writeq((FIRE_FATAL_RESET_SPARE |
 		    FIRE_FATAL_RESET_MB |
 		    FIRE_FATAL_RESET_CPE |
 		    FIRE_FATAL_RESET_APE |
 		    FIRE_FATAL_RESET_PIO |
 		    FIRE_FATAL_RESET_JW |
 		    FIRE_FATAL_RESET_JI |
-		    FIRE_FATAL_RESET_JR));
+		    FIRE_FATAL_RESET_JR),
+		   pbm->controller_regs + FIRE_FATAL_RESET_CTL);
 
-	fire_write(pbm->controller_regs + FIRE_CORE_INTR_ENABLE, ~(u64)0);
+	upa_writeq(~(u64)0, pbm->controller_regs + FIRE_CORE_INTR_ENABLE);
 
-	val = fire_read(pbm->pbm_regs + FIRE_TLU_CTRL);
+	val = upa_readq(pbm->pbm_regs + FIRE_TLU_CTRL);
 	val |= (FIRE_TLU_CTRL_TIM |
 		FIRE_TLU_CTRL_QDET |
 		FIRE_TLU_CTRL_CFG);
-	fire_write(pbm->pbm_regs + FIRE_TLU_CTRL, val);
-	fire_write(pbm->pbm_regs + FIRE_TLU_DEV_CTRL, 0);
-	fire_write(pbm->pbm_regs + FIRE_TLU_LINK_CTRL,
-		   FIRE_TLU_LINK_CTRL_CLK);
-
-	fire_write(pbm->pbm_regs + FIRE_LPU_RESET, 0);
-	fire_write(pbm->pbm_regs + FIRE_LPU_LLCFG,
-		   FIRE_LPU_LLCFG_VC0);
-	fire_write(pbm->pbm_regs + FIRE_LPU_FCTRL_UCTRL,
-		   (FIRE_LPU_FCTRL_UCTRL_N |
-		    FIRE_LPU_FCTRL_UCTRL_P));
-	fire_write(pbm->pbm_regs + FIRE_LPU_TXL_FIFOP,
-		   ((0xffff << 16) | (0x0000 << 0)));
-	fire_write(pbm->pbm_regs + FIRE_LPU_LTSSM_CFG2, 3000000);
-	fire_write(pbm->pbm_regs + FIRE_LPU_LTSSM_CFG3, 500000);
-	fire_write(pbm->pbm_regs + FIRE_LPU_LTSSM_CFG4,
-		   (2 << 16) | (140 << 8));
-	fire_write(pbm->pbm_regs + FIRE_LPU_LTSSM_CFG5, 0);
-
-	fire_write(pbm->pbm_regs + FIRE_DMC_IENAB, ~(u64)0);
-	fire_write(pbm->pbm_regs + FIRE_DMC_DBG_SEL_A, 0);
-	fire_write(pbm->pbm_regs + FIRE_DMC_DBG_SEL_B, 0);
-
-	fire_write(pbm->pbm_regs + FIRE_PEC_IENAB, ~(u64)0);
+	upa_writeq(val, pbm->pbm_regs + FIRE_TLU_CTRL);
+	upa_writeq(0, pbm->pbm_regs + FIRE_TLU_DEV_CTRL);
+	upa_writeq(FIRE_TLU_LINK_CTRL_CLK,
+		   pbm->pbm_regs + FIRE_TLU_LINK_CTRL);
+
+	upa_writeq(0, pbm->pbm_regs + FIRE_LPU_RESET);
+	upa_writeq(FIRE_LPU_LLCFG_VC0, pbm->pbm_regs + FIRE_LPU_LLCFG);
+	upa_writeq((FIRE_LPU_FCTRL_UCTRL_N | FIRE_LPU_FCTRL_UCTRL_P),
+		   pbm->pbm_regs + FIRE_LPU_FCTRL_UCTRL);
+	upa_writeq(((0xffff << 16) | (0x0000 << 0)),
+		   pbm->pbm_regs + FIRE_LPU_TXL_FIFOP);
+	upa_writeq(3000000, pbm->pbm_regs + FIRE_LPU_LTSSM_CFG2);
+	upa_writeq(500000, pbm->pbm_regs + FIRE_LPU_LTSSM_CFG3);
+	upa_writeq((2 << 16) | (140 << 8),
+		   pbm->pbm_regs + FIRE_LPU_LTSSM_CFG4);
+	upa_writeq(0, pbm->pbm_regs + FIRE_LPU_LTSSM_CFG5);
+
+	upa_writeq(~(u64)0, pbm->pbm_regs + FIRE_DMC_IENAB);
+	upa_writeq(0, pbm->pbm_regs + FIRE_DMC_DBG_SEL_A);
+	upa_writeq(0, pbm->pbm_regs + FIRE_DMC_DBG_SEL_B);
+
+	upa_writeq(~(u64)0, pbm->pbm_regs + FIRE_PEC_IENAB);
 }
 
-static int __init pci_fire_pbm_init(struct pci_controller_info *p,
-				    struct device_node *dp, u32 portid)
+static int __init pci_fire_pbm_init(struct pci_pbm_info *pbm,
+				    struct of_device *op, u32 portid)
 {
 	const struct linux_prom64_registers *regs;
-	struct pci_pbm_info *pbm;
+	struct device_node *dp = op->node;
 	int err;
 
-	if ((portid & 1) == 0)
-		pbm = &p->pbm_A;
-	else
-		pbm = &p->pbm_B;
-
-	pbm->next = pci_pbm_root;
-	pci_pbm_root = pbm;
-
 	pbm->numa_node = -1;
 
-	pbm->scan_bus = pci_fire_scan_bus;
 	pbm->pci_ops = &sun4u_pci_ops;
 	pbm->config_space_reg_bits = 12;
 
 	pbm->index = pci_num_pbms++;
 
 	pbm->portid = portid;
-	pbm->parent = p;
-	pbm->prom_node = dp;
+	pbm->op = op;
 	pbm->name = dp->full_name;
 
 	regs = of_get_property(dp, "reg", NULL);
@@ -481,53 +445,77 @@ static int __init pci_fire_pbm_init(struct pci_controller_info *p,
 
 	pci_fire_msi_init(pbm);
 
-	return 0;
-}
+	pbm->pci_bus = pci_scan_one_pbm(pbm, &op->dev);
+
+	/* XXX register error interrupt handlers XXX */
+
+	pbm->next = pci_pbm_root;
+	pci_pbm_root = pbm;
 
-static inline int portid_compare(u32 x, u32 y)
-{
-	if (x == (y ^ 1))
-		return 1;
 	return 0;
 }
 
-void __init fire_pci_init(struct device_node *dp, const char *model_name)
+static int __devinit fire_probe(struct of_device *op,
+				const struct of_device_id *match)
 {
-	struct pci_controller_info *p;
-	u32 portid = of_getintprop_default(dp, "portid", 0xff);
-	struct iommu *iommu;
+	struct device_node *dp = op->node;
 	struct pci_pbm_info *pbm;
+	struct iommu *iommu;
+	u32 portid;
+	int err;
 
-	for (pbm = pci_pbm_root; pbm; pbm = pbm->next) {
-		if (portid_compare(pbm->portid, portid)) {
-			if (pci_fire_pbm_init(pbm->parent, dp, portid))
-				goto fatal_memory_error;
-			return;
-		}
+	portid = of_getintprop_default(dp, "portid", 0xff);
+
+	err = -ENOMEM;
+	pbm = kzalloc(sizeof(*pbm), GFP_KERNEL);
+	if (!pbm) {
+		printk(KERN_ERR PFX "Cannot allocate pci_pbminfo.\n");
+		goto out_err;
 	}
 
-	p = kzalloc(sizeof(struct pci_controller_info), GFP_ATOMIC);
-	if (!p)
-		goto fatal_memory_error;
+	iommu = kzalloc(sizeof(struct iommu), GFP_KERNEL);
+	if (!iommu) {
+		printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n");
+		goto out_free_controller;
+	}
 
-	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
-	if (!iommu)
-		goto fatal_memory_error;
+	pbm->iommu = iommu;
 
-	p->pbm_A.iommu = iommu;
+	err = pci_fire_pbm_init(pbm, op, portid);
+	if (err)
+		goto out_free_iommu;
 
-	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
-	if (!iommu)
-		goto fatal_memory_error;
+	dev_set_drvdata(&op->dev, pbm);
 
-	p->pbm_B.iommu = iommu;
+	return 0;
 
-	if (pci_fire_pbm_init(p, dp, portid))
-		goto fatal_memory_error;
+out_free_iommu:
+	kfree(pbm->iommu);
+			
+out_free_controller:
+	kfree(pbm);
 
-	return;
+out_err:
+	return err;
+}
+
+static struct of_device_id __initdata fire_match[] = {
+	{
+		.name = "pci",
+		.compatible = "pciex108e,80f0",
+	},
+	{},
+};
 
-fatal_memory_error:
-	prom_printf("PCI_FIRE: Fatal memory allocation error.\n");
-	prom_halt();
+static struct of_platform_driver fire_driver = {
+	.name		= DRIVER_NAME,
+	.match_table	= fire_match,
+	.probe		= fire_probe,
+};
+
+static int __init fire_init(void)
+{
+	return of_register_driver(&fire_driver, &of_bus_type);
 }
+
+subsys_initcall(fire_init);
diff --git a/arch/sparc64/kernel/pci_impl.h b/arch/sparc64/kernel/pci_impl.h
index c385d12..0318682 100644
--- a/arch/sparc64/kernel/pci_impl.h
+++ b/arch/sparc64/kernel/pci_impl.h
@@ -10,6 +10,7 @@
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/msi.h>
+#include <linux/of_device.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/iommu.h>
@@ -56,15 +57,11 @@ struct sparc64_msiq_cookie {
 };
 #endif
 
-struct pci_controller_info;
-
 struct pci_pbm_info {
 	struct pci_pbm_info		*next;
+	struct pci_pbm_info		*sibling;
 	int				index;
 
-	/* PCI controller we sit under. */
-	struct pci_controller_info	*parent;
-
 	/* Physical address base of controller registers. */
 	unsigned long			controller_regs;
 
@@ -94,7 +91,7 @@ struct pci_pbm_info {
 	char				*name;
 
 	/* OBP specific information. */
-	struct device_node		*prom_node;
+	struct of_device		*op;
 	u64				ino_bitmap;
 
 	/* PBM I/O and Memory space resources. */
@@ -107,6 +104,10 @@ struct pci_pbm_info {
 	/* This will be 12 on PCI-E controllers, 8 elsewhere.  */
 	unsigned long			config_space_reg_bits;
 
+	unsigned long			pci_afsr;
+	unsigned long			pci_afar;
+	unsigned long			pci_csr;
+
 	/* State of 66MHz capabilities on this PBM. */
 	int				is_66mhz_capable;
 	int				all_devs_66mhz;
@@ -146,25 +147,19 @@ struct pci_pbm_info {
 	unsigned int			pci_first_busno;
 	unsigned int			pci_last_busno;
 	struct pci_bus			*pci_bus;
-	void (*scan_bus)(struct pci_pbm_info *);
 	struct pci_ops			*pci_ops;
 
 	int				numa_node;
 };
 
-struct pci_controller_info {
-	/* The PCI bus modules controlled by us. */
-	struct pci_pbm_info		pbm_A;
-	struct pci_pbm_info		pbm_B;
-};
-
 extern struct pci_pbm_info *pci_pbm_root;
 
 extern int pci_num_pbms;
 
 /* PCI bus scanning and fixup support. */
 extern void pci_get_pbm_props(struct pci_pbm_info *pbm);
-extern struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm);
+extern struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm,
+					struct device *parent);
 extern void pci_determine_mem_io_space(struct pci_pbm_info *pbm);
 
 /* Error reporting support. */
@@ -183,4 +178,8 @@ extern void pci_config_write32(u32 *addr, u32 val);
 extern struct pci_ops sun4u_pci_ops;
 extern struct pci_ops sun4v_pci_ops;
 
+extern volatile int pci_poke_in_progress;
+extern volatile int pci_poke_cpu;
+extern volatile int pci_poke_faulted;
+
 #endif /* !(PCI_IMPL_H) */
diff --git a/arch/sparc64/kernel/pci_msi.c b/arch/sparc64/kernel/pci_msi.c
index 60c71e3..2e680f3 100644
--- a/arch/sparc64/kernel/pci_msi.c
+++ b/arch/sparc64/kernel/pci_msi.c
@@ -323,7 +323,7 @@ void sparc64_pbm_msi_init(struct pci_pbm_info *pbm,
 	const u32 *val;
 	int len;
 
-	val = of_get_property(pbm->prom_node, "#msi-eqs", &len);
+	val = of_get_property(pbm->op->node, "#msi-eqs", &len);
 	if (!val || len != 4)
 		goto no_msi;
 	pbm->msiq_num = *val;
@@ -346,16 +346,16 @@ void sparc64_pbm_msi_init(struct pci_pbm_info *pbm,
 			u32 msi64_len;
 		} *arng;
 
-		val = of_get_property(pbm->prom_node, "msi-eq-size", &len);
+		val = of_get_property(pbm->op->node, "msi-eq-size", &len);
 		if (!val || len != 4)
 			goto no_msi;
 
 		pbm->msiq_ent_count = *val;
 
-		mqp = of_get_property(pbm->prom_node,
+		mqp = of_get_property(pbm->op->node,
 				      "msi-eq-to-devino", &len);
 		if (!mqp)
-			mqp = of_get_property(pbm->prom_node,
+			mqp = of_get_property(pbm->op->node,
 					      "msi-eq-devino", &len);
 		if (!mqp || len != sizeof(struct msiq_prop))
 			goto no_msi;
@@ -363,27 +363,27 @@ void sparc64_pbm_msi_init(struct pci_pbm_info *pbm,
 		pbm->msiq_first = mqp->first_msiq;
 		pbm->msiq_first_devino = mqp->first_devino;
 
-		val = of_get_property(pbm->prom_node, "#msi", &len);
+		val = of_get_property(pbm->op->node, "#msi", &len);
 		if (!val || len != 4)
 			goto no_msi;
 		pbm->msi_num = *val;
 
-		mrng = of_get_property(pbm->prom_node, "msi-ranges", &len);
+		mrng = of_get_property(pbm->op->node, "msi-ranges", &len);
 		if (!mrng || len != sizeof(struct msi_range_prop))
 			goto no_msi;
 		pbm->msi_first = mrng->first_msi;
 
-		val = of_get_property(pbm->prom_node, "msi-data-mask", &len);
+		val = of_get_property(pbm->op->node, "msi-data-mask", &len);
 		if (!val || len != 4)
 			goto no_msi;
 		pbm->msi_data_mask = *val;
 
-		val = of_get_property(pbm->prom_node, "msix-data-width", &len);
+		val = of_get_property(pbm->op->node, "msix-data-width", &len);
 		if (!val || len != 4)
 			goto no_msi;
 		pbm->msix_data_width = *val;
 
-		arng = of_get_property(pbm->prom_node, "msi-address-ranges",
+		arng = of_get_property(pbm->op->node, "msi-address-ranges",
 				       &len);
 		if (!arng || len != sizeof(struct addr_range_prop))
 			goto no_msi;
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index f85b6be..dfb3ec8 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -17,29 +17,14 @@
 #include <asm/irq.h>
 #include <asm/starfire.h>
 #include <asm/prom.h>
-#include <asm/oplib.h>
+#include <asm/upa.h>
 
 #include "pci_impl.h"
 #include "iommu_common.h"
+#include "psycho_common.h"
 
-/* All PSYCHO registers are 64-bits.  The following accessor
- * routines are how they are accessed.  The REG parameter
- * is a physical address.
- */
-#define psycho_read(__reg) \
-({	u64 __ret; \
-	__asm__ __volatile__("ldxa [%1] %2, %0" \
-			     : "=r" (__ret) \
-			     : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
-			     : "memory"); \
-	__ret; \
-})
-#define psycho_write(__reg, __val) \
-	__asm__ __volatile__("stxa %0, [%1] %2" \
-			     : /* no outputs */ \
-			     : "r" (__val), "r" (__reg), \
-			       "i" (ASI_PHYS_BYPASS_EC_E) \
-			     : "memory")
+#define DRIVER_NAME	"psycho"
+#define PFX		DRIVER_NAME ": "
 
 /* Misc. PSYCHO PCI controller register offsets and definitions. */
 #define PSYCHO_CONTROL		0x0010UL
@@ -67,37 +52,7 @@
 #define  PSYCHO_PCICTRL_RESV4	 0x00000000000000c0UL /* Reserved                     */
 #define  PSYCHO_PCICTRL_AEN	 0x000000000000003fUL /* PCI DVMA Arbitration Enable  */
 
-/* U2P Programmer's Manual, page 13-55, configuration space
- * address format:
- * 
- *  32             24 23 16 15    11 10       8 7   2  1 0
- * ---------------------------------------------------------
- * |0 0 0 0 0 0 0 0 1| bus | device | function | reg | 0 0 |
- * ---------------------------------------------------------
- */
-#define PSYCHO_CONFIG_BASE(PBM)	\
-	((PBM)->config_space | (1UL << 24))
-#define PSYCHO_CONFIG_ENCODE(BUS, DEVFN, REG)	\
-	(((unsigned long)(BUS)   << 16) |	\
-	 ((unsigned long)(DEVFN) << 8)  |	\
-	 ((unsigned long)(REG)))
-
-static void *psycho_pci_config_mkaddr(struct pci_pbm_info *pbm,
-				      unsigned char bus,
-				      unsigned int devfn,
-				      int where)
-{
-	if (!pbm)
-		return NULL;
-	return (void *)
-		(PSYCHO_CONFIG_BASE(pbm) |
-		 PSYCHO_CONFIG_ENCODE(bus, devfn, where));
-}
-
 /* PSYCHO error handling support. */
-enum psycho_error_type {
-	UE_ERR, CE_ERR, PCI_ERR
-};
 
 /* Helper function of IOMMU error checking, which checks out
  * the state of the streaming buffers.  The IOMMU lock is
@@ -122,129 +77,10 @@ enum psycho_error_type {
 #define PSYCHO_STC_DATA_B	0xc000UL
 #define PSYCHO_STC_ERR_A	0xb400UL
 #define PSYCHO_STC_ERR_B	0xc400UL
-#define  PSYCHO_STCERR_WRITE	 0x0000000000000002UL	/* Write Error */
-#define  PSYCHO_STCERR_READ	 0x0000000000000001UL	/* Read Error */
 #define PSYCHO_STC_TAG_A	0xb800UL
 #define PSYCHO_STC_TAG_B	0xc800UL
-#define  PSYCHO_STCTAG_PPN	 0x0fffffff00000000UL	/* Physical Page Number */
-#define  PSYCHO_STCTAG_VPN	 0x00000000ffffe000UL	/* Virtual Page Number */
-#define  PSYCHO_STCTAG_VALID	 0x0000000000000002UL	/* Valid */
-#define  PSYCHO_STCTAG_WRITE	 0x0000000000000001UL	/* Writable */
 #define PSYCHO_STC_LINE_A	0xb900UL
 #define PSYCHO_STC_LINE_B	0xc900UL
-#define  PSYCHO_STCLINE_LINDX	 0x0000000001e00000UL	/* LRU Index */
-#define  PSYCHO_STCLINE_SPTR	 0x00000000001f8000UL	/* Dirty Data Start Pointer */
-#define  PSYCHO_STCLINE_LADDR	 0x0000000000007f00UL	/* Line Address */
-#define  PSYCHO_STCLINE_EPTR	 0x00000000000000fcUL	/* Dirty Data End Pointer */
-#define  PSYCHO_STCLINE_VALID	 0x0000000000000002UL	/* Valid */
-#define  PSYCHO_STCLINE_FOFN	 0x0000000000000001UL	/* Fetch Outstanding / Flush Necessary */
-
-static DEFINE_SPINLOCK(stc_buf_lock);
-static unsigned long stc_error_buf[128];
-static unsigned long stc_tag_buf[16];
-static unsigned long stc_line_buf[16];
-
-static void __psycho_check_one_stc(struct pci_pbm_info *pbm,
-				   int is_pbm_a)
-{
-	struct strbuf *strbuf = &pbm->stc;
-	unsigned long regbase = pbm->controller_regs;
-	unsigned long err_base, tag_base, line_base;
-	u64 control;
-	int i;
-
-	if (is_pbm_a) {
-		err_base = regbase + PSYCHO_STC_ERR_A;
-		tag_base = regbase + PSYCHO_STC_TAG_A;
-		line_base = regbase + PSYCHO_STC_LINE_A;
-	} else {
-		err_base = regbase + PSYCHO_STC_ERR_B;
-		tag_base = regbase + PSYCHO_STC_TAG_B;
-		line_base = regbase + PSYCHO_STC_LINE_B;
-	}
-
-	spin_lock(&stc_buf_lock);
-
-	/* This is __REALLY__ dangerous.  When we put the
-	 * streaming buffer into diagnostic mode to probe
-	 * it's tags and error status, we _must_ clear all
-	 * of the line tag valid bits before re-enabling
-	 * the streaming buffer.  If any dirty data lives
-	 * in the STC when we do this, we will end up
-	 * invalidating it before it has a chance to reach
-	 * main memory.
-	 */
-	control = psycho_read(strbuf->strbuf_control);
-	psycho_write(strbuf->strbuf_control,
-		     (control | PSYCHO_STRBUF_CTRL_DENAB));
-	for (i = 0; i < 128; i++) {
-		unsigned long val;
-
-		val = psycho_read(err_base + (i * 8UL));
-		psycho_write(err_base + (i * 8UL), 0UL);
-		stc_error_buf[i] = val;
-	}
-	for (i = 0; i < 16; i++) {
-		stc_tag_buf[i] = psycho_read(tag_base + (i * 8UL));
-		stc_line_buf[i] = psycho_read(line_base + (i * 8UL));
-		psycho_write(tag_base + (i * 8UL), 0UL);
-		psycho_write(line_base + (i * 8UL), 0UL);
-	}
-
-	/* OK, state is logged, exit diagnostic mode. */
-	psycho_write(strbuf->strbuf_control, control);
-
-	for (i = 0; i < 16; i++) {
-		int j, saw_error, first, last;
-
-		saw_error = 0;
-		first = i * 8;
-		last = first + 8;
-		for (j = first; j < last; j++) {
-			unsigned long errval = stc_error_buf[j];
-			if (errval != 0) {
-				saw_error++;
-				printk("%s: STC_ERR(%d)[wr(%d)rd(%d)]\n",
-				       pbm->name,
-				       j,
-				       (errval & PSYCHO_STCERR_WRITE) ? 1 : 0,
-				       (errval & PSYCHO_STCERR_READ) ? 1 : 0);
-			}
-		}
-		if (saw_error != 0) {
-			unsigned long tagval = stc_tag_buf[i];
-			unsigned long lineval = stc_line_buf[i];
-			printk("%s: STC_TAG(%d)[PA(%016lx)VA(%08lx)V(%d)W(%d)]\n",
-			       pbm->name,
-			       i,
-			       ((tagval & PSYCHO_STCTAG_PPN) >> 19UL),
-			       (tagval & PSYCHO_STCTAG_VPN),
-			       ((tagval & PSYCHO_STCTAG_VALID) ? 1 : 0),
-			       ((tagval & PSYCHO_STCTAG_WRITE) ? 1 : 0));
-			printk("%s: STC_LINE(%d)[LIDX(%lx)SP(%lx)LADDR(%lx)EP(%lx)"
-			       "V(%d)FOFN(%d)]\n",
-			       pbm->name,
-			       i,
-			       ((lineval & PSYCHO_STCLINE_LINDX) >> 21UL),
-			       ((lineval & PSYCHO_STCLINE_SPTR) >> 15UL),
-			       ((lineval & PSYCHO_STCLINE_LADDR) >> 8UL),
-			       ((lineval & PSYCHO_STCLINE_EPTR) >> 2UL),
-			       ((lineval & PSYCHO_STCLINE_VALID) ? 1 : 0),
-			       ((lineval & PSYCHO_STCLINE_FOFN) ? 1 : 0));
-		}
-	}
-
-	spin_unlock(&stc_buf_lock);
-}
-
-static void __psycho_check_stc_error(struct pci_pbm_info *pbm,
-				     unsigned long afsr,
-				     unsigned long afar,
-				     enum psycho_error_type type)
-{
-	__psycho_check_one_stc(pbm,
-			       (pbm == &pbm->parent->pbm_A));
-}
 
 /* When an Uncorrectable Error or a PCI Error happens, we
  * interrogate the IOMMU state to see if it is the cause.
@@ -271,122 +107,7 @@ static void __psycho_check_stc_error(struct pci_pbm_info *pbm,
 #define PSYCHO_IOMMU_TSBBASE	0x0208UL
 #define PSYCHO_IOMMU_FLUSH	0x0210UL
 #define PSYCHO_IOMMU_TAG	0xa580UL
-#define  PSYCHO_IOMMU_TAG_ERRSTS (0x3UL << 23UL)
-#define  PSYCHO_IOMMU_TAG_ERR	 (0x1UL << 22UL)
-#define  PSYCHO_IOMMU_TAG_WRITE	 (0x1UL << 21UL)
-#define  PSYCHO_IOMMU_TAG_STREAM (0x1UL << 20UL)
-#define  PSYCHO_IOMMU_TAG_SIZE	 (0x1UL << 19UL)
-#define  PSYCHO_IOMMU_TAG_VPAGE	 0x7ffffUL
 #define PSYCHO_IOMMU_DATA	0xa600UL
-#define  PSYCHO_IOMMU_DATA_VALID (1UL << 30UL)
-#define  PSYCHO_IOMMU_DATA_CACHE (1UL << 28UL)
-#define  PSYCHO_IOMMU_DATA_PPAGE 0xfffffffUL
-static void psycho_check_iommu_error(struct pci_pbm_info *pbm,
-				     unsigned long afsr,
-				     unsigned long afar,
-				     enum psycho_error_type type)
-{
-	struct iommu *iommu = pbm->iommu;
-	unsigned long iommu_tag[16];
-	unsigned long iommu_data[16];
-	unsigned long flags;
-	u64 control;
-	int i;
-
-	spin_lock_irqsave(&iommu->lock, flags);
-	control = psycho_read(iommu->iommu_control);
-	if (control & PSYCHO_IOMMU_CTRL_XLTEERR) {
-		char *type_string;
-
-		/* Clear the error encountered bit. */
-		control &= ~PSYCHO_IOMMU_CTRL_XLTEERR;
-		psycho_write(iommu->iommu_control, control);
-
-		switch((control & PSYCHO_IOMMU_CTRL_XLTESTAT) >> 25UL) {
-		case 0:
-			type_string = "Protection Error";
-			break;
-		case 1:
-			type_string = "Invalid Error";
-			break;
-		case 2:
-			type_string = "TimeOut Error";
-			break;
-		case 3:
-		default:
-			type_string = "ECC Error";
-			break;
-		};
-		printk("%s: IOMMU Error, type[%s]\n",
-		       pbm->name, type_string);
-
-		/* Put the IOMMU into diagnostic mode and probe
-		 * it's TLB for entries with error status.
-		 *
-		 * It is very possible for another DVMA to occur
-		 * while we do this probe, and corrupt the system
-		 * further.  But we are so screwed at this point
-		 * that we are likely to crash hard anyways, so
-		 * get as much diagnostic information to the
-		 * console as we can.
-		 */
-		psycho_write(iommu->iommu_control,
-			     control | PSYCHO_IOMMU_CTRL_DENAB);
-		for (i = 0; i < 16; i++) {
-			unsigned long base = pbm->controller_regs;
-
-			iommu_tag[i] =
-				psycho_read(base + PSYCHO_IOMMU_TAG + (i * 8UL));
-			iommu_data[i] =
-				psycho_read(base + PSYCHO_IOMMU_DATA + (i * 8UL));
-
-			/* Now clear out the entry. */
-			psycho_write(base + PSYCHO_IOMMU_TAG + (i * 8UL), 0);
-			psycho_write(base + PSYCHO_IOMMU_DATA + (i * 8UL), 0);
-		}
-
-		/* Leave diagnostic mode. */
-		psycho_write(iommu->iommu_control, control);
-
-		for (i = 0; i < 16; i++) {
-			unsigned long tag, data;
-
-			tag = iommu_tag[i];
-			if (!(tag & PSYCHO_IOMMU_TAG_ERR))
-				continue;
-
-			data = iommu_data[i];
-			switch((tag & PSYCHO_IOMMU_TAG_ERRSTS) >> 23UL) {
-			case 0:
-				type_string = "Protection Error";
-				break;
-			case 1:
-				type_string = "Invalid Error";
-				break;
-			case 2:
-				type_string = "TimeOut Error";
-				break;
-			case 3:
-			default:
-				type_string = "ECC Error";
-				break;
-			};
-			printk("%s: IOMMU TAG(%d)[error(%s) wr(%d) str(%d) sz(%dK) vpg(%08lx)]\n",
-			       pbm->name, i, type_string,
-			       ((tag & PSYCHO_IOMMU_TAG_WRITE) ? 1 : 0),
-			       ((tag & PSYCHO_IOMMU_TAG_STREAM) ? 1 : 0),
-			       ((tag & PSYCHO_IOMMU_TAG_SIZE) ? 64 : 8),
-			       (tag & PSYCHO_IOMMU_TAG_VPAGE) << IOMMU_PAGE_SHIFT);
-			printk("%s: IOMMU DATA(%d)[valid(%d) cache(%d) ppg(%016lx)]\n",
-			       pbm->name, i,
-			       ((data & PSYCHO_IOMMU_DATA_VALID) ? 1 : 0),
-			       ((data & PSYCHO_IOMMU_DATA_CACHE) ? 1 : 0),
-			       (data & PSYCHO_IOMMU_DATA_PPAGE) << IOMMU_PAGE_SHIFT);
-		}
-	}
-	__psycho_check_stc_error(pbm, afsr, afar, type);
-	spin_unlock_irqrestore(&iommu->lock, flags);
-}
 
 /* Uncorrectable Errors.  Cause of the error and the address are
  * recorded in the UE_AFSR and UE_AFAR of PSYCHO.  They are errors
@@ -410,15 +131,14 @@ static void psycho_check_iommu_error(struct pci_pbm_info *pbm,
 static irqreturn_t psycho_ue_intr(int irq, void *dev_id)
 {
 	struct pci_pbm_info *pbm = dev_id;
-	struct pci_controller_info *p = pbm->parent;
 	unsigned long afsr_reg = pbm->controller_regs + PSYCHO_UE_AFSR;
 	unsigned long afar_reg = pbm->controller_regs + PSYCHO_UE_AFAR;
 	unsigned long afsr, afar, error_bits;
 	int reported;
 
 	/* Latch uncorrectable error status. */
-	afar = psycho_read(afar_reg);
-	afsr = psycho_read(afsr_reg);
+	afar = upa_readq(afar_reg);
+	afsr = upa_readq(afsr_reg);
 
 	/* Clear the primary/secondary error status bits. */
 	error_bits = afsr &
@@ -426,7 +146,7 @@ static irqreturn_t psycho_ue_intr(int irq, void *dev_id)
 		 PSYCHO_UEAFSR_SPIO | PSYCHO_UEAFSR_SDRD | PSYCHO_UEAFSR_SDWR);
 	if (!error_bits)
 		return IRQ_NONE;
-	psycho_write(afsr_reg, error_bits);
+	upa_writeq(error_bits, afsr_reg);
 
 	/* Log the error. */
 	printk("%s: Uncorrectable Error, primary error type[%s]\n",
@@ -463,8 +183,9 @@ static irqreturn_t psycho_ue_intr(int irq, void *dev_id)
 	printk("]\n");
 
 	/* Interrogate both IOMMUs for error status. */
-	psycho_check_iommu_error(&p->pbm_A, afsr, afar, UE_ERR);
-	psycho_check_iommu_error(&p->pbm_B, afsr, afar, UE_ERR);
+	psycho_check_iommu_error(pbm, afsr, afar, UE_ERR);
+	if (pbm->sibling)
+		psycho_check_iommu_error(pbm->sibling, afsr, afar, UE_ERR);
 
 	return IRQ_HANDLED;
 }
@@ -495,8 +216,8 @@ static irqreturn_t psycho_ce_intr(int irq, void *dev_id)
 	int reported;
 
 	/* Latch error status. */
-	afar = psycho_read(afar_reg);
-	afsr = psycho_read(afsr_reg);
+	afar = upa_readq(afar_reg);
+	afsr = upa_readq(afsr_reg);
 
 	/* Clear primary/secondary error status bits. */
 	error_bits = afsr &
@@ -504,7 +225,7 @@ static irqreturn_t psycho_ce_intr(int irq, void *dev_id)
 		 PSYCHO_CEAFSR_SPIO | PSYCHO_CEAFSR_SDRD | PSYCHO_CEAFSR_SDWR);
 	if (!error_bits)
 		return IRQ_NONE;
-	psycho_write(afsr_reg, error_bits);
+	upa_writeq(error_bits, afsr_reg);
 
 	/* Log the error. */
 	printk("%s: Correctable Error, primary error type[%s]\n",
@@ -554,164 +275,9 @@ static irqreturn_t psycho_ce_intr(int irq, void *dev_id)
  */
 #define PSYCHO_PCI_AFSR_A	0x2010UL
 #define PSYCHO_PCI_AFSR_B	0x4010UL
-#define  PSYCHO_PCIAFSR_PMA	0x8000000000000000UL /* Primary Master Abort Error   */
-#define  PSYCHO_PCIAFSR_PTA	0x4000000000000000UL /* Primary Target Abort Error   */
-#define  PSYCHO_PCIAFSR_PRTRY	0x2000000000000000UL /* Primary Excessive Retries    */
-#define  PSYCHO_PCIAFSR_PPERR	0x1000000000000000UL /* Primary Parity Error         */
-#define  PSYCHO_PCIAFSR_SMA	0x0800000000000000UL /* Secondary Master Abort Error */
-#define  PSYCHO_PCIAFSR_STA	0x0400000000000000UL /* Secondary Target Abort Error */
-#define  PSYCHO_PCIAFSR_SRTRY	0x0200000000000000UL /* Secondary Excessive Retries  */
-#define  PSYCHO_PCIAFSR_SPERR	0x0100000000000000UL /* Secondary Parity Error       */
-#define  PSYCHO_PCIAFSR_RESV1	0x00ff000000000000UL /* Reserved                     */
-#define  PSYCHO_PCIAFSR_BMSK	0x0000ffff00000000UL /* Bytemask of failed transfer  */
-#define  PSYCHO_PCIAFSR_BLK	0x0000000080000000UL /* Trans was block operation    */
-#define  PSYCHO_PCIAFSR_RESV2	0x0000000040000000UL /* Reserved                     */
-#define  PSYCHO_PCIAFSR_MID	0x000000003e000000UL /* MID causing the error        */
-#define  PSYCHO_PCIAFSR_RESV3	0x0000000001ffffffUL /* Reserved                     */
 #define PSYCHO_PCI_AFAR_A	0x2018UL
 #define PSYCHO_PCI_AFAR_B	0x4018UL
 
-static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm_a)
-{
-	unsigned long csr_reg, csr, csr_error_bits;
-	irqreturn_t ret = IRQ_NONE;
-	u16 stat, *addr;
-
-	if (is_pbm_a) {
-		csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL;
-	} else {
-		csr_reg = pbm->controller_regs + PSYCHO_PCIB_CTRL;
-	}
-	csr = psycho_read(csr_reg);
-	csr_error_bits =
-		csr & (PSYCHO_PCICTRL_SBH_ERR | PSYCHO_PCICTRL_SERR);
-	if (csr_error_bits) {
-		/* Clear the errors.  */
-		psycho_write(csr_reg, csr);
-
-		/* Log 'em.  */
-		if (csr_error_bits & PSYCHO_PCICTRL_SBH_ERR)
-			printk("%s: PCI streaming byte hole error asserted.\n",
-			       pbm->name);
-		if (csr_error_bits & PSYCHO_PCICTRL_SERR)
-			printk("%s: PCI SERR signal asserted.\n", pbm->name);
-		ret = IRQ_HANDLED;
-	}
-	addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
-					0, PCI_STATUS);
-	pci_config_read16(addr, &stat);
-	if (stat & (PCI_STATUS_PARITY |
-		    PCI_STATUS_SIG_TARGET_ABORT |
-		    PCI_STATUS_REC_TARGET_ABORT |
-		    PCI_STATUS_REC_MASTER_ABORT |
-		    PCI_STATUS_SIG_SYSTEM_ERROR)) {
-		printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
-		       pbm->name, stat);
-		pci_config_write16(addr, 0xffff);
-		ret = IRQ_HANDLED;
-	}
-	return ret;
-}
-
-static irqreturn_t psycho_pcierr_intr(int irq, void *dev_id)
-{
-	struct pci_pbm_info *pbm = dev_id;
-	struct pci_controller_info *p = pbm->parent;
-	unsigned long afsr_reg, afar_reg;
-	unsigned long afsr, afar, error_bits;
-	int is_pbm_a, reported;
-
-	is_pbm_a = (pbm == &pbm->parent->pbm_A);
-	if (is_pbm_a) {
-		afsr_reg = p->pbm_A.controller_regs + PSYCHO_PCI_AFSR_A;
-		afar_reg = p->pbm_A.controller_regs + PSYCHO_PCI_AFAR_A;
-	} else {
-		afsr_reg = p->pbm_A.controller_regs + PSYCHO_PCI_AFSR_B;
-		afar_reg = p->pbm_A.controller_regs + PSYCHO_PCI_AFAR_B;
-	}
-
-	/* Latch error status. */
-	afar = psycho_read(afar_reg);
-	afsr = psycho_read(afsr_reg);
-
-	/* Clear primary/secondary error status bits. */
-	error_bits = afsr &
-		(PSYCHO_PCIAFSR_PMA | PSYCHO_PCIAFSR_PTA |
-		 PSYCHO_PCIAFSR_PRTRY | PSYCHO_PCIAFSR_PPERR |
-		 PSYCHO_PCIAFSR_SMA | PSYCHO_PCIAFSR_STA |
-		 PSYCHO_PCIAFSR_SRTRY | PSYCHO_PCIAFSR_SPERR);
-	if (!error_bits)
-		return psycho_pcierr_intr_other(pbm, is_pbm_a);
-	psycho_write(afsr_reg, error_bits);
-
-	/* Log the error. */
-	printk("%s: PCI Error, primary error type[%s]\n",
-	       pbm->name,
-	       (((error_bits & PSYCHO_PCIAFSR_PMA) ?
-		 "Master Abort" :
-		 ((error_bits & PSYCHO_PCIAFSR_PTA) ?
-		  "Target Abort" :
-		  ((error_bits & PSYCHO_PCIAFSR_PRTRY) ?
-		   "Excessive Retries" :
-		   ((error_bits & PSYCHO_PCIAFSR_PPERR) ?
-		    "Parity Error" : "???"))))));
-	printk("%s: bytemask[%04lx] UPA_MID[%02lx] was_block(%d)\n",
-	       pbm->name,
-	       (afsr & PSYCHO_PCIAFSR_BMSK) >> 32UL,
-	       (afsr & PSYCHO_PCIAFSR_MID) >> 25UL,
-	       (afsr & PSYCHO_PCIAFSR_BLK) ? 1 : 0);
-	printk("%s: PCI AFAR [%016lx]\n", pbm->name, afar);
-	printk("%s: PCI Secondary errors [", pbm->name);
-	reported = 0;
-	if (afsr & PSYCHO_PCIAFSR_SMA) {
-		reported++;
-		printk("(Master Abort)");
-	}
-	if (afsr & PSYCHO_PCIAFSR_STA) {
-		reported++;
-		printk("(Target Abort)");
-	}
-	if (afsr & PSYCHO_PCIAFSR_SRTRY) {
-		reported++;
-		printk("(Excessive Retries)");
-	}
-	if (afsr & PSYCHO_PCIAFSR_SPERR) {
-		reported++;
-		printk("(Parity Error)");
-	}
-	if (!reported)
-		printk("(none)");
-	printk("]\n");
-
-	/* For the error types shown, scan PBM's PCI bus for devices
-	 * which have logged that error type.
-	 */
-
-	/* If we see a Target Abort, this could be the result of an
-	 * IOMMU translation error of some sort.  It is extremely
-	 * useful to log this information as usually it indicates
-	 * a bug in the IOMMU support code or a PCI device driver.
-	 */
-	if (error_bits & (PSYCHO_PCIAFSR_PTA | PSYCHO_PCIAFSR_STA)) {
-		psycho_check_iommu_error(pbm, afsr, afar, PCI_ERR);
-		pci_scan_for_target_abort(pbm, pbm->pci_bus);
-	}
-	if (error_bits & (PSYCHO_PCIAFSR_PMA | PSYCHO_PCIAFSR_SMA))
-		pci_scan_for_master_abort(pbm, pbm->pci_bus);
-
-	/* For excessive retries, PSYCHO/PBM will abort the device
-	 * and there is no way to specifically check for excessive
-	 * retries in the config space status registers.  So what
-	 * we hope is that we'll catch it via the master/target
-	 * abort events.
-	 */
-
-	if (error_bits & (PSYCHO_PCIAFSR_PPERR | PSYCHO_PCIAFSR_SPERR))
-		pci_scan_for_parity_error(pbm, pbm->pci_bus);
-
-	return IRQ_HANDLED;
-}
-
 /* XXX What about PowerFail/PowerManagement??? -DaveM */
 #define PSYCHO_ECC_CTRL		0x0020
 #define  PSYCHO_ECCCTRL_EE	 0x8000000000000000UL /* Enable ECC Checking */
@@ -719,7 +285,7 @@ static irqreturn_t psycho_pcierr_intr(int irq, void *dev_id)
 #define  PSYCHO_ECCCTRL_CE	 0x2000000000000000UL /* Enable CE INterrupts */
 static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct of_device *op = of_find_device_by_node(pbm->prom_node);
+	struct of_device *op = of_find_device_by_node(pbm->op->node);
 	unsigned long base = pbm->controller_regs;
 	u64 tmp;
 	int err;
@@ -762,27 +328,26 @@ static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
 		       "err=%d\n", pbm->name, err);
 
 	/* Enable UE and CE interrupts for controller. */
-	psycho_write(base + PSYCHO_ECC_CTRL,
-		     (PSYCHO_ECCCTRL_EE |
-		      PSYCHO_ECCCTRL_UE |
-		      PSYCHO_ECCCTRL_CE));
+	upa_writeq((PSYCHO_ECCCTRL_EE |
+		    PSYCHO_ECCCTRL_UE |
+		    PSYCHO_ECCCTRL_CE), base + PSYCHO_ECC_CTRL);
 
 	/* Enable PCI Error interrupts and clear error
 	 * bits for each PBM.
 	 */
-	tmp = psycho_read(base + PSYCHO_PCIA_CTRL);
+	tmp = upa_readq(base + PSYCHO_PCIA_CTRL);
 	tmp |= (PSYCHO_PCICTRL_SERR |
 		PSYCHO_PCICTRL_SBH_ERR |
 		PSYCHO_PCICTRL_EEN);
 	tmp &= ~(PSYCHO_PCICTRL_SBH_INT);
-	psycho_write(base + PSYCHO_PCIA_CTRL, tmp);
+	upa_writeq(tmp, base + PSYCHO_PCIA_CTRL);
 		     
-	tmp = psycho_read(base + PSYCHO_PCIB_CTRL);
+	tmp = upa_readq(base + PSYCHO_PCIB_CTRL);
 	tmp |= (PSYCHO_PCICTRL_SERR |
 		PSYCHO_PCICTRL_SBH_ERR |
 		PSYCHO_PCICTRL_EEN);
 	tmp &= ~(PSYCHO_PCICTRL_SBH_INT);
-	psycho_write(base + PSYCHO_PCIB_CTRL, tmp);
+	upa_writeq(tmp, base + PSYCHO_PCIB_CTRL);
 }
 
 /* PSYCHO boot time probing and initialization. */
@@ -803,11 +368,12 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm)
 	pci_config_write8(addr, 64);
 }
 
-static void __init psycho_scan_bus(struct pci_pbm_info *pbm)
+static void __init psycho_scan_bus(struct pci_pbm_info *pbm,
+				   struct device *parent)
 {
 	pbm_config_busmastering(pbm);
 	pbm->is_66mhz_capable = 0;
-	pbm->pci_bus = pci_scan_one_pbm(pbm);
+	pbm->pci_bus = pci_scan_one_pbm(pbm, parent);
 
 	/* After the PCI bus scan is complete, we can register
 	 * the error interrupt handlers.
@@ -815,61 +381,6 @@ static void __init psycho_scan_bus(struct pci_pbm_info *pbm)
 	psycho_register_error_handlers(pbm);
 }
 
-static int psycho_iommu_init(struct pci_pbm_info *pbm)
-{
-	struct iommu *iommu = pbm->iommu;
-	unsigned long i;
-	u64 control;
-	int err;
-
-	/* Register addresses. */
-	iommu->iommu_control  = pbm->controller_regs + PSYCHO_IOMMU_CONTROL;
-	iommu->iommu_tsbbase  = pbm->controller_regs + PSYCHO_IOMMU_TSBBASE;
-	iommu->iommu_flush    = pbm->controller_regs + PSYCHO_IOMMU_FLUSH;
-	iommu->iommu_tags     = iommu->iommu_flush + (0xa580UL - 0x0210UL);
-
-	/* PSYCHO's IOMMU lacks ctx flushing. */
-	iommu->iommu_ctxflush = 0;
-
-	/* We use the main control register of PSYCHO as the write
-	 * completion register.
-	 */
-	iommu->write_complete_reg = pbm->controller_regs + PSYCHO_CONTROL;
-
-	/*
-	 * Invalidate TLB Entries.
-	 */
-	control = psycho_read(pbm->controller_regs + PSYCHO_IOMMU_CONTROL);
-	control |= PSYCHO_IOMMU_CTRL_DENAB;
-	psycho_write(pbm->controller_regs + PSYCHO_IOMMU_CONTROL, control);
-	for(i = 0; i < 16; i++) {
-		psycho_write(pbm->controller_regs + PSYCHO_IOMMU_TAG + (i * 8UL), 0);
-		psycho_write(pbm->controller_regs + PSYCHO_IOMMU_DATA + (i * 8UL), 0);
-	}
-
-	/* Leave diag mode enabled for full-flushing done
-	 * in pci_iommu.c
-	 */
-	err = iommu_table_init(iommu, IO_TSB_SIZE, 0xc0000000, 0xffffffff,
-			       pbm->numa_node);
-	if (err)
-		return err;
-
-	psycho_write(pbm->controller_regs + PSYCHO_IOMMU_TSBBASE,
-		     __pa(iommu->page_table));
-
-	control = psycho_read(pbm->controller_regs + PSYCHO_IOMMU_CONTROL);
-	control &= ~(PSYCHO_IOMMU_CTRL_TSBSZ | PSYCHO_IOMMU_CTRL_TBWSZ);
-	control |= (PSYCHO_IOMMU_TSBSZ_128K | PSYCHO_IOMMU_CTRL_ENAB);
-	psycho_write(pbm->controller_regs + PSYCHO_IOMMU_CONTROL, control);
-
-	/* If necessary, hook us up for starfire IRQ translations. */
-	if (this_is_starfire)
-		starfire_hookup(pbm->portid);
-
-	return 0;
-}
-
 #define PSYCHO_IRQ_RETRY	0x1a00UL
 #define PSYCHO_PCIA_DIAG	0x2020UL
 #define PSYCHO_PCIB_DIAG	0x4020UL
@@ -886,28 +397,28 @@ static void psycho_controller_hwinit(struct pci_pbm_info *pbm)
 {
 	u64 tmp;
 
-	psycho_write(pbm->controller_regs + PSYCHO_IRQ_RETRY, 5);
+	upa_writeq(5, pbm->controller_regs + PSYCHO_IRQ_RETRY);
 
 	/* Enable arbiter for all PCI slots. */
-	tmp = psycho_read(pbm->controller_regs + PSYCHO_PCIA_CTRL);
+	tmp = upa_readq(pbm->controller_regs + PSYCHO_PCIA_CTRL);
 	tmp |= PSYCHO_PCICTRL_AEN;
-	psycho_write(pbm->controller_regs + PSYCHO_PCIA_CTRL, tmp);
+	upa_writeq(tmp, pbm->controller_regs + PSYCHO_PCIA_CTRL);
 
-	tmp = psycho_read(pbm->controller_regs + PSYCHO_PCIB_CTRL);
+	tmp = upa_readq(pbm->controller_regs + PSYCHO_PCIB_CTRL);
 	tmp |= PSYCHO_PCICTRL_AEN;
-	psycho_write(pbm->controller_regs + PSYCHO_PCIB_CTRL, tmp);
+	upa_writeq(tmp, pbm->controller_regs + PSYCHO_PCIB_CTRL);
 
 	/* Disable DMA write / PIO read synchronization on
 	 * both PCI bus segments.
 	 * [ U2P Erratum 1243770, STP2223BGA data sheet ]
 	 */
-	tmp = psycho_read(pbm->controller_regs + PSYCHO_PCIA_DIAG);
+	tmp = upa_readq(pbm->controller_regs + PSYCHO_PCIA_DIAG);
 	tmp |= PSYCHO_PCIDIAG_DDWSYNC;
-	psycho_write(pbm->controller_regs + PSYCHO_PCIA_DIAG, tmp);
+	upa_writeq(tmp, pbm->controller_regs + PSYCHO_PCIA_DIAG);
 
-	tmp = psycho_read(pbm->controller_regs + PSYCHO_PCIB_DIAG);
+	tmp = upa_readq(pbm->controller_regs + PSYCHO_PCIB_DIAG);
 	tmp |= PSYCHO_PCIDIAG_DDWSYNC;
-	psycho_write(pbm->controller_regs + PSYCHO_PCIB_DIAG, tmp);
+	upa_writeq(tmp, pbm->controller_regs + PSYCHO_PCIB_DIAG);
 }
 
 static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm,
@@ -920,10 +431,16 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm,
 		pbm->stc.strbuf_control  = base + PSYCHO_STRBUF_CONTROL_A;
 		pbm->stc.strbuf_pflush   = base + PSYCHO_STRBUF_FLUSH_A;
 		pbm->stc.strbuf_fsync    = base + PSYCHO_STRBUF_FSYNC_A;
+		pbm->stc.strbuf_err_stat = base + PSYCHO_STC_ERR_A;
+		pbm->stc.strbuf_tag_diag = base + PSYCHO_STC_TAG_A;
+		pbm->stc.strbuf_line_diag= base + PSYCHO_STC_LINE_A;
 	} else {
 		pbm->stc.strbuf_control  = base + PSYCHO_STRBUF_CONTROL_B;
 		pbm->stc.strbuf_pflush   = base + PSYCHO_STRBUF_FLUSH_B;
 		pbm->stc.strbuf_fsync    = base + PSYCHO_STRBUF_FSYNC_B;
+		pbm->stc.strbuf_err_stat = base + PSYCHO_STC_ERR_B;
+		pbm->stc.strbuf_tag_diag = base + PSYCHO_STC_TAG_B;
+		pbm->stc.strbuf_line_diag= base + PSYCHO_STC_LINE_B;
 	}
 	/* PSYCHO's streaming buffer lacks ctx flushing. */
 	pbm->stc.strbuf_ctxflush      = 0;
@@ -946,7 +463,7 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm,
 	 */
 #undef PSYCHO_STRBUF_RERUN_ENABLE
 #undef PSYCHO_STRBUF_RERUN_DISABLE
-	control = psycho_read(pbm->stc.strbuf_control);
+	control = upa_readq(pbm->stc.strbuf_control);
 	control |= PSYCHO_STRBUF_CTRL_ENAB;
 	control &= ~(PSYCHO_STRBUF_CTRL_LENAB | PSYCHO_STRBUF_CTRL_LPTR);
 #ifdef PSYCHO_STRBUF_RERUN_ENABLE
@@ -956,7 +473,7 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm,
 	control |= PSYCHO_STRBUF_CTRL_RRDIS;
 #endif
 #endif
-	psycho_write(pbm->stc.strbuf_control, control);
+	upa_writeq(control, pbm->stc.strbuf_control);
 
 	pbm->stc.strbuf_enabled = 1;
 }
@@ -968,111 +485,134 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm,
 #define PSYCHO_MEMSPACE_B	0x180000000UL
 #define PSYCHO_MEMSPACE_SIZE	0x07fffffffUL
 
-static void __init psycho_pbm_init(struct pci_controller_info *p,
-			    struct device_node *dp, int is_pbm_a)
+static void __init psycho_pbm_init(struct pci_pbm_info *pbm,
+				   struct of_device *op, int is_pbm_a)
 {
-	struct property *prop;
-	struct pci_pbm_info *pbm;
-
-	if (is_pbm_a)
-		pbm = &p->pbm_A;
-	else
-		pbm = &p->pbm_B;
-
-	pbm->next = pci_pbm_root;
-	pci_pbm_root = pbm;
-
-	pbm->numa_node = -1;
-
-	pbm->scan_bus = psycho_scan_bus;
-	pbm->pci_ops = &sun4u_pci_ops;
-	pbm->config_space_reg_bits = 8;
-
-	pbm->index = pci_num_pbms++;
-
-	pbm->chip_type = PBM_CHIP_TYPE_PSYCHO;
-	pbm->chip_version = 0;
-	prop = of_find_property(dp, "version#", NULL);
-	if (prop)
-		pbm->chip_version = *(int *) prop->value;
-	pbm->chip_revision = 0;
-	prop = of_find_property(dp, "module-revision#", NULL);
-	if (prop)
-		pbm->chip_revision = *(int *) prop->value;
-
-	pbm->parent = p;
-	pbm->prom_node = dp;
-	pbm->name = dp->full_name;
-
-	printk("%s: PSYCHO PCI Bus Module ver[%x:%x]\n",
-	       pbm->name,
-	       pbm->chip_version, pbm->chip_revision);
-
-	pci_determine_mem_io_space(pbm);
+	psycho_pbm_init_common(pbm, op, "PSYCHO", PBM_CHIP_TYPE_PSYCHO);
+	psycho_pbm_strbuf_init(pbm, is_pbm_a);
+	psycho_scan_bus(pbm, &op->dev);
+}
 
-	pci_get_pbm_props(pbm);
+static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid)
+{
+	struct pci_pbm_info *pbm;
 
-	psycho_pbm_strbuf_init(pbm, is_pbm_a);
+	for (pbm = pci_pbm_root; pbm; pbm = pbm->next) {
+		if (pbm->portid == upa_portid)
+			return pbm;
+	}
+	return NULL;
 }
 
 #define PSYCHO_CONFIGSPACE	0x001000000UL
 
-void __init psycho_init(struct device_node *dp, char *model_name)
+static int __devinit psycho_probe(struct of_device *op,
+				  const struct of_device_id *match)
 {
-	struct linux_prom64_registers *pr_regs;
-	struct pci_controller_info *p;
+	const struct linux_prom64_registers *pr_regs;
+	struct device_node *dp = op->node;
 	struct pci_pbm_info *pbm;
 	struct iommu *iommu;
-	struct property *prop;
+	int is_pbm_a, err;
 	u32 upa_portid;
-	int is_pbm_a;
 
-	upa_portid = 0xff;
-	prop = of_find_property(dp, "upa-portid", NULL);
-	if (prop)
-		upa_portid = *(u32 *) prop->value;
+	upa_portid = of_getintprop_default(dp, "upa-portid", 0xff);
 
-	for (pbm = pci_pbm_root; pbm; pbm = pbm->next) {
-		struct pci_controller_info *p = pbm->parent;
+	err = -ENOMEM;
+	pbm = kzalloc(sizeof(*pbm), GFP_KERNEL);
+	if (!pbm) {
+		printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n");
+		goto out_err;
+	}
 
-		if (p->pbm_A.portid == upa_portid) {
-			is_pbm_a = (p->pbm_A.prom_node == NULL);
-			psycho_pbm_init(p, dp, is_pbm_a);
-			return;
+	pbm->sibling = psycho_find_sibling(upa_portid);
+	if (pbm->sibling) {
+		iommu = pbm->sibling->iommu;
+	} else {
+		iommu = kzalloc(sizeof(struct iommu), GFP_KERNEL);
+		if (!iommu) {
+			printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n");
+			goto out_free_controller;
 		}
 	}
 
-	p = kzalloc(sizeof(struct pci_controller_info), GFP_ATOMIC);
-	if (!p)
-		goto fatal_memory_error;
-	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
-	if (!iommu)
-		goto fatal_memory_error;
+	pbm->iommu = iommu;
+	pbm->portid = upa_portid;
 
-	p->pbm_A.iommu = p->pbm_B.iommu = iommu;
+	pr_regs = of_get_property(dp, "reg", NULL);
+	err = -ENODEV;
+	if (!pr_regs) {
+		printk(KERN_ERR PFX "No reg property.\n");
+		goto out_free_iommu;
+	}
 
-	p->pbm_A.portid = upa_portid;
-	p->pbm_B.portid = upa_portid;
+	is_pbm_a = ((pr_regs[0].phys_addr & 0x6000) == 0x2000);
 
-	prop = of_find_property(dp, "reg", NULL);
-	pr_regs = prop->value;
+	pbm->controller_regs = pr_regs[2].phys_addr;
+	pbm->config_space = (pr_regs[2].phys_addr + PSYCHO_CONFIGSPACE);
 
-	p->pbm_A.controller_regs = pr_regs[2].phys_addr;
-	p->pbm_B.controller_regs = pr_regs[2].phys_addr;
+	if (is_pbm_a) {
+		pbm->pci_afsr = pbm->controller_regs + PSYCHO_PCI_AFSR_A;
+		pbm->pci_afar = pbm->controller_regs + PSYCHO_PCI_AFAR_A;
+		pbm->pci_csr  = pbm->controller_regs + PSYCHO_PCIA_CTRL;
+	} else {
+		pbm->pci_afsr = pbm->controller_regs + PSYCHO_PCI_AFSR_B;
+		pbm->pci_afar = pbm->controller_regs + PSYCHO_PCI_AFAR_B;
+		pbm->pci_csr  = pbm->controller_regs + PSYCHO_PCIB_CTRL;
+	}
 
-	p->pbm_A.config_space = p->pbm_B.config_space =
-		(pr_regs[2].phys_addr + PSYCHO_CONFIGSPACE);
+	psycho_controller_hwinit(pbm);
+	if (!pbm->sibling) {
+		err = psycho_iommu_init(pbm, 128, 0xc0000000,
+					0xffffffff, PSYCHO_CONTROL);
+		if (err)
+			goto out_free_iommu;
 
-	psycho_controller_hwinit(&p->pbm_A);
+		/* If necessary, hook us up for starfire IRQ translations. */
+		if (this_is_starfire)
+			starfire_hookup(pbm->portid);
+	}
 
-	if (psycho_iommu_init(&p->pbm_A))
-		goto fatal_memory_error;
+	psycho_pbm_init(pbm, op, is_pbm_a);
 
-	is_pbm_a = ((pr_regs[0].phys_addr & 0x6000) == 0x2000);
-	psycho_pbm_init(p, dp, is_pbm_a);
-	return;
+	pbm->next = pci_pbm_root;
+	pci_pbm_root = pbm;
+
+	if (pbm->sibling)
+		pbm->sibling->sibling = pbm;
+
+	dev_set_drvdata(&op->dev, pbm);
+
+	return 0;
+
+out_free_iommu:
+	if (!pbm->sibling)
+		kfree(pbm->iommu);
 
-fatal_memory_error:
-	prom_printf("PSYCHO: Fatal memory allocation error.\n");
-	prom_halt();
+out_free_controller:
+	kfree(pbm);
+
+out_err:
+	return err;
 }
+
+static struct of_device_id __initdata psycho_match[] = {
+	{
+		.name = "pci",
+		.compatible = "pci108e,8000",
+	},
+	{},
+};
+
+static struct of_platform_driver psycho_driver = {
+	.name		= DRIVER_NAME,
+	.match_table	= psycho_match,
+	.probe		= psycho_probe,
+};
+
+static int __init psycho_init(void)
+{
+	return of_register_driver(&psycho_driver, &of_bus_type);
+}
+
+subsys_initcall(psycho_init);
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index ade5184..713257b 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -16,31 +16,15 @@
 #include <asm/apb.h>
 #include <asm/iommu.h>
 #include <asm/irq.h>
-#include <asm/smp.h>
-#include <asm/oplib.h>
 #include <asm/prom.h>
+#include <asm/upa.h>
 
 #include "pci_impl.h"
 #include "iommu_common.h"
+#include "psycho_common.h"
 
-/* All SABRE registers are 64-bits.  The following accessor
- * routines are how they are accessed.  The REG parameter
- * is a physical address.
- */
-#define sabre_read(__reg) \
-({	u64 __ret; \
-	__asm__ __volatile__("ldxa [%1] %2, %0" \
-			     : "=r" (__ret) \
-			     : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
-			     : "memory"); \
-	__ret; \
-})
-#define sabre_write(__reg, __val) \
-	__asm__ __volatile__("stxa %0, [%1] %2" \
-			     : /* no outputs */ \
-			     : "r" (__val), "r" (__reg), \
-			       "i" (ASI_PHYS_BYPASS_EC_E) \
-			     : "memory")
+#define DRIVER_NAME	"sabre"
+#define PFX		DRIVER_NAME ": "
 
 /* SABRE PCI controller register offsets and definitions. */
 #define SABRE_UE_AFSR		0x0030UL
@@ -208,95 +192,6 @@
 static int hummingbird_p;
 static struct pci_bus *sabre_root_bus;
 
-/* SABRE error handling support. */
-static void sabre_check_iommu_error(struct pci_pbm_info *pbm,
-				    unsigned long afsr,
-				    unsigned long afar)
-{
-	struct iommu *iommu = pbm->iommu;
-	unsigned long iommu_tag[16];
-	unsigned long iommu_data[16];
-	unsigned long flags;
-	u64 control;
-	int i;
-
-	spin_lock_irqsave(&iommu->lock, flags);
-	control = sabre_read(iommu->iommu_control);
-	if (control & SABRE_IOMMUCTRL_ERR) {
-		char *type_string;
-
-		/* Clear the error encountered bit.
-		 * NOTE: On Sabre this is write 1 to clear,
-		 *       which is different from Psycho.
-		 */
-		sabre_write(iommu->iommu_control, control);
-		switch((control & SABRE_IOMMUCTRL_ERRSTS) >> 25UL) {
-		case 1:
-			type_string = "Invalid Error";
-			break;
-		case 3:
-			type_string = "ECC Error";
-			break;
-		default:
-			type_string = "Unknown";
-			break;
-		};
-		printk("%s: IOMMU Error, type[%s]\n",
-		       pbm->name, type_string);
-
-		/* Enter diagnostic mode and probe for error'd
-		 * entries in the IOTLB.
-		 */
-		control &= ~(SABRE_IOMMUCTRL_ERRSTS | SABRE_IOMMUCTRL_ERR);
-		sabre_write(iommu->iommu_control,
-			    (control | SABRE_IOMMUCTRL_DENAB));
-		for (i = 0; i < 16; i++) {
-			unsigned long base = pbm->controller_regs;
-
-			iommu_tag[i] =
-				sabre_read(base + SABRE_IOMMU_TAG + (i * 8UL));
-			iommu_data[i] =
-				sabre_read(base + SABRE_IOMMU_DATA + (i * 8UL));
-			sabre_write(base + SABRE_IOMMU_TAG + (i * 8UL), 0);
-			sabre_write(base + SABRE_IOMMU_DATA + (i * 8UL), 0);
-		}
-		sabre_write(iommu->iommu_control, control);
-
-		for (i = 0; i < 16; i++) {
-			unsigned long tag, data;
-
-			tag = iommu_tag[i];
-			if (!(tag & SABRE_IOMMUTAG_ERR))
-				continue;
-
-			data = iommu_data[i];
-			switch((tag & SABRE_IOMMUTAG_ERRSTS) >> 23UL) {
-			case 1:
-				type_string = "Invalid Error";
-				break;
-			case 3:
-				type_string = "ECC Error";
-				break;
-			default:
-				type_string = "Unknown";
-				break;
-			};
-			printk("%s: IOMMU TAG(%d)[RAW(%016lx)error(%s)wr(%d)sz(%dK)vpg(%08lx)]\n",
-			       pbm->name, i, tag, type_string,
-			       ((tag & SABRE_IOMMUTAG_WRITE) ? 1 : 0),
-			       ((tag & SABRE_IOMMUTAG_SIZE) ? 64 : 8),
-			       ((tag & SABRE_IOMMUTAG_VPN) << IOMMU_PAGE_SHIFT));
-			printk("%s: IOMMU DATA(%d)[RAW(%016lx)valid(%d)used(%d)cache(%d)ppg(%016lx)\n",
-			       pbm->name, i, data,
-			       ((data & SABRE_IOMMUDATA_VALID) ? 1 : 0),
-			       ((data & SABRE_IOMMUDATA_USED) ? 1 : 0),
-			       ((data & SABRE_IOMMUDATA_CACHE) ? 1 : 0),
-			       ((data & SABRE_IOMMUDATA_PPN) << IOMMU_PAGE_SHIFT));
-		}
-	}
-	spin_unlock_irqrestore(&iommu->lock, flags);
-}
-
 static irqreturn_t sabre_ue_intr(int irq, void *dev_id)
 {
 	struct pci_pbm_info *pbm = dev_id;
@@ -306,8 +201,8 @@ static irqreturn_t sabre_ue_intr(int irq, void *dev_id)
 	int reported;
 
 	/* Latch uncorrectable error status. */
-	afar = sabre_read(afar_reg);
-	afsr = sabre_read(afsr_reg);
+	afar = upa_readq(afar_reg);
+	afsr = upa_readq(afsr_reg);
 
 	/* Clear the primary/secondary error status bits. */
 	error_bits = afsr &
@@ -316,7 +211,7 @@ static irqreturn_t sabre_ue_intr(int irq, void *dev_id)
 		 SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE);
 	if (!error_bits)
 		return IRQ_NONE;
-	sabre_write(afsr_reg, error_bits);
+	upa_writeq(error_bits, afsr_reg);
 
 	/* Log the error. */
 	printk("%s: Uncorrectable Error, primary error type[%s%s]\n",
@@ -352,7 +247,7 @@ static irqreturn_t sabre_ue_intr(int irq, void *dev_id)
 	printk("]\n");
 
 	/* Interrogate IOMMU for error status. */
-	sabre_check_iommu_error(pbm, afsr, afar);
+	psycho_check_iommu_error(pbm, afsr, afar, UE_ERR);
 
 	return IRQ_HANDLED;
 }
@@ -366,8 +261,8 @@ static irqreturn_t sabre_ce_intr(int irq, void *dev_id)
 	int reported;
 
 	/* Latch error status. */
-	afar = sabre_read(afar_reg);
-	afsr = sabre_read(afsr_reg);
+	afar = upa_readq(afar_reg);
+	afsr = upa_readq(afsr_reg);
 
 	/* Clear primary/secondary error status bits. */
 	error_bits = afsr &
@@ -375,7 +270,7 @@ static irqreturn_t sabre_ce_intr(int irq, void *dev_id)
 		 SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR);
 	if (!error_bits)
 		return IRQ_NONE;
-	sabre_write(afsr_reg, error_bits);
+	upa_writeq(error_bits, afsr_reg);
 
 	/* Log the error. */
 	printk("%s: Correctable Error, primary error type[%s]\n",
@@ -413,136 +308,9 @@ static irqreturn_t sabre_ce_intr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t sabre_pcierr_intr_other(struct pci_pbm_info *pbm)
-{
-	unsigned long csr_reg, csr, csr_error_bits;
-	irqreturn_t ret = IRQ_NONE;
-	u16 stat;
-
-	csr_reg = pbm->controller_regs + SABRE_PCICTRL;
-	csr = sabre_read(csr_reg);
-	csr_error_bits =
-		csr & SABRE_PCICTRL_SERR;
-	if (csr_error_bits) {
-		/* Clear the errors.  */
-		sabre_write(csr_reg, csr);
-
-		/* Log 'em.  */
-		if (csr_error_bits & SABRE_PCICTRL_SERR)
-			printk("%s: PCI SERR signal asserted.\n",
-			       pbm->name);
-		ret = IRQ_HANDLED;
-	}
-	pci_bus_read_config_word(sabre_root_bus, 0,
-				 PCI_STATUS, &stat);
-	if (stat & (PCI_STATUS_PARITY |
-		    PCI_STATUS_SIG_TARGET_ABORT |
-		    PCI_STATUS_REC_TARGET_ABORT |
-		    PCI_STATUS_REC_MASTER_ABORT |
-		    PCI_STATUS_SIG_SYSTEM_ERROR)) {
-		printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
-		       pbm->name, stat);
-		pci_bus_write_config_word(sabre_root_bus, 0,
-					  PCI_STATUS, 0xffff);
-		ret = IRQ_HANDLED;
-	}
-	return ret;
-}
-
-static irqreturn_t sabre_pcierr_intr(int irq, void *dev_id)
-{
-	struct pci_pbm_info *pbm = dev_id;
-	unsigned long afsr_reg, afar_reg;
-	unsigned long afsr, afar, error_bits;
-	int reported;
-
-	afsr_reg = pbm->controller_regs + SABRE_PIOAFSR;
-	afar_reg = pbm->controller_regs + SABRE_PIOAFAR;
-
-	/* Latch error status. */
-	afar = sabre_read(afar_reg);
-	afsr = sabre_read(afsr_reg);
-
-	/* Clear primary/secondary error status bits. */
-	error_bits = afsr &
-		(SABRE_PIOAFSR_PMA | SABRE_PIOAFSR_PTA |
-		 SABRE_PIOAFSR_PRTRY | SABRE_PIOAFSR_PPERR |
-		 SABRE_PIOAFSR_SMA | SABRE_PIOAFSR_STA |
-		 SABRE_PIOAFSR_SRTRY | SABRE_PIOAFSR_SPERR);
-	if (!error_bits)
-		return sabre_pcierr_intr_other(pbm);
-	sabre_write(afsr_reg, error_bits);
-
-	/* Log the error. */
-	printk("%s: PCI Error, primary error type[%s]\n",
-	       pbm->name,
-	       (((error_bits & SABRE_PIOAFSR_PMA) ?
-		 "Master Abort" :
-		 ((error_bits & SABRE_PIOAFSR_PTA) ?
-		  "Target Abort" :
-		  ((error_bits & SABRE_PIOAFSR_PRTRY) ?
-		   "Excessive Retries" :
-		   ((error_bits & SABRE_PIOAFSR_PPERR) ?
-		    "Parity Error" : "???"))))));
-	printk("%s: bytemask[%04lx] was_block(%d)\n",
-	       pbm->name,
-	       (afsr & SABRE_PIOAFSR_BMSK) >> 32UL,
-	       (afsr & SABRE_PIOAFSR_BLK) ? 1 : 0);
-	printk("%s: PCI AFAR [%016lx]\n", pbm->name, afar);
-	printk("%s: PCI Secondary errors [", pbm->name);
-	reported = 0;
-	if (afsr & SABRE_PIOAFSR_SMA) {
-		reported++;
-		printk("(Master Abort)");
-	}
-	if (afsr & SABRE_PIOAFSR_STA) {
-		reported++;
-		printk("(Target Abort)");
-	}
-	if (afsr & SABRE_PIOAFSR_SRTRY) {
-		reported++;
-		printk("(Excessive Retries)");
-	}
-	if (afsr & SABRE_PIOAFSR_SPERR) {
-		reported++;
-		printk("(Parity Error)");
-	}
-	if (!reported)
-		printk("(none)");
-	printk("]\n");
-
-	/* For the error types shown, scan both PCI buses for devices
-	 * which have logged that error type.
-	 */
-
-	/* If we see a Target Abort, this could be the result of an
-	 * IOMMU translation error of some sort.  It is extremely
-	 * useful to log this information as usually it indicates
-	 * a bug in the IOMMU support code or a PCI device driver.
-	 */
-	if (error_bits & (SABRE_PIOAFSR_PTA | SABRE_PIOAFSR_STA)) {
-		sabre_check_iommu_error(pbm, afsr, afar);
-		pci_scan_for_target_abort(pbm, pbm->pci_bus);
-	}
-	if (error_bits & (SABRE_PIOAFSR_PMA | SABRE_PIOAFSR_SMA))
-		pci_scan_for_master_abort(pbm, pbm->pci_bus);
-
-	/* For excessive retries, SABRE/PBM will abort the device
-	 * and there is no way to specifically check for excessive
-	 * retries in the config space status registers.  So what
-	 * we hope is that we'll catch it via the master/target
-	 * abort events.
-	 */
-
-	if (error_bits & (SABRE_PIOAFSR_PPERR | SABRE_PIOAFSR_SPERR))
-		pci_scan_for_parity_error(pbm, pbm->pci_bus);
-
-	return IRQ_HANDLED;
-}
-
 static void sabre_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct device_node *dp = pbm->prom_node;
+	struct device_node *dp = pbm->op->node;
 	struct of_device *op;
 	unsigned long base = pbm->controller_regs;
 	u64 tmp;
@@ -568,33 +336,34 @@ static void sabre_register_error_handlers(struct pci_pbm_info *pbm)
 	 * registering the handler so that we don't get spurious
 	 * interrupts.
 	 */
-	sabre_write(base + SABRE_UE_AFSR,
-		    (SABRE_UEAFSR_PDRD | SABRE_UEAFSR_PDWR |
-		     SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR |
-		     SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE));
+	upa_writeq((SABRE_UEAFSR_PDRD | SABRE_UEAFSR_PDWR |
+		    SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR |
+		    SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE),
+		   base + SABRE_UE_AFSR);
 
 	err = request_irq(op->irqs[1], sabre_ue_intr, 0, "SABRE_UE", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Couldn't register UE, err=%d.\n",
 		       pbm->name, err);
 
-	sabre_write(base + SABRE_CE_AFSR,
-		    (SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR |
-		     SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR));
+	upa_writeq((SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR |
+		    SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR),
+		   base + SABRE_CE_AFSR);
+
 
 	err = request_irq(op->irqs[2], sabre_ce_intr, 0, "SABRE_CE", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Couldn't register CE, err=%d.\n",
 		       pbm->name, err);
-	err = request_irq(op->irqs[0], sabre_pcierr_intr, 0,
+	err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
 			  "SABRE_PCIERR", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Couldn't register PCIERR, err=%d.\n",
 		       pbm->name, err);
 
-	tmp = sabre_read(base + SABRE_PCICTRL);
+	tmp = upa_readq(base + SABRE_PCICTRL);
 	tmp |= SABRE_PCICTRL_ERREN;
-	sabre_write(base + SABRE_PCICTRL, tmp);
+	upa_writeq(tmp, base + SABRE_PCICTRL);
 }
 
 static void apb_init(struct pci_bus *sabre_bus)
@@ -633,7 +402,8 @@ static void apb_init(struct pci_bus *sabre_bus)
 	}
 }
 
-static void __init sabre_scan_bus(struct pci_pbm_info *pbm)
+static void __init sabre_scan_bus(struct pci_pbm_info *pbm,
+				  struct device *parent)
 {
 	static int once;
 
@@ -656,12 +426,12 @@ static void __init sabre_scan_bus(struct pci_pbm_info *pbm)
 	 * to live at bus 0.
 	 */
 	if (once != 0) {
-		prom_printf("SABRE: Multiple controllers unsupported.\n");
-		prom_halt();
+		printk(KERN_ERR PFX "Multiple controllers unsupported.\n");
+		return;
 	}
 	once++;
 
-	pbm->pci_bus = pci_scan_one_pbm(pbm);
+	pbm->pci_bus = pci_scan_one_pbm(pbm, parent);
 	if (!pbm->pci_bus)
 		return;
 
@@ -672,133 +442,58 @@ static void __init sabre_scan_bus(struct pci_pbm_info *pbm)
 	sabre_register_error_handlers(pbm);
 }
 
-static int sabre_iommu_init(struct pci_pbm_info *pbm,
-			    int tsbsize, unsigned long dvma_offset,
-			    u32 dma_mask)
-{
-	struct iommu *iommu = pbm->iommu;
-	unsigned long i;
-	u64 control;
-	int err;
-
-	/* Register addresses. */
-	iommu->iommu_control  = pbm->controller_regs + SABRE_IOMMU_CONTROL;
-	iommu->iommu_tsbbase  = pbm->controller_regs + SABRE_IOMMU_TSBBASE;
-	iommu->iommu_flush    = pbm->controller_regs + SABRE_IOMMU_FLUSH;
-	iommu->iommu_tags     = iommu->iommu_flush + (0xa580UL - 0x0210UL);
-	iommu->write_complete_reg = pbm->controller_regs + SABRE_WRSYNC;
-	/* Sabre's IOMMU lacks ctx flushing. */
-	iommu->iommu_ctxflush = 0;
-                                        
-	/* Invalidate TLB Entries. */
-	control = sabre_read(pbm->controller_regs + SABRE_IOMMU_CONTROL);
-	control |= SABRE_IOMMUCTRL_DENAB;
-	sabre_write(pbm->controller_regs + SABRE_IOMMU_CONTROL, control);
-
-	for(i = 0; i < 16; i++) {
-		sabre_write(pbm->controller_regs + SABRE_IOMMU_TAG + (i * 8UL), 0);
-		sabre_write(pbm->controller_regs + SABRE_IOMMU_DATA + (i * 8UL), 0);
-	}
-
-	/* Leave diag mode enabled for full-flushing done
-	 * in pci_iommu.c
-	 */
-	err = iommu_table_init(iommu, tsbsize * 1024 * 8,
-			       dvma_offset, dma_mask, pbm->numa_node);
-	if (err)
-		return err;
-
-	sabre_write(pbm->controller_regs + SABRE_IOMMU_TSBBASE,
-		    __pa(iommu->page_table));
-
-	control = sabre_read(pbm->controller_regs + SABRE_IOMMU_CONTROL);
-	control &= ~(SABRE_IOMMUCTRL_TSBSZ | SABRE_IOMMUCTRL_TBWSZ);
-	control |= SABRE_IOMMUCTRL_ENAB;
-	switch(tsbsize) {
-	case 64:
-		control |= SABRE_IOMMU_TSBSZ_64K;
-		break;
-	case 128:
-		control |= SABRE_IOMMU_TSBSZ_128K;
-		break;
-	default:
-		prom_printf("iommu_init: Illegal TSB size %d\n", tsbsize);
-		prom_halt();
-		break;
-	}
-	sabre_write(pbm->controller_regs + SABRE_IOMMU_CONTROL, control);
-
-	return 0;
-}
-
-static void __init sabre_pbm_init(struct pci_controller_info *p,
-				  struct pci_pbm_info *pbm, struct device_node *dp)
+static void __init sabre_pbm_init(struct pci_pbm_info *pbm,
+				  struct of_device *op)
 {
-	pbm->name = dp->full_name;
-	printk("%s: SABRE PCI Bus Module\n", pbm->name);
-
-	pbm->numa_node = -1;
-
-	pbm->scan_bus = sabre_scan_bus;
-	pbm->pci_ops = &sun4u_pci_ops;
-	pbm->config_space_reg_bits = 8;
-
-	pbm->index = pci_num_pbms++;
-
-	pbm->chip_type = PBM_CHIP_TYPE_SABRE;
-	pbm->parent = p;
-	pbm->prom_node = dp;
-	pci_get_pbm_props(pbm);
-
-	pci_determine_mem_io_space(pbm);
+	psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE);
+	pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR;
+	pbm->pci_afar = pbm->controller_regs + SABRE_PIOAFAR;
+	pbm->pci_csr = pbm->controller_regs + SABRE_PCICTRL;
+	sabre_scan_bus(pbm, &op->dev);
 }
 
-void __init sabre_init(struct device_node *dp, char *model_name)
+static int __devinit sabre_probe(struct of_device *op,
+				 const struct of_device_id *match)
 {
 	const struct linux_prom64_registers *pr_regs;
-	struct pci_controller_info *p;
+	struct device_node *dp = op->node;
 	struct pci_pbm_info *pbm;
+	u32 upa_portid, dma_mask;
 	struct iommu *iommu;
-	int tsbsize;
+	int tsbsize, err;
 	const u32 *vdma;
-	u32 upa_portid, dma_mask;
 	u64 clear_irq;
 
-	hummingbird_p = 0;
-	if (!strcmp(model_name, "pci108e,a001"))
-		hummingbird_p = 1;
-	else if (!strcmp(model_name, "SUNW,sabre")) {
-		const char *compat = of_get_property(dp, "compatible", NULL);
-		if (compat && !strcmp(compat, "pci108e,a001"))
-			hummingbird_p = 1;
-		if (!hummingbird_p) {
-			struct device_node *dp;
-
-			/* Of course, Sun has to encode things a thousand
-			 * different ways, inconsistently.
-			 */
-			for_each_node_by_type(dp, "cpu") {
-				if (!strcmp(dp->name, "SUNW,UltraSPARC-IIe"))
-					hummingbird_p = 1;
-			}
+	hummingbird_p = (match->data != NULL);
+	if (!hummingbird_p) {
+		struct device_node *cpu_dp;
+
+		/* Of course, Sun has to encode things a thousand
+		 * different ways, inconsistently.
+		 */
+		for_each_node_by_type(cpu_dp, "cpu") {
+			if (!strcmp(cpu_dp->name, "SUNW,UltraSPARC-IIe"))
+				hummingbird_p = 1;
 		}
 	}
 
-	p = kzalloc(sizeof(*p), GFP_ATOMIC);
-	if (!p)
-		goto fatal_memory_error;
+	err = -ENOMEM;
+	pbm = kzalloc(sizeof(*pbm), GFP_KERNEL);
+	if (!pbm) {
+		printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n");
+		goto out_err;
+	}
+
+	iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
+	if (!iommu) {
+		printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n");
+		goto out_free_controller;
+	}
 
-	iommu = kzalloc(sizeof(*iommu), GFP_ATOMIC);
-	if (!iommu)
-		goto fatal_memory_error;
-	pbm = &p->pbm_A;
 	pbm->iommu = iommu;
 
 	upa_portid = of_getintprop_default(dp, "upa-portid", 0xff);
 
-	pbm->next = pci_pbm_root;
-	pci_pbm_root = pbm;
-
 	pbm->portid = upa_portid;
 
 	/*
@@ -806,6 +501,11 @@ void __init sabre_init(struct device_node *dp, char *model_name)
 	 */
 	
 	pr_regs = of_get_property(dp, "reg", NULL);
+	err = -ENODEV;
+	if (!pr_regs) {
+		printk(KERN_ERR PFX "No reg property\n");
+		goto out_free_iommu;
+	}
 
 	/*
 	 * First REG in property is base of entire SABRE register space.
@@ -816,22 +516,25 @@ void __init sabre_init(struct device_node *dp, char *model_name)
 
 	/* PCI first */
 	for (clear_irq = SABRE_ICLR_A_SLOT0; clear_irq < SABRE_ICLR_B_SLOT0 + 0x80; clear_irq += 8)
-		sabre_write(pbm->controller_regs + clear_irq, 0x0UL);
+		upa_writeq(0x0UL, pbm->controller_regs + clear_irq);
 
 	/* Then OBIO */
 	for (clear_irq = SABRE_ICLR_SCSI; clear_irq < SABRE_ICLR_SCSI + 0x80; clear_irq += 8)
-		sabre_write(pbm->controller_regs + clear_irq, 0x0UL);
+		upa_writeq(0x0UL, pbm->controller_regs + clear_irq);
 
 	/* Error interrupts are enabled later after the bus scan. */
-	sabre_write(pbm->controller_regs + SABRE_PCICTRL,
-		    (SABRE_PCICTRL_MRLEN   | SABRE_PCICTRL_SERR |
-		     SABRE_PCICTRL_ARBPARK | SABRE_PCICTRL_AEN));
+	upa_writeq((SABRE_PCICTRL_MRLEN   | SABRE_PCICTRL_SERR |
+		    SABRE_PCICTRL_ARBPARK | SABRE_PCICTRL_AEN),
+		   pbm->controller_regs + SABRE_PCICTRL);
 
 	/* Now map in PCI config space for entire SABRE. */
-	pbm->config_space =
-		(pbm->controller_regs + SABRE_CONFIGSPACE);
+	pbm->config_space = pbm->controller_regs + SABRE_CONFIGSPACE;
 
 	vdma = of_get_property(dp, "virtual-dma", NULL);
+	if (!vdma) {
+		printk(KERN_ERR PFX "No virtual-dma property\n");
+		goto out_free_iommu;
+	}
 
 	dma_mask = vdma[0];
 	switch(vdma[1]) {
@@ -849,20 +552,58 @@ void __init sabre_init(struct device_node *dp, char *model_name)
 			tsbsize = 128;
 			break;
 		default:
-			prom_printf("SABRE: strange virtual-dma size.\n");
-			prom_halt();
+			printk(KERN_ERR PFX "Strange virtual-dma size.\n");
+			goto out_free_iommu;
 	}
 
-	if (sabre_iommu_init(pbm, tsbsize, vdma[0], dma_mask))
-		goto fatal_memory_error;
+	err = psycho_iommu_init(pbm, tsbsize, vdma[0], dma_mask, SABRE_WRSYNC);
+	if (err)
+		goto out_free_iommu;
 
 	/*
 	 * Look for APB underneath.
 	 */
-	sabre_pbm_init(p, pbm, dp);
-	return;
+	sabre_pbm_init(pbm, op);
 
-fatal_memory_error:
-	prom_printf("SABRE: Fatal memory allocation error.\n");
-	prom_halt();
+	pbm->next = pci_pbm_root;
+	pci_pbm_root = pbm;
+
+	dev_set_drvdata(&op->dev, pbm);
+
+	return 0;
+
+out_free_iommu:
+	kfree(pbm->iommu);
+
+out_free_controller:
+	kfree(pbm);
+
+out_err:
+	return err;
+}
+
+static struct of_device_id __initdata sabre_match[] = {
+	{
+		.name = "pci",
+		.compatible = "pci108e,a001",
+		.data = (void *) 1,
+	},
+	{
+		.name = "pci",
+		.compatible = "pci108e,a000",
+	},
+	{},
+};
+
+static struct of_platform_driver sabre_driver = {
+	.name		= DRIVER_NAME,
+	.match_table	= sabre_match,
+	.probe		= sabre_probe,
+};
+
+static int __init sabre_init(void)
+{
+	return of_register_driver(&sabre_driver, &of_bus_type);
 }
+
+subsys_initcall(sabre_init);
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index 9248c67..45d9dba 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -1,6 +1,6 @@
 /* pci_schizo.c: SCHIZO/TOMATILLO specific PCI controller support.
  *
- * Copyright (C) 2001, 2002, 2003, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2001, 2002, 2003, 2007, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/kernel.h>
@@ -13,32 +13,15 @@
 
 #include <asm/iommu.h>
 #include <asm/irq.h>
-#include <asm/upa.h>
 #include <asm/pstate.h>
 #include <asm/prom.h>
-#include <asm/oplib.h>
+#include <asm/upa.h>
 
 #include "pci_impl.h"
 #include "iommu_common.h"
 
-/* All SCHIZO registers are 64-bits.  The following accessor
- * routines are how they are accessed.  The REG parameter
- * is a physical address.
- */
-#define schizo_read(__reg) \
-({	u64 __ret; \
-	__asm__ __volatile__("ldxa [%1] %2, %0" \
-			     : "=r" (__ret) \
-			     : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
-			     : "memory"); \
-	__ret; \
-})
-#define schizo_write(__reg, __val) \
-	__asm__ __volatile__("stxa %0, [%1] %2" \
-			     : /* no outputs */ \
-			     : "r" (__val), "r" (__reg), \
-			       "i" (ASI_PHYS_BYPASS_EC_E) \
-			     : "memory")
+#define DRIVER_NAME	"schizo"
+#define PFX		DRIVER_NAME ": "
 
 /* This is a convention that at least Excalibur and Merlin
  * follow.  I suppose the SCHIZO used in Starcat and friends
@@ -163,25 +146,25 @@ static void __schizo_check_stc_error_pbm(struct pci_pbm_info *pbm,
 	 * invalidating it before it has a chance to reach
 	 * main memory.
 	 */
-	control = schizo_read(strbuf->strbuf_control);
-	schizo_write(strbuf->strbuf_control,
-		     (control | SCHIZO_STRBUF_CTRL_DENAB));
+	control = upa_readq(strbuf->strbuf_control);
+	upa_writeq((control | SCHIZO_STRBUF_CTRL_DENAB),
+		   strbuf->strbuf_control);
 	for (i = 0; i < 128; i++) {
 		unsigned long val;
 
-		val = schizo_read(err_base + (i * 8UL));
-		schizo_write(err_base + (i * 8UL), 0UL);
+		val = upa_readq(err_base + (i * 8UL));
+		upa_writeq(0UL, err_base + (i * 8UL));
 		stc_error_buf[i] = val;
 	}
 	for (i = 0; i < 16; i++) {
-		stc_tag_buf[i] = schizo_read(tag_base + (i * 8UL));
-		stc_line_buf[i] = schizo_read(line_base + (i * 8UL));
-		schizo_write(tag_base + (i * 8UL), 0UL);
-		schizo_write(line_base + (i * 8UL), 0UL);
+		stc_tag_buf[i] = upa_readq(tag_base + (i * 8UL));
+		stc_line_buf[i] = upa_readq(line_base + (i * 8UL));
+		upa_writeq(0UL, tag_base + (i * 8UL));
+		upa_writeq(0UL, line_base + (i * 8UL));
 	}
 
 	/* OK, state is logged, exit diagnostic mode. */
-	schizo_write(strbuf->strbuf_control, control);
+	upa_writeq(control, strbuf->strbuf_control);
 
 	for (i = 0; i < 16; i++) {
 		int j, saw_error, first, last;
@@ -258,14 +241,14 @@ static void schizo_check_iommu_error_pbm(struct pci_pbm_info *pbm,
 	int i;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	control = schizo_read(iommu->iommu_control);
+	control = upa_readq(iommu->iommu_control);
 	if (control & SCHIZO_IOMMU_CTRL_XLTEERR) {
 		unsigned long base;
 		char *type_string;
 
 		/* Clear the error encountered bit. */
 		control &= ~SCHIZO_IOMMU_CTRL_XLTEERR;
-		schizo_write(iommu->iommu_control, control);
+		upa_writeq(control, iommu->iommu_control);
 
 		switch((control & SCHIZO_IOMMU_CTRL_XLTESTAT) >> 25UL) {
 		case 0:
@@ -295,24 +278,24 @@ static void schizo_check_iommu_error_pbm(struct pci_pbm_info *pbm,
 		 * get as much diagnostic information to the
 		 * console as we can.
 		 */
-		schizo_write(iommu->iommu_control,
-			     control | SCHIZO_IOMMU_CTRL_DENAB);
+		upa_writeq(control | SCHIZO_IOMMU_CTRL_DENAB,
+			   iommu->iommu_control);
 
 		base = pbm->pbm_regs;
 
 		for (i = 0; i < 16; i++) {
 			iommu_tag[i] =
-				schizo_read(base + SCHIZO_IOMMU_TAG + (i * 8UL));
+				upa_readq(base + SCHIZO_IOMMU_TAG + (i * 8UL));
 			iommu_data[i] =
-				schizo_read(base + SCHIZO_IOMMU_DATA + (i * 8UL));
+				upa_readq(base + SCHIZO_IOMMU_DATA + (i * 8UL));
 
 			/* Now clear out the entry. */
-			schizo_write(base + SCHIZO_IOMMU_TAG + (i * 8UL), 0);
-			schizo_write(base + SCHIZO_IOMMU_DATA + (i * 8UL), 0);
+			upa_writeq(0, base + SCHIZO_IOMMU_TAG + (i * 8UL));
+			upa_writeq(0, base + SCHIZO_IOMMU_DATA + (i * 8UL));
 		}
 
 		/* Leave diagnostic mode. */
-		schizo_write(iommu->iommu_control, control);
+		upa_writeq(control, iommu->iommu_control);
 
 		for (i = 0; i < 16; i++) {
 			unsigned long tag, data;
@@ -357,11 +340,12 @@ static void schizo_check_iommu_error_pbm(struct pci_pbm_info *pbm,
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-static void schizo_check_iommu_error(struct pci_controller_info *p,
+static void schizo_check_iommu_error(struct pci_pbm_info *pbm,
 				     enum schizo_error_type type)
 {
-	schizo_check_iommu_error_pbm(&p->pbm_A, type);
-	schizo_check_iommu_error_pbm(&p->pbm_B, type);
+	schizo_check_iommu_error_pbm(pbm, type);
+	if (pbm->sibling)
+		schizo_check_iommu_error_pbm(pbm->sibling, type);
 }
 
 /* Uncorrectable ECC error status gathering. */
@@ -386,14 +370,13 @@ static void schizo_check_iommu_error(struct pci_controller_info *p,
 static irqreturn_t schizo_ue_intr(int irq, void *dev_id)
 {
 	struct pci_pbm_info *pbm = dev_id;
-	struct pci_controller_info *p = pbm->parent;
 	unsigned long afsr_reg = pbm->controller_regs + SCHIZO_UE_AFSR;
 	unsigned long afar_reg = pbm->controller_regs + SCHIZO_UE_AFAR;
 	unsigned long afsr, afar, error_bits;
 	int reported, limit;
 
 	/* Latch uncorrectable error status. */
-	afar = schizo_read(afar_reg);
+	afar = upa_readq(afar_reg);
 
 	/* If either of the error pending bits are set in the
 	 * AFSR, the error status is being actively updated by
@@ -401,7 +384,7 @@ static irqreturn_t schizo_ue_intr(int irq, void *dev_id)
 	 */
 	limit = 1000;
 	do {
-		afsr = schizo_read(afsr_reg);
+		afsr = upa_readq(afsr_reg);
 	} while ((afsr & SCHIZO_UEAFSR_ERRPNDG) != 0 && --limit);
 
 	/* Clear the primary/secondary error status bits. */
@@ -410,7 +393,7 @@ static irqreturn_t schizo_ue_intr(int irq, void *dev_id)
 		 SCHIZO_UEAFSR_SPIO | SCHIZO_UEAFSR_SDMA);
 	if (!error_bits)
 		return IRQ_NONE;
-	schizo_write(afsr_reg, error_bits);
+	upa_writeq(error_bits, afsr_reg);
 
 	/* Log the error. */
 	printk("%s: Uncorrectable Error, primary error type[%s]\n",
@@ -449,7 +432,7 @@ static irqreturn_t schizo_ue_intr(int irq, void *dev_id)
 	printk("]\n");
 
 	/* Interrogate IOMMU for error status. */
-	schizo_check_iommu_error(p, UE_ERR);
+	schizo_check_iommu_error(pbm, UE_ERR);
 
 	return IRQ_HANDLED;
 }
@@ -481,7 +464,7 @@ static irqreturn_t schizo_ce_intr(int irq, void *dev_id)
 	int reported, limit;
 
 	/* Latch error status. */
-	afar = schizo_read(afar_reg);
+	afar = upa_readq(afar_reg);
 
 	/* If either of the error pending bits are set in the
 	 * AFSR, the error status is being actively updated by
@@ -489,7 +472,7 @@ static irqreturn_t schizo_ce_intr(int irq, void *dev_id)
 	 */
 	limit = 1000;
 	do {
-		afsr = schizo_read(afsr_reg);
+		afsr = upa_readq(afsr_reg);
 	} while ((afsr & SCHIZO_UEAFSR_ERRPNDG) != 0 && --limit);
 
 	/* Clear primary/secondary error status bits. */
@@ -498,7 +481,7 @@ static irqreturn_t schizo_ce_intr(int irq, void *dev_id)
 		 SCHIZO_CEAFSR_SPIO | SCHIZO_CEAFSR_SDMA);
 	if (!error_bits)
 		return IRQ_NONE;
-	schizo_write(afsr_reg, error_bits);
+	upa_writeq(error_bits, afsr_reg);
 
 	/* Log the error. */
 	printk("%s: Correctable Error, primary error type[%s]\n",
@@ -600,7 +583,7 @@ static irqreturn_t schizo_pcierr_intr_other(struct pci_pbm_info *pbm)
 	u16 stat;
 
 	csr_reg = pbm->pbm_regs + SCHIZO_PCI_CTRL;
-	csr = schizo_read(csr_reg);
+	csr = upa_readq(csr_reg);
 	csr_error_bits =
 		csr & (SCHIZO_PCICTRL_BUS_UNUS |
 		       SCHIZO_PCICTRL_TTO_ERR |
@@ -610,7 +593,7 @@ static irqreturn_t schizo_pcierr_intr_other(struct pci_pbm_info *pbm)
 		       SCHIZO_PCICTRL_SERR);
 	if (csr_error_bits) {
 		/* Clear the errors.  */
-		schizo_write(csr_reg, csr);
+		upa_writeq(csr, csr_reg);
 
 		/* Log 'em.  */
 		if (csr_error_bits & SCHIZO_PCICTRL_BUS_UNUS)
@@ -650,7 +633,6 @@ static irqreturn_t schizo_pcierr_intr_other(struct pci_pbm_info *pbm)
 static irqreturn_t schizo_pcierr_intr(int irq, void *dev_id)
 {
 	struct pci_pbm_info *pbm = dev_id;
-	struct pci_controller_info *p = pbm->parent;
 	unsigned long afsr_reg, afar_reg, base;
 	unsigned long afsr, afar, error_bits;
 	int reported;
@@ -661,8 +643,8 @@ static irqreturn_t schizo_pcierr_intr(int irq, void *dev_id)
 	afar_reg = base + SCHIZO_PCI_AFAR;
 
 	/* Latch error status. */
-	afar = schizo_read(afar_reg);
-	afsr = schizo_read(afsr_reg);
+	afar = upa_readq(afar_reg);
+	afsr = upa_readq(afsr_reg);
 
 	/* Clear primary/secondary error status bits. */
 	error_bits = afsr &
@@ -674,7 +656,7 @@ static irqreturn_t schizo_pcierr_intr(int irq, void *dev_id)
 		 SCHIZO_PCIAFSR_STTO | SCHIZO_PCIAFSR_SUNUS);
 	if (!error_bits)
 		return schizo_pcierr_intr_other(pbm);
-	schizo_write(afsr_reg, error_bits);
+	upa_writeq(error_bits, afsr_reg);
 
 	/* Log the error. */
 	printk("%s: PCI Error, primary error type[%s]\n",
@@ -744,7 +726,7 @@ static irqreturn_t schizo_pcierr_intr(int irq, void *dev_id)
 	 * a bug in the IOMMU support code or a PCI device driver.
 	 */
 	if (error_bits & (SCHIZO_PCIAFSR_PTA | SCHIZO_PCIAFSR_STA)) {
-		schizo_check_iommu_error(p, PCI_ERR);
+		schizo_check_iommu_error(pbm, PCI_ERR);
 		pci_scan_for_target_abort(pbm, pbm->pci_bus);
 	}
 	if (error_bits & (SCHIZO_PCIAFSR_PMA | SCHIZO_PCIAFSR_SMA))
@@ -805,12 +787,11 @@ static irqreturn_t schizo_pcierr_intr(int irq, void *dev_id)
 static irqreturn_t schizo_safarierr_intr(int irq, void *dev_id)
 {
 	struct pci_pbm_info *pbm = dev_id;
-	struct pci_controller_info *p = pbm->parent;
 	u64 errlog;
 
-	errlog = schizo_read(pbm->controller_regs + SCHIZO_SAFARI_ERRLOG);
-	schizo_write(pbm->controller_regs + SCHIZO_SAFARI_ERRLOG,
-		     errlog & ~(SAFARI_ERRLOG_ERROUT));
+	errlog = upa_readq(pbm->controller_regs + SCHIZO_SAFARI_ERRLOG);
+	upa_writeq(errlog & ~(SAFARI_ERRLOG_ERROUT),
+		   pbm->controller_regs + SCHIZO_SAFARI_ERRLOG);
 
 	if (!(errlog & BUS_ERROR_UNMAP)) {
 		printk("%s: Unexpected Safari/JBUS error interrupt, errlog[%016lx]\n",
@@ -821,7 +802,7 @@ static irqreturn_t schizo_safarierr_intr(int irq, void *dev_id)
 
 	printk("%s: Safari/JBUS interrupt, UNMAPPED error, interrogating IOMMUs.\n",
 	       pbm->name);
-	schizo_check_iommu_error(p, SAFARI_ERR);
+	schizo_check_iommu_error(pbm, SAFARI_ERR);
 
 	return IRQ_HANDLED;
 }
@@ -863,7 +844,7 @@ static int pbm_routes_this_ino(struct pci_pbm_info *pbm, u32 ino)
  */
 static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct of_device *op = of_find_device_by_node(pbm->prom_node);
+	struct of_device *op = of_find_device_by_node(pbm->op->node);
 	u64 tmp, err_mask, err_no_mask;
 	int err;
 
@@ -910,10 +891,9 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 	}
 
 	/* Enable UE and CE interrupts for controller. */
-	schizo_write(pbm->controller_regs + SCHIZO_ECC_CTRL,
-		     (SCHIZO_ECCCTRL_EE |
-		      SCHIZO_ECCCTRL_UE |
-		      SCHIZO_ECCCTRL_CE));
+	upa_writeq((SCHIZO_ECCCTRL_EE |
+		    SCHIZO_ECCCTRL_UE |
+		    SCHIZO_ECCCTRL_CE), pbm->controller_regs + SCHIZO_ECC_CTRL);
 
 	/* Enable PCI Error interrupts and clear error
 	 * bits.
@@ -926,10 +906,10 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 
 	err_no_mask = SCHIZO_PCICTRL_DTO_ERR;
 
-	tmp = schizo_read(pbm->pbm_regs + SCHIZO_PCI_CTRL);
+	tmp = upa_readq(pbm->pbm_regs + SCHIZO_PCI_CTRL);
 	tmp |= err_mask;
 	tmp &= ~err_no_mask;
-	schizo_write(pbm->pbm_regs + SCHIZO_PCI_CTRL, tmp);
+	upa_writeq(tmp, pbm->pbm_regs + SCHIZO_PCI_CTRL);
 
 	err_mask = (SCHIZO_PCIAFSR_PMA | SCHIZO_PCIAFSR_PTA |
 		    SCHIZO_PCIAFSR_PRTRY | SCHIZO_PCIAFSR_PPERR |
@@ -938,7 +918,7 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 		    SCHIZO_PCIAFSR_SRTRY | SCHIZO_PCIAFSR_SPERR |
 		    SCHIZO_PCIAFSR_STTO);
 
-	schizo_write(pbm->pbm_regs + SCHIZO_PCI_AFSR, err_mask);
+	upa_writeq(err_mask, pbm->pbm_regs + SCHIZO_PCI_AFSR);
 
 	err_mask = (BUS_ERROR_BADCMD | BUS_ERROR_SNOOP_GR |
 		    BUS_ERROR_SNOOP_PCI | BUS_ERROR_SNOOP_RD |
@@ -950,16 +930,16 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 		    BUS_ERROR_APERR | BUS_ERROR_UNMAP |
 		    BUS_ERROR_BUSERR | BUS_ERROR_TIMEOUT);
 
-	schizo_write(pbm->controller_regs + SCHIZO_SAFARI_ERRCTRL,
-		     (SCHIZO_SAFERRCTRL_EN | err_mask));
+	upa_writeq((SCHIZO_SAFERRCTRL_EN | err_mask),
+		   pbm->controller_regs + SCHIZO_SAFARI_ERRCTRL);
 
-	schizo_write(pbm->controller_regs + SCHIZO_SAFARI_IRQCTRL,
-		     (SCHIZO_SAFIRQCTRL_EN | (BUS_ERROR_UNMAP)));
+	upa_writeq((SCHIZO_SAFIRQCTRL_EN | (BUS_ERROR_UNMAP)),
+		   pbm->controller_regs + SCHIZO_SAFARI_IRQCTRL);
 }
 
 static void schizo_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct of_device *op = of_find_device_by_node(pbm->prom_node);
+	struct of_device *op = of_find_device_by_node(pbm->op->node);
 	u64 tmp, err_mask, err_no_mask;
 	int err;
 
@@ -1006,10 +986,9 @@ static void schizo_register_error_handlers(struct pci_pbm_info *pbm)
 	}
 
 	/* Enable UE and CE interrupts for controller. */
-	schizo_write(pbm->controller_regs + SCHIZO_ECC_CTRL,
-		     (SCHIZO_ECCCTRL_EE |
-		      SCHIZO_ECCCTRL_UE |
-		      SCHIZO_ECCCTRL_CE));
+	upa_writeq((SCHIZO_ECCCTRL_EE |
+		    SCHIZO_ECCCTRL_UE |
+		    SCHIZO_ECCCTRL_CE), pbm->controller_regs + SCHIZO_ECC_CTRL);
 
 	err_mask = (SCHIZO_PCICTRL_BUS_UNUS |
 		    SCHIZO_PCICTRL_ESLCK |
@@ -1025,18 +1004,18 @@ static void schizo_register_error_handlers(struct pci_pbm_info *pbm)
 	/* Enable PCI Error interrupts and clear error
 	 * bits for each PBM.
 	 */
-	tmp = schizo_read(pbm->pbm_regs + SCHIZO_PCI_CTRL);
+	tmp = upa_readq(pbm->pbm_regs + SCHIZO_PCI_CTRL);
 	tmp |= err_mask;
 	tmp &= ~err_no_mask;
-	schizo_write(pbm->pbm_regs + SCHIZO_PCI_CTRL, tmp);
+	upa_writeq(tmp, pbm->pbm_regs + SCHIZO_PCI_CTRL);
 
-	schizo_write(pbm->pbm_regs + SCHIZO_PCI_AFSR,
-		     (SCHIZO_PCIAFSR_PMA | SCHIZO_PCIAFSR_PTA |
-		      SCHIZO_PCIAFSR_PRTRY | SCHIZO_PCIAFSR_PPERR |
-		      SCHIZO_PCIAFSR_PTTO | SCHIZO_PCIAFSR_PUNUS |
-		      SCHIZO_PCIAFSR_SMA | SCHIZO_PCIAFSR_STA |
-		      SCHIZO_PCIAFSR_SRTRY | SCHIZO_PCIAFSR_SPERR |
-		      SCHIZO_PCIAFSR_STTO | SCHIZO_PCIAFSR_SUNUS));
+	upa_writeq((SCHIZO_PCIAFSR_PMA | SCHIZO_PCIAFSR_PTA |
+		    SCHIZO_PCIAFSR_PRTRY | SCHIZO_PCIAFSR_PPERR |
+		    SCHIZO_PCIAFSR_PTTO | SCHIZO_PCIAFSR_PUNUS |
+		    SCHIZO_PCIAFSR_SMA | SCHIZO_PCIAFSR_STA |
+		    SCHIZO_PCIAFSR_SRTRY | SCHIZO_PCIAFSR_SPERR |
+		    SCHIZO_PCIAFSR_STTO | SCHIZO_PCIAFSR_SUNUS),
+		   pbm->pbm_regs + SCHIZO_PCI_AFSR);
 
 	/* Make all Safari error conditions fatal except unmapped
 	 * errors which we make generate interrupts.
@@ -1063,8 +1042,8 @@ static void schizo_register_error_handlers(struct pci_pbm_info *pbm)
 		      BUS_ERROR_CPU0PS | BUS_ERROR_CPU0PB);
 #endif
 
-	schizo_write(pbm->controller_regs + SCHIZO_SAFARI_ERRCTRL,
-		     (SCHIZO_SAFERRCTRL_EN | err_mask));
+	upa_writeq((SCHIZO_SAFERRCTRL_EN | err_mask),
+		   pbm->controller_regs + SCHIZO_SAFARI_ERRCTRL);
 }
 
 static void pbm_config_busmastering(struct pci_pbm_info *pbm)
@@ -1084,14 +1063,15 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm)
 	pci_config_write8(addr, 64);
 }
 
-static void __init schizo_scan_bus(struct pci_pbm_info *pbm)
+static void __devinit schizo_scan_bus(struct pci_pbm_info *pbm,
+				      struct device *parent)
 {
 	pbm_config_busmastering(pbm);
 	pbm->is_66mhz_capable =
-		(of_find_property(pbm->prom_node, "66mhz-capable", NULL)
+		(of_find_property(pbm->op->node, "66mhz-capable", NULL)
 		 != NULL);
 
-	pbm->pci_bus = pci_scan_one_pbm(pbm);
+	pbm->pci_bus = pci_scan_one_pbm(pbm, parent);
 
 	if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO)
 		tomatillo_register_error_handlers(pbm);
@@ -1133,12 +1113,12 @@ static void schizo_pbm_strbuf_init(struct pci_pbm_info *pbm)
 	 * streaming buffer and leave the rerun-disable
 	 * setting however OBP set it.
 	 */
-	control = schizo_read(pbm->stc.strbuf_control);
+	control = upa_readq(pbm->stc.strbuf_control);
 	control &= ~(SCHIZO_STRBUF_CTRL_LPTR |
 		     SCHIZO_STRBUF_CTRL_LENAB |
 		     SCHIZO_STRBUF_CTRL_DENAB);
 	control |= SCHIZO_STRBUF_CTRL_ENAB;
-	schizo_write(pbm->stc.strbuf_control, control);
+	upa_writeq(control, pbm->stc.strbuf_control);
 
 	pbm->stc.strbuf_enabled = 1;
 }
@@ -1150,24 +1130,17 @@ static void schizo_pbm_strbuf_init(struct pci_pbm_info *pbm)
 
 static int schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 {
-	struct iommu *iommu = pbm->iommu;
+	static const u32 vdma_default[] = { 0xc0000000, 0x40000000 };
 	unsigned long i, tagbase, database;
-	struct property *prop;
-	u32 vdma[2], dma_mask;
+	struct iommu *iommu = pbm->iommu;
 	int tsbsize, err;
+	const u32 *vdma;
+	u32 dma_mask;
 	u64 control;
 
-	prop = of_find_property(pbm->prom_node, "virtual-dma", NULL);
-	if (prop) {
-		u32 *val = prop->value;
-
-		vdma[0] = val[0];
-		vdma[1] = val[1];
-	} else {
-		/* No property, use default values. */
-		vdma[0] = 0xc0000000;
-		vdma[1] = 0x40000000;
-	}
+	vdma = of_get_property(pbm->op->node, "virtual-dma", NULL);
+	if (!vdma)
+		vdma = vdma_default;
 
 	dma_mask = vdma[0];
 	switch (vdma[1]) {
@@ -1187,9 +1160,9 @@ static int schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 			break;
 
 		default:
-			prom_printf("SCHIZO: strange virtual-dma size.\n");
-			prom_halt();
-	};
+			printk(KERN_ERR PFX "Strange virtual-dma size.\n");
+			return -EINVAL;
+	}
 
 	/* Register addresses, SCHIZO has iommu ctx flushing. */
 	iommu->iommu_control  = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL;
@@ -1206,15 +1179,15 @@ static int schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 	/*
 	 * Invalidate TLB Entries.
 	 */
-	control = schizo_read(iommu->iommu_control);
+	control = upa_readq(iommu->iommu_control);
 	control |= SCHIZO_IOMMU_CTRL_DENAB;
-	schizo_write(iommu->iommu_control, control);
+	upa_writeq(control, iommu->iommu_control);
 
 	tagbase = SCHIZO_IOMMU_TAG, database = SCHIZO_IOMMU_DATA;
 
-	for(i = 0; i < 16; i++) {
-		schizo_write(pbm->pbm_regs + tagbase + (i * 8UL), 0);
-		schizo_write(pbm->pbm_regs + database + (i * 8UL), 0);
+	for (i = 0; i < 16; i++) {
+		upa_writeq(0, pbm->pbm_regs + tagbase + (i * 8UL));
+		upa_writeq(0, pbm->pbm_regs + database + (i * 8UL));
 	}
 
 	/* Leave diag mode enabled for full-flushing done
@@ -1222,12 +1195,14 @@ static int schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 	 */
 	err = iommu_table_init(iommu, tsbsize * 8 * 1024, vdma[0], dma_mask,
 			       pbm->numa_node);
-	if (err)
+	if (err) {
+		printk(KERN_ERR PFX "iommu_table_init() fails with %d\n", err);
 		return err;
+	}
 
-	schizo_write(iommu->iommu_tsbbase, __pa(iommu->page_table));
+	upa_writeq(__pa(iommu->page_table), iommu->iommu_tsbbase);
 
-	control = schizo_read(iommu->iommu_control);
+	control = upa_readq(iommu->iommu_control);
 	control &= ~(SCHIZO_IOMMU_CTRL_TSBSZ | SCHIZO_IOMMU_CTRL_TBWSZ);
 	switch (tsbsize) {
 	case 64:
@@ -1236,10 +1211,10 @@ static int schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 	case 128:
 		control |= SCHIZO_IOMMU_TSBSZ_128K;
 		break;
-	};
+	}
 
 	control |= SCHIZO_IOMMU_CTRL_ENAB;
-	schizo_write(iommu->iommu_control, control);
+	upa_writeq(control, iommu->iommu_control);
 
 	return 0;
 }
@@ -1280,12 +1255,11 @@ static int schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 
 static void schizo_pbm_hw_init(struct pci_pbm_info *pbm)
 {
-	struct property *prop;
 	u64 tmp;
 
-	schizo_write(pbm->pbm_regs + SCHIZO_PCI_IRQ_RETRY, 5);
+	upa_writeq(5, pbm->pbm_regs + SCHIZO_PCI_IRQ_RETRY);
 
-	tmp = schizo_read(pbm->pbm_regs + SCHIZO_PCI_CTRL);
+	tmp = upa_readq(pbm->pbm_regs + SCHIZO_PCI_CTRL);
 
 	/* Enable arbiter for all PCI slots.  */
 	tmp |= 0xff;
@@ -1294,8 +1268,7 @@ static void schizo_pbm_hw_init(struct pci_pbm_info *pbm)
 	    pbm->chip_version >= 0x2)
 		tmp |= 0x3UL << SCHIZO_PCICTRL_PTO_SHIFT;
 
-	prop = of_find_property(pbm->prom_node, "no-bus-parking", NULL);
-	if (!prop)
+	if (!of_find_property(pbm->op->node, "no-bus-parking", NULL))
 		tmp |= SCHIZO_PCICTRL_PARK;
 	else
 		tmp &= ~SCHIZO_PCICTRL_PARK;
@@ -1311,13 +1284,13 @@ static void schizo_pbm_hw_init(struct pci_pbm_info *pbm)
 			SCHIZO_PCICTRL_RDO_PREF |
 			SCHIZO_PCICTRL_RDL_PREF);
 
-	schizo_write(pbm->pbm_regs + SCHIZO_PCI_CTRL, tmp);
+	upa_writeq(tmp, pbm->pbm_regs + SCHIZO_PCI_CTRL);
 
-	tmp = schizo_read(pbm->pbm_regs + SCHIZO_PCI_DIAG);
+	tmp = upa_readq(pbm->pbm_regs + SCHIZO_PCI_DIAG);
 	tmp &= ~(SCHIZO_PCIDIAG_D_RTRYARB |
 		 SCHIZO_PCIDIAG_D_RETRY |
 		 SCHIZO_PCIDIAG_D_INTSYNC);
-	schizo_write(pbm->pbm_regs + SCHIZO_PCI_DIAG, tmp);
+	upa_writeq(tmp, pbm->pbm_regs + SCHIZO_PCI_DIAG);
 
 	if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO) {
 		/* Clear prefetch lengths to workaround a bug in
@@ -1329,17 +1302,16 @@ static void schizo_pbm_hw_init(struct pci_pbm_info *pbm)
 		       TOMATILLO_IOC_RDONE_CPENAB |
 		       TOMATILLO_IOC_RDLINE_CPENAB);
 
-		schizo_write(pbm->pbm_regs + TOMATILLO_PCI_IOC_CSR,
-			     tmp);
+		upa_writeq(tmp, pbm->pbm_regs + TOMATILLO_PCI_IOC_CSR);
 	}
 }
 
-static int __init schizo_pbm_init(struct pci_controller_info *p,
-				  struct device_node *dp, u32 portid,
-				  int chip_type)
+static int __devinit schizo_pbm_init(struct pci_pbm_info *pbm,
+				     struct of_device *op, u32 portid,
+				     int chip_type)
 {
 	const struct linux_prom64_registers *regs;
-	struct pci_pbm_info *pbm;
+	struct device_node *dp = op->node;
 	const char *chipset_name;
 	int is_pbm_a, err;
 
@@ -1372,25 +1344,19 @@ static int __init schizo_pbm_init(struct pci_controller_info *p,
 	regs = of_get_property(dp, "reg", NULL);
 
 	is_pbm_a = ((regs[0].phys_addr & 0x00700000) == 0x00600000);
-	if (is_pbm_a)
-		pbm = &p->pbm_A;
-	else
-		pbm = &p->pbm_B;
 
 	pbm->next = pci_pbm_root;
 	pci_pbm_root = pbm;
 
 	pbm->numa_node = -1;
 
-	pbm->scan_bus = schizo_scan_bus;
 	pbm->pci_ops = &sun4u_pci_ops;
 	pbm->config_space_reg_bits = 8;
 
 	pbm->index = pci_num_pbms++;
 
 	pbm->portid = portid;
-	pbm->parent = p;
-	pbm->prom_node = dp;
+	pbm->op = op;
 
 	pbm->chip_type = chip_type;
 	pbm->chip_version = of_getintprop_default(dp, "version#", 0);
@@ -1420,6 +1386,8 @@ static int __init schizo_pbm_init(struct pci_controller_info *p,
 
 	schizo_pbm_strbuf_init(pbm);
 
+	schizo_scan_bus(pbm, &op->dev);
+
 	return 0;
 }
 
@@ -1433,62 +1401,104 @@ static inline int portid_compare(u32 x, u32 y, int chip_type)
 	return (x == y);
 }
 
-static void __init __schizo_init(struct device_node *dp, char *model_name,
-				 int chip_type)
+static struct pci_pbm_info * __devinit schizo_find_sibling(u32 portid,
+							   int chip_type)
 {
-	struct pci_controller_info *p;
+	struct pci_pbm_info *pbm;
+
+	for (pbm = pci_pbm_root; pbm; pbm = pbm->next) {
+		if (portid_compare(pbm->portid, portid, chip_type))
+			return pbm;
+	}
+	return NULL;
+}
+
+static int __devinit __schizo_init(struct of_device *op, unsigned long chip_type)
+{
+	struct device_node *dp = op->node;
 	struct pci_pbm_info *pbm;
 	struct iommu *iommu;
 	u32 portid;
+	int err;
 
 	portid = of_getintprop_default(dp, "portid", 0xff);
 
-	for (pbm = pci_pbm_root; pbm; pbm = pbm->next) {
-		if (portid_compare(pbm->portid, portid, chip_type)) {
-			if (schizo_pbm_init(pbm->parent, dp,
-					    portid, chip_type))
-				goto fatal_memory_error;
-			return;
-		}
+	err = -ENOMEM;
+	pbm = kzalloc(sizeof(*pbm), GFP_KERNEL);
+	if (!pbm) {
+		printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n");
+		goto out_err;
+	}
+
+	pbm->sibling = schizo_find_sibling(portid, chip_type);
+
+	iommu = kzalloc(sizeof(struct iommu), GFP_KERNEL);
+	if (!iommu) {
+		printk(KERN_ERR PFX "Cannot allocate PBM A iommu.\n");
+		goto out_free_pbm;
 	}
 
-	p = kzalloc(sizeof(struct pci_controller_info), GFP_ATOMIC);
-	if (!p)
-		goto fatal_memory_error;
+	pbm->iommu = iommu;
 
-	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
-	if (!iommu)
-		goto fatal_memory_error;
+	if (schizo_pbm_init(pbm, op, portid, chip_type))
+		goto out_free_iommu;
 
-	p->pbm_A.iommu = iommu;
+	if (pbm->sibling)
+		pbm->sibling->sibling = pbm;
 
-	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
-	if (!iommu)
-		goto fatal_memory_error;
+	dev_set_drvdata(&op->dev, pbm);
 
-	p->pbm_B.iommu = iommu;
+	return 0;
 
-	if (schizo_pbm_init(p, dp, portid, chip_type))
-		goto fatal_memory_error;
+out_free_iommu:
+	kfree(pbm->iommu);
 
-	return;
+out_free_pbm:
+	kfree(pbm);
 
-fatal_memory_error:
-	prom_printf("SCHIZO: Fatal memory allocation error.\n");
-	prom_halt();
+out_err:
+	return err;
 }
 
-void __init schizo_init(struct device_node *dp, char *model_name)
+static int __devinit schizo_probe(struct of_device *op,
+				  const struct of_device_id *match)
 {
-	__schizo_init(dp, model_name, PBM_CHIP_TYPE_SCHIZO);
+	return __schizo_init(op, (unsigned long) match->data);
 }
 
-void __init schizo_plus_init(struct device_node *dp, char *model_name)
-{
-	__schizo_init(dp, model_name, PBM_CHIP_TYPE_SCHIZO_PLUS);
-}
+/* The ordering of this table is very important.  Some Tomatillo
+ * nodes announce that they are compatible with both pci108e,a801
+ * and pci108e,8001.  So list the chips in reverse chronological
+ * order.
+ */
+static struct of_device_id __initdata schizo_match[] = {
+	{
+		.name = "pci",
+		.compatible = "pci108e,a801",
+		.data = (void *) PBM_CHIP_TYPE_TOMATILLO,
+	},
+	{
+		.name = "pci",
+		.compatible = "pci108e,8002",
+		.data = (void *) PBM_CHIP_TYPE_SCHIZO_PLUS,
+	},
+	{
+		.name = "pci",
+		.compatible = "pci108e,8001",
+		.data = (void *) PBM_CHIP_TYPE_SCHIZO,
+	},
+	{},
+};
 
-void __init tomatillo_init(struct device_node *dp, char *model_name)
+static struct of_platform_driver schizo_driver = {
+	.name		= DRIVER_NAME,
+	.match_table	= schizo_match,
+	.probe		= schizo_probe,
+};
+
+static int __init schizo_init(void)
 {
-	__schizo_init(dp, model_name, PBM_CHIP_TYPE_TOMATILLO);
+	return of_register_driver(&schizo_driver, &of_bus_type);
 }
+
+subsys_initcall(schizo_init);
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index a104c80..34a1fde 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -13,12 +13,10 @@
 #include <linux/irq.h>
 #include <linux/msi.h>
 #include <linux/log2.h>
+#include <linux/of_device.h>
 
 #include <asm/iommu.h>
 #include <asm/irq.h>
-#include <asm/upa.h>
-#include <asm/pstate.h>
-#include <asm/oplib.h>
 #include <asm/hypervisor.h>
 #include <asm/prom.h>
 
@@ -27,6 +25,9 @@
 
 #include "pci_sun4v.h"
 
+#define DRIVER_NAME	"pci_sun4v"
+#define PFX		DRIVER_NAME ": "
+
 static unsigned long vpci_major = 1;
 static unsigned long vpci_minor = 1;
 
@@ -41,6 +42,7 @@ struct iommu_batch {
 };
 
 static DEFINE_PER_CPU(struct iommu_batch, iommu_batch);
+static int iommu_batch_initialized;
 
 /* Interrupts must be disabled.  */
 static inline void iommu_batch_start(struct device *dev, unsigned long prot, unsigned long entry)
@@ -382,7 +384,7 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
 		}
 		/* Allocate iommu entries for that segment */
 		paddr = (unsigned long) SG_ENT_PHYS_ADDRESS(s);
-		npages = iommu_num_pages(paddr, slen);
+		npages = iommu_num_pages(paddr, slen, IO_PAGE_SIZE);
 		entry = iommu_range_alloc(dev, iommu, npages, &handle);
 
 		/* Handle failure */
@@ -459,7 +461,8 @@ iommu_map_failed:
 			unsigned long vaddr, npages;
 
 			vaddr = s->dma_address & IO_PAGE_MASK;
-			npages = iommu_num_pages(s->dma_address, s->dma_length);
+			npages = iommu_num_pages(s->dma_address, s->dma_length,
+						 IO_PAGE_SIZE);
 			iommu_range_free(iommu, vaddr, npages);
 			/* XXX demap? XXX */
 			s->dma_address = DMA_ERROR_CODE;
@@ -498,7 +501,7 @@ static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist,
 
 		if (!len)
 			break;
-		npages = iommu_num_pages(dma_handle, len);
+		npages = iommu_num_pages(dma_handle, len, IO_PAGE_SIZE);
 		iommu_range_free(iommu, dma_handle, npages);
 
 		entry = ((dma_handle - iommu->page_table_map_base) >> IO_PAGE_SHIFT);
@@ -542,15 +545,16 @@ static const struct dma_ops sun4v_dma_ops = {
 	.sync_sg_for_cpu		= dma_4v_sync_sg_for_cpu,
 };
 
-static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm)
+static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
+				      struct device *parent)
 {
 	struct property *prop;
 	struct device_node *dp;
 
-	dp = pbm->prom_node;
+	dp = pbm->op->node;
 	prop = of_find_property(dp, "66mhz-capable", NULL);
 	pbm->is_66mhz_capable = (prop != NULL);
-	pbm->pci_bus = pci_scan_one_pbm(pbm);
+	pbm->pci_bus = pci_scan_one_pbm(pbm, parent);
 
 	/* XXX register error interrupt handlers XXX */
 }
@@ -583,29 +587,22 @@ static unsigned long __init probe_existing_entries(struct pci_pbm_info *pbm,
 	return cnt;
 }
 
-static void __init pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
+static int __init pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
 {
+	static const u32 vdma_default[] = { 0x80000000, 0x80000000 };
 	struct iommu *iommu = pbm->iommu;
-	struct property *prop;
 	unsigned long num_tsb_entries, sz, tsbsize;
-	u32 vdma[2], dma_mask, dma_offset;
-
-	prop = of_find_property(pbm->prom_node, "virtual-dma", NULL);
-	if (prop) {
-		u32 *val = prop->value;
-
-		vdma[0] = val[0];
-		vdma[1] = val[1];
-	} else {
-		/* No property, use default values. */
-		vdma[0] = 0x80000000;
-		vdma[1] = 0x80000000;
-	}
+	u32 dma_mask, dma_offset;
+	const u32 *vdma;
+
+	vdma = of_get_property(pbm->op->node, "virtual-dma", NULL);
+	if (!vdma)
+		vdma = vdma_default;
 
 	if ((vdma[0] | vdma[1]) & ~IO_PAGE_MASK) {
-		prom_printf("PCI-SUN4V: strange virtual-dma[%08x:%08x].\n",
-			    vdma[0], vdma[1]);
-		prom_halt();
+		printk(KERN_ERR PFX "Strange virtual-dma[%08x:%08x].\n",
+		       vdma[0], vdma[1]);
+		return -EINVAL;
 	};
 
 	dma_mask = (roundup_pow_of_two(vdma[1]) - 1UL);
@@ -625,8 +622,8 @@ static void __init pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
 	sz = (sz + 7UL) & ~7UL;
 	iommu->arena.map = kzalloc(sz, GFP_KERNEL);
 	if (!iommu->arena.map) {
-		prom_printf("PCI_IOMMU: Error, kmalloc(arena.map) failed.\n");
-		prom_halt();
+		printk(KERN_ERR PFX "Error, kmalloc(arena.map) failed.\n");
+		return -ENOMEM;
 	}
 	iommu->arena.limit = num_tsb_entries;
 
@@ -634,6 +631,8 @@ static void __init pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
 	if (sz)
 		printk("%s: Imported %lu TSB entries from OBP\n",
 		       pbm->name, sz);
+
+	return 0;
 }
 
 #ifdef CONFIG_PCI_MSI
@@ -890,29 +889,20 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm)
 }
 #endif /* !(CONFIG_PCI_MSI) */
 
-static void __init pci_sun4v_pbm_init(struct pci_controller_info *p,
-				      struct device_node *dp, u32 devhandle)
+static int __init pci_sun4v_pbm_init(struct pci_pbm_info *pbm,
+				     struct of_device *op, u32 devhandle)
 {
-	struct pci_pbm_info *pbm;
-
-	if (devhandle & 0x40)
-		pbm = &p->pbm_B;
-	else
-		pbm = &p->pbm_A;
-
-	pbm->next = pci_pbm_root;
-	pci_pbm_root = pbm;
+	struct device_node *dp = op->node;
+	int err;
 
 	pbm->numa_node = of_node_to_nid(dp);
 
-	pbm->scan_bus = pci_sun4v_scan_bus;
 	pbm->pci_ops = &sun4v_pci_ops;
 	pbm->config_space_reg_bits = 12;
 
 	pbm->index = pci_num_pbms++;
 
-	pbm->parent = p;
-	pbm->prom_node = dp;
+	pbm->op = op;
 
 	pbm->devhandle = devhandle;
 
@@ -924,82 +914,120 @@ static void __init pci_sun4v_pbm_init(struct pci_controller_info *p,
 	pci_determine_mem_io_space(pbm);
 
 	pci_get_pbm_props(pbm);
-	pci_sun4v_iommu_init(pbm);
+
+	err = pci_sun4v_iommu_init(pbm);
+	if (err)
+		return err;
+
 	pci_sun4v_msi_init(pbm);
+
+	pci_sun4v_scan_bus(pbm, &op->dev);
+
+	pbm->next = pci_pbm_root;
+	pci_pbm_root = pbm;
+
+	return 0;
 }
 
-void __init sun4v_pci_init(struct device_node *dp, char *model_name)
+static int __devinit pci_sun4v_probe(struct of_device *op,
+				     const struct of_device_id *match)
 {
+	const struct linux_prom64_registers *regs;
 	static int hvapi_negotiated = 0;
-	struct pci_controller_info *p;
 	struct pci_pbm_info *pbm;
+	struct device_node *dp;
 	struct iommu *iommu;
-	struct property *prop;
-	struct linux_prom64_registers *regs;
 	u32 devhandle;
-	int i;
+	int i, err;
+
+	dp = op->node;
 
 	if (!hvapi_negotiated++) {
-		int err = sun4v_hvapi_register(HV_GRP_PCI,
-					       vpci_major,
-					       &vpci_minor);
+		err = sun4v_hvapi_register(HV_GRP_PCI,
+					   vpci_major,
+					   &vpci_minor);
 
 		if (err) {
-			prom_printf("SUN4V_PCI: Could not register hvapi, "
-				    "err=%d\n", err);
-			prom_halt();
+			printk(KERN_ERR PFX "Could not register hvapi, "
+			       "err=%d\n", err);
+			return err;
 		}
-		printk("SUN4V_PCI: Registered hvapi major[%lu] minor[%lu]\n",
+		printk(KERN_INFO PFX "Registered hvapi major[%lu] minor[%lu]\n",
 		       vpci_major, vpci_minor);
 
 		dma_ops = &sun4v_dma_ops;
 	}
 
-	prop = of_find_property(dp, "reg", NULL);
-	if (!prop) {
-		prom_printf("SUN4V_PCI: Could not find config registers\n");
-		prom_halt();
+	regs = of_get_property(dp, "reg", NULL);
+	err = -ENODEV;
+	if (!regs) {
+		printk(KERN_ERR PFX "Could not find config registers\n");
+		goto out_err;
 	}
-	regs = prop->value;
-
 	devhandle = (regs->phys_addr >> 32UL) & 0x0fffffff;
 
-	for (pbm = pci_pbm_root; pbm; pbm = pbm->next) {
-		if (pbm->devhandle == (devhandle ^ 0x40)) {
-			pci_sun4v_pbm_init(pbm->parent, dp, devhandle);
-			return;
+	err = -ENOMEM;
+	if (!iommu_batch_initialized) {
+		for_each_possible_cpu(i) {
+			unsigned long page = get_zeroed_page(GFP_KERNEL);
+
+			if (!page)
+				goto out_err;
+
+			per_cpu(iommu_batch, i).pglist = (u64 *) page;
 		}
+		iommu_batch_initialized = 1;
 	}
 
-	for_each_possible_cpu(i) {
-		unsigned long page = get_zeroed_page(GFP_ATOMIC);
-
-		if (!page)
-			goto fatal_memory_error;
+	pbm = kzalloc(sizeof(*pbm), GFP_KERNEL);
+	if (!pbm) {
+		printk(KERN_ERR PFX "Could not allocate pci_pbm_info\n");
+		goto out_err;
+	}
 
-		per_cpu(iommu_batch, i).pglist = (u64 *) page;
+	iommu = kzalloc(sizeof(struct iommu), GFP_KERNEL);
+	if (!iommu) {
+		printk(KERN_ERR PFX "Could not allocate pbm iommu\n");
+		goto out_free_controller;
 	}
 
-	p = kzalloc(sizeof(struct pci_controller_info), GFP_ATOMIC);
-	if (!p)
-		goto fatal_memory_error;
+	pbm->iommu = iommu;
 
-	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
-	if (!iommu)
-		goto fatal_memory_error;
+	err = pci_sun4v_pbm_init(pbm, op, devhandle);
+	if (err)
+		goto out_free_iommu;
+
+	dev_set_drvdata(&op->dev, pbm);
+
+	return 0;
+
+out_free_iommu:
+	kfree(pbm->iommu);
 
-	p->pbm_A.iommu = iommu;
+out_free_controller:
+	kfree(pbm);
 
-	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
-	if (!iommu)
-		goto fatal_memory_error;
+out_err:
+	return err;
+}
 
-	p->pbm_B.iommu = iommu;
+static struct of_device_id __initdata pci_sun4v_match[] = {
+	{
+		.name = "pci",
+		.compatible = "SUNW,sun4v-pci",
+	},
+	{},
+};
 
-	pci_sun4v_pbm_init(p, dp, devhandle);
-	return;
+static struct of_platform_driver pci_sun4v_driver = {
+	.name		= DRIVER_NAME,
+	.match_table	= pci_sun4v_match,
+	.probe		= pci_sun4v_probe,
+};
 
-fatal_memory_error:
-	prom_printf("SUN4V_PCI: Fatal memory allocation error.\n");
-	prom_halt();
+static int __init pci_sun4v_init(void)
+{
+	return of_register_driver(&pci_sun4v_driver, &of_bus_type);
 }
+
+subsys_initcall(pci_sun4v_init);
diff --git a/arch/sparc64/kernel/pci_sun4v_asm.S b/arch/sparc64/kernel/pci_sun4v_asm.S
index ecb81f3..e606d46 100644
--- a/arch/sparc64/kernel/pci_sun4v_asm.S
+++ b/arch/sparc64/kernel/pci_sun4v_asm.S
@@ -1,8 +1,9 @@
 /* pci_sun4v_asm: Hypervisor calls for PCI support.
  *
- * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2006, 2008 David S. Miller <davem@davemloft.net>
  */
 
+#include <linux/linkage.h>
 #include <asm/hypervisor.h>
 
 	/* %o0: devhandle
@@ -14,8 +15,7 @@
 	 * returns %o0:	-status if status was non-zero, else
 	 *         %o0:	num pages mapped
 	 */
-	.globl	pci_sun4v_iommu_map
-pci_sun4v_iommu_map:
+ENTRY(pci_sun4v_iommu_map)
 	mov	%o5, %g1
 	mov	HV_FAST_PCI_IOMMU_MAP, %o5
 	ta	HV_FAST_TRAP
@@ -24,6 +24,7 @@ pci_sun4v_iommu_map:
 	mov	%o1, %o0
 1:	retl
 	 nop
+ENDPROC(pci_sun4v_iommu_map)
 
 	/* %o0: devhandle
 	 * %o1:	tsbid
@@ -31,12 +32,12 @@ pci_sun4v_iommu_map:
 	 *
 	 * returns %o0:	num ttes demapped
 	 */
-	.globl	pci_sun4v_iommu_demap
-pci_sun4v_iommu_demap:
+ENTRY(pci_sun4v_iommu_demap)
 	mov	HV_FAST_PCI_IOMMU_DEMAP, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o1, %o0
+ENDPROC(pci_sun4v_iommu_demap)
 
 	/* %o0: devhandle
 	 * %o1:	tsbid
@@ -45,8 +46,7 @@ pci_sun4v_iommu_demap:
 	 *
 	 * returns %o0:	status
 	 */
-	.globl	pci_sun4v_iommu_getmap
-pci_sun4v_iommu_getmap:
+ENTRY(pci_sun4v_iommu_getmap)
 	mov	%o2, %o4
 	mov	HV_FAST_PCI_IOMMU_GETMAP, %o5
 	ta	HV_FAST_TRAP
@@ -54,6 +54,7 @@ pci_sun4v_iommu_getmap:
 	stx	%o2, [%o3]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_iommu_getmap)
 
 	/* %o0: devhandle
 	 * %o1:	pci_device
@@ -65,14 +66,14 @@ pci_sun4v_iommu_getmap:
 	 * If there is an error, the data will be returned
 	 * as all 1's.
 	 */
-	.globl	pci_sun4v_config_get
-pci_sun4v_config_get:
+ENTRY(pci_sun4v_config_get)
 	mov	HV_FAST_PCI_CONFIG_GET, %o5
 	ta	HV_FAST_TRAP
 	brnz,a,pn %o1, 1f
 	 mov	-1, %o2
 1:	retl
 	 mov	%o2, %o0
+ENDPROC(pci_sun4v_config_get)
 
 	/* %o0: devhandle
 	 * %o1:	pci_device
@@ -85,14 +86,14 @@ pci_sun4v_config_get:
 	 * status will be zero if the operation completed
 	 * successfully, else -1 if not
 	 */
-	.globl	pci_sun4v_config_put
-pci_sun4v_config_put:
+ENTRY(pci_sun4v_config_put)
 	mov	HV_FAST_PCI_CONFIG_PUT, %o5
 	ta	HV_FAST_TRAP
 	brnz,a,pn %o1, 1f
 	 mov	-1, %o1
 1:	retl
 	 mov	%o1, %o0
+ENDPROC(pci_sun4v_config_put)
 
 	/* %o0: devhandle
 	 * %o1: msiqid
@@ -104,12 +105,12 @@ pci_sun4v_config_put:
 	 * status will be zero if the operation completed
 	 * successfully, else -1 if not
 	 */
-	.globl	pci_sun4v_msiq_conf
-pci_sun4v_msiq_conf:
+ENTRY(pci_sun4v_msiq_conf)
 	mov	HV_FAST_PCI_MSIQ_CONF, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msiq_conf)
 
 	/* %o0: devhandle
 	 * %o1: msiqid
@@ -118,8 +119,7 @@ pci_sun4v_msiq_conf:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msiq_info
-pci_sun4v_msiq_info:
+ENTRY(pci_sun4v_msiq_info)
 	mov	%o2, %o4
 	mov	HV_FAST_PCI_MSIQ_INFO, %o5
 	ta	HV_FAST_TRAP
@@ -127,6 +127,7 @@ pci_sun4v_msiq_info:
 	stx	%o2, [%o3]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msiq_info)
 
 	/* %o0: devhandle
 	 * %o1: msiqid
@@ -134,13 +135,13 @@ pci_sun4v_msiq_info:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msiq_getvalid
-pci_sun4v_msiq_getvalid:
+ENTRY(pci_sun4v_msiq_getvalid)
 	mov	HV_FAST_PCI_MSIQ_GETVALID, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o2]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msiq_getvalid)
 
 	/* %o0: devhandle
 	 * %o1: msiqid
@@ -148,12 +149,12 @@ pci_sun4v_msiq_getvalid:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msiq_setvalid
-pci_sun4v_msiq_setvalid:
+ENTRY(pci_sun4v_msiq_setvalid)
 	mov	HV_FAST_PCI_MSIQ_SETVALID, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msiq_setvalid)
 
 	/* %o0: devhandle
 	 * %o1: msiqid
@@ -161,13 +162,13 @@ pci_sun4v_msiq_setvalid:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msiq_getstate
-pci_sun4v_msiq_getstate:
+ENTRY(pci_sun4v_msiq_getstate)
 	mov	HV_FAST_PCI_MSIQ_GETSTATE, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o2]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msiq_getstate)
 
 	/* %o0: devhandle
 	 * %o1: msiqid
@@ -175,12 +176,12 @@ pci_sun4v_msiq_getstate:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msiq_setstate
-pci_sun4v_msiq_setstate:
+ENTRY(pci_sun4v_msiq_setstate)
 	mov	HV_FAST_PCI_MSIQ_SETSTATE, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msiq_setstate)
 
 	/* %o0: devhandle
 	 * %o1: msiqid
@@ -188,13 +189,13 @@ pci_sun4v_msiq_setstate:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msiq_gethead
-pci_sun4v_msiq_gethead:
+ENTRY(pci_sun4v_msiq_gethead)
 	mov	HV_FAST_PCI_MSIQ_GETHEAD, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o2]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msiq_gethead)
 
 	/* %o0: devhandle
 	 * %o1: msiqid
@@ -202,12 +203,12 @@ pci_sun4v_msiq_gethead:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msiq_sethead
-pci_sun4v_msiq_sethead:
+ENTRY(pci_sun4v_msiq_sethead)
 	mov	HV_FAST_PCI_MSIQ_SETHEAD, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msiq_sethead)
 
 	/* %o0: devhandle
 	 * %o1: msiqid
@@ -215,13 +216,13 @@ pci_sun4v_msiq_sethead:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msiq_gettail
-pci_sun4v_msiq_gettail:
+ENTRY(pci_sun4v_msiq_gettail)
 	mov	HV_FAST_PCI_MSIQ_GETTAIL, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o2]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msiq_gettail)
 
 	/* %o0: devhandle
 	 * %o1: msinum
@@ -229,13 +230,13 @@ pci_sun4v_msiq_gettail:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msi_getvalid
-pci_sun4v_msi_getvalid:
+ENTRY(pci_sun4v_msi_getvalid)
 	mov	HV_FAST_PCI_MSI_GETVALID, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o2]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msi_getvalid)
 
 	/* %o0: devhandle
 	 * %o1: msinum
@@ -243,12 +244,12 @@ pci_sun4v_msi_getvalid:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msi_setvalid
-pci_sun4v_msi_setvalid:
+ENTRY(pci_sun4v_msi_setvalid)
 	mov	HV_FAST_PCI_MSI_SETVALID, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msi_setvalid)
 
 	/* %o0: devhandle
 	 * %o1: msinum
@@ -256,13 +257,13 @@ pci_sun4v_msi_setvalid:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msi_getmsiq
-pci_sun4v_msi_getmsiq:
+ENTRY(pci_sun4v_msi_getmsiq)
 	mov	HV_FAST_PCI_MSI_GETMSIQ, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o2]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msi_getmsiq)
 
 	/* %o0: devhandle
 	 * %o1: msinum
@@ -271,12 +272,12 @@ pci_sun4v_msi_getmsiq:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msi_setmsiq
-pci_sun4v_msi_setmsiq:
+ENTRY(pci_sun4v_msi_setmsiq)
 	mov	HV_FAST_PCI_MSI_SETMSIQ, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msi_setmsiq)
 
 	/* %o0: devhandle
 	 * %o1: msinum
@@ -284,13 +285,13 @@ pci_sun4v_msi_setmsiq:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msi_getstate
-pci_sun4v_msi_getstate:
+ENTRY(pci_sun4v_msi_getstate)
 	mov	HV_FAST_PCI_MSI_GETSTATE, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o2]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msi_getstate)
 
 	/* %o0: devhandle
 	 * %o1: msinum
@@ -298,12 +299,12 @@ pci_sun4v_msi_getstate:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msi_setstate
-pci_sun4v_msi_setstate:
+ENTRY(pci_sun4v_msi_setstate)
 	mov	HV_FAST_PCI_MSI_SETSTATE, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msi_setstate)
 
 	/* %o0: devhandle
 	 * %o1: msinum
@@ -311,13 +312,13 @@ pci_sun4v_msi_setstate:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msg_getmsiq
-pci_sun4v_msg_getmsiq:
+ENTRY(pci_sun4v_msg_getmsiq)
 	mov	HV_FAST_PCI_MSG_GETMSIQ, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o2]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msg_getmsiq)
 
 	/* %o0: devhandle
 	 * %o1: msinum
@@ -325,12 +326,12 @@ pci_sun4v_msg_getmsiq:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msg_setmsiq
-pci_sun4v_msg_setmsiq:
+ENTRY(pci_sun4v_msg_setmsiq)
 	mov	HV_FAST_PCI_MSG_SETMSIQ, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msg_setmsiq)
 
 	/* %o0: devhandle
 	 * %o1: msinum
@@ -338,13 +339,13 @@ pci_sun4v_msg_setmsiq:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msg_getvalid
-pci_sun4v_msg_getvalid:
+ENTRY(pci_sun4v_msg_getvalid)
 	mov	HV_FAST_PCI_MSG_GETVALID, %o5
 	ta	HV_FAST_TRAP
 	stx	%o1, [%o2]
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msg_getvalid)
 
 	/* %o0: devhandle
 	 * %o1: msinum
@@ -352,10 +353,10 @@ pci_sun4v_msg_getvalid:
 	 *
 	 * returns %o0: status
 	 */
-	.globl	pci_sun4v_msg_setvalid
-pci_sun4v_msg_setvalid:
+ENTRY(pci_sun4v_msg_setvalid)
 	mov	HV_FAST_PCI_MSG_SETVALID, %o5
 	ta	HV_FAST_TRAP
 	retl
 	 mov	%o0, %o0
+ENDPROC(pci_sun4v_msg_setvalid)
 
diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c
index 3bb987a..076cad7 100644
--- a/arch/sparc64/kernel/power.c
+++ b/arch/sparc64/kernel/power.c
@@ -1,34 +1,17 @@
 /* power.c: Power management driver.
  *
- * Copyright (C) 1999, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1999, 2007, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <linux/syscalls.h>
 #include <linux/reboot.h>
 #include <linux/of_device.h>
 
-#include <asm/system.h>
-#include <asm/auxio.h>
 #include <asm/prom.h>
 #include <asm/io.h>
-#include <asm/sstate.h>
-#include <asm/reboot.h>
-
-#include <linux/unistd.h>
-
-/*
- * sysctl - toggle power-off restriction for serial console 
- * systems in machine_power_off()
- */
-int scons_pwroff = 1; 
 
 static void __iomem *power_reg;
 
@@ -40,31 +23,6 @@ static irqreturn_t power_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void (*poweroff_method)(void) = machine_alt_power_off;
-
-void machine_power_off(void)
-{
-	sstate_poweroff();
-	if (strcmp(of_console_device->type, "serial") || scons_pwroff) {
-		if (power_reg) {
-			/* Both register bits seem to have the
-			 * same effect, so until I figure out
-			 * what the difference is...
-			 */
-			writel(AUXIO_PCIO_CPWR_OFF | AUXIO_PCIO_SPWR_OFF, power_reg);
-		} else {
-			if (poweroff_method != NULL) {
-				poweroff_method();
-				/* not reached */
-			}
-		}
-	}
-	machine_halt();
-}
-
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 static int __init has_button_interrupt(unsigned int irq, struct device_node *dp)
 {
 	if (irq == 0xffffffff)
@@ -85,8 +43,6 @@ static int __devinit power_probe(struct of_device *op, const struct of_device_id
 	printk(KERN_INFO "%s: Control reg at %lx\n",
 	       op->node->name, res->start);
 
-	poweroff_method = machine_halt;  /* able to use the standard halt */
-
 	if (has_button_interrupt(irq, op->node)) {
 		if (request_irq(irq,
 				power_handler, 0, "power", NULL) < 0)
@@ -96,7 +52,7 @@ static int __devinit power_probe(struct of_device *op, const struct of_device_id
 	return 0;
 }
 
-static struct of_device_id power_match[] = {
+static struct of_device_id __initdata power_match[] = {
 	{
 		.name = "power",
 	},
@@ -111,8 +67,9 @@ static struct of_platform_driver power_driver = {
 	},
 };
 
-void __init power_init(void)
+static int __init power_init(void)
 {
-	of_register_driver(&power_driver, &of_platform_bus_type);
-	return;
+	return of_register_driver(&power_driver, &of_platform_bus_type);
 }
+
+device_initcall(power_init);
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 15f4178..d5e2ace 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -22,7 +22,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/reboot.h>
 #include <linux/delay.h>
 #include <linux/compat.h>
 #include <linux/tick.h>
@@ -31,7 +30,6 @@
 #include <linux/elfcore.h>
 #include <linux/sysrq.h>
 
-#include <asm/oplib.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 #include <asm/page.h>
@@ -46,8 +44,6 @@
 #include <asm/mmu_context.h>
 #include <asm/unistd.h>
 #include <asm/hypervisor.h>
-#include <asm/sstate.h>
-#include <asm/reboot.h>
 #include <asm/syscalls.h>
 #include <asm/irq_regs.h>
 #include <asm/smp.h>
@@ -115,35 +111,6 @@ void cpu_idle(void)
 	}
 }
 
-void machine_halt(void)
-{
-	sstate_halt();
-	prom_halt();
-	panic("Halt failed!");
-}
-
-void machine_alt_power_off(void)
-{
-	sstate_poweroff();
-	prom_halt_power_off();
-	panic("Power-off failed!");
-}
-
-void machine_restart(char * cmd)
-{
-	char *p;
-	
-	sstate_reboot();
-	p = strchr (reboot_command, '\n');
-	if (p) *p = 0;
-	if (cmd)
-		prom_reboot(cmd);
-	if (*reboot_command)
-		prom_reboot(reboot_command);
-	prom_reboot("");
-	panic("Reboot failed!");
-}
-
 #ifdef CONFIG_COMPAT
 static void show_regwindow32(struct pt_regs *regs)
 {
@@ -248,7 +215,6 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs,
 	global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7];
 
 	if (regs->tstate & TSTATE_PRIV) {
-		struct thread_info *tp = current_thread_info();
 		struct reg_window *rw;
 
 		rw = (struct reg_window *)
@@ -304,7 +270,6 @@ void __trigger_all_cpu_backtrace(void)
 
 	for_each_online_cpu(cpu) {
 		struct global_reg_snapshot *gp = &global_reg_snapshot[cpu];
-		struct thread_info *tp;
 
 		__global_reg_poll(gp);
 
diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c
index 7151513..dbba82f 100644
--- a/arch/sparc64/kernel/prom.c
+++ b/arch/sparc64/kernel/prom.c
@@ -38,7 +38,7 @@ struct device_node *of_find_node_by_phandle(phandle handle)
 {
 	struct device_node *np;
 
-	for (np = allnodes; np != 0; np = np->allnext)
+	for (np = allnodes; np; np = np->allnext)
 		if (np->node == handle)
 			break;
 
@@ -59,6 +59,9 @@ int of_getintprop_default(struct device_node *np, const char *name, int def)
 }
 EXPORT_SYMBOL(of_getintprop_default);
 
+DEFINE_MUTEX(of_set_property_mutex);
+EXPORT_SYMBOL(of_set_property_mutex);
+
 int of_set_property(struct device_node *dp, const char *name, void *val, int len)
 {
 	struct property **prevp;
@@ -82,7 +85,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 			void *old_val = prop->value;
 			int ret;
 
+			mutex_lock(&of_set_property_mutex);
 			ret = prom_setprop(dp->node, name, val, len);
+			mutex_unlock(&of_set_property_mutex);
+
 			err = -EINVAL;
 			if (ret >= 0) {
 				prop->value = new_val;
@@ -945,22 +951,30 @@ static void __init irq_trans_init(struct device_node *dp)
 		for (i = 0; i < ARRAY_SIZE(pci_irq_trans_table); i++) {
 			struct irq_trans *t = &pci_irq_trans_table[i];
 
-			if (!strcmp(model, t->name))
-				return t->init(dp);
+			if (!strcmp(model, t->name)) {
+				t->init(dp);
+				return;
+			}
 		}
 	}
 #endif
 #ifdef CONFIG_SBUS
 	if (!strcmp(dp->name, "sbus") ||
-	    !strcmp(dp->name, "sbi"))
-		return sbus_irq_trans_init(dp);
+	    !strcmp(dp->name, "sbi")) {
+		sbus_irq_trans_init(dp);
+		return;
+	}
 #endif
 	if (!strcmp(dp->name, "fhc") &&
-	    !strcmp(dp->parent->name, "central"))
-		return central_irq_trans_init(dp);
+	    !strcmp(dp->parent->name, "central")) {
+		central_irq_trans_init(dp);
+		return;
+	}
 	if (!strcmp(dp->name, "virtual-devices") ||
-	    !strcmp(dp->name, "niu"))
-		return sun4v_vdev_irq_trans_init(dp);
+	    !strcmp(dp->name, "niu")) {
+		sun4v_vdev_irq_trans_init(dp);
+		return;
+	}
 }
 
 static int is_root_node(const struct device_node *dp)
@@ -1231,32 +1245,49 @@ static void __init __build_path_component(struct device_node *dp, char *tmp_buf)
 
 	if (parent != NULL) {
 		if (!strcmp(parent->type, "pci") ||
-		    !strcmp(parent->type, "pciex"))
-			return pci_path_component(dp, tmp_buf);
-		if (!strcmp(parent->type, "sbus"))
-			return sbus_path_component(dp, tmp_buf);
-		if (!strcmp(parent->type, "upa"))
-			return upa_path_component(dp, tmp_buf);
-		if (!strcmp(parent->type, "ebus"))
-			return ebus_path_component(dp, tmp_buf);
+		    !strcmp(parent->type, "pciex")) {
+			pci_path_component(dp, tmp_buf);
+			return;
+		}
+		if (!strcmp(parent->type, "sbus")) {
+			sbus_path_component(dp, tmp_buf);
+			return;
+		}
+		if (!strcmp(parent->type, "upa")) {
+			upa_path_component(dp, tmp_buf);
+			return;
+		}
+		if (!strcmp(parent->type, "ebus")) {
+			ebus_path_component(dp, tmp_buf);
+			return;
+		}
 		if (!strcmp(parent->name, "usb") ||
-		    !strcmp(parent->name, "hub"))
-			return usb_path_component(dp, tmp_buf);
-		if (!strcmp(parent->type, "i2c"))
-			return i2c_path_component(dp, tmp_buf);
-		if (!strcmp(parent->type, "firewire"))
-			return ieee1394_path_component(dp, tmp_buf);
-		if (!strcmp(parent->type, "virtual-devices"))
-			return vdev_path_component(dp, tmp_buf);
-
+		    !strcmp(parent->name, "hub")) {
+			usb_path_component(dp, tmp_buf);
+			return;
+		}
+		if (!strcmp(parent->type, "i2c")) {
+			i2c_path_component(dp, tmp_buf);
+			return;
+		}
+		if (!strcmp(parent->type, "firewire")) {
+			ieee1394_path_component(dp, tmp_buf);
+			return;
+		}
+		if (!strcmp(parent->type, "virtual-devices")) {
+			vdev_path_component(dp, tmp_buf);
+			return;
+		}
 		/* "isa" is handled with platform naming */
 	}
 
 	/* Use platform naming convention.  */
-	if (tlb_type == hypervisor)
-		return sun4v_path_component(dp, tmp_buf);
-	else
-		return sun4u_path_component(dp, tmp_buf);
+	if (tlb_type == hypervisor) {
+		sun4v_path_component(dp, tmp_buf);
+		return;
+	} else {
+		sun4u_path_component(dp, tmp_buf);
+	}
 }
 
 static char * __init build_path_component(struct device_node *dp)
diff --git a/arch/sparc64/kernel/psycho_common.c b/arch/sparc64/kernel/psycho_common.c
new file mode 100644
index 0000000..7909964
--- /dev/null
+++ b/arch/sparc64/kernel/psycho_common.c
@@ -0,0 +1,470 @@
+/* psycho_common.c: Code common to PSYCHO and derivative PCI controllers.
+ *
+ * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+
+#include <asm/upa.h>
+
+#include "pci_impl.h"
+#include "iommu_common.h"
+#include "psycho_common.h"
+
+#define  PSYCHO_STRBUF_CTRL_DENAB	0x0000000000000002UL
+#define  PSYCHO_STCERR_WRITE		0x0000000000000002UL
+#define  PSYCHO_STCERR_READ		0x0000000000000001UL
+#define  PSYCHO_STCTAG_PPN		0x0fffffff00000000UL
+#define  PSYCHO_STCTAG_VPN		0x00000000ffffe000UL
+#define  PSYCHO_STCTAG_VALID		0x0000000000000002UL
+#define  PSYCHO_STCTAG_WRITE		0x0000000000000001UL
+#define  PSYCHO_STCLINE_LINDX		0x0000000001e00000UL
+#define  PSYCHO_STCLINE_SPTR		0x00000000001f8000UL
+#define  PSYCHO_STCLINE_LADDR		0x0000000000007f00UL
+#define  PSYCHO_STCLINE_EPTR		0x00000000000000fcUL
+#define  PSYCHO_STCLINE_VALID		0x0000000000000002UL
+#define  PSYCHO_STCLINE_FOFN		0x0000000000000001UL
+
+static DEFINE_SPINLOCK(stc_buf_lock);
+static unsigned long stc_error_buf[128];
+static unsigned long stc_tag_buf[16];
+static unsigned long stc_line_buf[16];
+
+static void psycho_check_stc_error(struct pci_pbm_info *pbm)
+{
+	unsigned long err_base, tag_base, line_base;
+	struct strbuf *strbuf = &pbm->stc;
+	u64 control;
+	int i;
+
+	if (!strbuf->strbuf_control)
+		return;
+
+	err_base = strbuf->strbuf_err_stat;
+	tag_base = strbuf->strbuf_tag_diag;
+	line_base = strbuf->strbuf_line_diag;
+
+	spin_lock(&stc_buf_lock);
+
+	/* This is __REALLY__ dangerous.  When we put the streaming
+	 * buffer into diagnostic mode to probe it's tags and error
+	 * status, we _must_ clear all of the line tag valid bits
+	 * before re-enabling the streaming buffer.  If any dirty data
+	 * lives in the STC when we do this, we will end up
+	 * invalidating it before it has a chance to reach main
+	 * memory.
+	 */
+	control = upa_readq(strbuf->strbuf_control);
+	upa_writeq(control | PSYCHO_STRBUF_CTRL_DENAB, strbuf->strbuf_control);
+	for (i = 0; i < 128; i++) {
+		u64 val;
+
+		val = upa_readq(err_base + (i * 8UL));
+		upa_writeq(0UL, err_base + (i * 8UL));
+		stc_error_buf[i] = val;
+	}
+	for (i = 0; i < 16; i++) {
+		stc_tag_buf[i] = upa_readq(tag_base + (i * 8UL));
+		stc_line_buf[i] = upa_readq(line_base + (i * 8UL));
+		upa_writeq(0UL, tag_base + (i * 8UL));
+		upa_writeq(0UL, line_base + (i * 8UL));
+	}
+
+	/* OK, state is logged, exit diagnostic mode. */
+	upa_writeq(control, strbuf->strbuf_control);
+
+	for (i = 0; i < 16; i++) {
+		int j, saw_error, first, last;
+
+		saw_error = 0;
+		first = i * 8;
+		last = first + 8;
+		for (j = first; j < last; j++) {
+			u64 errval = stc_error_buf[j];
+			if (errval != 0) {
+				saw_error++;
+				printk(KERN_ERR "%s: STC_ERR(%d)[wr(%d)"
+				       "rd(%d)]\n",
+				       pbm->name,
+				       j,
+				       (errval & PSYCHO_STCERR_WRITE) ? 1 : 0,
+				       (errval & PSYCHO_STCERR_READ) ? 1 : 0);
+			}
+		}
+		if (saw_error != 0) {
+			u64 tagval = stc_tag_buf[i];
+			u64 lineval = stc_line_buf[i];
+			printk(KERN_ERR "%s: STC_TAG(%d)[PA(%016lx)VA(%08lx)"
+			       "V(%d)W(%d)]\n",
+			       pbm->name,
+			       i,
+			       ((tagval & PSYCHO_STCTAG_PPN) >> 19UL),
+			       (tagval & PSYCHO_STCTAG_VPN),
+			       ((tagval & PSYCHO_STCTAG_VALID) ? 1 : 0),
+			       ((tagval & PSYCHO_STCTAG_WRITE) ? 1 : 0));
+			printk(KERN_ERR "%s: STC_LINE(%d)[LIDX(%lx)SP(%lx)"
+			       "LADDR(%lx)EP(%lx)V(%d)FOFN(%d)]\n",
+			       pbm->name,
+			       i,
+			       ((lineval & PSYCHO_STCLINE_LINDX) >> 21UL),
+			       ((lineval & PSYCHO_STCLINE_SPTR) >> 15UL),
+			       ((lineval & PSYCHO_STCLINE_LADDR) >> 8UL),
+			       ((lineval & PSYCHO_STCLINE_EPTR) >> 2UL),
+			       ((lineval & PSYCHO_STCLINE_VALID) ? 1 : 0),
+			       ((lineval & PSYCHO_STCLINE_FOFN) ? 1 : 0));
+		}
+	}
+
+	spin_unlock(&stc_buf_lock);
+}
+
+#define PSYCHO_IOMMU_TAG		0xa580UL
+#define PSYCHO_IOMMU_DATA		0xa600UL
+
+static void psycho_record_iommu_tags_and_data(struct pci_pbm_info *pbm,
+					      u64 *tag, u64 *data)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		unsigned long base = pbm->controller_regs;
+		unsigned long off = i * 8UL;
+
+		tag[i] = upa_readq(base + PSYCHO_IOMMU_TAG+off);
+		data[i] = upa_readq(base + PSYCHO_IOMMU_DATA+off);
+
+		/* Now clear out the entry. */
+		upa_writeq(0, base + PSYCHO_IOMMU_TAG + off);
+		upa_writeq(0, base + PSYCHO_IOMMU_DATA + off);
+	}
+}
+
+#define  PSYCHO_IOMMU_TAG_ERRSTS (0x3UL << 23UL)
+#define  PSYCHO_IOMMU_TAG_ERR	 (0x1UL << 22UL)
+#define  PSYCHO_IOMMU_TAG_WRITE	 (0x1UL << 21UL)
+#define  PSYCHO_IOMMU_TAG_STREAM (0x1UL << 20UL)
+#define  PSYCHO_IOMMU_TAG_SIZE	 (0x1UL << 19UL)
+#define  PSYCHO_IOMMU_TAG_VPAGE	 0x7ffffUL
+#define  PSYCHO_IOMMU_DATA_VALID (1UL << 30UL)
+#define  PSYCHO_IOMMU_DATA_CACHE (1UL << 28UL)
+#define  PSYCHO_IOMMU_DATA_PPAGE 0xfffffffUL
+
+static void psycho_dump_iommu_tags_and_data(struct pci_pbm_info *pbm,
+					    u64 *tag, u64 *data)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		u64 tag_val, data_val;
+		const char *type_str;
+		tag_val = tag[i];
+		if (!(tag_val & PSYCHO_IOMMU_TAG_ERR))
+			continue;
+
+		data_val = data[i];
+		switch((tag_val & PSYCHO_IOMMU_TAG_ERRSTS) >> 23UL) {
+		case 0:
+			type_str = "Protection Error";
+			break;
+		case 1:
+			type_str = "Invalid Error";
+			break;
+		case 2:
+			type_str = "TimeOut Error";
+			break;
+		case 3:
+		default:
+			type_str = "ECC Error";
+			break;
+		}
+
+		printk(KERN_ERR "%s: IOMMU TAG(%d)[error(%s) wr(%d) "
+		       "str(%d) sz(%dK) vpg(%08lx)]\n",
+		       pbm->name, i, type_str,
+		       ((tag_val & PSYCHO_IOMMU_TAG_WRITE) ? 1 : 0),
+		       ((tag_val & PSYCHO_IOMMU_TAG_STREAM) ? 1 : 0),
+		       ((tag_val & PSYCHO_IOMMU_TAG_SIZE) ? 64 : 8),
+		       (tag_val & PSYCHO_IOMMU_TAG_VPAGE) << IOMMU_PAGE_SHIFT);
+		printk(KERN_ERR "%s: IOMMU DATA(%d)[valid(%d) cache(%d) "
+		       "ppg(%016lx)]\n",
+		       pbm->name, i,
+		       ((data_val & PSYCHO_IOMMU_DATA_VALID) ? 1 : 0),
+		       ((data_val & PSYCHO_IOMMU_DATA_CACHE) ? 1 : 0),
+		       (data_val & PSYCHO_IOMMU_DATA_PPAGE)<<IOMMU_PAGE_SHIFT);
+	}
+}
+
+#define  PSYCHO_IOMMU_CTRL_XLTESTAT	0x0000000006000000UL
+#define  PSYCHO_IOMMU_CTRL_XLTEERR	0x0000000001000000UL
+
+void psycho_check_iommu_error(struct pci_pbm_info *pbm,
+			      unsigned long afsr,
+			      unsigned long afar,
+			      enum psycho_error_type type)
+{
+	u64 control, iommu_tag[16], iommu_data[16];
+	struct iommu *iommu = pbm->iommu;
+	unsigned long flags;
+
+	spin_lock_irqsave(&iommu->lock, flags);
+	control = upa_readq(iommu->iommu_control);
+	if (control & PSYCHO_IOMMU_CTRL_XLTEERR) {
+		const char *type_str;
+
+		control &= ~PSYCHO_IOMMU_CTRL_XLTEERR;
+		upa_writeq(control, iommu->iommu_control);
+
+		switch ((control & PSYCHO_IOMMU_CTRL_XLTESTAT) >> 25UL) {
+		case 0:
+			type_str = "Protection Error";
+			break;
+		case 1:
+			type_str = "Invalid Error";
+			break;
+		case 2:
+			type_str = "TimeOut Error";
+			break;
+		case 3:
+		default:
+			type_str = "ECC Error";
+			break;
+		};
+		printk(KERN_ERR "%s: IOMMU Error, type[%s]\n",
+		       pbm->name, type_str);
+
+		/* It is very possible for another DVMA to occur while
+		 * we do this probe, and corrupt the system further.
+		 * But we are so screwed at this point that we are
+		 * likely to crash hard anyways, so get as much
+		 * diagnostic information to the console as we can.
+		 */
+		psycho_record_iommu_tags_and_data(pbm, iommu_tag, iommu_data);
+		psycho_dump_iommu_tags_and_data(pbm, iommu_tag, iommu_data);
+	}
+	psycho_check_stc_error(pbm);
+	spin_unlock_irqrestore(&iommu->lock, flags);
+}
+
+#define  PSYCHO_PCICTRL_SBH_ERR	 0x0000000800000000UL
+#define  PSYCHO_PCICTRL_SERR	 0x0000000400000000UL
+
+static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm)
+{
+	irqreturn_t ret = IRQ_NONE;
+	u64 csr, csr_error_bits;
+	u16 stat, *addr;
+
+	csr = upa_readq(pbm->pci_csr);
+	csr_error_bits = csr & (PSYCHO_PCICTRL_SBH_ERR | PSYCHO_PCICTRL_SERR);
+	if (csr_error_bits) {
+		/* Clear the errors.  */
+		upa_writeq(csr, pbm->pci_csr);
+
+		/* Log 'em.  */
+		if (csr_error_bits & PSYCHO_PCICTRL_SBH_ERR)
+			printk(KERN_ERR "%s: PCI streaming byte hole "
+			       "error asserted.\n", pbm->name);
+		if (csr_error_bits & PSYCHO_PCICTRL_SERR)
+			printk(KERN_ERR "%s: PCI SERR signal asserted.\n",
+			       pbm->name);
+		ret = IRQ_HANDLED;
+	}
+	addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
+					0, PCI_STATUS);
+	pci_config_read16(addr, &stat);
+	if (stat & (PCI_STATUS_PARITY |
+		    PCI_STATUS_SIG_TARGET_ABORT |
+		    PCI_STATUS_REC_TARGET_ABORT |
+		    PCI_STATUS_REC_MASTER_ABORT |
+		    PCI_STATUS_SIG_SYSTEM_ERROR)) {
+		printk(KERN_ERR "%s: PCI bus error, PCI_STATUS[%04x]\n",
+		       pbm->name, stat);
+		pci_config_write16(addr, 0xffff);
+		ret = IRQ_HANDLED;
+	}
+	return ret;
+}
+
+#define  PSYCHO_PCIAFSR_PMA	0x8000000000000000UL
+#define  PSYCHO_PCIAFSR_PTA	0x4000000000000000UL
+#define  PSYCHO_PCIAFSR_PRTRY	0x2000000000000000UL
+#define  PSYCHO_PCIAFSR_PPERR	0x1000000000000000UL
+#define  PSYCHO_PCIAFSR_SMA	0x0800000000000000UL
+#define  PSYCHO_PCIAFSR_STA	0x0400000000000000UL
+#define  PSYCHO_PCIAFSR_SRTRY	0x0200000000000000UL
+#define  PSYCHO_PCIAFSR_SPERR	0x0100000000000000UL
+#define  PSYCHO_PCIAFSR_RESV1	0x00ff000000000000UL
+#define  PSYCHO_PCIAFSR_BMSK	0x0000ffff00000000UL
+#define  PSYCHO_PCIAFSR_BLK	0x0000000080000000UL
+#define  PSYCHO_PCIAFSR_RESV2	0x0000000040000000UL
+#define  PSYCHO_PCIAFSR_MID	0x000000003e000000UL
+#define  PSYCHO_PCIAFSR_RESV3	0x0000000001ffffffUL
+
+irqreturn_t psycho_pcierr_intr(int irq, void *dev_id)
+{
+	struct pci_pbm_info *pbm = dev_id;
+	u64 afsr, afar, error_bits;
+	int reported;
+
+	afsr = upa_readq(pbm->pci_afsr);
+	afar = upa_readq(pbm->pci_afar);
+	error_bits = afsr &
+		(PSYCHO_PCIAFSR_PMA | PSYCHO_PCIAFSR_PTA |
+		 PSYCHO_PCIAFSR_PRTRY | PSYCHO_PCIAFSR_PPERR |
+		 PSYCHO_PCIAFSR_SMA | PSYCHO_PCIAFSR_STA |
+		 PSYCHO_PCIAFSR_SRTRY | PSYCHO_PCIAFSR_SPERR);
+	if (!error_bits)
+		return psycho_pcierr_intr_other(pbm);
+	upa_writeq(error_bits, pbm->pci_afsr);
+	printk(KERN_ERR "%s: PCI Error, primary error type[%s]\n",
+	       pbm->name,
+	       (((error_bits & PSYCHO_PCIAFSR_PMA) ?
+		 "Master Abort" :
+		 ((error_bits & PSYCHO_PCIAFSR_PTA) ?
+		  "Target Abort" :
+		  ((error_bits & PSYCHO_PCIAFSR_PRTRY) ?
+		   "Excessive Retries" :
+		   ((error_bits & PSYCHO_PCIAFSR_PPERR) ?
+		    "Parity Error" : "???"))))));
+	printk(KERN_ERR "%s: bytemask[%04lx] UPA_MID[%02lx] was_block(%d)\n",
+	       pbm->name,
+	       (afsr & PSYCHO_PCIAFSR_BMSK) >> 32UL,
+	       (afsr & PSYCHO_PCIAFSR_MID) >> 25UL,
+	       (afsr & PSYCHO_PCIAFSR_BLK) ? 1 : 0);
+	printk(KERN_ERR "%s: PCI AFAR [%016lx]\n", pbm->name, afar);
+	printk(KERN_ERR "%s: PCI Secondary errors [", pbm->name);
+	reported = 0;
+	if (afsr & PSYCHO_PCIAFSR_SMA) {
+		reported++;
+		printk("(Master Abort)");
+	}
+	if (afsr & PSYCHO_PCIAFSR_STA) {
+		reported++;
+		printk("(Target Abort)");
+	}
+	if (afsr & PSYCHO_PCIAFSR_SRTRY) {
+		reported++;
+		printk("(Excessive Retries)");
+	}
+	if (afsr & PSYCHO_PCIAFSR_SPERR) {
+		reported++;
+		printk("(Parity Error)");
+	}
+	if (!reported)
+		printk("(none)");
+	printk("]\n");
+
+	if (error_bits & (PSYCHO_PCIAFSR_PTA | PSYCHO_PCIAFSR_STA)) {
+		psycho_check_iommu_error(pbm, afsr, afar, PCI_ERR);
+		pci_scan_for_target_abort(pbm, pbm->pci_bus);
+	}
+	if (error_bits & (PSYCHO_PCIAFSR_PMA | PSYCHO_PCIAFSR_SMA))
+		pci_scan_for_master_abort(pbm, pbm->pci_bus);
+
+	if (error_bits & (PSYCHO_PCIAFSR_PPERR | PSYCHO_PCIAFSR_SPERR))
+		pci_scan_for_parity_error(pbm, pbm->pci_bus);
+
+	return IRQ_HANDLED;
+}
+
+static void psycho_iommu_flush(struct pci_pbm_info *pbm)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		unsigned long off = i * 8;
+
+		upa_writeq(0, pbm->controller_regs + PSYCHO_IOMMU_TAG + off);
+		upa_writeq(0, pbm->controller_regs + PSYCHO_IOMMU_DATA + off);
+	}
+}
+
+#define PSYCHO_IOMMU_CONTROL		0x0200UL
+#define  PSYCHO_IOMMU_CTRL_TSBSZ	0x0000000000070000UL
+#define  PSYCHO_IOMMU_TSBSZ_1K      	0x0000000000000000UL
+#define  PSYCHO_IOMMU_TSBSZ_2K      	0x0000000000010000UL
+#define  PSYCHO_IOMMU_TSBSZ_4K      	0x0000000000020000UL
+#define  PSYCHO_IOMMU_TSBSZ_8K      	0x0000000000030000UL
+#define  PSYCHO_IOMMU_TSBSZ_16K     	0x0000000000040000UL
+#define  PSYCHO_IOMMU_TSBSZ_32K     	0x0000000000050000UL
+#define  PSYCHO_IOMMU_TSBSZ_64K     	0x0000000000060000UL
+#define  PSYCHO_IOMMU_TSBSZ_128K    	0x0000000000070000UL
+#define  PSYCHO_IOMMU_CTRL_TBWSZ    	0x0000000000000004UL
+#define  PSYCHO_IOMMU_CTRL_DENAB    	0x0000000000000002UL
+#define  PSYCHO_IOMMU_CTRL_ENAB     	0x0000000000000001UL
+#define PSYCHO_IOMMU_FLUSH		0x0210UL
+#define PSYCHO_IOMMU_TSBBASE		0x0208UL
+
+int psycho_iommu_init(struct pci_pbm_info *pbm, int tsbsize,
+		      u32 dvma_offset, u32 dma_mask,
+		      unsigned long write_complete_offset)
+{
+	struct iommu *iommu = pbm->iommu;
+	u64 control;
+	int err;
+
+	iommu->iommu_control  = pbm->controller_regs + PSYCHO_IOMMU_CONTROL;
+	iommu->iommu_tsbbase  = pbm->controller_regs + PSYCHO_IOMMU_TSBBASE;
+	iommu->iommu_flush    = pbm->controller_regs + PSYCHO_IOMMU_FLUSH;
+	iommu->iommu_tags     = pbm->controller_regs + PSYCHO_IOMMU_TAG;
+	iommu->write_complete_reg = (pbm->controller_regs +
+				     write_complete_offset);
+
+	iommu->iommu_ctxflush = 0;
+
+	control = upa_readq(iommu->iommu_control);
+	control |= PSYCHO_IOMMU_CTRL_DENAB;
+	upa_writeq(control, iommu->iommu_control);
+
+	psycho_iommu_flush(pbm);
+
+	/* Leave diag mode enabled for full-flushing done in pci_iommu.c */
+	err = iommu_table_init(iommu, tsbsize * 1024 * 8,
+			       dvma_offset, dma_mask, pbm->numa_node);
+	if (err)
+		return err;
+
+	upa_writeq(__pa(iommu->page_table), iommu->iommu_tsbbase);
+
+	control = upa_readq(iommu->iommu_control);
+	control &= ~(PSYCHO_IOMMU_CTRL_TSBSZ | PSYCHO_IOMMU_CTRL_TBWSZ);
+	control |= PSYCHO_IOMMU_CTRL_ENAB;
+
+	switch (tsbsize) {
+	case 64:
+		control |= PSYCHO_IOMMU_TSBSZ_64K;
+		break;
+	case 128:
+		control |= PSYCHO_IOMMU_TSBSZ_128K;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	upa_writeq(control, iommu->iommu_control);
+
+	return 0;
+
+}
+
+void psycho_pbm_init_common(struct pci_pbm_info *pbm, struct of_device *op,
+			    const char *chip_name, int chip_type)
+{
+	struct device_node *dp = op->node;
+
+	pbm->name = dp->full_name;
+	pbm->numa_node = -1;
+	pbm->chip_type = chip_type;
+	pbm->chip_version = of_getintprop_default(dp, "version#", 0);
+	pbm->chip_revision = of_getintprop_default(dp, "module-revision#", 0);
+	pbm->op = op;
+	pbm->pci_ops = &sun4u_pci_ops;
+	pbm->config_space_reg_bits = 8;
+	pbm->index = pci_num_pbms++;
+	pci_get_pbm_props(pbm);
+	pci_determine_mem_io_space(pbm);
+
+	printk(KERN_INFO "%s: %s PCI Bus Module ver[%x:%x]\n",
+	       pbm->name, chip_name,
+	       pbm->chip_version, pbm->chip_revision);
+}
diff --git a/arch/sparc64/kernel/psycho_common.h b/arch/sparc64/kernel/psycho_common.h
new file mode 100644
index 0000000..092c278
--- /dev/null
+++ b/arch/sparc64/kernel/psycho_common.h
@@ -0,0 +1,48 @@
+#ifndef _PSYCHO_COMMON_H
+#define _PSYCHO_COMMON_H
+
+/* U2P Programmer's Manual, page 13-55, configuration space
+ * address format:
+ * 
+ *  32             24 23 16 15    11 10       8 7   2  1 0
+ * ---------------------------------------------------------
+ * |0 0 0 0 0 0 0 0 1| bus | device | function | reg | 0 0 |
+ * ---------------------------------------------------------
+ */
+#define PSYCHO_CONFIG_BASE(PBM)	\
+	((PBM)->config_space | (1UL << 24))
+#define PSYCHO_CONFIG_ENCODE(BUS, DEVFN, REG)	\
+	(((unsigned long)(BUS)   << 16) |	\
+	 ((unsigned long)(DEVFN) << 8)  |	\
+	 ((unsigned long)(REG)))
+
+static inline void *psycho_pci_config_mkaddr(struct pci_pbm_info *pbm,
+					     unsigned char bus,
+					     unsigned int devfn,
+					     int where)
+{
+	return (void *)
+		(PSYCHO_CONFIG_BASE(pbm) |
+		 PSYCHO_CONFIG_ENCODE(bus, devfn, where));
+}
+
+enum psycho_error_type {
+	UE_ERR, CE_ERR, PCI_ERR
+};
+
+extern void psycho_check_iommu_error(struct pci_pbm_info *pbm,
+				     unsigned long afsr,
+				     unsigned long afar,
+				     enum psycho_error_type type);
+
+extern irqreturn_t psycho_pcierr_intr(int irq, void *dev_id);
+
+extern int psycho_iommu_init(struct pci_pbm_info *pbm, int tsbsize,
+			     u32 dvma_offset, u32 dma_mask,
+			     unsigned long write_complete_offset);
+
+extern void psycho_pbm_init_common(struct pci_pbm_info *pbm,
+				   struct of_device *op,
+				   const char *chip_name, int chip_type);
+
+#endif /* _PSYCHO_COMMON_H */
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index 10306e4..f43adbc 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -1050,31 +1050,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 {
 	int ret = 0;
 
 	/* do the secure computing check first */
 	secure_computing(regs->u_regs[UREG_G1]);
 
-	if (unlikely(current->audit_context) && syscall_exit_p) {
-		unsigned long tstate = regs->tstate;
-		int result = AUDITSC_SUCCESS;
-
-		if (unlikely(tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
-			result = AUDITSC_FAILURE;
-
-		audit_syscall_exit(result, regs->u_regs[UREG_I0]);
-	}
-
-	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
-		if (syscall_exit_p)
-			tracehook_report_syscall_exit(regs, 0);
-		else
-			ret = tracehook_report_syscall_entry(regs);
-	}
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ret = tracehook_report_syscall_entry(regs);
 
-	if (unlikely(current->audit_context) && !syscall_exit_p && !ret)
+	if (unlikely(current->audit_context) && !ret)
 		audit_syscall_entry((test_thread_flag(TIF_32BIT) ?
 				     AUDIT_ARCH_SPARC :
 				     AUDIT_ARCH_SPARC64),
@@ -1086,3 +1072,19 @@ asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 
 	return ret;
 }
+
+asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+{
+	if (unlikely(current->audit_context)) {
+		unsigned long tstate = regs->tstate;
+		int result = AUDITSC_SUCCESS;
+
+		if (unlikely(tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
+			result = AUDITSC_FAILURE;
+
+		audit_syscall_exit(result, regs->u_regs[UREG_I0]);
+	}
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, 0);
+}
diff --git a/arch/sparc64/kernel/reboot.c b/arch/sparc64/kernel/reboot.c
new file mode 100644
index 0000000..ef89d3d
--- /dev/null
+++ b/arch/sparc64/kernel/reboot.c
@@ -0,0 +1,53 @@
+/* reboot.c: reboot/shutdown/halt/poweroff handling
+ *
+ * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
+ */
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <asm/system.h>
+#include <asm/oplib.h>
+#include <asm/prom.h>
+
+/* sysctl - toggle power-off restriction for serial console
+ * systems in machine_power_off()
+ */
+int scons_pwroff = 1;
+
+/* This isn't actually used, it exists merely to satisfy the
+ * reference in kernel/sys.c
+ */
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
+
+void machine_power_off(void)
+{
+	if (strcmp(of_console_device->type, "serial") || scons_pwroff)
+		prom_halt_power_off();
+
+	prom_halt();
+}
+
+void machine_halt(void)
+{
+	prom_halt();
+	panic("Halt failed!");
+}
+
+void machine_restart(char *cmd)
+{
+	char *p;
+
+	p = strchr(reboot_command, '\n');
+	if (p)
+		*p = 0;
+	if (cmd)
+		prom_reboot(cmd);
+	if (*reboot_command)
+		prom_reboot(reboot_command);
+	prom_reboot("");
+	panic("Reboot failed!");
+}
+
diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c
index e33a8a6..2ead310 100644
--- a/arch/sparc64/kernel/sbus.c
+++ b/arch/sparc64/kernel/sbus.c
@@ -11,15 +11,17 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/page.h>
-#include <asm/sbus.h>
 #include <asm/io.h>
 #include <asm/upa.h>
 #include <asm/cache.h>
 #include <asm/dma.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
+#include <asm/oplib.h>
 #include <asm/starfire.h>
 
 #include "iommu_common.h"
@@ -52,13 +54,23 @@
 #define STRBUF_TAG_VALID	0x02UL
 
 /* Enable 64-bit DVMA mode for the given device. */
-void sbus_set_sbus64(struct sbus_dev *sdev, int bursts)
+void sbus_set_sbus64(struct device *dev, int bursts)
 {
-	struct iommu *iommu = sdev->ofdev.dev.archdata.iommu;
-	int slot = sdev->slot;
+	struct iommu *iommu = dev->archdata.iommu;
+	struct of_device *op = to_of_device(dev);
+	const struct linux_prom_registers *regs;
 	unsigned long cfg_reg;
+	int slot;
 	u64 val;
 
+	regs = of_get_property(op->node, "reg", NULL);
+	if (!regs) {
+		printk(KERN_ERR "sbus_set_sbus64: Cannot find regs for %s\n",
+		       op->node->full_name);
+		return;
+	}
+	slot = regs->which_io;
+
 	cfg_reg = iommu->write_complete_reg;
 	switch (slot) {
 	case 0:
@@ -191,10 +203,9 @@ static unsigned long sysio_imap_to_iclr(unsigned long imap)
 	return imap + diff;
 }
 
-unsigned int sbus_build_irq(void *buscookie, unsigned int ino)
+static unsigned int sbus_build_irq(struct of_device *op, unsigned int ino)
 {
-	struct sbus_bus *sbus = (struct sbus_bus *)buscookie;
-	struct iommu *iommu = sbus->ofdev.dev.archdata.iommu;
+	struct iommu *iommu = op->dev.archdata.iommu;
 	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
 	unsigned long imap, iclr;
 	int sbus_level = 0;
@@ -255,12 +266,12 @@ unsigned int sbus_build_irq(void *buscookie, unsigned int ino)
 #define  SYSIO_UEAFSR_RESV2 0x0000001fffffffffUL /* Reserved                  */
 static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
 {
-	struct sbus_bus *sbus = dev_id;
-	struct iommu *iommu = sbus->ofdev.dev.archdata.iommu;
+	struct of_device *op = dev_id;
+	struct iommu *iommu = op->dev.archdata.iommu;
 	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
 	unsigned long afsr_reg, afar_reg;
 	unsigned long afsr, afar, error_bits;
-	int reported;
+	int reported, portid;
 
 	afsr_reg = reg_base + SYSIO_UE_AFSR;
 	afar_reg = reg_base + SYSIO_UE_AFAR;
@@ -275,9 +286,11 @@ static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
 		 SYSIO_UEAFSR_SPIO | SYSIO_UEAFSR_SDRD | SYSIO_UEAFSR_SDWR);
 	upa_writeq(error_bits, afsr_reg);
 
+	portid = of_getintprop_default(op->node, "portid", -1);
+
 	/* Log the error. */
 	printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n",
-	       sbus->portid,
+	       portid,
 	       (((error_bits & SYSIO_UEAFSR_PPIO) ?
 		 "PIO" :
 		 ((error_bits & SYSIO_UEAFSR_PDRD) ?
@@ -285,12 +298,12 @@ static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
 		  ((error_bits & SYSIO_UEAFSR_PDWR) ?
 		   "DVMA Write" : "???")))));
 	printk("SYSIO[%x]: DOFF[%lx] SIZE[%lx] MID[%lx]\n",
-	       sbus->portid,
+	       portid,
 	       (afsr & SYSIO_UEAFSR_DOFF) >> 45UL,
 	       (afsr & SYSIO_UEAFSR_SIZE) >> 42UL,
 	       (afsr & SYSIO_UEAFSR_MID) >> 37UL);
-	printk("SYSIO[%x]: AFAR[%016lx]\n", sbus->portid, afar);
-	printk("SYSIO[%x]: Secondary UE errors [", sbus->portid);
+	printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
+	printk("SYSIO[%x]: Secondary UE errors [", portid);
 	reported = 0;
 	if (afsr & SYSIO_UEAFSR_SPIO) {
 		reported++;
@@ -327,12 +340,12 @@ static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
 #define  SYSIO_CEAFSR_RESV2 0x0000001fffffffffUL /* Reserved                  */
 static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
 {
-	struct sbus_bus *sbus = dev_id;
-	struct iommu *iommu = sbus->ofdev.dev.archdata.iommu;
+	struct of_device *op = dev_id;
+	struct iommu *iommu = op->dev.archdata.iommu;
 	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
 	unsigned long afsr_reg, afar_reg;
 	unsigned long afsr, afar, error_bits;
-	int reported;
+	int reported, portid;
 
 	afsr_reg = reg_base + SYSIO_CE_AFSR;
 	afar_reg = reg_base + SYSIO_CE_AFAR;
@@ -347,8 +360,10 @@ static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
 		 SYSIO_CEAFSR_SPIO | SYSIO_CEAFSR_SDRD | SYSIO_CEAFSR_SDWR);
 	upa_writeq(error_bits, afsr_reg);
 
+	portid = of_getintprop_default(op->node, "portid", -1);
+
 	printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n",
-	       sbus->portid,
+	       portid,
 	       (((error_bits & SYSIO_CEAFSR_PPIO) ?
 		 "PIO" :
 		 ((error_bits & SYSIO_CEAFSR_PDRD) ?
@@ -360,14 +375,14 @@ static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
 	 * XXX UDB CE trap handler does... -DaveM
 	 */
 	printk("SYSIO[%x]: DOFF[%lx] ECC Syndrome[%lx] Size[%lx] MID[%lx]\n",
-	       sbus->portid,
+	       portid,
 	       (afsr & SYSIO_CEAFSR_DOFF) >> 45UL,
 	       (afsr & SYSIO_CEAFSR_ESYND) >> 48UL,
 	       (afsr & SYSIO_CEAFSR_SIZE) >> 42UL,
 	       (afsr & SYSIO_CEAFSR_MID) >> 37UL);
-	printk("SYSIO[%x]: AFAR[%016lx]\n", sbus->portid, afar);
+	printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
 
-	printk("SYSIO[%x]: Secondary CE errors [", sbus->portid);
+	printk("SYSIO[%x]: Secondary CE errors [", portid);
 	reported = 0;
 	if (afsr & SYSIO_CEAFSR_SPIO) {
 		reported++;
@@ -404,11 +419,11 @@ static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
 #define  SYSIO_SBAFSR_RESV3 0x0000001fffffffffUL /* Reserved                  */
 static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
 {
-	struct sbus_bus *sbus = dev_id;
-	struct iommu *iommu = sbus->ofdev.dev.archdata.iommu;
+	struct of_device *op = dev_id;
+	struct iommu *iommu = op->dev.archdata.iommu;
 	unsigned long afsr_reg, afar_reg, reg_base;
 	unsigned long afsr, afar, error_bits;
-	int reported;
+	int reported, portid;
 
 	reg_base = iommu->write_complete_reg - 0x2000UL;
 	afsr_reg = reg_base + SYSIO_SBUS_AFSR;
@@ -423,9 +438,11 @@ static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
 		 SYSIO_SBAFSR_SLE | SYSIO_SBAFSR_STO | SYSIO_SBAFSR_SBERR);
 	upa_writeq(error_bits, afsr_reg);
 
+	portid = of_getintprop_default(op->node, "portid", -1);
+
 	/* Log the error. */
 	printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n",
-	       sbus->portid,
+	       portid,
 	       (((error_bits & SYSIO_SBAFSR_PLE) ?
 		 "Late PIO Error" :
 		 ((error_bits & SYSIO_SBAFSR_PTO) ?
@@ -434,11 +451,11 @@ static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
 		   "Error Ack" : "???")))),
 	       (afsr & SYSIO_SBAFSR_RD) ? 1 : 0);
 	printk("SYSIO[%x]: size[%lx] MID[%lx]\n",
-	       sbus->portid,
+	       portid,
 	       (afsr & SYSIO_SBAFSR_SIZE) >> 42UL,
 	       (afsr & SYSIO_SBAFSR_MID) >> 37UL);
-	printk("SYSIO[%x]: AFAR[%016lx]\n", sbus->portid, afar);
-	printk("SYSIO[%x]: Secondary SBUS errors [", sbus->portid);
+	printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
+	printk("SYSIO[%x]: Secondary SBUS errors [", portid);
 	reported = 0;
 	if (afsr & SYSIO_SBAFSR_SLE) {
 		reported++;
@@ -470,34 +487,37 @@ static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
 #define SYSIO_CE_INO		0x35
 #define SYSIO_SBUSERR_INO	0x36
 
-static void __init sysio_register_error_handlers(struct sbus_bus *sbus)
+static void __init sysio_register_error_handlers(struct of_device *op)
 {
-	struct iommu *iommu = sbus->ofdev.dev.archdata.iommu;
+	struct iommu *iommu = op->dev.archdata.iommu;
 	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
 	unsigned int irq;
 	u64 control;
+	int portid;
+
+	portid = of_getintprop_default(op->node, "portid", -1);
 
-	irq = sbus_build_irq(sbus, SYSIO_UE_INO);
+	irq = sbus_build_irq(op, SYSIO_UE_INO);
 	if (request_irq(irq, sysio_ue_handler, 0,
-			"SYSIO_UE", sbus) < 0) {
+			"SYSIO_UE", op) < 0) {
 		prom_printf("SYSIO[%x]: Cannot register UE interrupt.\n",
-			    sbus->portid);
+			    portid);
 		prom_halt();
 	}
 
-	irq = sbus_build_irq(sbus, SYSIO_CE_INO);
+	irq = sbus_build_irq(op, SYSIO_CE_INO);
 	if (request_irq(irq, sysio_ce_handler, 0,
-			"SYSIO_CE", sbus) < 0) {
+			"SYSIO_CE", op) < 0) {
 		prom_printf("SYSIO[%x]: Cannot register CE interrupt.\n",
-			    sbus->portid);
+			    portid);
 		prom_halt();
 	}
 
-	irq = sbus_build_irq(sbus, SYSIO_SBUSERR_INO);
+	irq = sbus_build_irq(op, SYSIO_SBUSERR_INO);
 	if (request_irq(irq, sysio_sbus_error_handler, 0,
-			"SYSIO_SBERR", sbus) < 0) {
+			"SYSIO_SBERR", op) < 0) {
 		prom_printf("SYSIO[%x]: Cannot register SBUS Error interrupt.\n",
-			    sbus->portid);
+			    portid);
 		prom_halt();
 	}
 
@@ -513,19 +533,15 @@ static void __init sysio_register_error_handlers(struct sbus_bus *sbus)
 }
 
 /* Boot time initialization. */
-static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus)
+static void __init sbus_iommu_init(struct of_device *op)
 {
 	const struct linux_prom64_registers *pr;
-	struct device_node *dp;
+	struct device_node *dp = op->node;
 	struct iommu *iommu;
 	struct strbuf *strbuf;
 	unsigned long regs, reg_base;
+	int i, portid;
 	u64 control;
-	int i;
-
-	dp = of_find_node_by_phandle(__node);
-
-	sbus->portid = of_getintprop_default(dp, "upa-portid", -1);
 
 	pr = of_get_property(dp, "reg", NULL);
 	if (!pr) {
@@ -542,9 +558,9 @@ static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus)
 	if (!strbuf)
 		goto fatal_memory_error;
 
-	sbus->ofdev.dev.archdata.iommu = iommu;
-	sbus->ofdev.dev.archdata.stc = strbuf;
-	sbus->ofdev.dev.archdata.numa_node = -1;
+	op->dev.archdata.iommu = iommu;
+	op->dev.archdata.stc = strbuf;
+	op->dev.archdata.numa_node = -1;
 
 	reg_base = regs + SYSIO_IOMMUREG_BASE;
 	iommu->iommu_control = reg_base + IOMMU_CONTROL;
@@ -572,8 +588,9 @@ static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus)
 	 */
 	iommu->write_complete_reg = regs + 0x2000UL;
 
-	printk("SYSIO: UPA portID %x, at %016lx\n",
-	       sbus->portid, regs);
+	portid = of_getintprop_default(op->node, "portid", -1);
+	printk(KERN_INFO "SYSIO: UPA portID %x, at %016lx\n",
+	       portid, regs);
 
 	/* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */
 	if (iommu_table_init(iommu, IO_TSB_SIZE, MAP_BASE, 0xffffffff, -1))
@@ -631,56 +648,27 @@ static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus)
 
 	/* Now some Xfire specific grot... */
 	if (this_is_starfire)
-		starfire_hookup(sbus->portid);
+		starfire_hookup(portid);
 
-	sysio_register_error_handlers(sbus);
+	sysio_register_error_handlers(op);
 	return;
 
 fatal_memory_error:
 	prom_printf("sbus_iommu_init: Fatal memory allocation error.\n");
 }
 
-void sbus_fill_device_irq(struct sbus_dev *sdev)
+static int __init sbus_init(void)
 {
-	struct device_node *dp = of_find_node_by_phandle(sdev->prom_node);
-	const struct linux_prom_irqs *irqs;
-
-	irqs = of_get_property(dp, "interrupts", NULL);
-	if (!irqs) {
-		sdev->irqs[0] = 0;
-		sdev->num_irqs = 0;
-	} else {
-		unsigned int pri = irqs[0].pri;
+	struct device_node *dp;
 
-		sdev->num_irqs = 1;
-		if (pri < 0x20)
-			pri += sdev->slot * 8;
+	for_each_node_by_name(dp, "sbus") {
+		struct of_device *op = of_find_device_by_node(dp);
 
-		sdev->irqs[0] =	sbus_build_irq(sdev->bus, pri);
+		sbus_iommu_init(op);
+		of_propagate_archdata(op);
 	}
-}
 
-void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus)
-{
-}
-
-void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp)
-{
-	sbus_iommu_init(dp->node, sbus);
-}
-
-void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp)
-{
-}
-
-int __init sbus_arch_preinit(void)
-{
 	return 0;
 }
 
-void __init sbus_arch_postinit(void)
-{
-	extern void firetruck_init(void);
-
-	firetruck_init();
-}
+subsys_initcall(sbus_init);
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 2be166c..e562711 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -21,6 +21,7 @@
 #include <linux/jiffies.h>
 #include <linux/profile.h>
 #include <linux/lmb.h>
+#include <linux/cpu.h>
 
 #include <asm/head.h>
 #include <asm/ptrace.h>
@@ -115,6 +116,9 @@ void __cpuinit smp_callin(void)
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
 
+	/* inform the notifiers about the new cpu */
+	notify_cpu_starting(cpuid);
+
 	while (!cpu_isset(cpuid, smp_commenced_mask))
 		rmb();
 
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 0804f71..30bba8b 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -36,7 +36,6 @@
 #include <asm/elf.h>
 #include <asm/head.h>
 #include <asm/smp.h>
-#include <asm/mostek.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
@@ -44,12 +43,8 @@
 #include <asm/pgalloc.h>
 #include <asm/cacheflush.h>
 #ifdef CONFIG_SBUS
-#include <asm/sbus.h>
 #include <asm/dma.h>
 #endif
-#ifdef CONFIG_PCI
-#include <asm/ebus.h>
-#endif
 #include <asm/ns87303.h>
 #include <asm/timer.h>
 #include <asm/cpudata.h>
@@ -68,7 +63,6 @@ extern void *__memscan_zero(void *, size_t);
 extern void *__memscan_generic(void *, int, size_t);
 extern int __memcmp(const void *, const void *, __kernel_size_t);
 extern __kernel_size_t strlen(const char *);
-extern void syscall_trace(struct pt_regs *, int);
 extern void sys_sigsuspend(void);
 extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg);
 extern int (*handle_mathemu)(struct pt_regs *, struct fpustate *);
@@ -154,26 +148,12 @@ EXPORT_SYMBOL(flush_dcache_page);
 EXPORT_SYMBOL(__flush_dcache_range);
 #endif
 
-EXPORT_SYMBOL(mostek_lock);
-EXPORT_SYMBOL(mstk48t02_regs);
 #ifdef CONFIG_SUN_AUXIO
 EXPORT_SYMBOL(auxio_set_led);
 EXPORT_SYMBOL(auxio_set_lte);
 #endif
 #ifdef CONFIG_SBUS
-EXPORT_SYMBOL(sbus_root);
-EXPORT_SYMBOL(dma_chain);
 EXPORT_SYMBOL(sbus_set_sbus64);
-EXPORT_SYMBOL(sbus_alloc_consistent);
-EXPORT_SYMBOL(sbus_free_consistent);
-EXPORT_SYMBOL(sbus_map_single);
-EXPORT_SYMBOL(sbus_unmap_single);
-EXPORT_SYMBOL(sbus_map_sg);
-EXPORT_SYMBOL(sbus_unmap_sg);
-EXPORT_SYMBOL(sbus_dma_sync_single_for_cpu);
-EXPORT_SYMBOL(sbus_dma_sync_single_for_device);
-EXPORT_SYMBOL(sbus_dma_sync_sg_for_cpu);
-EXPORT_SYMBOL(sbus_dma_sync_sg_for_device);
 #endif
 EXPORT_SYMBOL(outsb);
 EXPORT_SYMBOL(outsw);
@@ -182,7 +162,6 @@ EXPORT_SYMBOL(insb);
 EXPORT_SYMBOL(insw);
 EXPORT_SYMBOL(insl);
 #ifdef CONFIG_PCI
-EXPORT_SYMBOL(ebus_chain);
 EXPORT_SYMBOL(pci_alloc_consistent);
 EXPORT_SYMBOL(pci_free_consistent);
 EXPORT_SYMBOL(pci_map_single);
@@ -300,3 +279,5 @@ EXPORT_SYMBOL(xor_niagara_2);
 EXPORT_SYMBOL(xor_niagara_3);
 EXPORT_SYMBOL(xor_niagara_4);
 EXPORT_SYMBOL(xor_niagara_5);
+
+EXPORT_SYMBOL_GPL(real_hard_smp_processor_id);
diff --git a/arch/sparc64/kernel/sstate.c b/arch/sparc64/kernel/sstate.c
index 5b6e75b..8cdbe59 100644
--- a/arch/sparc64/kernel/sstate.c
+++ b/arch/sparc64/kernel/sstate.c
@@ -1,14 +1,15 @@
 /* sstate.c: System soft state support.
  *
- * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2007, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
 #include <linux/notifier.h>
+#include <linux/reboot.h>
 #include <linux/init.h>
 
 #include <asm/hypervisor.h>
-#include <asm/sstate.h>
+#include <asm/spitfire.h>
 #include <asm/oplib.h>
 #include <asm/head.h>
 #include <asm/io.h>
@@ -50,31 +51,34 @@ static const char rebooting_msg[32] __attribute__((aligned(32))) =
 static const char panicing_msg[32] __attribute__((aligned(32))) =
 	"Linux panicing";
 
-void sstate_booting(void)
+static int sstate_reboot_call(struct notifier_block *np, unsigned long type, void *_unused)
 {
-	do_set_sstate(HV_SOFT_STATE_TRANSITION, booting_msg);
-}
+	const char *msg;
 
-void sstate_running(void)
-{
-	do_set_sstate(HV_SOFT_STATE_NORMAL, running_msg);
-}
+	switch (type) {
+	case SYS_DOWN:
+	default:
+		msg = rebooting_msg;
+		break;
 
-void sstate_halt(void)
-{
-	do_set_sstate(HV_SOFT_STATE_TRANSITION, halting_msg);
-}
+	case SYS_HALT:
+		msg = halting_msg;
+		break;
 
-void sstate_poweroff(void)
-{
-	do_set_sstate(HV_SOFT_STATE_TRANSITION, poweroff_msg);
-}
+	case SYS_POWER_OFF:
+		msg = poweroff_msg;
+		break;
+	}
 
-void sstate_reboot(void)
-{
-	do_set_sstate(HV_SOFT_STATE_TRANSITION, rebooting_msg);
+	do_set_sstate(HV_SOFT_STATE_TRANSITION, msg);
+
+	return NOTIFY_OK;
 }
 
+static struct notifier_block sstate_reboot_notifier = {
+	.notifier_call = sstate_reboot_call,
+};
+
 static int sstate_panic_event(struct notifier_block *n, unsigned long event, void *ptr)
 {
 	do_set_sstate(HV_SOFT_STATE_TRANSITION, panicing_msg);
@@ -87,18 +91,37 @@ static struct notifier_block sstate_panic_block = {
 	.priority	=	INT_MAX,
 };
 
-void __init sun4v_sstate_init(void)
+static int __init sstate_init(void)
 {
 	unsigned long major, minor;
 
+	if (tlb_type != hypervisor)
+		return 0;
+
 	major = 1;
 	minor = 0;
 	if (sun4v_hvapi_register(HV_GRP_SOFT_STATE, major, &minor))
-		return;
+		return 0;
 
 	hv_supports_soft_state = 1;
 
 	prom_sun4v_guest_soft_state();
+
+	do_set_sstate(HV_SOFT_STATE_TRANSITION, booting_msg);
+
 	atomic_notifier_chain_register(&panic_notifier_list,
 				       &sstate_panic_block);
+	register_reboot_notifier(&sstate_reboot_notifier);
+
+	return 0;
 }
+
+core_initcall(sstate_init);
+
+static int __init sstate_running(void)
+{
+	do_set_sstate(HV_SOFT_STATE_NORMAL, running_msg);
+	return 0;
+}
+
+late_initcall(sstate_running);
diff --git a/arch/sparc64/kernel/starfire.c b/arch/sparc64/kernel/starfire.c
index 7461581..060d0f3 100644
--- a/arch/sparc64/kernel/starfire.c
+++ b/arch/sparc64/kernel/starfire.c
@@ -28,11 +28,6 @@ void check_if_starfire(void)
 		this_is_starfire = 1;
 }
 
-void starfire_cpu_setup(void)
-{
-	/* Currently, nothing to do.  */
-}
-
 int starfire_hard_smp_processor_id(void)
 {
 	return upa_readl(0x1fff40000d0UL);
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 3d11853..e800503 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -58,15 +58,6 @@
 #include <asm/mmu_context.h>
 #include <asm/compat_signal.h>
 
-/* 32-bit timeval and related flotsam.  */
-
-static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
-{
-	return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
-		(__put_user(i->tv_sec, &o->tv_sec) |
-		 __put_user(i->tv_usec, &o->tv_usec)));
-}
-
 #ifdef CONFIG_SYSVIPC                                                        
 asmlinkage long compat_sys_ipc(u32 call, u32 first, u32 second, u32 third, compat_uptr_t ptr, u32 fifth)
 {
@@ -148,41 +139,6 @@ asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long high, unsigned
 		return sys_ftruncate(fd, (high << 32) | low);
 }
 
-int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
-{
-	compat_ino_t ino;
-	int err;
-
-	if (stat->size > MAX_NON_LFS || !old_valid_dev(stat->dev) ||
-	    !old_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-
-	ino = stat->ino;
-	if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino)
-		return -EOVERFLOW;
-
-	err  = put_user(old_encode_dev(stat->dev), &statbuf->st_dev);
-	err |= put_user(stat->ino, &statbuf->st_ino);
-	err |= put_user(stat->mode, &statbuf->st_mode);
-	err |= put_user(stat->nlink, &statbuf->st_nlink);
-	err |= put_user(high2lowuid(stat->uid), &statbuf->st_uid);
-	err |= put_user(high2lowgid(stat->gid), &statbuf->st_gid);
-	err |= put_user(old_encode_dev(stat->rdev), &statbuf->st_rdev);
-	err |= put_user(stat->size, &statbuf->st_size);
-	err |= put_user(stat->atime.tv_sec, &statbuf->st_atime);
-	err |= put_user(stat->atime.tv_nsec, &statbuf->st_atime_nsec);
-	err |= put_user(stat->mtime.tv_sec, &statbuf->st_mtime);
-	err |= put_user(stat->mtime.tv_nsec, &statbuf->st_mtime_nsec);
-	err |= put_user(stat->ctime.tv_sec, &statbuf->st_ctime);
-	err |= put_user(stat->ctime.tv_nsec, &statbuf->st_ctime_nsec);
-	err |= put_user(stat->blksize, &statbuf->st_blksize);
-	err |= put_user(stat->blocks, &statbuf->st_blocks);
-	err |= put_user(0, &statbuf->__unused4[0]);
-	err |= put_user(0, &statbuf->__unused4[1]);
-
-	return err;
-}
-
 static int cp_compat_stat64(struct kstat *stat,
 			    struct compat_stat64 __user *statbuf)
 {
@@ -522,67 +478,6 @@ asmlinkage long sys32_delete_module(const char __user *name_user)
 
 #endif  /* CONFIG_MODULES */
 
-/* Translations due to time_t size differences.  Which affects all
-   sorts of things, like timeval and itimerval.  */
-
-extern struct timezone sys_tz;
-
-asmlinkage long sys32_gettimeofday(struct compat_timeval __user *tv,
-				   struct timezone __user *tz)
-{
-	if (tv) {
-		struct timeval ktv;
-		do_gettimeofday(&ktv);
-		if (put_tv32(tv, &ktv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
-{
-	long usec;
-
-	if (!access_ok(VERIFY_READ, i, sizeof(*i)))
-		return -EFAULT;
-	if (__get_user(o->tv_sec, &i->tv_sec))
-		return -EFAULT;
-	if (__get_user(usec, &i->tv_usec))
-		return -EFAULT;
-	o->tv_nsec = usec * 1000;
-	return 0;
-}
-
-asmlinkage long sys32_settimeofday(struct compat_timeval __user *tv,
-				   struct timezone __user *tz)
-{
-	struct timespec kts;
-	struct timezone ktz;
-
- 	if (tv) {
-		if (get_ts32(&kts, tv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_from_user(&ktz, tz, sizeof(ktz)))
-			return -EFAULT;
-	}
-
-	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
-}
-
-/* These are here just in case some old sparc32 binary calls it. */
-asmlinkage long sys32_pause(void)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	return -ERESTARTNOHAND;
-}
-
 asmlinkage compat_ssize_t sys32_pread64(unsigned int fd,
 					char __user *ubuf,
 					compat_size_t count,
diff --git a/arch/sparc64/kernel/syscalls.S b/arch/sparc64/kernel/syscalls.S
index a2f2427..7a6786a 100644
--- a/arch/sparc64/kernel/syscalls.S
+++ b/arch/sparc64/kernel/syscalls.S
@@ -65,9 +65,8 @@ sys32_rt_sigreturn:
 	andcc	%l5, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT), %g0
 	be,pt	%icc, rtrap
 	 nop
-	add	%sp, PTREGS_OFF, %o0
-	call	syscall_trace
-	 mov	1, %o1
+	call	syscall_trace_leave
+	 add	%sp, PTREGS_OFF, %o0
 	ba,pt	%xcc, rtrap
 	 nop
 
@@ -159,9 +158,8 @@ linux_sparc_ni_syscall:
 	 or	%l7, %lo(sys_ni_syscall), %l7
 
 linux_syscall_trace32:
-	add	%sp, PTREGS_OFF, %o0
-	call	syscall_trace
-	 clr	%o1
+	call	syscall_trace_enter
+	 add	%sp, PTREGS_OFF, %o0
 	brnz,pn	%o0, 3f
 	 mov	-ENOSYS, %o0
 	srl	%i0, 0, %o0
@@ -172,9 +170,8 @@ linux_syscall_trace32:
 	 srl	%i3, 0, %o3
 
 linux_syscall_trace:
-	add	%sp, PTREGS_OFF, %o0
-	call	syscall_trace
-	 clr	%o1
+	call	syscall_trace_enter
+	 add	%sp, PTREGS_OFF, %o0
 	brnz,pn	%o0, 3f
 	 mov	-ENOSYS, %o0
 	mov	%i0, %o0
@@ -275,9 +272,8 @@ ret_sys_call:
 	b,pt	%xcc, rtrap
 	 stx	%l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
 linux_syscall_trace2:
-	add	%sp, PTREGS_OFF, %o0
-	call	syscall_trace
-	 mov	1, %o1
+	call	syscall_trace_leave
+	 add	%sp, PTREGS_OFF, %o0
 	stx	%l1, [%sp + PTREGS_OFF + PT_V9_TPC]
 	ba,pt	%xcc, rtrap
 	 stx	%l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 0fdbf3b..b2fa4c1 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -23,7 +23,7 @@ sys_call_table32:
 /*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
 /*15*/	.word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
-/*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause
+/*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
 	.word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile
 /*40*/	.word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid
@@ -41,8 +41,8 @@ sys_call_table32:
 /*100*/ .word sys32_getpriority, sys32_rt_sigreturn, sys32_rt_sigaction, sys32_rt_sigprocmask, sys32_rt_sigpending
 	.word compat_sys_rt_sigtimedwait, sys32_rt_sigqueueinfo, compat_sys_rt_sigsuspend, sys_setresuid, sys_getresuid
 /*110*/	.word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
-	.word sys32_getgroups, sys32_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
-/*120*/	.word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys_fchown16, sys_fchmod
+	.word sys32_getgroups, compat_sys_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
+/*120*/	.word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod
 	.word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
 /*130*/	.word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
 	.word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index cc16fdc..80d71a5 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -30,13 +30,14 @@
 #include <linux/percpu.h>
 #include <linux/miscdevice.h>
 #include <linux/rtc.h>
+#include <linux/rtc/m48t59.h>
 #include <linux/kernel_stat.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
 #include <linux/of_device.h>
+#include <linux/platform_device.h>
 
 #include <asm/oplib.h>
-#include <asm/mostek.h>
 #include <asm/timer.h>
 #include <asm/irq.h>
 #include <asm/io.h>
@@ -50,18 +51,7 @@
 
 #include "entry.h"
 
-DEFINE_SPINLOCK(mostek_lock);
 DEFINE_SPINLOCK(rtc_lock);
-void __iomem *mstk48t02_regs = NULL;
-#ifdef CONFIG_PCI
-unsigned long ds1287_regs = 0UL;
-static void __iomem *bq4802_regs;
-#endif
-
-static void __iomem *mstk48t08_regs;
-static void __iomem *mstk48t59_regs;
-
-static int set_rtc_mmss(unsigned long);
 
 #define TICK_PRIV_BIT	(1UL << 63)
 #define TICKCMP_IRQ_BIT	(1UL << 63)
@@ -405,313 +395,167 @@ static unsigned long timer_ticks_per_nsec_quotient __read_mostly;
 
 int update_persistent_clock(struct timespec now)
 {
-	return set_rtc_mmss(now.tv_sec);
-}
+	struct rtc_device *rtc = rtc_class_open("rtc0");
+	int err = -1;
 
-/* Kick start a stopped clock (procedure from the Sun NVRAM/hostid FAQ). */
-static void __init kick_start_clock(void)
-{
-	void __iomem *regs = mstk48t02_regs;
-	u8 sec, tmp;
-	int i, count;
-
-	prom_printf("CLOCK: Clock was stopped. Kick start ");
-
-	spin_lock_irq(&mostek_lock);
-
-	/* Turn on the kick start bit to start the oscillator. */
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp |= MSTK_CREG_WRITE;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-	tmp = mostek_read(regs + MOSTEK_SEC);
-	tmp &= ~MSTK_STOP;
-	mostek_write(regs + MOSTEK_SEC, tmp);
-	tmp = mostek_read(regs + MOSTEK_HOUR);
-	tmp |= MSTK_KICK_START;
-	mostek_write(regs + MOSTEK_HOUR, tmp);
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp &= ~MSTK_CREG_WRITE;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-
-	spin_unlock_irq(&mostek_lock);
-
-	/* Delay to allow the clock oscillator to start. */
-	sec = MSTK_REG_SEC(regs);
-	for (i = 0; i < 3; i++) {
-		while (sec == MSTK_REG_SEC(regs))
-			for (count = 0; count < 100000; count++)
-				/* nothing */ ;
-		prom_printf(".");
-		sec = MSTK_REG_SEC(regs);
-	}
-	prom_printf("\n");
-
-	spin_lock_irq(&mostek_lock);
-
-	/* Turn off kick start and set a "valid" time and date. */
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp |= MSTK_CREG_WRITE;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-	tmp = mostek_read(regs + MOSTEK_HOUR);
-	tmp &= ~MSTK_KICK_START;
-	mostek_write(regs + MOSTEK_HOUR, tmp);
-	MSTK_SET_REG_SEC(regs,0);
-	MSTK_SET_REG_MIN(regs,0);
-	MSTK_SET_REG_HOUR(regs,0);
-	MSTK_SET_REG_DOW(regs,5);
-	MSTK_SET_REG_DOM(regs,1);
-	MSTK_SET_REG_MONTH(regs,8);
-	MSTK_SET_REG_YEAR(regs,1996 - MSTK_YEAR_ZERO);
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp &= ~MSTK_CREG_WRITE;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-
-	spin_unlock_irq(&mostek_lock);
-
-	/* Ensure the kick start bit is off. If it isn't, turn it off. */
-	while (mostek_read(regs + MOSTEK_HOUR) & MSTK_KICK_START) {
-		prom_printf("CLOCK: Kick start still on!\n");
-
-		spin_lock_irq(&mostek_lock);
-
-		tmp = mostek_read(regs + MOSTEK_CREG);
-		tmp |= MSTK_CREG_WRITE;
-		mostek_write(regs + MOSTEK_CREG, tmp);
-
-		tmp = mostek_read(regs + MOSTEK_HOUR);
-		tmp &= ~MSTK_KICK_START;
-		mostek_write(regs + MOSTEK_HOUR, tmp);
-
-		tmp = mostek_read(regs + MOSTEK_CREG);
-		tmp &= ~MSTK_CREG_WRITE;
-		mostek_write(regs + MOSTEK_CREG, tmp);
-
-		spin_unlock_irq(&mostek_lock);
+	if (rtc) {
+		err = rtc_set_mmss(rtc, now.tv_sec);
+		rtc_class_close(rtc);
 	}
 
-	prom_printf("CLOCK: Kick start procedure successful.\n");
+	return err;
 }
 
-/* Return nonzero if the clock chip battery is low. */
-static int __init has_low_battery(void)
-{
-	void __iomem *regs = mstk48t02_regs;
-	u8 data1, data2;
-
-	spin_lock_irq(&mostek_lock);
+unsigned long cmos_regs;
+EXPORT_SYMBOL(cmos_regs);
 
-	data1 = mostek_read(regs + MOSTEK_EEPROM);	/* Read some data. */
-	mostek_write(regs + MOSTEK_EEPROM, ~data1);	/* Write back the complement. */
-	data2 = mostek_read(regs + MOSTEK_EEPROM);	/* Read back the complement. */
-	mostek_write(regs + MOSTEK_EEPROM, data1);	/* Restore original value. */
+static struct resource rtc_cmos_resource;
 
-	spin_unlock_irq(&mostek_lock);
-
-	return (data1 == data2);	/* Was the write blocked? */
-}
+static struct platform_device rtc_cmos_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= &rtc_cmos_resource,
+	.num_resources	= 1,
+};
 
-static void __init mostek_set_system_time(void __iomem *mregs)
+static int __devinit rtc_probe(struct of_device *op, const struct of_device_id *match)
 {
-	unsigned int year, mon, day, hour, min, sec;
-	u8 tmp;
-
-	spin_lock_irq(&mostek_lock);
+	struct resource *r;
 
-	/* Traditional Mostek chip. */
-	tmp = mostek_read(mregs + MOSTEK_CREG);
-	tmp |= MSTK_CREG_READ;
-	mostek_write(mregs + MOSTEK_CREG, tmp);
+	printk(KERN_INFO "%s: RTC regs at 0x%lx\n",
+	       op->node->full_name, op->resource[0].start);
 
-	sec = MSTK_REG_SEC(mregs);
-	min = MSTK_REG_MIN(mregs);
-	hour = MSTK_REG_HOUR(mregs);
-	day = MSTK_REG_DOM(mregs);
-	mon = MSTK_REG_MONTH(mregs);
-	year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
-
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-	set_normalized_timespec(&wall_to_monotonic,
- 	                        -xtime.tv_sec, -xtime.tv_nsec);
+	/* The CMOS RTC driver only accepts IORESOURCE_IO, so cons
+	 * up a fake resource so that the probe works for all cases.
+	 * When the RTC is behind an ISA bus it will have IORESOURCE_IO
+	 * already, whereas when it's behind EBUS is will be IORESOURCE_MEM.
+	 */
 
-	tmp = mostek_read(mregs + MOSTEK_CREG);
-	tmp &= ~MSTK_CREG_READ;
-	mostek_write(mregs + MOSTEK_CREG, tmp);
+	r = &rtc_cmos_resource;
+	r->flags = IORESOURCE_IO;
+	r->name = op->resource[0].name;
+	r->start = op->resource[0].start;
+	r->end = op->resource[0].end;
 
-	spin_unlock_irq(&mostek_lock);
+	cmos_regs = op->resource[0].start;
+	return platform_device_register(&rtc_cmos_device);
 }
 
-/* Probe for the real time clock chip. */
-static void __init set_system_time(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-	void __iomem *mregs = mstk48t02_regs;
-#ifdef CONFIG_PCI
-	unsigned long dregs = ds1287_regs;
-	void __iomem *bregs = bq4802_regs;
-#else
-	unsigned long dregs = 0UL;
-	void __iomem *bregs = 0UL;
-#endif
-
-	if (!mregs && !dregs && !bregs) {
-		prom_printf("Something wrong, clock regs not mapped yet.\n");
-		prom_halt();
-	}		
-
-	if (mregs) {
-		mostek_set_system_time(mregs);
-		return;
-	}
-
-	if (bregs) {
-		unsigned char val = readb(bregs + 0x0e);
-		unsigned int century;
+static struct of_device_id __initdata rtc_match[] = {
+	{
+		.name = "rtc",
+		.compatible = "m5819",
+	},
+	{
+		.name = "rtc",
+		.compatible = "isa-m5819p",
+	},
+	{
+		.name = "rtc",
+		.compatible = "isa-m5823p",
+	},
+	{
+		.name = "rtc",
+		.compatible = "ds1287",
+	},
+	{},
+};
 
-		/* BQ4802 RTC chip. */
+static struct of_platform_driver rtc_driver = {
+	.match_table	= rtc_match,
+	.probe		= rtc_probe,
+	.driver		= {
+		.name	= "rtc",
+	},
+};
 
-		writeb(val | 0x08, bregs + 0x0e);
+static struct platform_device rtc_bq4802_device = {
+	.name		= "rtc-bq4802",
+	.id		= -1,
+	.num_resources	= 1,
+};
 
-		sec  = readb(bregs + 0x00);
-		min  = readb(bregs + 0x02);
-		hour = readb(bregs + 0x04);
-		day  = readb(bregs + 0x06);
-		mon  = readb(bregs + 0x09);
-		year = readb(bregs + 0x0a);
-		century = readb(bregs + 0x0f);
+static int __devinit bq4802_probe(struct of_device *op, const struct of_device_id *match)
+{
 
-		writeb(val, bregs + 0x0e);
+	printk(KERN_INFO "%s: BQ4802 regs at 0x%lx\n",
+	       op->node->full_name, op->resource[0].start);
 
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
-		BCD_TO_BIN(century);
+	rtc_bq4802_device.resource = &op->resource[0];
+	return platform_device_register(&rtc_bq4802_device);
+}
 
-		year += (century * 100);
-	} else {
-		/* Dallas 12887 RTC chip. */
-
-		do {
-			sec  = CMOS_READ(RTC_SECONDS);
-			min  = CMOS_READ(RTC_MINUTES);
-			hour = CMOS_READ(RTC_HOURS);
-			day  = CMOS_READ(RTC_DAY_OF_MONTH);
-			mon  = CMOS_READ(RTC_MONTH);
-			year = CMOS_READ(RTC_YEAR);
-		} while (sec != CMOS_READ(RTC_SECONDS));
-
-		if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BCD_TO_BIN(sec);
-			BCD_TO_BIN(min);
-			BCD_TO_BIN(hour);
-			BCD_TO_BIN(day);
-			BCD_TO_BIN(mon);
-			BCD_TO_BIN(year);
-		}
-		if ((year += 1900) < 1970)
-			year += 100;
-	}
+static struct of_device_id __initdata bq4802_match[] = {
+	{
+		.name = "rtc",
+		.compatible = "bq4802",
+	},
+};
 
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-	set_normalized_timespec(&wall_to_monotonic,
- 	                        -xtime.tv_sec, -xtime.tv_nsec);
-}
+static struct of_platform_driver bq4802_driver = {
+	.match_table	= bq4802_match,
+	.probe		= bq4802_probe,
+	.driver		= {
+		.name	= "bq4802",
+	},
+};
 
-/* davem suggests we keep this within the 4M locked kernel image */
-static u32 starfire_get_time(void)
+static unsigned char mostek_read_byte(struct device *dev, u32 ofs)
 {
-	static char obp_gettod[32];
-	static u32 unix_tod;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = pdev->dev.platform_data;
+	void __iomem *regs;
+	unsigned char val;
 
-	sprintf(obp_gettod, "h# %08x unix-gettod",
-		(unsigned int) (long) &unix_tod);
-	prom_feval(obp_gettod);
+	regs = (void __iomem *) pdev->resource[0].start;
+	val = readb(regs + ofs);
 
-	return unix_tod;
+	/* the year 0 is 1968 */
+	if (ofs == pdata->offset + M48T59_YEAR) {
+		val += 0x68;
+		if ((val & 0xf) > 9)
+			val += 6;
+	}
+	return val;
 }
 
-static int starfire_set_time(u32 val)
+static void mostek_write_byte(struct device *dev, u32 ofs, u8 val)
 {
-	/* Do nothing, time is set using the service processor
-	 * console on this platform.
-	 */
-	return 0;
-}
+	struct platform_device *pdev = to_platform_device(dev);
+	struct m48t59_plat_data *pdata = pdev->dev.platform_data;
+	void __iomem *regs;
 
-static u32 hypervisor_get_time(void)
-{
-	unsigned long ret, time;
-	int retries = 10000;
-
-retry:
-	ret = sun4v_tod_get(&time);
-	if (ret == HV_EOK)
-		return time;
-	if (ret == HV_EWOULDBLOCK) {
-		if (--retries > 0) {
-			udelay(100);
-			goto retry;
-		}
-		printk(KERN_WARNING "SUN4V: tod_get() timed out.\n");
-		return 0;
+	regs = (void __iomem *) pdev->resource[0].start;
+	if (ofs == pdata->offset + M48T59_YEAR) {
+		if (val < 0x68)
+			val += 0x32;
+		else
+			val -= 0x68;
+		if ((val & 0xf) > 9)
+			val += 6;
+		if ((val & 0xf0) > 0x9A)
+			val += 0x60;
 	}
-	printk(KERN_WARNING "SUN4V: tod_get() not supported.\n");
-	return 0;
+	writeb(val, regs + ofs);
 }
 
-static int hypervisor_set_time(u32 secs)
-{
-	unsigned long ret;
-	int retries = 10000;
-
-retry:
-	ret = sun4v_tod_set(secs);
-	if (ret == HV_EOK)
-		return 0;
-	if (ret == HV_EWOULDBLOCK) {
-		if (--retries > 0) {
-			udelay(100);
-			goto retry;
-		}
-		printk(KERN_WARNING "SUN4V: tod_set() timed out.\n");
-		return -EAGAIN;
-	}
-	printk(KERN_WARNING "SUN4V: tod_set() not supported.\n");
-	return -EOPNOTSUPP;
-}
+static struct m48t59_plat_data m48t59_data = {
+	.read_byte	= mostek_read_byte,
+	.write_byte	= mostek_write_byte,
+};
 
-static int __init clock_model_matches(const char *model)
-{
-	if (strcmp(model, "mk48t02") &&
-	    strcmp(model, "mk48t08") &&
-	    strcmp(model, "mk48t59") &&
-	    strcmp(model, "m5819") &&
-	    strcmp(model, "m5819p") &&
-	    strcmp(model, "m5823") &&
-	    strcmp(model, "ds1287") &&
-	    strcmp(model, "bq4802"))
-		return 0;
-
-	return 1;
-}
+static struct platform_device m48t59_rtc = {
+	.name		= "rtc-m48t59",
+	.id		= 0,
+	.num_resources	= 1,
+	.dev	= {
+		.platform_data = &m48t59_data,
+	},
+};
 
-static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit mostek_probe(struct of_device *op, const struct of_device_id *match)
 {
 	struct device_node *dp = op->node;
-	const char *model = of_get_property(dp, "model", NULL);
-	const char *compat = of_get_property(dp, "compatible", NULL);
-	unsigned long size, flags;
-	void __iomem *regs;
-
-	if (!model)
-		model = compat;
-
-	if (!model || !clock_model_matches(model))
-		return -ENODEV;
 
 	/* On an Enterprise system there can be multiple mostek clocks.
 	 * We should only match the one that is on the central FHC bus.
@@ -720,88 +564,51 @@ static int __devinit clock_probe(struct of_device *op, const struct of_device_id
 	    strcmp(dp->parent->parent->name, "central") != 0)
 		return -ENODEV;
 
-	size = (op->resource[0].end - op->resource[0].start) + 1;
-	regs = of_ioremap(&op->resource[0], 0, size, "clock");
-	if (!regs)
-		return -ENOMEM;
-
-#ifdef CONFIG_PCI
-	if (!strcmp(model, "ds1287") ||
-	    !strcmp(model, "m5819") ||
-	    !strcmp(model, "m5819p") ||
-	    !strcmp(model, "m5823")) {
-		ds1287_regs = (unsigned long) regs;
-	} else if (!strcmp(model, "bq4802")) {
-		bq4802_regs = regs;
-	} else
-#endif
-	if (model[5] == '0' && model[6] == '2') {
-		mstk48t02_regs = regs;
-	} else if(model[5] == '0' && model[6] == '8') {
-		mstk48t08_regs = regs;
-		mstk48t02_regs = mstk48t08_regs + MOSTEK_48T08_48T02;
-	} else {
-		mstk48t59_regs = regs;
-		mstk48t02_regs = mstk48t59_regs + MOSTEK_48T59_48T02;
-	}
-
-	printk(KERN_INFO "%s: Clock regs at %p\n", dp->full_name, regs);
-
-	local_irq_save(flags);
-
-	if (mstk48t02_regs != NULL) {
-		/* Report a low battery voltage condition. */
-		if (has_low_battery())
-			prom_printf("NVRAM: Low battery voltage!\n");
-
-		/* Kick start the clock if it is completely stopped. */
-		if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
-			kick_start_clock();
-	}
-
-	set_system_time();
-	
-	local_irq_restore(flags);
+	printk(KERN_INFO "%s: Mostek regs at 0x%lx\n",
+	       dp->full_name, op->resource[0].start);
 
-	return 0;
+	m48t59_rtc.resource = &op->resource[0];
+	return platform_device_register(&m48t59_rtc);
 }
 
-static struct of_device_id clock_match[] = {
+static struct of_device_id __initdata mostek_match[] = {
 	{
 		.name = "eeprom",
 	},
-	{
-		.name = "rtc",
-	},
 	{},
 };
 
-static struct of_platform_driver clock_driver = {
-	.match_table	= clock_match,
-	.probe		= clock_probe,
+static struct of_platform_driver mostek_driver = {
+	.match_table	= mostek_match,
+	.probe		= mostek_probe,
 	.driver		= {
-		.name	= "clock",
+		.name	= "mostek",
 	},
 };
 
+static struct platform_device rtc_sun4v_device = {
+	.name		= "rtc-sun4v",
+	.id		= -1,
+};
+
+static struct platform_device rtc_starfire_device = {
+	.name		= "rtc-starfire",
+	.id		= -1,
+};
+
 static int __init clock_init(void)
 {
-	if (this_is_starfire) {
-		xtime.tv_sec = starfire_get_time();
-		xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-		set_normalized_timespec(&wall_to_monotonic,
-		                        -xtime.tv_sec, -xtime.tv_nsec);
-		return 0;
-	}
-	if (tlb_type == hypervisor) {
-		xtime.tv_sec = hypervisor_get_time();
-		xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-		set_normalized_timespec(&wall_to_monotonic,
-		                        -xtime.tv_sec, -xtime.tv_nsec);
-		return 0;
-	}
+	if (this_is_starfire)
+		return platform_device_register(&rtc_starfire_device);
+
+	if (tlb_type == hypervisor)
+		return platform_device_register(&rtc_sun4v_device);
+
+	(void) of_register_driver(&rtc_driver, &of_platform_bus_type);
+	(void) of_register_driver(&mostek_driver, &of_platform_bus_type);
+	(void) of_register_driver(&bq4802_driver, &of_platform_bus_type);
 
-	return of_register_driver(&clock_driver, &of_platform_bus_type);
+	return 0;
 }
 
 /* Must be after subsys_initcall() so that busses are probed.  Must
@@ -814,7 +621,7 @@ fs_initcall(clock_init);
 static unsigned long sparc64_init_timers(void)
 {
 	struct device_node *dp;
-	unsigned long clock;
+	unsigned long freq;
 
 	dp = of_find_node_by_path("/");
 	if (tlb_type == spitfire) {
@@ -827,17 +634,17 @@ static unsigned long sparc64_init_timers(void)
 		if (manuf == 0x17 && impl == 0x13) {
 			/* Hummingbird, aka Ultra-IIe */
 			tick_ops = &hbtick_operations;
-			clock = of_getintprop_default(dp, "stick-frequency", 0);
+			freq = of_getintprop_default(dp, "stick-frequency", 0);
 		} else {
 			tick_ops = &tick_operations;
-			clock = local_cpu_data().clock_tick;
+			freq = local_cpu_data().clock_tick;
 		}
 	} else {
 		tick_ops = &stick_operations;
-		clock = of_getintprop_default(dp, "stick-frequency", 0);
+		freq = of_getintprop_default(dp, "stick-frequency", 0);
 	}
 
-	return clock;
+	return freq;
 }
 
 struct freq_table {
@@ -1029,16 +836,16 @@ EXPORT_SYMBOL(udelay);
 
 void __init time_init(void)
 {
-	unsigned long clock = sparc64_init_timers();
+	unsigned long freq = sparc64_init_timers();
 
-	tb_ticks_per_usec = clock / USEC_PER_SEC;
+	tb_ticks_per_usec = freq / USEC_PER_SEC;
 
 	timer_ticks_per_nsec_quotient =
-		clocksource_hz2mult(clock, SPARC64_NSEC_PER_CYC_SHIFT);
+		clocksource_hz2mult(freq, SPARC64_NSEC_PER_CYC_SHIFT);
 
 	clocksource_tick.name = tick_ops->name;
 	clocksource_tick.mult =
-		clocksource_hz2mult(clock,
+		clocksource_hz2mult(freq,
 				    clocksource_tick.shift);
 	clocksource_tick.read = tick_ops->get_tick;
 
@@ -1049,7 +856,7 @@ void __init time_init(void)
 
 	sparc64_clockevent.name = tick_ops->name;
 
-	setup_clockevent_multiplier(clock);
+	setup_clockevent_multiplier(freq);
 
 	sparc64_clockevent.max_delta_ns =
 		clockevent_delta2ns(0x7fffffffffffffffUL, &sparc64_clockevent);
@@ -1070,672 +877,8 @@ unsigned long long sched_clock(void)
 		>> SPARC64_NSEC_PER_CYC_SHIFT;
 }
 
-static int set_rtc_mmss(unsigned long nowtime)
-{
-	int real_seconds, real_minutes, chip_minutes;
-	void __iomem *mregs = mstk48t02_regs;
-#ifdef CONFIG_PCI
-	unsigned long dregs = ds1287_regs;
-	void __iomem *bregs = bq4802_regs;
-#else
-	unsigned long dregs = 0UL;
-	void __iomem *bregs = 0UL;
-#endif
-	unsigned long flags;
-	u8 tmp;
-
-	/* 
-	 * Not having a register set can lead to trouble.
-	 * Also starfire doesn't have a tod clock.
-	 */
-	if (!mregs && !dregs && !bregs)
-		return -1;
-
-	if (mregs) {
-		spin_lock_irqsave(&mostek_lock, flags);
-
-		/* Read the current RTC minutes. */
-		tmp = mostek_read(mregs + MOSTEK_CREG);
-		tmp |= MSTK_CREG_READ;
-		mostek_write(mregs + MOSTEK_CREG, tmp);
-
-		chip_minutes = MSTK_REG_MIN(mregs);
-
-		tmp = mostek_read(mregs + MOSTEK_CREG);
-		tmp &= ~MSTK_CREG_READ;
-		mostek_write(mregs + MOSTEK_CREG, tmp);
-
-		/*
-		 * since we're only adjusting minutes and seconds,
-		 * don't interfere with hour overflow. This avoids
-		 * messing with unknown time zones but requires your
-		 * RTC not to be off by more than 15 minutes
-		 */
-		real_seconds = nowtime % 60;
-		real_minutes = nowtime / 60;
-		if (((abs(real_minutes - chip_minutes) + 15)/30) & 1)
-			real_minutes += 30;	/* correct for half hour time zone */
-		real_minutes %= 60;
-
-		if (abs(real_minutes - chip_minutes) < 30) {
-			tmp = mostek_read(mregs + MOSTEK_CREG);
-			tmp |= MSTK_CREG_WRITE;
-			mostek_write(mregs + MOSTEK_CREG, tmp);
-
-			MSTK_SET_REG_SEC(mregs,real_seconds);
-			MSTK_SET_REG_MIN(mregs,real_minutes);
-
-			tmp = mostek_read(mregs + MOSTEK_CREG);
-			tmp &= ~MSTK_CREG_WRITE;
-			mostek_write(mregs + MOSTEK_CREG, tmp);
-
-			spin_unlock_irqrestore(&mostek_lock, flags);
-
-			return 0;
-		} else {
-			spin_unlock_irqrestore(&mostek_lock, flags);
-
-			return -1;
-		}
-	} else if (bregs) {
-		int retval = 0;
-		unsigned char val = readb(bregs + 0x0e);
-
-		/* BQ4802 RTC chip. */
-
-		writeb(val | 0x08, bregs + 0x0e);
-
-		chip_minutes = readb(bregs + 0x02);
-		BCD_TO_BIN(chip_minutes);
-		real_seconds = nowtime % 60;
-		real_minutes = nowtime / 60;
-		if (((abs(real_minutes - chip_minutes) + 15)/30) & 1)
-			real_minutes += 30;
-		real_minutes %= 60;
-
-		if (abs(real_minutes - chip_minutes) < 30) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
-			writeb(real_seconds, bregs + 0x00);
-			writeb(real_minutes, bregs + 0x02);
-		} else {
-			printk(KERN_WARNING
-			       "set_rtc_mmss: can't update from %d to %d\n",
-			       chip_minutes, real_minutes);
-			retval = -1;
-		}
-
-		writeb(val, bregs + 0x0e);
-
-		return retval;
-	} else {
-		int retval = 0;
-		unsigned char save_control, save_freq_select;
-
-		/* Stolen from arch/i386/kernel/time.c, see there for
-		 * credits and descriptive comments.
-		 */
-		spin_lock_irqsave(&rtc_lock, flags);
-		save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
-		CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
-		save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
-		CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-		chip_minutes = CMOS_READ(RTC_MINUTES);
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-			BCD_TO_BIN(chip_minutes);
-		real_seconds = nowtime % 60;
-		real_minutes = nowtime / 60;
-		if (((abs(real_minutes - chip_minutes) + 15)/30) & 1)
-			real_minutes += 30;
-		real_minutes %= 60;
-
-		if (abs(real_minutes - chip_minutes) < 30) {
-			if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-				BIN_TO_BCD(real_seconds);
-				BIN_TO_BCD(real_minutes);
-			}
-			CMOS_WRITE(real_seconds,RTC_SECONDS);
-			CMOS_WRITE(real_minutes,RTC_MINUTES);
-		} else {
-			printk(KERN_WARNING
-			       "set_rtc_mmss: can't update from %d to %d\n",
-			       chip_minutes, real_minutes);
-			retval = -1;
-		}
-
-		CMOS_WRITE(save_control, RTC_CONTROL);
-		CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-		spin_unlock_irqrestore(&rtc_lock, flags);
-
-		return retval;
-	}
-}
-
-#define RTC_IS_OPEN		0x01	/* means /dev/rtc is in use	*/
-static unsigned char mini_rtc_status;	/* bitmapped status byte.	*/
-
-#define FEBRUARY	2
-#define	STARTOFTIME	1970
-#define SECDAY		86400L
-#define SECYR		(SECDAY * 365)
-#define	leapyear(year)		((year) % 4 == 0 && \
-				 ((year) % 100 != 0 || (year) % 400 == 0))
-#define	days_in_year(a) 	(leapyear(a) ? 366 : 365)
-#define	days_in_month(a) 	(month_days[(a) - 1])
-
-static int month_days[12] = {
-	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-/*
- * This only works for the Gregorian calendar - i.e. after 1752 (in the UK)
- */
-static void GregorianDay(struct rtc_time * tm)
-{
-	int leapsToDate;
-	int lastYear;
-	int day;
-	int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 };
-
-	lastYear = tm->tm_year - 1;
-
-	/*
-	 * Number of leap corrections to apply up to end of last year
-	 */
-	leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400;
-
-	/*
-	 * This year is a leap year if it is divisible by 4 except when it is
-	 * divisible by 100 unless it is divisible by 400
-	 *
-	 * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was
-	 */
-	day = tm->tm_mon > 2 && leapyear(tm->tm_year);
-
-	day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] +
-		   tm->tm_mday;
-
-	tm->tm_wday = day % 7;
-}
-
-static void to_tm(int tim, struct rtc_time *tm)
-{
-	register int    i;
-	register long   hms, day;
-
-	day = tim / SECDAY;
-	hms = tim % SECDAY;
-
-	/* Hours, minutes, seconds are easy */
-	tm->tm_hour = hms / 3600;
-	tm->tm_min = (hms % 3600) / 60;
-	tm->tm_sec = (hms % 3600) % 60;
-
-	/* Number of years in days */
-	for (i = STARTOFTIME; day >= days_in_year(i); i++)
-		day -= days_in_year(i);
-	tm->tm_year = i;
-
-	/* Number of months in days left */
-	if (leapyear(tm->tm_year))
-		days_in_month(FEBRUARY) = 29;
-	for (i = 1; day >= days_in_month(i); i++)
-		day -= days_in_month(i);
-	days_in_month(FEBRUARY) = 28;
-	tm->tm_mon = i;
-
-	/* Days are what is left over (+1) from all that. */
-	tm->tm_mday = day + 1;
-
-	/*
-	 * Determine the day of week
-	 */
-	GregorianDay(tm);
-}
-
-/* Both Starfire and SUN4V give us seconds since Jan 1st, 1970,
- * aka Unix time.  So we have to convert to/from rtc_time.
- */
-static void starfire_get_rtc_time(struct rtc_time *time)
-{
-	u32 seconds = starfire_get_time();
-
-	to_tm(seconds, time);
-	time->tm_year -= 1900;
-	time->tm_mon -= 1;
-}
-
-static int starfire_set_rtc_time(struct rtc_time *time)
-{
-	u32 seconds = mktime(time->tm_year + 1900, time->tm_mon + 1,
-			     time->tm_mday, time->tm_hour,
-			     time->tm_min, time->tm_sec);
-
-	return starfire_set_time(seconds);
-}
-
-static void hypervisor_get_rtc_time(struct rtc_time *time)
-{
-	u32 seconds = hypervisor_get_time();
-
-	to_tm(seconds, time);
-	time->tm_year -= 1900;
-	time->tm_mon -= 1;
-}
-
-static int hypervisor_set_rtc_time(struct rtc_time *time)
-{
-	u32 seconds = mktime(time->tm_year + 1900, time->tm_mon + 1,
-			     time->tm_mday, time->tm_hour,
-			     time->tm_min, time->tm_sec);
-
-	return hypervisor_set_time(seconds);
-}
-
-#ifdef CONFIG_PCI
-static void bq4802_get_rtc_time(struct rtc_time *time)
-{
-	unsigned char val = readb(bq4802_regs + 0x0e);
-	unsigned int century;
-
-	writeb(val | 0x08, bq4802_regs + 0x0e);
-
-	time->tm_sec = readb(bq4802_regs + 0x00);
-	time->tm_min = readb(bq4802_regs + 0x02);
-	time->tm_hour = readb(bq4802_regs + 0x04);
-	time->tm_mday = readb(bq4802_regs + 0x06);
-	time->tm_mon = readb(bq4802_regs + 0x09);
-	time->tm_year = readb(bq4802_regs + 0x0a);
-	time->tm_wday = readb(bq4802_regs + 0x08);
-	century = readb(bq4802_regs + 0x0f);
-
-	writeb(val, bq4802_regs + 0x0e);
-
-	BCD_TO_BIN(time->tm_sec);
-	BCD_TO_BIN(time->tm_min);
-	BCD_TO_BIN(time->tm_hour);
-	BCD_TO_BIN(time->tm_mday);
-	BCD_TO_BIN(time->tm_mon);
-	BCD_TO_BIN(time->tm_year);
-	BCD_TO_BIN(time->tm_wday);
-	BCD_TO_BIN(century);
-
-	time->tm_year += (century * 100);
-	time->tm_year -= 1900;
-
-	time->tm_mon--;
-}
-
-static int bq4802_set_rtc_time(struct rtc_time *time)
-{
-	unsigned char val = readb(bq4802_regs + 0x0e);
-	unsigned char sec, min, hrs, day, mon, yrs, century;
-	unsigned int year;
-
-	year = time->tm_year + 1900;
-	century = year / 100;
-	yrs = year % 100;
-
-	mon = time->tm_mon + 1;   /* tm_mon starts at zero */
-	day = time->tm_mday;
-	hrs = time->tm_hour;
-	min = time->tm_min;
-	sec = time->tm_sec;
-
-	BIN_TO_BCD(sec);
-	BIN_TO_BCD(min);
-	BIN_TO_BCD(hrs);
-	BIN_TO_BCD(day);
-	BIN_TO_BCD(mon);
-	BIN_TO_BCD(yrs);
-	BIN_TO_BCD(century);
-
-	writeb(val | 0x08, bq4802_regs + 0x0e);
-
-	writeb(sec, bq4802_regs + 0x00);
-	writeb(min, bq4802_regs + 0x02);
-	writeb(hrs, bq4802_regs + 0x04);
-	writeb(day, bq4802_regs + 0x06);
-	writeb(mon, bq4802_regs + 0x09);
-	writeb(yrs, bq4802_regs + 0x0a);
-	writeb(century, bq4802_regs + 0x0f);
-
-	writeb(val, bq4802_regs + 0x0e);
-
-	return 0;
-}
-
-static void cmos_get_rtc_time(struct rtc_time *rtc_tm)
-{
-	unsigned char ctrl;
-
-	rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
-	rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
-	rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
-	rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
-	rtc_tm->tm_mon = CMOS_READ(RTC_MONTH);
-	rtc_tm->tm_year = CMOS_READ(RTC_YEAR);
-	rtc_tm->tm_wday = CMOS_READ(RTC_DAY_OF_WEEK);
-
-	ctrl = CMOS_READ(RTC_CONTROL);
-	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(rtc_tm->tm_sec);
-		BCD_TO_BIN(rtc_tm->tm_min);
-		BCD_TO_BIN(rtc_tm->tm_hour);
-		BCD_TO_BIN(rtc_tm->tm_mday);
-		BCD_TO_BIN(rtc_tm->tm_mon);
-		BCD_TO_BIN(rtc_tm->tm_year);
-		BCD_TO_BIN(rtc_tm->tm_wday);
-	}
-
-	if (rtc_tm->tm_year <= 69)
-		rtc_tm->tm_year += 100;
-
-	rtc_tm->tm_mon--;
-}
-
-static int cmos_set_rtc_time(struct rtc_time *rtc_tm)
-{
-	unsigned char mon, day, hrs, min, sec;
-	unsigned char save_control, save_freq_select;
-	unsigned int yrs;
-
-	yrs = rtc_tm->tm_year;
-	mon = rtc_tm->tm_mon + 1;
-	day = rtc_tm->tm_mday;
-	hrs = rtc_tm->tm_hour;
-	min = rtc_tm->tm_min;
-	sec = rtc_tm->tm_sec;
-
-	if (yrs >= 100)
-		yrs -= 100;
-
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BIN_TO_BCD(sec);
-		BIN_TO_BCD(min);
-		BIN_TO_BCD(hrs);
-		BIN_TO_BCD(day);
-		BIN_TO_BCD(mon);
-		BIN_TO_BCD(yrs);
-	}
-
-	save_control = CMOS_READ(RTC_CONTROL);
-	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-	CMOS_WRITE(yrs, RTC_YEAR);
-	CMOS_WRITE(mon, RTC_MONTH);
-	CMOS_WRITE(day, RTC_DAY_OF_MONTH);
-	CMOS_WRITE(hrs, RTC_HOURS);
-	CMOS_WRITE(min, RTC_MINUTES);
-	CMOS_WRITE(sec, RTC_SECONDS);
-
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-
-	return 0;
-}
-#endif /* CONFIG_PCI */
-
-static void mostek_get_rtc_time(struct rtc_time *rtc_tm)
-{
-	void __iomem *regs = mstk48t02_regs;
-	u8 tmp;
-
-	spin_lock_irq(&mostek_lock);
-
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp |= MSTK_CREG_READ;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-
-	rtc_tm->tm_sec = MSTK_REG_SEC(regs);
-	rtc_tm->tm_min = MSTK_REG_MIN(regs);
-	rtc_tm->tm_hour = MSTK_REG_HOUR(regs);
-	rtc_tm->tm_mday = MSTK_REG_DOM(regs);
-	rtc_tm->tm_mon = MSTK_REG_MONTH(regs);
-	rtc_tm->tm_year = MSTK_CVT_YEAR( MSTK_REG_YEAR(regs) );
-	rtc_tm->tm_wday = MSTK_REG_DOW(regs);
-
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp &= ~MSTK_CREG_READ;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-
-	spin_unlock_irq(&mostek_lock);
-
-	rtc_tm->tm_mon--;
-	rtc_tm->tm_wday--;
-	rtc_tm->tm_year -= 1900;
-}
-
-static int mostek_set_rtc_time(struct rtc_time *rtc_tm)
-{
-	unsigned char mon, day, hrs, min, sec, wday;
-	void __iomem *regs = mstk48t02_regs;
-	unsigned int yrs;
-	u8 tmp;
-
-	yrs = rtc_tm->tm_year + 1900;
-	mon = rtc_tm->tm_mon + 1;
-	day = rtc_tm->tm_mday;
-	wday = rtc_tm->tm_wday + 1;
-	hrs = rtc_tm->tm_hour;
-	min = rtc_tm->tm_min;
-	sec = rtc_tm->tm_sec;
-
-	spin_lock_irq(&mostek_lock);
-
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp |= MSTK_CREG_WRITE;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-
-	MSTK_SET_REG_SEC(regs, sec);
-	MSTK_SET_REG_MIN(regs, min);
-	MSTK_SET_REG_HOUR(regs, hrs);
-	MSTK_SET_REG_DOW(regs, wday);
-	MSTK_SET_REG_DOM(regs, day);
-	MSTK_SET_REG_MONTH(regs, mon);
-	MSTK_SET_REG_YEAR(regs, yrs - MSTK_YEAR_ZERO);
-
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp &= ~MSTK_CREG_WRITE;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-
-	spin_unlock_irq(&mostek_lock);
-
-	return 0;
-}
-
-struct mini_rtc_ops {
-	void (*get_rtc_time)(struct rtc_time *);
-	int (*set_rtc_time)(struct rtc_time *);
-};
-
-static struct mini_rtc_ops starfire_rtc_ops = {
-	.get_rtc_time = starfire_get_rtc_time,
-	.set_rtc_time = starfire_set_rtc_time,
-};
-
-static struct mini_rtc_ops hypervisor_rtc_ops = {
-	.get_rtc_time = hypervisor_get_rtc_time,
-	.set_rtc_time = hypervisor_set_rtc_time,
-};
-
-#ifdef CONFIG_PCI
-static struct mini_rtc_ops bq4802_rtc_ops = {
-	.get_rtc_time = bq4802_get_rtc_time,
-	.set_rtc_time = bq4802_set_rtc_time,
-};
-
-static struct mini_rtc_ops cmos_rtc_ops = {
-	.get_rtc_time = cmos_get_rtc_time,
-	.set_rtc_time = cmos_set_rtc_time,
-};
-#endif /* CONFIG_PCI */
-
-static struct mini_rtc_ops mostek_rtc_ops = {
-	.get_rtc_time = mostek_get_rtc_time,
-	.set_rtc_time = mostek_set_rtc_time,
-};
-
-static struct mini_rtc_ops *mini_rtc_ops;
-
-static inline void mini_get_rtc_time(struct rtc_time *time)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	mini_rtc_ops->get_rtc_time(time);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-}
-
-static inline int mini_set_rtc_time(struct rtc_time *time)
-{
-	unsigned long flags;
-	int err;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	err = mini_rtc_ops->set_rtc_time(time);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return err;
-}
-
-static int mini_rtc_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
-{
-	struct rtc_time wtime;
-	void __user *argp = (void __user *)arg;
-
-	switch (cmd) {
-
-	case RTC_PLL_GET:
-		return -EINVAL;
-
-	case RTC_PLL_SET:
-		return -EINVAL;
-
-	case RTC_UIE_OFF:	/* disable ints from RTC updates.	*/
-		return 0;
-
-	case RTC_UIE_ON:	/* enable ints for RTC updates.	*/
-	        return -EINVAL;
-
-	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
-		/* this doesn't get week-day, who cares */
-		memset(&wtime, 0, sizeof(wtime));
-		mini_get_rtc_time(&wtime);
-
-		return copy_to_user(argp, &wtime, sizeof(wtime)) ? -EFAULT : 0;
-
-	case RTC_SET_TIME:	/* Set the RTC */
-	    {
-		int year, days;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		if (copy_from_user(&wtime, argp, sizeof(wtime)))
-			return -EFAULT;
-
-		year = wtime.tm_year + 1900;
-		days = month_days[wtime.tm_mon] +
-		       ((wtime.tm_mon == 1) && leapyear(year));
-
-		if ((wtime.tm_mon < 0 || wtime.tm_mon > 11) ||
-		    (wtime.tm_mday < 1))
-			return -EINVAL;
-
-		if (wtime.tm_mday < 0 || wtime.tm_mday > days)
-			return -EINVAL;
-
-		if (wtime.tm_hour < 0 || wtime.tm_hour >= 24 ||
-		    wtime.tm_min < 0 || wtime.tm_min >= 60 ||
-		    wtime.tm_sec < 0 || wtime.tm_sec >= 60)
-			return -EINVAL;
-
-		return mini_set_rtc_time(&wtime);
-	    }
-	}
-
-	return -EINVAL;
-}
-
-static int mini_rtc_open(struct inode *inode, struct file *file)
-{
-	lock_kernel();
-	if (mini_rtc_status & RTC_IS_OPEN) {
-		unlock_kernel();
-		return -EBUSY;
-	}
-
-	mini_rtc_status |= RTC_IS_OPEN;
-	unlock_kernel();
-
-	return 0;
-}
-
-static int mini_rtc_release(struct inode *inode, struct file *file)
-{
-	mini_rtc_status &= ~RTC_IS_OPEN;
-	return 0;
-}
-
-
-static const struct file_operations mini_rtc_fops = {
-	.owner		= THIS_MODULE,
-	.ioctl		= mini_rtc_ioctl,
-	.open		= mini_rtc_open,
-	.release	= mini_rtc_release,
-};
-
-static struct miscdevice rtc_mini_dev =
-{
-	.minor		= RTC_MINOR,
-	.name		= "rtc",
-	.fops		= &mini_rtc_fops,
-};
-
-static int __init rtc_mini_init(void)
-{
-	int retval;
-
-	if (tlb_type == hypervisor)
-		mini_rtc_ops = &hypervisor_rtc_ops;
-	else if (this_is_starfire)
-		mini_rtc_ops = &starfire_rtc_ops;
-#ifdef CONFIG_PCI
-	else if (bq4802_regs)
-		mini_rtc_ops = &bq4802_rtc_ops;
-	else if (ds1287_regs)
-		mini_rtc_ops = &cmos_rtc_ops;
-#endif /* CONFIG_PCI */
-	else if (mstk48t02_regs)
-		mini_rtc_ops = &mostek_rtc_ops;
-	else
-		return -ENODEV;
-
-	printk(KERN_INFO "Mini RTC Driver\n");
-
-	retval = misc_register(&rtc_mini_dev);
-	if (retval < 0)
-		return retval;
-
-	return 0;
-}
-
-static void __exit rtc_mini_exit(void)
-{
-	misc_deregister(&rtc_mini_dev);
-}
-
 int __devinit read_current_timer(unsigned long *timer_val)
 {
 	*timer_val = tick_ops->get_tick();
 	return 0;
 }
-
-module_init(rtc_mini_init);
-module_exit(rtc_mini_exit);
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 704a3af..83abd5a 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -328,6 +328,12 @@ after_lock_tlb:
 
 	wrpr		%g0, 0, %wstate
 
+	sethi		%hi(prom_entry_lock), %g2
+1:	ldstub		[%g2 + %lo(prom_entry_lock)], %g1
+	membar		#StoreLoad | #StoreStore
+	brnz,pn		%g1, 1b
+	 nop
+
 	/* As a hack, put &init_thread_union into %g6.
 	 * prom_world() loads from here to restore the %asi
 	 * register.
@@ -337,7 +343,7 @@ after_lock_tlb:
 
 	sethi		%hi(is_sun4v), %o0
 	lduw		[%o0 + %lo(is_sun4v)], %o0
-	brz,pt		%o0, 1f
+	brz,pt		%o0, 2f
 	 nop
 
 	TRAP_LOAD_TRAP_BLOCK(%g2, %g3)
@@ -369,10 +375,10 @@ after_lock_tlb:
 	call		%o1
 	 add		%sp, (2047 + 128), %o0
 
-	ba,pt		%xcc, 2f
+	ba,pt		%xcc, 3f
 	 nop
 
-1:	sethi		%hi(sparc64_ttable_tl0), %o0
+2:	sethi		%hi(sparc64_ttable_tl0), %o0
 	set		prom_set_trap_table_name, %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x00]
 	mov		1, %g2
@@ -386,7 +392,11 @@ after_lock_tlb:
 	call		%o1
 	 add		%sp, (2047 + 128), %o0
 
-2:	ldx		[%l0], %g6
+3:	sethi		%hi(prom_entry_lock), %g2
+	stb		%g0, [%g2 + %lo(prom_entry_lock)]
+	membar		#StoreStore | #StoreLoad
+
+	ldx		[%l0], %g6
 	ldx		[%g6 + TI_TASK], %g4
 
 	mov		1, %g5
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index c824df1..81ccd22 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -38,6 +38,7 @@
 #include <asm/timer.h>
 #include <asm/head.h>
 #include <asm/prom.h>
+#include <asm/memctrl.h>
 
 #include "entry.h"
 #include "kstack.h"
@@ -129,6 +130,56 @@ void do_BUG(const char *file, int line)
 }
 #endif
 
+static DEFINE_SPINLOCK(dimm_handler_lock);
+static dimm_printer_t dimm_handler;
+
+static int sprintf_dimm(int synd_code, unsigned long paddr, char *buf, int buflen)
+{
+	unsigned long flags;
+	int ret = -ENODEV;
+
+	spin_lock_irqsave(&dimm_handler_lock, flags);
+	if (dimm_handler) {
+		ret = dimm_handler(synd_code, paddr, buf, buflen);
+	} else if (tlb_type == spitfire) {
+		if (prom_getunumber(synd_code, paddr, buf, buflen) == -1)
+			ret = -EINVAL;
+		else
+			ret = 0;
+	} else
+		ret = -ENODEV;
+	spin_unlock_irqrestore(&dimm_handler_lock, flags);
+
+	return ret;
+}
+
+int register_dimm_printer(dimm_printer_t func)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&dimm_handler_lock, flags);
+	if (!dimm_handler)
+		dimm_handler = func;
+	else
+		ret = -EEXIST;
+	spin_unlock_irqrestore(&dimm_handler_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(register_dimm_printer);
+
+void unregister_dimm_printer(dimm_printer_t func)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dimm_handler_lock, flags);
+	if (dimm_handler == func)
+		dimm_handler = NULL;
+	spin_unlock_irqrestore(&dimm_handler_lock, flags);
+}
+EXPORT_SYMBOL_GPL(unregister_dimm_printer);
+
 void spitfire_insn_access_exception(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar)
 {
 	siginfo_t info;
@@ -291,10 +342,7 @@ void sun4v_data_access_exception_tl1(struct pt_regs *regs, unsigned long addr, u
 }
 
 #ifdef CONFIG_PCI
-/* This is really pathetic... */
-extern volatile int pci_poke_in_progress;
-extern volatile int pci_poke_cpu;
-extern volatile int pci_poke_faulted;
+#include "pci_impl.h"
 #endif
 
 /* When access exceptions happen, we must do this. */
@@ -376,8 +424,7 @@ static void spitfire_log_udb_syndrome(unsigned long afar, unsigned long udbh, un
 
 	if (udbl & bit) {
 		scode = ecc_syndrome_table[udbl & 0xff];
-		if (prom_getunumber(scode, afar,
-				    memmod_str, sizeof(memmod_str)) == -1)
+		if (sprintf_dimm(scode, afar, memmod_str, sizeof(memmod_str)) < 0)
 			p = syndrome_unknown;
 		else
 			p = memmod_str;
@@ -388,8 +435,7 @@ static void spitfire_log_udb_syndrome(unsigned long afar, unsigned long udbh, un
 
 	if (udbh & bit) {
 		scode = ecc_syndrome_table[udbh & 0xff];
-		if (prom_getunumber(scode, afar,
-				    memmod_str, sizeof(memmod_str)) == -1)
+		if (sprintf_dimm(scode, afar, memmod_str, sizeof(memmod_str)) < 0)
 			p = syndrome_unknown;
 		else
 			p = memmod_str;
@@ -1062,8 +1108,6 @@ static const char *cheetah_get_string(unsigned long bit)
 	return "???";
 }
 
-extern int chmc_getunumber(int, unsigned long, char *, int);
-
 static void cheetah_log_errors(struct pt_regs *regs, struct cheetah_err_info *info,
 			       unsigned long afsr, unsigned long afar, int recoverable)
 {
@@ -1105,7 +1149,7 @@ static void cheetah_log_errors(struct pt_regs *regs, struct cheetah_err_info *in
 
 		syndrome = (afsr & CHAFSR_E_SYNDROME) >> CHAFSR_E_SYNDROME_SHIFT;
 		syndrome = cheetah_ecc_syntab[syndrome];
-		ret = chmc_getunumber(syndrome, afar, unum, sizeof(unum));
+		ret = sprintf_dimm(syndrome, afar, unum, sizeof(unum));
 		if (ret != -1)
 			printk("%s" "ERROR(%d): AFAR E-syndrome [%s]\n",
 			       (recoverable ? KERN_WARNING : KERN_CRIT),
@@ -1116,7 +1160,7 @@ static void cheetah_log_errors(struct pt_regs *regs, struct cheetah_err_info *in
 
 		syndrome = (afsr & CHAFSR_M_SYNDROME) >> CHAFSR_M_SYNDROME_SHIFT;
 		syndrome = cheetah_mtag_syntab[syndrome];
-		ret = chmc_getunumber(syndrome, afar, unum, sizeof(unum));
+		ret = sprintf_dimm(syndrome, afar, unum, sizeof(unum));
 		if (ret != -1)
 			printk("%s" "ERROR(%d): AFAR M-syndrome [%s]\n",
 			       (recoverable ? KERN_WARNING : KERN_CRIT),
@@ -2224,7 +2268,6 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 
 extern int handle_popc(u32 insn, struct pt_regs *regs);
 extern int handle_ldf_stq(u32 insn, struct pt_regs *regs);
-extern int vis_emul(struct pt_regs *, unsigned int);
 
 void do_illegal_instruction(struct pt_regs *regs)
 {
diff --git a/arch/sparc64/kernel/us3_cpufreq.c b/arch/sparc64/kernel/us3_cpufreq.c
index 47e3aca..365b646 100644
--- a/arch/sparc64/kernel/us3_cpufreq.c
+++ b/arch/sparc64/kernel/us3_cpufreq.c
@@ -183,7 +183,6 @@ static int __init us3_freq_cpu_init(struct cpufreq_policy *policy)
 	table[3].index = 0;
 	table[3].frequency = CPUFREQ_TABLE_END;
 
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 	policy->cpuinfo.transition_latency = 0;
 	policy->cur = clock_tick;
 
diff --git a/arch/sparc64/kernel/vio.c b/arch/sparc64/kernel/vio.c
index a490077..92b1f8e 100644
--- a/arch/sparc64/kernel/vio.c
+++ b/arch/sparc64/kernel/vio.c
@@ -152,7 +152,7 @@ show_pciobppath_attr(struct device *dev, struct device_attribute *attr,
 static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH,
 		   show_pciobppath_attr, NULL);
 
-struct device_node *cdev_node;
+static struct device_node *cdev_node;
 
 static struct vio_dev *root_vdev;
 static u64 cdev_cfg_handle;
@@ -371,9 +371,9 @@ static struct mdesc_notifier_client vio_ds_notifier = {
 	.node_name	= "domain-services-port",
 };
 
-const char *channel_devices_node = "channel-devices";
-const char *channel_devices_compat = "SUNW,sun4v-channel-devices";
-const char *cfg_handle_prop = "cfg-handle";
+static const char *channel_devices_node = "channel-devices";
+static const char *channel_devices_compat = "SUNW,sun4v-channel-devices";
+static const char *cfg_handle_prop = "cfg-handle";
 
 static int __init vio_init(void)
 {
diff --git a/arch/sparc64/kernel/visemul.c b/arch/sparc64/kernel/visemul.c
index c3fd647..9e05cb5 100644
--- a/arch/sparc64/kernel/visemul.c
+++ b/arch/sparc64/kernel/visemul.c
@@ -243,7 +243,7 @@ static inline unsigned int *fps_regaddr(struct fpustate *f,
 struct edge_tab {
 	u16 left, right;
 };
-struct edge_tab edge8_tab[8] = {
+static struct edge_tab edge8_tab[8] = {
 	{ 0xff, 0x80 },
 	{ 0x7f, 0xc0 },
 	{ 0x3f, 0xe0 },
@@ -253,7 +253,7 @@ struct edge_tab edge8_tab[8] = {
 	{ 0x03, 0xfe },
 	{ 0x01, 0xff },
 };
-struct edge_tab edge8_tab_l[8] = {
+static struct edge_tab edge8_tab_l[8] = {
 	{ 0xff, 0x01 },
 	{ 0xfe, 0x03 },
 	{ 0xfc, 0x07 },
@@ -263,23 +263,23 @@ struct edge_tab edge8_tab_l[8] = {
 	{ 0xc0, 0x7f },
 	{ 0x80, 0xff },
 };
-struct edge_tab edge16_tab[4] = {
+static struct edge_tab edge16_tab[4] = {
 	{ 0xf, 0x8 },
 	{ 0x7, 0xc },
 	{ 0x3, 0xe },
 	{ 0x1, 0xf },
 };
-struct edge_tab edge16_tab_l[4] = {
+static struct edge_tab edge16_tab_l[4] = {
 	{ 0xf, 0x1 },
 	{ 0xe, 0x3 },
 	{ 0xc, 0x7 },
 	{ 0x8, 0xf },
 };
-struct edge_tab edge32_tab[2] = {
+static struct edge_tab edge32_tab[2] = {
 	{ 0x3, 0x2 },
 	{ 0x1, 0x3 },
 };
-struct edge_tab edge32_tab_l[2] = {
+static struct edge_tab edge32_tab_l[2] = {
 	{ 0x3, 0x1 },
 	{ 0x2, 0x3 },
 };
diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c
index ea7d7ae..a9e474b 100644
--- a/arch/sparc64/mm/fault.c
+++ b/arch/sparc64/mm/fault.c
@@ -51,43 +51,6 @@ static inline int notify_page_fault(struct pt_regs *regs)
 }
 #endif
 
-/*
- * To debug kernel to catch accesses to certain virtual/physical addresses.
- * Mode = 0 selects physical watchpoints, mode = 1 selects virtual watchpoints.
- * flags = VM_READ watches memread accesses, flags = VM_WRITE watches memwrite accesses.
- * Caller passes in a 64bit aligned addr, with mask set to the bytes that need to be
- * watched. This is only useful on a single cpu machine for now. After the watchpoint
- * is detected, the process causing it will be killed, thus preventing an infinite loop.
- */
-void set_brkpt(unsigned long addr, unsigned char mask, int flags, int mode)
-{
-	unsigned long lsubits;
-
-	__asm__ __volatile__("ldxa [%%g0] %1, %0"
-			     : "=r" (lsubits)
-			     : "i" (ASI_LSU_CONTROL));
-	lsubits &= ~(LSU_CONTROL_PM | LSU_CONTROL_VM |
-		     LSU_CONTROL_PR | LSU_CONTROL_VR |
-		     LSU_CONTROL_PW | LSU_CONTROL_VW);
-
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* no outputs */
-			     : "r" (addr), "r" (mode ? VIRT_WATCHPOINT : PHYS_WATCHPOINT),
-			       "i" (ASI_DMMU));
-
-	lsubits |= ((unsigned long)mask << (mode ? 25 : 33));
-	if (flags & VM_READ)
-		lsubits |= (mode ? LSU_CONTROL_VR : LSU_CONTROL_PR);
-	if (flags & VM_WRITE)
-		lsubits |= (mode ? LSU_CONTROL_VW : LSU_CONTROL_PW);
-	__asm__ __volatile__("stxa %0, [%%g0] %1\n\t"
-			     "membar #Sync"
-			     : /* no outputs */
-			     : "r" (lsubits), "i" (ASI_LSU_CONTROL)
-			     : "memory");
-}
-
 static void __kprobes unhandled_fault(unsigned long address,
 				      struct task_struct *tsk,
 				      struct pt_regs *regs)
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index a41df7b..3c10daf 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -46,15 +46,11 @@
 #include <asm/tsb.h>
 #include <asm/hypervisor.h>
 #include <asm/prom.h>
-#include <asm/sstate.h>
 #include <asm/mdesc.h>
 #include <asm/cpudata.h>
 #include <asm/irq.h>
 
-#define MAX_PHYS_ADDRESS	(1UL << 42UL)
-#define KPTE_BITMAP_CHUNK_SZ	(256UL * 1024UL * 1024UL)
-#define KPTE_BITMAP_BYTES	\
-	((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8)
+#include "init.h"
 
 unsigned long kern_linear_pte_xor[2] __read_mostly;
 
@@ -416,17 +412,9 @@ void mmu_info(struct seq_file *m)
 #endif /* CONFIG_DEBUG_DCFLUSH */
 }
 
-struct linux_prom_translation {
-	unsigned long virt;
-	unsigned long size;
-	unsigned long data;
-};
-
-/* Exported for kernel TLB miss handling in ktlb.S */
 struct linux_prom_translation prom_trans[512] __read_mostly;
 unsigned int prom_trans_ents __read_mostly;
 
-/* Exported for SMP bootup purposes. */
 unsigned long kern_locked_tte_data;
 
 /* The obp translations are saved based on 8k pagesize, since obp can
@@ -938,6 +926,10 @@ int of_node_to_nid(struct device_node *dp)
 	int count, nid;
 	u64 grp;
 
+	/* This is the right thing to do on currently supported
+	 * SUN4U NUMA platforms as well, as the PCI controller does
+	 * not sit behind any particular memory controller.
+	 */
 	if (!mlgroups)
 		return -1;
 
@@ -1206,8 +1198,44 @@ out:
 	return err;
 }
 
+static int __init numa_parse_jbus(void)
+{
+	unsigned long cpu, index;
+
+	/* NUMA node id is encoded in bits 36 and higher, and there is
+	 * a 1-to-1 mapping from CPU ID to NUMA node ID.
+	 */
+	index = 0;
+	for_each_present_cpu(cpu) {
+		numa_cpu_lookup_table[cpu] = index;
+		numa_cpumask_lookup_table[index] = cpumask_of_cpu(cpu);
+		node_masks[index].mask = ~((1UL << 36UL) - 1UL);
+		node_masks[index].val = cpu << 36UL;
+
+		index++;
+	}
+	num_node_masks = index;
+
+	add_node_ranges();
+
+	for (index = 0; index < num_node_masks; index++) {
+		allocate_node_data(index);
+		node_set_online(index);
+	}
+
+	return 0;
+}
+
 static int __init numa_parse_sun4u(void)
 {
+	if (tlb_type == cheetah || tlb_type == cheetah_plus) {
+		unsigned long ver;
+
+		__asm__ ("rdpr %%ver, %0" : "=r" (ver));
+		if ((ver >> 32UL) == __JALAPENO_ID ||
+		    (ver >> 32UL) == __SERRANO_ID)
+			return numa_parse_jbus();
+	}
 	return -1;
 }
 
@@ -1633,8 +1661,6 @@ void __cpuinit sun4v_ktsb_register(void)
 
 /* paging_init() sets up the page tables */
 
-extern void central_probe(void);
-
 static unsigned long last_valid_pfn;
 pgd_t swapper_pg_dir[2048];
 
@@ -1679,8 +1705,6 @@ void __init paging_init(void)
 	kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
 	kern_size = (unsigned long)&_end - (unsigned long)KERNBASE;
 
-	sstate_booting();
-
 	/* Invalidate both kernel TSBs.  */
 	memset(swapper_tsb, 0x40, sizeof(swapper_tsb));
 #ifndef CONFIG_DEBUG_PAGEALLOC
@@ -1803,9 +1827,6 @@ void __init paging_init(void)
 	}
 
 	printk("Booting Linux...\n");
-
-	central_probe();
-	cpu_probe();
 }
 
 int __init page_in_phys_avail(unsigned long paddr)
@@ -2032,7 +2053,6 @@ pgprot_t PAGE_COPY __read_mostly;
 pgprot_t PAGE_SHARED __read_mostly;
 EXPORT_SYMBOL(PAGE_SHARED);
 
-pgprot_t PAGE_EXEC __read_mostly;
 unsigned long pg_iobits __read_mostly;
 
 unsigned long _PAGE_IE __read_mostly;
@@ -2045,14 +2065,6 @@ unsigned long _PAGE_CACHE __read_mostly;
 EXPORT_SYMBOL(_PAGE_CACHE);
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
-
-#define VMEMMAP_CHUNK_SHIFT	22
-#define VMEMMAP_CHUNK		(1UL << VMEMMAP_CHUNK_SHIFT)
-#define VMEMMAP_CHUNK_MASK	~(VMEMMAP_CHUNK - 1UL)
-#define VMEMMAP_ALIGN(x)	(((x)+VMEMMAP_CHUNK-1UL)&VMEMMAP_CHUNK_MASK)
-
-#define VMEMMAP_SIZE	((((1UL << MAX_PHYSADDR_BITS) >> PAGE_SHIFT) * \
-			  sizeof(struct page *)) >> VMEMMAP_CHUNK_SHIFT)
 unsigned long vmemmap_table[VMEMMAP_SIZE];
 
 int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node)
@@ -2136,7 +2148,6 @@ static void __init sun4u_pgprot_init(void)
 				       _PAGE_CACHE_4U | _PAGE_P_4U |
 				       __ACCESS_BITS_4U | __DIRTY_BITS_4U |
 				       _PAGE_EXEC_4U | _PAGE_L_4U);
-	PAGE_EXEC = __pgprot(_PAGE_EXEC_4U);
 
 	_PAGE_IE = _PAGE_IE_4U;
 	_PAGE_E = _PAGE_E_4U;
@@ -2147,10 +2158,10 @@ static void __init sun4u_pgprot_init(void)
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	kern_linear_pte_xor[0] = (_PAGE_VALID | _PAGE_SZBITS_4U) ^
-		0xfffff80000000000;
+		0xfffff80000000000UL;
 #else
 	kern_linear_pte_xor[0] = (_PAGE_VALID | _PAGE_SZ4MB_4U) ^
-		0xfffff80000000000;
+		0xfffff80000000000UL;
 #endif
 	kern_linear_pte_xor[0] |= (_PAGE_CP_4U | _PAGE_CV_4U |
 				   _PAGE_P_4U | _PAGE_W_4U);
@@ -2188,7 +2199,6 @@ static void __init sun4v_pgprot_init(void)
 				__ACCESS_BITS_4V | __DIRTY_BITS_4V |
 				_PAGE_EXEC_4V);
 	PAGE_KERNEL_LOCKED = PAGE_KERNEL;
-	PAGE_EXEC = __pgprot(_PAGE_EXEC_4V);
 
 	_PAGE_IE = _PAGE_IE_4V;
 	_PAGE_E = _PAGE_E_4V;
@@ -2196,20 +2206,20 @@ static void __init sun4v_pgprot_init(void)
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	kern_linear_pte_xor[0] = (_PAGE_VALID | _PAGE_SZBITS_4V) ^
-		0xfffff80000000000;
+		0xfffff80000000000UL;
 #else
 	kern_linear_pte_xor[0] = (_PAGE_VALID | _PAGE_SZ4MB_4V) ^
-		0xfffff80000000000;
+		0xfffff80000000000UL;
 #endif
 	kern_linear_pte_xor[0] |= (_PAGE_CP_4V | _PAGE_CV_4V |
 				   _PAGE_P_4V | _PAGE_W_4V);
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	kern_linear_pte_xor[1] = (_PAGE_VALID | _PAGE_SZBITS_4V) ^
-		0xfffff80000000000;
+		0xfffff80000000000UL;
 #else
 	kern_linear_pte_xor[1] = (_PAGE_VALID | _PAGE_SZ256MB_4V) ^
-		0xfffff80000000000;
+		0xfffff80000000000UL;
 #endif
 	kern_linear_pte_xor[1] |= (_PAGE_CP_4V | _PAGE_CV_4V |
 				   _PAGE_P_4V | _PAGE_W_4V);
diff --git a/arch/sparc64/mm/init.h b/arch/sparc64/mm/init.h
new file mode 100644
index 0000000..1606387
--- /dev/null
+++ b/arch/sparc64/mm/init.h
@@ -0,0 +1,49 @@
+#ifndef _SPARC64_MM_INIT_H
+#define _SPARC64_MM_INIT_H
+
+/* Most of the symbols in this file are defined in init.c and
+ * marked non-static so that assembler code can get at them.
+ */
+
+#define MAX_PHYS_ADDRESS	(1UL << 42UL)
+#define KPTE_BITMAP_CHUNK_SZ	(256UL * 1024UL * 1024UL)
+#define KPTE_BITMAP_BYTES	\
+	((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8)
+
+extern unsigned long kern_linear_pte_xor[2];
+extern unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)];
+extern unsigned int sparc64_highest_unlocked_tlb_ent;
+extern unsigned long sparc64_kern_pri_context;
+extern unsigned long sparc64_kern_pri_nuc_bits;
+extern unsigned long sparc64_kern_sec_context;
+extern void mmu_info(struct seq_file *m);
+
+struct linux_prom_translation {
+	unsigned long virt;
+	unsigned long size;
+	unsigned long data;
+};
+
+/* Exported for kernel TLB miss handling in ktlb.S */
+extern struct linux_prom_translation prom_trans[512];
+extern unsigned int prom_trans_ents;
+
+/* Exported for SMP bootup purposes. */
+extern unsigned long kern_locked_tte_data;
+
+extern void prom_world(int enter);
+
+extern void free_initmem(void);
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+#define VMEMMAP_CHUNK_SHIFT	22
+#define VMEMMAP_CHUNK		(1UL << VMEMMAP_CHUNK_SHIFT)
+#define VMEMMAP_CHUNK_MASK	~(VMEMMAP_CHUNK - 1UL)
+#define VMEMMAP_ALIGN(x)	(((x)+VMEMMAP_CHUNK-1UL)&VMEMMAP_CHUNK_MASK)
+
+#define VMEMMAP_SIZE	((((1UL << MAX_PHYSADDR_BITS) >> PAGE_SHIFT) * \
+			  sizeof(struct page *)) >> VMEMMAP_CHUNK_SHIFT)
+extern unsigned long vmemmap_table[VMEMMAP_SIZE];
+#endif
+
+#endif /* _SPARC64_MM_INIT_H */
diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c
index ae24919..d8f21e2 100644
--- a/arch/sparc64/mm/tlb.c
+++ b/arch/sparc64/mm/tlb.c
@@ -19,7 +19,7 @@
 
 /* Heavily inspired by the ppc64 code.  */
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) = { 0, };
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
 void flush_tlb_pending(void)
 {
diff --git a/arch/sparc64/oprofile/init.c b/arch/sparc64/oprofile/init.c
index 9ab815b..17bb603 100644
--- a/arch/sparc64/oprofile/init.c
+++ b/arch/sparc64/oprofile/init.c
@@ -12,7 +12,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
  
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	return -ENODEV;
 }
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
deleted file mode 100644
index 6976812..0000000
--- a/arch/um/Kconfig
+++ /dev/null
@@ -1,269 +0,0 @@
-config DEFCONFIG_LIST
-	string
-	option defconfig_list
-	default "arch/$ARCH/defconfig"
-
-# UML uses the generic IRQ subsystem
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config UML
-	bool
-	default y
-
-config MMU
-	bool
-	default y
-
-config NO_IOMEM
-	def_bool y
-
-mainmenu "Linux/Usermode Kernel Configuration"
-
-config ISA
-	bool
-
-config SBUS
-	bool
-
-config PCI
-	bool
-
-config PCMCIA
-	bool
-
-# Yet to do!
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default n
-
-config LOCKDEP_SUPPORT
-	bool
-	default y
-
-config STACKTRACE_SUPPORT
-	bool
-	default n
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_BUG
-	bool
-	default y
-	depends on BUG
-
-config GENERIC_TIME
-	bool
-	default y
-
-config GENERIC_CLOCKEVENTS
-	bool
-	default y
-
-# Used in kernel/irq/manage.c and include/linux/irq.h
-config IRQ_RELEASE_METHOD
-	bool
-	default y
-
-config HZ
-	int
-	default 100
-
-menu "UML-specific options"
-
-config STATIC_LINK
-	bool "Force a static link"
-	default n
-	help
-	  This option gives you the ability to force a static link of UML.
-	  Normally, UML is linked as a shared binary.  This is inconvenient for
-	  use in a chroot jail.  So, if you intend to run UML inside a chroot,
-	  you probably want to say Y here.
-	  Additionally, this option enables using higher memory spaces (up to
-	  2.75G) for UML.
-
-source "arch/um/Kconfig.arch"
-source "mm/Kconfig"
-source "kernel/time/Kconfig"
-
-config LD_SCRIPT_STATIC
-	bool
-	default y
-	depends on STATIC_LINK
-
-config LD_SCRIPT_DYN
-	bool
-	default y
-	depends on !LD_SCRIPT_STATIC
-
-source "fs/Kconfig.binfmt"
-
-config HOSTFS
-	tristate "Host filesystem"
-	help
-          While the User-Mode Linux port uses its own root file system for
-          booting and normal file access, this module lets the UML user
-          access files stored on the host.  It does not require any
-          network connection between the Host and UML.  An example use of
-          this might be:
-
-          mount none /tmp/fromhost -t hostfs -o /tmp/umlshare
-
-          where /tmp/fromhost is an empty directory inside UML and
-          /tmp/umlshare is a directory on the host with files the UML user
-          wishes to access.
-
-          For more information, see
-          <http://user-mode-linux.sourceforge.net/hostfs.html>.
-
-          If you'd like to be able to work with files stored on the host,
-          say Y or M here; otherwise say N.
-
-config HPPFS
-	tristate "HoneyPot ProcFS (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
-	  entries to be overridden, removed, or fabricated from the host.
-	  Its purpose is to allow a UML to appear to be a physical machine
-	  by removing or changing anything in /proc which gives away the
-	  identity of a UML.
-
-	  See <http://user-mode-linux.sf.net/old/hppfs.html> for more information.
-
-	  You only need this if you are setting up a UML honeypot.  Otherwise,
-	  it is safe to say 'N' here.
-
-config MCONSOLE
-	bool "Management console"
-	default y
-	help
-          The user mode linux management console is a low-level interface to
-          the kernel, somewhat like the i386 SysRq interface.  Since there is
-          a full-blown operating system running under every user mode linux
-          instance, there is much greater flexibility possible than with the
-          SysRq mechanism.
-
-          If you answer 'Y' to this option, to use this feature, you need the
-          mconsole client (called uml_mconsole) which is present in CVS in
-          2.4.5-9um and later (path /tools/mconsole), and is also in the
-          distribution RPM package in 2.4.6 and later.
-
-          It is safe to say 'Y' here.
-
-config MAGIC_SYSRQ
-	bool "Magic SysRq key"
-	depends on MCONSOLE
-	help
-	  If you say Y here, you will have some control over the system even
-	  if the system crashes for example during kernel debugging (e.g., you
-	  will be able to flush the buffer cache to disk, reboot the system
-	  immediately or dump some status information). A key for each of the
-	  possible requests is provided.
-
-	  This is the feature normally accomplished by pressing a key
-	  while holding SysRq (Alt+PrintScreen).
-
-	  On UML, this is accomplished by sending a "sysrq" command with
-	  mconsole, followed by the letter for the requested command.
-
-	  The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
-	  unless you really know what this hack does.
-
-config SMP
-	bool "Symmetric multi-processing support (EXPERIMENTAL)"
-	default n
-	depends on BROKEN
-	help
-	  This option enables UML SMP support.
-	  It is NOT related to having a real SMP box. Not directly, at least.
-
-	  UML implements virtual SMP by allowing as many processes to run
-	  simultaneously on the host as there are virtual processors configured.
-
-	  Obviously, if the host is a uniprocessor, those processes will
-	  timeshare, but, inside UML, will appear to be running simultaneously.
-	  If the host is a multiprocessor, then UML processes may run
-	  simultaneously, depending on the host scheduler.
-
-	  This, however, is supported only in TT mode. So, if you use the SKAS
-	  patch on your host, switching to TT mode and enabling SMP usually
-	  gives	you worse performances.
-	  Also, since the support for SMP has been under-developed, there could
-	  be some bugs being exposed by enabling SMP.
-
-	  If you don't know what to do, say N.
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-32)"
-	range 2 32
-	depends on SMP
-	default "32"
-
-config HIGHMEM
-	bool "Highmem support (EXPERIMENTAL)"
-	depends on !64BIT && EXPERIMENTAL
-	default n
-	help
-	  This was used to allow UML to run with big amounts of memory.
-	  Currently it is unstable, so if unsure say N.
-
-	  To use big amounts of memory, it is recommended enable static
-	  linking (i.e. CONFIG_STATIC_LINK) - this should allow the
-	  guest to use up to 2.75G of memory.
-
-config KERNEL_STACK_ORDER
-	int "Kernel stack size order"
-	default 1 if 64BIT
-	range 1 10 if 64BIT
-	default 0 if !64BIT
-	help
-	  This option determines the size of UML kernel stacks.  They will
-	  be 1 << order pages.  The default is OK unless you're running Valgrind
-	  on UML, in which case, set this to 3.
-
-endmenu
-
-source "init/Kconfig"
-
-source "drivers/block/Kconfig"
-
-source "arch/um/Kconfig.char"
-
-source "drivers/base/Kconfig"
-
-source "net/Kconfig"
-
-source "arch/um/Kconfig.net"
-
-source "drivers/net/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-source "fs/Kconfig"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/md/Kconfig"
-
-if BROKEN
-	source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/leds/Kconfig"
-
-#This is just to shut up some Kconfig warnings, so no prompt.
-config INPUT
-	bool
-	default n
-
-source "arch/um/Kconfig.debug"
diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char
index 1b238eb..70dabd1 100644
--- a/arch/um/Kconfig.char
+++ b/arch/um/Kconfig.char
@@ -203,6 +203,10 @@ config SOUND
 	tristate
 	default UML_SOUND
 
+config SOUND_OSS_CORE
+	bool
+	default UML_SOUND
+
 config HOSTAUDIO
 	tristate
 	default UML_SOUND
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
new file mode 100644
index 0000000..0d207e7
--- /dev/null
+++ b/arch/um/Kconfig.common
@@ -0,0 +1,77 @@
+config DEFCONFIG_LIST
+	string
+	option defconfig_list
+	default "arch/$ARCH/defconfig"
+
+# UML uses the generic IRQ subsystem
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config UML
+	bool
+	default y
+
+config MMU
+	bool
+	default y
+
+config NO_IOMEM
+	def_bool y
+
+mainmenu "Linux/Usermode Kernel Configuration"
+
+config ISA
+	bool
+
+config SBUS
+	bool
+
+config PCI
+	bool
+
+config PCMCIA
+	bool
+
+# Yet to do!
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default n
+
+config LOCKDEP_SUPPORT
+	bool
+	default y
+
+config STACKTRACE_SUPPORT
+	bool
+	default n
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config GENERIC_BUG
+	bool
+	default y
+	depends on BUG
+
+config GENERIC_TIME
+	bool
+	default y
+
+config GENERIC_CLOCKEVENTS
+	bool
+	default y
+
+# Used in kernel/irq/manage.c and include/linux/irq.h
+config IRQ_RELEASE_METHOD
+	bool
+	default y
+
+config HZ
+	int
+	default 100
+
+config SUBARCH
+	string
+	option env="SUBARCH"
diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386
deleted file mode 100644
index e09edfa..0000000
--- a/arch/um/Kconfig.i386
+++ /dev/null
@@ -1,47 +0,0 @@
-menu "Host processor type and features"
-
-source "arch/x86/Kconfig.cpu"
-
-endmenu
-
-config UML_X86
-	bool
-	default y
-
-config X86_32
-       bool
-       default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	def_bool y
-
-config 64BIT
-	bool
-	default n
-
-config 3_LEVEL_PGTABLES
-	bool "Three-level pagetables (EXPERIMENTAL)"
-	default n
-	depends on EXPERIMENTAL
-	help
-	Three-level pagetables will let UML have more than 4G of physical
-	memory.  All the memory that can't be mapped directly will be treated
-	as high memory.
-
-	However, this it experimental on 32-bit architectures, so if unsure say
-	N (on x86-64 it's automatically enabled, instead, as it's safe there).
-
-config ARCH_HAS_SC_SIGNALS
-	bool
-	default y
-
-config ARCH_REUSE_HOST_VSYSCALL_AREA
-	bool
-	default y
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config ARCH_SUPPORTS_AOUT
-	def_bool y
diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest
new file mode 100644
index 0000000..7b5cea7
--- /dev/null
+++ b/arch/um/Kconfig.rest
@@ -0,0 +1,42 @@
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+source "drivers/block/Kconfig"
+
+source "arch/um/Kconfig.char"
+
+source "drivers/base/Kconfig"
+
+source "net/Kconfig"
+
+source "arch/um/Kconfig.net"
+
+source "drivers/net/Kconfig"
+
+source "drivers/connector/Kconfig"
+
+source "fs/Kconfig"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+source "drivers/scsi/Kconfig"
+
+source "drivers/md/Kconfig"
+
+if BROKEN
+	source "drivers/mtd/Kconfig"
+endif
+
+source "drivers/leds/Kconfig"
+
+#This is just to shut up some Kconfig warnings, so no prompt.
+config INPUT
+	bool
+	default n
+
+source "arch/um/Kconfig.debug"
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
new file mode 100644
index 0000000..ec2b8da
--- /dev/null
+++ b/arch/um/Kconfig.um
@@ -0,0 +1,149 @@
+config STATIC_LINK
+	bool "Force a static link"
+	default n
+	help
+	  This option gives you the ability to force a static link of UML.
+	  Normally, UML is linked as a shared binary.  This is inconvenient for
+	  use in a chroot jail.  So, if you intend to run UML inside a chroot,
+	  you probably want to say Y here.
+	  Additionally, this option enables using higher memory spaces (up to
+	  2.75G) for UML.
+
+source "mm/Kconfig"
+source "kernel/time/Kconfig"
+
+config LD_SCRIPT_STATIC
+	bool
+	default y
+	depends on STATIC_LINK
+
+config LD_SCRIPT_DYN
+	bool
+	default y
+	depends on !LD_SCRIPT_STATIC
+
+source "fs/Kconfig.binfmt"
+
+config HOSTFS
+	tristate "Host filesystem"
+	help
+          While the User-Mode Linux port uses its own root file system for
+          booting and normal file access, this module lets the UML user
+          access files stored on the host.  It does not require any
+          network connection between the Host and UML.  An example use of
+          this might be:
+
+          mount none /tmp/fromhost -t hostfs -o /tmp/umlshare
+
+          where /tmp/fromhost is an empty directory inside UML and
+          /tmp/umlshare is a directory on the host with files the UML user
+          wishes to access.
+
+          For more information, see
+          <http://user-mode-linux.sourceforge.net/hostfs.html>.
+
+          If you'd like to be able to work with files stored on the host,
+          say Y or M here; otherwise say N.
+
+config HPPFS
+	tristate "HoneyPot ProcFS (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
+	  entries to be overridden, removed, or fabricated from the host.
+	  Its purpose is to allow a UML to appear to be a physical machine
+	  by removing or changing anything in /proc which gives away the
+	  identity of a UML.
+
+	  See <http://user-mode-linux.sf.net/old/hppfs.html> for more information.
+
+	  You only need this if you are setting up a UML honeypot.  Otherwise,
+	  it is safe to say 'N' here.
+
+config MCONSOLE
+	bool "Management console"
+	default y
+	help
+          The user mode linux management console is a low-level interface to
+          the kernel, somewhat like the i386 SysRq interface.  Since there is
+          a full-blown operating system running under every user mode linux
+          instance, there is much greater flexibility possible than with the
+          SysRq mechanism.
+
+          If you answer 'Y' to this option, to use this feature, you need the
+          mconsole client (called uml_mconsole) which is present in CVS in
+          2.4.5-9um and later (path /tools/mconsole), and is also in the
+          distribution RPM package in 2.4.6 and later.
+
+          It is safe to say 'Y' here.
+
+config MAGIC_SYSRQ
+	bool "Magic SysRq key"
+	depends on MCONSOLE
+	help
+	  If you say Y here, you will have some control over the system even
+	  if the system crashes for example during kernel debugging (e.g., you
+	  will be able to flush the buffer cache to disk, reboot the system
+	  immediately or dump some status information). A key for each of the
+	  possible requests is provided.
+
+	  This is the feature normally accomplished by pressing a key
+	  while holding SysRq (Alt+PrintScreen).
+
+	  On UML, this is accomplished by sending a "sysrq" command with
+	  mconsole, followed by the letter for the requested command.
+
+	  The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+	  unless you really know what this hack does.
+
+config SMP
+	bool "Symmetric multi-processing support (EXPERIMENTAL)"
+	default n
+	depends on BROKEN
+	help
+	  This option enables UML SMP support.
+	  It is NOT related to having a real SMP box. Not directly, at least.
+
+	  UML implements virtual SMP by allowing as many processes to run
+	  simultaneously on the host as there are virtual processors configured.
+
+	  Obviously, if the host is a uniprocessor, those processes will
+	  timeshare, but, inside UML, will appear to be running simultaneously.
+	  If the host is a multiprocessor, then UML processes may run
+	  simultaneously, depending on the host scheduler.
+
+	  This, however, is supported only in TT mode. So, if you use the SKAS
+	  patch on your host, switching to TT mode and enabling SMP usually
+	  gives	you worse performances.
+	  Also, since the support for SMP has been under-developed, there could
+	  be some bugs being exposed by enabling SMP.
+
+	  If you don't know what to do, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	depends on SMP
+	default "32"
+
+config HIGHMEM
+	bool "Highmem support (EXPERIMENTAL)"
+	depends on !64BIT && EXPERIMENTAL
+	default n
+	help
+	  This was used to allow UML to run with big amounts of memory.
+	  Currently it is unstable, so if unsure say N.
+
+	  To use big amounts of memory, it is recommended enable static
+	  linking (i.e. CONFIG_STATIC_LINK) - this should allow the
+	  guest to use up to 2.75G of memory.
+
+config KERNEL_STACK_ORDER
+	int "Kernel stack size order"
+	default 1 if 64BIT
+	range 1 10 if 64BIT
+	default 0 if !64BIT
+	help
+	  This option determines the size of UML kernel stacks.  They will
+	  be 1 << order pages.  The default is OK unless you're running Valgrind
+	  on UML, in which case, set this to 3.
diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86
new file mode 100644
index 0000000..5ee3280
--- /dev/null
+++ b/arch/um/Kconfig.x86
@@ -0,0 +1,56 @@
+source "arch/um/Kconfig.common"
+
+menu "UML-specific options"
+
+menu "Host processor type and features"
+
+source "arch/x86/Kconfig.cpu"
+
+endmenu
+
+config UML_X86
+	def_bool y
+
+config 64BIT
+	bool
+	default SUBARCH = "x86_64"
+
+config X86_32
+	def_bool !64BIT
+	select HAVE_AOUT
+
+config RWSEM_XCHGADD_ALGORITHM
+	def_bool X86_XADD
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool !X86_XADD
+
+config 3_LEVEL_PGTABLES
+	bool "Three-level pagetables (EXPERIMENTAL)" if !64BIT
+	default 64BIT
+	depends on EXPERIMENTAL
+	help
+	Three-level pagetables will let UML have more than 4G of physical
+	memory.  All the memory that can't be mapped directly will be treated
+	as high memory.
+
+	However, this it experimental on 32-bit architectures, so if unsure say
+	N (on x86-64 it's automatically enabled, instead, as it's safe there).
+
+config ARCH_HAS_SC_SIGNALS
+	def_bool !64BIT
+
+config ARCH_REUSE_HOST_VSYSCALL_AREA
+	def_bool !64BIT
+
+config SMP_BROKEN
+	def_bool 64BIT
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+source "arch/um/Kconfig.um"
+
+endmenu
+
+source "arch/um/Kconfig.rest"
diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64
deleted file mode 100644
index 5696e7b..0000000
--- a/arch/um/Kconfig.x86_64
+++ /dev/null
@@ -1,42 +0,0 @@
-
-menu "Host processor type and features"
-
-source "arch/x86/Kconfig.cpu"
-
-endmenu
-
-config UML_X86
-	bool
-	default y
-
-config 64BIT
-	bool
-	default y
-
-#XXX: this is so in the underlying arch, but it's wrong!!!
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
-config 3_LEVEL_PGTABLES
-       bool
-       default y
-
-config ARCH_HAS_SC_SIGNALS
-	bool
-	default n
-
-config ARCH_REUSE_HOST_VSYSCALL_AREA
-	bool
-	default n
-
-config SMP_BROKEN
-	bool
-	default y
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config ARCH_SUPPORTS_AOUT
-	def_bool y
diff --git a/arch/um/Makefile b/arch/um/Makefile
index ca40397..d944c34 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -18,28 +18,16 @@ core-y			+= $(ARCH_DIR)/kernel/		\
 			   $(ARCH_DIR)/drivers/		\
 			   $(ARCH_DIR)/os-$(OS)/
 
-# Have to precede the include because the included Makefiles reference them.
-SYMLINK_HEADERS := archparam.h system.h sigcontext.h processor.h ptrace.h \
-	module.h vm-flags.h elf.h host_ldt.h
-SYMLINK_HEADERS := $(foreach header,$(SYMLINK_HEADERS),include/asm-um/$(header))
-
-# XXX: The "os" symlink is only used by arch/um/include/os.h, which includes
-# ../os/include/file.h
-#
-# These are cleaned up during mrproper. Please DO NOT fix it again, this is
-# the Correct Thing(tm) to do!
-ARCH_SYMLINKS = include/asm-um/arch $(ARCH_DIR)/include/sysdep $(ARCH_DIR)/os \
-	$(SYMLINK_HEADERS) $(ARCH_DIR)/include/uml-config.h
-
-MODE_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/include/skas
+MODE_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/include/shared/skas
 
 include $(srctree)/$(ARCH_DIR)/Makefile-skas
 
-ARCH_INCLUDE	:= -I$(ARCH_DIR)/include
+ARCH_INCLUDE	:= -I$(srctree)/$(ARCH_DIR)/include/shared
+ARCH_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)/shared
 ifneq ($(KBUILD_SRC),)
-ARCH_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/include
+ARCH_INCLUDE	+= -I$(ARCH_DIR)/include/shared # for two generated files
 endif
-SYS_DIR		:= $(ARCH_DIR)/include/sysdep-$(SUBARCH)
+KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)
 
 # -Dvmap=kernel_vmap prevents anything from referencing the libpcap.o symbol so
 # named - it's a common symbol in libpcap, so we get a binary which crashes.
@@ -65,6 +53,8 @@ include $(srctree)/$(ARCH_DIR)/Makefile-$(SUBARCH)
 #This will adjust *FLAGS accordingly to the platform.
 include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)
 
+KBUILD_CPPFLAGS += -I$(srctree)/arch/$(HEADER_ARCH)/include
+
 # -Derrno=kernel_errno - This turns all kernel references to errno into
 # kernel_errno to separate them from the libc errno.  This allows -fno-common
 # in KBUILD_CFLAGS.  Otherwise, it would cause ld to complain about the two different
@@ -93,14 +83,10 @@ define archhelp
   echo '		   find in the kernel root.'
 endef
 
-ifneq ($(KBUILD_SRC),)
-$(shell mkdir -p $(ARCH_DIR) && ln -fsn $(srctree)/$(ARCH_DIR)/Kconfig.$(SUBARCH) $(ARCH_DIR)/Kconfig.arch)
-else
-$(shell cd $(ARCH_DIR) && ln -sf Kconfig.$(SUBARCH) Kconfig.arch)
-endif
+KBUILD_KCONFIG := arch/um/Kconfig.$(HEADER_ARCH)
 
-archprepare: $(ARCH_SYMLINKS) $(ARCH_DIR)/include/user_constants.h
-prepare: $(ARCH_DIR)/include/kern_constants.h
+archprepare: $(ARCH_DIR)/include/shared/user_constants.h
+prepare: $(ARCH_DIR)/include/shared/kern_constants.h
 
 LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
 LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib
@@ -132,62 +118,19 @@ endef
 
 # When cleaning we don't include .config, so we don't include
 # TT or skas makefiles and don't clean skas_ptregs.h.
-CLEAN_FILES += linux x.i gmon.out $(ARCH_DIR)/include/uml-config.h \
-	$(ARCH_DIR)/include/user_constants.h \
-	$(ARCH_DIR)/include/kern_constants.h $(ARCH_DIR)/Kconfig.arch
-
-MRPROPER_FILES += $(ARCH_SYMLINKS)
+CLEAN_FILES += linux x.i gmon.out \
+	$(ARCH_DIR)/include/shared/user_constants.h \
+	$(ARCH_DIR)/include/shared/kern_constants.h
 
 archclean:
 	@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
 		-o -name '*.gcov' \) -type f -print | xargs rm -f
 
-$(SYMLINK_HEADERS):
-	@echo '  SYMLINK $@'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p $(objtree)/include/asm-um
-	$(Q)ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
-else
-	$(Q)cd $(srctree)/$(dir $@) ; \
-	ln -sf $(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $(notdir $@)
-endif
-
-include/asm-um/arch:
-	@echo '  SYMLINK $@'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p $(objtree)/include/asm-um
-	$(Q)ln -fsn $(srctree)/include/asm-$(HEADER_ARCH) include/asm-um/arch
-else
-	$(Q)cd $(srctree)/include/asm-um && ln -fsn ../asm-$(HEADER_ARCH) arch
-endif
-
-$(objtree)/$(ARCH_DIR)/include:
+$(objtree)/$(ARCH_DIR)/include/shared:
 	@echo '  MKDIR $@'
 	$(Q)mkdir -p $@
 
-$(ARCH_DIR)/include/sysdep: $(objtree)/$(ARCH_DIR)/include
-	@echo '  SYMLINK $@'
-ifneq ($(KBUILD_SRC),)
-	$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/include/sysdep-$(SUBARCH) $(ARCH_DIR)/include/sysdep
-else
-	$(Q)cd $(ARCH_DIR)/include && ln -fsn sysdep-$(SUBARCH) sysdep
-endif
-
-$(ARCH_DIR)/os:
-	@echo '  SYMLINK $@'
-ifneq ($(KBUILD_SRC),)
-	$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/os-$(OS) $(ARCH_DIR)/os
-else
-	$(Q)cd $(ARCH_DIR) && ln -fsn os-$(OS) os
-endif
-
 # Generated files
-define filechk_umlconfig
-	sed 's/ CONFIG/ UML_CONFIG/'
-endef
-
-$(ARCH_DIR)/include/uml-config.h : include/linux/autoconf.h
-	$(call filechk,umlconfig)
 
 $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s: FORCE
 	$(Q)$(MAKE) $(build)=$(ARCH_DIR)/sys-$(SUBARCH) $@
@@ -205,11 +148,11 @@ define filechk_gen-asm-offsets
          echo ""; )
 endef
 
-$(ARCH_DIR)/include/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s
+$(ARCH_DIR)/include/shared/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s
 	$(call filechk,gen-asm-offsets)
 
-$(ARCH_DIR)/include/kern_constants.h: $(objtree)/$(ARCH_DIR)/include
+$(ARCH_DIR)/include/shared/kern_constants.h: $(objtree)/$(ARCH_DIR)/include/shared
 	@echo '  SYMLINK $@'
-	$(Q)ln -sf ../../../include/asm-um/asm-offsets.h $@
+	$(Q)ln -sf ../../../../include/asm/asm-offsets.h $@
 
-export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS HEADER_ARCH
+export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS HEADER_ARCH DEV_NULL_PATH
diff --git a/arch/um/Makefile-os-Linux b/arch/um/Makefile-os-Linux
index 5285948..2c8a598 100644
--- a/arch/um/Makefile-os-Linux
+++ b/arch/um/Makefile-os-Linux
@@ -6,3 +6,4 @@
 # To get a definition of F_SETSIG
 USER_CFLAGS += -D_GNU_SOURCE -D_LARGEFILE64_SOURCE
 KBUILD_CFLAGS += -D_LARGEFILE64_SOURCE
+DEV_NULL_PATH = \"/dev/null\"
diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile
index d283e7b..1d9b6ae 100644
--- a/arch/um/drivers/Makefile
+++ b/arch/um/drivers/Makefile
@@ -62,5 +62,6 @@ obj-$(CONFIG_UML_RANDOM) += random.o
 
 # pcap_user.o must be added explicitly.
 USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o pcap_user.o vde_user.o
+CFLAGS_null.o = -DDEV_NULL=$(DEV_NULL_PATH)
 
 include arch/um/scripts/Makefile.rules
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index d741f35..14a102e 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -275,6 +275,8 @@ int line_ioctl(struct tty_struct *tty, struct file * file,
 	case TIOCGLTC:
 	case TIOCSLTC:
 #endif
+	/* Note: these are out of date as we now have TCGETS2 etc but this
+	   whole lot should probably go away */
 	case TCGETS:
 	case TCSETSF:
 	case TCSETSW:
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index b58fb89..0a86811 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -98,9 +98,9 @@ static inline void ubd_set_bit(__u64 bit, unsigned char *data)
 
 static DEFINE_MUTEX(ubd_lock);
 
-static int ubd_open(struct inode * inode, struct file * filp);
-static int ubd_release(struct inode * inode, struct file * file);
-static int ubd_ioctl(struct inode * inode, struct file * file,
+static int ubd_open(struct block_device *bdev, fmode_t mode);
+static int ubd_release(struct gendisk *disk, fmode_t mode);
+static int ubd_ioctl(struct block_device *bdev, fmode_t mode,
 		     unsigned int cmd, unsigned long arg);
 static int ubd_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
@@ -1112,9 +1112,9 @@ static int __init ubd_driver_init(void){
 
 device_initcall(ubd_driver_init);
 
-static int ubd_open(struct inode *inode, struct file *filp)
+static int ubd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct gendisk *disk = bdev->bd_disk;
 	struct ubd *ubd_dev = disk->private_data;
 	int err = 0;
 
@@ -1131,7 +1131,7 @@ static int ubd_open(struct inode *inode, struct file *filp)
 
 	/* This should no more be needed. And it didn't work anyway to exclude
 	 * read-write remounting of filesystems.*/
-	/*if((filp->f_mode & FMODE_WRITE) && !ubd_dev->openflags.w){
+	/*if((mode & FMODE_WRITE) && !ubd_dev->openflags.w){
 	        if(--ubd_dev->count == 0) ubd_close_dev(ubd_dev);
 	        err = -EROFS;
 	}*/
@@ -1139,9 +1139,8 @@ static int ubd_open(struct inode *inode, struct file *filp)
 	return err;
 }
 
-static int ubd_release(struct inode * inode, struct file * file)
+static int ubd_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct ubd *ubd_dev = disk->private_data;
 
 	if(--ubd_dev->count == 0)
@@ -1306,10 +1305,10 @@ static int ubd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 	return 0;
 }
 
-static int ubd_ioctl(struct inode * inode, struct file * file,
+static int ubd_ioctl(struct block_device *bdev, fmode_t mode,
 		     unsigned int cmd, unsigned long arg)
 {
-	struct ubd *ubd_dev = inode->i_bdev->bd_disk->private_data;
+	struct ubd *ubd_dev = bdev->bd_disk->private_data;
 	struct hd_driveid ubd_id = {
 		.cyls		= 0,
 		.heads		= 128,
diff --git a/arch/um/include/as-layout.h b/arch/um/include/as-layout.h
deleted file mode 100644
index 58e852d..0000000
--- a/arch/um/include/as-layout.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __START_H__
-#define __START_H__
-
-#include "uml-config.h"
-#include "kern_constants.h"
-
-/*
- * Stolen from linux/const.h, which can't be directly included since
- * this is used in userspace code, which has no access to the kernel
- * headers.  Changed to be suitable for adding casts to the start,
- * rather than "UL" to the end.
- */
-
-/* Some constant macros are used in both assembler and
- * C code.  Therefore we cannot annotate them always with
- * 'UL' and other type specifiers unilaterally.  We
- * use the following macros to deal with this.
- */
-
-#ifdef __ASSEMBLY__
-#define _UML_AC(X, Y)	(Y)
-#else
-#define __UML_AC(X, Y)	(X(Y))
-#define _UML_AC(X, Y)	__UML_AC(X, Y)
-#endif
-
-#define STUB_START _UML_AC(, 0x100000)
-#define STUB_CODE _UML_AC((unsigned long), STUB_START)
-#define STUB_DATA _UML_AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
-#define STUB_END _UML_AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
-
-#ifndef __ASSEMBLY__
-
-#include "sysdep/ptrace.h"
-
-struct cpu_task {
-	int pid;
-	void *task;
-};
-
-extern struct cpu_task cpu_tasks[];
-
-extern unsigned long low_physmem;
-extern unsigned long high_physmem;
-extern unsigned long uml_physmem;
-extern unsigned long uml_reserved;
-extern unsigned long end_vm;
-extern unsigned long start_vm;
-extern unsigned long long highmem;
-
-extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end;
-extern unsigned long _unprotected_end;
-extern unsigned long brk_start;
-
-extern unsigned long host_task_size;
-
-extern int linux_main(int argc, char **argv);
-
-extern void (*sig_info[])(int, struct uml_pt_regs *);
-
-#endif
-
-#endif
diff --git a/arch/um/include/asm/a.out-core.h b/arch/um/include/asm/a.out-core.h
new file mode 100644
index 0000000..995643b
--- /dev/null
+++ b/arch/um/include/asm/a.out-core.h
@@ -0,0 +1,27 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef __UM_A_OUT_CORE_H
+#define __UM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *u)
+{
+}
+
+#endif /* __KERNEL__ */
+#endif /* __UM_A_OUT_CORE_H */
diff --git a/arch/um/include/asm/apic.h b/arch/um/include/asm/apic.h
new file mode 100644
index 0000000..876dee8
--- /dev/null
+++ b/arch/um/include/asm/apic.h
@@ -0,0 +1,4 @@
+#ifndef __UM_APIC_H
+#define __UM_APIC_H
+
+#endif
diff --git a/arch/um/include/asm/auxvec.h b/arch/um/include/asm/auxvec.h
new file mode 100644
index 0000000..1e5e1c2
--- /dev/null
+++ b/arch/um/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __UM_AUXVEC_H
+#define __UM_AUXVEC_H
+
+#endif
diff --git a/arch/um/include/asm/bugs.h b/arch/um/include/asm/bugs.h
new file mode 100644
index 0000000..6a72e24
--- /dev/null
+++ b/arch/um/include/asm/bugs.h
@@ -0,0 +1,6 @@
+#ifndef __UM_BUGS_H
+#define __UM_BUGS_H
+
+void check_bugs(void);
+
+#endif
diff --git a/arch/um/include/asm/cache.h b/arch/um/include/asm/cache.h
new file mode 100644
index 0000000..19e1bdd
--- /dev/null
+++ b/arch/um/include/asm/cache.h
@@ -0,0 +1,17 @@
+#ifndef __UM_CACHE_H
+#define __UM_CACHE_H
+
+
+#if defined(CONFIG_UML_X86) && !defined(CONFIG_64BIT)
+# define L1_CACHE_SHIFT		(CONFIG_X86_L1_CACHE_SHIFT)
+#elif defined(CONFIG_UML_X86) /* 64-bit */
+# define L1_CACHE_SHIFT		6 /* Should be 7 on Intel */
+#else
+/* XXX: this was taken from x86, now it's completely random. Luckily only
+ * affects SMP padding. */
+# define L1_CACHE_SHIFT		5
+#endif
+
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#endif
diff --git a/arch/um/include/asm/checksum.h b/arch/um/include/asm/checksum.h
new file mode 100644
index 0000000..5b50136
--- /dev/null
+++ b/arch/um/include/asm/checksum.h
@@ -0,0 +1,6 @@
+#ifndef __UM_CHECKSUM_H
+#define __UM_CHECKSUM_H
+
+#include "sysdep/checksum.h"
+
+#endif
diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
new file mode 100644
index 0000000..cb02486
--- /dev/null
+++ b/arch/um/include/asm/common.lds.S
@@ -0,0 +1,130 @@
+#include <asm-generic/vmlinux.lds.h>
+
+  .fini      : { *(.fini)    } =0x9090
+  _etext = .;
+  PROVIDE (etext = .);
+
+  . = ALIGN(4096);
+  _sdata = .;
+  PROVIDE (sdata = .);
+
+  RODATA
+
+  .unprotected : { *(.unprotected) }
+  . = ALIGN(4096);
+  PROVIDE (_unprotected_end = .);
+
+  . = ALIGN(4096);
+  .note : { *(.note.*) }
+  __ex_table : {
+	__start___ex_table = .;
+	*(__ex_table)
+	__stop___ex_table = .;
+  }
+
+  BUG_TABLE
+
+  .uml.setup.init : {
+	__uml_setup_start = .;
+	*(.uml.setup.init)
+	__uml_setup_end = .;
+  }
+	
+  .uml.help.init : {
+	__uml_help_start = .;
+	*(.uml.help.init)
+	__uml_help_end = .;
+  }
+	
+  .uml.postsetup.init : {
+	__uml_postsetup_start = .;
+	*(.uml.postsetup.init)
+	__uml_postsetup_end = .;
+  }
+	
+  .init.setup : {
+	__setup_start = .;
+	*(.init.setup)
+	__setup_end = .;
+  }
+
+  . = ALIGN(32);
+  .data.percpu : {
+	__per_cpu_start = . ;
+	*(.data.percpu)
+	__per_cpu_end = . ;
+  }
+	
+  .initcall.init : {
+	__initcall_start = .;
+	INITCALLS
+	__initcall_end = .;
+  }
+
+  .con_initcall.init : {
+	__con_initcall_start = .;
+	*(.con_initcall.init)
+	__con_initcall_end = .;
+  }
+
+  .uml.initcall.init : {
+	__uml_initcall_start = .;
+	*(.uml.initcall.init)
+	__uml_initcall_end = .;
+  }
+  __init_end = .;
+
+  SECURITY_INIT
+
+  .exitcall : {
+	__exitcall_begin = .;
+	*(.exitcall.exit)
+	__exitcall_end = .;
+  }
+
+  .uml.exitcall : {
+	__uml_exitcall_begin = .;
+	*(.uml.exitcall.exit)
+	__uml_exitcall_end = .;
+  }
+
+  . = ALIGN(4);
+  .altinstructions : {
+	__alt_instructions = .;
+	*(.altinstructions)
+	__alt_instructions_end = .;
+  }
+  .altinstr_replacement : { *(.altinstr_replacement) }
+  /* .exit.text is discard at runtime, not link time, to deal with references
+     from .altinstructions and .eh_frame */
+  .exit.text : { *(.exit.text) }
+  .exit.data : { *(.exit.data) }
+
+  .preinit_array : {
+	__preinit_array_start = .;
+	*(.preinit_array)
+	__preinit_array_end = .;
+  }
+  .init_array : {
+	__init_array_start = .;
+	*(.init_array)
+	__init_array_end = .;
+  }
+  .fini_array : {
+	__fini_array_start = .;
+	*(.fini_array)
+	__fini_array_end = .;
+  }
+
+   . = ALIGN(4096);
+  .init.ramfs : {
+	__initramfs_start = .;
+	*(.init.ramfs)
+	__initramfs_end = .;
+  }
+
+  /* Sections to be discarded */
+  /DISCARD/ : {
+ 	*(.exitcall.exit)
+  }
+
diff --git a/arch/um/include/asm/cputime.h b/arch/um/include/asm/cputime.h
new file mode 100644
index 0000000..c84acba
--- /dev/null
+++ b/arch/um/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __UM_CPUTIME_H
+#define __UM_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __UM_CPUTIME_H */
diff --git a/arch/um/include/asm/current.h b/arch/um/include/asm/current.h
new file mode 100644
index 0000000..c2191d9
--- /dev/null
+++ b/arch/um/include/asm/current.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_CURRENT_H
+#define __UM_CURRENT_H
+
+#include "linux/thread_info.h"
+
+#define current (current_thread_info()->task)
+
+#endif
diff --git a/arch/um/include/asm/delay.h b/arch/um/include/asm/delay.h
new file mode 100644
index 0000000..c71e32b
--- /dev/null
+++ b/arch/um/include/asm/delay.h
@@ -0,0 +1,20 @@
+#ifndef __UM_DELAY_H
+#define __UM_DELAY_H
+
+#define MILLION 1000000
+
+/* Undefined on purpose */
+extern void __bad_udelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) ((__builtin_constant_p(n) && (n) > 20000) ? \
+	__bad_udelay() : __udelay(n))
+
+/* It appears that ndelay is not used at all for UML, and has never been
+ * implemented. */
+extern void __unimplemented_ndelay(void);
+#define ndelay(n) __unimplemented_ndelay()
+
+#endif
diff --git a/arch/um/include/asm/desc.h b/arch/um/include/asm/desc.h
new file mode 100644
index 0000000..4ec34a5
--- /dev/null
+++ b/arch/um/include/asm/desc.h
@@ -0,0 +1,16 @@
+#ifndef __UM_DESC_H
+#define __UM_DESC_H
+
+/* Taken from asm-i386/desc.h, it's the only thing we need. The rest wouldn't
+ * compile, and has never been used. */
+#define LDT_empty(info) (\
+	(info)->base_addr	== 0	&& \
+	(info)->limit		== 0	&& \
+	(info)->contents	== 0	&& \
+	(info)->read_exec_only	== 1	&& \
+	(info)->seg_32bit	== 0	&& \
+	(info)->limit_in_pages	== 0	&& \
+	(info)->seg_not_present	== 1	&& \
+	(info)->useable		== 0	)
+
+#endif
diff --git a/arch/um/include/asm/device.h b/arch/um/include/asm/device.h
new file mode 100644
index 0000000..d8f9872
--- /dev/null
+++ b/arch/um/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
new file mode 100644
index 0000000..90fc708
--- /dev/null
+++ b/arch/um/include/asm/dma-mapping.h
@@ -0,0 +1,128 @@
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <asm/scatterlist.h>
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	BUG();
+	return(0);
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	BUG();
+	return(0);
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   gfp_t flag)
+{
+	BUG();
+	return((void *) 0);
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		  dma_addr_t dma_handle)
+{
+	BUG();
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+	return(0);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG();
+	return(0);
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	BUG();
+	return(0);
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+	    enum dma_data_direction direction)
+{
+	BUG();
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h) (1)
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	BUG();
+	return(0);
+}
+
+static inline void
+dma_sync_single_range(struct device *dev, dma_addr_t dma_handle,
+		      unsigned long offset, size_t size,
+		      enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline void
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG();
+}
+
+static inline int
+dma_mapping_error(struct device *dev, dma_addr_t dma_handle)
+{
+	BUG();
+	return 0;
+}
+
+#endif
diff --git a/arch/um/include/asm/dma.h b/arch/um/include/asm/dma.h
new file mode 100644
index 0000000..9f6139a
--- /dev/null
+++ b/arch/um/include/asm/dma.h
@@ -0,0 +1,10 @@
+#ifndef __UM_DMA_H
+#define __UM_DMA_H
+
+#include "asm/io.h"
+
+extern unsigned long uml_physmem;
+
+#define MAX_DMA_ADDRESS (uml_physmem)
+
+#endif
diff --git a/arch/um/include/asm/emergency-restart.h b/arch/um/include/asm/emergency-restart.h
new file mode 100644
index 0000000..108d8c4
--- /dev/null
+++ b/arch/um/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/um/include/asm/fixmap.h b/arch/um/include/asm/fixmap.h
new file mode 100644
index 0000000..69c0252
--- /dev/null
+++ b/arch/um/include/asm/fixmap.h
@@ -0,0 +1,99 @@
+#ifndef __UM_FIXMAP_H
+#define __UM_FIXMAP_H
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/kmap_types.h>
+#include <asm/archparam.h>
+#include <asm/page.h>
+#include <linux/threads.h>
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+			  unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+
+#define FIXADDR_TOP	(TASK_SIZE - 2 * PAGE_SIZE)
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)      ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+      BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+      return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/arch/um/include/asm/futex.h b/arch/um/include/asm/futex.h
new file mode 100644
index 0000000..6a332a9
--- /dev/null
+++ b/arch/um/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/um/include/asm/hardirq.h b/arch/um/include/asm/hardirq.h
new file mode 100644
index 0000000..313ebb8
--- /dev/null
+++ b/arch/um/include/asm/hardirq.h
@@ -0,0 +1,25 @@
+/* (c) 2004 cw@f00f.org, GPLv2 blah blah */
+
+#ifndef __ASM_UM_HARDIRQ_H
+#define __ASM_UM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+/* NOTE: When SMP works again we might want to make this
+ * ____cacheline_aligned or maybe use per_cpu state? --cw */
+typedef struct {
+	unsigned int __softirq_pending;
+} irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>
+
+/* As this would be very strange for UML to get we BUG() after the
+ * printk. */
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_ERR "unexpected IRQ %02x\n", irq);
+	BUG();
+}
+
+#endif /* __ASM_UM_HARDIRQ_H */
diff --git a/arch/um/include/asm/hw_irq.h b/arch/um/include/asm/hw_irq.h
new file mode 100644
index 0000000..1cf84cf
--- /dev/null
+++ b/arch/um/include/asm/hw_irq.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_UM_HW_IRQ_H
+#define _ASM_UM_HW_IRQ_H
+
+#include "asm/irq.h"
+#include "asm/archparam.h"
+
+#endif
diff --git a/arch/um/include/asm/io.h b/arch/um/include/asm/io.h
new file mode 100644
index 0000000..44e8b8c
--- /dev/null
+++ b/arch/um/include/asm/io.h
@@ -0,0 +1,57 @@
+#ifndef __UM_IO_H
+#define __UM_IO_H
+
+#include "asm/page.h"
+
+#define IO_SPACE_LIMIT 0xdeadbeef /* Sure hope nothing uses this */
+
+static inline int inb(unsigned long i) { return(0); }
+static inline void outb(char c, unsigned long i) { }
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa((void *) address);
+}
+
+static inline void * phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+static inline void writeb(unsigned char b, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *) addr = b;
+}
+static inline void writew(unsigned short b, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *) addr = b;
+}
+static inline void writel(unsigned int b, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *) addr = b;
+}
+static inline void writeq(unsigned int b, volatile void __iomem *addr)
+{
+	*(volatile unsigned long long __force *) addr = b;
+}
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+#define __raw_writeq writeq
+
+#endif
diff --git a/arch/um/include/asm/irq.h b/arch/um/include/asm/irq.h
new file mode 100644
index 0000000..4a2037f
--- /dev/null
+++ b/arch/um/include/asm/irq.h
@@ -0,0 +1,23 @@
+#ifndef __UM_IRQ_H
+#define __UM_IRQ_H
+
+#define TIMER_IRQ		0
+#define UMN_IRQ			1
+#define CONSOLE_IRQ		2
+#define CONSOLE_WRITE_IRQ	3
+#define UBD_IRQ			4
+#define UM_ETH_IRQ		5
+#define SSL_IRQ			6
+#define SSL_WRITE_IRQ		7
+#define ACCEPT_IRQ		8
+#define MCONSOLE_IRQ		9
+#define WINCH_IRQ		10
+#define SIGIO_WRITE_IRQ 	11
+#define TELNETD_IRQ 		12
+#define XTERM_IRQ 		13
+#define RANDOM_IRQ 		14
+
+#define LAST_IRQ RANDOM_IRQ
+#define NR_IRQS (LAST_IRQ + 1)
+
+#endif
diff --git a/arch/um/include/asm/irq_regs.h b/arch/um/include/asm/irq_regs.h
new file mode 100644
index 0000000..3dd9c0b
--- /dev/null
+++ b/arch/um/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/um/include/asm/irq_vectors.h b/arch/um/include/asm/irq_vectors.h
new file mode 100644
index 0000000..62ddba6
--- /dev/null
+++ b/arch/um/include/asm/irq_vectors.h
@@ -0,0 +1,20 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_IRQ_VECTORS_H
+#define __UM_IRQ_VECTORS_H
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/include/asm/irqflags.h b/arch/um/include/asm/irqflags.h
new file mode 100644
index 0000000..659b9ab
--- /dev/null
+++ b/arch/um/include/asm/irqflags.h
@@ -0,0 +1,6 @@
+#ifndef __UM_IRQFLAGS_H
+#define __UM_IRQFLAGS_H
+
+/* Empty for now */
+
+#endif
diff --git a/arch/um/include/asm/kdebug.h b/arch/um/include/asm/kdebug.h
new file mode 100644
index 0000000..6ece1b0
--- /dev/null
+++ b/arch/um/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/um/include/asm/kmap_types.h b/arch/um/include/asm/kmap_types.h
new file mode 100644
index 0000000..6c03acd
--- /dev/null
+++ b/arch/um/include/asm/kmap_types.h
@@ -0,0 +1,29 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_KMAP_TYPES_H
+#define __UM_KMAP_TYPES_H
+
+/* No more #include "asm/arch/kmap_types.h" ! */
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_UML_USERCOPY,	/* UML specific, for copy_*_user - used in do_op_one_page */
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/um/include/asm/mmu.h b/arch/um/include/asm/mmu.h
new file mode 100644
index 0000000..2cf35c2
--- /dev/null
+++ b/arch/um/include/asm/mmu.h
@@ -0,0 +1,22 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __MMU_H
+#define __MMU_H
+
+#include "um_mmu.h"
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/include/asm/mmu_context.h b/arch/um/include/asm/mmu_context.h
new file mode 100644
index 0000000..54f42e8
--- /dev/null
+++ b/arch/um/include/asm/mmu_context.h
@@ -0,0 +1,54 @@
+/* 
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_MMU_CONTEXT_H
+#define __UM_MMU_CONTEXT_H
+
+#include "linux/sched.h"
+#include "um_mmu.h"
+
+extern void arch_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm);
+extern void arch_exit_mmap(struct mm_struct *mm);
+
+#define get_mmu_context(task) do ; while(0)
+#define activate_context(tsk) do ; while(0)
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+extern void force_flush_all(void);
+
+static inline void activate_mm(struct mm_struct *old, struct mm_struct *new)
+{
+	/*
+	 * This is called by fs/exec.c and sys_unshare()
+	 * when the new ->mm is used for the first time.
+	 */
+	__switch_mm(&new->context.id);
+	arch_dup_mmap(old, new);
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, 
+			     struct task_struct *tsk)
+{
+	unsigned cpu = smp_processor_id();
+
+	if(prev != next){
+		cpu_clear(cpu, prev->cpu_vm_mask);
+		cpu_set(cpu, next->cpu_vm_mask);
+		if(next != &init_mm)
+			__switch_mm(&next->context.id);
+	}
+}
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, 
+				  struct task_struct *tsk)
+{
+}
+
+extern int init_new_context(struct task_struct *task, struct mm_struct *mm);
+
+extern void destroy_context(struct mm_struct *mm);
+
+#endif
diff --git a/arch/um/include/asm/mutex.h b/arch/um/include/asm/mutex.h
new file mode 100644
index 0000000..458c1f7
--- /dev/null
+++ b/arch/um/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/um/include/asm/page.h b/arch/um/include/asm/page.h
new file mode 100644
index 0000000..55f28a0
--- /dev/null
+++ b/arch/um/include/asm/page.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Copyright 2003 PathScale, Inc.
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PAGE_H
+#define __UM_PAGE_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+struct page;
+
+#include <linux/types.h>
+#include <sysdep/vm-flags.h>
+
+/*
+ * These are used to make use of C type-checking..
+ */
+
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#if defined(CONFIG_3_LEVEL_PGTABLES) && !defined(CONFIG_64BIT)
+
+typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x) ((x).pte_low | ((unsigned long long) (x).pte_high << 32))
+
+#define pte_get_bits(pte, bits) ((pte).pte_low & (bits))
+#define pte_set_bits(pte, bits) ((pte).pte_low |= (bits))
+#define pte_clear_bits(pte, bits) ((pte).pte_low &= ~(bits))
+#define pte_copy(to, from) ({ (to).pte_high = (from).pte_high; \
+			      smp_wmb(); \
+			      (to).pte_low = (from).pte_low; })
+#define pte_is_zero(pte) (!((pte).pte_low & ~_PAGE_NEWPAGE) && !(pte).pte_high)
+#define pte_set_val(pte, phys, prot) \
+	({ (pte).pte_high = (phys) >> 32; \
+	   (pte).pte_low = (phys) | pgprot_val(prot); })
+
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x) ((pmd_t) { (x) } )
+
+typedef unsigned long long pfn_t;
+typedef unsigned long long phys_t;
+
+#else
+
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+
+#ifdef CONFIG_3_LEVEL_PGTABLES
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x) ((pmd_t) { (x) } )
+#endif
+
+#define pte_val(x)	((x).pte)
+
+
+#define pte_get_bits(p, bits) ((p).pte & (bits))
+#define pte_set_bits(p, bits) ((p).pte |= (bits))
+#define pte_clear_bits(p, bits) ((p).pte &= ~(bits))
+#define pte_copy(to, from) ((to).pte = (from).pte)
+#define pte_is_zero(p) (!((p).pte & ~_PAGE_NEWPAGE))
+#define pte_set_val(p, phys, prot) (p).pte = (phys | pgprot_val(prot))
+
+typedef unsigned long pfn_t;
+typedef unsigned long phys_t;
+
+#endif
+
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+typedef struct page *pgtable_t;
+
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+extern unsigned long uml_physmem;
+
+#define PAGE_OFFSET (uml_physmem)
+#define KERNELBASE PAGE_OFFSET
+
+#define __va_space (8*1024*1024)
+
+#include "mem.h"
+
+/* Cast to unsigned long before casting to void * to avoid a warning from
+ * mmap_kmem about cutting a long long down to a void *.  Not sure that
+ * casting is the right thing, but 32-bit UML can't have 64-bit virtual
+ * addresses
+ */
+#define __pa(virt) to_phys((void *) (unsigned long) (virt))
+#define __va(phys) to_virt((unsigned long) (phys))
+
+#define phys_to_pfn(p) ((pfn_t) ((p) >> PAGE_SHIFT))
+#define pfn_to_phys(pfn) ((phys_t) ((pfn) << PAGE_SHIFT))
+
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
+#define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* __UM_PAGE_H */
diff --git a/arch/um/include/asm/page_offset.h b/arch/um/include/asm/page_offset.h
new file mode 100644
index 0000000..1c168df
--- /dev/null
+++ b/arch/um/include/asm/page_offset.h
@@ -0,0 +1 @@
+#define PAGE_OFFSET_RAW (uml_physmem)
diff --git a/arch/um/include/asm/param.h b/arch/um/include/asm/param.h
new file mode 100644
index 0000000..e44f4e6
--- /dev/null
+++ b/arch/um/include/asm/param.h
@@ -0,0 +1,20 @@
+#ifndef _UM_PARAM_H
+#define _UM_PARAM_H
+
+#define EXEC_PAGESIZE   4096
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+#define MAXHOSTNAMELEN  64      /* max length of hostname */
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ
+#define USER_HZ	100	   /* .. some user interfaces are in "ticks" */
+#define CLOCKS_PER_SEC (USER_HZ)  /* frequency at which times() counts */
+#else
+#define HZ 100
+#endif
+
+#endif
diff --git a/arch/um/include/asm/pci.h b/arch/um/include/asm/pci.h
new file mode 100644
index 0000000..5992319
--- /dev/null
+++ b/arch/um/include/asm/pci.h
@@ -0,0 +1,7 @@
+#ifndef __UM_PCI_H
+#define __UM_PCI_H
+
+#define PCI_DMA_BUS_IS_PHYS     (1)
+#define pcibios_scan_all_fns(a, b)	0
+
+#endif
diff --git a/arch/um/include/asm/pda.h b/arch/um/include/asm/pda.h
new file mode 100644
index 0000000..0d8bf33
--- /dev/null
+++ b/arch/um/include/asm/pda.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PDA_X86_64_H
+#define __UM_PDA_X86_64_H
+
+/* XXX */
+struct foo {
+	unsigned int __softirq_pending;
+	unsigned int __nmi_count;
+};
+
+extern struct foo me;
+
+#define read_pda(me) (&me)
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/include/asm/pgalloc.h b/arch/um/include/asm/pgalloc.h
new file mode 100644
index 0000000..9062a6e
--- /dev/null
+++ b/arch/um/include/asm/pgalloc.h
@@ -0,0 +1,72 @@
+/* 
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright 2003 PathScale, Inc.
+ * Derived from include/asm-i386/pgalloc.h and include/asm-i386/pgtable.h
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PGALLOC_H
+#define __UM_PGALLOC_H
+
+#include "linux/mm.h"
+#include "asm/fixmap.h"
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+	set_pmd(pmd, __pmd(_PAGE_TABLE + (unsigned long) __pa(pte)))
+
+#define pmd_populate(mm, pmd, pte) 				\
+	set_pmd(pmd, __pmd(_PAGE_TABLE +			\
+		((unsigned long long)page_to_pfn(pte) <<	\
+			(unsigned long long) PAGE_SHIFT)))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_page(pte);
+}
+
+#define __pte_free_tlb(tlb,pte)				\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb),(pte));			\
+} while (0)
+
+#ifdef CONFIG_3_LEVEL_PGTABLES
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	free_page((unsigned long)pmd);
+}
+
+#define __pmd_free_tlb(tlb,x)   tlb_remove_page((tlb),virt_to_page(x))
+#endif
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/include/asm/pgtable-2level.h b/arch/um/include/asm/pgtable-2level.h
new file mode 100644
index 0000000..f534b73
--- /dev/null
+++ b/arch/um/include/asm/pgtable-2level.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright 2003 PathScale, Inc.
+ * Derived from include/asm-i386/pgtable.h
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PGTABLE_2LEVEL_H
+#define __UM_PGTABLE_2LEVEL_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+
+#define PGDIR_SHIFT	22
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: the i386 is two-level, so
+ * we don't really have any PMD directory physically.
+ */
+#define PTRS_PER_PTE	1024
+#define USER_PTRS_PER_PGD ((TASK_SIZE + (PGDIR_SIZE - 1)) / PGDIR_SIZE)
+#define PTRS_PER_PGD	1024
+#define FIRST_USER_ADDRESS	0
+
+#define pte_ERROR(e) \
+        printk("%s:%d: bad pte %p(%08lx).\n", __FILE__, __LINE__, &(e), \
+	       pte_val(e))
+#define pgd_ERROR(e) \
+        printk("%s:%d: bad pgd %p(%08lx).\n", __FILE__, __LINE__, &(e), \
+	       pgd_val(e))
+
+static inline int pgd_newpage(pgd_t pgd)	{ return 0; }
+static inline void pgd_mkuptodate(pgd_t pgd)	{ }
+
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval))
+
+#define pte_pfn(x) phys_to_pfn(pte_val(x))
+#define pfn_pte(pfn, prot) __pte(pfn_to_phys(pfn) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) __pmd(pfn_to_phys(pfn) | pgprot_val(prot))
+
+/*
+ * Bits 0 through 4 are taken
+ */
+#define PTE_FILE_MAX_BITS	27
+
+#define pte_to_pgoff(pte) (pte_val(pte) >> 5)
+
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 5) + _PAGE_FILE })
+
+#endif
diff --git a/arch/um/include/asm/pgtable-3level.h b/arch/um/include/asm/pgtable-3level.h
new file mode 100644
index 0000000..0446f45
--- /dev/null
+++ b/arch/um/include/asm/pgtable-3level.h
@@ -0,0 +1,146 @@
+/*
+ * Copyright 2003 PathScale Inc
+ * Derived from include/asm-i386/pgtable.h
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PGTABLE_3LEVEL_H
+#define __UM_PGTABLE_3LEVEL_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+
+#ifdef CONFIG_64BIT
+#define PGDIR_SHIFT	30
+#else
+#define PGDIR_SHIFT	31
+#endif
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* PMD_SHIFT determines the size of the area a second-level page table can
+ * map
+ */
+
+#define PMD_SHIFT	21
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/*
+ * entries per page directory level
+ */
+
+#define PTRS_PER_PTE 512
+#ifdef CONFIG_64BIT
+#define PTRS_PER_PMD 512
+#define PTRS_PER_PGD 512
+#else
+#define PTRS_PER_PMD 1024
+#define PTRS_PER_PGD 1024
+#endif
+
+#define USER_PTRS_PER_PGD ((TASK_SIZE + (PGDIR_SIZE - 1)) / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#define pte_ERROR(e) \
+        printk("%s:%d: bad pte %p(%016lx).\n", __FILE__, __LINE__, &(e), \
+	       pte_val(e))
+#define pmd_ERROR(e) \
+        printk("%s:%d: bad pmd %p(%016lx).\n", __FILE__, __LINE__, &(e), \
+	       pmd_val(e))
+#define pgd_ERROR(e) \
+        printk("%s:%d: bad pgd %p(%016lx).\n", __FILE__, __LINE__, &(e), \
+	       pgd_val(e))
+
+#define pud_none(x)	(!(pud_val(x) & ~_PAGE_NEWPAGE))
+#define	pud_bad(x)	((pud_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pud_present(x)	(pud_val(x) & _PAGE_PRESENT)
+#define pud_populate(mm, pud, pmd) \
+	set_pud(pud, __pud(_PAGE_TABLE + __pa(pmd)))
+
+#ifdef CONFIG_64BIT
+#define set_pud(pudptr, pudval) set_64bit((phys_t *) (pudptr), pud_val(pudval))
+#else
+#define set_pud(pudptr, pudval) (*(pudptr) = (pudval))
+#endif
+
+static inline int pgd_newpage(pgd_t pgd)
+{
+	return(pgd_val(pgd) & _PAGE_NEWPAGE);
+}
+
+static inline void pgd_mkuptodate(pgd_t pgd) { pgd_val(pgd) &= ~_PAGE_NEWPAGE; }
+
+#ifdef CONFIG_64BIT
+#define set_pmd(pmdptr, pmdval) set_64bit((phys_t *) (pmdptr), pmd_val(pmdval))
+#else
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval))
+#endif
+
+struct mm_struct;
+extern pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address);
+
+static inline void pud_clear (pud_t *pud)
+{
+	set_pud(pud, __pud(_PAGE_NEWPAGE));
+}
+
+#define pud_page(pud) phys_to_page(pud_val(pud) & PAGE_MASK)
+#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PAGE_MASK))
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pud, address) ((pmd_t *) pud_page_vaddr(*(pud)) + \
+			pmd_index(address))
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	return phys_to_pfn(pte_val(pte));
+}
+
+static inline pte_t pfn_pte(pfn_t page_nr, pgprot_t pgprot)
+{
+	pte_t pte;
+	phys_t phys = pfn_to_phys(page_nr);
+
+	pte_set_val(pte, phys, pgprot);
+	return pte;
+}
+
+static inline pmd_t pfn_pmd(pfn_t page_nr, pgprot_t pgprot)
+{
+	return __pmd((page_nr << PAGE_SHIFT) | pgprot_val(pgprot));
+}
+
+/*
+ * Bits 0 through 3 are taken in the low part of the pte,
+ * put the 32 bits of offset into the high part.
+ */
+#define PTE_FILE_MAX_BITS	32
+
+#ifdef CONFIG_64BIT
+
+#define pte_to_pgoff(p) ((p).pte >> 32)
+
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 32) | _PAGE_FILE })
+
+#else
+
+#define pte_to_pgoff(pte) ((pte).pte_high)
+
+#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) })
+
+#endif
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
new file mode 100644
index 0000000..58da248
--- /dev/null
+++ b/arch/um/include/asm/pgtable.h
@@ -0,0 +1,366 @@
+/* 
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Copyright 2003 PathScale, Inc.
+ * Derived from include/asm-i386/pgtable.h
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PGTABLE_H
+#define __UM_PGTABLE_H
+
+#include <asm/fixmap.h>
+
+#define _PAGE_PRESENT	0x001
+#define _PAGE_NEWPAGE	0x002
+#define _PAGE_NEWPROT	0x004
+#define _PAGE_RW	0x020
+#define _PAGE_USER	0x040
+#define _PAGE_ACCESSED	0x080
+#define _PAGE_DIRTY	0x100
+/* If _PAGE_PRESENT is clear, we use these: */
+#define _PAGE_FILE	0x008	/* nonlinear file mapping, saved PTE; unset:swap */
+#define _PAGE_PROTNONE	0x010	/* if the user mapped it with PROT_NONE;
+				   pte_present gives true */
+
+#ifdef CONFIG_3_LEVEL_PGTABLES
+#include "asm/pgtable-3level.h"
+#else
+#include "asm/pgtable-2level.h"
+#endif
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/* zero page used for uninitialized stuff */
+extern unsigned long *empty_zero_page;
+
+#define pgtable_cache_init() do ; while (0)
+
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+
+extern unsigned long end_iomem;
+
+#define VMALLOC_OFFSET	(__va_space)
+#define VMALLOC_START ((end_iomem + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define PKMAP_BASE ((FIXADDR_START - LAST_PKMAP * PAGE_SIZE) & PMD_MASK)
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END	(PKMAP_BASE-2*PAGE_SIZE)
+#else
+# define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+#endif
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
+
+/*
+ * The i386 can't do page protection for execute, and considers that the same
+ * are read.
+ * Also, write permissions imply read permissions. This is the closest we can
+ * get..
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page)
+
+#define pte_clear(mm,addr,xp) pte_set_val(*(xp), (phys_t) 0, __pgprot(_PAGE_NEWPAGE))
+
+#define pmd_none(x)	(!((unsigned long)pmd_val(x) & ~_PAGE_NEWPAGE))
+#define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp)	do { pmd_val(*(xp)) = _PAGE_NEWPAGE; } while (0)
+
+#define pmd_newpage(x)  (pmd_val(x) & _PAGE_NEWPAGE)
+#define pmd_mkuptodate(x) (pmd_val(x) &= ~_PAGE_NEWPAGE)
+
+#define pud_newpage(x)  (pud_val(x) & _PAGE_NEWPAGE)
+#define pud_mkuptodate(x) (pud_val(x) &= ~_PAGE_NEWPAGE)
+
+#define pmd_page(pmd) phys_to_page(pmd_val(pmd) & PAGE_MASK)
+
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+#define pte_present(x)	pte_get_bits(x, (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+/*
+ * =================================
+ * Flags checking section.
+ * =================================
+ */
+
+static inline int pte_none(pte_t pte)
+{
+	return pte_is_zero(pte);
+}
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)
+{ 
+	return((pte_get_bits(pte, _PAGE_USER)) &&
+	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
+}
+
+static inline int pte_exec(pte_t pte){
+	return((pte_get_bits(pte, _PAGE_USER)) &&
+	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
+}
+
+static inline int pte_write(pte_t pte)
+{
+	return((pte_get_bits(pte, _PAGE_RW)) &&
+	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
+}
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_FILE);
+}
+
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_DIRTY);
+}
+
+static inline int pte_young(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_ACCESSED);
+}
+
+static inline int pte_newpage(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_NEWPAGE);
+}
+
+static inline int pte_newprot(pte_t pte)
+{ 
+	return(pte_present(pte) && (pte_get_bits(pte, _PAGE_NEWPROT)));
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+/*
+ * =================================
+ * Flags setting section.
+ * =================================
+ */
+
+static inline pte_t pte_mknewprot(pte_t pte)
+{
+	pte_set_bits(pte, _PAGE_NEWPROT);
+	return(pte);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_clear_bits(pte, _PAGE_DIRTY);
+	return(pte);
+}
+
+static inline pte_t pte_mkold(pte_t pte)	
+{ 
+	pte_clear_bits(pte, _PAGE_ACCESSED);
+	return(pte);
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{ 
+	pte_clear_bits(pte, _PAGE_RW);
+	return(pte_mknewprot(pte)); 
+}
+
+static inline pte_t pte_mkread(pte_t pte)
+{ 
+	pte_set_bits(pte, _PAGE_USER);
+	return(pte_mknewprot(pte)); 
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{ 
+	pte_set_bits(pte, _PAGE_DIRTY);
+	return(pte);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_set_bits(pte, _PAGE_ACCESSED);
+	return(pte);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)	
+{
+	pte_set_bits(pte, _PAGE_RW);
+	return(pte_mknewprot(pte)); 
+}
+
+static inline pte_t pte_mkuptodate(pte_t pte)	
+{
+	pte_clear_bits(pte, _PAGE_NEWPAGE);
+	if(pte_present(pte))
+		pte_clear_bits(pte, _PAGE_NEWPROT);
+	return(pte); 
+}
+
+static inline pte_t pte_mknewpage(pte_t pte)
+{
+	pte_set_bits(pte, _PAGE_NEWPAGE);
+	return(pte);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return(pte);
+}
+
+static inline void set_pte(pte_t *pteptr, pte_t pteval)
+{
+	pte_copy(*pteptr, pteval);
+
+	/* If it's a swap entry, it needs to be marked _PAGE_NEWPAGE so
+	 * fix_range knows to unmap it.  _PAGE_NEWPROT is specific to
+	 * mapped pages.
+	 */
+
+	*pteptr = pte_mknewpage(*pteptr);
+	if(pte_present(*pteptr)) *pteptr = pte_mknewprot(*pteptr);
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define phys_to_page(phys) pfn_to_page(phys_to_pfn(phys))
+#define __virt_to_page(virt) phys_to_page(__pa(virt))
+#define page_to_phys(page) pfn_to_phys((pfn_t) page_to_pfn(page))
+#define virt_to_page(addr) __virt_to_page((const unsigned long) addr)
+
+#define mk_pte(page, pgprot) \
+	({ pte_t pte;					\
+							\
+	pte_set_val(pte, page_to_phys(page), (pgprot));	\
+	if (pte_present(pte))				\
+		pte_mknewprot(pte_mknewpage(pte));	\
+	pte;})
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_set_val(pte, (pte_val(pte) & _PAGE_CHG_MASK), newprot);
+	return pte; 
+}
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+#define pmd_page_vaddr(pmd) \
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_vaddr(*(dir)) +  pte_index(address))
+#define pte_offset_map(dir, address) \
+	((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+struct mm_struct;
+extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
+
+#define update_mmu_cache(vma,address,pte) do ; while (0)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 4) & 0x3f)
+#define __swp_offset(x)			((x).val >> 11)
+
+#define __swp_entry(type, offset) \
+	((swp_entry_t) { ((type) << 4) | ((offset) << 11) })
+#define __pte_to_swp_entry(pte) \
+	((swp_entry_t) { pte_val(pte_mkuptodate(pte)) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define kern_addr_valid(addr) (1)
+
+#include <asm-generic/pgtable.h>
+
+/* Clear a kernel PTE and flush it from the TLB */
+#define kpte_clear_flush(ptep, vaddr)		\
+do {						\
+	pte_clear(&init_mm, (vaddr), (ptep));	\
+	__flush_tlb_one((vaddr));		\
+} while (0)
+
+#endif
diff --git a/arch/um/include/asm/processor-generic.h b/arch/um/include/asm/processor-generic.h
new file mode 100644
index 0000000..bed6688
--- /dev/null
+++ b/arch/um/include/asm/processor-generic.h
@@ -0,0 +1,136 @@
+/* 
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PROCESSOR_GENERIC_H
+#define __UM_PROCESSOR_GENERIC_H
+
+struct pt_regs;
+
+struct task_struct;
+
+#include "asm/ptrace.h"
+#include "registers.h"
+#include "sysdep/archsetjmp.h"
+
+struct mm_struct;
+
+struct thread_struct {
+	struct task_struct *saved_task;
+	/*
+	 * This flag is set to 1 before calling do_fork (and analyzed in
+	 * copy_thread) to mark that we are begin called from userspace (fork /
+	 * vfork / clone), and reset to 0 after. It is left to 0 when called
+	 * from kernelspace (i.e. kernel_thread() or fork_idle(),
+	 * as of 2.6.11).
+	 */
+	int forking;
+	struct pt_regs regs;
+	int singlestep_syscall;
+	void *fault_addr;
+	jmp_buf *fault_catcher;
+	struct task_struct *prev_sched;
+	unsigned long temp_stack;
+	jmp_buf *exec_buf;
+	struct arch_thread arch;
+	jmp_buf switch_buf;
+	int mm_count;
+	struct {
+		int op;
+		union {
+			struct {
+				int pid;
+			} fork, exec;
+			struct {
+				int (*proc)(void *);
+				void *arg;
+			} thread;
+			struct {
+				void (*proc)(void *);
+				void *arg;
+			} cb;
+		} u;
+	} request;
+};
+
+#define INIT_THREAD \
+{ \
+	.forking		= 0, \
+	.regs		   	= EMPTY_REGS,	\
+	.fault_addr		= NULL, \
+	.prev_sched		= NULL, \
+	.temp_stack		= 0, \
+	.exec_buf		= NULL, \
+	.arch			= INIT_ARCH_THREAD, \
+	.request		= { 0 } \
+}
+
+extern struct task_struct *alloc_task_struct(void);
+
+static inline void release_thread(struct task_struct *task)
+{
+}
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+static inline void prepare_to_copy(struct task_struct *tsk)
+{
+}
+
+
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+static inline void mm_copy_segments(struct mm_struct *from_mm,
+				    struct mm_struct *new_mm)
+{
+}
+
+#define init_stack	(init_thread_union.stack)
+
+/*
+ * User space process size: 3GB (default).
+ */
+extern unsigned long task_size;
+
+#define TASK_SIZE (task_size)
+
+#undef STACK_TOP
+#undef STACK_TOP_MAX
+
+extern unsigned long stacksizelim;
+
+#define STACK_ROOM	(stacksizelim)
+#define STACK_TOP	(TASK_SIZE - 2 * PAGE_SIZE)
+#define STACK_TOP_MAX	STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(0x40000000)
+
+extern void start_thread(struct pt_regs *regs, unsigned long entry, 
+			 unsigned long stack);
+
+struct cpuinfo_um {
+	unsigned long loops_per_jiffy;
+	int ipi_pipe[2];
+};
+
+extern struct cpuinfo_um boot_cpu_data;
+
+#define my_cpu_data		cpu_data[smp_processor_id()]
+
+#ifdef CONFIG_SMP
+extern struct cpuinfo_um cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+#endif
+
+
+#define KSTK_REG(tsk, reg) get_thread_reg(reg, &tsk->thread.switch_buf)
+extern unsigned long get_wchan(struct task_struct *p);
+
+#endif
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
new file mode 100644
index 0000000..6c88990
--- /dev/null
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -0,0 +1,55 @@
+/* 
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PTRACE_GENERIC_H
+#define __UM_PTRACE_GENERIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace-abi.h>
+#include <asm/user.h>
+#include "sysdep/ptrace.h"
+
+struct pt_regs {
+	struct uml_pt_regs regs;
+};
+
+#define EMPTY_REGS { .regs = EMPTY_UML_PT_REGS }
+
+#define PT_REGS_IP(r) UPT_IP(&(r)->regs)
+#define PT_REGS_SP(r) UPT_SP(&(r)->regs)
+
+#define PT_REG(r, reg) UPT_REG(&(r)->regs, reg)
+#define PT_REGS_SET(r, reg, val) UPT_SET(&(r)->regs, reg, val)
+
+#define PT_REGS_SET_SYSCALL_RETURN(r, res) \
+	UPT_SET_SYSCALL_RETURN(&(r)->regs, res)
+#define PT_REGS_RESTART_SYSCALL(r) UPT_RESTART_SYSCALL(&(r)->regs)
+
+#define PT_REGS_SYSCALL_NR(r) UPT_SYSCALL_NR(&(r)->regs)
+
+#define PT_REGS_SC(r) UPT_SC(&(r)->regs)
+
+#define instruction_pointer(regs) PT_REGS_IP(regs)
+
+struct task_struct;
+
+extern long subarch_ptrace(struct task_struct *child, long request, long addr,
+			   long data);
+extern unsigned long getreg(struct task_struct *child, int regno);
+extern int putreg(struct task_struct *child, int regno, unsigned long value);
+extern int get_fpregs(struct user_i387_struct __user *buf,
+		      struct task_struct *child);
+extern int set_fpregs(struct user_i387_struct __user *buf,
+		      struct task_struct *child);
+
+extern void show_regs(struct pt_regs *regs);
+
+extern int arch_copy_tls(struct task_struct *new);
+extern void clear_flushed_tls(struct task_struct *task);
+
+#endif
+
+#endif
diff --git a/arch/um/include/asm/required-features.h b/arch/um/include/asm/required-features.h
new file mode 100644
index 0000000..dfb967b
--- /dev/null
+++ b/arch/um/include/asm/required-features.h
@@ -0,0 +1,9 @@
+#ifndef __UM_REQUIRED_FEATURES_H
+#define __UM_REQUIRED_FEATURES_H
+
+/*
+ * Nothing to see, just need something for the i386 and x86_64 asm
+ * headers to include.
+ */
+
+#endif
diff --git a/arch/um/include/asm/sections.h b/arch/um/include/asm/sections.h
new file mode 100644
index 0000000..6b0231e
--- /dev/null
+++ b/arch/um/include/asm/sections.h
@@ -0,0 +1,7 @@
+#ifndef _UM_SECTIONS_H
+#define _UM_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/arch/um/include/asm/segment.h b/arch/um/include/asm/segment.h
new file mode 100644
index 0000000..45183fc
--- /dev/null
+++ b/arch/um/include/asm/segment.h
@@ -0,0 +1,10 @@
+#ifndef __UM_SEGMENT_H
+#define __UM_SEGMENT_H
+
+extern int host_gdt_entry_tls_min;
+
+#define GDT_ENTRY_TLS_ENTRIES 3
+#define GDT_ENTRY_TLS_MIN host_gdt_entry_tls_min
+#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
+#endif
diff --git a/arch/um/include/asm/setup.h b/arch/um/include/asm/setup.h
new file mode 100644
index 0000000..99f0863
--- /dev/null
+++ b/arch/um/include/asm/setup.h
@@ -0,0 +1,10 @@
+#ifndef SETUP_H_INCLUDED
+#define SETUP_H_INCLUDED
+
+/* POSIX mandated with _POSIX_ARG_MAX that we can rely on 4096 chars in the
+ * command line, so this choice is ok.
+ */
+
+#define COMMAND_LINE_SIZE 4096
+
+#endif		/* SETUP_H_INCLUDED */
diff --git a/arch/um/include/asm/smp.h b/arch/um/include/asm/smp.h
new file mode 100644
index 0000000..f27a963
--- /dev/null
+++ b/arch/um/include/asm/smp.h
@@ -0,0 +1,33 @@
+#ifndef __UM_SMP_H
+#define __UM_SMP_H
+
+#ifdef CONFIG_SMP
+
+#include "linux/bitops.h"
+#include "asm/current.h"
+#include "linux/cpumask.h"
+
+#define raw_smp_processor_id() (current_thread->cpu)
+
+#define cpu_logical_map(n) (n)
+#define cpu_number_map(n) (n)
+#define PROC_CHANGE_PENALTY	15 /* Pick a number, any number */
+extern int hard_smp_processor_id(void);
+#define NO_PROC_ID -1
+
+extern int ncpus;
+
+
+static inline void smp_cpus_done(unsigned int maxcpus)
+{
+}
+
+extern struct task_struct *idle_threads[NR_CPUS];
+
+#else
+
+#define hard_smp_processor_id()		0
+
+#endif
+
+#endif
diff --git a/arch/um/include/asm/suspend.h b/arch/um/include/asm/suspend.h
new file mode 100644
index 0000000..f4e8e00
--- /dev/null
+++ b/arch/um/include/asm/suspend.h
@@ -0,0 +1,4 @@
+#ifndef __UM_SUSPEND_H
+#define __UM_SUSPEND_H
+
+#endif
diff --git a/arch/um/include/asm/system.h b/arch/um/include/asm/system.h
new file mode 100644
index 0000000..ae5f94d
--- /dev/null
+++ b/arch/um/include/asm/system.h
@@ -0,0 +1,35 @@
+#ifndef __UM_SYSTEM_GENERIC_H
+#define __UM_SYSTEM_GENERIC_H
+
+#include "sysdep/system.h"
+
+extern void *switch_to(void *prev, void *next, void *last);
+
+extern int get_signals(void);
+extern int set_signals(int enable);
+extern int get_signals(void);
+extern void block_signals(void);
+extern void unblock_signals(void);
+
+#define raw_local_save_flags(flags) do { typecheck(unsigned long, flags); \
+				     (flags) = get_signals(); } while(0)
+#define raw_local_irq_restore(flags) do { typecheck(unsigned long, flags); \
+				      set_signals(flags); } while(0)
+
+#define raw_local_irq_save(flags) do { raw_local_save_flags(flags); \
+                                   raw_local_irq_disable(); } while(0)
+
+#define raw_local_irq_enable() unblock_signals()
+#define raw_local_irq_disable() block_signals()
+
+#define irqs_disabled()                 \
+({                                      \
+        unsigned long flags;            \
+        raw_local_save_flags(flags);        \
+        (flags == 0);                   \
+})
+
+extern void *_switch_to(void *prev, void *next, void *last);
+#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
+
+#endif
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
new file mode 100644
index 0000000..62274ab
--- /dev/null
+++ b/arch/um/include/asm/thread_info.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_THREAD_INFO_H
+#define __UM_THREAD_INFO_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;		/* current CPU */
+	int			preempt_count;  /* 0 => preemptable,
+						   <0 => BUG */
+	mm_segment_t		addr_limit;	/* thread address space:
+					 	   0-0xBFFFFFFF for user
+						   0-0xFFFFFFFF for kernel */
+	struct restart_block    restart_block;
+	struct thread_info	*real_thread;    /* Points to non-IRQ stack */
+};
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task =		&tsk,			\
+	.exec_domain =	&default_exec_domain,	\
+	.flags =		0,		\
+	.cpu =		0,			\
+	.preempt_count =	1,		\
+	.addr_limit =	KERNEL_DS,		\
+	.restart_block =  {			\
+		.fn =  do_no_restart_syscall,	\
+	},					\
+	.real_thread = NULL,			\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+#define THREAD_SIZE ((1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE)
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	unsigned long mask = THREAD_SIZE - 1;
+	ti = (struct thread_info *) (((unsigned long) &ti) & ~mask);
+	return ti;
+}
+
+#define THREAD_SIZE_ORDER CONFIG_KERNEL_STACK_ORDER
+
+#endif
+
+#define PREEMPT_ACTIVE		0x10000000
+
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling
+					 * TIF_NEED_RESCHED
+					 */
+#define TIF_RESTART_BLOCK 	4
+#define TIF_MEMDIE	 	5
+#define TIF_SYSCALL_AUDIT	6
+#define TIF_RESTORE_SIGMASK	7
+#define TIF_FREEZE		16	/* is freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG     (1 << TIF_POLLING_NRFLAG)
+#define _TIF_MEMDIE		(1 << TIF_MEMDIE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+
+#endif
diff --git a/arch/um/include/asm/timex.h b/arch/um/include/asm/timex.h
new file mode 100644
index 0000000..0f4ada0
--- /dev/null
+++ b/arch/um/include/asm/timex.h
@@ -0,0 +1,13 @@
+#ifndef __UM_TIMEX_H
+#define __UM_TIMEX_H
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#define CLOCK_TICK_RATE (HZ)
+
+#endif
diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h
new file mode 100644
index 0000000..5240fa1
--- /dev/null
+++ b/arch/um/include/asm/tlb.h
@@ -0,0 +1,127 @@
+#ifndef __UM_TLB_H
+#define __UM_TLB_H
+
+#include <linux/pagemap.h>
+#include <linux/swap.h>
+#include <asm/percpu.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+/* struct mmu_gather is an opaque type used by the mm code for passing around
+ * any data needed by arch specific code for tlb_remove_page.
+ */
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		need_flush; /* Really unmapped some ptes? */
+	unsigned long		start;
+	unsigned long		end;
+	unsigned int		fullmm; /* non-zero means full mm flush */
+};
+
+/* Users of the generic TLB shootdown code must declare this storage space. */
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
+					  unsigned long address)
+{
+	if (tlb->start > address)
+		tlb->start = address;
+	if (tlb->end < address + PAGE_SIZE)
+		tlb->end = address + PAGE_SIZE;
+}
+
+static inline void init_tlb_gather(struct mmu_gather *tlb)
+{
+	tlb->need_flush = 0;
+
+	tlb->start = TASK_SIZE;
+	tlb->end = 0;
+
+	if (tlb->fullmm) {
+		tlb->start = 0;
+		tlb->end = TASK_SIZE;
+	}
+}
+
+/* tlb_gather_mmu
+ *	Return a pointer to an initialized struct mmu_gather.
+ */
+static inline struct mmu_gather *
+tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	tlb->fullmm = full_mm_flush;
+
+	init_tlb_gather(tlb);
+
+	return tlb;
+}
+
+extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
+			       unsigned long end);
+
+static inline void
+tlb_flush_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	if (!tlb->need_flush)
+		return;
+
+	flush_tlb_mm_range(tlb->mm, tlb->start, tlb->end);
+	init_tlb_gather(tlb);
+}
+
+/* tlb_finish_mmu
+ *	Called at the end of the shootdown operation to free up any resources
+ *	that were required.
+ */
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	tlb_flush_mmu(tlb, start, end);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+/* tlb_remove_page
+ *	Must perform the equivalent to __free_pte(pte_get_and_clear(ptep)),
+ *	while handling the additional races in SMP caused by other CPUs
+ *	caching valid mappings in their TLBs.
+ */
+static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+	tlb->need_flush = 1;
+	free_page_and_swap_cache(page);
+	return;
+}
+
+/**
+ * tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation.
+ *
+ * Record the fact that pte's were really umapped in ->need_flush, so we can
+ * later optimise away the tlb invalidate.   This helps when userspace is
+ * unmapping already-unmapped pages, which happens quite a lot.
+ */
+#define tlb_remove_tlb_entry(tlb, ptep, address)		\
+	do {							\
+		tlb->need_flush = 1;				\
+		__tlb_remove_tlb_entry(tlb, ptep, address);	\
+	} while (0)
+
+#define pte_free_tlb(tlb, ptep) __pte_free_tlb(tlb, ptep)
+
+#define pud_free_tlb(tlb, pudp) __pud_free_tlb(tlb, pudp)
+
+#define pmd_free_tlb(tlb, pmdp) __pmd_free_tlb(tlb, pmdp)
+
+#define tlb_migrate_finish(mm) do {} while (0)
+
+#endif
diff --git a/arch/um/include/asm/tlbflush.h b/arch/um/include/asm/tlbflush.h
new file mode 100644
index 0000000..614f2c0
--- /dev/null
+++ b/arch/um/include/asm/tlbflush.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_TLBFLUSH_H
+#define __UM_TLBFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_kernel_vm() flushes the kernel vm area
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ */
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, 
+			    unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long address);
+extern void flush_tlb_kernel_vm(void);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void __flush_tlb_one(unsigned long addr);
+
+#endif
diff --git a/arch/um/include/asm/topology.h b/arch/um/include/asm/topology.h
new file mode 100644
index 0000000..0905e4f
--- /dev/null
+++ b/arch/um/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_UM_TOPOLOGY_H
+#define _ASM_UM_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif
diff --git a/arch/um/include/asm/uaccess.h b/arch/um/include/asm/uaccess.h
new file mode 100644
index 0000000..b9a895d
--- /dev/null
+++ b/arch/um/include/asm/uaccess.h
@@ -0,0 +1,99 @@
+/* 
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_UACCESS_H
+#define __UM_UACCESS_H
+
+#include <asm/errno.h>
+#include <asm/processor.h>
+
+/* thread_info has a mm_segment_t in it, so put the definition up here */
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#include "linux/thread_info.h"
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#include "um_uaccess.h"
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define __get_user(x, ptr) \
+({ \
+	const __typeof__(*(ptr)) __user *__private_ptr = (ptr);	\
+	__typeof__(x) __private_val;			\
+	int __private_ret = -EFAULT;			\
+	(x) = (__typeof__(*(__private_ptr)))0;				\
+	if (__copy_from_user((__force void *)&__private_val, (__private_ptr),\
+			     sizeof(*(__private_ptr))) == 0) {		\
+		(x) = (__typeof__(*(__private_ptr))) __private_val;	\
+		__private_ret = 0;					\
+	}								\
+	__private_ret;							\
+}) 
+
+#define get_user(x, ptr) \
+({ \
+        const __typeof__((*(ptr))) __user *private_ptr = (ptr); \
+        (access_ok(VERIFY_READ, private_ptr, sizeof(*private_ptr)) ? \
+	 __get_user(x, private_ptr) : ((x) = (__typeof__(*ptr))0, -EFAULT)); \
+})
+
+#define __put_user(x, ptr) \
+({ \
+        __typeof__(*(ptr)) __user *__private_ptr = ptr; \
+        __typeof__(*(__private_ptr)) __private_val; \
+        int __private_ret = -EFAULT; \
+        __private_val = (__typeof__(*(__private_ptr))) (x); \
+        if (__copy_to_user((__private_ptr), &__private_val, \
+			   sizeof(*(__private_ptr))) == 0) { \
+		__private_ret = 0; \
+	} \
+        __private_ret; \
+})
+
+#define put_user(x, ptr) \
+({ \
+        __typeof__(*(ptr)) __user *private_ptr = (ptr); \
+        (access_ok(VERIFY_WRITE, private_ptr, sizeof(*private_ptr)) ? \
+	 __put_user(x, private_ptr) : -EFAULT); \
+})
+
+#define strlen_user(str) strnlen_user(str, ~0U >> 1)
+
+struct exception_table_entry
+{
+        unsigned long insn;
+	unsigned long fixup;
+};
+
+#endif
diff --git a/arch/um/include/asm/xor.h b/arch/um/include/asm/xor.h
new file mode 100644
index 0000000..a19db3e
--- /dev/null
+++ b/arch/um/include/asm/xor.h
@@ -0,0 +1,6 @@
+#ifndef __UM_XOR_H
+#define __UM_XOR_H
+
+#include "asm-generic/xor.h"
+
+#endif
diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h
deleted file mode 100644
index b54bd35..0000000
--- a/arch/um/include/common-offsets.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* for use by sys-$SUBARCH/kernel-offsets.c */
-
-DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE);
-
-OFFSET(HOST_TASK_REGS, task_struct, thread.regs);
-OFFSET(HOST_TASK_PID, task_struct, pid);
-
-DEFINE(UM_KERN_PAGE_SIZE, PAGE_SIZE);
-DEFINE(UM_KERN_PAGE_MASK, PAGE_MASK);
-DEFINE(UM_KERN_PAGE_SHIFT, PAGE_SHIFT);
-DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
-
-DEFINE_STR(UM_KERN_EMERG, KERN_EMERG);
-DEFINE_STR(UM_KERN_ALERT, KERN_ALERT);
-DEFINE_STR(UM_KERN_CRIT, KERN_CRIT);
-DEFINE_STR(UM_KERN_ERR, KERN_ERR);
-DEFINE_STR(UM_KERN_WARNING, KERN_WARNING);
-DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE);
-DEFINE_STR(UM_KERN_INFO, KERN_INFO);
-DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG);
-DEFINE_STR(UM_KERN_CONT, KERN_CONT);
-
-DEFINE(UM_ELF_CLASS, ELF_CLASS);
-DEFINE(UM_ELFCLASS32, ELFCLASS32);
-DEFINE(UM_ELFCLASS64, ELFCLASS64);
-
-DEFINE(UM_NR_CPUS, NR_CPUS);
-
-DEFINE(UM_GFP_KERNEL, GFP_KERNEL);
-DEFINE(UM_GFP_ATOMIC, GFP_ATOMIC);
-
-/* For crypto assembler code. */
-DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx));
-
-DEFINE(UM_THREAD_SIZE, THREAD_SIZE);
-
-DEFINE(UM_HZ, HZ);
-
-DEFINE(UM_USEC_PER_SEC, USEC_PER_SEC);
-DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
-DEFINE(UM_NSEC_PER_USEC, NSEC_PER_USEC);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
deleted file mode 100644
index db5be46..0000000
--- a/arch/um/include/os.h
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __OS_H__
-#define __OS_H__
-
-#include <stdarg.h>
-#include "irq_user.h"
-#include "longjmp.h"
-#include "mm_id.h"
-#include "sysdep/tls.h"
-#include "../os/include/file.h"
-
-#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
-
-#define OS_TYPE_FILE 1
-#define OS_TYPE_DIR 2
-#define OS_TYPE_SYMLINK 3
-#define OS_TYPE_CHARDEV 4
-#define OS_TYPE_BLOCKDEV 5
-#define OS_TYPE_FIFO 6
-#define OS_TYPE_SOCK 7
-
-/* os_access() flags */
-#define OS_ACC_F_OK    0       /* Test for existence.  */
-#define OS_ACC_X_OK    1       /* Test for execute permission.  */
-#define OS_ACC_W_OK    2       /* Test for write permission.  */
-#define OS_ACC_R_OK    4       /* Test for read permission.  */
-#define OS_ACC_RW_OK   (OS_ACC_W_OK | OS_ACC_R_OK) /* Test for RW permission */
-
-/*
- * types taken from stat_file() in hostfs_user.c
- * (if they are wrong here, they are wrong there...).
- */
-struct uml_stat {
-	int                ust_dev;        /* device */
-	unsigned long long ust_ino;        /* inode */
-	int                ust_mode;       /* protection */
-	int                ust_nlink;      /* number of hard links */
-	int                ust_uid;        /* user ID of owner */
-	int                ust_gid;        /* group ID of owner */
-	unsigned long long ust_size;       /* total size, in bytes */
-	int                ust_blksize;    /* blocksize for filesystem I/O */
-	unsigned long long ust_blocks;     /* number of blocks allocated */
-	unsigned long      ust_atime;      /* time of last access */
-	unsigned long      ust_mtime;      /* time of last modification */
-	unsigned long      ust_ctime;      /* time of last change */
-};
-
-struct openflags {
-	unsigned int r : 1;
-	unsigned int w : 1;
-	unsigned int s : 1;	/* O_SYNC */
-	unsigned int c : 1;	/* O_CREAT */
-	unsigned int t : 1;	/* O_TRUNC */
-	unsigned int a : 1;	/* O_APPEND */
-	unsigned int e : 1;	/* O_EXCL */
-	unsigned int cl : 1;    /* FD_CLOEXEC */
-};
-
-#define OPENFLAGS() ((struct openflags) { .r = 0, .w = 0, .s = 0, .c = 0, \
-					  .t = 0, .a = 0, .e = 0, .cl = 0 })
-
-static inline struct openflags of_read(struct openflags flags)
-{
-	flags.r = 1;
-	return flags;
-}
-
-static inline struct openflags of_write(struct openflags flags)
-{
-	flags.w = 1;
-	return flags;
-}
-
-static inline struct openflags of_rdwr(struct openflags flags)
-{
-	return of_read(of_write(flags));
-}
-
-static inline struct openflags of_set_rw(struct openflags flags, int r, int w)
-{
-	flags.r = r;
-	flags.w = w;
-	return flags;
-}
-
-static inline struct openflags of_sync(struct openflags flags)
-{
-	flags.s = 1;
-	return flags;
-}
-
-static inline struct openflags of_create(struct openflags flags)
-{
-	flags.c = 1;
-	return flags;
-}
-
-static inline struct openflags of_trunc(struct openflags flags)
-{
-	flags.t = 1;
-	return flags;
-}
-
-static inline struct openflags of_append(struct openflags flags)
-{
-	flags.a = 1;
-	return flags;
-}
-
-static inline struct openflags of_excl(struct openflags flags)
-{
-	flags.e = 1;
-	return flags;
-}
-
-static inline struct openflags of_cloexec(struct openflags flags)
-{
-	flags.cl = 1;
-	return flags;
-}
-
-/* file.c */
-extern int os_stat_file(const char *file_name, struct uml_stat *buf);
-extern int os_stat_fd(const int fd, struct uml_stat *buf);
-extern int os_access(const char *file, int mode);
-extern int os_set_exec_close(int fd);
-extern int os_ioctl_generic(int fd, unsigned int cmd, unsigned long arg);
-extern int os_get_ifname(int fd, char *namebuf);
-extern int os_set_slip(int fd);
-extern int os_mode_fd(int fd, int mode);
-
-extern int os_seek_file(int fd, unsigned long long offset);
-extern int os_open_file(const char *file, struct openflags flags, int mode);
-extern int os_read_file(int fd, void *buf, int len);
-extern int os_write_file(int fd, const void *buf, int count);
-extern int os_file_size(const char *file, unsigned long long *size_out);
-extern int os_file_modtime(const char *file, unsigned long *modtime);
-extern int os_pipe(int *fd, int stream, int close_on_exec);
-extern int os_set_fd_async(int fd);
-extern int os_clear_fd_async(int fd);
-extern int os_set_fd_block(int fd, int blocking);
-extern int os_accept_connection(int fd);
-extern int os_create_unix_socket(const char *file, int len, int close_on_exec);
-extern int os_shutdown_socket(int fd, int r, int w);
-extern void os_close_file(int fd);
-extern int os_rcv_fd(int fd, int *helper_pid_out);
-extern int create_unix_socket(char *file, int len, int close_on_exec);
-extern int os_connect_socket(const char *name);
-extern int os_file_type(char *file);
-extern int os_file_mode(const char *file, struct openflags *mode_out);
-extern int os_lock_file(int fd, int excl);
-extern void os_flush_stdout(void);
-extern int os_stat_filesystem(char *path, long *bsize_out,
-			      long long *blocks_out, long long *bfree_out,
-			      long long *bavail_out, long long *files_out,
-			      long long *ffree_out, void *fsid_out,
-			      int fsid_size, long *namelen_out,
-			      long *spare_out);
-extern int os_change_dir(char *dir);
-extern int os_fchange_dir(int fd);
-
-/* start_up.c */
-extern void os_early_checks(void);
-extern void can_do_skas(void);
-extern void os_check_bugs(void);
-extern void check_host_supports_tls(int *supports_tls, int *tls_min);
-
-/* mem.c */
-extern int create_mem_file(unsigned long long len);
-
-/* process.c */
-extern unsigned long os_process_pc(int pid);
-extern int os_process_parent(int pid);
-extern void os_stop_process(int pid);
-extern void os_kill_process(int pid, int reap_child);
-extern void os_kill_ptraced_process(int pid, int reap_child);
-extern long os_ptrace_ldt(long pid, long addr, long data);
-
-extern int os_getpid(void);
-extern int os_getpgrp(void);
-
-extern void init_new_thread_signals(void);
-extern int run_kernel_thread(int (*fn)(void *), void *arg, jmp_buf **jmp_ptr);
-
-extern int os_map_memory(void *virt, int fd, unsigned long long off,
-			 unsigned long len, int r, int w, int x);
-extern int os_protect_memory(void *addr, unsigned long len,
-			     int r, int w, int x);
-extern int os_unmap_memory(void *addr, int len);
-extern int os_drop_memory(void *addr, int length);
-extern int can_drop_memory(void);
-extern void os_flush_stdout(void);
-
-/* uaccess.c */
-extern unsigned long __do_user_copy(void *to, const void *from, int n,
-				    void **fault_addr, jmp_buf **fault_catcher,
-				    void (*op)(void *to, const void *from,
-					       int n), int *faulted_out);
-
-/* execvp.c */
-extern int execvp_noalloc(char *buf, const char *file, char *const argv[]);
-/* helper.c */
-extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv);
-extern int run_helper_thread(int (*proc)(void *), void *arg,
-			     unsigned int flags, unsigned long *stack_out);
-extern int helper_wait(int pid);
-
-
-/* tls.c */
-extern int os_set_thread_area(user_desc_t *info, int pid);
-extern int os_get_thread_area(user_desc_t *info, int pid);
-
-/* umid.c */
-extern int umid_file_name(char *name, char *buf, int len);
-extern int set_umid(char *name);
-extern char *get_umid(void);
-
-/* signal.c */
-extern void timer_init(void);
-extern void set_sigstack(void *sig_stack, int size);
-extern void remove_sigstack(void);
-extern void set_handler(int sig, void (*handler)(int), int flags, ...);
-extern int change_sig(int signal, int on);
-extern void block_signals(void);
-extern void unblock_signals(void);
-extern int get_signals(void);
-extern int set_signals(int enable);
-
-/* util.c */
-extern void stack_protections(unsigned long address);
-extern int raw(int fd);
-extern void setup_machinename(char *machine_out);
-extern void setup_hostinfo(char *buf, int len);
-extern void os_dump_core(void) __attribute__ ((noreturn));
-
-/* time.c */
-extern void idle_sleep(unsigned long long nsecs);
-extern int set_interval(void);
-extern int timer_one_shot(int ticks);
-extern long long disable_timer(void);
-extern void uml_idle_timer(void);
-extern long long os_nsecs(void);
-
-/* skas/mem.c */
-extern long run_syscall_stub(struct mm_id * mm_idp,
-			     int syscall, unsigned long *args, long expected,
-			     void **addr, int done);
-extern long syscall_stub_data(struct mm_id * mm_idp,
-			      unsigned long *data, int data_count,
-			      void **addr, void **stub_addr);
-extern int map(struct mm_id * mm_idp, unsigned long virt,
-	       unsigned long len, int prot, int phys_fd,
-	       unsigned long long offset, int done, void **data);
-extern int unmap(struct mm_id * mm_idp, unsigned long addr, unsigned long len,
-		 int done, void **data);
-extern int protect(struct mm_id * mm_idp, unsigned long addr,
-		   unsigned long len, unsigned int prot, int done, void **data);
-
-/* skas/process.c */
-extern int is_skas_winch(int pid, int fd, void *data);
-extern int start_userspace(unsigned long stub_stack);
-extern int copy_context_skas0(unsigned long stack, int pid);
-extern void userspace(struct uml_pt_regs *regs);
-extern int map_stub_pages(int fd, unsigned long code, unsigned long data,
-			  unsigned long stack);
-extern void new_thread(void *stack, jmp_buf *buf, void (*handler)(void));
-extern void switch_threads(jmp_buf *me, jmp_buf *you);
-extern int start_idle_thread(void *stack, jmp_buf *switch_buf);
-extern void initial_thread_cb_skas(void (*proc)(void *),
-				 void *arg);
-extern void halt_skas(void);
-extern void reboot_skas(void);
-
-/* irq.c */
-extern int os_waiting_for_events(struct irq_fd *active_fds);
-extern int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds);
-extern void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
-		struct irq_fd *active_fds, struct irq_fd ***last_irq_ptr2);
-extern void os_free_irq_later(struct irq_fd *active_fds,
-		int irq, void *dev_id);
-extern int os_get_pollfd(int i);
-extern void os_set_pollfd(int i, int fd);
-extern void os_set_ioignore(void);
-
-/* sigio.c */
-extern int add_sigio_fd(int fd);
-extern int ignore_sigio_fd(int fd);
-extern void maybe_sigio_broken(int fd, int read);
-extern void sigio_broken(int fd, int read);
-
-/* sys-x86_64/prctl.c */
-extern int os_arch_prctl(int pid, int code, unsigned long *addr);
-
-/* tty.c */
-extern int get_pty(void);
-
-/* sys-$ARCH/task_size.c */
-extern unsigned long os_get_top_address(void);
-
-#endif
diff --git a/arch/um/include/aio.h b/arch/um/include/shared/aio.h
index 423bae91..423bae91 100644
--- a/arch/um/include/aio.h
+++ b/arch/um/include/shared/aio.h
diff --git a/arch/um/include/arch.h b/arch/um/include/shared/arch.h
index 2de92a0..2de92a0 100644
--- a/arch/um/include/arch.h
+++ b/arch/um/include/shared/arch.h
diff --git a/arch/um/include/shared/as-layout.h b/arch/um/include/shared/as-layout.h
new file mode 100644
index 0000000..a92b678
--- /dev/null
+++ b/arch/um/include/shared/as-layout.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __START_H__
+#define __START_H__
+
+#include "kern_constants.h"
+
+/*
+ * Stolen from linux/const.h, which can't be directly included since
+ * this is used in userspace code, which has no access to the kernel
+ * headers.  Changed to be suitable for adding casts to the start,
+ * rather than "UL" to the end.
+ */
+
+/* Some constant macros are used in both assembler and
+ * C code.  Therefore we cannot annotate them always with
+ * 'UL' and other type specifiers unilaterally.  We
+ * use the following macros to deal with this.
+ */
+
+#ifdef __ASSEMBLY__
+#define _UML_AC(X, Y)	(Y)
+#else
+#define __UML_AC(X, Y)	(X(Y))
+#define _UML_AC(X, Y)	__UML_AC(X, Y)
+#endif
+
+#define STUB_START _UML_AC(, 0x100000)
+#define STUB_CODE _UML_AC((unsigned long), STUB_START)
+#define STUB_DATA _UML_AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
+#define STUB_END _UML_AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
+
+#ifndef __ASSEMBLY__
+
+#include "sysdep/ptrace.h"
+
+struct cpu_task {
+	int pid;
+	void *task;
+};
+
+extern struct cpu_task cpu_tasks[];
+
+extern unsigned long low_physmem;
+extern unsigned long high_physmem;
+extern unsigned long uml_physmem;
+extern unsigned long uml_reserved;
+extern unsigned long end_vm;
+extern unsigned long start_vm;
+extern unsigned long long highmem;
+
+extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end;
+extern unsigned long _unprotected_end;
+extern unsigned long brk_start;
+
+extern unsigned long host_task_size;
+
+extern int linux_main(int argc, char **argv);
+
+extern void (*sig_info[])(int, struct uml_pt_regs *);
+
+#endif
+
+#endif
diff --git a/arch/um/include/chan_kern.h b/arch/um/include/shared/chan_kern.h
index 1e65145..1e65145 100644
--- a/arch/um/include/chan_kern.h
+++ b/arch/um/include/shared/chan_kern.h
diff --git a/arch/um/include/chan_user.h b/arch/um/include/shared/chan_user.h
index 9b9ced8..9b9ced8 100644
--- a/arch/um/include/chan_user.h
+++ b/arch/um/include/shared/chan_user.h
diff --git a/arch/um/include/shared/common-offsets.h b/arch/um/include/shared/common-offsets.h
new file mode 100644
index 0000000..72009c7
--- /dev/null
+++ b/arch/um/include/shared/common-offsets.h
@@ -0,0 +1,54 @@
+/* for use by sys-$SUBARCH/kernel-offsets.c */
+
+DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE);
+
+OFFSET(HOST_TASK_REGS, task_struct, thread.regs);
+OFFSET(HOST_TASK_PID, task_struct, pid);
+
+DEFINE(UM_KERN_PAGE_SIZE, PAGE_SIZE);
+DEFINE(UM_KERN_PAGE_MASK, PAGE_MASK);
+DEFINE(UM_KERN_PAGE_SHIFT, PAGE_SHIFT);
+DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
+
+DEFINE_STR(UM_KERN_EMERG, KERN_EMERG);
+DEFINE_STR(UM_KERN_ALERT, KERN_ALERT);
+DEFINE_STR(UM_KERN_CRIT, KERN_CRIT);
+DEFINE_STR(UM_KERN_ERR, KERN_ERR);
+DEFINE_STR(UM_KERN_WARNING, KERN_WARNING);
+DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE);
+DEFINE_STR(UM_KERN_INFO, KERN_INFO);
+DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG);
+DEFINE_STR(UM_KERN_CONT, KERN_CONT);
+
+DEFINE(UM_ELF_CLASS, ELF_CLASS);
+DEFINE(UM_ELFCLASS32, ELFCLASS32);
+DEFINE(UM_ELFCLASS64, ELFCLASS64);
+
+DEFINE(UM_NR_CPUS, NR_CPUS);
+
+DEFINE(UM_GFP_KERNEL, GFP_KERNEL);
+DEFINE(UM_GFP_ATOMIC, GFP_ATOMIC);
+
+/* For crypto assembler code. */
+DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx));
+
+DEFINE(UM_THREAD_SIZE, THREAD_SIZE);
+
+DEFINE(UM_HZ, HZ);
+
+DEFINE(UM_USEC_PER_SEC, USEC_PER_SEC);
+DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
+DEFINE(UM_NSEC_PER_USEC, NSEC_PER_USEC);
+
+#ifdef CONFIG_PRINTK
+DEFINE(UML_CONFIG_PRINTK, CONFIG_PRINTK);
+#endif
+#ifdef CONFIG_NO_HZ
+DEFINE(UML_CONFIG_NO_HZ, CONFIG_NO_HZ);
+#endif
+#ifdef CONFIG_UML_X86
+DEFINE(UML_CONFIG_UML_X86, CONFIG_UML_X86);
+#endif
+#ifdef CONFIG_64BIT
+DEFINE(UML_CONFIG_64BIT, CONFIG_64BIT);
+#endif
diff --git a/arch/um/include/elf_user.h b/arch/um/include/shared/elf_user.h
index 53516b637..53516b637 100644
--- a/arch/um/include/elf_user.h
+++ b/arch/um/include/shared/elf_user.h
diff --git a/arch/um/include/frame_kern.h b/arch/um/include/shared/frame_kern.h
index ce9514f..ce9514f 100644
--- a/arch/um/include/frame_kern.h
+++ b/arch/um/include/shared/frame_kern.h
diff --git a/arch/um/include/init.h b/arch/um/include/shared/init.h
index 37dd097..37dd097 100644
--- a/arch/um/include/init.h
+++ b/arch/um/include/shared/init.h
diff --git a/arch/um/include/initrd.h b/arch/um/include/shared/initrd.h
index 439b9a8..439b9a8 100644
--- a/arch/um/include/initrd.h
+++ b/arch/um/include/shared/initrd.h
diff --git a/arch/um/include/irq_kern.h b/arch/um/include/shared/irq_kern.h
index fba3895..fba3895 100644
--- a/arch/um/include/irq_kern.h
+++ b/arch/um/include/shared/irq_kern.h
diff --git a/arch/um/include/irq_user.h b/arch/um/include/shared/irq_user.h
index c6c784df..c6c784df 100644
--- a/arch/um/include/irq_user.h
+++ b/arch/um/include/shared/irq_user.h
diff --git a/arch/um/include/kern.h b/arch/um/include/shared/kern.h
index 4ce3fc6..4ce3fc6 100644
--- a/arch/um/include/kern.h
+++ b/arch/um/include/shared/kern.h
diff --git a/arch/um/include/kern_util.h b/arch/um/include/shared/kern_util.h
index 3c34122..3c34122 100644
--- a/arch/um/include/kern_util.h
+++ b/arch/um/include/shared/kern_util.h
diff --git a/arch/um/include/shared/ldt.h b/arch/um/include/shared/ldt.h
new file mode 100644
index 0000000..a7f999a
--- /dev/null
+++ b/arch/um/include/shared/ldt.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
+ * Licensed under the GPL
+ *
+ * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
+ */
+
+#ifndef __ASM_LDT_H
+#define __ASM_LDT_H
+
+#include <linux/mutex.h>
+#include <sysdep/host_ldt.h>
+
+extern void ldt_host_info(void);
+
+#define LDT_PAGES_MAX \
+	((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
+#define LDT_ENTRIES_PER_PAGE \
+	(PAGE_SIZE/LDT_ENTRY_SIZE)
+#define LDT_DIRECT_ENTRIES \
+	((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
+
+struct ldt_entry {
+	__u32 a;
+	__u32 b;
+};
+
+typedef struct uml_ldt {
+	int entry_count;
+	struct mutex lock;
+	union {
+		struct ldt_entry * pages[LDT_PAGES_MAX];
+		struct ldt_entry entries[LDT_DIRECT_ENTRIES];
+	} u;
+} uml_ldt_t;
+
+#endif
diff --git a/arch/um/include/line.h b/arch/um/include/shared/line.h
index 311a0d3..311a0d3 100644
--- a/arch/um/include/line.h
+++ b/arch/um/include/shared/line.h
diff --git a/arch/um/include/longjmp.h b/arch/um/include/shared/longjmp.h
index e860bc584..e860bc584 100644
--- a/arch/um/include/longjmp.h
+++ b/arch/um/include/shared/longjmp.h
diff --git a/arch/um/include/mconsole.h b/arch/um/include/shared/mconsole.h
index c139ae1..c139ae1 100644
--- a/arch/um/include/mconsole.h
+++ b/arch/um/include/shared/mconsole.h
diff --git a/arch/um/include/mconsole_kern.h b/arch/um/include/shared/mconsole_kern.h
index d2fe07e..d2fe07e 100644
--- a/arch/um/include/mconsole_kern.h
+++ b/arch/um/include/shared/mconsole_kern.h
diff --git a/arch/um/include/mem.h b/arch/um/include/shared/mem.h
index 5cd40e9..5cd40e9 100644
--- a/arch/um/include/mem.h
+++ b/arch/um/include/shared/mem.h
diff --git a/arch/um/include/mem_kern.h b/arch/um/include/shared/mem_kern.h
index cb7e196..cb7e196 100644
--- a/arch/um/include/mem_kern.h
+++ b/arch/um/include/shared/mem_kern.h
diff --git a/arch/um/include/mem_user.h b/arch/um/include/shared/mem_user.h
index 46384ac..46384ac 100644
--- a/arch/um/include/mem_user.h
+++ b/arch/um/include/shared/mem_user.h
diff --git a/arch/um/include/net_kern.h b/arch/um/include/shared/net_kern.h
index d843c79..d843c79 100644
--- a/arch/um/include/net_kern.h
+++ b/arch/um/include/shared/net_kern.h
diff --git a/arch/um/include/net_user.h b/arch/um/include/shared/net_user.h
index 63bee15..63bee15 100644
--- a/arch/um/include/net_user.h
+++ b/arch/um/include/shared/net_user.h
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
new file mode 100644
index 0000000..cd40fdd
--- /dev/null
+++ b/arch/um/include/shared/os.h
@@ -0,0 +1,303 @@
+/*
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __OS_H__
+#define __OS_H__
+
+#include <stdarg.h>
+#include "irq_user.h"
+#include "longjmp.h"
+#include "mm_id.h"
+#include "sysdep/tls.h"
+
+#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
+
+#define OS_TYPE_FILE 1
+#define OS_TYPE_DIR 2
+#define OS_TYPE_SYMLINK 3
+#define OS_TYPE_CHARDEV 4
+#define OS_TYPE_BLOCKDEV 5
+#define OS_TYPE_FIFO 6
+#define OS_TYPE_SOCK 7
+
+/* os_access() flags */
+#define OS_ACC_F_OK    0       /* Test for existence.  */
+#define OS_ACC_X_OK    1       /* Test for execute permission.  */
+#define OS_ACC_W_OK    2       /* Test for write permission.  */
+#define OS_ACC_R_OK    4       /* Test for read permission.  */
+#define OS_ACC_RW_OK   (OS_ACC_W_OK | OS_ACC_R_OK) /* Test for RW permission */
+
+/*
+ * types taken from stat_file() in hostfs_user.c
+ * (if they are wrong here, they are wrong there...).
+ */
+struct uml_stat {
+	int                ust_dev;        /* device */
+	unsigned long long ust_ino;        /* inode */
+	int                ust_mode;       /* protection */
+	int                ust_nlink;      /* number of hard links */
+	int                ust_uid;        /* user ID of owner */
+	int                ust_gid;        /* group ID of owner */
+	unsigned long long ust_size;       /* total size, in bytes */
+	int                ust_blksize;    /* blocksize for filesystem I/O */
+	unsigned long long ust_blocks;     /* number of blocks allocated */
+	unsigned long      ust_atime;      /* time of last access */
+	unsigned long      ust_mtime;      /* time of last modification */
+	unsigned long      ust_ctime;      /* time of last change */
+};
+
+struct openflags {
+	unsigned int r : 1;
+	unsigned int w : 1;
+	unsigned int s : 1;	/* O_SYNC */
+	unsigned int c : 1;	/* O_CREAT */
+	unsigned int t : 1;	/* O_TRUNC */
+	unsigned int a : 1;	/* O_APPEND */
+	unsigned int e : 1;	/* O_EXCL */
+	unsigned int cl : 1;    /* FD_CLOEXEC */
+};
+
+#define OPENFLAGS() ((struct openflags) { .r = 0, .w = 0, .s = 0, .c = 0, \
+					  .t = 0, .a = 0, .e = 0, .cl = 0 })
+
+static inline struct openflags of_read(struct openflags flags)
+{
+	flags.r = 1;
+	return flags;
+}
+
+static inline struct openflags of_write(struct openflags flags)
+{
+	flags.w = 1;
+	return flags;
+}
+
+static inline struct openflags of_rdwr(struct openflags flags)
+{
+	return of_read(of_write(flags));
+}
+
+static inline struct openflags of_set_rw(struct openflags flags, int r, int w)
+{
+	flags.r = r;
+	flags.w = w;
+	return flags;
+}
+
+static inline struct openflags of_sync(struct openflags flags)
+{
+	flags.s = 1;
+	return flags;
+}
+
+static inline struct openflags of_create(struct openflags flags)
+{
+	flags.c = 1;
+	return flags;
+}
+
+static inline struct openflags of_trunc(struct openflags flags)
+{
+	flags.t = 1;
+	return flags;
+}
+
+static inline struct openflags of_append(struct openflags flags)
+{
+	flags.a = 1;
+	return flags;
+}
+
+static inline struct openflags of_excl(struct openflags flags)
+{
+	flags.e = 1;
+	return flags;
+}
+
+static inline struct openflags of_cloexec(struct openflags flags)
+{
+	flags.cl = 1;
+	return flags;
+}
+
+/* file.c */
+extern int os_stat_file(const char *file_name, struct uml_stat *buf);
+extern int os_stat_fd(const int fd, struct uml_stat *buf);
+extern int os_access(const char *file, int mode);
+extern int os_set_exec_close(int fd);
+extern int os_ioctl_generic(int fd, unsigned int cmd, unsigned long arg);
+extern int os_get_ifname(int fd, char *namebuf);
+extern int os_set_slip(int fd);
+extern int os_mode_fd(int fd, int mode);
+
+extern int os_seek_file(int fd, unsigned long long offset);
+extern int os_open_file(const char *file, struct openflags flags, int mode);
+extern int os_read_file(int fd, void *buf, int len);
+extern int os_write_file(int fd, const void *buf, int count);
+extern int os_file_size(const char *file, unsigned long long *size_out);
+extern int os_file_modtime(const char *file, unsigned long *modtime);
+extern int os_pipe(int *fd, int stream, int close_on_exec);
+extern int os_set_fd_async(int fd);
+extern int os_clear_fd_async(int fd);
+extern int os_set_fd_block(int fd, int blocking);
+extern int os_accept_connection(int fd);
+extern int os_create_unix_socket(const char *file, int len, int close_on_exec);
+extern int os_shutdown_socket(int fd, int r, int w);
+extern void os_close_file(int fd);
+extern int os_rcv_fd(int fd, int *helper_pid_out);
+extern int create_unix_socket(char *file, int len, int close_on_exec);
+extern int os_connect_socket(const char *name);
+extern int os_file_type(char *file);
+extern int os_file_mode(const char *file, struct openflags *mode_out);
+extern int os_lock_file(int fd, int excl);
+extern void os_flush_stdout(void);
+extern int os_stat_filesystem(char *path, long *bsize_out,
+			      long long *blocks_out, long long *bfree_out,
+			      long long *bavail_out, long long *files_out,
+			      long long *ffree_out, void *fsid_out,
+			      int fsid_size, long *namelen_out,
+			      long *spare_out);
+extern int os_change_dir(char *dir);
+extern int os_fchange_dir(int fd);
+
+/* start_up.c */
+extern void os_early_checks(void);
+extern void can_do_skas(void);
+extern void os_check_bugs(void);
+extern void check_host_supports_tls(int *supports_tls, int *tls_min);
+
+/* mem.c */
+extern int create_mem_file(unsigned long long len);
+
+/* process.c */
+extern unsigned long os_process_pc(int pid);
+extern int os_process_parent(int pid);
+extern void os_stop_process(int pid);
+extern void os_kill_process(int pid, int reap_child);
+extern void os_kill_ptraced_process(int pid, int reap_child);
+extern long os_ptrace_ldt(long pid, long addr, long data);
+
+extern int os_getpid(void);
+extern int os_getpgrp(void);
+
+extern void init_new_thread_signals(void);
+extern int run_kernel_thread(int (*fn)(void *), void *arg, jmp_buf **jmp_ptr);
+
+extern int os_map_memory(void *virt, int fd, unsigned long long off,
+			 unsigned long len, int r, int w, int x);
+extern int os_protect_memory(void *addr, unsigned long len,
+			     int r, int w, int x);
+extern int os_unmap_memory(void *addr, int len);
+extern int os_drop_memory(void *addr, int length);
+extern int can_drop_memory(void);
+extern void os_flush_stdout(void);
+
+/* uaccess.c */
+extern unsigned long __do_user_copy(void *to, const void *from, int n,
+				    void **fault_addr, jmp_buf **fault_catcher,
+				    void (*op)(void *to, const void *from,
+					       int n), int *faulted_out);
+
+/* execvp.c */
+extern int execvp_noalloc(char *buf, const char *file, char *const argv[]);
+/* helper.c */
+extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv);
+extern int run_helper_thread(int (*proc)(void *), void *arg,
+			     unsigned int flags, unsigned long *stack_out);
+extern int helper_wait(int pid);
+
+
+/* tls.c */
+extern int os_set_thread_area(user_desc_t *info, int pid);
+extern int os_get_thread_area(user_desc_t *info, int pid);
+
+/* umid.c */
+extern int umid_file_name(char *name, char *buf, int len);
+extern int set_umid(char *name);
+extern char *get_umid(void);
+
+/* signal.c */
+extern void timer_init(void);
+extern void set_sigstack(void *sig_stack, int size);
+extern void remove_sigstack(void);
+extern void set_handler(int sig, void (*handler)(int), int flags, ...);
+extern int change_sig(int signal, int on);
+extern void block_signals(void);
+extern void unblock_signals(void);
+extern int get_signals(void);
+extern int set_signals(int enable);
+
+/* util.c */
+extern void stack_protections(unsigned long address);
+extern int raw(int fd);
+extern void setup_machinename(char *machine_out);
+extern void setup_hostinfo(char *buf, int len);
+extern void os_dump_core(void) __attribute__ ((noreturn));
+
+/* time.c */
+extern void idle_sleep(unsigned long long nsecs);
+extern int set_interval(void);
+extern int timer_one_shot(int ticks);
+extern long long disable_timer(void);
+extern void uml_idle_timer(void);
+extern long long os_nsecs(void);
+
+/* skas/mem.c */
+extern long run_syscall_stub(struct mm_id * mm_idp,
+			     int syscall, unsigned long *args, long expected,
+			     void **addr, int done);
+extern long syscall_stub_data(struct mm_id * mm_idp,
+			      unsigned long *data, int data_count,
+			      void **addr, void **stub_addr);
+extern int map(struct mm_id * mm_idp, unsigned long virt,
+	       unsigned long len, int prot, int phys_fd,
+	       unsigned long long offset, int done, void **data);
+extern int unmap(struct mm_id * mm_idp, unsigned long addr, unsigned long len,
+		 int done, void **data);
+extern int protect(struct mm_id * mm_idp, unsigned long addr,
+		   unsigned long len, unsigned int prot, int done, void **data);
+
+/* skas/process.c */
+extern int is_skas_winch(int pid, int fd, void *data);
+extern int start_userspace(unsigned long stub_stack);
+extern int copy_context_skas0(unsigned long stack, int pid);
+extern void userspace(struct uml_pt_regs *regs);
+extern int map_stub_pages(int fd, unsigned long code, unsigned long data,
+			  unsigned long stack);
+extern void new_thread(void *stack, jmp_buf *buf, void (*handler)(void));
+extern void switch_threads(jmp_buf *me, jmp_buf *you);
+extern int start_idle_thread(void *stack, jmp_buf *switch_buf);
+extern void initial_thread_cb_skas(void (*proc)(void *),
+				 void *arg);
+extern void halt_skas(void);
+extern void reboot_skas(void);
+
+/* irq.c */
+extern int os_waiting_for_events(struct irq_fd *active_fds);
+extern int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds);
+extern void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
+		struct irq_fd *active_fds, struct irq_fd ***last_irq_ptr2);
+extern void os_free_irq_later(struct irq_fd *active_fds,
+		int irq, void *dev_id);
+extern int os_get_pollfd(int i);
+extern void os_set_pollfd(int i, int fd);
+extern void os_set_ioignore(void);
+
+/* sigio.c */
+extern int add_sigio_fd(int fd);
+extern int ignore_sigio_fd(int fd);
+extern void maybe_sigio_broken(int fd, int read);
+extern void sigio_broken(int fd, int read);
+
+/* sys-x86_64/prctl.c */
+extern int os_arch_prctl(int pid, int code, unsigned long *addr);
+
+/* tty.c */
+extern int get_pty(void);
+
+/* sys-$ARCH/task_size.c */
+extern unsigned long os_get_top_address(void);
+
+#endif
diff --git a/arch/um/include/process.h b/arch/um/include/shared/process.h
index bb873a5..bb873a5 100644
--- a/arch/um/include/process.h
+++ b/arch/um/include/shared/process.h
diff --git a/arch/um/include/ptrace_user.h b/arch/um/include/shared/ptrace_user.h
index 4bce6e0..4bce6e0 100644
--- a/arch/um/include/ptrace_user.h
+++ b/arch/um/include/shared/ptrace_user.h
diff --git a/arch/um/include/registers.h b/arch/um/include/shared/registers.h
index b0b4589..b0b4589 100644
--- a/arch/um/include/registers.h
+++ b/arch/um/include/shared/registers.h
diff --git a/arch/um/include/sigio.h b/arch/um/include/shared/sigio.h
index 434f1a9..434f1a9 100644
--- a/arch/um/include/sigio.h
+++ b/arch/um/include/shared/sigio.h
diff --git a/arch/um/include/skas/mm_id.h b/arch/um/include/shared/skas/mm_id.h
index 48dd098..48dd098 100644
--- a/arch/um/include/skas/mm_id.h
+++ b/arch/um/include/shared/skas/mm_id.h
diff --git a/arch/um/include/skas/proc_mm.h b/arch/um/include/shared/skas/proc_mm.h
index 9028092..9028092 100644
--- a/arch/um/include/skas/proc_mm.h
+++ b/arch/um/include/shared/skas/proc_mm.h
diff --git a/arch/um/include/skas/skas.h b/arch/um/include/shared/skas/skas.h
index 64d2c74..64d2c74 100644
--- a/arch/um/include/skas/skas.h
+++ b/arch/um/include/shared/skas/skas.h
diff --git a/arch/um/include/skas/stub-data.h b/arch/um/include/shared/skas/stub-data.h
index f6ed92c..f6ed92c 100644
--- a/arch/um/include/skas/stub-data.h
+++ b/arch/um/include/shared/skas/stub-data.h
diff --git a/arch/um/include/skas_ptrace.h b/arch/um/include/shared/skas_ptrace.h
index 3d31bba..3d31bba 100644
--- a/arch/um/include/skas_ptrace.h
+++ b/arch/um/include/shared/skas_ptrace.h
diff --git a/arch/um/include/skas_ptregs.h b/arch/um/include/shared/skas_ptregs.h
index 73db19e..73db19e 100644
--- a/arch/um/include/skas_ptregs.h
+++ b/arch/um/include/shared/skas_ptregs.h
diff --git a/arch/um/include/syscall.h b/arch/um/include/shared/syscall.h
index dda1df9..dda1df9 100644
--- a/arch/um/include/syscall.h
+++ b/arch/um/include/shared/syscall.h
diff --git a/arch/um/include/sysrq.h b/arch/um/include/shared/sysrq.h
index c8d332b..c8d332b 100644
--- a/arch/um/include/sysrq.h
+++ b/arch/um/include/shared/sysrq.h
diff --git a/arch/um/include/task.h b/arch/um/include/shared/task.h
index 3fe726b..3fe726b 100644
--- a/arch/um/include/task.h
+++ b/arch/um/include/shared/task.h
diff --git a/arch/um/include/tlb.h b/arch/um/include/shared/tlb.h
index ecd2265..ecd2265 100644
--- a/arch/um/include/tlb.h
+++ b/arch/um/include/shared/tlb.h
diff --git a/arch/um/include/ubd_user.h b/arch/um/include/shared/ubd_user.h
index bb66517..bb66517 100644
--- a/arch/um/include/ubd_user.h
+++ b/arch/um/include/shared/ubd_user.h
diff --git a/arch/um/include/um_malloc.h b/arch/um/include/shared/um_malloc.h
index c554d70..c554d70 100644
--- a/arch/um/include/um_malloc.h
+++ b/arch/um/include/shared/um_malloc.h
diff --git a/arch/um/include/shared/um_mmu.h b/arch/um/include/shared/um_mmu.h
new file mode 100644
index 0000000..b1a7e47
--- /dev/null
+++ b/arch/um/include/shared/um_mmu.h
@@ -0,0 +1,24 @@
+/* 
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __ARCH_UM_MMU_H
+#define __ARCH_UM_MMU_H
+
+#include "mm_id.h"
+#include "ldt.h"
+
+typedef struct mm_context {
+	struct mm_id id;
+	struct uml_ldt ldt;
+	struct page **stub_pages;
+} mm_context_t;
+
+extern void __switch_mm(struct mm_id * mm_idp);
+
+/* Avoid tangled inclusion with asm/ldt.h */
+extern long init_new_ldt(struct mm_context *to_mm, struct mm_context *from_mm);
+extern void free_ldt(struct mm_context *mm);
+
+#endif
diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/shared/um_uaccess.h
index 45c0499..45c0499 100644
--- a/arch/um/include/um_uaccess.h
+++ b/arch/um/include/shared/um_uaccess.h
diff --git a/arch/um/include/shared/user.h b/arch/um/include/shared/user.h
new file mode 100644
index 0000000..293f7c7
--- /dev/null
+++ b/arch/um/include/shared/user.h
@@ -0,0 +1,45 @@
+/* 
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __USER_H__
+#define __USER_H__
+
+#include "kern_constants.h"
+
+/*
+ * The usual definition - copied here because the kernel provides its own,
+ * fancier, type-safe, definition.  Using that one would require
+ * copying too much infrastructure for my taste, so userspace files
+ * get less checking than kernel files.
+ */
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/* This is to get size_t */
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stddef.h>
+#endif
+
+extern void panic(const char *fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+
+#ifdef UML_CONFIG_PRINTK
+extern int printk(const char *fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+#else
+static inline int printk(const char *fmt, ...)
+{
+	return 0;
+}
+#endif
+
+extern void schedule(void);
+extern int in_aton(char *str);
+extern int open_gdb_chan(void);
+extern size_t strlcpy(char *, const char *, size_t);
+extern size_t strlcat(char *, const char *, size_t);
+
+#endif
diff --git a/arch/um/include/sigcontext.h b/arch/um/include/sigcontext.h
deleted file mode 100644
index 59816ca..0000000
--- a/arch/um/include/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* 
- * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __UML_SIGCONTEXT_H__
-#define __UML_SIGCONTEXT_H__
-
-#include "sysdep/sigcontext.h"
-
-extern int sc_size(void *data);
-extern void sc_to_sc(void *to_ptr, void *from_ptr);
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h
deleted file mode 100644
index 11c0896..0000000
--- a/arch/um/include/sysdep-i386/ptrace.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_I386_PTRACE_H
-#define __SYSDEP_I386_PTRACE_H
-
-#include "uml-config.h"
-#include "user_constants.h"
-#include "sysdep/faultinfo.h"
-
-#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
-#define MAX_REG_OFFSET (UM_FRAME_SIZE)
-
-static inline void update_debugregs(int seq) {}
-
-/* syscall emulation path in ptrace */
-
-#ifndef PTRACE_SYSEMU
-#define PTRACE_SYSEMU 31
-#endif
-
-void set_using_sysemu(int value);
-int get_using_sysemu(void);
-extern int sysemu_supported;
-
-#include "skas_ptregs.h"
-
-#define REGS_IP(r) ((r)[HOST_IP])
-#define REGS_SP(r) ((r)[HOST_SP])
-#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
-#define REGS_EAX(r) ((r)[HOST_EAX])
-#define REGS_EBX(r) ((r)[HOST_EBX])
-#define REGS_ECX(r) ((r)[HOST_ECX])
-#define REGS_EDX(r) ((r)[HOST_EDX])
-#define REGS_ESI(r) ((r)[HOST_ESI])
-#define REGS_EDI(r) ((r)[HOST_EDI])
-#define REGS_EBP(r) ((r)[HOST_EBP])
-#define REGS_CS(r) ((r)[HOST_CS])
-#define REGS_SS(r) ((r)[HOST_SS])
-#define REGS_DS(r) ((r)[HOST_DS])
-#define REGS_ES(r) ((r)[HOST_ES])
-#define REGS_FS(r) ((r)[HOST_FS])
-#define REGS_GS(r) ((r)[HOST_GS])
-
-#define REGS_SET_SYSCALL_RETURN(r, res) REGS_EAX(r) = (res)
-
-#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
-
-#ifndef PTRACE_SYSEMU_SINGLESTEP
-#define PTRACE_SYSEMU_SINGLESTEP 32
-#endif
-
-struct uml_pt_regs {
-	unsigned long gp[MAX_REG_NR];
-	struct faultinfo faultinfo;
-	long syscall;
-	int is_user;
-};
-
-#define EMPTY_UML_PT_REGS { }
-
-#define UPT_IP(r) REGS_IP((r)->gp)
-#define UPT_SP(r) REGS_SP((r)->gp)
-#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
-#define UPT_EAX(r) REGS_EAX((r)->gp)
-#define UPT_EBX(r) REGS_EBX((r)->gp)
-#define UPT_ECX(r) REGS_ECX((r)->gp)
-#define UPT_EDX(r) REGS_EDX((r)->gp)
-#define UPT_ESI(r) REGS_ESI((r)->gp)
-#define UPT_EDI(r) REGS_EDI((r)->gp)
-#define UPT_EBP(r) REGS_EBP((r)->gp)
-#define UPT_ORIG_EAX(r) ((r)->syscall)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_SS(r) REGS_SS((r)->gp)
-#define UPT_DS(r) REGS_DS((r)->gp)
-#define UPT_ES(r) REGS_ES((r)->gp)
-#define UPT_FS(r) REGS_FS((r)->gp)
-#define UPT_GS(r) REGS_GS((r)->gp)
-
-#define UPT_SYSCALL_ARG1(r) UPT_EBX(r)
-#define UPT_SYSCALL_ARG2(r) UPT_ECX(r)
-#define UPT_SYSCALL_ARG3(r) UPT_EDX(r)
-#define UPT_SYSCALL_ARG4(r) UPT_ESI(r)
-#define UPT_SYSCALL_ARG5(r) UPT_EDI(r)
-#define UPT_SYSCALL_ARG6(r) UPT_EBP(r)
-
-extern int user_context(unsigned long sp);
-
-#define UPT_IS_USER(r) ((r)->is_user)
-
-struct syscall_args {
-	unsigned long args[6];
-};
-
-#define SYSCALL_ARGS(r) ((struct syscall_args) \
-			 { .args = { UPT_SYSCALL_ARG1(r),	\
-				     UPT_SYSCALL_ARG2(r),	\
-				     UPT_SYSCALL_ARG3(r),	\
-				     UPT_SYSCALL_ARG4(r),	\
-				     UPT_SYSCALL_ARG5(r),	\
-				     UPT_SYSCALL_ARG6(r) } } )
-
-#define UPT_REG(regs, reg) \
-	({	unsigned long val; \
-		switch(reg){ \
-		case EIP: val = UPT_IP(regs); break; \
-		case UESP: val = UPT_SP(regs); break; \
-		case EAX: val = UPT_EAX(regs); break; \
-		case EBX: val = UPT_EBX(regs); break; \
-		case ECX: val = UPT_ECX(regs); break; \
-		case EDX: val = UPT_EDX(regs); break; \
-		case ESI: val = UPT_ESI(regs); break; \
-		case EDI: val = UPT_EDI(regs); break; \
-		case EBP: val = UPT_EBP(regs); break; \
-		case ORIG_EAX: val = UPT_ORIG_EAX(regs); break; \
-		case CS: val = UPT_CS(regs); break; \
-		case SS: val = UPT_SS(regs); break; \
-		case DS: val = UPT_DS(regs); break; \
-		case ES: val = UPT_ES(regs); break; \
-		case FS: val = UPT_FS(regs); break; \
-		case GS: val = UPT_GS(regs); break; \
-		case EFL: val = UPT_EFLAGS(regs); break; \
-		default :  \
-			panic("Bad register in UPT_REG : %d\n", reg);  \
-			val = -1; \
-		} \
-	        val; \
-	})
-
-#define UPT_SET(regs, reg, val) \
-	do { \
-		switch(reg){ \
-		case EIP: UPT_IP(regs) = val; break; \
-		case UESP: UPT_SP(regs) = val; break; \
-		case EAX: UPT_EAX(regs) = val; break; \
-		case EBX: UPT_EBX(regs) = val; break; \
-		case ECX: UPT_ECX(regs) = val; break; \
-		case EDX: UPT_EDX(regs) = val; break; \
-		case ESI: UPT_ESI(regs) = val; break; \
-		case EDI: UPT_EDI(regs) = val; break; \
-		case EBP: UPT_EBP(regs) = val; break; \
-		case ORIG_EAX: UPT_ORIG_EAX(regs) = val; break; \
-		case CS: UPT_CS(regs) = val; break; \
-		case SS: UPT_SS(regs) = val; break; \
-		case DS: UPT_DS(regs) = val; break; \
-		case ES: UPT_ES(regs) = val; break; \
-		case FS: UPT_FS(regs) = val; break; \
-		case GS: UPT_GS(regs) = val; break; \
-		case EFL: UPT_EFLAGS(regs) = val; break; \
-		default :  \
-			panic("Bad register in UPT_SET : %d\n", reg);  \
-			break; \
-		} \
-	} while (0)
-
-#define UPT_SET_SYSCALL_RETURN(r, res) \
-	REGS_SET_SYSCALL_RETURN((r)->regs, (res))
-
-#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
-
-#define UPT_ORIG_SYSCALL(r) UPT_EAX(r)
-#define UPT_SYSCALL_NR(r) UPT_ORIG_EAX(r)
-#define UPT_SYSCALL_RET(r) UPT_EAX(r)
-
-#define UPT_FAULTINFO(r) (&(r)->faultinfo)
-
-extern void arch_init_registers(int pid);
-
-#endif
diff --git a/arch/um/include/sysdep-i386/stub.h b/arch/um/include/sysdep-i386/stub.h
deleted file mode 100644
index 8c097b8..0000000
--- a/arch/um/include/sysdep-i386/stub.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_STUB_H
-#define __SYSDEP_STUB_H
-
-#include <sys/mman.h>
-#include <asm/ptrace.h>
-#include <asm/unistd.h>
-#include "as-layout.h"
-#include "stub-data.h"
-#include "kern_constants.h"
-#include "uml-config.h"
-
-extern void stub_segv_handler(int sig);
-extern void stub_clone_handler(void);
-
-#define STUB_SYSCALL_RET EAX
-#define STUB_MMAP_NR __NR_mmap2
-#define MMAP_OFFSET(o) ((o) >> UM_KERN_PAGE_SHIFT)
-
-static inline long stub_syscall0(long syscall)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall));
-
-	return ret;
-}
-
-static inline long stub_syscall1(long syscall, long arg1)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1));
-
-	return ret;
-}
-
-static inline long stub_syscall2(long syscall, long arg1, long arg2)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2));
-
-	return ret;
-}
-
-static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2), "d" (arg3));
-
-	return ret;
-}
-
-static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
-				 long arg4)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2), "d" (arg3), "S" (arg4));
-
-	return ret;
-}
-
-static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
-				 long arg4, long arg5)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5));
-
-	return ret;
-}
-
-static inline void trap_myself(void)
-{
-	__asm("int3");
-}
-
-static inline void remap_stack(int fd, unsigned long offset)
-{
-	__asm__ volatile ("movl %%eax,%%ebp ; movl %0,%%eax ; int $0x80 ;"
-			  "movl %7, %%ebx ; movl %%eax, (%%ebx)"
-			  : : "g" (STUB_MMAP_NR), "b" (STUB_DATA),
-			    "c" (UM_KERN_PAGE_SIZE),
-			    "d" (PROT_READ | PROT_WRITE),
-			    "S" (MAP_FIXED | MAP_SHARED), "D" (fd),
-			    "a" (offset),
-			    "i" (&((struct stub_data *) STUB_DATA)->err)
-			  : "memory");
-}
-
-#endif
diff --git a/arch/um/include/sysdep-i386/tls.h b/arch/um/include/sysdep-i386/tls.h
deleted file mode 100644
index 918fd3c..0000000
--- a/arch/um/include/sysdep-i386/tls.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _SYSDEP_TLS_H
-#define _SYSDEP_TLS_H
-
-# ifndef __KERNEL__
-
-/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
- * may be named user_desc (but in 2.4 and in header matching its API was named
- * modify_ldt_ldt_s). */
-
-typedef struct um_dup_user_desc {
-	unsigned int  entry_number;
-	unsigned int  base_addr;
-	unsigned int  limit;
-	unsigned int  seg_32bit:1;
-	unsigned int  contents:2;
-	unsigned int  read_exec_only:1;
-	unsigned int  limit_in_pages:1;
-	unsigned int  seg_not_present:1;
-	unsigned int  useable:1;
-} user_desc_t;
-
-# else /* __KERNEL__ */
-
-#  include <asm/ldt.h>
-typedef struct user_desc user_desc_t;
-
-# endif /* __KERNEL__ */
-
-#define GDT_ENTRY_TLS_MIN_I386 6
-#define GDT_ENTRY_TLS_MIN_X86_64 12
-
-#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h
deleted file mode 100644
index 9ea44d1..0000000
--- a/arch/um/include/sysdep-x86_64/ptrace.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- *
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_PTRACE_H
-#define __SYSDEP_X86_64_PTRACE_H
-
-#include "uml-config.h"
-#include "user_constants.h"
-#include "sysdep/faultinfo.h"
-
-#define MAX_REG_OFFSET (UM_FRAME_SIZE)
-#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
-
-#include "skas_ptregs.h"
-
-#define REGS_IP(r) ((r)[HOST_IP])
-#define REGS_SP(r) ((r)[HOST_SP])
-
-#define REGS_RBX(r) ((r)[HOST_RBX])
-#define REGS_RCX(r) ((r)[HOST_RCX])
-#define REGS_RDX(r) ((r)[HOST_RDX])
-#define REGS_RSI(r) ((r)[HOST_RSI])
-#define REGS_RDI(r) ((r)[HOST_RDI])
-#define REGS_RBP(r) ((r)[HOST_RBP])
-#define REGS_RAX(r) ((r)[HOST_RAX])
-#define REGS_R8(r) ((r)[HOST_R8])
-#define REGS_R9(r) ((r)[HOST_R9])
-#define REGS_R10(r) ((r)[HOST_R10])
-#define REGS_R11(r) ((r)[HOST_R11])
-#define REGS_R12(r) ((r)[HOST_R12])
-#define REGS_R13(r) ((r)[HOST_R13])
-#define REGS_R14(r) ((r)[HOST_R14])
-#define REGS_R15(r) ((r)[HOST_R15])
-#define REGS_CS(r) ((r)[HOST_CS])
-#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
-#define REGS_SS(r) ((r)[HOST_SS])
-
-#define HOST_FS_BASE 21
-#define HOST_GS_BASE 22
-#define HOST_DS 23
-#define HOST_ES 24
-#define HOST_FS 25
-#define HOST_GS 26
-
-/* Also defined in asm/ptrace-x86_64.h, but not in libc headers.  So, these
- * are already defined for kernel code, but not for userspace code.
- */
-#ifndef FS_BASE
-/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
- * which is what x86_64 ptrace actually uses.
- */
-#define FS_BASE (HOST_FS_BASE * sizeof(long))
-#define GS_BASE (HOST_GS_BASE * sizeof(long))
-#define DS (HOST_DS * sizeof(long))
-#define ES (HOST_ES * sizeof(long))
-#define FS (HOST_FS * sizeof(long))
-#define GS (HOST_GS * sizeof(long))
-#endif
-
-#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
-#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
-#define REGS_DS(r) ((r)[HOST_DS])
-#define REGS_ES(r) ((r)[HOST_ES])
-#define REGS_FS(r) ((r)[HOST_FS])
-#define REGS_GS(r) ((r)[HOST_GS])
-
-#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_RAX])
-
-#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
-
-#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
-
-#define REGS_SEGV_IS_FIXABLE(r) SEGV_IS_FIXABLE((r)->trap_type)
-
-#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
-
-#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
-
-#define REGS_TRAP(r) ((r)->trap_type)
-
-#define REGS_ERR(r) ((r)->fault_type)
-
-struct uml_pt_regs {
-	unsigned long gp[MAX_REG_NR];
-	struct faultinfo faultinfo;
-	long syscall;
-	int is_user;
-};
-
-#define EMPTY_UML_PT_REGS { }
-
-#define UPT_RBX(r) REGS_RBX((r)->gp)
-#define UPT_RCX(r) REGS_RCX((r)->gp)
-#define UPT_RDX(r) REGS_RDX((r)->gp)
-#define UPT_RSI(r) REGS_RSI((r)->gp)
-#define UPT_RDI(r) REGS_RDI((r)->gp)
-#define UPT_RBP(r) REGS_RBP((r)->gp)
-#define UPT_RAX(r) REGS_RAX((r)->gp)
-#define UPT_R8(r) REGS_R8((r)->gp)
-#define UPT_R9(r) REGS_R9((r)->gp)
-#define UPT_R10(r) REGS_R10((r)->gp)
-#define UPT_R11(r) REGS_R11((r)->gp)
-#define UPT_R12(r) REGS_R12((r)->gp)
-#define UPT_R13(r) REGS_R13((r)->gp)
-#define UPT_R14(r) REGS_R14((r)->gp)
-#define UPT_R15(r) REGS_R15((r)->gp)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_FS_BASE(r) REGS_FS_BASE((r)->gp)
-#define UPT_FS(r) REGS_FS((r)->gp)
-#define UPT_GS_BASE(r) REGS_GS_BASE((r)->gp)
-#define UPT_GS(r) REGS_GS((r)->gp)
-#define UPT_DS(r) REGS_DS((r)->gp)
-#define UPT_ES(r) REGS_ES((r)->gp)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_SS(r) REGS_SS((r)->gp)
-#define UPT_ORIG_RAX(r) REGS_ORIG_RAX((r)->gp)
-
-#define UPT_IP(r) REGS_IP((r)->gp)
-#define UPT_SP(r) REGS_SP((r)->gp)
-
-#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
-#define UPT_SYSCALL_NR(r) ((r)->syscall)
-#define UPT_SYSCALL_RET(r) UPT_RAX(r)
-
-extern int user_context(unsigned long sp);
-
-#define UPT_IS_USER(r) ((r)->is_user)
-
-#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
-#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
-#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
-#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
-#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
-#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
-
-struct syscall_args {
-	unsigned long args[6];
-};
-
-#define SYSCALL_ARGS(r) ((struct syscall_args) \
-			 { .args = { UPT_SYSCALL_ARG1(r),	 \
-				     UPT_SYSCALL_ARG2(r),	 \
-				     UPT_SYSCALL_ARG3(r),	 \
-				     UPT_SYSCALL_ARG4(r),	 \
-				     UPT_SYSCALL_ARG5(r),	 \
-				     UPT_SYSCALL_ARG6(r) } } )
-
-#define UPT_REG(regs, reg) \
-	({      unsigned long val;		\
-		switch(reg){						\
-		case R8: val = UPT_R8(regs); break;			\
-		case R9: val = UPT_R9(regs); break;			\
-		case R10: val = UPT_R10(regs); break;			\
-		case R11: val = UPT_R11(regs); break;			\
-		case R12: val = UPT_R12(regs); break;			\
-		case R13: val = UPT_R13(regs); break;			\
-		case R14: val = UPT_R14(regs); break;			\
-		case R15: val = UPT_R15(regs); break;			\
-		case RIP: val = UPT_IP(regs); break;			\
-		case RSP: val = UPT_SP(regs); break;			\
-		case RAX: val = UPT_RAX(regs); break;			\
-		case RBX: val = UPT_RBX(regs); break;			\
-		case RCX: val = UPT_RCX(regs); break;			\
-		case RDX: val = UPT_RDX(regs); break;			\
-		case RSI: val = UPT_RSI(regs); break;			\
-		case RDI: val = UPT_RDI(regs); break;			\
-		case RBP: val = UPT_RBP(regs); break;			\
-		case ORIG_RAX: val = UPT_ORIG_RAX(regs); break;		\
-		case CS: val = UPT_CS(regs); break;			\
-		case SS: val = UPT_SS(regs); break;			\
-		case FS_BASE: val = UPT_FS_BASE(regs); break;		\
-		case GS_BASE: val = UPT_GS_BASE(regs); break;		\
-		case DS: val = UPT_DS(regs); break;			\
-		case ES: val = UPT_ES(regs); break;			\
-		case FS : val = UPT_FS (regs); break;			\
-		case GS: val = UPT_GS(regs); break;			\
-		case EFLAGS: val = UPT_EFLAGS(regs); break;		\
-		default :						\
-			panic("Bad register in UPT_REG : %d\n", reg);	\
-			val = -1;					\
-		}							\
-		val;							\
-	})
-
-
-#define UPT_SET(regs, reg, val) \
-	({      unsigned long __upt_val = val;	\
-		switch(reg){						\
-		case R8: UPT_R8(regs) = __upt_val; break;		\
-		case R9: UPT_R9(regs) = __upt_val; break;		\
-		case R10: UPT_R10(regs) = __upt_val; break;		\
-		case R11: UPT_R11(regs) = __upt_val; break;		\
-		case R12: UPT_R12(regs) = __upt_val; break;		\
-		case R13: UPT_R13(regs) = __upt_val; break;		\
-		case R14: UPT_R14(regs) = __upt_val; break;		\
-		case R15: UPT_R15(regs) = __upt_val; break;		\
-		case RIP: UPT_IP(regs) = __upt_val; break;		\
-		case RSP: UPT_SP(regs) = __upt_val; break;		\
-		case RAX: UPT_RAX(regs) = __upt_val; break;		\
-		case RBX: UPT_RBX(regs) = __upt_val; break;		\
-		case RCX: UPT_RCX(regs) = __upt_val; break;		\
-		case RDX: UPT_RDX(regs) = __upt_val; break;		\
-		case RSI: UPT_RSI(regs) = __upt_val; break;		\
-		case RDI: UPT_RDI(regs) = __upt_val; break;		\
-		case RBP: UPT_RBP(regs) = __upt_val; break;		\
-		case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break;	\
-		case CS: UPT_CS(regs) = __upt_val; break;		\
-		case SS: UPT_SS(regs) = __upt_val; break;		\
-		case FS_BASE: UPT_FS_BASE(regs) = __upt_val; break;	\
-		case GS_BASE: UPT_GS_BASE(regs) = __upt_val; break;	\
-		case DS: UPT_DS(regs) = __upt_val; break;		\
-		case ES: UPT_ES(regs) = __upt_val; break;		\
-		case FS: UPT_FS(regs) = __upt_val; break;		\
-		case GS: UPT_GS(regs) = __upt_val; break;		\
-		case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break;	\
-		default :						\
-			panic("Bad register in UPT_SET : %d\n", reg);	\
-			break;						\
-		}							\
-		__upt_val;						\
-	})
-
-#define UPT_SET_SYSCALL_RETURN(r, res) \
-	REGS_SET_SYSCALL_RETURN((r)->regs, (res))
-
-#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
-
-#define UPT_SEGV_IS_FIXABLE(r) REGS_SEGV_IS_FIXABLE(&r->skas)
-
-#define UPT_FAULTINFO(r) (&(r)->faultinfo)
-
-static inline void arch_init_registers(int pid)
-{
-}
-
-#endif
diff --git a/arch/um/include/sysdep-x86_64/stub.h b/arch/um/include/sysdep-x86_64/stub.h
deleted file mode 100644
index 655f9c2..0000000
--- a/arch/um/include/sysdep-x86_64/stub.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_STUB_H
-#define __SYSDEP_STUB_H
-
-#include <sys/mman.h>
-#include <asm/unistd.h>
-#include <sysdep/ptrace_user.h>
-#include "as-layout.h"
-#include "stub-data.h"
-#include "kern_constants.h"
-#include "uml-config.h"
-
-extern void stub_segv_handler(int sig);
-extern void stub_clone_handler(void);
-
-#define STUB_SYSCALL_RET PT_INDEX(RAX)
-#define STUB_MMAP_NR __NR_mmap
-#define MMAP_OFFSET(o) (o)
-
-#define __syscall_clobber "r11","rcx","memory"
-#define __syscall "syscall"
-
-static inline long stub_syscall0(long syscall)
-{
-	long ret;
-
-	__asm__ volatile (__syscall
-		: "=a" (ret)
-		: "0" (syscall) : __syscall_clobber );
-
-	return ret;
-}
-
-static inline long stub_syscall2(long syscall, long arg1, long arg2)
-{
-	long ret;
-
-	__asm__ volatile (__syscall
-		: "=a" (ret)
-		: "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber );
-
-	return ret;
-}
-
-static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
-{
-	long ret;
-
-	__asm__ volatile (__syscall
-		: "=a" (ret)
-		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3)
-		: __syscall_clobber );
-
-	return ret;
-}
-
-static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
-				 long arg4)
-{
-	long ret;
-
-	__asm__ volatile ("movq %5,%%r10 ; " __syscall
-		: "=a" (ret)
-		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
-		  "g" (arg4)
-		: __syscall_clobber, "r10" );
-
-	return ret;
-}
-
-static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
-				 long arg4, long arg5)
-{
-	long ret;
-
-	__asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall
-		: "=a" (ret)
-		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
-		  "g" (arg4), "g" (arg5)
-		: __syscall_clobber, "r10", "r8" );
-
-	return ret;
-}
-
-static inline void trap_myself(void)
-{
-	__asm("int3");
-}
-
-static inline void remap_stack(long fd, unsigned long offset)
-{
-	__asm__ volatile ("movq %4,%%r10 ; movq %5,%%r8 ; "
-			  "movq %6, %%r9; " __syscall "; movq %7, %%rbx ; "
-			  "movq %%rax, (%%rbx)":
-			  : "a" (STUB_MMAP_NR), "D" (STUB_DATA),
-			    "S" (UM_KERN_PAGE_SIZE),
-			    "d" (PROT_READ | PROT_WRITE),
-                            "g" (MAP_FIXED | MAP_SHARED), "g" (fd),
-			    "g" (offset),
-			    "i" (&((struct stub_data *) STUB_DATA)->err)
-			  : __syscall_clobber, "r10", "r8", "r9" );
-}
-
-#endif
diff --git a/arch/um/include/sysdep-x86_64/tls.h b/arch/um/include/sysdep-x86_64/tls.h
deleted file mode 100644
index 35f19f2..0000000
--- a/arch/um/include/sysdep-x86_64/tls.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _SYSDEP_TLS_H
-#define _SYSDEP_TLS_H
-
-# ifndef __KERNEL__
-
-/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
- * may be named user_desc (but in 2.4 and in header matching its API was named
- * modify_ldt_ldt_s). */
-
-typedef struct um_dup_user_desc {
-	unsigned int  entry_number;
-	unsigned int  base_addr;
-	unsigned int  limit;
-	unsigned int  seg_32bit:1;
-	unsigned int  contents:2;
-	unsigned int  read_exec_only:1;
-	unsigned int  limit_in_pages:1;
-	unsigned int  seg_not_present:1;
-	unsigned int  useable:1;
-	unsigned int  lm:1;
-} user_desc_t;
-
-# else /* __KERNEL__ */
-
-#  include <asm/ldt.h>
-typedef struct user_desc user_desc_t;
-
-# endif /* __KERNEL__ */
-#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/include/um_mmu.h b/arch/um/include/um_mmu.h
deleted file mode 100644
index f575ff9..0000000
--- a/arch/um/include/um_mmu.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* 
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __ARCH_UM_MMU_H
-#define __ARCH_UM_MMU_H
-
-#include "uml-config.h"
-#include "mm_id.h"
-#include "asm/ldt.h"
-
-typedef struct mm_context {
-	struct mm_id id;
-	struct uml_ldt ldt;
-	struct page **stub_pages;
-} mm_context_t;
-
-extern void __switch_mm(struct mm_id * mm_idp);
-
-/* Avoid tangled inclusion with asm/ldt.h */
-extern long init_new_ldt(struct mm_context *to_mm, struct mm_context *from_mm);
-extern void free_ldt(struct mm_context *mm);
-
-#endif
diff --git a/arch/um/include/user.h b/arch/um/include/user.h
deleted file mode 100644
index 1723fac..0000000
--- a/arch/um/include/user.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* 
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __USER_H__
-#define __USER_H__
-
-#include "uml-config.h"
-
-/*
- * The usual definition - copied here because the kernel provides its own,
- * fancier, type-safe, definition.  Using that one would require
- * copying too much infrastructure for my taste, so userspace files
- * get less checking than kernel files.
- */
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-/* This is to get size_t */
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <stddef.h>
-#endif
-
-extern void panic(const char *fmt, ...)
-	__attribute__ ((format (printf, 1, 2)));
-
-#ifdef UML_CONFIG_PRINTK
-extern int printk(const char *fmt, ...)
-	__attribute__ ((format (printf, 1, 2)));
-#else
-static inline int printk(const char *fmt, ...)
-{
-	return 0;
-}
-#endif
-
-extern void schedule(void);
-extern int in_aton(char *str);
-extern int open_gdb_chan(void);
-extern size_t strlcpy(char *, const char *, size_t);
-extern size_t strlcat(char *, const char *, size_t);
-
-#endif
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index f5d7f45..fda30d2 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -15,6 +15,7 @@
 #include "mem_user.h"
 #include "skas.h"
 #include "os.h"
+#include "internal.h"
 
 void flush_thread(void)
 {
@@ -42,23 +43,11 @@ void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
 	PT_REGS_SP(regs) = esp;
 }
 
-#ifdef CONFIG_TTY_LOG
-extern void log_exec(char **argv, void *tty);
-#endif
-
 static long execve1(char *file, char __user * __user *argv,
 		    char __user *__user *env)
 {
 	long error;
-#ifdef CONFIG_TTY_LOG
-	struct tty_struct *tty;
 
-	mutex_lock(&tty_mutex);
-	tty = get_current_tty();
-	if (tty)
-		log_exec(argv, tty);
-	mutex_unlock(&tty_mutex);
-#endif
 	error = do_execve(file, argv, env, &current->thread.regs);
 	if (error == 0) {
 		task_lock(current);
diff --git a/arch/um/kernel/internal.h b/arch/um/kernel/internal.h
new file mode 100644
index 0000000..3bda43c
--- /dev/null
+++ b/arch/um/kernel/internal.h
@@ -0,0 +1 @@
+extern long um_execve(char *file, char __user *__user *argv, char __user *__user *env);
diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index b0fce72..b5c094c 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -11,7 +11,7 @@
 #include <asm/unistd.h>
 #include "frame_kern.h"
 #include "kern_util.h"
-#include "sigcontext.h"
+#include <sysdep/sigcontext.h>
 
 EXPORT_SYMBOL(block_signals);
 EXPORT_SYMBOL(unblock_signals);
diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c
index be2d50c..0457721 100644
--- a/arch/um/kernel/smp.c
+++ b/arch/um/kernel/smp.c
@@ -85,6 +85,7 @@ static int idle_proc(void *cpup)
 	while (!cpu_isset(cpu, smp_commenced_mask))
 		cpu_relax();
 
+	notify_cpu_starting(cpu);
 	cpu_set(cpu, cpu_online_map);
 	default_idle();
 	return 0;
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index 128ee85..c4df705 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -12,6 +12,7 @@
 #include "asm/mman.h"
 #include "asm/uaccess.h"
 #include "asm/unistd.h"
+#include "internal.h"
 
 long sys_fork(void)
 {
diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile
index 8a48d6a..d66f038 100644
--- a/arch/um/os-Linux/Makefile
+++ b/arch/um/os-Linux/Makefile
@@ -7,9 +7,6 @@ obj-y = aio.o elf_aux.o execvp.o file.o helper.o irq.o main.o mem.o process.o \
 	registers.o sigio.o signal.o start_up.o time.o tty.o uaccess.o \
 	umid.o tls.o user_syms.o util.o drivers/ sys-$(SUBARCH)/ skas/
 
-obj-$(CONFIG_TTY_LOG) += tty_log.o
-user-objs-$(CONFIG_TTY_LOG) += tty_log.o
-
 USER_OBJS := $(user-objs-y) aio.o elf_aux.o execvp.o file.o helper.o irq.o \
 	main.o mem.o process.o registers.o sigio.o signal.o start_up.o time.o \
 	tty.o tls.o uaccess.o umid.o util.o
diff --git a/arch/um/os-Linux/include/file.h b/arch/um/os-Linux/include/file.h
deleted file mode 100644
index fe71be2..0000000
--- a/arch/um/os-Linux/include/file.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* 
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __OS_FILE_H__
-#define __OS_FILE_H__
-
-#define DEV_NULL "/dev/null"
-
-#endif
diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c
index 484e68f..d261f17 100644
--- a/arch/um/os-Linux/skas/mem.c
+++ b/arch/um/os-Linux/skas/mem.c
@@ -20,7 +20,6 @@
 #include "user.h"
 #include "sysdep/ptrace.h"
 #include "sysdep/stub.h"
-#include "uml-config.h"
 
 extern unsigned long batch_syscall_stub, __syscall_stub_start;
 
diff --git a/arch/um/os-Linux/tty_log.c b/arch/um/os-Linux/tty_log.c
deleted file mode 100644
index cc648e6..0000000
--- a/arch/um/os-Linux/tty_log.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) and
- * geoffrey hing <ghing@net.ohio-state.edu>
- * Licensed under the GPL
- */
-
-#include <errno.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/time.h>
-#include "init.h"
-#include "user.h"
-#include "os.h"
-
-#define TTY_LOG_DIR "./"
-
-/* Set early in boot and then unchanged */
-static char *tty_log_dir = TTY_LOG_DIR;
-static int tty_log_fd = -1;
-
-#define TTY_LOG_OPEN 1
-#define TTY_LOG_CLOSE 2
-#define TTY_LOG_WRITE 3
-#define TTY_LOG_EXEC 4
-
-#define TTY_READ 1
-#define TTY_WRITE 2
-
-struct tty_log_buf {
-	int what;
-	unsigned long tty;
-	int len;
-	int direction;
-	unsigned long sec;
-	unsigned long usec;
-};
-
-int open_tty_log(void *tty, void *current_tty)
-{
-	struct timeval tv;
-	struct tty_log_buf data;
-	char buf[strlen(tty_log_dir) + sizeof("01234567890-01234567\0")];
-	int fd;
-
-	gettimeofday(&tv, NULL);
-	if(tty_log_fd != -1){
-		data = ((struct tty_log_buf) { .what 	= TTY_LOG_OPEN,
-					       .tty  = (unsigned long) tty,
-					       .len  = sizeof(current_tty),
-					       .direction = 0,
-					       .sec = tv.tv_sec,
-					       .usec = tv.tv_usec } );
-		write(tty_log_fd, &data, sizeof(data));
-		write(tty_log_fd, &current_tty, data.len);
-		return tty_log_fd;
-	}
-
-	sprintf(buf, "%s/%0u-%0u", tty_log_dir, (unsigned int) tv.tv_sec,
- 		(unsigned int) tv.tv_usec);
-
-	fd = os_open_file(buf, of_append(of_create(of_rdwr(OPENFLAGS()))),
-			  0644);
-	if(fd < 0){
-		printk("open_tty_log : couldn't open '%s', errno = %d\n",
-		       buf, -fd);
-	}
-	return fd;
-}
-
-void close_tty_log(int fd, void *tty)
-{
-	struct tty_log_buf data;
-	struct timeval tv;
-
-	if(tty_log_fd != -1){
-		gettimeofday(&tv, NULL);
-		data = ((struct tty_log_buf) { .what 	= TTY_LOG_CLOSE,
-					       .tty  = (unsigned long) tty,
-					       .len  = 0,
-					       .direction = 0,
-					       .sec = tv.tv_sec,
-					       .usec = tv.tv_usec } );
-		write(tty_log_fd, &data, sizeof(data));
-		return;
-	}
-	os_close_file(fd);
-}
-
-static int log_chunk(int fd, const char *buf, int len)
-{
-	int total = 0, try, missed, n;
-	char chunk[64];
-
-	while(len > 0){
-		try = (len > sizeof(chunk)) ? sizeof(chunk) : len;
-		missed = copy_from_user_proc(chunk, (char *) buf, try);
-		try -= missed;
-		n = write(fd, chunk, try);
-		if(n != try) {
-			if(n < 0)
-				return -errno;
-			return -EIO;
-		}
-		if(missed != 0)
-			return -EFAULT;
-
-		len -= try;
-		total += try;
-		buf += try;
-	}
-
-	return total;
-}
-
-int write_tty_log(int fd, const char *buf, int len, void *tty, int is_read)
-{
-	struct timeval tv;
-	struct tty_log_buf data;
-	int direction;
-
-	if(fd == tty_log_fd){
-		gettimeofday(&tv, NULL);
-		direction = is_read ? TTY_READ : TTY_WRITE;
-		data = ((struct tty_log_buf) { .what 	= TTY_LOG_WRITE,
-					       .tty  = (unsigned long) tty,
-					       .len  = len,
-					       .direction = direction,
-					       .sec = tv.tv_sec,
-					       .usec = tv.tv_usec } );
-		write(tty_log_fd, &data, sizeof(data));
-	}
-
-	return log_chunk(fd, buf, len);
-}
-
-void log_exec(char **argv, void *tty)
-{
-	struct timeval tv;
-	struct tty_log_buf data;
-	char **ptr,*arg;
-	int len;
-
-	if(tty_log_fd == -1) return;
-
-	gettimeofday(&tv, NULL);
-
-	len = 0;
-	for(ptr = argv; ; ptr++){
-		if(copy_from_user_proc(&arg, ptr, sizeof(arg)))
-			return;
-		if(arg == NULL) break;
-		len += strlen_user_proc(arg);
-	}
-
-	data = ((struct tty_log_buf) { .what 	= TTY_LOG_EXEC,
-				       .tty  = (unsigned long) tty,
-				       .len  = len,
-				       .direction = 0,
-				       .sec = tv.tv_sec,
-				       .usec = tv.tv_usec } );
-	write(tty_log_fd, &data, sizeof(data));
-
-	for(ptr = argv; ; ptr++){
-		if(copy_from_user_proc(&arg, ptr, sizeof(arg)))
-			return;
-		if(arg == NULL) break;
-		log_chunk(tty_log_fd, arg, strlen_user_proc(arg));
-	}
-}
-
-extern void register_tty_logger(int (*opener)(void *, void *),
-				int (*writer)(int, const char *, int,
-					      void *, int),
-				void (*closer)(int, void *));
-
-static int register_logger(void)
-{
-	register_tty_logger(open_tty_log, write_tty_log, close_tty_log);
-	return 0;
-}
-
-__uml_initcall(register_logger);
-
-static int __init set_tty_log_dir(char *name, int *add)
-{
-	tty_log_dir = name;
-	return 0;
-}
-
-__uml_setup("tty_log_dir=", set_tty_log_dir,
-"tty_log_dir=<directory>\n"
-"    This is used to specify the directory where the logs of all pty\n"
-"    data from this UML machine will be written.\n\n"
-);
-
-static int __init set_tty_log_fd(char *name, int *add)
-{
-	char *end;
-
-	tty_log_fd = strtoul(name, &end, 0);
-	if((*end != '\0') || (end == name)){
-		printf("set_tty_log_fd - strtoul failed on '%s'\n", name);
-		tty_log_fd = -1;
-	}
-
-	*add = 0;
-	return 0;
-}
-
-__uml_setup("tty_log_fd=", set_tty_log_fd,
-"tty_log_fd=<fd>\n"
-"    This is used to specify a preconfigured file descriptor to which all\n"
-"    tty data will be written.  Preconfigure the descriptor with something\n"
-"    like '10>tty_log tty_log_fd=10'.\n\n"
-);
diff --git a/arch/um/sys-i386/asm/archparam.h b/arch/um/sys-i386/asm/archparam.h
new file mode 100644
index 0000000..93fd723
--- /dev/null
+++ b/arch/um/sys-i386/asm/archparam.h
@@ -0,0 +1,26 @@
+/* 
+ * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_ARCHPARAM_I386_H
+#define __UM_ARCHPARAM_I386_H
+
+#ifdef CONFIG_X86_PAE
+#define LAST_PKMAP 512
+#else
+#define LAST_PKMAP 1024
+#endif
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/sys-i386/asm/elf.h b/arch/um/sys-i386/asm/elf.h
new file mode 100644
index 0000000..d0da9d7
--- /dev/null
+++ b/arch/um/sys-i386/asm/elf.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+#ifndef __UM_ELF_I386_H
+#define __UM_ELF_I386_H
+
+#include <asm/user.h>
+#include "skas.h"
+
+#define R_386_NONE	0
+#define R_386_32	1
+#define R_386_PC32	2
+#define R_386_GOT32	3
+#define R_386_PLT32	4
+#define R_386_COPY	5
+#define R_386_GLOB_DAT	6
+#define R_386_JMP_SLOT	7
+#define R_386_RELATIVE	8
+#define R_386_GOTOFF	9
+#define R_386_GOTPC	10
+#define R_386_NUM	11
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_i387_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+	(((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
+
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA        ELFDATA2LSB
+#define ELF_ARCH        EM_386
+
+#define ELF_PLAT_INIT(regs, load_addr) do { \
+	PT_REGS_EBX(regs) = 0; \
+	PT_REGS_ECX(regs) = 0; \
+	PT_REGS_EDX(regs) = 0; \
+	PT_REGS_ESI(regs) = 0; \
+	PT_REGS_EDI(regs) = 0; \
+	PT_REGS_EBP(regs) = 0; \
+	PT_REGS_EAX(regs) = 0; \
+} while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
+
+/* Shamelessly stolen from include/asm-i386/elf.h */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) do {	\
+	pr_reg[0] = PT_REGS_EBX(regs);		\
+	pr_reg[1] = PT_REGS_ECX(regs);		\
+	pr_reg[2] = PT_REGS_EDX(regs);		\
+	pr_reg[3] = PT_REGS_ESI(regs);		\
+	pr_reg[4] = PT_REGS_EDI(regs);		\
+	pr_reg[5] = PT_REGS_EBP(regs);		\
+	pr_reg[6] = PT_REGS_EAX(regs);		\
+	pr_reg[7] = PT_REGS_DS(regs);		\
+	pr_reg[8] = PT_REGS_ES(regs);		\
+	/* fake once used fs and gs selectors? */	\
+	pr_reg[9] = PT_REGS_DS(regs);		\
+	pr_reg[10] = PT_REGS_DS(regs);		\
+	pr_reg[11] = PT_REGS_SYSCALL_NR(regs);	\
+	pr_reg[12] = PT_REGS_IP(regs);		\
+	pr_reg[13] = PT_REGS_CS(regs);		\
+	pr_reg[14] = PT_REGS_EFLAGS(regs);	\
+	pr_reg[15] = PT_REGS_SP(regs);		\
+	pr_reg[16] = PT_REGS_SS(regs);		\
+} while (0);
+
+extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu);
+
+#define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu)
+
+extern long elf_aux_hwcap;
+#define ELF_HWCAP (elf_aux_hwcap)
+
+extern char * elf_aux_platform;
+#define ELF_PLATFORM (elf_aux_platform)
+
+#define SET_PERSONALITY(ex) do { } while (0)
+
+extern unsigned long vsyscall_ehdr;
+extern unsigned long vsyscall_end;
+extern unsigned long __kernel_vsyscall;
+
+#define VSYSCALL_BASE vsyscall_ehdr
+#define VSYSCALL_END vsyscall_end
+
+/*
+ * This is the range that is readable by user mode, and things
+ * acting like user mode such as get_user_pages.
+ */
+#define FIXADDR_USER_START      VSYSCALL_BASE
+#define FIXADDR_USER_END        VSYSCALL_END
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them, start the x86-specific ones at 32.
+ */
+#define AT_SYSINFO		32
+#define AT_SYSINFO_EHDR		33
+
+#define ARCH_DLINFO						\
+do {								\
+	if ( vsyscall_ehdr ) {					\
+		NEW_AUX_ENT(AT_SYSINFO,	__kernel_vsyscall);	\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, vsyscall_ehdr);	\
+	}							\
+} while (0)
+
+/*
+ * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
+ * extra segments containing the vsyscall DSO contents.  Dumping its
+ * contents makes post-mortem fully interpretable later without matching up
+ * the same kernel and hardware config to see what PC values meant.
+ * Dumping its extra ELF program headers includes all the other information
+ * a debugger needs to easily find how the vsyscall DSO was being used.
+ */
+#define ELF_CORE_EXTRA_PHDRS						      \
+	(vsyscall_ehdr ? (((struct elfhdr *)vsyscall_ehdr)->e_phnum) : 0 )
+
+#define ELF_CORE_WRITE_EXTRA_PHDRS					      \
+if ( vsyscall_ehdr ) {							      \
+	const struct elfhdr *const ehdrp = (struct elfhdr *)vsyscall_ehdr;    \
+	const struct elf_phdr *const phdrp =				      \
+		(const struct elf_phdr *) (vsyscall_ehdr + ehdrp->e_phoff);   \
+	int i;								      \
+	Elf32_Off ofs = 0;						      \
+	for (i = 0; i < ehdrp->e_phnum; ++i) {				      \
+		struct elf_phdr phdr = phdrp[i];			      \
+		if (phdr.p_type == PT_LOAD) {				      \
+			ofs = phdr.p_offset = offset;			      \
+			offset += phdr.p_filesz;			      \
+		}							      \
+		else							      \
+			phdr.p_offset += ofs;				      \
+		phdr.p_paddr = 0; /* match other core phdrs */		      \
+		DUMP_WRITE(&phdr, sizeof(phdr));			      \
+	}								      \
+}
+#define ELF_CORE_WRITE_EXTRA_DATA					      \
+if ( vsyscall_ehdr ) {							      \
+	const struct elfhdr *const ehdrp = (struct elfhdr *)vsyscall_ehdr;    \
+	const struct elf_phdr *const phdrp =				      \
+		(const struct elf_phdr *) (vsyscall_ehdr + ehdrp->e_phoff);   \
+	int i;								      \
+	for (i = 0; i < ehdrp->e_phnum; ++i) {				      \
+		if (phdrp[i].p_type == PT_LOAD)				      \
+			DUMP_WRITE((void *) phdrp[i].p_vaddr,		      \
+				   phdrp[i].p_filesz);			      \
+	}								      \
+}
+
+#endif
diff --git a/arch/um/sys-i386/asm/module.h b/arch/um/sys-i386/asm/module.h
new file mode 100644
index 0000000..5ead4a0
--- /dev/null
+++ b/arch/um/sys-i386/asm/module.h
@@ -0,0 +1,13 @@
+#ifndef __UM_MODULE_I386_H
+#define __UM_MODULE_I386_H
+
+/* UML is simple */
+struct mod_arch_specific
+{
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#endif
diff --git a/arch/um/sys-i386/asm/processor.h b/arch/um/sys-i386/asm/processor.h
new file mode 100644
index 0000000..82a9061
--- /dev/null
+++ b/arch/um/sys-i386/asm/processor.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PROCESSOR_I386_H
+#define __UM_PROCESSOR_I386_H
+
+#include "linux/string.h"
+#include <sysdep/host_ldt.h>
+#include "asm/segment.h"
+
+extern int host_has_cmov;
+
+/* include faultinfo structure */
+#include "sysdep/faultinfo.h"
+
+struct uml_tls_struct {
+	struct user_desc tls;
+	unsigned flushed:1;
+	unsigned present:1;
+};
+
+struct arch_thread {
+	struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
+	unsigned long debugregs[8];
+	int debugregs_seq;
+	struct faultinfo faultinfo;
+};
+
+#define INIT_ARCH_THREAD { \
+	.tls_array  		= { [ 0 ... GDT_ENTRY_TLS_ENTRIES - 1 ] = \
+				    { .present = 0, .flushed = 0 } }, \
+	.debugregs  		= { [ 0 ... 7 ] = 0 }, \
+	.debugregs_seq		= 0, \
+	.faultinfo		= { 0, 0, 0 } \
+}
+
+static inline void arch_flush_thread(struct arch_thread *thread)
+{
+	/* Clear any TLS still hanging */
+	memset(&thread->tls_array, 0, sizeof(thread->tls_array));
+}
+
+static inline void arch_copy_thread(struct arch_thread *from,
+                                    struct arch_thread *to)
+{
+        memcpy(&to->tls_array, &from->tls_array, sizeof(from->tls_array));
+}
+
+#include <asm/user.h>
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+static inline void rep_nop(void)
+{
+	__asm__ __volatile__("rep;nop": : :"memory");
+}
+
+#define cpu_relax()	rep_nop()
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter"). Stolen
+ * from asm-i386/processor.h
+ */
+#define current_text_addr() \
+	({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; })
+
+#define ARCH_IS_STACKGROW(address) \
+       (address + 32 >= UPT_SP(&current->thread.regs.regs))
+
+#define KSTK_EIP(tsk) KSTK_REG(tsk, EIP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, UESP)
+#define KSTK_EBP(tsk) KSTK_REG(tsk, EBP)
+
+#include "asm/processor-generic.h"
+
+#endif
diff --git a/arch/um/sys-i386/asm/ptrace.h b/arch/um/sys-i386/asm/ptrace.h
new file mode 100644
index 0000000..0273e4d
--- /dev/null
+++ b/arch/um/sys-i386/asm/ptrace.h
@@ -0,0 +1,56 @@
+/* 
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PTRACE_I386_H
+#define __UM_PTRACE_I386_H
+
+#define HOST_AUDIT_ARCH AUDIT_ARCH_I386
+
+#include "linux/compiler.h"
+#include "asm/ptrace-generic.h"
+
+#define PT_REGS_EAX(r) UPT_EAX(&(r)->regs)
+#define PT_REGS_EBX(r) UPT_EBX(&(r)->regs)
+#define PT_REGS_ECX(r) UPT_ECX(&(r)->regs)
+#define PT_REGS_EDX(r) UPT_EDX(&(r)->regs)
+#define PT_REGS_ESI(r) UPT_ESI(&(r)->regs)
+#define PT_REGS_EDI(r) UPT_EDI(&(r)->regs)
+#define PT_REGS_EBP(r) UPT_EBP(&(r)->regs)
+
+#define PT_REGS_CS(r) UPT_CS(&(r)->regs)
+#define PT_REGS_SS(r) UPT_SS(&(r)->regs)
+#define PT_REGS_DS(r) UPT_DS(&(r)->regs)
+#define PT_REGS_ES(r) UPT_ES(&(r)->regs)
+#define PT_REGS_FS(r) UPT_FS(&(r)->regs)
+#define PT_REGS_GS(r) UPT_GS(&(r)->regs)
+
+#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
+
+#define PT_REGS_ORIG_SYSCALL(r) PT_REGS_EAX(r)
+#define PT_REGS_SYSCALL_RET(r) PT_REGS_EAX(r)
+#define PT_FIX_EXEC_STACK(sp) do ; while(0)
+
+#define profile_pc(regs) PT_REGS_IP(regs)
+
+#define user_mode(r) UPT_IS_USER(&(r)->regs)
+
+/*
+ * Forward declaration to avoid including sysdep/tls.h, which causes a
+ * circular include, and compilation failures.
+ */
+struct user_desc;
+
+extern int get_fpxregs(struct user_fxsr_struct __user *buf,
+		       struct task_struct *child);
+extern int set_fpxregs(struct user_fxsr_struct __user *buf,
+		       struct task_struct *tsk);
+
+extern int ptrace_get_thread_area(struct task_struct *child, int idx,
+                                  struct user_desc __user *user_desc);
+
+extern int ptrace_set_thread_area(struct task_struct *child, int idx,
+                                  struct user_desc __user *user_desc);
+
+#endif
diff --git a/arch/um/include/sysdep-i386/archsetjmp.h b/arch/um/sys-i386/shared/sysdep/archsetjmp.h
index 0f31208..0f31208 100644
--- a/arch/um/include/sysdep-i386/archsetjmp.h
+++ b/arch/um/sys-i386/shared/sysdep/archsetjmp.h
diff --git a/arch/um/include/sysdep-i386/barrier.h b/arch/um/sys-i386/shared/sysdep/barrier.h
index b58d52c..b58d52c 100644
--- a/arch/um/include/sysdep-i386/barrier.h
+++ b/arch/um/sys-i386/shared/sysdep/barrier.h
diff --git a/arch/um/include/sysdep-i386/checksum.h b/arch/um/sys-i386/shared/sysdep/checksum.h
index 0cb4645..0cb4645 100644
--- a/arch/um/include/sysdep-i386/checksum.h
+++ b/arch/um/sys-i386/shared/sysdep/checksum.h
diff --git a/arch/um/include/sysdep-i386/faultinfo.h b/arch/um/sys-i386/shared/sysdep/faultinfo.h
index db437cc..db437cc 100644
--- a/arch/um/include/sysdep-i386/faultinfo.h
+++ b/arch/um/sys-i386/shared/sysdep/faultinfo.h
diff --git a/arch/um/sys-i386/shared/sysdep/host_ldt.h b/arch/um/sys-i386/shared/sysdep/host_ldt.h
new file mode 100644
index 0000000..0953cc4
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/host_ldt.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_HOST_LDT_I386_H
+#define __ASM_HOST_LDT_I386_H
+
+#include <asm/ldt.h>
+
+/*
+ * macros stolen from include/asm-i386/desc.h
+ */
+#define LDT_entry_a(info) \
+	((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+#define LDT_entry_b(info) \
+	(((info)->base_addr & 0xff000000) | \
+	(((info)->base_addr & 0x00ff0000) >> 16) | \
+	((info)->limit & 0xf0000) | \
+	(((info)->read_exec_only ^ 1) << 9) | \
+	((info)->contents << 10) | \
+	(((info)->seg_not_present ^ 1) << 15) | \
+	((info)->seg_32bit << 22) | \
+	((info)->limit_in_pages << 23) | \
+	((info)->useable << 20) | \
+	0x7000)
+
+#define LDT_empty(info) (\
+	(info)->base_addr	== 0	&& \
+	(info)->limit		== 0	&& \
+	(info)->contents	== 0	&& \
+	(info)->read_exec_only	== 1	&& \
+	(info)->seg_32bit	== 0	&& \
+	(info)->limit_in_pages	== 0	&& \
+	(info)->seg_not_present	== 1	&& \
+	(info)->useable		== 0	)
+
+#endif
diff --git a/arch/um/include/sysdep-i386/kernel-offsets.h b/arch/um/sys-i386/shared/sysdep/kernel-offsets.h
index 5868526..5868526 100644
--- a/arch/um/include/sysdep-i386/kernel-offsets.h
+++ b/arch/um/sys-i386/shared/sysdep/kernel-offsets.h
diff --git a/arch/um/sys-i386/shared/sysdep/ptrace.h b/arch/um/sys-i386/shared/sysdep/ptrace.h
new file mode 100644
index 0000000..d50e62e
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/ptrace.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_I386_PTRACE_H
+#define __SYSDEP_I386_PTRACE_H
+
+#include "user_constants.h"
+#include "sysdep/faultinfo.h"
+
+#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
+#define MAX_REG_OFFSET (UM_FRAME_SIZE)
+
+static inline void update_debugregs(int seq) {}
+
+/* syscall emulation path in ptrace */
+
+#ifndef PTRACE_SYSEMU
+#define PTRACE_SYSEMU 31
+#endif
+
+void set_using_sysemu(int value);
+int get_using_sysemu(void);
+extern int sysemu_supported;
+
+#include "skas_ptregs.h"
+
+#define REGS_IP(r) ((r)[HOST_IP])
+#define REGS_SP(r) ((r)[HOST_SP])
+#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
+#define REGS_EAX(r) ((r)[HOST_EAX])
+#define REGS_EBX(r) ((r)[HOST_EBX])
+#define REGS_ECX(r) ((r)[HOST_ECX])
+#define REGS_EDX(r) ((r)[HOST_EDX])
+#define REGS_ESI(r) ((r)[HOST_ESI])
+#define REGS_EDI(r) ((r)[HOST_EDI])
+#define REGS_EBP(r) ((r)[HOST_EBP])
+#define REGS_CS(r) ((r)[HOST_CS])
+#define REGS_SS(r) ((r)[HOST_SS])
+#define REGS_DS(r) ((r)[HOST_DS])
+#define REGS_ES(r) ((r)[HOST_ES])
+#define REGS_FS(r) ((r)[HOST_FS])
+#define REGS_GS(r) ((r)[HOST_GS])
+
+#define REGS_SET_SYSCALL_RETURN(r, res) REGS_EAX(r) = (res)
+
+#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
+
+#ifndef PTRACE_SYSEMU_SINGLESTEP
+#define PTRACE_SYSEMU_SINGLESTEP 32
+#endif
+
+struct uml_pt_regs {
+	unsigned long gp[MAX_REG_NR];
+	struct faultinfo faultinfo;
+	long syscall;
+	int is_user;
+};
+
+#define EMPTY_UML_PT_REGS { }
+
+#define UPT_IP(r) REGS_IP((r)->gp)
+#define UPT_SP(r) REGS_SP((r)->gp)
+#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
+#define UPT_EAX(r) REGS_EAX((r)->gp)
+#define UPT_EBX(r) REGS_EBX((r)->gp)
+#define UPT_ECX(r) REGS_ECX((r)->gp)
+#define UPT_EDX(r) REGS_EDX((r)->gp)
+#define UPT_ESI(r) REGS_ESI((r)->gp)
+#define UPT_EDI(r) REGS_EDI((r)->gp)
+#define UPT_EBP(r) REGS_EBP((r)->gp)
+#define UPT_ORIG_EAX(r) ((r)->syscall)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_SS(r) REGS_SS((r)->gp)
+#define UPT_DS(r) REGS_DS((r)->gp)
+#define UPT_ES(r) REGS_ES((r)->gp)
+#define UPT_FS(r) REGS_FS((r)->gp)
+#define UPT_GS(r) REGS_GS((r)->gp)
+
+#define UPT_SYSCALL_ARG1(r) UPT_EBX(r)
+#define UPT_SYSCALL_ARG2(r) UPT_ECX(r)
+#define UPT_SYSCALL_ARG3(r) UPT_EDX(r)
+#define UPT_SYSCALL_ARG4(r) UPT_ESI(r)
+#define UPT_SYSCALL_ARG5(r) UPT_EDI(r)
+#define UPT_SYSCALL_ARG6(r) UPT_EBP(r)
+
+extern int user_context(unsigned long sp);
+
+#define UPT_IS_USER(r) ((r)->is_user)
+
+struct syscall_args {
+	unsigned long args[6];
+};
+
+#define SYSCALL_ARGS(r) ((struct syscall_args) \
+			 { .args = { UPT_SYSCALL_ARG1(r),	\
+				     UPT_SYSCALL_ARG2(r),	\
+				     UPT_SYSCALL_ARG3(r),	\
+				     UPT_SYSCALL_ARG4(r),	\
+				     UPT_SYSCALL_ARG5(r),	\
+				     UPT_SYSCALL_ARG6(r) } } )
+
+#define UPT_REG(regs, reg) \
+	({	unsigned long val; \
+		switch(reg){ \
+		case EIP: val = UPT_IP(regs); break; \
+		case UESP: val = UPT_SP(regs); break; \
+		case EAX: val = UPT_EAX(regs); break; \
+		case EBX: val = UPT_EBX(regs); break; \
+		case ECX: val = UPT_ECX(regs); break; \
+		case EDX: val = UPT_EDX(regs); break; \
+		case ESI: val = UPT_ESI(regs); break; \
+		case EDI: val = UPT_EDI(regs); break; \
+		case EBP: val = UPT_EBP(regs); break; \
+		case ORIG_EAX: val = UPT_ORIG_EAX(regs); break; \
+		case CS: val = UPT_CS(regs); break; \
+		case SS: val = UPT_SS(regs); break; \
+		case DS: val = UPT_DS(regs); break; \
+		case ES: val = UPT_ES(regs); break; \
+		case FS: val = UPT_FS(regs); break; \
+		case GS: val = UPT_GS(regs); break; \
+		case EFL: val = UPT_EFLAGS(regs); break; \
+		default :  \
+			panic("Bad register in UPT_REG : %d\n", reg);  \
+			val = -1; \
+		} \
+	        val; \
+	})
+
+#define UPT_SET(regs, reg, val) \
+	do { \
+		switch(reg){ \
+		case EIP: UPT_IP(regs) = val; break; \
+		case UESP: UPT_SP(regs) = val; break; \
+		case EAX: UPT_EAX(regs) = val; break; \
+		case EBX: UPT_EBX(regs) = val; break; \
+		case ECX: UPT_ECX(regs) = val; break; \
+		case EDX: UPT_EDX(regs) = val; break; \
+		case ESI: UPT_ESI(regs) = val; break; \
+		case EDI: UPT_EDI(regs) = val; break; \
+		case EBP: UPT_EBP(regs) = val; break; \
+		case ORIG_EAX: UPT_ORIG_EAX(regs) = val; break; \
+		case CS: UPT_CS(regs) = val; break; \
+		case SS: UPT_SS(regs) = val; break; \
+		case DS: UPT_DS(regs) = val; break; \
+		case ES: UPT_ES(regs) = val; break; \
+		case FS: UPT_FS(regs) = val; break; \
+		case GS: UPT_GS(regs) = val; break; \
+		case EFL: UPT_EFLAGS(regs) = val; break; \
+		default :  \
+			panic("Bad register in UPT_SET : %d\n", reg);  \
+			break; \
+		} \
+	} while (0)
+
+#define UPT_SET_SYSCALL_RETURN(r, res) \
+	REGS_SET_SYSCALL_RETURN((r)->regs, (res))
+
+#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
+
+#define UPT_ORIG_SYSCALL(r) UPT_EAX(r)
+#define UPT_SYSCALL_NR(r) UPT_ORIG_EAX(r)
+#define UPT_SYSCALL_RET(r) UPT_EAX(r)
+
+#define UPT_FAULTINFO(r) (&(r)->faultinfo)
+
+extern void arch_init_registers(int pid);
+
+#endif
diff --git a/arch/um/include/sysdep-i386/ptrace_user.h b/arch/um/sys-i386/shared/sysdep/ptrace_user.h
index ef56247..ef56247 100644
--- a/arch/um/include/sysdep-i386/ptrace_user.h
+++ b/arch/um/sys-i386/shared/sysdep/ptrace_user.h
diff --git a/arch/um/include/sysdep-i386/sc.h b/arch/um/sys-i386/shared/sysdep/sc.h
index c57d178..c57d178 100644
--- a/arch/um/include/sysdep-i386/sc.h
+++ b/arch/um/sys-i386/shared/sysdep/sc.h
diff --git a/arch/um/include/sysdep-i386/sigcontext.h b/arch/um/sys-i386/shared/sysdep/sigcontext.h
index f583c87..f583c87 100644
--- a/arch/um/include/sysdep-i386/sigcontext.h
+++ b/arch/um/sys-i386/shared/sysdep/sigcontext.h
diff --git a/arch/um/include/sysdep-i386/skas_ptrace.h b/arch/um/sys-i386/shared/sysdep/skas_ptrace.h
index e27b8a7..e27b8a7 100644
--- a/arch/um/include/sysdep-i386/skas_ptrace.h
+++ b/arch/um/sys-i386/shared/sysdep/skas_ptrace.h
diff --git a/arch/um/sys-i386/shared/sysdep/stub.h b/arch/um/sys-i386/shared/sysdep/stub.h
new file mode 100644
index 0000000..977dedd
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/stub.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_STUB_H
+#define __SYSDEP_STUB_H
+
+#include <sys/mman.h>
+#include <asm/ptrace.h>
+#include <asm/unistd.h>
+#include "as-layout.h"
+#include "stub-data.h"
+#include "kern_constants.h"
+
+extern void stub_segv_handler(int sig);
+extern void stub_clone_handler(void);
+
+#define STUB_SYSCALL_RET EAX
+#define STUB_MMAP_NR __NR_mmap2
+#define MMAP_OFFSET(o) ((o) >> UM_KERN_PAGE_SHIFT)
+
+static inline long stub_syscall0(long syscall)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall));
+
+	return ret;
+}
+
+static inline long stub_syscall1(long syscall, long arg1)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1));
+
+	return ret;
+}
+
+static inline long stub_syscall2(long syscall, long arg1, long arg2)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2));
+
+	return ret;
+}
+
+static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2), "d" (arg3));
+
+	return ret;
+}
+
+static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
+				 long arg4)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2), "d" (arg3), "S" (arg4));
+
+	return ret;
+}
+
+static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
+				 long arg4, long arg5)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5));
+
+	return ret;
+}
+
+static inline void trap_myself(void)
+{
+	__asm("int3");
+}
+
+static inline void remap_stack(int fd, unsigned long offset)
+{
+	__asm__ volatile ("movl %%eax,%%ebp ; movl %0,%%eax ; int $0x80 ;"
+			  "movl %7, %%ebx ; movl %%eax, (%%ebx)"
+			  : : "g" (STUB_MMAP_NR), "b" (STUB_DATA),
+			    "c" (UM_KERN_PAGE_SIZE),
+			    "d" (PROT_READ | PROT_WRITE),
+			    "S" (MAP_FIXED | MAP_SHARED), "D" (fd),
+			    "a" (offset),
+			    "i" (&((struct stub_data *) STUB_DATA)->err)
+			  : "memory");
+}
+
+#endif
diff --git a/arch/um/include/sysdep-i386/syscalls.h b/arch/um/sys-i386/shared/sysdep/syscalls.h
index 9056981..9056981 100644
--- a/arch/um/include/sysdep-i386/syscalls.h
+++ b/arch/um/sys-i386/shared/sysdep/syscalls.h
diff --git a/arch/um/sys-i386/shared/sysdep/system.h b/arch/um/sys-i386/shared/sysdep/system.h
new file mode 100644
index 0000000..d1b93c4
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/system.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_X86_SYSTEM_H_
+#define _ASM_X86_SYSTEM_H_
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/* entries in ARCH_DLINFO: */
+#ifdef CONFIG_IA32_EMULATION
+# define AT_VECTOR_SIZE_ARCH 2
+#else
+# define AT_VECTOR_SIZE_ARCH 1
+#endif
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+void default_idle(void);
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+/*
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define mb() 	asm volatile("mfence":::"memory")
+#define rmb()	asm volatile("lfence":::"memory")
+#define wmb()	asm volatile("sfence" ::: "memory")
+#endif
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+# define smp_rmb()	rmb()
+#else
+# define smp_rmb()	barrier()
+#endif
+#ifdef CONFIG_X86_OOSTORE
+# define smp_wmb() 	wmb()
+#else
+# define smp_wmb()	barrier()
+#endif
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif
diff --git a/arch/um/sys-i386/shared/sysdep/tls.h b/arch/um/sys-i386/shared/sysdep/tls.h
new file mode 100644
index 0000000..3455075
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/tls.h
@@ -0,0 +1,32 @@
+#ifndef _SYSDEP_TLS_H
+#define _SYSDEP_TLS_H
+
+# ifndef __KERNEL__
+
+/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
+ * may be named user_desc (but in 2.4 and in header matching its API was named
+ * modify_ldt_ldt_s). */
+
+typedef struct um_dup_user_desc {
+	unsigned int  entry_number;
+	unsigned int  base_addr;
+	unsigned int  limit;
+	unsigned int  seg_32bit:1;
+	unsigned int  contents:2;
+	unsigned int  read_exec_only:1;
+	unsigned int  limit_in_pages:1;
+	unsigned int  seg_not_present:1;
+	unsigned int  useable:1;
+} user_desc_t;
+
+# else /* __KERNEL__ */
+
+#  include <ldt.h>
+typedef struct user_desc user_desc_t;
+
+# endif /* __KERNEL__ */
+
+#define GDT_ENTRY_TLS_MIN_I386 6
+#define GDT_ENTRY_TLS_MIN_X86_64 12
+
+#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/sys-i386/shared/sysdep/vm-flags.h b/arch/um/sys-i386/shared/sysdep/vm-flags.h
new file mode 100644
index 0000000..e0d24c5
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/vm-flags.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __VM_FLAGS_I386_H
+#define __VM_FLAGS_I386_H
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(VM_READ | VM_WRITE | \
+	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif
diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c
index fd0c25a..1296473 100644
--- a/arch/um/sys-i386/signal.c
+++ b/arch/um/sys-i386/signal.c
@@ -179,7 +179,8 @@ static int copy_sc_from_user(struct pt_regs *regs,
 	if (have_fpx_regs) {
 		struct user_fxsr_struct fpx;
 
-		err = copy_from_user(&fpx, &sc.fpstate->_fxsr_env[0],
+		err = copy_from_user(&fpx,
+			&((struct _fpstate __user *)sc.fpstate)->_fxsr_env[0],
 				     sizeof(struct user_fxsr_struct));
 		if (err)
 			return 1;
diff --git a/arch/um/sys-i386/stub.S b/arch/um/sys-i386/stub.S
index 7699e89..c41b04b 100644
--- a/arch/um/sys-i386/stub.S
+++ b/arch/um/sys-i386/stub.S
@@ -1,4 +1,3 @@
-#include "uml-config.h"
 #include "as-layout.h"
 
 	.globl syscall_stub
diff --git a/arch/um/sys-i386/syscalls.c b/arch/um/sys-i386/syscalls.c
index e2d1426..857ca0b 100644
--- a/arch/um/sys-i386/syscalls.c
+++ b/arch/um/sys-i386/syscalls.c
@@ -6,6 +6,7 @@
 #include "linux/sched.h"
 #include "linux/shm.h"
 #include "linux/ipc.h"
+#include "linux/syscalls.h"
 #include "asm/mman.h"
 #include "asm/uaccess.h"
 #include "asm/unistd.h"
diff --git a/arch/um/include/sysdep-ia64/ptrace.h b/arch/um/sys-ia64/sysdep/ptrace.h
index 42dd8fb..42dd8fb 100644
--- a/arch/um/include/sysdep-ia64/ptrace.h
+++ b/arch/um/sys-ia64/sysdep/ptrace.h
diff --git a/arch/um/include/sysdep-ia64/sigcontext.h b/arch/um/sys-ia64/sysdep/sigcontext.h
index f15fb25..f15fb25 100644
--- a/arch/um/include/sysdep-ia64/sigcontext.h
+++ b/arch/um/sys-ia64/sysdep/sigcontext.h
diff --git a/arch/um/include/sysdep-ia64/skas_ptrace.h b/arch/um/sys-ia64/sysdep/skas_ptrace.h
index 25a38e7..25a38e7 100644
--- a/arch/um/include/sysdep-ia64/skas_ptrace.h
+++ b/arch/um/sys-ia64/sysdep/skas_ptrace.h
diff --git a/arch/um/include/sysdep-ia64/syscalls.h b/arch/um/sys-ia64/sysdep/syscalls.h
index 4a1f46e..4a1f46e 100644
--- a/arch/um/include/sysdep-ia64/syscalls.h
+++ b/arch/um/sys-ia64/sysdep/syscalls.h
diff --git a/arch/um/sys-ppc/asm/archparam.h b/arch/um/sys-ppc/asm/archparam.h
new file mode 100644
index 0000000..4269d8a
--- /dev/null
+++ b/arch/um/sys-ppc/asm/archparam.h
@@ -0,0 +1,8 @@
+#ifndef __UM_ARCHPARAM_PPC_H
+#define __UM_ARCHPARAM_PPC_H
+
+/********* Bits for asm-um/string.h **********/
+
+#define __HAVE_ARCH_STRRCHR
+
+#endif
diff --git a/arch/um/sys-ppc/asm/elf.h b/arch/um/sys-ppc/asm/elf.h
new file mode 100644
index 0000000..af9463c
--- /dev/null
+++ b/arch/um/sys-ppc/asm/elf.h
@@ -0,0 +1,53 @@
+#ifndef __UM_ELF_PPC_H
+#define __UM_ELF_PPC_H
+
+
+extern long elf_aux_hwcap;
+#define ELF_HWCAP (elf_aux_hwcap)
+
+#define SET_PERSONALITY(ex) do ; while(0)
+
+#define ELF_EXEC_PAGESIZE 4096
+
+#define elf_check_arch(x) (1)
+
+#ifdef CONFIG_64BIT
+#define ELF_CLASS ELFCLASS64
+#else
+#define ELF_CLASS ELFCLASS32
+#endif
+
+#define USE_ELF_CORE_DUMP
+
+#define R_386_NONE	0
+#define R_386_32	1
+#define R_386_PC32	2
+#define R_386_GOT32	3
+#define R_386_PLT32	4
+#define R_386_COPY	5
+#define R_386_GLOB_DAT	6
+#define R_386_JMP_SLOT	7
+#define R_386_RELATIVE	8
+#define R_386_GOTOFF	9
+#define R_386_GOTPC	10
+#define R_386_NUM	11
+
+#define ELF_PLATFORM (0)
+
+#define ELF_ET_DYN_BASE (0x08000000)
+
+/* the following stolen from asm-ppc/elf.h */
+#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
+#define ELF_NFPREG	33	/* includes fpscr */
+/* General registers */
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+#define ELF_DATA        ELFDATA2MSB
+#define ELF_ARCH	EM_PPC
+
+#endif
diff --git a/arch/um/sys-ppc/asm/processor.h b/arch/um/sys-ppc/asm/processor.h
new file mode 100644
index 0000000..9593231
--- /dev/null
+++ b/arch/um/sys-ppc/asm/processor.h
@@ -0,0 +1,15 @@
+#ifndef __UM_PROCESSOR_PPC_H
+#define __UM_PROCESSOR_PPC_H
+
+#if defined(__ASSEMBLY__)
+
+#define CONFIG_PPC_MULTIPLATFORM
+#include "arch/processor.h"
+
+#else
+
+#include "asm/processor-generic.h"
+
+#endif
+
+#endif
diff --git a/arch/um/include/sysdep-ppc/ptrace.h b/arch/um/sys-ppc/shared/sysdep/ptrace.h
index df2397d..df2397d 100644
--- a/arch/um/include/sysdep-ppc/ptrace.h
+++ b/arch/um/sys-ppc/shared/sysdep/ptrace.h
diff --git a/arch/um/include/sysdep-ppc/sigcontext.h b/arch/um/sys-ppc/shared/sysdep/sigcontext.h
index f20d965..f20d965 100644
--- a/arch/um/include/sysdep-ppc/sigcontext.h
+++ b/arch/um/sys-ppc/shared/sysdep/sigcontext.h
diff --git a/arch/um/include/sysdep-ppc/skas_ptrace.h b/arch/um/sys-ppc/shared/sysdep/skas_ptrace.h
index d9fbbac..d9fbbac 100644
--- a/arch/um/include/sysdep-ppc/skas_ptrace.h
+++ b/arch/um/sys-ppc/shared/sysdep/skas_ptrace.h
diff --git a/arch/um/include/sysdep-ppc/syscalls.h b/arch/um/sys-ppc/shared/sysdep/syscalls.h
index 679df35..679df35 100644
--- a/arch/um/include/sysdep-ppc/syscalls.h
+++ b/arch/um/sys-ppc/shared/sysdep/syscalls.h
diff --git a/arch/um/sys-x86_64/asm/archparam.h b/arch/um/sys-x86_64/asm/archparam.h
new file mode 100644
index 0000000..270ed95
--- /dev/null
+++ b/arch/um/sys-x86_64/asm/archparam.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_ARCHPARAM_X86_64_H
+#define __UM_ARCHPARAM_X86_64_H
+
+
+/* No user-accessible fixmap addresses, i.e. vsyscall */
+#define FIXADDR_USER_START	0
+#define FIXADDR_USER_END	0
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/sys-x86_64/asm/elf.h b/arch/um/sys-x86_64/asm/elf.h
new file mode 100644
index 0000000..6e8a919
--- /dev/null
+++ b/arch/um/sys-x86_64/asm/elf.h
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ *
+ * Licensed under the GPL
+ */
+#ifndef __UM_ELF_X86_64_H
+#define __UM_ELF_X86_64_H
+
+#include <asm/user.h>
+#include "skas.h"
+
+/* x86-64 relocation types, taken from asm-x86_64/elf.h */
+#define R_X86_64_NONE		0	/* No reloc */
+#define R_X86_64_64		1	/* Direct 64 bit  */
+#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
+#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
+#define R_X86_64_PLT32		4	/* 32 bit PLT address */
+#define R_X86_64_COPY		5	/* Copy symbol at runtime */
+#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
+#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
+#define R_X86_64_RELATIVE	8	/* Adjust by program base */
+#define R_X86_64_GOTPCREL	9	/* 32 bit signed pc relative
+					   offset to GOT */
+#define R_X86_64_32		10	/* Direct 32 bit zero extended */
+#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
+#define R_X86_64_16		12	/* Direct 16 bit zero extended */
+#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
+#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
+#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
+
+#define R_X86_64_NUM		16
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_i387_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+	((x)->e_machine == EM_X86_64)
+
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA        ELFDATA2LSB
+#define ELF_ARCH        EM_X86_64
+
+#define ELF_PLAT_INIT(regs, load_addr)    do { \
+	PT_REGS_RBX(regs) = 0; \
+	PT_REGS_RCX(regs) = 0; \
+	PT_REGS_RDX(regs) = 0; \
+	PT_REGS_RSI(regs) = 0; \
+	PT_REGS_RDI(regs) = 0; \
+	PT_REGS_RBP(regs) = 0; \
+	PT_REGS_RAX(regs) = 0; \
+	PT_REGS_R8(regs) = 0; \
+	PT_REGS_R9(regs) = 0; \
+	PT_REGS_R10(regs) = 0; \
+	PT_REGS_R11(regs) = 0; \
+	PT_REGS_R12(regs) = 0; \
+	PT_REGS_R13(regs) = 0; \
+	PT_REGS_R14(regs) = 0; \
+	PT_REGS_R15(regs) = 0; \
+} while (0)
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)		\
+	(pr_reg)[0] = (regs)->regs.gp[0];			\
+	(pr_reg)[1] = (regs)->regs.gp[1];			\
+	(pr_reg)[2] = (regs)->regs.gp[2];			\
+	(pr_reg)[3] = (regs)->regs.gp[3];			\
+	(pr_reg)[4] = (regs)->regs.gp[4];			\
+	(pr_reg)[5] = (regs)->regs.gp[5];			\
+	(pr_reg)[6] = (regs)->regs.gp[6];			\
+	(pr_reg)[7] = (regs)->regs.gp[7];			\
+	(pr_reg)[8] = (regs)->regs.gp[8];			\
+	(pr_reg)[9] = (regs)->regs.gp[9];			\
+	(pr_reg)[10] = (regs)->regs.gp[10];			\
+	(pr_reg)[11] = (regs)->regs.gp[11];			\
+	(pr_reg)[12] = (regs)->regs.gp[12];			\
+	(pr_reg)[13] = (regs)->regs.gp[13];			\
+	(pr_reg)[14] = (regs)->regs.gp[14];			\
+	(pr_reg)[15] = (regs)->regs.gp[15];			\
+	(pr_reg)[16] = (regs)->regs.gp[16];			\
+	(pr_reg)[17] = (regs)->regs.gp[17];			\
+	(pr_reg)[18] = (regs)->regs.gp[18];			\
+	(pr_reg)[19] = (regs)->regs.gp[19];			\
+	(pr_reg)[20] = (regs)->regs.gp[20];			\
+	(pr_reg)[21] = current->thread.arch.fs;			\
+	(pr_reg)[22] = 0;					\
+	(pr_reg)[23] = 0;					\
+	(pr_reg)[24] = 0;					\
+	(pr_reg)[25] = 0;					\
+	(pr_reg)[26] = 0;
+
+extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu);
+
+#define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu)
+
+#ifdef TIF_IA32 /* XXX */
+#error XXX, indeed
+        clear_thread_flag(TIF_IA32);
+#endif
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
+
+extern long elf_aux_hwcap;
+#define ELF_HWCAP (elf_aux_hwcap)
+
+#define ELF_PLATFORM "x86_64"
+
+#define SET_PERSONALITY(ex) do ; while(0)
+
+#endif
diff --git a/arch/um/sys-x86_64/asm/module.h b/arch/um/sys-x86_64/asm/module.h
new file mode 100644
index 0000000..35b5491
--- /dev/null
+++ b/arch/um/sys-x86_64/asm/module.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_MODULE_X86_64_H
+#define __UM_MODULE_X86_64_H
+
+/* UML is simple */
+struct mod_arch_specific
+{
+};
+
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/sys-x86_64/asm/processor.h b/arch/um/sys-x86_64/asm/processor.h
new file mode 100644
index 0000000..875a26a
--- /dev/null
+++ b/arch/um/sys-x86_64/asm/processor.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PROCESSOR_X86_64_H
+#define __UM_PROCESSOR_X86_64_H
+
+/* include faultinfo structure */
+#include "sysdep/faultinfo.h"
+
+struct arch_thread {
+        unsigned long debugregs[8];
+        int debugregs_seq;
+        unsigned long fs;
+        struct faultinfo faultinfo;
+};
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+static inline void rep_nop(void)
+{
+	__asm__ __volatile__("rep;nop": : :"memory");
+}
+
+#define cpu_relax()   rep_nop()
+
+#define INIT_ARCH_THREAD { .debugregs  		= { [ 0 ... 7 ] = 0 }, \
+			   .debugregs_seq	= 0, \
+			   .fs			= 0, \
+			   .faultinfo		= { 0, 0, 0 } }
+
+static inline void arch_flush_thread(struct arch_thread *thread)
+{
+}
+
+static inline void arch_copy_thread(struct arch_thread *from,
+                                    struct arch_thread *to)
+{
+	to->fs = from->fs;
+}
+
+#include <asm/user.h>
+
+#define current_text_addr() \
+	({ void *pc; __asm__("movq $1f,%0\n1:":"=g" (pc)); pc; })
+
+#define ARCH_IS_STACKGROW(address) \
+        (address + 128 >= UPT_SP(&current->thread.regs.regs))
+
+#define KSTK_EIP(tsk) KSTK_REG(tsk, RIP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, RSP)
+
+#include "asm/processor-generic.h"
+
+#endif
diff --git a/arch/um/sys-x86_64/asm/ptrace.h b/arch/um/sys-x86_64/asm/ptrace.h
new file mode 100644
index 0000000..83d8c47
--- /dev/null
+++ b/arch/um/sys-x86_64/asm/ptrace.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PTRACE_X86_64_H
+#define __UM_PTRACE_X86_64_H
+
+#include "linux/compiler.h"
+#include "asm/errno.h"
+
+#define __FRAME_OFFSETS /* Needed to get the R* macros */
+#include "asm/ptrace-generic.h"
+
+#define HOST_AUDIT_ARCH AUDIT_ARCH_X86_64
+
+#define PT_REGS_RBX(r) UPT_RBX(&(r)->regs)
+#define PT_REGS_RCX(r) UPT_RCX(&(r)->regs)
+#define PT_REGS_RDX(r) UPT_RDX(&(r)->regs)
+#define PT_REGS_RSI(r) UPT_RSI(&(r)->regs)
+#define PT_REGS_RDI(r) UPT_RDI(&(r)->regs)
+#define PT_REGS_RBP(r) UPT_RBP(&(r)->regs)
+#define PT_REGS_RAX(r) UPT_RAX(&(r)->regs)
+#define PT_REGS_R8(r) UPT_R8(&(r)->regs)
+#define PT_REGS_R9(r) UPT_R9(&(r)->regs)
+#define PT_REGS_R10(r) UPT_R10(&(r)->regs)
+#define PT_REGS_R11(r) UPT_R11(&(r)->regs)
+#define PT_REGS_R12(r) UPT_R12(&(r)->regs)
+#define PT_REGS_R13(r) UPT_R13(&(r)->regs)
+#define PT_REGS_R14(r) UPT_R14(&(r)->regs)
+#define PT_REGS_R15(r) UPT_R15(&(r)->regs)
+
+#define PT_REGS_FS(r) UPT_FS(&(r)->regs)
+#define PT_REGS_GS(r) UPT_GS(&(r)->regs)
+#define PT_REGS_DS(r) UPT_DS(&(r)->regs)
+#define PT_REGS_ES(r) UPT_ES(&(r)->regs)
+#define PT_REGS_SS(r) UPT_SS(&(r)->regs)
+#define PT_REGS_CS(r) UPT_CS(&(r)->regs)
+
+#define PT_REGS_ORIG_RAX(r) UPT_ORIG_RAX(&(r)->regs)
+#define PT_REGS_RIP(r) UPT_IP(&(r)->regs)
+#define PT_REGS_RSP(r) UPT_SP(&(r)->regs)
+
+#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
+
+/* XXX */
+#define user_mode(r) UPT_IS_USER(&(r)->regs)
+#define PT_REGS_ORIG_SYSCALL(r) PT_REGS_RAX(r)
+#define PT_REGS_SYSCALL_RET(r) PT_REGS_RAX(r)
+
+#define PT_FIX_EXEC_STACK(sp) do ; while(0)
+
+#define profile_pc(regs) PT_REGS_IP(regs)
+
+struct user_desc;
+
+static inline int ptrace_get_thread_area(struct task_struct *child, int idx,
+                                         struct user_desc __user *user_desc)
+{
+        return -ENOSYS;
+}
+
+static inline int ptrace_set_thread_area(struct task_struct *child, int idx,
+                                         struct user_desc __user *user_desc)
+{
+        return -ENOSYS;
+}
+
+extern long arch_prctl(struct task_struct *task, int code,
+		       unsigned long __user *addr);
+#endif
diff --git a/arch/um/include/sysdep-x86_64/archsetjmp.h b/arch/um/sys-x86_64/shared/sysdep/archsetjmp.h
index 2af8f12..2af8f12 100644
--- a/arch/um/include/sysdep-x86_64/archsetjmp.h
+++ b/arch/um/sys-x86_64/shared/sysdep/archsetjmp.h
diff --git a/arch/um/include/sysdep-x86_64/barrier.h b/arch/um/sys-x86_64/shared/sysdep/barrier.h
index 7b610be..7b610be 100644
--- a/arch/um/include/sysdep-x86_64/barrier.h
+++ b/arch/um/sys-x86_64/shared/sysdep/barrier.h
diff --git a/arch/um/include/sysdep-x86_64/checksum.h b/arch/um/sys-x86_64/shared/sysdep/checksum.h
index a5be903..a5be903 100644
--- a/arch/um/include/sysdep-x86_64/checksum.h
+++ b/arch/um/sys-x86_64/shared/sysdep/checksum.h
diff --git a/arch/um/include/sysdep-x86_64/faultinfo.h b/arch/um/sys-x86_64/shared/sysdep/faultinfo.h
index cb917b0..cb917b0 100644
--- a/arch/um/include/sysdep-x86_64/faultinfo.h
+++ b/arch/um/sys-x86_64/shared/sysdep/faultinfo.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/host_ldt.h b/arch/um/sys-x86_64/shared/sysdep/host_ldt.h
new file mode 100644
index 0000000..e8b1be1
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/host_ldt.h
@@ -0,0 +1,38 @@
+#ifndef __ASM_HOST_LDT_X86_64_H
+#define __ASM_HOST_LDT_X86_64_H
+
+#include <asm/ldt.h>
+
+/*
+ * macros stolen from include/asm-x86_64/desc.h
+ */
+#define LDT_entry_a(info) \
+	((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+/* Don't allow setting of the lm bit. It is useless anyways because
+ * 64bit system calls require __USER_CS. */
+#define LDT_entry_b(info) \
+	(((info)->base_addr & 0xff000000) | \
+	(((info)->base_addr & 0x00ff0000) >> 16) | \
+	((info)->limit & 0xf0000) | \
+	(((info)->read_exec_only ^ 1) << 9) | \
+	((info)->contents << 10) | \
+	(((info)->seg_not_present ^ 1) << 15) | \
+	((info)->seg_32bit << 22) | \
+	((info)->limit_in_pages << 23) | \
+	((info)->useable << 20) | \
+	/* ((info)->lm << 21) | */ \
+	0x7000)
+
+#define LDT_empty(info) (\
+	(info)->base_addr	== 0	&& \
+	(info)->limit		== 0	&& \
+	(info)->contents	== 0	&& \
+	(info)->read_exec_only	== 1	&& \
+	(info)->seg_32bit	== 0	&& \
+	(info)->limit_in_pages	== 0	&& \
+	(info)->seg_not_present	== 1	&& \
+	(info)->useable		== 0	&& \
+	(info)->lm              == 0)
+
+#endif
diff --git a/arch/um/include/sysdep-x86_64/kernel-offsets.h b/arch/um/sys-x86_64/shared/sysdep/kernel-offsets.h
index a307237..a307237 100644
--- a/arch/um/include/sysdep-x86_64/kernel-offsets.h
+++ b/arch/um/sys-x86_64/shared/sysdep/kernel-offsets.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace.h b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
new file mode 100644
index 0000000..fdba545
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
@@ -0,0 +1,239 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_X86_64_PTRACE_H
+#define __SYSDEP_X86_64_PTRACE_H
+
+#include "user_constants.h"
+#include "sysdep/faultinfo.h"
+
+#define MAX_REG_OFFSET (UM_FRAME_SIZE)
+#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
+
+#include "skas_ptregs.h"
+
+#define REGS_IP(r) ((r)[HOST_IP])
+#define REGS_SP(r) ((r)[HOST_SP])
+
+#define REGS_RBX(r) ((r)[HOST_RBX])
+#define REGS_RCX(r) ((r)[HOST_RCX])
+#define REGS_RDX(r) ((r)[HOST_RDX])
+#define REGS_RSI(r) ((r)[HOST_RSI])
+#define REGS_RDI(r) ((r)[HOST_RDI])
+#define REGS_RBP(r) ((r)[HOST_RBP])
+#define REGS_RAX(r) ((r)[HOST_RAX])
+#define REGS_R8(r) ((r)[HOST_R8])
+#define REGS_R9(r) ((r)[HOST_R9])
+#define REGS_R10(r) ((r)[HOST_R10])
+#define REGS_R11(r) ((r)[HOST_R11])
+#define REGS_R12(r) ((r)[HOST_R12])
+#define REGS_R13(r) ((r)[HOST_R13])
+#define REGS_R14(r) ((r)[HOST_R14])
+#define REGS_R15(r) ((r)[HOST_R15])
+#define REGS_CS(r) ((r)[HOST_CS])
+#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
+#define REGS_SS(r) ((r)[HOST_SS])
+
+#define HOST_FS_BASE 21
+#define HOST_GS_BASE 22
+#define HOST_DS 23
+#define HOST_ES 24
+#define HOST_FS 25
+#define HOST_GS 26
+
+/* Also defined in asm/ptrace-x86_64.h, but not in libc headers.  So, these
+ * are already defined for kernel code, but not for userspace code.
+ */
+#ifndef FS_BASE
+/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
+ * which is what x86_64 ptrace actually uses.
+ */
+#define FS_BASE (HOST_FS_BASE * sizeof(long))
+#define GS_BASE (HOST_GS_BASE * sizeof(long))
+#define DS (HOST_DS * sizeof(long))
+#define ES (HOST_ES * sizeof(long))
+#define FS (HOST_FS * sizeof(long))
+#define GS (HOST_GS * sizeof(long))
+#endif
+
+#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
+#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
+#define REGS_DS(r) ((r)[HOST_DS])
+#define REGS_ES(r) ((r)[HOST_ES])
+#define REGS_FS(r) ((r)[HOST_FS])
+#define REGS_GS(r) ((r)[HOST_GS])
+
+#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_RAX])
+
+#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
+
+#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
+
+#define REGS_SEGV_IS_FIXABLE(r) SEGV_IS_FIXABLE((r)->trap_type)
+
+#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
+
+#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
+
+#define REGS_TRAP(r) ((r)->trap_type)
+
+#define REGS_ERR(r) ((r)->fault_type)
+
+struct uml_pt_regs {
+	unsigned long gp[MAX_REG_NR];
+	struct faultinfo faultinfo;
+	long syscall;
+	int is_user;
+};
+
+#define EMPTY_UML_PT_REGS { }
+
+#define UPT_RBX(r) REGS_RBX((r)->gp)
+#define UPT_RCX(r) REGS_RCX((r)->gp)
+#define UPT_RDX(r) REGS_RDX((r)->gp)
+#define UPT_RSI(r) REGS_RSI((r)->gp)
+#define UPT_RDI(r) REGS_RDI((r)->gp)
+#define UPT_RBP(r) REGS_RBP((r)->gp)
+#define UPT_RAX(r) REGS_RAX((r)->gp)
+#define UPT_R8(r) REGS_R8((r)->gp)
+#define UPT_R9(r) REGS_R9((r)->gp)
+#define UPT_R10(r) REGS_R10((r)->gp)
+#define UPT_R11(r) REGS_R11((r)->gp)
+#define UPT_R12(r) REGS_R12((r)->gp)
+#define UPT_R13(r) REGS_R13((r)->gp)
+#define UPT_R14(r) REGS_R14((r)->gp)
+#define UPT_R15(r) REGS_R15((r)->gp)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_FS_BASE(r) REGS_FS_BASE((r)->gp)
+#define UPT_FS(r) REGS_FS((r)->gp)
+#define UPT_GS_BASE(r) REGS_GS_BASE((r)->gp)
+#define UPT_GS(r) REGS_GS((r)->gp)
+#define UPT_DS(r) REGS_DS((r)->gp)
+#define UPT_ES(r) REGS_ES((r)->gp)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_SS(r) REGS_SS((r)->gp)
+#define UPT_ORIG_RAX(r) REGS_ORIG_RAX((r)->gp)
+
+#define UPT_IP(r) REGS_IP((r)->gp)
+#define UPT_SP(r) REGS_SP((r)->gp)
+
+#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
+#define UPT_SYSCALL_NR(r) ((r)->syscall)
+#define UPT_SYSCALL_RET(r) UPT_RAX(r)
+
+extern int user_context(unsigned long sp);
+
+#define UPT_IS_USER(r) ((r)->is_user)
+
+#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
+#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
+#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
+#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
+#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
+#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
+
+struct syscall_args {
+	unsigned long args[6];
+};
+
+#define SYSCALL_ARGS(r) ((struct syscall_args) \
+			 { .args = { UPT_SYSCALL_ARG1(r),	 \
+				     UPT_SYSCALL_ARG2(r),	 \
+				     UPT_SYSCALL_ARG3(r),	 \
+				     UPT_SYSCALL_ARG4(r),	 \
+				     UPT_SYSCALL_ARG5(r),	 \
+				     UPT_SYSCALL_ARG6(r) } } )
+
+#define UPT_REG(regs, reg) \
+	({      unsigned long val;		\
+		switch(reg){						\
+		case R8: val = UPT_R8(regs); break;			\
+		case R9: val = UPT_R9(regs); break;			\
+		case R10: val = UPT_R10(regs); break;			\
+		case R11: val = UPT_R11(regs); break;			\
+		case R12: val = UPT_R12(regs); break;			\
+		case R13: val = UPT_R13(regs); break;			\
+		case R14: val = UPT_R14(regs); break;			\
+		case R15: val = UPT_R15(regs); break;			\
+		case RIP: val = UPT_IP(regs); break;			\
+		case RSP: val = UPT_SP(regs); break;			\
+		case RAX: val = UPT_RAX(regs); break;			\
+		case RBX: val = UPT_RBX(regs); break;			\
+		case RCX: val = UPT_RCX(regs); break;			\
+		case RDX: val = UPT_RDX(regs); break;			\
+		case RSI: val = UPT_RSI(regs); break;			\
+		case RDI: val = UPT_RDI(regs); break;			\
+		case RBP: val = UPT_RBP(regs); break;			\
+		case ORIG_RAX: val = UPT_ORIG_RAX(regs); break;		\
+		case CS: val = UPT_CS(regs); break;			\
+		case SS: val = UPT_SS(regs); break;			\
+		case FS_BASE: val = UPT_FS_BASE(regs); break;		\
+		case GS_BASE: val = UPT_GS_BASE(regs); break;		\
+		case DS: val = UPT_DS(regs); break;			\
+		case ES: val = UPT_ES(regs); break;			\
+		case FS : val = UPT_FS (regs); break;			\
+		case GS: val = UPT_GS(regs); break;			\
+		case EFLAGS: val = UPT_EFLAGS(regs); break;		\
+		default :						\
+			panic("Bad register in UPT_REG : %d\n", reg);	\
+			val = -1;					\
+		}							\
+		val;							\
+	})
+
+
+#define UPT_SET(regs, reg, val) \
+	({      unsigned long __upt_val = val;	\
+		switch(reg){						\
+		case R8: UPT_R8(regs) = __upt_val; break;		\
+		case R9: UPT_R9(regs) = __upt_val; break;		\
+		case R10: UPT_R10(regs) = __upt_val; break;		\
+		case R11: UPT_R11(regs) = __upt_val; break;		\
+		case R12: UPT_R12(regs) = __upt_val; break;		\
+		case R13: UPT_R13(regs) = __upt_val; break;		\
+		case R14: UPT_R14(regs) = __upt_val; break;		\
+		case R15: UPT_R15(regs) = __upt_val; break;		\
+		case RIP: UPT_IP(regs) = __upt_val; break;		\
+		case RSP: UPT_SP(regs) = __upt_val; break;		\
+		case RAX: UPT_RAX(regs) = __upt_val; break;		\
+		case RBX: UPT_RBX(regs) = __upt_val; break;		\
+		case RCX: UPT_RCX(regs) = __upt_val; break;		\
+		case RDX: UPT_RDX(regs) = __upt_val; break;		\
+		case RSI: UPT_RSI(regs) = __upt_val; break;		\
+		case RDI: UPT_RDI(regs) = __upt_val; break;		\
+		case RBP: UPT_RBP(regs) = __upt_val; break;		\
+		case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break;	\
+		case CS: UPT_CS(regs) = __upt_val; break;		\
+		case SS: UPT_SS(regs) = __upt_val; break;		\
+		case FS_BASE: UPT_FS_BASE(regs) = __upt_val; break;	\
+		case GS_BASE: UPT_GS_BASE(regs) = __upt_val; break;	\
+		case DS: UPT_DS(regs) = __upt_val; break;		\
+		case ES: UPT_ES(regs) = __upt_val; break;		\
+		case FS: UPT_FS(regs) = __upt_val; break;		\
+		case GS: UPT_GS(regs) = __upt_val; break;		\
+		case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break;	\
+		default :						\
+			panic("Bad register in UPT_SET : %d\n", reg);	\
+			break;						\
+		}							\
+		__upt_val;						\
+	})
+
+#define UPT_SET_SYSCALL_RETURN(r, res) \
+	REGS_SET_SYSCALL_RETURN((r)->regs, (res))
+
+#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
+
+#define UPT_SEGV_IS_FIXABLE(r) REGS_SEGV_IS_FIXABLE(&r->skas)
+
+#define UPT_FAULTINFO(r) (&(r)->faultinfo)
+
+static inline void arch_init_registers(int pid)
+{
+}
+
+#endif
diff --git a/arch/um/include/sysdep-x86_64/ptrace_user.h b/arch/um/sys-x86_64/shared/sysdep/ptrace_user.h
index 4dbccdb..4dbccdb 100644
--- a/arch/um/include/sysdep-x86_64/ptrace_user.h
+++ b/arch/um/sys-x86_64/shared/sysdep/ptrace_user.h
diff --git a/arch/um/include/sysdep-x86_64/sc.h b/arch/um/sys-x86_64/shared/sysdep/sc.h
index 8aee45b..8aee45b 100644
--- a/arch/um/include/sysdep-x86_64/sc.h
+++ b/arch/um/sys-x86_64/shared/sysdep/sc.h
diff --git a/arch/um/include/sysdep-x86_64/sigcontext.h b/arch/um/sys-x86_64/shared/sysdep/sigcontext.h
index 0155133..0155133 100644
--- a/arch/um/include/sysdep-x86_64/sigcontext.h
+++ b/arch/um/sys-x86_64/shared/sysdep/sigcontext.h
diff --git a/arch/um/include/sysdep-x86_64/skas_ptrace.h b/arch/um/sys-x86_64/shared/sysdep/skas_ptrace.h
index 95db4be7..95db4be7 100644
--- a/arch/um/include/sysdep-x86_64/skas_ptrace.h
+++ b/arch/um/sys-x86_64/shared/sysdep/skas_ptrace.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/stub.h b/arch/um/sys-x86_64/shared/sysdep/stub.h
new file mode 100644
index 0000000..3432aa2
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/stub.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_STUB_H
+#define __SYSDEP_STUB_H
+
+#include <sys/mman.h>
+#include <asm/unistd.h>
+#include <sysdep/ptrace_user.h>
+#include "as-layout.h"
+#include "stub-data.h"
+#include "kern_constants.h"
+
+extern void stub_segv_handler(int sig);
+extern void stub_clone_handler(void);
+
+#define STUB_SYSCALL_RET PT_INDEX(RAX)
+#define STUB_MMAP_NR __NR_mmap
+#define MMAP_OFFSET(o) (o)
+
+#define __syscall_clobber "r11","rcx","memory"
+#define __syscall "syscall"
+
+static inline long stub_syscall0(long syscall)
+{
+	long ret;
+
+	__asm__ volatile (__syscall
+		: "=a" (ret)
+		: "0" (syscall) : __syscall_clobber );
+
+	return ret;
+}
+
+static inline long stub_syscall2(long syscall, long arg1, long arg2)
+{
+	long ret;
+
+	__asm__ volatile (__syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber );
+
+	return ret;
+}
+
+static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
+{
+	long ret;
+
+	__asm__ volatile (__syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3)
+		: __syscall_clobber );
+
+	return ret;
+}
+
+static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
+				 long arg4)
+{
+	long ret;
+
+	__asm__ volatile ("movq %5,%%r10 ; " __syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
+		  "g" (arg4)
+		: __syscall_clobber, "r10" );
+
+	return ret;
+}
+
+static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
+				 long arg4, long arg5)
+{
+	long ret;
+
+	__asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
+		  "g" (arg4), "g" (arg5)
+		: __syscall_clobber, "r10", "r8" );
+
+	return ret;
+}
+
+static inline void trap_myself(void)
+{
+	__asm("int3");
+}
+
+static inline void remap_stack(long fd, unsigned long offset)
+{
+	__asm__ volatile ("movq %4,%%r10 ; movq %5,%%r8 ; "
+			  "movq %6, %%r9; " __syscall "; movq %7, %%rbx ; "
+			  "movq %%rax, (%%rbx)":
+			  : "a" (STUB_MMAP_NR), "D" (STUB_DATA),
+			    "S" (UM_KERN_PAGE_SIZE),
+			    "d" (PROT_READ | PROT_WRITE),
+                            "g" (MAP_FIXED | MAP_SHARED), "g" (fd),
+			    "g" (offset),
+			    "i" (&((struct stub_data *) STUB_DATA)->err)
+			  : __syscall_clobber, "r10", "r8", "r9" );
+}
+
+#endif
diff --git a/arch/um/include/sysdep-x86_64/syscalls.h b/arch/um/sys-x86_64/shared/sysdep/syscalls.h
index 7cfb0b08..7cfb0b08 100644
--- a/arch/um/include/sysdep-x86_64/syscalls.h
+++ b/arch/um/sys-x86_64/shared/sysdep/syscalls.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/system.h b/arch/um/sys-x86_64/shared/sysdep/system.h
new file mode 100644
index 0000000..d1b93c4
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/system.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_X86_SYSTEM_H_
+#define _ASM_X86_SYSTEM_H_
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/* entries in ARCH_DLINFO: */
+#ifdef CONFIG_IA32_EMULATION
+# define AT_VECTOR_SIZE_ARCH 2
+#else
+# define AT_VECTOR_SIZE_ARCH 1
+#endif
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+void default_idle(void);
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+/*
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define mb() 	asm volatile("mfence":::"memory")
+#define rmb()	asm volatile("lfence":::"memory")
+#define wmb()	asm volatile("sfence" ::: "memory")
+#endif
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+# define smp_rmb()	rmb()
+#else
+# define smp_rmb()	barrier()
+#endif
+#ifdef CONFIG_X86_OOSTORE
+# define smp_wmb() 	wmb()
+#else
+# define smp_wmb()	barrier()
+#endif
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/tls.h b/arch/um/sys-x86_64/shared/sysdep/tls.h
new file mode 100644
index 0000000..18c000d
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/tls.h
@@ -0,0 +1,29 @@
+#ifndef _SYSDEP_TLS_H
+#define _SYSDEP_TLS_H
+
+# ifndef __KERNEL__
+
+/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
+ * may be named user_desc (but in 2.4 and in header matching its API was named
+ * modify_ldt_ldt_s). */
+
+typedef struct um_dup_user_desc {
+	unsigned int  entry_number;
+	unsigned int  base_addr;
+	unsigned int  limit;
+	unsigned int  seg_32bit:1;
+	unsigned int  contents:2;
+	unsigned int  read_exec_only:1;
+	unsigned int  limit_in_pages:1;
+	unsigned int  seg_not_present:1;
+	unsigned int  useable:1;
+	unsigned int  lm:1;
+} user_desc_t;
+
+# else /* __KERNEL__ */
+
+#  include <ldt.h>
+typedef struct user_desc user_desc_t;
+
+# endif /* __KERNEL__ */
+#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/sys-x86_64/shared/sysdep/vm-flags.h b/arch/um/sys-x86_64/shared/sysdep/vm-flags.h
new file mode 100644
index 0000000..3213edf
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/vm-flags.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Copyright 2003 PathScale, Inc.
+ * Licensed under the GPL
+ */
+
+#ifndef __VM_FLAGS_X86_64_H
+#define __VM_FLAGS_X86_64_H
+
+#define __VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define __VM_STACK_FLAGS 	(VM_GROWSDOWN | VM_READ | VM_WRITE | \
+				 VM_EXEC | VM_MAYREAD | VM_MAYWRITE | \
+				 VM_MAYEXEC)
+
+extern unsigned long vm_stack_flags, vm_stack_flags32;
+extern unsigned long vm_data_default_flags, vm_data_default_flags32;
+extern unsigned long vm_force_exec32;
+
+#ifdef TIF_IA32
+#define VM_DATA_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_IA32) ? vm_data_default_flags32 : \
+	  vm_data_default_flags)
+
+#define VM_STACK_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_IA32) ? vm_stack_flags32 : vm_stack_flags)
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS vm_data_default_flags
+
+#define VM_STACK_DEFAULT_FLAGS vm_stack_flags
+
+#endif
diff --git a/arch/um/sys-x86_64/stub.S b/arch/um/sys-x86_64/stub.S
index 5687687..6d9edf9 100644
--- a/arch/um/sys-x86_64/stub.S
+++ b/arch/um/sys-x86_64/stub.S
@@ -1,4 +1,3 @@
-#include "uml-config.h"
 #include "as-layout.h"
 
 	.globl syscall_stub
diff --git a/arch/um/sys-x86_64/syscall_table.c b/arch/um/sys-x86_64/syscall_table.c
index c128eb8..dd21d69 100644
--- a/arch/um/sys-x86_64/syscall_table.c
+++ b/arch/um/sys-x86_64/syscall_table.c
@@ -41,12 +41,12 @@
 #define stub_rt_sigreturn sys_rt_sigreturn
 
 #define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef _ASM_X86_64_UNISTD_H_
-#include <asm-x86/unistd_64.h>
+#undef _ASM_X86_UNISTD_64_H
+#include "../../x86/include/asm/unistd_64.h"
 
 #undef __SYSCALL
 #define __SYSCALL(nr, sym) [ nr ] = sym,
-#undef _ASM_X86_64_UNISTD_H_
+#undef _ASM_X86_UNISTD_64_H
 
 typedef void (*sys_call_ptr_t)(void);
 
@@ -64,7 +64,7 @@ extern void sys_ni_syscall(void);
  */
 
 sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
-#include <asm-x86/unistd_64.h>
+#include "../../x86/include/asm/unistd_64.h"
 };
 
 int syscall_table_size = sizeof(sys_call_table);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ed92864..350bee1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -18,6 +18,7 @@ config X86_64
 ### Arch settings
 config X86
 	def_bool y
+	select HAVE_AOUT if X86_32
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
@@ -25,10 +26,12 @@ config X86
 	select HAVE_KPROBES
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_KRETPROBES
+	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
 	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
 	select HAVE_ARCH_KGDB if !X86_VOYAGER
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_GENERIC_DMA_COHERENT if X86_32
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 
@@ -37,10 +40,6 @@ config ARCH_DEFCONFIG
 	default "arch/x86/configs/i386_defconfig" if X86_32
 	default "arch/x86/configs/x86_64_defconfig" if X86_64
 
-
-config GENERIC_LOCKBREAK
-	def_bool n
-
 config GENERIC_TIME
 	def_bool y
 
@@ -93,7 +92,7 @@ config GENERIC_HWEIGHT
 	def_bool y
 
 config GENERIC_GPIO
-	def_bool n
+	bool
 
 config ARCH_MAY_HAVE_PC_FDC
 	def_bool y
@@ -104,12 +103,6 @@ config RWSEM_GENERIC_SPINLOCK
 config RWSEM_XCHGADD_ALGORITHM
 	def_bool X86_XADD
 
-config ARCH_HAS_ILOG2_U32
-	def_bool n
-
-config ARCH_HAS_ILOG2_U64
-	def_bool n
-
 config ARCH_HAS_CPU_IDLE_WAIT
 	def_bool y
 
@@ -123,6 +116,9 @@ config GENERIC_TIME_VSYSCALL
 config ARCH_HAS_CPU_RELAX
 	def_bool y
 
+config ARCH_HAS_DEFAULT_IDLE
+	def_bool y
+
 config ARCH_HAS_CACHE_LINE_SIZE
 	def_bool y
 
@@ -151,9 +147,6 @@ config AUDIT_ARCH
 	bool
 	default X86_64
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 config ARCH_SUPPORTS_OPTIMIZED_INLINING
 	def_bool y
 
@@ -204,6 +197,7 @@ config X86_TRAMPOLINE
 config KTIME_SCALAR
 	def_bool X86_32
 source "init/Kconfig"
+source "kernel/Kconfig.freezer"
 
 menu "Processor type and features"
 
@@ -553,6 +547,7 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
 config AMD_IOMMU
 	bool "AMD IOMMU support"
 	select SWIOTLB
+	select PCI_MSI
 	depends on X86_64 && PCI && ACPI
 	help
 	  With this option you can enable support for AMD IOMMU hardware in
@@ -758,9 +753,8 @@ config I8K
 	  Say N otherwise.
 
 config X86_REBOOTFIXUPS
-	def_bool n
-	prompt "Enable X86 board specific fixups for reboot"
-	depends on X86_32 && X86
+	bool "Enable X86 board specific fixups for reboot"
+	depends on X86_32
 	---help---
 	  This enables chipset and/or board specific fixups to be done
 	  in order to get reboot to work correctly. This is only needed on
@@ -776,23 +770,45 @@ config X86_REBOOTFIXUPS
 	  Say N otherwise.
 
 config MICROCODE
-	tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+	tristate "/dev/cpu/microcode - microcode support"
 	select FW_LOADER
 	---help---
 	  If you say Y here, you will be able to update the microcode on
-	  Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
-	  Pentium III, Pentium 4, Xeon etc.  You will obviously need the
-	  actual microcode binary data itself which is not shipped with the
-	  Linux kernel.
+	  certain Intel and AMD processors. The Intel support is for the
+	  IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
+	  Pentium 4, Xeon etc. The AMD support is for family 0x10 and
+	  0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
+	  You will obviously need the actual microcode binary data itself
+	  which is not shipped with the Linux kernel.
 
-	  For latest news and information on obtaining all the required
-	  ingredients for this driver, check:
-	  <http://www.urbanmyth.org/microcode/>.
+	  This option selects the general module only, you need to select
+	  at least one vendor specific module as well.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called microcode.
 
-config MICROCODE_OLD_INTERFACE
+config MICROCODE_INTEL
+       bool "Intel microcode patch loading support"
+       depends on MICROCODE
+       default MICROCODE
+       select FW_LOADER
+       --help---
+         This options enables microcode patch loading support for Intel
+         processors.
+
+         For latest news and information on obtaining all the required
+         Intel ingredients for this driver, check:
+         <http://www.urbanmyth.org/microcode/>.
+
+config MICROCODE_AMD
+       bool "AMD microcode patch loading support"
+       depends on MICROCODE
+       select FW_LOADER
+       --help---
+         If you select this option, microcode patch loading support for AMD
+	 processors will be enabled.
+
+   config MICROCODE_OLD_INTERFACE
 	def_bool y
 	depends on MICROCODE
 
@@ -922,16 +938,17 @@ config HIGHMEM
 	depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
 
 config X86_PAE
-	def_bool n
-	prompt "PAE (Physical Address Extension) Support"
+	bool "PAE (Physical Address Extension) Support"
 	depends on X86_32 && !HIGHMEM4G
-	select RESOURCES_64BIT
 	help
 	  PAE is required for NX support, and furthermore enables
 	  larger swapspace support for non-overcommit purposes. It
 	  has the cost of more pagetable lookup overhead, and also
 	  consumes more pagetable space per process.
 
+config ARCH_PHYS_ADDR_T_64BIT
+       def_bool X86_64 || X86_PAE
+
 # Common NUMA Features
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
@@ -1020,7 +1037,7 @@ config HAVE_ARCH_ALLOC_REMAP
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
-	depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC && !NUMA
+	depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA
 
 config ARCH_DISCONTIGMEM_ENABLE
 	def_bool y
@@ -1036,7 +1053,7 @@ config ARCH_SPARSEMEM_DEFAULT
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
-	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC)
+	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_GENERICARCH
 	select SPARSEMEM_STATIC if X86_32
 	select SPARSEMEM_VMEMMAP_ENABLE if X86_64
 
@@ -1059,6 +1076,56 @@ config HIGHPTE
 	  low memory.  Setting this option will put user-space page table
 	  entries in high memory.
 
+config X86_CHECK_BIOS_CORRUPTION
+        bool "Check for low memory corruption"
+	help
+	 Periodically check for memory corruption in low memory, which
+	 is suspected to be caused by BIOS.  Even when enabled in the
+	 configuration, it is disabled at runtime.  Enable it by
+	 setting "memory_corruption_check=1" on the kernel command
+	 line.  By default it scans the low 64k of memory every 60
+	 seconds; see the memory_corruption_check_size and
+	 memory_corruption_check_period parameters in
+	 Documentation/kernel-parameters.txt to adjust this.
+
+	 When enabled with the default parameters, this option has
+	 almost no overhead, as it reserves a relatively small amount
+	 of memory and scans it infrequently.  It both detects corruption
+	 and prevents it from affecting the running system.
+
+	 It is, however, intended as a diagnostic tool; if repeatable
+	 BIOS-originated corruption always affects the same memory,
+	 you can use memmap= to prevent the kernel from using that
+	 memory.
+
+config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
+        bool "Set the default setting of memory_corruption_check"
+	depends on X86_CHECK_BIOS_CORRUPTION
+	default y
+	help
+	 Set whether the default state of memory_corruption_check is
+	 on or off.
+
+config X86_RESERVE_LOW_64K
+        bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
+	default y
+	help
+	 Reserve the first 64K of physical RAM on BIOSes that are known
+	 to potentially corrupt that memory range. A numbers of BIOSes are
+	 known to utilize this area during suspend/resume, so it must not
+	 be used by the kernel.
+
+	 Set this to N if you are absolutely sure that you trust the BIOS
+	 to get all its memory reservations and usages right.
+
+	 If you have doubts about the BIOS (e.g. suspend/resume does not
+	 work or there's kernel crashes after certain hardware hotplug
+	 events) and it's not AMI or Phoenix, then you might want to enable
+	 X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
+	 corruption patterns.
+
+	 Say Y if unsure.
+
 config MATH_EMULATION
 	bool
 	prompt "Math emulation" if X86_32
@@ -1117,10 +1184,10 @@ config MTRR
 	  You can safely say Y even if your machine doesn't have MTRRs, you'll
 	  just add about 9 KB to your kernel.
 
-	  See <file:Documentation/mtrr.txt> for more information.
+	  See <file:Documentation/x86/mtrr.txt> for more information.
 
 config MTRR_SANITIZER
-	bool
+	def_bool y
 	prompt "MTRR cleanup support"
 	depends on MTRR
 	help
@@ -1131,7 +1198,7 @@ config MTRR_SANITIZER
 	  The largest mtrr entry size for a continous block can be set with
 	  mtrr_chunk_size.
 
-	  If unsure, say N.
+	  If unsure, say Y.
 
 config MTRR_SANITIZER_ENABLE_DEFAULT
 	int "MTRR cleanup enable value (0-1)"
@@ -1166,8 +1233,7 @@ config X86_PAT
 	  If unsure, say Y.
 
 config EFI
-	def_bool n
-	prompt "EFI runtime service support"
+	bool "EFI runtime service support"
 	depends on ACPI
 	---help---
 	This enables the kernel to use EFI runtime services that are
@@ -1180,18 +1246,9 @@ config EFI
   	resultant kernel should continue to boot on existing non-EFI
   	platforms.
 
-config IRQBALANCE
-	def_bool y
-	prompt "Enable kernel irq balancing"
-	depends on X86_32 && SMP && X86_IO_APIC
-	help
-	  The default yes will allow the kernel to do irq load balancing.
-	  Saying no will keep the kernel from doing irq load balancing.
-
 config SECCOMP
 	def_bool y
 	prompt "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
 	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
@@ -1199,7 +1256,7 @@ config SECCOMP
 	  the process as file descriptors supporting the read/write
 	  syscalls, it's possible to isolate those applications in
 	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
+	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
 	  and the task is only allowed to execute a few safe syscalls
 	  defined by each seccomp mode.
 
@@ -1356,14 +1413,14 @@ config PHYSICAL_ALIGN
 	  Don't change this unless you know what you are doing.
 
 config HOTPLUG_CPU
-	bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP && HOTPLUG && !X86_VOYAGER
 	---help---
-	  Say Y here to experiment with turning CPUs off and on, and to
-	  enable suspend on SMP systems. CPUs can be controlled through
-	  /sys/devices/system/cpu.
-	  Say N if you want to disable CPU hotplug and don't need to
-	  suspend.
+	  Say Y here to allow turning CPUs off and on. CPUs can be
+	  controlled through /sys/devices/system/cpu.
+	  ( Note: power management support will enable this option
+	    automatically on SMP systems. )
+	  Say N if you want to disable CPU hotplug.
 
 config COMPAT_VDSO
 	def_bool y
@@ -1378,6 +1435,51 @@ config COMPAT_VDSO
 
 	  If unsure, say Y.
 
+config CMDLINE_BOOL
+	bool "Built-in kernel command line"
+	default n
+	help
+	  Allow for specifying boot arguments to the kernel at
+	  build time.  On some systems (e.g. embedded ones), it is
+	  necessary or convenient to provide some or all of the
+	  kernel boot arguments with the kernel itself (that is,
+	  to not rely on the boot loader to provide them.)
+
+	  To compile command line arguments into the kernel,
+	  set this option to 'Y', then fill in the
+	  the boot arguments in CONFIG_CMDLINE.
+
+	  Systems with fully functional boot loaders (i.e. non-embedded)
+	  should leave this option set to 'N'.
+
+config CMDLINE
+	string "Built-in kernel command string"
+	depends on CMDLINE_BOOL
+	default ""
+	help
+	  Enter arguments here that should be compiled into the kernel
+	  image and used at boot time.  If the boot loader provides a
+	  command line at boot time, it is appended to this string to
+	  form the full kernel command line, when the system boots.
+
+	  However, you can use the CONFIG_CMDLINE_OVERRIDE option to
+	  change this behavior.
+
+	  In most cases, the command line (whether built-in or provided
+	  by the boot loader) should specify the device for the root
+	  file system.
+
+config CMDLINE_OVERRIDE
+	bool "Built-in command line overrides boot loader arguments"
+	default n
+	depends on CMDLINE_BOOL
+	help
+	  Set this option to 'Y' to have the kernel ignore the boot loader
+	  command line, and use ONLY the built-in command line.
+
+	  This is used to work around broken boot loaders.  This should
+	  be set to 'N' under normal conditions.
+
 endmenu
 
 config ARCH_ENABLE_MEMORY_HOTPLUG
@@ -1536,6 +1638,8 @@ source "arch/x86/kernel/cpu/cpufreq/Kconfig"
 
 source "drivers/cpuidle/Kconfig"
 
+source "drivers/idle/Kconfig"
+
 endmenu
 
 
@@ -1643,6 +1747,14 @@ config DMAR_FLOPPY_WA
 	 workaround will setup a 1:1 mapping for the first
 	 16M to make floppy (an ISA device) work.
 
+config INTR_REMAP
+	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
+	depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
+	help
+	 Supports Interrupt remapping for IO-APIC and MSI devices.
+	 To use x2apic mode in the CPU's which support x2APIC enhancements or
+	 to support platforms with CPU's having > 8 bit APIC ID, say Y.
+
 source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pci/Kconfig"
@@ -1759,7 +1871,7 @@ config IA32_EMULATION
 
 config IA32_AOUT
        tristate "IA32 a.out support"
-       depends on IA32_EMULATION && ARCH_SUPPORTS_AOUT
+       depends on IA32_EMULATION
        help
          Support old a.out binaries in the 32bit emulation.
 
@@ -1773,7 +1885,7 @@ config COMPAT_FOR_U64_ALIGNMENT
 
 config SYSVIPC_COMPAT
 	def_bool y
-	depends on X86_64 && COMPAT && SYSVIPC
+	depends on COMPAT && SYSVIPC
 
 endmenu
 
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index b225219..0b7c4a3 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -38,8 +38,7 @@ config M386
 	  - "Crusoe" for the Transmeta Crusoe series.
 	  - "Efficeon" for the Transmeta Efficeon series.
 	  - "Winchip-C6" for original IDT Winchip.
-	  - "Winchip-2" for IDT Winchip 2.
-	  - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
+	  - "Winchip-2" for IDT Winchips with 3dNow! capabilities.
 	  - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
 	  - "Geode GX/LX" For AMD Geode GX and LX processors.
 	  - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
@@ -194,19 +193,11 @@ config MWINCHIPC6
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.
 
-config MWINCHIP2
-	bool "Winchip-2"
-	depends on X86_32
-	help
-	  Select this for an IDT Winchip-2.  Linux and GCC
-	  treat this chip as a 586TSC with some extended instructions
-	  and alignment requirements.
-
 config MWINCHIP3D
-	bool "Winchip-2A/Winchip-3"
+	bool "Winchip-2/Winchip-2A/Winchip-3"
 	depends on X86_32
 	help
-	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
+	  Select this for an IDT Winchip-2, 2A or 3.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.  Also enable out of order memory
 	  stores for this CPU, which can increase performance of some
@@ -318,7 +309,7 @@ config X86_L1_CACHE_SHIFT
 	int
 	default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC
 	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
-	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
+	default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
 	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
 
 config X86_XADD
@@ -360,7 +351,7 @@ config X86_POPAD_OK
 
 config X86_ALIGNMENT_16
 	def_bool y
-	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
+	depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
 
 config X86_INTEL_USERCOPY
 	def_bool y
@@ -368,7 +359,7 @@ config X86_INTEL_USERCOPY
 
 config X86_USE_PPRO_CHECKSUM
 	def_bool y
-	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2
+	depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2
 
 config X86_USE_3DNOW
 	def_bool y
@@ -376,7 +367,7 @@ config X86_USE_3DNOW
 
 config X86_OOSTORE
 	def_bool y
-	depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
+	depends on (MWINCHIP3D || MWINCHIPC6) && MTRR
 
 #
 # P6_NOPs are a relatively minor optimization that require a family >=
@@ -396,7 +387,7 @@ config X86_P6_NOP
 
 config X86_TSC
 	def_bool y
-	depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
+	depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
 
 config X86_CMPXCHG64
 	def_bool y
@@ -406,7 +397,7 @@ config X86_CMPXCHG64
 # generates cmov.
 config X86_CMOV
 	def_bool y
-	depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || X86_64)
+	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64)
 
 config X86_MINIMUM_CPU_FAMILY
 	int
@@ -417,4 +408,124 @@ config X86_MINIMUM_CPU_FAMILY
 
 config X86_DEBUGCTLMSR
 	def_bool y
-	depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
+	depends on !(MK6 || MWINCHIPC6 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
+
+menuconfig PROCESSOR_SELECT
+	bool "Supported processor vendors" if EMBEDDED
+	help
+	  This lets you choose what x86 vendor support code your kernel
+	  will include.
+
+config CPU_SUP_INTEL
+	default y
+	bool "Support Intel processors" if PROCESSOR_SELECT
+	help
+	  This enables detection, tunings and quirks for Intel processors
+
+	  You need this enabled if you want your kernel to run on an
+	  Intel CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on an Intel
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
+
+config CPU_SUP_CYRIX_32
+	default y
+	bool "Support Cyrix processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables detection, tunings and quirks for Cyrix processors
+
+	  You need this enabled if you want your kernel to run on a
+	  Cyrix CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on a Cyrix
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
+
+config CPU_SUP_AMD
+	default y
+	bool "Support AMD processors" if PROCESSOR_SELECT
+	help
+	  This enables detection, tunings and quirks for AMD processors
+
+	  You need this enabled if you want your kernel to run on an
+	  AMD CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on an AMD
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
+
+config CPU_SUP_CENTAUR_32
+	default y
+	bool "Support Centaur processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables detection, tunings and quirks for Centaur processors
+
+	  You need this enabled if you want your kernel to run on a
+	  Centaur CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on a Centaur
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
+
+config CPU_SUP_CENTAUR_64
+	default y
+	bool "Support Centaur processors" if PROCESSOR_SELECT
+	depends on 64BIT
+	help
+	  This enables detection, tunings and quirks for Centaur processors
+
+	  You need this enabled if you want your kernel to run on a
+	  Centaur CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on a Centaur
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
+
+config CPU_SUP_TRANSMETA_32
+	default y
+	bool "Support Transmeta processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables detection, tunings and quirks for Transmeta processors
+
+	  You need this enabled if you want your kernel to run on a
+	  Transmeta CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on a Transmeta
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
+
+config CPU_SUP_UMC_32
+	default y
+	bool "Support UMC processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	help
+	  This enables detection, tunings and quirks for UMC processors
+
+	  You need this enabled if you want your kernel to run on a
+	  UMC CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on a UMC
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
+
+config X86_DS
+	bool "Debug Store support"
+	default y
+	help
+	  Add support for Debug Store.
+	  This allows the kernel to provide a memory buffer to the hardware
+	  to store various profiling and tracing events.
+
+config X86_PTRACE_BTS
+	bool "ptrace interface to Branch Trace Store"
+	default y
+	depends on (X86_DS && X86_DEBUGCTLMSR)
+	help
+	  Add a ptrace interface to allow collecting an execution trace
+	  of the traced task.
+	  This collects control flow changes in a (cyclic) buffer and allows
+	  debuggers to fill in the gaps and show an execution trace of the debuggee.
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 092f019..2a3dfbd 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -43,6 +43,19 @@ config EARLY_PRINTK
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash.
 
+config EARLY_PRINTK_DBGP
+	bool "Early printk via EHCI debug port"
+	default n
+	depends on EARLY_PRINTK && PCI
+	help
+	  Write kernel log output directly into the EHCI debug port.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. For normal operation
+	  it is not recommended because it looks ugly and doesn't cooperate
+	  with klogd/syslogd or the X server. You should normally N here,
+	  unless you want to debug such a crash. You need usb debug device.
+
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index f5631da..d1a47ad 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -110,16 +110,16 @@ KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
 mcore-y  := arch/x86/mach-default/
 
 # Voyager subarch support
-mflags-$(CONFIG_X86_VOYAGER)	:= -Iinclude/asm-x86/mach-voyager
+mflags-$(CONFIG_X86_VOYAGER)	:= -Iarch/x86/include/asm/mach-voyager
 mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager/
 
 # generic subarchitecture
-mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
+mflags-$(CONFIG_X86_GENERICARCH):= -Iarch/x86/include/asm/mach-generic
 fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
 mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
 
 # default subarch .h files
-mflags-y += -Iinclude/asm-x86/mach-default
+mflags-y += -Iarch/x86/include/asm/mach-default
 
 # 64 bit does not support subarch support - clear sub arch variables
 fcore-$(CONFIG_X86_64)  :=
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index e372b58..80177ec 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -28,7 +28,6 @@ cflags-$(CONFIG_MK8)		+= $(call cc-option,-march=k8,-march=athlon)
 cflags-$(CONFIG_MCRUSOE)	+= -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
 cflags-$(CONFIG_MEFFICEON)	+= -march=i686 $(call tune,pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
 cflags-$(CONFIG_MWINCHIPC6)	+= $(call cc-option,-march=winchip-c6,-march=i586)
-cflags-$(CONFIG_MWINCHIP2)	+= $(call cc-option,-march=winchip2,-march=i586)
 cflags-$(CONFIG_MWINCHIP3D)	+= $(call cc-option,-march=winchip2,-march=i586)
 cflags-$(CONFIG_MCYRIXIII)	+= $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
 cflags-$(CONFIG_MVIAC3_2)	+= $(call cc-option,-march=c3-2,-march=i686)
@@ -45,3 +44,8 @@ cflags-$(CONFIG_MGEODEGX1)	+= -march=pentium-mmx
 # cpu entries
 cflags-$(CONFIG_X86_GENERIC) 	+= $(call tune,generic,$(call tune,i686))
 
+# Bug fix for binutils: this option is required in order to keep
+# binutils from generating NOPL instructions against our will.
+ifneq ($(CONFIG_X86_P6_NOP),y)
+cflags-y			+= $(call cc-option,-Wa$(comma)-mtune=generic32,)
+endif
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 7ee102f..cd48c72 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -72,9 +72,7 @@ KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
 KBUILD_CFLAGS +=   $(call cc-option,-m32)
 KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
 
-$(obj)/zImage:  IMAGE_OFFSET := 0x1000
 $(obj)/zImage:  asflags-y := $(SVGA_MODE) $(RAMDISK)
-$(obj)/bzImage: IMAGE_OFFSET := 0x100000
 $(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__
 $(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
 $(obj)/bzImage: BUILDFLAGS   := -b
@@ -117,7 +115,7 @@ $(obj)/setup.bin: $(obj)/setup.elf FORCE
 	$(call if_changed,objcopy)
 
 $(obj)/compressed/vmlinux: FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 # Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
 FDARGS =
@@ -181,6 +179,7 @@ isoimage: $(BOOTIMAGE)
 	mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
 		-no-emul-boot -boot-load-size 4 -boot-info-table \
 		$(obj)/isoimage
+	isohybrid $(obj)/image.iso 2>/dev/null || true
 	rm -rf $(obj)/isoimage
 
 zlilo: $(BOOTIMAGE)
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 92fdd35..1771c80 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -27,9 +27,8 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
 
-ifeq ($(CONFIG_X86_32),y)
-targets += vmlinux.bin.all vmlinux.relocs
-hostprogs-y := relocs
+targets += vmlinux.bin.all vmlinux.relocs relocs
+hostprogs-$(CONFIG_X86_32) += relocs
 
 quiet_cmd_relocs = RELOCS  $@
       cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
@@ -43,6 +42,8 @@ quiet_cmd_relocbin = BUILD   $@
 $(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,relocbin)
 
+ifeq ($(CONFIG_X86_32),y)
+
 ifdef CONFIG_RELOCATABLE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
 	$(call if_changed,gzip)
@@ -59,6 +60,5 @@ $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
 endif
 
-
 $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
 	$(call if_changed,ld)
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index ba7736c..29c5fbf 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -137,14 +137,15 @@ relocated:
  */
 	movl output_len(%ebx), %eax
 	pushl %eax
+			# push arguments for decompress_kernel:
 	pushl %ebp	# output address
 	movl input_len(%ebx), %eax
 	pushl %eax	# input_len
 	leal input_data(%ebx), %eax
 	pushl %eax	# input_data
 	leal boot_heap(%ebx), %eax
-	pushl %eax	# heap area as third argument
-	pushl %esi	# real mode pointer as second arg
+	pushl %eax	# heap area
+	pushl %esi	# real mode pointer
 	call decompress_kernel
 	addl $20, %esp
 	popl %ecx
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 9fea737..da06221 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -16,7 +16,7 @@
  */
 #undef CONFIG_PARAVIRT
 #ifdef CONFIG_X86_32
-#define _ASM_DESC_H_ 1
+#define _ASM_X86_DESC_H 1
 #endif
 
 #ifdef CONFIG_X86_64
@@ -27,7 +27,7 @@
 #include <linux/linkage.h>
 #include <linux/screen_info.h>
 #include <linux/elf.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/page.h>
 #include <asm/boot.h>
 #include <asm/bootparam.h>
@@ -251,7 +251,7 @@ static void __putstr(int error, const char *s)
 				y--;
 			}
 		} else {
-			vidmem [(x + cols * y) * 2] = c;
+			vidmem[(x + cols * y) * 2] = c;
 			if (++x >= cols) {
 				x = 0;
 				if (++y >= lines) {
@@ -277,7 +277,8 @@ static void *memset(void *s, int c, unsigned n)
 	int i;
 	char *ss = s;
 
-	for (i = 0; i < n; i++) ss[i] = c;
+	for (i = 0; i < n; i++)
+		ss[i] = c;
 	return s;
 }
 
@@ -287,7 +288,8 @@ static void *memcpy(void *dest, const void *src, unsigned n)
 	const char *s = src;
 	char *d = dest;
 
-	for (i = 0; i < n; i++) d[i] = s[i];
+	for (i = 0; i < n; i++)
+		d[i] = s[i];
 	return dest;
 }
 
diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c
index a1310c5..857e492 100644
--- a/arch/x86/boot/compressed/relocs.c
+++ b/arch/x86/boot/compressed/relocs.c
@@ -492,7 +492,7 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym))
 			continue;
 		}
 		sh_symtab = sec_symtab->symtab;
-		sym_strtab = sec->link->strtab;
+		sym_strtab = sec_symtab->link->strtab;
 		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
 			Elf32_Rel *rel;
 			Elf32_Sym *sym;
diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c
index 75298fe..6ec6bb6 100644
--- a/arch/x86/boot/cpu.c
+++ b/arch/x86/boot/cpu.c
@@ -59,17 +59,18 @@ int validate_cpu(void)
 			u32 e = err_flags[i];
 
 			for (j = 0; j < 32; j++) {
-				int n = (i << 5)+j;
-				if (*msg_strs < n) {
+				if (msg_strs[0] < i ||
+				    (msg_strs[0] == i && msg_strs[1] < j)) {
 					/* Skip to the next string */
-					do {
-						msg_strs++;
-					} while (*msg_strs);
-					msg_strs++;
+					msg_strs += 2;
+					while (*msg_strs++)
+						;
 				}
 				if (e & 1) {
-					if (*msg_strs == n && msg_strs[1])
-						printf("%s ", msg_strs+1);
+					if (msg_strs[0] == i &&
+					    msg_strs[1] == j &&
+					    msg_strs[2])
+						printf("%s ", msg_strs+2);
 					else
 						printf("%d:%d ", i, j);
 				}
diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c
index d93cbc6..1aae8f3 100644
--- a/arch/x86/boot/edd.c
+++ b/arch/x86/boot/edd.c
@@ -41,6 +41,7 @@ static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
 	char *mbrbuf_ptr, *mbrbuf_end;
 	u32 buf_base, mbr_base;
 	extern char _end[];
+	u16 mbr_magic;
 
 	sector_size = ei->params.bytes_per_sector;
 	if (!sector_size)
@@ -58,11 +59,15 @@ static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
 	if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr)
 		return -1;
 
+	memset(mbrbuf_ptr, 0, sector_size);
 	if (read_mbr(devno, mbrbuf_ptr))
 		return -1;
 
 	*mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET];
-	return 0;
+	mbr_magic = *(u16 *)&mbrbuf_ptr[510];
+
+	/* check for valid MBR magic */
+	return mbr_magic == 0xAA55 ? 0 : -1;
 }
 
 static int get_edd_info(u8 devno, struct edd_info *ei)
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index af86e43..b993062 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -30,7 +30,6 @@ SYSSEG		= DEF_SYSSEG		/* system loaded at 0x10000 (65536) */
 SYSSIZE		= DEF_SYSSIZE		/* system size: # of 16-byte clicks */
 					/* to be loaded */
 ROOT_DEV	= 0			/* ROOT_DEV is now written by "build" */
-SWAP_DEV	= 0			/* SWAP_DEV is now written by "build" */
 
 #ifndef SVGA_MODE
 #define SVGA_MODE ASK_VGA
diff --git a/arch/x86/boot/mkcpustr.c b/arch/x86/boot/mkcpustr.c
index bbe7695..8ef60f2 100644
--- a/arch/x86/boot/mkcpustr.c
+++ b/arch/x86/boot/mkcpustr.c
@@ -15,33 +15,33 @@
 
 #include <stdio.h>
 
-#include "../kernel/cpu/feature_names.c"
-
-#if NCAPFLAGS > 8
-# error "Need to adjust the boot code handling of CPUID strings"
-#endif
+#include "../kernel/cpu/capflags.c"
 
 int main(void)
 {
-	int i;
+	int i, j;
 	const char *str;
 
 	printf("static const char x86_cap_strs[] = \n");
 
-	for (i = 0; i < NCAPINTS*32; i++) {
-		str = x86_cap_flags[i];
-
-		if (i == NCAPINTS*32-1) {
-			/* The last entry must be unconditional; this
-			   also consumes the compiler-added null character */
-			if (!str)
-				str = "";
-			printf("\t\"\\x%02x\"\"%s\"\n", i, str);
-		} else if (str) {
-			printf("#if REQUIRED_MASK%d & (1 << %d)\n"
-			       "\t\"\\x%02x\"\"%s\\0\"\n"
-			       "#endif\n",
-			       i >> 5, i & 31, i, str);
+	for (i = 0; i < NCAPINTS; i++) {
+		for (j = 0; j < 32; j++) {
+			str = x86_cap_flags[i*32+j];
+
+			if (i == NCAPINTS-1 && j == 31) {
+				/* The last entry must be unconditional; this
+				   also consumes the compiler-added null
+				   character */
+				if (!str)
+					str = "";
+				printf("\t\"\\x%02x\\x%02x\"\"%s\"\n",
+				       i, j, str);
+			} else if (str) {
+				printf("#if REQUIRED_MASK%d & (1 << %d)\n"
+				       "\t\"\\x%02x\\x%02x\"\"%s\\0\"\n"
+				       "#endif\n",
+				       i, j, i, j, str);
+			}
 		}
 	}
 	printf("\t;\n");
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index 49f26aa..3fa979c 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -17,7 +17,7 @@
 #include "boot.h"
 #include "video.h"
 
-__videocard video_bios;
+static __videocard video_bios;
 
 /* Set a conventional BIOS mode */
 static int set_bios_mode(u8 mode);
@@ -119,7 +119,7 @@ static int bios_probe(void)
 	return nmodes;
 }
 
-__videocard video_bios =
+static __videocard video_bios =
 {
 	.card_name	= "BIOS",
 	.probe		= bios_probe,
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 401ad99..7511584 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -20,7 +20,7 @@
 static struct vesa_general_info vginfo;
 static struct vesa_mode_info vminfo;
 
-__videocard video_vesa;
+static __videocard video_vesa;
 
 #ifndef _WAKEUP
 static void vesa_store_mode_params_graphics(void);
@@ -88,14 +88,11 @@ static int vesa_probe(void)
 			   (vminfo.memory_layout == 4 ||
 			    vminfo.memory_layout == 6) &&
 			   vminfo.memory_planes == 1) {
-#ifdef CONFIG_FB
+#ifdef CONFIG_FB_BOOT_VESA_SUPPORT
 			/* Graphics mode, color, linear frame buffer
 			   supported.  Only register the mode if
 			   if framebuffer is configured, however,
-			   otherwise the user will be left without a screen.
-			   We don't require CONFIG_FB_VESA, however, since
-			   some of the other framebuffer drivers can use
-			   this mode-setting, too. */
+			   otherwise the user will be left without a screen. */
 			mi = GET_HEAP(struct mode_info, 1);
 			mi->mode = mode + VIDEO_FIRST_VESA;
 			mi->depth = vminfo.bpp;
@@ -133,10 +130,12 @@ static int vesa_set_mode(struct mode_info *mode)
 	if ((vminfo.mode_attr & 0x15) == 0x05) {
 		/* It's a supported text mode */
 		is_graphic = 0;
+#ifdef CONFIG_FB_BOOT_VESA_SUPPORT
 	} else if ((vminfo.mode_attr & 0x99) == 0x99) {
 		/* It's a graphics mode with linear frame buffer */
 		is_graphic = 1;
 		vesa_mode |= 0x4000; /* Request linear frame buffer */
+#endif
 	} else {
 		return -1;	/* Invalid mode */
 	}
@@ -224,7 +223,7 @@ static void vesa_store_pm_info(void)
 static void vesa_store_mode_params_graphics(void)
 {
 	/* Tell the kernel we're in VESA graphics mode */
-	boot_params.screen_info.orig_video_isVGA = 0x23;
+	boot_params.screen_info.orig_video_isVGA = VIDEO_TYPE_VLFB;
 
 	/* Mode parameters */
 	boot_params.screen_info.vesa_attributes = vminfo.mode_attr;
@@ -294,7 +293,7 @@ void vesa_store_edid(void)
 
 #endif /* not _WAKEUP */
 
-__videocard video_vesa =
+static __videocard video_vesa =
 {
 	.card_name	= "VESA",
 	.probe		= vesa_probe,
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 104275e..13b8c86 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Mon Aug 25 15:04:00 2008
+# Linux kernel version: 2.6.27-rc5
+# Wed Sep  3 17:23:09 2008
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
@@ -202,7 +202,7 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_M586 is not set
 # CONFIG_M586TSC is not set
 # CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
+CONFIG_M686=y
 # CONFIG_MPENTIUMII is not set
 # CONFIG_MPENTIUMIII is not set
 # CONFIG_MPENTIUMM is not set
@@ -213,7 +213,6 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_MCRUSOE is not set
 # CONFIG_MEFFICEON is not set
 # CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
 # CONFIG_MWINCHIP3D is not set
 # CONFIG_MGEODEGX1 is not set
 # CONFIG_MGEODE_LX is not set
@@ -221,13 +220,14 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_MVIAC3_2 is not set
 # CONFIG_MVIAC7 is not set
 # CONFIG_MPSC is not set
-CONFIG_MCORE2=y
+# CONFIG_MCORE2 is not set
 # CONFIG_GENERIC_CPU is not set
 CONFIG_X86_GENERIC=y
 CONFIG_X86_CPU=y
 CONFIG_X86_CMPXCHG=y
 CONFIG_X86_L1_CACHE_SHIFT=7
 CONFIG_X86_XADD=y
+# CONFIG_X86_PPRO_FENCE is not set
 CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INVLPG=y
 CONFIG_X86_BSWAP=y
@@ -235,14 +235,15 @@ CONFIG_X86_POPAD_OK=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
 CONFIG_X86_TSC=y
+CONFIG_X86_CMOV=y
 CONFIG_X86_MINIMUM_CPU_FAMILY=4
 CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
 CONFIG_DMI=y
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_NR_CPUS=4
-# CONFIG_SCHED_SMT is not set
+CONFIG_NR_CPUS=64
+CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -254,7 +255,8 @@ CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
 CONFIG_X86_REBOOTFIXUPS=y
-# CONFIG_MICROCODE is not set
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
 # CONFIG_NOHIGHMEM is not set
@@ -285,7 +287,6 @@ CONFIG_MTRR=y
 # CONFIG_MTRR_SANITIZER is not set
 CONFIG_X86_PAT=y
 CONFIG_EFI=y
-# CONFIG_IRQBALANCE is not set
 CONFIG_SECCOMP=y
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_250 is not set
@@ -1532,7 +1533,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_VGA_CONSOLE=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
@@ -2115,7 +2115,7 @@ CONFIG_IO_DELAY_0X80=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=0
 CONFIG_DEBUG_BOOT_PARAMS=y
 # CONFIG_CPA_DEBUG is not set
-# CONFIG_OPTIMIZE_INLINING is not set
+CONFIG_OPTIMIZE_INLINING=y
 
 #
 # Security options
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 678c8ac..f0a03d7 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Mon Aug 25 14:40:46 2008
+# Linux kernel version: 2.6.27-rc5
+# Wed Sep  3 17:13:39 2008
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
@@ -210,7 +210,6 @@ CONFIG_X86_PC=y
 # CONFIG_MCRUSOE is not set
 # CONFIG_MEFFICEON is not set
 # CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
 # CONFIG_MWINCHIP3D is not set
 # CONFIG_MGEODEGX1 is not set
 # CONFIG_MGEODE_LX is not set
@@ -218,17 +217,14 @@ CONFIG_X86_PC=y
 # CONFIG_MVIAC3_2 is not set
 # CONFIG_MVIAC7 is not set
 # CONFIG_MPSC is not set
-CONFIG_MCORE2=y
-# CONFIG_GENERIC_CPU is not set
+# CONFIG_MCORE2 is not set
+CONFIG_GENERIC_CPU=y
 CONFIG_X86_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=64
-CONFIG_X86_INTERNODE_CACHE_BYTES=64
+CONFIG_X86_L1_CACHE_BYTES=128
+CONFIG_X86_INTERNODE_CACHE_BYTES=128
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
 CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
 CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CMOV=y
@@ -243,9 +239,8 @@ CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
 CONFIG_AMD_IOMMU=y
 CONFIG_SWIOTLB=y
 CONFIG_IOMMU_HELPER=y
-# CONFIG_MAXSMP is not set
-CONFIG_NR_CPUS=4
-# CONFIG_SCHED_SMT is not set
+CONFIG_NR_CPUS=64
+CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -254,7 +249,8 @@ CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
 # CONFIG_X86_MCE is not set
 # CONFIG_I8K is not set
-# CONFIG_MICROCODE is not set
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
 CONFIG_NUMA=y
@@ -290,7 +286,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_MTRR=y
 # CONFIG_MTRR_SANITIZER is not set
-# CONFIG_X86_PAT is not set
+CONFIG_X86_PAT=y
 CONFIG_EFI=y
 CONFIG_SECCOMP=y
 # CONFIG_HZ_100 is not set
@@ -1508,7 +1504,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_VGA_CONSOLE=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
@@ -2089,7 +2084,7 @@ CONFIG_IO_DELAY_0X80=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=0
 CONFIG_DEBUG_BOOT_PARAMS=y
 # CONFIG_CPA_DEBUG is not set
-# CONFIG_OPTIMIZE_INLINING is not set
+CONFIG_OPTIMIZE_INLINING=y
 
 #
 # Security options
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 3874c2d..903de4a 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o
 obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o
 obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o
 
+obj-$(CONFIG_CRYPTO_CRC32C_INTEL) += crc32c-intel.o
+
 aes-i586-y := aes-i586-asm_32.o aes_glue.o
 twofish-i586-y := twofish-i586-asm_32.o twofish_glue.o
 salsa20-i586-y := salsa20-i586-asm_32.o salsa20_glue.o
diff --git a/arch/x86/crypto/crc32c-intel.c b/arch/x86/crypto/crc32c-intel.c
new file mode 100644
index 0000000..070afc5
--- /dev/null
+++ b/arch/x86/crypto/crc32c-intel.c
@@ -0,0 +1,197 @@
+/*
+ * Using hardware provided CRC32 instruction to accelerate the CRC32 disposal.
+ * CRC32C polynomial:0x1EDC6F41(BE)/0x82F63B78(LE)
+ * CRC32 is a new instruction in Intel SSE4.2, the reference can be found at:
+ * http://www.intel.com/products/processor/manuals/
+ * Intel(R) 64 and IA-32 Architectures Software Developer's Manual
+ * Volume 2A: Instruction Set Reference, A-M
+ *
+ * Copyright (c) 2008 Austin Zhang <austin_zhang@linux.intel.com>
+ * Copyright (c) 2008 Kent Liu <kent.liu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <crypto/internal/hash.h>
+
+#include <asm/cpufeature.h>
+
+#define CHKSUM_BLOCK_SIZE	1
+#define CHKSUM_DIGEST_SIZE	4
+
+#define SCALE_F	sizeof(unsigned long)
+
+#ifdef CONFIG_X86_64
+#define REX_PRE "0x48, "
+#else
+#define REX_PRE
+#endif
+
+static u32 crc32c_intel_le_hw_byte(u32 crc, unsigned char const *data, size_t length)
+{
+	while (length--) {
+		__asm__ __volatile__(
+			".byte 0xf2, 0xf, 0x38, 0xf0, 0xf1"
+			:"=S"(crc)
+			:"0"(crc), "c"(*data)
+		);
+		data++;
+	}
+
+	return crc;
+}
+
+static u32 __pure crc32c_intel_le_hw(u32 crc, unsigned char const *p, size_t len)
+{
+	unsigned int iquotient = len / SCALE_F;
+	unsigned int iremainder = len % SCALE_F;
+	unsigned long *ptmp = (unsigned long *)p;
+
+	while (iquotient--) {
+		__asm__ __volatile__(
+			".byte 0xf2, " REX_PRE "0xf, 0x38, 0xf1, 0xf1;"
+			:"=S"(crc)
+			:"0"(crc), "c"(*ptmp)
+		);
+		ptmp++;
+	}
+
+	if (iremainder)
+		crc = crc32c_intel_le_hw_byte(crc, (unsigned char *)ptmp,
+				 iremainder);
+
+	return crc;
+}
+
+/*
+ * Setting the seed allows arbitrary accumulators and flexible XOR policy
+ * If your algorithm starts with ~0, then XOR with ~0 before you set
+ * the seed.
+ */
+static int crc32c_intel_setkey(struct crypto_ahash *hash, const u8 *key,
+			unsigned int keylen)
+{
+	u32 *mctx = crypto_ahash_ctx(hash);
+
+	if (keylen != sizeof(u32)) {
+		crypto_ahash_set_flags(hash, CRYPTO_TFM_RES_BAD_KEY_LEN);
+		return -EINVAL;
+	}
+	*mctx = le32_to_cpup((__le32 *)key);
+	return 0;
+}
+
+static int crc32c_intel_init(struct ahash_request *req)
+{
+	u32 *mctx = crypto_ahash_ctx(crypto_ahash_reqtfm(req));
+	u32 *crcp = ahash_request_ctx(req);
+
+	*crcp = *mctx;
+
+	return 0;
+}
+
+static int crc32c_intel_update(struct ahash_request *req)
+{
+	struct crypto_hash_walk walk;
+	u32 *crcp = ahash_request_ctx(req);
+	u32 crc = *crcp;
+	int nbytes;
+
+	for (nbytes = crypto_hash_walk_first(req, &walk); nbytes;
+	   nbytes = crypto_hash_walk_done(&walk, 0))
+	crc = crc32c_intel_le_hw(crc, walk.data, nbytes);
+
+	*crcp = crc;
+	return 0;
+}
+
+static int crc32c_intel_final(struct ahash_request *req)
+{
+	u32 *crcp = ahash_request_ctx(req);
+
+	*(__le32 *)req->result = ~cpu_to_le32p(crcp);
+	return 0;
+}
+
+static int crc32c_intel_digest(struct ahash_request *req)
+{
+	struct crypto_hash_walk walk;
+	u32 *mctx = crypto_ahash_ctx(crypto_ahash_reqtfm(req));
+	u32 crc = *mctx;
+	int nbytes;
+
+	for (nbytes = crypto_hash_walk_first(req, &walk); nbytes;
+	   nbytes = crypto_hash_walk_done(&walk, 0))
+		crc = crc32c_intel_le_hw(crc, walk.data, nbytes);
+
+	*(__le32 *)req->result = ~cpu_to_le32(crc);
+	return 0;
+}
+
+static int crc32c_intel_cra_init(struct crypto_tfm *tfm)
+{
+	u32 *key = crypto_tfm_ctx(tfm);
+
+	*key = ~0;
+
+	tfm->crt_ahash.reqsize = sizeof(u32);
+
+	return 0;
+}
+
+static struct crypto_alg alg = {
+	.cra_name               =       "crc32c",
+	.cra_driver_name        =       "crc32c-intel",
+	.cra_priority           =       200,
+	.cra_flags              =       CRYPTO_ALG_TYPE_AHASH,
+	.cra_blocksize          =       CHKSUM_BLOCK_SIZE,
+	.cra_alignmask          =       3,
+	.cra_ctxsize            =       sizeof(u32),
+	.cra_module             =       THIS_MODULE,
+	.cra_list               =       LIST_HEAD_INIT(alg.cra_list),
+	.cra_init               =       crc32c_intel_cra_init,
+	.cra_type               =       &crypto_ahash_type,
+	.cra_u                  =       {
+		.ahash = {
+			.digestsize    =       CHKSUM_DIGEST_SIZE,
+			.setkey        =       crc32c_intel_setkey,
+			.init          =       crc32c_intel_init,
+			.update        =       crc32c_intel_update,
+			.final         =       crc32c_intel_final,
+			.digest        =       crc32c_intel_digest,
+		}
+	}
+};
+
+
+static int __init crc32c_intel_mod_init(void)
+{
+	if (cpu_has_xmm4_2)
+		return crypto_register_alg(&alg);
+	else
+		return -ENODEV;
+}
+
+static void __exit crc32c_intel_mod_fini(void)
+{
+	crypto_unregister_alg(&alg);
+}
+
+module_init(crc32c_intel_mod_init);
+module_exit(crc32c_intel_mod_fini);
+
+MODULE_AUTHOR("Austin Zhang <austin.zhang@intel.com>, Kent Liu <kent.liu@intel.com>");
+MODULE_DESCRIPTION("CRC32c (Castagnoli) optimization using Intel Hardware.");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("crc32c");
+MODULE_ALIAS("crc32c-intel");
+
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index a0e1dbe..127ec3f 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -85,8 +85,10 @@ static void dump_thread32(struct pt_regs *regs, struct user32 *dump)
 	dump->regs.ax = regs->ax;
 	dump->regs.ds = current->thread.ds;
 	dump->regs.es = current->thread.es;
-	asm("movl %%fs,%0" : "=r" (fs)); dump->regs.fs = fs;
-	asm("movl %%gs,%0" : "=r" (gs)); dump->regs.gs = gs;
+	savesegment(fs, fs);
+	dump->regs.fs = fs;
+	savesegment(gs, gs);
+	dump->regs.gs = gs;
 	dump->regs.orig_ax = regs->orig_ax;
 	dump->regs.ip = regs->ip;
 	dump->regs.cs = regs->cs;
@@ -430,8 +432,9 @@ beyond_if:
 	current->mm->start_stack =
 		(unsigned long)create_aout_tables((char __user *)bprm->p, bprm);
 	/* start thread */
-	asm volatile("movl %0,%%fs" :: "r" (0)); \
-	asm volatile("movl %0,%%es; movl %0,%%ds": :"r" (__USER32_DS));
+	loadsegment(fs, 0);
+	loadsegment(ds, __USER32_DS);
+	loadsegment(es, __USER32_DS);
 	load_gs_index(0);
 	(regs)->ip = ex.a_entry;
 	(regs)->sp = current->mm->start_stack;
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 20af4c7..4bc02b2 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -179,9 +179,10 @@ struct sigframe
 	u32 pretcode;
 	int sig;
 	struct sigcontext_ia32 sc;
-	struct _fpstate_ia32 fpstate;
+	struct _fpstate_ia32 fpstate_unused; /* look at kernel/sigframe.h */
 	unsigned int extramask[_COMPAT_NSIG_WORDS-1];
 	char retcode[8];
+	/* fp state follows here */
 };
 
 struct rt_sigframe
@@ -192,8 +193,8 @@ struct rt_sigframe
 	u32 puc;
 	compat_siginfo_t info;
 	struct ucontext_ia32 uc;
-	struct _fpstate_ia32 fpstate;
 	char retcode[8];
+	/* fp state follows here */
 };
 
 #define COPY(x)		{ 		\
@@ -206,7 +207,7 @@ struct rt_sigframe
 	{ unsigned int cur;						\
 	  unsigned short pre;						\
 	  err |= __get_user(pre, &sc->seg);				\
-	  asm volatile("movl %%" #seg ",%0" : "=r" (cur));		\
+	  savesegment(seg, cur);					\
 	  pre |= mask;							\
 	  if (pre != cur) loadsegment(seg, pre); }
 
@@ -215,7 +216,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 				   unsigned int *peax)
 {
 	unsigned int tmpflags, gs, oldgs, err = 0;
-	struct _fpstate_ia32 __user *buf;
+	void __user *buf;
 	u32 tmp;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -235,7 +236,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 	 */
 	err |= __get_user(gs, &sc->gs);
 	gs |= 3;
-	asm("movl %%gs,%0" : "=r" (oldgs));
+	savesegment(gs, oldgs);
 	if (gs != oldgs)
 		load_gs_index(gs);
 
@@ -259,26 +260,12 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 
 	err |= __get_user(tmp, &sc->fpstate);
 	buf = compat_ptr(tmp);
-	if (buf) {
-		if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
-			goto badframe;
-		err |= restore_i387_ia32(buf);
-	} else {
-		struct task_struct *me = current;
-
-		if (used_math()) {
-			clear_fpu(me);
-			clear_used_math();
-		}
-	}
+	err |= restore_i387_xstate_ia32(buf);
 
 	err |= __get_user(tmp, &sc->ax);
 	*peax = tmp;
 
 	return err;
-
-badframe:
-	return 1;
 }
 
 asmlinkage long sys32_sigreturn(struct pt_regs *regs)
@@ -350,46 +337,42 @@ badframe:
  */
 
 static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
-				 struct _fpstate_ia32 __user *fpstate,
+				 void __user *fpstate,
 				 struct pt_regs *regs, unsigned int mask)
 {
 	int tmp, err = 0;
 
-	tmp = 0;
-	__asm__("movl %%gs,%0" : "=r"(tmp): "0"(tmp));
+	savesegment(gs, tmp);
 	err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
-	__asm__("movl %%fs,%0" : "=r"(tmp): "0"(tmp));
+	savesegment(fs, tmp);
 	err |= __put_user(tmp, (unsigned int __user *)&sc->fs);
-	__asm__("movl %%ds,%0" : "=r"(tmp): "0"(tmp));
+	savesegment(ds, tmp);
 	err |= __put_user(tmp, (unsigned int __user *)&sc->ds);
-	__asm__("movl %%es,%0" : "=r"(tmp): "0"(tmp));
+	savesegment(es, tmp);
 	err |= __put_user(tmp, (unsigned int __user *)&sc->es);
 
-	err |= __put_user((u32)regs->di, &sc->di);
-	err |= __put_user((u32)regs->si, &sc->si);
-	err |= __put_user((u32)regs->bp, &sc->bp);
-	err |= __put_user((u32)regs->sp, &sc->sp);
-	err |= __put_user((u32)regs->bx, &sc->bx);
-	err |= __put_user((u32)regs->dx, &sc->dx);
-	err |= __put_user((u32)regs->cx, &sc->cx);
-	err |= __put_user((u32)regs->ax, &sc->ax);
-	err |= __put_user((u32)regs->cs, &sc->cs);
-	err |= __put_user((u32)regs->ss, &sc->ss);
+	err |= __put_user(regs->di, &sc->di);
+	err |= __put_user(regs->si, &sc->si);
+	err |= __put_user(regs->bp, &sc->bp);
+	err |= __put_user(regs->sp, &sc->sp);
+	err |= __put_user(regs->bx, &sc->bx);
+	err |= __put_user(regs->dx, &sc->dx);
+	err |= __put_user(regs->cx, &sc->cx);
+	err |= __put_user(regs->ax, &sc->ax);
+	err |= __put_user(regs->cs, &sc->cs);
+	err |= __put_user(regs->ss, &sc->ss);
 	err |= __put_user(current->thread.trap_no, &sc->trapno);
 	err |= __put_user(current->thread.error_code, &sc->err);
-	err |= __put_user((u32)regs->ip, &sc->ip);
-	err |= __put_user((u32)regs->flags, &sc->flags);
-	err |= __put_user((u32)regs->sp, &sc->sp_at_signal);
+	err |= __put_user(regs->ip, &sc->ip);
+	err |= __put_user(regs->flags, &sc->flags);
+	err |= __put_user(regs->sp, &sc->sp_at_signal);
 
-	tmp = save_i387_ia32(fpstate);
+	tmp = save_i387_xstate_ia32(fpstate);
 	if (tmp < 0)
 		err = -EFAULT;
-	else {
-		clear_used_math();
-		stts();
+	else
 		err |= __put_user(ptr_to_compat(tmp ? fpstate : NULL),
 					&sc->fpstate);
-	}
 
 	/* non-iBCS2 extensions.. */
 	err |= __put_user(mask, &sc->oldmask);
@@ -402,7 +385,8 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
  * Determine which stack to use..
  */
 static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
-				 size_t frame_size)
+				 size_t frame_size,
+				 void **fpstate)
 {
 	unsigned long sp;
 
@@ -421,6 +405,11 @@ static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 		 ka->sa.sa_restorer)
 		sp = (unsigned long) ka->sa.sa_restorer;
 
+	if (used_math()) {
+		sp = sp - sig_xstate_ia32_size;
+		*fpstate = (struct _fpstate_ia32 *) sp;
+	}
+
 	sp -= frame_size;
 	/* Align the stack pointer according to the i386 ABI,
 	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
@@ -434,6 +423,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 	struct sigframe __user *frame;
 	void __user *restorer;
 	int err = 0;
+	void __user *fpstate = NULL;
 
 	/* copy_to_user optimizes that into a single 8 byte store */
 	static const struct {
@@ -448,25 +438,21 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 		0,
 	};
 
-	frame = get_sigframe(ka, regs, sizeof(*frame));
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
+		return -EFAULT;
 
-	err |= __put_user(sig, &frame->sig);
-	if (err)
-		goto give_sigsegv;
+	if (__put_user(sig, &frame->sig))
+		return -EFAULT;
 
-	err |= ia32_setup_sigcontext(&frame->sc, &frame->fpstate, regs,
-					set->sig[0]);
-	if (err)
-		goto give_sigsegv;
+	if (ia32_setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]))
+		return -EFAULT;
 
 	if (_COMPAT_NSIG_WORDS > 1) {
-		err |= __copy_to_user(frame->extramask, &set->sig[1],
-				      sizeof(frame->extramask));
-		if (err)
-			goto give_sigsegv;
+		if (__copy_to_user(frame->extramask, &set->sig[1],
+				   sizeof(frame->extramask)))
+			return -EFAULT;
 	}
 
 	if (ka->sa.sa_flags & SA_RESTORER) {
@@ -487,7 +473,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 	 */
 	err |= __copy_to_user(frame->retcode, &code, 8);
 	if (err)
-		goto give_sigsegv;
+		return -EFAULT;
 
 	/* Set up registers for signal handler */
 	regs->sp = (unsigned long) frame;
@@ -498,8 +484,8 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 	regs->dx = 0;
 	regs->cx = 0;
 
-	asm volatile("movl %0,%%ds" :: "r" (__USER32_DS));
-	asm volatile("movl %0,%%es" :: "r" (__USER32_DS));
+	loadsegment(ds, __USER32_DS);
+	loadsegment(es, __USER32_DS);
 
 	regs->cs = __USER32_CS;
 	regs->ss = __USER32_DS;
@@ -510,10 +496,6 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 #endif
 
 	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return -EFAULT;
 }
 
 int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
@@ -522,6 +504,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	struct rt_sigframe __user *frame;
 	void __user *restorer;
 	int err = 0;
+	void __user *fpstate = NULL;
 
 	/* __copy_to_user optimizes that into a single 8 byte store */
 	static const struct {
@@ -537,30 +520,33 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		0,
 	};
 
-	frame = get_sigframe(ka, regs, sizeof(*frame));
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
+		return -EFAULT;
 
 	err |= __put_user(sig, &frame->sig);
 	err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo);
 	err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc);
 	err |= copy_siginfo_to_user32(&frame->info, info);
 	if (err)
-		goto give_sigsegv;
+		return -EFAULT;
 
 	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
+	if (cpu_has_xsave)
+		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+	else
+		err |= __put_user(0, &frame->uc.uc_flags);
 	err |= __put_user(0, &frame->uc.uc_link);
 	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->sp),
 			  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
+	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
 				     regs, set->sig[0]);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
-		goto give_sigsegv;
+		return -EFAULT;
 
 	if (ka->sa.sa_flags & SA_RESTORER)
 		restorer = ka->sa.sa_restorer;
@@ -575,7 +561,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	 */
 	err |= __copy_to_user(frame->retcode, &code, 8);
 	if (err)
-		goto give_sigsegv;
+		return -EFAULT;
 
 	/* Set up registers for signal handler */
 	regs->sp = (unsigned long) frame;
@@ -591,8 +577,8 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->dx = (unsigned long) &frame->info;
 	regs->cx = (unsigned long) &frame->uc;
 
-	asm volatile("movl %0,%%ds" :: "r" (__USER32_DS));
-	asm volatile("movl %0,%%es" :: "r" (__USER32_DS));
+	loadsegment(ds, __USER32_DS);
+	loadsegment(es, __USER32_DS);
 
 	regs->cs = __USER32_CS;
 	regs->ss = __USER32_DS;
@@ -603,8 +589,4 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 #endif
 
 	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return -EFAULT;
 }
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index ffc1bb4..256b00b 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -39,11 +39,11 @@
 	.endm 
 
 	/* clobbers %eax */	
-	.macro  CLEAR_RREGS
+	.macro  CLEAR_RREGS _r9=rax
 	xorl 	%eax,%eax
 	movq	%rax,R11(%rsp)
 	movq	%rax,R10(%rsp)
-	movq	%rax,R9(%rsp)
+	movq	%\_r9,R9(%rsp)
 	movq	%rax,R8(%rsp)
 	.endm
 
@@ -52,11 +52,10 @@
 	 * We don't reload %eax because syscall_trace_enter() returned
 	 * the value it wants us to use in the table lookup.
 	 */
-	.macro LOAD_ARGS32 offset
-	movl \offset(%rsp),%r11d
-	movl \offset+8(%rsp),%r10d
+	.macro LOAD_ARGS32 offset, _r9=0
+	.if \_r9
 	movl \offset+16(%rsp),%r9d
-	movl \offset+24(%rsp),%r8d
+	.endif
 	movl \offset+40(%rsp),%ecx
 	movl \offset+48(%rsp),%edx
 	movl \offset+56(%rsp),%esi
@@ -145,7 +144,7 @@ ENTRY(ia32_sysenter_target)
 	SAVE_ARGS 0,0,1
  	/* no need to do an access_ok check here because rbp has been
  	   32bit zero extended */ 
-1:	movl	(%rbp),%r9d
+1:	movl	(%rbp),%ebp
  	.section __ex_table,"a"
  	.quad 1b,ia32_badarg
  	.previous	
@@ -157,7 +156,7 @@ ENTRY(ia32_sysenter_target)
 	cmpl	$(IA32_NR_syscalls-1),%eax
 	ja	ia32_badsys
 sysenter_do_call:
-	IA32_ARG_FIXUP 1
+	IA32_ARG_FIXUP
 sysenter_dispatch:
 	call	*ia32_sys_call_table(,%rax,8)
 	movq	%rax,RAX-ARGOFFSET(%rsp)
@@ -234,20 +233,17 @@ sysexit_audit:
 #endif
 
 sysenter_tracesys:
-	xchgl	%r9d,%ebp
 #ifdef CONFIG_AUDITSYSCALL
 	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
 	jz	sysenter_auditsys
 #endif
 	SAVE_REST
 	CLEAR_RREGS
-	movq	%r9,R9(%rsp)
 	movq	$-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
 	movq	%rsp,%rdi        /* &pt_regs -> arg1 */
 	call	syscall_trace_enter
 	LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
-	xchgl	%ebp,%r9d
 	cmpl	$(IA32_NR_syscalls-1),%eax
 	ja	int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
 	jmp	sysenter_do_call
@@ -314,9 +310,9 @@ ENTRY(ia32_cstar_target)
 	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	CFI_REMEMBER_STATE
 	jnz   cstar_tracesys
-cstar_do_call:	
 	cmpl $IA32_NR_syscalls-1,%eax
 	ja  ia32_badsys
+cstar_do_call:
 	IA32_ARG_FIXUP 1
 cstar_dispatch:
 	call *ia32_sys_call_table(,%rax,8)
@@ -357,15 +353,13 @@ cstar_tracesys:
 #endif
 	xchgl %r9d,%ebp
 	SAVE_REST
-	CLEAR_RREGS
-	movq %r9,R9(%rsp)
+	CLEAR_RREGS r9
 	movq $-ENOSYS,RAX(%rsp)	/* ptrace can change this for a bad syscall */
 	movq %rsp,%rdi        /* &pt_regs -> arg1 */
 	call syscall_trace_enter
-	LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
+	LOAD_ARGS32 ARGOFFSET, 1  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
 	xchgl %ebp,%r9d
-	movl RSP-ARGOFFSET(%rsp), %r8d
 	cmpl $(IA32_NR_syscalls-1),%eax
 	ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */
 	jmp cstar_do_call
@@ -577,8 +571,8 @@ ia32_sys_call_table:
 	.quad compat_sys_setrlimit	/* 75 */
 	.quad compat_sys_old_getrlimit	/* old_getrlimit */
 	.quad compat_sys_getrusage
-	.quad sys32_gettimeofday
-	.quad sys32_settimeofday
+	.quad compat_sys_gettimeofday
+	.quad compat_sys_settimeofday
 	.quad sys_getgroups16	/* 80 */
 	.quad sys_setgroups16
 	.quad sys32_old_select
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index d3c6408..2e09dcd 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -49,41 +49,6 @@
 
 #define AA(__x)		((unsigned long)(__x))
 
-int cp_compat_stat(struct kstat *kbuf, struct compat_stat __user *ubuf)
-{
-	compat_ino_t ino;
-
-	typeof(ubuf->st_uid) uid = 0;
-	typeof(ubuf->st_gid) gid = 0;
-	SET_UID(uid, kbuf->uid);
-	SET_GID(gid, kbuf->gid);
-	if (!old_valid_dev(kbuf->dev) || !old_valid_dev(kbuf->rdev))
-		return -EOVERFLOW;
-	if (kbuf->size >= 0x7fffffff)
-		return -EOVERFLOW;
-	ino = kbuf->ino;
-	if (sizeof(ino) < sizeof(kbuf->ino) && ino != kbuf->ino)
-		return -EOVERFLOW;
-	if (!access_ok(VERIFY_WRITE, ubuf, sizeof(struct compat_stat)) ||
-	    __put_user(old_encode_dev(kbuf->dev), &ubuf->st_dev) ||
-	    __put_user(ino, &ubuf->st_ino) ||
-	    __put_user(kbuf->mode, &ubuf->st_mode) ||
-	    __put_user(kbuf->nlink, &ubuf->st_nlink) ||
-	    __put_user(uid, &ubuf->st_uid) ||
-	    __put_user(gid, &ubuf->st_gid) ||
-	    __put_user(old_encode_dev(kbuf->rdev), &ubuf->st_rdev) ||
-	    __put_user(kbuf->size, &ubuf->st_size) ||
-	    __put_user(kbuf->atime.tv_sec, &ubuf->st_atime) ||
-	    __put_user(kbuf->atime.tv_nsec, &ubuf->st_atime_nsec) ||
-	    __put_user(kbuf->mtime.tv_sec, &ubuf->st_mtime) ||
-	    __put_user(kbuf->mtime.tv_nsec, &ubuf->st_mtime_nsec) ||
-	    __put_user(kbuf->ctime.tv_sec, &ubuf->st_ctime) ||
-	    __put_user(kbuf->ctime.tv_nsec, &ubuf->st_ctime_nsec) ||
-	    __put_user(kbuf->blksize, &ubuf->st_blksize) ||
-	    __put_user(kbuf->blocks, &ubuf->st_blocks))
-		return -EFAULT;
-	return 0;
-}
 
 asmlinkage long sys32_truncate64(char __user *filename,
 				 unsigned long offset_low,
@@ -402,75 +367,11 @@ asmlinkage long sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
 	return 0;
 }
 
-static inline long get_tv32(struct timeval *o, struct compat_timeval __user *i)
-{
-	int err = -EFAULT;
-
-	if (access_ok(VERIFY_READ, i, sizeof(*i))) {
-		err = __get_user(o->tv_sec, &i->tv_sec);
-		err |= __get_user(o->tv_usec, &i->tv_usec);
-	}
-	return err;
-}
-
-static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
-{
-	int err = -EFAULT;
-
-	if (access_ok(VERIFY_WRITE, o, sizeof(*o))) {
-		err = __put_user(i->tv_sec, &o->tv_sec);
-		err |= __put_user(i->tv_usec, &o->tv_usec);
-	}
-	return err;
-}
-
 asmlinkage long sys32_alarm(unsigned int seconds)
 {
 	return alarm_setitimer(seconds);
 }
 
-/*
- * Translations due to time_t size differences. Which affects all
- * sorts of things, like timeval and itimerval.
- */
-asmlinkage long sys32_gettimeofday(struct compat_timeval __user *tv,
-				   struct timezone __user *tz)
-{
-	if (tv) {
-		struct timeval ktv;
-
-		do_gettimeofday(&ktv);
-		if (put_tv32(tv, &ktv))
-			return -EFAULT;
-	}
-	if (tz) {
-		if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-asmlinkage long sys32_settimeofday(struct compat_timeval __user *tv,
-				   struct timezone __user *tz)
-{
-	struct timeval ktv;
-	struct timespec kts;
-	struct timezone ktz;
-
-	if (tv) {
-		if (get_tv32(&ktv, tv))
-			return -EFAULT;
-		kts.tv_sec = ktv.tv_sec;
-		kts.tv_nsec = ktv.tv_usec * NSEC_PER_USEC;
-	}
-	if (tz) {
-		if (copy_from_user(&ktz, tz, sizeof(ktz)))
-			return -EFAULT;
-	}
-
-	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
-}
-
 struct sel_arg_struct {
 	unsigned int n;
 	unsigned int inp;
@@ -556,15 +457,6 @@ asmlinkage long sys32_rt_sigqueueinfo(int pid, int sig,
 	return ret;
 }
 
-/* These are here just in case some old ia32 binary calls it. */
-asmlinkage long sys32_pause(void)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	return -ERESTARTNOHAND;
-}
-
-
 #ifdef CONFIG_SYSCTL_SYSCALL
 struct sysctl_ia32 {
 	unsigned int	name;
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
new file mode 100644
index 0000000..4a8e80c
--- /dev/null
+++ b/arch/x86/include/asm/Kbuild
@@ -0,0 +1,24 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += boot.h
+header-y += bootparam.h
+header-y += debugreg.h
+header-y += ldt.h
+header-y += msr-index.h
+header-y += prctl.h
+header-y += ptrace-abi.h
+header-y += sigcontext32.h
+header-y += ucontext.h
+header-y += processor-flags.h
+
+unifdef-y += e820.h
+unifdef-y += ist.h
+unifdef-y += mce.h
+unifdef-y += msr.h
+unifdef-y += mtrr.h
+unifdef-y += posix_types_32.h
+unifdef-y += posix_types_64.h
+unifdef-y += unistd_32.h
+unifdef-y += unistd_64.h
+unifdef-y += vm86.h
+unifdef-y += vsyscall.h
diff --git a/arch/x86/include/asm/a.out-core.h b/arch/x86/include/asm/a.out-core.h
new file mode 100644
index 0000000..3782220
--- /dev/null
+++ b/arch/x86/include/asm/a.out-core.h
@@ -0,0 +1,73 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_X86_A_OUT_CORE_H
+#define _ASM_X86_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+#ifdef CONFIG_X86_32
+
+#include <linux/user.h>
+#include <linux/elfcore.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+	u16 gs;
+
+/* changed the size calculations - should hopefully work better. lbt */
+	dump->magic = CMAGIC;
+	dump->start_code = 0;
+	dump->start_stack = regs->sp & ~(PAGE_SIZE - 1);
+	dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT;
+	dump->u_dsize = ((unsigned long)(current->mm->brk + (PAGE_SIZE - 1)))
+			>> PAGE_SHIFT;
+	dump->u_dsize -= dump->u_tsize;
+	dump->u_ssize = 0;
+	dump->u_debugreg[0] = current->thread.debugreg0;
+	dump->u_debugreg[1] = current->thread.debugreg1;
+	dump->u_debugreg[2] = current->thread.debugreg2;
+	dump->u_debugreg[3] = current->thread.debugreg3;
+	dump->u_debugreg[4] = 0;
+	dump->u_debugreg[5] = 0;
+	dump->u_debugreg[6] = current->thread.debugreg6;
+	dump->u_debugreg[7] = current->thread.debugreg7;
+
+	if (dump->start_stack < TASK_SIZE)
+		dump->u_ssize = ((unsigned long)(TASK_SIZE - dump->start_stack))
+				>> PAGE_SHIFT;
+
+	dump->regs.bx = regs->bx;
+	dump->regs.cx = regs->cx;
+	dump->regs.dx = regs->dx;
+	dump->regs.si = regs->si;
+	dump->regs.di = regs->di;
+	dump->regs.bp = regs->bp;
+	dump->regs.ax = regs->ax;
+	dump->regs.ds = (u16)regs->ds;
+	dump->regs.es = (u16)regs->es;
+	dump->regs.fs = (u16)regs->fs;
+	savesegment(gs, gs);
+	dump->regs.orig_ax = regs->orig_ax;
+	dump->regs.ip = regs->ip;
+	dump->regs.cs = (u16)regs->cs;
+	dump->regs.flags = regs->flags;
+	dump->regs.sp = regs->sp;
+	dump->regs.ss = (u16)regs->ss;
+
+	dump->u_fpvalid = dump_fpu(regs, &dump->i387);
+}
+
+#endif /* CONFIG_X86_32 */
+#endif /* __KERNEL__ */
+#endif /* _ASM_X86_A_OUT_CORE_H */
diff --git a/arch/x86/include/asm/a.out.h b/arch/x86/include/asm/a.out.h
new file mode 100644
index 0000000..4684f97
--- /dev/null
+++ b/arch/x86/include/asm/a.out.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_A_OUT_H
+#define _ASM_X86_A_OUT_H
+
+struct exec
+{
+	unsigned int a_info;	/* Use macros N_MAGIC, etc for access */
+	unsigned a_text;	/* length of text, in bytes */
+	unsigned a_data;	/* length of data, in bytes */
+	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+	unsigned a_syms;	/* length of symbol table data in file, in bytes */
+	unsigned a_entry;	/* start address */
+	unsigned a_trsize;	/* length of relocation info for text, in bytes */
+	unsigned a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif /* _ASM_X86_A_OUT_H */
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
new file mode 100644
index 0000000..8d676d8
--- /dev/null
+++ b/arch/x86/include/asm/acpi.h
@@ -0,0 +1,178 @@
+#ifndef _ASM_X86_ACPI_H
+#define _ASM_X86_ACPI_H
+
+/*
+ *  Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2001 Patrick Mochel <mochel@osdl.org>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#include <acpi/pdc_intel.h>
+
+#include <asm/numa.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/mpspec.h>
+
+#define COMPILER_DEPENDENT_INT64   long long
+#define COMPILER_DEPENDENT_UINT64  unsigned long long
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE      - External ACPI interfaces
+ * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+/* Asm macros */
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS() local_irq_disable()
+#define ACPI_ENABLE_IRQS()  local_irq_enable()
+#define ACPI_FLUSH_CPU_CACHE()	wbinvd()
+
+int __acpi_acquire_global_lock(unsigned int *lock);
+int __acpi_release_global_lock(unsigned int *lock);
+
+#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \
+	((Acq) = __acpi_acquire_global_lock(&facs->global_lock))
+
+#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
+	((Acq) = __acpi_release_global_lock(&facs->global_lock))
+
+/*
+ * Math helper asm macros
+ */
+#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \
+	asm("divl %2;"				     \
+	    : "=a"(q32), "=d"(r32)		     \
+	    : "r"(d32),				     \
+	     "0"(n_lo), "1"(n_hi))
+
+
+#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \
+	asm("shrl   $1,%2	;"	\
+	    "rcrl   $1,%3;"		\
+	    : "=r"(n_hi), "=r"(n_lo)	\
+	    : "0"(n_hi), "1"(n_lo))
+
+#ifdef CONFIG_ACPI
+extern int acpi_lapic;
+extern int acpi_ioapic;
+extern int acpi_noirq;
+extern int acpi_strict;
+extern int acpi_disabled;
+extern int acpi_ht;
+extern int acpi_pci_disabled;
+extern int acpi_skip_timer_override;
+extern int acpi_use_timer_override;
+
+extern u8 acpi_sci_flags;
+extern int acpi_sci_override_gsi;
+void acpi_pic_sci_set_trigger(unsigned int, u16);
+
+static inline void disable_acpi(void)
+{
+	acpi_disabled = 1;
+	acpi_ht = 0;
+	acpi_pci_disabled = 1;
+	acpi_noirq = 1;
+}
+
+/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
+#define FIX_ACPI_PAGES 4
+
+extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
+
+static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
+static inline void acpi_disable_pci(void)
+{
+	acpi_pci_disabled = 1;
+	acpi_noirq_set();
+}
+extern int acpi_irq_balance_set(char *str);
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern void acpi_restore_state_mem(void);
+
+extern unsigned long acpi_wakeup_address;
+
+/* early initialization routine */
+extern void acpi_reserve_bootmem(void);
+
+/*
+ * Check if the CPU can handle C2 and deeper
+ */
+static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
+{
+	/*
+	 * Early models (<=5) of AMD Opterons are not supposed to go into
+	 * C2 state.
+	 *
+	 * Steppings 0x0A and later are good
+	 */
+	if (boot_cpu_data.x86 == 0x0F &&
+	    boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+	    boot_cpu_data.x86_model <= 0x05 &&
+	    boot_cpu_data.x86_mask < 0x0A)
+		return 1;
+	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+		return 1;
+	else
+		return max_cstate;
+}
+
+#else /* !CONFIG_ACPI */
+
+#define acpi_lapic 0
+#define acpi_ioapic 0
+static inline void acpi_noirq_set(void) { }
+static inline void acpi_disable_pci(void) { }
+static inline void disable_acpi(void) { }
+
+#endif /* !CONFIG_ACPI */
+
+#define ARCH_HAS_POWER_INIT	1
+
+struct bootnode;
+
+#ifdef CONFIG_ACPI_NUMA
+extern int acpi_numa;
+extern int acpi_scan_nodes(unsigned long start, unsigned long end);
+#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
+extern void acpi_fake_nodes(const struct bootnode *fake_nodes,
+				   int num_nodes);
+#else
+static inline void acpi_fake_nodes(const struct bootnode *fake_nodes,
+				   int num_nodes)
+{
+}
+#endif
+
+#define acpi_unlazy_tlb(x)	leave_mm(x)
+
+#endif /* _ASM_X86_ACPI_H */
diff --git a/arch/x86/include/asm/agp.h b/arch/x86/include/asm/agp.h
new file mode 100644
index 0000000..9825cd6
--- /dev/null
+++ b/arch/x86/include/asm/agp.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_X86_AGP_H
+#define _ASM_X86_AGP_H
+
+#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Functions to keep the agpgart mappings coherent with the MMU. The
+ * GART gives the CPU a physical alias of pages in memory. The alias
+ * region is mapped uncacheable. Make sure there are no conflicting
+ * mappings with different cachability attributes for the same
+ * page. This avoids data corruption on some CPUs.
+ */
+
+#define map_page_into_agp(page) set_pages_uc(page, 1)
+#define unmap_page_from_agp(page) set_pages_wb(page, 1)
+
+/*
+ * Could use CLFLUSH here if the cpu supports it. But then it would
+ * need to be called for each cacheline of the whole page so it may
+ * not be worth it. Would need a page for it.
+ */
+#define flush_agp_cache() wbinvd()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif /* _ASM_X86_AGP_H */
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
new file mode 100644
index 0000000..e2077d3
--- /dev/null
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -0,0 +1,22 @@
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_X86_32
+# define X86_ALIGN .long
+#else
+# define X86_ALIGN .quad
+#endif
+
+#ifdef CONFIG_SMP
+	.macro LOCK_PREFIX
+1:	lock
+	.section .smp_locks,"a"
+	.align 4
+	X86_ALIGN 1b
+	.previous
+	.endm
+#else
+	.macro LOCK_PREFIX
+	.endm
+#endif
+
+#endif  /*  __ASSEMBLY__  */
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
new file mode 100644
index 0000000..f6aa18e
--- /dev/null
+++ b/arch/x86/include/asm/alternative.h
@@ -0,0 +1,183 @@
+#ifndef _ASM_X86_ALTERNATIVE_H
+#define _ASM_X86_ALTERNATIVE_H
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <asm/asm.h>
+
+/*
+ * Alternative inline assembly for SMP.
+ *
+ * The LOCK_PREFIX macro defined here replaces the LOCK and
+ * LOCK_PREFIX macros used everywhere in the source tree.
+ *
+ * SMP alternatives use the same data structures as the other
+ * alternatives and the X86_FEATURE_UP flag to indicate the case of a
+ * UP system running a SMP kernel.  The existing apply_alternatives()
+ * works fine for patching a SMP kernel for UP.
+ *
+ * The SMP alternative tables can be kept after boot and contain both
+ * UP and SMP versions of the instructions to allow switching back to
+ * SMP at runtime, when hotplugging in a new CPU, which is especially
+ * useful in virtualized environments.
+ *
+ * The very common lock prefix is handled as special case in a
+ * separate table which is a pure address list without replacement ptr
+ * and size information.  That keeps the table sizes small.
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX \
+		".section .smp_locks,\"a\"\n"	\
+		_ASM_ALIGN "\n"			\
+		_ASM_PTR "661f\n" /* address */	\
+		".previous\n"			\
+		"661:\n\tlock; "
+
+#else /* ! CONFIG_SMP */
+#define LOCK_PREFIX ""
+#endif
+
+/* This must be included *after* the definition of LOCK_PREFIX */
+#include <asm/cpufeature.h>
+
+struct alt_instr {
+	u8 *instr;		/* original instruction */
+	u8 *replacement;
+	u8  cpuid;		/* cpuid bit set for replacement */
+	u8  instrlen;		/* length of original instruction */
+	u8  replacementlen;	/* length of new instruction, <= instrlen */
+	u8  pad1;
+#ifdef CONFIG_X86_64
+	u32 pad2;
+#endif
+};
+
+extern void alternative_instructions(void);
+extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
+
+struct module;
+
+#ifdef CONFIG_SMP
+extern void alternatives_smp_module_add(struct module *mod, char *name,
+					void *locks, void *locks_end,
+					void *text, void *text_end);
+extern void alternatives_smp_module_del(struct module *mod);
+extern void alternatives_smp_switch(int smp);
+#else
+static inline void alternatives_smp_module_add(struct module *mod, char *name,
+					       void *locks, void *locks_end,
+					       void *text, void *text_end) {}
+static inline void alternatives_smp_module_del(struct module *mod) {}
+static inline void alternatives_smp_switch(int smp) {}
+#endif	/* CONFIG_SMP */
+
+const unsigned char *const *find_nop_table(void);
+
+/*
+ * Alternative instructions for different CPU types or capabilities.
+ *
+ * This allows to use optimized instructions even on generic binary
+ * kernels.
+ *
+ * length of oldinstr must be longer or equal the length of newinstr
+ * It can be padded with nops as needed.
+ *
+ * For non barrier like inlines please define new variants
+ * without volatile and memory clobber.
+ */
+#define alternative(oldinstr, newinstr, feature)			\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
+		      ".section .altinstructions,\"a\"\n"		\
+		      _ASM_ALIGN "\n"					\
+		      _ASM_PTR "661b\n"		/* label */		\
+		      _ASM_PTR "663f\n"		/* new instruction */	\
+		      "	 .byte %c0\n"		/* feature bit */	\
+		      "	 .byte 662b-661b\n"	/* sourcelen */		\
+		      "	 .byte 664f-663f\n"	/* replacementlen */	\
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
+		      ".previous" :: "i" (feature) : "memory")
+
+/*
+ * Alternative inline assembly with input.
+ *
+ * Pecularities:
+ * No memory clobber here.
+ * Argument numbers start with 1.
+ * Best is to use constraints that are fixed size (like (%1) ... "r")
+ * If you use variable sized constraints like "m" or "g" in the
+ * replacement make sure to pad to the worst case length.
+ */
+#define alternative_input(oldinstr, newinstr, feature, input...)	\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
+		      ".section .altinstructions,\"a\"\n"		\
+		      _ASM_ALIGN "\n"					\
+		      _ASM_PTR "661b\n"		/* label */		\
+		      _ASM_PTR "663f\n"		/* new instruction */	\
+		      "	 .byte %c0\n"		/* feature bit */	\
+		      "	 .byte 662b-661b\n"	/* sourcelen */		\
+		      "	 .byte 664f-663f\n"	/* replacementlen */	\
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
+		      ".previous" :: "i" (feature), ##input)
+
+/* Like alternative_input, but with a single output argument */
+#define alternative_io(oldinstr, newinstr, feature, output, input...)	\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
+		      ".section .altinstructions,\"a\"\n"		\
+		      _ASM_ALIGN "\n"					\
+		      _ASM_PTR "661b\n"		/* label */		\
+		      _ASM_PTR "663f\n"		/* new instruction */	\
+		      "	 .byte %c[feat]\n"	/* feature bit */	\
+		      "	 .byte 662b-661b\n"	/* sourcelen */		\
+		      "	 .byte 664f-663f\n"	/* replacementlen */	\
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
+		      ".previous" : output : [feat] "i" (feature), ##input)
+
+/*
+ * use this macro(s) if you need more than one output parameter
+ * in alternative_io
+ */
+#define ASM_OUTPUT2(a, b) a, b
+
+struct paravirt_patch_site;
+#ifdef CONFIG_PARAVIRT
+void apply_paravirt(struct paravirt_patch_site *start,
+		    struct paravirt_patch_site *end);
+#else
+static inline void apply_paravirt(struct paravirt_patch_site *start,
+				  struct paravirt_patch_site *end)
+{}
+#define __parainstructions	NULL
+#define __parainstructions_end	NULL
+#endif
+
+extern void add_nops(void *insns, unsigned int len);
+
+/*
+ * Clear and restore the kernel write-protection flag on the local CPU.
+ * Allows the kernel to edit read-only pages.
+ * Side-effect: any interrupt handler running between save and restore will have
+ * the ability to write to read-only pages.
+ *
+ * Warning:
+ * Code patching in the UP case is safe if NMIs and MCE handlers are stopped and
+ * no thread can be preempted in the instructions being modified (no iret to an
+ * invalid instruction possible) or if the instructions are changed from a
+ * consistent state to another consistent state atomically.
+ * More care must be taken when modifying code in the SMP case because of
+ * Intel's errata.
+ * On the local CPU you need to be protected again NMI or MCE handlers seeing an
+ * inconsistent instruction while you patch.
+ * The _early version expects the memory to already be RW.
+ */
+
+extern void *text_poke(void *addr, const void *opcode, size_t len);
+extern void *text_poke_early(void *addr, const void *opcode, size_t len);
+
+#endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h
new file mode 100644
index 0000000..f712344
--- /dev/null
+++ b/arch/x86/include/asm/amd_iommu.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *         Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_AMD_IOMMU_H
+#define _ASM_X86_AMD_IOMMU_H
+
+#include <linux/irqreturn.h>
+
+#ifdef CONFIG_AMD_IOMMU
+extern int amd_iommu_init(void);
+extern int amd_iommu_init_dma_ops(void);
+extern void amd_iommu_detect(void);
+extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
+#else
+static inline int amd_iommu_init(void) { return -ENODEV; }
+static inline void amd_iommu_detect(void) { }
+#endif
+
+#endif /* _ASM_X86_AMD_IOMMU_H */
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
new file mode 100644
index 0000000..1a30c04
--- /dev/null
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -0,0 +1,404 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *         Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_AMD_IOMMU_TYPES_H
+#define _ASM_X86_AMD_IOMMU_TYPES_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/*
+ * some size calculation constants
+ */
+#define DEV_TABLE_ENTRY_SIZE		32
+#define ALIAS_TABLE_ENTRY_SIZE		2
+#define RLOOKUP_TABLE_ENTRY_SIZE	(sizeof(void *))
+
+/* Length of the MMIO region for the AMD IOMMU */
+#define MMIO_REGION_LENGTH       0x4000
+
+/* Capability offsets used by the driver */
+#define MMIO_CAP_HDR_OFFSET	0x00
+#define MMIO_RANGE_OFFSET	0x0c
+#define MMIO_MISC_OFFSET	0x10
+
+/* Masks, shifts and macros to parse the device range capability */
+#define MMIO_RANGE_LD_MASK	0xff000000
+#define MMIO_RANGE_FD_MASK	0x00ff0000
+#define MMIO_RANGE_BUS_MASK	0x0000ff00
+#define MMIO_RANGE_LD_SHIFT	24
+#define MMIO_RANGE_FD_SHIFT	16
+#define MMIO_RANGE_BUS_SHIFT	8
+#define MMIO_GET_LD(x)  (((x) & MMIO_RANGE_LD_MASK) >> MMIO_RANGE_LD_SHIFT)
+#define MMIO_GET_FD(x)  (((x) & MMIO_RANGE_FD_MASK) >> MMIO_RANGE_FD_SHIFT)
+#define MMIO_GET_BUS(x) (((x) & MMIO_RANGE_BUS_MASK) >> MMIO_RANGE_BUS_SHIFT)
+#define MMIO_MSI_NUM(x)	((x) & 0x1f)
+
+/* Flag masks for the AMD IOMMU exclusion range */
+#define MMIO_EXCL_ENABLE_MASK 0x01ULL
+#define MMIO_EXCL_ALLOW_MASK  0x02ULL
+
+/* Used offsets into the MMIO space */
+#define MMIO_DEV_TABLE_OFFSET   0x0000
+#define MMIO_CMD_BUF_OFFSET     0x0008
+#define MMIO_EVT_BUF_OFFSET     0x0010
+#define MMIO_CONTROL_OFFSET     0x0018
+#define MMIO_EXCL_BASE_OFFSET   0x0020
+#define MMIO_EXCL_LIMIT_OFFSET  0x0028
+#define MMIO_CMD_HEAD_OFFSET	0x2000
+#define MMIO_CMD_TAIL_OFFSET	0x2008
+#define MMIO_EVT_HEAD_OFFSET	0x2010
+#define MMIO_EVT_TAIL_OFFSET	0x2018
+#define MMIO_STATUS_OFFSET	0x2020
+
+/* MMIO status bits */
+#define MMIO_STATUS_COM_WAIT_INT_MASK	0x04
+
+/* event logging constants */
+#define EVENT_ENTRY_SIZE	0x10
+#define EVENT_TYPE_SHIFT	28
+#define EVENT_TYPE_MASK		0xf
+#define EVENT_TYPE_ILL_DEV	0x1
+#define EVENT_TYPE_IO_FAULT	0x2
+#define EVENT_TYPE_DEV_TAB_ERR	0x3
+#define EVENT_TYPE_PAGE_TAB_ERR	0x4
+#define EVENT_TYPE_ILL_CMD	0x5
+#define EVENT_TYPE_CMD_HARD_ERR	0x6
+#define EVENT_TYPE_IOTLB_INV_TO	0x7
+#define EVENT_TYPE_INV_DEV_REQ	0x8
+#define EVENT_DEVID_MASK	0xffff
+#define EVENT_DEVID_SHIFT	0
+#define EVENT_DOMID_MASK	0xffff
+#define EVENT_DOMID_SHIFT	0
+#define EVENT_FLAGS_MASK	0xfff
+#define EVENT_FLAGS_SHIFT	0x10
+
+/* feature control bits */
+#define CONTROL_IOMMU_EN        0x00ULL
+#define CONTROL_HT_TUN_EN       0x01ULL
+#define CONTROL_EVT_LOG_EN      0x02ULL
+#define CONTROL_EVT_INT_EN      0x03ULL
+#define CONTROL_COMWAIT_EN      0x04ULL
+#define CONTROL_PASSPW_EN       0x08ULL
+#define CONTROL_RESPASSPW_EN    0x09ULL
+#define CONTROL_COHERENT_EN     0x0aULL
+#define CONTROL_ISOC_EN         0x0bULL
+#define CONTROL_CMDBUF_EN       0x0cULL
+#define CONTROL_PPFLOG_EN       0x0dULL
+#define CONTROL_PPFINT_EN       0x0eULL
+
+/* command specific defines */
+#define CMD_COMPL_WAIT          0x01
+#define CMD_INV_DEV_ENTRY       0x02
+#define CMD_INV_IOMMU_PAGES     0x03
+
+#define CMD_COMPL_WAIT_STORE_MASK	0x01
+#define CMD_COMPL_WAIT_INT_MASK		0x02
+#define CMD_INV_IOMMU_PAGES_SIZE_MASK	0x01
+#define CMD_INV_IOMMU_PAGES_PDE_MASK	0x02
+
+#define CMD_INV_IOMMU_ALL_PAGES_ADDRESS	0x7fffffffffffffffULL
+
+/* macros and definitions for device table entries */
+#define DEV_ENTRY_VALID         0x00
+#define DEV_ENTRY_TRANSLATION   0x01
+#define DEV_ENTRY_IR            0x3d
+#define DEV_ENTRY_IW            0x3e
+#define DEV_ENTRY_NO_PAGE_FAULT	0x62
+#define DEV_ENTRY_EX            0x67
+#define DEV_ENTRY_SYSMGT1       0x68
+#define DEV_ENTRY_SYSMGT2       0x69
+#define DEV_ENTRY_INIT_PASS     0xb8
+#define DEV_ENTRY_EINT_PASS     0xb9
+#define DEV_ENTRY_NMI_PASS      0xba
+#define DEV_ENTRY_LINT0_PASS    0xbe
+#define DEV_ENTRY_LINT1_PASS    0xbf
+#define DEV_ENTRY_MODE_MASK	0x07
+#define DEV_ENTRY_MODE_SHIFT	0x09
+
+/* constants to configure the command buffer */
+#define CMD_BUFFER_SIZE    8192
+#define CMD_BUFFER_ENTRIES 512
+#define MMIO_CMD_SIZE_SHIFT 56
+#define MMIO_CMD_SIZE_512 (0x9ULL << MMIO_CMD_SIZE_SHIFT)
+
+/* constants for event buffer handling */
+#define EVT_BUFFER_SIZE		8192 /* 512 entries */
+#define EVT_LEN_MASK		(0x9ULL << 56)
+
+#define PAGE_MODE_1_LEVEL 0x01
+#define PAGE_MODE_2_LEVEL 0x02
+#define PAGE_MODE_3_LEVEL 0x03
+
+#define IOMMU_PDE_NL_0   0x000ULL
+#define IOMMU_PDE_NL_1   0x200ULL
+#define IOMMU_PDE_NL_2   0x400ULL
+#define IOMMU_PDE_NL_3   0x600ULL
+
+#define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
+#define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
+#define IOMMU_PTE_L0_INDEX(address) (((address) >> 12) & 0x1ffULL)
+
+#define IOMMU_MAP_SIZE_L1 (1ULL << 21)
+#define IOMMU_MAP_SIZE_L2 (1ULL << 30)
+#define IOMMU_MAP_SIZE_L3 (1ULL << 39)
+
+#define IOMMU_PTE_P  (1ULL << 0)
+#define IOMMU_PTE_TV (1ULL << 1)
+#define IOMMU_PTE_U  (1ULL << 59)
+#define IOMMU_PTE_FC (1ULL << 60)
+#define IOMMU_PTE_IR (1ULL << 61)
+#define IOMMU_PTE_IW (1ULL << 62)
+
+#define IOMMU_L1_PDE(address) \
+	((address) | IOMMU_PDE_NL_1 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+#define IOMMU_L2_PDE(address) \
+	((address) | IOMMU_PDE_NL_2 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+
+#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
+#define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
+#define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
+#define IOMMU_PTE_MODE(pte) (((pte) >> 9) & 0x07)
+
+#define IOMMU_PROT_MASK 0x03
+#define IOMMU_PROT_IR 0x01
+#define IOMMU_PROT_IW 0x02
+
+/* IOMMU capabilities */
+#define IOMMU_CAP_IOTLB   24
+#define IOMMU_CAP_NPCACHE 26
+
+#define MAX_DOMAIN_ID 65536
+
+/* FIXME: move this macro to <linux/pci.h> */
+#define PCI_BUS(x) (((x) >> 8) & 0xff)
+
+/*
+ * This structure contains generic data for  IOMMU protection domains
+ * independent of their use.
+ */
+struct protection_domain {
+	spinlock_t lock; /* mostly used to lock the page table*/
+	u16 id;		 /* the domain id written to the device table */
+	int mode;	 /* paging mode (0-6 levels) */
+	u64 *pt_root;	 /* page table root pointer */
+	void *priv;	 /* private data */
+};
+
+/*
+ * Data container for a dma_ops specific protection domain
+ */
+struct dma_ops_domain {
+	struct list_head list;
+
+	/* generic protection domain information */
+	struct protection_domain domain;
+
+	/* size of the aperture for the mappings */
+	unsigned long aperture_size;
+
+	/* address we start to search for free addresses */
+	unsigned long next_bit;
+
+	/* address allocation bitmap */
+	unsigned long *bitmap;
+
+	/*
+	 * Array of PTE pages for the aperture. In this array we save all the
+	 * leaf pages of the domain page table used for the aperture. This way
+	 * we don't need to walk the page table to find a specific PTE. We can
+	 * just calculate its address in constant time.
+	 */
+	u64 **pte_pages;
+
+	/* This will be set to true when TLB needs to be flushed */
+	bool need_flush;
+
+	/*
+	 * if this is a preallocated domain, keep the device for which it was
+	 * preallocated in this variable
+	 */
+	u16 target_dev;
+};
+
+/*
+ * Structure where we save information about one hardware AMD IOMMU in the
+ * system.
+ */
+struct amd_iommu {
+	struct list_head list;
+
+	/* locks the accesses to the hardware */
+	spinlock_t lock;
+
+	/* Pointer to PCI device of this IOMMU */
+	struct pci_dev *dev;
+
+	/*
+	 * Capability pointer. There could be more than one IOMMU per PCI
+	 * device function if there are more than one AMD IOMMU capability
+	 * pointers.
+	 */
+	u16 cap_ptr;
+
+	/* physical address of MMIO space */
+	u64 mmio_phys;
+	/* virtual address of MMIO space */
+	u8 *mmio_base;
+
+	/* capabilities of that IOMMU read from ACPI */
+	u32 cap;
+
+	/* pci domain of this IOMMU */
+	u16 pci_seg;
+
+	/* first device this IOMMU handles. read from PCI */
+	u16 first_device;
+	/* last device this IOMMU handles. read from PCI */
+	u16 last_device;
+
+	/* start of exclusion range of that IOMMU */
+	u64 exclusion_start;
+	/* length of exclusion range of that IOMMU */
+	u64 exclusion_length;
+
+	/* command buffer virtual address */
+	u8 *cmd_buf;
+	/* size of command buffer */
+	u32 cmd_buf_size;
+
+	/* event buffer virtual address */
+	u8 *evt_buf;
+	/* size of event buffer */
+	u32 evt_buf_size;
+	/* MSI number for event interrupt */
+	u16 evt_msi_num;
+
+	/* if one, we need to send a completion wait command */
+	int need_sync;
+
+	/* true if interrupts for this IOMMU are already enabled */
+	bool int_enabled;
+
+	/* default dma_ops domain for that IOMMU */
+	struct dma_ops_domain *default_dom;
+};
+
+/*
+ * List with all IOMMUs in the system. This list is not locked because it is
+ * only written and read at driver initialization or suspend time
+ */
+extern struct list_head amd_iommu_list;
+
+/*
+ * Structure defining one entry in the device table
+ */
+struct dev_table_entry {
+	u32 data[8];
+};
+
+/*
+ * One entry for unity mappings parsed out of the ACPI table.
+ */
+struct unity_map_entry {
+	struct list_head list;
+
+	/* starting device id this entry is used for (including) */
+	u16 devid_start;
+	/* end device id this entry is used for (including) */
+	u16 devid_end;
+
+	/* start address to unity map (including) */
+	u64 address_start;
+	/* end address to unity map (including) */
+	u64 address_end;
+
+	/* required protection */
+	int prot;
+};
+
+/*
+ * List of all unity mappings. It is not locked because as runtime it is only
+ * read. It is created at ACPI table parsing time.
+ */
+extern struct list_head amd_iommu_unity_map;
+
+/*
+ * Data structures for device handling
+ */
+
+/*
+ * Device table used by hardware. Read and write accesses by software are
+ * locked with the amd_iommu_pd_table lock.
+ */
+extern struct dev_table_entry *amd_iommu_dev_table;
+
+/*
+ * Alias table to find requestor ids to device ids. Not locked because only
+ * read on runtime.
+ */
+extern u16 *amd_iommu_alias_table;
+
+/*
+ * Reverse lookup table to find the IOMMU which translates a specific device.
+ */
+extern struct amd_iommu **amd_iommu_rlookup_table;
+
+/* size of the dma_ops aperture as power of 2 */
+extern unsigned amd_iommu_aperture_order;
+
+/* largest PCI device id we expect translation requests for */
+extern u16 amd_iommu_last_bdf;
+
+/* data structures for protection domain handling */
+extern struct protection_domain **amd_iommu_pd_table;
+
+/* allocation bitmap for domain ids */
+extern unsigned long *amd_iommu_pd_alloc_bitmap;
+
+/* will be 1 if device isolation is enabled */
+extern int amd_iommu_isolate;
+
+/*
+ * If true, the addresses will be flushed on unmap time, not when
+ * they are reused
+ */
+extern bool amd_iommu_unmap_flush;
+
+/* takes a PCI device id and prints it out in a readable form */
+static inline void print_devid(u16 devid, int nl)
+{
+	int bus = devid >> 8;
+	int dev = devid >> 3 & 0x1f;
+	int fn  = devid & 0x07;
+
+	printk("%02x:%02x.%x", bus, dev, fn);
+	if (nl)
+		printk("\n");
+}
+
+/* takes bus and device/function and returns the device id
+ * FIXME: should that be in generic PCI code? */
+static inline u16 calc_devid(u8 bus, u8 devfn)
+{
+	return (((u16)bus) << 8) | devfn;
+}
+
+#endif /* _ASM_X86_AMD_IOMMU_TYPES_H */
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
new file mode 100644
index 0000000..3b1510b
--- /dev/null
+++ b/arch/x86/include/asm/apic.h
@@ -0,0 +1,199 @@
+#ifndef _ASM_X86_APIC_H
+#define _ASM_X86_APIC_H
+
+#include <linux/pm.h>
+#include <linux/delay.h>
+
+#include <asm/alternative.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/cpufeature.h>
+#include <asm/msr.h>
+
+#define ARCH_APICTIMER_STOPS_ON_C3	1
+
+/*
+ * Debugging macros
+ */
+#define APIC_QUIET   0
+#define APIC_VERBOSE 1
+#define APIC_DEBUG   2
+
+/*
+ * Define the default level of output to be very little
+ * This can be turned up by using apic=verbose for more
+ * information and apic=debug for _lots_ of information.
+ * apic_verbosity is defined in apic.c
+ */
+#define apic_printk(v, s, a...) do {       \
+		if ((v) <= apic_verbosity) \
+			printk(s, ##a);    \
+	} while (0)
+
+
+extern void generic_apic_probe(void);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+extern unsigned int apic_verbosity;
+extern int local_apic_timer_c2_ok;
+
+extern int disable_apic;
+/*
+ * Basic functions accessing APICs.
+ */
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define setup_boot_clock setup_boot_APIC_clock
+#define setup_secondary_clock setup_secondary_APIC_clock
+#endif
+
+extern int is_vsmp_box(void);
+extern void xapic_wait_icr_idle(void);
+extern u32 safe_xapic_wait_icr_idle(void);
+extern u64 xapic_icr_read(void);
+extern void xapic_icr_write(u32, u32);
+extern int setup_profiling_timer(unsigned int);
+
+static inline void native_apic_mem_write(u32 reg, u32 v)
+{
+	volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg);
+
+	alternative_io("movl %0, %1", "xchgl %0, %1", X86_FEATURE_11AP,
+		       ASM_OUTPUT2("=r" (v), "=m" (*addr)),
+		       ASM_OUTPUT2("0" (v), "m" (*addr)));
+}
+
+static inline u32 native_apic_mem_read(u32 reg)
+{
+	return *((volatile u32 *)(APIC_BASE + reg));
+}
+
+static inline void native_apic_msr_write(u32 reg, u32 v)
+{
+	if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR ||
+	    reg == APIC_LVR)
+		return;
+
+	wrmsr(APIC_BASE_MSR + (reg >> 4), v, 0);
+}
+
+static inline u32 native_apic_msr_read(u32 reg)
+{
+	u32 low, high;
+
+	if (reg == APIC_DFR)
+		return -1;
+
+	rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
+	return low;
+}
+
+#ifndef CONFIG_X86_32
+extern int x2apic, x2apic_preenabled;
+extern void check_x2apic(void);
+extern void enable_x2apic(void);
+extern void enable_IR_x2apic(void);
+extern void x2apic_icr_write(u32 low, u32 id);
+static inline int x2apic_enabled(void)
+{
+	int msr, msr2;
+
+	if (!cpu_has_x2apic)
+		return 0;
+
+	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+	if (msr & X2APIC_ENABLE)
+		return 1;
+	return 0;
+}
+#else
+#define x2apic_enabled()	0
+#endif
+
+struct apic_ops {
+	u32 (*read)(u32 reg);
+	void (*write)(u32 reg, u32 v);
+	u64 (*icr_read)(void);
+	void (*icr_write)(u32 low, u32 high);
+	void (*wait_icr_idle)(void);
+	u32 (*safe_wait_icr_idle)(void);
+};
+
+extern struct apic_ops *apic_ops;
+
+#define apic_read (apic_ops->read)
+#define apic_write (apic_ops->write)
+#define apic_icr_read (apic_ops->icr_read)
+#define apic_icr_write (apic_ops->icr_write)
+#define apic_wait_icr_idle (apic_ops->wait_icr_idle)
+#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle)
+
+extern int get_physical_broadcast(void);
+
+#ifdef CONFIG_X86_64
+static inline void ack_x2APIC_irq(void)
+{
+	/* Docs say use 0 for future compatibility */
+	native_apic_msr_write(APIC_EOI, 0);
+}
+#endif
+
+
+static inline void ack_APIC_irq(void)
+{
+	/*
+	 * ack_APIC_irq() actually gets compiled as a single instruction
+	 * ... yummie.
+	 */
+
+	/* Docs say use 0 for future compatibility */
+	apic_write(APIC_EOI, 0);
+}
+
+extern int lapic_get_maxlvt(void);
+extern void clear_local_APIC(void);
+extern void connect_bsp_APIC(void);
+extern void disconnect_bsp_APIC(int virt_wire_setup);
+extern void disable_local_APIC(void);
+extern void lapic_shutdown(void);
+extern int verify_local_APIC(void);
+extern void cache_APIC_registers(void);
+extern void sync_Arb_IDs(void);
+extern void init_bsp_APIC(void);
+extern void setup_local_APIC(void);
+extern void end_local_APIC_setup(void);
+extern void init_apic_mappings(void);
+extern void setup_boot_APIC_clock(void);
+extern void setup_secondary_APIC_clock(void);
+extern int APIC_init_uniprocessor(void);
+extern void enable_NMI_through_LVT0(void);
+
+/*
+ * On 32bit this is mach-xxx local
+ */
+#ifdef CONFIG_X86_64
+extern void early_init_lapic_mapping(void);
+extern int apic_is_clustered_box(void);
+#else
+static inline int apic_is_clustered_box(void)
+{
+	return 0;
+}
+#endif
+
+extern u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask);
+extern u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask);
+
+
+#else /* !CONFIG_X86_LOCAL_APIC */
+static inline void lapic_shutdown(void) { }
+#define local_apic_timer_c2_ok		1
+static inline void init_apic_mappings(void) { }
+
+#endif /* !CONFIG_X86_LOCAL_APIC */
+
+#endif /* _ASM_X86_APIC_H */
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
new file mode 100644
index 0000000..63134e3
--- /dev/null
+++ b/arch/x86/include/asm/apicdef.h
@@ -0,0 +1,417 @@
+#ifndef _ASM_X86_APICDEF_H
+#define _ASM_X86_APICDEF_H
+
+/*
+ * Constants for various Intel APICs. (local APIC, IOAPIC, etc.)
+ *
+ * Alan Cox <Alan.Cox@linux.org>, 1995.
+ * Ingo Molnar <mingo@redhat.com>, 1999, 2000
+ */
+
+#define	APIC_DEFAULT_PHYS_BASE	0xfee00000
+
+#define	APIC_ID		0x20
+
+#define	APIC_LVR	0x30
+#define		APIC_LVR_MASK		0xFF00FF
+#define		GET_APIC_VERSION(x)	((x) & 0xFFu)
+#define		GET_APIC_MAXLVT(x)	(((x) >> 16) & 0xFFu)
+#ifdef CONFIG_X86_32
+#  define	APIC_INTEGRATED(x)	((x) & 0xF0u)
+#else
+#  define	APIC_INTEGRATED(x)	(1)
+#endif
+#define		APIC_XAPIC(x)		((x) >= 0x14)
+#define	APIC_TASKPRI	0x80
+#define		APIC_TPRI_MASK		0xFFu
+#define	APIC_ARBPRI	0x90
+#define		APIC_ARBPRI_MASK	0xFFu
+#define	APIC_PROCPRI	0xA0
+#define	APIC_EOI	0xB0
+#define		APIC_EIO_ACK		0x0
+#define	APIC_RRR	0xC0
+#define	APIC_LDR	0xD0
+#define		APIC_LDR_MASK		(0xFFu << 24)
+#define		GET_APIC_LOGICAL_ID(x)	(((x) >> 24) & 0xFFu)
+#define		SET_APIC_LOGICAL_ID(x)	(((x) << 24))
+#define		APIC_ALL_CPUS		0xFFu
+#define	APIC_DFR	0xE0
+#define		APIC_DFR_CLUSTER		0x0FFFFFFFul
+#define		APIC_DFR_FLAT			0xFFFFFFFFul
+#define	APIC_SPIV	0xF0
+#define		APIC_SPIV_FOCUS_DISABLED	(1 << 9)
+#define		APIC_SPIV_APIC_ENABLED		(1 << 8)
+#define	APIC_ISR	0x100
+#define	APIC_ISR_NR     0x8     /* Number of 32 bit ISR registers. */
+#define	APIC_TMR	0x180
+#define	APIC_IRR	0x200
+#define	APIC_ESR	0x280
+#define		APIC_ESR_SEND_CS	0x00001
+#define		APIC_ESR_RECV_CS	0x00002
+#define		APIC_ESR_SEND_ACC	0x00004
+#define		APIC_ESR_RECV_ACC	0x00008
+#define		APIC_ESR_SENDILL	0x00020
+#define		APIC_ESR_RECVILL	0x00040
+#define		APIC_ESR_ILLREGA	0x00080
+#define	APIC_ICR	0x300
+#define		APIC_DEST_SELF		0x40000
+#define		APIC_DEST_ALLINC	0x80000
+#define		APIC_DEST_ALLBUT	0xC0000
+#define		APIC_ICR_RR_MASK	0x30000
+#define		APIC_ICR_RR_INVALID	0x00000
+#define		APIC_ICR_RR_INPROG	0x10000
+#define		APIC_ICR_RR_VALID	0x20000
+#define		APIC_INT_LEVELTRIG	0x08000
+#define		APIC_INT_ASSERT		0x04000
+#define		APIC_ICR_BUSY		0x01000
+#define		APIC_DEST_LOGICAL	0x00800
+#define		APIC_DEST_PHYSICAL	0x00000
+#define		APIC_DM_FIXED		0x00000
+#define		APIC_DM_LOWEST		0x00100
+#define		APIC_DM_SMI		0x00200
+#define		APIC_DM_REMRD		0x00300
+#define		APIC_DM_NMI		0x00400
+#define		APIC_DM_INIT		0x00500
+#define		APIC_DM_STARTUP		0x00600
+#define		APIC_DM_EXTINT		0x00700
+#define		APIC_VECTOR_MASK	0x000FF
+#define	APIC_ICR2	0x310
+#define		GET_APIC_DEST_FIELD(x)	(((x) >> 24) & 0xFF)
+#define		SET_APIC_DEST_FIELD(x)	((x) << 24)
+#define	APIC_LVTT	0x320
+#define	APIC_LVTTHMR	0x330
+#define	APIC_LVTPC	0x340
+#define	APIC_LVT0	0x350
+#define		APIC_LVT_TIMER_BASE_MASK	(0x3 << 18)
+#define		GET_APIC_TIMER_BASE(x)		(((x) >> 18) & 0x3)
+#define		SET_APIC_TIMER_BASE(x)		(((x) << 18))
+#define		APIC_TIMER_BASE_CLKIN		0x0
+#define		APIC_TIMER_BASE_TMBASE		0x1
+#define		APIC_TIMER_BASE_DIV		0x2
+#define		APIC_LVT_TIMER_PERIODIC		(1 << 17)
+#define		APIC_LVT_MASKED			(1 << 16)
+#define		APIC_LVT_LEVEL_TRIGGER		(1 << 15)
+#define		APIC_LVT_REMOTE_IRR		(1 << 14)
+#define		APIC_INPUT_POLARITY		(1 << 13)
+#define		APIC_SEND_PENDING		(1 << 12)
+#define		APIC_MODE_MASK			0x700
+#define		GET_APIC_DELIVERY_MODE(x)	(((x) >> 8) & 0x7)
+#define		SET_APIC_DELIVERY_MODE(x, y)	(((x) & ~0x700) | ((y) << 8))
+#define			APIC_MODE_FIXED		0x0
+#define			APIC_MODE_NMI		0x4
+#define			APIC_MODE_EXTINT	0x7
+#define	APIC_LVT1	0x360
+#define	APIC_LVTERR	0x370
+#define	APIC_TMICT	0x380
+#define	APIC_TMCCT	0x390
+#define	APIC_TDCR	0x3E0
+#define APIC_SELF_IPI	0x3F0
+#define		APIC_TDR_DIV_TMBASE	(1 << 2)
+#define		APIC_TDR_DIV_1		0xB
+#define		APIC_TDR_DIV_2		0x0
+#define		APIC_TDR_DIV_4		0x1
+#define		APIC_TDR_DIV_8		0x2
+#define		APIC_TDR_DIV_16		0x3
+#define		APIC_TDR_DIV_32		0x8
+#define		APIC_TDR_DIV_64		0x9
+#define		APIC_TDR_DIV_128	0xA
+#define	APIC_EILVT0     0x500
+#define		APIC_EILVT_NR_AMD_K8	1	/* # of extended interrupts */
+#define		APIC_EILVT_NR_AMD_10H	4
+#define		APIC_EILVT_LVTOFF(x)	(((x) >> 4) & 0xF)
+#define		APIC_EILVT_MSG_FIX	0x0
+#define		APIC_EILVT_MSG_SMI	0x2
+#define		APIC_EILVT_MSG_NMI	0x4
+#define		APIC_EILVT_MSG_EXT	0x7
+#define		APIC_EILVT_MASKED	(1 << 16)
+#define	APIC_EILVT1     0x510
+#define	APIC_EILVT2     0x520
+#define	APIC_EILVT3     0x530
+
+#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
+#define APIC_BASE_MSR	0x800
+#define X2APIC_ENABLE	(1UL << 10)
+
+#ifdef CONFIG_X86_32
+# define MAX_IO_APICS 64
+#else
+# define MAX_IO_APICS 128
+# define MAX_LOCAL_APIC 32768
+#endif
+
+/*
+ * All x86-64 systems are xAPIC compatible.
+ * In the following, "apicid" is a physical APIC ID.
+ */
+#define XAPIC_DEST_CPUS_SHIFT	4
+#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+#define APIC_CLUSTER(apicid)	((apicid) & XAPIC_DEST_CLUSTER_MASK)
+#define APIC_CLUSTERID(apicid)	(APIC_CLUSTER(apicid) >> XAPIC_DEST_CPUS_SHIFT)
+#define APIC_CPUID(apicid)	((apicid) & XAPIC_DEST_CPUS_MASK)
+#define NUM_APIC_CLUSTERS	((BAD_APICID + 1) >> XAPIC_DEST_CPUS_SHIFT)
+
+/*
+ * the local APIC register structure, memory mapped. Not terribly well
+ * tested, but we might eventually use this one in the future - the
+ * problem why we cannot use it right now is the P5 APIC, it has an
+ * errata which cannot take 8-bit reads and writes, only 32-bit ones ...
+ */
+#define u32 unsigned int
+
+struct local_apic {
+
+/*000*/	struct { u32 __reserved[4]; } __reserved_01;
+
+/*010*/	struct { u32 __reserved[4]; } __reserved_02;
+
+/*020*/	struct { /* APIC ID Register */
+		u32   __reserved_1	: 24,
+			phys_apic_id	:  4,
+			__reserved_2	:  4;
+		u32 __reserved[3];
+	} id;
+
+/*030*/	const
+	struct { /* APIC Version Register */
+		u32   version		:  8,
+			__reserved_1	:  8,
+			max_lvt		:  8,
+			__reserved_2	:  8;
+		u32 __reserved[3];
+	} version;
+
+/*040*/	struct { u32 __reserved[4]; } __reserved_03;
+
+/*050*/	struct { u32 __reserved[4]; } __reserved_04;
+
+/*060*/	struct { u32 __reserved[4]; } __reserved_05;
+
+/*070*/	struct { u32 __reserved[4]; } __reserved_06;
+
+/*080*/	struct { /* Task Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} tpr;
+
+/*090*/	const
+	struct { /* Arbitration Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} apr;
+
+/*0A0*/	const
+	struct { /* Processor Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} ppr;
+
+/*0B0*/	struct { /* End Of Interrupt Register */
+		u32   eoi;
+		u32 __reserved[3];
+	} eoi;
+
+/*0C0*/	struct { u32 __reserved[4]; } __reserved_07;
+
+/*0D0*/	struct { /* Logical Destination Register */
+		u32   __reserved_1	: 24,
+			logical_dest	:  8;
+		u32 __reserved_2[3];
+	} ldr;
+
+/*0E0*/	struct { /* Destination Format Register */
+		u32   __reserved_1	: 28,
+			model		:  4;
+		u32 __reserved_2[3];
+	} dfr;
+
+/*0F0*/	struct { /* Spurious Interrupt Vector Register */
+		u32	spurious_vector	:  8,
+			apic_enabled	:  1,
+			focus_cpu	:  1,
+			__reserved_2	: 22;
+		u32 __reserved_3[3];
+	} svr;
+
+/*100*/	struct { /* In Service Register */
+/*170*/		u32 bitfield;
+		u32 __reserved[3];
+	} isr [8];
+
+/*180*/	struct { /* Trigger Mode Register */
+/*1F0*/		u32 bitfield;
+		u32 __reserved[3];
+	} tmr [8];
+
+/*200*/	struct { /* Interrupt Request Register */
+/*270*/		u32 bitfield;
+		u32 __reserved[3];
+	} irr [8];
+
+/*280*/	union { /* Error Status Register */
+		struct {
+			u32   send_cs_error			:  1,
+				receive_cs_error		:  1,
+				send_accept_error		:  1,
+				receive_accept_error		:  1,
+				__reserved_1			:  1,
+				send_illegal_vector		:  1,
+				receive_illegal_vector		:  1,
+				illegal_register_address	:  1,
+				__reserved_2			: 24;
+			u32 __reserved_3[3];
+		} error_bits;
+		struct {
+			u32 errors;
+			u32 __reserved_3[3];
+		} all_errors;
+	} esr;
+
+/*290*/	struct { u32 __reserved[4]; } __reserved_08;
+
+/*2A0*/	struct { u32 __reserved[4]; } __reserved_09;
+
+/*2B0*/	struct { u32 __reserved[4]; } __reserved_10;
+
+/*2C0*/	struct { u32 __reserved[4]; } __reserved_11;
+
+/*2D0*/	struct { u32 __reserved[4]; } __reserved_12;
+
+/*2E0*/	struct { u32 __reserved[4]; } __reserved_13;
+
+/*2F0*/	struct { u32 __reserved[4]; } __reserved_14;
+
+/*300*/	struct { /* Interrupt Command Register 1 */
+		u32   vector			:  8,
+			delivery_mode		:  3,
+			destination_mode	:  1,
+			delivery_status		:  1,
+			__reserved_1		:  1,
+			level			:  1,
+			trigger			:  1,
+			__reserved_2		:  2,
+			shorthand		:  2,
+			__reserved_3		:  12;
+		u32 __reserved_4[3];
+	} icr1;
+
+/*310*/	struct { /* Interrupt Command Register 2 */
+		union {
+			u32   __reserved_1	: 24,
+				phys_dest	:  4,
+				__reserved_2	:  4;
+			u32   __reserved_3	: 24,
+				logical_dest	:  8;
+		} dest;
+		u32 __reserved_4[3];
+	} icr2;
+
+/*320*/	struct { /* LVT - Timer */
+		u32   vector		:  8,
+			__reserved_1	:  4,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			timer_mode	:  1,
+			__reserved_3	: 14;
+		u32 __reserved_4[3];
+	} lvt_timer;
+
+/*330*/	struct { /* LVT - Thermal Sensor */
+		u32  vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_thermal;
+
+/*340*/	struct { /* LVT - Performance Counter */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_pc;
+
+/*350*/	struct { /* LVT - LINT0 */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			polarity	:  1,
+			remote_irr	:  1,
+			trigger		:  1,
+			mask		:  1,
+			__reserved_2	: 15;
+		u32 __reserved_3[3];
+	} lvt_lint0;
+
+/*360*/	struct { /* LVT - LINT1 */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			polarity	:  1,
+			remote_irr	:  1,
+			trigger		:  1,
+			mask		:  1,
+			__reserved_2	: 15;
+		u32 __reserved_3[3];
+	} lvt_lint1;
+
+/*370*/	struct { /* LVT - Error */
+		u32   vector		:  8,
+			__reserved_1	:  4,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_error;
+
+/*380*/	struct { /* Timer Initial Count Register */
+		u32   initial_count;
+		u32 __reserved_2[3];
+	} timer_icr;
+
+/*390*/	const
+	struct { /* Timer Current Count Register */
+		u32   curr_count;
+		u32 __reserved_2[3];
+	} timer_ccr;
+
+/*3A0*/	struct { u32 __reserved[4]; } __reserved_16;
+
+/*3B0*/	struct { u32 __reserved[4]; } __reserved_17;
+
+/*3C0*/	struct { u32 __reserved[4]; } __reserved_18;
+
+/*3D0*/	struct { u32 __reserved[4]; } __reserved_19;
+
+/*3E0*/	struct { /* Timer Divide Configuration Register */
+		u32   divisor		:  4,
+			__reserved_1	: 28;
+		u32 __reserved_2[3];
+	} timer_dcr;
+
+/*3F0*/	struct { u32 __reserved[4]; } __reserved_20;
+
+} __attribute__ ((packed));
+
+#undef u32
+
+#ifdef CONFIG_X86_32
+ #define BAD_APICID 0xFFu
+#else
+ #define BAD_APICID 0xFFFFu
+#endif
+#endif /* _ASM_X86_APICDEF_H */
diff --git a/arch/x86/include/asm/arch_hooks.h b/arch/x86/include/asm/arch_hooks.h
new file mode 100644
index 0000000..cbd4957
--- /dev/null
+++ b/arch/x86/include/asm/arch_hooks.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_X86_ARCH_HOOKS_H
+#define _ASM_X86_ARCH_HOOKS_H
+
+#include <linux/interrupt.h>
+
+/*
+ *	linux/include/asm/arch_hooks.h
+ *
+ *	define the architecture specific hooks
+ */
+
+/* these aren't arch hooks, they are generic routines
+ * that can be used by the hooks */
+extern void init_ISA_irqs(void);
+extern irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+/* these are the defined hooks */
+extern void intr_init_hook(void);
+extern void pre_intr_init_hook(void);
+extern void pre_setup_arch_hook(void);
+extern void trap_init_hook(void);
+extern void pre_time_init_hook(void);
+extern void time_init_hook(void);
+extern void mca_nmi_hook(void);
+
+#endif /* _ASM_X86_ARCH_HOOKS_H */
diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h
new file mode 100644
index 0000000..56be78f
--- /dev/null
+++ b/arch/x86/include/asm/asm.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_X86_ASM_H
+#define _ASM_X86_ASM_H
+
+#ifdef __ASSEMBLY__
+# define __ASM_FORM(x)	x
+# define __ASM_EX_SEC	.section __ex_table
+#else
+# define __ASM_FORM(x)	" " #x " "
+# define __ASM_EX_SEC	" .section __ex_table,\"a\"\n"
+#endif
+
+#ifdef CONFIG_X86_32
+# define __ASM_SEL(a,b) __ASM_FORM(a)
+#else
+# define __ASM_SEL(a,b) __ASM_FORM(b)
+#endif
+
+#define __ASM_SIZE(inst)	__ASM_SEL(inst##l, inst##q)
+#define __ASM_REG(reg)		__ASM_SEL(e##reg, r##reg)
+
+#define _ASM_PTR	__ASM_SEL(.long, .quad)
+#define _ASM_ALIGN	__ASM_SEL(.balign 4, .balign 8)
+
+#define _ASM_MOV	__ASM_SIZE(mov)
+#define _ASM_INC	__ASM_SIZE(inc)
+#define _ASM_DEC	__ASM_SIZE(dec)
+#define _ASM_ADD	__ASM_SIZE(add)
+#define _ASM_SUB	__ASM_SIZE(sub)
+#define _ASM_XADD	__ASM_SIZE(xadd)
+
+#define _ASM_AX		__ASM_REG(ax)
+#define _ASM_BX		__ASM_REG(bx)
+#define _ASM_CX		__ASM_REG(cx)
+#define _ASM_DX		__ASM_REG(dx)
+#define _ASM_SP		__ASM_REG(sp)
+#define _ASM_BP		__ASM_REG(bp)
+#define _ASM_SI		__ASM_REG(si)
+#define _ASM_DI		__ASM_REG(di)
+
+/* Exception table entry */
+# define _ASM_EXTABLE(from,to) \
+	__ASM_EX_SEC	\
+	_ASM_ALIGN "\n" \
+	_ASM_PTR #from "," #to "\n" \
+	" .previous\n"
+
+#endif /* _ASM_X86_ASM_H */
diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h
new file mode 100644
index 0000000..4e1b887
--- /dev/null
+++ b/arch/x86/include/asm/atomic.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "atomic_32.h"
+#else
+# include "atomic_64.h"
+#endif
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
new file mode 100644
index 0000000..ad5b9f6
--- /dev/null
+++ b/arch/x86/include/asm/atomic_32.h
@@ -0,0 +1,259 @@
+#ifndef _ASM_X86_ATOMIC_32_H
+#define _ASM_X86_ATOMIC_32_H
+
+#include <linux/compiler.h>
+#include <asm/processor.h>
+#include <asm/cmpxchg.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct {
+	int counter;
+} atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v)		((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v, i)	(((v)->counter) = (i))
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "addl %1,%0"
+		     : "+m" (v->counter)
+		     : "ir" (i));
+}
+
+/**
+ * atomic_sub - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "subl %1,%0"
+		     : "+m" (v->counter)
+		     : "ir" (i));
+}
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic_sub_and_test(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : "ir" (i) : "memory");
+	return c;
+}
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+static inline void atomic_inc(atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "incl %0"
+		     : "+m" (v->counter));
+}
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+static inline void atomic_dec(atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "decl %0"
+		     : "+m" (v->counter));
+}
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "decl %0; sete %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic_inc_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "incl %0; sete %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : "ir" (i) : "memory");
+	return c;
+}
+
+/**
+ * atomic_add_return - add integer and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	int __i;
+#ifdef CONFIG_M386
+	unsigned long flags;
+	if (unlikely(boot_cpu_data.x86 <= 3))
+		goto no_xadd;
+#endif
+	/* Modern 486+ processor */
+	__i = i;
+	asm volatile(LOCK_PREFIX "xaddl %0, %1"
+		     : "+r" (i), "+m" (v->counter)
+		     : : "memory");
+	return i + __i;
+
+#ifdef CONFIG_M386
+no_xadd: /* Legacy 386 processor */
+	local_irq_save(flags);
+	__i = atomic_read(v);
+	atomic_set(v, i + __i);
+	local_irq_restore(flags);
+	return i + __i;
+#endif
+}
+
+/**
+ * atomic_sub_return - subtract integer and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to subtract
+ *
+ * Atomically subtracts @i from @v and returns @v - @i
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	return atomic_add_return(-i, v);
+}
+
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+/**
+ * atomic_add_unless - add unless the number is already a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as @v was not already @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_inc_return(v)  (atomic_add_return(1, v))
+#define atomic_dec_return(v)  (atomic_sub_return(1, v))
+
+/* These are x86-specific, used by some header files */
+#define atomic_clear_mask(mask, addr)				\
+	asm volatile(LOCK_PREFIX "andl %0,%1"			\
+		     : : "r" (~(mask)), "m" (*(addr)) : "memory")
+
+#define atomic_set_mask(mask, addr)				\
+	asm volatile(LOCK_PREFIX "orl %0,%1"				\
+		     : : "r" (mask), "m" (*(addr)) : "memory")
+
+/* Atomic operations are already serializing on x86 */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
new file mode 100644
index 0000000..279d2a7
--- /dev/null
+++ b/arch/x86/include/asm/atomic_64.h
@@ -0,0 +1,473 @@
+#ifndef _ASM_X86_ATOMIC_64_H
+#define _ASM_X86_ATOMIC_64_H
+
+#include <asm/alternative.h>
+#include <asm/cmpxchg.h>
+
+/* atomic_t should be 32 bit signed type */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct {
+	int counter;
+} atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v)		((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v, i)		(((v)->counter) = (i))
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "addl %1,%0"
+		     : "=m" (v->counter)
+		     : "ir" (i), "m" (v->counter));
+}
+
+/**
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "subl %1,%0"
+		     : "=m" (v->counter)
+		     : "ir" (i), "m" (v->counter));
+}
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic_sub_and_test(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "ir" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+static inline void atomic_inc(atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "incl %0"
+		     : "=m" (v->counter)
+		     : "m" (v->counter));
+}
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+static inline void atomic_dec(atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "decl %0"
+		     : "=m" (v->counter)
+		     : "m" (v->counter));
+}
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "decl %0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic_inc_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "incl %0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "ir" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic_add_return - add and return
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	int __i = i;
+	asm volatile(LOCK_PREFIX "xaddl %0, %1"
+		     : "+r" (i), "+m" (v->counter)
+		     : : "memory");
+	return i + __i;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	return atomic_add_return(-i, v);
+}
+
+#define atomic_inc_return(v)  (atomic_add_return(1, v))
+#define atomic_dec_return(v)  (atomic_sub_return(1, v))
+
+/* An 64bit atomic type */
+
+typedef struct {
+	long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+/**
+ * atomic64_read - read atomic64 variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically reads the value of @v.
+ * Doesn't imply a read memory barrier.
+ */
+#define atomic64_read(v)		((v)->counter)
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @v: pointer to type atomic64_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic64_set(v, i)		(((v)->counter) = (i))
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic64_add(long i, atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "addq %1,%0"
+		     : "=m" (v->counter)
+		     : "er" (i), "m" (v->counter));
+}
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static inline void atomic64_sub(long i, atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "subq %1,%0"
+		     : "=m" (v->counter)
+		     : "er" (i), "m" (v->counter));
+}
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic64_sub_and_test(long i, atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "er" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically increments @v by 1.
+ */
+static inline void atomic64_inc(atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "incq %0"
+		     : "=m" (v->counter)
+		     : "m" (v->counter));
+}
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically decrements @v by 1.
+ */
+static inline void atomic64_dec(atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "decq %0"
+		     : "=m" (v->counter)
+		     : "m" (v->counter));
+}
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic64_dec_and_test(atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "decq %0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic64_inc_and_test(atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "incq %0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int atomic64_add_negative(long i, atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "er" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic64_add_return - add and return
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline long atomic64_add_return(long i, atomic64_t *v)
+{
+	long __i = i;
+	asm volatile(LOCK_PREFIX "xaddq %0, %1;"
+		     : "+r" (i), "+m" (v->counter)
+		     : : "memory");
+	return i + __i;
+}
+
+static inline long atomic64_sub_return(long i, atomic64_t *v)
+{
+	return atomic64_add_return(-i, v);
+}
+
+#define atomic64_inc_return(v)  (atomic64_add_return(1, (v)))
+#define atomic64_dec_return(v)  (atomic64_sub_return(1, (v)))
+
+#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+/**
+ * atomic_inc_short - increment of a short integer
+ * @v: pointer to type int
+ *
+ * Atomically adds 1 to @v
+ * Returns the new value of @u
+ */
+static inline short int atomic_inc_short(short int *v)
+{
+	asm(LOCK_PREFIX "addw $1, %0" : "+m" (*v));
+	return *v;
+}
+
+/**
+ * atomic_or_long - OR of two long integers
+ * @v1: pointer to type unsigned long
+ * @v2: pointer to type unsigned long
+ *
+ * Atomically ORs @v1 and @v2
+ * Returns the result of the OR
+ */
+static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
+{
+	asm(LOCK_PREFIX "orq %1, %0" : "+m" (*v1) : "r" (v2));
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+/* These are x86-specific, used by some header files */
+#define atomic_clear_mask(mask, addr)					\
+	asm volatile(LOCK_PREFIX "andl %0,%1"				\
+		     : : "r" (~(mask)), "m" (*(addr)) : "memory")
+
+#define atomic_set_mask(mask, addr)					\
+	asm volatile(LOCK_PREFIX "orl %0,%1"				\
+		     : : "r" ((unsigned)(mask)), "m" (*(addr))		\
+		     : "memory")
+
+/* Atomic operations are already serializing on x86 */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* _ASM_X86_ATOMIC_64_H */
diff --git a/arch/x86/include/asm/auxvec.h b/arch/x86/include/asm/auxvec.h
new file mode 100644
index 0000000..1316b4c
--- /dev/null
+++ b/arch/x86/include/asm/auxvec.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_AUXVEC_H
+#define _ASM_X86_AUXVEC_H
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them, start the x86-specific ones at 32.
+ */
+#ifdef __i386__
+#define AT_SYSINFO		32
+#endif
+#define AT_SYSINFO_EHDR		33
+
+#endif /* _ASM_X86_AUXVEC_H */
diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
new file mode 100644
index 0000000..1d9543b
--- /dev/null
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -0,0 +1,139 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+	return (1);
+}
+
+static inline cpumask_t target_cpus(void)
+{
+#ifdef CONFIG_SMP
+        return cpu_online_map;
+#else
+        return cpumask_of_cpu(0);
+#endif
+}
+
+#undef APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL	0
+#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
+#define INT_DELIVERY_MODE	(dest_Fixed)
+#define INT_DEST_MODE		(0)    /* phys delivery to target proc */
+#define NO_BALANCE_IRQ		(0)
+#define WAKE_SECONDARY_VIA_INIT
+
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return (0);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+	return (1);
+}
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+	unsigned long val, id;
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	id = xapic_phys_to_log_apicid(cpu);
+	val |= SET_APIC_LOGICAL_ID(id);
+	return val;
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+static inline void setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		"Physflat", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return (0);
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+	return apicid_2_node[hard_smp_processor_id()];
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < NR_CPUS)
+		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+
+	return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+	if (cpu >= NR_CPUS)
+		return BAD_APICID;
+	return cpu_physical_id(cpu);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xFFL);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return (1);
+}
+
+/* As we are using single CPU as destination, pick only one CPU here */
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+	int apicid;	
+
+	cpu = first_cpu(cpumask);
+	apicid = cpu_to_logical_apicid(cpu);
+	return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/arch/x86/include/asm/bigsmp/apicdef.h b/arch/x86/include/asm/bigsmp/apicdef.h
new file mode 100644
index 0000000..392c3f5
--- /dev/null
+++ b/arch/x86/include/asm/bigsmp/apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define		APIC_ID_MASK		(0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+	return (((x)>>24)&0xFF);
+}
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/arch/x86/include/asm/bigsmp/ipi.h b/arch/x86/include/asm/bigsmp/ipi.h
new file mode 100644
index 0000000..9404c53
--- /dev/null
+++ b/arch/x86/include/asm/bigsmp/ipi.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */
diff --git a/arch/x86/include/asm/bios_ebda.h b/arch/x86/include/asm/bios_ebda.h
new file mode 100644
index 0000000..3c75210
--- /dev/null
+++ b/arch/x86/include/asm/bios_ebda.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_X86_BIOS_EBDA_H
+#define _ASM_X86_BIOS_EBDA_H
+
+#include <asm/io.h>
+
+/*
+ * there is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E.
+ */
+static inline unsigned int get_bios_ebda(void)
+{
+	unsigned int address = *(unsigned short *)phys_to_virt(0x40E);
+	address <<= 4;
+	return address;	/* 0 means none */
+}
+
+void reserve_ebda_region(void);
+
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+/*
+ * This is obviously not a great place for this, but we want to be
+ * able to scatter it around anywhere in the kernel.
+ */
+void check_for_bios_corruption(void);
+void start_periodic_check_for_corruption(void);
+#else
+static inline void check_for_bios_corruption(void)
+{
+}
+
+static inline void start_periodic_check_for_corruption(void)
+{
+}
+#endif
+
+#endif /* _ASM_X86_BIOS_EBDA_H */
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
new file mode 100644
index 0000000..3600103
--- /dev/null
+++ b/arch/x86/include/asm/bitops.h
@@ -0,0 +1,451 @@
+#ifndef _ASM_X86_BITOPS_H
+#define _ASM_X86_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/alternative.h>
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1)
+/* Technically wrong, but this avoids compilation errors on some gcc
+   versions. */
+#define BITOP_ADDR(x) "=m" (*(volatile long *) (x))
+#else
+#define BITOP_ADDR(x) "+m" (*(volatile long *) (x))
+#endif
+
+#define ADDR				BITOP_ADDR(addr)
+
+/*
+ * We do the locked ops that don't return the old value as
+ * a mask operation on a byte.
+ */
+#define IS_IMMEDIATE(nr)		(__builtin_constant_p(nr))
+#define CONST_MASK_ADDR(nr, addr)	BITOP_ADDR((void *)(addr) + ((nr)>>3))
+#define CONST_MASK(nr)			(1 << ((nr) & 7))
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note: there are no guarantees that this function will not be reordered
+ * on non x86 architectures, so if you are writing portable code,
+ * make sure not to rely on its reordering guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(unsigned int nr, volatile unsigned long *addr)
+{
+	if (IS_IMMEDIATE(nr)) {
+		asm volatile(LOCK_PREFIX "orb %1,%0"
+			: CONST_MASK_ADDR(nr, addr)
+			: "iq" ((u8)CONST_MASK(nr))
+			: "memory");
+	} else {
+		asm volatile(LOCK_PREFIX "bts %1,%0"
+			: BITOP_ADDR(addr) : "Ir" (nr) : "memory");
+	}
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __set_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory");
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+	if (IS_IMMEDIATE(nr)) {
+		asm volatile(LOCK_PREFIX "andb %1,%0"
+			: CONST_MASK_ADDR(nr, addr)
+			: "iq" ((u8)~CONST_MASK(nr)));
+	} else {
+		asm volatile(LOCK_PREFIX "btr %1,%0"
+			: BITOP_ADDR(addr)
+			: "Ir" (nr));
+	}
+}
+
+/*
+ * clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock.
+ */
+static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
+{
+	barrier();
+	clear_bit(nr, addr);
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
+}
+
+/*
+ * __clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * __clear_bit() is non-atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock if no other CPUs can concurrently
+ * modify other bits in the word.
+ *
+ * No memory barrier is required here, because x86 cannot reorder stores past
+ * older loads. Same principle as spin_unlock.
+ */
+static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
+{
+	barrier();
+	__clear_bit(nr, addr);
+}
+
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __change_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile(LOCK_PREFIX "bts %2,%1\n\t"
+		     "sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
+
+	return oldbit;
+}
+
+/**
+ * test_and_set_bit_lock - Set a bit and return its old value for lock
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This is the same as test_and_set_bit on x86.
+ */
+static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
+{
+	return test_and_set_bit(nr, addr);
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm("bts %2,%1\n\t"
+	    "sbb %0,%0"
+	    : "=r" (oldbit), ADDR
+	    : "Ir" (nr));
+	return oldbit;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile(LOCK_PREFIX "btr %2,%1\n\t"
+		     "sbb %0,%0"
+		     : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
+
+	return oldbit;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("btr %2,%1\n\t"
+		     "sbb %0,%0"
+		     : "=r" (oldbit), ADDR
+		     : "Ir" (nr));
+	return oldbit;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("btc %2,%1\n\t"
+		     "sbb %0,%0"
+		     : "=r" (oldbit), ADDR
+		     : "Ir" (nr) : "memory");
+
+	return oldbit;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile(LOCK_PREFIX "btc %2,%1\n\t"
+		     "sbb %0,%0"
+		     : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
+
+	return oldbit;
+}
+
+static inline int constant_test_bit(int nr, const volatile unsigned long *addr)
+{
+	return ((1UL << (nr % BITS_PER_LONG)) &
+		(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
+}
+
+static inline int variable_test_bit(int nr, volatile const unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("bt %2,%1\n\t"
+		     "sbb %0,%0"
+		     : "=r" (oldbit)
+		     : "m" (*(unsigned long *)addr), "Ir" (nr));
+
+	return oldbit;
+}
+
+#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static int test_bit(int nr, const volatile unsigned long *addr);
+#endif
+
+#define test_bit(nr, addr)			\
+	(__builtin_constant_p((nr))		\
+	 ? constant_test_bit((nr), (addr))	\
+	 : variable_test_bit((nr), (addr)))
+
+/**
+ * __ffs - find first set bit in word
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	asm("bsf %1,%0"
+		: "=r" (word)
+		: "rm" (word));
+	return word;
+}
+
+/**
+ * ffz - find first zero bit in word
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	asm("bsf %1,%0"
+		: "=r" (word)
+		: "r" (~word));
+	return word;
+}
+
+/*
+ * __fls: find last set bit in word
+ * @word: The word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+	asm("bsr %1,%0"
+	    : "=r" (word)
+	    : "rm" (word));
+	return word;
+}
+
+#ifdef __KERNEL__
+/**
+ * ffs - find first set bit in word
+ * @x: the word to search
+ *
+ * This is defined the same way as the libc and compiler builtin ffs
+ * routines, therefore differs in spirit from the other bitops.
+ *
+ * ffs(value) returns 0 if value is 0 or the position of the first
+ * set bit if value is nonzero. The first (least significant) bit
+ * is at position 1.
+ */
+static inline int ffs(int x)
+{
+	int r;
+#ifdef CONFIG_X86_CMOV
+	asm("bsfl %1,%0\n\t"
+	    "cmovzl %2,%0"
+	    : "=r" (r) : "rm" (x), "r" (-1));
+#else
+	asm("bsfl %1,%0\n\t"
+	    "jnz 1f\n\t"
+	    "movl $-1,%0\n"
+	    "1:" : "=r" (r) : "rm" (x));
+#endif
+	return r + 1;
+}
+
+/**
+ * fls - find last set bit in word
+ * @x: the word to search
+ *
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffs, but returns the position of the most significant set bit.
+ *
+ * fls(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 32.
+ */
+static inline int fls(int x)
+{
+	int r;
+#ifdef CONFIG_X86_CMOV
+	asm("bsrl %1,%0\n\t"
+	    "cmovzl %2,%0"
+	    : "=&r" (r) : "rm" (x), "rm" (-1));
+#else
+	asm("bsrl %1,%0\n\t"
+	    "jnz 1f\n\t"
+	    "movl $-1,%0\n"
+	    "1:" : "=r" (r) : "rm" (x));
+#endif
+	return r + 1;
+}
+#endif /* __KERNEL__ */
+
+#undef ADDR
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+
+#define ARCH_HAS_FAST_MULTIPLIER 1
+
+#include <asm-generic/bitops/hweight.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls64.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(lock, nr, addr)			\
+	test_and_set_bit((nr), (unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock, nr, addr)			\
+	test_and_clear_bit((nr), (unsigned long *)(addr))
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_X86_BITOPS_H */
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
new file mode 100644
index 0000000..dd61616
--- /dev/null
+++ b/arch/x86/include/asm/boot.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_X86_BOOT_H
+#define _ASM_X86_BOOT_H
+
+/* Don't touch these, unless you really know what you're doing. */
+#define DEF_SYSSEG	0x1000
+#define DEF_SYSSIZE	0x7F00
+
+/* Internal svga startup constants */
+#define NORMAL_VGA	0xffff		/* 80x25 mode */
+#define EXTENDED_VGA	0xfffe		/* 80x50 mode */
+#define ASK_VGA		0xfffd		/* ask for it at bootup */
+
+/* Physical address where kernel should be loaded. */
+#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
+				+ (CONFIG_PHYSICAL_ALIGN - 1)) \
+				& ~(CONFIG_PHYSICAL_ALIGN - 1))
+
+#ifdef CONFIG_X86_64
+#define BOOT_HEAP_SIZE	0x7000
+#define BOOT_STACK_SIZE	0x4000
+#else
+#define BOOT_HEAP_SIZE	0x4000
+#define BOOT_STACK_SIZE	0x1000
+#endif
+
+#endif /* _ASM_X86_BOOT_H */
diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
new file mode 100644
index 0000000..433adae
--- /dev/null
+++ b/arch/x86/include/asm/bootparam.h
@@ -0,0 +1,111 @@
+#ifndef _ASM_X86_BOOTPARAM_H
+#define _ASM_X86_BOOTPARAM_H
+
+#include <linux/types.h>
+#include <linux/screen_info.h>
+#include <linux/apm_bios.h>
+#include <linux/edd.h>
+#include <asm/e820.h>
+#include <asm/ist.h>
+#include <video/edid.h>
+
+/* setup data types */
+#define SETUP_NONE			0
+#define SETUP_E820_EXT			1
+
+/* extensible setup data list node */
+struct setup_data {
+	__u64 next;
+	__u32 type;
+	__u32 len;
+	__u8 data[0];
+};
+
+struct setup_header {
+	__u8	setup_sects;
+	__u16	root_flags;
+	__u32	syssize;
+	__u16	ram_size;
+#define RAMDISK_IMAGE_START_MASK	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000
+	__u16	vid_mode;
+	__u16	root_dev;
+	__u16	boot_flag;
+	__u16	jump;
+	__u32	header;
+	__u16	version;
+	__u32	realmode_swtch;
+	__u16	start_sys;
+	__u16	kernel_version;
+	__u8	type_of_loader;
+	__u8	loadflags;
+#define LOADED_HIGH	(1<<0)
+#define QUIET_FLAG	(1<<5)
+#define KEEP_SEGMENTS	(1<<6)
+#define CAN_USE_HEAP	(1<<7)
+	__u16	setup_move_size;
+	__u32	code32_start;
+	__u32	ramdisk_image;
+	__u32	ramdisk_size;
+	__u32	bootsect_kludge;
+	__u16	heap_end_ptr;
+	__u16	_pad1;
+	__u32	cmd_line_ptr;
+	__u32	initrd_addr_max;
+	__u32	kernel_alignment;
+	__u8	relocatable_kernel;
+	__u8	_pad2[3];
+	__u32	cmdline_size;
+	__u32	hardware_subarch;
+	__u64	hardware_subarch_data;
+	__u32	payload_offset;
+	__u32	payload_length;
+	__u64	setup_data;
+} __attribute__((packed));
+
+struct sys_desc_table {
+	__u16 length;
+	__u8  table[14];
+};
+
+struct efi_info {
+	__u32 efi_loader_signature;
+	__u32 efi_systab;
+	__u32 efi_memdesc_size;
+	__u32 efi_memdesc_version;
+	__u32 efi_memmap;
+	__u32 efi_memmap_size;
+	__u32 efi_systab_hi;
+	__u32 efi_memmap_hi;
+};
+
+/* The so-called "zeropage" */
+struct boot_params {
+	struct screen_info screen_info;			/* 0x000 */
+	struct apm_bios_info apm_bios_info;		/* 0x040 */
+	__u8  _pad2[12];				/* 0x054 */
+	struct ist_info ist_info;			/* 0x060 */
+	__u8  _pad3[16];				/* 0x070 */
+	__u8  hd0_info[16];	/* obsolete! */		/* 0x080 */
+	__u8  hd1_info[16];	/* obsolete! */		/* 0x090 */
+	struct sys_desc_table sys_desc_table;		/* 0x0a0 */
+	__u8  _pad4[144];				/* 0x0b0 */
+	struct edid_info edid_info;			/* 0x140 */
+	struct efi_info efi_info;			/* 0x1c0 */
+	__u32 alt_mem_k;				/* 0x1e0 */
+	__u32 scratch;		/* Scratch field! */	/* 0x1e4 */
+	__u8  e820_entries;				/* 0x1e8 */
+	__u8  eddbuf_entries;				/* 0x1e9 */
+	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
+	__u8  _pad6[6];					/* 0x1eb */
+	struct setup_header hdr;    /* setup header */	/* 0x1f1 */
+	__u8  _pad7[0x290-0x1f1-sizeof(struct setup_header)];
+	__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX];	/* 0x290 */
+	struct e820entry e820_map[E820MAX];		/* 0x2d0 */
+	__u8  _pad8[48];				/* 0xcd0 */
+	struct edd_info eddbuf[EDDMAXNR];		/* 0xd00 */
+	__u8  _pad9[276];				/* 0xeec */
+} __attribute__((packed));
+
+#endif /* _ASM_X86_BOOTPARAM_H */
diff --git a/arch/x86/include/asm/bug.h b/arch/x86/include/asm/bug.h
new file mode 100644
index 0000000..3def206
--- /dev/null
+++ b/arch/x86/include/asm/bug.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_X86_BUG_H
+#define _ASM_X86_BUG_H
+
+#ifdef CONFIG_BUG
+#define HAVE_ARCH_BUG
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#ifdef CONFIG_X86_32
+# define __BUG_C0	"2:\t.long 1b, %c0\n"
+#else
+# define __BUG_C0	"2:\t.quad 1b, %c0\n"
+#endif
+
+#define BUG()							\
+do {								\
+	asm volatile("1:\tud2\n"				\
+		     ".pushsection __bug_table,\"a\"\n"		\
+		     __BUG_C0					\
+		     "\t.word %c1, 0\n"				\
+		     "\t.org 2b+%c2\n"				\
+		     ".popsection"				\
+		     : : "i" (__FILE__), "i" (__LINE__),	\
+		     "i" (sizeof(struct bug_entry)));		\
+	for (;;) ;						\
+} while (0)
+
+#else
+#define BUG()							\
+do {								\
+	asm volatile("ud2");					\
+	for (;;) ;						\
+} while (0)
+#endif
+
+#endif /* !CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+#endif /* _ASM_X86_BUG_H */
diff --git a/arch/x86/include/asm/bugs.h b/arch/x86/include/asm/bugs.h
new file mode 100644
index 0000000..08abf63
--- /dev/null
+++ b/arch/x86/include/asm/bugs.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_BUGS_H
+#define _ASM_X86_BUGS_H
+
+extern void check_bugs(void);
+
+#if defined(CONFIG_CPU_SUP_INTEL) && defined(CONFIG_X86_32)
+int ppro_with_ram_bug(void);
+#else
+static inline int ppro_with_ram_bug(void) { return 0; }
+#endif
+
+#endif /* _ASM_X86_BUGS_H */
diff --git a/arch/x86/include/asm/byteorder.h b/arch/x86/include/asm/byteorder.h
new file mode 100644
index 0000000..e02ae2d8
--- /dev/null
+++ b/arch/x86/include/asm/byteorder.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_X86_BYTEORDER_H
+#define _ASM_X86_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+#ifdef __i386__
+
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+#ifdef CONFIG_X86_BSWAP
+	asm("bswap %0" : "=r" (x) : "0" (x));
+#else
+	asm("xchgb %b0,%h0\n\t"	/* swap lower bytes	*/
+	    "rorl $16,%0\n\t"	/* swap words		*/
+	    "xchgb %b0,%h0"	/* swap higher bytes	*/
+	    : "=q" (x)
+	    : "0" (x));
+#endif
+	return x;
+}
+
+static inline __attribute_const__ __u64 ___arch__swab64(__u64 val)
+{
+	union {
+		struct {
+			__u32 a;
+			__u32 b;
+		} s;
+		__u64 u;
+	} v;
+	v.u = val;
+#ifdef CONFIG_X86_BSWAP
+	asm("bswapl %0 ; bswapl %1 ; xchgl %0,%1"
+	    : "=r" (v.s.a), "=r" (v.s.b)
+	    : "0" (v.s.a), "1" (v.s.b));
+#else
+	v.s.a = ___arch__swab32(v.s.a);
+	v.s.b = ___arch__swab32(v.s.b);
+	asm("xchgl %0,%1"
+	    : "=r" (v.s.a), "=r" (v.s.b)
+	    : "0" (v.s.a), "1" (v.s.b));
+#endif
+	return v.u;
+}
+
+#else /* __i386__ */
+
+static inline __attribute_const__ __u64 ___arch__swab64(__u64 x)
+{
+	asm("bswapq %0"
+	    : "=r" (x)
+	    : "0" (x));
+	return x;
+}
+
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	asm("bswapl %0"
+	    : "=r" (x)
+	    : "0" (x));
+	return x;
+}
+
+#endif
+
+/* Do not define swab16.  Gcc is smart enough to recognize "C" version and
+   convert it into rotation or exhange.  */
+
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#define __BYTEORDER_HAS_U64__
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_X86_BYTEORDER_H */
diff --git a/arch/x86/include/asm/cache.h b/arch/x86/include/asm/cache.h
new file mode 100644
index 0000000..5d367ca
--- /dev/null
+++ b/arch/x86/include/asm/cache.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_CACHE_H
+#define _ASM_X86_CACHE_H
+
+/* L1 cache line size */
+#define L1_CACHE_SHIFT	(CONFIG_X86_L1_CACHE_SHIFT)
+#define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#ifdef CONFIG_X86_VSMP
+/* vSMP Internode cacheline shift */
+#define INTERNODE_CACHE_SHIFT (12)
+#ifdef CONFIG_SMP
+#define __cacheline_aligned_in_smp					\
+	__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT))))	\
+	__attribute__((__section__(".data.page_aligned")))
+#endif
+#endif
+
+#endif /* _ASM_X86_CACHE_H */
diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
new file mode 100644
index 0000000..2f84665
--- /dev/null
+++ b/arch/x86/include/asm/cacheflush.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_X86_CACHEFLUSH_H
+#define _ASM_X86_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/* Caches aren't brain-dead on the intel. */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma, pg)		do { } while (0)
+#define flush_icache_user_range(vma, pg, adr, len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
+	memcpy((dst), (src), (len))
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
+	memcpy((dst), (src), (len))
+
+#define PG_non_WB				PG_arch_1
+PAGEFLAG(NonWB, non_WB)
+
+/*
+ * The set_memory_* API can be used to change various attributes of a virtual
+ * address range. The attributes include:
+ * Cachability   : UnCached, WriteCombining, WriteBack
+ * Executability : eXeutable, NoteXecutable
+ * Read/Write    : ReadOnly, ReadWrite
+ * Presence      : NotPresent
+ *
+ * Within a catagory, the attributes are mutually exclusive.
+ *
+ * The implementation of this API will take care of various aspects that
+ * are associated with changing such attributes, such as:
+ * - Flushing TLBs
+ * - Flushing CPU caches
+ * - Making sure aliases of the memory behind the mapping don't violate
+ *   coherency rules as defined by the CPU in the system.
+ *
+ * What this API does not do:
+ * - Provide exclusion between various callers - including callers that
+ *   operation on other mappings of the same physical page
+ * - Restore default attributes when a page is freed
+ * - Guarantee that mappings other than the requested one are
+ *   in any state, other than that these do not violate rules for
+ *   the CPU you have. Do not depend on any effects on other mappings,
+ *   CPUs other than the one you have may have more relaxed rules.
+ * The caller is required to take care of these.
+ */
+
+int _set_memory_uc(unsigned long addr, int numpages);
+int _set_memory_wc(unsigned long addr, int numpages);
+int _set_memory_wb(unsigned long addr, int numpages);
+int set_memory_uc(unsigned long addr, int numpages);
+int set_memory_wc(unsigned long addr, int numpages);
+int set_memory_wb(unsigned long addr, int numpages);
+int set_memory_x(unsigned long addr, int numpages);
+int set_memory_nx(unsigned long addr, int numpages);
+int set_memory_ro(unsigned long addr, int numpages);
+int set_memory_rw(unsigned long addr, int numpages);
+int set_memory_np(unsigned long addr, int numpages);
+int set_memory_4k(unsigned long addr, int numpages);
+
+int set_memory_array_uc(unsigned long *addr, int addrinarray);
+int set_memory_array_wb(unsigned long *addr, int addrinarray);
+
+/*
+ * For legacy compatibility with the old APIs, a few functions
+ * are provided that work on a "struct page".
+ * These functions operate ONLY on the 1:1 kernel mapping of the
+ * memory that the struct page represents, and internally just
+ * call the set_memory_* function. See the description of the
+ * set_memory_* function for more details on conventions.
+ *
+ * These APIs should be considered *deprecated* and are likely going to
+ * be removed in the future.
+ * The reason for this is the implicit operation on the 1:1 mapping only,
+ * making this not a generally useful API.
+ *
+ * Specifically, many users of the old APIs had a virtual address,
+ * called virt_to_page() or vmalloc_to_page() on that address to
+ * get a struct page* that the old API required.
+ * To convert these cases, use set_memory_*() on the original
+ * virtual address, do not use these functions.
+ */
+
+int set_pages_uc(struct page *page, int numpages);
+int set_pages_wb(struct page *page, int numpages);
+int set_pages_x(struct page *page, int numpages);
+int set_pages_nx(struct page *page, int numpages);
+int set_pages_ro(struct page *page, int numpages);
+int set_pages_rw(struct page *page, int numpages);
+
+
+void clflush_cache_range(void *addr, unsigned int size);
+
+#ifdef CONFIG_DEBUG_RODATA
+void mark_rodata_ro(void);
+extern const int rodata_test_data;
+#endif
+
+#ifdef CONFIG_DEBUG_RODATA_TEST
+int rodata_test(void);
+#else
+static inline int rodata_test(void)
+{
+	return 0;
+}
+#endif
+
+#endif /* _ASM_X86_CACHEFLUSH_H */
diff --git a/arch/x86/include/asm/calgary.h b/arch/x86/include/asm/calgary.h
new file mode 100644
index 0000000..b03bedb
--- /dev/null
+++ b/arch/x86/include/asm/calgary.h
@@ -0,0 +1,72 @@
+/*
+ * Derived from include/asm-powerpc/iommu.h
+ *
+ * Copyright IBM Corporation, 2006-2007
+ *
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_CALGARY_H
+#define _ASM_X86_CALGARY_H
+
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/timer.h>
+#include <asm/types.h>
+
+struct iommu_table {
+	struct cal_chipset_ops *chip_ops; /* chipset specific funcs */
+	unsigned long  it_base;      /* mapped address of tce table */
+	unsigned long  it_hint;      /* Hint for next alloc */
+	unsigned long *it_map;       /* A simple allocation bitmap for now */
+	void __iomem  *bbar;         /* Bridge BAR */
+	u64	       tar_val;      /* Table Address Register */
+	struct timer_list watchdog_timer;
+	spinlock_t     it_lock;      /* Protects it_map */
+	unsigned int   it_size;      /* Size of iommu table in entries */
+	unsigned char  it_busno;     /* Bus number this table belongs to */
+};
+
+struct cal_chipset_ops {
+	void (*handle_quirks)(struct iommu_table *tbl, struct pci_dev *dev);
+	void (*tce_cache_blast)(struct iommu_table *tbl);
+	void (*dump_error_regs)(struct iommu_table *tbl);
+};
+
+#define TCE_TABLE_SIZE_UNSPECIFIED	~0
+#define TCE_TABLE_SIZE_64K		0
+#define TCE_TABLE_SIZE_128K		1
+#define TCE_TABLE_SIZE_256K		2
+#define TCE_TABLE_SIZE_512K		3
+#define TCE_TABLE_SIZE_1M		4
+#define TCE_TABLE_SIZE_2M		5
+#define TCE_TABLE_SIZE_4M		6
+#define TCE_TABLE_SIZE_8M		7
+
+extern int use_calgary;
+
+#ifdef CONFIG_CALGARY_IOMMU
+extern int calgary_iommu_init(void);
+extern void detect_calgary(void);
+#else
+static inline int calgary_iommu_init(void) { return 1; }
+static inline void detect_calgary(void) { return; }
+#endif
+
+#endif /* _ASM_X86_CALGARY_H */
diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h
new file mode 100644
index 0000000..2bc162e
--- /dev/null
+++ b/arch/x86/include/asm/calling.h
@@ -0,0 +1,170 @@
+/*
+ * Some macros to handle stack frames in assembly.
+ */
+
+#define R15		  0
+#define R14		  8
+#define R13		 16
+#define R12		 24
+#define RBP		 32
+#define RBX		 40
+
+/* arguments: interrupts/non tracing syscalls only save upto here*/
+#define R11		 48
+#define R10		 56
+#define R9		 64
+#define R8		 72
+#define RAX		 80
+#define RCX		 88
+#define RDX		 96
+#define RSI		104
+#define RDI		112
+#define ORIG_RAX	120       /* + error_code */
+/* end of arguments */
+
+/* cpu exception frame or undefined in case of fast syscall. */
+#define RIP		128
+#define CS		136
+#define EFLAGS		144
+#define RSP		152
+#define SS		160
+
+#define ARGOFFSET	R11
+#define SWFRAME		ORIG_RAX
+
+	.macro SAVE_ARGS addskip=0, norcx=0, nor891011=0
+	subq  $9*8+\addskip, %rsp
+	CFI_ADJUST_CFA_OFFSET	9*8+\addskip
+	movq  %rdi, 8*8(%rsp)
+	CFI_REL_OFFSET	rdi, 8*8
+	movq  %rsi, 7*8(%rsp)
+	CFI_REL_OFFSET	rsi, 7*8
+	movq  %rdx, 6*8(%rsp)
+	CFI_REL_OFFSET	rdx, 6*8
+	.if \norcx
+	.else
+	movq  %rcx, 5*8(%rsp)
+	CFI_REL_OFFSET	rcx, 5*8
+	.endif
+	movq  %rax, 4*8(%rsp)
+	CFI_REL_OFFSET	rax, 4*8
+	.if \nor891011
+	.else
+	movq  %r8, 3*8(%rsp)
+	CFI_REL_OFFSET	r8,  3*8
+	movq  %r9, 2*8(%rsp)
+	CFI_REL_OFFSET	r9,  2*8
+	movq  %r10, 1*8(%rsp)
+	CFI_REL_OFFSET	r10, 1*8
+	movq  %r11, (%rsp)
+	CFI_REL_OFFSET	r11, 0*8
+	.endif
+	.endm
+
+#define ARG_SKIP	9*8
+
+	.macro RESTORE_ARGS skiprax=0, addskip=0, skiprcx=0, skipr11=0, \
+			    skipr8910=0, skiprdx=0
+	.if \skipr11
+	.else
+	movq (%rsp), %r11
+	CFI_RESTORE r11
+	.endif
+	.if \skipr8910
+	.else
+	movq 1*8(%rsp), %r10
+	CFI_RESTORE r10
+	movq 2*8(%rsp), %r9
+	CFI_RESTORE r9
+	movq 3*8(%rsp), %r8
+	CFI_RESTORE r8
+	.endif
+	.if \skiprax
+	.else
+	movq 4*8(%rsp), %rax
+	CFI_RESTORE rax
+	.endif
+	.if \skiprcx
+	.else
+	movq 5*8(%rsp), %rcx
+	CFI_RESTORE rcx
+	.endif
+	.if \skiprdx
+	.else
+	movq 6*8(%rsp), %rdx
+	CFI_RESTORE rdx
+	.endif
+	movq 7*8(%rsp), %rsi
+	CFI_RESTORE rsi
+	movq 8*8(%rsp), %rdi
+	CFI_RESTORE rdi
+	.if ARG_SKIP+\addskip > 0
+	addq $ARG_SKIP+\addskip, %rsp
+	CFI_ADJUST_CFA_OFFSET	-(ARG_SKIP+\addskip)
+	.endif
+	.endm
+
+	.macro LOAD_ARGS offset, skiprax=0
+	movq \offset(%rsp),    %r11
+	movq \offset+8(%rsp),  %r10
+	movq \offset+16(%rsp), %r9
+	movq \offset+24(%rsp), %r8
+	movq \offset+40(%rsp), %rcx
+	movq \offset+48(%rsp), %rdx
+	movq \offset+56(%rsp), %rsi
+	movq \offset+64(%rsp), %rdi
+	.if \skiprax
+	.else
+	movq \offset+72(%rsp), %rax
+	.endif
+	.endm
+
+#define REST_SKIP	6*8
+
+	.macro SAVE_REST
+	subq $REST_SKIP, %rsp
+	CFI_ADJUST_CFA_OFFSET	REST_SKIP
+	movq %rbx, 5*8(%rsp)
+	CFI_REL_OFFSET	rbx, 5*8
+	movq %rbp, 4*8(%rsp)
+	CFI_REL_OFFSET	rbp, 4*8
+	movq %r12, 3*8(%rsp)
+	CFI_REL_OFFSET	r12, 3*8
+	movq %r13, 2*8(%rsp)
+	CFI_REL_OFFSET	r13, 2*8
+	movq %r14, 1*8(%rsp)
+	CFI_REL_OFFSET	r14, 1*8
+	movq %r15, (%rsp)
+	CFI_REL_OFFSET	r15, 0*8
+	.endm
+
+	.macro RESTORE_REST
+	movq (%rsp),     %r15
+	CFI_RESTORE r15
+	movq 1*8(%rsp),  %r14
+	CFI_RESTORE r14
+	movq 2*8(%rsp),  %r13
+	CFI_RESTORE r13
+	movq 3*8(%rsp),  %r12
+	CFI_RESTORE r12
+	movq 4*8(%rsp),  %rbp
+	CFI_RESTORE rbp
+	movq 5*8(%rsp),  %rbx
+	CFI_RESTORE rbx
+	addq $REST_SKIP, %rsp
+	CFI_ADJUST_CFA_OFFSET	-(REST_SKIP)
+	.endm
+
+	.macro SAVE_ALL
+	SAVE_ARGS
+	SAVE_REST
+	.endm
+
+	.macro RESTORE_ALL addskip=0
+	RESTORE_REST
+	RESTORE_ARGS 0, \addskip
+	.endm
+
+	.macro icebp
+	.byte 0xf1
+	.endm
diff --git a/arch/x86/include/asm/checksum.h b/arch/x86/include/asm/checksum.h
new file mode 100644
index 0000000..848850f
--- /dev/null
+++ b/arch/x86/include/asm/checksum.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "checksum_32.h"
+#else
+# include "checksum_64.h"
+#endif
diff --git a/arch/x86/include/asm/checksum_32.h b/arch/x86/include/asm/checksum_32.h
new file mode 100644
index 0000000..7c5ef8b
--- /dev/null
+++ b/arch/x86/include/asm/checksum_32.h
@@ -0,0 +1,189 @@
+#ifndef _ASM_X86_CHECKSUM_32_H
+#define _ASM_X86_CHECKSUM_32_H
+
+#include <linux/in6.h>
+
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
+					    int len, __wsum sum,
+					    int *src_err_ptr, int *dst_err_ptr);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	access_ok().
+ */
+static inline __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					       int len, __wsum sum)
+{
+	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
+}
+
+static inline __wsum csum_partial_copy_from_user(const void __user *src,
+						 void *dst,
+						 int len, __wsum sum,
+						 int *err_ptr)
+{
+	might_sleep();
+	return csum_partial_copy_generic((__force void *)src, dst,
+					 len, sum, err_ptr, NULL);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum;
+
+	asm volatile("movl (%1), %0	;\n"
+		     "subl $4, %2	;\n"
+		     "jbe 2f		;\n"
+		     "addl 4(%1), %0	;\n"
+		     "adcl 8(%1), %0	;\n"
+		     "adcl 12(%1), %0;\n"
+		     "1:	adcl 16(%1), %0	;\n"
+		     "lea 4(%1), %1	;\n"
+		     "decl %2	;\n"
+		     "jne 1b		;\n"
+		     "adcl $0, %0	;\n"
+		     "movl %0, %2	;\n"
+		     "shrl $16, %0	;\n"
+		     "addw %w2, %w0	;\n"
+		     "adcl $0, %0	;\n"
+		     "notl %0	;\n"
+		     "2:		;\n"
+	/* Since the input registers which are loaded with iph and ihl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+		     : "=r" (sum), "=r" (iph), "=r" (ihl)
+		     : "1" (iph), "2" (ihl)
+		     : "memory");
+	return (__force __sum16)sum;
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	asm("addl %1, %0		;\n"
+	    "adcl $0xffff, %0	;\n"
+	    : "=r" (sum)
+	    : "r" ((__force u32)sum << 16),
+	      "0" ((__force u32)sum & 0xffff0000));
+	return (__force __sum16)(~(__force u32)sum >> 16);
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+	asm("addl %1, %0	;\n"
+	    "adcl %2, %0	;\n"
+	    "adcl %3, %0	;\n"
+	    "adcl $0, %0	;\n"
+	    : "=r" (sum)
+	    : "g" (daddr), "g"(saddr),
+	      "g" ((len + proto) << 8), "0" (sum));
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+    return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, unsigned short proto,
+				      __wsum sum)
+{
+	asm("addl 0(%1), %0	;\n"
+	    "adcl 4(%1), %0	;\n"
+	    "adcl 8(%1), %0	;\n"
+	    "adcl 12(%1), %0	;\n"
+	    "adcl 0(%2), %0	;\n"
+	    "adcl 4(%2), %0	;\n"
+	    "adcl 8(%2), %0	;\n"
+	    "adcl 12(%2), %0	;\n"
+	    "adcl %3, %0	;\n"
+	    "adcl %4, %0	;\n"
+	    "adcl $0, %0	;\n"
+	    : "=&r" (sum)
+	    : "r" (saddr), "r" (daddr),
+	      "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+
+	return csum_fold(sum);
+}
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline __wsum csum_and_copy_to_user(const void *src,
+					   void __user *dst,
+					   int len, __wsum sum,
+					   int *err_ptr)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, dst, len))
+		return csum_partial_copy_generic(src, (__force void *)dst,
+						 len, sum, NULL, err_ptr);
+
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return (__force __wsum)-1; /* invalid checksum */
+}
+
+#endif /* _ASM_X86_CHECKSUM_32_H */
diff --git a/arch/x86/include/asm/checksum_64.h b/arch/x86/include/asm/checksum_64.h
new file mode 100644
index 0000000..9bfdc41
--- /dev/null
+++ b/arch/x86/include/asm/checksum_64.h
@@ -0,0 +1,191 @@
+#ifndef _ASM_X86_CHECKSUM_64_H
+#define _ASM_X86_CHECKSUM_64_H
+
+/*
+ * Checksums for x86-64
+ * Copyright 2002 by Andi Kleen, SuSE Labs
+ * with some code from asm-x86/checksum.h
+ */
+
+#include <linux/compiler.h>
+#include <asm/uaccess.h>
+#include <asm/byteorder.h>
+
+/**
+ * csum_fold - Fold and invert a 32bit checksum.
+ * sum: 32bit unfolded sum
+ *
+ * Fold a 32bit running checksum to 16bit and invert it. This is usually
+ * the last step before putting a checksum into a packet.
+ * Make sure not to mix with 64bit checksums.
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	asm("  addl %1,%0\n"
+	    "  adcl $0xffff,%0"
+	    : "=r" (sum)
+	    : "r" ((__force u32)sum << 16),
+	      "0" ((__force u32)sum & 0xffff0000));
+	return (__force __sum16)(~(__force u32)sum >> 16);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+
+/**
+ * ip_fast_csum - Compute the IPv4 header checksum efficiently.
+ * iph: ipv4 header
+ * ihl: length of header / 4
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum;
+
+	asm("  movl (%1), %0\n"
+	    "  subl $4, %2\n"
+	    "  jbe 2f\n"
+	    "  addl 4(%1), %0\n"
+	    "  adcl 8(%1), %0\n"
+	    "  adcl 12(%1), %0\n"
+	    "1: adcl 16(%1), %0\n"
+	    "  lea 4(%1), %1\n"
+	    "  decl %2\n"
+	    "  jne	1b\n"
+	    "  adcl $0, %0\n"
+	    "  movl %0, %2\n"
+	    "  shrl $16, %0\n"
+	    "  addw %w2, %w0\n"
+	    "  adcl $0, %0\n"
+	    "  notl %0\n"
+	    "2:"
+	/* Since the input registers which are loaded with iph and ihl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+	    : "=r" (sum), "=r" (iph), "=r" (ihl)
+	    : "1" (iph), "2" (ihl)
+	    : "memory");
+	return (__force __sum16)sum;
+}
+
+/**
+ * csum_tcpup_nofold - Compute an IPv4 pseudo header checksum.
+ * @saddr: source address
+ * @daddr: destination address
+ * @len: length of packet
+ * @proto: ip protocol of packet
+ * @sum: initial sum to be added in (32bit unfolded)
+ *
+ * Returns the pseudo header checksum the input data. Result is
+ * 32bit unfolded.
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		   unsigned short proto, __wsum sum)
+{
+	asm("  addl %1, %0\n"
+	    "  adcl %2, %0\n"
+	    "  adcl %3, %0\n"
+	    "  adcl $0, %0\n"
+	    : "=r" (sum)
+	    : "g" (daddr), "g" (saddr),
+	      "g" ((len + proto)<<8), "0" (sum));
+	return sum;
+}
+
+
+/**
+ * csum_tcpup_magic - Compute an IPv4 pseudo header checksum.
+ * @saddr: source address
+ * @daddr: destination address
+ * @len: length of packet
+ * @proto: ip protocol of packet
+ * @sum: initial sum to be added in (32bit unfolded)
+ *
+ * Returns the 16bit pseudo header checksum the input data already
+ * complemented and ready to be filled in.
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/**
+ * csum_partial - Compute an internet checksum.
+ * @buff: buffer to be checksummed
+ * @len: length of buffer.
+ * @sum: initial sum to be added in (32bit unfolded)
+ *
+ * Returns the 32bit unfolded internet checksum of the buffer.
+ * Before filling it in it needs to be csum_fold()'ed.
+ * buff should be aligned to a 64bit boundary if possible.
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+#define  _HAVE_ARCH_COPY_AND_CSUM_FROM_USER 1
+#define HAVE_CSUM_COPY_USER 1
+
+
+/* Do not call this directly. Use the wrappers below */
+extern __wsum csum_partial_copy_generic(const void *src, const void *dst,
+					int len, __wsum sum,
+					int *src_err_ptr, int *dst_err_ptr);
+
+
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					  int len, __wsum isum, int *errp);
+extern __wsum csum_partial_copy_to_user(const void *src, void __user *dst,
+					int len, __wsum isum, int *errp);
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					int len, __wsum sum);
+
+/* Old names. To be removed. */
+#define csum_and_copy_to_user csum_partial_copy_to_user
+#define csum_and_copy_from_user csum_partial_copy_from_user
+
+/**
+ * ip_compute_csum - Compute an 16bit IP checksum.
+ * @buff: buffer address.
+ * @len: length of buffer.
+ *
+ * Returns the 16bit folded/inverted checksum of the passed buffer.
+ * Ready to fill in.
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+/**
+ * csum_ipv6_magic - Compute checksum of an IPv6 pseudo header.
+ * @saddr: source address
+ * @daddr: destination address
+ * @len: length of packet
+ * @proto: protocol of packet
+ * @sum: initial sum (32bit unfolded) to be added in
+ *
+ * Computes an IPv6 pseudo header checksum. This sum is added the checksum
+ * into UDP/TCP packets and contains some link layer information.
+ * Returns the unfolded 32bit checksum.
+ */
+
+struct in6_addr;
+
+#define _HAVE_ARCH_IPV6_CSUM 1
+extern __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+		__u32 len, unsigned short proto, __wsum sum);
+
+static inline unsigned add32_with_carry(unsigned a, unsigned b)
+{
+	asm("addl %2,%0\n\t"
+	    "adcl $0,%0"
+	    : "=r" (a)
+	    : "0" (a), "r" (b));
+	return a;
+}
+
+#endif /* _ASM_X86_CHECKSUM_64_H */
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
new file mode 100644
index 0000000..a460fa0
--- /dev/null
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "cmpxchg_32.h"
+#else
+# include "cmpxchg_64.h"
+#endif
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
new file mode 100644
index 0000000..82ceb78
--- /dev/null
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -0,0 +1,344 @@
+#ifndef _ASM_X86_CMPXCHG_32_H
+#define _ASM_X86_CMPXCHG_32_H
+
+#include <linux/bitops.h> /* for LOCK_PREFIX */
+
+/*
+ * Note: if you use set64_bit(), __cmpxchg64(), or their variants, you
+ *       you need to test for the feature in boot_cpu_data.
+ */
+
+#define xchg(ptr, v)							\
+	((__typeof__(*(ptr)))__xchg((unsigned long)(v), (ptr), sizeof(*(ptr))))
+
+struct __xchg_dummy {
+	unsigned long a[100];
+};
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+/*
+ * The semantics of XCHGCMP8B are a bit strange, this is why
+ * there is a loop and the loading of %%eax and %%edx has to
+ * be inside. This inlines well in most cases, the cached
+ * cost is around ~38 cycles. (in the future we might want
+ * to do an SIMD/3DNOW!/MMX/FPU 64-bit store here, but that
+ * might have an implicit FPU-save as a cost, so it's not
+ * clear which path to go.)
+ *
+ * cmpxchg8b must be used with the lock prefix here to allow
+ * the instruction to be executed atomically, see page 3-102
+ * of the instruction set reference 24319102.pdf. We need
+ * the reader side to see the coherent 64bit value.
+ */
+static inline void __set_64bit(unsigned long long *ptr,
+			       unsigned int low, unsigned int high)
+{
+	asm volatile("\n1:\t"
+		     "movl (%0), %%eax\n\t"
+		     "movl 4(%0), %%edx\n\t"
+		     LOCK_PREFIX "cmpxchg8b (%0)\n\t"
+		     "jnz 1b"
+		     : /* no outputs */
+		     : "D"(ptr),
+		       "b"(low),
+		       "c"(high)
+		     : "ax", "dx", "memory");
+}
+
+static inline void __set_64bit_constant(unsigned long long *ptr,
+					unsigned long long value)
+{
+	__set_64bit(ptr, (unsigned int)value, (unsigned int)(value >> 32));
+}
+
+#define ll_low(x)	*(((unsigned int *)&(x)) + 0)
+#define ll_high(x)	*(((unsigned int *)&(x)) + 1)
+
+static inline void __set_64bit_var(unsigned long long *ptr,
+				   unsigned long long value)
+{
+	__set_64bit(ptr, ll_low(value), ll_high(value));
+}
+
+#define set_64bit(ptr, value)			\
+	(__builtin_constant_p((value))		\
+	 ? __set_64bit_constant((ptr), (value))	\
+	 : __set_64bit_var((ptr), (value)))
+
+#define _set_64bit(ptr, value)						\
+	(__builtin_constant_p(value)					\
+	 ? __set_64bit(ptr, (unsigned int)(value),			\
+		       (unsigned int)((value) >> 32))			\
+	 : __set_64bit(ptr, ll_low((value)), ll_high((value))))
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
+ * Note 2: xchg has side effect, so that attribute volatile is necessary,
+ *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+				   int size)
+{
+	switch (size) {
+	case 1:
+		asm volatile("xchgb %b0,%1"
+			     : "=q" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	case 2:
+		asm volatile("xchgw %w0,%1"
+			     : "=r" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	case 4:
+		asm volatile("xchgl %0,%1"
+			     : "=r" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	}
+	return x;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#ifdef CONFIG_X86_CMPXCHG
+#define __HAVE_ARCH_CMPXCHG 1
+#define cmpxchg(ptr, o, n)						\
+	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
+				       (unsigned long)(n),		\
+				       sizeof(*(ptr))))
+#define sync_cmpxchg(ptr, o, n)						\
+	((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o),	\
+					    (unsigned long)(n),		\
+					    sizeof(*(ptr))))
+#define cmpxchg_local(ptr, o, n)					\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+					     (unsigned long)(n),	\
+					     sizeof(*(ptr))))
+#endif
+
+#ifdef CONFIG_X86_CMPXCHG64
+#define cmpxchg64(ptr, o, n)						\
+	((__typeof__(*(ptr)))__cmpxchg64((ptr), (unsigned long long)(o), \
+					 (unsigned long long)(n)))
+#define cmpxchg64_local(ptr, o, n)					\
+	((__typeof__(*(ptr)))__cmpxchg64_local((ptr), (unsigned long long)(o), \
+					       (unsigned long long)(n)))
+#endif
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile(LOCK_PREFIX "cmpxchgl %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+/*
+ * Always use locked operations when touching memory shared with a
+ * hypervisor, since the system may be SMP even if the guest kernel
+ * isn't.
+ */
+static inline unsigned long __sync_cmpxchg(volatile void *ptr,
+					   unsigned long old,
+					   unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile("lock; cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile("lock; cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile("lock; cmpxchgl %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+					    unsigned long old,
+					    unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile("cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile("cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile("cmpxchgl %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+static inline unsigned long long __cmpxchg64(volatile void *ptr,
+					     unsigned long long old,
+					     unsigned long long new)
+{
+	unsigned long long prev;
+	asm volatile(LOCK_PREFIX "cmpxchg8b %3"
+		     : "=A"(prev)
+		     : "b"((unsigned long)new),
+		       "c"((unsigned long)(new >> 32)),
+		       "m"(*__xg(ptr)),
+		       "0"(old)
+		     : "memory");
+	return prev;
+}
+
+static inline unsigned long long __cmpxchg64_local(volatile void *ptr,
+						   unsigned long long old,
+						   unsigned long long new)
+{
+	unsigned long long prev;
+	asm volatile("cmpxchg8b %3"
+		     : "=A"(prev)
+		     : "b"((unsigned long)new),
+		       "c"((unsigned long)(new >> 32)),
+		       "m"(*__xg(ptr)),
+		       "0"(old)
+		     : "memory");
+	return prev;
+}
+
+#ifndef CONFIG_X86_CMPXCHG
+/*
+ * Building a kernel capable running on 80386. It may be necessary to
+ * simulate the cmpxchg on the 80386 CPU. For that purpose we define
+ * a function for each of the sizes we support.
+ */
+
+extern unsigned long cmpxchg_386_u8(volatile void *, u8, u8);
+extern unsigned long cmpxchg_386_u16(volatile void *, u16, u16);
+extern unsigned long cmpxchg_386_u32(volatile void *, u32, u32);
+
+static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old,
+					unsigned long new, int size)
+{
+	switch (size) {
+	case 1:
+		return cmpxchg_386_u8(ptr, old, new);
+	case 2:
+		return cmpxchg_386_u16(ptr, old, new);
+	case 4:
+		return cmpxchg_386_u32(ptr, old, new);
+	}
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	if (likely(boot_cpu_data.x86 > 3))				\
+		__ret = (__typeof__(*(ptr)))__cmpxchg((ptr),		\
+				(unsigned long)(o), (unsigned long)(n),	\
+				sizeof(*(ptr)));			\
+	else								\
+		__ret = (__typeof__(*(ptr)))cmpxchg_386((ptr),		\
+				(unsigned long)(o), (unsigned long)(n),	\
+				sizeof(*(ptr)));			\
+	__ret;								\
+})
+#define cmpxchg_local(ptr, o, n)					\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	if (likely(boot_cpu_data.x86 > 3))				\
+		__ret = (__typeof__(*(ptr)))__cmpxchg_local((ptr),	\
+				(unsigned long)(o), (unsigned long)(n),	\
+				sizeof(*(ptr)));			\
+	else								\
+		__ret = (__typeof__(*(ptr)))cmpxchg_386((ptr),		\
+				(unsigned long)(o), (unsigned long)(n),	\
+				sizeof(*(ptr)));			\
+	__ret;								\
+})
+#endif
+
+#ifndef CONFIG_X86_CMPXCHG64
+/*
+ * Building a kernel capable running on 80386 and 80486. It may be necessary
+ * to simulate the cmpxchg8b on the 80386 and 80486 CPU.
+ */
+
+extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
+
+#define cmpxchg64(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	if (likely(boot_cpu_data.x86 > 4))				\
+		__ret = (__typeof__(*(ptr)))__cmpxchg64((ptr),		\
+				(unsigned long long)(o),		\
+				(unsigned long long)(n));		\
+	else								\
+		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
+				(unsigned long long)(o),		\
+				(unsigned long long)(n));		\
+	__ret;								\
+})
+#define cmpxchg64_local(ptr, o, n)					\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	if (likely(boot_cpu_data.x86 > 4))				\
+		__ret = (__typeof__(*(ptr)))__cmpxchg64_local((ptr),	\
+				(unsigned long long)(o),		\
+				(unsigned long long)(n));		\
+	else								\
+		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
+				(unsigned long long)(o),		\
+				(unsigned long long)(n));		\
+	__ret;								\
+})
+
+#endif
+
+#endif /* _ASM_X86_CMPXCHG_32_H */
diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h
new file mode 100644
index 0000000..52de72e
--- /dev/null
+++ b/arch/x86/include/asm/cmpxchg_64.h
@@ -0,0 +1,185 @@
+#ifndef _ASM_X86_CMPXCHG_64_H
+#define _ASM_X86_CMPXCHG_64_H
+
+#include <asm/alternative.h> /* Provides LOCK_PREFIX */
+
+#define xchg(ptr, v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v), \
+						 (ptr), sizeof(*(ptr))))
+
+#define __xg(x) ((volatile long *)(x))
+
+static inline void set_64bit(volatile unsigned long *ptr, unsigned long val)
+{
+	*ptr = val;
+}
+
+#define _set_64bit set_64bit
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
+ * Note 2: xchg has side effect, so that attribute volatile is necessary,
+ *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+				   int size)
+{
+	switch (size) {
+	case 1:
+		asm volatile("xchgb %b0,%1"
+			     : "=q" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	case 2:
+		asm volatile("xchgw %w0,%1"
+			     : "=r" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	case 4:
+		asm volatile("xchgl %k0,%1"
+			     : "=r" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	case 8:
+		asm volatile("xchgq %0,%1"
+			     : "=r" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	}
+	return x;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile(LOCK_PREFIX "cmpxchgl %k1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 8:
+		asm volatile(LOCK_PREFIX "cmpxchgq %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+/*
+ * Always use locked operations when touching memory shared with a
+ * hypervisor, since the system may be SMP even if the guest kernel
+ * isn't.
+ */
+static inline unsigned long __sync_cmpxchg(volatile void *ptr,
+					   unsigned long old,
+					   unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile("lock; cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile("lock; cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile("lock; cmpxchgl %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+					    unsigned long old,
+					    unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile("cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile("cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile("cmpxchgl %k1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 8:
+		asm volatile("cmpxchgq %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						\
+	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
+				       (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64(ptr, o, n)						\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+})
+#define cmpxchg_local(ptr, o, n)					\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+					     (unsigned long)(n),	\
+					     sizeof(*(ptr))))
+#define sync_cmpxchg(ptr, o, n)						\
+	((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o),	\
+					    (unsigned long)(n),		\
+					    sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n)					\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+})
+
+#endif /* _ASM_X86_CMPXCHG_64_H */
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
new file mode 100644
index 0000000..9a9c7bd
--- /dev/null
+++ b/arch/x86/include/asm/compat.h
@@ -0,0 +1,218 @@
+#ifndef _ASM_X86_COMPAT_H
+#define _ASM_X86_COMPAT_H
+
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <asm/user32.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_timer_t;
+typedef s32		compat_key_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64 __attribute__((aligned(4))) compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64 __attribute__((aligned(4))) compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	u16		__pad1;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	u16		__pad2;
+	u32		st_size;
+	u32		st_blksize;
+	u32		st_blocks;
+	u32		st_atime;
+	u32		st_atime_nsec;
+	u32		st_mtime;
+	u32		st_mtime_nsec;
+	u32		st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4;
+	u32		__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/*
+ * IA32 uses 4 byte alignment for 64 bit quantities,
+ * so we need to pack this structure.
+ */
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+} __attribute__((packed));
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32               compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	unsigned short mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t unused1;
+	compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __unused1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __unused2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t  msg_stime;
+	compat_ulong_t __unused1;
+	compat_time_t  msg_rtime;
+	compat_ulong_t __unused2;
+	compat_time_t  msg_ctime;
+	compat_ulong_t __unused3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __unused1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __unused2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __unused3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+/*
+ * The type of struct elf_prstatus.pr_reg in compatible core dumps.
+ */
+typedef struct user_regs_struct32 compat_elf_gregset_t;
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = task_pt_regs(current);
+	return (void __user *)regs->sp - len;
+}
+
+static inline int is_compat_task(void)
+{
+	return current_thread_info()->status & TS_COMPAT;
+}
+
+#endif /* _ASM_X86_COMPAT_H */
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
new file mode 100644
index 0000000..bae482d
--- /dev/null
+++ b/arch/x86/include/asm/cpu.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_CPU_H
+#define _ASM_X86_CPU_H
+
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/topology.h>
+#include <linux/nodemask.h>
+#include <linux/percpu.h>
+
+struct x86_cpu {
+	struct cpu cpu;
+};
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int arch_register_cpu(int num);
+extern void arch_unregister_cpu(int);
+#endif
+
+DECLARE_PER_CPU(int, cpu_state);
+#endif /* _ASM_X86_CPU_H */
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
new file mode 100644
index 0000000..f73e95d
--- /dev/null
+++ b/arch/x86/include/asm/cpufeature.h
@@ -0,0 +1,271 @@
+/*
+ * Defines x86 CPU feature bits
+ */
+#ifndef _ASM_X86_CPUFEATURE_H
+#define _ASM_X86_CPUFEATURE_H
+
+#include <asm/required-features.h>
+
+#define NCAPINTS	9	/* N 32-bit words worth of info */
+
+/*
+ * Note: If the comment begins with a quoted string, that string is used
+ * in /proc/cpuinfo instead of the macro name.  If the string is "",
+ * this feature bit is not displayed in /proc/cpuinfo at all.
+ */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
+#define X86_FEATURE_FPU		(0*32+ 0) /* Onboard FPU */
+#define X86_FEATURE_VME		(0*32+ 1) /* Virtual Mode Extensions */
+#define X86_FEATURE_DE		(0*32+ 2) /* Debugging Extensions */
+#define X86_FEATURE_PSE		(0*32+ 3) /* Page Size Extensions */
+#define X86_FEATURE_TSC		(0*32+ 4) /* Time Stamp Counter */
+#define X86_FEATURE_MSR		(0*32+ 5) /* Model-Specific Registers */
+#define X86_FEATURE_PAE		(0*32+ 6) /* Physical Address Extensions */
+#define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Architecture */
+#define X86_FEATURE_CX8		(0*32+ 8) /* CMPXCHG8 instruction */
+#define X86_FEATURE_APIC	(0*32+ 9) /* Onboard APIC */
+#define X86_FEATURE_SEP		(0*32+11) /* SYSENTER/SYSEXIT */
+#define X86_FEATURE_MTRR	(0*32+12) /* Memory Type Range Registers */
+#define X86_FEATURE_PGE		(0*32+13) /* Page Global Enable */
+#define X86_FEATURE_MCA		(0*32+14) /* Machine Check Architecture */
+#define X86_FEATURE_CMOV	(0*32+15) /* CMOV instructions */
+					  /* (plus FCMOVcc, FCOMI with FPU) */
+#define X86_FEATURE_PAT		(0*32+16) /* Page Attribute Table */
+#define X86_FEATURE_PSE36	(0*32+17) /* 36-bit PSEs */
+#define X86_FEATURE_PN		(0*32+18) /* Processor serial number */
+#define X86_FEATURE_CLFLSH	(0*32+19) /* "clflush" CLFLUSH instruction */
+#define X86_FEATURE_DS		(0*32+21) /* "dts" Debug Store */
+#define X86_FEATURE_ACPI	(0*32+22) /* ACPI via MSR */
+#define X86_FEATURE_MMX		(0*32+23) /* Multimedia Extensions */
+#define X86_FEATURE_FXSR	(0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */
+#define X86_FEATURE_XMM		(0*32+25) /* "sse" */
+#define X86_FEATURE_XMM2	(0*32+26) /* "sse2" */
+#define X86_FEATURE_SELFSNOOP	(0*32+27) /* "ss" CPU self snoop */
+#define X86_FEATURE_HT		(0*32+28) /* Hyper-Threading */
+#define X86_FEATURE_ACC		(0*32+29) /* "tm" Automatic clock control */
+#define X86_FEATURE_IA64	(0*32+30) /* IA-64 processor */
+#define X86_FEATURE_PBE		(0*32+31) /* Pending Break Enable */
+
+/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
+/* Don't duplicate feature flags which are redundant with Intel! */
+#define X86_FEATURE_SYSCALL	(1*32+11) /* SYSCALL/SYSRET */
+#define X86_FEATURE_MP		(1*32+19) /* MP Capable. */
+#define X86_FEATURE_NX		(1*32+20) /* Execute Disable */
+#define X86_FEATURE_MMXEXT	(1*32+22) /* AMD MMX extensions */
+#define X86_FEATURE_FXSR_OPT	(1*32+25) /* FXSAVE/FXRSTOR optimizations */
+#define X86_FEATURE_GBPAGES	(1*32+26) /* "pdpe1gb" GB pages */
+#define X86_FEATURE_RDTSCP	(1*32+27) /* RDTSCP */
+#define X86_FEATURE_LM		(1*32+29) /* Long Mode (x86-64) */
+#define X86_FEATURE_3DNOWEXT	(1*32+30) /* AMD 3DNow! extensions */
+#define X86_FEATURE_3DNOW	(1*32+31) /* 3DNow! */
+
+/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
+#define X86_FEATURE_RECOVERY	(2*32+ 0) /* CPU in recovery mode */
+#define X86_FEATURE_LONGRUN	(2*32+ 1) /* Longrun power control */
+#define X86_FEATURE_LRTI	(2*32+ 3) /* LongRun table interface */
+
+/* Other features, Linux-defined mapping, word 3 */
+/* This range is used for feature bits which conflict or are synthesized */
+#define X86_FEATURE_CXMMX	(3*32+ 0) /* Cyrix MMX extensions */
+#define X86_FEATURE_K6_MTRR	(3*32+ 1) /* AMD K6 nonstandard MTRRs */
+#define X86_FEATURE_CYRIX_ARR	(3*32+ 2) /* Cyrix ARRs (= MTRRs) */
+#define X86_FEATURE_CENTAUR_MCR	(3*32+ 3) /* Centaur MCRs (= MTRRs) */
+/* cpu types for specific tunings: */
+#define X86_FEATURE_K8		(3*32+ 4) /* "" Opteron, Athlon64 */
+#define X86_FEATURE_K7		(3*32+ 5) /* "" Athlon */
+#define X86_FEATURE_P3		(3*32+ 6) /* "" P3 */
+#define X86_FEATURE_P4		(3*32+ 7) /* "" P4 */
+#define X86_FEATURE_CONSTANT_TSC (3*32+ 8) /* TSC ticks at a constant rate */
+#define X86_FEATURE_UP		(3*32+ 9) /* smp kernel running on up */
+#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* "" FXSAVE leaks FOP/FIP/FOP */
+#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
+#define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_PEBS	(3*32+12) /* Precise-Event Based Sampling */
+#define X86_FEATURE_BTS		(3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_SYSCALL32	(3*32+14) /* "" syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32	(3*32+15) /* "" sysenter in ia32 userspace */
+#define X86_FEATURE_REP_GOOD	(3*32+16) /* rep microcode works well */
+#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* "" Mfence synchronizes RDTSC */
+#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
+#define X86_FEATURE_11AP	(3*32+19) /* "" Bad local APIC aka 11AP */
+#define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_AMDC1E	(3*32+21) /* AMD C1E detected */
+#define X86_FEATURE_XTOPOLOGY	(3*32+21) /* cpu topology enum extensions */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
+#define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
+#define X86_FEATURE_PCLMULQDQ	(4*32+ 1) /* PCLMULQDQ instruction */
+#define X86_FEATURE_DTES64	(4*32+ 2) /* 64-bit Debug Store */
+#define X86_FEATURE_MWAIT	(4*32+ 3) /* "monitor" Monitor/Mwait support */
+#define X86_FEATURE_DSCPL	(4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */
+#define X86_FEATURE_VMX		(4*32+ 5) /* Hardware virtualization */
+#define X86_FEATURE_SMX		(4*32+ 6) /* Safer mode */
+#define X86_FEATURE_EST		(4*32+ 7) /* Enhanced SpeedStep */
+#define X86_FEATURE_TM2		(4*32+ 8) /* Thermal Monitor 2 */
+#define X86_FEATURE_SSSE3	(4*32+ 9) /* Supplemental SSE-3 */
+#define X86_FEATURE_CID		(4*32+10) /* Context ID */
+#define X86_FEATURE_FMA		(4*32+12) /* Fused multiply-add */
+#define X86_FEATURE_CX16	(4*32+13) /* CMPXCHG16B */
+#define X86_FEATURE_XTPR	(4*32+14) /* Send Task Priority Messages */
+#define X86_FEATURE_PDCM	(4*32+15) /* Performance Capabilities */
+#define X86_FEATURE_DCA		(4*32+18) /* Direct Cache Access */
+#define X86_FEATURE_XMM4_1	(4*32+19) /* "sse4_1" SSE-4.1 */
+#define X86_FEATURE_XMM4_2	(4*32+20) /* "sse4_2" SSE-4.2 */
+#define X86_FEATURE_X2APIC	(4*32+21) /* x2APIC */
+#define X86_FEATURE_AES		(4*32+25) /* AES instructions */
+#define X86_FEATURE_XSAVE	(4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
+#define X86_FEATURE_OSXSAVE	(4*32+27) /* "" XSAVE enabled in the OS */
+#define X86_FEATURE_AVX		(4*32+28) /* Advanced Vector Extensions */
+
+/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
+#define X86_FEATURE_XSTORE	(5*32+ 2) /* "rng" RNG present (xstore) */
+#define X86_FEATURE_XSTORE_EN	(5*32+ 3) /* "rng_en" RNG enabled */
+#define X86_FEATURE_XCRYPT	(5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */
+#define X86_FEATURE_XCRYPT_EN	(5*32+ 7) /* "ace_en" on-CPU crypto enabled */
+#define X86_FEATURE_ACE2	(5*32+ 8) /* Advanced Cryptography Engine v2 */
+#define X86_FEATURE_ACE2_EN	(5*32+ 9) /* ACE v2 enabled */
+#define X86_FEATURE_PHE		(5*32+10) /* PadLock Hash Engine */
+#define X86_FEATURE_PHE_EN	(5*32+11) /* PHE enabled */
+#define X86_FEATURE_PMM		(5*32+12) /* PadLock Montgomery Multiplier */
+#define X86_FEATURE_PMM_EN	(5*32+13) /* PMM enabled */
+
+/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
+#define X86_FEATURE_LAHF_LM	(6*32+ 0) /* LAHF/SAHF in long mode */
+#define X86_FEATURE_CMP_LEGACY	(6*32+ 1) /* If yes HyperThreading not valid */
+#define X86_FEATURE_SVM		(6*32+ 2) /* Secure virtual machine */
+#define X86_FEATURE_EXTAPIC	(6*32+ 3) /* Extended APIC space */
+#define X86_FEATURE_CR8_LEGACY	(6*32+ 4) /* CR8 in 32-bit mode */
+#define X86_FEATURE_ABM		(6*32+ 5) /* Advanced bit manipulation */
+#define X86_FEATURE_SSE4A	(6*32+ 6) /* SSE-4A */
+#define X86_FEATURE_MISALIGNSSE (6*32+ 7) /* Misaligned SSE mode */
+#define X86_FEATURE_3DNOWPREFETCH (6*32+ 8) /* 3DNow prefetch instructions */
+#define X86_FEATURE_OSVW	(6*32+ 9) /* OS Visible Workaround */
+#define X86_FEATURE_IBS		(6*32+10) /* Instruction Based Sampling */
+#define X86_FEATURE_SSE5	(6*32+11) /* SSE-5 */
+#define X86_FEATURE_SKINIT	(6*32+12) /* SKINIT/STGI instructions */
+#define X86_FEATURE_WDT		(6*32+13) /* Watchdog timer */
+
+/*
+ * Auxiliary flags: Linux defined - For features scattered in various
+ * CPUID levels like 0x6, 0xA etc
+ */
+#define X86_FEATURE_IDA		(7*32+ 0) /* Intel Dynamic Acceleration */
+
+/* Virtualization flags: Linux defined */
+#define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
+#define X86_FEATURE_VNMI        (8*32+ 1) /* Intel Virtual NMI */
+#define X86_FEATURE_FLEXPRIORITY (8*32+ 2) /* Intel FlexPriority */
+#define X86_FEATURE_EPT         (8*32+ 3) /* Intel Extended Page Table */
+#define X86_FEATURE_VPID        (8*32+ 4) /* Intel Virtual Processor ID */
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+
+#include <linux/bitops.h>
+
+extern const char * const x86_cap_flags[NCAPINTS*32];
+extern const char * const x86_power_flags[32];
+
+#define test_cpu_cap(c, bit)						\
+	 test_bit(bit, (unsigned long *)((c)->x86_capability))
+
+#define cpu_has(c, bit)							\
+	(__builtin_constant_p(bit) &&					\
+	 ( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) ||	\
+	   (((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) ||	\
+	   (((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) ||	\
+	   (((bit)>>5)==3 && (1UL<<((bit)&31) & REQUIRED_MASK3)) ||	\
+	   (((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) ||	\
+	   (((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) ||	\
+	   (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) ||	\
+	   (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) )	\
+	  ? 1 :								\
+	 test_cpu_cap(c, bit))
+
+#define boot_cpu_has(bit)	cpu_has(&boot_cpu_data, bit)
+
+#define set_cpu_cap(c, bit)	set_bit(bit, (unsigned long *)((c)->x86_capability))
+#define clear_cpu_cap(c, bit)	clear_bit(bit, (unsigned long *)((c)->x86_capability))
+#define setup_clear_cpu_cap(bit) do { \
+	clear_cpu_cap(&boot_cpu_data, bit);	\
+	set_bit(bit, (unsigned long *)cleared_cpu_caps); \
+} while (0)
+#define setup_force_cpu_cap(bit) do { \
+	set_cpu_cap(&boot_cpu_data, bit);	\
+	clear_bit(bit, (unsigned long *)cleared_cpu_caps);	\
+} while (0)
+
+#define cpu_has_fpu		boot_cpu_has(X86_FEATURE_FPU)
+#define cpu_has_vme		boot_cpu_has(X86_FEATURE_VME)
+#define cpu_has_de		boot_cpu_has(X86_FEATURE_DE)
+#define cpu_has_pse		boot_cpu_has(X86_FEATURE_PSE)
+#define cpu_has_tsc		boot_cpu_has(X86_FEATURE_TSC)
+#define cpu_has_pae		boot_cpu_has(X86_FEATURE_PAE)
+#define cpu_has_pge		boot_cpu_has(X86_FEATURE_PGE)
+#define cpu_has_apic		boot_cpu_has(X86_FEATURE_APIC)
+#define cpu_has_sep		boot_cpu_has(X86_FEATURE_SEP)
+#define cpu_has_mtrr		boot_cpu_has(X86_FEATURE_MTRR)
+#define cpu_has_mmx		boot_cpu_has(X86_FEATURE_MMX)
+#define cpu_has_fxsr		boot_cpu_has(X86_FEATURE_FXSR)
+#define cpu_has_xmm		boot_cpu_has(X86_FEATURE_XMM)
+#define cpu_has_xmm2		boot_cpu_has(X86_FEATURE_XMM2)
+#define cpu_has_xmm3		boot_cpu_has(X86_FEATURE_XMM3)
+#define cpu_has_ht		boot_cpu_has(X86_FEATURE_HT)
+#define cpu_has_mp		boot_cpu_has(X86_FEATURE_MP)
+#define cpu_has_nx		boot_cpu_has(X86_FEATURE_NX)
+#define cpu_has_k6_mtrr		boot_cpu_has(X86_FEATURE_K6_MTRR)
+#define cpu_has_cyrix_arr	boot_cpu_has(X86_FEATURE_CYRIX_ARR)
+#define cpu_has_centaur_mcr	boot_cpu_has(X86_FEATURE_CENTAUR_MCR)
+#define cpu_has_xstore		boot_cpu_has(X86_FEATURE_XSTORE)
+#define cpu_has_xstore_enabled	boot_cpu_has(X86_FEATURE_XSTORE_EN)
+#define cpu_has_xcrypt		boot_cpu_has(X86_FEATURE_XCRYPT)
+#define cpu_has_xcrypt_enabled	boot_cpu_has(X86_FEATURE_XCRYPT_EN)
+#define cpu_has_ace2		boot_cpu_has(X86_FEATURE_ACE2)
+#define cpu_has_ace2_enabled	boot_cpu_has(X86_FEATURE_ACE2_EN)
+#define cpu_has_phe		boot_cpu_has(X86_FEATURE_PHE)
+#define cpu_has_phe_enabled	boot_cpu_has(X86_FEATURE_PHE_EN)
+#define cpu_has_pmm		boot_cpu_has(X86_FEATURE_PMM)
+#define cpu_has_pmm_enabled	boot_cpu_has(X86_FEATURE_PMM_EN)
+#define cpu_has_ds		boot_cpu_has(X86_FEATURE_DS)
+#define cpu_has_pebs		boot_cpu_has(X86_FEATURE_PEBS)
+#define cpu_has_clflush		boot_cpu_has(X86_FEATURE_CLFLSH)
+#define cpu_has_bts		boot_cpu_has(X86_FEATURE_BTS)
+#define cpu_has_gbpages		boot_cpu_has(X86_FEATURE_GBPAGES)
+#define cpu_has_arch_perfmon	boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
+#define cpu_has_pat		boot_cpu_has(X86_FEATURE_PAT)
+#define cpu_has_xmm4_1		boot_cpu_has(X86_FEATURE_XMM4_1)
+#define cpu_has_xmm4_2		boot_cpu_has(X86_FEATURE_XMM4_2)
+#define cpu_has_x2apic		boot_cpu_has(X86_FEATURE_X2APIC)
+#define cpu_has_xsave		boot_cpu_has(X86_FEATURE_XSAVE)
+
+#if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
+# define cpu_has_invlpg		1
+#else
+# define cpu_has_invlpg		(boot_cpu_data.x86 > 3)
+#endif
+
+#ifdef CONFIG_X86_64
+
+#undef  cpu_has_vme
+#define cpu_has_vme		0
+
+#undef  cpu_has_pae
+#define cpu_has_pae		___BUG___
+
+#undef  cpu_has_mp
+#define cpu_has_mp		1
+
+#undef  cpu_has_k6_mtrr
+#define cpu_has_k6_mtrr		0
+
+#undef  cpu_has_cyrix_arr
+#define cpu_has_cyrix_arr	0
+
+#undef  cpu_has_centaur_mcr
+#define cpu_has_centaur_mcr	0
+
+#endif /* CONFIG_X86_64 */
+
+#endif /* defined(__KERNEL__) && !defined(__ASSEMBLY__) */
+
+#endif /* _ASM_X86_CPUFEATURE_H */
diff --git a/arch/x86/include/asm/cputime.h b/arch/x86/include/asm/cputime.h
new file mode 100644
index 0000000..6d68ad7
--- /dev/null
+++ b/arch/x86/include/asm/cputime.h
@@ -0,0 +1 @@
+#include <asm-generic/cputime.h>
diff --git a/arch/x86/include/asm/current.h b/arch/x86/include/asm/current.h
new file mode 100644
index 0000000..0930b4f
--- /dev/null
+++ b/arch/x86/include/asm/current.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_X86_CURRENT_H
+#define _ASM_X86_CURRENT_H
+
+#ifdef CONFIG_X86_32
+#include <linux/compiler.h>
+#include <asm/percpu.h>
+
+struct task_struct;
+
+DECLARE_PER_CPU(struct task_struct *, current_task);
+static __always_inline struct task_struct *get_current(void)
+{
+	return x86_read_percpu(current_task);
+}
+
+#else /* X86_32 */
+
+#ifndef __ASSEMBLY__
+#include <asm/pda.h>
+
+struct task_struct;
+
+static __always_inline struct task_struct *get_current(void)
+{
+	return read_pda(pcurrent);
+}
+
+#else /* __ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* X86_32 */
+
+#define current get_current()
+
+#endif /* _ASM_X86_CURRENT_H */
diff --git a/arch/x86/include/asm/debugreg.h b/arch/x86/include/asm/debugreg.h
new file mode 100644
index 0000000..3ea6f37
--- /dev/null
+++ b/arch/x86/include/asm/debugreg.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_X86_DEBUGREG_H
+#define _ASM_X86_DEBUGREG_H
+
+
+/* Indicate the register numbers for a number of the specific
+   debug registers.  Registers 0-3 contain the addresses we wish to trap on */
+#define DR_FIRSTADDR 0        /* u_debugreg[DR_FIRSTADDR] */
+#define DR_LASTADDR 3         /* u_debugreg[DR_LASTADDR]  */
+
+#define DR_STATUS 6           /* u_debugreg[DR_STATUS]     */
+#define DR_CONTROL 7          /* u_debugreg[DR_CONTROL] */
+
+/* Define a few things for the status register.  We can use this to determine
+   which debugging register was responsible for the trap.  The other bits
+   are either reserved or not of interest to us. */
+
+#define DR_TRAP0	(0x1)		/* db0 */
+#define DR_TRAP1	(0x2)		/* db1 */
+#define DR_TRAP2	(0x4)		/* db2 */
+#define DR_TRAP3	(0x8)		/* db3 */
+
+#define DR_STEP		(0x4000)	/* single-step */
+#define DR_SWITCH	(0x8000)	/* task switch */
+
+/* Now define a bunch of things for manipulating the control register.
+   The top two bytes of the control register consist of 4 fields of 4
+   bits - each field corresponds to one of the four debug registers,
+   and indicates what types of access we trap on, and how large the data
+   field is that we are looking at */
+
+#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
+#define DR_CONTROL_SIZE 4   /* 4 control bits per register */
+
+#define DR_RW_EXECUTE (0x0)   /* Settings for the access types to trap on */
+#define DR_RW_WRITE (0x1)
+#define DR_RW_READ (0x3)
+
+#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
+#define DR_LEN_2 (0x4)
+#define DR_LEN_4 (0xC)
+#define DR_LEN_8 (0x8)
+
+/* The low byte to the control register determine which registers are
+   enabled.  There are 4 fields of two bits.  One bit is "local", meaning
+   that the processor will reset the bit after a task switch and the other
+   is global meaning that we have to explicitly reset the bit.  With linux,
+   you can use either one, since we explicitly zero the register when we enter
+   kernel mode. */
+
+#define DR_LOCAL_ENABLE_SHIFT 0    /* Extra shift to the local enable bit */
+#define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
+#define DR_ENABLE_SIZE 2           /* 2 enable bits per register */
+
+#define DR_LOCAL_ENABLE_MASK (0x55)  /* Set  local bits for all 4 regs */
+#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
+
+/* The second byte to the control register has a few special things.
+   We can slow the instruction pipeline for instructions coming via the
+   gdt or the ldt if we want to.  I am not sure why this is an advantage */
+
+#ifdef __i386__
+#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
+#else
+#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */
+#endif
+
+#define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
+#define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
+
+#endif /* _ASM_X86_DEBUGREG_H */
diff --git a/arch/x86/include/asm/delay.h b/arch/x86/include/asm/delay.h
new file mode 100644
index 0000000..409a649
--- /dev/null
+++ b/arch/x86/include/asm/delay.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_X86_DELAY_H
+#define _ASM_X86_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/x86/lib/delay.c
+ */
+
+/* Undefined functions to get compile-time errors */
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long xloops);
+extern void __delay(unsigned long loops);
+
+/* 0x10c7 is 2**32 / 1000000 (rounded up) */
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
+	__udelay(n))
+
+/* 0x5 is 2**32 / 1000000000 (rounded up) */
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+	__ndelay(n))
+
+void use_tsc_delay(void);
+
+#endif /* _ASM_X86_DELAY_H */
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
new file mode 100644
index 0000000..e6b82b17
--- /dev/null
+++ b/arch/x86/include/asm/desc.h
@@ -0,0 +1,409 @@
+#ifndef _ASM_X86_DESC_H
+#define _ASM_X86_DESC_H
+
+#ifndef __ASSEMBLY__
+#include <asm/desc_defs.h>
+#include <asm/ldt.h>
+#include <asm/mmu.h>
+#include <linux/smp.h>
+
+static inline void fill_ldt(struct desc_struct *desc,
+			    const struct user_desc *info)
+{
+	desc->limit0 = info->limit & 0x0ffff;
+	desc->base0 = info->base_addr & 0x0000ffff;
+
+	desc->base1 = (info->base_addr & 0x00ff0000) >> 16;
+	desc->type = (info->read_exec_only ^ 1) << 1;
+	desc->type |= info->contents << 2;
+	desc->s = 1;
+	desc->dpl = 0x3;
+	desc->p = info->seg_not_present ^ 1;
+	desc->limit = (info->limit & 0xf0000) >> 16;
+	desc->avl = info->useable;
+	desc->d = info->seg_32bit;
+	desc->g = info->limit_in_pages;
+	desc->base2 = (info->base_addr & 0xff000000) >> 24;
+	/*
+	 * Don't allow setting of the lm bit. It is useless anyway
+	 * because 64bit system calls require __USER_CS:
+	 */
+	desc->l = 0;
+}
+
+extern struct desc_ptr idt_descr;
+extern gate_desc idt_table[];
+
+struct gdt_page {
+	struct desc_struct gdt[GDT_ENTRIES];
+} __attribute__((aligned(PAGE_SIZE)));
+DECLARE_PER_CPU(struct gdt_page, gdt_page);
+
+static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
+{
+	return per_cpu(gdt_page, cpu).gdt;
+}
+
+#ifdef CONFIG_X86_64
+
+static inline void pack_gate(gate_desc *gate, unsigned type, unsigned long func,
+			     unsigned dpl, unsigned ist, unsigned seg)
+{
+	gate->offset_low = PTR_LOW(func);
+	gate->segment = __KERNEL_CS;
+	gate->ist = ist;
+	gate->p = 1;
+	gate->dpl = dpl;
+	gate->zero0 = 0;
+	gate->zero1 = 0;
+	gate->type = type;
+	gate->offset_middle = PTR_MIDDLE(func);
+	gate->offset_high = PTR_HIGH(func);
+}
+
+#else
+static inline void pack_gate(gate_desc *gate, unsigned char type,
+			     unsigned long base, unsigned dpl, unsigned flags,
+			     unsigned short seg)
+{
+	gate->a = (seg << 16) | (base & 0xffff);
+	gate->b = (base & 0xffff0000) |
+		  (((0x80 | type | (dpl << 5)) & 0xff) << 8);
+}
+
+#endif
+
+static inline int desc_empty(const void *ptr)
+{
+	const u32 *desc = ptr;
+	return !(desc[0] | desc[1]);
+}
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define load_TR_desc() native_load_tr_desc()
+#define load_gdt(dtr) native_load_gdt(dtr)
+#define load_idt(dtr) native_load_idt(dtr)
+#define load_tr(tr) asm volatile("ltr %0"::"m" (tr))
+#define load_ldt(ldt) asm volatile("lldt %0"::"m" (ldt))
+
+#define store_gdt(dtr) native_store_gdt(dtr)
+#define store_idt(dtr) native_store_idt(dtr)
+#define store_tr(tr) (tr = native_store_tr())
+#define store_ldt(ldt) asm("sldt %0":"=m" (ldt))
+
+#define load_TLS(t, cpu) native_load_tls(t, cpu)
+#define set_ldt native_set_ldt
+
+#define write_ldt_entry(dt, entry, desc)	\
+	native_write_ldt_entry(dt, entry, desc)
+#define write_gdt_entry(dt, entry, desc, type)		\
+	native_write_gdt_entry(dt, entry, desc, type)
+#define write_idt_entry(dt, entry, g)		\
+	native_write_idt_entry(dt, entry, g)
+
+static inline void paravirt_alloc_ldt(struct desc_struct *ldt, unsigned entries)
+{
+}
+
+static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
+{
+}
+#endif	/* CONFIG_PARAVIRT */
+
+static inline void native_write_idt_entry(gate_desc *idt, int entry,
+					  const gate_desc *gate)
+{
+	memcpy(&idt[entry], gate, sizeof(*gate));
+}
+
+static inline void native_write_ldt_entry(struct desc_struct *ldt, int entry,
+					  const void *desc)
+{
+	memcpy(&ldt[entry], desc, 8);
+}
+
+static inline void native_write_gdt_entry(struct desc_struct *gdt, int entry,
+					  const void *desc, int type)
+{
+	unsigned int size;
+	switch (type) {
+	case DESC_TSS:
+		size = sizeof(tss_desc);
+		break;
+	case DESC_LDT:
+		size = sizeof(ldt_desc);
+		break;
+	default:
+		size = sizeof(struct desc_struct);
+		break;
+	}
+	memcpy(&gdt[entry], desc, size);
+}
+
+static inline void pack_descriptor(struct desc_struct *desc, unsigned long base,
+				   unsigned long limit, unsigned char type,
+				   unsigned char flags)
+{
+	desc->a = ((base & 0xffff) << 16) | (limit & 0xffff);
+	desc->b = (base & 0xff000000) | ((base & 0xff0000) >> 16) |
+		(limit & 0x000f0000) | ((type & 0xff) << 8) |
+		((flags & 0xf) << 20);
+	desc->p = 1;
+}
+
+
+static inline void set_tssldt_descriptor(void *d, unsigned long addr,
+					 unsigned type, unsigned size)
+{
+#ifdef CONFIG_X86_64
+	struct ldttss_desc64 *desc = d;
+	memset(desc, 0, sizeof(*desc));
+	desc->limit0 = size & 0xFFFF;
+	desc->base0 = PTR_LOW(addr);
+	desc->base1 = PTR_MIDDLE(addr) & 0xFF;
+	desc->type = type;
+	desc->p = 1;
+	desc->limit1 = (size >> 16) & 0xF;
+	desc->base2 = (PTR_MIDDLE(addr) >> 8) & 0xFF;
+	desc->base3 = PTR_HIGH(addr);
+#else
+	pack_descriptor((struct desc_struct *)d, addr, size, 0x80 | type, 0);
+#endif
+}
+
+static inline void __set_tss_desc(unsigned cpu, unsigned int entry, void *addr)
+{
+	struct desc_struct *d = get_cpu_gdt_table(cpu);
+	tss_desc tss;
+
+	/*
+	 * sizeof(unsigned long) coming from an extra "long" at the end
+	 * of the iobitmap. See tss_struct definition in processor.h
+	 *
+	 * -1? seg base+limit should be pointing to the address of the
+	 * last valid byte
+	 */
+	set_tssldt_descriptor(&tss, (unsigned long)addr, DESC_TSS,
+			      IO_BITMAP_OFFSET + IO_BITMAP_BYTES +
+			      sizeof(unsigned long) - 1);
+	write_gdt_entry(d, entry, &tss, DESC_TSS);
+}
+
+#define set_tss_desc(cpu, addr) __set_tss_desc(cpu, GDT_ENTRY_TSS, addr)
+
+static inline void native_set_ldt(const void *addr, unsigned int entries)
+{
+	if (likely(entries == 0))
+		asm volatile("lldt %w0"::"q" (0));
+	else {
+		unsigned cpu = smp_processor_id();
+		ldt_desc ldt;
+
+		set_tssldt_descriptor(&ldt, (unsigned long)addr, DESC_LDT,
+				      entries * LDT_ENTRY_SIZE - 1);
+		write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT,
+				&ldt, DESC_LDT);
+		asm volatile("lldt %w0"::"q" (GDT_ENTRY_LDT*8));
+	}
+}
+
+static inline void native_load_tr_desc(void)
+{
+	asm volatile("ltr %w0"::"q" (GDT_ENTRY_TSS*8));
+}
+
+static inline void native_load_gdt(const struct desc_ptr *dtr)
+{
+	asm volatile("lgdt %0"::"m" (*dtr));
+}
+
+static inline void native_load_idt(const struct desc_ptr *dtr)
+{
+	asm volatile("lidt %0"::"m" (*dtr));
+}
+
+static inline void native_store_gdt(struct desc_ptr *dtr)
+{
+	asm volatile("sgdt %0":"=m" (*dtr));
+}
+
+static inline void native_store_idt(struct desc_ptr *dtr)
+{
+	asm volatile("sidt %0":"=m" (*dtr));
+}
+
+static inline unsigned long native_store_tr(void)
+{
+	unsigned long tr;
+	asm volatile("str %0":"=r" (tr));
+	return tr;
+}
+
+static inline void native_load_tls(struct thread_struct *t, unsigned int cpu)
+{
+	unsigned int i;
+	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+
+	for (i = 0; i < GDT_ENTRY_TLS_ENTRIES; i++)
+		gdt[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i];
+}
+
+#define _LDT_empty(info)				\
+	((info)->base_addr		== 0	&&	\
+	 (info)->limit			== 0	&&	\
+	 (info)->contents		== 0	&&	\
+	 (info)->read_exec_only		== 1	&&	\
+	 (info)->seg_32bit		== 0	&&	\
+	 (info)->limit_in_pages		== 0	&&	\
+	 (info)->seg_not_present	== 1	&&	\
+	 (info)->useable		== 0)
+
+#ifdef CONFIG_X86_64
+#define LDT_empty(info) (_LDT_empty(info) && ((info)->lm == 0))
+#else
+#define LDT_empty(info) (_LDT_empty(info))
+#endif
+
+static inline void clear_LDT(void)
+{
+	set_ldt(NULL, 0);
+}
+
+/*
+ * load one particular LDT into the current CPU
+ */
+static inline void load_LDT_nolock(mm_context_t *pc)
+{
+	set_ldt(pc->ldt, pc->size);
+}
+
+static inline void load_LDT(mm_context_t *pc)
+{
+	preempt_disable();
+	load_LDT_nolock(pc);
+	preempt_enable();
+}
+
+static inline unsigned long get_desc_base(const struct desc_struct *desc)
+{
+	return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24);
+}
+
+static inline unsigned long get_desc_limit(const struct desc_struct *desc)
+{
+	return desc->limit0 | (desc->limit << 16);
+}
+
+static inline void _set_gate(int gate, unsigned type, void *addr,
+			     unsigned dpl, unsigned ist, unsigned seg)
+{
+	gate_desc s;
+	pack_gate(&s, type, (unsigned long)addr, dpl, ist, seg);
+	/*
+	 * does not need to be atomic because it is only done once at
+	 * setup time
+	 */
+	write_idt_entry(idt_table, gate, &s);
+}
+
+/*
+ * This needs to use 'idt_table' rather than 'idt', and
+ * thus use the _nonmapped_ version of the IDT, as the
+ * Pentium F0 0F bugfix can have resulted in the mapped
+ * IDT being write-protected.
+ */
+static inline void set_intr_gate(unsigned int n, void *addr)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_INTERRUPT, addr, 0, 0, __KERNEL_CS);
+}
+
+#define SYS_VECTOR_FREE		0
+#define SYS_VECTOR_ALLOCED	1
+
+extern int first_system_vector;
+extern char system_vectors[];
+
+static inline void alloc_system_vector(int vector)
+{
+	if (system_vectors[vector] == SYS_VECTOR_FREE) {
+		system_vectors[vector] = SYS_VECTOR_ALLOCED;
+		if (first_system_vector > vector)
+			first_system_vector = vector;
+	} else
+		BUG();
+}
+
+static inline void alloc_intr_gate(unsigned int n, void *addr)
+{
+	alloc_system_vector(n);
+	set_intr_gate(n, addr);
+}
+
+/*
+ * This routine sets up an interrupt gate at directory privilege level 3.
+ */
+static inline void set_system_intr_gate(unsigned int n, void *addr)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_INTERRUPT, addr, 0x3, 0, __KERNEL_CS);
+}
+
+static inline void set_system_trap_gate(unsigned int n, void *addr)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_TRAP, addr, 0x3, 0, __KERNEL_CS);
+}
+
+static inline void set_trap_gate(unsigned int n, void *addr)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_TRAP, addr, 0, 0, __KERNEL_CS);
+}
+
+static inline void set_task_gate(unsigned int n, unsigned int gdt_entry)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_TASK, (void *)0, 0, 0, (gdt_entry<<3));
+}
+
+static inline void set_intr_gate_ist(int n, void *addr, unsigned ist)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_INTERRUPT, addr, 0, ist, __KERNEL_CS);
+}
+
+static inline void set_system_intr_gate_ist(int n, void *addr, unsigned ist)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_INTERRUPT, addr, 0x3, ist, __KERNEL_CS);
+}
+
+#else
+/*
+ * GET_DESC_BASE reads the descriptor base of the specified segment.
+ *
+ * Args:
+ *    idx - descriptor index
+ *    gdt - GDT pointer
+ *    base - 32bit register to which the base will be written
+ *    lo_w - lo word of the "base" register
+ *    lo_b - lo byte of the "base" register
+ *    hi_b - hi byte of the low word of the "base" register
+ *
+ * Example:
+ *    GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah)
+ *    Will read the base address of GDT_ENTRY_ESPFIX_SS and put it into %eax.
+ */
+#define GET_DESC_BASE(idx, gdt, base, lo_w, lo_b, hi_b) \
+	movb idx * 8 + 4(gdt), lo_b;			\
+	movb idx * 8 + 7(gdt), hi_b;			\
+	shll $16, base;					\
+	movw idx * 8 + 2(gdt), lo_w;
+
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_DESC_H */
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
new file mode 100644
index 0000000..a6adefa
--- /dev/null
+++ b/arch/x86/include/asm/desc_defs.h
@@ -0,0 +1,95 @@
+/* Written 2000 by Andi Kleen */
+#ifndef _ASM_X86_DESC_DEFS_H
+#define _ASM_X86_DESC_DEFS_H
+
+/*
+ * Segment descriptor structure definitions, usable from both x86_64 and i386
+ * archs.
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/*
+ * FIXME: Acessing the desc_struct through its fields is more elegant,
+ * and should be the one valid thing to do. However, a lot of open code
+ * still touches the a and b acessors, and doing this allow us to do it
+ * incrementally. We keep the signature as a struct, rather than an union,
+ * so we can get rid of it transparently in the future -- glommer
+ */
+/* 8 byte segment descriptor */
+struct desc_struct {
+	union {
+		struct {
+			unsigned int a;
+			unsigned int b;
+		};
+		struct {
+			u16 limit0;
+			u16 base0;
+			unsigned base1: 8, type: 4, s: 1, dpl: 2, p: 1;
+			unsigned limit: 4, avl: 1, l: 1, d: 1, g: 1, base2: 8;
+		};
+	};
+} __attribute__((packed));
+
+enum {
+	GATE_INTERRUPT = 0xE,
+	GATE_TRAP = 0xF,
+	GATE_CALL = 0xC,
+	GATE_TASK = 0x5,
+};
+
+/* 16byte gate */
+struct gate_struct64 {
+	u16 offset_low;
+	u16 segment;
+	unsigned ist : 3, zero0 : 5, type : 5, dpl : 2, p : 1;
+	u16 offset_middle;
+	u32 offset_high;
+	u32 zero1;
+} __attribute__((packed));
+
+#define PTR_LOW(x) ((unsigned long long)(x) & 0xFFFF)
+#define PTR_MIDDLE(x) (((unsigned long long)(x) >> 16) & 0xFFFF)
+#define PTR_HIGH(x) ((unsigned long long)(x) >> 32)
+
+enum {
+	DESC_TSS = 0x9,
+	DESC_LDT = 0x2,
+	DESCTYPE_S = 0x10,	/* !system */
+};
+
+/* LDT or TSS descriptor in the GDT. 16 bytes. */
+struct ldttss_desc64 {
+	u16 limit0;
+	u16 base0;
+	unsigned base1 : 8, type : 5, dpl : 2, p : 1;
+	unsigned limit1 : 4, zero0 : 3, g : 1, base2 : 8;
+	u32 base3;
+	u32 zero1;
+} __attribute__((packed));
+
+#ifdef CONFIG_X86_64
+typedef struct gate_struct64 gate_desc;
+typedef struct ldttss_desc64 ldt_desc;
+typedef struct ldttss_desc64 tss_desc;
+#define gate_offset(g) ((g).offset_low | ((unsigned long)(g).offset_middle << 16) | ((unsigned long)(g).offset_high << 32))
+#define gate_segment(g) ((g).segment)
+#else
+typedef struct desc_struct gate_desc;
+typedef struct desc_struct ldt_desc;
+typedef struct desc_struct tss_desc;
+#define gate_offset(g)		(((g).b & 0xffff0000) | ((g).a & 0x0000ffff))
+#define gate_segment(g)		((g).a >> 16)
+#endif
+
+struct desc_ptr {
+	unsigned short size;
+	unsigned long address;
+} __attribute__((packed)) ;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_DESC_DEFS_H */
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
new file mode 100644
index 0000000..3c034f4
--- /dev/null
+++ b/arch/x86/include/asm/device.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_X86_DEVICE_H
+#define _ASM_X86_DEVICE_H
+
+struct dev_archdata {
+#ifdef CONFIG_ACPI
+	void	*acpi_handle;
+#endif
+#ifdef CONFIG_X86_64
+struct dma_mapping_ops *dma_ops;
+#endif
+#ifdef CONFIG_DMAR
+	void *iommu; /* hook for IOMMU specific extension */
+#endif
+};
+
+#endif /* _ASM_X86_DEVICE_H */
diff --git a/arch/x86/include/asm/div64.h b/arch/x86/include/asm/div64.h
new file mode 100644
index 0000000..9a2d644
--- /dev/null
+++ b/arch/x86/include/asm/div64.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_X86_DIV64_H
+#define _ASM_X86_DIV64_H
+
+#ifdef CONFIG_X86_32
+
+#include <linux/types.h>
+
+/*
+ * do_div() is NOT a C function. It wants to return
+ * two values (the quotient and the remainder), but
+ * since that doesn't work very well in C, what it
+ * does is:
+ *
+ * - modifies the 64-bit dividend _in_place_
+ * - returns the 32-bit remainder
+ *
+ * This ends up being the most efficient "calling
+ * convention" on x86.
+ */
+#define do_div(n, base)						\
+({								\
+	unsigned long __upper, __low, __high, __mod, __base;	\
+	__base = (base);					\
+	asm("":"=a" (__low), "=d" (__high) : "A" (n));		\
+	__upper = __high;					\
+	if (__high) {						\
+		__upper = __high % (__base);			\
+		__high = __high / (__base);			\
+	}							\
+	asm("divl %2":"=a" (__low), "=d" (__mod)		\
+	    : "rm" (__base), "0" (__low), "1" (__upper));	\
+	asm("":"=A" (n) : "a" (__low), "d" (__high));		\
+	__mod;							\
+})
+
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
+{
+	union {
+		u64 v64;
+		u32 v32[2];
+	} d = { dividend };
+	u32 upper;
+
+	upper = d.v32[1];
+	d.v32[1] = 0;
+	if (upper >= divisor) {
+		d.v32[1] = upper / divisor;
+		upper %= divisor;
+	}
+	asm ("divl %2" : "=a" (d.v32[0]), "=d" (*remainder) :
+		"rm" (divisor), "0" (d.v32[0]), "1" (upper));
+	return d.v64;
+}
+#define div_u64_rem	div_u64_rem
+
+#else
+# include <asm-generic/div64.h>
+#endif /* CONFIG_X86_32 */
+
+#endif /* _ASM_X86_DIV64_H */
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
new file mode 100644
index 0000000..4a5397b
--- /dev/null
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -0,0 +1,308 @@
+#ifndef _ASM_X86_DMA_MAPPING_H
+#define _ASM_X86_DMA_MAPPING_H
+
+/*
+ * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for
+ * documentation.
+ */
+
+#include <linux/scatterlist.h>
+#include <asm/io.h>
+#include <asm/swiotlb.h>
+#include <asm-generic/dma-coherent.h>
+
+extern dma_addr_t bad_dma_address;
+extern int iommu_merge;
+extern struct device x86_dma_fallback_dev;
+extern int panic_on_overflow;
+
+struct dma_mapping_ops {
+	int             (*mapping_error)(struct device *dev,
+					 dma_addr_t dma_addr);
+	void*           (*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t gfp);
+	void            (*free_coherent)(struct device *dev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+	dma_addr_t      (*map_single)(struct device *hwdev, phys_addr_t ptr,
+				size_t size, int direction);
+	void            (*unmap_single)(struct device *dev, dma_addr_t addr,
+				size_t size, int direction);
+	void            (*sync_single_for_cpu)(struct device *hwdev,
+				dma_addr_t dma_handle, size_t size,
+				int direction);
+	void            (*sync_single_for_device)(struct device *hwdev,
+				dma_addr_t dma_handle, size_t size,
+				int direction);
+	void            (*sync_single_range_for_cpu)(struct device *hwdev,
+				dma_addr_t dma_handle, unsigned long offset,
+				size_t size, int direction);
+	void            (*sync_single_range_for_device)(struct device *hwdev,
+				dma_addr_t dma_handle, unsigned long offset,
+				size_t size, int direction);
+	void            (*sync_sg_for_cpu)(struct device *hwdev,
+				struct scatterlist *sg, int nelems,
+				int direction);
+	void            (*sync_sg_for_device)(struct device *hwdev,
+				struct scatterlist *sg, int nelems,
+				int direction);
+	int             (*map_sg)(struct device *hwdev, struct scatterlist *sg,
+				int nents, int direction);
+	void            (*unmap_sg)(struct device *hwdev,
+				struct scatterlist *sg, int nents,
+				int direction);
+	int             (*dma_supported)(struct device *hwdev, u64 mask);
+	int		is_phys;
+};
+
+extern struct dma_mapping_ops *dma_ops;
+
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+{
+#ifdef CONFIG_X86_32
+	return dma_ops;
+#else
+	if (unlikely(!dev) || !dev->archdata.dma_ops)
+		return dma_ops;
+	else
+		return dev->archdata.dma_ops;
+#endif /* _ASM_X86_DMA_MAPPING_H */
+}
+
+/* Make sure we keep the same behaviour */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+#ifdef CONFIG_X86_32
+	return 0;
+#else
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+	if (ops->mapping_error)
+		return ops->mapping_error(dev, dma_addr);
+
+	return (dma_addr == bad_dma_address);
+#endif
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)	(1)
+
+extern int dma_supported(struct device *hwdev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 mask);
+
+extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
+					dma_addr_t *dma_addr, gfp_t flag);
+
+static inline dma_addr_t
+dma_map_single(struct device *hwdev, void *ptr, size_t size,
+	       int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	return ops->map_single(hwdev, virt_to_phys(ptr), size, direction);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t addr, size_t size,
+		 int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->unmap_single)
+		ops->unmap_single(dev, addr, size, direction);
+}
+
+static inline int
+dma_map_sg(struct device *hwdev, struct scatterlist *sg,
+	   int nents, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	return ops->map_sg(hwdev, sg, nents, direction);
+}
+
+static inline void
+dma_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
+	     int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->unmap_sg)
+		ops->unmap_sg(hwdev, sg, nents, direction);
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
+			size_t size, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_for_cpu)
+		ops->sync_single_for_cpu(hwdev, dma_handle, size, direction);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_single_for_device(struct device *hwdev, dma_addr_t dma_handle,
+			   size_t size, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_for_device)
+		ops->sync_single_for_device(hwdev, dma_handle, size, direction);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
+			      unsigned long offset, size_t size, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_range_for_cpu)
+		ops->sync_single_range_for_cpu(hwdev, dma_handle, offset,
+					       size, direction);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *hwdev, dma_addr_t dma_handle,
+				 unsigned long offset, size_t size,
+				 int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_range_for_device)
+		ops->sync_single_range_for_device(hwdev, dma_handle,
+						  offset, size, direction);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
+		    int nelems, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_sg_for_cpu)
+		ops->sync_sg_for_cpu(hwdev, sg, nelems, direction);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
+		       int nelems, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_sg_for_device)
+		ops->sync_sg_for_device(hwdev, sg, nelems, direction);
+
+	flush_write_buffers();
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      size_t offset, size_t size,
+				      int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	return ops->map_single(dev, page_to_phys(page) + offset,
+			       size, direction);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
+				  size_t size, int direction)
+{
+	dma_unmap_single(dev, addr, size, direction);
+}
+
+static inline void
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	enum dma_data_direction dir)
+{
+	flush_write_buffers();
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	/* no easy way to get cache size on all x86, so return the
+	 * maximum possible, to be safe */
+	return boot_cpu_data.x86_clflush_size;
+}
+
+static inline unsigned long dma_alloc_coherent_mask(struct device *dev,
+						    gfp_t gfp)
+{
+	unsigned long dma_mask = 0;
+
+	dma_mask = dev->coherent_dma_mask;
+	if (!dma_mask)
+		dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK;
+
+	return dma_mask;
+}
+
+static inline gfp_t dma_alloc_coherent_gfp_flags(struct device *dev, gfp_t gfp)
+{
+#ifdef CONFIG_X86_64
+	unsigned long dma_mask = dma_alloc_coherent_mask(dev, gfp);
+
+	if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA))
+		gfp |= GFP_DMA32;
+#endif
+       return gfp;
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		gfp_t gfp)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+	void *memory;
+
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
+		return memory;
+
+	if (!dev) {
+		dev = &x86_dma_fallback_dev;
+		gfp |= GFP_DMA;
+	}
+
+	if (!is_device_dma_capable(dev))
+		return NULL;
+
+	if (!ops->alloc_coherent)
+		return NULL;
+
+	return ops->alloc_coherent(dev, size, dma_handle,
+				   dma_alloc_coherent_gfp_flags(dev, gfp));
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *vaddr, dma_addr_t bus)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+	WARN_ON(irqs_disabled());       /* for portability */
+
+	if (dma_release_from_coherent(dev, get_order(size), vaddr))
+		return;
+
+	if (ops->free_coherent)
+		ops->free_coherent(dev, size, vaddr, bus);
+}
+
+#endif
diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h
new file mode 100644
index 0000000..ca1098a
--- /dev/null
+++ b/arch/x86/include/asm/dma.h
@@ -0,0 +1,318 @@
+/*
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_X86_DMA_H
+#define _ASM_X86_DMA_H
+
+#include <linux/spinlock.h>	/* And spinlocks */
+#include <asm/io.h>		/* need byte IO */
+#include <linux/delay.h>
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#define MAX_DMA_CHANNELS	8
+
+#ifdef CONFIG_X86_32
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+#define MAX_DMA_ADDRESS      (PAGE_OFFSET + 0x1000000)
+
+#else
+
+/* 16MB ISA DMA zone */
+#define MAX_DMA_PFN   ((16 * 1024 * 1024) >> PAGE_SHIFT)
+
+/* 4GB broken PCI/AGP hardware bus master zone */
+#define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
+
+/* Compat define for old dma zone */
+#define MAX_DMA_ADDRESS ((unsigned long)__va(MAX_DMA_PFN << PAGE_SHIFT))
+
+#endif
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG		0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG		0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG		0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG		0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+
+#define DMA_ADDR_0		0x00    /* DMA address registers */
+#define DMA_ADDR_1		0x02
+#define DMA_ADDR_2		0x04
+#define DMA_ADDR_3		0x06
+#define DMA_ADDR_4		0xC0
+#define DMA_ADDR_5		0xC4
+#define DMA_ADDR_6		0xC8
+#define DMA_ADDR_7		0xCC
+
+#define DMA_CNT_0		0x01    /* DMA count registers */
+#define DMA_CNT_1		0x03
+#define DMA_CNT_2		0x05
+#define DMA_CNT_3		0x07
+#define DMA_CNT_4		0xC2
+#define DMA_CNT_5		0xC6
+#define DMA_CNT_6		0xCA
+#define DMA_CNT_7		0xCE
+
+#define DMA_PAGE_0		0x87    /* DMA page registers */
+#define DMA_PAGE_1		0x83
+#define DMA_PAGE_2		0x81
+#define DMA_PAGE_3		0x82
+#define DMA_PAGE_5		0x8B
+#define DMA_PAGE_6		0x89
+#define DMA_PAGE_7		0x8A
+
+/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_READ		0x44
+/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE		0x48
+/* pass thru DREQ->HRQ, DACK<-HLDA only */
+#define DMA_MODE_CASCADE	0xC0
+
+#define DMA_AUTOINIT		0x10
+
+
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static inline void enable_dma(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(dmanr, DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3, DMA2_MASK_REG);
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(dmanr | 4, DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(0, DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr <= 3)
+		dma_outb(mode | dmanr, DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+	switch (dmanr) {
+	case 0:
+		dma_outb(pagenr, DMA_PAGE_0);
+		break;
+	case 1:
+		dma_outb(pagenr, DMA_PAGE_1);
+		break;
+	case 2:
+		dma_outb(pagenr, DMA_PAGE_2);
+		break;
+	case 3:
+		dma_outb(pagenr, DMA_PAGE_3);
+		break;
+	case 5:
+		dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+		break;
+	case 6:
+		dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+		break;
+	case 7:
+		dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+		break;
+	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	set_dma_page(dmanr, a>>16);
+	if (dmanr <= 3)  {
+		dma_outb(a & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
+		dma_outb((a >> 8) & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
+	}  else  {
+		dma_outb((a >> 1) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((a >> 9) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+	}
+}
+
+
+/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	count--;
+	if (dmanr <= 3)  {
+		dma_outb(count & 0xff, ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+		dma_outb((count >> 8) & 0xff,
+			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+	} else {
+		dma_outb((count >> 1) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+		dma_outb((count >> 9) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+	}
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port;
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	io_port = (dmanr <= 3) ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
+		: ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr <= 3) ? count : (count << 1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* _ASM_X86_DMA_H */
diff --git a/arch/x86/include/asm/dmi.h b/arch/x86/include/asm/dmi.h
new file mode 100644
index 0000000..bc68212
--- /dev/null
+++ b/arch/x86/include/asm/dmi.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_X86_DMI_H
+#define _ASM_X86_DMI_H
+
+#include <asm/io.h>
+
+#define DMI_MAX_DATA 2048
+
+extern int dmi_alloc_index;
+extern char dmi_alloc_data[DMI_MAX_DATA];
+
+/* This is so early that there is no good way to allocate dynamic memory.
+   Allocate data in an BSS array. */
+static inline void *dmi_alloc(unsigned len)
+{
+	int idx = dmi_alloc_index;
+	if ((dmi_alloc_index + len) > DMI_MAX_DATA)
+		return NULL;
+	dmi_alloc_index += len;
+	return dmi_alloc_data + idx;
+}
+
+/* Use early IO mappings for DMI because it's initialized early */
+#define dmi_ioremap early_ioremap
+#define dmi_iounmap early_iounmap
+
+#endif /* _ASM_X86_DMI_H */
diff --git a/arch/x86/include/asm/ds.h b/arch/x86/include/asm/ds.h
new file mode 100644
index 0000000..72c5a19
--- /dev/null
+++ b/arch/x86/include/asm/ds.h
@@ -0,0 +1,238 @@
+/*
+ * Debug Store (DS) support
+ *
+ * This provides a low-level interface to the hardware's Debug Store
+ * feature that is used for branch trace store (BTS) and
+ * precise-event based sampling (PEBS).
+ *
+ * It manages:
+ * - per-thread and per-cpu allocation of BTS and PEBS
+ * - buffer memory allocation (optional)
+ * - buffer overflow handling
+ * - buffer access
+ *
+ * It assumes:
+ * - get_task_struct on all parameter tasks
+ * - current is allowed to trace parameter tasks
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation.
+ * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
+ */
+
+#ifndef _ASM_X86_DS_H
+#define _ASM_X86_DS_H
+
+#ifdef CONFIG_X86_DS
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+
+struct task_struct;
+
+/*
+ * Request BTS or PEBS
+ *
+ * Due to alignement constraints, the actual buffer may be slightly
+ * smaller than the requested or provided buffer.
+ *
+ * Returns 0 on success; -Eerrno otherwise
+ *
+ * task: the task to request recording for;
+ *       NULL for per-cpu recording on the current cpu
+ * base: the base pointer for the (non-pageable) buffer;
+ *       NULL if buffer allocation requested
+ * size: the size of the requested or provided buffer
+ * ovfl: pointer to a function to be called on buffer overflow;
+ *       NULL if cyclic buffer requested
+ */
+typedef void (*ds_ovfl_callback_t)(struct task_struct *);
+extern int ds_request_bts(struct task_struct *task, void *base, size_t size,
+			  ds_ovfl_callback_t ovfl);
+extern int ds_request_pebs(struct task_struct *task, void *base, size_t size,
+			   ds_ovfl_callback_t ovfl);
+
+/*
+ * Release BTS or PEBS resources
+ *
+ * Frees buffers allocated on ds_request.
+ *
+ * Returns 0 on success; -Eerrno otherwise
+ *
+ * task: the task to release resources for;
+ *       NULL to release resources for the current cpu
+ */
+extern int ds_release_bts(struct task_struct *task);
+extern int ds_release_pebs(struct task_struct *task);
+
+/*
+ * Return the (array) index of the write pointer.
+ * (assuming an array of BTS/PEBS records)
+ *
+ * Returns -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * pos (out): if not NULL, will hold the result
+ */
+extern int ds_get_bts_index(struct task_struct *task, size_t *pos);
+extern int ds_get_pebs_index(struct task_struct *task, size_t *pos);
+
+/*
+ * Return the (array) index one record beyond the end of the array.
+ * (assuming an array of BTS/PEBS records)
+ *
+ * Returns -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * pos (out): if not NULL, will hold the result
+ */
+extern int ds_get_bts_end(struct task_struct *task, size_t *pos);
+extern int ds_get_pebs_end(struct task_struct *task, size_t *pos);
+
+/*
+ * Provide a pointer to the BTS/PEBS record at parameter index.
+ * (assuming an array of BTS/PEBS records)
+ *
+ * The pointer points directly into the buffer. The user is
+ * responsible for copying the record.
+ *
+ * Returns the size of a single record on success; -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * index: the index of the requested record
+ * record (out): pointer to the requested record
+ */
+extern int ds_access_bts(struct task_struct *task,
+			 size_t index, const void **record);
+extern int ds_access_pebs(struct task_struct *task,
+			  size_t index, const void **record);
+
+/*
+ * Write one or more BTS/PEBS records at the write pointer index and
+ * advance the write pointer.
+ *
+ * If size is not a multiple of the record size, trailing bytes are
+ * zeroed out.
+ *
+ * May result in one or more overflow notifications.
+ *
+ * If called during overflow handling, that is, with index >=
+ * interrupt threshold, the write will wrap around.
+ *
+ * An overflow notification is given if and when the interrupt
+ * threshold is reached during or after the write.
+ *
+ * Returns the number of bytes written or -Eerrno.
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * buffer: the buffer to write
+ * size: the size of the buffer
+ */
+extern int ds_write_bts(struct task_struct *task,
+			const void *buffer, size_t size);
+extern int ds_write_pebs(struct task_struct *task,
+			 const void *buffer, size_t size);
+
+/*
+ * Same as ds_write_bts/pebs, but omit ownership checks.
+ *
+ * This is needed to have some other task than the owner of the
+ * BTS/PEBS buffer or the parameter task itself write into the
+ * respective buffer.
+ */
+extern int ds_unchecked_write_bts(struct task_struct *task,
+				  const void *buffer, size_t size);
+extern int ds_unchecked_write_pebs(struct task_struct *task,
+				   const void *buffer, size_t size);
+
+/*
+ * Reset the write pointer of the BTS/PEBS buffer.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ */
+extern int ds_reset_bts(struct task_struct *task);
+extern int ds_reset_pebs(struct task_struct *task);
+
+/*
+ * Clear the BTS/PEBS buffer and reset the write pointer.
+ * The entire buffer will be zeroed out.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ */
+extern int ds_clear_bts(struct task_struct *task);
+extern int ds_clear_pebs(struct task_struct *task);
+
+/*
+ * Provide the PEBS counter reset value.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * value (out): the counter reset value
+ */
+extern int ds_get_pebs_reset(struct task_struct *task, u64 *value);
+
+/*
+ * Set the PEBS counter reset value.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * value: the new counter reset value
+ */
+extern int ds_set_pebs_reset(struct task_struct *task, u64 value);
+
+/*
+ * Initialization
+ */
+struct cpuinfo_x86;
+extern void __cpuinit ds_init_intel(struct cpuinfo_x86 *);
+
+
+
+/*
+ * The DS context - part of struct thread_struct.
+ */
+struct ds_context {
+	/* pointer to the DS configuration; goes into MSR_IA32_DS_AREA */
+	unsigned char *ds;
+	/* the owner of the BTS and PEBS configuration, respectively */
+	struct task_struct *owner[2];
+	/* buffer overflow notification function for BTS and PEBS */
+	ds_ovfl_callback_t callback[2];
+	/* the original buffer address */
+	void *buffer[2];
+	/* the number of allocated pages for on-request allocated buffers */
+	unsigned int pages[2];
+	/* use count */
+	unsigned long count;
+	/* a pointer to the context location inside the thread_struct
+	 * or the per_cpu context array */
+	struct ds_context **this;
+	/* a pointer to the task owning this context, or NULL, if the
+	 * context is owned by a cpu */
+	struct task_struct *task;
+};
+
+/* called by exit_thread() to free leftover contexts */
+extern void ds_free(struct ds_context *context);
+
+#else /* CONFIG_X86_DS */
+
+#define ds_init_intel(config) do {} while (0)
+
+#endif /* CONFIG_X86_DS */
+#endif /* _ASM_X86_DS_H */
diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
new file mode 100644
index 0000000..804b6e6
--- /dev/null
+++ b/arch/x86/include/asm/dwarf2.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_X86_DWARF2_H
+#define _ASM_X86_DWARF2_H
+
+#ifndef __ASSEMBLY__
+#warning "asm/dwarf2.h should be only included in pure assembly files"
+#endif
+
+/*
+   Macros for dwarf2 CFI unwind table entries.
+   See "as.info" for details on these pseudo ops. Unfortunately
+   they are only supported in very new binutils, so define them
+   away for older version.
+ */
+
+#ifdef CONFIG_AS_CFI
+
+#define CFI_STARTPROC .cfi_startproc
+#define CFI_ENDPROC .cfi_endproc
+#define CFI_DEF_CFA .cfi_def_cfa
+#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
+#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
+#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
+#define CFI_OFFSET .cfi_offset
+#define CFI_REL_OFFSET .cfi_rel_offset
+#define CFI_REGISTER .cfi_register
+#define CFI_RESTORE .cfi_restore
+#define CFI_REMEMBER_STATE .cfi_remember_state
+#define CFI_RESTORE_STATE .cfi_restore_state
+#define CFI_UNDEFINED .cfi_undefined
+
+#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
+#define CFI_SIGNAL_FRAME .cfi_signal_frame
+#else
+#define CFI_SIGNAL_FRAME
+#endif
+
+#else
+
+/* Due to the structure of pre-exisiting code, don't use assembler line
+   comment character # to ignore the arguments. Instead, use a dummy macro. */
+.macro cfi_ignore a=0, b=0, c=0, d=0
+.endm
+
+#define CFI_STARTPROC	cfi_ignore
+#define CFI_ENDPROC	cfi_ignore
+#define CFI_DEF_CFA	cfi_ignore
+#define CFI_DEF_CFA_REGISTER	cfi_ignore
+#define CFI_DEF_CFA_OFFSET	cfi_ignore
+#define CFI_ADJUST_CFA_OFFSET	cfi_ignore
+#define CFI_OFFSET	cfi_ignore
+#define CFI_REL_OFFSET	cfi_ignore
+#define CFI_REGISTER	cfi_ignore
+#define CFI_RESTORE	cfi_ignore
+#define CFI_REMEMBER_STATE cfi_ignore
+#define CFI_RESTORE_STATE cfi_ignore
+#define CFI_UNDEFINED cfi_ignore
+#define CFI_SIGNAL_FRAME cfi_ignore
+
+#endif
+
+#endif /* _ASM_X86_DWARF2_H */
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
new file mode 100644
index 0000000..3d8cedd
--- /dev/null
+++ b/arch/x86/include/asm/e820.h
@@ -0,0 +1,146 @@
+#ifndef _ASM_X86_E820_H
+#define _ASM_X86_E820_H
+#define E820MAP	0x2d0		/* our map */
+#define E820MAX	128		/* number of entries in E820MAP */
+
+/*
+ * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
+ * constrained space in the zeropage.  If we have more nodes than
+ * that, and if we've booted off EFI firmware, then the EFI tables
+ * passed us from the EFI firmware can list more nodes.  Size our
+ * internal memory map tables to have room for these additional
+ * nodes, based on up to three entries per node for which the
+ * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
+ * plus E820MAX, allowing space for the possible duplicate E820
+ * entries that might need room in the same arrays, prior to the
+ * call to sanitize_e820_map() to remove duplicates.  The allowance
+ * of three memory map entries per node is "enough" entries for
+ * the initial hardware platform motivating this mechanism to make
+ * use of additional EFI map entries.  Future platforms may want
+ * to allow more than three entries per node or otherwise refine
+ * this size.
+ */
+
+/*
+ * Odd: 'make headers_check' complains about numa.h if I try
+ * to collapse the next two #ifdef lines to a single line:
+ *	#if defined(__KERNEL__) && defined(CONFIG_EFI)
+ */
+#ifdef __KERNEL__
+#ifdef CONFIG_EFI
+#include <linux/numa.h>
+#define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES)
+#else	/* ! CONFIG_EFI */
+#define E820_X_MAX E820MAX
+#endif
+#else	/* ! __KERNEL__ */
+#define E820_X_MAX E820MAX
+#endif
+
+#define E820NR	0x1e8		/* # entries in E820MAP */
+
+#define E820_RAM	1
+#define E820_RESERVED	2
+#define E820_ACPI	3
+#define E820_NVS	4
+#define E820_UNUSABLE	5
+
+/* reserved RAM used by kernel itself */
+#define E820_RESERVED_KERN        128
+
+#ifndef __ASSEMBLY__
+struct e820entry {
+	__u64 addr;	/* start of memory segment */
+	__u64 size;	/* size of memory segment */
+	__u32 type;	/* type of memory segment */
+} __attribute__((packed));
+
+struct e820map {
+	__u32 nr_map;
+	struct e820entry map[E820_X_MAX];
+};
+
+#ifdef __KERNEL__
+/* see comment in arch/x86/kernel/e820.c */
+extern struct e820map e820;
+extern struct e820map e820_saved;
+
+extern unsigned long pci_mem_start;
+extern int e820_any_mapped(u64 start, u64 end, unsigned type);
+extern int e820_all_mapped(u64 start, u64 end, unsigned type);
+extern void e820_add_region(u64 start, u64 size, int type);
+extern void e820_print_map(char *who);
+extern int
+sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map);
+extern u64 e820_update_range(u64 start, u64 size, unsigned old_type,
+			       unsigned new_type);
+extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type,
+			     int checktype);
+extern void update_e820(void);
+extern void e820_setup_gap(void);
+extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
+			unsigned long start_addr, unsigned long long end_addr);
+struct setup_data;
+extern void parse_e820_ext(struct setup_data *data, unsigned long pa_data);
+
+#if defined(CONFIG_X86_64) || \
+	(defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
+extern void e820_mark_nosave_regions(unsigned long limit_pfn);
+#else
+static inline void e820_mark_nosave_regions(unsigned long limit_pfn)
+{
+}
+#endif
+
+#ifdef CONFIG_MEMTEST
+extern void early_memtest(unsigned long start, unsigned long end);
+#else
+static inline void early_memtest(unsigned long start, unsigned long end)
+{
+}
+#endif
+
+extern unsigned long end_user_pfn;
+
+extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align);
+extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align);
+extern void reserve_early(u64 start, u64 end, char *name);
+extern void reserve_early_overlap_ok(u64 start, u64 end, char *name);
+extern void free_early(u64 start, u64 end);
+extern void early_res_to_bootmem(u64 start, u64 end);
+extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
+
+extern unsigned long e820_end_of_ram_pfn(void);
+extern unsigned long e820_end_of_low_ram_pfn(void);
+extern int e820_find_active_region(const struct e820entry *ei,
+				  unsigned long start_pfn,
+				  unsigned long last_pfn,
+				  unsigned long *ei_startpfn,
+				  unsigned long *ei_endpfn);
+extern void e820_register_active_regions(int nid, unsigned long start_pfn,
+					 unsigned long end_pfn);
+extern u64 e820_hole_size(u64 start, u64 end);
+extern void finish_e820_parsing(void);
+extern void e820_reserve_resources(void);
+extern void e820_reserve_resources_late(void);
+extern void setup_memory_map(void);
+extern char *default_machine_specific_memory_setup(void);
+extern char *machine_specific_memory_setup(void);
+extern char *memory_setup(void);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#define ISA_START_ADDRESS	0xa0000
+#define ISA_END_ADDRESS		0x100000
+#define is_ISA_range(s, e) ((s) >= ISA_START_ADDRESS && (e) < ISA_END_ADDRESS)
+
+#define BIOS_BEGIN		0x000a0000
+#define BIOS_END		0x00100000
+
+#ifdef __KERNEL__
+#include <linux/ioport.h>
+
+#define HIGH_MEMORY	(1024*1024)
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_E820_H */
diff --git a/arch/x86/include/asm/edac.h b/arch/x86/include/asm/edac.h
new file mode 100644
index 0000000..e9b57ec
--- /dev/null
+++ b/arch/x86/include/asm/edac.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_EDAC_H
+#define _ASM_X86_EDAC_H
+
+/* ECC atomic, DMA, SMP and interrupt safe scrub function */
+
+static inline void atomic_scrub(void *va, u32 size)
+{
+	u32 i, *virt_addr = va;
+
+	/*
+	 * Very carefully read and write to memory atomically so we
+	 * are interrupt, DMA and SMP safe.
+	 */
+	for (i = 0; i < size / 4; i++, virt_addr++)
+		asm volatile("lock; addl $0, %0"::"m" (*virt_addr));
+}
+
+#endif /* _ASM_X86_EDAC_H */
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
new file mode 100644
index 0000000..a2e545c
--- /dev/null
+++ b/arch/x86/include/asm/efi.h
@@ -0,0 +1,110 @@
+#ifndef _ASM_X86_EFI_H
+#define _ASM_X86_EFI_H
+
+#ifdef CONFIG_X86_32
+
+extern unsigned long asmlinkage efi_call_phys(void *, ...);
+
+#define efi_call_phys0(f)		efi_call_phys(f)
+#define efi_call_phys1(f, a1)		efi_call_phys(f, a1)
+#define efi_call_phys2(f, a1, a2)	efi_call_phys(f, a1, a2)
+#define efi_call_phys3(f, a1, a2, a3)	efi_call_phys(f, a1, a2, a3)
+#define efi_call_phys4(f, a1, a2, a3, a4)	\
+	efi_call_phys(f, a1, a2, a3, a4)
+#define efi_call_phys5(f, a1, a2, a3, a4, a5)	\
+	efi_call_phys(f, a1, a2, a3, a4, a5)
+#define efi_call_phys6(f, a1, a2, a3, a4, a5, a6)	\
+	efi_call_phys(f, a1, a2, a3, a4, a5, a6)
+/*
+ * Wrap all the virtual calls in a way that forces the parameters on the stack.
+ */
+
+#define efi_call_virt(f, args...) \
+	((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args)
+
+#define efi_call_virt0(f)		efi_call_virt(f)
+#define efi_call_virt1(f, a1)		efi_call_virt(f, a1)
+#define efi_call_virt2(f, a1, a2)	efi_call_virt(f, a1, a2)
+#define efi_call_virt3(f, a1, a2, a3)	efi_call_virt(f, a1, a2, a3)
+#define efi_call_virt4(f, a1, a2, a3, a4)	\
+	efi_call_virt(f, a1, a2, a3, a4)
+#define efi_call_virt5(f, a1, a2, a3, a4, a5)	\
+	efi_call_virt(f, a1, a2, a3, a4, a5)
+#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6)	\
+	efi_call_virt(f, a1, a2, a3, a4, a5, a6)
+
+#define efi_ioremap(addr, size)			ioremap_cache(addr, size)
+
+#else /* !CONFIG_X86_32 */
+
+#define MAX_EFI_IO_PAGES	100
+
+extern u64 efi_call0(void *fp);
+extern u64 efi_call1(void *fp, u64 arg1);
+extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
+extern u64 efi_call3(void *fp, u64 arg1, u64 arg2, u64 arg3);
+extern u64 efi_call4(void *fp, u64 arg1, u64 arg2, u64 arg3, u64 arg4);
+extern u64 efi_call5(void *fp, u64 arg1, u64 arg2, u64 arg3,
+		     u64 arg4, u64 arg5);
+extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3,
+		     u64 arg4, u64 arg5, u64 arg6);
+
+#define efi_call_phys0(f)			\
+	efi_call0((void *)(f))
+#define efi_call_phys1(f, a1)			\
+	efi_call1((void *)(f), (u64)(a1))
+#define efi_call_phys2(f, a1, a2)			\
+	efi_call2((void *)(f), (u64)(a1), (u64)(a2))
+#define efi_call_phys3(f, a1, a2, a3)				\
+	efi_call3((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3))
+#define efi_call_phys4(f, a1, a2, a3, a4)				\
+	efi_call4((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3),		\
+		  (u64)(a4))
+#define efi_call_phys5(f, a1, a2, a3, a4, a5)				\
+	efi_call5((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3),		\
+		  (u64)(a4), (u64)(a5))
+#define efi_call_phys6(f, a1, a2, a3, a4, a5, a6)			\
+	efi_call6((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3),		\
+		  (u64)(a4), (u64)(a5), (u64)(a6))
+
+#define efi_call_virt0(f)				\
+	efi_call0((void *)(efi.systab->runtime->f))
+#define efi_call_virt1(f, a1)					\
+	efi_call1((void *)(efi.systab->runtime->f), (u64)(a1))
+#define efi_call_virt2(f, a1, a2)					\
+	efi_call2((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2))
+#define efi_call_virt3(f, a1, a2, a3)					\
+	efi_call3((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
+		  (u64)(a3))
+#define efi_call_virt4(f, a1, a2, a3, a4)				\
+	efi_call4((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
+		  (u64)(a3), (u64)(a4))
+#define efi_call_virt5(f, a1, a2, a3, a4, a5)				\
+	efi_call5((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
+		  (u64)(a3), (u64)(a4), (u64)(a5))
+#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6)			\
+	efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
+		  (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
+
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size);
+
+#endif /* CONFIG_X86_32 */
+
+extern void efi_reserve_early(void);
+extern void efi_call_phys_prelog(void);
+extern void efi_call_phys_epilog(void);
+
+#ifndef CONFIG_EFI
+/*
+ * IF EFI is not configured, have the EFI calls return -ENOSYS.
+ */
+#define efi_call0(_f)					(-ENOSYS)
+#define efi_call1(_f, _a1)				(-ENOSYS)
+#define efi_call2(_f, _a1, _a2)				(-ENOSYS)
+#define efi_call3(_f, _a1, _a2, _a3)			(-ENOSYS)
+#define efi_call4(_f, _a1, _a2, _a3, _a4)		(-ENOSYS)
+#define efi_call5(_f, _a1, _a2, _a3, _a4, _a5)		(-ENOSYS)
+#define efi_call6(_f, _a1, _a2, _a3, _a4, _a5, _a6)	(-ENOSYS)
+#endif /* CONFIG_EFI */
+
+#endif /* _ASM_X86_EFI_H */
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
new file mode 100644
index 0000000..40ca1be
--- /dev/null
+++ b/arch/x86/include/asm/elf.h
@@ -0,0 +1,336 @@
+#ifndef _ASM_X86_ELF_H
+#define _ASM_X86_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/auxvec.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_i387_struct elf_fpregset_t;
+
+#ifdef __i386__
+
+typedef struct user_fxsr_struct elf_fpxregset_t;
+
+#define R_386_NONE	0
+#define R_386_32	1
+#define R_386_PC32	2
+#define R_386_GOT32	3
+#define R_386_PLT32	4
+#define R_386_COPY	5
+#define R_386_GLOB_DAT	6
+#define R_386_JMP_SLOT	7
+#define R_386_RELATIVE	8
+#define R_386_GOTOFF	9
+#define R_386_GOTPC	10
+#define R_386_NUM	11
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_386
+
+#else
+
+/* x86-64 relocation types */
+#define R_X86_64_NONE		0	/* No reloc */
+#define R_X86_64_64		1	/* Direct 64 bit  */
+#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
+#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
+#define R_X86_64_PLT32		4	/* 32 bit PLT address */
+#define R_X86_64_COPY		5	/* Copy symbol at runtime */
+#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
+#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
+#define R_X86_64_RELATIVE	8	/* Adjust by program base */
+#define R_X86_64_GOTPCREL	9	/* 32 bit signed pc relative
+					   offset to GOT */
+#define R_X86_64_32		10	/* Direct 32 bit zero extended */
+#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
+#define R_X86_64_16		12	/* Direct 16 bit zero extended */
+#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
+#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
+#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
+
+#define R_X86_64_NUM		16
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_X86_64
+
+#endif
+
+#include <asm/vdso.h>
+
+extern unsigned int vdso_enabled;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch_ia32(x) \
+	(((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
+
+#include <asm/processor.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_X86_32
+#include <asm/desc.h>
+
+#define elf_check_arch(x)	elf_check_arch_ia32(x)
+
+/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
+   contains a pointer to a function which might be registered using `atexit'.
+   This provides a mean for the dynamic linker to call DT_FINI functions for
+   shared libraries that have been loaded before the code runs.
+
+   A value of 0 tells we have no such handler.
+
+   We might as well make sure everything else is cleared too (except for %esp),
+   just to make things more deterministic.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)		\
+	do {					\
+	_r->bx = 0; _r->cx = 0; _r->dx = 0;	\
+	_r->si = 0; _r->di = 0; _r->bp = 0;	\
+	_r->ax = 0;				\
+} while (0)
+
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct_user_regs, they are different)
+ */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+do {						\
+	pr_reg[0] = regs->bx;			\
+	pr_reg[1] = regs->cx;			\
+	pr_reg[2] = regs->dx;			\
+	pr_reg[3] = regs->si;			\
+	pr_reg[4] = regs->di;			\
+	pr_reg[5] = regs->bp;			\
+	pr_reg[6] = regs->ax;			\
+	pr_reg[7] = regs->ds & 0xffff;		\
+	pr_reg[8] = regs->es & 0xffff;		\
+	pr_reg[9] = regs->fs & 0xffff;		\
+	savesegment(gs, pr_reg[10]);		\
+	pr_reg[11] = regs->orig_ax;		\
+	pr_reg[12] = regs->ip;			\
+	pr_reg[13] = regs->cs & 0xffff;		\
+	pr_reg[14] = regs->flags;		\
+	pr_reg[15] = regs->sp;			\
+	pr_reg[16] = regs->ss & 0xffff;		\
+} while (0);
+
+#define ELF_PLATFORM	(utsname()->machine)
+#define set_personality_64bit()	do { } while (0)
+
+#else /* CONFIG_X86_32 */
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)			\
+	((x)->e_machine == EM_X86_64)
+
+#define compat_elf_check_arch(x)	elf_check_arch_ia32(x)
+
+static inline void start_ia32_thread(struct pt_regs *regs, u32 ip, u32 sp)
+{
+	loadsegment(fs, 0);
+	loadsegment(ds, __USER32_DS);
+	loadsegment(es, __USER32_DS);
+	load_gs_index(0);
+	regs->ip = ip;
+	regs->sp = sp;
+	regs->flags = X86_EFLAGS_IF;
+	regs->cs = __USER32_CS;
+	regs->ss = __USER32_DS;
+}
+
+static inline void elf_common_init(struct thread_struct *t,
+				   struct pt_regs *regs, const u16 ds)
+{
+	regs->ax = regs->bx = regs->cx = regs->dx = 0;
+	regs->si = regs->di = regs->bp = 0;
+	regs->r8 = regs->r9 = regs->r10 = regs->r11 = 0;
+	regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0;
+	t->fs = t->gs = 0;
+	t->fsindex = t->gsindex = 0;
+	t->ds = t->es = ds;
+}
+
+#define ELF_PLAT_INIT(_r, load_addr)			\
+do {							\
+	elf_common_init(&current->thread, _r, 0);	\
+	clear_thread_flag(TIF_IA32);			\
+} while (0)
+
+#define	COMPAT_ELF_PLAT_INIT(regs, load_addr)		\
+	elf_common_init(&current->thread, regs, __USER_DS)
+
+#define	compat_start_thread(regs, ip, sp)		\
+do {							\
+	start_ia32_thread(regs, ip, sp);		\
+	set_fs(USER_DS);				\
+} while (0)
+
+#define COMPAT_SET_PERSONALITY(ex)			\
+do {							\
+	if (test_thread_flag(TIF_IA32))			\
+		clear_thread_flag(TIF_ABI_PENDING);	\
+	else						\
+		set_thread_flag(TIF_ABI_PENDING);	\
+	current->personality |= force_personality32;	\
+} while (0)
+
+#define COMPAT_ELF_PLATFORM			("i686")
+
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct_user_regs, they are different). Assumes current is the process
+ * getting dumped.
+ */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)			\
+do {								\
+	unsigned v;						\
+	(pr_reg)[0] = (regs)->r15;				\
+	(pr_reg)[1] = (regs)->r14;				\
+	(pr_reg)[2] = (regs)->r13;				\
+	(pr_reg)[3] = (regs)->r12;				\
+	(pr_reg)[4] = (regs)->bp;				\
+	(pr_reg)[5] = (regs)->bx;				\
+	(pr_reg)[6] = (regs)->r11;				\
+	(pr_reg)[7] = (regs)->r10;				\
+	(pr_reg)[8] = (regs)->r9;				\
+	(pr_reg)[9] = (regs)->r8;				\
+	(pr_reg)[10] = (regs)->ax;				\
+	(pr_reg)[11] = (regs)->cx;				\
+	(pr_reg)[12] = (regs)->dx;				\
+	(pr_reg)[13] = (regs)->si;				\
+	(pr_reg)[14] = (regs)->di;				\
+	(pr_reg)[15] = (regs)->orig_ax;				\
+	(pr_reg)[16] = (regs)->ip;				\
+	(pr_reg)[17] = (regs)->cs;				\
+	(pr_reg)[18] = (regs)->flags;				\
+	(pr_reg)[19] = (regs)->sp;				\
+	(pr_reg)[20] = (regs)->ss;				\
+	(pr_reg)[21] = current->thread.fs;			\
+	(pr_reg)[22] = current->thread.gs;			\
+	asm("movl %%ds,%0" : "=r" (v)); (pr_reg)[23] = v;	\
+	asm("movl %%es,%0" : "=r" (v)); (pr_reg)[24] = v;	\
+	asm("movl %%fs,%0" : "=r" (v)); (pr_reg)[25] = v;	\
+	asm("movl %%gs,%0" : "=r" (v)); (pr_reg)[26] = v;	\
+} while (0);
+
+/* I'm not sure if we can use '-' here */
+#define ELF_PLATFORM       ("x86_64")
+extern void set_personality_64bit(void);
+extern unsigned int sysctl_vsyscall32;
+extern int force_personality32;
+
+#endif /* !CONFIG_X86_32 */
+
+#define CORE_DUMP_USE_REGSET
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE		(TASK_SIZE / 3 * 2)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP		(boot_cpu_data.x86_capability[0])
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define SET_PERSONALITY(ex) set_personality_64bit()
+
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ */
+#define elf_read_implies_exec(ex, executable_stack)	\
+	(executable_stack != EXSTACK_DISABLE_X)
+
+struct task_struct;
+
+#define	ARCH_DLINFO_IA32(vdso_enabled)					\
+do {									\
+	if (vdso_enabled) {						\
+		NEW_AUX_ENT(AT_SYSINFO,	VDSO_ENTRY);			\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE);	\
+	}								\
+} while (0)
+
+#ifdef CONFIG_X86_32
+
+#define VDSO_HIGH_BASE		(__fix_to_virt(FIX_VDSO))
+
+#define ARCH_DLINFO		ARCH_DLINFO_IA32(vdso_enabled)
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+
+#else /* CONFIG_X86_32 */
+
+#define VDSO_HIGH_BASE		0xffffe000U /* CONFIG_COMPAT_VDSO address */
+
+/* 1GB for 64bit, 8MB for 32bit */
+#define STACK_RND_MASK (test_thread_flag(TIF_IA32) ? 0x7ff : 0x3fffff)
+
+#define ARCH_DLINFO							\
+do {									\
+	if (vdso_enabled)						\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR,				\
+			    (unsigned long)current->mm->context.vdso);	\
+} while (0)
+
+#define AT_SYSINFO		32
+
+#define COMPAT_ARCH_DLINFO	ARCH_DLINFO_IA32(sysctl_vsyscall32)
+
+#define COMPAT_ELF_ET_DYN_BASE	(TASK_UNMAPPED_BASE + 0x1000000)
+
+#endif /* !CONFIG_X86_32 */
+
+#define VDSO_CURRENT_BASE	((unsigned long)current->mm->context.vdso)
+
+#define VDSO_ENTRY							\
+	((unsigned long)VDSO32_SYMBOL(VDSO_CURRENT_BASE, vsyscall))
+
+struct linux_binprm;
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int executable_stack);
+
+extern int syscall32_setup_pages(struct linux_binprm *, int exstack);
+#define compat_arch_setup_additional_pages	syscall32_setup_pages
+
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
+#endif /* _ASM_X86_ELF_H */
diff --git a/arch/x86/include/asm/emergency-restart.h b/arch/x86/include/asm/emergency-restart.h
new file mode 100644
index 0000000..94826cf
--- /dev/null
+++ b/arch/x86/include/asm/emergency-restart.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_EMERGENCY_RESTART_H
+#define _ASM_X86_EMERGENCY_RESTART_H
+
+enum reboot_type {
+	BOOT_TRIPLE = 't',
+	BOOT_KBD = 'k',
+#ifdef CONFIG_X86_32
+	BOOT_BIOS = 'b',
+#endif
+	BOOT_ACPI = 'a',
+	BOOT_EFI = 'e'
+};
+
+extern enum reboot_type reboot_type;
+
+extern void machine_emergency_restart(void);
+
+#endif /* _ASM_X86_EMERGENCY_RESTART_H */
diff --git a/arch/x86/include/asm/errno.h b/arch/x86/include/asm/errno.h
new file mode 100644
index 0000000..4c82b50
--- /dev/null
+++ b/arch/x86/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
new file mode 100644
index 0000000..380f0b4
--- /dev/null
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -0,0 +1,193 @@
+#ifndef __ASM_ES7000_APIC_H
+#define __ASM_ES7000_APIC_H
+
+#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+	        return (1);
+}
+
+static inline cpumask_t target_cpus(void)
+{
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+	return CPU_MASK_ALL;
+#else
+	return cpumask_of_cpu(smp_processor_id());
+#endif
+}
+
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+#define APIC_DFR_VALUE		(APIC_DFR_CLUSTER)
+#define INT_DELIVERY_MODE	(dest_LowestPrio)
+#define INT_DEST_MODE		(1)    /* logical delivery broadcast to all procs */
+#define NO_BALANCE_IRQ		(1)
+#undef  WAKE_SECONDARY_VIA_INIT
+#define WAKE_SECONDARY_VIA_MIP
+#else
+#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
+#define INT_DELIVERY_MODE	(dest_Fixed)
+#define INT_DEST_MODE		(0)    /* phys delivery to target procs */
+#define NO_BALANCE_IRQ		(0)
+#undef  APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL	0x0
+#define WAKE_SECONDARY_VIA_INIT
+#endif
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+	unsigned long id;
+	id = xapic_phys_to_log_apicid(cpu);
+	return (SET_APIC_LOGICAL_ID(id));
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LdR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+#ifndef CONFIG_X86_GENERICARCH
+extern void enable_apic_mode(void);
+#endif
+
+extern int apic_version [MAX_APICS];
+static inline void setup_apic_routing(void)
+{
+	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs, target cpus %lx\n",
+		(apic_version[apic] == 0x14) ?
+		"Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(target_cpus())[0]);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+	return 0;
+}
+
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (!mps_cpu)
+		return boot_cpu_physical_apicid;
+	else if (mps_cpu < NR_CPUS)
+		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+	static int id = 0;
+	physid_mask_t mask;
+	mask = physid_mask_of_physid(id);
+	++id;
+	return mask;
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+       if (cpu >= NR_CPUS)
+	       return BAD_APICID;
+       return (int)cpu_2_logical_apicid[cpu];
+#else
+	return logical_smp_processor_id();
+#endif
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xff);
+}
+
+
+static inline void setup_portio_remap(void)
+{
+}
+
+extern unsigned int boot_cpu_physical_apicid;
+static inline int check_phys_apicid_present(int cpu_physical_apicid)
+{
+	boot_cpu_physical_apicid = read_apic_id();
+	return (1);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int num_bits_set;
+	int cpus_found = 0;
+	int cpu;
+	int apicid;
+
+	num_bits_set = cpus_weight(cpumask);
+	/* Return id to all */
+	if (num_bits_set == NR_CPUS)
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+		return 0xFF;
+#else
+		return cpu_to_logical_apicid(0);
+#endif
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of TARGET_CPUS.
+	 */
+	cpu = first_cpu(cpumask);
+	apicid = cpu_to_logical_apicid(cpu);
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, cpumask)) {
+			int new_apicid = cpu_to_logical_apicid(cpu);
+			if (apicid_cluster(apicid) !=
+					apicid_cluster(new_apicid)){
+				printk ("%s: Not a valid mask!\n", __func__);
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+				return 0xFF;
+#else
+				return cpu_to_logical_apicid(0);
+#endif
+			}
+			apicid = new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_ES7000_APIC_H */
diff --git a/arch/x86/include/asm/es7000/apicdef.h b/arch/x86/include/asm/es7000/apicdef.h
new file mode 100644
index 0000000..8b234a3
--- /dev/null
+++ b/arch/x86/include/asm/es7000/apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_ES7000_APICDEF_H
+#define __ASM_ES7000_APICDEF_H
+
+#define		APIC_ID_MASK		(0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+	return (((x)>>24)&0xFF);
+}
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/arch/x86/include/asm/es7000/ipi.h b/arch/x86/include/asm/es7000/ipi.h
new file mode 100644
index 0000000..632a955
--- /dev/null
+++ b/arch/x86/include/asm/es7000/ipi.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_ES7000_IPI_H
+#define __ASM_ES7000_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_ES7000_IPI_H */
diff --git a/arch/x86/include/asm/es7000/mpparse.h b/arch/x86/include/asm/es7000/mpparse.h
new file mode 100644
index 0000000..ed5a3ca
--- /dev/null
+++ b/arch/x86/include/asm/es7000/mpparse.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_ES7000_MPPARSE_H
+#define __ASM_ES7000_MPPARSE_H
+
+#include <linux/acpi.h>
+
+extern int parse_unisys_oem (char *oemptr);
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
+extern void setup_unisys(void);
+
+#ifndef CONFIG_X86_GENERICARCH
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
+#endif
+
+#ifdef CONFIG_ACPI
+
+static inline int es7000_check_dsdt(void)
+{
+	struct acpi_table_header header;
+
+	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
+	    !strncmp(header.oem_id, "UNISYS", 6))
+		return 1;
+	return 0;
+}
+#endif
+
+#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/arch/x86/include/asm/es7000/wakecpu.h b/arch/x86/include/asm/es7000/wakecpu.h
new file mode 100644
index 0000000..3ffc5a7
--- /dev/null
+++ b/arch/x86/include/asm/es7000/wakecpu.h
@@ -0,0 +1,59 @@
+#ifndef __ASM_ES7000_WAKECPU_H
+#define __ASM_ES7000_WAKECPU_H
+
+/*
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#ifdef CONFIG_ES7000_CLUSTERED_APIC
+#define WAKE_SECONDARY_VIA_MIP
+#else
+#define WAKE_SECONDARY_VIA_INIT
+#endif
+
+#ifdef WAKE_SECONDARY_VIA_MIP
+extern int es7000_start_cpu(int cpu, unsigned long eip);
+static inline int
+wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
+{
+	int boot_error = 0;
+	boot_error = es7000_start_cpu(phys_apicid, start_eip);
+	return boot_error;
+}
+#endif
+
+#define TRAMPOLINE_LOW phys_to_virt(0x467)
+#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+#ifdef WAKE_SECONDARY_VIA_INIT
+	while (!atomic_read(deassert))
+		cpu_relax();
+#endif
+	return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/arch/x86/include/asm/fb.h b/arch/x86/include/asm/fb.h
new file mode 100644
index 0000000..5301846
--- /dev/null
+++ b/arch/x86/include/asm/fb.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_FB_H
+#define _ASM_X86_FB_H
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	if (boot_cpu_data.x86 > 3)
+		pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
+}
+
+#ifdef CONFIG_X86_32
+extern int fb_is_primary_device(struct fb_info *info);
+#else
+static inline int fb_is_primary_device(struct fb_info *info) { return 0; }
+#endif
+
+#endif /* _ASM_X86_FB_H */
diff --git a/arch/x86/include/asm/fcntl.h b/arch/x86/include/asm/fcntl.h
new file mode 100644
index 0000000..46ab12d
--- /dev/null
+++ b/arch/x86/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
new file mode 100644
index 0000000..8668a94
--- /dev/null
+++ b/arch/x86/include/asm/fixmap.h
@@ -0,0 +1,68 @@
+#ifndef _ASM_X86_FIXMAP_H
+#define _ASM_X86_FIXMAP_H
+
+#ifdef CONFIG_X86_32
+# include "fixmap_32.h"
+#else
+# include "fixmap_64.h"
+#endif
+
+extern int fixmaps_set;
+
+void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
+void native_set_fixmap(enum fixed_addresses idx,
+		       unsigned long phys, pgprot_t flags);
+
+#ifndef CONFIG_PARAVIRT
+static inline void __set_fixmap(enum fixed_addresses idx,
+				unsigned long phys, pgprot_t flags)
+{
+	native_set_fixmap(idx, phys, flags);
+}
+#endif
+
+#define set_fixmap(idx, phys)				\
+	__set_fixmap(idx, phys, PAGE_KERNEL)
+
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys)			\
+	__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+
+#define clear_fixmap(idx)			\
+	__set_fixmap(idx, 0, __pgprot(0))
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without translation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+	return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+#endif /* _ASM_X86_FIXMAP_H */
diff --git a/arch/x86/include/asm/fixmap_32.h b/arch/x86/include/asm/fixmap_32.h
new file mode 100644
index 0000000..09f29ab
--- /dev/null
+++ b/arch/x86/include/asm/fixmap_32.h
@@ -0,0 +1,123 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_X86_FIXMAP_32_H
+#define _ASM_X86_FIXMAP_32_H
+
+
+/* used by vmalloc.c, vsyscall.lds.S.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap.
+ */
+extern unsigned long __FIXADDR_TOP;
+#define FIXADDR_USER_START     __fix_to_virt(FIX_VDSO)
+#define FIXADDR_USER_END       __fix_to_virt(FIX_VDSO - 1)
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <asm/acpi.h>
+#include <asm/apicdef.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+	FIX_VDSO,
+	FIX_DBGP_BASE,
+	FIX_EARLYCON_MEM_BASE,
+#ifdef CONFIG_X86_LOCAL_APIC
+	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
+#endif
+#ifdef CONFIG_X86_IO_APIC
+	FIX_IO_APIC_BASE_0,
+	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS-1,
+#endif
+#ifdef CONFIG_X86_VISWS_APIC
+	FIX_CO_CPU,	/* Cobalt timer */
+	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */
+	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
+	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
+#endif
+#ifdef CONFIG_X86_F00F_BUG
+	FIX_F00F_IDT,	/* Virtual mapping for IDT */
+#endif
+#ifdef CONFIG_X86_CYCLONE_TIMER
+	FIX_CYCLONE_TIMER, /*cyclone timer register*/
+#endif
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+#ifdef CONFIG_PCI_MMCONFIG
+	FIX_PCIE_MCFG,
+#endif
+#ifdef CONFIG_PARAVIRT
+	FIX_PARAVIRT_BOOTMAP,
+#endif
+	__end_of_permanent_fixed_addresses,
+	/*
+	 * 256 temporary boot-time mappings, used by early_ioremap(),
+	 * before ioremap() is functional.
+	 *
+	 * We round it up to the next 256 pages boundary so that we
+	 * can have a single pgd entry and a single pte table:
+	 */
+#define NR_FIX_BTMAPS		64
+#define FIX_BTMAPS_SLOTS	4
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
+			(__end_of_permanent_fixed_addresses & 255),
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+	FIX_WP_TEST,
+#ifdef CONFIG_ACPI
+	FIX_ACPI_BEGIN,
+	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
+#endif
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void reserve_top_address(unsigned long reserve);
+
+
+#define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
+
+#define __FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define __FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - __FIXADDR_SIZE)
+#define FIXADDR_BOOT_START	(FIXADDR_TOP - __FIXADDR_BOOT_SIZE)
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_FIXMAP_32_H */
diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
new file mode 100644
index 0000000..00a30ab9
--- /dev/null
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -0,0 +1,83 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ */
+
+#ifndef _ASM_X86_FIXMAP_64_H
+#define _ASM_X86_FIXMAP_64_H
+
+#include <linux/kernel.h>
+#include <asm/acpi.h>
+#include <asm/apicdef.h>
+#include <asm/page.h>
+#include <asm/vsyscall.h>
+#include <asm/efi.h>
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process.
+ *
+ * These 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages (or larger if used with an increment
+ * higher than 1). Use set_fixmap(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+enum fixed_addresses {
+	VSYSCALL_LAST_PAGE,
+	VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE
+			    + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
+	VSYSCALL_HPET,
+	FIX_DBGP_BASE,
+	FIX_EARLYCON_MEM_BASE,
+	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
+	FIX_IO_APIC_BASE_0,
+	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
+	FIX_EFI_IO_MAP_LAST_PAGE,
+	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
+				  + MAX_EFI_IO_PAGES - 1,
+#ifdef CONFIG_PARAVIRT
+	FIX_PARAVIRT_BOOTMAP,
+#endif
+	__end_of_permanent_fixed_addresses,
+#ifdef CONFIG_ACPI
+	FIX_ACPI_BEGIN,
+	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
+#endif
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
+	/*
+	 * 256 temporary boot-time mappings, used by early_ioremap(),
+	 * before ioremap() is functional.
+	 *
+	 * We round it up to the next 256 pages boundary so that we
+	 * can have a single pgd entry and a single pte table:
+	 */
+#define NR_FIX_BTMAPS		64
+#define FIX_BTMAPS_SLOTS	4
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
+			(__end_of_permanent_fixed_addresses & 255),
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+	__end_of_fixed_addresses
+};
+
+#define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+/* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
+#define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
+#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
+
+#endif /* _ASM_X86_FIXMAP_64_H */
diff --git a/arch/x86/include/asm/floppy.h b/arch/x86/include/asm/floppy.h
new file mode 100644
index 0000000..dbe82a5
--- /dev/null
+++ b/arch/x86/include/asm/floppy.h
@@ -0,0 +1,281 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef _ASM_X86_FLOPPY_H
+#define _ASM_X86_FLOPPY_H
+
+#include <linux/vmalloc.h>
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ */
+#define _CROSS_64KB(a, s, vdma)						\
+	(!(vdma) &&							\
+	 ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+
+#define CROSS_64KB(a, s) _CROSS_64KB(a, s, use_virtual_dma & 1)
+
+
+#define SW fd_routine[use_virtual_dma & 1]
+#define CSW fd_routine[can_use_virtual_dma & 1]
+
+
+#define fd_inb(port)		inb_p(port)
+#define fd_outb(value, port)	outb_p(value, port)
+
+#define fd_request_dma()	CSW._request_dma(FLOPPY_DMA, "floppy")
+#define fd_free_dma()		CSW._free_dma(FLOPPY_DMA)
+#define fd_enable_irq()		enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()	disable_irq(FLOPPY_IRQ)
+#define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL)
+#define fd_get_dma_residue()	SW._get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size)	SW._dma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
+
+#define FLOPPY_CAN_FALLBACK_ON_NODMA
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_pdma;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id)
+{
+	unsigned char st;
+
+#undef TRACE_FLPY_INT
+
+#ifdef TRACE_FLPY_INT
+	static int calls;
+	static int bytes;
+	static int dma_wait;
+#endif
+	if (!doing_pdma)
+		return floppy_interrupt(irq, dev_id);
+
+#ifdef TRACE_FLPY_INT
+	if (!calls)
+		bytes = virtual_dma_count;
+#endif
+
+	{
+		int lcount;
+		char *lptr;
+
+		st = 1;
+		for (lcount = virtual_dma_count, lptr = virtual_dma_addr;
+		     lcount; lcount--, lptr++) {
+			st = inb(virtual_dma_port + 4) & 0xa0;
+			if (st != 0xa0)
+				break;
+			if (virtual_dma_mode)
+				outb_p(*lptr, virtual_dma_port + 5);
+			else
+				*lptr = inb_p(virtual_dma_port + 5);
+		}
+		virtual_dma_count = lcount;
+		virtual_dma_addr = lptr;
+		st = inb(virtual_dma_port + 4);
+	}
+
+#ifdef TRACE_FLPY_INT
+	calls++;
+#endif
+	if (st == 0x20)
+		return IRQ_HANDLED;
+	if (!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count = 0;
+#ifdef TRACE_FLPY_INT
+		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
+		       virtual_dma_count, virtual_dma_residue, calls, bytes,
+		       dma_wait);
+		calls = 0;
+		dma_wait = 0;
+#endif
+		doing_pdma = 0;
+		floppy_interrupt(irq, dev_id);
+		return IRQ_HANDLED;
+	}
+#ifdef TRACE_FLPY_INT
+	if (!virtual_dma_count)
+		dma_wait++;
+#endif
+	return IRQ_HANDLED;
+}
+
+static void fd_disable_dma(void)
+{
+	if (!(can_use_virtual_dma & 1))
+		disable_dma(FLOPPY_DMA);
+	doing_pdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count = 0;
+}
+
+static int vdma_request_dma(unsigned int dmanr, const char *device_id)
+{
+	return 0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if (can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,
+				   IRQF_DISABLED, "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+				   IRQF_DISABLED, "floppy", NULL);
+}
+
+static unsigned long dma_mem_alloc(unsigned long size)
+{
+	return __get_dma_pages(GFP_KERNEL|__GFP_NORETRY, get_order(size));
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+	return (unsigned long)vmalloc(size);
+
+}
+
+#define nodma_mem_alloc(size) vdma_mem_alloc(size)
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	if ((unsigned long)addr >= (unsigned long)high_memory)
+		vfree((void *)addr);
+	else
+		free_pages(addr, get_order(size));
+}
+
+#define fd_dma_mem_free(addr, size)  _fd_dma_mem_free(addr, size)
+
+static void _fd_chose_dma_mode(char *addr, unsigned long size)
+{
+	if (can_use_virtual_dma == 2) {
+		if ((unsigned long)addr >= (unsigned long)high_memory ||
+		    isa_virt_to_bus(addr) >= 0x1000000 ||
+		    _CROSS_64KB(addr, size, 0))
+			use_virtual_dma = 1;
+		else
+			use_virtual_dma = 0;
+	} else {
+		use_virtual_dma = can_use_virtual_dma & 1;
+	}
+}
+
+#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
+
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_pdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+#ifdef FLOPPY_SANITY_CHECK
+	if (CROSS_64KB(addr, size)) {
+		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
+		return -1;
+	}
+#endif
+	/* actual, physical DMA */
+	doing_pdma = 0;
+	clear_dma_ff(FLOPPY_DMA);
+	set_dma_mode(FLOPPY_DMA, mode);
+	set_dma_addr(FLOPPY_DMA, isa_virt_to_bus(addr));
+	set_dma_count(FLOPPY_DMA, size);
+	enable_dma(FLOPPY_DMA);
+	return 0;
+}
+
+static struct fd_routine_l {
+	int (*_request_dma)(unsigned int dmanr, const char *device_id);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	unsigned long (*_dma_mem_alloc)(unsigned long size);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+} fd_routine[] = {
+	{
+		request_dma,
+		free_dma,
+		get_dma_residue,
+		dma_mem_alloc,
+		hard_dma_setup
+	},
+	{
+		vdma_request_dma,
+		vdma_nop,
+		vdma_get_dma_residue,
+		vdma_mem_alloc,
+		vdma_dma_setup
+	}
+};
+
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
+ * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
+ * coincides with another rtc CMOS user.		Paul G.
+ */
+#define FLOPPY0_TYPE					\
+({							\
+	unsigned long flags;				\
+	unsigned char val;				\
+	spin_lock_irqsave(&rtc_lock, flags);		\
+	val = (CMOS_READ(0x10) >> 4) & 15;		\
+	spin_unlock_irqrestore(&rtc_lock, flags);	\
+	val;						\
+})
+
+#define FLOPPY1_TYPE					\
+({							\
+	unsigned long flags;				\
+	unsigned char val;				\
+	spin_lock_irqsave(&rtc_lock, flags);		\
+	val = CMOS_READ(0x10) & 15;			\
+	spin_unlock_irqrestore(&rtc_lock, flags);	\
+	val;						\
+})
+
+#define N_FDC 2
+#define N_DRIVE 8
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* _ASM_X86_FLOPPY_H */
diff --git a/arch/x86/include/asm/frame.h b/arch/x86/include/asm/frame.h
new file mode 100644
index 0000000..06850a7
--- /dev/null
+++ b/arch/x86/include/asm/frame.h
@@ -0,0 +1,27 @@
+#ifdef __ASSEMBLY__
+
+#include <asm/dwarf2.h>
+
+/* The annotation hides the frame from the unwinder and makes it look
+   like a ordinary ebp save/restore. This avoids some special cases for
+   frame pointer later */
+#ifdef CONFIG_FRAME_POINTER
+	.macro FRAME
+	pushl %ebp
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebp,0
+	movl %esp,%ebp
+	.endm
+	.macro ENDFRAME
+	popl %ebp
+	CFI_ADJUST_CFA_OFFSET -4
+	CFI_RESTORE ebp
+	.endm
+#else
+	.macro FRAME
+	.endm
+	.macro ENDFRAME
+	.endm
+#endif
+
+#endif  /*  __ASSEMBLY__  */
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
new file mode 100644
index 0000000..47f7e65
--- /dev/null
+++ b/arch/x86/include/asm/ftrace.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_X86_FTRACE_H
+#define _ASM_X86_FTRACE_H
+
+#ifdef CONFIG_FTRACE
+#define MCOUNT_ADDR		((long)(mcount))
+#define MCOUNT_INSN_SIZE	5 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void mcount(void);
+
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	/*
+	 * call mcount is "e8 <4 byte offset>"
+	 * The addr points to the 4 byte offset and the caller of this
+	 * function wants the pointer to e8. Simply subtract one.
+	 */
+	return addr - 1;
+}
+#endif
+
+#endif /* CONFIG_FTRACE */
+
+#endif /* _ASM_X86_FTRACE_H */
diff --git a/arch/x86/include/asm/futex.h b/arch/x86/include/asm/futex.h
new file mode 100644
index 0000000..1f11ce4
--- /dev/null
+++ b/arch/x86/include/asm/futex.h
@@ -0,0 +1,140 @@
+#ifndef _ASM_X86_FUTEX_H
+#define _ASM_X86_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+
+#include <asm/asm.h>
+#include <asm/errno.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+
+#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg)	\
+	asm volatile("1:\t" insn "\n"				\
+		     "2:\t.section .fixup,\"ax\"\n"		\
+		     "3:\tmov\t%3, %1\n"			\
+		     "\tjmp\t2b\n"				\
+		     "\t.previous\n"				\
+		     _ASM_EXTABLE(1b, 3b)			\
+		     : "=r" (oldval), "=r" (ret), "+m" (*uaddr)	\
+		     : "i" (-EFAULT), "0" (oparg), "1" (0))
+
+#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg)	\
+	asm volatile("1:\tmovl	%2, %0\n"			\
+		     "\tmovl\t%0, %3\n"				\
+		     "\t" insn "\n"				\
+		     "2:\t" LOCK_PREFIX "cmpxchgl %3, %2\n"	\
+		     "\tjnz\t1b\n"				\
+		     "3:\t.section .fixup,\"ax\"\n"		\
+		     "4:\tmov\t%5, %1\n"			\
+		     "\tjmp\t3b\n"				\
+		     "\t.previous\n"				\
+		     _ASM_EXTABLE(1b, 4b)			\
+		     _ASM_EXTABLE(2b, 4b)			\
+		     : "=&a" (oldval), "=&r" (ret),		\
+		       "+m" (*uaddr), "=&r" (tem)		\
+		     : "r" (oparg), "i" (-EFAULT), "1" (0))
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret, tem;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP)
+	/* Real i386 machines can only support FUTEX_OP_SET */
+	if (op != FUTEX_OP_SET && boot_cpu_data.x86 == 3)
+		return -ENOSYS;
+#endif
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op1("xchgl %0, %2", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op1(LOCK_PREFIX "xaddl %0, %2", ret, oldval,
+				   uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op2("orl %4, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op2("andl %4, %3", ret, oldval, uaddr, ~oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op2("xorl %4, %3", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ:
+			ret = (oldval == cmparg);
+			break;
+		case FUTEX_OP_CMP_NE:
+			ret = (oldval != cmparg);
+			break;
+		case FUTEX_OP_CMP_LT:
+			ret = (oldval < cmparg);
+			break;
+		case FUTEX_OP_CMP_GE:
+			ret = (oldval >= cmparg);
+			break;
+		case FUTEX_OP_CMP_LE:
+			ret = (oldval <= cmparg);
+			break;
+		case FUTEX_OP_CMP_GT:
+			ret = (oldval > cmparg);
+			break;
+		default:
+			ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval,
+						int newval)
+{
+
+#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP)
+	/* Real i386 machines have no cmpxchg instruction */
+	if (boot_cpu_data.x86 == 3)
+		return -ENOSYS;
+#endif
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	asm volatile("1:\t" LOCK_PREFIX "cmpxchgl %3, %1\n"
+		     "2:\t.section .fixup, \"ax\"\n"
+		     "3:\tmov     %2, %0\n"
+		     "\tjmp     2b\n"
+		     "\t.previous\n"
+		     _ASM_EXTABLE(1b, 3b)
+		     : "=a" (oldval), "+m" (*uaddr)
+		     : "i" (-EFAULT), "r" (newval), "0" (oldval)
+		     : "memory"
+	);
+
+	return oldval;
+}
+
+#endif
+#endif /* _ASM_X86_FUTEX_H */
diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h
new file mode 100644
index 0000000..7425226
--- /dev/null
+++ b/arch/x86/include/asm/gart.h
@@ -0,0 +1,73 @@
+#ifndef _ASM_X86_GART_H
+#define _ASM_X86_GART_H
+
+#include <asm/e820.h>
+
+extern void set_up_gart_resume(u32, u32);
+
+extern int fallback_aper_order;
+extern int fallback_aper_force;
+extern int fix_aperture;
+
+/* PTE bits. */
+#define GPTE_VALID	1
+#define GPTE_COHERENT	2
+
+/* Aperture control register bits. */
+#define GARTEN		(1<<0)
+#define DISGARTCPU	(1<<4)
+#define DISGARTIO	(1<<5)
+
+/* GART cache control register bits. */
+#define INVGART		(1<<0)
+#define GARTPTEERR	(1<<1)
+
+/* K8 On-cpu GART registers */
+#define AMD64_GARTAPERTURECTL	0x90
+#define AMD64_GARTAPERTUREBASE	0x94
+#define AMD64_GARTTABLEBASE	0x98
+#define AMD64_GARTCACHECTL	0x9c
+#define AMD64_GARTEN		(1<<0)
+
+extern int agp_amd64_init(void);
+
+static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
+{
+	u32 tmp, ctl;
+
+        /* address of the mappings table */
+        addr >>= 12;
+        tmp = (u32) addr<<4;
+        tmp &= ~0xf;
+        pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp);
+
+        /* Enable GART translation for this hammer. */
+        pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
+        ctl |= GARTEN;
+        ctl &= ~(DISGARTCPU | DISGARTIO);
+        pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
+}
+
+static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
+{
+	if (!aper_base)
+		return 0;
+
+	if (aper_base + aper_size > 0x100000000ULL) {
+		printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
+		return 0;
+	}
+	if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
+		printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
+		return 0;
+	}
+	if (aper_size < min_size) {
+		printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
+				 aper_size>>20, min_size>>20);
+		return 0;
+	}
+
+	return 1;
+}
+
+#endif /* _ASM_X86_GART_H */
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
new file mode 100644
index 0000000..d48bee6
--- /dev/null
+++ b/arch/x86/include/asm/genapic.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "genapic_32.h"
+#else
+# include "genapic_64.h"
+#endif
diff --git a/arch/x86/include/asm/genapic_32.h b/arch/x86/include/asm/genapic_32.h
new file mode 100644
index 0000000..5cbd4fc
--- /dev/null
+++ b/arch/x86/include/asm/genapic_32.h
@@ -0,0 +1,126 @@
+#ifndef _ASM_X86_GENAPIC_32_H
+#define _ASM_X86_GENAPIC_32_H
+
+#include <asm/mpspec.h>
+
+/*
+ * Generic APIC driver interface.
+ *
+ * An straight forward mapping of the APIC related parts of the
+ * x86 subarchitecture interface to a dynamic object.
+ *
+ * This is used by the "generic" x86 subarchitecture.
+ *
+ * Copyright 2003 Andi Kleen, SuSE Labs.
+ */
+
+struct mpc_config_bus;
+struct mp_config_table;
+struct mpc_config_processor;
+
+struct genapic {
+	char *name;
+	int (*probe)(void);
+
+	int (*apic_id_registered)(void);
+	cpumask_t (*target_cpus)(void);
+	int int_delivery_mode;
+	int int_dest_mode;
+	int ESR_DISABLE;
+	int apic_destination_logical;
+	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
+	unsigned long (*check_apicid_present)(int apicid);
+	int no_balance_irq;
+	int no_ioapic_check;
+	void (*init_apic_ldr)(void);
+	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
+
+	void (*setup_apic_routing)(void);
+	int (*multi_timer_check)(int apic, int irq);
+	int (*apicid_to_node)(int logical_apicid);
+	int (*cpu_to_logical_apicid)(int cpu);
+	int (*cpu_present_to_apicid)(int mps_cpu);
+	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
+	void (*setup_portio_remap)(void);
+	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
+	void (*enable_apic_mode)(void);
+	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
+
+	/* mpparse */
+	/* When one of the next two hooks returns 1 the genapic
+	   is switched to this. Essentially they are additional probe
+	   functions. */
+	int (*mps_oem_check)(struct mp_config_table *mpc, char *oem,
+			     char *productid);
+	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
+
+	unsigned (*get_apic_id)(unsigned long x);
+	unsigned long apic_id_mask;
+	unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
+	cpumask_t (*vector_allocation_domain)(int cpu);
+
+#ifdef CONFIG_SMP
+	/* ipi */
+	void (*send_IPI_mask)(cpumask_t mask, int vector);
+	void (*send_IPI_allbutself)(int vector);
+	void (*send_IPI_all)(int vector);
+#endif
+};
+
+#define APICFUNC(x) .x = x,
+
+/* More functions could be probably marked IPIFUNC and save some space
+   in UP GENERICARCH kernels, but I don't have the nerve right now
+   to untangle this mess. -AK  */
+#ifdef CONFIG_SMP
+#define IPIFUNC(x) APICFUNC(x)
+#else
+#define IPIFUNC(x)
+#endif
+
+#define APIC_INIT(aname, aprobe)			\
+{							\
+	.name = aname,					\
+	.probe = aprobe,				\
+	.int_delivery_mode = INT_DELIVERY_MODE,		\
+	.int_dest_mode = INT_DEST_MODE,			\
+	.no_balance_irq = NO_BALANCE_IRQ,		\
+	.ESR_DISABLE = esr_disable,			\
+	.apic_destination_logical = APIC_DEST_LOGICAL,	\
+	APICFUNC(apic_id_registered)			\
+	APICFUNC(target_cpus)				\
+	APICFUNC(check_apicid_used)			\
+	APICFUNC(check_apicid_present)			\
+	APICFUNC(init_apic_ldr)				\
+	APICFUNC(ioapic_phys_id_map)			\
+	APICFUNC(setup_apic_routing)			\
+	APICFUNC(multi_timer_check)			\
+	APICFUNC(apicid_to_node)			\
+	APICFUNC(cpu_to_logical_apicid)			\
+	APICFUNC(cpu_present_to_apicid)			\
+	APICFUNC(apicid_to_cpu_present)			\
+	APICFUNC(setup_portio_remap)			\
+	APICFUNC(check_phys_apicid_present)		\
+	APICFUNC(mps_oem_check)				\
+	APICFUNC(get_apic_id)				\
+	.apic_id_mask = APIC_ID_MASK,			\
+	APICFUNC(cpu_mask_to_apicid)			\
+	APICFUNC(vector_allocation_domain)			\
+	APICFUNC(acpi_madt_oem_check)			\
+	IPIFUNC(send_IPI_mask)				\
+	IPIFUNC(send_IPI_allbutself)			\
+	IPIFUNC(send_IPI_all)				\
+	APICFUNC(enable_apic_mode)			\
+	APICFUNC(phys_pkg_id)				\
+}
+
+extern struct genapic *genapic;
+
+enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
+#define get_uv_system_type()		UV_NONE
+#define is_uv_system()			0
+#define uv_wakeup_secondary(a, b)	1
+#define uv_system_init()		do {} while (0)
+
+
+#endif /* _ASM_X86_GENAPIC_32_H */
diff --git a/arch/x86/include/asm/genapic_64.h b/arch/x86/include/asm/genapic_64.h
new file mode 100644
index 0000000..13c4e96
--- /dev/null
+++ b/arch/x86/include/asm/genapic_64.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_X86_GENAPIC_64_H
+#define _ASM_X86_GENAPIC_64_H
+
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC sub-arch data struct.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+
+struct genapic {
+	char *name;
+	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
+	u32 int_delivery_mode;
+	u32 int_dest_mode;
+	int (*apic_id_registered)(void);
+	cpumask_t (*target_cpus)(void);
+	cpumask_t (*vector_allocation_domain)(int cpu);
+	void (*init_apic_ldr)(void);
+	/* ipi */
+	void (*send_IPI_mask)(cpumask_t mask, int vector);
+	void (*send_IPI_allbutself)(int vector);
+	void (*send_IPI_all)(int vector);
+	void (*send_IPI_self)(int vector);
+	/* */
+	unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
+	unsigned int (*phys_pkg_id)(int index_msb);
+	unsigned int (*get_apic_id)(unsigned long x);
+	unsigned long (*set_apic_id)(unsigned int id);
+	unsigned long apic_id_mask;
+};
+
+extern struct genapic *genapic;
+
+extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
+extern struct genapic apic_x2apic_cluster;
+extern struct genapic apic_x2apic_phys;
+extern int acpi_madt_oem_check(char *, char *);
+
+extern void apic_send_IPI_self(int vector);
+enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
+extern enum uv_system_type get_uv_system_type(void);
+extern int is_uv_system(void);
+
+extern struct genapic apic_x2apic_uv_x;
+DECLARE_PER_CPU(int, x2apic_extra_bits);
+extern void uv_cpu_init(void);
+extern void uv_system_init(void);
+extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
+
+extern void setup_apic_routing(void);
+
+#endif /* _ASM_X86_GENAPIC_64_H */
diff --git a/arch/x86/include/asm/geode.h b/arch/x86/include/asm/geode.h
new file mode 100644
index 0000000..ad3c2ed
--- /dev/null
+++ b/arch/x86/include/asm/geode.h
@@ -0,0 +1,253 @@
+/*
+ * AMD Geode definitions
+ * Copyright (C) 2006, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_X86_GEODE_H
+#define _ASM_X86_GEODE_H
+
+#include <asm/processor.h>
+#include <linux/io.h>
+
+/* Generic southbridge functions */
+
+#define GEODE_DEV_PMS 0
+#define GEODE_DEV_ACPI 1
+#define GEODE_DEV_GPIO 2
+#define GEODE_DEV_MFGPT 3
+
+extern int geode_get_dev_base(unsigned int dev);
+
+/* Useful macros */
+#define geode_pms_base()	geode_get_dev_base(GEODE_DEV_PMS)
+#define geode_acpi_base()	geode_get_dev_base(GEODE_DEV_ACPI)
+#define geode_gpio_base()	geode_get_dev_base(GEODE_DEV_GPIO)
+#define geode_mfgpt_base()	geode_get_dev_base(GEODE_DEV_MFGPT)
+
+/* MSRS */
+
+#define MSR_GLIU_P2D_RO0	0x10000029
+
+#define MSR_LX_GLD_MSR_CONFIG	0x48002001
+#define MSR_LX_MSR_PADSEL	0x48002011	/* NOT 0x48000011; the data
+						 * sheet has the wrong value */
+#define MSR_GLCP_SYS_RSTPLL	0x4C000014
+#define MSR_GLCP_DOTPLL		0x4C000015
+
+#define MSR_LBAR_SMB		0x5140000B
+#define MSR_LBAR_GPIO		0x5140000C
+#define MSR_LBAR_MFGPT		0x5140000D
+#define MSR_LBAR_ACPI		0x5140000E
+#define MSR_LBAR_PMS		0x5140000F
+
+#define MSR_DIVIL_SOFT_RESET	0x51400017
+
+#define MSR_PIC_YSEL_LOW	0x51400020
+#define MSR_PIC_YSEL_HIGH	0x51400021
+#define MSR_PIC_ZSEL_LOW	0x51400022
+#define MSR_PIC_ZSEL_HIGH	0x51400023
+#define MSR_PIC_IRQM_LPC	0x51400025
+
+#define MSR_MFGPT_IRQ		0x51400028
+#define MSR_MFGPT_NR		0x51400029
+#define MSR_MFGPT_SETUP		0x5140002B
+
+#define MSR_LX_SPARE_MSR	0x80000011	/* DC-specific */
+
+#define MSR_GX_GLD_MSR_CONFIG	0xC0002001
+#define MSR_GX_MSR_PADSEL	0xC0002011
+
+/* Resource Sizes */
+
+#define LBAR_GPIO_SIZE		0xFF
+#define LBAR_MFGPT_SIZE		0x40
+#define LBAR_ACPI_SIZE		0x40
+#define LBAR_PMS_SIZE		0x80
+
+/* ACPI registers (PMS block) */
+
+/*
+ * PM1_EN is only valid when VSA is enabled for 16 bit reads.
+ * When VSA is not enabled, *always* read both PM1_STS and PM1_EN
+ * with a 32 bit read at offset 0x0
+ */
+
+#define PM1_STS			0x00
+#define PM1_EN			0x02
+#define PM1_CNT			0x08
+#define PM2_CNT			0x0C
+#define PM_TMR			0x10
+#define PM_GPE0_STS		0x18
+#define PM_GPE0_EN		0x1C
+
+/* PMC registers (PMS block) */
+
+#define PM_SSD			0x00
+#define PM_SCXA			0x04
+#define PM_SCYA			0x08
+#define PM_OUT_SLPCTL		0x0C
+#define PM_SCLK			0x10
+#define PM_SED			0x1
+#define PM_SCXD			0x18
+#define PM_SCYD			0x1C
+#define PM_IN_SLPCTL		0x20
+#define PM_WKD			0x30
+#define PM_WKXD			0x34
+#define PM_RD			0x38
+#define PM_WKXA			0x3C
+#define PM_FSD			0x40
+#define PM_TSD			0x44
+#define PM_PSD			0x48
+#define PM_NWKD			0x4C
+#define PM_AWKD			0x50
+#define PM_SSC			0x54
+
+/* VSA2 magic values */
+
+#define VSA_VRC_INDEX		0xAC1C
+#define VSA_VRC_DATA		0xAC1E
+#define VSA_VR_UNLOCK		0xFC53	/* unlock virtual register */
+#define VSA_VR_SIGNATURE	0x0003
+#define VSA_VR_MEM_SIZE		0x0200
+#define AMD_VSA_SIG		0x4132	/* signature is ascii 'VSA2' */
+#define GSW_VSA_SIG		0x534d  /* General Software signature */
+/* GPIO */
+
+#define GPIO_OUTPUT_VAL		0x00
+#define GPIO_OUTPUT_ENABLE	0x04
+#define GPIO_OUTPUT_OPEN_DRAIN	0x08
+#define GPIO_OUTPUT_INVERT	0x0C
+#define GPIO_OUTPUT_AUX1	0x10
+#define GPIO_OUTPUT_AUX2	0x14
+#define GPIO_PULL_UP		0x18
+#define GPIO_PULL_DOWN		0x1C
+#define GPIO_INPUT_ENABLE	0x20
+#define GPIO_INPUT_INVERT	0x24
+#define GPIO_INPUT_FILTER	0x28
+#define GPIO_INPUT_EVENT_COUNT	0x2C
+#define GPIO_READ_BACK		0x30
+#define GPIO_INPUT_AUX1		0x34
+#define GPIO_EVENTS_ENABLE	0x38
+#define GPIO_LOCK_ENABLE	0x3C
+#define GPIO_POSITIVE_EDGE_EN	0x40
+#define GPIO_NEGATIVE_EDGE_EN	0x44
+#define GPIO_POSITIVE_EDGE_STS	0x48
+#define GPIO_NEGATIVE_EDGE_STS	0x4C
+
+#define GPIO_MAP_X		0xE0
+#define GPIO_MAP_Y		0xE4
+#define GPIO_MAP_Z		0xE8
+#define GPIO_MAP_W		0xEC
+
+static inline u32 geode_gpio(unsigned int nr)
+{
+	BUG_ON(nr > 28);
+	return 1 << nr;
+}
+
+extern void geode_gpio_set(u32, unsigned int);
+extern void geode_gpio_clear(u32, unsigned int);
+extern int geode_gpio_isset(u32, unsigned int);
+extern void geode_gpio_setup_event(unsigned int, int, int);
+extern void geode_gpio_set_irq(unsigned int, unsigned int);
+
+static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
+{
+	geode_gpio_setup_event(gpio, pair, 0);
+}
+
+static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
+{
+	geode_gpio_setup_event(gpio, pair, 1);
+}
+
+/* Specific geode tests */
+
+static inline int is_geode_gx(void)
+{
+	return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
+		(boot_cpu_data.x86 == 5) &&
+		(boot_cpu_data.x86_model == 5));
+}
+
+static inline int is_geode_lx(void)
+{
+	return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
+		(boot_cpu_data.x86 == 5) &&
+		(boot_cpu_data.x86_model == 10));
+}
+
+static inline int is_geode(void)
+{
+	return (is_geode_gx() || is_geode_lx());
+}
+
+#ifdef CONFIG_MGEODE_LX
+extern int geode_has_vsa2(void);
+#else
+static inline int geode_has_vsa2(void)
+{
+	return 0;
+}
+#endif
+
+/* MFGPTs */
+
+#define MFGPT_MAX_TIMERS	8
+#define MFGPT_TIMER_ANY		(-1)
+
+#define MFGPT_DOMAIN_WORKING	1
+#define MFGPT_DOMAIN_STANDBY	2
+#define MFGPT_DOMAIN_ANY	(MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
+
+#define MFGPT_CMP1		0
+#define MFGPT_CMP2		1
+
+#define MFGPT_EVENT_IRQ		0
+#define MFGPT_EVENT_NMI		1
+#define MFGPT_EVENT_RESET	3
+
+#define MFGPT_REG_CMP1		0
+#define MFGPT_REG_CMP2		2
+#define MFGPT_REG_COUNTER	4
+#define MFGPT_REG_SETUP		6
+
+#define MFGPT_SETUP_CNTEN	(1 << 15)
+#define MFGPT_SETUP_CMP2	(1 << 14)
+#define MFGPT_SETUP_CMP1	(1 << 13)
+#define MFGPT_SETUP_SETUP	(1 << 12)
+#define MFGPT_SETUP_STOPEN	(1 << 11)
+#define MFGPT_SETUP_EXTEN	(1 << 10)
+#define MFGPT_SETUP_REVEN	(1 << 5)
+#define MFGPT_SETUP_CLKSEL	(1 << 4)
+
+static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
+{
+	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
+	outw(value, base + reg + (timer * 8));
+}
+
+static inline u16 geode_mfgpt_read(int timer, u16 reg)
+{
+	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
+	return inw(base + reg + (timer * 8));
+}
+
+extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
+extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
+extern int geode_mfgpt_alloc_timer(int timer, int domain);
+
+#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
+#define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0)
+
+#ifdef CONFIG_GEODE_MFGPT_TIMER
+extern int __init mfgpt_timer_setup(void);
+#else
+static inline int mfgpt_timer_setup(void) { return 0; }
+#endif
+
+#endif /* _ASM_X86_GEODE_H */
diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h
new file mode 100644
index 0000000..49dbfdf
--- /dev/null
+++ b/arch/x86/include/asm/gpio.h
@@ -0,0 +1,56 @@
+/*
+ * Generic GPIO API implementation for x86.
+ *
+ * Derived from the generic GPIO API for powerpc:
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ASM_X86_GPIO_H
+#define _ASM_X86_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* _ASM_X86_GPIO_H */
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
new file mode 100644
index 0000000..000787d
--- /dev/null
+++ b/arch/x86/include/asm/hardirq.h
@@ -0,0 +1,11 @@
+#ifdef CONFIG_X86_32
+# include "hardirq_32.h"
+#else
+# include "hardirq_64.h"
+#endif
+
+extern u64 arch_irq_stat_cpu(unsigned int cpu);
+#define arch_irq_stat_cpu	arch_irq_stat_cpu
+
+extern u64 arch_irq_stat(void);
+#define arch_irq_stat		arch_irq_stat
diff --git a/arch/x86/include/asm/hardirq_32.h b/arch/x86/include/asm/hardirq_32.h
new file mode 100644
index 0000000..5ca135e
--- /dev/null
+++ b/arch/x86/include/asm/hardirq_32.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_X86_HARDIRQ_32_H
+#define _ASM_X86_HARDIRQ_32_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned long idle_timestamp;
+	unsigned int __nmi_count;	/* arch dependent */
+	unsigned int apic_timer_irqs;	/* arch dependent */
+	unsigned int irq0_irqs;
+	unsigned int irq_resched_count;
+	unsigned int irq_call_count;
+	unsigned int irq_tlb_count;
+	unsigned int irq_thermal_count;
+	unsigned int irq_spurious_count;
+} ____cacheline_aligned irq_cpustat_t;
+
+DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+
+#define __ARCH_IRQ_STAT
+#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
+
+void ack_bad_irq(unsigned int irq);
+#include <linux/irq_cpustat.h>
+
+#endif /* _ASM_X86_HARDIRQ_32_H */
diff --git a/arch/x86/include/asm/hardirq_64.h b/arch/x86/include/asm/hardirq_64.h
new file mode 100644
index 0000000..1ba381f
--- /dev/null
+++ b/arch/x86/include/asm/hardirq_64.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_X86_HARDIRQ_64_H
+#define _ASM_X86_HARDIRQ_64_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <asm/pda.h>
+#include <asm/apic.h>
+
+/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
+#define MAX_HARDIRQS_PER_CPU NR_VECTORS
+
+#define __ARCH_IRQ_STAT 1
+
+#define local_softirq_pending() read_pda(__softirq_pending)
+
+#define __ARCH_SET_SOFTIRQ_PENDING 1
+
+#define set_softirq_pending(x) write_pda(__softirq_pending, (x))
+#define or_softirq_pending(x)  or_pda(__softirq_pending, (x))
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_X86_HARDIRQ_64_H */
diff --git a/arch/x86/include/asm/highmem.h b/arch/x86/include/asm/highmem.h
new file mode 100644
index 0000000..a3b3b7c
--- /dev/null
+++ b/arch/x86/include/asm/highmem.h
@@ -0,0 +1,82 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_X86_HIGHMEM_H
+#define _ASM_X86_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <asm/paravirt.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+/*
+ * Ordering is:
+ *
+ * FIXADDR_TOP
+ * 			fixed_addresses
+ * FIXADDR_START
+ * 			temp fixed addresses
+ * FIXADDR_BOOT_START
+ * 			Persistent kmap area
+ * PKMAP_BASE
+ * VMALLOC_END
+ * 			Vmalloc area
+ * VMALLOC_START
+ * high_memory
+ */
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+void *kmap(struct page *page);
+void kunmap(struct page *page);
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot);
+void *kmap_atomic(struct page *page, enum km_type type);
+void kunmap_atomic(void *kvaddr, enum km_type type);
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+struct page *kmap_atomic_to_page(void *ptr);
+
+#ifndef CONFIG_PARAVIRT
+#define kmap_atomic_pte(page, type)	kmap_atomic(page, type)
+#endif
+
+#define flush_cache_kmaps()	do { } while (0)
+
+extern void add_highpages_with_active_regions(int nid, unsigned long start_pfn,
+					unsigned long end_pfn);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_HIGHMEM_H */
diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h
new file mode 100644
index 0000000..1c22cb0
--- /dev/null
+++ b/arch/x86/include/asm/hpet.h
@@ -0,0 +1,114 @@
+#ifndef _ASM_X86_HPET_H
+#define _ASM_X86_HPET_H
+
+#include <linux/msi.h>
+
+#ifdef CONFIG_HPET_TIMER
+
+#define HPET_MMAP_SIZE		1024
+
+#define HPET_ID			0x000
+#define HPET_PERIOD		0x004
+#define HPET_CFG		0x010
+#define HPET_STATUS		0x020
+#define HPET_COUNTER		0x0f0
+
+#define HPET_Tn_CFG(n)		(0x100 + 0x20 * n)
+#define HPET_Tn_CMP(n)		(0x108 + 0x20 * n)
+#define HPET_Tn_ROUTE(n)	(0x110 + 0x20 * n)
+
+#define HPET_T0_CFG		0x100
+#define HPET_T0_CMP		0x108
+#define HPET_T0_ROUTE		0x110
+#define HPET_T1_CFG		0x120
+#define HPET_T1_CMP		0x128
+#define HPET_T1_ROUTE		0x130
+#define HPET_T2_CFG		0x140
+#define HPET_T2_CMP		0x148
+#define HPET_T2_ROUTE		0x150
+
+#define HPET_ID_REV		0x000000ff
+#define HPET_ID_NUMBER		0x00001f00
+#define HPET_ID_64BIT		0x00002000
+#define HPET_ID_LEGSUP		0x00008000
+#define HPET_ID_VENDOR		0xffff0000
+#define	HPET_ID_NUMBER_SHIFT	8
+#define HPET_ID_VENDOR_SHIFT	16
+
+#define HPET_ID_VENDOR_8086	0x8086
+
+#define HPET_CFG_ENABLE		0x001
+#define HPET_CFG_LEGACY		0x002
+#define	HPET_LEGACY_8254	2
+#define	HPET_LEGACY_RTC		8
+
+#define HPET_TN_LEVEL		0x0002
+#define HPET_TN_ENABLE		0x0004
+#define HPET_TN_PERIODIC	0x0008
+#define HPET_TN_PERIODIC_CAP	0x0010
+#define HPET_TN_64BIT_CAP	0x0020
+#define HPET_TN_SETVAL		0x0040
+#define HPET_TN_32BIT		0x0100
+#define HPET_TN_ROUTE		0x3e00
+#define HPET_TN_FSB		0x4000
+#define HPET_TN_FSB_CAP		0x8000
+#define HPET_TN_ROUTE_SHIFT	9
+
+/* Max HPET Period is 10^8 femto sec as in HPET spec */
+#define HPET_MAX_PERIOD		100000000UL
+/*
+ * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
+ * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
+ */
+#define HPET_MIN_PERIOD		100000UL
+
+/* hpet memory map physical address */
+extern unsigned long hpet_address;
+extern unsigned long force_hpet_address;
+extern int hpet_force_user;
+extern int is_hpet_enabled(void);
+extern int hpet_enable(void);
+extern void hpet_disable(void);
+extern unsigned long hpet_readl(unsigned long a);
+extern void force_hpet_resume(void);
+
+extern void hpet_msi_unmask(unsigned int irq);
+extern void hpet_msi_mask(unsigned int irq);
+extern void hpet_msi_write(unsigned int irq, struct msi_msg *msg);
+extern void hpet_msi_read(unsigned int irq, struct msi_msg *msg);
+
+#ifdef CONFIG_PCI_MSI
+extern int arch_setup_hpet_msi(unsigned int irq);
+#else
+static inline int arch_setup_hpet_msi(unsigned int irq)
+{
+	return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_HPET_EMULATE_RTC
+
+#include <linux/interrupt.h>
+
+typedef irqreturn_t (*rtc_irq_handler)(int interrupt, void *cookie);
+extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
+			       unsigned char sec);
+extern int hpet_set_periodic_freq(unsigned long freq);
+extern int hpet_rtc_dropped_irq(void);
+extern int hpet_rtc_timer_init(void);
+extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
+extern int hpet_register_irq_handler(rtc_irq_handler handler);
+extern void hpet_unregister_irq_handler(rtc_irq_handler handler);
+
+#endif /* CONFIG_HPET_EMULATE_RTC */
+
+#else /* CONFIG_HPET_TIMER */
+
+static inline int hpet_enable(void) { return 0; }
+static inline int is_hpet_enabled(void) { return 0; }
+#define hpet_readl(a) 0
+
+#endif
+#endif /* _ASM_X86_HPET_H */
diff --git a/arch/x86/include/asm/hugetlb.h b/arch/x86/include/asm/hugetlb.h
new file mode 100644
index 0000000..439a9ac
--- /dev/null
+++ b/arch/x86/include/asm/hugetlb.h
@@ -0,0 +1,93 @@
+#ifndef _ASM_X86_HUGETLB_H
+#define _ASM_X86_HUGETLB_H
+
+#include <asm/page.h>
+
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	struct hstate *h = hstate_file(file);
+	if (len & ~huge_page_mask(h))
+		return -EINVAL;
+	if (addr & ~huge_page_mask(h))
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) {
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte_at(mm, addr, ptep, pte);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_X86_HUGETLB_H */
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
new file mode 100644
index 0000000..b97aecb
--- /dev/null
+++ b/arch/x86/include/asm/hw_irq.h
@@ -0,0 +1,131 @@
+#ifndef _ASM_X86_HW_IRQ_H
+#define _ASM_X86_HW_IRQ_H
+
+/*
+ * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * moved some of the old arch/i386/kernel/irq.h to here. VY
+ *
+ * IRQ/IPI changes taken from work by Thomas Radke
+ * <tomsoft@informatik.tu-chemnitz.de>
+ *
+ * hacked by Andi Kleen for x86-64.
+ * unified by tglx
+ */
+
+#include <asm/irq_vectors.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/percpu.h>
+#include <linux/profile.h>
+#include <linux/smp.h>
+
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+
+#define platform_legacy_irq(irq)	((irq) < 16)
+
+/* Interrupt handlers registered during init_IRQ */
+extern void apic_timer_interrupt(void);
+extern void error_interrupt(void);
+extern void spurious_interrupt(void);
+extern void thermal_interrupt(void);
+extern void reschedule_interrupt(void);
+
+extern void invalidate_interrupt(void);
+extern void invalidate_interrupt0(void);
+extern void invalidate_interrupt1(void);
+extern void invalidate_interrupt2(void);
+extern void invalidate_interrupt3(void);
+extern void invalidate_interrupt4(void);
+extern void invalidate_interrupt5(void);
+extern void invalidate_interrupt6(void);
+extern void invalidate_interrupt7(void);
+
+extern void irq_move_cleanup_interrupt(void);
+extern void threshold_interrupt(void);
+
+extern void call_function_interrupt(void);
+extern void call_function_single_interrupt(void);
+
+/* PIC specific functions */
+extern void disable_8259A_irq(unsigned int irq);
+extern void enable_8259A_irq(unsigned int irq);
+extern int i8259A_irq_pending(unsigned int irq);
+extern void make_8259A_irq(unsigned int irq);
+extern void init_8259A(int aeoi);
+
+/* IOAPIC */
+#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
+extern unsigned long io_apic_irqs;
+
+extern void init_VISWS_APIC_irqs(void);
+extern void setup_IO_APIC(void);
+extern void disable_IO_APIC(void);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+extern void setup_ioapic_dest(void);
+
+#ifdef CONFIG_X86_64
+extern void enable_IO_APIC(void);
+#endif
+
+/* IPI functions */
+#ifdef CONFIG_X86_32
+extern void send_IPI_self(int vector);
+#endif
+extern void send_IPI(int dest, int vector);
+
+/* Statistics */
+extern atomic_t irq_err_count;
+extern atomic_t irq_mis_count;
+
+/* EISA */
+extern void eisa_set_level_irq(unsigned int irq);
+
+/* Voyager functions */
+extern asmlinkage void vic_cpi_interrupt(void);
+extern asmlinkage void vic_sys_interrupt(void);
+extern asmlinkage void vic_cmn_interrupt(void);
+extern asmlinkage void qic_timer_interrupt(void);
+extern asmlinkage void qic_invalidate_interrupt(void);
+extern asmlinkage void qic_reschedule_interrupt(void);
+extern asmlinkage void qic_enable_irq_interrupt(void);
+extern asmlinkage void qic_call_function_interrupt(void);
+
+/* SMP */
+extern void smp_apic_timer_interrupt(struct pt_regs *);
+extern void smp_spurious_interrupt(struct pt_regs *);
+extern void smp_error_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_SMP
+extern void smp_reschedule_interrupt(struct pt_regs *);
+extern void smp_call_function_interrupt(struct pt_regs *);
+extern void smp_call_function_single_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_32
+extern void smp_invalidate_interrupt(struct pt_regs *);
+#else
+extern asmlinkage void smp_invalidate_interrupt(struct pt_regs *);
+#endif
+#endif
+
+#ifdef CONFIG_X86_32
+extern void (*const interrupt[NR_VECTORS])(void);
+#endif
+
+typedef int vector_irq_t[NR_VECTORS];
+DECLARE_PER_CPU(vector_irq_t, vector_irq);
+
+#ifdef CONFIG_X86_IO_APIC
+extern void lock_vector_lock(void);
+extern void unlock_vector_lock(void);
+extern void __setup_vector_irq(int cpu);
+#else
+static inline void lock_vector_lock(void) {}
+static inline void unlock_vector_lock(void) {}
+static inline void __setup_vector_irq(int cpu) {}
+#endif
+
+#endif /* !ASSEMBLY_ */
+
+#endif /* _ASM_X86_HW_IRQ_H */
diff --git a/arch/x86/include/asm/hypertransport.h b/arch/x86/include/asm/hypertransport.h
new file mode 100644
index 0000000..334b1a8
--- /dev/null
+++ b/arch/x86/include/asm/hypertransport.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_X86_HYPERTRANSPORT_H
+#define _ASM_X86_HYPERTRANSPORT_H
+
+/*
+ * Constants for x86 Hypertransport Interrupts.
+ */
+
+#define HT_IRQ_LOW_BASE			0xf8000000
+
+#define HT_IRQ_LOW_VECTOR_SHIFT		16
+#define HT_IRQ_LOW_VECTOR_MASK		0x00ff0000
+#define HT_IRQ_LOW_VECTOR(v)						\
+	(((v) << HT_IRQ_LOW_VECTOR_SHIFT) & HT_IRQ_LOW_VECTOR_MASK)
+
+#define HT_IRQ_LOW_DEST_ID_SHIFT	8
+#define HT_IRQ_LOW_DEST_ID_MASK		0x0000ff00
+#define HT_IRQ_LOW_DEST_ID(v)						\
+	(((v) << HT_IRQ_LOW_DEST_ID_SHIFT) & HT_IRQ_LOW_DEST_ID_MASK)
+
+#define HT_IRQ_LOW_DM_PHYSICAL		0x0000000
+#define HT_IRQ_LOW_DM_LOGICAL		0x0000040
+
+#define HT_IRQ_LOW_RQEOI_EDGE		0x0000000
+#define HT_IRQ_LOW_RQEOI_LEVEL		0x0000020
+
+
+#define HT_IRQ_LOW_MT_FIXED		0x0000000
+#define HT_IRQ_LOW_MT_ARBITRATED	0x0000004
+#define HT_IRQ_LOW_MT_SMI		0x0000008
+#define HT_IRQ_LOW_MT_NMI		0x000000c
+#define HT_IRQ_LOW_MT_INIT		0x0000010
+#define HT_IRQ_LOW_MT_STARTUP		0x0000014
+#define HT_IRQ_LOW_MT_EXTINT		0x0000018
+#define HT_IRQ_LOW_MT_LINT1		0x000008c
+#define HT_IRQ_LOW_MT_LINT0		0x0000098
+
+#define HT_IRQ_LOW_IRQ_MASKED		0x0000001
+
+
+#define HT_IRQ_HIGH_DEST_ID_SHIFT	0
+#define HT_IRQ_HIGH_DEST_ID_MASK	0x00ffffff
+#define HT_IRQ_HIGH_DEST_ID(v)						\
+	((((v) >> 8) << HT_IRQ_HIGH_DEST_ID_SHIFT) & HT_IRQ_HIGH_DEST_ID_MASK)
+
+#endif /* _ASM_X86_HYPERTRANSPORT_H */
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
new file mode 100644
index 0000000..48f0004
--- /dev/null
+++ b/arch/x86/include/asm/i387.h
@@ -0,0 +1,400 @@
+/*
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * Pentium III FXSR, SSE support
+ * General FPU state handling cleanups
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ * x86-64 work by Andi Kleen 2002
+ */
+
+#ifndef _ASM_X86_I387_H
+#define _ASM_X86_I387_H
+
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/regset.h>
+#include <linux/hardirq.h>
+#include <asm/asm.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+#include <asm/uaccess.h>
+#include <asm/xsave.h>
+
+extern unsigned int sig_xstate_size;
+extern void fpu_init(void);
+extern void mxcsr_feature_mask_init(void);
+extern int init_fpu(struct task_struct *child);
+extern asmlinkage void math_state_restore(void);
+extern void init_thread_xstate(void);
+extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
+
+extern user_regset_active_fn fpregs_active, xfpregs_active;
+extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
+extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
+
+extern struct _fpx_sw_bytes fx_sw_reserved;
+#ifdef CONFIG_IA32_EMULATION
+extern unsigned int sig_xstate_ia32_size;
+extern struct _fpx_sw_bytes fx_sw_reserved_ia32;
+struct _fpstate_ia32;
+struct _xstate_ia32;
+extern int save_i387_xstate_ia32(void __user *buf);
+extern int restore_i387_xstate_ia32(void __user *buf);
+#endif
+
+#define X87_FSW_ES (1 << 7)	/* Exception Summary */
+
+#ifdef CONFIG_X86_64
+
+/* Ignore delayed exceptions from user space */
+static inline void tolerant_fwait(void)
+{
+	asm volatile("1: fwait\n"
+		     "2:\n"
+		     _ASM_EXTABLE(1b, 2b));
+}
+
+static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
+{
+	int err;
+
+	asm volatile("1:  rex64/fxrstor (%[fx])\n\t"
+		     "2:\n"
+		     ".section .fixup,\"ax\"\n"
+		     "3:  movl $-1,%[err]\n"
+		     "    jmp  2b\n"
+		     ".previous\n"
+		     _ASM_EXTABLE(1b, 3b)
+		     : [err] "=r" (err)
+#if 0 /* See comment in __save_init_fpu() below. */
+		     : [fx] "r" (fx), "m" (*fx), "0" (0));
+#else
+		     : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
+#endif
+	return err;
+}
+
+static inline int restore_fpu_checking(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE)
+		return xrstor_checking(&tsk->thread.xstate->xsave);
+	else
+		return fxrstor_checking(&tsk->thread.xstate->fxsave);
+}
+
+/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
+   is pending. Clear the x87 state here by setting it to fixed
+   values. The kernel data segment can be sometimes 0 and sometimes
+   new user value. Both should be ok.
+   Use the PDA as safe address because it should be already in L1. */
+static inline void clear_fpu_state(struct task_struct *tsk)
+{
+	struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
+	struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+
+	/*
+	 * xsave header may indicate the init state of the FP.
+	 */
+	if ((task_thread_info(tsk)->status & TS_XSAVE) &&
+	    !(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
+		return;
+
+	if (unlikely(fx->swd & X87_FSW_ES))
+		asm volatile("fnclex");
+	alternative_input(ASM_NOP8 ASM_NOP2,
+			  "    emms\n"		/* clear stack tags */
+			  "    fildl %%gs:0",	/* load to clear state */
+			  X86_FEATURE_FXSAVE_LEAK);
+}
+
+static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
+{
+	int err;
+
+	asm volatile("1:  rex64/fxsave (%[fx])\n\t"
+		     "2:\n"
+		     ".section .fixup,\"ax\"\n"
+		     "3:  movl $-1,%[err]\n"
+		     "    jmp  2b\n"
+		     ".previous\n"
+		     _ASM_EXTABLE(1b, 3b)
+		     : [err] "=r" (err), "=m" (*fx)
+#if 0 /* See comment in __fxsave_clear() below. */
+		     : [fx] "r" (fx), "0" (0));
+#else
+		     : [fx] "cdaSDb" (fx), "0" (0));
+#endif
+	if (unlikely(err) &&
+	    __clear_user(fx, sizeof(struct i387_fxsave_struct)))
+		err = -EFAULT;
+	/* No need to clear here because the caller clears USED_MATH */
+	return err;
+}
+
+static inline void fxsave(struct task_struct *tsk)
+{
+	/* Using "rex64; fxsave %0" is broken because, if the memory operand
+	   uses any extended registers for addressing, a second REX prefix
+	   will be generated (to the assembler, rex64 followed by semicolon
+	   is a separate instruction), and hence the 64-bitness is lost. */
+#if 0
+	/* Using "fxsaveq %0" would be the ideal choice, but is only supported
+	   starting with gas 2.16. */
+	__asm__ __volatile__("fxsaveq %0"
+			     : "=m" (tsk->thread.xstate->fxsave));
+#elif 0
+	/* Using, as a workaround, the properly prefixed form below isn't
+	   accepted by any binutils version so far released, complaining that
+	   the same type of prefix is used twice if an extended register is
+	   needed for addressing (fix submitted to mainline 2005-11-21). */
+	__asm__ __volatile__("rex64/fxsave %0"
+			     : "=m" (tsk->thread.xstate->fxsave));
+#else
+	/* This, however, we can work around by forcing the compiler to select
+	   an addressing mode that doesn't require extended registers. */
+	__asm__ __volatile__("rex64/fxsave (%1)"
+			     : "=m" (tsk->thread.xstate->fxsave)
+			     : "cdaSDb" (&tsk->thread.xstate->fxsave));
+#endif
+}
+
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE)
+		xsave(tsk);
+	else
+		fxsave(tsk);
+
+	clear_fpu_state(tsk);
+	task_thread_info(tsk)->status &= ~TS_USEDFPU;
+}
+
+#else  /* CONFIG_X86_32 */
+
+extern void finit(void);
+
+static inline void tolerant_fwait(void)
+{
+	asm volatile("fnclex ; fwait");
+}
+
+static inline void restore_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE) {
+		xrstor_checking(&tsk->thread.xstate->xsave);
+		return;
+	}
+	/*
+	 * The "nop" is needed to make the instructions the same
+	 * length.
+	 */
+	alternative_input(
+		"nop ; frstor %1",
+		"fxrstor %1",
+		X86_FEATURE_FXSR,
+		"m" (tsk->thread.xstate->fxsave));
+}
+
+/* We need a safe address that is cheap to find and that is already
+   in L1 during context switch. The best choices are unfortunately
+   different for UP and SMP */
+#ifdef CONFIG_SMP
+#define safe_address (__per_cpu_offset[0])
+#else
+#define safe_address (kstat_cpu(0).cpustat.user)
+#endif
+
+/*
+ * These must be called with preempt disabled
+ */
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE) {
+		struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
+		struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+
+		xsave(tsk);
+
+		/*
+		 * xsave header may indicate the init state of the FP.
+		 */
+		if (!(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
+			goto end;
+
+		if (unlikely(fx->swd & X87_FSW_ES))
+			asm volatile("fnclex");
+
+		/*
+		 * we can do a simple return here or be paranoid :)
+		 */
+		goto clear_state;
+	}
+
+	/* Use more nops than strictly needed in case the compiler
+	   varies code */
+	alternative_input(
+		"fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
+		"fxsave %[fx]\n"
+		"bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
+		X86_FEATURE_FXSR,
+		[fx] "m" (tsk->thread.xstate->fxsave),
+		[fsw] "m" (tsk->thread.xstate->fxsave.swd) : "memory");
+clear_state:
+	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+	   is pending.  Clear the x87 state here by setting it to fixed
+	   values. safe_address is a random variable that should be in L1 */
+	alternative_input(
+		GENERIC_NOP8 GENERIC_NOP2,
+		"emms\n\t"	  	/* clear stack tags */
+		"fildl %[addr]", 	/* set F?P to defined value */
+		X86_FEATURE_FXSAVE_LEAK,
+		[addr] "m" (safe_address));
+end:
+	task_thread_info(tsk)->status &= ~TS_USEDFPU;
+}
+
+#endif	/* CONFIG_X86_64 */
+
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387_xstate(void __user *buf);
+extern int restore_i387_xstate(void __user *buf);
+
+static inline void __unlazy_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		__save_init_fpu(tsk);
+		stts();
+	} else
+		tsk->fpu_counter = 0;
+}
+
+static inline void __clear_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		tolerant_fwait();
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		stts();
+	}
+}
+
+static inline void kernel_fpu_begin(void)
+{
+	struct thread_info *me = current_thread_info();
+	preempt_disable();
+	if (me->status & TS_USEDFPU)
+		__save_init_fpu(me->task);
+	else
+		clts();
+}
+
+static inline void kernel_fpu_end(void)
+{
+	stts();
+	preempt_enable();
+}
+
+/*
+ * Some instructions like VIA's padlock instructions generate a spurious
+ * DNA fault but don't modify SSE registers. And these instructions
+ * get used from interrupt context aswell. To prevent these kernel instructions
+ * in interrupt context interact wrongly with other user/kernel fpu usage, we
+ * should use them only in the context of irq_ts_save/restore()
+ */
+static inline int irq_ts_save(void)
+{
+	/*
+	 * If we are in process context, we are ok to take a spurious DNA fault.
+	 * Otherwise, doing clts() in process context require pre-emption to
+	 * be disabled or some heavy lifting like kernel_fpu_begin()
+	 */
+	if (!in_interrupt())
+		return 0;
+
+	if (read_cr0() & X86_CR0_TS) {
+		clts();
+		return 1;
+	}
+
+	return 0;
+}
+
+static inline void irq_ts_restore(int TS_state)
+{
+	if (TS_state)
+		stts();
+}
+
+#ifdef CONFIG_X86_64
+
+static inline void save_init_fpu(struct task_struct *tsk)
+{
+	__save_init_fpu(tsk);
+	stts();
+}
+
+#define unlazy_fpu	__unlazy_fpu
+#define clear_fpu	__clear_fpu
+
+#else  /* CONFIG_X86_32 */
+
+/*
+ * These disable preemption on their own and are safe
+ */
+static inline void save_init_fpu(struct task_struct *tsk)
+{
+	preempt_disable();
+	__save_init_fpu(tsk);
+	stts();
+	preempt_enable();
+}
+
+static inline void unlazy_fpu(struct task_struct *tsk)
+{
+	preempt_disable();
+	__unlazy_fpu(tsk);
+	preempt_enable();
+}
+
+static inline void clear_fpu(struct task_struct *tsk)
+{
+	preempt_disable();
+	__clear_fpu(tsk);
+	preempt_enable();
+}
+
+#endif	/* CONFIG_X86_64 */
+
+/*
+ * i387 state interaction
+ */
+static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
+{
+	if (cpu_has_fxsr) {
+		return tsk->thread.xstate->fxsave.cwd;
+	} else {
+		return (unsigned short)tsk->thread.xstate->fsave.cwd;
+	}
+}
+
+static inline unsigned short get_fpu_swd(struct task_struct *tsk)
+{
+	if (cpu_has_fxsr) {
+		return tsk->thread.xstate->fxsave.swd;
+	} else {
+		return (unsigned short)tsk->thread.xstate->fsave.swd;
+	}
+}
+
+static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
+{
+	if (cpu_has_xmm) {
+		return tsk->thread.xstate->fxsave.mxcsr;
+	} else {
+		return MXCSR_DEFAULT;
+	}
+}
+
+#endif /* _ASM_X86_I387_H */
diff --git a/arch/x86/include/asm/i8253.h b/arch/x86/include/asm/i8253.h
new file mode 100644
index 0000000..1edbf89
--- /dev/null
+++ b/arch/x86/include/asm/i8253.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_I8253_H
+#define _ASM_X86_I8253_H
+
+/* i8253A PIT registers */
+#define PIT_MODE		0x43
+#define PIT_CH0			0x40
+#define PIT_CH2			0x42
+
+extern spinlock_t i8253_lock;
+
+extern struct clock_event_device *global_clock_event;
+
+extern void setup_pit_timer(void);
+
+#define inb_pit		inb_p
+#define outb_pit	outb_p
+
+#endif /* _ASM_X86_I8253_H */
diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h
new file mode 100644
index 0000000..58d7091
--- /dev/null
+++ b/arch/x86/include/asm/i8259.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_X86_I8259_H
+#define _ASM_X86_I8259_H
+
+#include <linux/delay.h>
+
+extern unsigned int cached_irq_mask;
+
+#define __byte(x, y)		(((unsigned char *)&(y))[x])
+#define cached_master_mask	(__byte(0, cached_irq_mask))
+#define cached_slave_mask	(__byte(1, cached_irq_mask))
+
+/* i8259A PIC registers */
+#define PIC_MASTER_CMD		0x20
+#define PIC_MASTER_IMR		0x21
+#define PIC_MASTER_ISR		PIC_MASTER_CMD
+#define PIC_MASTER_POLL		PIC_MASTER_ISR
+#define PIC_MASTER_OCW3		PIC_MASTER_ISR
+#define PIC_SLAVE_CMD		0xa0
+#define PIC_SLAVE_IMR		0xa1
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR		2
+#define MASTER_ICW4_DEFAULT	0x01
+#define SLAVE_ICW4_DEFAULT	0x01
+#define PIC_ICW4_AEOI		2
+
+extern spinlock_t i8259A_lock;
+
+extern void init_8259A(int auto_eoi);
+extern void enable_8259A_irq(unsigned int irq);
+extern void disable_8259A_irq(unsigned int irq);
+extern unsigned int startup_8259A_irq(unsigned int irq);
+
+/* the PIC may need a careful delay on some platforms, hence specific calls */
+static inline unsigned char inb_pic(unsigned int port)
+{
+	unsigned char value = inb(port);
+
+	/*
+	 * delay for some accesses to PIC on motherboard or in chipset
+	 * must be at least one microsecond, so be safe here:
+	 */
+	udelay(2);
+
+	return value;
+}
+
+static inline void outb_pic(unsigned char value, unsigned int port)
+{
+	outb(value, port);
+	/*
+	 * delay for some accesses to PIC on motherboard or in chipset
+	 * must be at least one microsecond, so be safe here:
+	 */
+	udelay(2);
+}
+
+extern struct irq_chip i8259A_chip;
+
+extern void mask_8259A(void);
+extern void unmask_8259A(void);
+
+#endif /* _ASM_X86_I8259_H */
diff --git a/arch/x86/include/asm/ia32.h b/arch/x86/include/asm/ia32.h
new file mode 100644
index 0000000..97989c0
--- /dev/null
+++ b/arch/x86/include/asm/ia32.h
@@ -0,0 +1,170 @@
+#ifndef _ASM_X86_IA32_H
+#define _ASM_X86_IA32_H
+
+
+#ifdef CONFIG_IA32_EMULATION
+
+#include <linux/compat.h>
+
+/*
+ * 32 bit structures for IA32 support.
+ */
+
+#include <asm/sigcontext32.h>
+
+/* signal.h */
+struct sigaction32 {
+	unsigned int  sa_handler;	/* Really a pointer, but need to deal
+					   with 32 bits */
+	unsigned int sa_flags;
+	unsigned int sa_restorer;	/* Another 32 bit pointer */
+	compat_sigset_t sa_mask;	/* A 32 bit mask */
+};
+
+struct old_sigaction32 {
+	unsigned int  sa_handler;	/* Really a pointer, but need to deal
+					   with 32 bits */
+	compat_old_sigset_t sa_mask;	/* A 32 bit mask */
+	unsigned int sa_flags;
+	unsigned int sa_restorer;	/* Another 32 bit pointer */
+};
+
+typedef struct sigaltstack_ia32 {
+	unsigned int	ss_sp;
+	int		ss_flags;
+	unsigned int	ss_size;
+} stack_ia32_t;
+
+struct ucontext_ia32 {
+	unsigned int	  uc_flags;
+	unsigned int 	  uc_link;
+	stack_ia32_t	  uc_stack;
+	struct sigcontext_ia32 uc_mcontext;
+	compat_sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+/* This matches struct stat64 in glibc2.2, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char		__pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned int		__st_ino;
+
+	unsigned int		st_mode;
+	unsigned int		st_nlink;
+
+	unsigned int		st_uid;
+	unsigned int		st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char		__pad3[4];
+
+	long long		st_size;
+	unsigned int		st_blksize;
+
+	long long		st_blocks;/* Number 512-byte blocks allocated */
+
+	unsigned 		st_atime;
+	unsigned 		st_atime_nsec;
+	unsigned 		st_mtime;
+	unsigned 		st_mtime_nsec;
+	unsigned 		st_ctime;
+	unsigned 		st_ctime_nsec;
+
+	unsigned long long	st_ino;
+} __attribute__((packed));
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[((128 / sizeof(int)) - 3)];
+
+		/* kill() */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;	/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+			int _sys_private;	/* not to be passed to user */
+			int _overrun_incr;	/* amount to add to overrun */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			unsigned int _pid;	/* which child */
+			unsigned int _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			unsigned int _addr;	/* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
+struct sigframe32 {
+	u32 pretcode;
+	int sig;
+	struct sigcontext_ia32 sc;
+	struct _fpstate_ia32 fpstate;
+	unsigned int extramask[_COMPAT_NSIG_WORDS-1];
+};
+
+struct rt_sigframe32 {
+	u32 pretcode;
+	int sig;
+	u32 pinfo;
+	u32 puc;
+	compat_siginfo_t info;
+	struct ucontext_ia32 uc;
+	struct _fpstate_ia32 fpstate;
+};
+
+struct ustat32 {
+	__u32			f_tfree;
+	compat_ino_t		f_tinode;
+	char			f_fname[6];
+	char			f_fpack[6];
+};
+
+#define IA32_STACK_TOP IA32_PAGE_OFFSET
+
+#ifdef __KERNEL__
+struct linux_binprm;
+extern int ia32_setup_arg_pages(struct linux_binprm *bprm,
+				unsigned long stack_top, int exec_stack);
+struct mm_struct;
+extern void ia32_pick_mmap_layout(struct mm_struct *mm);
+
+#endif
+
+#endif /* !CONFIG_IA32_SUPPORT */
+
+#endif /* _ASM_X86_IA32_H */
diff --git a/arch/x86/include/asm/ia32_unistd.h b/arch/x86/include/asm/ia32_unistd.h
new file mode 100644
index 0000000..976f6ec
--- /dev/null
+++ b/arch/x86/include/asm/ia32_unistd.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_IA32_UNISTD_H
+#define _ASM_X86_IA32_UNISTD_H
+
+/*
+ * This file contains the system call numbers of the ia32 port,
+ * this is for the kernel only.
+ * Only add syscalls here where some part of the kernel needs to know
+ * the number. This should be otherwise in sync with asm-x86/unistd_32.h. -AK
+ */
+
+#define __NR_ia32_restart_syscall 0
+#define __NR_ia32_exit		  1
+#define __NR_ia32_read		  3
+#define __NR_ia32_write		  4
+#define __NR_ia32_sigreturn	119
+#define __NR_ia32_rt_sigreturn	173
+
+#endif /* _ASM_X86_IA32_UNISTD_H */
diff --git a/arch/x86/include/asm/idle.h b/arch/x86/include/asm/idle.h
new file mode 100644
index 0000000..44c89c3
--- /dev/null
+++ b/arch/x86/include/asm/idle.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_X86_IDLE_H
+#define _ASM_X86_IDLE_H
+
+#define IDLE_START 1
+#define IDLE_END 2
+
+struct notifier_block;
+void idle_notifier_register(struct notifier_block *n);
+void idle_notifier_unregister(struct notifier_block *n);
+
+void enter_idle(void);
+void exit_idle(void);
+
+void c1e_remove_cpu(int cpu);
+
+#endif /* _ASM_X86_IDLE_H */
diff --git a/arch/x86/include/asm/intel_arch_perfmon.h b/arch/x86/include/asm/intel_arch_perfmon.h
new file mode 100644
index 0000000..fa0fd06
--- /dev/null
+++ b/arch/x86/include/asm/intel_arch_perfmon.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_X86_INTEL_ARCH_PERFMON_H
+#define _ASM_X86_INTEL_ARCH_PERFMON_H
+
+#define MSR_ARCH_PERFMON_PERFCTR0		0xc1
+#define MSR_ARCH_PERFMON_PERFCTR1		0xc2
+
+#define MSR_ARCH_PERFMON_EVENTSEL0		0x186
+#define MSR_ARCH_PERFMON_EVENTSEL1		0x187
+
+#define ARCH_PERFMON_EVENTSEL0_ENABLE	(1 << 22)
+#define ARCH_PERFMON_EVENTSEL_INT	(1 << 20)
+#define ARCH_PERFMON_EVENTSEL_OS	(1 << 17)
+#define ARCH_PERFMON_EVENTSEL_USR	(1 << 16)
+
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL	(0x3c)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK	(0x00 << 8)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX (0)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
+	(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
+
+union cpuid10_eax {
+	struct {
+		unsigned int version_id:8;
+		unsigned int num_counters:8;
+		unsigned int bit_width:8;
+		unsigned int mask_length:8;
+	} split;
+	unsigned int full;
+};
+
+#endif /* _ASM_X86_INTEL_ARCH_PERFMON_H */
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
new file mode 100644
index 0000000..5618a10
--- /dev/null
+++ b/arch/x86/include/asm/io.h
@@ -0,0 +1,91 @@
+#ifndef _ASM_X86_IO_H
+#define _ASM_X86_IO_H
+
+#define ARCH_HAS_IOREMAP_WC
+
+#include <linux/compiler.h>
+
+#define build_mmio_read(name, size, type, reg, barrier) \
+static inline type name(const volatile void __iomem *addr) \
+{ type ret; asm volatile("mov" size " %1,%0":reg (ret) \
+:"m" (*(volatile type __force *)addr) barrier); return ret; }
+
+#define build_mmio_write(name, size, type, reg, barrier) \
+static inline void name(type val, volatile void __iomem *addr) \
+{ asm volatile("mov" size " %0,%1": :reg (val), \
+"m" (*(volatile type __force *)addr) barrier); }
+
+build_mmio_read(readb, "b", unsigned char, "=q", :"memory")
+build_mmio_read(readw, "w", unsigned short, "=r", :"memory")
+build_mmio_read(readl, "l", unsigned int, "=r", :"memory")
+
+build_mmio_read(__readb, "b", unsigned char, "=q", )
+build_mmio_read(__readw, "w", unsigned short, "=r", )
+build_mmio_read(__readl, "l", unsigned int, "=r", )
+
+build_mmio_write(writeb, "b", unsigned char, "q", :"memory")
+build_mmio_write(writew, "w", unsigned short, "r", :"memory")
+build_mmio_write(writel, "l", unsigned int, "r", :"memory")
+
+build_mmio_write(__writeb, "b", unsigned char, "q", )
+build_mmio_write(__writew, "w", unsigned short, "r", )
+build_mmio_write(__writel, "l", unsigned int, "r", )
+
+#define readb_relaxed(a) __readb(a)
+#define readw_relaxed(a) __readw(a)
+#define readl_relaxed(a) __readl(a)
+#define __raw_readb __readb
+#define __raw_readw __readw
+#define __raw_readl __readl
+
+#define __raw_writeb __writeb
+#define __raw_writew __writew
+#define __raw_writel __writel
+
+#define mmiowb() barrier()
+
+#ifdef CONFIG_X86_64
+build_mmio_read(readq, "q", unsigned long, "=r", :"memory")
+build_mmio_read(__readq, "q", unsigned long, "=r", )
+build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
+build_mmio_write(__writeq, "q", unsigned long, "r", )
+
+#define readq_relaxed(a) __readq(a)
+#define __raw_readq __readq
+#define __raw_writeq writeq
+
+/* Let people know we have them */
+#define readq readq
+#define writeq writeq
+#endif
+
+extern int iommu_bio_merge;
+
+#ifdef CONFIG_X86_32
+# include "io_32.h"
+#else
+# include "io_64.h"
+#endif
+
+extern void *xlate_dev_mem_ptr(unsigned long phys);
+extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
+
+extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
+				unsigned long prot_val);
+extern void __iomem *ioremap_wc(unsigned long offset, unsigned long size);
+
+/*
+ * early_ioremap() and early_iounmap() are for temporary early boot-time
+ * mappings, before the real ioremap() is functional.
+ * A boot-time mapping is currently limited to at most 16 pages.
+ */
+extern void early_ioremap_init(void);
+extern void early_ioremap_clear(void);
+extern void early_ioremap_reset(void);
+extern void *early_ioremap(unsigned long offset, unsigned long size);
+extern void *early_memremap(unsigned long offset, unsigned long size);
+extern void early_iounmap(void *addr, unsigned long size);
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+
+
+#endif /* _ASM_X86_IO_H */
diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h
new file mode 100644
index 0000000..d8e242e
--- /dev/null
+++ b/arch/x86/include/asm/io_32.h
@@ -0,0 +1,284 @@
+#ifndef _ASM_X86_IO_32_H
+#define _ASM_X86_IO_32_H
+
+#include <linux/string.h>
+#include <linux/compiler.h>
+
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ */
+
+ /*
+  *  Bit simplified and optimized by Jan Hubicka
+  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+  *
+  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+  *  isa_read[wl] and isa_write[wl] fixed
+  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+  */
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define XQUAD_PORTIO_BASE 0xfe400000
+#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
+
+#ifdef __KERNEL__
+
+#include <asm-generic/iomap.h>
+
+#include <linux/vmalloc.h>
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+/**
+ *	virt_to_phys	-	map virtual addresses to physical
+ *	@address: address to remap
+ *
+ *	The returned physical address is the physical (CPU) mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses directly mapped or allocated via kmalloc.
+ *
+ *	This function does not give bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+	return __pa(address);
+}
+
+/**
+ *	phys_to_virt	-	map physical address to virtual
+ *	@address: address to remap
+ *
+ *	The returned virtual address is a current CPU mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses that have a kernel mapping
+ *
+ *	This function does not handle bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+/**
+ * ioremap     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * If the area you are trying to map is a PCI BAR you should have a
+ * look at pci_iomap().
+ */
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
+
+/*
+ * The default ioremap() behavior is non-cached:
+ */
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
+{
+	return ioremap_nocache(offset, size);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+static inline void
+memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+	memset((void __force *)addr, val, count);
+}
+
+static inline void
+memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+	__memcpy(dst, (const void __force *)src, count);
+}
+
+static inline void
+memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+	__memcpy((void __force *)dst, src, count);
+}
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
+
+/*
+ *	Cache management
+ *
+ *	This needed for two cases
+ *	1. Out of order aware processors
+ *	2. Accidentally out of order processors (PPro errata #51)
+ */
+
+#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
+
+static inline void flush_write_buffers(void)
+{
+	asm volatile("lock; addl $0,0(%%esp)": : :"memory");
+}
+
+#else
+
+#define flush_write_buffers() do { } while (0)
+
+#endif
+
+#endif /* __KERNEL__ */
+
+extern void native_io_delay(void);
+
+extern int io_delay_type;
+extern void io_delay_init(void);
+
+#if defined(CONFIG_PARAVIRT)
+#include <asm/paravirt.h>
+#else
+
+static inline void slow_down_io(void)
+{
+	native_io_delay();
+#ifdef REALLY_SLOW_IO
+	native_io_delay();
+	native_io_delay();
+	native_io_delay();
+#endif
+}
+
+#endif
+
+#define __BUILDIO(bwl, bw, type)				\
+static inline void out##bwl(unsigned type value, int port)	\
+{								\
+	out##bwl##_local(value, port);				\
+}								\
+								\
+static inline unsigned type in##bwl(int port)			\
+{								\
+	return in##bwl##_local(port);				\
+}
+
+#define BUILDIO(bwl, bw, type)						\
+static inline void out##bwl##_local(unsigned type value, int port)	\
+{									\
+	asm volatile("out" #bwl " %" #bw "0, %w1"		\
+		     : : "a"(value), "Nd"(port));			\
+}									\
+									\
+static inline unsigned type in##bwl##_local(int port)			\
+{									\
+	unsigned type value;						\
+	asm volatile("in" #bwl " %w1, %" #bw "0"		\
+		     : "=a"(value) : "Nd"(port));			\
+	return value;							\
+}									\
+									\
+static inline void out##bwl##_local_p(unsigned type value, int port)	\
+{									\
+	out##bwl##_local(value, port);					\
+	slow_down_io();							\
+}									\
+									\
+static inline unsigned type in##bwl##_local_p(int port)			\
+{									\
+	unsigned type value = in##bwl##_local(port);			\
+	slow_down_io();							\
+	return value;							\
+}									\
+									\
+__BUILDIO(bwl, bw, type)						\
+									\
+static inline void out##bwl##_p(unsigned type value, int port)		\
+{									\
+	out##bwl(value, port);						\
+	slow_down_io();							\
+}									\
+									\
+static inline unsigned type in##bwl##_p(int port)			\
+{									\
+	unsigned type value = in##bwl(port);				\
+	slow_down_io();							\
+	return value;							\
+}									\
+									\
+static inline void outs##bwl(int port, const void *addr, unsigned long count) \
+{									\
+	asm volatile("rep; outs" #bwl					\
+		     : "+S"(addr), "+c"(count) : "d"(port));		\
+}									\
+									\
+static inline void ins##bwl(int port, void *addr, unsigned long count)	\
+{									\
+	asm volatile("rep; ins" #bwl					\
+		     : "+D"(addr), "+c"(count) : "d"(port));		\
+}
+
+BUILDIO(b, b, char)
+BUILDIO(w, w, short)
+BUILDIO(l, , int)
+
+#endif /* _ASM_X86_IO_32_H */
diff --git a/arch/x86/include/asm/io_64.h b/arch/x86/include/asm/io_64.h
new file mode 100644
index 0000000..fea325a
--- /dev/null
+++ b/arch/x86/include/asm/io_64.h
@@ -0,0 +1,244 @@
+#ifndef _ASM_X86_IO_64_H
+#define _ASM_X86_IO_64_H
+
+
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ */
+
+ /*
+  *  Bit simplified and optimized by Jan Hubicka
+  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+  *
+  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+  *  isa_read[wl] and isa_write[wl] fixed
+  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+  */
+
+extern void native_io_delay(void);
+
+extern int io_delay_type;
+extern void io_delay_init(void);
+
+#if defined(CONFIG_PARAVIRT)
+#include <asm/paravirt.h>
+#else
+
+static inline void slow_down_io(void)
+{
+	native_io_delay();
+#ifdef REALLY_SLOW_IO
+	native_io_delay();
+	native_io_delay();
+	native_io_delay();
+#endif
+}
+#endif
+
+/*
+ * Talk about misusing macros..
+ */
+#define __OUT1(s, x)							\
+static inline void out##s(unsigned x value, unsigned short port) {
+
+#define __OUT2(s, s1, s2)				\
+asm volatile ("out" #s " %" s1 "0,%" s2 "1"
+
+#ifndef REALLY_SLOW_IO
+#define REALLY_SLOW_IO
+#define UNSET_REALLY_SLOW_IO
+#endif
+
+#define __OUT(s, s1, x)							\
+	__OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port));	\
+	}								\
+	__OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \
+	slow_down_io();							\
+}
+
+#define __IN1(s)							\
+static inline RETURN_TYPE in##s(unsigned short port)			\
+{									\
+	RETURN_TYPE _v;
+
+#define __IN2(s, s1, s2)						\
+	asm volatile ("in" #s " %" s2 "1,%" s1 "0"
+
+#define __IN(s, s1, i...)						\
+	__IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i);	\
+	return _v;							\
+	}								\
+	__IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i);	\
+	slow_down_io(); \
+	return _v; }
+
+#ifdef UNSET_REALLY_SLOW_IO
+#undef REALLY_SLOW_IO
+#endif
+
+#define __INS(s)							\
+static inline void ins##s(unsigned short port, void *addr,		\
+			  unsigned long count)				\
+{									\
+	asm volatile ("rep ; ins" #s					\
+		      : "=D" (addr), "=c" (count)			\
+		      : "d" (port), "0" (addr), "1" (count));		\
+}
+
+#define __OUTS(s)							\
+static inline void outs##s(unsigned short port, const void *addr,	\
+			   unsigned long count)				\
+{									\
+	asm volatile ("rep ; outs" #s					\
+		      : "=S" (addr), "=c" (count)			\
+		      : "d" (port), "0" (addr), "1" (count));		\
+}
+
+#define RETURN_TYPE unsigned char
+__IN(b, "")
+#undef RETURN_TYPE
+#define RETURN_TYPE unsigned short
+__IN(w, "")
+#undef RETURN_TYPE
+#define RETURN_TYPE unsigned int
+__IN(l, "")
+#undef RETURN_TYPE
+
+__OUT(b, "b", char)
+__OUT(w, "w", short)
+__OUT(l, , int)
+
+__INS(b)
+__INS(w)
+__INS(l)
+
+__OUTS(b)
+__OUTS(w)
+__OUTS(l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+#if defined(__KERNEL__) && defined(__x86_64__)
+
+#include <linux/vmalloc.h>
+
+#ifndef __i386__
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+	return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+#endif
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+#include <asm-generic/iomap.h>
+
+/*
+ * This one maps high address device memory and turns off caching for that area.
+ * it's useful if some control registers are in such an area and write combining
+ * or read caching is not desirable:
+ */
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
+
+/*
+ * The default ioremap() behavior is non-cached:
+ */
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
+{
+	return ioremap_nocache(offset, size);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+void __memcpy_fromio(void *, unsigned long, unsigned);
+void __memcpy_toio(unsigned long, const void *, unsigned);
+
+static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
+				 unsigned len)
+{
+	__memcpy_fromio(to, (unsigned long)from, len);
+}
+
+static inline void memcpy_toio(volatile void __iomem *to, const void *from,
+			       unsigned len)
+{
+	__memcpy_toio((unsigned long)to, from, len);
+}
+
+void memset_io(volatile void __iomem *a, int b, size_t c);
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
+
+#define flush_write_buffers()
+
+#define BIO_VMERGE_BOUNDARY iommu_bio_merge
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_IO_64_H */
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
new file mode 100644
index 0000000..6afd993
--- /dev/null
+++ b/arch/x86/include/asm/io_apic.h
@@ -0,0 +1,204 @@
+#ifndef _ASM_X86_IO_APIC_H
+#define _ASM_X86_IO_APIC_H
+
+#include <linux/types.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+#include <asm/irq_vectors.h>
+
+/*
+ * Intel IO-APIC support for SMP and UP systems.
+ *
+ * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
+ */
+
+/* I/O Unit Redirection Table */
+#define IO_APIC_REDIR_VECTOR_MASK	0x000FF
+#define IO_APIC_REDIR_DEST_LOGICAL	0x00800
+#define IO_APIC_REDIR_DEST_PHYSICAL	0x00000
+#define IO_APIC_REDIR_SEND_PENDING	(1 << 12)
+#define IO_APIC_REDIR_REMOTE_IRR	(1 << 14)
+#define IO_APIC_REDIR_LEVEL_TRIGGER	(1 << 15)
+#define IO_APIC_REDIR_MASKED		(1 << 16)
+
+/*
+ * The structure of the IO-APIC:
+ */
+union IO_APIC_reg_00 {
+	u32	raw;
+	struct {
+		u32	__reserved_2	: 14,
+			LTS		:  1,
+			delivery_type	:  1,
+			__reserved_1	:  8,
+			ID		:  8;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_01 {
+	u32	raw;
+	struct {
+		u32	version		:  8,
+			__reserved_2	:  7,
+			PRQ		:  1,
+			entries		:  8,
+			__reserved_1	:  8;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_02 {
+	u32	raw;
+	struct {
+		u32	__reserved_2	: 24,
+			arbitration	:  4,
+			__reserved_1	:  4;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_03 {
+	u32	raw;
+	struct {
+		u32	boot_DT		:  1,
+			__reserved_1	: 31;
+	} __attribute__ ((packed)) bits;
+};
+
+enum ioapic_irq_destination_types {
+	dest_Fixed = 0,
+	dest_LowestPrio = 1,
+	dest_SMI = 2,
+	dest__reserved_1 = 3,
+	dest_NMI = 4,
+	dest_INIT = 5,
+	dest__reserved_2 = 6,
+	dest_ExtINT = 7
+};
+
+struct IO_APIC_route_entry {
+	__u32	vector		:  8,
+		delivery_mode	:  3,	/* 000: FIXED
+					 * 001: lowest prio
+					 * 111: ExtINT
+					 */
+		dest_mode	:  1,	/* 0: physical, 1: logical */
+		delivery_status	:  1,
+		polarity	:  1,
+		irr		:  1,
+		trigger		:  1,	/* 0: edge, 1: level */
+		mask		:  1,	/* 0: enabled, 1: disabled */
+		__reserved_2	: 15;
+
+	__u32	__reserved_3	: 24,
+		dest		:  8;
+} __attribute__ ((packed));
+
+struct IR_IO_APIC_route_entry {
+	__u64	vector		: 8,
+		zero		: 3,
+		index2		: 1,
+		delivery_status : 1,
+		polarity	: 1,
+		irr		: 1,
+		trigger		: 1,
+		mask		: 1,
+		reserved	: 31,
+		format		: 1,
+		index		: 15;
+} __attribute__ ((packed));
+
+#ifdef CONFIG_X86_IO_APIC
+
+/*
+ * # of IO-APICs and # of IRQ routing registers
+ */
+extern int nr_ioapics;
+extern int nr_ioapic_registers[MAX_IO_APICS];
+
+/*
+ * MP-BIOS irq configuration table structures:
+ */
+
+#define MP_MAX_IOAPIC_PIN 127
+
+struct mp_config_ioapic {
+	unsigned long mp_apicaddr;
+	unsigned int mp_apicid;
+	unsigned char mp_type;
+	unsigned char mp_apicver;
+	unsigned char mp_flags;
+};
+
+struct mp_config_intsrc {
+	unsigned int mp_dstapic;
+	unsigned char mp_type;
+	unsigned char mp_irqtype;
+	unsigned short mp_irqflag;
+	unsigned char mp_srcbus;
+	unsigned char mp_srcbusirq;
+	unsigned char mp_dstirq;
+};
+
+/* I/O APIC entries */
+extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
+
+/* # of MP IRQ source entries */
+extern int mp_irq_entries;
+
+/* MP IRQ source entries */
+extern struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* non-0 if default (table-less) MP configuration */
+extern int mpc_default_type;
+
+/* Older SiS APIC requires we rewrite the index register */
+extern int sis_apic_bug;
+
+/* 1 if "noapic" boot option passed */
+extern int skip_ioapic_setup;
+
+/* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
+extern int timer_through_8259;
+
+static inline void disable_ioapic_setup(void)
+{
+	skip_ioapic_setup = 1;
+}
+
+/*
+ * If we use the IO-APIC for IRQ routing, disable automatic
+ * assignment of PCI IRQ's.
+ */
+#define io_apic_assign_pci_irqs \
+	(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
+
+#ifdef CONFIG_ACPI
+extern int io_apic_get_unique_id(int ioapic, int apic_id);
+extern int io_apic_get_version(int ioapic);
+extern int io_apic_get_redir_entries(int ioapic);
+extern int io_apic_set_pci_routing(int ioapic, int pin, int irq,
+				   int edge_level, int active_high_low);
+#endif /* CONFIG_ACPI */
+
+extern int (*ioapic_renumber_irq)(int ioapic, int irq);
+extern void ioapic_init_mappings(void);
+
+#ifdef CONFIG_X86_64
+extern int save_mask_IO_APIC_setup(void);
+extern void restore_IO_APIC_setup(void);
+extern void reinit_intr_remapped_IO_APIC(int);
+#endif
+
+extern int probe_nr_irqs(void);
+
+#else  /* !CONFIG_X86_IO_APIC */
+#define io_apic_assign_pci_irqs 0
+static const int timer_through_8259 = 0;
+static inline void ioapic_init_mappings(void) { }
+
+static inline int probe_nr_irqs(void)
+{
+	return NR_IRQS;
+}
+#endif
+
+#endif /* _ASM_X86_IO_APIC_H */
diff --git a/arch/x86/include/asm/ioctl.h b/arch/x86/include/asm/ioctl.h
new file mode 100644
index 0000000..b279fe0
--- /dev/null
+++ b/arch/x86/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/x86/include/asm/ioctls.h b/arch/x86/include/asm/ioctls.h
new file mode 100644
index 0000000..0d5b23b7
--- /dev/null
+++ b/arch/x86/include/asm/ioctls.h
@@ -0,0 +1,94 @@
+#ifndef _ASM_X86_IOCTLS_H
+#define _ASM_X86_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 0x2A, struct termios2)
+#define TCSETS2		_IOW('T', 0x2B, struct termios2)
+#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
+#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
+#define TIOCGRS485	0x542E
+#define TIOCSRS485	0x542F
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
+				/* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
+#define TCSETX		0x5433
+#define TCSETXF		0x5434
+#define TCSETXW		0x5435
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* _ASM_X86_IOCTLS_H */
diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
new file mode 100644
index 0000000..98e28ea
--- /dev/null
+++ b/arch/x86/include/asm/iommu.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_X86_IOMMU_H
+#define _ASM_X86_IOMMU_H
+
+extern void pci_iommu_shutdown(void);
+extern void no_iommu_init(void);
+extern struct dma_mapping_ops nommu_dma_ops;
+extern int force_iommu, no_iommu;
+extern int iommu_detected;
+extern int dmar_disabled;
+extern int forbid_dac;
+
+extern unsigned long iommu_nr_pages(unsigned long addr, unsigned long len);
+
+/* 10 seconds */
+#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000)
+
+#ifdef CONFIG_GART_IOMMU
+extern int gart_iommu_aperture;
+extern int gart_iommu_aperture_allowed;
+extern int gart_iommu_aperture_disabled;
+
+extern void early_gart_iommu_check(void);
+extern void gart_iommu_init(void);
+extern void gart_iommu_shutdown(void);
+extern void __init gart_parse_options(char *);
+extern void gart_iommu_hole_init(void);
+
+#else
+#define gart_iommu_aperture            0
+#define gart_iommu_aperture_allowed    0
+#define gart_iommu_aperture_disabled   1
+
+static inline void early_gart_iommu_check(void)
+{
+}
+static inline void gart_iommu_init(void)
+{
+}
+static inline void gart_iommu_shutdown(void)
+{
+}
+static inline void gart_parse_options(char *options)
+{
+}
+static inline void gart_iommu_hole_init(void)
+{
+}
+#endif
+
+#endif /* _ASM_X86_IOMMU_H */
diff --git a/arch/x86/include/asm/ipcbuf.h b/arch/x86/include/asm/ipcbuf.h
new file mode 100644
index 0000000..ee678fd
--- /dev/null
+++ b/arch/x86/include/asm/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_X86_IPCBUF_H
+#define _ASM_X86_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm {
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* _ASM_X86_IPCBUF_H */
diff --git a/arch/x86/include/asm/ipi.h b/arch/x86/include/asm/ipi.h
new file mode 100644
index 0000000..f89dffb
--- /dev/null
+++ b/arch/x86/include/asm/ipi.h
@@ -0,0 +1,138 @@
+#ifndef _ASM_X86_IPI_H
+#define _ASM_X86_IPI_H
+
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC InterProcessor Interrupt code.
+ *
+ * Moved to include file by James Cleverdon from
+ * arch/x86-64/kernel/smp.c
+ *
+ * Copyrights from kernel/smp.c:
+ *
+ * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
+ * (c) 2002,2003 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License, v.2
+ */
+
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/smp.h>
+
+/*
+ * the following functions deal with sending IPIs between CPUs.
+ *
+ * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
+ */
+
+static inline unsigned int __prepare_ICR(unsigned int shortcut, int vector,
+					 unsigned int dest)
+{
+	unsigned int icr = shortcut | dest;
+
+	switch (vector) {
+	default:
+		icr |= APIC_DM_FIXED | vector;
+		break;
+	case NMI_VECTOR:
+		icr |= APIC_DM_NMI;
+		break;
+	}
+	return icr;
+}
+
+static inline int __prepare_ICR2(unsigned int mask)
+{
+	return SET_APIC_DEST_FIELD(mask);
+}
+
+static inline void __xapic_wait_icr_idle(void)
+{
+	while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
+		cpu_relax();
+}
+
+static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
+				       unsigned int dest)
+{
+	/*
+	 * Subtle. In the case of the 'never do double writes' workaround
+	 * we have to lock out interrupts to be safe.  As we don't care
+	 * of the value read we use an atomic rmw access to avoid costly
+	 * cli/sti.  Otherwise we use an even cheaper single atomic write
+	 * to the APIC.
+	 */
+	unsigned int cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	__xapic_wait_icr_idle();
+
+	/*
+	 * No need to touch the target chip field
+	 */
+	cfg = __prepare_ICR(shortcut, vector, dest);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	native_apic_mem_write(APIC_ICR, cfg);
+}
+
+/*
+ * This is used to send an IPI with no shorthand notation (the destination is
+ * specified in bits 56 to 63 of the ICR).
+ */
+static inline void __send_IPI_dest_field(unsigned int mask, int vector,
+					 unsigned int dest)
+{
+	unsigned long cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	if (unlikely(vector == NMI_VECTOR))
+		safe_apic_wait_icr_idle();
+	else
+		__xapic_wait_icr_idle();
+
+	/*
+	 * prepare target chip field
+	 */
+	cfg = __prepare_ICR2(mask);
+	native_apic_mem_write(APIC_ICR2, cfg);
+
+	/*
+	 * program the ICR
+	 */
+	cfg = __prepare_ICR(0, vector, dest);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	native_apic_mem_write(APIC_ICR, cfg);
+}
+
+static inline void send_IPI_mask_sequence(cpumask_t mask, int vector)
+{
+	unsigned long flags;
+	unsigned long query_cpu;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send
+	 * to an arbitrary mask, so I do a unicast to each CPU instead.
+	 * - mbligh
+	 */
+	local_irq_save(flags);
+	for_each_cpu_mask_nr(query_cpu, mask) {
+		__send_IPI_dest_field(per_cpu(x86_cpu_to_apicid, query_cpu),
+				      vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+#endif /* _ASM_X86_IPI_H */
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
new file mode 100644
index 0000000..bae0eda
--- /dev/null
+++ b/arch/x86/include/asm/irq.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_X86_IRQ_H
+#define _ASM_X86_IRQ_H
+/*
+ *	(C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ *	IRQ/IPI changes taken from work by Thomas Radke
+ *	<tomsoft@informatik.tu-chemnitz.de>
+ */
+
+#include <asm/apicdef.h>
+#include <asm/irq_vectors.h>
+
+static inline int irq_canonicalize(int irq)
+{
+	return ((irq == 2) ? 9 : irq);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+# define ARCH_HAS_NMI_WATCHDOG
+#endif
+
+#ifdef CONFIG_4KSTACKS
+  extern void irq_ctx_init(int cpu);
+  extern void irq_ctx_exit(int cpu);
+# define __ARCH_HAS_DO_SOFTIRQ
+#else
+# define irq_ctx_init(cpu) do { } while (0)
+# define irq_ctx_exit(cpu) do { } while (0)
+# ifdef CONFIG_X86_64
+#  define __ARCH_HAS_DO_SOFTIRQ
+# endif
+#endif
+
+#ifdef CONFIG_IRQBALANCE
+extern int irqbalance_disable(char *str);
+#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+#include <linux/cpumask.h>
+extern void fixup_irqs(cpumask_t map);
+#endif
+
+extern unsigned int do_IRQ(struct pt_regs *regs);
+extern void init_IRQ(void);
+extern void native_init_IRQ(void);
+
+/* Interrupt vector management */
+extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
+
+#endif /* _ASM_X86_IRQ_H */
diff --git a/arch/x86/include/asm/irq_regs.h b/arch/x86/include/asm/irq_regs.h
new file mode 100644
index 0000000..89c898a
--- /dev/null
+++ b/arch/x86/include/asm/irq_regs.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "irq_regs_32.h"
+#else
+# include "irq_regs_64.h"
+#endif
diff --git a/arch/x86/include/asm/irq_regs_32.h b/arch/x86/include/asm/irq_regs_32.h
new file mode 100644
index 0000000..af2f02d
--- /dev/null
+++ b/arch/x86/include/asm/irq_regs_32.h
@@ -0,0 +1,29 @@
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack, stored in the per-cpu area.
+ *
+ * Jeremy Fitzhardinge <jeremy@goop.org>
+ */
+#ifndef _ASM_X86_IRQ_REGS_32_H
+#define _ASM_X86_IRQ_REGS_32_H
+
+#include <asm/percpu.h>
+
+DECLARE_PER_CPU(struct pt_regs *, irq_regs);
+
+static inline struct pt_regs *get_irq_regs(void)
+{
+	return x86_read_percpu(irq_regs);
+}
+
+static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs)
+{
+	struct pt_regs *old_regs;
+
+	old_regs = get_irq_regs();
+	x86_write_percpu(irq_regs, new_regs);
+
+	return old_regs;
+}
+
+#endif /* _ASM_X86_IRQ_REGS_32_H */
diff --git a/arch/x86/include/asm/irq_regs_64.h b/arch/x86/include/asm/irq_regs_64.h
new file mode 100644
index 0000000..3dd9c0b
--- /dev/null
+++ b/arch/x86/include/asm/irq_regs_64.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
new file mode 100644
index 0000000..20e1fd5
--- /dev/null
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_X86_IRQ_REMAPPING_H
+#define _ASM_X86_IRQ_REMAPPING_H
+
+extern int x2apic;
+
+#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8)
+
+#endif	/* _ASM_X86_IRQ_REMAPPING_H */
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
new file mode 100644
index 0000000..d843ed0
--- /dev/null
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -0,0 +1,164 @@
+#ifndef _ASM_X86_IRQ_VECTORS_H
+#define _ASM_X86_IRQ_VECTORS_H
+
+#include <linux/threads.h>
+
+#define NMI_VECTOR		0x02
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR	0x20
+
+#ifdef CONFIG_X86_32
+# define SYSCALL_VECTOR		0x80
+#else
+# define IA32_SYSCALL_VECTOR	0x80
+#endif
+
+/*
+ * Reserve the lowest usable priority level 0x20 - 0x2f for triggering
+ * cleanup after irq migration.
+ */
+#define IRQ_MOVE_CLEANUP_VECTOR	FIRST_EXTERNAL_VECTOR
+
+/*
+ * Vectors 0x30-0x3f are used for ISA interrupts.
+ */
+#define IRQ0_VECTOR		(FIRST_EXTERNAL_VECTOR + 0x10)
+#define IRQ1_VECTOR		(IRQ0_VECTOR + 1)
+#define IRQ2_VECTOR		(IRQ0_VECTOR + 2)
+#define IRQ3_VECTOR		(IRQ0_VECTOR + 3)
+#define IRQ4_VECTOR		(IRQ0_VECTOR + 4)
+#define IRQ5_VECTOR		(IRQ0_VECTOR + 5)
+#define IRQ6_VECTOR		(IRQ0_VECTOR + 6)
+#define IRQ7_VECTOR		(IRQ0_VECTOR + 7)
+#define IRQ8_VECTOR		(IRQ0_VECTOR + 8)
+#define IRQ9_VECTOR		(IRQ0_VECTOR + 9)
+#define IRQ10_VECTOR		(IRQ0_VECTOR + 10)
+#define IRQ11_VECTOR		(IRQ0_VECTOR + 11)
+#define IRQ12_VECTOR		(IRQ0_VECTOR + 12)
+#define IRQ13_VECTOR		(IRQ0_VECTOR + 13)
+#define IRQ14_VECTOR		(IRQ0_VECTOR + 14)
+#define IRQ15_VECTOR		(IRQ0_VECTOR + 15)
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ *  some of the following vectors are 'rare', they are merged
+ *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ *  TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ *  Vectors 0xf0-0xfa are free (reserved for future Linux use).
+ */
+#ifdef CONFIG_X86_32
+
+# define SPURIOUS_APIC_VECTOR		0xff
+# define ERROR_APIC_VECTOR		0xfe
+# define INVALIDATE_TLB_VECTOR		0xfd
+# define RESCHEDULE_VECTOR		0xfc
+# define CALL_FUNCTION_VECTOR		0xfb
+# define CALL_FUNCTION_SINGLE_VECTOR	0xfa
+# define THERMAL_APIC_VECTOR		0xf0
+
+#else
+
+#define SPURIOUS_APIC_VECTOR		0xff
+#define ERROR_APIC_VECTOR		0xfe
+#define RESCHEDULE_VECTOR		0xfd
+#define CALL_FUNCTION_VECTOR		0xfc
+#define CALL_FUNCTION_SINGLE_VECTOR	0xfb
+#define THERMAL_APIC_VECTOR		0xfa
+#define THRESHOLD_APIC_VECTOR		0xf9
+#define UV_BAU_MESSAGE			0xf8
+#define INVALIDATE_TLB_VECTOR_END	0xf7
+#define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
+
+#define NUM_INVALIDATE_TLB_VECTORS	8
+
+#endif
+
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR	0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee) we
+ * start at 0x31(0x41) to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#define FIRST_DEVICE_VECTOR	(IRQ15_VECTOR + 2)
+
+#define NR_VECTORS		256
+
+#define FPU_IRQ			13
+
+#define	FIRST_VM86_IRQ		3
+#define LAST_VM86_IRQ		15
+#define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
+
+#ifdef CONFIG_X86_64
+# if NR_CPUS < MAX_IO_APICS
+#  define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
+# else
+#  define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
+# endif
+
+#elif !defined(CONFIG_X86_VOYAGER)
+
+# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS)
+
+#  define NR_IRQS		224
+
+# else /* IO_APIC || PARAVIRT */
+
+#  define NR_IRQS		16
+
+# endif
+
+#else /* !VISWS && !VOYAGER */
+
+# define NR_IRQS		224
+
+#endif /* VISWS */
+
+/* Voyager specific defines */
+/* These define the CPIs we use in linux */
+#define VIC_CPI_LEVEL0			0
+#define VIC_CPI_LEVEL1			1
+/* now the fake CPIs */
+#define VIC_TIMER_CPI			2
+#define VIC_INVALIDATE_CPI		3
+#define VIC_RESCHEDULE_CPI		4
+#define VIC_ENABLE_IRQ_CPI		5
+#define VIC_CALL_FUNCTION_CPI		6
+#define VIC_CALL_FUNCTION_SINGLE_CPI	7
+
+/* Now the QIC CPIs:  Since we don't need the two initial levels,
+ * these are 2 less than the VIC CPIs */
+#define QIC_CPI_OFFSET			1
+#define QIC_TIMER_CPI			(VIC_TIMER_CPI - QIC_CPI_OFFSET)
+#define QIC_INVALIDATE_CPI		(VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
+#define QIC_RESCHEDULE_CPI		(VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
+#define QIC_ENABLE_IRQ_CPI		(VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_CPI		(VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_SINGLE_CPI	(VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
+
+#define VIC_START_FAKE_CPI		VIC_TIMER_CPI
+#define VIC_END_FAKE_CPI		VIC_CALL_FUNCTION_SINGLE_CPI
+
+/* this is the SYS_INT CPI. */
+#define VIC_SYS_INT			8
+#define VIC_CMN_INT			15
+
+/* This is the boot CPI for alternate processors.  It gets overwritten
+ * by the above once the system has activated all available processors */
+#define VIC_CPU_BOOT_CPI		VIC_CPI_LEVEL0
+#define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
+
+
+#endif /* _ASM_X86_IRQ_VECTORS_H */
diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
new file mode 100644
index 0000000..2bdab21
--- /dev/null
+++ b/arch/x86/include/asm/irqflags.h
@@ -0,0 +1,211 @@
+#ifndef _X86_IRQFLAGS_H_
+#define _X86_IRQFLAGS_H_
+
+#include <asm/processor-flags.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Interrupt control:
+ */
+
+static inline unsigned long native_save_fl(void)
+{
+	unsigned long flags;
+
+	asm volatile("# __raw_save_flags\n\t"
+		     "pushf ; pop %0"
+		     : "=g" (flags)
+		     : /* no input */
+		     : "memory");
+
+	return flags;
+}
+
+static inline void native_restore_fl(unsigned long flags)
+{
+	asm volatile("push %0 ; popf"
+		     : /* no output */
+		     :"g" (flags)
+		     :"memory", "cc");
+}
+
+static inline void native_irq_disable(void)
+{
+	asm volatile("cli": : :"memory");
+}
+
+static inline void native_irq_enable(void)
+{
+	asm volatile("sti": : :"memory");
+}
+
+static inline void native_safe_halt(void)
+{
+	asm volatile("sti; hlt": : :"memory");
+}
+
+static inline void native_halt(void)
+{
+	asm volatile("hlt": : :"memory");
+}
+
+#endif
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	return native_save_fl();
+}
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	native_restore_fl(flags);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	native_irq_disable();
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	native_irq_enable();
+}
+
+/*
+ * Used in the idle loop; sti takes one instruction cycle
+ * to complete:
+ */
+static inline void raw_safe_halt(void)
+{
+	native_safe_halt();
+}
+
+/*
+ * Used when interrupts are already enabled or to
+ * shutdown the processor:
+ */
+static inline void halt(void)
+{
+	native_halt();
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	raw_local_irq_disable();
+
+	return flags;
+}
+#else
+
+#define ENABLE_INTERRUPTS(x)	sti
+#define DISABLE_INTERRUPTS(x)	cli
+
+#ifdef CONFIG_X86_64
+#define SWAPGS	swapgs
+/*
+ * Currently paravirt can't handle swapgs nicely when we
+ * don't have a stack we can rely on (such as a user space
+ * stack).  So we either find a way around these or just fault
+ * and emulate if a guest tries to call swapgs directly.
+ *
+ * Either way, this is a good way to document that we don't
+ * have a reliable stack. x86_64 only.
+ */
+#define SWAPGS_UNSAFE_STACK	swapgs
+
+#define PARAVIRT_ADJUST_EXCEPTION_FRAME	/*  */
+
+#define INTERRUPT_RETURN	iretq
+#define USERGS_SYSRET64				\
+	swapgs;					\
+	sysretq;
+#define USERGS_SYSRET32				\
+	swapgs;					\
+	sysretl
+#define ENABLE_INTERRUPTS_SYSEXIT32		\
+	swapgs;					\
+	sti;					\
+	sysexit
+
+#else
+#define INTERRUPT_RETURN		iret
+#define ENABLE_INTERRUPTS_SYSEXIT	sti; sysexit
+#define GET_CR0_INTO_EAX		movl %cr0, %eax
+#endif
+
+
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_PARAVIRT */
+
+#ifndef __ASSEMBLY__
+#define raw_local_save_flags(flags)				\
+	do { (flags) = __raw_local_save_flags(); } while (0)
+
+#define raw_local_irq_save(flags)				\
+	do { (flags) = __raw_local_irq_save(); } while (0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & X86_EFLAGS_IF);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+#else
+
+#ifdef CONFIG_X86_64
+#define ARCH_LOCKDEP_SYS_EXIT		call lockdep_sys_exit_thunk
+#define ARCH_LOCKDEP_SYS_EXIT_IRQ	\
+	TRACE_IRQS_ON; \
+	sti; \
+	SAVE_REST; \
+	LOCKDEP_SYS_EXIT; \
+	RESTORE_REST; \
+	cli; \
+	TRACE_IRQS_OFF;
+
+#else
+#define ARCH_LOCKDEP_SYS_EXIT			\
+	pushl %eax;				\
+	pushl %ecx;				\
+	pushl %edx;				\
+	call lockdep_sys_exit;			\
+	popl %edx;				\
+	popl %ecx;				\
+	popl %eax;
+
+#define ARCH_LOCKDEP_SYS_EXIT_IRQ
+#endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+#  define TRACE_IRQS_ON		call trace_hardirqs_on_thunk;
+#  define TRACE_IRQS_OFF	call trace_hardirqs_off_thunk;
+#else
+#  define TRACE_IRQS_ON
+#  define TRACE_IRQS_OFF
+#endif
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#  define LOCKDEP_SYS_EXIT	ARCH_LOCKDEP_SYS_EXIT
+#  define LOCKDEP_SYS_EXIT_IRQ	ARCH_LOCKDEP_SYS_EXIT_IRQ
+# else
+#  define LOCKDEP_SYS_EXIT
+#  define LOCKDEP_SYS_EXIT_IRQ
+# endif
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/x86/include/asm/ist.h b/arch/x86/include/asm/ist.h
new file mode 100644
index 0000000..7e5dff1
--- /dev/null
+++ b/arch/x86/include/asm/ist.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_X86_IST_H
+#define _ASM_X86_IST_H
+
+/*
+ * Include file for the interface to IST BIOS
+ * Copyright 2002 Andy Grover <andrew.grover@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+
+#include <linux/types.h>
+
+struct ist_info {
+	__u32 signature;
+	__u32 command;
+	__u32 event;
+	__u32 perf_level;
+};
+
+#ifdef __KERNEL__
+
+extern struct ist_info ist_info;
+
+#endif	/* __KERNEL__ */
+#endif /* _ASM_X86_IST_H */
diff --git a/arch/x86/include/asm/k8.h b/arch/x86/include/asm/k8.h
new file mode 100644
index 0000000..54c8cc5
--- /dev/null
+++ b/arch/x86/include/asm/k8.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_X86_K8_H
+#define _ASM_X86_K8_H
+
+#include <linux/pci.h>
+
+extern struct pci_device_id k8_nb_ids[];
+
+extern int early_is_k8_nb(u32 value);
+extern struct pci_dev **k8_northbridges;
+extern int num_k8_northbridges;
+extern int cache_k8_northbridges(void);
+extern void k8_flush_garts(void);
+extern int k8_scan_nodes(unsigned long start, unsigned long end);
+
+#endif /* _ASM_X86_K8_H */
diff --git a/arch/x86/include/asm/kdebug.h b/arch/x86/include/asm/kdebug.h
new file mode 100644
index 0000000..fa7c0b9
--- /dev/null
+++ b/arch/x86/include/asm/kdebug.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_X86_KDEBUG_H
+#define _ASM_X86_KDEBUG_H
+
+#include <linux/notifier.h>
+
+struct pt_regs;
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_INT3,
+	DIE_DEBUG,
+	DIE_PANIC,
+	DIE_NMI,
+	DIE_DIE,
+	DIE_NMIWATCHDOG,
+	DIE_KERNELDEBUG,
+	DIE_TRAP,
+	DIE_GPF,
+	DIE_CALL,
+	DIE_NMI_IPI,
+	DIE_PAGE_FAULT,
+	DIE_NMIUNKNOWN,
+};
+
+extern void printk_address(unsigned long address, int reliable);
+extern void die(const char *, struct pt_regs *,long);
+extern int __must_check __die(const char *, struct pt_regs *, long);
+extern void show_registers(struct pt_regs *regs);
+extern void show_trace(struct task_struct *t, struct pt_regs *regs,
+		       unsigned long *sp, unsigned long bp);
+extern void __show_regs(struct pt_regs *regs, int all);
+extern void show_regs(struct pt_regs *regs);
+extern unsigned long oops_begin(void);
+extern void oops_end(unsigned long, struct pt_regs *, int signr);
+
+#endif /* _ASM_X86_KDEBUG_H */
diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
new file mode 100644
index 0000000..a1f2277
--- /dev/null
+++ b/arch/x86/include/asm/kexec.h
@@ -0,0 +1,175 @@
+#ifndef _ASM_X86_KEXEC_H
+#define _ASM_X86_KEXEC_H
+
+#ifdef CONFIG_X86_32
+# define PA_CONTROL_PAGE	0
+# define VA_CONTROL_PAGE	1
+# define PA_PGD			2
+# define VA_PGD			3
+# define PA_PTE_0		4
+# define VA_PTE_0		5
+# define PA_PTE_1		6
+# define VA_PTE_1		7
+# define PA_SWAP_PAGE		8
+# ifdef CONFIG_X86_PAE
+#  define PA_PMD_0		9
+#  define VA_PMD_0		10
+#  define PA_PMD_1		11
+#  define VA_PMD_1		12
+#  define PAGES_NR		13
+# else
+#  define PAGES_NR		9
+# endif
+#else
+# define PA_CONTROL_PAGE	0
+# define VA_CONTROL_PAGE	1
+# define PA_PGD			2
+# define VA_PGD			3
+# define PA_PUD_0		4
+# define VA_PUD_0		5
+# define PA_PMD_0		6
+# define VA_PMD_0		7
+# define PA_PTE_0		8
+# define VA_PTE_0		9
+# define PA_PUD_1		10
+# define VA_PUD_1		11
+# define PA_PMD_1		12
+# define VA_PMD_1		13
+# define PA_PTE_1		14
+# define VA_PTE_1		15
+# define PA_TABLE_PAGE		16
+# define PAGES_NR		17
+#endif
+
+#ifdef CONFIG_X86_32
+# define KEXEC_CONTROL_CODE_MAX_SIZE	2048
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/string.h>
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ *
+ * So far x86_64 is limited to 40 physical address bits.
+ */
+#ifdef CONFIG_X86_32
+/* Maximum physical address we can use pages from */
+# define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+# define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+# define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+# define KEXEC_CONTROL_PAGE_SIZE	4096
+
+/* The native architecture */
+# define KEXEC_ARCH KEXEC_ARCH_386
+
+/* We can also handle crash dumps from 64 bit kernel. */
+# define vmcore_elf_check_arch_cross(x) ((x)->e_machine == EM_X86_64)
+#else
+/* Maximum physical address we can use pages from */
+# define KEXEC_SOURCE_MEMORY_LIMIT      (0xFFFFFFFFFFUL)
+/* Maximum address we can reach in physical address mode */
+# define KEXEC_DESTINATION_MEMORY_LIMIT (0xFFFFFFFFFFUL)
+/* Maximum address we can use for the control pages */
+# define KEXEC_CONTROL_MEMORY_LIMIT     (0xFFFFFFFFFFUL)
+
+/* Allocate one page for the pdp and the second for the code */
+# define KEXEC_CONTROL_PAGE_SIZE  (4096UL + 4096UL)
+
+/* The native architecture */
+# define KEXEC_ARCH KEXEC_ARCH_X86_64
+#endif
+
+/*
+ * CPU does not save ss and sp on stack if execution is already
+ * running in kernel mode at the time of NMI occurrence. This code
+ * fixes it.
+ */
+static inline void crash_fixup_ss_esp(struct pt_regs *newregs,
+				      struct pt_regs *oldregs)
+{
+#ifdef CONFIG_X86_32
+	newregs->sp = (unsigned long)&(oldregs->sp);
+	asm volatile("xorl %%eax, %%eax\n\t"
+		     "movw %%ss, %%ax\n\t"
+		     :"=a"(newregs->ss));
+#endif
+}
+
+/*
+ * This function is responsible for capturing register states if coming
+ * via panic otherwise just fix up the ss and sp if coming via kernel
+ * mode exception.
+ */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+				    struct pt_regs *oldregs)
+{
+	if (oldregs) {
+		memcpy(newregs, oldregs, sizeof(*newregs));
+		crash_fixup_ss_esp(newregs, oldregs);
+	} else {
+#ifdef CONFIG_X86_32
+		asm volatile("movl %%ebx,%0" : "=m"(newregs->bx));
+		asm volatile("movl %%ecx,%0" : "=m"(newregs->cx));
+		asm volatile("movl %%edx,%0" : "=m"(newregs->dx));
+		asm volatile("movl %%esi,%0" : "=m"(newregs->si));
+		asm volatile("movl %%edi,%0" : "=m"(newregs->di));
+		asm volatile("movl %%ebp,%0" : "=m"(newregs->bp));
+		asm volatile("movl %%eax,%0" : "=m"(newregs->ax));
+		asm volatile("movl %%esp,%0" : "=m"(newregs->sp));
+		asm volatile("movl %%ss, %%eax;" :"=a"(newregs->ss));
+		asm volatile("movl %%cs, %%eax;" :"=a"(newregs->cs));
+		asm volatile("movl %%ds, %%eax;" :"=a"(newregs->ds));
+		asm volatile("movl %%es, %%eax;" :"=a"(newregs->es));
+		asm volatile("pushfl; popl %0" :"=m"(newregs->flags));
+#else
+		asm volatile("movq %%rbx,%0" : "=m"(newregs->bx));
+		asm volatile("movq %%rcx,%0" : "=m"(newregs->cx));
+		asm volatile("movq %%rdx,%0" : "=m"(newregs->dx));
+		asm volatile("movq %%rsi,%0" : "=m"(newregs->si));
+		asm volatile("movq %%rdi,%0" : "=m"(newregs->di));
+		asm volatile("movq %%rbp,%0" : "=m"(newregs->bp));
+		asm volatile("movq %%rax,%0" : "=m"(newregs->ax));
+		asm volatile("movq %%rsp,%0" : "=m"(newregs->sp));
+		asm volatile("movq %%r8,%0" : "=m"(newregs->r8));
+		asm volatile("movq %%r9,%0" : "=m"(newregs->r9));
+		asm volatile("movq %%r10,%0" : "=m"(newregs->r10));
+		asm volatile("movq %%r11,%0" : "=m"(newregs->r11));
+		asm volatile("movq %%r12,%0" : "=m"(newregs->r12));
+		asm volatile("movq %%r13,%0" : "=m"(newregs->r13));
+		asm volatile("movq %%r14,%0" : "=m"(newregs->r14));
+		asm volatile("movq %%r15,%0" : "=m"(newregs->r15));
+		asm volatile("movl %%ss, %%eax;" :"=a"(newregs->ss));
+		asm volatile("movl %%cs, %%eax;" :"=a"(newregs->cs));
+		asm volatile("pushfq; popq %0" :"=m"(newregs->flags));
+#endif
+		newregs->ip = (unsigned long)current_text_addr();
+	}
+}
+
+#ifdef CONFIG_X86_32
+asmlinkage unsigned long
+relocate_kernel(unsigned long indirection_page,
+		unsigned long control_page,
+		unsigned long start_address,
+		unsigned int has_pae,
+		unsigned int preserve_context);
+#else
+NORET_TYPE void
+relocate_kernel(unsigned long indirection_page,
+		unsigned long page_list,
+		unsigned long start_address) ATTRIB_NORET;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_KEXEC_H */
diff --git a/arch/x86/include/asm/kgdb.h b/arch/x86/include/asm/kgdb.h
new file mode 100644
index 0000000..e6c6c80
--- /dev/null
+++ b/arch/x86/include/asm/kgdb.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_X86_KGDB_H
+#define _ASM_X86_KGDB_H
+
+/*
+ * Copyright (C) 2001-2004 Amit S. Kale
+ * Copyright (C) 2008 Wind River Systems, Inc.
+ */
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound
+ * buffers at least NUMREGBYTES*2 are needed for register packets
+ * Longer buffer is needed to list all threads
+ */
+#define BUFMAX			1024
+
+/*
+ *  Note that this register image is in a different order than
+ *  the register image that Linux produces at interrupt time.
+ *
+ *  Linux's register image is defined by struct pt_regs in ptrace.h.
+ *  Just why GDB uses a different order is a historical mystery.
+ */
+#ifdef CONFIG_X86_32
+enum regnames {
+	GDB_AX,			/* 0 */
+	GDB_CX,			/* 1 */
+	GDB_DX,			/* 2 */
+	GDB_BX,			/* 3 */
+	GDB_SP,			/* 4 */
+	GDB_BP,			/* 5 */
+	GDB_SI,			/* 6 */
+	GDB_DI,			/* 7 */
+	GDB_PC,			/* 8 also known as eip */
+	GDB_PS,			/* 9 also known as eflags */
+	GDB_CS,			/* 10 */
+	GDB_SS,			/* 11 */
+	GDB_DS,			/* 12 */
+	GDB_ES,			/* 13 */
+	GDB_FS,			/* 14 */
+	GDB_GS,			/* 15 */
+};
+#define NUMREGBYTES		((GDB_GS+1)*4)
+#else /* ! CONFIG_X86_32 */
+enum regnames64 {
+	GDB_AX,			/* 0 */
+	GDB_BX,			/* 1 */
+	GDB_CX,			/* 2 */
+	GDB_DX,			/* 3 */
+	GDB_SI,			/* 4 */
+	GDB_DI,			/* 5 */
+	GDB_BP,			/* 6 */
+	GDB_SP,			/* 7 */
+	GDB_R8,			/* 8 */
+	GDB_R9,			/* 9 */
+	GDB_R10,		/* 10 */
+	GDB_R11,		/* 11 */
+	GDB_R12,		/* 12 */
+	GDB_R13,		/* 13 */
+	GDB_R14,		/* 14 */
+	GDB_R15,		/* 15 */
+	GDB_PC,			/* 16 */
+};
+
+enum regnames32 {
+	GDB_PS = 34,
+	GDB_CS,
+	GDB_SS,
+};
+#define NUMREGBYTES		((GDB_SS+1)*4)
+#endif /* CONFIG_X86_32 */
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm("   int $3");
+}
+#define BREAK_INSTR_SIZE	1
+#define CACHE_FLUSH_IS_SAFE	1
+
+#endif /* _ASM_X86_KGDB_H */
diff --git a/arch/x86/include/asm/kmap_types.h b/arch/x86/include/asm/kmap_types.h
new file mode 100644
index 0000000..5759c16
--- /dev/null
+++ b/arch/x86/include/asm/kmap_types.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_X86_KMAP_TYPES_H
+#define _ASM_X86_KMAP_TYPES_H
+
+#if defined(CONFIG_X86_32) && defined(CONFIG_DEBUG_HIGHMEM)
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* _ASM_X86_KMAP_TYPES_H */
diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h
new file mode 100644
index 0000000..4fe681d
--- /dev/null
+++ b/arch/x86/include/asm/kprobes.h
@@ -0,0 +1,88 @@
+#ifndef _ASM_X86_KPROBES_H
+#define _ASM_X86_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * See arch/x86/kernel/kprobes.c for x86 kprobes history.
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define  __ARCH_WANT_KPROBES_INSN_SLOT
+
+struct pt_regs;
+struct kprobe;
+
+typedef u8 kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0xcc
+#define RELATIVEJUMP_INSTRUCTION 0xe9
+#define MAX_INSN_SIZE 16
+#define MAX_STACK_SIZE 64
+#define MIN_STACK_SIZE(ADDR)					       \
+	(((MAX_STACK_SIZE) < (((unsigned long)current_thread_info()) + \
+			      THREAD_SIZE - (unsigned long)(ADDR)))    \
+	 ? (MAX_STACK_SIZE)					       \
+	 : (((unsigned long)current_thread_info()) +		       \
+	    THREAD_SIZE - (unsigned long)(ADDR)))
+
+#define flush_insn_slot(p)	do { } while (0)
+
+extern const int kretprobe_blacklist_size;
+
+void arch_remove_kprobe(struct kprobe *p);
+void kretprobe_trampoline(void);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t *insn;
+	/*
+	 * boostable = -1: This instruction type is not boostable.
+	 * boostable = 0: This instruction type is boostable.
+	 * boostable = 1: This instruction has been boosted: we have
+	 * added a relative jump after the instruction copy in insn,
+	 * so no single-step and fixup are needed (unless there's
+	 * a post_handler or break_handler).
+	 */
+	int boostable;
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long old_flags;
+	unsigned long saved_flags;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_old_flags;
+	unsigned long kprobe_saved_flags;
+	unsigned long *jprobe_saved_sp;
+	struct pt_regs jprobe_saved_regs;
+	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+#endif /* _ASM_X86_KPROBES_H */
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
new file mode 100644
index 0000000..b95162a
--- /dev/null
+++ b/arch/x86/include/asm/kvm.h
@@ -0,0 +1,211 @@
+#ifndef _ASM_X86_KVM_H
+#define _ASM_X86_KVM_H
+
+/*
+ * KVM x86 specific structures and definitions
+ *
+ */
+
+#include <asm/types.h>
+#include <linux/ioctl.h>
+
+/* Architectural interrupt line count. */
+#define KVM_NR_INTERRUPTS 256
+
+struct kvm_memory_alias {
+	__u32 slot;  /* this has a different namespace than memory slots */
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size;
+	__u64 target_phys_addr;
+};
+
+/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
+struct kvm_pic_state {
+	__u8 last_irr;	/* edge detection */
+	__u8 irr;		/* interrupt request register */
+	__u8 imr;		/* interrupt mask register */
+	__u8 isr;		/* interrupt service register */
+	__u8 priority_add;	/* highest irq priority */
+	__u8 irq_base;
+	__u8 read_reg_select;
+	__u8 poll;
+	__u8 special_mask;
+	__u8 init_state;
+	__u8 auto_eoi;
+	__u8 rotate_on_auto_eoi;
+	__u8 special_fully_nested_mode;
+	__u8 init4;		/* true if 4 byte init */
+	__u8 elcr;		/* PIIX edge/trigger selection */
+	__u8 elcr_mask;
+};
+
+#define KVM_IOAPIC_NUM_PINS  24
+struct kvm_ioapic_state {
+	__u64 base_address;
+	__u32 ioregsel;
+	__u32 id;
+	__u32 irr;
+	__u32 pad;
+	union {
+		__u64 bits;
+		struct {
+			__u8 vector;
+			__u8 delivery_mode:3;
+			__u8 dest_mode:1;
+			__u8 delivery_status:1;
+			__u8 polarity:1;
+			__u8 remote_irr:1;
+			__u8 trig_mode:1;
+			__u8 mask:1;
+			__u8 reserve:7;
+			__u8 reserved[4];
+			__u8 dest_id;
+		} fields;
+	} redirtbl[KVM_IOAPIC_NUM_PINS];
+};
+
+#define KVM_IRQCHIP_PIC_MASTER   0
+#define KVM_IRQCHIP_PIC_SLAVE    1
+#define KVM_IRQCHIP_IOAPIC       2
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+	/* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+	__u64 rax, rbx, rcx, rdx;
+	__u64 rsi, rdi, rsp, rbp;
+	__u64 r8,  r9,  r10, r11;
+	__u64 r12, r13, r14, r15;
+	__u64 rip, rflags;
+};
+
+/* for KVM_GET_LAPIC and KVM_SET_LAPIC */
+#define KVM_APIC_REG_SIZE 0x400
+struct kvm_lapic_state {
+	char regs[KVM_APIC_REG_SIZE];
+};
+
+struct kvm_segment {
+	__u64 base;
+	__u32 limit;
+	__u16 selector;
+	__u8  type;
+	__u8  present, dpl, db, s, l, g, avl;
+	__u8  unusable;
+	__u8  padding;
+};
+
+struct kvm_dtable {
+	__u64 base;
+	__u16 limit;
+	__u16 padding[3];
+};
+
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+	/* out (KVM_GET_SREGS) / in (KVM_SET_SREGS) */
+	struct kvm_segment cs, ds, es, fs, gs, ss;
+	struct kvm_segment tr, ldt;
+	struct kvm_dtable gdt, idt;
+	__u64 cr0, cr2, cr3, cr4, cr8;
+	__u64 efer;
+	__u64 apic_base;
+	__u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
+};
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+	__u8  fpr[8][16];
+	__u16 fcw;
+	__u16 fsw;
+	__u8  ftwx;  /* in fxsave format */
+	__u8  pad1;
+	__u16 last_opcode;
+	__u64 last_ip;
+	__u64 last_dp;
+	__u8  xmm[16][16];
+	__u32 mxcsr;
+	__u32 pad2;
+};
+
+struct kvm_msr_entry {
+	__u32 index;
+	__u32 reserved;
+	__u64 data;
+};
+
+/* for KVM_GET_MSRS and KVM_SET_MSRS */
+struct kvm_msrs {
+	__u32 nmsrs; /* number of msrs in entries */
+	__u32 pad;
+
+	struct kvm_msr_entry entries[0];
+};
+
+/* for KVM_GET_MSR_INDEX_LIST */
+struct kvm_msr_list {
+	__u32 nmsrs; /* number of msrs in entries */
+	__u32 indices[0];
+};
+
+
+struct kvm_cpuid_entry {
+	__u32 function;
+	__u32 eax;
+	__u32 ebx;
+	__u32 ecx;
+	__u32 edx;
+	__u32 padding;
+};
+
+/* for KVM_SET_CPUID */
+struct kvm_cpuid {
+	__u32 nent;
+	__u32 padding;
+	struct kvm_cpuid_entry entries[0];
+};
+
+struct kvm_cpuid_entry2 {
+	__u32 function;
+	__u32 index;
+	__u32 flags;
+	__u32 eax;
+	__u32 ebx;
+	__u32 ecx;
+	__u32 edx;
+	__u32 padding[3];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
+#define KVM_CPUID_FLAG_STATEFUL_FUNC    2
+#define KVM_CPUID_FLAG_STATE_READ_NEXT  4
+
+/* for KVM_SET_CPUID2 */
+struct kvm_cpuid2 {
+	__u32 nent;
+	__u32 padding;
+	struct kvm_cpuid_entry2 entries[0];
+};
+
+/* for KVM_GET_PIT and KVM_SET_PIT */
+struct kvm_pit_channel_state {
+	__u32 count; /* can be 65536 */
+	__u16 latched_count;
+	__u8 count_latched;
+	__u8 status_latched;
+	__u8 status;
+	__u8 read_state;
+	__u8 write_state;
+	__u8 write_latch;
+	__u8 rw_mode;
+	__u8 mode;
+	__u8 bcd;
+	__u8 gate;
+	__s64 count_load_time;
+};
+
+struct kvm_pit_state {
+	struct kvm_pit_channel_state channels[3];
+};
+#endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
new file mode 100644
index 0000000..65679d0
--- /dev/null
+++ b/arch/x86/include/asm/kvm_host.h
@@ -0,0 +1,752 @@
+/*
+ * Kernel-based Virtual Machine driver for Linux
+ *
+ * This header defines architecture specific interfaces, x86 version
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef _ASM_X86_KVM_HOST_H
+#define _ASM_X86_KVM_HOST_H
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/mmu_notifier.h>
+
+#include <linux/kvm.h>
+#include <linux/kvm_para.h>
+#include <linux/kvm_types.h>
+
+#include <asm/pvclock-abi.h>
+#include <asm/desc.h>
+
+#define KVM_MAX_VCPUS 16
+#define KVM_MEMORY_SLOTS 32
+/* memory slots that does not exposed to userspace */
+#define KVM_PRIVATE_MEM_SLOTS 4
+
+#define KVM_PIO_PAGE_OFFSET 1
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 2
+
+#define CR3_PAE_RESERVED_BITS ((X86_CR3_PWT | X86_CR3_PCD) - 1)
+#define CR3_NONPAE_RESERVED_BITS ((PAGE_SIZE-1) & ~(X86_CR3_PWT | X86_CR3_PCD))
+#define CR3_L_MODE_RESERVED_BITS (CR3_NONPAE_RESERVED_BITS |	\
+				  0xFFFFFF0000000000ULL)
+
+#define KVM_GUEST_CR0_MASK				   \
+	(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE \
+	 | X86_CR0_NW | X86_CR0_CD)
+#define KVM_VM_CR0_ALWAYS_ON						\
+	(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE | X86_CR0_TS \
+	 | X86_CR0_MP)
+#define KVM_GUEST_CR4_MASK						\
+	(X86_CR4_VME | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_PGE | X86_CR4_VMXE)
+#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
+#define KVM_RMODE_VM_CR4_ALWAYS_ON (X86_CR4_VME | X86_CR4_PAE | X86_CR4_VMXE)
+
+#define INVALID_PAGE (~(hpa_t)0)
+#define UNMAPPED_GVA (~(gpa_t)0)
+
+/* shadow tables are PAE even on non-PAE hosts */
+#define KVM_HPAGE_SHIFT 21
+#define KVM_HPAGE_SIZE (1UL << KVM_HPAGE_SHIFT)
+#define KVM_HPAGE_MASK (~(KVM_HPAGE_SIZE - 1))
+
+#define KVM_PAGES_PER_HPAGE (KVM_HPAGE_SIZE / PAGE_SIZE)
+
+#define DE_VECTOR 0
+#define DB_VECTOR 1
+#define BP_VECTOR 3
+#define OF_VECTOR 4
+#define BR_VECTOR 5
+#define UD_VECTOR 6
+#define NM_VECTOR 7
+#define DF_VECTOR 8
+#define TS_VECTOR 10
+#define NP_VECTOR 11
+#define SS_VECTOR 12
+#define GP_VECTOR 13
+#define PF_VECTOR 14
+#define MF_VECTOR 16
+#define MC_VECTOR 18
+
+#define SELECTOR_TI_MASK (1 << 2)
+#define SELECTOR_RPL_MASK 0x03
+
+#define IOPL_SHIFT 12
+
+#define KVM_ALIAS_SLOTS 4
+
+#define KVM_PERMILLE_MMU_PAGES 20
+#define KVM_MIN_ALLOC_MMU_PAGES 64
+#define KVM_MMU_HASH_SHIFT 10
+#define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT)
+#define KVM_MIN_FREE_MMU_PAGES 5
+#define KVM_REFILL_PAGES 25
+#define KVM_MAX_CPUID_ENTRIES 40
+#define KVM_NR_VAR_MTRR 8
+
+extern spinlock_t kvm_lock;
+extern struct list_head vm_list;
+
+struct kvm_vcpu;
+struct kvm;
+
+enum kvm_reg {
+	VCPU_REGS_RAX = 0,
+	VCPU_REGS_RCX = 1,
+	VCPU_REGS_RDX = 2,
+	VCPU_REGS_RBX = 3,
+	VCPU_REGS_RSP = 4,
+	VCPU_REGS_RBP = 5,
+	VCPU_REGS_RSI = 6,
+	VCPU_REGS_RDI = 7,
+#ifdef CONFIG_X86_64
+	VCPU_REGS_R8 = 8,
+	VCPU_REGS_R9 = 9,
+	VCPU_REGS_R10 = 10,
+	VCPU_REGS_R11 = 11,
+	VCPU_REGS_R12 = 12,
+	VCPU_REGS_R13 = 13,
+	VCPU_REGS_R14 = 14,
+	VCPU_REGS_R15 = 15,
+#endif
+	VCPU_REGS_RIP,
+	NR_VCPU_REGS
+};
+
+enum {
+	VCPU_SREG_ES,
+	VCPU_SREG_CS,
+	VCPU_SREG_SS,
+	VCPU_SREG_DS,
+	VCPU_SREG_FS,
+	VCPU_SREG_GS,
+	VCPU_SREG_TR,
+	VCPU_SREG_LDTR,
+};
+
+#include <asm/kvm_x86_emulate.h>
+
+#define KVM_NR_MEM_OBJS 40
+
+struct kvm_guest_debug {
+	int enabled;
+	unsigned long bp[4];
+	int singlestep;
+};
+
+/*
+ * We don't want allocation failures within the mmu code, so we preallocate
+ * enough memory for a single page fault in a cache.
+ */
+struct kvm_mmu_memory_cache {
+	int nobjs;
+	void *objects[KVM_NR_MEM_OBJS];
+};
+
+#define NR_PTE_CHAIN_ENTRIES 5
+
+struct kvm_pte_chain {
+	u64 *parent_ptes[NR_PTE_CHAIN_ENTRIES];
+	struct hlist_node link;
+};
+
+/*
+ * kvm_mmu_page_role, below, is defined as:
+ *
+ *   bits 0:3 - total guest paging levels (2-4, or zero for real mode)
+ *   bits 4:7 - page table level for this shadow (1-4)
+ *   bits 8:9 - page table quadrant for 2-level guests
+ *   bit   16 - "metaphysical" - gfn is not a real page (huge page/real mode)
+ *   bits 17:19 - common access permissions for all ptes in this shadow page
+ */
+union kvm_mmu_page_role {
+	unsigned word;
+	struct {
+		unsigned glevels:4;
+		unsigned level:4;
+		unsigned quadrant:2;
+		unsigned pad_for_nice_hex_output:6;
+		unsigned metaphysical:1;
+		unsigned access:3;
+		unsigned invalid:1;
+	};
+};
+
+struct kvm_mmu_page {
+	struct list_head link;
+	struct hlist_node hash_link;
+
+	/*
+	 * The following two entries are used to key the shadow page in the
+	 * hash table.
+	 */
+	gfn_t gfn;
+	union kvm_mmu_page_role role;
+
+	u64 *spt;
+	/* hold the gfn of each spte inside spt */
+	gfn_t *gfns;
+	unsigned long slot_bitmap; /* One bit set per slot which has memory
+				    * in this shadow page.
+				    */
+	int multimapped;         /* More than one parent_pte? */
+	int root_count;          /* Currently serving as active root */
+	bool unsync;
+	bool unsync_children;
+	union {
+		u64 *parent_pte;               /* !multimapped */
+		struct hlist_head parent_ptes; /* multimapped, kvm_pte_chain */
+	};
+	DECLARE_BITMAP(unsync_child_bitmap, 512);
+};
+
+struct kvm_pv_mmu_op_buffer {
+	void *ptr;
+	unsigned len;
+	unsigned processed;
+	char buf[512] __aligned(sizeof(long));
+};
+
+/*
+ * x86 supports 3 paging modes (4-level 64-bit, 3-level 64-bit, and 2-level
+ * 32-bit).  The kvm_mmu structure abstracts the details of the current mmu
+ * mode.
+ */
+struct kvm_mmu {
+	void (*new_cr3)(struct kvm_vcpu *vcpu);
+	int (*page_fault)(struct kvm_vcpu *vcpu, gva_t gva, u32 err);
+	void (*free)(struct kvm_vcpu *vcpu);
+	gpa_t (*gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t gva);
+	void (*prefetch_page)(struct kvm_vcpu *vcpu,
+			      struct kvm_mmu_page *page);
+	int (*sync_page)(struct kvm_vcpu *vcpu,
+			 struct kvm_mmu_page *sp);
+	void (*invlpg)(struct kvm_vcpu *vcpu, gva_t gva);
+	hpa_t root_hpa;
+	int root_level;
+	int shadow_root_level;
+
+	u64 *pae_root;
+};
+
+struct kvm_vcpu_arch {
+	u64 host_tsc;
+	int interrupt_window_open;
+	unsigned long irq_summary; /* bit vector: 1 per word in irq_pending */
+	DECLARE_BITMAP(irq_pending, KVM_NR_INTERRUPTS);
+	/*
+	 * rip and regs accesses must go through
+	 * kvm_{register,rip}_{read,write} functions.
+	 */
+	unsigned long regs[NR_VCPU_REGS];
+	u32 regs_avail;
+	u32 regs_dirty;
+
+	unsigned long cr0;
+	unsigned long cr2;
+	unsigned long cr3;
+	unsigned long cr4;
+	unsigned long cr8;
+	u64 pdptrs[4]; /* pae */
+	u64 shadow_efer;
+	u64 apic_base;
+	struct kvm_lapic *apic;    /* kernel irqchip context */
+	int mp_state;
+	int sipi_vector;
+	u64 ia32_misc_enable_msr;
+	bool tpr_access_reporting;
+
+	struct kvm_mmu mmu;
+	/* only needed in kvm_pv_mmu_op() path, but it's hot so
+	 * put it here to avoid allocation */
+	struct kvm_pv_mmu_op_buffer mmu_op_buffer;
+
+	struct kvm_mmu_memory_cache mmu_pte_chain_cache;
+	struct kvm_mmu_memory_cache mmu_rmap_desc_cache;
+	struct kvm_mmu_memory_cache mmu_page_cache;
+	struct kvm_mmu_memory_cache mmu_page_header_cache;
+
+	gfn_t last_pt_write_gfn;
+	int   last_pt_write_count;
+	u64  *last_pte_updated;
+	gfn_t last_pte_gfn;
+
+	struct {
+		gfn_t gfn;	/* presumed gfn during guest pte update */
+		pfn_t pfn;	/* pfn corresponding to that gfn */
+		int largepage;
+		unsigned long mmu_seq;
+	} update_pte;
+
+	struct i387_fxsave_struct host_fx_image;
+	struct i387_fxsave_struct guest_fx_image;
+
+	gva_t mmio_fault_cr2;
+	struct kvm_pio_request pio;
+	void *pio_data;
+
+	struct kvm_queued_exception {
+		bool pending;
+		bool has_error_code;
+		u8 nr;
+		u32 error_code;
+	} exception;
+
+	struct kvm_queued_interrupt {
+		bool pending;
+		u8 nr;
+	} interrupt;
+
+	struct {
+		int active;
+		u8 save_iopl;
+		struct kvm_save_segment {
+			u16 selector;
+			unsigned long base;
+			u32 limit;
+			u32 ar;
+		} tr, es, ds, fs, gs;
+	} rmode;
+	int halt_request; /* real mode on Intel only */
+
+	int cpuid_nent;
+	struct kvm_cpuid_entry2 cpuid_entries[KVM_MAX_CPUID_ENTRIES];
+	/* emulate context */
+
+	struct x86_emulate_ctxt emulate_ctxt;
+
+	gpa_t time;
+	struct pvclock_vcpu_time_info hv_clock;
+	unsigned int hv_clock_tsc_khz;
+	unsigned int time_offset;
+	struct page *time_page;
+
+	bool nmi_pending;
+	bool nmi_injected;
+
+	u64 mtrr[0x100];
+};
+
+struct kvm_mem_alias {
+	gfn_t base_gfn;
+	unsigned long npages;
+	gfn_t target_gfn;
+};
+
+struct kvm_arch{
+	int naliases;
+	struct kvm_mem_alias aliases[KVM_ALIAS_SLOTS];
+
+	unsigned int n_free_mmu_pages;
+	unsigned int n_requested_mmu_pages;
+	unsigned int n_alloc_mmu_pages;
+	struct hlist_head mmu_page_hash[KVM_NUM_MMU_PAGES];
+	/*
+	 * Hash table of struct kvm_mmu_page.
+	 */
+	struct list_head active_mmu_pages;
+	struct list_head assigned_dev_head;
+	struct dmar_domain *intel_iommu_domain;
+	struct kvm_pic *vpic;
+	struct kvm_ioapic *vioapic;
+	struct kvm_pit *vpit;
+	struct hlist_head irq_ack_notifier_list;
+
+	int round_robin_prev_vcpu;
+	unsigned int tss_addr;
+	struct page *apic_access_page;
+
+	gpa_t wall_clock;
+
+	struct page *ept_identity_pagetable;
+	bool ept_identity_pagetable_done;
+};
+
+struct kvm_vm_stat {
+	u32 mmu_shadow_zapped;
+	u32 mmu_pte_write;
+	u32 mmu_pte_updated;
+	u32 mmu_pde_zapped;
+	u32 mmu_flooded;
+	u32 mmu_recycled;
+	u32 mmu_cache_miss;
+	u32 mmu_unsync;
+	u32 remote_tlb_flush;
+	u32 lpages;
+};
+
+struct kvm_vcpu_stat {
+	u32 pf_fixed;
+	u32 pf_guest;
+	u32 tlb_flush;
+	u32 invlpg;
+
+	u32 exits;
+	u32 io_exits;
+	u32 mmio_exits;
+	u32 signal_exits;
+	u32 irq_window_exits;
+	u32 nmi_window_exits;
+	u32 halt_exits;
+	u32 halt_wakeup;
+	u32 request_irq_exits;
+	u32 irq_exits;
+	u32 host_state_reload;
+	u32 efer_reload;
+	u32 fpu_reload;
+	u32 insn_emulation;
+	u32 insn_emulation_fail;
+	u32 hypercalls;
+	u32 irq_injections;
+};
+
+struct descriptor_table {
+	u16 limit;
+	unsigned long base;
+} __attribute__((packed));
+
+struct kvm_x86_ops {
+	int (*cpu_has_kvm_support)(void);          /* __init */
+	int (*disabled_by_bios)(void);             /* __init */
+	void (*hardware_enable)(void *dummy);      /* __init */
+	void (*hardware_disable)(void *dummy);
+	void (*check_processor_compatibility)(void *rtn);
+	int (*hardware_setup)(void);               /* __init */
+	void (*hardware_unsetup)(void);            /* __exit */
+	bool (*cpu_has_accelerated_tpr)(void);
+
+	/* Create, but do not attach this VCPU */
+	struct kvm_vcpu *(*vcpu_create)(struct kvm *kvm, unsigned id);
+	void (*vcpu_free)(struct kvm_vcpu *vcpu);
+	int (*vcpu_reset)(struct kvm_vcpu *vcpu);
+
+	void (*prepare_guest_switch)(struct kvm_vcpu *vcpu);
+	void (*vcpu_load)(struct kvm_vcpu *vcpu, int cpu);
+	void (*vcpu_put)(struct kvm_vcpu *vcpu);
+
+	int (*set_guest_debug)(struct kvm_vcpu *vcpu,
+			       struct kvm_debug_guest *dbg);
+	void (*guest_debug_pre)(struct kvm_vcpu *vcpu);
+	int (*get_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
+	int (*set_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
+	u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg);
+	void (*get_segment)(struct kvm_vcpu *vcpu,
+			    struct kvm_segment *var, int seg);
+	int (*get_cpl)(struct kvm_vcpu *vcpu);
+	void (*set_segment)(struct kvm_vcpu *vcpu,
+			    struct kvm_segment *var, int seg);
+	void (*get_cs_db_l_bits)(struct kvm_vcpu *vcpu, int *db, int *l);
+	void (*decache_cr4_guest_bits)(struct kvm_vcpu *vcpu);
+	void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
+	void (*set_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3);
+	void (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
+	void (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
+	void (*get_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+	void (*set_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+	void (*get_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+	void (*set_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+	unsigned long (*get_dr)(struct kvm_vcpu *vcpu, int dr);
+	void (*set_dr)(struct kvm_vcpu *vcpu, int dr, unsigned long value,
+		       int *exception);
+	void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg);
+	unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
+	void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
+
+	void (*tlb_flush)(struct kvm_vcpu *vcpu);
+
+	void (*run)(struct kvm_vcpu *vcpu, struct kvm_run *run);
+	int (*handle_exit)(struct kvm_run *run, struct kvm_vcpu *vcpu);
+	void (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
+	void (*patch_hypercall)(struct kvm_vcpu *vcpu,
+				unsigned char *hypercall_addr);
+	int (*get_irq)(struct kvm_vcpu *vcpu);
+	void (*set_irq)(struct kvm_vcpu *vcpu, int vec);
+	void (*queue_exception)(struct kvm_vcpu *vcpu, unsigned nr,
+				bool has_error_code, u32 error_code);
+	bool (*exception_injected)(struct kvm_vcpu *vcpu);
+	void (*inject_pending_irq)(struct kvm_vcpu *vcpu);
+	void (*inject_pending_vectors)(struct kvm_vcpu *vcpu,
+				       struct kvm_run *run);
+
+	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
+	int (*get_tdp_level)(void);
+};
+
+extern struct kvm_x86_ops *kvm_x86_ops;
+
+int kvm_mmu_module_init(void);
+void kvm_mmu_module_exit(void);
+
+void kvm_mmu_destroy(struct kvm_vcpu *vcpu);
+int kvm_mmu_create(struct kvm_vcpu *vcpu);
+int kvm_mmu_setup(struct kvm_vcpu *vcpu);
+void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte);
+void kvm_mmu_set_base_ptes(u64 base_pte);
+void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
+		u64 dirty_mask, u64 nx_mask, u64 x_mask);
+
+int kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
+void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot);
+void kvm_mmu_zap_all(struct kvm *kvm);
+unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm);
+void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages);
+
+int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3);
+
+int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa,
+			  const void *val, int bytes);
+int kvm_pv_mmu_op(struct kvm_vcpu *vcpu, unsigned long bytes,
+		  gpa_t addr, unsigned long *ret);
+
+extern bool tdp_enabled;
+
+enum emulation_result {
+	EMULATE_DONE,       /* no further processing */
+	EMULATE_DO_MMIO,      /* kvm_run filled with mmio request */
+	EMULATE_FAIL,         /* can't emulate this instruction */
+};
+
+#define EMULTYPE_NO_DECODE	    (1 << 0)
+#define EMULTYPE_TRAP_UD	    (1 << 1)
+int emulate_instruction(struct kvm_vcpu *vcpu, struct kvm_run *run,
+			unsigned long cr2, u16 error_code, int emulation_type);
+void kvm_report_emulation_failure(struct kvm_vcpu *cvpu, const char *context);
+void realmode_lgdt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
+void realmode_lidt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
+void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
+		   unsigned long *rflags);
+
+unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr);
+void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long value,
+		     unsigned long *rflags);
+void kvm_enable_efer_bits(u64);
+int kvm_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *data);
+int kvm_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
+
+struct x86_emulate_ctxt;
+
+int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
+		     int size, unsigned port);
+int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
+			   int size, unsigned long count, int down,
+			    gva_t address, int rep, unsigned port);
+void kvm_emulate_cpuid(struct kvm_vcpu *vcpu);
+int kvm_emulate_halt(struct kvm_vcpu *vcpu);
+int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address);
+int emulate_clts(struct kvm_vcpu *vcpu);
+int emulator_get_dr(struct x86_emulate_ctxt *ctxt, int dr,
+		    unsigned long *dest);
+int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr,
+		    unsigned long value);
+
+void kvm_get_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg);
+int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
+				int type_bits, int seg);
+
+int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason);
+
+void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
+void kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3);
+void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
+void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8);
+unsigned long kvm_get_cr8(struct kvm_vcpu *vcpu);
+void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw);
+void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l);
+
+int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
+int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data);
+
+void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr);
+void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
+void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
+			   u32 error_code);
+
+void kvm_pic_set_irq(void *opaque, int irq, int level);
+
+void kvm_inject_nmi(struct kvm_vcpu *vcpu);
+
+void fx_init(struct kvm_vcpu *vcpu);
+
+int emulator_read_std(unsigned long addr,
+		      void *val,
+		      unsigned int bytes,
+		      struct kvm_vcpu *vcpu);
+int emulator_write_emulated(unsigned long addr,
+			    const void *val,
+			    unsigned int bytes,
+			    struct kvm_vcpu *vcpu);
+
+unsigned long segment_base(u16 selector);
+
+void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu);
+void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
+		       const u8 *new, int bytes);
+int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva);
+void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu);
+int kvm_mmu_load(struct kvm_vcpu *vcpu);
+void kvm_mmu_unload(struct kvm_vcpu *vcpu);
+void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu);
+
+int kvm_emulate_hypercall(struct kvm_vcpu *vcpu);
+
+int kvm_fix_hypercall(struct kvm_vcpu *vcpu);
+
+int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva, u32 error_code);
+void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva);
+
+void kvm_enable_tdp(void);
+void kvm_disable_tdp(void);
+
+int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3);
+int complete_pio(struct kvm_vcpu *vcpu);
+
+static inline struct kvm_mmu_page *page_header(hpa_t shadow_page)
+{
+	struct page *page = pfn_to_page(shadow_page >> PAGE_SHIFT);
+
+	return (struct kvm_mmu_page *)page_private(page);
+}
+
+static inline u16 kvm_read_fs(void)
+{
+	u16 seg;
+	asm("mov %%fs, %0" : "=g"(seg));
+	return seg;
+}
+
+static inline u16 kvm_read_gs(void)
+{
+	u16 seg;
+	asm("mov %%gs, %0" : "=g"(seg));
+	return seg;
+}
+
+static inline u16 kvm_read_ldt(void)
+{
+	u16 ldt;
+	asm("sldt %0" : "=g"(ldt));
+	return ldt;
+}
+
+static inline void kvm_load_fs(u16 sel)
+{
+	asm("mov %0, %%fs" : : "rm"(sel));
+}
+
+static inline void kvm_load_gs(u16 sel)
+{
+	asm("mov %0, %%gs" : : "rm"(sel));
+}
+
+static inline void kvm_load_ldt(u16 sel)
+{
+	asm("lldt %0" : : "rm"(sel));
+}
+
+static inline void kvm_get_idt(struct descriptor_table *table)
+{
+	asm("sidt %0" : "=m"(*table));
+}
+
+static inline void kvm_get_gdt(struct descriptor_table *table)
+{
+	asm("sgdt %0" : "=m"(*table));
+}
+
+static inline unsigned long kvm_read_tr_base(void)
+{
+	u16 tr;
+	asm("str %0" : "=g"(tr));
+	return segment_base(tr);
+}
+
+#ifdef CONFIG_X86_64
+static inline unsigned long read_msr(unsigned long msr)
+{
+	u64 value;
+
+	rdmsrl(msr, value);
+	return value;
+}
+#endif
+
+static inline void kvm_fx_save(struct i387_fxsave_struct *image)
+{
+	asm("fxsave (%0)":: "r" (image));
+}
+
+static inline void kvm_fx_restore(struct i387_fxsave_struct *image)
+{
+	asm("fxrstor (%0)":: "r" (image));
+}
+
+static inline void kvm_fx_finit(void)
+{
+	asm("finit");
+}
+
+static inline u32 get_rdx_init_val(void)
+{
+	return 0x600; /* P6 family */
+}
+
+static inline void kvm_inject_gp(struct kvm_vcpu *vcpu, u32 error_code)
+{
+	kvm_queue_exception_e(vcpu, GP_VECTOR, error_code);
+}
+
+#define ASM_VMX_VMCLEAR_RAX       ".byte 0x66, 0x0f, 0xc7, 0x30"
+#define ASM_VMX_VMLAUNCH          ".byte 0x0f, 0x01, 0xc2"
+#define ASM_VMX_VMRESUME          ".byte 0x0f, 0x01, 0xc3"
+#define ASM_VMX_VMPTRLD_RAX       ".byte 0x0f, 0xc7, 0x30"
+#define ASM_VMX_VMREAD_RDX_RAX    ".byte 0x0f, 0x78, 0xd0"
+#define ASM_VMX_VMWRITE_RAX_RDX   ".byte 0x0f, 0x79, 0xd0"
+#define ASM_VMX_VMWRITE_RSP_RDX   ".byte 0x0f, 0x79, 0xd4"
+#define ASM_VMX_VMXOFF            ".byte 0x0f, 0x01, 0xc4"
+#define ASM_VMX_VMXON_RAX         ".byte 0xf3, 0x0f, 0xc7, 0x30"
+#define ASM_VMX_INVEPT		  ".byte 0x66, 0x0f, 0x38, 0x80, 0x08"
+#define ASM_VMX_INVVPID		  ".byte 0x66, 0x0f, 0x38, 0x81, 0x08"
+
+#define MSR_IA32_TIME_STAMP_COUNTER		0x010
+
+#define TSS_IOPB_BASE_OFFSET 0x66
+#define TSS_BASE_SIZE 0x68
+#define TSS_IOPB_SIZE (65536 / 8)
+#define TSS_REDIRECTION_SIZE (256 / 8)
+#define RMODE_TSS_SIZE							\
+	(TSS_BASE_SIZE + TSS_REDIRECTION_SIZE + TSS_IOPB_SIZE + 1)
+
+enum {
+	TASK_SWITCH_CALL = 0,
+	TASK_SWITCH_IRET = 1,
+	TASK_SWITCH_JMP = 2,
+	TASK_SWITCH_GATE = 3,
+};
+
+/*
+ * Hardware virtualization extension instructions may fault if a
+ * reboot turns off virtualization while processes are running.
+ * Trap the fault and ignore the instruction if that happens.
+ */
+asmlinkage void kvm_handle_fault_on_reboot(void);
+
+#define __kvm_handle_fault_on_reboot(insn) \
+	"666: " insn "\n\t" \
+	".pushsection .fixup, \"ax\" \n" \
+	"667: \n\t" \
+	__ASM_SIZE(push) " $666b \n\t"	      \
+	"jmp kvm_handle_fault_on_reboot \n\t" \
+	".popsection \n\t" \
+	".pushsection __ex_table, \"a\" \n\t" \
+	_ASM_PTR " 666b, 667b \n\t" \
+	".popsection"
+
+#define KVM_ARCH_WANT_MMU_NOTIFIER
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
+int kvm_age_hva(struct kvm *kvm, unsigned long hva);
+
+#endif /* _ASM_X86_KVM_HOST_H */
diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
new file mode 100644
index 0000000..b8a3305
--- /dev/null
+++ b/arch/x86/include/asm/kvm_para.h
@@ -0,0 +1,147 @@
+#ifndef _ASM_X86_KVM_PARA_H
+#define _ASM_X86_KVM_PARA_H
+
+/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx.  It
+ * should be used to determine that a VM is running under KVM.
+ */
+#define KVM_CPUID_SIGNATURE	0x40000000
+
+/* This CPUID returns a feature bitmap in eax.  Before enabling a particular
+ * paravirtualization, the appropriate feature bit should be checked.
+ */
+#define KVM_CPUID_FEATURES	0x40000001
+#define KVM_FEATURE_CLOCKSOURCE		0
+#define KVM_FEATURE_NOP_IO_DELAY	1
+#define KVM_FEATURE_MMU_OP		2
+
+#define MSR_KVM_WALL_CLOCK  0x11
+#define MSR_KVM_SYSTEM_TIME 0x12
+
+#define KVM_MAX_MMU_OP_BATCH           32
+
+/* Operations for KVM_HC_MMU_OP */
+#define KVM_MMU_OP_WRITE_PTE            1
+#define KVM_MMU_OP_FLUSH_TLB	        2
+#define KVM_MMU_OP_RELEASE_PT	        3
+
+/* Payload for KVM_HC_MMU_OP */
+struct kvm_mmu_op_header {
+	__u32 op;
+	__u32 pad;
+};
+
+struct kvm_mmu_op_write_pte {
+	struct kvm_mmu_op_header header;
+	__u64 pte_phys;
+	__u64 pte_val;
+};
+
+struct kvm_mmu_op_flush_tlb {
+	struct kvm_mmu_op_header header;
+};
+
+struct kvm_mmu_op_release_pt {
+	struct kvm_mmu_op_header header;
+	__u64 pt_phys;
+};
+
+#ifdef __KERNEL__
+#include <asm/processor.h>
+
+extern void kvmclock_init(void);
+
+
+/* This instruction is vmcall.  On non-VT architectures, it will generate a
+ * trap that we will then rewrite to the appropriate instruction.
+ */
+#define KVM_HYPERCALL ".byte 0x0f,0x01,0xc1"
+
+/* For KVM hypercalls, a three-byte sequence of either the vmrun or the vmmrun
+ * instruction.  The hypervisor may replace it with something else but only the
+ * instructions are guaranteed to be supported.
+ *
+ * Up to four arguments may be passed in rbx, rcx, rdx, and rsi respectively.
+ * The hypercall number should be placed in rax and the return value will be
+ * placed in rax.  No other registers will be clobbered unless explicited
+ * noted by the particular hypercall.
+ */
+
+static inline long kvm_hypercall0(unsigned int nr)
+{
+	long ret;
+	asm volatile(KVM_HYPERCALL
+		     : "=a"(ret)
+		     : "a"(nr)
+		     : "memory");
+	return ret;
+}
+
+static inline long kvm_hypercall1(unsigned int nr, unsigned long p1)
+{
+	long ret;
+	asm volatile(KVM_HYPERCALL
+		     : "=a"(ret)
+		     : "a"(nr), "b"(p1)
+		     : "memory");
+	return ret;
+}
+
+static inline long kvm_hypercall2(unsigned int nr, unsigned long p1,
+				  unsigned long p2)
+{
+	long ret;
+	asm volatile(KVM_HYPERCALL
+		     : "=a"(ret)
+		     : "a"(nr), "b"(p1), "c"(p2)
+		     : "memory");
+	return ret;
+}
+
+static inline long kvm_hypercall3(unsigned int nr, unsigned long p1,
+				  unsigned long p2, unsigned long p3)
+{
+	long ret;
+	asm volatile(KVM_HYPERCALL
+		     : "=a"(ret)
+		     : "a"(nr), "b"(p1), "c"(p2), "d"(p3)
+		     : "memory");
+	return ret;
+}
+
+static inline long kvm_hypercall4(unsigned int nr, unsigned long p1,
+				  unsigned long p2, unsigned long p3,
+				  unsigned long p4)
+{
+	long ret;
+	asm volatile(KVM_HYPERCALL
+		     : "=a"(ret)
+		     : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4)
+		     : "memory");
+	return ret;
+}
+
+static inline int kvm_para_available(void)
+{
+	unsigned int eax, ebx, ecx, edx;
+	char signature[13];
+
+	cpuid(KVM_CPUID_SIGNATURE, &eax, &ebx, &ecx, &edx);
+	memcpy(signature + 0, &ebx, 4);
+	memcpy(signature + 4, &ecx, 4);
+	memcpy(signature + 8, &edx, 4);
+	signature[12] = 0;
+
+	if (strcmp(signature, "KVMKVMKVM") == 0)
+		return 1;
+
+	return 0;
+}
+
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return cpuid_eax(KVM_CPUID_FEATURES);
+}
+
+#endif
+
+#endif /* _ASM_X86_KVM_PARA_H */
diff --git a/arch/x86/include/asm/kvm_x86_emulate.h b/arch/x86/include/asm/kvm_x86_emulate.h
new file mode 100644
index 0000000..25179a2
--- /dev/null
+++ b/arch/x86/include/asm/kvm_x86_emulate.h
@@ -0,0 +1,184 @@
+/******************************************************************************
+ * x86_emulate.h
+ *
+ * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
+ *
+ * Copyright (c) 2005 Keir Fraser
+ *
+ * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
+ */
+
+#ifndef _ASM_X86_KVM_X86_EMULATE_H
+#define _ASM_X86_KVM_X86_EMULATE_H
+
+struct x86_emulate_ctxt;
+
+/*
+ * x86_emulate_ops:
+ *
+ * These operations represent the instruction emulator's interface to memory.
+ * There are two categories of operation: those that act on ordinary memory
+ * regions (*_std), and those that act on memory regions known to require
+ * special treatment or emulation (*_emulated).
+ *
+ * The emulator assumes that an instruction accesses only one 'emulated memory'
+ * location, that this location is the given linear faulting address (cr2), and
+ * that this is one of the instruction's data operands. Instruction fetches and
+ * stack operations are assumed never to access emulated memory. The emulator
+ * automatically deduces which operand of a string-move operation is accessing
+ * emulated memory, and assumes that the other operand accesses normal memory.
+ *
+ * NOTES:
+ *  1. The emulator isn't very smart about emulated vs. standard memory.
+ *     'Emulated memory' access addresses should be checked for sanity.
+ *     'Normal memory' accesses may fault, and the caller must arrange to
+ *     detect and handle reentrancy into the emulator via recursive faults.
+ *     Accesses may be unaligned and may cross page boundaries.
+ *  2. If the access fails (cannot emulate, or a standard access faults) then
+ *     it is up to the memop to propagate the fault to the guest VM via
+ *     some out-of-band mechanism, unknown to the emulator. The memop signals
+ *     failure by returning X86EMUL_PROPAGATE_FAULT to the emulator, which will
+ *     then immediately bail.
+ *  3. Valid access sizes are 1, 2, 4 and 8 bytes. On x86/32 systems only
+ *     cmpxchg8b_emulated need support 8-byte accesses.
+ *  4. The emulator cannot handle 64-bit mode emulation on an x86/32 system.
+ */
+/* Access completed successfully: continue emulation as normal. */
+#define X86EMUL_CONTINUE        0
+/* Access is unhandleable: bail from emulation and return error to caller. */
+#define X86EMUL_UNHANDLEABLE    1
+/* Terminate emulation but return success to the caller. */
+#define X86EMUL_PROPAGATE_FAULT 2 /* propagate a generated fault to guest */
+#define X86EMUL_RETRY_INSTR     2 /* retry the instruction for some reason */
+#define X86EMUL_CMPXCHG_FAILED  2 /* cmpxchg did not see expected value */
+struct x86_emulate_ops {
+	/*
+	 * read_std: Read bytes of standard (non-emulated/special) memory.
+	 *           Used for instruction fetch, stack operations, and others.
+	 *  @addr:  [IN ] Linear address from which to read.
+	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
+	 *  @bytes: [IN ] Number of bytes to read from memory.
+	 */
+	int (*read_std)(unsigned long addr, void *val,
+			unsigned int bytes, struct kvm_vcpu *vcpu);
+
+	/*
+	 * read_emulated: Read bytes from emulated/special memory area.
+	 *  @addr:  [IN ] Linear address from which to read.
+	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
+	 *  @bytes: [IN ] Number of bytes to read from memory.
+	 */
+	int (*read_emulated)(unsigned long addr,
+			     void *val,
+			     unsigned int bytes,
+			     struct kvm_vcpu *vcpu);
+
+	/*
+	 * write_emulated: Read bytes from emulated/special memory area.
+	 *  @addr:  [IN ] Linear address to which to write.
+	 *  @val:   [IN ] Value to write to memory (low-order bytes used as
+	 *                required).
+	 *  @bytes: [IN ] Number of bytes to write to memory.
+	 */
+	int (*write_emulated)(unsigned long addr,
+			      const void *val,
+			      unsigned int bytes,
+			      struct kvm_vcpu *vcpu);
+
+	/*
+	 * cmpxchg_emulated: Emulate an atomic (LOCKed) CMPXCHG operation on an
+	 *                   emulated/special memory area.
+	 *  @addr:  [IN ] Linear address to access.
+	 *  @old:   [IN ] Value expected to be current at @addr.
+	 *  @new:   [IN ] Value to write to @addr.
+	 *  @bytes: [IN ] Number of bytes to access using CMPXCHG.
+	 */
+	int (*cmpxchg_emulated)(unsigned long addr,
+				const void *old,
+				const void *new,
+				unsigned int bytes,
+				struct kvm_vcpu *vcpu);
+
+};
+
+/* Type, address-of, and value of an instruction's operand. */
+struct operand {
+	enum { OP_REG, OP_MEM, OP_IMM, OP_NONE } type;
+	unsigned int bytes;
+	unsigned long val, orig_val, *ptr;
+};
+
+struct fetch_cache {
+	u8 data[15];
+	unsigned long start;
+	unsigned long end;
+};
+
+struct decode_cache {
+	u8 twobyte;
+	u8 b;
+	u8 lock_prefix;
+	u8 rep_prefix;
+	u8 op_bytes;
+	u8 ad_bytes;
+	u8 rex_prefix;
+	struct operand src;
+	struct operand dst;
+	bool has_seg_override;
+	u8 seg_override;
+	unsigned int d;
+	unsigned long regs[NR_VCPU_REGS];
+	unsigned long eip;
+	/* modrm */
+	u8 modrm;
+	u8 modrm_mod;
+	u8 modrm_reg;
+	u8 modrm_rm;
+	u8 use_modrm_ea;
+	bool rip_relative;
+	unsigned long modrm_ea;
+	void *modrm_ptr;
+	unsigned long modrm_val;
+	struct fetch_cache fetch;
+};
+
+struct x86_emulate_ctxt {
+	/* Register state before/after emulation. */
+	struct kvm_vcpu *vcpu;
+
+	/* Linear faulting address (if emulating a page-faulting instruction) */
+	unsigned long eflags;
+
+	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
+	int mode;
+
+	u32 cs_base;
+
+	/* decode cache */
+
+	struct decode_cache decode;
+};
+
+/* Repeat String Operation Prefix */
+#define REPE_PREFIX  1
+#define REPNE_PREFIX    2
+
+/* Execution mode, passed to the emulator. */
+#define X86EMUL_MODE_REAL     0	/* Real mode.             */
+#define X86EMUL_MODE_PROT16   2	/* 16-bit protected mode. */
+#define X86EMUL_MODE_PROT32   4	/* 32-bit protected mode. */
+#define X86EMUL_MODE_PROT64   8	/* 64-bit (long) mode.    */
+
+/* Host execution mode. */
+#if defined(__i386__)
+#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT32
+#elif defined(CONFIG_X86_64)
+#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT64
+#endif
+
+int x86_decode_insn(struct x86_emulate_ctxt *ctxt,
+		    struct x86_emulate_ops *ops);
+int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
+		     struct x86_emulate_ops *ops);
+
+#endif /* _ASM_X86_KVM_X86_EMULATE_H */
diff --git a/arch/x86/include/asm/ldt.h b/arch/x86/include/asm/ldt.h
new file mode 100644
index 0000000..46727eb
--- /dev/null
+++ b/arch/x86/include/asm/ldt.h
@@ -0,0 +1,40 @@
+/*
+ * ldt.h
+ *
+ * Definitions of structures used with the modify_ldt system call.
+ */
+#ifndef _ASM_X86_LDT_H
+#define _ASM_X86_LDT_H
+
+/* Maximum number of LDT entries supported. */
+#define LDT_ENTRIES	8192
+/* The size of each LDT entry. */
+#define LDT_ENTRY_SIZE	8
+
+#ifndef __ASSEMBLY__
+/*
+ * Note on 64bit base and limit is ignored and you cannot set DS/ES/CS
+ * not to the default values if you still want to do syscalls. This
+ * call is more for 32bit mode therefore.
+ */
+struct user_desc {
+	unsigned int  entry_number;
+	unsigned int  base_addr;
+	unsigned int  limit;
+	unsigned int  seg_32bit:1;
+	unsigned int  contents:2;
+	unsigned int  read_exec_only:1;
+	unsigned int  limit_in_pages:1;
+	unsigned int  seg_not_present:1;
+	unsigned int  useable:1;
+#ifdef __x86_64__
+	unsigned int  lm:1;
+#endif
+};
+
+#define MODIFY_LDT_CONTENTS_DATA	0
+#define MODIFY_LDT_CONTENTS_STACK	1
+#define MODIFY_LDT_CONTENTS_CODE	2
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_LDT_H */
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
new file mode 100644
index 0000000..d28a507
--- /dev/null
+++ b/arch/x86/include/asm/lguest.h
@@ -0,0 +1,94 @@
+#ifndef _ASM_X86_LGUEST_H
+#define _ASM_X86_LGUEST_H
+
+#define GDT_ENTRY_LGUEST_CS	10
+#define GDT_ENTRY_LGUEST_DS	11
+#define LGUEST_CS		(GDT_ENTRY_LGUEST_CS * 8)
+#define LGUEST_DS		(GDT_ENTRY_LGUEST_DS * 8)
+
+#ifndef __ASSEMBLY__
+#include <asm/desc.h>
+
+#define GUEST_PL 1
+
+/* Every guest maps the core switcher code. */
+#define SHARED_SWITCHER_PAGES \
+	DIV_ROUND_UP(end_switcher_text - start_switcher_text, PAGE_SIZE)
+/* Pages for switcher itself, then two pages per cpu */
+#define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * NR_CPUS)
+
+/* We map at -4M for ease of mapping into the guest (one PTE page). */
+#define SWITCHER_ADDR 0xFFC00000
+
+/* Found in switcher.S */
+extern unsigned long default_idt_entries[];
+
+/* Declarations for definitions in lguest_guest.S */
+extern char lguest_noirq_start[], lguest_noirq_end[];
+extern const char lgstart_cli[], lgend_cli[];
+extern const char lgstart_sti[], lgend_sti[];
+extern const char lgstart_popf[], lgend_popf[];
+extern const char lgstart_pushf[], lgend_pushf[];
+extern const char lgstart_iret[], lgend_iret[];
+
+extern void lguest_iret(void);
+extern void lguest_init(void);
+
+struct lguest_regs {
+	/* Manually saved part. */
+	unsigned long eax, ebx, ecx, edx;
+	unsigned long esi, edi, ebp;
+	unsigned long gs;
+	unsigned long fs, ds, es;
+	unsigned long trapnum, errcode;
+	/* Trap pushed part */
+	unsigned long eip;
+	unsigned long cs;
+	unsigned long eflags;
+	unsigned long esp;
+	unsigned long ss;
+};
+
+/* This is a guest-specific page (mapped ro) into the guest. */
+struct lguest_ro_state {
+	/* Host information we need to restore when we switch back. */
+	u32 host_cr3;
+	struct desc_ptr host_idt_desc;
+	struct desc_ptr host_gdt_desc;
+	u32 host_sp;
+
+	/* Fields which are used when guest is running. */
+	struct desc_ptr guest_idt_desc;
+	struct desc_ptr guest_gdt_desc;
+	struct x86_hw_tss guest_tss;
+	struct desc_struct guest_idt[IDT_ENTRIES];
+	struct desc_struct guest_gdt[GDT_ENTRIES];
+};
+
+struct lg_cpu_arch {
+	/* The GDT entries copied into lguest_ro_state when running. */
+	struct desc_struct gdt[GDT_ENTRIES];
+
+	/* The IDT entries: some copied into lguest_ro_state when running. */
+	struct desc_struct idt[IDT_ENTRIES];
+
+	/* The address of the last guest-visible pagefault (ie. cr2). */
+	unsigned long last_pagefault;
+};
+
+static inline void lguest_set_ts(void)
+{
+	u32 cr0;
+
+	cr0 = read_cr0();
+	if (!(cr0 & 8))
+		write_cr0(cr0 | 8);
+}
+
+/* Full 4G segment descriptors, suitable for CS and DS. */
+#define FULL_EXEC_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9b00} } })
+#define FULL_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9300} } })
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_LGUEST_H */
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
new file mode 100644
index 0000000..4389442
--- /dev/null
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -0,0 +1,71 @@
+/* Architecture specific portion of the lguest hypercalls */
+#ifndef _ASM_X86_LGUEST_HCALL_H
+#define _ASM_X86_LGUEST_HCALL_H
+
+#define LHCALL_FLUSH_ASYNC	0
+#define LHCALL_LGUEST_INIT	1
+#define LHCALL_SHUTDOWN		2
+#define LHCALL_LOAD_GDT		3
+#define LHCALL_NEW_PGTABLE	4
+#define LHCALL_FLUSH_TLB	5
+#define LHCALL_LOAD_IDT_ENTRY	6
+#define LHCALL_SET_STACK	7
+#define LHCALL_TS		8
+#define LHCALL_SET_CLOCKEVENT	9
+#define LHCALL_HALT		10
+#define LHCALL_SET_PTE		14
+#define LHCALL_SET_PMD		15
+#define LHCALL_LOAD_TLS		16
+#define LHCALL_NOTIFY		17
+
+#define LGUEST_TRAP_ENTRY 0x1F
+
+/* Argument number 3 to LHCALL_LGUEST_SHUTDOWN */
+#define LGUEST_SHUTDOWN_POWEROFF	1
+#define LGUEST_SHUTDOWN_RESTART		2
+
+#ifndef __ASSEMBLY__
+#include <asm/hw_irq.h>
+
+/*G:031 But first, how does our Guest contact the Host to ask for privileged
+ * operations?  There are two ways: the direct way is to make a "hypercall",
+ * to make requests of the Host Itself.
+ *
+ * Our hypercall mechanism uses the highest unused trap code (traps 32 and
+ * above are used by real hardware interrupts).  Fifteen hypercalls are
+ * available: the hypercall number is put in the %eax register, and the
+ * arguments (when required) are placed in %edx, %ebx and %ecx.  If a return
+ * value makes sense, it's returned in %eax.
+ *
+ * Grossly invalid calls result in Sudden Death at the hands of the vengeful
+ * Host, rather than returning failure.  This reflects Winston Churchill's
+ * definition of a gentleman: "someone who is only rude intentionally". */
+static inline unsigned long
+hcall(unsigned long call,
+      unsigned long arg1, unsigned long arg2, unsigned long arg3)
+{
+	/* "int" is the Intel instruction to trigger a trap. */
+	asm volatile("int $" __stringify(LGUEST_TRAP_ENTRY)
+		     /* The call in %eax (aka "a") might be overwritten */
+		     : "=a"(call)
+		       /* The arguments are in %eax, %edx, %ebx & %ecx */
+		     : "a"(call), "d"(arg1), "b"(arg2), "c"(arg3)
+		       /* "memory" means this might write somewhere in memory.
+			* This isn't true for all calls, but it's safe to tell
+			* gcc that it might happen so it doesn't get clever. */
+		     : "memory");
+	return call;
+}
+/*:*/
+
+/* Can't use our min() macro here: needs to be a constant */
+#define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
+
+#define LHCALL_RING_SIZE 64
+struct hcall_args {
+	/* These map directly onto eax, ebx, ecx, edx in struct lguest_regs */
+	unsigned long arg0, arg2, arg3, arg1;
+};
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_LGUEST_HCALL_H */
diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
new file mode 100644
index 0000000..f61ee8f
--- /dev/null
+++ b/arch/x86/include/asm/linkage.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_X86_LINKAGE_H
+#define _ASM_X86_LINKAGE_H
+
+#undef notrace
+#define notrace __attribute__((no_instrument_function))
+
+#ifdef CONFIG_X86_64
+#define __ALIGN .p2align 4,,15
+#define __ALIGN_STR ".p2align 4,,15"
+#endif
+
+#ifdef CONFIG_X86_32
+#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
+/*
+ * For 32-bit UML - mark functions implemented in assembly that use
+ * regparm input parameters:
+ */
+#define asmregparm __attribute__((regparm(3)))
+
+/*
+ * Make sure the compiler doesn't do anything stupid with the
+ * arguments on the stack - they are owned by the *caller*, not
+ * the callee. This just fools gcc into not spilling into them,
+ * and keeps it from doing tailcall recursion and/or using the
+ * stack slots for temporaries, since they are live and "used"
+ * all the way to the end of the function.
+ *
+ * NOTE! On x86-64, all the arguments are in registers, so this
+ * only matters on a 32-bit kernel.
+ */
+#define asmlinkage_protect(n, ret, args...) \
+	__asmlinkage_protect##n(ret, ##args)
+#define __asmlinkage_protect_n(ret, args...) \
+	__asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
+#define __asmlinkage_protect0(ret) \
+	__asmlinkage_protect_n(ret)
+#define __asmlinkage_protect1(ret, arg1) \
+	__asmlinkage_protect_n(ret, "g" (arg1))
+#define __asmlinkage_protect2(ret, arg1, arg2) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2))
+#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3))
+#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+			      "g" (arg4))
+#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+			      "g" (arg4), "g" (arg5))
+#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+			      "g" (arg4), "g" (arg5), "g" (arg6))
+
+#endif
+
+#ifdef CONFIG_X86_ALIGNMENT_16
+#define __ALIGN .align 16,0x90
+#define __ALIGN_STR ".align 16,0x90"
+#endif
+
+#endif /* _ASM_X86_LINKAGE_H */
+
diff --git a/arch/x86/include/asm/local.h b/arch/x86/include/asm/local.h
new file mode 100644
index 0000000..47b9b6f
--- /dev/null
+++ b/arch/x86/include/asm/local.h
@@ -0,0 +1,235 @@
+#ifndef _ASM_X86_LOCAL_H
+#define _ASM_X86_LOCAL_H
+
+#include <linux/percpu.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/asm.h>
+
+typedef struct {
+	atomic_long_t a;
+} local_t;
+
+#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+
+#define local_read(l)	atomic_long_read(&(l)->a)
+#define local_set(l, i)	atomic_long_set(&(l)->a, (i))
+
+static inline void local_inc(local_t *l)
+{
+	asm volatile(_ASM_INC "%0"
+		     : "+m" (l->a.counter));
+}
+
+static inline void local_dec(local_t *l)
+{
+	asm volatile(_ASM_DEC "%0"
+		     : "+m" (l->a.counter));
+}
+
+static inline void local_add(long i, local_t *l)
+{
+	asm volatile(_ASM_ADD "%1,%0"
+		     : "+m" (l->a.counter)
+		     : "ir" (i));
+}
+
+static inline void local_sub(long i, local_t *l)
+{
+	asm volatile(_ASM_SUB "%1,%0"
+		     : "+m" (l->a.counter)
+		     : "ir" (i));
+}
+
+/**
+ * local_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @l: pointer to type local_t
+ *
+ * Atomically subtracts @i from @l and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int local_sub_and_test(long i, local_t *l)
+{
+	unsigned char c;
+
+	asm volatile(_ASM_SUB "%2,%0; sete %1"
+		     : "+m" (l->a.counter), "=qm" (c)
+		     : "ir" (i) : "memory");
+	return c;
+}
+
+/**
+ * local_dec_and_test - decrement and test
+ * @l: pointer to type local_t
+ *
+ * Atomically decrements @l by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int local_dec_and_test(local_t *l)
+{
+	unsigned char c;
+
+	asm volatile(_ASM_DEC "%0; sete %1"
+		     : "+m" (l->a.counter), "=qm" (c)
+		     : : "memory");
+	return c != 0;
+}
+
+/**
+ * local_inc_and_test - increment and test
+ * @l: pointer to type local_t
+ *
+ * Atomically increments @l by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int local_inc_and_test(local_t *l)
+{
+	unsigned char c;
+
+	asm volatile(_ASM_INC "%0; sete %1"
+		     : "+m" (l->a.counter), "=qm" (c)
+		     : : "memory");
+	return c != 0;
+}
+
+/**
+ * local_add_negative - add and test if negative
+ * @i: integer value to add
+ * @l: pointer to type local_t
+ *
+ * Atomically adds @i to @l and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int local_add_negative(long i, local_t *l)
+{
+	unsigned char c;
+
+	asm volatile(_ASM_ADD "%2,%0; sets %1"
+		     : "+m" (l->a.counter), "=qm" (c)
+		     : "ir" (i) : "memory");
+	return c;
+}
+
+/**
+ * local_add_return - add and return
+ * @i: integer value to add
+ * @l: pointer to type local_t
+ *
+ * Atomically adds @i to @l and returns @i + @l
+ */
+static inline long local_add_return(long i, local_t *l)
+{
+	long __i;
+#ifdef CONFIG_M386
+	unsigned long flags;
+	if (unlikely(boot_cpu_data.x86 <= 3))
+		goto no_xadd;
+#endif
+	/* Modern 486+ processor */
+	__i = i;
+	asm volatile(_ASM_XADD "%0, %1;"
+		     : "+r" (i), "+m" (l->a.counter)
+		     : : "memory");
+	return i + __i;
+
+#ifdef CONFIG_M386
+no_xadd: /* Legacy 386 processor */
+	local_irq_save(flags);
+	__i = local_read(l);
+	local_set(l, i + __i);
+	local_irq_restore(flags);
+	return i + __i;
+#endif
+}
+
+static inline long local_sub_return(long i, local_t *l)
+{
+	return local_add_return(-i, l);
+}
+
+#define local_inc_return(l)  (local_add_return(1, l))
+#define local_dec_return(l)  (local_sub_return(1, l))
+
+#define local_cmpxchg(l, o, n) \
+	(cmpxchg_local(&((l)->a.counter), (o), (n)))
+/* Always has a lock prefix */
+#define local_xchg(l, n) (xchg(&((l)->a.counter), (n)))
+
+/**
+ * local_add_unless - add unless the number is a given value
+ * @l: pointer of type local_t
+ * @a: the amount to add to l...
+ * @u: ...unless l is equal to u.
+ *
+ * Atomically adds @a to @l, so long as it was not @u.
+ * Returns non-zero if @l was not @u, and zero otherwise.
+ */
+#define local_add_unless(l, a, u)				\
+({								\
+	long c, old;						\
+	c = local_read((l));					\
+	for (;;) {						\
+		if (unlikely(c == (u)))				\
+			break;					\
+		old = local_cmpxchg((l), c, c + (a));		\
+		if (likely(old == c))				\
+			break;					\
+		c = old;					\
+	}							\
+	c != (u);						\
+})
+#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
+
+/* On x86_32, these are no better than the atomic variants.
+ * On x86-64 these are better than the atomic variants on SMP kernels
+ * because they dont use a lock prefix.
+ */
+#define __local_inc(l)		local_inc(l)
+#define __local_dec(l)		local_dec(l)
+#define __local_add(i, l)	local_add((i), (l))
+#define __local_sub(i, l)	local_sub((i), (l))
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ *
+ * X86_64: This could be done better if we moved the per cpu data directly
+ * after GS.
+ */
+
+/* Need to disable preemption for the cpu local counters otherwise we could
+   still access a variable of a previous CPU in a non atomic way. */
+#define cpu_local_wrap_v(l)		\
+({					\
+	local_t res__;			\
+	preempt_disable(); 		\
+	res__ = (l);			\
+	preempt_enable();		\
+	res__;				\
+})
+#define cpu_local_wrap(l)		\
+({					\
+	preempt_disable();		\
+	(l);				\
+	preempt_enable();		\
+})					\
+
+#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var((l))))
+#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var((l)), (i)))
+#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var((l))))
+#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var((l))))
+#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var((l))))
+#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var((l))))
+
+#define __cpu_local_inc(l)	cpu_local_inc((l))
+#define __cpu_local_dec(l)	cpu_local_dec((l))
+#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
+#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
+
+#endif /* _ASM_X86_LOCAL_H */
diff --git a/arch/x86/include/asm/mach-default/apm.h b/arch/x86/include/asm/mach-default/apm.h
new file mode 100644
index 0000000..20370c6
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/apm.h
@@ -0,0 +1,73 @@
+/*
+ *  Machine specific APM BIOS functions for generic.
+ *  Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+#ifndef _ASM_X86_MACH_DEFAULT_APM_H
+#define _ASM_X86_MACH_DEFAULT_APM_H
+
+#ifdef APM_ZERO_SEGS
+#	define APM_DO_ZERO_SEGS \
+		"pushl %%ds\n\t" \
+		"pushl %%es\n\t" \
+		"xorl %%edx, %%edx\n\t" \
+		"mov %%dx, %%ds\n\t" \
+		"mov %%dx, %%es\n\t" \
+		"mov %%dx, %%fs\n\t" \
+		"mov %%dx, %%gs\n\t"
+#	define APM_DO_POP_SEGS \
+		"popl %%es\n\t" \
+		"popl %%ds\n\t"
+#else
+#	define APM_DO_ZERO_SEGS
+#	define APM_DO_POP_SEGS
+#endif
+
+static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
+					u32 *eax, u32 *ebx, u32 *ecx,
+					u32 *edx, u32 *esi)
+{
+	/*
+	 * N.B. We do NOT need a cld after the BIOS call
+	 * because we always save and restore the flags.
+	 */
+	__asm__ __volatile__(APM_DO_ZERO_SEGS
+		"pushl %%edi\n\t"
+		"pushl %%ebp\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
+		"setc %%al\n\t"
+		"popl %%ebp\n\t"
+		"popl %%edi\n\t"
+		APM_DO_POP_SEGS
+		: "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx),
+		  "=S" (*esi)
+		: "a" (func), "b" (ebx_in), "c" (ecx_in)
+		: "memory", "cc");
+}
+
+static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in,
+						u32 ecx_in, u32 *eax)
+{
+	int	cx, dx, si;
+	u8	error;
+
+	/*
+	 * N.B. We do NOT need a cld after the BIOS call
+	 * because we always save and restore the flags.
+	 */
+	__asm__ __volatile__(APM_DO_ZERO_SEGS
+		"pushl %%edi\n\t"
+		"pushl %%ebp\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
+		"setc %%bl\n\t"
+		"popl %%ebp\n\t"
+		"popl %%edi\n\t"
+		APM_DO_POP_SEGS
+		: "=a" (*eax), "=b" (error), "=c" (cx), "=d" (dx),
+		  "=S" (si)
+		: "a" (func), "b" (ebx_in), "c" (ecx_in)
+		: "memory", "cc");
+	return error;
+}
+
+#endif /* _ASM_X86_MACH_DEFAULT_APM_H */
diff --git a/arch/x86/include/asm/mach-default/do_timer.h b/arch/x86/include/asm/mach-default/do_timer.h
new file mode 100644
index 0000000..23ecda0
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/do_timer.h
@@ -0,0 +1,16 @@
+/* defines for inline arch setup functions */
+#include <linux/clockchips.h>
+
+#include <asm/i8259.h>
+#include <asm/i8253.h>
+
+/**
+ * do_timer_interrupt_hook - hook into timer tick
+ *
+ * Call the pit clock event handler. see asm/i8253.h
+ **/
+
+static inline void do_timer_interrupt_hook(void)
+{
+	global_clock_event->event_handler(global_clock_event);
+}
diff --git a/arch/x86/include/asm/mach-default/entry_arch.h b/arch/x86/include/asm/mach-default/entry_arch.h
new file mode 100644
index 0000000..6b1add8
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/entry_arch.h
@@ -0,0 +1,36 @@
+/*
+ * This file is designed to contain the BUILD_INTERRUPT specifications for
+ * all of the extra named interrupt vectors used by the architecture.
+ * Usually this is the Inter Process Interrupts (IPIs)
+ */
+
+/*
+ * The following vectors are part of the Linux architecture, there
+ * is no hardware IRQ pin equivalent for them, they are triggered
+ * through the ICC by us (IPIs)
+ */
+#ifdef CONFIG_X86_SMP
+BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
+BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
+BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
+BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
+BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR)
+#endif
+
+/*
+ * every pentium local APIC has two 'local interrupts', with a
+ * soft-definable vector attached to both interrupts, one of
+ * which is a timer interrupt, the other one is error counter
+ * overflow. Linux uses the local APIC timer interrupt to get
+ * a much simpler SMP time architecture:
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
+BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
+BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
+#endif
+
+#endif
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
new file mode 100644
index 0000000..ff3a6c2
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -0,0 +1,156 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_APIC_H
+#define _ASM_X86_MACH_DEFAULT_MACH_APIC_H
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+#include <mach_apicdef.h>
+#include <asm/smp.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
+
+static inline cpumask_t target_cpus(void)
+{ 
+#ifdef CONFIG_SMP
+	return cpu_online_map;
+#else
+	return cpumask_of_cpu(0);
+#endif
+} 
+
+#define NO_BALANCE_IRQ (0)
+#define esr_disable (0)
+
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
+#define INT_DEST_MODE (genapic->int_dest_mode)
+#define TARGET_CPUS	  (genapic->target_cpus())
+#define apic_id_registered (genapic->apic_id_registered)
+#define init_apic_ldr (genapic->init_apic_ldr)
+#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
+#define phys_pkg_id	(genapic->phys_pkg_id)
+#define vector_allocation_domain    (genapic->vector_allocation_domain)
+#define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))
+#define send_IPI_self (genapic->send_IPI_self)
+extern void setup_apic_routing(void);
+#else
+#define INT_DELIVERY_MODE dest_LowestPrio
+#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+#define TARGET_CPUS (target_cpus())
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+	apic_write(APIC_LDR, val);
+}
+
+static inline int apic_id_registered(void)
+{
+	return physid_isset(read_apic_id(), phys_cpu_present_map);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	return cpus_addr(cpumask)[0];
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+static inline void setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+					"Flat", nr_ioapics);
+#endif
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+	return apicid_2_node[hard_smp_processor_id()];
+#else
+	return 0;
+#endif
+}
+
+static inline cpumask_t vector_allocation_domain(int cpu)
+{
+        /* Careful. Some cpus do not strictly honor the set of cpus
+         * specified in the interrupt destination when using lowest
+         * priority interrupt delivery mode.
+         *
+         * In particular there was a hyperthreading cpu observed to
+         * deliver interrupts to the wrong hyperthread when only one
+         * hyperthread was specified in the interrupt desitination.
+         */
+        cpumask_t domain = { { [0] = APIC_ALL_CPUS, } };
+        return domain;
+}
+#endif
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	return phys_map;
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+	return 1 << cpu;
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < NR_CPUS && cpu_present(mps_cpu))
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+#endif /* CONFIG_X86_LOCAL_APIC */
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_APIC_H */
diff --git a/arch/x86/include/asm/mach-default/mach_apicdef.h b/arch/x86/include/asm/mach-default/mach_apicdef.h
new file mode 100644
index 0000000..5317993
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_apicdef.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H
+#define _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H
+
+#include <asm/apic.h>
+
+#ifdef CONFIG_X86_64
+#define	APIC_ID_MASK		(genapic->apic_id_mask)
+#define GET_APIC_ID(x)		(genapic->get_apic_id(x))
+#define	SET_APIC_ID(x)		(genapic->set_apic_id(x))
+#else
+#define		APIC_ID_MASK		(0xF<<24)
+static inline unsigned get_apic_id(unsigned long x) 
+{
+	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+	if (APIC_XAPIC(ver))
+		return (((x)>>24)&0xFF);
+	else
+		return (((x)>>24)&0xF);
+} 
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+#endif
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H */
diff --git a/arch/x86/include/asm/mach-default/mach_ipi.h b/arch/x86/include/asm/mach-default/mach_ipi.h
new file mode 100644
index 0000000..fabca01
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_ipi.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_IPI_H
+#define _ASM_X86_MACH_DEFAULT_MACH_IPI_H
+
+/* Avoid include hell */
+#define NMI_VECTOR 0x02
+
+void send_IPI_mask_bitmask(cpumask_t mask, int vector);
+void __send_IPI_shortcut(unsigned int shortcut, int vector);
+
+extern int no_broadcast;
+
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define send_IPI_mask (genapic->send_IPI_mask)
+#else
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_bitmask(mask, vector);
+}
+#endif
+
+static inline void __local_send_IPI_allbutself(int vector)
+{
+	if (no_broadcast || vector == NMI_VECTOR) {
+		cpumask_t mask = cpu_online_map;
+
+		cpu_clear(smp_processor_id(), mask);
+		send_IPI_mask(mask, vector);
+	} else
+		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector);
+}
+
+static inline void __local_send_IPI_all(int vector)
+{
+	if (no_broadcast || vector == NMI_VECTOR)
+		send_IPI_mask(cpu_online_map, vector);
+	else
+		__send_IPI_shortcut(APIC_DEST_ALLINC, vector);
+}
+
+#ifdef CONFIG_X86_64
+#define send_IPI_allbutself (genapic->send_IPI_allbutself)
+#define send_IPI_all (genapic->send_IPI_all)
+#else
+static inline void send_IPI_allbutself(int vector)
+{
+	/*
+	 * if there are no other CPUs in the system then we get an APIC send 
+	 * error if we try to broadcast, thus avoid sending IPIs in this case.
+	 */
+	if (!(num_online_cpus() > 1))
+		return;
+
+	__local_send_IPI_allbutself(vector);
+	return;
+}
+
+static inline void send_IPI_all(int vector)
+{
+	__local_send_IPI_all(vector);
+}
+#endif
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_IPI_H */
diff --git a/arch/x86/include/asm/mach-default/mach_mpparse.h b/arch/x86/include/asm/mach-default/mach_mpparse.h
new file mode 100644
index 0000000..8c1ea212
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_mpparse.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H
+#define _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H
+
+static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, 
+		char *productid)
+{
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 0;
+}
+
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H */
diff --git a/arch/x86/include/asm/mach-default/mach_mpspec.h b/arch/x86/include/asm/mach-default/mach_mpspec.h
new file mode 100644
index 0000000..e85ede6
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_mpspec.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H
+#define _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+#if CONFIG_BASE_SMALL == 0
+#define MAX_MP_BUSSES 256
+#else
+#define MAX_MP_BUSSES 32
+#endif
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H */
diff --git a/arch/x86/include/asm/mach-default/mach_timer.h b/arch/x86/include/asm/mach-default/mach_timer.h
new file mode 100644
index 0000000..8537285
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_timer.h
@@ -0,0 +1,48 @@
+/*
+ *  Machine specific calibrate_tsc() for generic.
+ *  Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+/* ------ Calibrate the TSC ------- 
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_TIMER_H
+#define _ASM_X86_MACH_DEFAULT_MACH_TIMER_H
+
+#define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
+#define CALIBRATE_LATCH	\
+	((CLOCK_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
+
+static inline void mach_prepare_counter(void)
+{
+       /* Set the Gate high, disable speaker */
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	/*
+	 * Now let's take care of CTC channel 2
+	 *
+	 * Set the Gate high, program CTC channel 2 for mode 0,
+	 * (interrupt on terminal count mode), binary count,
+	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+	 *
+	 * Some devices need a delay here.
+	 */
+	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
+	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
+	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
+}
+
+static inline void mach_countup(unsigned long *count_p)
+{
+	unsigned long count = 0;
+	do {
+		count++;
+	} while ((inb_p(0x61) & 0x20) == 0);
+	*count_p = count;
+}
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_TIMER_H */
diff --git a/arch/x86/include/asm/mach-default/mach_traps.h b/arch/x86/include/asm/mach-default/mach_traps.h
new file mode 100644
index 0000000..f792060
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_traps.h
@@ -0,0 +1,33 @@
+/*
+ *  Machine specific NMI handling for generic.
+ *  Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H
+#define _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H
+
+#include <asm/mc146818rtc.h>
+
+static inline unsigned char get_nmi_reason(void)
+{
+	return inb(0x61);
+}
+
+static inline void reassert_nmi(void)
+{
+	int old_reg = -1;
+
+	if (do_i_have_lock_cmos())
+		old_reg = current_lock_cmos_reg();
+	else
+		lock_cmos(0); /* register doesn't matter here */
+	outb(0x8f, 0x70);
+	inb(0x71);		/* dummy */
+	outb(0x0f, 0x70);
+	inb(0x71);		/* dummy */
+	if (old_reg >= 0)
+		outb(old_reg, 0x70);
+	else
+		unlock_cmos();
+}
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H */
diff --git a/arch/x86/include/asm/mach-default/mach_wakecpu.h b/arch/x86/include/asm/mach-default/mach_wakecpu.h
new file mode 100644
index 0000000..d5c0b82
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_wakecpu.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
+#define _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
+
+/* 
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#define WAKE_SECONDARY_VIA_INIT
+
+#define TRAMPOLINE_LOW phys_to_virt(0x467)
+#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+	while (!atomic_read(deassert))
+		cpu_relax();
+	return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H */
diff --git a/arch/x86/include/asm/mach-default/pci-functions.h b/arch/x86/include/asm/mach-default/pci-functions.h
new file mode 100644
index 0000000..ed0bab4
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/pci-functions.h
@@ -0,0 +1,19 @@
+/*
+ *	PCI BIOS function numbering for conventional PCI BIOS 
+ *	systems
+ */
+
+#define PCIBIOS_PCI_FUNCTION_ID 	0xb1XX
+#define PCIBIOS_PCI_BIOS_PRESENT 	0xb101
+#define PCIBIOS_FIND_PCI_DEVICE		0xb102
+#define PCIBIOS_FIND_PCI_CLASS_CODE	0xb103
+#define PCIBIOS_GENERATE_SPECIAL_CYCLE	0xb106
+#define PCIBIOS_READ_CONFIG_BYTE	0xb108
+#define PCIBIOS_READ_CONFIG_WORD	0xb109
+#define PCIBIOS_READ_CONFIG_DWORD	0xb10a
+#define PCIBIOS_WRITE_CONFIG_BYTE	0xb10b
+#define PCIBIOS_WRITE_CONFIG_WORD	0xb10c
+#define PCIBIOS_WRITE_CONFIG_DWORD	0xb10d
+#define PCIBIOS_GET_ROUTING_OPTIONS	0xb10e
+#define PCIBIOS_SET_PCI_HW_INT		0xb10f
+
diff --git a/arch/x86/include/asm/mach-default/setup_arch.h b/arch/x86/include/asm/mach-default/setup_arch.h
new file mode 100644
index 0000000..3884620
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/setup_arch.h
@@ -0,0 +1,3 @@
+/* Hook to call BIOS initialisation function */
+
+/* no action for generic */
diff --git a/arch/x86/include/asm/mach-default/smpboot_hooks.h b/arch/x86/include/asm/mach-default/smpboot_hooks.h
new file mode 100644
index 0000000..dbab36d
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/smpboot_hooks.h
@@ -0,0 +1,59 @@
+/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
+ * which needs to alter them. */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	io_apic_irqs = 0;
+#endif
+}
+
+static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
+{
+	CMOS_WRITE(0xa, 0xf);
+	local_flush_tlb();
+	pr_debug("1.\n");
+	*((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
+	pr_debug("2.\n");
+	*((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
+	pr_debug("3.\n");
+}
+
+static inline void smpboot_restore_warm_reset_vector(void)
+{
+	/*
+	 * Install writable page 0 entry to set BIOS data area.
+	 */
+	local_flush_tlb();
+
+	/*
+	 * Paranoid:  Set warm reset code and vector here back
+	 * to default values.
+	 */
+	CMOS_WRITE(0, 0xf);
+
+	*((volatile long *) phys_to_virt(0x467)) = 0;
+}
+
+static inline void __init smpboot_setup_io_apic(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	/*
+	 * Here we can be sure that there is an IO-APIC in the system. Let's
+	 * go and set it up:
+	 */
+	if (!skip_ioapic_setup && nr_ioapics)
+		setup_IO_APIC();
+	else {
+		nr_ioapics = 0;
+		localise_nmi_watchdog();
+	}
+#endif
+}
+
+static inline void smpboot_clear_io_apic(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	nr_ioapics = 0;
+#endif
+}
diff --git a/arch/x86/include/asm/mach-generic/gpio.h b/arch/x86/include/asm/mach-generic/gpio.h
new file mode 100644
index 0000000..995c45e
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/gpio.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_X86_MACH_GENERIC_GPIO_H
+#define _ASM_X86_MACH_GENERIC_GPIO_H
+
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+
+#include <asm-generic/gpio.h>           /* cansleep wrappers */
+
+#endif /* _ASM_X86_MACH_GENERIC_GPIO_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
new file mode 100644
index 0000000..5180bd7
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_APIC_H
+#define _ASM_X86_MACH_GENERIC_MACH_APIC_H
+
+#include <asm/genapic.h>
+
+#define esr_disable (genapic->ESR_DISABLE)
+#define NO_BALANCE_IRQ (genapic->no_balance_irq)
+#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
+#define INT_DEST_MODE (genapic->int_dest_mode)
+#undef APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL (genapic->apic_destination_logical)
+#define TARGET_CPUS	  (genapic->target_cpus())
+#define apic_id_registered (genapic->apic_id_registered)
+#define init_apic_ldr (genapic->init_apic_ldr)
+#define ioapic_phys_id_map (genapic->ioapic_phys_id_map)
+#define setup_apic_routing (genapic->setup_apic_routing)
+#define multi_timer_check (genapic->multi_timer_check)
+#define apicid_to_node (genapic->apicid_to_node)
+#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid) 
+#define cpu_present_to_apicid (genapic->cpu_present_to_apicid)
+#define apicid_to_cpu_present (genapic->apicid_to_cpu_present)
+#define setup_portio_remap (genapic->setup_portio_remap)
+#define check_apicid_present (genapic->check_apicid_present)
+#define check_phys_apicid_present (genapic->check_phys_apicid_present)
+#define check_apicid_used (genapic->check_apicid_used)
+#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
+#define vector_allocation_domain (genapic->vector_allocation_domain)
+#define enable_apic_mode (genapic->enable_apic_mode)
+#define phys_pkg_id (genapic->phys_pkg_id)
+
+extern void generic_bigsmp_probe(void);
+
+#endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_apicdef.h b/arch/x86/include/asm/mach-generic/mach_apicdef.h
new file mode 100644
index 0000000..68041f3
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/mach_apicdef.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_APICDEF_H
+#define _ASM_X86_MACH_GENERIC_MACH_APICDEF_H
+
+#ifndef APIC_DEFINITION
+#include <asm/genapic.h>
+
+#define GET_APIC_ID (genapic->get_apic_id)
+#define APIC_ID_MASK (genapic->apic_id_mask)
+#endif
+
+#endif /* _ASM_X86_MACH_GENERIC_MACH_APICDEF_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_ipi.h b/arch/x86/include/asm/mach-generic/mach_ipi.h
new file mode 100644
index 0000000..ffd637e
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/mach_ipi.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_IPI_H
+#define _ASM_X86_MACH_GENERIC_MACH_IPI_H
+
+#include <asm/genapic.h>
+
+#define send_IPI_mask (genapic->send_IPI_mask)
+#define send_IPI_allbutself (genapic->send_IPI_allbutself)
+#define send_IPI_all (genapic->send_IPI_all)
+
+#endif /* _ASM_X86_MACH_GENERIC_MACH_IPI_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_mpparse.h b/arch/x86/include/asm/mach-generic/mach_mpparse.h
new file mode 100644
index 0000000..048f1d4
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/mach_mpparse.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H
+#define _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H
+
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+			 char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+
+#endif /* _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_mpspec.h b/arch/x86/include/asm/mach-generic/mach_mpspec.h
new file mode 100644
index 0000000..bbab5cc
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/mach_mpspec.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H
+#define _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+/* Summit or generic (i.e. installer) kernels need lots of bus entries. */
+/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
+#define MAX_MP_BUSSES 260
+
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
+#endif /* _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H */
diff --git a/arch/x86/include/asm/mach-rdc321x/gpio.h b/arch/x86/include/asm/mach-rdc321x/gpio.h
new file mode 100644
index 0000000..c210ab5
--- /dev/null
+++ b/arch/x86/include/asm/mach-rdc321x/gpio.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_X86_MACH_RDC321X_GPIO_H
+#define _ASM_X86_MACH_RDC321X_GPIO_H
+
+#include <linux/kernel.h>
+
+extern int rdc_gpio_get_value(unsigned gpio);
+extern void rdc_gpio_set_value(unsigned gpio, int value);
+extern int rdc_gpio_direction_input(unsigned gpio);
+extern int rdc_gpio_direction_output(unsigned gpio, int value);
+extern int rdc_gpio_request(unsigned gpio, const char *label);
+extern void rdc_gpio_free(unsigned gpio);
+extern void __init rdc321x_gpio_setup(void);
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return rdc_gpio_request(gpio, label);
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	might_sleep();
+	rdc_gpio_free(gpio);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return rdc_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return rdc_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return rdc_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	rdc_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _ASM_X86_MACH_RDC321X_GPIO_H */
diff --git a/arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h b/arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h
new file mode 100644
index 0000000..c8e9c8b
--- /dev/null
+++ b/arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h
@@ -0,0 +1,12 @@
+#define PFX	"rdc321x: "
+
+/* General purpose configuration and data registers */
+#define RDC3210_CFGREG_ADDR     0x0CF8
+#define RDC3210_CFGREG_DATA     0x0CFC
+
+#define RDC321X_GPIO_CTRL_REG1	0x48
+#define RDC321X_GPIO_CTRL_REG2	0x84
+#define RDC321X_GPIO_DATA_REG1	0x4c
+#define RDC321X_GPIO_DATA_REG2	0x88
+
+#define RDC321X_MAX_GPIO	58
diff --git a/arch/x86/include/asm/mach-voyager/do_timer.h b/arch/x86/include/asm/mach-voyager/do_timer.h
new file mode 100644
index 0000000..9e5a459
--- /dev/null
+++ b/arch/x86/include/asm/mach-voyager/do_timer.h
@@ -0,0 +1,17 @@
+/* defines for inline arch setup functions */
+#include <linux/clockchips.h>
+
+#include <asm/voyager.h>
+#include <asm/i8253.h>
+
+/**
+ * do_timer_interrupt_hook - hook into timer tick
+ *
+ * Call the pit clock event handler. see asm/i8253.h
+ **/
+static inline void do_timer_interrupt_hook(void)
+{
+	global_clock_event->event_handler(global_clock_event);
+	voyager_timer_interrupt();
+}
+
diff --git a/arch/x86/include/asm/mach-voyager/entry_arch.h b/arch/x86/include/asm/mach-voyager/entry_arch.h
new file mode 100644
index 0000000..ae52624
--- /dev/null
+++ b/arch/x86/include/asm/mach-voyager/entry_arch.h
@@ -0,0 +1,26 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Copyright (C) 2002
+ *
+ * Author: James.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/voyager/entry_arch.h
+ *
+ * This file builds the VIC and QIC CPI gates
+ */
+
+/* initialise the voyager interrupt gates 
+ *
+ * This uses the macros in irq.h to set up assembly jump gates.  The
+ * calls are then redirected to the same routine with smp_ prefixed */
+BUILD_INTERRUPT(vic_sys_interrupt, VIC_SYS_INT)
+BUILD_INTERRUPT(vic_cmn_interrupt, VIC_CMN_INT)
+BUILD_INTERRUPT(vic_cpi_interrupt, VIC_CPI_LEVEL0);
+
+/* do all the QIC interrupts */
+BUILD_INTERRUPT(qic_timer_interrupt, QIC_TIMER_CPI);
+BUILD_INTERRUPT(qic_invalidate_interrupt, QIC_INVALIDATE_CPI);
+BUILD_INTERRUPT(qic_reschedule_interrupt, QIC_RESCHEDULE_CPI);
+BUILD_INTERRUPT(qic_enable_irq_interrupt, QIC_ENABLE_IRQ_CPI);
+BUILD_INTERRUPT(qic_call_function_interrupt, QIC_CALL_FUNCTION_CPI);
+BUILD_INTERRUPT(qic_call_function_single_interrupt, QIC_CALL_FUNCTION_SINGLE_CPI);
diff --git a/arch/x86/include/asm/mach-voyager/setup_arch.h b/arch/x86/include/asm/mach-voyager/setup_arch.h
new file mode 100644
index 0000000..71729ca
--- /dev/null
+++ b/arch/x86/include/asm/mach-voyager/setup_arch.h
@@ -0,0 +1,12 @@
+#include <asm/voyager.h>
+#include <asm/setup.h>
+#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *) \
+			(&boot_params.apm_bios_info))
+
+/* Hook to call BIOS initialisation function */
+
+/* for voyager, pass the voyager BIOS/SUS info area to the detection
+ * routines */
+
+#define ARCH_SETUP	voyager_detect(VOYAGER_BIOS_INFO);
+
diff --git a/arch/x86/include/asm/math_emu.h b/arch/x86/include/asm/math_emu.h
new file mode 100644
index 0000000..5a65b10
--- /dev/null
+++ b/arch/x86/include/asm/math_emu.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_X86_MATH_EMU_H
+#define _ASM_X86_MATH_EMU_H
+
+/* This structure matches the layout of the data saved to the stack
+   following a device-not-present interrupt, part of it saved
+   automatically by the 80386/80486.
+   */
+struct info {
+	long ___orig_eip;
+	long ___ebx;
+	long ___ecx;
+	long ___edx;
+	long ___esi;
+	long ___edi;
+	long ___ebp;
+	long ___eax;
+	long ___ds;
+	long ___es;
+	long ___fs;
+	long ___orig_eax;
+	long ___eip;
+	long ___cs;
+	long ___eflags;
+	long ___esp;
+	long ___ss;
+	long ___vm86_es; /* This and the following only in vm86 mode */
+	long ___vm86_ds;
+	long ___vm86_fs;
+	long ___vm86_gs;
+};
+#endif /* _ASM_X86_MATH_EMU_H */
diff --git a/arch/x86/include/asm/mc146818rtc.h b/arch/x86/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..01fdf56
--- /dev/null
+++ b/arch/x86/include/asm/mc146818rtc.h
@@ -0,0 +1,104 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_X86_MC146818RTC_H
+#define _ASM_X86_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <linux/mc146818rtc.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+#if defined(CONFIG_X86_32) && defined(__HAVE_ARCH_CMPXCHG)
+/*
+ * This lock provides nmi access to the CMOS/RTC registers.  It has some
+ * special properties.  It is owned by a CPU and stores the index register
+ * currently being accessed (if owned).  The idea here is that it works
+ * like a normal lock (normally).  However, in an NMI, the NMI code will
+ * first check to see if its CPU owns the lock, meaning that the NMI
+ * interrupted during the read/write of the device.  If it does, it goes ahead
+ * and performs the access and then restores the index register.  If it does
+ * not, it locks normally.
+ *
+ * Note that since we are working with NMIs, we need this lock even in
+ * a non-SMP machine just to mark that the lock is owned.
+ *
+ * This only works with compare-and-swap.  There is no other way to
+ * atomically claim the lock and set the owner.
+ */
+#include <linux/smp.h>
+extern volatile unsigned long cmos_lock;
+
+/*
+ * All of these below must be called with interrupts off, preempt
+ * disabled, etc.
+ */
+
+static inline void lock_cmos(unsigned char reg)
+{
+	unsigned long new;
+	new = ((smp_processor_id() + 1) << 8) | reg;
+	for (;;) {
+		if (cmos_lock) {
+			cpu_relax();
+			continue;
+		}
+		if (__cmpxchg(&cmos_lock, 0, new, sizeof(cmos_lock)) == 0)
+			return;
+	}
+}
+
+static inline void unlock_cmos(void)
+{
+	cmos_lock = 0;
+}
+
+static inline int do_i_have_lock_cmos(void)
+{
+	return (cmos_lock >> 8) == (smp_processor_id() + 1);
+}
+
+static inline unsigned char current_lock_cmos_reg(void)
+{
+	return cmos_lock & 0xff;
+}
+
+#define lock_cmos_prefix(reg)			\
+	do {					\
+		unsigned long cmos_flags;	\
+		local_irq_save(cmos_flags);	\
+		lock_cmos(reg)
+
+#define lock_cmos_suffix(reg)			\
+	unlock_cmos();				\
+	local_irq_restore(cmos_flags);		\
+	} while (0)
+#else
+#define lock_cmos_prefix(reg) do {} while (0)
+#define lock_cmos_suffix(reg) do {} while (0)
+#define lock_cmos(reg)
+#define unlock_cmos()
+#define do_i_have_lock_cmos() 0
+#define current_lock_cmos_reg() 0
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) rtc_cmos_read(addr)
+#define CMOS_WRITE(val, addr) rtc_cmos_write(val, addr)
+unsigned char rtc_cmos_read(unsigned char addr);
+void rtc_cmos_write(unsigned char val, unsigned char addr);
+
+extern int mach_set_rtc_mmss(unsigned long nowtime);
+extern unsigned long mach_get_cmos_time(void);
+
+#define RTC_IRQ 8
+
+#endif /* _ASM_X86_MC146818RTC_H */
diff --git a/arch/x86/include/asm/mca.h b/arch/x86/include/asm/mca.h
new file mode 100644
index 0000000..eedbb6c
--- /dev/null
+++ b/arch/x86/include/asm/mca.h
@@ -0,0 +1,43 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Platform specific MCA defines */
+#ifndef _ASM_X86_MCA_H
+#define _ASM_X86_MCA_H
+
+/* Maximal number of MCA slots - actually, some machines have less, but
+ * they all have sufficient number of POS registers to cover 8.
+ */
+#define MCA_MAX_SLOT_NR  8
+
+/* Most machines have only one MCA bus.  The only multiple bus machines
+ * I know have at most two */
+#define MAX_MCA_BUSSES 2
+
+#define MCA_PRIMARY_BUS		0
+#define MCA_SECONDARY_BUS	1
+
+/* Dummy slot numbers on primary MCA for integrated functions */
+#define MCA_INTEGSCSI	(MCA_MAX_SLOT_NR)
+#define MCA_INTEGVIDEO	(MCA_MAX_SLOT_NR+1)
+#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2)
+
+/* Dummy POS values for integrated functions */
+#define MCA_DUMMY_POS_START	0x10000
+#define MCA_INTEGSCSI_POS	(MCA_DUMMY_POS_START+1)
+#define MCA_INTEGVIDEO_POS	(MCA_DUMMY_POS_START+2)
+#define MCA_MOTHERBOARD_POS	(MCA_DUMMY_POS_START+3)
+
+/* MCA registers */
+
+#define MCA_MOTHERBOARD_SETUP_REG	0x94
+#define MCA_ADAPTER_SETUP_REG		0x96
+#define MCA_POS_REG(n)			(0x100+(n))
+
+#define MCA_ENABLED	0x01	/* POS 2, set if adapter enabled */
+
+/* Max number of adapters, including both slots and various integrated
+ * things.
+ */
+#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
+
+#endif /* _ASM_X86_MCA_H */
diff --git a/arch/x86/include/asm/mca_dma.h b/arch/x86/include/asm/mca_dma.h
new file mode 100644
index 0000000..45271ae
--- /dev/null
+++ b/arch/x86/include/asm/mca_dma.h
@@ -0,0 +1,201 @@
+#ifndef _ASM_X86_MCA_DMA_H
+#define _ASM_X86_MCA_DMA_H
+
+#include <asm/io.h>
+#include <linux/ioport.h>
+
+/*
+ * Microchannel specific DMA stuff.  DMA on an MCA machine is fairly similar to
+ *   standard PC dma, but it certainly has its quirks.  DMA register addresses
+ *   are in a different place and there are some added functions.  Most of this
+ *   should be pretty obvious on inspection.  Note that the user must divide
+ *   count by 2 when using 16-bit dma; that is not handled by these functions.
+ *
+ * Ramen Noodles are yummy.
+ *
+ *  1998 Tymm Twillman <tymm@computer.org>
+ */
+
+/*
+ * Registers that are used by the DMA controller; FN is the function register
+ *   (tell the controller what to do) and EXE is the execution register (how
+ *   to do it)
+ */
+
+#define MCA_DMA_REG_FN  0x18
+#define MCA_DMA_REG_EXE 0x1A
+
+/*
+ * Functions that the DMA controller can do
+ */
+
+#define MCA_DMA_FN_SET_IO       0x00
+#define MCA_DMA_FN_SET_ADDR     0x20
+#define MCA_DMA_FN_GET_ADDR     0x30
+#define MCA_DMA_FN_SET_COUNT    0x40
+#define MCA_DMA_FN_GET_COUNT    0x50
+#define MCA_DMA_FN_GET_STATUS   0x60
+#define MCA_DMA_FN_SET_MODE     0x70
+#define MCA_DMA_FN_SET_ARBUS    0x80
+#define MCA_DMA_FN_MASK         0x90
+#define MCA_DMA_FN_RESET_MASK   0xA0
+#define MCA_DMA_FN_MASTER_CLEAR 0xD0
+
+/*
+ * Modes (used by setting MCA_DMA_FN_MODE in the function register)
+ *
+ * Note that the MODE_READ is read from memory (write to device), and
+ *   MODE_WRITE is vice-versa.
+ */
+
+#define MCA_DMA_MODE_XFER  0x04  /* read by default */
+#define MCA_DMA_MODE_READ  0x04  /* same as XFER */
+#define MCA_DMA_MODE_WRITE 0x08  /* OR with MODE_XFER to use */
+#define MCA_DMA_MODE_IO    0x01  /* DMA from IO register */
+#define MCA_DMA_MODE_16    0x40  /* 16 bit xfers */
+
+
+/**
+ *	mca_enable_dma	-	channel to enable DMA on
+ *	@dmanr: DMA channel
+ *
+ *	Enable the MCA bus DMA on a channel. This can be called from
+ *	IRQ context.
+ */
+
+static inline void mca_enable_dma(unsigned int dmanr)
+{
+	outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN);
+}
+
+/**
+ *	mca_disble_dma	-	channel to disable DMA on
+ *	@dmanr: DMA channel
+ *
+ *	Enable the MCA bus DMA on a channel. This can be called from
+ *	IRQ context.
+ */
+
+static inline void mca_disable_dma(unsigned int dmanr)
+{
+	outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN);
+}
+
+/**
+ *	mca_set_dma_addr -	load a 24bit DMA address
+ *	@dmanr: DMA channel
+ *	@a: 24bit bus address
+ *
+ *	Load the address register in the DMA controller. This has a 24bit
+ *	limitation (16Mb).
+ */
+
+static inline void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN);
+	outb(a & 0xff, MCA_DMA_REG_EXE);
+	outb((a >> 8) & 0xff, MCA_DMA_REG_EXE);
+	outb((a >> 16) & 0xff, MCA_DMA_REG_EXE);
+}
+
+/**
+ *	mca_get_dma_addr -	load a 24bit DMA address
+ *	@dmanr: DMA channel
+ *
+ *	Read the address register in the DMA controller. This has a 24bit
+ *	limitation (16Mb). The return is a bus address.
+ */
+
+static inline unsigned int mca_get_dma_addr(unsigned int dmanr)
+{
+	unsigned int addr;
+
+	outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN);
+	addr = inb(MCA_DMA_REG_EXE);
+	addr |= inb(MCA_DMA_REG_EXE) << 8;
+	addr |= inb(MCA_DMA_REG_EXE) << 16;
+
+	return addr;
+}
+
+/**
+ *	mca_set_dma_count -	load a 16bit transfer count
+ *	@dmanr: DMA channel
+ *	@count: count
+ *
+ *	Set the DMA count for this channel. This can be up to 64Kbytes.
+ *	Setting a count of zero will not do what you expect.
+ */
+
+static inline void mca_set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	count--;  /* transfers one more than count -- correct for this */
+
+	outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN);
+	outb(count & 0xff, MCA_DMA_REG_EXE);
+	outb((count >> 8) & 0xff, MCA_DMA_REG_EXE);
+}
+
+/**
+ *	mca_get_dma_residue -	get the remaining bytes to transfer
+ *	@dmanr: DMA channel
+ *
+ *	This function returns the number of bytes left to transfer
+ *	on this DMA channel.
+ */
+
+static inline unsigned int mca_get_dma_residue(unsigned int dmanr)
+{
+	unsigned short count;
+
+	outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN);
+	count = 1 + inb(MCA_DMA_REG_EXE);
+	count += inb(MCA_DMA_REG_EXE) << 8;
+
+	return count;
+}
+
+/**
+ *	mca_set_dma_io -	set the port for an I/O transfer
+ *	@dmanr: DMA channel
+ *	@io_addr: an I/O port number
+ *
+ *	Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer
+ *	with an I/O port target.
+ */
+
+static inline void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
+{
+	/*
+	 * DMA from a port address -- set the io address
+	 */
+
+	outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN);
+	outb(io_addr & 0xff, MCA_DMA_REG_EXE);
+	outb((io_addr >>  8) & 0xff, MCA_DMA_REG_EXE);
+}
+
+/**
+ *	mca_set_dma_mode -	set the DMA mode
+ *	@dmanr: DMA channel
+ *	@mode: mode to set
+ *
+ *	The DMA controller supports several modes. The mode values you can
+ *	set are-
+ *
+ *	%MCA_DMA_MODE_READ when reading from the DMA device.
+ *
+ *	%MCA_DMA_MODE_WRITE to writing to the DMA device.
+ *
+ *	%MCA_DMA_MODE_IO to do DMA to or from an I/O port.
+ *
+ *	%MCA_DMA_MODE_16 to do 16bit transfers.
+ */
+
+static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+	outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN);
+	outb(mode, MCA_DMA_REG_EXE);
+}
+
+#endif /* _ASM_X86_MCA_DMA_H */
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
new file mode 100644
index 0000000..1d6e17c
--- /dev/null
+++ b/arch/x86/include/asm/mce.h
@@ -0,0 +1,130 @@
+#ifndef _ASM_X86_MCE_H
+#define _ASM_X86_MCE_H
+
+#ifdef __x86_64__
+
+#include <asm/ioctls.h>
+#include <asm/types.h>
+
+/*
+ * Machine Check support for x86
+ */
+
+#define MCG_CTL_P	 (1UL<<8)   /* MCG_CAP register available */
+
+#define MCG_STATUS_RIPV  (1UL<<0)   /* restart ip valid */
+#define MCG_STATUS_EIPV  (1UL<<1)   /* ip points to correct instruction */
+#define MCG_STATUS_MCIP  (1UL<<2)   /* machine check in progress */
+
+#define MCI_STATUS_VAL   (1UL<<63)  /* valid error */
+#define MCI_STATUS_OVER  (1UL<<62)  /* previous errors lost */
+#define MCI_STATUS_UC    (1UL<<61)  /* uncorrected error */
+#define MCI_STATUS_EN    (1UL<<60)  /* error enabled */
+#define MCI_STATUS_MISCV (1UL<<59)  /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1UL<<58)  /* addr reg. valid */
+#define MCI_STATUS_PCC   (1UL<<57)  /* processor context corrupt */
+
+/* Fields are zero when not available */
+struct mce {
+	__u64 status;
+	__u64 misc;
+	__u64 addr;
+	__u64 mcgstatus;
+	__u64 ip;
+	__u64 tsc;	/* cpu time stamp counter */
+	__u64 res1;	/* for future extension */
+	__u64 res2;	/* dito. */
+	__u8  cs;		/* code segment */
+	__u8  bank;	/* machine check bank */
+	__u8  cpu;	/* cpu that raised the error */
+	__u8  finished;   /* entry is valid */
+	__u32 pad;
+};
+
+/*
+ * This structure contains all data related to the MCE log.  Also
+ * carries a signature to make it easier to find from external
+ * debugging tools.  Each entry is only valid when its finished flag
+ * is set.
+ */
+
+#define MCE_LOG_LEN 32
+
+struct mce_log {
+	char signature[12]; /* "MACHINECHECK" */
+	unsigned len;	    /* = MCE_LOG_LEN */
+	unsigned next;
+	unsigned flags;
+	unsigned pad0;
+	struct mce entry[MCE_LOG_LEN];
+};
+
+#define MCE_OVERFLOW 0		/* bit 0 in flags means overflow */
+
+#define MCE_LOG_SIGNATURE	"MACHINECHECK"
+
+#define MCE_GET_RECORD_LEN   _IOR('M', 1, int)
+#define MCE_GET_LOG_LEN      _IOR('M', 2, int)
+#define MCE_GETCLEAR_FLAGS   _IOR('M', 3, int)
+
+/* Software defined banks */
+#define MCE_EXTENDED_BANK	128
+#define MCE_THERMAL_BANK	MCE_EXTENDED_BANK + 0
+
+#define K8_MCE_THRESHOLD_BASE      (MCE_EXTENDED_BANK + 1)      /* MCE_AMD */
+#define K8_MCE_THRESHOLD_BANK_0    (MCE_THRESHOLD_BASE + 0 * 9)
+#define K8_MCE_THRESHOLD_BANK_1    (MCE_THRESHOLD_BASE + 1 * 9)
+#define K8_MCE_THRESHOLD_BANK_2    (MCE_THRESHOLD_BASE + 2 * 9)
+#define K8_MCE_THRESHOLD_BANK_3    (MCE_THRESHOLD_BASE + 3 * 9)
+#define K8_MCE_THRESHOLD_BANK_4    (MCE_THRESHOLD_BASE + 4 * 9)
+#define K8_MCE_THRESHOLD_BANK_5    (MCE_THRESHOLD_BASE + 5 * 9)
+#define K8_MCE_THRESHOLD_DRAM_ECC  (MCE_THRESHOLD_BANK_4 + 0)
+
+#endif /* __x86_64__ */
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_X86_32
+extern int mce_disabled;
+#else /* CONFIG_X86_32 */
+
+#include <asm/atomic.h>
+
+void mce_log(struct mce *m);
+DECLARE_PER_CPU(struct sys_device, device_mce);
+extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
+
+#ifdef CONFIG_X86_MCE_INTEL
+void mce_intel_feature_init(struct cpuinfo_x86 *c);
+#else
+static inline void mce_intel_feature_init(struct cpuinfo_x86 *c) { }
+#endif
+
+#ifdef CONFIG_X86_MCE_AMD
+void mce_amd_feature_init(struct cpuinfo_x86 *c);
+#else
+static inline void mce_amd_feature_init(struct cpuinfo_x86 *c) { }
+#endif
+
+void mce_log_therm_throt_event(unsigned int cpu, __u64 status);
+
+extern atomic_t mce_entry;
+
+extern void do_machine_check(struct pt_regs *, long);
+extern int mce_notify_user(void);
+
+#endif /* !CONFIG_X86_32 */
+
+
+
+#ifdef CONFIG_X86_MCE
+extern void mcheck_init(struct cpuinfo_x86 *c);
+#else
+#define mcheck_init(c) do { } while (0)
+#endif
+extern void stop_mce(void);
+extern void restart_mce(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
new file mode 100644
index 0000000..c882664
--- /dev/null
+++ b/arch/x86/include/asm/microcode.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_X86_MICROCODE_H
+#define _ASM_X86_MICROCODE_H
+
+struct cpu_signature {
+	unsigned int sig;
+	unsigned int pf;
+	unsigned int rev;
+};
+
+struct device;
+
+struct microcode_ops {
+	int  (*request_microcode_user) (int cpu, const void __user *buf, size_t size);
+	int  (*request_microcode_fw) (int cpu, struct device *device);
+
+	void (*apply_microcode) (int cpu);
+
+	int  (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
+	void (*microcode_fini_cpu) (int cpu);
+};
+
+struct ucode_cpu_info {
+	struct cpu_signature cpu_sig;
+	int valid;
+	void *mc;
+};
+extern struct ucode_cpu_info ucode_cpu_info[];
+
+#ifdef CONFIG_MICROCODE_INTEL
+extern struct microcode_ops * __init init_intel_microcode(void);
+#else
+static inline struct microcode_ops * __init init_intel_microcode(void)
+{
+	return NULL;
+}
+#endif /* CONFIG_MICROCODE_INTEL */
+
+#ifdef CONFIG_MICROCODE_AMD
+extern struct microcode_ops * __init init_amd_microcode(void);
+#else
+static inline struct microcode_ops * __init init_amd_microcode(void)
+{
+	return NULL;
+}
+#endif
+
+#endif /* _ASM_X86_MICROCODE_H */
diff --git a/arch/x86/include/asm/mman.h b/arch/x86/include/asm/mman.h
new file mode 100644
index 0000000..90bc410
--- /dev/null
+++ b/arch/x86/include/asm/mman.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_MMAN_H
+#define _ASM_X86_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_32BIT	0x40		/* only give out 32bit addresses */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/asm/mmconfig.h b/arch/x86/include/asm/mmconfig.h
new file mode 100644
index 0000000..9b119da
--- /dev/null
+++ b/arch/x86/include/asm/mmconfig.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_MMCONFIG_H
+#define _ASM_X86_MMCONFIG_H
+
+#ifdef CONFIG_PCI_MMCONFIG
+extern void __cpuinit fam10h_check_enable_mmcfg(void);
+extern void __cpuinit check_enable_amd_mmconf_dmi(void);
+#else
+static inline void fam10h_check_enable_mmcfg(void) { }
+static inline void check_enable_amd_mmconf_dmi(void) { }
+#endif
+
+#endif /* _ASM_X86_MMCONFIG_H */
diff --git a/arch/x86/include/asm/mmu.h b/arch/x86/include/asm/mmu.h
new file mode 100644
index 0000000..80a1dee
--- /dev/null
+++ b/arch/x86/include/asm/mmu.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_X86_MMU_H
+#define _ASM_X86_MMU_H
+
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+
+/*
+ * The x86 doesn't have a mmu context, but
+ * we put the segment information here.
+ */
+typedef struct {
+	void *ldt;
+	int size;
+	struct mutex lock;
+	void *vdso;
+} mm_context_t;
+
+#ifdef CONFIG_SMP
+void leave_mm(int cpu);
+#else
+static inline void leave_mm(int cpu)
+{
+}
+#endif
+
+#endif /* _ASM_X86_MMU_H */
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
new file mode 100644
index 0000000..8aeeb3f
--- /dev/null
+++ b/arch/x86/include/asm/mmu_context.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_X86_MMU_CONTEXT_H
+#define _ASM_X86_MMU_CONTEXT_H
+
+#include <asm/desc.h>
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/paravirt.h>
+#ifndef CONFIG_PARAVIRT
+#include <asm-generic/mm_hooks.h>
+
+static inline void paravirt_activate_mm(struct mm_struct *prev,
+					struct mm_struct *next)
+{
+}
+#endif	/* !CONFIG_PARAVIRT */
+
+/*
+ * Used for LDT copy/destruction.
+ */
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+void destroy_context(struct mm_struct *mm);
+
+#ifdef CONFIG_X86_32
+# include "mmu_context_32.h"
+#else
+# include "mmu_context_64.h"
+#endif
+
+#define activate_mm(prev, next)			\
+do {						\
+	paravirt_activate_mm((prev), (next));	\
+	switch_mm((prev), (next), NULL);	\
+} while (0);
+
+
+#endif /* _ASM_X86_MMU_CONTEXT_H */
diff --git a/arch/x86/include/asm/mmu_context_32.h b/arch/x86/include/asm/mmu_context_32.h
new file mode 100644
index 0000000..8e10015
--- /dev/null
+++ b/arch/x86/include/asm/mmu_context_32.h
@@ -0,0 +1,56 @@
+#ifndef _ASM_X86_MMU_CONTEXT_32_H
+#define _ASM_X86_MMU_CONTEXT_32_H
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+#ifdef CONFIG_SMP
+	unsigned cpu = smp_processor_id();
+	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
+		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_LAZY;
+#endif
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			     struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	int cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+		/* stop flush ipis for the previous mm */
+		cpu_clear(cpu, prev->cpu_vm_mask);
+#ifdef CONFIG_SMP
+		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_OK;
+		per_cpu(cpu_tlbstate, cpu).active_mm = next;
+#endif
+		cpu_set(cpu, next->cpu_vm_mask);
+
+		/* Re-load page tables */
+		load_cr3(next->pgd);
+
+		/*
+		 * load the LDT, if the LDT is different:
+		 */
+		if (unlikely(prev->context.ldt != next->context.ldt))
+			load_LDT_nolock(&next->context);
+	}
+#ifdef CONFIG_SMP
+	else {
+		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_OK;
+		BUG_ON(per_cpu(cpu_tlbstate, cpu).active_mm != next);
+
+		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
+			/* We were in lazy tlb mode and leave_mm disabled
+			 * tlb flush IPI delivery. We must reload %cr3.
+			 */
+			load_cr3(next->pgd);
+			load_LDT_nolock(&next->context);
+		}
+	}
+#endif
+}
+
+#define deactivate_mm(tsk, mm)			\
+	asm("movl %0,%%gs": :"r" (0));
+
+#endif /* _ASM_X86_MMU_CONTEXT_32_H */
diff --git a/arch/x86/include/asm/mmu_context_64.h b/arch/x86/include/asm/mmu_context_64.h
new file mode 100644
index 0000000..677d36e
--- /dev/null
+++ b/arch/x86/include/asm/mmu_context_64.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_X86_MMU_CONTEXT_64_H
+#define _ASM_X86_MMU_CONTEXT_64_H
+
+#include <asm/pda.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+#ifdef CONFIG_SMP
+	if (read_pda(mmu_state) == TLBSTATE_OK)
+		write_pda(mmu_state, TLBSTATE_LAZY);
+#endif
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	unsigned cpu = smp_processor_id();
+	if (likely(prev != next)) {
+		/* stop flush ipis for the previous mm */
+		cpu_clear(cpu, prev->cpu_vm_mask);
+#ifdef CONFIG_SMP
+		write_pda(mmu_state, TLBSTATE_OK);
+		write_pda(active_mm, next);
+#endif
+		cpu_set(cpu, next->cpu_vm_mask);
+		load_cr3(next->pgd);
+
+		if (unlikely(next->context.ldt != prev->context.ldt))
+			load_LDT_nolock(&next->context);
+	}
+#ifdef CONFIG_SMP
+	else {
+		write_pda(mmu_state, TLBSTATE_OK);
+		if (read_pda(active_mm) != next)
+			BUG();
+		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
+			/* We were in lazy tlb mode and leave_mm disabled
+			 * tlb flush IPI delivery. We must reload CR3
+			 * to make sure to use no freed page tables.
+			 */
+			load_cr3(next->pgd);
+			load_LDT_nolock(&next->context);
+		}
+	}
+#endif
+}
+
+#define deactivate_mm(tsk, mm)			\
+do {						\
+	load_gs_index(0);			\
+	asm volatile("movl %0,%%fs"::"r"(0));	\
+} while (0)
+
+#endif /* _ASM_X86_MMU_CONTEXT_64_H */
diff --git a/arch/x86/include/asm/mmx.h b/arch/x86/include/asm/mmx.h
new file mode 100644
index 0000000..5cbf313
--- /dev/null
+++ b/arch/x86/include/asm/mmx.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_X86_MMX_H
+#define _ASM_X86_MMX_H
+
+/*
+ *	MMX 3Dnow! helper operations
+ */
+
+#include <linux/types.h>
+
+extern void *_mmx_memcpy(void *to, const void *from, size_t size);
+extern void mmx_clear_page(void *page);
+extern void mmx_copy_page(void *to, void *from);
+
+#endif /* _ASM_X86_MMX_H */
diff --git a/arch/x86/include/asm/mmzone.h b/arch/x86/include/asm/mmzone.h
new file mode 100644
index 0000000..64217ea
--- /dev/null
+++ b/arch/x86/include/asm/mmzone.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "mmzone_32.h"
+#else
+# include "mmzone_64.h"
+#endif
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
new file mode 100644
index 0000000..485bdf0
--- /dev/null
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -0,0 +1,134 @@
+/*
+ * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002
+ *
+ */
+
+#ifndef _ASM_X86_MMZONE_32_H
+#define _ASM_X86_MMZONE_32_H
+
+#include <asm/smp.h>
+
+#ifdef CONFIG_NUMA
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)	(node_data[nid])
+
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
+
+extern int get_memcfg_numa_flat(void);
+/*
+ * This allows any one NUMA architecture to be compiled
+ * for, and still fall back to the flat function if it
+ * fails.
+ */
+static inline void get_memcfg_numa(void)
+{
+
+	if (get_memcfg_numaq())
+		return;
+	if (get_memcfg_from_srat())
+		return;
+	get_memcfg_numa_flat();
+}
+
+extern int early_pfn_to_nid(unsigned long pfn);
+
+#else /* !CONFIG_NUMA */
+
+#define get_memcfg_numa get_memcfg_numa_flat
+
+#endif /* CONFIG_NUMA */
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * generic node memory support, the following assumptions apply:
+ *
+ * 1) memory comes in 64Mb contigious chunks which are either present or not
+ * 2) we will not have more than 64Gb in total
+ *
+ * for now assume that 64Gb is max amount of RAM for whole system
+ *    64Gb / 4096bytes/page = 16777216 pages
+ */
+#define MAX_NR_PAGES 16777216
+#define MAX_ELEMENTS 1024
+#define PAGES_PER_ELEMENT (MAX_NR_PAGES/MAX_ELEMENTS)
+
+extern s8 physnode_map[];
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+#ifdef CONFIG_NUMA
+	return((int) physnode_map[(pfn) / PAGES_PER_ELEMENT]);
+#else
+	return 0;
+#endif
+}
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)						\
+({									\
+	pg_data_t *__pgdat = NODE_DATA(nid);				\
+	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
+})
+
+static inline int pfn_valid(int pfn)
+{
+	int nid = pfn_to_nid(pfn);
+
+	if (nid >= 0)
+		return (pfn < node_end_pfn(nid));
+	return 0;
+}
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+
+/*
+ * Following are macros that are specific to this numa platform.
+ */
+#define reserve_bootmem(addr, size, flags) \
+	reserve_bootmem_node(NODE_DATA(0), (addr), (size), (flags))
+#define alloc_bootmem(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_nopanic(x) \
+	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), SMP_CACHE_BYTES, \
+				__pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0)
+#define alloc_bootmem_pages(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_nopanic(x) \
+	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), PAGE_SIZE, \
+				__pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low_pages(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
+#define alloc_bootmem_node(pgdat, x)					\
+({									\
+	struct pglist_data  __maybe_unused			\
+				*__alloc_bootmem_node__pgdat = (pgdat);	\
+	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES,	\
+						__pa(MAX_DMA_ADDRESS));	\
+})
+#define alloc_bootmem_pages_node(pgdat, x)				\
+({									\
+	struct pglist_data  __maybe_unused			\
+				*__alloc_bootmem_node__pgdat = (pgdat);	\
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE,		\
+						__pa(MAX_DMA_ADDRESS));	\
+})
+#define alloc_bootmem_low_pages_node(pgdat, x)				\
+({									\
+	struct pglist_data  __maybe_unused			\
+				*__alloc_bootmem_node__pgdat = (pgdat);	\
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0);		\
+})
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#endif /* _ASM_X86_MMZONE_32_H */
diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h
new file mode 100644
index 0000000..a5b3817
--- /dev/null
+++ b/arch/x86/include/asm/mmzone_64.h
@@ -0,0 +1,51 @@
+/* K8 NUMA support */
+/* Copyright 2002,2003 by Andi Kleen, SuSE Labs */
+/* 2.5 Version loosely based on the NUMAQ Code by Pat Gaughen. */
+#ifndef _ASM_X86_MMZONE_64_H
+#define _ASM_X86_MMZONE_64_H
+
+
+#ifdef CONFIG_NUMA
+
+#include <linux/mmdebug.h>
+
+#include <asm/smp.h>
+
+/* Simple perfect hash to map physical addresses to node numbers */
+struct memnode {
+	int shift;
+	unsigned int mapsize;
+	s16 *map;
+	s16 embedded_map[64 - 8];
+} ____cacheline_aligned; /* total size = 128 bytes */
+extern struct memnode memnode;
+#define memnode_shift memnode.shift
+#define memnodemap memnode.map
+#define memnodemapsize memnode.mapsize
+
+extern struct pglist_data *node_data[];
+
+static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
+{
+	unsigned nid;
+	VIRTUAL_BUG_ON(!memnodemap);
+	nid = memnodemap[addr >> memnode_shift];
+	VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]);
+	return nid;
+}
+
+#define NODE_DATA(nid)		(node_data[nid])
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)       (NODE_DATA(nid)->node_start_pfn +	\
+				 NODE_DATA(nid)->node_spanned_pages)
+
+extern int early_pfn_to_nid(unsigned long pfn);
+
+#ifdef CONFIG_NUMA_EMU
+#define FAKE_NODE_MIN_SIZE	(64 * 1024 * 1024)
+#define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))
+#endif
+
+#endif
+#endif /* _ASM_X86_MMZONE_64_H */
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
new file mode 100644
index 0000000..47d6274
--- /dev/null
+++ b/arch/x86/include/asm/module.h
@@ -0,0 +1,80 @@
+#ifndef _ASM_X86_MODULE_H
+#define _ASM_X86_MODULE_H
+
+/* x86_32/64 are simple */
+struct mod_arch_specific {};
+
+#ifdef CONFIG_X86_32
+# define Elf_Shdr Elf32_Shdr
+# define Elf_Sym Elf32_Sym
+# define Elf_Ehdr Elf32_Ehdr
+#else
+# define Elf_Shdr Elf64_Shdr
+# define Elf_Sym Elf64_Sym
+# define Elf_Ehdr Elf64_Ehdr
+#endif
+
+#ifdef CONFIG_X86_64
+/* X86_64 does not define MODULE_PROC_FAMILY */
+#elif defined CONFIG_M386
+#define MODULE_PROC_FAMILY "386 "
+#elif defined CONFIG_M486
+#define MODULE_PROC_FAMILY "486 "
+#elif defined CONFIG_M586
+#define MODULE_PROC_FAMILY "586 "
+#elif defined CONFIG_M586TSC
+#define MODULE_PROC_FAMILY "586TSC "
+#elif defined CONFIG_M586MMX
+#define MODULE_PROC_FAMILY "586MMX "
+#elif defined CONFIG_MCORE2
+#define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_M686
+#define MODULE_PROC_FAMILY "686 "
+#elif defined CONFIG_MPENTIUMII
+#define MODULE_PROC_FAMILY "PENTIUMII "
+#elif defined CONFIG_MPENTIUMIII
+#define MODULE_PROC_FAMILY "PENTIUMIII "
+#elif defined CONFIG_MPENTIUMM
+#define MODULE_PROC_FAMILY "PENTIUMM "
+#elif defined CONFIG_MPENTIUM4
+#define MODULE_PROC_FAMILY "PENTIUM4 "
+#elif defined CONFIG_MK6
+#define MODULE_PROC_FAMILY "K6 "
+#elif defined CONFIG_MK7
+#define MODULE_PROC_FAMILY "K7 "
+#elif defined CONFIG_MK8
+#define MODULE_PROC_FAMILY "K8 "
+#elif defined CONFIG_X86_ELAN
+#define MODULE_PROC_FAMILY "ELAN "
+#elif defined CONFIG_MCRUSOE
+#define MODULE_PROC_FAMILY "CRUSOE "
+#elif defined CONFIG_MEFFICEON
+#define MODULE_PROC_FAMILY "EFFICEON "
+#elif defined CONFIG_MWINCHIPC6
+#define MODULE_PROC_FAMILY "WINCHIPC6 "
+#elif defined CONFIG_MWINCHIP3D
+#define MODULE_PROC_FAMILY "WINCHIP3D "
+#elif defined CONFIG_MCYRIXIII
+#define MODULE_PROC_FAMILY "CYRIXIII "
+#elif defined CONFIG_MVIAC3_2
+#define MODULE_PROC_FAMILY "VIAC3-2 "
+#elif defined CONFIG_MVIAC7
+#define MODULE_PROC_FAMILY "VIAC7 "
+#elif defined CONFIG_MGEODEGX1
+#define MODULE_PROC_FAMILY "GEODEGX1 "
+#elif defined CONFIG_MGEODE_LX
+#define MODULE_PROC_FAMILY "GEODE "
+#else
+#error unknown processor family
+#endif
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_4KSTACKS
+#  define MODULE_STACKSIZE "4KSTACKS "
+# else
+#  define MODULE_STACKSIZE ""
+# endif
+# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_STACKSIZE
+#endif
+
+#endif /* _ASM_X86_MODULE_H */
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
new file mode 100644
index 0000000..91885c2
--- /dev/null
+++ b/arch/x86/include/asm/mpspec.h
@@ -0,0 +1,145 @@
+#ifndef _ASM_X86_MPSPEC_H
+#define _ASM_X86_MPSPEC_H
+
+#include <linux/init.h>
+
+#include <asm/mpspec_def.h>
+
+extern int apic_version[MAX_APICS];
+
+#ifdef CONFIG_X86_32
+#include <mach_mpspec.h>
+
+extern unsigned int def_to_bigsmp;
+extern u8 apicid_2_node[];
+extern int pic_mode;
+
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
+#define MAX_APICID 256
+
+#else
+
+#define MAX_MP_BUSSES 256
+/* Each PCI slot may be a combo card with its own bus.  4 IRQ pins per slot. */
+#define MAX_IRQ_SOURCES (MAX_MP_BUSSES * 4)
+
+#endif
+
+extern void early_find_smp_config(void);
+extern void early_get_smp_config(void);
+
+#if defined(CONFIG_MCA) || defined(CONFIG_EISA)
+extern int mp_bus_id_to_type[MAX_MP_BUSSES];
+#endif
+
+extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
+extern unsigned int boot_cpu_physical_apicid;
+extern unsigned int max_physical_apicid;
+extern int smp_found_config;
+extern int mpc_default_type;
+extern unsigned long mp_lapic_addr;
+
+extern void find_smp_config(void);
+extern void get_smp_config(void);
+#ifdef CONFIG_X86_MPPARSE
+extern void early_reserve_e820_mpc_new(void);
+#else
+static inline void early_reserve_e820_mpc_new(void) { }
+#endif
+
+void __cpuinit generic_processor_info(int apicid, int version);
+#ifdef CONFIG_ACPI
+extern void mp_register_ioapic(int id, u32 address, u32 gsi_base);
+extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
+				   u32 gsi);
+extern void mp_config_acpi_legacy_irqs(void);
+extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+#ifdef CONFIG_X86_IO_APIC
+extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+				u32 gsi, int triggering, int polarity);
+#else
+static inline int
+mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+		   u32 gsi, int triggering, int polarity)
+{
+	return 0;
+}
+#endif
+#endif /* CONFIG_ACPI */
+
+#define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
+
+struct physid_mask {
+	unsigned long mask[PHYSID_ARRAY_SIZE];
+};
+
+typedef struct physid_mask physid_mask_t;
+
+#define physid_set(physid, map)			set_bit(physid, (map).mask)
+#define physid_clear(physid, map)		clear_bit(physid, (map).mask)
+#define physid_isset(physid, map)		test_bit(physid, (map).mask)
+#define physid_test_and_set(physid, map)			\
+	test_and_set_bit(physid, (map).mask)
+
+#define physids_and(dst, src1, src2)					\
+	bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+
+#define physids_or(dst, src1, src2)					\
+	bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+
+#define physids_clear(map)					\
+	bitmap_zero((map).mask, MAX_APICS)
+
+#define physids_complement(dst, src)				\
+	bitmap_complement((dst).mask, (src).mask, MAX_APICS)
+
+#define physids_empty(map)					\
+	bitmap_empty((map).mask, MAX_APICS)
+
+#define physids_equal(map1, map2)				\
+	bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
+
+#define physids_weight(map)					\
+	bitmap_weight((map).mask, MAX_APICS)
+
+#define physids_shift_right(d, s, n)				\
+	bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
+
+#define physids_shift_left(d, s, n)				\
+	bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
+
+#define physids_coerce(map)			((map).mask[0])
+
+#define physids_promote(physids)					\
+	({								\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
+		__physid_mask.mask[0] = physids;			\
+		__physid_mask;						\
+	})
+
+/* Note: will create very large stack frames if physid_mask_t is big */
+#define physid_mask_of_physid(physid)					\
+	({								\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
+		physid_set(physid, __physid_mask);			\
+		__physid_mask;						\
+	})
+
+static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
+{
+	physids_clear(*map);
+	physid_set(physid, *map);
+}
+
+#define PHYSID_MASK_ALL		{ {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
+#define PHYSID_MASK_NONE	{ {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
+
+extern physid_mask_t phys_cpu_present_map;
+
+#endif /* _ASM_X86_MPSPEC_H */
diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h
new file mode 100644
index 0000000..e3ace7d
--- /dev/null
+++ b/arch/x86/include/asm/mpspec_def.h
@@ -0,0 +1,180 @@
+#ifndef _ASM_X86_MPSPEC_DEF_H
+#define _ASM_X86_MPSPEC_DEF_H
+
+/*
+ * Structure definitions for SMP machines following the
+ * Intel Multiprocessing Specification 1.1 and 1.4.
+ */
+
+/*
+ * This tag identifies where the SMP configuration
+ * information is.
+ */
+
+#define SMP_MAGIC_IDENT	(('_'<<24) | ('P'<<16) | ('M'<<8) | '_')
+
+#ifdef CONFIG_X86_32
+# define MAX_MPC_ENTRY 1024
+# define MAX_APICS      256
+#else
+# if NR_CPUS <= 255
+#  define MAX_APICS     255
+# else
+#  define MAX_APICS   32768
+# endif
+#endif
+
+struct intel_mp_floating {
+	char mpf_signature[4];		/* "_MP_"			*/
+	unsigned int mpf_physptr;	/* Configuration table address	*/
+	unsigned char mpf_length;	/* Our length (paragraphs)	*/
+	unsigned char mpf_specification;/* Specification version	*/
+	unsigned char mpf_checksum;	/* Checksum (makes sum 0)	*/
+	unsigned char mpf_feature1;	/* Standard or configuration ?	*/
+	unsigned char mpf_feature2;	/* Bit7 set for IMCR|PIC	*/
+	unsigned char mpf_feature3;	/* Unused (0)			*/
+	unsigned char mpf_feature4;	/* Unused (0)			*/
+	unsigned char mpf_feature5;	/* Unused (0)			*/
+};
+
+#define MPC_SIGNATURE "PCMP"
+
+struct mp_config_table {
+	char mpc_signature[4];
+	unsigned short mpc_length;	/* Size of table */
+	char mpc_spec;			/* 0x01 */
+	char mpc_checksum;
+	char mpc_oem[8];
+	char mpc_productid[12];
+	unsigned int mpc_oemptr;	/* 0 if not present */
+	unsigned short mpc_oemsize;	/* 0 if not present */
+	unsigned short mpc_oemcount;
+	unsigned int mpc_lapic;	/* APIC address */
+	unsigned int reserved;
+};
+
+/* Followed by entries */
+
+#define	MP_PROCESSOR		0
+#define	MP_BUS			1
+#define	MP_IOAPIC		2
+#define	MP_INTSRC		3
+#define	MP_LINTSRC		4
+/* Used by IBM NUMA-Q to describe node locality */
+#define	MP_TRANSLATION		192
+
+#define CPU_ENABLED		1	/* Processor is available */
+#define CPU_BOOTPROCESSOR	2	/* Processor is the BP */
+
+#define CPU_STEPPING_MASK	0x000F
+#define CPU_MODEL_MASK		0x00F0
+#define CPU_FAMILY_MASK		0x0F00
+
+struct mpc_config_processor {
+	unsigned char mpc_type;
+	unsigned char mpc_apicid;	/* Local APIC number */
+	unsigned char mpc_apicver;	/* Its versions */
+	unsigned char mpc_cpuflag;
+	unsigned int mpc_cpufeature;
+	unsigned int mpc_featureflag;	/* CPUID feature value */
+	unsigned int mpc_reserved[2];
+};
+
+struct mpc_config_bus {
+	unsigned char mpc_type;
+	unsigned char mpc_busid;
+	unsigned char mpc_bustype[6];
+};
+
+/* List of Bus Type string values, Intel MP Spec. */
+#define BUSTYPE_EISA	"EISA"
+#define BUSTYPE_ISA	"ISA"
+#define BUSTYPE_INTERN	"INTERN"	/* Internal BUS */
+#define BUSTYPE_MCA	"MCA"
+#define BUSTYPE_VL	"VL"		/* Local bus */
+#define BUSTYPE_PCI	"PCI"
+#define BUSTYPE_PCMCIA	"PCMCIA"
+#define BUSTYPE_CBUS	"CBUS"
+#define BUSTYPE_CBUSII	"CBUSII"
+#define BUSTYPE_FUTURE	"FUTURE"
+#define BUSTYPE_MBI	"MBI"
+#define BUSTYPE_MBII	"MBII"
+#define BUSTYPE_MPI	"MPI"
+#define BUSTYPE_MPSA	"MPSA"
+#define BUSTYPE_NUBUS	"NUBUS"
+#define BUSTYPE_TC	"TC"
+#define BUSTYPE_VME	"VME"
+#define BUSTYPE_XPRESS	"XPRESS"
+
+#define MPC_APIC_USABLE		0x01
+
+struct mpc_config_ioapic {
+	unsigned char mpc_type;
+	unsigned char mpc_apicid;
+	unsigned char mpc_apicver;
+	unsigned char mpc_flags;
+	unsigned int mpc_apicaddr;
+};
+
+struct mpc_config_intsrc {
+	unsigned char mpc_type;
+	unsigned char mpc_irqtype;
+	unsigned short mpc_irqflag;
+	unsigned char mpc_srcbus;
+	unsigned char mpc_srcbusirq;
+	unsigned char mpc_dstapic;
+	unsigned char mpc_dstirq;
+};
+
+enum mp_irq_source_types {
+	mp_INT = 0,
+	mp_NMI = 1,
+	mp_SMI = 2,
+	mp_ExtINT = 3
+};
+
+#define MP_IRQDIR_DEFAULT	0
+#define MP_IRQDIR_HIGH		1
+#define MP_IRQDIR_LOW		3
+
+#define MP_APIC_ALL	0xFF
+
+struct mpc_config_lintsrc {
+	unsigned char mpc_type;
+	unsigned char mpc_irqtype;
+	unsigned short mpc_irqflag;
+	unsigned char mpc_srcbusid;
+	unsigned char mpc_srcbusirq;
+	unsigned char mpc_destapic;
+	unsigned char mpc_destapiclint;
+};
+
+#define MPC_OEM_SIGNATURE "_OEM"
+
+struct mp_config_oemtable {
+	char oem_signature[4];
+	unsigned short oem_length;	/* Size of table */
+	char  oem_rev;			/* 0x01 */
+	char  oem_checksum;
+	char  mpc_oem[8];
+};
+
+/*
+ *	Default configurations
+ *
+ *	1	2 CPU ISA 82489DX
+ *	2	2 CPU EISA 82489DX neither IRQ 0 timer nor IRQ 13 DMA chaining
+ *	3	2 CPU EISA 82489DX
+ *	4	2 CPU MCA 82489DX
+ *	5	2 CPU ISA+PCI
+ *	6	2 CPU EISA+PCI
+ *	7	2 CPU MCA+PCI
+ */
+
+enum mp_bustype {
+	MP_BUS_ISA = 1,
+	MP_BUS_EISA,
+	MP_BUS_PCI,
+	MP_BUS_MCA,
+};
+#endif /* _ASM_X86_MPSPEC_DEF_H */
diff --git a/arch/x86/include/asm/msgbuf.h b/arch/x86/include/asm/msgbuf.h
new file mode 100644
index 0000000..7e4e948
--- /dev/null
+++ b/arch/x86/include/asm/msgbuf.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_X86_MSGBUF_H
+#define _ASM_X86_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space on i386 is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ *
+ * Pad space on x8664 is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#ifdef __i386__
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#ifdef __i386__
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+#ifdef __i386__
+	unsigned long	__unused3;
+#endif
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _ASM_X86_MSGBUF_H */
diff --git a/arch/x86/include/asm/msidef.h b/arch/x86/include/asm/msidef.h
new file mode 100644
index 0000000..6706b30
--- /dev/null
+++ b/arch/x86/include/asm/msidef.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_X86_MSIDEF_H
+#define _ASM_X86_MSIDEF_H
+
+/*
+ * Constants for Intel APIC based MSI messages.
+ */
+
+/*
+ * Shifts for MSI data
+ */
+
+#define MSI_DATA_VECTOR_SHIFT		0
+#define  MSI_DATA_VECTOR_MASK		0x000000ff
+#define	 MSI_DATA_VECTOR(v)		(((v) << MSI_DATA_VECTOR_SHIFT) & \
+					 MSI_DATA_VECTOR_MASK)
+
+#define MSI_DATA_DELIVERY_MODE_SHIFT	8
+#define  MSI_DATA_DELIVERY_FIXED	(0 << MSI_DATA_DELIVERY_MODE_SHIFT)
+#define  MSI_DATA_DELIVERY_LOWPRI	(1 << MSI_DATA_DELIVERY_MODE_SHIFT)
+
+#define MSI_DATA_LEVEL_SHIFT		14
+#define	 MSI_DATA_LEVEL_DEASSERT	(0 << MSI_DATA_LEVEL_SHIFT)
+#define	 MSI_DATA_LEVEL_ASSERT		(1 << MSI_DATA_LEVEL_SHIFT)
+
+#define MSI_DATA_TRIGGER_SHIFT		15
+#define  MSI_DATA_TRIGGER_EDGE		(0 << MSI_DATA_TRIGGER_SHIFT)
+#define  MSI_DATA_TRIGGER_LEVEL		(1 << MSI_DATA_TRIGGER_SHIFT)
+
+/*
+ * Shift/mask fields for msi address
+ */
+
+#define MSI_ADDR_BASE_HI		0
+#define MSI_ADDR_BASE_LO		0xfee00000
+
+#define MSI_ADDR_DEST_MODE_SHIFT	2
+#define  MSI_ADDR_DEST_MODE_PHYSICAL	(0 << MSI_ADDR_DEST_MODE_SHIFT)
+#define	 MSI_ADDR_DEST_MODE_LOGICAL	(1 << MSI_ADDR_DEST_MODE_SHIFT)
+
+#define MSI_ADDR_REDIRECTION_SHIFT	3
+#define  MSI_ADDR_REDIRECTION_CPU	(0 << MSI_ADDR_REDIRECTION_SHIFT)
+					/* dedicated cpu */
+#define  MSI_ADDR_REDIRECTION_LOWPRI	(1 << MSI_ADDR_REDIRECTION_SHIFT)
+					/* lowest priority */
+
+#define MSI_ADDR_DEST_ID_SHIFT		12
+#define	 MSI_ADDR_DEST_ID_MASK		0x00ffff0
+#define  MSI_ADDR_DEST_ID(dest)		(((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
+					 MSI_ADDR_DEST_ID_MASK)
+
+#define MSI_ADDR_IR_EXT_INT		(1 << 4)
+#define MSI_ADDR_IR_SHV			(1 << 3)
+#define MSI_ADDR_IR_INDEX1(index)	((index & 0x8000) >> 13)
+#define MSI_ADDR_IR_INDEX2(index)	((index & 0x7fff) << 5)
+#endif /* _ASM_X86_MSIDEF_H */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
new file mode 100644
index 0000000..e38859d
--- /dev/null
+++ b/arch/x86/include/asm/msr-index.h
@@ -0,0 +1,332 @@
+#ifndef _ASM_X86_MSR_INDEX_H
+#define _ASM_X86_MSR_INDEX_H
+
+/* CPU model specific register (MSR) numbers */
+
+/* x86-64 specific MSRs */
+#define MSR_EFER		0xc0000080 /* extended feature register */
+#define MSR_STAR		0xc0000081 /* legacy mode SYSCALL target */
+#define MSR_LSTAR		0xc0000082 /* long mode SYSCALL target */
+#define MSR_CSTAR		0xc0000083 /* compat mode SYSCALL target */
+#define MSR_SYSCALL_MASK	0xc0000084 /* EFLAGS mask for syscall */
+#define MSR_FS_BASE		0xc0000100 /* 64bit FS base */
+#define MSR_GS_BASE		0xc0000101 /* 64bit GS base */
+#define MSR_KERNEL_GS_BASE	0xc0000102 /* SwapGS GS shadow */
+
+/* EFER bits: */
+#define _EFER_SCE		0  /* SYSCALL/SYSRET */
+#define _EFER_LME		8  /* Long mode enable */
+#define _EFER_LMA		10 /* Long mode active (read-only) */
+#define _EFER_NX		11 /* No execute enable */
+
+#define EFER_SCE		(1<<_EFER_SCE)
+#define EFER_LME		(1<<_EFER_LME)
+#define EFER_LMA		(1<<_EFER_LMA)
+#define EFER_NX			(1<<_EFER_NX)
+
+/* Intel MSRs. Some also available on other CPUs */
+#define MSR_IA32_PERFCTR0		0x000000c1
+#define MSR_IA32_PERFCTR1		0x000000c2
+#define MSR_FSB_FREQ			0x000000cd
+
+#define MSR_MTRRcap			0x000000fe
+#define MSR_IA32_BBL_CR_CTL		0x00000119
+
+#define MSR_IA32_SYSENTER_CS		0x00000174
+#define MSR_IA32_SYSENTER_ESP		0x00000175
+#define MSR_IA32_SYSENTER_EIP		0x00000176
+
+#define MSR_IA32_MCG_CAP		0x00000179
+#define MSR_IA32_MCG_STATUS		0x0000017a
+#define MSR_IA32_MCG_CTL		0x0000017b
+
+#define MSR_IA32_PEBS_ENABLE		0x000003f1
+#define MSR_IA32_DS_AREA		0x00000600
+#define MSR_IA32_PERF_CAPABILITIES	0x00000345
+
+#define MSR_MTRRfix64K_00000		0x00000250
+#define MSR_MTRRfix16K_80000		0x00000258
+#define MSR_MTRRfix16K_A0000		0x00000259
+#define MSR_MTRRfix4K_C0000		0x00000268
+#define MSR_MTRRfix4K_C8000		0x00000269
+#define MSR_MTRRfix4K_D0000		0x0000026a
+#define MSR_MTRRfix4K_D8000		0x0000026b
+#define MSR_MTRRfix4K_E0000		0x0000026c
+#define MSR_MTRRfix4K_E8000		0x0000026d
+#define MSR_MTRRfix4K_F0000		0x0000026e
+#define MSR_MTRRfix4K_F8000		0x0000026f
+#define MSR_MTRRdefType			0x000002ff
+
+#define MSR_IA32_CR_PAT			0x00000277
+
+#define MSR_IA32_DEBUGCTLMSR		0x000001d9
+#define MSR_IA32_LASTBRANCHFROMIP	0x000001db
+#define MSR_IA32_LASTBRANCHTOIP		0x000001dc
+#define MSR_IA32_LASTINTFROMIP		0x000001dd
+#define MSR_IA32_LASTINTTOIP		0x000001de
+
+/* DEBUGCTLMSR bits (others vary by model): */
+#define _DEBUGCTLMSR_LBR	0 /* last branch recording */
+#define _DEBUGCTLMSR_BTF	1 /* single-step on branches */
+
+#define DEBUGCTLMSR_LBR		(1UL << _DEBUGCTLMSR_LBR)
+#define DEBUGCTLMSR_BTF		(1UL << _DEBUGCTLMSR_BTF)
+
+#define MSR_IA32_MC0_CTL		0x00000400
+#define MSR_IA32_MC0_STATUS		0x00000401
+#define MSR_IA32_MC0_ADDR		0x00000402
+#define MSR_IA32_MC0_MISC		0x00000403
+
+#define MSR_P6_PERFCTR0			0x000000c1
+#define MSR_P6_PERFCTR1			0x000000c2
+#define MSR_P6_EVNTSEL0			0x00000186
+#define MSR_P6_EVNTSEL1			0x00000187
+
+/* AMD64 MSRs. Not complete. See the architecture manual for a more
+   complete list. */
+
+#define MSR_AMD64_NB_CFG		0xc001001f
+#define MSR_AMD64_IBSFETCHCTL		0xc0011030
+#define MSR_AMD64_IBSFETCHLINAD		0xc0011031
+#define MSR_AMD64_IBSFETCHPHYSAD	0xc0011032
+#define MSR_AMD64_IBSOPCTL		0xc0011033
+#define MSR_AMD64_IBSOPRIP		0xc0011034
+#define MSR_AMD64_IBSOPDATA		0xc0011035
+#define MSR_AMD64_IBSOPDATA2		0xc0011036
+#define MSR_AMD64_IBSOPDATA3		0xc0011037
+#define MSR_AMD64_IBSDCLINAD		0xc0011038
+#define MSR_AMD64_IBSDCPHYSAD		0xc0011039
+#define MSR_AMD64_IBSCTL		0xc001103a
+
+/* Fam 10h MSRs */
+#define MSR_FAM10H_MMIO_CONF_BASE	0xc0010058
+#define FAM10H_MMIO_CONF_ENABLE		(1<<0)
+#define FAM10H_MMIO_CONF_BUSRANGE_MASK	0xf
+#define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
+#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffff
+#define FAM10H_MMIO_CONF_BASE_SHIFT	20
+
+/* K8 MSRs */
+#define MSR_K8_TOP_MEM1			0xc001001a
+#define MSR_K8_TOP_MEM2			0xc001001d
+#define MSR_K8_SYSCFG			0xc0010010
+#define MSR_K8_HWCR			0xc0010015
+#define MSR_K8_INT_PENDING_MSG		0xc0010055
+/* C1E active bits in int pending message */
+#define K8_INTP_C1E_ACTIVE_MASK		0x18000000
+#define MSR_K8_TSEG_ADDR		0xc0010112
+#define K8_MTRRFIXRANGE_DRAM_ENABLE	0x00040000 /* MtrrFixDramEn bit    */
+#define K8_MTRRFIXRANGE_DRAM_MODIFY	0x00080000 /* MtrrFixDramModEn bit */
+#define K8_MTRR_RDMEM_WRMEM_MASK	0x18181818 /* Mask: RdMem|WrMem    */
+
+/* K7 MSRs */
+#define MSR_K7_EVNTSEL0			0xc0010000
+#define MSR_K7_PERFCTR0			0xc0010004
+#define MSR_K7_EVNTSEL1			0xc0010001
+#define MSR_K7_PERFCTR1			0xc0010005
+#define MSR_K7_EVNTSEL2			0xc0010002
+#define MSR_K7_PERFCTR2			0xc0010006
+#define MSR_K7_EVNTSEL3			0xc0010003
+#define MSR_K7_PERFCTR3			0xc0010007
+#define MSR_K7_CLK_CTL			0xc001001b
+#define MSR_K7_HWCR			0xc0010015
+#define MSR_K7_FID_VID_CTL		0xc0010041
+#define MSR_K7_FID_VID_STATUS		0xc0010042
+
+/* K6 MSRs */
+#define MSR_K6_EFER			0xc0000080
+#define MSR_K6_STAR			0xc0000081
+#define MSR_K6_WHCR			0xc0000082
+#define MSR_K6_UWCCR			0xc0000085
+#define MSR_K6_EPMR			0xc0000086
+#define MSR_K6_PSOR			0xc0000087
+#define MSR_K6_PFIR			0xc0000088
+
+/* Centaur-Hauls/IDT defined MSRs. */
+#define MSR_IDT_FCR1			0x00000107
+#define MSR_IDT_FCR2			0x00000108
+#define MSR_IDT_FCR3			0x00000109
+#define MSR_IDT_FCR4			0x0000010a
+
+#define MSR_IDT_MCR0			0x00000110
+#define MSR_IDT_MCR1			0x00000111
+#define MSR_IDT_MCR2			0x00000112
+#define MSR_IDT_MCR3			0x00000113
+#define MSR_IDT_MCR4			0x00000114
+#define MSR_IDT_MCR5			0x00000115
+#define MSR_IDT_MCR6			0x00000116
+#define MSR_IDT_MCR7			0x00000117
+#define MSR_IDT_MCR_CTRL		0x00000120
+
+/* VIA Cyrix defined MSRs*/
+#define MSR_VIA_FCR			0x00001107
+#define MSR_VIA_LONGHAUL		0x0000110a
+#define MSR_VIA_RNG			0x0000110b
+#define MSR_VIA_BCR2			0x00001147
+
+/* Transmeta defined MSRs */
+#define MSR_TMTA_LONGRUN_CTRL		0x80868010
+#define MSR_TMTA_LONGRUN_FLAGS		0x80868011
+#define MSR_TMTA_LRTI_READOUT		0x80868018
+#define MSR_TMTA_LRTI_VOLT_MHZ		0x8086801a
+
+/* Intel defined MSRs. */
+#define MSR_IA32_P5_MC_ADDR		0x00000000
+#define MSR_IA32_P5_MC_TYPE		0x00000001
+#define MSR_IA32_TSC			0x00000010
+#define MSR_IA32_PLATFORM_ID		0x00000017
+#define MSR_IA32_EBL_CR_POWERON		0x0000002a
+#define MSR_IA32_FEATURE_CONTROL        0x0000003a
+
+#define FEATURE_CONTROL_LOCKED		(1<<0)
+#define FEATURE_CONTROL_VMXON_ENABLED	(1<<2)
+
+#define MSR_IA32_APICBASE		0x0000001b
+#define MSR_IA32_APICBASE_BSP		(1<<8)
+#define MSR_IA32_APICBASE_ENABLE	(1<<11)
+#define MSR_IA32_APICBASE_BASE		(0xfffff<<12)
+
+#define MSR_IA32_UCODE_WRITE		0x00000079
+#define MSR_IA32_UCODE_REV		0x0000008b
+
+#define MSR_IA32_PERF_STATUS		0x00000198
+#define MSR_IA32_PERF_CTL		0x00000199
+
+#define MSR_IA32_MPERF			0x000000e7
+#define MSR_IA32_APERF			0x000000e8
+
+#define MSR_IA32_THERM_CONTROL		0x0000019a
+#define MSR_IA32_THERM_INTERRUPT	0x0000019b
+#define MSR_IA32_THERM_STATUS		0x0000019c
+#define MSR_IA32_MISC_ENABLE		0x000001a0
+
+/* Intel Model 6 */
+#define MSR_P6_EVNTSEL0			0x00000186
+#define MSR_P6_EVNTSEL1			0x00000187
+
+/* P4/Xeon+ specific */
+#define MSR_IA32_MCG_EAX		0x00000180
+#define MSR_IA32_MCG_EBX		0x00000181
+#define MSR_IA32_MCG_ECX		0x00000182
+#define MSR_IA32_MCG_EDX		0x00000183
+#define MSR_IA32_MCG_ESI		0x00000184
+#define MSR_IA32_MCG_EDI		0x00000185
+#define MSR_IA32_MCG_EBP		0x00000186
+#define MSR_IA32_MCG_ESP		0x00000187
+#define MSR_IA32_MCG_EFLAGS		0x00000188
+#define MSR_IA32_MCG_EIP		0x00000189
+#define MSR_IA32_MCG_RESERVED		0x0000018a
+
+/* Pentium IV performance counter MSRs */
+#define MSR_P4_BPU_PERFCTR0		0x00000300
+#define MSR_P4_BPU_PERFCTR1		0x00000301
+#define MSR_P4_BPU_PERFCTR2		0x00000302
+#define MSR_P4_BPU_PERFCTR3		0x00000303
+#define MSR_P4_MS_PERFCTR0		0x00000304
+#define MSR_P4_MS_PERFCTR1		0x00000305
+#define MSR_P4_MS_PERFCTR2		0x00000306
+#define MSR_P4_MS_PERFCTR3		0x00000307
+#define MSR_P4_FLAME_PERFCTR0		0x00000308
+#define MSR_P4_FLAME_PERFCTR1		0x00000309
+#define MSR_P4_FLAME_PERFCTR2		0x0000030a
+#define MSR_P4_FLAME_PERFCTR3		0x0000030b
+#define MSR_P4_IQ_PERFCTR0		0x0000030c
+#define MSR_P4_IQ_PERFCTR1		0x0000030d
+#define MSR_P4_IQ_PERFCTR2		0x0000030e
+#define MSR_P4_IQ_PERFCTR3		0x0000030f
+#define MSR_P4_IQ_PERFCTR4		0x00000310
+#define MSR_P4_IQ_PERFCTR5		0x00000311
+#define MSR_P4_BPU_CCCR0		0x00000360
+#define MSR_P4_BPU_CCCR1		0x00000361
+#define MSR_P4_BPU_CCCR2		0x00000362
+#define MSR_P4_BPU_CCCR3		0x00000363
+#define MSR_P4_MS_CCCR0			0x00000364
+#define MSR_P4_MS_CCCR1			0x00000365
+#define MSR_P4_MS_CCCR2			0x00000366
+#define MSR_P4_MS_CCCR3			0x00000367
+#define MSR_P4_FLAME_CCCR0		0x00000368
+#define MSR_P4_FLAME_CCCR1		0x00000369
+#define MSR_P4_FLAME_CCCR2		0x0000036a
+#define MSR_P4_FLAME_CCCR3		0x0000036b
+#define MSR_P4_IQ_CCCR0			0x0000036c
+#define MSR_P4_IQ_CCCR1			0x0000036d
+#define MSR_P4_IQ_CCCR2			0x0000036e
+#define MSR_P4_IQ_CCCR3			0x0000036f
+#define MSR_P4_IQ_CCCR4			0x00000370
+#define MSR_P4_IQ_CCCR5			0x00000371
+#define MSR_P4_ALF_ESCR0		0x000003ca
+#define MSR_P4_ALF_ESCR1		0x000003cb
+#define MSR_P4_BPU_ESCR0		0x000003b2
+#define MSR_P4_BPU_ESCR1		0x000003b3
+#define MSR_P4_BSU_ESCR0		0x000003a0
+#define MSR_P4_BSU_ESCR1		0x000003a1
+#define MSR_P4_CRU_ESCR0		0x000003b8
+#define MSR_P4_CRU_ESCR1		0x000003b9
+#define MSR_P4_CRU_ESCR2		0x000003cc
+#define MSR_P4_CRU_ESCR3		0x000003cd
+#define MSR_P4_CRU_ESCR4		0x000003e0
+#define MSR_P4_CRU_ESCR5		0x000003e1
+#define MSR_P4_DAC_ESCR0		0x000003a8
+#define MSR_P4_DAC_ESCR1		0x000003a9
+#define MSR_P4_FIRM_ESCR0		0x000003a4
+#define MSR_P4_FIRM_ESCR1		0x000003a5
+#define MSR_P4_FLAME_ESCR0		0x000003a6
+#define MSR_P4_FLAME_ESCR1		0x000003a7
+#define MSR_P4_FSB_ESCR0		0x000003a2
+#define MSR_P4_FSB_ESCR1		0x000003a3
+#define MSR_P4_IQ_ESCR0			0x000003ba
+#define MSR_P4_IQ_ESCR1			0x000003bb
+#define MSR_P4_IS_ESCR0			0x000003b4
+#define MSR_P4_IS_ESCR1			0x000003b5
+#define MSR_P4_ITLB_ESCR0		0x000003b6
+#define MSR_P4_ITLB_ESCR1		0x000003b7
+#define MSR_P4_IX_ESCR0			0x000003c8
+#define MSR_P4_IX_ESCR1			0x000003c9
+#define MSR_P4_MOB_ESCR0		0x000003aa
+#define MSR_P4_MOB_ESCR1		0x000003ab
+#define MSR_P4_MS_ESCR0			0x000003c0
+#define MSR_P4_MS_ESCR1			0x000003c1
+#define MSR_P4_PMH_ESCR0		0x000003ac
+#define MSR_P4_PMH_ESCR1		0x000003ad
+#define MSR_P4_RAT_ESCR0		0x000003bc
+#define MSR_P4_RAT_ESCR1		0x000003bd
+#define MSR_P4_SAAT_ESCR0		0x000003ae
+#define MSR_P4_SAAT_ESCR1		0x000003af
+#define MSR_P4_SSU_ESCR0		0x000003be
+#define MSR_P4_SSU_ESCR1		0x000003bf /* guess: not in manual */
+
+#define MSR_P4_TBPU_ESCR0		0x000003c2
+#define MSR_P4_TBPU_ESCR1		0x000003c3
+#define MSR_P4_TC_ESCR0			0x000003c4
+#define MSR_P4_TC_ESCR1			0x000003c5
+#define MSR_P4_U2L_ESCR0		0x000003b0
+#define MSR_P4_U2L_ESCR1		0x000003b1
+
+/* Intel Core-based CPU performance counters */
+#define MSR_CORE_PERF_FIXED_CTR0	0x00000309
+#define MSR_CORE_PERF_FIXED_CTR1	0x0000030a
+#define MSR_CORE_PERF_FIXED_CTR2	0x0000030b
+#define MSR_CORE_PERF_FIXED_CTR_CTRL	0x0000038d
+#define MSR_CORE_PERF_GLOBAL_STATUS	0x0000038e
+#define MSR_CORE_PERF_GLOBAL_CTRL	0x0000038f
+#define MSR_CORE_PERF_GLOBAL_OVF_CTRL	0x00000390
+
+/* Geode defined MSRs */
+#define MSR_GEODE_BUSCONT_CONF0		0x00001900
+
+/* Intel VT MSRs */
+#define MSR_IA32_VMX_BASIC              0x00000480
+#define MSR_IA32_VMX_PINBASED_CTLS      0x00000481
+#define MSR_IA32_VMX_PROCBASED_CTLS     0x00000482
+#define MSR_IA32_VMX_EXIT_CTLS          0x00000483
+#define MSR_IA32_VMX_ENTRY_CTLS         0x00000484
+#define MSR_IA32_VMX_MISC               0x00000485
+#define MSR_IA32_VMX_CR0_FIXED0         0x00000486
+#define MSR_IA32_VMX_CR0_FIXED1         0x00000487
+#define MSR_IA32_VMX_CR4_FIXED0         0x00000488
+#define MSR_IA32_VMX_CR4_FIXED1         0x00000489
+#define MSR_IA32_VMX_VMCS_ENUM          0x0000048a
+#define MSR_IA32_VMX_PROCBASED_CTLS2    0x0000048b
+#define MSR_IA32_VMX_EPT_VPID_CAP       0x0000048c
+
+#endif /* _ASM_X86_MSR_INDEX_H */
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
new file mode 100644
index 0000000..46be2fa
--- /dev/null
+++ b/arch/x86/include/asm/msr.h
@@ -0,0 +1,247 @@
+#ifndef _ASM_X86_MSR_H
+#define _ASM_X86_MSR_H
+
+#include <asm/msr-index.h>
+
+#ifndef __ASSEMBLY__
+# include <linux/types.h>
+#endif
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <asm/asm.h>
+#include <asm/errno.h>
+
+static inline unsigned long long native_read_tscp(unsigned int *aux)
+{
+	unsigned long low, high;
+	asm volatile(".byte 0x0f,0x01,0xf9"
+		     : "=a" (low), "=d" (high), "=c" (*aux));
+	return low | ((u64)high << 32);
+}
+
+/*
+ * i386 calling convention returns 64-bit value in edx:eax, while
+ * x86_64 returns at rax. Also, the "A" constraint does not really
+ * mean rdx:rax in x86_64, so we need specialized behaviour for each
+ * architecture
+ */
+#ifdef CONFIG_X86_64
+#define DECLARE_ARGS(val, low, high)	unsigned low, high
+#define EAX_EDX_VAL(val, low, high)	((low) | ((u64)(high) << 32))
+#define EAX_EDX_ARGS(val, low, high)	"a" (low), "d" (high)
+#define EAX_EDX_RET(val, low, high)	"=a" (low), "=d" (high)
+#else
+#define DECLARE_ARGS(val, low, high)	unsigned long long val
+#define EAX_EDX_VAL(val, low, high)	(val)
+#define EAX_EDX_ARGS(val, low, high)	"A" (val)
+#define EAX_EDX_RET(val, low, high)	"=A" (val)
+#endif
+
+static inline unsigned long long native_read_msr(unsigned int msr)
+{
+	DECLARE_ARGS(val, low, high);
+
+	asm volatile("rdmsr" : EAX_EDX_RET(val, low, high) : "c" (msr));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+static inline unsigned long long native_read_msr_safe(unsigned int msr,
+						      int *err)
+{
+	DECLARE_ARGS(val, low, high);
+
+	asm volatile("2: rdmsr ; xor %[err],%[err]\n"
+		     "1:\n\t"
+		     ".section .fixup,\"ax\"\n\t"
+		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
+		     ".previous\n\t"
+		     _ASM_EXTABLE(2b, 3b)
+		     : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
+		     : "c" (msr), [fault] "i" (-EFAULT));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+static inline unsigned long long native_read_msr_amd_safe(unsigned int msr,
+						      int *err)
+{
+	DECLARE_ARGS(val, low, high);
+
+	asm volatile("2: rdmsr ; xor %0,%0\n"
+		     "1:\n\t"
+		     ".section .fixup,\"ax\"\n\t"
+		     "3:  mov %3,%0 ; jmp 1b\n\t"
+		     ".previous\n\t"
+		     _ASM_EXTABLE(2b, 3b)
+		     : "=r" (*err), EAX_EDX_RET(val, low, high)
+		     : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+static inline void native_write_msr(unsigned int msr,
+				    unsigned low, unsigned high)
+{
+	asm volatile("wrmsr" : : "c" (msr), "a"(low), "d" (high) : "memory");
+}
+
+static inline int native_write_msr_safe(unsigned int msr,
+					unsigned low, unsigned high)
+{
+	int err;
+	asm volatile("2: wrmsr ; xor %[err],%[err]\n"
+		     "1:\n\t"
+		     ".section .fixup,\"ax\"\n\t"
+		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
+		     ".previous\n\t"
+		     _ASM_EXTABLE(2b, 3b)
+		     : [err] "=a" (err)
+		     : "c" (msr), "0" (low), "d" (high),
+		       [fault] "i" (-EFAULT)
+		     : "memory");
+	return err;
+}
+
+extern unsigned long long native_read_tsc(void);
+
+static __always_inline unsigned long long __native_read_tsc(void)
+{
+	DECLARE_ARGS(val, low, high);
+
+	rdtsc_barrier();
+	asm volatile("rdtsc" : EAX_EDX_RET(val, low, high));
+	rdtsc_barrier();
+
+	return EAX_EDX_VAL(val, low, high);
+}
+
+static inline unsigned long long native_read_pmc(int counter)
+{
+	DECLARE_ARGS(val, low, high);
+
+	asm volatile("rdpmc" : EAX_EDX_RET(val, low, high) : "c" (counter));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#include <linux/errno.h>
+/*
+ * Access to machine-specific registers (available on 586 and better only)
+ * Note: the rd* operations modify the parameters directly (without using
+ * pointer indirection), this allows gcc to optimize better
+ */
+
+#define rdmsr(msr, val1, val2)					\
+do {								\
+	u64 __val = native_read_msr((msr));			\
+	(val1) = (u32)__val;					\
+	(val2) = (u32)(__val >> 32);				\
+} while (0)
+
+static inline void wrmsr(unsigned msr, unsigned low, unsigned high)
+{
+	native_write_msr(msr, low, high);
+}
+
+#define rdmsrl(msr, val)			\
+	((val) = native_read_msr((msr)))
+
+#define wrmsrl(msr, val)						\
+	native_write_msr((msr), (u32)((u64)(val)), (u32)((u64)(val) >> 32))
+
+/* wrmsr with exception handling */
+static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high)
+{
+	return native_write_msr_safe(msr, low, high);
+}
+
+/* rdmsr with exception handling */
+#define rdmsr_safe(msr, p1, p2)					\
+({								\
+	int __err;						\
+	u64 __val = native_read_msr_safe((msr), &__err);	\
+	(*p1) = (u32)__val;					\
+	(*p2) = (u32)(__val >> 32);				\
+	__err;							\
+})
+
+static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
+{
+	int err;
+
+	*p = native_read_msr_safe(msr, &err);
+	return err;
+}
+static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
+{
+	int err;
+
+	*p = native_read_msr_amd_safe(msr, &err);
+	return err;
+}
+
+#define rdtscl(low)						\
+	((low) = (u32)native_read_tsc())
+
+#define rdtscll(val)						\
+	((val) = native_read_tsc())
+
+#define rdpmc(counter, low, high)			\
+do {							\
+	u64 _l = native_read_pmc((counter));		\
+	(low)  = (u32)_l;				\
+	(high) = (u32)(_l >> 32);			\
+} while (0)
+
+#define rdtscp(low, high, aux)					\
+do {                                                            \
+	unsigned long long _val = native_read_tscp(&(aux));     \
+	(low) = (u32)_val;                                      \
+	(high) = (u32)(_val >> 32);                             \
+} while (0)
+
+#define rdtscpll(val, aux) (val) = native_read_tscp(&(aux))
+
+#endif	/* !CONFIG_PARAVIRT */
+
+
+#define checking_wrmsrl(msr, val) wrmsr_safe((msr), (u32)(val),		\
+					     (u32)((val) >> 32))
+
+#define write_tsc(val1, val2) wrmsr(0x10, (val1), (val2))
+
+#define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0)
+
+#ifdef CONFIG_SMP
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+#else  /*  CONFIG_SMP  */
+static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+{
+	rdmsr(msr_no, *l, *h);
+	return 0;
+}
+static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	wrmsr(msr_no, l, h);
+	return 0;
+}
+static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
+				    u32 *l, u32 *h)
+{
+	return rdmsr_safe(msr_no, l, h);
+}
+static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	return wrmsr_safe(msr_no, l, h);
+}
+#endif  /* CONFIG_SMP */
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+
+#endif /* _ASM_X86_MSR_H */
diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
new file mode 100644
index 0000000..7c1e425
--- /dev/null
+++ b/arch/x86/include/asm/mtrr.h
@@ -0,0 +1,173 @@
+/*  Generic MTRR (Memory Type Range Register) ioctls.
+
+    Copyright (C) 1997-1999  Richard Gooch
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Library General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Library General Public License for more details.
+
+    You should have received a copy of the GNU Library General Public
+    License along with this library; if not, write to the Free
+    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Richard Gooch may be reached by email at  rgooch@atnf.csiro.au
+    The postal address is:
+      Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+*/
+#ifndef _ASM_X86_MTRR_H
+#define _ASM_X86_MTRR_H
+
+#include <linux/ioctl.h>
+#include <linux/errno.h>
+
+#define	MTRR_IOCTL_BASE	'M'
+
+struct mtrr_sentry {
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int type;     /*  Type of region   */
+};
+
+/* Warning: this structure has a different order from i386
+   on x86-64. The 32bit emulation code takes care of that.
+   But you need to use this for 64bit, otherwise your X server
+   will break. */
+
+#ifdef __i386__
+struct mtrr_gentry {
+    unsigned int regnum;   /*  Register number  */
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int type;     /*  Type of region   */
+};
+
+#else /* __i386__ */
+
+struct mtrr_gentry {
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int regnum;   /*  Register number  */
+    unsigned int type;     /*  Type of region   */
+};
+#endif /* !__i386__ */
+
+/*  These are the various ioctls  */
+#define MTRRIOC_ADD_ENTRY        _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry)
+#define MTRRIOC_SET_ENTRY        _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry)
+#define MTRRIOC_DEL_ENTRY        _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry)
+#define MTRRIOC_GET_ENTRY        _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry)
+#define MTRRIOC_KILL_ENTRY       _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry)
+#define MTRRIOC_ADD_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry)
+#define MTRRIOC_SET_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry)
+#define MTRRIOC_DEL_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry)
+#define MTRRIOC_GET_PAGE_ENTRY   _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
+#define MTRRIOC_KILL_PAGE_ENTRY  _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry)
+
+/*  These are the region types  */
+#define MTRR_TYPE_UNCACHABLE 0
+#define MTRR_TYPE_WRCOMB     1
+/*#define MTRR_TYPE_         2*/
+/*#define MTRR_TYPE_         3*/
+#define MTRR_TYPE_WRTHROUGH  4
+#define MTRR_TYPE_WRPROT     5
+#define MTRR_TYPE_WRBACK     6
+#define MTRR_NUM_TYPES       7
+
+#ifdef __KERNEL__
+
+/*  The following functions are for use by other drivers  */
+# ifdef CONFIG_MTRR
+extern u8 mtrr_type_lookup(u64 addr, u64 end);
+extern void mtrr_save_fixed_ranges(void *);
+extern void mtrr_save_state(void);
+extern int mtrr_add(unsigned long base, unsigned long size,
+		    unsigned int type, bool increment);
+extern int mtrr_add_page(unsigned long base, unsigned long size,
+			 unsigned int type, bool increment);
+extern int mtrr_del(int reg, unsigned long base, unsigned long size);
+extern int mtrr_del_page(int reg, unsigned long base, unsigned long size);
+extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
+extern void mtrr_ap_init(void);
+extern void mtrr_bp_init(void);
+extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
+extern int amd_special_default_mtrr(void);
+#  else
+static inline u8 mtrr_type_lookup(u64 addr, u64 end)
+{
+	/*
+	 * Return no-MTRRs:
+	 */
+	return 0xff;
+}
+#define mtrr_save_fixed_ranges(arg) do {} while (0)
+#define mtrr_save_state() do {} while (0)
+static inline int mtrr_add(unsigned long base, unsigned long size,
+			   unsigned int type, bool increment)
+{
+    return -ENODEV;
+}
+static inline int mtrr_add_page(unsigned long base, unsigned long size,
+				unsigned int type, bool increment)
+{
+    return -ENODEV;
+}
+static inline int mtrr_del(int reg, unsigned long base, unsigned long size)
+{
+    return -ENODEV;
+}
+static inline int mtrr_del_page(int reg, unsigned long base, unsigned long size)
+{
+    return -ENODEV;
+}
+static inline int mtrr_trim_uncached_memory(unsigned long end_pfn)
+{
+	return 0;
+}
+static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
+{
+}
+
+#define mtrr_ap_init() do {} while (0)
+#define mtrr_bp_init() do {} while (0)
+#  endif
+
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+
+struct mtrr_sentry32 {
+    compat_ulong_t base;    /*  Base address     */
+    compat_uint_t size;    /*  Size of region   */
+    compat_uint_t type;     /*  Type of region   */
+};
+
+struct mtrr_gentry32 {
+    compat_ulong_t regnum;   /*  Register number  */
+    compat_uint_t base;    /*  Base address     */
+    compat_uint_t size;    /*  Size of region   */
+    compat_uint_t type;     /*  Type of region   */
+};
+
+#define MTRR_IOCTL_BASE 'M'
+
+#define MTRRIOC32_ADD_ENTRY      _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry32)
+#define MTRRIOC32_SET_ENTRY      _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry32)
+#define MTRRIOC32_DEL_ENTRY      _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry32)
+#define MTRRIOC32_GET_ENTRY      _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32)
+#define MTRRIOC32_KILL_ENTRY     _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry32)
+#define MTRRIOC32_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry32)
+#define MTRRIOC32_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry32)
+#define MTRRIOC32_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry32)
+#define MTRRIOC32_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32)
+#define MTRRIOC32_KILL_PAGE_ENTRY		\
+				 _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry32)
+#endif /* CONFIG_COMPAT */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_MTRR_H */
diff --git a/arch/x86/include/asm/mutex.h b/arch/x86/include/asm/mutex.h
new file mode 100644
index 0000000..a731b9c
--- /dev/null
+++ b/arch/x86/include/asm/mutex.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "mutex_32.h"
+#else
+# include "mutex_64.h"
+#endif
diff --git a/arch/x86/include/asm/mutex_32.h b/arch/x86/include/asm/mutex_32.h
new file mode 100644
index 0000000..03f90c8
--- /dev/null
+++ b/arch/x86/include/asm/mutex_32.h
@@ -0,0 +1,125 @@
+/*
+ * Assembly implementation of the mutex fastpath, based on atomic
+ * decrement/increment.
+ *
+ * started by Ingo Molnar:
+ *
+ *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ */
+#ifndef _ASM_X86_MUTEX_32_H
+#define _ASM_X86_MUTEX_32_H
+
+#include <asm/alternative.h>
+
+/**
+ *  __mutex_fastpath_lock - try to take the lock by moving the count
+ *                          from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fn> if it
+ * wasn't 1 originally. This function MUST leave the value lower than 1
+ * even when the "1" assertion wasn't true.
+ */
+#define __mutex_fastpath_lock(count, fail_fn)			\
+do {								\
+	unsigned int dummy;					\
+								\
+	typecheck(atomic_t *, count);				\
+	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
+								\
+	asm volatile(LOCK_PREFIX "   decl (%%eax)\n"		\
+		     "   jns 1f	\n"				\
+		     "   call " #fail_fn "\n"			\
+		     "1:\n"					\
+		     : "=a" (dummy)				\
+		     : "a" (count)				\
+		     : "memory", "ecx", "edx");			\
+} while (0)
+
+
+/**
+ *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
+ *                                 from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if it
+ * wasn't 1 originally. This function returns 0 if the fastpath succeeds,
+ * or anything the slow path function returns
+ */
+static inline int __mutex_fastpath_lock_retval(atomic_t *count,
+					       int (*fail_fn)(atomic_t *))
+{
+	if (unlikely(atomic_dec_return(count) < 0))
+		return fail_fn(count);
+	else
+		return 0;
+}
+
+/**
+ *  __mutex_fastpath_unlock - try to promote the mutex from 0 to 1
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 0
+ *
+ * try to promote the mutex from 0 to 1. if it wasn't 0, call <fail_fn>.
+ * In the failure case, this function is allowed to either set the value
+ * to 1, or to set it to a value lower than 1.
+ *
+ * If the implementation sets it to a value of lower than 1, the
+ * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
+ * to return 0 otherwise.
+ */
+#define __mutex_fastpath_unlock(count, fail_fn)			\
+do {								\
+	unsigned int dummy;					\
+								\
+	typecheck(atomic_t *, count);				\
+	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
+								\
+	asm volatile(LOCK_PREFIX "   incl (%%eax)\n"		\
+		     "   jg	1f\n"				\
+		     "   call " #fail_fn "\n"			\
+		     "1:\n"					\
+		     : "=a" (dummy)				\
+		     : "a" (count)				\
+		     : "memory", "ecx", "edx");			\
+} while (0)
+
+#define __mutex_slowpath_needs_to_unlock()	1
+
+/**
+ * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
+ *
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: fallback function
+ *
+ * Change the count from 1 to a value lower than 1, and return 0 (failure)
+ * if it wasn't 1 originally, or return 1 (success) otherwise. This function
+ * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
+ * Additionally, if the value was < 0 originally, this function must not leave
+ * it to 0 on failure.
+ */
+static inline int __mutex_fastpath_trylock(atomic_t *count,
+					   int (*fail_fn)(atomic_t *))
+{
+	/*
+	 * We have two variants here. The cmpxchg based one is the best one
+	 * because it never induce a false contention state.  It is included
+	 * here because architectures using the inc/dec algorithms over the
+	 * xchg ones are much more likely to support cmpxchg natively.
+	 *
+	 * If not we fall back to the spinlock based variant - that is
+	 * just as efficient (and simpler) as a 'destructive' probing of
+	 * the mutex state would be.
+	 */
+#ifdef __HAVE_ARCH_CMPXCHG
+	if (likely(atomic_cmpxchg(count, 1, 0) == 1))
+		return 1;
+	return 0;
+#else
+	return fail_fn(count);
+#endif
+}
+
+#endif /* _ASM_X86_MUTEX_32_H */
diff --git a/arch/x86/include/asm/mutex_64.h b/arch/x86/include/asm/mutex_64.h
new file mode 100644
index 0000000..68a87b0
--- /dev/null
+++ b/arch/x86/include/asm/mutex_64.h
@@ -0,0 +1,100 @@
+/*
+ * Assembly implementation of the mutex fastpath, based on atomic
+ * decrement/increment.
+ *
+ * started by Ingo Molnar:
+ *
+ *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ */
+#ifndef _ASM_X86_MUTEX_64_H
+#define _ASM_X86_MUTEX_64_H
+
+/**
+ * __mutex_fastpath_lock - decrement and call function if negative
+ * @v: pointer of type atomic_t
+ * @fail_fn: function to call if the result is negative
+ *
+ * Atomically decrements @v and calls <fail_fn> if the result is negative.
+ */
+#define __mutex_fastpath_lock(v, fail_fn)			\
+do {								\
+	unsigned long dummy;					\
+								\
+	typecheck(atomic_t *, v);				\
+	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
+								\
+	asm volatile(LOCK_PREFIX "   decl (%%rdi)\n"		\
+		     "   jns 1f		\n"			\
+		     "   call " #fail_fn "\n"			\
+		     "1:"					\
+		     : "=D" (dummy)				\
+		     : "D" (v)					\
+		     : "rax", "rsi", "rdx", "rcx",		\
+		       "r8", "r9", "r10", "r11", "memory");	\
+} while (0)
+
+/**
+ *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
+ *                                 from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if
+ * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
+ * or anything the slow path function returns
+ */
+static inline int __mutex_fastpath_lock_retval(atomic_t *count,
+					       int (*fail_fn)(atomic_t *))
+{
+	if (unlikely(atomic_dec_return(count) < 0))
+		return fail_fn(count);
+	else
+		return 0;
+}
+
+/**
+ * __mutex_fastpath_unlock - increment and call function if nonpositive
+ * @v: pointer of type atomic_t
+ * @fail_fn: function to call if the result is nonpositive
+ *
+ * Atomically increments @v and calls <fail_fn> if the result is nonpositive.
+ */
+#define __mutex_fastpath_unlock(v, fail_fn)			\
+do {								\
+	unsigned long dummy;					\
+								\
+	typecheck(atomic_t *, v);				\
+	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
+								\
+	asm volatile(LOCK_PREFIX "   incl (%%rdi)\n"		\
+		     "   jg 1f\n"				\
+		     "   call " #fail_fn "\n"			\
+		     "1:"					\
+		     : "=D" (dummy)				\
+		     : "D" (v)					\
+		     : "rax", "rsi", "rdx", "rcx",		\
+		       "r8", "r9", "r10", "r11", "memory");	\
+} while (0)
+
+#define __mutex_slowpath_needs_to_unlock()	1
+
+/**
+ * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
+ *
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: fallback function
+ *
+ * Change the count from 1 to 0 and return 1 (success), or return 0 (failure)
+ * if it wasn't 1 originally. [the fallback function is never used on
+ * x86_64, because all x86_64 CPUs have a CMPXCHG instruction.]
+ */
+static inline int __mutex_fastpath_trylock(atomic_t *count,
+					   int (*fail_fn)(atomic_t *))
+{
+	if (likely(atomic_cmpxchg(count, 1, 0) == 1))
+		return 1;
+	else
+		return 0;
+}
+
+#endif /* _ASM_X86_MUTEX_64_H */
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
new file mode 100644
index 0000000..c45a0a5
--- /dev/null
+++ b/arch/x86/include/asm/nmi.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_X86_NMI_H
+#define _ASM_X86_NMI_H
+
+#include <linux/pm.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#ifdef ARCH_HAS_NMI_WATCHDOG
+
+/**
+ * do_nmi_callback
+ *
+ * Check to see if a callback exists and execute it.  Return 1
+ * if the handler exists and was handled successfully.
+ */
+int do_nmi_callback(struct pt_regs *regs, int cpu);
+
+extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
+extern int check_nmi_watchdog(void);
+extern int nmi_watchdog_enabled;
+extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
+extern int avail_to_resrv_perfctr_nmi(unsigned int);
+extern int reserve_perfctr_nmi(unsigned int);
+extern void release_perfctr_nmi(unsigned int);
+extern int reserve_evntsel_nmi(unsigned int);
+extern void release_evntsel_nmi(unsigned int);
+
+extern void setup_apic_nmi_watchdog(void *);
+extern void stop_apic_nmi_watchdog(void *);
+extern void disable_timer_nmi_watchdog(void);
+extern void enable_timer_nmi_watchdog(void);
+extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
+extern void cpu_nmi_set_wd_enabled(void);
+
+extern atomic_t nmi_active;
+extern unsigned int nmi_watchdog;
+#define NMI_NONE	0
+#define NMI_IO_APIC	1
+#define NMI_LOCAL_APIC	2
+#define NMI_INVALID	3
+
+struct ctl_table;
+struct file;
+extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
+			void __user *, size_t *, loff_t *);
+extern int unknown_nmi_panic;
+
+void __trigger_all_cpu_backtrace(void);
+#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+
+static inline void localise_nmi_watchdog(void)
+{
+	if (nmi_watchdog == NMI_IO_APIC)
+		nmi_watchdog = NMI_LOCAL_APIC;
+}
+
+/* check if nmi_watchdog is active (ie was specified at boot) */
+static inline int nmi_watchdog_active(void)
+{
+	/*
+	 * actually it should be:
+	 * 	return (nmi_watchdog == NMI_LOCAL_APIC ||
+	 * 		nmi_watchdog == NMI_IO_APIC)
+	 * but since they are power of two we could use a
+	 * cheaper way --cvg
+	 */
+	return nmi_watchdog & 0x3;
+}
+#endif
+
+void lapic_watchdog_stop(void);
+int lapic_watchdog_init(unsigned nmi_hz);
+int lapic_wd_event(unsigned nmi_hz);
+unsigned lapic_adjust_nmi_hz(unsigned hz);
+int lapic_watchdog_ok(void);
+void disable_lapic_nmi_watchdog(void);
+void enable_lapic_nmi_watchdog(void);
+void stop_nmi(void);
+void restart_nmi(void);
+
+#endif /* _ASM_X86_NMI_H */
diff --git a/arch/x86/include/asm/nops.h b/arch/x86/include/asm/nops.h
new file mode 100644
index 0000000..ad2668e
--- /dev/null
+++ b/arch/x86/include/asm/nops.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_X86_NOPS_H
+#define _ASM_X86_NOPS_H
+
+/* Define nops for use with alternative() */
+
+/* generic versions from gas
+   1: nop
+   the following instructions are NOT nops in 64-bit mode,
+   for 64-bit mode use K8 or P6 nops instead
+   2: movl %esi,%esi
+   3: leal 0x00(%esi),%esi
+   4: leal 0x00(,%esi,1),%esi
+   6: leal 0x00000000(%esi),%esi
+   7: leal 0x00000000(,%esi,1),%esi
+*/
+#define GENERIC_NOP1 ".byte 0x90\n"
+#define GENERIC_NOP2 ".byte 0x89,0xf6\n"
+#define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n"
+#define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n"
+#define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4
+#define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n"
+#define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n"
+#define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7
+
+/* Opteron 64bit nops
+   1: nop
+   2: osp nop
+   3: osp osp nop
+   4: osp osp osp nop
+*/
+#define K8_NOP1 GENERIC_NOP1
+#define K8_NOP2	".byte 0x66,0x90\n"
+#define K8_NOP3	".byte 0x66,0x66,0x90\n"
+#define K8_NOP4	".byte 0x66,0x66,0x66,0x90\n"
+#define K8_NOP5	K8_NOP3 K8_NOP2
+#define K8_NOP6	K8_NOP3 K8_NOP3
+#define K8_NOP7	K8_NOP4 K8_NOP3
+#define K8_NOP8	K8_NOP4 K8_NOP4
+
+/* K7 nops
+   uses eax dependencies (arbitary choice)
+   1: nop
+   2: movl %eax,%eax
+   3: leal (,%eax,1),%eax
+   4: leal 0x00(,%eax,1),%eax
+   6: leal 0x00000000(%eax),%eax
+   7: leal 0x00000000(,%eax,1),%eax
+*/
+#define K7_NOP1	GENERIC_NOP1
+#define K7_NOP2	".byte 0x8b,0xc0\n"
+#define K7_NOP3	".byte 0x8d,0x04,0x20\n"
+#define K7_NOP4	".byte 0x8d,0x44,0x20,0x00\n"
+#define K7_NOP5	K7_NOP4 ASM_NOP1
+#define K7_NOP6	".byte 0x8d,0x80,0,0,0,0\n"
+#define K7_NOP7	".byte 0x8D,0x04,0x05,0,0,0,0\n"
+#define K7_NOP8	K7_NOP7 ASM_NOP1
+
+/* P6 nops
+   uses eax dependencies (Intel-recommended choice)
+   1: nop
+   2: osp nop
+   3: nopl (%eax)
+   4: nopl 0x00(%eax)
+   5: nopl 0x00(%eax,%eax,1)
+   6: osp nopl 0x00(%eax,%eax,1)
+   7: nopl 0x00000000(%eax)
+   8: nopl 0x00000000(%eax,%eax,1)
+*/
+#define P6_NOP1	GENERIC_NOP1
+#define P6_NOP2	".byte 0x66,0x90\n"
+#define P6_NOP3	".byte 0x0f,0x1f,0x00\n"
+#define P6_NOP4	".byte 0x0f,0x1f,0x40,0\n"
+#define P6_NOP5	".byte 0x0f,0x1f,0x44,0x00,0\n"
+#define P6_NOP6	".byte 0x66,0x0f,0x1f,0x44,0x00,0\n"
+#define P6_NOP7	".byte 0x0f,0x1f,0x80,0,0,0,0\n"
+#define P6_NOP8	".byte 0x0f,0x1f,0x84,0x00,0,0,0,0\n"
+
+#if defined(CONFIG_MK7)
+#define ASM_NOP1 K7_NOP1
+#define ASM_NOP2 K7_NOP2
+#define ASM_NOP3 K7_NOP3
+#define ASM_NOP4 K7_NOP4
+#define ASM_NOP5 K7_NOP5
+#define ASM_NOP6 K7_NOP6
+#define ASM_NOP7 K7_NOP7
+#define ASM_NOP8 K7_NOP8
+#elif defined(CONFIG_X86_P6_NOP)
+#define ASM_NOP1 P6_NOP1
+#define ASM_NOP2 P6_NOP2
+#define ASM_NOP3 P6_NOP3
+#define ASM_NOP4 P6_NOP4
+#define ASM_NOP5 P6_NOP5
+#define ASM_NOP6 P6_NOP6
+#define ASM_NOP7 P6_NOP7
+#define ASM_NOP8 P6_NOP8
+#elif defined(CONFIG_X86_64)
+#define ASM_NOP1 K8_NOP1
+#define ASM_NOP2 K8_NOP2
+#define ASM_NOP3 K8_NOP3
+#define ASM_NOP4 K8_NOP4
+#define ASM_NOP5 K8_NOP5
+#define ASM_NOP6 K8_NOP6
+#define ASM_NOP7 K8_NOP7
+#define ASM_NOP8 K8_NOP8
+#else
+#define ASM_NOP1 GENERIC_NOP1
+#define ASM_NOP2 GENERIC_NOP2
+#define ASM_NOP3 GENERIC_NOP3
+#define ASM_NOP4 GENERIC_NOP4
+#define ASM_NOP5 GENERIC_NOP5
+#define ASM_NOP6 GENERIC_NOP6
+#define ASM_NOP7 GENERIC_NOP7
+#define ASM_NOP8 GENERIC_NOP8
+#endif
+
+#define ASM_NOP_MAX 8
+
+#endif /* _ASM_X86_NOPS_H */
diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
new file mode 100644
index 0000000..27da400
--- /dev/null
+++ b/arch/x86/include/asm/numa.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "numa_32.h"
+#else
+# include "numa_64.h"
+#endif
diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h
new file mode 100644
index 0000000..e9f5db7
--- /dev/null
+++ b/arch/x86/include/asm/numa_32.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_X86_NUMA_32_H
+#define _ASM_X86_NUMA_32_H
+
+extern int pxm_to_nid(int pxm);
+extern void numa_remove_cpu(int cpu);
+
+#ifdef CONFIG_NUMA
+extern void set_highmem_pages_init(void);
+#endif
+
+#endif /* _ASM_X86_NUMA_32_H */
diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h
new file mode 100644
index 0000000..064ed6d
--- /dev/null
+++ b/arch/x86/include/asm/numa_64.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_X86_NUMA_64_H
+#define _ASM_X86_NUMA_64_H
+
+#include <linux/nodemask.h>
+#include <asm/apicdef.h>
+
+struct bootnode {
+	u64 start;
+	u64 end;
+};
+
+extern int compute_hash_shift(struct bootnode *nodes, int numblks,
+			      int *nodeids);
+
+#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
+
+extern void numa_init_array(void);
+extern int numa_off;
+
+extern void srat_reserve_add_area(int nodeid);
+extern int hotadd_percent;
+
+extern s16 apicid_to_node[MAX_LOCAL_APIC];
+
+extern unsigned long numa_free_all_bootmem(void);
+extern void setup_node_bootmem(int nodeid, unsigned long start,
+			       unsigned long end);
+
+#ifdef CONFIG_NUMA
+extern void __init init_cpu_to_node(void);
+extern void __cpuinit numa_set_node(int cpu, int node);
+extern void __cpuinit numa_clear_node(int cpu);
+extern void __cpuinit numa_add_cpu(int cpu);
+extern void __cpuinit numa_remove_cpu(int cpu);
+#else
+static inline void init_cpu_to_node(void)		{ }
+static inline void numa_set_node(int cpu, int node)	{ }
+static inline void numa_clear_node(int cpu)		{ }
+static inline void numa_add_cpu(int cpu, int node)	{ }
+static inline void numa_remove_cpu(int cpu)		{ }
+#endif
+
+#endif /* _ASM_X86_NUMA_64_H */
diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h
new file mode 100644
index 0000000..1e8bd30
--- /dev/null
+++ b/arch/x86/include/asm/numaq.h
@@ -0,0 +1,169 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+
+#ifndef _ASM_X86_NUMAQ_H
+#define _ASM_X86_NUMAQ_H
+
+#ifdef CONFIG_X86_NUMAQ
+
+extern int found_numaq;
+extern int get_memcfg_numaq(void);
+
+/*
+ * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
+ */
+#define SYS_CFG_DATA_PRIV_ADDR		0x0009d000 /* place for scd in private
+						      quad space */
+
+/*
+ * Communication area for each processor on lynxer-processor tests.
+ *
+ * NOTE: If you change the size of this eachproc structure you need
+ *       to change the definition for EACH_QUAD_SIZE.
+ */
+struct eachquadmem {
+	unsigned int	priv_mem_start;		/* Starting address of this */
+						/* quad's private memory. */
+						/* This is always 0. */
+						/* In MB. */
+	unsigned int	priv_mem_size;		/* Size of this quad's */
+						/* private memory. */
+						/* In MB. */
+	unsigned int	low_shrd_mem_strp_start;/* Starting address of this */
+						/* quad's low shared block */
+						/* (untranslated). */
+						/* In MB. */
+	unsigned int	low_shrd_mem_start;	/* Starting address of this */
+						/* quad's low shared memory */
+						/* (untranslated). */
+						/* In MB. */
+	unsigned int	low_shrd_mem_size;	/* Size of this quad's low */
+						/* shared memory. */
+						/* In MB. */
+	unsigned int	lmmio_copb_start;	/* Starting address of this */
+						/* quad's local memory */
+						/* mapped I/O in the */
+						/* compatibility OPB. */
+						/* In MB. */
+	unsigned int	lmmio_copb_size;	/* Size of this quad's local */
+						/* memory mapped I/O in the */
+						/* compatibility OPB. */
+						/* In MB. */
+	unsigned int	lmmio_nopb_start;	/* Starting address of this */
+						/* quad's local memory */
+						/* mapped I/O in the */
+						/* non-compatibility OPB. */
+						/* In MB. */
+	unsigned int	lmmio_nopb_size;	/* Size of this quad's local */
+						/* memory mapped I/O in the */
+						/* non-compatibility OPB. */
+						/* In MB. */
+	unsigned int	io_apic_0_start;	/* Starting address of I/O */
+						/* APIC 0. */
+	unsigned int	io_apic_0_sz;		/* Size I/O APIC 0. */
+	unsigned int	io_apic_1_start;	/* Starting address of I/O */
+						/* APIC 1. */
+	unsigned int	io_apic_1_sz;		/* Size I/O APIC 1. */
+	unsigned int	hi_shrd_mem_start;	/* Starting address of this */
+						/* quad's high shared memory.*/
+						/* In MB. */
+	unsigned int	hi_shrd_mem_size;	/* Size of this quad's high */
+						/* shared memory. */
+						/* In MB. */
+	unsigned int	mps_table_addr;		/* Address of this quad's */
+						/* MPS tables from BIOS, */
+						/* in system space.*/
+	unsigned int	lcl_MDC_pio_addr;	/* Port-I/O address for */
+						/* local access of MDC. */
+	unsigned int	rmt_MDC_mmpio_addr;	/* MM-Port-I/O address for */
+						/* remote access of MDC. */
+	unsigned int	mm_port_io_start;	/* Starting address of this */
+						/* quad's memory mapped Port */
+						/* I/O space. */
+	unsigned int	mm_port_io_size;	/* Size of this quad's memory*/
+						/* mapped Port I/O space. */
+	unsigned int	mm_rmt_io_apic_start;	/* Starting address of this */
+						/* quad's memory mapped */
+						/* remote I/O APIC space. */
+	unsigned int	mm_rmt_io_apic_size;	/* Size of this quad's memory*/
+						/* mapped remote I/O APIC */
+						/* space. */
+	unsigned int	mm_isa_start;		/* Starting address of this */
+						/* quad's memory mapped ISA */
+						/* space (contains MDC */
+						/* memory space). */
+	unsigned int	mm_isa_size;		/* Size of this quad's memory*/
+						/* mapped ISA space (contains*/
+						/* MDC memory space). */
+	unsigned int	rmt_qmi_addr;		/* Remote addr to access QMI.*/
+	unsigned int	lcl_qmi_addr;		/* Local addr to access QMI. */
+};
+
+/*
+ * Note: This structure must be NOT be changed unless the multiproc and
+ * OS are changed to reflect the new structure.
+ */
+struct sys_cfg_data {
+	unsigned int	quad_id;
+	unsigned int	bsp_proc_id; /* Boot Strap Processor in this quad. */
+	unsigned int	scd_version; /* Version number of this table. */
+	unsigned int	first_quad_id;
+	unsigned int	quads_present31_0; /* 1 bit for each quad */
+	unsigned int	quads_present63_32; /* 1 bit for each quad */
+	unsigned int	config_flags;
+	unsigned int	boot_flags;
+	unsigned int	csr_start_addr; /* Absolute value (not in MB) */
+	unsigned int	csr_size; /* Absolute value (not in MB) */
+	unsigned int	lcl_apic_start_addr; /* Absolute value (not in MB) */
+	unsigned int	lcl_apic_size; /* Absolute value (not in MB) */
+	unsigned int	low_shrd_mem_base; /* 0 or 512MB or 1GB */
+	unsigned int	low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
+					/* may not be totally populated */
+	unsigned int	split_mem_enbl; /* 0 for no low shared memory */
+	unsigned int	mmio_sz; /* Size of total system memory mapped I/O */
+				 /* (in MB). */
+	unsigned int	quad_spin_lock; /* Spare location used for quad */
+					/* bringup. */
+	unsigned int	nonzero55; /* For checksumming. */
+	unsigned int	nonzeroaa; /* For checksumming. */
+	unsigned int	scd_magic_number;
+	unsigned int	system_type;
+	unsigned int	checksum;
+	/*
+	 *	memory configuration area for each quad
+	 */
+	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
+};
+
+void numaq_tsc_disable(void);
+
+#else
+static inline int get_memcfg_numaq(void)
+{
+	return 0;
+}
+#endif /* CONFIG_X86_NUMAQ */
+#endif /* _ASM_X86_NUMAQ_H */
+
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
new file mode 100644
index 0000000..0bf2a06
--- /dev/null
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -0,0 +1,136 @@
+#ifndef __ASM_NUMAQ_APIC_H
+#define __ASM_NUMAQ_APIC_H
+
+#include <asm/io.h>
+#include <linux/mmzone.h>
+#include <linux/nodemask.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline cpumask_t target_cpus(void)
+{
+	return CPU_MASK_ALL;
+}
+
+#define NO_BALANCE_IRQ (1)
+#define esr_disable (1)
+
+#define INT_DELIVERY_MODE dest_LowestPrio
+#define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
+ 
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline int apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void init_apic_ldr(void)
+{
+	/* Already done in NUMA-Q firmware */
+}
+
+static inline void setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		"NUMA-Q", nr_ioapics);
+}
+
+/*
+ * Skip adding the timer int on secondary nodes, which causes
+ * a small but painful rift in the time-space continuum.
+ */
+static inline int multi_timer_check(int apic, int irq)
+{
+	return apic != 0 && irq == 0;
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* We don't have a good way to do this yet - hack */
+	return physids_promote(0xFUL);
+}
+
+/* Mapping from cpu number to logical apicid */
+extern u8 cpu_2_logical_apicid[];
+static inline int cpu_to_logical_apicid(int cpu)
+{
+       if (cpu >= NR_CPUS)
+	       return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+}
+
+/*
+ * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
+ * cpu to APIC ID relation to properly interact with the intelligent
+ * mode of the cluster controller.
+ */
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < 60)
+		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
+	else
+		return BAD_APICID;
+}
+
+static inline int apicid_to_node(int logical_apicid) 
+{
+	return logical_apicid >> 4;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
+{
+	int node = apicid_to_node(logical_apicid);
+	int cpu = __ffs(logical_apicid & 0xf);
+
+	return physid_mask_of_physid(cpu + 4*node);
+}
+
+extern void *xquad_portio;
+
+static inline void setup_portio_remap(void)
+{
+	int num_quads = num_online_nodes();
+
+	if (num_quads <= 1)
+       		return;
+
+	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
+	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
+	printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
+		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return (1);
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+/*
+ * We use physical apicids here, not logical, so just return the default
+ * physical broadcast to stop people from breaking us
+ */
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	return (int) 0xF;
+}
+
+/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_NUMAQ_APIC_H */
diff --git a/arch/x86/include/asm/numaq/apicdef.h b/arch/x86/include/asm/numaq/apicdef.h
new file mode 100644
index 0000000..e012a46
--- /dev/null
+++ b/arch/x86/include/asm/numaq/apicdef.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_NUMAQ_APICDEF_H
+#define __ASM_NUMAQ_APICDEF_H
+
+
+#define APIC_ID_MASK (0xF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+	        return (((x)>>24)&0x0F);
+}
+
+#define         GET_APIC_ID(x)  get_apic_id(x)
+
+#endif
diff --git a/arch/x86/include/asm/numaq/ipi.h b/arch/x86/include/asm/numaq/ipi.h
new file mode 100644
index 0000000..935588d2
--- /dev/null
+++ b/arch/x86/include/asm/numaq/ipi.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_NUMAQ_IPI_H
+#define __ASM_NUMAQ_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_NUMAQ_IPI_H */
diff --git a/arch/x86/include/asm/numaq/mpparse.h b/arch/x86/include/asm/numaq/mpparse.h
new file mode 100644
index 0000000..252292e
--- /dev/null
+++ b/arch/x86/include/asm/numaq/mpparse.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_NUMAQ_MPPARSE_H
+#define __ASM_NUMAQ_MPPARSE_H
+
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
+
+#endif /* __ASM_NUMAQ_MPPARSE_H */
diff --git a/arch/x86/include/asm/numaq/wakecpu.h b/arch/x86/include/asm/numaq/wakecpu.h
new file mode 100644
index 0000000..c577bda
--- /dev/null
+++ b/arch/x86/include/asm/numaq/wakecpu.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_NUMAQ_WAKECPU_H
+#define __ASM_NUMAQ_WAKECPU_H
+
+/* This file copes with machines that wakeup secondary CPUs by NMIs */
+
+#define WAKE_SECONDARY_VIA_NMI
+
+#define TRAMPOLINE_LOW phys_to_virt(0x8)
+#define TRAMPOLINE_HIGH phys_to_virt(0xa)
+
+#define boot_cpu_apicid boot_cpu_logical_apicid
+
+/* We don't do anything here because we use NMI's to boot instead */
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+}
+
+/*
+ * Because we use NMIs rather than the INIT-STARTUP sequence to
+ * bootstrap the CPUs, the APIC may be in a weird state. Kick it.
+ */
+static inline void smp_callin_clear_local_apic(void)
+{
+	clear_local_APIC();
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+	printk("Storing NMI vector\n");
+	*high = *((volatile unsigned short *) TRAMPOLINE_HIGH);
+	*low = *((volatile unsigned short *) TRAMPOLINE_LOW);
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+	printk("Restoring NMI vector\n");
+	*((volatile unsigned short *) TRAMPOLINE_HIGH) = *high;
+	*((volatile unsigned short *) TRAMPOLINE_LOW) = *low;
+}
+
+#define inquire_remote_apic(apicid) {}
+
+#endif /* __ASM_NUMAQ_WAKECPU_H */
diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h
new file mode 100644
index 0000000..834a302
--- /dev/null
+++ b/arch/x86/include/asm/olpc.h
@@ -0,0 +1,132 @@
+/* OLPC machine specific definitions */
+
+#ifndef _ASM_X86_OLPC_H
+#define _ASM_X86_OLPC_H
+
+#include <asm/geode.h>
+
+struct olpc_platform_t {
+	int flags;
+	uint32_t boardrev;
+	int ecver;
+};
+
+#define OLPC_F_PRESENT		0x01
+#define OLPC_F_DCON		0x02
+#define OLPC_F_VSA		0x04
+
+#ifdef CONFIG_OLPC
+
+extern struct olpc_platform_t olpc_platform_info;
+
+/*
+ * OLPC board IDs contain the major build number within the mask 0x0ff0,
+ * and the minor build number withing 0x000f.  Pre-builds have a minor
+ * number less than 8, and normal builds start at 8.  For example, 0x0B10
+ * is a PreB1, and 0x0C18 is a C1.
+ */
+
+static inline uint32_t olpc_board(uint8_t id)
+{
+	return (id << 4) | 0x8;
+}
+
+static inline uint32_t olpc_board_pre(uint8_t id)
+{
+	return id << 4;
+}
+
+static inline int machine_is_olpc(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
+}
+
+/*
+ * The DCON is OLPC's Display Controller.  It has a number of unique
+ * features that we might want to take advantage of..
+ */
+static inline int olpc_has_dcon(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
+}
+
+/*
+ * The VSA is software from AMD that typical Geode bioses will include.
+ * It is used to emulate the PCI bus, VGA, etc.  OLPC's Open Firmware does
+ * not include the VSA; instead, PCI is emulated by the kernel.
+ *
+ * The VSA is described further in arch/x86/pci/olpc.c.
+ */
+static inline int olpc_has_vsa(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
+}
+
+/*
+ * The "Mass Production" version of OLPC's XO is identified as being model
+ * C2.  During the prototype phase, the following models (in chronological
+ * order) were created: A1, B1, B2, B3, B4, C1.  The A1 through B2 models
+ * were based on Geode GX CPUs, and models after that were based upon
+ * Geode LX CPUs.  There were also some hand-assembled models floating
+ * around, referred to as PreB1, PreB2, etc.
+ */
+static inline int olpc_board_at_least(uint32_t rev)
+{
+	return olpc_platform_info.boardrev >= rev;
+}
+
+#else
+
+static inline int machine_is_olpc(void)
+{
+	return 0;
+}
+
+static inline int olpc_has_dcon(void)
+{
+	return 0;
+}
+
+static inline int olpc_has_vsa(void)
+{
+	return 0;
+}
+
+#endif
+
+/* EC related functions */
+
+extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
+		unsigned char *outbuf, size_t outlen);
+
+extern int olpc_ec_mask_set(uint8_t bits);
+extern int olpc_ec_mask_unset(uint8_t bits);
+
+/* EC commands */
+
+#define EC_FIRMWARE_REV		0x08
+
+/* SCI source values */
+
+#define EC_SCI_SRC_EMPTY	0x00
+#define EC_SCI_SRC_GAME		0x01
+#define EC_SCI_SRC_BATTERY	0x02
+#define EC_SCI_SRC_BATSOC	0x04
+#define EC_SCI_SRC_BATERR	0x08
+#define EC_SCI_SRC_EBOOK	0x10
+#define EC_SCI_SRC_WLAN		0x20
+#define EC_SCI_SRC_ACPWR	0x40
+#define EC_SCI_SRC_ALL		0x7F
+
+/* GPIO assignments */
+
+#define OLPC_GPIO_MIC_AC	geode_gpio(1)
+#define OLPC_GPIO_DCON_IRQ	geode_gpio(7)
+#define OLPC_GPIO_THRM_ALRM	geode_gpio(10)
+#define OLPC_GPIO_SMB_CLK	geode_gpio(14)
+#define OLPC_GPIO_SMB_DATA	geode_gpio(15)
+#define OLPC_GPIO_WORKAUX	geode_gpio(24)
+#define OLPC_GPIO_LID		geode_gpio(26)
+#define OLPC_GPIO_ECSCI		geode_gpio(27)
+
+#endif /* _ASM_X86_OLPC_H */
diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
new file mode 100644
index 0000000..e9873a2
--- /dev/null
+++ b/arch/x86/include/asm/page.h
@@ -0,0 +1,209 @@
+#ifndef _ASM_X86_PAGE_H
+#define _ASM_X86_PAGE_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#define __PHYSICAL_MASK		((phys_addr_t)(1ULL << __PHYSICAL_MASK_SHIFT) - 1)
+#define __VIRTUAL_MASK		((1UL << __VIRTUAL_MASK_SHIFT) - 1)
+
+/* Cast PAGE_MASK to a signed type so that it is sign-extended if
+   virtual addresses are 32-bits but physical addresses are larger
+   (ie, 32-bit PAE). */
+#define PHYSICAL_PAGE_MASK	(((signed long)PAGE_MASK) & __PHYSICAL_MASK)
+
+/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+#define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
+
+/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
+#define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
+
+#define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
+#define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
+
+#define HPAGE_SHIFT		PMD_SHIFT
+#define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+
+#define HUGE_MAX_HSTATE 2
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+#ifdef CONFIG_X86_64
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif	/* CONFIG_X86_64 */
+
+#define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+
+#ifndef __ASSEMBLY__
+
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pgprotval_t pgprot; } pgprot_t;
+
+extern int page_is_ram(unsigned long pagenr);
+extern int pagerange_is_ram(unsigned long start, unsigned long end);
+extern int devmem_is_allowed(unsigned long pagenr);
+extern void map_devmem(unsigned long pfn, unsigned long size,
+		       pgprot_t vma_prot);
+extern void unmap_devmem(unsigned long pfn, unsigned long size,
+			 pgprot_t vma_prot);
+
+extern unsigned long max_low_pfn_mapped;
+extern unsigned long max_pfn_mapped;
+
+struct page;
+
+static inline void clear_user_page(void *page, unsigned long vaddr,
+				struct page *pg)
+{
+	clear_page(page);
+}
+
+static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
+				struct page *topage)
+{
+	copy_page(to, from);
+}
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+static inline pgd_t native_make_pgd(pgdval_t val)
+{
+	return (pgd_t) { val };
+}
+
+static inline pgdval_t native_pgd_val(pgd_t pgd)
+{
+	return pgd.pgd;
+}
+
+#if PAGETABLE_LEVELS >= 3
+#if PAGETABLE_LEVELS == 4
+typedef struct { pudval_t pud; } pud_t;
+
+static inline pud_t native_make_pud(pmdval_t val)
+{
+	return (pud_t) { val };
+}
+
+static inline pudval_t native_pud_val(pud_t pud)
+{
+	return pud.pud;
+}
+#else	/* PAGETABLE_LEVELS == 3 */
+#include <asm-generic/pgtable-nopud.h>
+
+static inline pudval_t native_pud_val(pud_t pud)
+{
+	return native_pgd_val(pud.pgd);
+}
+#endif	/* PAGETABLE_LEVELS == 4 */
+
+typedef struct { pmdval_t pmd; } pmd_t;
+
+static inline pmd_t native_make_pmd(pmdval_t val)
+{
+	return (pmd_t) { val };
+}
+
+static inline pmdval_t native_pmd_val(pmd_t pmd)
+{
+	return pmd.pmd;
+}
+#else  /* PAGETABLE_LEVELS == 2 */
+#include <asm-generic/pgtable-nopmd.h>
+
+static inline pmdval_t native_pmd_val(pmd_t pmd)
+{
+	return native_pgd_val(pmd.pud.pgd);
+}
+#endif	/* PAGETABLE_LEVELS >= 3 */
+
+static inline pte_t native_make_pte(pteval_t val)
+{
+	return (pte_t) { .pte = val };
+}
+
+static inline pteval_t native_pte_val(pte_t pte)
+{
+	return pte.pte;
+}
+
+static inline pteval_t native_pte_flags(pte_t pte)
+{
+	return native_pte_val(pte) & PTE_FLAGS_MASK;
+}
+
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else  /* !CONFIG_PARAVIRT */
+
+#define pgd_val(x)	native_pgd_val(x)
+#define __pgd(x)	native_make_pgd(x)
+
+#ifndef __PAGETABLE_PUD_FOLDED
+#define pud_val(x)	native_pud_val(x)
+#define __pud(x)	native_make_pud(x)
+#endif
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define pmd_val(x)	native_pmd_val(x)
+#define __pmd(x)	native_make_pmd(x)
+#endif
+
+#define pte_val(x)	native_pte_val(x)
+#define pte_flags(x)	native_pte_flags(x)
+#define __pte(x)	native_make_pte(x)
+
+#endif	/* CONFIG_PARAVIRT */
+
+#define __pa(x)		__phys_addr((unsigned long)(x))
+#define __pa_nodebug(x)	__phys_addr_nodebug((unsigned long)(x))
+/* __pa_symbol should be used for C visible symbols.
+   This seems to be the official gcc blessed way to do such arithmetic. */
+#define __pa_symbol(x)	__pa(__phys_reloc_hide((unsigned long)(x)))
+
+#define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
+
+#define __boot_va(x)		__va(x)
+#define __boot_pa(x)		__pa(x)
+
+/*
+ * virt_to_page(kaddr) returns a valid pointer if and only if
+ * virt_addr_valid(kaddr) returns true.
+ */
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)      __va((pfn) << PAGE_SHIFT)
+extern bool __virt_addr_valid(unsigned long kaddr);
+#define virt_addr_valid(kaddr)	__virt_addr_valid((unsigned long) (kaddr))
+
+#endif	/* __ASSEMBLY__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#define __HAVE_ARCH_GATE_AREA 1
+
+#endif	/* __KERNEL__ */
+#endif /* _ASM_X86_PAGE_H */
diff --git a/arch/x86/include/asm/page_32.h b/arch/x86/include/asm/page_32.h
new file mode 100644
index 0000000..bcde0d7
--- /dev/null
+++ b/arch/x86/include/asm/page_32.h
@@ -0,0 +1,136 @@
+#ifndef _ASM_X86_PAGE_32_H
+#define _ASM_X86_PAGE_32_H
+
+/*
+ * This handles the memory map.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ *
+ * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
+ * and CONFIG_HIGHMEM64G options in the kernel configuration.
+ */
+#define __PAGE_OFFSET		_AC(CONFIG_PAGE_OFFSET, UL)
+
+#ifdef CONFIG_4KSTACKS
+#define THREAD_ORDER	0
+#else
+#define THREAD_ORDER	1
+#endif
+#define THREAD_SIZE 	(PAGE_SIZE << THREAD_ORDER)
+
+#define STACKFAULT_STACK 0
+#define DOUBLEFAULT_STACK 1
+#define NMI_STACK 0
+#define DEBUG_STACK 0
+#define MCE_STACK 0
+#define N_EXCEPTION_STACKS 1
+
+#ifdef CONFIG_X86_PAE
+/* 44=32+12, the limit we can fit into an unsigned long pfn */
+#define __PHYSICAL_MASK_SHIFT	44
+#define __VIRTUAL_MASK_SHIFT	32
+#define PAGETABLE_LEVELS	3
+
+#ifndef __ASSEMBLY__
+typedef u64	pteval_t;
+typedef u64	pmdval_t;
+typedef u64	pudval_t;
+typedef u64	pgdval_t;
+typedef u64	pgprotval_t;
+
+typedef union {
+	struct {
+		unsigned long pte_low, pte_high;
+	};
+	pteval_t pte;
+} pte_t;
+#endif	/* __ASSEMBLY__
+ */
+#else  /* !CONFIG_X86_PAE */
+#define __PHYSICAL_MASK_SHIFT	32
+#define __VIRTUAL_MASK_SHIFT	32
+#define PAGETABLE_LEVELS	2
+
+#ifndef __ASSEMBLY__
+typedef unsigned long	pteval_t;
+typedef unsigned long	pmdval_t;
+typedef unsigned long	pudval_t;
+typedef unsigned long	pgdval_t;
+typedef unsigned long	pgprotval_t;
+
+typedef union {
+	pteval_t pte;
+	pteval_t pte_low;
+} pte_t;
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* CONFIG_X86_PAE */
+
+#ifndef __ASSEMBLY__
+typedef struct page *pgtable_t;
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
+
+#ifndef __ASSEMBLY__
+#define __phys_addr_nodebug(x)	((x) - PAGE_OFFSET)
+#ifdef CONFIG_DEBUG_VIRTUAL
+extern unsigned long __phys_addr(unsigned long);
+#else
+#define __phys_addr(x)		__phys_addr_nodebug(x)
+#endif
+#define __phys_reloc_hide(x)	RELOC_HIDE((x), 0)
+
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#endif /* CONFIG_FLATMEM */
+
+extern int nx_enabled;
+
+/*
+ * This much address space is reserved for vmalloc() and iomap()
+ * as well as fixmap mappings.
+ */
+extern unsigned int __VMALLOC_RESERVE;
+extern int sysctl_legacy_va_layout;
+
+extern void find_low_pfn_range(void);
+extern unsigned long init_memory_mapping(unsigned long start,
+					 unsigned long end);
+extern void initmem_init(unsigned long, unsigned long);
+extern void free_initmem(void);
+extern void setup_bootmem_allocator(void);
+
+
+#ifdef CONFIG_X86_USE_3DNOW
+#include <asm/mmx.h>
+
+static inline void clear_page(void *page)
+{
+	mmx_clear_page(page);
+}
+
+static inline void copy_page(void *to, void *from)
+{
+	mmx_copy_page(to, from);
+}
+#else  /* !CONFIG_X86_USE_3DNOW */
+#include <linux/string.h>
+
+static inline void clear_page(void *page)
+{
+	memset(page, 0, PAGE_SIZE);
+}
+
+static inline void copy_page(void *to, void *from)
+{
+	memcpy(to, from, PAGE_SIZE);
+}
+#endif	/* CONFIG_X86_3DNOW */
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PAGE_32_H */
diff --git a/arch/x86/include/asm/page_64.h b/arch/x86/include/asm/page_64.h
new file mode 100644
index 0000000..5ebca29
--- /dev/null
+++ b/arch/x86/include/asm/page_64.h
@@ -0,0 +1,105 @@
+#ifndef _ASM_X86_PAGE_64_H
+#define _ASM_X86_PAGE_64_H
+
+#define PAGETABLE_LEVELS	4
+
+#define THREAD_ORDER	1
+#define THREAD_SIZE  (PAGE_SIZE << THREAD_ORDER)
+#define CURRENT_MASK (~(THREAD_SIZE - 1))
+
+#define EXCEPTION_STACK_ORDER 0
+#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
+
+#define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
+#define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
+
+#define IRQSTACK_ORDER 2
+#define IRQSTACKSIZE (PAGE_SIZE << IRQSTACK_ORDER)
+
+#define STACKFAULT_STACK 1
+#define DOUBLEFAULT_STACK 2
+#define NMI_STACK 3
+#define DEBUG_STACK 4
+#define MCE_STACK 5
+#define N_EXCEPTION_STACKS 5  /* hw limit: 7 */
+
+#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
+#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
+
+/*
+ * Set __PAGE_OFFSET to the most negative possible address +
+ * PGDIR_SIZE*16 (pgd slot 272).  The gap is to allow a space for a
+ * hypervisor to fit.  Choosing 16 slots here is arbitrary, but it's
+ * what Xen requires.
+ */
+#define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
+
+#define __PHYSICAL_START	CONFIG_PHYSICAL_START
+#define __KERNEL_ALIGN		0x200000
+
+/*
+ * Make sure kernel is aligned to 2MB address. Catching it at compile
+ * time is better. Change your config file and compile the kernel
+ * for a 2MB aligned address (CONFIG_PHYSICAL_START)
+ */
+#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
+#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
+#endif
+
+#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
+#define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
+
+/* See Documentation/x86_64/mm.txt for a description of the memory map. */
+#define __PHYSICAL_MASK_SHIFT	46
+#define __VIRTUAL_MASK_SHIFT	48
+
+/*
+ * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
+ * arch/x86/kernel/head_64.S), and it is mapped here:
+ */
+#define KERNEL_IMAGE_SIZE	(512 * 1024 * 1024)
+#define KERNEL_IMAGE_START	_AC(0xffffffff80000000, UL)
+
+#ifndef __ASSEMBLY__
+void clear_page(void *page);
+void copy_page(void *to, void *from);
+
+/* duplicated to the one in bootmem.h */
+extern unsigned long max_pfn;
+extern unsigned long phys_base;
+
+extern unsigned long __phys_addr(unsigned long);
+#define __phys_reloc_hide(x)	(x)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef unsigned long	pteval_t;
+typedef unsigned long	pmdval_t;
+typedef unsigned long	pudval_t;
+typedef unsigned long	pgdval_t;
+typedef unsigned long	pgprotval_t;
+
+typedef struct page *pgtable_t;
+
+typedef struct { pteval_t pte; } pte_t;
+
+#define vmemmap ((struct page *)VMEMMAP_START)
+
+extern unsigned long init_memory_mapping(unsigned long start,
+					 unsigned long end);
+
+extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern void free_initmem(void);
+
+extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
+extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
+
+#endif	/* !__ASSEMBLY__ */
+
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn)          ((pfn) < max_pfn)
+#endif
+
+
+#endif /* _ASM_X86_PAGE_64_H */
diff --git a/arch/x86/include/asm/param.h b/arch/x86/include/asm/param.h
new file mode 100644
index 0000000..6f0d042
--- /dev/null
+++ b/arch/x86/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_X86_PARAM_H
+#define _ASM_X86_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* some user interfaces are */
+# define CLOCKS_PER_SEC	(USER_HZ)       /* in "ticks" like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _ASM_X86_PARAM_H */
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
new file mode 100644
index 0000000..ba3e2ff
--- /dev/null
+++ b/arch/x86/include/asm/paravirt.h
@@ -0,0 +1,1650 @@
+#ifndef _ASM_X86_PARAVIRT_H
+#define _ASM_X86_PARAVIRT_H
+/* Various instructions on x86 need to be replaced for
+ * para-virtualization: those hooks are defined here. */
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/page.h>
+#include <asm/asm.h>
+
+/* Bitmask of what can be clobbered: usually at least eax. */
+#define CLBR_NONE 0
+#define CLBR_EAX  (1 << 0)
+#define CLBR_ECX  (1 << 1)
+#define CLBR_EDX  (1 << 2)
+
+#ifdef CONFIG_X86_64
+#define CLBR_RSI  (1 << 3)
+#define CLBR_RDI  (1 << 4)
+#define CLBR_R8   (1 << 5)
+#define CLBR_R9   (1 << 6)
+#define CLBR_R10  (1 << 7)
+#define CLBR_R11  (1 << 8)
+#define CLBR_ANY  ((1 << 9) - 1)
+#include <asm/desc_defs.h>
+#else
+/* CLBR_ANY should match all regs platform has. For i386, that's just it */
+#define CLBR_ANY  ((1 << 3) - 1)
+#endif /* X86_64 */
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/kmap_types.h>
+#include <asm/desc_defs.h>
+
+struct page;
+struct thread_struct;
+struct desc_ptr;
+struct tss_struct;
+struct mm_struct;
+struct desc_struct;
+
+/* general info */
+struct pv_info {
+	unsigned int kernel_rpl;
+	int shared_kernel_pmd;
+	int paravirt_enabled;
+	const char *name;
+};
+
+struct pv_init_ops {
+	/*
+	 * Patch may replace one of the defined code sequences with
+	 * arbitrary code, subject to the same register constraints.
+	 * This generally means the code is not free to clobber any
+	 * registers other than EAX.  The patch function should return
+	 * the number of bytes of code generated, as we nop pad the
+	 * rest in generic code.
+	 */
+	unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
+			  unsigned long addr, unsigned len);
+
+	/* Basic arch-specific setup */
+	void (*arch_setup)(void);
+	char *(*memory_setup)(void);
+	void (*post_allocator_init)(void);
+
+	/* Print a banner to identify the environment */
+	void (*banner)(void);
+};
+
+
+struct pv_lazy_ops {
+	/* Set deferred update mode, used for batching operations. */
+	void (*enter)(void);
+	void (*leave)(void);
+};
+
+struct pv_time_ops {
+	void (*time_init)(void);
+
+	/* Set and set time of day */
+	unsigned long (*get_wallclock)(void);
+	int (*set_wallclock)(unsigned long);
+
+	unsigned long long (*sched_clock)(void);
+	unsigned long (*get_tsc_khz)(void);
+};
+
+struct pv_cpu_ops {
+	/* hooks for various privileged instructions */
+	unsigned long (*get_debugreg)(int regno);
+	void (*set_debugreg)(int regno, unsigned long value);
+
+	void (*clts)(void);
+
+	unsigned long (*read_cr0)(void);
+	void (*write_cr0)(unsigned long);
+
+	unsigned long (*read_cr4_safe)(void);
+	unsigned long (*read_cr4)(void);
+	void (*write_cr4)(unsigned long);
+
+#ifdef CONFIG_X86_64
+	unsigned long (*read_cr8)(void);
+	void (*write_cr8)(unsigned long);
+#endif
+
+	/* Segment descriptor handling */
+	void (*load_tr_desc)(void);
+	void (*load_gdt)(const struct desc_ptr *);
+	void (*load_idt)(const struct desc_ptr *);
+	void (*store_gdt)(struct desc_ptr *);
+	void (*store_idt)(struct desc_ptr *);
+	void (*set_ldt)(const void *desc, unsigned entries);
+	unsigned long (*store_tr)(void);
+	void (*load_tls)(struct thread_struct *t, unsigned int cpu);
+#ifdef CONFIG_X86_64
+	void (*load_gs_index)(unsigned int idx);
+#endif
+	void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
+				const void *desc);
+	void (*write_gdt_entry)(struct desc_struct *,
+				int entrynum, const void *desc, int size);
+	void (*write_idt_entry)(gate_desc *,
+				int entrynum, const gate_desc *gate);
+	void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
+	void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
+
+	void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
+
+	void (*set_iopl_mask)(unsigned mask);
+
+	void (*wbinvd)(void);
+	void (*io_delay)(void);
+
+	/* cpuid emulation, mostly so that caps bits can be disabled */
+	void (*cpuid)(unsigned int *eax, unsigned int *ebx,
+		      unsigned int *ecx, unsigned int *edx);
+
+	/* MSR, PMC and TSR operations.
+	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
+	u64 (*read_msr_amd)(unsigned int msr, int *err);
+	u64 (*read_msr)(unsigned int msr, int *err);
+	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
+
+	u64 (*read_tsc)(void);
+	u64 (*read_pmc)(int counter);
+	unsigned long long (*read_tscp)(unsigned int *aux);
+
+	/*
+	 * Atomically enable interrupts and return to userspace.  This
+	 * is only ever used to return to 32-bit processes; in a
+	 * 64-bit kernel, it's used for 32-on-64 compat processes, but
+	 * never native 64-bit processes.  (Jump, not call.)
+	 */
+	void (*irq_enable_sysexit)(void);
+
+	/*
+	 * Switch to usermode gs and return to 64-bit usermode using
+	 * sysret.  Only used in 64-bit kernels to return to 64-bit
+	 * processes.  Usermode register state, including %rsp, must
+	 * already be restored.
+	 */
+	void (*usergs_sysret64)(void);
+
+	/*
+	 * Switch to usermode gs and return to 32-bit usermode using
+	 * sysret.  Used to return to 32-on-64 compat processes.
+	 * Other usermode register state, including %esp, must already
+	 * be restored.
+	 */
+	void (*usergs_sysret32)(void);
+
+	/* Normal iret.  Jump to this with the standard iret stack
+	   frame set up. */
+	void (*iret)(void);
+
+	void (*swapgs)(void);
+
+	struct pv_lazy_ops lazy_mode;
+};
+
+struct pv_irq_ops {
+	void (*init_IRQ)(void);
+
+	/*
+	 * Get/set interrupt state.  save_fl and restore_fl are only
+	 * expected to use X86_EFLAGS_IF; all other bits
+	 * returned from save_fl are undefined, and may be ignored by
+	 * restore_fl.
+	 */
+	unsigned long (*save_fl)(void);
+	void (*restore_fl)(unsigned long);
+	void (*irq_disable)(void);
+	void (*irq_enable)(void);
+	void (*safe_halt)(void);
+	void (*halt)(void);
+
+#ifdef CONFIG_X86_64
+	void (*adjust_exception_frame)(void);
+#endif
+};
+
+struct pv_apic_ops {
+#ifdef CONFIG_X86_LOCAL_APIC
+	void (*setup_boot_clock)(void);
+	void (*setup_secondary_clock)(void);
+
+	void (*startup_ipi_hook)(int phys_apicid,
+				 unsigned long start_eip,
+				 unsigned long start_esp);
+#endif
+};
+
+struct pv_mmu_ops {
+	/*
+	 * Called before/after init_mm pagetable setup. setup_start
+	 * may reset %cr3, and may pre-install parts of the pagetable;
+	 * pagetable setup is expected to preserve any existing
+	 * mapping.
+	 */
+	void (*pagetable_setup_start)(pgd_t *pgd_base);
+	void (*pagetable_setup_done)(pgd_t *pgd_base);
+
+	unsigned long (*read_cr2)(void);
+	void (*write_cr2)(unsigned long);
+
+	unsigned long (*read_cr3)(void);
+	void (*write_cr3)(unsigned long);
+
+	/*
+	 * Hooks for intercepting the creation/use/destruction of an
+	 * mm_struct.
+	 */
+	void (*activate_mm)(struct mm_struct *prev,
+			    struct mm_struct *next);
+	void (*dup_mmap)(struct mm_struct *oldmm,
+			 struct mm_struct *mm);
+	void (*exit_mmap)(struct mm_struct *mm);
+
+
+	/* TLB operations */
+	void (*flush_tlb_user)(void);
+	void (*flush_tlb_kernel)(void);
+	void (*flush_tlb_single)(unsigned long addr);
+	void (*flush_tlb_others)(const cpumask_t *cpus, struct mm_struct *mm,
+				 unsigned long va);
+
+	/* Hooks for allocating and freeing a pagetable top-level */
+	int  (*pgd_alloc)(struct mm_struct *mm);
+	void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
+
+	/*
+	 * Hooks for allocating/releasing pagetable pages when they're
+	 * attached to a pagetable
+	 */
+	void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
+	void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
+	void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
+	void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
+	void (*release_pte)(unsigned long pfn);
+	void (*release_pmd)(unsigned long pfn);
+	void (*release_pud)(unsigned long pfn);
+
+	/* Pagetable manipulation functions */
+	void (*set_pte)(pte_t *ptep, pte_t pteval);
+	void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep, pte_t pteval);
+	void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
+	void (*pte_update)(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep);
+	void (*pte_update_defer)(struct mm_struct *mm,
+				 unsigned long addr, pte_t *ptep);
+
+	pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
+					pte_t *ptep);
+	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
+					pte_t *ptep, pte_t pte);
+
+	pteval_t (*pte_val)(pte_t);
+	pteval_t (*pte_flags)(pte_t);
+	pte_t (*make_pte)(pteval_t pte);
+
+	pgdval_t (*pgd_val)(pgd_t);
+	pgd_t (*make_pgd)(pgdval_t pgd);
+
+#if PAGETABLE_LEVELS >= 3
+#ifdef CONFIG_X86_PAE
+	void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
+	void (*set_pte_present)(struct mm_struct *mm, unsigned long addr,
+				pte_t *ptep, pte_t pte);
+	void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
+			  pte_t *ptep);
+	void (*pmd_clear)(pmd_t *pmdp);
+
+#endif	/* CONFIG_X86_PAE */
+
+	void (*set_pud)(pud_t *pudp, pud_t pudval);
+
+	pmdval_t (*pmd_val)(pmd_t);
+	pmd_t (*make_pmd)(pmdval_t pmd);
+
+#if PAGETABLE_LEVELS == 4
+	pudval_t (*pud_val)(pud_t);
+	pud_t (*make_pud)(pudval_t pud);
+
+	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
+#endif	/* PAGETABLE_LEVELS == 4 */
+#endif	/* PAGETABLE_LEVELS >= 3 */
+
+#ifdef CONFIG_HIGHPTE
+	void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
+#endif
+
+	struct pv_lazy_ops lazy_mode;
+
+	/* dom0 ops */
+
+	/* Sometimes the physical address is a pfn, and sometimes its
+	   an mfn.  We can tell which is which from the index. */
+	void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
+			   unsigned long phys, pgprot_t flags);
+};
+
+struct raw_spinlock;
+struct pv_lock_ops {
+	int (*spin_is_locked)(struct raw_spinlock *lock);
+	int (*spin_is_contended)(struct raw_spinlock *lock);
+	void (*spin_lock)(struct raw_spinlock *lock);
+	void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
+	int (*spin_trylock)(struct raw_spinlock *lock);
+	void (*spin_unlock)(struct raw_spinlock *lock);
+};
+
+/* This contains all the paravirt structures: we get a convenient
+ * number for each function using the offset which we use to indicate
+ * what to patch. */
+struct paravirt_patch_template {
+	struct pv_init_ops pv_init_ops;
+	struct pv_time_ops pv_time_ops;
+	struct pv_cpu_ops pv_cpu_ops;
+	struct pv_irq_ops pv_irq_ops;
+	struct pv_apic_ops pv_apic_ops;
+	struct pv_mmu_ops pv_mmu_ops;
+	struct pv_lock_ops pv_lock_ops;
+};
+
+extern struct pv_info pv_info;
+extern struct pv_init_ops pv_init_ops;
+extern struct pv_time_ops pv_time_ops;
+extern struct pv_cpu_ops pv_cpu_ops;
+extern struct pv_irq_ops pv_irq_ops;
+extern struct pv_apic_ops pv_apic_ops;
+extern struct pv_mmu_ops pv_mmu_ops;
+extern struct pv_lock_ops pv_lock_ops;
+
+#define PARAVIRT_PATCH(x)					\
+	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
+
+#define paravirt_type(op)				\
+	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
+	[paravirt_opptr] "m" (op)
+#define paravirt_clobber(clobber)		\
+	[paravirt_clobber] "i" (clobber)
+
+/*
+ * Generate some code, and mark it as patchable by the
+ * apply_paravirt() alternate instruction patcher.
+ */
+#define _paravirt_alt(insn_string, type, clobber)	\
+	"771:\n\t" insn_string "\n" "772:\n"		\
+	".pushsection .parainstructions,\"a\"\n"	\
+	_ASM_ALIGN "\n"					\
+	_ASM_PTR " 771b\n"				\
+	"  .byte " type "\n"				\
+	"  .byte 772b-771b\n"				\
+	"  .short " clobber "\n"			\
+	".popsection\n"
+
+/* Generate patchable code, with the default asm parameters. */
+#define paravirt_alt(insn_string)					\
+	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
+
+/* Simple instruction patching code. */
+#define DEF_NATIVE(ops, name, code) 					\
+	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
+	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
+
+unsigned paravirt_patch_nop(void);
+unsigned paravirt_patch_ignore(unsigned len);
+unsigned paravirt_patch_call(void *insnbuf,
+			     const void *target, u16 tgt_clobbers,
+			     unsigned long addr, u16 site_clobbers,
+			     unsigned len);
+unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
+			    unsigned long addr, unsigned len);
+unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
+				unsigned long addr, unsigned len);
+
+unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
+			      const char *start, const char *end);
+
+unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
+		      unsigned long addr, unsigned len);
+
+int paravirt_disable_iospace(void);
+
+/*
+ * This generates an indirect call based on the operation type number.
+ * The type number, computed in PARAVIRT_PATCH, is derived from the
+ * offset into the paravirt_patch_template structure, and can therefore be
+ * freely converted back into a structure offset.
+ */
+#define PARAVIRT_CALL	"call *%[paravirt_opptr];"
+
+/*
+ * These macros are intended to wrap calls through one of the paravirt
+ * ops structs, so that they can be later identified and patched at
+ * runtime.
+ *
+ * Normally, a call to a pv_op function is a simple indirect call:
+ * (pv_op_struct.operations)(args...).
+ *
+ * Unfortunately, this is a relatively slow operation for modern CPUs,
+ * because it cannot necessarily determine what the destination
+ * address is.  In this case, the address is a runtime constant, so at
+ * the very least we can patch the call to e a simple direct call, or
+ * ideally, patch an inline implementation into the callsite.  (Direct
+ * calls are essentially free, because the call and return addresses
+ * are completely predictable.)
+ *
+ * For i386, these macros rely on the standard gcc "regparm(3)" calling
+ * convention, in which the first three arguments are placed in %eax,
+ * %edx, %ecx (in that order), and the remaining arguments are placed
+ * on the stack.  All caller-save registers (eax,edx,ecx) are expected
+ * to be modified (either clobbered or used for return values).
+ * X86_64, on the other hand, already specifies a register-based calling
+ * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
+ * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
+ * special handling for dealing with 4 arguments, unlike i386.
+ * However, x86_64 also have to clobber all caller saved registers, which
+ * unfortunately, are quite a bit (r8 - r11)
+ *
+ * The call instruction itself is marked by placing its start address
+ * and size into the .parainstructions section, so that
+ * apply_paravirt() in arch/i386/kernel/alternative.c can do the
+ * appropriate patching under the control of the backend pv_init_ops
+ * implementation.
+ *
+ * Unfortunately there's no way to get gcc to generate the args setup
+ * for the call, and then allow the call itself to be generated by an
+ * inline asm.  Because of this, we must do the complete arg setup and
+ * return value handling from within these macros.  This is fairly
+ * cumbersome.
+ *
+ * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
+ * It could be extended to more arguments, but there would be little
+ * to be gained from that.  For each number of arguments, there are
+ * the two VCALL and CALL variants for void and non-void functions.
+ *
+ * When there is a return value, the invoker of the macro must specify
+ * the return type.  The macro then uses sizeof() on that type to
+ * determine whether its a 32 or 64 bit value, and places the return
+ * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
+ * 64-bit). For x86_64 machines, it just returns at %rax regardless of
+ * the return value size.
+ *
+ * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
+ * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
+ * in low,high order
+ *
+ * Small structures are passed and returned in registers.  The macro
+ * calling convention can't directly deal with this, so the wrapper
+ * functions must do this.
+ *
+ * These PVOP_* macros are only defined within this header.  This
+ * means that all uses must be wrapped in inline functions.  This also
+ * makes sure the incoming and outgoing types are always correct.
+ */
+#ifdef CONFIG_X86_32
+#define PVOP_VCALL_ARGS			unsigned long __eax, __edx, __ecx
+#define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
+#define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
+					"=c" (__ecx)
+#define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
+#define EXTRA_CLOBBERS
+#define VEXTRA_CLOBBERS
+#else
+#define PVOP_VCALL_ARGS		unsigned long __edi, __esi, __edx, __ecx
+#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
+#define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
+				"=S" (__esi), "=d" (__edx),		\
+				"=c" (__ecx)
+
+#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
+
+#define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
+#define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
+#endif
+
+#ifdef CONFIG_PARAVIRT_DEBUG
+#define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
+#else
+#define PVOP_TEST_NULL(op)	((void)op)
+#endif
+
+#define __PVOP_CALL(rettype, op, pre, post, ...)			\
+	({								\
+		rettype __ret;						\
+		PVOP_CALL_ARGS;					\
+		PVOP_TEST_NULL(op);					\
+		/* This is 32-bit specific, but is okay in 64-bit */	\
+		/* since this condition will never hold */		\
+		if (sizeof(rettype) > sizeof(unsigned long)) {		\
+			asm volatile(pre				\
+				     paravirt_alt(PARAVIRT_CALL)	\
+				     post				\
+				     : PVOP_CALL_CLOBBERS		\
+				     : paravirt_type(op),		\
+				       paravirt_clobber(CLBR_ANY),	\
+				       ##__VA_ARGS__			\
+				     : "memory", "cc" EXTRA_CLOBBERS);	\
+			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
+		} else {						\
+			asm volatile(pre				\
+				     paravirt_alt(PARAVIRT_CALL)	\
+				     post				\
+				     : PVOP_CALL_CLOBBERS		\
+				     : paravirt_type(op),		\
+				       paravirt_clobber(CLBR_ANY),	\
+				       ##__VA_ARGS__			\
+				     : "memory", "cc" EXTRA_CLOBBERS);	\
+			__ret = (rettype)__eax;				\
+		}							\
+		__ret;							\
+	})
+#define __PVOP_VCALL(op, pre, post, ...)				\
+	({								\
+		PVOP_VCALL_ARGS;					\
+		PVOP_TEST_NULL(op);					\
+		asm volatile(pre					\
+			     paravirt_alt(PARAVIRT_CALL)		\
+			     post					\
+			     : PVOP_VCALL_CLOBBERS			\
+			     : paravirt_type(op),			\
+			       paravirt_clobber(CLBR_ANY),		\
+			       ##__VA_ARGS__				\
+			     : "memory", "cc" VEXTRA_CLOBBERS);		\
+	})
+
+#define PVOP_CALL0(rettype, op)						\
+	__PVOP_CALL(rettype, op, "", "")
+#define PVOP_VCALL0(op)							\
+	__PVOP_VCALL(op, "", "")
+
+#define PVOP_CALL1(rettype, op, arg1)					\
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)))
+#define PVOP_VCALL1(op, arg1)						\
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)))
+
+#define PVOP_CALL2(rettype, op, arg1, arg2)				\
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)), 	\
+	"1" ((unsigned long)(arg2)))
+#define PVOP_VCALL2(op, arg1, arg2)					\
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)), 		\
+	"1" ((unsigned long)(arg2)))
+
+#define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
+#define PVOP_VCALL3(op, arg1, arg2, arg3)				\
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
+
+/* This is the only difference in x86_64. We can make it much simpler */
+#ifdef CONFIG_X86_32
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
+	__PVOP_CALL(rettype, op,					\
+		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
+		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
+		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
+	__PVOP_VCALL(op,						\
+		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
+		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
+		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+#else
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
+	"3"((unsigned long)(arg4)))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
+	"3"((unsigned long)(arg4)))
+#endif
+
+static inline int paravirt_enabled(void)
+{
+	return pv_info.paravirt_enabled;
+}
+
+static inline void load_sp0(struct tss_struct *tss,
+			     struct thread_struct *thread)
+{
+	PVOP_VCALL2(pv_cpu_ops.load_sp0, tss, thread);
+}
+
+#define ARCH_SETUP			pv_init_ops.arch_setup();
+static inline unsigned long get_wallclock(void)
+{
+	return PVOP_CALL0(unsigned long, pv_time_ops.get_wallclock);
+}
+
+static inline int set_wallclock(unsigned long nowtime)
+{
+	return PVOP_CALL1(int, pv_time_ops.set_wallclock, nowtime);
+}
+
+static inline void (*choose_time_init(void))(void)
+{
+	return pv_time_ops.time_init;
+}
+
+/* The paravirtualized CPUID instruction. */
+static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
+			   unsigned int *ecx, unsigned int *edx)
+{
+	PVOP_VCALL4(pv_cpu_ops.cpuid, eax, ebx, ecx, edx);
+}
+
+/*
+ * These special macros can be used to get or set a debugging register
+ */
+static inline unsigned long paravirt_get_debugreg(int reg)
+{
+	return PVOP_CALL1(unsigned long, pv_cpu_ops.get_debugreg, reg);
+}
+#define get_debugreg(var, reg) var = paravirt_get_debugreg(reg)
+static inline void set_debugreg(unsigned long val, int reg)
+{
+	PVOP_VCALL2(pv_cpu_ops.set_debugreg, reg, val);
+}
+
+static inline void clts(void)
+{
+	PVOP_VCALL0(pv_cpu_ops.clts);
+}
+
+static inline unsigned long read_cr0(void)
+{
+	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr0);
+}
+
+static inline void write_cr0(unsigned long x)
+{
+	PVOP_VCALL1(pv_cpu_ops.write_cr0, x);
+}
+
+static inline unsigned long read_cr2(void)
+{
+	return PVOP_CALL0(unsigned long, pv_mmu_ops.read_cr2);
+}
+
+static inline void write_cr2(unsigned long x)
+{
+	PVOP_VCALL1(pv_mmu_ops.write_cr2, x);
+}
+
+static inline unsigned long read_cr3(void)
+{
+	return PVOP_CALL0(unsigned long, pv_mmu_ops.read_cr3);
+}
+
+static inline void write_cr3(unsigned long x)
+{
+	PVOP_VCALL1(pv_mmu_ops.write_cr3, x);
+}
+
+static inline unsigned long read_cr4(void)
+{
+	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr4);
+}
+static inline unsigned long read_cr4_safe(void)
+{
+	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr4_safe);
+}
+
+static inline void write_cr4(unsigned long x)
+{
+	PVOP_VCALL1(pv_cpu_ops.write_cr4, x);
+}
+
+#ifdef CONFIG_X86_64
+static inline unsigned long read_cr8(void)
+{
+	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr8);
+}
+
+static inline void write_cr8(unsigned long x)
+{
+	PVOP_VCALL1(pv_cpu_ops.write_cr8, x);
+}
+#endif
+
+static inline void raw_safe_halt(void)
+{
+	PVOP_VCALL0(pv_irq_ops.safe_halt);
+}
+
+static inline void halt(void)
+{
+	PVOP_VCALL0(pv_irq_ops.safe_halt);
+}
+
+static inline void wbinvd(void)
+{
+	PVOP_VCALL0(pv_cpu_ops.wbinvd);
+}
+
+#define get_kernel_rpl()  (pv_info.kernel_rpl)
+
+static inline u64 paravirt_read_msr(unsigned msr, int *err)
+{
+	return PVOP_CALL2(u64, pv_cpu_ops.read_msr, msr, err);
+}
+static inline u64 paravirt_read_msr_amd(unsigned msr, int *err)
+{
+	return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err);
+}
+static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
+{
+	return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
+}
+
+/* These should all do BUG_ON(_err), but our headers are too tangled. */
+#define rdmsr(msr, val1, val2)			\
+do {						\
+	int _err;				\
+	u64 _l = paravirt_read_msr(msr, &_err);	\
+	val1 = (u32)_l;				\
+	val2 = _l >> 32;			\
+} while (0)
+
+#define wrmsr(msr, val1, val2)			\
+do {						\
+	paravirt_write_msr(msr, val1, val2);	\
+} while (0)
+
+#define rdmsrl(msr, val)			\
+do {						\
+	int _err;				\
+	val = paravirt_read_msr(msr, &_err);	\
+} while (0)
+
+#define wrmsrl(msr, val)	wrmsr(msr, (u32)((u64)(val)), ((u64)(val))>>32)
+#define wrmsr_safe(msr, a, b)	paravirt_write_msr(msr, a, b)
+
+/* rdmsr with exception handling */
+#define rdmsr_safe(msr, a, b)			\
+({						\
+	int _err;				\
+	u64 _l = paravirt_read_msr(msr, &_err);	\
+	(*a) = (u32)_l;				\
+	(*b) = _l >> 32;			\
+	_err;					\
+})
+
+static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
+{
+	int err;
+
+	*p = paravirt_read_msr(msr, &err);
+	return err;
+}
+static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
+{
+	int err;
+
+	*p = paravirt_read_msr_amd(msr, &err);
+	return err;
+}
+
+static inline u64 paravirt_read_tsc(void)
+{
+	return PVOP_CALL0(u64, pv_cpu_ops.read_tsc);
+}
+
+#define rdtscl(low)				\
+do {						\
+	u64 _l = paravirt_read_tsc();		\
+	low = (int)_l;				\
+} while (0)
+
+#define rdtscll(val) (val = paravirt_read_tsc())
+
+static inline unsigned long long paravirt_sched_clock(void)
+{
+	return PVOP_CALL0(unsigned long long, pv_time_ops.sched_clock);
+}
+#define calibrate_tsc() (pv_time_ops.get_tsc_khz())
+
+static inline unsigned long long paravirt_read_pmc(int counter)
+{
+	return PVOP_CALL1(u64, pv_cpu_ops.read_pmc, counter);
+}
+
+#define rdpmc(counter, low, high)		\
+do {						\
+	u64 _l = paravirt_read_pmc(counter);	\
+	low = (u32)_l;				\
+	high = _l >> 32;			\
+} while (0)
+
+static inline unsigned long long paravirt_rdtscp(unsigned int *aux)
+{
+	return PVOP_CALL1(u64, pv_cpu_ops.read_tscp, aux);
+}
+
+#define rdtscp(low, high, aux)				\
+do {							\
+	int __aux;					\
+	unsigned long __val = paravirt_rdtscp(&__aux);	\
+	(low) = (u32)__val;				\
+	(high) = (u32)(__val >> 32);			\
+	(aux) = __aux;					\
+} while (0)
+
+#define rdtscpll(val, aux)				\
+do {							\
+	unsigned long __aux; 				\
+	val = paravirt_rdtscp(&__aux);			\
+	(aux) = __aux;					\
+} while (0)
+
+static inline void paravirt_alloc_ldt(struct desc_struct *ldt, unsigned entries)
+{
+	PVOP_VCALL2(pv_cpu_ops.alloc_ldt, ldt, entries);
+}
+
+static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
+{
+	PVOP_VCALL2(pv_cpu_ops.free_ldt, ldt, entries);
+}
+
+static inline void load_TR_desc(void)
+{
+	PVOP_VCALL0(pv_cpu_ops.load_tr_desc);
+}
+static inline void load_gdt(const struct desc_ptr *dtr)
+{
+	PVOP_VCALL1(pv_cpu_ops.load_gdt, dtr);
+}
+static inline void load_idt(const struct desc_ptr *dtr)
+{
+	PVOP_VCALL1(pv_cpu_ops.load_idt, dtr);
+}
+static inline void set_ldt(const void *addr, unsigned entries)
+{
+	PVOP_VCALL2(pv_cpu_ops.set_ldt, addr, entries);
+}
+static inline void store_gdt(struct desc_ptr *dtr)
+{
+	PVOP_VCALL1(pv_cpu_ops.store_gdt, dtr);
+}
+static inline void store_idt(struct desc_ptr *dtr)
+{
+	PVOP_VCALL1(pv_cpu_ops.store_idt, dtr);
+}
+static inline unsigned long paravirt_store_tr(void)
+{
+	return PVOP_CALL0(unsigned long, pv_cpu_ops.store_tr);
+}
+#define store_tr(tr)	((tr) = paravirt_store_tr())
+static inline void load_TLS(struct thread_struct *t, unsigned cpu)
+{
+	PVOP_VCALL2(pv_cpu_ops.load_tls, t, cpu);
+}
+
+#ifdef CONFIG_X86_64
+static inline void load_gs_index(unsigned int gs)
+{
+	PVOP_VCALL1(pv_cpu_ops.load_gs_index, gs);
+}
+#endif
+
+static inline void write_ldt_entry(struct desc_struct *dt, int entry,
+				   const void *desc)
+{
+	PVOP_VCALL3(pv_cpu_ops.write_ldt_entry, dt, entry, desc);
+}
+
+static inline void write_gdt_entry(struct desc_struct *dt, int entry,
+				   void *desc, int type)
+{
+	PVOP_VCALL4(pv_cpu_ops.write_gdt_entry, dt, entry, desc, type);
+}
+
+static inline void write_idt_entry(gate_desc *dt, int entry, const gate_desc *g)
+{
+	PVOP_VCALL3(pv_cpu_ops.write_idt_entry, dt, entry, g);
+}
+static inline void set_iopl_mask(unsigned mask)
+{
+	PVOP_VCALL1(pv_cpu_ops.set_iopl_mask, mask);
+}
+
+/* The paravirtualized I/O functions */
+static inline void slow_down_io(void)
+{
+	pv_cpu_ops.io_delay();
+#ifdef REALLY_SLOW_IO
+	pv_cpu_ops.io_delay();
+	pv_cpu_ops.io_delay();
+	pv_cpu_ops.io_delay();
+#endif
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static inline void setup_boot_clock(void)
+{
+	PVOP_VCALL0(pv_apic_ops.setup_boot_clock);
+}
+
+static inline void setup_secondary_clock(void)
+{
+	PVOP_VCALL0(pv_apic_ops.setup_secondary_clock);
+}
+#endif
+
+static inline void paravirt_post_allocator_init(void)
+{
+	if (pv_init_ops.post_allocator_init)
+		(*pv_init_ops.post_allocator_init)();
+}
+
+static inline void paravirt_pagetable_setup_start(pgd_t *base)
+{
+	(*pv_mmu_ops.pagetable_setup_start)(base);
+}
+
+static inline void paravirt_pagetable_setup_done(pgd_t *base)
+{
+	(*pv_mmu_ops.pagetable_setup_done)(base);
+}
+
+#ifdef CONFIG_SMP
+static inline void startup_ipi_hook(int phys_apicid, unsigned long start_eip,
+				    unsigned long start_esp)
+{
+	PVOP_VCALL3(pv_apic_ops.startup_ipi_hook,
+		    phys_apicid, start_eip, start_esp);
+}
+#endif
+
+static inline void paravirt_activate_mm(struct mm_struct *prev,
+					struct mm_struct *next)
+{
+	PVOP_VCALL2(pv_mmu_ops.activate_mm, prev, next);
+}
+
+static inline void arch_dup_mmap(struct mm_struct *oldmm,
+				 struct mm_struct *mm)
+{
+	PVOP_VCALL2(pv_mmu_ops.dup_mmap, oldmm, mm);
+}
+
+static inline void arch_exit_mmap(struct mm_struct *mm)
+{
+	PVOP_VCALL1(pv_mmu_ops.exit_mmap, mm);
+}
+
+static inline void __flush_tlb(void)
+{
+	PVOP_VCALL0(pv_mmu_ops.flush_tlb_user);
+}
+static inline void __flush_tlb_global(void)
+{
+	PVOP_VCALL0(pv_mmu_ops.flush_tlb_kernel);
+}
+static inline void __flush_tlb_single(unsigned long addr)
+{
+	PVOP_VCALL1(pv_mmu_ops.flush_tlb_single, addr);
+}
+
+static inline void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
+				    unsigned long va)
+{
+	PVOP_VCALL3(pv_mmu_ops.flush_tlb_others, &cpumask, mm, va);
+}
+
+static inline int paravirt_pgd_alloc(struct mm_struct *mm)
+{
+	return PVOP_CALL1(int, pv_mmu_ops.pgd_alloc, mm);
+}
+
+static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	PVOP_VCALL2(pv_mmu_ops.pgd_free, mm, pgd);
+}
+
+static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned long pfn)
+{
+	PVOP_VCALL2(pv_mmu_ops.alloc_pte, mm, pfn);
+}
+static inline void paravirt_release_pte(unsigned long pfn)
+{
+	PVOP_VCALL1(pv_mmu_ops.release_pte, pfn);
+}
+
+static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
+{
+	PVOP_VCALL2(pv_mmu_ops.alloc_pmd, mm, pfn);
+}
+
+static inline void paravirt_alloc_pmd_clone(unsigned long pfn, unsigned long clonepfn,
+					    unsigned long start, unsigned long count)
+{
+	PVOP_VCALL4(pv_mmu_ops.alloc_pmd_clone, pfn, clonepfn, start, count);
+}
+static inline void paravirt_release_pmd(unsigned long pfn)
+{
+	PVOP_VCALL1(pv_mmu_ops.release_pmd, pfn);
+}
+
+static inline void paravirt_alloc_pud(struct mm_struct *mm, unsigned long pfn)
+{
+	PVOP_VCALL2(pv_mmu_ops.alloc_pud, mm, pfn);
+}
+static inline void paravirt_release_pud(unsigned long pfn)
+{
+	PVOP_VCALL1(pv_mmu_ops.release_pud, pfn);
+}
+
+#ifdef CONFIG_HIGHPTE
+static inline void *kmap_atomic_pte(struct page *page, enum km_type type)
+{
+	unsigned long ret;
+	ret = PVOP_CALL2(unsigned long, pv_mmu_ops.kmap_atomic_pte, page, type);
+	return (void *)ret;
+}
+#endif
+
+static inline void pte_update(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep)
+{
+	PVOP_VCALL3(pv_mmu_ops.pte_update, mm, addr, ptep);
+}
+
+static inline void pte_update_defer(struct mm_struct *mm, unsigned long addr,
+				    pte_t *ptep)
+{
+	PVOP_VCALL3(pv_mmu_ops.pte_update_defer, mm, addr, ptep);
+}
+
+static inline pte_t __pte(pteval_t val)
+{
+	pteval_t ret;
+
+	if (sizeof(pteval_t) > sizeof(long))
+		ret = PVOP_CALL2(pteval_t,
+				 pv_mmu_ops.make_pte,
+				 val, (u64)val >> 32);
+	else
+		ret = PVOP_CALL1(pteval_t,
+				 pv_mmu_ops.make_pte,
+				 val);
+
+	return (pte_t) { .pte = ret };
+}
+
+static inline pteval_t pte_val(pte_t pte)
+{
+	pteval_t ret;
+
+	if (sizeof(pteval_t) > sizeof(long))
+		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_val,
+				 pte.pte, (u64)pte.pte >> 32);
+	else
+		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_val,
+				 pte.pte);
+
+	return ret;
+}
+
+static inline pteval_t pte_flags(pte_t pte)
+{
+	pteval_t ret;
+
+	if (sizeof(pteval_t) > sizeof(long))
+		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_flags,
+				 pte.pte, (u64)pte.pte >> 32);
+	else
+		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags,
+				 pte.pte);
+
+#ifdef CONFIG_PARAVIRT_DEBUG
+	BUG_ON(ret & PTE_PFN_MASK);
+#endif
+	return ret;
+}
+
+static inline pgd_t __pgd(pgdval_t val)
+{
+	pgdval_t ret;
+
+	if (sizeof(pgdval_t) > sizeof(long))
+		ret = PVOP_CALL2(pgdval_t, pv_mmu_ops.make_pgd,
+				 val, (u64)val >> 32);
+	else
+		ret = PVOP_CALL1(pgdval_t, pv_mmu_ops.make_pgd,
+				 val);
+
+	return (pgd_t) { ret };
+}
+
+static inline pgdval_t pgd_val(pgd_t pgd)
+{
+	pgdval_t ret;
+
+	if (sizeof(pgdval_t) > sizeof(long))
+		ret =  PVOP_CALL2(pgdval_t, pv_mmu_ops.pgd_val,
+				  pgd.pgd, (u64)pgd.pgd >> 32);
+	else
+		ret =  PVOP_CALL1(pgdval_t, pv_mmu_ops.pgd_val,
+				  pgd.pgd);
+
+	return ret;
+}
+
+#define  __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
+static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr,
+					   pte_t *ptep)
+{
+	pteval_t ret;
+
+	ret = PVOP_CALL3(pteval_t, pv_mmu_ops.ptep_modify_prot_start,
+			 mm, addr, ptep);
+
+	return (pte_t) { .pte = ret };
+}
+
+static inline void ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
+					   pte_t *ptep, pte_t pte)
+{
+	if (sizeof(pteval_t) > sizeof(long))
+		/* 5 arg words */
+		pv_mmu_ops.ptep_modify_prot_commit(mm, addr, ptep, pte);
+	else
+		PVOP_VCALL4(pv_mmu_ops.ptep_modify_prot_commit,
+			    mm, addr, ptep, pte.pte);
+}
+
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	if (sizeof(pteval_t) > sizeof(long))
+		PVOP_VCALL3(pv_mmu_ops.set_pte, ptep,
+			    pte.pte, (u64)pte.pte >> 32);
+	else
+		PVOP_VCALL2(pv_mmu_ops.set_pte, ptep,
+			    pte.pte);
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+	if (sizeof(pteval_t) > sizeof(long))
+		/* 5 arg words */
+		pv_mmu_ops.set_pte_at(mm, addr, ptep, pte);
+	else
+		PVOP_VCALL4(pv_mmu_ops.set_pte_at, mm, addr, ptep, pte.pte);
+}
+
+static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+	pmdval_t val = native_pmd_val(pmd);
+
+	if (sizeof(pmdval_t) > sizeof(long))
+		PVOP_VCALL3(pv_mmu_ops.set_pmd, pmdp, val, (u64)val >> 32);
+	else
+		PVOP_VCALL2(pv_mmu_ops.set_pmd, pmdp, val);
+}
+
+#if PAGETABLE_LEVELS >= 3
+static inline pmd_t __pmd(pmdval_t val)
+{
+	pmdval_t ret;
+
+	if (sizeof(pmdval_t) > sizeof(long))
+		ret = PVOP_CALL2(pmdval_t, pv_mmu_ops.make_pmd,
+				 val, (u64)val >> 32);
+	else
+		ret = PVOP_CALL1(pmdval_t, pv_mmu_ops.make_pmd,
+				 val);
+
+	return (pmd_t) { ret };
+}
+
+static inline pmdval_t pmd_val(pmd_t pmd)
+{
+	pmdval_t ret;
+
+	if (sizeof(pmdval_t) > sizeof(long))
+		ret =  PVOP_CALL2(pmdval_t, pv_mmu_ops.pmd_val,
+				  pmd.pmd, (u64)pmd.pmd >> 32);
+	else
+		ret =  PVOP_CALL1(pmdval_t, pv_mmu_ops.pmd_val,
+				  pmd.pmd);
+
+	return ret;
+}
+
+static inline void set_pud(pud_t *pudp, pud_t pud)
+{
+	pudval_t val = native_pud_val(pud);
+
+	if (sizeof(pudval_t) > sizeof(long))
+		PVOP_VCALL3(pv_mmu_ops.set_pud, pudp,
+			    val, (u64)val >> 32);
+	else
+		PVOP_VCALL2(pv_mmu_ops.set_pud, pudp,
+			    val);
+}
+#if PAGETABLE_LEVELS == 4
+static inline pud_t __pud(pudval_t val)
+{
+	pudval_t ret;
+
+	if (sizeof(pudval_t) > sizeof(long))
+		ret = PVOP_CALL2(pudval_t, pv_mmu_ops.make_pud,
+				 val, (u64)val >> 32);
+	else
+		ret = PVOP_CALL1(pudval_t, pv_mmu_ops.make_pud,
+				 val);
+
+	return (pud_t) { ret };
+}
+
+static inline pudval_t pud_val(pud_t pud)
+{
+	pudval_t ret;
+
+	if (sizeof(pudval_t) > sizeof(long))
+		ret =  PVOP_CALL2(pudval_t, pv_mmu_ops.pud_val,
+				  pud.pud, (u64)pud.pud >> 32);
+	else
+		ret =  PVOP_CALL1(pudval_t, pv_mmu_ops.pud_val,
+				  pud.pud);
+
+	return ret;
+}
+
+static inline void set_pgd(pgd_t *pgdp, pgd_t pgd)
+{
+	pgdval_t val = native_pgd_val(pgd);
+
+	if (sizeof(pgdval_t) > sizeof(long))
+		PVOP_VCALL3(pv_mmu_ops.set_pgd, pgdp,
+			    val, (u64)val >> 32);
+	else
+		PVOP_VCALL2(pv_mmu_ops.set_pgd, pgdp,
+			    val);
+}
+
+static inline void pgd_clear(pgd_t *pgdp)
+{
+	set_pgd(pgdp, __pgd(0));
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	set_pud(pudp, __pud(0));
+}
+
+#endif	/* PAGETABLE_LEVELS == 4 */
+
+#endif	/* PAGETABLE_LEVELS >= 3 */
+
+#ifdef CONFIG_X86_PAE
+/* Special-case pte-setting operations for PAE, which can't update a
+   64-bit pte atomically */
+static inline void set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	PVOP_VCALL3(pv_mmu_ops.set_pte_atomic, ptep,
+		    pte.pte, pte.pte >> 32);
+}
+
+static inline void set_pte_present(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	/* 5 arg words */
+	pv_mmu_ops.set_pte_present(mm, addr, ptep, pte);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t *ptep)
+{
+	PVOP_VCALL3(pv_mmu_ops.pte_clear, mm, addr, ptep);
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	PVOP_VCALL1(pv_mmu_ops.pmd_clear, pmdp);
+}
+#else  /* !CONFIG_X86_PAE */
+static inline void set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	set_pte(ptep, pte);
+}
+
+static inline void set_pte_present(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte(ptep, pte);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t *ptep)
+{
+	set_pte_at(mm, addr, ptep, __pte(0));
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	set_pmd(pmdp, __pmd(0));
+}
+#endif	/* CONFIG_X86_PAE */
+
+/* Lazy mode for batching updates / context switch */
+enum paravirt_lazy_mode {
+	PARAVIRT_LAZY_NONE,
+	PARAVIRT_LAZY_MMU,
+	PARAVIRT_LAZY_CPU,
+};
+
+enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
+void paravirt_enter_lazy_cpu(void);
+void paravirt_leave_lazy_cpu(void);
+void paravirt_enter_lazy_mmu(void);
+void paravirt_leave_lazy_mmu(void);
+void paravirt_leave_lazy(enum paravirt_lazy_mode mode);
+
+#define  __HAVE_ARCH_ENTER_LAZY_CPU_MODE
+static inline void arch_enter_lazy_cpu_mode(void)
+{
+	PVOP_VCALL0(pv_cpu_ops.lazy_mode.enter);
+}
+
+static inline void arch_leave_lazy_cpu_mode(void)
+{
+	PVOP_VCALL0(pv_cpu_ops.lazy_mode.leave);
+}
+
+static inline void arch_flush_lazy_cpu_mode(void)
+{
+	if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)) {
+		arch_leave_lazy_cpu_mode();
+		arch_enter_lazy_cpu_mode();
+	}
+}
+
+
+#define  __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+static inline void arch_enter_lazy_mmu_mode(void)
+{
+	PVOP_VCALL0(pv_mmu_ops.lazy_mode.enter);
+}
+
+static inline void arch_leave_lazy_mmu_mode(void)
+{
+	PVOP_VCALL0(pv_mmu_ops.lazy_mode.leave);
+}
+
+static inline void arch_flush_lazy_mmu_mode(void)
+{
+	if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU)) {
+		arch_leave_lazy_mmu_mode();
+		arch_enter_lazy_mmu_mode();
+	}
+}
+
+static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
+				unsigned long phys, pgprot_t flags)
+{
+	pv_mmu_ops.set_fixmap(idx, phys, flags);
+}
+
+void _paravirt_nop(void);
+#define paravirt_nop	((void *)_paravirt_nop)
+
+void paravirt_use_bytelocks(void);
+
+#ifdef CONFIG_SMP
+
+static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
+{
+	return PVOP_CALL1(int, pv_lock_ops.spin_is_locked, lock);
+}
+
+static inline int __raw_spin_is_contended(struct raw_spinlock *lock)
+{
+	return PVOP_CALL1(int, pv_lock_ops.spin_is_contended, lock);
+}
+
+static __always_inline void __raw_spin_lock(struct raw_spinlock *lock)
+{
+	PVOP_VCALL1(pv_lock_ops.spin_lock, lock);
+}
+
+static __always_inline void __raw_spin_lock_flags(struct raw_spinlock *lock,
+						  unsigned long flags)
+{
+	PVOP_VCALL2(pv_lock_ops.spin_lock_flags, lock, flags);
+}
+
+static __always_inline int __raw_spin_trylock(struct raw_spinlock *lock)
+{
+	return PVOP_CALL1(int, pv_lock_ops.spin_trylock, lock);
+}
+
+static __always_inline void __raw_spin_unlock(struct raw_spinlock *lock)
+{
+	PVOP_VCALL1(pv_lock_ops.spin_unlock, lock);
+}
+
+#endif
+
+/* These all sit in the .parainstructions section to tell us what to patch. */
+struct paravirt_patch_site {
+	u8 *instr; 		/* original instructions */
+	u8 instrtype;		/* type of this instruction */
+	u8 len;			/* length of original instruction */
+	u16 clobbers;		/* what registers you may clobber */
+};
+
+extern struct paravirt_patch_site __parainstructions[],
+	__parainstructions_end[];
+
+#ifdef CONFIG_X86_32
+#define PV_SAVE_REGS "pushl %%ecx; pushl %%edx;"
+#define PV_RESTORE_REGS "popl %%edx; popl %%ecx"
+#define PV_FLAGS_ARG "0"
+#define PV_EXTRA_CLOBBERS
+#define PV_VEXTRA_CLOBBERS
+#else
+/* We save some registers, but all of them, that's too much. We clobber all
+ * caller saved registers but the argument parameter */
+#define PV_SAVE_REGS "pushq %%rdi;"
+#define PV_RESTORE_REGS "popq %%rdi;"
+#define PV_EXTRA_CLOBBERS EXTRA_CLOBBERS, "rcx" , "rdx", "rsi"
+#define PV_VEXTRA_CLOBBERS EXTRA_CLOBBERS, "rdi", "rcx" , "rdx", "rsi"
+#define PV_FLAGS_ARG "D"
+#endif
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long f;
+
+	asm volatile(paravirt_alt(PV_SAVE_REGS
+				  PARAVIRT_CALL
+				  PV_RESTORE_REGS)
+		     : "=a"(f)
+		     : paravirt_type(pv_irq_ops.save_fl),
+		       paravirt_clobber(CLBR_EAX)
+		     : "memory", "cc" PV_VEXTRA_CLOBBERS);
+	return f;
+}
+
+static inline void raw_local_irq_restore(unsigned long f)
+{
+	asm volatile(paravirt_alt(PV_SAVE_REGS
+				  PARAVIRT_CALL
+				  PV_RESTORE_REGS)
+		     : "=a"(f)
+		     : PV_FLAGS_ARG(f),
+		       paravirt_type(pv_irq_ops.restore_fl),
+		       paravirt_clobber(CLBR_EAX)
+		     : "memory", "cc" PV_EXTRA_CLOBBERS);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	asm volatile(paravirt_alt(PV_SAVE_REGS
+				  PARAVIRT_CALL
+				  PV_RESTORE_REGS)
+		     :
+		     : paravirt_type(pv_irq_ops.irq_disable),
+		       paravirt_clobber(CLBR_EAX)
+		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	asm volatile(paravirt_alt(PV_SAVE_REGS
+				  PARAVIRT_CALL
+				  PV_RESTORE_REGS)
+		     :
+		     : paravirt_type(pv_irq_ops.irq_enable),
+		       paravirt_clobber(CLBR_EAX)
+		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long f;
+
+	f = __raw_local_save_flags();
+	raw_local_irq_disable();
+	return f;
+}
+
+
+/* Make sure as little as possible of this mess escapes. */
+#undef PARAVIRT_CALL
+#undef __PVOP_CALL
+#undef __PVOP_VCALL
+#undef PVOP_VCALL0
+#undef PVOP_CALL0
+#undef PVOP_VCALL1
+#undef PVOP_CALL1
+#undef PVOP_VCALL2
+#undef PVOP_CALL2
+#undef PVOP_VCALL3
+#undef PVOP_CALL3
+#undef PVOP_VCALL4
+#undef PVOP_CALL4
+
+#else  /* __ASSEMBLY__ */
+
+#define _PVSITE(ptype, clobbers, ops, word, algn)	\
+771:;						\
+	ops;					\
+772:;						\
+	.pushsection .parainstructions,"a";	\
+	 .align	algn;				\
+	 word 771b;				\
+	 .byte ptype;				\
+	 .byte 772b-771b;			\
+	 .short clobbers;			\
+	.popsection
+
+
+#ifdef CONFIG_X86_64
+#define PV_SAVE_REGS				\
+	push %rax;				\
+	push %rcx;				\
+	push %rdx;				\
+	push %rsi;				\
+	push %rdi;				\
+	push %r8;				\
+	push %r9;				\
+	push %r10;				\
+	push %r11
+#define PV_RESTORE_REGS				\
+	pop %r11;				\
+	pop %r10;				\
+	pop %r9;				\
+	pop %r8;				\
+	pop %rdi;				\
+	pop %rsi;				\
+	pop %rdx;				\
+	pop %rcx;				\
+	pop %rax
+#define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 8)
+#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
+#define PARA_INDIRECT(addr)	*addr(%rip)
+#else
+#define PV_SAVE_REGS   pushl %eax; pushl %edi; pushl %ecx; pushl %edx
+#define PV_RESTORE_REGS popl %edx; popl %ecx; popl %edi; popl %eax
+#define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 4)
+#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
+#define PARA_INDIRECT(addr)	*%cs:addr
+#endif
+
+#define INTERRUPT_RETURN						\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_iret), CLBR_NONE,	\
+		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_iret))
+
+#define DISABLE_INTERRUPTS(clobbers)					\
+	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
+		  PV_SAVE_REGS;						\
+		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable);	\
+		  PV_RESTORE_REGS;)			\
+
+#define ENABLE_INTERRUPTS(clobbers)					\
+	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers,	\
+		  PV_SAVE_REGS;						\
+		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable);	\
+		  PV_RESTORE_REGS;)
+
+#define USERGS_SYSRET32							\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32),	\
+		  CLBR_NONE,						\
+		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret32))
+
+#ifdef CONFIG_X86_32
+#define GET_CR0_INTO_EAX				\
+	push %ecx; push %edx;				\
+	call PARA_INDIRECT(pv_cpu_ops+PV_CPU_read_cr0);	\
+	pop %edx; pop %ecx
+
+#define ENABLE_INTERRUPTS_SYSEXIT					\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit),	\
+		  CLBR_NONE,						\
+		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_irq_enable_sysexit))
+
+
+#else	/* !CONFIG_X86_32 */
+
+/*
+ * If swapgs is used while the userspace stack is still current,
+ * there's no way to call a pvop.  The PV replacement *must* be
+ * inlined, or the swapgs instruction must be trapped and emulated.
+ */
+#define SWAPGS_UNSAFE_STACK						\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
+		  swapgs)
+
+#define SWAPGS								\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
+		  PV_SAVE_REGS;						\
+		  call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs);		\
+		  PV_RESTORE_REGS					\
+		 )
+
+#define GET_CR2_INTO_RCX				\
+	call PARA_INDIRECT(pv_mmu_ops+PV_MMU_read_cr2);	\
+	movq %rax, %rcx;				\
+	xorq %rax, %rax;
+
+#define PARAVIRT_ADJUST_EXCEPTION_FRAME					\
+	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_adjust_exception_frame), \
+		  CLBR_NONE,						\
+		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_adjust_exception_frame))
+
+#define USERGS_SYSRET64							\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret64),	\
+		  CLBR_NONE,						\
+		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret64))
+
+#define ENABLE_INTERRUPTS_SYSEXIT32					\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit),	\
+		  CLBR_NONE,						\
+		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_irq_enable_sysexit))
+#endif	/* CONFIG_X86_32 */
+
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_PARAVIRT */
+#endif /* _ASM_X86_PARAVIRT_H */
diff --git a/arch/x86/include/asm/parport.h b/arch/x86/include/asm/parport.h
new file mode 100644
index 0000000..3c4ffeb
--- /dev/null
+++ b/arch/x86/include/asm/parport.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_PARPORT_H
+#define _ASM_X86_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* _ASM_X86_PARPORT_H */
diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
new file mode 100644
index 0000000..b8493b3
--- /dev/null
+++ b/arch/x86/include/asm/pat.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_X86_PAT_H
+#define _ASM_X86_PAT_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_X86_PAT
+extern int pat_enabled;
+extern void validate_pat_support(struct cpuinfo_x86 *c);
+#else
+static const int pat_enabled;
+static inline void validate_pat_support(struct cpuinfo_x86 *c) { }
+#endif
+
+extern void pat_init(void);
+
+extern int reserve_memtype(u64 start, u64 end,
+		unsigned long req_type, unsigned long *ret_type);
+extern int free_memtype(u64 start, u64 end);
+
+extern void pat_disable(char *reason);
+
+#endif /* _ASM_X86_PAT_H */
diff --git a/arch/x86/include/asm/pci-direct.h b/arch/x86/include/asm/pci-direct.h
new file mode 100644
index 0000000..b1e7a45
--- /dev/null
+++ b/arch/x86/include/asm/pci-direct.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_PCI_DIRECT_H
+#define _ASM_X86_PCI_DIRECT_H
+
+#include <linux/types.h>
+
+/* Direct PCI access. This is used for PCI accesses in early boot before
+   the PCI subsystem works. */
+
+extern u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset);
+extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset);
+extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset);
+extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val);
+extern void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val);
+extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val);
+
+extern int early_pci_allowed(void);
+
+extern unsigned int pci_early_dump_regs;
+extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
+extern void early_dump_pci_devices(void);
+#endif /* _ASM_X86_PCI_DIRECT_H */
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
new file mode 100644
index 0000000..875b38e
--- /dev/null
+++ b/arch/x86/include/asm/pci.h
@@ -0,0 +1,114 @@
+#ifndef _ASM_X86_PCI_H
+#define _ASM_X86_PCI_H
+
+#include <linux/mm.h> /* for struct page */
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+#ifdef __KERNEL__
+
+struct pci_sysdata {
+	int		domain;		/* PCI domain */
+	int		node;		/* NUMA node */
+#ifdef CONFIG_X86_64
+	void		*iommu;		/* IOMMU private data */
+#endif
+};
+
+extern int pci_routeirq;
+
+/* scan a bus after allocating a pci_sysdata for it */
+extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops,
+					    int node);
+extern struct pci_bus *pci_scan_bus_with_sysdata(int busno);
+
+static inline int pci_domain_nr(struct pci_bus *bus)
+{
+	struct pci_sysdata *sd = bus->sysdata;
+	return sd->domain;
+}
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return pci_domain_nr(bus);
+}
+
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+extern unsigned int pcibios_assign_all_busses(void);
+#else
+#define pcibios_assign_all_busses()	0
+#endif
+#define pcibios_scan_all_fns(a, b)	0
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		(pci_mem_start)
+
+#define PCIBIOS_MIN_CARDBUS_IO	0x4000
+
+void pcibios_config_init(void);
+struct pci_bus *pcibios_scan_root(int bus);
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq, int active);
+struct irq_routing_table *pcibios_get_irq_routing_table(void);
+int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state,
+			       int write_combine);
+
+
+#ifdef CONFIG_PCI
+extern void early_quirks(void);
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#else
+static inline void early_quirks(void) { }
+#endif
+
+#endif  /* __KERNEL__ */
+
+#ifdef CONFIG_X86_32
+# include "pci_32.h"
+#else
+# include "pci_64.h"
+#endif
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#ifdef CONFIG_NUMA
+/* Returns the node based on pci bus */
+static inline int __pcibus_to_node(struct pci_bus *bus)
+{
+	struct pci_sysdata *sd = bus->sysdata;
+
+	return sd->node;
+}
+
+static inline cpumask_t __pcibus_to_cpumask(struct pci_bus *bus)
+{
+	return node_to_cpumask(__pcibus_to_node(bus));
+}
+#endif
+
+#endif /* _ASM_X86_PCI_H */
diff --git a/arch/x86/include/asm/pci_32.h b/arch/x86/include/asm/pci_32.h
new file mode 100644
index 0000000..6f1213a
--- /dev/null
+++ b/arch/x86/include/asm/pci_32.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_X86_PCI_32_H
+#define _ASM_X86_PCI_32_H
+
+
+#ifdef __KERNEL__
+
+
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME[0];
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)	unsigned LEN_NAME[0];
+#define pci_unmap_addr(PTR, ADDR_NAME)	sizeof((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
+	do { break; } while (pci_unmap_addr(PTR, ADDR_NAME))
+#define pci_unmap_len(PTR, LEN_NAME)		sizeof((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
+	do { break; } while (pci_unmap_len(PTR, LEN_NAME))
+
+
+#endif /* __KERNEL__ */
+
+
+#endif /* _ASM_X86_PCI_32_H */
diff --git a/arch/x86/include/asm/pci_64.h b/arch/x86/include/asm/pci_64.h
new file mode 100644
index 0000000..5b28995
--- /dev/null
+++ b/arch/x86/include/asm/pci_64.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_X86_PCI_64_H
+#define _ASM_X86_PCI_64_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_CALGARY_IOMMU
+static inline void *pci_iommu(struct pci_bus *bus)
+{
+	struct pci_sysdata *sd = bus->sysdata;
+	return sd->iommu;
+}
+
+static inline void set_pci_iommu(struct pci_bus *bus, void *val)
+{
+	struct pci_sysdata *sd = bus->sysdata;
+	sd->iommu = val;
+}
+#endif /* CONFIG_CALGARY_IOMMU */
+
+extern int (*pci_config_read)(int seg, int bus, int dev, int fn,
+			      int reg, int len, u32 *value);
+extern int (*pci_config_write)(int seg, int bus, int dev, int fn,
+			       int reg, int len, u32 value);
+
+extern void dma32_reserve_bootmem(void);
+extern void pci_iommu_alloc(void);
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions
+ *
+ * On AMD64 it mostly equals, but we set it to zero if a hardware
+ * IOMMU (gart) of sotware IOMMU (swiotlb) is available.
+ */
+#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
+
+#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+#else
+/* No IOMMU */
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_PCI_64_H */
diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
new file mode 100644
index 0000000..2fbfff8
--- /dev/null
+++ b/arch/x86/include/asm/pda.h
@@ -0,0 +1,137 @@
+#ifndef _ASM_X86_PDA_H
+#define _ASM_X86_PDA_H
+
+#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <asm/page.h>
+
+/* Per processor datastructure. %gs points to it while the kernel runs */
+struct x8664_pda {
+	struct task_struct *pcurrent;	/* 0  Current process */
+	unsigned long data_offset;	/* 8 Per cpu data offset from linker
+					   address */
+	unsigned long kernelstack;	/* 16 top of kernel stack for current */
+	unsigned long oldrsp;		/* 24 user rsp for system call */
+	int irqcount;			/* 32 Irq nesting counter. Starts -1 */
+	unsigned int cpunumber;		/* 36 Logical CPU number */
+#ifdef CONFIG_CC_STACKPROTECTOR
+	unsigned long stack_canary;	/* 40 stack canary value */
+					/* gcc-ABI: this canary MUST be at
+					   offset 40!!! */
+#endif
+	char *irqstackptr;
+	short nodenumber;		/* number of current node (32k max) */
+	short in_bootmem;		/* pda lives in bootmem */
+	unsigned int __softirq_pending;
+	unsigned int __nmi_count;	/* number of NMI on this CPUs */
+	short mmu_state;
+	short isidle;
+	struct mm_struct *active_mm;
+	unsigned apic_timer_irqs;
+	unsigned irq0_irqs;
+	unsigned irq_resched_count;
+	unsigned irq_call_count;
+	unsigned irq_tlb_count;
+	unsigned irq_thermal_count;
+	unsigned irq_threshold_count;
+	unsigned irq_spurious_count;
+} ____cacheline_aligned_in_smp;
+
+extern struct x8664_pda **_cpu_pda;
+extern void pda_init(int);
+
+#define cpu_pda(i) (_cpu_pda[i])
+
+/*
+ * There is no fast way to get the base address of the PDA, all the accesses
+ * have to mention %fs/%gs.  So it needs to be done this Torvaldian way.
+ */
+extern void __bad_pda_field(void) __attribute__((noreturn));
+
+/*
+ * proxy_pda doesn't actually exist, but tell gcc it is accessed for
+ * all PDA accesses so it gets read/write dependencies right.
+ */
+extern struct x8664_pda _proxy_pda;
+
+#define pda_offset(field) offsetof(struct x8664_pda, field)
+
+#define pda_to_op(op, field, val)					\
+do {									\
+	typedef typeof(_proxy_pda.field) T__;				\
+	if (0) { T__ tmp__; tmp__ = (val); }	/* type checking */	\
+	switch (sizeof(_proxy_pda.field)) {				\
+	case 2:								\
+		asm(op "w %1,%%gs:%c2" :				\
+		    "+m" (_proxy_pda.field) :				\
+		    "ri" ((T__)val),					\
+		    "i"(pda_offset(field)));				\
+		break;							\
+	case 4:								\
+		asm(op "l %1,%%gs:%c2" :				\
+		    "+m" (_proxy_pda.field) :				\
+		    "ri" ((T__)val),					\
+		    "i" (pda_offset(field)));				\
+		break;							\
+	case 8:								\
+		asm(op "q %1,%%gs:%c2":					\
+		    "+m" (_proxy_pda.field) :				\
+		    "ri" ((T__)val),					\
+		    "i"(pda_offset(field)));				\
+		break;							\
+	default:							\
+		__bad_pda_field();					\
+	}								\
+} while (0)
+
+#define pda_from_op(op, field)			\
+({						\
+	typeof(_proxy_pda.field) ret__;		\
+	switch (sizeof(_proxy_pda.field)) {	\
+	case 2:					\
+		asm(op "w %%gs:%c1,%0" :	\
+		    "=r" (ret__) :		\
+		    "i" (pda_offset(field)),	\
+		    "m" (_proxy_pda.field));	\
+		break;				\
+	case 4:					\
+		asm(op "l %%gs:%c1,%0":		\
+		    "=r" (ret__):		\
+		    "i" (pda_offset(field)),	\
+		    "m" (_proxy_pda.field));	\
+		break;				\
+	case 8:					\
+		asm(op "q %%gs:%c1,%0":		\
+		    "=r" (ret__) :		\
+		    "i" (pda_offset(field)),	\
+		    "m" (_proxy_pda.field));	\
+		break;				\
+	default:				\
+		__bad_pda_field();		\
+	}					\
+	ret__;					\
+})
+
+#define read_pda(field)		pda_from_op("mov", field)
+#define write_pda(field, val)	pda_to_op("mov", field, val)
+#define add_pda(field, val)	pda_to_op("add", field, val)
+#define sub_pda(field, val)	pda_to_op("sub", field, val)
+#define or_pda(field, val)	pda_to_op("or", field, val)
+
+/* This is not atomic against other CPUs -- CPU preemption needs to be off */
+#define test_and_clear_bit_pda(bit, field)				\
+({									\
+	int old__;							\
+	asm volatile("btr %2,%%gs:%c3\n\tsbbl %0,%0"			\
+		     : "=r" (old__), "+m" (_proxy_pda.field)		\
+		     : "dIr" (bit), "i" (pda_offset(field)) : "memory");\
+	old__;								\
+})
+
+#endif
+
+#define PDA_STACKOFFSET (5*8)
+
+#endif /* _ASM_X86_PDA_H */
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
new file mode 100644
index 0000000..ece7205
--- /dev/null
+++ b/arch/x86/include/asm/percpu.h
@@ -0,0 +1,218 @@
+#ifndef _ASM_X86_PERCPU_H
+#define _ASM_X86_PERCPU_H
+
+#ifdef CONFIG_X86_64
+#include <linux/compiler.h>
+
+/* Same as asm-generic/percpu.h, except that we store the per cpu offset
+   in the PDA. Longer term the PDA and every per cpu variable
+   should be just put into a single section and referenced directly
+   from %gs */
+
+#ifdef CONFIG_SMP
+#include <asm/pda.h>
+
+#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
+#define __my_cpu_offset read_pda(data_offset)
+
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#endif
+#include <asm-generic/percpu.h>
+
+DECLARE_PER_CPU(struct x8664_pda, pda);
+
+/*
+ * These are supposed to be implemented as a single instruction which
+ * operates on the per-cpu data base segment.  x86-64 doesn't have
+ * that yet, so this is a fairly inefficient workaround for the
+ * meantime.  The single instruction is atomic with respect to
+ * preemption and interrupts, so we need to explicitly disable
+ * interrupts here to achieve the same effect.  However, because it
+ * can be used from within interrupt-disable/enable, we can't actually
+ * disable interrupts; disabling preemption is enough.
+ */
+#define x86_read_percpu(var)						\
+	({								\
+		typeof(per_cpu_var(var)) __tmp;				\
+		preempt_disable();					\
+		__tmp = __get_cpu_var(var);				\
+		preempt_enable();					\
+		__tmp;							\
+	})
+
+#define x86_write_percpu(var, val)					\
+	do {								\
+		preempt_disable();					\
+		__get_cpu_var(var) = (val);				\
+		preempt_enable();					\
+	} while(0)
+
+#else /* CONFIG_X86_64 */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ *    var - variable name
+ *    reg - 32bit register
+ *
+ * The resulting address is stored in the "reg" argument.
+ *
+ * Example:
+ *    PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+#define PER_CPU(var, reg)				\
+	movl %fs:per_cpu__##this_cpu_off, reg;		\
+	lea per_cpu__##var(reg), reg
+#define PER_CPU_VAR(var)	%fs:per_cpu__##var
+#else /* ! SMP */
+#define PER_CPU(var, reg)			\
+	movl $per_cpu__##var, reg
+#define PER_CPU_VAR(var)	per_cpu__##var
+#endif	/* SMP */
+
+#else /* ...!ASSEMBLY */
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ *    var - variable name
+ *    cpu - 32bit register containing the current CPU number
+ *
+ * The resulting address is stored in the "cpu" argument.
+ *
+ * Example:
+ *    PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+
+#define __my_cpu_offset x86_read_percpu(this_cpu_off)
+
+/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
+#define __percpu_seg "%%fs:"
+
+#else  /* !SMP */
+
+#define __percpu_seg ""
+
+#endif	/* SMP */
+
+#include <asm-generic/percpu.h>
+
+/* We can use this directly for local CPU (faster). */
+DECLARE_PER_CPU(unsigned long, this_cpu_off);
+
+/* For arch-specific code, we can use direct single-insn ops (they
+ * don't give an lvalue though). */
+extern void __bad_percpu_size(void);
+
+#define percpu_to_op(op, var, val)			\
+do {							\
+	typedef typeof(var) T__;			\
+	if (0) {					\
+		T__ tmp__;				\
+		tmp__ = (val);				\
+	}						\
+	switch (sizeof(var)) {				\
+	case 1:						\
+		asm(op "b %1,"__percpu_seg"%0"		\
+		    : "+m" (var)			\
+		    : "ri" ((T__)val));			\
+		break;					\
+	case 2:						\
+		asm(op "w %1,"__percpu_seg"%0"		\
+		    : "+m" (var)			\
+		    : "ri" ((T__)val));			\
+		break;					\
+	case 4:						\
+		asm(op "l %1,"__percpu_seg"%0"		\
+		    : "+m" (var)			\
+		    : "ri" ((T__)val));			\
+		break;					\
+	default: __bad_percpu_size();			\
+	}						\
+} while (0)
+
+#define percpu_from_op(op, var)				\
+({							\
+	typeof(var) ret__;				\
+	switch (sizeof(var)) {				\
+	case 1:						\
+		asm(op "b "__percpu_seg"%1,%0"		\
+		    : "=r" (ret__)			\
+		    : "m" (var));			\
+		break;					\
+	case 2:						\
+		asm(op "w "__percpu_seg"%1,%0"		\
+		    : "=r" (ret__)			\
+		    : "m" (var));			\
+		break;					\
+	case 4:						\
+		asm(op "l "__percpu_seg"%1,%0"		\
+		    : "=r" (ret__)			\
+		    : "m" (var));			\
+		break;					\
+	default: __bad_percpu_size();			\
+	}						\
+	ret__;						\
+})
+
+#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
+#define x86_write_percpu(var, val) percpu_to_op("mov", per_cpu__##var, val)
+#define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val)
+#define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val)
+#define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val)
+#endif /* !__ASSEMBLY__ */
+#endif /* !CONFIG_X86_64 */
+
+#ifdef CONFIG_SMP
+
+/*
+ * Define the "EARLY_PER_CPU" macros.  These are used for some per_cpu
+ * variables that are initialized and accessed before there are per_cpu
+ * areas allocated.
+ */
+
+#define	DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)			\
+	DEFINE_PER_CPU(_type, _name) = _initvalue;			\
+	__typeof__(_type) _name##_early_map[NR_CPUS] __initdata =	\
+				{ [0 ... NR_CPUS-1] = _initvalue };	\
+	__typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
+
+#define EXPORT_EARLY_PER_CPU_SYMBOL(_name)			\
+	EXPORT_PER_CPU_SYMBOL(_name)
+
+#define DECLARE_EARLY_PER_CPU(_type, _name)			\
+	DECLARE_PER_CPU(_type, _name);				\
+	extern __typeof__(_type) *_name##_early_ptr;		\
+	extern __typeof__(_type)  _name##_early_map[]
+
+#define	early_per_cpu_ptr(_name) (_name##_early_ptr)
+#define	early_per_cpu_map(_name, _idx) (_name##_early_map[_idx])
+#define	early_per_cpu(_name, _cpu) 				\
+	(early_per_cpu_ptr(_name) ?				\
+		early_per_cpu_ptr(_name)[_cpu] :		\
+		per_cpu(_name, _cpu))
+
+#else	/* !CONFIG_SMP */
+#define	DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)		\
+	DEFINE_PER_CPU(_type, _name) = _initvalue
+
+#define EXPORT_EARLY_PER_CPU_SYMBOL(_name)			\
+	EXPORT_PER_CPU_SYMBOL(_name)
+
+#define DECLARE_EARLY_PER_CPU(_type, _name)			\
+	DECLARE_PER_CPU(_type, _name)
+
+#define	early_per_cpu(_name, _cpu) per_cpu(_name, _cpu)
+#define	early_per_cpu_ptr(_name) NULL
+/* no early_per_cpu_map() */
+
+#endif	/* !CONFIG_SMP */
+
+#endif /* _ASM_X86_PERCPU_H */
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
new file mode 100644
index 0000000..cb7c151
--- /dev/null
+++ b/arch/x86/include/asm/pgalloc.h
@@ -0,0 +1,114 @@
+#ifndef _ASM_X86_PGALLOC_H
+#define _ASM_X86_PGALLOC_H
+
+#include <linux/threads.h>
+#include <linux/mm.h>		/* for struct page */
+#include <linux/pagemap.h>
+
+static inline int  __paravirt_pgd_alloc(struct mm_struct *mm) { return 0; }
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define paravirt_pgd_alloc(mm)	__paravirt_pgd_alloc(mm)
+static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *pgd) {}
+static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned long pfn)	{}
+static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned long pfn)	{}
+static inline void paravirt_alloc_pmd_clone(unsigned long pfn, unsigned long clonepfn,
+					    unsigned long start, unsigned long count) {}
+static inline void paravirt_alloc_pud(struct mm_struct *mm, unsigned long pfn)	{}
+static inline void paravirt_release_pte(unsigned long pfn) {}
+static inline void paravirt_release_pmd(unsigned long pfn) {}
+static inline void paravirt_release_pud(unsigned long pfn) {}
+#endif
+
+/*
+ * Allocate and free page tables.
+ */
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
+
+/* Should really implement gc for free page table pages. This could be
+   done with a reference count in struct page. */
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	BUG_ON((unsigned long)pte & (PAGE_SIZE-1));
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+	__free_page(pte);
+}
+
+extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+
+static inline void pmd_populate_kernel(struct mm_struct *mm,
+				       pmd_t *pmd, pte_t *pte)
+{
+	paravirt_alloc_pte(mm, __pa(pte) >> PAGE_SHIFT);
+	set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				struct page *pte)
+{
+	unsigned long pfn = page_to_pfn(pte);
+
+	paravirt_alloc_pte(mm, pfn);
+	set_pmd(pmd, __pmd(((pteval_t)pfn << PAGE_SHIFT) | _PAGE_TABLE));
+}
+
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#if PAGETABLE_LEVELS > 2
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
+	free_page((unsigned long)pmd);
+}
+
+extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+
+#ifdef CONFIG_X86_PAE
+extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
+#else	/* !CONFIG_X86_PAE */
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	paravirt_alloc_pmd(mm, __pa(pmd) >> PAGE_SHIFT);
+	set_pud(pud, __pud(_PAGE_TABLE | __pa(pmd)));
+}
+#endif	/* CONFIG_X86_PAE */
+
+#if PAGETABLE_LEVELS > 3
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+{
+	paravirt_alloc_pud(mm, __pa(pud) >> PAGE_SHIFT);
+	set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)));
+}
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return (pud_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pud_free(struct mm_struct *mm, pud_t *pud)
+{
+	BUG_ON((unsigned long)pud & (PAGE_SIZE-1));
+	free_page((unsigned long)pud);
+}
+
+extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+#endif	/* PAGETABLE_LEVELS > 3 */
+#endif	/* PAGETABLE_LEVELS > 2 */
+
+#endif /* _ASM_X86_PGALLOC_H */
diff --git a/arch/x86/include/asm/pgtable-2level-defs.h b/arch/x86/include/asm/pgtable-2level-defs.h
new file mode 100644
index 0000000..d77db89
--- /dev/null
+++ b/arch/x86/include/asm/pgtable-2level-defs.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_PGTABLE_2LEVEL_DEFS_H
+#define _ASM_X86_PGTABLE_2LEVEL_DEFS_H
+
+#define SHARED_KERNEL_PMD	0
+
+/*
+ * traditional i386 two-level paging structure:
+ */
+
+#define PGDIR_SHIFT	22
+#define PTRS_PER_PGD	1024
+
+/*
+ * the i386 is two-level, so we don't really have any
+ * PMD directory physically.
+ */
+
+#define PTRS_PER_PTE	1024
+
+#endif /* _ASM_X86_PGTABLE_2LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable-2level.h b/arch/x86/include/asm/pgtable-2level.h
new file mode 100644
index 0000000..b17edfd
--- /dev/null
+++ b/arch/x86/include/asm/pgtable-2level.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_X86_PGTABLE_2LEVEL_H
+#define _ASM_X86_PGTABLE_2LEVEL_H
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+static inline void native_set_pte(pte_t *ptep , pte_t pte)
+{
+	*ptep = pte;
+}
+
+static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+	*pmdp = pmd;
+}
+
+static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	native_set_pte(ptep, pte);
+}
+
+static inline void native_set_pte_present(struct mm_struct *mm,
+					  unsigned long addr,
+					  pte_t *ptep, pte_t pte)
+{
+	native_set_pte(ptep, pte);
+}
+
+static inline void native_pmd_clear(pmd_t *pmdp)
+{
+	native_set_pmd(pmdp, __pmd(0));
+}
+
+static inline void native_pte_clear(struct mm_struct *mm,
+				    unsigned long addr, pte_t *xp)
+{
+	*xp = native_make_pte(0);
+}
+
+#ifdef CONFIG_SMP
+static inline pte_t native_ptep_get_and_clear(pte_t *xp)
+{
+	return __pte(xchg(&xp->pte_low, 0));
+}
+#else
+#define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
+#endif
+
+#define pte_none(x)		(!(x).pte_low)
+
+/*
+ * Bits 0, 6 and 7 are taken, split up the 29 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS	29
+
+#define pte_to_pgoff(pte)						\
+	((((pte).pte_low >> 1) & 0x1f) + (((pte).pte_low >> 8) << 5))
+
+#define pgoff_to_pte(off)						\
+	((pte_t) { .pte_low = (((off) & 0x1f) << 1) +			\
+			(((off) >> 5) << 8) + _PAGE_FILE })
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 1) & 0x1f)
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)				\
+	((swp_entry_t) { ((type) << 1) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { (pte).pte_low })
+#define __swp_entry_to_pte(x)		((pte_t) { .pte = (x).val })
+
+#endif /* _ASM_X86_PGTABLE_2LEVEL_H */
diff --git a/arch/x86/include/asm/pgtable-3level-defs.h b/arch/x86/include/asm/pgtable-3level-defs.h
new file mode 100644
index 0000000..6256136
--- /dev/null
+++ b/arch/x86/include/asm/pgtable-3level-defs.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_X86_PGTABLE_3LEVEL_DEFS_H
+#define _ASM_X86_PGTABLE_3LEVEL_DEFS_H
+
+#ifdef CONFIG_PARAVIRT
+#define SHARED_KERNEL_PMD	(pv_info.shared_kernel_pmd)
+#else
+#define SHARED_KERNEL_PMD	1
+#endif
+
+/*
+ * PGDIR_SHIFT determines what a top-level page table entry can map
+ */
+#define PGDIR_SHIFT	30
+#define PTRS_PER_PGD	4
+
+/*
+ * PMD_SHIFT determines the size of the area a middle-level
+ * page table can map
+ */
+#define PMD_SHIFT	21
+#define PTRS_PER_PMD	512
+
+/*
+ * entries per page directory level
+ */
+#define PTRS_PER_PTE	512
+
+#endif /* _ASM_X86_PGTABLE_3LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
new file mode 100644
index 0000000..fb16cec
--- /dev/null
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -0,0 +1,175 @@
+#ifndef _ASM_X86_PGTABLE_3LEVEL_H
+#define _ASM_X86_PGTABLE_3LEVEL_H
+
+/*
+ * Intel Physical Address Extension (PAE) Mode - three-level page
+ * tables on PPro+ CPUs.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#define pte_ERROR(e)							\
+	printk("%s:%d: bad pte %p(%08lx%08lx).\n",			\
+	       __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
+#define pmd_ERROR(e)							\
+	printk("%s:%d: bad pmd %p(%016Lx).\n",				\
+	       __FILE__, __LINE__, &(e), pmd_val(e))
+#define pgd_ERROR(e)							\
+	printk("%s:%d: bad pgd %p(%016Lx).\n",				\
+	       __FILE__, __LINE__, &(e), pgd_val(e))
+
+static inline int pud_none(pud_t pud)
+{
+	return pud_val(pud) == 0;
+}
+
+static inline int pud_bad(pud_t pud)
+{
+	return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
+}
+
+static inline int pud_present(pud_t pud)
+{
+	return pud_val(pud) & _PAGE_PRESENT;
+}
+
+/* Rules for using set_pte: the pte being assigned *must* be
+ * either not present or in a state where the hardware will
+ * not attempt to update the pte.  In places where this is
+ * not possible, use pte_get_and_clear to obtain the old pte
+ * value and then use set_pte to update it.  -ben
+ */
+static inline void native_set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+
+/*
+ * Since this is only called on user PTEs, and the page fault handler
+ * must handle the already racy situation of simultaneous page faults,
+ * we are justified in merely clearing the PTE present bit, followed
+ * by a set.  The ordering here is important.
+ */
+static inline void native_set_pte_present(struct mm_struct *mm,
+					  unsigned long addr,
+					  pte_t *ptep, pte_t pte)
+{
+	ptep->pte_low = 0;
+	smp_wmb();
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+
+static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	set_64bit((unsigned long long *)(ptep), native_pte_val(pte));
+}
+
+static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+	set_64bit((unsigned long long *)(pmdp), native_pmd_val(pmd));
+}
+
+static inline void native_set_pud(pud_t *pudp, pud_t pud)
+{
+	set_64bit((unsigned long long *)(pudp), native_pud_val(pud));
+}
+
+/*
+ * For PTEs and PDEs, we must clear the P-bit first when clearing a page table
+ * entry, so clear the bottom half first and enforce ordering with a compiler
+ * barrier.
+ */
+static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
+				    pte_t *ptep)
+{
+	ptep->pte_low = 0;
+	smp_wmb();
+	ptep->pte_high = 0;
+}
+
+static inline void native_pmd_clear(pmd_t *pmd)
+{
+	u32 *tmp = (u32 *)pmd;
+	*tmp = 0;
+	smp_wmb();
+	*(tmp + 1) = 0;
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	unsigned long pgd;
+
+	set_pud(pudp, __pud(0));
+
+	/*
+	 * According to Intel App note "TLBs, Paging-Structure Caches,
+	 * and Their Invalidation", April 2007, document 317080-001,
+	 * section 8.1: in PAE mode we explicitly have to flush the
+	 * TLB via cr3 if the top-level pgd is changed...
+	 *
+	 * Make sure the pud entry we're updating is within the
+	 * current pgd to avoid unnecessary TLB flushes.
+	 */
+	pgd = read_cr3();
+	if (__pa(pudp) >= pgd && __pa(pudp) <
+	    (pgd + sizeof(pgd_t)*PTRS_PER_PGD))
+		write_cr3(pgd);
+}
+
+#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_PFN_MASK))
+
+#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_PFN_MASK))
+
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pud, address) ((pmd_t *)pud_page(*(pud)) +	\
+				  pmd_index(address))
+
+#ifdef CONFIG_SMP
+static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
+{
+	pte_t res;
+
+	/* xchg acts as a barrier before the setting of the high bits */
+	res.pte_low = xchg(&ptep->pte_low, 0);
+	res.pte_high = ptep->pte_high;
+	ptep->pte_high = 0;
+
+	return res;
+}
+#else
+#define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
+#endif
+
+#define __HAVE_ARCH_PTE_SAME
+static inline int pte_same(pte_t a, pte_t b)
+{
+	return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
+}
+
+static inline int pte_none(pte_t pte)
+{
+	return !pte.pte_low && !pte.pte_high;
+}
+
+/*
+ * Bits 0, 6 and 7 are taken in the low part of the pte,
+ * put the 32 bits of offset into the high part.
+ */
+#define pte_to_pgoff(pte) ((pte).pte_high)
+#define pgoff_to_pte(off)						\
+	((pte_t) { { .pte_low = _PAGE_FILE, .pte_high = (off) } })
+#define PTE_FILE_MAX_BITS       32
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val) & 0x1f)
+#define __swp_offset(x)			((x).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t){(type) | (offset) << 5})
+#define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
+#define __swp_entry_to_pte(x)		((pte_t){ { .pte_high = (x).val } })
+
+#endif /* _ASM_X86_PGTABLE_3LEVEL_H */
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
new file mode 100644
index 0000000..c012f3b
--- /dev/null
+++ b/arch/x86/include/asm/pgtable.h
@@ -0,0 +1,562 @@
+#ifndef _ASM_X86_PGTABLE_H
+#define _ASM_X86_PGTABLE_H
+
+#define FIRST_USER_ADDRESS	0
+
+#define _PAGE_BIT_PRESENT	0	/* is present */
+#define _PAGE_BIT_RW		1	/* writeable */
+#define _PAGE_BIT_USER		2	/* userspace addressable */
+#define _PAGE_BIT_PWT		3	/* page write through */
+#define _PAGE_BIT_PCD		4	/* page cache disabled */
+#define _PAGE_BIT_ACCESSED	5	/* was accessed (raised by CPU) */
+#define _PAGE_BIT_DIRTY		6	/* was written to (raised by CPU) */
+#define _PAGE_BIT_FILE		6
+#define _PAGE_BIT_PSE		7	/* 4 MB (or 2MB) page */
+#define _PAGE_BIT_PAT		7	/* on 4KB pages */
+#define _PAGE_BIT_GLOBAL	8	/* Global TLB entry PPro+ */
+#define _PAGE_BIT_UNUSED1	9	/* available for programmer */
+#define _PAGE_BIT_IOMAP		10	/* flag used to indicate IO mapping */
+#define _PAGE_BIT_UNUSED3	11
+#define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
+#define _PAGE_BIT_SPECIAL	_PAGE_BIT_UNUSED1
+#define _PAGE_BIT_CPA_TEST	_PAGE_BIT_UNUSED1
+#define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
+
+#define _PAGE_PRESENT	(_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
+#define _PAGE_RW	(_AT(pteval_t, 1) << _PAGE_BIT_RW)
+#define _PAGE_USER	(_AT(pteval_t, 1) << _PAGE_BIT_USER)
+#define _PAGE_PWT	(_AT(pteval_t, 1) << _PAGE_BIT_PWT)
+#define _PAGE_PCD	(_AT(pteval_t, 1) << _PAGE_BIT_PCD)
+#define _PAGE_ACCESSED	(_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED)
+#define _PAGE_DIRTY	(_AT(pteval_t, 1) << _PAGE_BIT_DIRTY)
+#define _PAGE_PSE	(_AT(pteval_t, 1) << _PAGE_BIT_PSE)
+#define _PAGE_GLOBAL	(_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
+#define _PAGE_UNUSED1	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
+#define _PAGE_IOMAP	(_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
+#define _PAGE_UNUSED3	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
+#define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
+#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
+#define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
+#define _PAGE_CPA_TEST	(_AT(pteval_t, 1) << _PAGE_BIT_CPA_TEST)
+#define __HAVE_ARCH_PTE_SPECIAL
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+#define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
+#else
+#define _PAGE_NX	(_AT(pteval_t, 0))
+#endif
+
+/* If _PAGE_PRESENT is clear, we use these: */
+#define _PAGE_FILE	_PAGE_DIRTY	/* nonlinear file mapping,
+					 * saved PTE; unset:swap */
+#define _PAGE_PROTNONE	_PAGE_PSE	/* if the user mapped it with PROT_NONE;
+					   pte_present gives true */
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER |	\
+			 _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED |	\
+			 _PAGE_DIRTY)
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
+			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)
+#define _PAGE_CACHE_WB		(0)
+#define _PAGE_CACHE_WC		(_PAGE_PWT)
+#define _PAGE_CACHE_UC_MINUS	(_PAGE_PCD)
+#define _PAGE_CACHE_UC		(_PAGE_PCD | _PAGE_PWT)
+
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+				 _PAGE_ACCESSED | _PAGE_NX)
+
+#define PAGE_SHARED_EXEC	__pgprot(_PAGE_PRESENT | _PAGE_RW |	\
+					 _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY_NOEXEC	__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_COPY_EXEC		__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED)
+#define PAGE_COPY		PAGE_COPY_NOEXEC
+#define PAGE_READONLY		__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_READONLY_EXEC	__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED)
+
+#define __PAGE_KERNEL_EXEC						\
+	(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+#define __PAGE_KERNEL		(__PAGE_KERNEL_EXEC | _PAGE_NX)
+
+#define __PAGE_KERNEL_RO		(__PAGE_KERNEL & ~_PAGE_RW)
+#define __PAGE_KERNEL_RX		(__PAGE_KERNEL_EXEC & ~_PAGE_RW)
+#define __PAGE_KERNEL_EXEC_NOCACHE	(__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_WC		(__PAGE_KERNEL | _PAGE_CACHE_WC)
+#define __PAGE_KERNEL_NOCACHE		(__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_UC_MINUS		(__PAGE_KERNEL | _PAGE_PCD)
+#define __PAGE_KERNEL_VSYSCALL		(__PAGE_KERNEL_RX | _PAGE_USER)
+#define __PAGE_KERNEL_VSYSCALL_NOCACHE	(__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_LARGE		(__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_NOCACHE	(__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC	(__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define __PAGE_KERNEL_IO		(__PAGE_KERNEL | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_NOCACHE	(__PAGE_KERNEL_NOCACHE | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_UC_MINUS	(__PAGE_KERNEL_UC_MINUS | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_WC		(__PAGE_KERNEL_WC | _PAGE_IOMAP)
+
+#define PAGE_KERNEL			__pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO			__pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC		__pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_RX			__pgprot(__PAGE_KERNEL_RX)
+#define PAGE_KERNEL_WC			__pgprot(__PAGE_KERNEL_WC)
+#define PAGE_KERNEL_NOCACHE		__pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_UC_MINUS		__pgprot(__PAGE_KERNEL_UC_MINUS)
+#define PAGE_KERNEL_EXEC_NOCACHE	__pgprot(__PAGE_KERNEL_EXEC_NOCACHE)
+#define PAGE_KERNEL_LARGE		__pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_NOCACHE	__pgprot(__PAGE_KERNEL_LARGE_NOCACHE)
+#define PAGE_KERNEL_LARGE_EXEC		__pgprot(__PAGE_KERNEL_LARGE_EXEC)
+#define PAGE_KERNEL_VSYSCALL		__pgprot(__PAGE_KERNEL_VSYSCALL)
+#define PAGE_KERNEL_VSYSCALL_NOCACHE	__pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE)
+
+#define PAGE_KERNEL_IO			__pgprot(__PAGE_KERNEL_IO)
+#define PAGE_KERNEL_IO_NOCACHE		__pgprot(__PAGE_KERNEL_IO_NOCACHE)
+#define PAGE_KERNEL_IO_UC_MINUS		__pgprot(__PAGE_KERNEL_IO_UC_MINUS)
+#define PAGE_KERNEL_IO_WC		__pgprot(__PAGE_KERNEL_IO_WC)
+
+/*         xwr */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_EXEC
+#define __P101	PAGE_READONLY_EXEC
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_EXEC
+#define __S101	PAGE_READONLY_EXEC
+#define __S110	PAGE_SHARED_EXEC
+#define __S111	PAGE_SHARED_EXEC
+
+/*
+ * early identity mapping  pte attrib macros.
+ */
+#ifdef CONFIG_X86_64
+#define __PAGE_KERNEL_IDENT_LARGE_EXEC	__PAGE_KERNEL_LARGE_EXEC
+#else
+/*
+ * For PDE_IDENT_ATTR include USER bit. As the PDE and PTE protection
+ * bits are combined, this will alow user to access the high address mapped
+ * VDSO in the presence of CONFIG_COMPAT_VDSO
+ */
+#define PTE_IDENT_ATTR	 0x003		/* PRESENT+RW */
+#define PDE_IDENT_ATTR	 0x067		/* PRESENT+RW+USER+DIRTY+ACCESSED */
+#define PGD_IDENT_ATTR	 0x001		/* PRESENT (no other attributes) */
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+extern spinlock_t pgd_lock;
+extern struct list_head pgd_list;
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_DIRTY;
+}
+
+static inline int pte_young(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_ACCESSED;
+}
+
+static inline int pte_write(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_RW;
+}
+
+static inline int pte_file(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_FILE;
+}
+
+static inline int pte_huge(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_PSE;
+}
+
+static inline int pte_global(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_GLOBAL;
+}
+
+static inline int pte_exec(pte_t pte)
+{
+	return !(pte_flags(pte) & _PAGE_NX);
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_SPECIAL;
+}
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	return (pte_val(pte) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
+#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
+
+static inline int pmd_large(pmd_t pte)
+{
+	return (pmd_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+		(_PAGE_PSE | _PAGE_PRESENT);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_RW);
+}
+
+static inline pte_t pte_mkexec(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_NX);
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_RW);
+}
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_PSE);
+}
+
+static inline pte_t pte_clrhuge(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_PSE);
+}
+
+static inline pte_t pte_mkglobal(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_GLOBAL);
+}
+
+static inline pte_t pte_clrglobal(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_GLOBAL);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
+}
+
+extern pteval_t __supported_pte_mask;
+
+static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
+{
+	return __pte((((phys_addr_t)page_nr << PAGE_SHIFT) |
+		      pgprot_val(pgprot)) & __supported_pte_mask);
+}
+
+static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot)
+{
+	return __pmd((((phys_addr_t)page_nr << PAGE_SHIFT) |
+		      pgprot_val(pgprot)) & __supported_pte_mask);
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pteval_t val = pte_val(pte);
+
+	/*
+	 * Chop off the NX bit (if present), and add the NX portion of
+	 * the newprot (if present):
+	 */
+	val &= _PAGE_CHG_MASK;
+	val |= pgprot_val(newprot) & (~_PAGE_CHG_MASK) & __supported_pte_mask;
+
+	return __pte(val);
+}
+
+/* mprotect needs to preserve PAT bits when updating vm_page_prot */
+#define pgprot_modify pgprot_modify
+static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
+{
+	pgprotval_t preservebits = pgprot_val(oldprot) & _PAGE_CHG_MASK;
+	pgprotval_t addbits = pgprot_val(newprot);
+	return __pgprot(preservebits | addbits);
+}
+
+#define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK)
+
+#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
+
+#ifndef __ASSEMBLY__
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+                              unsigned long size, pgprot_t vma_prot);
+int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
+                              unsigned long size, pgprot_t *vma_prot);
+#endif
+
+/* Install a pte for a particular vaddr in kernel space. */
+void set_pte_vaddr(unsigned long vaddr, pte_t pte);
+
+#ifdef CONFIG_X86_32
+extern void native_pagetable_setup_start(pgd_t *base);
+extern void native_pagetable_setup_done(pgd_t *base);
+#else
+static inline void native_pagetable_setup_start(pgd_t *base) {}
+static inline void native_pagetable_setup_done(pgd_t *base) {}
+#endif
+
+struct seq_file;
+extern void arch_report_meminfo(struct seq_file *m);
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else  /* !CONFIG_PARAVIRT */
+#define set_pte(ptep, pte)		native_set_pte(ptep, pte)
+#define set_pte_at(mm, addr, ptep, pte)	native_set_pte_at(mm, addr, ptep, pte)
+
+#define set_pte_present(mm, addr, ptep, pte)				\
+	native_set_pte_present(mm, addr, ptep, pte)
+#define set_pte_atomic(ptep, pte)					\
+	native_set_pte_atomic(ptep, pte)
+
+#define set_pmd(pmdp, pmd)		native_set_pmd(pmdp, pmd)
+
+#ifndef __PAGETABLE_PUD_FOLDED
+#define set_pgd(pgdp, pgd)		native_set_pgd(pgdp, pgd)
+#define pgd_clear(pgd)			native_pgd_clear(pgd)
+#endif
+
+#ifndef set_pud
+# define set_pud(pudp, pud)		native_set_pud(pudp, pud)
+#endif
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define pud_clear(pud)			native_pud_clear(pud)
+#endif
+
+#define pte_clear(mm, addr, ptep)	native_pte_clear(mm, addr, ptep)
+#define pmd_clear(pmd)			native_pmd_clear(pmd)
+
+#define pte_update(mm, addr, ptep)              do { } while (0)
+#define pte_update_defer(mm, addr, ptep)        do { } while (0)
+
+static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
+{
+	native_pagetable_setup_start(base);
+}
+
+static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
+{
+	native_pagetable_setup_done(base);
+}
+#endif	/* CONFIG_PARAVIRT */
+
+#endif	/* __ASSEMBLY__ */
+
+#ifdef CONFIG_X86_32
+# include "pgtable_32.h"
+#else
+# include "pgtable_64.h"
+#endif
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index((address)))
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
+
+
+#define KERNEL_PGD_BOUNDARY	pgd_index(PAGE_OFFSET)
+#define KERNEL_PGD_PTRS		(PTRS_PER_PGD - KERNEL_PGD_BOUNDARY)
+
+#ifndef __ASSEMBLY__
+
+enum {
+	PG_LEVEL_NONE,
+	PG_LEVEL_4K,
+	PG_LEVEL_2M,
+	PG_LEVEL_1G,
+	PG_LEVEL_NUM
+};
+
+#ifdef CONFIG_PROC_FS
+extern void update_page_count(int level, unsigned long pages);
+#else
+static inline void update_page_count(int level, unsigned long pages) { }
+#endif
+
+/*
+ * Helper function that returns the kernel pagetable entry controlling
+ * the virtual address 'address'. NULL means no pagetable entry present.
+ * NOTE: the return type is pte_t but if the pmd is PSE then we return it
+ * as a pte too.
+ */
+extern pte_t *lookup_address(unsigned long address, unsigned int *level);
+
+/* local pte updates need not use xchg for locking */
+static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
+{
+	pte_t res = *ptep;
+
+	/* Pure native function needs no input for mm, addr */
+	native_pte_clear(NULL, 0, ptep);
+	return res;
+}
+
+static inline void native_set_pte_at(struct mm_struct *mm, unsigned long addr,
+				     pte_t *ptep , pte_t pte)
+{
+	native_set_pte(ptep, pte);
+}
+
+#ifndef CONFIG_PARAVIRT
+/*
+ * Rules for using pte_update - it must be called after any PTE update which
+ * has not been done using the set_pte / clear_pte interfaces.  It is used by
+ * shadow mode hypervisors to resynchronize the shadow page tables.  Kernel PTE
+ * updates should either be sets, clears, or set_pte_atomic for P->P
+ * transitions, which means this hook should only be called for user PTEs.
+ * This hook implies a P->P protection or access change has taken place, which
+ * requires a subsequent TLB flush.  The notification can optionally be delayed
+ * until the TLB flush event by using the pte_update_defer form of the
+ * interface, but care must be taken to assure that the flush happens while
+ * still holding the same page table lock so that the shadow and primary pages
+ * do not become out of sync on SMP.
+ */
+#define pte_update(mm, addr, ptep)		do { } while (0)
+#define pte_update_defer(mm, addr, ptep)	do { } while (0)
+#endif
+
+/*
+ * We only update the dirty/accessed state if we set
+ * the dirty bit by hand in the kernel, since the hardware
+ * will do the accessed bit for us, and we don't want to
+ * race with other CPU's that might be updating the dirty
+ * bit at the same time.
+ */
+struct vm_area_struct;
+
+#define  __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma,
+				 unsigned long address, pte_t *ptep,
+				 pte_t entry, int dirty);
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+extern int ptep_test_and_clear_young(struct vm_area_struct *vma,
+				     unsigned long addr, pte_t *ptep);
+
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+extern int ptep_clear_flush_young(struct vm_area_struct *vma,
+				  unsigned long address, pte_t *ptep);
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+				       pte_t *ptep)
+{
+	pte_t pte = native_ptep_get_and_clear(ptep);
+	pte_update(mm, addr, ptep);
+	return pte;
+}
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
+static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep,
+					    int full)
+{
+	pte_t pte;
+	if (full) {
+		/*
+		 * Full address destruction in progress; paravirt does not
+		 * care about updates and native needs no locking
+		 */
+		pte = native_local_ptep_get_and_clear(ptep);
+	} else {
+		pte = ptep_get_and_clear(mm, addr, ptep);
+	}
+	return pte;
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm,
+				      unsigned long addr, pte_t *ptep)
+{
+	clear_bit(_PAGE_BIT_RW, (unsigned long *)&ptep->pte);
+	pte_update(mm, addr, ptep);
+}
+
+/*
+ * clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
+ *
+ *  dst - pointer to pgd range anwhere on a pgd page
+ *  src - ""
+ *  count - the number of pgds to copy.
+ *
+ * dst and src can be on the same page, but the range must not overlap,
+ * and must not cross a page boundary.
+ */
+static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count)
+{
+       memcpy(dst, src, count * sizeof(pgd_t));
+}
+
+
+#include <asm-generic/pgtable.h>
+#endif	/* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_PGTABLE_H */
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
new file mode 100644
index 0000000..f9d5889
--- /dev/null
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -0,0 +1,191 @@
+#ifndef _ASM_X86_PGTABLE_32_H
+#define _ASM_X86_PGTABLE_32_H
+
+
+/*
+ * The Linux memory management assumes a three-level page table setup. On
+ * the i386, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * i386 mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the i386 page table tree.
+ */
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+#include <linux/threads.h>
+#include <asm/paravirt.h>
+
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct mm_struct;
+struct vm_area_struct;
+
+extern pgd_t swapper_pg_dir[1024];
+
+static inline void pgtable_cache_init(void) { }
+static inline void check_pgt_cache(void) { }
+void paging_init(void);
+
+extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
+
+/*
+ * The Linux x86 paging architecture is 'compile-time dual-mode', it
+ * implements both the traditional 2-level x86 page tables and the
+ * newer 3-level PAE-mode page tables.
+ */
+#ifdef CONFIG_X86_PAE
+# include <asm/pgtable-3level-defs.h>
+# define PMD_SIZE	(1UL << PMD_SHIFT)
+# define PMD_MASK	(~(PMD_SIZE - 1))
+#else
+# include <asm/pgtable-2level-defs.h>
+#endif
+
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
+
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	(8 * 1024 * 1024)
+#define VMALLOC_START	((unsigned long)high_memory + VMALLOC_OFFSET)
+#ifdef CONFIG_X86_PAE
+#define LAST_PKMAP 512
+#else
+#define LAST_PKMAP 1024
+#endif
+
+#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE * (LAST_PKMAP + 1))	\
+		    & PMD_MASK)
+
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END	(PKMAP_BASE - 2 * PAGE_SIZE)
+#else
+# define VMALLOC_END	(FIXADDR_START - 2 * PAGE_SIZE)
+#endif
+
+#define MAXMEM	(VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
+
+/*
+ * Define this if things work differently on an i386 and an i486:
+ * it will (on an i486) warn about kernel memory accesses that are
+ * done without a 'access_ok(VERIFY_WRITE,..)'
+ */
+#undef TEST_ACCESS_OK
+
+/* The boot page tables (all created as a single array) */
+extern unsigned long pg0[];
+
+#define pte_present(x)	((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
+#define pmd_none(x)	(!(unsigned long)pmd_val((x)))
+#define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
+#define pmd_bad(x) ((pmd_val(x) & (PTE_FLAGS_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+#ifdef CONFIG_X86_PAE
+# include <asm/pgtable-3level.h>
+#else
+# include <asm/pgtable-2level.h>
+#endif
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ * On processors which do not support it, this is a no-op.
+ */
+#define pgprot_noncached(prot)					\
+	((boot_cpu_data.x86 > 3)				\
+	 ? (__pgprot(pgprot_val(prot) | _PAGE_PCD | _PAGE_PWT))	\
+	 : (prot))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+
+static inline int pud_large(pud_t pud) { return 0; }
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address)				\
+	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address)					\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address)				\
+	((pte_t *)pmd_page_vaddr(*(dir)) +  pte_index((address)))
+
+#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
+
+#define pmd_page_vaddr(pmd)					\
+	((unsigned long)__va(pmd_val((pmd)) & PTE_PFN_MASK))
+
+#if defined(CONFIG_HIGHPTE)
+#define pte_offset_map(dir, address)					\
+	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) +		\
+	 pte_index((address)))
+#define pte_offset_map_nested(dir, address)				\
+	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE1) +		\
+	 pte_index((address)))
+#define pte_unmap(pte) kunmap_atomic((pte), KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1)
+#else
+#define pte_offset_map(dir, address)					\
+	((pte_t *)page_address(pmd_page(*(dir))) + pte_index((address)))
+#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address))
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+#endif
+
+/* Clear a kernel PTE and flush it from the TLB */
+#define kpte_clear_flush(ptep, vaddr)		\
+do {						\
+	pte_clear(&init_mm, (vaddr), (ptep));	\
+	__flush_tlb_one((vaddr));		\
+} while (0)
+
+/*
+ * The i386 doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.
+ */
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * kern_addr_valid() is (1) for FLATMEM and (0) for
+ * SPARSEMEM and DISCONTIGMEM
+ */
+#ifdef CONFIG_FLATMEM
+#define kern_addr_valid(addr)	(1)
+#else
+#define kern_addr_valid(kaddr)	(0)
+#endif
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
+	remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#endif /* _ASM_X86_PGTABLE_32_H */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
new file mode 100644
index 0000000..545a0e0
--- /dev/null
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -0,0 +1,285 @@
+#ifndef _ASM_X86_PGTABLE_64_H
+#define _ASM_X86_PGTABLE_64_H
+
+#include <linux/const.h>
+#ifndef __ASSEMBLY__
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the x86-64 page table tree.
+ */
+#include <asm/processor.h>
+#include <linux/bitops.h>
+#include <linux/threads.h>
+#include <asm/pda.h>
+
+extern pud_t level3_kernel_pgt[512];
+extern pud_t level3_ident_pgt[512];
+extern pmd_t level2_kernel_pgt[512];
+extern pmd_t level2_fixmap_pgt[512];
+extern pmd_t level2_ident_pgt[512];
+extern pgd_t init_level4_pgt[];
+
+#define swapper_pg_dir init_level4_pgt
+
+extern void paging_init(void);
+
+#endif /* !__ASSEMBLY__ */
+
+#define SHARED_KERNEL_PMD	0
+
+/*
+ * PGDIR_SHIFT determines what a top-level page table entry can map
+ */
+#define PGDIR_SHIFT	39
+#define PTRS_PER_PGD	512
+
+/*
+ * 3rd level page
+ */
+#define PUD_SHIFT	30
+#define PTRS_PER_PUD	512
+
+/*
+ * PMD_SHIFT determines the size of the area a middle-level
+ * page table can map
+ */
+#define PMD_SHIFT	21
+#define PTRS_PER_PMD	512
+
+/*
+ * entries per page directory level
+ */
+#define PTRS_PER_PTE	512
+
+#ifndef __ASSEMBLY__
+
+#define pte_ERROR(e)					\
+	printk("%s:%d: bad pte %p(%016lx).\n",		\
+	       __FILE__, __LINE__, &(e), pte_val(e))
+#define pmd_ERROR(e)					\
+	printk("%s:%d: bad pmd %p(%016lx).\n",		\
+	       __FILE__, __LINE__, &(e), pmd_val(e))
+#define pud_ERROR(e)					\
+	printk("%s:%d: bad pud %p(%016lx).\n",		\
+	       __FILE__, __LINE__, &(e), pud_val(e))
+#define pgd_ERROR(e)					\
+	printk("%s:%d: bad pgd %p(%016lx).\n",		\
+	       __FILE__, __LINE__, &(e), pgd_val(e))
+
+#define pgd_none(x)	(!pgd_val(x))
+#define pud_none(x)	(!pud_val(x))
+
+struct mm_struct;
+
+void set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte);
+
+
+static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
+				    pte_t *ptep)
+{
+	*ptep = native_make_pte(0);
+}
+
+static inline void native_set_pte(pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	native_set_pte(ptep, pte);
+}
+
+static inline pte_t native_ptep_get_and_clear(pte_t *xp)
+{
+#ifdef CONFIG_SMP
+	return native_make_pte(xchg(&xp->pte, 0));
+#else
+	/* native_local_ptep_get_and_clear,
+	   but duplicated because of cyclic dependency */
+	pte_t ret = *xp;
+	native_pte_clear(NULL, 0, xp);
+	return ret;
+#endif
+}
+
+static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+	*pmdp = pmd;
+}
+
+static inline void native_pmd_clear(pmd_t *pmd)
+{
+	native_set_pmd(pmd, native_make_pmd(0));
+}
+
+static inline void native_set_pud(pud_t *pudp, pud_t pud)
+{
+	*pudp = pud;
+}
+
+static inline void native_pud_clear(pud_t *pud)
+{
+	native_set_pud(pud, native_make_pud(0));
+}
+
+static inline void native_set_pgd(pgd_t *pgdp, pgd_t pgd)
+{
+	*pgdp = pgd;
+}
+
+static inline void native_pgd_clear(pgd_t *pgd)
+{
+	native_set_pgd(pgd, native_make_pgd(0));
+}
+
+#define pte_same(a, b)		((a).pte == (b).pte)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PMD_SIZE	(_AC(1, UL) << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE - 1))
+#define PUD_SIZE	(_AC(1, UL) << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE - 1))
+#define PGDIR_SIZE	(_AC(1, UL) << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
+
+
+#define MAXMEM		 _AC(0x00003fffffffffff, UL)
+#define VMALLOC_START    _AC(0xffffc20000000000, UL)
+#define VMALLOC_END      _AC(0xffffe1ffffffffff, UL)
+#define VMEMMAP_START	 _AC(0xffffe20000000000, UL)
+#define MODULES_VADDR    _AC(0xffffffffa0000000, UL)
+#define MODULES_END      _AC(0xffffffffff000000, UL)
+#define MODULES_LEN   (MODULES_END - MODULES_VADDR)
+
+#ifndef __ASSEMBLY__
+
+static inline int pgd_bad(pgd_t pgd)
+{
+	return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+}
+
+static inline int pud_bad(pud_t pud)
+{
+	return (pud_val(pud) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+}
+
+static inline int pmd_bad(pmd_t pmd)
+{
+	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+}
+
+#define pte_none(x)	(!pte_val((x)))
+#define pte_present(x)	(pte_val((x)) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+#define pages_to_mb(x)	((x) >> (20 - PAGE_SHIFT))   /* FIXME: is this right? */
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)					\
+	(__pgprot(pgprot_val((prot)) | _PAGE_PCD | _PAGE_PWT))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+/*
+ * Level 4 access.
+ */
+#define pgd_page_vaddr(pgd)						\
+	((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_PFN_MASK))
+#define pgd_page(pgd)		(pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
+#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
+static inline int pgd_large(pgd_t pgd) { return 0; }
+#define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
+
+/* PUD - Level3 access */
+/* to find an entry in a page-table-directory. */
+#define pud_page_vaddr(pud)						\
+	((unsigned long)__va(pud_val((pud)) & PHYSICAL_PAGE_MASK))
+#define pud_page(pud)	(pfn_to_page(pud_val((pud)) >> PAGE_SHIFT))
+#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
+#define pud_offset(pgd, address)					\
+	((pud_t *)pgd_page_vaddr(*(pgd)) + pud_index((address)))
+#define pud_present(pud) (pud_val((pud)) & _PAGE_PRESENT)
+
+static inline int pud_large(pud_t pte)
+{
+	return (pud_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+		(_PAGE_PSE | _PAGE_PRESENT);
+}
+
+/* PMD  - Level 2 access */
+#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_PFN_MASK))
+#define pmd_page(pmd)		(pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
+
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+#define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
+				  pmd_index(address))
+#define pmd_none(x)	(!pmd_val((x)))
+#define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
+#define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
+#define pmd_pfn(x)  ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
+
+#define pte_to_pgoff(pte) ((pte_val((pte)) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
+#define pgoff_to_pte(off) ((pte_t) { .pte = ((off) << PAGE_SHIFT) |	\
+					    _PAGE_FILE })
+#define PTE_FILE_MAX_BITS __PHYSICAL_MASK_SHIFT
+
+/* PTE - Level 1 access. */
+
+/* page, protection -> pte */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn((page)), (pgprot))
+
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
+					 pte_index((address)))
+
+/* x86-64 always has all page tables mapped. */
+#define pte_offset_map(dir, address) pte_offset_kernel((dir), (address))
+#define pte_offset_map_nested(dir, address) pte_offset_kernel((dir), (address))
+#define pte_unmap(pte) /* NOP */
+#define pte_unmap_nested(pte) /* NOP */
+
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+extern int direct_gbpages;
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 1) & 0x3f)
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((type) << 1) | \
+							 ((offset) << 8) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val((pte)) })
+#define __swp_entry_to_pte(x)		((pte_t) { .pte = (x).val })
+
+extern int kern_addr_valid(unsigned long addr);
+extern void cleanup_highmap(void);
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
+	remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+#define pgtable_cache_init()   do { } while (0)
+#define check_pgt_cache()      do { } while (0)
+
+#define PAGE_AGP    PAGE_KERNEL_NOCACHE
+#define HAVE_PAGE_AGP 1
+
+/* fs/proc/kcore.c */
+#define	kc_vaddr_to_offset(v) ((v) & __VIRTUAL_MASK)
+#define	kc_offset_to_vaddr(o)				\
+	(((o) & (1UL << (__VIRTUAL_MASK_SHIFT - 1)))	\
+	 ? ((o) | ~__VIRTUAL_MASK)			\
+	 : (o))
+
+#define __HAVE_ARCH_PTE_SAME
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PGTABLE_64_H */
diff --git a/arch/x86/include/asm/poll.h b/arch/x86/include/asm/poll.h
new file mode 100644
index 0000000..c98509d
--- /dev/null
+++ b/arch/x86/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/x86/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h
new file mode 100644
index 0000000..bb7133d
--- /dev/null
+++ b/arch/x86/include/asm/posix_types.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+#  include "posix_types_32.h"
+# else
+#  include "posix_types_64.h"
+# endif
+#else
+# ifdef __i386__
+#  include "posix_types_32.h"
+# else
+#  include "posix_types_64.h"
+# endif
+#endif
diff --git a/arch/x86/include/asm/posix_types_32.h b/arch/x86/include/asm/posix_types_32.h
new file mode 100644
index 0000000..f7d9adf
--- /dev/null
+++ b/arch/x86/include/asm/posix_types_32.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_X86_POSIX_TYPES_32_H
+#define _ASM_X86_POSIX_TYPES_32_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef	__FD_SET
+#define __FD_SET(fd,fdsetp)					\
+	asm volatile("btsl %1,%0":				\
+		     "+m" (*(__kernel_fd_set *)(fdsetp))	\
+		     : "r" ((int)(fd)))
+
+#undef	__FD_CLR
+#define __FD_CLR(fd,fdsetp)					\
+	asm volatile("btrl %1,%0":				\
+		     "+m" (*(__kernel_fd_set *)(fdsetp))	\
+		     : "r" ((int) (fd)))
+
+#undef	__FD_ISSET
+#define __FD_ISSET(fd,fdsetp)					\
+	(__extension__						\
+	 ({							\
+	 unsigned char __result;				\
+	 asm volatile("btl %1,%2 ; setb %0"			\
+		      : "=q" (__result)				\
+		      : "r" ((int)(fd)),			\
+			"m" (*(__kernel_fd_set *)(fdsetp)));	\
+	 __result;						\
+}))
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp)					\
+do {								\
+	int __d0, __d1;						\
+	asm volatile("cld ; rep ; stosl"			\
+		     : "=m" (*(__kernel_fd_set *)(fdsetp)),	\
+		       "=&c" (__d0), "=&D" (__d1)		\
+		     : "a" (0), "1" (__FDSET_LONGS),		\
+		       "2" ((__kernel_fd_set *)(fdsetp))	\
+		     : "memory");				\
+} while (0)
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_X86_POSIX_TYPES_32_H */
diff --git a/arch/x86/include/asm/posix_types_64.h b/arch/x86/include/asm/posix_types_64.h
new file mode 100644
index 0000000..eb8d2d9
--- /dev/null
+++ b/arch/x86/include/asm/posix_types_64.h
@@ -0,0 +1,119 @@
+#ifndef _ASM_X86_POSIX_TYPES_64_H
+#define _ASM_X86_POSIX_TYPES_64_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned long	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+
+typedef unsigned long	__kernel_old_dev_t;
+
+#ifdef __KERNEL__
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 32:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			return;
+		case 16:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			return;
+		case 8:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			return;
+		case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_X86_POSIX_TYPES_64_H */
diff --git a/arch/x86/include/asm/prctl.h b/arch/x86/include/asm/prctl.h
new file mode 100644
index 0000000..fe68114
--- /dev/null
+++ b/arch/x86/include/asm/prctl.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_PRCTL_H
+#define _ASM_X86_PRCTL_H
+
+#define ARCH_SET_GS 0x1001
+#define ARCH_SET_FS 0x1002
+#define ARCH_GET_FS 0x1003
+#define ARCH_GET_GS 0x1004
+
+
+#endif /* _ASM_X86_PRCTL_H */
diff --git a/arch/x86/include/asm/processor-cyrix.h b/arch/x86/include/asm/processor-cyrix.h
new file mode 100644
index 0000000..1198f2a
--- /dev/null
+++ b/arch/x86/include/asm/processor-cyrix.h
@@ -0,0 +1,38 @@
+/*
+ * NSC/Cyrix CPU indexed register access. Must be inlined instead of
+ * macros to ensure correct access ordering
+ * Access order is always 0x22 (=offset), 0x23 (=value)
+ *
+ * When using the old macros a line like
+ *   setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+ * gets expanded to:
+ *  do {
+ *    outb((CX86_CCR2), 0x22);
+ *    outb((({
+ *        outb((CX86_CCR2), 0x22);
+ *        inb(0x23);
+ *    }) | 0x88), 0x23);
+ *  } while (0);
+ *
+ * which in fact violates the access order (= 0x22, 0x22, 0x23, 0x23).
+ */
+
+static inline u8 getCx86(u8 reg)
+{
+	outb(reg, 0x22);
+	return inb(0x23);
+}
+
+static inline void setCx86(u8 reg, u8 data)
+{
+	outb(reg, 0x22);
+	outb(data, 0x23);
+}
+
+#define getCx86_old(reg) ({ outb((reg), 0x22); inb(0x23); })
+
+#define setCx86_old(reg, data) do { \
+	outb((reg), 0x22); \
+	outb((data), 0x23); \
+} while (0)
+
diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
new file mode 100644
index 0000000..7a3e836
--- /dev/null
+++ b/arch/x86/include/asm/processor-flags.h
@@ -0,0 +1,100 @@
+#ifndef _ASM_X86_PROCESSOR_FLAGS_H
+#define _ASM_X86_PROCESSOR_FLAGS_H
+/* Various flags defined: can be included from assembler. */
+
+/*
+ * EFLAGS bits
+ */
+#define X86_EFLAGS_CF	0x00000001 /* Carry Flag */
+#define X86_EFLAGS_PF	0x00000004 /* Parity Flag */
+#define X86_EFLAGS_AF	0x00000010 /* Auxillary carry Flag */
+#define X86_EFLAGS_ZF	0x00000040 /* Zero Flag */
+#define X86_EFLAGS_SF	0x00000080 /* Sign Flag */
+#define X86_EFLAGS_TF	0x00000100 /* Trap Flag */
+#define X86_EFLAGS_IF	0x00000200 /* Interrupt Flag */
+#define X86_EFLAGS_DF	0x00000400 /* Direction Flag */
+#define X86_EFLAGS_OF	0x00000800 /* Overflow Flag */
+#define X86_EFLAGS_IOPL	0x00003000 /* IOPL mask */
+#define X86_EFLAGS_NT	0x00004000 /* Nested Task */
+#define X86_EFLAGS_RF	0x00010000 /* Resume Flag */
+#define X86_EFLAGS_VM	0x00020000 /* Virtual Mode */
+#define X86_EFLAGS_AC	0x00040000 /* Alignment Check */
+#define X86_EFLAGS_VIF	0x00080000 /* Virtual Interrupt Flag */
+#define X86_EFLAGS_VIP	0x00100000 /* Virtual Interrupt Pending */
+#define X86_EFLAGS_ID	0x00200000 /* CPUID detection flag */
+
+/*
+ * Basic CPU control in CR0
+ */
+#define X86_CR0_PE	0x00000001 /* Protection Enable */
+#define X86_CR0_MP	0x00000002 /* Monitor Coprocessor */
+#define X86_CR0_EM	0x00000004 /* Emulation */
+#define X86_CR0_TS	0x00000008 /* Task Switched */
+#define X86_CR0_ET	0x00000010 /* Extension Type */
+#define X86_CR0_NE	0x00000020 /* Numeric Error */
+#define X86_CR0_WP	0x00010000 /* Write Protect */
+#define X86_CR0_AM	0x00040000 /* Alignment Mask */
+#define X86_CR0_NW	0x20000000 /* Not Write-through */
+#define X86_CR0_CD	0x40000000 /* Cache Disable */
+#define X86_CR0_PG	0x80000000 /* Paging */
+
+/*
+ * Paging options in CR3
+ */
+#define X86_CR3_PWT	0x00000008 /* Page Write Through */
+#define X86_CR3_PCD	0x00000010 /* Page Cache Disable */
+
+/*
+ * Intel CPU features in CR4
+ */
+#define X86_CR4_VME	0x00000001 /* enable vm86 extensions */
+#define X86_CR4_PVI	0x00000002 /* virtual interrupts flag enable */
+#define X86_CR4_TSD	0x00000004 /* disable time stamp at ipl 3 */
+#define X86_CR4_DE	0x00000008 /* enable debugging extensions */
+#define X86_CR4_PSE	0x00000010 /* enable page size extensions */
+#define X86_CR4_PAE	0x00000020 /* enable physical address extensions */
+#define X86_CR4_MCE	0x00000040 /* Machine check enable */
+#define X86_CR4_PGE	0x00000080 /* enable global pages */
+#define X86_CR4_PCE	0x00000100 /* enable performance counters at ipl 3 */
+#define X86_CR4_OSFXSR	0x00000200 /* enable fast FPU save and restore */
+#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
+#define X86_CR4_VMXE	0x00002000 /* enable VMX virtualization */
+#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
+
+/*
+ * x86-64 Task Priority Register, CR8
+ */
+#define X86_CR8_TPR	0x0000000F /* task priority register */
+
+/*
+ * AMD and Transmeta use MSRs for configuration; see <asm/msr-index.h>
+ */
+
+/*
+ *      NSC/Cyrix CPU configuration register indexes
+ */
+#define CX86_PCR0	0x20
+#define CX86_GCR	0xb8
+#define CX86_CCR0	0xc0
+#define CX86_CCR1	0xc1
+#define CX86_CCR2	0xc2
+#define CX86_CCR3	0xc3
+#define CX86_CCR4	0xe8
+#define CX86_CCR5	0xe9
+#define CX86_CCR6	0xea
+#define CX86_CCR7	0xeb
+#define CX86_PCR1	0xf0
+#define CX86_DIR0	0xfe
+#define CX86_DIR1	0xff
+#define CX86_ARR_BASE	0xc4
+#define CX86_RCR_BASE	0xdc
+
+#ifdef __KERNEL__
+#ifdef CONFIG_VM86
+#define X86_VM_MASK	X86_EFLAGS_VM
+#else
+#define X86_VM_MASK	0 /* No VM86 support */
+#endif
+#endif
+
+#endif /* _ASM_X86_PROCESSOR_FLAGS_H */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
new file mode 100644
index 0000000..5ca01e3
--- /dev/null
+++ b/arch/x86/include/asm/processor.h
@@ -0,0 +1,936 @@
+#ifndef _ASM_X86_PROCESSOR_H
+#define _ASM_X86_PROCESSOR_H
+
+#include <asm/processor-flags.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+#include <asm/vm86.h>
+#include <asm/math_emu.h>
+#include <asm/segment.h>
+#include <asm/types.h>
+#include <asm/sigcontext.h>
+#include <asm/current.h>
+#include <asm/cpufeature.h>
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm/percpu.h>
+#include <asm/msr.h>
+#include <asm/desc_defs.h>
+#include <asm/nops.h>
+#include <asm/ds.h>
+
+#include <linux/personality.h>
+#include <linux/cpumask.h>
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <linux/init.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+static inline void *current_text_addr(void)
+{
+	void *pc;
+
+	asm volatile("mov $1f, %0; 1:":"=r" (pc));
+
+	return pc;
+}
+
+#ifdef CONFIG_X86_VSMP
+# define ARCH_MIN_TASKALIGN		(1 << INTERNODE_CACHE_SHIFT)
+# define ARCH_MIN_MMSTRUCT_ALIGN	(1 << INTERNODE_CACHE_SHIFT)
+#else
+# define ARCH_MIN_TASKALIGN		16
+# define ARCH_MIN_MMSTRUCT_ALIGN	0
+#endif
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+struct cpuinfo_x86 {
+	__u8			x86;		/* CPU family */
+	__u8			x86_vendor;	/* CPU vendor */
+	__u8			x86_model;
+	__u8			x86_mask;
+#ifdef CONFIG_X86_32
+	char			wp_works_ok;	/* It doesn't on 386's */
+
+	/* Problems on some 486Dx4's and old 386's: */
+	char			hlt_works_ok;
+	char			hard_math;
+	char			rfu;
+	char			fdiv_bug;
+	char			f00f_bug;
+	char			coma_bug;
+	char			pad0;
+#else
+	/* Number of 4K pages in DTLB/ITLB combined(in pages): */
+	int			 x86_tlbsize;
+	__u8			x86_virt_bits;
+	__u8			x86_phys_bits;
+#endif
+	/* CPUID returned core id bits: */
+	__u8			x86_coreid_bits;
+	/* Max extended CPUID function supported: */
+	__u32			extended_cpuid_level;
+	/* Maximum supported CPUID level, -1=no CPUID: */
+	int			cpuid_level;
+	__u32			x86_capability[NCAPINTS];
+	char			x86_vendor_id[16];
+	char			x86_model_id[64];
+	/* in KB - valid for CPUS which support this call: */
+	int			x86_cache_size;
+	int			x86_cache_alignment;	/* In bytes */
+	int			x86_power;
+	unsigned long		loops_per_jiffy;
+#ifdef CONFIG_SMP
+	/* cpus sharing the last level cache: */
+	cpumask_t		llc_shared_map;
+#endif
+	/* cpuid returned max cores value: */
+	u16			 x86_max_cores;
+	u16			apicid;
+	u16			initial_apicid;
+	u16			x86_clflush_size;
+#ifdef CONFIG_SMP
+	/* number of cores as seen by the OS: */
+	u16			booted_cores;
+	/* Physical processor id: */
+	u16			phys_proc_id;
+	/* Core id: */
+	u16			cpu_core_id;
+	/* Index into per_cpu list: */
+	u16			cpu_index;
+#endif
+} __attribute__((__aligned__(SMP_CACHE_BYTES)));
+
+#define X86_VENDOR_INTEL	0
+#define X86_VENDOR_CYRIX	1
+#define X86_VENDOR_AMD		2
+#define X86_VENDOR_UMC		3
+#define X86_VENDOR_CENTAUR	5
+#define X86_VENDOR_TRANSMETA	7
+#define X86_VENDOR_NSC		8
+#define X86_VENDOR_NUM		9
+
+#define X86_VENDOR_UNKNOWN	0xff
+
+/*
+ * capabilities of CPUs
+ */
+extern struct cpuinfo_x86	boot_cpu_data;
+extern struct cpuinfo_x86	new_cpu_data;
+
+extern struct tss_struct	doublefault_tss;
+extern __u32			cleared_cpu_caps[NCAPINTS];
+
+#ifdef CONFIG_SMP
+DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
+#define cpu_data(cpu)		per_cpu(cpu_info, cpu)
+#define current_cpu_data	__get_cpu_var(cpu_info)
+#else
+#define cpu_data(cpu)		boot_cpu_data
+#define current_cpu_data	boot_cpu_data
+#endif
+
+extern const struct seq_operations cpuinfo_op;
+
+static inline int hlt_works(int cpu)
+{
+#ifdef CONFIG_X86_32
+	return cpu_data(cpu).hlt_works_ok;
+#else
+	return 1;
+#endif
+}
+
+#define cache_line_size()	(boot_cpu_data.x86_cache_alignment)
+
+extern void cpu_detect(struct cpuinfo_x86 *c);
+
+extern struct pt_regs *idle_regs(struct pt_regs *);
+
+extern void early_cpu_init(void);
+extern void identify_boot_cpu(void);
+extern void identify_secondary_cpu(struct cpuinfo_x86 *);
+extern void print_cpu_info(struct cpuinfo_x86 *);
+extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
+extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
+extern unsigned short num_cache_leaves;
+
+extern void detect_extended_topology(struct cpuinfo_x86 *c);
+extern void detect_ht(struct cpuinfo_x86 *c);
+
+static inline void native_cpuid(unsigned int *eax, unsigned int *ebx,
+				unsigned int *ecx, unsigned int *edx)
+{
+	/* ecx is often an input as well as an output. */
+	asm("cpuid"
+	    : "=a" (*eax),
+	      "=b" (*ebx),
+	      "=c" (*ecx),
+	      "=d" (*edx)
+	    : "0" (*eax), "2" (*ecx));
+}
+
+static inline void load_cr3(pgd_t *pgdir)
+{
+	write_cr3(__pa(pgdir));
+}
+
+#ifdef CONFIG_X86_32
+/* This is the TSS defined by the hardware. */
+struct x86_hw_tss {
+	unsigned short		back_link, __blh;
+	unsigned long		sp0;
+	unsigned short		ss0, __ss0h;
+	unsigned long		sp1;
+	/* ss1 caches MSR_IA32_SYSENTER_CS: */
+	unsigned short		ss1, __ss1h;
+	unsigned long		sp2;
+	unsigned short		ss2, __ss2h;
+	unsigned long		__cr3;
+	unsigned long		ip;
+	unsigned long		flags;
+	unsigned long		ax;
+	unsigned long		cx;
+	unsigned long		dx;
+	unsigned long		bx;
+	unsigned long		sp;
+	unsigned long		bp;
+	unsigned long		si;
+	unsigned long		di;
+	unsigned short		es, __esh;
+	unsigned short		cs, __csh;
+	unsigned short		ss, __ssh;
+	unsigned short		ds, __dsh;
+	unsigned short		fs, __fsh;
+	unsigned short		gs, __gsh;
+	unsigned short		ldt, __ldth;
+	unsigned short		trace;
+	unsigned short		io_bitmap_base;
+
+} __attribute__((packed));
+#else
+struct x86_hw_tss {
+	u32			reserved1;
+	u64			sp0;
+	u64			sp1;
+	u64			sp2;
+	u64			reserved2;
+	u64			ist[7];
+	u32			reserved3;
+	u32			reserved4;
+	u16			reserved5;
+	u16			io_bitmap_base;
+
+} __attribute__((packed)) ____cacheline_aligned;
+#endif
+
+/*
+ * IO-bitmap sizes:
+ */
+#define IO_BITMAP_BITS			65536
+#define IO_BITMAP_BYTES			(IO_BITMAP_BITS/8)
+#define IO_BITMAP_LONGS			(IO_BITMAP_BYTES/sizeof(long))
+#define IO_BITMAP_OFFSET		offsetof(struct tss_struct, io_bitmap)
+#define INVALID_IO_BITMAP_OFFSET	0x8000
+#define INVALID_IO_BITMAP_OFFSET_LAZY	0x9000
+
+struct tss_struct {
+	/*
+	 * The hardware state:
+	 */
+	struct x86_hw_tss	x86_tss;
+
+	/*
+	 * The extra 1 is there because the CPU will access an
+	 * additional byte beyond the end of the IO permission
+	 * bitmap. The extra byte must be all 1 bits, and must
+	 * be within the limit.
+	 */
+	unsigned long		io_bitmap[IO_BITMAP_LONGS + 1];
+	/*
+	 * Cache the current maximum and the last task that used the bitmap:
+	 */
+	unsigned long		io_bitmap_max;
+	struct thread_struct	*io_bitmap_owner;
+
+	/*
+	 * .. and then another 0x100 bytes for the emergency kernel stack:
+	 */
+	unsigned long		stack[64];
+
+} ____cacheline_aligned;
+
+DECLARE_PER_CPU(struct tss_struct, init_tss);
+
+/*
+ * Save the original ist values for checking stack pointers during debugging
+ */
+struct orig_ist {
+	unsigned long		ist[7];
+};
+
+#define	MXCSR_DEFAULT		0x1f80
+
+struct i387_fsave_struct {
+	u32			cwd;	/* FPU Control Word		*/
+	u32			swd;	/* FPU Status Word		*/
+	u32			twd;	/* FPU Tag Word			*/
+	u32			fip;	/* FPU IP Offset		*/
+	u32			fcs;	/* FPU IP Selector		*/
+	u32			foo;	/* FPU Operand Pointer Offset	*/
+	u32			fos;	/* FPU Operand Pointer Selector	*/
+
+	/* 8*10 bytes for each FP-reg = 80 bytes:			*/
+	u32			st_space[20];
+
+	/* Software status information [not touched by FSAVE ]:		*/
+	u32			status;
+};
+
+struct i387_fxsave_struct {
+	u16			cwd; /* Control Word			*/
+	u16			swd; /* Status Word			*/
+	u16			twd; /* Tag Word			*/
+	u16			fop; /* Last Instruction Opcode		*/
+	union {
+		struct {
+			u64	rip; /* Instruction Pointer		*/
+			u64	rdp; /* Data Pointer			*/
+		};
+		struct {
+			u32	fip; /* FPU IP Offset			*/
+			u32	fcs; /* FPU IP Selector			*/
+			u32	foo; /* FPU Operand Offset		*/
+			u32	fos; /* FPU Operand Selector		*/
+		};
+	};
+	u32			mxcsr;		/* MXCSR Register State */
+	u32			mxcsr_mask;	/* MXCSR Mask		*/
+
+	/* 8*16 bytes for each FP-reg = 128 bytes:			*/
+	u32			st_space[32];
+
+	/* 16*16 bytes for each XMM-reg = 256 bytes:			*/
+	u32			xmm_space[64];
+
+	u32			padding[12];
+
+	union {
+		u32		padding1[12];
+		u32		sw_reserved[12];
+	};
+
+} __attribute__((aligned(16)));
+
+struct i387_soft_struct {
+	u32			cwd;
+	u32			swd;
+	u32			twd;
+	u32			fip;
+	u32			fcs;
+	u32			foo;
+	u32			fos;
+	/* 8*10 bytes for each FP-reg = 80 bytes: */
+	u32			st_space[20];
+	u8			ftop;
+	u8			changed;
+	u8			lookahead;
+	u8			no_update;
+	u8			rm;
+	u8			alimit;
+	struct info		*info;
+	u32			entry_eip;
+};
+
+struct xsave_hdr_struct {
+	u64 xstate_bv;
+	u64 reserved1[2];
+	u64 reserved2[5];
+} __attribute__((packed));
+
+struct xsave_struct {
+	struct i387_fxsave_struct i387;
+	struct xsave_hdr_struct xsave_hdr;
+	/* new processor state extensions will go here */
+} __attribute__ ((packed, aligned (64)));
+
+union thread_xstate {
+	struct i387_fsave_struct	fsave;
+	struct i387_fxsave_struct	fxsave;
+	struct i387_soft_struct		soft;
+	struct xsave_struct		xsave;
+};
+
+#ifdef CONFIG_X86_64
+DECLARE_PER_CPU(struct orig_ist, orig_ist);
+#endif
+
+extern void print_cpu_info(struct cpuinfo_x86 *);
+extern unsigned int xstate_size;
+extern void free_thread_xstate(struct task_struct *);
+extern struct kmem_cache *task_xstate_cachep;
+extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
+extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
+extern unsigned short num_cache_leaves;
+
+struct thread_struct {
+	/* Cached TLS descriptors: */
+	struct desc_struct	tls_array[GDT_ENTRY_TLS_ENTRIES];
+	unsigned long		sp0;
+	unsigned long		sp;
+#ifdef CONFIG_X86_32
+	unsigned long		sysenter_cs;
+#else
+	unsigned long		usersp;	/* Copy from PDA */
+	unsigned short		es;
+	unsigned short		ds;
+	unsigned short		fsindex;
+	unsigned short		gsindex;
+#endif
+	unsigned long		ip;
+	unsigned long		fs;
+	unsigned long		gs;
+	/* Hardware debugging registers: */
+	unsigned long		debugreg0;
+	unsigned long		debugreg1;
+	unsigned long		debugreg2;
+	unsigned long		debugreg3;
+	unsigned long		debugreg6;
+	unsigned long		debugreg7;
+	/* Fault info: */
+	unsigned long		cr2;
+	unsigned long		trap_no;
+	unsigned long		error_code;
+	/* floating point and extended processor state */
+	union thread_xstate	*xstate;
+#ifdef CONFIG_X86_32
+	/* Virtual 86 mode info */
+	struct vm86_struct __user *vm86_info;
+	unsigned long		screen_bitmap;
+	unsigned long		v86flags;
+	unsigned long		v86mask;
+	unsigned long		saved_sp0;
+	unsigned int		saved_fs;
+	unsigned int		saved_gs;
+#endif
+	/* IO permissions: */
+	unsigned long		*io_bitmap_ptr;
+	unsigned long		iopl;
+	/* Max allowed port in the bitmap, in bytes: */
+	unsigned		io_bitmap_max;
+/* MSR_IA32_DEBUGCTLMSR value to switch in if TIF_DEBUGCTLMSR is set.  */
+	unsigned long	debugctlmsr;
+#ifdef CONFIG_X86_DS
+/* Debug Store context; see include/asm-x86/ds.h; goes into MSR_IA32_DS_AREA */
+	struct ds_context	*ds_ctx;
+#endif /* CONFIG_X86_DS */
+#ifdef CONFIG_X86_PTRACE_BTS
+/* the signal to send on a bts buffer overflow */
+	unsigned int	bts_ovfl_signal;
+#endif /* CONFIG_X86_PTRACE_BTS */
+};
+
+static inline unsigned long native_get_debugreg(int regno)
+{
+	unsigned long val = 0;	/* Damn you, gcc! */
+
+	switch (regno) {
+	case 0:
+		asm("mov %%db0, %0" :"=r" (val));
+		break;
+	case 1:
+		asm("mov %%db1, %0" :"=r" (val));
+		break;
+	case 2:
+		asm("mov %%db2, %0" :"=r" (val));
+		break;
+	case 3:
+		asm("mov %%db3, %0" :"=r" (val));
+		break;
+	case 6:
+		asm("mov %%db6, %0" :"=r" (val));
+		break;
+	case 7:
+		asm("mov %%db7, %0" :"=r" (val));
+		break;
+	default:
+		BUG();
+	}
+	return val;
+}
+
+static inline void native_set_debugreg(int regno, unsigned long value)
+{
+	switch (regno) {
+	case 0:
+		asm("mov %0, %%db0"	::"r" (value));
+		break;
+	case 1:
+		asm("mov %0, %%db1"	::"r" (value));
+		break;
+	case 2:
+		asm("mov %0, %%db2"	::"r" (value));
+		break;
+	case 3:
+		asm("mov %0, %%db3"	::"r" (value));
+		break;
+	case 6:
+		asm("mov %0, %%db6"	::"r" (value));
+		break;
+	case 7:
+		asm("mov %0, %%db7"	::"r" (value));
+		break;
+	default:
+		BUG();
+	}
+}
+
+/*
+ * Set IOPL bits in EFLAGS from given mask
+ */
+static inline void native_set_iopl_mask(unsigned mask)
+{
+#ifdef CONFIG_X86_32
+	unsigned int reg;
+
+	asm volatile ("pushfl;"
+		      "popl %0;"
+		      "andl %1, %0;"
+		      "orl %2, %0;"
+		      "pushl %0;"
+		      "popfl"
+		      : "=&r" (reg)
+		      : "i" (~X86_EFLAGS_IOPL), "r" (mask));
+#endif
+}
+
+static inline void
+native_load_sp0(struct tss_struct *tss, struct thread_struct *thread)
+{
+	tss->x86_tss.sp0 = thread->sp0;
+#ifdef CONFIG_X86_32
+	/* Only happens when SEP is enabled, no need to test "SEP"arately: */
+	if (unlikely(tss->x86_tss.ss1 != thread->sysenter_cs)) {
+		tss->x86_tss.ss1 = thread->sysenter_cs;
+		wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
+	}
+#endif
+}
+
+static inline void native_swapgs(void)
+{
+#ifdef CONFIG_X86_64
+	asm volatile("swapgs" ::: "memory");
+#endif
+}
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define __cpuid			native_cpuid
+#define paravirt_enabled()	0
+
+/*
+ * These special macros can be used to get or set a debugging register
+ */
+#define get_debugreg(var, register)				\
+	(var) = native_get_debugreg(register)
+#define set_debugreg(value, register)				\
+	native_set_debugreg(register, value)
+
+static inline void load_sp0(struct tss_struct *tss,
+			    struct thread_struct *thread)
+{
+	native_load_sp0(tss, thread);
+}
+
+#define set_iopl_mask native_set_iopl_mask
+#endif /* CONFIG_PARAVIRT */
+
+/*
+ * Save the cr4 feature set we're using (ie
+ * Pentium 4MB enable and PPro Global page
+ * enable), so that any CPU's that boot up
+ * after us can get the correct flags.
+ */
+extern unsigned long		mmu_cr4_features;
+
+static inline void set_in_cr4(unsigned long mask)
+{
+	unsigned cr4;
+
+	mmu_cr4_features |= mask;
+	cr4 = read_cr4();
+	cr4 |= mask;
+	write_cr4(cr4);
+}
+
+static inline void clear_in_cr4(unsigned long mask)
+{
+	unsigned cr4;
+
+	mmu_cr4_features &= ~mask;
+	cr4 = read_cr4();
+	cr4 &= ~mask;
+	write_cr4(cr4);
+}
+
+typedef struct {
+	unsigned long		seg;
+} mm_segment_t;
+
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy state */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+/*
+ * Generic CPUID function
+ * clear %ecx since some cpus (Cyrix MII) do not set or clear %ecx
+ * resulting in stale register contents being returned.
+ */
+static inline void cpuid(unsigned int op,
+			 unsigned int *eax, unsigned int *ebx,
+			 unsigned int *ecx, unsigned int *edx)
+{
+	*eax = op;
+	*ecx = 0;
+	__cpuid(eax, ebx, ecx, edx);
+}
+
+/* Some CPUID calls want 'count' to be placed in ecx */
+static inline void cpuid_count(unsigned int op, int count,
+			       unsigned int *eax, unsigned int *ebx,
+			       unsigned int *ecx, unsigned int *edx)
+{
+	*eax = op;
+	*ecx = count;
+	__cpuid(eax, ebx, ecx, edx);
+}
+
+/*
+ * CPUID functions returning a single datum
+ */
+static inline unsigned int cpuid_eax(unsigned int op)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	cpuid(op, &eax, &ebx, &ecx, &edx);
+
+	return eax;
+}
+
+static inline unsigned int cpuid_ebx(unsigned int op)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	cpuid(op, &eax, &ebx, &ecx, &edx);
+
+	return ebx;
+}
+
+static inline unsigned int cpuid_ecx(unsigned int op)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	cpuid(op, &eax, &ebx, &ecx, &edx);
+
+	return ecx;
+}
+
+static inline unsigned int cpuid_edx(unsigned int op)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	cpuid(op, &eax, &ebx, &ecx, &edx);
+
+	return edx;
+}
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+static inline void rep_nop(void)
+{
+	asm volatile("rep; nop" ::: "memory");
+}
+
+static inline void cpu_relax(void)
+{
+	rep_nop();
+}
+
+/* Stop speculative execution: */
+static inline void sync_core(void)
+{
+	int tmp;
+
+	asm volatile("cpuid" : "=a" (tmp) : "0" (1)
+		     : "ebx", "ecx", "edx", "memory");
+}
+
+static inline void __monitor(const void *eax, unsigned long ecx,
+			     unsigned long edx)
+{
+	/* "monitor %eax, %ecx, %edx;" */
+	asm volatile(".byte 0x0f, 0x01, 0xc8;"
+		     :: "a" (eax), "c" (ecx), "d"(edx));
+}
+
+static inline void __mwait(unsigned long eax, unsigned long ecx)
+{
+	/* "mwait %eax, %ecx;" */
+	asm volatile(".byte 0x0f, 0x01, 0xc9;"
+		     :: "a" (eax), "c" (ecx));
+}
+
+static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
+{
+	trace_hardirqs_on();
+	/* "mwait %eax, %ecx;" */
+	asm volatile("sti; .byte 0x0f, 0x01, 0xc9;"
+		     :: "a" (eax), "c" (ecx));
+}
+
+extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx);
+
+extern void select_idle_routine(const struct cpuinfo_x86 *c);
+
+extern unsigned long		boot_option_idle_override;
+extern unsigned long		idle_halt;
+extern unsigned long		idle_nomwait;
+
+/*
+ * on systems with caches, caches must be flashed as the absolute
+ * last instruction before going into a suspended halt.  Otherwise,
+ * dirty data can linger in the cache and become stale on resume,
+ * leading to strange errors.
+ *
+ * perform a variety of operations to guarantee that the compiler
+ * will not reorder instructions.  wbinvd itself is serializing
+ * so the processor will not reorder.
+ *
+ * Systems without cache can just go into halt.
+ */
+static inline void wbinvd_halt(void)
+{
+	mb();
+	/* check for clflush to determine if wbinvd is legal */
+	if (cpu_has_clflush)
+		asm volatile("cli; wbinvd; 1: hlt; jmp 1b" : : : "memory");
+	else
+		while (1)
+			halt();
+}
+
+extern void enable_sep_cpu(void);
+extern int sysenter_setup(void);
+
+/* Defined in head.S */
+extern struct desc_ptr		early_gdt_descr;
+
+extern void cpu_set_gdt(int);
+extern void switch_to_new_gdt(void);
+extern void cpu_init(void);
+extern void init_gdt(int cpu);
+
+static inline void update_debugctlmsr(unsigned long debugctlmsr)
+{
+#ifndef CONFIG_X86_DEBUGCTLMSR
+	if (boot_cpu_data.x86 < 6)
+		return;
+#endif
+	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
+}
+
+/*
+ * from system description table in BIOS. Mostly for MCA use, but
+ * others may find it useful:
+ */
+extern unsigned int		machine_id;
+extern unsigned int		machine_submodel_id;
+extern unsigned int		BIOS_revision;
+
+/* Boot loader type from the setup header: */
+extern int			bootloader_type;
+
+extern char			ignore_fpu_irq;
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT 1
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+#ifdef CONFIG_X86_32
+# define BASE_PREFETCH		ASM_NOP4
+# define ARCH_HAS_PREFETCH
+#else
+# define BASE_PREFETCH		"prefetcht0 (%1)"
+#endif
+
+/*
+ * Prefetch instructions for Pentium III (+) and AMD Athlon (+)
+ *
+ * It's not worth to care about 3dnow prefetches for the K6
+ * because they are microcoded there and very slow.
+ */
+static inline void prefetch(const void *x)
+{
+	alternative_input(BASE_PREFETCH,
+			  "prefetchnta (%1)",
+			  X86_FEATURE_XMM,
+			  "r" (x));
+}
+
+/*
+ * 3dnow prefetch to get an exclusive cache line.
+ * Useful for spinlocks to avoid one state transition in the
+ * cache coherency protocol:
+ */
+static inline void prefetchw(const void *x)
+{
+	alternative_input(BASE_PREFETCH,
+			  "prefetchw (%1)",
+			  X86_FEATURE_3DNOW,
+			  "r" (x));
+}
+
+static inline void spin_lock_prefetch(const void *x)
+{
+	prefetchw(x);
+}
+
+#ifdef CONFIG_X86_32
+/*
+ * User space process size: 3GB (default).
+ */
+#define TASK_SIZE		PAGE_OFFSET
+#define STACK_TOP		TASK_SIZE
+#define STACK_TOP_MAX		STACK_TOP
+
+#define INIT_THREAD  {							  \
+	.sp0			= sizeof(init_stack) + (long)&init_stack, \
+	.vm86_info		= NULL,					  \
+	.sysenter_cs		= __KERNEL_CS,				  \
+	.io_bitmap_ptr		= NULL,					  \
+	.fs			= __KERNEL_PERCPU,			  \
+}
+
+/*
+ * Note that the .io_bitmap member must be extra-big. This is because
+ * the CPU will access an additional byte beyond the end of the IO
+ * permission bitmap. The extra byte must be all 1 bits, and must
+ * be within the limit.
+ */
+#define INIT_TSS  {							  \
+	.x86_tss = {							  \
+		.sp0		= sizeof(init_stack) + (long)&init_stack, \
+		.ss0		= __KERNEL_DS,				  \
+		.ss1		= __KERNEL_CS,				  \
+		.io_bitmap_base	= INVALID_IO_BITMAP_OFFSET,		  \
+	 },								  \
+	.io_bitmap		= { [0 ... IO_BITMAP_LONGS] = ~0 },	  \
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+#define THREAD_SIZE_LONGS      (THREAD_SIZE/sizeof(unsigned long))
+#define KSTK_TOP(info)                                                 \
+({                                                                     \
+       unsigned long *__ptr = (unsigned long *)(info);                 \
+       (unsigned long)(&__ptr[THREAD_SIZE_LONGS]);                     \
+})
+
+/*
+ * The below -8 is to reserve 8 bytes on top of the ring0 stack.
+ * This is necessary to guarantee that the entire "struct pt_regs"
+ * is accessable even if the CPU haven't stored the SS/ESP registers
+ * on the stack (interrupt gate does not save these registers
+ * when switching to the same priv ring).
+ * Therefore beware: accessing the ss/esp fields of the
+ * "struct pt_regs" is possible, but they may contain the
+ * completely wrong values.
+ */
+#define task_pt_regs(task)                                             \
+({                                                                     \
+       struct pt_regs *__regs__;                                       \
+       __regs__ = (struct pt_regs *)(KSTK_TOP(task_stack_page(task))-8); \
+       __regs__ - 1;                                                   \
+})
+
+#define KSTK_ESP(task)		(task_pt_regs(task)->sp)
+
+#else
+/*
+ * User space process size. 47bits minus one guard page.
+ */
+#define TASK_SIZE64	((1UL << 47) - PAGE_SIZE)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define IA32_PAGE_OFFSET	((current->personality & ADDR_LIMIT_3GB) ? \
+					0xc0000000 : 0xFFFFe000)
+
+#define TASK_SIZE		(test_thread_flag(TIF_IA32) ? \
+					IA32_PAGE_OFFSET : TASK_SIZE64)
+#define TASK_SIZE_OF(child)	((test_tsk_thread_flag(child, TIF_IA32)) ? \
+					IA32_PAGE_OFFSET : TASK_SIZE64)
+
+#define STACK_TOP		TASK_SIZE
+#define STACK_TOP_MAX		TASK_SIZE64
+
+#define INIT_THREAD  { \
+	.sp0 = (unsigned long)&init_stack + sizeof(init_stack) \
+}
+
+#define INIT_TSS  { \
+	.x86_tss.sp0 = (unsigned long)&init_stack + sizeof(init_stack) \
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ * What is this good for? it will be always the scheduler or ret_from_fork.
+ */
+#define thread_saved_pc(t)	(*(unsigned long *)((t)->thread.sp - 8))
+
+#define task_pt_regs(tsk)	((struct pt_regs *)(tsk)->thread.sp0 - 1)
+#define KSTK_ESP(tsk)		-1 /* sorry. doesn't work for syscall. */
+#endif /* CONFIG_X86_64 */
+
+extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
+					       unsigned long new_sp);
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
+
+#define KSTK_EIP(task)		(task_pt_regs(task)->ip)
+
+/* Get/set a process' ability to use the timestamp counter instruction */
+#define GET_TSC_CTL(adr)	get_tsc_mode((adr))
+#define SET_TSC_CTL(val)	set_tsc_mode((val))
+
+extern int get_tsc_mode(unsigned long adr);
+extern int set_tsc_mode(unsigned int val);
+
+#endif /* _ASM_X86_PROCESSOR_H */
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
new file mode 100644
index 0000000..d6a22f9
--- /dev/null
+++ b/arch/x86/include/asm/proto.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_X86_PROTO_H
+#define _ASM_X86_PROTO_H
+
+#include <asm/ldt.h>
+
+/* misc architecture specific prototypes */
+
+extern void early_idt_handler(void);
+
+extern void system_call(void);
+extern void syscall_init(void);
+
+extern void ia32_syscall(void);
+extern void ia32_cstar_target(void);
+extern void ia32_sysenter_target(void);
+
+extern void syscall32_cpu_init(void);
+
+extern void check_efer(void);
+
+#ifdef CONFIG_X86_BIOS_REBOOT
+extern int reboot_force;
+#else
+static const int reboot_force = 0;
+#endif
+
+long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
+
+#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
+#define round_down(x, y) ((x) & ~((y) - 1))
+
+#endif /* _ASM_X86_PROTO_H */
diff --git a/arch/x86/include/asm/ptrace-abi.h b/arch/x86/include/asm/ptrace-abi.h
new file mode 100644
index 0000000..25f1bb8
--- /dev/null
+++ b/arch/x86/include/asm/ptrace-abi.h
@@ -0,0 +1,145 @@
+#ifndef _ASM_X86_PTRACE_ABI_H
+#define _ASM_X86_PTRACE_ABI_H
+
+#ifdef __i386__
+
+#define EBX 0
+#define ECX 1
+#define EDX 2
+#define ESI 3
+#define EDI 4
+#define EBP 5
+#define EAX 6
+#define DS 7
+#define ES 8
+#define FS 9
+#define GS 10
+#define ORIG_EAX 11
+#define EIP 12
+#define CS  13
+#define EFL 14
+#define UESP 15
+#define SS   16
+#define FRAME_SIZE 17
+
+#else /* __i386__ */
+
+#if defined(__ASSEMBLY__) || defined(__FRAME_OFFSETS)
+#define R15 0
+#define R14 8
+#define R13 16
+#define R12 24
+#define RBP 32
+#define RBX 40
+/* arguments: interrupts/non tracing syscalls only save upto here*/
+#define R11 48
+#define R10 56
+#define R9 64
+#define R8 72
+#define RAX 80
+#define RCX 88
+#define RDX 96
+#define RSI 104
+#define RDI 112
+#define ORIG_RAX 120       /* = ERROR */
+/* end of arguments */
+/* cpu exception frame or undefined in case of fast syscall. */
+#define RIP 128
+#define CS 136
+#define EFLAGS 144
+#define RSP 152
+#define SS 160
+#define ARGOFFSET R11
+#endif /* __ASSEMBLY__ */
+
+/* top of stack page */
+#define FRAME_SIZE 168
+
+#endif /* !__i386__ */
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_GETFPXREGS         18
+#define PTRACE_SETFPXREGS         19
+
+#define PTRACE_OLDSETOPTIONS      21
+
+/* only useful for access 32bit programs / kernels */
+#define PTRACE_GET_THREAD_AREA    25
+#define PTRACE_SET_THREAD_AREA    26
+
+#ifdef __x86_64__
+# define PTRACE_ARCH_PRCTL	  30
+#endif
+
+#define PTRACE_SYSEMU		  31
+#define PTRACE_SYSEMU_SINGLESTEP  32
+
+#define PTRACE_SINGLEBLOCK	33	/* resume execution until next branch */
+
+#ifdef CONFIG_X86_PTRACE_BTS
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* configuration/status structure used in PTRACE_BTS_CONFIG and
+   PTRACE_BTS_STATUS commands.
+*/
+struct ptrace_bts_config {
+	/* requested or actual size of BTS buffer in bytes */
+	__u32 size;
+	/* bitmask of below flags */
+	__u32 flags;
+	/* buffer overflow signal */
+	__u32 signal;
+	/* actual size of bts_struct in bytes */
+	__u32 bts_size;
+};
+#endif /* __ASSEMBLY__ */
+
+#define PTRACE_BTS_O_TRACE	0x1 /* branch trace */
+#define PTRACE_BTS_O_SCHED	0x2 /* scheduling events w/ jiffies */
+#define PTRACE_BTS_O_SIGNAL     0x4 /* send SIG<signal> on buffer overflow
+				       instead of wrapping around */
+#define PTRACE_BTS_O_ALLOC	0x8 /* (re)allocate buffer */
+
+#define PTRACE_BTS_CONFIG	40
+/* Configure branch trace recording.
+   ADDR points to a struct ptrace_bts_config.
+   DATA gives the size of that buffer.
+   A new buffer is allocated, if requested in the flags.
+   An overflow signal may only be requested for new buffers.
+   Returns the number of bytes read.
+*/
+#define PTRACE_BTS_STATUS	41
+/* Return the current configuration in a struct ptrace_bts_config
+   pointed to by ADDR; DATA gives the size of that buffer.
+   Returns the number of bytes written.
+*/
+#define PTRACE_BTS_SIZE		42
+/* Return the number of available BTS records for draining.
+   DATA and ADDR are ignored.
+*/
+#define PTRACE_BTS_GET		43
+/* Get a single BTS record.
+   DATA defines the index into the BTS array, where 0 is the newest
+   entry, and higher indices refer to older entries.
+   ADDR is pointing to struct bts_struct (see asm/ds.h).
+*/
+#define PTRACE_BTS_CLEAR	44
+/* Clear the BTS buffer.
+   DATA and ADDR are ignored.
+*/
+#define PTRACE_BTS_DRAIN	45
+/* Read all available BTS records and clear the buffer.
+   ADDR points to an array of struct bts_struct.
+   DATA gives the size of that buffer.
+   BTS records are read from oldest to newest.
+   Returns number of BTS records drained.
+*/
+#endif /* CONFIG_X86_PTRACE_BTS */
+
+#endif /* _ASM_X86_PTRACE_ABI_H */
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
new file mode 100644
index 0000000..d1531c8
--- /dev/null
+++ b/arch/x86/include/asm/ptrace.h
@@ -0,0 +1,280 @@
+#ifndef _ASM_X86_PTRACE_H
+#define _ASM_X86_PTRACE_H
+
+#include <linux/compiler.h>	/* For __user */
+#include <asm/ptrace-abi.h>
+#include <asm/processor-flags.h>
+
+#ifdef __KERNEL__
+#include <asm/ds.h>		/* the DS BTS struct is used for ptrace too */
+#include <asm/segment.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef __i386__
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+#ifndef __KERNEL__
+
+struct pt_regs {
+	long ebx;
+	long ecx;
+	long edx;
+	long esi;
+	long edi;
+	long ebp;
+	long eax;
+	int  xds;
+	int  xes;
+	int  xfs;
+	/* int  gs; */
+	long orig_eax;
+	long eip;
+	int  xcs;
+	long eflags;
+	long esp;
+	int  xss;
+};
+
+#else /* __KERNEL__ */
+
+struct pt_regs {
+	unsigned long bx;
+	unsigned long cx;
+	unsigned long dx;
+	unsigned long si;
+	unsigned long di;
+	unsigned long bp;
+	unsigned long ax;
+	unsigned long ds;
+	unsigned long es;
+	unsigned long fs;
+	/* int  gs; */
+	unsigned long orig_ax;
+	unsigned long ip;
+	unsigned long cs;
+	unsigned long flags;
+	unsigned long sp;
+	unsigned long ss;
+};
+
+#endif /* __KERNEL__ */
+
+#else /* __i386__ */
+
+#ifndef __KERNEL__
+
+struct pt_regs {
+	unsigned long r15;
+	unsigned long r14;
+	unsigned long r13;
+	unsigned long r12;
+	unsigned long rbp;
+	unsigned long rbx;
+/* arguments: non interrupts/non tracing syscalls only save upto here*/
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long rax;
+	unsigned long rcx;
+	unsigned long rdx;
+	unsigned long rsi;
+	unsigned long rdi;
+	unsigned long orig_rax;
+/* end of arguments */
+/* cpu exception frame or undefined */
+	unsigned long rip;
+	unsigned long cs;
+	unsigned long eflags;
+	unsigned long rsp;
+	unsigned long ss;
+/* top of stack page */
+};
+
+#else /* __KERNEL__ */
+
+struct pt_regs {
+	unsigned long r15;
+	unsigned long r14;
+	unsigned long r13;
+	unsigned long r12;
+	unsigned long bp;
+	unsigned long bx;
+/* arguments: non interrupts/non tracing syscalls only save upto here*/
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long ax;
+	unsigned long cx;
+	unsigned long dx;
+	unsigned long si;
+	unsigned long di;
+	unsigned long orig_ax;
+/* end of arguments */
+/* cpu exception frame or undefined */
+	unsigned long ip;
+	unsigned long cs;
+	unsigned long flags;
+	unsigned long sp;
+	unsigned long ss;
+/* top of stack page */
+};
+
+#endif /* __KERNEL__ */
+#endif /* !__i386__ */
+
+
+#ifdef CONFIG_X86_PTRACE_BTS
+/* a branch trace record entry
+ *
+ * In order to unify the interface between various processor versions,
+ * we use the below data structure for all processors.
+ */
+enum bts_qualifier {
+	BTS_INVALID = 0,
+	BTS_BRANCH,
+	BTS_TASK_ARRIVES,
+	BTS_TASK_DEPARTS
+};
+
+struct bts_struct {
+	__u64 qualifier;
+	union {
+		/* BTS_BRANCH */
+		struct {
+			__u64 from_ip;
+			__u64 to_ip;
+		} lbr;
+		/* BTS_TASK_ARRIVES or
+		   BTS_TASK_DEPARTS */
+		__u64 jiffies;
+	} variant;
+};
+#endif /* CONFIG_X86_PTRACE_BTS */
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+
+struct cpuinfo_x86;
+struct task_struct;
+
+#ifdef CONFIG_X86_PTRACE_BTS
+extern void __cpuinit ptrace_bts_init_intel(struct cpuinfo_x86 *);
+extern void ptrace_bts_take_timestamp(struct task_struct *, enum bts_qualifier);
+#else
+#define ptrace_bts_init_intel(config) do {} while (0)
+#endif /* CONFIG_X86_PTRACE_BTS */
+
+extern unsigned long profile_pc(struct pt_regs *regs);
+
+extern unsigned long
+convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs);
+extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
+			 int error_code, int si_code);
+void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
+
+extern long syscall_trace_enter(struct pt_regs *);
+extern void syscall_trace_leave(struct pt_regs *);
+
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->ax;
+}
+
+/*
+ * user_mode_vm(regs) determines whether a register set came from user mode.
+ * This is true if V8086 mode was enabled OR if the register set was from
+ * protected mode with RPL-3 CS value.  This tricky test checks that with
+ * one comparison.  Many places in the kernel can bypass this full check
+ * if they have already ruled out V8086 mode, so user_mode(regs) can be used.
+ */
+static inline int user_mode(struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_32
+	return (regs->cs & SEGMENT_RPL_MASK) == USER_RPL;
+#else
+	return !!(regs->cs & 3);
+#endif
+}
+
+static inline int user_mode_vm(struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_32
+	return ((regs->cs & SEGMENT_RPL_MASK) | (regs->flags & X86_VM_MASK)) >=
+		USER_RPL;
+#else
+	return user_mode(regs);
+#endif
+}
+
+static inline int v8086_mode(struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_32
+	return (regs->flags & X86_VM_MASK);
+#else
+	return 0;	/* No V86 mode support in long mode */
+#endif
+}
+
+/*
+ * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
+ * when it traps.  So regs will be the current sp.
+ *
+ * This is valid only for kernel mode traps.
+ */
+static inline unsigned long kernel_trap_sp(struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_32
+	return (unsigned long)regs;
+#else
+	return regs->sp;
+#endif
+}
+
+static inline unsigned long instruction_pointer(struct pt_regs *regs)
+{
+	return regs->ip;
+}
+
+static inline unsigned long frame_pointer(struct pt_regs *regs)
+{
+	return regs->bp;
+}
+
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+	return regs->sp;
+}
+
+/*
+ * These are defined as per linux/ptrace.h, which see.
+ */
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+extern void user_enable_block_step(struct task_struct *);
+#ifdef CONFIG_X86_DEBUGCTLMSR
+#define arch_has_block_step()	(1)
+#else
+#define arch_has_block_step()	(boot_cpu_data.x86 >= 6)
+#endif
+
+struct user_desc;
+extern int do_get_thread_area(struct task_struct *p, int idx,
+			      struct user_desc __user *info);
+extern int do_set_thread_area(struct task_struct *p, int idx,
+			      struct user_desc __user *info, int can_allocate);
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#endif /* __KERNEL__ */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PTRACE_H */
diff --git a/arch/x86/include/asm/pvclock-abi.h b/arch/x86/include/asm/pvclock-abi.h
new file mode 100644
index 0000000..6d93508
--- /dev/null
+++ b/arch/x86/include/asm/pvclock-abi.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_X86_PVCLOCK_ABI_H
+#define _ASM_X86_PVCLOCK_ABI_H
+#ifndef __ASSEMBLY__
+
+/*
+ * These structs MUST NOT be changed.
+ * They are the ABI between hypervisor and guest OS.
+ * Both Xen and KVM are using this.
+ *
+ * pvclock_vcpu_time_info holds the system time and the tsc timestamp
+ * of the last update. So the guest can use the tsc delta to get a
+ * more precise system time.  There is one per virtual cpu.
+ *
+ * pvclock_wall_clock references the point in time when the system
+ * time was zero (usually boot time), thus the guest calculates the
+ * current wall clock by adding the system time.
+ *
+ * Protocol for the "version" fields is: hypervisor raises it (making
+ * it uneven) before it starts updating the fields and raises it again
+ * (making it even) when it is done.  Thus the guest can make sure the
+ * time values it got are consistent by checking the version before
+ * and after reading them.
+ */
+
+struct pvclock_vcpu_time_info {
+	u32   version;
+	u32   pad0;
+	u64   tsc_timestamp;
+	u64   system_time;
+	u32   tsc_to_system_mul;
+	s8    tsc_shift;
+	u8    pad[3];
+} __attribute__((__packed__)); /* 32 bytes */
+
+struct pvclock_wall_clock {
+	u32   version;
+	u32   sec;
+	u32   nsec;
+} __attribute__((__packed__));
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_X86_PVCLOCK_ABI_H */
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
new file mode 100644
index 0000000..53235fd
--- /dev/null
+++ b/arch/x86/include/asm/pvclock.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_X86_PVCLOCK_H
+#define _ASM_X86_PVCLOCK_H
+
+#include <linux/clocksource.h>
+#include <asm/pvclock-abi.h>
+
+/* some helper functions for xen and kvm pv clock sources */
+cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src);
+unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src);
+void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
+			    struct pvclock_vcpu_time_info *vcpu,
+			    struct timespec *ts);
+
+#endif /* _ASM_X86_PVCLOCK_H */
diff --git a/arch/x86/include/asm/reboot.h b/arch/x86/include/asm/reboot.h
new file mode 100644
index 0000000..df77103
--- /dev/null
+++ b/arch/x86/include/asm/reboot.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_REBOOT_H
+#define _ASM_X86_REBOOT_H
+
+struct pt_regs;
+
+struct machine_ops {
+	void (*restart)(char *cmd);
+	void (*halt)(void);
+	void (*power_off)(void);
+	void (*shutdown)(void);
+	void (*crash_shutdown)(struct pt_regs *);
+	void (*emergency_restart)(void);
+};
+
+extern struct machine_ops machine_ops;
+
+void native_machine_crash_shutdown(struct pt_regs *regs);
+void native_machine_shutdown(void);
+void machine_real_restart(const unsigned char *code, int length);
+
+#endif /* _ASM_X86_REBOOT_H */
diff --git a/arch/x86/include/asm/reboot_fixups.h b/arch/x86/include/asm/reboot_fixups.h
new file mode 100644
index 0000000..765debe
--- /dev/null
+++ b/arch/x86/include/asm/reboot_fixups.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_X86_REBOOT_FIXUPS_H
+#define _ASM_X86_REBOOT_FIXUPS_H
+
+extern void mach_reboot_fixups(void);
+
+#endif /* _ASM_X86_REBOOT_FIXUPS_H */
diff --git a/arch/x86/include/asm/required-features.h b/arch/x86/include/asm/required-features.h
new file mode 100644
index 0000000..d5cd6c5
--- /dev/null
+++ b/arch/x86/include/asm/required-features.h
@@ -0,0 +1,82 @@
+#ifndef _ASM_X86_REQUIRED_FEATURES_H
+#define _ASM_X86_REQUIRED_FEATURES_H
+
+/* Define minimum CPUID feature set for kernel These bits are checked
+   really early to actually display a visible error message before the
+   kernel dies.  Make sure to assign features to the proper mask!
+
+   Some requirements that are not in CPUID yet are also in the
+   CONFIG_X86_MINIMUM_CPU_FAMILY which is checked too.
+
+   The real information is in arch/x86/Kconfig.cpu, this just converts
+   the CONFIGs into a bitmask */
+
+#ifndef CONFIG_MATH_EMULATION
+# define NEED_FPU	(1<<(X86_FEATURE_FPU & 31))
+#else
+# define NEED_FPU	0
+#endif
+
+#if defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
+# define NEED_PAE	(1<<(X86_FEATURE_PAE & 31))
+#else
+# define NEED_PAE	0
+#endif
+
+#ifdef CONFIG_X86_CMPXCHG64
+# define NEED_CX8	(1<<(X86_FEATURE_CX8 & 31))
+#else
+# define NEED_CX8	0
+#endif
+
+#if defined(CONFIG_X86_CMOV) || defined(CONFIG_X86_64)
+# define NEED_CMOV	(1<<(X86_FEATURE_CMOV & 31))
+#else
+# define NEED_CMOV	0
+#endif
+
+#ifdef CONFIG_X86_USE_3DNOW
+# define NEED_3DNOW	(1<<(X86_FEATURE_3DNOW & 31))
+#else
+# define NEED_3DNOW	0
+#endif
+
+#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64)
+# define NEED_NOPL	(1<<(X86_FEATURE_NOPL & 31))
+#else
+# define NEED_NOPL	0
+#endif
+
+#ifdef CONFIG_X86_64
+#define NEED_PSE	0
+#define NEED_MSR	(1<<(X86_FEATURE_MSR & 31))
+#define NEED_PGE	(1<<(X86_FEATURE_PGE & 31))
+#define NEED_FXSR	(1<<(X86_FEATURE_FXSR & 31))
+#define NEED_XMM	(1<<(X86_FEATURE_XMM & 31))
+#define NEED_XMM2	(1<<(X86_FEATURE_XMM2 & 31))
+#define NEED_LM		(1<<(X86_FEATURE_LM & 31))
+#else
+#define NEED_PSE	0
+#define NEED_MSR	0
+#define NEED_PGE	0
+#define NEED_FXSR	0
+#define NEED_XMM	0
+#define NEED_XMM2	0
+#define NEED_LM		0
+#endif
+
+#define REQUIRED_MASK0	(NEED_FPU|NEED_PSE|NEED_MSR|NEED_PAE|\
+			 NEED_CX8|NEED_PGE|NEED_FXSR|NEED_CMOV|\
+			 NEED_XMM|NEED_XMM2)
+#define SSE_MASK	(NEED_XMM|NEED_XMM2)
+
+#define REQUIRED_MASK1	(NEED_LM|NEED_3DNOW)
+
+#define REQUIRED_MASK2	0
+#define REQUIRED_MASK3	(NEED_NOPL)
+#define REQUIRED_MASK4	0
+#define REQUIRED_MASK5	0
+#define REQUIRED_MASK6	0
+#define REQUIRED_MASK7	0
+
+#endif /* _ASM_X86_REQUIRED_FEATURES_H */
diff --git a/arch/x86/include/asm/resource.h b/arch/x86/include/asm/resource.h
new file mode 100644
index 0000000..04bc4db
--- /dev/null
+++ b/arch/x86/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/arch/x86/include/asm/resume-trace.h b/arch/x86/include/asm/resume-trace.h
new file mode 100644
index 0000000..3ff1c2c
--- /dev/null
+++ b/arch/x86/include/asm/resume-trace.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_RESUME_TRACE_H
+#define _ASM_X86_RESUME_TRACE_H
+
+#include <asm/asm.h>
+
+#define TRACE_RESUME(user)					\
+do {								\
+	if (pm_trace_enabled) {					\
+		const void *tracedata;				\
+		asm volatile(_ASM_MOV " $1f,%0\n"		\
+			     ".section .tracedata,\"a\"\n"	\
+			     "1:\t.word %c1\n\t"		\
+			     _ASM_PTR " %c2\n"			\
+			     ".previous"			\
+			     :"=r" (tracedata)			\
+			     : "i" (__LINE__), "i" (__FILE__));	\
+		generate_resume_trace(tracedata, user);		\
+	}							\
+} while (0)
+
+#endif /* _ASM_X86_RESUME_TRACE_H */
diff --git a/arch/x86/include/asm/rio.h b/arch/x86/include/asm/rio.h
new file mode 100644
index 0000000..97bab63
--- /dev/null
+++ b/arch/x86/include/asm/rio.h
@@ -0,0 +1,63 @@
+/*
+ * Derived from include/asm-x86/mach-summit/mach_mpparse.h
+ *          and include/asm-x86/mach-default/bios_ebda.h
+ *
+ * Author: Laurent Vivier <Laurent.Vivier@bull.net>
+ */
+
+#ifndef _ASM_X86_RIO_H
+#define _ASM_X86_RIO_H
+
+#define RIO_TABLE_VERSION	3
+
+struct rio_table_hdr {
+	u8 version;		/* Version number of this data structure  */
+	u8 num_scal_dev;	/* # of Scalability devices               */
+	u8 num_rio_dev;		/* # of RIO I/O devices                   */
+} __attribute__((packed));
+
+struct scal_detail {
+	u8 node_id;		/* Scalability Node ID                    */
+	u32 CBAR;		/* Address of 1MB register space          */
+	u8 port0node;		/* Node ID port connected to: 0xFF=None   */
+	u8 port0port;		/* Port num port connected to: 0,1,2, or  */
+				/* 0xFF=None                              */
+	u8 port1node;		/* Node ID port connected to: 0xFF = None */
+	u8 port1port;		/* Port num port connected to: 0,1,2, or  */
+				/* 0xFF=None                              */
+	u8 port2node;		/* Node ID port connected to: 0xFF = None */
+	u8 port2port;		/* Port num port connected to: 0,1,2, or  */
+				/* 0xFF=None                              */
+	u8 chassis_num;		/* 1 based Chassis number (1 = boot node) */
+} __attribute__((packed));
+
+struct rio_detail {
+	u8 node_id;		/* RIO Node ID                            */
+	u32 BBAR;		/* Address of 1MB register space          */
+	u8 type;		/* Type of device                         */
+	u8 owner_id;		/* Node ID of Hurricane that owns this    */
+				/* node                                   */
+	u8 port0node;		/* Node ID port connected to: 0xFF=None   */
+	u8 port0port;		/* Port num port connected to: 0,1,2, or  */
+				/* 0xFF=None                              */
+	u8 port1node;		/* Node ID port connected to: 0xFF=None   */
+	u8 port1port;		/* Port num port connected to: 0,1,2, or  */
+				/* 0xFF=None                              */
+	u8 first_slot;		/* Lowest slot number below this Calgary  */
+	u8 status;		/* Bit 0 = 1 : the XAPIC is used          */
+				/*       = 0 : the XAPIC is not used, ie: */
+				/*            ints fwded to another XAPIC */
+				/*           Bits1:7 Reserved             */
+	u8 WP_index;		/* instance index - lower ones have       */
+				/*     lower slot numbers/PCI bus numbers */
+	u8 chassis_num;		/* 1 based Chassis number                 */
+} __attribute__((packed));
+
+enum {
+	HURR_SCALABILTY	= 0,	/* Hurricane Scalability info */
+	HURR_RIOIB	= 2,	/* Hurricane RIOIB info       */
+	COMPAT_CALGARY	= 4,	/* Compatibility Calgary      */
+	ALT_CALGARY	= 5,	/* Second Planar Calgary      */
+};
+
+#endif /* _ASM_X86_RIO_H */
diff --git a/arch/x86/include/asm/rtc.h b/arch/x86/include/asm/rtc.h
new file mode 100644
index 0000000..f71c3b0
--- /dev/null
+++ b/arch/x86/include/asm/rtc.h
@@ -0,0 +1 @@
+#include <asm-generic/rtc.h>
diff --git a/arch/x86/include/asm/rwlock.h b/arch/x86/include/asm/rwlock.h
new file mode 100644
index 0000000..6a8c0d6
--- /dev/null
+++ b/arch/x86/include/asm/rwlock.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_X86_RWLOCK_H
+#define _ASM_X86_RWLOCK_H
+
+#define RW_LOCK_BIAS		 0x01000000
+
+/* Actual code is in asm/spinlock.h or in arch/x86/lib/rwlock.S */
+
+#endif /* _ASM_X86_RWLOCK_H */
diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
new file mode 100644
index 0000000..ca7517d
--- /dev/null
+++ b/arch/x86/include/asm/rwsem.h
@@ -0,0 +1,265 @@
+/* rwsem.h: R/W semaphores implemented using XADD/CMPXCHG for i486+
+ *
+ * Written by David Howells (dhowells@redhat.com).
+ *
+ * Derived from asm-x86/semaphore.h
+ *
+ *
+ * The MSW of the count is the negated number of active writers and waiting
+ * lockers, and the LSW is the total number of active locks
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an
+ * uncontended lock. This can be determined because XADD returns the old value.
+ * Readers increment by 1 and see a positive value when uncontended, negative
+ * if there are writers (and maybe) readers waiting (in which case it goes to
+ * sleep).
+ *
+ * The value of WAITING_BIAS supports up to 32766 waiting processes. This can
+ * be extended to 65534 by manually checking the whole MSW rather than relying
+ * on the S flag.
+ *
+ * The value of ACTIVE_BIAS supports up to 65535 active processes.
+ *
+ * This should be totally fair - if anything is waiting, a process that wants a
+ * lock will go to the back of the queue. When the currently active lock is
+ * released, if there's a writer at the front of the queue, then that and only
+ * that will be woken up; if there's a bunch of consequtive readers at the
+ * front, then they'll all be woken up, but no other readers will be.
+ */
+
+#ifndef _ASM_X86_RWSEM_H
+#define _ASM_X86_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/lockdep.h>
+
+struct rwsem_waiter;
+
+extern asmregparm struct rw_semaphore *
+ rwsem_down_read_failed(struct rw_semaphore *sem);
+extern asmregparm struct rw_semaphore *
+ rwsem_down_write_failed(struct rw_semaphore *sem);
+extern asmregparm struct rw_semaphore *
+ rwsem_wake(struct rw_semaphore *);
+extern asmregparm struct rw_semaphore *
+ rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+/*
+ * the semaphore definition
+ */
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+struct rw_semaphore {
+	signed long		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+
+#define __RWSEM_INITIALIZER(name)				\
+{								\
+	RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+	LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) \
+}
+
+#define DECLARE_RWSEM(name)					\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)						\
+do {								\
+	static struct lock_class_key __key;			\
+								\
+	__init_rwsem((sem), #sem, &__key);			\
+} while (0)
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	asm volatile("# beginning down_read\n\t"
+		     LOCK_PREFIX "  incl      (%%eax)\n\t"
+		     /* adds 0x00000001, returns the old value */
+		     "  jns        1f\n"
+		     "  call call_rwsem_down_read_failed\n"
+		     "1:\n\t"
+		     "# ending down_read\n\t"
+		     : "+m" (sem->count)
+		     : "a" (sem)
+		     : "memory", "cc");
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	__s32 result, tmp;
+	asm volatile("# beginning __down_read_trylock\n\t"
+		     "  movl      %0,%1\n\t"
+		     "1:\n\t"
+		     "  movl	     %1,%2\n\t"
+		     "  addl      %3,%2\n\t"
+		     "  jle	     2f\n\t"
+		     LOCK_PREFIX "  cmpxchgl  %2,%0\n\t"
+		     "  jnz	     1b\n\t"
+		     "2:\n\t"
+		     "# ending __down_read_trylock\n\t"
+		     : "+m" (sem->count), "=&a" (result), "=&r" (tmp)
+		     : "i" (RWSEM_ACTIVE_READ_BIAS)
+		     : "memory", "cc");
+	return result >= 0 ? 1 : 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	int tmp;
+
+	tmp = RWSEM_ACTIVE_WRITE_BIAS;
+	asm volatile("# beginning down_write\n\t"
+		     LOCK_PREFIX "  xadd      %%edx,(%%eax)\n\t"
+		     /* subtract 0x0000ffff, returns the old value */
+		     "  testl     %%edx,%%edx\n\t"
+		     /* was the count 0 before? */
+		     "  jz        1f\n"
+		     "  call call_rwsem_down_write_failed\n"
+		     "1:\n"
+		     "# ending down_write"
+		     : "+m" (sem->count), "=d" (tmp)
+		     : "a" (sem), "1" (tmp)
+		     : "memory", "cc");
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	__down_write_nested(sem, 0);
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	signed long ret = cmpxchg(&sem->count,
+				  RWSEM_UNLOCKED_VALUE,
+				  RWSEM_ACTIVE_WRITE_BIAS);
+	if (ret == RWSEM_UNLOCKED_VALUE)
+		return 1;
+	return 0;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	__s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
+	asm volatile("# beginning __up_read\n\t"
+		     LOCK_PREFIX "  xadd      %%edx,(%%eax)\n\t"
+		     /* subtracts 1, returns the old value */
+		     "  jns        1f\n\t"
+		     "  call call_rwsem_wake\n"
+		     "1:\n"
+		     "# ending __up_read\n"
+		     : "+m" (sem->count), "=d" (tmp)
+		     : "a" (sem), "1" (tmp)
+		     : "memory", "cc");
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	asm volatile("# beginning __up_write\n\t"
+		     "  movl      %2,%%edx\n\t"
+		     LOCK_PREFIX "  xaddl     %%edx,(%%eax)\n\t"
+		     /* tries to transition
+			0xffff0001 -> 0x00000000 */
+		     "  jz       1f\n"
+		     "  call call_rwsem_wake\n"
+		     "1:\n\t"
+		     "# ending __up_write\n"
+		     : "+m" (sem->count)
+		     : "a" (sem), "i" (-RWSEM_ACTIVE_WRITE_BIAS)
+		     : "memory", "cc", "edx");
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	asm volatile("# beginning __downgrade_write\n\t"
+		     LOCK_PREFIX "  addl      %2,(%%eax)\n\t"
+		     /* transitions 0xZZZZ0001 -> 0xYYYY0001 */
+		     "  jns       1f\n\t"
+		     "  call call_rwsem_downgrade_wake\n"
+		     "1:\n\t"
+		     "# ending __downgrade_write\n"
+		     : "+m" (sem->count)
+		     : "a" (sem), "i" (-RWSEM_WAITING_BIAS)
+		     : "memory", "cc");
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	asm volatile(LOCK_PREFIX "addl %1,%0"
+		     : "+m" (sem->count)
+		     : "ir" (delta));
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	int tmp = delta;
+
+	asm volatile(LOCK_PREFIX "xadd %0,%1"
+		     : "+r" (tmp), "+m" (sem->count)
+		     : : "memory");
+
+	return tmp + delta;
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_X86_RWSEM_H */
diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h
new file mode 100644
index 0000000..263d397
--- /dev/null
+++ b/arch/x86/include/asm/scatterlist.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_X86_SCATTERLIST_H
+#define _ASM_X86_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	unsigned int	length;
+	dma_addr_t	dma_address;
+	unsigned int	dma_length;
+};
+
+#define ARCH_HAS_SG_CHAIN
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#ifdef CONFIG_X86_32
+# define sg_dma_len(sg)		((sg)->length)
+#else
+# define sg_dma_len(sg)		((sg)->dma_length)
+#endif
+
+#endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/seccomp.h b/arch/x86/include/asm/seccomp.h
new file mode 100644
index 0000000..c62e58a
--- /dev/null
+++ b/arch/x86/include/asm/seccomp.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "seccomp_32.h"
+#else
+# include "seccomp_64.h"
+#endif
diff --git a/arch/x86/include/asm/seccomp_32.h b/arch/x86/include/asm/seccomp_32.h
new file mode 100644
index 0000000..a6ad87b
--- /dev/null
+++ b/arch/x86/include/asm/seccomp_32.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_X86_SECCOMP_32_H
+#define _ASM_X86_SECCOMP_32_H
+
+#include <linux/thread_info.h>
+
+#ifdef TIF_32BIT
+#error "unexpected TIF_32BIT on i386"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_sigreturn
+
+#endif /* _ASM_X86_SECCOMP_32_H */
diff --git a/arch/x86/include/asm/seccomp_64.h b/arch/x86/include/asm/seccomp_64.h
new file mode 100644
index 0000000..4171bb7
--- /dev/null
+++ b/arch/x86/include/asm/seccomp_64.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_X86_SECCOMP_64_H
+#define _ASM_X86_SECCOMP_64_H
+
+#include <linux/thread_info.h>
+
+#ifdef TIF_32BIT
+#error "unexpected TIF_32BIT on x86_64"
+#else
+#define TIF_32BIT TIF_IA32
+#endif
+
+#include <linux/unistd.h>
+#include <asm/ia32_unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_ia32_read
+#define __NR_seccomp_write_32 __NR_ia32_write
+#define __NR_seccomp_exit_32 __NR_ia32_exit
+#define __NR_seccomp_sigreturn_32 __NR_ia32_sigreturn
+
+#endif /* _ASM_X86_SECCOMP_64_H */
diff --git a/arch/x86/include/asm/sections.h b/arch/x86/include/asm/sections.h
new file mode 100644
index 0000000..2b8c516
--- /dev/null
+++ b/arch/x86/include/asm/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
new file mode 100644
index 0000000..1dc1b51
--- /dev/null
+++ b/arch/x86/include/asm/segment.h
@@ -0,0 +1,209 @@
+#ifndef _ASM_X86_SEGMENT_H
+#define _ASM_X86_SEGMENT_H
+
+/* Constructor for a conventional segment GDT (or LDT) entry */
+/* This is a macro so it can be used in initializers */
+#define GDT_ENTRY(flags, base, limit)			\
+	((((base)  & 0xff000000ULL) << (56-24)) |	\
+	 (((flags) & 0x0000f0ffULL) << 40) |		\
+	 (((limit) & 0x000f0000ULL) << (48-16)) |	\
+	 (((base)  & 0x00ffffffULL) << 16) |		\
+	 (((limit) & 0x0000ffffULL)))
+
+/* Simple and small GDT entries for booting only */
+
+#define GDT_ENTRY_BOOT_CS	2
+#define __BOOT_CS		(GDT_ENTRY_BOOT_CS * 8)
+
+#define GDT_ENTRY_BOOT_DS	(GDT_ENTRY_BOOT_CS + 1)
+#define __BOOT_DS		(GDT_ENTRY_BOOT_DS * 8)
+
+#define GDT_ENTRY_BOOT_TSS	(GDT_ENTRY_BOOT_CS + 2)
+#define __BOOT_TSS		(GDT_ENTRY_BOOT_TSS * 8)
+
+#ifdef CONFIG_X86_32
+/*
+ * The layout of the per-CPU GDT under Linux:
+ *
+ *   0 - null
+ *   1 - reserved
+ *   2 - reserved
+ *   3 - reserved
+ *
+ *   4 - unused			<==== new cacheline
+ *   5 - unused
+ *
+ *  ------- start of TLS (Thread-Local Storage) segments:
+ *
+ *   6 - TLS segment #1			[ glibc's TLS segment ]
+ *   7 - TLS segment #2			[ Wine's %fs Win32 segment ]
+ *   8 - TLS segment #3
+ *   9 - reserved
+ *  10 - reserved
+ *  11 - reserved
+ *
+ *  ------- start of kernel segments:
+ *
+ *  12 - kernel code segment		<==== new cacheline
+ *  13 - kernel data segment
+ *  14 - default user CS
+ *  15 - default user DS
+ *  16 - TSS
+ *  17 - LDT
+ *  18 - PNPBIOS support (16->32 gate)
+ *  19 - PNPBIOS support
+ *  20 - PNPBIOS support
+ *  21 - PNPBIOS support
+ *  22 - PNPBIOS support
+ *  23 - APM BIOS support
+ *  24 - APM BIOS support
+ *  25 - APM BIOS support
+ *
+ *  26 - ESPFIX small SS
+ *  27 - per-cpu			[ offset to per-cpu data area ]
+ *  28 - unused
+ *  29 - unused
+ *  30 - unused
+ *  31 - TSS for double fault handler
+ */
+#define GDT_ENTRY_TLS_MIN	6
+#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
+#define GDT_ENTRY_DEFAULT_USER_CS	14
+
+#define GDT_ENTRY_DEFAULT_USER_DS	15
+
+#define GDT_ENTRY_KERNEL_BASE	12
+
+#define GDT_ENTRY_KERNEL_CS		(GDT_ENTRY_KERNEL_BASE + 0)
+
+#define GDT_ENTRY_KERNEL_DS		(GDT_ENTRY_KERNEL_BASE + 1)
+
+#define GDT_ENTRY_TSS			(GDT_ENTRY_KERNEL_BASE + 4)
+#define GDT_ENTRY_LDT			(GDT_ENTRY_KERNEL_BASE + 5)
+
+#define GDT_ENTRY_PNPBIOS_BASE		(GDT_ENTRY_KERNEL_BASE + 6)
+#define GDT_ENTRY_APMBIOS_BASE		(GDT_ENTRY_KERNEL_BASE + 11)
+
+#define GDT_ENTRY_ESPFIX_SS		(GDT_ENTRY_KERNEL_BASE + 14)
+#define __ESPFIX_SS (GDT_ENTRY_ESPFIX_SS * 8)
+
+#define GDT_ENTRY_PERCPU			(GDT_ENTRY_KERNEL_BASE + 15)
+#ifdef CONFIG_SMP
+#define __KERNEL_PERCPU (GDT_ENTRY_PERCPU * 8)
+#else
+#define __KERNEL_PERCPU 0
+#endif
+
+#define GDT_ENTRY_DOUBLEFAULT_TSS	31
+
+/*
+ * The GDT has 32 entries
+ */
+#define GDT_ENTRIES 32
+
+/* The PnP BIOS entries in the GDT */
+#define GDT_ENTRY_PNPBIOS_CS32		(GDT_ENTRY_PNPBIOS_BASE + 0)
+#define GDT_ENTRY_PNPBIOS_CS16		(GDT_ENTRY_PNPBIOS_BASE + 1)
+#define GDT_ENTRY_PNPBIOS_DS		(GDT_ENTRY_PNPBIOS_BASE + 2)
+#define GDT_ENTRY_PNPBIOS_TS1		(GDT_ENTRY_PNPBIOS_BASE + 3)
+#define GDT_ENTRY_PNPBIOS_TS2		(GDT_ENTRY_PNPBIOS_BASE + 4)
+
+/* The PnP BIOS selectors */
+#define PNP_CS32   (GDT_ENTRY_PNPBIOS_CS32 * 8)	/* segment for calling fn */
+#define PNP_CS16   (GDT_ENTRY_PNPBIOS_CS16 * 8)	/* code segment for BIOS */
+#define PNP_DS     (GDT_ENTRY_PNPBIOS_DS * 8)	/* data segment for BIOS */
+#define PNP_TS1    (GDT_ENTRY_PNPBIOS_TS1 * 8)	/* transfer data segment */
+#define PNP_TS2    (GDT_ENTRY_PNPBIOS_TS2 * 8)	/* another data segment */
+
+/* Bottom two bits of selector give the ring privilege level */
+#define SEGMENT_RPL_MASK	0x3
+/* Bit 2 is table indicator (LDT/GDT) */
+#define SEGMENT_TI_MASK		0x4
+
+/* User mode is privilege level 3 */
+#define USER_RPL		0x3
+/* LDT segment has TI set, GDT has it cleared */
+#define SEGMENT_LDT		0x4
+#define SEGMENT_GDT		0x0
+
+/*
+ * Matching rules for certain types of segments.
+ */
+
+/* Matches PNP_CS32 and PNP_CS16 (they must be consecutive) */
+#define SEGMENT_IS_PNP_CODE(x)   (((x) & 0xf4) == GDT_ENTRY_PNPBIOS_BASE * 8)
+
+
+#else
+#include <asm/cache.h>
+
+#define GDT_ENTRY_KERNEL32_CS 1
+#define GDT_ENTRY_KERNEL_CS 2
+#define GDT_ENTRY_KERNEL_DS 3
+
+#define __KERNEL32_CS   (GDT_ENTRY_KERNEL32_CS * 8)
+
+/*
+ * we cannot use the same code segment descriptor for user and kernel
+ * -- not even in the long flat mode, because of different DPL /kkeil
+ * The segment offset needs to contain a RPL. Grr. -AK
+ * GDT layout to get 64bit syscall right (sysret hardcodes gdt offsets)
+ */
+#define GDT_ENTRY_DEFAULT_USER32_CS 4
+#define GDT_ENTRY_DEFAULT_USER_DS 5
+#define GDT_ENTRY_DEFAULT_USER_CS 6
+#define __USER32_CS   (GDT_ENTRY_DEFAULT_USER32_CS * 8 + 3)
+#define __USER32_DS	__USER_DS
+
+#define GDT_ENTRY_TSS 8	/* needs two entries */
+#define GDT_ENTRY_LDT 10 /* needs two entries */
+#define GDT_ENTRY_TLS_MIN 12
+#define GDT_ENTRY_TLS_MAX 14
+
+#define GDT_ENTRY_PER_CPU 15	/* Abused to load per CPU data from limit */
+#define __PER_CPU_SEG	(GDT_ENTRY_PER_CPU * 8 + 3)
+
+/* TLS indexes for 64bit - hardcoded in arch_prctl */
+#define FS_TLS 0
+#define GS_TLS 1
+
+#define GS_TLS_SEL ((GDT_ENTRY_TLS_MIN+GS_TLS)*8 + 3)
+#define FS_TLS_SEL ((GDT_ENTRY_TLS_MIN+FS_TLS)*8 + 3)
+
+#define GDT_ENTRIES 16
+
+#endif
+
+#define __KERNEL_CS	(GDT_ENTRY_KERNEL_CS * 8)
+#define __KERNEL_DS	(GDT_ENTRY_KERNEL_DS * 8)
+#define __USER_DS     (GDT_ENTRY_DEFAULT_USER_DS* 8 + 3)
+#define __USER_CS     (GDT_ENTRY_DEFAULT_USER_CS* 8 + 3)
+#ifndef CONFIG_PARAVIRT
+#define get_kernel_rpl()  0
+#endif
+
+/* User mode is privilege level 3 */
+#define USER_RPL		0x3
+/* LDT segment has TI set, GDT has it cleared */
+#define SEGMENT_LDT		0x4
+#define SEGMENT_GDT		0x0
+
+/* Bottom two bits of selector give the ring privilege level */
+#define SEGMENT_RPL_MASK	0x3
+/* Bit 2 is table indicator (LDT/GDT) */
+#define SEGMENT_TI_MASK		0x4
+
+#define IDT_ENTRIES 256
+#define NUM_EXCEPTION_VECTORS 32
+#define GDT_SIZE (GDT_ENTRIES * 8)
+#define GDT_ENTRY_TLS_ENTRIES 3
+#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][10];
+#endif
+#endif
+
+#endif /* _ASM_X86_SEGMENT_H */
diff --git a/arch/x86/include/asm/sembuf.h b/arch/x86/include/asm/sembuf.h
new file mode 100644
index 0000000..ee50c80
--- /dev/null
+++ b/arch/x86/include/asm/sembuf.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_X86_SEMBUF_H
+#define _ASM_X86_SEMBUF_H
+
+/*
+ * The semid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;	/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;	/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;	/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_X86_SEMBUF_H */
diff --git a/arch/x86/include/asm/serial.h b/arch/x86/include/asm/serial.h
new file mode 100644
index 0000000..628c801
--- /dev/null
+++ b/arch/x86/include/asm/serial.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_X86_SERIAL_H
+#define _ASM_X86_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#define SERIAL_PORT_DFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+
+#endif /* _ASM_X86_SERIAL_H */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
new file mode 100644
index 0000000..f12d372
--- /dev/null
+++ b/arch/x86/include/asm/setup.h
@@ -0,0 +1,105 @@
+#ifndef _ASM_X86_SETUP_H
+#define _ASM_X86_SETUP_H
+
+#define COMMAND_LINE_SIZE 2048
+
+#ifndef __ASSEMBLY__
+
+/* Interrupt control for vSMPowered x86_64 systems */
+void vsmp_init(void);
+
+#ifdef CONFIG_X86_VISWS
+extern void visws_early_detect(void);
+extern int is_visws_box(void);
+#else
+static inline void visws_early_detect(void) { }
+static inline int is_visws_box(void) { return 0; }
+#endif
+
+/*
+ * Any setup quirks to be performed?
+ */
+struct mpc_config_processor;
+struct mpc_config_bus;
+struct mp_config_oemtable;
+struct x86_quirks {
+	int (*arch_pre_time_init)(void);
+	int (*arch_time_init)(void);
+	int (*arch_pre_intr_init)(void);
+	int (*arch_intr_init)(void);
+	int (*arch_trap_init)(void);
+	char * (*arch_memory_setup)(void);
+	int (*mach_get_smp_config)(unsigned int early);
+	int (*mach_find_smp_config)(unsigned int reserve);
+
+	int *mpc_record;
+	int (*mpc_apic_id)(struct mpc_config_processor *m);
+	void (*mpc_oem_bus_info)(struct mpc_config_bus *m, char *name);
+	void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
+	void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
+                                    unsigned short oemsize);
+	int (*setup_ioapic_ids)(void);
+};
+
+extern struct x86_quirks *x86_quirks;
+extern unsigned long saved_video_mode;
+
+#ifndef CONFIG_PARAVIRT
+#define paravirt_post_allocator_init()	do {} while (0)
+#endif
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifdef __i386__
+
+#include <linux/pfn.h>
+/*
+ * Reserved space for vmalloc and iomap - defined in asm/page.h
+ */
+#define MAXMEM_PFN	PFN_DOWN(MAXMEM)
+#define MAX_NONPAE_PFN	(1 << 20)
+
+#endif /* __i386__ */
+
+#define PARAM_SIZE 4096		/* sizeof(struct boot_params) */
+
+#define OLD_CL_MAGIC		0xA33F
+#define OLD_CL_ADDRESS		0x020	/* Relative to real mode data */
+#define NEW_CL_POINTER		0x228	/* Relative to real mode data */
+
+#ifndef __ASSEMBLY__
+#include <asm/bootparam.h>
+
+#ifndef _SETUP
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+extern struct boot_params boot_params;
+
+/*
+ * Do NOT EVER look at the BIOS memory size location.
+ * It does not work on many machines.
+ */
+#define LOWMEMSIZE()	(0x9f000)
+
+#ifdef __i386__
+
+void __init i386_start_kernel(void);
+extern void probe_roms(void);
+
+extern unsigned long init_pg_tables_start;
+extern unsigned long init_pg_tables_end;
+
+#else
+void __init x86_64_init_pda(void);
+void __init x86_64_start_kernel(char *real_mode);
+void __init x86_64_start_reservations(char *real_mode_data);
+
+#endif /* __i386__ */
+#endif /* _SETUP */
+#endif /* __ASSEMBLY__ */
+#endif  /*  __KERNEL__  */
+
+#endif /* _ASM_X86_SETUP_H */
diff --git a/arch/x86/include/asm/shmbuf.h b/arch/x86/include/asm/shmbuf.h
new file mode 100644
index 0000000..b51413b
--- /dev/null
+++ b/arch/x86/include/asm/shmbuf.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_X86_SHMBUF_H
+#define _ASM_X86_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space on 32 bit is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ *
+ * Pad space on 64 bit is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+#ifdef __i386__
+	unsigned long		__unused1;
+#endif
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#ifdef __i386__
+	unsigned long		__unused2;
+#endif
+	__kernel_time_t		shm_ctime;	/* last change time */
+#ifdef __i386__
+	unsigned long		__unused3;
+#endif
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_X86_SHMBUF_H */
diff --git a/arch/x86/include/asm/shmparam.h b/arch/x86/include/asm/shmparam.h
new file mode 100644
index 0000000..0880cf0
--- /dev/null
+++ b/arch/x86/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_X86_SHMPARAM_H
+#define _ASM_X86_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE	 /* attach addr a multiple of this */
+
+#endif /* _ASM_X86_SHMPARAM_H */
diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h
new file mode 100644
index 0000000..0afcb5e
--- /dev/null
+++ b/arch/x86/include/asm/sigcontext.h
@@ -0,0 +1,284 @@
+#ifndef _ASM_X86_SIGCONTEXT_H
+#define _ASM_X86_SIGCONTEXT_H
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+
+#define FP_XSTATE_MAGIC1	0x46505853U
+#define FP_XSTATE_MAGIC2	0x46505845U
+#define FP_XSTATE_MAGIC2_SIZE	sizeof(FP_XSTATE_MAGIC2)
+
+/*
+ * bytes 464..511 in the current 512byte layout of fxsave/fxrstor frame
+ * are reserved for SW usage. On cpu's supporting xsave/xrstor, these bytes
+ * are used to extended the fpstate pointer in the sigcontext, which now
+ * includes the extended state information along with fpstate information.
+ *
+ * Presence of FP_XSTATE_MAGIC1 at the beginning of this SW reserved
+ * area and FP_XSTATE_MAGIC2 at the end of memory layout
+ * (extended_size - FP_XSTATE_MAGIC2_SIZE) indicates the presence of the
+ * extended state information in the memory layout pointed by the fpstate
+ * pointer in sigcontext.
+ */
+struct _fpx_sw_bytes {
+	__u32 magic1;		/* FP_XSTATE_MAGIC1 */
+	__u32 extended_size;	/* total size of the layout referred by
+				 * fpstate pointer in the sigcontext.
+				 */
+	__u64 xstate_bv;
+				/* feature bit mask (including fp/sse/extended
+				 * state) that is present in the memory
+				 * layout.
+				 */
+	__u32 xstate_size;	/* actual xsave state size, based on the
+				 * features saved in the layout.
+				 * 'extended_size' will be greater than
+				 * 'xstate_size'.
+				 */
+	__u32 padding[7];	/*  for future use. */
+};
+
+#ifdef __i386__
+/*
+ * As documented in the iBCS2 standard..
+ *
+ * The first part of "struct _fpstate" is just the normal i387
+ * hardware setup, the extra "status" word is used to save the
+ * coprocessor status word before entering the handler.
+ *
+ * Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * The FPU state data structure has had to grow to accommodate the
+ * extended FPU state required by the Streaming SIMD Extensions.
+ * There is no documented standard to accomplish this at the moment.
+ */
+struct _fpreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+};
+
+struct _fpxreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+	unsigned short padding[3];
+};
+
+struct _xmmreg {
+	unsigned long element[4];
+};
+
+struct _fpstate {
+	/* Regular FPU environment */
+	unsigned long	cw;
+	unsigned long	sw;
+	unsigned long	tag;
+	unsigned long	ipoff;
+	unsigned long	cssel;
+	unsigned long	dataoff;
+	unsigned long	datasel;
+	struct _fpreg	_st[8];
+	unsigned short	status;
+	unsigned short	magic;		/* 0xffff = regular FPU data only */
+
+	/* FXSR FPU environment */
+	unsigned long	_fxsr_env[6];	/* FXSR FPU env is ignored */
+	unsigned long	mxcsr;
+	unsigned long	reserved;
+	struct _fpxreg	_fxsr_st[8];	/* FXSR FPU reg data is ignored */
+	struct _xmmreg	_xmm[8];
+	unsigned long	padding1[44];
+
+	union {
+		unsigned long	padding2[12];
+		struct _fpx_sw_bytes sw_reserved; /* represents the extended
+						   * state info */
+	};
+};
+
+#define X86_FXSR_MAGIC		0x0000
+
+#ifdef __KERNEL__
+struct sigcontext {
+	unsigned short gs, __gsh;
+	unsigned short fs, __fsh;
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned long di;
+	unsigned long si;
+	unsigned long bp;
+	unsigned long sp;
+	unsigned long bx;
+	unsigned long dx;
+	unsigned long cx;
+	unsigned long ax;
+	unsigned long trapno;
+	unsigned long err;
+	unsigned long ip;
+	unsigned short cs, __csh;
+	unsigned long flags;
+	unsigned long sp_at_signal;
+	unsigned short ss, __ssh;
+
+	/*
+	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
+	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
+	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
+	 * of extended memory layout. See comments at the defintion of
+	 * (struct _fpx_sw_bytes)
+	 */
+	void __user *fpstate;		/* zero when no FPU/extended context */
+	unsigned long oldmask;
+	unsigned long cr2;
+};
+#else /* __KERNEL__ */
+/*
+ * User-space might still rely on the old definition:
+ */
+struct sigcontext {
+	unsigned short gs, __gsh;
+	unsigned short fs, __fsh;
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned long edi;
+	unsigned long esi;
+	unsigned long ebp;
+	unsigned long esp;
+	unsigned long ebx;
+	unsigned long edx;
+	unsigned long ecx;
+	unsigned long eax;
+	unsigned long trapno;
+	unsigned long err;
+	unsigned long eip;
+	unsigned short cs, __csh;
+	unsigned long eflags;
+	unsigned long esp_at_signal;
+	unsigned short ss, __ssh;
+	struct _fpstate __user *fpstate;
+	unsigned long oldmask;
+	unsigned long cr2;
+};
+#endif /* !__KERNEL__ */
+
+#else /* __i386__ */
+
+/* FXSAVE frame */
+/* Note: reserved1/2 may someday contain valuable data. Always save/restore
+   them when you change signal frames. */
+struct _fpstate {
+	__u16	cwd;
+	__u16	swd;
+	__u16	twd;		/* Note this is not the same as the
+				   32bit/x87/FSAVE twd */
+	__u16	fop;
+	__u64	rip;
+	__u64	rdp;
+	__u32	mxcsr;
+	__u32	mxcsr_mask;
+	__u32	st_space[32];	/* 8*16 bytes for each FP-reg */
+	__u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg  */
+	__u32	reserved2[12];
+	union {
+		__u32	reserved3[12];
+		struct _fpx_sw_bytes sw_reserved; /* represents the extended
+						   * state information */
+	};
+};
+
+#ifdef __KERNEL__
+struct sigcontext {
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	unsigned long r13;
+	unsigned long r14;
+	unsigned long r15;
+	unsigned long di;
+	unsigned long si;
+	unsigned long bp;
+	unsigned long bx;
+	unsigned long dx;
+	unsigned long ax;
+	unsigned long cx;
+	unsigned long sp;
+	unsigned long ip;
+	unsigned long flags;
+	unsigned short cs;
+	unsigned short gs;
+	unsigned short fs;
+	unsigned short __pad0;
+	unsigned long err;
+	unsigned long trapno;
+	unsigned long oldmask;
+	unsigned long cr2;
+
+	/*
+	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
+	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
+	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
+	 * of extended memory layout. See comments at the defintion of
+	 * (struct _fpx_sw_bytes)
+	 */
+	void __user *fpstate;		/* zero when no FPU/extended context */
+	unsigned long reserved1[8];
+};
+#else /* __KERNEL__ */
+/*
+ * User-space might still rely on the old definition:
+ */
+struct sigcontext {
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	unsigned long r13;
+	unsigned long r14;
+	unsigned long r15;
+	unsigned long rdi;
+	unsigned long rsi;
+	unsigned long rbp;
+	unsigned long rbx;
+	unsigned long rdx;
+	unsigned long rax;
+	unsigned long rcx;
+	unsigned long rsp;
+	unsigned long rip;
+	unsigned long eflags;		/* RFLAGS */
+	unsigned short cs;
+	unsigned short gs;
+	unsigned short fs;
+	unsigned short __pad0;
+	unsigned long err;
+	unsigned long trapno;
+	unsigned long oldmask;
+	unsigned long cr2;
+	struct _fpstate __user *fpstate;	/* zero when no FPU context */
+	unsigned long reserved1[8];
+};
+#endif /* !__KERNEL__ */
+
+#endif /* !__i386__ */
+
+struct _xsave_hdr {
+	__u64 xstate_bv;
+	__u64 reserved1[2];
+	__u64 reserved2[5];
+};
+
+/*
+ * Extended state pointed by the fpstate pointer in the sigcontext.
+ * In addition to the fpstate, information encoded in the xstate_hdr
+ * indicates the presence of other extended state information
+ * supported by the processor and OS.
+ */
+struct _xstate {
+	struct _fpstate fpstate;
+	struct _xsave_hdr xstate_hdr;
+	/* new processor state extensions go here */
+};
+
+#endif /* _ASM_X86_SIGCONTEXT_H */
diff --git a/arch/x86/include/asm/sigcontext32.h b/arch/x86/include/asm/sigcontext32.h
new file mode 100644
index 0000000..6126188
--- /dev/null
+++ b/arch/x86/include/asm/sigcontext32.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_X86_SIGCONTEXT32_H
+#define _ASM_X86_SIGCONTEXT32_H
+
+/* signal context for 32bit programs. */
+
+#define X86_FXSR_MAGIC		0x0000
+
+struct _fpreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+};
+
+struct _fpxreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+	unsigned short padding[3];
+};
+
+struct _xmmreg {
+	__u32	element[4];
+};
+
+/* FSAVE frame with extensions */
+struct _fpstate_ia32 {
+	/* Regular FPU environment */
+	__u32 	cw;
+	__u32	sw;
+	__u32	tag;	/* not compatible to 64bit twd */
+	__u32	ipoff;
+	__u32	cssel;
+	__u32	dataoff;
+	__u32	datasel;
+	struct _fpreg	_st[8];
+	unsigned short	status;
+	unsigned short	magic;		/* 0xffff = regular FPU data only */
+
+	/* FXSR FPU environment */
+	__u32	_fxsr_env[6];
+	__u32	mxcsr;
+	__u32	reserved;
+	struct _fpxreg	_fxsr_st[8];
+	struct _xmmreg	_xmm[8];	/* It's actually 16 */
+	__u32	padding[44];
+	union {
+		__u32 padding2[12];
+		struct _fpx_sw_bytes sw_reserved;
+	};
+};
+
+struct sigcontext_ia32 {
+       unsigned short gs, __gsh;
+       unsigned short fs, __fsh;
+       unsigned short es, __esh;
+       unsigned short ds, __dsh;
+       unsigned int di;
+       unsigned int si;
+       unsigned int bp;
+       unsigned int sp;
+       unsigned int bx;
+       unsigned int dx;
+       unsigned int cx;
+       unsigned int ax;
+       unsigned int trapno;
+       unsigned int err;
+       unsigned int ip;
+       unsigned short cs, __csh;
+       unsigned int flags;
+       unsigned int sp_at_signal;
+       unsigned short ss, __ssh;
+       unsigned int fpstate;		/* really (struct _fpstate_ia32 *) */
+       unsigned int oldmask;
+       unsigned int cr2;
+};
+
+#endif /* _ASM_X86_SIGCONTEXT32_H */
diff --git a/arch/x86/include/asm/siginfo.h b/arch/x86/include/asm/siginfo.h
new file mode 100644
index 0000000..fc1aa55
--- /dev/null
+++ b/arch/x86/include/asm/siginfo.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_SIGINFO_H
+#define _ASM_X86_SIGINFO_H
+
+#ifdef __x86_64__
+# define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+#endif
+
+#include <asm-generic/siginfo.h>
+
+#endif /* _ASM_X86_SIGINFO_H */
diff --git a/arch/x86/include/asm/signal.h b/arch/x86/include/asm/signal.h
new file mode 100644
index 0000000..96ac44f
--- /dev/null
+++ b/arch/x86/include/asm/signal.h
@@ -0,0 +1,262 @@
+#ifndef _ASM_X86_SIGNAL_H
+#define _ASM_X86_SIGNAL_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/compiler.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+#include <linux/linkage.h>
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+
+#ifdef __i386__
+# define _NSIG_BPW	32
+#else
+# define _NSIG_BPW	64
+#endif
+
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001u
+#define SA_NOCLDWAIT	0x00000002u
+#define SA_SIGINFO	0x00000004u
+#define SA_ONSTACK	0x08000000u
+#define SA_RESTART	0x10000000u
+#define SA_NODEFER	0x40000000u
+#define SA_RESETHAND	0x80000000u
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef __i386__
+# ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+extern void do_notify_resume(struct pt_regs *, void *, __u32);
+
+# else /* __KERNEL__ */
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+# endif /* ! __KERNEL__ */
+#else /* __i386__ */
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#endif /* !__i386__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#ifdef __i386__
+
+#define __HAVE_ARCH_SIG_BITOPS
+
+#define sigaddset(set,sig)		    \
+	(__builtin_constant_p(sig)	    \
+	 ? __const_sigaddset((set), (sig))  \
+	 : __gen_sigaddset((set), (sig)))
+
+static inline void __gen_sigaddset(sigset_t *set, int _sig)
+{
+	asm("btsl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
+}
+
+static inline void __const_sigaddset(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	set->sig[sig / _NSIG_BPW] |= 1 << (sig % _NSIG_BPW);
+}
+
+#define sigdelset(set, sig)		    \
+	(__builtin_constant_p(sig)	    \
+	 ? __const_sigdelset((set), (sig))  \
+	 : __gen_sigdelset((set), (sig)))
+
+
+static inline void __gen_sigdelset(sigset_t *set, int _sig)
+{
+	asm("btrl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
+}
+
+static inline void __const_sigdelset(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	set->sig[sig / _NSIG_BPW] &= ~(1 << (sig % _NSIG_BPW));
+}
+
+static inline int __const_sigismember(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+}
+
+static inline int __gen_sigismember(sigset_t *set, int _sig)
+{
+	int ret;
+	asm("btl %2,%1\n\tsbbl %0,%0"
+	    : "=r"(ret) : "m"(*set), "Ir"(_sig-1) : "cc");
+	return ret;
+}
+
+#define sigismember(set, sig)			\
+	(__builtin_constant_p(sig)		\
+	 ? __const_sigismember((set), (sig))	\
+	 : __gen_sigismember((set), (sig)))
+
+static inline int sigfindinword(unsigned long word)
+{
+	asm("bsfl %1,%0" : "=r"(word) : "rm"(word) : "cc");
+	return word;
+}
+
+struct pt_regs;
+
+#else /* __i386__ */
+
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#endif /* !__i386__ */
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_SIGNAL_H */
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
new file mode 100644
index 0000000..2766021
--- /dev/null
+++ b/arch/x86/include/asm/smp.h
@@ -0,0 +1,229 @@
+#ifndef _ASM_X86_SMP_H
+#define _ASM_X86_SMP_H
+#ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <asm/percpu.h>
+
+/*
+ * We need the APIC definitions automatically as part of 'smp.h'
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+# include <asm/mpspec.h>
+# include <asm/apic.h>
+# ifdef CONFIG_X86_IO_APIC
+#  include <asm/io_apic.h>
+# endif
+#endif
+#include <asm/pda.h>
+#include <asm/thread_info.h>
+
+extern cpumask_t cpu_callout_map;
+extern cpumask_t cpu_initialized;
+extern cpumask_t cpu_callin_map;
+
+extern void (*mtrr_hook)(void);
+extern void zap_low_mappings(void);
+
+extern int __cpuinit get_local_pda(int cpu);
+
+extern int smp_num_siblings;
+extern unsigned int num_processors;
+extern cpumask_t cpu_initialized;
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU(cpumask_t, cpu_core_map);
+DECLARE_PER_CPU(u16, cpu_llc_id);
+#ifdef CONFIG_X86_32
+DECLARE_PER_CPU(int, cpu_number);
+#endif
+
+DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid);
+DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
+
+/* Static state in head.S used to set up a CPU */
+extern struct {
+	void *sp;
+	unsigned short ss;
+} stack_start;
+
+struct smp_ops {
+	void (*smp_prepare_boot_cpu)(void);
+	void (*smp_prepare_cpus)(unsigned max_cpus);
+	void (*smp_cpus_done)(unsigned max_cpus);
+
+	void (*smp_send_stop)(void);
+	void (*smp_send_reschedule)(int cpu);
+
+	int (*cpu_up)(unsigned cpu);
+	int (*cpu_disable)(void);
+	void (*cpu_die)(unsigned int cpu);
+	void (*play_dead)(void);
+
+	void (*send_call_func_ipi)(cpumask_t mask);
+	void (*send_call_func_single_ipi)(int cpu);
+};
+
+/* Globals due to paravirt */
+extern void set_cpu_sibling_map(int cpu);
+
+#ifdef CONFIG_SMP
+#ifndef CONFIG_PARAVIRT
+#define startup_ipi_hook(phys_apicid, start_eip, start_esp) do { } while (0)
+#endif
+extern struct smp_ops smp_ops;
+
+static inline void smp_send_stop(void)
+{
+	smp_ops.smp_send_stop();
+}
+
+static inline void smp_prepare_boot_cpu(void)
+{
+	smp_ops.smp_prepare_boot_cpu();
+}
+
+static inline void smp_prepare_cpus(unsigned int max_cpus)
+{
+	smp_ops.smp_prepare_cpus(max_cpus);
+}
+
+static inline void smp_cpus_done(unsigned int max_cpus)
+{
+	smp_ops.smp_cpus_done(max_cpus);
+}
+
+static inline int __cpu_up(unsigned int cpu)
+{
+	return smp_ops.cpu_up(cpu);
+}
+
+static inline int __cpu_disable(void)
+{
+	return smp_ops.cpu_disable();
+}
+
+static inline void __cpu_die(unsigned int cpu)
+{
+	smp_ops.cpu_die(cpu);
+}
+
+static inline void play_dead(void)
+{
+	smp_ops.play_dead();
+}
+
+static inline void smp_send_reschedule(int cpu)
+{
+	smp_ops.smp_send_reschedule(cpu);
+}
+
+static inline void arch_send_call_function_single_ipi(int cpu)
+{
+	smp_ops.send_call_func_single_ipi(cpu);
+}
+
+static inline void arch_send_call_function_ipi(cpumask_t mask)
+{
+	smp_ops.send_call_func_ipi(mask);
+}
+
+void cpu_disable_common(void);
+void native_smp_prepare_boot_cpu(void);
+void native_smp_prepare_cpus(unsigned int max_cpus);
+void native_smp_cpus_done(unsigned int max_cpus);
+int native_cpu_up(unsigned int cpunum);
+int native_cpu_disable(void);
+void native_cpu_die(unsigned int cpu);
+void native_play_dead(void);
+void play_dead_common(void);
+
+void native_send_call_func_ipi(cpumask_t mask);
+void native_send_call_func_single_ipi(int cpu);
+
+extern void prefill_possible_map(void);
+
+void smp_store_cpu_info(int id);
+#define cpu_physical_id(cpu)	per_cpu(x86_cpu_to_apicid, cpu)
+
+/* We don't mark CPUs online until __cpu_up(), so we need another measure */
+static inline int num_booting_cpus(void)
+{
+	return cpus_weight(cpu_callout_map);
+}
+#else
+static inline void prefill_possible_map(void)
+{
+}
+#endif /* CONFIG_SMP */
+
+extern unsigned disabled_cpus __cpuinitdata;
+
+#ifdef CONFIG_X86_32_SMP
+/*
+ * This function is needed by all SMP systems. It must _always_ be valid
+ * from the initial startup. We map APIC_BASE very early in page_setup(),
+ * so this is correct in the x86 case.
+ */
+#define raw_smp_processor_id() (x86_read_percpu(cpu_number))
+extern int safe_smp_processor_id(void);
+
+#elif defined(CONFIG_X86_64_SMP)
+#define raw_smp_processor_id()	read_pda(cpunumber)
+
+#define stack_smp_processor_id()					\
+({								\
+	struct thread_info *ti;						\
+	__asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (CURRENT_MASK));	\
+	ti->cpu;							\
+})
+#define safe_smp_processor_id()		smp_processor_id()
+
+#else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */
+#define cpu_physical_id(cpu)		boot_cpu_physical_apicid
+#define safe_smp_processor_id()		0
+#define stack_smp_processor_id() 	0
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+#ifndef CONFIG_X86_64
+static inline int logical_smp_processor_id(void)
+{
+	/* we don't want to mark this access volatile - bad code generation */
+	return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
+}
+
+#include <mach_apicdef.h>
+static inline unsigned int read_apic_id(void)
+{
+	unsigned int reg;
+
+	reg = *(u32 *)(APIC_BASE + APIC_ID);
+
+	return GET_APIC_ID(reg);
+}
+#endif
+
+
+# if defined(APIC_DEFINITION) || defined(CONFIG_X86_64)
+extern int hard_smp_processor_id(void);
+# else
+#include <mach_apicdef.h>
+static inline int hard_smp_processor_id(void)
+{
+	/* we don't want to mark this access volatile - bad code generation */
+	return read_apic_id();
+}
+# endif /* APIC_DEFINITION */
+
+#else /* CONFIG_X86_LOCAL_APIC */
+
+# ifndef CONFIG_SMP
+#  define hard_smp_processor_id()	0
+# endif
+
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_X86_SMP_H */
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
new file mode 100644
index 0000000..8ab9cc8
--- /dev/null
+++ b/arch/x86/include/asm/socket.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_X86_SOCKET_H
+#define _ASM_X86_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* _ASM_X86_SOCKET_H */
diff --git a/arch/x86/include/asm/sockios.h b/arch/x86/include/asm/sockios.h
new file mode 100644
index 0000000..49cc72b
--- /dev/null
+++ b/arch/x86/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_X86_SOCKIOS_H
+#define _ASM_X86_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* _ASM_X86_SOCKIOS_H */
diff --git a/arch/x86/include/asm/sparsemem.h b/arch/x86/include/asm/sparsemem.h
new file mode 100644
index 0000000..be44f7d
--- /dev/null
+++ b/arch/x86/include/asm/sparsemem.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_X86_SPARSEMEM_H
+#define _ASM_X86_SPARSEMEM_H
+
+#ifdef CONFIG_SPARSEMEM
+/*
+ * generic non-linear memory support:
+ *
+ * 1) we will not split memory into more chunks than will fit into the flags
+ *    field of the struct page
+ *
+ * SECTION_SIZE_BITS		2^n: size of each section
+ * MAX_PHYSADDR_BITS		2^n: max size of physical address space
+ * MAX_PHYSMEM_BITS		2^n: how much memory we can have in that space
+ *
+ */
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_PAE
+#  define SECTION_SIZE_BITS	29
+#  define MAX_PHYSADDR_BITS	36
+#  define MAX_PHYSMEM_BITS	36
+# else
+#  define SECTION_SIZE_BITS	26
+#  define MAX_PHYSADDR_BITS	32
+#  define MAX_PHYSMEM_BITS	32
+# endif
+#else /* CONFIG_X86_32 */
+# define SECTION_SIZE_BITS	27 /* matt - 128 is convenient right now */
+# define MAX_PHYSADDR_BITS	44
+# define MAX_PHYSMEM_BITS	44
+#endif
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _ASM_X86_SPARSEMEM_H */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
new file mode 100644
index 0000000..d17c919
--- /dev/null
+++ b/arch/x86/include/asm/spinlock.h
@@ -0,0 +1,364 @@
+#ifndef _ASM_X86_SPINLOCK_H
+#define _ASM_X86_SPINLOCK_H
+
+#include <asm/atomic.h>
+#include <asm/rwlock.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <linux/compiler.h>
+#include <asm/paravirt.h>
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ *
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * These are fair FIFO ticket locks, which are currently limited to 256
+ * CPUs.
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+
+#ifdef CONFIG_X86_32
+# define LOCK_PTR_REG "a"
+# define REG_PTR_MODE "k"
+#else
+# define LOCK_PTR_REG "D"
+# define REG_PTR_MODE "q"
+#endif
+
+#if defined(CONFIG_X86_32) && \
+	(defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE))
+/*
+ * On PPro SMP or if we are using OOSTORE, we use a locked operation to unlock
+ * (PPro errata 66, 92)
+ */
+# define UNLOCK_LOCK_PREFIX LOCK_PREFIX
+#else
+# define UNLOCK_LOCK_PREFIX
+#endif
+
+/*
+ * Ticket locks are conceptually two parts, one indicating the current head of
+ * the queue, and the other indicating the current tail. The lock is acquired
+ * by atomically noting the tail and incrementing it by one (thus adding
+ * ourself to the queue and noting our position), then waiting until the head
+ * becomes equal to the the initial value of the tail.
+ *
+ * We use an xadd covering *both* parts of the lock, to increment the tail and
+ * also load the position of the head, which takes care of memory ordering
+ * issues and should be optimal for the uncontended case. Note the tail must be
+ * in the high part, because a wide xadd increment of the low part would carry
+ * up and contaminate the high part.
+ *
+ * With fewer than 2^8 possible CPUs, we can use x86's partial registers to
+ * save some instructions and make the code more elegant. There really isn't
+ * much between them in performance though, especially as locks are out of line.
+ */
+#if (NR_CPUS < 256)
+#define TICKET_SHIFT 8
+
+static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
+{
+	short inc = 0x0100;
+
+	asm volatile (
+		LOCK_PREFIX "xaddw %w0, %1\n"
+		"1:\t"
+		"cmpb %h0, %b0\n\t"
+		"je 2f\n\t"
+		"rep ; nop\n\t"
+		"movb %1, %b0\n\t"
+		/* don't need lfence here, because loads are in-order */
+		"jmp 1b\n"
+		"2:"
+		: "+Q" (inc), "+m" (lock->slock)
+		:
+		: "memory", "cc");
+}
+
+static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
+{
+	int tmp, new;
+
+	asm volatile("movzwl %2, %0\n\t"
+		     "cmpb %h0,%b0\n\t"
+		     "leal 0x100(%" REG_PTR_MODE "0), %1\n\t"
+		     "jne 1f\n\t"
+		     LOCK_PREFIX "cmpxchgw %w1,%2\n\t"
+		     "1:"
+		     "sete %b1\n\t"
+		     "movzbl %b1,%0\n\t"
+		     : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
+		     :
+		     : "memory", "cc");
+
+	return tmp;
+}
+
+static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
+{
+	asm volatile(UNLOCK_LOCK_PREFIX "incb %0"
+		     : "+m" (lock->slock)
+		     :
+		     : "memory", "cc");
+}
+#else
+#define TICKET_SHIFT 16
+
+static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
+{
+	int inc = 0x00010000;
+	int tmp;
+
+	asm volatile(LOCK_PREFIX "xaddl %0, %1\n"
+		     "movzwl %w0, %2\n\t"
+		     "shrl $16, %0\n\t"
+		     "1:\t"
+		     "cmpl %0, %2\n\t"
+		     "je 2f\n\t"
+		     "rep ; nop\n\t"
+		     "movzwl %1, %2\n\t"
+		     /* don't need lfence here, because loads are in-order */
+		     "jmp 1b\n"
+		     "2:"
+		     : "+r" (inc), "+m" (lock->slock), "=&r" (tmp)
+		     :
+		     : "memory", "cc");
+}
+
+static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
+{
+	int tmp;
+	int new;
+
+	asm volatile("movl %2,%0\n\t"
+		     "movl %0,%1\n\t"
+		     "roll $16, %0\n\t"
+		     "cmpl %0,%1\n\t"
+		     "leal 0x00010000(%" REG_PTR_MODE "0), %1\n\t"
+		     "jne 1f\n\t"
+		     LOCK_PREFIX "cmpxchgl %1,%2\n\t"
+		     "1:"
+		     "sete %b1\n\t"
+		     "movzbl %b1,%0\n\t"
+		     : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
+		     :
+		     : "memory", "cc");
+
+	return tmp;
+}
+
+static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
+{
+	asm volatile(UNLOCK_LOCK_PREFIX "incw %0"
+		     : "+m" (lock->slock)
+		     :
+		     : "memory", "cc");
+}
+#endif
+
+static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
+{
+	int tmp = ACCESS_ONCE(lock->slock);
+
+	return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1 << TICKET_SHIFT) - 1));
+}
+
+static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
+{
+	int tmp = ACCESS_ONCE(lock->slock);
+
+	return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
+}
+
+#ifdef CONFIG_PARAVIRT
+/*
+ * Define virtualization-friendly old-style lock byte lock, for use in
+ * pv_lock_ops if desired.
+ *
+ * This differs from the pre-2.6.24 spinlock by always using xchgb
+ * rather than decb to take the lock; this allows it to use a
+ * zero-initialized lock structure.  It also maintains a 1-byte
+ * contention counter, so that we can implement
+ * __byte_spin_is_contended.
+ */
+struct __byte_spinlock {
+	s8 lock;
+	s8 spinners;
+};
+
+static inline int __byte_spin_is_locked(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	return bl->lock != 0;
+}
+
+static inline int __byte_spin_is_contended(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	return bl->spinners != 0;
+}
+
+static inline void __byte_spin_lock(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	s8 val = 1;
+
+	asm("1: xchgb %1, %0\n"
+	    "   test %1,%1\n"
+	    "   jz 3f\n"
+	    "   " LOCK_PREFIX "incb %2\n"
+	    "2: rep;nop\n"
+	    "   cmpb $1, %0\n"
+	    "   je 2b\n"
+	    "   " LOCK_PREFIX "decb %2\n"
+	    "   jmp 1b\n"
+	    "3:"
+	    : "+m" (bl->lock), "+q" (val), "+m" (bl->spinners): : "memory");
+}
+
+static inline int __byte_spin_trylock(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	u8 old = 1;
+
+	asm("xchgb %1,%0"
+	    : "+m" (bl->lock), "+q" (old) : : "memory");
+
+	return old == 0;
+}
+
+static inline void __byte_spin_unlock(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	smp_wmb();
+	bl->lock = 0;
+}
+#else  /* !CONFIG_PARAVIRT */
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_locked(lock);
+}
+
+static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_contended(lock);
+}
+
+static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	__ticket_spin_lock(lock);
+}
+
+static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	return __ticket_spin_trylock(lock);
+}
+
+static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__ticket_spin_unlock(lock);
+}
+
+static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
+						  unsigned long flags)
+{
+	__raw_spin_lock(lock);
+}
+
+#endif	/* CONFIG_PARAVIRT */
+
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
+{
+	while (__raw_spin_is_locked(lock))
+		cpu_relax();
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * On x86, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static inline int __raw_read_can_lock(raw_rwlock_t *lock)
+{
+	return (int)(lock)->lock > 0;
+}
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static inline int __raw_write_can_lock(raw_rwlock_t *lock)
+{
+	return (lock)->lock == RW_LOCK_BIAS;
+}
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t"
+		     "jns 1f\n"
+		     "call __read_lock_failed\n\t"
+		     "1:\n"
+		     ::LOCK_PTR_REG (rw) : "memory");
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	asm volatile(LOCK_PREFIX " subl %1,(%0)\n\t"
+		     "jz 1f\n"
+		     "call __write_lock_failed\n\t"
+		     "1:\n"
+		     ::LOCK_PTR_REG (rw), "i" (RW_LOCK_BIAS) : "memory");
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+
+	atomic_dec(count);
+	if (atomic_read(count) >= 0)
+		return 1;
+	atomic_inc(count);
+	return 0;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+
+	if (atomic_sub_and_test(RW_LOCK_BIAS, count))
+		return 1;
+	atomic_add(RW_LOCK_BIAS, count);
+	return 0;
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	asm volatile(LOCK_PREFIX "incl %0" :"+m" (rw->lock) : : "memory");
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	asm volatile(LOCK_PREFIX "addl %1, %0"
+		     : "+m" (rw->lock) : "i" (RW_LOCK_BIAS) : "memory");
+}
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* _ASM_X86_SPINLOCK_H */
diff --git a/arch/x86/include/asm/spinlock_types.h b/arch/x86/include/asm/spinlock_types.h
new file mode 100644
index 0000000..845f81c
--- /dev/null
+++ b/arch/x86/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_SPINLOCK_TYPES_H
+#define _ASM_X86_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct raw_spinlock {
+	unsigned int slock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ RW_LOCK_BIAS }
+
+#endif /* _ASM_X86_SPINLOCK_TYPES_H */
diff --git a/arch/x86/include/asm/srat.h b/arch/x86/include/asm/srat.h
new file mode 100644
index 0000000..b508d63
--- /dev/null
+++ b/arch/x86/include/asm/srat.h
@@ -0,0 +1,39 @@
+/*
+ * Some of the code in this file has been gleaned from the 64 bit
+ * discontigmem support code base.
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to Pat Gaughen <gone@us.ibm.com>
+ */
+
+#ifndef _ASM_X86_SRAT_H
+#define _ASM_X86_SRAT_H
+
+#ifdef CONFIG_ACPI_NUMA
+extern int get_memcfg_from_srat(void);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+	return 0;
+}
+#endif
+
+#endif /* _ASM_X86_SRAT_H */
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
new file mode 100644
index 0000000..f517944
--- /dev/null
+++ b/arch/x86/include/asm/stacktrace.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_STACKTRACE_H
+#define _ASM_X86_STACKTRACE_H
+
+extern int kstack_depth_to_print;
+
+/* Generic stack tracer with callbacks */
+
+struct stacktrace_ops {
+	void (*warning)(void *data, char *msg);
+	/* msg must contain %s for the symbol */
+	void (*warning_symbol)(void *data, char *msg, unsigned long symbol);
+	void (*address)(void *data, unsigned long address, int reliable);
+	/* On negative return stop dumping */
+	int (*stack)(void *data, char *name);
+};
+
+void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp,
+		const struct stacktrace_ops *ops, void *data);
+
+#endif /* _ASM_X86_STACKTRACE_H */
diff --git a/arch/x86/include/asm/stat.h b/arch/x86/include/asm/stat.h
new file mode 100644
index 0000000..e0b1d9b
--- /dev/null
+++ b/arch/x86/include/asm/stat.h
@@ -0,0 +1,114 @@
+#ifndef _ASM_X86_STAT_H
+#define _ASM_X86_STAT_H
+
+#define STAT_HAVE_NSEC 1
+
+#ifdef __i386__
+struct stat {
+	unsigned long  st_dev;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned long  st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	/* Number 512-byte blocks allocated. */
+	unsigned long long	st_blocks;
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#else /* __i386__ */
+
+struct stat {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_nlink;
+
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	__pad0;
+	unsigned long	st_rdev;
+	long		st_size;
+	long		st_blksize;
+	long		st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long   st_ctime_nsec;
+	long		__unused[3];
+};
+#endif
+
+/* for 32bit emulation and 32 bit kernels */
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+#ifdef __i386__
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+#else
+	unsigned int  st_size;
+	unsigned int  st_atime;
+	unsigned int  st_mtime;
+	unsigned int  st_ctime;
+#endif
+};
+
+#endif /* _ASM_X86_STAT_H */
diff --git a/arch/x86/include/asm/statfs.h b/arch/x86/include/asm/statfs.h
new file mode 100644
index 0000000..2d0adbf
--- /dev/null
+++ b/arch/x86/include/asm/statfs.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_STATFS_H
+#define _ASM_X86_STATFS_H
+
+/*
+ * We need compat_statfs64 to be packed, because the i386 ABI won't
+ * add padding at the end to bring it to a multiple of 8 bytes, but
+ * the x86_64 ABI will.
+ */
+#define ARCH_PACK_COMPAT_STATFS64 __attribute__((packed,aligned(4)))
+
+#include <asm-generic/statfs.h>
+#endif /* _ASM_X86_STATFS_H */
diff --git a/arch/x86/include/asm/string.h b/arch/x86/include/asm/string.h
new file mode 100644
index 0000000..6dfd6d9
--- /dev/null
+++ b/arch/x86/include/asm/string.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "string_32.h"
+#else
+# include "string_64.h"
+#endif
diff --git a/arch/x86/include/asm/string_32.h b/arch/x86/include/asm/string_32.h
new file mode 100644
index 0000000..0e0e3ba
--- /dev/null
+++ b/arch/x86/include/asm/string_32.h
@@ -0,0 +1,326 @@
+#ifndef _ASM_X86_STRING_32_H
+#define _ASM_X86_STRING_32_H
+
+#ifdef __KERNEL__
+
+/* Let gcc decide whether to inline or use the out of line functions */
+
+#define __HAVE_ARCH_STRCPY
+extern char *strcpy(char *dest, const char *src);
+
+#define __HAVE_ARCH_STRNCPY
+extern char *strncpy(char *dest, const char *src, size_t count);
+
+#define __HAVE_ARCH_STRCAT
+extern char *strcat(char *dest, const char *src);
+
+#define __HAVE_ARCH_STRNCAT
+extern char *strncat(char *dest, const char *src, size_t count);
+
+#define __HAVE_ARCH_STRCMP
+extern int strcmp(const char *cs, const char *ct);
+
+#define __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *cs, const char *ct, size_t count);
+
+#define __HAVE_ARCH_STRCHR
+extern char *strchr(const char *s, int c);
+
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *s);
+
+static __always_inline void *__memcpy(void *to, const void *from, size_t n)
+{
+	int d0, d1, d2;
+	asm volatile("rep ; movsl\n\t"
+		     "movl %4,%%ecx\n\t"
+		     "andl $3,%%ecx\n\t"
+		     "jz 1f\n\t"
+		     "rep ; movsb\n\t"
+		     "1:"
+		     : "=&c" (d0), "=&D" (d1), "=&S" (d2)
+		     : "0" (n / 4), "g" (n), "1" ((long)to), "2" ((long)from)
+		     : "memory");
+	return to;
+}
+
+/*
+ * This looks ugly, but the compiler can optimize it totally,
+ * as the count is constant.
+ */
+static __always_inline void *__constant_memcpy(void *to, const void *from,
+					       size_t n)
+{
+	long esi, edi;
+	if (!n)
+		return to;
+
+	switch (n) {
+	case 1:
+		*(char *)to = *(char *)from;
+		return to;
+	case 2:
+		*(short *)to = *(short *)from;
+		return to;
+	case 4:
+		*(int *)to = *(int *)from;
+		return to;
+
+	case 3:
+		*(short *)to = *(short *)from;
+		*((char *)to + 2) = *((char *)from + 2);
+		return to;
+	case 5:
+		*(int *)to = *(int *)from;
+		*((char *)to + 4) = *((char *)from + 4);
+		return to;
+	case 6:
+		*(int *)to = *(int *)from;
+		*((short *)to + 2) = *((short *)from + 2);
+		return to;
+	case 8:
+		*(int *)to = *(int *)from;
+		*((int *)to + 1) = *((int *)from + 1);
+		return to;
+	}
+
+	esi = (long)from;
+	edi = (long)to;
+	if (n >= 5 * 4) {
+		/* large block: use rep prefix */
+		int ecx;
+		asm volatile("rep ; movsl"
+			     : "=&c" (ecx), "=&D" (edi), "=&S" (esi)
+			     : "0" (n / 4), "1" (edi), "2" (esi)
+			     : "memory"
+		);
+	} else {
+		/* small block: don't clobber ecx + smaller code */
+		if (n >= 4 * 4)
+			asm volatile("movsl"
+				     : "=&D"(edi), "=&S"(esi)
+				     : "0"(edi), "1"(esi)
+				     : "memory");
+		if (n >= 3 * 4)
+			asm volatile("movsl"
+				     : "=&D"(edi), "=&S"(esi)
+				     : "0"(edi), "1"(esi)
+				     : "memory");
+		if (n >= 2 * 4)
+			asm volatile("movsl"
+				     : "=&D"(edi), "=&S"(esi)
+				     : "0"(edi), "1"(esi)
+				     : "memory");
+		if (n >= 1 * 4)
+			asm volatile("movsl"
+				     : "=&D"(edi), "=&S"(esi)
+				     : "0"(edi), "1"(esi)
+				     : "memory");
+	}
+	switch (n % 4) {
+		/* tail */
+	case 0:
+		return to;
+	case 1:
+		asm volatile("movsb"
+			     : "=&D"(edi), "=&S"(esi)
+			     : "0"(edi), "1"(esi)
+			     : "memory");
+		return to;
+	case 2:
+		asm volatile("movsw"
+			     : "=&D"(edi), "=&S"(esi)
+			     : "0"(edi), "1"(esi)
+			     : "memory");
+		return to;
+	default:
+		asm volatile("movsw\n\tmovsb"
+			     : "=&D"(edi), "=&S"(esi)
+			     : "0"(edi), "1"(esi)
+			     : "memory");
+		return to;
+	}
+}
+
+#define __HAVE_ARCH_MEMCPY
+
+#ifdef CONFIG_X86_USE_3DNOW
+
+#include <asm/mmx.h>
+
+/*
+ *	This CPU favours 3DNow strongly (eg AMD Athlon)
+ */
+
+static inline void *__constant_memcpy3d(void *to, const void *from, size_t len)
+{
+	if (len < 512)
+		return __constant_memcpy(to, from, len);
+	return _mmx_memcpy(to, from, len);
+}
+
+static inline void *__memcpy3d(void *to, const void *from, size_t len)
+{
+	if (len < 512)
+		return __memcpy(to, from, len);
+	return _mmx_memcpy(to, from, len);
+}
+
+#define memcpy(t, f, n)				\
+	(__builtin_constant_p((n))		\
+	 ? __constant_memcpy3d((t), (f), (n))	\
+	 : __memcpy3d((t), (f), (n)))
+
+#else
+
+/*
+ *	No 3D Now!
+ */
+
+#define memcpy(t, f, n)				\
+	(__builtin_constant_p((n))		\
+	 ? __constant_memcpy((t), (f), (n))	\
+	 : __memcpy((t), (f), (n)))
+
+#endif
+
+#define __HAVE_ARCH_MEMMOVE
+void *memmove(void *dest, const void *src, size_t n);
+
+#define memcmp __builtin_memcmp
+
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *cs, int c, size_t count);
+
+static inline void *__memset_generic(void *s, char c, size_t count)
+{
+	int d0, d1;
+	asm volatile("rep\n\t"
+		     "stosb"
+		     : "=&c" (d0), "=&D" (d1)
+		     : "a" (c), "1" (s), "0" (count)
+		     : "memory");
+	return s;
+}
+
+/* we might want to write optimized versions of these later */
+#define __constant_count_memset(s, c, count) __memset_generic((s), (c), (count))
+
+/*
+ * memset(x, 0, y) is a reasonably common thing to do, so we want to fill
+ * things 32 bits at a time even when we don't know the size of the
+ * area at compile-time..
+ */
+static __always_inline
+void *__constant_c_memset(void *s, unsigned long c, size_t count)
+{
+	int d0, d1;
+	asm volatile("rep ; stosl\n\t"
+		     "testb $2,%b3\n\t"
+		     "je 1f\n\t"
+		     "stosw\n"
+		     "1:\ttestb $1,%b3\n\t"
+		     "je 2f\n\t"
+		     "stosb\n"
+		     "2:"
+		     : "=&c" (d0), "=&D" (d1)
+		     : "a" (c), "q" (count), "0" (count/4), "1" ((long)s)
+		     : "memory");
+	return s;
+}
+
+/* Added by Gertjan van Wingerde to make minix and sysv module work */
+#define __HAVE_ARCH_STRNLEN
+extern size_t strnlen(const char *s, size_t count);
+/* end of additional stuff */
+
+#define __HAVE_ARCH_STRSTR
+extern char *strstr(const char *cs, const char *ct);
+
+/*
+ * This looks horribly ugly, but the compiler can optimize it totally,
+ * as we by now know that both pattern and count is constant..
+ */
+static __always_inline
+void *__constant_c_and_count_memset(void *s, unsigned long pattern,
+				    size_t count)
+{
+	switch (count) {
+	case 0:
+		return s;
+	case 1:
+		*(unsigned char *)s = pattern & 0xff;
+		return s;
+	case 2:
+		*(unsigned short *)s = pattern & 0xffff;
+		return s;
+	case 3:
+		*(unsigned short *)s = pattern & 0xffff;
+		*((unsigned char *)s + 2) = pattern & 0xff;
+		return s;
+	case 4:
+		*(unsigned long *)s = pattern;
+		return s;
+	}
+
+#define COMMON(x)							\
+	asm volatile("rep ; stosl"					\
+		     x							\
+		     : "=&c" (d0), "=&D" (d1)				\
+		     : "a" (eax), "0" (count/4), "1" ((long)s)	\
+		     : "memory")
+
+	{
+		int d0, d1;
+#if __GNUC__ == 4 && __GNUC_MINOR__ == 0
+		/* Workaround for broken gcc 4.0 */
+		register unsigned long eax asm("%eax") = pattern;
+#else
+		unsigned long eax = pattern;
+#endif
+
+		switch (count % 4) {
+		case 0:
+			COMMON("");
+			return s;
+		case 1:
+			COMMON("\n\tstosb");
+			return s;
+		case 2:
+			COMMON("\n\tstosw");
+			return s;
+		default:
+			COMMON("\n\tstosw\n\tstosb");
+			return s;
+		}
+	}
+
+#undef COMMON
+}
+
+#define __constant_c_x_memset(s, c, count)			\
+	(__builtin_constant_p(count)				\
+	 ? __constant_c_and_count_memset((s), (c), (count))	\
+	 : __constant_c_memset((s), (c), (count)))
+
+#define __memset(s, c, count)				\
+	(__builtin_constant_p(count)			\
+	 ? __constant_count_memset((s), (c), (count))	\
+	 : __memset_generic((s), (c), (count)))
+
+#define __HAVE_ARCH_MEMSET
+#define memset(s, c, count)						\
+	(__builtin_constant_p(c)					\
+	 ? __constant_c_x_memset((s), (0x01010101UL * (unsigned char)(c)), \
+				 (count))				\
+	 : __memset((s), (c), (count)))
+
+/*
+ * find the first occurrence of byte 'c', or 1 past the area if none
+ */
+#define __HAVE_ARCH_MEMSCAN
+extern void *memscan(void *addr, int c, size_t size);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_STRING_32_H */
diff --git a/arch/x86/include/asm/string_64.h b/arch/x86/include/asm/string_64.h
new file mode 100644
index 0000000..2afe164
--- /dev/null
+++ b/arch/x86/include/asm/string_64.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_X86_STRING_64_H
+#define _ASM_X86_STRING_64_H
+
+#ifdef __KERNEL__
+
+/* Written 2002 by Andi Kleen */
+
+/* Only used for special circumstances. Stolen from i386/string.h */
+static __always_inline void *__inline_memcpy(void *to, const void *from, size_t n)
+{
+	unsigned long d0, d1, d2;
+	asm volatile("rep ; movsl\n\t"
+		     "testb $2,%b4\n\t"
+		     "je 1f\n\t"
+		     "movsw\n"
+		     "1:\ttestb $1,%b4\n\t"
+		     "je 2f\n\t"
+		     "movsb\n"
+		     "2:"
+		     : "=&c" (d0), "=&D" (d1), "=&S" (d2)
+		     : "0" (n / 4), "q" (n), "1" ((long)to), "2" ((long)from)
+		     : "memory");
+	return to;
+}
+
+/* Even with __builtin_ the compiler may decide to use the out of line
+   function. */
+
+#define __HAVE_ARCH_MEMCPY 1
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
+extern void *memcpy(void *to, const void *from, size_t len);
+#else
+extern void *__memcpy(void *to, const void *from, size_t len);
+#define memcpy(dst, src, len)					\
+({								\
+	size_t __len = (len);					\
+	void *__ret;						\
+	if (__builtin_constant_p(len) && __len >= 64)		\
+		__ret = __memcpy((dst), (src), __len);		\
+	else							\
+		__ret = __builtin_memcpy((dst), (src), __len);	\
+	__ret;							\
+})
+#endif
+
+#define __HAVE_ARCH_MEMSET
+void *memset(void *s, int c, size_t n);
+
+#define __HAVE_ARCH_MEMMOVE
+void *memmove(void *dest, const void *src, size_t count);
+
+int memcmp(const void *cs, const void *ct, size_t count);
+size_t strlen(const char *s);
+char *strcpy(char *dest, const char *src);
+char *strcat(char *dest, const char *src);
+int strcmp(const char *cs, const char *ct);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_STRING_64_H */
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
new file mode 100644
index 0000000..9b3070f
--- /dev/null
+++ b/arch/x86/include/asm/summit/apic.h
@@ -0,0 +1,184 @@
+#ifndef __ASM_SUMMIT_APIC_H
+#define __ASM_SUMMIT_APIC_H
+
+#include <asm/smp.h>
+
+#define esr_disable (1)
+#define NO_BALANCE_IRQ (0)
+
+/* In clustered mode, the high nibble of APIC ID is a cluster number.
+ * The low nibble is a 4-bit bitmap. */
+#define XAPIC_DEST_CPUS_SHIFT	4
+#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+
+#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline cpumask_t target_cpus(void)
+{
+	/* CPU_MASK_ALL (0xff) has undefined behaviour with
+	 * dest_LowestPrio mode logical clustered apic interrupt routing
+	 * Just start on cpu 0.  IRQ balancing will spread load
+	 */
+	return cpumask_of_cpu(0);
+}
+
+#define INT_DELIVERY_MODE (dest_LowestPrio)
+#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+
+/* we don't use the phys_cpu_present_map to indicate apicid presence */
+static inline unsigned long check_apicid_present(int bit)
+{
+	return 1;
+}
+
+#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
+
+extern u8 cpu_2_logical_apicid[];
+
+static inline void init_apic_ldr(void)
+{
+	unsigned long val, id;
+	int count = 0;
+	u8 my_id = (u8)hard_smp_processor_id();
+	u8 my_cluster = (u8)apicid_cluster(my_id);
+#ifdef CONFIG_SMP
+	u8 lid;
+	int i;
+
+	/* Create logical APIC IDs by counting CPUs already in cluster. */
+	for (count = 0, i = NR_CPUS; --i >= 0; ) {
+		lid = cpu_2_logical_apicid[i];
+		if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
+			++count;
+	}
+#endif
+	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
+	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
+	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
+	id = my_cluster | (1UL << count);
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(id);
+	apic_write(APIC_LDR, val);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+static inline int apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
+						nr_ioapics);
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+	return apicid_2_node[hard_smp_processor_id()];
+#else
+	return 0;
+#endif
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+       if (cpu >= NR_CPUS)
+	       return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+#else
+	return logical_smp_processor_id();
+#endif
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < NR_CPUS)
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0x0F);
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int apicid)
+{
+	return physid_mask_of_physid(0);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int num_bits_set;
+	int cpus_found = 0;
+	int cpu;
+	int apicid;
+
+	num_bits_set = cpus_weight(cpumask);
+	/* Return id to all */
+	if (num_bits_set == NR_CPUS)
+		return (int) 0xFF;
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of TARGET_CPUS.
+	 */
+	cpu = first_cpu(cpumask);
+	apicid = cpu_to_logical_apicid(cpu);
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, cpumask)) {
+			int new_apicid = cpu_to_logical_apicid(cpu);
+			if (apicid_cluster(apicid) !=
+					apicid_cluster(new_apicid)){
+				printk ("%s: Not a valid mask!\n", __func__);
+				return 0xFF;
+			}
+			apicid = apicid | new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+/* cpuid returns the value latched in the HW at reset, not the APIC ID
+ * register's value.  For any box whose BIOS changes APIC IDs, like
+ * clustered APIC systems, we must use hard_smp_processor_id.
+ *
+ * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
+ */
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return hard_smp_processor_id() >> index_msb;
+}
+
+#endif /* __ASM_SUMMIT_APIC_H */
diff --git a/arch/x86/include/asm/summit/apicdef.h b/arch/x86/include/asm/summit/apicdef.h
new file mode 100644
index 0000000..f3fbca1
--- /dev/null
+++ b/arch/x86/include/asm/summit/apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SUMMIT_APICDEF_H
+#define __ASM_SUMMIT_APICDEF_H
+
+#define		APIC_ID_MASK		(0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+	return (x>>24)&0xFF;
+}
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/arch/x86/include/asm/summit/ipi.h b/arch/x86/include/asm/summit/ipi.h
new file mode 100644
index 0000000..53bd1e7
--- /dev/null
+++ b/arch/x86/include/asm/summit/ipi.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_SUMMIT_IPI_H
+#define __ASM_SUMMIT_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_SUMMIT_IPI_H */
diff --git a/arch/x86/include/asm/summit/mpparse.h b/arch/x86/include/asm/summit/mpparse.h
new file mode 100644
index 0000000..013ce6f
--- /dev/null
+++ b/arch/x86/include/asm/summit/mpparse.h
@@ -0,0 +1,109 @@
+#ifndef __ASM_SUMMIT_MPPARSE_H
+#define __ASM_SUMMIT_MPPARSE_H
+
+#include <asm/tsc.h>
+
+extern int use_cyclone;
+
+#ifdef CONFIG_X86_SUMMIT_NUMA
+extern void setup_summit(void);
+#else
+#define setup_summit()	{}
+#endif
+
+static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
+		char *productid)
+{
+	if (!strncmp(oem, "IBM ENSW", 8) &&
+			(!strncmp(productid, "VIGIL SMP", 9)
+			 || !strncmp(productid, "EXA", 3)
+			 || !strncmp(productid, "RUTHLESS SMP", 12))){
+		mark_tsc_unstable("Summit based system");
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		return 1;
+	}
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strncmp(oem_id, "IBM", 3) &&
+	    (!strncmp(oem_table_id, "SERVIGIL", 8)
+	     || !strncmp(oem_table_id, "EXA", 3))){
+		mark_tsc_unstable("Summit based system");
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		return 1;
+	}
+	return 0;
+}
+
+struct rio_table_hdr {
+	unsigned char version;      /* Version number of this data structure           */
+	                            /* Version 3 adds chassis_num & WP_index           */
+	unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
+	unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
+} __attribute__((packed));
+
+struct scal_detail {
+	unsigned char node_id;      /* Scalability Node ID                             */
+	unsigned long CBAR;         /* Address of 1MB register space                   */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
+} __attribute__((packed));
+
+struct rio_detail {
+	unsigned char node_id;      /* RIO Node ID                                     */
+	unsigned long BBAR;         /* Address of 1MB register space                   */
+	unsigned char type;         /* Type of device                                  */
+	unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
+	                            /* For CYC:  Node ID of Twister that owns this CYC */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
+	                            /* For CYC:  0                                     */
+	unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
+	                            /*                 = 0 : the XAPIC is not used, ie:*/
+	                            /*                     ints fwded to another XAPIC */
+	                            /*           Bits1:7 Reserved                      */
+	                            /* For CYC:  Bits0:7 Reserved                      */
+	unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
+	                            /*           lower slot numbers/PCI bus numbers    */
+	                            /* For CYC:  No meaning                            */
+	unsigned char chassis_num;  /* 1 based Chassis number                          */
+	                            /* For LookOut WPEGs this field indicates the      */
+	                            /* Expansion Chassis #, enumerated from Boot       */
+	                            /* Node WPEG external port, then Boot Node CYC     */
+	                            /* external port, then Next Vigil chassis WPEG     */
+	                            /* external port, etc.                             */
+	                            /* Shared Lookouts have only 1 chassis number (the */
+	                            /* first one assigned)                             */
+} __attribute__((packed));
+
+
+typedef enum {
+	CompatTwister = 0,  /* Compatibility Twister               */
+	AltTwister    = 1,  /* Alternate Twister of internal 8-way */
+	CompatCyclone = 2,  /* Compatibility Cyclone               */
+	AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
+	CompatWPEG    = 4,  /* Compatibility WPEG                  */
+	AltWPEG       = 5,  /* Second Planar WPEG                  */
+	LookOutAWPEG  = 6,  /* LookOut WPEG                        */
+	LookOutBWPEG  = 7,  /* LookOut WPEG                        */
+} node_type;
+
+static inline int is_WPEG(struct rio_detail *rio){
+	return (rio->type == CompatWPEG || rio->type == AltWPEG ||
+		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
+}
+
+#endif /* __ASM_SUMMIT_MPPARSE_H */
diff --git a/arch/x86/include/asm/suspend.h b/arch/x86/include/asm/suspend.h
new file mode 100644
index 0000000..9bd521f
--- /dev/null
+++ b/arch/x86/include/asm/suspend.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "suspend_32.h"
+#else
+# include "suspend_64.h"
+#endif
diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h
new file mode 100644
index 0000000..a5074bd
--- /dev/null
+++ b/arch/x86/include/asm/suspend_32.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2001-2002 Pavel Machek <pavel@suse.cz>
+ * Based on code
+ * Copyright 2001 Patrick Mochel <mochel@osdl.org>
+ */
+#ifndef _ASM_X86_SUSPEND_32_H
+#define _ASM_X86_SUSPEND_32_H
+
+#include <asm/desc.h>
+#include <asm/i387.h>
+
+static inline int arch_prepare_suspend(void) { return 0; }
+
+/* image of the saved processor state */
+struct saved_context {
+	u16 es, fs, gs, ss;
+	unsigned long cr0, cr2, cr3, cr4;
+	struct desc_ptr gdt;
+	struct desc_ptr idt;
+	u16 ldt;
+	u16 tss;
+	unsigned long tr;
+	unsigned long safety;
+	unsigned long return_address;
+} __attribute__((packed));
+
+#ifdef CONFIG_ACPI
+extern unsigned long saved_eip;
+extern unsigned long saved_esp;
+extern unsigned long saved_ebp;
+extern unsigned long saved_ebx;
+extern unsigned long saved_esi;
+extern unsigned long saved_edi;
+
+static inline void acpi_save_register_state(unsigned long return_point)
+{
+	saved_eip = return_point;
+	asm volatile("movl %%esp,%0" : "=m" (saved_esp));
+	asm volatile("movl %%ebp,%0" : "=m" (saved_ebp));
+	asm volatile("movl %%ebx,%0" : "=m" (saved_ebx));
+	asm volatile("movl %%edi,%0" : "=m" (saved_edi));
+	asm volatile("movl %%esi,%0" : "=m" (saved_esi));
+}
+
+#define acpi_restore_register_state()  do {} while (0)
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+#endif
+
+#endif /* _ASM_X86_SUSPEND_32_H */
diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h
new file mode 100644
index 0000000..06284f4
--- /dev/null
+++ b/arch/x86/include/asm/suspend_64.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2001-2003 Pavel Machek <pavel@suse.cz>
+ * Based on code
+ * Copyright 2001 Patrick Mochel <mochel@osdl.org>
+ */
+#ifndef _ASM_X86_SUSPEND_64_H
+#define _ASM_X86_SUSPEND_64_H
+
+#include <asm/desc.h>
+#include <asm/i387.h>
+
+static inline int arch_prepare_suspend(void)
+{
+	return 0;
+}
+
+/*
+ * Image of the saved processor state, used by the low level ACPI suspend to
+ * RAM code and by the low level hibernation code.
+ *
+ * If you modify it, fix arch/x86/kernel/acpi/wakeup_64.S and make sure that
+ * __save/__restore_processor_state(), defined in arch/x86/kernel/suspend_64.c,
+ * still work as required.
+ */
+struct saved_context {
+	struct pt_regs regs;
+	u16 ds, es, fs, gs, ss;
+	unsigned long gs_base, gs_kernel_base, fs_base;
+	unsigned long cr0, cr2, cr3, cr4, cr8;
+	unsigned long efer;
+	u16 gdt_pad;
+	u16 gdt_limit;
+	unsigned long gdt_base;
+	u16 idt_pad;
+	u16 idt_limit;
+	unsigned long idt_base;
+	u16 ldt;
+	u16 tss;
+	unsigned long tr;
+	unsigned long safety;
+	unsigned long return_address;
+} __attribute__((packed));
+
+#define loaddebug(thread,register) \
+	set_debugreg((thread)->debugreg##register, register)
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern char core_restore_code;
+extern char restore_registers;
+
+#endif /* _ASM_X86_SUSPEND_64_H */
diff --git a/arch/x86/include/asm/swiotlb.h b/arch/x86/include/asm/swiotlb.h
new file mode 100644
index 0000000..51fb2c7
--- /dev/null
+++ b/arch/x86/include/asm/swiotlb.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_X86_SWIOTLB_H
+#define _ASM_X86_SWIOTLB_H
+
+#include <asm/dma-mapping.h>
+
+/* SWIOTLB interface */
+
+extern dma_addr_t swiotlb_map_single(struct device *hwdev, void *ptr,
+				     size_t size, int dir);
+extern void *swiotlb_alloc_coherent(struct device *hwdev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t flags);
+extern void swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
+				 size_t size, int dir);
+extern void swiotlb_sync_single_for_cpu(struct device *hwdev,
+					dma_addr_t dev_addr,
+					size_t size, int dir);
+extern void swiotlb_sync_single_for_device(struct device *hwdev,
+					   dma_addr_t dev_addr,
+					   size_t size, int dir);
+extern void swiotlb_sync_single_range_for_cpu(struct device *hwdev,
+					      dma_addr_t dev_addr,
+					      unsigned long offset,
+					      size_t size, int dir);
+extern void swiotlb_sync_single_range_for_device(struct device *hwdev,
+						 dma_addr_t dev_addr,
+						 unsigned long offset,
+						 size_t size, int dir);
+extern void swiotlb_sync_sg_for_cpu(struct device *hwdev,
+				    struct scatterlist *sg, int nelems,
+				    int dir);
+extern void swiotlb_sync_sg_for_device(struct device *hwdev,
+				       struct scatterlist *sg, int nelems,
+				       int dir);
+extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg,
+			  int nents, int direction);
+extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg,
+			     int nents, int direction);
+extern int swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
+extern void swiotlb_free_coherent(struct device *hwdev, size_t size,
+				  void *vaddr, dma_addr_t dma_handle);
+extern int swiotlb_dma_supported(struct device *hwdev, u64 mask);
+extern void swiotlb_init(void);
+
+extern int swiotlb_force;
+
+#ifdef CONFIG_SWIOTLB
+extern int swiotlb;
+extern void pci_swiotlb_init(void);
+#else
+#define swiotlb 0
+static inline void pci_swiotlb_init(void)
+{
+}
+#endif
+
+static inline void dma_mark_clean(void *addr, size_t size) {}
+
+#endif /* _ASM_X86_SWIOTLB_H */
diff --git a/arch/x86/include/asm/sync_bitops.h b/arch/x86/include/asm/sync_bitops.h
new file mode 100644
index 0000000..9d09b40
--- /dev/null
+++ b/arch/x86/include/asm/sync_bitops.h
@@ -0,0 +1,130 @@
+#ifndef _ASM_X86_SYNC_BITOPS_H
+#define _ASM_X86_SYNC_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+#define ADDR (*(volatile long *)addr)
+
+/**
+ * sync_set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void sync_set_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("lock; btsl %1,%0"
+		     : "+m" (ADDR)
+		     : "Ir" (nr)
+		     : "memory");
+}
+
+/**
+ * sync_clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * sync_clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void sync_clear_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("lock; btrl %1,%0"
+		     : "+m" (ADDR)
+		     : "Ir" (nr)
+		     : "memory");
+}
+
+/**
+ * sync_change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * sync_change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void sync_change_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("lock; btcl %1,%0"
+		     : "+m" (ADDR)
+		     : "Ir" (nr)
+		     : "memory");
+}
+
+/**
+ * sync_test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int sync_test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("lock; btsl %2,%1\n\tsbbl %0,%0"
+		     : "=r" (oldbit), "+m" (ADDR)
+		     : "Ir" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * sync_test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int sync_test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("lock; btrl %2,%1\n\tsbbl %0,%0"
+		     : "=r" (oldbit), "+m" (ADDR)
+		     : "Ir" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * sync_test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int sync_test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("lock; btcl %2,%1\n\tsbbl %0,%0"
+		     : "=r" (oldbit), "+m" (ADDR)
+		     : "Ir" (nr) : "memory");
+	return oldbit;
+}
+
+#define sync_test_bit(nr, addr) test_bit(nr, addr)
+
+#undef ADDR
+
+#endif /* _ASM_X86_SYNC_BITOPS_H */
diff --git a/arch/x86/include/asm/syscall.h b/arch/x86/include/asm/syscall.h
new file mode 100644
index 0000000..d82f39b
--- /dev/null
+++ b/arch/x86/include/asm/syscall.h
@@ -0,0 +1,213 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_X86_SYSCALL_H
+#define _ASM_X86_SYSCALL_H
+
+#include <linux/sched.h>
+#include <linux/err.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	/*
+	 * We always sign-extend a -1 value being set here,
+	 * so this is always either -1L or a syscall number.
+	 */
+	return regs->orig_ax;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->ax = regs->orig_ax;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	unsigned long error = regs->ax;
+#ifdef CONFIG_IA32_EMULATION
+	/*
+	 * TS_COMPAT is set for 32-bit syscall entries and then
+	 * remains set until we return to user mode.
+	 */
+	if (task_thread_info(task)->status & TS_COMPAT)
+		/*
+		 * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
+		 * and will match correctly in comparisons.
+		 */
+		error = (long) (int) error;
+#endif
+	return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->ax;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->ax = (long) error ?: val;
+}
+
+#ifdef CONFIG_X86_32
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(args, &regs->bx + i, n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(&regs->bx + i, args, n * sizeof(args[0]));
+}
+
+#else	 /* CONFIG_X86_64 */
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+# ifdef CONFIG_IA32_EMULATION
+	if (task_thread_info(task)->status & TS_COMPAT)
+		switch (i) {
+		case 0:
+			if (!n--) break;
+			*args++ = regs->bx;
+		case 1:
+			if (!n--) break;
+			*args++ = regs->cx;
+		case 2:
+			if (!n--) break;
+			*args++ = regs->dx;
+		case 3:
+			if (!n--) break;
+			*args++ = regs->si;
+		case 4:
+			if (!n--) break;
+			*args++ = regs->di;
+		case 5:
+			if (!n--) break;
+			*args++ = regs->bp;
+		case 6:
+			if (!n--) break;
+		default:
+			BUG();
+			break;
+		}
+	else
+# endif
+		switch (i) {
+		case 0:
+			if (!n--) break;
+			*args++ = regs->di;
+		case 1:
+			if (!n--) break;
+			*args++ = regs->si;
+		case 2:
+			if (!n--) break;
+			*args++ = regs->dx;
+		case 3:
+			if (!n--) break;
+			*args++ = regs->r10;
+		case 4:
+			if (!n--) break;
+			*args++ = regs->r8;
+		case 5:
+			if (!n--) break;
+			*args++ = regs->r9;
+		case 6:
+			if (!n--) break;
+		default:
+			BUG();
+			break;
+		}
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+# ifdef CONFIG_IA32_EMULATION
+	if (task_thread_info(task)->status & TS_COMPAT)
+		switch (i) {
+		case 0:
+			if (!n--) break;
+			regs->bx = *args++;
+		case 1:
+			if (!n--) break;
+			regs->cx = *args++;
+		case 2:
+			if (!n--) break;
+			regs->dx = *args++;
+		case 3:
+			if (!n--) break;
+			regs->si = *args++;
+		case 4:
+			if (!n--) break;
+			regs->di = *args++;
+		case 5:
+			if (!n--) break;
+			regs->bp = *args++;
+		case 6:
+			if (!n--) break;
+		default:
+			BUG();
+			break;
+		}
+	else
+# endif
+		switch (i) {
+		case 0:
+			if (!n--) break;
+			regs->di = *args++;
+		case 1:
+			if (!n--) break;
+			regs->si = *args++;
+		case 2:
+			if (!n--) break;
+			regs->dx = *args++;
+		case 3:
+			if (!n--) break;
+			regs->r10 = *args++;
+		case 4:
+			if (!n--) break;
+			regs->r8 = *args++;
+		case 5:
+			if (!n--) break;
+			regs->r9 = *args++;
+		case 6:
+			if (!n--) break;
+		default:
+			BUG();
+			break;
+		}
+}
+
+#endif	/* CONFIG_X86_32 */
+
+#endif	/* _ASM_X86_SYSCALL_H */
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
new file mode 100644
index 0000000..87803da
--- /dev/null
+++ b/arch/x86/include/asm/syscalls.h
@@ -0,0 +1,93 @@
+/*
+ * syscalls.h - Linux syscall interfaces (arch-specific)
+ *
+ * Copyright (c) 2008 Jaswinder Singh
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ */
+
+#ifndef _ASM_X86_SYSCALLS_H
+#define _ASM_X86_SYSCALLS_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/signal.h>
+
+/* Common in X86_32 and X86_64 */
+/* kernel/ioport.c */
+asmlinkage long sys_ioperm(unsigned long, unsigned long, int);
+
+/* X86_32 only */
+#ifdef CONFIG_X86_32
+/* kernel/process_32.c */
+asmlinkage int sys_fork(struct pt_regs);
+asmlinkage int sys_clone(struct pt_regs);
+asmlinkage int sys_vfork(struct pt_regs);
+asmlinkage int sys_execve(struct pt_regs);
+
+/* kernel/signal_32.c */
+asmlinkage int sys_sigsuspend(int, int, old_sigset_t);
+asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
+			     struct old_sigaction __user *);
+asmlinkage int sys_sigaltstack(unsigned long);
+asmlinkage unsigned long sys_sigreturn(unsigned long);
+asmlinkage int sys_rt_sigreturn(unsigned long);
+
+/* kernel/ioport.c */
+asmlinkage long sys_iopl(unsigned long);
+
+/* kernel/ldt.c */
+asmlinkage int sys_modify_ldt(int, void __user *, unsigned long);
+
+/* kernel/sys_i386_32.c */
+asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
+			  unsigned long, unsigned long, unsigned long);
+struct mmap_arg_struct;
+asmlinkage int old_mmap(struct mmap_arg_struct __user *);
+struct sel_arg_struct;
+asmlinkage int old_select(struct sel_arg_struct __user *);
+asmlinkage int sys_ipc(uint, int, int, int, void __user *, long);
+struct old_utsname;
+asmlinkage int sys_uname(struct old_utsname __user *);
+struct oldold_utsname;
+asmlinkage int sys_olduname(struct oldold_utsname __user *);
+
+/* kernel/tls.c */
+asmlinkage int sys_set_thread_area(struct user_desc __user *);
+asmlinkage int sys_get_thread_area(struct user_desc __user *);
+
+/* kernel/vm86_32.c */
+asmlinkage int sys_vm86old(struct pt_regs);
+asmlinkage int sys_vm86(struct pt_regs);
+
+#else /* CONFIG_X86_32 */
+
+/* X86_64 only */
+/* kernel/process_64.c */
+asmlinkage long sys_fork(struct pt_regs *);
+asmlinkage long sys_clone(unsigned long, unsigned long,
+			  void __user *, void __user *,
+			  struct pt_regs *);
+asmlinkage long sys_vfork(struct pt_regs *);
+asmlinkage long sys_execve(char __user *, char __user * __user *,
+			   char __user * __user *,
+			   struct pt_regs *);
+
+/* kernel/ioport.c */
+asmlinkage long sys_iopl(unsigned int, struct pt_regs *);
+
+/* kernel/signal_64.c */
+asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *,
+				struct pt_regs *);
+asmlinkage long sys_rt_sigreturn(struct pt_regs *);
+
+/* kernel/sys_x86_64.c */
+asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long,
+			 unsigned long, unsigned long, unsigned long);
+struct new_utsname;
+asmlinkage long sys_uname(struct new_utsname __user *);
+
+#endif /* CONFIG_X86_32 */
+#endif /* _ASM_X86_SYSCALLS_H */
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
new file mode 100644
index 0000000..2ed3f0f
--- /dev/null
+++ b/arch/x86/include/asm/system.h
@@ -0,0 +1,425 @@
+#ifndef _ASM_X86_SYSTEM_H
+#define _ASM_X86_SYSTEM_H
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/* entries in ARCH_DLINFO: */
+#ifdef CONFIG_IA32_EMULATION
+# define AT_VECTOR_SIZE_ARCH 2
+#else
+# define AT_VECTOR_SIZE_ARCH 1
+#endif
+
+#ifdef CONFIG_X86_32
+
+struct task_struct; /* one of the stranger aspects of C forward declarations */
+struct task_struct *__switch_to(struct task_struct *prev,
+				struct task_struct *next);
+
+/*
+ * Saving eflags is important. It switches not only IOPL between tasks,
+ * it also protects other tasks from NT leaking through sysenter etc.
+ */
+#define switch_to(prev, next, last)					\
+do {									\
+	/*								\
+	 * Context-switching clobbers all registers, so we clobber	\
+	 * them explicitly, via unused output variables.		\
+	 * (EAX and EBP is not listed because EBP is saved/restored	\
+	 * explicitly for wchan access and EAX is the return value of	\
+	 * __switch_to())						\
+	 */								\
+	unsigned long ebx, ecx, edx, esi, edi;				\
+									\
+	asm volatile("pushfl\n\t"		/* save    flags */	\
+		     "pushl %%ebp\n\t"		/* save    EBP   */	\
+		     "movl %%esp,%[prev_sp]\n\t"	/* save    ESP   */ \
+		     "movl %[next_sp],%%esp\n\t"	/* restore ESP   */ \
+		     "movl $1f,%[prev_ip]\n\t"	/* save    EIP   */	\
+		     "pushl %[next_ip]\n\t"	/* restore EIP   */	\
+		     "jmp __switch_to\n"	/* regparm call  */	\
+		     "1:\t"						\
+		     "popl %%ebp\n\t"		/* restore EBP   */	\
+		     "popfl\n"			/* restore flags */	\
+									\
+		     /* output parameters */				\
+		     : [prev_sp] "=m" (prev->thread.sp),		\
+		       [prev_ip] "=m" (prev->thread.ip),		\
+		       "=a" (last),					\
+									\
+		       /* clobbered output registers: */		\
+		       "=b" (ebx), "=c" (ecx), "=d" (edx),		\
+		       "=S" (esi), "=D" (edi)				\
+		       							\
+		       /* input parameters: */				\
+		     : [next_sp]  "m" (next->thread.sp),		\
+		       [next_ip]  "m" (next->thread.ip),		\
+		       							\
+		       /* regparm parameters for __switch_to(): */	\
+		       [prev]     "a" (prev),				\
+		       [next]     "d" (next)				\
+									\
+		     : /* reloaded segment registers */			\
+			"memory");					\
+} while (0)
+
+/*
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+#else
+#define __SAVE(reg, offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t"
+#define __RESTORE(reg, offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t"
+
+/* frame pointer must be last for get_wchan */
+#define SAVE_CONTEXT    "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
+#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t"
+
+#define __EXTRA_CLOBBER  \
+	, "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
+	  "r12", "r13", "r14", "r15"
+
+/* Save restore flags to clear handle leaking NT */
+#define switch_to(prev, next, last) \
+	asm volatile(SAVE_CONTEXT						    \
+	     "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */	  \
+	     "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */	  \
+	     "call __switch_to\n\t"					  \
+	     ".globl thread_return\n"					  \
+	     "thread_return:\n\t"					  \
+	     "movq %%gs:%P[pda_pcurrent],%%rsi\n\t"			  \
+	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
+	     LOCK_PREFIX "btr  %[tif_fork],%P[ti_flags](%%r8)\n\t"	  \
+	     "movq %%rax,%%rdi\n\t" 					  \
+	     "jc   ret_from_fork\n\t"					  \
+	     RESTORE_CONTEXT						  \
+	     : "=a" (last)					  	  \
+	     : [next] "S" (next), [prev] "D" (prev),			  \
+	       [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
+	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
+	       [tif_fork] "i" (TIF_FORK),			  	  \
+	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
+	       [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent))  \
+	     : "memory", "cc" __EXTRA_CLOBBER)
+#endif
+
+#ifdef __KERNEL__
+#define _set_base(addr, base) do { unsigned long __pr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %%dl,%2\n\t" \
+	"movb %%dh,%3" \
+	:"=&d" (__pr) \
+	:"m" (*((addr)+2)), \
+	 "m" (*((addr)+4)), \
+	 "m" (*((addr)+7)), \
+	 "0" (base) \
+	); } while (0)
+
+#define _set_limit(addr, limit) do { unsigned long __lr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %2,%%dh\n\t" \
+	"andb $0xf0,%%dh\n\t" \
+	"orb %%dh,%%dl\n\t" \
+	"movb %%dl,%2" \
+	:"=&d" (__lr) \
+	:"m" (*(addr)), \
+	 "m" (*((addr)+6)), \
+	 "0" (limit) \
+	); } while (0)
+
+#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
+#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
+
+extern void native_load_gs_index(unsigned);
+
+/*
+ * Load a segment. Fall back on loading the zero
+ * segment if something goes wrong..
+ */
+#define loadsegment(seg, value)			\
+	asm volatile("\n"			\
+		     "1:\t"			\
+		     "movl %k0,%%" #seg "\n"	\
+		     "2:\n"			\
+		     ".section .fixup,\"ax\"\n"	\
+		     "3:\t"			\
+		     "movl %k1, %%" #seg "\n\t"	\
+		     "jmp 2b\n"			\
+		     ".previous\n"		\
+		     _ASM_EXTABLE(1b,3b)	\
+		     : :"r" (value), "r" (0) : "memory")
+
+
+/*
+ * Save a segment register away
+ */
+#define savesegment(seg, value)				\
+	asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
+
+static inline unsigned long get_limit(unsigned long segment)
+{
+	unsigned long __limit;
+	asm("lsll %1,%0" : "=r" (__limit) : "r" (segment));
+	return __limit + 1;
+}
+
+static inline void native_clts(void)
+{
+	asm volatile("clts");
+}
+
+/*
+ * Volatile isn't enough to prevent the compiler from reordering the
+ * read/write functions for the control registers and messing everything up.
+ * A memory clobber would solve the problem, but would prevent reordering of
+ * all loads stores around it, which can hurt performance. Solution is to
+ * use a variable and mimic reads and writes to it to enforce serialization
+ */
+static unsigned long __force_order;
+
+static inline unsigned long native_read_cr0(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr0(unsigned long val)
+{
+	asm volatile("mov %0,%%cr0": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr2(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr2(unsigned long val)
+{
+	asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr3(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr3(unsigned long val)
+{
+	asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr4(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline unsigned long native_read_cr4_safe(void)
+{
+	unsigned long val;
+	/* This could fault if %cr4 does not exist. In x86_64, a cr4 always
+	 * exists, so it will never fail. */
+#ifdef CONFIG_X86_32
+	asm volatile("1: mov %%cr4, %0\n"
+		     "2:\n"
+		     _ASM_EXTABLE(1b, 2b)
+		     : "=r" (val), "=m" (__force_order) : "0" (0));
+#else
+	val = native_read_cr4();
+#endif
+	return val;
+}
+
+static inline void native_write_cr4(unsigned long val)
+{
+	asm volatile("mov %0,%%cr4": : "r" (val), "m" (__force_order));
+}
+
+#ifdef CONFIG_X86_64
+static inline unsigned long native_read_cr8(void)
+{
+	unsigned long cr8;
+	asm volatile("movq %%cr8,%0" : "=r" (cr8));
+	return cr8;
+}
+
+static inline void native_write_cr8(unsigned long val)
+{
+	asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
+}
+#endif
+
+static inline void native_wbinvd(void)
+{
+	asm volatile("wbinvd": : :"memory");
+}
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define read_cr0()	(native_read_cr0())
+#define write_cr0(x)	(native_write_cr0(x))
+#define read_cr2()	(native_read_cr2())
+#define write_cr2(x)	(native_write_cr2(x))
+#define read_cr3()	(native_read_cr3())
+#define write_cr3(x)	(native_write_cr3(x))
+#define read_cr4()	(native_read_cr4())
+#define read_cr4_safe()	(native_read_cr4_safe())
+#define write_cr4(x)	(native_write_cr4(x))
+#define wbinvd()	(native_wbinvd())
+#ifdef CONFIG_X86_64
+#define read_cr8()	(native_read_cr8())
+#define write_cr8(x)	(native_write_cr8(x))
+#define load_gs_index   native_load_gs_index
+#endif
+
+/* Clear the 'TS' bit */
+#define clts()		(native_clts())
+
+#endif/* CONFIG_PARAVIRT */
+
+#define stts() write_cr0(read_cr0() | X86_CR0_TS)
+
+#endif /* __KERNEL__ */
+
+static inline void clflush(volatile void *__p)
+{
+	asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p));
+}
+
+#define nop() asm volatile ("nop")
+
+void disable_hlt(void);
+void enable_hlt(void);
+
+void cpu_idle_wait(void);
+
+extern unsigned long arch_align_stack(unsigned long sp);
+extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
+
+void default_idle(void);
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+/*
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define mb() 	asm volatile("mfence":::"memory")
+#define rmb()	asm volatile("lfence":::"memory")
+#define wmb()	asm volatile("sfence" ::: "memory")
+#endif
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+# define smp_rmb()	rmb()
+#else
+# define smp_rmb()	barrier()
+#endif
+#ifdef CONFIG_X86_OOSTORE
+# define smp_wmb() 	wmb()
+#else
+# define smp_wmb()	barrier()
+#endif
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif /* _ASM_X86_SYSTEM_H */
diff --git a/arch/x86/include/asm/system_64.h b/arch/x86/include/asm/system_64.h
new file mode 100644
index 0000000..1159e091
--- /dev/null
+++ b/arch/x86/include/asm/system_64.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_X86_SYSTEM_64_H
+#define _ASM_X86_SYSTEM_64_H
+
+#include <asm/segment.h>
+#include <asm/cmpxchg.h>
+
+
+static inline unsigned long read_cr8(void)
+{
+	unsigned long cr8;
+	asm volatile("movq %%cr8,%0" : "=r" (cr8));
+	return cr8;
+}
+
+static inline void write_cr8(unsigned long val)
+{
+	asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
+}
+
+#include <linux/irqflags.h>
+
+#endif /* _ASM_X86_SYSTEM_64_H */
diff --git a/arch/x86/include/asm/tce.h b/arch/x86/include/asm/tce.h
new file mode 100644
index 0000000..7a6677c
--- /dev/null
+++ b/arch/x86/include/asm/tce.h
@@ -0,0 +1,48 @@
+/*
+ * This file is derived from asm-powerpc/tce.h.
+ *
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_TCE_H
+#define _ASM_X86_TCE_H
+
+extern unsigned int specified_table_size;
+struct iommu_table;
+
+#define TCE_ENTRY_SIZE   8   /* in bytes */
+
+#define TCE_READ_SHIFT   0
+#define TCE_WRITE_SHIFT  1
+#define TCE_HUBID_SHIFT  2   /* unused */
+#define TCE_RSVD_SHIFT   8   /* unused */
+#define TCE_RPN_SHIFT    12
+#define TCE_UNUSED_SHIFT 48  /* unused */
+
+#define TCE_RPN_MASK     0x0000fffffffff000ULL
+
+extern void tce_build(struct iommu_table *tbl, unsigned long index,
+		      unsigned int npages, unsigned long uaddr, int direction);
+extern void tce_free(struct iommu_table *tbl, long index, unsigned int npages);
+extern void * __init alloc_tce_table(void);
+extern void __init free_tce_table(void *tbl);
+extern int __init build_tce_table(struct pci_dev *dev, void __iomem *bbar);
+
+#endif /* _ASM_X86_TCE_H */
diff --git a/arch/x86/include/asm/termbits.h b/arch/x86/include/asm/termbits.h
new file mode 100644
index 0000000..af1b70e
--- /dev/null
+++ b/arch/x86/include/asm/termbits.h
@@ -0,0 +1,198 @@
+#ifndef _ASM_X86_TERMBITS_H
+#define _ASM_X86_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define	   BOTHER 0010000		/* non standard rate */
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate */
+#define CMSPAR	  010000000000	/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000	/* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ASM_X86_TERMBITS_H */
diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h
new file mode 100644
index 0000000..f729563
--- /dev/null
+++ b/arch/x86/include/asm/termios.h
@@ -0,0 +1,113 @@
+#ifndef _ASM_X86_TERMIOS_H
+#define _ASM_X86_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+#include <asm/uaccess.h>
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+static inline int user_termio_to_kernel_termios(struct ktermios *termios,
+						struct termio __user *termio)
+{
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);
+	return copy_from_user(termios->c_cc, termio->c_cc, NCC);
+}
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+static inline int kernel_termios_to_user_termio(struct termio __user *termio,
+					    struct ktermios *termios)
+{
+	put_user((termios)->c_iflag, &(termio)->c_iflag);
+	put_user((termios)->c_oflag, &(termio)->c_oflag);
+	put_user((termios)->c_cflag, &(termio)->c_cflag);
+	put_user((termios)->c_lflag, &(termio)->c_lflag);
+	put_user((termios)->c_line,  &(termio)->c_line);
+	return copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);
+}
+
+static inline int user_termios_to_kernel_termios(struct ktermios *k,
+						 struct termios2 __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios2));
+}
+
+static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
+						 struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios2));
+}
+
+static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
+						   struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios));
+}
+
+static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
+						   struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios));
+}
+
+#endif	/* __KERNEL__ */
+
+#endif /* _ASM_X86_TERMIOS_H */
diff --git a/arch/x86/include/asm/therm_throt.h b/arch/x86/include/asm/therm_throt.h
new file mode 100644
index 0000000..c62349e
--- /dev/null
+++ b/arch/x86/include/asm/therm_throt.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_X86_THERM_THROT_H
+#define _ASM_X86_THERM_THROT_H
+
+#include <asm/atomic.h>
+
+extern atomic_t therm_throt_en;
+int therm_throt_process(int curr);
+
+#endif /* _ASM_X86_THERM_THROT_H */
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
new file mode 100644
index 0000000..e44d379
--- /dev/null
+++ b/arch/x86/include/asm/thread_info.h
@@ -0,0 +1,264 @@
+/* thread_info.h: low-level thread information
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_X86_THREAD_INFO_H
+#define _ASM_X86_THREAD_INFO_H
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ */
+#ifndef __ASSEMBLY__
+struct task_struct;
+struct exec_domain;
+#include <asm/processor.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			status;		/* thread synchronous flags */
+	__u32			cpu;		/* current CPU */
+	int			preempt_count;	/* 0 => preemptable,
+						   <0 => BUG */
+	mm_segment_t		addr_limit;
+	struct restart_block    restart_block;
+	void __user		*sysenter_return;
+#ifdef CONFIG_X86_32
+	unsigned long           previous_esp;   /* ESP of the previous stack in
+						   case of nested (IRQ) stacks
+						*/
+	__u8			supervisor_stack[0];
+#endif
+};
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+#else /* !__ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files
+ *   may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ * Warning: layout of LSW is hardcoded in entry.S
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* reenable singlestep on user return*/
+#define TIF_IRET		5	/* force IRET */
+#define TIF_SYSCALL_EMU		6	/* syscall emulation active */
+#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
+#define TIF_SECCOMP		8	/* secure computing */
+#define TIF_MCE_NOTIFY		10	/* notify userspace of an MCE */
+#define TIF_NOTSC		16	/* TSC is not accessible in userland */
+#define TIF_IA32		17	/* 32bit process */
+#define TIF_FORK		18	/* ret_from_fork */
+#define TIF_ABI_PENDING		19
+#define TIF_MEMDIE		20
+#define TIF_DEBUG		21	/* uses debug registers */
+#define TIF_IO_BITMAP		22	/* uses I/O bitmap */
+#define TIF_FREEZE		23	/* is freezing for suspend */
+#define TIF_FORCED_TF		24	/* true if TF in eflags artificially */
+#define TIF_DEBUGCTLMSR		25	/* uses thread_struct.debugctlmsr */
+#define TIF_DS_AREA_MSR		26      /* uses thread_struct.ds_area_msr */
+#define TIF_BTS_TRACE_TS	27      /* record scheduling event timestamps */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_IRET		(1 << TIF_IRET)
+#define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_MCE_NOTIFY		(1 << TIF_MCE_NOTIFY)
+#define _TIF_NOTSC		(1 << TIF_NOTSC)
+#define _TIF_IA32		(1 << TIF_IA32)
+#define _TIF_FORK		(1 << TIF_FORK)
+#define _TIF_ABI_PENDING	(1 << TIF_ABI_PENDING)
+#define _TIF_DEBUG		(1 << TIF_DEBUG)
+#define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
+#define _TIF_DEBUGCTLMSR	(1 << TIF_DEBUGCTLMSR)
+#define _TIF_DS_AREA_MSR	(1 << TIF_DS_AREA_MSR)
+#define _TIF_BTS_TRACE_TS	(1 << TIF_BTS_TRACE_TS)
+
+/* work to do in syscall_trace_enter() */
+#define _TIF_WORK_SYSCALL_ENTRY	\
+	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | \
+	 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | _TIF_SINGLESTEP)
+
+/* work to do in syscall_trace_leave() */
+#define _TIF_WORK_SYSCALL_EXIT	\
+	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK							\
+	(0x0000FFFF &							\
+	 ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|			\
+	   _TIF_SINGLESTEP|_TIF_SECCOMP|_TIF_SYSCALL_EMU))
+
+/* work to do on any return to user space */
+#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
+
+/* Only used for 64 bit */
+#define _TIF_DO_NOTIFY_MASK						\
+	(_TIF_SIGPENDING|_TIF_MCE_NOTIFY|_TIF_NOTIFY_RESUME)
+
+/* flags to check in __switch_to() */
+#define _TIF_WORK_CTXSW							\
+	(_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS| \
+								_TIF_NOTSC)
+
+#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW
+#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO)
+#else
+#define THREAD_FLAGS GFP_KERNEL
+#endif
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#define alloc_thread_info(tsk)						\
+	((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER))
+
+#ifdef CONFIG_X86_32
+
+#define STACK_WARN	(THREAD_SIZE/8)
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+
+/* how to get the current stack pointer from C */
+register unsigned long current_stack_pointer asm("esp") __used;
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	return (struct thread_info *)
+		(current_stack_pointer & ~(THREAD_SIZE - 1));
+}
+
+#else /* !__ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg)	 \
+	movl $-THREAD_SIZE, reg; \
+	andl %esp, reg
+
+/* use this one if reg already contains %esp */
+#define GET_THREAD_INFO_WITH_ESP(reg) \
+	andl $-THREAD_SIZE, reg
+
+#endif
+
+#else /* X86_32 */
+
+#include <asm/pda.h>
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE);
+	return ti;
+}
+
+/* do not use in interrupt context */
+static inline struct thread_info *stack_thread_info(void)
+{
+	struct thread_info *ti;
+	asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1)));
+	return ti;
+}
+
+#else /* !__ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg) \
+	movq %gs:pda_kernelstack,reg ; \
+	subq $(THREAD_SIZE-PDA_STACKOFFSET),reg
+
+#endif
+
+#endif /* !X86_32 */
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPU		0x0001	/* FPU was used by this task
+					   this quantum (SMP) */
+#define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
+#define TS_POLLING		0x0004	/* true if in idle loop
+					   and not sleeping */
+#define TS_RESTORE_SIGMASK	0x0008	/* restore signal mask in do_signal() */
+#define TS_XSAVE		0x0010	/* Use xsave/xrstor */
+
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+extern void arch_task_cache_init(void);
+extern void free_thread_info(struct thread_info *ti);
+extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
+#define arch_task_cache_init arch_task_cache_init
+#endif
+#endif /* _ASM_X86_THREAD_INFO_H */
diff --git a/arch/x86/include/asm/time.h b/arch/x86/include/asm/time.h
new file mode 100644
index 0000000..50c733a
--- /dev/null
+++ b/arch/x86/include/asm/time.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_X86_TIME_H
+#define _ASM_X86_TIME_H
+
+extern void hpet_time_init(void);
+
+#include <asm/mc146818rtc.h>
+#ifdef CONFIG_X86_32
+#include <linux/efi.h>
+
+static inline unsigned long native_get_wallclock(void)
+{
+	unsigned long retval;
+
+	if (efi_enabled)
+		retval = efi_get_time();
+	else
+		retval = mach_get_cmos_time();
+
+	return retval;
+}
+
+static inline int native_set_wallclock(unsigned long nowtime)
+{
+	int retval;
+
+	if (efi_enabled)
+		retval = efi_set_rtc_mmss(nowtime);
+	else
+		retval = mach_set_rtc_mmss(nowtime);
+
+	return retval;
+}
+
+#else
+extern void native_time_init_hook(void);
+
+static inline unsigned long native_get_wallclock(void)
+{
+	return mach_get_cmos_time();
+}
+
+static inline int native_set_wallclock(unsigned long nowtime)
+{
+	return mach_set_rtc_mmss(nowtime);
+}
+
+#endif
+
+extern void time_init(void);
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else /* !CONFIG_PARAVIRT */
+
+#define get_wallclock() native_get_wallclock()
+#define set_wallclock(x) native_set_wallclock(x)
+#define choose_time_init() hpet_time_init
+
+#endif /* CONFIG_PARAVIRT */
+
+extern unsigned long __init calibrate_cpu(void);
+
+#endif /* _ASM_X86_TIME_H */
diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
new file mode 100644
index 0000000..2bb6a83
--- /dev/null
+++ b/arch/x86/include/asm/timer.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_X86_TIMER_H
+#define _ASM_X86_TIMER_H
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/percpu.h>
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+unsigned long long native_sched_clock(void);
+unsigned long native_calibrate_tsc(void);
+
+#ifdef CONFIG_X86_32
+extern int timer_ack;
+extern int recalibrate_cpu_khz(void);
+#endif /* CONFIG_X86_32 */
+
+extern int no_timer_check;
+
+#ifndef CONFIG_PARAVIRT
+#define calibrate_tsc() native_calibrate_tsc()
+#endif
+
+/* Accelerators for sched_clock()
+ * convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *		ns = cycles / (freq / ns_per_sec)
+ *		ns = cycles * (ns_per_sec / freq)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
+ *
+ *	Then we use scaling math (suggested by george@mvista.com) to get:
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
+ *		ns = cycles * cyc2ns_scale / SC
+ *
+ *	And since SC is a constant power of two, we can convert the div
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better precision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
+ *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+
+DECLARE_PER_CPU(unsigned long, cyc2ns);
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline unsigned long long __cycles_2_ns(unsigned long long cyc)
+{
+	return cyc * per_cpu(cyc2ns, smp_processor_id()) >> CYC2NS_SCALE_FACTOR;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+	unsigned long long ns;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ns = __cycles_2_ns(cyc);
+	local_irq_restore(flags);
+
+	return ns;
+}
+
+#endif /* _ASM_X86_TIMER_H */
diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h
new file mode 100644
index 0000000..1287dc1
--- /dev/null
+++ b/arch/x86/include/asm/timex.h
@@ -0,0 +1,19 @@
+/* x86 architecture timex specifications */
+#ifndef _ASM_X86_TIMEX_H
+#define _ASM_X86_TIMEX_H
+
+#include <asm/processor.h>
+#include <asm/tsc.h>
+
+#ifdef CONFIG_X86_ELAN
+#  define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */
+#elif defined(CONFIG_X86_RDC321X)
+#  define PIT_TICK_RATE 1041667 /* Underlying HZ for R8610 */
+#else
+#  define PIT_TICK_RATE 1193182 /* Underlying HZ */
+#endif
+#define CLOCK_TICK_RATE	PIT_TICK_RATE
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif /* _ASM_X86_TIMEX_H */
diff --git a/arch/x86/include/asm/tlb.h b/arch/x86/include/asm/tlb.h
new file mode 100644
index 0000000..829215f
--- /dev/null
+++ b/arch/x86/include/asm/tlb.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_X86_TLB_H
+#define _ASM_X86_TLB_H
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_X86_TLB_H */
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
new file mode 100644
index 0000000..0e7bbb5
--- /dev/null
+++ b/arch/x86/include/asm/tlbflush.h
@@ -0,0 +1,178 @@
+#ifndef _ASM_X86_TLBFLUSH_H
+#define _ASM_X86_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define __flush_tlb() __native_flush_tlb()
+#define __flush_tlb_global() __native_flush_tlb_global()
+#define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
+#endif
+
+static inline void __native_flush_tlb(void)
+{
+	write_cr3(read_cr3());
+}
+
+static inline void __native_flush_tlb_global(void)
+{
+	unsigned long flags;
+	unsigned long cr4;
+
+	/*
+	 * Read-modify-write to CR4 - protect it from preemption and
+	 * from interrupts. (Use the raw variant because this code can
+	 * be called from deep inside debugging code.)
+	 */
+	raw_local_irq_save(flags);
+
+	cr4 = read_cr4();
+	/* clear PGE */
+	write_cr4(cr4 & ~X86_CR4_PGE);
+	/* write old PGE again and flush TLBs */
+	write_cr4(cr4);
+
+	raw_local_irq_restore(flags);
+}
+
+static inline void __native_flush_tlb_single(unsigned long addr)
+{
+	asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
+}
+
+static inline void __flush_tlb_all(void)
+{
+	if (cpu_has_pge)
+		__flush_tlb_global();
+	else
+		__flush_tlb();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	if (cpu_has_invlpg)
+		__flush_tlb_single(addr);
+	else
+		__flush_tlb();
+}
+
+#ifdef CONFIG_X86_32
+# define TLB_FLUSH_ALL	0xffffffff
+#else
+# define TLB_FLUSH_ALL	-1ULL
+#endif
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_others(cpumask, mm, va) flushes TLBs on other cpus
+ *
+ * ..but the i386 has somewhat limited tlb flushing capabilities,
+ * and page-granular flushes are available only on i486 and up.
+ *
+ * x86-64 can only flush individual pages or full VMs. For a range flush
+ * we always do the full VM. Might be worth trying if for a small
+ * range a few INVLPGs in a row are a win.
+ */
+
+#ifndef CONFIG_SMP
+
+#define flush_tlb() __flush_tlb()
+#define flush_tlb_all() __flush_tlb_all()
+#define local_flush_tlb() __flush_tlb()
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		__flush_tlb();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long addr)
+{
+	if (vma->vm_mm == current->active_mm)
+		__flush_tlb_one(addr);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	if (vma->vm_mm == current->active_mm)
+		__flush_tlb();
+}
+
+static inline void native_flush_tlb_others(const cpumask_t *cpumask,
+					   struct mm_struct *mm,
+					   unsigned long va)
+{
+}
+
+static inline void reset_lazy_tlbstate(void)
+{
+}
+
+#else  /* SMP */
+
+#include <asm/smp.h>
+
+#define local_flush_tlb() __flush_tlb()
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_current_task(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+
+#define flush_tlb()	flush_tlb_current_task()
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	flush_tlb_mm(vma->vm_mm);
+}
+
+void native_flush_tlb_others(const cpumask_t *cpumask, struct mm_struct *mm,
+			     unsigned long va);
+
+#define TLBSTATE_OK	1
+#define TLBSTATE_LAZY	2
+
+#ifdef CONFIG_X86_32
+struct tlb_state {
+	struct mm_struct *active_mm;
+	int state;
+	char __cacheline_padding[L1_CACHE_BYTES-8];
+};
+DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
+
+void reset_lazy_tlbstate(void);
+#else
+static inline void reset_lazy_tlbstate(void)
+{
+}
+#endif
+
+#endif	/* SMP */
+
+#ifndef CONFIG_PARAVIRT
+#define flush_tlb_others(mask, mm, va)	native_flush_tlb_others(&mask, mm, va)
+#endif
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	flush_tlb_all();
+}
+
+#endif /* _ASM_X86_TLBFLUSH_H */
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
new file mode 100644
index 0000000..90ac771
--- /dev/null
+++ b/arch/x86/include/asm/topology.h
@@ -0,0 +1,258 @@
+/*
+ * Written by: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#ifndef _ASM_X86_TOPOLOGY_H
+#define _ASM_X86_TOPOLOGY_H
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_HT
+#  define ENABLE_TOPO_DEFINES
+# endif
+#else
+# ifdef CONFIG_SMP
+#  define ENABLE_TOPO_DEFINES
+# endif
+#endif
+
+/* Node not present */
+#define NUMA_NO_NODE	(-1)
+
+#ifdef CONFIG_NUMA
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+
+#ifdef CONFIG_X86_32
+
+/* Mappings between node number and cpus on that node. */
+extern cpumask_t node_to_cpumask_map[];
+
+/* Mappings between logical cpu number and node number */
+extern int cpu_to_node_map[];
+
+/* Returns the number of the node containing CPU 'cpu' */
+static inline int cpu_to_node(int cpu)
+{
+	return cpu_to_node_map[cpu];
+}
+#define early_cpu_to_node(cpu)	cpu_to_node(cpu)
+
+/* Returns a bitmask of CPUs on Node 'node'.
+ *
+ * Side note: this function creates the returned cpumask on the stack
+ * so with a high NR_CPUS count, excessive stack space is used.  The
+ * node_to_cpumask_ptr function should be used whenever possible.
+ */
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return node_to_cpumask_map[node];
+}
+
+#else /* CONFIG_X86_64 */
+
+/* Mappings between node number and cpus on that node. */
+extern cpumask_t *node_to_cpumask_map;
+
+/* Mappings between logical cpu number and node number */
+DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map);
+
+/* Returns the number of the current Node. */
+#define numa_node_id()		read_pda(nodenumber)
+
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+extern int cpu_to_node(int cpu);
+extern int early_cpu_to_node(int cpu);
+extern const cpumask_t *_node_to_cpumask_ptr(int node);
+extern cpumask_t node_to_cpumask(int node);
+
+#else	/* !CONFIG_DEBUG_PER_CPU_MAPS */
+
+/* Returns the number of the node containing CPU 'cpu' */
+static inline int cpu_to_node(int cpu)
+{
+	return per_cpu(x86_cpu_to_node_map, cpu);
+}
+
+/* Same function but used if called before per_cpu areas are setup */
+static inline int early_cpu_to_node(int cpu)
+{
+	if (early_per_cpu_ptr(x86_cpu_to_node_map))
+		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
+
+	return per_cpu(x86_cpu_to_node_map, cpu);
+}
+
+/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
+static inline const cpumask_t *_node_to_cpumask_ptr(int node)
+{
+	return &node_to_cpumask_map[node];
+}
+
+/* Returns a bitmask of CPUs on Node 'node'. */
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return node_to_cpumask_map[node];
+}
+
+#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
+
+/* Replace default node_to_cpumask_ptr with optimized version */
+#define node_to_cpumask_ptr(v, node)		\
+		const cpumask_t *v = _node_to_cpumask_ptr(node)
+
+#define node_to_cpumask_ptr_next(v, node)	\
+			   v = _node_to_cpumask_ptr(node)
+
+#endif /* CONFIG_X86_64 */
+
+/*
+ * Returns the number of the node containing Node 'node'. This
+ * architecture is flat, so it is a pretty simple function!
+ */
+#define parent_node(node) (node)
+
+#define pcibus_to_node(bus) __pcibus_to_node(bus)
+#define pcibus_to_cpumask(bus) __pcibus_to_cpumask(bus)
+
+#ifdef CONFIG_X86_32
+extern unsigned long node_start_pfn[];
+extern unsigned long node_end_pfn[];
+extern unsigned long node_remap_size[];
+#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid])
+
+# define SD_CACHE_NICE_TRIES	1
+# define SD_IDLE_IDX		1
+# define SD_NEWIDLE_IDX		2
+# define SD_FORKEXEC_IDX	0
+
+#else
+
+# define SD_CACHE_NICE_TRIES	2
+# define SD_IDLE_IDX		2
+# define SD_NEWIDLE_IDX		2
+# define SD_FORKEXEC_IDX	1
+
+#endif
+
+/* sched_domains SD_NODE_INIT for NUMAQ machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= SD_CACHE_NICE_TRIES,	\
+	.busy_idx		= 3,			\
+	.idle_idx		= SD_IDLE_IDX,		\
+	.newidle_idx		= SD_NEWIDLE_IDX,	\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= SD_FORKEXEC_IDX,	\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_FORK	\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+}
+
+#ifdef CONFIG_X86_64_ACPI_NUMA
+extern int __node_distance(int, int);
+#define node_distance(a, b) __node_distance(a, b)
+#endif
+
+#else /* !CONFIG_NUMA */
+
+#define numa_node_id()		0
+#define	cpu_to_node(cpu)	0
+#define	early_cpu_to_node(cpu)	0
+
+static inline const cpumask_t *_node_to_cpumask_ptr(int node)
+{
+	return &cpu_online_map;
+}
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return cpu_online_map;
+}
+static inline int node_to_first_cpu(int node)
+{
+	return first_cpu(cpu_online_map);
+}
+
+/* Replace default node_to_cpumask_ptr with optimized version */
+#define node_to_cpumask_ptr(v, node)		\
+		const cpumask_t *v = _node_to_cpumask_ptr(node)
+
+#define node_to_cpumask_ptr_next(v, node)	\
+			   v = _node_to_cpumask_ptr(node)
+#endif
+
+#include <asm-generic/topology.h>
+
+#ifdef CONFIG_NUMA
+/* Returns the number of the first CPU on Node 'node'. */
+static inline int node_to_first_cpu(int node)
+{
+	node_to_cpumask_ptr(mask, node);
+	return first_cpu(*mask);
+}
+#endif
+
+extern cpumask_t cpu_coregroup_map(int cpu);
+
+#ifdef ENABLE_TOPO_DEFINES
+#define topology_physical_package_id(cpu)	(cpu_data(cpu).phys_proc_id)
+#define topology_core_id(cpu)			(cpu_data(cpu).cpu_core_id)
+#define topology_core_siblings(cpu)		(per_cpu(cpu_core_map, cpu))
+#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
+
+/* indicates that pointers to the topology cpumask_t maps are valid */
+#define arch_provides_topology_pointers		yes
+#endif
+
+static inline void arch_fix_phys_package_id(int num, u32 slot)
+{
+}
+
+struct pci_bus;
+void set_pci_bus_resources_arch_default(struct pci_bus *b);
+
+#ifdef CONFIG_SMP
+#define mc_capable()			(boot_cpu_data.x86_max_cores > 1)
+#define smt_capable()			(smp_num_siblings > 1)
+#endif
+
+#ifdef CONFIG_NUMA
+extern int get_mp_bus_to_node(int busnum);
+extern void set_mp_bus_to_node(int busnum, int node);
+#else
+static inline int get_mp_bus_to_node(int busnum)
+{
+	return 0;
+}
+static inline void set_mp_bus_to_node(int busnum, int node)
+{
+}
+#endif
+
+#endif /* _ASM_X86_TOPOLOGY_H */
diff --git a/arch/x86/include/asm/trampoline.h b/arch/x86/include/asm/trampoline.h
new file mode 100644
index 0000000..fa0d79f
--- /dev/null
+++ b/arch/x86/include/asm/trampoline.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_TRAMPOLINE_H
+#define _ASM_X86_TRAMPOLINE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Trampoline 80x86 program as an array.
+ */
+extern const unsigned char trampoline_data [];
+extern const unsigned char trampoline_end  [];
+extern unsigned char *trampoline_base;
+
+extern unsigned long init_rsp;
+extern unsigned long initial_code;
+
+#define TRAMPOLINE_BASE 0x6000
+extern unsigned long setup_trampoline(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_TRAMPOLINE_H */
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
new file mode 100644
index 0000000..45dee28
--- /dev/null
+++ b/arch/x86/include/asm/traps.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_X86_TRAPS_H
+#define _ASM_X86_TRAPS_H
+
+#include <asm/debugreg.h>
+
+#ifdef CONFIG_X86_32
+#define dotraplinkage
+#else
+#define dotraplinkage asmlinkage
+#endif
+
+asmlinkage void divide_error(void);
+asmlinkage void debug(void);
+asmlinkage void nmi(void);
+asmlinkage void int3(void);
+asmlinkage void overflow(void);
+asmlinkage void bounds(void);
+asmlinkage void invalid_op(void);
+asmlinkage void device_not_available(void);
+#ifdef CONFIG_X86_64
+asmlinkage void double_fault(void);
+#endif
+asmlinkage void coprocessor_segment_overrun(void);
+asmlinkage void invalid_TSS(void);
+asmlinkage void segment_not_present(void);
+asmlinkage void stack_segment(void);
+asmlinkage void general_protection(void);
+asmlinkage void page_fault(void);
+asmlinkage void spurious_interrupt_bug(void);
+asmlinkage void coprocessor_error(void);
+asmlinkage void alignment_check(void);
+#ifdef CONFIG_X86_MCE
+asmlinkage void machine_check(void);
+#endif /* CONFIG_X86_MCE */
+asmlinkage void simd_coprocessor_error(void);
+
+dotraplinkage void do_divide_error(struct pt_regs *, long);
+dotraplinkage void do_debug(struct pt_regs *, long);
+dotraplinkage void do_nmi(struct pt_regs *, long);
+dotraplinkage void do_int3(struct pt_regs *, long);
+dotraplinkage void do_overflow(struct pt_regs *, long);
+dotraplinkage void do_bounds(struct pt_regs *, long);
+dotraplinkage void do_invalid_op(struct pt_regs *, long);
+dotraplinkage void do_device_not_available(struct pt_regs *, long);
+dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *, long);
+dotraplinkage void do_invalid_TSS(struct pt_regs *, long);
+dotraplinkage void do_segment_not_present(struct pt_regs *, long);
+dotraplinkage void do_stack_segment(struct pt_regs *, long);
+dotraplinkage void do_general_protection(struct pt_regs *, long);
+dotraplinkage void do_page_fault(struct pt_regs *, unsigned long);
+dotraplinkage void do_spurious_interrupt_bug(struct pt_regs *, long);
+dotraplinkage void do_coprocessor_error(struct pt_regs *, long);
+dotraplinkage void do_alignment_check(struct pt_regs *, long);
+#ifdef CONFIG_X86_MCE
+dotraplinkage void do_machine_check(struct pt_regs *, long);
+#endif
+dotraplinkage void do_simd_coprocessor_error(struct pt_regs *, long);
+#ifdef CONFIG_X86_32
+dotraplinkage void do_iret_error(struct pt_regs *, long);
+#endif
+
+static inline int get_si_code(unsigned long condition)
+{
+	if (condition & DR_STEP)
+		return TRAP_TRACE;
+	else if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3))
+		return TRAP_HWBKPT;
+	else
+		return TRAP_BRKPT;
+}
+
+extern int panic_on_unrecovered_nmi;
+extern int kstack_depth_to_print;
+
+#ifdef CONFIG_X86_32
+void math_error(void __user *);
+unsigned long patch_espfix_desc(unsigned long, unsigned long);
+asmlinkage void math_emulate(long);
+#endif
+
+#endif /* _ASM_X86_TRAPS_H */
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
new file mode 100644
index 0000000..38ae163
--- /dev/null
+++ b/arch/x86/include/asm/tsc.h
@@ -0,0 +1,62 @@
+/*
+ * x86 TSC related functions
+ */
+#ifndef _ASM_X86_TSC_H
+#define _ASM_X86_TSC_H
+
+#include <asm/processor.h>
+
+#define NS_SCALE	10 /* 2^10, carefully chosen */
+#define US_SCALE	32 /* 2^32, arbitralrily chosen */
+
+/*
+ * Standard way to access the cycle counter.
+ */
+typedef unsigned long long cycles_t;
+
+extern unsigned int cpu_khz;
+extern unsigned int tsc_khz;
+
+extern void disable_TSC(void);
+
+static inline cycles_t get_cycles(void)
+{
+	unsigned long long ret = 0;
+
+#ifndef CONFIG_X86_TSC
+	if (!cpu_has_tsc)
+		return 0;
+#endif
+	rdtscll(ret);
+
+	return ret;
+}
+
+static __always_inline cycles_t vget_cycles(void)
+{
+	/*
+	 * We only do VDSOs on TSC capable CPUs, so this shouldnt
+	 * access boot_cpu_data (which is not VDSO-safe):
+	 */
+#ifndef CONFIG_X86_TSC
+	if (!cpu_has_tsc)
+		return 0;
+#endif
+	return (cycles_t)__native_read_tsc();
+}
+
+extern void tsc_init(void);
+extern void mark_tsc_unstable(char *reason);
+extern int unsynchronized_tsc(void);
+int check_tsc_unstable(void);
+
+/*
+ * Boot-time check whether the TSCs are synchronized across
+ * all CPUs/cores:
+ */
+extern void check_tsc_sync_source(int cpu);
+extern void check_tsc_sync_target(void);
+
+extern int notsc_setup(char *);
+
+#endif /* _ASM_X86_TSC_H */
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
new file mode 100644
index 0000000..e6f7363
--- /dev/null
+++ b/arch/x86/include/asm/types.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_X86_TYPES_H
+#define _ASM_X86_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifdef CONFIG_X86_32
+# define BITS_PER_LONG 32
+#else
+# define BITS_PER_LONG 64
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef u64 dma64_addr_t;
+#if defined(CONFIG_X86_64) || defined(CONFIG_HIGHMEM64G)
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_TYPES_H */
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
new file mode 100644
index 0000000..99192bb
--- /dev/null
+++ b/arch/x86/include/asm/uaccess.h
@@ -0,0 +1,456 @@
+#ifndef _ASM_X86_UACCESS_H
+#define _ASM_X86_UACCESS_H
+/*
+ * User space memory access functions
+ */
+#include <linux/errno.h>
+#include <linux/compiler.h>
+#include <linux/thread_info.h>
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#define KERNEL_DS	MAKE_MM_SEG(-1UL)
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+#define __addr_ok(addr)					\
+	((unsigned long __force)(addr) <		\
+	 (current_thread_info()->addr_limit.seg))
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u33)addr + (u33)size >= (u33)current->addr_limit.seg (u65 for x86_64)
+ *
+ * This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
+ */
+
+#define __range_not_ok(addr, size)					\
+({									\
+	unsigned long flag, roksum;					\
+	__chk_user_ptr(addr);						\
+	asm("add %3,%1 ; sbb %0,%0 ; cmp %1,%4 ; sbb $0,%0"		\
+	    : "=&r" (flag), "=r" (roksum)				\
+	    : "1" (addr), "g" ((long)(size)),				\
+	      "rm" (current_thread_info()->addr_limit.seg));		\
+	flag;								\
+})
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#define access_ok(type, addr, size) (likely(__range_not_ok(addr, size) == 0))
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+
+extern int __get_user_1(void);
+extern int __get_user_2(void);
+extern int __get_user_4(void);
+extern int __get_user_8(void);
+extern int __get_user_bad(void);
+
+#define __get_user_x(size, ret, x, ptr)		      \
+	asm volatile("call __get_user_" #size	      \
+		     : "=a" (ret),"=d" (x)	      \
+		     : "0" (ptr))		      \
+
+/* Careful: we have to cast the result to the type of the pointer
+ * for sign reasons */
+
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#ifdef CONFIG_X86_32
+#define __get_user_8(__ret_gu, __val_gu, ptr)				\
+		__get_user_x(X, __ret_gu, __val_gu, ptr)
+#else
+#define __get_user_8(__ret_gu, __val_gu, ptr)				\
+		__get_user_x(8, __ret_gu, __val_gu, ptr)
+#endif
+
+#define get_user(x, ptr)						\
+({									\
+	int __ret_gu;							\
+	unsigned long __val_gu;						\
+	__chk_user_ptr(ptr);						\
+	might_fault();							\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		__get_user_x(1, __ret_gu, __val_gu, ptr);		\
+		break;							\
+	case 2:								\
+		__get_user_x(2, __ret_gu, __val_gu, ptr);		\
+		break;							\
+	case 4:								\
+		__get_user_x(4, __ret_gu, __val_gu, ptr);		\
+		break;							\
+	case 8:								\
+		__get_user_8(__ret_gu, __val_gu, ptr);			\
+		break;							\
+	default:							\
+		__get_user_x(X, __ret_gu, __val_gu, ptr);		\
+		break;							\
+	}								\
+	(x) = (__typeof__(*(ptr)))__val_gu;				\
+	__ret_gu;							\
+})
+
+#define __put_user_x(size, x, ptr, __ret_pu)			\
+	asm volatile("call __put_user_" #size : "=a" (__ret_pu)	\
+		     :"0" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+
+
+
+#ifdef CONFIG_X86_32
+#define __put_user_u64(x, addr, err)					\
+	asm volatile("1:	movl %%eax,0(%2)\n"			\
+		     "2:	movl %%edx,4(%2)\n"			\
+		     "3:\n"						\
+		     ".section .fixup,\"ax\"\n"				\
+		     "4:	movl %3,%0\n"				\
+		     "	jmp 3b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE(1b, 4b)				\
+		     _ASM_EXTABLE(2b, 4b)				\
+		     : "=r" (err)					\
+		     : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
+
+#define __put_user_x8(x, ptr, __ret_pu)				\
+	asm volatile("call __put_user_8" : "=a" (__ret_pu)	\
+		     : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+#else
+#define __put_user_u64(x, ptr, retval) \
+	__put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT)
+#define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
+#endif
+
+extern void __put_user_bad(void);
+
+/*
+ * Strange magic calling convention: pointer in %ecx,
+ * value in %eax(:%edx), return value in %eax. clobbers %rbx
+ */
+extern void __put_user_1(void);
+extern void __put_user_2(void);
+extern void __put_user_4(void);
+extern void __put_user_8(void);
+
+#ifdef CONFIG_X86_WP_WORKS_OK
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x, ptr)					\
+({								\
+	int __ret_pu;						\
+	__typeof__(*(ptr)) __pu_val;				\
+	__chk_user_ptr(ptr);					\
+	might_fault();						\
+	__pu_val = x;						\
+	switch (sizeof(*(ptr))) {				\
+	case 1:							\
+		__put_user_x(1, __pu_val, ptr, __ret_pu);	\
+		break;						\
+	case 2:							\
+		__put_user_x(2, __pu_val, ptr, __ret_pu);	\
+		break;						\
+	case 4:							\
+		__put_user_x(4, __pu_val, ptr, __ret_pu);	\
+		break;						\
+	case 8:							\
+		__put_user_x8(__pu_val, ptr, __ret_pu);		\
+		break;						\
+	default:						\
+		__put_user_x(X, __pu_val, ptr, __ret_pu);	\
+		break;						\
+	}							\
+	__ret_pu;						\
+})
+
+#define __put_user_size(x, ptr, size, retval, errret)			\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	case 1:								\
+		__put_user_asm(x, ptr, retval, "b", "b", "iq", errret);	\
+		break;							\
+	case 2:								\
+		__put_user_asm(x, ptr, retval, "w", "w", "ir", errret);	\
+		break;							\
+	case 4:								\
+		__put_user_asm(x, ptr, retval, "l", "k",  "ir", errret);\
+		break;							\
+	case 8:								\
+		__put_user_u64((__typeof__(*ptr))(x), ptr, retval);	\
+		break;							\
+	default:							\
+		__put_user_bad();					\
+	}								\
+} while (0)
+
+#else
+
+#define __put_user_size(x, ptr, size, retval, errret)			\
+do {									\
+	__typeof__(*(ptr))__pus_tmp = x;				\
+	retval = 0;							\
+									\
+	if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0))	\
+		retval = errret;					\
+} while (0)
+
+#define put_user(x, ptr)					\
+({								\
+	int __ret_pu;						\
+	__typeof__(*(ptr))__pus_tmp = x;			\
+	__ret_pu = 0;						\
+	if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp,		\
+				       sizeof(*(ptr))) != 0))	\
+		__ret_pu = -EFAULT;				\
+	__ret_pu;						\
+})
+#endif
+
+#ifdef CONFIG_X86_32
+#define __get_user_asm_u64(x, ptr, retval, errret)	(x) = __get_user_bad()
+#else
+#define __get_user_asm_u64(x, ptr, retval, errret) \
+	 __get_user_asm(x, ptr, retval, "q", "", "=r", errret)
+#endif
+
+#define __get_user_size(x, ptr, size, retval, errret)			\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	case 1:								\
+		__get_user_asm(x, ptr, retval, "b", "b", "=q", errret);	\
+		break;							\
+	case 2:								\
+		__get_user_asm(x, ptr, retval, "w", "w", "=r", errret);	\
+		break;							\
+	case 4:								\
+		__get_user_asm(x, ptr, retval, "l", "k", "=r", errret);	\
+		break;							\
+	case 8:								\
+		__get_user_asm_u64(x, ptr, retval, errret);		\
+		break;							\
+	default:							\
+		(x) = __get_user_bad();					\
+	}								\
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
+	asm volatile("1:	mov"itype" %2,%"rtype"1\n"		\
+		     "2:\n"						\
+		     ".section .fixup,\"ax\"\n"				\
+		     "3:	mov %3,%0\n"				\
+		     "	xor"itype" %"rtype"1,%"rtype"1\n"		\
+		     "	jmp 2b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE(1b, 3b)				\
+		     : "=r" (err), ltype(x)				\
+		     : "m" (__m(addr)), "i" (errret), "0" (err))
+
+#define __put_user_nocheck(x, ptr, size)			\
+({								\
+	long __pu_err;						\
+	__put_user_size((x), (ptr), (size), __pu_err, -EFAULT);	\
+	__pu_err;						\
+})
+
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	long __gu_err;							\
+	unsigned long __gu_val;						\
+	__get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT);	\
+	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
+	__gu_err;							\
+})
+
+/* FIXME: this hack is definitely wrong -AK */
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
+	asm volatile("1:	mov"itype" %"rtype"1,%2\n"		\
+		     "2:\n"						\
+		     ".section .fixup,\"ax\"\n"				\
+		     "3:	mov %3,%0\n"				\
+		     "	jmp 2b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE(1b, 3b)				\
+		     : "=r"(err)					\
+		     : ltype(x), "m" (__m(addr)), "i" (errret), "0" (err))
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+
+#define __get_user(x, ptr)						\
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+
+#define __put_user(x, ptr)						\
+	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+
+/*
+ * movsl can be slow when source and dest are not both 8-byte aligned
+ */
+#ifdef CONFIG_X86_INTEL_USERCOPY
+extern struct movsl_mask {
+	int mask;
+} ____cacheline_aligned_in_smp movsl_mask;
+#endif
+
+#define ARCH_HAS_NOCACHE_UACCESS 1
+
+#ifdef CONFIG_X86_32
+# include "uaccess_32.h"
+#else
+# define ARCH_HAS_SEARCH_EXTABLE
+# include "uaccess_64.h"
+#endif
+
+#endif /* _ASM_X86_UACCESS_H */
+
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
new file mode 100644
index 0000000..5e06259
--- /dev/null
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -0,0 +1,218 @@
+#ifndef _ASM_X86_UACCESS_32_H
+#define _ASM_X86_UACCESS_32_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
+unsigned long __must_check __copy_to_user_ll
+		(void __user *to, const void *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll
+		(void *to, const void __user *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll_nozero
+		(void *to, const void __user *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll_nocache
+		(void *to, const void __user *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll_nocache_nozero
+		(void *to, const void __user *from, unsigned long n);
+
+/**
+ * __copy_to_user_inatomic: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ * The caller should also make sure he pins the user space address
+ * so that the we don't result in page fault and sleep.
+ *
+ * Here we special-case 1, 2 and 4-byte copy_*_user invocations.  On a fault
+ * we return the initial request size (1, 2 or 4), as copy_*_user should do.
+ * If a store crosses a page boundary and gets a fault, the x86 will not write
+ * anything, so this is accurate.
+ */
+
+static __always_inline unsigned long __must_check
+__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__put_user_size(*(u8 *)from, (u8 __user *)to,
+					1, ret, 1);
+			return ret;
+		case 2:
+			__put_user_size(*(u16 *)from, (u16 __user *)to,
+					2, ret, 2);
+			return ret;
+		case 4:
+			__put_user_size(*(u32 *)from, (u32 __user *)to,
+					4, ret, 4);
+			return ret;
+		}
+	}
+	return __copy_to_user_ll(to, from, n);
+}
+
+/**
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static __always_inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	might_fault();
+	return __copy_to_user_inatomic(to, from, n);
+}
+
+static __always_inline unsigned long
+__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
+{
+	/* Avoid zeroing the tail if the copy fails..
+	 * If 'n' is constant and 1, 2, or 4, we do still zero on a failure,
+	 * but as the zeroing behaviour is only significant when n is not
+	 * constant, that shouldn't be a problem.
+	 */
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			return ret;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			return ret;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			return ret;
+		}
+	}
+	return __copy_from_user_ll_nozero(to, from, n);
+}
+
+/**
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ *
+ * An alternate version - __copy_from_user_inatomic() - may be called from
+ * atomic context and will fail rather than sleep.  In this case the
+ * uncopied bytes will *NOT* be padded with zeros.  See fs/filemap.h
+ * for explanation of why this is needed.
+ */
+static __always_inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	might_fault();
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			return ret;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			return ret;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			return ret;
+		}
+	}
+	return __copy_from_user_ll(to, from, n);
+}
+
+static __always_inline unsigned long __copy_from_user_nocache(void *to,
+				const void __user *from, unsigned long n)
+{
+	might_fault();
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			return ret;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			return ret;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			return ret;
+		}
+	}
+	return __copy_from_user_ll_nocache(to, from, n);
+}
+
+static __always_inline unsigned long
+__copy_from_user_inatomic_nocache(void *to, const void __user *from,
+				  unsigned long n)
+{
+       return __copy_from_user_ll_nocache_nozero(to, from, n);
+}
+
+unsigned long __must_check copy_to_user(void __user *to,
+					const void *from, unsigned long n);
+unsigned long __must_check copy_from_user(void *to,
+					  const void __user *from,
+					  unsigned long n);
+long __must_check strncpy_from_user(char *dst, const char __user *src,
+				    long count);
+long __must_check __strncpy_from_user(char *dst,
+				      const char __user *src, long count);
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str) strnlen_user(str, LONG_MAX)
+
+long strnlen_user(const char __user *str, long n);
+unsigned long __must_check clear_user(void __user *mem, unsigned long len);
+unsigned long __must_check __clear_user(void __user *mem, unsigned long len);
+
+#endif /* _ASM_X86_UACCESS_32_H */
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
new file mode 100644
index 0000000..543ba88
--- /dev/null
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -0,0 +1,208 @@
+#ifndef _ASM_X86_UACCESS_64_H
+#define _ASM_X86_UACCESS_64_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/prefetch.h>
+#include <linux/lockdep.h>
+#include <asm/page.h>
+
+/*
+ * Copy To/From Userspace
+ */
+
+/* Handles exceptions in both to and from, but doesn't do access_ok */
+__must_check unsigned long
+copy_user_generic(void *to, const void *from, unsigned len);
+
+__must_check unsigned long
+copy_to_user(void __user *to, const void *from, unsigned len);
+__must_check unsigned long
+copy_from_user(void *to, const void __user *from, unsigned len);
+__must_check unsigned long
+copy_in_user(void __user *to, const void __user *from, unsigned len);
+
+static __always_inline __must_check
+int __copy_from_user(void *dst, const void __user *src, unsigned size)
+{
+	int ret = 0;
+
+	might_fault();
+	if (!__builtin_constant_p(size))
+		return copy_user_generic(dst, (__force void *)src, size);
+	switch (size) {
+	case 1:__get_user_asm(*(u8 *)dst, (u8 __user *)src,
+			      ret, "b", "b", "=q", 1);
+		return ret;
+	case 2:__get_user_asm(*(u16 *)dst, (u16 __user *)src,
+			      ret, "w", "w", "=r", 2);
+		return ret;
+	case 4:__get_user_asm(*(u32 *)dst, (u32 __user *)src,
+			      ret, "l", "k", "=r", 4);
+		return ret;
+	case 8:__get_user_asm(*(u64 *)dst, (u64 __user *)src,
+			      ret, "q", "", "=r", 8);
+		return ret;
+	case 10:
+		__get_user_asm(*(u64 *)dst, (u64 __user *)src,
+			       ret, "q", "", "=r", 16);
+		if (unlikely(ret))
+			return ret;
+		__get_user_asm(*(u16 *)(8 + (char *)dst),
+			       (u16 __user *)(8 + (char __user *)src),
+			       ret, "w", "w", "=r", 2);
+		return ret;
+	case 16:
+		__get_user_asm(*(u64 *)dst, (u64 __user *)src,
+			       ret, "q", "", "=r", 16);
+		if (unlikely(ret))
+			return ret;
+		__get_user_asm(*(u64 *)(8 + (char *)dst),
+			       (u64 __user *)(8 + (char __user *)src),
+			       ret, "q", "", "=r", 8);
+		return ret;
+	default:
+		return copy_user_generic(dst, (__force void *)src, size);
+	}
+}
+
+static __always_inline __must_check
+int __copy_to_user(void __user *dst, const void *src, unsigned size)
+{
+	int ret = 0;
+
+	might_fault();
+	if (!__builtin_constant_p(size))
+		return copy_user_generic((__force void *)dst, src, size);
+	switch (size) {
+	case 1:__put_user_asm(*(u8 *)src, (u8 __user *)dst,
+			      ret, "b", "b", "iq", 1);
+		return ret;
+	case 2:__put_user_asm(*(u16 *)src, (u16 __user *)dst,
+			      ret, "w", "w", "ir", 2);
+		return ret;
+	case 4:__put_user_asm(*(u32 *)src, (u32 __user *)dst,
+			      ret, "l", "k", "ir", 4);
+		return ret;
+	case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
+			      ret, "q", "", "ir", 8);
+		return ret;
+	case 10:
+		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
+			       ret, "q", "", "ir", 10);
+		if (unlikely(ret))
+			return ret;
+		asm("":::"memory");
+		__put_user_asm(4[(u16 *)src], 4 + (u16 __user *)dst,
+			       ret, "w", "w", "ir", 2);
+		return ret;
+	case 16:
+		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
+			       ret, "q", "", "ir", 16);
+		if (unlikely(ret))
+			return ret;
+		asm("":::"memory");
+		__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
+			       ret, "q", "", "ir", 8);
+		return ret;
+	default:
+		return copy_user_generic((__force void *)dst, src, size);
+	}
+}
+
+static __always_inline __must_check
+int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
+{
+	int ret = 0;
+
+	might_fault();
+	if (!__builtin_constant_p(size))
+		return copy_user_generic((__force void *)dst,
+					 (__force void *)src, size);
+	switch (size) {
+	case 1: {
+		u8 tmp;
+		__get_user_asm(tmp, (u8 __user *)src,
+			       ret, "b", "b", "=q", 1);
+		if (likely(!ret))
+			__put_user_asm(tmp, (u8 __user *)dst,
+				       ret, "b", "b", "iq", 1);
+		return ret;
+	}
+	case 2: {
+		u16 tmp;
+		__get_user_asm(tmp, (u16 __user *)src,
+			       ret, "w", "w", "=r", 2);
+		if (likely(!ret))
+			__put_user_asm(tmp, (u16 __user *)dst,
+				       ret, "w", "w", "ir", 2);
+		return ret;
+	}
+
+	case 4: {
+		u32 tmp;
+		__get_user_asm(tmp, (u32 __user *)src,
+			       ret, "l", "k", "=r", 4);
+		if (likely(!ret))
+			__put_user_asm(tmp, (u32 __user *)dst,
+				       ret, "l", "k", "ir", 4);
+		return ret;
+	}
+	case 8: {
+		u64 tmp;
+		__get_user_asm(tmp, (u64 __user *)src,
+			       ret, "q", "", "=r", 8);
+		if (likely(!ret))
+			__put_user_asm(tmp, (u64 __user *)dst,
+				       ret, "q", "", "ir", 8);
+		return ret;
+	}
+	default:
+		return copy_user_generic((__force void *)dst,
+					 (__force void *)src, size);
+	}
+}
+
+__must_check long
+strncpy_from_user(char *dst, const char __user *src, long count);
+__must_check long
+__strncpy_from_user(char *dst, const char __user *src, long count);
+__must_check long strnlen_user(const char __user *str, long n);
+__must_check long __strnlen_user(const char __user *str, long n);
+__must_check long strlen_user(const char __user *str);
+__must_check unsigned long clear_user(void __user *mem, unsigned long len);
+__must_check unsigned long __clear_user(void __user *mem, unsigned long len);
+
+__must_check long __copy_from_user_inatomic(void *dst, const void __user *src,
+					    unsigned size);
+
+static __must_check __always_inline int
+__copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
+{
+	return copy_user_generic((__force void *)dst, src, size);
+}
+
+extern long __copy_user_nocache(void *dst, const void __user *src,
+				unsigned size, int zerorest);
+
+static inline int __copy_from_user_nocache(void *dst, const void __user *src,
+					   unsigned size)
+{
+	might_sleep();
+	return __copy_user_nocache(dst, src, size, 1);
+}
+
+static inline int __copy_from_user_inatomic_nocache(void *dst,
+						    const void __user *src,
+						    unsigned size)
+{
+	return __copy_user_nocache(dst, src, size, 0);
+}
+
+unsigned long
+copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest);
+
+#endif /* _ASM_X86_UACCESS_64_H */
diff --git a/arch/x86/include/asm/ucontext.h b/arch/x86/include/asm/ucontext.h
new file mode 100644
index 0000000..87324cf
--- /dev/null
+++ b/arch/x86/include/asm/ucontext.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_UCONTEXT_H
+#define _ASM_X86_UCONTEXT_H
+
+#define UC_FP_XSTATE	0x1	/* indicates the presence of extended state
+				 * information in the memory layout pointed
+				 * by the fpstate pointer in the ucontext's
+				 * sigcontext struct (uc_mcontext).
+				 */
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* _ASM_X86_UCONTEXT_H */
diff --git a/arch/x86/include/asm/unaligned.h b/arch/x86/include/asm/unaligned.h
new file mode 100644
index 0000000..a7bd416
--- /dev/null
+++ b/arch/x86/include/asm/unaligned.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_X86_UNALIGNED_H
+#define _ASM_X86_UNALIGNED_H
+
+/*
+ * The x86 can do unaligned accesses itself.
+ */
+
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+
+#endif /* _ASM_X86_UNALIGNED_H */
diff --git a/arch/x86/include/asm/unistd.h b/arch/x86/include/asm/unistd.h
new file mode 100644
index 0000000..2a58ed3
--- /dev/null
+++ b/arch/x86/include/asm/unistd.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_X86_32
+#  include "unistd_32.h"
+# else
+#  include "unistd_64.h"
+# endif
+#else
+# ifdef __i386__
+#  include "unistd_32.h"
+# else
+#  include "unistd_64.h"
+# endif
+#endif
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
new file mode 100644
index 0000000..f2bba78
--- /dev/null
+++ b/arch/x86/include/asm/unistd_32.h
@@ -0,0 +1,379 @@
+#ifndef _ASM_X86_UNISTD_32_H
+#define _ASM_X86_UNISTD_32_H
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76   /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_madvise1		219	/* delete when C lib stub is removed */
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+/* #define __NR_sys_setaltroot	285 */
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
+#define __NR_inotify_init	291
+#define __NR_inotify_add_watch	292
+#define __NR_inotify_rm_watch	293
+#define __NR_migrate_pages	294
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+#define __NR_set_robust_list	311
+#define __NR_get_robust_list	312
+#define __NR_splice		313
+#define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
+#define __NR_move_pages		317
+#define __NR_getcpu		318
+#define __NR_epoll_pwait	319
+#define __NR_utimensat		320
+#define __NR_signalfd		321
+#define __NR_timerfd_create	322
+#define __NR_eventfd		323
+#define __NR_fallocate		324
+#define __NR_timerfd_settime	325
+#define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+
+#ifdef __KERNEL__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_X86_UNISTD_32_H */
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
new file mode 100644
index 0000000..834b2c1
--- /dev/null
+++ b/arch/x86/include/asm/unistd_64.h
@@ -0,0 +1,693 @@
+#ifndef _ASM_X86_UNISTD_64_H
+#define _ASM_X86_UNISTD_64_H
+
+#ifndef __SYSCALL
+#define __SYSCALL(a, b)
+#endif
+
+/*
+ * This file contains the system call numbers.
+ *
+ * Note: holes are not allowed.
+ */
+
+/* at least 8 syscall per cacheline */
+#define __NR_read				0
+__SYSCALL(__NR_read, sys_read)
+#define __NR_write				1
+__SYSCALL(__NR_write, sys_write)
+#define __NR_open				2
+__SYSCALL(__NR_open, sys_open)
+#define __NR_close				3
+__SYSCALL(__NR_close, sys_close)
+#define __NR_stat				4
+__SYSCALL(__NR_stat, sys_newstat)
+#define __NR_fstat				5
+__SYSCALL(__NR_fstat, sys_newfstat)
+#define __NR_lstat				6
+__SYSCALL(__NR_lstat, sys_newlstat)
+#define __NR_poll				7
+__SYSCALL(__NR_poll, sys_poll)
+
+#define __NR_lseek				8
+__SYSCALL(__NR_lseek, sys_lseek)
+#define __NR_mmap				9
+__SYSCALL(__NR_mmap, sys_mmap)
+#define __NR_mprotect				10
+__SYSCALL(__NR_mprotect, sys_mprotect)
+#define __NR_munmap				11
+__SYSCALL(__NR_munmap, sys_munmap)
+#define __NR_brk				12
+__SYSCALL(__NR_brk, sys_brk)
+#define __NR_rt_sigaction			13
+__SYSCALL(__NR_rt_sigaction, sys_rt_sigaction)
+#define __NR_rt_sigprocmask			14
+__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask)
+#define __NR_rt_sigreturn			15
+__SYSCALL(__NR_rt_sigreturn, stub_rt_sigreturn)
+
+#define __NR_ioctl				16
+__SYSCALL(__NR_ioctl, sys_ioctl)
+#define __NR_pread64				17
+__SYSCALL(__NR_pread64, sys_pread64)
+#define __NR_pwrite64				18
+__SYSCALL(__NR_pwrite64, sys_pwrite64)
+#define __NR_readv				19
+__SYSCALL(__NR_readv, sys_readv)
+#define __NR_writev				20
+__SYSCALL(__NR_writev, sys_writev)
+#define __NR_access				21
+__SYSCALL(__NR_access, sys_access)
+#define __NR_pipe				22
+__SYSCALL(__NR_pipe, sys_pipe)
+#define __NR_select				23
+__SYSCALL(__NR_select, sys_select)
+
+#define __NR_sched_yield			24
+__SYSCALL(__NR_sched_yield, sys_sched_yield)
+#define __NR_mremap				25
+__SYSCALL(__NR_mremap, sys_mremap)
+#define __NR_msync				26
+__SYSCALL(__NR_msync, sys_msync)
+#define __NR_mincore				27
+__SYSCALL(__NR_mincore, sys_mincore)
+#define __NR_madvise				28
+__SYSCALL(__NR_madvise, sys_madvise)
+#define __NR_shmget				29
+__SYSCALL(__NR_shmget, sys_shmget)
+#define __NR_shmat				30
+__SYSCALL(__NR_shmat, sys_shmat)
+#define __NR_shmctl				31
+__SYSCALL(__NR_shmctl, sys_shmctl)
+
+#define __NR_dup				32
+__SYSCALL(__NR_dup, sys_dup)
+#define __NR_dup2				33
+__SYSCALL(__NR_dup2, sys_dup2)
+#define __NR_pause				34
+__SYSCALL(__NR_pause, sys_pause)
+#define __NR_nanosleep				35
+__SYSCALL(__NR_nanosleep, sys_nanosleep)
+#define __NR_getitimer				36
+__SYSCALL(__NR_getitimer, sys_getitimer)
+#define __NR_alarm				37
+__SYSCALL(__NR_alarm, sys_alarm)
+#define __NR_setitimer				38
+__SYSCALL(__NR_setitimer, sys_setitimer)
+#define __NR_getpid				39
+__SYSCALL(__NR_getpid, sys_getpid)
+
+#define __NR_sendfile				40
+__SYSCALL(__NR_sendfile, sys_sendfile64)
+#define __NR_socket				41
+__SYSCALL(__NR_socket, sys_socket)
+#define __NR_connect				42
+__SYSCALL(__NR_connect, sys_connect)
+#define __NR_accept				43
+__SYSCALL(__NR_accept, sys_accept)
+#define __NR_sendto				44
+__SYSCALL(__NR_sendto, sys_sendto)
+#define __NR_recvfrom				45
+__SYSCALL(__NR_recvfrom, sys_recvfrom)
+#define __NR_sendmsg				46
+__SYSCALL(__NR_sendmsg, sys_sendmsg)
+#define __NR_recvmsg				47
+__SYSCALL(__NR_recvmsg, sys_recvmsg)
+
+#define __NR_shutdown				48
+__SYSCALL(__NR_shutdown, sys_shutdown)
+#define __NR_bind				49
+__SYSCALL(__NR_bind, sys_bind)
+#define __NR_listen				50
+__SYSCALL(__NR_listen, sys_listen)
+#define __NR_getsockname			51
+__SYSCALL(__NR_getsockname, sys_getsockname)
+#define __NR_getpeername			52
+__SYSCALL(__NR_getpeername, sys_getpeername)
+#define __NR_socketpair				53
+__SYSCALL(__NR_socketpair, sys_socketpair)
+#define __NR_setsockopt				54
+__SYSCALL(__NR_setsockopt, sys_setsockopt)
+#define __NR_getsockopt				55
+__SYSCALL(__NR_getsockopt, sys_getsockopt)
+
+#define __NR_clone				56
+__SYSCALL(__NR_clone, stub_clone)
+#define __NR_fork				57
+__SYSCALL(__NR_fork, stub_fork)
+#define __NR_vfork				58
+__SYSCALL(__NR_vfork, stub_vfork)
+#define __NR_execve				59
+__SYSCALL(__NR_execve, stub_execve)
+#define __NR_exit				60
+__SYSCALL(__NR_exit, sys_exit)
+#define __NR_wait4				61
+__SYSCALL(__NR_wait4, sys_wait4)
+#define __NR_kill				62
+__SYSCALL(__NR_kill, sys_kill)
+#define __NR_uname				63
+__SYSCALL(__NR_uname, sys_uname)
+
+#define __NR_semget				64
+__SYSCALL(__NR_semget, sys_semget)
+#define __NR_semop				65
+__SYSCALL(__NR_semop, sys_semop)
+#define __NR_semctl				66
+__SYSCALL(__NR_semctl, sys_semctl)
+#define __NR_shmdt				67
+__SYSCALL(__NR_shmdt, sys_shmdt)
+#define __NR_msgget				68
+__SYSCALL(__NR_msgget, sys_msgget)
+#define __NR_msgsnd				69
+__SYSCALL(__NR_msgsnd, sys_msgsnd)
+#define __NR_msgrcv				70
+__SYSCALL(__NR_msgrcv, sys_msgrcv)
+#define __NR_msgctl				71
+__SYSCALL(__NR_msgctl, sys_msgctl)
+
+#define __NR_fcntl				72
+__SYSCALL(__NR_fcntl, sys_fcntl)
+#define __NR_flock				73
+__SYSCALL(__NR_flock, sys_flock)
+#define __NR_fsync				74
+__SYSCALL(__NR_fsync, sys_fsync)
+#define __NR_fdatasync				75
+__SYSCALL(__NR_fdatasync, sys_fdatasync)
+#define __NR_truncate				76
+__SYSCALL(__NR_truncate, sys_truncate)
+#define __NR_ftruncate				77
+__SYSCALL(__NR_ftruncate, sys_ftruncate)
+#define __NR_getdents				78
+__SYSCALL(__NR_getdents, sys_getdents)
+#define __NR_getcwd				79
+__SYSCALL(__NR_getcwd, sys_getcwd)
+
+#define __NR_chdir				80
+__SYSCALL(__NR_chdir, sys_chdir)
+#define __NR_fchdir				81
+__SYSCALL(__NR_fchdir, sys_fchdir)
+#define __NR_rename				82
+__SYSCALL(__NR_rename, sys_rename)
+#define __NR_mkdir				83
+__SYSCALL(__NR_mkdir, sys_mkdir)
+#define __NR_rmdir				84
+__SYSCALL(__NR_rmdir, sys_rmdir)
+#define __NR_creat				85
+__SYSCALL(__NR_creat, sys_creat)
+#define __NR_link				86
+__SYSCALL(__NR_link, sys_link)
+#define __NR_unlink				87
+__SYSCALL(__NR_unlink, sys_unlink)
+
+#define __NR_symlink				88
+__SYSCALL(__NR_symlink, sys_symlink)
+#define __NR_readlink				89
+__SYSCALL(__NR_readlink, sys_readlink)
+#define __NR_chmod				90
+__SYSCALL(__NR_chmod, sys_chmod)
+#define __NR_fchmod				91
+__SYSCALL(__NR_fchmod, sys_fchmod)
+#define __NR_chown				92
+__SYSCALL(__NR_chown, sys_chown)
+#define __NR_fchown				93
+__SYSCALL(__NR_fchown, sys_fchown)
+#define __NR_lchown				94
+__SYSCALL(__NR_lchown, sys_lchown)
+#define __NR_umask				95
+__SYSCALL(__NR_umask, sys_umask)
+
+#define __NR_gettimeofday			96
+__SYSCALL(__NR_gettimeofday, sys_gettimeofday)
+#define __NR_getrlimit				97
+__SYSCALL(__NR_getrlimit, sys_getrlimit)
+#define __NR_getrusage				98
+__SYSCALL(__NR_getrusage, sys_getrusage)
+#define __NR_sysinfo				99
+__SYSCALL(__NR_sysinfo, sys_sysinfo)
+#define __NR_times				100
+__SYSCALL(__NR_times, sys_times)
+#define __NR_ptrace				101
+__SYSCALL(__NR_ptrace, sys_ptrace)
+#define __NR_getuid				102
+__SYSCALL(__NR_getuid, sys_getuid)
+#define __NR_syslog				103
+__SYSCALL(__NR_syslog, sys_syslog)
+
+/* at the very end the stuff that never runs during the benchmarks */
+#define __NR_getgid				104
+__SYSCALL(__NR_getgid, sys_getgid)
+#define __NR_setuid				105
+__SYSCALL(__NR_setuid, sys_setuid)
+#define __NR_setgid				106
+__SYSCALL(__NR_setgid, sys_setgid)
+#define __NR_geteuid				107
+__SYSCALL(__NR_geteuid, sys_geteuid)
+#define __NR_getegid				108
+__SYSCALL(__NR_getegid, sys_getegid)
+#define __NR_setpgid				109
+__SYSCALL(__NR_setpgid, sys_setpgid)
+#define __NR_getppid				110
+__SYSCALL(__NR_getppid, sys_getppid)
+#define __NR_getpgrp				111
+__SYSCALL(__NR_getpgrp, sys_getpgrp)
+
+#define __NR_setsid				112
+__SYSCALL(__NR_setsid, sys_setsid)
+#define __NR_setreuid				113
+__SYSCALL(__NR_setreuid, sys_setreuid)
+#define __NR_setregid				114
+__SYSCALL(__NR_setregid, sys_setregid)
+#define __NR_getgroups				115
+__SYSCALL(__NR_getgroups, sys_getgroups)
+#define __NR_setgroups				116
+__SYSCALL(__NR_setgroups, sys_setgroups)
+#define __NR_setresuid				117
+__SYSCALL(__NR_setresuid, sys_setresuid)
+#define __NR_getresuid				118
+__SYSCALL(__NR_getresuid, sys_getresuid)
+#define __NR_setresgid				119
+__SYSCALL(__NR_setresgid, sys_setresgid)
+
+#define __NR_getresgid				120
+__SYSCALL(__NR_getresgid, sys_getresgid)
+#define __NR_getpgid				121
+__SYSCALL(__NR_getpgid, sys_getpgid)
+#define __NR_setfsuid				122
+__SYSCALL(__NR_setfsuid, sys_setfsuid)
+#define __NR_setfsgid				123
+__SYSCALL(__NR_setfsgid, sys_setfsgid)
+#define __NR_getsid				124
+__SYSCALL(__NR_getsid, sys_getsid)
+#define __NR_capget				125
+__SYSCALL(__NR_capget, sys_capget)
+#define __NR_capset				126
+__SYSCALL(__NR_capset, sys_capset)
+
+#define __NR_rt_sigpending			127
+__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending)
+#define __NR_rt_sigtimedwait			128
+__SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait)
+#define __NR_rt_sigqueueinfo			129
+__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
+#define __NR_rt_sigsuspend			130
+__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend)
+#define __NR_sigaltstack			131
+__SYSCALL(__NR_sigaltstack, stub_sigaltstack)
+#define __NR_utime				132
+__SYSCALL(__NR_utime, sys_utime)
+#define __NR_mknod				133
+__SYSCALL(__NR_mknod, sys_mknod)
+
+/* Only needed for a.out */
+#define __NR_uselib				134
+__SYSCALL(__NR_uselib, sys_ni_syscall)
+#define __NR_personality			135
+__SYSCALL(__NR_personality, sys_personality)
+
+#define __NR_ustat				136
+__SYSCALL(__NR_ustat, sys_ustat)
+#define __NR_statfs				137
+__SYSCALL(__NR_statfs, sys_statfs)
+#define __NR_fstatfs				138
+__SYSCALL(__NR_fstatfs, sys_fstatfs)
+#define __NR_sysfs				139
+__SYSCALL(__NR_sysfs, sys_sysfs)
+
+#define __NR_getpriority			140
+__SYSCALL(__NR_getpriority, sys_getpriority)
+#define __NR_setpriority			141
+__SYSCALL(__NR_setpriority, sys_setpriority)
+#define __NR_sched_setparam			142
+__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
+#define __NR_sched_getparam			143
+__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
+#define __NR_sched_setscheduler			144
+__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
+#define __NR_sched_getscheduler			145
+__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
+#define __NR_sched_get_priority_max		146
+__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
+#define __NR_sched_get_priority_min		147
+__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
+#define __NR_sched_rr_get_interval		148
+__SYSCALL(__NR_sched_rr_get_interval, sys_sched_rr_get_interval)
+
+#define __NR_mlock				149
+__SYSCALL(__NR_mlock, sys_mlock)
+#define __NR_munlock				150
+__SYSCALL(__NR_munlock, sys_munlock)
+#define __NR_mlockall				151
+__SYSCALL(__NR_mlockall, sys_mlockall)
+#define __NR_munlockall				152
+__SYSCALL(__NR_munlockall, sys_munlockall)
+
+#define __NR_vhangup				153
+__SYSCALL(__NR_vhangup, sys_vhangup)
+
+#define __NR_modify_ldt				154
+__SYSCALL(__NR_modify_ldt, sys_modify_ldt)
+
+#define __NR_pivot_root				155
+__SYSCALL(__NR_pivot_root, sys_pivot_root)
+
+#define __NR__sysctl				156
+__SYSCALL(__NR__sysctl, sys_sysctl)
+
+#define __NR_prctl				157
+__SYSCALL(__NR_prctl, sys_prctl)
+#define __NR_arch_prctl				158
+__SYSCALL(__NR_arch_prctl, sys_arch_prctl)
+
+#define __NR_adjtimex				159
+__SYSCALL(__NR_adjtimex, sys_adjtimex)
+
+#define __NR_setrlimit				160
+__SYSCALL(__NR_setrlimit, sys_setrlimit)
+
+#define __NR_chroot				161
+__SYSCALL(__NR_chroot, sys_chroot)
+
+#define __NR_sync				162
+__SYSCALL(__NR_sync, sys_sync)
+
+#define __NR_acct				163
+__SYSCALL(__NR_acct, sys_acct)
+
+#define __NR_settimeofday			164
+__SYSCALL(__NR_settimeofday, sys_settimeofday)
+
+#define __NR_mount				165
+__SYSCALL(__NR_mount, sys_mount)
+#define __NR_umount2				166
+__SYSCALL(__NR_umount2, sys_umount)
+
+#define __NR_swapon				167
+__SYSCALL(__NR_swapon, sys_swapon)
+#define __NR_swapoff				168
+__SYSCALL(__NR_swapoff, sys_swapoff)
+
+#define __NR_reboot				169
+__SYSCALL(__NR_reboot, sys_reboot)
+
+#define __NR_sethostname			170
+__SYSCALL(__NR_sethostname, sys_sethostname)
+#define __NR_setdomainname			171
+__SYSCALL(__NR_setdomainname, sys_setdomainname)
+
+#define __NR_iopl				172
+__SYSCALL(__NR_iopl, stub_iopl)
+#define __NR_ioperm				173
+__SYSCALL(__NR_ioperm, sys_ioperm)
+
+#define __NR_create_module			174
+__SYSCALL(__NR_create_module, sys_ni_syscall)
+#define __NR_init_module			175
+__SYSCALL(__NR_init_module, sys_init_module)
+#define __NR_delete_module			176
+__SYSCALL(__NR_delete_module, sys_delete_module)
+#define __NR_get_kernel_syms			177
+__SYSCALL(__NR_get_kernel_syms, sys_ni_syscall)
+#define __NR_query_module			178
+__SYSCALL(__NR_query_module, sys_ni_syscall)
+
+#define __NR_quotactl				179
+__SYSCALL(__NR_quotactl, sys_quotactl)
+
+#define __NR_nfsservctl				180
+__SYSCALL(__NR_nfsservctl, sys_nfsservctl)
+
+/* reserved for LiS/STREAMS */
+#define __NR_getpmsg				181
+__SYSCALL(__NR_getpmsg, sys_ni_syscall)
+#define __NR_putpmsg				182
+__SYSCALL(__NR_putpmsg, sys_ni_syscall)
+
+/* reserved for AFS */
+#define __NR_afs_syscall			183
+__SYSCALL(__NR_afs_syscall, sys_ni_syscall)
+
+/* reserved for tux */
+#define __NR_tuxcall				184
+__SYSCALL(__NR_tuxcall, sys_ni_syscall)
+
+#define __NR_security				185
+__SYSCALL(__NR_security, sys_ni_syscall)
+
+#define __NR_gettid				186
+__SYSCALL(__NR_gettid, sys_gettid)
+
+#define __NR_readahead				187
+__SYSCALL(__NR_readahead, sys_readahead)
+#define __NR_setxattr				188
+__SYSCALL(__NR_setxattr, sys_setxattr)
+#define __NR_lsetxattr				189
+__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
+#define __NR_fsetxattr				190
+__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
+#define __NR_getxattr				191
+__SYSCALL(__NR_getxattr, sys_getxattr)
+#define __NR_lgetxattr				192
+__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
+#define __NR_fgetxattr				193
+__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
+#define __NR_listxattr				194
+__SYSCALL(__NR_listxattr, sys_listxattr)
+#define __NR_llistxattr				195
+__SYSCALL(__NR_llistxattr, sys_llistxattr)
+#define __NR_flistxattr				196
+__SYSCALL(__NR_flistxattr, sys_flistxattr)
+#define __NR_removexattr			197
+__SYSCALL(__NR_removexattr, sys_removexattr)
+#define __NR_lremovexattr			198
+__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
+#define __NR_fremovexattr			199
+__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
+#define __NR_tkill				200
+__SYSCALL(__NR_tkill, sys_tkill)
+#define __NR_time				201
+__SYSCALL(__NR_time, sys_time)
+#define __NR_futex				202
+__SYSCALL(__NR_futex, sys_futex)
+#define __NR_sched_setaffinity			203
+__SYSCALL(__NR_sched_setaffinity, sys_sched_setaffinity)
+#define __NR_sched_getaffinity			204
+__SYSCALL(__NR_sched_getaffinity, sys_sched_getaffinity)
+#define __NR_set_thread_area			205
+__SYSCALL(__NR_set_thread_area, sys_ni_syscall)	/* use arch_prctl */
+#define __NR_io_setup				206
+__SYSCALL(__NR_io_setup, sys_io_setup)
+#define __NR_io_destroy				207
+__SYSCALL(__NR_io_destroy, sys_io_destroy)
+#define __NR_io_getevents			208
+__SYSCALL(__NR_io_getevents, sys_io_getevents)
+#define __NR_io_submit				209
+__SYSCALL(__NR_io_submit, sys_io_submit)
+#define __NR_io_cancel				210
+__SYSCALL(__NR_io_cancel, sys_io_cancel)
+#define __NR_get_thread_area			211
+__SYSCALL(__NR_get_thread_area, sys_ni_syscall)	/* use arch_prctl */
+#define __NR_lookup_dcookie			212
+__SYSCALL(__NR_lookup_dcookie, sys_lookup_dcookie)
+#define __NR_epoll_create			213
+__SYSCALL(__NR_epoll_create, sys_epoll_create)
+#define __NR_epoll_ctl_old			214
+__SYSCALL(__NR_epoll_ctl_old, sys_ni_syscall)
+#define __NR_epoll_wait_old			215
+__SYSCALL(__NR_epoll_wait_old, sys_ni_syscall)
+#define __NR_remap_file_pages			216
+__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
+#define __NR_getdents64				217
+__SYSCALL(__NR_getdents64, sys_getdents64)
+#define __NR_set_tid_address			218
+__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
+#define __NR_restart_syscall			219
+__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
+#define __NR_semtimedop				220
+__SYSCALL(__NR_semtimedop, sys_semtimedop)
+#define __NR_fadvise64				221
+__SYSCALL(__NR_fadvise64, sys_fadvise64)
+#define __NR_timer_create			222
+__SYSCALL(__NR_timer_create, sys_timer_create)
+#define __NR_timer_settime			223
+__SYSCALL(__NR_timer_settime, sys_timer_settime)
+#define __NR_timer_gettime			224
+__SYSCALL(__NR_timer_gettime, sys_timer_gettime)
+#define __NR_timer_getoverrun			225
+__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
+#define __NR_timer_delete			226
+__SYSCALL(__NR_timer_delete, sys_timer_delete)
+#define __NR_clock_settime			227
+__SYSCALL(__NR_clock_settime, sys_clock_settime)
+#define __NR_clock_gettime			228
+__SYSCALL(__NR_clock_gettime, sys_clock_gettime)
+#define __NR_clock_getres			229
+__SYSCALL(__NR_clock_getres, sys_clock_getres)
+#define __NR_clock_nanosleep			230
+__SYSCALL(__NR_clock_nanosleep, sys_clock_nanosleep)
+#define __NR_exit_group				231
+__SYSCALL(__NR_exit_group, sys_exit_group)
+#define __NR_epoll_wait				232
+__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
+#define __NR_epoll_ctl				233
+__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
+#define __NR_tgkill				234
+__SYSCALL(__NR_tgkill, sys_tgkill)
+#define __NR_utimes				235
+__SYSCALL(__NR_utimes, sys_utimes)
+#define __NR_vserver				236
+__SYSCALL(__NR_vserver, sys_ni_syscall)
+#define __NR_mbind				237
+__SYSCALL(__NR_mbind, sys_mbind)
+#define __NR_set_mempolicy			238
+__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
+#define __NR_get_mempolicy			239
+__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
+#define __NR_mq_open				240
+__SYSCALL(__NR_mq_open, sys_mq_open)
+#define __NR_mq_unlink				241
+__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
+#define __NR_mq_timedsend			242
+__SYSCALL(__NR_mq_timedsend, sys_mq_timedsend)
+#define __NR_mq_timedreceive			243
+__SYSCALL(__NR_mq_timedreceive, sys_mq_timedreceive)
+#define __NR_mq_notify				244
+__SYSCALL(__NR_mq_notify, sys_mq_notify)
+#define __NR_mq_getsetattr			245
+__SYSCALL(__NR_mq_getsetattr, sys_mq_getsetattr)
+#define __NR_kexec_load				246
+__SYSCALL(__NR_kexec_load, sys_kexec_load)
+#define __NR_waitid				247
+__SYSCALL(__NR_waitid, sys_waitid)
+#define __NR_add_key				248
+__SYSCALL(__NR_add_key, sys_add_key)
+#define __NR_request_key			249
+__SYSCALL(__NR_request_key, sys_request_key)
+#define __NR_keyctl				250
+__SYSCALL(__NR_keyctl, sys_keyctl)
+#define __NR_ioprio_set				251
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get				252
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
+#define __NR_inotify_init			253
+__SYSCALL(__NR_inotify_init, sys_inotify_init)
+#define __NR_inotify_add_watch			254
+__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
+#define __NR_inotify_rm_watch			255
+__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
+#define __NR_migrate_pages			256
+__SYSCALL(__NR_migrate_pages, sys_migrate_pages)
+#define __NR_openat				257
+__SYSCALL(__NR_openat, sys_openat)
+#define __NR_mkdirat				258
+__SYSCALL(__NR_mkdirat, sys_mkdirat)
+#define __NR_mknodat				259
+__SYSCALL(__NR_mknodat, sys_mknodat)
+#define __NR_fchownat				260
+__SYSCALL(__NR_fchownat, sys_fchownat)
+#define __NR_futimesat				261
+__SYSCALL(__NR_futimesat, sys_futimesat)
+#define __NR_newfstatat				262
+__SYSCALL(__NR_newfstatat, sys_newfstatat)
+#define __NR_unlinkat				263
+__SYSCALL(__NR_unlinkat, sys_unlinkat)
+#define __NR_renameat				264
+__SYSCALL(__NR_renameat, sys_renameat)
+#define __NR_linkat				265
+__SYSCALL(__NR_linkat, sys_linkat)
+#define __NR_symlinkat				266
+__SYSCALL(__NR_symlinkat, sys_symlinkat)
+#define __NR_readlinkat				267
+__SYSCALL(__NR_readlinkat, sys_readlinkat)
+#define __NR_fchmodat				268
+__SYSCALL(__NR_fchmodat, sys_fchmodat)
+#define __NR_faccessat				269
+__SYSCALL(__NR_faccessat, sys_faccessat)
+#define __NR_pselect6				270
+__SYSCALL(__NR_pselect6, sys_pselect6)
+#define __NR_ppoll				271
+__SYSCALL(__NR_ppoll,	sys_ppoll)
+#define __NR_unshare				272
+__SYSCALL(__NR_unshare,	sys_unshare)
+#define __NR_set_robust_list			273
+__SYSCALL(__NR_set_robust_list, sys_set_robust_list)
+#define __NR_get_robust_list			274
+__SYSCALL(__NR_get_robust_list, sys_get_robust_list)
+#define __NR_splice				275
+__SYSCALL(__NR_splice, sys_splice)
+#define __NR_tee				276
+__SYSCALL(__NR_tee, sys_tee)
+#define __NR_sync_file_range			277
+__SYSCALL(__NR_sync_file_range, sys_sync_file_range)
+#define __NR_vmsplice				278
+__SYSCALL(__NR_vmsplice, sys_vmsplice)
+#define __NR_move_pages				279
+__SYSCALL(__NR_move_pages, sys_move_pages)
+#define __NR_utimensat				280
+__SYSCALL(__NR_utimensat, sys_utimensat)
+#define __IGNORE_getcpu		/* implemented as a vsyscall */
+#define __NR_epoll_pwait			281
+__SYSCALL(__NR_epoll_pwait, sys_epoll_pwait)
+#define __NR_signalfd				282
+__SYSCALL(__NR_signalfd, sys_signalfd)
+#define __NR_timerfd_create			283
+__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
+#define __NR_eventfd				284
+__SYSCALL(__NR_eventfd, sys_eventfd)
+#define __NR_fallocate				285
+__SYSCALL(__NR_fallocate, sys_fallocate)
+#define __NR_timerfd_settime			286
+__SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
+#define __NR_timerfd_gettime			287
+__SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
+#define __NR_paccept				288
+__SYSCALL(__NR_paccept, sys_paccept)
+#define __NR_signalfd4				289
+__SYSCALL(__NR_signalfd4, sys_signalfd4)
+#define __NR_eventfd2				290
+__SYSCALL(__NR_eventfd2, sys_eventfd2)
+#define __NR_epoll_create1			291
+__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
+#define __NR_dup3				292
+__SYSCALL(__NR_dup3, sys_dup3)
+#define __NR_pipe2				293
+__SYSCALL(__NR_pipe2, sys_pipe2)
+#define __NR_inotify_init1			294
+__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
+
+
+#ifndef __NO_STUBS
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#endif	/* __NO_STUBS */
+
+#ifdef __KERNEL__
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif	/* __KERNEL__ */
+
+#endif /* _ASM_X86_UNISTD_64_H */
diff --git a/arch/x86/include/asm/unwind.h b/arch/x86/include/asm/unwind.h
new file mode 100644
index 0000000..8b064bd
--- /dev/null
+++ b/arch/x86/include/asm/unwind.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_X86_UNWIND_H
+#define _ASM_X86_UNWIND_H
+
+#define UNW_PC(frame) ((void)(frame), 0UL)
+#define UNW_SP(frame) ((void)(frame), 0UL)
+#define UNW_FP(frame) ((void)(frame), 0UL)
+
+static inline int arch_unw_user_mode(const void *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_X86_UNWIND_H */
diff --git a/arch/x86/include/asm/user.h b/arch/x86/include/asm/user.h
new file mode 100644
index 0000000..999873b
--- /dev/null
+++ b/arch/x86/include/asm/user.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "user_32.h"
+#else
+# include "user_64.h"
+#endif
diff --git a/arch/x86/include/asm/user32.h b/arch/x86/include/asm/user32.h
new file mode 100644
index 0000000..14cbb73
--- /dev/null
+++ b/arch/x86/include/asm/user32.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_X86_USER32_H
+#define _ASM_X86_USER32_H
+
+/* IA32 compatible user structures for ptrace.
+ * These should be used for 32bit coredumps too. */
+
+struct user_i387_ia32_struct {
+	u32	cwd;
+	u32	swd;
+	u32	twd;
+	u32	fip;
+	u32	fcs;
+	u32	foo;
+	u32	fos;
+	u32	st_space[20];   /* 8*10 bytes for each FP-reg = 80 bytes */
+};
+
+/* FSAVE frame with extensions */
+struct user32_fxsr_struct {
+	unsigned short	cwd;
+	unsigned short	swd;
+	unsigned short	twd;	/* not compatible to 64bit twd */
+	unsigned short	fop;
+	int	fip;
+	int	fcs;
+	int	foo;
+	int	fos;
+	int	mxcsr;
+	int	reserved;
+	int	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	int	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
+	int	padding[56];
+};
+
+struct user_regs_struct32 {
+	__u32 ebx, ecx, edx, esi, edi, ebp, eax;
+	unsigned short ds, __ds, es, __es;
+	unsigned short fs, __fs, gs, __gs;
+	__u32 orig_eax, eip;
+	unsigned short cs, __cs;
+	__u32 eflags, esp;
+	unsigned short ss, __ss;
+};
+
+struct user32 {
+  struct user_regs_struct32 regs; /* Where the registers are actually stored */
+  int u_fpvalid;		/* True if math co-processor being used. */
+				/* for this mess. Not yet used. */
+  struct user_i387_ia32_struct i387;	/* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  __u32 u_tsize;	/* Text segment size (pages). */
+  __u32 u_dsize;	/* Data segment size (pages). */
+  __u32 u_ssize;	/* Stack segment size (pages). */
+  __u32 start_code;     /* Starting virtual address of text. */
+  __u32 start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  __u32 signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No __u32er used */
+  __u32 u_ar0;	/* Used by gdb to help find the values for */
+				/* the registers. */
+  __u32 u_fpstate;	/* Math Co-processor pointer. */
+  __u32 magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  int u_debugreg[8];
+};
+
+
+#endif /* _ASM_X86_USER32_H */
diff --git a/arch/x86/include/asm/user_32.h b/arch/x86/include/asm/user_32.h
new file mode 100644
index 0000000..bebfd86
--- /dev/null
+++ b/arch/x86/include/asm/user_32.h
@@ -0,0 +1,131 @@
+#ifndef _ASM_X86_USER_32_H
+#define _ASM_X86_USER_32_H
+
+#include <asm/page.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+/*
+ * Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
+ * interacting with the FXSR-format floating point environment.  Floating
+ * point data can be accessed in the regular format in the usual manner,
+ * and both the standard and SIMD floating point data can be accessed via
+ * the new ptrace requests.  In either case, changes to the FPU environment
+ * will be reflected in the task's state as expected.
+ */
+
+struct user_i387_struct {
+	long	cwd;
+	long	swd;
+	long	twd;
+	long	fip;
+	long	fcs;
+	long	foo;
+	long	fos;
+	long	st_space[20];	/* 8*10 bytes for each FP-reg = 80 bytes */
+};
+
+struct user_fxsr_struct {
+	unsigned short	cwd;
+	unsigned short	swd;
+	unsigned short	twd;
+	unsigned short	fop;
+	long	fip;
+	long	fcs;
+	long	foo;
+	long	fos;
+	long	mxcsr;
+	long	reserved;
+	long	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	long	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
+	long	padding[56];
+};
+
+/*
+ * This is the old layout of "struct pt_regs", and
+ * is still the layout used by user mode (the new
+ * pt_regs doesn't have all registers as the kernel
+ * doesn't use the extra segment registers)
+ */
+struct user_regs_struct {
+	unsigned long	bx;
+	unsigned long	cx;
+	unsigned long	dx;
+	unsigned long	si;
+	unsigned long	di;
+	unsigned long	bp;
+	unsigned long	ax;
+	unsigned long	ds;
+	unsigned long	es;
+	unsigned long	fs;
+	unsigned long	gs;
+	unsigned long	orig_ax;
+	unsigned long	ip;
+	unsigned long	cs;
+	unsigned long	flags;
+	unsigned long	sp;
+	unsigned long	ss;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;	/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+				/* for this mess. Not yet used. */
+  struct user_i387_struct i387;	/* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  unsigned long u_ar0;		/* Used by gdb to help find the values for */
+				/* the registers. */
+  struct user_i387_struct *u_fpstate;	/* Math Co-processor pointer. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  int u_debugreg[8];
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_X86_USER_32_H */
diff --git a/arch/x86/include/asm/user_64.h b/arch/x86/include/asm/user_64.h
new file mode 100644
index 0000000..faf2cd3
--- /dev/null
+++ b/arch/x86/include/asm/user_64.h
@@ -0,0 +1,137 @@
+#ifndef _ASM_X86_USER_64_H
+#define _ASM_X86_USER_64_H
+
+#include <asm/types.h>
+#include <asm/page.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user.
+   There are quite a number of obstacles to being able to view the
+   contents of the floating point registers, and until these are
+   solved you will not be able to view the contents of them.
+   Actually, you can read in the core file and look at the contents of
+   the user struct to find out what the floating point registers
+   contain.
+
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.  */
+
+/*
+ * Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
+ * interacting with the FXSR-format floating point environment.  Floating
+ * point data can be accessed in the regular format in the usual manner,
+ * and both the standard and SIMD floating point data can be accessed via
+ * the new ptrace requests.  In either case, changes to the FPU environment
+ * will be reflected in the task's state as expected.
+ *
+ * x86-64 support by Andi Kleen.
+ */
+
+/* This matches the 64bit FXSAVE format as defined by AMD. It is the same
+   as the 32bit format defined by Intel, except that the selector:offset pairs
+   for data and eip are replaced with flat 64bit pointers. */
+struct user_i387_struct {
+	unsigned short	cwd;
+	unsigned short	swd;
+	unsigned short	twd;	/* Note this is not the same as
+				   the 32bit/x87/FSAVE twd */
+	unsigned short	fop;
+	__u64	rip;
+	__u64	rdp;
+	__u32	mxcsr;
+	__u32	mxcsr_mask;
+	__u32	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	__u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg = 256 bytes */
+	__u32	padding[24];
+};
+
+/*
+ * Segment register layout in coredumps.
+ */
+struct user_regs_struct {
+	unsigned long	r15;
+	unsigned long	r14;
+	unsigned long	r13;
+	unsigned long	r12;
+	unsigned long	bp;
+	unsigned long	bx;
+	unsigned long	r11;
+	unsigned long	r10;
+	unsigned long	r9;
+	unsigned long	r8;
+	unsigned long	ax;
+	unsigned long	cx;
+	unsigned long	dx;
+	unsigned long	si;
+	unsigned long	di;
+	unsigned long	orig_ax;
+	unsigned long	ip;
+	unsigned long	cs;
+	unsigned long	flags;
+	unsigned long	sp;
+	unsigned long	ss;
+	unsigned long	fs_base;
+	unsigned long	gs_base;
+	unsigned long	ds;
+	unsigned long	es;
+	unsigned long	fs;
+	unsigned long	gs;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+
+struct user {
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;	/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+				/* for this mess. Not yet used. */
+  int pad0;
+  struct user_i387_struct i387;	/* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  int pad1;
+  unsigned long u_ar0;		/* Used by gdb to help find the values for */
+				/* the registers. */
+  struct user_i387_struct *u_fpstate;	/* Math Co-processor pointer. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  unsigned long u_debugreg[8];
+  unsigned long error_code; /* CPU error code or 0 */
+  unsigned long fault_address; /* CR3 or 0 */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_X86_USER_64_H */
diff --git a/arch/x86/include/asm/uv/bios.h b/arch/x86/include/asm/uv/bios.h
new file mode 100644
index 0000000..d931d3b
--- /dev/null
+++ b/arch/x86/include/asm/uv/bios.h
@@ -0,0 +1,94 @@
+#ifndef _ASM_X86_UV_BIOS_H
+#define _ASM_X86_UV_BIOS_H
+
+/*
+ * UV BIOS layer definitions.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *  Copyright (c) Russ Anderson
+ */
+
+#include <linux/rtc.h>
+
+/*
+ * Values for the BIOS calls.  It is passed as the first * argument in the
+ * BIOS call.  Passing any other value in the first argument will result
+ * in a BIOS_STATUS_UNIMPLEMENTED return status.
+ */
+enum uv_bios_cmd {
+	UV_BIOS_COMMON,
+	UV_BIOS_GET_SN_INFO,
+	UV_BIOS_FREQ_BASE
+};
+
+/*
+ * Status values returned from a BIOS call.
+ */
+enum {
+	BIOS_STATUS_SUCCESS		=  0,
+	BIOS_STATUS_UNIMPLEMENTED	= -ENOSYS,
+	BIOS_STATUS_EINVAL		= -EINVAL,
+	BIOS_STATUS_UNAVAIL		= -EBUSY
+};
+
+/*
+ * The UV system table describes specific firmware
+ * capabilities available to the Linux kernel at runtime.
+ */
+struct uv_systab {
+	char signature[4];	/* must be "UVST" */
+	u32 revision;		/* distinguish different firmware revs */
+	u64 function;		/* BIOS runtime callback function ptr */
+};
+
+enum {
+	BIOS_FREQ_BASE_PLATFORM = 0,
+	BIOS_FREQ_BASE_INTERVAL_TIMER = 1,
+	BIOS_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+union partition_info_u {
+	u64	val;
+	struct {
+		u64	hub_version	:  8,
+			partition_id	: 16,
+			coherence_id	: 16,
+			region_size	: 24;
+	};
+};
+
+/*
+ * bios calls have 6 parameters
+ */
+extern s64 uv_bios_call(enum uv_bios_cmd, u64, u64, u64, u64, u64);
+extern s64 uv_bios_call_irqsave(enum uv_bios_cmd, u64, u64, u64, u64, u64);
+extern s64 uv_bios_call_reentrant(enum uv_bios_cmd, u64, u64, u64, u64, u64);
+
+extern s64 uv_bios_get_sn_info(int, int *, long *, long *, long *);
+extern s64 uv_bios_freq_base(u64, u64 *);
+
+extern void uv_bios_init(void);
+
+extern int uv_type;
+extern long sn_partition_id;
+extern long uv_coherency_id;
+extern long uv_region_size;
+#define partition_coherence_id()	(uv_coherency_id)
+
+extern struct kobject *sgi_uv_kobj;	/* /sys/firmware/sgi_uv */
+
+#endif /* _ASM_X86_UV_BIOS_H */
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
new file mode 100644
index 0000000..e236325
--- /dev/null
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -0,0 +1,332 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV Broadcast Assist Unit definitions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_X86_UV_UV_BAU_H
+#define _ASM_X86_UV_UV_BAU_H
+
+#include <linux/bitmap.h>
+#define BITSPERBYTE 8
+
+/*
+ * Broadcast Assist Unit messaging structures
+ *
+ * Selective Broadcast activations are induced by software action
+ * specifying a particular 8-descriptor "set" via a 6-bit index written
+ * to an MMR.
+ * Thus there are 64 unique 512-byte sets of SB descriptors - one set for
+ * each 6-bit index value. These descriptor sets are mapped in sequence
+ * starting with set 0 located at the address specified in the
+ * BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512,
+ * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
+ *
+ * We will use 31 sets, one for sending BAU messages from each of the 32
+ * cpu's on the node.
+ *
+ * TLB shootdown will use the first of the 8 descriptors of each set.
+ * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
+ */
+
+#define UV_ITEMS_PER_DESCRIPTOR		8
+#define UV_CPUS_PER_ACT_STATUS		32
+#define UV_ACT_STATUS_MASK		0x3
+#define UV_ACT_STATUS_SIZE		2
+#define UV_ACTIVATION_DESCRIPTOR_SIZE	32
+#define UV_DISTRIBUTION_SIZE		256
+#define UV_SW_ACK_NPENDING		8
+#define UV_NET_ENDPOINT_INTD		0x38
+#define UV_DESC_BASE_PNODE_SHIFT	49
+#define UV_PAYLOADQ_PNODE_SHIFT		49
+#define UV_PTC_BASENAME			"sgi_uv/ptc_statistics"
+#define uv_physnodeaddr(x)		((__pa((unsigned long)(x)) & uv_mmask))
+
+/*
+ * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
+ */
+#define DESC_STATUS_IDLE		0
+#define DESC_STATUS_ACTIVE		1
+#define DESC_STATUS_DESTINATION_TIMEOUT	2
+#define DESC_STATUS_SOURCE_TIMEOUT	3
+
+/*
+ * source side threshholds at which message retries print a warning
+ */
+#define SOURCE_TIMEOUT_LIMIT		20
+#define DESTINATION_TIMEOUT_LIMIT	20
+
+/*
+ * number of entries in the destination side payload queue
+ */
+#define DEST_Q_SIZE			17
+/*
+ * number of destination side software ack resources
+ */
+#define DEST_NUM_RESOURCES		8
+#define MAX_CPUS_PER_NODE		32
+/*
+ * completion statuses for sending a TLB flush message
+ */
+#define	FLUSH_RETRY			1
+#define	FLUSH_GIVEUP			2
+#define	FLUSH_COMPLETE			3
+
+/*
+ * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
+ * If the 'multilevel' flag in the header portion of the descriptor
+ * has been set to 0, then endpoint multi-unicast mode is selected.
+ * The distribution specification (32 bytes) is interpreted as a 256-bit
+ * distribution vector. Adjacent bits correspond to consecutive even numbered
+ * nodeIDs. The result of adding the index of a given bit to the 15-bit
+ * 'base_dest_nodeid' field of the header corresponds to the
+ * destination nodeID associated with that specified bit.
+ */
+struct bau_target_nodemask {
+	unsigned long bits[BITS_TO_LONGS(256)];
+};
+
+/*
+ * mask of cpu's on a node
+ * (during initialization we need to check that unsigned long has
+ *  enough bits for max. cpu's per node)
+ */
+struct bau_local_cpumask {
+	unsigned long bits;
+};
+
+/*
+ * Payload: 16 bytes (128 bits) (bytes 0x20-0x2f of descriptor)
+ * only 12 bytes (96 bits) of the payload area are usable.
+ * An additional 3 bytes (bits 27:4) of the header address are carried
+ * to the next bytes of the destination payload queue.
+ * And an additional 2 bytes of the header Suppl_A field are also
+ * carried to the destination payload queue.
+ * But the first byte of the Suppl_A becomes bits 127:120 (the 16th byte)
+ * of the destination payload queue, which is written by the hardware
+ * with the s/w ack resource bit vector.
+ * [ effective message contents (16 bytes (128 bits) maximum), not counting
+ *   the s/w ack bit vector  ]
+ */
+
+/*
+ * The payload is software-defined for INTD transactions
+ */
+struct bau_msg_payload {
+	unsigned long address;		/* signifies a page or all TLB's
+						of the cpu */
+	/* 64 bits */
+	unsigned short sending_cpu;	/* filled in by sender */
+	/* 16 bits */
+	unsigned short acknowledge_count;/* filled in by destination */
+	/* 16 bits */
+	unsigned int reserved1:32;	/* not usable */
+};
+
+
+/*
+ * Message header:  16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
+ * see table 4.2.3.0.1 in broacast_assist spec.
+ */
+struct bau_msg_header {
+	int dest_subnodeid:6;	/* must be zero */
+	/* bits 5:0 */
+	int base_dest_nodeid:15; /* nasid>>1 (pnode) of first bit in node_map */
+	/* bits 20:6 */
+	int command:8;		/* message type */
+	/* bits 28:21 */
+				/* 0x38: SN3net EndPoint Message */
+	int rsvd_1:3;		/* must be zero */
+	/* bits 31:29 */
+				/* int will align on 32 bits */
+	int rsvd_2:9;		/* must be zero */
+	/* bits 40:32 */
+				/* Suppl_A is 56-41 */
+	int payload_2a:8;	/* becomes byte 16 of msg */
+	/* bits 48:41 */	/* not currently using */
+	int payload_2b:8;	/* becomes byte 17 of msg */
+	/* bits 56:49 */	/* not currently using */
+				/* Address field (96:57) is never used as an
+				   address (these are address bits 42:3) */
+	int rsvd_3:1;		/* must be zero */
+	/* bit 57 */
+				/* address bits 27:4 are payload */
+				/* these 24 bits become bytes 12-14 of msg */
+	int replied_to:1;	/* sent as 0 by the source to byte 12 */
+	/* bit 58 */
+
+	int payload_1a:5;	/* not currently used */
+	/* bits 63:59 */
+	int payload_1b:8;	/* not currently used */
+	/* bits 71:64 */
+	int payload_1c:8;	/* not currently used */
+	/* bits 79:72 */
+	int payload_1d:2;	/* not currently used */
+	/* bits 81:80 */
+
+	int rsvd_4:7;		/* must be zero */
+	/* bits 88:82 */
+	int sw_ack_flag:1;	/* software acknowledge flag */
+	/* bit 89 */
+				/* INTD trasactions at destination are to
+				   wait for software acknowledge */
+	int rsvd_5:6;		/* must be zero */
+	/* bits 95:90 */
+	int rsvd_6:5;		/* must be zero */
+	/* bits 100:96 */
+	int int_both:1;		/* if 1, interrupt both sockets on the blade */
+	/* bit 101*/
+	int fairness:3;		/* usually zero */
+	/* bits 104:102 */
+	int multilevel:1;	/* multi-level multicast format */
+	/* bit 105 */
+				/* 0 for TLB: endpoint multi-unicast messages */
+	int chaining:1;		/* next descriptor is part of this activation*/
+	/* bit 106 */
+	int rsvd_7:21;		/* must be zero */
+	/* bits 127:107 */
+};
+
+/*
+ * The activation descriptor:
+ * The format of the message to send, plus all accompanying control
+ * Should be 64 bytes
+ */
+struct bau_desc {
+	struct bau_target_nodemask distribution;
+	/*
+	 * message template, consisting of header and payload:
+	 */
+	struct bau_msg_header header;
+	struct bau_msg_payload payload;
+};
+/*
+ *   -payload--    ---------header------
+ *   bytes 0-11    bits 41-56  bits 58-81
+ *       A           B  (2)      C (3)
+ *
+ *            A/B/C are moved to:
+ *       A            C          B
+ *   bytes 0-11  bytes 12-14  bytes 16-17  (byte 15 filled in by hw as vector)
+ *   ------------payload queue-----------
+ */
+
+/*
+ * The payload queue on the destination side is an array of these.
+ * With BAU_MISC_CONTROL set for software acknowledge mode, the messages
+ * are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17
+ * bytes of usable data, including the sw ack vector in byte 15 (bits 127:120)
+ * (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from
+ *  sw_ack_vector and payload_2)
+ * "Enabling Software Acknowledgment mode (see Section 4.3.3 Software
+ *  Acknowledge Processing) also selects 32 byte (17 bytes usable) payload
+ *  operation."
+ */
+struct bau_payload_queue_entry {
+	unsigned long address;		/* signifies a page or all TLB's
+						of the cpu */
+	/* 64 bits, bytes 0-7 */
+
+	unsigned short sending_cpu;	/* cpu that sent the message */
+	/* 16 bits, bytes 8-9 */
+
+	unsigned short acknowledge_count; /* filled in by destination */
+	/* 16 bits, bytes 10-11 */
+
+	unsigned short replied_to:1;	/* sent as 0 by the source */
+	/* 1 bit */
+	unsigned short unused1:7;       /* not currently using */
+	/* 7 bits: byte 12) */
+
+	unsigned char unused2[2];	/* not currently using */
+	/* bytes 13-14 */
+
+	unsigned char sw_ack_vector;	/* filled in by the hardware */
+	/* byte 15 (bits 127:120) */
+
+	unsigned char unused4[3];	/* not currently using bytes 17-19 */
+	/* bytes 17-19 */
+
+	int number_of_cpus;		/* filled in at destination */
+	/* 32 bits, bytes 20-23 (aligned) */
+
+	unsigned char unused5[8];       /* not using */
+	/* bytes 24-31 */
+};
+
+/*
+ * one for every slot in the destination payload queue
+ */
+struct bau_msg_status {
+	struct bau_local_cpumask seen_by;	/* map of cpu's */
+};
+
+/*
+ * one for every slot in the destination software ack resources
+ */
+struct bau_sw_ack_status {
+	struct bau_payload_queue_entry *msg;	/* associated message */
+	int watcher;				/* cpu monitoring, or -1 */
+};
+
+/*
+ * one on every node and per-cpu; to locate the software tables
+ */
+struct bau_control {
+	struct bau_desc *descriptor_base;
+	struct bau_payload_queue_entry *bau_msg_head;
+	struct bau_payload_queue_entry *va_queue_first;
+	struct bau_payload_queue_entry *va_queue_last;
+	struct bau_msg_status *msg_statuses;
+	int *watching; /* pointer to array */
+};
+
+/*
+ * This structure is allocated per_cpu for UV TLB shootdown statistics.
+ */
+struct ptc_stats {
+	unsigned long ptc_i;	/* number of IPI-style flushes */
+	unsigned long requestor;	/* number of nodes this cpu sent to */
+	unsigned long requestee;	/* times cpu was remotely requested */
+	unsigned long alltlb;	/* times all tlb's on this cpu were flushed */
+	unsigned long onetlb;	/* times just one tlb on this cpu was flushed */
+	unsigned long s_retry;	/* retries on source side timeouts */
+	unsigned long d_retry;	/* retries on destination side timeouts */
+	unsigned long sflush;	/* cycles spent in uv_flush_tlb_others */
+	unsigned long dflush;	/* cycles spent on destination side */
+	unsigned long retriesok; /* successes on retries */
+	unsigned long nomsg;	/* interrupts with no message */
+	unsigned long multmsg;	/* interrupts with multiple messages */
+	unsigned long ntargeted;/* nodes targeted */
+};
+
+static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp)
+{
+	return constant_test_bit(node, &dstp->bits[0]);
+}
+static inline void bau_node_set(int node, struct bau_target_nodemask *dstp)
+{
+	__set_bit(node, &dstp->bits[0]);
+}
+static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits)
+{
+	bitmap_zero(&dstp->bits[0], nbits);
+}
+
+static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
+{
+	bitmap_zero(&dstp->bits, nbits);
+}
+
+#define cpubit_isset(cpu, bau_local_cpumask) \
+	test_bit((cpu), (bau_local_cpumask).bits)
+
+extern int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long);
+extern void uv_bau_message_intr1(void);
+extern void uv_bau_timeout_intr1(void);
+
+#endif /* _ASM_X86_UV_UV_BAU_H */
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
new file mode 100644
index 0000000..c6ad93e
--- /dev/null
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -0,0 +1,354 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV architectural definitions
+ *
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_X86_UV_UV_HUB_H
+#define _ASM_X86_UV_UV_HUB_H
+
+#include <linux/numa.h>
+#include <linux/percpu.h>
+#include <asm/types.h>
+#include <asm/percpu.h>
+
+
+/*
+ * Addressing Terminology
+ *
+ *	M       - The low M bits of a physical address represent the offset
+ *		  into the blade local memory. RAM memory on a blade is physically
+ *		  contiguous (although various IO spaces may punch holes in
+ *		  it)..
+ *
+ * 	N	- Number of bits in the node portion of a socket physical
+ * 		  address.
+ *
+ * 	NASID   - network ID of a router, Mbrick or Cbrick. Nasid values of
+ * 	 	  routers always have low bit of 1, C/MBricks have low bit
+ * 		  equal to 0. Most addressing macros that target UV hub chips
+ * 		  right shift the NASID by 1 to exclude the always-zero bit.
+ * 		  NASIDs contain up to 15 bits.
+ *
+ *	GNODE   - NASID right shifted by 1 bit. Most mmrs contain gnodes instead
+ *		  of nasids.
+ *
+ * 	PNODE   - the low N bits of the GNODE. The PNODE is the most useful variant
+ * 		  of the nasid for socket usage.
+ *
+ *
+ *  NumaLink Global Physical Address Format:
+ *  +--------------------------------+---------------------+
+ *  |00..000|      GNODE             |      NodeOffset     |
+ *  +--------------------------------+---------------------+
+ *          |<-------53 - M bits --->|<--------M bits ----->
+ *
+ *	M - number of node offset bits (35 .. 40)
+ *
+ *
+ *  Memory/UV-HUB Processor Socket Address Format:
+ *  +----------------+---------------+---------------------+
+ *  |00..000000000000|   PNODE       |      NodeOffset     |
+ *  +----------------+---------------+---------------------+
+ *                   <--- N bits --->|<--------M bits ----->
+ *
+ *	M - number of node offset bits (35 .. 40)
+ *	N - number of PNODE bits (0 .. 10)
+ *
+ *		Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64).
+ *		The actual values are configuration dependent and are set at
+ *		boot time. M & N values are set by the hardware/BIOS at boot.
+ *
+ *
+ * APICID format
+ * 	NOTE!!!!!! This is the current format of the APICID. However, code
+ * 	should assume that this will change in the future. Use functions
+ * 	in this file for all APICID bit manipulations and conversion.
+ *
+ * 		1111110000000000
+ * 		5432109876543210
+ *		pppppppppplc0cch
+ *		sssssssssss
+ *
+ *			p  = pnode bits
+ *			l =  socket number on board
+ *			c  = core
+ *			h  = hyperthread
+ *			s  = bits that are in the SOCKET_ID CSR
+ *
+ *	Note: Processor only supports 12 bits in the APICID register. The ACPI
+ *	      tables hold all 16 bits. Software needs to be aware of this.
+ *
+ * 	      Unless otherwise specified, all references to APICID refer to
+ * 	      the FULL value contained in ACPI tables, not the subset in the
+ * 	      processor APICID register.
+ */
+
+
+/*
+ * Maximum number of bricks in all partitions and in all coherency domains.
+ * This is the total number of bricks accessible in the numalink fabric. It
+ * includes all C & M bricks. Routers are NOT included.
+ *
+ * This value is also the value of the maximum number of non-router NASIDs
+ * in the numalink fabric.
+ *
+ * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused.
+ */
+#define UV_MAX_NUMALINK_BLADES	16384
+
+/*
+ * Maximum number of C/Mbricks within a software SSI (hardware may support
+ * more).
+ */
+#define UV_MAX_SSI_BLADES	256
+
+/*
+ * The largest possible NASID of a C or M brick (+ 2)
+ */
+#define UV_MAX_NASID_VALUE	(UV_MAX_NUMALINK_NODES * 2)
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced and are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct uv_hub_info_s {
+	unsigned long	global_mmr_base;
+	unsigned long	gpa_mask;
+	unsigned long	gnode_upper;
+	unsigned long	lowmem_remap_top;
+	unsigned long	lowmem_remap_base;
+	unsigned short	pnode;
+	unsigned short	pnode_mask;
+	unsigned short	coherency_domain_number;
+	unsigned short	numa_blade_id;
+	unsigned char	blade_processor_id;
+	unsigned char	m_val;
+	unsigned char	n_val;
+};
+DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+#define uv_hub_info 		(&__get_cpu_var(__uv_hub_info))
+#define uv_cpu_hub_info(cpu)	(&per_cpu(__uv_hub_info, cpu))
+
+/*
+ * Local & Global MMR space macros.
+ * 	Note: macros are intended to be used ONLY by inline functions
+ * 	in this file - not by other kernel code.
+ * 		n -  NASID (full 15-bit global nasid)
+ * 		g -  GNODE (full 15-bit global nasid, right shifted 1)
+ * 		p -  PNODE (local part of nsids, right shifted 1)
+ */
+#define UV_NASID_TO_PNODE(n)		(((n) >> 1) & uv_hub_info->pnode_mask)
+#define UV_PNODE_TO_NASID(p)		(((p) << 1) | uv_hub_info->gnode_upper)
+
+#define UV_LOCAL_MMR_BASE		0xf4000000UL
+#define UV_GLOBAL_MMR32_BASE		0xf8000000UL
+#define UV_GLOBAL_MMR64_BASE		(uv_hub_info->global_mmr_base)
+#define UV_LOCAL_MMR_SIZE		(64UL * 1024 * 1024)
+#define UV_GLOBAL_MMR32_SIZE		(64UL * 1024 * 1024)
+
+#define UV_GLOBAL_MMR32_PNODE_SHIFT	15
+#define UV_GLOBAL_MMR64_PNODE_SHIFT	26
+
+#define UV_GLOBAL_MMR32_PNODE_BITS(p)	((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
+
+#define UV_GLOBAL_MMR64_PNODE_BITS(p)					\
+	((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+
+#define UV_APIC_PNODE_SHIFT	6
+
+/*
+ * Macros for converting between kernel virtual addresses, socket local physical
+ * addresses, and UV global physical addresses.
+ * 	Note: use the standard __pa() & __va() macros for converting
+ * 	      between socket virtual and socket physical addresses.
+ */
+
+/* socket phys RAM --> UV global physical address */
+static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr)
+{
+	if (paddr < uv_hub_info->lowmem_remap_top)
+		paddr += uv_hub_info->lowmem_remap_base;
+	return paddr | uv_hub_info->gnode_upper;
+}
+
+
+/* socket virtual --> UV global physical address */
+static inline unsigned long uv_gpa(void *v)
+{
+	return __pa(v) | uv_hub_info->gnode_upper;
+}
+
+/* socket virtual --> UV global physical address */
+static inline void *uv_vgpa(void *v)
+{
+	return (void *)uv_gpa(v);
+}
+
+/* UV global physical address --> socket virtual */
+static inline void *uv_va(unsigned long gpa)
+{
+	return __va(gpa & uv_hub_info->gpa_mask);
+}
+
+/* pnode, offset --> socket virtual */
+static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
+{
+	return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset);
+}
+
+
+/*
+ * Extract a PNODE from an APICID (full apicid, not processor subset)
+ */
+static inline int uv_apicid_to_pnode(int apicid)
+{
+	return (apicid >> UV_APIC_PNODE_SHIFT);
+}
+
+/*
+ * Access global MMRs using the low memory MMR32 space. This region supports
+ * faster MMR access but not all MMRs are accessible in this space.
+ */
+static inline unsigned long *uv_global_mmr32_address(int pnode,
+				unsigned long offset)
+{
+	return __va(UV_GLOBAL_MMR32_BASE |
+		       UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset);
+}
+
+static inline void uv_write_global_mmr32(int pnode, unsigned long offset,
+				 unsigned long val)
+{
+	*uv_global_mmr32_address(pnode, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr32(int pnode,
+						 unsigned long offset)
+{
+	return *uv_global_mmr32_address(pnode, offset);
+}
+
+/*
+ * Access Global MMR space using the MMR space located at the top of physical
+ * memory.
+ */
+static inline unsigned long *uv_global_mmr64_address(int pnode,
+				unsigned long offset)
+{
+	return __va(UV_GLOBAL_MMR64_BASE |
+		    UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset);
+}
+
+static inline void uv_write_global_mmr64(int pnode, unsigned long offset,
+				unsigned long val)
+{
+	*uv_global_mmr64_address(pnode, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr64(int pnode,
+						 unsigned long offset)
+{
+	return *uv_global_mmr64_address(pnode, offset);
+}
+
+/*
+ * Access hub local MMRs. Faster than using global space but only local MMRs
+ * are accessible.
+ */
+static inline unsigned long *uv_local_mmr_address(unsigned long offset)
+{
+	return __va(UV_LOCAL_MMR_BASE | offset);
+}
+
+static inline unsigned long uv_read_local_mmr(unsigned long offset)
+{
+	return *uv_local_mmr_address(offset);
+}
+
+static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
+{
+	*uv_local_mmr_address(offset) = val;
+}
+
+/*
+ * Structures and definitions for converting between cpu, node, pnode, and blade
+ * numbers.
+ */
+struct uv_blade_info {
+	unsigned short	nr_possible_cpus;
+	unsigned short	nr_online_cpus;
+	unsigned short	pnode;
+};
+extern struct uv_blade_info *uv_blade_info;
+extern short *uv_node_to_blade;
+extern short *uv_cpu_to_blade;
+extern short uv_possible_blades;
+
+/* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */
+static inline int uv_blade_processor_id(void)
+{
+	return uv_hub_info->blade_processor_id;
+}
+
+/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */
+static inline int uv_numa_blade_id(void)
+{
+	return uv_hub_info->numa_blade_id;
+}
+
+/* Convert a cpu number to the the UV blade number */
+static inline int uv_cpu_to_blade_id(int cpu)
+{
+	return uv_cpu_to_blade[cpu];
+}
+
+/* Convert linux node number to the UV blade number */
+static inline int uv_node_to_blade_id(int nid)
+{
+	return uv_node_to_blade[nid];
+}
+
+/* Convert a blade id to the PNODE of the blade */
+static inline int uv_blade_to_pnode(int bid)
+{
+	return uv_blade_info[bid].pnode;
+}
+
+/* Determine the number of possible cpus on a blade */
+static inline int uv_blade_nr_possible_cpus(int bid)
+{
+	return uv_blade_info[bid].nr_possible_cpus;
+}
+
+/* Determine the number of online cpus on a blade */
+static inline int uv_blade_nr_online_cpus(int bid)
+{
+	return uv_blade_info[bid].nr_online_cpus;
+}
+
+/* Convert a cpu id to the PNODE of the blade containing the cpu */
+static inline int uv_cpu_to_pnode(int cpu)
+{
+	return uv_blade_info[uv_cpu_to_blade_id(cpu)].pnode;
+}
+
+/* Convert a linux node number to the PNODE of the blade */
+static inline int uv_node_to_pnode(int nid)
+{
+	return uv_blade_info[uv_node_to_blade_id(nid)].pnode;
+}
+
+/* Maximum possible number of blades */
+static inline int uv_num_possible_blades(void)
+{
+	return uv_possible_blades;
+}
+
+#endif /* _ASM_X86_UV_UV_HUB_H */
+
diff --git a/arch/x86/include/asm/uv/uv_irq.h b/arch/x86/include/asm/uv/uv_irq.h
new file mode 100644
index 0000000..9613c8c
--- /dev/null
+++ b/arch/x86/include/asm/uv/uv_irq.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV IRQ definitions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_X86_UV_UV_IRQ_H
+#define _ASM_X86_UV_UV_IRQ_H
+
+/* If a generic version of this structure gets defined, eliminate this one. */
+struct uv_IO_APIC_route_entry {
+	__u64	vector		:  8,
+		delivery_mode	:  3,
+		dest_mode	:  1,
+		delivery_status	:  1,
+		polarity	:  1,
+		__reserved_1	:  1,
+		trigger		:  1,
+		mask		:  1,
+		__reserved_2	: 15,
+		dest		: 32;
+};
+
+extern struct irq_chip uv_irq_chip;
+
+extern int arch_enable_uv_irq(char *, unsigned int, int, int, unsigned long);
+extern void arch_disable_uv_irq(int, unsigned long);
+
+extern int uv_setup_irq(char *, int, int, unsigned long);
+extern void uv_teardown_irq(unsigned int, int, unsigned long);
+
+#endif /* _ASM_X86_UV_UV_IRQ_H */
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
new file mode 100644
index 0000000..dd62779
--- /dev/null
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -0,0 +1,1295 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV MMR definitions
+ *
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_X86_UV_UV_MMRS_H
+#define _ASM_X86_UV_UV_MMRS_H
+
+#define UV_MMR_ENABLE		(1UL << 63)
+
+/* ========================================================================= */
+/*                           UVH_BAU_DATA_CONFIG                             */
+/* ========================================================================= */
+#define UVH_BAU_DATA_CONFIG 0x61680UL
+#define UVH_BAU_DATA_CONFIG_32 0x0438
+
+#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0
+#define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_BAU_DATA_CONFIG_DM_SHFT 8
+#define UVH_BAU_DATA_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_BAU_DATA_CONFIG_DESTMODE_SHFT 11
+#define UVH_BAU_DATA_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_BAU_DATA_CONFIG_STATUS_SHFT 12
+#define UVH_BAU_DATA_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_BAU_DATA_CONFIG_P_SHFT 13
+#define UVH_BAU_DATA_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_BAU_DATA_CONFIG_T_SHFT 15
+#define UVH_BAU_DATA_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_BAU_DATA_CONFIG_M_SHFT 16
+#define UVH_BAU_DATA_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_BAU_DATA_CONFIG_APIC_ID_SHFT 32
+#define UVH_BAU_DATA_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_bau_data_config_u {
+    unsigned long	v;
+    struct uvh_bau_data_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_EVENT_OCCURRED0                             */
+/* ========================================================================= */
+#define UVH_EVENT_OCCURRED0 0x70000UL
+#define UVH_EVENT_OCCURRED0_32 0x005e8
+
+#define UVH_EVENT_OCCURRED0_LB_HCERR_SHFT 0
+#define UVH_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL
+#define UVH_EVENT_OCCURRED0_GR0_HCERR_SHFT 1
+#define UVH_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL
+#define UVH_EVENT_OCCURRED0_GR1_HCERR_SHFT 2
+#define UVH_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL
+#define UVH_EVENT_OCCURRED0_LH_HCERR_SHFT 3
+#define UVH_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL
+#define UVH_EVENT_OCCURRED0_RH_HCERR_SHFT 4
+#define UVH_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000010UL
+#define UVH_EVENT_OCCURRED0_XN_HCERR_SHFT 5
+#define UVH_EVENT_OCCURRED0_XN_HCERR_MASK 0x0000000000000020UL
+#define UVH_EVENT_OCCURRED0_SI_HCERR_SHFT 6
+#define UVH_EVENT_OCCURRED0_SI_HCERR_MASK 0x0000000000000040UL
+#define UVH_EVENT_OCCURRED0_LB_AOERR0_SHFT 7
+#define UVH_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000080UL
+#define UVH_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8
+#define UVH_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL
+#define UVH_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9
+#define UVH_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL
+#define UVH_EVENT_OCCURRED0_LH_AOERR0_SHFT 10
+#define UVH_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_SHFT 11
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL
+#define UVH_EVENT_OCCURRED0_XN_AOERR0_SHFT 12
+#define UVH_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL
+#define UVH_EVENT_OCCURRED0_SI_AOERR0_SHFT 13
+#define UVH_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL
+#define UVH_EVENT_OCCURRED0_LB_AOERR1_SHFT 14
+#define UVH_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL
+#define UVH_EVENT_OCCURRED0_GR0_AOERR1_SHFT 15
+#define UVH_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000000008000UL
+#define UVH_EVENT_OCCURRED0_GR1_AOERR1_SHFT 16
+#define UVH_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000000010000UL
+#define UVH_EVENT_OCCURRED0_LH_AOERR1_SHFT 17
+#define UVH_EVENT_OCCURRED0_LH_AOERR1_MASK 0x0000000000020000UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR1_SHFT 18
+#define UVH_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000040000UL
+#define UVH_EVENT_OCCURRED0_XN_AOERR1_SHFT 19
+#define UVH_EVENT_OCCURRED0_XN_AOERR1_MASK 0x0000000000080000UL
+#define UVH_EVENT_OCCURRED0_SI_AOERR1_SHFT 20
+#define UVH_EVENT_OCCURRED0_SI_AOERR1_MASK 0x0000000000100000UL
+#define UVH_EVENT_OCCURRED0_RH_VPI_INT_SHFT 21
+#define UVH_EVENT_OCCURRED0_RH_VPI_INT_MASK 0x0000000000200000UL
+#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 22
+#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 23
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000000800000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 24
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000001000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 25
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000002000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 26
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000004000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 27
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000000008000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 28
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000000010000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 29
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000000020000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 30
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000000040000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 31
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000000080000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 32
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000000100000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 33
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000000200000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 34
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000000400000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 35
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000000800000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 36
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000001000000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 37
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000002000000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 38
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000004000000000UL
+#define UVH_EVENT_OCCURRED0_L1_NMI_INT_SHFT 39
+#define UVH_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0000008000000000UL
+#define UVH_EVENT_OCCURRED0_STOP_CLOCK_SHFT 40
+#define UVH_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0000010000000000UL
+#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 41
+#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0000020000000000UL
+#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 42
+#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0000040000000000UL
+#define UVH_EVENT_OCCURRED0_LTC_INT_SHFT 43
+#define UVH_EVENT_OCCURRED0_LTC_INT_MASK 0x0000080000000000UL
+#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 44
+#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
+#define UVH_EVENT_OCCURRED0_IPI_INT_SHFT 45
+#define UVH_EVENT_OCCURRED0_IPI_INT_MASK 0x0000200000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT0_SHFT 46
+#define UVH_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0000400000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT1_SHFT 47
+#define UVH_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0000800000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT2_SHFT 48
+#define UVH_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0001000000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT3_SHFT 49
+#define UVH_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0002000000000000UL
+#define UVH_EVENT_OCCURRED0_PROFILE_INT_SHFT 50
+#define UVH_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0004000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC0_SHFT 51
+#define UVH_EVENT_OCCURRED0_RTC0_MASK 0x0008000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC1_SHFT 52
+#define UVH_EVENT_OCCURRED0_RTC1_MASK 0x0010000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC2_SHFT 53
+#define UVH_EVENT_OCCURRED0_RTC2_MASK 0x0020000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC3_SHFT 54
+#define UVH_EVENT_OCCURRED0_RTC3_MASK 0x0040000000000000UL
+#define UVH_EVENT_OCCURRED0_BAU_DATA_SHFT 55
+#define UVH_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL
+#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56
+#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL
+union uvh_event_occurred0_u {
+    unsigned long	v;
+    struct uvh_event_occurred0_s {
+	unsigned long	lb_hcerr             :  1;  /* RW, W1C */
+	unsigned long	gr0_hcerr            :  1;  /* RW, W1C */
+	unsigned long	gr1_hcerr            :  1;  /* RW, W1C */
+	unsigned long	lh_hcerr             :  1;  /* RW, W1C */
+	unsigned long	rh_hcerr             :  1;  /* RW, W1C */
+	unsigned long	xn_hcerr             :  1;  /* RW, W1C */
+	unsigned long	si_hcerr             :  1;  /* RW, W1C */
+	unsigned long	lb_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	gr0_aoerr0           :  1;  /* RW, W1C */
+	unsigned long	gr1_aoerr0           :  1;  /* RW, W1C */
+	unsigned long	lh_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	rh_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	xn_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	si_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	lb_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	gr0_aoerr1           :  1;  /* RW, W1C */
+	unsigned long	gr1_aoerr1           :  1;  /* RW, W1C */
+	unsigned long	lh_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	rh_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	xn_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	si_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	rh_vpi_int           :  1;  /* RW, W1C */
+	unsigned long	system_shutdown_int  :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_0         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_1         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_2         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_3         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_4         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_5         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_6         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_7         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_8         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_9         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_10        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_11        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_12        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_13        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_14        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_15        :  1;  /* RW, W1C */
+	unsigned long	l1_nmi_int           :  1;  /* RW, W1C */
+	unsigned long	stop_clock           :  1;  /* RW, W1C */
+	unsigned long	asic_to_l1           :  1;  /* RW, W1C */
+	unsigned long	l1_to_asic           :  1;  /* RW, W1C */
+	unsigned long	ltc_int              :  1;  /* RW, W1C */
+	unsigned long	la_seq_trigger       :  1;  /* RW, W1C */
+	unsigned long	ipi_int              :  1;  /* RW, W1C */
+	unsigned long	extio_int0           :  1;  /* RW, W1C */
+	unsigned long	extio_int1           :  1;  /* RW, W1C */
+	unsigned long	extio_int2           :  1;  /* RW, W1C */
+	unsigned long	extio_int3           :  1;  /* RW, W1C */
+	unsigned long	profile_int          :  1;  /* RW, W1C */
+	unsigned long	rtc0                 :  1;  /* RW, W1C */
+	unsigned long	rtc1                 :  1;  /* RW, W1C */
+	unsigned long	rtc2                 :  1;  /* RW, W1C */
+	unsigned long	rtc3                 :  1;  /* RW, W1C */
+	unsigned long	bau_data             :  1;  /* RW, W1C */
+	unsigned long	power_management_req :  1;  /* RW, W1C */
+	unsigned long	rsvd_57_63           :  7;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                        UVH_EVENT_OCCURRED0_ALIAS                          */
+/* ========================================================================= */
+#define UVH_EVENT_OCCURRED0_ALIAS 0x0000000000070008UL
+#define UVH_EVENT_OCCURRED0_ALIAS_32 0x005f0
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPB                                */
+/* ========================================================================= */
+#define UVH_INT_CMPB 0x22080UL
+
+#define UVH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
+#define UVH_INT_CMPB_REAL_TIME_CMPB_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpb_u {
+    unsigned long	v;
+    struct uvh_int_cmpb_s {
+	unsigned long	real_time_cmpb : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPC                                */
+/* ========================================================================= */
+#define UVH_INT_CMPC 0x22100UL
+
+#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
+#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpc_u {
+    unsigned long	v;
+    struct uvh_int_cmpc_s {
+	unsigned long	real_time_cmpc : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPD                                */
+/* ========================================================================= */
+#define UVH_INT_CMPD 0x22180UL
+
+#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
+#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpd_u {
+    unsigned long	v;
+    struct uvh_int_cmpd_s {
+	unsigned long	real_time_cmpd : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_IPI_INT                                 */
+/* ========================================================================= */
+#define UVH_IPI_INT 0x60500UL
+#define UVH_IPI_INT_32 0x0348
+
+#define UVH_IPI_INT_VECTOR_SHFT 0
+#define UVH_IPI_INT_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_IPI_INT_DELIVERY_MODE_SHFT 8
+#define UVH_IPI_INT_DELIVERY_MODE_MASK 0x0000000000000700UL
+#define UVH_IPI_INT_DESTMODE_SHFT 11
+#define UVH_IPI_INT_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_IPI_INT_APIC_ID_SHFT 16
+#define UVH_IPI_INT_APIC_ID_MASK 0x0000ffffffff0000UL
+#define UVH_IPI_INT_SEND_SHFT 63
+#define UVH_IPI_INT_SEND_MASK 0x8000000000000000UL
+
+union uvh_ipi_int_u {
+    unsigned long	v;
+    struct uvh_ipi_int_s {
+	unsigned long	vector_       :  8;  /* RW */
+	unsigned long	delivery_mode :  3;  /* RW */
+	unsigned long	destmode      :  1;  /* RW */
+	unsigned long	rsvd_12_15    :  4;  /*    */
+	unsigned long	apic_id       : 32;  /* RW */
+	unsigned long	rsvd_48_62    : 15;  /*    */
+	unsigned long	send          :  1;  /* WP */
+    } s;
+};
+
+/* ========================================================================= */
+/*                   UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST                     */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x009c0
+
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_SHFT 4
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_MASK 0x000007fffffffff0UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_SHFT 49
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_MASK 0x7ffe000000000000UL
+
+union uvh_lb_bau_intd_payload_queue_first_u {
+    unsigned long	v;
+    struct uvh_lb_bau_intd_payload_queue_first_s {
+	unsigned long	rsvd_0_3:  4;  /*    */
+	unsigned long	address : 39;  /* RW */
+	unsigned long	rsvd_43_48:  6;  /*    */
+	unsigned long	node_id : 14;  /* RW */
+	unsigned long	rsvd_63 :  1;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST                     */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x009c8
+
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_SHFT 4
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_MASK 0x000007fffffffff0UL
+
+union uvh_lb_bau_intd_payload_queue_last_u {
+    unsigned long	v;
+    struct uvh_lb_bau_intd_payload_queue_last_s {
+	unsigned long	rsvd_0_3:  4;  /*    */
+	unsigned long	address : 39;  /* RW */
+	unsigned long	rsvd_43_63: 21;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL                     */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x009d0
+
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_SHFT 4
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_MASK 0x000007fffffffff0UL
+
+union uvh_lb_bau_intd_payload_queue_tail_u {
+    unsigned long	v;
+    struct uvh_lb_bau_intd_payload_queue_tail_s {
+	unsigned long	rsvd_0_3:  4;  /*    */
+	unsigned long	address : 39;  /* RW */
+	unsigned long	rsvd_43_63: 21;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                   UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE                    */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0x0a68
+
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_MASK 0x0000000000000001UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_SHFT 1
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_MASK 0x0000000000000002UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_SHFT 2
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_MASK 0x0000000000000004UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_3_SHFT 3
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_3_MASK 0x0000000000000008UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_4_SHFT 4
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_4_MASK 0x0000000000000010UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_5_SHFT 5
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_5_MASK 0x0000000000000020UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_6_SHFT 6
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_6_MASK 0x0000000000000040UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_7_SHFT 7
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_7_MASK 0x0000000000000080UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_0_SHFT 8
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_0_MASK 0x0000000000000100UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_1_SHFT 9
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_1_MASK 0x0000000000000200UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_2_SHFT 10
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_2_MASK 0x0000000000000400UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_3_SHFT 11
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_3_MASK 0x0000000000000800UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_4_SHFT 12
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_4_MASK 0x0000000000001000UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_5_SHFT 13
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_5_MASK 0x0000000000002000UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_SHFT 14
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_MASK 0x0000000000004000UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_SHFT 15
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_MASK 0x0000000000008000UL
+union uvh_lb_bau_intd_software_acknowledge_u {
+    unsigned long	v;
+    struct uvh_lb_bau_intd_software_acknowledge_s {
+	unsigned long	pending_0 :  1;  /* RW, W1C */
+	unsigned long	pending_1 :  1;  /* RW, W1C */
+	unsigned long	pending_2 :  1;  /* RW, W1C */
+	unsigned long	pending_3 :  1;  /* RW, W1C */
+	unsigned long	pending_4 :  1;  /* RW, W1C */
+	unsigned long	pending_5 :  1;  /* RW, W1C */
+	unsigned long	pending_6 :  1;  /* RW, W1C */
+	unsigned long	pending_7 :  1;  /* RW, W1C */
+	unsigned long	timeout_0 :  1;  /* RW, W1C */
+	unsigned long	timeout_1 :  1;  /* RW, W1C */
+	unsigned long	timeout_2 :  1;  /* RW, W1C */
+	unsigned long	timeout_3 :  1;  /* RW, W1C */
+	unsigned long	timeout_4 :  1;  /* RW, W1C */
+	unsigned long	timeout_5 :  1;  /* RW, W1C */
+	unsigned long	timeout_6 :  1;  /* RW, W1C */
+	unsigned long	timeout_7 :  1;  /* RW, W1C */
+	unsigned long	rsvd_16_63: 48;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS                 */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x0000000000320088UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0x0a70
+
+/* ========================================================================= */
+/*                     UVH_LB_BAU_SB_ACTIVATION_CONTROL                      */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 0x009a8
+
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_SHFT 0
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_MASK 0x000000000000003fUL
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT 62
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_MASK 0x4000000000000000UL
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INIT_SHFT 63
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INIT_MASK 0x8000000000000000UL
+
+union uvh_lb_bau_sb_activation_control_u {
+    unsigned long	v;
+    struct uvh_lb_bau_sb_activation_control_s {
+	unsigned long	index :  6;  /* RW */
+	unsigned long	rsvd_6_61: 56;  /*    */
+	unsigned long	push  :  1;  /* WP */
+	unsigned long	init  :  1;  /* WP */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_LB_BAU_SB_ACTIVATION_STATUS_0                      */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x009b0
+
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_SHFT 0
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_MASK 0xffffffffffffffffUL
+
+union uvh_lb_bau_sb_activation_status_0_u {
+    unsigned long	v;
+    struct uvh_lb_bau_sb_activation_status_0_s {
+	unsigned long	status : 64;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_LB_BAU_SB_ACTIVATION_STATUS_1                      */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x009b8
+
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_SHFT 0
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_MASK 0xffffffffffffffffUL
+
+union uvh_lb_bau_sb_activation_status_1_u {
+    unsigned long	v;
+    struct uvh_lb_bau_sb_activation_status_1_s {
+	unsigned long	status : 64;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                      UVH_LB_BAU_SB_DESCRIPTOR_BASE                        */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 0x009a0
+
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_SHFT 12
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_MASK 0x000007fffffff000UL
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT 49
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK 0x7ffe000000000000UL
+
+union uvh_lb_bau_sb_descriptor_base_u {
+    unsigned long	v;
+    struct uvh_lb_bau_sb_descriptor_base_s {
+	unsigned long	rsvd_0_11    : 12;  /*    */
+	unsigned long	page_address : 31;  /* RW */
+	unsigned long	rsvd_43_48   :  6;  /*    */
+	unsigned long	node_id      : 14;  /* RW */
+	unsigned long	rsvd_63      :  1;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                      UVH_LB_MCAST_AOERR0_RPT_ENABLE                       */
+/* ========================================================================= */
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE 0x50b20UL
+
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_SHFT 0
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_MASK 0x0000000000000001UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_SHFT 1
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_MASK 0x0000000000000002UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_SHFT 2
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_MASK 0x0000000000000004UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_SHFT 3
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_MASK 0x0000000000000008UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_SHFT 4
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_MASK 0x0000000000000010UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_SHFT 5
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_MASK 0x0000000000000020UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_SHFT 6
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_MASK 0x0000000000000040UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_SHFT 7
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_MASK 0x0000000000000080UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_SHFT 8
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_MASK 0x0000000000000100UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_SHFT 9
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_MASK 0x0000000000000200UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_SHFT 10
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_MASK 0x0000000000000400UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_SHFT 11
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_MASK 0x0000000000000800UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_SHFT 12
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_MASK 0x0000000000001000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_SHFT 13
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_MASK 0x0000000000002000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_SHFT 14
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_MASK 0x0000000000004000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_SHFT 15
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_MASK 0x0000000000008000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_SHFT 16
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_MASK 0x0000000000010000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_SHFT 17
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_MASK 0x0000000000020000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_SHFT 18
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_MASK 0x0000000000040000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_SHFT 19
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_MASK 0x0000000000080000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_SHFT 20
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_MASK 0x0000000000100000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_SHFT 21
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_MASK 0x0000000000200000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_AMO_TIMEOUT_SHFT 22
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_AMO_TIMEOUT_MASK 0x0000000000400000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_PUT_TIMEOUT_SHFT 23
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_PUT_TIMEOUT_MASK 0x0000000000800000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_SHFT 24
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_MASK 0x0000000001000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_SHFT 25
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_MASK 0x0000000002000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_SHFT 26
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_MASK 0x0000000004000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_SHFT 27
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_MASK 0x0000000008000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_SHFT 28
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_MASK 0x0000000010000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_SHFT 29
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_MASK 0x0000000020000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_SHFT 30
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_MASK 0x0000000040000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_SHFT 31
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_MASK 0x0000000080000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_SHFT 32
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_MASK 0x0000000100000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_SHFT 33
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_MASK 0x0000000200000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_SHFT 34
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_MASK 0x0000000400000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_SHFT 35
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_MASK 0x0000000800000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_SHFT 36
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_MASK 0x0000001000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_SHFT 37
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_MASK 0x0000002000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_SHFT 38
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_MASK 0x0000004000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_SHFT 39
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_MASK 0x0000008000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_SHFT 40
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_MASK 0x0000010000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_SHFT 41
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_MASK 0x0000020000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_SHFT 42
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_MASK 0x0000040000000000UL
+
+union uvh_lb_mcast_aoerr0_rpt_enable_u {
+    unsigned long	v;
+    struct uvh_lb_mcast_aoerr0_rpt_enable_s {
+	unsigned long	mcast_obese_msg                         :  1;  /* RW */
+	unsigned long	mcast_data_sb_err                       :  1;  /* RW */
+	unsigned long	mcast_nack_buff_parity                  :  1;  /* RW */
+	unsigned long	mcast_timeout                           :  1;  /* RW */
+	unsigned long	mcast_inactive_reply                    :  1;  /* RW */
+	unsigned long	mcast_upgrade_error                     :  1;  /* RW */
+	unsigned long	mcast_reg_count_underflow               :  1;  /* RW */
+	unsigned long	mcast_rep_obese_msg                     :  1;  /* RW */
+	unsigned long	ucache_req_runt_msg                     :  1;  /* RW */
+	unsigned long	ucache_req_obese_msg                    :  1;  /* RW */
+	unsigned long	ucache_req_data_sb_err                  :  1;  /* RW */
+	unsigned long	ucache_rep_runt_msg                     :  1;  /* RW */
+	unsigned long	ucache_rep_obese_msg                    :  1;  /* RW */
+	unsigned long	ucache_rep_data_sb_err                  :  1;  /* RW */
+	unsigned long	ucache_rep_command_err                  :  1;  /* RW */
+	unsigned long	ucache_pend_timeout                     :  1;  /* RW */
+	unsigned long	macc_req_runt_msg                       :  1;  /* RW */
+	unsigned long	macc_req_obese_msg                      :  1;  /* RW */
+	unsigned long	macc_req_data_sb_err                    :  1;  /* RW */
+	unsigned long	macc_rep_runt_msg                       :  1;  /* RW */
+	unsigned long	macc_rep_obese_msg                      :  1;  /* RW */
+	unsigned long	macc_rep_data_sb_err                    :  1;  /* RW */
+	unsigned long	macc_amo_timeout                        :  1;  /* RW */
+	unsigned long	macc_put_timeout                        :  1;  /* RW */
+	unsigned long	macc_spurious_event                     :  1;  /* RW */
+	unsigned long	ioh_destination_table_parity            :  1;  /* RW */
+	unsigned long	get_had_error_reply                     :  1;  /* RW */
+	unsigned long	get_timeout                             :  1;  /* RW */
+	unsigned long	lock_manager_had_error_reply            :  1;  /* RW */
+	unsigned long	put_had_error_reply                     :  1;  /* RW */
+	unsigned long	put_timeout                             :  1;  /* RW */
+	unsigned long	sb_activation_overrun                   :  1;  /* RW */
+	unsigned long	completed_gb_activation_had_error_reply :  1;  /* RW */
+	unsigned long	completed_gb_activation_timeout         :  1;  /* RW */
+	unsigned long	descriptor_buffer_0_parity              :  1;  /* RW */
+	unsigned long	descriptor_buffer_1_parity              :  1;  /* RW */
+	unsigned long	socket_destination_table_parity         :  1;  /* RW */
+	unsigned long	bau_reply_payload_corruption            :  1;  /* RW */
+	unsigned long	io_port_destination_table_parity        :  1;  /* RW */
+	unsigned long	intd_soft_ack_timeout                   :  1;  /* RW */
+	unsigned long	int_rep_obese_msg                       :  1;  /* RW */
+	unsigned long	int_rep_command_err                     :  1;  /* RW */
+	unsigned long	int_timeout                             :  1;  /* RW */
+	unsigned long	rsvd_43_63                              : 21;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                          UVH_LOCAL_INT0_CONFIG                            */
+/* ========================================================================= */
+#define UVH_LOCAL_INT0_CONFIG 0x61000UL
+
+#define UVH_LOCAL_INT0_CONFIG_VECTOR_SHFT 0
+#define UVH_LOCAL_INT0_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_LOCAL_INT0_CONFIG_DM_SHFT 8
+#define UVH_LOCAL_INT0_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_LOCAL_INT0_CONFIG_DESTMODE_SHFT 11
+#define UVH_LOCAL_INT0_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_LOCAL_INT0_CONFIG_STATUS_SHFT 12
+#define UVH_LOCAL_INT0_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_LOCAL_INT0_CONFIG_P_SHFT 13
+#define UVH_LOCAL_INT0_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_LOCAL_INT0_CONFIG_T_SHFT 15
+#define UVH_LOCAL_INT0_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_LOCAL_INT0_CONFIG_M_SHFT 16
+#define UVH_LOCAL_INT0_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_LOCAL_INT0_CONFIG_APIC_ID_SHFT 32
+#define UVH_LOCAL_INT0_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_local_int0_config_u {
+    unsigned long	v;
+    struct uvh_local_int0_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                          UVH_LOCAL_INT0_ENABLE                            */
+/* ========================================================================= */
+#define UVH_LOCAL_INT0_ENABLE 0x65000UL
+
+#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_SHFT 0
+#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_MASK 0x0000000000000001UL
+#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_SHFT 1
+#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_MASK 0x0000000000000002UL
+#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_SHFT 2
+#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_MASK 0x0000000000000004UL
+#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_SHFT 3
+#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_MASK 0x0000000000000008UL
+#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_SHFT 4
+#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_MASK 0x0000000000000010UL
+#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_SHFT 5
+#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_MASK 0x0000000000000020UL
+#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_SHFT 6
+#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_MASK 0x0000000000000040UL
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_SHFT 7
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_MASK 0x0000000000000080UL
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_SHFT 8
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_MASK 0x0000000000000100UL
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_SHFT 9
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_MASK 0x0000000000000200UL
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_SHFT 10
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_MASK 0x0000000000000400UL
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_SHFT 11
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_MASK 0x0000000000000800UL
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_SHFT 12
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_MASK 0x0000000000001000UL
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_SHFT 13
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_MASK 0x0000000000002000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_SHFT 14
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_MASK 0x0000000000004000UL
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_SHFT 15
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_MASK 0x0000000000008000UL
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_SHFT 16
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_MASK 0x0000000000010000UL
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_SHFT 17
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_MASK 0x0000000000020000UL
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_SHFT 18
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_MASK 0x0000000000040000UL
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_SHFT 19
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_MASK 0x0000000000080000UL
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_SHFT 20
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_MASK 0x0000000000100000UL
+#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_SHFT 21
+#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_MASK 0x0000000000200000UL
+#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_SHFT 22
+#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_SHFT 23
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_MASK 0x0000000000800000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_SHFT 24
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_MASK 0x0000000001000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_SHFT 25
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_MASK 0x0000000002000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_SHFT 26
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_MASK 0x0000000004000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_SHFT 27
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_MASK 0x0000000008000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_SHFT 28
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_MASK 0x0000000010000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_SHFT 29
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_MASK 0x0000000020000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_SHFT 30
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_MASK 0x0000000040000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_SHFT 31
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_MASK 0x0000000080000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_SHFT 32
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_MASK 0x0000000100000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_SHFT 33
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_MASK 0x0000000200000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_SHFT 34
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_MASK 0x0000000400000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_SHFT 35
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_MASK 0x0000000800000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_SHFT 36
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_MASK 0x0000001000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_SHFT 37
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_MASK 0x0000002000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_SHFT 38
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_MASK 0x0000004000000000UL
+#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_SHFT 39
+#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_MASK 0x0000008000000000UL
+#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_SHFT 40
+#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_MASK 0x0000010000000000UL
+#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_SHFT 41
+#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_MASK 0x0000020000000000UL
+#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_SHFT 42
+#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_MASK 0x0000040000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LTC_INT_SHFT 43
+#define UVH_LOCAL_INT0_ENABLE_LTC_INT_MASK 0x0000080000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_SHFT 44
+#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
+
+union uvh_local_int0_enable_u {
+    unsigned long	v;
+    struct uvh_local_int0_enable_s {
+	unsigned long	lb_hcerr            :  1;  /* RW */
+	unsigned long	gr0_hcerr           :  1;  /* RW */
+	unsigned long	gr1_hcerr           :  1;  /* RW */
+	unsigned long	lh_hcerr            :  1;  /* RW */
+	unsigned long	rh_hcerr            :  1;  /* RW */
+	unsigned long	xn_hcerr            :  1;  /* RW */
+	unsigned long	si_hcerr            :  1;  /* RW */
+	unsigned long	lb_aoerr0           :  1;  /* RW */
+	unsigned long	gr0_aoerr0          :  1;  /* RW */
+	unsigned long	gr1_aoerr0          :  1;  /* RW */
+	unsigned long	lh_aoerr0           :  1;  /* RW */
+	unsigned long	rh_aoerr0           :  1;  /* RW */
+	unsigned long	xn_aoerr0           :  1;  /* RW */
+	unsigned long	si_aoerr0           :  1;  /* RW */
+	unsigned long	lb_aoerr1           :  1;  /* RW */
+	unsigned long	gr0_aoerr1          :  1;  /* RW */
+	unsigned long	gr1_aoerr1          :  1;  /* RW */
+	unsigned long	lh_aoerr1           :  1;  /* RW */
+	unsigned long	rh_aoerr1           :  1;  /* RW */
+	unsigned long	xn_aoerr1           :  1;  /* RW */
+	unsigned long	si_aoerr1           :  1;  /* RW */
+	unsigned long	rh_vpi_int          :  1;  /* RW */
+	unsigned long	system_shutdown_int :  1;  /* RW */
+	unsigned long	lb_irq_int_0        :  1;  /* RW */
+	unsigned long	lb_irq_int_1        :  1;  /* RW */
+	unsigned long	lb_irq_int_2        :  1;  /* RW */
+	unsigned long	lb_irq_int_3        :  1;  /* RW */
+	unsigned long	lb_irq_int_4        :  1;  /* RW */
+	unsigned long	lb_irq_int_5        :  1;  /* RW */
+	unsigned long	lb_irq_int_6        :  1;  /* RW */
+	unsigned long	lb_irq_int_7        :  1;  /* RW */
+	unsigned long	lb_irq_int_8        :  1;  /* RW */
+	unsigned long	lb_irq_int_9        :  1;  /* RW */
+	unsigned long	lb_irq_int_10       :  1;  /* RW */
+	unsigned long	lb_irq_int_11       :  1;  /* RW */
+	unsigned long	lb_irq_int_12       :  1;  /* RW */
+	unsigned long	lb_irq_int_13       :  1;  /* RW */
+	unsigned long	lb_irq_int_14       :  1;  /* RW */
+	unsigned long	lb_irq_int_15       :  1;  /* RW */
+	unsigned long	l1_nmi_int          :  1;  /* RW */
+	unsigned long	stop_clock          :  1;  /* RW */
+	unsigned long	asic_to_l1          :  1;  /* RW */
+	unsigned long	l1_to_asic          :  1;  /* RW */
+	unsigned long	ltc_int             :  1;  /* RW */
+	unsigned long	la_seq_trigger      :  1;  /* RW */
+	unsigned long	rsvd_45_63          : 19;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_NODE_ID                                 */
+/* ========================================================================= */
+#define UVH_NODE_ID 0x0UL
+
+#define UVH_NODE_ID_FORCE1_SHFT 0
+#define UVH_NODE_ID_FORCE1_MASK 0x0000000000000001UL
+#define UVH_NODE_ID_MANUFACTURER_SHFT 1
+#define UVH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL
+#define UVH_NODE_ID_PART_NUMBER_SHFT 12
+#define UVH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL
+#define UVH_NODE_ID_REVISION_SHFT 28
+#define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL
+#define UVH_NODE_ID_NODE_ID_SHFT 32
+#define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL
+#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48
+#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL
+#define UVH_NODE_ID_NI_PORT_SHFT 56
+#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL
+
+union uvh_node_id_u {
+    unsigned long	v;
+    struct uvh_node_id_s {
+	unsigned long	force1        :  1;  /* RO */
+	unsigned long	manufacturer  : 11;  /* RO */
+	unsigned long	part_number   : 16;  /* RO */
+	unsigned long	revision      :  4;  /* RO */
+	unsigned long	node_id       : 15;  /* RW */
+	unsigned long	rsvd_47       :  1;  /*    */
+	unsigned long	nodes_per_bit :  7;  /* RW */
+	unsigned long	rsvd_55       :  1;  /*    */
+	unsigned long	ni_port       :  4;  /* RO */
+	unsigned long	rsvd_60_63    :  4;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                          UVH_NODE_PRESENT_TABLE                           */
+/* ========================================================================= */
+#define UVH_NODE_PRESENT_TABLE 0x1400UL
+#define UVH_NODE_PRESENT_TABLE_DEPTH 16
+
+#define UVH_NODE_PRESENT_TABLE_NODES_SHFT 0
+#define UVH_NODE_PRESENT_TABLE_NODES_MASK 0xffffffffffffffffUL
+
+union uvh_node_present_table_u {
+    unsigned long	v;
+    struct uvh_node_present_table_s {
+	unsigned long	nodes : 64;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_0_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_1_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_2_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR                      */
+/* ========================================================================= */
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR 0x1600020UL
+
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_cfg_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_cfg_overlay_config_mmr_s {
+	unsigned long	rsvd_0_25: 26;  /*    */
+	unsigned long	base   : 20;  /* RW */
+	unsigned long	rsvd_46_62: 17;  /*    */
+	unsigned long	enable :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
+/* ========================================================================= */
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
+
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0001000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_gru_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_gru_overlay_config_mmr_s {
+	unsigned long	rsvd_0_27: 28;  /*    */
+	unsigned long	base   : 18;  /* RW */
+	unsigned long	rsvd_46_47:  2;  /*    */
+	unsigned long	gr4    :  1;  /* RW */
+	unsigned long	rsvd_49_51:  3;  /*    */
+	unsigned long	n_gru  :  4;  /* RW */
+	unsigned long	rsvd_56_62:  7;  /*    */
+	unsigned long	enable :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                   UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR                     */
+/* ========================================================================= */
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR 0x1600030UL
+
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT 30
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003fffc0000000UL
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_SHFT 46
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_MASK 0x000fc00000000000UL
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_SHFT 52
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_MASK 0x00f0000000000000UL
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_mmioh_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_mmioh_overlay_config_mmr_s {
+	unsigned long	rsvd_0_29: 30;  /*    */
+	unsigned long	base   : 16;  /* RW */
+	unsigned long	m_io   :  6;  /* RW */
+	unsigned long	n_io   :  4;  /* RW */
+	unsigned long	rsvd_56_62:  7;  /*    */
+	unsigned long	enable :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR                      */
+/* ========================================================================= */
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
+
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_mmr_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_mmr_overlay_config_mmr_s {
+	unsigned long	rsvd_0_25: 26;  /*    */
+	unsigned long	base     : 20;  /* RW */
+	unsigned long	dual_hub :  1;  /* RW */
+	unsigned long	rsvd_47_62: 16;  /*    */
+	unsigned long	enable   :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                                 UVH_RTC                                   */
+/* ========================================================================= */
+#define UVH_RTC 0x340000UL
+
+#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0
+#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL
+
+union uvh_rtc_u {
+    unsigned long	v;
+    struct uvh_rtc_s {
+	unsigned long	real_time_clock : 56;  /* RW */
+	unsigned long	rsvd_56_63      :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC1_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC1_INT_CONFIG 0x615c0UL
+
+#define UVH_RTC1_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC1_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC1_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC1_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC1_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC1_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC1_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC1_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC1_INT_CONFIG_P_SHFT 13
+#define UVH_RTC1_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC1_INT_CONFIG_T_SHFT 15
+#define UVH_RTC1_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC1_INT_CONFIG_M_SHFT 16
+#define UVH_RTC1_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC1_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC1_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc1_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc1_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC2_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC2_INT_CONFIG 0x61600UL
+
+#define UVH_RTC2_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC2_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC2_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC2_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC2_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC2_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC2_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC2_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC2_INT_CONFIG_P_SHFT 13
+#define UVH_RTC2_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC2_INT_CONFIG_T_SHFT 15
+#define UVH_RTC2_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC2_INT_CONFIG_M_SHFT 16
+#define UVH_RTC2_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC2_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC2_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc2_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc2_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC3_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC3_INT_CONFIG 0x61640UL
+
+#define UVH_RTC3_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC3_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC3_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC3_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC3_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC3_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC3_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC3_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC3_INT_CONFIG_P_SHFT 13
+#define UVH_RTC3_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC3_INT_CONFIG_T_SHFT 15
+#define UVH_RTC3_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC3_INT_CONFIG_M_SHFT 16
+#define UVH_RTC3_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC3_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC3_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc3_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc3_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                            UVH_RTC_INC_RATIO                              */
+/* ========================================================================= */
+#define UVH_RTC_INC_RATIO 0x350000UL
+
+#define UVH_RTC_INC_RATIO_FRACTION_SHFT 0
+#define UVH_RTC_INC_RATIO_FRACTION_MASK 0x00000000000fffffUL
+#define UVH_RTC_INC_RATIO_RATIO_SHFT 20
+#define UVH_RTC_INC_RATIO_RATIO_MASK 0x0000000000700000UL
+
+union uvh_rtc_inc_ratio_u {
+    unsigned long	v;
+    struct uvh_rtc_inc_ratio_s {
+	unsigned long	fraction : 20;  /* RW */
+	unsigned long	ratio    :  3;  /* RW */
+	unsigned long	rsvd_23_63: 41;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                          UVH_SI_ADDR_MAP_CONFIG                           */
+/* ========================================================================= */
+#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
+
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
+
+union uvh_si_addr_map_config_u {
+    unsigned long	v;
+    struct uvh_si_addr_map_config_s {
+	unsigned long	m_skt :  6;  /* RW */
+	unsigned long	rsvd_6_7:  2;  /*    */
+	unsigned long	n_skt :  4;  /* RW */
+	unsigned long	rsvd_12_63: 52;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS0_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
+
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias0_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias0_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS1_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
+
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias1_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias1_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS2_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
+
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias2_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias2_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+
+#endif /* _ASM_X86_UV_UV_MMRS_H */
diff --git a/arch/x86/include/asm/vdso.h b/arch/x86/include/asm/vdso.h
new file mode 100644
index 0000000..9064052
--- /dev/null
+++ b/arch/x86/include/asm/vdso.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_X86_VDSO_H
+#define _ASM_X86_VDSO_H
+
+#ifdef CONFIG_X86_64
+extern const char VDSO64_PRELINK[];
+
+/*
+ * Given a pointer to the vDSO image, find the pointer to VDSO64_name
+ * as that symbol is defined in the vDSO sources or linker script.
+ */
+#define VDSO64_SYMBOL(base, name)					\
+({									\
+	extern const char VDSO64_##name[];				\
+	(void *)(VDSO64_##name - VDSO64_PRELINK + (unsigned long)(base)); \
+})
+#endif
+
+#if defined CONFIG_X86_32 || defined CONFIG_COMPAT
+extern const char VDSO32_PRELINK[];
+
+/*
+ * Given a pointer to the vDSO image, find the pointer to VDSO32_name
+ * as that symbol is defined in the vDSO sources or linker script.
+ */
+#define VDSO32_SYMBOL(base, name)					\
+({									\
+	extern const char VDSO32_##name[];				\
+	(void *)(VDSO32_##name - VDSO32_PRELINK + (unsigned long)(base)); \
+})
+#endif
+
+/*
+ * These symbols are defined with the addresses in the vsyscall page.
+ * See vsyscall-sigreturn.S.
+ */
+extern void __user __kernel_sigreturn;
+extern void __user __kernel_rt_sigreturn;
+
+/*
+ * These symbols are defined by vdso32.S to mark the bounds
+ * of the ELF DSO images included therein.
+ */
+extern const char vdso32_int80_start, vdso32_int80_end;
+extern const char vdso32_syscall_start, vdso32_syscall_end;
+extern const char vdso32_sysenter_start, vdso32_sysenter_end;
+
+#endif /* _ASM_X86_VDSO_H */
diff --git a/arch/x86/include/asm/vga.h b/arch/x86/include/asm/vga.h
new file mode 100644
index 0000000..c4b9dc2
--- /dev/null
+++ b/arch/x86/include/asm/vga.h
@@ -0,0 +1,20 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _ASM_X86_VGA_H
+#define _ASM_X86_VGA_H
+
+/*
+ *	On the PC, we can just recalculate addresses and then
+ *	access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x, s) (unsigned long)phys_to_virt(x)
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x, y) (*(y) = (x))
+
+#endif /* _ASM_X86_VGA_H */
diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h
new file mode 100644
index 0000000..dc27a69
--- /dev/null
+++ b/arch/x86/include/asm/vgtod.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_X86_VGTOD_H
+#define _ASM_X86_VGTOD_H
+
+#include <asm/vsyscall.h>
+#include <linux/clocksource.h>
+
+struct vsyscall_gtod_data {
+	seqlock_t	lock;
+
+	/* open coded 'struct timespec' */
+	time_t		wall_time_sec;
+	u32		wall_time_nsec;
+
+	int		sysctl_enabled;
+	struct timezone sys_tz;
+	struct { /* extract of a clocksource struct */
+		cycle_t (*vread)(void);
+		cycle_t	cycle_last;
+		cycle_t	mask;
+		u32	mult;
+		u32	shift;
+	} clock;
+	struct timespec wall_to_monotonic;
+};
+extern struct vsyscall_gtod_data __vsyscall_gtod_data
+__section_vsyscall_gtod_data;
+extern struct vsyscall_gtod_data vsyscall_gtod_data;
+
+#endif /* _ASM_X86_VGTOD_H */
diff --git a/arch/x86/include/asm/vic.h b/arch/x86/include/asm/vic.h
new file mode 100644
index 0000000..53100f3
--- /dev/null
+++ b/arch/x86/include/asm/vic.h
@@ -0,0 +1,61 @@
+/* Copyright (C) 1999,2001
+ *
+ * Author: J.E.J.Bottomley@HansenPartnership.com
+ *
+ * Standard include definitions for the NCR Voyager Interrupt Controller */
+
+/* The eight CPI vectors.  To activate a CPI, you write a bit mask
+ * corresponding to the processor set to be interrupted into the
+ * relevant register.  That set of CPUs will then be interrupted with
+ * the CPI */
+static const int VIC_CPI_Registers[] =
+	{0xFC00, 0xFC01, 0xFC08, 0xFC09,
+	 0xFC10, 0xFC11, 0xFC18, 0xFC19 };
+
+#define VIC_PROC_WHO_AM_I		0xfc29
+#	define	QUAD_IDENTIFIER		0xC0
+#	define  EIGHT_SLOT_IDENTIFIER	0xE0
+#define QIC_EXTENDED_PROCESSOR_SELECT	0xFC72
+#define VIC_CPI_BASE_REGISTER		0xFC41
+#define VIC_PROCESSOR_ID		0xFC21
+#	define VIC_CPU_MASQUERADE_ENABLE 0x8
+
+#define VIC_CLAIM_REGISTER_0		0xFC38
+#define VIC_CLAIM_REGISTER_1		0xFC39
+#define VIC_REDIRECT_REGISTER_0		0xFC60
+#define VIC_REDIRECT_REGISTER_1		0xFC61
+#define VIC_PRIORITY_REGISTER		0xFC20
+
+#define VIC_PRIMARY_MC_BASE		0xFC48
+#define VIC_SECONDARY_MC_BASE		0xFC49
+
+#define QIC_PROCESSOR_ID		0xFC71
+#	define	QIC_CPUID_ENABLE	0x08
+
+#define QIC_VIC_CPI_BASE_REGISTER	0xFC79
+#define QIC_CPI_BASE_REGISTER		0xFC7A
+
+#define QIC_MASK_REGISTER0		0xFC80
+/* NOTE: these are masked high, enabled low */
+#	define QIC_PERF_TIMER		0x01
+#	define QIC_LPE			0x02
+#	define QIC_SYS_INT		0x04
+#	define QIC_CMN_INT		0x08
+/* at the moment, just enable CMN_INT, disable SYS_INT */
+#	define QIC_DEFAULT_MASK0	(~(QIC_CMN_INT /* | VIC_SYS_INT */))
+#define QIC_MASK_REGISTER1		0xFC81
+#	define QIC_BOOT_CPI_MASK	0xFE
+/* Enable CPI's 1-6 inclusive */
+#	define QIC_CPI_ENABLE		0x81
+
+#define QIC_INTERRUPT_CLEAR0		0xFC8A
+#define QIC_INTERRUPT_CLEAR1		0xFC8B
+
+/* this is where we place the CPI vectors */
+#define VIC_DEFAULT_CPI_BASE		0xC0
+/* this is where we place the QIC CPI vectors */
+#define QIC_DEFAULT_CPI_BASE		0xD0
+
+#define VIC_BOOT_INTERRUPT_MASK		0xfe
+
+extern void smp_vic_timer_interrupt(void);
diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h
new file mode 100644
index 0000000..166adf6
--- /dev/null
+++ b/arch/x86/include/asm/visws/cobalt.h
@@ -0,0 +1,125 @@
+#ifndef _ASM_X86_VISWS_COBALT_H
+#define _ASM_X86_VISWS_COBALT_H
+
+#include <asm/fixmap.h>
+
+/*
+ * Cobalt SGI Visual Workstation system ASIC
+ */ 
+
+#define CO_CPU_NUM_PHYS 0x1e00
+#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
+
+#define CO_CPU_MAX 4
+
+#define	CO_CPU_PHYS		0xc2000000
+#define	CO_APIC_PHYS		0xc4000000
+
+/* see set_fixmap() and asm/fixmap.h */
+#define	CO_CPU_VADDR		(fix_to_virt(FIX_CO_CPU))
+#define	CO_APIC_VADDR		(fix_to_virt(FIX_CO_APIC))
+
+/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
+#define	CO_CPU_REV		0x08
+#define	CO_CPU_CTRL		0x10
+#define	CO_CPU_STAT		0x20
+#define	CO_CPU_TIMEVAL		0x30
+
+/* CO_CPU_CTRL bits */
+#define	CO_CTRL_TIMERUN		0x04		/* 0 == disabled */
+#define	CO_CTRL_TIMEMASK	0x08		/* 0 == unmasked */
+
+/* CO_CPU_STATUS bits */
+#define	CO_STAT_TIMEINTR	0x02	/* (r) 1 == int pend, (w) 0 == clear */
+
+/* CO_CPU_TIMEVAL value */
+#define	CO_TIME_HZ		100000000	/* Cobalt core rate */
+
+/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
+#define	CO_APIC_HI(n)		(((n) * 0x10) + 4)
+#define	CO_APIC_LO(n)		((n) * 0x10)
+#define	CO_APIC_ID		0x0ffc
+
+/* CO_APIC_ID bits */
+#define	CO_APIC_ENABLE		0x00000100
+
+/* CO_APIC_LO bits */
+#define	CO_APIC_MASK		0x00010000	/* 0 = enabled */
+#define	CO_APIC_LEVEL		0x00008000	/* 0 = edge */
+
+/*
+ * Where things are physically wired to Cobalt
+ * #defines with no board _<type>_<rev>_ are common to all (thus far)
+ */
+#define	CO_APIC_IDE0		4
+#define CO_APIC_IDE1		2		/* Only on 320 */
+
+#define	CO_APIC_8259		12		/* serial, floppy, par-l-l */
+
+/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
+#define	CO_APIC_PCIA_BASE0	0 /* and 1 */	/* slot 0, line 0 */
+#define	CO_APIC_PCIA_BASE123	5 /* and 6 */	/* slot 0, line 1 */
+
+#define	CO_APIC_PIIX4_USB	7		/* this one is weird */
+
+/* Lithium PCI Bridge B -- "the one with PIIX4" */
+#define	CO_APIC_PCIB_BASE0	8 /* and 9-12 *//* slot 0, line 0 */
+#define	CO_APIC_PCIB_BASE123	13 /* 14.15 */	/* slot 0, line 1 */
+
+#define	CO_APIC_VIDOUT0		16
+#define	CO_APIC_VIDOUT1		17
+#define	CO_APIC_VIDIN0		18
+#define	CO_APIC_VIDIN1		19
+
+#define	CO_APIC_LI_AUDIO	22
+
+#define	CO_APIC_AS		24
+#define	CO_APIC_RE		25
+
+#define CO_APIC_CPU		28		/* Timer and Cache interrupt */
+#define	CO_APIC_NMI		29
+#define	CO_APIC_LAST		CO_APIC_NMI
+
+/*
+ * This is how irqs are assigned on the Visual Workstation.
+ * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
+ * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
+ */
+#define	CO_IRQ_APIC0	16			/* irq of apic entry 0 */
+#define	IS_CO_APIC(irq)	((irq) >= CO_IRQ_APIC0)
+#define	CO_IRQ(apic)	(CO_IRQ_APIC0 + (apic))	/* apic ent to irq */
+#define	CO_APIC(irq)	((irq) - CO_IRQ_APIC0)	/* irq to apic ent */
+#define CO_IRQ_IDE0	14			/* knowledge of... */
+#define CO_IRQ_IDE1	15			/* ... ide driver defaults! */
+#define	CO_IRQ_8259	CO_IRQ(CO_APIC_8259)
+
+#ifdef CONFIG_X86_VISWS_APIC
+static inline void co_cpu_write(unsigned long reg, unsigned long v)
+{
+	*((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
+}
+
+static inline unsigned long co_cpu_read(unsigned long reg)
+{
+	return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
+}            
+             
+static inline void co_apic_write(unsigned long reg, unsigned long v)
+{
+	*((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
+}            
+             
+static inline unsigned long co_apic_read(unsigned long reg)
+{
+	return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
+}
+#endif
+
+extern char visws_board_type;
+
+#define	VISWS_320	0
+#define	VISWS_540	1
+
+extern char visws_board_rev;
+
+#endif /* _ASM_X86_VISWS_COBALT_H */
diff --git a/arch/x86/include/asm/visws/lithium.h b/arch/x86/include/asm/visws/lithium.h
new file mode 100644
index 0000000..a10d89b
--- /dev/null
+++ b/arch/x86/include/asm/visws/lithium.h
@@ -0,0 +1,53 @@
+#ifndef _ASM_X86_VISWS_LITHIUM_H
+#define _ASM_X86_VISWS_LITHIUM_H
+
+#include <asm/fixmap.h>
+
+/*
+ * Lithium is the SGI Visual Workstation I/O ASIC
+ */
+
+#define	LI_PCI_A_PHYS		0xfc000000	/* Enet is dev 3 */
+#define	LI_PCI_B_PHYS		0xfd000000	/* PIIX4 is here */
+
+/* see set_fixmap() and asm/fixmap.h */
+#define LI_PCIA_VADDR   (fix_to_virt(FIX_LI_PCIA))
+#define LI_PCIB_VADDR   (fix_to_virt(FIX_LI_PCIB))
+
+/* Not a standard PCI? (not in linux/pci.h) */
+#define	LI_PCI_BUSNUM	0x44			/* lo8: primary, hi8: sub */
+#define LI_PCI_INTEN    0x46
+
+/* LI_PCI_INTENT bits */
+#define	LI_INTA_0	0x0001
+#define	LI_INTA_1	0x0002
+#define	LI_INTA_2	0x0004
+#define	LI_INTA_3	0x0008
+#define	LI_INTA_4	0x0010
+#define	LI_INTB		0x0020
+#define	LI_INTC		0x0040
+#define	LI_INTD		0x0080
+
+/* More special purpose macros... */
+static inline void li_pcia_write16(unsigned long reg, unsigned short v)
+{
+	*((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
+}
+
+static inline unsigned short li_pcia_read16(unsigned long reg)
+{
+	 return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
+}
+
+static inline void li_pcib_write16(unsigned long reg, unsigned short v)
+{
+	*((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
+}
+
+static inline unsigned short li_pcib_read16(unsigned long reg)
+{
+	return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
+}
+
+#endif /* _ASM_X86_VISWS_LITHIUM_H */
+
diff --git a/arch/x86/include/asm/visws/piix4.h b/arch/x86/include/asm/visws/piix4.h
new file mode 100644
index 0000000..d0af4d3
--- /dev/null
+++ b/arch/x86/include/asm/visws/piix4.h
@@ -0,0 +1,107 @@
+#ifndef _ASM_X86_VISWS_PIIX4_H
+#define _ASM_X86_VISWS_PIIX4_H
+
+/*
+ * PIIX4 as used on SGI Visual Workstations
+ */
+
+#define	PIIX_PM_START		0x0F80
+
+#define	SIO_GPIO_START		0x0FC0
+
+#define	SIO_PM_START		0x0FC8
+
+#define	PMBASE			PIIX_PM_START
+#define	GPIREG0			(PMBASE+0x30)
+#define	GPIREG(x)		(GPIREG0+((x)/8))
+#define	GPIBIT(x)		(1 << ((x)%8))
+
+#define	PIIX_GPI_BD_ID1		18
+#define	PIIX_GPI_BD_ID2		19
+#define	PIIX_GPI_BD_ID3		20
+#define	PIIX_GPI_BD_ID4		21
+#define	PIIX_GPI_BD_REG		GPIREG(PIIX_GPI_BD_ID1)
+#define	PIIX_GPI_BD_MASK	(GPIBIT(PIIX_GPI_BD_ID1) | \
+				GPIBIT(PIIX_GPI_BD_ID2) | \
+				GPIBIT(PIIX_GPI_BD_ID3) | \
+				GPIBIT(PIIX_GPI_BD_ID4) )
+
+#define	PIIX_GPI_BD_SHIFT	(PIIX_GPI_BD_ID1 % 8)
+
+#define	SIO_INDEX		0x2e
+#define	SIO_DATA		0x2f
+
+#define	SIO_DEV_SEL		0x7
+#define	SIO_DEV_ENB		0x30
+#define	SIO_DEV_MSB		0x60
+#define	SIO_DEV_LSB		0x61
+
+#define	SIO_GP_DEV		0x7
+
+#define	SIO_GP_BASE		SIO_GPIO_START
+#define	SIO_GP_MSB		(SIO_GP_BASE>>8)
+#define	SIO_GP_LSB		(SIO_GP_BASE&0xff)
+
+#define	SIO_GP_DATA1		(SIO_GP_BASE+0)
+
+#define	SIO_PM_DEV		0x8
+
+#define	SIO_PM_BASE		SIO_PM_START
+#define	SIO_PM_MSB		(SIO_PM_BASE>>8)
+#define	SIO_PM_LSB		(SIO_PM_BASE&0xff)
+#define	SIO_PM_INDEX		(SIO_PM_BASE+0)
+#define	SIO_PM_DATA		(SIO_PM_BASE+1)
+
+#define	SIO_PM_FER2		0x1
+
+#define	SIO_PM_GP_EN		0x80
+
+
+
+/*
+ * This is the dev/reg where generating a config cycle will
+ * result in a PCI special cycle.
+ */
+#define SPECIAL_DEV		0xff
+#define SPECIAL_REG		0x00
+
+/*
+ * PIIX4 needs to see a special cycle with the following data
+ * to be convinced the processor has gone into the stop grant
+ * state.  PIIX4 insists on seeing this before it will power
+ * down a system.
+ */
+#define PIIX_SPECIAL_STOP		0x00120002
+
+#define PIIX4_RESET_PORT	0xcf9
+#define PIIX4_RESET_VAL		0x6
+
+#define PMSTS_PORT		0xf80	// 2 bytes	PM Status
+#define PMEN_PORT		0xf82	// 2 bytes	PM Enable
+#define	PMCNTRL_PORT		0xf84	// 2 bytes	PM Control
+
+#define PM_SUSPEND_ENABLE	0x2000	// start sequence to suspend state
+
+/*
+ * PMSTS and PMEN I/O bit definitions.
+ * (Bits are the same in both registers)
+ */
+#define PM_STS_RSM		(1<<15)	// Resume Status
+#define PM_STS_PWRBTNOR		(1<<11)	// Power Button Override
+#define PM_STS_RTC		(1<<10)	// RTC status
+#define PM_STS_PWRBTN		(1<<8)	// Power Button Pressed?
+#define PM_STS_GBL		(1<<5)	// Global Status
+#define PM_STS_BM		(1<<4)	// Bus Master Status
+#define PM_STS_TMROF		(1<<0)	// Timer Overflow Status.
+
+/*
+ * Stop clock GPI register
+ */
+#define PIIX_GPIREG0			(0xf80 + 0x30)
+
+/*
+ * Stop clock GPI bit in GPIREG0
+ */
+#define	PIIX_GPI_STPCLK		0x4	// STPCLK signal routed back in
+
+#endif /* _ASM_X86_VISWS_PIIX4_H */
diff --git a/arch/x86/include/asm/visws/sgivw.h b/arch/x86/include/asm/visws/sgivw.h
new file mode 100644
index 0000000..5fbf63e
--- /dev/null
+++ b/arch/x86/include/asm/visws/sgivw.h
@@ -0,0 +1,5 @@
+/*
+ * Frame buffer position and size:
+ */
+extern unsigned long sgivwfb_mem_phys;
+extern unsigned long sgivwfb_mem_size;
diff --git a/arch/x86/include/asm/vm86.h b/arch/x86/include/asm/vm86.h
new file mode 100644
index 0000000..f930360
--- /dev/null
+++ b/arch/x86/include/asm/vm86.h
@@ -0,0 +1,208 @@
+#ifndef _ASM_X86_VM86_H
+#define _ASM_X86_VM86_H
+
+/*
+ * I'm guessing at the VIF/VIP flag usage, but hope that this is how
+ * the Pentium uses them. Linux will return from vm86 mode when both
+ * VIF and VIP is set.
+ *
+ * On a Pentium, we could probably optimize the virtual flags directly
+ * in the eflags register instead of doing it "by hand" in vflags...
+ *
+ * Linus
+ */
+
+#include <asm/processor-flags.h>
+
+#define BIOSSEG		0x0f000
+
+#define CPU_086		0
+#define CPU_186		1
+#define CPU_286		2
+#define CPU_386		3
+#define CPU_486		4
+#define CPU_586		5
+
+/*
+ * Return values for the 'vm86()' system call
+ */
+#define VM86_TYPE(retval)	((retval) & 0xff)
+#define VM86_ARG(retval)	((retval) >> 8)
+
+#define VM86_SIGNAL	0	/* return due to signal */
+#define VM86_UNKNOWN	1	/* unhandled GP fault
+				   - IO-instruction or similar */
+#define VM86_INTx	2	/* int3/int x instruction (ARG = x) */
+#define VM86_STI	3	/* sti/popf/iret instruction enabled
+				   virtual interrupts */
+
+/*
+ * Additional return values when invoking new vm86()
+ */
+#define VM86_PICRETURN	4	/* return due to pending PIC request */
+#define VM86_TRAP	6	/* return due to DOS-debugger request */
+
+/*
+ * function codes when invoking new vm86()
+ */
+#define VM86_PLUS_INSTALL_CHECK	0
+#define VM86_ENTER		1
+#define VM86_ENTER_NO_BYPASS	2
+#define	VM86_REQUEST_IRQ	3
+#define VM86_FREE_IRQ		4
+#define VM86_GET_IRQ_BITS	5
+#define VM86_GET_AND_RESET_IRQ	6
+
+/*
+ * This is the stack-layout seen by the user space program when we have
+ * done a translation of "SAVE_ALL" from vm86 mode. The real kernel layout
+ * is 'kernel_vm86_regs' (see below).
+ */
+
+struct vm86_regs {
+/*
+ * normal regs, with special meaning for the segment descriptors..
+ */
+	long ebx;
+	long ecx;
+	long edx;
+	long esi;
+	long edi;
+	long ebp;
+	long eax;
+	long __null_ds;
+	long __null_es;
+	long __null_fs;
+	long __null_gs;
+	long orig_eax;
+	long eip;
+	unsigned short cs, __csh;
+	long eflags;
+	long esp;
+	unsigned short ss, __ssh;
+/*
+ * these are specific to v86 mode:
+ */
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned short fs, __fsh;
+	unsigned short gs, __gsh;
+};
+
+struct revectored_struct {
+	unsigned long __map[8];			/* 256 bits */
+};
+
+struct vm86_struct {
+	struct vm86_regs regs;
+	unsigned long flags;
+	unsigned long screen_bitmap;
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+};
+
+/*
+ * flags masks
+ */
+#define VM86_SCREEN_BITMAP	0x0001
+
+struct vm86plus_info_struct {
+	unsigned long force_return_for_pic:1;
+	unsigned long vm86dbg_active:1;       /* for debugger */
+	unsigned long vm86dbg_TFpendig:1;     /* for debugger */
+	unsigned long unused:28;
+	unsigned long is_vm86pus:1;	      /* for vm86 internal use */
+	unsigned char vm86dbg_intxxtab[32];   /* for debugger */
+};
+struct vm86plus_struct {
+	struct vm86_regs regs;
+	unsigned long flags;
+	unsigned long screen_bitmap;
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+	struct vm86plus_info_struct vm86plus;
+};
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
+/*
+ * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86
+ * mode - the main change is that the old segment descriptors aren't
+ * useful any more and are forced to be zero by the kernel (and the
+ * hardware when a trap occurs), and the real segment descriptors are
+ * at the end of the structure. Look at ptrace.h to see the "normal"
+ * setup. For user space layout see 'struct vm86_regs' above.
+ */
+
+struct kernel_vm86_regs {
+/*
+ * normal regs, with special meaning for the segment descriptors..
+ */
+	struct pt_regs pt;
+/*
+ * these are specific to v86 mode:
+ */
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned short fs, __fsh;
+	unsigned short gs, __gsh;
+};
+
+struct kernel_vm86_struct {
+	struct kernel_vm86_regs regs;
+/*
+ * the below part remains on the kernel stack while we are in VM86 mode.
+ * 'tss.esp0' then contains the address of VM86_TSS_ESP0 below, and when we
+ * get forced back from VM86, the CPU and "SAVE_ALL" will restore the above
+ * 'struct kernel_vm86_regs' with the then actual values.
+ * Therefore, pt_regs in fact points to a complete 'kernel_vm86_struct'
+ * in kernelspace, hence we need not reget the data from userspace.
+ */
+#define VM86_TSS_ESP0 flags
+	unsigned long flags;
+	unsigned long screen_bitmap;
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+	struct vm86plus_info_struct vm86plus;
+	struct pt_regs *regs32;   /* here we save the pointer to the old regs */
+/*
+ * The below is not part of the structure, but the stack layout continues
+ * this way. In front of 'return-eip' may be some data, depending on
+ * compilation, so we don't rely on this and save the pointer to 'oldregs'
+ * in 'regs32' above.
+ * However, with GCC-2.7.2 and the current CFLAGS you see exactly this:
+
+	long return-eip;        from call to vm86()
+	struct pt_regs oldregs;  user space registers as saved by syscall
+ */
+};
+
+#ifdef CONFIG_VM86
+
+void handle_vm86_fault(struct kernel_vm86_regs *, long);
+int handle_vm86_trap(struct kernel_vm86_regs *, long, int);
+struct pt_regs *save_v86_state(struct kernel_vm86_regs *);
+
+struct task_struct;
+void release_vm86_irqs(struct task_struct *);
+
+#else
+
+#define handle_vm86_fault(a, b)
+#define release_vm86_irqs(a)
+
+static inline int handle_vm86_trap(struct kernel_vm86_regs *a, long b, int c)
+{
+	return 0;
+}
+
+#endif /* CONFIG_VM86 */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_VM86_H */
diff --git a/arch/x86/include/asm/vmi.h b/arch/x86/include/asm/vmi.h
new file mode 100644
index 0000000..b7c0dea
--- /dev/null
+++ b/arch/x86/include/asm/vmi.h
@@ -0,0 +1,263 @@
+/*
+ * VMI interface definition
+ *
+ * Copyright (C) 2005, VMware, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Maintained by: Zachary Amsden zach@vmware.com
+ *
+ */
+#include <linux/types.h>
+
+/*
+ *---------------------------------------------------------------------
+ *
+ *  VMI Option ROM API
+ *
+ *---------------------------------------------------------------------
+ */
+#define VMI_SIGNATURE 0x696d5663   /* "cVmi" */
+
+#define PCI_VENDOR_ID_VMWARE            0x15AD
+#define PCI_DEVICE_ID_VMWARE_VMI        0x0801
+
+/*
+ * We use two version numbers for compatibility, with the major
+ * number signifying interface breakages, and the minor number
+ * interface extensions.
+ */
+#define VMI_API_REV_MAJOR       3
+#define VMI_API_REV_MINOR       0
+
+#define VMI_CALL_CPUID			0
+#define VMI_CALL_WRMSR			1
+#define VMI_CALL_RDMSR			2
+#define VMI_CALL_SetGDT			3
+#define VMI_CALL_SetLDT			4
+#define VMI_CALL_SetIDT			5
+#define VMI_CALL_SetTR			6
+#define VMI_CALL_GetGDT			7
+#define VMI_CALL_GetLDT			8
+#define VMI_CALL_GetIDT			9
+#define VMI_CALL_GetTR			10
+#define VMI_CALL_WriteGDTEntry		11
+#define VMI_CALL_WriteLDTEntry		12
+#define VMI_CALL_WriteIDTEntry		13
+#define VMI_CALL_UpdateKernelStack	14
+#define VMI_CALL_SetCR0			15
+#define VMI_CALL_SetCR2			16
+#define VMI_CALL_SetCR3			17
+#define VMI_CALL_SetCR4			18
+#define VMI_CALL_GetCR0			19
+#define VMI_CALL_GetCR2			20
+#define VMI_CALL_GetCR3			21
+#define VMI_CALL_GetCR4			22
+#define VMI_CALL_WBINVD			23
+#define VMI_CALL_SetDR			24
+#define VMI_CALL_GetDR			25
+#define VMI_CALL_RDPMC			26
+#define VMI_CALL_RDTSC			27
+#define VMI_CALL_CLTS			28
+#define VMI_CALL_EnableInterrupts	29
+#define VMI_CALL_DisableInterrupts	30
+#define VMI_CALL_GetInterruptMask	31
+#define VMI_CALL_SetInterruptMask	32
+#define VMI_CALL_IRET			33
+#define VMI_CALL_SYSEXIT		34
+#define VMI_CALL_Halt			35
+#define VMI_CALL_Reboot			36
+#define VMI_CALL_Shutdown		37
+#define VMI_CALL_SetPxE			38
+#define VMI_CALL_SetPxELong		39
+#define VMI_CALL_UpdatePxE		40
+#define VMI_CALL_UpdatePxELong		41
+#define VMI_CALL_MachineToPhysical	42
+#define VMI_CALL_PhysicalToMachine	43
+#define VMI_CALL_AllocatePage		44
+#define VMI_CALL_ReleasePage		45
+#define VMI_CALL_InvalPage		46
+#define VMI_CALL_FlushTLB		47
+#define VMI_CALL_SetLinearMapping	48
+
+#define VMI_CALL_SetIOPLMask		61
+#define VMI_CALL_SetInitialAPState	62
+#define VMI_CALL_APICWrite		63
+#define VMI_CALL_APICRead		64
+#define VMI_CALL_IODelay		65
+#define VMI_CALL_SetLazyMode		73
+
+/*
+ *---------------------------------------------------------------------
+ *
+ * MMU operation flags
+ *
+ *---------------------------------------------------------------------
+ */
+
+/* Flags used by VMI_{Allocate|Release}Page call */
+#define VMI_PAGE_PAE             0x10  /* Allocate PAE shadow */
+#define VMI_PAGE_CLONE           0x20  /* Clone from another shadow */
+#define VMI_PAGE_ZEROED          0x40  /* Page is pre-zeroed */
+
+
+/* Flags shared by Allocate|Release Page and PTE updates */
+#define VMI_PAGE_PT              0x01
+#define VMI_PAGE_PD              0x02
+#define VMI_PAGE_PDP             0x04
+#define VMI_PAGE_PML4            0x08
+
+#define VMI_PAGE_NORMAL          0x00 /* for debugging */
+
+/* Flags used by PTE updates */
+#define VMI_PAGE_CURRENT_AS      0x10 /* implies VMI_PAGE_VA_MASK is valid */
+#define VMI_PAGE_DEFER           0x20 /* may queue update until TLB inval */
+#define VMI_PAGE_VA_MASK         0xfffff000
+
+#ifdef CONFIG_X86_PAE
+#define VMI_PAGE_L1		(VMI_PAGE_PT | VMI_PAGE_PAE | VMI_PAGE_ZEROED)
+#define VMI_PAGE_L2		(VMI_PAGE_PD | VMI_PAGE_PAE | VMI_PAGE_ZEROED)
+#else
+#define VMI_PAGE_L1		(VMI_PAGE_PT | VMI_PAGE_ZEROED)
+#define VMI_PAGE_L2		(VMI_PAGE_PD | VMI_PAGE_ZEROED)
+#endif
+
+/* Flags used by VMI_FlushTLB call */
+#define VMI_FLUSH_TLB            0x01
+#define VMI_FLUSH_GLOBAL         0x02
+
+/*
+ *---------------------------------------------------------------------
+ *
+ *  VMI relocation definitions for ROM call get_reloc
+ *
+ *---------------------------------------------------------------------
+ */
+
+/* VMI Relocation types */
+#define VMI_RELOCATION_NONE     0
+#define VMI_RELOCATION_CALL_REL 1
+#define VMI_RELOCATION_JUMP_REL 2
+#define VMI_RELOCATION_NOP	3
+
+#ifndef __ASSEMBLY__
+struct vmi_relocation_info {
+	unsigned char           *eip;
+	unsigned char           type;
+	unsigned char           reserved[3];
+};
+#endif
+
+
+/*
+ *---------------------------------------------------------------------
+ *
+ *  Generic ROM structures and definitions
+ *
+ *---------------------------------------------------------------------
+ */
+
+#ifndef __ASSEMBLY__
+
+struct vrom_header {
+	u16     rom_signature;  /* option ROM signature */
+	u8      rom_length;     /* ROM length in 512 byte chunks */
+	u8      rom_entry[4];   /* 16-bit code entry point */
+	u8      rom_pad0;       /* 4-byte align pad */
+	u32     vrom_signature; /* VROM identification signature */
+	u8      api_version_min;/* Minor version of API */
+	u8      api_version_maj;/* Major version of API */
+	u8      jump_slots;     /* Number of jump slots */
+	u8      reserved1;      /* Reserved for expansion */
+	u32     virtual_top;    /* Hypervisor virtual address start */
+	u16     reserved2;      /* Reserved for expansion */
+	u16	license_offs;	/* Offset to License string */
+	u16     pci_header_offs;/* Offset to PCI OPROM header */
+	u16     pnp_header_offs;/* Offset to PnP OPROM header */
+	u32     rom_pad3;       /* PnP reserverd / VMI reserved */
+	u8      reserved[96];   /* Reserved for headers */
+	char    vmi_init[8];    /* VMI_Init jump point */
+	char    get_reloc[8];   /* VMI_GetRelocationInfo jump point */
+} __attribute__((packed));
+
+struct pnp_header {
+	char sig[4];
+	char rev;
+	char size;
+	short next;
+	short res;
+	long devID;
+	unsigned short manufacturer_offset;
+	unsigned short product_offset;
+} __attribute__((packed));
+
+struct pci_header {
+	char sig[4];
+	short vendorID;
+	short deviceID;
+	short vpdData;
+	short size;
+	char rev;
+	char class;
+	char subclass;
+	char interface;
+	short chunks;
+	char rom_version_min;
+	char rom_version_maj;
+	char codetype;
+	char lastRom;
+	short reserved;
+} __attribute__((packed));
+
+/* Function prototypes for bootstrapping */
+extern void vmi_init(void);
+extern void vmi_bringup(void);
+extern void vmi_apply_boot_page_allocations(void);
+
+/* State needed to start an application processor in an SMP system. */
+struct vmi_ap_state {
+	u32 cr0;
+	u32 cr2;
+	u32 cr3;
+	u32 cr4;
+
+	u64 efer;
+
+	u32 eip;
+	u32 eflags;
+	u32 eax;
+	u32 ebx;
+	u32 ecx;
+	u32 edx;
+	u32 esp;
+	u32 ebp;
+	u32 esi;
+	u32 edi;
+	u16 cs;
+	u16 ss;
+	u16 ds;
+	u16 es;
+	u16 fs;
+	u16 gs;
+	u16 ldtr;
+
+	u16 gdtr_limit;
+	u32 gdtr_base;
+	u32 idtr_base;
+	u16 idtr_limit;
+};
+
+#endif
diff --git a/arch/x86/include/asm/vmi_time.h b/arch/x86/include/asm/vmi_time.h
new file mode 100644
index 0000000..c6e0bee
--- /dev/null
+++ b/arch/x86/include/asm/vmi_time.h
@@ -0,0 +1,98 @@
+/*
+ * VMI Time wrappers
+ *
+ * Copyright (C) 2006, VMware, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to dhecht@vmware.com
+ *
+ */
+
+#ifndef _ASM_X86_VMI_TIME_H
+#define _ASM_X86_VMI_TIME_H
+
+/*
+ * Raw VMI call indices for timer functions
+ */
+#define VMI_CALL_GetCycleFrequency	66
+#define VMI_CALL_GetCycleCounter	67
+#define VMI_CALL_SetAlarm		68
+#define VMI_CALL_CancelAlarm		69
+#define VMI_CALL_GetWallclockTime	70
+#define VMI_CALL_WallclockUpdated	71
+
+/* Cached VMI timer operations */
+extern struct vmi_timer_ops {
+	u64 (*get_cycle_frequency)(void);
+	u64 (*get_cycle_counter)(int);
+	u64 (*get_wallclock)(void);
+	int (*wallclock_updated)(void);
+	void (*set_alarm)(u32 flags, u64 expiry, u64 period);
+	void (*cancel_alarm)(u32 flags);
+} vmi_timer_ops;
+
+/* Prototypes */
+extern void __init vmi_time_init(void);
+extern unsigned long vmi_get_wallclock(void);
+extern int vmi_set_wallclock(unsigned long now);
+extern unsigned long long vmi_sched_clock(void);
+extern unsigned long vmi_tsc_khz(void);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+extern void __devinit vmi_time_bsp_init(void);
+extern void __devinit vmi_time_ap_init(void);
+#endif
+
+/*
+ * When run under a hypervisor, a vcpu is always in one of three states:
+ * running, halted, or ready.  The vcpu is in the 'running' state if it
+ * is executing.  When the vcpu executes the halt interface, the vcpu
+ * enters the 'halted' state and remains halted until there is some work
+ * pending for the vcpu (e.g. an alarm expires, host I/O completes on
+ * behalf of virtual I/O).  At this point, the vcpu enters the 'ready'
+ * state (waiting for the hypervisor to reschedule it).  Finally, at any
+ * time when the vcpu is not in the 'running' state nor the 'halted'
+ * state, it is in the 'ready' state.
+ *
+ * Real time is advances while the vcpu is 'running', 'ready', or
+ * 'halted'.  Stolen time is the time in which the vcpu is in the
+ * 'ready' state.  Available time is the remaining time -- the vcpu is
+ * either 'running' or 'halted'.
+ *
+ * All three views of time are accessible through the VMI cycle
+ * counters.
+ */
+
+/* The cycle counters. */
+#define VMI_CYCLES_REAL         0
+#define VMI_CYCLES_AVAILABLE    1
+#define VMI_CYCLES_STOLEN       2
+
+/* The alarm interface 'flags' bits */
+#define VMI_ALARM_COUNTERS      2
+
+#define VMI_ALARM_COUNTER_MASK  0x000000ff
+
+#define VMI_ALARM_WIRED_IRQ0    0x00000000
+#define VMI_ALARM_WIRED_LVTT    0x00010000
+
+#define VMI_ALARM_IS_ONESHOT    0x00000000
+#define VMI_ALARM_IS_PERIODIC   0x00000100
+
+#define CONFIG_VMI_ALARM_HZ	100
+
+#endif /* _ASM_X86_VMI_TIME_H */
diff --git a/arch/x86/include/asm/voyager.h b/arch/x86/include/asm/voyager.h
new file mode 100644
index 0000000..9c811d2
--- /dev/null
+++ b/arch/x86/include/asm/voyager.h
@@ -0,0 +1,528 @@
+/* Copyright (C) 1999,2001
+ *
+ * Author: J.E.J.Bottomley@HansenPartnership.com
+ *
+ * Standard include definitions for the NCR Voyager system */
+
+#undef	VOYAGER_DEBUG
+#undef	VOYAGER_CAT_DEBUG
+
+#ifdef VOYAGER_DEBUG
+#define VDEBUG(x)	printk x
+#else
+#define VDEBUG(x)
+#endif
+
+/* There are three levels of voyager machine: 3,4 and 5. The rule is
+ * if it's less than 3435 it's a Level 3 except for a 3360 which is
+ * a level 4.  A 3435 or above is a Level 5 */
+#define VOYAGER_LEVEL5_AND_ABOVE	0x3435
+#define VOYAGER_LEVEL4			0x3360
+
+/* The L4 DINO ASIC */
+#define VOYAGER_DINO			0x43
+
+/* voyager ports in standard I/O space */
+#define VOYAGER_MC_SETUP	0x96
+
+
+#define	VOYAGER_CAT_CONFIG_PORT			0x97
+#	define VOYAGER_CAT_DESELECT		0xff
+#define VOYAGER_SSPB_RELOCATION_PORT		0x98
+
+/* Valid CAT controller commands */
+/* start instruction register cycle */
+#define VOYAGER_CAT_IRCYC			0x01
+/* start data register cycle */
+#define VOYAGER_CAT_DRCYC			0x02
+/* move to execute state */
+#define VOYAGER_CAT_RUN				0x0F
+/* end operation */
+#define VOYAGER_CAT_END				0x80
+/* hold in idle state */
+#define VOYAGER_CAT_HOLD			0x90
+/* single step an "intest" vector */
+#define VOYAGER_CAT_STEP			0xE0
+/* return cat controller to CLEMSON mode */
+#define VOYAGER_CAT_CLEMSON			0xFF
+
+/* the default cat command header */
+#define VOYAGER_CAT_HEADER			0x7F
+
+/* the range of possible CAT module ids in the system */
+#define VOYAGER_MIN_MODULE			0x10
+#define VOYAGER_MAX_MODULE			0x1f
+
+/* The voyager registers per asic */
+#define VOYAGER_ASIC_ID_REG			0x00
+#define VOYAGER_ASIC_TYPE_REG			0x01
+/* the sub address registers can be made auto incrementing on reads */
+#define VOYAGER_AUTO_INC_REG			0x02
+#	define VOYAGER_AUTO_INC			0x04
+#	define VOYAGER_NO_AUTO_INC		0xfb
+#define VOYAGER_SUBADDRDATA			0x03
+#define VOYAGER_SCANPATH			0x05
+#	define VOYAGER_CONNECT_ASIC		0x01
+#	define VOYAGER_DISCONNECT_ASIC		0xfe
+#define VOYAGER_SUBADDRLO			0x06
+#define VOYAGER_SUBADDRHI			0x07
+#define VOYAGER_SUBMODSELECT			0x08
+#define VOYAGER_SUBMODPRESENT			0x09
+
+#define VOYAGER_SUBADDR_LO			0xff
+#define VOYAGER_SUBADDR_HI			0xffff
+
+/* the maximum size of a scan path -- used to form instructions */
+#define VOYAGER_MAX_SCAN_PATH			0x100
+/* the biggest possible register size (in bytes) */
+#define VOYAGER_MAX_REG_SIZE			4
+
+/* Total number of possible modules (including submodules) */
+#define VOYAGER_MAX_MODULES			16
+/* Largest number of asics per module */
+#define VOYAGER_MAX_ASICS_PER_MODULE		7
+
+/* the CAT asic of each module is always the first one */
+#define VOYAGER_CAT_ID				0
+#define VOYAGER_PSI				0x1a
+
+/* voyager instruction operations and registers */
+#define VOYAGER_READ_CONFIG			0x1
+#define VOYAGER_WRITE_CONFIG			0x2
+#define VOYAGER_BYPASS				0xff
+
+typedef struct voyager_asic {
+	__u8	asic_addr;	/* ASIC address; Level 4 */
+	__u8	asic_type;      /* ASIC type */
+	__u8	asic_id;	/* ASIC id */
+	__u8	jtag_id[4];	/* JTAG id */
+	__u8	asic_location;	/* Location within scan path; start w/ 0 */
+	__u8	bit_location;	/* Location within bit stream; start w/ 0 */
+	__u8	ireg_length;	/* Instruction register length */
+	__u16	subaddr;	/* Amount of sub address space */
+	struct voyager_asic *next;	/* Next asic in linked list */
+} voyager_asic_t;
+
+typedef struct voyager_module {
+	__u8	module_addr;		/* Module address */
+	__u8	scan_path_connected;	/* Scan path connected */
+	__u16   ee_size;		/* Size of the EEPROM */
+	__u16   num_asics;		/* Number of Asics */
+	__u16   inst_bits;		/* Instruction bits in the scan path */
+	__u16   largest_reg;		/* Largest register in the scan path */
+	__u16   smallest_reg;		/* Smallest register in the scan path */
+	voyager_asic_t   *asic;		/* First ASIC in scan path (CAT_I) */
+	struct   voyager_module *submodule;	/* Submodule pointer */
+	struct   voyager_module *next;		/* Next module in linked list */
+} voyager_module_t;
+
+typedef struct voyager_eeprom_hdr {
+	 __u8  module_id[4];
+	 __u8  version_id;
+	 __u8  config_id;
+	 __u16 boundry_id;	/* boundary scan id */
+	 __u16 ee_size;		/* size of EEPROM */
+	 __u8  assembly[11];	/* assembly # */
+	 __u8  assembly_rev;	/* assembly rev */
+	 __u8  tracer[4];	/* tracer number */
+	 __u16 assembly_cksum;	/* asm checksum */
+	 __u16 power_consump;	/* pwr requirements */
+	 __u16 num_asics;	/* number of asics */
+	 __u16 bist_time;	/* min. bist time */
+	 __u16 err_log_offset;	/* error log offset */
+	 __u16 scan_path_offset;/* scan path offset */
+	 __u16 cct_offset;
+	 __u16 log_length;	/* length of err log */
+	 __u16 xsum_end;	/* offset to end of
+				   checksum */
+	 __u8  reserved[4];
+	 __u8  sflag;		/* starting sentinal */
+	 __u8  part_number[13];	/* prom part number */
+	 __u8  version[10];	/* version number */
+	 __u8  signature[8];
+	 __u16 eeprom_chksum;
+	 __u32  data_stamp_offset;
+	 __u8  eflag ;		 /* ending sentinal */
+} __attribute__((packed)) voyager_eprom_hdr_t;
+
+
+
+#define VOYAGER_EPROM_SIZE_OFFSET				\
+	((__u16)(&(((voyager_eprom_hdr_t *)0)->ee_size)))
+#define VOYAGER_XSUM_END_OFFSET		0x2a
+
+/* the following three definitions are for internal table layouts
+ * in the module EPROMs.  We really only care about the IDs and
+ * offsets */
+typedef struct voyager_sp_table {
+	__u8 asic_id;
+	__u8 bypass_flag;
+	__u16 asic_data_offset;
+	__u16 config_data_offset;
+} __attribute__((packed)) voyager_sp_table_t;
+
+typedef struct voyager_jtag_table {
+	__u8 icode[4];
+	__u8 runbist[4];
+	__u8 intest[4];
+	__u8 samp_preld[4];
+	__u8 ireg_len;
+} __attribute__((packed)) voyager_jtt_t;
+
+typedef struct voyager_asic_data_table {
+	__u8 jtag_id[4];
+	__u16 length_bsr;
+	__u16 length_bist_reg;
+	__u32 bist_clk;
+	__u16 subaddr_bits;
+	__u16 seed_bits;
+	__u16 sig_bits;
+	__u16 jtag_offset;
+} __attribute__((packed)) voyager_at_t;
+
+/* Voyager Interrupt Controller (VIC) registers */
+
+/* Base to add to Cross Processor Interrupts (CPIs) when triggering
+ * the CPU IRQ line */
+/* register defines for the WCBICs (one per processor) */
+#define VOYAGER_WCBIC0	0x41		/* bus A node P1 processor 0 */
+#define VOYAGER_WCBIC1	0x49		/* bus A node P1 processor 1 */
+#define VOYAGER_WCBIC2	0x51		/* bus A node P2 processor 0 */
+#define VOYAGER_WCBIC3	0x59		/* bus A node P2 processor 1 */
+#define VOYAGER_WCBIC4	0x61		/* bus B node P1 processor 0 */
+#define VOYAGER_WCBIC5	0x69		/* bus B node P1 processor 1 */
+#define VOYAGER_WCBIC6	0x71		/* bus B node P2 processor 0 */
+#define VOYAGER_WCBIC7	0x79		/* bus B node P2 processor 1 */
+
+
+/* top of memory registers */
+#define VOYAGER_WCBIC_TOM_L	0x4
+#define VOYAGER_WCBIC_TOM_H	0x5
+
+/* register defines for Voyager Memory Contol (VMC)
+ * these are present on L4 machines only */
+#define	VOYAGER_VMC1		0x81
+#define VOYAGER_VMC2		0x91
+#define VOYAGER_VMC3		0xa1
+#define VOYAGER_VMC4		0xb1
+
+/* VMC Ports */
+#define VOYAGER_VMC_MEMORY_SETUP	0x9
+#	define VMC_Interleaving		0x01
+#	define VMC_4Way			0x02
+#	define VMC_EvenCacheLines	0x04
+#	define VMC_HighLine		0x08
+#	define VMC_Start0_Enable	0x20
+#	define VMC_Start1_Enable	0x40
+#	define VMC_Vremap		0x80
+#define VOYAGER_VMC_BANK_DENSITY	0xa
+#	define	VMC_BANK_EMPTY		0
+#	define	VMC_BANK_4MB		1
+#	define	VMC_BANK_16MB		2
+#	define	VMC_BANK_64MB		3
+#	define	VMC_BANK0_MASK		0x03
+#	define	VMC_BANK1_MASK		0x0C
+#	define	VMC_BANK2_MASK		0x30
+#	define	VMC_BANK3_MASK		0xC0
+
+/* Magellan Memory Controller (MMC) defines - present on L5 */
+#define VOYAGER_MMC_ASIC_ID		1
+/* the two memory modules corresponding to memory cards in the system */
+#define VOYAGER_MMC_MEMORY0_MODULE	0x14
+#define VOYAGER_MMC_MEMORY1_MODULE	0x15
+/* the Magellan Memory Address (MMA) defines */
+#define VOYAGER_MMA_ASIC_ID		2
+
+/* Submodule number for the Quad Baseboard */
+#define VOYAGER_QUAD_BASEBOARD		1
+
+/* ASIC defines for the Quad Baseboard */
+#define VOYAGER_QUAD_QDATA0		1
+#define VOYAGER_QUAD_QDATA1		2
+#define VOYAGER_QUAD_QABC		3
+
+/* Useful areas in extended CMOS */
+#define VOYAGER_PROCESSOR_PRESENT_MASK	0x88a
+#define VOYAGER_MEMORY_CLICKMAP		0xa23
+#define VOYAGER_DUMP_LOCATION		0xb1a
+
+/* SUS In Control bit - used to tell SUS that we don't need to be
+ * babysat anymore */
+#define VOYAGER_SUS_IN_CONTROL_PORT	0x3ff
+#	define VOYAGER_IN_CONTROL_FLAG	0x80
+
+/* Voyager PSI defines */
+#define VOYAGER_PSI_STATUS_REG		0x08
+#	define PSI_DC_FAIL		0x01
+#	define PSI_MON			0x02
+#	define PSI_FAULT		0x04
+#	define PSI_ALARM		0x08
+#	define PSI_CURRENT		0x10
+#	define PSI_DVM			0x20
+#	define PSI_PSCFAULT		0x40
+#	define PSI_STAT_CHG		0x80
+
+#define VOYAGER_PSI_SUPPLY_REG		0x8000
+	/* read */
+#	define PSI_FAIL_DC		0x01
+#	define PSI_FAIL_AC		0x02
+#	define PSI_MON_INT		0x04
+#	define PSI_SWITCH_OFF		0x08
+#	define PSI_HX_OFF		0x10
+#	define PSI_SECURITY		0x20
+#	define PSI_CMOS_BATT_LOW	0x40
+#	define PSI_CMOS_BATT_FAIL	0x80
+	/* write */
+#	define PSI_CLR_SWITCH_OFF	0x13
+#	define PSI_CLR_HX_OFF		0x14
+#	define PSI_CLR_CMOS_BATT_FAIL	0x17
+
+#define VOYAGER_PSI_MASK		0x8001
+#	define PSI_MASK_MASK		0x10
+
+#define VOYAGER_PSI_AC_FAIL_REG		0x8004
+#define	AC_FAIL_STAT_CHANGE		0x80
+
+#define VOYAGER_PSI_GENERAL_REG		0x8007
+	/* read */
+#	define PSI_SWITCH_ON		0x01
+#	define PSI_SWITCH_ENABLED	0x02
+#	define PSI_ALARM_ENABLED	0x08
+#	define PSI_SECURE_ENABLED	0x10
+#	define PSI_COLD_RESET		0x20
+#	define PSI_COLD_START		0x80
+	/* write */
+#	define PSI_POWER_DOWN		0x10
+#	define PSI_SWITCH_DISABLE	0x01
+#	define PSI_SWITCH_ENABLE	0x11
+#	define PSI_CLEAR		0x12
+#	define PSI_ALARM_DISABLE	0x03
+#	define PSI_ALARM_ENABLE		0x13
+#	define PSI_CLEAR_COLD_RESET	0x05
+#	define PSI_SET_COLD_RESET	0x15
+#	define PSI_CLEAR_COLD_START	0x07
+#	define PSI_SET_COLD_START	0x17
+
+
+
+struct voyager_bios_info {
+	__u8	len;
+	__u8	major;
+	__u8	minor;
+	__u8	debug;
+	__u8	num_classes;
+	__u8	class_1;
+	__u8	class_2;
+};
+
+/* The following structures and definitions are for the Kernel/SUS
+ * interface these are needed to find out how SUS initialised any Quad
+ * boards in the system */
+
+#define	NUMBER_OF_MC_BUSSES	2
+#define SLOTS_PER_MC_BUS	8
+#define MAX_CPUS                16      /* 16 way CPU system */
+#define MAX_PROCESSOR_BOARDS	4	/* 4 processor slot system */
+#define MAX_CACHE_LEVELS	4	/* # of cache levels supported */
+#define MAX_SHARED_CPUS		4	/* # of CPUs that can share a LARC */
+#define NUMBER_OF_POS_REGS	8
+
+typedef struct {
+	__u8	MC_Slot;
+	__u8	POS_Values[NUMBER_OF_POS_REGS];
+} __attribute__((packed)) MC_SlotInformation_t;
+
+struct QuadDescription {
+	__u8  Type;	/* for type 0 (DYADIC or MONADIC) all fields
+			 * will be zero except for slot */
+	__u8 StructureVersion;
+	__u32 CPI_BaseAddress;
+	__u32  LARC_BankSize;
+	__u32 LocalMemoryStateBits;
+	__u8  Slot; /* Processor slots 1 - 4 */
+} __attribute__((packed));
+
+struct ProcBoardInfo {
+	__u8 Type;
+	__u8 StructureVersion;
+	__u8 NumberOfBoards;
+	struct QuadDescription QuadData[MAX_PROCESSOR_BOARDS];
+} __attribute__((packed));
+
+struct CacheDescription {
+	__u8 Level;
+	__u32 TotalSize;
+	__u16 LineSize;
+	__u8  Associativity;
+	__u8  CacheType;
+	__u8  WriteType;
+	__u8  Number_CPUs_SharedBy;
+	__u8  Shared_CPUs_Hardware_IDs[MAX_SHARED_CPUS];
+
+} __attribute__((packed));
+
+struct CPU_Description {
+	__u8 CPU_HardwareId;
+	char *FRU_String;
+	__u8 NumberOfCacheLevels;
+	struct CacheDescription CacheLevelData[MAX_CACHE_LEVELS];
+} __attribute__((packed));
+
+struct CPU_Info {
+	__u8 Type;
+	__u8 StructureVersion;
+	__u8 NumberOf_CPUs;
+	struct CPU_Description CPU_Data[MAX_CPUS];
+} __attribute__((packed));
+
+
+/*
+ * This structure will be used by SUS and the OS.
+ * The assumption about this structure is that no blank space is
+ * packed in it by our friend the compiler.
+ */
+typedef struct {
+	__u8	Mailbox_SUS;		/* Written to by SUS to give
+					   commands/response to the OS */
+	__u8	Mailbox_OS;		/* Written to by the OS to give
+					   commands/response to SUS */
+	__u8	SUS_MailboxVersion;	/* Tells the OS which iteration of the
+					   interface SUS supports */
+	__u8	OS_MailboxVersion;	/* Tells SUS which iteration of the
+					   interface the OS supports */
+	__u32	OS_Flags;		/* Flags set by the OS as info for
+					   SUS */
+	__u32	SUS_Flags;		/* Flags set by SUS as info
+					   for the OS */
+	__u32	WatchDogPeriod;		/* Watchdog period (in seconds) which
+					   the DP uses to see if the OS
+					   is dead */
+	__u32	WatchDogCount;		/* Updated by the OS on every tic. */
+	__u32	MemoryFor_SUS_ErrorLog;	/* Flat 32 bit address which tells SUS
+					   where to stuff the SUS error log
+					   on a dump */
+	MC_SlotInformation_t MC_SlotInfo[NUMBER_OF_MC_BUSSES*SLOTS_PER_MC_BUS];
+					/* Storage for MCA POS data */
+	/* All new SECOND_PASS_INTERFACE fields added from this point */
+	struct ProcBoardInfo    *BoardData;
+	struct CPU_Info         *CPU_Data;
+	/* All new fields must be added from this point */
+} Voyager_KernelSUS_Mbox_t;
+
+/* structure for finding the right memory address to send a QIC CPI to */
+struct voyager_qic_cpi {
+	/* Each cache line (32 bytes) can trigger a cpi.  The cpi
+	 * read/write may occur anywhere in the cache line---pick the
+	 * middle to be safe */
+	struct  {
+		__u32 pad1[3];
+		__u32 cpi;
+		__u32 pad2[4];
+	} qic_cpi[8];
+};
+
+struct voyager_status {
+	__u32	power_fail:1;
+	__u32	switch_off:1;
+	__u32	request_from_kernel:1;
+};
+
+struct voyager_psi_regs {
+	__u8 cat_id;
+	__u8 cat_dev;
+	__u8 cat_control;
+	__u8 subaddr;
+	__u8 dummy4;
+	__u8 checkbit;
+	__u8 subaddr_low;
+	__u8 subaddr_high;
+	__u8 intstatus;
+	__u8 stat1;
+	__u8 stat3;
+	__u8 fault;
+	__u8 tms;
+	__u8 gen;
+	__u8 sysconf;
+	__u8 dummy15;
+};
+
+struct voyager_psi_subregs {
+	__u8 supply;
+	__u8 mask;
+	__u8 present;
+	__u8 DCfail;
+	__u8 ACfail;
+	__u8 fail;
+	__u8 UPSfail;
+	__u8 genstatus;
+};
+
+struct voyager_psi {
+	struct voyager_psi_regs regs;
+	struct voyager_psi_subregs subregs;
+};
+
+struct voyager_SUS {
+#define	VOYAGER_DUMP_BUTTON_NMI		0x1
+#define VOYAGER_SUS_VALID		0x2
+#define VOYAGER_SYSINT_COMPLETE		0x3
+	__u8	SUS_mbox;
+#define VOYAGER_NO_COMMAND		0x0
+#define VOYAGER_IGNORE_DUMP		0x1
+#define VOYAGER_DO_DUMP			0x2
+#define VOYAGER_SYSINT_HANDSHAKE	0x3
+#define VOYAGER_DO_MEM_DUMP		0x4
+#define VOYAGER_SYSINT_WAS_RECOVERED	0x5
+	__u8	kernel_mbox;
+#define	VOYAGER_MAILBOX_VERSION		0x10
+	__u8	SUS_version;
+	__u8	kernel_version;
+#define VOYAGER_OS_HAS_SYSINT		0x1
+#define VOYAGER_OS_IN_PROGRESS		0x2
+#define VOYAGER_UPDATING_WDPERIOD	0x4
+	__u32	kernel_flags;
+#define VOYAGER_SUS_BOOTING		0x1
+#define VOYAGER_SUS_IN_PROGRESS		0x2
+	__u32	SUS_flags;
+	__u32	watchdog_period;
+	__u32	watchdog_count;
+	__u32	SUS_errorlog;
+	/* lots of system configuration stuff under here */
+};
+
+/* Variables exported by voyager_smp */
+extern __u32 voyager_extended_vic_processors;
+extern __u32 voyager_allowed_boot_processors;
+extern __u32 voyager_quad_processors;
+extern struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS];
+extern struct voyager_SUS *voyager_SUS;
+
+/* variables exported always */
+extern struct task_struct *voyager_thread;
+extern int voyager_level;
+extern struct voyager_status voyager_status;
+
+/* functions exported by the voyager and voyager_smp modules */
+extern int voyager_cat_readb(__u8 module, __u8 asic, int reg);
+extern void voyager_cat_init(void);
+extern void voyager_detect(struct voyager_bios_info *);
+extern void voyager_trap_init(void);
+extern void voyager_setup_irqs(void);
+extern int voyager_memory_detect(int region, __u32 *addr, __u32 *length);
+extern void voyager_smp_intr_init(void);
+extern __u8 voyager_extended_cmos_read(__u16 cmos_address);
+extern void voyager_smp_dump(void);
+extern void voyager_timer_interrupt(void);
+extern void smp_local_timer_interrupt(void);
+extern void voyager_power_off(void);
+extern void smp_voyager_power_off(void *dummy);
+extern void voyager_restart(void);
+extern void voyager_cat_power_off(void);
+extern void voyager_cat_do_common_interrupt(void);
+extern void voyager_handle_nmi(void);
+/* Commands for the following are */
+#define	VOYAGER_PSI_READ	0
+#define VOYAGER_PSI_WRITE	1
+#define VOYAGER_PSI_SUBREAD	2
+#define VOYAGER_PSI_SUBWRITE	3
+extern void voyager_cat_psi(__u8, __u16, __u8 *);
diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h
new file mode 100644
index 0000000..d0983d2
--- /dev/null
+++ b/arch/x86/include/asm/vsyscall.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_X86_VSYSCALL_H
+#define _ASM_X86_VSYSCALL_H
+
+enum vsyscall_num {
+	__NR_vgettimeofday,
+	__NR_vtime,
+	__NR_vgetcpu,
+};
+
+#define VSYSCALL_START (-10UL << 20)
+#define VSYSCALL_SIZE 1024
+#define VSYSCALL_END (-2UL << 20)
+#define VSYSCALL_MAPPED_PAGES 1
+#define VSYSCALL_ADDR(vsyscall_nr) (VSYSCALL_START+VSYSCALL_SIZE*(vsyscall_nr))
+
+#ifdef __KERNEL__
+#include <linux/seqlock.h>
+
+#define __section_vgetcpu_mode __attribute__ ((unused, __section__ (".vgetcpu_mode"), aligned(16)))
+#define __section_jiffies __attribute__ ((unused, __section__ (".jiffies"), aligned(16)))
+
+/* Definitions for CONFIG_GENERIC_TIME definitions */
+#define __section_vsyscall_gtod_data __attribute__ \
+	((unused, __section__ (".vsyscall_gtod_data"),aligned(16)))
+#define __section_vsyscall_clock __attribute__ \
+	((unused, __section__ (".vsyscall_clock"),aligned(16)))
+#define __vsyscall_fn \
+	__attribute__ ((unused, __section__(".vsyscall_fn"))) notrace
+
+#define VGETCPU_RDTSCP	1
+#define VGETCPU_LSL	2
+
+extern int __vgetcpu_mode;
+extern volatile unsigned long __jiffies;
+
+/* kernel space (writeable) */
+extern int vgetcpu_mode;
+extern struct timezone sys_tz;
+
+extern void map_vsyscall(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_VSYSCALL_H */
diff --git a/arch/x86/include/asm/xcr.h b/arch/x86/include/asm/xcr.h
new file mode 100644
index 0000000..f2cba4e7
--- /dev/null
+++ b/arch/x86/include/asm/xcr.h
@@ -0,0 +1,49 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2008 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2 or (at your
+ *   option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * asm-x86/xcr.h
+ *
+ * Definitions for the eXtended Control Register instructions
+ */
+
+#ifndef _ASM_X86_XCR_H
+#define _ASM_X86_XCR_H
+
+#define XCR_XFEATURE_ENABLED_MASK	0x00000000
+
+#ifdef __KERNEL__
+# ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+static inline u64 xgetbv(u32 index)
+{
+	u32 eax, edx;
+
+	asm volatile(".byte 0x0f,0x01,0xd0" /* xgetbv */
+		     : "=a" (eax), "=d" (edx)
+		     : "c" (index));
+	return eax + ((u64)edx << 32);
+}
+
+static inline void xsetbv(u32 index, u64 value)
+{
+	u32 eax = value;
+	u32 edx = value >> 32;
+
+	asm volatile(".byte 0x0f,0x01,0xd1" /* xsetbv */
+		     : : "a" (eax), "d" (edx), "c" (index));
+}
+
+# endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_XCR_H */
diff --git a/arch/x86/include/asm/xen/events.h b/arch/x86/include/asm/xen/events.h
new file mode 100644
index 0000000..1914418
--- /dev/null
+++ b/arch/x86/include/asm/xen/events.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_X86_XEN_EVENTS_H
+#define _ASM_X86_XEN_EVENTS_H
+
+enum ipi_vector {
+	XEN_RESCHEDULE_VECTOR,
+	XEN_CALL_FUNCTION_VECTOR,
+	XEN_CALL_FUNCTION_SINGLE_VECTOR,
+	XEN_SPIN_UNLOCK_VECTOR,
+
+	XEN_NR_IPIS,
+};
+
+static inline int xen_irqs_disabled(struct pt_regs *regs)
+{
+	return raw_irqs_disabled_flags(regs->flags);
+}
+
+static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
+{
+	regs->orig_ax = ~irq;
+	do_IRQ(regs);
+}
+
+#endif /* _ASM_X86_XEN_EVENTS_H */
diff --git a/arch/x86/include/asm/xen/grant_table.h b/arch/x86/include/asm/xen/grant_table.h
new file mode 100644
index 0000000..fdbbb45
--- /dev/null
+++ b/arch/x86/include/asm/xen/grant_table.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_X86_XEN_GRANT_TABLE_H
+#define _ASM_X86_XEN_GRANT_TABLE_H
+
+#define xen_alloc_vm_area(size)	alloc_vm_area(size)
+#define xen_free_vm_area(area)	free_vm_area(area)
+
+#endif /* _ASM_X86_XEN_GRANT_TABLE_H */
diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h
new file mode 100644
index 0000000..3f6000d
--- /dev/null
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -0,0 +1,527 @@
+/******************************************************************************
+ * hypercall.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Copyright (c) 2002-2004, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _ASM_X86_XEN_HYPERCALL_H
+#define _ASM_X86_XEN_HYPERCALL_H
+
+#include <linux/errno.h>
+#include <linux/string.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/sched.h>
+#include <xen/interface/physdev.h>
+
+/*
+ * The hypercall asms have to meet several constraints:
+ * - Work on 32- and 64-bit.
+ *    The two architectures put their arguments in different sets of
+ *    registers.
+ *
+ * - Work around asm syntax quirks
+ *    It isn't possible to specify one of the rNN registers in a
+ *    constraint, so we use explicit register variables to get the
+ *    args into the right place.
+ *
+ * - Mark all registers as potentially clobbered
+ *    Even unused parameters can be clobbered by the hypervisor, so we
+ *    need to make sure gcc knows it.
+ *
+ * - Avoid compiler bugs.
+ *    This is the tricky part.  Because x86_32 has such a constrained
+ *    register set, gcc versions below 4.3 have trouble generating
+ *    code when all the arg registers and memory are trashed by the
+ *    asm.  There are syntactically simpler ways of achieving the
+ *    semantics below, but they cause the compiler to crash.
+ *
+ *    The only combination I found which works is:
+ *     - assign the __argX variables first
+ *     - list all actually used parameters as "+r" (__argX)
+ *     - clobber the rest
+ *
+ * The result certainly isn't pretty, and it really shows up cpp's
+ * weakness as as macro language.  Sorry.  (But let's just give thanks
+ * there aren't more than 5 arguments...)
+ */
+
+extern struct { char _entry[32]; } hypercall_page[];
+
+#define __HYPERCALL		"call hypercall_page+%c[offset]"
+#define __HYPERCALL_ENTRY(x)						\
+	[offset] "i" (__HYPERVISOR_##x * sizeof(hypercall_page[0]))
+
+#ifdef CONFIG_X86_32
+#define __HYPERCALL_RETREG	"eax"
+#define __HYPERCALL_ARG1REG	"ebx"
+#define __HYPERCALL_ARG2REG	"ecx"
+#define __HYPERCALL_ARG3REG	"edx"
+#define __HYPERCALL_ARG4REG	"esi"
+#define __HYPERCALL_ARG5REG	"edi"
+#else
+#define __HYPERCALL_RETREG	"rax"
+#define __HYPERCALL_ARG1REG	"rdi"
+#define __HYPERCALL_ARG2REG	"rsi"
+#define __HYPERCALL_ARG3REG	"rdx"
+#define __HYPERCALL_ARG4REG	"r10"
+#define __HYPERCALL_ARG5REG	"r8"
+#endif
+
+#define __HYPERCALL_DECLS						\
+	register unsigned long __res  asm(__HYPERCALL_RETREG);		\
+	register unsigned long __arg1 asm(__HYPERCALL_ARG1REG) = __arg1; \
+	register unsigned long __arg2 asm(__HYPERCALL_ARG2REG) = __arg2; \
+	register unsigned long __arg3 asm(__HYPERCALL_ARG3REG) = __arg3; \
+	register unsigned long __arg4 asm(__HYPERCALL_ARG4REG) = __arg4; \
+	register unsigned long __arg5 asm(__HYPERCALL_ARG5REG) = __arg5;
+
+#define __HYPERCALL_0PARAM	"=r" (__res)
+#define __HYPERCALL_1PARAM	__HYPERCALL_0PARAM, "+r" (__arg1)
+#define __HYPERCALL_2PARAM	__HYPERCALL_1PARAM, "+r" (__arg2)
+#define __HYPERCALL_3PARAM	__HYPERCALL_2PARAM, "+r" (__arg3)
+#define __HYPERCALL_4PARAM	__HYPERCALL_3PARAM, "+r" (__arg4)
+#define __HYPERCALL_5PARAM	__HYPERCALL_4PARAM, "+r" (__arg5)
+
+#define __HYPERCALL_0ARG()
+#define __HYPERCALL_1ARG(a1)						\
+	__HYPERCALL_0ARG()		__arg1 = (unsigned long)(a1);
+#define __HYPERCALL_2ARG(a1,a2)						\
+	__HYPERCALL_1ARG(a1)		__arg2 = (unsigned long)(a2);
+#define __HYPERCALL_3ARG(a1,a2,a3)					\
+	__HYPERCALL_2ARG(a1,a2)		__arg3 = (unsigned long)(a3);
+#define __HYPERCALL_4ARG(a1,a2,a3,a4)					\
+	__HYPERCALL_3ARG(a1,a2,a3)	__arg4 = (unsigned long)(a4);
+#define __HYPERCALL_5ARG(a1,a2,a3,a4,a5)				\
+	__HYPERCALL_4ARG(a1,a2,a3,a4)	__arg5 = (unsigned long)(a5);
+
+#define __HYPERCALL_CLOBBER5	"memory"
+#define __HYPERCALL_CLOBBER4	__HYPERCALL_CLOBBER5, __HYPERCALL_ARG5REG
+#define __HYPERCALL_CLOBBER3	__HYPERCALL_CLOBBER4, __HYPERCALL_ARG4REG
+#define __HYPERCALL_CLOBBER2	__HYPERCALL_CLOBBER3, __HYPERCALL_ARG3REG
+#define __HYPERCALL_CLOBBER1	__HYPERCALL_CLOBBER2, __HYPERCALL_ARG2REG
+#define __HYPERCALL_CLOBBER0	__HYPERCALL_CLOBBER1, __HYPERCALL_ARG1REG
+
+#define _hypercall0(type, name)						\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_0ARG();						\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_0PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER0);				\
+	(type)__res;							\
+})
+
+#define _hypercall1(type, name, a1)					\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_1ARG(a1);						\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_1PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER1);				\
+	(type)__res;							\
+})
+
+#define _hypercall2(type, name, a1, a2)					\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_2ARG(a1, a2);					\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_2PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER2);				\
+	(type)__res;							\
+})
+
+#define _hypercall3(type, name, a1, a2, a3)				\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_3ARG(a1, a2, a3);					\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_3PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER3);				\
+	(type)__res;							\
+})
+
+#define _hypercall4(type, name, a1, a2, a3, a4)				\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_4ARG(a1, a2, a3, a4);				\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_4PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER4);				\
+	(type)__res;							\
+})
+
+#define _hypercall5(type, name, a1, a2, a3, a4, a5)			\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_5ARG(a1, a2, a3, a4, a5);				\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_5PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER5);				\
+	(type)__res;							\
+})
+
+static inline int
+HYPERVISOR_set_trap_table(struct trap_info *table)
+{
+	return _hypercall1(int, set_trap_table, table);
+}
+
+static inline int
+HYPERVISOR_mmu_update(struct mmu_update *req, int count,
+		      int *success_count, domid_t domid)
+{
+	return _hypercall4(int, mmu_update, req, count, success_count, domid);
+}
+
+static inline int
+HYPERVISOR_mmuext_op(struct mmuext_op *op, int count,
+		     int *success_count, domid_t domid)
+{
+	return _hypercall4(int, mmuext_op, op, count, success_count, domid);
+}
+
+static inline int
+HYPERVISOR_set_gdt(unsigned long *frame_list, int entries)
+{
+	return _hypercall2(int, set_gdt, frame_list, entries);
+}
+
+static inline int
+HYPERVISOR_stack_switch(unsigned long ss, unsigned long esp)
+{
+	return _hypercall2(int, stack_switch, ss, esp);
+}
+
+#ifdef CONFIG_X86_32
+static inline int
+HYPERVISOR_set_callbacks(unsigned long event_selector,
+			 unsigned long event_address,
+			 unsigned long failsafe_selector,
+			 unsigned long failsafe_address)
+{
+	return _hypercall4(int, set_callbacks,
+			   event_selector, event_address,
+			   failsafe_selector, failsafe_address);
+}
+#else  /* CONFIG_X86_64 */
+static inline int
+HYPERVISOR_set_callbacks(unsigned long event_address,
+			unsigned long failsafe_address,
+			unsigned long syscall_address)
+{
+	return _hypercall3(int, set_callbacks,
+			   event_address, failsafe_address,
+			   syscall_address);
+}
+#endif  /* CONFIG_X86_{32,64} */
+
+static inline int
+HYPERVISOR_callback_op(int cmd, void *arg)
+{
+	return _hypercall2(int, callback_op, cmd, arg);
+}
+
+static inline int
+HYPERVISOR_fpu_taskswitch(int set)
+{
+	return _hypercall1(int, fpu_taskswitch, set);
+}
+
+static inline int
+HYPERVISOR_sched_op(int cmd, void *arg)
+{
+	return _hypercall2(int, sched_op_new, cmd, arg);
+}
+
+static inline long
+HYPERVISOR_set_timer_op(u64 timeout)
+{
+	unsigned long timeout_hi = (unsigned long)(timeout>>32);
+	unsigned long timeout_lo = (unsigned long)timeout;
+	return _hypercall2(long, set_timer_op, timeout_lo, timeout_hi);
+}
+
+static inline int
+HYPERVISOR_set_debugreg(int reg, unsigned long value)
+{
+	return _hypercall2(int, set_debugreg, reg, value);
+}
+
+static inline unsigned long
+HYPERVISOR_get_debugreg(int reg)
+{
+	return _hypercall1(unsigned long, get_debugreg, reg);
+}
+
+static inline int
+HYPERVISOR_update_descriptor(u64 ma, u64 desc)
+{
+	return _hypercall4(int, update_descriptor, ma, ma>>32, desc, desc>>32);
+}
+
+static inline int
+HYPERVISOR_memory_op(unsigned int cmd, void *arg)
+{
+	return _hypercall2(int, memory_op, cmd, arg);
+}
+
+static inline int
+HYPERVISOR_multicall(void *call_list, int nr_calls)
+{
+	return _hypercall2(int, multicall, call_list, nr_calls);
+}
+
+static inline int
+HYPERVISOR_update_va_mapping(unsigned long va, pte_t new_val,
+			     unsigned long flags)
+{
+	if (sizeof(new_val) == sizeof(long))
+		return _hypercall3(int, update_va_mapping, va,
+				   new_val.pte, flags);
+	else
+		return _hypercall4(int, update_va_mapping, va,
+				   new_val.pte, new_val.pte >> 32, flags);
+}
+
+static inline int
+HYPERVISOR_event_channel_op(int cmd, void *arg)
+{
+	int rc = _hypercall2(int, event_channel_op, cmd, arg);
+	if (unlikely(rc == -ENOSYS)) {
+		struct evtchn_op op;
+		op.cmd = cmd;
+		memcpy(&op.u, arg, sizeof(op.u));
+		rc = _hypercall1(int, event_channel_op_compat, &op);
+		memcpy(arg, &op.u, sizeof(op.u));
+	}
+	return rc;
+}
+
+static inline int
+HYPERVISOR_xen_version(int cmd, void *arg)
+{
+	return _hypercall2(int, xen_version, cmd, arg);
+}
+
+static inline int
+HYPERVISOR_console_io(int cmd, int count, char *str)
+{
+	return _hypercall3(int, console_io, cmd, count, str);
+}
+
+static inline int
+HYPERVISOR_physdev_op(int cmd, void *arg)
+{
+	int rc = _hypercall2(int, physdev_op, cmd, arg);
+	if (unlikely(rc == -ENOSYS)) {
+		struct physdev_op op;
+		op.cmd = cmd;
+		memcpy(&op.u, arg, sizeof(op.u));
+		rc = _hypercall1(int, physdev_op_compat, &op);
+		memcpy(arg, &op.u, sizeof(op.u));
+	}
+	return rc;
+}
+
+static inline int
+HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count)
+{
+	return _hypercall3(int, grant_table_op, cmd, uop, count);
+}
+
+static inline int
+HYPERVISOR_update_va_mapping_otherdomain(unsigned long va, pte_t new_val,
+					 unsigned long flags, domid_t domid)
+{
+	if (sizeof(new_val) == sizeof(long))
+		return _hypercall4(int, update_va_mapping_otherdomain, va,
+				   new_val.pte, flags, domid);
+	else
+		return _hypercall5(int, update_va_mapping_otherdomain, va,
+				   new_val.pte, new_val.pte >> 32,
+				   flags, domid);
+}
+
+static inline int
+HYPERVISOR_vm_assist(unsigned int cmd, unsigned int type)
+{
+	return _hypercall2(int, vm_assist, cmd, type);
+}
+
+static inline int
+HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args)
+{
+	return _hypercall3(int, vcpu_op, cmd, vcpuid, extra_args);
+}
+
+#ifdef CONFIG_X86_64
+static inline int
+HYPERVISOR_set_segment_base(int reg, unsigned long value)
+{
+	return _hypercall2(int, set_segment_base, reg, value);
+}
+#endif
+
+static inline int
+HYPERVISOR_suspend(unsigned long srec)
+{
+	return _hypercall3(int, sched_op, SCHEDOP_shutdown,
+			   SHUTDOWN_suspend, srec);
+}
+
+static inline int
+HYPERVISOR_nmi_op(unsigned long op, unsigned long arg)
+{
+	return _hypercall2(int, nmi_op, op, arg);
+}
+
+static inline void
+MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set)
+{
+	mcl->op = __HYPERVISOR_fpu_taskswitch;
+	mcl->args[0] = set;
+}
+
+static inline void
+MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
+			pte_t new_val, unsigned long flags)
+{
+	mcl->op = __HYPERVISOR_update_va_mapping;
+	mcl->args[0] = va;
+	if (sizeof(new_val) == sizeof(long)) {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = flags;
+	} else {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = new_val.pte >> 32;
+		mcl->args[3] = flags;
+	}
+}
+
+static inline void
+MULTI_grant_table_op(struct multicall_entry *mcl, unsigned int cmd,
+		     void *uop, unsigned int count)
+{
+	mcl->op = __HYPERVISOR_grant_table_op;
+	mcl->args[0] = cmd;
+	mcl->args[1] = (unsigned long)uop;
+	mcl->args[2] = count;
+}
+
+static inline void
+MULTI_update_va_mapping_otherdomain(struct multicall_entry *mcl, unsigned long va,
+				    pte_t new_val, unsigned long flags,
+				    domid_t domid)
+{
+	mcl->op = __HYPERVISOR_update_va_mapping_otherdomain;
+	mcl->args[0] = va;
+	if (sizeof(new_val) == sizeof(long)) {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = flags;
+		mcl->args[3] = domid;
+	} else {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = new_val.pte >> 32;
+		mcl->args[3] = flags;
+		mcl->args[4] = domid;
+	}
+}
+
+static inline void
+MULTI_update_descriptor(struct multicall_entry *mcl, u64 maddr,
+			struct desc_struct desc)
+{
+	mcl->op = __HYPERVISOR_update_descriptor;
+	if (sizeof(maddr) == sizeof(long)) {
+		mcl->args[0] = maddr;
+		mcl->args[1] = *(unsigned long *)&desc;
+	} else {
+		mcl->args[0] = maddr;
+		mcl->args[1] = maddr >> 32;
+		mcl->args[2] = desc.a;
+		mcl->args[3] = desc.b;
+	}
+}
+
+static inline void
+MULTI_memory_op(struct multicall_entry *mcl, unsigned int cmd, void *arg)
+{
+	mcl->op = __HYPERVISOR_memory_op;
+	mcl->args[0] = cmd;
+	mcl->args[1] = (unsigned long)arg;
+}
+
+static inline void
+MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req,
+		 int count, int *success_count, domid_t domid)
+{
+	mcl->op = __HYPERVISOR_mmu_update;
+	mcl->args[0] = (unsigned long)req;
+	mcl->args[1] = count;
+	mcl->args[2] = (unsigned long)success_count;
+	mcl->args[3] = domid;
+}
+
+static inline void
+MULTI_mmuext_op(struct multicall_entry *mcl, struct mmuext_op *op, int count,
+		int *success_count, domid_t domid)
+{
+	mcl->op = __HYPERVISOR_mmuext_op;
+	mcl->args[0] = (unsigned long)op;
+	mcl->args[1] = count;
+	mcl->args[2] = (unsigned long)success_count;
+	mcl->args[3] = domid;
+}
+
+static inline void
+MULTI_set_gdt(struct multicall_entry *mcl, unsigned long *frames, int entries)
+{
+	mcl->op = __HYPERVISOR_set_gdt;
+	mcl->args[0] = (unsigned long)frames;
+	mcl->args[1] = entries;
+}
+
+static inline void
+MULTI_stack_switch(struct multicall_entry *mcl,
+		   unsigned long ss, unsigned long esp)
+{
+	mcl->op = __HYPERVISOR_stack_switch;
+	mcl->args[0] = ss;
+	mcl->args[1] = esp;
+}
+
+#endif /* _ASM_X86_XEN_HYPERCALL_H */
diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h
new file mode 100644
index 0000000..a38d25a
--- /dev/null
+++ b/arch/x86/include/asm/xen/hypervisor.h
@@ -0,0 +1,82 @@
+/******************************************************************************
+ * hypervisor.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Copyright (c) 2002-2004, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _ASM_X86_XEN_HYPERVISOR_H
+#define _ASM_X86_XEN_HYPERVISOR_H
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/version.h>
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/desc.h>
+#if defined(__i386__)
+#  ifdef CONFIG_X86_PAE
+#   include <asm-generic/pgtable-nopud.h>
+#  else
+#   include <asm-generic/pgtable-nopmd.h>
+#  endif
+#endif
+#include <asm/xen/hypercall.h>
+
+/* arch/i386/kernel/setup.c */
+extern struct shared_info *HYPERVISOR_shared_info;
+extern struct start_info *xen_start_info;
+
+/* arch/i386/mach-xen/evtchn.c */
+/* Force a proper event-channel callback from Xen. */
+extern void force_evtchn_callback(void);
+
+/* Turn jiffies into Xen system time. */
+u64 jiffies_to_st(unsigned long jiffies);
+
+
+#define MULTI_UVMFLAGS_INDEX 3
+#define MULTI_UVMDOMID_INDEX 4
+
+enum xen_domain_type {
+	XEN_NATIVE,
+	XEN_PV_DOMAIN,
+	XEN_HVM_DOMAIN,
+};
+
+extern enum xen_domain_type xen_domain_type;
+
+#define xen_domain()		(xen_domain_type != XEN_NATIVE)
+#define xen_pv_domain()		(xen_domain_type == XEN_PV_DOMAIN)
+#define xen_initial_domain()	(xen_pv_domain() && xen_start_info->flags & SIF_INITDOMAIN)
+#define xen_hvm_domain()	(xen_domain_type == XEN_HVM_DOMAIN)
+
+#endif /* _ASM_X86_XEN_HYPERVISOR_H */
diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h
new file mode 100644
index 0000000..e8506c1
--- /dev/null
+++ b/arch/x86/include/asm/xen/interface.h
@@ -0,0 +1,175 @@
+/******************************************************************************
+ * arch-x86_32.h
+ *
+ * Guest OS interface to x86 Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef _ASM_X86_XEN_INTERFACE_H
+#define _ASM_X86_XEN_INTERFACE_H
+
+#ifdef __XEN__
+#define __DEFINE_GUEST_HANDLE(name, type) \
+    typedef struct { type *p; } __guest_handle_ ## name
+#else
+#define __DEFINE_GUEST_HANDLE(name, type) \
+    typedef type * __guest_handle_ ## name
+#endif
+
+#define DEFINE_GUEST_HANDLE_STRUCT(name) \
+	__DEFINE_GUEST_HANDLE(name, struct name)
+#define DEFINE_GUEST_HANDLE(name) __DEFINE_GUEST_HANDLE(name, name)
+#define GUEST_HANDLE(name)        __guest_handle_ ## name
+
+#ifdef __XEN__
+#if defined(__i386__)
+#define set_xen_guest_handle(hnd, val)			\
+	do {						\
+		if (sizeof(hnd) == 8)			\
+			*(uint64_t *)&(hnd) = 0;	\
+		(hnd).p = val;				\
+	} while (0)
+#elif defined(__x86_64__)
+#define set_xen_guest_handle(hnd, val)	do { (hnd).p = val; } while (0)
+#endif
+#else
+#if defined(__i386__)
+#define set_xen_guest_handle(hnd, val)			\
+	do {						\
+		if (sizeof(hnd) == 8)			\
+			*(uint64_t *)&(hnd) = 0;	\
+		(hnd) = val;				\
+	} while (0)
+#elif defined(__x86_64__)
+#define set_xen_guest_handle(hnd, val)	do { (hnd) = val; } while (0)
+#endif
+#endif
+
+#ifndef __ASSEMBLY__
+/* Guest handles for primitive C types. */
+__DEFINE_GUEST_HANDLE(uchar, unsigned char);
+__DEFINE_GUEST_HANDLE(uint,  unsigned int);
+__DEFINE_GUEST_HANDLE(ulong, unsigned long);
+DEFINE_GUEST_HANDLE(char);
+DEFINE_GUEST_HANDLE(int);
+DEFINE_GUEST_HANDLE(long);
+DEFINE_GUEST_HANDLE(void);
+#endif
+
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#endif
+
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/* Maximum number of virtual CPUs in multi-processor guests. */
+#define MAX_VIRT_CPUS 32
+
+/*
+ * SEGMENT DESCRIPTOR TABLES
+ */
+/*
+ * A number of GDT entries are reserved by Xen. These are not situated at the
+ * start of the GDT because some stupid OSes export hard-coded selector values
+ * in their ABI. These hard-coded values are always near the start of the GDT,
+ * so Xen places itself out of the way, at the far end of the GDT.
+ */
+#define FIRST_RESERVED_GDT_PAGE  14
+#define FIRST_RESERVED_GDT_BYTE  (FIRST_RESERVED_GDT_PAGE * 4096)
+#define FIRST_RESERVED_GDT_ENTRY (FIRST_RESERVED_GDT_BYTE / 8)
+
+/*
+ * Send an array of these to HYPERVISOR_set_trap_table()
+ * The privilege level specifies which modes may enter a trap via a software
+ * interrupt. On x86/64, since rings 1 and 2 are unavailable, we allocate
+ * privilege levels as follows:
+ *  Level == 0: Noone may enter
+ *  Level == 1: Kernel may enter
+ *  Level == 2: Kernel may enter
+ *  Level == 3: Everyone may enter
+ */
+#define TI_GET_DPL(_ti)		((_ti)->flags & 3)
+#define TI_GET_IF(_ti)		((_ti)->flags & 4)
+#define TI_SET_DPL(_ti, _dpl)	((_ti)->flags |= (_dpl))
+#define TI_SET_IF(_ti, _if)	((_ti)->flags |= ((!!(_if))<<2))
+
+#ifndef __ASSEMBLY__
+struct trap_info {
+    uint8_t       vector;  /* exception vector                              */
+    uint8_t       flags;   /* 0-3: privilege level; 4: clear event enable?  */
+    uint16_t      cs;      /* code selector                                 */
+    unsigned long address; /* code offset                                   */
+};
+DEFINE_GUEST_HANDLE_STRUCT(trap_info);
+
+struct arch_shared_info {
+    unsigned long max_pfn;                  /* max pfn that appears in table */
+    /* Frame containing list of mfns containing list of mfns containing p2m. */
+    unsigned long pfn_to_mfn_frame_list_list;
+    unsigned long nmi_reason;
+};
+#endif	/* !__ASSEMBLY__ */
+
+#ifdef CONFIG_X86_32
+#include "interface_32.h"
+#else
+#include "interface_64.h"
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * The following is all CPU context. Note that the fpu_ctxt block is filled
+ * in by FXSAVE if the CPU has feature FXSR; otherwise FSAVE is used.
+ */
+struct vcpu_guest_context {
+    /* FPU registers come first so they can be aligned for FXSAVE/FXRSTOR. */
+    struct { char x[512]; } fpu_ctxt;       /* User-level FPU registers     */
+#define VGCF_I387_VALID (1<<0)
+#define VGCF_HVM_GUEST  (1<<1)
+#define VGCF_IN_KERNEL  (1<<2)
+    unsigned long flags;                    /* VGCF_* flags                 */
+    struct cpu_user_regs user_regs;         /* User-level CPU registers     */
+    struct trap_info trap_ctxt[256];        /* Virtual IDT                  */
+    unsigned long ldt_base, ldt_ents;       /* LDT (linear address, # ents) */
+    unsigned long gdt_frames[16], gdt_ents; /* GDT (machine frames, # ents) */
+    unsigned long kernel_ss, kernel_sp;     /* Virtual TSS (only SS1/SP1)   */
+    /* NB. User pagetable on x86/64 is placed in ctrlreg[1]. */
+    unsigned long ctrlreg[8];               /* CR0-CR7 (control registers)  */
+    unsigned long debugreg[8];              /* DB0-DB7 (debug registers)    */
+#ifdef __i386__
+    unsigned long event_callback_cs;        /* CS:EIP of event callback     */
+    unsigned long event_callback_eip;
+    unsigned long failsafe_callback_cs;     /* CS:EIP of failsafe callback  */
+    unsigned long failsafe_callback_eip;
+#else
+    unsigned long event_callback_eip;
+    unsigned long failsafe_callback_eip;
+    unsigned long syscall_callback_eip;
+#endif
+    unsigned long vm_assist;                /* VMASST_TYPE_* bitmap */
+#ifdef __x86_64__
+    /* Segment base addresses. */
+    uint64_t      fs_base;
+    uint64_t      gs_base_kernel;
+    uint64_t      gs_base_user;
+#endif
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_guest_context);
+#endif	/* !__ASSEMBLY__ */
+
+/*
+ * Prefix forces emulation of some non-trapping instructions.
+ * Currently only CPUID.
+ */
+#ifdef __ASSEMBLY__
+#define XEN_EMULATE_PREFIX .byte 0x0f,0x0b,0x78,0x65,0x6e ;
+#define XEN_CPUID          XEN_EMULATE_PREFIX cpuid
+#else
+#define XEN_EMULATE_PREFIX ".byte 0x0f,0x0b,0x78,0x65,0x6e ; "
+#define XEN_CPUID          XEN_EMULATE_PREFIX "cpuid"
+#endif
+
+#endif /* _ASM_X86_XEN_INTERFACE_H */
diff --git a/arch/x86/include/asm/xen/interface_32.h b/arch/x86/include/asm/xen/interface_32.h
new file mode 100644
index 0000000..42a7e00
--- /dev/null
+++ b/arch/x86/include/asm/xen/interface_32.h
@@ -0,0 +1,97 @@
+/******************************************************************************
+ * arch-x86_32.h
+ *
+ * Guest OS interface to x86 32-bit Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef _ASM_X86_XEN_INTERFACE_32_H
+#define _ASM_X86_XEN_INTERFACE_32_H
+
+
+/*
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+#define FLAT_RING1_CS 0xe019    /* GDT index 259 */
+#define FLAT_RING1_DS 0xe021    /* GDT index 260 */
+#define FLAT_RING1_SS 0xe021    /* GDT index 260 */
+#define FLAT_RING3_CS 0xe02b    /* GDT index 261 */
+#define FLAT_RING3_DS 0xe033    /* GDT index 262 */
+#define FLAT_RING3_SS 0xe033    /* GDT index 262 */
+
+#define FLAT_KERNEL_CS FLAT_RING1_CS
+#define FLAT_KERNEL_DS FLAT_RING1_DS
+#define FLAT_KERNEL_SS FLAT_RING1_SS
+#define FLAT_USER_CS    FLAT_RING3_CS
+#define FLAT_USER_DS    FLAT_RING3_DS
+#define FLAT_USER_SS    FLAT_RING3_SS
+
+/* And the trap vector is... */
+#define TRAP_INSTR "int $0x82"
+
+/*
+ * Virtual addresses beyond this are not modifiable by guest OSes. The
+ * machine->physical mapping table starts at this address, read-only.
+ */
+#define __HYPERVISOR_VIRT_START 0xF5800000
+
+#ifndef __ASSEMBLY__
+
+struct cpu_user_regs {
+    uint32_t ebx;
+    uint32_t ecx;
+    uint32_t edx;
+    uint32_t esi;
+    uint32_t edi;
+    uint32_t ebp;
+    uint32_t eax;
+    uint16_t error_code;    /* private */
+    uint16_t entry_vector;  /* private */
+    uint32_t eip;
+    uint16_t cs;
+    uint8_t  saved_upcall_mask;
+    uint8_t  _pad0;
+    uint32_t eflags;        /* eflags.IF == !saved_upcall_mask */
+    uint32_t esp;
+    uint16_t ss, _pad1;
+    uint16_t es, _pad2;
+    uint16_t ds, _pad3;
+    uint16_t fs, _pad4;
+    uint16_t gs, _pad5;
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
+
+struct arch_vcpu_info {
+    unsigned long cr2;
+    unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
+};
+
+struct xen_callback {
+	unsigned long cs;
+	unsigned long eip;
+};
+typedef struct xen_callback xen_callback_t;
+
+#define XEN_CALLBACK(__cs, __eip)				\
+	((struct xen_callback){ .cs = (__cs), .eip = (unsigned long)(__eip) })
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * Page-directory addresses above 4GB do not fit into architectural %cr3.
+ * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
+ * must use the following accessor macros to pack/unpack valid MFNs.
+ *
+ * Note that Xen is using the fact that the pagetable base is always
+ * page-aligned, and putting the 12 MSB of the address into the 12 LSB
+ * of cr3.
+ */
+#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
+#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
+
+#endif /* _ASM_X86_XEN_INTERFACE_32_H */
diff --git a/arch/x86/include/asm/xen/interface_64.h b/arch/x86/include/asm/xen/interface_64.h
new file mode 100644
index 0000000..100d266
--- /dev/null
+++ b/arch/x86/include/asm/xen/interface_64.h
@@ -0,0 +1,159 @@
+#ifndef _ASM_X86_XEN_INTERFACE_64_H
+#define _ASM_X86_XEN_INTERFACE_64_H
+
+/*
+ * 64-bit segment selectors
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+
+#define FLAT_RING3_CS32 0xe023  /* GDT index 260 */
+#define FLAT_RING3_CS64 0xe033  /* GDT index 261 */
+#define FLAT_RING3_DS32 0xe02b  /* GDT index 262 */
+#define FLAT_RING3_DS64 0x0000  /* NULL selector */
+#define FLAT_RING3_SS32 0xe02b  /* GDT index 262 */
+#define FLAT_RING3_SS64 0xe02b  /* GDT index 262 */
+
+#define FLAT_KERNEL_DS64 FLAT_RING3_DS64
+#define FLAT_KERNEL_DS32 FLAT_RING3_DS32
+#define FLAT_KERNEL_DS   FLAT_KERNEL_DS64
+#define FLAT_KERNEL_CS64 FLAT_RING3_CS64
+#define FLAT_KERNEL_CS32 FLAT_RING3_CS32
+#define FLAT_KERNEL_CS   FLAT_KERNEL_CS64
+#define FLAT_KERNEL_SS64 FLAT_RING3_SS64
+#define FLAT_KERNEL_SS32 FLAT_RING3_SS32
+#define FLAT_KERNEL_SS   FLAT_KERNEL_SS64
+
+#define FLAT_USER_DS64 FLAT_RING3_DS64
+#define FLAT_USER_DS32 FLAT_RING3_DS32
+#define FLAT_USER_DS   FLAT_USER_DS64
+#define FLAT_USER_CS64 FLAT_RING3_CS64
+#define FLAT_USER_CS32 FLAT_RING3_CS32
+#define FLAT_USER_CS   FLAT_USER_CS64
+#define FLAT_USER_SS64 FLAT_RING3_SS64
+#define FLAT_USER_SS32 FLAT_RING3_SS32
+#define FLAT_USER_SS   FLAT_USER_SS64
+
+#define __HYPERVISOR_VIRT_START 0xFFFF800000000000
+#define __HYPERVISOR_VIRT_END   0xFFFF880000000000
+#define __MACH2PHYS_VIRT_START  0xFFFF800000000000
+#define __MACH2PHYS_VIRT_END    0xFFFF804000000000
+
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#define HYPERVISOR_VIRT_END   mk_unsigned_long(__HYPERVISOR_VIRT_END)
+#endif
+
+#define MACH2PHYS_VIRT_START  mk_unsigned_long(__MACH2PHYS_VIRT_START)
+#define MACH2PHYS_VIRT_END    mk_unsigned_long(__MACH2PHYS_VIRT_END)
+#define MACH2PHYS_NR_ENTRIES  ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/*
+ * int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
+ *  @which == SEGBASE_*  ;  @base == 64-bit base address
+ * Returns 0 on success.
+ */
+#define SEGBASE_FS          0
+#define SEGBASE_GS_USER     1
+#define SEGBASE_GS_KERNEL   2
+#define SEGBASE_GS_USER_SEL 3 /* Set user %gs specified in base[15:0] */
+
+/*
+ * int HYPERVISOR_iret(void)
+ * All arguments are on the kernel stack, in the following format.
+ * Never returns if successful. Current kernel context is lost.
+ * The saved CS is mapped as follows:
+ *   RING0 -> RING3 kernel mode.
+ *   RING1 -> RING3 kernel mode.
+ *   RING2 -> RING3 kernel mode.
+ *   RING3 -> RING3 user mode.
+ * However RING0 indicates that the guest kernel should return to iteself
+ * directly with
+ *      orb   $3,1*8(%rsp)
+ *      iretq
+ * If flags contains VGCF_in_syscall:
+ *   Restore RAX, RIP, RFLAGS, RSP.
+ *   Discard R11, RCX, CS, SS.
+ * Otherwise:
+ *   Restore RAX, R11, RCX, CS:RIP, RFLAGS, SS:RSP.
+ * All other registers are saved on hypercall entry and restored to user.
+ */
+/* Guest exited in SYSCALL context? Return to guest with SYSRET? */
+#define _VGCF_in_syscall 8
+#define VGCF_in_syscall  (1<<_VGCF_in_syscall)
+#define VGCF_IN_SYSCALL  VGCF_in_syscall
+
+#ifndef __ASSEMBLY__
+
+struct iret_context {
+    /* Top of stack (%rsp at point of hypercall). */
+    uint64_t rax, r11, rcx, flags, rip, cs, rflags, rsp, ss;
+    /* Bottom of iret stack frame. */
+};
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+/* Anonymous union includes both 32- and 64-bit names (e.g., eax/rax). */
+#define __DECL_REG(name) union { \
+    uint64_t r ## name, e ## name; \
+    uint32_t _e ## name; \
+}
+#else
+/* Non-gcc sources must always use the proper 64-bit name (e.g., rax). */
+#define __DECL_REG(name) uint64_t r ## name
+#endif
+
+struct cpu_user_regs {
+    uint64_t r15;
+    uint64_t r14;
+    uint64_t r13;
+    uint64_t r12;
+    __DECL_REG(bp);
+    __DECL_REG(bx);
+    uint64_t r11;
+    uint64_t r10;
+    uint64_t r9;
+    uint64_t r8;
+    __DECL_REG(ax);
+    __DECL_REG(cx);
+    __DECL_REG(dx);
+    __DECL_REG(si);
+    __DECL_REG(di);
+    uint32_t error_code;    /* private */
+    uint32_t entry_vector;  /* private */
+    __DECL_REG(ip);
+    uint16_t cs, _pad0[1];
+    uint8_t  saved_upcall_mask;
+    uint8_t  _pad1[3];
+    __DECL_REG(flags);      /* rflags.IF == !saved_upcall_mask */
+    __DECL_REG(sp);
+    uint16_t ss, _pad2[3];
+    uint16_t es, _pad3[3];
+    uint16_t ds, _pad4[3];
+    uint16_t fs, _pad5[3]; /* Non-zero => takes precedence over fs_base.     */
+    uint16_t gs, _pad6[3]; /* Non-zero => takes precedence over gs_base_usr. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+#undef __DECL_REG
+
+#define xen_pfn_to_cr3(pfn) ((unsigned long)(pfn) << 12)
+#define xen_cr3_to_pfn(cr3) ((unsigned long)(cr3) >> 12)
+
+struct arch_vcpu_info {
+    unsigned long cr2;
+    unsigned long pad; /* sizeof(vcpu_info_t) == 64 */
+};
+
+typedef unsigned long xen_callback_t;
+
+#define XEN_CALLBACK(__cs, __rip)				\
+	((unsigned long)(__rip))
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* _ASM_X86_XEN_INTERFACE_64_H */
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
new file mode 100644
index 0000000..bc62899
--- /dev/null
+++ b/arch/x86/include/asm/xen/page.h
@@ -0,0 +1,165 @@
+#ifndef _ASM_X86_XEN_PAGE_H
+#define _ASM_X86_XEN_PAGE_H
+
+#include <linux/pfn.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+#include <xen/features.h>
+
+/* Xen machine address */
+typedef struct xmaddr {
+	phys_addr_t maddr;
+} xmaddr_t;
+
+/* Xen pseudo-physical address */
+typedef struct xpaddr {
+	phys_addr_t paddr;
+} xpaddr_t;
+
+#define XMADDR(x)	((xmaddr_t) { .maddr = (x) })
+#define XPADDR(x)	((xpaddr_t) { .paddr = (x) })
+
+/**** MACHINE <-> PHYSICAL CONVERSION MACROS ****/
+#define INVALID_P2M_ENTRY	(~0UL)
+#define FOREIGN_FRAME_BIT	(1UL<<31)
+#define FOREIGN_FRAME(m)	((m) | FOREIGN_FRAME_BIT)
+
+/* Maximum amount of memory we can handle in a domain in pages */
+#define MAX_DOMAIN_PAGES						\
+    ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE))
+
+
+extern unsigned long get_phys_to_machine(unsigned long pfn);
+extern void set_phys_to_machine(unsigned long pfn, unsigned long mfn);
+
+static inline unsigned long pfn_to_mfn(unsigned long pfn)
+{
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return pfn;
+
+	return get_phys_to_machine(pfn) & ~FOREIGN_FRAME_BIT;
+}
+
+static inline int phys_to_machine_mapping_valid(unsigned long pfn)
+{
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return 1;
+
+	return get_phys_to_machine(pfn) != INVALID_P2M_ENTRY;
+}
+
+static inline unsigned long mfn_to_pfn(unsigned long mfn)
+{
+	unsigned long pfn;
+
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return mfn;
+
+#if 0
+	if (unlikely((mfn >> machine_to_phys_order) != 0))
+		return max_mapnr;
+#endif
+
+	pfn = 0;
+	/*
+	 * The array access can fail (e.g., device space beyond end of RAM).
+	 * In such cases it doesn't matter what we return (we return garbage),
+	 * but we must handle the fault without crashing!
+	 */
+	__get_user(pfn, &machine_to_phys_mapping[mfn]);
+
+	return pfn;
+}
+
+static inline xmaddr_t phys_to_machine(xpaddr_t phys)
+{
+	unsigned offset = phys.paddr & ~PAGE_MASK;
+	return XMADDR(PFN_PHYS(pfn_to_mfn(PFN_DOWN(phys.paddr))) | offset);
+}
+
+static inline xpaddr_t machine_to_phys(xmaddr_t machine)
+{
+	unsigned offset = machine.maddr & ~PAGE_MASK;
+	return XPADDR(PFN_PHYS(mfn_to_pfn(PFN_DOWN(machine.maddr))) | offset);
+}
+
+/*
+ * We detect special mappings in one of two ways:
+ *  1. If the MFN is an I/O page then Xen will set the m2p entry
+ *     to be outside our maximum possible pseudophys range.
+ *  2. If the MFN belongs to a different domain then we will certainly
+ *     not have MFN in our p2m table. Conversely, if the page is ours,
+ *     then we'll have p2m(m2p(MFN))==MFN.
+ * If we detect a special mapping then it doesn't have a 'struct page'.
+ * We force !pfn_valid() by returning an out-of-range pointer.
+ *
+ * NB. These checks require that, for any MFN that is not in our reservation,
+ * there is no PFN such that p2m(PFN) == MFN. Otherwise we can get confused if
+ * we are foreign-mapping the MFN, and the other domain as m2p(MFN) == PFN.
+ * Yikes! Various places must poke in INVALID_P2M_ENTRY for safety.
+ *
+ * NB2. When deliberately mapping foreign pages into the p2m table, you *must*
+ *      use FOREIGN_FRAME(). This will cause pte_pfn() to choke on it, as we
+ *      require. In all the cases we care about, the FOREIGN_FRAME bit is
+ *      masked (e.g., pfn_to_mfn()) so behaviour there is correct.
+ */
+static inline unsigned long mfn_to_local_pfn(unsigned long mfn)
+{
+	extern unsigned long max_mapnr;
+	unsigned long pfn = mfn_to_pfn(mfn);
+	if ((pfn < max_mapnr)
+	    && !xen_feature(XENFEAT_auto_translated_physmap)
+	    && (get_phys_to_machine(pfn) != mfn))
+		return max_mapnr; /* force !pfn_valid() */
+	/* XXX fixme; not true with sparsemem */
+	return pfn;
+}
+
+/* VIRT <-> MACHINE conversion */
+#define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
+#define virt_to_mfn(v)		(pfn_to_mfn(PFN_DOWN(__pa(v))))
+#define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
+
+static inline unsigned long pte_mfn(pte_t pte)
+{
+	return (pte.pte & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
+static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
+{
+	pte_t pte;
+
+	pte.pte = ((phys_addr_t)page_nr << PAGE_SHIFT) |
+		(pgprot_val(pgprot) & __supported_pte_mask);
+
+	return pte;
+}
+
+static inline pteval_t pte_val_ma(pte_t pte)
+{
+	return pte.pte;
+}
+
+static inline pte_t __pte_ma(pteval_t x)
+{
+	return (pte_t) { .pte = x };
+}
+
+#define pmd_val_ma(v) ((v).pmd)
+#ifdef __PAGETABLE_PUD_FOLDED
+#define pud_val_ma(v) ((v).pgd.pgd)
+#else
+#define pud_val_ma(v) ((v).pud)
+#endif
+#define __pmd_ma(x)	((pmd_t) { (x) } )
+
+#define pgd_val_ma(x)	((x).pgd)
+
+
+xmaddr_t arbitrary_virt_to_machine(void *address);
+void make_lowmem_page_readonly(void *vaddr);
+void make_lowmem_page_readwrite(void *vaddr);
+
+#endif /* _ASM_X86_XEN_PAGE_H */
diff --git a/arch/x86/include/asm/xor.h b/arch/x86/include/asm/xor.h
new file mode 100644
index 0000000..11b3bb8
--- /dev/null
+++ b/arch/x86/include/asm/xor.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "xor_32.h"
+#else
+# include "xor_64.h"
+#endif
diff --git a/arch/x86/include/asm/xor_32.h b/arch/x86/include/asm/xor_32.h
new file mode 100644
index 0000000..133b40a
--- /dev/null
+++ b/arch/x86/include/asm/xor_32.h
@@ -0,0 +1,888 @@
+#ifndef _ASM_X86_XOR_32_H
+#define _ASM_X86_XOR_32_H
+
+/*
+ * Optimized RAID-5 checksumming functions for MMX and SSE.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * High-speed RAID5 checksumming functions utilizing MMX instructions.
+ * Copyright (C) 1998 Ingo Molnar.
+ */
+
+#define LD(x, y)	"       movq   8*("#x")(%1), %%mm"#y"   ;\n"
+#define ST(x, y)	"       movq %%mm"#y",   8*("#x")(%1)   ;\n"
+#define XO1(x, y)	"       pxor   8*("#x")(%2), %%mm"#y"   ;\n"
+#define XO2(x, y)	"       pxor   8*("#x")(%3), %%mm"#y"   ;\n"
+#define XO3(x, y)	"       pxor   8*("#x")(%4), %%mm"#y"   ;\n"
+#define XO4(x, y)	"       pxor   8*("#x")(%5), %%mm"#y"   ;\n"
+
+#include <asm/i387.h>
+
+static void
+xor_pII_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i)				\
+	LD(i, 0)				\
+		LD(i + 1, 1)			\
+			LD(i + 2, 2)		\
+				LD(i + 3, 3)	\
+	XO1(i, 0)				\
+	ST(i, 0)				\
+		XO1(i+1, 1)			\
+		ST(i+1, 1)			\
+			XO1(i + 2, 2)		\
+			ST(i + 2, 2)		\
+				XO1(i + 3, 3)	\
+				ST(i + 3, 3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_pII_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	      unsigned long *p3)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i)				\
+	LD(i, 0)				\
+		LD(i + 1, 1)			\
+			LD(i + 2, 2)		\
+				LD(i + 3, 3)	\
+	XO1(i, 0)				\
+		XO1(i + 1, 1)			\
+			XO1(i + 2, 2)		\
+				XO1(i + 3, 3)	\
+	XO2(i, 0)				\
+	ST(i, 0)				\
+		XO2(i + 1, 1)			\
+		ST(i + 1, 1)			\
+			XO2(i + 2, 2)		\
+			ST(i + 2, 2)		\
+				XO2(i + 3, 3)	\
+				ST(i + 3, 3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       addl $128, %3         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_pII_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	      unsigned long *p3, unsigned long *p4)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i)				\
+	LD(i, 0)				\
+		LD(i + 1, 1)			\
+			LD(i + 2, 2)		\
+				LD(i + 3, 3)	\
+	XO1(i, 0)				\
+		XO1(i + 1, 1)			\
+			XO1(i + 2, 2)		\
+				XO1(i + 3, 3)	\
+	XO2(i, 0)				\
+		XO2(i + 1, 1)			\
+			XO2(i + 2, 2)		\
+				XO2(i + 3, 3)	\
+	XO3(i, 0)				\
+	ST(i, 0)				\
+		XO3(i + 1, 1)			\
+		ST(i + 1, 1)			\
+			XO3(i + 2, 2)		\
+			ST(i + 2, 2)		\
+				XO3(i + 3, 3)	\
+				ST(i + 3, 3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       addl $128, %3         ;\n"
+	"       addl $128, %4         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+
+static void
+xor_pII_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	      unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	/* Make sure GCC forgets anything it knows about p4 or p5,
+	   such that it won't pass to the asm volatile below a
+	   register that is shared with any other variable.  That's
+	   because we modify p4 and p5 there, but we can't mark them
+	   as read/write, otherwise we'd overflow the 10-asm-operands
+	   limit of GCC < 3.1.  */
+	asm("" : "+r" (p4), "+r" (p5));
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i)				\
+	LD(i, 0)				\
+		LD(i + 1, 1)			\
+			LD(i + 2, 2)		\
+				LD(i + 3, 3)	\
+	XO1(i, 0)				\
+		XO1(i + 1, 1)			\
+			XO1(i + 2, 2)		\
+				XO1(i + 3, 3)	\
+	XO2(i, 0)				\
+		XO2(i + 1, 1)			\
+			XO2(i + 2, 2)		\
+				XO2(i + 3, 3)	\
+	XO3(i, 0)				\
+		XO3(i + 1, 1)			\
+			XO3(i + 2, 2)		\
+				XO3(i + 3, 3)	\
+	XO4(i, 0)				\
+	ST(i, 0)				\
+		XO4(i + 1, 1)			\
+		ST(i + 1, 1)			\
+			XO4(i + 2, 2)		\
+			ST(i + 2, 2)		\
+				XO4(i + 3, 3)	\
+				ST(i + 3, 3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       addl $128, %3         ;\n"
+	"       addl $128, %4         ;\n"
+	"       addl $128, %5         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	: "r" (p4), "r" (p5)
+	: "memory");
+
+	/* p4 and p5 were modified, and now the variables are dead.
+	   Clobber them just to be sure nobody does something stupid
+	   like assuming they have some legal value.  */
+	asm("" : "=r" (p4), "=r" (p5));
+
+	kernel_fpu_end();
+}
+
+#undef LD
+#undef XO1
+#undef XO2
+#undef XO3
+#undef XO4
+#undef ST
+#undef BLOCK
+
+static void
+xor_p5_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+	" .align 32	             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_p5_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	     unsigned long *p3)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+	" .align 32,0x90             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       pxor   (%3), %%mm0   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       pxor  8(%3), %%mm1   ;\n"
+	"       pxor 16(%3), %%mm2   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       pxor 24(%3), %%mm3   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       pxor 32(%3), %%mm4   ;\n"
+	"       pxor 40(%3), %%mm5   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       pxor 48(%3), %%mm6   ;\n"
+	"       pxor 56(%3), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       addl $64, %3         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	:
+	: "memory" );
+
+	kernel_fpu_end();
+}
+
+static void
+xor_p5_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	     unsigned long *p3, unsigned long *p4)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+	" .align 32,0x90             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       pxor   (%3), %%mm0   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       pxor  8(%3), %%mm1   ;\n"
+	"       pxor   (%4), %%mm0   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       pxor 16(%3), %%mm2   ;\n"
+	"       pxor  8(%4), %%mm1   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       pxor 16(%4), %%mm2   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       pxor 24(%3), %%mm3   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       pxor 32(%3), %%mm4   ;\n"
+	"       pxor 24(%4), %%mm3   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       pxor 40(%3), %%mm5   ;\n"
+	"       pxor 32(%4), %%mm4   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       pxor 40(%4), %%mm5   ;\n"
+	"       pxor 48(%3), %%mm6   ;\n"
+	"       pxor 56(%3), %%mm7   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 48(%4), %%mm6   ;\n"
+	"       pxor 56(%4), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       addl $64, %3         ;\n"
+	"       addl $64, %4         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_p5_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	     unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	/* Make sure GCC forgets anything it knows about p4 or p5,
+	   such that it won't pass to the asm volatile below a
+	   register that is shared with any other variable.  That's
+	   because we modify p4 and p5 there, but we can't mark them
+	   as read/write, otherwise we'd overflow the 10-asm-operands
+	   limit of GCC < 3.1.  */
+	asm("" : "+r" (p4), "+r" (p5));
+
+	asm volatile(
+	" .align 32,0x90             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       pxor   (%3), %%mm0   ;\n"
+	"       pxor  8(%3), %%mm1   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       pxor   (%4), %%mm0   ;\n"
+	"       pxor  8(%4), %%mm1   ;\n"
+	"       pxor 16(%3), %%mm2   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       pxor   (%5), %%mm0   ;\n"
+	"       pxor  8(%5), %%mm1   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       pxor 16(%4), %%mm2   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       pxor 16(%5), %%mm2   ;\n"
+	"       pxor 24(%3), %%mm3   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 24(%4), %%mm3   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       pxor 24(%5), %%mm3   ;\n"
+	"       pxor 32(%3), %%mm4   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       pxor 32(%4), %%mm4   ;\n"
+	"       pxor 40(%3), %%mm5   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       pxor 32(%5), %%mm4   ;\n"
+	"       pxor 40(%4), %%mm5   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       pxor 48(%3), %%mm6   ;\n"
+	"       pxor 56(%3), %%mm7   ;\n"
+	"       pxor 40(%5), %%mm5   ;\n"
+	"       pxor 48(%4), %%mm6   ;\n"
+	"       pxor 56(%4), %%mm7   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 48(%5), %%mm6   ;\n"
+	"       pxor 56(%5), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       addl $64, %3         ;\n"
+	"       addl $64, %4         ;\n"
+	"       addl $64, %5         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	: "r" (p4), "r" (p5)
+	: "memory");
+
+	/* p4 and p5 were modified, and now the variables are dead.
+	   Clobber them just to be sure nobody does something stupid
+	   like assuming they have some legal value.  */
+	asm("" : "=r" (p4), "=r" (p5));
+
+	kernel_fpu_end();
+}
+
+static struct xor_block_template xor_block_pII_mmx = {
+	.name = "pII_mmx",
+	.do_2 = xor_pII_mmx_2,
+	.do_3 = xor_pII_mmx_3,
+	.do_4 = xor_pII_mmx_4,
+	.do_5 = xor_pII_mmx_5,
+};
+
+static struct xor_block_template xor_block_p5_mmx = {
+	.name = "p5_mmx",
+	.do_2 = xor_p5_mmx_2,
+	.do_3 = xor_p5_mmx_3,
+	.do_4 = xor_p5_mmx_4,
+	.do_5 = xor_p5_mmx_5,
+};
+
+/*
+ * Cache avoiding checksumming functions utilizing KNI instructions
+ * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
+ */
+
+#define XMMS_SAVE				\
+do {						\
+	preempt_disable();			\
+	cr0 = read_cr0();			\
+	clts();					\
+	asm volatile(				\
+		"movups %%xmm0,(%0)	;\n\t"	\
+		"movups %%xmm1,0x10(%0)	;\n\t"	\
+		"movups %%xmm2,0x20(%0)	;\n\t"	\
+		"movups %%xmm3,0x30(%0)	;\n\t"	\
+		:				\
+		: "r" (xmm_save) 		\
+		: "memory");			\
+} while (0)
+
+#define XMMS_RESTORE				\
+do {						\
+	asm volatile(				\
+		"sfence			;\n\t"	\
+		"movups (%0),%%xmm0	;\n\t"	\
+		"movups 0x10(%0),%%xmm1	;\n\t"	\
+		"movups 0x20(%0),%%xmm2	;\n\t"	\
+		"movups 0x30(%0),%%xmm3	;\n\t"	\
+		:				\
+		: "r" (xmm_save)		\
+		: "memory");			\
+	write_cr0(cr0);				\
+	preempt_enable();			\
+} while (0)
+
+#define ALIGN16 __attribute__((aligned(16)))
+
+#define OFFS(x)		"16*("#x")"
+#define PF_OFFS(x)	"256+16*("#x")"
+#define	PF0(x)		"	prefetchnta "PF_OFFS(x)"(%1)		;\n"
+#define LD(x, y)	"       movaps   "OFFS(x)"(%1), %%xmm"#y"	;\n"
+#define ST(x, y)	"       movaps %%xmm"#y",   "OFFS(x)"(%1)	;\n"
+#define PF1(x)		"	prefetchnta "PF_OFFS(x)"(%2)		;\n"
+#define PF2(x)		"	prefetchnta "PF_OFFS(x)"(%3)		;\n"
+#define PF3(x)		"	prefetchnta "PF_OFFS(x)"(%4)		;\n"
+#define PF4(x)		"	prefetchnta "PF_OFFS(x)"(%5)		;\n"
+#define PF5(x)		"	prefetchnta "PF_OFFS(x)"(%6)		;\n"
+#define XO1(x, y)	"       xorps   "OFFS(x)"(%2), %%xmm"#y"	;\n"
+#define XO2(x, y)	"       xorps   "OFFS(x)"(%3), %%xmm"#y"	;\n"
+#define XO3(x, y)	"       xorps   "OFFS(x)"(%4), %%xmm"#y"	;\n"
+#define XO4(x, y)	"       xorps   "OFFS(x)"(%5), %%xmm"#y"	;\n"
+#define XO5(x, y)	"       xorps   "OFFS(x)"(%6), %%xmm"#y"	;\n"
+
+
+static void
+xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i)					\
+		LD(i, 0)				\
+			LD(i + 1, 1)			\
+		PF1(i)					\
+				PF1(i + 2)		\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO1(i, 0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		ST(i, 0)				\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addl $256, %1           ;\n"
+	"       addl $256, %2           ;\n"
+	"       decl %0                 ;\n"
+	"       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2)
+	:
+	: "memory");
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3)
+{
+	unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i,0)					\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO1(i,0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		XO2(i,0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		ST(i,0)					\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addl $256, %1           ;\n"
+	"       addl $256, %2           ;\n"
+	"       addl $256, %3           ;\n"
+	"       decl %0                 ;\n"
+	"       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r"(p2), "+r"(p3)
+	:
+	: "memory" );
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4)
+{
+	unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i,0)					\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		XO1(i,0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		PF3(i)					\
+				PF3(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO2(i,0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		XO3(i,0)				\
+			XO3(i + 1, 1)			\
+				XO3(i + 2, 2)		\
+					XO3(i + 3, 3)	\
+		ST(i,0)					\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addl $256, %1           ;\n"
+	"       addl $256, %2           ;\n"
+	"       addl $256, %3           ;\n"
+	"       addl $256, %4           ;\n"
+	"       decl %0                 ;\n"
+	"       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
+	:
+	: "memory" );
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+	/* Make sure GCC forgets anything it knows about p4 or p5,
+	   such that it won't pass to the asm volatile below a
+	   register that is shared with any other variable.  That's
+	   because we modify p4 and p5 there, but we can't mark them
+	   as read/write, otherwise we'd overflow the 10-asm-operands
+	   limit of GCC < 3.1.  */
+	asm("" : "+r" (p4), "+r" (p5));
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i,0)					\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		XO1(i,0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		PF3(i)					\
+				PF3(i + 2)		\
+		XO2(i,0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		PF4(i)					\
+				PF4(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO3(i,0)				\
+			XO3(i + 1, 1)			\
+				XO3(i + 2, 2)		\
+					XO3(i + 3, 3)	\
+		XO4(i,0)				\
+			XO4(i + 1, 1)			\
+				XO4(i + 2, 2)		\
+					XO4(i + 3, 3)	\
+		ST(i,0)					\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addl $256, %1           ;\n"
+	"       addl $256, %2           ;\n"
+	"       addl $256, %3           ;\n"
+	"       addl $256, %4           ;\n"
+	"       addl $256, %5           ;\n"
+	"       decl %0                 ;\n"
+	"       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	: "r" (p4), "r" (p5)
+	: "memory");
+
+	/* p4 and p5 were modified, and now the variables are dead.
+	   Clobber them just to be sure nobody does something stupid
+	   like assuming they have some legal value.  */
+	asm("" : "=r" (p4), "=r" (p5));
+
+	XMMS_RESTORE;
+}
+
+static struct xor_block_template xor_block_pIII_sse = {
+	.name = "pIII_sse",
+	.do_2 = xor_sse_2,
+	.do_3 = xor_sse_3,
+	.do_4 = xor_sse_4,
+	.do_5 = xor_sse_5,
+};
+
+/* Also try the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+do {							\
+	xor_speed(&xor_block_8regs);			\
+	xor_speed(&xor_block_8regs_p);			\
+	xor_speed(&xor_block_32regs);			\
+	xor_speed(&xor_block_32regs_p);			\
+	if (cpu_has_xmm)				\
+		xor_speed(&xor_block_pIII_sse);		\
+	if (cpu_has_mmx) {				\
+		xor_speed(&xor_block_pII_mmx);		\
+		xor_speed(&xor_block_p5_mmx);		\
+	}						\
+} while (0)
+
+/* We force the use of the SSE xor block because it can write around L2.
+   We may also be able to load into the L1 only depending on how the cpu
+   deals with a load to a line that is being prefetched.  */
+#define XOR_SELECT_TEMPLATE(FASTEST)			\
+	(cpu_has_xmm ? &xor_block_pIII_sse : FASTEST)
+
+#endif /* _ASM_X86_XOR_32_H */
diff --git a/arch/x86/include/asm/xor_64.h b/arch/x86/include/asm/xor_64.h
new file mode 100644
index 0000000..1549b5e
--- /dev/null
+++ b/arch/x86/include/asm/xor_64.h
@@ -0,0 +1,361 @@
+#ifndef _ASM_X86_XOR_64_H
+#define _ASM_X86_XOR_64_H
+
+/*
+ * Optimized RAID-5 checksumming functions for MMX and SSE.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+/*
+ * Cache avoiding checksumming functions utilizing KNI instructions
+ * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
+ */
+
+/*
+ * Based on
+ * High-speed RAID5 checksumming functions utilizing SSE instructions.
+ * Copyright (C) 1998 Ingo Molnar.
+ */
+
+/*
+ * x86-64 changes / gcc fixes from Andi Kleen.
+ * Copyright 2002 Andi Kleen, SuSE Labs.
+ *
+ * This hasn't been optimized for the hammer yet, but there are likely
+ * no advantages to be gotten from x86-64 here anyways.
+ */
+
+typedef struct {
+	unsigned long a, b;
+} __attribute__((aligned(16))) xmm_store_t;
+
+/* Doesn't use gcc to save the XMM registers, because there is no easy way to
+   tell it to do a clts before the register saving. */
+#define XMMS_SAVE				\
+do {						\
+	preempt_disable();			\
+	asm volatile(				\
+		"movq %%cr0,%0		;\n\t"	\
+		"clts			;\n\t"	\
+		"movups %%xmm0,(%1)	;\n\t"	\
+		"movups %%xmm1,0x10(%1)	;\n\t"	\
+		"movups %%xmm2,0x20(%1)	;\n\t"	\
+		"movups %%xmm3,0x30(%1)	;\n\t"	\
+		: "=&r" (cr0)			\
+		: "r" (xmm_save) 		\
+		: "memory");			\
+} while (0)
+
+#define XMMS_RESTORE				\
+do {						\
+	asm volatile(				\
+		"sfence			;\n\t"	\
+		"movups (%1),%%xmm0	;\n\t"	\
+		"movups 0x10(%1),%%xmm1	;\n\t"	\
+		"movups 0x20(%1),%%xmm2	;\n\t"	\
+		"movups 0x30(%1),%%xmm3	;\n\t"	\
+		"movq 	%0,%%cr0	;\n\t"	\
+		:				\
+		: "r" (cr0), "r" (xmm_save)	\
+		: "memory");			\
+	preempt_enable();			\
+} while (0)
+
+#define OFFS(x)		"16*("#x")"
+#define PF_OFFS(x)	"256+16*("#x")"
+#define	PF0(x)		"	prefetchnta "PF_OFFS(x)"(%[p1])		;\n"
+#define LD(x, y)	"       movaps   "OFFS(x)"(%[p1]), %%xmm"#y"	;\n"
+#define ST(x, y)	"       movaps %%xmm"#y",   "OFFS(x)"(%[p1])	;\n"
+#define PF1(x)		"	prefetchnta "PF_OFFS(x)"(%[p2])		;\n"
+#define PF2(x)		"	prefetchnta "PF_OFFS(x)"(%[p3])		;\n"
+#define PF3(x)		"	prefetchnta "PF_OFFS(x)"(%[p4])		;\n"
+#define PF4(x)		"	prefetchnta "PF_OFFS(x)"(%[p5])		;\n"
+#define PF5(x)		"	prefetchnta "PF_OFFS(x)"(%[p6])		;\n"
+#define XO1(x, y)	"       xorps   "OFFS(x)"(%[p2]), %%xmm"#y"	;\n"
+#define XO2(x, y)	"       xorps   "OFFS(x)"(%[p3]), %%xmm"#y"	;\n"
+#define XO3(x, y)	"       xorps   "OFFS(x)"(%[p4]), %%xmm"#y"	;\n"
+#define XO4(x, y)	"       xorps   "OFFS(x)"(%[p5]), %%xmm"#y"	;\n"
+#define XO5(x, y)	"       xorps   "OFFS(x)"(%[p6]), %%xmm"#y"	;\n"
+
+
+static void
+xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned int lines = bytes >> 8;
+	unsigned long cr0;
+	xmm_store_t xmm_save[4];
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		LD(i, 0)				\
+			LD(i + 1, 1)			\
+		PF1(i)					\
+				PF1(i + 2)		\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO1(i, 0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		ST(i, 0)				\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addq %[inc], %[p1]           ;\n"
+	"       addq %[inc], %[p2]           ;\n"
+		"		decl %[cnt] ; jnz 1b"
+	: [p1] "+r" (p1), [p2] "+r" (p2), [cnt] "+r" (lines)
+	: [inc] "r" (256UL)
+	: "memory");
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3)
+{
+	unsigned int lines = bytes >> 8;
+	xmm_store_t xmm_save[4];
+	unsigned long cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i, 0)					\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO1(i, 0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		XO2(i, 0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		ST(i, 0)				\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addq %[inc], %[p1]           ;\n"
+	"       addq %[inc], %[p2]          ;\n"
+	"       addq %[inc], %[p3]           ;\n"
+		"		decl %[cnt] ; jnz 1b"
+	: [cnt] "+r" (lines),
+	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3)
+	: [inc] "r" (256UL)
+	: "memory");
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4)
+{
+	unsigned int lines = bytes >> 8;
+	xmm_store_t xmm_save[4];
+	unsigned long cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i, 0)				\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		XO1(i, 0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		PF3(i)					\
+				PF3(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO2(i, 0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		XO3(i, 0)				\
+			XO3(i + 1, 1)			\
+				XO3(i + 2, 2)		\
+					XO3(i + 3, 3)	\
+		ST(i, 0)				\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addq %[inc], %[p1]           ;\n"
+	"       addq %[inc], %[p2]           ;\n"
+	"       addq %[inc], %[p3]           ;\n"
+	"       addq %[inc], %[p4]           ;\n"
+	"	decl %[cnt] ; jnz 1b"
+	: [cnt] "+c" (lines),
+	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4)
+	: [inc] "r" (256UL)
+	: "memory" );
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned int lines = bytes >> 8;
+	xmm_store_t xmm_save[4];
+	unsigned long cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i, 0)				\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		XO1(i, 0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		PF3(i)					\
+				PF3(i + 2)		\
+		XO2(i, 0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		PF4(i)					\
+				PF4(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO3(i, 0)				\
+			XO3(i + 1, 1)			\
+				XO3(i + 2, 2)		\
+					XO3(i + 3, 3)	\
+		XO4(i, 0)				\
+			XO4(i + 1, 1)			\
+				XO4(i + 2, 2)		\
+					XO4(i + 3, 3)	\
+		ST(i, 0)				\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addq %[inc], %[p1]           ;\n"
+	"       addq %[inc], %[p2]           ;\n"
+	"       addq %[inc], %[p3]           ;\n"
+	"       addq %[inc], %[p4]           ;\n"
+	"       addq %[inc], %[p5]           ;\n"
+	"	decl %[cnt] ; jnz 1b"
+	: [cnt] "+c" (lines),
+	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4),
+	  [p5] "+r" (p5)
+	: [inc] "r" (256UL)
+	: "memory");
+
+	XMMS_RESTORE;
+}
+
+static struct xor_block_template xor_block_sse = {
+	.name = "generic_sse",
+	.do_2 = xor_sse_2,
+	.do_3 = xor_sse_3,
+	.do_4 = xor_sse_4,
+	.do_5 = xor_sse_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES			\
+do {						\
+	xor_speed(&xor_block_sse);		\
+} while (0)
+
+/* We force the use of the SSE xor block because it can write around L2.
+   We may also be able to load into the L1 only depending on how the cpu
+   deals with a load to a line that is being prefetched.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) (&xor_block_sse)
+
+#endif /* _ASM_X86_XOR_64_H */
diff --git a/arch/x86/include/asm/xsave.h b/arch/x86/include/asm/xsave.h
new file mode 100644
index 0000000..08e9a1a
--- /dev/null
+++ b/arch/x86/include/asm/xsave.h
@@ -0,0 +1,118 @@
+#ifndef __ASM_X86_XSAVE_H
+#define __ASM_X86_XSAVE_H
+
+#include <linux/types.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+
+#define XSTATE_FP	0x1
+#define XSTATE_SSE	0x2
+
+#define XSTATE_FPSSE	(XSTATE_FP | XSTATE_SSE)
+
+#define FXSAVE_SIZE	512
+
+/*
+ * These are the features that the OS can handle currently.
+ */
+#define XCNTXT_MASK	(XSTATE_FP | XSTATE_SSE)
+
+#ifdef CONFIG_X86_64
+#define REX_PREFIX	"0x48, "
+#else
+#define REX_PREFIX
+#endif
+
+extern unsigned int xstate_size;
+extern u64 pcntxt_mask;
+extern struct xsave_struct *init_xstate_buf;
+
+extern void xsave_cntxt_init(void);
+extern void xsave_init(void);
+extern int init_fpu(struct task_struct *child);
+extern int check_for_xstate(struct i387_fxsave_struct __user *buf,
+			    void __user *fpstate,
+			    struct _fpx_sw_bytes *sw);
+
+static inline int xrstor_checking(struct xsave_struct *fx)
+{
+	int err;
+
+	asm volatile("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n\t"
+		     "2:\n"
+		     ".section .fixup,\"ax\"\n"
+		     "3:  movl $-1,%[err]\n"
+		     "    jmp  2b\n"
+		     ".previous\n"
+		     _ASM_EXTABLE(1b, 3b)
+		     : [err] "=r" (err)
+		     : "D" (fx), "m" (*fx), "a" (-1), "d" (-1), "0" (0)
+		     : "memory");
+
+	return err;
+}
+
+static inline int xsave_user(struct xsave_struct __user *buf)
+{
+	int err;
+	__asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x27\n"
+			     "2:\n"
+			     ".section .fixup,\"ax\"\n"
+			     "3:  movl $-1,%[err]\n"
+			     "    jmp  2b\n"
+			     ".previous\n"
+			     ".section __ex_table,\"a\"\n"
+			     _ASM_ALIGN "\n"
+			     _ASM_PTR "1b,3b\n"
+			     ".previous"
+			     : [err] "=r" (err)
+			     : "D" (buf), "a" (-1), "d" (-1), "0" (0)
+			     : "memory");
+	if (unlikely(err) && __clear_user(buf, xstate_size))
+		err = -EFAULT;
+	/* No need to clear here because the caller clears USED_MATH */
+	return err;
+}
+
+static inline int xrestore_user(struct xsave_struct __user *buf, u64 mask)
+{
+	int err;
+	struct xsave_struct *xstate = ((__force struct xsave_struct *)buf);
+	u32 lmask = mask;
+	u32 hmask = mask >> 32;
+
+	__asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n"
+			     "2:\n"
+			     ".section .fixup,\"ax\"\n"
+			     "3:  movl $-1,%[err]\n"
+			     "    jmp  2b\n"
+			     ".previous\n"
+			     ".section __ex_table,\"a\"\n"
+			     _ASM_ALIGN "\n"
+			     _ASM_PTR "1b,3b\n"
+			     ".previous"
+			     : [err] "=r" (err)
+			     : "D" (xstate), "a" (lmask), "d" (hmask), "0" (0)
+			     : "memory");	/* memory required? */
+	return err;
+}
+
+static inline void xrstor_state(struct xsave_struct *fx, u64 mask)
+{
+	u32 lmask = mask;
+	u32 hmask = mask >> 32;
+
+	asm volatile(".byte " REX_PREFIX "0x0f,0xae,0x2f\n\t"
+		     : : "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask)
+		     :   "memory");
+}
+
+static inline void xsave(struct task_struct *tsk)
+{
+	/* This, however, we can work around by forcing the compiler to select
+	   an addressing mode that doesn't require extended registers. */
+	__asm__ __volatile__(".byte " REX_PREFIX "0x0f,0xae,0x27"
+			     : : "D" (&(tsk->thread.xstate->xsave)),
+				 "a" (-1), "d"(-1) : "memory");
+}
+#endif
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 3db651f..d7e5a58 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -10,7 +10,7 @@ ifdef CONFIG_FTRACE
 # Do not profile debug and lowlevel utilities
 CFLAGS_REMOVE_tsc.o = -pg
 CFLAGS_REMOVE_rtc.o = -pg
-CFLAGS_REMOVE_paravirt.o = -pg
+CFLAGS_REMOVE_paravirt-spinlocks.o = -pg
 endif
 
 #
@@ -23,7 +23,7 @@ CFLAGS_hpet.o		:= $(nostackp)
 CFLAGS_tsc.o		:= $(nostackp)
 
 obj-y			:= process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
-obj-y			+= traps_$(BITS).o irq_$(BITS).o
+obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o
 obj-y			+= setup.o i8259.o irqinit_$(BITS).o setup_percpu.o
 obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
@@ -38,7 +38,7 @@ obj-y			+= tsc.o io_delay.o rtc.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-y				+= process.o
-obj-y				+= i387.o
+obj-y				+= i387.o xsave.o
 obj-y				+= ptrace.o
 obj-y				+= ds.o
 obj-$(CONFIG_X86_32)		+= tls.o
@@ -51,7 +51,6 @@ obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot.o
 obj-$(CONFIG_MCA)		+= mca_32.o
 obj-$(CONFIG_X86_MSR)		+= msr.o
 obj-$(CONFIG_X86_CPUID)		+= cpuid.o
-obj-$(CONFIG_MICROCODE)		+= microcode.o
 obj-$(CONFIG_PCI)		+= early-quirks.o
 apm-y				:= apm_32.o
 obj-$(CONFIG_APM)		+= apm.o
@@ -61,14 +60,15 @@ obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_$(BITS).o nmi.o
-obj-$(CONFIG_X86_IO_APIC)	+= io_apic_$(BITS).o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o nmi.o
+obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
+obj-$(CONFIG_X86_ES7000)	+= es7000_32.o
 obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
 obj-y				+= vsmp_64.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
@@ -89,7 +89,7 @@ obj-$(CONFIG_DEBUG_NX_TEST)	+= test_nx.o
 obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
 obj-$(CONFIG_KVM_GUEST)		+= kvm.o
 obj-$(CONFIG_KVM_CLOCK)		+= kvmclock.o
-obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o
 obj-$(CONFIG_PARAVIRT_CLOCK)	+= pvclock.o
 
 obj-$(CONFIG_PCSPKR_PLATFORM)	+= pcspeaker.o
@@ -99,11 +99,18 @@ scx200-y			+= scx200_32.o
 
 obj-$(CONFIG_OLPC)		+= olpc.o
 
+microcode-y				:= microcode_core.o
+microcode-$(CONFIG_MICROCODE_INTEL)	+= microcode_intel.o
+microcode-$(CONFIG_MICROCODE_AMD)	+= microcode_amd.o
+obj-$(CONFIG_MICROCODE)			+= microcode.o
+
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
         obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
-	obj-y				+= bios_uv.o
+	obj-y				+= bios_uv.o uv_irq.o uv_sysfs.o
+        obj-y				+= genx2apic_cluster.o
+        obj-y				+= genx2apic_phys.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index bfd10fd..8c1f76a 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -58,7 +58,6 @@ EXPORT_SYMBOL(acpi_disabled);
 #ifdef	CONFIG_X86_64
 
 #include <asm/proto.h>
-#include <asm/genapic.h>
 
 #else				/* X86 */
 
@@ -97,8 +96,6 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 #warning ACPI uses CMPXCHG, i486 and later hardware
 #endif
 
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
-
 /* --------------------------------------------------------------------------
                               Boot-time Configuration
    -------------------------------------------------------------------------- */
@@ -156,6 +153,9 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 }
 
 #ifdef CONFIG_PCI_MMCONFIG
+
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
 /* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
 struct acpi_mcfg_allocation *pci_mmcfg_config;
 int pci_mmcfg_config_num;
@@ -253,10 +253,8 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled)
 		return;
 	}
 
-#ifdef CONFIG_X86_32
 	if (boot_cpu_physical_apicid != -1U)
 		ver = apic_version[boot_cpu_physical_apicid];
-#endif
 
 	generic_processor_info(id, ver);
 }
@@ -775,11 +773,9 @@ static void __init acpi_register_lapic_address(unsigned long address)
 
 	set_fixmap_nocache(FIX_APIC_BASE, address);
 	if (boot_cpu_physical_apicid == -1U) {
-		boot_cpu_physical_apicid  = GET_APIC_ID(read_apic_id());
-#ifdef CONFIG_X86_32
+		boot_cpu_physical_apicid  = read_apic_id();
 		apic_version[boot_cpu_physical_apicid] =
 			 GET_APIC_VERSION(apic_read(APIC_LVR));
-#endif
 	}
 }
 
@@ -1141,7 +1137,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 		return gsi;
 	}
 	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-		pr_debug(KERN_DEBUG "Pin %d-%d already programmed\n",
+		pr_debug("Pin %d-%d already programmed\n",
 			 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
 #ifdef CONFIG_X86_32
 		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
@@ -1261,7 +1257,7 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 
 	count =
 	    acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr,
-				  NR_IRQ_VECTORS);
+				  nr_irqs);
 	if (count < 0) {
 		printk(KERN_ERR PREFIX
 		       "Error parsing interrupt source overrides entry\n");
@@ -1281,7 +1277,7 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 
 	count =
 	    acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src,
-				  NR_IRQ_VECTORS);
+				  nr_irqs);
 	if (count < 0) {
 		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
 		/* TBD: Cleanup to allow fallback to MPS */
@@ -1351,7 +1347,9 @@ static void __init acpi_process_madt(void)
 				acpi_ioapic = 1;
 
 				smp_found_config = 1;
+#ifdef CONFIG_X86_32
 				setup_apic_routing();
+#endif
 			}
 		}
 		if (error == -EINVAL) {
@@ -1421,8 +1419,16 @@ static int __init force_acpi_ht(const struct dmi_system_id *d)
  */
 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
 {
-	pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", d->ident);
-	acpi_skip_timer_override = 1;
+	/*
+	 * The ati_ixp4x0_rev() early PCI quirk should have set
+	 * the acpi_skip_timer_override flag already:
+	 */
+	if (!acpi_skip_timer_override) {
+		WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
+		pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+			d->ident);
+		acpi_skip_timer_override = 1;
+	}
 	return 0;
 }
 
@@ -1593,6 +1599,11 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
+	{}
+};
+
+/* second table for DMI checks that should run after early-quirks */
+static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
 	/*
 	 * HP laptops which use a DSDT reporting as HP/SB400/10000,
 	 * which includes some code which overrides all temperature
@@ -1605,6 +1616,14 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 	 */
 	{
 	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP nx6115 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
+		     },
+	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
 	 .ident = "HP NX6125 laptop",
 	 .matches = {
 		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
@@ -1619,6 +1638,14 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
 		     },
 	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP 6715b laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
+		     },
+	 },
 	{}
 };
 
@@ -1705,6 +1732,9 @@ int __init early_acpi_boot_init(void)
 
 int __init acpi_boot_init(void)
 {
+	/* those are executed after early-quirks are executed */
+	dmi_check_system(acpi_dmi_table_late);
+
 	/*
 	 * If acpi_disabled, bail out
 	 * One exception: acpi=ht continues far enough to enumerate LAPICs
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 426e5d9..806b4e9 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -10,6 +10,7 @@
 #include <linux/dmi.h>
 #include <linux/cpumask.h>
 #include <asm/segment.h>
+#include <asm/desc.h>
 
 #include "realmode/wakeup.h"
 #include "sleep.h"
@@ -21,7 +22,7 @@ unsigned long acpi_realmode_flags;
 static unsigned long acpi_realmode;
 
 #if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
-static char temp_stack[10240];
+static char temp_stack[4096];
 #endif
 
 /**
@@ -97,7 +98,9 @@ int acpi_save_state_mem(void)
 #else /* CONFIG_64BIT */
 	header->trampoline_segment = setup_trampoline() >> 4;
 #ifdef CONFIG_SMP
-	stack_start.sp = temp_stack + 4096;
+	stack_start.sp = temp_stack + sizeof(temp_stack);
+	early_gdt_descr.address =
+			(unsigned long)get_cpu_gdt_table(smp_processor_id());
 #endif
 	initial_code = (unsigned long)wakeup_long64;
 	saved_magic = 0x123456789abcdef0;
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 65a0c1b..a84ac7b 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -231,25 +231,25 @@ static void alternatives_smp_lock(u8 **start, u8 **end, u8 *text, u8 *text_end)
 			continue;
 		if (*ptr > text_end)
 			continue;
-		text_poke(*ptr, ((unsigned char []){0xf0}), 1); /* add lock prefix */
+		/* turn DS segment override prefix into lock prefix */
+		text_poke(*ptr, ((unsigned char []){0xf0}), 1);
 	};
 }
 
 static void alternatives_smp_unlock(u8 **start, u8 **end, u8 *text, u8 *text_end)
 {
 	u8 **ptr;
-	char insn[1];
 
 	if (noreplace_smp)
 		return;
 
-	add_nops(insn, 1);
 	for (ptr = start; ptr < end; ptr++) {
 		if (*ptr < text)
 			continue;
 		if (*ptr > text_end)
 			continue;
-		text_poke(*ptr, insn, 1);
+		/* turn lock prefix into DS segment override prefix */
+		text_poke(*ptr, ((unsigned char []){0x3E}), 1);
 	};
 }
 
@@ -444,7 +444,7 @@ void __init alternative_instructions(void)
 					    _text, _etext);
 
 		/* Only switch to UP mode if we don't immediately boot others */
-		if (num_possible_cpus() == 1 || setup_max_cpus <= 1)
+		if (num_present_cpus() == 1 || setup_max_cpus <= 1)
 			alternatives_smp_switch(0);
 	}
 #endif
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 69b4d06..a8fd9eb 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -33,6 +33,10 @@
 
 static DEFINE_RWLOCK(amd_iommu_devtable_lock);
 
+/* A list of preallocated protection domains */
+static LIST_HEAD(iommu_pd_list);
+static DEFINE_SPINLOCK(iommu_pd_list_lock);
+
 /*
  * general struct to manage commands send to an IOMMU
  */
@@ -51,6 +55,102 @@ static int iommu_has_npcache(struct amd_iommu *iommu)
 
 /****************************************************************************
  *
+ * Interrupt handling functions
+ *
+ ****************************************************************************/
+
+static void iommu_print_event(void *__evt)
+{
+	u32 *event = __evt;
+	int type  = (event[1] >> EVENT_TYPE_SHIFT)  & EVENT_TYPE_MASK;
+	int devid = (event[0] >> EVENT_DEVID_SHIFT) & EVENT_DEVID_MASK;
+	int domid = (event[1] >> EVENT_DOMID_SHIFT) & EVENT_DOMID_MASK;
+	int flags = (event[1] >> EVENT_FLAGS_SHIFT) & EVENT_FLAGS_MASK;
+	u64 address = (u64)(((u64)event[3]) << 32) | event[2];
+
+	printk(KERN_ERR "AMD IOMMU: Event logged [");
+
+	switch (type) {
+	case EVENT_TYPE_ILL_DEV:
+		printk("ILLEGAL_DEV_TABLE_ENTRY device=%02x:%02x.%x "
+		       "address=0x%016llx flags=0x%04x]\n",
+		       PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid),
+		       address, flags);
+		break;
+	case EVENT_TYPE_IO_FAULT:
+		printk("IO_PAGE_FAULT device=%02x:%02x.%x "
+		       "domain=0x%04x address=0x%016llx flags=0x%04x]\n",
+		       PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid),
+		       domid, address, flags);
+		break;
+	case EVENT_TYPE_DEV_TAB_ERR:
+		printk("DEV_TAB_HARDWARE_ERROR device=%02x:%02x.%x "
+		       "address=0x%016llx flags=0x%04x]\n",
+		       PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid),
+		       address, flags);
+		break;
+	case EVENT_TYPE_PAGE_TAB_ERR:
+		printk("PAGE_TAB_HARDWARE_ERROR device=%02x:%02x.%x "
+		       "domain=0x%04x address=0x%016llx flags=0x%04x]\n",
+		       PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid),
+		       domid, address, flags);
+		break;
+	case EVENT_TYPE_ILL_CMD:
+		printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
+		break;
+	case EVENT_TYPE_CMD_HARD_ERR:
+		printk("COMMAND_HARDWARE_ERROR address=0x%016llx "
+		       "flags=0x%04x]\n", address, flags);
+		break;
+	case EVENT_TYPE_IOTLB_INV_TO:
+		printk("IOTLB_INV_TIMEOUT device=%02x:%02x.%x "
+		       "address=0x%016llx]\n",
+		       PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid),
+		       address);
+		break;
+	case EVENT_TYPE_INV_DEV_REQ:
+		printk("INVALID_DEVICE_REQUEST device=%02x:%02x.%x "
+		       "address=0x%016llx flags=0x%04x]\n",
+		       PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid),
+		       address, flags);
+		break;
+	default:
+		printk(KERN_ERR "UNKNOWN type=0x%02x]\n", type);
+	}
+}
+
+static void iommu_poll_events(struct amd_iommu *iommu)
+{
+	u32 head, tail;
+	unsigned long flags;
+
+	spin_lock_irqsave(&iommu->lock, flags);
+
+	head = readl(iommu->mmio_base + MMIO_EVT_HEAD_OFFSET);
+	tail = readl(iommu->mmio_base + MMIO_EVT_TAIL_OFFSET);
+
+	while (head != tail) {
+		iommu_print_event(iommu->evt_buf + head);
+		head = (head + EVENT_ENTRY_SIZE) % iommu->evt_buf_size;
+	}
+
+	writel(head, iommu->mmio_base + MMIO_EVT_HEAD_OFFSET);
+
+	spin_unlock_irqrestore(&iommu->lock, flags);
+}
+
+irqreturn_t amd_iommu_int_handler(int irq, void *data)
+{
+	struct amd_iommu *iommu;
+
+	list_for_each_entry(iommu, &amd_iommu_list, list)
+		iommu_poll_events(iommu);
+
+	return IRQ_HANDLED;
+}
+
+/****************************************************************************
+ *
  * IOMMU command queuing functions
  *
  ****************************************************************************/
@@ -101,10 +201,10 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
  */
 static int iommu_completion_wait(struct amd_iommu *iommu)
 {
-	int ret, ready = 0;
+	int ret = 0, ready = 0;
 	unsigned status = 0;
 	struct iommu_cmd cmd;
-	unsigned long i = 0;
+	unsigned long flags, i = 0;
 
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
@@ -112,10 +212,12 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 
 	iommu->need_sync = 0;
 
-	ret = iommu_queue_command(iommu, &cmd);
+	spin_lock_irqsave(&iommu->lock, flags);
+
+	ret = __iommu_queue_command(iommu, &cmd);
 
 	if (ret)
-		return ret;
+		goto out;
 
 	while (!ready && (i < EXIT_LOOP_COUNT)) {
 		++i;
@@ -130,6 +232,8 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 
 	if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
 		printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+out:
+	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	return 0;
 }
@@ -140,6 +244,7 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
 {
 	struct iommu_cmd cmd;
+	int ret;
 
 	BUG_ON(iommu == NULL);
 
@@ -147,9 +252,11 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
 	CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
 	cmd.data[0] = devid;
 
+	ret = iommu_queue_command(iommu, &cmd);
+
 	iommu->need_sync = 1;
 
-	return iommu_queue_command(iommu, &cmd);
+	return ret;
 }
 
 /*
@@ -159,6 +266,7 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
 		u64 address, u16 domid, int pde, int s)
 {
 	struct iommu_cmd cmd;
+	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
 	address &= PAGE_MASK;
@@ -171,9 +279,11 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
 	if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
 		cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
 
+	ret = iommu_queue_command(iommu, &cmd);
+
 	iommu->need_sync = 1;
 
-	return iommu_queue_command(iommu, &cmd);
+	return ret;
 }
 
 /*
@@ -185,7 +295,7 @@ static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
 		u64 address, size_t size)
 {
 	int s = 0;
-	unsigned pages = iommu_num_pages(address, size);
+	unsigned pages = iommu_num_pages(address, size, PAGE_SIZE);
 
 	address &= PAGE_MASK;
 
@@ -203,6 +313,14 @@ static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
 	return 0;
 }
 
+/* Flush the whole IO/TLB for a given protection domain */
+static void iommu_flush_tlb(struct amd_iommu *iommu, u16 domid)
+{
+	u64 address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
+
+	iommu_queue_inv_iommu_pages(iommu, address, domid, 0, 1);
+}
+
 /****************************************************************************
  *
  * The functions below are used the create the page table mappings for
@@ -362,11 +480,6 @@ static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
  * efficient allocator.
  *
  ****************************************************************************/
-static unsigned long dma_mask_to_pages(unsigned long mask)
-{
-	return (mask >> PAGE_SHIFT) +
-		(PAGE_ALIGN(mask & ~PAGE_MASK) >> PAGE_SHIFT);
-}
 
 /*
  * The address allocator core function.
@@ -375,25 +488,31 @@ static unsigned long dma_mask_to_pages(unsigned long mask)
  */
 static unsigned long dma_ops_alloc_addresses(struct device *dev,
 					     struct dma_ops_domain *dom,
-					     unsigned int pages)
+					     unsigned int pages,
+					     unsigned long align_mask,
+					     u64 dma_mask)
 {
-	unsigned long limit = dma_mask_to_pages(*dev->dma_mask);
+	unsigned long limit;
 	unsigned long address;
-	unsigned long size = dom->aperture_size >> PAGE_SHIFT;
 	unsigned long boundary_size;
 
 	boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
 			PAGE_SIZE) >> PAGE_SHIFT;
-	limit = limit < size ? limit : size;
+	limit = iommu_device_max_index(dom->aperture_size >> PAGE_SHIFT, 0,
+				       dma_mask >> PAGE_SHIFT);
 
-	if (dom->next_bit >= limit)
+	if (dom->next_bit >= limit) {
 		dom->next_bit = 0;
+		dom->need_flush = true;
+	}
 
 	address = iommu_area_alloc(dom->bitmap, limit, dom->next_bit, pages,
-			0 , boundary_size, 0);
-	if (address == -1)
+				   0 , boundary_size, align_mask);
+	if (address == -1) {
 		address = iommu_area_alloc(dom->bitmap, limit, 0, pages,
-				0, boundary_size, 0);
+				0, boundary_size, align_mask);
+		dom->need_flush = true;
+	}
 
 	if (likely(address != -1)) {
 		dom->next_bit = address + pages;
@@ -459,7 +578,7 @@ static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 	if (start_page + pages > last_page)
 		pages = last_page - start_page;
 
-	set_bit_string(dom->bitmap, start_page, pages);
+	iommu_area_reserve(dom->bitmap, start_page, pages);
 }
 
 static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom)
@@ -553,12 +672,16 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
 	dma_dom->bitmap[0] = 1;
 	dma_dom->next_bit = 0;
 
+	dma_dom->need_flush = false;
+	dma_dom->target_dev = 0xffff;
+
 	/* Intialize the exclusion range if necessary */
 	if (iommu->exclusion_start &&
 	    iommu->exclusion_start < dma_dom->aperture_size) {
 		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
 		int pages = iommu_num_pages(iommu->exclusion_start,
-					    iommu->exclusion_length);
+					    iommu->exclusion_length,
+					    PAGE_SIZE);
 		dma_ops_reserve_addresses(dma_dom, startpage, pages);
 	}
 
@@ -623,12 +746,13 @@ static void set_device_domain(struct amd_iommu *iommu,
 
 	u64 pte_root = virt_to_phys(domain->pt_root);
 
-	pte_root |= (domain->mode & 0x07) << 9;
-	pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | 2;
+	pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
+		    << DEV_ENTRY_MODE_SHIFT;
+	pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
 
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
-	amd_iommu_dev_table[devid].data[0] = pte_root;
-	amd_iommu_dev_table[devid].data[1] = pte_root >> 32;
+	amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
+	amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
 	amd_iommu_dev_table[devid].data[2] = domain->id;
 
 	amd_iommu_pd_table[devid] = domain;
@@ -646,6 +770,45 @@ static void set_device_domain(struct amd_iommu *iommu,
  *****************************************************************************/
 
 /*
+ * This function checks if the driver got a valid device from the caller to
+ * avoid dereferencing invalid pointers.
+ */
+static bool check_device(struct device *dev)
+{
+	if (!dev || !dev->dma_mask)
+		return false;
+
+	return true;
+}
+
+/*
+ * In this function the list of preallocated protection domains is traversed to
+ * find the domain for a specific device
+ */
+static struct dma_ops_domain *find_protection_domain(u16 devid)
+{
+	struct dma_ops_domain *entry, *ret = NULL;
+	unsigned long flags;
+
+	if (list_empty(&iommu_pd_list))
+		return NULL;
+
+	spin_lock_irqsave(&iommu_pd_list_lock, flags);
+
+	list_for_each_entry(entry, &iommu_pd_list, list) {
+		if (entry->target_dev == devid) {
+			ret = entry;
+			list_del(&ret->list);
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+
+	return ret;
+}
+
+/*
  * In the dma_ops path we only have the struct device. This function
  * finds the corresponding IOMMU, the protection domain and the
  * requestor id for a given device.
@@ -661,27 +824,30 @@ static int get_device_resources(struct device *dev,
 	struct pci_dev *pcidev;
 	u16 _bdf;
 
-	BUG_ON(!dev || dev->bus != &pci_bus_type || !dev->dma_mask);
+	*iommu = NULL;
+	*domain = NULL;
+	*bdf = 0xffff;
+
+	if (dev->bus != &pci_bus_type)
+		return 0;
 
 	pcidev = to_pci_dev(dev);
 	_bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
 
 	/* device not translated by any IOMMU in the system? */
-	if (_bdf > amd_iommu_last_bdf) {
-		*iommu = NULL;
-		*domain = NULL;
-		*bdf = 0xffff;
+	if (_bdf > amd_iommu_last_bdf)
 		return 0;
-	}
 
 	*bdf = amd_iommu_alias_table[_bdf];
 
 	*iommu = amd_iommu_rlookup_table[*bdf];
 	if (*iommu == NULL)
 		return 0;
-	dma_dom = (*iommu)->default_dom;
 	*domain = domain_for_device(*bdf);
 	if (*domain == NULL) {
+		dma_dom = find_protection_domain(*bdf);
+		if (!dma_dom)
+			dma_dom = (*iommu)->default_dom;
 		*domain = &dma_dom->domain;
 		set_device_domain(*iommu, *domain, *bdf);
 		printk(KERN_INFO "AMD IOMMU: Using protection domain %d for "
@@ -760,17 +926,24 @@ static dma_addr_t __map_single(struct device *dev,
 			       struct dma_ops_domain *dma_dom,
 			       phys_addr_t paddr,
 			       size_t size,
-			       int dir)
+			       int dir,
+			       bool align,
+			       u64 dma_mask)
 {
 	dma_addr_t offset = paddr & ~PAGE_MASK;
 	dma_addr_t address, start;
 	unsigned int pages;
+	unsigned long align_mask = 0;
 	int i;
 
-	pages = iommu_num_pages(paddr, size);
+	pages = iommu_num_pages(paddr, size, PAGE_SIZE);
 	paddr &= PAGE_MASK;
 
-	address = dma_ops_alloc_addresses(dev, dma_dom, pages);
+	if (align)
+		align_mask = (1UL << get_order(size)) - 1;
+
+	address = dma_ops_alloc_addresses(dev, dma_dom, pages, align_mask,
+					  dma_mask);
 	if (unlikely(address == bad_dma_address))
 		goto out;
 
@@ -782,6 +955,12 @@ static dma_addr_t __map_single(struct device *dev,
 	}
 	address += offset;
 
+	if (unlikely(dma_dom->need_flush && !amd_iommu_unmap_flush)) {
+		iommu_flush_tlb(iommu, dma_dom->domain.id);
+		dma_dom->need_flush = false;
+	} else if (unlikely(iommu_has_npcache(iommu)))
+		iommu_flush_pages(iommu, dma_dom->domain.id, address, size);
+
 out:
 	return address;
 }
@@ -802,7 +981,7 @@ static void __unmap_single(struct amd_iommu *iommu,
 	if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
 		return;
 
-	pages = iommu_num_pages(dma_addr, size);
+	pages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
 	dma_addr &= PAGE_MASK;
 	start = dma_addr;
 
@@ -812,6 +991,9 @@ static void __unmap_single(struct amd_iommu *iommu,
 	}
 
 	dma_ops_free_addresses(dma_dom, dma_addr, pages);
+
+	if (amd_iommu_unmap_flush)
+		iommu_flush_pages(iommu, dma_dom->domain.id, dma_addr, size);
 }
 
 /*
@@ -825,6 +1007,12 @@ static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
 	struct protection_domain *domain;
 	u16 devid;
 	dma_addr_t addr;
+	u64 dma_mask;
+
+	if (!check_device(dev))
+		return bad_dma_address;
+
+	dma_mask = *dev->dma_mask;
 
 	get_device_resources(dev, &iommu, &domain, &devid);
 
@@ -833,14 +1021,12 @@ static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
 		return (dma_addr_t)paddr;
 
 	spin_lock_irqsave(&domain->lock, flags);
-	addr = __map_single(dev, iommu, domain->priv, paddr, size, dir);
+	addr = __map_single(dev, iommu, domain->priv, paddr, size, dir, false,
+			    dma_mask);
 	if (addr == bad_dma_address)
 		goto out;
 
-	if (iommu_has_npcache(iommu))
-		iommu_flush_pages(iommu, domain->id, addr, size);
-
-	if (iommu->need_sync)
+	if (unlikely(iommu->need_sync))
 		iommu_completion_wait(iommu);
 
 out:
@@ -860,7 +1046,8 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
 	struct protection_domain *domain;
 	u16 devid;
 
-	if (!get_device_resources(dev, &iommu, &domain, &devid))
+	if (!check_device(dev) ||
+	    !get_device_resources(dev, &iommu, &domain, &devid))
 		/* device not handled by any AMD IOMMU */
 		return;
 
@@ -868,9 +1055,7 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
 
 	__unmap_single(iommu, domain->priv, dma_addr, size, dir);
 
-	iommu_flush_pages(iommu, domain->id, dma_addr, size);
-
-	if (iommu->need_sync)
+	if (unlikely(iommu->need_sync))
 		iommu_completion_wait(iommu);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -909,6 +1094,12 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 	struct scatterlist *s;
 	phys_addr_t paddr;
 	int mapped_elems = 0;
+	u64 dma_mask;
+
+	if (!check_device(dev))
+		return 0;
+
+	dma_mask = *dev->dma_mask;
 
 	get_device_resources(dev, &iommu, &domain, &devid);
 
@@ -921,19 +1112,17 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 		paddr = sg_phys(s);
 
 		s->dma_address = __map_single(dev, iommu, domain->priv,
-					      paddr, s->length, dir);
+					      paddr, s->length, dir, false,
+					      dma_mask);
 
 		if (s->dma_address) {
 			s->dma_length = s->length;
 			mapped_elems++;
 		} else
 			goto unmap;
-		if (iommu_has_npcache(iommu))
-			iommu_flush_pages(iommu, domain->id, s->dma_address,
-					  s->dma_length);
 	}
 
-	if (iommu->need_sync)
+	if (unlikely(iommu->need_sync))
 		iommu_completion_wait(iommu);
 
 out:
@@ -967,7 +1156,8 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist,
 	u16 devid;
 	int i;
 
-	if (!get_device_resources(dev, &iommu, &domain, &devid))
+	if (!check_device(dev) ||
+	    !get_device_resources(dev, &iommu, &domain, &devid))
 		return;
 
 	spin_lock_irqsave(&domain->lock, flags);
@@ -975,12 +1165,10 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist,
 	for_each_sg(sglist, s, nelems, i) {
 		__unmap_single(iommu, domain->priv, s->dma_address,
 			       s->dma_length, dir);
-		iommu_flush_pages(iommu, domain->id, s->dma_address,
-				  s->dma_length);
 		s->dma_address = s->dma_length = 0;
 	}
 
-	if (iommu->need_sync)
+	if (unlikely(iommu->need_sync))
 		iommu_completion_wait(iommu);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -998,25 +1186,33 @@ static void *alloc_coherent(struct device *dev, size_t size,
 	struct protection_domain *domain;
 	u16 devid;
 	phys_addr_t paddr;
+	u64 dma_mask = dev->coherent_dma_mask;
+
+	if (!check_device(dev))
+		return NULL;
 
+	if (!get_device_resources(dev, &iommu, &domain, &devid))
+		flag &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+
+	flag |= __GFP_ZERO;
 	virt_addr = (void *)__get_free_pages(flag, get_order(size));
 	if (!virt_addr)
 		return 0;
 
-	memset(virt_addr, 0, size);
 	paddr = virt_to_phys(virt_addr);
 
-	get_device_resources(dev, &iommu, &domain, &devid);
-
 	if (!iommu || !domain) {
 		*dma_addr = (dma_addr_t)paddr;
 		return virt_addr;
 	}
 
+	if (!dma_mask)
+		dma_mask = *dev->dma_mask;
+
 	spin_lock_irqsave(&domain->lock, flags);
 
 	*dma_addr = __map_single(dev, iommu, domain->priv, paddr,
-				 size, DMA_BIDIRECTIONAL);
+				 size, DMA_BIDIRECTIONAL, true, dma_mask);
 
 	if (*dma_addr == bad_dma_address) {
 		free_pages((unsigned long)virt_addr, get_order(size));
@@ -1024,10 +1220,7 @@ static void *alloc_coherent(struct device *dev, size_t size,
 		goto out;
 	}
 
-	if (iommu_has_npcache(iommu))
-		iommu_flush_pages(iommu, domain->id, *dma_addr, size);
-
-	if (iommu->need_sync)
+	if (unlikely(iommu->need_sync))
 		iommu_completion_wait(iommu);
 
 out:
@@ -1038,8 +1231,6 @@ out:
 
 /*
  * The exported free_coherent function for dma_ops.
- * FIXME: fix the generic x86 DMA layer so that it actually calls that
- *        function.
  */
 static void free_coherent(struct device *dev, size_t size,
 			  void *virt_addr, dma_addr_t dma_addr)
@@ -1049,6 +1240,9 @@ static void free_coherent(struct device *dev, size_t size,
 	struct protection_domain *domain;
 	u16 devid;
 
+	if (!check_device(dev))
+		return;
+
 	get_device_resources(dev, &iommu, &domain, &devid);
 
 	if (!iommu || !domain)
@@ -1057,9 +1251,8 @@ static void free_coherent(struct device *dev, size_t size,
 	spin_lock_irqsave(&domain->lock, flags);
 
 	__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
-	iommu_flush_pages(iommu, domain->id, dma_addr, size);
 
-	if (iommu->need_sync)
+	if (unlikely(iommu->need_sync))
 		iommu_completion_wait(iommu);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1069,6 +1262,30 @@ free_mem:
 }
 
 /*
+ * This function is called by the DMA layer to find out if we can handle a
+ * particular device. It is part of the dma_ops.
+ */
+static int amd_iommu_dma_supported(struct device *dev, u64 mask)
+{
+	u16 bdf;
+	struct pci_dev *pcidev;
+
+	/* No device or no PCI device */
+	if (!dev || dev->bus != &pci_bus_type)
+		return 0;
+
+	pcidev = to_pci_dev(dev);
+
+	bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
+
+	/* Out of our scope? */
+	if (bdf > amd_iommu_last_bdf)
+		return 0;
+
+	return 1;
+}
+
+/*
  * The function for pre-allocating protection domains.
  *
  * If the driver core informs the DMA layer if a driver grabs a device
@@ -1097,10 +1314,9 @@ void prealloc_protection_domains(void)
 		if (!dma_dom)
 			continue;
 		init_unity_mappings_for_device(dma_dom, devid);
-		set_device_domain(iommu, &dma_dom->domain, devid);
-		printk(KERN_INFO "AMD IOMMU: Allocated domain %d for device ",
-		       dma_dom->domain.id);
-		print_devid(devid, 1);
+		dma_dom->target_dev = devid;
+
+		list_add_tail(&dma_dom->list, &iommu_pd_list);
 	}
 }
 
@@ -1111,6 +1327,7 @@ static struct dma_mapping_ops amd_iommu_dma_ops = {
 	.unmap_single = unmap_single,
 	.map_sg = map_sg,
 	.unmap_sg = unmap_sg,
+	.dma_supported = amd_iommu_dma_supported,
 };
 
 /*
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index a69cc0f..0cdcda3 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -22,6 +22,8 @@
 #include <linux/gfp.h>
 #include <linux/list.h>
 #include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/msi.h>
 #include <asm/pci-direct.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
@@ -30,7 +32,6 @@
 /*
  * definitions for the ACPI scanning code
  */
-#define PCI_BUS(x) (((x) >> 8) & 0xff)
 #define IVRS_HEADER_LENGTH 48
 
 #define ACPI_IVHD_TYPE                  0x10
@@ -121,6 +122,7 @@ LIST_HEAD(amd_iommu_unity_map);		/* a list of required unity mappings
 					   we find in ACPI */
 unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */
 int amd_iommu_isolate;			/* if 1, device isolation is enabled */
+bool amd_iommu_unmap_flush;		/* if true, flush on every unmap */
 
 LIST_HEAD(amd_iommu_list);		/* list of all AMD IOMMUs in the
 					   system */
@@ -210,7 +212,7 @@ static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
 /* Programs the physical address of the device table into the IOMMU hardware */
 static void __init iommu_set_device_table(struct amd_iommu *iommu)
 {
-	u32 entry;
+	u64 entry;
 
 	BUG_ON(iommu->mmio_base == NULL);
 
@@ -234,7 +236,7 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
 {
 	u32 ctrl;
 
-	ctrl = (u64)readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
 	ctrl &= ~(1 << bit);
 	writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
 }
@@ -242,13 +244,23 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
 /* Function to enable the hardware */
 void __init iommu_enable(struct amd_iommu *iommu)
 {
-	printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at ");
-	print_devid(iommu->devid, 0);
-	printk(" cap 0x%hx\n", iommu->cap_ptr);
+	printk(KERN_INFO "AMD IOMMU: Enabling IOMMU "
+	       "at %02x:%02x.%x cap 0x%hx\n",
+	       iommu->dev->bus->number,
+	       PCI_SLOT(iommu->dev->devfn),
+	       PCI_FUNC(iommu->dev->devfn),
+	       iommu->cap_ptr);
 
 	iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
 }
 
+/* Function to enable IOMMU event logging and event interrupts */
+void __init iommu_enable_event_logging(struct amd_iommu *iommu)
+{
+	iommu_feature_enable(iommu, CONTROL_EVT_LOG_EN);
+	iommu_feature_enable(iommu, CONTROL_EVT_INT_EN);
+}
+
 /*
  * mapping and unmapping functions for the IOMMU MMIO space. Each AMD IOMMU in
  * the system has one.
@@ -286,6 +298,14 @@ static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu)
  ****************************************************************************/
 
 /*
+ * This function calculates the length of a given IVHD entry
+ */
+static inline int ivhd_entry_length(u8 *ivhd)
+{
+	return 0x04 << (*ivhd >> 6);
+}
+
+/*
  * This function reads the last device id the IOMMU has to handle from the PCI
  * capability header for this IOMMU
  */
@@ -329,7 +349,7 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
 		default:
 			break;
 		}
-		p += 0x04 << (*p >> 6);
+		p += ivhd_entry_length(p);
 	}
 
 	WARN_ON(p != end);
@@ -414,7 +434,32 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 
 static void __init free_command_buffer(struct amd_iommu *iommu)
 {
-	free_pages((unsigned long)iommu->cmd_buf, get_order(CMD_BUFFER_SIZE));
+	free_pages((unsigned long)iommu->cmd_buf,
+		   get_order(iommu->cmd_buf_size));
+}
+
+/* allocates the memory where the IOMMU will log its events to */
+static u8 * __init alloc_event_buffer(struct amd_iommu *iommu)
+{
+	u64 entry;
+	iommu->evt_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+						get_order(EVT_BUFFER_SIZE));
+
+	if (iommu->evt_buf == NULL)
+		return NULL;
+
+	entry = (u64)virt_to_phys(iommu->evt_buf) | EVT_LEN_MASK;
+	memcpy_toio(iommu->mmio_base + MMIO_EVT_BUF_OFFSET,
+		    &entry, sizeof(entry));
+
+	iommu->evt_buf_size = EVT_BUFFER_SIZE;
+
+	return iommu->evt_buf;
+}
+
+static void __init free_event_buffer(struct amd_iommu *iommu)
+{
+	free_pages((unsigned long)iommu->evt_buf, get_order(EVT_BUFFER_SIZE));
 }
 
 /* sets a specific bit in the device table entry. */
@@ -487,19 +532,21 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
  */
 static void __init init_iommu_from_pci(struct amd_iommu *iommu)
 {
-	int bus = PCI_BUS(iommu->devid);
-	int dev = PCI_SLOT(iommu->devid);
-	int fn  = PCI_FUNC(iommu->devid);
 	int cap_ptr = iommu->cap_ptr;
-	u32 range;
+	u32 range, misc;
 
-	iommu->cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_CAP_HDR_OFFSET);
+	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
+			      &iommu->cap);
+	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_RANGE_OFFSET,
+			      &range);
+	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_MISC_OFFSET,
+			      &misc);
 
-	range = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
 	iommu->first_device = calc_devid(MMIO_GET_BUS(range),
 					 MMIO_GET_FD(range));
 	iommu->last_device = calc_devid(MMIO_GET_BUS(range),
 					MMIO_GET_LD(range));
+	iommu->evt_msi_num = MMIO_MSI_NUM(misc);
 }
 
 /*
@@ -604,7 +651,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 			break;
 		}
 
-		p += 0x04 << (e->type >> 6);
+		p += ivhd_entry_length(p);
 	}
 }
 
@@ -622,6 +669,7 @@ static int __init init_iommu_devices(struct amd_iommu *iommu)
 static void __init free_iommu_one(struct amd_iommu *iommu)
 {
 	free_command_buffer(iommu);
+	free_event_buffer(iommu);
 	iommu_unmap_mmio_space(iommu);
 }
 
@@ -649,8 +697,12 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 	/*
 	 * Copy data from ACPI table entry to the iommu struct
 	 */
-	iommu->devid = h->devid;
+	iommu->dev = pci_get_bus_and_slot(PCI_BUS(h->devid), h->devid & 0xff);
+	if (!iommu->dev)
+		return 1;
+
 	iommu->cap_ptr = h->cap_ptr;
+	iommu->pci_seg = h->pci_seg;
 	iommu->mmio_phys = h->mmio_phys;
 	iommu->mmio_base = iommu_map_mmio_space(h->mmio_phys);
 	if (!iommu->mmio_base)
@@ -661,11 +713,17 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 	if (!iommu->cmd_buf)
 		return -ENOMEM;
 
+	iommu->evt_buf = alloc_event_buffer(iommu);
+	if (!iommu->evt_buf)
+		return -ENOMEM;
+
+	iommu->int_enabled = false;
+
 	init_iommu_from_pci(iommu);
 	init_iommu_from_acpi(iommu, h);
 	init_iommu_devices(iommu);
 
-	return 0;
+	return pci_enable_device(iommu->dev);
 }
 
 /*
@@ -706,6 +764,95 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 
 /****************************************************************************
  *
+ * The following functions initialize the MSI interrupts for all IOMMUs
+ * in the system. Its a bit challenging because there could be multiple
+ * IOMMUs per PCI BDF but we can call pci_enable_msi(x) only once per
+ * pci_dev.
+ *
+ ****************************************************************************/
+
+static int __init iommu_setup_msix(struct amd_iommu *iommu)
+{
+	struct amd_iommu *curr;
+	struct msix_entry entries[32]; /* only 32 supported by AMD IOMMU */
+	int nvec = 0, i;
+
+	list_for_each_entry(curr, &amd_iommu_list, list) {
+		if (curr->dev == iommu->dev) {
+			entries[nvec].entry = curr->evt_msi_num;
+			entries[nvec].vector = 0;
+			curr->int_enabled = true;
+			nvec++;
+		}
+	}
+
+	if (pci_enable_msix(iommu->dev, entries, nvec)) {
+		pci_disable_msix(iommu->dev);
+		return 1;
+	}
+
+	for (i = 0; i < nvec; ++i) {
+		int r = request_irq(entries->vector, amd_iommu_int_handler,
+				    IRQF_SAMPLE_RANDOM,
+				    "AMD IOMMU",
+				    NULL);
+		if (r)
+			goto out_free;
+	}
+
+	return 0;
+
+out_free:
+	for (i -= 1; i >= 0; --i)
+		free_irq(entries->vector, NULL);
+
+	pci_disable_msix(iommu->dev);
+
+	return 1;
+}
+
+static int __init iommu_setup_msi(struct amd_iommu *iommu)
+{
+	int r;
+	struct amd_iommu *curr;
+
+	list_for_each_entry(curr, &amd_iommu_list, list) {
+		if (curr->dev == iommu->dev)
+			curr->int_enabled = true;
+	}
+
+
+	if (pci_enable_msi(iommu->dev))
+		return 1;
+
+	r = request_irq(iommu->dev->irq, amd_iommu_int_handler,
+			IRQF_SAMPLE_RANDOM,
+			"AMD IOMMU",
+			NULL);
+
+	if (r) {
+		pci_disable_msi(iommu->dev);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int __init iommu_init_msi(struct amd_iommu *iommu)
+{
+	if (iommu->int_enabled)
+		return 0;
+
+	if (pci_find_capability(iommu->dev, PCI_CAP_ID_MSIX))
+		return iommu_setup_msix(iommu);
+	else if (pci_find_capability(iommu->dev, PCI_CAP_ID_MSI))
+		return iommu_setup_msi(iommu);
+
+	return 1;
+}
+
+/****************************************************************************
+ *
  * The next functions belong to the third pass of parsing the ACPI
  * table. In this last pass the memory mapping requirements are
  * gathered (like exclusion and unity mapping reanges).
@@ -811,7 +958,6 @@ static void init_device_table(void)
 	for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
 		set_dev_entry_bit(devid, DEV_ENTRY_VALID);
 		set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION);
-		set_dev_entry_bit(devid, DEV_ENTRY_NO_PAGE_FAULT);
 	}
 }
 
@@ -825,6 +971,8 @@ static void __init enable_iommus(void)
 
 	list_for_each_entry(iommu, &amd_iommu_list, list) {
 		iommu_set_exclusion_range(iommu);
+		iommu_init_msi(iommu);
+		iommu_enable_event_logging(iommu);
 		iommu_enable(iommu);
 	}
 }
@@ -995,11 +1143,17 @@ int __init amd_iommu_init(void)
 	else
 		printk("disabled\n");
 
+	if (amd_iommu_unmap_flush)
+		printk(KERN_INFO "AMD IOMMU: IO/TLB flush on unmap enabled\n");
+	else
+		printk(KERN_INFO "AMD IOMMU: Lazy IO/TLB flushing enabled\n");
+
 out:
 	return ret;
 
 free:
-	free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1);
+	free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
+		   get_order(MAX_DOMAIN_ID/8));
 
 	free_pages((unsigned long)amd_iommu_pd_table,
 		   get_order(rlookup_table_size));
@@ -1057,8 +1211,10 @@ void __init amd_iommu_detect(void)
 static int __init parse_amd_iommu_options(char *str)
 {
 	for (; *str; ++str) {
-		if (strcmp(str, "isolate") == 0)
+		if (strncmp(str, "isolate", 7) == 0)
 			amd_iommu_isolate = 1;
+		if (strncmp(str, "fullflush", 11) == 0)
+			amd_iommu_unmap_flush = true;
 	}
 
 	return 1;
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 44e2182..9a32b37 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -455,11 +455,11 @@ out:
 		   force_iommu ||
 		   valid_agp ||
 		   fallback_aper_force) {
-		printk(KERN_ERR
+		printk(KERN_INFO
 			"Your BIOS doesn't leave a aperture memory hole\n");
-		printk(KERN_ERR
+		printk(KERN_INFO
 			"Please enable the IOMMU option in the BIOS setup\n");
-		printk(KERN_ERR
+		printk(KERN_INFO
 			"This costs you %d MB of RAM\n",
 				32 << fallback_aper_order);
 
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
new file mode 100644
index 0000000..04a7f96
--- /dev/null
+++ b/arch/x86/kernel/apic.c
@@ -0,0 +1,2238 @@
+/*
+ *	Local APIC handling, local APIC timers
+ *
+ *	(c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ *	Fixes
+ *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
+ *					thanks to Eric Gilmore
+ *					and Rolf G. Tews
+ *					for testing these extensively.
+ *	Maciej W. Rozycki	:	Various updates and fixes.
+ *	Mikael Pettersson	:	Power Management for UP-APIC.
+ *	Pavel Machek and
+ *	Mikael Pettersson	:	PM converted to driver model.
+ */
+
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/ioport.h>
+#include <linux/cpu.h>
+#include <linux/clockchips.h>
+#include <linux/acpi_pmtmr.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/dmar.h>
+
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/desc.h>
+#include <asm/arch_hooks.h>
+#include <asm/hpet.h>
+#include <asm/pgalloc.h>
+#include <asm/i8253.h>
+#include <asm/nmi.h>
+#include <asm/idle.h>
+#include <asm/proto.h>
+#include <asm/timex.h>
+#include <asm/apic.h>
+#include <asm/i8259.h>
+
+#include <mach_apic.h>
+#include <mach_apicdef.h>
+#include <mach_ipi.h>
+
+/*
+ * Sanity check
+ */
+#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
+# error SPURIOUS_APIC_VECTOR definition error
+#endif
+
+#ifdef CONFIG_X86_32
+/*
+ * Knob to control our willingness to enable the local APIC.
+ *
+ * +1=force-enable
+ */
+static int force_enable_local_apic;
+/*
+ * APIC command line parameters
+ */
+static int __init parse_lapic(char *arg)
+{
+	force_enable_local_apic = 1;
+	return 0;
+}
+early_param("lapic", parse_lapic);
+/* Local APIC was disabled by the BIOS and enabled by the kernel */
+static int enabled_via_apicbase;
+
+#endif
+
+#ifdef CONFIG_X86_64
+static int apic_calibrate_pmtmr __initdata;
+static __init int setup_apicpmtimer(char *s)
+{
+	apic_calibrate_pmtmr = 1;
+	notsc_setup(NULL);
+	return 0;
+}
+__setup("apicpmtimer", setup_apicpmtimer);
+#endif
+
+#ifdef CONFIG_X86_64
+#define HAVE_X2APIC
+#endif
+
+#ifdef HAVE_X2APIC
+int x2apic;
+/* x2apic enabled before OS handover */
+int x2apic_preenabled;
+int disable_x2apic;
+static __init int setup_nox2apic(char *str)
+{
+	disable_x2apic = 1;
+	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+	return 0;
+}
+early_param("nox2apic", setup_nox2apic);
+#endif
+
+unsigned long mp_lapic_addr;
+int disable_apic;
+/* Disable local APIC timer from the kernel commandline or via dmi quirk */
+static int disable_apic_timer __cpuinitdata;
+/* Local APIC timer works in C2 */
+int local_apic_timer_c2_ok;
+EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
+
+int first_system_vector = 0xfe;
+
+char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
+
+/*
+ * Debug level, exported for io_apic.c
+ */
+unsigned int apic_verbosity;
+
+int pic_mode;
+
+/* Have we found an MP table */
+int smp_found_config;
+
+static struct resource lapic_resource = {
+	.name = "Local APIC",
+	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
+};
+
+static unsigned int calibration_result;
+
+static int lapic_next_event(unsigned long delta,
+			    struct clock_event_device *evt);
+static void lapic_timer_setup(enum clock_event_mode mode,
+			      struct clock_event_device *evt);
+static void lapic_timer_broadcast(cpumask_t mask);
+static void apic_pm_activate(void);
+
+/*
+ * The local apic timer can be used for any function which is CPU local.
+ */
+static struct clock_event_device lapic_clockevent = {
+	.name		= "lapic",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
+			| CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
+	.shift		= 32,
+	.set_mode	= lapic_timer_setup,
+	.set_next_event	= lapic_next_event,
+	.broadcast	= lapic_timer_broadcast,
+	.rating		= 100,
+	.irq		= -1,
+};
+static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
+
+static unsigned long apic_phys;
+
+/*
+ * Get the LAPIC version
+ */
+static inline int lapic_get_version(void)
+{
+	return GET_APIC_VERSION(apic_read(APIC_LVR));
+}
+
+/*
+ * Check, if the APIC is integrated or a separate chip
+ */
+static inline int lapic_is_integrated(void)
+{
+#ifdef CONFIG_X86_64
+	return 1;
+#else
+	return APIC_INTEGRATED(lapic_get_version());
+#endif
+}
+
+/*
+ * Check, whether this is a modern or a first generation APIC
+ */
+static int modern_apic(void)
+{
+	/* AMD systems use old APIC versions, so check the CPU */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+	    boot_cpu_data.x86 >= 0xf)
+		return 1;
+	return lapic_get_version() >= 0x14;
+}
+
+/*
+ * Paravirt kernels also might be using these below ops. So we still
+ * use generic apic_read()/apic_write(), which might be pointing to different
+ * ops in PARAVIRT case.
+ */
+void xapic_wait_icr_idle(void)
+{
+	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
+		cpu_relax();
+}
+
+u32 safe_xapic_wait_icr_idle(void)
+{
+	u32 send_status;
+	int timeout;
+
+	timeout = 0;
+	do {
+		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+		if (!send_status)
+			break;
+		udelay(100);
+	} while (timeout++ < 1000);
+
+	return send_status;
+}
+
+void xapic_icr_write(u32 low, u32 id)
+{
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
+	apic_write(APIC_ICR, low);
+}
+
+u64 xapic_icr_read(void)
+{
+	u32 icr1, icr2;
+
+	icr2 = apic_read(APIC_ICR2);
+	icr1 = apic_read(APIC_ICR);
+
+	return icr1 | ((u64)icr2 << 32);
+}
+
+static struct apic_ops xapic_ops = {
+	.read = native_apic_mem_read,
+	.write = native_apic_mem_write,
+	.icr_read = xapic_icr_read,
+	.icr_write = xapic_icr_write,
+	.wait_icr_idle = xapic_wait_icr_idle,
+	.safe_wait_icr_idle = safe_xapic_wait_icr_idle,
+};
+
+struct apic_ops __read_mostly *apic_ops = &xapic_ops;
+EXPORT_SYMBOL_GPL(apic_ops);
+
+#ifdef HAVE_X2APIC
+static void x2apic_wait_icr_idle(void)
+{
+	/* no need to wait for icr idle in x2apic */
+	return;
+}
+
+static u32 safe_x2apic_wait_icr_idle(void)
+{
+	/* no need to wait for icr idle in x2apic */
+	return 0;
+}
+
+void x2apic_icr_write(u32 low, u32 id)
+{
+	wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
+}
+
+u64 x2apic_icr_read(void)
+{
+	unsigned long val;
+
+	rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
+	return val;
+}
+
+static struct apic_ops x2apic_ops = {
+	.read = native_apic_msr_read,
+	.write = native_apic_msr_write,
+	.icr_read = x2apic_icr_read,
+	.icr_write = x2apic_icr_write,
+	.wait_icr_idle = x2apic_wait_icr_idle,
+	.safe_wait_icr_idle = safe_x2apic_wait_icr_idle,
+};
+#endif
+
+/**
+ * enable_NMI_through_LVT0 - enable NMI through local vector table 0
+ */
+void __cpuinit enable_NMI_through_LVT0(void)
+{
+	unsigned int v;
+
+	/* unmask and set to NMI */
+	v = APIC_DM_NMI;
+
+	/* Level triggered for 82489DX (32bit mode) */
+	if (!lapic_is_integrated())
+		v |= APIC_LVT_LEVEL_TRIGGER;
+
+	apic_write(APIC_LVT0, v);
+}
+
+#ifdef CONFIG_X86_32
+/**
+ * get_physical_broadcast - Get number of physical broadcast IDs
+ */
+int get_physical_broadcast(void)
+{
+	return modern_apic() ? 0xff : 0xf;
+}
+#endif
+
+/**
+ * lapic_get_maxlvt - get the maximum number of local vector table entries
+ */
+int lapic_get_maxlvt(void)
+{
+	unsigned int v;
+
+	v = apic_read(APIC_LVR);
+	/*
+	 * - we always have APIC integrated on 64bit mode
+	 * - 82489DXs do not report # of LVT entries
+	 */
+	return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
+}
+
+/*
+ * Local APIC timer
+ */
+
+/* Clock divisor */
+#define APIC_DIVISOR 16
+
+/*
+ * This function sets up the local APIC timer, with a timeout of
+ * 'clocks' APIC bus clock. During calibration we actually call
+ * this function twice on the boot CPU, once with a bogus timeout
+ * value, second time for real. The other (noncalibrating) CPUs
+ * call this function only once, with the real, calibrated value.
+ *
+ * We do reads before writes even if unnecessary, to get around the
+ * P5 APIC double write bug.
+ */
+static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
+{
+	unsigned int lvtt_value, tmp_value;
+
+	lvtt_value = LOCAL_TIMER_VECTOR;
+	if (!oneshot)
+		lvtt_value |= APIC_LVT_TIMER_PERIODIC;
+	if (!lapic_is_integrated())
+		lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
+
+	if (!irqen)
+		lvtt_value |= APIC_LVT_MASKED;
+
+	apic_write(APIC_LVTT, lvtt_value);
+
+	/*
+	 * Divide PICLK by 16
+	 */
+	tmp_value = apic_read(APIC_TDCR);
+	apic_write(APIC_TDCR,
+		(tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+		APIC_TDR_DIV_16);
+
+	if (!oneshot)
+		apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
+}
+
+/*
+ * Setup extended LVT, AMD specific (K8, family 10h)
+ *
+ * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
+ * MCE interrupts are supported. Thus MCE offset must be set to 0.
+ *
+ * If mask=1, the LVT entry does not generate interrupts while mask=0
+ * enables the vector. See also the BKDGs.
+ */
+
+#define APIC_EILVT_LVTOFF_MCE 0
+#define APIC_EILVT_LVTOFF_IBS 1
+
+static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
+{
+	unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+	unsigned int  v   = (mask << 16) | (msg_type << 8) | vector;
+
+	apic_write(reg, v);
+}
+
+u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
+{
+	setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
+	return APIC_EILVT_LVTOFF_MCE;
+}
+
+u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
+{
+	setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
+	return APIC_EILVT_LVTOFF_IBS;
+}
+EXPORT_SYMBOL_GPL(setup_APIC_eilvt_ibs);
+
+/*
+ * Program the next event, relative to now
+ */
+static int lapic_next_event(unsigned long delta,
+			    struct clock_event_device *evt)
+{
+	apic_write(APIC_TMICT, delta);
+	return 0;
+}
+
+/*
+ * Setup the lapic timer in periodic or oneshot mode
+ */
+static void lapic_timer_setup(enum clock_event_mode mode,
+			      struct clock_event_device *evt)
+{
+	unsigned long flags;
+	unsigned int v;
+
+	/* Lapic used as dummy for broadcast ? */
+	if (evt->features & CLOCK_EVT_FEAT_DUMMY)
+		return;
+
+	local_irq_save(flags);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+	case CLOCK_EVT_MODE_ONESHOT:
+		__setup_APIC_LVTT(calibration_result,
+				  mode != CLOCK_EVT_MODE_PERIODIC, 1);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		v = apic_read(APIC_LVTT);
+		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+		apic_write(APIC_LVTT, v);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		/* Nothing to do here */
+		break;
+	}
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Local APIC timer broadcast function
+ */
+static void lapic_timer_broadcast(cpumask_t mask)
+{
+#ifdef CONFIG_SMP
+	send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
+#endif
+}
+
+/*
+ * Setup the local APIC timer for this CPU. Copy the initilized values
+ * of the boot CPU and register the clock event in the framework.
+ */
+static void __cpuinit setup_APIC_timer(void)
+{
+	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
+
+	memcpy(levt, &lapic_clockevent, sizeof(*levt));
+	levt->cpumask = cpumask_of_cpu(smp_processor_id());
+
+	clockevents_register_device(levt);
+}
+
+/*
+ * In this functions we calibrate APIC bus clocks to the external timer.
+ *
+ * We want to do the calibration only once since we want to have local timer
+ * irqs syncron. CPUs connected by the same APIC bus have the very same bus
+ * frequency.
+ *
+ * This was previously done by reading the PIT/HPET and waiting for a wrap
+ * around to find out, that a tick has elapsed. I have a box, where the PIT
+ * readout is broken, so it never gets out of the wait loop again. This was
+ * also reported by others.
+ *
+ * Monitoring the jiffies value is inaccurate and the clockevents
+ * infrastructure allows us to do a simple substitution of the interrupt
+ * handler.
+ *
+ * The calibration routine also uses the pm_timer when possible, as the PIT
+ * happens to run way too slow (factor 2.3 on my VAIO CoreDuo, which goes
+ * back to normal later in the boot process).
+ */
+
+#define LAPIC_CAL_LOOPS		(HZ/10)
+
+static __initdata int lapic_cal_loops = -1;
+static __initdata long lapic_cal_t1, lapic_cal_t2;
+static __initdata unsigned long long lapic_cal_tsc1, lapic_cal_tsc2;
+static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2;
+static __initdata unsigned long lapic_cal_j1, lapic_cal_j2;
+
+/*
+ * Temporary interrupt handler.
+ */
+static void __init lapic_cal_handler(struct clock_event_device *dev)
+{
+	unsigned long long tsc = 0;
+	long tapic = apic_read(APIC_TMCCT);
+	unsigned long pm = acpi_pm_read_early();
+
+	if (cpu_has_tsc)
+		rdtscll(tsc);
+
+	switch (lapic_cal_loops++) {
+	case 0:
+		lapic_cal_t1 = tapic;
+		lapic_cal_tsc1 = tsc;
+		lapic_cal_pm1 = pm;
+		lapic_cal_j1 = jiffies;
+		break;
+
+	case LAPIC_CAL_LOOPS:
+		lapic_cal_t2 = tapic;
+		lapic_cal_tsc2 = tsc;
+		if (pm < lapic_cal_pm1)
+			pm += ACPI_PM_OVRRUN;
+		lapic_cal_pm2 = pm;
+		lapic_cal_j2 = jiffies;
+		break;
+	}
+}
+
+static int __init calibrate_by_pmtimer(long deltapm, long *delta)
+{
+	const long pm_100ms = PMTMR_TICKS_PER_SEC / 10;
+	const long pm_thresh = pm_100ms / 100;
+	unsigned long mult;
+	u64 res;
+
+#ifndef CONFIG_X86_PM_TIMER
+	return -1;
+#endif
+
+	apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm);
+
+	/* Check, if the PM timer is available */
+	if (!deltapm)
+		return -1;
+
+	mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, 22);
+
+	if (deltapm > (pm_100ms - pm_thresh) &&
+	    deltapm < (pm_100ms + pm_thresh)) {
+		apic_printk(APIC_VERBOSE, "... PM timer result ok\n");
+	} else {
+		res = (((u64)deltapm) *  mult) >> 22;
+		do_div(res, 1000000);
+		printk(KERN_WARNING "APIC calibration not consistent "
+			"with PM Timer: %ldms instead of 100ms\n",
+			(long)res);
+		/* Correct the lapic counter value */
+		res = (((u64)(*delta)) * pm_100ms);
+		do_div(res, deltapm);
+		printk(KERN_INFO "APIC delta adjusted to PM-Timer: "
+			"%lu (%ld)\n", (unsigned long)res, *delta);
+		*delta = (long)res;
+	}
+
+	return 0;
+}
+
+static int __init calibrate_APIC_clock(void)
+{
+	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
+	void (*real_handler)(struct clock_event_device *dev);
+	unsigned long deltaj;
+	long delta;
+	int pm_referenced = 0;
+
+	local_irq_disable();
+
+	/* Replace the global interrupt handler */
+	real_handler = global_clock_event->event_handler;
+	global_clock_event->event_handler = lapic_cal_handler;
+
+	/*
+	 * Setup the APIC counter to maximum. There is no way the lapic
+	 * can underflow in the 100ms detection time frame
+	 */
+	__setup_APIC_LVTT(0xffffffff, 0, 0);
+
+	/* Let the interrupts run */
+	local_irq_enable();
+
+	while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
+		cpu_relax();
+
+	local_irq_disable();
+
+	/* Restore the real event handler */
+	global_clock_event->event_handler = real_handler;
+
+	/* Build delta t1-t2 as apic timer counts down */
+	delta = lapic_cal_t1 - lapic_cal_t2;
+	apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
+
+	/* we trust the PM based calibration if possible */
+	pm_referenced = !calibrate_by_pmtimer(lapic_cal_pm2 - lapic_cal_pm1,
+					&delta);
+
+	/* Calculate the scaled math multiplication factor */
+	lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS,
+				       lapic_clockevent.shift);
+	lapic_clockevent.max_delta_ns =
+		clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
+	lapic_clockevent.min_delta_ns =
+		clockevent_delta2ns(0xF, &lapic_clockevent);
+
+	calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
+
+	apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
+	apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult);
+	apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
+		    calibration_result);
+
+	if (cpu_has_tsc) {
+		delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
+		apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
+			    "%ld.%04ld MHz.\n",
+			    (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ),
+			    (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ));
+	}
+
+	apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
+		    "%u.%04u MHz.\n",
+		    calibration_result / (1000000 / HZ),
+		    calibration_result % (1000000 / HZ));
+
+	/*
+	 * Do a sanity check on the APIC calibration result
+	 */
+	if (calibration_result < (1000000 / HZ)) {
+		local_irq_enable();
+		printk(KERN_WARNING
+		       "APIC frequency too slow, disabling apic timer\n");
+		return -1;
+	}
+
+	levt->features &= ~CLOCK_EVT_FEAT_DUMMY;
+
+	/*
+	 * PM timer calibration failed or not turned on
+	 * so lets try APIC timer based calibration
+	 */
+	if (!pm_referenced) {
+		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
+
+		/*
+		 * Setup the apic timer manually
+		 */
+		levt->event_handler = lapic_cal_handler;
+		lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt);
+		lapic_cal_loops = -1;
+
+		/* Let the interrupts run */
+		local_irq_enable();
+
+		while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
+			cpu_relax();
+
+		local_irq_disable();
+
+		/* Stop the lapic timer */
+		lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt);
+
+		local_irq_enable();
+
+		/* Jiffies delta */
+		deltaj = lapic_cal_j2 - lapic_cal_j1;
+		apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj);
+
+		/* Check, if the jiffies result is consistent */
+		if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
+			apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
+		else
+			levt->features |= CLOCK_EVT_FEAT_DUMMY;
+	} else
+		local_irq_enable();
+
+	if (levt->features & CLOCK_EVT_FEAT_DUMMY) {
+		printk(KERN_WARNING
+		       "APIC timer disabled due to verification failure.\n");
+			return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Setup the boot APIC
+ *
+ * Calibrate and verify the result.
+ */
+void __init setup_boot_APIC_clock(void)
+{
+	/*
+	 * The local apic timer can be disabled via the kernel
+	 * commandline or from the CPU detection code. Register the lapic
+	 * timer as a dummy clock event source on SMP systems, so the
+	 * broadcast mechanism is used. On UP systems simply ignore it.
+	 */
+	if (disable_apic_timer) {
+		printk(KERN_INFO "Disabling APIC timer\n");
+		/* No broadcast on UP ! */
+		if (num_possible_cpus() > 1) {
+			lapic_clockevent.mult = 1;
+			setup_APIC_timer();
+		}
+		return;
+	}
+
+	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
+		    "calibrating APIC timer ...\n");
+
+	if (calibrate_APIC_clock()) {
+		/* No broadcast on UP ! */
+		if (num_possible_cpus() > 1)
+			setup_APIC_timer();
+		return;
+	}
+
+	/*
+	 * If nmi_watchdog is set to IO_APIC, we need the
+	 * PIT/HPET going.  Otherwise register lapic as a dummy
+	 * device.
+	 */
+	if (nmi_watchdog != NMI_IO_APIC)
+		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+	else
+		printk(KERN_WARNING "APIC timer registered as dummy,"
+			" due to nmi_watchdog=%d!\n", nmi_watchdog);
+
+	/* Setup the lapic or request the broadcast */
+	setup_APIC_timer();
+}
+
+void __cpuinit setup_secondary_APIC_clock(void)
+{
+	setup_APIC_timer();
+}
+
+/*
+ * The guts of the apic timer interrupt
+ */
+static void local_apic_timer_interrupt(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(lapic_events, cpu);
+
+	/*
+	 * Normally we should not be here till LAPIC has been initialized but
+	 * in some cases like kdump, its possible that there is a pending LAPIC
+	 * timer interrupt from previous kernel's context and is delivered in
+	 * new kernel the moment interrupts are enabled.
+	 *
+	 * Interrupts are enabled early and LAPIC is setup much later, hence
+	 * its possible that when we get here evt->event_handler is NULL.
+	 * Check for event_handler being NULL and discard the interrupt as
+	 * spurious.
+	 */
+	if (!evt->event_handler) {
+		printk(KERN_WARNING
+		       "Spurious LAPIC timer interrupt on cpu %d\n", cpu);
+		/* Switch it off */
+		lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt);
+		return;
+	}
+
+	/*
+	 * the NMI deadlock-detector uses this.
+	 */
+#ifdef CONFIG_X86_64
+	add_pda(apic_timer_irqs, 1);
+#else
+	per_cpu(irq_stat, cpu).apic_timer_irqs++;
+#endif
+
+	evt->event_handler(evt);
+}
+
+/*
+ * Local APIC timer interrupt. This is the most natural way for doing
+ * local interrupts, but local timer interrupts can be emulated by
+ * broadcast interrupts too. [in case the hw doesn't support APIC timers]
+ *
+ * [ if a single-CPU system runs an SMP kernel then we call the local
+ *   interrupt as well. Thus we cannot inline the local irq ... ]
+ */
+void smp_apic_timer_interrupt(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	/*
+	 * NOTE! We'd better ACK the irq immediately,
+	 * because timer handling can be slow.
+	 */
+	ack_APIC_irq();
+	/*
+	 * update_process_times() expects us to have done irq_enter().
+	 * Besides, if we don't timer interrupts ignore the global
+	 * interrupt lock, which is the WrongThing (tm) to do.
+	 */
+#ifdef CONFIG_X86_64
+	exit_idle();
+#endif
+	irq_enter();
+	local_apic_timer_interrupt();
+	irq_exit();
+
+	set_irq_regs(old_regs);
+}
+
+int setup_profiling_timer(unsigned int multiplier)
+{
+	return -EINVAL;
+}
+
+/*
+ * Local APIC start and shutdown
+ */
+
+/**
+ * clear_local_APIC - shutdown the local APIC
+ *
+ * This is called, when a CPU is disabled and before rebooting, so the state of
+ * the local APIC has no dangling leftovers. Also used to cleanout any BIOS
+ * leftovers during boot.
+ */
+void clear_local_APIC(void)
+{
+	int maxlvt;
+	u32 v;
+
+	/* APIC hasn't been mapped yet */
+	if (!apic_phys)
+		return;
+
+	maxlvt = lapic_get_maxlvt();
+	/*
+	 * Masking an LVT entry can trigger a local APIC error
+	 * if the vector is zero. Mask LVTERR first to prevent this.
+	 */
+	if (maxlvt >= 3) {
+		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
+		apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
+	}
+	/*
+	 * Careful: we have to set masks only first to deassert
+	 * any level-triggered sources.
+	 */
+	v = apic_read(APIC_LVTT);
+	apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
+	v = apic_read(APIC_LVT0);
+	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
+	v = apic_read(APIC_LVT1);
+	apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
+	if (maxlvt >= 4) {
+		v = apic_read(APIC_LVTPC);
+		apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
+	}
+
+	/* lets not touch this if we didn't frob it */
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
+	if (maxlvt >= 5) {
+		v = apic_read(APIC_LVTTHMR);
+		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+	}
+#endif
+	/*
+	 * Clean APIC state for other OSs:
+	 */
+	apic_write(APIC_LVTT, APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED);
+	apic_write(APIC_LVT1, APIC_LVT_MASKED);
+	if (maxlvt >= 3)
+		apic_write(APIC_LVTERR, APIC_LVT_MASKED);
+	if (maxlvt >= 4)
+		apic_write(APIC_LVTPC, APIC_LVT_MASKED);
+
+	/* Integrated APIC (!82489DX) ? */
+	if (lapic_is_integrated()) {
+		if (maxlvt > 3)
+			/* Clear ESR due to Pentium errata 3AP and 11AP */
+			apic_write(APIC_ESR, 0);
+		apic_read(APIC_ESR);
+	}
+}
+
+/**
+ * disable_local_APIC - clear and disable the local APIC
+ */
+void disable_local_APIC(void)
+{
+	unsigned int value;
+
+	clear_local_APIC();
+
+	/*
+	 * Disable APIC (implies clearing of registers
+	 * for 82489DX!).
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_SPIV_APIC_ENABLED;
+	apic_write(APIC_SPIV, value);
+
+#ifdef CONFIG_X86_32
+	/*
+	 * When LAPIC was disabled by the BIOS and enabled by the kernel,
+	 * restore the disabled state.
+	 */
+	if (enabled_via_apicbase) {
+		unsigned int l, h;
+
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		l &= ~MSR_IA32_APICBASE_ENABLE;
+		wrmsr(MSR_IA32_APICBASE, l, h);
+	}
+#endif
+}
+
+/*
+ * If Linux enabled the LAPIC against the BIOS default disable it down before
+ * re-entering the BIOS on shutdown.  Otherwise the BIOS may get confused and
+ * not power-off.  Additionally clear all LVT entries before disable_local_APIC
+ * for the case where Linux didn't enable the LAPIC.
+ */
+void lapic_shutdown(void)
+{
+	unsigned long flags;
+
+	if (!cpu_has_apic)
+		return;
+
+	local_irq_save(flags);
+
+#ifdef CONFIG_X86_32
+	if (!enabled_via_apicbase)
+		clear_local_APIC();
+	else
+#endif
+		disable_local_APIC();
+
+
+	local_irq_restore(flags);
+}
+
+/*
+ * This is to verify that we're looking at a real local APIC.
+ * Check these against your board if the CPUs aren't getting
+ * started for no apparent reason.
+ */
+int __init verify_local_APIC(void)
+{
+	unsigned int reg0, reg1;
+
+	/*
+	 * The version register is read-only in a real APIC.
+	 */
+	reg0 = apic_read(APIC_LVR);
+	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
+	apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
+	reg1 = apic_read(APIC_LVR);
+	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
+
+	/*
+	 * The two version reads above should print the same
+	 * numbers.  If the second one is different, then we
+	 * poke at a non-APIC.
+	 */
+	if (reg1 != reg0)
+		return 0;
+
+	/*
+	 * Check if the version looks reasonably.
+	 */
+	reg1 = GET_APIC_VERSION(reg0);
+	if (reg1 == 0x00 || reg1 == 0xff)
+		return 0;
+	reg1 = lapic_get_maxlvt();
+	if (reg1 < 0x02 || reg1 == 0xff)
+		return 0;
+
+	/*
+	 * The ID register is read/write in a real APIC.
+	 */
+	reg0 = apic_read(APIC_ID);
+	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
+	apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
+	reg1 = apic_read(APIC_ID);
+	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
+	apic_write(APIC_ID, reg0);
+	if (reg1 != (reg0 ^ APIC_ID_MASK))
+		return 0;
+
+	/*
+	 * The next two are just to see if we have sane values.
+	 * They're only really relevant if we're in Virtual Wire
+	 * compatibility mode, but most boxes are anymore.
+	 */
+	reg0 = apic_read(APIC_LVT0);
+	apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
+	reg1 = apic_read(APIC_LVT1);
+	apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
+
+	return 1;
+}
+
+/**
+ * sync_Arb_IDs - synchronize APIC bus arbitration IDs
+ */
+void __init sync_Arb_IDs(void)
+{
+	/*
+	 * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
+	 * needed on AMD.
+	 */
+	if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+		return;
+
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+
+	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
+	apic_write(APIC_ICR, APIC_DEST_ALLINC |
+			APIC_INT_LEVELTRIG | APIC_DM_INIT);
+}
+
+/*
+ * An initial setup of the virtual wire mode.
+ */
+void __init init_bsp_APIC(void)
+{
+	unsigned int value;
+
+	/*
+	 * Don't do the setup now if we have a SMP BIOS as the
+	 * through-I/O-APIC virtual wire mode might be active.
+	 */
+	if (smp_found_config || !cpu_has_apic)
+		return;
+
+	/*
+	 * Do not trust the local APIC being empty at bootup.
+	 */
+	clear_local_APIC();
+
+	/*
+	 * Enable APIC.
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_VECTOR_MASK;
+	value |= APIC_SPIV_APIC_ENABLED;
+
+#ifdef CONFIG_X86_32
+	/* This bit is reserved on P4/Xeon and should be cleared */
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+	    (boot_cpu_data.x86 == 15))
+		value &= ~APIC_SPIV_FOCUS_DISABLED;
+	else
+#endif
+		value |= APIC_SPIV_FOCUS_DISABLED;
+	value |= SPURIOUS_APIC_VECTOR;
+	apic_write(APIC_SPIV, value);
+
+	/*
+	 * Set up the virtual wire mode.
+	 */
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
+	value = APIC_DM_NMI;
+	if (!lapic_is_integrated())		/* 82489DX */
+		value |= APIC_LVT_LEVEL_TRIGGER;
+	apic_write(APIC_LVT1, value);
+}
+
+static void __cpuinit lapic_setup_esr(void)
+{
+	unsigned int oldvalue, value, maxlvt;
+
+	if (!lapic_is_integrated()) {
+		printk(KERN_INFO "No ESR for 82489DX.\n");
+		return;
+	}
+
+	if (esr_disable) {
+		/*
+		 * Something untraceable is creating bad interrupts on
+		 * secondary quads ... for the moment, just leave the
+		 * ESR disabled - we can't do anything useful with the
+		 * errors anyway - mbligh
+		 */
+		printk(KERN_INFO "Leaving ESR disabled.\n");
+		return;
+	}
+
+	maxlvt = lapic_get_maxlvt();
+	if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
+		apic_write(APIC_ESR, 0);
+	oldvalue = apic_read(APIC_ESR);
+
+	/* enables sending errors */
+	value = ERROR_APIC_VECTOR;
+	apic_write(APIC_LVTERR, value);
+
+	/*
+	 * spec says clear errors after enabling vector.
+	 */
+	if (maxlvt > 3)
+		apic_write(APIC_ESR, 0);
+	value = apic_read(APIC_ESR);
+	if (value != oldvalue)
+		apic_printk(APIC_VERBOSE, "ESR value before enabling "
+			"vector: 0x%08x  after: 0x%08x\n",
+			oldvalue, value);
+}
+
+
+/**
+ * setup_local_APIC - setup the local APIC
+ */
+void __cpuinit setup_local_APIC(void)
+{
+	unsigned int value;
+	int i, j;
+
+#ifdef CONFIG_X86_32
+	/* Pound the ESR really hard over the head with a big hammer - mbligh */
+	if (lapic_is_integrated() && esr_disable) {
+		apic_write(APIC_ESR, 0);
+		apic_write(APIC_ESR, 0);
+		apic_write(APIC_ESR, 0);
+		apic_write(APIC_ESR, 0);
+	}
+#endif
+
+	preempt_disable();
+
+	/*
+	 * Double-check whether this APIC is really registered.
+	 * This is meaningless in clustered apic mode, so we skip it.
+	 */
+	if (!apic_id_registered())
+		BUG();
+
+	/*
+	 * Intel recommends to set DFR, LDR and TPR before enabling
+	 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+	 * document number 292116).  So here it goes...
+	 */
+	init_apic_ldr();
+
+	/*
+	 * Set Task Priority to 'accept all'. We never change this
+	 * later on.
+	 */
+	value = apic_read(APIC_TASKPRI);
+	value &= ~APIC_TPRI_MASK;
+	apic_write(APIC_TASKPRI, value);
+
+	/*
+	 * After a crash, we no longer service the interrupts and a pending
+	 * interrupt from previous kernel might still have ISR bit set.
+	 *
+	 * Most probably by now CPU has serviced that pending interrupt and
+	 * it might not have done the ack_APIC_irq() because it thought,
+	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
+	 * does not clear the ISR bit and cpu thinks it has already serivced
+	 * the interrupt. Hence a vector might get locked. It was noticed
+	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+	 */
+	for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+		value = apic_read(APIC_ISR + i*0x10);
+		for (j = 31; j >= 0; j--) {
+			if (value & (1<<j))
+				ack_APIC_irq();
+		}
+	}
+
+	/*
+	 * Now that we are all set up, enable the APIC
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_VECTOR_MASK;
+	/*
+	 * Enable APIC
+	 */
+	value |= APIC_SPIV_APIC_ENABLED;
+
+#ifdef CONFIG_X86_32
+	/*
+	 * Some unknown Intel IO/APIC (or APIC) errata is biting us with
+	 * certain networking cards. If high frequency interrupts are
+	 * happening on a particular IOAPIC pin, plus the IOAPIC routing
+	 * entry is masked/unmasked at a high rate as well then sooner or
+	 * later IOAPIC line gets 'stuck', no more interrupts are received
+	 * from the device. If focus CPU is disabled then the hang goes
+	 * away, oh well :-(
+	 *
+	 * [ This bug can be reproduced easily with a level-triggered
+	 *   PCI Ne2000 networking cards and PII/PIII processors, dual
+	 *   BX chipset. ]
+	 */
+	/*
+	 * Actually disabling the focus CPU check just makes the hang less
+	 * frequent as it makes the interrupt distributon model be more
+	 * like LRU than MRU (the short-term load is more even across CPUs).
+	 * See also the comment in end_level_ioapic_irq().  --macro
+	 */
+
+	/*
+	 * - enable focus processor (bit==0)
+	 * - 64bit mode always use processor focus
+	 *   so no need to set it
+	 */
+	value &= ~APIC_SPIV_FOCUS_DISABLED;
+#endif
+
+	/*
+	 * Set spurious IRQ vector
+	 */
+	value |= SPURIOUS_APIC_VECTOR;
+	apic_write(APIC_SPIV, value);
+
+	/*
+	 * Set up LVT0, LVT1:
+	 *
+	 * set up through-local-APIC on the BP's LINT0. This is not
+	 * strictly necessary in pure symmetric-IO mode, but sometimes
+	 * we delegate interrupts to the 8259A.
+	 */
+	/*
+	 * TODO: set up through-local-APIC from through-I/O-APIC? --macro
+	 */
+	value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
+	if (!smp_processor_id() && (pic_mode || !value)) {
+		value = APIC_DM_EXTINT;
+		apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
+				smp_processor_id());
+	} else {
+		value = APIC_DM_EXTINT | APIC_LVT_MASKED;
+		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
+				smp_processor_id());
+	}
+	apic_write(APIC_LVT0, value);
+
+	/*
+	 * only the BP should see the LINT1 NMI signal, obviously.
+	 */
+	if (!smp_processor_id())
+		value = APIC_DM_NMI;
+	else
+		value = APIC_DM_NMI | APIC_LVT_MASKED;
+	if (!lapic_is_integrated())		/* 82489DX */
+		value |= APIC_LVT_LEVEL_TRIGGER;
+	apic_write(APIC_LVT1, value);
+
+	preempt_enable();
+}
+
+void __cpuinit end_local_APIC_setup(void)
+{
+	lapic_setup_esr();
+
+#ifdef CONFIG_X86_32
+	{
+		unsigned int value;
+		/* Disable the local apic timer */
+		value = apic_read(APIC_LVTT);
+		value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+		apic_write(APIC_LVTT, value);
+	}
+#endif
+
+	setup_apic_nmi_watchdog(NULL);
+	apic_pm_activate();
+}
+
+#ifdef HAVE_X2APIC
+void check_x2apic(void)
+{
+	int msr, msr2;
+
+	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+
+	if (msr & X2APIC_ENABLE) {
+		printk("x2apic enabled by BIOS, switching to x2apic ops\n");
+		x2apic_preenabled = x2apic = 1;
+		apic_ops = &x2apic_ops;
+	}
+}
+
+void enable_x2apic(void)
+{
+	int msr, msr2;
+
+	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+	if (!(msr & X2APIC_ENABLE)) {
+		printk("Enabling x2apic\n");
+		wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
+	}
+}
+
+void enable_IR_x2apic(void)
+{
+#ifdef CONFIG_INTR_REMAP
+	int ret;
+	unsigned long flags;
+
+	if (!cpu_has_x2apic)
+		return;
+
+	if (!x2apic_preenabled && disable_x2apic) {
+		printk(KERN_INFO
+		       "Skipped enabling x2apic and Interrupt-remapping "
+		       "because of nox2apic\n");
+		return;
+	}
+
+	if (x2apic_preenabled && disable_x2apic)
+		panic("Bios already enabled x2apic, can't enforce nox2apic");
+
+	if (!x2apic_preenabled && skip_ioapic_setup) {
+		printk(KERN_INFO
+		       "Skipped enabling x2apic and Interrupt-remapping "
+		       "because of skipping io-apic setup\n");
+		return;
+	}
+
+	ret = dmar_table_init();
+	if (ret) {
+		printk(KERN_INFO
+		       "dmar_table_init() failed with %d:\n", ret);
+
+		if (x2apic_preenabled)
+			panic("x2apic enabled by bios. But IR enabling failed");
+		else
+			printk(KERN_INFO
+			       "Not enabling x2apic,Intr-remapping\n");
+		return;
+	}
+
+	local_irq_save(flags);
+	mask_8259A();
+
+	ret = save_mask_IO_APIC_setup();
+	if (ret) {
+		printk(KERN_INFO "Saving IO-APIC state failed: %d\n", ret);
+		goto end;
+	}
+
+	ret = enable_intr_remapping(1);
+
+	if (ret && x2apic_preenabled) {
+		local_irq_restore(flags);
+		panic("x2apic enabled by bios. But IR enabling failed");
+	}
+
+	if (ret)
+		goto end_restore;
+
+	if (!x2apic) {
+		x2apic = 1;
+		apic_ops = &x2apic_ops;
+		enable_x2apic();
+	}
+
+end_restore:
+	if (ret)
+		/*
+		 * IR enabling failed
+		 */
+		restore_IO_APIC_setup();
+	else
+		reinit_intr_remapped_IO_APIC(x2apic_preenabled);
+
+end:
+	unmask_8259A();
+	local_irq_restore(flags);
+
+	if (!ret) {
+		if (!x2apic_preenabled)
+			printk(KERN_INFO
+			       "Enabled x2apic and interrupt-remapping\n");
+		else
+			printk(KERN_INFO
+			       "Enabled Interrupt-remapping\n");
+	} else
+		printk(KERN_ERR
+		       "Failed to enable Interrupt-remapping and x2apic\n");
+#else
+	if (!cpu_has_x2apic)
+		return;
+
+	if (x2apic_preenabled)
+		panic("x2apic enabled prior OS handover,"
+		      " enable CONFIG_INTR_REMAP");
+
+	printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping "
+	       " and x2apic\n");
+#endif
+
+	return;
+}
+#endif /* HAVE_X2APIC */
+
+#ifdef CONFIG_X86_64
+/*
+ * Detect and enable local APICs on non-SMP boards.
+ * Original code written by Keir Fraser.
+ * On AMD64 we trust the BIOS - if it says no APIC it is likely
+ * not correctly set up (usually the APIC timer won't work etc.)
+ */
+static int __init detect_init_APIC(void)
+{
+	if (!cpu_has_apic) {
+		printk(KERN_INFO "No local APIC present\n");
+		return -1;
+	}
+
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+	boot_cpu_physical_apicid = 0;
+	return 0;
+}
+#else
+/*
+ * Detect and initialize APIC
+ */
+static int __init detect_init_APIC(void)
+{
+	u32 h, l, features;
+
+	/* Disabled by kernel option? */
+	if (disable_apic)
+		return -1;
+
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_AMD:
+		if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
+		    (boot_cpu_data.x86 == 15))
+			break;
+		goto no_apic;
+	case X86_VENDOR_INTEL:
+		if (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15 ||
+		    (boot_cpu_data.x86 == 5 && cpu_has_apic))
+			break;
+		goto no_apic;
+	default:
+		goto no_apic;
+	}
+
+	if (!cpu_has_apic) {
+		/*
+		 * Over-ride BIOS and try to enable the local APIC only if
+		 * "lapic" specified.
+		 */
+		if (!force_enable_local_apic) {
+			printk(KERN_INFO "Local APIC disabled by BIOS -- "
+			       "you can enable it with \"lapic\"\n");
+			return -1;
+		}
+		/*
+		 * Some BIOSes disable the local APIC in the APIC_BASE
+		 * MSR. This can only be done in software for Intel P6 or later
+		 * and AMD K7 (Model > 1) or later.
+		 */
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+			printk(KERN_INFO
+			       "Local APIC disabled by BIOS -- reenabling.\n");
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+			enabled_via_apicbase = 1;
+		}
+	}
+	/*
+	 * The APIC feature bit should now be enabled
+	 * in `cpuid'
+	 */
+	features = cpuid_edx(1);
+	if (!(features & (1 << X86_FEATURE_APIC))) {
+		printk(KERN_WARNING "Could not enable APIC!\n");
+		return -1;
+	}
+	set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	/* The BIOS may have set up the APIC at some other address */
+	rdmsr(MSR_IA32_APICBASE, l, h);
+	if (l & MSR_IA32_APICBASE_ENABLE)
+		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+
+	printk(KERN_INFO "Found and enabled local APIC!\n");
+
+	apic_pm_activate();
+
+	return 0;
+
+no_apic:
+	printk(KERN_INFO "No local APIC present or hardware disabled\n");
+	return -1;
+}
+#endif
+
+#ifdef CONFIG_X86_64
+void __init early_init_lapic_mapping(void)
+{
+	unsigned long phys_addr;
+
+	/*
+	 * If no local APIC can be found then go out
+	 * : it means there is no mpatable and MADT
+	 */
+	if (!smp_found_config)
+		return;
+
+	phys_addr = mp_lapic_addr;
+
+	set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
+	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
+		    APIC_BASE, phys_addr);
+
+	/*
+	 * Fetch the APIC ID of the BSP in case we have a
+	 * default configuration (or the MP table is broken).
+	 */
+	boot_cpu_physical_apicid = read_apic_id();
+}
+#endif
+
+/**
+ * init_apic_mappings - initialize APIC mappings
+ */
+void __init init_apic_mappings(void)
+{
+#ifdef HAVE_X2APIC
+	if (x2apic) {
+		boot_cpu_physical_apicid = read_apic_id();
+		return;
+	}
+#endif
+
+	/*
+	 * If no local APIC can be found then set up a fake all
+	 * zeroes page to simulate the local APIC and another
+	 * one for the IO-APIC.
+	 */
+	if (!smp_found_config && detect_init_APIC()) {
+		apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
+		apic_phys = __pa(apic_phys);
+	} else
+		apic_phys = mp_lapic_addr;
+
+	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+	apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
+				APIC_BASE, apic_phys);
+
+	/*
+	 * Fetch the APIC ID of the BSP in case we have a
+	 * default configuration (or the MP table is broken).
+	 */
+	if (boot_cpu_physical_apicid == -1U)
+		boot_cpu_physical_apicid = read_apic_id();
+}
+
+/*
+ * This initializes the IO-APIC and APIC hardware if this is
+ * a UP kernel.
+ */
+int apic_version[MAX_APICS];
+
+int __init APIC_init_uniprocessor(void)
+{
+#ifdef CONFIG_X86_64
+	if (disable_apic) {
+		printk(KERN_INFO "Apic disabled\n");
+		return -1;
+	}
+	if (!cpu_has_apic) {
+		disable_apic = 1;
+		printk(KERN_INFO "Apic disabled by BIOS\n");
+		return -1;
+	}
+#else
+	if (!smp_found_config && !cpu_has_apic)
+		return -1;
+
+	/*
+	 * Complain if the BIOS pretends there is one.
+	 */
+	if (!cpu_has_apic &&
+	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+		printk(KERN_ERR "BIOS bug, local APIC 0x%x not detected!...\n",
+		       boot_cpu_physical_apicid);
+		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+		return -1;
+	}
+#endif
+
+#ifdef HAVE_X2APIC
+	enable_IR_x2apic();
+#endif
+#ifdef CONFIG_X86_64
+	setup_apic_routing();
+#endif
+
+	verify_local_APIC();
+	connect_bsp_APIC();
+
+#ifdef CONFIG_X86_64
+	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
+#else
+	/*
+	 * Hack: In case of kdump, after a crash, kernel might be booting
+	 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+	 * might be zero if read from MP tables. Get it from LAPIC.
+	 */
+# ifdef CONFIG_CRASH_DUMP
+	boot_cpu_physical_apicid = read_apic_id();
+# endif
+#endif
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
+	setup_local_APIC();
+
+#ifdef CONFIG_X86_64
+	/*
+	 * Now enable IO-APICs, actually call clear_IO_APIC
+	 * We need clear_IO_APIC before enabling vector on BP
+	 */
+	if (!skip_ioapic_setup && nr_ioapics)
+		enable_IO_APIC();
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+	if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
+#endif
+		localise_nmi_watchdog();
+	end_local_APIC_setup();
+
+#ifdef CONFIG_X86_IO_APIC
+	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
+		setup_IO_APIC();
+# ifdef CONFIG_X86_64
+	else
+		nr_ioapics = 0;
+# endif
+#endif
+
+#ifdef CONFIG_X86_64
+	setup_boot_APIC_clock();
+	check_nmi_watchdog();
+#else
+	setup_boot_clock();
+#endif
+
+	return 0;
+}
+
+/*
+ * Local APIC interrupts
+ */
+
+/*
+ * This interrupt should _never_ happen with our APIC/SMP architecture
+ */
+void smp_spurious_interrupt(struct pt_regs *regs)
+{
+	u32 v;
+
+#ifdef CONFIG_X86_64
+	exit_idle();
+#endif
+	irq_enter();
+	/*
+	 * Check if this really is a spurious interrupt and ACK it
+	 * if it is a vectored one.  Just in case...
+	 * Spurious interrupts should not be ACKed.
+	 */
+	v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
+	if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
+		ack_APIC_irq();
+
+#ifdef CONFIG_X86_64
+	add_pda(irq_spurious_count, 1);
+#else
+	/* see sw-dev-man vol 3, chapter 7.4.13.5 */
+	printk(KERN_INFO "spurious APIC interrupt on CPU#%d, "
+	       "should never happen.\n", smp_processor_id());
+	__get_cpu_var(irq_stat).irq_spurious_count++;
+#endif
+	irq_exit();
+}
+
+/*
+ * This interrupt should never happen with our APIC/SMP architecture
+ */
+void smp_error_interrupt(struct pt_regs *regs)
+{
+	u32 v, v1;
+
+#ifdef CONFIG_X86_64
+	exit_idle();
+#endif
+	irq_enter();
+	/* First tickle the hardware, only then report what went on. -- REW */
+	v = apic_read(APIC_ESR);
+	apic_write(APIC_ESR, 0);
+	v1 = apic_read(APIC_ESR);
+	ack_APIC_irq();
+	atomic_inc(&irq_err_count);
+
+	/* Here is what the APIC error bits mean:
+	   0: Send CS error
+	   1: Receive CS error
+	   2: Send accept error
+	   3: Receive accept error
+	   4: Reserved
+	   5: Send illegal vector
+	   6: Received illegal vector
+	   7: Illegal register address
+	*/
+	printk(KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n",
+		smp_processor_id(), v , v1);
+	irq_exit();
+}
+
+/**
+ * connect_bsp_APIC - attach the APIC to the interrupt system
+ */
+void __init connect_bsp_APIC(void)
+{
+#ifdef CONFIG_X86_32
+	if (pic_mode) {
+		/*
+		 * Do not trust the local APIC being empty at bootup.
+		 */
+		clear_local_APIC();
+		/*
+		 * PIC mode, enable APIC mode in the IMCR, i.e.  connect BSP's
+		 * local APIC to INT and NMI lines.
+		 */
+		apic_printk(APIC_VERBOSE, "leaving PIC mode, "
+				"enabling APIC mode.\n");
+		outb(0x70, 0x22);
+		outb(0x01, 0x23);
+	}
+#endif
+	enable_apic_mode();
+}
+
+/**
+ * disconnect_bsp_APIC - detach the APIC from the interrupt system
+ * @virt_wire_setup:	indicates, whether virtual wire mode is selected
+ *
+ * Virtual wire mode is necessary to deliver legacy interrupts even when the
+ * APIC is disabled.
+ */
+void disconnect_bsp_APIC(int virt_wire_setup)
+{
+	unsigned int value;
+
+#ifdef CONFIG_X86_32
+	if (pic_mode) {
+		/*
+		 * Put the board back into PIC mode (has an effect only on
+		 * certain older boards).  Note that APIC interrupts, including
+		 * IPIs, won't work beyond this point!  The only exception are
+		 * INIT IPIs.
+		 */
+		apic_printk(APIC_VERBOSE, "disabling APIC mode, "
+				"entering PIC mode.\n");
+		outb(0x70, 0x22);
+		outb(0x00, 0x23);
+		return;
+	}
+#endif
+
+	/* Go back to Virtual Wire compatibility mode */
+
+	/* For the spurious interrupt use vector F, and enable it */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_VECTOR_MASK;
+	value |= APIC_SPIV_APIC_ENABLED;
+	value |= 0xf;
+	apic_write(APIC_SPIV, value);
+
+	if (!virt_wire_setup) {
+		/*
+		 * For LVT0 make it edge triggered, active high,
+		 * external and enabled
+		 */
+		value = apic_read(APIC_LVT0);
+		value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+		apic_write(APIC_LVT0, value);
+	} else {
+		/* Disable LVT0 */
+		apic_write(APIC_LVT0, APIC_LVT_MASKED);
+	}
+
+	/*
+	 * For LVT1 make it edge triggered, active high,
+	 * nmi and enabled
+	 */
+	value = apic_read(APIC_LVT1);
+	value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+	value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+	value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+	apic_write(APIC_LVT1, value);
+}
+
+void __cpuinit generic_processor_info(int apicid, int version)
+{
+	int cpu;
+	cpumask_t tmp_map;
+
+	/*
+	 * Validate version
+	 */
+	if (version == 0x0) {
+		printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
+				"fixing up to 0x10. (tell your hw vendor)\n",
+				version);
+		version = 0x10;
+	}
+	apic_version[apicid] = version;
+
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+			"  Processor ignored.\n", NR_CPUS);
+		return;
+	}
+
+	num_processors++;
+	cpus_complement(tmp_map, cpu_present_map);
+	cpu = first_cpu(tmp_map);
+
+	physid_set(apicid, phys_cpu_present_map);
+	if (apicid == boot_cpu_physical_apicid) {
+		/*
+		 * x86_bios_cpu_apicid is required to have processors listed
+		 * in same order as logical cpu numbers. Hence the first
+		 * entry is BSP, and so on.
+		 */
+		cpu = 0;
+	}
+	if (apicid > max_physical_apicid)
+		max_physical_apicid = apicid;
+
+#ifdef CONFIG_X86_32
+	/*
+	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+	 * but we need to work other dependencies like SMP_SUSPEND etc
+	 * before this can be done without some confusion.
+	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+	 *       - Ashok Raj <ashok.raj@intel.com>
+	 */
+	if (max_physical_apicid >= 8) {
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (!APIC_XAPIC(version)) {
+				def_to_bigsmp = 0;
+				break;
+			}
+			/* If P4 and above fall through */
+		case X86_VENDOR_AMD:
+			def_to_bigsmp = 1;
+		}
+	}
+#endif
+
+#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
+	/* are we being called early in kernel startup? */
+	if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
+		u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
+		u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
+
+		cpu_to_apicid[cpu] = apicid;
+		bios_cpu_apicid[cpu] = apicid;
+	} else {
+		per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+		per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
+	}
+#endif
+
+	cpu_set(cpu, cpu_possible_map);
+	cpu_set(cpu, cpu_present_map);
+}
+
+#ifdef CONFIG_X86_64
+int hard_smp_processor_id(void)
+{
+	return read_apic_id();
+}
+#endif
+
+/*
+ * Power management
+ */
+#ifdef CONFIG_PM
+
+static struct {
+	/*
+	 * 'active' is true if the local APIC was enabled by us and
+	 * not the BIOS; this signifies that we are also responsible
+	 * for disabling it before entering apm/acpi suspend
+	 */
+	int active;
+	/* r/w apic fields */
+	unsigned int apic_id;
+	unsigned int apic_taskpri;
+	unsigned int apic_ldr;
+	unsigned int apic_dfr;
+	unsigned int apic_spiv;
+	unsigned int apic_lvtt;
+	unsigned int apic_lvtpc;
+	unsigned int apic_lvt0;
+	unsigned int apic_lvt1;
+	unsigned int apic_lvterr;
+	unsigned int apic_tmict;
+	unsigned int apic_tdcr;
+	unsigned int apic_thmr;
+} apic_pm_state;
+
+static int lapic_suspend(struct sys_device *dev, pm_message_t state)
+{
+	unsigned long flags;
+	int maxlvt;
+
+	if (!apic_pm_state.active)
+		return 0;
+
+	maxlvt = lapic_get_maxlvt();
+
+	apic_pm_state.apic_id = apic_read(APIC_ID);
+	apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
+	apic_pm_state.apic_ldr = apic_read(APIC_LDR);
+	apic_pm_state.apic_dfr = apic_read(APIC_DFR);
+	apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
+	apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
+	if (maxlvt >= 4)
+		apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
+	apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
+	apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
+	apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
+	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
+	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
+	if (maxlvt >= 5)
+		apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
+#endif
+
+	local_irq_save(flags);
+	disable_local_APIC();
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int lapic_resume(struct sys_device *dev)
+{
+	unsigned int l, h;
+	unsigned long flags;
+	int maxlvt;
+
+	if (!apic_pm_state.active)
+		return 0;
+
+	maxlvt = lapic_get_maxlvt();
+
+	local_irq_save(flags);
+
+#ifdef HAVE_X2APIC
+	if (x2apic)
+		enable_x2apic();
+	else
+#endif
+	{
+		/*
+		 * Make sure the APICBASE points to the right address
+		 *
+		 * FIXME! This will be wrong if we ever support suspend on
+		 * SMP! We'll need to do this as part of the CPU restore!
+		 */
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		l &= ~MSR_IA32_APICBASE_BASE;
+		l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+		wrmsr(MSR_IA32_APICBASE, l, h);
+	}
+
+	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
+	apic_write(APIC_ID, apic_pm_state.apic_id);
+	apic_write(APIC_DFR, apic_pm_state.apic_dfr);
+	apic_write(APIC_LDR, apic_pm_state.apic_ldr);
+	apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
+	apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
+	apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
+	apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
+	if (maxlvt >= 5)
+		apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
+#endif
+	if (maxlvt >= 4)
+		apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
+	apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
+	apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
+	apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
+	apic_write(APIC_ESR, 0);
+	apic_read(APIC_ESR);
+	apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
+	apic_write(APIC_ESR, 0);
+	apic_read(APIC_ESR);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+/*
+ * This device has no shutdown method - fully functioning local APICs
+ * are needed on every CPU up until machine_halt/restart/poweroff.
+ */
+
+static struct sysdev_class lapic_sysclass = {
+	.name		= "lapic",
+	.resume		= lapic_resume,
+	.suspend	= lapic_suspend,
+};
+
+static struct sys_device device_lapic = {
+	.id	= 0,
+	.cls	= &lapic_sysclass,
+};
+
+static void __cpuinit apic_pm_activate(void)
+{
+	apic_pm_state.active = 1;
+}
+
+static int __init init_lapic_sysfs(void)
+{
+	int error;
+
+	if (!cpu_has_apic)
+		return 0;
+	/* XXX: remove suspend/resume procs if !apic_pm_state.active? */
+
+	error = sysdev_class_register(&lapic_sysclass);
+	if (!error)
+		error = sysdev_register(&device_lapic);
+	return error;
+}
+device_initcall(init_lapic_sysfs);
+
+#else	/* CONFIG_PM */
+
+static void apic_pm_activate(void) { }
+
+#endif	/* CONFIG_PM */
+
+#ifdef CONFIG_X86_64
+/*
+ * apic_is_clustered_box() -- Check if we can expect good TSC
+ *
+ * Thus far, the major user of this is IBM's Summit2 series:
+ *
+ * Clustered boxes may have unsynced TSC problems if they are
+ * multi-chassis. Use available data to take a good guess.
+ * If in doubt, go HPET.
+ */
+__cpuinit int apic_is_clustered_box(void)
+{
+	int i, clusters, zeros;
+	unsigned id;
+	u16 *bios_cpu_apicid;
+	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
+
+	/*
+	 * there is not this kind of box with AMD CPU yet.
+	 * Some AMD box with quadcore cpu and 8 sockets apicid
+	 * will be [4, 0x23] or [8, 0x27] could be thought to
+	 * vsmp box still need checking...
+	 */
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
+		return 0;
+
+	bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
+	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
+
+	for (i = 0; i < NR_CPUS; i++) {
+		/* are we being called early in kernel startup? */
+		if (bios_cpu_apicid) {
+			id = bios_cpu_apicid[i];
+		}
+		else if (i < nr_cpu_ids) {
+			if (cpu_present(i))
+				id = per_cpu(x86_bios_cpu_apicid, i);
+			else
+				continue;
+		}
+		else
+			break;
+
+		if (id != BAD_APICID)
+			__set_bit(APIC_CLUSTERID(id), clustermap);
+	}
+
+	/* Problem:  Partially populated chassis may not have CPUs in some of
+	 * the APIC clusters they have been allocated.  Only present CPUs have
+	 * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap.
+	 * Since clusters are allocated sequentially, count zeros only if
+	 * they are bounded by ones.
+	 */
+	clusters = 0;
+	zeros = 0;
+	for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
+		if (test_bit(i, clustermap)) {
+			clusters += 1 + zeros;
+			zeros = 0;
+		} else
+			++zeros;
+	}
+
+	/* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
+	 * not guaranteed to be synced between boards
+	 */
+	if (is_vsmp_box() && clusters > 1)
+		return 1;
+
+	/*
+	 * If clusters > 2, then should be multi-chassis.
+	 * May have to revisit this when multi-core + hyperthreaded CPUs come
+	 * out, but AFAIK this will work even for them.
+	 */
+	return (clusters > 2);
+}
+#endif
+
+/*
+ * APIC command line parameters
+ */
+static int __init setup_disableapic(char *arg)
+{
+	disable_apic = 1;
+	setup_clear_cpu_cap(X86_FEATURE_APIC);
+	return 0;
+}
+early_param("disableapic", setup_disableapic);
+
+/* same as disableapic, for compatibility */
+static int __init setup_nolapic(char *arg)
+{
+	return setup_disableapic(arg);
+}
+early_param("nolapic", setup_nolapic);
+
+static int __init parse_lapic_timer_c2_ok(char *arg)
+{
+	local_apic_timer_c2_ok = 1;
+	return 0;
+}
+early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
+
+static int __init parse_disable_apic_timer(char *arg)
+{
+	disable_apic_timer = 1;
+	return 0;
+}
+early_param("noapictimer", parse_disable_apic_timer);
+
+static int __init parse_nolapic_timer(char *arg)
+{
+	disable_apic_timer = 1;
+	return 0;
+}
+early_param("nolapic_timer", parse_nolapic_timer);
+
+static int __init apic_set_verbosity(char *arg)
+{
+	if (!arg)  {
+#ifdef CONFIG_X86_64
+		skip_ioapic_setup = 0;
+		return 0;
+#endif
+		return -EINVAL;
+	}
+
+	if (strcmp("debug", arg) == 0)
+		apic_verbosity = APIC_DEBUG;
+	else if (strcmp("verbose", arg) == 0)
+		apic_verbosity = APIC_VERBOSE;
+	else {
+		printk(KERN_WARNING "APIC Verbosity level %s not recognised"
+			" use apic=verbose or apic=debug\n", arg);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+early_param("apic", apic_set_verbosity);
+
+static int __init lapic_insert_resource(void)
+{
+	if (!apic_phys)
+		return -1;
+
+	/* Put local APIC into the resource map. */
+	lapic_resource.start = apic_phys;
+	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+	insert_resource(&iomem_resource, &lapic_resource);
+
+	return 0;
+}
+
+/*
+ * need call insert after e820_reserve_resources()
+ * that is using request_resource
+ */
+late_initcall(lapic_insert_resource);
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
deleted file mode 100644
index f88bd0d..0000000
--- a/arch/x86/kernel/apic_32.c
+++ /dev/null
@@ -1,1746 +0,0 @@
-/*
- *	Local APIC handling, local APIC timers
- *
- *	(c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
- *					thanks to Eric Gilmore
- *					and Rolf G. Tews
- *					for testing these extensively.
- *	Maciej W. Rozycki	:	Various updates and fixes.
- *	Mikael Pettersson	:	Power Management for UP-APIC.
- *	Pavel Machek and
- *	Mikael Pettersson	:	PM converted to driver model.
- */
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/cpu.h>
-#include <linux/clockchips.h>
-#include <linux/acpi_pmtmr.h>
-#include <linux/module.h>
-#include <linux/dmi.h>
-
-#include <asm/atomic.h>
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/desc.h>
-#include <asm/arch_hooks.h>
-#include <asm/hpet.h>
-#include <asm/i8253.h>
-#include <asm/nmi.h>
-
-#include <mach_apic.h>
-#include <mach_apicdef.h>
-#include <mach_ipi.h>
-
-/*
- * Sanity check
- */
-#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
-# error SPURIOUS_APIC_VECTOR definition error
-#endif
-
-unsigned long mp_lapic_addr;
-
-/*
- * Knob to control our willingness to enable the local APIC.
- *
- * +1=force-enable
- */
-static int force_enable_local_apic;
-int disable_apic;
-
-/* Local APIC timer verification ok */
-static int local_apic_timer_verify_ok;
-/* Disable local APIC timer from the kernel commandline or via dmi quirk */
-static int local_apic_timer_disabled;
-/* Local APIC timer works in C2 */
-int local_apic_timer_c2_ok;
-EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
-
-int first_system_vector = 0xfe;
-
-char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
-
-/*
- * Debug level, exported for io_apic.c
- */
-unsigned int apic_verbosity;
-
-int pic_mode;
-
-/* Have we found an MP table */
-int smp_found_config;
-
-static struct resource lapic_resource = {
-	.name = "Local APIC",
-	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
-};
-
-static unsigned int calibration_result;
-
-static int lapic_next_event(unsigned long delta,
-			    struct clock_event_device *evt);
-static void lapic_timer_setup(enum clock_event_mode mode,
-			      struct clock_event_device *evt);
-static void lapic_timer_broadcast(cpumask_t mask);
-static void apic_pm_activate(void);
-
-/*
- * The local apic timer can be used for any function which is CPU local.
- */
-static struct clock_event_device lapic_clockevent = {
-	.name		= "lapic",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
-			| CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
-	.shift		= 32,
-	.set_mode	= lapic_timer_setup,
-	.set_next_event	= lapic_next_event,
-	.broadcast	= lapic_timer_broadcast,
-	.rating		= 100,
-	.irq		= -1,
-};
-static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
-
-/* Local APIC was disabled by the BIOS and enabled by the kernel */
-static int enabled_via_apicbase;
-
-static unsigned long apic_phys;
-
-/*
- * Get the LAPIC version
- */
-static inline int lapic_get_version(void)
-{
-	return GET_APIC_VERSION(apic_read(APIC_LVR));
-}
-
-/*
- * Check, if the APIC is integrated or a separate chip
- */
-static inline int lapic_is_integrated(void)
-{
-	return APIC_INTEGRATED(lapic_get_version());
-}
-
-/*
- * Check, whether this is a modern or a first generation APIC
- */
-static int modern_apic(void)
-{
-	/* AMD systems use old APIC versions, so check the CPU */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-	    boot_cpu_data.x86 >= 0xf)
-		return 1;
-	return lapic_get_version() >= 0x14;
-}
-
-void apic_wait_icr_idle(void)
-{
-	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
-		cpu_relax();
-}
-
-u32 safe_apic_wait_icr_idle(void)
-{
-	u32 send_status;
-	int timeout;
-
-	timeout = 0;
-	do {
-		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
-		if (!send_status)
-			break;
-		udelay(100);
-	} while (timeout++ < 1000);
-
-	return send_status;
-}
-
-/**
- * enable_NMI_through_LVT0 - enable NMI through local vector table 0
- */
-void __cpuinit enable_NMI_through_LVT0(void)
-{
-	unsigned int v = APIC_DM_NMI;
-
-	/* Level triggered for 82489DX */
-	if (!lapic_is_integrated())
-		v |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write(APIC_LVT0, v);
-}
-
-/**
- * get_physical_broadcast - Get number of physical broadcast IDs
- */
-int get_physical_broadcast(void)
-{
-	return modern_apic() ? 0xff : 0xf;
-}
-
-/**
- * lapic_get_maxlvt - get the maximum number of local vector table entries
- */
-int lapic_get_maxlvt(void)
-{
-	unsigned int v = apic_read(APIC_LVR);
-
-	/* 82489DXs do not report # of LVT entries. */
-	return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
-}
-
-/*
- * Local APIC timer
- */
-
-/* Clock divisor is set to 16 */
-#define APIC_DIVISOR 16
-
-/*
- * This function sets up the local APIC timer, with a timeout of
- * 'clocks' APIC bus clock. During calibration we actually call
- * this function twice on the boot CPU, once with a bogus timeout
- * value, second time for real. The other (noncalibrating) CPUs
- * call this function only once, with the real, calibrated value.
- */
-static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
-{
-	unsigned int lvtt_value, tmp_value;
-
-	lvtt_value = LOCAL_TIMER_VECTOR;
-	if (!oneshot)
-		lvtt_value |= APIC_LVT_TIMER_PERIODIC;
-	if (!lapic_is_integrated())
-		lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
-
-	if (!irqen)
-		lvtt_value |= APIC_LVT_MASKED;
-
-	apic_write(APIC_LVTT, lvtt_value);
-
-	/*
-	 * Divide PICLK by 16
-	 */
-	tmp_value = apic_read(APIC_TDCR);
-	apic_write(APIC_TDCR,
-		   (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
-		   APIC_TDR_DIV_16);
-
-	if (!oneshot)
-		apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
-}
-
-/*
- * Program the next event, relative to now
- */
-static int lapic_next_event(unsigned long delta,
-			    struct clock_event_device *evt)
-{
-	apic_write(APIC_TMICT, delta);
-	return 0;
-}
-
-/*
- * Setup the lapic timer in periodic or oneshot mode
- */
-static void lapic_timer_setup(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
-{
-	unsigned long flags;
-	unsigned int v;
-
-	/* Lapic used for broadcast ? */
-	if (!local_apic_timer_verify_ok)
-		return;
-
-	local_irq_save(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-	case CLOCK_EVT_MODE_ONESHOT:
-		__setup_APIC_LVTT(calibration_result,
-				  mode != CLOCK_EVT_MODE_PERIODIC, 1);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		v = apic_read(APIC_LVTT);
-		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-		apic_write(APIC_LVTT, v);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		/* Nothing to do here */
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-/*
- * Local APIC timer broadcast function
- */
-static void lapic_timer_broadcast(cpumask_t mask)
-{
-#ifdef CONFIG_SMP
-	send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
-#endif
-}
-
-/*
- * Setup the local APIC timer for this CPU. Copy the initilized values
- * of the boot CPU and register the clock event in the framework.
- */
-static void __devinit setup_APIC_timer(void)
-{
-	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
-
-	memcpy(levt, &lapic_clockevent, sizeof(*levt));
-	levt->cpumask = cpumask_of_cpu(smp_processor_id());
-
-	clockevents_register_device(levt);
-}
-
-/*
- * In this functions we calibrate APIC bus clocks to the external timer.
- *
- * We want to do the calibration only once since we want to have local timer
- * irqs syncron. CPUs connected by the same APIC bus have the very same bus
- * frequency.
- *
- * This was previously done by reading the PIT/HPET and waiting for a wrap
- * around to find out, that a tick has elapsed. I have a box, where the PIT
- * readout is broken, so it never gets out of the wait loop again. This was
- * also reported by others.
- *
- * Monitoring the jiffies value is inaccurate and the clockevents
- * infrastructure allows us to do a simple substitution of the interrupt
- * handler.
- *
- * The calibration routine also uses the pm_timer when possible, as the PIT
- * happens to run way too slow (factor 2.3 on my VAIO CoreDuo, which goes
- * back to normal later in the boot process).
- */
-
-#define LAPIC_CAL_LOOPS		(HZ/10)
-
-static __initdata int lapic_cal_loops = -1;
-static __initdata long lapic_cal_t1, lapic_cal_t2;
-static __initdata unsigned long long lapic_cal_tsc1, lapic_cal_tsc2;
-static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2;
-static __initdata unsigned long lapic_cal_j1, lapic_cal_j2;
-
-/*
- * Temporary interrupt handler.
- */
-static void __init lapic_cal_handler(struct clock_event_device *dev)
-{
-	unsigned long long tsc = 0;
-	long tapic = apic_read(APIC_TMCCT);
-	unsigned long pm = acpi_pm_read_early();
-
-	if (cpu_has_tsc)
-		rdtscll(tsc);
-
-	switch (lapic_cal_loops++) {
-	case 0:
-		lapic_cal_t1 = tapic;
-		lapic_cal_tsc1 = tsc;
-		lapic_cal_pm1 = pm;
-		lapic_cal_j1 = jiffies;
-		break;
-
-	case LAPIC_CAL_LOOPS:
-		lapic_cal_t2 = tapic;
-		lapic_cal_tsc2 = tsc;
-		if (pm < lapic_cal_pm1)
-			pm += ACPI_PM_OVRRUN;
-		lapic_cal_pm2 = pm;
-		lapic_cal_j2 = jiffies;
-		break;
-	}
-}
-
-static int __init calibrate_APIC_clock(void)
-{
-	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
-	const long pm_100ms = PMTMR_TICKS_PER_SEC/10;
-	const long pm_thresh = pm_100ms/100;
-	void (*real_handler)(struct clock_event_device *dev);
-	unsigned long deltaj;
-	long delta, deltapm;
-	int pm_referenced = 0;
-
-	local_irq_disable();
-
-	/* Replace the global interrupt handler */
-	real_handler = global_clock_event->event_handler;
-	global_clock_event->event_handler = lapic_cal_handler;
-
-	/*
-	 * Setup the APIC counter to 1e9. There is no way the lapic
-	 * can underflow in the 100ms detection time frame
-	 */
-	__setup_APIC_LVTT(1000000000, 0, 0);
-
-	/* Let the interrupts run */
-	local_irq_enable();
-
-	while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
-		cpu_relax();
-
-	local_irq_disable();
-
-	/* Restore the real event handler */
-	global_clock_event->event_handler = real_handler;
-
-	/* Build delta t1-t2 as apic timer counts down */
-	delta = lapic_cal_t1 - lapic_cal_t2;
-	apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
-
-	/* Check, if the PM timer is available */
-	deltapm = lapic_cal_pm2 - lapic_cal_pm1;
-	apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm);
-
-	if (deltapm) {
-		unsigned long mult;
-		u64 res;
-
-		mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, 22);
-
-		if (deltapm > (pm_100ms - pm_thresh) &&
-		    deltapm < (pm_100ms + pm_thresh)) {
-			apic_printk(APIC_VERBOSE, "... PM timer result ok\n");
-		} else {
-			res = (((u64) deltapm) *  mult) >> 22;
-			do_div(res, 1000000);
-			printk(KERN_WARNING "APIC calibration not consistent "
-			       "with PM Timer: %ldms instead of 100ms\n",
-			       (long)res);
-			/* Correct the lapic counter value */
-			res = (((u64) delta) * pm_100ms);
-			do_div(res, deltapm);
-			printk(KERN_INFO "APIC delta adjusted to PM-Timer: "
-			       "%lu (%ld)\n", (unsigned long) res, delta);
-			delta = (long) res;
-		}
-		pm_referenced = 1;
-	}
-
-	/* Calculate the scaled math multiplication factor */
-	lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS,
-				       lapic_clockevent.shift);
-	lapic_clockevent.max_delta_ns =
-		clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
-	lapic_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xF, &lapic_clockevent);
-
-	calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
-
-	apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
-	apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult);
-	apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
-		    calibration_result);
-
-	if (cpu_has_tsc) {
-		delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
-		apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
-			    "%ld.%04ld MHz.\n",
-			    (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ),
-			    (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ));
-	}
-
-	apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
-		    "%u.%04u MHz.\n",
-		    calibration_result / (1000000 / HZ),
-		    calibration_result % (1000000 / HZ));
-
-	/*
-	 * Do a sanity check on the APIC calibration result
-	 */
-	if (calibration_result < (1000000 / HZ)) {
-		local_irq_enable();
-		printk(KERN_WARNING
-		       "APIC frequency too slow, disabling apic timer\n");
-		return -1;
-	}
-
-	local_apic_timer_verify_ok = 1;
-
-	/* We trust the pm timer based calibration */
-	if (!pm_referenced) {
-		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
-
-		/*
-		 * Setup the apic timer manually
-		 */
-		levt->event_handler = lapic_cal_handler;
-		lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt);
-		lapic_cal_loops = -1;
-
-		/* Let the interrupts run */
-		local_irq_enable();
-
-		while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
-			cpu_relax();
-
-		local_irq_disable();
-
-		/* Stop the lapic timer */
-		lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt);
-
-		local_irq_enable();
-
-		/* Jiffies delta */
-		deltaj = lapic_cal_j2 - lapic_cal_j1;
-		apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj);
-
-		/* Check, if the jiffies result is consistent */
-		if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
-			apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
-		else
-			local_apic_timer_verify_ok = 0;
-	} else
-		local_irq_enable();
-
-	if (!local_apic_timer_verify_ok) {
-		printk(KERN_WARNING
-		       "APIC timer disabled due to verification failure.\n");
-			return -1;
-	}
-
-	return 0;
-}
-
-/*
- * Setup the boot APIC
- *
- * Calibrate and verify the result.
- */
-void __init setup_boot_APIC_clock(void)
-{
-	/*
-	 * The local apic timer can be disabled via the kernel
-	 * commandline or from the CPU detection code. Register the lapic
-	 * timer as a dummy clock event source on SMP systems, so the
-	 * broadcast mechanism is used. On UP systems simply ignore it.
-	 */
-	if (local_apic_timer_disabled) {
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1) {
-			lapic_clockevent.mult = 1;
-			setup_APIC_timer();
-		}
-		return;
-	}
-
-	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
-		    "calibrating APIC timer ...\n");
-
-	if (calibrate_APIC_clock()) {
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1)
-			setup_APIC_timer();
-		return;
-	}
-
-	/*
-	 * If nmi_watchdog is set to IO_APIC, we need the
-	 * PIT/HPET going.  Otherwise register lapic as a dummy
-	 * device.
-	 */
-	if (nmi_watchdog != NMI_IO_APIC)
-		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-	else
-		printk(KERN_WARNING "APIC timer registered as dummy,"
-			" due to nmi_watchdog=%d!\n", nmi_watchdog);
-
-	/* Setup the lapic or request the broadcast */
-	setup_APIC_timer();
-}
-
-void __devinit setup_secondary_APIC_clock(void)
-{
-	setup_APIC_timer();
-}
-
-/*
- * The guts of the apic timer interrupt
- */
-static void local_apic_timer_interrupt(void)
-{
-	int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(lapic_events, cpu);
-
-	/*
-	 * Normally we should not be here till LAPIC has been initialized but
-	 * in some cases like kdump, its possible that there is a pending LAPIC
-	 * timer interrupt from previous kernel's context and is delivered in
-	 * new kernel the moment interrupts are enabled.
-	 *
-	 * Interrupts are enabled early and LAPIC is setup much later, hence
-	 * its possible that when we get here evt->event_handler is NULL.
-	 * Check for event_handler being NULL and discard the interrupt as
-	 * spurious.
-	 */
-	if (!evt->event_handler) {
-		printk(KERN_WARNING
-		       "Spurious LAPIC timer interrupt on cpu %d\n", cpu);
-		/* Switch it off */
-		lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt);
-		return;
-	}
-
-	/*
-	 * the NMI deadlock-detector uses this.
-	 */
-	per_cpu(irq_stat, cpu).apic_timer_irqs++;
-
-	evt->event_handler(evt);
-}
-
-/*
- * Local APIC timer interrupt. This is the most natural way for doing
- * local interrupts, but local timer interrupts can be emulated by
- * broadcast interrupts too. [in case the hw doesn't support APIC timers]
- *
- * [ if a single-CPU system runs an SMP kernel then we call the local
- *   interrupt as well. Thus we cannot inline the local irq ... ]
- */
-void smp_apic_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	/*
-	 * NOTE! We'd better ACK the irq immediately,
-	 * because timer handling can be slow.
-	 */
-	ack_APIC_irq();
-	/*
-	 * update_process_times() expects us to have done irq_enter().
-	 * Besides, if we don't timer interrupts ignore the global
-	 * interrupt lock, which is the WrongThing (tm) to do.
-	 */
-	irq_enter();
-	local_apic_timer_interrupt();
-	irq_exit();
-
-	set_irq_regs(old_regs);
-}
-
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
-/*
- * Setup extended LVT, AMD specific (K8, family 10h)
- *
- * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
- * MCE interrupts are supported. Thus MCE offset must be set to 0.
- */
-
-#define APIC_EILVT_LVTOFF_MCE 0
-#define APIC_EILVT_LVTOFF_IBS 1
-
-static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
-{
-	unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
-	unsigned int  v   = (mask << 16) | (msg_type << 8) | vector;
-	apic_write(reg, v);
-}
-
-u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
-{
-	setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
-	return APIC_EILVT_LVTOFF_MCE;
-}
-
-u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
-{
-	setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
-	return APIC_EILVT_LVTOFF_IBS;
-}
-
-/*
- * Local APIC start and shutdown
- */
-
-/**
- * clear_local_APIC - shutdown the local APIC
- *
- * This is called, when a CPU is disabled and before rebooting, so the state of
- * the local APIC has no dangling leftovers. Also used to cleanout any BIOS
- * leftovers during boot.
- */
-void clear_local_APIC(void)
-{
-	int maxlvt;
-	u32 v;
-
-	/* APIC hasn't been mapped yet */
-	if (!apic_phys)
-		return;
-
-	maxlvt = lapic_get_maxlvt();
-	/*
-	 * Masking an LVT entry can trigger a local APIC error
-	 * if the vector is zero. Mask LVTERR first to prevent this.
-	 */
-	if (maxlvt >= 3) {
-		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
-		apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
-	}
-	/*
-	 * Careful: we have to set masks only first to deassert
-	 * any level-triggered sources.
-	 */
-	v = apic_read(APIC_LVTT);
-	apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
-	v = apic_read(APIC_LVT1);
-	apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
-	if (maxlvt >= 4) {
-		v = apic_read(APIC_LVTPC);
-		apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
-	}
-
-	/* lets not touch this if we didn't frob it */
-#ifdef CONFIG_X86_MCE_P4THERMAL
-	if (maxlvt >= 5) {
-		v = apic_read(APIC_LVTTHMR);
-		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
-	}
-#endif
-	/*
-	 * Clean APIC state for other OSs:
-	 */
-	apic_write(APIC_LVTT, APIC_LVT_MASKED);
-	apic_write(APIC_LVT0, APIC_LVT_MASKED);
-	apic_write(APIC_LVT1, APIC_LVT_MASKED);
-	if (maxlvt >= 3)
-		apic_write(APIC_LVTERR, APIC_LVT_MASKED);
-	if (maxlvt >= 4)
-		apic_write(APIC_LVTPC, APIC_LVT_MASKED);
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
-	if (maxlvt >= 5)
-		apic_write(APIC_LVTTHMR, APIC_LVT_MASKED);
-#endif
-	/* Integrated APIC (!82489DX) ? */
-	if (lapic_is_integrated()) {
-		if (maxlvt > 3)
-			/* Clear ESR due to Pentium errata 3AP and 11AP */
-			apic_write(APIC_ESR, 0);
-		apic_read(APIC_ESR);
-	}
-}
-
-/**
- * disable_local_APIC - clear and disable the local APIC
- */
-void disable_local_APIC(void)
-{
-	unsigned long value;
-
-	clear_local_APIC();
-
-	/*
-	 * Disable APIC (implies clearing of registers
-	 * for 82489DX!).
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_SPIV_APIC_ENABLED;
-	apic_write(APIC_SPIV, value);
-
-	/*
-	 * When LAPIC was disabled by the BIOS and enabled by the kernel,
-	 * restore the disabled state.
-	 */
-	if (enabled_via_apicbase) {
-		unsigned int l, h;
-
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		l &= ~MSR_IA32_APICBASE_ENABLE;
-		wrmsr(MSR_IA32_APICBASE, l, h);
-	}
-}
-
-/*
- * If Linux enabled the LAPIC against the BIOS default disable it down before
- * re-entering the BIOS on shutdown.  Otherwise the BIOS may get confused and
- * not power-off.  Additionally clear all LVT entries before disable_local_APIC
- * for the case where Linux didn't enable the LAPIC.
- */
-void lapic_shutdown(void)
-{
-	unsigned long flags;
-
-	if (!cpu_has_apic)
-		return;
-
-	local_irq_save(flags);
-	clear_local_APIC();
-
-	if (enabled_via_apicbase)
-		disable_local_APIC();
-
-	local_irq_restore(flags);
-}
-
-/*
- * This is to verify that we're looking at a real local APIC.
- * Check these against your board if the CPUs aren't getting
- * started for no apparent reason.
- */
-int __init verify_local_APIC(void)
-{
-	unsigned int reg0, reg1;
-
-	/*
-	 * The version register is read-only in a real APIC.
-	 */
-	reg0 = apic_read(APIC_LVR);
-	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
-	apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
-	reg1 = apic_read(APIC_LVR);
-	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
-
-	/*
-	 * The two version reads above should print the same
-	 * numbers.  If the second one is different, then we
-	 * poke at a non-APIC.
-	 */
-	if (reg1 != reg0)
-		return 0;
-
-	/*
-	 * Check if the version looks reasonably.
-	 */
-	reg1 = GET_APIC_VERSION(reg0);
-	if (reg1 == 0x00 || reg1 == 0xff)
-		return 0;
-	reg1 = lapic_get_maxlvt();
-	if (reg1 < 0x02 || reg1 == 0xff)
-		return 0;
-
-	/*
-	 * The ID register is read/write in a real APIC.
-	 */
-	reg0 = apic_read(APIC_ID);
-	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
-
-	/*
-	 * The next two are just to see if we have sane values.
-	 * They're only really relevant if we're in Virtual Wire
-	 * compatibility mode, but most boxes are anymore.
-	 */
-	reg0 = apic_read(APIC_LVT0);
-	apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
-	reg1 = apic_read(APIC_LVT1);
-	apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
-
-	return 1;
-}
-
-/**
- * sync_Arb_IDs - synchronize APIC bus arbitration IDs
- */
-void __init sync_Arb_IDs(void)
-{
-	/*
-	 * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
-	 * needed on AMD.
-	 */
-	if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
-		return;
-	/*
-	 * Wait for idle.
-	 */
-	apic_wait_icr_idle();
-
-	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
-	apic_write(APIC_ICR,
-		   APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
-}
-
-/*
- * An initial setup of the virtual wire mode.
- */
-void __init init_bsp_APIC(void)
-{
-	unsigned long value;
-
-	/*
-	 * Don't do the setup now if we have a SMP BIOS as the
-	 * through-I/O-APIC virtual wire mode might be active.
-	 */
-	if (smp_found_config || !cpu_has_apic)
-		return;
-
-	/*
-	 * Do not trust the local APIC being empty at bootup.
-	 */
-	clear_local_APIC();
-
-	/*
-	 * Enable APIC.
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	value |= APIC_SPIV_APIC_ENABLED;
-
-	/* This bit is reserved on P4/Xeon and should be cleared */
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    (boot_cpu_data.x86 == 15))
-		value &= ~APIC_SPIV_FOCUS_DISABLED;
-	else
-		value |= APIC_SPIV_FOCUS_DISABLED;
-	value |= SPURIOUS_APIC_VECTOR;
-	apic_write(APIC_SPIV, value);
-
-	/*
-	 * Set up the virtual wire mode.
-	 */
-	apic_write(APIC_LVT0, APIC_DM_EXTINT);
-	value = APIC_DM_NMI;
-	if (!lapic_is_integrated())		/* 82489DX */
-		value |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write(APIC_LVT1, value);
-}
-
-static void __cpuinit lapic_setup_esr(void)
-{
-	unsigned long oldvalue, value, maxlvt;
-	if (lapic_is_integrated() && !esr_disable) {
-		/* !82489DX */
-		maxlvt = lapic_get_maxlvt();
-		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
-			apic_write(APIC_ESR, 0);
-		oldvalue = apic_read(APIC_ESR);
-
-		/* enables sending errors */
-		value = ERROR_APIC_VECTOR;
-		apic_write(APIC_LVTERR, value);
-		/*
-		 * spec says clear errors after enabling vector.
-		 */
-		if (maxlvt > 3)
-			apic_write(APIC_ESR, 0);
-		value = apic_read(APIC_ESR);
-		if (value != oldvalue)
-			apic_printk(APIC_VERBOSE, "ESR value before enabling "
-				"vector: 0x%08lx  after: 0x%08lx\n",
-				oldvalue, value);
-	} else {
-		if (esr_disable)
-			/*
-			 * Something untraceable is creating bad interrupts on
-			 * secondary quads ... for the moment, just leave the
-			 * ESR disabled - we can't do anything useful with the
-			 * errors anyway - mbligh
-			 */
-			printk(KERN_INFO "Leaving ESR disabled.\n");
-		else
-			printk(KERN_INFO "No ESR for 82489DX.\n");
-	}
-}
-
-
-/**
- * setup_local_APIC - setup the local APIC
- */
-void __cpuinit setup_local_APIC(void)
-{
-	unsigned long value, integrated;
-	int i, j;
-
-	/* Pound the ESR really hard over the head with a big hammer - mbligh */
-	if (esr_disable) {
-		apic_write(APIC_ESR, 0);
-		apic_write(APIC_ESR, 0);
-		apic_write(APIC_ESR, 0);
-		apic_write(APIC_ESR, 0);
-	}
-
-	integrated = lapic_is_integrated();
-
-	/*
-	 * Double-check whether this APIC is really registered.
-	 */
-	if (!apic_id_registered())
-		WARN_ON_ONCE(1);
-
-	/*
-	 * Intel recommends to set DFR, LDR and TPR before enabling
-	 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
-	 * document number 292116).  So here it goes...
-	 */
-	init_apic_ldr();
-
-	/*
-	 * Set Task Priority to 'accept all'. We never change this
-	 * later on.
-	 */
-	value = apic_read(APIC_TASKPRI);
-	value &= ~APIC_TPRI_MASK;
-	apic_write(APIC_TASKPRI, value);
-
-	/*
-	 * After a crash, we no longer service the interrupts and a pending
-	 * interrupt from previous kernel might still have ISR bit set.
-	 *
-	 * Most probably by now CPU has serviced that pending interrupt and
-	 * it might not have done the ack_APIC_irq() because it thought,
-	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
-	 * does not clear the ISR bit and cpu thinks it has already serivced
-	 * the interrupt. Hence a vector might get locked. It was noticed
-	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
-	 */
-	for (i = APIC_ISR_NR - 1; i >= 0; i--) {
-		value = apic_read(APIC_ISR + i*0x10);
-		for (j = 31; j >= 0; j--) {
-			if (value & (1<<j))
-				ack_APIC_irq();
-		}
-	}
-
-	/*
-	 * Now that we are all set up, enable the APIC
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	/*
-	 * Enable APIC
-	 */
-	value |= APIC_SPIV_APIC_ENABLED;
-
-	/*
-	 * Some unknown Intel IO/APIC (or APIC) errata is biting us with
-	 * certain networking cards. If high frequency interrupts are
-	 * happening on a particular IOAPIC pin, plus the IOAPIC routing
-	 * entry is masked/unmasked at a high rate as well then sooner or
-	 * later IOAPIC line gets 'stuck', no more interrupts are received
-	 * from the device. If focus CPU is disabled then the hang goes
-	 * away, oh well :-(
-	 *
-	 * [ This bug can be reproduced easily with a level-triggered
-	 *   PCI Ne2000 networking cards and PII/PIII processors, dual
-	 *   BX chipset. ]
-	 */
-	/*
-	 * Actually disabling the focus CPU check just makes the hang less
-	 * frequent as it makes the interrupt distributon model be more
-	 * like LRU than MRU (the short-term load is more even across CPUs).
-	 * See also the comment in end_level_ioapic_irq().  --macro
-	 */
-
-	/* Enable focus processor (bit==0) */
-	value &= ~APIC_SPIV_FOCUS_DISABLED;
-
-	/*
-	 * Set spurious IRQ vector
-	 */
-	value |= SPURIOUS_APIC_VECTOR;
-	apic_write(APIC_SPIV, value);
-
-	/*
-	 * Set up LVT0, LVT1:
-	 *
-	 * set up through-local-APIC on the BP's LINT0. This is not
-	 * strictly necessary in pure symmetric-IO mode, but sometimes
-	 * we delegate interrupts to the 8259A.
-	 */
-	/*
-	 * TODO: set up through-local-APIC from through-I/O-APIC? --macro
-	 */
-	value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
-	if (!smp_processor_id() && (pic_mode || !value)) {
-		value = APIC_DM_EXTINT;
-		apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
-				smp_processor_id());
-	} else {
-		value = APIC_DM_EXTINT | APIC_LVT_MASKED;
-		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
-				smp_processor_id());
-	}
-	apic_write(APIC_LVT0, value);
-
-	/*
-	 * only the BP should see the LINT1 NMI signal, obviously.
-	 */
-	if (!smp_processor_id())
-		value = APIC_DM_NMI;
-	else
-		value = APIC_DM_NMI | APIC_LVT_MASKED;
-	if (!integrated)		/* 82489DX */
-		value |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write(APIC_LVT1, value);
-}
-
-void __cpuinit end_local_APIC_setup(void)
-{
-	unsigned long value;
-
-	lapic_setup_esr();
-	/* Disable the local apic timer */
-	value = apic_read(APIC_LVTT);
-	value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-	apic_write(APIC_LVTT, value);
-
-	setup_apic_nmi_watchdog(NULL);
-	apic_pm_activate();
-}
-
-/*
- * Detect and initialize APIC
- */
-static int __init detect_init_APIC(void)
-{
-	u32 h, l, features;
-
-	/* Disabled by kernel option? */
-	if (disable_apic)
-		return -1;
-
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_AMD:
-		if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
-		    (boot_cpu_data.x86 == 15))
-			break;
-		goto no_apic;
-	case X86_VENDOR_INTEL:
-		if (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15 ||
-		    (boot_cpu_data.x86 == 5 && cpu_has_apic))
-			break;
-		goto no_apic;
-	default:
-		goto no_apic;
-	}
-
-	if (!cpu_has_apic) {
-		/*
-		 * Over-ride BIOS and try to enable the local APIC only if
-		 * "lapic" specified.
-		 */
-		if (!force_enable_local_apic) {
-			printk(KERN_INFO "Local APIC disabled by BIOS -- "
-			       "you can enable it with \"lapic\"\n");
-			return -1;
-		}
-		/*
-		 * Some BIOSes disable the local APIC in the APIC_BASE
-		 * MSR. This can only be done in software for Intel P6 or later
-		 * and AMD K7 (Model > 1) or later.
-		 */
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
-			printk(KERN_INFO
-			       "Local APIC disabled by BIOS -- reenabling.\n");
-			l &= ~MSR_IA32_APICBASE_BASE;
-			l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
-			wrmsr(MSR_IA32_APICBASE, l, h);
-			enabled_via_apicbase = 1;
-		}
-	}
-	/*
-	 * The APIC feature bit should now be enabled
-	 * in `cpuid'
-	 */
-	features = cpuid_edx(1);
-	if (!(features & (1 << X86_FEATURE_APIC))) {
-		printk(KERN_WARNING "Could not enable APIC!\n");
-		return -1;
-	}
-	set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
-	/* The BIOS may have set up the APIC at some other address */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (l & MSR_IA32_APICBASE_ENABLE)
-		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
-
-	printk(KERN_INFO "Found and enabled local APIC!\n");
-
-	apic_pm_activate();
-
-	return 0;
-
-no_apic:
-	printk(KERN_INFO "No local APIC present or hardware disabled\n");
-	return -1;
-}
-
-/**
- * init_apic_mappings - initialize APIC mappings
- */
-void __init init_apic_mappings(void)
-{
-	/*
-	 * If no local APIC can be found then set up a fake all
-	 * zeroes page to simulate the local APIC and another
-	 * one for the IO-APIC.
-	 */
-	if (!smp_found_config && detect_init_APIC()) {
-		apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
-		apic_phys = __pa(apic_phys);
-	} else
-		apic_phys = mp_lapic_addr;
-
-	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
-	printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE,
-	       apic_phys);
-
-	/*
-	 * Fetch the APIC ID of the BSP in case we have a
-	 * default configuration (or the MP table is broken).
-	 */
-	if (boot_cpu_physical_apicid == -1U)
-		boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
-
-}
-
-/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
- */
-
-int apic_version[MAX_APICS];
-
-int __init APIC_init_uniprocessor(void)
-{
-	if (!smp_found_config && !cpu_has_apic)
-		return -1;
-
-	/*
-	 * Complain if the BIOS pretends there is one.
-	 */
-	if (!cpu_has_apic &&
-	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
-		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
-		       boot_cpu_physical_apicid);
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
-		return -1;
-	}
-
-	verify_local_APIC();
-
-	connect_bsp_APIC();
-
-	/*
-	 * Hack: In case of kdump, after a crash, kernel might be booting
-	 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
-	 * might be zero if read from MP tables. Get it from LAPIC.
-	 */
-#ifdef CONFIG_CRASH_DUMP
-	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
-#endif
-	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
-
-	setup_local_APIC();
-
-#ifdef CONFIG_X86_IO_APIC
-	if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
-#endif
-		localise_nmi_watchdog();
-	end_local_APIC_setup();
-#ifdef CONFIG_X86_IO_APIC
-	if (smp_found_config)
-		if (!skip_ioapic_setup && nr_ioapics)
-			setup_IO_APIC();
-#endif
-	setup_boot_clock();
-
-	return 0;
-}
-
-/*
- * Local APIC interrupts
- */
-
-/*
- * This interrupt should _never_ happen with our APIC/SMP architecture
- */
-void smp_spurious_interrupt(struct pt_regs *regs)
-{
-	unsigned long v;
-
-	irq_enter();
-	/*
-	 * Check if this really is a spurious interrupt and ACK it
-	 * if it is a vectored one.  Just in case...
-	 * Spurious interrupts should not be ACKed.
-	 */
-	v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
-	if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
-		ack_APIC_irq();
-
-	/* see sw-dev-man vol 3, chapter 7.4.13.5 */
-	printk(KERN_INFO "spurious APIC interrupt on CPU#%d, "
-	       "should never happen.\n", smp_processor_id());
-	__get_cpu_var(irq_stat).irq_spurious_count++;
-	irq_exit();
-}
-
-/*
- * This interrupt should never happen with our APIC/SMP architecture
- */
-void smp_error_interrupt(struct pt_regs *regs)
-{
-	unsigned long v, v1;
-
-	irq_enter();
-	/* First tickle the hardware, only then report what went on. -- REW */
-	v = apic_read(APIC_ESR);
-	apic_write(APIC_ESR, 0);
-	v1 = apic_read(APIC_ESR);
-	ack_APIC_irq();
-	atomic_inc(&irq_err_count);
-
-	/* Here is what the APIC error bits mean:
-	   0: Send CS error
-	   1: Receive CS error
-	   2: Send accept error
-	   3: Receive accept error
-	   4: Reserved
-	   5: Send illegal vector
-	   6: Received illegal vector
-	   7: Illegal register address
-	*/
-	printk(KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n",
-		smp_processor_id(), v , v1);
-	irq_exit();
-}
-
-#ifdef CONFIG_SMP
-void __init smp_intr_init(void)
-{
-	/*
-	 * IRQ0 must be given a fixed assignment and initialized,
-	 * because it's used before the IO-APIC is set up.
-	 */
-	set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
-
-	/*
-	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
-	 * IPI, driven by wakeup.
-	 */
-	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
-	/* IPI for invalidation */
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
-
-	/* IPI for generic function call */
-	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
-	/* IPI for single call function */
-	set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
-				call_function_single_interrupt);
-}
-#endif
-
-/*
- * Initialize APIC interrupts
- */
-void __init apic_intr_init(void)
-{
-#ifdef CONFIG_SMP
-	smp_intr_init();
-#endif
-	/* self generated IPI for local APIC timer */
-	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
-	/* IPI vectors for APIC spurious and error interrupts */
-	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
-	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
-	/* thermal monitor LVT interrupt */
-#ifdef CONFIG_X86_MCE_P4THERMAL
-	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-#endif
-}
-
-/**
- * connect_bsp_APIC - attach the APIC to the interrupt system
- */
-void __init connect_bsp_APIC(void)
-{
-	if (pic_mode) {
-		/*
-		 * Do not trust the local APIC being empty at bootup.
-		 */
-		clear_local_APIC();
-		/*
-		 * PIC mode, enable APIC mode in the IMCR, i.e.  connect BSP's
-		 * local APIC to INT and NMI lines.
-		 */
-		apic_printk(APIC_VERBOSE, "leaving PIC mode, "
-				"enabling APIC mode.\n");
-		outb(0x70, 0x22);
-		outb(0x01, 0x23);
-	}
-	enable_apic_mode();
-}
-
-/**
- * disconnect_bsp_APIC - detach the APIC from the interrupt system
- * @virt_wire_setup:	indicates, whether virtual wire mode is selected
- *
- * Virtual wire mode is necessary to deliver legacy interrupts even when the
- * APIC is disabled.
- */
-void disconnect_bsp_APIC(int virt_wire_setup)
-{
-	if (pic_mode) {
-		/*
-		 * Put the board back into PIC mode (has an effect only on
-		 * certain older boards).  Note that APIC interrupts, including
-		 * IPIs, won't work beyond this point!  The only exception are
-		 * INIT IPIs.
-		 */
-		apic_printk(APIC_VERBOSE, "disabling APIC mode, "
-				"entering PIC mode.\n");
-		outb(0x70, 0x22);
-		outb(0x00, 0x23);
-	} else {
-		/* Go back to Virtual Wire compatibility mode */
-		unsigned long value;
-
-		/* For the spurious interrupt use vector F, and enable it */
-		value = apic_read(APIC_SPIV);
-		value &= ~APIC_VECTOR_MASK;
-		value |= APIC_SPIV_APIC_ENABLED;
-		value |= 0xf;
-		apic_write(APIC_SPIV, value);
-
-		if (!virt_wire_setup) {
-			/*
-			 * For LVT0 make it edge triggered, active high,
-			 * external and enabled
-			 */
-			value = apic_read(APIC_LVT0);
-			value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
-				APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-				APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
-			value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-			value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
-			apic_write(APIC_LVT0, value);
-		} else {
-			/* Disable LVT0 */
-			apic_write(APIC_LVT0, APIC_LVT_MASKED);
-		}
-
-		/*
-		 * For LVT1 make it edge triggered, active high, nmi and
-		 * enabled
-		 */
-		value = apic_read(APIC_LVT1);
-		value &= ~(
-			APIC_MODE_MASK | APIC_SEND_PENDING |
-			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
-		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
-		apic_write(APIC_LVT1, value);
-	}
-}
-
-void __cpuinit generic_processor_info(int apicid, int version)
-{
-	int cpu;
-	cpumask_t tmp_map;
-	physid_mask_t phys_cpu;
-
-	/*
-	 * Validate version
-	 */
-	if (version == 0x0) {
-		printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
-				"fixing up to 0x10. (tell your hw vendor)\n",
-				version);
-		version = 0x10;
-	}
-	apic_version[apicid] = version;
-
-	phys_cpu = apicid_to_cpu_present(apicid);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
-	if (num_processors >= NR_CPUS) {
-		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
-			"  Processor ignored.\n", NR_CPUS);
-		return;
-	}
-
-	num_processors++;
-	cpus_complement(tmp_map, cpu_present_map);
-	cpu = first_cpu(tmp_map);
-
-	if (apicid == boot_cpu_physical_apicid)
-		/*
-		 * x86_bios_cpu_apicid is required to have processors listed
-		 * in same order as logical cpu numbers. Hence the first
-		 * entry is BSP, and so on.
-		 */
-		cpu = 0;
-
-	if (apicid > max_physical_apicid)
-		max_physical_apicid = apicid;
-
-	/*
-	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
-	 * but we need to work other dependencies like SMP_SUSPEND etc
-	 * before this can be done without some confusion.
-	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
-	 *       - Ashok Raj <ashok.raj@intel.com>
-	 */
-	if (max_physical_apicid >= 8) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (!APIC_XAPIC(version)) {
-				def_to_bigsmp = 0;
-				break;
-			}
-			/* If P4 and above fall through */
-		case X86_VENDOR_AMD:
-			def_to_bigsmp = 1;
-		}
-	}
-#ifdef CONFIG_SMP
-	/* are we being called early in kernel startup? */
-	if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
-		u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
-		u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
-
-		cpu_to_apicid[cpu] = apicid;
-		bios_cpu_apicid[cpu] = apicid;
-	} else {
-		per_cpu(x86_cpu_to_apicid, cpu) = apicid;
-		per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
-	}
-#endif
-	cpu_set(cpu, cpu_possible_map);
-	cpu_set(cpu, cpu_present_map);
-}
-
-/*
- * Power management
- */
-#ifdef CONFIG_PM
-
-static struct {
-	int active;
-	/* r/w apic fields */
-	unsigned int apic_id;
-	unsigned int apic_taskpri;
-	unsigned int apic_ldr;
-	unsigned int apic_dfr;
-	unsigned int apic_spiv;
-	unsigned int apic_lvtt;
-	unsigned int apic_lvtpc;
-	unsigned int apic_lvt0;
-	unsigned int apic_lvt1;
-	unsigned int apic_lvterr;
-	unsigned int apic_tmict;
-	unsigned int apic_tdcr;
-	unsigned int apic_thmr;
-} apic_pm_state;
-
-static int lapic_suspend(struct sys_device *dev, pm_message_t state)
-{
-	unsigned long flags;
-	int maxlvt;
-
-	if (!apic_pm_state.active)
-		return 0;
-
-	maxlvt = lapic_get_maxlvt();
-
-	apic_pm_state.apic_id = apic_read(APIC_ID);
-	apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
-	apic_pm_state.apic_ldr = apic_read(APIC_LDR);
-	apic_pm_state.apic_dfr = apic_read(APIC_DFR);
-	apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
-	apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
-	if (maxlvt >= 4)
-		apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
-	apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
-	apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
-	apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
-	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
-	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#ifdef CONFIG_X86_MCE_P4THERMAL
-	if (maxlvt >= 5)
-		apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
-#endif
-
-	local_irq_save(flags);
-	disable_local_APIC();
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int lapic_resume(struct sys_device *dev)
-{
-	unsigned int l, h;
-	unsigned long flags;
-	int maxlvt;
-
-	if (!apic_pm_state.active)
-		return 0;
-
-	maxlvt = lapic_get_maxlvt();
-
-	local_irq_save(flags);
-
-	/*
-	 * Make sure the APICBASE points to the right address
-	 *
-	 * FIXME! This will be wrong if we ever support suspend on
-	 * SMP! We'll need to do this as part of the CPU restore!
-	 */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	l &= ~MSR_IA32_APICBASE_BASE;
-	l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-	wrmsr(MSR_IA32_APICBASE, l, h);
-
-	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
-	apic_write(APIC_ID, apic_pm_state.apic_id);
-	apic_write(APIC_DFR, apic_pm_state.apic_dfr);
-	apic_write(APIC_LDR, apic_pm_state.apic_ldr);
-	apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
-	apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
-	apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
-	apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#ifdef CONFIG_X86_MCE_P4THERMAL
-	if (maxlvt >= 5)
-		apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
-#endif
-	if (maxlvt >= 4)
-		apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
-	apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
-	apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
-	apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-	apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-	local_irq_restore(flags);
-	return 0;
-}
-
-/*
- * This device has no shutdown method - fully functioning local APICs
- * are needed on every CPU up until machine_halt/restart/poweroff.
- */
-
-static struct sysdev_class lapic_sysclass = {
-	.name		= "lapic",
-	.resume		= lapic_resume,
-	.suspend	= lapic_suspend,
-};
-
-static struct sys_device device_lapic = {
-	.id	= 0,
-	.cls	= &lapic_sysclass,
-};
-
-static void __devinit apic_pm_activate(void)
-{
-	apic_pm_state.active = 1;
-}
-
-static int __init init_lapic_sysfs(void)
-{
-	int error;
-
-	if (!cpu_has_apic)
-		return 0;
-	/* XXX: remove suspend/resume procs if !apic_pm_state.active? */
-
-	error = sysdev_class_register(&lapic_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic);
-	return error;
-}
-device_initcall(init_lapic_sysfs);
-
-#else	/* CONFIG_PM */
-
-static void apic_pm_activate(void) { }
-
-#endif	/* CONFIG_PM */
-
-/*
- * APIC command line parameters
- */
-static int __init parse_lapic(char *arg)
-{
-	force_enable_local_apic = 1;
-	return 0;
-}
-early_param("lapic", parse_lapic);
-
-static int __init parse_nolapic(char *arg)
-{
-	disable_apic = 1;
-	setup_clear_cpu_cap(X86_FEATURE_APIC);
-	return 0;
-}
-early_param("nolapic", parse_nolapic);
-
-static int __init parse_disable_lapic_timer(char *arg)
-{
-	local_apic_timer_disabled = 1;
-	return 0;
-}
-early_param("nolapic_timer", parse_disable_lapic_timer);
-
-static int __init parse_lapic_timer_c2_ok(char *arg)
-{
-	local_apic_timer_c2_ok = 1;
-	return 0;
-}
-early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
-
-static int __init apic_set_verbosity(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp(arg, "debug") == 0)
-		apic_verbosity = APIC_DEBUG;
-	else if (strcmp(arg, "verbose") == 0)
-		apic_verbosity = APIC_VERBOSE;
-
-	return 0;
-}
-early_param("apic", apic_set_verbosity);
-
-static int __init lapic_insert_resource(void)
-{
-	if (!apic_phys)
-		return -1;
-
-	/* Put local APIC into the resource map. */
-	lapic_resource.start = apic_phys;
-	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
-	insert_resource(&iomem_resource, &lapic_resource);
-
-	return 0;
-}
-
-/*
- * need call insert after e820_reserve_resources()
- * that is using request_resource
- */
-late_initcall(lapic_insert_resource);
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
deleted file mode 100644
index 446c062..0000000
--- a/arch/x86/kernel/apic_64.c
+++ /dev/null
@@ -1,1390 +0,0 @@
-/*
- *	Local APIC handling, local APIC timers
- *
- *	(c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
- *					thanks to Eric Gilmore
- *					and Rolf G. Tews
- *					for testing these extensively.
- *	Maciej W. Rozycki	:	Various updates and fixes.
- *	Mikael Pettersson	:	Power Management for UP-APIC.
- *	Pavel Machek and
- *	Mikael Pettersson	:	PM converted to driver model.
- */
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/clockchips.h>
-#include <linux/acpi_pmtmr.h>
-#include <linux/module.h>
-
-#include <asm/atomic.h>
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/hpet.h>
-#include <asm/pgalloc.h>
-#include <asm/nmi.h>
-#include <asm/idle.h>
-#include <asm/proto.h>
-#include <asm/timex.h>
-#include <asm/apic.h>
-
-#include <mach_ipi.h>
-#include <mach_apic.h>
-
-static int disable_apic_timer __cpuinitdata;
-static int apic_calibrate_pmtmr __initdata;
-int disable_apic;
-
-/* Local APIC timer works in C2 */
-int local_apic_timer_c2_ok;
-EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
-
-/*
- * Debug level, exported for io_apic.c
- */
-unsigned int apic_verbosity;
-
-/* Have we found an MP table */
-int smp_found_config;
-
-static struct resource lapic_resource = {
-	.name = "Local APIC",
-	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
-};
-
-static unsigned int calibration_result;
-
-static int lapic_next_event(unsigned long delta,
-			    struct clock_event_device *evt);
-static void lapic_timer_setup(enum clock_event_mode mode,
-			      struct clock_event_device *evt);
-static void lapic_timer_broadcast(cpumask_t mask);
-static void apic_pm_activate(void);
-
-static struct clock_event_device lapic_clockevent = {
-	.name		= "lapic",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
-			| CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
-	.shift		= 32,
-	.set_mode	= lapic_timer_setup,
-	.set_next_event	= lapic_next_event,
-	.broadcast	= lapic_timer_broadcast,
-	.rating		= 100,
-	.irq		= -1,
-};
-static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
-
-static unsigned long apic_phys;
-
-unsigned long mp_lapic_addr;
-
-/*
- * Get the LAPIC version
- */
-static inline int lapic_get_version(void)
-{
-	return GET_APIC_VERSION(apic_read(APIC_LVR));
-}
-
-/*
- * Check, if the APIC is integrated or a seperate chip
- */
-static inline int lapic_is_integrated(void)
-{
-	return 1;
-}
-
-/*
- * Check, whether this is a modern or a first generation APIC
- */
-static int modern_apic(void)
-{
-	/* AMD systems use old APIC versions, so check the CPU */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-	    boot_cpu_data.x86 >= 0xf)
-		return 1;
-	return lapic_get_version() >= 0x14;
-}
-
-void apic_wait_icr_idle(void)
-{
-	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
-		cpu_relax();
-}
-
-u32 safe_apic_wait_icr_idle(void)
-{
-	u32 send_status;
-	int timeout;
-
-	timeout = 0;
-	do {
-		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
-		if (!send_status)
-			break;
-		udelay(100);
-	} while (timeout++ < 1000);
-
-	return send_status;
-}
-
-/**
- * enable_NMI_through_LVT0 - enable NMI through local vector table 0
- */
-void __cpuinit enable_NMI_through_LVT0(void)
-{
-	unsigned int v;
-
-	/* unmask and set to NMI */
-	v = APIC_DM_NMI;
-	apic_write(APIC_LVT0, v);
-}
-
-/**
- * lapic_get_maxlvt - get the maximum number of local vector table entries
- */
-int lapic_get_maxlvt(void)
-{
-	unsigned int v, maxlvt;
-
-	v = apic_read(APIC_LVR);
-	maxlvt = GET_APIC_MAXLVT(v);
-	return maxlvt;
-}
-
-/*
- * This function sets up the local APIC timer, with a timeout of
- * 'clocks' APIC bus clock. During calibration we actually call
- * this function twice on the boot CPU, once with a bogus timeout
- * value, second time for real. The other (noncalibrating) CPUs
- * call this function only once, with the real, calibrated value.
- *
- * We do reads before writes even if unnecessary, to get around the
- * P5 APIC double write bug.
- */
-
-static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
-{
-	unsigned int lvtt_value, tmp_value;
-
-	lvtt_value = LOCAL_TIMER_VECTOR;
-	if (!oneshot)
-		lvtt_value |= APIC_LVT_TIMER_PERIODIC;
-	if (!irqen)
-		lvtt_value |= APIC_LVT_MASKED;
-
-	apic_write(APIC_LVTT, lvtt_value);
-
-	/*
-	 * Divide PICLK by 16
-	 */
-	tmp_value = apic_read(APIC_TDCR);
-	apic_write(APIC_TDCR, (tmp_value
-				& ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
-				| APIC_TDR_DIV_16);
-
-	if (!oneshot)
-		apic_write(APIC_TMICT, clocks);
-}
-
-/*
- * Setup extended LVT, AMD specific (K8, family 10h)
- *
- * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
- * MCE interrupts are supported. Thus MCE offset must be set to 0.
- */
-
-#define APIC_EILVT_LVTOFF_MCE 0
-#define APIC_EILVT_LVTOFF_IBS 1
-
-static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
-{
-	unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
-	unsigned int  v   = (mask << 16) | (msg_type << 8) | vector;
-
-	apic_write(reg, v);
-}
-
-u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
-{
-	setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
-	return APIC_EILVT_LVTOFF_MCE;
-}
-
-u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
-{
-	setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
-	return APIC_EILVT_LVTOFF_IBS;
-}
-
-/*
- * Program the next event, relative to now
- */
-static int lapic_next_event(unsigned long delta,
-			    struct clock_event_device *evt)
-{
-	apic_write(APIC_TMICT, delta);
-	return 0;
-}
-
-/*
- * Setup the lapic timer in periodic or oneshot mode
- */
-static void lapic_timer_setup(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
-{
-	unsigned long flags;
-	unsigned int v;
-
-	/* Lapic used as dummy for broadcast ? */
-	if (evt->features & CLOCK_EVT_FEAT_DUMMY)
-		return;
-
-	local_irq_save(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-	case CLOCK_EVT_MODE_ONESHOT:
-		__setup_APIC_LVTT(calibration_result,
-				  mode != CLOCK_EVT_MODE_PERIODIC, 1);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		v = apic_read(APIC_LVTT);
-		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-		apic_write(APIC_LVTT, v);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		/* Nothing to do here */
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-/*
- * Local APIC timer broadcast function
- */
-static void lapic_timer_broadcast(cpumask_t mask)
-{
-#ifdef CONFIG_SMP
-	send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
-#endif
-}
-
-/*
- * Setup the local APIC timer for this CPU. Copy the initilized values
- * of the boot CPU and register the clock event in the framework.
- */
-static void setup_APIC_timer(void)
-{
-	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
-
-	memcpy(levt, &lapic_clockevent, sizeof(*levt));
-	levt->cpumask = cpumask_of_cpu(smp_processor_id());
-
-	clockevents_register_device(levt);
-}
-
-/*
- * In this function we calibrate APIC bus clocks to the external
- * timer. Unfortunately we cannot use jiffies and the timer irq
- * to calibrate, since some later bootup code depends on getting
- * the first irq? Ugh.
- *
- * We want to do the calibration only once since we
- * want to have local timer irqs syncron. CPUs connected
- * by the same APIC bus have the very same bus frequency.
- * And we want to have irqs off anyways, no accidental
- * APIC irq that way.
- */
-
-#define TICK_COUNT 100000000
-
-static int __init calibrate_APIC_clock(void)
-{
-	unsigned apic, apic_start;
-	unsigned long tsc, tsc_start;
-	int result;
-
-	local_irq_disable();
-
-	/*
-	 * Put whatever arbitrary (but long enough) timeout
-	 * value into the APIC clock, we just want to get the
-	 * counter running for calibration.
-	 *
-	 * No interrupt enable !
-	 */
-	__setup_APIC_LVTT(250000000, 0, 0);
-
-	apic_start = apic_read(APIC_TMCCT);
-#ifdef CONFIG_X86_PM_TIMER
-	if (apic_calibrate_pmtmr && pmtmr_ioport) {
-		pmtimer_wait(5000);  /* 5ms wait */
-		apic = apic_read(APIC_TMCCT);
-		result = (apic_start - apic) * 1000L / 5;
-	} else
-#endif
-	{
-		rdtscll(tsc_start);
-
-		do {
-			apic = apic_read(APIC_TMCCT);
-			rdtscll(tsc);
-		} while ((tsc - tsc_start) < TICK_COUNT &&
-				(apic_start - apic) < TICK_COUNT);
-
-		result = (apic_start - apic) * 1000L * tsc_khz /
-					(tsc - tsc_start);
-	}
-
-	local_irq_enable();
-
-	printk(KERN_DEBUG "APIC timer calibration result %d\n", result);
-
-	printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n",
-		result / 1000 / 1000, result / 1000 % 1000);
-
-	/* Calculate the scaled math multiplication factor */
-	lapic_clockevent.mult = div_sc(result, NSEC_PER_SEC,
-				       lapic_clockevent.shift);
-	lapic_clockevent.max_delta_ns =
-		clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
-	lapic_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xF, &lapic_clockevent);
-
-	calibration_result = result / HZ;
-
-	/*
-	 * Do a sanity check on the APIC calibration result
-	 */
-	if (calibration_result < (1000000 / HZ)) {
-		printk(KERN_WARNING
-			"APIC frequency too slow, disabling apic timer\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-/*
- * Setup the boot APIC
- *
- * Calibrate and verify the result.
- */
-void __init setup_boot_APIC_clock(void)
-{
-	/*
-	 * The local apic timer can be disabled via the kernel commandline.
-	 * Register the lapic timer as a dummy clock event source on SMP
-	 * systems, so the broadcast mechanism is used. On UP systems simply
-	 * ignore it.
-	 */
-	if (disable_apic_timer) {
-		printk(KERN_INFO "Disabling APIC timer\n");
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1) {
-			lapic_clockevent.mult = 1;
-			setup_APIC_timer();
-		}
-		return;
-	}
-
-	printk(KERN_INFO "Using local APIC timer interrupts.\n");
-	if (calibrate_APIC_clock()) {
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1)
-			setup_APIC_timer();
-		return;
-	}
-
-	/*
-	 * If nmi_watchdog is set to IO_APIC, we need the
-	 * PIT/HPET going.  Otherwise register lapic as a dummy
-	 * device.
-	 */
-	if (nmi_watchdog != NMI_IO_APIC)
-		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-	else
-		printk(KERN_WARNING "APIC timer registered as dummy,"
-			" due to nmi_watchdog=%d!\n", nmi_watchdog);
-
-	setup_APIC_timer();
-}
-
-void __cpuinit setup_secondary_APIC_clock(void)
-{
-	setup_APIC_timer();
-}
-
-/*
- * The guts of the apic timer interrupt
- */
-static void local_apic_timer_interrupt(void)
-{
-	int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(lapic_events, cpu);
-
-	/*
-	 * Normally we should not be here till LAPIC has been initialized but
-	 * in some cases like kdump, its possible that there is a pending LAPIC
-	 * timer interrupt from previous kernel's context and is delivered in
-	 * new kernel the moment interrupts are enabled.
-	 *
-	 * Interrupts are enabled early and LAPIC is setup much later, hence
-	 * its possible that when we get here evt->event_handler is NULL.
-	 * Check for event_handler being NULL and discard the interrupt as
-	 * spurious.
-	 */
-	if (!evt->event_handler) {
-		printk(KERN_WARNING
-		       "Spurious LAPIC timer interrupt on cpu %d\n", cpu);
-		/* Switch it off */
-		lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt);
-		return;
-	}
-
-	/*
-	 * the NMI deadlock-detector uses this.
-	 */
-	add_pda(apic_timer_irqs, 1);
-
-	evt->event_handler(evt);
-}
-
-/*
- * Local APIC timer interrupt. This is the most natural way for doing
- * local interrupts, but local timer interrupts can be emulated by
- * broadcast interrupts too. [in case the hw doesn't support APIC timers]
- *
- * [ if a single-CPU system runs an SMP kernel then we call the local
- *   interrupt as well. Thus we cannot inline the local irq ... ]
- */
-void smp_apic_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	/*
-	 * NOTE! We'd better ACK the irq immediately,
-	 * because timer handling can be slow.
-	 */
-	ack_APIC_irq();
-	/*
-	 * update_process_times() expects us to have done irq_enter().
-	 * Besides, if we don't timer interrupts ignore the global
-	 * interrupt lock, which is the WrongThing (tm) to do.
-	 */
-	exit_idle();
-	irq_enter();
-	local_apic_timer_interrupt();
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
-
-/*
- * Local APIC start and shutdown
- */
-
-/**
- * clear_local_APIC - shutdown the local APIC
- *
- * This is called, when a CPU is disabled and before rebooting, so the state of
- * the local APIC has no dangling leftovers. Also used to cleanout any BIOS
- * leftovers during boot.
- */
-void clear_local_APIC(void)
-{
-	int maxlvt;
-	u32 v;
-
-	/* APIC hasn't been mapped yet */
-	if (!apic_phys)
-		return;
-
-	maxlvt = lapic_get_maxlvt();
-	/*
-	 * Masking an LVT entry can trigger a local APIC error
-	 * if the vector is zero. Mask LVTERR first to prevent this.
-	 */
-	if (maxlvt >= 3) {
-		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
-		apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
-	}
-	/*
-	 * Careful: we have to set masks only first to deassert
-	 * any level-triggered sources.
-	 */
-	v = apic_read(APIC_LVTT);
-	apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
-	v = apic_read(APIC_LVT1);
-	apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
-	if (maxlvt >= 4) {
-		v = apic_read(APIC_LVTPC);
-		apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
-	}
-
-	/*
-	 * Clean APIC state for other OSs:
-	 */
-	apic_write(APIC_LVTT, APIC_LVT_MASKED);
-	apic_write(APIC_LVT0, APIC_LVT_MASKED);
-	apic_write(APIC_LVT1, APIC_LVT_MASKED);
-	if (maxlvt >= 3)
-		apic_write(APIC_LVTERR, APIC_LVT_MASKED);
-	if (maxlvt >= 4)
-		apic_write(APIC_LVTPC, APIC_LVT_MASKED);
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-}
-
-/**
- * disable_local_APIC - clear and disable the local APIC
- */
-void disable_local_APIC(void)
-{
-	unsigned int value;
-
-	clear_local_APIC();
-
-	/*
-	 * Disable APIC (implies clearing of registers
-	 * for 82489DX!).
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_SPIV_APIC_ENABLED;
-	apic_write(APIC_SPIV, value);
-}
-
-void lapic_shutdown(void)
-{
-	unsigned long flags;
-
-	if (!cpu_has_apic)
-		return;
-
-	local_irq_save(flags);
-
-	disable_local_APIC();
-
-	local_irq_restore(flags);
-}
-
-/*
- * This is to verify that we're looking at a real local APIC.
- * Check these against your board if the CPUs aren't getting
- * started for no apparent reason.
- */
-int __init verify_local_APIC(void)
-{
-	unsigned int reg0, reg1;
-
-	/*
-	 * The version register is read-only in a real APIC.
-	 */
-	reg0 = apic_read(APIC_LVR);
-	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
-	apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
-	reg1 = apic_read(APIC_LVR);
-	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
-
-	/*
-	 * The two version reads above should print the same
-	 * numbers.  If the second one is different, then we
-	 * poke at a non-APIC.
-	 */
-	if (reg1 != reg0)
-		return 0;
-
-	/*
-	 * Check if the version looks reasonably.
-	 */
-	reg1 = GET_APIC_VERSION(reg0);
-	if (reg1 == 0x00 || reg1 == 0xff)
-		return 0;
-	reg1 = lapic_get_maxlvt();
-	if (reg1 < 0x02 || reg1 == 0xff)
-		return 0;
-
-	/*
-	 * The ID register is read/write in a real APIC.
-	 */
-	reg0 = read_apic_id();
-	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
-	apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
-	reg1 = read_apic_id();
-	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
-	apic_write(APIC_ID, reg0);
-	if (reg1 != (reg0 ^ APIC_ID_MASK))
-		return 0;
-
-	/*
-	 * The next two are just to see if we have sane values.
-	 * They're only really relevant if we're in Virtual Wire
-	 * compatibility mode, but most boxes are anymore.
-	 */
-	reg0 = apic_read(APIC_LVT0);
-	apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
-	reg1 = apic_read(APIC_LVT1);
-	apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
-
-	return 1;
-}
-
-/**
- * sync_Arb_IDs - synchronize APIC bus arbitration IDs
- */
-void __init sync_Arb_IDs(void)
-{
-	/* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
-	if (modern_apic())
-		return;
-
-	/*
-	 * Wait for idle.
-	 */
-	apic_wait_icr_idle();
-
-	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
-	apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
-				| APIC_DM_INIT);
-}
-
-/*
- * An initial setup of the virtual wire mode.
- */
-void __init init_bsp_APIC(void)
-{
-	unsigned int value;
-
-	/*
-	 * Don't do the setup now if we have a SMP BIOS as the
-	 * through-I/O-APIC virtual wire mode might be active.
-	 */
-	if (smp_found_config || !cpu_has_apic)
-		return;
-
-	value = apic_read(APIC_LVR);
-
-	/*
-	 * Do not trust the local APIC being empty at bootup.
-	 */
-	clear_local_APIC();
-
-	/*
-	 * Enable APIC.
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	value |= APIC_SPIV_APIC_ENABLED;
-	value |= APIC_SPIV_FOCUS_DISABLED;
-	value |= SPURIOUS_APIC_VECTOR;
-	apic_write(APIC_SPIV, value);
-
-	/*
-	 * Set up the virtual wire mode.
-	 */
-	apic_write(APIC_LVT0, APIC_DM_EXTINT);
-	value = APIC_DM_NMI;
-	apic_write(APIC_LVT1, value);
-}
-
-/**
- * setup_local_APIC - setup the local APIC
- */
-void __cpuinit setup_local_APIC(void)
-{
-	unsigned int value;
-	int i, j;
-
-	preempt_disable();
-	value = apic_read(APIC_LVR);
-
-	BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f);
-
-	/*
-	 * Double-check whether this APIC is really registered.
-	 * This is meaningless in clustered apic mode, so we skip it.
-	 */
-	if (!apic_id_registered())
-		BUG();
-
-	/*
-	 * Intel recommends to set DFR, LDR and TPR before enabling
-	 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
-	 * document number 292116).  So here it goes...
-	 */
-	init_apic_ldr();
-
-	/*
-	 * Set Task Priority to 'accept all'. We never change this
-	 * later on.
-	 */
-	value = apic_read(APIC_TASKPRI);
-	value &= ~APIC_TPRI_MASK;
-	apic_write(APIC_TASKPRI, value);
-
-	/*
-	 * After a crash, we no longer service the interrupts and a pending
-	 * interrupt from previous kernel might still have ISR bit set.
-	 *
-	 * Most probably by now CPU has serviced that pending interrupt and
-	 * it might not have done the ack_APIC_irq() because it thought,
-	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
-	 * does not clear the ISR bit and cpu thinks it has already serivced
-	 * the interrupt. Hence a vector might get locked. It was noticed
-	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
-	 */
-	for (i = APIC_ISR_NR - 1; i >= 0; i--) {
-		value = apic_read(APIC_ISR + i*0x10);
-		for (j = 31; j >= 0; j--) {
-			if (value & (1<<j))
-				ack_APIC_irq();
-		}
-	}
-
-	/*
-	 * Now that we are all set up, enable the APIC
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	/*
-	 * Enable APIC
-	 */
-	value |= APIC_SPIV_APIC_ENABLED;
-
-	/* We always use processor focus */
-
-	/*
-	 * Set spurious IRQ vector
-	 */
-	value |= SPURIOUS_APIC_VECTOR;
-	apic_write(APIC_SPIV, value);
-
-	/*
-	 * Set up LVT0, LVT1:
-	 *
-	 * set up through-local-APIC on the BP's LINT0. This is not
-	 * strictly necessary in pure symmetric-IO mode, but sometimes
-	 * we delegate interrupts to the 8259A.
-	 */
-	/*
-	 * TODO: set up through-local-APIC from through-I/O-APIC? --macro
-	 */
-	value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
-	if (!smp_processor_id() && !value) {
-		value = APIC_DM_EXTINT;
-		apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
-			    smp_processor_id());
-	} else {
-		value = APIC_DM_EXTINT | APIC_LVT_MASKED;
-		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
-			    smp_processor_id());
-	}
-	apic_write(APIC_LVT0, value);
-
-	/*
-	 * only the BP should see the LINT1 NMI signal, obviously.
-	 */
-	if (!smp_processor_id())
-		value = APIC_DM_NMI;
-	else
-		value = APIC_DM_NMI | APIC_LVT_MASKED;
-	apic_write(APIC_LVT1, value);
-	preempt_enable();
-}
-
-static void __cpuinit lapic_setup_esr(void)
-{
-	unsigned maxlvt = lapic_get_maxlvt();
-
-	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR);
-	/*
-	 * spec says clear errors after enabling vector.
-	 */
-	if (maxlvt > 3)
-		apic_write(APIC_ESR, 0);
-}
-
-void __cpuinit end_local_APIC_setup(void)
-{
-	lapic_setup_esr();
-	setup_apic_nmi_watchdog(NULL);
-	apic_pm_activate();
-}
-
-/*
- * Detect and enable local APICs on non-SMP boards.
- * Original code written by Keir Fraser.
- * On AMD64 we trust the BIOS - if it says no APIC it is likely
- * not correctly set up (usually the APIC timer won't work etc.)
- */
-static int __init detect_init_APIC(void)
-{
-	if (!cpu_has_apic) {
-		printk(KERN_INFO "No local APIC present\n");
-		return -1;
-	}
-
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-	boot_cpu_physical_apicid = 0;
-	return 0;
-}
-
-void __init early_init_lapic_mapping(void)
-{
-	unsigned long phys_addr;
-
-	/*
-	 * If no local APIC can be found then go out
-	 * : it means there is no mpatable and MADT
-	 */
-	if (!smp_found_config)
-		return;
-
-	phys_addr = mp_lapic_addr;
-
-	set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
-	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-		    APIC_BASE, phys_addr);
-
-	/*
-	 * Fetch the APIC ID of the BSP in case we have a
-	 * default configuration (or the MP table is broken).
-	 */
-	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
-}
-
-/**
- * init_apic_mappings - initialize APIC mappings
- */
-void __init init_apic_mappings(void)
-{
-	/*
-	 * If no local APIC can be found then set up a fake all
-	 * zeroes page to simulate the local APIC and another
-	 * one for the IO-APIC.
-	 */
-	if (!smp_found_config && detect_init_APIC()) {
-		apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
-		apic_phys = __pa(apic_phys);
-	} else
-		apic_phys = mp_lapic_addr;
-
-	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
-	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-				APIC_BASE, apic_phys);
-
-	/*
-	 * Fetch the APIC ID of the BSP in case we have a
-	 * default configuration (or the MP table is broken).
-	 */
-	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
-}
-
-/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
- */
-int __init APIC_init_uniprocessor(void)
-{
-	if (disable_apic) {
-		printk(KERN_INFO "Apic disabled\n");
-		return -1;
-	}
-	if (!cpu_has_apic) {
-		disable_apic = 1;
-		printk(KERN_INFO "Apic disabled by BIOS\n");
-		return -1;
-	}
-
-	verify_local_APIC();
-
-	connect_bsp_APIC();
-
-	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
-	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
-
-	setup_local_APIC();
-
-	/*
-	 * Now enable IO-APICs, actually call clear_IO_APIC
-	 * We need clear_IO_APIC before enabling vector on BP
-	 */
-	if (!skip_ioapic_setup && nr_ioapics)
-		enable_IO_APIC();
-
-	if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
-		localise_nmi_watchdog();
-	end_local_APIC_setup();
-
-	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
-		setup_IO_APIC();
-	else
-		nr_ioapics = 0;
-	setup_boot_APIC_clock();
-	check_nmi_watchdog();
-	return 0;
-}
-
-/*
- * Local APIC interrupts
- */
-
-/*
- * This interrupt should _never_ happen with our APIC/SMP architecture
- */
-asmlinkage void smp_spurious_interrupt(void)
-{
-	unsigned int v;
-	exit_idle();
-	irq_enter();
-	/*
-	 * Check if this really is a spurious interrupt and ACK it
-	 * if it is a vectored one.  Just in case...
-	 * Spurious interrupts should not be ACKed.
-	 */
-	v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
-	if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
-		ack_APIC_irq();
-
-	add_pda(irq_spurious_count, 1);
-	irq_exit();
-}
-
-/*
- * This interrupt should never happen with our APIC/SMP architecture
- */
-asmlinkage void smp_error_interrupt(void)
-{
-	unsigned int v, v1;
-
-	exit_idle();
-	irq_enter();
-	/* First tickle the hardware, only then report what went on. -- REW */
-	v = apic_read(APIC_ESR);
-	apic_write(APIC_ESR, 0);
-	v1 = apic_read(APIC_ESR);
-	ack_APIC_irq();
-	atomic_inc(&irq_err_count);
-
-	/* Here is what the APIC error bits mean:
-	   0: Send CS error
-	   1: Receive CS error
-	   2: Send accept error
-	   3: Receive accept error
-	   4: Reserved
-	   5: Send illegal vector
-	   6: Received illegal vector
-	   7: Illegal register address
-	*/
-	printk(KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n",
-		smp_processor_id(), v , v1);
-	irq_exit();
-}
-
-/**
- *  * connect_bsp_APIC - attach the APIC to the interrupt system
- *   */
-void __init connect_bsp_APIC(void)
-{
-	enable_apic_mode();
-}
-
-void disconnect_bsp_APIC(int virt_wire_setup)
-{
-	/* Go back to Virtual Wire compatibility mode */
-	unsigned long value;
-
-	/* For the spurious interrupt use vector F, and enable it */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	value |= APIC_SPIV_APIC_ENABLED;
-	value |= 0xf;
-	apic_write(APIC_SPIV, value);
-
-	if (!virt_wire_setup) {
-		/*
-		 * For LVT0 make it edge triggered, active high,
-		 * external and enabled
-		 */
-		value = apic_read(APIC_LVT0);
-		value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
-			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
-		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
-		apic_write(APIC_LVT0, value);
-	} else {
-		/* Disable LVT0 */
-		apic_write(APIC_LVT0, APIC_LVT_MASKED);
-	}
-
-	/* For LVT1 make it edge triggered, active high, nmi and enabled */
-	value = apic_read(APIC_LVT1);
-	value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
-			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
-	value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-	value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
-	apic_write(APIC_LVT1, value);
-}
-
-void __cpuinit generic_processor_info(int apicid, int version)
-{
-	int cpu;
-	cpumask_t tmp_map;
-
-	if (num_processors >= NR_CPUS) {
-		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
-		       " Processor ignored.\n", NR_CPUS);
-		return;
-	}
-
-	num_processors++;
-	cpus_complement(tmp_map, cpu_present_map);
-	cpu = first_cpu(tmp_map);
-
-	physid_set(apicid, phys_cpu_present_map);
-	if (apicid == boot_cpu_physical_apicid) {
-		/*
-		 * x86_bios_cpu_apicid is required to have processors listed
-		 * in same order as logical cpu numbers. Hence the first
-		 * entry is BSP, and so on.
-		 */
-		cpu = 0;
-	}
-	if (apicid > max_physical_apicid)
-		max_physical_apicid = apicid;
-
-	/* are we being called early in kernel startup? */
-	if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
-		u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
-		u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
-
-		cpu_to_apicid[cpu] = apicid;
-		bios_cpu_apicid[cpu] = apicid;
-	} else {
-		per_cpu(x86_cpu_to_apicid, cpu) = apicid;
-		per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
-	}
-
-	cpu_set(cpu, cpu_possible_map);
-	cpu_set(cpu, cpu_present_map);
-}
-
-/*
- * Power management
- */
-#ifdef CONFIG_PM
-
-static struct {
-	/* 'active' is true if the local APIC was enabled by us and
-	   not the BIOS; this signifies that we are also responsible
-	   for disabling it before entering apm/acpi suspend */
-	int active;
-	/* r/w apic fields */
-	unsigned int apic_id;
-	unsigned int apic_taskpri;
-	unsigned int apic_ldr;
-	unsigned int apic_dfr;
-	unsigned int apic_spiv;
-	unsigned int apic_lvtt;
-	unsigned int apic_lvtpc;
-	unsigned int apic_lvt0;
-	unsigned int apic_lvt1;
-	unsigned int apic_lvterr;
-	unsigned int apic_tmict;
-	unsigned int apic_tdcr;
-	unsigned int apic_thmr;
-} apic_pm_state;
-
-static int lapic_suspend(struct sys_device *dev, pm_message_t state)
-{
-	unsigned long flags;
-	int maxlvt;
-
-	if (!apic_pm_state.active)
-		return 0;
-
-	maxlvt = lapic_get_maxlvt();
-
-	apic_pm_state.apic_id = read_apic_id();
-	apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
-	apic_pm_state.apic_ldr = apic_read(APIC_LDR);
-	apic_pm_state.apic_dfr = apic_read(APIC_DFR);
-	apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
-	apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
-	if (maxlvt >= 4)
-		apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
-	apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
-	apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
-	apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
-	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
-	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#ifdef CONFIG_X86_MCE_INTEL
-	if (maxlvt >= 5)
-		apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
-#endif
-	local_irq_save(flags);
-	disable_local_APIC();
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int lapic_resume(struct sys_device *dev)
-{
-	unsigned int l, h;
-	unsigned long flags;
-	int maxlvt;
-
-	if (!apic_pm_state.active)
-		return 0;
-
-	maxlvt = lapic_get_maxlvt();
-
-	local_irq_save(flags);
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	l &= ~MSR_IA32_APICBASE_BASE;
-	l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-	wrmsr(MSR_IA32_APICBASE, l, h);
-	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
-	apic_write(APIC_ID, apic_pm_state.apic_id);
-	apic_write(APIC_DFR, apic_pm_state.apic_dfr);
-	apic_write(APIC_LDR, apic_pm_state.apic_ldr);
-	apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
-	apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
-	apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
-	apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#ifdef CONFIG_X86_MCE_INTEL
-	if (maxlvt >= 5)
-		apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
-#endif
-	if (maxlvt >= 4)
-		apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
-	apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
-	apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
-	apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-	apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-	local_irq_restore(flags);
-	return 0;
-}
-
-static struct sysdev_class lapic_sysclass = {
-	.name		= "lapic",
-	.resume		= lapic_resume,
-	.suspend	= lapic_suspend,
-};
-
-static struct sys_device device_lapic = {
-	.id	= 0,
-	.cls	= &lapic_sysclass,
-};
-
-static void __cpuinit apic_pm_activate(void)
-{
-	apic_pm_state.active = 1;
-}
-
-static int __init init_lapic_sysfs(void)
-{
-	int error;
-
-	if (!cpu_has_apic)
-		return 0;
-	/* XXX: remove suspend/resume procs if !apic_pm_state.active? */
-
-	error = sysdev_class_register(&lapic_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic);
-	return error;
-}
-device_initcall(init_lapic_sysfs);
-
-#else	/* CONFIG_PM */
-
-static void apic_pm_activate(void) { }
-
-#endif	/* CONFIG_PM */
-
-/*
- * apic_is_clustered_box() -- Check if we can expect good TSC
- *
- * Thus far, the major user of this is IBM's Summit2 series:
- *
- * Clustered boxes may have unsynced TSC problems if they are
- * multi-chassis. Use available data to take a good guess.
- * If in doubt, go HPET.
- */
-__cpuinit int apic_is_clustered_box(void)
-{
-	int i, clusters, zeros;
-	unsigned id;
-	u16 *bios_cpu_apicid;
-	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
-
-	/*
-	 * there is not this kind of box with AMD CPU yet.
-	 * Some AMD box with quadcore cpu and 8 sockets apicid
-	 * will be [4, 0x23] or [8, 0x27] could be thought to
-	 * vsmp box still need checking...
-	 */
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
-		return 0;
-
-	bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
-	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
-
-	for (i = 0; i < NR_CPUS; i++) {
-		/* are we being called early in kernel startup? */
-		if (bios_cpu_apicid) {
-			id = bios_cpu_apicid[i];
-		}
-		else if (i < nr_cpu_ids) {
-			if (cpu_present(i))
-				id = per_cpu(x86_bios_cpu_apicid, i);
-			else
-				continue;
-		}
-		else
-			break;
-
-		if (id != BAD_APICID)
-			__set_bit(APIC_CLUSTERID(id), clustermap);
-	}
-
-	/* Problem:  Partially populated chassis may not have CPUs in some of
-	 * the APIC clusters they have been allocated.  Only present CPUs have
-	 * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap.
-	 * Since clusters are allocated sequentially, count zeros only if
-	 * they are bounded by ones.
-	 */
-	clusters = 0;
-	zeros = 0;
-	for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
-		if (test_bit(i, clustermap)) {
-			clusters += 1 + zeros;
-			zeros = 0;
-		} else
-			++zeros;
-	}
-
-	/* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
-	 * not guaranteed to be synced between boards
-	 */
-	if (is_vsmp_box() && clusters > 1)
-		return 1;
-
-	/*
-	 * If clusters > 2, then should be multi-chassis.
-	 * May have to revisit this when multi-core + hyperthreaded CPUs come
-	 * out, but AFAIK this will work even for them.
-	 */
-	return (clusters > 2);
-}
-
-/*
- * APIC command line parameters
- */
-static int __init apic_set_verbosity(char *str)
-{
-	if (str == NULL)  {
-		skip_ioapic_setup = 0;
-		ioapic_force = 1;
-		return 0;
-	}
-	if (strcmp("debug", str) == 0)
-		apic_verbosity = APIC_DEBUG;
-	else if (strcmp("verbose", str) == 0)
-		apic_verbosity = APIC_VERBOSE;
-	else {
-		printk(KERN_WARNING "APIC Verbosity level %s not recognised"
-				" use apic=verbose or apic=debug\n", str);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-early_param("apic", apic_set_verbosity);
-
-static __init int setup_disableapic(char *str)
-{
-	disable_apic = 1;
-	setup_clear_cpu_cap(X86_FEATURE_APIC);
-	return 0;
-}
-early_param("disableapic", setup_disableapic);
-
-/* same as disableapic, for compatibility */
-static __init int setup_nolapic(char *str)
-{
-	return setup_disableapic(str);
-}
-early_param("nolapic", setup_nolapic);
-
-static int __init parse_lapic_timer_c2_ok(char *arg)
-{
-	local_apic_timer_c2_ok = 1;
-	return 0;
-}
-early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
-
-static __init int setup_noapictimer(char *str)
-{
-	if (str[0] != ' ' && str[0] != 0)
-		return 0;
-	disable_apic_timer = 1;
-	return 1;
-}
-__setup("noapictimer", setup_noapictimer);
-
-static __init int setup_apicpmtimer(char *s)
-{
-	apic_calibrate_pmtmr = 1;
-	notsc_setup(NULL);
-	return 0;
-}
-__setup("apicpmtimer", setup_apicpmtimer);
-
-static int __init lapic_insert_resource(void)
-{
-	if (!apic_phys)
-		return -1;
-
-	/* Put local APIC into the resource map. */
-	lapic_resource.start = apic_phys;
-	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
-	insert_resource(&iomem_resource, &lapic_resource);
-
-	return 0;
-}
-
-/*
- * need call insert after e820_reserve_resources()
- * that is using request_resource
- */
-late_initcall(lapic_insert_resource);
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 9ee24e6..5145a6e 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -228,12 +228,12 @@
 #include <linux/suspend.h>
 #include <linux/kthread.h>
 #include <linux/jiffies.h>
-#include <linux/smp_lock.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/desc.h>
 #include <asm/i8253.h>
+#include <asm/olpc.h>
 #include <asm/paravirt.h>
 #include <asm/reboot.h>
 
@@ -2217,7 +2217,7 @@ static int __init apm_init(void)
 
 	dmi_check_system(apm_dmi_table);
 
-	if (apm_info.bios.version == 0 || paravirt_enabled()) {
+	if (apm_info.bios.version == 0 || paravirt_enabled() || machine_is_olpc()) {
 		printk(KERN_INFO "apm: BIOS not found.\n");
 		return -ENODEV;
 	}
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index aa89387..7fcf63d 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -22,7 +22,7 @@
 
 #define __NO_STUBS 1
 #undef __SYSCALL
-#undef _ASM_X86_64_UNISTD_H_
+#undef _ASM_X86_UNISTD_64_H
 #define __SYSCALL(nr, sym) [nr] = 1,
 static char syscalls[] = {
 #include <asm/unistd.h>
diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c
index c639bd5..f0dfe6f 100644
--- a/arch/x86/kernel/bios_uv.c
+++ b/arch/x86/kernel/bios_uv.c
@@ -1,8 +1,6 @@
 /*
  * BIOS run time interface routines.
  *
- *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
- *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License, or
@@ -16,33 +14,128 @@
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *  Copyright (c) Russ Anderson
  */
 
+#include <linux/efi.h>
+#include <asm/efi.h>
+#include <linux/io.h>
 #include <asm/uv/bios.h>
+#include <asm/uv/uv_hub.h>
+
+struct uv_systab uv_systab;
 
-const char *
-x86_bios_strerror(long status)
+s64 uv_bios_call(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3, u64 a4, u64 a5)
 {
-	const char *str;
-	switch (status) {
-	case  0: str = "Call completed without error"; break;
-	case -1: str = "Not implemented"; break;
-	case -2: str = "Invalid argument"; break;
-	case -3: str = "Call completed with error"; break;
-	default: str = "Unknown BIOS status code"; break;
-	}
-	return str;
+	struct uv_systab *tab = &uv_systab;
+
+	if (!tab->function)
+		/*
+		 * BIOS does not support UV systab
+		 */
+		return BIOS_STATUS_UNIMPLEMENTED;
+
+	return efi_call6((void *)__va(tab->function),
+					(u64)which, a1, a2, a3, a4, a5);
 }
 
-long
-x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
-		   unsigned long *drift_info)
+s64 uv_bios_call_irqsave(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3,
+					u64 a4, u64 a5)
 {
-	struct uv_bios_retval isrv;
+	unsigned long bios_flags;
+	s64 ret;
 
-	BIOS_CALL(isrv, BIOS_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
-	*ticks_per_second = isrv.v0;
-	*drift_info = isrv.v1;
-	return isrv.status;
+	local_irq_save(bios_flags);
+	ret = uv_bios_call(which, a1, a2, a3, a4, a5);
+	local_irq_restore(bios_flags);
+
+	return ret;
 }
-EXPORT_SYMBOL_GPL(x86_bios_freq_base);
+
+s64 uv_bios_call_reentrant(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3,
+					u64 a4, u64 a5)
+{
+	s64 ret;
+
+	preempt_disable();
+	ret = uv_bios_call(which, a1, a2, a3, a4, a5);
+	preempt_enable();
+
+	return ret;
+}
+
+
+long sn_partition_id;
+EXPORT_SYMBOL_GPL(sn_partition_id);
+long uv_coherency_id;
+EXPORT_SYMBOL_GPL(uv_coherency_id);
+long uv_region_size;
+EXPORT_SYMBOL_GPL(uv_region_size);
+int uv_type;
+
+
+s64 uv_bios_get_sn_info(int fc, int *uvtype, long *partid, long *coher,
+		long *region)
+{
+	s64 ret;
+	u64 v0, v1;
+	union partition_info_u part;
+
+	ret = uv_bios_call_irqsave(UV_BIOS_GET_SN_INFO, fc,
+				(u64)(&v0), (u64)(&v1), 0, 0);
+	if (ret != BIOS_STATUS_SUCCESS)
+		return ret;
+
+	part.val = v0;
+	if (uvtype)
+		*uvtype = part.hub_version;
+	if (partid)
+		*partid = part.partition_id;
+	if (coher)
+		*coher = part.coherence_id;
+	if (region)
+		*region = part.region_size;
+	return ret;
+}
+
+
+s64 uv_bios_freq_base(u64 clock_type, u64 *ticks_per_second)
+{
+	return uv_bios_call(UV_BIOS_FREQ_BASE, clock_type,
+			   (u64)ticks_per_second, 0, 0, 0);
+}
+EXPORT_SYMBOL_GPL(uv_bios_freq_base);
+
+
+#ifdef CONFIG_EFI
+void uv_bios_init(void)
+{
+	struct uv_systab *tab;
+
+	if ((efi.uv_systab == EFI_INVALID_TABLE_ADDR) ||
+	    (efi.uv_systab == (unsigned long)NULL)) {
+		printk(KERN_CRIT "No EFI UV System Table.\n");
+		uv_systab.function = (unsigned long)NULL;
+		return;
+	}
+
+	tab = (struct uv_systab *)ioremap(efi.uv_systab,
+					sizeof(struct uv_systab));
+	if (strncmp(tab->signature, "UVST", 4) != 0)
+		printk(KERN_ERR "bad signature in UV system table!");
+
+	/*
+	 * Copy table to permanent spot for later use.
+	 */
+	memcpy(&uv_systab, tab, sizeof(struct uv_systab));
+	iounmap(tab);
+
+	printk(KERN_INFO "EFI UV System Table Revision %d\n", tab->revision);
+}
+#else	/* !CONFIG_EFI */
+
+void uv_bios_init(void) { }
+#endif
+
diff --git a/arch/x86/kernel/cpu/.gitignore b/arch/x86/kernel/cpu/.gitignore
new file mode 100644
index 0000000..667df55
--- /dev/null
+++ b/arch/x86/kernel/cpu/.gitignore
@@ -0,0 +1 @@
+capflags.c
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index ee76eaa..82ec607 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -3,22 +3,30 @@
 #
 
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
-obj-y			+= proc.o feature_names.o
-
-obj-$(CONFIG_X86_32)	+= common.o bugs.o
-obj-$(CONFIG_X86_64)	+= common_64.o bugs_64.o
-obj-$(CONFIG_X86_32)	+= amd.o
-obj-$(CONFIG_X86_64)	+= amd_64.o
-obj-$(CONFIG_X86_32)	+= cyrix.o
-obj-$(CONFIG_X86_32)	+= centaur.o
-obj-$(CONFIG_X86_64)	+= centaur_64.o
-obj-$(CONFIG_X86_32)	+= transmeta.o
-obj-$(CONFIG_X86_32)	+= intel.o
-obj-$(CONFIG_X86_64)	+= intel_64.o
-obj-$(CONFIG_X86_32)	+= umc.o
+obj-y			+= proc.o capflags.o powerflags.o common.o
+
+obj-$(CONFIG_X86_32)	+= bugs.o cmpxchg.o
+obj-$(CONFIG_X86_64)	+= bugs_64.o
+
+obj-$(CONFIG_CPU_SUP_INTEL)		+= intel.o
+obj-$(CONFIG_CPU_SUP_AMD)		+= amd.o
+obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix.o
+obj-$(CONFIG_CPU_SUP_CENTAUR_32)	+= centaur.o
+obj-$(CONFIG_CPU_SUP_CENTAUR_64)	+= centaur_64.o
+obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
+obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
 
 obj-$(CONFIG_X86_MCE)	+= mcheck/
 obj-$(CONFIG_MTRR)	+= mtrr/
 obj-$(CONFIG_CPU_FREQ)	+= cpufreq/
 
 obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o
+
+quiet_cmd_mkcapflags = MKCAP   $@
+      cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@
+
+cpufeature = $(src)/../../include/asm/cpufeature.h
+
+targets += capflags.c
+$(obj)/capflags.c: $(cpufeature) $(src)/mkcapflags.pl FORCE
+	$(call if_changed,mkcapflags)
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index a6ef672..0d9c993 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -7,6 +7,8 @@
 #include <asm/pat.h>
 #include <asm/processor.h>
 
+#include <mach_apic.h>
+
 struct cpuid_bit {
 	u16 feature;
 	u8 reg;
@@ -48,6 +50,92 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 	}
 }
 
+/* leaf 0xb SMT level */
+#define SMT_LEVEL	0
+
+/* leaf 0xb sub-leaf types */
+#define INVALID_TYPE	0
+#define SMT_TYPE	1
+#define CORE_TYPE	2
+
+#define LEAFB_SUBTYPE(ecx)		(((ecx) >> 8) & 0xff)
+#define BITS_SHIFT_NEXT_LEVEL(eax)	((eax) & 0x1f)
+#define LEVEL_MAX_SIBLINGS(ebx)		((ebx) & 0xffff)
+
+/*
+ * Check for extended topology enumeration cpuid leaf 0xb and if it
+ * exists, use it for populating initial_apicid and cpu topology
+ * detection.
+ */
+void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+	unsigned int eax, ebx, ecx, edx, sub_index;
+	unsigned int ht_mask_width, core_plus_mask_width;
+	unsigned int core_select_mask, core_level_siblings;
+
+	if (c->cpuid_level < 0xb)
+		return;
+
+	cpuid_count(0xb, SMT_LEVEL, &eax, &ebx, &ecx, &edx);
+
+	/*
+	 * check if the cpuid leaf 0xb is actually implemented.
+	 */
+	if (ebx == 0 || (LEAFB_SUBTYPE(ecx) != SMT_TYPE))
+		return;
+
+	set_cpu_cap(c, X86_FEATURE_XTOPOLOGY);
+
+	/*
+	 * initial apic id, which also represents 32-bit extended x2apic id.
+	 */
+	c->initial_apicid = edx;
+
+	/*
+	 * Populate HT related information from sub-leaf level 0.
+	 */
+	core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx);
+	core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
+
+	sub_index = 1;
+	do {
+		cpuid_count(0xb, sub_index, &eax, &ebx, &ecx, &edx);
+
+		/*
+		 * Check for the Core type in the implemented sub leaves.
+		 */
+		if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) {
+			core_level_siblings = LEVEL_MAX_SIBLINGS(ebx);
+			core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
+			break;
+		}
+
+		sub_index++;
+	} while (LEAFB_SUBTYPE(ecx) != INVALID_TYPE);
+
+	core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width;
+
+#ifdef CONFIG_X86_32
+	c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width)
+						 & core_select_mask;
+	c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width);
+#else
+	c->cpu_core_id = phys_pkg_id(ht_mask_width) & core_select_mask;
+	c->phys_proc_id = phys_pkg_id(core_plus_mask_width);
+#endif
+	c->x86_max_cores = (core_level_siblings / smp_num_siblings);
+
+
+	printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+	       c->phys_proc_id);
+	if (c->x86_max_cores > 1)
+		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
+		       c->cpu_core_id);
+	return;
+#endif
+}
+
 #ifdef CONFIG_X86_PAT
 void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
 {
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 18514ed..8f1e31d 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -1,13 +1,22 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/mm.h>
+
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/apic.h>
 
+#ifdef CONFIG_X86_64
+# include <asm/numa_64.h>
+# include <asm/mmconfig.h>
+# include <asm/cacheflush.h>
+#endif
+
 #include <mach_apic.h>
+
 #include "cpu.h"
 
+#ifdef CONFIG_X86_32
 /*
  *	B step AMD K6 before B 9730xxxx have hardware bugs that can cause
  *	misexecution of code under Linux. Owners of such processors should
@@ -24,26 +33,273 @@
 extern void vide(void);
 __asm__(".align 4\nvide: ret");
 
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c)
 {
-	if (cpuid_eax(0x80000000) >= 0x80000007) {
-		c->x86_power = cpuid_edx(0x80000007);
-		if (c->x86_power & (1<<8))
-			set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+/*
+ * General Systems BIOSen alias the cpu frequency registers
+ * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+ * drivers subsequently pokes it, and changes the CPU speed.
+ * Workaround : Remove the unneeded alias.
+ */
+#define CBAR		(0xfffc) /* Configuration Base Address  (32-bit) */
+#define CBAR_ENB	(0x80000000)
+#define CBAR_KEY	(0X000000CB)
+	if (c->x86_model == 9 || c->x86_model == 10) {
+		if (inl (CBAR) & CBAR_ENB)
+			outl (0 | CBAR_KEY, CBAR);
 	}
-
-	/*  Set MTRR capability flag if appropriate */
-	if (c->x86_model == 13 || c->x86_model == 9 ||
-	   (c->x86_model == 8 && c->x86_mask >= 8))
-		set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 }
 
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
+
+static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int mbytes = num_physpages >> (20-PAGE_SHIFT);
-	int r;
 
+	if (c->x86_model < 6) {
+		/* Based on AMD doc 20734R - June 2000 */
+		if (c->x86_model == 0) {
+			clear_cpu_cap(c, X86_FEATURE_APIC);
+			set_cpu_cap(c, X86_FEATURE_PGE);
+		}
+		return;
+	}
+
+	if (c->x86_model == 6 && c->x86_mask == 1) {
+		const int K6_BUG_LOOP = 1000000;
+		int n;
+		void (*f_vide)(void);
+		unsigned long d, d2;
+
+		printk(KERN_INFO "AMD K6 stepping B detected - ");
+
+		/*
+		 * It looks like AMD fixed the 2.6.2 bug and improved indirect
+		 * calls at the same time.
+		 */
+
+		n = K6_BUG_LOOP;
+		f_vide = vide;
+		rdtscl(d);
+		while (n--)
+			f_vide();
+		rdtscl(d2);
+		d = d2-d;
+
+		if (d > 20*K6_BUG_LOOP)
+			printk("system stability may be impaired when more than 32 MB are used.\n");
+		else
+			printk("probably OK (after B9730xxxx).\n");
+		printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
+	}
+
+	/* K6 with old style WHCR */
+	if (c->x86_model < 8 ||
+	   (c->x86_model == 8 && c->x86_mask < 8)) {
+		/* We can only write allocate on the low 508Mb */
+		if (mbytes > 508)
+			mbytes = 508;
+
+		rdmsr(MSR_K6_WHCR, l, h);
+		if ((l&0x0000FFFF) == 0) {
+			unsigned long flags;
+			l = (1<<0)|((mbytes/4)<<1);
+			local_irq_save(flags);
+			wbinvd();
+			wrmsr(MSR_K6_WHCR, l, h);
+			local_irq_restore(flags);
+			printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
+				mbytes);
+		}
+		return;
+	}
+
+	if ((c->x86_model == 8 && c->x86_mask > 7) ||
+	     c->x86_model == 9 || c->x86_model == 13) {
+		/* The more serious chips .. */
+
+		if (mbytes > 4092)
+			mbytes = 4092;
+
+		rdmsr(MSR_K6_WHCR, l, h);
+		if ((l&0xFFFF0000) == 0) {
+			unsigned long flags;
+			l = ((mbytes>>2)<<22)|(1<<16);
+			local_irq_save(flags);
+			wbinvd();
+			wrmsr(MSR_K6_WHCR, l, h);
+			local_irq_restore(flags);
+			printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
+				mbytes);
+		}
+
+		return;
+	}
+
+	if (c->x86_model == 10) {
+		/* AMD Geode LX is model 10 */
+		/* placeholder for any needed mods */
+		return;
+	}
+}
+
+static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+
+	/*
+	 * Bit 15 of Athlon specific MSR 15, needs to be 0
+	 * to enable SSE on Palomino/Morgan/Barton CPU's.
+	 * If the BIOS didn't enable it already, enable it here.
+	 */
+	if (c->x86_model >= 6 && c->x86_model <= 10) {
+		if (!cpu_has(c, X86_FEATURE_XMM)) {
+			printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
+			rdmsr(MSR_K7_HWCR, l, h);
+			l &= ~0x00008000;
+			wrmsr(MSR_K7_HWCR, l, h);
+			set_cpu_cap(c, X86_FEATURE_XMM);
+		}
+	}
+
+	/*
+	 * It's been determined by AMD that Athlons since model 8 stepping 1
+	 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
+	 * As per AMD technical note 27212 0.2
+	 */
+	if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
+		rdmsr(MSR_K7_CLK_CTL, l, h);
+		if ((l & 0xfff00000) != 0x20000000) {
+			printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
+				((l & 0x000fffff)|0x20000000));
+			wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
+		}
+	}
+
+	set_cpu_cap(c, X86_FEATURE_K7);
+}
+#endif
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+static int __cpuinit nearby_node(int apicid)
+{
+	int i, node;
+
+	for (i = apicid - 1; i >= 0; i--) {
+		node = apicid_to_node[i];
+		if (node != NUMA_NO_NODE && node_online(node))
+			return node;
+	}
+	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
+		node = apicid_to_node[i];
+		if (node != NUMA_NO_NODE && node_online(node))
+			return node;
+	}
+	return first_node(node_online_map); /* Shouldn't happen */
+}
+#endif
+
+/*
+ * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
+ * Assumes number of cores is a power of two.
+ */
+static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_HT
+	unsigned bits;
+
+	bits = c->x86_coreid_bits;
+
+	/* Low order bits define the core id (index of core in socket) */
+	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
+	/* Convert the initial APIC ID into the socket ID */
+	c->phys_proc_id = c->initial_apicid >> bits;
+#endif
+}
+
+static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
+{
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+	int cpu = smp_processor_id();
+	int node;
+	unsigned apicid = hard_smp_processor_id();
+
+	node = c->phys_proc_id;
+	if (apicid_to_node[apicid] != NUMA_NO_NODE)
+		node = apicid_to_node[apicid];
+	if (!node_online(node)) {
+		/* Two possibilities here:
+		   - The CPU is missing memory and no node was created.
+		   In that case try picking one from a nearby CPU
+		   - The APIC IDs differ from the HyperTransport node IDs
+		   which the K8 northbridge parsing fills in.
+		   Assume they are all increased by a constant offset,
+		   but in the same order as the HT nodeids.
+		   If that doesn't result in a usable node fall back to the
+		   path for the previous case.  */
+
+		int ht_nodeid = c->initial_apicid;
+
+		if (ht_nodeid >= 0 &&
+		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+			node = apicid_to_node[ht_nodeid];
+		/* Pick a nearby node */
+		if (!node_online(node))
+			node = nearby_node(apicid);
+	}
+	numa_set_node(cpu, node);
+
+	printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
+#endif
+}
+
+static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_HT
+	unsigned bits, ecx;
+
+	/* Multi core CPU? */
+	if (c->extended_cpuid_level < 0x80000008)
+		return;
+
+	ecx = cpuid_ecx(0x80000008);
+
+	c->x86_max_cores = (ecx & 0xff) + 1;
+
+	/* CPU telling us the core id bits shift? */
+	bits = (ecx >> 12) & 0xF;
+
+	/* Otherwise recompute */
+	if (bits == 0) {
+		while ((1 << bits) < c->x86_max_cores)
+			bits++;
+	}
+
+	c->x86_coreid_bits = bits;
+#endif
+}
+
+static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+{
+	early_init_amd_mc(c);
+
+	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
+	if (c->x86_power & (1<<8))
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+#ifdef CONFIG_X86_64
+	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
+#else
+	/*  Set MTRR capability flag if appropriate */
+	if (c->x86 == 5)
+		if (c->x86_model == 13 || c->x86_model == 9 ||
+		    (c->x86_model == 8 && c->x86_mask >= 8))
+			set_cpu_cap(c, X86_FEATURE_K6_MTRR);
+#endif
+}
+
+static void __cpuinit init_amd(struct cpuinfo_x86 *c)
+{
 #ifdef CONFIG_SMP
 	unsigned long long value;
 
@@ -54,7 +310,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	 * Errata 63 for SH-B3 steppings
 	 * Errata 122 for all steppings (F+ have it disabled by default)
 	 */
-	if (c->x86 == 15) {
+	if (c->x86 == 0xf) {
 		rdmsrl(MSR_K7_HWCR, value);
 		value |= 1 << 6;
 		wrmsrl(MSR_K7_HWCR, value);
@@ -64,209 +320,119 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	early_init_amd(c);
 
 	/*
-	 *	FIXME: We should handle the K5 here. Set up the write
-	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
-	 *	no bus pipeline)
-	 */
-
-	/*
 	 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
 	 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
 	 */
 	clear_cpu_cap(c, 0*32+31);
 
-	r = get_model_name(c);
+#ifdef CONFIG_X86_64
+	/* On C+ stepping K8 rep microcode works well for copy/memset */
+	if (c->x86 == 0xf) {
+		u32 level;
 
-	switch (c->x86) {
-	case 4:
-		/*
-		 * General Systems BIOSen alias the cpu frequency registers
-		 * of the Elan at 0x000df000. Unfortuantly, one of the Linux
-		 * drivers subsequently pokes it, and changes the CPU speed.
-		 * Workaround : Remove the unneeded alias.
-		 */
-#define CBAR		(0xfffc) /* Configuration Base Address  (32-bit) */
-#define CBAR_ENB	(0x80000000)
-#define CBAR_KEY	(0X000000CB)
-			if (c->x86_model == 9 || c->x86_model == 10) {
-				if (inl (CBAR) & CBAR_ENB)
-					outl (0 | CBAR_KEY, CBAR);
-			}
-			break;
-	case 5:
-			if (c->x86_model < 6) {
-				/* Based on AMD doc 20734R - June 2000 */
-				if (c->x86_model == 0) {
-					clear_cpu_cap(c, X86_FEATURE_APIC);
-					set_cpu_cap(c, X86_FEATURE_PGE);
-				}
-				break;
-			}
-
-			if (c->x86_model == 6 && c->x86_mask == 1) {
-				const int K6_BUG_LOOP = 1000000;
-				int n;
-				void (*f_vide)(void);
-				unsigned long d, d2;
-
-				printk(KERN_INFO "AMD K6 stepping B detected - ");
-
-				/*
-				 * It looks like AMD fixed the 2.6.2 bug and improved indirect
-				 * calls at the same time.
-				 */
-
-				n = K6_BUG_LOOP;
-				f_vide = vide;
-				rdtscl(d);
-				while (n--)
-					f_vide();
-				rdtscl(d2);
-				d = d2-d;
-
-				if (d > 20*K6_BUG_LOOP)
-					printk("system stability may be impaired when more than 32 MB are used.\n");
-				else
-					printk("probably OK (after B9730xxxx).\n");
-				printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
-			}
-
-			/* K6 with old style WHCR */
-			if (c->x86_model < 8 ||
-			   (c->x86_model == 8 && c->x86_mask < 8)) {
-				/* We can only write allocate on the low 508Mb */
-				if (mbytes > 508)
-					mbytes = 508;
-
-				rdmsr(MSR_K6_WHCR, l, h);
-				if ((l&0x0000FFFF) == 0) {
-					unsigned long flags;
-					l = (1<<0)|((mbytes/4)<<1);
-					local_irq_save(flags);
-					wbinvd();
-					wrmsr(MSR_K6_WHCR, l, h);
-					local_irq_restore(flags);
-					printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
-						mbytes);
-				}
-				break;
-			}
-
-			if ((c->x86_model == 8 && c->x86_mask > 7) ||
-			     c->x86_model == 9 || c->x86_model == 13) {
-				/* The more serious chips .. */
-
-				if (mbytes > 4092)
-					mbytes = 4092;
-
-				rdmsr(MSR_K6_WHCR, l, h);
-				if ((l&0xFFFF0000) == 0) {
-					unsigned long flags;
-					l = ((mbytes>>2)<<22)|(1<<16);
-					local_irq_save(flags);
-					wbinvd();
-					wrmsr(MSR_K6_WHCR, l, h);
-					local_irq_restore(flags);
-					printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
-						mbytes);
-				}
-
-				break;
-			}
-
-			if (c->x86_model == 10) {
-				/* AMD Geode LX is model 10 */
-				/* placeholder for any needed mods */
-				break;
-			}
-			break;
-	case 6: /* An Athlon/Duron */
-
-			/*
-			 * Bit 15 of Athlon specific MSR 15, needs to be 0
-			 * to enable SSE on Palomino/Morgan/Barton CPU's.
-			 * If the BIOS didn't enable it already, enable it here.
-			 */
-			if (c->x86_model >= 6 && c->x86_model <= 10) {
-				if (!cpu_has(c, X86_FEATURE_XMM)) {
-					printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
-					rdmsr(MSR_K7_HWCR, l, h);
-					l &= ~0x00008000;
-					wrmsr(MSR_K7_HWCR, l, h);
-					set_cpu_cap(c, X86_FEATURE_XMM);
-				}
-			}
-
-			/*
-			 * It's been determined by AMD that Athlons since model 8 stepping 1
-			 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
-			 * As per AMD technical note 27212 0.2
-			 */
-			if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
-				rdmsr(MSR_K7_CLK_CTL, l, h);
-				if ((l & 0xfff00000) != 0x20000000) {
-					printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
-						((l & 0x000fffff)|0x20000000));
-					wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
-				}
-			}
-			break;
+		level = cpuid_eax(1);
+		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
+			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 	}
+	if (c->x86 == 0x10 || c->x86 == 0x11)
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+#else
+
+	/*
+	 *	FIXME: We should handle the K5 here. Set up the write
+	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
+	 *	no bus pipeline)
+	 */
 
 	switch (c->x86) {
-	case 15:
-	/* Use K8 tuning for Fam10h and Fam11h */
-	case 0x10:
-	case 0x11:
-		set_cpu_cap(c, X86_FEATURE_K8);
+	case 4:
+		init_amd_k5(c);
 		break;
-	case 6:
-		set_cpu_cap(c, X86_FEATURE_K7);
+	case 5:
+		init_amd_k6(c);
+		break;
+	case 6: /* An Athlon/Duron */
+		init_amd_k7(c);
 		break;
 	}
+
+	/* K6s reports MCEs but don't actually have all the MSRs */
+	if (c->x86 < 6)
+		clear_cpu_cap(c, X86_FEATURE_MCE);
+#endif
+
+	/* Enable workaround for FXSAVE leak */
 	if (c->x86 >= 6)
 		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
 
-	display_cacheinfo(c);
-
-	if (cpuid_eax(0x80000000) >= 0x80000008)
-		c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
+	if (!c->x86_model_id[0]) {
+		switch (c->x86) {
+		case 0xf:
+			/* Should distinguish Models here, but this is only
+			   a fallback anyways. */
+			strcpy(c->x86_model_id, "Hammer");
+			break;
+		}
+	}
 
-#ifdef CONFIG_X86_HT
-	/*
-	 * On a AMD multi core setup the lower bits of the APIC id
-	 * distinguish the cores.
-	 */
-	if (c->x86_max_cores > 1) {
-		int cpu = smp_processor_id();
-		unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf;
+	display_cacheinfo(c);
 
-		if (bits == 0) {
-			while ((1 << bits) < c->x86_max_cores)
-				bits++;
-		}
-		c->cpu_core_id = c->phys_proc_id & ((1<<bits)-1);
-		c->phys_proc_id >>= bits;
-		printk(KERN_INFO "CPU %d(%d) -> Core %d\n",
-		       cpu, c->x86_max_cores, c->cpu_core_id);
+	/* Multi core CPU? */
+	if (c->extended_cpuid_level >= 0x80000008) {
+		amd_detect_cmp(c);
+		srat_detect_node(c);
 	}
+
+#ifdef CONFIG_X86_32
+	detect_ht(c);
 #endif
 
-	if (cpuid_eax(0x80000000) >= 0x80000006) {
-		if ((c->x86 == 0x10) && (cpuid_edx(0x80000006) & 0xf000))
+	if (c->extended_cpuid_level >= 0x80000006) {
+		if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000))
 			num_cache_leaves = 4;
 		else
 			num_cache_leaves = 3;
 	}
 
-	/* K6s reports MCEs but don't actually have all the MSRs */
-	if (c->x86 < 6)
-		clear_cpu_cap(c, X86_FEATURE_MCE);
+	if (c->x86 >= 0xf && c->x86 <= 0x11)
+		set_cpu_cap(c, X86_FEATURE_K8);
 
-	if (cpu_has_xmm2)
+	if (cpu_has_xmm2) {
+		/* MFENCE stops RDTSC speculation */
 		set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
+	}
+
+#ifdef CONFIG_X86_64
+	if (c->x86 == 0x10) {
+		/* do this for boot cpu */
+		if (c == &boot_cpu_data)
+			check_enable_amd_mmconf_dmi();
+
+		fam10h_check_enable_mmcfg();
+	}
+
+	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
+		unsigned long long tseg;
+
+		/*
+		 * Split up direct mapping around the TSEG SMM area.
+		 * Don't do it for gbpages because there seems very little
+		 * benefit in doing so.
+		 */
+		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
+		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+		    if ((tseg>>PMD_SHIFT) <
+				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
+			((tseg>>PMD_SHIFT) <
+				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
+			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
+			set_memory_4k((unsigned long)__va(tseg), 1);
+		}
+	}
+#endif
 }
 
+#ifdef CONFIG_X86_32
 static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 {
 	/* AMD errata T13 (order #21922) */
@@ -279,10 +445,12 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int
 	}
 	return size;
 }
+#endif
 
 static struct cpu_dev amd_cpu_dev __cpuinitdata = {
 	.c_vendor	= "AMD",
 	.c_ident	= { "AuthenticAMD" },
+#ifdef CONFIG_X86_32
 	.c_models = {
 		{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
 		  {
@@ -295,9 +463,11 @@ static struct cpu_dev amd_cpu_dev __cpuinitdata = {
 		  }
 		},
 	},
+	.c_size_cache	= amd_size_cache,
+#endif
 	.c_early_init   = early_init_amd,
 	.c_init		= init_amd,
-	.c_size_cache	= amd_size_cache,
+	.c_x86_vendor	= X86_VENDOR_AMD,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
+cpu_dev_register(amd_cpu_dev);
diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c
deleted file mode 100644
index d1692b2..0000000
--- a/arch/x86/kernel/cpu/amd_64.c
+++ /dev/null
@@ -1,224 +0,0 @@
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/numa_64.h>
-#include <asm/mmconfig.h>
-#include <asm/cacheflush.h>
-
-#include <mach_apic.h>
-
-#include "cpu.h"
-
-int force_mwait __cpuinitdata;
-
-#ifdef CONFIG_NUMA
-static int __cpuinit nearby_node(int apicid)
-{
-	int i, node;
-
-	for (i = apicid - 1; i >= 0; i--) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	return first_node(node_online_map); /* Shouldn't happen */
-}
-#endif
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
- * Assumes number of cores is a power of two.
- */
-static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits;
-#ifdef CONFIG_NUMA
-	int cpu = smp_processor_id();
-	int node = 0;
-	unsigned apicid = hard_smp_processor_id();
-#endif
-	bits = c->x86_coreid_bits;
-
-	/* Low order bits define the core id (index of core in socket) */
-	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
-	/* Convert the initial APIC ID into the socket ID */
-	c->phys_proc_id = c->initial_apicid >> bits;
-
-#ifdef CONFIG_NUMA
-	node = c->phys_proc_id;
-	if (apicid_to_node[apicid] != NUMA_NO_NODE)
-		node = apicid_to_node[apicid];
-	if (!node_online(node)) {
-		/* Two possibilities here:
-		   - The CPU is missing memory and no node was created.
-		   In that case try picking one from a nearby CPU
-		   - The APIC IDs differ from the HyperTransport node IDs
-		   which the K8 northbridge parsing fills in.
-		   Assume they are all increased by a constant offset,
-		   but in the same order as the HT nodeids.
-		   If that doesn't result in a usable node fall back to the
-		   path for the previous case.  */
-
-		int ht_nodeid = c->initial_apicid;
-
-		if (ht_nodeid >= 0 &&
-		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
-			node = apicid_to_node[ht_nodeid];
-		/* Pick a nearby node */
-		if (!node_online(node))
-			node = nearby_node(apicid);
-	}
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-#endif
-}
-
-static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits, ecx;
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level < 0x80000008)
-		return;
-
-	ecx = cpuid_ecx(0x80000008);
-
-	c->x86_max_cores = (ecx & 0xff) + 1;
-
-	/* CPU telling us the core id bits shift? */
-	bits = (ecx >> 12) & 0xF;
-
-	/* Otherwise recompute */
-	if (bits == 0) {
-		while ((1 << bits) < c->x86_max_cores)
-			bits++;
-	}
-
-	c->x86_coreid_bits = bits;
-
-#endif
-}
-
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
-{
-	early_init_amd_mc(c);
-
-	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
-	if (c->x86_power & (1<<8))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-
-	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
-}
-
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
-{
-	unsigned level;
-
-#ifdef CONFIG_SMP
-	unsigned long value;
-
-	/*
-	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
-	 * bit 6 of msr C001_0015
-	 *
-	 * Errata 63 for SH-B3 steppings
-	 * Errata 122 for all steppings (F+ have it disabled by default)
-	 */
-	if (c->x86 == 0xf) {
-		rdmsrl(MSR_K8_HWCR, value);
-		value |= 1 << 6;
-		wrmsrl(MSR_K8_HWCR, value);
-	}
-#endif
-
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_cpu_cap(c, 0*32+31);
-
-	/* On C+ stepping K8 rep microcode works well for copy/memset */
-	if (c->x86 == 0xf) {
-		level = cpuid_eax(1);
-		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
-			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	}
-	if (c->x86 == 0x10 || c->x86 == 0x11)
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-
-	/* Enable workaround for FXSAVE leak */
-	if (c->x86 >= 6)
-		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
-
-	level = get_model_name(c);
-	if (!level) {
-		switch (c->x86) {
-		case 0xf:
-			/* Should distinguish Models here, but this is only
-			   a fallback anyways. */
-			strcpy(c->x86_model_id, "Hammer");
-			break;
-		}
-	}
-	display_cacheinfo(c);
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level >= 0x80000008)
-		amd_detect_cmp(c);
-
-	if (c->extended_cpuid_level >= 0x80000006 &&
-		(cpuid_edx(0x80000006) & 0xf000))
-		num_cache_leaves = 4;
-	else
-		num_cache_leaves = 3;
-
-	if (c->x86 >= 0xf && c->x86 <= 0x11)
-		set_cpu_cap(c, X86_FEATURE_K8);
-
-	/* MFENCE stops RDTSC speculation */
-	set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-
-	if (c->x86 == 0x10) {
-		/* do this for boot cpu */
-		if (c == &boot_cpu_data)
-			check_enable_amd_mmconf_dmi();
-
-		fam10h_check_enable_mmcfg();
-	}
-
-	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
-		unsigned long long tseg;
-
-		/*
-		 * Split up direct mapping around the TSEG SMM area.
-		 * Don't do it for gbpages because there seems very little
-		 * benefit in doing so.
-		 */
-		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
-		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
-		    if ((tseg>>PMD_SHIFT) <
-				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
-			((tseg>>PMD_SHIFT) <
-				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
-			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
-			set_memory_4k((unsigned long)__va(tseg), 1);
-		}
-	}
-}
-
-static struct cpu_dev amd_cpu_dev __cpuinitdata = {
-	.c_vendor	= "AMD",
-	.c_ident	= { "AuthenticAMD" },
-	.c_early_init   = early_init_amd,
-	.c_init		= init_amd,
-};
-
-cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
-
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index a0534c0..89bfdd9 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -289,7 +289,6 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 	if (c->x86_model >= 6 && c->x86_model < 9)
 		set_cpu_cap(c, X86_FEATURE_3DNOW);
 
-	get_model_name(c);
 	display_cacheinfo(c);
 }
 
@@ -475,6 +474,7 @@ static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
 	.c_size_cache	= centaur_size_cache,
+	.c_x86_vendor	= X86_VENDOR_CENTAUR,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_CENTAUR, &centaur_cpu_dev);
+cpu_dev_register(centaur_cpu_dev);
diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c
index 1d181c4..a1625f5 100644
--- a/arch/x86/kernel/cpu/centaur_64.c
+++ b/arch/x86/kernel/cpu/centaur_64.c
@@ -16,9 +16,10 @@ static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
 
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
+	early_init_centaur(c);
+
 	if (c->x86 == 0x6 && c->x86_model >= 0xf) {
 		c->x86_cache_alignment = c->x86_clflush_size * 2;
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 	}
 	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
@@ -29,7 +30,8 @@ static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_ident	= { "CentaurHauls" },
 	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
+	.c_x86_vendor	= X86_VENDOR_CENTAUR,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_CENTAUR, &centaur_cpu_dev);
+cpu_dev_register(centaur_cpu_dev);
 
diff --git a/arch/x86/kernel/cpu/cmpxchg.c b/arch/x86/kernel/cpu/cmpxchg.c
new file mode 100644
index 0000000..2056ccf
--- /dev/null
+++ b/arch/x86/kernel/cpu/cmpxchg.c
@@ -0,0 +1,72 @@
+/*
+ * cmpxchg*() fallbacks for CPU not supporting these instructions
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+
+#ifndef CONFIG_X86_CMPXCHG
+unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
+{
+	u8 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u8 *)ptr;
+	if (prev == old)
+		*(u8 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u8);
+
+unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new)
+{
+	u16 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u16 *)ptr;
+	if (prev == old)
+		*(u16 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u16);
+
+unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
+{
+	u32 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u32 *)ptr;
+	if (prev == old)
+		*(u32 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u32);
+#endif
+
+#ifndef CONFIG_X86_CMPXCHG64
+unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
+{
+	u64 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u64 *)ptr;
+	if (prev == old)
+		*(u64 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_486_u64);
+#endif
+
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4e456bd..25581dc 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1,28 +1,62 @@
 #include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/kgdb.h>
+#include <linux/topology.h>
 #include <linux/delay.h>
 #include <linux/smp.h>
-#include <linux/module.h>
 #include <linux/percpu.h>
-#include <linux/bootmem.h>
-#include <asm/processor.h>
 #include <asm/i387.h>
 #include <asm/msr.h>
 #include <asm/io.h>
+#include <asm/linkage.h>
 #include <asm/mmu_context.h>
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
 #include <asm/asm.h>
+#include <asm/numa.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
 #include <mach_apic.h>
+#include <asm/genapic.h>
 #endif
 
+#include <asm/pda.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/desc.h>
+#include <asm/atomic.h>
+#include <asm/proto.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
 #include "cpu.h"
 
+static struct cpu_dev *this_cpu __cpuinitdata;
+
+#ifdef CONFIG_X86_64
+/* We need valid kernel segments for data and code in long mode too
+ * IRET will check the segment types  kkeil 2000/10/28
+ * Also sysret mandates a special GDT layout
+ */
+/* The TLS descriptors are currently at a different place compared to i386.
+   Hopefully nobody expects them at a fixed place (Wine?) */
 DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
+	[GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
+	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
+	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
+	[GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
+	[GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
+	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
+} };
+#else
+DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } },
 	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } },
 	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } },
@@ -56,17 +90,157 @@ DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
 	[GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } },
 	[GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } },
 } };
+#endif
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
-
+#ifdef CONFIG_X86_32
 static int cachesize_override __cpuinitdata = -1;
 static int disable_x86_serial_nr __cpuinitdata = 1;
 
-struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
+static int __init cachesize_setup(char *str)
+{
+	get_option(&str, &cachesize_override);
+	return 1;
+}
+__setup("cachesize=", cachesize_setup);
+
+static int __init x86_fxsr_setup(char *s)
+{
+	setup_clear_cpu_cap(X86_FEATURE_FXSR);
+	setup_clear_cpu_cap(X86_FEATURE_XMM);
+	return 1;
+}
+__setup("nofxsr", x86_fxsr_setup);
+
+static int __init x86_sep_setup(char *s)
+{
+	setup_clear_cpu_cap(X86_FEATURE_SEP);
+	return 1;
+}
+__setup("nosep", x86_sep_setup);
+
+/* Standard macro to see if a specific flag is changeable */
+static inline int flag_is_changeable_p(u32 flag)
+{
+	u32 f1, f2;
+
+	/*
+	 * Cyrix and IDT cpus allow disabling of CPUID
+	 * so the code below may return different results
+	 * when it is executed before and after enabling
+	 * the CPUID. Add "volatile" to not allow gcc to
+	 * optimize the subsequent calls to this function.
+	 */
+	asm volatile ("pushfl\n\t"
+		      "pushfl\n\t"
+		      "popl %0\n\t"
+		      "movl %0,%1\n\t"
+		      "xorl %2,%0\n\t"
+		      "pushl %0\n\t"
+		      "popfl\n\t"
+		      "pushfl\n\t"
+		      "popl %0\n\t"
+		      "popfl\n\t"
+		      : "=&r" (f1), "=&r" (f2)
+		      : "ir" (flag));
+
+	return ((f1^f2) & flag) != 0;
+}
+
+/* Probe for the CPUID instruction */
+static int __cpuinit have_cpuid_p(void)
+{
+	return flag_is_changeable_p(X86_EFLAGS_ID);
+}
+
+static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+	if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) {
+		/* Disable processor serial number */
+		unsigned long lo, hi;
+		rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
+		lo |= 0x200000;
+		wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
+		printk(KERN_NOTICE "CPU serial number disabled.\n");
+		clear_cpu_cap(c, X86_FEATURE_PN);
+
+		/* Disabling the serial number may affect the cpuid level */
+		c->cpuid_level = cpuid_eax(0);
+	}
+}
+
+static int __init x86_serial_nr_setup(char *s)
+{
+	disable_x86_serial_nr = 0;
+	return 1;
+}
+__setup("serialnumber", x86_serial_nr_setup);
+#else
+static inline int flag_is_changeable_p(u32 flag)
+{
+	return 1;
+}
+/* Probe for the CPUID instruction */
+static inline int have_cpuid_p(void)
+{
+	return 1;
+}
+static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+}
+#endif
+
+/*
+ * Naming convention should be: <Name> [(<Codename>)]
+ * This table only is used unless init_<vendor>() below doesn't set it;
+ * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
+ *
+ */
+
+/* Look up CPU names by table lookup. */
+static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
+{
+	struct cpu_model_info *info;
+
+	if (c->x86_model >= 16)
+		return NULL;	/* Range check */
+
+	if (!this_cpu)
+		return NULL;
+
+	info = this_cpu->c_models;
+
+	while (info && info->family) {
+		if (info->family == c->x86)
+			return info->model_names[c->x86_model];
+		info++;
+	}
+	return NULL;		/* Not found */
+}
+
+__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+
+/* Current gdt points %fs at the "master" per-cpu area: after this,
+ * it's on the real one. */
+void switch_to_new_gdt(void)
+{
+	struct desc_ptr gdt_descr;
+
+	gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
+	gdt_descr.size = GDT_SIZE - 1;
+	load_gdt(&gdt_descr);
+#ifdef CONFIG_X86_32
+	asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
+#endif
+}
+
+static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
 
 static void __cpuinit default_init(struct cpuinfo_x86 *c)
 {
+#ifdef CONFIG_X86_64
+	display_cacheinfo(c);
+#else
 	/* Not much we can do here... */
 	/* Check if at least it has cpuid */
 	if (c->cpuid_level == -1) {
@@ -76,28 +250,22 @@ static void __cpuinit default_init(struct cpuinfo_x86 *c)
 		else if (c->x86 == 3)
 			strcpy(c->x86_model_id, "386");
 	}
+#endif
 }
 
 static struct cpu_dev __cpuinitdata default_cpu = {
 	.c_init	= default_init,
 	.c_vendor = "Unknown",
+	.c_x86_vendor = X86_VENDOR_UNKNOWN,
 };
-static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
-
-static int __init cachesize_setup(char *str)
-{
-	get_option(&str, &cachesize_override);
-	return 1;
-}
-__setup("cachesize=", cachesize_setup);
 
-int __cpuinit get_model_name(struct cpuinfo_x86 *c)
+static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
 {
 	unsigned int *v;
 	char *p, *q;
 
-	if (cpuid_eax(0x80000000) < 0x80000004)
-		return 0;
+	if (c->extended_cpuid_level < 0x80000004)
+		return;
 
 	v = (unsigned int *) c->x86_model_id;
 	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
@@ -116,30 +284,34 @@ int __cpuinit get_model_name(struct cpuinfo_x86 *c)
 	     while (q <= &c->x86_model_id[48])
 		  *q++ = '\0';	/* Zero-pad the rest */
 	}
-
-	return 1;
 }
 
-
 void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
 {
-	unsigned int n, dummy, ecx, edx, l2size;
+	unsigned int n, dummy, ebx, ecx, edx, l2size;
 
-	n = cpuid_eax(0x80000000);
+	n = c->extended_cpuid_level;
 
 	if (n >= 0x80000005) {
-		cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
+		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
 		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
-			edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
-		c->x86_cache_size = (ecx>>24)+(edx>>24);
+				edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+		c->x86_cache_size = (ecx>>24) + (edx>>24);
+#ifdef CONFIG_X86_64
+		/* On K8 L1 TLB is inclusive, so don't count it */
+		c->x86_tlbsize = 0;
+#endif
 	}
 
 	if (n < 0x80000006)	/* Some chips just has a large L1. */
 		return;
 
-	ecx = cpuid_ecx(0x80000006);
+	cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
 	l2size = ecx >> 16;
 
+#ifdef CONFIG_X86_64
+	c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
+#else
 	/* do processor-specific cache resizing */
 	if (this_cpu->c_size_cache)
 		l2size = this_cpu->c_size_cache(c, l2size);
@@ -150,116 +322,106 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
 
 	if (l2size == 0)
 		return;		/* Again, no L2 cache is possible */
+#endif
 
 	c->x86_cache_size = l2size;
 
 	printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
-	       l2size, ecx & 0xFF);
+			l2size, ecx & 0xFF);
 }
 
-/*
- * Naming convention should be: <Name> [(<Codename>)]
- * This table only is used unless init_<vendor>() below doesn't set it;
- * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
- *
- */
-
-/* Look up CPU names by table lookup. */
-static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
+void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 {
-	struct cpu_model_info *info;
+#ifdef CONFIG_X86_HT
+	u32 eax, ebx, ecx, edx;
+	int index_msb, core_bits;
 
-	if (c->x86_model >= 16)
-		return NULL;	/* Range check */
+	if (!cpu_has(c, X86_FEATURE_HT))
+		return;
 
-	if (!this_cpu)
-		return NULL;
+	if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+		goto out;
 
-	info = this_cpu->c_models;
+	if (cpu_has(c, X86_FEATURE_XTOPOLOGY))
+		return;
 
-	while (info && info->family) {
-		if (info->family == c->x86)
-			return info->model_names[c->x86_model];
-		info++;
+	cpuid(1, &eax, &ebx, &ecx, &edx);
+
+	smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+	if (smp_num_siblings == 1) {
+		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
+	} else if (smp_num_siblings > 1) {
+
+		if (smp_num_siblings > NR_CPUS) {
+			printk(KERN_WARNING "CPU: Unsupported number of siblings %d",
+					smp_num_siblings);
+			smp_num_siblings = 1;
+			return;
+		}
+
+		index_msb = get_count_order(smp_num_siblings);
+#ifdef CONFIG_X86_64
+		c->phys_proc_id = phys_pkg_id(index_msb);
+#else
+		c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
+#endif
+
+		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
+
+		index_msb = get_count_order(smp_num_siblings);
+
+		core_bits = get_count_order(c->x86_max_cores);
+
+#ifdef CONFIG_X86_64
+		c->cpu_core_id = phys_pkg_id(index_msb) &
+					       ((1 << core_bits) - 1);
+#else
+		c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
+					       ((1 << core_bits) - 1);
+#endif
 	}
-	return NULL;		/* Not found */
-}
 
+out:
+	if ((c->x86_max_cores * smp_num_siblings) > 1) {
+		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+		       c->phys_proc_id);
+		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
+		       c->cpu_core_id);
+	}
+#endif
+}
 
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
 {
 	char *v = c->x86_vendor_id;
 	int i;
 	static int printed;
 
 	for (i = 0; i < X86_VENDOR_NUM; i++) {
-		if (cpu_devs[i]) {
-			if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
-			    (cpu_devs[i]->c_ident[1] &&
-			     !strcmp(v, cpu_devs[i]->c_ident[1]))) {
-				c->x86_vendor = i;
-				if (!early)
-					this_cpu = cpu_devs[i];
-				return;
-			}
+		if (!cpu_devs[i])
+			break;
+
+		if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
+		    (cpu_devs[i]->c_ident[1] &&
+		     !strcmp(v, cpu_devs[i]->c_ident[1]))) {
+			this_cpu = cpu_devs[i];
+			c->x86_vendor = this_cpu->c_x86_vendor;
+			return;
 		}
 	}
+
 	if (!printed) {
 		printed++;
-		printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
+		printk(KERN_ERR "CPU: vendor_id '%s' unknown, using generic init.\n", v);
 		printk(KERN_ERR "CPU: Your system may be unstable.\n");
 	}
+
 	c->x86_vendor = X86_VENDOR_UNKNOWN;
 	this_cpu = &default_cpu;
 }
 
-
-static int __init x86_fxsr_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_FXSR);
-	setup_clear_cpu_cap(X86_FEATURE_XMM);
-	return 1;
-}
-__setup("nofxsr", x86_fxsr_setup);
-
-
-static int __init x86_sep_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_SEP);
-	return 1;
-}
-__setup("nosep", x86_sep_setup);
-
-
-/* Standard macro to see if a specific flag is changeable */
-static inline int flag_is_changeable_p(u32 flag)
-{
-	u32 f1, f2;
-
-	asm("pushfl\n\t"
-	    "pushfl\n\t"
-	    "popl %0\n\t"
-	    "movl %0,%1\n\t"
-	    "xorl %2,%0\n\t"
-	    "pushl %0\n\t"
-	    "popfl\n\t"
-	    "pushfl\n\t"
-	    "popl %0\n\t"
-	    "popfl\n\t"
-	    : "=&r" (f1), "=&r" (f2)
-	    : "ir" (flag));
-
-	return ((f1^f2) & flag) != 0;
-}
-
-
-/* Probe for the CPUID instruction */
-static int __cpuinit have_cpuid_p(void)
-{
-	return flag_is_changeable_p(X86_EFLAGS_ID);
-}
-
-void __init cpu_detect(struct cpuinfo_x86 *c)
+void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
 {
 	/* Get vendor name */
 	cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
@@ -268,50 +430,87 @@ void __init cpu_detect(struct cpuinfo_x86 *c)
 	      (unsigned int *)&c->x86_vendor_id[4]);
 
 	c->x86 = 4;
+	/* Intel-defined flags: level 0x00000001 */
 	if (c->cpuid_level >= 0x00000001) {
 		u32 junk, tfms, cap0, misc;
 		cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
-		c->x86 = (tfms >> 8) & 15;
-		c->x86_model = (tfms >> 4) & 15;
+		c->x86 = (tfms >> 8) & 0xf;
+		c->x86_model = (tfms >> 4) & 0xf;
+		c->x86_mask = tfms & 0xf;
 		if (c->x86 == 0xf)
 			c->x86 += (tfms >> 20) & 0xff;
 		if (c->x86 >= 0x6)
-			c->x86_model += ((tfms >> 16) & 0xF) << 4;
-		c->x86_mask = tfms & 15;
+			c->x86_model += ((tfms >> 16) & 0xf) << 4;
 		if (cap0 & (1<<19)) {
-			c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8;
 			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
+			c->x86_cache_alignment = c->x86_clflush_size;
 		}
 	}
 }
-static void __cpuinit early_get_cap(struct cpuinfo_x86 *c)
+
+static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
 {
 	u32 tfms, xlvl;
-	unsigned int ebx;
+	u32 ebx;
 
-	memset(&c->x86_capability, 0, sizeof c->x86_capability);
-	if (have_cpuid_p()) {
-		/* Intel-defined flags: level 0x00000001 */
-		if (c->cpuid_level >= 0x00000001) {
-			u32 capability, excap;
-			cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
-			c->x86_capability[0] = capability;
-			c->x86_capability[4] = excap;
-		}
+	/* Intel-defined flags: level 0x00000001 */
+	if (c->cpuid_level >= 0x00000001) {
+		u32 capability, excap;
+		cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
+		c->x86_capability[0] = capability;
+		c->x86_capability[4] = excap;
+	}
 
-		/* AMD-defined flags: level 0x80000001 */
-		xlvl = cpuid_eax(0x80000000);
-		if ((xlvl & 0xffff0000) == 0x80000000) {
-			if (xlvl >= 0x80000001) {
-				c->x86_capability[1] = cpuid_edx(0x80000001);
-				c->x86_capability[6] = cpuid_ecx(0x80000001);
-			}
+	/* AMD-defined flags: level 0x80000001 */
+	xlvl = cpuid_eax(0x80000000);
+	c->extended_cpuid_level = xlvl;
+	if ((xlvl & 0xffff0000) == 0x80000000) {
+		if (xlvl >= 0x80000001) {
+			c->x86_capability[1] = cpuid_edx(0x80000001);
+			c->x86_capability[6] = cpuid_ecx(0x80000001);
 		}
+	}
+
+#ifdef CONFIG_X86_64
+	if (c->extended_cpuid_level >= 0x80000008) {
+		u32 eax = cpuid_eax(0x80000008);
 
+		c->x86_virt_bits = (eax >> 8) & 0xff;
+		c->x86_phys_bits = eax & 0xff;
 	}
+#endif
+
+	if (c->extended_cpuid_level >= 0x80000007)
+		c->x86_power = cpuid_edx(0x80000007);
 
 }
 
+static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_32
+	int i;
+
+	/*
+	 * First of all, decide if this is a 486 or higher
+	 * It's a 486 if we can modify the AC flag
+	 */
+	if (flag_is_changeable_p(X86_EFLAGS_AC))
+		c->x86 = 4;
+	else
+		c->x86 = 3;
+
+	for (i = 0; i < X86_VENDOR_NUM; i++)
+		if (cpu_devs[i] && cpu_devs[i]->c_identify) {
+			c->x86_vendor_id[0] = 0;
+			cpu_devs[i]->c_identify(c);
+			if (c->x86_vendor_id[0]) {
+				get_cpu_vendor(c);
+				break;
+			}
+		}
+#endif
+}
+
 /*
  * Do minimum CPU detection early.
  * Fields really needed: vendor, cpuid_level, family, model, mask,
@@ -321,25 +520,61 @@ static void __cpuinit early_get_cap(struct cpuinfo_x86 *c)
  * WARNING: this function is only called on the BP.  Don't add code here
  * that is supposed to run on all CPUs.
  */
-static void __init early_cpu_detect(void)
+static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 {
-	struct cpuinfo_x86 *c = &boot_cpu_data;
-
-	c->x86_cache_alignment = 32;
+#ifdef CONFIG_X86_64
+	c->x86_clflush_size = 64;
+#else
 	c->x86_clflush_size = 32;
+#endif
+	c->x86_cache_alignment = c->x86_clflush_size;
+
+	memset(&c->x86_capability, 0, sizeof c->x86_capability);
+	c->extended_cpuid_level = 0;
+
+	if (!have_cpuid_p())
+		identify_cpu_without_cpuid(c);
 
+	/* cyrix could have cpuid enabled via c_identify()*/
 	if (!have_cpuid_p())
 		return;
 
 	cpu_detect(c);
 
-	get_cpu_vendor(c, 1);
+	get_cpu_vendor(c);
+
+	get_cpu_cap(c);
 
-	early_get_cap(c);
+	if (this_cpu->c_early_init)
+		this_cpu->c_early_init(c);
 
-	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
-	    cpu_devs[c->x86_vendor]->c_early_init)
-		cpu_devs[c->x86_vendor]->c_early_init(c);
+	validate_pat_support(c);
+}
+
+void __init early_cpu_init(void)
+{
+	struct cpu_dev **cdev;
+	int count = 0;
+
+	printk("KERNEL supported cpus:\n");
+	for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
+		struct cpu_dev *cpudev = *cdev;
+		unsigned int j;
+
+		if (count >= X86_VENDOR_NUM)
+			break;
+		cpu_devs[count] = cpudev;
+		count++;
+
+		for (j = 0; j < 2; j++) {
+			if (!cpudev->c_ident[j])
+				continue;
+			printk("  %s %s\n", cpudev->c_vendor,
+				cpudev->c_ident[j]);
+		}
+	}
+
+	early_identify_cpu(&boot_cpu_data);
 }
 
 /*
@@ -357,86 +592,41 @@ static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
 
 static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 {
-	u32 tfms, xlvl;
-	unsigned int ebx;
-
-	if (have_cpuid_p()) {
-		/* Get vendor name */
-		cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
-		      (unsigned int *)&c->x86_vendor_id[0],
-		      (unsigned int *)&c->x86_vendor_id[8],
-		      (unsigned int *)&c->x86_vendor_id[4]);
-
-		get_cpu_vendor(c, 0);
-		/* Initialize the standard set of capabilities */
-		/* Note that the vendor-specific code below might override */
-		/* Intel-defined flags: level 0x00000001 */
-		if (c->cpuid_level >= 0x00000001) {
-			u32 capability, excap;
-			cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
-			c->x86_capability[0] = capability;
-			c->x86_capability[4] = excap;
-			c->x86 = (tfms >> 8) & 15;
-			c->x86_model = (tfms >> 4) & 15;
-			if (c->x86 == 0xf)
-				c->x86 += (tfms >> 20) & 0xff;
-			if (c->x86 >= 0x6)
-				c->x86_model += ((tfms >> 16) & 0xF) << 4;
-			c->x86_mask = tfms & 15;
-			c->initial_apicid = (ebx >> 24) & 0xFF;
-#ifdef CONFIG_X86_HT
-			c->apicid = phys_pkg_id(c->initial_apicid, 0);
-			c->phys_proc_id = c->initial_apicid;
-#else
-			c->apicid = c->initial_apicid;
-#endif
-			if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
-				c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8;
-		} else {
-			/* Have CPUID level 0 only - unheard of */
-			c->x86 = 4;
-		}
+	c->extended_cpuid_level = 0;
 
-		/* AMD-defined flags: level 0x80000001 */
-		xlvl = cpuid_eax(0x80000000);
-		if ((xlvl & 0xffff0000) == 0x80000000) {
-			if (xlvl >= 0x80000001) {
-				c->x86_capability[1] = cpuid_edx(0x80000001);
-				c->x86_capability[6] = cpuid_ecx(0x80000001);
-			}
-			if (xlvl >= 0x80000004)
-				get_model_name(c); /* Default name */
-		}
+	if (!have_cpuid_p())
+		identify_cpu_without_cpuid(c);
 
-		init_scattered_cpuid_features(c);
-		detect_nopl(c);
-	}
-}
+	/* cyrix could have cpuid enabled via c_identify()*/
+	if (!have_cpuid_p())
+		return;
 
-static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
-{
-	if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) {
-		/* Disable processor serial number */
-		unsigned long lo, hi;
-		rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
-		lo |= 0x200000;
-		wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
-		printk(KERN_NOTICE "CPU serial number disabled.\n");
-		clear_cpu_cap(c, X86_FEATURE_PN);
+	cpu_detect(c);
 
-		/* Disabling the serial number may affect the cpuid level */
-		c->cpuid_level = cpuid_eax(0);
-	}
-}
+	get_cpu_vendor(c);
 
-static int __init x86_serial_nr_setup(char *s)
-{
-	disable_x86_serial_nr = 0;
-	return 1;
-}
-__setup("serialnumber", x86_serial_nr_setup);
+	get_cpu_cap(c);
+
+	if (c->cpuid_level >= 0x00000001) {
+		c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_HT
+		c->apicid = phys_pkg_id(c->initial_apicid, 0);
+# else
+		c->apicid = c->initial_apicid;
+# endif
+#endif
 
+#ifdef CONFIG_X86_HT
+		c->phys_proc_id = c->initial_apicid;
+#endif
+	}
 
+	get_model_name(c); /* Default name */
+
+	init_scattered_cpuid_features(c);
+	detect_nopl(c);
+}
 
 /*
  * This does the hard work of actually picking apart the CPU stuff...
@@ -448,30 +638,29 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	c->loops_per_jiffy = loops_per_jiffy;
 	c->x86_cache_size = -1;
 	c->x86_vendor = X86_VENDOR_UNKNOWN;
-	c->cpuid_level = -1;	/* CPUID not detected */
 	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
 	c->x86_vendor_id[0] = '\0'; /* Unset */
 	c->x86_model_id[0] = '\0';  /* Unset */
 	c->x86_max_cores = 1;
+	c->x86_coreid_bits = 0;
+#ifdef CONFIG_X86_64
+	c->x86_clflush_size = 64;
+#else
+	c->cpuid_level = -1;	/* CPUID not detected */
 	c->x86_clflush_size = 32;
+#endif
+	c->x86_cache_alignment = c->x86_clflush_size;
 	memset(&c->x86_capability, 0, sizeof c->x86_capability);
 
-	if (!have_cpuid_p()) {
-		/*
-		 * First of all, decide if this is a 486 or higher
-		 * It's a 486 if we can modify the AC flag
-		 */
-		if (flag_is_changeable_p(X86_EFLAGS_AC))
-			c->x86 = 4;
-		else
-			c->x86 = 3;
-	}
-
 	generic_identify(c);
 
 	if (this_cpu->c_identify)
 		this_cpu->c_identify(c);
 
+#ifdef CONFIG_X86_64
+	c->apicid = phys_pkg_id(0);
+#endif
+
 	/*
 	 * Vendor-specific initialization.  In this section we
 	 * canonicalize the feature flags, meaning if there are
@@ -505,6 +694,10 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 				c->x86, c->x86_model);
 	}
 
+#ifdef CONFIG_X86_64
+	detect_ht(c);
+#endif
+
 	/*
 	 * On SMP, boot_cpu_data holds the common feature set between
 	 * all CPUs; so make sure that we indicate which features are
@@ -513,7 +706,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	 */
 	if (c != &boot_cpu_data) {
 		/* AND the already accumulated flags with these */
-		for (i = 0 ; i < NCAPINTS ; i++)
+		for (i = 0; i < NCAPINTS; i++)
 			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
 	}
 
@@ -521,72 +714,91 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	for (i = 0; i < NCAPINTS; i++)
 		c->x86_capability[i] &= ~cleared_cpu_caps[i];
 
+#ifdef CONFIG_X86_MCE
 	/* Init Machine Check Exception if available. */
 	mcheck_init(c);
+#endif
 
 	select_idle_routine(c);
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+	numa_add_cpu(smp_processor_id());
+#endif
 }
 
+#ifdef CONFIG_X86_64
+static void vgetcpu_set_mode(void)
+{
+	if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
+		vgetcpu_mode = VGETCPU_RDTSCP;
+	else
+		vgetcpu_mode = VGETCPU_LSL;
+}
+#endif
+
 void __init identify_boot_cpu(void)
 {
 	identify_cpu(&boot_cpu_data);
+#ifdef CONFIG_X86_32
 	sysenter_setup();
 	enable_sep_cpu();
+#else
+	vgetcpu_set_mode();
+#endif
 }
 
 void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
 {
 	BUG_ON(c == &boot_cpu_data);
 	identify_cpu(c);
+#ifdef CONFIG_X86_32
 	enable_sep_cpu();
+#endif
 	mtrr_ap_init();
 }
 
-#ifdef CONFIG_X86_HT
-void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
-	u32 	eax, ebx, ecx, edx;
-	int 	index_msb, core_bits;
-
-	cpuid(1, &eax, &ebx, &ecx, &edx);
-
-	if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY))
-		return;
-
-	smp_num_siblings = (ebx & 0xff0000) >> 16;
+struct msr_range {
+	unsigned min;
+	unsigned max;
+};
 
-	if (smp_num_siblings == 1) {
-		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
-	} else if (smp_num_siblings > 1) {
+static struct msr_range msr_range_array[] __cpuinitdata = {
+	{ 0x00000000, 0x00000418},
+	{ 0xc0000000, 0xc000040b},
+	{ 0xc0010000, 0xc0010142},
+	{ 0xc0011000, 0xc001103b},
+};
 
-		if (smp_num_siblings > NR_CPUS) {
-			printk(KERN_WARNING "CPU: Unsupported number of the "
-					"siblings %d", smp_num_siblings);
-			smp_num_siblings = 1;
-			return;
+static void __cpuinit print_cpu_msr(void)
+{
+	unsigned index;
+	u64 val;
+	int i;
+	unsigned index_min, index_max;
+
+	for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
+		index_min = msr_range_array[i].min;
+		index_max = msr_range_array[i].max;
+		for (index = index_min; index < index_max; index++) {
+			if (rdmsrl_amd_safe(index, &val))
+				continue;
+			printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
 		}
+	}
+}
 
-		index_msb = get_count_order(smp_num_siblings);
-		c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
-
-		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
-		       c->phys_proc_id);
-
-		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
-		index_msb = get_count_order(smp_num_siblings) ;
-
-		core_bits = get_count_order(c->x86_max_cores);
+static int show_msr __cpuinitdata;
+static __init int setup_show_msr(char *arg)
+{
+	int num;
 
-		c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
-					       ((1 << core_bits) - 1);
+	get_option(&arg, &num);
 
-		if (c->x86_max_cores > 1)
-			printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
-			       c->cpu_core_id);
-	}
+	if (num > 0)
+		show_msr = num;
+	return 1;
 }
-#endif
+__setup("show_msr=", setup_show_msr);
 
 static __init int setup_noclflush(char *arg)
 {
@@ -604,18 +816,26 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
 	else if (c->cpuid_level >= 0)
 		vendor = c->x86_vendor_id;
 
-	if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
-		printk("%s ", vendor);
+	if (vendor && !strstr(c->x86_model_id, vendor))
+		printk(KERN_CONT "%s ", vendor);
 
-	if (!c->x86_model_id[0])
-		printk("%d86", c->x86);
+	if (c->x86_model_id[0])
+		printk(KERN_CONT "%s", c->x86_model_id);
 	else
-		printk("%s", c->x86_model_id);
+		printk(KERN_CONT "%d86", c->x86);
 
 	if (c->x86_mask || c->cpuid_level >= 0)
-		printk(" stepping %02x\n", c->x86_mask);
+		printk(KERN_CONT " stepping %02x\n", c->x86_mask);
 	else
-		printk("\n");
+		printk(KERN_CONT "\n");
+
+#ifdef CONFIG_SMP
+	if (c->cpu_index < show_msr)
+		print_cpu_msr();
+#else
+	if (show_msr)
+		print_cpu_msr();
+#endif
 }
 
 static __init int setup_disablecpuid(char *arg)
@@ -631,19 +851,89 @@ __setup("clearcpuid=", setup_disablecpuid);
 
 cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
 
-void __init early_cpu_init(void)
+#ifdef CONFIG_X86_64
+struct x8664_pda **_cpu_pda __read_mostly;
+EXPORT_SYMBOL(_cpu_pda);
+
+struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
+
+char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
+
+void __cpuinit pda_init(int cpu)
 {
-	struct cpu_vendor_dev *cvdev;
+	struct x8664_pda *pda = cpu_pda(cpu);
+
+	/* Setup up data that may be needed in __get_free_pages early */
+	loadsegment(fs, 0);
+	loadsegment(gs, 0);
+	/* Memory clobbers used to order PDA accessed */
+	mb();
+	wrmsrl(MSR_GS_BASE, pda);
+	mb();
+
+	pda->cpunumber = cpu;
+	pda->irqcount = -1;
+	pda->kernelstack = (unsigned long)stack_thread_info() -
+				 PDA_STACKOFFSET + THREAD_SIZE;
+	pda->active_mm = &init_mm;
+	pda->mmu_state = 0;
+
+	if (cpu == 0) {
+		/* others are initialized in smpboot.c */
+		pda->pcurrent = &init_task;
+		pda->irqstackptr = boot_cpu_stack;
+		pda->irqstackptr += IRQSTACKSIZE - 64;
+	} else {
+		if (!pda->irqstackptr) {
+			pda->irqstackptr = (char *)
+				__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+			if (!pda->irqstackptr)
+				panic("cannot allocate irqstack for cpu %d",
+				      cpu);
+			pda->irqstackptr += IRQSTACKSIZE - 64;
+		}
+
+		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
+			pda->nodenumber = cpu_to_node(cpu);
+	}
+}
+
+char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
+			   DEBUG_STKSZ] __page_aligned_bss;
 
-	for (cvdev = __x86cpuvendor_start ;
-	     cvdev < __x86cpuvendor_end   ;
-	     cvdev++)
-		cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
+extern asmlinkage void ignore_sysret(void);
 
-	early_cpu_detect();
-	validate_pat_support(&boot_cpu_data);
+/* May not be marked __init: used by software suspend */
+void syscall_init(void)
+{
+	/*
+	 * LSTAR and STAR live in a bit strange symbiosis.
+	 * They both write to the same internal register. STAR allows to
+	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
+	 */
+	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32);
+	wrmsrl(MSR_LSTAR, system_call);
+	wrmsrl(MSR_CSTAR, ignore_sysret);
+
+#ifdef CONFIG_IA32_EMULATION
+	syscall32_cpu_init();
+#endif
+
+	/* Flags to clear on syscall */
+	wrmsrl(MSR_SYSCALL_MASK,
+	       X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
 }
 
+unsigned long kernel_eflags;
+
+/*
+ * Copies of the original ist values from the tss are only accessed during
+ * debugging, no special alignment required.
+ */
+DEFINE_PER_CPU(struct orig_ist, orig_ist);
+
+#else
+
 /* Make sure %fs is initialized properly in idle threads */
 struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
 {
@@ -651,25 +941,136 @@ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
 	regs->fs = __KERNEL_PERCPU;
 	return regs;
 }
-
-/* Current gdt points %fs at the "master" per-cpu area: after this,
- * it's on the real one. */
-void switch_to_new_gdt(void)
-{
-	struct desc_ptr gdt_descr;
-
-	gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
-	gdt_descr.size = GDT_SIZE - 1;
-	load_gdt(&gdt_descr);
-	asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
-}
+#endif
 
 /*
  * cpu_init() initializes state that is per-CPU. Some data is already
  * initialized (naturally) in the bootstrap process, such as the GDT
  * and IDT. We reload them nevertheless, this function acts as a
  * 'CPU state barrier', nothing should get across.
+ * A lot of state is already set up in PDA init for 64 bit
  */
+#ifdef CONFIG_X86_64
+void __cpuinit cpu_init(void)
+{
+	int cpu = stack_smp_processor_id();
+	struct tss_struct *t = &per_cpu(init_tss, cpu);
+	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
+	unsigned long v;
+	char *estacks = NULL;
+	struct task_struct *me;
+	int i;
+
+	/* CPU 0 is initialised in head64.c */
+	if (cpu != 0)
+		pda_init(cpu);
+	else
+		estacks = boot_exception_stacks;
+
+	me = current;
+
+	if (cpu_test_and_set(cpu, cpu_initialized))
+		panic("CPU#%d already initialized!\n", cpu);
+
+	printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+
+	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+
+	/*
+	 * Initialize the per-CPU GDT with the boot GDT,
+	 * and set up the GDT descriptor:
+	 */
+
+	switch_to_new_gdt();
+	load_idt((const struct desc_ptr *)&idt_descr);
+
+	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
+	syscall_init();
+
+	wrmsrl(MSR_FS_BASE, 0);
+	wrmsrl(MSR_KERNEL_GS_BASE, 0);
+	barrier();
+
+	check_efer();
+	if (cpu != 0 && x2apic)
+		enable_x2apic();
+
+	/*
+	 * set up and load the per-CPU TSS
+	 */
+	if (!orig_ist->ist[0]) {
+		static const unsigned int order[N_EXCEPTION_STACKS] = {
+		  [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+		  [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+		};
+		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+			if (cpu) {
+				estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+				if (!estacks)
+					panic("Cannot allocate exception "
+					      "stack %ld %d\n", v, cpu);
+			}
+			estacks += PAGE_SIZE << order[v];
+			orig_ist->ist[v] = t->x86_tss.ist[v] =
+					(unsigned long)estacks;
+		}
+	}
+
+	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+	/*
+	 * <= is required because the CPU will access up to
+	 * 8 bits beyond the end of the IO permission bitmap.
+	 */
+	for (i = 0; i <= IO_BITMAP_LONGS; i++)
+		t->io_bitmap[i] = ~0UL;
+
+	atomic_inc(&init_mm.mm_count);
+	me->active_mm = &init_mm;
+	if (me->mm)
+		BUG();
+	enter_lazy_tlb(&init_mm, me);
+
+	load_sp0(t, &current->thread);
+	set_tss_desc(cpu, t);
+	load_TR_desc();
+	load_LDT(&init_mm.context);
+
+#ifdef CONFIG_KGDB
+	/*
+	 * If the kgdb is connected no debug regs should be altered.  This
+	 * is only applicable when KGDB and a KGDB I/O module are built
+	 * into the kernel and you are using early debugging with
+	 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
+	 */
+	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
+		arch_kgdb_ops.correct_hw_break();
+	else {
+#endif
+	/*
+	 * Clear all 6 debug registers:
+	 */
+
+	set_debugreg(0UL, 0);
+	set_debugreg(0UL, 1);
+	set_debugreg(0UL, 2);
+	set_debugreg(0UL, 3);
+	set_debugreg(0UL, 6);
+	set_debugreg(0UL, 7);
+#ifdef CONFIG_KGDB
+	/* If the kgdb is connected no debug regs should be altered. */
+	}
+#endif
+
+	fpu_init();
+
+	raw_local_save_flags(kernel_eflags);
+
+	if (is_uv_system())
+		uv_cpu_init();
+}
+
+#else
+
 void __cpuinit cpu_init(void)
 {
 	int cpu = smp_processor_id();
@@ -723,19 +1124,21 @@ void __cpuinit cpu_init(void)
 	/*
 	 * Force FPU initialization:
 	 */
-	current_thread_info()->status = 0;
+	if (cpu_has_xsave)
+		current_thread_info()->status = TS_XSAVE;
+	else
+		current_thread_info()->status = 0;
 	clear_used_math();
 	mxcsr_feature_mask_init();
-}
 
-#ifdef CONFIG_HOTPLUG_CPU
-void __cpuinit cpu_uninit(void)
-{
-	int cpu = raw_smp_processor_id();
-	cpu_clear(cpu, cpu_initialized);
+	/*
+	 * Boot processor to setup the FP and extended state context info.
+	 */
+	if (!smp_processor_id())
+		init_thread_xstate();
 
-	/* lazy TLB state */
-	per_cpu(cpu_tlbstate, cpu).state = 0;
-	per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
+	xsave_init();
 }
+
+
 #endif
diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
deleted file mode 100644
index a11f5d4..0000000
--- a/arch/x86/kernel/cpu/common_64.c
+++ /dev/null
@@ -1,712 +0,0 @@
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/kgdb.h>
-#include <linux/topology.h>
-#include <linux/delay.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
-#include <asm/i387.h>
-#include <asm/msr.h>
-#include <asm/io.h>
-#include <asm/linkage.h>
-#include <asm/mmu_context.h>
-#include <asm/mtrr.h>
-#include <asm/mce.h>
-#include <asm/pat.h>
-#include <asm/asm.h>
-#include <asm/numa.h>
-#ifdef CONFIG_X86_LOCAL_APIC
-#include <asm/mpspec.h>
-#include <asm/apic.h>
-#include <mach_apic.h>
-#endif
-#include <asm/pda.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/desc.h>
-#include <asm/atomic.h>
-#include <asm/proto.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/genapic.h>
-
-#include "cpu.h"
-
-/* We need valid kernel segments for data and code in long mode too
- * IRET will check the segment types  kkeil 2000/10/28
- * Also sysret mandates a special GDT layout
- */
-/* The TLS descriptors are currently at a different place compared to i386.
-   Hopefully nobody expects them at a fixed place (Wine?) */
-DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
-	[GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
-	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
-	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
-	[GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
-	[GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
-	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
-} };
-EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
-
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
-
-/* Current gdt points %fs at the "master" per-cpu area: after this,
- * it's on the real one. */
-void switch_to_new_gdt(void)
-{
-	struct desc_ptr gdt_descr;
-
-	gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
-	gdt_descr.size = GDT_SIZE - 1;
-	load_gdt(&gdt_descr);
-}
-
-struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
-
-static void __cpuinit default_init(struct cpuinfo_x86 *c)
-{
-	display_cacheinfo(c);
-}
-
-static struct cpu_dev __cpuinitdata default_cpu = {
-	.c_init	= default_init,
-	.c_vendor = "Unknown",
-};
-static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
-
-int __cpuinit get_model_name(struct cpuinfo_x86 *c)
-{
-	unsigned int *v;
-
-	if (c->extended_cpuid_level < 0x80000004)
-		return 0;
-
-	v = (unsigned int *) c->x86_model_id;
-	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
-	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
-	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
-	c->x86_model_id[48] = 0;
-	return 1;
-}
-
-
-void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
-{
-	unsigned int n, dummy, ebx, ecx, edx;
-
-	n = c->extended_cpuid_level;
-
-	if (n >= 0x80000005) {
-		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
-		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
-		       "D cache %dK (%d bytes/line)\n",
-		       edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
-		c->x86_cache_size = (ecx>>24) + (edx>>24);
-		/* On K8 L1 TLB is inclusive, so don't count it */
-		c->x86_tlbsize = 0;
-	}
-
-	if (n >= 0x80000006) {
-		cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
-		ecx = cpuid_ecx(0x80000006);
-		c->x86_cache_size = ecx >> 16;
-		c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
-
-		printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
-		c->x86_cache_size, ecx & 0xFF);
-	}
-}
-
-void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	u32 eax, ebx, ecx, edx;
-	int index_msb, core_bits;
-
-	cpuid(1, &eax, &ebx, &ecx, &edx);
-
-
-	if (!cpu_has(c, X86_FEATURE_HT))
-		return;
-	if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
-		goto out;
-
-	smp_num_siblings = (ebx & 0xff0000) >> 16;
-
-	if (smp_num_siblings == 1) {
-		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
-	} else if (smp_num_siblings > 1) {
-
-		if (smp_num_siblings > NR_CPUS) {
-			printk(KERN_WARNING "CPU: Unsupported number of "
-			       "siblings %d", smp_num_siblings);
-			smp_num_siblings = 1;
-			return;
-		}
-
-		index_msb = get_count_order(smp_num_siblings);
-		c->phys_proc_id = phys_pkg_id(index_msb);
-
-		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
-		index_msb = get_count_order(smp_num_siblings);
-
-		core_bits = get_count_order(c->x86_max_cores);
-
-		c->cpu_core_id = phys_pkg_id(index_msb) &
-					       ((1 << core_bits) - 1);
-	}
-out:
-	if ((c->x86_max_cores * smp_num_siblings) > 1) {
-		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
-		       c->phys_proc_id);
-		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
-		       c->cpu_core_id);
-	}
-
-#endif
-}
-
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
-{
-	char *v = c->x86_vendor_id;
-	int i;
-	static int printed;
-
-	for (i = 0; i < X86_VENDOR_NUM; i++) {
-		if (cpu_devs[i]) {
-			if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
-			    (cpu_devs[i]->c_ident[1] &&
-			    !strcmp(v, cpu_devs[i]->c_ident[1]))) {
-				c->x86_vendor = i;
-				this_cpu = cpu_devs[i];
-				return;
-			}
-		}
-	}
-	if (!printed) {
-		printed++;
-		printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
-		printk(KERN_ERR "CPU: Your system may be unstable.\n");
-	}
-	c->x86_vendor = X86_VENDOR_UNKNOWN;
-}
-
-static void __init early_cpu_support_print(void)
-{
-	int i,j;
-	struct cpu_dev *cpu_devx;
-
-	printk("KERNEL supported cpus:\n");
-	for (i = 0; i < X86_VENDOR_NUM; i++) {
-		cpu_devx = cpu_devs[i];
-		if (!cpu_devx)
-			continue;
-		for (j = 0; j < 2; j++) {
-			if (!cpu_devx->c_ident[j])
-				continue;
-			printk("  %s %s\n", cpu_devx->c_vendor,
-				cpu_devx->c_ident[j]);
-		}
-	}
-}
-
-/*
- * The NOPL instruction is supposed to exist on all CPUs with
- * family >= 6, unfortunately, that's not true in practice because
- * of early VIA chips and (more importantly) broken virtualizers that
- * are not easy to detect.  Hence, probe for it based on first
- * principles.
- *
- * Note: no 64-bit chip is known to lack these, but put the code here
- * for consistency with 32 bits, and to make it utterly trivial to
- * diagnose the problem should it ever surface.
- */
-static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
-{
-	const u32 nopl_signature = 0x888c53b1; /* Random number */
-	u32 has_nopl = nopl_signature;
-
-	clear_cpu_cap(c, X86_FEATURE_NOPL);
-	if (c->x86 >= 6) {
-		asm volatile("\n"
-			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
-			     "2:\n"
-			     "        .section .fixup,\"ax\"\n"
-			     "3:      xor %0,%0\n"
-			     "        jmp 2b\n"
-			     "        .previous\n"
-			     _ASM_EXTABLE(1b,3b)
-			     : "+a" (has_nopl));
-
-		if (has_nopl == nopl_signature)
-			set_cpu_cap(c, X86_FEATURE_NOPL);
-	}
-}
-
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
-
-void __init early_cpu_init(void)
-{
-        struct cpu_vendor_dev *cvdev;
-
-        for (cvdev = __x86cpuvendor_start ;
-             cvdev < __x86cpuvendor_end   ;
-             cvdev++)
-                cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
-	early_cpu_support_print();
-	early_identify_cpu(&boot_cpu_data);
-}
-
-/* Do some early cpuid on the boot CPU to get some parameter that are
-   needed before check_bugs. Everything advanced is in identify_cpu
-   below. */
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
-{
-	u32 tfms, xlvl;
-
-	c->loops_per_jiffy = loops_per_jiffy;
-	c->x86_cache_size = -1;
-	c->x86_vendor = X86_VENDOR_UNKNOWN;
-	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
-	c->x86_vendor_id[0] = '\0'; /* Unset */
-	c->x86_model_id[0] = '\0';  /* Unset */
-	c->x86_clflush_size = 64;
-	c->x86_cache_alignment = c->x86_clflush_size;
-	c->x86_max_cores = 1;
-	c->x86_coreid_bits = 0;
-	c->extended_cpuid_level = 0;
-	memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
-	/* Get vendor name */
-	cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
-	      (unsigned int *)&c->x86_vendor_id[0],
-	      (unsigned int *)&c->x86_vendor_id[8],
-	      (unsigned int *)&c->x86_vendor_id[4]);
-
-	get_cpu_vendor(c);
-
-	/* Initialize the standard set of capabilities */
-	/* Note that the vendor-specific code below might override */
-
-	/* Intel-defined flags: level 0x00000001 */
-	if (c->cpuid_level >= 0x00000001) {
-		__u32 misc;
-		cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
-		      &c->x86_capability[0]);
-		c->x86 = (tfms >> 8) & 0xf;
-		c->x86_model = (tfms >> 4) & 0xf;
-		c->x86_mask = tfms & 0xf;
-		if (c->x86 == 0xf)
-			c->x86 += (tfms >> 20) & 0xff;
-		if (c->x86 >= 0x6)
-			c->x86_model += ((tfms >> 16) & 0xF) << 4;
-		if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
-			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
-	} else {
-		/* Have CPUID level 0 only - unheard of */
-		c->x86 = 4;
-	}
-
-	c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
-#ifdef CONFIG_SMP
-	c->phys_proc_id = c->initial_apicid;
-#endif
-	/* AMD-defined flags: level 0x80000001 */
-	xlvl = cpuid_eax(0x80000000);
-	c->extended_cpuid_level = xlvl;
-	if ((xlvl & 0xffff0000) == 0x80000000) {
-		if (xlvl >= 0x80000001) {
-			c->x86_capability[1] = cpuid_edx(0x80000001);
-			c->x86_capability[6] = cpuid_ecx(0x80000001);
-		}
-		if (xlvl >= 0x80000004)
-			get_model_name(c); /* Default name */
-	}
-
-	/* Transmeta-defined flags: level 0x80860001 */
-	xlvl = cpuid_eax(0x80860000);
-	if ((xlvl & 0xffff0000) == 0x80860000) {
-		/* Don't set x86_cpuid_level here for now to not confuse. */
-		if (xlvl >= 0x80860001)
-			c->x86_capability[2] = cpuid_edx(0x80860001);
-	}
-
-	if (c->extended_cpuid_level >= 0x80000007)
-		c->x86_power = cpuid_edx(0x80000007);
-
-	if (c->extended_cpuid_level >= 0x80000008) {
-		u32 eax = cpuid_eax(0x80000008);
-
-		c->x86_virt_bits = (eax >> 8) & 0xff;
-		c->x86_phys_bits = eax & 0xff;
-	}
-
-	detect_nopl(c);
-
-	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
-	    cpu_devs[c->x86_vendor]->c_early_init)
-		cpu_devs[c->x86_vendor]->c_early_init(c);
-
-	validate_pat_support(c);
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
-{
-	int i;
-
-	early_identify_cpu(c);
-
-	init_scattered_cpuid_features(c);
-
-	c->apicid = phys_pkg_id(0);
-
-	/*
-	 * Vendor-specific initialization.  In this section we
-	 * canonicalize the feature flags, meaning if there are
-	 * features a certain CPU supports which CPUID doesn't
-	 * tell us, CPUID claiming incorrect flags, or other bugs,
-	 * we handle them here.
-	 *
-	 * At the end of this section, c->x86_capability better
-	 * indicate the features this CPU genuinely supports!
-	 */
-	if (this_cpu->c_init)
-		this_cpu->c_init(c);
-
-	detect_ht(c);
-
-	/*
-	 * On SMP, boot_cpu_data holds the common feature set between
-	 * all CPUs; so make sure that we indicate which features are
-	 * common between the CPUs.  The first time this routine gets
-	 * executed, c == &boot_cpu_data.
-	 */
-	if (c != &boot_cpu_data) {
-		/* AND the already accumulated flags with these */
-		for (i = 0; i < NCAPINTS; i++)
-			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
-	}
-
-	/* Clear all flags overriden by options */
-	for (i = 0; i < NCAPINTS; i++)
-		c->x86_capability[i] &= ~cleared_cpu_caps[i];
-
-#ifdef CONFIG_X86_MCE
-	mcheck_init(c);
-#endif
-	select_idle_routine(c);
-
-#ifdef CONFIG_NUMA
-	numa_add_cpu(smp_processor_id());
-#endif
-
-}
-
-void __cpuinit identify_boot_cpu(void)
-{
-	identify_cpu(&boot_cpu_data);
-}
-
-void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
-{
-	BUG_ON(c == &boot_cpu_data);
-	identify_cpu(c);
-	mtrr_ap_init();
-}
-
-static __init int setup_noclflush(char *arg)
-{
-	setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
-	return 1;
-}
-__setup("noclflush", setup_noclflush);
-
-void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
-{
-	if (c->x86_model_id[0])
-		printk(KERN_CONT "%s", c->x86_model_id);
-
-	if (c->x86_mask || c->cpuid_level >= 0)
-		printk(KERN_CONT " stepping %02x\n", c->x86_mask);
-	else
-		printk(KERN_CONT "\n");
-}
-
-static __init int setup_disablecpuid(char *arg)
-{
-	int bit;
-	if (get_option(&arg, &bit) && bit < NCAPINTS*32)
-		setup_clear_cpu_cap(bit);
-	else
-		return 0;
-	return 1;
-}
-__setup("clearcpuid=", setup_disablecpuid);
-
-cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
-
-struct x8664_pda **_cpu_pda __read_mostly;
-EXPORT_SYMBOL(_cpu_pda);
-
-struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
-
-char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
-
-unsigned long __supported_pte_mask __read_mostly = ~0UL;
-EXPORT_SYMBOL_GPL(__supported_pte_mask);
-
-static int do_not_nx __cpuinitdata;
-
-/* noexec=on|off
-Control non executable mappings for 64bit processes.
-
-on	Enable(default)
-off	Disable
-*/
-static int __init nonx_setup(char *str)
-{
-	if (!str)
-		return -EINVAL;
-	if (!strncmp(str, "on", 2)) {
-		__supported_pte_mask |= _PAGE_NX;
-		do_not_nx = 0;
-	} else if (!strncmp(str, "off", 3)) {
-		do_not_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
-	}
-	return 0;
-}
-early_param("noexec", nonx_setup);
-
-int force_personality32;
-
-/* noexec32=on|off
-Control non executable heap for 32bit processes.
-To control the stack too use noexec=off
-
-on	PROT_READ does not imply PROT_EXEC for 32bit processes (default)
-off	PROT_READ implies PROT_EXEC
-*/
-static int __init nonx32_setup(char *str)
-{
-	if (!strcmp(str, "on"))
-		force_personality32 &= ~READ_IMPLIES_EXEC;
-	else if (!strcmp(str, "off"))
-		force_personality32 |= READ_IMPLIES_EXEC;
-	return 1;
-}
-__setup("noexec32=", nonx32_setup);
-
-void pda_init(int cpu)
-{
-	struct x8664_pda *pda = cpu_pda(cpu);
-
-	/* Setup up data that may be needed in __get_free_pages early */
-	loadsegment(fs, 0);
-	loadsegment(gs, 0);
-	/* Memory clobbers used to order PDA accessed */
-	mb();
-	wrmsrl(MSR_GS_BASE, pda);
-	mb();
-
-	pda->cpunumber = cpu;
-	pda->irqcount = -1;
-	pda->kernelstack = (unsigned long)stack_thread_info() -
-				 PDA_STACKOFFSET + THREAD_SIZE;
-	pda->active_mm = &init_mm;
-	pda->mmu_state = 0;
-
-	if (cpu == 0) {
-		/* others are initialized in smpboot.c */
-		pda->pcurrent = &init_task;
-		pda->irqstackptr = boot_cpu_stack;
-		pda->irqstackptr += IRQSTACKSIZE - 64;
-	} else {
-		if (!pda->irqstackptr) {
-			pda->irqstackptr = (char *)
-				__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-			if (!pda->irqstackptr)
-				panic("cannot allocate irqstack for cpu %d",
-				      cpu);
-			pda->irqstackptr += IRQSTACKSIZE - 64;
-		}
-
-		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
-			pda->nodenumber = cpu_to_node(cpu);
-	}
-}
-
-char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
-			   DEBUG_STKSZ] __page_aligned_bss;
-
-extern asmlinkage void ignore_sysret(void);
-
-/* May not be marked __init: used by software suspend */
-void syscall_init(void)
-{
-	/*
-	 * LSTAR and STAR live in a bit strange symbiosis.
-	 * They both write to the same internal register. STAR allows to
-	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
-	 */
-	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32);
-	wrmsrl(MSR_LSTAR, system_call);
-	wrmsrl(MSR_CSTAR, ignore_sysret);
-
-#ifdef CONFIG_IA32_EMULATION
-	syscall32_cpu_init();
-#endif
-
-	/* Flags to clear on syscall */
-	wrmsrl(MSR_SYSCALL_MASK,
-	       X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
-}
-
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer);
-	if (!(efer & EFER_NX) || do_not_nx)
-		__supported_pte_mask &= ~_PAGE_NX;
-}
-
-unsigned long kernel_eflags;
-
-/*
- * Copies of the original ist values from the tss are only accessed during
- * debugging, no special alignment required.
- */
-DEFINE_PER_CPU(struct orig_ist, orig_ist);
-
-/*
- * cpu_init() initializes state that is per-CPU. Some data is already
- * initialized (naturally) in the bootstrap process, such as the GDT
- * and IDT. We reload them nevertheless, this function acts as a
- * 'CPU state barrier', nothing should get across.
- * A lot of state is already set up in PDA init.
- */
-void __cpuinit cpu_init(void)
-{
-	int cpu = stack_smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
-	unsigned long v;
-	char *estacks = NULL;
-	struct task_struct *me;
-	int i;
-
-	/* CPU 0 is initialised in head64.c */
-	if (cpu != 0)
-		pda_init(cpu);
-	else
-		estacks = boot_exception_stacks;
-
-	me = current;
-
-	if (cpu_test_and_set(cpu, cpu_initialized))
-		panic("CPU#%d already initialized!\n", cpu);
-
-	printk(KERN_INFO "Initializing CPU#%d\n", cpu);
-
-	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-
-	/*
-	 * Initialize the per-CPU GDT with the boot GDT,
-	 * and set up the GDT descriptor:
-	 */
-
-	switch_to_new_gdt();
-	load_idt((const struct desc_ptr *)&idt_descr);
-
-	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
-	syscall_init();
-
-	wrmsrl(MSR_FS_BASE, 0);
-	wrmsrl(MSR_KERNEL_GS_BASE, 0);
-	barrier();
-
-	check_efer();
-
-	/*
-	 * set up and load the per-CPU TSS
-	 */
-	if (!orig_ist->ist[0]) {
-		static const unsigned int order[N_EXCEPTION_STACKS] = {
-		  [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-		  [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
-		};
-		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
-			if (cpu) {
-				estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-				if (!estacks)
-					panic("Cannot allocate exception "
-					      "stack %ld %d\n", v, cpu);
-			}
-			estacks += PAGE_SIZE << order[v];
-			orig_ist->ist[v] = t->x86_tss.ist[v] =
-					(unsigned long)estacks;
-		}
-	}
-
-	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
-	/*
-	 * <= is required because the CPU will access up to
-	 * 8 bits beyond the end of the IO permission bitmap.
-	 */
-	for (i = 0; i <= IO_BITMAP_LONGS; i++)
-		t->io_bitmap[i] = ~0UL;
-
-	atomic_inc(&init_mm.mm_count);
-	me->active_mm = &init_mm;
-	if (me->mm)
-		BUG();
-	enter_lazy_tlb(&init_mm, me);
-
-	load_sp0(t, &current->thread);
-	set_tss_desc(cpu, t);
-	load_TR_desc();
-	load_LDT(&init_mm.context);
-
-#ifdef CONFIG_KGDB
-	/*
-	 * If the kgdb is connected no debug regs should be altered.  This
-	 * is only applicable when KGDB and a KGDB I/O module are built
-	 * into the kernel and you are using early debugging with
-	 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
-	 */
-	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
-		arch_kgdb_ops.correct_hw_break();
-	else {
-#endif
-	/*
-	 * Clear all 6 debug registers:
-	 */
-
-	set_debugreg(0UL, 0);
-	set_debugreg(0UL, 1);
-	set_debugreg(0UL, 2);
-	set_debugreg(0UL, 3);
-	set_debugreg(0UL, 6);
-	set_debugreg(0UL, 7);
-#ifdef CONFIG_KGDB
-	/* If the kgdb is connected no debug regs should be altered. */
-	}
-#endif
-
-	fpu_init();
-
-	raw_local_save_flags(kernel_eflags);
-
-	if (is_uv_system())
-		uv_cpu_init();
-}
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 4d894e8..de4094a 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -21,23 +21,16 @@ struct cpu_dev {
 	void		(*c_init)(struct cpuinfo_x86 * c);
 	void		(*c_identify)(struct cpuinfo_x86 * c);
 	unsigned int	(*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
+	int	c_x86_vendor;
 };
 
-extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
+#define cpu_dev_register(cpu_devX) \
+	static struct cpu_dev *__cpu_dev_##cpu_devX __used \
+	__attribute__((__section__(".x86_cpu_dev.init"))) = \
+	&cpu_devX;
 
-struct cpu_vendor_dev {
-	int vendor;
-	struct cpu_dev *cpu_dev;
-};
-
-#define cpu_vendor_dev_register(cpu_vendor_id, cpu_dev) \
-	static struct cpu_vendor_dev __cpu_vendor_dev_##cpu_vendor_id __used \
-	__attribute__((__section__(".x86cpuvendor.init"))) = \
-	{ cpu_vendor_id, cpu_dev }
-
-extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[];
+extern struct cpu_dev *__x86_cpu_dev_start[], *__x86_cpu_dev_end[];
 
-extern int get_model_name(struct cpuinfo_x86 *c);
 extern void display_cacheinfo(struct cpuinfo_x86 *c);
 
 #endif
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index dd097b8..8e48c5d 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -256,7 +256,8 @@ static u32 get_cur_val(const cpumask_t *mask)
  * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and
  * no meaning should be associated with absolute values of these MSRs.
  */
-static unsigned int get_measured_perf(unsigned int cpu)
+static unsigned int get_measured_perf(struct cpufreq_policy *policy,
+				      unsigned int cpu)
 {
 	union {
 		struct {
@@ -326,7 +327,7 @@ static unsigned int get_measured_perf(unsigned int cpu)
 
 #endif
 
-	retval = per_cpu(drv_data, cpu)->max_freq * perf_percent / 100;
+	retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100;
 
 	put_cpu();
 	set_cpus_allowed_ptr(current, &saved_mask);
@@ -779,13 +780,20 @@ static int __init acpi_cpufreq_init(void)
 {
 	int ret;
 
+	if (acpi_disabled)
+		return 0;
+
 	dprintk("acpi_cpufreq_init\n");
 
 	ret = acpi_cpufreq_early_init();
 	if (ret)
 		return ret;
 
-	return cpufreq_register_driver(&acpi_cpufreq_driver);
+	ret = cpufreq_register_driver(&acpi_cpufreq_driver);
+	if (ret)
+		free_percpu(acpi_perf_data);
+
+	return ret;
 }
 
 static void __exit acpi_cpufreq_exit(void)
@@ -795,8 +803,6 @@ static void __exit acpi_cpufreq_exit(void)
 	cpufreq_unregister_driver(&acpi_cpufreq_driver);
 
 	free_percpu(acpi_perf_data);
-
-	return;
 }
 
 module_param(acpi_pstate_strict, uint, 0644);
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
index e4a4bf8..fe613c9 100644
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
@@ -25,8 +25,8 @@
 #include <linux/cpufreq.h>
 
 #include <asm/msr.h>
-#include <asm/timex.h>
-#include <asm/io.h>
+#include <linux/timex.h>
+#include <linux/io.h>
 
 #define REG_CSCIR 0x22		/* Chip Setup and Control Index Register    */
 #define REG_CSCDR 0x23		/* Chip Setup and Control Data  Register    */
@@ -82,7 +82,7 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
 	u8 clockspeed_reg;    /* Clock Speed Register */
 
 	local_irq_disable();
-	outb_p(0x80,REG_CSCIR);
+	outb_p(0x80, REG_CSCIR);
 	clockspeed_reg = inb_p(REG_CSCDR);
 	local_irq_enable();
 
@@ -98,10 +98,10 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
 	}
 
 	/* 33 MHz is not 32 MHz... */
-	if ((clockspeed_reg & 0xE0)==0xA0)
+	if ((clockspeed_reg & 0xE0) == 0xA0)
 		return 33000;
 
-	return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
+	return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
 }
 
 
@@ -117,7 +117,7 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
  *	There is no return value.
  */
 
-static void elanfreq_set_cpu_state (unsigned int state)
+static void elanfreq_set_cpu_state(unsigned int state)
 {
 	struct cpufreq_freqs    freqs;
 
@@ -144,20 +144,20 @@ static void elanfreq_set_cpu_state (unsigned int state)
 	 */
 
 	local_irq_disable();
-	outb_p(0x40,REG_CSCIR);		/* Disable hyperspeed mode */
-	outb_p(0x00,REG_CSCDR);
+	outb_p(0x40, REG_CSCIR);		/* Disable hyperspeed mode */
+	outb_p(0x00, REG_CSCDR);
 	local_irq_enable();		/* wait till internal pipelines and */
 	udelay(1000);			/* buffers have cleaned up          */
 
 	local_irq_disable();
 
 	/* now, set the CPU clock speed register (0x80) */
-	outb_p(0x80,REG_CSCIR);
-	outb_p(elan_multiplier[state].val80h,REG_CSCDR);
+	outb_p(0x80, REG_CSCIR);
+	outb_p(elan_multiplier[state].val80h, REG_CSCDR);
 
 	/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
-	outb_p(0x40,REG_CSCIR);
-	outb_p(elan_multiplier[state].val40h,REG_CSCDR);
+	outb_p(0x40, REG_CSCIR);
+	outb_p(elan_multiplier[state].val40h, REG_CSCDR);
 	udelay(10000);
 	local_irq_enable();
 
@@ -173,12 +173,12 @@ static void elanfreq_set_cpu_state (unsigned int state)
  *	for the hardware supported by the driver.
  */
 
-static int elanfreq_verify (struct cpufreq_policy *policy)
+static int elanfreq_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
 }
 
-static int elanfreq_target (struct cpufreq_policy *policy,
+static int elanfreq_target(struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
 {
@@ -205,7 +205,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
 
 	/* capability check */
 	if ((c->x86_vendor != X86_VENDOR_AMD) ||
-	    (c->x86 != 4) || (c->x86_model!=10))
+	    (c->x86 != 4) || (c->x86_model != 10))
 		return -ENODEV;
 
 	/* max freq */
@@ -213,7 +213,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
 		max_freq = elanfreq_get_cpu_frequency(0);
 
 	/* table init */
-	for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+	for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
 		if (elanfreq_table[i].frequency > max_freq)
 			elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
 	}
@@ -224,7 +224,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
 
 	result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
 	if (result)
-		return (result);
+		return result;
 
 	cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
 	return 0;
@@ -260,7 +260,7 @@ __setup("elanfreq=", elanfreq_setup);
 #endif
 
 
-static struct freq_attr* elanfreq_attr[] = {
+static struct freq_attr *elanfreq_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -284,9 +284,9 @@ static int __init elanfreq_init(void)
 
 	/* Test if we have the right hardware */
 	if ((c->x86_vendor != X86_VENDOR_AMD) ||
-		(c->x86 != 4) || (c->x86_model!=10)) {
+		(c->x86 != 4) || (c->x86_model != 10)) {
 		printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
-                return -ENODEV;
+		return -ENODEV;
 	}
 	return cpufreq_register_driver(&elanfreq_driver);
 }
@@ -298,7 +298,7 @@ static void __exit elanfreq_exit(void)
 }
 
 
-module_param (max_freq, int, 0444);
+module_param(max_freq, int, 0444);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index 06fcce5..b046185 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
@@ -1,5 +1,5 @@
 /*
- *  (C) 2001-2004  Dave Jones. <davej@codemonkey.org.uk>
+ *  (C) 2001-2004  Dave Jones. <davej@redhat.com>
  *  (C) 2002  Padraig Brady. <padraig@antefacto.com>
  *
  *  Licensed under the terms of the GNU GPL License version 2.
@@ -1019,7 +1019,7 @@ MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
 module_param(revid_errata, int, 0644);
 MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
 
-MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
+MODULE_AUTHOR ("Dave Jones <davej@redhat.com>");
 MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
 MODULE_LICENSE ("GPL");
 
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index f1685fb..b8e05ee 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -171,7 +171,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 	}
 
 	if (c->x86 != 0xF) {
-		printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n");
+		printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@vger.kernel.org>\n");
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
index eb9b62b..c1ac579 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
@@ -15,12 +15,11 @@
 #include <linux/slab.h>
 
 #include <asm/msr.h>
-#include <asm/timex.h>
-#include <asm/io.h>
+#include <linux/timex.h>
+#include <linux/io.h>
 
-
-#define POWERNOW_IOPORT 0xfff0         /* it doesn't matter where, as long
-					  as it is unused */
+#define POWERNOW_IOPORT 0xfff0          /* it doesn't matter where, as long
+					   as it is unused */
 
 static unsigned int                     busfreq;   /* FSB, in 10 kHz */
 static unsigned int                     max_multiplier;
@@ -53,7 +52,7 @@ static int powernow_k6_get_cpu_multiplier(void)
 
 	msrval = POWERNOW_IOPORT + 0x1;
 	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
-	invalue=inl(POWERNOW_IOPORT + 0x8);
+	invalue = inl(POWERNOW_IOPORT + 0x8);
 	msrval = POWERNOW_IOPORT + 0x0;
 	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
 
@@ -67,9 +66,9 @@ static int powernow_k6_get_cpu_multiplier(void)
  *
  *   Tries to change the PowerNow! multiplier
  */
-static void powernow_k6_set_state (unsigned int best_i)
+static void powernow_k6_set_state(unsigned int best_i)
 {
-	unsigned long           outvalue=0, invalue=0;
+	unsigned long           outvalue = 0, invalue = 0;
 	unsigned long           msrval;
 	struct cpufreq_freqs    freqs;
 
@@ -90,10 +89,10 @@ static void powernow_k6_set_state (unsigned int best_i)
 
 	msrval = POWERNOW_IOPORT + 0x1;
 	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
-	invalue=inl(POWERNOW_IOPORT + 0x8);
+	invalue = inl(POWERNOW_IOPORT + 0x8);
 	invalue = invalue & 0xf;
 	outvalue = outvalue | invalue;
-	outl(outvalue ,(POWERNOW_IOPORT + 0x8));
+	outl(outvalue , (POWERNOW_IOPORT + 0x8));
 	msrval = POWERNOW_IOPORT + 0x0;
 	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
 
@@ -124,7 +123,7 @@ static int powernow_k6_verify(struct cpufreq_policy *policy)
  *
  * sets a new CPUFreq policy
  */
-static int powernow_k6_target (struct cpufreq_policy *policy,
+static int powernow_k6_target(struct cpufreq_policy *policy,
 			       unsigned int target_freq,
 			       unsigned int relation)
 {
@@ -152,7 +151,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 	busfreq = cpu_khz / max_multiplier;
 
 	/* table init */
-	for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+	for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
 		if (clock_ratio[i].index > max_multiplier)
 			clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
 		else
@@ -165,7 +164,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 
 	result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio);
 	if (result)
-		return (result);
+		return result;
 
 	cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu);
 
@@ -176,8 +175,8 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
 {
 	unsigned int i;
-	for (i=0; i<8; i++) {
-		if (i==max_multiplier)
+	for (i = 0; i < 8; i++) {
+		if (i == max_multiplier)
 			powernow_k6_set_state(i);
 	}
 	cpufreq_frequency_table_put_attr(policy->cpu);
@@ -189,7 +188,7 @@ static unsigned int powernow_k6_get(unsigned int cpu)
 	return busfreq * powernow_k6_get_cpu_multiplier();
 }
 
-static struct freq_attr* powernow_k6_attr[] = {
+static struct freq_attr *powernow_k6_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -227,7 +226,7 @@ static int __init powernow_k6_init(void)
 	}
 
 	if (cpufreq_register_driver(&powernow_k6_driver)) {
-		release_region (POWERNOW_IOPORT, 16);
+		release_region(POWERNOW_IOPORT, 16);
 		return -EINVAL;
 	}
 
@@ -243,13 +242,13 @@ static int __init powernow_k6_init(void)
 static void __exit powernow_k6_exit(void)
 {
 	cpufreq_unregister_driver(&powernow_k6_driver);
-	release_region (POWERNOW_IOPORT, 16);
+	release_region(POWERNOW_IOPORT, 16);
 }
 
 
-MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
+MODULE_LICENSE("GPL");
 
 module_init(powernow_k6_init);
 module_exit(powernow_k6_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
index 0a61159..7c7d56b 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
@@ -1,6 +1,6 @@
 /*
  *  AMD K7 Powernow driver.
- *  (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs.
+ *  (C) 2003 Dave Jones on behalf of SuSE Labs.
  *  (C) 2003-2004 Dave Jones <davej@redhat.com>
  *
  *  Licensed under the terms of the GNU GPL License version 2.
@@ -692,7 +692,7 @@ static void __exit powernow_exit (void)
 module_param(acpi_force,  int, 0444);
 MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
 
-MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
+MODULE_AUTHOR ("Dave Jones <davej@redhat.com>");
 MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors.");
 MODULE_LICENSE ("GPL");
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 84bb395..d3dcd58 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -7,7 +7,7 @@
  *  Support : mark.langsdorf@amd.com
  *
  *  Based on the powernow-k7.c module written by Dave Jones.
- *  (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs
+ *  (C) 2003 Dave Jones on behalf of SuSE Labs
  *  (C) 2004 Dominik Brodowski <linux@brodo.de>
  *  (C) 2004 Pavel Machek <pavel@suse.cz>
  *  Licensed under the terms of the GNU GPL License version 2.
@@ -45,7 +45,6 @@
 #endif
 
 #define PFX "powernow-k8: "
-#define BFX PFX "BIOS error: "
 #define VERSION "version 2.20.00"
 #include "powernow-k8.h"
 
@@ -536,35 +535,40 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8
 
 	for (j = 0; j < data->numps; j++) {
 		if (pst[j].vid > LEAST_VID) {
-			printk(KERN_ERR PFX "vid %d invalid : 0x%x\n", j, pst[j].vid);
+			printk(KERN_ERR FW_BUG PFX "vid %d invalid : 0x%x\n",
+			       j, pst[j].vid);
 			return -EINVAL;
 		}
 		if (pst[j].vid < data->rvo) {	/* vid + rvo >= 0 */
-			printk(KERN_ERR BFX "0 vid exceeded with pstate %d\n", j);
+			printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate"
+			       " %d\n", j);
 			return -ENODEV;
 		}
 		if (pst[j].vid < maxvid + data->rvo) {	/* vid + rvo >= maxvid */
-			printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j);
+			printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate"
+			       " %d\n", j);
 			return -ENODEV;
 		}
 		if (pst[j].fid > MAX_FID) {
-			printk(KERN_ERR BFX "maxfid exceeded with pstate %d\n", j);
+			printk(KERN_ERR FW_BUG PFX "maxfid exceeded with pstate"
+			       " %d\n", j);
 			return -ENODEV;
 		}
 		if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
 			/* Only first fid is allowed to be in "low" range */
-			printk(KERN_ERR BFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
+			printk(KERN_ERR FW_BUG PFX "two low fids - %d : "
+			       "0x%x\n", j, pst[j].fid);
 			return -EINVAL;
 		}
 		if (pst[j].fid < lastfid)
 			lastfid = pst[j].fid;
 	}
 	if (lastfid & 1) {
-		printk(KERN_ERR BFX "lastfid invalid\n");
+		printk(KERN_ERR FW_BUG PFX "lastfid invalid\n");
 		return -EINVAL;
 	}
 	if (lastfid > LO_FID_TABLE_TOP)
-		printk(KERN_INFO BFX  "first fid not from lo freq table\n");
+		printk(KERN_INFO FW_BUG PFX  "first fid not from lo freq table\n");
 
 	return 0;
 }
@@ -672,13 +676,13 @@ static int find_psb_table(struct powernow_k8_data *data)
 
 		dprintk("table vers: 0x%x\n", psb->tableversion);
 		if (psb->tableversion != PSB_VERSION_1_4) {
-			printk(KERN_ERR BFX "PSB table is not v1.4\n");
+			printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n");
 			return -ENODEV;
 		}
 
 		dprintk("flags: 0x%x\n", psb->flags1);
 		if (psb->flags1) {
-			printk(KERN_ERR BFX "unknown flags\n");
+			printk(KERN_ERR FW_BUG PFX "unknown flags\n");
 			return -ENODEV;
 		}
 
@@ -705,7 +709,7 @@ static int find_psb_table(struct powernow_k8_data *data)
 			}
 		}
 		if (cpst != 1) {
-			printk(KERN_ERR BFX "numpst must be 1\n");
+			printk(KERN_ERR FW_BUG PFX "numpst must be 1\n");
 			return -ENODEV;
 		}
 
@@ -1130,17 +1134,19 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 			       "ACPI Processor module before starting this "
 			       "driver.\n");
 #else
-			printk(KERN_ERR PFX "Your BIOS does not provide ACPI "
-			       "_PSS objects in a way that Linux understands. "
-			       "Please report this to the Linux ACPI maintainers"
-			       " and complain to your BIOS vendor.\n");
+			printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide"
+			       " ACPI _PSS objects in a way that Linux "
+			       "understands. Please report this to the Linux "
+			       "ACPI maintainers and complain to your BIOS "
+			       "vendor.\n");
 #endif
 			kfree(data);
 			return -ENODEV;
 		}
 		if (pol->cpu != 0) {
-			printk(KERN_ERR PFX "No ACPI _PSS objects for CPU other than "
-			       "CPU0. Complain to your BIOS vendor.\n");
+			printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
+			       "CPU other than CPU0. Complain to your BIOS "
+			       "vendor.\n");
 			kfree(data);
 			return -ENODEV;
 		}
@@ -1193,7 +1199,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	/* min/max the cpu is capable of */
 	if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {
-		printk(KERN_ERR PFX "invalid powernow_table\n");
+		printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n");
 		powernow_k8_cpu_exit_acpi(data);
 		kfree(data->powernow_table);
 		kfree(data);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 15e13c0..3b5f064 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -26,7 +26,7 @@
 #include <asm/cpufeature.h>
 
 #define PFX		"speedstep-centrino: "
-#define MAINTAINER	"cpufreq@lists.linux.org.uk"
+#define MAINTAINER	"cpufreq@vger.kernel.org"
 
 #define dprintk(msg...) \
 	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 191f726..04d0376 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -431,7 +431,7 @@ static void __exit speedstep_exit(void)
 }
 
 
-MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
+MODULE_AUTHOR ("Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>");
 MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
 MODULE_LICENSE ("GPL");
 
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 898a5a2..ffd0f5e 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -121,7 +121,7 @@ static void __cpuinit set_cx86_reorder(void)
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
 
 	/* Load/Store Serialize to mem access disable (=reorder it) */
-	setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+	setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80);
 	/* set load/store serialize from 1GB to 4GB */
 	ccr3 |= 0xe0;
 	setCx86(CX86_CCR3, ccr3);
@@ -132,11 +132,11 @@ static void __cpuinit set_cx86_memwb(void)
 	printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
 
 	/* CCR2 bit 2: unlock NW bit */
-	setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+	setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
 	/* set 'Not Write-through' */
 	write_cr0(read_cr0() | X86_CR0_NW);
 	/* CCR2 bit 2: lock NW bit and set WT1 */
-	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
+	setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14);
 }
 
 /*
@@ -150,14 +150,14 @@ static void __cpuinit geode_configure(void)
 	local_irq_save(flags);
 
 	/* Suspend on halt power saving and enable #SUSP pin */
-	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+	setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88);
 
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* enable MAPEN */
 
 
 	/* FPU fast, DTE cache, Mem bypass */
-	setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
+	setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38);
 	setCx86(CX86_CCR3, ccr3);			/* disable MAPEN */
 
 	set_cx86_memwb();
@@ -291,7 +291,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		/* GXm supports extended cpuid levels 'ala' AMD */
 		if (c->cpuid_level == 2) {
 			/* Enable cxMMX extensions (GX1 Datasheet 54) */
-			setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
+			setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1);
 
 			/*
 			 * GXm : 0x30 ... 0x5f GXm  datasheet 51
@@ -301,7 +301,6 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 			 */
 			if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
 				geode_configure();
-			get_model_name(c);  /* get CPU marketing name */
 			return;
 		} else { /* MediaGX */
 			Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
@@ -314,7 +313,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		if (dir1 > 7) {
 			dir0_msn++;  /* M II */
 			/* Enable MMX extensions (App note 108) */
-			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+			setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1);
 		} else {
 			c->coma_bug = 1;      /* 6x86MX, it has the bug. */
 		}
@@ -429,7 +428,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 			local_irq_save(flags);
 			ccr3 = getCx86(CX86_CCR3);
 			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);       /* enable MAPEN  */
-			setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80);  /* enable cpuid  */
+			setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);  /* enable cpuid  */
 			setCx86(CX86_CCR3, ccr3);                       /* disable MAPEN */
 			local_irq_restore(flags);
 		}
@@ -442,14 +441,16 @@ static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
 	.c_early_init	= early_init_cyrix,
 	.c_init		= init_cyrix,
 	.c_identify	= cyrix_identify,
+	.c_x86_vendor	= X86_VENDOR_CYRIX,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev);
+cpu_dev_register(cyrix_cpu_dev);
 
 static struct cpu_dev nsc_cpu_dev __cpuinitdata = {
 	.c_vendor	= "NSC",
 	.c_ident	= { "Geode by NSC" },
 	.c_init		= init_nsc,
+	.c_x86_vendor	= X86_VENDOR_NSC,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev);
+cpu_dev_register(nsc_cpu_dev);
diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c
deleted file mode 100644
index c901779..0000000
--- a/arch/x86/kernel/cpu/feature_names.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Strings for the various x86 capability flags.
- *
- * This file must not contain any executable code.
- */
-
-#include <asm/cpufeature.h>
-
-/*
- * These flag bits must match the definitions in <asm/cpufeature.h>.
- * NULL means this bit is undefined or reserved; either way it doesn't
- * have meaning as far as Linux is concerned.  Note that it's important
- * to realize there is a difference between this table and CPUID -- if
- * applications want to get the raw CPUID data, they should access
- * /dev/cpu/<cpu_nr>/cpuid instead.
- */
-const char * const x86_cap_flags[NCAPINTS*32] = {
-	/* Intel-defined */
-	"fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
-	"cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
-	"pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
-	"fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
-
-	/* AMD-defined */
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
-	NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
-	"3dnowext", "3dnow",
-
-	/* Transmeta-defined */
-	"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* Other (Linux-defined) */
-	"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
-	NULL, NULL, NULL, NULL,
-	"constant_tsc", "up", NULL, "arch_perfmon",
-	"pebs", "bts", NULL, NULL,
-	"rep_good", NULL, NULL, NULL,
-	"nopl", NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* Intel-defined (#2) */
-	"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
-	"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
-	NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* VIA/Cyrix/Centaur-defined */
-	NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
-	"ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* AMD-defined (#2) */
-	"lahf_lm", "cmp_legacy", "svm", "extapic",
-	"cr8_legacy", "abm", "sse4a", "misalignsse",
-	"3dnowprefetch", "osvw", "ibs", "sse5",
-	"skinit", "wdt", NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-	/* Auxiliary (Linux-defined) */
-	"ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-};
-
-const char *const x86_power_flags[32] = {
-	"ts",	/* temperature sensor */
-	"fid",  /* frequency id control */
-	"vid",  /* voltage id control */
-	"ttp",  /* thermal trip */
-	"tm",
-	"stc",
-	"100mhzsteps",
-	"hwpstate",
-	"",	/* tsc invariant mapped to constant_tsc */
-		/* nothing */
-};
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index b75f256..cce0b61 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -15,6 +15,11 @@
 #include <asm/ds.h>
 #include <asm/bugs.h>
 
+#ifdef CONFIG_X86_64
+#include <asm/topology.h>
+#include <asm/numa_64.h>
+#endif
+
 #include "cpu.h"
 
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -23,23 +28,22 @@
 #include <mach_apic.h>
 #endif
 
-#ifdef CONFIG_X86_INTEL_USERCOPY
-/*
- * Alignment at which movsl is preferred for bulk memory copies.
- */
-struct movsl_mask movsl_mask __read_mostly;
-#endif
-
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
-	/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
-	if (c->x86 == 15 && c->x86_cache_alignment == 64)
-		c->x86_cache_alignment = 128;
 	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
 		(c->x86 == 0x6 && c->x86_model >= 0x0e))
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+#ifdef CONFIG_X86_64
+	set_cpu_cap(c, X86_FEATURE_SYSENTER32);
+#else
+	/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
+	if (c->x86 == 15 && c->x86_cache_alignment == 64)
+		c->x86_cache_alignment = 128;
+#endif
 }
 
+#ifdef CONFIG_X86_32
 /*
  *	Early probe support logic for ppro memory erratum #50
  *
@@ -59,15 +63,54 @@ int __cpuinit ppro_with_ram_bug(void)
 	return 0;
 }
 
+#ifdef CONFIG_X86_F00F_BUG
+static void __cpuinit trap_init_f00f_bug(void)
+{
+	__set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);
 
-/*
- * P4 Xeon errata 037 workaround.
- * Hardware prefetcher may cause stale data to be loaded into the cache.
- */
-static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c)
+	/*
+	 * Update the IDT descriptor and reload the IDT so that
+	 * it uses the read-only mapped virtual address.
+	 */
+	idt_descr.address = fix_to_virt(FIX_F00F_IDT);
+	load_idt(&idt_descr);
+}
+#endif
+
+static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
 {
 	unsigned long lo, hi;
 
+#ifdef CONFIG_X86_F00F_BUG
+	/*
+	 * All current models of Pentium and Pentium with MMX technology CPUs
+	 * have the F0 0F bug, which lets nonprivileged users lock up the system.
+	 * Note that the workaround only should be initialized once...
+	 */
+	c->f00f_bug = 0;
+	if (!paravirt_enabled() && c->x86 == 5) {
+		static int f00f_workaround_enabled;
+
+		c->f00f_bug = 1;
+		if (!f00f_workaround_enabled) {
+			trap_init_f00f_bug();
+			printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
+			f00f_workaround_enabled = 1;
+		}
+	}
+#endif
+
+	/*
+	 * SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until
+	 * model 3 mask 3
+	 */
+	if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
+		clear_cpu_cap(c, X86_FEATURE_SEP);
+
+	/*
+	 * P4 Xeon errata 037 workaround.
+	 * Hardware prefetcher may cause stale data to be loaded into the cache.
+	 */
 	if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
 		rdmsr(MSR_IA32_MISC_ENABLE, lo, hi);
 		if ((lo & (1<<9)) == 0) {
@@ -77,13 +120,68 @@ static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c)
 			wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
 		}
 	}
+
+	/*
+	 * See if we have a good local APIC by checking for buggy Pentia,
+	 * i.e. all B steppings and the C2 stepping of P54C when using their
+	 * integrated APIC (see 11AP erratum in "Pentium Processor
+	 * Specification Update").
+	 */
+	if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
+	    (c->x86_mask < 0x6 || c->x86_mask == 0xb))
+		set_cpu_cap(c, X86_FEATURE_11AP);
+
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+	/*
+	 * Set up the preferred alignment for movsl bulk memory moves
+	 */
+	switch (c->x86) {
+	case 4:		/* 486: untested */
+		break;
+	case 5:		/* Old Pentia: untested */
+		break;
+	case 6:		/* PII/PIII only like movsl with 8-byte alignment */
+		movsl_mask.mask = 7;
+		break;
+	case 15:	/* P4 is OK down to 8-byte alignment */
+		movsl_mask.mask = 7;
+		break;
+	}
+#endif
+
+#ifdef CONFIG_X86_NUMAQ
+	numaq_tsc_disable();
+#endif
 }
+#else
+static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
+{
+}
+#endif
 
+static void __cpuinit srat_detect_node(void)
+{
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+	unsigned node;
+	int cpu = smp_processor_id();
+	int apicid = hard_smp_processor_id();
+
+	/* Don't do the funky fallback heuristics the AMD version employs
+	   for now. */
+	node = apicid_to_node[apicid];
+	if (node == NUMA_NO_NODE || !node_online(node))
+		node = first_node(node_online_map);
+	numa_set_node(cpu, node);
+
+	printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
+#endif
+}
 
 /*
  * find out the number of processor cores on the die
  */
-static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c)
+static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
 {
 	unsigned int eax, ebx, ecx, edx;
 
@@ -98,45 +196,51 @@ static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c)
 		return 1;
 }
 
-#ifdef CONFIG_X86_F00F_BUG
-static void __cpuinit trap_init_f00f_bug(void)
+static void __cpuinit detect_vmx_virtcap(struct cpuinfo_x86 *c)
 {
-	__set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);
-
-	/*
-	 * Update the IDT descriptor and reload the IDT so that
-	 * it uses the read-only mapped virtual address.
-	 */
-	idt_descr.address = fix_to_virt(FIX_F00F_IDT);
-	load_idt(&idt_descr);
+	/* Intel VMX MSR indicated features */
+#define X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW	0x00200000
+#define X86_VMX_FEATURE_PROC_CTLS_VNMI		0x00400000
+#define X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS	0x80000000
+#define X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC	0x00000001
+#define X86_VMX_FEATURE_PROC_CTLS2_EPT		0x00000002
+#define X86_VMX_FEATURE_PROC_CTLS2_VPID		0x00000020
+
+	u32 vmx_msr_low, vmx_msr_high, msr_ctl, msr_ctl2;
+
+	clear_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
+	clear_cpu_cap(c, X86_FEATURE_VNMI);
+	clear_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
+	clear_cpu_cap(c, X86_FEATURE_EPT);
+	clear_cpu_cap(c, X86_FEATURE_VPID);
+
+	rdmsr(MSR_IA32_VMX_PROCBASED_CTLS, vmx_msr_low, vmx_msr_high);
+	msr_ctl = vmx_msr_high | vmx_msr_low;
+	if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW)
+		set_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
+	if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_VNMI)
+		set_cpu_cap(c, X86_FEATURE_VNMI);
+	if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS) {
+		rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2,
+		      vmx_msr_low, vmx_msr_high);
+		msr_ctl2 = vmx_msr_high | vmx_msr_low;
+		if ((msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC) &&
+		    (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW))
+			set_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
+		if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_EPT)
+			set_cpu_cap(c, X86_FEATURE_EPT);
+		if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VPID)
+			set_cpu_cap(c, X86_FEATURE_VPID);
+	}
 }
-#endif
 
 static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 {
 	unsigned int l2 = 0;
-	char *p = NULL;
 
 	early_init_intel(c);
 
-#ifdef CONFIG_X86_F00F_BUG
-	/*
-	 * All current models of Pentium and Pentium with MMX technology CPUs
-	 * have the F0 0F bug, which lets nonprivileged users lock up the system.
-	 * Note that the workaround only should be initialized once...
-	 */
-	c->f00f_bug = 0;
-	if (!paravirt_enabled() && c->x86 == 5) {
-		static int f00f_workaround_enabled;
-
-		c->f00f_bug = 1;
-		if (!f00f_workaround_enabled) {
-			trap_init_f00f_bug();
-			printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
-			f00f_workaround_enabled = 1;
-		}
-	}
-#endif
+	intel_workarounds(c);
 
 	l2 = init_intel_cacheinfo(c);
 	if (c->cpuid_level > 9) {
@@ -146,16 +250,32 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
 	}
 
-	/* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */
-	if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
-		clear_cpu_cap(c, X86_FEATURE_SEP);
+	if (cpu_has_xmm2)
+		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
+	if (cpu_has_ds) {
+		unsigned int l1;
+		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
+		if (!(l1 & (1<<11)))
+			set_cpu_cap(c, X86_FEATURE_BTS);
+		if (!(l1 & (1<<12)))
+			set_cpu_cap(c, X86_FEATURE_PEBS);
+		ds_init_intel(c);
+	}
 
+#ifdef CONFIG_X86_64
+	if (c->x86 == 15)
+		c->x86_cache_alignment = c->x86_clflush_size * 2;
+	if (c->x86 == 6)
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+#else
 	/*
 	 * Names for the Pentium II/Celeron processors
 	 * detectable only by also checking the cache size.
 	 * Dixon is NOT a Celeron.
 	 */
 	if (c->x86 == 6) {
+		char *p = NULL;
+
 		switch (c->x86_model) {
 		case 5:
 			if (c->x86_mask == 0) {
@@ -178,70 +298,41 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 				p = "Celeron (Coppermine)";
 			break;
 		}
-	}
-
-	if (p)
-		strcpy(c->x86_model_id, p);
-
-	c->x86_max_cores = num_cpu_cores(c);
-
-	detect_ht(c);
 
-	/* Work around errata */
-	Intel_errata_workarounds(c);
-
-#ifdef CONFIG_X86_INTEL_USERCOPY
-	/*
-	 * Set up the preferred alignment for movsl bulk memory moves
-	 */
-	switch (c->x86) {
-	case 4:		/* 486: untested */
-		break;
-	case 5:		/* Old Pentia: untested */
-		break;
-	case 6:		/* PII/PIII only like movsl with 8-byte alignment */
-		movsl_mask.mask = 7;
-		break;
-	case 15:	/* P4 is OK down to 8-byte alignment */
-		movsl_mask.mask = 7;
-		break;
+		if (p)
+			strcpy(c->x86_model_id, p);
 	}
-#endif
 
-	if (cpu_has_xmm2)
-		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-	if (c->x86 == 15) {
+	if (c->x86 == 15)
 		set_cpu_cap(c, X86_FEATURE_P4);
-	}
 	if (c->x86 == 6)
 		set_cpu_cap(c, X86_FEATURE_P3);
-	if (cpu_has_ds) {
-		unsigned int l1;
-		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
-		if (!(l1 & (1<<11)))
-			set_cpu_cap(c, X86_FEATURE_BTS);
-		if (!(l1 & (1<<12)))
-			set_cpu_cap(c, X86_FEATURE_PEBS);
-	}
 
 	if (cpu_has_bts)
-		ds_init_intel(c);
+		ptrace_bts_init_intel(c);
 
-	/*
-	 * See if we have a good local APIC by checking for buggy Pentia,
-	 * i.e. all B steppings and the C2 stepping of P54C when using their
-	 * integrated APIC (see 11AP erratum in "Pentium Processor
-	 * Specification Update").
-	 */
-	if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
-	    (c->x86_mask < 0x6 || c->x86_mask == 0xb))
-		set_cpu_cap(c, X86_FEATURE_11AP);
+#endif
 
-#ifdef CONFIG_X86_NUMAQ
-	numaq_tsc_disable();
+	detect_extended_topology(c);
+	if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) {
+		/*
+		 * let's use the legacy cpuid vector 0x1 and 0x4 for topology
+		 * detection.
+		 */
+		c->x86_max_cores = intel_num_cpu_cores(c);
+#ifdef CONFIG_X86_32
+		detect_ht(c);
 #endif
+	}
+
+	/* Work around errata */
+	srat_detect_node();
+
+	if (cpu_has(c, X86_FEATURE_VMX))
+		detect_vmx_virtcap(c);
 }
 
+#ifdef CONFIG_X86_32
 static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 {
 	/*
@@ -254,10 +345,12 @@ static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned i
 		size = 256;
 	return size;
 }
+#endif
 
 static struct cpu_dev intel_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Intel",
 	.c_ident	= { "GenuineIntel" },
+#ifdef CONFIG_X86_32
 	.c_models = {
 		{ .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
 		  {
@@ -307,76 +400,12 @@ static struct cpu_dev intel_cpu_dev __cpuinitdata = {
 		  }
 		},
 	},
+	.c_size_cache	= intel_size_cache,
+#endif
 	.c_early_init   = early_init_intel,
 	.c_init		= init_intel,
-	.c_size_cache	= intel_size_cache,
+	.c_x86_vendor	= X86_VENDOR_INTEL,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
-
-#ifndef CONFIG_X86_CMPXCHG
-unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
-{
-	u8 prev;
-	unsigned long flags;
-
-	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
-	local_irq_save(flags);
-	prev = *(u8 *)ptr;
-	if (prev == old)
-		*(u8 *)ptr = new;
-	local_irq_restore(flags);
-	return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u8);
-
-unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new)
-{
-	u16 prev;
-	unsigned long flags;
-
-	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
-	local_irq_save(flags);
-	prev = *(u16 *)ptr;
-	if (prev == old)
-		*(u16 *)ptr = new;
-	local_irq_restore(flags);
-	return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u16);
-
-unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
-{
-	u32 prev;
-	unsigned long flags;
-
-	/* Poor man's cmpxchg for 386. Unsuitable for SMP */
-	local_irq_save(flags);
-	prev = *(u32 *)ptr;
-	if (prev == old)
-		*(u32 *)ptr = new;
-	local_irq_restore(flags);
-	return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u32);
-#endif
-
-#ifndef CONFIG_X86_CMPXCHG64
-unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
-{
-	u64 prev;
-	unsigned long flags;
-
-	/* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
-	local_irq_save(flags);
-	prev = *(u64 *)ptr;
-	if (prev == old)
-		*(u64 *)ptr = new;
-	local_irq_restore(flags);
-	return prev;
-}
-EXPORT_SYMBOL(cmpxchg_486_u64);
-#endif
-
-/* arch_initcall(intel_cpu_init); */
+cpu_dev_register(intel_cpu_dev);
 
diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c
deleted file mode 100644
index 1019c58..0000000
--- a/arch/x86/kernel/cpu/intel_64.c
+++ /dev/null
@@ -1,95 +0,0 @@
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/processor.h>
-#include <asm/ptrace.h>
-#include <asm/topology.h>
-#include <asm/numa_64.h>
-
-#include "cpu.h"
-
-static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
-{
-	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
-	    (c->x86 == 0x6 && c->x86_model >= 0x0e))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-
-	set_cpu_cap(c, X86_FEATURE_SYSENTER32);
-}
-
-/*
- * find out the number of processor cores on the die
- */
-static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
-{
-	unsigned int eax, t;
-
-	if (c->cpuid_level < 4)
-		return 1;
-
-	cpuid_count(4, 0, &eax, &t, &t, &t);
-
-	if (eax & 0x1f)
-		return ((eax >> 26) + 1);
-	else
-		return 1;
-}
-
-static void __cpuinit srat_detect_node(void)
-{
-#ifdef CONFIG_NUMA
-	unsigned node;
-	int cpu = smp_processor_id();
-	int apicid = hard_smp_processor_id();
-
-	/* Don't do the funky fallback heuristics the AMD version employs
-	   for now. */
-	node = apicid_to_node[apicid];
-	if (node == NUMA_NO_NODE || !node_online(node))
-		node = first_node(node_online_map);
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-}
-
-static void __cpuinit init_intel(struct cpuinfo_x86 *c)
-{
-	init_intel_cacheinfo(c);
-	if (c->cpuid_level > 9) {
-		unsigned eax = cpuid_eax(10);
-		/* Check for version and the number of counters */
-		if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
-			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
-	}
-
-	if (cpu_has_ds) {
-		unsigned int l1, l2;
-		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
-		if (!(l1 & (1<<11)))
-			set_cpu_cap(c, X86_FEATURE_BTS);
-		if (!(l1 & (1<<12)))
-			set_cpu_cap(c, X86_FEATURE_PEBS);
-	}
-
-
-	if (cpu_has_bts)
-		ds_init_intel(c);
-
-	if (c->x86 == 15)
-		c->x86_cache_alignment = c->x86_clflush_size * 2;
-	if (c->x86 == 6)
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-	c->x86_max_cores = intel_num_cpu_cores(c);
-
-	srat_detect_node();
-}
-
-static struct cpu_dev intel_cpu_dev __cpuinitdata = {
-	.c_vendor	= "Intel",
-	.c_ident	= { "GenuineIntel" },
-	.c_early_init   = early_init_intel,
-	.c_init		= init_intel,
-};
-cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
-
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 6b0a10b..3f46afb 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -1,8 +1,8 @@
 /*
- *      Routines to indentify caches on Intel CPU.
+ *	Routines to indentify caches on Intel CPU.
  *
- *      Changes:
- *      Venkatesh Pallipadi	: Adding cache identification through cpuid(4)
+ *	Changes:
+ *	Venkatesh Pallipadi	: Adding cache identification through cpuid(4)
  *		Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
  *	Andi Kleen / Andreas Herrmann	: CPUID4 emulation on AMD.
  */
@@ -13,6 +13,7 @@
 #include <linux/compiler.h>
 #include <linux/cpu.h>
 #include <linux/sched.h>
+#include <linux/pci.h>
 
 #include <asm/processor.h>
 #include <asm/smp.h>
@@ -130,9 +131,18 @@ struct _cpuid4_info {
 	union _cpuid4_leaf_ebx ebx;
 	union _cpuid4_leaf_ecx ecx;
 	unsigned long size;
+	unsigned long can_disable;
 	cpumask_t shared_cpu_map;	/* future?: only cpus/node is needed */
 };
 
+#ifdef CONFIG_PCI
+static struct pci_device_id k8_nb_id[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) },
+	{}
+};
+#endif
+
 unsigned short			num_cache_leaves;
 
 /* AMD doesn't have CPUID4. Emulate it here to report the same
@@ -182,9 +192,10 @@ static unsigned short assocs[] __cpuinitdata = {
 static unsigned char levels[] __cpuinitdata = { 1, 1, 2, 3 };
 static unsigned char types[] __cpuinitdata = { 1, 2, 3, 3 };
 
-static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
-		       union _cpuid4_leaf_ebx *ebx,
-		       union _cpuid4_leaf_ecx *ecx)
+static void __cpuinit
+amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
+		     union _cpuid4_leaf_ebx *ebx,
+		     union _cpuid4_leaf_ecx *ecx)
 {
 	unsigned dummy;
 	unsigned line_size, lines_per_tag, assoc, size_in_kb;
@@ -251,27 +262,40 @@ static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 		(ebx->split.ways_of_associativity + 1) - 1;
 }
 
-static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+static void __cpuinit
+amd_check_l3_disable(int index, struct _cpuid4_info *this_leaf)
+{
+	if (index < 3)
+		return;
+	this_leaf->can_disable = 1;
+}
+
+static int
+__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
 {
 	union _cpuid4_leaf_eax 	eax;
 	union _cpuid4_leaf_ebx 	ebx;
 	union _cpuid4_leaf_ecx 	ecx;
 	unsigned		edx;
 
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
 		amd_cpuid4(index, &eax, &ebx, &ecx);
-	else
-		cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full,  &edx);
+		if (boot_cpu_data.x86 >= 0x10)
+			amd_check_l3_disable(index, this_leaf);
+	} else {
+		cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx);
+	}
+
 	if (eax.split.type == CACHE_TYPE_NULL)
 		return -EIO; /* better error ? */
 
 	this_leaf->eax = eax;
 	this_leaf->ebx = ebx;
 	this_leaf->ecx = ecx;
-	this_leaf->size = (ecx.split.number_of_sets + 1) *
-		(ebx.split.coherency_line_size + 1) *
-		(ebx.split.physical_line_partition + 1) *
-		(ebx.split.ways_of_associativity + 1);
+	this_leaf->size = (ecx.split.number_of_sets          + 1) *
+			  (ebx.split.coherency_line_size     + 1) *
+			  (ebx.split.physical_line_partition + 1) *
+			  (ebx.split.ways_of_associativity   + 1);
 	return 0;
 }
 
@@ -453,7 +477,7 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 
 /* pointer to _cpuid4_info array (for each cache leaf) */
 static DEFINE_PER_CPU(struct _cpuid4_info *, cpuid4_info);
-#define CPUID4_INFO_IDX(x, y)    (&((per_cpu(cpuid4_info, x))[y]))
+#define CPUID4_INFO_IDX(x, y)	(&((per_cpu(cpuid4_info, x))[y]))
 
 #ifdef CONFIG_SMP
 static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
@@ -490,7 +514,7 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
 
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
 	for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) {
-		sibling_leaf = CPUID4_INFO_IDX(sibling, index);	
+		sibling_leaf = CPUID4_INFO_IDX(sibling, index);
 		cpu_clear(cpu, sibling_leaf->shared_cpu_map);
 	}
 }
@@ -572,7 +596,7 @@ struct _index_kobject {
 
 /* pointer to array of kobjects for cpuX/cache/indexY */
 static DEFINE_PER_CPU(struct _index_kobject *, index_kobject);
-#define INDEX_KOBJECT_PTR(x, y)    (&((per_cpu(index_kobject, x))[y]))
+#define INDEX_KOBJECT_PTR(x, y)		(&((per_cpu(index_kobject, x))[y]))
 
 #define show_one_plus(file_name, object, val)				\
 static ssize_t show_##file_name						\
@@ -637,6 +661,99 @@ static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) {
 	}
 }
 
+#define to_object(k)	container_of(k, struct _index_kobject, kobj)
+#define to_attr(a)	container_of(a, struct _cache_attr, attr)
+
+#ifdef CONFIG_PCI
+static struct pci_dev *get_k8_northbridge(int node)
+{
+	struct pci_dev *dev = NULL;
+	int i;
+
+	for (i = 0; i <= node; i++) {
+		do {
+			dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+			if (!dev)
+				break;
+		} while (!pci_match_id(&k8_nb_id[0], dev));
+		if (!dev)
+			break;
+	}
+	return dev;
+}
+#else
+static struct pci_dev *get_k8_northbridge(int node)
+{
+	return NULL;
+}
+#endif
+
+static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf)
+{
+	int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map));
+	struct pci_dev *dev = NULL;
+	ssize_t ret = 0;
+	int i;
+
+	if (!this_leaf->can_disable)
+		return sprintf(buf, "Feature not enabled\n");
+
+	dev = get_k8_northbridge(node);
+	if (!dev) {
+		printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < 2; i++) {
+		unsigned int reg;
+
+		pci_read_config_dword(dev, 0x1BC + i * 4, &reg);
+
+		ret += sprintf(buf, "%sEntry: %d\n", buf, i);
+		ret += sprintf(buf, "%sReads:  %s\tNew Entries: %s\n",  
+			buf,
+			reg & 0x80000000 ? "Disabled" : "Allowed",
+			reg & 0x40000000 ? "Disabled" : "Allowed");
+		ret += sprintf(buf, "%sSubCache: %x\tIndex: %x\n",
+			buf, (reg & 0x30000) >> 16, reg & 0xfff);
+	}
+	return ret;
+}
+
+static ssize_t
+store_cache_disable(struct _cpuid4_info *this_leaf, const char *buf,
+		    size_t count)
+{
+	int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map));
+	struct pci_dev *dev = NULL;
+	unsigned int ret, index, val;
+
+	if (!this_leaf->can_disable)
+		return 0;
+
+	if (strlen(buf) > 15)
+		return -EINVAL;
+
+	ret = sscanf(buf, "%x %x", &index, &val);
+	if (ret != 2)
+		return -EINVAL;
+	if (index > 1)
+		return -EINVAL;
+
+	val |= 0xc0000000;
+	dev = get_k8_northbridge(node);
+	if (!dev) {
+		printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
+		return -EINVAL;
+	}
+
+	pci_write_config_dword(dev, 0x1BC + index * 4, val & ~0x40000000);
+	wbinvd();
+	pci_write_config_dword(dev, 0x1BC + index * 4, val);
+
+	return 1;
+}
+
 struct _cache_attr {
 	struct attribute attr;
 	ssize_t (*show)(struct _cpuid4_info *, char *);
@@ -657,6 +774,8 @@ define_one_ro(size);
 define_one_ro(shared_cpu_map);
 define_one_ro(shared_cpu_list);
 
+static struct _cache_attr cache_disable = __ATTR(cache_disable, 0644, show_cache_disable, store_cache_disable);
+
 static struct attribute * default_attrs[] = {
 	&type.attr,
 	&level.attr,
@@ -667,12 +786,10 @@ static struct attribute * default_attrs[] = {
 	&size.attr,
 	&shared_cpu_map.attr,
 	&shared_cpu_list.attr,
+	&cache_disable.attr,
 	NULL
 };
 
-#define to_object(k) container_of(k, struct _index_kobject, kobj)
-#define to_attr(a) container_of(a, struct _cache_attr, attr)
-
 static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
 {
 	struct _cache_attr *fattr = to_attr(attr);
@@ -682,14 +799,22 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
 	ret = fattr->show ?
 		fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
 			buf) :
-	       	0;
+		0;
 	return ret;
 }
 
 static ssize_t store(struct kobject * kobj, struct attribute * attr,
 		     const char * buf, size_t count)
 {
-	return 0;
+	struct _cache_attr *fattr = to_attr(attr);
+	struct _index_kobject *this_leaf = to_object(kobj);
+	ssize_t ret;
+
+	ret = fattr->store ?
+		fattr->store(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
+			buf, count) :
+		0;
+	return ret;
 }
 
 static struct sysfs_ops sysfs_ops = {
diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
index f390c9f..dd3af6e 100644
--- a/arch/x86/kernel/cpu/mcheck/k7.c
+++ b/arch/x86/kernel/cpu/mcheck/k7.c
@@ -1,6 +1,6 @@
 /*
- * Athlon/Hammer specific Machine Check Exception Reporting
- * (C) Copyright 2002 Dave Jones <davej@codemonkey.org.uk>
+ * Athlon specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Dave Jones <davej@redhat.com>
  */
 
 #include <linux/init.h>
diff --git a/arch/x86/kernel/cpu/mcheck/mce_32.c b/arch/x86/kernel/cpu/mcheck/mce_32.c
index 774d87c..0ebf3fc 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_32.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_32.c
@@ -1,6 +1,6 @@
 /*
  * mce.c - x86 Machine Check Exception Reporting
- * (c) 2002 Alan Cox <alan@redhat.com>, Dave Jones <davej@codemonkey.org.uk>
+ * (c) 2002 Alan Cox <alan@redhat.com>, Dave Jones <davej@redhat.com>
  */
 
 #include <linux/init.h>
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 726a5fc..4b031a4 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -860,7 +860,7 @@ error:
 	return err;
 }
 
-static void mce_remove_device(unsigned int cpu)
+static __cpuinit void mce_remove_device(unsigned int cpu)
 {
 	int i;
 
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
index cc1fccd..a74af12 100644
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c
@@ -1,7 +1,7 @@
 /*
  * Non Fatal Machine Check Exception Reporting
  *
- * (C) Copyright 2002 Dave Jones. <davej@codemonkey.org.uk>
+ * (C) Copyright 2002 Dave Jones. <davej@redhat.com>
  *
  * This file contains routines to check for non-fatal MCEs every 15s
  *
diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl
new file mode 100644
index 0000000..dfea390
--- /dev/null
+++ b/arch/x86/kernel/cpu/mkcapflags.pl
@@ -0,0 +1,32 @@
+#!/usr/bin/perl
+#
+# Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h
+#
+
+($in, $out) = @ARGV;
+
+open(IN, "< $in\0")   or die "$0: cannot open: $in: $!\n";
+open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n";
+
+print OUT "#include <asm/cpufeature.h>\n\n";
+print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
+
+while (defined($line = <IN>)) {
+	if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) {
+		$macro = $1;
+		$feature = $2;
+		$tail = $3;
+		if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) {
+			$feature = $1;
+		}
+
+		if ($feature ne '') {
+			printf OUT "\t%-32s = \"%s\",\n",
+				"[$macro]", "\L$feature";
+		}
+	}
+}
+print OUT "};\n";
+
+close(IN);
+close(OUT);
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index cb7d3b6..4e8d77f 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -401,12 +401,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 		tmp |= ~((1<<(hi - 1)) - 1);
 
 		if (tmp != mask_lo) {
-			static int once = 1;
-
-			if (once) {
-				printk(KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
-				once = 0;
-			}
+			WARN_ONCE(1, KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
 			mask_lo = tmp;
 		}
 	}
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index 84c480b..4c42146 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -405,9 +405,9 @@ static int mtrr_seq_show(struct seq_file *seq, void *offset)
 			}
 			/* RED-PEN: base can be > 32bit */ 
 			len += seq_printf(seq, 
-				   "reg%02i: base=0x%05lx000 (%4luMB), size=%4lu%cB: %s, count=%d\n",
+				   "reg%02i: base=0x%06lx000 (%5luMB), size=%5lu%cB, count=%d: %s\n",
 			     i, base, base >> (20 - PAGE_SHIFT), size, factor,
-			     mtrr_attrib_to_str(type), mtrr_usage_table[i]);
+			     mtrr_usage_table[i], mtrr_attrib_to_str(type));
 		}
 	}
 	return 0;
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index b117d7f..c78c048 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -729,7 +729,7 @@ struct var_mtrr_range_state {
 	mtrr_type type;
 };
 
-struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
+static struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
 static int __initdata debug_print;
 
 static int __init
@@ -759,7 +759,8 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 	/* take out UC ranges */
 	for (i = 0; i < num_var_ranges; i++) {
 		type = range_state[i].type;
-		if (type != MTRR_TYPE_UNCACHABLE)
+		if (type != MTRR_TYPE_UNCACHABLE &&
+		    type != MTRR_TYPE_WRPROT)
 			continue;
 		size = range_state[i].size_pfn;
 		if (!size)
@@ -834,7 +835,14 @@ static int __init enable_mtrr_cleanup_setup(char *str)
 		enable_mtrr_cleanup = 1;
 	return 0;
 }
-early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup);
+early_param("enable_mtrr_cleanup", enable_mtrr_cleanup_setup);
+
+static int __init mtrr_cleanup_debug_setup(char *str)
+{
+	debug_print = 1;
+	return 0;
+}
+early_param("mtrr_cleanup_debug", mtrr_cleanup_debug_setup);
 
 struct var_mtrr_state {
 	unsigned long	range_startk;
@@ -898,6 +906,27 @@ set_var_mtrr_all(unsigned int address_bits)
 	}
 }
 
+static unsigned long to_size_factor(unsigned long sizek, char *factorp)
+{
+	char factor;
+	unsigned long base = sizek;
+
+	if (base & ((1<<10) - 1)) {
+		/* not MB alignment */
+		factor = 'K';
+	} else if (base & ((1<<20) - 1)){
+		factor = 'M';
+		base >>= 10;
+	} else {
+		factor = 'G';
+		base >>= 20;
+	}
+
+	*factorp = factor;
+
+	return base;
+}
+
 static unsigned int __init
 range_to_mtrr(unsigned int reg, unsigned long range_startk,
 	      unsigned long range_sizek, unsigned char type)
@@ -919,13 +948,21 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk,
 			align = max_align;
 
 		sizek = 1 << align;
-		if (debug_print)
+		if (debug_print) {
+			char start_factor = 'K', size_factor = 'K';
+			unsigned long start_base, size_base;
+
+			start_base = to_size_factor(range_startk, &start_factor),
+			size_base = to_size_factor(sizek, &size_factor),
+
 			printk(KERN_DEBUG "Setting variable MTRR %d, "
-				"base: %ldMB, range: %ldMB, type %s\n",
-				reg, range_startk >> 10, sizek >> 10,
+				"base: %ld%cB, range: %ld%cB, type %s\n",
+				reg, start_base, start_factor,
+				size_base, size_factor,
 				(type == MTRR_TYPE_UNCACHABLE)?"UC":
 				    ((type == MTRR_TYPE_WRBACK)?"WB":"Other")
 				);
+		}
 		save_var_mtrr(reg++, range_startk, sizek, type);
 		range_startk += sizek;
 		range_sizek -= sizek;
@@ -970,6 +1007,8 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
 	/* try to append some small hole */
 	range0_basek = state->range_startk;
 	range0_sizek = ALIGN(state->range_sizek, chunk_sizek);
+
+	/* no increase */
 	if (range0_sizek == state->range_sizek) {
 		if (debug_print)
 			printk(KERN_DEBUG "rangeX: %016lx - %016lx\n",
@@ -980,13 +1019,40 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
 		return 0;
 	}
 
-	range0_sizek -= chunk_sizek;
-	if (range0_sizek && sizek) {
-	    while (range0_basek + range0_sizek > (basek + sizek)) {
-		range0_sizek -= chunk_sizek;
-		if (!range0_sizek)
-			break;
-	    }
+	/* only cut back, when it is not the last */
+	if (sizek) {
+		while (range0_basek + range0_sizek > (basek + sizek)) {
+			if (range0_sizek >= chunk_sizek)
+				range0_sizek -= chunk_sizek;
+			else
+				range0_sizek = 0;
+
+			if (!range0_sizek)
+				break;
+		}
+	}
+
+second_try:
+	range_basek = range0_basek + range0_sizek;
+
+	/* one hole in the middle */
+	if (range_basek > basek && range_basek <= (basek + sizek))
+		second_sizek = range_basek - basek;
+
+	if (range0_sizek > state->range_sizek) {
+
+		/* one hole in middle or at end */
+		hole_sizek = range0_sizek - state->range_sizek - second_sizek;
+
+		/* hole size should be less than half of range0 size */
+		if (hole_sizek >= (range0_sizek >> 1) &&
+		    range0_sizek >= chunk_sizek) {
+			range0_sizek -= chunk_sizek;
+			second_sizek = 0;
+			hole_sizek = 0;
+
+			goto second_try;
+		}
 	}
 
 	if (range0_sizek) {
@@ -996,50 +1062,28 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
 				(range0_basek + range0_sizek)<<10);
 		state->reg = range_to_mtrr(state->reg, range0_basek,
 				range0_sizek, MTRR_TYPE_WRBACK);
-
-	}
-
-	range_basek = range0_basek + range0_sizek;
-	range_sizek = chunk_sizek;
-
-	if (range_basek + range_sizek > basek &&
-	    range_basek + range_sizek <= (basek + sizek)) {
-		/* one hole */
-		second_basek = basek;
-		second_sizek = range_basek + range_sizek - basek;
 	}
 
-	/* if last piece, only could one hole near end */
-	if ((second_basek || !basek) &&
-	    range_sizek - (state->range_sizek - range0_sizek) - second_sizek <
-	    (chunk_sizek >> 1)) {
-		/*
-		 * one hole in middle (second_sizek is 0) or at end
-		 * (second_sizek is 0 )
-		 */
-		hole_sizek = range_sizek - (state->range_sizek - range0_sizek)
-				 - second_sizek;
-		hole_basek = range_basek + range_sizek - hole_sizek
-				 - second_sizek;
-	} else {
-		/* fallback for big hole, or several holes */
+	if (range0_sizek < state->range_sizek) {
+		/* need to handle left over */
 		range_sizek = state->range_sizek - range0_sizek;
-		second_basek = 0;
-		second_sizek = 0;
+
+		if (debug_print)
+			printk(KERN_DEBUG "range: %016lx - %016lx\n",
+				 range_basek<<10,
+				 (range_basek + range_sizek)<<10);
+		state->reg = range_to_mtrr(state->reg, range_basek,
+				 range_sizek, MTRR_TYPE_WRBACK);
 	}
 
-	if (debug_print)
-		printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10,
-			 (range_basek + range_sizek)<<10);
-	state->reg = range_to_mtrr(state->reg, range_basek, range_sizek,
-					 MTRR_TYPE_WRBACK);
 	if (hole_sizek) {
+		hole_basek = range_basek - hole_sizek - second_sizek;
 		if (debug_print)
 			printk(KERN_DEBUG "hole: %016lx - %016lx\n",
-				 hole_basek<<10, (hole_basek + hole_sizek)<<10);
-		state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek,
-						 MTRR_TYPE_UNCACHABLE);
-
+				 hole_basek<<10,
+				 (hole_basek + hole_sizek)<<10);
+		state->reg = range_to_mtrr(state->reg, hole_basek,
+				 hole_sizek, MTRR_TYPE_UNCACHABLE);
 	}
 
 	return second_sizek;
@@ -1154,11 +1198,11 @@ struct mtrr_cleanup_result {
 };
 
 /*
- * gran_size: 1M, 2M, ..., 2G
- * chunk size: gran_size, ..., 4G
- * so we need (2+13)*6
+ * gran_size: 64K, 128K, 256K, 512K, 1M, 2M, ..., 2G
+ * chunk size: gran_size, ..., 2G
+ * so we need (1+16)*8
  */
-#define NUM_RESULT	90
+#define NUM_RESULT	136
 #define PSHIFT		(PAGE_SHIFT - 10)
 
 static struct mtrr_cleanup_result __initdata result[NUM_RESULT];
@@ -1168,13 +1212,14 @@ static unsigned long __initdata min_loss_pfn[RANGE_NUM];
 static int __init mtrr_cleanup(unsigned address_bits)
 {
 	unsigned long extra_remove_base, extra_remove_size;
-	unsigned long i, base, size, def, dummy;
+	unsigned long base, size, def, dummy;
 	mtrr_type type;
 	int nr_range, nr_range_new;
 	u64 chunk_size, gran_size;
 	unsigned long range_sums, range_sums_new;
 	int index_good;
 	int num_reg_good;
+	int i;
 
 	/* extra one for all 0 */
 	int num[MTRR_NUM_TYPES + 1];
@@ -1204,6 +1249,8 @@ static int __init mtrr_cleanup(unsigned address_bits)
 			continue;
 		if (!size)
 			type = MTRR_NUM_TYPES;
+		if (type == MTRR_TYPE_WRPROT)
+			type = MTRR_TYPE_UNCACHABLE;
 		num[type]++;
 	}
 
@@ -1216,23 +1263,57 @@ static int __init mtrr_cleanup(unsigned address_bits)
 		num_var_ranges - num[MTRR_NUM_TYPES])
 		return 0;
 
+	/* print original var MTRRs at first, for debugging: */
+	printk(KERN_DEBUG "original variable MTRRs\n");
+	for (i = 0; i < num_var_ranges; i++) {
+		char start_factor = 'K', size_factor = 'K';
+		unsigned long start_base, size_base;
+
+		size_base = range_state[i].size_pfn << (PAGE_SHIFT - 10);
+		if (!size_base)
+			continue;
+
+		size_base = to_size_factor(size_base, &size_factor),
+		start_base = range_state[i].base_pfn << (PAGE_SHIFT - 10);
+		start_base = to_size_factor(start_base, &start_factor),
+		type = range_state[i].type;
+
+		printk(KERN_DEBUG "reg %d, base: %ld%cB, range: %ld%cB, type %s\n",
+			i, start_base, start_factor,
+			size_base, size_factor,
+			(type == MTRR_TYPE_UNCACHABLE) ? "UC" :
+			    ((type == MTRR_TYPE_WRPROT) ? "WP" :
+			     ((type == MTRR_TYPE_WRBACK) ? "WB" : "Other"))
+			);
+	}
+
 	memset(range, 0, sizeof(range));
 	extra_remove_size = 0;
-	if (mtrr_tom2) {
-		extra_remove_base = 1 << (32 - PAGE_SHIFT);
+	extra_remove_base = 1 << (32 - PAGE_SHIFT);
+	if (mtrr_tom2)
 		extra_remove_size =
 			(mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base;
-	}
 	nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base,
 					  extra_remove_size);
+	/*
+	 * [0, 1M) should always be coverred by var mtrr with WB
+	 * and fixed mtrrs should take effective before var mtrr for it
+	 */
+	nr_range = add_range_with_merge(range, nr_range, 0,
+					(1ULL<<(20 - PAGE_SHIFT)) - 1);
+	/* sort the ranges */
+	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
+
 	range_sums = sum_ranges(range, nr_range);
 	printk(KERN_INFO "total RAM coverred: %ldM\n",
 	       range_sums >> (20 - PAGE_SHIFT));
 
 	if (mtrr_chunk_size && mtrr_gran_size) {
 		int num_reg;
+		char gran_factor, chunk_factor, lose_factor;
+		unsigned long gran_base, chunk_base, lose_base;
 
-		debug_print = 1;
+		debug_print++;
 		/* convert ranges to var ranges state */
 		num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size,
 					      mtrr_gran_size);
@@ -1256,34 +1337,48 @@ static int __init mtrr_cleanup(unsigned address_bits)
 			result[i].lose_cover_sizek =
 				(range_sums - range_sums_new) << PSHIFT;
 
-		printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t",
-			 result[i].bad?"*BAD*":" ", result[i].gran_sizek >> 10,
-			 result[i].chunk_sizek >> 10);
-		printk(KERN_CONT "num_reg: %d  \tlose cover RAM: %s%ldM \n",
+		gran_base = to_size_factor(result[i].gran_sizek, &gran_factor),
+		chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor),
+		lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor),
+		printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t",
+			 result[i].bad?"*BAD*":" ",
+			 gran_base, gran_factor, chunk_base, chunk_factor);
+		printk(KERN_CONT "num_reg: %d  \tlose cover RAM: %s%ld%c\n",
 			 result[i].num_reg, result[i].bad?"-":"",
-			 result[i].lose_cover_sizek >> 10);
+			 lose_base, lose_factor);
 		if (!result[i].bad) {
 			set_var_mtrr_all(address_bits);
 			return 1;
 		}
 		printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, "
 		       "will find optimal one\n");
-		debug_print = 0;
+		debug_print--;
 		memset(result, 0, sizeof(result[0]));
 	}
 
 	i = 0;
 	memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn));
 	memset(result, 0, sizeof(result));
-	for (gran_size = (1ULL<<20); gran_size < (1ULL<<32); gran_size <<= 1) {
-		for (chunk_size = gran_size; chunk_size < (1ULL<<33);
+	for (gran_size = (1ULL<<16); gran_size < (1ULL<<32); gran_size <<= 1) {
+		char gran_factor;
+		unsigned long gran_base;
+
+		if (debug_print)
+			gran_base = to_size_factor(gran_size >> 10, &gran_factor);
+
+		for (chunk_size = gran_size; chunk_size < (1ULL<<32);
 		     chunk_size <<= 1) {
 			int num_reg;
 
-			if (debug_print)
-				printk(KERN_INFO
-			       "\ngran_size: %lldM   chunk_size_size: %lldM\n",
-				       gran_size >> 20, chunk_size >> 20);
+			if (debug_print) {
+				char chunk_factor;
+				unsigned long chunk_base;
+
+				chunk_base = to_size_factor(chunk_size>>10, &chunk_factor),
+				printk(KERN_INFO "\n");
+				printk(KERN_INFO "gran_size: %ld%c   chunk_size: %ld%c \n",
+				       gran_base, gran_factor, chunk_base, chunk_factor);
+			}
 			if (i >= NUM_RESULT)
 				continue;
 
@@ -1326,12 +1421,18 @@ static int __init mtrr_cleanup(unsigned address_bits)
 
 	/* print out all */
 	for (i = 0; i < NUM_RESULT; i++) {
-		printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t",
-		       result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10,
-		       result[i].chunk_sizek >> 10);
-		printk(KERN_CONT "num_reg: %d \tlose RAM: %s%ldM\n",
-		       result[i].num_reg, result[i].bad?"-":"",
-		       result[i].lose_cover_sizek >> 10);
+		char gran_factor, chunk_factor, lose_factor;
+		unsigned long gran_base, chunk_base, lose_base;
+
+		gran_base = to_size_factor(result[i].gran_sizek, &gran_factor),
+		chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor),
+		lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor),
+		printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t",
+			 result[i].bad?"*BAD*":" ",
+			 gran_base, gran_factor, chunk_base, chunk_factor);
+		printk(KERN_CONT "num_reg: %d  \tlose cover RAM: %s%ld%c\n",
+			 result[i].num_reg, result[i].bad?"-":"",
+			 lose_base, lose_factor);
 	}
 
 	/* try to find the optimal index */
@@ -1339,10 +1440,8 @@ static int __init mtrr_cleanup(unsigned address_bits)
 		nr_mtrr_spare_reg = num_var_ranges - 1;
 	num_reg_good = -1;
 	for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) {
-		if (!min_loss_pfn[i]) {
+		if (!min_loss_pfn[i])
 			num_reg_good = i;
-			break;
-		}
 	}
 
 	index_good = -1;
@@ -1358,21 +1457,26 @@ static int __init mtrr_cleanup(unsigned address_bits)
 	}
 
 	if (index_good != -1) {
+		char gran_factor, chunk_factor, lose_factor;
+		unsigned long gran_base, chunk_base, lose_base;
+
 		printk(KERN_INFO "Found optimal setting for mtrr clean up\n");
 		i = index_good;
-		printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t",
-				result[i].gran_sizek >> 10,
-				result[i].chunk_sizek >> 10);
-		printk(KERN_CONT "num_reg: %d \tlose RAM: %ldM\n",
-				result[i].num_reg,
-				result[i].lose_cover_sizek >> 10);
+		gran_base = to_size_factor(result[i].gran_sizek, &gran_factor),
+		chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor),
+		lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor),
+		printk(KERN_INFO "gran_size: %ld%c \tchunk_size: %ld%c \t",
+			 gran_base, gran_factor, chunk_base, chunk_factor);
+		printk(KERN_CONT "num_reg: %d  \tlose RAM: %ld%c\n",
+			 result[i].num_reg, lose_base, lose_factor);
 		/* convert ranges to var ranges state */
 		chunk_size = result[i].chunk_sizek;
 		chunk_size <<= 10;
 		gran_size = result[i].gran_sizek;
 		gran_size <<= 10;
-		debug_print = 1;
+		debug_print++;
 		x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size);
+		debug_print--;
 		set_var_mtrr_all(address_bits);
 		return 1;
 	}
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 05cc22d..9abd48b 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -17,6 +17,8 @@
 #include <linux/bitops.h>
 #include <linux/smp.h>
 #include <linux/nmi.h>
+#include <linux/kprobes.h>
+
 #include <asm/apic.h>
 #include <asm/intel_arch_perfmon.h>
 
@@ -295,13 +297,19 @@ static int setup_k7_watchdog(unsigned nmi_hz)
 	/* setup the timer */
 	wrmsr(evntsel_msr, evntsel, 0);
 	write_watchdog_counter(perfctr_msr, "K7_PERFCTR0",nmi_hz);
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= K7_EVNTSEL_ENABLE;
-	wrmsr(evntsel_msr, evntsel, 0);
 
+	/* initialize the wd struct before enabling */
 	wd->perfctr_msr = perfctr_msr;
 	wd->evntsel_msr = evntsel_msr;
 	wd->cccr_msr = 0;  /* unused */
+
+	/* ok, everything is initialized, announce that we're set */
+	cpu_nmi_set_wd_enabled();
+
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+	evntsel |= K7_EVNTSEL_ENABLE;
+	wrmsr(evntsel_msr, evntsel, 0);
+
 	return 1;
 }
 
@@ -330,7 +338,8 @@ static void single_msr_unreserve(void)
 	release_perfctr_nmi(wd_ops->perfctr);
 }
 
-static void single_msr_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
+static void __kprobes
+single_msr_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 {
 	/* start the cycle over again */
 	write_watchdog_counter(wd->perfctr_msr, NULL, nmi_hz);
@@ -379,17 +388,23 @@ static int setup_p6_watchdog(unsigned nmi_hz)
 	wrmsr(evntsel_msr, evntsel, 0);
 	nmi_hz = adjust_for_32bit_ctr(nmi_hz);
 	write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0",nmi_hz);
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= P6_EVNTSEL0_ENABLE;
-	wrmsr(evntsel_msr, evntsel, 0);
 
+	/* initialize the wd struct before enabling */
 	wd->perfctr_msr = perfctr_msr;
 	wd->evntsel_msr = evntsel_msr;
 	wd->cccr_msr = 0;  /* unused */
+
+	/* ok, everything is initialized, announce that we're set */
+	cpu_nmi_set_wd_enabled();
+
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+	evntsel |= P6_EVNTSEL0_ENABLE;
+	wrmsr(evntsel_msr, evntsel, 0);
+
 	return 1;
 }
 
-static void p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
+static void __kprobes p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 {
 	/*
 	 * P6 based Pentium M need to re-unmask
@@ -432,6 +447,27 @@ static const struct wd_ops p6_wd_ops = {
 #define P4_CCCR_ENABLE		(1 << 12)
 #define P4_CCCR_OVF 		(1 << 31)
 
+#define P4_CONTROLS 18
+static unsigned int p4_controls[18] = {
+	MSR_P4_BPU_CCCR0,
+	MSR_P4_BPU_CCCR1,
+	MSR_P4_BPU_CCCR2,
+	MSR_P4_BPU_CCCR3,
+	MSR_P4_MS_CCCR0,
+	MSR_P4_MS_CCCR1,
+	MSR_P4_MS_CCCR2,
+	MSR_P4_MS_CCCR3,
+	MSR_P4_FLAME_CCCR0,
+	MSR_P4_FLAME_CCCR1,
+	MSR_P4_FLAME_CCCR2,
+	MSR_P4_FLAME_CCCR3,
+	MSR_P4_IQ_CCCR0,
+	MSR_P4_IQ_CCCR1,
+	MSR_P4_IQ_CCCR2,
+	MSR_P4_IQ_CCCR3,
+	MSR_P4_IQ_CCCR4,
+	MSR_P4_IQ_CCCR5,
+};
 /*
  * Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
  * CRU_ESCR0 (with any non-null event selector) through a complemented
@@ -473,6 +509,26 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 		evntsel_msr = MSR_P4_CRU_ESCR0;
 		cccr_msr = MSR_P4_IQ_CCCR0;
 		cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4);
+
+		/*
+		 * If we're on the kdump kernel or other situation, we may
+		 * still have other performance counter registers set to
+		 * interrupt and they'll keep interrupting forever because
+		 * of the P4_CCCR_OVF quirk. So we need to ACK all the
+		 * pending interrupts and disable all the registers here,
+		 * before reenabling the NMI delivery. Refer to p4_rearm()
+		 * about the P4_CCCR_OVF quirk.
+		 */
+		if (reset_devices) {
+			unsigned int low, high;
+			int i;
+
+			for (i = 0; i < P4_CONTROLS; i++) {
+				rdmsr(p4_controls[i], low, high);
+				low &= ~(P4_CCCR_ENABLE | P4_CCCR_OVF);
+				wrmsr(p4_controls[i], low, high);
+			}
+		}
 	} else {
 		/* logical cpu 1 */
 		perfctr_msr = MSR_P4_IQ_PERFCTR1;
@@ -499,12 +555,17 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 	wrmsr(evntsel_msr, evntsel, 0);
 	wrmsr(cccr_msr, cccr_val, 0);
 	write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0", nmi_hz);
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	cccr_val |= P4_CCCR_ENABLE;
-	wrmsr(cccr_msr, cccr_val, 0);
+
 	wd->perfctr_msr = perfctr_msr;
 	wd->evntsel_msr = evntsel_msr;
 	wd->cccr_msr = cccr_msr;
+
+	/* ok, everything is initialized, announce that we're set */
+	cpu_nmi_set_wd_enabled();
+
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+	cccr_val |= P4_CCCR_ENABLE;
+	wrmsr(cccr_msr, cccr_val, 0);
 	return 1;
 }
 
@@ -547,7 +608,7 @@ static void p4_unreserve(void)
 	release_perfctr_nmi(MSR_P4_IQ_PERFCTR0);
 }
 
-static void p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
+static void __kprobes p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 {
 	unsigned dummy;
 	/*
@@ -620,13 +681,17 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz)
 	wrmsr(evntsel_msr, evntsel, 0);
 	nmi_hz = adjust_for_32bit_ctr(nmi_hz);
 	write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0", nmi_hz);
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-	wrmsr(evntsel_msr, evntsel, 0);
 
 	wd->perfctr_msr = perfctr_msr;
 	wd->evntsel_msr = evntsel_msr;
 	wd->cccr_msr = 0;  /* unused */
+
+	/* ok, everything is initialized, announce that we're set */
+	cpu_nmi_set_wd_enabled();
+
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+	evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	wrmsr(evntsel_msr, evntsel, 0);
 	intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1);
 	return 1;
 }
@@ -722,7 +787,7 @@ unsigned lapic_adjust_nmi_hz(unsigned hz)
 	return hz;
 }
 
-int lapic_wd_event(unsigned nmi_hz)
+int __kprobes lapic_wd_event(unsigned nmi_hz)
 {
 	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
 	u64 ctr;
diff --git a/arch/x86/kernel/cpu/powerflags.c b/arch/x86/kernel/cpu/powerflags.c
new file mode 100644
index 0000000..5abbea2
--- /dev/null
+++ b/arch/x86/kernel/cpu/powerflags.c
@@ -0,0 +1,20 @@
+/*
+ * Strings for the various x86 power flags
+ *
+ * This file must not contain any executable code.
+ */
+
+#include <asm/cpufeature.h>
+
+const char *const x86_power_flags[32] = {
+	"ts",	/* temperature sensor */
+	"fid",  /* frequency id control */
+	"vid",  /* voltage id control */
+	"ttp",  /* thermal trip */
+	"tm",
+	"stc",
+	"100mhzsteps",
+	"hwpstate",
+	"",	/* tsc invariant mapped to constant_tsc */
+		/* nothing */
+};
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index a26c480..01b1244 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -160,14 +160,16 @@ static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	if (*pos == 0)	/* just in case, cpu 0 is not the first */
 		*pos = first_cpu(cpu_online_map);
-	if ((*pos) < nr_cpu_ids && cpu_online(*pos))
+	else
+		*pos = next_cpu_nr(*pos - 1, cpu_online_map);
+	if ((*pos) < nr_cpu_ids)
 		return &cpu_data(*pos);
 	return NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	*pos = next_cpu(*pos, cpu_online_map);
+	(*pos)++;
 	return c_start(m, pos);
 }
 
diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c
index b911a2c..52b3fef 100644
--- a/arch/x86/kernel/cpu/transmeta.c
+++ b/arch/x86/kernel/cpu/transmeta.c
@@ -5,6 +5,18 @@
 #include <asm/msr.h>
 #include "cpu.h"
 
+static void __cpuinit early_init_transmeta(struct cpuinfo_x86 *c)
+{
+	u32 xlvl;
+
+	/* Transmeta-defined flags: level 0x80860001 */
+	xlvl = cpuid_eax(0x80860000);
+	if ((xlvl & 0xffff0000) == 0x80860000) {
+		if (xlvl >= 0x80860001)
+			c->x86_capability[2] = cpuid_edx(0x80860001);
+	}
+}
+
 static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 {
 	unsigned int cap_mask, uk, max, dummy;
@@ -12,7 +24,8 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 	unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev;
 	char cpu_info[65];
 
-	get_model_name(c);	/* Same as AMD/Cyrix */
+	early_init_transmeta(c);
+
 	display_cacheinfo(c);
 
 	/* Print CMS and CPU revision */
@@ -85,23 +98,12 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 #endif
 }
 
-static void __cpuinit transmeta_identify(struct cpuinfo_x86 *c)
-{
-	u32 xlvl;
-
-	/* Transmeta-defined flags: level 0x80860001 */
-	xlvl = cpuid_eax(0x80860000);
-	if ((xlvl & 0xffff0000) == 0x80860000) {
-		if (xlvl >= 0x80860001)
-			c->x86_capability[2] = cpuid_edx(0x80860001);
-	}
-}
-
 static struct cpu_dev transmeta_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Transmeta",
 	.c_ident	= { "GenuineTMx86", "TransmetaCPU" },
+	.c_early_init	= early_init_transmeta,
 	.c_init		= init_transmeta,
-	.c_identify	= transmeta_identify,
+	.c_x86_vendor	= X86_VENDOR_TRANSMETA,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_TRANSMETA, &transmeta_cpu_dev);
+cpu_dev_register(transmeta_cpu_dev);
diff --git a/arch/x86/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c
index b1fc909..e777f79 100644
--- a/arch/x86/kernel/cpu/umc.c
+++ b/arch/x86/kernel/cpu/umc.c
@@ -19,7 +19,8 @@ static struct cpu_dev umc_cpu_dev __cpuinitdata = {
 		  }
 		},
 	},
+	.c_x86_vendor	= X86_VENDOR_UMC,
 };
 
-cpu_vendor_dev_register(X86_VENDOR_UMC, &umc_cpu_dev);
+cpu_dev_register(umc_cpu_dev);
 
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 8e9cd6a..72cefd1 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -36,7 +36,6 @@
 #include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/fs.h>
-#include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
@@ -148,8 +147,8 @@ static __cpuinit int cpuid_device_create(int cpu)
 {
 	struct device *dev;
 
-	dev = device_create_drvdata(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
-				    NULL, "cpu%d", cpu);
+	dev = device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu), NULL,
+			    "cpu%d", cpu);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/crash_dump_32.c b/arch/x86/kernel/crash_dump_32.c
index 72d0c56..f7cdb3b 100644
--- a/arch/x86/kernel/crash_dump_32.c
+++ b/arch/x86/kernel/crash_dump_32.c
@@ -13,6 +13,9 @@
 
 static void *kdump_buf_page;
 
+/* Stores the physical address of elf header of crash image. */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+
 /**
  * copy_oldmem_page - copy one page from "oldmem"
  * @pfn: page frame number to be copied
diff --git a/arch/x86/kernel/crash_dump_64.c b/arch/x86/kernel/crash_dump_64.c
index 15e6c6b..045b36c 100644
--- a/arch/x86/kernel/crash_dump_64.c
+++ b/arch/x86/kernel/crash_dump_64.c
@@ -7,9 +7,11 @@
 
 #include <linux/errno.h>
 #include <linux/crash_dump.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
-#include <asm/uaccess.h>
-#include <asm/io.h>
+/* Stores the physical address of elf header of crash image. */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
 
 /**
  * copy_oldmem_page - copy one page from "oldmem"
@@ -25,7 +27,7 @@
  * in the current kernel. We stitch up a pte, similar to kmap_atomic.
  */
 ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
-                               size_t csize, unsigned long offset, int userbuf)
+		size_t csize, unsigned long offset, int userbuf)
 {
 	void  *vaddr;
 
@@ -33,14 +35,16 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 		return 0;
 
 	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+	if (!vaddr)
+		return -ENOMEM;
 
 	if (userbuf) {
-		if (copy_to_user(buf, (vaddr + offset), csize)) {
+		if (copy_to_user(buf, vaddr + offset, csize)) {
 			iounmap(vaddr);
 			return -EFAULT;
 		}
 	} else
-	memcpy(buf, (vaddr + offset), csize);
+		memcpy(buf, vaddr + offset, csize);
 
 	iounmap(vaddr);
 	return csize;
diff --git a/arch/x86/kernel/doublefault_32.c b/arch/x86/kernel/doublefault_32.c
index a47798b..b4f14c6 100644
--- a/arch/x86/kernel/doublefault_32.c
+++ b/arch/x86/kernel/doublefault_32.c
@@ -66,6 +66,6 @@ struct tss_struct doublefault_tss __cacheline_aligned = {
 		.ds		= __USER_DS,
 		.fs		= __KERNEL_PERCPU,
 
-		.__cr3		= __pa(swapper_pg_dir)
+		.__cr3		= __pa_nodebug(swapper_pg_dir),
 	}
 };
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index 11c11b8..2b69994 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -2,26 +2,49 @@
  * Debug Store support
  *
  * This provides a low-level interface to the hardware's Debug Store
- * feature that is used for last branch recording (LBR) and
+ * feature that is used for branch trace store (BTS) and
  * precise-event based sampling (PEBS).
  *
- * Different architectures use a different DS layout/pointer size.
- * The below functions therefore work on a void*.
+ * It manages:
+ * - per-thread and per-cpu allocation of BTS and PEBS
+ * - buffer memory allocation (optional)
+ * - buffer overflow handling
+ * - buffer access
  *
+ * It assumes:
+ * - get_task_struct on all parameter tasks
+ * - current is allowed to trace parameter tasks
  *
- * Since there is no user for PEBS, yet, only LBR (or branch
- * trace store, BTS) is supported.
  *
- *
- * Copyright (C) 2007 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, Dec 2007
+ * Copyright (C) 2007-2008 Intel Corporation.
+ * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
  */
 
+
+#ifdef CONFIG_X86_DS
+
 #include <asm/ds.h>
 
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+
+/*
+ * The configuration for a particular DS hardware implementation.
+ */
+struct ds_configuration {
+	/* the size of the DS structure in bytes */
+	unsigned char  sizeof_ds;
+	/* the size of one pointer-typed field in the DS structure in bytes;
+	   this covers the first 8 fields related to buffer management. */
+	unsigned char  sizeof_field;
+	/* the size of a BTS/PEBS record in bytes */
+	unsigned char  sizeof_rec[2];
+};
+static struct ds_configuration ds_cfg;
 
 
 /*
@@ -44,378 +67,747 @@
  *   (interrupt occurs when write pointer passes interrupt pointer)
  * - value to which counter is reset following counter overflow
  *
- * On later architectures, the last branch recording hardware uses
- * 64bit pointers even in 32bit mode.
- *
- *
- * Branch Trace Store (BTS) records store information about control
- * flow changes. They at least provide the following information:
- * - source linear address
- * - destination linear address
+ * Later architectures use 64bit pointers throughout, whereas earlier
+ * architectures use 32bit pointers in 32bit mode.
  *
- * Netburst supported a predicated bit that had been dropped in later
- * architectures. We do not suppor it.
  *
+ * We compute the base address for the first 8 fields based on:
+ * - the field size stored in the DS configuration
+ * - the relative field position
+ * - an offset giving the start of the respective region
  *
- * In order to abstract from the actual DS and BTS layout, we describe
- * the access to the relevant fields.
- * Thanks to Andi Kleen for proposing this design.
+ * This offset is further used to index various arrays holding
+ * information for BTS and PEBS at the respective index.
  *
- * The implementation, however, is not as general as it might seem. In
- * order to stay somewhat simple and efficient, we assume an
- * underlying unsigned type (mostly a pointer type) and we expect the
- * field to be at least as big as that type.
+ * On later 32bit processors, we only access the lower 32bit of the
+ * 64bit pointer fields. The upper halves will be zeroed out.
  */
 
-/*
- * A special from_ip address to indicate that the BTS record is an
- * info record that needs to be interpreted or skipped.
- */
-#define BTS_ESCAPE_ADDRESS (-1)
+enum ds_field {
+	ds_buffer_base = 0,
+	ds_index,
+	ds_absolute_maximum,
+	ds_interrupt_threshold,
+};
 
-/*
- * A field access descriptor
- */
-struct access_desc {
-	unsigned char offset;
-	unsigned char size;
+enum ds_qualifier {
+	ds_bts  = 0,
+	ds_pebs
 };
 
+static inline unsigned long ds_get(const unsigned char *base,
+				   enum ds_qualifier qual, enum ds_field field)
+{
+	base += (ds_cfg.sizeof_field * (field + (4 * qual)));
+	return *(unsigned long *)base;
+}
+
+static inline void ds_set(unsigned char *base, enum ds_qualifier qual,
+			  enum ds_field field, unsigned long value)
+{
+	base += (ds_cfg.sizeof_field * (field + (4 * qual)));
+	(*(unsigned long *)base) = value;
+}
+
+
 /*
- * The configuration for a particular DS/BTS hardware implementation.
+ * Locking is done only for allocating BTS or PEBS resources and for
+ * guarding context and buffer memory allocation.
+ *
+ * Most functions require the current task to own the ds context part
+ * they are going to access. All the locking is done when validating
+ * access to the context.
  */
-struct ds_configuration {
-	/* the DS configuration */
-	unsigned char  sizeof_ds;
-	struct access_desc bts_buffer_base;
-	struct access_desc bts_index;
-	struct access_desc bts_absolute_maximum;
-	struct access_desc bts_interrupt_threshold;
-	/* the BTS configuration */
-	unsigned char  sizeof_bts;
-	struct access_desc from_ip;
-	struct access_desc to_ip;
-	/* BTS variants used to store additional information like
-	   timestamps */
-	struct access_desc info_type;
-	struct access_desc info_data;
-	unsigned long debugctl_mask;
-};
+static spinlock_t ds_lock = __SPIN_LOCK_UNLOCKED(ds_lock);
 
 /*
- * The global configuration used by the below accessor functions
+ * Validate that the current task is allowed to access the BTS/PEBS
+ * buffer of the parameter task.
+ *
+ * Returns 0, if access is granted; -Eerrno, otherwise.
  */
-static struct ds_configuration ds_cfg;
+static inline int ds_validate_access(struct ds_context *context,
+				     enum ds_qualifier qual)
+{
+	if (!context)
+		return -EPERM;
+
+	if (context->owner[qual] == current)
+		return 0;
+
+	return -EPERM;
+}
+
 
 /*
- * Accessor functions for some DS and BTS fields using the above
- * global ptrace_bts_cfg.
+ * We either support (system-wide) per-cpu or per-thread allocation.
+ * We distinguish the two based on the task_struct pointer, where a
+ * NULL pointer indicates per-cpu allocation for the current cpu.
+ *
+ * Allocations are use-counted. As soon as resources are allocated,
+ * further allocations must be of the same type (per-cpu or
+ * per-thread). We model this by counting allocations (i.e. the number
+ * of tracers of a certain type) for one type negatively:
+ *   =0  no tracers
+ *   >0  number of per-thread tracers
+ *   <0  number of per-cpu tracers
+ *
+ * The below functions to get and put tracers and to check the
+ * allocation type require the ds_lock to be held by the caller.
+ *
+ * Tracers essentially gives the number of ds contexts for a certain
+ * type of allocation.
  */
-static inline unsigned long get_bts_buffer_base(char *base)
+static long tracers;
+
+static inline void get_tracer(struct task_struct *task)
 {
-	return *(unsigned long *)(base + ds_cfg.bts_buffer_base.offset);
+	tracers += (task ? 1 : -1);
 }
-static inline void set_bts_buffer_base(char *base, unsigned long value)
+
+static inline void put_tracer(struct task_struct *task)
 {
-	(*(unsigned long *)(base + ds_cfg.bts_buffer_base.offset)) = value;
+	tracers -= (task ? 1 : -1);
 }
-static inline unsigned long get_bts_index(char *base)
+
+static inline int check_tracer(struct task_struct *task)
 {
-	return *(unsigned long *)(base + ds_cfg.bts_index.offset);
+	return (task ? (tracers >= 0) : (tracers <= 0));
 }
-static inline void set_bts_index(char *base, unsigned long value)
+
+
+/*
+ * The DS context is either attached to a thread or to a cpu:
+ * - in the former case, the thread_struct contains a pointer to the
+ *   attached context.
+ * - in the latter case, we use a static array of per-cpu context
+ *   pointers.
+ *
+ * Contexts are use-counted. They are allocated on first access and
+ * deallocated when the last user puts the context.
+ *
+ * We distinguish between an allocating and a non-allocating get of a
+ * context:
+ * - the allocating get is used for requesting BTS/PEBS resources. It
+ *   requires the caller to hold the global ds_lock.
+ * - the non-allocating get is used for all other cases. A
+ *   non-existing context indicates an error. It acquires and releases
+ *   the ds_lock itself for obtaining the context.
+ *
+ * A context and its DS configuration are allocated and deallocated
+ * together. A context always has a DS configuration of the
+ * appropriate size.
+ */
+static DEFINE_PER_CPU(struct ds_context *, system_context);
+
+#define this_system_context per_cpu(system_context, smp_processor_id())
+
+/*
+ * Returns the pointer to the parameter task's context or to the
+ * system-wide context, if task is NULL.
+ *
+ * Increases the use count of the returned context, if not NULL.
+ */
+static inline struct ds_context *ds_get_context(struct task_struct *task)
 {
-	(*(unsigned long *)(base + ds_cfg.bts_index.offset)) = value;
+	struct ds_context *context;
+
+	spin_lock(&ds_lock);
+
+	context = (task ? task->thread.ds_ctx : this_system_context);
+	if (context)
+		context->count++;
+
+	spin_unlock(&ds_lock);
+
+	return context;
 }
-static inline unsigned long get_bts_absolute_maximum(char *base)
+
+/*
+ * Same as ds_get_context, but allocates the context and it's DS
+ * structure, if necessary; returns NULL; if out of memory.
+ *
+ * pre: requires ds_lock to be held
+ */
+static inline struct ds_context *ds_alloc_context(struct task_struct *task)
 {
-	return *(unsigned long *)(base + ds_cfg.bts_absolute_maximum.offset);
+	struct ds_context **p_context =
+		(task ? &task->thread.ds_ctx : &this_system_context);
+	struct ds_context *context = *p_context;
+
+	if (!context) {
+		context = kzalloc(sizeof(*context), GFP_KERNEL);
+
+		if (!context)
+			return NULL;
+
+		context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL);
+		if (!context->ds) {
+			kfree(context);
+			return NULL;
+		}
+
+		*p_context = context;
+
+		context->this = p_context;
+		context->task = task;
+
+		if (task)
+			set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
+
+		if (!task || (task == current))
+			wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0);
+
+		get_tracer(task);
+	}
+
+	context->count++;
+
+	return context;
 }
-static inline void set_bts_absolute_maximum(char *base, unsigned long value)
+
+/*
+ * Decreases the use count of the parameter context, if not NULL.
+ * Deallocates the context, if the use count reaches zero.
+ */
+static inline void ds_put_context(struct ds_context *context)
 {
-	(*(unsigned long *)(base + ds_cfg.bts_absolute_maximum.offset)) = value;
+	if (!context)
+		return;
+
+	spin_lock(&ds_lock);
+
+	if (--context->count)
+		goto out;
+
+	*(context->this) = NULL;
+
+	if (context->task)
+		clear_tsk_thread_flag(context->task, TIF_DS_AREA_MSR);
+
+	if (!context->task || (context->task == current))
+		wrmsrl(MSR_IA32_DS_AREA, 0);
+
+	put_tracer(context->task);
+
+	/* free any leftover buffers from tracers that did not
+	 * deallocate them properly. */
+	kfree(context->buffer[ds_bts]);
+	kfree(context->buffer[ds_pebs]);
+	kfree(context->ds);
+	kfree(context);
+ out:
+	spin_unlock(&ds_lock);
 }
-static inline unsigned long get_bts_interrupt_threshold(char *base)
+
+
+/*
+ * Handle a buffer overflow
+ *
+ * task: the task whose buffers are overflowing;
+ *       NULL for a buffer overflow on the current cpu
+ * context: the ds context
+ * qual: the buffer type
+ */
+static void ds_overflow(struct task_struct *task, struct ds_context *context,
+			enum ds_qualifier qual)
 {
-	return *(unsigned long *)(base + ds_cfg.bts_interrupt_threshold.offset);
+	if (!context)
+		return;
+
+	if (context->callback[qual])
+		(*context->callback[qual])(task);
+
+	/* todo: do some more overflow handling */
 }
-static inline void set_bts_interrupt_threshold(char *base, unsigned long value)
+
+
+/*
+ * Allocate a non-pageable buffer of the parameter size.
+ * Checks the memory and the locked memory rlimit.
+ *
+ * Returns the buffer, if successful;
+ *         NULL, if out of memory or rlimit exceeded.
+ *
+ * size: the requested buffer size in bytes
+ * pages (out): if not NULL, contains the number of pages reserved
+ */
+static inline void *ds_allocate_buffer(size_t size, unsigned int *pages)
 {
-	(*(unsigned long *)(base + ds_cfg.bts_interrupt_threshold.offset)) = value;
+	unsigned long rlim, vm, pgsz;
+	void *buffer;
+
+	pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT;
+
+	rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
+	vm   = current->mm->total_vm  + pgsz;
+	if (rlim < vm)
+		return NULL;
+
+	rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
+	vm   = current->mm->locked_vm  + pgsz;
+	if (rlim < vm)
+		return NULL;
+
+	buffer = kzalloc(size, GFP_KERNEL);
+	if (!buffer)
+		return NULL;
+
+	current->mm->total_vm  += pgsz;
+	current->mm->locked_vm += pgsz;
+
+	if (pages)
+		*pages = pgsz;
+
+	return buffer;
 }
-static inline unsigned long get_from_ip(char *base)
+
+static int ds_request(struct task_struct *task, void *base, size_t size,
+		      ds_ovfl_callback_t ovfl, enum ds_qualifier qual)
 {
-	return *(unsigned long *)(base + ds_cfg.from_ip.offset);
+	struct ds_context *context;
+	unsigned long buffer, adj;
+	const unsigned long alignment = (1 << 3);
+	int error = 0;
+
+	if (!ds_cfg.sizeof_ds)
+		return -EOPNOTSUPP;
+
+	/* we require some space to do alignment adjustments below */
+	if (size < (alignment + ds_cfg.sizeof_rec[qual]))
+		return -EINVAL;
+
+	/* buffer overflow notification is not yet implemented */
+	if (ovfl)
+		return -EOPNOTSUPP;
+
+
+	spin_lock(&ds_lock);
+
+	if (!check_tracer(task))
+		return -EPERM;
+
+	error = -ENOMEM;
+	context = ds_alloc_context(task);
+	if (!context)
+		goto out_unlock;
+
+	error = -EALREADY;
+	if (context->owner[qual] == current)
+		goto out_unlock;
+	error = -EPERM;
+	if (context->owner[qual] != NULL)
+		goto out_unlock;
+	context->owner[qual] = current;
+
+	spin_unlock(&ds_lock);
+
+
+	error = -ENOMEM;
+	if (!base) {
+		base = ds_allocate_buffer(size, &context->pages[qual]);
+		if (!base)
+			goto out_release;
+
+		context->buffer[qual]   = base;
+	}
+	error = 0;
+
+	context->callback[qual] = ovfl;
+
+	/* adjust the buffer address and size to meet alignment
+	 * constraints:
+	 * - buffer is double-word aligned
+	 * - size is multiple of record size
+	 *
+	 * We checked the size at the very beginning; we have enough
+	 * space to do the adjustment.
+	 */
+	buffer = (unsigned long)base;
+
+	adj = ALIGN(buffer, alignment) - buffer;
+	buffer += adj;
+	size   -= adj;
+
+	size /= ds_cfg.sizeof_rec[qual];
+	size *= ds_cfg.sizeof_rec[qual];
+
+	ds_set(context->ds, qual, ds_buffer_base, buffer);
+	ds_set(context->ds, qual, ds_index, buffer);
+	ds_set(context->ds, qual, ds_absolute_maximum, buffer + size);
+
+	if (ovfl) {
+		/* todo: select a suitable interrupt threshold */
+	} else
+		ds_set(context->ds, qual,
+		       ds_interrupt_threshold, buffer + size + 1);
+
+	/* we keep the context until ds_release */
+	return error;
+
+ out_release:
+	context->owner[qual] = NULL;
+	ds_put_context(context);
+	return error;
+
+ out_unlock:
+	spin_unlock(&ds_lock);
+	ds_put_context(context);
+	return error;
 }
-static inline void set_from_ip(char *base, unsigned long value)
+
+int ds_request_bts(struct task_struct *task, void *base, size_t size,
+		   ds_ovfl_callback_t ovfl)
 {
-	(*(unsigned long *)(base + ds_cfg.from_ip.offset)) = value;
+	return ds_request(task, base, size, ovfl, ds_bts);
 }
-static inline unsigned long get_to_ip(char *base)
+
+int ds_request_pebs(struct task_struct *task, void *base, size_t size,
+		    ds_ovfl_callback_t ovfl)
 {
-	return *(unsigned long *)(base + ds_cfg.to_ip.offset);
+	return ds_request(task, base, size, ovfl, ds_pebs);
 }
-static inline void set_to_ip(char *base, unsigned long value)
+
+static int ds_release(struct task_struct *task, enum ds_qualifier qual)
 {
-	(*(unsigned long *)(base + ds_cfg.to_ip.offset)) = value;
+	struct ds_context *context;
+	int error;
+
+	context = ds_get_context(task);
+	error = ds_validate_access(context, qual);
+	if (error < 0)
+		goto out;
+
+	kfree(context->buffer[qual]);
+	context->buffer[qual] = NULL;
+
+	current->mm->total_vm  -= context->pages[qual];
+	current->mm->locked_vm -= context->pages[qual];
+	context->pages[qual] = 0;
+	context->owner[qual] = NULL;
+
+	/*
+	 * we put the context twice:
+	 *   once for the ds_get_context
+	 *   once for the corresponding ds_request
+	 */
+	ds_put_context(context);
+ out:
+	ds_put_context(context);
+	return error;
 }
-static inline unsigned char get_info_type(char *base)
+
+int ds_release_bts(struct task_struct *task)
 {
-	return *(unsigned char *)(base + ds_cfg.info_type.offset);
+	return ds_release(task, ds_bts);
 }
-static inline void set_info_type(char *base, unsigned char value)
+
+int ds_release_pebs(struct task_struct *task)
 {
-	(*(unsigned char *)(base + ds_cfg.info_type.offset)) = value;
+	return ds_release(task, ds_pebs);
 }
-static inline unsigned long get_info_data(char *base)
+
+static int ds_get_index(struct task_struct *task, size_t *pos,
+			enum ds_qualifier qual)
 {
-	return *(unsigned long *)(base + ds_cfg.info_data.offset);
+	struct ds_context *context;
+	unsigned long base, index;
+	int error;
+
+	context = ds_get_context(task);
+	error = ds_validate_access(context, qual);
+	if (error < 0)
+		goto out;
+
+	base  = ds_get(context->ds, qual, ds_buffer_base);
+	index = ds_get(context->ds, qual, ds_index);
+
+	error = ((index - base) / ds_cfg.sizeof_rec[qual]);
+	if (pos)
+		*pos = error;
+ out:
+	ds_put_context(context);
+	return error;
 }
-static inline void set_info_data(char *base, unsigned long value)
+
+int ds_get_bts_index(struct task_struct *task, size_t *pos)
 {
-	(*(unsigned long *)(base + ds_cfg.info_data.offset)) = value;
+	return ds_get_index(task, pos, ds_bts);
 }
 
+int ds_get_pebs_index(struct task_struct *task, size_t *pos)
+{
+	return ds_get_index(task, pos, ds_pebs);
+}
 
-int ds_allocate(void **dsp, size_t bts_size_in_bytes)
+static int ds_get_end(struct task_struct *task, size_t *pos,
+		      enum ds_qualifier qual)
 {
-	size_t bts_size_in_records;
-	unsigned long bts;
-	void *ds;
+	struct ds_context *context;
+	unsigned long base, end;
+	int error;
+
+	context = ds_get_context(task);
+	error = ds_validate_access(context, qual);
+	if (error < 0)
+		goto out;
+
+	base = ds_get(context->ds, qual, ds_buffer_base);
+	end  = ds_get(context->ds, qual, ds_absolute_maximum);
+
+	error = ((end - base) / ds_cfg.sizeof_rec[qual]);
+	if (pos)
+		*pos = error;
+ out:
+	ds_put_context(context);
+	return error;
+}
 
-	if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts)
-		return -EOPNOTSUPP;
+int ds_get_bts_end(struct task_struct *task, size_t *pos)
+{
+	return ds_get_end(task, pos, ds_bts);
+}
 
-	if (bts_size_in_bytes < 0)
-		return -EINVAL;
+int ds_get_pebs_end(struct task_struct *task, size_t *pos)
+{
+	return ds_get_end(task, pos, ds_pebs);
+}
 
-	bts_size_in_records =
-		bts_size_in_bytes / ds_cfg.sizeof_bts;
-	bts_size_in_bytes =
-		bts_size_in_records * ds_cfg.sizeof_bts;
+static int ds_access(struct task_struct *task, size_t index,
+		     const void **record, enum ds_qualifier qual)
+{
+	struct ds_context *context;
+	unsigned long base, idx;
+	int error;
 
-	if (bts_size_in_bytes <= 0)
+	if (!record)
 		return -EINVAL;
 
-	bts = (unsigned long)kzalloc(bts_size_in_bytes, GFP_KERNEL);
-
-	if (!bts)
-		return -ENOMEM;
+	context = ds_get_context(task);
+	error = ds_validate_access(context, qual);
+	if (error < 0)
+		goto out;
 
-	ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL);
+	base = ds_get(context->ds, qual, ds_buffer_base);
+	idx = base + (index * ds_cfg.sizeof_rec[qual]);
 
-	if (!ds) {
-		kfree((void *)bts);
-		return -ENOMEM;
-	}
-
-	set_bts_buffer_base(ds, bts);
-	set_bts_index(ds, bts);
-	set_bts_absolute_maximum(ds, bts + bts_size_in_bytes);
-	set_bts_interrupt_threshold(ds, bts + bts_size_in_bytes + 1);
+	error = -EINVAL;
+	if (idx > ds_get(context->ds, qual, ds_absolute_maximum))
+		goto out;
 
-	*dsp = ds;
-	return 0;
+	*record = (const void *)idx;
+	error = ds_cfg.sizeof_rec[qual];
+ out:
+	ds_put_context(context);
+	return error;
 }
 
-int ds_free(void **dsp)
+int ds_access_bts(struct task_struct *task, size_t index, const void **record)
 {
-	if (*dsp) {
-		kfree((void *)get_bts_buffer_base(*dsp));
-		kfree(*dsp);
-		*dsp = NULL;
-	}
-	return 0;
+	return ds_access(task, index, record, ds_bts);
 }
 
-int ds_get_bts_size(void *ds)
+int ds_access_pebs(struct task_struct *task, size_t index, const void **record)
 {
-	int size_in_bytes;
-
-	if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts)
-		return -EOPNOTSUPP;
-
-	if (!ds)
-		return 0;
-
-	size_in_bytes =
-		get_bts_absolute_maximum(ds) -
-		get_bts_buffer_base(ds);
-	return size_in_bytes;
+	return ds_access(task, index, record, ds_pebs);
 }
 
-int ds_get_bts_end(void *ds)
+static int ds_write(struct task_struct *task, const void *record, size_t size,
+		    enum ds_qualifier qual, int force)
 {
-	int size_in_bytes = ds_get_bts_size(ds);
-
-	if (size_in_bytes <= 0)
-		return size_in_bytes;
+	struct ds_context *context;
+	int error;
 
-	return size_in_bytes / ds_cfg.sizeof_bts;
-}
+	if (!record)
+		return -EINVAL;
 
-int ds_get_bts_index(void *ds)
-{
-	int index_offset_in_bytes;
+	error = -EPERM;
+	context = ds_get_context(task);
+	if (!context)
+		goto out;
 
-	if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts)
-		return -EOPNOTSUPP;
+	if (!force) {
+		error = ds_validate_access(context, qual);
+		if (error < 0)
+			goto out;
+	}
 
-	index_offset_in_bytes =
-		get_bts_index(ds) -
-		get_bts_buffer_base(ds);
+	error = 0;
+	while (size) {
+		unsigned long base, index, end, write_end, int_th;
+		unsigned long write_size, adj_write_size;
+
+		/*
+		 * write as much as possible without producing an
+		 * overflow interrupt.
+		 *
+		 * interrupt_threshold must either be
+		 * - bigger than absolute_maximum or
+		 * - point to a record between buffer_base and absolute_maximum
+		 *
+		 * index points to a valid record.
+		 */
+		base   = ds_get(context->ds, qual, ds_buffer_base);
+		index  = ds_get(context->ds, qual, ds_index);
+		end    = ds_get(context->ds, qual, ds_absolute_maximum);
+		int_th = ds_get(context->ds, qual, ds_interrupt_threshold);
+
+		write_end = min(end, int_th);
+
+		/* if we are already beyond the interrupt threshold,
+		 * we fill the entire buffer */
+		if (write_end <= index)
+			write_end = end;
+
+		if (write_end <= index)
+			goto out;
+
+		write_size = min((unsigned long) size, write_end - index);
+		memcpy((void *)index, record, write_size);
+
+		record = (const char *)record + write_size;
+		size  -= write_size;
+		error += write_size;
+
+		adj_write_size = write_size / ds_cfg.sizeof_rec[qual];
+		adj_write_size *= ds_cfg.sizeof_rec[qual];
+
+		/* zero out trailing bytes */
+		memset((char *)index + write_size, 0,
+		       adj_write_size - write_size);
+		index += adj_write_size;
+
+		if (index >= end)
+			index = base;
+		ds_set(context->ds, qual, ds_index, index);
+
+		if (index >= int_th)
+			ds_overflow(task, context, qual);
+	}
 
-	return index_offset_in_bytes / ds_cfg.sizeof_bts;
+ out:
+	ds_put_context(context);
+	return error;
 }
 
-int ds_set_overflow(void *ds, int method)
+int ds_write_bts(struct task_struct *task, const void *record, size_t size)
 {
-	switch (method) {
-	case DS_O_SIGNAL:
-		return -EOPNOTSUPP;
-	case DS_O_WRAP:
-		return 0;
-	default:
-		return -EINVAL;
-	}
+	return ds_write(task, record, size, ds_bts, /* force = */ 0);
 }
 
-int ds_get_overflow(void *ds)
+int ds_write_pebs(struct task_struct *task, const void *record, size_t size)
 {
-	return DS_O_WRAP;
+	return ds_write(task, record, size, ds_pebs, /* force = */ 0);
 }
 
-int ds_clear(void *ds)
+int ds_unchecked_write_bts(struct task_struct *task,
+			   const void *record, size_t size)
 {
-	int bts_size = ds_get_bts_size(ds);
-	unsigned long bts_base;
-
-	if (bts_size <= 0)
-		return bts_size;
-
-	bts_base = get_bts_buffer_base(ds);
-	memset((void *)bts_base, 0, bts_size);
-
-	set_bts_index(ds, bts_base);
-	return 0;
+	return ds_write(task, record, size, ds_bts, /* force = */ 1);
 }
 
-int ds_read_bts(void *ds, int index, struct bts_struct *out)
+int ds_unchecked_write_pebs(struct task_struct *task,
+			    const void *record, size_t size)
 {
-	void *bts;
+	return ds_write(task, record, size, ds_pebs, /* force = */ 1);
+}
 
-	if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts)
-		return -EOPNOTSUPP;
+static int ds_reset_or_clear(struct task_struct *task,
+			     enum ds_qualifier qual, int clear)
+{
+	struct ds_context *context;
+	unsigned long base, end;
+	int error;
 
-	if (index < 0)
-		return -EINVAL;
+	context = ds_get_context(task);
+	error = ds_validate_access(context, qual);
+	if (error < 0)
+		goto out;
 
-	if (index >= ds_get_bts_size(ds))
-		return -EINVAL;
+	base = ds_get(context->ds, qual, ds_buffer_base);
+	end  = ds_get(context->ds, qual, ds_absolute_maximum);
 
-	bts = (void *)(get_bts_buffer_base(ds) + (index * ds_cfg.sizeof_bts));
+	if (clear)
+		memset((void *)base, 0, end - base);
 
-	memset(out, 0, sizeof(*out));
-	if (get_from_ip(bts) == BTS_ESCAPE_ADDRESS) {
-		out->qualifier       = get_info_type(bts);
-		out->variant.jiffies = get_info_data(bts);
-	} else {
-		out->qualifier = BTS_BRANCH;
-		out->variant.lbr.from_ip = get_from_ip(bts);
-		out->variant.lbr.to_ip   = get_to_ip(bts);
-	}
+	ds_set(context->ds, qual, ds_index, base);
 
-	return sizeof(*out);;
+	error = 0;
+ out:
+	ds_put_context(context);
+	return error;
 }
 
-int ds_write_bts(void *ds, const struct bts_struct *in)
+int ds_reset_bts(struct task_struct *task)
 {
-	unsigned long bts;
-
-	if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts)
-		return -EOPNOTSUPP;
-
-	if (ds_get_bts_size(ds) <= 0)
-		return -ENXIO;
+	return ds_reset_or_clear(task, ds_bts, /* clear = */ 0);
+}
 
-	bts = get_bts_index(ds);
+int ds_reset_pebs(struct task_struct *task)
+{
+	return ds_reset_or_clear(task, ds_pebs, /* clear = */ 0);
+}
 
-	memset((void *)bts, 0, ds_cfg.sizeof_bts);
-	switch (in->qualifier) {
-	case BTS_INVALID:
-		break;
+int ds_clear_bts(struct task_struct *task)
+{
+	return ds_reset_or_clear(task, ds_bts, /* clear = */ 1);
+}
 
-	case BTS_BRANCH:
-		set_from_ip((void *)bts, in->variant.lbr.from_ip);
-		set_to_ip((void *)bts, in->variant.lbr.to_ip);
-		break;
+int ds_clear_pebs(struct task_struct *task)
+{
+	return ds_reset_or_clear(task, ds_pebs, /* clear = */ 1);
+}
 
-	case BTS_TASK_ARRIVES:
-	case BTS_TASK_DEPARTS:
-		set_from_ip((void *)bts, BTS_ESCAPE_ADDRESS);
-		set_info_type((void *)bts, in->qualifier);
-		set_info_data((void *)bts, in->variant.jiffies);
-		break;
+int ds_get_pebs_reset(struct task_struct *task, u64 *value)
+{
+	struct ds_context *context;
+	int error;
 
-	default:
+	if (!value)
 		return -EINVAL;
-	}
 
-	bts = bts + ds_cfg.sizeof_bts;
-	if (bts >= get_bts_absolute_maximum(ds))
-		bts = get_bts_buffer_base(ds);
-	set_bts_index(ds, bts);
+	context = ds_get_context(task);
+	error = ds_validate_access(context, ds_pebs);
+	if (error < 0)
+		goto out;
 
-	return ds_cfg.sizeof_bts;
+	*value = *(u64 *)(context->ds + (ds_cfg.sizeof_field * 8));
+
+	error = 0;
+ out:
+	ds_put_context(context);
+	return error;
 }
 
-unsigned long ds_debugctl_mask(void)
+int ds_set_pebs_reset(struct task_struct *task, u64 value)
 {
-	return ds_cfg.debugctl_mask;
-}
+	struct ds_context *context;
+	int error;
 
-#ifdef __i386__
-static const struct ds_configuration ds_cfg_netburst = {
-	.sizeof_ds = 9 * 4,
-	.bts_buffer_base = { 0, 4 },
-	.bts_index = { 4, 4 },
-	.bts_absolute_maximum = { 8, 4 },
-	.bts_interrupt_threshold = { 12, 4 },
-	.sizeof_bts = 3 * 4,
-	.from_ip = { 0, 4 },
-	.to_ip = { 4, 4 },
-	.info_type = { 4, 1 },
-	.info_data = { 8, 4 },
-	.debugctl_mask = (1<<2)|(1<<3)
-};
+	context = ds_get_context(task);
+	error = ds_validate_access(context, ds_pebs);
+	if (error < 0)
+		goto out;
 
-static const struct ds_configuration ds_cfg_pentium_m = {
-	.sizeof_ds = 9 * 4,
-	.bts_buffer_base = { 0, 4 },
-	.bts_index = { 4, 4 },
-	.bts_absolute_maximum = { 8, 4 },
-	.bts_interrupt_threshold = { 12, 4 },
-	.sizeof_bts = 3 * 4,
-	.from_ip = { 0, 4 },
-	.to_ip = { 4, 4 },
-	.info_type = { 4, 1 },
-	.info_data = { 8, 4 },
-	.debugctl_mask = (1<<6)|(1<<7)
+	*(u64 *)(context->ds + (ds_cfg.sizeof_field * 8)) = value;
+
+	error = 0;
+ out:
+	ds_put_context(context);
+	return error;
+}
+
+static const struct ds_configuration ds_cfg_var = {
+	.sizeof_ds    = sizeof(long) * 12,
+	.sizeof_field = sizeof(long),
+	.sizeof_rec[ds_bts]   = sizeof(long) * 3,
+	.sizeof_rec[ds_pebs]  = sizeof(long) * 10
 };
-#endif /* _i386_ */
-
-static const struct ds_configuration ds_cfg_core2 = {
-	.sizeof_ds = 9 * 8,
-	.bts_buffer_base = { 0, 8 },
-	.bts_index = { 8, 8 },
-	.bts_absolute_maximum = { 16, 8 },
-	.bts_interrupt_threshold = { 24, 8 },
-	.sizeof_bts = 3 * 8,
-	.from_ip = { 0, 8 },
-	.to_ip = { 8, 8 },
-	.info_type = { 8, 1 },
-	.info_data = { 16, 8 },
-	.debugctl_mask = (1<<6)|(1<<7)|(1<<9)
+static const struct ds_configuration ds_cfg_64 = {
+	.sizeof_ds    = 8 * 12,
+	.sizeof_field = 8,
+	.sizeof_rec[ds_bts]   = 8 * 3,
+	.sizeof_rec[ds_pebs]  = 8 * 10
 };
 
 static inline void
@@ -429,14 +821,13 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c)
 	switch (c->x86) {
 	case 0x6:
 		switch (c->x86_model) {
-#ifdef __i386__
 		case 0xD:
 		case 0xE: /* Pentium M */
-			ds_configure(&ds_cfg_pentium_m);
+			ds_configure(&ds_cfg_var);
 			break;
-#endif /* _i386_ */
 		case 0xF: /* Core2 */
-			ds_configure(&ds_cfg_core2);
+		case 0x1C: /* Atom */
+			ds_configure(&ds_cfg_64);
 			break;
 		default:
 			/* sorry, don't know about them */
@@ -445,13 +836,11 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c)
 		break;
 	case 0xF:
 		switch (c->x86_model) {
-#ifdef __i386__
 		case 0x0:
 		case 0x1:
 		case 0x2: /* Netburst */
-			ds_configure(&ds_cfg_netburst);
+			ds_configure(&ds_cfg_var);
 			break;
-#endif /* _i386_ */
 		default:
 			/* sorry, don't know about them */
 			break;
@@ -462,3 +851,14 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c)
 		break;
 	}
 }
+
+void ds_free(struct ds_context *context)
+{
+	/* This is called when the task owning the parameter context
+	 * is dying. There should not be any user of that context left
+	 * to disturb us, anymore. */
+	unsigned long leftovers = context->count;
+	while (leftovers--)
+		ds_put_context(context);
+}
+#endif /* CONFIG_X86_DS */
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
new file mode 100644
index 0000000..b361475
--- /dev/null
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -0,0 +1,449 @@
+/*
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
+ */
+#include <linux/kallsyms.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/utsname.h>
+#include <linux/hardirq.h>
+#include <linux/kdebug.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/kexec.h>
+#include <linux/bug.h>
+#include <linux/nmi.h>
+#include <linux/sysfs.h>
+
+#include <asm/stacktrace.h>
+
+#define STACKSLOTS_PER_LINE 8
+#define get_bp(bp) asm("movl %%ebp, %0" : "=r" (bp) :)
+
+int panic_on_unrecovered_nmi;
+int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
+static unsigned int code_bytes = 64;
+static int die_counter;
+
+void printk_address(unsigned long address, int reliable)
+{
+	printk(" [<%p>] %s%pS\n", (void *) address,
+			reliable ? "" : "? ", (void *) address);
+}
+
+static inline int valid_stack_ptr(struct thread_info *tinfo,
+			void *p, unsigned int size, void *end)
+{
+	void *t = tinfo;
+	if (end) {
+		if (p < end && p >= (end-THREAD_SIZE))
+			return 1;
+		else
+			return 0;
+	}
+	return p > t && p < t + THREAD_SIZE - size;
+}
+
+/* The form of the top of the frame on the stack */
+struct stack_frame {
+	struct stack_frame *next_frame;
+	unsigned long return_address;
+};
+
+static inline unsigned long
+print_context_stack(struct thread_info *tinfo,
+		unsigned long *stack, unsigned long bp,
+		const struct stacktrace_ops *ops, void *data,
+		unsigned long *end)
+{
+	struct stack_frame *frame = (struct stack_frame *)bp;
+
+	while (valid_stack_ptr(tinfo, stack, sizeof(*stack), end)) {
+		unsigned long addr;
+
+		addr = *stack;
+		if (__kernel_text_address(addr)) {
+			if ((unsigned long) stack == bp + sizeof(long)) {
+				ops->address(data, addr, 1);
+				frame = frame->next_frame;
+				bp = (unsigned long) frame;
+			} else {
+				ops->address(data, addr, bp == 0);
+			}
+		}
+		stack++;
+	}
+	return bp;
+}
+
+void dump_trace(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp,
+		const struct stacktrace_ops *ops, void *data)
+{
+	if (!task)
+		task = current;
+
+	if (!stack) {
+		unsigned long dummy;
+		stack = &dummy;
+		if (task && task != current)
+			stack = (unsigned long *)task->thread.sp;
+	}
+
+#ifdef CONFIG_FRAME_POINTER
+	if (!bp) {
+		if (task == current) {
+			/* Grab bp right from our regs */
+			get_bp(bp);
+		} else {
+			/* bp is the last reg pushed by switch_to */
+			bp = *(unsigned long *) task->thread.sp;
+		}
+	}
+#endif
+
+	for (;;) {
+		struct thread_info *context;
+
+		context = (struct thread_info *)
+			((unsigned long)stack & (~(THREAD_SIZE - 1)));
+		bp = print_context_stack(context, stack, bp, ops, data, NULL);
+
+		stack = (unsigned long *)context->previous_esp;
+		if (!stack)
+			break;
+		if (ops->stack(data, "IRQ") < 0)
+			break;
+		touch_nmi_watchdog();
+	}
+}
+EXPORT_SYMBOL(dump_trace);
+
+static void
+print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+	printk(data);
+	print_symbol(msg, symbol);
+	printk("\n");
+}
+
+static void print_trace_warning(void *data, char *msg)
+{
+	printk("%s%s\n", (char *)data, msg);
+}
+
+static int print_trace_stack(void *data, char *name)
+{
+	printk("%s <%s> ", (char *)data, name);
+	return 0;
+}
+
+/*
+ * Print one address/symbol entries per line.
+ */
+static void print_trace_address(void *data, unsigned long addr, int reliable)
+{
+	touch_nmi_watchdog();
+	printk(data);
+	printk_address(addr, reliable);
+}
+
+static const struct stacktrace_ops print_trace_ops = {
+	.warning = print_trace_warning,
+	.warning_symbol = print_trace_warning_symbol,
+	.stack = print_trace_stack,
+	.address = print_trace_address,
+};
+
+static void
+show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp, char *log_lvl)
+{
+	printk("%sCall Trace:\n", log_lvl);
+	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
+}
+
+void show_trace(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp)
+{
+	show_trace_log_lvl(task, regs, stack, bp, "");
+}
+
+static void
+show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *sp, unsigned long bp, char *log_lvl)
+{
+	unsigned long *stack;
+	int i;
+
+	if (sp == NULL) {
+		if (task)
+			sp = (unsigned long *)task->thread.sp;
+		else
+			sp = (unsigned long *)&sp;
+	}
+
+	stack = sp;
+	for (i = 0; i < kstack_depth_to_print; i++) {
+		if (kstack_end(stack))
+			break;
+		if (i && ((i % STACKSLOTS_PER_LINE) == 0))
+			printk("\n%s", log_lvl);
+		printk(" %08lx", *stack++);
+		touch_nmi_watchdog();
+	}
+	printk("\n");
+	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
+}
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+	show_stack_log_lvl(task, NULL, sp, 0, "");
+}
+
+/*
+ * The architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+	unsigned long bp = 0;
+	unsigned long stack;
+
+#ifdef CONFIG_FRAME_POINTER
+	if (!bp)
+		get_bp(bp);
+#endif
+
+	printk("Pid: %d, comm: %.20s %s %s %.*s\n",
+		current->pid, current->comm, print_tainted(),
+		init_utsname()->release,
+		(int)strcspn(init_utsname()->version, " "),
+		init_utsname()->version);
+	show_trace(NULL, NULL, &stack, bp);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void show_registers(struct pt_regs *regs)
+{
+	int i;
+
+	print_modules();
+	__show_regs(regs, 0);
+
+	printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)\n",
+		TASK_COMM_LEN, current->comm, task_pid_nr(current),
+		current_thread_info(), current, task_thread_info(current));
+	/*
+	 * When in-kernel, we also print out the stack and code at the
+	 * time of the fault..
+	 */
+	if (!user_mode_vm(regs)) {
+		unsigned int code_prologue = code_bytes * 43 / 64;
+		unsigned int code_len = code_bytes;
+		unsigned char c;
+		u8 *ip;
+
+		printk(KERN_EMERG "Stack:\n");
+		show_stack_log_lvl(NULL, regs, &regs->sp,
+				0, KERN_EMERG);
+
+		printk(KERN_EMERG "Code: ");
+
+		ip = (u8 *)regs->ip - code_prologue;
+		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
+			/* try starting at IP */
+			ip = (u8 *)regs->ip;
+			code_len = code_len - code_prologue + 1;
+		}
+		for (i = 0; i < code_len; i++, ip++) {
+			if (ip < (u8 *)PAGE_OFFSET ||
+					probe_kernel_address(ip, c)) {
+				printk(" Bad EIP value.");
+				break;
+			}
+			if (ip == (u8 *)regs->ip)
+				printk("<%02x> ", c);
+			else
+				printk("%02x ", c);
+		}
+	}
+	printk("\n");
+}
+
+int is_valid_bugaddr(unsigned long ip)
+{
+	unsigned short ud2;
+
+	if (ip < PAGE_OFFSET)
+		return 0;
+	if (probe_kernel_address((unsigned short *)ip, ud2))
+		return 0;
+
+	return ud2 == 0x0b0f;
+}
+
+static raw_spinlock_t die_lock = __RAW_SPIN_LOCK_UNLOCKED;
+static int die_owner = -1;
+static unsigned int die_nest_count;
+
+unsigned __kprobes long oops_begin(void)
+{
+	unsigned long flags;
+
+	oops_enter();
+
+	if (die_owner != raw_smp_processor_id()) {
+		console_verbose();
+		raw_local_irq_save(flags);
+		__raw_spin_lock(&die_lock);
+		die_owner = smp_processor_id();
+		die_nest_count = 0;
+		bust_spinlocks(1);
+	} else {
+		raw_local_irq_save(flags);
+	}
+	die_nest_count++;
+	return flags;
+}
+
+void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
+{
+	bust_spinlocks(0);
+	die_owner = -1;
+	add_taint(TAINT_DIE);
+	__raw_spin_unlock(&die_lock);
+	raw_local_irq_restore(flags);
+
+	if (!regs)
+		return;
+
+	if (kexec_should_crash(current))
+		crash_kexec(regs);
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+	if (panic_on_oops)
+		panic("Fatal exception");
+	oops_exit();
+	do_exit(signr);
+}
+
+int __kprobes __die(const char *str, struct pt_regs *regs, long err)
+{
+	unsigned short ss;
+	unsigned long sp;
+
+	printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
+#ifdef CONFIG_PREEMPT
+	printk("PREEMPT ");
+#endif
+#ifdef CONFIG_SMP
+	printk("SMP ");
+#endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	printk("DEBUG_PAGEALLOC");
+#endif
+	printk("\n");
+	sysfs_printk_last_file();
+	if (notify_die(DIE_OOPS, str, regs, err,
+			current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+		return 1;
+
+	show_registers(regs);
+	/* Executive summary in case the oops scrolled away */
+	sp = (unsigned long) (&regs->sp);
+	savesegment(ss, ss);
+	if (user_mode(regs)) {
+		sp = regs->sp;
+		ss = regs->ss & 0xffff;
+	}
+	printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip);
+	print_symbol("%s", regs->ip);
+	printk(" SS:ESP %04x:%08lx\n", ss, sp);
+	return 0;
+}
+
+/*
+ * This is gone through when something in the kernel has done something bad
+ * and is about to be terminated:
+ */
+void die(const char *str, struct pt_regs *regs, long err)
+{
+	unsigned long flags = oops_begin();
+
+	if (die_nest_count < 3) {
+		report_bug(regs->ip, regs);
+
+		if (__die(str, regs, err))
+			regs = NULL;
+	} else {
+		printk(KERN_EMERG "Recursive die() failure, output suppressed\n");
+	}
+
+	oops_end(flags, regs, SIGSEGV);
+}
+
+static DEFINE_SPINLOCK(nmi_print_lock);
+
+void notrace __kprobes
+die_nmi(char *str, struct pt_regs *regs, int do_panic)
+{
+	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
+		return;
+
+	spin_lock(&nmi_print_lock);
+	/*
+	* We are in trouble anyway, lets at least try
+	* to get a message out:
+	*/
+	bust_spinlocks(1);
+	printk(KERN_EMERG "%s", str);
+	printk(" on CPU%d, ip %08lx, registers:\n",
+		smp_processor_id(), regs->ip);
+	show_registers(regs);
+	if (do_panic)
+		panic("Non maskable interrupt");
+	console_silent();
+	spin_unlock(&nmi_print_lock);
+
+	/*
+	 * If we are in kernel we are probably nested up pretty bad
+	 * and might aswell get out now while we still can:
+	 */
+	if (!user_mode_vm(regs)) {
+		current->thread.trap_no = 2;
+		crash_kexec(regs);
+	}
+
+	bust_spinlocks(0);
+	do_exit(SIGSEGV);
+}
+
+static int __init oops_setup(char *s)
+{
+	if (!s)
+		return -EINVAL;
+	if (!strcmp(s, "panic"))
+		panic_on_oops = 1;
+	return 0;
+}
+early_param("oops", oops_setup);
+
+static int __init kstack_setup(char *s)
+{
+	if (!s)
+		return -EINVAL;
+	kstack_depth_to_print = simple_strtoul(s, NULL, 0);
+	return 0;
+}
+early_param("kstack", kstack_setup);
+
+static int __init code_bytes_setup(char *s)
+{
+	code_bytes = simple_strtoul(s, NULL, 0);
+	if (code_bytes > 8192)
+		code_bytes = 8192;
+
+	return 1;
+}
+__setup("code_bytes=", code_bytes_setup);
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
new file mode 100644
index 0000000..96a5db7
--- /dev/null
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -0,0 +1,575 @@
+/*
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
+ */
+#include <linux/kallsyms.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/utsname.h>
+#include <linux/hardirq.h>
+#include <linux/kdebug.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/kexec.h>
+#include <linux/bug.h>
+#include <linux/nmi.h>
+#include <linux/sysfs.h>
+
+#include <asm/stacktrace.h>
+
+#define STACKSLOTS_PER_LINE 4
+#define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :)
+
+int panic_on_unrecovered_nmi;
+int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
+static unsigned int code_bytes = 64;
+static int die_counter;
+
+void printk_address(unsigned long address, int reliable)
+{
+	printk(" [<%p>] %s%pS\n", (void *) address,
+			reliable ? "" : "? ", (void *) address);
+}
+
+static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
+					unsigned *usedp, char **idp)
+{
+	static char ids[][8] = {
+		[DEBUG_STACK - 1] = "#DB",
+		[NMI_STACK - 1] = "NMI",
+		[DOUBLEFAULT_STACK - 1] = "#DF",
+		[STACKFAULT_STACK - 1] = "#SS",
+		[MCE_STACK - 1] = "#MC",
+#if DEBUG_STKSZ > EXCEPTION_STKSZ
+		[N_EXCEPTION_STACKS ...
+			N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
+#endif
+	};
+	unsigned k;
+
+	/*
+	 * Iterate over all exception stacks, and figure out whether
+	 * 'stack' is in one of them:
+	 */
+	for (k = 0; k < N_EXCEPTION_STACKS; k++) {
+		unsigned long end = per_cpu(orig_ist, cpu).ist[k];
+		/*
+		 * Is 'stack' above this exception frame's end?
+		 * If yes then skip to the next frame.
+		 */
+		if (stack >= end)
+			continue;
+		/*
+		 * Is 'stack' above this exception frame's start address?
+		 * If yes then we found the right frame.
+		 */
+		if (stack >= end - EXCEPTION_STKSZ) {
+			/*
+			 * Make sure we only iterate through an exception
+			 * stack once. If it comes up for the second time
+			 * then there's something wrong going on - just
+			 * break out and return NULL:
+			 */
+			if (*usedp & (1U << k))
+				break;
+			*usedp |= 1U << k;
+			*idp = ids[k];
+			return (unsigned long *)end;
+		}
+		/*
+		 * If this is a debug stack, and if it has a larger size than
+		 * the usual exception stacks, then 'stack' might still
+		 * be within the lower portion of the debug stack:
+		 */
+#if DEBUG_STKSZ > EXCEPTION_STKSZ
+		if (k == DEBUG_STACK - 1 && stack >= end - DEBUG_STKSZ) {
+			unsigned j = N_EXCEPTION_STACKS - 1;
+
+			/*
+			 * Black magic. A large debug stack is composed of
+			 * multiple exception stack entries, which we
+			 * iterate through now. Dont look:
+			 */
+			do {
+				++j;
+				end -= EXCEPTION_STKSZ;
+				ids[j][4] = '1' + (j - N_EXCEPTION_STACKS);
+			} while (stack < end - EXCEPTION_STKSZ);
+			if (*usedp & (1U << j))
+				break;
+			*usedp |= 1U << j;
+			*idp = ids[j];
+			return (unsigned long *)end;
+		}
+#endif
+	}
+	return NULL;
+}
+
+/*
+ * x86-64 can have up to three kernel stacks:
+ * process stack
+ * interrupt stack
+ * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack
+ */
+
+static inline int valid_stack_ptr(struct thread_info *tinfo,
+			void *p, unsigned int size, void *end)
+{
+	void *t = tinfo;
+	if (end) {
+		if (p < end && p >= (end-THREAD_SIZE))
+			return 1;
+		else
+			return 0;
+	}
+	return p > t && p < t + THREAD_SIZE - size;
+}
+
+/* The form of the top of the frame on the stack */
+struct stack_frame {
+	struct stack_frame *next_frame;
+	unsigned long return_address;
+};
+
+static inline unsigned long
+print_context_stack(struct thread_info *tinfo,
+		unsigned long *stack, unsigned long bp,
+		const struct stacktrace_ops *ops, void *data,
+		unsigned long *end)
+{
+	struct stack_frame *frame = (struct stack_frame *)bp;
+
+	while (valid_stack_ptr(tinfo, stack, sizeof(*stack), end)) {
+		unsigned long addr;
+
+		addr = *stack;
+		if (__kernel_text_address(addr)) {
+			if ((unsigned long) stack == bp + sizeof(long)) {
+				ops->address(data, addr, 1);
+				frame = frame->next_frame;
+				bp = (unsigned long) frame;
+			} else {
+				ops->address(data, addr, bp == 0);
+			}
+		}
+		stack++;
+	}
+	return bp;
+}
+
+void dump_trace(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp,
+		const struct stacktrace_ops *ops, void *data)
+{
+	const unsigned cpu = get_cpu();
+	unsigned long *irqstack_end = (unsigned long *)cpu_pda(cpu)->irqstackptr;
+	unsigned used = 0;
+	struct thread_info *tinfo;
+
+	if (!task)
+		task = current;
+
+	if (!stack) {
+		unsigned long dummy;
+		stack = &dummy;
+		if (task && task != current)
+			stack = (unsigned long *)task->thread.sp;
+	}
+
+#ifdef CONFIG_FRAME_POINTER
+	if (!bp) {
+		if (task == current) {
+			/* Grab bp right from our regs */
+			get_bp(bp);
+		} else {
+			/* bp is the last reg pushed by switch_to */
+			bp = *(unsigned long *) task->thread.sp;
+		}
+	}
+#endif
+
+	/*
+	 * Print function call entries in all stacks, starting at the
+	 * current stack address. If the stacks consist of nested
+	 * exceptions
+	 */
+	tinfo = task_thread_info(task);
+	for (;;) {
+		char *id;
+		unsigned long *estack_end;
+		estack_end = in_exception_stack(cpu, (unsigned long)stack,
+						&used, &id);
+
+		if (estack_end) {
+			if (ops->stack(data, id) < 0)
+				break;
+
+			bp = print_context_stack(tinfo, stack, bp, ops,
+							data, estack_end);
+			ops->stack(data, "<EOE>");
+			/*
+			 * We link to the next stack via the
+			 * second-to-last pointer (index -2 to end) in the
+			 * exception stack:
+			 */
+			stack = (unsigned long *) estack_end[-2];
+			continue;
+		}
+		if (irqstack_end) {
+			unsigned long *irqstack;
+			irqstack = irqstack_end -
+				(IRQSTACKSIZE - 64) / sizeof(*irqstack);
+
+			if (stack >= irqstack && stack < irqstack_end) {
+				if (ops->stack(data, "IRQ") < 0)
+					break;
+				bp = print_context_stack(tinfo, stack, bp,
+						ops, data, irqstack_end);
+				/*
+				 * We link to the next stack (which would be
+				 * the process stack normally) the last
+				 * pointer (index -1 to end) in the IRQ stack:
+				 */
+				stack = (unsigned long *) (irqstack_end[-1]);
+				irqstack_end = NULL;
+				ops->stack(data, "EOI");
+				continue;
+			}
+		}
+		break;
+	}
+
+	/*
+	 * This handles the process stack:
+	 */
+	bp = print_context_stack(tinfo, stack, bp, ops, data, NULL);
+	put_cpu();
+}
+EXPORT_SYMBOL(dump_trace);
+
+static void
+print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+	printk(data);
+	print_symbol(msg, symbol);
+	printk("\n");
+}
+
+static void print_trace_warning(void *data, char *msg)
+{
+	printk("%s%s\n", (char *)data, msg);
+}
+
+static int print_trace_stack(void *data, char *name)
+{
+	printk("%s <%s> ", (char *)data, name);
+	return 0;
+}
+
+/*
+ * Print one address/symbol entries per line.
+ */
+static void print_trace_address(void *data, unsigned long addr, int reliable)
+{
+	touch_nmi_watchdog();
+	printk(data);
+	printk_address(addr, reliable);
+}
+
+static const struct stacktrace_ops print_trace_ops = {
+	.warning = print_trace_warning,
+	.warning_symbol = print_trace_warning_symbol,
+	.stack = print_trace_stack,
+	.address = print_trace_address,
+};
+
+static void
+show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp, char *log_lvl)
+{
+	printk("%sCall Trace:\n", log_lvl);
+	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
+}
+
+void show_trace(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp)
+{
+	show_trace_log_lvl(task, regs, stack, bp, "");
+}
+
+static void
+show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *sp, unsigned long bp, char *log_lvl)
+{
+	unsigned long *stack;
+	int i;
+	const int cpu = smp_processor_id();
+	unsigned long *irqstack_end =
+		(unsigned long *) (cpu_pda(cpu)->irqstackptr);
+	unsigned long *irqstack =
+		(unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE);
+
+	/*
+	 * debugging aid: "show_stack(NULL, NULL);" prints the
+	 * back trace for this cpu.
+	 */
+
+	if (sp == NULL) {
+		if (task)
+			sp = (unsigned long *)task->thread.sp;
+		else
+			sp = (unsigned long *)&sp;
+	}
+
+	stack = sp;
+	for (i = 0; i < kstack_depth_to_print; i++) {
+		if (stack >= irqstack && stack <= irqstack_end) {
+			if (stack == irqstack_end) {
+				stack = (unsigned long *) (irqstack_end[-1]);
+				printk(" <EOI> ");
+			}
+		} else {
+		if (((long) stack & (THREAD_SIZE-1)) == 0)
+			break;
+		}
+		if (i && ((i % STACKSLOTS_PER_LINE) == 0))
+			printk("\n%s", log_lvl);
+		printk(" %016lx", *stack++);
+		touch_nmi_watchdog();
+	}
+	printk("\n");
+	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
+}
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+	show_stack_log_lvl(task, NULL, sp, 0, "");
+}
+
+/*
+ * The architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+	unsigned long bp = 0;
+	unsigned long stack;
+
+#ifdef CONFIG_FRAME_POINTER
+	if (!bp)
+		get_bp(bp);
+#endif
+
+	printk("Pid: %d, comm: %.20s %s %s %.*s\n",
+		current->pid, current->comm, print_tainted(),
+		init_utsname()->release,
+		(int)strcspn(init_utsname()->version, " "),
+		init_utsname()->version);
+	show_trace(NULL, NULL, &stack, bp);
+}
+EXPORT_SYMBOL(dump_stack);
+
+void show_registers(struct pt_regs *regs)
+{
+	int i;
+	unsigned long sp;
+	const int cpu = smp_processor_id();
+	struct task_struct *cur = cpu_pda(cpu)->pcurrent;
+
+	sp = regs->sp;
+	printk("CPU %d ", cpu);
+	__show_regs(regs, 1);
+	printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
+		cur->comm, cur->pid, task_thread_info(cur), cur);
+
+	/*
+	 * When in-kernel, we also print out the stack and code at the
+	 * time of the fault..
+	 */
+	if (!user_mode(regs)) {
+		unsigned int code_prologue = code_bytes * 43 / 64;
+		unsigned int code_len = code_bytes;
+		unsigned char c;
+		u8 *ip;
+
+		printk(KERN_EMERG "Stack:\n");
+		show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
+				regs->bp, KERN_EMERG);
+
+		printk(KERN_EMERG "Code: ");
+
+		ip = (u8 *)regs->ip - code_prologue;
+		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
+			/* try starting at IP */
+			ip = (u8 *)regs->ip;
+			code_len = code_len - code_prologue + 1;
+		}
+		for (i = 0; i < code_len; i++, ip++) {
+			if (ip < (u8 *)PAGE_OFFSET ||
+					probe_kernel_address(ip, c)) {
+				printk(" Bad RIP value.");
+				break;
+			}
+			if (ip == (u8 *)regs->ip)
+				printk("<%02x> ", c);
+			else
+				printk("%02x ", c);
+		}
+	}
+	printk("\n");
+}
+
+int is_valid_bugaddr(unsigned long ip)
+{
+	unsigned short ud2;
+
+	if (__copy_from_user(&ud2, (const void __user *) ip, sizeof(ud2)))
+		return 0;
+
+	return ud2 == 0x0b0f;
+}
+
+static raw_spinlock_t die_lock = __RAW_SPIN_LOCK_UNLOCKED;
+static int die_owner = -1;
+static unsigned int die_nest_count;
+
+unsigned __kprobes long oops_begin(void)
+{
+	int cpu;
+	unsigned long flags;
+
+	oops_enter();
+
+	/* racy, but better than risking deadlock. */
+	raw_local_irq_save(flags);
+	cpu = smp_processor_id();
+	if (!__raw_spin_trylock(&die_lock)) {
+		if (cpu == die_owner)
+			/* nested oops. should stop eventually */;
+		else
+			__raw_spin_lock(&die_lock);
+	}
+	die_nest_count++;
+	die_owner = cpu;
+	console_verbose();
+	bust_spinlocks(1);
+	return flags;
+}
+
+void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
+{
+	die_owner = -1;
+	bust_spinlocks(0);
+	die_nest_count--;
+	if (!die_nest_count)
+		/* Nest count reaches zero, release the lock. */
+		__raw_spin_unlock(&die_lock);
+	raw_local_irq_restore(flags);
+	if (!regs) {
+		oops_exit();
+		return;
+	}
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+	if (panic_on_oops)
+		panic("Fatal exception");
+	oops_exit();
+	do_exit(signr);
+}
+
+int __kprobes __die(const char *str, struct pt_regs *regs, long err)
+{
+	printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
+#ifdef CONFIG_PREEMPT
+	printk("PREEMPT ");
+#endif
+#ifdef CONFIG_SMP
+	printk("SMP ");
+#endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	printk("DEBUG_PAGEALLOC");
+#endif
+	printk("\n");
+	sysfs_printk_last_file();
+	if (notify_die(DIE_OOPS, str, regs, err,
+			current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+		return 1;
+
+	show_registers(regs);
+	add_taint(TAINT_DIE);
+	/* Executive summary in case the oops scrolled away */
+	printk(KERN_ALERT "RIP ");
+	printk_address(regs->ip, 1);
+	printk(" RSP <%016lx>\n", regs->sp);
+	if (kexec_should_crash(current))
+		crash_kexec(regs);
+	return 0;
+}
+
+void die(const char *str, struct pt_regs *regs, long err)
+{
+	unsigned long flags = oops_begin();
+
+	if (!user_mode(regs))
+		report_bug(regs->ip, regs);
+
+	if (__die(str, regs, err))
+		regs = NULL;
+	oops_end(flags, regs, SIGSEGV);
+}
+
+notrace __kprobes void
+die_nmi(char *str, struct pt_regs *regs, int do_panic)
+{
+	unsigned long flags;
+
+	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
+		return;
+
+	flags = oops_begin();
+	/*
+	 * We are in trouble anyway, lets at least try
+	 * to get a message out.
+	 */
+	printk(KERN_EMERG "%s", str);
+	printk(" on CPU%d, ip %08lx, registers:\n",
+		smp_processor_id(), regs->ip);
+	show_registers(regs);
+	if (kexec_should_crash(current))
+		crash_kexec(regs);
+	if (do_panic || panic_on_oops)
+		panic("Non maskable interrupt");
+	oops_end(flags, NULL, SIGBUS);
+	nmi_exit();
+	local_irq_enable();
+	do_exit(SIGBUS);
+}
+
+static int __init oops_setup(char *s)
+{
+	if (!s)
+		return -EINVAL;
+	if (!strcmp(s, "panic"))
+		panic_on_oops = 1;
+	return 0;
+}
+early_param("oops", oops_setup);
+
+static int __init kstack_setup(char *s)
+{
+	if (!s)
+		return -EINVAL;
+	kstack_depth_to_print = simple_strtoul(s, NULL, 0);
+	return 0;
+}
+early_param("kstack", kstack_setup);
+
+static int __init code_bytes_setup(char *s)
+{
+	code_bytes = simple_strtoul(s, NULL, 0);
+	if (code_bytes > 8192)
+		code_bytes = 8192;
+
+	return 1;
+}
+__setup("code_bytes=", code_bytes_setup);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 66e48aa..ce97bf3 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -148,6 +148,9 @@ void __init e820_print_map(char *who)
 		case E820_NVS:
 			printk(KERN_CONT "(ACPI NVS)\n");
 			break;
+		case E820_UNUSABLE:
+			printk("(unusable)\n");
+			break;
 		default:
 			printk(KERN_CONT "type %u\n", e820.map[i].type);
 			break;
@@ -1260,6 +1263,7 @@ static inline const char *e820_type_to_string(int e820_type)
 	case E820_RAM:	return "System RAM";
 	case E820_ACPI:	return "ACPI Tables";
 	case E820_NVS:	return "ACPI Non-volatile Storage";
+	case E820_UNUSABLE:	return "Unusable memory";
 	default:	return "reserved";
 	}
 }
@@ -1267,6 +1271,7 @@ static inline const char *e820_type_to_string(int e820_type)
 /*
  * Mark e820 reserved areas as busy for the resource manager.
  */
+static struct resource __initdata *e820_res;
 void __init e820_reserve_resources(void)
 {
 	int i;
@@ -1274,20 +1279,26 @@ void __init e820_reserve_resources(void)
 	u64 end;
 
 	res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
+	e820_res = res;
 	for (i = 0; i < e820.nr_map; i++) {
 		end = e820.map[i].addr + e820.map[i].size - 1;
-#ifndef CONFIG_RESOURCES_64BIT
-		if (end > 0x100000000ULL) {
+		if (end != (resource_size_t)end) {
 			res++;
 			continue;
 		}
-#endif
 		res->name = e820_type_to_string(e820.map[i].type);
 		res->start = e820.map[i].addr;
 		res->end = end;
 
 		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		insert_resource(&iomem_resource, res);
+
+		/*
+		 * don't register the region that could be conflicted with
+		 * pci device BAR resource and insert them later in
+		 * pcibios_resource_survey()
+		 */
+		if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20))
+			insert_resource(&iomem_resource, res);
 		res++;
 	}
 
@@ -1299,6 +1310,19 @@ void __init e820_reserve_resources(void)
 	}
 }
 
+void __init e820_reserve_resources_late(void)
+{
+	int i;
+	struct resource *res;
+
+	res = e820_res;
+	for (i = 0; i < e820.nr_map; i++) {
+		if (!res->parent && res->end)
+			reserve_region_with_split(&iomem_resource, res->start, res->end, res->name);
+		res++;
+	}
+}
+
 char *__init default_machine_specific_memory_setup(void)
 {
 	char *who = "BIOS-e820";
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 4353cf5..3ce029f 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -95,6 +95,113 @@ static void __init nvidia_bugs(int num, int slot, int func)
 
 }
 
+#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
+static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
+{
+	u32 d;
+	u8  b;
+
+	b = read_pci_config_byte(num, slot, func, 0xac);
+	b &= ~(1<<5);
+	write_pci_config_byte(num, slot, func, 0xac, b);
+
+	d = read_pci_config(num, slot, func, 0x70);
+	d |= 1<<8;
+	write_pci_config(num, slot, func, 0x70, d);
+
+	d = read_pci_config(num, slot, func, 0x8);
+	d &= 0xff;
+	return d;
+}
+
+static void __init ati_bugs(int num, int slot, int func)
+{
+	u32 d;
+	u8  b;
+
+	if (acpi_use_timer_override)
+		return;
+
+	d = ati_ixp4x0_rev(num, slot, func);
+	if (d  < 0x82)
+		acpi_skip_timer_override = 1;
+	else {
+		/* check for IRQ0 interrupt swap */
+		outb(0x72, 0xcd6); b = inb(0xcd7);
+		if (!(b & 0x2))
+			acpi_skip_timer_override = 1;
+	}
+
+	if (acpi_skip_timer_override) {
+		printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
+		printk(KERN_INFO "Ignoring ACPI timer override.\n");
+		printk(KERN_INFO "If you got timer trouble "
+		       "try acpi_use_timer_override\n");
+	}
+}
+
+static u32 __init ati_sbx00_rev(int num, int slot, int func)
+{
+	u32 old, d;
+
+	d = read_pci_config(num, slot, func, 0x70);
+	old = d;
+	d &= ~(1<<8);
+	write_pci_config(num, slot, func, 0x70, d);
+	d = read_pci_config(num, slot, func, 0x8);
+	d &= 0xff;
+	write_pci_config(num, slot, func, 0x70, old);
+
+	return d;
+}
+
+static void __init ati_bugs_contd(int num, int slot, int func)
+{
+	u32 d, rev;
+
+	if (acpi_use_timer_override)
+		return;
+
+	rev = ati_sbx00_rev(num, slot, func);
+	if (rev > 0x13)
+		return;
+
+	/* check for IRQ0 interrupt swap */
+	d = read_pci_config(num, slot, func, 0x64);
+	if (!(d & (1<<14)))
+		acpi_skip_timer_override = 1;
+
+	if (acpi_skip_timer_override) {
+		printk(KERN_INFO "SB600 revision 0x%x\n", rev);
+		printk(KERN_INFO "Ignoring ACPI timer override.\n");
+		printk(KERN_INFO "If you got timer trouble "
+		       "try acpi_use_timer_override\n");
+	}
+}
+#else
+static void __init ati_bugs(int num, int slot, int func)
+{
+}
+
+static void __init ati_bugs_contd(int num, int slot, int func)
+{
+}
+#endif
+
+#ifdef CONFIG_DMAR
+static void __init intel_g33_dmar(int num, int slot, int func)
+{
+	struct acpi_table_header *dmar_tbl;
+	acpi_status status;
+
+	status = acpi_get_table(ACPI_SIG_DMAR, 0, &dmar_tbl);
+	if (ACPI_SUCCESS(status)) {
+		printk(KERN_INFO "BIOS BUG: DMAR advertised on Intel G31/G33 chipset -- ignoring\n");
+		dmar_disabled = 1;
+	}
+}
+#endif
+
 #define QFLAG_APPLY_ONCE 	0x1
 #define QFLAG_APPLIED		0x2
 #define QFLAG_DONE		(QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -114,6 +221,14 @@ static struct chipset early_qrk[] __initdata = {
 	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
 	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
 	  PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
+	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
+#ifdef CONFIG_DMAR
+	{ PCI_VENDOR_ID_INTEL, 0x29c0,
+	  PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, intel_g33_dmar },
+#endif
 	{}
 };
 
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index ff9e735..34ad997 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -3,11 +3,19 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/screen_info.h>
+#include <linux/usb/ch9.h>
+#include <linux/pci_regs.h>
+#include <linux/pci_ids.h>
+#include <linux/errno.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/fcntl.h>
 #include <asm/setup.h>
 #include <xen/hvc-console.h>
+#include <asm/pci-direct.h>
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#include <linux/usb/ehci_def.h>
 
 /* Simple VGA output */
 #define VGABASE		(__ISA_IO_base + 0xb8000)
@@ -78,6 +86,7 @@ static int early_serial_base = 0x3f8;  /* ttyS0 */
 static int early_serial_putc(unsigned char ch)
 {
 	unsigned timeout = 0xffff;
+
 	while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
 		cpu_relax();
 	outb(ch, early_serial_base + TXR);
@@ -111,7 +120,7 @@ static __init void early_serial_init(char *s)
 		if (!strncmp(s, "0x", 2)) {
 			early_serial_base = simple_strtoul(s, &e, 16);
 		} else {
-			static int bases[] = { 0x3f8, 0x2f8 };
+			static const int __initconst bases[] = { 0x3f8, 0x2f8 };
 
 			if (!strncmp(s, "ttyS", 4))
 				s += 4;
@@ -151,6 +160,721 @@ static struct console early_serial_console = {
 	.index =	-1,
 };
 
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+
+static struct ehci_caps __iomem *ehci_caps;
+static struct ehci_regs __iomem *ehci_regs;
+static struct ehci_dbg_port __iomem *ehci_debug;
+static unsigned int dbgp_endpoint_out;
+
+struct ehci_dev {
+	u32 bus;
+	u32 slot;
+	u32 func;
+};
+
+static struct ehci_dev ehci_dev;
+
+#define USB_DEBUG_DEVNUM 127
+
+#define DBGP_DATA_TOGGLE	0x8800
+
+static inline u32 dbgp_pid_update(u32 x, u32 tok)
+{
+	return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff);
+}
+
+static inline u32 dbgp_len_update(u32 x, u32 len)
+{
+	return (x & ~0x0f) | (len & 0x0f);
+}
+
+/*
+ * USB Packet IDs (PIDs)
+ */
+
+/* token */
+#define USB_PID_OUT		0xe1
+#define USB_PID_IN		0x69
+#define USB_PID_SOF		0xa5
+#define USB_PID_SETUP		0x2d
+/* handshake */
+#define USB_PID_ACK		0xd2
+#define USB_PID_NAK		0x5a
+#define USB_PID_STALL		0x1e
+#define USB_PID_NYET		0x96
+/* data */
+#define USB_PID_DATA0		0xc3
+#define USB_PID_DATA1		0x4b
+#define USB_PID_DATA2		0x87
+#define USB_PID_MDATA		0x0f
+/* Special */
+#define USB_PID_PREAMBLE	0x3c
+#define USB_PID_ERR		0x3c
+#define USB_PID_SPLIT		0x78
+#define USB_PID_PING		0xb4
+#define USB_PID_UNDEF_0		0xf0
+
+#define USB_PID_DATA_TOGGLE	0x88
+#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE)
+
+#define PCI_CAP_ID_EHCI_DEBUG	0xa
+
+#define HUB_ROOT_RESET_TIME	50	/* times are in msec */
+#define HUB_SHORT_RESET_TIME	10
+#define HUB_LONG_RESET_TIME	200
+#define HUB_RESET_TIMEOUT	500
+
+#define DBGP_MAX_PACKET		8
+
+static int dbgp_wait_until_complete(void)
+{
+	u32 ctrl;
+	int loop = 0x100000;
+
+	do {
+		ctrl = readl(&ehci_debug->control);
+		/* Stop when the transaction is finished */
+		if (ctrl & DBGP_DONE)
+			break;
+	} while (--loop > 0);
+
+	if (!loop)
+		return -1;
+
+	/*
+	 * Now that we have observed the completed transaction,
+	 * clear the done bit.
+	 */
+	writel(ctrl | DBGP_DONE, &ehci_debug->control);
+	return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
+}
+
+static void dbgp_mdelay(int ms)
+{
+	int i;
+
+	while (ms--) {
+		for (i = 0; i < 1000; i++)
+			outb(0x1, 0x80);
+	}
+}
+
+static void dbgp_breath(void)
+{
+	/* Sleep to give the debug port a chance to breathe */
+}
+
+static int dbgp_wait_until_done(unsigned ctrl)
+{
+	u32 pids, lpid;
+	int ret;
+	int loop = 3;
+
+retry:
+	writel(ctrl | DBGP_GO, &ehci_debug->control);
+	ret = dbgp_wait_until_complete();
+	pids = readl(&ehci_debug->pids);
+	lpid = DBGP_PID_GET(pids);
+
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * If the port is getting full or it has dropped data
+	 * start pacing ourselves, not necessary but it's friendly.
+	 */
+	if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET))
+		dbgp_breath();
+
+	/* If I get a NACK reissue the transmission */
+	if (lpid == USB_PID_NAK) {
+		if (--loop > 0)
+			goto retry;
+	}
+
+	return ret;
+}
+
+static void dbgp_set_data(const void *buf, int size)
+{
+	const unsigned char *bytes = buf;
+	u32 lo, hi;
+	int i;
+
+	lo = hi = 0;
+	for (i = 0; i < 4 && i < size; i++)
+		lo |= bytes[i] << (8*i);
+	for (; i < 8 && i < size; i++)
+		hi |= bytes[i] << (8*(i - 4));
+	writel(lo, &ehci_debug->data03);
+	writel(hi, &ehci_debug->data47);
+}
+
+static void dbgp_get_data(void *buf, int size)
+{
+	unsigned char *bytes = buf;
+	u32 lo, hi;
+	int i;
+
+	lo = readl(&ehci_debug->data03);
+	hi = readl(&ehci_debug->data47);
+	for (i = 0; i < 4 && i < size; i++)
+		bytes[i] = (lo >> (8*i)) & 0xff;
+	for (; i < 8 && i < size; i++)
+		bytes[i] = (hi >> (8*(i - 4))) & 0xff;
+}
+
+static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
+			 const char *bytes, int size)
+{
+	u32 pids, addr, ctrl;
+	int ret;
+
+	if (size > DBGP_MAX_PACKET)
+		return -1;
+
+	addr = DBGP_EPADDR(devnum, endpoint);
+
+	pids = readl(&ehci_debug->pids);
+	pids = dbgp_pid_update(pids, USB_PID_OUT);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, size);
+	ctrl |= DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	dbgp_set_data(bytes, size);
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+
+	ret = dbgp_wait_until_done(ctrl);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data,
+				 int size)
+{
+	u32 pids, addr, ctrl;
+	int ret;
+
+	if (size > DBGP_MAX_PACKET)
+		return -1;
+
+	addr = DBGP_EPADDR(devnum, endpoint);
+
+	pids = readl(&ehci_debug->pids);
+	pids = dbgp_pid_update(pids, USB_PID_IN);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, size);
+	ctrl &= ~DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+	ret = dbgp_wait_until_done(ctrl);
+	if (ret < 0)
+		return ret;
+
+	if (size > ret)
+		size = ret;
+	dbgp_get_data(data, size);
+	return ret;
+}
+
+static int dbgp_control_msg(unsigned devnum, int requesttype, int request,
+	int value, int index, void *data, int size)
+{
+	u32 pids, addr, ctrl;
+	struct usb_ctrlrequest req;
+	int read;
+	int ret;
+
+	read = (requesttype & USB_DIR_IN) != 0;
+	if (size > (read ? DBGP_MAX_PACKET:0))
+		return -1;
+
+	/* Compute the control message */
+	req.bRequestType = requesttype;
+	req.bRequest = request;
+	req.wValue = cpu_to_le16(value);
+	req.wIndex = cpu_to_le16(index);
+	req.wLength = cpu_to_le16(size);
+
+	pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP);
+	addr = DBGP_EPADDR(devnum, 0);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, sizeof(req));
+	ctrl |= DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	/* Send the setup message */
+	dbgp_set_data(&req, sizeof(req));
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+	ret = dbgp_wait_until_done(ctrl);
+	if (ret < 0)
+		return ret;
+
+	/* Read the result */
+	return dbgp_bulk_read(devnum, 0, data, size);
+}
+
+
+/* Find a PCI capability */
+static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap)
+{
+	u8 pos;
+	int bytes;
+
+	if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+		PCI_STATUS_CAP_LIST))
+		return 0;
+
+	pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
+		u8 id;
+
+		pos &= ~3;
+		id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+
+		pos = read_pci_config_byte(num, slot, func,
+						 pos+PCI_CAP_LIST_NEXT);
+	}
+	return 0;
+}
+
+static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func)
+{
+	u32 class;
+
+	class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
+	if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI)
+		return 0;
+
+	return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG);
+}
+
+static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc)
+{
+	u32 bus, slot, func;
+
+	for (bus = 0; bus < 256; bus++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
+				unsigned cap;
+
+				cap = __find_dbgp(bus, slot, func);
+
+				if (!cap)
+					continue;
+				if (ehci_num-- != 0)
+					continue;
+				*rbus = bus;
+				*rslot = slot;
+				*rfunc = func;
+				return cap;
+			}
+		}
+	}
+	return 0;
+}
+
+static int ehci_reset_port(int port)
+{
+	u32 portsc;
+	u32 delay_time, delay;
+	int loop;
+
+	/* Reset the usb debug port */
+	portsc = readl(&ehci_regs->port_status[port - 1]);
+	portsc &= ~PORT_PE;
+	portsc |= PORT_RESET;
+	writel(portsc, &ehci_regs->port_status[port - 1]);
+
+	delay = HUB_ROOT_RESET_TIME;
+	for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
+	     delay_time += delay) {
+		dbgp_mdelay(delay);
+
+		portsc = readl(&ehci_regs->port_status[port - 1]);
+		if (portsc & PORT_RESET) {
+			/* force reset to complete */
+			loop = 2;
+			writel(portsc & ~(PORT_RWC_BITS | PORT_RESET),
+				&ehci_regs->port_status[port - 1]);
+			do {
+				portsc = readl(&ehci_regs->port_status[port-1]);
+			} while ((portsc & PORT_RESET) && (--loop > 0));
+		}
+
+		/* Device went away? */
+		if (!(portsc & PORT_CONNECT))
+			return -ENOTCONN;
+
+		/* bomb out completely if something weird happend */
+		if ((portsc & PORT_CSC))
+			return -EINVAL;
+
+		/* If we've finished resetting, then break out of the loop */
+		if (!(portsc & PORT_RESET) && (portsc & PORT_PE))
+			return 0;
+	}
+	return -EBUSY;
+}
+
+static int ehci_wait_for_port(int port)
+{
+	u32 status;
+	int ret, reps;
+
+	for (reps = 0; reps < 3; reps++) {
+		dbgp_mdelay(100);
+		status = readl(&ehci_regs->status);
+		if (status & STS_PCD) {
+			ret = ehci_reset_port(port);
+			if (ret == 0)
+				return 0;
+		}
+	}
+	return -ENOTCONN;
+}
+
+#ifdef DBGP_DEBUG
+# define dbgp_printk early_printk
+#else
+static inline void dbgp_printk(const char *fmt, ...) { }
+#endif
+
+typedef void (*set_debug_port_t)(int port);
+
+static void default_set_debug_port(int port)
+{
+}
+
+static set_debug_port_t set_debug_port = default_set_debug_port;
+
+static void nvidia_set_debug_port(int port)
+{
+	u32 dword;
+	dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+				 0x74);
+	dword &= ~(0x0f<<12);
+	dword |= ((port & 0x0f)<<12);
+	write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74,
+				 dword);
+	dbgp_printk("set debug port to %d\n", port);
+}
+
+static void __init detect_set_debug_port(void)
+{
+	u32 vendorid;
+
+	vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+		 0x00);
+
+	if ((vendorid & 0xffff) == 0x10de) {
+		dbgp_printk("using nvidia set_debug_port\n");
+		set_debug_port = nvidia_set_debug_port;
+	}
+}
+
+static int __init ehci_setup(void)
+{
+	struct usb_debug_descriptor dbgp_desc;
+	u32 cmd, ctrl, status, portsc, hcs_params;
+	u32 debug_port, new_debug_port = 0, n_ports;
+	u32  devnum;
+	int ret, i;
+	int loop;
+	int port_map_tried;
+	int playtimes = 3;
+
+try_next_time:
+	port_map_tried = 0;
+
+try_next_port:
+
+	hcs_params = readl(&ehci_caps->hcs_params);
+	debug_port = HCS_DEBUG_PORT(hcs_params);
+	n_ports    = HCS_N_PORTS(hcs_params);
+
+	dbgp_printk("debug_port: %d\n", debug_port);
+	dbgp_printk("n_ports:    %d\n", n_ports);
+
+	for (i = 1; i <= n_ports; i++) {
+		portsc = readl(&ehci_regs->port_status[i-1]);
+		dbgp_printk("portstatus%d: %08x\n", i, portsc);
+	}
+
+	if (port_map_tried && (new_debug_port != debug_port)) {
+		if (--playtimes) {
+			set_debug_port(new_debug_port);
+			goto try_next_time;
+		}
+		return -1;
+	}
+
+	loop = 10;
+	/* Reset the EHCI controller */
+	cmd = readl(&ehci_regs->command);
+	cmd |= CMD_RESET;
+	writel(cmd, &ehci_regs->command);
+	do {
+		cmd = readl(&ehci_regs->command);
+	} while ((cmd & CMD_RESET) && (--loop > 0));
+
+	if (!loop) {
+		dbgp_printk("can not reset ehci\n");
+		return -1;
+	}
+	dbgp_printk("ehci reset done\n");
+
+	/* Claim ownership, but do not enable yet */
+	ctrl = readl(&ehci_debug->control);
+	ctrl |= DBGP_OWNER;
+	ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
+	writel(ctrl, &ehci_debug->control);
+
+	/* Start the ehci running */
+	cmd = readl(&ehci_regs->command);
+	cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
+	cmd |= CMD_RUN;
+	writel(cmd, &ehci_regs->command);
+
+	/* Ensure everything is routed to the EHCI */
+	writel(FLAG_CF, &ehci_regs->configured_flag);
+
+	/* Wait until the controller is no longer halted */
+	loop = 10;
+	do {
+		status = readl(&ehci_regs->status);
+	} while ((status & STS_HALT) && (--loop > 0));
+
+	if (!loop) {
+		dbgp_printk("ehci can be started\n");
+		return -1;
+	}
+	dbgp_printk("ehci started\n");
+
+	/* Wait for a device to show up in the debug port */
+	ret = ehci_wait_for_port(debug_port);
+	if (ret < 0) {
+		dbgp_printk("No device found in debug port\n");
+		goto next_debug_port;
+	}
+	dbgp_printk("ehci wait for port done\n");
+
+	/* Enable the debug port */
+	ctrl = readl(&ehci_debug->control);
+	ctrl |= DBGP_CLAIM;
+	writel(ctrl, &ehci_debug->control);
+	ctrl = readl(&ehci_debug->control);
+	if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
+		dbgp_printk("No device in debug port\n");
+		writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control);
+		goto err;
+	}
+	dbgp_printk("debug ported enabled\n");
+
+	/* Completely transfer the debug device to the debug controller */
+	portsc = readl(&ehci_regs->port_status[debug_port - 1]);
+	portsc &= ~PORT_PE;
+	writel(portsc, &ehci_regs->port_status[debug_port - 1]);
+
+	dbgp_mdelay(100);
+
+	/* Find the debug device and make it device number 127 */
+	for (devnum = 0; devnum <= 127; devnum++) {
+		ret = dbgp_control_msg(devnum,
+			USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0,
+			&dbgp_desc, sizeof(dbgp_desc));
+		if (ret > 0)
+			break;
+	}
+	if (devnum > 127) {
+		dbgp_printk("Could not find attached debug device\n");
+		goto err;
+	}
+	if (ret < 0) {
+		dbgp_printk("Attached device is not a debug device\n");
+		goto err;
+	}
+	dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint;
+
+	/* Move the device to 127 if it isn't already there */
+	if (devnum != USB_DEBUG_DEVNUM) {
+		ret = dbgp_control_msg(devnum,
+			USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
+		if (ret < 0) {
+			dbgp_printk("Could not move attached device to %d\n",
+				USB_DEBUG_DEVNUM);
+			goto err;
+		}
+		devnum = USB_DEBUG_DEVNUM;
+		dbgp_printk("debug device renamed to 127\n");
+	}
+
+	/* Enable the debug interface */
+	ret = dbgp_control_msg(USB_DEBUG_DEVNUM,
+		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
+	if (ret < 0) {
+		dbgp_printk(" Could not enable the debug device\n");
+		goto err;
+	}
+	dbgp_printk("debug interface enabled\n");
+
+	/* Perform a small write to get the even/odd data state in sync
+	 */
+	ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1);
+	if (ret < 0) {
+		dbgp_printk("dbgp_bulk_write failed: %d\n", ret);
+		goto err;
+	}
+	dbgp_printk("small write doned\n");
+
+	return 0;
+err:
+	/* Things didn't work so remove my claim */
+	ctrl = readl(&ehci_debug->control);
+	ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
+	writel(ctrl, &ehci_debug->control);
+	return -1;
+
+next_debug_port:
+	port_map_tried |= (1<<(debug_port - 1));
+	new_debug_port = ((debug_port-1+1)%n_ports) + 1;
+	if (port_map_tried != ((1<<n_ports) - 1)) {
+		set_debug_port(new_debug_port);
+		goto try_next_port;
+	}
+	if (--playtimes) {
+		set_debug_port(new_debug_port);
+		goto try_next_time;
+	}
+
+	return -1;
+}
+
+static int __init early_dbgp_init(char *s)
+{
+	u32 debug_port, bar, offset;
+	u32 bus, slot, func, cap;
+	void __iomem *ehci_bar;
+	u32 dbgp_num;
+	u32 bar_val;
+	char *e;
+	int ret;
+	u8 byte;
+
+	if (!early_pci_allowed())
+		return -1;
+
+	dbgp_num = 0;
+	if (*s)
+		dbgp_num = simple_strtoul(s, &e, 10);
+	dbgp_printk("dbgp_num: %d\n", dbgp_num);
+
+	cap = find_dbgp(dbgp_num, &bus, &slot, &func);
+	if (!cap)
+		return -1;
+
+	dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot,
+			 func);
+
+	debug_port = read_pci_config(bus, slot, func, cap);
+	bar = (debug_port >> 29) & 0x7;
+	bar = (bar * 4) + 0xc;
+	offset = (debug_port >> 16) & 0xfff;
+	dbgp_printk("bar: %02x offset: %03x\n", bar, offset);
+	if (bar != PCI_BASE_ADDRESS_0) {
+		dbgp_printk("only debug ports on bar 1 handled.\n");
+
+		return -1;
+	}
+
+	bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
+	dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset);
+	if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) {
+		dbgp_printk("only simple 32bit mmio bars supported\n");
+
+		return -1;
+	}
+
+	/* double check if the mem space is enabled */
+	byte = read_pci_config_byte(bus, slot, func, 0x04);
+	if (!(byte & 0x2)) {
+		byte  |= 0x02;
+		write_pci_config_byte(bus, slot, func, 0x04, byte);
+		dbgp_printk("mmio for ehci enabled\n");
+	}
+
+	/*
+	 * FIXME I don't have the bar size so just guess PAGE_SIZE is more
+	 * than enough.  1K is the biggest I have seen.
+	 */
+	set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK);
+	ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE);
+	ehci_bar += bar_val & ~PAGE_MASK;
+	dbgp_printk("ehci_bar: %p\n", ehci_bar);
+
+	ehci_caps  = ehci_bar;
+	ehci_regs  = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase));
+	ehci_debug = ehci_bar + offset;
+	ehci_dev.bus = bus;
+	ehci_dev.slot = slot;
+	ehci_dev.func = func;
+
+	detect_set_debug_port();
+
+	ret = ehci_setup();
+	if (ret < 0) {
+		dbgp_printk("ehci_setup failed\n");
+		ehci_debug = NULL;
+
+		return -1;
+	}
+
+	return 0;
+}
+
+static void early_dbgp_write(struct console *con, const char *str, u32 n)
+{
+	int chunk, ret;
+
+	if (!ehci_debug)
+		return;
+	while (n > 0) {
+		chunk = n;
+		if (chunk > DBGP_MAX_PACKET)
+			chunk = DBGP_MAX_PACKET;
+		ret = dbgp_bulk_write(USB_DEBUG_DEVNUM,
+			dbgp_endpoint_out, str, chunk);
+		str += chunk;
+		n -= chunk;
+	}
+}
+
+static struct console early_dbgp_console = {
+	.name =		"earlydbg",
+	.write =	early_dbgp_write,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+#endif
+
 /* Console interface to a host file on AMD's SimNow! */
 
 static int simnow_fd;
@@ -165,6 +889,7 @@ enum {
 static noinline long simnow(long cmd, long a, long b, long c)
 {
 	long ret;
+
 	asm volatile("cpuid" :
 		     "=a" (ret) :
 		     "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2));
@@ -174,6 +899,7 @@ static noinline long simnow(long cmd, long a, long b, long c)
 static void __init simnow_init(char *str)
 {
 	char *fn = "klog";
+
 	if (*str == '=')
 		fn = ++str;
 	/* error ignored */
@@ -194,7 +920,7 @@ static struct console simnow_console = {
 
 /* Direct interface for emergencies */
 static struct console *early_console = &early_vga_console;
-static int early_console_initialized;
+static int __initdata early_console_initialized;
 
 asmlinkage void early_printk(const char *fmt, ...)
 {
@@ -208,10 +934,11 @@ asmlinkage void early_printk(const char *fmt, ...)
 	va_end(ap);
 }
 
-static int __initdata keep_early;
 
 static int __init setup_early_printk(char *buf)
 {
+	int keep_early;
+
 	if (!buf)
 		return 0;
 
@@ -219,8 +946,7 @@ static int __init setup_early_printk(char *buf)
 		return 0;
 	early_console_initialized = 1;
 
-	if (strstr(buf, "keep"))
-		keep_early = 1;
+	keep_early = (strstr(buf, "keep") != NULL);
 
 	if (!strncmp(buf, "serial", 6)) {
 		early_serial_init(buf + 6);
@@ -238,6 +964,17 @@ static int __init setup_early_printk(char *buf)
 		simnow_init(buf + 6);
 		early_console = &simnow_console;
 		keep_early = 1;
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+	} else if (!strncmp(buf, "dbgp", 4)) {
+		if (early_dbgp_init(buf+4) < 0)
+			return 0;
+		early_console = &early_dbgp_console;
+		/*
+		 * usb subsys will reset ehci controller, so don't keep
+		 * that early console
+		 */
+		keep_early = 0;
+#endif
 #ifdef CONFIG_HVC_XEN
 	} else if (!strncmp(buf, "xen", 3)) {
 		early_console = &xenboot_console;
@@ -251,4 +988,5 @@ static int __init setup_early_printk(char *buf)
 	register_console(early_console);
 	return 0;
 }
+
 early_param("earlyprintk", setup_early_printk);
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 06cc8d4..1119d24 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -367,6 +367,10 @@ void __init efi_init(void)
 			efi.smbios = config_tables[i].table;
 			printk(" SMBIOS=0x%lx ", config_tables[i].table);
 		} else if (!efi_guidcmp(config_tables[i].guid,
+					UV_SYSTEM_TABLE_GUID)) {
+			efi.uv_systab = config_tables[i].table;
+			printk(" UVsystab=0x%lx ", config_tables[i].table);
+		} else if (!efi_guidcmp(config_tables[i].guid,
 					HCDP_TABLE_GUID)) {
 			efi.hcdp = config_tables[i].table;
 			printk(" HCDP=0x%lx ", config_tables[i].table);
@@ -414,9 +418,11 @@ void __init efi_init(void)
 	if (memmap.map == NULL)
 		printk(KERN_ERR "Could not map the EFI memory map!\n");
 	memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size);
+
 	if (memmap.desc_size != sizeof(efi_memory_desc_t))
-		printk(KERN_WARNING "Kernel-defined memdesc"
-		       "doesn't match the one from EFI!\n");
+		printk(KERN_WARNING
+		  "Kernel-defined memdesc doesn't match the one from EFI!\n");
+
 	if (add_efi_memmap)
 		do_add_efi_memmap();
 
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 109792b..dd65143 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -629,7 +629,7 @@ ENTRY(interrupt)
 ENTRY(irq_entries_start)
 	RING0_INT_FRAME
 vector=0
-.rept NR_IRQS
+.rept NR_VECTORS
 	ALIGN
  .if vector
 	CFI_ADJUST_CFA_OFFSET -4
@@ -730,6 +730,7 @@ error_code:
 	movl $(__USER_DS), %ecx
 	movl %ecx, %ds
 	movl %ecx, %es
+	TRACE_IRQS_OFF
 	movl %esp,%eax			# pt_regs pointer
 	call *%edi
 	jmp ret_from_exception
@@ -760,20 +761,9 @@ ENTRY(device_not_available)
 	RING0_INT_FRAME
 	pushl $-1			# mark this as an int
 	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
-	GET_CR0_INTO_EAX
-	testl $0x4, %eax		# EM (math emulation bit)
-	jne device_not_available_emulate
-	preempt_stop(CLBR_ANY)
-	call math_state_restore
-	jmp ret_from_exception
-device_not_available_emulate:
-	pushl $0			# temporary storage for ORIG_EIP
+	pushl $do_device_not_available
 	CFI_ADJUST_CFA_OFFSET 4
-	call math_emulate
-	addl $4, %esp
-	CFI_ADJUST_CFA_OFFSET -4
-	jmp ret_from_exception
+	jmp error_code
 	CFI_ENDPROC
 END(device_not_available)
 
@@ -814,6 +804,7 @@ debug_stack_correct:
 	pushl $-1			# mark this as an int
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
+	TRACE_IRQS_OFF
 	xorl %edx,%edx			# error code 0
 	movl %esp,%eax			# pt_regs pointer
 	call do_debug
@@ -858,6 +849,7 @@ nmi_stack_correct:
 	pushl %eax
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
+	TRACE_IRQS_OFF
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
 	call do_nmi
@@ -898,6 +890,7 @@ nmi_espfix_stack:
 	pushl %eax
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
+	TRACE_IRQS_OFF
 	FIXUP_ESPFIX_STACK		# %eax == %esp
 	xorl %edx,%edx			# zero error code
 	call do_nmi
@@ -928,6 +921,7 @@ KPROBE_ENTRY(int3)
 	pushl $-1			# mark this as an int
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
+	TRACE_IRQS_OFF
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
 	call do_int3
@@ -1159,20 +1153,6 @@ ENDPROC(xen_failsafe_callback)
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 ENTRY(mcount)
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	movl 0xc(%esp), %eax
-	subl $MCOUNT_INSN_SIZE, %eax
-
-.globl mcount_call
-mcount_call:
-	call ftrace_stub
-
-	popl %edx
-	popl %ecx
-	popl %eax
-
 	ret
 END(mcount)
 
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 89434d4..09e7145 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -64,32 +64,6 @@
 #ifdef CONFIG_FTRACE
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(mcount)
-
-	subq $0x38, %rsp
-	movq %rax, (%rsp)
-	movq %rcx, 8(%rsp)
-	movq %rdx, 16(%rsp)
-	movq %rsi, 24(%rsp)
-	movq %rdi, 32(%rsp)
-	movq %r8, 40(%rsp)
-	movq %r9, 48(%rsp)
-
-	movq 0x38(%rsp), %rdi
-	subq $MCOUNT_INSN_SIZE, %rdi
-
-.globl mcount_call
-mcount_call:
-	call ftrace_stub
-
-	movq 48(%rsp), %r9
-	movq 40(%rsp), %r8
-	movq 32(%rsp), %rdi
-	movq 24(%rsp), %rsi
-	movq 16(%rsp), %rdx
-	movq 8(%rsp), %rcx
-	movq (%rsp), %rax
-	addq $0x38, %rsp
-
 	retq
 END(mcount)
 
@@ -275,9 +249,9 @@ ENTRY(native_usergs_sysret64)
 ENTRY(ret_from_fork)
 	CFI_DEFAULT_STACK
 	push kernel_eflags(%rip)
-	CFI_ADJUST_CFA_OFFSET 4
+	CFI_ADJUST_CFA_OFFSET 8
 	popf				# reset kernel eflags
-	CFI_ADJUST_CFA_OFFSET -4
+	CFI_ADJUST_CFA_OFFSET -8
 	call schedule_tail
 	GET_THREAD_INFO(%rcx)
 	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
@@ -667,6 +641,13 @@ END(stub_rt_sigreturn)
 	SAVE_ARGS
 	leaq -ARGOFFSET(%rsp),%rdi	# arg1 for handler
 	pushq %rbp
+	/*
+	 * Save rbp twice: One is for marking the stack frame, as usual, and the
+	 * other, to fill pt_regs properly. This is because bx comes right
+	 * before the last saved register in that structure, and not bp. If the
+	 * base pointer were in the place bx is today, this would not be needed.
+	 */
+	movq %rbp, -8(%rsp)
 	CFI_ADJUST_CFA_OFFSET	8
 	CFI_REL_OFFSET		rbp, 0
 	movq %rsp,%rbp
@@ -932,6 +913,9 @@ END(spurious_interrupt)
 	.if \ist
 	movq	%gs:pda_data_offset, %rbp
 	.endif
+	.if \irqtrace
+	TRACE_IRQS_OFF
+	.endif
 	movq %rsp,%rdi
 	movq ORIG_RAX(%rsp),%rsi
 	movq $-1,ORIG_RAX(%rsp)
@@ -1058,7 +1042,8 @@ KPROBE_ENTRY(error_entry)
 	je  error_kernelspace
 error_swapgs:	
 	SWAPGS
-error_sti:	
+error_sti:
+	TRACE_IRQS_OFF
 	movq %rdi,RDI(%rsp) 	
 	CFI_REL_OFFSET	rdi,RDI
 	movq %rsp,%rdi
@@ -1232,7 +1217,7 @@ ENTRY(simd_coprocessor_error)
 END(simd_coprocessor_error)
 
 ENTRY(device_not_available)
-	zeroentry math_state_restore
+	zeroentry do_device_not_available
 END(device_not_available)
 
 	/* runs on exception stack */
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
new file mode 100644
index 0000000..f454c78f
--- /dev/null
+++ b/arch/x86/kernel/es7000_32.c
@@ -0,0 +1,363 @@
+/*
+ * Written by: Garry Forsgren, Unisys Corporation
+ *             Natalie Protasevich, Unisys Corporation
+ * This file contains the code to configure and interface
+ * with Unisys ES7000 series hardware system manager.
+ *
+ * Copyright (c) 2003 Unisys Corporation.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Contact information: Unisys Corporation, Township Line & Union Meeting
+ * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
+ *
+ * http://www.unisys.com
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <asm/io.h>
+#include <asm/nmi.h>
+#include <asm/smp.h>
+#include <asm/apicdef.h>
+#include <mach_mpparse.h>
+
+/*
+ * ES7000 chipsets
+ */
+
+#define NON_UNISYS		0
+#define ES7000_CLASSIC		1
+#define ES7000_ZORRO		2
+
+
+#define	MIP_REG			1
+#define	MIP_PSAI_REG		4
+
+#define	MIP_BUSY		1
+#define	MIP_SPIN		0xf0000
+#define	MIP_VALID		0x0100000000000000ULL
+#define	MIP_PORT(VALUE)	((VALUE >> 32) & 0xffff)
+
+#define	MIP_RD_LO(VALUE)	(VALUE & 0xffffffff)
+
+struct mip_reg_info {
+	unsigned long long mip_info;
+	unsigned long long delivery_info;
+	unsigned long long host_reg;
+	unsigned long long mip_reg;
+};
+
+struct part_info {
+	unsigned char type;
+	unsigned char length;
+	unsigned char part_id;
+	unsigned char apic_mode;
+	unsigned long snum;
+	char ptype[16];
+	char sname[64];
+	char pname[64];
+};
+
+struct psai {
+	unsigned long long entry_type;
+	unsigned long long addr;
+	unsigned long long bep_addr;
+};
+
+struct es7000_mem_info {
+	unsigned char type;
+	unsigned char length;
+	unsigned char resv[6];
+	unsigned long long  start;
+	unsigned long long  size;
+};
+
+struct es7000_oem_table {
+	unsigned long long hdr;
+	struct mip_reg_info mip;
+	struct part_info pif;
+	struct es7000_mem_info shm;
+	struct psai psai;
+};
+
+#ifdef CONFIG_ACPI
+
+struct oem_table {
+	struct acpi_table_header Header;
+	u32 OEMTableAddr;
+	u32 OEMTableSize;
+};
+
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
+#endif
+
+struct mip_reg {
+	unsigned long long off_0;
+	unsigned long long off_8;
+	unsigned long long off_10;
+	unsigned long long off_18;
+	unsigned long long off_20;
+	unsigned long long off_28;
+	unsigned long long off_30;
+	unsigned long long off_38;
+};
+
+#define	MIP_SW_APIC		0x1020b
+#define	MIP_FUNC(VALUE)		(VALUE & 0xff)
+
+/*
+ * ES7000 Globals
+ */
+
+static volatile unsigned long	*psai = NULL;
+static struct mip_reg		*mip_reg;
+static struct mip_reg		*host_reg;
+static int 			mip_port;
+static unsigned long		mip_addr, host_addr;
+
+int es7000_plat;
+
+/*
+ * GSI override for ES7000 platforms.
+ */
+
+static unsigned int base;
+
+static int
+es7000_rename_gsi(int ioapic, int gsi)
+{
+	if (es7000_plat == ES7000_ZORRO)
+		return gsi;
+
+	if (!base) {
+		int i;
+		for (i = 0; i < nr_ioapics; i++)
+			base += nr_ioapic_registers[i];
+	}
+
+	if (!ioapic && (gsi < 16))
+		gsi += base;
+	return gsi;
+}
+
+void __init
+setup_unisys(void)
+{
+	/*
+	 * Determine the generation of the ES7000 currently running.
+	 *
+	 * es7000_plat = 1 if the machine is a 5xx ES7000 box
+	 * es7000_plat = 2 if the machine is a x86_64 ES7000 box
+	 *
+	 */
+	if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
+		es7000_plat = ES7000_ZORRO;
+	else
+		es7000_plat = ES7000_CLASSIC;
+	ioapic_renumber_irq = es7000_rename_gsi;
+}
+
+/*
+ * Parse the OEM Table
+ */
+
+int __init
+parse_unisys_oem (char *oemptr)
+{
+	int                     i;
+	int 			success = 0;
+	unsigned char           type, size;
+	unsigned long           val;
+	char                    *tp = NULL;
+	struct psai             *psaip = NULL;
+	struct mip_reg_info 	*mi;
+	struct mip_reg		*host, *mip;
+
+	tp = oemptr;
+
+	tp += 8;
+
+	for (i=0; i <= 6; i++) {
+		type = *tp++;
+		size = *tp++;
+		tp -= 2;
+		switch (type) {
+		case MIP_REG:
+			mi = (struct mip_reg_info *)tp;
+			val = MIP_RD_LO(mi->host_reg);
+			host_addr = val;
+			host = (struct mip_reg *)val;
+			host_reg = __va(host);
+			val = MIP_RD_LO(mi->mip_reg);
+			mip_port = MIP_PORT(mi->mip_info);
+			mip_addr = val;
+			mip = (struct mip_reg *)val;
+			mip_reg = __va(mip);
+			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+				 (unsigned long)host_reg);
+			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+				 (unsigned long)mip_reg);
+			success++;
+			break;
+		case MIP_PSAI_REG:
+			psaip = (struct psai *)tp;
+			if (tp != NULL) {
+				if (psaip->addr)
+					psai = __va(psaip->addr);
+				else
+					psai = NULL;
+				success++;
+			}
+			break;
+		default:
+			break;
+		}
+		tp += size;
+	}
+
+	if (success < 2) {
+		es7000_plat = NON_UNISYS;
+	} else
+		setup_unisys();
+	return es7000_plat;
+}
+
+#ifdef CONFIG_ACPI
+static unsigned long oem_addrX;
+static unsigned long oem_size;
+int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
+{
+	struct acpi_table_header *header = NULL;
+	int i = 0;
+	acpi_size tbl_size;
+
+	while (ACPI_SUCCESS(acpi_get_table_with_size("OEM1", i++, &header, &tbl_size))) {
+		if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
+			struct oem_table *t = (struct oem_table *)header;
+
+			oem_addrX = t->OEMTableAddr;
+			oem_size = t->OEMTableSize;
+			early_acpi_os_unmap_memory(header, tbl_size);
+
+			*oem_addr = (unsigned long)__acpi_map_table(oem_addrX,
+								    oem_size);
+			return 0;
+		}
+		early_acpi_os_unmap_memory(header, tbl_size);
+	}
+	return -1;
+}
+
+void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
+{
+	if (!oem_addr)
+		return;
+
+	__acpi_unmap_table((char *)oem_addr, oem_size);
+}
+#endif
+
+static void
+es7000_spin(int n)
+{
+	int i = 0;
+
+	while (i++ < n)
+		rep_nop();
+}
+
+static int __init
+es7000_mip_write(struct mip_reg *mip_reg)
+{
+	int			status = 0;
+	int			spin;
+
+	spin = MIP_SPIN;
+	while (((unsigned long long)host_reg->off_38 &
+		(unsigned long long)MIP_VALID) != 0) {
+			if (--spin <= 0) {
+				printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
+				return -1;
+			}
+		es7000_spin(MIP_SPIN);
+	}
+
+	memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
+	outb(1, mip_port);
+
+	spin = MIP_SPIN;
+
+	while (((unsigned long long)mip_reg->off_38 &
+		(unsigned long long)MIP_VALID) == 0) {
+		if (--spin <= 0) {
+			printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
+			return -1;
+		}
+		es7000_spin(MIP_SPIN);
+	}
+
+	status = ((unsigned long long)mip_reg->off_0 &
+		(unsigned long long)0xffff0000000000ULL) >> 48;
+	mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 &
+		(unsigned long long)~MIP_VALID);
+	return status;
+}
+
+int
+es7000_start_cpu(int cpu, unsigned long eip)
+{
+	unsigned long vect = 0, psaival = 0;
+
+	if (psai == NULL)
+		return -1;
+
+	vect = ((unsigned long)__pa(eip)/0x1000) << 16;
+	psaival = (0x1000000 | vect | cpu);
+
+	while (*psai & 0x1000000)
+                ;
+
+	*psai = psaival;
+
+	return 0;
+
+}
+
+void __init
+es7000_sw_apic(void)
+{
+	if (es7000_plat) {
+		int mip_status;
+		struct mip_reg es7000_mip_reg;
+
+		printk("ES7000: Enabling APIC mode.\n");
+        	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
+        	es7000_mip_reg.off_0 = MIP_SW_APIC;
+        	es7000_mip_reg.off_38 = (MIP_VALID);
+        	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
+              		printk("es7000_sw_apic: command failed, status = %x\n",
+				mip_status);
+		return;
+	}
+}
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index ab115cd..d073d98 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -11,17 +11,18 @@
 
 #include <linux/spinlock.h>
 #include <linux/hardirq.h>
+#include <linux/uaccess.h>
 #include <linux/ftrace.h>
 #include <linux/percpu.h>
 #include <linux/init.h>
 #include <linux/list.h>
 
-#include <asm/alternative.h>
 #include <asm/ftrace.h>
+#include <asm/nops.h>
 
 
 /* Long is fine, even if it is only 4 bytes ;-) */
-static long *ftrace_nop;
+static unsigned long *ftrace_nop;
 
 union ftrace_code_union {
 	char code[MCOUNT_INSN_SIZE];
@@ -60,11 +61,7 @@ notrace int
 ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 		   unsigned char *new_code)
 {
-	unsigned replaced;
-	unsigned old = *(unsigned *)old_code; /* 4 bytes */
-	unsigned new = *(unsigned *)new_code; /* 4 bytes */
-	unsigned char newch = new_code[4];
-	int faulted = 0;
+	unsigned char replaced[MCOUNT_INSN_SIZE];
 
 	/*
 	 * Note: Due to modules and __init, code can
@@ -72,29 +69,20 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 	 *  as well as code changing.
 	 *
 	 * No real locking needed, this code is run through
-	 * kstop_machine.
+	 * kstop_machine, or before SMP starts.
 	 */
-	asm volatile (
-		"1: lock\n"
-		"   cmpxchg %3, (%2)\n"
-		"   jnz 2f\n"
-		"   movb %b4, 4(%2)\n"
-		"2:\n"
-		".section .fixup, \"ax\"\n"
-		"3:	movl $1, %0\n"
-		"	jmp 2b\n"
-		".previous\n"
-		_ASM_EXTABLE(1b, 3b)
-		: "=r"(faulted), "=a"(replaced)
-		: "r"(ip), "r"(new), "c"(newch),
-		  "0"(faulted), "a"(old)
-		: "memory");
-	sync_core();
+	if (__copy_from_user_inatomic(replaced, (char __user *)ip, MCOUNT_INSN_SIZE))
+		return 1;
+
+	if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
+		return 2;
 
-	if (replaced != old && replaced != new)
-		faulted = 2;
+	WARN_ON_ONCE(__copy_to_user_inatomic((char __user *)ip, new_code,
+				    MCOUNT_INSN_SIZE));
 
-	return faulted;
+	sync_core();
+
+	return 0;
 }
 
 notrace int ftrace_update_ftrace_func(ftrace_func_t func)
@@ -112,30 +100,76 @@ notrace int ftrace_update_ftrace_func(ftrace_func_t func)
 
 notrace int ftrace_mcount_set(unsigned long *data)
 {
-	unsigned long ip = (long)(&mcount_call);
-	unsigned long *addr = data;
-	unsigned char old[MCOUNT_INSN_SIZE], *new;
-
-	/*
-	 * Replace the mcount stub with a pointer to the
-	 * ip recorder function.
-	 */
-	memcpy(old, &mcount_call, MCOUNT_INSN_SIZE);
-	new = ftrace_call_replace(ip, *addr);
-	*addr = ftrace_modify_code(ip, old, new);
-
+	/* mcount is initialized as a nop */
+	*data = 0;
 	return 0;
 }
 
 int __init ftrace_dyn_arch_init(void *data)
 {
-	const unsigned char *const *noptable = find_nop_table();
-
-	/* This is running in kstop_machine */
-
-	ftrace_mcount_set(data);
+	extern const unsigned char ftrace_test_p6nop[];
+	extern const unsigned char ftrace_test_nop5[];
+	extern const unsigned char ftrace_test_jmp[];
+	int faulted = 0;
 
-	ftrace_nop = (unsigned long *)noptable[MCOUNT_INSN_SIZE];
+	/*
+	 * There is no good nop for all x86 archs.
+	 * We will default to using the P6_NOP5, but first we
+	 * will test to make sure that the nop will actually
+	 * work on this CPU. If it faults, we will then
+	 * go to a lesser efficient 5 byte nop. If that fails
+	 * we then just use a jmp as our nop. This isn't the most
+	 * efficient nop, but we can not use a multi part nop
+	 * since we would then risk being preempted in the middle
+	 * of that nop, and if we enabled tracing then, it might
+	 * cause a system crash.
+	 *
+	 * TODO: check the cpuid to determine the best nop.
+	 */
+	asm volatile (
+		"jmp ftrace_test_jmp\n"
+		/* This code needs to stay around */
+		".section .text, \"ax\"\n"
+		"ftrace_test_jmp:"
+		"jmp ftrace_test_p6nop\n"
+		"nop\n"
+		"nop\n"
+		"nop\n"  /* 2 byte jmp + 3 bytes */
+		"ftrace_test_p6nop:"
+		P6_NOP5
+		"jmp 1f\n"
+		"ftrace_test_nop5:"
+		".byte 0x66,0x66,0x66,0x66,0x90\n"
+		"jmp 1f\n"
+		".previous\n"
+		"1:"
+		".section .fixup, \"ax\"\n"
+		"2:	movl $1, %0\n"
+		"	jmp ftrace_test_nop5\n"
+		"3:	movl $2, %0\n"
+		"	jmp 1b\n"
+		".previous\n"
+		_ASM_EXTABLE(ftrace_test_p6nop, 2b)
+		_ASM_EXTABLE(ftrace_test_nop5, 3b)
+		: "=r"(faulted) : "0" (faulted));
+
+	switch (faulted) {
+	case 0:
+		pr_info("ftrace: converting mcount calls to 0f 1f 44 00 00\n");
+		ftrace_nop = (unsigned long *)ftrace_test_p6nop;
+		break;
+	case 1:
+		pr_info("ftrace: converting mcount calls to 66 66 66 66 90\n");
+		ftrace_nop = (unsigned long *)ftrace_test_nop5;
+		break;
+	case 2:
+		pr_info("ftrace: converting mcount calls to jmp . + 5\n");
+		ftrace_nop = (unsigned long *)ftrace_test_jmp;
+		break;
+	}
+
+	/* The return code is retured via data */
+	*(unsigned long *)data = 0;
 
 	return 0;
 }
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index eaff0bb..6c9bfc9 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -16,87 +16,63 @@
 #include <linux/ctype.h>
 #include <linux/init.h>
 #include <linux/hardirq.h>
+#include <linux/dmar.h>
 
 #include <asm/smp.h>
 #include <asm/ipi.h>
 #include <asm/genapic.h>
 
-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-#endif
-
-DEFINE_PER_CPU(int, x2apic_extra_bits);
+extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
+extern struct genapic apic_x2xpic_uv_x;
+extern struct genapic apic_x2apic_phys;
+extern struct genapic apic_x2apic_cluster;
 
 struct genapic __read_mostly *genapic = &apic_flat;
 
-static enum uv_system_type uv_system_type;
+static struct genapic *apic_probe[] __initdata = {
+	&apic_x2apic_uv_x,
+	&apic_x2apic_phys,
+	&apic_x2apic_cluster,
+	&apic_physflat,
+	NULL,
+};
 
 /*
  * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
  */
 void __init setup_apic_routing(void)
 {
-	if (uv_system_type == UV_NON_UNIQUE_APIC)
-		genapic = &apic_x2apic_uv_x;
-	else
-#ifdef CONFIG_ACPI
-	/*
-	 * Quirk: some x86_64 machines can only use physical APIC mode
-	 * regardless of how many processors are present (x86_64 ES7000
-	 * is an example).
-	 */
-	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
-			(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
-		genapic = &apic_physflat;
-	else
-#endif
-
-	if (max_physical_apicid < 8)
-		genapic = &apic_flat;
-	else
-		genapic = &apic_physflat;
+	if (genapic == &apic_x2apic_phys || genapic == &apic_x2apic_cluster) {
+		if (!intr_remapping_enabled)
+			genapic = &apic_flat;
+	}
 
-	printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
+	if (genapic == &apic_flat) {
+		if (max_physical_apicid >= 8)
+			genapic = &apic_physflat;
+		printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
+	}
 }
 
 /* Same for both flat and physical. */
 
-void send_IPI_self(int vector)
+void apic_send_IPI_self(int vector)
 {
 	__send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
 }
 
 int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	if (!strcmp(oem_id, "SGI")) {
-		if (!strcmp(oem_table_id, "UVL"))
-			uv_system_type = UV_LEGACY_APIC;
-		else if (!strcmp(oem_table_id, "UVX"))
-			uv_system_type = UV_X2APIC;
-		else if (!strcmp(oem_table_id, "UVH"))
-			uv_system_type = UV_NON_UNIQUE_APIC;
+	int i;
+
+	for (i = 0; apic_probe[i]; ++i) {
+		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
+			genapic = apic_probe[i];
+			printk(KERN_INFO "Setting APIC routing to %s.\n",
+				genapic->name);
+			return 1;
+		}
 	}
 	return 0;
 }
-
-unsigned int read_apic_id(void)
-{
-	unsigned int id;
-
-	WARN_ON(preemptible() && num_online_cpus() > 1);
-	id = apic_read(APIC_ID);
-	if (uv_system_type >= UV_X2APIC)
-		id  |= __get_cpu_var(x2apic_extra_bits);
-	return id;
-}
-
-enum uv_system_type get_uv_system_type(void)
-{
-	return uv_system_type;
-}
-
-int is_uv_system(void)
-{
-	return uv_system_type != UV_NONE;
-}
-EXPORT_SYMBOL_GPL(is_uv_system);
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 786548a..c026279 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -15,9 +15,20 @@
 #include <linux/kernel.h>
 #include <linux/ctype.h>
 #include <linux/init.h>
+#include <linux/hardirq.h>
 #include <asm/smp.h>
 #include <asm/ipi.h>
 #include <asm/genapic.h>
+#include <mach_apicdef.h>
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+#endif
+
+static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 1;
+}
 
 static cpumask_t flat_target_cpus(void)
 {
@@ -95,9 +106,33 @@ static void flat_send_IPI_all(int vector)
 		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
 }
 
+static unsigned int get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	id = (((x)>>24) & 0xFFu);
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	x = ((id & 0xFFu)<<24);
+	return x;
+}
+
+static unsigned int read_xapic_id(void)
+{
+	unsigned int id;
+
+	id = get_apic_id(apic_read(APIC_ID));
+	return id;
+}
+
 static int flat_apic_id_registered(void)
 {
-	return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
+	return physid_isset(read_xapic_id(), phys_cpu_present_map);
 }
 
 static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask)
@@ -112,6 +147,7 @@ static unsigned int phys_pkg_id(int index_msb)
 
 struct genapic apic_flat =  {
 	.name = "flat",
+	.acpi_madt_oem_check = flat_acpi_madt_oem_check,
 	.int_delivery_mode = dest_LowestPrio,
 	.int_dest_mode = (APIC_DEST_LOGICAL != 0),
 	.target_cpus = flat_target_cpus,
@@ -121,8 +157,12 @@ struct genapic apic_flat =  {
 	.send_IPI_all = flat_send_IPI_all,
 	.send_IPI_allbutself = flat_send_IPI_allbutself,
 	.send_IPI_mask = flat_send_IPI_mask,
+	.send_IPI_self = apic_send_IPI_self,
 	.cpu_mask_to_apicid = flat_cpu_mask_to_apicid,
 	.phys_pkg_id = phys_pkg_id,
+	.get_apic_id = get_apic_id,
+	.set_apic_id = set_apic_id,
+	.apic_id_mask = (0xFFu<<24),
 };
 
 /*
@@ -130,6 +170,23 @@ struct genapic apic_flat =  {
  * We cannot use logical delivery in this case because the mask
  * overflows, so use physical mode.
  */
+static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+#ifdef CONFIG_ACPI
+	/*
+	 * Quirk: some x86_64 machines can only use physical APIC mode
+	 * regardless of how many processors are present (x86_64 ES7000
+	 * is an example).
+	 */
+	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
+		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
+		printk(KERN_DEBUG "system APIC only can use physical flat");
+		return 1;
+	}
+#endif
+
+	return 0;
+}
 
 static cpumask_t physflat_target_cpus(void)
 {
@@ -176,6 +233,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
 
 struct genapic apic_physflat =  {
 	.name = "physical flat",
+	.acpi_madt_oem_check = physflat_acpi_madt_oem_check,
 	.int_delivery_mode = dest_Fixed,
 	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
 	.target_cpus = physflat_target_cpus,
@@ -185,6 +243,10 @@ struct genapic apic_physflat =  {
 	.send_IPI_all = physflat_send_IPI_all,
 	.send_IPI_allbutself = physflat_send_IPI_allbutself,
 	.send_IPI_mask = physflat_send_IPI_mask,
+	.send_IPI_self = apic_send_IPI_self,
 	.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
 	.phys_pkg_id = phys_pkg_id,
+	.get_apic_id = get_apic_id,
+	.set_apic_id = set_apic_id,
+	.apic_id_mask = (0xFFu<<24),
 };
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
new file mode 100644
index 0000000..f6a2c8e
--- /dev/null
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -0,0 +1,159 @@
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/dmar.h>
+
+#include <asm/smp.h>
+#include <asm/ipi.h>
+#include <asm/genapic.h>
+
+DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
+
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (cpu_has_x2apic)
+		return 1;
+
+	return 0;
+}
+
+/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
+
+static cpumask_t x2apic_target_cpus(void)
+{
+	return cpumask_of_cpu(0);
+}
+
+/*
+ * for now each logical cpu is in its own vector allocation domain.
+ */
+static cpumask_t x2apic_vector_allocation_domain(int cpu)
+{
+	cpumask_t domain = CPU_MASK_NONE;
+	cpu_set(cpu, domain);
+	return domain;
+}
+
+static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
+				   unsigned int dest)
+{
+	unsigned long cfg;
+
+	cfg = __prepare_ICR(0, vector, dest);
+
+	/*
+	 * send the IPI.
+	 */
+	x2apic_icr_write(cfg, apicid);
+}
+
+/*
+ * for now, we send the IPI's one by one in the cpumask.
+ * TBD: Based on the cpu mask, we can send the IPI's to the cluster group
+ * at once. We have 16 cpu's in a cluster. This will minimize IPI register
+ * writes.
+ */
+static void x2apic_send_IPI_mask(cpumask_t mask, int vector)
+{
+	unsigned long flags;
+	unsigned long query_cpu;
+
+	local_irq_save(flags);
+	for_each_cpu_mask(query_cpu, mask) {
+		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_logical_apicid, query_cpu),
+				       vector, APIC_DEST_LOGICAL);
+	}
+	local_irq_restore(flags);
+}
+
+static void x2apic_send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		x2apic_send_IPI_mask(mask, vector);
+}
+
+static void x2apic_send_IPI_all(int vector)
+{
+	x2apic_send_IPI_mask(cpu_online_map, vector);
+}
+
+static int x2apic_apic_id_registered(void)
+{
+	return 1;
+}
+
+static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = first_cpu(cpumask);
+	if ((unsigned)cpu < NR_CPUS)
+		return per_cpu(x86_cpu_to_logical_apicid, cpu);
+	else
+		return BAD_APICID;
+}
+
+static unsigned int get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	id = x;
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	x = id;
+	return x;
+}
+
+static unsigned int phys_pkg_id(int index_msb)
+{
+	return current_cpu_data.initial_apicid >> index_msb;
+}
+
+static void x2apic_send_IPI_self(int vector)
+{
+	apic_write(APIC_SELF_IPI, vector);
+}
+
+static void init_x2apic_ldr(void)
+{
+	int cpu = smp_processor_id();
+
+	per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
+	return;
+}
+
+struct genapic apic_x2apic_cluster = {
+	.name = "cluster x2apic",
+	.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
+	.int_delivery_mode = dest_LowestPrio,
+	.int_dest_mode = (APIC_DEST_LOGICAL != 0),
+	.target_cpus = x2apic_target_cpus,
+	.vector_allocation_domain = x2apic_vector_allocation_domain,
+	.apic_id_registered = x2apic_apic_id_registered,
+	.init_apic_ldr = init_x2apic_ldr,
+	.send_IPI_all = x2apic_send_IPI_all,
+	.send_IPI_allbutself = x2apic_send_IPI_allbutself,
+	.send_IPI_mask = x2apic_send_IPI_mask,
+	.send_IPI_self = x2apic_send_IPI_self,
+	.cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
+	.phys_pkg_id = phys_pkg_id,
+	.get_apic_id = get_apic_id,
+	.set_apic_id = set_apic_id,
+	.apic_id_mask = (0xFFFFFFFFu),
+};
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
new file mode 100644
index 0000000..d042211
--- /dev/null
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -0,0 +1,154 @@
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/dmar.h>
+
+#include <asm/smp.h>
+#include <asm/ipi.h>
+#include <asm/genapic.h>
+
+static int x2apic_phys;
+
+static int set_x2apic_phys_mode(char *arg)
+{
+	x2apic_phys = 1;
+	return 0;
+}
+early_param("x2apic_phys", set_x2apic_phys_mode);
+
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (cpu_has_x2apic && x2apic_phys)
+		return 1;
+
+	return 0;
+}
+
+/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
+
+static cpumask_t x2apic_target_cpus(void)
+{
+	return cpumask_of_cpu(0);
+}
+
+static cpumask_t x2apic_vector_allocation_domain(int cpu)
+{
+	cpumask_t domain = CPU_MASK_NONE;
+	cpu_set(cpu, domain);
+	return domain;
+}
+
+static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
+				   unsigned int dest)
+{
+	unsigned long cfg;
+
+	cfg = __prepare_ICR(0, vector, dest);
+
+	/*
+	 * send the IPI.
+	 */
+	x2apic_icr_write(cfg, apicid);
+}
+
+static void x2apic_send_IPI_mask(cpumask_t mask, int vector)
+{
+	unsigned long flags;
+	unsigned long query_cpu;
+
+	local_irq_save(flags);
+	for_each_cpu_mask(query_cpu, mask) {
+		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
+				       vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+static void x2apic_send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		x2apic_send_IPI_mask(mask, vector);
+}
+
+static void x2apic_send_IPI_all(int vector)
+{
+	x2apic_send_IPI_mask(cpu_online_map, vector);
+}
+
+static int x2apic_apic_id_registered(void)
+{
+	return 1;
+}
+
+static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = first_cpu(cpumask);
+	if ((unsigned)cpu < NR_CPUS)
+		return per_cpu(x86_cpu_to_apicid, cpu);
+	else
+		return BAD_APICID;
+}
+
+static unsigned int get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	id = x;
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	x = id;
+	return x;
+}
+
+static unsigned int phys_pkg_id(int index_msb)
+{
+	return current_cpu_data.initial_apicid >> index_msb;
+}
+
+void x2apic_send_IPI_self(int vector)
+{
+	apic_write(APIC_SELF_IPI, vector);
+}
+
+void init_x2apic_ldr(void)
+{
+	return;
+}
+
+struct genapic apic_x2apic_phys = {
+	.name = "physical x2apic",
+	.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
+	.int_delivery_mode = dest_Fixed,
+	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
+	.target_cpus = x2apic_target_cpus,
+	.vector_allocation_domain = x2apic_vector_allocation_domain,
+	.apic_id_registered = x2apic_apic_id_registered,
+	.init_apic_ldr = init_x2apic_ldr,
+	.send_IPI_all = x2apic_send_IPI_all,
+	.send_IPI_allbutself = x2apic_send_IPI_allbutself,
+	.send_IPI_mask = x2apic_send_IPI_mask,
+	.send_IPI_self = x2apic_send_IPI_self,
+	.cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
+	.phys_pkg_id = phys_pkg_id,
+	.get_apic_id = get_apic_id,
+	.set_apic_id = set_apic_id,
+	.apic_id_mask = (0xFFFFFFFFu),
+};
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index bfa837c..680a065 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -12,12 +12,12 @@
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/string.h>
-#include <linux/kernel.h>
 #include <linux/ctype.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/bootmem.h>
 #include <linux/module.h>
+#include <linux/hardirq.h>
 #include <asm/smp.h>
 #include <asm/ipi.h>
 #include <asm/genapic.h>
@@ -26,6 +26,36 @@
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/bios.h>
 
+DEFINE_PER_CPU(int, x2apic_extra_bits);
+
+static enum uv_system_type uv_system_type;
+
+static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strcmp(oem_id, "SGI")) {
+		if (!strcmp(oem_table_id, "UVL"))
+			uv_system_type = UV_LEGACY_APIC;
+		else if (!strcmp(oem_table_id, "UVX"))
+			uv_system_type = UV_X2APIC;
+		else if (!strcmp(oem_table_id, "UVH")) {
+			uv_system_type = UV_NON_UNIQUE_APIC;
+			return 1;
+		}
+	}
+	return 0;
+}
+
+enum uv_system_type get_uv_system_type(void)
+{
+	return uv_system_type;
+}
+
+int is_uv_system(void)
+{
+	return uv_system_type != UV_NONE;
+}
+EXPORT_SYMBOL_GPL(is_uv_system);
+
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
 
@@ -84,7 +114,7 @@ static void uv_send_IPI_one(int cpu, int vector)
 	unsigned long val, apicid, lapicid;
 	int pnode;
 
-	apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */
+	apicid = per_cpu(x86_cpu_to_apicid, cpu);
 	lapicid = apicid & 0x3f;		/* ZZZ macro needed */
 	pnode = uv_apicid_to_pnode(apicid);
 	val =
@@ -123,6 +153,10 @@ static int uv_apic_id_registered(void)
 	return 1;
 }
 
+static void uv_init_apic_ldr(void)
+{
+}
+
 static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
 {
 	int cpu;
@@ -138,31 +172,59 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
 		return BAD_APICID;
 }
 
+static unsigned int get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	WARN_ON(preemptible() && num_online_cpus() > 1);
+	id = x | __get_cpu_var(x2apic_extra_bits);
+
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	/* maskout x2apic_extra_bits ? */
+	x = id;
+	return x;
+}
+
+static unsigned int uv_read_apic_id(void)
+{
+
+	return get_apic_id(apic_read(APIC_ID));
+}
+
 static unsigned int phys_pkg_id(int index_msb)
 {
-	return GET_APIC_ID(read_apic_id()) >> index_msb;
+	return uv_read_apic_id() >> index_msb;
 }
 
-#ifdef ZZZ		/* Needs x2apic patch */
 static void uv_send_IPI_self(int vector)
 {
 	apic_write(APIC_SELF_IPI, vector);
 }
-#endif
 
 struct genapic apic_x2apic_uv_x = {
 	.name = "UV large system",
+	.acpi_madt_oem_check = uv_acpi_madt_oem_check,
 	.int_delivery_mode = dest_Fixed,
 	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
 	.target_cpus = uv_target_cpus,
-	.vector_allocation_domain = uv_vector_allocation_domain,/* Fixme ZZZ */
+	.vector_allocation_domain = uv_vector_allocation_domain,
 	.apic_id_registered = uv_apic_id_registered,
+	.init_apic_ldr = uv_init_apic_ldr,
 	.send_IPI_all = uv_send_IPI_all,
 	.send_IPI_allbutself = uv_send_IPI_allbutself,
 	.send_IPI_mask = uv_send_IPI_mask,
-	/* ZZZ.send_IPI_self = uv_send_IPI_self, */
+	.send_IPI_self = uv_send_IPI_self,
 	.cpu_mask_to_apicid = uv_cpu_mask_to_apicid,
-	.phys_pkg_id = phys_pkg_id,	/* Fixme ZZZ */
+	.phys_pkg_id = phys_pkg_id,
+	.get_apic_id = get_apic_id,
+	.set_apic_id = set_apic_id,
+	.apic_id_mask = (0xFFFFFFFFu),
 };
 
 static __cpuinit void set_x2apic_extra_bits(int pnode)
@@ -222,12 +284,13 @@ static __init void map_low_mmrs(void)
 
 enum map_type {map_wb, map_uc};
 
-static __init void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int shift,
+			    int max_pnode, enum map_type map_type)
 {
 	unsigned long bytes, paddr;
 
 	paddr = base << shift;
-	bytes = (1UL << shift);
+	bytes = (1UL << shift) * (max_pnode + 1);
 	printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
 	       					paddr + bytes);
 	if (map_type == map_uc)
@@ -243,7 +306,7 @@ static __init void map_gru_high(int max_pnode)
 
 	gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
 	if (gru.s.enable)
-		map_high("GRU", gru.s.base, shift, map_wb);
+		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
 }
 
 static __init void map_config_high(int max_pnode)
@@ -253,7 +316,7 @@ static __init void map_config_high(int max_pnode)
 
 	cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR);
 	if (cfg.s.enable)
-		map_high("CONFIG", cfg.s.base, shift, map_uc);
+		map_high("CONFIG", cfg.s.base, shift, max_pnode, map_uc);
 }
 
 static __init void map_mmr_high(int max_pnode)
@@ -263,7 +326,7 @@ static __init void map_mmr_high(int max_pnode)
 
 	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
 	if (mmr.s.enable)
-		map_high("MMR", mmr.s.base, shift, map_uc);
+		map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
 }
 
 static __init void map_mmioh_high(int max_pnode)
@@ -273,17 +336,17 @@ static __init void map_mmioh_high(int max_pnode)
 
 	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
 	if (mmioh.s.enable)
-		map_high("MMIOH", mmioh.s.base, shift, map_uc);
+		map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
 }
 
 static __init void uv_rtc_init(void)
 {
-	long status, ticks_per_sec, drift;
+	long status;
+	u64 ticks_per_sec;
 
-	status =
-	    x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
-					&drift);
-	if (status != 0 || ticks_per_sec < 100000) {
+	status = uv_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK,
+					&ticks_per_sec);
+	if (status != BIOS_STATUS_SUCCESS || ticks_per_sec < 100000) {
 		printk(KERN_WARNING
 			"unable to determine platform RTC clock frequency, "
 			"guessing.\n");
@@ -293,7 +356,22 @@ static __init void uv_rtc_init(void)
 		sn_rtc_cycles_per_second = ticks_per_sec;
 }
 
-static bool uv_system_inited;
+/*
+ * Called on each cpu to initialize the per_cpu UV data area.
+ * 	ZZZ hotplug not supported yet
+ */
+void __cpuinit uv_cpu_init(void)
+{
+	/* CPU 0 initilization will be done via uv_system_init. */
+	if (!uv_blade_info)
+		return;
+
+	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
+
+	if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
+		set_x2apic_extra_bits(uv_hub_info->pnode);
+}
+
 
 void __init uv_system_init(void)
 {
@@ -349,6 +427,9 @@ void __init uv_system_init(void)
 	gnode_upper = (((unsigned long)node_id.s.node_id) &
 		       ~((1 << n_val) - 1)) << m_val;
 
+	uv_bios_init();
+	uv_bios_get_sn_info(0, &uv_type, &sn_partition_id,
+			    &uv_coherency_id, &uv_region_size);
 	uv_rtc_init();
 
 	for_each_present_cpu(cpu) {
@@ -370,7 +451,7 @@ void __init uv_system_init(void)
 		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
 		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
 		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
-		uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */
+		uv_cpu_hub_info(cpu)->coherency_domain_number = uv_coherency_id;
 		uv_node_to_blade[nid] = blade;
 		uv_cpu_to_blade[cpu] = blade;
 		max_pnode = max(pnode, max_pnode);
@@ -385,19 +466,6 @@ void __init uv_system_init(void)
 	map_mmr_high(max_pnode);
 	map_config_high(max_pnode);
 	map_mmioh_high(max_pnode);
-	uv_system_inited = true;
-}
-
-/*
- * Called on each cpu to initialize the per_cpu UV data area.
- * 	ZZZ hotplug not supported yet
- */
-void __cpuinit uv_cpu_init(void)
-{
-	BUG_ON(!uv_system_inited);
 
-	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
-
-	if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
-		set_x2apic_extra_bits(uv_hub_info->pnode);
+	uv_cpu_init();
 }
diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c
index 3e66bd3..1dcb0f1 100644
--- a/arch/x86/kernel/head.c
+++ b/arch/x86/kernel/head.c
@@ -35,6 +35,7 @@ void __init reserve_ebda_region(void)
 
 	/* start of EBDA area */
 	ebda_addr = get_bios_ebda();
+	printk(KERN_INFO "BIOS EBDA/lowmem at: %08x/%08x\n", ebda_addr, lowmem);
 
 	/* Fixup: bios puts an EBDA in the top 64K segment */
 	/* of conventional memory, but does not adjust lowmem. */
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 9bfc4d7..d16084f 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -108,12 +108,11 @@ void __init x86_64_start_kernel(char * real_mode_data)
 	}
 	load_idt((const struct desc_ptr *)&idt_descr);
 
-	early_printk("Kernel alive\n");
+	if (console_loglevel == 10)
+		early_printk("Kernel alive\n");
 
 	x86_64_init_pda();
 
-	early_printk("Kernel really alive\n");
-
 	x86_64_start_reservations(real_mode_data);
 }
 
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index a7010c3..e835b4e 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -172,10 +172,6 @@ num_subarch_entries = (. - subarch_entries) / 4
  *
  * Note that the stack is not yet set up!
  */
-#define PTE_ATTR	0x007		/* PRESENT+RW+USER */
-#define PDE_ATTR	0x067		/* PRESENT+RW+USER+DIRTY+ACCESSED */
-#define PGD_ATTR	0x001		/* PRESENT (no other attributes) */
-
 default_entry:
 #ifdef CONFIG_X86_PAE
 
@@ -196,9 +192,9 @@ default_entry:
 	movl $pa(pg0), %edi
 	movl %edi, pa(init_pg_tables_start)
 	movl $pa(swapper_pg_pmd), %edx
-	movl $PTE_ATTR, %eax
+	movl $PTE_IDENT_ATTR, %eax
 10:
-	leal PDE_ATTR(%edi),%ecx		/* Create PMD entry */
+	leal PDE_IDENT_ATTR(%edi),%ecx		/* Create PMD entry */
 	movl %ecx,(%edx)			/* Store PMD entry */
 						/* Upper half already zero */
 	addl $8,%edx
@@ -215,7 +211,7 @@ default_entry:
 	 * End condition: we must map up to and including INIT_MAP_BEYOND_END
 	 * bytes beyond the end of our own page tables.
 	 */
-	leal (INIT_MAP_BEYOND_END+PTE_ATTR)(%edi),%ebp
+	leal (INIT_MAP_BEYOND_END+PTE_IDENT_ATTR)(%edi),%ebp
 	cmpl %ebp,%eax
 	jb 10b
 1:
@@ -224,7 +220,7 @@ default_entry:
 	movl %eax, pa(max_pfn_mapped)
 
 	/* Do early initialization of the fixmap area */
-	movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax
+	movl $pa(swapper_pg_fixmap)+PDE_IDENT_ATTR,%eax
 	movl %eax,pa(swapper_pg_pmd+0x1000*KPMDS-8)
 #else	/* Not PAE */
 
@@ -233,9 +229,9 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
 	movl $pa(pg0), %edi
 	movl %edi, pa(init_pg_tables_start)
 	movl $pa(swapper_pg_dir), %edx
-	movl $PTE_ATTR, %eax
+	movl $PTE_IDENT_ATTR, %eax
 10:
-	leal PDE_ATTR(%edi),%ecx		/* Create PDE entry */
+	leal PDE_IDENT_ATTR(%edi),%ecx		/* Create PDE entry */
 	movl %ecx,(%edx)			/* Store identity PDE entry */
 	movl %ecx,page_pde_offset(%edx)		/* Store kernel PDE entry */
 	addl $4,%edx
@@ -249,7 +245,7 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
 	 * bytes beyond the end of our own page tables; the +0x007 is
 	 * the attribute bits
 	 */
-	leal (INIT_MAP_BEYOND_END+PTE_ATTR)(%edi),%ebp
+	leal (INIT_MAP_BEYOND_END+PTE_IDENT_ATTR)(%edi),%ebp
 	cmpl %ebp,%eax
 	jb 10b
 	movl %edi,pa(init_pg_tables_end)
@@ -257,7 +253,7 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
 	movl %eax, pa(max_pfn_mapped)
 
 	/* Do early initialization of the fixmap area */
-	movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax
+	movl $pa(swapper_pg_fixmap)+PDE_IDENT_ATTR,%eax
 	movl %eax,pa(swapper_pg_dir+0xffc)
 #endif
 	jmp 3f
@@ -634,19 +630,19 @@ ENTRY(empty_zero_page)
 	/* Page-aligned for the benefit of paravirt? */
 	.align PAGE_SIZE_asm
 ENTRY(swapper_pg_dir)
-	.long	pa(swapper_pg_pmd+PGD_ATTR),0		/* low identity map */
+	.long	pa(swapper_pg_pmd+PGD_IDENT_ATTR),0	/* low identity map */
 # if KPMDS == 3
-	.long	pa(swapper_pg_pmd+PGD_ATTR),0
-	.long	pa(swapper_pg_pmd+PGD_ATTR+0x1000),0
-	.long	pa(swapper_pg_pmd+PGD_ATTR+0x2000),0
+	.long	pa(swapper_pg_pmd+PGD_IDENT_ATTR),0
+	.long	pa(swapper_pg_pmd+PGD_IDENT_ATTR+0x1000),0
+	.long	pa(swapper_pg_pmd+PGD_IDENT_ATTR+0x2000),0
 # elif KPMDS == 2
 	.long	0,0
-	.long	pa(swapper_pg_pmd+PGD_ATTR),0
-	.long	pa(swapper_pg_pmd+PGD_ATTR+0x1000),0
+	.long	pa(swapper_pg_pmd+PGD_IDENT_ATTR),0
+	.long	pa(swapper_pg_pmd+PGD_IDENT_ATTR+0x1000),0
 # elif KPMDS == 1
 	.long	0,0
 	.long	0,0
-	.long	pa(swapper_pg_pmd+PGD_ATTR),0
+	.long	pa(swapper_pg_pmd+PGD_IDENT_ATTR),0
 # else
 #  error "Kernel PMDs should be 1, 2 or 3"
 # endif
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index db3280a..26cfdc1 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -110,7 +110,7 @@ startup_64:
 	movq	%rdi, %rax
 	shrq	$PMD_SHIFT, %rax
 	andq	$(PTRS_PER_PMD - 1), %rax
-	leaq	__PAGE_KERNEL_LARGE_EXEC(%rdi), %rdx
+	leaq	__PAGE_KERNEL_IDENT_LARGE_EXEC(%rdi), %rdx
 	leaq	level2_spare_pgt(%rip), %rbx
 	movq	%rdx, 0(%rbx, %rax, 8)
 ident_complete:
@@ -374,7 +374,7 @@ NEXT_PAGE(level2_ident_pgt)
 	/* Since I easily can, map the first 1G.
 	 * Don't set NX because code runs from these pages.
 	 */
-	PMDS(0, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
+	PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD)
 
 NEXT_PAGE(level2_kernel_pgt)
 	/*
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 73deaff..77017e8 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -1,29 +1,49 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/hpet.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/cpu.h>
 #include <linux/pm.h>
+#include <linux/io.h>
 
 #include <asm/fixmap.h>
-#include <asm/hpet.h>
 #include <asm/i8253.h>
-#include <asm/io.h>
+#include <asm/hpet.h>
 
-#define HPET_MASK	CLOCKSOURCE_MASK(32)
-#define HPET_SHIFT	22
+#define HPET_MASK			CLOCKSOURCE_MASK(32)
+#define HPET_SHIFT			22
 
 /* FSEC = 10^-15
    NSEC = 10^-9 */
-#define FSEC_PER_NSEC	1000000L
+#define FSEC_PER_NSEC			1000000L
+
+#define HPET_DEV_USED_BIT		2
+#define HPET_DEV_USED			(1 << HPET_DEV_USED_BIT)
+#define HPET_DEV_VALID			0x8
+#define HPET_DEV_FSB_CAP		0x1000
+#define HPET_DEV_PERI_CAP		0x2000
+
+#define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
 
 /*
  * HPET address is set in acpi/boot.c, when an ACPI entry exists
  */
-unsigned long hpet_address;
-static void __iomem *hpet_virt_address;
+unsigned long				hpet_address;
+unsigned long				hpet_num_timers;
+static void __iomem			*hpet_virt_address;
+
+struct hpet_dev {
+	struct clock_event_device	evt;
+	unsigned int			num;
+	int				cpu;
+	unsigned int			irq;
+	unsigned int			flags;
+	char				name[10];
+};
 
 unsigned long hpet_readl(unsigned long a)
 {
@@ -59,7 +79,7 @@ static inline void hpet_clear_mapping(void)
 static int boot_hpet_disable;
 int hpet_force_user;
 
-static int __init hpet_setup(char* str)
+static int __init hpet_setup(char *str)
 {
 	if (str) {
 		if (!strncmp("disable", str, 7))
@@ -80,7 +100,7 @@ __setup("nohpet", disable_hpet);
 
 static inline int is_hpet_capable(void)
 {
-	return (!boot_hpet_disable && hpet_address);
+	return !boot_hpet_disable && hpet_address;
 }
 
 /*
@@ -102,6 +122,9 @@ EXPORT_SYMBOL_GPL(is_hpet_enabled);
  * timer 0 and timer 1 in case of RTC emulation.
  */
 #ifdef CONFIG_HPET
+
+static void hpet_reserve_msi_timers(struct hpet_data *hd);
+
 static void hpet_reserve_platform_timers(unsigned long id)
 {
 	struct hpet __iomem *hpet = hpet_virt_address;
@@ -111,25 +134,31 @@ static void hpet_reserve_platform_timers(unsigned long id)
 
 	nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
 
-	memset(&hd, 0, sizeof (hd));
-	hd.hd_phys_address = hpet_address;
-	hd.hd_address = hpet;
-	hd.hd_nirqs = nrtimers;
-	hd.hd_flags = HPET_DATA_PLATFORM;
+	memset(&hd, 0, sizeof(hd));
+	hd.hd_phys_address	= hpet_address;
+	hd.hd_address		= hpet;
+	hd.hd_nirqs		= nrtimers;
 	hpet_reserve_timer(&hd, 0);
 
 #ifdef CONFIG_HPET_EMULATE_RTC
 	hpet_reserve_timer(&hd, 1);
 #endif
 
+	/*
+	 * NOTE that hd_irq[] reflects IOAPIC input pins (LEGACY_8254
+	 * is wrong for i8259!) not the output IRQ.  Many BIOS writers
+	 * don't bother configuring *any* comparator interrupts.
+	 */
 	hd.hd_irq[0] = HPET_LEGACY_8254;
 	hd.hd_irq[1] = HPET_LEGACY_RTC;
 
 	for (i = 2; i < nrtimers; timer++, i++) {
-		hd.hd_irq[i] = (readl(&timer->hpet_config) & Tn_INT_ROUTE_CNF_MASK) >>
-			Tn_INT_ROUTE_CNF_SHIFT;
+		hd.hd_irq[i] = (readl(&timer->hpet_config) &
+			Tn_INT_ROUTE_CNF_MASK) >> Tn_INT_ROUTE_CNF_SHIFT;
 	}
 
+	hpet_reserve_msi_timers(&hd);
+
 	hpet_alloc(&hd);
 
 }
@@ -223,60 +252,70 @@ static void hpet_legacy_clockevent_register(void)
 	printk(KERN_DEBUG "hpet clockevent registered\n");
 }
 
-static void hpet_legacy_set_mode(enum clock_event_mode mode,
-			  struct clock_event_device *evt)
+static int hpet_setup_msi_irq(unsigned int irq);
+
+static void hpet_set_mode(enum clock_event_mode mode,
+			  struct clock_event_device *evt, int timer)
 {
 	unsigned long cfg, cmp, now;
 	uint64_t delta;
 
-	switch(mode) {
+	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * hpet_clockevent.mult;
-		delta >>= hpet_clockevent.shift;
+		delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
+		delta >>= evt->shift;
 		now = hpet_readl(HPET_COUNTER);
 		cmp = now + (unsigned long) delta;
-		cfg = hpet_readl(HPET_T0_CFG);
+		cfg = hpet_readl(HPET_Tn_CFG(timer));
 		cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
 		       HPET_TN_SETVAL | HPET_TN_32BIT;
-		hpet_writel(cfg, HPET_T0_CFG);
+		hpet_writel(cfg, HPET_Tn_CFG(timer));
 		/*
 		 * The first write after writing TN_SETVAL to the
 		 * config register sets the counter value, the second
 		 * write sets the period.
 		 */
-		hpet_writel(cmp, HPET_T0_CMP);
+		hpet_writel(cmp, HPET_Tn_CMP(timer));
 		udelay(1);
-		hpet_writel((unsigned long) delta, HPET_T0_CMP);
+		hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
 		break;
 
 	case CLOCK_EVT_MODE_ONESHOT:
-		cfg = hpet_readl(HPET_T0_CFG);
+		cfg = hpet_readl(HPET_Tn_CFG(timer));
 		cfg &= ~HPET_TN_PERIODIC;
 		cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
-		hpet_writel(cfg, HPET_T0_CFG);
+		hpet_writel(cfg, HPET_Tn_CFG(timer));
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		cfg = hpet_readl(HPET_T0_CFG);
+		cfg = hpet_readl(HPET_Tn_CFG(timer));
 		cfg &= ~HPET_TN_ENABLE;
-		hpet_writel(cfg, HPET_T0_CFG);
+		hpet_writel(cfg, HPET_Tn_CFG(timer));
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
-		hpet_enable_legacy_int();
+		if (timer == 0) {
+			hpet_enable_legacy_int();
+		} else {
+			struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
+			hpet_setup_msi_irq(hdev->irq);
+			disable_irq(hdev->irq);
+			irq_set_affinity(hdev->irq, cpumask_of_cpu(hdev->cpu));
+			enable_irq(hdev->irq);
+		}
 		break;
 	}
 }
 
-static int hpet_legacy_next_event(unsigned long delta,
-				  struct clock_event_device *evt)
+static int hpet_next_event(unsigned long delta,
+			   struct clock_event_device *evt, int timer)
 {
 	u32 cnt;
 
 	cnt = hpet_readl(HPET_COUNTER);
 	cnt += (u32) delta;
-	hpet_writel(cnt, HPET_T0_CMP);
+	hpet_writel(cnt, HPET_Tn_CMP(timer));
 
 	/*
 	 * We need to read back the CMP register to make sure that
@@ -288,6 +327,347 @@ static int hpet_legacy_next_event(unsigned long delta,
 	return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 }
 
+static void hpet_legacy_set_mode(enum clock_event_mode mode,
+			struct clock_event_device *evt)
+{
+	hpet_set_mode(mode, evt, 0);
+}
+
+static int hpet_legacy_next_event(unsigned long delta,
+			struct clock_event_device *evt)
+{
+	return hpet_next_event(delta, evt, 0);
+}
+
+/*
+ * HPET MSI Support
+ */
+#ifdef CONFIG_PCI_MSI
+
+static DEFINE_PER_CPU(struct hpet_dev *, cpu_hpet_dev);
+static struct hpet_dev	*hpet_devs;
+
+void hpet_msi_unmask(unsigned int irq)
+{
+	struct hpet_dev *hdev = get_irq_data(irq);
+	unsigned long cfg;
+
+	/* unmask it */
+	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
+	cfg |= HPET_TN_FSB;
+	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
+}
+
+void hpet_msi_mask(unsigned int irq)
+{
+	unsigned long cfg;
+	struct hpet_dev *hdev = get_irq_data(irq);
+
+	/* mask it */
+	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
+	cfg &= ~HPET_TN_FSB;
+	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
+}
+
+void hpet_msi_write(unsigned int irq, struct msi_msg *msg)
+{
+	struct hpet_dev *hdev = get_irq_data(irq);
+
+	hpet_writel(msg->data, HPET_Tn_ROUTE(hdev->num));
+	hpet_writel(msg->address_lo, HPET_Tn_ROUTE(hdev->num) + 4);
+}
+
+void hpet_msi_read(unsigned int irq, struct msi_msg *msg)
+{
+	struct hpet_dev *hdev = get_irq_data(irq);
+
+	msg->data = hpet_readl(HPET_Tn_ROUTE(hdev->num));
+	msg->address_lo = hpet_readl(HPET_Tn_ROUTE(hdev->num) + 4);
+	msg->address_hi = 0;
+}
+
+static void hpet_msi_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
+	hpet_set_mode(mode, evt, hdev->num);
+}
+
+static int hpet_msi_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
+	return hpet_next_event(delta, evt, hdev->num);
+}
+
+static int hpet_setup_msi_irq(unsigned int irq)
+{
+	if (arch_setup_hpet_msi(irq)) {
+		destroy_irq(irq);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int hpet_assign_irq(struct hpet_dev *dev)
+{
+	unsigned int irq;
+
+	irq = create_irq();
+	if (!irq)
+		return -EINVAL;
+
+	set_irq_data(irq, dev);
+
+	if (hpet_setup_msi_irq(irq))
+		return -EINVAL;
+
+	dev->irq = irq;
+	return 0;
+}
+
+static irqreturn_t hpet_interrupt_handler(int irq, void *data)
+{
+	struct hpet_dev *dev = (struct hpet_dev *)data;
+	struct clock_event_device *hevt = &dev->evt;
+
+	if (!hevt->event_handler) {
+		printk(KERN_INFO "Spurious HPET timer interrupt on HPET timer %d\n",
+				dev->num);
+		return IRQ_HANDLED;
+	}
+
+	hevt->event_handler(hevt);
+	return IRQ_HANDLED;
+}
+
+static int hpet_setup_irq(struct hpet_dev *dev)
+{
+
+	if (request_irq(dev->irq, hpet_interrupt_handler,
+			IRQF_SHARED|IRQF_NOBALANCING, dev->name, dev))
+		return -1;
+
+	disable_irq(dev->irq);
+	irq_set_affinity(dev->irq, cpumask_of_cpu(dev->cpu));
+	enable_irq(dev->irq);
+
+	printk(KERN_DEBUG "hpet: %s irq %d for MSI\n",
+			 dev->name, dev->irq);
+
+	return 0;
+}
+
+/* This should be called in specific @cpu */
+static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu)
+{
+	struct clock_event_device *evt = &hdev->evt;
+	uint64_t hpet_freq;
+
+	WARN_ON(cpu != smp_processor_id());
+	if (!(hdev->flags & HPET_DEV_VALID))
+		return;
+
+	if (hpet_setup_msi_irq(hdev->irq))
+		return;
+
+	hdev->cpu = cpu;
+	per_cpu(cpu_hpet_dev, cpu) = hdev;
+	evt->name = hdev->name;
+	hpet_setup_irq(hdev);
+	evt->irq = hdev->irq;
+
+	evt->rating = 110;
+	evt->features = CLOCK_EVT_FEAT_ONESHOT;
+	if (hdev->flags & HPET_DEV_PERI_CAP)
+		evt->features |= CLOCK_EVT_FEAT_PERIODIC;
+
+	evt->set_mode = hpet_msi_set_mode;
+	evt->set_next_event = hpet_msi_next_event;
+	evt->shift = 32;
+
+	/*
+	 * The period is a femto seconds value. We need to calculate the
+	 * scaled math multiplication factor for nanosecond to hpet tick
+	 * conversion.
+	 */
+	hpet_freq = 1000000000000000ULL;
+	do_div(hpet_freq, hpet_period);
+	evt->mult = div_sc((unsigned long) hpet_freq,
+				      NSEC_PER_SEC, evt->shift);
+	/* Calculate the max delta */
+	evt->max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, evt);
+	/* 5 usec minimum reprogramming delta. */
+	evt->min_delta_ns = 5000;
+
+	evt->cpumask = cpumask_of_cpu(hdev->cpu);
+	clockevents_register_device(evt);
+}
+
+#ifdef CONFIG_HPET
+/* Reserve at least one timer for userspace (/dev/hpet) */
+#define RESERVE_TIMERS 1
+#else
+#define RESERVE_TIMERS 0
+#endif
+
+static void hpet_msi_capability_lookup(unsigned int start_timer)
+{
+	unsigned int id;
+	unsigned int num_timers;
+	unsigned int num_timers_used = 0;
+	int i;
+
+	id = hpet_readl(HPET_ID);
+
+	num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
+	num_timers++; /* Value read out starts from 0 */
+
+	hpet_devs = kzalloc(sizeof(struct hpet_dev) * num_timers, GFP_KERNEL);
+	if (!hpet_devs)
+		return;
+
+	hpet_num_timers = num_timers;
+
+	for (i = start_timer; i < num_timers - RESERVE_TIMERS; i++) {
+		struct hpet_dev *hdev = &hpet_devs[num_timers_used];
+		unsigned long cfg = hpet_readl(HPET_Tn_CFG(i));
+
+		/* Only consider HPET timer with MSI support */
+		if (!(cfg & HPET_TN_FSB_CAP))
+			continue;
+
+		hdev->flags = 0;
+		if (cfg & HPET_TN_PERIODIC_CAP)
+			hdev->flags |= HPET_DEV_PERI_CAP;
+		hdev->num = i;
+
+		sprintf(hdev->name, "hpet%d", i);
+		if (hpet_assign_irq(hdev))
+			continue;
+
+		hdev->flags |= HPET_DEV_FSB_CAP;
+		hdev->flags |= HPET_DEV_VALID;
+		num_timers_used++;
+		if (num_timers_used == num_possible_cpus())
+			break;
+	}
+
+	printk(KERN_INFO "HPET: %d timers in total, %d timers will be used for per-cpu timer\n",
+		num_timers, num_timers_used);
+}
+
+#ifdef CONFIG_HPET
+static void hpet_reserve_msi_timers(struct hpet_data *hd)
+{
+	int i;
+
+	if (!hpet_devs)
+		return;
+
+	for (i = 0; i < hpet_num_timers; i++) {
+		struct hpet_dev *hdev = &hpet_devs[i];
+
+		if (!(hdev->flags & HPET_DEV_VALID))
+			continue;
+
+		hd->hd_irq[hdev->num] = hdev->irq;
+		hpet_reserve_timer(hd, hdev->num);
+	}
+}
+#endif
+
+static struct hpet_dev *hpet_get_unused_timer(void)
+{
+	int i;
+
+	if (!hpet_devs)
+		return NULL;
+
+	for (i = 0; i < hpet_num_timers; i++) {
+		struct hpet_dev *hdev = &hpet_devs[i];
+
+		if (!(hdev->flags & HPET_DEV_VALID))
+			continue;
+		if (test_and_set_bit(HPET_DEV_USED_BIT,
+			(unsigned long *)&hdev->flags))
+			continue;
+		return hdev;
+	}
+	return NULL;
+}
+
+struct hpet_work_struct {
+	struct delayed_work work;
+	struct completion complete;
+};
+
+static void hpet_work(struct work_struct *w)
+{
+	struct hpet_dev *hdev;
+	int cpu = smp_processor_id();
+	struct hpet_work_struct *hpet_work;
+
+	hpet_work = container_of(w, struct hpet_work_struct, work.work);
+
+	hdev = hpet_get_unused_timer();
+	if (hdev)
+		init_one_hpet_msi_clockevent(hdev, cpu);
+
+	complete(&hpet_work->complete);
+}
+
+static int hpet_cpuhp_notify(struct notifier_block *n,
+		unsigned long action, void *hcpu)
+{
+	unsigned long cpu = (unsigned long)hcpu;
+	struct hpet_work_struct work;
+	struct hpet_dev *hdev = per_cpu(cpu_hpet_dev, cpu);
+
+	switch (action & 0xf) {
+	case CPU_ONLINE:
+		INIT_DELAYED_WORK(&work.work, hpet_work);
+		init_completion(&work.complete);
+		/* FIXME: add schedule_work_on() */
+		schedule_delayed_work_on(cpu, &work.work, 0);
+		wait_for_completion(&work.complete);
+		break;
+	case CPU_DEAD:
+		if (hdev) {
+			free_irq(hdev->irq, hdev);
+			hdev->flags &= ~HPET_DEV_USED;
+			per_cpu(cpu_hpet_dev, cpu) = NULL;
+		}
+		break;
+	}
+	return NOTIFY_OK;
+}
+#else
+
+static int hpet_setup_msi_irq(unsigned int irq)
+{
+	return 0;
+}
+static void hpet_msi_capability_lookup(unsigned int start_timer)
+{
+	return;
+}
+
+#ifdef CONFIG_HPET
+static void hpet_reserve_msi_timers(struct hpet_data *hd)
+{
+	return;
+}
+#endif
+
+static int hpet_cpuhp_notify(struct notifier_block *n,
+		unsigned long action, void *hcpu)
+{
+	return NOTIFY_OK;
+}
+
+#endif
+
 /*
  * Clock source related code
  */
@@ -423,8 +803,10 @@ int __init hpet_enable(void)
 
 	if (id & HPET_ID_LEGSUP) {
 		hpet_legacy_clockevent_register();
+		hpet_msi_capability_lookup(2);
 		return 1;
 	}
+	hpet_msi_capability_lookup(0);
 	return 0;
 
 out_nohpet:
@@ -441,6 +823,8 @@ out_nohpet:
  */
 static __init int hpet_late_init(void)
 {
+	int cpu;
+
 	if (boot_hpet_disable)
 		return -ENODEV;
 
@@ -456,6 +840,13 @@ static __init int hpet_late_init(void)
 
 	hpet_reserve_platform_timers(hpet_readl(HPET_ID));
 
+	for_each_online_cpu(cpu) {
+		hpet_cpuhp_notify(NULL, CPU_ONLINE, (void *)(long)cpu);
+	}
+
+	/* This notifier should be called after workqueue is ready */
+	hotcpu_notifier(hpet_cpuhp_notify, -20);
+
 	return 0;
 }
 fs_initcall(hpet_late_init);
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index eb9ddd8..1f20608 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -21,9 +21,12 @@
 # include <asm/sigcontext32.h>
 # include <asm/user32.h>
 #else
-# define save_i387_ia32		save_i387
-# define restore_i387_ia32	restore_i387
+# define save_i387_xstate_ia32		save_i387_xstate
+# define restore_i387_xstate_ia32	restore_i387_xstate
 # define _fpstate_ia32		_fpstate
+# define _xstate_ia32		_xstate
+# define sig_xstate_ia32_size   sig_xstate_size
+# define fx_sw_reserved_ia32	fx_sw_reserved
 # define user_i387_ia32_struct	user_i387_struct
 # define user32_fxsr_struct	user_fxsr_struct
 #endif
@@ -36,6 +39,7 @@
 
 static unsigned int		mxcsr_feature_mask __read_mostly = 0xffffffffu;
 unsigned int xstate_size;
+unsigned int sig_xstate_ia32_size = sizeof(struct _fpstate_ia32);
 static struct i387_fxsave_struct fx_scratch __cpuinitdata;
 
 void __cpuinit mxcsr_feature_mask_init(void)
@@ -61,6 +65,11 @@ void __init init_thread_xstate(void)
 		return;
 	}
 
+	if (cpu_has_xsave) {
+		xsave_cntxt_init();
+		return;
+	}
+
 	if (cpu_has_fxsr)
 		xstate_size = sizeof(struct i387_fxsave_struct);
 #ifdef CONFIG_X86_32
@@ -83,9 +92,19 @@ void __cpuinit fpu_init(void)
 
 	write_cr0(oldcr0 & ~(X86_CR0_TS|X86_CR0_EM)); /* clear TS and EM */
 
+	/*
+	 * Boot processor to setup the FP and extended state context info.
+	 */
+	if (!smp_processor_id())
+		init_thread_xstate();
+	xsave_init();
+
 	mxcsr_feature_mask_init();
 	/* clean state in init */
-	current_thread_info()->status = 0;
+	if (cpu_has_xsave)
+		current_thread_info()->status = TS_XSAVE;
+	else
+		current_thread_info()->status = 0;
 	clear_used_math();
 }
 #endif	/* CONFIG_X86_64 */
@@ -195,6 +214,13 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
 	 */
 	target->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
 
+	/*
+	 * update the header bits in the xsave header, indicating the
+	 * presence of FP and SSE state.
+	 */
+	if (cpu_has_xsave)
+		target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
+
 	return ret;
 }
 
@@ -395,6 +421,12 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 	if (!ret)
 		convert_to_fxsr(target, &env);
 
+	/*
+	 * update the header bit in the xsave header, indicating the
+	 * presence of FP.
+	 */
+	if (cpu_has_xsave)
+		target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FP;
 	return ret;
 }
 
@@ -407,7 +439,6 @@ static inline int save_i387_fsave(struct _fpstate_ia32 __user *buf)
 	struct task_struct *tsk = current;
 	struct i387_fsave_struct *fp = &tsk->thread.xstate->fsave;
 
-	unlazy_fpu(tsk);
 	fp->status = fp->swd;
 	if (__copy_to_user(buf, fp, sizeof(struct i387_fsave_struct)))
 		return -1;
@@ -421,8 +452,6 @@ static int save_i387_fxsave(struct _fpstate_ia32 __user *buf)
 	struct user_i387_ia32_struct env;
 	int err = 0;
 
-	unlazy_fpu(tsk);
-
 	convert_from_fxsr(&env, tsk);
 	if (__copy_to_user(buf, &env, sizeof(env)))
 		return -1;
@@ -432,16 +461,54 @@ static int save_i387_fxsave(struct _fpstate_ia32 __user *buf)
 	if (err)
 		return -1;
 
-	if (__copy_to_user(&buf->_fxsr_env[0], fx,
-			   sizeof(struct i387_fxsave_struct)))
+	if (__copy_to_user(&buf->_fxsr_env[0], fx, xstate_size))
+		return -1;
+	return 1;
+}
+
+static int save_i387_xsave(void __user *buf)
+{
+	struct task_struct *tsk = current;
+	struct _fpstate_ia32 __user *fx = buf;
+	int err = 0;
+
+	/*
+	 * For legacy compatible, we always set FP/SSE bits in the bit
+	 * vector while saving the state to the user context.
+	 * This will enable us capturing any changes(during sigreturn) to
+	 * the FP/SSE bits by the legacy applications which don't touch
+	 * xstate_bv in the xsave header.
+	 *
+	 * xsave aware applications can change the xstate_bv in the xsave
+	 * header as well as change any contents in the memory layout.
+	 * xrestore as part of sigreturn will capture all the changes.
+	 */
+	tsk->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
+
+	if (save_i387_fxsave(fx) < 0)
+		return -1;
+
+	err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved_ia32,
+			     sizeof(struct _fpx_sw_bytes));
+	err |= __put_user(FP_XSTATE_MAGIC2,
+			  (__u32 __user *) (buf + sig_xstate_ia32_size
+					    - FP_XSTATE_MAGIC2_SIZE));
+	if (err)
 		return -1;
+
 	return 1;
 }
 
-int save_i387_ia32(struct _fpstate_ia32 __user *buf)
+int save_i387_xstate_ia32(void __user *buf)
 {
+	struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf;
+	struct task_struct *tsk = current;
+
 	if (!used_math())
 		return 0;
+
+	if (!access_ok(VERIFY_WRITE, buf, sig_xstate_ia32_size))
+		return -EACCES;
 	/*
 	 * This will cause a "finit" to be triggered by the next
 	 * attempted FPU operation by the 'current' process.
@@ -451,13 +518,17 @@ int save_i387_ia32(struct _fpstate_ia32 __user *buf)
 	if (!HAVE_HWFP) {
 		return fpregs_soft_get(current, NULL,
 				       0, sizeof(struct user_i387_ia32_struct),
-				       NULL, buf) ? -1 : 1;
+				       NULL, fp) ? -1 : 1;
 	}
 
+	unlazy_fpu(tsk);
+
+	if (cpu_has_xsave)
+		return save_i387_xsave(fp);
 	if (cpu_has_fxsr)
-		return save_i387_fxsave(buf);
+		return save_i387_fxsave(fp);
 	else
-		return save_i387_fsave(buf);
+		return save_i387_fsave(fp);
 }
 
 static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf)
@@ -468,14 +539,15 @@ static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf)
 				sizeof(struct i387_fsave_struct));
 }
 
-static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf)
+static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf,
+			       unsigned int size)
 {
 	struct task_struct *tsk = current;
 	struct user_i387_ia32_struct env;
 	int err;
 
 	err = __copy_from_user(&tsk->thread.xstate->fxsave, &buf->_fxsr_env[0],
-			       sizeof(struct i387_fxsave_struct));
+			       size);
 	/* mxcsr reserved bits must be masked to zero for security reasons */
 	tsk->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
 	if (err || __copy_from_user(&env, buf, sizeof(env)))
@@ -485,14 +557,69 @@ static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf)
 	return 0;
 }
 
-int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
+static int restore_i387_xsave(void __user *buf)
+{
+	struct _fpx_sw_bytes fx_sw_user;
+	struct _fpstate_ia32 __user *fx_user =
+			((struct _fpstate_ia32 __user *) buf);
+	struct i387_fxsave_struct __user *fx =
+		(struct i387_fxsave_struct __user *) &fx_user->_fxsr_env[0];
+	struct xsave_hdr_struct *xsave_hdr =
+				&current->thread.xstate->xsave.xsave_hdr;
+	u64 mask;
+	int err;
+
+	if (check_for_xstate(fx, buf, &fx_sw_user))
+		goto fx_only;
+
+	mask = fx_sw_user.xstate_bv;
+
+	err = restore_i387_fxsave(buf, fx_sw_user.xstate_size);
+
+	xsave_hdr->xstate_bv &= pcntxt_mask;
+	/*
+	 * These bits must be zero.
+	 */
+	xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0;
+
+	/*
+	 * Init the state that is not present in the memory layout
+	 * and enabled by the OS.
+	 */
+	mask = ~(pcntxt_mask & ~mask);
+	xsave_hdr->xstate_bv &= mask;
+
+	return err;
+fx_only:
+	/*
+	 * Couldn't find the extended state information in the memory
+	 * layout. Restore the FP/SSE and init the other extended state
+	 * enabled by the OS.
+	 */
+	xsave_hdr->xstate_bv = XSTATE_FPSSE;
+	return restore_i387_fxsave(buf, sizeof(struct i387_fxsave_struct));
+}
+
+int restore_i387_xstate_ia32(void __user *buf)
 {
 	int err;
 	struct task_struct *tsk = current;
+	struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf;
 
 	if (HAVE_HWFP)
 		clear_fpu(tsk);
 
+	if (!buf) {
+		if (used_math()) {
+			clear_fpu(tsk);
+			clear_used_math();
+		}
+
+		return 0;
+	} else
+		if (!access_ok(VERIFY_READ, buf, sig_xstate_ia32_size))
+			return -EACCES;
+
 	if (!used_math()) {
 		err = init_fpu(tsk);
 		if (err)
@@ -500,14 +627,17 @@ int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
 	}
 
 	if (HAVE_HWFP) {
-		if (cpu_has_fxsr)
-			err = restore_i387_fxsave(buf);
+		if (cpu_has_xsave)
+			err = restore_i387_xsave(buf);
+		else if (cpu_has_fxsr)
+			err = restore_i387_fxsave(fp, sizeof(struct
+							   i387_fxsave_struct));
 		else
-			err = restore_i387_fsave(buf);
+			err = restore_i387_fsave(fp);
 	} else {
 		err = fpregs_soft_set(current, NULL,
 				      0, sizeof(struct user_i387_ia32_struct),
-				      NULL, buf) != 0;
+				      NULL, fp) != 0;
 	}
 	set_used_math();
 
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index dc92b49..4b8a53d 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -282,6 +282,30 @@ static int __init i8259A_init_sysfs(void)
 
 device_initcall(i8259A_init_sysfs);
 
+void mask_8259A(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
+	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+void unmask_8259A(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
+	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
 void init_8259A(int auto_eoi)
 {
 	unsigned long flags;
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
new file mode 100644
index 0000000..b764d74
--- /dev/null
+++ b/arch/x86/kernel/io_apic.c
@@ -0,0 +1,3896 @@
+/*
+ *	Intel IO-APIC support for multi-Pentium hosts.
+ *
+ *	Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
+ *
+ *	Many thanks to Stig Venaas for trying out countless experimental
+ *	patches and reporting/debugging problems patiently!
+ *
+ *	(c) 1999, Multiple IO-APIC support, developed by
+ *	Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
+ *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
+ *	further tested and cleaned up by Zach Brown <zab@redhat.com>
+ *	and Ingo Molnar <mingo@redhat.com>
+ *
+ *	Fixes
+ *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
+ *					thanks to Eric Gilmore
+ *					and Rolf G. Tews
+ *					for testing these extensively
+ *	Paul Diefenbaugh	:	Added full ACPI support
+ */
+
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/mc146818rtc.h>
+#include <linux/compiler.h>
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/msi.h>
+#include <linux/htirq.h>
+#include <linux/freezer.h>
+#include <linux/kthread.h>
+#include <linux/jiffies.h>	/* time_after() */
+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+#endif
+#include <linux/bootmem.h>
+#include <linux/dmar.h>
+#include <linux/hpet.h>
+
+#include <asm/idle.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/desc.h>
+#include <asm/proto.h>
+#include <asm/acpi.h>
+#include <asm/dma.h>
+#include <asm/timer.h>
+#include <asm/i8259.h>
+#include <asm/nmi.h>
+#include <asm/msidef.h>
+#include <asm/hypertransport.h>
+#include <asm/setup.h>
+#include <asm/irq_remapping.h>
+#include <asm/hpet.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_irq.h>
+
+#include <mach_ipi.h>
+#include <mach_apic.h>
+#include <mach_apicdef.h>
+
+#define __apicdebuginit(type) static type __init
+
+/*
+ *      Is the SiS APIC rmw bug present ?
+ *      -1 = don't know, 0 = no, 1 = yes
+ */
+int sis_apic_bug = -1;
+
+static DEFINE_SPINLOCK(ioapic_lock);
+static DEFINE_SPINLOCK(vector_lock);
+
+/*
+ * # of IRQ routing registers
+ */
+int nr_ioapic_registers[MAX_IO_APICS];
+
+/* I/O APIC entries */
+struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
+int nr_ioapics;
+
+/* MP IRQ source entries */
+struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* # of MP IRQ source entries */
+int mp_irq_entries;
+
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+int mp_bus_id_to_type[MAX_MP_BUSSES];
+#endif
+
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
+int skip_ioapic_setup;
+
+static int __init parse_noapic(char *str)
+{
+	/* disable IO-APIC */
+	disable_ioapic_setup();
+	return 0;
+}
+early_param("noapic", parse_noapic);
+
+struct irq_pin_list;
+struct irq_cfg {
+	unsigned int irq;
+	struct irq_pin_list *irq_2_pin;
+	cpumask_t domain;
+	cpumask_t old_domain;
+	unsigned move_cleanup_count;
+	u8 vector;
+	u8 move_in_progress : 1;
+};
+
+/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
+static struct irq_cfg irq_cfgx[NR_IRQS] = {
+	[0]  = { .irq =  0, .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR,  },
+	[1]  = { .irq =  1, .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR,  },
+	[2]  = { .irq =  2, .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR,  },
+	[3]  = { .irq =  3, .domain = CPU_MASK_ALL, .vector = IRQ3_VECTOR,  },
+	[4]  = { .irq =  4, .domain = CPU_MASK_ALL, .vector = IRQ4_VECTOR,  },
+	[5]  = { .irq =  5, .domain = CPU_MASK_ALL, .vector = IRQ5_VECTOR,  },
+	[6]  = { .irq =  6, .domain = CPU_MASK_ALL, .vector = IRQ6_VECTOR,  },
+	[7]  = { .irq =  7, .domain = CPU_MASK_ALL, .vector = IRQ7_VECTOR,  },
+	[8]  = { .irq =  8, .domain = CPU_MASK_ALL, .vector = IRQ8_VECTOR,  },
+	[9]  = { .irq =  9, .domain = CPU_MASK_ALL, .vector = IRQ9_VECTOR,  },
+	[10] = { .irq = 10, .domain = CPU_MASK_ALL, .vector = IRQ10_VECTOR, },
+	[11] = { .irq = 11, .domain = CPU_MASK_ALL, .vector = IRQ11_VECTOR, },
+	[12] = { .irq = 12, .domain = CPU_MASK_ALL, .vector = IRQ12_VECTOR, },
+	[13] = { .irq = 13, .domain = CPU_MASK_ALL, .vector = IRQ13_VECTOR, },
+	[14] = { .irq = 14, .domain = CPU_MASK_ALL, .vector = IRQ14_VECTOR, },
+	[15] = { .irq = 15, .domain = CPU_MASK_ALL, .vector = IRQ15_VECTOR, },
+};
+
+#define for_each_irq_cfg(irq, cfg)		\
+	for (irq = 0, cfg = irq_cfgx; irq < nr_irqs; irq++, cfg++)
+
+static struct irq_cfg *irq_cfg(unsigned int irq)
+{
+	return irq < nr_irqs ? irq_cfgx + irq : NULL;
+}
+
+static struct irq_cfg *irq_cfg_alloc(unsigned int irq)
+{
+	return irq_cfg(irq);
+}
+
+/*
+ * Rough estimation of how many shared IRQs there are, can be changed
+ * anytime.
+ */
+#define MAX_PLUS_SHARED_IRQS NR_IRQS
+#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
+
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * the indexing order of this array favors 1:1 mappings
+ * between pins and IRQs.
+ */
+
+struct irq_pin_list {
+	int apic, pin;
+	struct irq_pin_list *next;
+};
+
+static struct irq_pin_list irq_2_pin_head[PIN_MAP_SIZE];
+static struct irq_pin_list *irq_2_pin_ptr;
+
+static void __init irq_2_pin_init(void)
+{
+	struct irq_pin_list *pin = irq_2_pin_head;
+	int i;
+
+	for (i = 1; i < PIN_MAP_SIZE; i++)
+		pin[i-1].next = &pin[i];
+
+	irq_2_pin_ptr = &pin[0];
+}
+
+static struct irq_pin_list *get_one_free_irq_2_pin(void)
+{
+	struct irq_pin_list *pin = irq_2_pin_ptr;
+
+	if (!pin)
+		panic("can not get more irq_2_pin\n");
+
+	irq_2_pin_ptr = pin->next;
+	pin->next = NULL;
+	return pin;
+}
+
+struct io_apic {
+	unsigned int index;
+	unsigned int unused[3];
+	unsigned int data;
+};
+
+static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
+{
+	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
+		+ (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
+}
+
+static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
+{
+	struct io_apic __iomem *io_apic = io_apic_base(apic);
+	writel(reg, &io_apic->index);
+	return readl(&io_apic->data);
+}
+
+static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+{
+	struct io_apic __iomem *io_apic = io_apic_base(apic);
+	writel(reg, &io_apic->index);
+	writel(value, &io_apic->data);
+}
+
+/*
+ * Re-write a value: to be used for read-modify-write
+ * cycles where the read already set up the index register.
+ *
+ * Older SiS APIC requires we rewrite the index register
+ */
+static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
+{
+	struct io_apic __iomem *io_apic = io_apic_base(apic);
+
+	if (sis_apic_bug)
+		writel(reg, &io_apic->index);
+	writel(value, &io_apic->data);
+}
+
+static bool io_apic_level_ack_pending(unsigned int irq)
+{
+	struct irq_pin_list *entry;
+	unsigned long flags;
+	struct irq_cfg *cfg = irq_cfg(irq);
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	entry = cfg->irq_2_pin;
+	for (;;) {
+		unsigned int reg;
+		int pin;
+
+		if (!entry)
+			break;
+		pin = entry->pin;
+		reg = io_apic_read(entry->apic, 0x10 + pin*2);
+		/* Is the remote IRR bit set? */
+		if (reg & IO_APIC_REDIR_REMOTE_IRR) {
+			spin_unlock_irqrestore(&ioapic_lock, flags);
+			return true;
+		}
+		if (!entry->next)
+			break;
+		entry = entry->next;
+	}
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return false;
+}
+
+union entry_union {
+	struct { u32 w1, w2; };
+	struct IO_APIC_route_entry entry;
+};
+
+static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
+{
+	union entry_union eu;
+	unsigned long flags;
+	spin_lock_irqsave(&ioapic_lock, flags);
+	eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
+	eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+	return eu.entry;
+}
+
+/*
+ * When we write a new IO APIC routing entry, we need to write the high
+ * word first! If the mask bit in the low word is clear, we will enable
+ * the interrupt, and we need to make sure the entry is fully populated
+ * before that happens.
+ */
+static void
+__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+{
+	union entry_union eu;
+	eu.entry = e;
+	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+}
+
+static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__ioapic_write_entry(apic, pin, e);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+/*
+ * When we mask an IO APIC routing entry, we need to write the low
+ * word first, in order to set the mask bit before we change the
+ * high bits!
+ */
+static void ioapic_mask_entry(int apic, int pin)
+{
+	unsigned long flags;
+	union entry_union eu = { .entry.mask = 1 };
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+#ifdef CONFIG_SMP
+static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
+{
+	int apic, pin;
+	struct irq_cfg *cfg;
+	struct irq_pin_list *entry;
+
+	cfg = irq_cfg(irq);
+	entry = cfg->irq_2_pin;
+	for (;;) {
+		unsigned int reg;
+
+		if (!entry)
+			break;
+
+		apic = entry->apic;
+		pin = entry->pin;
+#ifdef CONFIG_INTR_REMAP
+		/*
+		 * With interrupt-remapping, destination information comes
+		 * from interrupt-remapping table entry.
+		 */
+		if (!irq_remapped(irq))
+			io_apic_write(apic, 0x11 + pin*2, dest);
+#else
+		io_apic_write(apic, 0x11 + pin*2, dest);
+#endif
+		reg = io_apic_read(apic, 0x10 + pin*2);
+		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
+		reg |= vector;
+		io_apic_modify(apic, 0x10 + pin*2, reg);
+		if (!entry->next)
+			break;
+		entry = entry->next;
+	}
+}
+
+static int assign_irq_vector(int irq, cpumask_t mask);
+
+static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg;
+	unsigned long flags;
+	unsigned int dest;
+	cpumask_t tmp;
+	struct irq_desc *desc;
+
+	cpus_and(tmp, mask, cpu_online_map);
+	if (cpus_empty(tmp))
+		return;
+
+	cfg = irq_cfg(irq);
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cpus_and(tmp, cfg->domain, mask);
+	dest = cpu_mask_to_apicid(tmp);
+	/*
+	 * Only the high 8 bits are valid.
+	 */
+	dest = SET_APIC_LOGICAL_ID(dest);
+
+	desc = irq_to_desc(irq);
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__target_IO_APIC_irq(irq, dest, cfg->vector);
+	desc->affinity = mask;
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
+ * shared ISA-space IRQs, so we have to support them. We are super
+ * fast in the common case, and fast for shared ISA-space IRQs.
+ */
+static void add_pin_to_irq(unsigned int irq, int apic, int pin)
+{
+	struct irq_cfg *cfg;
+	struct irq_pin_list *entry;
+
+	/* first time to refer irq_cfg, so with new */
+	cfg = irq_cfg_alloc(irq);
+	entry = cfg->irq_2_pin;
+	if (!entry) {
+		entry = get_one_free_irq_2_pin();
+		cfg->irq_2_pin = entry;
+		entry->apic = apic;
+		entry->pin = pin;
+		return;
+	}
+
+	while (entry->next) {
+		/* not again, please */
+		if (entry->apic == apic && entry->pin == pin)
+			return;
+
+		entry = entry->next;
+	}
+
+	entry->next = get_one_free_irq_2_pin();
+	entry = entry->next;
+	entry->apic = apic;
+	entry->pin = pin;
+}
+
+/*
+ * Reroute an IRQ to a different pin.
+ */
+static void __init replace_pin_at_irq(unsigned int irq,
+				      int oldapic, int oldpin,
+				      int newapic, int newpin)
+{
+	struct irq_cfg *cfg = irq_cfg(irq);
+	struct irq_pin_list *entry = cfg->irq_2_pin;
+	int replaced = 0;
+
+	while (entry) {
+		if (entry->apic == oldapic && entry->pin == oldpin) {
+			entry->apic = newapic;
+			entry->pin = newpin;
+			replaced = 1;
+			/* every one is different, right? */
+			break;
+		}
+		entry = entry->next;
+	}
+
+	/* why? call replace before add? */
+	if (!replaced)
+		add_pin_to_irq(irq, newapic, newpin);
+}
+
+static inline void io_apic_modify_irq(unsigned int irq,
+				int mask_and, int mask_or,
+				void (*final)(struct irq_pin_list *entry))
+{
+	int pin;
+	struct irq_cfg *cfg;
+	struct irq_pin_list *entry;
+
+	cfg = irq_cfg(irq);
+	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+		unsigned int reg;
+		pin = entry->pin;
+		reg = io_apic_read(entry->apic, 0x10 + pin * 2);
+		reg &= mask_and;
+		reg |= mask_or;
+		io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
+		if (final)
+			final(entry);
+	}
+}
+
+static void __unmask_IO_APIC_irq(unsigned int irq)
+{
+	io_apic_modify_irq(irq, ~IO_APIC_REDIR_MASKED, 0, NULL);
+}
+
+#ifdef CONFIG_X86_64
+void io_apic_sync(struct irq_pin_list *entry)
+{
+	/*
+	 * Synchronize the IO-APIC and the CPU by doing
+	 * a dummy read from the IO-APIC
+	 */
+	struct io_apic __iomem *io_apic;
+	io_apic = io_apic_base(entry->apic);
+	readl(&io_apic->data);
+}
+
+static void __mask_IO_APIC_irq(unsigned int irq)
+{
+	io_apic_modify_irq(irq, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
+}
+#else /* CONFIG_X86_32 */
+static void __mask_IO_APIC_irq(unsigned int irq)
+{
+	io_apic_modify_irq(irq, ~0, IO_APIC_REDIR_MASKED, NULL);
+}
+
+static void __mask_and_edge_IO_APIC_irq(unsigned int irq)
+{
+	io_apic_modify_irq(irq, ~IO_APIC_REDIR_LEVEL_TRIGGER,
+			IO_APIC_REDIR_MASKED, NULL);
+}
+
+static void __unmask_and_level_IO_APIC_irq(unsigned int irq)
+{
+	io_apic_modify_irq(irq, ~IO_APIC_REDIR_MASKED,
+			IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
+}
+#endif /* CONFIG_X86_32 */
+
+static void mask_IO_APIC_irq (unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__mask_IO_APIC_irq(irq);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void unmask_IO_APIC_irq (unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__unmask_IO_APIC_irq(irq);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
+{
+	struct IO_APIC_route_entry entry;
+
+	/* Check delivery_mode to be sure we're not clearing an SMI pin */
+	entry = ioapic_read_entry(apic, pin);
+	if (entry.delivery_mode == dest_SMI)
+		return;
+	/*
+	 * Disable it in the IO-APIC irq-routing table:
+	 */
+	ioapic_mask_entry(apic, pin);
+}
+
+static void clear_IO_APIC (void)
+{
+	int apic, pin;
+
+	for (apic = 0; apic < nr_ioapics; apic++)
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
+			clear_IO_APIC_pin(apic, pin);
+}
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_X86_32)
+void send_IPI_self(int vector)
+{
+	unsigned int cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+	cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	apic_write(APIC_ICR, cfg);
+}
+#endif /* !CONFIG_SMP && CONFIG_X86_32*/
+
+#ifdef CONFIG_X86_32
+/*
+ * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
+ * specific CPU-side IRQs.
+ */
+
+#define MAX_PIRQS 8
+static int pirq_entries [MAX_PIRQS];
+static int pirqs_enabled;
+
+static int __init ioapic_pirq_setup(char *str)
+{
+	int i, max;
+	int ints[MAX_PIRQS+1];
+
+	get_options(str, ARRAY_SIZE(ints), ints);
+
+	for (i = 0; i < MAX_PIRQS; i++)
+		pirq_entries[i] = -1;
+
+	pirqs_enabled = 1;
+	apic_printk(APIC_VERBOSE, KERN_INFO
+			"PIRQ redirection, working around broken MP-BIOS.\n");
+	max = MAX_PIRQS;
+	if (ints[0] < MAX_PIRQS)
+		max = ints[0];
+
+	for (i = 0; i < max; i++) {
+		apic_printk(APIC_VERBOSE, KERN_DEBUG
+				"... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
+		/*
+		 * PIRQs are mapped upside down, usually.
+		 */
+		pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
+	}
+	return 1;
+}
+
+__setup("pirq=", ioapic_pirq_setup);
+#endif /* CONFIG_X86_32 */
+
+#ifdef CONFIG_INTR_REMAP
+/* I/O APIC RTE contents at the OS boot up */
+static struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS];
+
+/*
+ * Saves and masks all the unmasked IO-APIC RTE's
+ */
+int save_mask_IO_APIC_setup(void)
+{
+	union IO_APIC_reg_01 reg_01;
+	unsigned long flags;
+	int apic, pin;
+
+	/*
+	 * The number of IO-APIC IRQ registers (== #pins):
+	 */
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_01.raw = io_apic_read(apic, 1);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+	}
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		early_ioapic_entries[apic] =
+			kzalloc(sizeof(struct IO_APIC_route_entry) *
+				nr_ioapic_registers[apic], GFP_KERNEL);
+		if (!early_ioapic_entries[apic])
+			goto nomem;
+	}
+
+	for (apic = 0; apic < nr_ioapics; apic++)
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+			struct IO_APIC_route_entry entry;
+
+			entry = early_ioapic_entries[apic][pin] =
+				ioapic_read_entry(apic, pin);
+			if (!entry.mask) {
+				entry.mask = 1;
+				ioapic_write_entry(apic, pin, entry);
+			}
+		}
+
+	return 0;
+
+nomem:
+	while (apic >= 0)
+		kfree(early_ioapic_entries[apic--]);
+	memset(early_ioapic_entries, 0,
+		ARRAY_SIZE(early_ioapic_entries));
+
+	return -ENOMEM;
+}
+
+void restore_IO_APIC_setup(void)
+{
+	int apic, pin;
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		if (!early_ioapic_entries[apic])
+			break;
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
+			ioapic_write_entry(apic, pin,
+					   early_ioapic_entries[apic][pin]);
+		kfree(early_ioapic_entries[apic]);
+		early_ioapic_entries[apic] = NULL;
+	}
+}
+
+void reinit_intr_remapped_IO_APIC(int intr_remapping)
+{
+	/*
+	 * for now plain restore of previous settings.
+	 * TBD: In the case of OS enabling interrupt-remapping,
+	 * IO-APIC RTE's need to be setup to point to interrupt-remapping
+	 * table entries. for now, do a plain restore, and wait for
+	 * the setup_IO_APIC_irqs() to do proper initialization.
+	 */
+	restore_IO_APIC_setup();
+}
+#endif
+
+/*
+ * Find the IRQ entry number of a certain pin.
+ */
+static int find_irq_entry(int apic, int pin, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++)
+		if (mp_irqs[i].mp_irqtype == type &&
+		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
+		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
+		    mp_irqs[i].mp_dstirq == pin)
+			return i;
+
+	return -1;
+}
+
+/*
+ * Find the pin to which IRQ[irq] (ISA) is connected
+ */
+static int __init find_isa_irq_pin(int irq, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].mp_srcbus;
+
+		if (test_bit(lbus, mp_bus_not_pci) &&
+		    (mp_irqs[i].mp_irqtype == type) &&
+		    (mp_irqs[i].mp_srcbusirq == irq))
+
+			return mp_irqs[i].mp_dstirq;
+	}
+	return -1;
+}
+
+static int __init find_isa_irq_apic(int irq, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].mp_srcbus;
+
+		if (test_bit(lbus, mp_bus_not_pci) &&
+		    (mp_irqs[i].mp_irqtype == type) &&
+		    (mp_irqs[i].mp_srcbusirq == irq))
+			break;
+	}
+	if (i < mp_irq_entries) {
+		int apic;
+		for(apic = 0; apic < nr_ioapics; apic++) {
+			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
+				return apic;
+		}
+	}
+
+	return -1;
+}
+
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+static int pin_2_irq(int idx, int apic, int pin);
+
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
+{
+	int apic, i, best_guess = -1;
+
+	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+		bus, slot, pin);
+	if (test_bit(bus, mp_bus_not_pci)) {
+		apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+		return -1;
+	}
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].mp_srcbus;
+
+		for (apic = 0; apic < nr_ioapics; apic++)
+			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
+			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
+				break;
+
+		if (!test_bit(lbus, mp_bus_not_pci) &&
+		    !mp_irqs[i].mp_irqtype &&
+		    (bus == lbus) &&
+		    (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
+			int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
+
+			if (!(apic || IO_APIC_IRQ(irq)))
+				continue;
+
+			if (pin == (mp_irqs[i].mp_srcbusirq & 3))
+				return irq;
+			/*
+			 * Use the first all-but-pin matching entry as a
+			 * best-guess fuzzy result for broken mptables.
+			 */
+			if (best_guess < 0)
+				best_guess = irq;
+		}
+	}
+	return best_guess;
+}
+
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+/*
+ * EISA Edge/Level control register, ELCR
+ */
+static int EISA_ELCR(unsigned int irq)
+{
+	if (irq < 16) {
+		unsigned int port = 0x4d0 + (irq >> 3);
+		return (inb(port) >> (irq & 7)) & 1;
+	}
+	apic_printk(APIC_VERBOSE, KERN_INFO
+			"Broken MPtable reports ISA irq %d\n", irq);
+	return 0;
+}
+
+#endif
+
+/* ISA interrupts are always polarity zero edge triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_ISA_trigger(idx)	(0)
+#define default_ISA_polarity(idx)	(0)
+
+/* EISA interrupts are always polarity zero and can be edge or level
+ * trigger depending on the ELCR value.  If an interrupt is listed as
+ * EISA conforming in the MP table, that means its trigger type must
+ * be read in from the ELCR */
+
+#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mp_srcbusirq))
+#define default_EISA_polarity(idx)	default_ISA_polarity(idx)
+
+/* PCI interrupts are always polarity one level triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_PCI_trigger(idx)	(1)
+#define default_PCI_polarity(idx)	(1)
+
+/* MCA interrupts are always polarity zero level triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_MCA_trigger(idx)	(1)
+#define default_MCA_polarity(idx)	default_ISA_polarity(idx)
+
+static int MPBIOS_polarity(int idx)
+{
+	int bus = mp_irqs[idx].mp_srcbus;
+	int polarity;
+
+	/*
+	 * Determine IRQ line polarity (high active or low active):
+	 */
+	switch (mp_irqs[idx].mp_irqflag & 3)
+	{
+		case 0: /* conforms, ie. bus-type dependent polarity */
+			if (test_bit(bus, mp_bus_not_pci))
+				polarity = default_ISA_polarity(idx);
+			else
+				polarity = default_PCI_polarity(idx);
+			break;
+		case 1: /* high active */
+		{
+			polarity = 0;
+			break;
+		}
+		case 2: /* reserved */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			polarity = 1;
+			break;
+		}
+		case 3: /* low active */
+		{
+			polarity = 1;
+			break;
+		}
+		default: /* invalid */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			polarity = 1;
+			break;
+		}
+	}
+	return polarity;
+}
+
+static int MPBIOS_trigger(int idx)
+{
+	int bus = mp_irqs[idx].mp_srcbus;
+	int trigger;
+
+	/*
+	 * Determine IRQ trigger mode (edge or level sensitive):
+	 */
+	switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
+	{
+		case 0: /* conforms, ie. bus-type dependent */
+			if (test_bit(bus, mp_bus_not_pci))
+				trigger = default_ISA_trigger(idx);
+			else
+				trigger = default_PCI_trigger(idx);
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+			switch (mp_bus_id_to_type[bus]) {
+				case MP_BUS_ISA: /* ISA pin */
+				{
+					/* set before the switch */
+					break;
+				}
+				case MP_BUS_EISA: /* EISA pin */
+				{
+					trigger = default_EISA_trigger(idx);
+					break;
+				}
+				case MP_BUS_PCI: /* PCI pin */
+				{
+					/* set before the switch */
+					break;
+				}
+				case MP_BUS_MCA: /* MCA pin */
+				{
+					trigger = default_MCA_trigger(idx);
+					break;
+				}
+				default:
+				{
+					printk(KERN_WARNING "broken BIOS!!\n");
+					trigger = 1;
+					break;
+				}
+			}
+#endif
+			break;
+		case 1: /* edge */
+		{
+			trigger = 0;
+			break;
+		}
+		case 2: /* reserved */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			trigger = 1;
+			break;
+		}
+		case 3: /* level */
+		{
+			trigger = 1;
+			break;
+		}
+		default: /* invalid */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			trigger = 0;
+			break;
+		}
+	}
+	return trigger;
+}
+
+static inline int irq_polarity(int idx)
+{
+	return MPBIOS_polarity(idx);
+}
+
+static inline int irq_trigger(int idx)
+{
+	return MPBIOS_trigger(idx);
+}
+
+int (*ioapic_renumber_irq)(int ioapic, int irq);
+static int pin_2_irq(int idx, int apic, int pin)
+{
+	int irq, i;
+	int bus = mp_irqs[idx].mp_srcbus;
+
+	/*
+	 * Debugging check, we are in big trouble if this message pops up!
+	 */
+	if (mp_irqs[idx].mp_dstirq != pin)
+		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
+
+	if (test_bit(bus, mp_bus_not_pci)) {
+		irq = mp_irqs[idx].mp_srcbusirq;
+	} else {
+		/*
+		 * PCI IRQs are mapped in order
+		 */
+		i = irq = 0;
+		while (i < apic)
+			irq += nr_ioapic_registers[i++];
+		irq += pin;
+		/*
+                 * For MPS mode, so far only needed by ES7000 platform
+                 */
+		if (ioapic_renumber_irq)
+			irq = ioapic_renumber_irq(apic, irq);
+	}
+
+#ifdef CONFIG_X86_32
+	/*
+	 * PCI IRQ command line redirection. Yes, limits are hardcoded.
+	 */
+	if ((pin >= 16) && (pin <= 23)) {
+		if (pirq_entries[pin-16] != -1) {
+			if (!pirq_entries[pin-16]) {
+				apic_printk(APIC_VERBOSE, KERN_DEBUG
+						"disabling PIRQ%d\n", pin-16);
+			} else {
+				irq = pirq_entries[pin-16];
+				apic_printk(APIC_VERBOSE, KERN_DEBUG
+						"using PIRQ%d -> IRQ %d\n",
+						pin-16, irq);
+			}
+		}
+	}
+#endif
+
+	return irq;
+}
+
+void lock_vector_lock(void)
+{
+	/* Used to the online set of cpus does not change
+	 * during assign_irq_vector.
+	 */
+	spin_lock(&vector_lock);
+}
+
+void unlock_vector_lock(void)
+{
+	spin_unlock(&vector_lock);
+}
+
+static int __assign_irq_vector(int irq, cpumask_t mask)
+{
+	/*
+	 * NOTE! The local APIC isn't very good at handling
+	 * multiple interrupts at the same interrupt level.
+	 * As the interrupt level is determined by taking the
+	 * vector number and shifting that right by 4, we
+	 * want to spread these out a bit so that they don't
+	 * all fall in the same interrupt level.
+	 *
+	 * Also, we've got to be careful not to trash gate
+	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
+	 */
+	static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
+	unsigned int old_vector;
+	int cpu;
+	struct irq_cfg *cfg;
+
+	cfg = irq_cfg(irq);
+
+	/* Only try and allocate irqs on cpus that are present */
+	cpus_and(mask, mask, cpu_online_map);
+
+	if ((cfg->move_in_progress) || cfg->move_cleanup_count)
+		return -EBUSY;
+
+	old_vector = cfg->vector;
+	if (old_vector) {
+		cpumask_t tmp;
+		cpus_and(tmp, cfg->domain, mask);
+		if (!cpus_empty(tmp))
+			return 0;
+	}
+
+	for_each_cpu_mask_nr(cpu, mask) {
+		cpumask_t domain, new_mask;
+		int new_cpu;
+		int vector, offset;
+
+		domain = vector_allocation_domain(cpu);
+		cpus_and(new_mask, domain, cpu_online_map);
+
+		vector = current_vector;
+		offset = current_offset;
+next:
+		vector += 8;
+		if (vector >= first_system_vector) {
+			/* If we run out of vectors on large boxen, must share them. */
+			offset = (offset + 1) % 8;
+			vector = FIRST_DEVICE_VECTOR + offset;
+		}
+		if (unlikely(current_vector == vector))
+			continue;
+#ifdef CONFIG_X86_64
+		if (vector == IA32_SYSCALL_VECTOR)
+			goto next;
+#else
+		if (vector == SYSCALL_VECTOR)
+			goto next;
+#endif
+		for_each_cpu_mask_nr(new_cpu, new_mask)
+			if (per_cpu(vector_irq, new_cpu)[vector] != -1)
+				goto next;
+		/* Found one! */
+		current_vector = vector;
+		current_offset = offset;
+		if (old_vector) {
+			cfg->move_in_progress = 1;
+			cfg->old_domain = cfg->domain;
+		}
+		for_each_cpu_mask_nr(new_cpu, new_mask)
+			per_cpu(vector_irq, new_cpu)[vector] = irq;
+		cfg->vector = vector;
+		cfg->domain = domain;
+		return 0;
+	}
+	return -ENOSPC;
+}
+
+static int assign_irq_vector(int irq, cpumask_t mask)
+{
+	int err;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vector_lock, flags);
+	err = __assign_irq_vector(irq, mask);
+	spin_unlock_irqrestore(&vector_lock, flags);
+	return err;
+}
+
+static void __clear_irq_vector(int irq)
+{
+	struct irq_cfg *cfg;
+	cpumask_t mask;
+	int cpu, vector;
+
+	cfg = irq_cfg(irq);
+	BUG_ON(!cfg->vector);
+
+	vector = cfg->vector;
+	cpus_and(mask, cfg->domain, cpu_online_map);
+	for_each_cpu_mask_nr(cpu, mask)
+		per_cpu(vector_irq, cpu)[vector] = -1;
+
+	cfg->vector = 0;
+	cpus_clear(cfg->domain);
+}
+
+void __setup_vector_irq(int cpu)
+{
+	/* Initialize vector_irq on a new cpu */
+	/* This function must be called with vector_lock held */
+	int irq, vector;
+	struct irq_cfg *cfg;
+
+	/* Mark the inuse vectors */
+	for_each_irq_cfg(irq, cfg) {
+		if (!cpu_isset(cpu, cfg->domain))
+			continue;
+		vector = cfg->vector;
+		per_cpu(vector_irq, cpu)[vector] = irq;
+	}
+	/* Mark the free vectors */
+	for (vector = 0; vector < NR_VECTORS; ++vector) {
+		irq = per_cpu(vector_irq, cpu)[vector];
+		if (irq < 0)
+			continue;
+
+		cfg = irq_cfg(irq);
+		if (!cpu_isset(cpu, cfg->domain))
+			per_cpu(vector_irq, cpu)[vector] = -1;
+	}
+}
+
+static struct irq_chip ioapic_chip;
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip ir_ioapic_chip;
+#endif
+
+#define IOAPIC_AUTO     -1
+#define IOAPIC_EDGE     0
+#define IOAPIC_LEVEL    1
+
+#ifdef CONFIG_X86_32
+static inline int IO_APIC_irq_trigger(int irq)
+{
+	int apic, idx, pin;
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+			idx = find_irq_entry(apic, pin, mp_INT);
+			if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin)))
+				return irq_trigger(idx);
+		}
+	}
+	/*
+         * nonexistent IRQs are edge default
+         */
+	return 0;
+}
+#else
+static inline int IO_APIC_irq_trigger(int irq)
+{
+	return 1;
+}
+#endif
+
+static void ioapic_register_intr(int irq, unsigned long trigger)
+{
+	struct irq_desc *desc;
+
+	desc = irq_to_desc(irq);
+
+	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+	    trigger == IOAPIC_LEVEL)
+		desc->status |= IRQ_LEVEL;
+	else
+		desc->status &= ~IRQ_LEVEL;
+
+#ifdef CONFIG_INTR_REMAP
+	if (irq_remapped(irq)) {
+		desc->status |= IRQ_MOVE_PCNTXT;
+		if (trigger)
+			set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
+						      handle_fasteoi_irq,
+						     "fasteoi");
+		else
+			set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
+						      handle_edge_irq, "edge");
+		return;
+	}
+#endif
+	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+	    trigger == IOAPIC_LEVEL)
+		set_irq_chip_and_handler_name(irq, &ioapic_chip,
+					      handle_fasteoi_irq,
+					      "fasteoi");
+	else
+		set_irq_chip_and_handler_name(irq, &ioapic_chip,
+					      handle_edge_irq, "edge");
+}
+
+static int setup_ioapic_entry(int apic, int irq,
+			      struct IO_APIC_route_entry *entry,
+			      unsigned int destination, int trigger,
+			      int polarity, int vector)
+{
+	/*
+	 * add it to the IO-APIC irq-routing table:
+	 */
+	memset(entry,0,sizeof(*entry));
+
+#ifdef CONFIG_INTR_REMAP
+	if (intr_remapping_enabled) {
+		struct intel_iommu *iommu = map_ioapic_to_ir(apic);
+		struct irte irte;
+		struct IR_IO_APIC_route_entry *ir_entry =
+			(struct IR_IO_APIC_route_entry *) entry;
+		int index;
+
+		if (!iommu)
+			panic("No mapping iommu for ioapic %d\n", apic);
+
+		index = alloc_irte(iommu, irq, 1);
+		if (index < 0)
+			panic("Failed to allocate IRTE for ioapic %d\n", apic);
+
+		memset(&irte, 0, sizeof(irte));
+
+		irte.present = 1;
+		irte.dst_mode = INT_DEST_MODE;
+		irte.trigger_mode = trigger;
+		irte.dlvry_mode = INT_DELIVERY_MODE;
+		irte.vector = vector;
+		irte.dest_id = IRTE_DEST(destination);
+
+		modify_irte(irq, &irte);
+
+		ir_entry->index2 = (index >> 15) & 0x1;
+		ir_entry->zero = 0;
+		ir_entry->format = 1;
+		ir_entry->index = (index & 0x7fff);
+	} else
+#endif
+	{
+		entry->delivery_mode = INT_DELIVERY_MODE;
+		entry->dest_mode = INT_DEST_MODE;
+		entry->dest = destination;
+	}
+
+	entry->mask = 0;				/* enable IRQ */
+	entry->trigger = trigger;
+	entry->polarity = polarity;
+	entry->vector = vector;
+
+	/* Mask level triggered irqs.
+	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+	 */
+	if (trigger)
+		entry->mask = 1;
+	return 0;
+}
+
+static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
+			      int trigger, int polarity)
+{
+	struct irq_cfg *cfg;
+	struct IO_APIC_route_entry entry;
+	cpumask_t mask;
+
+	if (!IO_APIC_IRQ(irq))
+		return;
+
+	cfg = irq_cfg(irq);
+
+	mask = TARGET_CPUS;
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cpus_and(mask, cfg->domain, mask);
+
+	apic_printk(APIC_VERBOSE,KERN_DEBUG
+		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
+		    "IRQ %d Mode:%i Active:%i)\n",
+		    apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
+		    irq, trigger, polarity);
+
+
+	if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry,
+			       cpu_mask_to_apicid(mask), trigger, polarity,
+			       cfg->vector)) {
+		printk("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
+		       mp_ioapics[apic].mp_apicid, pin);
+		__clear_irq_vector(irq);
+		return;
+	}
+
+	ioapic_register_intr(irq, trigger);
+	if (irq < 16)
+		disable_8259A_irq(irq);
+
+	ioapic_write_entry(apic, pin, entry);
+}
+
+static void __init setup_IO_APIC_irqs(void)
+{
+	int apic, pin, idx, irq;
+	int notcon = 0;
+
+	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+
+			idx = find_irq_entry(apic, pin, mp_INT);
+			if (idx == -1) {
+				if (!notcon) {
+					notcon = 1;
+					apic_printk(APIC_VERBOSE,
+						KERN_DEBUG " %d-%d",
+						mp_ioapics[apic].mp_apicid,
+						pin);
+				} else
+					apic_printk(APIC_VERBOSE, " %d-%d",
+						mp_ioapics[apic].mp_apicid,
+						pin);
+				continue;
+			}
+			if (notcon) {
+				apic_printk(APIC_VERBOSE,
+					" (apicid-pin) not connected\n");
+				notcon = 0;
+			}
+
+			irq = pin_2_irq(idx, apic, pin);
+#ifdef CONFIG_X86_32
+			if (multi_timer_check(apic, irq))
+				continue;
+#endif
+			add_pin_to_irq(irq, apic, pin);
+
+			setup_IO_APIC_irq(apic, pin, irq,
+					irq_trigger(idx), irq_polarity(idx));
+		}
+	}
+
+	if (notcon)
+		apic_printk(APIC_VERBOSE,
+			" (apicid-pin) not connected\n");
+}
+
+/*
+ * Set up the timer pin, possibly with the 8259A-master behind.
+ */
+static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
+					int vector)
+{
+	struct IO_APIC_route_entry entry;
+
+#ifdef CONFIG_INTR_REMAP
+	if (intr_remapping_enabled)
+		return;
+#endif
+
+	memset(&entry, 0, sizeof(entry));
+
+	/*
+	 * We use logical delivery to get the timer IRQ
+	 * to the first CPU.
+	 */
+	entry.dest_mode = INT_DEST_MODE;
+	entry.mask = 1;					/* mask IRQ now */
+	entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
+	entry.delivery_mode = INT_DELIVERY_MODE;
+	entry.polarity = 0;
+	entry.trigger = 0;
+	entry.vector = vector;
+
+	/*
+	 * The timer IRQ doesn't have to know that behind the
+	 * scene we may have a 8259A-master in AEOI mode ...
+	 */
+	set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
+
+	/*
+	 * Add it to the IO-APIC irq-routing table:
+	 */
+	ioapic_write_entry(apic, pin, entry);
+}
+
+
+__apicdebuginit(void) print_IO_APIC(void)
+{
+	int apic, i;
+	union IO_APIC_reg_00 reg_00;
+	union IO_APIC_reg_01 reg_01;
+	union IO_APIC_reg_02 reg_02;
+	union IO_APIC_reg_03 reg_03;
+	unsigned long flags;
+	struct irq_cfg *cfg;
+	unsigned int irq;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
+	for (i = 0; i < nr_ioapics; i++)
+		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
+		       mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
+
+	/*
+	 * We are a bit conservative about what we expect.  We have to
+	 * know about every hardware change ASAP.
+	 */
+	printk(KERN_INFO "testing the IO APIC.......................\n");
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_00.raw = io_apic_read(apic, 0);
+	reg_01.raw = io_apic_read(apic, 1);
+	if (reg_01.bits.version >= 0x10)
+		reg_02.raw = io_apic_read(apic, 2);
+	if (reg_01.bits.version >= 0x20)
+		reg_03.raw = io_apic_read(apic, 3);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	printk("\n");
+	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
+	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
+	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
+	printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
+	printk(KERN_DEBUG ".......    : LTS          : %X\n", reg_00.bits.LTS);
+
+	printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)&reg_01);
+	printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
+
+	printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
+	printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
+
+	/*
+	 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
+	 * but the value of reg_02 is read as the previous read register
+	 * value, so ignore it if reg_02 == reg_01.
+	 */
+	if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
+		printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
+		printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
+	}
+
+	/*
+	 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
+	 * or reg_03, but the value of reg_0[23] is read as the previous read
+	 * register value, so ignore it if reg_03 == reg_0[12].
+	 */
+	if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
+	    reg_03.raw != reg_01.raw) {
+		printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
+		printk(KERN_DEBUG ".......     : Boot DT    : %X\n", reg_03.bits.boot_DT);
+	}
+
+	printk(KERN_DEBUG ".... IRQ redirection table:\n");
+
+	printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
+			  " Stat Dmod Deli Vect:   \n");
+
+	for (i = 0; i <= reg_01.bits.entries; i++) {
+		struct IO_APIC_route_entry entry;
+
+		entry = ioapic_read_entry(apic, i);
+
+		printk(KERN_DEBUG " %02x %03X ",
+			i,
+			entry.dest
+		);
+
+		printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
+			entry.mask,
+			entry.trigger,
+			entry.irr,
+			entry.polarity,
+			entry.delivery_status,
+			entry.dest_mode,
+			entry.delivery_mode,
+			entry.vector
+		);
+	}
+	}
+	printk(KERN_DEBUG "IRQ to pin mappings:\n");
+	for_each_irq_cfg(irq, cfg) {
+		struct irq_pin_list *entry = cfg->irq_2_pin;
+		if (!entry)
+			continue;
+		printk(KERN_DEBUG "IRQ%d ", irq);
+		for (;;) {
+			printk("-> %d:%d", entry->apic, entry->pin);
+			if (!entry->next)
+				break;
+			entry = entry->next;
+		}
+		printk("\n");
+	}
+
+	printk(KERN_INFO ".................................... done.\n");
+
+	return;
+}
+
+__apicdebuginit(void) print_APIC_bitfield(int base)
+{
+	unsigned int v;
+	int i, j;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
+	for (i = 0; i < 8; i++) {
+		v = apic_read(base + i*0x10);
+		for (j = 0; j < 32; j++) {
+			if (v & (1<<j))
+				printk("1");
+			else
+				printk("0");
+		}
+		printk("\n");
+	}
+}
+
+__apicdebuginit(void) print_local_APIC(void *dummy)
+{
+	unsigned int v, ver, maxlvt;
+	u64 icr;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+		smp_processor_id(), hard_smp_processor_id());
+	v = apic_read(APIC_ID);
+	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, read_apic_id());
+	v = apic_read(APIC_LVR);
+	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
+	ver = GET_APIC_VERSION(v);
+	maxlvt = lapic_get_maxlvt();
+
+	v = apic_read(APIC_TASKPRI);
+	printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
+
+	if (APIC_INTEGRATED(ver)) {                     /* !82489DX */
+		if (!APIC_XAPIC(ver)) {
+			v = apic_read(APIC_ARBPRI);
+			printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
+			       v & APIC_ARBPRI_MASK);
+		}
+		v = apic_read(APIC_PROCPRI);
+		printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
+	}
+
+	/*
+	 * Remote read supported only in the 82489DX and local APIC for
+	 * Pentium processors.
+	 */
+	if (!APIC_INTEGRATED(ver) || maxlvt == 3) {
+		v = apic_read(APIC_RRR);
+		printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
+	}
+
+	v = apic_read(APIC_LDR);
+	printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
+	if (!x2apic_enabled()) {
+		v = apic_read(APIC_DFR);
+		printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
+	}
+	v = apic_read(APIC_SPIV);
+	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
+
+	printk(KERN_DEBUG "... APIC ISR field:\n");
+	print_APIC_bitfield(APIC_ISR);
+	printk(KERN_DEBUG "... APIC TMR field:\n");
+	print_APIC_bitfield(APIC_TMR);
+	printk(KERN_DEBUG "... APIC IRR field:\n");
+	print_APIC_bitfield(APIC_IRR);
+
+	if (APIC_INTEGRATED(ver)) {             /* !82489DX */
+		if (maxlvt > 3)         /* Due to the Pentium erratum 3AP. */
+			apic_write(APIC_ESR, 0);
+
+		v = apic_read(APIC_ESR);
+		printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
+	}
+
+	icr = apic_icr_read();
+	printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr);
+	printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32));
+
+	v = apic_read(APIC_LVTT);
+	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
+
+	if (maxlvt > 3) {                       /* PC is LVT#4. */
+		v = apic_read(APIC_LVTPC);
+		printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
+	}
+	v = apic_read(APIC_LVT0);
+	printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
+	v = apic_read(APIC_LVT1);
+	printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
+
+	if (maxlvt > 2) {			/* ERR is LVT#3. */
+		v = apic_read(APIC_LVTERR);
+		printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
+	}
+
+	v = apic_read(APIC_TMICT);
+	printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
+	v = apic_read(APIC_TMCCT);
+	printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
+	v = apic_read(APIC_TDCR);
+	printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
+	printk("\n");
+}
+
+__apicdebuginit(void) print_all_local_APICs(void)
+{
+	int cpu;
+
+	preempt_disable();
+	for_each_online_cpu(cpu)
+		smp_call_function_single(cpu, print_local_APIC, NULL, 1);
+	preempt_enable();
+}
+
+__apicdebuginit(void) print_PIC(void)
+{
+	unsigned int v;
+	unsigned long flags;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk(KERN_DEBUG "\nprinting PIC contents\n");
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	v = inb(0xa1) << 8 | inb(0x21);
+	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
+
+	v = inb(0xa0) << 8 | inb(0x20);
+	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
+
+	outb(0x0b,0xa0);
+	outb(0x0b,0x20);
+	v = inb(0xa0) << 8 | inb(0x20);
+	outb(0x0a,0xa0);
+	outb(0x0a,0x20);
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+
+	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
+
+	v = inb(0x4d1) << 8 | inb(0x4d0);
+	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
+}
+
+__apicdebuginit(int) print_all_ICs(void)
+{
+	print_PIC();
+	print_all_local_APICs();
+	print_IO_APIC();
+
+	return 0;
+}
+
+fs_initcall(print_all_ICs);
+
+
+/* Where if anywhere is the i8259 connect in external int mode */
+static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
+
+void __init enable_IO_APIC(void)
+{
+	union IO_APIC_reg_01 reg_01;
+	int i8259_apic, i8259_pin;
+	int apic;
+	unsigned long flags;
+
+#ifdef CONFIG_X86_32
+	int i;
+	if (!pirqs_enabled)
+		for (i = 0; i < MAX_PIRQS; i++)
+			pirq_entries[i] = -1;
+#endif
+
+	/*
+	 * The number of IO-APIC IRQ registers (== #pins):
+	 */
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_01.raw = io_apic_read(apic, 1);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+	}
+	for(apic = 0; apic < nr_ioapics; apic++) {
+		int pin;
+		/* See if any of the pins is in ExtINT mode */
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+			struct IO_APIC_route_entry entry;
+			entry = ioapic_read_entry(apic, pin);
+
+			/* If the interrupt line is enabled and in ExtInt mode
+			 * I have found the pin where the i8259 is connected.
+			 */
+			if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
+				ioapic_i8259.apic = apic;
+				ioapic_i8259.pin  = pin;
+				goto found_i8259;
+			}
+		}
+	}
+ found_i8259:
+	/* Look to see what if the MP table has reported the ExtINT */
+	/* If we could not find the appropriate pin by looking at the ioapic
+	 * the i8259 probably is not connected the ioapic but give the
+	 * mptable a chance anyway.
+	 */
+	i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
+	i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
+	/* Trust the MP table if nothing is setup in the hardware */
+	if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
+		printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
+		ioapic_i8259.pin  = i8259_pin;
+		ioapic_i8259.apic = i8259_apic;
+	}
+	/* Complain if the MP table and the hardware disagree */
+	if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
+		(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
+	{
+		printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
+	}
+
+	/*
+	 * Do not trust the IO-APIC being empty at bootup
+	 */
+	clear_IO_APIC();
+}
+
+/*
+ * Not an __init, needed by the reboot code
+ */
+void disable_IO_APIC(void)
+{
+	/*
+	 * Clear the IO-APIC before rebooting:
+	 */
+	clear_IO_APIC();
+
+	/*
+	 * If the i8259 is routed through an IOAPIC
+	 * Put that IOAPIC in virtual wire mode
+	 * so legacy interrupts can be delivered.
+	 */
+	if (ioapic_i8259.pin != -1) {
+		struct IO_APIC_route_entry entry;
+
+		memset(&entry, 0, sizeof(entry));
+		entry.mask            = 0; /* Enabled */
+		entry.trigger         = 0; /* Edge */
+		entry.irr             = 0;
+		entry.polarity        = 0; /* High */
+		entry.delivery_status = 0;
+		entry.dest_mode       = 0; /* Physical */
+		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
+		entry.vector          = 0;
+		entry.dest            = read_apic_id();
+
+		/*
+		 * Add it to the IO-APIC irq-routing table:
+		 */
+		ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
+	}
+
+	disconnect_bsp_APIC(ioapic_i8259.pin != -1);
+}
+
+#ifdef CONFIG_X86_32
+/*
+ * function to set the IO-APIC physical IDs based on the
+ * values stored in the MPC table.
+ *
+ * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
+ */
+
+static void __init setup_ioapic_ids_from_mpc(void)
+{
+	union IO_APIC_reg_00 reg_00;
+	physid_mask_t phys_id_present_map;
+	int apic;
+	int i;
+	unsigned char old_id;
+	unsigned long flags;
+
+	if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
+		return;
+
+	/*
+	 * Don't check I/O APIC IDs for xAPIC systems.  They have
+	 * no meaning without the serial APIC bus.
+	 */
+	if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+		|| APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		return;
+	/*
+	 * This is broken; anything with a real cpu count has to
+	 * circumvent this idiocy regardless.
+	 */
+	phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
+
+	/*
+	 * Set the IOAPIC ID to the value stored in the MPC table.
+	 */
+	for (apic = 0; apic < nr_ioapics; apic++) {
+
+		/* Read the register 0 value */
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_00.raw = io_apic_read(apic, 0);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+
+		old_id = mp_ioapics[apic].mp_apicid;
+
+		if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) {
+			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
+				apic, mp_ioapics[apic].mp_apicid);
+			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
+				reg_00.bits.ID);
+			mp_ioapics[apic].mp_apicid = reg_00.bits.ID;
+		}
+
+		/*
+		 * Sanity check, is the ID really free? Every APIC in a
+		 * system must have a unique ID or we get lots of nice
+		 * 'stuck on smp_invalidate_needed IPI wait' messages.
+		 */
+		if (check_apicid_used(phys_id_present_map,
+					mp_ioapics[apic].mp_apicid)) {
+			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
+				apic, mp_ioapics[apic].mp_apicid);
+			for (i = 0; i < get_physical_broadcast(); i++)
+				if (!physid_isset(i, phys_id_present_map))
+					break;
+			if (i >= get_physical_broadcast())
+				panic("Max APIC ID exceeded!\n");
+			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
+				i);
+			physid_set(i, phys_id_present_map);
+			mp_ioapics[apic].mp_apicid = i;
+		} else {
+			physid_mask_t tmp;
+			tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid);
+			apic_printk(APIC_VERBOSE, "Setting %d in the "
+					"phys_id_present_map\n",
+					mp_ioapics[apic].mp_apicid);
+			physids_or(phys_id_present_map, phys_id_present_map, tmp);
+		}
+
+
+		/*
+		 * We need to adjust the IRQ routing table
+		 * if the ID changed.
+		 */
+		if (old_id != mp_ioapics[apic].mp_apicid)
+			for (i = 0; i < mp_irq_entries; i++)
+				if (mp_irqs[i].mp_dstapic == old_id)
+					mp_irqs[i].mp_dstapic
+						= mp_ioapics[apic].mp_apicid;
+
+		/*
+		 * Read the right value from the MPC table and
+		 * write it into the ID register.
+		 */
+		apic_printk(APIC_VERBOSE, KERN_INFO
+			"...changing IO-APIC physical APIC ID to %d ...",
+			mp_ioapics[apic].mp_apicid);
+
+		reg_00.bits.ID = mp_ioapics[apic].mp_apicid;
+		spin_lock_irqsave(&ioapic_lock, flags);
+		io_apic_write(apic, 0, reg_00.raw);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+
+		/*
+		 * Sanity check
+		 */
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_00.raw = io_apic_read(apic, 0);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+		if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid)
+			printk("could not set ID!\n");
+		else
+			apic_printk(APIC_VERBOSE, " ok.\n");
+	}
+}
+#endif
+
+int no_timer_check __initdata;
+
+static int __init notimercheck(char *s)
+{
+	no_timer_check = 1;
+	return 1;
+}
+__setup("no_timer_check", notimercheck);
+
+/*
+ * There is a nasty bug in some older SMP boards, their mptable lies
+ * about the timer IRQ. We do the following to work around the situation:
+ *
+ *	- timer IRQ defaults to IO-APIC IRQ
+ *	- if this function detects that timer IRQs are defunct, then we fall
+ *	  back to ISA timer IRQs
+ */
+static int __init timer_irq_works(void)
+{
+	unsigned long t1 = jiffies;
+	unsigned long flags;
+
+	if (no_timer_check)
+		return 1;
+
+	local_save_flags(flags);
+	local_irq_enable();
+	/* Let ten ticks pass... */
+	mdelay((10 * 1000) / HZ);
+	local_irq_restore(flags);
+
+	/*
+	 * Expect a few ticks at least, to be sure some possible
+	 * glue logic does not lock up after one or two first
+	 * ticks in a non-ExtINT mode.  Also the local APIC
+	 * might have cached one ExtINT interrupt.  Finally, at
+	 * least one tick may be lost due to delays.
+	 */
+
+	/* jiffies wrap? */
+	if (time_after(jiffies, t1 + 4))
+		return 1;
+	return 0;
+}
+
+/*
+ * In the SMP+IOAPIC case it might happen that there are an unspecified
+ * number of pending IRQ events unhandled. These cases are very rare,
+ * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
+ * better to do it this way as thus we do not have to be aware of
+ * 'pending' interrupts in the IRQ path, except at this point.
+ */
+/*
+ * Edge triggered needs to resend any interrupt
+ * that was delayed but this is now handled in the device
+ * independent code.
+ */
+
+/*
+ * Starting up a edge-triggered IO-APIC interrupt is
+ * nasty - we need to make sure that we get the edge.
+ * If it is already asserted for some reason, we need
+ * return 1 to indicate that is was pending.
+ *
+ * This is not complete - we should be able to fake
+ * an edge even if it isn't on the 8259A...
+ */
+
+static unsigned int startup_ioapic_irq(unsigned int irq)
+{
+	int was_pending = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	if (irq < 16) {
+		disable_8259A_irq(irq);
+		if (i8259A_irq_pending(irq))
+			was_pending = 1;
+	}
+	__unmask_IO_APIC_irq(irq);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return was_pending;
+}
+
+#ifdef CONFIG_X86_64
+static int ioapic_retrigger_irq(unsigned int irq)
+{
+
+	struct irq_cfg *cfg = irq_cfg(irq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&vector_lock, flags);
+	send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector);
+	spin_unlock_irqrestore(&vector_lock, flags);
+
+	return 1;
+}
+#else
+static int ioapic_retrigger_irq(unsigned int irq)
+{
+	send_IPI_self(irq_cfg(irq)->vector);
+
+	return 1;
+}
+#endif
+
+/*
+ * Level and edge triggered IO-APIC interrupts need different handling,
+ * so we use two separate IRQ descriptors. Edge triggered IRQs can be
+ * handled with the level-triggered descriptor, but that one has slightly
+ * more overhead. Level-triggered interrupts cannot be handled with the
+ * edge-triggered handler, without risking IRQ storms and other ugly
+ * races.
+ */
+
+#ifdef CONFIG_SMP
+
+#ifdef CONFIG_INTR_REMAP
+static void ir_irq_migration(struct work_struct *work);
+
+static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
+
+/*
+ * Migrate the IO-APIC irq in the presence of intr-remapping.
+ *
+ * For edge triggered, irq migration is a simple atomic update(of vector
+ * and cpu destination) of IRTE and flush the hardware cache.
+ *
+ * For level triggered, we need to modify the io-apic RTE aswell with the update
+ * vector information, along with modifying IRTE with vector and destination.
+ * So irq migration for level triggered is little  bit more complex compared to
+ * edge triggered migration. But the good news is, we use the same algorithm
+ * for level triggered migration as we have today, only difference being,
+ * we now initiate the irq migration from process context instead of the
+ * interrupt context.
+ *
+ * In future, when we do a directed EOI (combined with cpu EOI broadcast
+ * suppression) to the IO-APIC, level triggered irq migration will also be
+ * as simple as edge triggered migration and we can do the irq migration
+ * with a simple atomic update to IO-APIC RTE.
+ */
+static void migrate_ioapic_irq(int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg;
+	struct irq_desc *desc;
+	cpumask_t tmp, cleanup_mask;
+	struct irte irte;
+	int modify_ioapic_rte;
+	unsigned int dest;
+	unsigned long flags;
+
+	cpus_and(tmp, mask, cpu_online_map);
+	if (cpus_empty(tmp))
+		return;
+
+	if (get_irte(irq, &irte))
+		return;
+
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cfg = irq_cfg(irq);
+	cpus_and(tmp, cfg->domain, mask);
+	dest = cpu_mask_to_apicid(tmp);
+
+	desc = irq_to_desc(irq);
+	modify_ioapic_rte = desc->status & IRQ_LEVEL;
+	if (modify_ioapic_rte) {
+		spin_lock_irqsave(&ioapic_lock, flags);
+		__target_IO_APIC_irq(irq, dest, cfg->vector);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+	}
+
+	irte.vector = cfg->vector;
+	irte.dest_id = IRTE_DEST(dest);
+
+	/*
+	 * Modified the IRTE and flushes the Interrupt entry cache.
+	 */
+	modify_irte(irq, &irte);
+
+	if (cfg->move_in_progress) {
+		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+		cfg->move_in_progress = 0;
+	}
+
+	desc->affinity = mask;
+}
+
+static int migrate_irq_remapped_level(int irq)
+{
+	int ret = -1;
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	mask_IO_APIC_irq(irq);
+
+	if (io_apic_level_ack_pending(irq)) {
+		/*
+		 * Interrupt in progress. Migrating irq now will change the
+		 * vector information in the IO-APIC RTE and that will confuse
+		 * the EOI broadcast performed by cpu.
+		 * So, delay the irq migration to the next instance.
+		 */
+		schedule_delayed_work(&ir_migration_work, 1);
+		goto unmask;
+	}
+
+	/* everthing is clear. we have right of way */
+	migrate_ioapic_irq(irq, desc->pending_mask);
+
+	ret = 0;
+	desc->status &= ~IRQ_MOVE_PENDING;
+	cpus_clear(desc->pending_mask);
+
+unmask:
+	unmask_IO_APIC_irq(irq);
+	return ret;
+}
+
+static void ir_irq_migration(struct work_struct *work)
+{
+	unsigned int irq;
+	struct irq_desc *desc;
+
+	for_each_irq_desc(irq, desc) {
+		if (desc->status & IRQ_MOVE_PENDING) {
+			unsigned long flags;
+
+			spin_lock_irqsave(&desc->lock, flags);
+			if (!desc->chip->set_affinity ||
+			    !(desc->status & IRQ_MOVE_PENDING)) {
+				desc->status &= ~IRQ_MOVE_PENDING;
+				spin_unlock_irqrestore(&desc->lock, flags);
+				continue;
+			}
+
+			desc->chip->set_affinity(irq, desc->pending_mask);
+			spin_unlock_irqrestore(&desc->lock, flags);
+		}
+	}
+}
+
+/*
+ * Migrates the IRQ destination in the process context.
+ */
+static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	if (desc->status & IRQ_LEVEL) {
+		desc->status |= IRQ_MOVE_PENDING;
+		desc->pending_mask = mask;
+		migrate_irq_remapped_level(irq);
+		return;
+	}
+
+	migrate_ioapic_irq(irq, mask);
+}
+#endif
+
+asmlinkage void smp_irq_move_cleanup_interrupt(void)
+{
+	unsigned vector, me;
+	ack_APIC_irq();
+#ifdef CONFIG_X86_64
+	exit_idle();
+#endif
+	irq_enter();
+
+	me = smp_processor_id();
+	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
+		unsigned int irq;
+		struct irq_desc *desc;
+		struct irq_cfg *cfg;
+		irq = __get_cpu_var(vector_irq)[vector];
+
+		desc = irq_to_desc(irq);
+		if (!desc)
+			continue;
+
+		cfg = irq_cfg(irq);
+		spin_lock(&desc->lock);
+		if (!cfg->move_cleanup_count)
+			goto unlock;
+
+		if ((vector == cfg->vector) && cpu_isset(me, cfg->domain))
+			goto unlock;
+
+		__get_cpu_var(vector_irq)[vector] = -1;
+		cfg->move_cleanup_count--;
+unlock:
+		spin_unlock(&desc->lock);
+	}
+
+	irq_exit();
+}
+
+static void irq_complete_move(unsigned int irq)
+{
+	struct irq_cfg *cfg = irq_cfg(irq);
+	unsigned vector, me;
+
+	if (likely(!cfg->move_in_progress))
+		return;
+
+	vector = ~get_irq_regs()->orig_ax;
+	me = smp_processor_id();
+	if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) {
+		cpumask_t cleanup_mask;
+
+		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+		cfg->move_in_progress = 0;
+	}
+}
+#else
+static inline void irq_complete_move(unsigned int irq) {}
+#endif
+#ifdef CONFIG_INTR_REMAP
+static void ack_x2apic_level(unsigned int irq)
+{
+	ack_x2APIC_irq();
+}
+
+static void ack_x2apic_edge(unsigned int irq)
+{
+	ack_x2APIC_irq();
+}
+#endif
+
+static void ack_apic_edge(unsigned int irq)
+{
+	irq_complete_move(irq);
+	move_native_irq(irq);
+	ack_APIC_irq();
+}
+
+atomic_t irq_mis_count;
+
+static void ack_apic_level(unsigned int irq)
+{
+#ifdef CONFIG_X86_32
+	unsigned long v;
+	int i;
+#endif
+	int do_unmask_irq = 0;
+
+	irq_complete_move(irq);
+#ifdef CONFIG_GENERIC_PENDING_IRQ
+	/* If we are moving the irq we need to mask it */
+	if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
+		do_unmask_irq = 1;
+		mask_IO_APIC_irq(irq);
+	}
+#endif
+
+#ifdef CONFIG_X86_32
+	/*
+	* It appears there is an erratum which affects at least version 0x11
+	* of I/O APIC (that's the 82093AA and cores integrated into various
+	* chipsets).  Under certain conditions a level-triggered interrupt is
+	* erroneously delivered as edge-triggered one but the respective IRR
+	* bit gets set nevertheless.  As a result the I/O unit expects an EOI
+	* message but it will never arrive and further interrupts are blocked
+	* from the source.  The exact reason is so far unknown, but the
+	* phenomenon was observed when two consecutive interrupt requests
+	* from a given source get delivered to the same CPU and the source is
+	* temporarily disabled in between.
+	*
+	* A workaround is to simulate an EOI message manually.  We achieve it
+	* by setting the trigger mode to edge and then to level when the edge
+	* trigger mode gets detected in the TMR of a local APIC for a
+	* level-triggered interrupt.  We mask the source for the time of the
+	* operation to prevent an edge-triggered interrupt escaping meanwhile.
+	* The idea is from Manfred Spraul.  --macro
+	*/
+	i = irq_cfg(irq)->vector;
+
+	v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
+#endif
+
+	/*
+	 * We must acknowledge the irq before we move it or the acknowledge will
+	 * not propagate properly.
+	 */
+	ack_APIC_irq();
+
+	/* Now we can move and renable the irq */
+	if (unlikely(do_unmask_irq)) {
+		/* Only migrate the irq if the ack has been received.
+		 *
+		 * On rare occasions the broadcast level triggered ack gets
+		 * delayed going to ioapics, and if we reprogram the
+		 * vector while Remote IRR is still set the irq will never
+		 * fire again.
+		 *
+		 * To prevent this scenario we read the Remote IRR bit
+		 * of the ioapic.  This has two effects.
+		 * - On any sane system the read of the ioapic will
+		 *   flush writes (and acks) going to the ioapic from
+		 *   this cpu.
+		 * - We get to see if the ACK has actually been delivered.
+		 *
+		 * Based on failed experiments of reprogramming the
+		 * ioapic entry from outside of irq context starting
+		 * with masking the ioapic entry and then polling until
+		 * Remote IRR was clear before reprogramming the
+		 * ioapic I don't trust the Remote IRR bit to be
+		 * completey accurate.
+		 *
+		 * However there appears to be no other way to plug
+		 * this race, so if the Remote IRR bit is not
+		 * accurate and is causing problems then it is a hardware bug
+		 * and you can go talk to the chipset vendor about it.
+		 */
+		if (!io_apic_level_ack_pending(irq))
+			move_masked_irq(irq);
+		unmask_IO_APIC_irq(irq);
+	}
+
+#ifdef CONFIG_X86_32
+	if (!(v & (1 << (i & 0x1f)))) {
+		atomic_inc(&irq_mis_count);
+		spin_lock(&ioapic_lock);
+		__mask_and_edge_IO_APIC_irq(irq);
+		__unmask_and_level_IO_APIC_irq(irq);
+		spin_unlock(&ioapic_lock);
+	}
+#endif
+}
+
+static struct irq_chip ioapic_chip __read_mostly = {
+	.name		= "IO-APIC",
+	.startup	= startup_ioapic_irq,
+	.mask		= mask_IO_APIC_irq,
+	.unmask		= unmask_IO_APIC_irq,
+	.ack		= ack_apic_edge,
+	.eoi		= ack_apic_level,
+#ifdef CONFIG_SMP
+	.set_affinity	= set_ioapic_affinity_irq,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip ir_ioapic_chip __read_mostly = {
+	.name		= "IR-IO-APIC",
+	.startup	= startup_ioapic_irq,
+	.mask		= mask_IO_APIC_irq,
+	.unmask		= unmask_IO_APIC_irq,
+	.ack		= ack_x2apic_edge,
+	.eoi		= ack_x2apic_level,
+#ifdef CONFIG_SMP
+	.set_affinity	= set_ir_ioapic_affinity_irq,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+#endif
+
+static inline void init_IO_APIC_traps(void)
+{
+	int irq;
+	struct irq_desc *desc;
+	struct irq_cfg *cfg;
+
+	/*
+	 * NOTE! The local APIC isn't very good at handling
+	 * multiple interrupts at the same interrupt level.
+	 * As the interrupt level is determined by taking the
+	 * vector number and shifting that right by 4, we
+	 * want to spread these out a bit so that they don't
+	 * all fall in the same interrupt level.
+	 *
+	 * Also, we've got to be careful not to trash gate
+	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
+	 */
+	for_each_irq_cfg(irq, cfg) {
+		if (IO_APIC_IRQ(irq) && !cfg->vector) {
+			/*
+			 * Hmm.. We don't have an entry for this,
+			 * so default to an old-fashioned 8259
+			 * interrupt if we can..
+			 */
+			if (irq < 16)
+				make_8259A_irq(irq);
+			else {
+				desc = irq_to_desc(irq);
+				/* Strange. Oh, well.. */
+				desc->chip = &no_irq_chip;
+			}
+		}
+	}
+}
+
+/*
+ * The local APIC irq-chip implementation:
+ */
+
+static void mask_lapic_irq(unsigned int irq)
+{
+	unsigned long v;
+
+	v = apic_read(APIC_LVT0);
+	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
+}
+
+static void unmask_lapic_irq(unsigned int irq)
+{
+	unsigned long v;
+
+	v = apic_read(APIC_LVT0);
+	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
+}
+
+static void ack_lapic_irq (unsigned int irq)
+{
+	ack_APIC_irq();
+}
+
+static struct irq_chip lapic_chip __read_mostly = {
+	.name		= "local-APIC",
+	.mask		= mask_lapic_irq,
+	.unmask		= unmask_lapic_irq,
+	.ack		= ack_lapic_irq,
+};
+
+static void lapic_register_intr(int irq)
+{
+	struct irq_desc *desc;
+
+	desc = irq_to_desc(irq);
+	desc->status &= ~IRQ_LEVEL;
+	set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
+				      "edge");
+}
+
+static void __init setup_nmi(void)
+{
+	/*
+	 * Dirty trick to enable the NMI watchdog ...
+	 * We put the 8259A master into AEOI mode and
+	 * unmask on all local APICs LVT0 as NMI.
+	 *
+	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
+	 * is from Maciej W. Rozycki - so we do not have to EOI from
+	 * the NMI handler or the timer interrupt.
+	 */
+	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
+
+	enable_NMI_through_LVT0();
+
+	apic_printk(APIC_VERBOSE, " done.\n");
+}
+
+/*
+ * This looks a bit hackish but it's about the only one way of sending
+ * a few INTA cycles to 8259As and any associated glue logic.  ICR does
+ * not support the ExtINT mode, unfortunately.  We need to send these
+ * cycles as some i82489DX-based boards have glue logic that keeps the
+ * 8259A interrupt line asserted until INTA.  --macro
+ */
+static inline void __init unlock_ExtINT_logic(void)
+{
+	int apic, pin, i;
+	struct IO_APIC_route_entry entry0, entry1;
+	unsigned char save_control, save_freq_select;
+
+	pin  = find_isa_irq_pin(8, mp_INT);
+	if (pin == -1) {
+		WARN_ON_ONCE(1);
+		return;
+	}
+	apic = find_isa_irq_apic(8, mp_INT);
+	if (apic == -1) {
+		WARN_ON_ONCE(1);
+		return;
+	}
+
+	entry0 = ioapic_read_entry(apic, pin);
+	clear_IO_APIC_pin(apic, pin);
+
+	memset(&entry1, 0, sizeof(entry1));
+
+	entry1.dest_mode = 0;			/* physical delivery */
+	entry1.mask = 0;			/* unmask IRQ now */
+	entry1.dest = hard_smp_processor_id();
+	entry1.delivery_mode = dest_ExtINT;
+	entry1.polarity = entry0.polarity;
+	entry1.trigger = 0;
+	entry1.vector = 0;
+
+	ioapic_write_entry(apic, pin, entry1);
+
+	save_control = CMOS_READ(RTC_CONTROL);
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+	CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
+		   RTC_FREQ_SELECT);
+	CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
+
+	i = 100;
+	while (i-- > 0) {
+		mdelay(10);
+		if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
+			i -= 10;
+	}
+
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+	clear_IO_APIC_pin(apic, pin);
+
+	ioapic_write_entry(apic, pin, entry0);
+}
+
+static int disable_timer_pin_1 __initdata;
+/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
+static int __init disable_timer_pin_setup(char *arg)
+{
+	disable_timer_pin_1 = 1;
+	return 0;
+}
+early_param("disable_timer_pin_1", disable_timer_pin_setup);
+
+int timer_through_8259 __initdata;
+
+/*
+ * This code may look a bit paranoid, but it's supposed to cooperate with
+ * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
+ * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
+ * fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for all platforms.
+ */
+static inline void __init check_timer(void)
+{
+	struct irq_cfg *cfg = irq_cfg(0);
+	int apic1, pin1, apic2, pin2;
+	unsigned long flags;
+	unsigned int ver;
+	int no_pin1 = 0;
+
+	local_irq_save(flags);
+
+	ver = apic_read(APIC_LVR);
+	ver = GET_APIC_VERSION(ver);
+
+	/*
+	 * get/set the timer IRQ vector:
+	 */
+	disable_8259A_irq(0);
+	assign_irq_vector(0, TARGET_CPUS);
+
+	/*
+	 * As IRQ0 is to be enabled in the 8259A, the virtual
+	 * wire has to be disabled in the local APIC.  Also
+	 * timer interrupts need to be acknowledged manually in
+	 * the 8259A for the i82489DX when using the NMI
+	 * watchdog as that APIC treats NMIs as level-triggered.
+	 * The AEOI mode will finish them in the 8259A
+	 * automatically.
+	 */
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+	init_8259A(1);
+#ifdef CONFIG_X86_32
+	timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
+#endif
+
+	pin1  = find_isa_irq_pin(0, mp_INT);
+	apic1 = find_isa_irq_apic(0, mp_INT);
+	pin2  = ioapic_i8259.pin;
+	apic2 = ioapic_i8259.apic;
+
+	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		    cfg->vector, apic1, pin1, apic2, pin2);
+
+	/*
+	 * Some BIOS writers are clueless and report the ExtINTA
+	 * I/O APIC input from the cascaded 8259A as the timer
+	 * interrupt input.  So just in case, if only one pin
+	 * was found above, try it both directly and through the
+	 * 8259A.
+	 */
+	if (pin1 == -1) {
+#ifdef CONFIG_INTR_REMAP
+		if (intr_remapping_enabled)
+			panic("BIOS bug: timer not connected to IO-APIC");
+#endif
+		pin1 = pin2;
+		apic1 = apic2;
+		no_pin1 = 1;
+	} else if (pin2 == -1) {
+		pin2 = pin1;
+		apic2 = apic1;
+	}
+
+	if (pin1 != -1) {
+		/*
+		 * Ok, does IRQ0 through the IOAPIC work?
+		 */
+		if (no_pin1) {
+			add_pin_to_irq(0, apic1, pin1);
+			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
+		}
+		unmask_IO_APIC_irq(0);
+		if (timer_irq_works()) {
+			if (nmi_watchdog == NMI_IO_APIC) {
+				setup_nmi();
+				enable_8259A_irq(0);
+			}
+			if (disable_timer_pin_1 > 0)
+				clear_IO_APIC_pin(0, pin1);
+			goto out;
+		}
+#ifdef CONFIG_INTR_REMAP
+		if (intr_remapping_enabled)
+			panic("timer doesn't work through Interrupt-remapped IO-APIC");
+#endif
+		clear_IO_APIC_pin(apic1, pin1);
+		if (!no_pin1)
+			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
+				    "8254 timer not connected to IO-APIC\n");
+
+		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+			    "(IRQ0) through the 8259A ...\n");
+		apic_printk(APIC_QUIET, KERN_INFO
+			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
+		/*
+		 * legacy devices should be connected to IO APIC #0
+		 */
+		replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
+		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
+		unmask_IO_APIC_irq(0);
+		enable_8259A_irq(0);
+		if (timer_irq_works()) {
+			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
+			timer_through_8259 = 1;
+			if (nmi_watchdog == NMI_IO_APIC) {
+				disable_8259A_irq(0);
+				setup_nmi();
+				enable_8259A_irq(0);
+			}
+			goto out;
+		}
+		/*
+		 * Cleanup, just in case ...
+		 */
+		disable_8259A_irq(0);
+		clear_IO_APIC_pin(apic2, pin2);
+		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
+	}
+
+	if (nmi_watchdog == NMI_IO_APIC) {
+		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+			    "through the IO-APIC - disabling NMI Watchdog!\n");
+		nmi_watchdog = NMI_NONE;
+	}
+#ifdef CONFIG_X86_32
+	timer_ack = 0;
+#endif
+
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as Virtual Wire IRQ...\n");
+
+	lapic_register_intr(0);
+	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
+	enable_8259A_irq(0);
+
+	if (timer_irq_works()) {
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
+		goto out;
+	}
+	disable_8259A_irq(0);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
+
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as ExtINT IRQ...\n");
+
+	init_8259A(0);
+	make_8259A_irq(0);
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
+
+	unlock_ExtINT_logic();
+
+	if (timer_irq_works()) {
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
+		goto out;
+	}
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
+	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
+		"report.  Then try booting with the 'noapic' option.\n");
+out:
+	local_irq_restore(flags);
+}
+
+/*
+ * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
+ * to devices.  However there may be an I/O APIC pin available for
+ * this interrupt regardless.  The pin may be left unconnected, but
+ * typically it will be reused as an ExtINT cascade interrupt for
+ * the master 8259A.  In the MPS case such a pin will normally be
+ * reported as an ExtINT interrupt in the MP table.  With ACPI
+ * there is no provision for ExtINT interrupts, and in the absence
+ * of an override it would be treated as an ordinary ISA I/O APIC
+ * interrupt, that is edge-triggered and unmasked by default.  We
+ * used to do this, but it caused problems on some systems because
+ * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
+ * the same ExtINT cascade interrupt to drive the local APIC of the
+ * bootstrap processor.  Therefore we refrain from routing IRQ2 to
+ * the I/O APIC in all cases now.  No actual device should request
+ * it anyway.  --macro
+ */
+#define PIC_IRQS	(1 << PIC_CASCADE_IR)
+
+void __init setup_IO_APIC(void)
+{
+
+#ifdef CONFIG_X86_32
+	enable_IO_APIC();
+#else
+	/*
+	 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
+	 */
+#endif
+
+	io_apic_irqs = ~PIC_IRQS;
+
+	apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
+	/*
+         * Set up IO-APIC IRQ routing.
+         */
+#ifdef CONFIG_X86_32
+	if (!acpi_ioapic)
+		setup_ioapic_ids_from_mpc();
+#endif
+	sync_Arb_IDs();
+	setup_IO_APIC_irqs();
+	init_IO_APIC_traps();
+	check_timer();
+}
+
+/*
+ *      Called after all the initialization is done. If we didnt find any
+ *      APIC bugs then we can allow the modify fast path
+ */
+
+static int __init io_apic_bug_finalize(void)
+{
+	if (sis_apic_bug == -1)
+		sis_apic_bug = 0;
+	return 0;
+}
+
+late_initcall(io_apic_bug_finalize);
+
+struct sysfs_ioapic_data {
+	struct sys_device dev;
+	struct IO_APIC_route_entry entry[0];
+};
+static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
+
+static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct IO_APIC_route_entry *entry;
+	struct sysfs_ioapic_data *data;
+	int i;
+
+	data = container_of(dev, struct sysfs_ioapic_data, dev);
+	entry = data->entry;
+	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
+		*entry = ioapic_read_entry(dev->id, i);
+
+	return 0;
+}
+
+static int ioapic_resume(struct sys_device *dev)
+{
+	struct IO_APIC_route_entry *entry;
+	struct sysfs_ioapic_data *data;
+	unsigned long flags;
+	union IO_APIC_reg_00 reg_00;
+	int i;
+
+	data = container_of(dev, struct sysfs_ioapic_data, dev);
+	entry = data->entry;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_00.raw = io_apic_read(dev->id, 0);
+	if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
+		reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
+		io_apic_write(dev->id, 0, reg_00.raw);
+	}
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
+		ioapic_write_entry(dev->id, i, entry[i]);
+
+	return 0;
+}
+
+static struct sysdev_class ioapic_sysdev_class = {
+	.name = "ioapic",
+	.suspend = ioapic_suspend,
+	.resume = ioapic_resume,
+};
+
+static int __init ioapic_init_sysfs(void)
+{
+	struct sys_device * dev;
+	int i, size, error;
+
+	error = sysdev_class_register(&ioapic_sysdev_class);
+	if (error)
+		return error;
+
+	for (i = 0; i < nr_ioapics; i++ ) {
+		size = sizeof(struct sys_device) + nr_ioapic_registers[i]
+			* sizeof(struct IO_APIC_route_entry);
+		mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
+		if (!mp_ioapic_data[i]) {
+			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
+			continue;
+		}
+		dev = &mp_ioapic_data[i]->dev;
+		dev->id = i;
+		dev->cls = &ioapic_sysdev_class;
+		error = sysdev_register(dev);
+		if (error) {
+			kfree(mp_ioapic_data[i]);
+			mp_ioapic_data[i] = NULL;
+			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+device_initcall(ioapic_init_sysfs);
+
+/*
+ * Dynamic irq allocate and deallocation
+ */
+unsigned int create_irq_nr(unsigned int irq_want)
+{
+	/* Allocate an unused irq */
+	unsigned int irq;
+	unsigned int new;
+	unsigned long flags;
+	struct irq_cfg *cfg_new;
+
+	irq_want = nr_irqs - 1;
+
+	irq = 0;
+	spin_lock_irqsave(&vector_lock, flags);
+	for (new = irq_want; new > 0; new--) {
+		if (platform_legacy_irq(new))
+			continue;
+		cfg_new = irq_cfg(new);
+		if (cfg_new && cfg_new->vector != 0)
+			continue;
+		/* check if need to create one */
+		if (!cfg_new)
+			cfg_new = irq_cfg_alloc(new);
+		if (__assign_irq_vector(new, TARGET_CPUS) == 0)
+			irq = new;
+		break;
+	}
+	spin_unlock_irqrestore(&vector_lock, flags);
+
+	if (irq > 0) {
+		dynamic_irq_init(irq);
+	}
+	return irq;
+}
+
+int create_irq(void)
+{
+	int irq;
+
+	irq = create_irq_nr(nr_irqs - 1);
+
+	if (irq == 0)
+		irq = -1;
+
+	return irq;
+}
+
+void destroy_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	dynamic_irq_cleanup(irq);
+
+#ifdef CONFIG_INTR_REMAP
+	free_irte(irq);
+#endif
+	spin_lock_irqsave(&vector_lock, flags);
+	__clear_irq_vector(irq);
+	spin_unlock_irqrestore(&vector_lock, flags);
+}
+
+/*
+ * MSI message composition
+ */
+#ifdef CONFIG_PCI_MSI
+static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
+{
+	struct irq_cfg *cfg;
+	int err;
+	unsigned dest;
+	cpumask_t tmp;
+
+	tmp = TARGET_CPUS;
+	err = assign_irq_vector(irq, tmp);
+	if (err)
+		return err;
+
+	cfg = irq_cfg(irq);
+	cpus_and(tmp, cfg->domain, tmp);
+	dest = cpu_mask_to_apicid(tmp);
+
+#ifdef CONFIG_INTR_REMAP
+	if (irq_remapped(irq)) {
+		struct irte irte;
+		int ir_index;
+		u16 sub_handle;
+
+		ir_index = map_irq_to_irte_handle(irq, &sub_handle);
+		BUG_ON(ir_index == -1);
+
+		memset (&irte, 0, sizeof(irte));
+
+		irte.present = 1;
+		irte.dst_mode = INT_DEST_MODE;
+		irte.trigger_mode = 0; /* edge */
+		irte.dlvry_mode = INT_DELIVERY_MODE;
+		irte.vector = cfg->vector;
+		irte.dest_id = IRTE_DEST(dest);
+
+		modify_irte(irq, &irte);
+
+		msg->address_hi = MSI_ADDR_BASE_HI;
+		msg->data = sub_handle;
+		msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
+				  MSI_ADDR_IR_SHV |
+				  MSI_ADDR_IR_INDEX1(ir_index) |
+				  MSI_ADDR_IR_INDEX2(ir_index);
+	} else
+#endif
+	{
+		msg->address_hi = MSI_ADDR_BASE_HI;
+		msg->address_lo =
+			MSI_ADDR_BASE_LO |
+			((INT_DEST_MODE == 0) ?
+				MSI_ADDR_DEST_MODE_PHYSICAL:
+				MSI_ADDR_DEST_MODE_LOGICAL) |
+			((INT_DELIVERY_MODE != dest_LowestPrio) ?
+				MSI_ADDR_REDIRECTION_CPU:
+				MSI_ADDR_REDIRECTION_LOWPRI) |
+			MSI_ADDR_DEST_ID(dest);
+
+		msg->data =
+			MSI_DATA_TRIGGER_EDGE |
+			MSI_DATA_LEVEL_ASSERT |
+			((INT_DELIVERY_MODE != dest_LowestPrio) ?
+				MSI_DATA_DELIVERY_FIXED:
+				MSI_DATA_DELIVERY_LOWPRI) |
+			MSI_DATA_VECTOR(cfg->vector);
+	}
+	return err;
+}
+
+#ifdef CONFIG_SMP
+static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg;
+	struct msi_msg msg;
+	unsigned int dest;
+	cpumask_t tmp;
+	struct irq_desc *desc;
+
+	cpus_and(tmp, mask, cpu_online_map);
+	if (cpus_empty(tmp))
+		return;
+
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cfg = irq_cfg(irq);
+	cpus_and(tmp, cfg->domain, mask);
+	dest = cpu_mask_to_apicid(tmp);
+
+	read_msi_msg(irq, &msg);
+
+	msg.data &= ~MSI_DATA_VECTOR_MASK;
+	msg.data |= MSI_DATA_VECTOR(cfg->vector);
+	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
+	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+
+	write_msi_msg(irq, &msg);
+	desc = irq_to_desc(irq);
+	desc->affinity = mask;
+}
+
+#ifdef CONFIG_INTR_REMAP
+/*
+ * Migrate the MSI irq to another cpumask. This migration is
+ * done in the process context using interrupt-remapping hardware.
+ */
+static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg;
+	unsigned int dest;
+	cpumask_t tmp, cleanup_mask;
+	struct irte irte;
+	struct irq_desc *desc;
+
+	cpus_and(tmp, mask, cpu_online_map);
+	if (cpus_empty(tmp))
+		return;
+
+	if (get_irte(irq, &irte))
+		return;
+
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cfg = irq_cfg(irq);
+	cpus_and(tmp, cfg->domain, mask);
+	dest = cpu_mask_to_apicid(tmp);
+
+	irte.vector = cfg->vector;
+	irte.dest_id = IRTE_DEST(dest);
+
+	/*
+	 * atomically update the IRTE with the new destination and vector.
+	 */
+	modify_irte(irq, &irte);
+
+	/*
+	 * After this point, all the interrupts will start arriving
+	 * at the new destination. So, time to cleanup the previous
+	 * vector allocation.
+	 */
+	if (cfg->move_in_progress) {
+		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+		cfg->move_in_progress = 0;
+	}
+
+	desc = irq_to_desc(irq);
+	desc->affinity = mask;
+}
+#endif
+#endif /* CONFIG_SMP */
+
+/*
+ * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
+ * which implement the MSI or MSI-X Capability Structure.
+ */
+static struct irq_chip msi_chip = {
+	.name		= "PCI-MSI",
+	.unmask		= unmask_msi_irq,
+	.mask		= mask_msi_irq,
+	.ack		= ack_apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity	= set_msi_irq_affinity,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip msi_ir_chip = {
+	.name		= "IR-PCI-MSI",
+	.unmask		= unmask_msi_irq,
+	.mask		= mask_msi_irq,
+	.ack		= ack_x2apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity	= ir_set_msi_irq_affinity,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+
+/*
+ * Map the PCI dev to the corresponding remapping hardware unit
+ * and allocate 'nvec' consecutive interrupt-remapping table entries
+ * in it.
+ */
+static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
+{
+	struct intel_iommu *iommu;
+	int index;
+
+	iommu = map_dev_to_ir(dev);
+	if (!iommu) {
+		printk(KERN_ERR
+		       "Unable to map PCI %s to iommu\n", pci_name(dev));
+		return -ENOENT;
+	}
+
+	index = alloc_irte(iommu, irq, nvec);
+	if (index < 0) {
+		printk(KERN_ERR
+		       "Unable to allocate %d IRTE for PCI %s\n", nvec,
+		       pci_name(dev));
+		return -ENOSPC;
+	}
+	return index;
+}
+#endif
+
+static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc, int irq)
+{
+	int ret;
+	struct msi_msg msg;
+
+	ret = msi_compose_msg(dev, irq, &msg);
+	if (ret < 0)
+		return ret;
+
+	set_irq_msi(irq, desc);
+	write_msi_msg(irq, &msg);
+
+#ifdef CONFIG_INTR_REMAP
+	if (irq_remapped(irq)) {
+		struct irq_desc *desc = irq_to_desc(irq);
+		/*
+		 * irq migration in process context
+		 */
+		desc->status |= IRQ_MOVE_PCNTXT;
+		set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
+	} else
+#endif
+		set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
+
+	dev_printk(KERN_DEBUG, &dev->dev, "irq %d for MSI/MSI-X\n", irq);
+
+	return 0;
+}
+
+static unsigned int build_irq_for_pci_dev(struct pci_dev *dev)
+{
+	unsigned int irq;
+
+	irq = dev->bus->number;
+	irq <<= 8;
+	irq |= dev->devfn;
+	irq <<= 12;
+
+	return irq;
+}
+
+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+{
+	unsigned int irq;
+	int ret;
+	unsigned int irq_want;
+
+	irq_want = build_irq_for_pci_dev(dev) + 0x100;
+
+	irq = create_irq_nr(irq_want);
+	if (irq == 0)
+		return -1;
+
+#ifdef CONFIG_INTR_REMAP
+	if (!intr_remapping_enabled)
+		goto no_ir;
+
+	ret = msi_alloc_irte(dev, irq, 1);
+	if (ret < 0)
+		goto error;
+no_ir:
+#endif
+	ret = setup_msi_irq(dev, desc, irq);
+	if (ret < 0) {
+		destroy_irq(irq);
+		return ret;
+	}
+	return 0;
+
+#ifdef CONFIG_INTR_REMAP
+error:
+	destroy_irq(irq);
+	return ret;
+#endif
+}
+
+int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	unsigned int irq;
+	int ret, sub_handle;
+	struct msi_desc *desc;
+	unsigned int irq_want;
+
+#ifdef CONFIG_INTR_REMAP
+	struct intel_iommu *iommu = 0;
+	int index = 0;
+#endif
+
+	irq_want = build_irq_for_pci_dev(dev) + 0x100;
+	sub_handle = 0;
+	list_for_each_entry(desc, &dev->msi_list, list) {
+		irq = create_irq_nr(irq_want--);
+		if (irq == 0)
+			return -1;
+#ifdef CONFIG_INTR_REMAP
+		if (!intr_remapping_enabled)
+			goto no_ir;
+
+		if (!sub_handle) {
+			/*
+			 * allocate the consecutive block of IRTE's
+			 * for 'nvec'
+			 */
+			index = msi_alloc_irte(dev, irq, nvec);
+			if (index < 0) {
+				ret = index;
+				goto error;
+			}
+		} else {
+			iommu = map_dev_to_ir(dev);
+			if (!iommu) {
+				ret = -ENOENT;
+				goto error;
+			}
+			/*
+			 * setup the mapping between the irq and the IRTE
+			 * base index, the sub_handle pointing to the
+			 * appropriate interrupt remap table entry.
+			 */
+			set_irte_irq(irq, iommu, index, sub_handle);
+		}
+no_ir:
+#endif
+		ret = setup_msi_irq(dev, desc, irq);
+		if (ret < 0)
+			goto error;
+		sub_handle++;
+	}
+	return 0;
+
+error:
+	destroy_irq(irq);
+	return ret;
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+	destroy_irq(irq);
+}
+
+#ifdef CONFIG_DMAR
+#ifdef CONFIG_SMP
+static void dmar_msi_set_affinity(unsigned int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg;
+	struct msi_msg msg;
+	unsigned int dest;
+	cpumask_t tmp;
+	struct irq_desc *desc;
+
+	cpus_and(tmp, mask, cpu_online_map);
+	if (cpus_empty(tmp))
+		return;
+
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cfg = irq_cfg(irq);
+	cpus_and(tmp, cfg->domain, mask);
+	dest = cpu_mask_to_apicid(tmp);
+
+	dmar_msi_read(irq, &msg);
+
+	msg.data &= ~MSI_DATA_VECTOR_MASK;
+	msg.data |= MSI_DATA_VECTOR(cfg->vector);
+	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
+	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+
+	dmar_msi_write(irq, &msg);
+	desc = irq_to_desc(irq);
+	desc->affinity = mask;
+}
+#endif /* CONFIG_SMP */
+
+struct irq_chip dmar_msi_type = {
+	.name = "DMAR_MSI",
+	.unmask = dmar_msi_unmask,
+	.mask = dmar_msi_mask,
+	.ack = ack_apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity = dmar_msi_set_affinity,
+#endif
+	.retrigger = ioapic_retrigger_irq,
+};
+
+int arch_setup_dmar_msi(unsigned int irq)
+{
+	int ret;
+	struct msi_msg msg;
+
+	ret = msi_compose_msg(NULL, irq, &msg);
+	if (ret < 0)
+		return ret;
+	dmar_msi_write(irq, &msg);
+	set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
+		"edge");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_HPET_TIMER
+
+#ifdef CONFIG_SMP
+static void hpet_msi_set_affinity(unsigned int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg;
+	struct irq_desc *desc;
+	struct msi_msg msg;
+	unsigned int dest;
+	cpumask_t tmp;
+
+	cpus_and(tmp, mask, cpu_online_map);
+	if (cpus_empty(tmp))
+		return;
+
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cfg = irq_cfg(irq);
+	cpus_and(tmp, cfg->domain, mask);
+	dest = cpu_mask_to_apicid(tmp);
+
+	hpet_msi_read(irq, &msg);
+
+	msg.data &= ~MSI_DATA_VECTOR_MASK;
+	msg.data |= MSI_DATA_VECTOR(cfg->vector);
+	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
+	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+
+	hpet_msi_write(irq, &msg);
+	desc = irq_to_desc(irq);
+	desc->affinity = mask;
+}
+#endif /* CONFIG_SMP */
+
+struct irq_chip hpet_msi_type = {
+	.name = "HPET_MSI",
+	.unmask = hpet_msi_unmask,
+	.mask = hpet_msi_mask,
+	.ack = ack_apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity = hpet_msi_set_affinity,
+#endif
+	.retrigger = ioapic_retrigger_irq,
+};
+
+int arch_setup_hpet_msi(unsigned int irq)
+{
+	int ret;
+	struct msi_msg msg;
+
+	ret = msi_compose_msg(NULL, irq, &msg);
+	if (ret < 0)
+		return ret;
+
+	hpet_msi_write(irq, &msg);
+	set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
+		"edge");
+
+	return 0;
+}
+#endif
+
+#endif /* CONFIG_PCI_MSI */
+/*
+ * Hypertransport interrupt support
+ */
+#ifdef CONFIG_HT_IRQ
+
+#ifdef CONFIG_SMP
+
+static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
+{
+	struct ht_irq_msg msg;
+	fetch_ht_irq_msg(irq, &msg);
+
+	msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
+	msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
+
+	msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
+	msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
+
+	write_ht_irq_msg(irq, &msg);
+}
+
+static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg;
+	unsigned int dest;
+	cpumask_t tmp;
+	struct irq_desc *desc;
+
+	cpus_and(tmp, mask, cpu_online_map);
+	if (cpus_empty(tmp))
+		return;
+
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cfg = irq_cfg(irq);
+	cpus_and(tmp, cfg->domain, mask);
+	dest = cpu_mask_to_apicid(tmp);
+
+	target_ht_irq(irq, dest, cfg->vector);
+	desc = irq_to_desc(irq);
+	desc->affinity = mask;
+}
+#endif
+
+static struct irq_chip ht_irq_chip = {
+	.name		= "PCI-HT",
+	.mask		= mask_ht_irq,
+	.unmask		= unmask_ht_irq,
+	.ack		= ack_apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity	= set_ht_irq_affinity,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+
+int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
+{
+	struct irq_cfg *cfg;
+	int err;
+	cpumask_t tmp;
+
+	tmp = TARGET_CPUS;
+	err = assign_irq_vector(irq, tmp);
+	if (!err) {
+		struct ht_irq_msg msg;
+		unsigned dest;
+
+		cfg = irq_cfg(irq);
+		cpus_and(tmp, cfg->domain, tmp);
+		dest = cpu_mask_to_apicid(tmp);
+
+		msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
+
+		msg.address_lo =
+			HT_IRQ_LOW_BASE |
+			HT_IRQ_LOW_DEST_ID(dest) |
+			HT_IRQ_LOW_VECTOR(cfg->vector) |
+			((INT_DEST_MODE == 0) ?
+				HT_IRQ_LOW_DM_PHYSICAL :
+				HT_IRQ_LOW_DM_LOGICAL) |
+			HT_IRQ_LOW_RQEOI_EDGE |
+			((INT_DELIVERY_MODE != dest_LowestPrio) ?
+				HT_IRQ_LOW_MT_FIXED :
+				HT_IRQ_LOW_MT_ARBITRATED) |
+			HT_IRQ_LOW_IRQ_MASKED;
+
+		write_ht_irq_msg(irq, &msg);
+
+		set_irq_chip_and_handler_name(irq, &ht_irq_chip,
+					      handle_edge_irq, "edge");
+
+		dev_printk(KERN_DEBUG, &dev->dev, "irq %d for HT\n", irq);
+	}
+	return err;
+}
+#endif /* CONFIG_HT_IRQ */
+
+#ifdef CONFIG_X86_64
+/*
+ * Re-target the irq to the specified CPU and enable the specified MMR located
+ * on the specified blade to allow the sending of MSIs to the specified CPU.
+ */
+int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
+		       unsigned long mmr_offset)
+{
+	const cpumask_t *eligible_cpu = get_cpu_mask(cpu);
+	struct irq_cfg *cfg;
+	int mmr_pnode;
+	unsigned long mmr_value;
+	struct uv_IO_APIC_route_entry *entry;
+	unsigned long flags;
+	int err;
+
+	err = assign_irq_vector(irq, *eligible_cpu);
+	if (err != 0)
+		return err;
+
+	spin_lock_irqsave(&vector_lock, flags);
+	set_irq_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq,
+				      irq_name);
+	spin_unlock_irqrestore(&vector_lock, flags);
+
+	cfg = irq_cfg(irq);
+
+	mmr_value = 0;
+	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+	BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
+
+	entry->vector = cfg->vector;
+	entry->delivery_mode = INT_DELIVERY_MODE;
+	entry->dest_mode = INT_DEST_MODE;
+	entry->polarity = 0;
+	entry->trigger = 0;
+	entry->mask = 0;
+	entry->dest = cpu_mask_to_apicid(*eligible_cpu);
+
+	mmr_pnode = uv_blade_to_pnode(mmr_blade);
+	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+
+	return irq;
+}
+
+/*
+ * Disable the specified MMR located on the specified blade so that MSIs are
+ * longer allowed to be sent.
+ */
+void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset)
+{
+	unsigned long mmr_value;
+	struct uv_IO_APIC_route_entry *entry;
+	int mmr_pnode;
+
+	mmr_value = 0;
+	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+	BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
+
+	entry->mask = 1;
+
+	mmr_pnode = uv_blade_to_pnode(mmr_blade);
+	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+}
+#endif /* CONFIG_X86_64 */
+
+int __init io_apic_get_redir_entries (int ioapic)
+{
+	union IO_APIC_reg_01	reg_01;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_01.raw = io_apic_read(ioapic, 1);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return reg_01.bits.entries;
+}
+
+int __init probe_nr_irqs(void)
+{
+	int idx;
+	int nr = 0;
+#ifndef CONFIG_XEN
+	int nr_min = 32;
+#else
+	int nr_min = NR_IRQS;
+#endif
+
+	for (idx = 0; idx < nr_ioapics; idx++)
+		nr += io_apic_get_redir_entries(idx) + 1;
+
+	/* double it for hotplug and msi and nmi */
+	nr <<= 1;
+
+	/* something wrong ? */
+	if (nr < nr_min)
+		nr = nr_min;
+
+	return nr;
+}
+
+/* --------------------------------------------------------------------------
+                          ACPI-based IOAPIC Configuration
+   -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI
+
+#ifdef CONFIG_X86_32
+int __init io_apic_get_unique_id(int ioapic, int apic_id)
+{
+	union IO_APIC_reg_00 reg_00;
+	static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
+	physid_mask_t tmp;
+	unsigned long flags;
+	int i = 0;
+
+	/*
+	 * The P4 platform supports up to 256 APIC IDs on two separate APIC
+	 * buses (one for LAPICs, one for IOAPICs), where predecessors only
+	 * supports up to 16 on one shared APIC bus.
+	 *
+	 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
+	 *      advantage of new APIC bus architecture.
+	 */
+
+	if (physids_empty(apic_id_map))
+		apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_00.raw = io_apic_read(ioapic, 0);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	if (apic_id >= get_physical_broadcast()) {
+		printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
+			"%d\n", ioapic, apic_id, reg_00.bits.ID);
+		apic_id = reg_00.bits.ID;
+	}
+
+	/*
+	 * Every APIC in a system must have a unique ID or we get lots of nice
+	 * 'stuck on smp_invalidate_needed IPI wait' messages.
+	 */
+	if (check_apicid_used(apic_id_map, apic_id)) {
+
+		for (i = 0; i < get_physical_broadcast(); i++) {
+			if (!check_apicid_used(apic_id_map, i))
+				break;
+		}
+
+		if (i == get_physical_broadcast())
+			panic("Max apic_id exceeded!\n");
+
+		printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
+			"trying %d\n", ioapic, apic_id, i);
+
+		apic_id = i;
+	}
+
+	tmp = apicid_to_cpu_present(apic_id);
+	physids_or(apic_id_map, apic_id_map, tmp);
+
+	if (reg_00.bits.ID != apic_id) {
+		reg_00.bits.ID = apic_id;
+
+		spin_lock_irqsave(&ioapic_lock, flags);
+		io_apic_write(ioapic, 0, reg_00.raw);
+		reg_00.raw = io_apic_read(ioapic, 0);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+
+		/* Sanity check */
+		if (reg_00.bits.ID != apic_id) {
+			printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+			return -1;
+		}
+	}
+
+	apic_printk(APIC_VERBOSE, KERN_INFO
+			"IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
+
+	return apic_id;
+}
+
+int __init io_apic_get_version(int ioapic)
+{
+	union IO_APIC_reg_01	reg_01;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_01.raw = io_apic_read(ioapic, 1);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return reg_01.bits.version;
+}
+#endif
+
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
+{
+	if (!IO_APIC_IRQ(irq)) {
+		apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+			ioapic);
+		return -EINVAL;
+	}
+
+	/*
+	 * IRQs < 16 are already in the irq_2_pin[] map
+	 */
+	if (irq >= 16)
+		add_pin_to_irq(irq, ioapic, pin);
+
+	setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity);
+
+	return 0;
+}
+
+
+int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
+{
+	int i;
+
+	if (skip_ioapic_setup)
+		return -1;
+
+	for (i = 0; i < mp_irq_entries; i++)
+		if (mp_irqs[i].mp_irqtype == mp_INT &&
+		    mp_irqs[i].mp_srcbusirq == bus_irq)
+			break;
+	if (i >= mp_irq_entries)
+		return -1;
+
+	*trigger = irq_trigger(i);
+	*polarity = irq_polarity(i);
+	return 0;
+}
+
+#endif /* CONFIG_ACPI */
+
+/*
+ * This function currently is only a helper for the i386 smp boot process where
+ * we need to reprogram the ioredtbls to cater for the cpus which have come online
+ * so mask in all cases should simply be TARGET_CPUS
+ */
+#ifdef CONFIG_SMP
+void __init setup_ioapic_dest(void)
+{
+	int pin, ioapic, irq, irq_entry;
+	struct irq_cfg *cfg;
+
+	if (skip_ioapic_setup == 1)
+		return;
+
+	for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
+		for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+			irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+			if (irq_entry == -1)
+				continue;
+			irq = pin_2_irq(irq_entry, ioapic, pin);
+
+			/* setup_IO_APIC_irqs could fail to get vector for some device
+			 * when you have too many devices, because at that time only boot
+			 * cpu is online.
+			 */
+			cfg = irq_cfg(irq);
+			if (!cfg->vector)
+				setup_IO_APIC_irq(ioapic, pin, irq,
+						  irq_trigger(irq_entry),
+						  irq_polarity(irq_entry));
+#ifdef CONFIG_INTR_REMAP
+			else if (intr_remapping_enabled)
+				set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
+#endif
+			else
+				set_ioapic_affinity_irq(irq, TARGET_CPUS);
+		}
+
+	}
+}
+#endif
+
+#define IOAPIC_RESOURCE_NAME_SIZE 11
+
+static struct resource *ioapic_resources;
+
+static struct resource * __init ioapic_setup_resources(void)
+{
+	unsigned long n;
+	struct resource *res;
+	char *mem;
+	int i;
+
+	if (nr_ioapics <= 0)
+		return NULL;
+
+	n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource);
+	n *= nr_ioapics;
+
+	mem = alloc_bootmem(n);
+	res = (void *)mem;
+
+	if (mem != NULL) {
+		mem += sizeof(struct resource) * nr_ioapics;
+
+		for (i = 0; i < nr_ioapics; i++) {
+			res[i].name = mem;
+			res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+			sprintf(mem,  "IOAPIC %u", i);
+			mem += IOAPIC_RESOURCE_NAME_SIZE;
+		}
+	}
+
+	ioapic_resources = res;
+
+	return res;
+}
+
+void __init ioapic_init_mappings(void)
+{
+	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
+	struct resource *ioapic_res;
+	int i;
+
+	irq_2_pin_init();
+	ioapic_res = ioapic_setup_resources();
+	for (i = 0; i < nr_ioapics; i++) {
+		if (smp_found_config) {
+			ioapic_phys = mp_ioapics[i].mp_apicaddr;
+#ifdef CONFIG_X86_32
+			if (!ioapic_phys) {
+				printk(KERN_ERR
+				       "WARNING: bogus zero IO-APIC "
+				       "address found in MPTABLE, "
+				       "disabling IO/APIC support!\n");
+				smp_found_config = 0;
+				skip_ioapic_setup = 1;
+				goto fake_ioapic_page;
+			}
+#endif
+		} else {
+#ifdef CONFIG_X86_32
+fake_ioapic_page:
+#endif
+			ioapic_phys = (unsigned long)
+				alloc_bootmem_pages(PAGE_SIZE);
+			ioapic_phys = __pa(ioapic_phys);
+		}
+		set_fixmap_nocache(idx, ioapic_phys);
+		apic_printk(APIC_VERBOSE,
+			    "mapped IOAPIC to %08lx (%08lx)\n",
+			    __fix_to_virt(idx), ioapic_phys);
+		idx++;
+
+		if (ioapic_res != NULL) {
+			ioapic_res->start = ioapic_phys;
+			ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+			ioapic_res++;
+		}
+	}
+}
+
+static int __init ioapic_insert_resources(void)
+{
+	int i;
+	struct resource *r = ioapic_resources;
+
+	if (!r) {
+		printk(KERN_ERR
+		       "IO APIC resources could be not be allocated.\n");
+		return -1;
+	}
+
+	for (i = 0; i < nr_ioapics; i++) {
+		insert_resource(&iomem_resource, r);
+		r++;
+	}
+
+	return 0;
+}
+
+/* Insert the IO APIC resources after PCI initialization has occured to handle
+ * IO APICS that are mapped in on a BAR in PCI space. */
+late_initcall(ioapic_insert_resources);
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
deleted file mode 100644
index 09cddb5..0000000
--- a/arch/x86/kernel/io_apic_32.c
+++ /dev/null
@@ -1,2901 +0,0 @@
-/*
- *	Intel IO-APIC support for multi-Pentium hosts.
- *
- *	Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
- *
- *	Many thanks to Stig Venaas for trying out countless experimental
- *	patches and reporting/debugging problems patiently!
- *
- *	(c) 1999, Multiple IO-APIC support, developed by
- *	Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
- *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
- *	further tested and cleaned up by Zach Brown <zab@redhat.com>
- *	and Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
- *					thanks to Eric Gilmore
- *					and Rolf G. Tews
- *					for testing these extensively
- *	Paul Diefenbaugh	:	Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/mc146818rtc.h>
-#include <linux/compiler.h>
-#include <linux/acpi.h>
-#include <linux/module.h>
-#include <linux/sysdev.h>
-#include <linux/pci.h>
-#include <linux/msi.h>
-#include <linux/htirq.h>
-#include <linux/freezer.h>
-#include <linux/kthread.h>
-#include <linux/jiffies.h>	/* time_after() */
-
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/desc.h>
-#include <asm/timer.h>
-#include <asm/i8259.h>
-#include <asm/nmi.h>
-#include <asm/msidef.h>
-#include <asm/hypertransport.h>
-
-#include <mach_apic.h>
-#include <mach_apicdef.h>
-
-int (*ioapic_renumber_irq)(int ioapic, int irq);
-atomic_t irq_mis_count;
-
-/* Where if anywhere is the i8259 connect in external int mode */
-static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
-
-static DEFINE_SPINLOCK(ioapic_lock);
-DEFINE_SPINLOCK(vector_lock);
-
-int timer_through_8259 __initdata;
-
-/*
- *	Is the SiS APIC rmw bug present ?
- *	-1 = don't know, 0 = no, 1 = yes
- */
-int sis_apic_bug = -1;
-
-/*
- * # of IRQ routing registers
- */
-int nr_ioapic_registers[MAX_IO_APICS];
-
-/* I/O APIC entries */
-struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
-int nr_ioapics;
-
-/* MP IRQ source entries */
-struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
-
-/* # of MP IRQ source entries */
-int mp_irq_entries;
-
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
-int mp_bus_id_to_type[MAX_MP_BUSSES];
-#endif
-
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-
-static int disable_timer_pin_1 __initdata;
-
-/*
- * Rough estimation of how many shared IRQs there are, can
- * be changed anytime.
- */
-#define MAX_PLUS_SHARED_IRQS NR_IRQS
-#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
-
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * the indexing order of this array favors 1:1 mappings
- * between pins and IRQs.
- */
-
-static struct irq_pin_list {
-	int apic, pin, next;
-} irq_2_pin[PIN_MAP_SIZE];
-
-struct io_apic {
-	unsigned int index;
-	unsigned int unused[3];
-	unsigned int data;
-};
-
-static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
-{
-	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
-		+ (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
-}
-
-static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(reg, &io_apic->index);
-	return readl(&io_apic->data);
-}
-
-static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(reg, &io_apic->index);
-	writel(value, &io_apic->data);
-}
-
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- *
- * Older SiS APIC requires we rewrite the index register
- */
-static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	volatile struct io_apic __iomem *io_apic = io_apic_base(apic);
-	if (sis_apic_bug)
-		writel(reg, &io_apic->index);
-	writel(value, &io_apic->data);
-}
-
-union entry_union {
-	struct { u32 w1, w2; };
-	struct IO_APIC_route_entry entry;
-};
-
-static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
-{
-	union entry_union eu;
-	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
-	eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	return eu.entry;
-}
-
-/*
- * When we write a new IO APIC routing entry, we need to write the high
- * word first! If the mask bit in the low word is clear, we will enable
- * the interrupt, and we need to make sure the entry is fully populated
- * before that happens.
- */
-static void
-__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
-{
-	union entry_union eu;
-	eu.entry = e;
-	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
-}
-
-static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__ioapic_write_entry(apic, pin, e);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-/*
- * When we mask an IO APIC routing entry, we need to write the low
- * word first, in order to set the mask bit before we change the
- * high bits!
- */
-static void ioapic_mask_entry(int apic, int pin)
-{
-	unsigned long flags;
-	union entry_union eu = { .entry.mask = 1 };
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
-	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-/*
- * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
- * shared ISA-space IRQs, so we have to support them. We are super
- * fast in the common case, and fast for shared ISA-space IRQs.
- */
-static void add_pin_to_irq(unsigned int irq, int apic, int pin)
-{
-	static int first_free_entry = NR_IRQS;
-	struct irq_pin_list *entry = irq_2_pin + irq;
-
-	while (entry->next)
-		entry = irq_2_pin + entry->next;
-
-	if (entry->pin != -1) {
-		entry->next = first_free_entry;
-		entry = irq_2_pin + entry->next;
-		if (++first_free_entry >= PIN_MAP_SIZE)
-			panic("io_apic.c: whoops");
-	}
-	entry->apic = apic;
-	entry->pin = pin;
-}
-
-/*
- * Reroute an IRQ to a different pin.
- */
-static void __init replace_pin_at_irq(unsigned int irq,
-				      int oldapic, int oldpin,
-				      int newapic, int newpin)
-{
-	struct irq_pin_list *entry = irq_2_pin + irq;
-
-	while (1) {
-		if (entry->apic == oldapic && entry->pin == oldpin) {
-			entry->apic = newapic;
-			entry->pin = newpin;
-		}
-		if (!entry->next)
-			break;
-		entry = irq_2_pin + entry->next;
-	}
-}
-
-static void __modify_IO_APIC_irq(unsigned int irq, unsigned long enable, unsigned long disable)
-{
-	struct irq_pin_list *entry = irq_2_pin + irq;
-	unsigned int pin, reg;
-
-	for (;;) {
-		pin = entry->pin;
-		if (pin == -1)
-			break;
-		reg = io_apic_read(entry->apic, 0x10 + pin*2);
-		reg &= ~disable;
-		reg |= enable;
-		io_apic_modify(entry->apic, 0x10 + pin*2, reg);
-		if (!entry->next)
-			break;
-		entry = irq_2_pin + entry->next;
-	}
-}
-
-/* mask = 1 */
-static void __mask_IO_APIC_irq(unsigned int irq)
-{
-	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0);
-}
-
-/* mask = 0 */
-static void __unmask_IO_APIC_irq(unsigned int irq)
-{
-	__modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED);
-}
-
-/* mask = 1, trigger = 0 */
-static void __mask_and_edge_IO_APIC_irq(unsigned int irq)
-{
-	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED,
-				IO_APIC_REDIR_LEVEL_TRIGGER);
-}
-
-/* mask = 0, trigger = 1 */
-static void __unmask_and_level_IO_APIC_irq(unsigned int irq)
-{
-	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER,
-				IO_APIC_REDIR_MASKED);
-}
-
-static void mask_IO_APIC_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__mask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void unmask_IO_APIC_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__unmask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
-{
-	struct IO_APIC_route_entry entry;
-
-	/* Check delivery_mode to be sure we're not clearing an SMI pin */
-	entry = ioapic_read_entry(apic, pin);
-	if (entry.delivery_mode == dest_SMI)
-		return;
-
-	/*
-	 * Disable it in the IO-APIC irq-routing table:
-	 */
-	ioapic_mask_entry(apic, pin);
-}
-
-static void clear_IO_APIC(void)
-{
-	int apic, pin;
-
-	for (apic = 0; apic < nr_ioapics; apic++)
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
-			clear_IO_APIC_pin(apic, pin);
-}
-
-#ifdef CONFIG_SMP
-static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
-{
-	unsigned long flags;
-	int pin;
-	struct irq_pin_list *entry = irq_2_pin + irq;
-	unsigned int apicid_value;
-	cpumask_t tmp;
-
-	cpus_and(tmp, cpumask, cpu_online_map);
-	if (cpus_empty(tmp))
-		tmp = TARGET_CPUS;
-
-	cpus_and(cpumask, tmp, CPU_MASK_ALL);
-
-	apicid_value = cpu_mask_to_apicid(cpumask);
-	/* Prepare to do the io_apic_write */
-	apicid_value = apicid_value << 24;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	for (;;) {
-		pin = entry->pin;
-		if (pin == -1)
-			break;
-		io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value);
-		if (!entry->next)
-			break;
-		entry = irq_2_pin + entry->next;
-	}
-	irq_desc[irq].affinity = cpumask;
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-#if defined(CONFIG_IRQBALANCE)
-# include <asm/processor.h>	/* kernel_thread() */
-# include <linux/kernel_stat.h>	/* kstat */
-# include <linux/slab.h>		/* kmalloc() */
-# include <linux/timer.h>
-
-#define IRQBALANCE_CHECK_ARCH -999
-#define MAX_BALANCED_IRQ_INTERVAL	(5*HZ)
-#define MIN_BALANCED_IRQ_INTERVAL	(HZ/2)
-#define BALANCED_IRQ_MORE_DELTA		(HZ/10)
-#define BALANCED_IRQ_LESS_DELTA		(HZ)
-
-static int irqbalance_disabled __read_mostly = IRQBALANCE_CHECK_ARCH;
-static int physical_balance __read_mostly;
-static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL;
-
-static struct irq_cpu_info {
-	unsigned long *last_irq;
-	unsigned long *irq_delta;
-	unsigned long irq;
-} irq_cpu_data[NR_CPUS];
-
-#define CPU_IRQ(cpu)		(irq_cpu_data[cpu].irq)
-#define LAST_CPU_IRQ(cpu, irq)   (irq_cpu_data[cpu].last_irq[irq])
-#define IRQ_DELTA(cpu, irq) 	(irq_cpu_data[cpu].irq_delta[irq])
-
-#define IDLE_ENOUGH(cpu,now) \
-	(idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1))
-
-#define IRQ_ALLOWED(cpu, allowed_mask)	cpu_isset(cpu, allowed_mask)
-
-#define CPU_TO_PACKAGEINDEX(i) (first_cpu(per_cpu(cpu_sibling_map, i)))
-
-static cpumask_t balance_irq_affinity[NR_IRQS] = {
-	[0 ... NR_IRQS-1] = CPU_MASK_ALL
-};
-
-void set_balance_irq_affinity(unsigned int irq, cpumask_t mask)
-{
-	balance_irq_affinity[irq] = mask;
-}
-
-static unsigned long move(int curr_cpu, cpumask_t allowed_mask,
-			unsigned long now, int direction)
-{
-	int search_idle = 1;
-	int cpu = curr_cpu;
-
-	goto inside;
-
-	do {
-		if (unlikely(cpu == curr_cpu))
-			search_idle = 0;
-inside:
-		if (direction == 1) {
-			cpu++;
-			if (cpu >= NR_CPUS)
-				cpu = 0;
-		} else {
-			cpu--;
-			if (cpu == -1)
-				cpu = NR_CPUS-1;
-		}
-	} while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu, allowed_mask) ||
-			(search_idle && !IDLE_ENOUGH(cpu, now)));
-
-	return cpu;
-}
-
-static inline void balance_irq(int cpu, int irq)
-{
-	unsigned long now = jiffies;
-	cpumask_t allowed_mask;
-	unsigned int new_cpu;
-
-	if (irqbalance_disabled)
-		return;
-
-	cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]);
-	new_cpu = move(cpu, allowed_mask, now, 1);
-	if (cpu != new_cpu)
-		set_pending_irq(irq, cpumask_of_cpu(new_cpu));
-}
-
-static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold)
-{
-	int i, j;
-
-	for_each_online_cpu(i) {
-		for (j = 0; j < NR_IRQS; j++) {
-			if (!irq_desc[j].action)
-				continue;
-			/* Is it a significant load ?  */
-			if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i), j) <
-						useful_load_threshold)
-				continue;
-			balance_irq(i, j);
-		}
-	}
-	balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
-		balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
-	return;
-}
-
-static void do_irq_balance(void)
-{
-	int i, j;
-	unsigned long max_cpu_irq = 0, min_cpu_irq = (~0);
-	unsigned long move_this_load = 0;
-	int max_loaded = 0, min_loaded = 0;
-	int load;
-	unsigned long useful_load_threshold = balanced_irq_interval + 10;
-	int selected_irq;
-	int tmp_loaded, first_attempt = 1;
-	unsigned long tmp_cpu_irq;
-	unsigned long imbalance = 0;
-	cpumask_t allowed_mask, target_cpu_mask, tmp;
-
-	for_each_possible_cpu(i) {
-		int package_index;
-		CPU_IRQ(i) = 0;
-		if (!cpu_online(i))
-			continue;
-		package_index = CPU_TO_PACKAGEINDEX(i);
-		for (j = 0; j < NR_IRQS; j++) {
-			unsigned long value_now, delta;
-			/* Is this an active IRQ or balancing disabled ? */
-			if (!irq_desc[j].action || irq_balancing_disabled(j))
-				continue;
-			if (package_index == i)
-				IRQ_DELTA(package_index, j) = 0;
-			/* Determine the total count per processor per IRQ */
-			value_now = (unsigned long) kstat_cpu(i).irqs[j];
-
-			/* Determine the activity per processor per IRQ */
-			delta = value_now - LAST_CPU_IRQ(i, j);
-
-			/* Update last_cpu_irq[][] for the next time */
-			LAST_CPU_IRQ(i, j) = value_now;
-
-			/* Ignore IRQs whose rate is less than the clock */
-			if (delta < useful_load_threshold)
-				continue;
-			/* update the load for the processor or package total */
-			IRQ_DELTA(package_index, j) += delta;
-
-			/* Keep track of the higher numbered sibling as well */
-			if (i != package_index)
-				CPU_IRQ(i) += delta;
-			/*
-			 * We have sibling A and sibling B in the package
-			 *
-			 * cpu_irq[A] = load for cpu A + load for cpu B
-			 * cpu_irq[B] = load for cpu B
-			 */
-			CPU_IRQ(package_index) += delta;
-		}
-	}
-	/* Find the least loaded processor package */
-	for_each_online_cpu(i) {
-		if (i != CPU_TO_PACKAGEINDEX(i))
-			continue;
-		if (min_cpu_irq > CPU_IRQ(i)) {
-			min_cpu_irq = CPU_IRQ(i);
-			min_loaded = i;
-		}
-	}
-	max_cpu_irq = ULONG_MAX;
-
-tryanothercpu:
-	/*
-	 * Look for heaviest loaded processor.
-	 * We may come back to get the next heaviest loaded processor.
-	 * Skip processors with trivial loads.
-	 */
-	tmp_cpu_irq = 0;
-	tmp_loaded = -1;
-	for_each_online_cpu(i) {
-		if (i != CPU_TO_PACKAGEINDEX(i))
-			continue;
-		if (max_cpu_irq <= CPU_IRQ(i))
-			continue;
-		if (tmp_cpu_irq < CPU_IRQ(i)) {
-			tmp_cpu_irq = CPU_IRQ(i);
-			tmp_loaded = i;
-		}
-	}
-
-	if (tmp_loaded == -1) {
-	 /*
-	  * In the case of small number of heavy interrupt sources,
-	  * loading some of the cpus too much. We use Ingo's original
-	  * approach to rotate them around.
-	  */
-		if (!first_attempt && imbalance >= useful_load_threshold) {
-			rotate_irqs_among_cpus(useful_load_threshold);
-			return;
-		}
-		goto not_worth_the_effort;
-	}
-
-	first_attempt = 0;		/* heaviest search */
-	max_cpu_irq = tmp_cpu_irq;	/* load */
-	max_loaded = tmp_loaded;	/* processor */
-	imbalance = (max_cpu_irq - min_cpu_irq) / 2;
-
-	/*
-	 * if imbalance is less than approx 10% of max load, then
-	 * observe diminishing returns action. - quit
-	 */
-	if (imbalance < (max_cpu_irq >> 3))
-		goto not_worth_the_effort;
-
-tryanotherirq:
-	/* if we select an IRQ to move that can't go where we want, then
-	 * see if there is another one to try.
-	 */
-	move_this_load = 0;
-	selected_irq = -1;
-	for (j = 0; j < NR_IRQS; j++) {
-		/* Is this an active IRQ? */
-		if (!irq_desc[j].action)
-			continue;
-		if (imbalance <= IRQ_DELTA(max_loaded, j))
-			continue;
-		/* Try to find the IRQ that is closest to the imbalance
-		 * without going over.
-		 */
-		if (move_this_load < IRQ_DELTA(max_loaded, j)) {
-			move_this_load = IRQ_DELTA(max_loaded, j);
-			selected_irq = j;
-		}
-	}
-	if (selected_irq == -1)
-		goto tryanothercpu;
-
-	imbalance = move_this_load;
-
-	/* For physical_balance case, we accumulated both load
-	 * values in the one of the siblings cpu_irq[],
-	 * to use the same code for physical and logical processors
-	 * as much as possible.
-	 *
-	 * NOTE: the cpu_irq[] array holds the sum of the load for
-	 * sibling A and sibling B in the slot for the lowest numbered
-	 * sibling (A), _AND_ the load for sibling B in the slot for
-	 * the higher numbered sibling.
-	 *
-	 * We seek the least loaded sibling by making the comparison
-	 * (A+B)/2 vs B
-	 */
-	load = CPU_IRQ(min_loaded) >> 1;
-	for_each_cpu_mask(j, per_cpu(cpu_sibling_map, min_loaded)) {
-		if (load > CPU_IRQ(j)) {
-			/* This won't change cpu_sibling_map[min_loaded] */
-			load = CPU_IRQ(j);
-			min_loaded = j;
-		}
-	}
-
-	cpus_and(allowed_mask,
-		cpu_online_map,
-		balance_irq_affinity[selected_irq]);
-	target_cpu_mask = cpumask_of_cpu(min_loaded);
-	cpus_and(tmp, target_cpu_mask, allowed_mask);
-
-	if (!cpus_empty(tmp)) {
-		/* mark for change destination */
-		set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded));
-
-		/* Since we made a change, come back sooner to
-		 * check for more variation.
-		 */
-		balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
-			balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
-		return;
-	}
-	goto tryanotherirq;
-
-not_worth_the_effort:
-	/*
-	 * if we did not find an IRQ to move, then adjust the time interval
-	 * upward
-	 */
-	balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL,
-		balanced_irq_interval + BALANCED_IRQ_MORE_DELTA);
-	return;
-}
-
-static int balanced_irq(void *unused)
-{
-	int i;
-	unsigned long prev_balance_time = jiffies;
-	long time_remaining = balanced_irq_interval;
-
-	/* push everything to CPU 0 to give us a starting point.  */
-	for (i = 0 ; i < NR_IRQS ; i++) {
-		irq_desc[i].pending_mask = cpumask_of_cpu(0);
-		set_pending_irq(i, cpumask_of_cpu(0));
-	}
-
-	set_freezable();
-	for ( ; ; ) {
-		time_remaining = schedule_timeout_interruptible(time_remaining);
-		try_to_freeze();
-		if (time_after(jiffies,
-				prev_balance_time+balanced_irq_interval)) {
-			preempt_disable();
-			do_irq_balance();
-			prev_balance_time = jiffies;
-			time_remaining = balanced_irq_interval;
-			preempt_enable();
-		}
-	}
-	return 0;
-}
-
-static int __init balanced_irq_init(void)
-{
-	int i;
-	struct cpuinfo_x86 *c;
-	cpumask_t tmp;
-
-	cpus_shift_right(tmp, cpu_online_map, 2);
-	c = &boot_cpu_data;
-	/* When not overwritten by the command line ask subarchitecture. */
-	if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH)
-		irqbalance_disabled = NO_BALANCE_IRQ;
-	if (irqbalance_disabled)
-		return 0;
-
-	 /* disable irqbalance completely if there is only one processor online */
-	if (num_online_cpus() < 2) {
-		irqbalance_disabled = 1;
-		return 0;
-	}
-	/*
-	 * Enable physical balance only if more than 1 physical processor
-	 * is present
-	 */
-	if (smp_num_siblings > 1 && !cpus_empty(tmp))
-		physical_balance = 1;
-
-	for_each_online_cpu(i) {
-		irq_cpu_data[i].irq_delta = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
-		irq_cpu_data[i].last_irq = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
-		if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) {
-			printk(KERN_ERR "balanced_irq_init: out of memory");
-			goto failed;
-		}
-	}
-
-	printk(KERN_INFO "Starting balanced_irq\n");
-	if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd")))
-		return 0;
-	printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq");
-failed:
-	for_each_possible_cpu(i) {
-		kfree(irq_cpu_data[i].irq_delta);
-		irq_cpu_data[i].irq_delta = NULL;
-		kfree(irq_cpu_data[i].last_irq);
-		irq_cpu_data[i].last_irq = NULL;
-	}
-	return 0;
-}
-
-int __devinit irqbalance_disable(char *str)
-{
-	irqbalance_disabled = 1;
-	return 1;
-}
-
-__setup("noirqbalance", irqbalance_disable);
-
-late_initcall(balanced_irq_init);
-#endif /* CONFIG_IRQBALANCE */
-#endif /* CONFIG_SMP */
-
-#ifndef CONFIG_SMP
-void send_IPI_self(int vector)
-{
-	unsigned int cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	apic_wait_icr_idle();
-	cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	apic_write(APIC_ICR, cfg);
-}
-#endif /* !CONFIG_SMP */
-
-
-/*
- * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
- * specific CPU-side IRQs.
- */
-
-#define MAX_PIRQS 8
-static int pirq_entries [MAX_PIRQS];
-static int pirqs_enabled;
-int skip_ioapic_setup;
-
-static int __init ioapic_pirq_setup(char *str)
-{
-	int i, max;
-	int ints[MAX_PIRQS+1];
-
-	get_options(str, ARRAY_SIZE(ints), ints);
-
-	for (i = 0; i < MAX_PIRQS; i++)
-		pirq_entries[i] = -1;
-
-	pirqs_enabled = 1;
-	apic_printk(APIC_VERBOSE, KERN_INFO
-			"PIRQ redirection, working around broken MP-BIOS.\n");
-	max = MAX_PIRQS;
-	if (ints[0] < MAX_PIRQS)
-		max = ints[0];
-
-	for (i = 0; i < max; i++) {
-		apic_printk(APIC_VERBOSE, KERN_DEBUG
-				"... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
-		/*
-		 * PIRQs are mapped upside down, usually.
-		 */
-		pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
-	}
-	return 1;
-}
-
-__setup("pirq=", ioapic_pirq_setup);
-
-/*
- * Find the IRQ entry number of a certain pin.
- */
-static int find_irq_entry(int apic, int pin, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mp_irqtype == type &&
-		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
-		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].mp_dstirq == pin)
-			return i;
-
-	return -1;
-}
-
-/*
- * Find the pin to which IRQ[irq] (ISA) is connected
- */
-static int __init find_isa_irq_pin(int irq, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
-
-		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mp_irqtype == type) &&
-		    (mp_irqs[i].mp_srcbusirq == irq))
-
-			return mp_irqs[i].mp_dstirq;
-	}
-	return -1;
-}
-
-static int __init find_isa_irq_apic(int irq, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
-
-		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mp_irqtype == type) &&
-		    (mp_irqs[i].mp_srcbusirq == irq))
-			break;
-	}
-	if (i < mp_irq_entries) {
-		int apic;
-		for (apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
-				return apic;
-		}
-	}
-
-	return -1;
-}
-
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
-	int apic, i, best_guess = -1;
-
-	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, "
-		"slot:%d, pin:%d.\n", bus, slot, pin);
-	if (test_bit(bus, mp_bus_not_pci)) {
-		printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
-		return -1;
-	}
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
-
-		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
-			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
-				break;
-
-		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].mp_irqtype &&
-		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i, apic, mp_irqs[i].mp_dstirq);
-
-			if (!(apic || IO_APIC_IRQ(irq)))
-				continue;
-
-			if (pin == (mp_irqs[i].mp_srcbusirq & 3))
-				return irq;
-			/*
-			 * Use the first all-but-pin matching entry as a
-			 * best-guess fuzzy result for broken mptables.
-			 */
-			if (best_guess < 0)
-				best_guess = irq;
-		}
-	}
-	return best_guess;
-}
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
-/*
- * This function currently is only a helper for the i386 smp boot process where
- * we need to reprogram the ioredtbls to cater for the cpus which have come online
- * so mask in all cases should simply be TARGET_CPUS
- */
-#ifdef CONFIG_SMP
-void __init setup_ioapic_dest(void)
-{
-	int pin, ioapic, irq, irq_entry;
-
-	if (skip_ioapic_setup == 1)
-		return;
-
-	for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
-		for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
-			irq_entry = find_irq_entry(ioapic, pin, mp_INT);
-			if (irq_entry == -1)
-				continue;
-			irq = pin_2_irq(irq_entry, ioapic, pin);
-			set_ioapic_affinity_irq(irq, TARGET_CPUS);
-		}
-
-	}
-}
-#endif
-
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
-/*
- * EISA Edge/Level control register, ELCR
- */
-static int EISA_ELCR(unsigned int irq)
-{
-	if (irq < 16) {
-		unsigned int port = 0x4d0 + (irq >> 3);
-		return (inb(port) >> (irq & 7)) & 1;
-	}
-	apic_printk(APIC_VERBOSE, KERN_INFO
-			"Broken MPtable reports ISA irq %d\n", irq);
-	return 0;
-}
-#endif
-
-/* ISA interrupts are always polarity zero edge triggered,
- * when listed as conforming in the MP table. */
-
-#define default_ISA_trigger(idx)	(0)
-#define default_ISA_polarity(idx)	(0)
-
-/* EISA interrupts are always polarity zero and can be edge or level
- * trigger depending on the ELCR value.  If an interrupt is listed as
- * EISA conforming in the MP table, that means its trigger type must
- * be read in from the ELCR */
-
-#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mp_srcbusirq))
-#define default_EISA_polarity(idx)	default_ISA_polarity(idx)
-
-/* PCI interrupts are always polarity one level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_PCI_trigger(idx)	(1)
-#define default_PCI_polarity(idx)	(1)
-
-/* MCA interrupts are always polarity zero level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_MCA_trigger(idx)	(1)
-#define default_MCA_polarity(idx)	default_ISA_polarity(idx)
-
-static int MPBIOS_polarity(int idx)
-{
-	int bus = mp_irqs[idx].mp_srcbus;
-	int polarity;
-
-	/*
-	 * Determine IRQ line polarity (high active or low active):
-	 */
-	switch (mp_irqs[idx].mp_irqflag & 3) {
-	case 0: /* conforms, ie. bus-type dependent polarity */
-	{
-		polarity = test_bit(bus, mp_bus_not_pci)?
-			default_ISA_polarity(idx):
-			default_PCI_polarity(idx);
-		break;
-	}
-	case 1: /* high active */
-	{
-		polarity = 0;
-		break;
-	}
-	case 2: /* reserved */
-	{
-		printk(KERN_WARNING "broken BIOS!!\n");
-		polarity = 1;
-		break;
-	}
-	case 3: /* low active */
-	{
-		polarity = 1;
-		break;
-	}
-	default: /* invalid */
-	{
-		printk(KERN_WARNING "broken BIOS!!\n");
-		polarity = 1;
-		break;
-	}
-	}
-	return polarity;
-}
-
-static int MPBIOS_trigger(int idx)
-{
-	int bus = mp_irqs[idx].mp_srcbus;
-	int trigger;
-
-	/*
-	 * Determine IRQ trigger mode (edge or level sensitive):
-	 */
-	switch ((mp_irqs[idx].mp_irqflag>>2) & 3) {
-	case 0: /* conforms, ie. bus-type dependent */
-	{
-		trigger = test_bit(bus, mp_bus_not_pci)?
-				default_ISA_trigger(idx):
-				default_PCI_trigger(idx);
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
-		switch (mp_bus_id_to_type[bus]) {
-		case MP_BUS_ISA: /* ISA pin */
-		{
-			/* set before the switch */
-			break;
-		}
-		case MP_BUS_EISA: /* EISA pin */
-		{
-			trigger = default_EISA_trigger(idx);
-			break;
-		}
-		case MP_BUS_PCI: /* PCI pin */
-		{
-			/* set before the switch */
-			break;
-		}
-		case MP_BUS_MCA: /* MCA pin */
-		{
-			trigger = default_MCA_trigger(idx);
-			break;
-		}
-		default:
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 1;
-			break;
-		}
-	}
-#endif
-		break;
-	}
-	case 1: /* edge */
-	{
-		trigger = 0;
-		break;
-	}
-	case 2: /* reserved */
-	{
-		printk(KERN_WARNING "broken BIOS!!\n");
-		trigger = 1;
-		break;
-	}
-	case 3: /* level */
-	{
-		trigger = 1;
-		break;
-	}
-	default: /* invalid */
-	{
-		printk(KERN_WARNING "broken BIOS!!\n");
-		trigger = 0;
-		break;
-	}
-	}
-	return trigger;
-}
-
-static inline int irq_polarity(int idx)
-{
-	return MPBIOS_polarity(idx);
-}
-
-static inline int irq_trigger(int idx)
-{
-	return MPBIOS_trigger(idx);
-}
-
-static int pin_2_irq(int idx, int apic, int pin)
-{
-	int irq, i;
-	int bus = mp_irqs[idx].mp_srcbus;
-
-	/*
-	 * Debugging check, we are in big trouble if this message pops up!
-	 */
-	if (mp_irqs[idx].mp_dstirq != pin)
-		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
-
-	if (test_bit(bus, mp_bus_not_pci))
-		irq = mp_irqs[idx].mp_srcbusirq;
-	else {
-		/*
-		 * PCI IRQs are mapped in order
-		 */
-		i = irq = 0;
-		while (i < apic)
-			irq += nr_ioapic_registers[i++];
-		irq += pin;
-
-		/*
-		 * For MPS mode, so far only needed by ES7000 platform
-		 */
-		if (ioapic_renumber_irq)
-			irq = ioapic_renumber_irq(apic, irq);
-	}
-
-	/*
-	 * PCI IRQ command line redirection. Yes, limits are hardcoded.
-	 */
-	if ((pin >= 16) && (pin <= 23)) {
-		if (pirq_entries[pin-16] != -1) {
-			if (!pirq_entries[pin-16]) {
-				apic_printk(APIC_VERBOSE, KERN_DEBUG
-						"disabling PIRQ%d\n", pin-16);
-			} else {
-				irq = pirq_entries[pin-16];
-				apic_printk(APIC_VERBOSE, KERN_DEBUG
-						"using PIRQ%d -> IRQ %d\n",
-						pin-16, irq);
-			}
-		}
-	}
-	return irq;
-}
-
-static inline int IO_APIC_irq_trigger(int irq)
-{
-	int apic, idx, pin;
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			idx = find_irq_entry(apic, pin, mp_INT);
-			if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin)))
-				return irq_trigger(idx);
-		}
-	}
-	/*
-	 * nonexistent IRQs are edge default
-	 */
-	return 0;
-}
-
-/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
-static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 };
-
-static int __assign_irq_vector(int irq)
-{
-	static int current_vector = FIRST_DEVICE_VECTOR, current_offset;
-	int vector, offset;
-
-	BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
-
-	if (irq_vector[irq] > 0)
-		return irq_vector[irq];
-
-	vector = current_vector;
-	offset = current_offset;
-next:
-	vector += 8;
-	if (vector >= first_system_vector) {
-		offset = (offset + 1) % 8;
-		vector = FIRST_DEVICE_VECTOR + offset;
-	}
-	if (vector == current_vector)
-		return -ENOSPC;
-	if (test_and_set_bit(vector, used_vectors))
-		goto next;
-
-	current_vector = vector;
-	current_offset = offset;
-	irq_vector[irq] = vector;
-
-	return vector;
-}
-
-static int assign_irq_vector(int irq)
-{
-	unsigned long flags;
-	int vector;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	vector = __assign_irq_vector(irq);
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	return vector;
-}
-
-static struct irq_chip ioapic_chip;
-
-#define IOAPIC_AUTO	-1
-#define IOAPIC_EDGE	0
-#define IOAPIC_LEVEL	1
-
-static void ioapic_register_intr(int irq, int vector, unsigned long trigger)
-{
-	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
-	    trigger == IOAPIC_LEVEL) {
-		irq_desc[irq].status |= IRQ_LEVEL;
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					 handle_fasteoi_irq, "fasteoi");
-	} else {
-		irq_desc[irq].status &= ~IRQ_LEVEL;
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					 handle_edge_irq, "edge");
-	}
-	set_intr_gate(vector, interrupt[irq]);
-}
-
-static void __init setup_IO_APIC_irqs(void)
-{
-	struct IO_APIC_route_entry entry;
-	int apic, pin, idx, irq, first_notcon = 1, vector;
-
-	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-	for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-
-		/*
-		 * add it to the IO-APIC irq-routing table:
-		 */
-		memset(&entry, 0, sizeof(entry));
-
-		entry.delivery_mode = INT_DELIVERY_MODE;
-		entry.dest_mode = INT_DEST_MODE;
-		entry.mask = 0;				/* enable IRQ */
-		entry.dest.logical.logical_dest =
-					cpu_mask_to_apicid(TARGET_CPUS);
-
-		idx = find_irq_entry(apic, pin, mp_INT);
-		if (idx == -1) {
-			if (first_notcon) {
-				apic_printk(APIC_VERBOSE, KERN_DEBUG
-						" IO-APIC (apicid-pin) %d-%d",
-						mp_ioapics[apic].mp_apicid,
-						pin);
-				first_notcon = 0;
-			} else
-				apic_printk(APIC_VERBOSE, ", %d-%d",
-					mp_ioapics[apic].mp_apicid, pin);
-			continue;
-		}
-
-		if (!first_notcon) {
-			apic_printk(APIC_VERBOSE, " not connected.\n");
-			first_notcon = 1;
-		}
-
-		entry.trigger = irq_trigger(idx);
-		entry.polarity = irq_polarity(idx);
-
-		if (irq_trigger(idx)) {
-			entry.trigger = 1;
-			entry.mask = 1;
-		}
-
-		irq = pin_2_irq(idx, apic, pin);
-		/*
-		 * skip adding the timer int on secondary nodes, which causes
-		 * a small but painful rift in the time-space continuum
-		 */
-		if (multi_timer_check(apic, irq))
-			continue;
-		else
-			add_pin_to_irq(irq, apic, pin);
-
-		if (!apic && !IO_APIC_IRQ(irq))
-			continue;
-
-		if (IO_APIC_IRQ(irq)) {
-			vector = assign_irq_vector(irq);
-			entry.vector = vector;
-			ioapic_register_intr(irq, vector, IOAPIC_AUTO);
-
-			if (!apic && (irq < 16))
-				disable_8259A_irq(irq);
-		}
-		ioapic_write_entry(apic, pin, entry);
-	}
-	}
-
-	if (!first_notcon)
-		apic_printk(APIC_VERBOSE, " not connected.\n");
-}
-
-/*
- * Set up the timer pin, possibly with the 8259A-master behind.
- */
-static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
-					int vector)
-{
-	struct IO_APIC_route_entry entry;
-
-	memset(&entry, 0, sizeof(entry));
-
-	/*
-	 * We use logical delivery to get the timer IRQ
-	 * to the first CPU.
-	 */
-	entry.dest_mode = INT_DEST_MODE;
-	entry.mask = 1;					/* mask IRQ now */
-	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
-	entry.delivery_mode = INT_DELIVERY_MODE;
-	entry.polarity = 0;
-	entry.trigger = 0;
-	entry.vector = vector;
-
-	/*
-	 * The timer IRQ doesn't have to know that behind the
-	 * scene we may have a 8259A-master in AEOI mode ...
-	 */
-	ioapic_register_intr(0, vector, IOAPIC_EDGE);
-
-	/*
-	 * Add it to the IO-APIC irq-routing table:
-	 */
-	ioapic_write_entry(apic, pin, entry);
-}
-
-void __init print_IO_APIC(void)
-{
-	int apic, i;
-	union IO_APIC_reg_00 reg_00;
-	union IO_APIC_reg_01 reg_01;
-	union IO_APIC_reg_02 reg_02;
-	union IO_APIC_reg_03 reg_03;
-	unsigned long flags;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
-	for (i = 0; i < nr_ioapics; i++)
-		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
-		       mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
-
-	/*
-	 * We are a bit conservative about what we expect.  We have to
-	 * know about every hardware change ASAP.
-	 */
-	printk(KERN_INFO "testing the IO APIC.......................\n");
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(apic, 0);
-	reg_01.raw = io_apic_read(apic, 1);
-	if (reg_01.bits.version >= 0x10)
-		reg_02.raw = io_apic_read(apic, 2);
-	if (reg_01.bits.version >= 0x20)
-		reg_03.raw = io_apic_read(apic, 3);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
-	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
-	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
-	printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
-	printk(KERN_DEBUG ".......    : LTS          : %X\n", reg_00.bits.LTS);
-
-	printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw);
-	printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
-
-	printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
-	printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
-
-	/*
-	 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
-	 * but the value of reg_02 is read as the previous read register
-	 * value, so ignore it if reg_02 == reg_01.
-	 */
-	if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
-		printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
-		printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
-	}
-
-	/*
-	 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
-	 * or reg_03, but the value of reg_0[23] is read as the previous read
-	 * register value, so ignore it if reg_03 == reg_0[12].
-	 */
-	if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
-	    reg_03.raw != reg_01.raw) {
-		printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
-		printk(KERN_DEBUG ".......     : Boot DT    : %X\n", reg_03.bits.boot_DT);
-	}
-
-	printk(KERN_DEBUG ".... IRQ redirection table:\n");
-
-	printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
-			  " Stat Dest Deli Vect:   \n");
-
-	for (i = 0; i <= reg_01.bits.entries; i++) {
-		struct IO_APIC_route_entry entry;
-
-		entry = ioapic_read_entry(apic, i);
-
-		printk(KERN_DEBUG " %02x %03X %02X  ",
-			i,
-			entry.dest.logical.logical_dest,
-			entry.dest.physical.physical_dest
-		);
-
-		printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
-			entry.mask,
-			entry.trigger,
-			entry.irr,
-			entry.polarity,
-			entry.delivery_status,
-			entry.dest_mode,
-			entry.delivery_mode,
-			entry.vector
-		);
-	}
-	}
-	printk(KERN_DEBUG "IRQ to pin mappings:\n");
-	for (i = 0; i < NR_IRQS; i++) {
-		struct irq_pin_list *entry = irq_2_pin + i;
-		if (entry->pin < 0)
-			continue;
-		printk(KERN_DEBUG "IRQ%d ", i);
-		for (;;) {
-			printk("-> %d:%d", entry->apic, entry->pin);
-			if (!entry->next)
-				break;
-			entry = irq_2_pin + entry->next;
-		}
-		printk("\n");
-	}
-
-	printk(KERN_INFO ".................................... done.\n");
-
-	return;
-}
-
-#if 0
-
-static void print_APIC_bitfield(int base)
-{
-	unsigned int v;
-	int i, j;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
-	for (i = 0; i < 8; i++) {
-		v = apic_read(base + i*0x10);
-		for (j = 0; j < 32; j++) {
-			if (v & (1<<j))
-				printk("1");
-			else
-				printk("0");
-		}
-		printk("\n");
-	}
-}
-
-void /*__init*/ print_local_APIC(void *dummy)
-{
-	unsigned int v, ver, maxlvt;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
-		smp_processor_id(), hard_smp_processor_id());
-	v = apic_read(APIC_ID);
-	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v,
-			GET_APIC_ID(read_apic_id()));
-	v = apic_read(APIC_LVR);
-	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
-	ver = GET_APIC_VERSION(v);
-	maxlvt = lapic_get_maxlvt();
-
-	v = apic_read(APIC_TASKPRI);
-	printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
-
-	if (APIC_INTEGRATED(ver)) {			/* !82489DX */
-		v = apic_read(APIC_ARBPRI);
-		printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
-			v & APIC_ARBPRI_MASK);
-		v = apic_read(APIC_PROCPRI);
-		printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
-	}
-
-	v = apic_read(APIC_EOI);
-	printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
-	v = apic_read(APIC_RRR);
-	printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
-	v = apic_read(APIC_LDR);
-	printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
-	v = apic_read(APIC_DFR);
-	printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
-	v = apic_read(APIC_SPIV);
-	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
-
-	printk(KERN_DEBUG "... APIC ISR field:\n");
-	print_APIC_bitfield(APIC_ISR);
-	printk(KERN_DEBUG "... APIC TMR field:\n");
-	print_APIC_bitfield(APIC_TMR);
-	printk(KERN_DEBUG "... APIC IRR field:\n");
-	print_APIC_bitfield(APIC_IRR);
-
-	if (APIC_INTEGRATED(ver)) {		/* !82489DX */
-		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
-			apic_write(APIC_ESR, 0);
-		v = apic_read(APIC_ESR);
-		printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
-	}
-
-	v = apic_read(APIC_ICR);
-	printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
-	v = apic_read(APIC_ICR2);
-	printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
-
-	v = apic_read(APIC_LVTT);
-	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
-
-	if (maxlvt > 3) {                       /* PC is LVT#4. */
-		v = apic_read(APIC_LVTPC);
-		printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
-	}
-	v = apic_read(APIC_LVT0);
-	printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
-	v = apic_read(APIC_LVT1);
-	printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
-
-	if (maxlvt > 2) {			/* ERR is LVT#3. */
-		v = apic_read(APIC_LVTERR);
-		printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
-	}
-
-	v = apic_read(APIC_TMICT);
-	printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
-	v = apic_read(APIC_TMCCT);
-	printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
-	v = apic_read(APIC_TDCR);
-	printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
-	printk("\n");
-}
-
-void print_all_local_APICs(void)
-{
-	on_each_cpu(print_local_APIC, NULL, 1);
-}
-
-void /*__init*/ print_PIC(void)
-{
-	unsigned int v;
-	unsigned long flags;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "\nprinting PIC contents\n");
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	v = inb(0xa1) << 8 | inb(0x21);
-	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
-
-	v = inb(0xa0) << 8 | inb(0x20);
-	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
-
-	outb(0x0b, 0xa0);
-	outb(0x0b, 0x20);
-	v = inb(0xa0) << 8 | inb(0x20);
-	outb(0x0a, 0xa0);
-	outb(0x0a, 0x20);
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
-
-	v = inb(0x4d1) << 8 | inb(0x4d0);
-	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
-}
-
-#endif  /*  0  */
-
-static void __init enable_IO_APIC(void)
-{
-	union IO_APIC_reg_01 reg_01;
-	int i8259_apic, i8259_pin;
-	int i, apic;
-	unsigned long flags;
-
-	for (i = 0; i < PIN_MAP_SIZE; i++) {
-		irq_2_pin[i].pin = -1;
-		irq_2_pin[i].next = 0;
-	}
-	if (!pirqs_enabled)
-		for (i = 0; i < MAX_PIRQS; i++)
-			pirq_entries[i] = -1;
-
-	/*
-	 * The number of IO-APIC IRQ registers (== #pins):
-	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(apic, 1);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
-	}
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		int pin;
-		/* See if any of the pins is in ExtINT mode */
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			struct IO_APIC_route_entry entry;
-			entry = ioapic_read_entry(apic, pin);
-
-
-			/* If the interrupt line is enabled and in ExtInt mode
-			 * I have found the pin where the i8259 is connected.
-			 */
-			if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
-				ioapic_i8259.apic = apic;
-				ioapic_i8259.pin  = pin;
-				goto found_i8259;
-			}
-		}
-	}
- found_i8259:
-	/* Look to see what if the MP table has reported the ExtINT */
-	/* If we could not find the appropriate pin by looking at the ioapic
-	 * the i8259 probably is not connected the ioapic but give the
-	 * mptable a chance anyway.
-	 */
-	i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
-	i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
-	/* Trust the MP table if nothing is setup in the hardware */
-	if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
-		printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
-		ioapic_i8259.pin  = i8259_pin;
-		ioapic_i8259.apic = i8259_apic;
-	}
-	/* Complain if the MP table and the hardware disagree */
-	if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
-		(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
-	{
-		printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
-	}
-
-	/*
-	 * Do not trust the IO-APIC being empty at bootup
-	 */
-	clear_IO_APIC();
-}
-
-/*
- * Not an __init, needed by the reboot code
- */
-void disable_IO_APIC(void)
-{
-	/*
-	 * Clear the IO-APIC before rebooting:
-	 */
-	clear_IO_APIC();
-
-	/*
-	 * If the i8259 is routed through an IOAPIC
-	 * Put that IOAPIC in virtual wire mode
-	 * so legacy interrupts can be delivered.
-	 */
-	if (ioapic_i8259.pin != -1) {
-		struct IO_APIC_route_entry entry;
-
-		memset(&entry, 0, sizeof(entry));
-		entry.mask            = 0; /* Enabled */
-		entry.trigger         = 0; /* Edge */
-		entry.irr             = 0;
-		entry.polarity        = 0; /* High */
-		entry.delivery_status = 0;
-		entry.dest_mode       = 0; /* Physical */
-		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
-		entry.vector          = 0;
-		entry.dest.physical.physical_dest =
-					GET_APIC_ID(read_apic_id());
-
-		/*
-		 * Add it to the IO-APIC irq-routing table:
-		 */
-		ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
-	}
-	disconnect_bsp_APIC(ioapic_i8259.pin != -1);
-}
-
-/*
- * function to set the IO-APIC physical IDs based on the
- * values stored in the MPC table.
- *
- * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
- */
-
-static void __init setup_ioapic_ids_from_mpc(void)
-{
-	union IO_APIC_reg_00 reg_00;
-	physid_mask_t phys_id_present_map;
-	int apic;
-	int i;
-	unsigned char old_id;
-	unsigned long flags;
-
-#ifdef CONFIG_X86_NUMAQ
-	if (found_numaq)
-		return;
-#endif
-
-	/*
-	 * Don't check I/O APIC IDs for xAPIC systems.  They have
-	 * no meaning without the serial APIC bus.
-	 */
-	if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
-		|| APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return;
-	/*
-	 * This is broken; anything with a real cpu count has to
-	 * circumvent this idiocy regardless.
-	 */
-	phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
-
-	/*
-	 * Set the IOAPIC ID to the value stored in the MPC table.
-	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
-
-		/* Read the register 0 value */
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_00.raw = io_apic_read(apic, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-
-		old_id = mp_ioapics[apic].mp_apicid;
-
-		if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) {
-			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
-				apic, mp_ioapics[apic].mp_apicid);
-			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
-				reg_00.bits.ID);
-			mp_ioapics[apic].mp_apicid = reg_00.bits.ID;
-		}
-
-		/*
-		 * Sanity check, is the ID really free? Every APIC in a
-		 * system must have a unique ID or we get lots of nice
-		 * 'stuck on smp_invalidate_needed IPI wait' messages.
-		 */
-		if (check_apicid_used(phys_id_present_map,
-					mp_ioapics[apic].mp_apicid)) {
-			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
-				apic, mp_ioapics[apic].mp_apicid);
-			for (i = 0; i < get_physical_broadcast(); i++)
-				if (!physid_isset(i, phys_id_present_map))
-					break;
-			if (i >= get_physical_broadcast())
-				panic("Max APIC ID exceeded!\n");
-			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
-				i);
-			physid_set(i, phys_id_present_map);
-			mp_ioapics[apic].mp_apicid = i;
-		} else {
-			physid_mask_t tmp;
-			tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid);
-			apic_printk(APIC_VERBOSE, "Setting %d in the "
-					"phys_id_present_map\n",
-					mp_ioapics[apic].mp_apicid);
-			physids_or(phys_id_present_map, phys_id_present_map, tmp);
-		}
-
-
-		/*
-		 * We need to adjust the IRQ routing table
-		 * if the ID changed.
-		 */
-		if (old_id != mp_ioapics[apic].mp_apicid)
-			for (i = 0; i < mp_irq_entries; i++)
-				if (mp_irqs[i].mp_dstapic == old_id)
-					mp_irqs[i].mp_dstapic
-						= mp_ioapics[apic].mp_apicid;
-
-		/*
-		 * Read the right value from the MPC table and
-		 * write it into the ID register.
-		 */
-		apic_printk(APIC_VERBOSE, KERN_INFO
-			"...changing IO-APIC physical APIC ID to %d ...",
-			mp_ioapics[apic].mp_apicid);
-
-		reg_00.bits.ID = mp_ioapics[apic].mp_apicid;
-		spin_lock_irqsave(&ioapic_lock, flags);
-		io_apic_write(apic, 0, reg_00.raw);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-
-		/*
-		 * Sanity check
-		 */
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_00.raw = io_apic_read(apic, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid)
-			printk("could not set ID!\n");
-		else
-			apic_printk(APIC_VERBOSE, " ok.\n");
-	}
-}
-
-int no_timer_check __initdata;
-
-static int __init notimercheck(char *s)
-{
-	no_timer_check = 1;
-	return 1;
-}
-__setup("no_timer_check", notimercheck);
-
-/*
- * There is a nasty bug in some older SMP boards, their mptable lies
- * about the timer IRQ. We do the following to work around the situation:
- *
- *	- timer IRQ defaults to IO-APIC IRQ
- *	- if this function detects that timer IRQs are defunct, then we fall
- *	  back to ISA timer IRQs
- */
-static int __init timer_irq_works(void)
-{
-	unsigned long t1 = jiffies;
-	unsigned long flags;
-
-	if (no_timer_check)
-		return 1;
-
-	local_save_flags(flags);
-	local_irq_enable();
-	/* Let ten ticks pass... */
-	mdelay((10 * 1000) / HZ);
-	local_irq_restore(flags);
-
-	/*
-	 * Expect a few ticks at least, to be sure some possible
-	 * glue logic does not lock up after one or two first
-	 * ticks in a non-ExtINT mode.  Also the local APIC
-	 * might have cached one ExtINT interrupt.  Finally, at
-	 * least one tick may be lost due to delays.
-	 */
-	if (time_after(jiffies, t1 + 4))
-		return 1;
-
-	return 0;
-}
-
-/*
- * In the SMP+IOAPIC case it might happen that there are an unspecified
- * number of pending IRQ events unhandled. These cases are very rare,
- * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
- * better to do it this way as thus we do not have to be aware of
- * 'pending' interrupts in the IRQ path, except at this point.
- */
-/*
- * Edge triggered needs to resend any interrupt
- * that was delayed but this is now handled in the device
- * independent code.
- */
-
-/*
- * Startup quirk:
- *
- * Starting up a edge-triggered IO-APIC interrupt is
- * nasty - we need to make sure that we get the edge.
- * If it is already asserted for some reason, we need
- * return 1 to indicate that is was pending.
- *
- * This is not complete - we should be able to fake
- * an edge even if it isn't on the 8259A...
- *
- * (We do this for level-triggered IRQs too - it cannot hurt.)
- */
-static unsigned int startup_ioapic_irq(unsigned int irq)
-{
-	int was_pending = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	if (irq < 16) {
-		disable_8259A_irq(irq);
-		if (i8259A_irq_pending(irq))
-			was_pending = 1;
-	}
-	__unmask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return was_pending;
-}
-
-static void ack_ioapic_irq(unsigned int irq)
-{
-	move_native_irq(irq);
-	ack_APIC_irq();
-}
-
-static void ack_ioapic_quirk_irq(unsigned int irq)
-{
-	unsigned long v;
-	int i;
-
-	move_native_irq(irq);
-/*
- * It appears there is an erratum which affects at least version 0x11
- * of I/O APIC (that's the 82093AA and cores integrated into various
- * chipsets).  Under certain conditions a level-triggered interrupt is
- * erroneously delivered as edge-triggered one but the respective IRR
- * bit gets set nevertheless.  As a result the I/O unit expects an EOI
- * message but it will never arrive and further interrupts are blocked
- * from the source.  The exact reason is so far unknown, but the
- * phenomenon was observed when two consecutive interrupt requests
- * from a given source get delivered to the same CPU and the source is
- * temporarily disabled in between.
- *
- * A workaround is to simulate an EOI message manually.  We achieve it
- * by setting the trigger mode to edge and then to level when the edge
- * trigger mode gets detected in the TMR of a local APIC for a
- * level-triggered interrupt.  We mask the source for the time of the
- * operation to prevent an edge-triggered interrupt escaping meanwhile.
- * The idea is from Manfred Spraul.  --macro
- */
-	i = irq_vector[irq];
-
-	v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
-
-	ack_APIC_irq();
-
-	if (!(v & (1 << (i & 0x1f)))) {
-		atomic_inc(&irq_mis_count);
-		spin_lock(&ioapic_lock);
-		__mask_and_edge_IO_APIC_irq(irq);
-		__unmask_and_level_IO_APIC_irq(irq);
-		spin_unlock(&ioapic_lock);
-	}
-}
-
-static int ioapic_retrigger_irq(unsigned int irq)
-{
-	send_IPI_self(irq_vector[irq]);
-
-	return 1;
-}
-
-static struct irq_chip ioapic_chip __read_mostly = {
-	.name 		= "IO-APIC",
-	.startup 	= startup_ioapic_irq,
-	.mask	 	= mask_IO_APIC_irq,
-	.unmask	 	= unmask_IO_APIC_irq,
-	.ack 		= ack_ioapic_irq,
-	.eoi 		= ack_ioapic_quirk_irq,
-#ifdef CONFIG_SMP
-	.set_affinity 	= set_ioapic_affinity_irq,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-
-static inline void init_IO_APIC_traps(void)
-{
-	int irq;
-
-	/*
-	 * NOTE! The local APIC isn't very good at handling
-	 * multiple interrupts at the same interrupt level.
-	 * As the interrupt level is determined by taking the
-	 * vector number and shifting that right by 4, we
-	 * want to spread these out a bit so that they don't
-	 * all fall in the same interrupt level.
-	 *
-	 * Also, we've got to be careful not to trash gate
-	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
-	 */
-	for (irq = 0; irq < NR_IRQS ; irq++) {
-		if (IO_APIC_IRQ(irq) && !irq_vector[irq]) {
-			/*
-			 * Hmm.. We don't have an entry for this,
-			 * so default to an old-fashioned 8259
-			 * interrupt if we can..
-			 */
-			if (irq < 16)
-				make_8259A_irq(irq);
-			else
-				/* Strange. Oh, well.. */
-				irq_desc[irq].chip = &no_irq_chip;
-		}
-	}
-}
-
-/*
- * The local APIC irq-chip implementation:
- */
-
-static void ack_lapic_irq(unsigned int irq)
-{
-	ack_APIC_irq();
-}
-
-static void mask_lapic_irq(unsigned int irq)
-{
-	unsigned long v;
-
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
-}
-
-static void unmask_lapic_irq(unsigned int irq)
-{
-	unsigned long v;
-
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
-}
-
-static struct irq_chip lapic_chip __read_mostly = {
-	.name		= "local-APIC",
-	.mask		= mask_lapic_irq,
-	.unmask		= unmask_lapic_irq,
-	.ack		= ack_lapic_irq,
-};
-
-static void lapic_register_intr(int irq, int vector)
-{
-	irq_desc[irq].status &= ~IRQ_LEVEL;
-	set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
-				      "edge");
-	set_intr_gate(vector, interrupt[irq]);
-}
-
-static void __init setup_nmi(void)
-{
-	/*
-	 * Dirty trick to enable the NMI watchdog ...
-	 * We put the 8259A master into AEOI mode and
-	 * unmask on all local APICs LVT0 as NMI.
-	 *
-	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
-	 * is from Maciej W. Rozycki - so we do not have to EOI from
-	 * the NMI handler or the timer interrupt.
-	 */
-	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
-
-	enable_NMI_through_LVT0();
-
-	apic_printk(APIC_VERBOSE, " done.\n");
-}
-
-/*
- * This looks a bit hackish but it's about the only one way of sending
- * a few INTA cycles to 8259As and any associated glue logic.  ICR does
- * not support the ExtINT mode, unfortunately.  We need to send these
- * cycles as some i82489DX-based boards have glue logic that keeps the
- * 8259A interrupt line asserted until INTA.  --macro
- */
-static inline void __init unlock_ExtINT_logic(void)
-{
-	int apic, pin, i;
-	struct IO_APIC_route_entry entry0, entry1;
-	unsigned char save_control, save_freq_select;
-
-	pin  = find_isa_irq_pin(8, mp_INT);
-	if (pin == -1) {
-		WARN_ON_ONCE(1);
-		return;
-	}
-	apic = find_isa_irq_apic(8, mp_INT);
-	if (apic == -1) {
-		WARN_ON_ONCE(1);
-		return;
-	}
-
-	entry0 = ioapic_read_entry(apic, pin);
-	clear_IO_APIC_pin(apic, pin);
-
-	memset(&entry1, 0, sizeof(entry1));
-
-	entry1.dest_mode = 0;			/* physical delivery */
-	entry1.mask = 0;			/* unmask IRQ now */
-	entry1.dest.physical.physical_dest = hard_smp_processor_id();
-	entry1.delivery_mode = dest_ExtINT;
-	entry1.polarity = entry0.polarity;
-	entry1.trigger = 0;
-	entry1.vector = 0;
-
-	ioapic_write_entry(apic, pin, entry1);
-
-	save_control = CMOS_READ(RTC_CONTROL);
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
-		   RTC_FREQ_SELECT);
-	CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
-
-	i = 100;
-	while (i-- > 0) {
-		mdelay(10);
-		if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
-			i -= 10;
-	}
-
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	clear_IO_APIC_pin(apic, pin);
-
-	ioapic_write_entry(apic, pin, entry0);
-}
-
-/*
- * This code may look a bit paranoid, but it's supposed to cooperate with
- * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
- * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
- * fanatically on his truly buggy board.
- */
-static inline void __init check_timer(void)
-{
-	int apic1, pin1, apic2, pin2;
-	int no_pin1 = 0;
-	int vector;
-	unsigned int ver;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	ver = apic_read(APIC_LVR);
-	ver = GET_APIC_VERSION(ver);
-
-	/*
-	 * get/set the timer IRQ vector:
-	 */
-	disable_8259A_irq(0);
-	vector = assign_irq_vector(0);
-	set_intr_gate(vector, interrupt[0]);
-
-	/*
-	 * As IRQ0 is to be enabled in the 8259A, the virtual
-	 * wire has to be disabled in the local APIC.  Also
-	 * timer interrupts need to be acknowledged manually in
-	 * the 8259A for the i82489DX when using the NMI
-	 * watchdog as that APIC treats NMIs as level-triggered.
-	 * The AEOI mode will finish them in the 8259A
-	 * automatically.
-	 */
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-	init_8259A(1);
-	timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
-
-	pin1  = find_isa_irq_pin(0, mp_INT);
-	apic1 = find_isa_irq_apic(0, mp_INT);
-	pin2  = ioapic_i8259.pin;
-	apic2 = ioapic_i8259.apic;
-
-	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
-		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		    vector, apic1, pin1, apic2, pin2);
-
-	/*
-	 * Some BIOS writers are clueless and report the ExtINTA
-	 * I/O APIC input from the cascaded 8259A as the timer
-	 * interrupt input.  So just in case, if only one pin
-	 * was found above, try it both directly and through the
-	 * 8259A.
-	 */
-	if (pin1 == -1) {
-		pin1 = pin2;
-		apic1 = apic2;
-		no_pin1 = 1;
-	} else if (pin2 == -1) {
-		pin2 = pin1;
-		apic2 = apic1;
-	}
-
-	if (pin1 != -1) {
-		/*
-		 * Ok, does IRQ0 through the IOAPIC work?
-		 */
-		if (no_pin1) {
-			add_pin_to_irq(0, apic1, pin1);
-			setup_timer_IRQ0_pin(apic1, pin1, vector);
-		}
-		unmask_IO_APIC_irq(0);
-		if (timer_irq_works()) {
-			if (nmi_watchdog == NMI_IO_APIC) {
-				setup_nmi();
-				enable_8259A_irq(0);
-			}
-			if (disable_timer_pin_1 > 0)
-				clear_IO_APIC_pin(0, pin1);
-			goto out;
-		}
-		clear_IO_APIC_pin(apic1, pin1);
-		if (!no_pin1)
-			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
-				    "8254 timer not connected to IO-APIC\n");
-
-		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
-			    "(IRQ0) through the 8259A ...\n");
-		apic_printk(APIC_QUIET, KERN_INFO
-			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
-		/*
-		 * legacy devices should be connected to IO APIC #0
-		 */
-		replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
-		setup_timer_IRQ0_pin(apic2, pin2, vector);
-		unmask_IO_APIC_irq(0);
-		enable_8259A_irq(0);
-		if (timer_irq_works()) {
-			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
-			timer_through_8259 = 1;
-			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
-				setup_nmi();
-				enable_8259A_irq(0);
-			}
-			goto out;
-		}
-		/*
-		 * Cleanup, just in case ...
-		 */
-		disable_8259A_irq(0);
-		clear_IO_APIC_pin(apic2, pin2);
-		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
-	}
-
-	if (nmi_watchdog == NMI_IO_APIC) {
-		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
-			    "through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = NMI_NONE;
-	}
-	timer_ack = 0;
-
-	apic_printk(APIC_QUIET, KERN_INFO
-		    "...trying to set up timer as Virtual Wire IRQ...\n");
-
-	lapic_register_intr(0, vector);
-	apic_write(APIC_LVT0, APIC_DM_FIXED | vector);	/* Fixed mode */
-	enable_8259A_irq(0);
-
-	if (timer_irq_works()) {
-		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
-		goto out;
-	}
-	disable_8259A_irq(0);
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
-	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
-
-	apic_printk(APIC_QUIET, KERN_INFO
-		    "...trying to set up timer as ExtINT IRQ...\n");
-
-	init_8259A(0);
-	make_8259A_irq(0);
-	apic_write(APIC_LVT0, APIC_DM_EXTINT);
-
-	unlock_ExtINT_logic();
-
-	if (timer_irq_works()) {
-		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
-		goto out;
-	}
-	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
-	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
-		"report.  Then try booting with the 'noapic' option.\n");
-out:
-	local_irq_restore(flags);
-}
-
-/*
- * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
- * to devices.  However there may be an I/O APIC pin available for
- * this interrupt regardless.  The pin may be left unconnected, but
- * typically it will be reused as an ExtINT cascade interrupt for
- * the master 8259A.  In the MPS case such a pin will normally be
- * reported as an ExtINT interrupt in the MP table.  With ACPI
- * there is no provision for ExtINT interrupts, and in the absence
- * of an override it would be treated as an ordinary ISA I/O APIC
- * interrupt, that is edge-triggered and unmasked by default.  We
- * used to do this, but it caused problems on some systems because
- * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
- * the same ExtINT cascade interrupt to drive the local APIC of the
- * bootstrap processor.  Therefore we refrain from routing IRQ2 to
- * the I/O APIC in all cases now.  No actual device should request
- * it anyway.  --macro
- */
-#define PIC_IRQS	(1 << PIC_CASCADE_IR)
-
-void __init setup_IO_APIC(void)
-{
-	int i;
-
-	/* Reserve all the system vectors. */
-	for (i = first_system_vector; i < NR_VECTORS; i++)
-		set_bit(i, used_vectors);
-
-	enable_IO_APIC();
-
-	io_apic_irqs = ~PIC_IRQS;
-
-	printk("ENABLING IO-APIC IRQs\n");
-
-	/*
-	 * Set up IO-APIC IRQ routing.
-	 */
-	if (!acpi_ioapic)
-		setup_ioapic_ids_from_mpc();
-	sync_Arb_IDs();
-	setup_IO_APIC_irqs();
-	init_IO_APIC_traps();
-	check_timer();
-	if (!acpi_ioapic)
-		print_IO_APIC();
-}
-
-/*
- *	Called after all the initialization is done. If we didnt find any
- *	APIC bugs then we can allow the modify fast path
- */
-
-static int __init io_apic_bug_finalize(void)
-{
-	if (sis_apic_bug == -1)
-		sis_apic_bug = 0;
-	return 0;
-}
-
-late_initcall(io_apic_bug_finalize);
-
-struct sysfs_ioapic_data {
-	struct sys_device dev;
-	struct IO_APIC_route_entry entry[0];
-};
-static struct sysfs_ioapic_data *mp_ioapic_data[MAX_IO_APICS];
-
-static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct IO_APIC_route_entry *entry;
-	struct sysfs_ioapic_data *data;
-	int i;
-
-	data = container_of(dev, struct sysfs_ioapic_data, dev);
-	entry = data->entry;
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
-		entry[i] = ioapic_read_entry(dev->id, i);
-
-	return 0;
-}
-
-static int ioapic_resume(struct sys_device *dev)
-{
-	struct IO_APIC_route_entry *entry;
-	struct sysfs_ioapic_data *data;
-	unsigned long flags;
-	union IO_APIC_reg_00 reg_00;
-	int i;
-
-	data = container_of(dev, struct sysfs_ioapic_data, dev);
-	entry = data->entry;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(dev->id, 0);
-	if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
-		reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
-		io_apic_write(dev->id, 0, reg_00.raw);
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
-		ioapic_write_entry(dev->id, i, entry[i]);
-
-	return 0;
-}
-
-static struct sysdev_class ioapic_sysdev_class = {
-	.name = "ioapic",
-	.suspend = ioapic_suspend,
-	.resume = ioapic_resume,
-};
-
-static int __init ioapic_init_sysfs(void)
-{
-	struct sys_device *dev;
-	int i, size, error = 0;
-
-	error = sysdev_class_register(&ioapic_sysdev_class);
-	if (error)
-		return error;
-
-	for (i = 0; i < nr_ioapics; i++) {
-		size = sizeof(struct sys_device) + nr_ioapic_registers[i]
-			* sizeof(struct IO_APIC_route_entry);
-		mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
-		if (!mp_ioapic_data[i]) {
-			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
-			continue;
-		}
-		dev = &mp_ioapic_data[i]->dev;
-		dev->id = i;
-		dev->cls = &ioapic_sysdev_class;
-		error = sysdev_register(dev);
-		if (error) {
-			kfree(mp_ioapic_data[i]);
-			mp_ioapic_data[i] = NULL;
-			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
-			continue;
-		}
-	}
-
-	return 0;
-}
-
-device_initcall(ioapic_init_sysfs);
-
-/*
- * Dynamic irq allocate and deallocation
- */
-int create_irq(void)
-{
-	/* Allocate an unused irq */
-	int irq, new, vector = 0;
-	unsigned long flags;
-
-	irq = -ENOSPC;
-	spin_lock_irqsave(&vector_lock, flags);
-	for (new = (NR_IRQS - 1); new >= 0; new--) {
-		if (platform_legacy_irq(new))
-			continue;
-		if (irq_vector[new] != 0)
-			continue;
-		vector = __assign_irq_vector(new);
-		if (likely(vector > 0))
-			irq = new;
-		break;
-	}
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	if (irq >= 0) {
-		set_intr_gate(vector, interrupt[irq]);
-		dynamic_irq_init(irq);
-	}
-	return irq;
-}
-
-void destroy_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	dynamic_irq_cleanup(irq);
-
-	spin_lock_irqsave(&vector_lock, flags);
-	clear_bit(irq_vector[irq], used_vectors);
-	irq_vector[irq] = 0;
-	spin_unlock_irqrestore(&vector_lock, flags);
-}
-
-/*
- * MSI message composition
- */
-#ifdef CONFIG_PCI_MSI
-static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
-{
-	int vector;
-	unsigned dest;
-
-	vector = assign_irq_vector(irq);
-	if (vector >= 0) {
-		dest = cpu_mask_to_apicid(TARGET_CPUS);
-
-		msg->address_hi = MSI_ADDR_BASE_HI;
-		msg->address_lo =
-			MSI_ADDR_BASE_LO |
-			((INT_DEST_MODE == 0) ?
-MSI_ADDR_DEST_MODE_PHYSICAL:
-				MSI_ADDR_DEST_MODE_LOGICAL) |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				MSI_ADDR_REDIRECTION_CPU:
-				MSI_ADDR_REDIRECTION_LOWPRI) |
-			MSI_ADDR_DEST_ID(dest);
-
-		msg->data =
-			MSI_DATA_TRIGGER_EDGE |
-			MSI_DATA_LEVEL_ASSERT |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-MSI_DATA_DELIVERY_FIXED:
-				MSI_DATA_DELIVERY_LOWPRI) |
-			MSI_DATA_VECTOR(vector);
-	}
-	return vector;
-}
-
-#ifdef CONFIG_SMP
-static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
-{
-	struct msi_msg msg;
-	unsigned int dest;
-	cpumask_t tmp;
-	int vector;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		tmp = TARGET_CPUS;
-
-	vector = assign_irq_vector(irq);
-	if (vector < 0)
-		return;
-
-	dest = cpu_mask_to_apicid(mask);
-
-	read_msi_msg(irq, &msg);
-
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
-	write_msi_msg(irq, &msg);
-	irq_desc[irq].affinity = mask;
-}
-#endif /* CONFIG_SMP */
-
-/*
- * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
- * which implement the MSI or MSI-X Capability Structure.
- */
-static struct irq_chip msi_chip = {
-	.name		= "PCI-MSI",
-	.unmask		= unmask_msi_irq,
-	.mask		= mask_msi_irq,
-	.ack		= ack_ioapic_irq,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_msi_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_msg msg;
-	int irq, ret;
-	irq = create_irq();
-	if (irq < 0)
-		return irq;
-
-	ret = msi_compose_msg(dev, irq, &msg);
-	if (ret < 0) {
-		destroy_irq(irq);
-		return ret;
-	}
-
-	set_irq_msi(irq, desc);
-	write_msi_msg(irq, &msg);
-
-	set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq,
-				      "edge");
-
-	return 0;
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	destroy_irq(irq);
-}
-
-#endif /* CONFIG_PCI_MSI */
-
-/*
- * Hypertransport interrupt support
- */
-#ifdef CONFIG_HT_IRQ
-
-#ifdef CONFIG_SMP
-
-static void target_ht_irq(unsigned int irq, unsigned int dest)
-{
-	struct ht_irq_msg msg;
-	fetch_ht_irq_msg(irq, &msg);
-
-	msg.address_lo &= ~(HT_IRQ_LOW_DEST_ID_MASK);
-	msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
-
-	msg.address_lo |= HT_IRQ_LOW_DEST_ID(dest);
-	msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
-
-	write_ht_irq_msg(irq, &msg);
-}
-
-static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
-{
-	unsigned int dest;
-	cpumask_t tmp;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		tmp = TARGET_CPUS;
-
-	cpus_and(mask, tmp, CPU_MASK_ALL);
-
-	dest = cpu_mask_to_apicid(mask);
-
-	target_ht_irq(irq, dest);
-	irq_desc[irq].affinity = mask;
-}
-#endif
-
-static struct irq_chip ht_irq_chip = {
-	.name		= "PCI-HT",
-	.mask		= mask_ht_irq,
-	.unmask		= unmask_ht_irq,
-	.ack		= ack_ioapic_irq,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_ht_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
-{
-	int vector;
-
-	vector = assign_irq_vector(irq);
-	if (vector >= 0) {
-		struct ht_irq_msg msg;
-		unsigned dest;
-		cpumask_t tmp;
-
-		cpus_clear(tmp);
-		cpu_set(vector >> 8, tmp);
-		dest = cpu_mask_to_apicid(tmp);
-
-		msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
-
-		msg.address_lo =
-			HT_IRQ_LOW_BASE |
-			HT_IRQ_LOW_DEST_ID(dest) |
-			HT_IRQ_LOW_VECTOR(vector) |
-			((INT_DEST_MODE == 0) ?
-				HT_IRQ_LOW_DM_PHYSICAL :
-				HT_IRQ_LOW_DM_LOGICAL) |
-			HT_IRQ_LOW_RQEOI_EDGE |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				HT_IRQ_LOW_MT_FIXED :
-				HT_IRQ_LOW_MT_ARBITRATED) |
-			HT_IRQ_LOW_IRQ_MASKED;
-
-		write_ht_irq_msg(irq, &msg);
-
-		set_irq_chip_and_handler_name(irq, &ht_irq_chip,
-					      handle_edge_irq, "edge");
-	}
-	return vector;
-}
-#endif /* CONFIG_HT_IRQ */
-
-/* --------------------------------------------------------------------------
-			ACPI-based IOAPIC Configuration
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-int __init io_apic_get_unique_id(int ioapic, int apic_id)
-{
-	union IO_APIC_reg_00 reg_00;
-	static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
-	physid_mask_t tmp;
-	unsigned long flags;
-	int i = 0;
-
-	/*
-	 * The P4 platform supports up to 256 APIC IDs on two separate APIC
-	 * buses (one for LAPICs, one for IOAPICs), where predecessors only
-	 * supports up to 16 on one shared APIC bus.
-	 *
-	 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
-	 *      advantage of new APIC bus architecture.
-	 */
-
-	if (physids_empty(apic_id_map))
-		apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(ioapic, 0);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	if (apic_id >= get_physical_broadcast()) {
-		printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
-			"%d\n", ioapic, apic_id, reg_00.bits.ID);
-		apic_id = reg_00.bits.ID;
-	}
-
-	/*
-	 * Every APIC in a system must have a unique ID or we get lots of nice
-	 * 'stuck on smp_invalidate_needed IPI wait' messages.
-	 */
-	if (check_apicid_used(apic_id_map, apic_id)) {
-
-		for (i = 0; i < get_physical_broadcast(); i++) {
-			if (!check_apicid_used(apic_id_map, i))
-				break;
-		}
-
-		if (i == get_physical_broadcast())
-			panic("Max apic_id exceeded!\n");
-
-		printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
-			"trying %d\n", ioapic, apic_id, i);
-
-		apic_id = i;
-	}
-
-	tmp = apicid_to_cpu_present(apic_id);
-	physids_or(apic_id_map, apic_id_map, tmp);
-
-	if (reg_00.bits.ID != apic_id) {
-		reg_00.bits.ID = apic_id;
-
-		spin_lock_irqsave(&ioapic_lock, flags);
-		io_apic_write(ioapic, 0, reg_00.raw);
-		reg_00.raw = io_apic_read(ioapic, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-
-		/* Sanity check */
-		if (reg_00.bits.ID != apic_id) {
-			printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
-			return -1;
-		}
-	}
-
-	apic_printk(APIC_VERBOSE, KERN_INFO
-			"IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
-
-	return apic_id;
-}
-
-
-int __init io_apic_get_version(int ioapic)
-{
-	union IO_APIC_reg_01	reg_01;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_01.raw = io_apic_read(ioapic, 1);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return reg_01.bits.version;
-}
-
-
-int __init io_apic_get_redir_entries(int ioapic)
-{
-	union IO_APIC_reg_01	reg_01;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_01.raw = io_apic_read(ioapic, 1);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return reg_01.bits.entries;
-}
-
-
-int io_apic_set_pci_routing(int ioapic, int pin, int irq, int edge_level, int active_high_low)
-{
-	struct IO_APIC_route_entry entry;
-
-	if (!IO_APIC_IRQ(irq)) {
-		printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
-			ioapic);
-		return -EINVAL;
-	}
-
-	/*
-	 * Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
-	 * Note that we mask (disable) IRQs now -- these get enabled when the
-	 * corresponding device driver registers for this IRQ.
-	 */
-
-	memset(&entry, 0, sizeof(entry));
-
-	entry.delivery_mode = INT_DELIVERY_MODE;
-	entry.dest_mode = INT_DEST_MODE;
-	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
-	entry.trigger = edge_level;
-	entry.polarity = active_high_low;
-	entry.mask  = 1;
-
-	/*
-	 * IRQs < 16 are already in the irq_2_pin[] map
-	 */
-	if (irq >= 16)
-		add_pin_to_irq(irq, ioapic, pin);
-
-	entry.vector = assign_irq_vector(irq);
-
-	apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry "
-		"(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic,
-		mp_ioapics[ioapic].mp_apicid, pin, entry.vector, irq,
-		edge_level, active_high_low);
-
-	ioapic_register_intr(irq, entry.vector, edge_level);
-
-	if (!ioapic && (irq < 16))
-		disable_8259A_irq(irq);
-
-	ioapic_write_entry(ioapic, pin, entry);
-
-	return 0;
-}
-
-int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
-{
-	int i;
-
-	if (skip_ioapic_setup)
-		return -1;
-
-	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mp_irqtype == mp_INT &&
-		    mp_irqs[i].mp_srcbusirq == bus_irq)
-			break;
-	if (i >= mp_irq_entries)
-		return -1;
-
-	*trigger = irq_trigger(i);
-	*polarity = irq_polarity(i);
-	return 0;
-}
-
-#endif /* CONFIG_ACPI */
-
-static int __init parse_disable_timer_pin_1(char *arg)
-{
-	disable_timer_pin_1 = 1;
-	return 0;
-}
-early_param("disable_timer_pin_1", parse_disable_timer_pin_1);
-
-static int __init parse_enable_timer_pin_1(char *arg)
-{
-	disable_timer_pin_1 = -1;
-	return 0;
-}
-early_param("enable_timer_pin_1", parse_enable_timer_pin_1);
-
-static int __init parse_noapic(char *arg)
-{
-	/* disable IO-APIC */
-	disable_ioapic_setup();
-	return 0;
-}
-early_param("noapic", parse_noapic);
-
-void __init ioapic_init_mappings(void)
-{
-	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
-	int i;
-
-	for (i = 0; i < nr_ioapics; i++) {
-		if (smp_found_config) {
-			ioapic_phys = mp_ioapics[i].mp_apicaddr;
-			if (!ioapic_phys) {
-				printk(KERN_ERR
-				       "WARNING: bogus zero IO-APIC "
-				       "address found in MPTABLE, "
-				       "disabling IO/APIC support!\n");
-				smp_found_config = 0;
-				skip_ioapic_setup = 1;
-				goto fake_ioapic_page;
-			}
-		} else {
-fake_ioapic_page:
-			ioapic_phys = (unsigned long)
-				      alloc_bootmem_pages(PAGE_SIZE);
-			ioapic_phys = __pa(ioapic_phys);
-		}
-		set_fixmap_nocache(idx, ioapic_phys);
-		printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
-		       __fix_to_virt(idx), ioapic_phys);
-		idx++;
-	}
-}
-
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
deleted file mode 100644
index 61a83b7..0000000
--- a/arch/x86/kernel/io_apic_64.c
+++ /dev/null
@@ -1,2431 +0,0 @@
-/*
- *	Intel IO-APIC support for multi-Pentium hosts.
- *
- *	Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
- *
- *	Many thanks to Stig Venaas for trying out countless experimental
- *	patches and reporting/debugging problems patiently!
- *
- *	(c) 1999, Multiple IO-APIC support, developed by
- *	Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
- *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
- *	further tested and cleaned up by Zach Brown <zab@redhat.com>
- *	and Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
- *					thanks to Eric Gilmore
- *					and Rolf G. Tews
- *					for testing these extensively
- *	Paul Diefenbaugh	:	Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/mc146818rtc.h>
-#include <linux/acpi.h>
-#include <linux/sysdev.h>
-#include <linux/msi.h>
-#include <linux/htirq.h>
-#include <linux/dmar.h>
-#include <linux/jiffies.h>
-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-#endif
-#include <linux/bootmem.h>
-
-#include <asm/idle.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/desc.h>
-#include <asm/proto.h>
-#include <asm/acpi.h>
-#include <asm/dma.h>
-#include <asm/i8259.h>
-#include <asm/nmi.h>
-#include <asm/msidef.h>
-#include <asm/hypertransport.h>
-
-#include <mach_ipi.h>
-#include <mach_apic.h>
-
-struct irq_cfg {
-	cpumask_t domain;
-	cpumask_t old_domain;
-	unsigned move_cleanup_count;
-	u8 vector;
-	u8 move_in_progress : 1;
-};
-
-/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
-static struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
-	[0]  = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR,  },
-	[1]  = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR,  },
-	[2]  = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR,  },
-	[3]  = { .domain = CPU_MASK_ALL, .vector = IRQ3_VECTOR,  },
-	[4]  = { .domain = CPU_MASK_ALL, .vector = IRQ4_VECTOR,  },
-	[5]  = { .domain = CPU_MASK_ALL, .vector = IRQ5_VECTOR,  },
-	[6]  = { .domain = CPU_MASK_ALL, .vector = IRQ6_VECTOR,  },
-	[7]  = { .domain = CPU_MASK_ALL, .vector = IRQ7_VECTOR,  },
-	[8]  = { .domain = CPU_MASK_ALL, .vector = IRQ8_VECTOR,  },
-	[9]  = { .domain = CPU_MASK_ALL, .vector = IRQ9_VECTOR,  },
-	[10] = { .domain = CPU_MASK_ALL, .vector = IRQ10_VECTOR, },
-	[11] = { .domain = CPU_MASK_ALL, .vector = IRQ11_VECTOR, },
-	[12] = { .domain = CPU_MASK_ALL, .vector = IRQ12_VECTOR, },
-	[13] = { .domain = CPU_MASK_ALL, .vector = IRQ13_VECTOR, },
-	[14] = { .domain = CPU_MASK_ALL, .vector = IRQ14_VECTOR, },
-	[15] = { .domain = CPU_MASK_ALL, .vector = IRQ15_VECTOR, },
-};
-
-static int assign_irq_vector(int irq, cpumask_t mask);
-
-int first_system_vector = 0xfe;
-
-char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
-
-#define __apicdebuginit  __init
-
-int sis_apic_bug; /* not actually supported, dummy for compile */
-
-static int no_timer_check;
-
-static int disable_timer_pin_1 __initdata;
-
-int timer_through_8259 __initdata;
-
-/* Where if anywhere is the i8259 connect in external int mode */
-static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
-
-static DEFINE_SPINLOCK(ioapic_lock);
-static DEFINE_SPINLOCK(vector_lock);
-
-/*
- * # of IRQ routing registers
- */
-int nr_ioapic_registers[MAX_IO_APICS];
-
-/* I/O APIC entries */
-struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
-int nr_ioapics;
-
-/* MP IRQ source entries */
-struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
-
-/* # of MP IRQ source entries */
-int mp_irq_entries;
-
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-
-/*
- * Rough estimation of how many shared IRQs there are, can
- * be changed anytime.
- */
-#define MAX_PLUS_SHARED_IRQS NR_IRQS
-#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
-
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * the indexing order of this array favors 1:1 mappings
- * between pins and IRQs.
- */
-
-static struct irq_pin_list {
-	short apic, pin, next;
-} irq_2_pin[PIN_MAP_SIZE];
-
-struct io_apic {
-	unsigned int index;
-	unsigned int unused[3];
-	unsigned int data;
-};
-
-static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
-{
-	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
-		+ (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
-}
-
-static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(reg, &io_apic->index);
-	return readl(&io_apic->data);
-}
-
-static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(reg, &io_apic->index);
-	writel(value, &io_apic->data);
-}
-
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- */
-static inline void io_apic_modify(unsigned int apic, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(value, &io_apic->data);
-}
-
-static bool io_apic_level_ack_pending(unsigned int irq)
-{
-	struct irq_pin_list *entry;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	entry = irq_2_pin + irq;
-	for (;;) {
-		unsigned int reg;
-		int pin;
-
-		pin = entry->pin;
-		if (pin == -1)
-			break;
-		reg = io_apic_read(entry->apic, 0x10 + pin*2);
-		/* Is the remote IRR bit set? */
-		if (reg & IO_APIC_REDIR_REMOTE_IRR) {
-			spin_unlock_irqrestore(&ioapic_lock, flags);
-			return true;
-		}
-		if (!entry->next)
-			break;
-		entry = irq_2_pin + entry->next;
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return false;
-}
-
-/*
- * Synchronize the IO-APIC and the CPU by doing
- * a dummy read from the IO-APIC
- */
-static inline void io_apic_sync(unsigned int apic)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	readl(&io_apic->data);
-}
-
-#define __DO_ACTION(R, ACTION, FINAL)					\
-									\
-{									\
-	int pin;							\
-	struct irq_pin_list *entry = irq_2_pin + irq;			\
-									\
-	BUG_ON(irq >= NR_IRQS);						\
-	for (;;) {							\
-		unsigned int reg;					\
-		pin = entry->pin;					\
-		if (pin == -1)						\
-			break;						\
-		reg = io_apic_read(entry->apic, 0x10 + R + pin*2);	\
-		reg ACTION;						\
-		io_apic_modify(entry->apic, reg);			\
-		FINAL;							\
-		if (!entry->next)					\
-			break;						\
-		entry = irq_2_pin + entry->next;			\
-	}								\
-}
-
-union entry_union {
-	struct { u32 w1, w2; };
-	struct IO_APIC_route_entry entry;
-};
-
-static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
-{
-	union entry_union eu;
-	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
-	eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	return eu.entry;
-}
-
-/*
- * When we write a new IO APIC routing entry, we need to write the high
- * word first! If the mask bit in the low word is clear, we will enable
- * the interrupt, and we need to make sure the entry is fully populated
- * before that happens.
- */
-static void
-__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
-{
-	union entry_union eu;
-	eu.entry = e;
-	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
-}
-
-static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__ioapic_write_entry(apic, pin, e);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-/*
- * When we mask an IO APIC routing entry, we need to write the low
- * word first, in order to set the mask bit before we change the
- * high bits!
- */
-static void ioapic_mask_entry(int apic, int pin)
-{
-	unsigned long flags;
-	union entry_union eu = { .entry.mask = 1 };
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
-	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-#ifdef CONFIG_SMP
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
-{
-	int apic, pin;
-	struct irq_pin_list *entry = irq_2_pin + irq;
-
-	BUG_ON(irq >= NR_IRQS);
-	for (;;) {
-		unsigned int reg;
-		apic = entry->apic;
-		pin = entry->pin;
-		if (pin == -1)
-			break;
-		io_apic_write(apic, 0x11 + pin*2, dest);
-		reg = io_apic_read(apic, 0x10 + pin*2);
-		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
-		reg |= vector;
-		io_apic_modify(apic, reg);
-		if (!entry->next)
-			break;
-		entry = irq_2_pin + entry->next;
-	}
-}
-
-static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	unsigned long flags;
-	unsigned int dest;
-	cpumask_t tmp;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	/*
-	 * Only the high 8 bits are valid.
-	 */
-	dest = SET_APIC_LOGICAL_ID(dest);
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__target_IO_APIC_irq(irq, dest, cfg->vector);
-	irq_desc[irq].affinity = mask;
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-#endif
-
-/*
- * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
- * shared ISA-space IRQs, so we have to support them. We are super
- * fast in the common case, and fast for shared ISA-space IRQs.
- */
-static void add_pin_to_irq(unsigned int irq, int apic, int pin)
-{
-	static int first_free_entry = NR_IRQS;
-	struct irq_pin_list *entry = irq_2_pin + irq;
-
-	BUG_ON(irq >= NR_IRQS);
-	while (entry->next)
-		entry = irq_2_pin + entry->next;
-
-	if (entry->pin != -1) {
-		entry->next = first_free_entry;
-		entry = irq_2_pin + entry->next;
-		if (++first_free_entry >= PIN_MAP_SIZE)
-			panic("io_apic.c: ran out of irq_2_pin entries!");
-	}
-	entry->apic = apic;
-	entry->pin = pin;
-}
-
-/*
- * Reroute an IRQ to a different pin.
- */
-static void __init replace_pin_at_irq(unsigned int irq,
-				      int oldapic, int oldpin,
-				      int newapic, int newpin)
-{
-	struct irq_pin_list *entry = irq_2_pin + irq;
-
-	while (1) {
-		if (entry->apic == oldapic && entry->pin == oldpin) {
-			entry->apic = newapic;
-			entry->pin = newpin;
-		}
-		if (!entry->next)
-			break;
-		entry = irq_2_pin + entry->next;
-	}
-}
-
-
-#define DO_ACTION(name,R,ACTION, FINAL)					\
-									\
-	static void name##_IO_APIC_irq (unsigned int irq)		\
-	__DO_ACTION(R, ACTION, FINAL)
-
-/* mask = 1 */
-DO_ACTION(__mask,	0, |= IO_APIC_REDIR_MASKED, io_apic_sync(entry->apic))
-
-/* mask = 0 */
-DO_ACTION(__unmask,	0, &= ~IO_APIC_REDIR_MASKED, )
-
-static void mask_IO_APIC_irq (unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__mask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void unmask_IO_APIC_irq (unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__unmask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
-{
-	struct IO_APIC_route_entry entry;
-
-	/* Check delivery_mode to be sure we're not clearing an SMI pin */
-	entry = ioapic_read_entry(apic, pin);
-	if (entry.delivery_mode == dest_SMI)
-		return;
-	/*
-	 * Disable it in the IO-APIC irq-routing table:
-	 */
-	ioapic_mask_entry(apic, pin);
-}
-
-static void clear_IO_APIC (void)
-{
-	int apic, pin;
-
-	for (apic = 0; apic < nr_ioapics; apic++)
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
-			clear_IO_APIC_pin(apic, pin);
-}
-
-int skip_ioapic_setup;
-int ioapic_force;
-
-static int __init parse_noapic(char *str)
-{
-	disable_ioapic_setup();
-	return 0;
-}
-early_param("noapic", parse_noapic);
-
-/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
-static int __init disable_timer_pin_setup(char *arg)
-{
-	disable_timer_pin_1 = 1;
-	return 1;
-}
-__setup("disable_timer_pin_1", disable_timer_pin_setup);
-
-
-/*
- * Find the IRQ entry number of a certain pin.
- */
-static int find_irq_entry(int apic, int pin, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mp_irqtype == type &&
-		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
-		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].mp_dstirq == pin)
-			return i;
-
-	return -1;
-}
-
-/*
- * Find the pin to which IRQ[irq] (ISA) is connected
- */
-static int __init find_isa_irq_pin(int irq, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
-
-		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mp_irqtype == type) &&
-		    (mp_irqs[i].mp_srcbusirq == irq))
-
-			return mp_irqs[i].mp_dstirq;
-	}
-	return -1;
-}
-
-static int __init find_isa_irq_apic(int irq, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
-
-		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mp_irqtype == type) &&
-		    (mp_irqs[i].mp_srcbusirq == irq))
-			break;
-	}
-	if (i < mp_irq_entries) {
-		int apic;
-		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
-				return apic;
-		}
-	}
-
-	return -1;
-}
-
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
-	int apic, i, best_guess = -1;
-
-	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
-		bus, slot, pin);
-	if (test_bit(bus, mp_bus_not_pci)) {
-		apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
-		return -1;
-	}
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
-
-		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
-			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
-				break;
-
-		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].mp_irqtype &&
-		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
-
-			if (!(apic || IO_APIC_IRQ(irq)))
-				continue;
-
-			if (pin == (mp_irqs[i].mp_srcbusirq & 3))
-				return irq;
-			/*
-			 * Use the first all-but-pin matching entry as a
-			 * best-guess fuzzy result for broken mptables.
-			 */
-			if (best_guess < 0)
-				best_guess = irq;
-		}
-	}
-	BUG_ON(best_guess >= NR_IRQS);
-	return best_guess;
-}
-
-/* ISA interrupts are always polarity zero edge triggered,
- * when listed as conforming in the MP table. */
-
-#define default_ISA_trigger(idx)	(0)
-#define default_ISA_polarity(idx)	(0)
-
-/* PCI interrupts are always polarity one level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_PCI_trigger(idx)	(1)
-#define default_PCI_polarity(idx)	(1)
-
-static int MPBIOS_polarity(int idx)
-{
-	int bus = mp_irqs[idx].mp_srcbus;
-	int polarity;
-
-	/*
-	 * Determine IRQ line polarity (high active or low active):
-	 */
-	switch (mp_irqs[idx].mp_irqflag & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent polarity */
-			if (test_bit(bus, mp_bus_not_pci))
-				polarity = default_ISA_polarity(idx);
-			else
-				polarity = default_PCI_polarity(idx);
-			break;
-		case 1: /* high active */
-		{
-			polarity = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-		case 3: /* low active */
-		{
-			polarity = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-	}
-	return polarity;
-}
-
-static int MPBIOS_trigger(int idx)
-{
-	int bus = mp_irqs[idx].mp_srcbus;
-	int trigger;
-
-	/*
-	 * Determine IRQ trigger mode (edge or level sensitive):
-	 */
-	switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent */
-			if (test_bit(bus, mp_bus_not_pci))
-				trigger = default_ISA_trigger(idx);
-			else
-				trigger = default_PCI_trigger(idx);
-			break;
-		case 1: /* edge */
-		{
-			trigger = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 1;
-			break;
-		}
-		case 3: /* level */
-		{
-			trigger = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 0;
-			break;
-		}
-	}
-	return trigger;
-}
-
-static inline int irq_polarity(int idx)
-{
-	return MPBIOS_polarity(idx);
-}
-
-static inline int irq_trigger(int idx)
-{
-	return MPBIOS_trigger(idx);
-}
-
-static int pin_2_irq(int idx, int apic, int pin)
-{
-	int irq, i;
-	int bus = mp_irqs[idx].mp_srcbus;
-
-	/*
-	 * Debugging check, we are in big trouble if this message pops up!
-	 */
-	if (mp_irqs[idx].mp_dstirq != pin)
-		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
-
-	if (test_bit(bus, mp_bus_not_pci)) {
-		irq = mp_irqs[idx].mp_srcbusirq;
-	} else {
-		/*
-		 * PCI IRQs are mapped in order
-		 */
-		i = irq = 0;
-		while (i < apic)
-			irq += nr_ioapic_registers[i++];
-		irq += pin;
-	}
-	BUG_ON(irq >= NR_IRQS);
-	return irq;
-}
-
-void lock_vector_lock(void)
-{
-	/* Used to the online set of cpus does not change
-	 * during assign_irq_vector.
-	 */
-	spin_lock(&vector_lock);
-}
-
-void unlock_vector_lock(void)
-{
-	spin_unlock(&vector_lock);
-}
-
-static int __assign_irq_vector(int irq, cpumask_t mask)
-{
-	/*
-	 * NOTE! The local APIC isn't very good at handling
-	 * multiple interrupts at the same interrupt level.
-	 * As the interrupt level is determined by taking the
-	 * vector number and shifting that right by 4, we
-	 * want to spread these out a bit so that they don't
-	 * all fall in the same interrupt level.
-	 *
-	 * Also, we've got to be careful not to trash gate
-	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
-	 */
-	static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
-	unsigned int old_vector;
-	int cpu;
-	struct irq_cfg *cfg;
-
-	BUG_ON((unsigned)irq >= NR_IRQS);
-	cfg = &irq_cfg[irq];
-
-	/* Only try and allocate irqs on cpus that are present */
-	cpus_and(mask, mask, cpu_online_map);
-
-	if ((cfg->move_in_progress) || cfg->move_cleanup_count)
-		return -EBUSY;
-
-	old_vector = cfg->vector;
-	if (old_vector) {
-		cpumask_t tmp;
-		cpus_and(tmp, cfg->domain, mask);
-		if (!cpus_empty(tmp))
-			return 0;
-	}
-
-	for_each_cpu_mask_nr(cpu, mask) {
-		cpumask_t domain, new_mask;
-		int new_cpu;
-		int vector, offset;
-
-		domain = vector_allocation_domain(cpu);
-		cpus_and(new_mask, domain, cpu_online_map);
-
-		vector = current_vector;
-		offset = current_offset;
-next:
-		vector += 8;
-		if (vector >= first_system_vector) {
-			/* If we run out of vectors on large boxen, must share them. */
-			offset = (offset + 1) % 8;
-			vector = FIRST_DEVICE_VECTOR + offset;
-		}
-		if (unlikely(current_vector == vector))
-			continue;
-		if (vector == IA32_SYSCALL_VECTOR)
-			goto next;
-		for_each_cpu_mask_nr(new_cpu, new_mask)
-			if (per_cpu(vector_irq, new_cpu)[vector] != -1)
-				goto next;
-		/* Found one! */
-		current_vector = vector;
-		current_offset = offset;
-		if (old_vector) {
-			cfg->move_in_progress = 1;
-			cfg->old_domain = cfg->domain;
-		}
-		for_each_cpu_mask_nr(new_cpu, new_mask)
-			per_cpu(vector_irq, new_cpu)[vector] = irq;
-		cfg->vector = vector;
-		cfg->domain = domain;
-		return 0;
-	}
-	return -ENOSPC;
-}
-
-static int assign_irq_vector(int irq, cpumask_t mask)
-{
-	int err;
-	unsigned long flags;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	err = __assign_irq_vector(irq, mask);
-	spin_unlock_irqrestore(&vector_lock, flags);
-	return err;
-}
-
-static void __clear_irq_vector(int irq)
-{
-	struct irq_cfg *cfg;
-	cpumask_t mask;
-	int cpu, vector;
-
-	BUG_ON((unsigned)irq >= NR_IRQS);
-	cfg = &irq_cfg[irq];
-	BUG_ON(!cfg->vector);
-
-	vector = cfg->vector;
-	cpus_and(mask, cfg->domain, cpu_online_map);
-	for_each_cpu_mask_nr(cpu, mask)
-		per_cpu(vector_irq, cpu)[vector] = -1;
-
-	cfg->vector = 0;
-	cpus_clear(cfg->domain);
-}
-
-void __setup_vector_irq(int cpu)
-{
-	/* Initialize vector_irq on a new cpu */
-	/* This function must be called with vector_lock held */
-	int irq, vector;
-
-	/* Mark the inuse vectors */
-	for (irq = 0; irq < NR_IRQS; ++irq) {
-		if (!cpu_isset(cpu, irq_cfg[irq].domain))
-			continue;
-		vector = irq_cfg[irq].vector;
-		per_cpu(vector_irq, cpu)[vector] = irq;
-	}
-	/* Mark the free vectors */
-	for (vector = 0; vector < NR_VECTORS; ++vector) {
-		irq = per_cpu(vector_irq, cpu)[vector];
-		if (irq < 0)
-			continue;
-		if (!cpu_isset(cpu, irq_cfg[irq].domain))
-			per_cpu(vector_irq, cpu)[vector] = -1;
-	}
-}
-
-static struct irq_chip ioapic_chip;
-
-static void ioapic_register_intr(int irq, unsigned long trigger)
-{
-	if (trigger) {
-		irq_desc[irq].status |= IRQ_LEVEL;
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					      handle_fasteoi_irq, "fasteoi");
-	} else {
-		irq_desc[irq].status &= ~IRQ_LEVEL;
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					      handle_edge_irq, "edge");
-	}
-}
-
-static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
-			      int trigger, int polarity)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	struct IO_APIC_route_entry entry;
-	cpumask_t mask;
-
-	if (!IO_APIC_IRQ(irq))
-		return;
-
-	mask = TARGET_CPUS;
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(mask, cfg->domain, mask);
-
-	apic_printk(APIC_VERBOSE,KERN_DEBUG
-		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
-		    "IRQ %d Mode:%i Active:%i)\n",
-		    apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
-		    irq, trigger, polarity);
-
-	/*
-	 * add it to the IO-APIC irq-routing table:
-	 */
-	memset(&entry,0,sizeof(entry));
-
-	entry.delivery_mode = INT_DELIVERY_MODE;
-	entry.dest_mode = INT_DEST_MODE;
-	entry.dest = cpu_mask_to_apicid(mask);
-	entry.mask = 0;				/* enable IRQ */
-	entry.trigger = trigger;
-	entry.polarity = polarity;
-	entry.vector = cfg->vector;
-
-	/* Mask level triggered irqs.
-	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
-	 */
-	if (trigger)
-		entry.mask = 1;
-
-	ioapic_register_intr(irq, trigger);
-	if (irq < 16)
-		disable_8259A_irq(irq);
-
-	ioapic_write_entry(apic, pin, entry);
-}
-
-static void __init setup_IO_APIC_irqs(void)
-{
-	int apic, pin, idx, irq, first_notcon = 1;
-
-	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-	for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-
-		idx = find_irq_entry(apic,pin,mp_INT);
-		if (idx == -1) {
-			if (first_notcon) {
-				apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin);
-				first_notcon = 0;
-			} else
-				apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin);
-			continue;
-		}
-		if (!first_notcon) {
-			apic_printk(APIC_VERBOSE, " not connected.\n");
-			first_notcon = 1;
-		}
-
-		irq = pin_2_irq(idx, apic, pin);
-		add_pin_to_irq(irq, apic, pin);
-
-		setup_IO_APIC_irq(apic, pin, irq,
-				  irq_trigger(idx), irq_polarity(idx));
-	}
-	}
-
-	if (!first_notcon)
-		apic_printk(APIC_VERBOSE, " not connected.\n");
-}
-
-/*
- * Set up the timer pin, possibly with the 8259A-master behind.
- */
-static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
-					int vector)
-{
-	struct IO_APIC_route_entry entry;
-
-	memset(&entry, 0, sizeof(entry));
-
-	/*
-	 * We use logical delivery to get the timer IRQ
-	 * to the first CPU.
-	 */
-	entry.dest_mode = INT_DEST_MODE;
-	entry.mask = 1;					/* mask IRQ now */
-	entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
-	entry.delivery_mode = INT_DELIVERY_MODE;
-	entry.polarity = 0;
-	entry.trigger = 0;
-	entry.vector = vector;
-
-	/*
-	 * The timer IRQ doesn't have to know that behind the
-	 * scene we may have a 8259A-master in AEOI mode ...
-	 */
-	set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
-
-	/*
-	 * Add it to the IO-APIC irq-routing table:
-	 */
-	ioapic_write_entry(apic, pin, entry);
-}
-
-void __apicdebuginit print_IO_APIC(void)
-{
-	int apic, i;
-	union IO_APIC_reg_00 reg_00;
-	union IO_APIC_reg_01 reg_01;
-	union IO_APIC_reg_02 reg_02;
-	unsigned long flags;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
-	for (i = 0; i < nr_ioapics; i++)
-		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
-		       mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
-
-	/*
-	 * We are a bit conservative about what we expect.  We have to
-	 * know about every hardware change ASAP.
-	 */
-	printk(KERN_INFO "testing the IO APIC.......................\n");
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(apic, 0);
-	reg_01.raw = io_apic_read(apic, 1);
-	if (reg_01.bits.version >= 0x10)
-		reg_02.raw = io_apic_read(apic, 2);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	printk("\n");
-	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
-	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
-	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
-
-	printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)&reg_01);
-	printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
-
-	printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
-	printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
-
-	if (reg_01.bits.version >= 0x10) {
-		printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
-		printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
-	}
-
-	printk(KERN_DEBUG ".... IRQ redirection table:\n");
-
-	printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
-			  " Stat Dmod Deli Vect:   \n");
-
-	for (i = 0; i <= reg_01.bits.entries; i++) {
-		struct IO_APIC_route_entry entry;
-
-		entry = ioapic_read_entry(apic, i);
-
-		printk(KERN_DEBUG " %02x %03X ",
-			i,
-			entry.dest
-		);
-
-		printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
-			entry.mask,
-			entry.trigger,
-			entry.irr,
-			entry.polarity,
-			entry.delivery_status,
-			entry.dest_mode,
-			entry.delivery_mode,
-			entry.vector
-		);
-	}
-	}
-	printk(KERN_DEBUG "IRQ to pin mappings:\n");
-	for (i = 0; i < NR_IRQS; i++) {
-		struct irq_pin_list *entry = irq_2_pin + i;
-		if (entry->pin < 0)
-			continue;
-		printk(KERN_DEBUG "IRQ%d ", i);
-		for (;;) {
-			printk("-> %d:%d", entry->apic, entry->pin);
-			if (!entry->next)
-				break;
-			entry = irq_2_pin + entry->next;
-		}
-		printk("\n");
-	}
-
-	printk(KERN_INFO ".................................... done.\n");
-
-	return;
-}
-
-#if 0
-
-static __apicdebuginit void print_APIC_bitfield (int base)
-{
-	unsigned int v;
-	int i, j;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
-	for (i = 0; i < 8; i++) {
-		v = apic_read(base + i*0x10);
-		for (j = 0; j < 32; j++) {
-			if (v & (1<<j))
-				printk("1");
-			else
-				printk("0");
-		}
-		printk("\n");
-	}
-}
-
-void __apicdebuginit print_local_APIC(void * dummy)
-{
-	unsigned int v, ver, maxlvt;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
-		smp_processor_id(), hard_smp_processor_id());
-	v = apic_read(APIC_ID);
-	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
-	v = apic_read(APIC_LVR);
-	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
-	ver = GET_APIC_VERSION(v);
-	maxlvt = lapic_get_maxlvt();
-
-	v = apic_read(APIC_TASKPRI);
-	printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
-
-	v = apic_read(APIC_ARBPRI);
-	printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
-		v & APIC_ARBPRI_MASK);
-	v = apic_read(APIC_PROCPRI);
-	printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
-
-	v = apic_read(APIC_EOI);
-	printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
-	v = apic_read(APIC_RRR);
-	printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
-	v = apic_read(APIC_LDR);
-	printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
-	v = apic_read(APIC_DFR);
-	printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
-	v = apic_read(APIC_SPIV);
-	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
-
-	printk(KERN_DEBUG "... APIC ISR field:\n");
-	print_APIC_bitfield(APIC_ISR);
-	printk(KERN_DEBUG "... APIC TMR field:\n");
-	print_APIC_bitfield(APIC_TMR);
-	printk(KERN_DEBUG "... APIC IRR field:\n");
-	print_APIC_bitfield(APIC_IRR);
-
-	v = apic_read(APIC_ESR);
-	printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
-
-	v = apic_read(APIC_ICR);
-	printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
-	v = apic_read(APIC_ICR2);
-	printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
-
-	v = apic_read(APIC_LVTT);
-	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
-
-	if (maxlvt > 3) {                       /* PC is LVT#4. */
-		v = apic_read(APIC_LVTPC);
-		printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
-	}
-	v = apic_read(APIC_LVT0);
-	printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
-	v = apic_read(APIC_LVT1);
-	printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
-
-	if (maxlvt > 2) {			/* ERR is LVT#3. */
-		v = apic_read(APIC_LVTERR);
-		printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
-	}
-
-	v = apic_read(APIC_TMICT);
-	printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
-	v = apic_read(APIC_TMCCT);
-	printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
-	v = apic_read(APIC_TDCR);
-	printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
-	printk("\n");
-}
-
-void print_all_local_APICs (void)
-{
-	on_each_cpu(print_local_APIC, NULL, 1);
-}
-
-void __apicdebuginit print_PIC(void)
-{
-	unsigned int v;
-	unsigned long flags;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "\nprinting PIC contents\n");
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	v = inb(0xa1) << 8 | inb(0x21);
-	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
-
-	v = inb(0xa0) << 8 | inb(0x20);
-	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
-
-	outb(0x0b,0xa0);
-	outb(0x0b,0x20);
-	v = inb(0xa0) << 8 | inb(0x20);
-	outb(0x0a,0xa0);
-	outb(0x0a,0x20);
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
-
-	v = inb(0x4d1) << 8 | inb(0x4d0);
-	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
-}
-
-#endif  /*  0  */
-
-void __init enable_IO_APIC(void)
-{
-	union IO_APIC_reg_01 reg_01;
-	int i8259_apic, i8259_pin;
-	int i, apic;
-	unsigned long flags;
-
-	for (i = 0; i < PIN_MAP_SIZE; i++) {
-		irq_2_pin[i].pin = -1;
-		irq_2_pin[i].next = 0;
-	}
-
-	/*
-	 * The number of IO-APIC IRQ registers (== #pins):
-	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(apic, 1);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
-	}
-	for(apic = 0; apic < nr_ioapics; apic++) {
-		int pin;
-		/* See if any of the pins is in ExtINT mode */
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			struct IO_APIC_route_entry entry;
-			entry = ioapic_read_entry(apic, pin);
-
-			/* If the interrupt line is enabled and in ExtInt mode
-			 * I have found the pin where the i8259 is connected.
-			 */
-			if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
-				ioapic_i8259.apic = apic;
-				ioapic_i8259.pin  = pin;
-				goto found_i8259;
-			}
-		}
-	}
- found_i8259:
-	/* Look to see what if the MP table has reported the ExtINT */
-	i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
-	i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
-	/* Trust the MP table if nothing is setup in the hardware */
-	if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
-		printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
-		ioapic_i8259.pin  = i8259_pin;
-		ioapic_i8259.apic = i8259_apic;
-	}
-	/* Complain if the MP table and the hardware disagree */
-	if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
-		(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
-	{
-		printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
-	}
-
-	/*
-	 * Do not trust the IO-APIC being empty at bootup
-	 */
-	clear_IO_APIC();
-}
-
-/*
- * Not an __init, needed by the reboot code
- */
-void disable_IO_APIC(void)
-{
-	/*
-	 * Clear the IO-APIC before rebooting:
-	 */
-	clear_IO_APIC();
-
-	/*
-	 * If the i8259 is routed through an IOAPIC
-	 * Put that IOAPIC in virtual wire mode
-	 * so legacy interrupts can be delivered.
-	 */
-	if (ioapic_i8259.pin != -1) {
-		struct IO_APIC_route_entry entry;
-
-		memset(&entry, 0, sizeof(entry));
-		entry.mask            = 0; /* Enabled */
-		entry.trigger         = 0; /* Edge */
-		entry.irr             = 0;
-		entry.polarity        = 0; /* High */
-		entry.delivery_status = 0;
-		entry.dest_mode       = 0; /* Physical */
-		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
-		entry.vector          = 0;
-		entry.dest          = GET_APIC_ID(read_apic_id());
-
-		/*
-		 * Add it to the IO-APIC irq-routing table:
-		 */
-		ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
-	}
-
-	disconnect_bsp_APIC(ioapic_i8259.pin != -1);
-}
-
-/*
- * There is a nasty bug in some older SMP boards, their mptable lies
- * about the timer IRQ. We do the following to work around the situation:
- *
- *	- timer IRQ defaults to IO-APIC IRQ
- *	- if this function detects that timer IRQs are defunct, then we fall
- *	  back to ISA timer IRQs
- */
-static int __init timer_irq_works(void)
-{
-	unsigned long t1 = jiffies;
-	unsigned long flags;
-
-	local_save_flags(flags);
-	local_irq_enable();
-	/* Let ten ticks pass... */
-	mdelay((10 * 1000) / HZ);
-	local_irq_restore(flags);
-
-	/*
-	 * Expect a few ticks at least, to be sure some possible
-	 * glue logic does not lock up after one or two first
-	 * ticks in a non-ExtINT mode.  Also the local APIC
-	 * might have cached one ExtINT interrupt.  Finally, at
-	 * least one tick may be lost due to delays.
-	 */
-
-	/* jiffies wrap? */
-	if (time_after(jiffies, t1 + 4))
-		return 1;
-	return 0;
-}
-
-/*
- * In the SMP+IOAPIC case it might happen that there are an unspecified
- * number of pending IRQ events unhandled. These cases are very rare,
- * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
- * better to do it this way as thus we do not have to be aware of
- * 'pending' interrupts in the IRQ path, except at this point.
- */
-/*
- * Edge triggered needs to resend any interrupt
- * that was delayed but this is now handled in the device
- * independent code.
- */
-
-/*
- * Starting up a edge-triggered IO-APIC interrupt is
- * nasty - we need to make sure that we get the edge.
- * If it is already asserted for some reason, we need
- * return 1 to indicate that is was pending.
- *
- * This is not complete - we should be able to fake
- * an edge even if it isn't on the 8259A...
- */
-
-static unsigned int startup_ioapic_irq(unsigned int irq)
-{
-	int was_pending = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	if (irq < 16) {
-		disable_8259A_irq(irq);
-		if (i8259A_irq_pending(irq))
-			was_pending = 1;
-	}
-	__unmask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return was_pending;
-}
-
-static int ioapic_retrigger_irq(unsigned int irq)
-{
-	struct irq_cfg *cfg = &irq_cfg[irq];
-	unsigned long flags;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector);
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	return 1;
-}
-
-/*
- * Level and edge triggered IO-APIC interrupts need different handling,
- * so we use two separate IRQ descriptors. Edge triggered IRQs can be
- * handled with the level-triggered descriptor, but that one has slightly
- * more overhead. Level-triggered interrupts cannot be handled with the
- * edge-triggered handler, without risking IRQ storms and other ugly
- * races.
- */
-
-#ifdef CONFIG_SMP
-asmlinkage void smp_irq_move_cleanup_interrupt(void)
-{
-	unsigned vector, me;
-	ack_APIC_irq();
-	exit_idle();
-	irq_enter();
-
-	me = smp_processor_id();
-	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
-		unsigned int irq;
-		struct irq_desc *desc;
-		struct irq_cfg *cfg;
-		irq = __get_cpu_var(vector_irq)[vector];
-		if (irq >= NR_IRQS)
-			continue;
-
-		desc = irq_desc + irq;
-		cfg = irq_cfg + irq;
-		spin_lock(&desc->lock);
-		if (!cfg->move_cleanup_count)
-			goto unlock;
-
-		if ((vector == cfg->vector) && cpu_isset(me, cfg->domain))
-			goto unlock;
-
-		__get_cpu_var(vector_irq)[vector] = -1;
-		cfg->move_cleanup_count--;
-unlock:
-		spin_unlock(&desc->lock);
-	}
-
-	irq_exit();
-}
-
-static void irq_complete_move(unsigned int irq)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	unsigned vector, me;
-
-	if (likely(!cfg->move_in_progress))
-		return;
-
-	vector = ~get_irq_regs()->orig_ax;
-	me = smp_processor_id();
-	if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) {
-		cpumask_t cleanup_mask;
-
-		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
-		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
-		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
-		cfg->move_in_progress = 0;
-	}
-}
-#else
-static inline void irq_complete_move(unsigned int irq) {}
-#endif
-
-static void ack_apic_edge(unsigned int irq)
-{
-	irq_complete_move(irq);
-	move_native_irq(irq);
-	ack_APIC_irq();
-}
-
-static void ack_apic_level(unsigned int irq)
-{
-	int do_unmask_irq = 0;
-
-	irq_complete_move(irq);
-#ifdef CONFIG_GENERIC_PENDING_IRQ
-	/* If we are moving the irq we need to mask it */
-	if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
-		do_unmask_irq = 1;
-		mask_IO_APIC_irq(irq);
-	}
-#endif
-
-	/*
-	 * We must acknowledge the irq before we move it or the acknowledge will
-	 * not propagate properly.
-	 */
-	ack_APIC_irq();
-
-	/* Now we can move and renable the irq */
-	if (unlikely(do_unmask_irq)) {
-		/* Only migrate the irq if the ack has been received.
-		 *
-		 * On rare occasions the broadcast level triggered ack gets
-		 * delayed going to ioapics, and if we reprogram the
-		 * vector while Remote IRR is still set the irq will never
-		 * fire again.
-		 *
-		 * To prevent this scenario we read the Remote IRR bit
-		 * of the ioapic.  This has two effects.
-		 * - On any sane system the read of the ioapic will
-		 *   flush writes (and acks) going to the ioapic from
-		 *   this cpu.
-		 * - We get to see if the ACK has actually been delivered.
-		 *
-		 * Based on failed experiments of reprogramming the
-		 * ioapic entry from outside of irq context starting
-		 * with masking the ioapic entry and then polling until
-		 * Remote IRR was clear before reprogramming the
-		 * ioapic I don't trust the Remote IRR bit to be
-		 * completey accurate.
-		 *
-		 * However there appears to be no other way to plug
-		 * this race, so if the Remote IRR bit is not
-		 * accurate and is causing problems then it is a hardware bug
-		 * and you can go talk to the chipset vendor about it.
-		 */
-		if (!io_apic_level_ack_pending(irq))
-			move_masked_irq(irq);
-		unmask_IO_APIC_irq(irq);
-	}
-}
-
-static struct irq_chip ioapic_chip __read_mostly = {
-	.name 		= "IO-APIC",
-	.startup 	= startup_ioapic_irq,
-	.mask	 	= mask_IO_APIC_irq,
-	.unmask	 	= unmask_IO_APIC_irq,
-	.ack 		= ack_apic_edge,
-	.eoi 		= ack_apic_level,
-#ifdef CONFIG_SMP
-	.set_affinity 	= set_ioapic_affinity_irq,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-static inline void init_IO_APIC_traps(void)
-{
-	int irq;
-
-	/*
-	 * NOTE! The local APIC isn't very good at handling
-	 * multiple interrupts at the same interrupt level.
-	 * As the interrupt level is determined by taking the
-	 * vector number and shifting that right by 4, we
-	 * want to spread these out a bit so that they don't
-	 * all fall in the same interrupt level.
-	 *
-	 * Also, we've got to be careful not to trash gate
-	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
-	 */
-	for (irq = 0; irq < NR_IRQS ; irq++) {
-		if (IO_APIC_IRQ(irq) && !irq_cfg[irq].vector) {
-			/*
-			 * Hmm.. We don't have an entry for this,
-			 * so default to an old-fashioned 8259
-			 * interrupt if we can..
-			 */
-			if (irq < 16)
-				make_8259A_irq(irq);
-			else
-				/* Strange. Oh, well.. */
-				irq_desc[irq].chip = &no_irq_chip;
-		}
-	}
-}
-
-static void unmask_lapic_irq(unsigned int irq)
-{
-	unsigned long v;
-
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
-}
-
-static void mask_lapic_irq(unsigned int irq)
-{
-	unsigned long v;
-
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
-}
-
-static void ack_lapic_irq (unsigned int irq)
-{
-	ack_APIC_irq();
-}
-
-static struct irq_chip lapic_chip __read_mostly = {
-	.name		= "local-APIC",
-	.mask		= mask_lapic_irq,
-	.unmask		= unmask_lapic_irq,
-	.ack		= ack_lapic_irq,
-};
-
-static void lapic_register_intr(int irq)
-{
-	irq_desc[irq].status &= ~IRQ_LEVEL;
-	set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
-				      "edge");
-}
-
-static void __init setup_nmi(void)
-{
-	/*
- 	 * Dirty trick to enable the NMI watchdog ...
-	 * We put the 8259A master into AEOI mode and
-	 * unmask on all local APICs LVT0 as NMI.
-	 *
-	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
-	 * is from Maciej W. Rozycki - so we do not have to EOI from
-	 * the NMI handler or the timer interrupt.
-	 */ 
-	printk(KERN_INFO "activating NMI Watchdog ...");
-
-	enable_NMI_through_LVT0();
-
-	printk(" done.\n");
-}
-
-/*
- * This looks a bit hackish but it's about the only one way of sending
- * a few INTA cycles to 8259As and any associated glue logic.  ICR does
- * not support the ExtINT mode, unfortunately.  We need to send these
- * cycles as some i82489DX-based boards have glue logic that keeps the
- * 8259A interrupt line asserted until INTA.  --macro
- */
-static inline void __init unlock_ExtINT_logic(void)
-{
-	int apic, pin, i;
-	struct IO_APIC_route_entry entry0, entry1;
-	unsigned char save_control, save_freq_select;
-
-	pin  = find_isa_irq_pin(8, mp_INT);
-	apic = find_isa_irq_apic(8, mp_INT);
-	if (pin == -1)
-		return;
-
-	entry0 = ioapic_read_entry(apic, pin);
-
-	clear_IO_APIC_pin(apic, pin);
-
-	memset(&entry1, 0, sizeof(entry1));
-
-	entry1.dest_mode = 0;			/* physical delivery */
-	entry1.mask = 0;			/* unmask IRQ now */
-	entry1.dest = hard_smp_processor_id();
-	entry1.delivery_mode = dest_ExtINT;
-	entry1.polarity = entry0.polarity;
-	entry1.trigger = 0;
-	entry1.vector = 0;
-
-	ioapic_write_entry(apic, pin, entry1);
-
-	save_control = CMOS_READ(RTC_CONTROL);
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
-		   RTC_FREQ_SELECT);
-	CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
-
-	i = 100;
-	while (i-- > 0) {
-		mdelay(10);
-		if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
-			i -= 10;
-	}
-
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	clear_IO_APIC_pin(apic, pin);
-
-	ioapic_write_entry(apic, pin, entry0);
-}
-
-/*
- * This code may look a bit paranoid, but it's supposed to cooperate with
- * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
- * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
- * fanatically on his truly buggy board.
- *
- * FIXME: really need to revamp this for modern platforms only.
- */
-static inline void __init check_timer(void)
-{
-	struct irq_cfg *cfg = irq_cfg + 0;
-	int apic1, pin1, apic2, pin2;
-	unsigned long flags;
-	int no_pin1 = 0;
-
-	local_irq_save(flags);
-
-	/*
-	 * get/set the timer IRQ vector:
-	 */
-	disable_8259A_irq(0);
-	assign_irq_vector(0, TARGET_CPUS);
-
-	/*
-	 * As IRQ0 is to be enabled in the 8259A, the virtual
-	 * wire has to be disabled in the local APIC.
-	 */
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-	init_8259A(1);
-
-	pin1  = find_isa_irq_pin(0, mp_INT);
-	apic1 = find_isa_irq_apic(0, mp_INT);
-	pin2  = ioapic_i8259.pin;
-	apic2 = ioapic_i8259.apic;
-
-	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
-		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		    cfg->vector, apic1, pin1, apic2, pin2);
-
-	/*
-	 * Some BIOS writers are clueless and report the ExtINTA
-	 * I/O APIC input from the cascaded 8259A as the timer
-	 * interrupt input.  So just in case, if only one pin
-	 * was found above, try it both directly and through the
-	 * 8259A.
-	 */
-	if (pin1 == -1) {
-		pin1 = pin2;
-		apic1 = apic2;
-		no_pin1 = 1;
-	} else if (pin2 == -1) {
-		pin2 = pin1;
-		apic2 = apic1;
-	}
-
-	if (pin1 != -1) {
-		/*
-		 * Ok, does IRQ0 through the IOAPIC work?
-		 */
-		if (no_pin1) {
-			add_pin_to_irq(0, apic1, pin1);
-			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
-		}
-		unmask_IO_APIC_irq(0);
-		if (!no_timer_check && timer_irq_works()) {
-			if (nmi_watchdog == NMI_IO_APIC) {
-				setup_nmi();
-				enable_8259A_irq(0);
-			}
-			if (disable_timer_pin_1 > 0)
-				clear_IO_APIC_pin(0, pin1);
-			goto out;
-		}
-		clear_IO_APIC_pin(apic1, pin1);
-		if (!no_pin1)
-			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
-				    "8254 timer not connected to IO-APIC\n");
-
-		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
-			    "(IRQ0) through the 8259A ...\n");
-		apic_printk(APIC_QUIET, KERN_INFO
-			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
-		/*
-		 * legacy devices should be connected to IO APIC #0
-		 */
-		replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
-		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
-		unmask_IO_APIC_irq(0);
-		enable_8259A_irq(0);
-		if (timer_irq_works()) {
-			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
-			timer_through_8259 = 1;
-			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
-				setup_nmi();
-				enable_8259A_irq(0);
-			}
-			goto out;
-		}
-		/*
-		 * Cleanup, just in case ...
-		 */
-		disable_8259A_irq(0);
-		clear_IO_APIC_pin(apic2, pin2);
-		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
-	}
-
-	if (nmi_watchdog == NMI_IO_APIC) {
-		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
-			    "through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = NMI_NONE;
-	}
-
-	apic_printk(APIC_QUIET, KERN_INFO
-		    "...trying to set up timer as Virtual Wire IRQ...\n");
-
-	lapic_register_intr(0);
-	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
-	enable_8259A_irq(0);
-
-	if (timer_irq_works()) {
-		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
-		goto out;
-	}
-	disable_8259A_irq(0);
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
-	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
-
-	apic_printk(APIC_QUIET, KERN_INFO
-		    "...trying to set up timer as ExtINT IRQ...\n");
-
-	init_8259A(0);
-	make_8259A_irq(0);
-	apic_write(APIC_LVT0, APIC_DM_EXTINT);
-
-	unlock_ExtINT_logic();
-
-	if (timer_irq_works()) {
-		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
-		goto out;
-	}
-	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
-	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
-		"report.  Then try booting with the 'noapic' option.\n");
-out:
-	local_irq_restore(flags);
-}
-
-static int __init notimercheck(char *s)
-{
-	no_timer_check = 1;
-	return 1;
-}
-__setup("no_timer_check", notimercheck);
-
-/*
- * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
- * to devices.  However there may be an I/O APIC pin available for
- * this interrupt regardless.  The pin may be left unconnected, but
- * typically it will be reused as an ExtINT cascade interrupt for
- * the master 8259A.  In the MPS case such a pin will normally be
- * reported as an ExtINT interrupt in the MP table.  With ACPI
- * there is no provision for ExtINT interrupts, and in the absence
- * of an override it would be treated as an ordinary ISA I/O APIC
- * interrupt, that is edge-triggered and unmasked by default.  We
- * used to do this, but it caused problems on some systems because
- * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
- * the same ExtINT cascade interrupt to drive the local APIC of the
- * bootstrap processor.  Therefore we refrain from routing IRQ2 to
- * the I/O APIC in all cases now.  No actual device should request
- * it anyway.  --macro
- */
-#define PIC_IRQS	(1<<2)
-
-void __init setup_IO_APIC(void)
-{
-
-	/*
-	 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
-	 */
-
-	io_apic_irqs = ~PIC_IRQS;
-
-	apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
-
-	sync_Arb_IDs();
-	setup_IO_APIC_irqs();
-	init_IO_APIC_traps();
-	check_timer();
-	if (!acpi_ioapic)
-		print_IO_APIC();
-}
-
-struct sysfs_ioapic_data {
-	struct sys_device dev;
-	struct IO_APIC_route_entry entry[0];
-};
-static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
-
-static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct IO_APIC_route_entry *entry;
-	struct sysfs_ioapic_data *data;
-	int i;
-
-	data = container_of(dev, struct sysfs_ioapic_data, dev);
-	entry = data->entry;
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
-		*entry = ioapic_read_entry(dev->id, i);
-
-	return 0;
-}
-
-static int ioapic_resume(struct sys_device *dev)
-{
-	struct IO_APIC_route_entry *entry;
-	struct sysfs_ioapic_data *data;
-	unsigned long flags;
-	union IO_APIC_reg_00 reg_00;
-	int i;
-
-	data = container_of(dev, struct sysfs_ioapic_data, dev);
-	entry = data->entry;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(dev->id, 0);
-	if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
-		reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
-		io_apic_write(dev->id, 0, reg_00.raw);
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
-		ioapic_write_entry(dev->id, i, entry[i]);
-
-	return 0;
-}
-
-static struct sysdev_class ioapic_sysdev_class = {
-	.name = "ioapic",
-	.suspend = ioapic_suspend,
-	.resume = ioapic_resume,
-};
-
-static int __init ioapic_init_sysfs(void)
-{
-	struct sys_device * dev;
-	int i, size, error;
-
-	error = sysdev_class_register(&ioapic_sysdev_class);
-	if (error)
-		return error;
-
-	for (i = 0; i < nr_ioapics; i++ ) {
-		size = sizeof(struct sys_device) + nr_ioapic_registers[i]
-			* sizeof(struct IO_APIC_route_entry);
-		mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
-		if (!mp_ioapic_data[i]) {
-			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
-			continue;
-		}
-		dev = &mp_ioapic_data[i]->dev;
-		dev->id = i;
-		dev->cls = &ioapic_sysdev_class;
-		error = sysdev_register(dev);
-		if (error) {
-			kfree(mp_ioapic_data[i]);
-			mp_ioapic_data[i] = NULL;
-			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
-			continue;
-		}
-	}
-
-	return 0;
-}
-
-device_initcall(ioapic_init_sysfs);
-
-/*
- * Dynamic irq allocate and deallocation
- */
-int create_irq(void)
-{
-	/* Allocate an unused irq */
-	int irq;
-	int new;
-	unsigned long flags;
-
-	irq = -ENOSPC;
-	spin_lock_irqsave(&vector_lock, flags);
-	for (new = (NR_IRQS - 1); new >= 0; new--) {
-		if (platform_legacy_irq(new))
-			continue;
-		if (irq_cfg[new].vector != 0)
-			continue;
-		if (__assign_irq_vector(new, TARGET_CPUS) == 0)
-			irq = new;
-		break;
-	}
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	if (irq >= 0) {
-		dynamic_irq_init(irq);
-	}
-	return irq;
-}
-
-void destroy_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	dynamic_irq_cleanup(irq);
-
-	spin_lock_irqsave(&vector_lock, flags);
-	__clear_irq_vector(irq);
-	spin_unlock_irqrestore(&vector_lock, flags);
-}
-
-/*
- * MSI message composition
- */
-#ifdef CONFIG_PCI_MSI
-static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	int err;
-	unsigned dest;
-	cpumask_t tmp;
-
-	tmp = TARGET_CPUS;
-	err = assign_irq_vector(irq, tmp);
-	if (!err) {
-		cpus_and(tmp, cfg->domain, tmp);
-		dest = cpu_mask_to_apicid(tmp);
-
-		msg->address_hi = MSI_ADDR_BASE_HI;
-		msg->address_lo =
-			MSI_ADDR_BASE_LO |
-			((INT_DEST_MODE == 0) ?
-				MSI_ADDR_DEST_MODE_PHYSICAL:
-				MSI_ADDR_DEST_MODE_LOGICAL) |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				MSI_ADDR_REDIRECTION_CPU:
-				MSI_ADDR_REDIRECTION_LOWPRI) |
-			MSI_ADDR_DEST_ID(dest);
-
-		msg->data =
-			MSI_DATA_TRIGGER_EDGE |
-			MSI_DATA_LEVEL_ASSERT |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				MSI_DATA_DELIVERY_FIXED:
-				MSI_DATA_DELIVERY_LOWPRI) |
-			MSI_DATA_VECTOR(cfg->vector);
-	}
-	return err;
-}
-
-#ifdef CONFIG_SMP
-static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	struct msi_msg msg;
-	unsigned int dest;
-	cpumask_t tmp;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	read_msi_msg(irq, &msg);
-
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
-	write_msi_msg(irq, &msg);
-	irq_desc[irq].affinity = mask;
-}
-#endif /* CONFIG_SMP */
-
-/*
- * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
- * which implement the MSI or MSI-X Capability Structure.
- */
-static struct irq_chip msi_chip = {
-	.name		= "PCI-MSI",
-	.unmask		= unmask_msi_irq,
-	.mask		= mask_msi_irq,
-	.ack		= ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_msi_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_msg msg;
-	int irq, ret;
-	irq = create_irq();
-	if (irq < 0)
-		return irq;
-
-	ret = msi_compose_msg(dev, irq, &msg);
-	if (ret < 0) {
-		destroy_irq(irq);
-		return ret;
-	}
-
-	set_irq_msi(irq, desc);
-	write_msi_msg(irq, &msg);
-
-	set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
-
-	return 0;
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	destroy_irq(irq);
-}
-
-#ifdef CONFIG_DMAR
-#ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	struct msi_msg msg;
-	unsigned int dest;
-	cpumask_t tmp;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	dmar_msi_read(irq, &msg);
-
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
-	dmar_msi_write(irq, &msg);
-	irq_desc[irq].affinity = mask;
-}
-#endif /* CONFIG_SMP */
-
-struct irq_chip dmar_msi_type = {
-	.name = "DMAR_MSI",
-	.unmask = dmar_msi_unmask,
-	.mask = dmar_msi_mask,
-	.ack = ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity = dmar_msi_set_affinity,
-#endif
-	.retrigger = ioapic_retrigger_irq,
-};
-
-int arch_setup_dmar_msi(unsigned int irq)
-{
-	int ret;
-	struct msi_msg msg;
-
-	ret = msi_compose_msg(NULL, irq, &msg);
-	if (ret < 0)
-		return ret;
-	dmar_msi_write(irq, &msg);
-	set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
-		"edge");
-	return 0;
-}
-#endif
-
-#endif /* CONFIG_PCI_MSI */
-/*
- * Hypertransport interrupt support
- */
-#ifdef CONFIG_HT_IRQ
-
-#ifdef CONFIG_SMP
-
-static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
-{
-	struct ht_irq_msg msg;
-	fetch_ht_irq_msg(irq, &msg);
-
-	msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
-	msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
-
-	msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
-	msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
-
-	write_ht_irq_msg(irq, &msg);
-}
-
-static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	unsigned int dest;
-	cpumask_t tmp;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	target_ht_irq(irq, dest, cfg->vector);
-	irq_desc[irq].affinity = mask;
-}
-#endif
-
-static struct irq_chip ht_irq_chip = {
-	.name		= "PCI-HT",
-	.mask		= mask_ht_irq,
-	.unmask		= unmask_ht_irq,
-	.ack		= ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_ht_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	int err;
-	cpumask_t tmp;
-
-	tmp = TARGET_CPUS;
-	err = assign_irq_vector(irq, tmp);
-	if (!err) {
-		struct ht_irq_msg msg;
-		unsigned dest;
-
-		cpus_and(tmp, cfg->domain, tmp);
-		dest = cpu_mask_to_apicid(tmp);
-
-		msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
-
-		msg.address_lo =
-			HT_IRQ_LOW_BASE |
-			HT_IRQ_LOW_DEST_ID(dest) |
-			HT_IRQ_LOW_VECTOR(cfg->vector) |
-			((INT_DEST_MODE == 0) ?
-				HT_IRQ_LOW_DM_PHYSICAL :
-				HT_IRQ_LOW_DM_LOGICAL) |
-			HT_IRQ_LOW_RQEOI_EDGE |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				HT_IRQ_LOW_MT_FIXED :
-				HT_IRQ_LOW_MT_ARBITRATED) |
-			HT_IRQ_LOW_IRQ_MASKED;
-
-		write_ht_irq_msg(irq, &msg);
-
-		set_irq_chip_and_handler_name(irq, &ht_irq_chip,
-					      handle_edge_irq, "edge");
-	}
-	return err;
-}
-#endif /* CONFIG_HT_IRQ */
-
-/* --------------------------------------------------------------------------
-                          ACPI-based IOAPIC Configuration
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-#define IO_APIC_MAX_ID		0xFE
-
-int __init io_apic_get_redir_entries (int ioapic)
-{
-	union IO_APIC_reg_01	reg_01;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_01.raw = io_apic_read(ioapic, 1);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return reg_01.bits.entries;
-}
-
-
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
-{
-	if (!IO_APIC_IRQ(irq)) {
-		apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
-			ioapic);
-		return -EINVAL;
-	}
-
-	/*
-	 * IRQs < 16 are already in the irq_2_pin[] map
-	 */
-	if (irq >= 16)
-		add_pin_to_irq(irq, ioapic, pin);
-
-	setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity);
-
-	return 0;
-}
-
-
-int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
-{
-	int i;
-
-	if (skip_ioapic_setup)
-		return -1;
-
-	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mp_irqtype == mp_INT &&
-		    mp_irqs[i].mp_srcbusirq == bus_irq)
-			break;
-	if (i >= mp_irq_entries)
-		return -1;
-
-	*trigger = irq_trigger(i);
-	*polarity = irq_polarity(i);
-	return 0;
-}
-
-#endif /* CONFIG_ACPI */
-
-/*
- * This function currently is only a helper for the i386 smp boot process where
- * we need to reprogram the ioredtbls to cater for the cpus which have come online
- * so mask in all cases should simply be TARGET_CPUS
- */
-#ifdef CONFIG_SMP
-void __init setup_ioapic_dest(void)
-{
-	int pin, ioapic, irq, irq_entry;
-
-	if (skip_ioapic_setup == 1)
-		return;
-
-	for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
-		for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
-			irq_entry = find_irq_entry(ioapic, pin, mp_INT);
-			if (irq_entry == -1)
-				continue;
-			irq = pin_2_irq(irq_entry, ioapic, pin);
-
-			/* setup_IO_APIC_irqs could fail to get vector for some device
-			 * when you have too many devices, because at that time only boot
-			 * cpu is online.
-			 */
-			if (!irq_cfg[irq].vector)
-				setup_IO_APIC_irq(ioapic, pin, irq,
-						  irq_trigger(irq_entry),
-						  irq_polarity(irq_entry));
-			else
-				set_ioapic_affinity_irq(irq, TARGET_CPUS);
-		}
-
-	}
-}
-#endif
-
-#define IOAPIC_RESOURCE_NAME_SIZE 11
-
-static struct resource *ioapic_resources;
-
-static struct resource * __init ioapic_setup_resources(void)
-{
-	unsigned long n;
-	struct resource *res;
-	char *mem;
-	int i;
-
-	if (nr_ioapics <= 0)
-		return NULL;
-
-	n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource);
-	n *= nr_ioapics;
-
-	mem = alloc_bootmem(n);
-	res = (void *)mem;
-
-	if (mem != NULL) {
-		mem += sizeof(struct resource) * nr_ioapics;
-
-		for (i = 0; i < nr_ioapics; i++) {
-			res[i].name = mem;
-			res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-			sprintf(mem,  "IOAPIC %u", i);
-			mem += IOAPIC_RESOURCE_NAME_SIZE;
-		}
-	}
-
-	ioapic_resources = res;
-
-	return res;
-}
-
-void __init ioapic_init_mappings(void)
-{
-	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
-	struct resource *ioapic_res;
-	int i;
-
-	ioapic_res = ioapic_setup_resources();
-	for (i = 0; i < nr_ioapics; i++) {
-		if (smp_found_config) {
-			ioapic_phys = mp_ioapics[i].mp_apicaddr;
-		} else {
-			ioapic_phys = (unsigned long)
-				alloc_bootmem_pages(PAGE_SIZE);
-			ioapic_phys = __pa(ioapic_phys);
-		}
-		set_fixmap_nocache(idx, ioapic_phys);
-		apic_printk(APIC_VERBOSE,
-			    "mapped IOAPIC to %016lx (%016lx)\n",
-			    __fix_to_virt(idx), ioapic_phys);
-		idx++;
-
-		if (ioapic_res != NULL) {
-			ioapic_res->start = ioapic_phys;
-			ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
-			ioapic_res++;
-		}
-	}
-}
-
-static int __init ioapic_insert_resources(void)
-{
-	int i;
-	struct resource *r = ioapic_resources;
-
-	if (!r) {
-		printk(KERN_ERR
-		       "IO APIC resources could be not be allocated.\n");
-		return -1;
-	}
-
-	for (i = 0; i < nr_ioapics; i++) {
-		insert_resource(&iomem_resource, r);
-		r++;
-	}
-
-	return 0;
-}
-
-/* Insert the IO APIC resources after PCI initialization has occured to handle
- * IO APICS that are mapped in on a BAR in PCI space. */
-late_initcall(ioapic_insert_resources);
-
diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c
index 50e5e4a..1919143 100644
--- a/arch/x86/kernel/ioport.c
+++ b/arch/x86/kernel/ioport.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/thread_info.h>
 #include <linux/syscalls.h>
+#include <asm/syscalls.h>
 
 /* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
 static void set_bitmap(unsigned long *bitmap, unsigned int base,
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 3f7537b..f1c688e 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -20,6 +20,8 @@
 
 #ifdef CONFIG_X86_32
 #include <mach_apic.h>
+#include <mach_ipi.h>
+
 /*
  * the following functions deal with sending IPIs between CPUs.
  *
@@ -147,7 +149,6 @@ void send_IPI_mask_sequence(cpumask_t mask, int vector)
 }
 
 /* must come after the send_IPI functions above for inlining */
-#include <mach_ipi.h>
 static int convert_apicid_to_cpu(int apic_id)
 {
 	int i;
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
new file mode 100644
index 0000000..d1d4dc5
--- /dev/null
+++ b/arch/x86/kernel/irq.c
@@ -0,0 +1,189 @@
+/*
+ * Common interrupt code for 32 and 64 bit
+ */
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+
+#include <asm/apic.h>
+#include <asm/io_apic.h>
+#include <asm/smp.h>
+
+atomic_t irq_err_count;
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	/*
+	 * Currently unexpected vectors happen only on SMP and APIC.
+	 * We _must_ ack these because every local APIC has only N
+	 * irq slots per priority level, and a 'hanging, unacked' IRQ
+	 * holds up an irq slot - in excessive cases (when multiple
+	 * unexpected vectors occur) that might lock up the APIC
+	 * completely.
+	 * But only ack when the APIC is enabled -AK
+	 */
+	if (cpu_has_apic)
+		ack_APIC_irq();
+#endif
+}
+
+#ifdef CONFIG_X86_32
+# define irq_stats(x)		(&per_cpu(irq_stat, x))
+#else
+# define irq_stats(x)		cpu_pda(x)
+#endif
+/*
+ * /proc/interrupts printing:
+ */
+static int show_other_interrupts(struct seq_file *p)
+{
+	int j;
+
+	seq_printf(p, "NMI: ");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->__nmi_count);
+	seq_printf(p, "  Non-maskable interrupts\n");
+#ifdef CONFIG_X86_LOCAL_APIC
+	seq_printf(p, "LOC: ");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->apic_timer_irqs);
+	seq_printf(p, "  Local timer interrupts\n");
+#endif
+#ifdef CONFIG_SMP
+	seq_printf(p, "RES: ");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count);
+	seq_printf(p, "  Rescheduling interrupts\n");
+	seq_printf(p, "CAL: ");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count);
+	seq_printf(p, "  Function call interrupts\n");
+	seq_printf(p, "TLB: ");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count);
+	seq_printf(p, "  TLB shootdowns\n");
+#endif
+#ifdef CONFIG_X86_MCE
+	seq_printf(p, "TRM: ");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_thermal_count);
+	seq_printf(p, "  Thermal event interrupts\n");
+# ifdef CONFIG_X86_64
+	seq_printf(p, "THR: ");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count);
+	seq_printf(p, "  Threshold APIC interrupts\n");
+# endif
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
+	seq_printf(p, "SPU: ");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_spurious_count);
+	seq_printf(p, "  Spurious interrupts\n");
+#endif
+	seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+#if defined(CONFIG_X86_IO_APIC)
+	seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
+#endif
+	return 0;
+}
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+	unsigned long flags, any_count = 0;
+	int i = *(loff_t *) v, j;
+	struct irqaction *action;
+	struct irq_desc *desc;
+
+	if (i > nr_irqs)
+		return 0;
+
+	if (i == nr_irqs)
+		return show_other_interrupts(p);
+
+	/* print header */
+	if (i == 0) {
+		seq_printf(p, "           ");
+		for_each_online_cpu(j)
+			seq_printf(p, "CPU%-8d", j);
+		seq_putc(p, '\n');
+	}
+
+	desc = irq_to_desc(i);
+	spin_lock_irqsave(&desc->lock, flags);
+#ifndef CONFIG_SMP
+	any_count = kstat_irqs(i);
+#else
+	for_each_online_cpu(j)
+		any_count |= kstat_irqs_cpu(i, j);
+#endif
+	action = desc->action;
+	if (!action && !any_count)
+		goto out;
+
+	seq_printf(p, "%3d: ", i);
+#ifndef CONFIG_SMP
+	seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
+#endif
+	seq_printf(p, " %8s", desc->chip->name);
+	seq_printf(p, "-%-8s", desc->name);
+
+	if (action) {
+		seq_printf(p, "  %s", action->name);
+		while ((action = action->next) != NULL)
+			seq_printf(p, ", %s", action->name);
+	}
+
+	seq_putc(p, '\n');
+out:
+	spin_unlock_irqrestore(&desc->lock, flags);
+	return 0;
+}
+
+/*
+ * /proc/stat helpers
+ */
+u64 arch_irq_stat_cpu(unsigned int cpu)
+{
+	u64 sum = irq_stats(cpu)->__nmi_count;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	sum += irq_stats(cpu)->apic_timer_irqs;
+#endif
+#ifdef CONFIG_SMP
+	sum += irq_stats(cpu)->irq_resched_count;
+	sum += irq_stats(cpu)->irq_call_count;
+	sum += irq_stats(cpu)->irq_tlb_count;
+#endif
+#ifdef CONFIG_X86_MCE
+	sum += irq_stats(cpu)->irq_thermal_count;
+# ifdef CONFIG_X86_64
+	sum += irq_stats(cpu)->irq_threshold_count;
+#endif
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
+	sum += irq_stats(cpu)->irq_spurious_count;
+#endif
+	return sum;
+}
+
+u64 arch_irq_stat(void)
+{
+	u64 sum = atomic_read(&irq_err_count);
+
+#ifdef CONFIG_X86_IO_APIC
+	sum += atomic_read(&irq_mis_count);
+#endif
+	return sum;
+}
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 1cf8c1f..a513826 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -25,29 +25,6 @@ EXPORT_PER_CPU_SYMBOL(irq_stat);
 DEFINE_PER_CPU(struct pt_regs *, irq_regs);
 EXPORT_PER_CPU_SYMBOL(irq_regs);
 
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	/*
-	 * Currently unexpected vectors happen only on SMP and APIC.
-	 * We _must_ ack these because every local APIC has only N
-	 * irq slots per priority level, and a 'hanging, unacked' IRQ
-	 * holds up an irq slot - in excessive cases (when multiple
-	 * unexpected vectors occur) that might lock up the APIC
-	 * completely.
-	 * But only ack when the APIC is enabled -AK
-	 */
-	if (cpu_has_apic)
-		ack_APIC_irq();
-#endif
-}
-
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 /* Debugging check for stack overflow: is there less than 1KB free? */
 static int check_stack_overflow(void)
@@ -223,20 +200,25 @@ unsigned int do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
 	/* high bit used in ret_from_ code */
-	int overflow, irq = ~regs->orig_ax;
-	struct irq_desc *desc = irq_desc + irq;
+	int overflow;
+	unsigned vector = ~regs->orig_ax;
+	struct irq_desc *desc;
+	unsigned irq;
 
-	if (unlikely((unsigned)irq >= NR_IRQS)) {
-		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
-					__func__, irq);
-		BUG();
-	}
 
 	old_regs = set_irq_regs(regs);
 	irq_enter();
+	irq = __get_cpu_var(vector_irq)[vector];
 
 	overflow = check_stack_overflow();
 
+	desc = irq_to_desc(irq);
+	if (unlikely(!desc)) {
+		printk(KERN_EMERG "%s: cannot handle IRQ %d vector %#x cpu %d\n",
+					__func__, irq, vector, smp_processor_id());
+		BUG();
+	}
+
 	if (!execute_on_irq_stack(overflow, desc, irq)) {
 		if (unlikely(overflow))
 			print_stack_overflow();
@@ -248,146 +230,6 @@ unsigned int do_IRQ(struct pt_regs *regs)
 	return 1;
 }
 
-/*
- * Interrupt statistics:
- */
-
-atomic_t irq_err_count;
-
-/*
- * /proc/interrupts printing:
- */
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int i = *(loff_t *) v, j;
-	struct irqaction * action;
-	unsigned long flags;
-
-	if (i == 0) {
-		seq_printf(p, "           ");
-		for_each_online_cpu(j)
-			seq_printf(p, "CPU%-8d",j);
-		seq_putc(p, '\n');
-	}
-
-	if (i < NR_IRQS) {
-		unsigned any_count = 0;
-
-		spin_lock_irqsave(&irq_desc[i].lock, flags);
-#ifndef CONFIG_SMP
-		any_count = kstat_irqs(i);
-#else
-		for_each_online_cpu(j)
-			any_count |= kstat_cpu(j).irqs[i];
-#endif
-		action = irq_desc[i].action;
-		if (!action && !any_count)
-			goto skip;
-		seq_printf(p, "%3d: ",i);
-#ifndef CONFIG_SMP
-		seq_printf(p, "%10u ", kstat_irqs(i));
-#else
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
-#endif
-		seq_printf(p, " %8s", irq_desc[i].chip->name);
-		seq_printf(p, "-%-8s", irq_desc[i].name);
-
-		if (action) {
-			seq_printf(p, "  %s", action->name);
-			while ((action = action->next) != NULL)
-				seq_printf(p, ", %s", action->name);
-		}
-
-		seq_putc(p, '\n');
-skip:
-		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-		seq_printf(p, "NMI: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", nmi_count(j));
-		seq_printf(p, "  Non-maskable interrupts\n");
-#ifdef CONFIG_X86_LOCAL_APIC
-		seq_printf(p, "LOC: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ",
-				per_cpu(irq_stat,j).apic_timer_irqs);
-		seq_printf(p, "  Local timer interrupts\n");
-#endif
-#ifdef CONFIG_SMP
-		seq_printf(p, "RES: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ",
-				per_cpu(irq_stat,j).irq_resched_count);
-		seq_printf(p, "  Rescheduling interrupts\n");
-		seq_printf(p, "CAL: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ",
-				per_cpu(irq_stat,j).irq_call_count);
-		seq_printf(p, "  function call interrupts\n");
-		seq_printf(p, "TLB: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ",
-				per_cpu(irq_stat,j).irq_tlb_count);
-		seq_printf(p, "  TLB shootdowns\n");
-#endif
-#ifdef CONFIG_X86_MCE
-		seq_printf(p, "TRM: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ",
-				per_cpu(irq_stat,j).irq_thermal_count);
-		seq_printf(p, "  Thermal event interrupts\n");
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
-		seq_printf(p, "SPU: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ",
-				per_cpu(irq_stat,j).irq_spurious_count);
-		seq_printf(p, "  Spurious interrupts\n");
-#endif
-		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-#if defined(CONFIG_X86_IO_APIC)
-		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
-#endif
-	}
-	return 0;
-}
-
-/*
- * /proc/stat helpers
- */
-u64 arch_irq_stat_cpu(unsigned int cpu)
-{
-	u64 sum = nmi_count(cpu);
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	sum += per_cpu(irq_stat, cpu).apic_timer_irqs;
-#endif
-#ifdef CONFIG_SMP
-	sum += per_cpu(irq_stat, cpu).irq_resched_count;
-	sum += per_cpu(irq_stat, cpu).irq_call_count;
-	sum += per_cpu(irq_stat, cpu).irq_tlb_count;
-#endif
-#ifdef CONFIG_X86_MCE
-	sum += per_cpu(irq_stat, cpu).irq_thermal_count;
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
-	sum += per_cpu(irq_stat, cpu).irq_spurious_count;
-#endif
-	return sum;
-}
-
-u64 arch_irq_stat(void)
-{
-	u64 sum = atomic_read(&irq_err_count);
-
-#ifdef CONFIG_X86_IO_APIC
-	sum += atomic_read(&irq_mis_count);
-#endif
-	return sum;
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 #include <mach_apic.h>
 
@@ -395,20 +237,22 @@ void fixup_irqs(cpumask_t map)
 {
 	unsigned int irq;
 	static int warned;
+	struct irq_desc *desc;
 
-	for (irq = 0; irq < NR_IRQS; irq++) {
+	for_each_irq_desc(irq, desc) {
 		cpumask_t mask;
+
 		if (irq == 2)
 			continue;
 
-		cpus_and(mask, irq_desc[irq].affinity, map);
+		cpus_and(mask, desc->affinity, map);
 		if (any_online_cpu(mask) == NR_CPUS) {
 			printk("Breaking affinity for irq %i\n", irq);
 			mask = map;
 		}
-		if (irq_desc[irq].chip->set_affinity)
-			irq_desc[irq].chip->set_affinity(irq, mask);
-		else if (irq_desc[irq].action && !(warned++))
+		if (desc->chip->set_affinity)
+			desc->chip->set_affinity(irq, mask);
+		else if (desc->action && !(warned++))
 			printk("Cannot set affinity for irq %i\n", irq);
 	}
 
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 1f78b23..60eb84e 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -18,28 +18,6 @@
 #include <asm/idle.h>
 #include <asm/smp.h>
 
-atomic_t irq_err_count;
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
-	/*
-	 * Currently unexpected vectors happen only on SMP and APIC.
-	 * We _must_ ack these because every local APIC has only N
-	 * irq slots per priority level, and a 'hanging, unacked' IRQ
-	 * holds up an irq slot - in excessive cases (when multiple
-	 * unexpected vectors occur) that might lock up the APIC
-	 * completely.
-	 * But don't ack when the APIC is disabled. -AK
-	 */
-	if (!disable_apic)
-		ack_APIC_irq();
-}
-
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 /*
  * Probabilistic stack overflow check:
@@ -65,122 +43,6 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 #endif
 
 /*
- * Generic, controller-independent functions:
- */
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int i = *(loff_t *) v, j;
-	struct irqaction * action;
-	unsigned long flags;
-
-	if (i == 0) {
-		seq_printf(p, "           ");
-		for_each_online_cpu(j)
-			seq_printf(p, "CPU%-8d",j);
-		seq_putc(p, '\n');
-	}
-
-	if (i < NR_IRQS) {
-		unsigned any_count = 0;
-
-		spin_lock_irqsave(&irq_desc[i].lock, flags);
-#ifndef CONFIG_SMP
-		any_count = kstat_irqs(i);
-#else
-		for_each_online_cpu(j)
-			any_count |= kstat_cpu(j).irqs[i];
-#endif
-		action = irq_desc[i].action;
-		if (!action && !any_count)
-			goto skip;
-		seq_printf(p, "%3d: ",i);
-#ifndef CONFIG_SMP
-		seq_printf(p, "%10u ", kstat_irqs(i));
-#else
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
-#endif
-		seq_printf(p, " %8s", irq_desc[i].chip->name);
-		seq_printf(p, "-%-8s", irq_desc[i].name);
-
-		if (action) {
-			seq_printf(p, "  %s", action->name);
-			while ((action = action->next) != NULL)
-				seq_printf(p, ", %s", action->name);
-		}
-		seq_putc(p, '\n');
-skip:
-		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-		seq_printf(p, "NMI: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", cpu_pda(j)->__nmi_count);
-		seq_printf(p, "  Non-maskable interrupts\n");
-		seq_printf(p, "LOC: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", cpu_pda(j)->apic_timer_irqs);
-		seq_printf(p, "  Local timer interrupts\n");
-#ifdef CONFIG_SMP
-		seq_printf(p, "RES: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", cpu_pda(j)->irq_resched_count);
-		seq_printf(p, "  Rescheduling interrupts\n");
-		seq_printf(p, "CAL: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", cpu_pda(j)->irq_call_count);
-		seq_printf(p, "  function call interrupts\n");
-		seq_printf(p, "TLB: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count);
-		seq_printf(p, "  TLB shootdowns\n");
-#endif
-#ifdef CONFIG_X86_MCE
-		seq_printf(p, "TRM: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", cpu_pda(j)->irq_thermal_count);
-		seq_printf(p, "  Thermal event interrupts\n");
-		seq_printf(p, "THR: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", cpu_pda(j)->irq_threshold_count);
-		seq_printf(p, "  Threshold APIC interrupts\n");
-#endif
-		seq_printf(p, "SPU: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", cpu_pda(j)->irq_spurious_count);
-		seq_printf(p, "  Spurious interrupts\n");
-		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-	}
-	return 0;
-}
-
-/*
- * /proc/stat helpers
- */
-u64 arch_irq_stat_cpu(unsigned int cpu)
-{
-	u64 sum = cpu_pda(cpu)->__nmi_count;
-
-	sum += cpu_pda(cpu)->apic_timer_irqs;
-#ifdef CONFIG_SMP
-	sum += cpu_pda(cpu)->irq_resched_count;
-	sum += cpu_pda(cpu)->irq_call_count;
-	sum += cpu_pda(cpu)->irq_tlb_count;
-#endif
-#ifdef CONFIG_X86_MCE
-	sum += cpu_pda(cpu)->irq_thermal_count;
-	sum += cpu_pda(cpu)->irq_threshold_count;
-#endif
-	sum += cpu_pda(cpu)->irq_spurious_count;
-	return sum;
-}
-
-u64 arch_irq_stat(void)
-{
-	return atomic_read(&irq_err_count);
-}
-
-/*
  * do_IRQ handles all normal device IRQ's (the special
  * SMP cross-CPU interrupts have their own specific
  * handlers).
@@ -188,6 +50,7 @@ u64 arch_irq_stat(void)
 asmlinkage unsigned int do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
+	struct irq_desc *desc;
 
 	/* high bit used in ret_from_ code  */
 	unsigned vector = ~regs->orig_ax;
@@ -201,8 +64,9 @@ asmlinkage unsigned int do_IRQ(struct pt_regs *regs)
 	stack_overflow_check(regs);
 #endif
 
-	if (likely(irq < NR_IRQS))
-		generic_handle_irq(irq);
+	desc = irq_to_desc(irq);
+	if (likely(desc))
+		generic_handle_irq_desc(irq, desc);
 	else {
 		if (!disable_apic)
 			ack_APIC_irq();
@@ -223,8 +87,9 @@ void fixup_irqs(cpumask_t map)
 {
 	unsigned int irq;
 	static int warned;
+	struct irq_desc *desc;
 
-	for (irq = 0; irq < NR_IRQS; irq++) {
+	for_each_irq_desc(irq, desc) {
 		cpumask_t mask;
 		int break_affinity = 0;
 		int set_affinity = 1;
@@ -233,32 +98,32 @@ void fixup_irqs(cpumask_t map)
 			continue;
 
 		/* interrupt's are disabled at this point */
-		spin_lock(&irq_desc[irq].lock);
+		spin_lock(&desc->lock);
 
 		if (!irq_has_action(irq) ||
-		    cpus_equal(irq_desc[irq].affinity, map)) {
-			spin_unlock(&irq_desc[irq].lock);
+		    cpus_equal(desc->affinity, map)) {
+			spin_unlock(&desc->lock);
 			continue;
 		}
 
-		cpus_and(mask, irq_desc[irq].affinity, map);
+		cpus_and(mask, desc->affinity, map);
 		if (cpus_empty(mask)) {
 			break_affinity = 1;
 			mask = map;
 		}
 
-		if (irq_desc[irq].chip->mask)
-			irq_desc[irq].chip->mask(irq);
+		if (desc->chip->mask)
+			desc->chip->mask(irq);
 
-		if (irq_desc[irq].chip->set_affinity)
-			irq_desc[irq].chip->set_affinity(irq, mask);
+		if (desc->chip->set_affinity)
+			desc->chip->set_affinity(irq, mask);
 		else if (!(warned++))
 			set_affinity = 0;
 
-		if (irq_desc[irq].chip->unmask)
-			irq_desc[irq].chip->unmask(irq);
+		if (desc->chip->unmask)
+			desc->chip->unmask(irq);
 
-		spin_unlock(&irq_desc[irq].lock);
+		spin_unlock(&desc->lock);
 
 		if (break_affinity && set_affinity)
 			printk("Broke affinity for irq %i\n", irq);
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
index d669142..845aa98 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit_32.c
@@ -69,11 +69,48 @@ void __init init_ISA_irqs (void)
 	 * 16 old-style INTA-cycle interrupts:
 	 */
 	for (i = 0; i < 16; i++) {
+		/* first time call this irq_desc */
+		struct irq_desc *desc = irq_to_desc(i);
+
+		desc->status = IRQ_DISABLED;
+		desc->action = NULL;
+		desc->depth = 1;
+
 		set_irq_chip_and_handler_name(i, &i8259A_chip,
 					      handle_level_irq, "XT");
 	}
 }
 
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+	.handler = no_action,
+	.mask = CPU_MASK_NONE,
+	.name = "cascade",
+};
+
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+	[0 ... IRQ0_VECTOR - 1] = -1,
+	[IRQ0_VECTOR] = 0,
+	[IRQ1_VECTOR] = 1,
+	[IRQ2_VECTOR] = 2,
+	[IRQ3_VECTOR] = 3,
+	[IRQ4_VECTOR] = 4,
+	[IRQ5_VECTOR] = 5,
+	[IRQ6_VECTOR] = 6,
+	[IRQ7_VECTOR] = 7,
+	[IRQ8_VECTOR] = 8,
+	[IRQ9_VECTOR] = 9,
+	[IRQ10_VECTOR] = 10,
+	[IRQ11_VECTOR] = 11,
+	[IRQ12_VECTOR] = 12,
+	[IRQ13_VECTOR] = 13,
+	[IRQ14_VECTOR] = 14,
+	[IRQ15_VECTOR] = 15,
+	[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
+};
+
 /* Overridden in paravirt.c */
 void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
 
@@ -89,15 +126,50 @@ void __init native_init_IRQ(void)
 	 * us. (some of these will be overridden and become
 	 * 'special' SMP interrupts)
 	 */
-	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
-		if (i >= NR_IRQS)
-			break;
+	for (i =  FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
 		/* SYSCALL_VECTOR was reserved in trap_init. */
-		if (!test_bit(vector, used_vectors))
-			set_intr_gate(vector, interrupt[i]);
+		if (i != SYSCALL_VECTOR)
+			set_intr_gate(i, interrupt[i]);
 	}
 
+
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
+	/*
+	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+	 * IPI, driven by wakeup.
+	 */
+	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+	/* IPI for invalidation */
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+
+	/* IPI for generic function call */
+	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+	/* IPI for single call function */
+	set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt);
+
+	/* Low priority IPI to cleanup after moving an irq */
+	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	/* self generated IPI for local APIC timer */
+	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+	/* IPI vectors for APIC spurious and error interrupts */
+	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+#endif
+
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
+	/* thermal monitor LVT interrupt */
+	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+#endif
+
+	if (!acpi_ioapic)
+		setup_irq(2, &irq2);
+
 	/* setup after call gates are initialised (usually add in
 	 * the architecture specific gates)
 	 */
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index 1f26fd9..ff02353 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -135,51 +135,33 @@ DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
 	[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
 };
 
-static void __init init_ISA_irqs (void)
+void __init init_ISA_irqs(void)
 {
 	int i;
 
 	init_bsp_APIC();
 	init_8259A(0);
 
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
+	for (i = 0; i < 16; i++) {
+		/* first time call this irq_desc */
+		struct irq_desc *desc = irq_to_desc(i);
 
-		if (i < 16) {
-			/*
-			 * 16 old-style INTA-cycle interrupts:
-			 */
-			set_irq_chip_and_handler_name(i, &i8259A_chip,
+		desc->status = IRQ_DISABLED;
+		desc->action = NULL;
+		desc->depth = 1;
+
+		/*
+		 * 16 old-style INTA-cycle interrupts:
+		 */
+		set_irq_chip_and_handler_name(i, &i8259A_chip,
 						      handle_level_irq, "XT");
-		} else {
-			/*
-			 * 'high' PCI IRQs filled in on demand
-			 */
-			irq_desc[i].chip = &no_irq_chip;
-		}
 	}
 }
 
 void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
 
-void __init native_init_IRQ(void)
+static void __init smp_intr_init(void)
 {
-	int i;
-
-	init_ISA_irqs();
-	/*
-	 * Cover the whole vector space, no vector can escape
-	 * us. (some of these will be overridden and become
-	 * 'special' SMP interrupts)
-	 */
-	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
-		if (vector != IA32_SYSCALL_VECTOR)
-			set_intr_gate(vector, interrupt[i]);
-	}
-
 #ifdef CONFIG_SMP
 	/*
 	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
@@ -207,6 +189,12 @@ void __init native_init_IRQ(void)
 	/* Low priority IPI to cleanup after moving an irq */
 	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
 #endif
+}
+
+static void __init apic_intr_init(void)
+{
+	smp_intr_init();
+
 	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 
@@ -216,6 +204,25 @@ void __init native_init_IRQ(void)
 	/* IPI vectors for APIC spurious and error interrupts */
 	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
 	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+}
+
+void __init native_init_IRQ(void)
+{
+	int i;
+
+	init_ISA_irqs();
+	/*
+	 * Cover the whole vector space, no vector can escape
+	 * us. (some of these will be overridden and become
+	 * 'special' SMP interrupts)
+	 */
+	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+		int vector = FIRST_EXTERNAL_VECTOR + i;
+		if (vector != IA32_SYSCALL_VECTOR)
+			set_intr_gate(vector, interrupt[i]);
+	}
+
+	apic_intr_init();
 
 	if (!acpi_ioapic)
 		setup_irq(2, &irq2);
diff --git a/arch/x86/kernel/k8.c b/arch/x86/kernel/k8.c
index 7377ccb..304d8bad 100644
--- a/arch/x86/kernel/k8.c
+++ b/arch/x86/kernel/k8.c
@@ -16,8 +16,9 @@ EXPORT_SYMBOL(num_k8_northbridges);
 static u32 *flush_words;
 
 struct pci_device_id k8_nb_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
 	{}
 };
 EXPORT_SYMBOL(k8_nb_ids);
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index f47f0eb..10435a1 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -69,6 +69,9 @@ static int gdb_x86vector = -1;
  */
 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
+#ifndef CONFIG_X86_32
+	u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
 	gdb_regs[GDB_AX]	= regs->ax;
 	gdb_regs[GDB_BX]	= regs->bx;
 	gdb_regs[GDB_CX]	= regs->cx;
@@ -76,9 +79,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[GDB_SI]	= regs->si;
 	gdb_regs[GDB_DI]	= regs->di;
 	gdb_regs[GDB_BP]	= regs->bp;
-	gdb_regs[GDB_PS]	= regs->flags;
 	gdb_regs[GDB_PC]	= regs->ip;
 #ifdef CONFIG_X86_32
+	gdb_regs[GDB_PS]	= regs->flags;
 	gdb_regs[GDB_DS]	= regs->ds;
 	gdb_regs[GDB_ES]	= regs->es;
 	gdb_regs[GDB_CS]	= regs->cs;
@@ -94,6 +97,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[GDB_R13]	= regs->r13;
 	gdb_regs[GDB_R14]	= regs->r14;
 	gdb_regs[GDB_R15]	= regs->r15;
+	gdb_regs32[GDB_PS]	= regs->flags;
+	gdb_regs32[GDB_CS]	= regs->cs;
+	gdb_regs32[GDB_SS]	= regs->ss;
 #endif
 	gdb_regs[GDB_SP]	= regs->sp;
 }
@@ -112,6 +118,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
  */
 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 {
+#ifndef CONFIG_X86_32
+	u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
 	gdb_regs[GDB_AX]	= 0;
 	gdb_regs[GDB_BX]	= 0;
 	gdb_regs[GDB_CX]	= 0;
@@ -129,8 +138,10 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 	gdb_regs[GDB_FS]	= 0xFFFF;
 	gdb_regs[GDB_GS]	= 0xFFFF;
 #else
-	gdb_regs[GDB_PS]	= *(unsigned long *)(p->thread.sp + 8);
-	gdb_regs[GDB_PC]	= 0;
+	gdb_regs32[GDB_PS]	= *(unsigned long *)(p->thread.sp + 8);
+	gdb_regs32[GDB_CS]	= __KERNEL_CS;
+	gdb_regs32[GDB_SS]	= __KERNEL_DS;
+	gdb_regs[GDB_PC]	= p->thread.ip;
 	gdb_regs[GDB_R8]	= 0;
 	gdb_regs[GDB_R9]	= 0;
 	gdb_regs[GDB_R10]	= 0;
@@ -153,6 +164,9 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
  */
 void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
+#ifndef CONFIG_X86_32
+	u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
 	regs->ax		= gdb_regs[GDB_AX];
 	regs->bx		= gdb_regs[GDB_BX];
 	regs->cx		= gdb_regs[GDB_CX];
@@ -160,9 +174,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	regs->si		= gdb_regs[GDB_SI];
 	regs->di		= gdb_regs[GDB_DI];
 	regs->bp		= gdb_regs[GDB_BP];
-	regs->flags		= gdb_regs[GDB_PS];
 	regs->ip		= gdb_regs[GDB_PC];
 #ifdef CONFIG_X86_32
+	regs->flags		= gdb_regs[GDB_PS];
 	regs->ds		= gdb_regs[GDB_DS];
 	regs->es		= gdb_regs[GDB_ES];
 	regs->cs		= gdb_regs[GDB_CS];
@@ -175,6 +189,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	regs->r13		= gdb_regs[GDB_R13];
 	regs->r14		= gdb_regs[GDB_R14];
 	regs->r15		= gdb_regs[GDB_R15];
+	regs->flags		= gdb_regs32[GDB_PS];
+	regs->cs		= gdb_regs32[GDB_CS];
+	regs->ss		= gdb_regs32[GDB_SS];
 #endif
 }
 
@@ -378,10 +395,8 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 		if (remcomInBuffer[0] == 's') {
 			linux_regs->flags |= X86_EFLAGS_TF;
 			kgdb_single_step = 1;
-			if (kgdb_contthread) {
-				atomic_set(&kgdb_cpu_doing_single_step,
-					   raw_smp_processor_id());
-			}
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   raw_smp_processor_id());
 		}
 
 		get_debugreg(dr6, 6);
@@ -440,12 +455,7 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 		return NOTIFY_DONE;
 
 	case DIE_NMI_IPI:
-		if (atomic_read(&kgdb_active) != -1) {
-			/* KGDB CPU roundup */
-			kgdb_nmicallback(raw_smp_processor_id(), regs);
-			was_in_debug_nmi[raw_smp_processor_id()] = 1;
-			touch_nmi_watchdog();
-		}
+		/* Just ignore, we will handle the roundup on DIE_NMI. */
 		return NOTIFY_DONE;
 
 	case DIE_NMIUNKNOWN:
@@ -466,9 +476,15 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 
 	case DIE_DEBUG:
 		if (atomic_read(&kgdb_cpu_doing_single_step) ==
-			raw_smp_processor_id() &&
-			user_mode(regs))
-			return single_step_cont(regs, args);
+		    raw_smp_processor_id()) {
+			if (user_mode(regs))
+				return single_step_cont(regs, args);
+			break;
+		} else if (test_thread_flag(TIF_SINGLESTEP))
+			/* This means a user thread is single stepping
+			 * a system call which should be ignored
+			 */
+			return NOTIFY_DONE;
 		/* fall through */
 	default:
 		if (user_mode(regs))
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 8b7a3cf..478bca9 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -178,7 +178,7 @@ static void kvm_flush_tlb(void)
 	kvm_deferred_mmu_op(&ftlb, sizeof ftlb);
 }
 
-static void kvm_release_pt(u32 pfn)
+static void kvm_release_pt(unsigned long pfn)
 {
 	struct kvm_mmu_op_release_pt rpt = {
 		.header.op = KVM_MMU_OP_RELEASE_PT,
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index d02def0..774ac49 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -78,6 +78,34 @@ static cycle_t kvm_clock_read(void)
 	return ret;
 }
 
+/*
+ * If we don't do that, there is the possibility that the guest
+ * will calibrate under heavy load - thus, getting a lower lpj -
+ * and execute the delays themselves without load. This is wrong,
+ * because no delay loop can finish beforehand.
+ * Any heuristics is subject to fail, because ultimately, a large
+ * poll of guests can be running and trouble each other. So we preset
+ * lpj here
+ */
+static unsigned long kvm_get_tsc_khz(void)
+{
+	return preset_lpj;
+}
+
+static void kvm_get_preset_lpj(void)
+{
+	struct pvclock_vcpu_time_info *src;
+	unsigned long khz;
+	u64 lpj;
+
+	src = &per_cpu(hv_clock, 0);
+	khz = pvclock_tsc_khz(src);
+
+	lpj = ((u64)khz * 1000);
+	do_div(lpj, HZ);
+	preset_lpj = lpj;
+}
+
 static struct clocksource kvm_clock = {
 	.name = "kvm-clock",
 	.read = kvm_clock_read,
@@ -153,6 +181,7 @@ void __init kvmclock_init(void)
 		pv_time_ops.get_wallclock = kvm_get_wallclock;
 		pv_time_ops.set_wallclock = kvm_set_wallclock;
 		pv_time_ops.sched_clock = kvm_clock_read;
+		pv_time_ops.get_tsc_khz = kvm_get_tsc_khz;
 #ifdef CONFIG_X86_LOCAL_APIC
 		pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock;
 #endif
@@ -163,6 +192,7 @@ void __init kvmclock_init(void)
 #ifdef CONFIG_KEXEC
 		machine_ops.crash_shutdown  = kvm_crash_shutdown;
 #endif
+		kvm_get_preset_lpj();
 		clocksource_register(&kvm_clock);
 	}
 }
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index b68e21f..eee32b4 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -18,6 +18,7 @@
 #include <asm/ldt.h>
 #include <asm/desc.h>
 #include <asm/mmu_context.h>
+#include <asm/syscalls.h>
 
 #ifdef CONFIG_SMP
 static void flush_ldt(void *current_mm)
@@ -51,6 +52,8 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 	memset(newldt + oldsize * LDT_ENTRY_SIZE, 0,
 	       (mincount - oldsize) * LDT_ENTRY_SIZE);
 
+	paravirt_alloc_ldt(newldt, mincount);
+
 #ifdef CONFIG_X86_64
 	/* CHECKME: Do we really need this ? */
 	wmb();
@@ -73,6 +76,7 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 #endif
 	}
 	if (oldsize) {
+		paravirt_free_ldt(oldldt, oldsize);
 		if (oldsize * LDT_ENTRY_SIZE > PAGE_SIZE)
 			vfree(oldldt);
 		else
@@ -84,10 +88,13 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 static inline int copy_ldt(mm_context_t *new, mm_context_t *old)
 {
 	int err = alloc_ldt(new, old->size, 0);
+	int i;
 
 	if (err < 0)
 		return err;
-	memcpy(new->ldt, old->ldt, old->size * LDT_ENTRY_SIZE);
+
+	for(i = 0; i < old->size; i++)
+		write_ldt_entry(new->ldt, i, old->ldt + i * LDT_ENTRY_SIZE);
 	return 0;
 }
 
@@ -124,6 +131,7 @@ void destroy_context(struct mm_struct *mm)
 		if (mm == current->active_mm)
 			clear_LDT();
 #endif
+		paravirt_free_ldt(mm->context.ldt, mm->context.size);
 		if (mm->context.size * LDT_ENTRY_SIZE > PAGE_SIZE)
 			vfree(mm->context.ldt);
 		else
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
deleted file mode 100644
index 652fa5c..0000000
--- a/arch/x86/kernel/microcode.c
+++ /dev/null
@@ -1,853 +0,0 @@
-/*
- *	Intel CPU Microcode Update Driver for Linux
- *
- *	Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
- *		      2006	Shaohua Li <shaohua.li@intel.com>
- *
- *	This driver allows to upgrade microcode on Intel processors
- *	belonging to IA-32 family - PentiumPro, Pentium II,
- *	Pentium III, Xeon, Pentium 4, etc.
- *
- *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
- *	Software Developer's Manual
- *	Order Number 253668 or free download from:
- *
- *	http://developer.intel.com/design/pentium4/manuals/253668.htm
- *
- *	For more information, go to http://www.urbanmyth.org/microcode
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- *	1.0	16 Feb 2000, Tigran Aivazian <tigran@sco.com>
- *		Initial release.
- *	1.01	18 Feb 2000, Tigran Aivazian <tigran@sco.com>
- *		Added read() support + cleanups.
- *	1.02	21 Feb 2000, Tigran Aivazian <tigran@sco.com>
- *		Added 'device trimming' support. open(O_WRONLY) zeroes
- *		and frees the saved copy of applied microcode.
- *	1.03	29 Feb 2000, Tigran Aivazian <tigran@sco.com>
- *		Made to use devfs (/dev/cpu/microcode) + cleanups.
- *	1.04	06 Jun 2000, Simon Trimmer <simon@veritas.com>
- *		Added misc device support (now uses both devfs and misc).
- *		Added MICROCODE_IOCFREE ioctl to clear memory.
- *	1.05	09 Jun 2000, Simon Trimmer <simon@veritas.com>
- *		Messages for error cases (non Intel & no suitable microcode).
- *	1.06	03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
- *		Removed ->release(). Removed exclusive open and status bitmap.
- *		Added microcode_rwsem to serialize read()/write()/ioctl().
- *		Removed global kernel lock usage.
- *	1.07	07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
- *		Write 0 to 0x8B msr and then cpuid before reading revision,
- *		so that it works even if there were no update done by the
- *		BIOS. Otherwise, reading from 0x8B gives junk (which happened
- *		to be 0 on my machine which is why it worked even when I
- *		disabled update by the BIOS)
- *		Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
- *	1.08	11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
- *			     Tigran Aivazian <tigran@veritas.com>
- *		Intel Pentium 4 processor support and bugfixes.
- *	1.09	30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
- *		Bugfix for HT (Hyper-Threading) enabled processors
- *		whereby processor resources are shared by all logical processors
- *		in a single CPU package.
- *	1.10	28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
- *		Tigran Aivazian <tigran@veritas.com>,
- *		Serialize updates as required on HT processors due to speculative
- *		nature of implementation.
- *	1.11	22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
- *		Fix the panic when writing zero-length microcode chunk.
- *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
- *		Jun Nakajima <jun.nakajima@intel.com>
- *		Support for the microcode updates in the new format.
- *	1.13	10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
- *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
- *		because we no longer hold a copy of applied microcode
- *		in kernel memory.
- *	1.14	25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
- *		Fix sigmatch() macro to handle old CPUs with pf == 0.
- *		Thanks to Stuart Swales for pointing out this bug.
- */
-
-//#define DEBUG /* pr_debug */
-#include <linux/capability.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/smp_lock.h>
-#include <linux/cpumask.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/miscdevice.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/mutex.h>
-#include <linux/cpu.h>
-#include <linux/firmware.h>
-#include <linux/platform_device.h>
-
-#include <asm/msr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
-
-MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver");
-MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
-MODULE_LICENSE("GPL");
-
-#define MICROCODE_VERSION 	"1.14a"
-
-#define DEFAULT_UCODE_DATASIZE 	(2000) 	  /* 2000 bytes */
-#define MC_HEADER_SIZE		(sizeof (microcode_header_t))  	  /* 48 bytes */
-#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /* 2048 bytes */
-#define EXT_HEADER_SIZE		(sizeof (struct extended_sigtable)) /* 20 bytes */
-#define EXT_SIGNATURE_SIZE	(sizeof (struct extended_signature)) /* 12 bytes */
-#define DWSIZE			(sizeof (u32))
-#define get_totalsize(mc) \
-	(((microcode_t *)mc)->hdr.totalsize ? \
-	 ((microcode_t *)mc)->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE)
-#define get_datasize(mc) \
-	(((microcode_t *)mc)->hdr.datasize ? \
-	 ((microcode_t *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
-
-#define sigmatch(s1, s2, p1, p2) \
-	(((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
-
-#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
-
-/* serialize access to the physical write to MSR 0x79 */
-static DEFINE_SPINLOCK(microcode_update_lock);
-
-/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
-static DEFINE_MUTEX(microcode_mutex);
-
-static struct ucode_cpu_info {
-	int valid;
-	unsigned int sig;
-	unsigned int pf;
-	unsigned int rev;
-	microcode_t *mc;
-} ucode_cpu_info[NR_CPUS];
-
-static void collect_cpu_info(int cpu_num)
-{
-	struct cpuinfo_x86 *c = &cpu_data(cpu_num);
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-	unsigned int val[2];
-
-	/* We should bind the task to the CPU */
-	BUG_ON(raw_smp_processor_id() != cpu_num);
-	uci->pf = uci->rev = 0;
-	uci->mc = NULL;
-	uci->valid = 1;
-
-	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
-	    	cpu_has(c, X86_FEATURE_IA64)) {
-		printk(KERN_ERR "microcode: CPU%d not a capable Intel "
-			"processor\n", cpu_num);
-		uci->valid = 0;
-		return;
-	}
-
-	uci->sig = cpuid_eax(0x00000001);
-
-	if ((c->x86_model >= 5) || (c->x86 > 6)) {
-		/* get processor flags from MSR 0x17 */
-		rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
-		uci->pf = 1 << ((val[1] >> 18) & 7);
-	}
-
-	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
-	/* see notes above for revision 1.07.  Apparent chip bug */
-	sync_core();
-	/* get the current revision from MSR 0x8B */
-	rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev);
-	pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
-			uci->sig, uci->pf, uci->rev);
-}
-
-static inline int microcode_update_match(int cpu_num,
-	microcode_header_t *mc_header, int sig, int pf)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-
-	if (!sigmatch(sig, uci->sig, pf, uci->pf)
-		|| mc_header->rev <= uci->rev)
-		return 0;
-	return 1;
-}
-
-static int microcode_sanity_check(void *mc)
-{
-	microcode_header_t *mc_header = mc;
-	struct extended_sigtable *ext_header = NULL;
-	struct extended_signature *ext_sig;
-	unsigned long total_size, data_size, ext_table_size;
-	int sum, orig_sum, ext_sigcount = 0, i;
-
-	total_size = get_totalsize(mc_header);
-	data_size = get_datasize(mc_header);
-	if (data_size + MC_HEADER_SIZE > total_size) {
-		printk(KERN_ERR "microcode: error! "
-			"Bad data size in microcode data file\n");
-		return -EINVAL;
-	}
-
-	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
-		printk(KERN_ERR "microcode: error! "
-			"Unknown microcode update format\n");
-		return -EINVAL;
-	}
-	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
-	if (ext_table_size) {
-		if ((ext_table_size < EXT_HEADER_SIZE)
-		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
-			printk(KERN_ERR "microcode: error! "
-				"Small exttable size in microcode data file\n");
-			return -EINVAL;
-		}
-		ext_header = mc + MC_HEADER_SIZE + data_size;
-		if (ext_table_size != exttable_size(ext_header)) {
-			printk(KERN_ERR "microcode: error! "
-				"Bad exttable size in microcode data file\n");
-			return -EFAULT;
-		}
-		ext_sigcount = ext_header->count;
-	}
-
-	/* check extended table checksum */
-	if (ext_table_size) {
-		int ext_table_sum = 0;
-		int *ext_tablep = (int *)ext_header;
-
-		i = ext_table_size / DWSIZE;
-		while (i--)
-			ext_table_sum += ext_tablep[i];
-		if (ext_table_sum) {
-			printk(KERN_WARNING "microcode: aborting, "
-				"bad extended signature table checksum\n");
-			return -EINVAL;
-		}
-	}
-
-	/* calculate the checksum */
-	orig_sum = 0;
-	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
-	while (i--)
-		orig_sum += ((int *)mc)[i];
-	if (orig_sum) {
-		printk(KERN_ERR "microcode: aborting, bad checksum\n");
-		return -EINVAL;
-	}
-	if (!ext_table_size)
-		return 0;
-	/* check extended signature checksum */
-	for (i = 0; i < ext_sigcount; i++) {
-		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
-			  EXT_SIGNATURE_SIZE * i;
-		sum = orig_sum
-			- (mc_header->sig + mc_header->pf + mc_header->cksum)
-			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
-		if (sum) {
-			printk(KERN_ERR "microcode: aborting, bad checksum\n");
-			return -EINVAL;
-		}
-	}
-	return 0;
-}
-
-/*
- * return 0 - no update found
- * return 1 - found update
- * return < 0 - error
- */
-static int get_maching_microcode(void *mc, int cpu)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-	microcode_header_t *mc_header = mc;
-	struct extended_sigtable *ext_header;
-	unsigned long total_size = get_totalsize(mc_header);
-	int ext_sigcount, i;
-	struct extended_signature *ext_sig;
-	void *new_mc;
-
-	if (microcode_update_match(cpu, mc_header,
-			mc_header->sig, mc_header->pf))
-		goto find;
-
-	if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
-		return 0;
-
-	ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
-	ext_sigcount = ext_header->count;
-	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
-	for (i = 0; i < ext_sigcount; i++) {
-		if (microcode_update_match(cpu, mc_header,
-				ext_sig->sig, ext_sig->pf))
-			goto find;
-		ext_sig++;
-	}
-	return 0;
-find:
-	pr_debug("microcode: CPU%d found a matching microcode update with"
-		" version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev);
-	new_mc = vmalloc(total_size);
-	if (!new_mc) {
-		printk(KERN_ERR "microcode: error! Can not allocate memory\n");
-		return -ENOMEM;
-	}
-
-	/* free previous update file */
-	vfree(uci->mc);
-
-	memcpy(new_mc, mc, total_size);
-	uci->mc = new_mc;
-	return 1;
-}
-
-static void apply_microcode(int cpu)
-{
-	unsigned long flags;
-	unsigned int val[2];
-	int cpu_num = raw_smp_processor_id();
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-
-	/* We should bind the task to the CPU */
-	BUG_ON(cpu_num != cpu);
-
-	if (uci->mc == NULL)
-		return;
-
-	/* serialize access to the physical write to MSR 0x79 */
-	spin_lock_irqsave(&microcode_update_lock, flags);
-
-	/* write microcode via MSR 0x79 */
-	wrmsr(MSR_IA32_UCODE_WRITE,
-		(unsigned long) uci->mc->bits,
-		(unsigned long) uci->mc->bits >> 16 >> 16);
-	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
-
-	/* see notes above for revision 1.07.  Apparent chip bug */
-	sync_core();
-
-	/* get the current revision from MSR 0x8B */
-	rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
-
-	spin_unlock_irqrestore(&microcode_update_lock, flags);
-	if (val[1] != uci->mc->hdr.rev) {
-		printk(KERN_ERR "microcode: CPU%d update from revision "
-			"0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]);
-		return;
-	}
-	printk(KERN_INFO "microcode: CPU%d updated from revision "
-	       "0x%x to 0x%x, date = %08x \n",
-	       cpu_num, uci->rev, val[1], uci->mc->hdr.date);
-	uci->rev = val[1];
-}
-
-#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-static void __user *user_buffer;	/* user area microcode data buffer */
-static unsigned int user_buffer_size;	/* it's size */
-
-static long get_next_ucode(void **mc, long offset)
-{
-	microcode_header_t mc_header;
-	unsigned long total_size;
-
-	/* No more data */
-	if (offset >= user_buffer_size)
-		return 0;
-	if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) {
-		printk(KERN_ERR "microcode: error! Can not read user data\n");
-		return -EFAULT;
-	}
-	total_size = get_totalsize(&mc_header);
-	if (offset + total_size > user_buffer_size) {
-		printk(KERN_ERR "microcode: error! Bad total size in microcode "
-				"data file\n");
-		return -EINVAL;
-	}
-	*mc = vmalloc(total_size);
-	if (!*mc)
-		return -ENOMEM;
-	if (copy_from_user(*mc, user_buffer + offset, total_size)) {
-		printk(KERN_ERR "microcode: error! Can not read user data\n");
-		vfree(*mc);
-		return -EFAULT;
-	}
-	return offset + total_size;
-}
-
-static int do_microcode_update (void)
-{
-	long cursor = 0;
-	int error = 0;
-	void *new_mc = NULL;
-	int cpu;
-	cpumask_t old;
-
-	old = current->cpus_allowed;
-
-	while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) {
-		error = microcode_sanity_check(new_mc);
-		if (error)
-			goto out;
-		/*
-		 * It's possible the data file has multiple matching ucode,
-		 * lets keep searching till the latest version
-		 */
-		for_each_online_cpu(cpu) {
-			struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
-			if (!uci->valid)
-				continue;
-			set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-			error = get_maching_microcode(new_mc, cpu);
-			if (error < 0)
-				goto out;
-			if (error == 1)
-				apply_microcode(cpu);
-		}
-		vfree(new_mc);
-	}
-out:
-	if (cursor > 0)
-		vfree(new_mc);
-	if (cursor < 0)
-		error = cursor;
-	set_cpus_allowed_ptr(current, &old);
-	return error;
-}
-
-static int microcode_open (struct inode *unused1, struct file *unused2)
-{
-	cycle_kernel_lock();
-	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
-}
-
-static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
-{
-	ssize_t ret;
-
-	if ((len >> PAGE_SHIFT) > num_physpages) {
-		printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages);
-		return -EINVAL;
-	}
-
-	get_online_cpus();
-	mutex_lock(&microcode_mutex);
-
-	user_buffer = (void __user *) buf;
-	user_buffer_size = (int) len;
-
-	ret = do_microcode_update();
-	if (!ret)
-		ret = (ssize_t)len;
-
-	mutex_unlock(&microcode_mutex);
-	put_online_cpus();
-
-	return ret;
-}
-
-static const struct file_operations microcode_fops = {
-	.owner		= THIS_MODULE,
-	.write		= microcode_write,
-	.open		= microcode_open,
-};
-
-static struct miscdevice microcode_dev = {
-	.minor		= MICROCODE_MINOR,
-	.name		= "microcode",
-	.fops		= &microcode_fops,
-};
-
-static int __init microcode_dev_init (void)
-{
-	int error;
-
-	error = misc_register(&microcode_dev);
-	if (error) {
-		printk(KERN_ERR
-			"microcode: can't misc_register on minor=%d\n",
-			MICROCODE_MINOR);
-		return error;
-	}
-
-	return 0;
-}
-
-static void microcode_dev_exit (void)
-{
-	misc_deregister(&microcode_dev);
-}
-
-MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
-#else
-#define microcode_dev_init() 0
-#define microcode_dev_exit() do { } while(0)
-#endif
-
-static long get_next_ucode_from_buffer(void **mc, const u8 *buf,
-	unsigned long size, long offset)
-{
-	microcode_header_t *mc_header;
-	unsigned long total_size;
-
-	/* No more data */
-	if (offset >= size)
-		return 0;
-	mc_header = (microcode_header_t *)(buf + offset);
-	total_size = get_totalsize(mc_header);
-
-	if (offset + total_size > size) {
-		printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
-		return -EINVAL;
-	}
-
-	*mc = vmalloc(total_size);
-	if (!*mc) {
-		printk(KERN_ERR "microcode: error! Can not allocate memory\n");
-		return -ENOMEM;
-	}
-	memcpy(*mc, buf + offset, total_size);
-	return offset + total_size;
-}
-
-/* fake device for request_firmware */
-static struct platform_device *microcode_pdev;
-
-static int cpu_request_microcode(int cpu)
-{
-	char name[30];
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	const struct firmware *firmware;
-	const u8 *buf;
-	unsigned long size;
-	long offset = 0;
-	int error;
-	void *mc;
-
-	/* We should bind the task to the CPU */
-	BUG_ON(cpu != raw_smp_processor_id());
-	sprintf(name,"intel-ucode/%02x-%02x-%02x",
-		c->x86, c->x86_model, c->x86_mask);
-	error = request_firmware(&firmware, name, &microcode_pdev->dev);
-	if (error) {
-		pr_debug("microcode: data file %s load failed\n", name);
-		return error;
-	}
-	buf = firmware->data;
-	size = firmware->size;
-	while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset))
-			> 0) {
-		error = microcode_sanity_check(mc);
-		if (error)
-			break;
-		error = get_maching_microcode(mc, cpu);
-		if (error < 0)
-			break;
-		/*
-		 * It's possible the data file has multiple matching ucode,
-		 * lets keep searching till the latest version
-		 */
-		if (error == 1) {
-			apply_microcode(cpu);
-			error = 0;
-		}
-		vfree(mc);
-	}
-	if (offset > 0)
-		vfree(mc);
-	if (offset < 0)
-		error = offset;
-	release_firmware(firmware);
-
-	return error;
-}
-
-static int apply_microcode_check_cpu(int cpu)
-{
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-	cpumask_t old;
-	unsigned int val[2];
-	int err = 0;
-
-	/* Check if the microcode is available */
-	if (!uci->mc)
-		return 0;
-
-	old = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-
-	/* Check if the microcode we have in memory matches the CPU */
-	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
-	    cpu_has(c, X86_FEATURE_IA64) || uci->sig != cpuid_eax(0x00000001))
-		err = -EINVAL;
-
-	if (!err && ((c->x86_model >= 5) || (c->x86 > 6))) {
-		/* get processor flags from MSR 0x17 */
-		rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
-		if (uci->pf != (1 << ((val[1] >> 18) & 7)))
-			err = -EINVAL;
-	}
-
-	if (!err) {
-		wrmsr(MSR_IA32_UCODE_REV, 0, 0);
-		/* see notes above for revision 1.07.  Apparent chip bug */
-		sync_core();
-		/* get the current revision from MSR 0x8B */
-		rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
-		if (uci->rev != val[1])
-			err = -EINVAL;
-	}
-
-	if (!err)
-		apply_microcode(cpu);
-	else
-		printk(KERN_ERR "microcode: Could not apply microcode to CPU%d:"
-			" sig=0x%x, pf=0x%x, rev=0x%x\n",
-			cpu, uci->sig, uci->pf, uci->rev);
-
-	set_cpus_allowed_ptr(current, &old);
-	return err;
-}
-
-static void microcode_init_cpu(int cpu, int resume)
-{
-	cpumask_t old;
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
-	old = current->cpus_allowed;
-
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-	mutex_lock(&microcode_mutex);
-	collect_cpu_info(cpu);
-	if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
-		cpu_request_microcode(cpu);
-	mutex_unlock(&microcode_mutex);
-	set_cpus_allowed_ptr(current, &old);
-}
-
-static void microcode_fini_cpu(int cpu)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
-	mutex_lock(&microcode_mutex);
-	uci->valid = 0;
-	vfree(uci->mc);
-	uci->mc = NULL;
-	mutex_unlock(&microcode_mutex);
-}
-
-static ssize_t reload_store(struct sys_device *dev,
-			    struct sysdev_attribute *attr,
-			    const char *buf, size_t sz)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
-	char *end;
-	unsigned long val = simple_strtoul(buf, &end, 0);
-	int err = 0;
-	int cpu = dev->id;
-
-	if (end == buf)
-		return -EINVAL;
-	if (val == 1) {
-		cpumask_t old = current->cpus_allowed;
-
-		get_online_cpus();
-		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-
-		mutex_lock(&microcode_mutex);
-		if (uci->valid)
-			err = cpu_request_microcode(cpu);
-		mutex_unlock(&microcode_mutex);
-		put_online_cpus();
-		set_cpus_allowed_ptr(current, &old);
-	}
-	if (err)
-		return err;
-	return sz;
-}
-
-static ssize_t version_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
-
-	return sprintf(buf, "0x%x\n", uci->rev);
-}
-
-static ssize_t pf_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
-
-	return sprintf(buf, "0x%x\n", uci->pf);
-}
-
-static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
-static SYSDEV_ATTR(version, 0400, version_show, NULL);
-static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
-
-static struct attribute *mc_default_attrs[] = {
-	&attr_reload.attr,
-	&attr_version.attr,
-	&attr_processor_flags.attr,
-	NULL
-};
-
-static struct attribute_group mc_attr_group = {
-	.attrs = mc_default_attrs,
-	.name = "microcode",
-};
-
-static int __mc_sysdev_add(struct sys_device *sys_dev, int resume)
-{
-	int err, cpu = sys_dev->id;
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
-	if (!cpu_online(cpu))
-		return 0;
-
-	pr_debug("microcode: CPU%d added\n", cpu);
-	memset(uci, 0, sizeof(*uci));
-
-	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
-	if (err)
-		return err;
-
-	microcode_init_cpu(cpu, resume);
-
-	return 0;
-}
-
-static int mc_sysdev_add(struct sys_device *sys_dev)
-{
-	return __mc_sysdev_add(sys_dev, 0);
-}
-
-static int mc_sysdev_remove(struct sys_device *sys_dev)
-{
-	int cpu = sys_dev->id;
-
-	if (!cpu_online(cpu))
-		return 0;
-
-	pr_debug("microcode: CPU%d removed\n", cpu);
-	microcode_fini_cpu(cpu);
-	sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
-	return 0;
-}
-
-static int mc_sysdev_resume(struct sys_device *dev)
-{
-	int cpu = dev->id;
-
-	if (!cpu_online(cpu))
-		return 0;
-	pr_debug("microcode: CPU%d resumed\n", cpu);
-	/* only CPU 0 will apply ucode here */
-	apply_microcode(0);
-	return 0;
-}
-
-static struct sysdev_driver mc_sysdev_driver = {
-	.add = mc_sysdev_add,
-	.remove = mc_sysdev_remove,
-	.resume = mc_sysdev_resume,
-};
-
-static __cpuinit int
-mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned long)hcpu;
-	struct sys_device *sys_dev;
-
-	sys_dev = get_cpu_sysdev(cpu);
-	switch (action) {
-	case CPU_UP_CANCELED_FROZEN:
-		/* The CPU refused to come up during a system resume */
-		microcode_fini_cpu(cpu);
-		break;
-	case CPU_ONLINE:
-	case CPU_DOWN_FAILED:
-		mc_sysdev_add(sys_dev);
-		break;
-	case CPU_ONLINE_FROZEN:
-		/* System-wide resume is in progress, try to apply microcode */
-		if (apply_microcode_check_cpu(cpu)) {
-			/* The application of microcode failed */
-			microcode_fini_cpu(cpu);
-			__mc_sysdev_add(sys_dev, 1);
-			break;
-		}
-	case CPU_DOWN_FAILED_FROZEN:
-		if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
-			printk(KERN_ERR "microcode: Failed to create the sysfs "
-				"group for CPU%d\n", cpu);
-		break;
-	case CPU_DOWN_PREPARE:
-		mc_sysdev_remove(sys_dev);
-		break;
-	case CPU_DOWN_PREPARE_FROZEN:
-		/* Suspend is in progress, only remove the interface */
-		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block __refdata mc_cpu_notifier = {
-	.notifier_call = mc_cpu_callback,
-};
-
-static int __init microcode_init (void)
-{
-	int error;
-
-	printk(KERN_INFO
-		"IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n");
-
-	error = microcode_dev_init();
-	if (error)
-		return error;
-	microcode_pdev = platform_device_register_simple("microcode", -1,
-							 NULL, 0);
-	if (IS_ERR(microcode_pdev)) {
-		microcode_dev_exit();
-		return PTR_ERR(microcode_pdev);
-	}
-
-	get_online_cpus();
-	error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
-	put_online_cpus();
-	if (error) {
-		microcode_dev_exit();
-		platform_device_unregister(microcode_pdev);
-		return error;
-	}
-
-	register_hotcpu_notifier(&mc_cpu_notifier);
-	return 0;
-}
-
-static void __exit microcode_exit (void)
-{
-	microcode_dev_exit();
-
-	unregister_hotcpu_notifier(&mc_cpu_notifier);
-
-	get_online_cpus();
-	sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
-	put_online_cpus();
-
-	platform_device_unregister(microcode_pdev);
-}
-
-module_init(microcode_init)
-module_exit(microcode_exit)
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
new file mode 100644
index 0000000..7a1f8ee
--- /dev/null
+++ b/arch/x86/kernel/microcode_amd.c
@@ -0,0 +1,435 @@
+/*
+ *  AMD CPU Microcode Update Driver for Linux
+ *  Copyright (C) 2008 Advanced Micro Devices Inc.
+ *
+ *  Author: Peter Oruba <peter.oruba@amd.com>
+ *
+ *  Based on work by:
+ *  Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
+ *
+ *  This driver allows to upgrade microcode on AMD
+ *  family 0x10 and 0x11 processors.
+ *
+ *  Licensed unter the terms of the GNU General Public
+ *  License version 2. See file COPYING for details.
+*/
+
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("AMD Microcode Update Driver");
+MODULE_AUTHOR("Peter Oruba <peter.oruba@amd.com>");
+MODULE_LICENSE("GPL v2");
+
+#define UCODE_MAGIC                0x00414d44
+#define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
+#define UCODE_UCODE_TYPE           0x00000001
+
+struct equiv_cpu_entry {
+	unsigned int installed_cpu;
+	unsigned int fixed_errata_mask;
+	unsigned int fixed_errata_compare;
+	unsigned int equiv_cpu;
+};
+
+struct microcode_header_amd {
+	unsigned int  data_code;
+	unsigned int  patch_id;
+	unsigned char mc_patch_data_id[2];
+	unsigned char mc_patch_data_len;
+	unsigned char init_flag;
+	unsigned int  mc_patch_data_checksum;
+	unsigned int  nb_dev_id;
+	unsigned int  sb_dev_id;
+	unsigned char processor_rev_id[2];
+	unsigned char nb_rev_id;
+	unsigned char sb_rev_id;
+	unsigned char bios_api_rev;
+	unsigned char reserved1[3];
+	unsigned int  match_reg[8];
+};
+
+struct microcode_amd {
+	struct microcode_header_amd hdr;
+	unsigned int mpb[0];
+};
+
+#define UCODE_MAX_SIZE          (2048)
+#define DEFAULT_UCODE_DATASIZE	(896)
+#define MC_HEADER_SIZE		(sizeof(struct microcode_header_amd))
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define DWSIZE			(sizeof(u32))
+/* For now we support a fixed ucode total size only */
+#define get_totalsize(mc) \
+	((((struct microcode_amd *)mc)->hdr.mc_patch_data_len * 28) \
+	 + MC_HEADER_SIZE)
+
+/* serialize access to the physical write */
+static DEFINE_SPINLOCK(microcode_update_lock);
+
+static struct equiv_cpu_entry *equiv_cpu_table;
+
+static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
+{
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	memset(csig, 0, sizeof(*csig));
+
+	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+		printk(KERN_ERR "microcode: CPU%d not a capable AMD processor\n",
+		       cpu);
+		return -1;
+	}
+
+	asm volatile("movl %1, %%ecx; rdmsr"
+		     : "=a" (csig->rev)
+		     : "i" (0x0000008B) : "ecx");
+
+	printk(KERN_INFO "microcode: collect_cpu_info_amd : patch_id=0x%x\n",
+		csig->rev);
+
+	return 0;
+}
+
+static int get_matching_microcode(int cpu, void *mc, int rev)
+{
+	struct microcode_header_amd *mc_header = mc;
+	struct pci_dev *nb_pci_dev, *sb_pci_dev;
+	unsigned int current_cpu_id;
+	unsigned int equiv_cpu_id = 0x00;
+	unsigned int i = 0;
+
+	BUG_ON(equiv_cpu_table == NULL);
+	current_cpu_id = cpuid_eax(0x00000001);
+
+	while (equiv_cpu_table[i].installed_cpu != 0) {
+		if (current_cpu_id == equiv_cpu_table[i].installed_cpu) {
+			equiv_cpu_id = equiv_cpu_table[i].equiv_cpu;
+			break;
+		}
+		i++;
+	}
+
+	if (!equiv_cpu_id) {
+		printk(KERN_ERR "microcode: CPU%d cpu_id "
+		       "not found in equivalent cpu table \n", cpu);
+		return 0;
+	}
+
+	if ((mc_header->processor_rev_id[0]) != (equiv_cpu_id & 0xff)) {
+		printk(KERN_ERR
+			"microcode: CPU%d patch does not match "
+			"(patch is %x, cpu extended is %x) \n",
+			cpu, mc_header->processor_rev_id[0],
+			(equiv_cpu_id & 0xff));
+		return 0;
+	}
+
+	if ((mc_header->processor_rev_id[1]) != ((equiv_cpu_id >> 16) & 0xff)) {
+		printk(KERN_ERR "microcode: CPU%d patch does not match "
+			"(patch is %x, cpu base id is %x) \n",
+			cpu, mc_header->processor_rev_id[1],
+			((equiv_cpu_id >> 16) & 0xff));
+
+		return 0;
+	}
+
+	/* ucode may be northbridge specific */
+	if (mc_header->nb_dev_id) {
+		nb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+					    (mc_header->nb_dev_id & 0xff),
+					    NULL);
+		if ((!nb_pci_dev) ||
+		    (mc_header->nb_rev_id != nb_pci_dev->revision)) {
+			printk(KERN_ERR "microcode: CPU%d NB mismatch \n", cpu);
+			pci_dev_put(nb_pci_dev);
+			return 0;
+		}
+		pci_dev_put(nb_pci_dev);
+	}
+
+	/* ucode may be southbridge specific */
+	if (mc_header->sb_dev_id) {
+		sb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+					    (mc_header->sb_dev_id & 0xff),
+					    NULL);
+		if ((!sb_pci_dev) ||
+		    (mc_header->sb_rev_id != sb_pci_dev->revision)) {
+			printk(KERN_ERR "microcode: CPU%d SB mismatch \n", cpu);
+			pci_dev_put(sb_pci_dev);
+			return 0;
+		}
+		pci_dev_put(sb_pci_dev);
+	}
+
+	if (mc_header->patch_id <= rev)
+		return 0;
+
+	return 1;
+}
+
+static void apply_microcode_amd(int cpu)
+{
+	unsigned long flags;
+	unsigned int eax, edx;
+	unsigned int rev;
+	int cpu_num = raw_smp_processor_id();
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+	struct microcode_amd *mc_amd = uci->mc;
+	unsigned long addr;
+
+	/* We should bind the task to the CPU */
+	BUG_ON(cpu_num != cpu);
+
+	if (mc_amd == NULL)
+		return;
+
+	spin_lock_irqsave(&microcode_update_lock, flags);
+
+	addr = (unsigned long)&mc_amd->hdr.data_code;
+	edx = (unsigned int)(((unsigned long)upper_32_bits(addr)));
+	eax = (unsigned int)(((unsigned long)lower_32_bits(addr)));
+
+	asm volatile("movl %0, %%ecx; wrmsr" :
+		     : "i" (0xc0010020), "a" (eax), "d" (edx) : "ecx");
+
+	/* get patch id after patching */
+	asm volatile("movl %1, %%ecx; rdmsr"
+		     : "=a" (rev)
+		     : "i" (0x0000008B) : "ecx");
+
+	spin_unlock_irqrestore(&microcode_update_lock, flags);
+
+	/* check current patch id and patch's id for match */
+	if (rev != mc_amd->hdr.patch_id) {
+		printk(KERN_ERR "microcode: CPU%d update from revision "
+		       "0x%x to 0x%x failed\n", cpu_num,
+		       mc_amd->hdr.patch_id, rev);
+		return;
+	}
+
+	printk(KERN_INFO "microcode: CPU%d updated from revision "
+	       "0x%x to 0x%x \n",
+	       cpu_num, uci->cpu_sig.rev, mc_amd->hdr.patch_id);
+
+	uci->cpu_sig.rev = rev;
+}
+
+static void * get_next_ucode(u8 *buf, unsigned int size,
+			int (*get_ucode_data)(void *, const void *, size_t),
+			unsigned int *mc_size)
+{
+	unsigned int total_size;
+#define UCODE_CONTAINER_SECTION_HDR	8
+	u8 section_hdr[UCODE_CONTAINER_SECTION_HDR];
+	void *mc;
+
+	if (get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR))
+		return NULL;
+
+	if (section_hdr[0] != UCODE_UCODE_TYPE) {
+		printk(KERN_ERR "microcode: error! "
+		       "Wrong microcode payload type field\n");
+		return NULL;
+	}
+
+	total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8));
+
+	printk(KERN_INFO "microcode: size %u, total_size %u\n",
+		size, total_size);
+
+	if (total_size > size || total_size > UCODE_MAX_SIZE) {
+		printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+		return NULL;
+	}
+
+	mc = vmalloc(UCODE_MAX_SIZE);
+	if (mc) {
+		memset(mc, 0, UCODE_MAX_SIZE);
+		if (get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, total_size)) {
+			vfree(mc);
+			mc = NULL;
+		} else
+			*mc_size = total_size + UCODE_CONTAINER_SECTION_HDR;
+	}
+#undef UCODE_CONTAINER_SECTION_HDR
+	return mc;
+}
+
+
+static int install_equiv_cpu_table(u8 *buf,
+		int (*get_ucode_data)(void *, const void *, size_t))
+{
+#define UCODE_CONTAINER_HEADER_SIZE	12
+	u8 *container_hdr[UCODE_CONTAINER_HEADER_SIZE];
+	unsigned int *buf_pos = (unsigned int *)container_hdr;
+	unsigned long size;
+
+	if (get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE))
+		return 0;
+
+	size = buf_pos[2];
+
+	if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) {
+		printk(KERN_ERR "microcode: error! "
+		       "Wrong microcode equivalnet cpu table\n");
+		return 0;
+	}
+
+	equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
+	if (!equiv_cpu_table) {
+		printk(KERN_ERR "microcode: error, can't allocate memory for equiv CPU table\n");
+		return 0;
+	}
+
+	buf += UCODE_CONTAINER_HEADER_SIZE;
+	if (get_ucode_data(equiv_cpu_table, buf, size)) {
+		vfree(equiv_cpu_table);
+		return 0;
+	}
+
+	return size + UCODE_CONTAINER_HEADER_SIZE; /* add header length */
+#undef UCODE_CONTAINER_HEADER_SIZE
+}
+
+static void free_equiv_cpu_table(void)
+{
+	if (equiv_cpu_table) {
+		vfree(equiv_cpu_table);
+		equiv_cpu_table = NULL;
+	}
+}
+
+static int generic_load_microcode(int cpu, void *data, size_t size,
+		int (*get_ucode_data)(void *, const void *, size_t))
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+	int new_rev = uci->cpu_sig.rev;
+	unsigned int leftover;
+	unsigned long offset;
+
+	offset = install_equiv_cpu_table(ucode_ptr, get_ucode_data);
+	if (!offset) {
+		printk(KERN_ERR "microcode: installing equivalent cpu table failed\n");
+		return -EINVAL;
+	}
+
+	ucode_ptr += offset;
+	leftover = size - offset;
+
+	while (leftover) {
+		unsigned int uninitialized_var(mc_size);
+		struct microcode_header_amd *mc_header;
+
+		mc = get_next_ucode(ucode_ptr, leftover, get_ucode_data, &mc_size);
+		if (!mc)
+			break;
+
+		mc_header = (struct microcode_header_amd *)mc;
+		if (get_matching_microcode(cpu, mc, new_rev)) {
+			if (new_mc)
+				vfree(new_mc);
+			new_rev = mc_header->patch_id;
+			new_mc  = mc;
+		} else 
+			vfree(mc);
+
+		ucode_ptr += mc_size;
+		leftover  -= mc_size;
+	}
+
+	if (new_mc) {
+		if (!leftover) {
+			if (uci->mc)
+				vfree(uci->mc);
+			uci->mc = new_mc;
+			pr_debug("microcode: CPU%d found a matching microcode update with"
+				" version 0x%x (current=0x%x)\n",
+				cpu, new_rev, uci->cpu_sig.rev);
+		} else
+			vfree(new_mc);
+	}
+
+	free_equiv_cpu_table();
+
+	return (int)leftover;
+}
+
+static int get_ucode_fw(void *to, const void *from, size_t n)
+{
+	memcpy(to, from, n);
+	return 0;
+}
+
+static int request_microcode_fw(int cpu, struct device *device)
+{
+	const char *fw_name = "amd-ucode/microcode_amd.bin";
+	const struct firmware *firmware;
+	int ret;
+
+	/* We should bind the task to the CPU */
+	BUG_ON(cpu != raw_smp_processor_id());
+
+	ret = request_firmware(&firmware, fw_name, device);
+	if (ret) {
+		printk(KERN_ERR "microcode: ucode data file %s load failed\n", fw_name);
+		return ret;
+	}
+
+	ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
+			&get_ucode_fw);
+
+	release_firmware(firmware);
+
+	return ret;
+}
+
+static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+	printk(KERN_WARNING "microcode: AMD microcode update via /dev/cpu/microcode"
+			"is not supported\n");
+	return -1;
+}
+
+static void microcode_fini_cpu_amd(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	vfree(uci->mc);
+	uci->mc = NULL;
+}
+
+static struct microcode_ops microcode_amd_ops = {
+	.request_microcode_user           = request_microcode_user,
+	.request_microcode_fw             = request_microcode_fw,
+	.collect_cpu_info                 = collect_cpu_info_amd,
+	.apply_microcode                  = apply_microcode_amd,
+	.microcode_fini_cpu               = microcode_fini_cpu_amd,
+};
+
+struct microcode_ops * __init init_amd_microcode(void)
+{
+	return &microcode_amd_ops;
+}
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
new file mode 100644
index 0000000..936d8d5
--- /dev/null
+++ b/arch/x86/kernel/microcode_core.c
@@ -0,0 +1,508 @@
+/*
+ *	Intel CPU Microcode Update Driver for Linux
+ *
+ *	Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
+ *		      2006	Shaohua Li <shaohua.li@intel.com>
+ *
+ *	This driver allows to upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ *	Software Developer's Manual
+ *	Order Number 253668 or free download from:
+ *
+ *	http://developer.intel.com/design/pentium4/manuals/253668.htm
+ *
+ *	For more information, go to http://www.urbanmyth.org/microcode
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	1.0	16 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Initial release.
+ *	1.01	18 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Added read() support + cleanups.
+ *	1.02	21 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Added 'device trimming' support. open(O_WRONLY) zeroes
+ *		and frees the saved copy of applied microcode.
+ *	1.03	29 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Made to use devfs (/dev/cpu/microcode) + cleanups.
+ *	1.04	06 Jun 2000, Simon Trimmer <simon@veritas.com>
+ *		Added misc device support (now uses both devfs and misc).
+ *		Added MICROCODE_IOCFREE ioctl to clear memory.
+ *	1.05	09 Jun 2000, Simon Trimmer <simon@veritas.com>
+ *		Messages for error cases (non Intel & no suitable microcode).
+ *	1.06	03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
+ *		Removed ->release(). Removed exclusive open and status bitmap.
+ *		Added microcode_rwsem to serialize read()/write()/ioctl().
+ *		Removed global kernel lock usage.
+ *	1.07	07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
+ *		Write 0 to 0x8B msr and then cpuid before reading revision,
+ *		so that it works even if there were no update done by the
+ *		BIOS. Otherwise, reading from 0x8B gives junk (which happened
+ *		to be 0 on my machine which is why it worked even when I
+ *		disabled update by the BIOS)
+ *		Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
+ *	1.08	11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
+ *			     Tigran Aivazian <tigran@veritas.com>
+ *		Intel Pentium 4 processor support and bugfixes.
+ *	1.09	30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
+ *		Bugfix for HT (Hyper-Threading) enabled processors
+ *		whereby processor resources are shared by all logical processors
+ *		in a single CPU package.
+ *	1.10	28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
+ *		Tigran Aivazian <tigran@veritas.com>,
+ *		Serialize updates as required on HT processors due to
+ *		speculative nature of implementation.
+ *	1.11	22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
+ *		Fix the panic when writing zero-length microcode chunk.
+ *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
+ *		Jun Nakajima <jun.nakajima@intel.com>
+ *		Support for the microcode updates in the new format.
+ *	1.13	10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
+ *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
+ *		because we no longer hold a copy of applied microcode
+ *		in kernel memory.
+ *	1.14	25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
+ *		Fix sigmatch() macro to handle old CPUs with pf == 0.
+ *		Thanks to Stuart Swales for pointing out this bug.
+ */
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("Microcode Update Driver");
+MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
+MODULE_LICENSE("GPL");
+
+#define MICROCODE_VERSION 	"2.00"
+
+struct microcode_ops *microcode_ops;
+
+/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
+static DEFINE_MUTEX(microcode_mutex);
+
+struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
+EXPORT_SYMBOL_GPL(ucode_cpu_info);
+
+#ifdef CONFIG_MICROCODE_OLD_INTERFACE
+static int do_microcode_update(const void __user *buf, size_t size)
+{
+	cpumask_t old;
+	int error = 0;
+	int cpu;
+
+	old = current->cpus_allowed;
+
+	for_each_online_cpu(cpu) {
+		struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+		if (!uci->valid)
+			continue;
+
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+		error = microcode_ops->request_microcode_user(cpu, buf, size);
+		if (error < 0)
+			goto out;
+		if (!error)
+			microcode_ops->apply_microcode(cpu);
+	}
+out:
+	set_cpus_allowed_ptr(current, &old);
+	return error;
+}
+
+static int microcode_open(struct inode *unused1, struct file *unused2)
+{
+	cycle_kernel_lock();
+	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
+}
+
+static ssize_t microcode_write(struct file *file, const char __user *buf,
+			       size_t len, loff_t *ppos)
+{
+	ssize_t ret;
+
+	if ((len >> PAGE_SHIFT) > num_physpages) {
+		printk(KERN_ERR "microcode: too much data (max %ld pages)\n",
+		       num_physpages);
+		return -EINVAL;
+	}
+
+	get_online_cpus();
+	mutex_lock(&microcode_mutex);
+
+	ret = do_microcode_update(buf, len);
+	if (!ret)
+		ret = (ssize_t)len;
+
+	mutex_unlock(&microcode_mutex);
+	put_online_cpus();
+
+	return ret;
+}
+
+static const struct file_operations microcode_fops = {
+	.owner		= THIS_MODULE,
+	.write		= microcode_write,
+	.open		= microcode_open,
+};
+
+static struct miscdevice microcode_dev = {
+	.minor		= MICROCODE_MINOR,
+	.name		= "microcode",
+	.fops		= &microcode_fops,
+};
+
+static int __init microcode_dev_init(void)
+{
+	int error;
+
+	error = misc_register(&microcode_dev);
+	if (error) {
+		printk(KERN_ERR
+			"microcode: can't misc_register on minor=%d\n",
+			MICROCODE_MINOR);
+		return error;
+	}
+
+	return 0;
+}
+
+static void microcode_dev_exit(void)
+{
+	misc_deregister(&microcode_dev);
+}
+
+MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
+#else
+#define microcode_dev_init() 0
+#define microcode_dev_exit() do { } while (0)
+#endif
+
+/* fake device for request_firmware */
+struct platform_device *microcode_pdev;
+
+static ssize_t reload_store(struct sys_device *dev,
+			    struct sysdev_attribute *attr,
+			    const char *buf, size_t sz)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+	char *end;
+	unsigned long val = simple_strtoul(buf, &end, 0);
+	int err = 0;
+	int cpu = dev->id;
+
+	if (end == buf)
+		return -EINVAL;
+	if (val == 1) {
+		cpumask_t old = current->cpus_allowed;
+
+		get_online_cpus();
+		if (cpu_online(cpu)) {
+			set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+			mutex_lock(&microcode_mutex);
+			if (uci->valid) {
+				err = microcode_ops->request_microcode_fw(cpu,
+						&microcode_pdev->dev);
+				if (!err)
+					microcode_ops->apply_microcode(cpu);
+			}
+			mutex_unlock(&microcode_mutex);
+			set_cpus_allowed_ptr(current, &old);
+		}
+		put_online_cpus();
+	}
+	if (err)
+		return err;
+	return sz;
+}
+
+static ssize_t version_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+
+	return sprintf(buf, "0x%x\n", uci->cpu_sig.rev);
+}
+
+static ssize_t pf_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+
+	return sprintf(buf, "0x%x\n", uci->cpu_sig.pf);
+}
+
+static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
+static SYSDEV_ATTR(version, 0400, version_show, NULL);
+static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
+
+static struct attribute *mc_default_attrs[] = {
+	&attr_reload.attr,
+	&attr_version.attr,
+	&attr_processor_flags.attr,
+	NULL
+};
+
+static struct attribute_group mc_attr_group = {
+	.attrs = mc_default_attrs,
+	.name = "microcode",
+};
+
+static void microcode_fini_cpu(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	mutex_lock(&microcode_mutex);
+	microcode_ops->microcode_fini_cpu(cpu);
+	uci->valid = 0;
+	mutex_unlock(&microcode_mutex);
+}
+
+static void collect_cpu_info(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	memset(uci, 0, sizeof(*uci));
+	if (!microcode_ops->collect_cpu_info(cpu, &uci->cpu_sig))
+		uci->valid = 1;
+}
+
+static int microcode_resume_cpu(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	struct cpu_signature nsig;
+
+	pr_debug("microcode: CPU%d resumed\n", cpu);
+
+	if (!uci->mc)
+		return 1;
+
+	/*
+	 * Let's verify that the 'cached' ucode does belong
+	 * to this cpu (a bit of paranoia):
+	 */
+	if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
+		microcode_fini_cpu(cpu);
+		return -1;
+	}
+
+	if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
+		microcode_fini_cpu(cpu);
+		/* Should we look for a new ucode here? */
+		return 1;
+	}
+
+	return 0;
+}
+
+void microcode_update_cpu(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	int err = 0;
+
+	/*
+	 * Check if the system resume is in progress (uci->valid != NULL),
+	 * otherwise just request a firmware:
+	 */
+	if (uci->valid) {
+		err = microcode_resume_cpu(cpu);
+	} else {	
+		collect_cpu_info(cpu);
+		if (uci->valid && system_state == SYSTEM_RUNNING)
+			err = microcode_ops->request_microcode_fw(cpu,
+					&microcode_pdev->dev);
+	}
+	if (!err)
+		microcode_ops->apply_microcode(cpu);
+}
+
+static void microcode_init_cpu(int cpu)
+{
+	cpumask_t old = current->cpus_allowed;
+
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	/* We should bind the task to the CPU */
+	BUG_ON(raw_smp_processor_id() != cpu);
+
+	mutex_lock(&microcode_mutex);
+	microcode_update_cpu(cpu);
+	mutex_unlock(&microcode_mutex);
+
+	set_cpus_allowed_ptr(current, &old);
+}
+
+static int mc_sysdev_add(struct sys_device *sys_dev)
+{
+	int err, cpu = sys_dev->id;
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	pr_debug("microcode: CPU%d added\n", cpu);
+	memset(uci, 0, sizeof(*uci));
+
+	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
+	if (err)
+		return err;
+
+	microcode_init_cpu(cpu);
+	return 0;
+}
+
+static int mc_sysdev_remove(struct sys_device *sys_dev)
+{
+	int cpu = sys_dev->id;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	pr_debug("microcode: CPU%d removed\n", cpu);
+	microcode_fini_cpu(cpu);
+	sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+	return 0;
+}
+
+static int mc_sysdev_resume(struct sys_device *dev)
+{
+	int cpu = dev->id;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	/* only CPU 0 will apply ucode here */
+	microcode_update_cpu(0);
+	return 0;
+}
+
+static struct sysdev_driver mc_sysdev_driver = {
+	.add = mc_sysdev_add,
+	.remove = mc_sysdev_remove,
+	.resume = mc_sysdev_resume,
+};
+
+static __cpuinit int
+mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct sys_device *sys_dev;
+
+	sys_dev = get_cpu_sysdev(cpu);
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		microcode_init_cpu(cpu);
+	case CPU_DOWN_FAILED:
+	case CPU_DOWN_FAILED_FROZEN:
+		pr_debug("microcode: CPU%d added\n", cpu);
+		if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
+			printk(KERN_ERR "microcode: Failed to create the sysfs "
+				"group for CPU%d\n", cpu);
+		break;
+	case CPU_DOWN_PREPARE:
+	case CPU_DOWN_PREPARE_FROZEN:
+		/* Suspend is in progress, only remove the interface */
+		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+		pr_debug("microcode: CPU%d removed\n", cpu);
+		break;
+	case CPU_DEAD:
+	case CPU_UP_CANCELED_FROZEN:
+		/* The CPU refused to come up during a system resume */
+		microcode_fini_cpu(cpu);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __refdata mc_cpu_notifier = {
+	.notifier_call = mc_cpu_callback,
+};
+
+static int __init microcode_init(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	int error;
+
+	if (c->x86_vendor == X86_VENDOR_INTEL)
+		microcode_ops = init_intel_microcode();
+	else if (c->x86_vendor == X86_VENDOR_AMD)
+		microcode_ops = init_amd_microcode();
+
+	if (!microcode_ops) {
+		printk(KERN_ERR "microcode: no support for this CPU vendor\n");
+		return -ENODEV;
+	}
+
+	error = microcode_dev_init();
+	if (error)
+		return error;
+	microcode_pdev = platform_device_register_simple("microcode", -1,
+							 NULL, 0);
+	if (IS_ERR(microcode_pdev)) {
+		microcode_dev_exit();
+		return PTR_ERR(microcode_pdev);
+	}
+
+	get_online_cpus();
+	error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
+	put_online_cpus();
+	if (error) {
+		microcode_dev_exit();
+		platform_device_unregister(microcode_pdev);
+		return error;
+	}
+
+	register_hotcpu_notifier(&mc_cpu_notifier);
+
+	printk(KERN_INFO
+	       "Microcode Update Driver: v" MICROCODE_VERSION
+	       " <tigran@aivazian.fsnet.co.uk>"
+	       " <peter.oruba@amd.com>\n");
+
+	return 0;
+}
+
+static void __exit microcode_exit(void)
+{
+	microcode_dev_exit();
+
+	unregister_hotcpu_notifier(&mc_cpu_notifier);
+
+	get_online_cpus();
+	sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
+	put_online_cpus();
+
+	platform_device_unregister(microcode_pdev);
+
+	microcode_ops = NULL;
+
+	printk(KERN_INFO
+	       "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
+}
+
+module_init(microcode_init);
+module_exit(microcode_exit);
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
new file mode 100644
index 0000000..622dc4a
--- /dev/null
+++ b/arch/x86/kernel/microcode_intel.c
@@ -0,0 +1,480 @@
+/*
+ *	Intel CPU Microcode Update Driver for Linux
+ *
+ *	Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
+ *		      2006	Shaohua Li <shaohua.li@intel.com>
+ *
+ *	This driver allows to upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ *	Software Developer's Manual
+ *	Order Number 253668 or free download from:
+ *
+ *	http://developer.intel.com/design/pentium4/manuals/253668.htm
+ *
+ *	For more information, go to http://www.urbanmyth.org/microcode
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	1.0	16 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Initial release.
+ *	1.01	18 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Added read() support + cleanups.
+ *	1.02	21 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Added 'device trimming' support. open(O_WRONLY) zeroes
+ *		and frees the saved copy of applied microcode.
+ *	1.03	29 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Made to use devfs (/dev/cpu/microcode) + cleanups.
+ *	1.04	06 Jun 2000, Simon Trimmer <simon@veritas.com>
+ *		Added misc device support (now uses both devfs and misc).
+ *		Added MICROCODE_IOCFREE ioctl to clear memory.
+ *	1.05	09 Jun 2000, Simon Trimmer <simon@veritas.com>
+ *		Messages for error cases (non Intel & no suitable microcode).
+ *	1.06	03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
+ *		Removed ->release(). Removed exclusive open and status bitmap.
+ *		Added microcode_rwsem to serialize read()/write()/ioctl().
+ *		Removed global kernel lock usage.
+ *	1.07	07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
+ *		Write 0 to 0x8B msr and then cpuid before reading revision,
+ *		so that it works even if there were no update done by the
+ *		BIOS. Otherwise, reading from 0x8B gives junk (which happened
+ *		to be 0 on my machine which is why it worked even when I
+ *		disabled update by the BIOS)
+ *		Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
+ *	1.08	11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
+ *			     Tigran Aivazian <tigran@veritas.com>
+ *		Intel Pentium 4 processor support and bugfixes.
+ *	1.09	30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
+ *		Bugfix for HT (Hyper-Threading) enabled processors
+ *		whereby processor resources are shared by all logical processors
+ *		in a single CPU package.
+ *	1.10	28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
+ *		Tigran Aivazian <tigran@veritas.com>,
+ *		Serialize updates as required on HT processors due to
+ *		speculative nature of implementation.
+ *	1.11	22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
+ *		Fix the panic when writing zero-length microcode chunk.
+ *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
+ *		Jun Nakajima <jun.nakajima@intel.com>
+ *		Support for the microcode updates in the new format.
+ *	1.13	10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
+ *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
+ *		because we no longer hold a copy of applied microcode
+ *		in kernel memory.
+ *	1.14	25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
+ *		Fix sigmatch() macro to handle old CPUs with pf == 0.
+ *		Thanks to Stuart Swales for pointing out this bug.
+ */
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("Microcode Update Driver");
+MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
+MODULE_LICENSE("GPL");
+
+struct microcode_header_intel {
+	unsigned int            hdrver;
+	unsigned int            rev;
+	unsigned int            date;
+	unsigned int            sig;
+	unsigned int            cksum;
+	unsigned int            ldrver;
+	unsigned int            pf;
+	unsigned int            datasize;
+	unsigned int            totalsize;
+	unsigned int            reserved[3];
+};
+
+struct microcode_intel {
+	struct microcode_header_intel hdr;
+	unsigned int            bits[0];
+};
+
+/* microcode format is extended from prescott processors */
+struct extended_signature {
+	unsigned int            sig;
+	unsigned int            pf;
+	unsigned int            cksum;
+};
+
+struct extended_sigtable {
+	unsigned int            count;
+	unsigned int            cksum;
+	unsigned int            reserved[3];
+	struct extended_signature sigs[0];
+};
+
+#define DEFAULT_UCODE_DATASIZE 	(2000)
+#define MC_HEADER_SIZE		(sizeof(struct microcode_header_intel))
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define EXT_HEADER_SIZE		(sizeof(struct extended_sigtable))
+#define EXT_SIGNATURE_SIZE	(sizeof(struct extended_signature))
+#define DWSIZE			(sizeof(u32))
+#define get_totalsize(mc) \
+	(((struct microcode_intel *)mc)->hdr.totalsize ? \
+	 ((struct microcode_intel *)mc)->hdr.totalsize : \
+	 DEFAULT_UCODE_TOTALSIZE)
+
+#define get_datasize(mc) \
+	(((struct microcode_intel *)mc)->hdr.datasize ? \
+	 ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
+
+#define sigmatch(s1, s2, p1, p2) \
+	(((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
+
+#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
+
+/* serialize access to the physical write to MSR 0x79 */
+static DEFINE_SPINLOCK(microcode_update_lock);
+
+static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
+{
+	struct cpuinfo_x86 *c = &cpu_data(cpu_num);
+	unsigned int val[2];
+
+	memset(csig, 0, sizeof(*csig));
+
+	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
+	    cpu_has(c, X86_FEATURE_IA64)) {
+		printk(KERN_ERR "microcode: CPU%d not a capable Intel "
+			"processor\n", cpu_num);
+		return -1;
+	}
+
+	csig->sig = cpuid_eax(0x00000001);
+
+	if ((c->x86_model >= 5) || (c->x86 > 6)) {
+		/* get processor flags from MSR 0x17 */
+		rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+		csig->pf = 1 << ((val[1] >> 18) & 7);
+	}
+
+	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+	/* see notes above for revision 1.07.  Apparent chip bug */
+	sync_core();
+	/* get the current revision from MSR 0x8B */
+	rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
+	pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
+			csig->sig, csig->pf, csig->rev);
+
+	return 0;
+}
+
+static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf)
+{
+	return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1;
+}
+
+static inline int 
+update_match_revision(struct microcode_header_intel *mc_header,	int rev)
+{
+	return (mc_header->rev <= rev) ? 0 : 1;
+}
+
+static int microcode_sanity_check(void *mc)
+{
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header = NULL;
+	struct extended_signature *ext_sig;
+	unsigned long total_size, data_size, ext_table_size;
+	int sum, orig_sum, ext_sigcount = 0, i;
+
+	total_size = get_totalsize(mc_header);
+	data_size = get_datasize(mc_header);
+	if (data_size + MC_HEADER_SIZE > total_size) {
+		printk(KERN_ERR "microcode: error! "
+			"Bad data size in microcode data file\n");
+		return -EINVAL;
+	}
+
+	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
+		printk(KERN_ERR "microcode: error! "
+			"Unknown microcode update format\n");
+		return -EINVAL;
+	}
+	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+	if (ext_table_size) {
+		if ((ext_table_size < EXT_HEADER_SIZE)
+		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+			printk(KERN_ERR "microcode: error! "
+				"Small exttable size in microcode data file\n");
+			return -EINVAL;
+		}
+		ext_header = mc + MC_HEADER_SIZE + data_size;
+		if (ext_table_size != exttable_size(ext_header)) {
+			printk(KERN_ERR "microcode: error! "
+				"Bad exttable size in microcode data file\n");
+			return -EFAULT;
+		}
+		ext_sigcount = ext_header->count;
+	}
+
+	/* check extended table checksum */
+	if (ext_table_size) {
+		int ext_table_sum = 0;
+		int *ext_tablep = (int *)ext_header;
+
+		i = ext_table_size / DWSIZE;
+		while (i--)
+			ext_table_sum += ext_tablep[i];
+		if (ext_table_sum) {
+			printk(KERN_WARNING "microcode: aborting, "
+				"bad extended signature table checksum\n");
+			return -EINVAL;
+		}
+	}
+
+	/* calculate the checksum */
+	orig_sum = 0;
+	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+	while (i--)
+		orig_sum += ((int *)mc)[i];
+	if (orig_sum) {
+		printk(KERN_ERR "microcode: aborting, bad checksum\n");
+		return -EINVAL;
+	}
+	if (!ext_table_size)
+		return 0;
+	/* check extended signature checksum */
+	for (i = 0; i < ext_sigcount; i++) {
+		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
+			  EXT_SIGNATURE_SIZE * i;
+		sum = orig_sum
+			- (mc_header->sig + mc_header->pf + mc_header->cksum)
+			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
+		if (sum) {
+			printk(KERN_ERR "microcode: aborting, bad checksum\n");
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+static int
+get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev)
+{
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header;
+	unsigned long total_size = get_totalsize(mc_header);
+	int ext_sigcount, i;
+	struct extended_signature *ext_sig;
+
+	if (!update_match_revision(mc_header, rev))
+		return 0;
+
+	if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf))
+		return 1;
+
+	/* Look for ext. headers: */
+	if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
+		return 0;
+
+	ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
+	ext_sigcount = ext_header->count;
+	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+	for (i = 0; i < ext_sigcount; i++) {
+		if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf))
+			return 1;
+		ext_sig++;
+	}
+	return 0;
+}
+
+static void apply_microcode(int cpu)
+{
+	unsigned long flags;
+	unsigned int val[2];
+	int cpu_num = raw_smp_processor_id();
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	struct microcode_intel *mc_intel = uci->mc;
+
+	/* We should bind the task to the CPU */
+	BUG_ON(cpu_num != cpu);
+
+	if (mc_intel == NULL)
+		return;
+
+	/* serialize access to the physical write to MSR 0x79 */
+	spin_lock_irqsave(&microcode_update_lock, flags);
+
+	/* write microcode via MSR 0x79 */
+	wrmsr(MSR_IA32_UCODE_WRITE,
+	      (unsigned long) mc_intel->bits,
+	      (unsigned long) mc_intel->bits >> 16 >> 16);
+	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+
+	/* see notes above for revision 1.07.  Apparent chip bug */
+	sync_core();
+
+	/* get the current revision from MSR 0x8B */
+	rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+
+	spin_unlock_irqrestore(&microcode_update_lock, flags);
+	if (val[1] != mc_intel->hdr.rev) {
+		printk(KERN_ERR "microcode: CPU%d update from revision "
+			"0x%x to 0x%x failed\n", cpu_num, uci->cpu_sig.rev, val[1]);
+		return;
+	}
+	printk(KERN_INFO "microcode: CPU%d updated from revision "
+	       "0x%x to 0x%x, date = %04x-%02x-%02x \n",
+		cpu_num, uci->cpu_sig.rev, val[1],
+		mc_intel->hdr.date & 0xffff,
+		mc_intel->hdr.date >> 24,
+		(mc_intel->hdr.date >> 16) & 0xff);
+	uci->cpu_sig.rev = val[1];
+}
+
+static int generic_load_microcode(int cpu, void *data, size_t size,
+		int (*get_ucode_data)(void *, const void *, size_t))
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+	int new_rev = uci->cpu_sig.rev;
+	unsigned int leftover = size;
+
+	while (leftover) {
+		struct microcode_header_intel mc_header;
+		unsigned int mc_size;
+
+		if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header)))
+			break;
+
+		mc_size = get_totalsize(&mc_header);
+		if (!mc_size || mc_size > leftover) {
+			printk(KERN_ERR "microcode: error!"
+					"Bad data in microcode data file\n");
+			break;
+		}
+
+		mc = vmalloc(mc_size);
+		if (!mc)
+			break;
+
+		if (get_ucode_data(mc, ucode_ptr, mc_size) ||
+		    microcode_sanity_check(mc) < 0) {
+			vfree(mc);
+			break;
+		}
+
+		if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
+			if (new_mc)
+				vfree(new_mc);
+			new_rev = mc_header.rev;
+			new_mc  = mc;
+		} else
+			vfree(mc);
+
+		ucode_ptr += mc_size;
+		leftover  -= mc_size;
+	}
+
+	if (new_mc) {
+		if (!leftover) {
+			if (uci->mc)
+				vfree(uci->mc);
+			uci->mc = (struct microcode_intel *)new_mc;
+			pr_debug("microcode: CPU%d found a matching microcode update with"
+				 " version 0x%x (current=0x%x)\n",
+				cpu, new_rev, uci->cpu_sig.rev);
+		} else
+			vfree(new_mc);
+	}
+
+	return (int)leftover;
+}
+
+static int get_ucode_fw(void *to, const void *from, size_t n)
+{
+	memcpy(to, from, n);
+	return 0;
+}
+
+static int request_microcode_fw(int cpu, struct device *device)
+{
+	char name[30];
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	const struct firmware *firmware;
+	int ret;
+
+	/* We should bind the task to the CPU */
+	BUG_ON(cpu != raw_smp_processor_id());
+	sprintf(name, "intel-ucode/%02x-%02x-%02x",
+		c->x86, c->x86_model, c->x86_mask);
+	ret = request_firmware(&firmware, name, device);
+	if (ret) {
+		pr_debug("microcode: data file %s load failed\n", name);
+		return ret;
+	}
+
+	ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
+			&get_ucode_fw);
+
+	release_firmware(firmware);
+
+	return ret;
+}
+
+static int get_ucode_user(void *to, const void *from, size_t n)
+{
+	return copy_from_user(to, from, n);
+}
+
+static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+	/* We should bind the task to the CPU */
+	BUG_ON(cpu != raw_smp_processor_id());
+
+	return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user);
+}
+
+static void microcode_fini_cpu(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	vfree(uci->mc);
+	uci->mc = NULL;
+}
+
+struct microcode_ops microcode_intel_ops = {
+	.request_microcode_user		  = request_microcode_user,
+	.request_microcode_fw             = request_microcode_fw,
+	.collect_cpu_info                 = collect_cpu_info,
+	.apply_microcode                  = apply_microcode,
+	.microcode_fini_cpu               = microcode_fini_cpu,
+};
+
+struct microcode_ops * __init init_intel_microcode(void)
+{
+	return &microcode_intel_ops;
+}
+
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index b3fb430..f98f4e1 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -397,7 +397,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
        generic_bigsmp_probe();
 #endif
 
+#ifdef CONFIG_X86_32
 	setup_apic_routing();
+#endif
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
 	return num_processors;
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 2e2af5d..82a7c7e 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -163,8 +163,8 @@ static int __cpuinit msr_device_create(int cpu)
 {
 	struct device *dev;
 
-	dev = device_create_drvdata(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
-				    NULL, "msr%d", cpu);
+	dev = device_create(msr_class, NULL, MKDEV(MSR_MAJOR, cpu), NULL,
+			    "msr%d", cpu);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index abb78a2..2c97f07 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -299,6 +299,15 @@ void acpi_nmi_disable(void)
 		on_each_cpu(__acpi_nmi_disable, NULL, 1);
 }
 
+/*
+ * This function is called as soon the LAPIC NMI watchdog driver has everything
+ * in place and it's ready to check if the NMIs belong to the NMI watchdog
+ */
+void cpu_nmi_set_wd_enabled(void)
+{
+	__get_cpu_var(wd_enabled) = 1;
+}
+
 void setup_apic_nmi_watchdog(void *unused)
 {
 	if (__get_cpu_var(wd_enabled))
@@ -311,8 +320,6 @@ void setup_apic_nmi_watchdog(void *unused)
 
 	switch (nmi_watchdog) {
 	case NMI_LOCAL_APIC:
-		 /* enable it before to avoid race with handler */
-		__get_cpu_var(wd_enabled) = 1;
 		if (lapic_watchdog_init(nmi_hz) < 0) {
 			__get_cpu_var(wd_enabled) = 0;
 			return;
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index eecc8c1..4caff39 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -229,6 +229,12 @@ static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
 	}
 }
 
+static int __init numaq_setup_ioapic_ids(void)
+{
+	/* so can skip it */
+	return 1;
+}
+
 static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_pre_time_init	= numaq_pre_time_init,
 	.arch_time_init		= NULL,
@@ -243,6 +249,7 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.mpc_oem_bus_info	= mpc_oem_bus_info,
 	.mpc_oem_pci_bus	= mpc_oem_pci_bus,
 	.smp_read_mpc_oem	= smp_read_mpc_oem,
+	.setup_ioapic_ids	= numaq_setup_ioapic_ids,
 };
 
 void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c
index 3e66722..7a13fac 100644
--- a/arch/x86/kernel/olpc.c
+++ b/arch/x86/kernel/olpc.c
@@ -190,12 +190,12 @@ EXPORT_SYMBOL_GPL(olpc_ec_cmd);
 static void __init platform_detect(void)
 {
 	size_t propsize;
-	u32 rev;
+	__be32 rev;
 
 	if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4,
 			&propsize) || propsize != 4) {
 		printk(KERN_ERR "ofw: getprop call failed!\n");
-		rev = 0;
+		rev = cpu_to_be32(0);
 	}
 	olpc_platform_info.boardrev = be32_to_cpu(rev);
 }
@@ -203,7 +203,7 @@ static void __init platform_detect(void)
 static void __init platform_detect(void)
 {
 	/* stopgap until OFW support is added to the kernel */
-	olpc_platform_info.boardrev = be32_to_cpu(0xc2);
+	olpc_platform_info.boardrev = 0xc2;
 }
 #endif
 
diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c
new file mode 100644
index 0000000..0e9f198
--- /dev/null
+++ b/arch/x86/kernel/paravirt-spinlocks.c
@@ -0,0 +1,37 @@
+/*
+ * Split spinlock implementation out into its own file, so it can be
+ * compiled in a FTRACE-compatible way.
+ */
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <asm/paravirt.h>
+
+static void default_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags)
+{
+	__raw_spin_lock(lock);
+}
+
+struct pv_lock_ops pv_lock_ops = {
+#ifdef CONFIG_SMP
+	.spin_is_locked = __ticket_spin_is_locked,
+	.spin_is_contended = __ticket_spin_is_contended,
+
+	.spin_lock = __ticket_spin_lock,
+	.spin_lock_flags = default_spin_lock_flags,
+	.spin_trylock = __ticket_spin_trylock,
+	.spin_unlock = __ticket_spin_unlock,
+#endif
+};
+EXPORT_SYMBOL(pv_lock_ops);
+
+void __init paravirt_use_bytelocks(void)
+{
+#ifdef CONFIG_SMP
+	pv_lock_ops.spin_is_locked = __byte_spin_is_locked;
+	pv_lock_ops.spin_is_contended = __byte_spin_is_contended;
+	pv_lock_ops.spin_lock = __byte_spin_lock;
+	pv_lock_ops.spin_trylock = __byte_spin_trylock;
+	pv_lock_ops.spin_unlock = __byte_spin_unlock;
+#endif
+}
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 300da17..e4c8fb6 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -268,17 +268,6 @@ enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
 	return __get_cpu_var(paravirt_lazy_mode);
 }
 
-void __init paravirt_use_bytelocks(void)
-{
-#ifdef CONFIG_SMP
-	pv_lock_ops.spin_is_locked = __byte_spin_is_locked;
-	pv_lock_ops.spin_is_contended = __byte_spin_is_contended;
-	pv_lock_ops.spin_lock = __byte_spin_lock;
-	pv_lock_ops.spin_trylock = __byte_spin_trylock;
-	pv_lock_ops.spin_unlock = __byte_spin_unlock;
-#endif
-}
-
 struct pv_info pv_info = {
 	.name = "bare hardware",
 	.paravirt_enabled = 0,
@@ -330,6 +319,7 @@ struct pv_cpu_ops pv_cpu_ops = {
 #endif
 	.wbinvd = native_wbinvd,
 	.read_msr = native_read_msr_safe,
+	.read_msr_amd = native_read_msr_amd_safe,
 	.write_msr = native_write_msr_safe,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
@@ -348,6 +338,10 @@ struct pv_cpu_ops pv_cpu_ops = {
 	.write_ldt_entry = native_write_ldt_entry,
 	.write_gdt_entry = native_write_gdt_entry,
 	.write_idt_entry = native_write_idt_entry,
+
+	.alloc_ldt = paravirt_nop,
+	.free_ldt = paravirt_nop,
+
 	.load_sp0 = native_load_sp0,
 
 #if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
@@ -373,8 +367,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 
 struct pv_apic_ops pv_apic_ops = {
 #ifdef CONFIG_X86_LOCAL_APIC
-	.apic_write = native_apic_write,
-	.apic_read = native_apic_read,
 	.setup_boot_clock = setup_boot_APIC_clock,
 	.setup_secondary_clock = setup_secondary_APIC_clock,
 	.startup_ipi_hook = paravirt_nop,
@@ -461,18 +453,6 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.set_fixmap = native_set_fixmap,
 };
 
-struct pv_lock_ops pv_lock_ops = {
-#ifdef CONFIG_SMP
-	.spin_is_locked = __ticket_spin_is_locked,
-	.spin_is_contended = __ticket_spin_is_contended,
-
-	.spin_lock = __ticket_spin_lock,
-	.spin_trylock = __ticket_spin_trylock,
-	.spin_unlock = __ticket_spin_unlock,
-#endif
-};
-EXPORT_SYMBOL(pv_lock_ops);
-
 EXPORT_SYMBOL_GPL(pv_time_ops);
 EXPORT_SYMBOL    (pv_cpu_ops);
 EXPORT_SYMBOL    (pv_mmu_ops);
diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c
index 5826221..9fe644f 100644
--- a/arch/x86/kernel/paravirt_patch_32.c
+++ b/arch/x86/kernel/paravirt_patch_32.c
@@ -23,7 +23,7 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 			start = start_##ops##_##x;		\
 			end = end_##ops##_##x;			\
 			goto patch_site
-	switch(type) {
+	switch (type) {
 		PATCH_SITE(pv_irq_ops, irq_disable);
 		PATCH_SITE(pv_irq_ops, irq_enable);
 		PATCH_SITE(pv_irq_ops, restore_fl);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index dcdac6c..e1e731d 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -217,16 +217,6 @@ static inline unsigned long verify_bit_range(unsigned long* bitmap,
 
 #endif /* CONFIG_IOMMU_DEBUG */
 
-static inline unsigned int num_dma_pages(unsigned long dma, unsigned int dmalen)
-{
-	unsigned int npages;
-
-	npages = PAGE_ALIGN(dma + dmalen) - (dma & PAGE_MASK);
-	npages >>= PAGE_SHIFT;
-
-	return npages;
-}
-
 static inline int translation_enabled(struct iommu_table *tbl)
 {
 	/* only PHBs with translation enabled have an IOMMU table */
@@ -261,7 +251,7 @@ static void iommu_range_reserve(struct iommu_table *tbl,
 			       badbit, tbl, start_addr, npages);
 	}
 
-	set_bit_string(tbl->it_map, index, npages);
+	iommu_area_reserve(tbl->it_map, index, npages);
 
 	spin_unlock_irqrestore(&tbl->it_lock, flags);
 }
@@ -408,7 +398,7 @@ static void calgary_unmap_sg(struct device *dev,
 		if (dmalen == 0)
 			break;
 
-		npages = num_dma_pages(dma, dmalen);
+		npages = iommu_num_pages(dma, dmalen, PAGE_SIZE);
 		iommu_free(tbl, dma, npages);
 	}
 }
@@ -427,7 +417,7 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 		BUG_ON(!sg_page(s));
 
 		vaddr = (unsigned long) sg_virt(s);
-		npages = num_dma_pages(vaddr, s->length);
+		npages = iommu_num_pages(vaddr, s->length, PAGE_SIZE);
 
 		entry = iommu_range_alloc(dev, tbl, npages);
 		if (entry == bad_dma_address) {
@@ -464,7 +454,7 @@ static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	struct iommu_table *tbl = find_iommu_table(dev);
 
 	uaddr = (unsigned long)vaddr;
-	npages = num_dma_pages(uaddr, size);
+	npages = iommu_num_pages(uaddr, size, PAGE_SIZE);
 
 	return iommu_alloc(dev, tbl, vaddr, npages, direction);
 }
@@ -475,7 +465,7 @@ static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
 	struct iommu_table *tbl = find_iommu_table(dev);
 	unsigned int npages;
 
-	npages = num_dma_pages(dma_handle, size);
+	npages = iommu_num_pages(dma_handle, size, PAGE_SIZE);
 	iommu_free(tbl, dma_handle, npages);
 }
 
@@ -491,6 +481,8 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size,
 	npages = size >> PAGE_SHIFT;
 	order = get_order(size);
 
+	flag &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+
 	/* alloc enough pages (and possibly more) */
 	ret = (void *)__get_free_pages(flag, order);
 	if (!ret)
@@ -510,8 +502,22 @@ error:
 	return ret;
 }
 
+static void calgary_free_coherent(struct device *dev, size_t size,
+				  void *vaddr, dma_addr_t dma_handle)
+{
+	unsigned int npages;
+	struct iommu_table *tbl = find_iommu_table(dev);
+
+	size = PAGE_ALIGN(size);
+	npages = size >> PAGE_SHIFT;
+
+	iommu_free(tbl, dma_handle, npages);
+	free_pages((unsigned long)vaddr, get_order(size));
+}
+
 static struct dma_mapping_ops calgary_dma_ops = {
 	.alloc_coherent = calgary_alloc_coherent,
+	.free_coherent = calgary_free_coherent,
 	.map_single = calgary_map_single,
 	.unmap_single = calgary_unmap_single,
 	.map_sg = calgary_map_sg,
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 87d4d69..1972266 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -9,8 +9,6 @@
 #include <asm/calgary.h>
 #include <asm/amd_iommu.h>
 
-static int forbid_dac __read_mostly;
-
 struct dma_mapping_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
@@ -41,11 +39,12 @@ EXPORT_SYMBOL(bad_dma_address);
 /* Dummy device used for NULL arguments (normally ISA). Better would
    be probably a smaller DMA mask, but this is bug-to-bug compatible
    to older i386. */
-struct device fallback_dev = {
+struct device x86_dma_fallback_dev = {
 	.bus_id = "fallback device",
 	.coherent_dma_mask = DMA_32BIT_MASK,
-	.dma_mask = &fallback_dev.coherent_dma_mask,
+	.dma_mask = &x86_dma_fallback_dev.coherent_dma_mask,
 };
+EXPORT_SYMBOL(x86_dma_fallback_dev);
 
 int dma_set_mask(struct device *dev, u64 mask)
 {
@@ -82,7 +81,7 @@ void __init dma32_reserve_bootmem(void)
 	 * using 512M as goal
 	 */
 	align = 64ULL<<20;
-	size = round_up(dma32_bootmem_size, align);
+	size = roundup(dma32_bootmem_size, align);
 	dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
 				 512ULL<<20);
 	if (dma32_bootmem_ptr)
@@ -124,15 +123,46 @@ void __init pci_iommu_alloc(void)
 	pci_swiotlb_init();
 }
 
-unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
+unsigned long iommu_nr_pages(unsigned long addr, unsigned long len)
 {
 	unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
 
 	return size >> PAGE_SHIFT;
 }
-EXPORT_SYMBOL(iommu_num_pages);
+EXPORT_SYMBOL(iommu_nr_pages);
 #endif
 
+void *dma_generic_alloc_coherent(struct device *dev, size_t size,
+				 dma_addr_t *dma_addr, gfp_t flag)
+{
+	unsigned long dma_mask;
+	struct page *page;
+	dma_addr_t addr;
+
+	dma_mask = dma_alloc_coherent_mask(dev, flag);
+
+	flag |= __GFP_ZERO;
+again:
+	page = alloc_pages_node(dev_to_node(dev), flag, get_order(size));
+	if (!page)
+		return NULL;
+
+	addr = page_to_phys(page);
+	if (!is_buffer_dma_capable(dma_mask, addr, size)) {
+		__free_pages(page, get_order(size));
+
+		if (dma_mask < DMA_32BIT_MASK && !(flag & GFP_DMA)) {
+			flag = (flag & ~GFP_DMA32) | GFP_DMA;
+			goto again;
+		}
+
+		return NULL;
+	}
+
+	*dma_addr = addr;
+	return page_address(page);
+}
+
 /*
  * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
  * documentation.
@@ -241,147 +271,6 @@ int dma_supported(struct device *dev, u64 mask)
 }
 EXPORT_SYMBOL(dma_supported);
 
-/* Allocate DMA memory on node near device */
-static noinline struct page *
-dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
-{
-	int node;
-
-	node = dev_to_node(dev);
-
-	return alloc_pages_node(node, gfp, order);
-}
-
-/*
- * Allocate memory for a coherent mapping.
- */
-void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		   gfp_t gfp)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(dev);
-	void *memory = NULL;
-	struct page *page;
-	unsigned long dma_mask = 0;
-	dma_addr_t bus;
-	int noretry = 0;
-
-	/* ignore region specifiers */
-	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
-
-	if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
-		return memory;
-
-	if (!dev) {
-		dev = &fallback_dev;
-		gfp |= GFP_DMA;
-	}
-	dma_mask = dev->coherent_dma_mask;
-	if (dma_mask == 0)
-		dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK;
-
-	/* Device not DMA able */
-	if (dev->dma_mask == NULL)
-		return NULL;
-
-	/* Don't invoke OOM killer or retry in lower 16MB DMA zone */
-	if (gfp & __GFP_DMA)
-		noretry = 1;
-
-#ifdef CONFIG_X86_64
-	/* Why <=? Even when the mask is smaller than 4GB it is often
-	   larger than 16MB and in this case we have a chance of
-	   finding fitting memory in the next higher zone first. If
-	   not retry with true GFP_DMA. -AK */
-	if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
-		gfp |= GFP_DMA32;
-		if (dma_mask < DMA_32BIT_MASK)
-			noretry = 1;
-	}
-#endif
-
- again:
-	page = dma_alloc_pages(dev,
-		noretry ? gfp | __GFP_NORETRY : gfp, get_order(size));
-	if (page == NULL)
-		return NULL;
-
-	{
-		int high, mmu;
-		bus = page_to_phys(page);
-		memory = page_address(page);
-		high = (bus + size) >= dma_mask;
-		mmu = high;
-		if (force_iommu && !(gfp & GFP_DMA))
-			mmu = 1;
-		else if (high) {
-			free_pages((unsigned long)memory,
-				   get_order(size));
-
-			/* Don't use the 16MB ZONE_DMA unless absolutely
-			   needed. It's better to use remapping first. */
-			if (dma_mask < DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
-				gfp = (gfp & ~GFP_DMA32) | GFP_DMA;
-				goto again;
-			}
-
-			/* Let low level make its own zone decisions */
-			gfp &= ~(GFP_DMA32|GFP_DMA);
-
-			if (ops->alloc_coherent)
-				return ops->alloc_coherent(dev, size,
-							   dma_handle, gfp);
-			return NULL;
-		}
-
-		memset(memory, 0, size);
-		if (!mmu) {
-			*dma_handle = bus;
-			return memory;
-		}
-	}
-
-	if (ops->alloc_coherent) {
-		free_pages((unsigned long)memory, get_order(size));
-		gfp &= ~(GFP_DMA|GFP_DMA32);
-		return ops->alloc_coherent(dev, size, dma_handle, gfp);
-	}
-
-	if (ops->map_simple) {
-		*dma_handle = ops->map_simple(dev, virt_to_phys(memory),
-					      size,
-					      PCI_DMA_BIDIRECTIONAL);
-		if (*dma_handle != bad_dma_address)
-			return memory;
-	}
-
-	if (panic_on_overflow)
-		panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n",
-		      (unsigned long)size);
-	free_pages((unsigned long)memory, get_order(size));
-	return NULL;
-}
-EXPORT_SYMBOL(dma_alloc_coherent);
-
-/*
- * Unmap coherent memory.
- * The caller must ensure that the device has finished accessing the mapping.
- */
-void dma_free_coherent(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t bus)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(dev);
-
-	int order = get_order(size);
-	WARN_ON(irqs_disabled());	/* for portability */
-	if (dma_release_from_coherent(dev, order, vaddr))
-		return;
-	if (ops->unmap_single)
-		ops->unmap_single(dev, bus, size, 0);
-	free_pages((unsigned long)vaddr, order);
-}
-EXPORT_SYMBOL(dma_free_coherent);
-
 static int __init pci_iommu_init(void)
 {
 	calgary_iommu_init();
@@ -402,17 +291,3 @@ void pci_iommu_shutdown(void)
 }
 /* Must execute after PCI subsystem */
 fs_initcall(pci_iommu_init);
-
-#ifdef CONFIG_PCI
-/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
-
-static __devinit void via_no_dac(struct pci_dev *dev)
-{
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
-		printk(KERN_INFO "PCI: VIA PCI bridge detected."
-				 "Disabling DAC.\n");
-		forbid_dac = 1;
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
-#endif
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 49285f8..e3f75bb 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -27,8 +27,8 @@
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 #include <asm/atomic.h>
-#include <asm/io.h>
 #include <asm/mtrr.h>
 #include <asm/pgtable.h>
 #include <asm/proto.h>
@@ -80,9 +80,10 @@ AGPEXTERN int agp_memory_reserved;
 AGPEXTERN __u32 *agp_gatt_table;
 
 static unsigned long next_bit;  /* protected by iommu_bitmap_lock */
-static int need_flush;		/* global flush state. set for each gart wrap */
+static bool need_flush;		/* global flush state. set for each gart wrap */
 
-static unsigned long alloc_iommu(struct device *dev, int size)
+static unsigned long alloc_iommu(struct device *dev, int size,
+				 unsigned long align_mask)
 {
 	unsigned long offset, flags;
 	unsigned long boundary_size;
@@ -90,26 +91,27 @@ static unsigned long alloc_iommu(struct device *dev, int size)
 
 	base_index = ALIGN(iommu_bus_base & dma_get_seg_boundary(dev),
 			   PAGE_SIZE) >> PAGE_SHIFT;
-	boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+	boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1,
 			      PAGE_SIZE) >> PAGE_SHIFT;
 
 	spin_lock_irqsave(&iommu_bitmap_lock, flags);
 	offset = iommu_area_alloc(iommu_gart_bitmap, iommu_pages, next_bit,
-				  size, base_index, boundary_size, 0);
+				  size, base_index, boundary_size, align_mask);
 	if (offset == -1) {
-		need_flush = 1;
+		need_flush = true;
 		offset = iommu_area_alloc(iommu_gart_bitmap, iommu_pages, 0,
-					  size, base_index, boundary_size, 0);
+					  size, base_index, boundary_size,
+					  align_mask);
 	}
 	if (offset != -1) {
 		next_bit = offset+size;
 		if (next_bit >= iommu_pages) {
 			next_bit = 0;
-			need_flush = 1;
+			need_flush = true;
 		}
 	}
 	if (iommu_fullflush)
-		need_flush = 1;
+		need_flush = true;
 	spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
 
 	return offset;
@@ -134,7 +136,7 @@ static void flush_gart(void)
 	spin_lock_irqsave(&iommu_bitmap_lock, flags);
 	if (need_flush) {
 		k8_flush_garts();
-		need_flush = 0;
+		need_flush = false;
 	}
 	spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
 }
@@ -173,7 +175,8 @@ static void dump_leak(void)
 	       iommu_leak_pages);
 	for (i = 0; i < iommu_leak_pages; i += 2) {
 		printk(KERN_DEBUG "%lu: ", iommu_pages-i);
-		printk_address((unsigned long) iommu_leak_tab[iommu_pages-i], 0);
+		printk_address((unsigned long) iommu_leak_tab[iommu_pages-i],
+				0);
 		printk(KERN_CONT "%c", (i+1)%2 == 0 ? '\n' : ' ');
 	}
 	printk(KERN_DEBUG "\n");
@@ -212,34 +215,24 @@ static void iommu_full(struct device *dev, size_t size, int dir)
 static inline int
 need_iommu(struct device *dev, unsigned long addr, size_t size)
 {
-	u64 mask = *dev->dma_mask;
-	int high = addr + size > mask;
-	int mmu = high;
-
-	if (force_iommu)
-		mmu = 1;
-
-	return mmu;
+	return force_iommu ||
+		!is_buffer_dma_capable(*dev->dma_mask, addr, size);
 }
 
 static inline int
 nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
 {
-	u64 mask = *dev->dma_mask;
-	int high = addr + size > mask;
-	int mmu = high;
-
-	return mmu;
+	return !is_buffer_dma_capable(*dev->dma_mask, addr, size);
 }
 
 /* Map a single continuous physical area into the IOMMU.
  * Caller needs to check if the iommu is needed and flush.
  */
 static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
-				size_t size, int dir)
+				size_t size, int dir, unsigned long align_mask)
 {
-	unsigned long npages = iommu_num_pages(phys_mem, size);
-	unsigned long iommu_page = alloc_iommu(dev, npages);
+	unsigned long npages = iommu_num_pages(phys_mem, size, PAGE_SIZE);
+	unsigned long iommu_page = alloc_iommu(dev, npages, align_mask);
 	int i;
 
 	if (iommu_page == -1) {
@@ -259,16 +252,6 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 	return iommu_bus_base + iommu_page*PAGE_SIZE + (phys_mem & ~PAGE_MASK);
 }
 
-static dma_addr_t
-gart_map_simple(struct device *dev, phys_addr_t paddr, size_t size, int dir)
-{
-	dma_addr_t map = dma_map_area(dev, paddr, size, dir);
-
-	flush_gart();
-
-	return map;
-}
-
 /* Map a single area into the IOMMU */
 static dma_addr_t
 gart_map_single(struct device *dev, phys_addr_t paddr, size_t size, int dir)
@@ -276,12 +259,13 @@ gart_map_single(struct device *dev, phys_addr_t paddr, size_t size, int dir)
 	unsigned long bus;
 
 	if (!dev)
-		dev = &fallback_dev;
+		dev = &x86_dma_fallback_dev;
 
 	if (!need_iommu(dev, paddr, size))
 		return paddr;
 
-	bus = gart_map_simple(dev, paddr, size, dir);
+	bus = dma_map_area(dev, paddr, size, dir, 0);
+	flush_gart();
 
 	return bus;
 }
@@ -301,7 +285,7 @@ static void gart_unmap_single(struct device *dev, dma_addr_t dma_addr,
 		return;
 
 	iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT;
-	npages = iommu_num_pages(dma_addr, size);
+	npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
 	for (i = 0; i < npages; i++) {
 		iommu_gatt_base[iommu_page + i] = gart_unmapped_entry;
 		CLEAR_LEAK(iommu_page + i);
@@ -340,7 +324,7 @@ static int dma_map_sg_nonforce(struct device *dev, struct scatterlist *sg,
 		unsigned long addr = sg_phys(s);
 
 		if (nonforced_iommu(dev, addr, s->length)) {
-			addr = dma_map_area(dev, addr, s->length, dir);
+			addr = dma_map_area(dev, addr, s->length, dir, 0);
 			if (addr == bad_dma_address) {
 				if (i > 0)
 					gart_unmap_sg(dev, sg, i, dir);
@@ -362,7 +346,7 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start,
 			  int nelems, struct scatterlist *sout,
 			  unsigned long pages)
 {
-	unsigned long iommu_start = alloc_iommu(dev, pages);
+	unsigned long iommu_start = alloc_iommu(dev, pages, 0);
 	unsigned long iommu_page = iommu_start;
 	struct scatterlist *s;
 	int i;
@@ -384,7 +368,7 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start,
 		}
 
 		addr = phys_addr;
-		pages = iommu_num_pages(s->offset, s->length);
+		pages = iommu_num_pages(s->offset, s->length, PAGE_SIZE);
 		while (pages--) {
 			iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr);
 			SET_LEAK(iommu_page);
@@ -427,7 +411,7 @@ gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir)
 		return 0;
 
 	if (!dev)
-		dev = &fallback_dev;
+		dev = &x86_dma_fallback_dev;
 
 	out = 0;
 	start = 0;
@@ -467,7 +451,7 @@ gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir)
 
 		seg_size += s->length;
 		need = nextneed;
-		pages += iommu_num_pages(s->offset, s->length);
+		pages += iommu_num_pages(s->offset, s->length, PAGE_SIZE);
 		ps = s;
 	}
 	if (dma_map_cont(dev, start_sg, i - start, sgmap, pages, need) < 0)
@@ -499,6 +483,46 @@ error:
 	return 0;
 }
 
+/* allocate and map a coherent mapping */
+static void *
+gart_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_addr,
+		    gfp_t flag)
+{
+	dma_addr_t paddr;
+	unsigned long align_mask;
+	struct page *page;
+
+	if (force_iommu && !(flag & GFP_DMA)) {
+		flag &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+		page = alloc_pages(flag | __GFP_ZERO, get_order(size));
+		if (!page)
+			return NULL;
+
+		align_mask = (1UL << get_order(size)) - 1;
+		paddr = dma_map_area(dev, page_to_phys(page), size,
+				     DMA_BIDIRECTIONAL, align_mask);
+
+		flush_gart();
+		if (paddr != bad_dma_address) {
+			*dma_addr = paddr;
+			return page_address(page);
+		}
+		__free_pages(page, get_order(size));
+	} else
+		return dma_generic_alloc_coherent(dev, size, dma_addr, flag);
+
+	return NULL;
+}
+
+/* free a coherent mapping */
+static void
+gart_free_coherent(struct device *dev, size_t size, void *vaddr,
+		   dma_addr_t dma_addr)
+{
+	gart_unmap_single(dev, dma_addr, size, DMA_BIDIRECTIONAL);
+	free_pages((unsigned long)vaddr, get_order(size));
+}
+
 static int no_agp;
 
 static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size)
@@ -626,7 +650,6 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	struct pci_dev *dev;
 	void *gatt;
 	int i, error;
-	unsigned long start_pfn, end_pfn;
 
 	printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
 	aper_size = aper_base = info->aper_size = 0;
@@ -650,13 +673,13 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	info->aper_size = aper_size >> 20;
 
 	gatt_size = (aper_size >> PAGE_SHIFT) * sizeof(u32);
-	gatt = (void *)__get_free_pages(GFP_KERNEL, get_order(gatt_size));
+	gatt = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+					get_order(gatt_size));
 	if (!gatt)
 		panic("Cannot allocate GATT table");
 	if (set_memory_uc((unsigned long)gatt, gatt_size >> PAGE_SHIFT))
 		panic("Could not set GART PTEs to uncacheable pages");
 
-	memset(gatt, 0, gatt_size);
 	agp_gatt_table = gatt;
 
 	enable_gart_translations();
@@ -665,19 +688,14 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	if (!error)
 		error = sysdev_register(&device_gart);
 	if (error)
-		panic("Could not register gart_sysdev -- would corrupt data on next suspend");
+		panic("Could not register gart_sysdev -- "
+		      "would corrupt data on next suspend");
 
 	flush_gart();
 
 	printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
 	       aper_base, aper_size>>10);
 
-	/* need to map that range */
-	end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
-	if (end_pfn > max_low_pfn_mapped) {
-		start_pfn = (aper_base>>PAGE_SHIFT);
-		init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
-	}
 	return 0;
 
  nommu:
@@ -687,20 +705,13 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	return -1;
 }
 
-extern int agp_amd64_init(void);
-
 static struct dma_mapping_ops gart_dma_ops = {
 	.map_single			= gart_map_single,
-	.map_simple			= gart_map_simple,
 	.unmap_single			= gart_unmap_single,
-	.sync_single_for_cpu		= NULL,
-	.sync_single_for_device		= NULL,
-	.sync_single_range_for_cpu	= NULL,
-	.sync_single_range_for_device	= NULL,
-	.sync_sg_for_cpu		= NULL,
-	.sync_sg_for_device		= NULL,
 	.map_sg				= gart_map_sg,
 	.unmap_sg			= gart_unmap_sg,
+	.alloc_coherent			= gart_alloc_coherent,
+	.free_coherent			= gart_free_coherent,
 };
 
 void gart_iommu_shutdown(void)
@@ -727,7 +738,8 @@ void __init gart_iommu_init(void)
 {
 	struct agp_kern_info info;
 	unsigned long iommu_start;
-	unsigned long aper_size;
+	unsigned long aper_base, aper_size;
+	unsigned long start_pfn, end_pfn;
 	unsigned long scratch;
 	long i;
 
@@ -759,30 +771,35 @@ void __init gart_iommu_init(void)
 	    (no_agp && init_k8_gatt(&info) < 0)) {
 		if (max_pfn > MAX_DMA32_PFN) {
 			printk(KERN_WARNING "More than 4GB of memory "
-			       	          "but GART IOMMU not available.\n"
-			       KERN_WARNING "falling back to iommu=soft.\n");
+			       "but GART IOMMU not available.\n");
+			printk(KERN_WARNING "falling back to iommu=soft.\n");
 		}
 		return;
 	}
 
+	/* need to map that range */
+	aper_size = info.aper_size << 20;
+	aper_base = info.aper_base;
+	end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
+	if (end_pfn > max_low_pfn_mapped) {
+		start_pfn = (aper_base>>PAGE_SHIFT);
+		init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
+	}
+
 	printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
-	aper_size = info.aper_size * 1024 * 1024;
 	iommu_size = check_iommu_size(info.aper_base, aper_size);
 	iommu_pages = iommu_size >> PAGE_SHIFT;
 
-	iommu_gart_bitmap = (void *) __get_free_pages(GFP_KERNEL,
+	iommu_gart_bitmap = (void *) __get_free_pages(GFP_KERNEL | __GFP_ZERO,
 						      get_order(iommu_pages/8));
 	if (!iommu_gart_bitmap)
 		panic("Cannot allocate iommu bitmap\n");
-	memset(iommu_gart_bitmap, 0, iommu_pages/8);
 
 #ifdef CONFIG_IOMMU_LEAK
 	if (leak_trace) {
-		iommu_leak_tab = (void *)__get_free_pages(GFP_KERNEL,
+		iommu_leak_tab = (void *)__get_free_pages(GFP_KERNEL|__GFP_ZERO,
 				  get_order(iommu_pages*sizeof(void *)));
-		if (iommu_leak_tab)
-			memset(iommu_leak_tab, 0, iommu_pages * 8);
-		else
+		if (!iommu_leak_tab)
 			printk(KERN_DEBUG
 			       "PCI-DMA: Cannot allocate leak trace area\n");
 	}
@@ -792,7 +809,7 @@ void __init gart_iommu_init(void)
 	 * Out of IOMMU space handling.
 	 * Reserve some invalid pages at the beginning of the GART.
 	 */
-	set_bit_string(iommu_gart_bitmap, 0, EMERGENCY_PAGES);
+	iommu_area_reserve(iommu_gart_bitmap, 0, EMERGENCY_PAGES);
 
 	agp_memory_reserved = iommu_size;
 	printk(KERN_INFO
@@ -850,7 +867,8 @@ void __init gart_parse_options(char *p)
 	if (!strncmp(p, "leak", 4)) {
 		leak_trace = 1;
 		p += 4;
-		if (*p == '=') ++p;
+		if (*p == '=')
+			++p;
 		if (isdigit(*p) && get_option(&p, &arg))
 			iommu_leak_pages = arg;
 	}
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index 3f91f71..c70ab5a 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -14,7 +14,7 @@
 static int
 check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
 {
-	if (hwdev && bus + size > *hwdev->dma_mask) {
+	if (hwdev && !is_buffer_dma_capable(*hwdev->dma_mask, bus, size)) {
 		if (*hwdev->dma_mask >= DMA_32BIT_MASK)
 			printk(KERN_ERR
 			    "nommu_%s: overflow %Lx+%zu of device mask %Lx\n",
@@ -72,7 +72,15 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
 	return nents;
 }
 
+static void nommu_free_coherent(struct device *dev, size_t size, void *vaddr,
+				dma_addr_t dma_addr)
+{
+	free_pages((unsigned long)vaddr, get_order(size));
+}
+
 struct dma_mapping_ops nommu_dma_ops = {
+	.alloc_coherent = dma_generic_alloc_coherent,
+	.free_coherent = nommu_free_coherent,
 	.map_single = nommu_map_single,
 	.map_sg = nommu_map_sg,
 	.is_phys = 1,
diff --git a/arch/x86/kernel/pcspeaker.c b/arch/x86/kernel/pcspeaker.c
index bc1f2d3..a311ffc 100644
--- a/arch/x86/kernel/pcspeaker.c
+++ b/arch/x86/kernel/pcspeaker.c
@@ -1,20 +1,13 @@
 #include <linux/platform_device.h>
-#include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/init.h>
 
 static __init int add_pcspkr(void)
 {
 	struct platform_device *pd;
-	int ret;
 
-	pd = platform_device_alloc("pcspkr", -1);
-	if (!pd)
-		return -ENOMEM;
+	pd = platform_device_register_simple("pcspkr", -1, NULL, 0);
 
-	ret = platform_device_add(pd);
-	if (ret)
-		platform_device_put(pd);
-
-	return ret;
+	return IS_ERR(pd) ? PTR_ERR(pd) : 0;
 }
 device_initcall(add_pcspkr);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 7fc4d5b..c622772 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -15,7 +15,6 @@ unsigned long idle_nomwait;
 EXPORT_SYMBOL(idle_nomwait);
 
 struct kmem_cache *task_xstate_cachep;
-static int force_mwait __cpuinitdata;
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
@@ -185,7 +184,8 @@ static void mwait_idle(void)
 static void poll_idle(void)
 {
 	local_irq_enable();
-	cpu_relax();
+	while (!need_resched())
+		cpu_relax();
 }
 
 /*
@@ -246,6 +246,14 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
 	return 1;
 }
 
+static cpumask_t c1e_mask = CPU_MASK_NONE;
+static int c1e_detected;
+
+void c1e_remove_cpu(int cpu)
+{
+	cpu_clear(cpu, c1e_mask);
+}
+
 /*
  * C1E aware idle routine. We check for C1E active in the interrupt
  * pending message MSR. If we detect C1E, then we handle it the same
@@ -253,9 +261,6 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
  */
 static void c1e_idle(void)
 {
-	static cpumask_t c1e_mask = CPU_MASK_NONE;
-	static int c1e_detected;
-
 	if (need_resched())
 		return;
 
@@ -265,8 +270,10 @@ static void c1e_idle(void)
 		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
 		if (lo & K8_INTP_C1E_ACTIVE_MASK) {
 			c1e_detected = 1;
-			mark_tsc_unstable("TSC halt in C1E");
-			printk(KERN_INFO "System has C1E enabled\n");
+			if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+				mark_tsc_unstable("TSC halt in AMD C1E");
+			printk(KERN_INFO "System has AMD C1E enabled\n");
+			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
 		}
 	}
 
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 3b7a1dd..0a1302f 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -37,6 +37,7 @@
 #include <linux/tick.h>
 #include <linux/percpu.h>
 #include <linux/prctl.h>
+#include <linux/dmi.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -55,6 +56,9 @@
 #include <asm/tlbflush.h>
 #include <asm/cpu.h>
 #include <asm/kdebug.h>
+#include <asm/idle.h>
+#include <asm/syscalls.h>
+#include <asm/smp.h>
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
@@ -72,46 +76,12 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return ((unsigned long *)tsk->thread.sp)[3];
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-#include <asm/nmi.h>
-
-static void cpu_exit_clear(void)
-{
-	int cpu = raw_smp_processor_id();
-
-	idle_task_exit();
-
-	cpu_uninit();
-	irq_ctx_exit(cpu);
-
-	cpu_clear(cpu, cpu_callout_map);
-	cpu_clear(cpu, cpu_callin_map);
-
-	numa_remove_cpu(cpu);
-}
-
-/* We don't actually take CPU down, just spin without interrupts. */
-static inline void play_dead(void)
-{
-	/* This must be done before dead CPU ack */
-	cpu_exit_clear();
-	mb();
-	/* Ack it */
-	__get_cpu_var(cpu_state) = CPU_DEAD;
-
-	/*
-	 * With physical CPU hotplug, we should halt the cpu
-	 */
-	local_irq_disable();
-	/* mask all interrupts, flush any and all caches, and halt */
-	wbinvd_halt();
-}
-#else
+#ifndef CONFIG_SMP
 static inline void play_dead(void)
 {
 	BUG();
 }
-#endif /* CONFIG_HOTPLUG_CPU */
+#endif
 
 /*
  * The idle thread. There's no useful work to be
@@ -153,12 +123,13 @@ void cpu_idle(void)
 	}
 }
 
-void __show_registers(struct pt_regs *regs, int all)
+void __show_regs(struct pt_regs *regs, int all)
 {
 	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
 	unsigned long d0, d1, d2, d3, d6, d7;
 	unsigned long sp;
 	unsigned short ss, gs;
+	const char *board;
 
 	if (user_mode_vm(regs)) {
 		sp = regs->sp;
@@ -171,11 +142,15 @@ void __show_registers(struct pt_regs *regs, int all)
 	}
 
 	printk("\n");
-	printk("Pid: %d, comm: %s %s (%s %.*s)\n",
+
+	board = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (!board)
+		board = "";
+	printk("Pid: %d, comm: %s %s (%s %.*s) %s\n",
 			task_pid_nr(current), current->comm,
 			print_tainted(), init_utsname()->release,
 			(int)strcspn(init_utsname()->version, " "),
-			init_utsname()->version);
+			init_utsname()->version, board);
 
 	printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
 			(u16)regs->cs, regs->ip, regs->flags,
@@ -214,7 +189,7 @@ void __show_registers(struct pt_regs *regs, int all)
 
 void show_regs(struct pt_regs *regs)
 {
-	__show_registers(regs, 1);
+	__show_regs(regs, 1);
 	show_trace(NULL, regs, &regs->sp, regs->bp);
 }
 
@@ -275,6 +250,14 @@ void exit_thread(void)
 		tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
 		put_cpu();
 	}
+#ifdef CONFIG_X86_DS
+	/* Free any DS contexts that have not been properly released. */
+	if (unlikely(current->thread.ds_ctx)) {
+		/* we clear debugctl to make sure DS is not used. */
+		update_debugctlmsr(0);
+		ds_free(current->thread.ds_ctx);
+	}
+#endif /* CONFIG_X86_DS */
 }
 
 void flush_thread(void)
@@ -436,6 +419,35 @@ int set_tsc_mode(unsigned int val)
 	return 0;
 }
 
+#ifdef CONFIG_X86_DS
+static int update_debugctl(struct thread_struct *prev,
+			struct thread_struct *next, unsigned long debugctl)
+{
+	unsigned long ds_prev = 0;
+	unsigned long ds_next = 0;
+
+	if (prev->ds_ctx)
+		ds_prev = (unsigned long)prev->ds_ctx->ds;
+	if (next->ds_ctx)
+		ds_next = (unsigned long)next->ds_ctx->ds;
+
+	if (ds_next != ds_prev) {
+		/* we clear debugctl to make sure DS
+		 * is not in use when we change it */
+		debugctl = 0;
+		update_debugctlmsr(0);
+		wrmsr(MSR_IA32_DS_AREA, ds_next, 0);
+	}
+	return debugctl;
+}
+#else
+static int update_debugctl(struct thread_struct *prev,
+			struct thread_struct *next, unsigned long debugctl)
+{
+	return debugctl;
+}
+#endif /* CONFIG_X86_DS */
+
 static noinline void
 __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 		 struct tss_struct *tss)
@@ -446,14 +458,7 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 	prev = &prev_p->thread;
 	next = &next_p->thread;
 
-	debugctl = prev->debugctlmsr;
-	if (next->ds_area_msr != prev->ds_area_msr) {
-		/* we clear debugctl to make sure DS
-		 * is not in use when we change it */
-		debugctl = 0;
-		update_debugctlmsr(0);
-		wrmsr(MSR_IA32_DS_AREA, next->ds_area_msr, 0);
-	}
+	debugctl = update_debugctl(prev, next, prev->debugctlmsr);
 
 	if (next->debugctlmsr != debugctl)
 		update_debugctlmsr(next->debugctlmsr);
@@ -477,13 +482,13 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 			hard_enable_TSC();
 	}
 
-#ifdef X86_BTS
+#ifdef CONFIG_X86_PTRACE_BTS
 	if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
 		ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS);
 
 	if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS))
 		ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES);
-#endif
+#endif /* CONFIG_X86_PTRACE_BTS */
 
 
 	if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 71553b6..c958120f 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -37,11 +37,11 @@
 #include <linux/kdebug.h>
 #include <linux/tick.h>
 #include <linux/prctl.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
-#include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
-#include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/i387.h>
 #include <asm/mmu_context.h>
@@ -51,6 +51,7 @@
 #include <asm/proto.h>
 #include <asm/ia32.h>
 #include <asm/idle.h>
+#include <asm/syscalls.h>
 
 asmlinkage extern void ret_from_fork(void);
 
@@ -62,6 +63,13 @@ void idle_notifier_register(struct notifier_block *n)
 {
 	atomic_notifier_chain_register(&idle_notifier, n);
 }
+EXPORT_SYMBOL_GPL(idle_notifier_register);
+
+void idle_notifier_unregister(struct notifier_block *n)
+{
+	atomic_notifier_chain_unregister(&idle_notifier, n);
+}
+EXPORT_SYMBOL_GPL(idle_notifier_unregister);
 
 void enter_idle(void)
 {
@@ -85,28 +93,12 @@ void exit_idle(void)
 	__exit_idle();
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-DECLARE_PER_CPU(int, cpu_state);
-
-#include <asm/nmi.h>
-/* We halt the CPU with physical CPU hotplug */
-static inline void play_dead(void)
-{
-	idle_task_exit();
-	mb();
-	/* Ack it */
-	__get_cpu_var(cpu_state) = CPU_DEAD;
-
-	local_irq_disable();
-	/* mask all interrupts, flush any and all caches, and halt */
-	wbinvd_halt();
-}
-#else
+#ifndef CONFIG_SMP
 static inline void play_dead(void)
 {
 	BUG();
 }
-#endif /* CONFIG_HOTPLUG_CPU */
+#endif
 
 /*
  * The idle thread. There's no useful work to be
@@ -151,7 +143,7 @@ void cpu_idle(void)
 }
 
 /* Prints also some state that isn't saved in the pt_regs */
-void __show_regs(struct pt_regs * regs)
+void __show_regs(struct pt_regs *regs, int all)
 {
 	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs;
 	unsigned long d0, d1, d2, d3, d6, d7;
@@ -160,60 +152,65 @@ void __show_regs(struct pt_regs * regs)
 
 	printk("\n");
 	print_modules();
-	printk("Pid: %d, comm: %.20s %s %s %.*s\n",
+	printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s\n",
 		current->pid, current->comm, print_tainted(),
 		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
-	printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
+	printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
 	printk_address(regs->ip, 1);
-	printk("RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss, regs->sp,
-		regs->flags);
-	printk("RAX: %016lx RBX: %016lx RCX: %016lx\n",
+	printk(KERN_INFO "RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss,
+			regs->sp, regs->flags);
+	printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n",
 	       regs->ax, regs->bx, regs->cx);
-	printk("RDX: %016lx RSI: %016lx RDI: %016lx\n",
+	printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n",
 	       regs->dx, regs->si, regs->di);
-	printk("RBP: %016lx R08: %016lx R09: %016lx\n",
+	printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n",
 	       regs->bp, regs->r8, regs->r9);
-	printk("R10: %016lx R11: %016lx R12: %016lx\n",
-	       regs->r10, regs->r11, regs->r12); 
-	printk("R13: %016lx R14: %016lx R15: %016lx\n",
-	       regs->r13, regs->r14, regs->r15); 
-
-	asm("movl %%ds,%0" : "=r" (ds)); 
-	asm("movl %%cs,%0" : "=r" (cs)); 
-	asm("movl %%es,%0" : "=r" (es)); 
+	printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n",
+	       regs->r10, regs->r11, regs->r12);
+	printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n",
+	       regs->r13, regs->r14, regs->r15);
+
+	asm("movl %%ds,%0" : "=r" (ds));
+	asm("movl %%cs,%0" : "=r" (cs));
+	asm("movl %%es,%0" : "=r" (es));
 	asm("movl %%fs,%0" : "=r" (fsindex));
 	asm("movl %%gs,%0" : "=r" (gsindex));
 
 	rdmsrl(MSR_FS_BASE, fs);
-	rdmsrl(MSR_GS_BASE, gs); 
-	rdmsrl(MSR_KERNEL_GS_BASE, shadowgs); 
+	rdmsrl(MSR_GS_BASE, gs);
+	rdmsrl(MSR_KERNEL_GS_BASE, shadowgs);
+
+	if (!all)
+		return;
 
 	cr0 = read_cr0();
 	cr2 = read_cr2();
 	cr3 = read_cr3();
 	cr4 = read_cr4();
 
-	printk("FS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", 
-	       fs,fsindex,gs,gsindex,shadowgs); 
-	printk("CS:  %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, es, cr0); 
-	printk("CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, cr4);
+	printk(KERN_INFO "FS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
+	       fs, fsindex, gs, gsindex, shadowgs);
+	printk(KERN_INFO "CS:  %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds,
+			es, cr0);
+	printk(KERN_INFO "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3,
+			cr4);
 
 	get_debugreg(d0, 0);
 	get_debugreg(d1, 1);
 	get_debugreg(d2, 2);
-	printk("DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
+	printk(KERN_INFO "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
 	get_debugreg(d3, 3);
 	get_debugreg(d6, 6);
 	get_debugreg(d7, 7);
-	printk("DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
+	printk(KERN_INFO "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
 }
 
 void show_regs(struct pt_regs *regs)
 {
-	printk("CPU %d:", smp_processor_id());
-	__show_regs(regs);
+	printk(KERN_INFO "CPU %d:", smp_processor_id());
+	__show_regs(regs, 1);
 	show_trace(NULL, regs, (void *)(regs + 1), regs->bp);
 }
 
@@ -238,6 +235,14 @@ void exit_thread(void)
 		t->io_bitmap_max = 0;
 		put_cpu();
 	}
+#ifdef CONFIG_X86_DS
+	/* Free any DS contexts that have not been properly released. */
+	if (unlikely(t->ds_ctx)) {
+		/* we clear debugctl to make sure DS is not used. */
+		update_debugctlmsr(0);
+		ds_free(t->ds_ctx);
+	}
+#endif /* CONFIG_X86_DS */
 }
 
 void flush_thread(void)
@@ -313,10 +318,10 @@ void prepare_to_copy(struct task_struct *tsk)
 
 int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 		unsigned long unused,
-	struct task_struct * p, struct pt_regs * regs)
+	struct task_struct *p, struct pt_regs *regs)
 {
 	int err;
-	struct pt_regs * childregs;
+	struct pt_regs *childregs;
 	struct task_struct *me = current;
 
 	childregs = ((struct pt_regs *)
@@ -361,10 +366,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 		if (test_thread_flag(TIF_IA32))
 			err = do_set_thread_area(p, -1,
 				(struct user_desc __user *)childregs->si, 0);
-		else 			
-#endif	 
-			err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8); 
-		if (err) 
+		else
+#endif
+			err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8);
+		if (err)
 			goto out;
 	}
 	err = 0;
@@ -471,13 +476,27 @@ static inline void __switch_to_xtra(struct task_struct *prev_p,
 	next = &next_p->thread;
 
 	debugctl = prev->debugctlmsr;
-	if (next->ds_area_msr != prev->ds_area_msr) {
-		/* we clear debugctl to make sure DS
-		 * is not in use when we change it */
-		debugctl = 0;
-		update_debugctlmsr(0);
-		wrmsrl(MSR_IA32_DS_AREA, next->ds_area_msr);
+
+#ifdef CONFIG_X86_DS
+	{
+		unsigned long ds_prev = 0, ds_next = 0;
+
+		if (prev->ds_ctx)
+			ds_prev = (unsigned long)prev->ds_ctx->ds;
+		if (next->ds_ctx)
+			ds_next = (unsigned long)next->ds_ctx->ds;
+
+		if (ds_next != ds_prev) {
+			/*
+			 * We clear debugctl to make sure DS
+			 * is not in use when we change it:
+			 */
+			debugctl = 0;
+			update_debugctlmsr(0);
+			wrmsrl(MSR_IA32_DS_AREA, ds_next);
+		}
 	}
+#endif /* CONFIG_X86_DS */
 
 	if (next->debugctlmsr != debugctl)
 		update_debugctlmsr(next->debugctlmsr);
@@ -515,13 +534,13 @@ static inline void __switch_to_xtra(struct task_struct *prev_p,
 		memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
 	}
 
-#ifdef X86_BTS
+#ifdef CONFIG_X86_PTRACE_BTS
 	if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
 		ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS);
 
 	if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS))
 		ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES);
-#endif
+#endif /* CONFIG_X86_PTRACE_BTS */
 }
 
 /*
@@ -543,7 +562,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	unsigned fsindex, gsindex;
 
 	/* we're going to use this soon, after a few expensive things */
-	if (next_p->fpu_counter>5)
+	if (next_p->fpu_counter > 5)
 		prefetch(next->xstate);
 
 	/*
@@ -551,13 +570,13 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 */
 	load_sp0(tss, next);
 
-	/* 
+	/*
 	 * Switch DS and ES.
 	 * This won't pick up thread selector changes, but I guess that is ok.
 	 */
 	savesegment(es, prev->es);
 	if (unlikely(next->es | prev->es))
-		loadsegment(es, next->es); 
+		loadsegment(es, next->es);
 
 	savesegment(ds, prev->ds);
 	if (unlikely(next->ds | prev->ds))
@@ -583,7 +602,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 */
 	arch_leave_lazy_cpu_mode();
 
-	/* 
+	/*
 	 * Switch FS and GS.
 	 *
 	 * Segment register != 0 always requires a reload.  Also
@@ -592,13 +611,13 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 */
 	if (unlikely(fsindex | next->fsindex | prev->fs)) {
 		loadsegment(fs, next->fsindex);
-		/* 
+		/*
 		 * Check if the user used a selector != 0; if yes
 		 *  clear 64bit base, since overloaded base is always
 		 *  mapped to the Null selector
 		 */
 		if (fsindex)
-			prev->fs = 0;				
+			prev->fs = 0;
 	}
 	/* when next process has a 64bit base use it */
 	if (next->fs)
@@ -608,7 +627,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	if (unlikely(gsindex | next->gsindex | prev->gs)) {
 		load_gs_index(next->gsindex);
 		if (gsindex)
-			prev->gs = 0;				
+			prev->gs = 0;
 	}
 	if (next->gs)
 		wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
@@ -617,12 +636,12 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	/* Must be after DS reload */
 	unlazy_fpu(prev_p);
 
-	/* 
+	/*
 	 * Switch the PDA and FPU contexts.
 	 */
 	prev->usersp = read_pda(oldrsp);
 	write_pda(oldrsp, next->usersp);
-	write_pda(pcurrent, next_p); 
+	write_pda(pcurrent, next_p);
 
 	write_pda(kernelstack,
 		  (unsigned long)task_stack_page(next_p) +
@@ -663,7 +682,7 @@ long sys_execve(char __user *name, char __user * __user *argv,
 		char __user * __user *envp, struct pt_regs *regs)
 {
 	long error;
-	char * filename;
+	char *filename;
 
 	filename = getname(name);
 	error = PTR_ERR(filename);
@@ -721,55 +740,55 @@ asmlinkage long sys_vfork(struct pt_regs *regs)
 unsigned long get_wchan(struct task_struct *p)
 {
 	unsigned long stack;
-	u64 fp,ip;
+	u64 fp, ip;
 	int count = 0;
 
-	if (!p || p == current || p->state==TASK_RUNNING)
-		return 0; 
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
 	stack = (unsigned long)task_stack_page(p);
-	if (p->thread.sp < stack || p->thread.sp > stack+THREAD_SIZE)
+	if (p->thread.sp < stack || p->thread.sp >= stack+THREAD_SIZE)
 		return 0;
 	fp = *(u64 *)(p->thread.sp);
-	do { 
+	do {
 		if (fp < (unsigned long)stack ||
-		    fp > (unsigned long)stack+THREAD_SIZE)
-			return 0; 
+		    fp >= (unsigned long)stack+THREAD_SIZE)
+			return 0;
 		ip = *(u64 *)(fp+8);
 		if (!in_sched_functions(ip))
 			return ip;
-		fp = *(u64 *)fp; 
-	} while (count++ < 16); 
+		fp = *(u64 *)fp;
+	} while (count++ < 16);
 	return 0;
 }
 
 long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
-{ 
-	int ret = 0; 
+{
+	int ret = 0;
 	int doit = task == current;
 	int cpu;
 
-	switch (code) { 
+	switch (code) {
 	case ARCH_SET_GS:
 		if (addr >= TASK_SIZE_OF(task))
-			return -EPERM; 
+			return -EPERM;
 		cpu = get_cpu();
-		/* handle small bases via the GDT because that's faster to 
+		/* handle small bases via the GDT because that's faster to
 		   switch. */
-		if (addr <= 0xffffffff) {  
-			set_32bit_tls(task, GS_TLS, addr); 
-			if (doit) { 
+		if (addr <= 0xffffffff) {
+			set_32bit_tls(task, GS_TLS, addr);
+			if (doit) {
 				load_TLS(&task->thread, cpu);
-				load_gs_index(GS_TLS_SEL); 
+				load_gs_index(GS_TLS_SEL);
 			}
-			task->thread.gsindex = GS_TLS_SEL; 
+			task->thread.gsindex = GS_TLS_SEL;
 			task->thread.gs = 0;
-		} else { 
+		} else {
 			task->thread.gsindex = 0;
 			task->thread.gs = addr;
 			if (doit) {
 				load_gs_index(0);
 				ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr);
-			} 
+			}
 		}
 		put_cpu();
 		break;
@@ -823,8 +842,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 				rdmsrl(MSR_KERNEL_GS_BASE, base);
 			else
 				base = task->thread.gs;
-		}
-		else
+		} else
 			base = task->thread.gs;
 		ret = put_user(base, (unsigned long __user *)addr);
 		break;
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index e37dccc..0a6d8c1 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -14,6 +14,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/user.h>
 #include <linux/elf.h>
 #include <linux/security.h>
@@ -39,7 +40,9 @@ enum x86_regset {
 	REGSET_GENERAL,
 	REGSET_FP,
 	REGSET_XFP,
+	REGSET_IOPERM64 = REGSET_XFP,
 	REGSET_TLS,
+	REGSET_IOPERM32,
 };
 
 /*
@@ -69,7 +72,7 @@ static inline bool invalid_selector(u16 value)
 
 #define FLAG_MASK		FLAG_MASK_32
 
-static long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
+static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
 {
 	BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);
 	regno >>= 2;
@@ -554,45 +557,138 @@ static int ptrace_set_debugreg(struct task_struct *child,
 	return 0;
 }
 
-#ifdef X86_BTS
+/*
+ * These access the current or another (stopped) task's io permission
+ * bitmap for debugging or core dump.
+ */
+static int ioperm_active(struct task_struct *target,
+			 const struct user_regset *regset)
+{
+	return target->thread.io_bitmap_max / regset->size;
+}
 
-static int ptrace_bts_get_size(struct task_struct *child)
+static int ioperm_get(struct task_struct *target,
+		      const struct user_regset *regset,
+		      unsigned int pos, unsigned int count,
+		      void *kbuf, void __user *ubuf)
 {
-	if (!child->thread.ds_area_msr)
+	if (!target->thread.io_bitmap_ptr)
 		return -ENXIO;
 
-	return ds_get_bts_index((void *)child->thread.ds_area_msr);
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   target->thread.io_bitmap_ptr,
+				   0, IO_BITMAP_BYTES);
+}
+
+#ifdef CONFIG_X86_PTRACE_BTS
+/*
+ * The configuration for a particular BTS hardware implementation.
+ */
+struct bts_configuration {
+	/* the size of a BTS record in bytes; at most BTS_MAX_RECORD_SIZE */
+	unsigned char  sizeof_bts;
+	/* the size of a field in the BTS record in bytes */
+	unsigned char  sizeof_field;
+	/* a bitmask to enable/disable BTS in DEBUGCTL MSR */
+	unsigned long debugctl_mask;
+};
+static struct bts_configuration bts_cfg;
+
+#define BTS_MAX_RECORD_SIZE (8 * 3)
+
+
+/*
+ * Branch Trace Store (BTS) uses the following format. Different
+ * architectures vary in the size of those fields.
+ * - source linear address
+ * - destination linear address
+ * - flags
+ *
+ * Later architectures use 64bit pointers throughout, whereas earlier
+ * architectures use 32bit pointers in 32bit mode.
+ *
+ * We compute the base address for the first 8 fields based on:
+ * - the field size stored in the DS configuration
+ * - the relative field position
+ *
+ * In order to store additional information in the BTS buffer, we use
+ * a special source address to indicate that the record requires
+ * special interpretation.
+ *
+ * Netburst indicated via a bit in the flags field whether the branch
+ * was predicted; this is ignored.
+ */
+
+enum bts_field {
+	bts_from = 0,
+	bts_to,
+	bts_flags,
+
+	bts_escape = (unsigned long)-1,
+	bts_qual = bts_to,
+	bts_jiffies = bts_flags
+};
+
+static inline unsigned long bts_get(const char *base, enum bts_field field)
+{
+	base += (bts_cfg.sizeof_field * field);
+	return *(unsigned long *)base;
+}
+
+static inline void bts_set(char *base, enum bts_field field, unsigned long val)
+{
+	base += (bts_cfg.sizeof_field * field);;
+	(*(unsigned long *)base) = val;
+}
+
+/*
+ * Translate a BTS record from the raw format into the bts_struct format
+ *
+ * out (out): bts_struct interpretation
+ * raw: raw BTS record
+ */
+static void ptrace_bts_translate_record(struct bts_struct *out, const void *raw)
+{
+	memset(out, 0, sizeof(*out));
+	if (bts_get(raw, bts_from) == bts_escape) {
+		out->qualifier       = bts_get(raw, bts_qual);
+		out->variant.jiffies = bts_get(raw, bts_jiffies);
+	} else {
+		out->qualifier = BTS_BRANCH;
+		out->variant.lbr.from_ip = bts_get(raw, bts_from);
+		out->variant.lbr.to_ip   = bts_get(raw, bts_to);
+	}
 }
 
-static int ptrace_bts_read_record(struct task_struct *child,
-				  long index,
+static int ptrace_bts_read_record(struct task_struct *child, size_t index,
 				  struct bts_struct __user *out)
 {
 	struct bts_struct ret;
-	int retval;
-	int bts_end;
-	int bts_index;
-
-	if (!child->thread.ds_area_msr)
-		return -ENXIO;
+	const void *bts_record;
+	size_t bts_index, bts_end;
+	int error;
 
-	if (index < 0)
-		return -EINVAL;
+	error = ds_get_bts_end(child, &bts_end);
+	if (error < 0)
+		return error;
 
-	bts_end = ds_get_bts_end((void *)child->thread.ds_area_msr);
 	if (bts_end <= index)
 		return -EINVAL;
 
+	error = ds_get_bts_index(child, &bts_index);
+	if (error < 0)
+		return error;
+
 	/* translate the ptrace bts index into the ds bts index */
-	bts_index = ds_get_bts_index((void *)child->thread.ds_area_msr);
-	bts_index -= (index + 1);
-	if (bts_index < 0)
-		bts_index += bts_end;
+	bts_index += bts_end - (index + 1);
+	if (bts_end <= bts_index)
+		bts_index -= bts_end;
+
+	error = ds_access_bts(child, bts_index, &bts_record);
+	if (error < 0)
+		return error;
 
-	retval = ds_read_bts((void *)child->thread.ds_area_msr,
-			     bts_index, &ret);
-	if (retval < 0)
-		return retval;
+	ptrace_bts_translate_record(&ret, bts_record);
 
 	if (copy_to_user(out, &ret, sizeof(ret)))
 		return -EFAULT;
@@ -600,101 +696,106 @@ static int ptrace_bts_read_record(struct task_struct *child,
 	return sizeof(ret);
 }
 
-static int ptrace_bts_clear(struct task_struct *child)
-{
-	if (!child->thread.ds_area_msr)
-		return -ENXIO;
-
-	return ds_clear((void *)child->thread.ds_area_msr);
-}
-
 static int ptrace_bts_drain(struct task_struct *child,
 			    long size,
 			    struct bts_struct __user *out)
 {
-	int end, i;
-	void *ds = (void *)child->thread.ds_area_msr;
-
-	if (!ds)
-		return -ENXIO;
+	struct bts_struct ret;
+	const unsigned char *raw;
+	size_t end, i;
+	int error;
 
-	end = ds_get_bts_index(ds);
-	if (end <= 0)
-		return end;
+	error = ds_get_bts_index(child, &end);
+	if (error < 0)
+		return error;
 
 	if (size < (end * sizeof(struct bts_struct)))
 		return -EIO;
 
-	for (i = 0; i < end; i++, out++) {
-		struct bts_struct ret;
-		int retval;
+	error = ds_access_bts(child, 0, (const void **)&raw);
+	if (error < 0)
+		return error;
 
-		retval = ds_read_bts(ds, i, &ret);
-		if (retval < 0)
-			return retval;
+	for (i = 0; i < end; i++, out++, raw += bts_cfg.sizeof_bts) {
+		ptrace_bts_translate_record(&ret, raw);
 
 		if (copy_to_user(out, &ret, sizeof(ret)))
 			return -EFAULT;
 	}
 
-	ds_clear(ds);
+	error = ds_clear_bts(child);
+	if (error < 0)
+		return error;
 
 	return end;
 }
 
+static void ptrace_bts_ovfl(struct task_struct *child)
+{
+	send_sig(child->thread.bts_ovfl_signal, child, 0);
+}
+
 static int ptrace_bts_config(struct task_struct *child,
 			     long cfg_size,
 			     const struct ptrace_bts_config __user *ucfg)
 {
 	struct ptrace_bts_config cfg;
-	int bts_size, ret = 0;
-	void *ds;
+	int error = 0;
 
+	error = -EOPNOTSUPP;
+	if (!bts_cfg.sizeof_bts)
+		goto errout;
+
+	error = -EIO;
 	if (cfg_size < sizeof(cfg))
-		return -EIO;
+		goto errout;
 
+	error = -EFAULT;
 	if (copy_from_user(&cfg, ucfg, sizeof(cfg)))
-		return -EFAULT;
+		goto errout;
 
-	if ((int)cfg.size < 0)
-		return -EINVAL;
+	error = -EINVAL;
+	if ((cfg.flags & PTRACE_BTS_O_SIGNAL) &&
+	    !(cfg.flags & PTRACE_BTS_O_ALLOC))
+		goto errout;
 
-	bts_size = 0;
-	ds = (void *)child->thread.ds_area_msr;
-	if (ds) {
-		bts_size = ds_get_bts_size(ds);
-		if (bts_size < 0)
-			return bts_size;
-	}
-	cfg.size = PAGE_ALIGN(cfg.size);
+	if (cfg.flags & PTRACE_BTS_O_ALLOC) {
+		ds_ovfl_callback_t ovfl = NULL;
+		unsigned int sig = 0;
+
+		/* we ignore the error in case we were not tracing child */
+		(void)ds_release_bts(child);
+
+		if (cfg.flags & PTRACE_BTS_O_SIGNAL) {
+			if (!cfg.signal)
+				goto errout;
+
+			sig  = cfg.signal;
+			ovfl = ptrace_bts_ovfl;
+		}
 
-	if (bts_size != cfg.size) {
-		ret = ptrace_bts_realloc(child, cfg.size,
-					 cfg.flags & PTRACE_BTS_O_CUT_SIZE);
-		if (ret < 0)
+		error = ds_request_bts(child, /* base = */ NULL, cfg.size, ovfl);
+		if (error < 0)
 			goto errout;
 
-		ds = (void *)child->thread.ds_area_msr;
+		child->thread.bts_ovfl_signal = sig;
 	}
 
-	if (cfg.flags & PTRACE_BTS_O_SIGNAL)
-		ret = ds_set_overflow(ds, DS_O_SIGNAL);
-	else
-		ret = ds_set_overflow(ds, DS_O_WRAP);
-	if (ret < 0)
+	error = -EINVAL;
+	if (!child->thread.ds_ctx && cfg.flags)
 		goto errout;
 
 	if (cfg.flags & PTRACE_BTS_O_TRACE)
-		child->thread.debugctlmsr |= ds_debugctl_mask();
+		child->thread.debugctlmsr |= bts_cfg.debugctl_mask;
 	else
-		child->thread.debugctlmsr &= ~ds_debugctl_mask();
+		child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask;
 
 	if (cfg.flags & PTRACE_BTS_O_SCHED)
 		set_tsk_thread_flag(child, TIF_BTS_TRACE_TS);
 	else
 		clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS);
 
-	ret = sizeof(cfg);
+	error = sizeof(cfg);
 
 out:
 	if (child->thread.debugctlmsr)
@@ -702,10 +803,10 @@ out:
 	else
 		clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
 
-	return ret;
+	return error;
 
 errout:
-	child->thread.debugctlmsr &= ~ds_debugctl_mask();
+	child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask;
 	clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS);
 	goto out;
 }
@@ -714,29 +815,40 @@ static int ptrace_bts_status(struct task_struct *child,
 			     long cfg_size,
 			     struct ptrace_bts_config __user *ucfg)
 {
-	void *ds = (void *)child->thread.ds_area_msr;
 	struct ptrace_bts_config cfg;
+	size_t end;
+	const void *base, *max;
+	int error;
 
 	if (cfg_size < sizeof(cfg))
 		return -EIO;
 
-	memset(&cfg, 0, sizeof(cfg));
+	error = ds_get_bts_end(child, &end);
+	if (error < 0)
+		return error;
 
-	if (ds) {
-		cfg.size = ds_get_bts_size(ds);
+	error = ds_access_bts(child, /* index = */ 0, &base);
+	if (error < 0)
+		return error;
 
-		if (ds_get_overflow(ds) == DS_O_SIGNAL)
-			cfg.flags |= PTRACE_BTS_O_SIGNAL;
+	error = ds_access_bts(child, /* index = */ end, &max);
+	if (error < 0)
+		return error;
 
-		if (test_tsk_thread_flag(child, TIF_DEBUGCTLMSR) &&
-		    child->thread.debugctlmsr & ds_debugctl_mask())
-			cfg.flags |= PTRACE_BTS_O_TRACE;
+	memset(&cfg, 0, sizeof(cfg));
+	cfg.size = (max - base);
+	cfg.signal = child->thread.bts_ovfl_signal;
+	cfg.bts_size = sizeof(struct bts_struct);
 
-		if (test_tsk_thread_flag(child, TIF_BTS_TRACE_TS))
-			cfg.flags |= PTRACE_BTS_O_SCHED;
-	}
+	if (cfg.signal)
+		cfg.flags |= PTRACE_BTS_O_SIGNAL;
 
-	cfg.bts_size = sizeof(struct bts_struct);
+	if (test_tsk_thread_flag(child, TIF_DEBUGCTLMSR) &&
+	    child->thread.debugctlmsr & bts_cfg.debugctl_mask)
+		cfg.flags |= PTRACE_BTS_O_TRACE;
+
+	if (test_tsk_thread_flag(child, TIF_BTS_TRACE_TS))
+		cfg.flags |= PTRACE_BTS_O_SCHED;
 
 	if (copy_to_user(ucfg, &cfg, sizeof(cfg)))
 		return -EFAULT;
@@ -744,89 +856,38 @@ static int ptrace_bts_status(struct task_struct *child,
 	return sizeof(cfg);
 }
 
-
 static int ptrace_bts_write_record(struct task_struct *child,
 				   const struct bts_struct *in)
 {
-	int retval;
+	unsigned char bts_record[BTS_MAX_RECORD_SIZE];
 
-	if (!child->thread.ds_area_msr)
-		return -ENXIO;
+	BUG_ON(BTS_MAX_RECORD_SIZE < bts_cfg.sizeof_bts);
 
-	retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
-	if (retval)
-		return retval;
+	memset(bts_record, 0, bts_cfg.sizeof_bts);
+	switch (in->qualifier) {
+	case BTS_INVALID:
+		break;
 
-	return sizeof(*in);
-}
+	case BTS_BRANCH:
+		bts_set(bts_record, bts_from, in->variant.lbr.from_ip);
+		bts_set(bts_record, bts_to,   in->variant.lbr.to_ip);
+		break;
 
-static int ptrace_bts_realloc(struct task_struct *child,
-			      int size, int reduce_size)
-{
-	unsigned long rlim, vm;
-	int ret, old_size;
+	case BTS_TASK_ARRIVES:
+	case BTS_TASK_DEPARTS:
+		bts_set(bts_record, bts_from,    bts_escape);
+		bts_set(bts_record, bts_qual,    in->qualifier);
+		bts_set(bts_record, bts_jiffies, in->variant.jiffies);
+		break;
 
-	if (size < 0)
+	default:
 		return -EINVAL;
-
-	old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
-	if (old_size < 0)
-		return old_size;
-
-	ret = ds_free((void **)&child->thread.ds_area_msr);
-	if (ret < 0)
-		goto out;
-
-	size >>= PAGE_SHIFT;
-	old_size >>= PAGE_SHIFT;
-
-	current->mm->total_vm  -= old_size;
-	current->mm->locked_vm -= old_size;
-
-	if (size == 0)
-		goto out;
-
-	rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
-	vm = current->mm->total_vm  + size;
-	if (rlim < vm) {
-		ret = -ENOMEM;
-
-		if (!reduce_size)
-			goto out;
-
-		size = rlim - current->mm->total_vm;
-		if (size <= 0)
-			goto out;
-	}
-
-	rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
-	vm = current->mm->locked_vm  + size;
-	if (rlim < vm) {
-		ret = -ENOMEM;
-
-		if (!reduce_size)
-			goto out;
-
-		size = rlim - current->mm->locked_vm;
-		if (size <= 0)
-			goto out;
 	}
 
-	ret = ds_allocate((void **)&child->thread.ds_area_msr,
-			  size << PAGE_SHIFT);
-	if (ret < 0)
-		goto out;
-
-	current->mm->total_vm  += size;
-	current->mm->locked_vm += size;
-
-out:
-	if (child->thread.ds_area_msr)
-		set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-	else
-		clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-
-	return ret;
+	/* The writing task will be the switched-to task on a context
+	 * switch. It needs to write into the switched-from task's BTS
+	 * buffer. */
+	return ds_unchecked_write_bts(child, bts_record, bts_cfg.sizeof_bts);
 }
 
 void ptrace_bts_take_timestamp(struct task_struct *tsk,
@@ -839,7 +900,66 @@ void ptrace_bts_take_timestamp(struct task_struct *tsk,
 
 	ptrace_bts_write_record(tsk, &rec);
 }
-#endif /* X86_BTS */
+
+static const struct bts_configuration bts_cfg_netburst = {
+	.sizeof_bts    = sizeof(long) * 3,
+	.sizeof_field  = sizeof(long),
+	.debugctl_mask = (1<<2)|(1<<3)|(1<<5)
+};
+
+static const struct bts_configuration bts_cfg_pentium_m = {
+	.sizeof_bts    = sizeof(long) * 3,
+	.sizeof_field  = sizeof(long),
+	.debugctl_mask = (1<<6)|(1<<7)
+};
+
+static const struct bts_configuration bts_cfg_core2 = {
+	.sizeof_bts    = 8 * 3,
+	.sizeof_field  = 8,
+	.debugctl_mask = (1<<6)|(1<<7)|(1<<9)
+};
+
+static inline void bts_configure(const struct bts_configuration *cfg)
+{
+	bts_cfg = *cfg;
+}
+
+void __cpuinit ptrace_bts_init_intel(struct cpuinfo_x86 *c)
+{
+	switch (c->x86) {
+	case 0x6:
+		switch (c->x86_model) {
+		case 0xD:
+		case 0xE: /* Pentium M */
+			bts_configure(&bts_cfg_pentium_m);
+			break;
+		case 0xF: /* Core2 */
+        case 0x1C: /* Atom */
+			bts_configure(&bts_cfg_core2);
+			break;
+		default:
+			/* sorry, don't know about them */
+			break;
+		}
+		break;
+	case 0xF:
+		switch (c->x86_model) {
+		case 0x0:
+		case 0x1:
+		case 0x2: /* Netburst */
+			bts_configure(&bts_cfg_netburst);
+			break;
+		default:
+			/* sorry, don't know about them */
+			break;
+		}
+		break;
+	default:
+		/* sorry, don't know about them */
+		break;
+	}
+}
+#endif /* CONFIG_X86_PTRACE_BTS */
 
 /*
  * Called by kernel/ptrace.c when detaching..
@@ -852,15 +972,15 @@ void ptrace_disable(struct task_struct *child)
 #ifdef TIF_SYSCALL_EMU
 	clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
 #endif
-	if (child->thread.ds_area_msr) {
-#ifdef X86_BTS
-		ptrace_bts_realloc(child, 0, 0);
-#endif
-		child->thread.debugctlmsr &= ~ds_debugctl_mask();
-		if (!child->thread.debugctlmsr)
-			clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
-		clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS);
-	}
+#ifdef CONFIG_X86_PTRACE_BTS
+	(void)ds_release_bts(child);
+
+	child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask;
+	if (!child->thread.debugctlmsr)
+		clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
+
+	clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS);
+#endif /* CONFIG_X86_PTRACE_BTS */
 }
 
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
@@ -980,7 +1100,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	/*
 	 * These bits need more cooking - not enabled yet:
 	 */
-#ifdef X86_BTS
+#ifdef CONFIG_X86_PTRACE_BTS
 	case PTRACE_BTS_CONFIG:
 		ret = ptrace_bts_config
 			(child, data, (struct ptrace_bts_config __user *)addr);
@@ -992,7 +1112,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 	case PTRACE_BTS_SIZE:
-		ret = ptrace_bts_get_size(child);
+		ret = ds_get_bts_index(child, /* pos = */ NULL);
 		break;
 
 	case PTRACE_BTS_GET:
@@ -1001,14 +1121,14 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 	case PTRACE_BTS_CLEAR:
-		ret = ptrace_bts_clear(child);
+		ret = ds_clear_bts(child);
 		break;
 
 	case PTRACE_BTS_DRAIN:
 		ret = ptrace_bts_drain
 			(child, data, (struct bts_struct __user *) addr);
 		break;
-#endif
+#endif /* CONFIG_X86_PTRACE_BTS */
 
 	default:
 		ret = ptrace_request(child, request, addr, data);
@@ -1290,6 +1410,12 @@ static const struct user_regset x86_64_regsets[] = {
 		.size = sizeof(long), .align = sizeof(long),
 		.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
 	},
+	[REGSET_IOPERM64] = {
+		.core_note_type = NT_386_IOPERM,
+		.n = IO_BITMAP_LONGS,
+		.size = sizeof(long), .align = sizeof(long),
+		.active = ioperm_active, .get = ioperm_get
+	},
 };
 
 static const struct user_regset_view user_x86_64_view = {
@@ -1336,6 +1462,12 @@ static const struct user_regset x86_32_regsets[] = {
 		.active = regset_tls_active,
 		.get = regset_tls_get, .set = regset_tls_set
 	},
+	[REGSET_IOPERM32] = {
+		.core_note_type = NT_386_IOPERM,
+		.n = IO_BITMAP_BYTES / sizeof(u32),
+		.size = sizeof(u32), .align = sizeof(u32),
+		.active = ioperm_active, .get = ioperm_get
+	},
 };
 
 static const struct user_regset_view user_x86_32_view = {
@@ -1357,7 +1489,8 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 #endif
 }
 
-void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
+void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
+					 int error_code, int si_code)
 {
 	struct siginfo info;
 
@@ -1366,7 +1499,7 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 
 	memset(&info, 0, sizeof(info));
 	info.si_signo = SIGTRAP;
-	info.si_code = TRAP_BRKPT;
+	info.si_code = si_code;
 
 	/* User-mode ip? */
 	info.si_addr = user_mode_vm(regs) ? (void __user *) regs->ip : NULL;
@@ -1375,30 +1508,6 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 	force_sig_info(SIGTRAP, &info, tsk);
 }
 
-static void syscall_trace(struct pt_regs *regs)
-{
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-
-#if 0
-	printk("trace %s ip %lx sp %lx ax %d origrax %d caller %lx tiflags %x ptrace %x\n",
-	       current->comm,
-	       regs->ip, regs->sp, regs->ax, regs->orig_ax, __builtin_return_address(0),
-	       current_thread_info()->flags, current->ptrace);
-#endif
-
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
 
 #ifdef CONFIG_X86_32
 # define IS_IA32	1
@@ -1432,8 +1541,9 @@ asmregparm long syscall_trace_enter(struct pt_regs *regs)
 	if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
 		ret = -1L;
 
-	if (ret || test_thread_flag(TIF_SYSCALL_TRACE))
-		syscall_trace(regs);
+	if ((ret || test_thread_flag(TIF_SYSCALL_TRACE)) &&
+	    tracehook_report_syscall_entry(regs))
+		ret = -1L;
 
 	if (unlikely(current->audit_context)) {
 		if (IS_IA32)
@@ -1459,7 +1569,7 @@ asmregparm void syscall_trace_leave(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		syscall_trace(regs);
+		tracehook_report_syscall_exit(regs, 0);
 
 	/*
 	 * If TIF_SYSCALL_EMU is set, we only get here because of
@@ -1475,6 +1585,6 @@ asmregparm void syscall_trace_leave(struct pt_regs *regs)
 	 * system call instruction.
 	 */
 	if (test_thread_flag(TIF_SINGLESTEP) &&
-	    (current->ptrace & PT_PTRACED))
-		send_sigtrap(current, regs, 0);
+	    tracehook_consider_fatal_signal(current, SIGTRAP, SIG_DFL))
+		send_sigtrap(current, regs, 0, TRAP_BRKPT);
 }
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 05fbe9a..4f9c55f 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -97,6 +97,18 @@ static unsigned pvclock_get_time_values(struct pvclock_shadow_time *dst,
 	return dst->version;
 }
 
+unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src)
+{
+	u64 pv_tsc_khz = 1000000ULL << 32;
+
+	do_div(pv_tsc_khz, src->tsc_to_system_mul);
+	if (src->tsc_shift < 0)
+		pv_tsc_khz <<= -src->tsc_shift;
+	else
+		pv_tsc_khz >>= src->tsc_shift;
+	return pv_tsc_khz;
+}
+
 cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
 {
 	struct pvclock_shadow_time shadow;
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index d138588..67465ed 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -35,9 +35,6 @@ static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
 	if (!(word & (1 << 13))) {
 		dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
 			"disabling irq balancing and affinity\n");
-#ifdef CONFIG_IRQBALANCE
-		irqbalance_disable("");
-#endif
 		noirqdebug_setup("");
 #ifdef CONFIG_PROC_FS
 		no_irq_affinity = 1;
@@ -354,9 +351,27 @@ static void ati_force_hpet_resume(void)
 	printk(KERN_DEBUG "Force enabled HPET at resume\n");
 }
 
+static u32 ati_ixp4x0_rev(struct pci_dev *dev)
+{
+	u32 d;
+	u8  b;
+
+	pci_read_config_byte(dev, 0xac, &b);
+	b &= ~(1<<5);
+	pci_write_config_byte(dev, 0xac, b);
+	pci_read_config_dword(dev, 0x70, &d);
+	d |= 1<<8;
+	pci_write_config_dword(dev, 0x70, d);
+	pci_read_config_dword(dev, 0x8, &d);
+	d &= 0xff;
+	dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d);
+	return d;
+}
+
 static void ati_force_enable_hpet(struct pci_dev *dev)
 {
-	u32 uninitialized_var(val);
+	u32 d, val;
+	u8  b;
 
 	if (hpet_address || force_hpet_address)
 		return;
@@ -366,14 +381,33 @@ static void ati_force_enable_hpet(struct pci_dev *dev)
 		return;
 	}
 
+	d = ati_ixp4x0_rev(dev);
+	if (d  < 0x82)
+		return;
+
+	/* base address */
 	pci_write_config_dword(dev, 0x14, 0xfed00000);
 	pci_read_config_dword(dev, 0x14, &val);
+
+	/* enable interrupt */
+	outb(0x72, 0xcd6); b = inb(0xcd7);
+	b |= 0x1;
+	outb(0x72, 0xcd6); outb(b, 0xcd7);
+	outb(0x72, 0xcd6); b = inb(0xcd7);
+	if (!(b & 0x1))
+		return;
+	pci_read_config_dword(dev, 0x64, &d);
+	d |= (1<<10);
+	pci_write_config_dword(dev, 0x64, d);
+	pci_read_config_dword(dev, 0x64, &d);
+	if (!(d & (1<<10)))
+		return;
+
 	force_hpet_address = val;
 	force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
 	dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
 		   force_hpet_address);
 	cached_dev = dev;
-	return;
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
 			 ati_force_enable_hpet);
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 724adfc..f4c93f1 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -29,7 +29,11 @@ EXPORT_SYMBOL(pm_power_off);
 
 static const struct desc_ptr no_idt = {};
 static int reboot_mode;
-enum reboot_type reboot_type = BOOT_KBD;
+/*
+ * Keyboard reset and triple fault may result in INIT, not RESET, which
+ * doesn't work when we're in vmx root mode.  Try ACPI first.
+ */
+enum reboot_type reboot_type = BOOT_ACPI;
 int reboot_force;
 
 #if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 05191bb..dd6f2b7 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -52,7 +52,7 @@ int mach_set_rtc_mmss(unsigned long nowtime)
 
 	cmos_minutes = CMOS_READ(RTC_MINUTES);
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
+		cmos_minutes = bcd2bin(cmos_minutes);
 
 	/*
 	 * since we're only adjusting minutes and seconds,
@@ -69,8 +69,8 @@ int mach_set_rtc_mmss(unsigned long nowtime)
 
 	if (abs(real_minutes - cmos_minutes) < 30) {
 		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
 		}
 		CMOS_WRITE(real_seconds,RTC_SECONDS);
 		CMOS_WRITE(real_minutes,RTC_MINUTES);
@@ -124,16 +124,16 @@ unsigned long mach_get_cmos_time(void)
 	WARN_ON_ONCE(RTC_ALWAYS_BCD && (status & RTC_DM_BINARY));
 
 	if (RTC_ALWAYS_BCD || !(status & RTC_DM_BINARY)) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 	}
 
 	if (century) {
-		BCD_TO_BIN(century);
+		century = bcd2bin(century);
 		year += century * 100;
 		printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
 	} else
@@ -223,11 +223,25 @@ static struct platform_device rtc_device = {
 static __init int add_rtc_cmos(void)
 {
 #ifdef CONFIG_PNP
-	if (!pnp_platform_devices)
-		platform_device_register(&rtc_device);
-#else
+	static const char *ids[] __initconst =
+	    { "PNP0b00", "PNP0b01", "PNP0b02", };
+	struct pnp_dev *dev;
+	struct pnp_id *id;
+	int i;
+
+	pnp_for_each_dev(dev) {
+		for (id = dev->id; id; id = id->next) {
+			for (i = 0; i < ARRAY_SIZE(ids); i++) {
+				if (compare_pnp_id(id, ids[i]) != 0)
+					return 0;
+			}
+		}
+	}
+#endif
+
 	platform_device_register(&rtc_device);
-#endif /* CONFIG_PNP */
+	dev_info(&rtc_device.dev,
+		 "registered platform RTC device (no PNP device found)\n");
 	return 0;
 }
 device_initcall(add_rtc_cmos);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 9838f25..0fa6790 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -223,6 +223,9 @@ unsigned long saved_video_mode;
 #define RAMDISK_LOAD_FLAG		0x4000
 
 static char __initdata command_line[COMMAND_LINE_SIZE];
+#ifdef CONFIG_CMDLINE_BOOL
+static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
+#endif
 
 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
 struct edd edd;
@@ -299,7 +302,7 @@ static void __init relocate_initrd(void)
 		if (clen > MAX_MAP_CHUNK-slop)
 			clen = MAX_MAP_CHUNK-slop;
 		mapaddr = ramdisk_image & PAGE_MASK;
-		p = early_ioremap(mapaddr, clen+slop);
+		p = early_memremap(mapaddr, clen+slop);
 		memcpy(q, p+slop, clen);
 		early_iounmap(p, clen+slop);
 		q += clen;
@@ -376,7 +379,7 @@ static void __init parse_setup_data(void)
 		return;
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
-		data = early_ioremap(pa_data, PAGE_SIZE);
+		data = early_memremap(pa_data, PAGE_SIZE);
 		switch (data->type) {
 		case SETUP_E820_EXT:
 			parse_e820_ext(data, pa_data);
@@ -399,7 +402,7 @@ static void __init e820_reserve_setup_data(void)
 		return;
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
-		data = early_ioremap(pa_data, sizeof(*data));
+		data = early_memremap(pa_data, sizeof(*data));
 		e820_update_range(pa_data, sizeof(*data)+data->len,
 			 E820_RAM, E820_RESERVED_KERN);
 		found = 1;
@@ -425,7 +428,7 @@ static void __init reserve_early_setup_data(void)
 		return;
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
-		data = early_ioremap(pa_data, sizeof(*data));
+		data = early_memremap(pa_data, sizeof(*data));
 		sprintf(buf, "setup data %x", data->type);
 		reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
 		pa_data = data->next;
@@ -558,7 +561,13 @@ static void __init reserve_standard_io_resources(void)
 
 }
 
-#ifdef CONFIG_PROC_VMCORE
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+
+#ifdef CONFIG_CRASH_DUMP
 /* elfcorehdr= specifies the location of elf core header
  * stored by the crashed kernel. This option will be passed
  * by kexec loader to the capture kernel.
@@ -579,6 +588,190 @@ static struct x86_quirks default_x86_quirks __initdata;
 struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
 
 /*
+ * Some BIOSes seem to corrupt the low 64k of memory during events
+ * like suspend/resume and unplugging an HDMI cable.  Reserve all
+ * remaining free memory in that area and fill it with a distinct
+ * pattern.
+ */
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+#define MAX_SCAN_AREAS	8
+
+static int __read_mostly memory_corruption_check = -1;
+
+static unsigned __read_mostly corruption_check_size = 64*1024;
+static unsigned __read_mostly corruption_check_period = 60; /* seconds */
+
+static struct e820entry scan_areas[MAX_SCAN_AREAS];
+static int num_scan_areas;
+
+
+static int set_corruption_check(char *arg)
+{
+	char *end;
+
+	memory_corruption_check = simple_strtol(arg, &end, 10);
+
+	return (*end == 0) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check", set_corruption_check);
+
+static int set_corruption_check_period(char *arg)
+{
+	char *end;
+
+	corruption_check_period = simple_strtoul(arg, &end, 10);
+
+	return (*end == 0) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check_period", set_corruption_check_period);
+
+static int set_corruption_check_size(char *arg)
+{
+	char *end;
+	unsigned size;
+
+	size = memparse(arg, &end);
+
+	if (*end == '\0')
+		corruption_check_size = size;
+
+	return (size == corruption_check_size) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check_size", set_corruption_check_size);
+
+
+static void __init setup_bios_corruption_check(void)
+{
+	u64 addr = PAGE_SIZE;	/* assume first page is reserved anyway */
+
+	if (memory_corruption_check == -1) {
+		memory_corruption_check =
+#ifdef CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
+			1
+#else
+			0
+#endif
+			;
+	}
+
+	if (corruption_check_size == 0)
+		memory_corruption_check = 0;
+
+	if (!memory_corruption_check)
+		return;
+
+	corruption_check_size = round_up(corruption_check_size, PAGE_SIZE);
+
+	while(addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) {
+		u64 size;
+		addr = find_e820_area_size(addr, &size, PAGE_SIZE);
+
+		if (addr == 0)
+			break;
+
+		if ((addr + size) > corruption_check_size)
+			size = corruption_check_size - addr;
+
+		if (size == 0)
+			break;
+
+		e820_update_range(addr, size, E820_RAM, E820_RESERVED);
+		scan_areas[num_scan_areas].addr = addr;
+		scan_areas[num_scan_areas].size = size;
+		num_scan_areas++;
+
+		/* Assume we've already mapped this early memory */
+		memset(__va(addr), 0, size);
+
+		addr += size;
+	}
+
+	printk(KERN_INFO "Scanning %d areas for low memory corruption\n",
+	       num_scan_areas);
+	update_e820();
+}
+
+static struct timer_list periodic_check_timer;
+
+void check_for_bios_corruption(void)
+{
+	int i;
+	int corruption = 0;
+
+	if (!memory_corruption_check)
+		return;
+
+	for(i = 0; i < num_scan_areas; i++) {
+		unsigned long *addr = __va(scan_areas[i].addr);
+		unsigned long size = scan_areas[i].size;
+
+		for(; size; addr++, size -= sizeof(unsigned long)) {
+			if (!*addr)
+				continue;
+			printk(KERN_ERR "Corrupted low memory at %p (%lx phys) = %08lx\n",
+			       addr, __pa(addr), *addr);
+			corruption = 1;
+			*addr = 0;
+		}
+	}
+
+	WARN(corruption, KERN_ERR "Memory corruption detected in low memory\n");
+}
+
+static void periodic_check_for_corruption(unsigned long data)
+{
+	check_for_bios_corruption();
+	mod_timer(&periodic_check_timer, round_jiffies(jiffies + corruption_check_period*HZ));
+}
+
+void start_periodic_check_for_corruption(void)
+{
+	if (!memory_corruption_check || corruption_check_period == 0)
+		return;
+
+	printk(KERN_INFO "Scanning for low memory corruption every %d seconds\n",
+	       corruption_check_period);
+
+	init_timer(&periodic_check_timer);
+	periodic_check_timer.function = &periodic_check_for_corruption;
+	periodic_check_for_corruption(0);
+}
+#endif
+
+static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
+{
+	printk(KERN_NOTICE
+		"%s detected: BIOS may corrupt low RAM, working it around.\n",
+		d->ident);
+
+	e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+
+	return 0;
+}
+
+/* List of systems that have known low memory corruption BIOS problems */
+static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
+#ifdef CONFIG_X86_RESERVE_LOW_64K
+	{
+		.callback = dmi_low_memory_corruption,
+		.ident = "AMI BIOS",
+		.matches = {
+			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+		},
+	},
+	{
+		.callback = dmi_low_memory_corruption,
+		.ident = "Phoenix BIOS",
+		.matches = {
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
+#endif
+	{}
+};
+
+/*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
  * for initialization.  Note, the efi init code path is determined by the
@@ -665,6 +858,19 @@ void __init setup_arch(char **cmdline_p)
 	bss_resource.start = virt_to_phys(&__bss_start);
 	bss_resource.end = virt_to_phys(&__bss_stop)-1;
 
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+	if (builtin_cmdline[0]) {
+		/* append boot loader cmdline to builtin */
+		strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+		strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+	}
+#endif
+#endif
+
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
@@ -699,6 +905,10 @@ void __init setup_arch(char **cmdline_p)
 
 	finish_e820_parsing();
 
+	dmi_scan_machine();
+
+	dmi_check_system(bad_bios_dmi_table);
+
 #ifdef CONFIG_X86_32
 	probe_roms();
 #endif
@@ -742,6 +952,8 @@ void __init setup_arch(char **cmdline_p)
 #else
 	num_physpages = max_pfn;
 
+ 	if (cpu_has_x2apic)
+ 		check_x2apic();
 
 	/* How many end-of-memory variables you have, grandma! */
 	/* need this before calling reserve_initrd */
@@ -753,6 +965,10 @@ void __init setup_arch(char **cmdline_p)
 	high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
 #endif
 
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+	setup_bios_corruption_check();
+#endif
+
 	/* max_pfn_mapped is updated here */
 	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
 	max_pfn_mapped = max_low_pfn_mapped;
@@ -781,8 +997,6 @@ void __init setup_arch(char **cmdline_p)
 	vsmp_init();
 #endif
 
-	dmi_scan_machine();
-
 	io_delay_init();
 
 	/*
@@ -790,6 +1004,8 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	acpi_boot_table_init();
 
+	early_acpi_boot_init();
+
 #ifdef CONFIG_ACPI_NUMA
 	/*
 	 * Parse SRAT to discover nodes.
@@ -857,6 +1073,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	prefill_possible_map();
+
 #ifdef CONFIG_X86_64
 	init_cpu_to_node();
 #endif
@@ -864,6 +1081,9 @@ void __init setup_arch(char **cmdline_p)
 	init_apic_mappings();
 	ioapic_init_mappings();
 
+	/* need to wait for io_apic is mapped */
+	nr_irqs = probe_nr_irqs();
+
 	kvm_guest_init();
 
 	e820_reserve_resources();
@@ -885,3 +1105,5 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #endif
 }
+
+
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 76e305e..ae0c0d3 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -140,35 +140,47 @@ static void __init setup_cpu_pda_map(void)
  */
 void __init setup_per_cpu_areas(void)
 {
-	ssize_t size = PERCPU_ENOUGH_ROOM;
+	ssize_t size, old_size;
 	char *ptr;
 	int cpu;
+	unsigned long align = 1;
 
 	/* Setup cpu_pda map */
 	setup_cpu_pda_map();
 
 	/* Copy section for each CPU (we discard the original) */
-	size = PERCPU_ENOUGH_ROOM;
+	old_size = PERCPU_ENOUGH_ROOM;
+	align = max_t(unsigned long, PAGE_SIZE, align);
+	size = roundup(old_size, align);
 	printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
 			  size);
 
 	for_each_possible_cpu(cpu) {
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-		ptr = alloc_bootmem_pages(size);
+		ptr = __alloc_bootmem(size, align,
+				 __pa(MAX_DMA_ADDRESS));
 #else
 		int node = early_cpu_to_node(cpu);
 		if (!node_online(node) || !NODE_DATA(node)) {
-			ptr = alloc_bootmem_pages(size);
+			ptr = __alloc_bootmem(size, align,
+					 __pa(MAX_DMA_ADDRESS));
 			printk(KERN_INFO
 			       "cpu %d has no node %d or node-local memory\n",
 				cpu, node);
+			if (ptr)
+				printk(KERN_DEBUG "per cpu data for cpu%d at %016lx\n",
+					 cpu, __pa(ptr));
+		}
+		else {
+			ptr = __alloc_bootmem_node(NODE_DATA(node), size, align,
+							__pa(MAX_DMA_ADDRESS));
+			if (ptr)
+				printk(KERN_DEBUG "per cpu data for cpu%d on node%d at %016lx\n",
+					 cpu, node, __pa(ptr));
 		}
-		else
-			ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
 #endif
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-
 	}
 
 	printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d, nr_node_ids %d\n",
@@ -206,7 +218,7 @@ static void __init setup_node_to_cpumask_map(void)
 	/* allocate the map */
 	map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
 
-	pr_debug(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
+	pr_debug("Node to cpumask map at %p for %d nodes\n",
 		 map, nr_node_ids);
 
 	/* node_to_cpumask() will now work */
diff --git a/arch/x86/kernel/sigframe.h b/arch/x86/kernel/sigframe.h
index 72bbb51..cc673aa 100644
--- a/arch/x86/kernel/sigframe.h
+++ b/arch/x86/kernel/sigframe.h
@@ -3,9 +3,18 @@ struct sigframe {
 	char __user *pretcode;
 	int sig;
 	struct sigcontext sc;
-	struct _fpstate fpstate;
+	/*
+	 * fpstate is unused. fpstate is moved/allocated after
+	 * retcode[] below. This movement allows to have the FP state and the
+	 * future state extensions (xsave) stay together.
+	 * And at the same time retaining the unused fpstate, prevents changing
+	 * the offset of extramask[] in the sigframe and thus prevent any
+	 * legacy application accessing/modifying it.
+	 */
+	struct _fpstate fpstate_unused;
 	unsigned long extramask[_NSIG_WORDS-1];
 	char retcode[8];
+	/* fp state follows here */
 };
 
 struct rt_sigframe {
@@ -15,13 +24,19 @@ struct rt_sigframe {
 	void __user *puc;
 	struct siginfo info;
 	struct ucontext uc;
-	struct _fpstate fpstate;
 	char retcode[8];
+	/* fp state follows here */
 };
 #else
 struct rt_sigframe {
 	char __user *pretcode;
 	struct ucontext uc;
 	struct siginfo info;
+	/* fp state follows here */
 };
+
+int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+		sigset_t *set, struct pt_regs *regs);
+int ia32_setup_frame(int sig, struct k_sigaction *ka,
+		sigset_t *set, struct pt_regs *regs);
 #endif
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index 6fb5bcd..d6dd057 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/wait.h>
+#include <linux/tracehook.h>
 #include <linux/elf.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
@@ -26,6 +27,8 @@
 #include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/vdso.h>
+#include <asm/syscall.h>
+#include <asm/syscalls.h>
 
 #include "sigframe.h"
 
@@ -110,6 +113,27 @@ asmlinkage int sys_sigaltstack(unsigned long bx)
 	return do_sigaltstack(uss, uoss, regs->sp);
 }
 
+#define COPY(x)			{		\
+	err |= __get_user(regs->x, &sc->x);	\
+}
+
+#define COPY_SEG(seg)		{			\
+		unsigned short tmp;			\
+		err |= __get_user(tmp, &sc->seg);	\
+		regs->seg = tmp;			\
+}
+
+#define COPY_SEG_STRICT(seg)	{			\
+		unsigned short tmp;			\
+		err |= __get_user(tmp, &sc->seg);	\
+		regs->seg = tmp | 3;			\
+}
+
+#define GET_SEG(seg)		{			\
+		unsigned short tmp;			\
+		err |= __get_user(tmp, &sc->seg);	\
+		loadsegment(seg, tmp);			\
+}
 
 /*
  * Do a signal return; undo the signal stack.
@@ -118,28 +142,13 @@ static int
 restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 		   unsigned long *pax)
 {
+	void __user *buf;
+	unsigned int tmpflags;
 	unsigned int err = 0;
 
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
-#define COPY(x)		err |= __get_user(regs->x, &sc->x)
-
-#define COPY_SEG(seg)							\
-	{ unsigned short tmp;						\
-	  err |= __get_user(tmp, &sc->seg);				\
-	  regs->seg = tmp; }
-
-#define COPY_SEG_STRICT(seg)						\
-	{ unsigned short tmp;						\
-	  err |= __get_user(tmp, &sc->seg);				\
-	  regs->seg = tmp|3; }
-
-#define GET_SEG(seg)							\
-	{ unsigned short tmp;						\
-	  err |= __get_user(tmp, &sc->seg);				\
-	  loadsegment(seg, tmp); }
-
 	GET_SEG(gs);
 	COPY_SEG(fs);
 	COPY_SEG(es);
@@ -149,38 +158,15 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 	COPY_SEG_STRICT(cs);
 	COPY_SEG_STRICT(ss);
 
-	{
-		unsigned int tmpflags;
-
-		err |= __get_user(tmpflags, &sc->flags);
-		regs->flags = (regs->flags & ~FIX_EFLAGS) |
-						(tmpflags & FIX_EFLAGS);
-		regs->orig_ax = -1;		/* disable syscall checks */
-	}
+	err |= __get_user(tmpflags, &sc->flags);
+	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+	regs->orig_ax = -1;		/* disable syscall checks */
 
-	{
-		struct _fpstate __user *buf;
-
-		err |= __get_user(buf, &sc->fpstate);
-		if (buf) {
-			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
-				goto badframe;
-			err |= restore_i387(buf);
-		} else {
-			struct task_struct *me = current;
-
-			if (used_math()) {
-				clear_fpu(me);
-				clear_used_math();
-			}
-		}
-	}
+	err |= __get_user(buf, &sc->fpstate);
+	err |= restore_i387_xstate(buf);
 
 	err |= __get_user(*pax, &sc->ax);
 	return err;
-
-badframe:
-	return 1;
 }
 
 asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
@@ -226,9 +212,8 @@ badframe:
 	return 0;
 }
 
-asmlinkage int sys_rt_sigreturn(unsigned long __unused)
+static long do_rt_sigreturn(struct pt_regs *regs)
 {
-	struct pt_regs *regs = (struct pt_regs *)&__unused;
 	struct rt_sigframe __user *frame;
 	unsigned long ax;
 	sigset_t set;
@@ -254,15 +239,22 @@ asmlinkage int sys_rt_sigreturn(unsigned long __unused)
 	return ax;
 
 badframe:
-	force_sig(SIGSEGV, current);
+	signal_fault(regs, frame, "rt_sigreturn");
 	return 0;
 }
 
+asmlinkage int sys_rt_sigreturn(unsigned long __unused)
+{
+	struct pt_regs *regs = (struct pt_regs *)&__unused;
+
+	return do_rt_sigreturn(regs);
+}
+
 /*
  * Set up a signal frame.
  */
 static int
-setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
+setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
 		 struct pt_regs *regs, unsigned long mask)
 {
 	int tmp, err = 0;
@@ -289,7 +281,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
 	err |= __put_user(regs->sp, &sc->sp_at_signal);
 	err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss);
 
-	tmp = save_i387(fpstate);
+	tmp = save_i387_xstate(fpstate);
 	if (tmp < 0)
 		err = 1;
 	else
@@ -306,7 +298,8 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
  * Determine which stack to use..
  */
 static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
+	     void **fpstate)
 {
 	unsigned long sp;
 
@@ -332,6 +325,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 			sp = (unsigned long) ka->sa.sa_restorer;
 	}
 
+	if (used_math()) {
+		sp = sp - sig_xstate_size;
+		*fpstate = (struct _fpstate *) sp;
+	}
+
 	sp -= frame_size;
 	/*
 	 * Align the stack pointer according to the i386 ABI,
@@ -343,38 +341,29 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 }
 
 static int
-setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
-	    struct pt_regs *regs)
+__setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
+	      struct pt_regs *regs)
 {
 	struct sigframe __user *frame;
 	void __user *restorer;
 	int err = 0;
-	int usig;
+	void __user *fpstate = NULL;
 
-	frame = get_sigframe(ka, regs, sizeof(*frame));
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
+		return -EFAULT;
 
-	usig = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
+	if (__put_user(sig, &frame->sig))
+		return -EFAULT;
 
-	err = __put_user(usig, &frame->sig);
-	if (err)
-		goto give_sigsegv;
-
-	err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]);
-	if (err)
-		goto give_sigsegv;
+	if (setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]))
+		return -EFAULT;
 
 	if (_NSIG_WORDS > 1) {
-		err = __copy_to_user(&frame->extramask, &set->sig[1],
-				      sizeof(frame->extramask));
-		if (err)
-			goto give_sigsegv;
+		if (__copy_to_user(&frame->extramask, &set->sig[1],
+				   sizeof(frame->extramask)))
+			return -EFAULT;
 	}
 
 	if (current->mm->context.vdso)
@@ -399,7 +388,7 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
 	err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
 
 	if (err)
-		goto give_sigsegv;
+		return -EFAULT;
 
 	/* Set up registers for signal handler */
 	regs->sp = (unsigned long)frame;
@@ -414,50 +403,43 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
 	regs->cs = __USER_CS;
 
 	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return -EFAULT;
 }
 
-static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			  sigset_t *set, struct pt_regs *regs)
+static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			    sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
 	void __user *restorer;
 	int err = 0;
-	int usig;
+	void __user *fpstate = NULL;
 
-	frame = get_sigframe(ka, regs, sizeof(*frame));
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
+		return -EFAULT;
 
-	usig = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= __put_user(usig, &frame->sig);
+	err |= __put_user(sig, &frame->sig);
 	err |= __put_user(&frame->info, &frame->pinfo);
 	err |= __put_user(&frame->uc, &frame->puc);
 	err |= copy_siginfo_to_user(&frame->info, info);
 	if (err)
-		goto give_sigsegv;
+		return -EFAULT;
 
 	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
+	if (cpu_has_xsave)
+		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+	else
+		err |= __put_user(0, &frame->uc.uc_flags);
 	err |= __put_user(0, &frame->uc.uc_link);
 	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->sp),
 			  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
 				regs, set->sig[0]);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
-		goto give_sigsegv;
+		return -EFAULT;
 
 	/* Set up to return from userspace.  */
 	restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn);
@@ -477,12 +459,12 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
 
 	if (err)
-		goto give_sigsegv;
+		return -EFAULT;
 
 	/* Set up registers for signal handler */
 	regs->sp = (unsigned long)frame;
 	regs->ip = (unsigned long)ka->sa.sa_handler;
-	regs->ax = (unsigned long)usig;
+	regs->ax = (unsigned long)sig;
 	regs->dx = (unsigned long)&frame->info;
 	regs->cx = (unsigned long)&frame->uc;
 
@@ -492,15 +474,48 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->cs = __USER_CS;
 
 	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return -EFAULT;
 }
 
 /*
  * OK, we're invoking a handler:
  */
+static int signr_convert(int sig)
+{
+	struct thread_info *info = current_thread_info();
+
+	if (info->exec_domain && info->exec_domain->signal_invmap && sig < 32)
+		return info->exec_domain->signal_invmap[sig];
+	return sig;
+}
+
+#define is_ia32	1
+#define ia32_setup_frame	__setup_frame
+#define ia32_setup_rt_frame	__setup_rt_frame
+
+static int
+setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+	       sigset_t *set, struct pt_regs *regs)
+{
+	int usig = signr_convert(sig);
+	int ret;
+
+	/* Set up the stack frame */
+	if (is_ia32) {
+		if (ka->sa.sa_flags & SA_SIGINFO)
+			ret = ia32_setup_rt_frame(usig, ka, info, set, regs);
+		else
+			ret = ia32_setup_frame(usig, ka, set, regs);
+	} else
+		ret = __setup_rt_frame(sig, ka, info, set, regs);
+
+	if (ret) {
+		force_sigsegv(sig, current);
+		return -EFAULT;
+	}
+
+	return ret;
+}
+
 static int
 handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	      sigset_t *oldset, struct pt_regs *regs)
@@ -508,9 +523,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	int ret;
 
 	/* Are we from a system call? */
-	if ((long)regs->orig_ax >= 0) {
+	if (syscall_get_nr(current, regs) >= 0) {
 		/* If so, check system call restarting.. */
-		switch (regs->ax) {
+		switch (syscall_get_error(current, regs)) {
 		case -ERESTART_RESTARTBLOCK:
 		case -ERESTARTNOHAND:
 			regs->ax = -EINTR;
@@ -537,15 +552,20 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	    likely(test_and_clear_thread_flag(TIF_FORCED_TF)))
 		regs->flags &= ~X86_EFLAGS_TF;
 
-	/* Set up the stack frame */
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		ret = setup_rt_frame(sig, ka, info, oldset, regs);
-	else
-		ret = setup_frame(sig, ka, oldset, regs);
+	ret = setup_rt_frame(sig, ka, info, oldset, regs);
 
 	if (ret)
 		return ret;
 
+#ifdef CONFIG_X86_64
+	/*
+	 * This has nothing to do with segment registers,
+	 * despite the name.  This magic affects uaccess.h
+	 * macros' behavior.  Reset it to the normal setting.
+	 */
+	set_fs(USER_DS);
+#endif
+
 	/*
 	 * Clear the direction flag as per the ABI for function entry.
 	 */
@@ -558,8 +578,6 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	 * handler too.
 	 */
 	regs->flags &= ~X86_EFLAGS_TF;
-	if (test_thread_flag(TIF_SINGLESTEP))
-		ptrace_notify(SIGTRAP);
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
@@ -568,9 +586,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
+	tracehook_signal_handler(sig, info, ka, regs,
+				 test_thread_flag(TIF_SINGLESTEP));
+
 	return 0;
 }
 
+#define NR_restart_syscall	__NR_restart_syscall
 /*
  * Note that 'init' is a special process: it doesn't get signals it doesn't
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
@@ -623,9 +645,9 @@ static void do_signal(struct pt_regs *regs)
 	}
 
 	/* Did we come from a system call? */
-	if ((long)regs->orig_ax >= 0) {
+	if (syscall_get_nr(current, regs) >= 0) {
 		/* Restart the system call - no handlers present */
-		switch (regs->ax) {
+		switch (syscall_get_error(current, regs)) {
 		case -ERESTARTNOHAND:
 		case -ERESTARTSYS:
 		case -ERESTARTNOINTR:
@@ -634,7 +656,7 @@ static void do_signal(struct pt_regs *regs)
 			break;
 
 		case -ERESTART_RESTARTBLOCK:
-			regs->ax = __NR_restart_syscall;
+			regs->ax = NR_restart_syscall;
 			regs->ip -= 2;
 			break;
 		}
@@ -657,9 +679,38 @@ static void do_signal(struct pt_regs *regs)
 void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+	/* notify userspace of pending MCEs */
+	if (thread_info_flags & _TIF_MCE_NOTIFY)
+		mce_notify_user();
+#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
+
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
 
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+
+#ifdef CONFIG_X86_32
 	clear_thread_flag(TIF_IRET);
+#endif /* CONFIG_X86_32 */
+}
+
+void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
+{
+	struct task_struct *me = current;
+
+	if (show_unhandled_signals && printk_ratelimit()) {
+		printk(KERN_INFO
+		       "%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
+		       me->comm, me->pid, where, frame,
+		       regs->ip, regs->sp, regs->orig_ax);
+		print_vma_addr(" in ", regs->ip);
+		printk(KERN_CONT "\n");
+	}
+
+	force_sig(SIGSEGV, me);
 }
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index ca316b5..a5c9627 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -15,17 +15,21 @@
 #include <linux/errno.h>
 #include <linux/wait.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/unistd.h>
 #include <linux/stddef.h>
 #include <linux/personality.h>
 #include <linux/compiler.h>
+#include <linux/uaccess.h>
+
 #include <asm/processor.h>
 #include <asm/ucontext.h>
-#include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/proto.h>
 #include <asm/ia32_unistd.h>
 #include <asm/mce.h>
+#include <asm/syscall.h>
+#include <asm/syscalls.h>
 #include "sigframe.h"
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
@@ -41,11 +45,6 @@
 # define FIX_EFLAGS	__FIX_EFLAGS
 #endif
 
-int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-               sigset_t *set, struct pt_regs * regs); 
-int ia32_setup_frame(int sig, struct k_sigaction *ka,
-            sigset_t *set, struct pt_regs * regs); 
-
 asmlinkage long
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs)
@@ -53,67 +52,14 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 	return do_sigaltstack(uss, uoss, regs->sp);
 }
 
-/*
- * Signal frame handlers.
- */
-
-static inline int save_i387(struct _fpstate __user *buf)
-{
-	struct task_struct *tsk = current;
-	int err = 0;
-
-	BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
-			sizeof(tsk->thread.xstate->fxsave));
-
-	if ((unsigned long)buf % 16)
-		printk("save_i387: bad fpstate %p\n", buf);
-
-	if (!used_math())
-		return 0;
-	clear_used_math(); /* trigger finit */
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
-		err = save_i387_checking((struct i387_fxsave_struct __user *)
-					 buf);
-		if (err)
-			return err;
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
-	} else {
-		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
-				   sizeof(struct i387_fxsave_struct)))
-			return -1;
-	}
-	return 1;
+#define COPY(x)			{		\
+	err |= __get_user(regs->x, &sc->x);	\
 }
 
-/*
- * This restores directly out of user space. Exceptions are handled.
- */
-static inline int restore_i387(struct _fpstate __user *buf)
-{
-	struct task_struct *tsk = current;
-	int err;
-
-	if (!used_math()) {
-		err = init_fpu(tsk);
-		if (err)
-			return err;
-	}
-
-	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
-		clts();
-		task_thread_info(current)->status |= TS_USEDFPU;
-	}
-	err = restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
-	if (unlikely(err)) {
-		/*
-		 * Encountered an error while doing the restore from the
-		 * user buffer, clear the fpu state.
-		 */
-		clear_fpu(tsk);
-		clear_used_math();
-	}
-	return err;
+#define COPY_SEG_STRICT(seg)	{			\
+		unsigned short tmp;			\
+		err |= __get_user(tmp, &sc->seg);	\
+		regs->seg = tmp | 3;			\
 }
 
 /*
@@ -123,13 +69,13 @@ static int
 restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 		   unsigned long *pax)
 {
+	void __user *buf;
+	unsigned int tmpflags;
 	unsigned int err = 0;
 
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
-#define COPY(x)		err |= __get_user(regs->x, &sc->x)
-
 	COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
 	COPY(dx); COPY(cx); COPY(ip);
 	COPY(r8);
@@ -144,48 +90,24 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 	/* Kernel saves and restores only the CS segment register on signals,
 	 * which is the bare minimum needed to allow mixed 32/64-bit code.
 	 * App's signal handler can save/restore other segments if needed. */
-	{
-		unsigned cs;
-		err |= __get_user(cs, &sc->cs);
-		regs->cs = cs | 3;	/* Force into user mode */
-	}
+	COPY_SEG_STRICT(cs);
 
-	{
-		unsigned int tmpflags;
-		err |= __get_user(tmpflags, &sc->flags);
-		regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
-		regs->orig_ax = -1;		/* disable syscall checks */
-	}
+	err |= __get_user(tmpflags, &sc->flags);
+	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+	regs->orig_ax = -1;		/* disable syscall checks */
 
-	{
-		struct _fpstate __user * buf;
-		err |= __get_user(buf, &sc->fpstate);
-
-		if (buf) {
-			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
-				goto badframe;
-			err |= restore_i387(buf);
-		} else {
-			struct task_struct *me = current;
-			if (used_math()) {
-				clear_fpu(me);
-				clear_used_math();
-			}
-		}
-	}
+	err |= __get_user(buf, &sc->fpstate);
+	err |= restore_i387_xstate(buf);
 
 	err |= __get_user(*pax, &sc->ax);
 	return err;
-
-badframe:
-	return 1;
 }
 
-asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
+static long do_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
-	sigset_t set;
 	unsigned long ax;
+	sigset_t set;
 
 	frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -198,7 +120,7 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 	current->blocked = set;
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-	
+
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
 		goto badframe;
 
@@ -208,16 +130,22 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 	return ax;
 
 badframe:
-	signal_fault(regs,frame,"sigreturn");
+	signal_fault(regs, frame, "rt_sigreturn");
 	return 0;
-}	
+}
+
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
+{
+	return do_rt_sigreturn(regs);
+}
 
 /*
  * Set up a signal frame.
  */
 
 static inline int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask, struct task_struct *me)
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+		unsigned long mask, struct task_struct *me)
 {
 	int err = 0;
 
@@ -269,41 +197,40 @@ get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size)
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
-	return (void __user *)round_down(sp - size, 16);
+	return (void __user *)round_down(sp - size, 64);
 }
 
-static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			   sigset_t *set, struct pt_regs * regs)
+static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			    sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
-	struct _fpstate __user *fp = NULL; 
+	void __user *fp = NULL;
 	int err = 0;
 	struct task_struct *me = current;
 
 	if (used_math()) {
-		fp = get_stack(ka, regs, sizeof(struct _fpstate)); 
+		fp = get_stack(ka, regs, sig_xstate_size);
 		frame = (void __user *)round_down(
 			(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
 
-		if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
-			goto give_sigsegv;
-
-		if (save_i387(fp) < 0) 
-			err |= -1; 
+		if (save_i387_xstate(fp) < 0)
+			return -EFAULT;
 	} else
 		frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8;
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
+		return -EFAULT;
 
-	if (ka->sa.sa_flags & SA_SIGINFO) { 
-		err |= copy_siginfo_to_user(&frame->info, info);
-		if (err)
-			goto give_sigsegv;
+	if (ka->sa.sa_flags & SA_SIGINFO) {
+		if (copy_siginfo_to_user(&frame->info, info))
+			return -EFAULT;
 	}
-		
+
 	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
+	if (cpu_has_xsave)
+		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+	else
+		err |= __put_user(0, &frame->uc.uc_flags);
 	err |= __put_user(0, &frame->uc.uc_link);
 	err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->sp),
@@ -311,9 +238,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
 	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me);
 	err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate);
-	if (sizeof(*set) == 16) { 
+	if (sizeof(*set) == 16) {
 		__put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
-		__put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]); 
+		__put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
 	} else
 		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 
@@ -324,15 +251,15 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
 	} else {
 		/* could use a vstub here */
-		goto give_sigsegv; 
+		return -EFAULT;
 	}
 
 	if (err)
-		goto give_sigsegv;
+		return -EFAULT;
 
 	/* Set up registers for signal handler */
 	regs->di = sig;
-	/* In case the signal handler was declared without prototypes */ 
+	/* In case the signal handler was declared without prototypes */
 	regs->ax = 0;
 
 	/* This also works for non SA_SIGINFO handlers because they expect the
@@ -348,44 +275,45 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->cs = __USER_CS;
 
 	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return -EFAULT;
 }
 
 /*
- * Return -1L or the syscall number that @regs is executing.
+ * OK, we're invoking a handler
  */
-static long current_syscall(struct pt_regs *regs)
+static int signr_convert(int sig)
 {
-	/*
-	 * We always sign-extend a -1 value being set here,
-	 * so this is always either -1L or a syscall number.
-	 */
-	return regs->orig_ax;
+	return sig;
 }
 
-/*
- * Return a value that is -EFOO if the system call in @regs->orig_ax
- * returned an error.  This only works for @regs from @current.
- */
-static long current_syscall_ret(struct pt_regs *regs)
-{
 #ifdef CONFIG_IA32_EMULATION
-	if (test_thread_flag(TIF_IA32))
-		/*
-		 * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
-		 * and will match correctly in comparisons.
-		 */
-		return (int) regs->ax;
+#define is_ia32	test_thread_flag(TIF_IA32)
+#else
+#define is_ia32	0
 #endif
-	return regs->ax;
-}
 
-/*
- * OK, we're invoking a handler
- */	
+static int
+setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+	       sigset_t *set, struct pt_regs *regs)
+{
+	int usig = signr_convert(sig);
+	int ret;
+
+	/* Set up the stack frame */
+	if (is_ia32) {
+		if (ka->sa.sa_flags & SA_SIGINFO)
+			ret = ia32_setup_rt_frame(usig, ka, info, set, regs);
+		else
+			ret = ia32_setup_frame(usig, ka, set, regs);
+	} else
+		ret = __setup_rt_frame(sig, ka, info, set, regs);
+
+	if (ret) {
+		force_sigsegv(sig, current);
+		return -EFAULT;
+	}
+
+	return ret;
+}
 
 static int
 handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
@@ -394,9 +322,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	int ret;
 
 	/* Are we from a system call? */
-	if (current_syscall(regs) >= 0) {
+	if (syscall_get_nr(current, regs) >= 0) {
 		/* If so, check system call restarting.. */
-		switch (current_syscall_ret(regs)) {
+		switch (syscall_get_error(current, regs)) {
 		case -ERESTART_RESTARTBLOCK:
 		case -ERESTARTNOHAND:
 			regs->ax = -EINTR;
@@ -423,50 +351,48 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	    likely(test_and_clear_thread_flag(TIF_FORCED_TF)))
 		regs->flags &= ~X86_EFLAGS_TF;
 
-#ifdef CONFIG_IA32_EMULATION
-	if (test_thread_flag(TIF_IA32)) {
-		if (ka->sa.sa_flags & SA_SIGINFO)
-			ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs);
-		else
-			ret = ia32_setup_frame(sig, ka, oldset, regs);
-	} else 
-#endif
 	ret = setup_rt_frame(sig, ka, info, oldset, regs);
 
-	if (ret == 0) {
-		/*
-		 * This has nothing to do with segment registers,
-		 * despite the name.  This magic affects uaccess.h
-		 * macros' behavior.  Reset it to the normal setting.
-		 */
-		set_fs(USER_DS);
+	if (ret)
+		return ret;
 
-		/*
-		 * Clear the direction flag as per the ABI for function entry.
-		 */
-		regs->flags &= ~X86_EFLAGS_DF;
+#ifdef CONFIG_X86_64
+	/*
+	 * This has nothing to do with segment registers,
+	 * despite the name.  This magic affects uaccess.h
+	 * macros' behavior.  Reset it to the normal setting.
+	 */
+	set_fs(USER_DS);
+#endif
 
-		/*
-		 * Clear TF when entering the signal handler, but
-		 * notify any tracer that was single-stepping it.
-		 * The tracer may want to single-step inside the
-		 * handler too.
-		 */
-		regs->flags &= ~X86_EFLAGS_TF;
-		if (test_thread_flag(TIF_SINGLESTEP))
-			ptrace_notify(SIGTRAP);
-
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked,sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	/*
+	 * Clear the direction flag as per the ABI for function entry.
+	 */
+	regs->flags &= ~X86_EFLAGS_DF;
 
-	return ret;
+	/*
+	 * Clear TF when entering the signal handler, but
+	 * notify any tracer that was single-stepping it.
+	 * The tracer may want to single-step inside the
+	 * handler too.
+	 */
+	regs->flags &= ~X86_EFLAGS_TF;
+
+	spin_lock_irq(&current->sighand->siglock);
+	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
+		sigaddset(&current->blocked, sig);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	tracehook_signal_handler(sig, info, ka, regs,
+				 test_thread_flag(TIF_SINGLESTEP));
+
+	return 0;
 }
 
+#define NR_restart_syscall	\
+	test_thread_flag(TIF_IA32) ? __NR_ia32_restart_syscall : __NR_restart_syscall
 /*
  * Note that 'init' is a special process: it doesn't get signals it doesn't
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
@@ -496,7 +422,8 @@ static void do_signal(struct pt_regs *regs)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		/* Re-enable any watchpoints before delivering the
+		/*
+		 * Re-enable any watchpoints before delivering the
 		 * signal to user space. The processor register will
 		 * have been cleared if the watchpoint triggered
 		 * inside the kernel.
@@ -504,7 +431,7 @@ static void do_signal(struct pt_regs *regs)
 		if (current->thread.debugreg7)
 			set_debugreg(current->thread.debugreg7, 7);
 
-		/* Whee!  Actually deliver the signal.  */
+		/* Whee! Actually deliver the signal.  */
 		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
 			/*
 			 * A signal was successfully delivered; the saved
@@ -518,19 +445,18 @@ static void do_signal(struct pt_regs *regs)
 	}
 
 	/* Did we come from a system call? */
-	if (current_syscall(regs) >= 0) {
+	if (syscall_get_nr(current, regs) >= 0) {
 		/* Restart the system call - no handlers present */
-		switch (current_syscall_ret(regs)) {
+		switch (syscall_get_error(current, regs)) {
 		case -ERESTARTNOHAND:
 		case -ERESTARTSYS:
 		case -ERESTARTNOINTR:
 			regs->ax = regs->orig_ax;
 			regs->ip -= 2;
 			break;
+
 		case -ERESTART_RESTARTBLOCK:
-			regs->ax = test_thread_flag(TIF_IA32) ?
-					__NR_ia32_restart_syscall :
-					__NR_restart_syscall;
+			regs->ax = NR_restart_syscall;
 			regs->ip -= 2;
 			break;
 		}
@@ -546,29 +472,45 @@ static void do_signal(struct pt_regs *regs)
 	}
 }
 
-void do_notify_resume(struct pt_regs *regs, void *unused,
-		      __u32 thread_info_flags)
+/*
+ * notification of userspace execution resumption
+ * - triggered by the TIF_WORK_MASK flags
+ */
+void
+do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
-#ifdef CONFIG_X86_MCE
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
 	/* notify userspace of pending MCEs */
 	if (thread_info_flags & _TIF_MCE_NOTIFY)
 		mce_notify_user();
-#endif /* CONFIG_X86_MCE */
+#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
 
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+
+#ifdef CONFIG_X86_32
+	clear_thread_flag(TIF_IRET);
+#endif /* CONFIG_X86_32 */
 }
 
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
-{ 
-	struct task_struct *me = current; 
+{
+	struct task_struct *me = current;
+
 	if (show_unhandled_signals && printk_ratelimit()) {
-		printk("%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
-	       me->comm,me->pid,where,frame,regs->ip,regs->sp,regs->orig_ax);
+		printk(KERN_INFO
+		       "%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
+		       me->comm, me->pid, where, frame,
+		       regs->ip, regs->sp, regs->orig_ax);
 		print_vma_addr(" in ", regs->ip);
-		printk("\n");
+		printk(KERN_CONT "\n");
 	}
 
-	force_sig(SIGSEGV, me); 
-} 
+	force_sig(SIGSEGV, me);
+}
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 361b7a4..18f9b19 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -214,12 +214,16 @@ void smp_call_function_single_interrupt(struct pt_regs *regs)
 struct smp_ops smp_ops = {
 	.smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
 	.smp_prepare_cpus = native_smp_prepare_cpus,
-	.cpu_up = native_cpu_up,
 	.smp_cpus_done = native_smp_cpus_done,
 
 	.smp_send_stop = native_smp_send_stop,
 	.smp_send_reschedule = native_smp_send_reschedule,
 
+	.cpu_up = native_cpu_up,
+	.cpu_die = native_cpu_die,
+	.cpu_disable = native_cpu_disable,
+	.play_dead = native_play_dead,
+
 	.send_call_func_ipi = native_send_call_func_ipi,
 	.send_call_func_single_ipi = native_send_call_func_single_ipi,
 };
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7985c5b..7b10933 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -52,6 +52,7 @@
 #include <asm/desc.h>
 #include <asm/nmi.h>
 #include <asm/irq.h>
+#include <asm/idle.h>
 #include <asm/smp.h>
 #include <asm/trampoline.h>
 #include <asm/cpu.h>
@@ -88,7 +89,7 @@ static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
 #define get_idle_for_cpu(x)      (per_cpu(idle_thread_array, x))
 #define set_idle_for_cpu(x, p)   (per_cpu(idle_thread_array, x) = (p))
 #else
-struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
+static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
 #define get_idle_for_cpu(x)      (idle_thread_array[(x)])
 #define set_idle_for_cpu(x, p)   (idle_thread_array[(x)] = (p))
 #endif
@@ -123,13 +124,12 @@ EXPORT_PER_CPU_SYMBOL(cpu_info);
 
 static atomic_t init_deasserted;
 
-static int boot_cpu_logical_apicid;
 
 /* representing cpus for which sibling maps can be computed */
 static cpumask_t cpu_sibling_setup_map;
 
 /* Set if we find a B stepping CPU */
-int __cpuinitdata smp_b_stepping;
+static int __cpuinitdata smp_b_stepping;
 
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_32)
 
@@ -165,6 +165,8 @@ static void unmap_cpu_to_node(int cpu)
 #endif
 
 #ifdef CONFIG_X86_32
+static int boot_cpu_logical_apicid;
+
 u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly =
 					{ [0 ... NR_CPUS-1] = BAD_APICID };
 
@@ -210,7 +212,7 @@ static void __cpuinit smp_callin(void)
 	/*
 	 * (This works even if the APIC is not enabled.)
 	 */
-	phys_id = GET_APIC_ID(read_apic_id());
+	phys_id = read_apic_id();
 	cpuid = smp_processor_id();
 	if (cpu_isset(cpuid, cpu_callin_map)) {
 		panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
@@ -257,6 +259,7 @@ static void __cpuinit smp_callin(void)
 	end_local_APIC_setup();
 	map_cpu_to_logical_apicid();
 
+	notify_cpu_starting(cpuid);
 	/*
 	 * Get our bogomips.
 	 *
@@ -279,6 +282,8 @@ static void __cpuinit smp_callin(void)
 	cpu_set(cpuid, cpu_callin_map);
 }
 
+static int __cpuinitdata unsafe_smp;
+
 /*
  * Activate a secondary processor.
  */
@@ -331,14 +336,17 @@ static void __cpuinit start_secondary(void *unused)
 	 * does not change while we are assigning vectors to cpus.  Holding
 	 * this lock ensures we don't half assign or remove an irq from a cpu.
 	 */
-	ipi_call_lock_irq();
+	ipi_call_lock();
 	lock_vector_lock();
 	__setup_vector_irq(smp_processor_id());
 	cpu_set(smp_processor_id(), cpu_online_map);
 	unlock_vector_lock();
-	ipi_call_unlock_irq();
+	ipi_call_unlock();
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 
+	/* enable local interrupts */
+	local_irq_enable();
+
 	setup_secondary_clock();
 
 	wmb();
@@ -391,7 +399,7 @@ static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c)
 				goto valid_k7;
 
 		/* If we get here, not a certified SMP capable AMD system. */
-		add_taint(TAINT_UNSAFE_SMP);
+		unsafe_smp = 1;
 	}
 
 valid_k7:
@@ -408,12 +416,10 @@ static void __cpuinit smp_checks(void)
 	 * Don't taint if we are running SMP kernel on a single non-MP
 	 * approved Athlon
 	 */
-	if (tainted & TAINT_UNSAFE_SMP) {
-		if (num_online_cpus())
-			printk(KERN_INFO "WARNING: This combination of AMD"
-				"processors is not suitable for SMP.\n");
-		else
-			tainted &= ~TAINT_UNSAFE_SMP;
+	if (unsafe_smp && num_online_cpus() > 1) {
+		printk(KERN_INFO "WARNING: This combination of AMD"
+			"processors is not suitable for SMP.\n");
+		add_taint(TAINT_UNSAFE_SMP);
 	}
 }
 
@@ -537,10 +543,10 @@ static inline void __inquire_remote_apic(int apicid)
 	int timeout;
 	u32 status;
 
-	printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid);
+	printk(KERN_INFO "Inquiring remote APIC 0x%x...\n", apicid);
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
-		printk(KERN_INFO "... APIC #%d %s: ", apicid, names[i]);
+		printk(KERN_INFO "... APIC 0x%x %s: ", apicid, names[i]);
 
 		/*
 		 * Wait for idle.
@@ -550,8 +556,7 @@ static inline void __inquire_remote_apic(int apicid)
 			printk(KERN_CONT
 			       "a previous APIC delivery may have failed\n");
 
-		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-		apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
+		apic_icr_write(APIC_DM_REMRD | regs[i], apicid);
 
 		timeout = 0;
 		do {
@@ -583,11 +588,9 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
 	int maxlvt;
 
 	/* Target chip */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
-
 	/* Boot on the stack */
 	/* Kick the second */
-	apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
+	apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid);
 
 	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
@@ -596,10 +599,12 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
 	 * Give the other CPU some time to accept the IPI.
 	 */
 	udelay(200);
-	maxlvt = lapic_get_maxlvt();
-	if (maxlvt > 3)			/* Due to the Pentium erratum 3AP.  */
-		apic_write(APIC_ESR, 0);
-	accept_status = (apic_read(APIC_ESR) & 0xEF);
+	if (APIC_INTEGRATED(apic_version[phys_apicid])) {
+		maxlvt = lapic_get_maxlvt();
+		if (maxlvt > 3)			/* Due to the Pentium erratum 3AP.  */
+			apic_write(APIC_ESR, 0);
+		accept_status = (apic_read(APIC_ESR) & 0xEF);
+	}
 	pr_debug("NMI sent.\n");
 
 	if (send_status)
@@ -640,13 +645,11 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	/*
 	 * Turn INIT on target chip
 	 */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
 	/*
 	 * Send IPI
 	 */
-	apic_write(APIC_ICR,
-		   APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
+	apic_icr_write(APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT,
+		       phys_apicid);
 
 	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
@@ -656,10 +659,8 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	pr_debug("Deasserting INIT.\n");
 
 	/* Target chip */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
 	/* Send IPI */
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+	apic_icr_write(APIC_INT_LEVELTRIG | APIC_DM_INIT, phys_apicid);
 
 	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
@@ -702,11 +703,10 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 		 */
 
 		/* Target chip */
-		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
 		/* Boot on the stack */
 		/* Kick the second */
-		apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12));
+		apic_icr_write(APIC_DM_STARTUP | (start_eip >> 12),
+			       phys_apicid);
 
 		/*
 		 * Give the other CPU some time to accept the IPI.
@@ -874,7 +874,7 @@ do_rest:
 	start_ip = setup_trampoline();
 
 	/* So we see what's up   */
-	printk(KERN_INFO "Booting processor %d/%d ip %lx\n",
+	printk(KERN_INFO "Booting processor %d APIC 0x%x ip 0x%lx\n",
 			  cpu, apicid, start_ip);
 
 	/*
@@ -893,9 +893,11 @@ do_rest:
 		smpboot_setup_warm_reset_vector(start_ip);
 		/*
 		 * Be paranoid about clearing APIC errors.
-	 	*/
-		apic_write(APIC_ESR, 0);
-		apic_read(APIC_ESR);
+		*/
+		if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+			apic_write(APIC_ESR, 0);
+			apic_read(APIC_ESR);
+		}
 	}
 
 	/*
@@ -1175,10 +1177,17 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	 * Setup boot CPU information
 	 */
 	smp_store_cpu_info(0); /* Final full version of the data */
+#ifdef CONFIG_X86_32
 	boot_cpu_logical_apicid = logical_smp_processor_id();
+#endif
 	current_thread_info()->cpu = 0;  /* needed? */
 	set_cpu_sibling_map(0);
 
+#ifdef CONFIG_X86_64
+	enable_IR_x2apic();
+	setup_apic_routing();
+#endif
+
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
 		disable_smp();
@@ -1186,9 +1195,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	}
 
 	preempt_disable();
-	if (GET_APIC_ID(read_apic_id()) != boot_cpu_physical_apicid) {
+	if (read_apic_id() != boot_cpu_physical_apicid) {
 		panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
-		     GET_APIC_ID(read_apic_id()), boot_cpu_physical_apicid);
+		     read_apic_id(), boot_cpu_physical_apicid);
 		/* Or can we switch back to PIC here? */
 	}
 	preempt_enable();
@@ -1254,39 +1263,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 	check_nmi_watchdog();
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-
-static void remove_siblinginfo(int cpu)
-{
-	int sibling;
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-
-	for_each_cpu_mask_nr(sibling, per_cpu(cpu_core_map, cpu)) {
-		cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
-		/*/
-		 * last thread sibling in this cpu core going down
-		 */
-		if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
-			cpu_data(sibling).booted_cores--;
-	}
-
-	for_each_cpu_mask_nr(sibling, per_cpu(cpu_sibling_map, cpu))
-		cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
-	cpus_clear(per_cpu(cpu_sibling_map, cpu));
-	cpus_clear(per_cpu(cpu_core_map, cpu));
-	c->phys_proc_id = 0;
-	c->cpu_core_id = 0;
-	cpu_clear(cpu, cpu_sibling_setup_map);
-}
-
-static int additional_cpus __initdata = -1;
-
-static __init int setup_additional_cpus(char *s)
-{
-	return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
-}
-early_param("additional_cpus", setup_additional_cpus);
-
 /*
  * cpu_possible_map should be static, it cannot change as cpu's
  * are onlined, or offlined. The reason is per-cpu data-structures
@@ -1306,24 +1282,13 @@ early_param("additional_cpus", setup_additional_cpus);
  */
 __init void prefill_possible_map(void)
 {
-	int i;
-	int possible;
+	int i, possible;
 
 	/* no processor from mptable or madt */
 	if (!num_processors)
 		num_processors = 1;
 
-#ifdef CONFIG_HOTPLUG_CPU
-	if (additional_cpus == -1) {
-		if (disabled_cpus > 0)
-			additional_cpus = disabled_cpus;
-		else
-			additional_cpus = 0;
-	}
-#else
-	additional_cpus = 0;
-#endif
-	possible = num_processors + additional_cpus;
+	possible = num_processors + disabled_cpus;
 	if (possible > NR_CPUS)
 		possible = NR_CPUS;
 
@@ -1336,6 +1301,31 @@ __init void prefill_possible_map(void)
 	nr_cpu_ids = possible;
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+
+static void remove_siblinginfo(int cpu)
+{
+	int sibling;
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	for_each_cpu_mask_nr(sibling, per_cpu(cpu_core_map, cpu)) {
+		cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
+		/*/
+		 * last thread sibling in this cpu core going down
+		 */
+		if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
+			cpu_data(sibling).booted_cores--;
+	}
+
+	for_each_cpu_mask_nr(sibling, per_cpu(cpu_sibling_map, cpu))
+		cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
+	cpus_clear(per_cpu(cpu_sibling_map, cpu));
+	cpus_clear(per_cpu(cpu_core_map, cpu));
+	c->phys_proc_id = 0;
+	c->cpu_core_id = 0;
+	cpu_clear(cpu, cpu_sibling_setup_map);
+}
+
 static void __ref remove_cpu_from_maps(int cpu)
 {
 	cpu_clear(cpu, cpu_online_map);
@@ -1346,25 +1336,9 @@ static void __ref remove_cpu_from_maps(int cpu)
 	numa_remove_cpu(cpu);
 }
 
-int __cpu_disable(void)
+void cpu_disable_common(void)
 {
 	int cpu = smp_processor_id();
-
-	/*
-	 * Perhaps use cpufreq to drop frequency, but that could go
-	 * into generic code.
-	 *
-	 * We won't take down the boot processor on i386 due to some
-	 * interrupts only being able to be serviced by the BSP.
-	 * Especially so if we're not using an IOAPIC	-zwane
-	 */
-	if (cpu == 0)
-		return -EBUSY;
-
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		stop_apic_nmi_watchdog(NULL);
-	clear_local_APIC();
-
 	/*
 	 * HACK:
 	 * Allow any queued timer interrupts to get serviced
@@ -1382,10 +1356,32 @@ int __cpu_disable(void)
 	remove_cpu_from_maps(cpu);
 	unlock_vector_lock();
 	fixup_irqs(cpu_online_map);
+}
+
+int native_cpu_disable(void)
+{
+	int cpu = smp_processor_id();
+
+	/*
+	 * Perhaps use cpufreq to drop frequency, but that could go
+	 * into generic code.
+	 *
+	 * We won't take down the boot processor on i386 due to some
+	 * interrupts only being able to be serviced by the BSP.
+	 * Especially so if we're not using an IOAPIC	-zwane
+	 */
+	if (cpu == 0)
+		return -EBUSY;
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		stop_apic_nmi_watchdog(NULL);
+	clear_local_APIC();
+
+	cpu_disable_common();
 	return 0;
 }
 
-void __cpu_die(unsigned int cpu)
+void native_cpu_die(unsigned int cpu)
 {
 	/* We don't do anything here: idle task is faking death itself. */
 	unsigned int i;
@@ -1402,15 +1398,45 @@ void __cpu_die(unsigned int cpu)
 	}
 	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
 }
+
+void play_dead_common(void)
+{
+	idle_task_exit();
+	reset_lazy_tlbstate();
+	irq_ctx_exit(raw_smp_processor_id());
+	c1e_remove_cpu(raw_smp_processor_id());
+
+	mb();
+	/* Ack it */
+	__get_cpu_var(cpu_state) = CPU_DEAD;
+
+	/*
+	 * With physical CPU hotplug, we should halt the cpu
+	 */
+	local_irq_disable();
+}
+
+void native_play_dead(void)
+{
+	play_dead_common();
+	wbinvd_halt();
+}
+
 #else /* ... !CONFIG_HOTPLUG_CPU */
-int __cpu_disable(void)
+int native_cpu_disable(void)
 {
 	return -ENOSYS;
 }
 
-void __cpu_die(unsigned int cpu)
+void native_cpu_die(unsigned int cpu)
 {
 	/* We said "no" in __cpu_disable */
 	BUG();
 }
+
+void native_play_dead(void)
+{
+	BUG();
+}
+
 #endif
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index d67ce5f..7b98785 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -30,7 +30,7 @@
 #include <linux/init.h>
 #include <asm/io.h>
 #include <asm/bios_ebda.h>
-#include <asm/mach-summit/mach_mpparse.h>
+#include <asm/summit/mpparse.h>
 
 static struct rio_table_hdr *rio_table_hdr __initdata;
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index 7066cb8..1884a8d 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -22,6 +22,8 @@
 #include <linux/uaccess.h>
 #include <linux/unistd.h>
 
+#include <asm/syscalls.h>
+
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long prot, unsigned long flags,
 			  unsigned long fd, unsigned long pgoff)
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 3b360ef..6bc211a 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -13,15 +13,17 @@
 #include <linux/utsname.h>
 #include <linux/personality.h>
 #include <linux/random.h>
+#include <linux/uaccess.h>
 
-#include <asm/uaccess.h>
 #include <asm/ia32.h>
+#include <asm/syscalls.h>
 
-asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long off)
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
+		unsigned long prot, unsigned long flags,
+		unsigned long fd, unsigned long off)
 {
 	long error;
-	struct file * file;
+	struct file *file;
 
 	error = -EINVAL;
 	if (off & ~PAGE_MASK)
@@ -56,9 +58,9 @@ static void find_start_end(unsigned long flags, unsigned long *begin,
 		   unmapped base down for this case. This can give
 		   conflicts with the heap, but we assume that glibc
 		   malloc knows how to fall back to mmap. Give it 1GB
-		   of playground for now. -AK */ 
-		*begin = 0x40000000; 
-		*end = 0x80000000;		
+		   of playground for now. -AK */
+		*begin = 0x40000000;
+		*end = 0x80000000;
 		if (current->flags & PF_RANDOMIZE) {
 			new_begin = randomize_range(*begin, *begin + 0x02000000, 0);
 			if (new_begin)
@@ -66,9 +68,9 @@ static void find_start_end(unsigned long flags, unsigned long *begin,
 		}
 	} else {
 		*begin = TASK_UNMAPPED_BASE;
-		*end = TASK_SIZE; 
+		*end = TASK_SIZE;
 	}
-} 
+}
 
 unsigned long
 arch_get_unmapped_area(struct file *filp, unsigned long addr,
@@ -78,11 +80,11 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	struct vm_area_struct *vma;
 	unsigned long start_addr;
 	unsigned long begin, end;
-	
+
 	if (flags & MAP_FIXED)
 		return addr;
 
-	find_start_end(flags, &begin, &end); 
+	find_start_end(flags, &begin, &end);
 
 	if (len > end)
 		return -ENOMEM;
@@ -96,12 +98,12 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	}
 	if (((flags & MAP_32BIT) || test_thread_flag(TIF_IA32))
 	    && len <= mm->cached_hole_size) {
-	        mm->cached_hole_size = 0;
+		mm->cached_hole_size = 0;
 		mm->free_area_cache = begin;
 	}
 	addr = mm->free_area_cache;
-	if (addr < begin) 
-		addr = begin; 
+	if (addr < begin)
+		addr = begin;
 	start_addr = addr;
 
 full_search:
@@ -127,7 +129,7 @@ full_search:
 			return addr;
 		}
 		if (addr + mm->cached_hole_size < vma->vm_start)
-		        mm->cached_hole_size = vma->vm_start - addr;
+			mm->cached_hole_size = vma->vm_start - addr;
 
 		addr = vma->vm_end;
 	}
@@ -177,7 +179,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 		vma = find_vma(mm, addr-len);
 		if (!vma || addr <= vma->vm_start)
 			/* remember the address as a hint for next time */
-			return (mm->free_area_cache = addr-len);
+			return mm->free_area_cache = addr-len;
 	}
 
 	if (mm->mmap_base < len)
@@ -194,7 +196,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 		vma = find_vma(mm, addr);
 		if (!vma || addr+len <= vma->vm_start)
 			/* remember the address as a hint for next time */
-			return (mm->free_area_cache = addr);
+			return mm->free_area_cache = addr;
 
 		/* remember the largest hole we saw so far */
 		if (addr + mm->cached_hole_size < vma->vm_start)
@@ -224,13 +226,13 @@ bottomup:
 }
 
 
-asmlinkage long sys_uname(struct new_utsname __user * name)
+asmlinkage long sys_uname(struct new_utsname __user *name)
 {
 	int err;
 	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
+	err = copy_to_user(name, utsname(), sizeof(*name));
 	up_read(&uts_sem);
-	if (personality(current->personality) == PER_LINUX32) 
-		err |= copy_to_user(&name->machine, "i686", 5); 		
+	if (personality(current->personality) == PER_LINUX32)
+		err |= copy_to_user(&name->machine, "i686", 5);
 	return err ? -EFAULT : 0;
 }
diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c
index 170d43c..de87d60 100644
--- a/arch/x86/kernel/syscall_64.c
+++ b/arch/x86/kernel/syscall_64.c
@@ -8,12 +8,12 @@
 #define __NO_STUBS
 
 #define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef _ASM_X86_64_UNISTD_H_
+#undef _ASM_X86_UNISTD_64_H
 #include <asm/unistd_64.h>
 
 #undef __SYSCALL
 #define __SYSCALL(nr, sym) [nr] = sym,
-#undef _ASM_X86_64_UNISTD_H_
+#undef _ASM_X86_UNISTD_64_H
 
 typedef void (*sys_call_ptr_t)(void);
 
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index ffe3c66..77b400f 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -36,6 +36,7 @@
 #include <asm/arch_hooks.h>
 #include <asm/hpet.h>
 #include <asm/time.h>
+#include <asm/timer.h>
 
 #include "do_timer.h"
 
@@ -46,10 +47,9 @@ unsigned long profile_pc(struct pt_regs *regs)
 	unsigned long pc = instruction_pointer(regs);
 
 #ifdef CONFIG_SMP
-	if (!v8086_mode(regs) && SEGMENT_IS_KERNEL_CODE(regs->cs) &&
-	    in_lock_functions(pc)) {
+	if (!user_mode_vm(regs) && in_lock_functions(pc)) {
 #ifdef CONFIG_FRAME_POINTER
-		return *(unsigned long *)(regs->bp + 4);
+		return *(unsigned long *)(regs->bp + sizeof(long));
 #else
 		unsigned long *sp = (unsigned long *)&regs->sp;
 
@@ -94,6 +94,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 	do_timer_interrupt_hook();
 
+#ifdef CONFIG_MCA
 	if (MCA_bus) {
 		/* The PS/2 uses level-triggered interrupts.  You can't
 		turn them off, nor would you want to (any attempt to
@@ -107,6 +108,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 		u8 irq_v = inb_p( 0x61 );	/* read the current state */
 		outb_p( irq_v|0x80, 0x61 );	/* reset the IRQ */
 	}
+#endif
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index e3d49c5..cb19d65 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/time.h>
+#include <linux/mca.h>
 
 #include <asm/i8253.h>
 #include <asm/hpet.h>
@@ -33,23 +34,34 @@ unsigned long profile_pc(struct pt_regs *regs)
 	/* Assume the lock function has either no stack frame or a copy
 	   of flags from PUSHF
 	   Eflags always has bits 22 and up cleared unlike kernel addresses. */
-	if (!user_mode(regs) && in_lock_functions(pc)) {
+	if (!user_mode_vm(regs) && in_lock_functions(pc)) {
+#ifdef CONFIG_FRAME_POINTER
+		return *(unsigned long *)(regs->bp + sizeof(long));
+#else
 		unsigned long *sp = (unsigned long *)regs->sp;
 		if (sp[0] >> 22)
 			return sp[0];
 		if (sp[1] >> 22)
 			return sp[1];
+#endif
 	}
 	return pc;
 }
 EXPORT_SYMBOL(profile_pc);
 
-static irqreturn_t timer_event_interrupt(int irq, void *dev_id)
+irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	add_pda(irq0_irqs, 1);
 
 	global_clock_event->event_handler(global_clock_event);
 
+#ifdef CONFIG_MCA
+	if (MCA_bus) {
+		u8 irq_v = inb_p(0x61);       /* read the current state */
+		outb_p(irq_v|0x80, 0x61);     /* reset the IRQ */
+	}
+#endif
+
 	return IRQ_HANDLED;
 }
 
@@ -100,7 +112,7 @@ unsigned long __init calibrate_cpu(void)
 }
 
 static struct irqaction irq0 = {
-	.handler	= timer_event_interrupt,
+	.handler	= timer_interrupt,
 	.flags		= IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING,
 	.mask		= CPU_MASK_NONE,
 	.name		= "timer"
@@ -111,16 +123,13 @@ void __init hpet_time_init(void)
 	if (!hpet_enable())
 		setup_pit_timer();
 
+	irq0.mask = cpumask_of_cpu(0);
 	setup_irq(0, &irq0);
 }
 
 void __init time_init(void)
 {
 	tsc_init();
-	if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
-		vgetcpu_mode = VGETCPU_RDTSCP;
-	else
-		vgetcpu_mode = VGETCPU_LSL;
 
 	late_time_init = choose_time_init();
 }
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index fec1ece..e00534b 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -241,3 +241,11 @@ void flush_tlb_all(void)
 	on_each_cpu(do_flush_tlb_all, NULL, 1);
 }
 
+void reset_lazy_tlbstate(void)
+{
+	int cpu = raw_smp_processor_id();
+
+	per_cpu(cpu_tlbstate, cpu).state = 0;
+	per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
+}
+
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 8b8c0d6..04431f3 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -6,7 +6,7 @@
  *	This code is released under the GNU General Public License version 2 or
  *	later.
  */
-#include <linux/mc146818rtc.h>
+#include <linux/seq_file.h>
 #include <linux/proc_fs.h>
 #include <linux/kernel.h>
 
diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c
index ab6bf37..6bb7b85 100644
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -10,6 +10,7 @@
 #include <asm/ldt.h>
 #include <asm/processor.h>
 #include <asm/proto.h>
+#include <asm/syscalls.h>
 
 #include "tls.h"
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
new file mode 100644
index 0000000..04d242a
--- /dev/null
+++ b/arch/x86/kernel/traps.c
@@ -0,0 +1,1026 @@
+/*
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
+ *
+ *  Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+/*
+ * Handle hardware traps and faults.
+ */
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/spinlock.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/utsname.h>
+#include <linux/kdebug.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/unwind.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kexec.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/bug.h>
+#include <linux/nmi.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#ifdef CONFIG_EISA
+#include <linux/ioport.h>
+#include <linux/eisa.h>
+#endif
+
+#ifdef CONFIG_MCA
+#include <linux/mca.h>
+#endif
+
+#if defined(CONFIG_EDAC)
+#include <linux/edac.h>
+#endif
+
+#include <asm/stacktrace.h>
+#include <asm/processor.h>
+#include <asm/debugreg.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/unwind.h>
+#include <asm/traps.h>
+#include <asm/desc.h>
+#include <asm/i387.h>
+
+#include <mach_traps.h>
+
+#ifdef CONFIG_X86_64
+#include <asm/pgalloc.h>
+#include <asm/proto.h>
+#include <asm/pda.h>
+#else
+#include <asm/processor-flags.h>
+#include <asm/arch_hooks.h>
+#include <asm/nmi.h>
+#include <asm/smp.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+
+#include "cpu/mcheck/mce.h"
+
+DECLARE_BITMAP(used_vectors, NR_VECTORS);
+EXPORT_SYMBOL_GPL(used_vectors);
+
+asmlinkage int system_call(void);
+
+/* Do we ignore FPU interrupts ? */
+char ignore_fpu_irq;
+
+/*
+ * The IDT has to be page-aligned to simplify the Pentium
+ * F0 0F bug workaround.. We have a special link segment
+ * for this.
+ */
+gate_desc idt_table[256]
+	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
+#endif
+
+static int ignore_nmis;
+
+static inline void conditional_sti(struct pt_regs *regs)
+{
+	if (regs->flags & X86_EFLAGS_IF)
+		local_irq_enable();
+}
+
+static inline void preempt_conditional_sti(struct pt_regs *regs)
+{
+	inc_preempt_count();
+	if (regs->flags & X86_EFLAGS_IF)
+		local_irq_enable();
+}
+
+static inline void preempt_conditional_cli(struct pt_regs *regs)
+{
+	if (regs->flags & X86_EFLAGS_IF)
+		local_irq_disable();
+	dec_preempt_count();
+}
+
+#ifdef CONFIG_X86_32
+static inline void
+die_if_kernel(const char *str, struct pt_regs *regs, long err)
+{
+	if (!user_mode_vm(regs))
+		die(str, regs, err);
+}
+
+/*
+ * Perform the lazy TSS's I/O bitmap copy. If the TSS has an
+ * invalid offset set (the LAZY one) and the faulting thread has
+ * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS,
+ * we set the offset field correctly and return 1.
+ */
+static int lazy_iobitmap_copy(void)
+{
+	struct thread_struct *thread;
+	struct tss_struct *tss;
+	int cpu;
+
+	cpu = get_cpu();
+	tss = &per_cpu(init_tss, cpu);
+	thread = &current->thread;
+
+	if (tss->x86_tss.io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY &&
+	    thread->io_bitmap_ptr) {
+		memcpy(tss->io_bitmap, thread->io_bitmap_ptr,
+		       thread->io_bitmap_max);
+		/*
+		 * If the previously set map was extending to higher ports
+		 * than the current one, pad extra space with 0xff (no access).
+		 */
+		if (thread->io_bitmap_max < tss->io_bitmap_max) {
+			memset((char *) tss->io_bitmap +
+				thread->io_bitmap_max, 0xff,
+				tss->io_bitmap_max - thread->io_bitmap_max);
+		}
+		tss->io_bitmap_max = thread->io_bitmap_max;
+		tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
+		tss->io_bitmap_owner = thread;
+		put_cpu();
+
+		return 1;
+	}
+	put_cpu();
+
+	return 0;
+}
+#endif
+
+static void __kprobes
+do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
+	long error_code, siginfo_t *info)
+{
+	struct task_struct *tsk = current;
+
+#ifdef CONFIG_X86_32
+	if (regs->flags & X86_VM_MASK) {
+		/*
+		 * traps 0, 1, 3, 4, and 5 should be forwarded to vm86.
+		 * On nmi (interrupt 2), do_trap should not be called.
+		 */
+		if (trapnr < 6)
+			goto vm86_trap;
+		goto trap_signal;
+	}
+#endif
+
+	if (!user_mode(regs))
+		goto kernel_trap;
+
+#ifdef CONFIG_X86_32
+trap_signal:
+#endif
+	/*
+	 * We want error_code and trap_no set for userspace faults and
+	 * kernelspace faults which result in die(), but not
+	 * kernelspace faults which are fixed up.  die() gives the
+	 * process no chance to handle the signal and notice the
+	 * kernel fault information, so that won't result in polluting
+	 * the information about previously queued, but not yet
+	 * delivered, faults.  See also do_general_protection below.
+	 */
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = trapnr;
+
+#ifdef CONFIG_X86_64
+	if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
+	    printk_ratelimit()) {
+		printk(KERN_INFO
+		       "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
+		       tsk->comm, tsk->pid, str,
+		       regs->ip, regs->sp, error_code);
+		print_vma_addr(" in ", regs->ip);
+		printk("\n");
+	}
+#endif
+
+	if (info)
+		force_sig_info(signr, info, tsk);
+	else
+		force_sig(signr, tsk);
+	return;
+
+kernel_trap:
+	if (!fixup_exception(regs)) {
+		tsk->thread.error_code = error_code;
+		tsk->thread.trap_no = trapnr;
+		die(str, regs, error_code);
+	}
+	return;
+
+#ifdef CONFIG_X86_32
+vm86_trap:
+	if (handle_vm86_trap((struct kernel_vm86_regs *) regs,
+						error_code, trapnr))
+		goto trap_signal;
+	return;
+#endif
+}
+
+#define DO_ERROR(trapnr, signr, str, name)				\
+dotraplinkage void do_##name(struct pt_regs *regs, long error_code)	\
+{									\
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
+							== NOTIFY_STOP)	\
+		return;							\
+	conditional_sti(regs);						\
+	do_trap(trapnr, signr, str, regs, error_code, NULL);		\
+}
+
+#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)		\
+dotraplinkage void do_##name(struct pt_regs *regs, long error_code)	\
+{									\
+	siginfo_t info;							\
+	info.si_signo = signr;						\
+	info.si_errno = 0;						\
+	info.si_code = sicode;						\
+	info.si_addr = (void __user *)siaddr;				\
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
+							== NOTIFY_STOP)	\
+		return;							\
+	conditional_sti(regs);						\
+	do_trap(trapnr, signr, str, regs, error_code, &info);		\
+}
+
+DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
+DO_ERROR(4, SIGSEGV, "overflow", overflow)
+DO_ERROR(5, SIGSEGV, "bounds", bounds)
+DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
+DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
+DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
+DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
+#ifdef CONFIG_X86_32
+DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
+#endif
+DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
+
+#ifdef CONFIG_X86_64
+/* Runs on IST stack */
+dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
+{
+	if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
+			12, SIGBUS) == NOTIFY_STOP)
+		return;
+	preempt_conditional_sti(regs);
+	do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
+	preempt_conditional_cli(regs);
+}
+
+dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
+{
+	static const char str[] = "double fault";
+	struct task_struct *tsk = current;
+
+	/* Return not checked because double check cannot be ignored */
+	notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV);
+
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 8;
+
+	/* This is always a kernel trap and never fixable (and thus must
+	   never return). */
+	for (;;)
+		die(str, regs, error_code);
+}
+#endif
+
+dotraplinkage void __kprobes
+do_general_protection(struct pt_regs *regs, long error_code)
+{
+	struct task_struct *tsk;
+
+	conditional_sti(regs);
+
+#ifdef CONFIG_X86_32
+	if (lazy_iobitmap_copy()) {
+		/* restart the faulting instruction */
+		return;
+	}
+
+	if (regs->flags & X86_VM_MASK)
+		goto gp_in_vm86;
+#endif
+
+	tsk = current;
+	if (!user_mode(regs))
+		goto gp_in_kernel;
+
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 13;
+
+	if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
+			printk_ratelimit()) {
+		printk(KERN_INFO
+			"%s[%d] general protection ip:%lx sp:%lx error:%lx",
+			tsk->comm, task_pid_nr(tsk),
+			regs->ip, regs->sp, error_code);
+		print_vma_addr(" in ", regs->ip);
+		printk("\n");
+	}
+
+	force_sig(SIGSEGV, tsk);
+	return;
+
+#ifdef CONFIG_X86_32
+gp_in_vm86:
+	local_irq_enable();
+	handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
+	return;
+#endif
+
+gp_in_kernel:
+	if (fixup_exception(regs))
+		return;
+
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 13;
+	if (notify_die(DIE_GPF, "general protection fault", regs,
+				error_code, 13, SIGSEGV) == NOTIFY_STOP)
+		return;
+	die("general protection fault", regs, error_code);
+}
+
+static notrace __kprobes void
+mem_parity_error(unsigned char reason, struct pt_regs *regs)
+{
+	printk(KERN_EMERG
+		"Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
+			reason, smp_processor_id());
+
+	printk(KERN_EMERG
+		"You have some hardware problem, likely on the PCI bus.\n");
+
+#if defined(CONFIG_EDAC)
+	if (edac_handler_set()) {
+		edac_atomic_assert_error();
+		return;
+	}
+#endif
+
+	if (panic_on_unrecovered_nmi)
+		panic("NMI: Not continuing");
+
+	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
+
+	/* Clear and disable the memory parity error line. */
+	reason = (reason & 0xf) | 4;
+	outb(reason, 0x61);
+}
+
+static notrace __kprobes void
+io_check_error(unsigned char reason, struct pt_regs *regs)
+{
+	unsigned long i;
+
+	printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
+	show_registers(regs);
+
+	/* Re-enable the IOCK line, wait for a few seconds */
+	reason = (reason & 0xf) | 8;
+	outb(reason, 0x61);
+
+	i = 2000;
+	while (--i)
+		udelay(1000);
+
+	reason &= ~8;
+	outb(reason, 0x61);
+}
+
+static notrace __kprobes void
+unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
+{
+	if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) ==
+			NOTIFY_STOP)
+		return;
+#ifdef CONFIG_MCA
+	/*
+	 * Might actually be able to figure out what the guilty party
+	 * is:
+	 */
+	if (MCA_bus) {
+		mca_handle_nmi();
+		return;
+	}
+#endif
+	printk(KERN_EMERG
+		"Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
+			reason, smp_processor_id());
+
+	printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
+	if (panic_on_unrecovered_nmi)
+		panic("NMI: Not continuing");
+
+	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
+}
+
+static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
+{
+	unsigned char reason = 0;
+	int cpu;
+
+	cpu = smp_processor_id();
+
+	/* Only the BSP gets external NMIs from the system. */
+	if (!cpu)
+		reason = get_nmi_reason();
+
+	if (!(reason & 0xc0)) {
+		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
+								== NOTIFY_STOP)
+			return;
+#ifdef CONFIG_X86_LOCAL_APIC
+		/*
+		 * Ok, so this is none of the documented NMI sources,
+		 * so it must be the NMI watchdog.
+		 */
+		if (nmi_watchdog_tick(regs, reason))
+			return;
+		if (!do_nmi_callback(regs, cpu))
+			unknown_nmi_error(reason, regs);
+#else
+		unknown_nmi_error(reason, regs);
+#endif
+
+		return;
+	}
+	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
+		return;
+
+	/* AK: following checks seem to be broken on modern chipsets. FIXME */
+	if (reason & 0x80)
+		mem_parity_error(reason, regs);
+	if (reason & 0x40)
+		io_check_error(reason, regs);
+#ifdef CONFIG_X86_32
+	/*
+	 * Reassert NMI in case it became active meanwhile
+	 * as it's edge-triggered:
+	 */
+	reassert_nmi();
+#endif
+}
+
+dotraplinkage notrace __kprobes void
+do_nmi(struct pt_regs *regs, long error_code)
+{
+	nmi_enter();
+
+#ifdef CONFIG_X86_32
+	{ int cpu; cpu = smp_processor_id(); ++nmi_count(cpu); }
+#else
+	add_pda(__nmi_count, 1);
+#endif
+
+	if (!ignore_nmis)
+		default_do_nmi(regs);
+
+	nmi_exit();
+}
+
+void stop_nmi(void)
+{
+	acpi_nmi_disable();
+	ignore_nmis++;
+}
+
+void restart_nmi(void)
+{
+	ignore_nmis--;
+	acpi_nmi_enable();
+}
+
+/* May run on IST stack. */
+dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
+{
+#ifdef CONFIG_KPROBES
+	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
+			== NOTIFY_STOP)
+		return;
+#else
+	if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP)
+			== NOTIFY_STOP)
+		return;
+#endif
+
+	preempt_conditional_sti(regs);
+	do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
+	preempt_conditional_cli(regs);
+}
+
+#ifdef CONFIG_X86_64
+/* Help handler running on IST stack to switch back to user stack
+   for scheduling or signal handling. The actual stack switch is done in
+   entry.S */
+asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
+{
+	struct pt_regs *regs = eregs;
+	/* Did already sync */
+	if (eregs == (struct pt_regs *)eregs->sp)
+		;
+	/* Exception from user space */
+	else if (user_mode(eregs))
+		regs = task_pt_regs(current);
+	/* Exception from kernel and interrupts are enabled. Move to
+	   kernel process stack. */
+	else if (eregs->flags & X86_EFLAGS_IF)
+		regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
+	if (eregs != regs)
+		*regs = *eregs;
+	return regs;
+}
+#endif
+
+/*
+ * Our handling of the processor debug registers is non-trivial.
+ * We do not clear them on entry and exit from the kernel. Therefore
+ * it is possible to get a watchpoint trap here from inside the kernel.
+ * However, the code in ./ptrace.c has ensured that the user can
+ * only set watchpoints on userspace addresses. Therefore the in-kernel
+ * watchpoint trap can only occur in code which is reading/writing
+ * from user space. Such code must not hold kernel locks (since it
+ * can equally take a page fault), therefore it is safe to call
+ * force_sig_info even though that claims and releases locks.
+ *
+ * Code in ./signal.c ensures that the debug control register
+ * is restored before we deliver any signal, and therefore that
+ * user code runs with the correct debug control register even though
+ * we clear it here.
+ *
+ * Being careful here means that we don't have to be as careful in a
+ * lot of more complicated places (task switching can be a bit lazy
+ * about restoring all the debug state, and ptrace doesn't have to
+ * find every occurrence of the TF bit that could be saved away even
+ * by user code)
+ *
+ * May run on IST stack.
+ */
+dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
+{
+	struct task_struct *tsk = current;
+	unsigned long condition;
+	int si_code;
+
+	get_debugreg(condition, 6);
+
+	/*
+	 * The processor cleared BTF, so don't mark that we need it set.
+	 */
+	clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
+	tsk->thread.debugctlmsr = 0;
+
+	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
+						SIGTRAP) == NOTIFY_STOP)
+		return;
+
+	/* It's safe to allow irq's after DR6 has been saved */
+	preempt_conditional_sti(regs);
+
+	/* Mask out spurious debug traps due to lazy DR7 setting */
+	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
+		if (!tsk->thread.debugreg7)
+			goto clear_dr7;
+	}
+
+#ifdef CONFIG_X86_32
+	if (regs->flags & X86_VM_MASK)
+		goto debug_vm86;
+#endif
+
+	/* Save debug status register where ptrace can see it */
+	tsk->thread.debugreg6 = condition;
+
+	/*
+	 * Single-stepping through TF: make sure we ignore any events in
+	 * kernel space (but re-enable TF when returning to user mode).
+	 */
+	if (condition & DR_STEP) {
+		if (!user_mode(regs))
+			goto clear_TF_reenable;
+	}
+
+	si_code = get_si_code(condition);
+	/* Ok, finally something we can handle */
+	send_sigtrap(tsk, regs, error_code, si_code);
+
+	/*
+	 * Disable additional traps. They'll be re-enabled when
+	 * the signal is delivered.
+	 */
+clear_dr7:
+	set_debugreg(0, 7);
+	preempt_conditional_cli(regs);
+	return;
+
+#ifdef CONFIG_X86_32
+debug_vm86:
+	handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
+	preempt_conditional_cli(regs);
+	return;
+#endif
+
+clear_TF_reenable:
+	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
+	regs->flags &= ~X86_EFLAGS_TF;
+	preempt_conditional_cli(regs);
+	return;
+}
+
+#ifdef CONFIG_X86_64
+static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
+{
+	if (fixup_exception(regs))
+		return 1;
+
+	notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE);
+	/* Illegal floating point operation in the kernel */
+	current->thread.trap_no = trapnr;
+	die(str, regs, 0);
+	return 0;
+}
+#endif
+
+/*
+ * Note that we play around with the 'TS' bit in an attempt to get
+ * the correct behaviour even in the presence of the asynchronous
+ * IRQ13 behaviour
+ */
+void math_error(void __user *ip)
+{
+	struct task_struct *task;
+	siginfo_t info;
+	unsigned short cwd, swd;
+
+	/*
+	 * Save the info for the exception handler and clear the error.
+	 */
+	task = current;
+	save_init_fpu(task);
+	task->thread.trap_no = 16;
+	task->thread.error_code = 0;
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_code = __SI_FAULT;
+	info.si_addr = ip;
+	/*
+	 * (~cwd & swd) will mask out exceptions that are not set to unmasked
+	 * status.  0x3f is the exception bits in these regs, 0x200 is the
+	 * C1 reg you need in case of a stack fault, 0x040 is the stack
+	 * fault bit.  We should only be taking one exception at a time,
+	 * so if this combination doesn't produce any single exception,
+	 * then we have a bad program that isn't synchronizing its FPU usage
+	 * and it will suffer the consequences since we won't be able to
+	 * fully reproduce the context of the exception
+	 */
+	cwd = get_fpu_cwd(task);
+	swd = get_fpu_swd(task);
+	switch (swd & ~cwd & 0x3f) {
+	case 0x000: /* No unmasked exception */
+#ifdef CONFIG_X86_32
+		return;
+#endif
+	default: /* Multiple exceptions */
+		break;
+	case 0x001: /* Invalid Op */
+		/*
+		 * swd & 0x240 == 0x040: Stack Underflow
+		 * swd & 0x240 == 0x240: Stack Overflow
+		 * User must clear the SF bit (0x40) if set
+		 */
+		info.si_code = FPE_FLTINV;
+		break;
+	case 0x002: /* Denormalize */
+	case 0x010: /* Underflow */
+		info.si_code = FPE_FLTUND;
+		break;
+	case 0x004: /* Zero Divide */
+		info.si_code = FPE_FLTDIV;
+		break;
+	case 0x008: /* Overflow */
+		info.si_code = FPE_FLTOVF;
+		break;
+	case 0x020: /* Precision */
+		info.si_code = FPE_FLTRES;
+		break;
+	}
+	force_sig_info(SIGFPE, &info, task);
+}
+
+dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
+{
+	conditional_sti(regs);
+
+#ifdef CONFIG_X86_32
+	ignore_fpu_irq = 1;
+#else
+	if (!user_mode(regs) &&
+	    kernel_math_error(regs, "kernel x87 math error", 16))
+		return;
+#endif
+
+	math_error((void __user *)regs->ip);
+}
+
+static void simd_math_error(void __user *ip)
+{
+	struct task_struct *task;
+	siginfo_t info;
+	unsigned short mxcsr;
+
+	/*
+	 * Save the info for the exception handler and clear the error.
+	 */
+	task = current;
+	save_init_fpu(task);
+	task->thread.trap_no = 19;
+	task->thread.error_code = 0;
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_code = __SI_FAULT;
+	info.si_addr = ip;
+	/*
+	 * The SIMD FPU exceptions are handled a little differently, as there
+	 * is only a single status/control register.  Thus, to determine which
+	 * unmasked exception was caught we must mask the exception mask bits
+	 * at 0x1f80, and then use these to mask the exception bits at 0x3f.
+	 */
+	mxcsr = get_fpu_mxcsr(task);
+	switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
+	case 0x000:
+	default:
+		break;
+	case 0x001: /* Invalid Op */
+		info.si_code = FPE_FLTINV;
+		break;
+	case 0x002: /* Denormalize */
+	case 0x010: /* Underflow */
+		info.si_code = FPE_FLTUND;
+		break;
+	case 0x004: /* Zero Divide */
+		info.si_code = FPE_FLTDIV;
+		break;
+	case 0x008: /* Overflow */
+		info.si_code = FPE_FLTOVF;
+		break;
+	case 0x020: /* Precision */
+		info.si_code = FPE_FLTRES;
+		break;
+	}
+	force_sig_info(SIGFPE, &info, task);
+}
+
+dotraplinkage void
+do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
+{
+	conditional_sti(regs);
+
+#ifdef CONFIG_X86_32
+	if (cpu_has_xmm) {
+		/* Handle SIMD FPU exceptions on PIII+ processors. */
+		ignore_fpu_irq = 1;
+		simd_math_error((void __user *)regs->ip);
+		return;
+	}
+	/*
+	 * Handle strange cache flush from user space exception
+	 * in all other cases.  This is undocumented behaviour.
+	 */
+	if (regs->flags & X86_VM_MASK) {
+		handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code);
+		return;
+	}
+	current->thread.trap_no = 19;
+	current->thread.error_code = error_code;
+	die_if_kernel("cache flush denied", regs, error_code);
+	force_sig(SIGSEGV, current);
+#else
+	if (!user_mode(regs) &&
+			kernel_math_error(regs, "kernel simd math error", 19))
+		return;
+	simd_math_error((void __user *)regs->ip);
+#endif
+}
+
+dotraplinkage void
+do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
+{
+	conditional_sti(regs);
+#if 0
+	/* No need to warn about this any longer. */
+	printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
+#endif
+}
+
+#ifdef CONFIG_X86_32
+unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
+{
+	struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id());
+	unsigned long base = (kesp - uesp) & -THREAD_SIZE;
+	unsigned long new_kesp = kesp - base;
+	unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
+	__u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS];
+
+	/* Set up base for espfix segment */
+	desc &= 0x00f0ff0000000000ULL;
+	desc |=	((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
+		((((__u64)base) << 32) & 0xff00000000000000ULL) |
+		((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) |
+		(lim_pages & 0xffff);
+	*(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc;
+
+	return new_kesp;
+}
+#else
+asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
+{
+}
+
+asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
+{
+}
+#endif
+
+/*
+ * 'math_state_restore()' saves the current math information in the
+ * old math state array, and gets the new ones from the current task
+ *
+ * Careful.. There are problems with IBM-designed IRQ13 behaviour.
+ * Don't touch unless you *really* know how it works.
+ *
+ * Must be called with kernel preemption disabled (in this case,
+ * local interrupts are disabled at the call-site in entry.S).
+ */
+asmlinkage void math_state_restore(void)
+{
+	struct thread_info *thread = current_thread_info();
+	struct task_struct *tsk = thread->task;
+
+	if (!tsk_used_math(tsk)) {
+		local_irq_enable();
+		/*
+		 * does a slab alloc which can sleep
+		 */
+		if (init_fpu(tsk)) {
+			/*
+			 * ran out of memory!
+			 */
+			do_group_exit(SIGKILL);
+			return;
+		}
+		local_irq_disable();
+	}
+
+	clts();				/* Allow maths ops (or we recurse) */
+#ifdef CONFIG_X86_32
+	restore_fpu(tsk);
+#else
+	/*
+	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+	 */
+	if (unlikely(restore_fpu_checking(tsk))) {
+		stts();
+		force_sig(SIGSEGV, tsk);
+		return;
+	}
+#endif
+	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
+	tsk->fpu_counter++;
+}
+EXPORT_SYMBOL_GPL(math_state_restore);
+
+#ifndef CONFIG_MATH_EMULATION
+asmlinkage void math_emulate(long arg)
+{
+	printk(KERN_EMERG
+		"math-emulation not enabled and no coprocessor found.\n");
+	printk(KERN_EMERG "killing %s.\n", current->comm);
+	force_sig(SIGFPE, current);
+	schedule();
+}
+#endif /* CONFIG_MATH_EMULATION */
+
+dotraplinkage void __kprobes
+do_device_not_available(struct pt_regs *regs, long error)
+{
+#ifdef CONFIG_X86_32
+	if (read_cr0() & X86_CR0_EM) {
+		conditional_sti(regs);
+		math_emulate(0);
+	} else {
+		math_state_restore(); /* interrupts still off */
+		conditional_sti(regs);
+	}
+#else
+	math_state_restore();
+#endif
+}
+
+#ifdef CONFIG_X86_32
+dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
+{
+	siginfo_t info;
+	local_irq_enable();
+
+	info.si_signo = SIGILL;
+	info.si_errno = 0;
+	info.si_code = ILL_BADSTK;
+	info.si_addr = 0;
+	if (notify_die(DIE_TRAP, "iret exception",
+			regs, error_code, 32, SIGILL) == NOTIFY_STOP)
+		return;
+	do_trap(32, SIGILL, "iret exception", regs, error_code, &info);
+}
+#endif
+
+void __init trap_init(void)
+{
+#ifdef CONFIG_X86_32
+	int i;
+#endif
+
+#ifdef CONFIG_EISA
+	void __iomem *p = early_ioremap(0x0FFFD9, 4);
+
+	if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
+		EISA_bus = 1;
+	early_iounmap(p, 4);
+#endif
+
+	set_intr_gate(0, &divide_error);
+	set_intr_gate_ist(1, &debug, DEBUG_STACK);
+	set_intr_gate_ist(2, &nmi, NMI_STACK);
+	/* int3 can be called from all */
+	set_system_intr_gate_ist(3, &int3, DEBUG_STACK);
+	/* int4 can be called from all */
+	set_system_intr_gate(4, &overflow);
+	set_intr_gate(5, &bounds);
+	set_intr_gate(6, &invalid_op);
+	set_intr_gate(7, &device_not_available);
+#ifdef CONFIG_X86_32
+	set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
+#else
+	set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK);
+#endif
+	set_intr_gate(9, &coprocessor_segment_overrun);
+	set_intr_gate(10, &invalid_TSS);
+	set_intr_gate(11, &segment_not_present);
+	set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
+	set_intr_gate(13, &general_protection);
+	set_intr_gate(14, &page_fault);
+	set_intr_gate(15, &spurious_interrupt_bug);
+	set_intr_gate(16, &coprocessor_error);
+	set_intr_gate(17, &alignment_check);
+#ifdef CONFIG_X86_MCE
+	set_intr_gate_ist(18, &machine_check, MCE_STACK);
+#endif
+	set_intr_gate(19, &simd_coprocessor_error);
+
+#ifdef CONFIG_IA32_EMULATION
+	set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
+#endif
+
+#ifdef CONFIG_X86_32
+	if (cpu_has_fxsr) {
+		printk(KERN_INFO "Enabling fast FPU save and restore... ");
+		set_in_cr4(X86_CR4_OSFXSR);
+		printk("done.\n");
+	}
+	if (cpu_has_xmm) {
+		printk(KERN_INFO
+			"Enabling unmasked SIMD FPU exception support... ");
+		set_in_cr4(X86_CR4_OSXMMEXCPT);
+		printk("done.\n");
+	}
+
+	set_system_trap_gate(SYSCALL_VECTOR, &system_call);
+
+	/* Reserve all the builtin and the syscall vector: */
+	for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
+		set_bit(i, used_vectors);
+
+	set_bit(SYSCALL_VECTOR, used_vectors);
+#endif
+	/*
+	 * Should be a barrier for any external CPU state:
+	 */
+	cpu_init();
+
+#ifdef CONFIG_X86_32
+	trap_init_hook();
+#endif
+}
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
deleted file mode 100644
index 03df8e4..0000000
--- a/arch/x86/kernel/traps_32.c
+++ /dev/null
@@ -1,1256 +0,0 @@
-/*
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
- *
- *  Pentium III FXSR, SSE support
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- */
-
-/*
- * 'Traps.c' handles hardware traps and faults after we have saved some
- * state in 'asm.s'.
- */
-#include <linux/interrupt.h>
-#include <linux/kallsyms.h>
-#include <linux/spinlock.h>
-#include <linux/highmem.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/utsname.h>
-#include <linux/kdebug.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/unwind.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/kexec.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-#include <linux/nmi.h>
-#include <linux/mm.h>
-
-#ifdef CONFIG_EISA
-#include <linux/ioport.h>
-#include <linux/eisa.h>
-#endif
-
-#ifdef CONFIG_MCA
-#include <linux/mca.h>
-#endif
-
-#if defined(CONFIG_EDAC)
-#include <linux/edac.h>
-#endif
-
-#include <asm/arch_hooks.h>
-#include <asm/stacktrace.h>
-#include <asm/processor.h>
-#include <asm/debugreg.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/unwind.h>
-#include <asm/desc.h>
-#include <asm/i387.h>
-#include <asm/nmi.h>
-#include <asm/smp.h>
-#include <asm/io.h>
-#include <asm/traps.h>
-
-#include "mach_traps.h"
-
-DECLARE_BITMAP(used_vectors, NR_VECTORS);
-EXPORT_SYMBOL_GPL(used_vectors);
-
-asmlinkage int system_call(void);
-
-/* Do we ignore FPU interrupts ? */
-char ignore_fpu_irq;
-
-/*
- * The IDT has to be page-aligned to simplify the Pentium
- * F0 0F bug workaround.. We have a special link segment
- * for this.
- */
-gate_desc idt_table[256]
-	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
-
-int panic_on_unrecovered_nmi;
-int kstack_depth_to_print = 24;
-static unsigned int code_bytes = 64;
-static int ignore_nmis;
-static int die_counter;
-
-void printk_address(unsigned long address, int reliable)
-{
-#ifdef CONFIG_KALLSYMS
-	unsigned long offset = 0;
-	unsigned long symsize;
-	const char *symname;
-	char *modname;
-	char *delim = ":";
-	char namebuf[KSYM_NAME_LEN];
-	char reliab[4] = "";
-
-	symname = kallsyms_lookup(address, &symsize, &offset,
-					&modname, namebuf);
-	if (!symname) {
-		printk(" [<%08lx>]\n", address);
-		return;
-	}
-	if (!reliable)
-		strcpy(reliab, "? ");
-
-	if (!modname)
-		modname = delim = "";
-	printk(" [<%08lx>] %s%s%s%s%s+0x%lx/0x%lx\n",
-		address, reliab, delim, modname, delim, symname, offset, symsize);
-#else
-	printk(" [<%08lx>]\n", address);
-#endif
-}
-
-static inline int valid_stack_ptr(struct thread_info *tinfo,
-			void *p, unsigned int size)
-{
-	void *t = tinfo;
-	return	p > t && p <= t + THREAD_SIZE - size;
-}
-
-/* The form of the top of the frame on the stack */
-struct stack_frame {
-	struct stack_frame *next_frame;
-	unsigned long return_address;
-};
-
-static inline unsigned long
-print_context_stack(struct thread_info *tinfo,
-		unsigned long *stack, unsigned long bp,
-		const struct stacktrace_ops *ops, void *data)
-{
-	struct stack_frame *frame = (struct stack_frame *)bp;
-
-	while (valid_stack_ptr(tinfo, stack, sizeof(*stack))) {
-		unsigned long addr;
-
-		addr = *stack;
-		if (__kernel_text_address(addr)) {
-			if ((unsigned long) stack == bp + 4) {
-				ops->address(data, addr, 1);
-				frame = frame->next_frame;
-				bp = (unsigned long) frame;
-			} else {
-				ops->address(data, addr, bp == 0);
-			}
-		}
-		stack++;
-	}
-	return bp;
-}
-
-void dump_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp,
-		const struct stacktrace_ops *ops, void *data)
-{
-	if (!task)
-		task = current;
-
-	if (!stack) {
-		unsigned long dummy;
-		stack = &dummy;
-		if (task != current)
-			stack = (unsigned long *)task->thread.sp;
-	}
-
-#ifdef CONFIG_FRAME_POINTER
-	if (!bp) {
-		if (task == current) {
-			/* Grab bp right from our regs */
-			asm("movl %%ebp, %0" : "=r" (bp) :);
-		} else {
-			/* bp is the last reg pushed by switch_to */
-			bp = *(unsigned long *) task->thread.sp;
-		}
-	}
-#endif
-
-	for (;;) {
-		struct thread_info *context;
-
-		context = (struct thread_info *)
-			((unsigned long)stack & (~(THREAD_SIZE - 1)));
-		bp = print_context_stack(context, stack, bp, ops, data);
-		/*
-		 * Should be after the line below, but somewhere
-		 * in early boot context comes out corrupted and we
-		 * can't reference it:
-		 */
-		if (ops->stack(data, "IRQ") < 0)
-			break;
-		stack = (unsigned long *)context->previous_esp;
-		if (!stack)
-			break;
-		touch_nmi_watchdog();
-	}
-}
-EXPORT_SYMBOL(dump_trace);
-
-static void
-print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
-	printk(data);
-	print_symbol(msg, symbol);
-	printk("\n");
-}
-
-static void print_trace_warning(void *data, char *msg)
-{
-	printk("%s%s\n", (char *)data, msg);
-}
-
-static int print_trace_stack(void *data, char *name)
-{
-	return 0;
-}
-
-/*
- * Print one address/symbol entries per line.
- */
-static void print_trace_address(void *data, unsigned long addr, int reliable)
-{
-	printk("%s [<%08lx>] ", (char *)data, addr);
-	if (!reliable)
-		printk("? ");
-	print_symbol("%s\n", addr);
-	touch_nmi_watchdog();
-}
-
-static const struct stacktrace_ops print_trace_ops = {
-	.warning = print_trace_warning,
-	.warning_symbol = print_trace_warning_symbol,
-	.stack = print_trace_stack,
-	.address = print_trace_address,
-};
-
-static void
-show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp, char *log_lvl)
-{
-	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
-	printk("%s =======================\n", log_lvl);
-}
-
-void show_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp)
-{
-	show_trace_log_lvl(task, regs, stack, bp, "");
-}
-
-static void
-show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		   unsigned long *sp, unsigned long bp, char *log_lvl)
-{
-	unsigned long *stack;
-	int i;
-
-	if (sp == NULL) {
-		if (task)
-			sp = (unsigned long *)task->thread.sp;
-		else
-			sp = (unsigned long *)&sp;
-	}
-
-	stack = sp;
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (kstack_end(stack))
-			break;
-		if (i && ((i % 8) == 0))
-			printk("\n%s       ", log_lvl);
-		printk("%08lx ", *stack++);
-	}
-	printk("\n%sCall Trace:\n", log_lvl);
-
-	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
-}
-
-void show_stack(struct task_struct *task, unsigned long *sp)
-{
-	printk("       ");
-	show_stack_log_lvl(task, NULL, sp, 0, "");
-}
-
-/*
- * The architecture-independent dump_stack generator
- */
-void dump_stack(void)
-{
-	unsigned long bp = 0;
-	unsigned long stack;
-
-#ifdef CONFIG_FRAME_POINTER
-	if (!bp)
-		asm("movl %%ebp, %0" : "=r" (bp):);
-#endif
-
-	printk("Pid: %d, comm: %.20s %s %s %.*s\n",
-		current->pid, current->comm, print_tainted(),
-		init_utsname()->release,
-		(int)strcspn(init_utsname()->version, " "),
-		init_utsname()->version);
-
-	show_trace(current, NULL, &stack, bp);
-}
-
-EXPORT_SYMBOL(dump_stack);
-
-void show_registers(struct pt_regs *regs)
-{
-	int i;
-
-	print_modules();
-	__show_registers(regs, 0);
-
-	printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)",
-		TASK_COMM_LEN, current->comm, task_pid_nr(current),
-		current_thread_info(), current, task_thread_info(current));
-	/*
-	 * When in-kernel, we also print out the stack and code at the
-	 * time of the fault..
-	 */
-	if (!user_mode_vm(regs)) {
-		unsigned int code_prologue = code_bytes * 43 / 64;
-		unsigned int code_len = code_bytes;
-		unsigned char c;
-		u8 *ip;
-
-		printk("\n" KERN_EMERG "Stack: ");
-		show_stack_log_lvl(NULL, regs, &regs->sp, 0, KERN_EMERG);
-
-		printk(KERN_EMERG "Code: ");
-
-		ip = (u8 *)regs->ip - code_prologue;
-		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
-			/* try starting at EIP */
-			ip = (u8 *)regs->ip;
-			code_len = code_len - code_prologue + 1;
-		}
-		for (i = 0; i < code_len; i++, ip++) {
-			if (ip < (u8 *)PAGE_OFFSET ||
-					probe_kernel_address(ip, c)) {
-				printk(" Bad EIP value.");
-				break;
-			}
-			if (ip == (u8 *)regs->ip)
-				printk("<%02x> ", c);
-			else
-				printk("%02x ", c);
-		}
-	}
-	printk("\n");
-}
-
-int is_valid_bugaddr(unsigned long ip)
-{
-	unsigned short ud2;
-
-	if (ip < PAGE_OFFSET)
-		return 0;
-	if (probe_kernel_address((unsigned short *)ip, ud2))
-		return 0;
-
-	return ud2 == 0x0b0f;
-}
-
-static raw_spinlock_t die_lock = __RAW_SPIN_LOCK_UNLOCKED;
-static int die_owner = -1;
-static unsigned int die_nest_count;
-
-unsigned __kprobes long oops_begin(void)
-{
-	unsigned long flags;
-
-	oops_enter();
-
-	if (die_owner != raw_smp_processor_id()) {
-		console_verbose();
-		raw_local_irq_save(flags);
-		__raw_spin_lock(&die_lock);
-		die_owner = smp_processor_id();
-		die_nest_count = 0;
-		bust_spinlocks(1);
-	} else {
-		raw_local_irq_save(flags);
-	}
-	die_nest_count++;
-	return flags;
-}
-
-void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
-{
-	bust_spinlocks(0);
-	die_owner = -1;
-	add_taint(TAINT_DIE);
-	__raw_spin_unlock(&die_lock);
-	raw_local_irq_restore(flags);
-
-	if (!regs)
-		return;
-
-	if (kexec_should_crash(current))
-		crash_kexec(regs);
-
-	if (in_interrupt())
-		panic("Fatal exception in interrupt");
-
-	if (panic_on_oops)
-		panic("Fatal exception");
-
-	oops_exit();
-	do_exit(signr);
-}
-
-int __kprobes __die(const char *str, struct pt_regs *regs, long err)
-{
-	unsigned short ss;
-	unsigned long sp;
-
-	printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
-#ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
-#endif
-#ifdef CONFIG_SMP
-	printk("SMP ");
-#endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	printk("DEBUG_PAGEALLOC");
-#endif
-	printk("\n");
-	if (notify_die(DIE_OOPS, str, regs, err,
-			current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
-		return 1;
-
-	show_registers(regs);
-	/* Executive summary in case the oops scrolled away */
-	sp = (unsigned long) (&regs->sp);
-	savesegment(ss, ss);
-	if (user_mode(regs)) {
-		sp = regs->sp;
-		ss = regs->ss & 0xffff;
-	}
-	printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip);
-	print_symbol("%s", regs->ip);
-	printk(" SS:ESP %04x:%08lx\n", ss, sp);
-	return 0;
-}
-
-/*
- * This is gone through when something in the kernel has done something bad
- * and is about to be terminated:
- */
-void die(const char *str, struct pt_regs *regs, long err)
-{
-	unsigned long flags = oops_begin();
-
-	if (die_nest_count < 3) {
-		report_bug(regs->ip, regs);
-
-		if (__die(str, regs, err))
-			regs = NULL;
-	} else {
-		printk(KERN_EMERG "Recursive die() failure, output suppressed\n");
-	}
-
-	oops_end(flags, regs, SIGSEGV);
-}
-
-static inline void
-die_if_kernel(const char *str, struct pt_regs *regs, long err)
-{
-	if (!user_mode_vm(regs))
-		die(str, regs, err);
-}
-
-static void __kprobes
-do_trap(int trapnr, int signr, char *str, int vm86, struct pt_regs *regs,
-	long error_code, siginfo_t *info)
-{
-	struct task_struct *tsk = current;
-
-	if (regs->flags & X86_VM_MASK) {
-		if (vm86)
-			goto vm86_trap;
-		goto trap_signal;
-	}
-
-	if (!user_mode(regs))
-		goto kernel_trap;
-
-trap_signal:
-	/*
-	 * We want error_code and trap_no set for userspace faults and
-	 * kernelspace faults which result in die(), but not
-	 * kernelspace faults which are fixed up.  die() gives the
-	 * process no chance to handle the signal and notice the
-	 * kernel fault information, so that won't result in polluting
-	 * the information about previously queued, but not yet
-	 * delivered, faults.  See also do_general_protection below.
-	 */
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = trapnr;
-
-	if (info)
-		force_sig_info(signr, info, tsk);
-	else
-		force_sig(signr, tsk);
-	return;
-
-kernel_trap:
-	if (!fixup_exception(regs)) {
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = trapnr;
-		die(str, regs, error_code);
-	}
-	return;
-
-vm86_trap:
-	if (handle_vm86_trap((struct kernel_vm86_regs *) regs,
-						error_code, trapnr))
-		goto trap_signal;
-	return;
-}
-
-#define DO_ERROR(trapnr, signr, str, name)				\
-void do_##name(struct pt_regs *regs, long error_code)			\
-{									\
-	trace_hardirqs_fixup();						\
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-							== NOTIFY_STOP)	\
-		return;							\
-	do_trap(trapnr, signr, str, 0, regs, error_code, NULL);		\
-}
-
-#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr, irq)	\
-void do_##name(struct pt_regs *regs, long error_code)			\
-{									\
-	siginfo_t info;							\
-	if (irq)							\
-		local_irq_enable();					\
-	info.si_signo = signr;						\
-	info.si_errno = 0;						\
-	info.si_code = sicode;						\
-	info.si_addr = (void __user *)siaddr;				\
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-							== NOTIFY_STOP)	\
-		return;							\
-	do_trap(trapnr, signr, str, 0, regs, error_code, &info);	\
-}
-
-#define DO_VM86_ERROR(trapnr, signr, str, name)				\
-void do_##name(struct pt_regs *regs, long error_code)			\
-{									\
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-							== NOTIFY_STOP)	\
-		return;							\
-	do_trap(trapnr, signr, str, 1, regs, error_code, NULL);		\
-}
-
-#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)	\
-void do_##name(struct pt_regs *regs, long error_code)			\
-{									\
-	siginfo_t info;							\
-	info.si_signo = signr;						\
-	info.si_errno = 0;						\
-	info.si_code = sicode;						\
-	info.si_addr = (void __user *)siaddr;				\
-	trace_hardirqs_fixup();						\
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-							== NOTIFY_STOP)	\
-		return;							\
-	do_trap(trapnr, signr, str, 1, regs, error_code, &info);	\
-}
-
-DO_VM86_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
-#ifndef CONFIG_KPROBES
-DO_VM86_ERROR(3, SIGTRAP, "int3", int3)
-#endif
-DO_VM86_ERROR(4, SIGSEGV, "overflow", overflow)
-DO_VM86_ERROR(5, SIGSEGV, "bounds", bounds)
-DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0)
-DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
-DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
-DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
-DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
-DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0, 0)
-DO_ERROR_INFO(32, SIGILL, "iret exception", iret_error, ILL_BADSTK, 0, 1)
-
-void __kprobes
-do_general_protection(struct pt_regs *regs, long error_code)
-{
-	struct task_struct *tsk;
-	struct thread_struct *thread;
-	struct tss_struct *tss;
-	int cpu;
-
-	cpu = get_cpu();
-	tss = &per_cpu(init_tss, cpu);
-	thread = &current->thread;
-
-	/*
-	 * Perform the lazy TSS's I/O bitmap copy. If the TSS has an
-	 * invalid offset set (the LAZY one) and the faulting thread has
-	 * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS
-	 * and we set the offset field correctly. Then we let the CPU to
-	 * restart the faulting instruction.
-	 */
-	if (tss->x86_tss.io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY &&
-	    thread->io_bitmap_ptr) {
-		memcpy(tss->io_bitmap, thread->io_bitmap_ptr,
-		       thread->io_bitmap_max);
-		/*
-		 * If the previously set map was extending to higher ports
-		 * than the current one, pad extra space with 0xff (no access).
-		 */
-		if (thread->io_bitmap_max < tss->io_bitmap_max) {
-			memset((char *) tss->io_bitmap +
-				thread->io_bitmap_max, 0xff,
-				tss->io_bitmap_max - thread->io_bitmap_max);
-		}
-		tss->io_bitmap_max = thread->io_bitmap_max;
-		tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
-		tss->io_bitmap_owner = thread;
-		put_cpu();
-
-		return;
-	}
-	put_cpu();
-
-	if (regs->flags & X86_VM_MASK)
-		goto gp_in_vm86;
-
-	tsk = current;
-	if (!user_mode(regs))
-		goto gp_in_kernel;
-
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = 13;
-
-	if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
-			printk_ratelimit()) {
-		printk(KERN_INFO
-			"%s[%d] general protection ip:%lx sp:%lx error:%lx",
-			tsk->comm, task_pid_nr(tsk),
-			regs->ip, regs->sp, error_code);
-		print_vma_addr(" in ", regs->ip);
-		printk("\n");
-	}
-
-	force_sig(SIGSEGV, tsk);
-	return;
-
-gp_in_vm86:
-	local_irq_enable();
-	handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
-	return;
-
-gp_in_kernel:
-	if (fixup_exception(regs))
-		return;
-
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = 13;
-	if (notify_die(DIE_GPF, "general protection fault", regs,
-				error_code, 13, SIGSEGV) == NOTIFY_STOP)
-		return;
-	die("general protection fault", regs, error_code);
-}
-
-static notrace __kprobes void
-mem_parity_error(unsigned char reason, struct pt_regs *regs)
-{
-	printk(KERN_EMERG
-		"Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
-			reason, smp_processor_id());
-
-	printk(KERN_EMERG
-		"You have some hardware problem, likely on the PCI bus.\n");
-
-#if defined(CONFIG_EDAC)
-	if (edac_handler_set()) {
-		edac_atomic_assert_error();
-		return;
-	}
-#endif
-
-	if (panic_on_unrecovered_nmi)
-		panic("NMI: Not continuing");
-
-	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
-
-	/* Clear and disable the memory parity error line. */
-	clear_mem_error(reason);
-}
-
-static notrace __kprobes void
-io_check_error(unsigned char reason, struct pt_regs *regs)
-{
-	unsigned long i;
-
-	printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
-	show_registers(regs);
-
-	/* Re-enable the IOCK line, wait for a few seconds */
-	reason = (reason & 0xf) | 8;
-	outb(reason, 0x61);
-
-	i = 2000;
-	while (--i)
-		udelay(1000);
-
-	reason &= ~8;
-	outb(reason, 0x61);
-}
-
-static notrace __kprobes void
-unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
-{
-	if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
-		return;
-#ifdef CONFIG_MCA
-	/*
-	 * Might actually be able to figure out what the guilty party
-	 * is:
-	 */
-	if (MCA_bus) {
-		mca_handle_nmi();
-		return;
-	}
-#endif
-	printk(KERN_EMERG
-		"Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
-			reason, smp_processor_id());
-
-	printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
-	if (panic_on_unrecovered_nmi)
-		panic("NMI: Not continuing");
-
-	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
-}
-
-static DEFINE_SPINLOCK(nmi_print_lock);
-
-void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic)
-{
-	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
-		return;
-
-	spin_lock(&nmi_print_lock);
-	/*
-	* We are in trouble anyway, lets at least try
-	* to get a message out:
-	*/
-	bust_spinlocks(1);
-	printk(KERN_EMERG "%s", str);
-	printk(" on CPU%d, ip %08lx, registers:\n",
-		smp_processor_id(), regs->ip);
-	show_registers(regs);
-	if (do_panic)
-		panic("Non maskable interrupt");
-	console_silent();
-	spin_unlock(&nmi_print_lock);
-	bust_spinlocks(0);
-
-	/*
-	 * If we are in kernel we are probably nested up pretty bad
-	 * and might aswell get out now while we still can:
-	 */
-	if (!user_mode_vm(regs)) {
-		current->thread.trap_no = 2;
-		crash_kexec(regs);
-	}
-
-	do_exit(SIGSEGV);
-}
-
-static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
-{
-	unsigned char reason = 0;
-	int cpu;
-
-	cpu = smp_processor_id();
-
-	/* Only the BSP gets external NMIs from the system. */
-	if (!cpu)
-		reason = get_nmi_reason();
-
-	if (!(reason & 0xc0)) {
-		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
-								== NOTIFY_STOP)
-			return;
-#ifdef CONFIG_X86_LOCAL_APIC
-		/*
-		 * Ok, so this is none of the documented NMI sources,
-		 * so it must be the NMI watchdog.
-		 */
-		if (nmi_watchdog_tick(regs, reason))
-			return;
-		if (!do_nmi_callback(regs, cpu))
-			unknown_nmi_error(reason, regs);
-#else
-		unknown_nmi_error(reason, regs);
-#endif
-
-		return;
-	}
-	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
-		return;
-
-	/* AK: following checks seem to be broken on modern chipsets. FIXME */
-	if (reason & 0x80)
-		mem_parity_error(reason, regs);
-	if (reason & 0x40)
-		io_check_error(reason, regs);
-	/*
-	 * Reassert NMI in case it became active meanwhile
-	 * as it's edge-triggered:
-	 */
-	reassert_nmi();
-}
-
-notrace __kprobes void do_nmi(struct pt_regs *regs, long error_code)
-{
-	int cpu;
-
-	nmi_enter();
-
-	cpu = smp_processor_id();
-
-	++nmi_count(cpu);
-
-	if (!ignore_nmis)
-		default_do_nmi(regs);
-
-	nmi_exit();
-}
-
-void stop_nmi(void)
-{
-	acpi_nmi_disable();
-	ignore_nmis++;
-}
-
-void restart_nmi(void)
-{
-	ignore_nmis--;
-	acpi_nmi_enable();
-}
-
-#ifdef CONFIG_KPROBES
-void __kprobes do_int3(struct pt_regs *regs, long error_code)
-{
-	trace_hardirqs_fixup();
-
-	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
-			== NOTIFY_STOP)
-		return;
-	/*
-	 * This is an interrupt gate, because kprobes wants interrupts
-	 * disabled. Normal trap handlers don't.
-	 */
-	restore_interrupts(regs);
-
-	do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL);
-}
-#endif
-
-/*
- * Our handling of the processor debug registers is non-trivial.
- * We do not clear them on entry and exit from the kernel. Therefore
- * it is possible to get a watchpoint trap here from inside the kernel.
- * However, the code in ./ptrace.c has ensured that the user can
- * only set watchpoints on userspace addresses. Therefore the in-kernel
- * watchpoint trap can only occur in code which is reading/writing
- * from user space. Such code must not hold kernel locks (since it
- * can equally take a page fault), therefore it is safe to call
- * force_sig_info even though that claims and releases locks.
- *
- * Code in ./signal.c ensures that the debug control register
- * is restored before we deliver any signal, and therefore that
- * user code runs with the correct debug control register even though
- * we clear it here.
- *
- * Being careful here means that we don't have to be as careful in a
- * lot of more complicated places (task switching can be a bit lazy
- * about restoring all the debug state, and ptrace doesn't have to
- * find every occurrence of the TF bit that could be saved away even
- * by user code)
- */
-void __kprobes do_debug(struct pt_regs *regs, long error_code)
-{
-	struct task_struct *tsk = current;
-	unsigned int condition;
-
-	trace_hardirqs_fixup();
-
-	get_debugreg(condition, 6);
-
-	/*
-	 * The processor cleared BTF, so don't mark that we need it set.
-	 */
-	clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
-	tsk->thread.debugctlmsr = 0;
-
-	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
-						SIGTRAP) == NOTIFY_STOP)
-		return;
-	/* It's safe to allow irq's after DR6 has been saved */
-	if (regs->flags & X86_EFLAGS_IF)
-		local_irq_enable();
-
-	/* Mask out spurious debug traps due to lazy DR7 setting */
-	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
-		if (!tsk->thread.debugreg7)
-			goto clear_dr7;
-	}
-
-	if (regs->flags & X86_VM_MASK)
-		goto debug_vm86;
-
-	/* Save debug status register where ptrace can see it */
-	tsk->thread.debugreg6 = condition;
-
-	/*
-	 * Single-stepping through TF: make sure we ignore any events in
-	 * kernel space (but re-enable TF when returning to user mode).
-	 */
-	if (condition & DR_STEP) {
-		/*
-		 * We already checked v86 mode above, so we can
-		 * check for kernel mode by just checking the CPL
-		 * of CS.
-		 */
-		if (!user_mode(regs))
-			goto clear_TF_reenable;
-	}
-
-	/* Ok, finally something we can handle */
-	send_sigtrap(tsk, regs, error_code);
-
-	/*
-	 * Disable additional traps. They'll be re-enabled when
-	 * the signal is delivered.
-	 */
-clear_dr7:
-	set_debugreg(0, 7);
-	return;
-
-debug_vm86:
-	handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
-	return;
-
-clear_TF_reenable:
-	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
-	regs->flags &= ~X86_EFLAGS_TF;
-	return;
-}
-
-/*
- * Note that we play around with the 'TS' bit in an attempt to get
- * the correct behaviour even in the presence of the asynchronous
- * IRQ13 behaviour
- */
-void math_error(void __user *ip)
-{
-	struct task_struct *task;
-	siginfo_t info;
-	unsigned short cwd, swd;
-
-	/*
-	 * Save the info for the exception handler and clear the error.
-	 */
-	task = current;
-	save_init_fpu(task);
-	task->thread.trap_no = 16;
-	task->thread.error_code = 0;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_code = __SI_FAULT;
-	info.si_addr = ip;
-	/*
-	 * (~cwd & swd) will mask out exceptions that are not set to unmasked
-	 * status.  0x3f is the exception bits in these regs, 0x200 is the
-	 * C1 reg you need in case of a stack fault, 0x040 is the stack
-	 * fault bit.  We should only be taking one exception at a time,
-	 * so if this combination doesn't produce any single exception,
-	 * then we have a bad program that isn't synchronizing its FPU usage
-	 * and it will suffer the consequences since we won't be able to
-	 * fully reproduce the context of the exception
-	 */
-	cwd = get_fpu_cwd(task);
-	swd = get_fpu_swd(task);
-	switch (swd & ~cwd & 0x3f) {
-	case 0x000: /* No unmasked exception */
-		return;
-	default: /* Multiple exceptions */
-		break;
-	case 0x001: /* Invalid Op */
-		/*
-		 * swd & 0x240 == 0x040: Stack Underflow
-		 * swd & 0x240 == 0x240: Stack Overflow
-		 * User must clear the SF bit (0x40) if set
-		 */
-		info.si_code = FPE_FLTINV;
-		break;
-	case 0x002: /* Denormalize */
-	case 0x010: /* Underflow */
-		info.si_code = FPE_FLTUND;
-		break;
-	case 0x004: /* Zero Divide */
-		info.si_code = FPE_FLTDIV;
-		break;
-	case 0x008: /* Overflow */
-		info.si_code = FPE_FLTOVF;
-		break;
-	case 0x020: /* Precision */
-		info.si_code = FPE_FLTRES;
-		break;
-	}
-	force_sig_info(SIGFPE, &info, task);
-}
-
-void do_coprocessor_error(struct pt_regs *regs, long error_code)
-{
-	ignore_fpu_irq = 1;
-	math_error((void __user *)regs->ip);
-}
-
-static void simd_math_error(void __user *ip)
-{
-	struct task_struct *task;
-	siginfo_t info;
-	unsigned short mxcsr;
-
-	/*
-	 * Save the info for the exception handler and clear the error.
-	 */
-	task = current;
-	save_init_fpu(task);
-	task->thread.trap_no = 19;
-	task->thread.error_code = 0;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_code = __SI_FAULT;
-	info.si_addr = ip;
-	/*
-	 * The SIMD FPU exceptions are handled a little differently, as there
-	 * is only a single status/control register.  Thus, to determine which
-	 * unmasked exception was caught we must mask the exception mask bits
-	 * at 0x1f80, and then use these to mask the exception bits at 0x3f.
-	 */
-	mxcsr = get_fpu_mxcsr(task);
-	switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
-	case 0x000:
-	default:
-		break;
-	case 0x001: /* Invalid Op */
-		info.si_code = FPE_FLTINV;
-		break;
-	case 0x002: /* Denormalize */
-	case 0x010: /* Underflow */
-		info.si_code = FPE_FLTUND;
-		break;
-	case 0x004: /* Zero Divide */
-		info.si_code = FPE_FLTDIV;
-		break;
-	case 0x008: /* Overflow */
-		info.si_code = FPE_FLTOVF;
-		break;
-	case 0x020: /* Precision */
-		info.si_code = FPE_FLTRES;
-		break;
-	}
-	force_sig_info(SIGFPE, &info, task);
-}
-
-void do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
-{
-	if (cpu_has_xmm) {
-		/* Handle SIMD FPU exceptions on PIII+ processors. */
-		ignore_fpu_irq = 1;
-		simd_math_error((void __user *)regs->ip);
-		return;
-	}
-	/*
-	 * Handle strange cache flush from user space exception
-	 * in all other cases.  This is undocumented behaviour.
-	 */
-	if (regs->flags & X86_VM_MASK) {
-		handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code);
-		return;
-	}
-	current->thread.trap_no = 19;
-	current->thread.error_code = error_code;
-	die_if_kernel("cache flush denied", regs, error_code);
-	force_sig(SIGSEGV, current);
-}
-
-void do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
-{
-#if 0
-	/* No need to warn about this any longer. */
-	printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
-#endif
-}
-
-unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
-{
-	struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id());
-	unsigned long base = (kesp - uesp) & -THREAD_SIZE;
-	unsigned long new_kesp = kesp - base;
-	unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
-	__u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS];
-
-	/* Set up base for espfix segment */
-	desc &= 0x00f0ff0000000000ULL;
-	desc |=	((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
-		((((__u64)base) << 32) & 0xff00000000000000ULL) |
-		((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) |
-		(lim_pages & 0xffff);
-	*(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc;
-
-	return new_kesp;
-}
-
-/*
- * 'math_state_restore()' saves the current math information in the
- * old math state array, and gets the new ones from the current task
- *
- * Careful.. There are problems with IBM-designed IRQ13 behaviour.
- * Don't touch unless you *really* know how it works.
- *
- * Must be called with kernel preemption disabled (in this case,
- * local interrupts are disabled at the call-site in entry.S).
- */
-asmlinkage void math_state_restore(void)
-{
-	struct thread_info *thread = current_thread_info();
-	struct task_struct *tsk = thread->task;
-
-	if (!tsk_used_math(tsk)) {
-		local_irq_enable();
-		/*
-		 * does a slab alloc which can sleep
-		 */
-		if (init_fpu(tsk)) {
-			/*
-			 * ran out of memory!
-			 */
-			do_group_exit(SIGKILL);
-			return;
-		}
-		local_irq_disable();
-	}
-
-	clts();				/* Allow maths ops (or we recurse) */
-	restore_fpu(tsk);
-	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
-	tsk->fpu_counter++;
-}
-EXPORT_SYMBOL_GPL(math_state_restore);
-
-#ifndef CONFIG_MATH_EMULATION
-
-asmlinkage void math_emulate(long arg)
-{
-	printk(KERN_EMERG
-		"math-emulation not enabled and no coprocessor found.\n");
-	printk(KERN_EMERG "killing %s.\n", current->comm);
-	force_sig(SIGFPE, current);
-	schedule();
-}
-
-#endif /* CONFIG_MATH_EMULATION */
-
-void __init trap_init(void)
-{
-	int i;
-
-#ifdef CONFIG_EISA
-	void __iomem *p = early_ioremap(0x0FFFD9, 4);
-
-	if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
-		EISA_bus = 1;
-	early_iounmap(p, 4);
-#endif
-
-	set_trap_gate(0, &divide_error);
-	set_intr_gate(1, &debug);
-	set_intr_gate(2, &nmi);
-	set_system_intr_gate(3, &int3); /* int3 can be called from all */
-	set_system_gate(4, &overflow); /* int4 can be called from all */
-	set_trap_gate(5, &bounds);
-	set_trap_gate(6, &invalid_op);
-	set_trap_gate(7, &device_not_available);
-	set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
-	set_trap_gate(9, &coprocessor_segment_overrun);
-	set_trap_gate(10, &invalid_TSS);
-	set_trap_gate(11, &segment_not_present);
-	set_trap_gate(12, &stack_segment);
-	set_trap_gate(13, &general_protection);
-	set_intr_gate(14, &page_fault);
-	set_trap_gate(15, &spurious_interrupt_bug);
-	set_trap_gate(16, &coprocessor_error);
-	set_trap_gate(17, &alignment_check);
-#ifdef CONFIG_X86_MCE
-	set_trap_gate(18, &machine_check);
-#endif
-	set_trap_gate(19, &simd_coprocessor_error);
-
-	if (cpu_has_fxsr) {
-		printk(KERN_INFO "Enabling fast FPU save and restore... ");
-		set_in_cr4(X86_CR4_OSFXSR);
-		printk("done.\n");
-	}
-	if (cpu_has_xmm) {
-		printk(KERN_INFO
-			"Enabling unmasked SIMD FPU exception support... ");
-		set_in_cr4(X86_CR4_OSXMMEXCPT);
-		printk("done.\n");
-	}
-
-	set_system_gate(SYSCALL_VECTOR, &system_call);
-
-	/* Reserve all the builtin and the syscall vector: */
-	for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
-		set_bit(i, used_vectors);
-
-	set_bit(SYSCALL_VECTOR, used_vectors);
-
-	init_thread_xstate();
-	/*
-	 * Should be a barrier for any external CPU state:
-	 */
-	cpu_init();
-
-	trap_init_hook();
-}
-
-static int __init kstack_setup(char *s)
-{
-	kstack_depth_to_print = simple_strtoul(s, NULL, 0);
-
-	return 1;
-}
-__setup("kstack=", kstack_setup);
-
-static int __init code_bytes_setup(char *s)
-{
-	code_bytes = simple_strtoul(s, NULL, 0);
-	if (code_bytes > 8192)
-		code_bytes = 8192;
-
-	return 1;
-}
-__setup("code_bytes=", code_bytes_setup);
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
deleted file mode 100644
index 513caac..0000000
--- a/arch/x86/kernel/traps_64.c
+++ /dev/null
@@ -1,1212 +0,0 @@
-/*
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
- *
- *  Pentium III FXSR, SSE support
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- */
-
-/*
- * 'Traps.c' handles hardware traps and faults after we have saved some
- * state in 'entry.S'.
- */
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
-#include <linux/kallsyms.h>
-#include <linux/spinlock.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/utsname.h>
-#include <linux/kdebug.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/unwind.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/kexec.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-#include <linux/nmi.h>
-#include <linux/mm.h>
-
-#if defined(CONFIG_EDAC)
-#include <linux/edac.h>
-#endif
-
-#include <asm/stacktrace.h>
-#include <asm/processor.h>
-#include <asm/debugreg.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/unwind.h>
-#include <asm/desc.h>
-#include <asm/i387.h>
-#include <asm/nmi.h>
-#include <asm/smp.h>
-#include <asm/io.h>
-#include <asm/pgalloc.h>
-#include <asm/proto.h>
-#include <asm/pda.h>
-#include <asm/traps.h>
-
-#include <mach_traps.h>
-
-int panic_on_unrecovered_nmi;
-int kstack_depth_to_print = 12;
-static unsigned int code_bytes = 64;
-static int ignore_nmis;
-static int die_counter;
-
-static inline void conditional_sti(struct pt_regs *regs)
-{
-	if (regs->flags & X86_EFLAGS_IF)
-		local_irq_enable();
-}
-
-static inline void preempt_conditional_sti(struct pt_regs *regs)
-{
-	inc_preempt_count();
-	if (regs->flags & X86_EFLAGS_IF)
-		local_irq_enable();
-}
-
-static inline void preempt_conditional_cli(struct pt_regs *regs)
-{
-	if (regs->flags & X86_EFLAGS_IF)
-		local_irq_disable();
-	/* Make sure to not schedule here because we could be running
-	   on an exception stack. */
-	dec_preempt_count();
-}
-
-void printk_address(unsigned long address, int reliable)
-{
-	printk(" [<%016lx>] %s%pS\n", address, reliable ? "": "? ", (void *) address);
-}
-
-static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
-					unsigned *usedp, char **idp)
-{
-	static char ids[][8] = {
-		[DEBUG_STACK - 1] = "#DB",
-		[NMI_STACK - 1] = "NMI",
-		[DOUBLEFAULT_STACK - 1] = "#DF",
-		[STACKFAULT_STACK - 1] = "#SS",
-		[MCE_STACK - 1] = "#MC",
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
-		[N_EXCEPTION_STACKS ... N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
-#endif
-	};
-	unsigned k;
-
-	/*
-	 * Iterate over all exception stacks, and figure out whether
-	 * 'stack' is in one of them:
-	 */
-	for (k = 0; k < N_EXCEPTION_STACKS; k++) {
-		unsigned long end = per_cpu(orig_ist, cpu).ist[k];
-		/*
-		 * Is 'stack' above this exception frame's end?
-		 * If yes then skip to the next frame.
-		 */
-		if (stack >= end)
-			continue;
-		/*
-		 * Is 'stack' above this exception frame's start address?
-		 * If yes then we found the right frame.
-		 */
-		if (stack >= end - EXCEPTION_STKSZ) {
-			/*
-			 * Make sure we only iterate through an exception
-			 * stack once. If it comes up for the second time
-			 * then there's something wrong going on - just
-			 * break out and return NULL:
-			 */
-			if (*usedp & (1U << k))
-				break;
-			*usedp |= 1U << k;
-			*idp = ids[k];
-			return (unsigned long *)end;
-		}
-		/*
-		 * If this is a debug stack, and if it has a larger size than
-		 * the usual exception stacks, then 'stack' might still
-		 * be within the lower portion of the debug stack:
-		 */
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
-		if (k == DEBUG_STACK - 1 && stack >= end - DEBUG_STKSZ) {
-			unsigned j = N_EXCEPTION_STACKS - 1;
-
-			/*
-			 * Black magic. A large debug stack is composed of
-			 * multiple exception stack entries, which we
-			 * iterate through now. Dont look:
-			 */
-			do {
-				++j;
-				end -= EXCEPTION_STKSZ;
-				ids[j][4] = '1' + (j - N_EXCEPTION_STACKS);
-			} while (stack < end - EXCEPTION_STKSZ);
-			if (*usedp & (1U << j))
-				break;
-			*usedp |= 1U << j;
-			*idp = ids[j];
-			return (unsigned long *)end;
-		}
-#endif
-	}
-	return NULL;
-}
-
-/*
- * x86-64 can have up to three kernel stacks: 
- * process stack
- * interrupt stack
- * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack
- */
-
-static inline int valid_stack_ptr(struct thread_info *tinfo,
-			void *p, unsigned int size, void *end)
-{
-	void *t = tinfo;
-	if (end) {
-		if (p < end && p >= (end-THREAD_SIZE))
-			return 1;
-		else
-			return 0;
-	}
-	return p > t && p < t + THREAD_SIZE - size;
-}
-
-/* The form of the top of the frame on the stack */
-struct stack_frame {
-	struct stack_frame *next_frame;
-	unsigned long return_address;
-};
-
-static inline unsigned long
-print_context_stack(struct thread_info *tinfo,
-		unsigned long *stack, unsigned long bp,
-		const struct stacktrace_ops *ops, void *data,
-		unsigned long *end)
-{
-	struct stack_frame *frame = (struct stack_frame *)bp;
-
-	while (valid_stack_ptr(tinfo, stack, sizeof(*stack), end)) {
-		unsigned long addr;
-
-		addr = *stack;
-		if (__kernel_text_address(addr)) {
-			if ((unsigned long) stack == bp + 8) {
-				ops->address(data, addr, 1);
-				frame = frame->next_frame;
-				bp = (unsigned long) frame;
-			} else {
-				ops->address(data, addr, bp == 0);
-			}
-		}
-		stack++;
-	}
-	return bp;
-}
-
-void dump_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp,
-		const struct stacktrace_ops *ops, void *data)
-{
-	const unsigned cpu = get_cpu();
-	unsigned long *irqstack_end = (unsigned long*)cpu_pda(cpu)->irqstackptr;
-	unsigned used = 0;
-	struct thread_info *tinfo;
-
-	if (!task)
-		task = current;
-
-	if (!stack) {
-		unsigned long dummy;
-		stack = &dummy;
-		if (task && task != current)
-			stack = (unsigned long *)task->thread.sp;
-	}
-
-#ifdef CONFIG_FRAME_POINTER
-	if (!bp) {
-		if (task == current) {
-			/* Grab bp right from our regs */
-			asm("movq %%rbp, %0" : "=r" (bp) :);
-		} else {
-			/* bp is the last reg pushed by switch_to */
-			bp = *(unsigned long *) task->thread.sp;
-		}
-	}
-#endif
-
-	/*
-	 * Print function call entries in all stacks, starting at the
-	 * current stack address. If the stacks consist of nested
-	 * exceptions
-	 */
-	tinfo = task_thread_info(task);
-	for (;;) {
-		char *id;
-		unsigned long *estack_end;
-		estack_end = in_exception_stack(cpu, (unsigned long)stack,
-						&used, &id);
-
-		if (estack_end) {
-			if (ops->stack(data, id) < 0)
-				break;
-
-			bp = print_context_stack(tinfo, stack, bp, ops,
-							data, estack_end);
-			ops->stack(data, "<EOE>");
-			/*
-			 * We link to the next stack via the
-			 * second-to-last pointer (index -2 to end) in the
-			 * exception stack:
-			 */
-			stack = (unsigned long *) estack_end[-2];
-			continue;
-		}
-		if (irqstack_end) {
-			unsigned long *irqstack;
-			irqstack = irqstack_end -
-				(IRQSTACKSIZE - 64) / sizeof(*irqstack);
-
-			if (stack >= irqstack && stack < irqstack_end) {
-				if (ops->stack(data, "IRQ") < 0)
-					break;
-				bp = print_context_stack(tinfo, stack, bp,
-						ops, data, irqstack_end);
-				/*
-				 * We link to the next stack (which would be
-				 * the process stack normally) the last
-				 * pointer (index -1 to end) in the IRQ stack:
-				 */
-				stack = (unsigned long *) (irqstack_end[-1]);
-				irqstack_end = NULL;
-				ops->stack(data, "EOI");
-				continue;
-			}
-		}
-		break;
-	}
-
-	/*
-	 * This handles the process stack:
-	 */
-	bp = print_context_stack(tinfo, stack, bp, ops, data, NULL);
-	put_cpu();
-}
-EXPORT_SYMBOL(dump_trace);
-
-static void
-print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
-	print_symbol(msg, symbol);
-	printk("\n");
-}
-
-static void print_trace_warning(void *data, char *msg)
-{
-	printk("%s\n", msg);
-}
-
-static int print_trace_stack(void *data, char *name)
-{
-	printk(" <%s> ", name);
-	return 0;
-}
-
-static void print_trace_address(void *data, unsigned long addr, int reliable)
-{
-	touch_nmi_watchdog();
-	printk_address(addr, reliable);
-}
-
-static const struct stacktrace_ops print_trace_ops = {
-	.warning = print_trace_warning,
-	.warning_symbol = print_trace_warning_symbol,
-	.stack = print_trace_stack,
-	.address = print_trace_address,
-};
-
-static void
-show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp, char *log_lvl)
-{
-	printk("\nCall Trace:\n");
-	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
-	printk("\n");
-}
-
-void show_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp)
-{
-	show_trace_log_lvl(task, regs, stack, bp, "");
-}
-
-static void
-show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, unsigned long bp, char *log_lvl)
-{
-	unsigned long *stack;
-	int i;
-	const int cpu = smp_processor_id();
-	unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr);
-	unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE);
-
-	// debugging aid: "show_stack(NULL, NULL);" prints the
-	// back trace for this cpu.
-
-	if (sp == NULL) {
-		if (task)
-			sp = (unsigned long *)task->thread.sp;
-		else
-			sp = (unsigned long *)&sp;
-	}
-
-	stack = sp;
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (stack >= irqstack && stack <= irqstack_end) {
-			if (stack == irqstack_end) {
-				stack = (unsigned long *) (irqstack_end[-1]);
-				printk(" <EOI> ");
-			}
-		} else {
-		if (((long) stack & (THREAD_SIZE-1)) == 0)
-			break;
-		}
-		if (i && ((i % 4) == 0))
-			printk("\n");
-		printk(" %016lx", *stack++);
-		touch_nmi_watchdog();
-	}
-	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
-}
-
-void show_stack(struct task_struct *task, unsigned long *sp)
-{
-	show_stack_log_lvl(task, NULL, sp, 0, "");
-}
-
-/*
- * The architecture-independent dump_stack generator
- */
-void dump_stack(void)
-{
-	unsigned long bp = 0;
-	unsigned long stack;
-
-#ifdef CONFIG_FRAME_POINTER
-	if (!bp)
-		asm("movq %%rbp, %0" : "=r" (bp):);
-#endif
-
-	printk("Pid: %d, comm: %.20s %s %s %.*s\n",
-		current->pid, current->comm, print_tainted(),
-		init_utsname()->release,
-		(int)strcspn(init_utsname()->version, " "),
-		init_utsname()->version);
-	show_trace(NULL, NULL, &stack, bp);
-}
-
-EXPORT_SYMBOL(dump_stack);
-
-void show_registers(struct pt_regs *regs)
-{
-	int i;
-	unsigned long sp;
-	const int cpu = smp_processor_id();
-	struct task_struct *cur = cpu_pda(cpu)->pcurrent;
-
-	sp = regs->sp;
-	printk("CPU %d ", cpu);
-	__show_regs(regs);
-	printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
-		cur->comm, cur->pid, task_thread_info(cur), cur);
-
-	/*
-	 * When in-kernel, we also print out the stack and code at the
-	 * time of the fault..
-	 */
-	if (!user_mode(regs)) {
-		unsigned int code_prologue = code_bytes * 43 / 64;
-		unsigned int code_len = code_bytes;
-		unsigned char c;
-		u8 *ip;
-
-		printk("Stack: ");
-		show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
-				regs->bp, "");
-		printk("\n");
-
-		printk(KERN_EMERG "Code: ");
-
-		ip = (u8 *)regs->ip - code_prologue;
-		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
-			/* try starting at RIP */
-			ip = (u8 *)regs->ip;
-			code_len = code_len - code_prologue + 1;
-		}
-		for (i = 0; i < code_len; i++, ip++) {
-			if (ip < (u8 *)PAGE_OFFSET ||
-					probe_kernel_address(ip, c)) {
-				printk(" Bad RIP value.");
-				break;
-			}
-			if (ip == (u8 *)regs->ip)
-				printk("<%02x> ", c);
-			else
-				printk("%02x ", c);
-		}
-	}
-	printk("\n");
-}
-
-int is_valid_bugaddr(unsigned long ip)
-{
-	unsigned short ud2;
-
-	if (__copy_from_user(&ud2, (const void __user *) ip, sizeof(ud2)))
-		return 0;
-
-	return ud2 == 0x0b0f;
-}
-
-static raw_spinlock_t die_lock = __RAW_SPIN_LOCK_UNLOCKED;
-static int die_owner = -1;
-static unsigned int die_nest_count;
-
-unsigned __kprobes long oops_begin(void)
-{
-	int cpu;
-	unsigned long flags;
-
-	oops_enter();
-
-	/* racy, but better than risking deadlock. */
-	raw_local_irq_save(flags);
-	cpu = smp_processor_id();
-	if (!__raw_spin_trylock(&die_lock)) {
-		if (cpu == die_owner) 
-			/* nested oops. should stop eventually */;
-		else
-			__raw_spin_lock(&die_lock);
-	}
-	die_nest_count++;
-	die_owner = cpu;
-	console_verbose();
-	bust_spinlocks(1);
-	return flags;
-}
-
-void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
-{
-	die_owner = -1;
-	bust_spinlocks(0);
-	die_nest_count--;
-	if (!die_nest_count)
-		/* Nest count reaches zero, release the lock. */
-		__raw_spin_unlock(&die_lock);
-	raw_local_irq_restore(flags);
-	if (!regs) {
-		oops_exit();
-		return;
-	}
-	if (panic_on_oops)
-		panic("Fatal exception");
-	oops_exit();
-	do_exit(signr);
-}
-
-int __kprobes __die(const char *str, struct pt_regs *regs, long err)
-{
-	printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff, ++die_counter);
-#ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
-#endif
-#ifdef CONFIG_SMP
-	printk("SMP ");
-#endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	printk("DEBUG_PAGEALLOC");
-#endif
-	printk("\n");
-	if (notify_die(DIE_OOPS, str, regs, err,
-			current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
-		return 1;
-
-	show_registers(regs);
-	add_taint(TAINT_DIE);
-	/* Executive summary in case the oops scrolled away */
-	printk(KERN_ALERT "RIP ");
-	printk_address(regs->ip, 1);
-	printk(" RSP <%016lx>\n", regs->sp);
-	if (kexec_should_crash(current))
-		crash_kexec(regs);
-	return 0;
-}
-
-void die(const char *str, struct pt_regs *regs, long err)
-{
-	unsigned long flags = oops_begin();
-
-	if (!user_mode(regs))
-		report_bug(regs->ip, regs);
-
-	if (__die(str, regs, err))
-		regs = NULL;
-	oops_end(flags, regs, SIGSEGV);
-}
-
-notrace __kprobes void
-die_nmi(char *str, struct pt_regs *regs, int do_panic)
-{
-	unsigned long flags;
-
-	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
-		return;
-
-	flags = oops_begin();
-	/*
-	 * We are in trouble anyway, lets at least try
-	 * to get a message out.
-	 */
-	printk(KERN_EMERG "%s", str);
-	printk(" on CPU%d, ip %08lx, registers:\n",
-		smp_processor_id(), regs->ip);
-	show_registers(regs);
-	if (kexec_should_crash(current))
-		crash_kexec(regs);
-	if (do_panic || panic_on_oops)
-		panic("Non maskable interrupt");
-	oops_end(flags, NULL, SIGBUS);
-	nmi_exit();
-	local_irq_enable();
-	do_exit(SIGBUS);
-}
-
-static void __kprobes
-do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
-	long error_code, siginfo_t *info)
-{
-	struct task_struct *tsk = current;
-
-	if (!user_mode(regs))
-		goto kernel_trap;
-
-	/*
-	 * We want error_code and trap_no set for userspace faults and
-	 * kernelspace faults which result in die(), but not
-	 * kernelspace faults which are fixed up.  die() gives the
-	 * process no chance to handle the signal and notice the
-	 * kernel fault information, so that won't result in polluting
-	 * the information about previously queued, but not yet
-	 * delivered, faults.  See also do_general_protection below.
-	 */
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = trapnr;
-
-	if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
-	    printk_ratelimit()) {
-		printk(KERN_INFO
-		       "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
-		       tsk->comm, tsk->pid, str,
-		       regs->ip, regs->sp, error_code);
-		print_vma_addr(" in ", regs->ip);
-		printk("\n");
-	}
-
-	if (info)
-		force_sig_info(signr, info, tsk);
-	else
-		force_sig(signr, tsk);
-	return;
-
-kernel_trap:
-	if (!fixup_exception(regs)) {
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = trapnr;
-		die(str, regs, error_code);
-	}
-	return;
-}
-
-#define DO_ERROR(trapnr, signr, str, name) \
-asmlinkage void do_##name(struct pt_regs * regs, long error_code)	\
-{									\
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-							== NOTIFY_STOP)	\
-		return;							\
-	conditional_sti(regs);						\
-	do_trap(trapnr, signr, str, regs, error_code, NULL);		\
-}
-
-#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)		\
-asmlinkage void do_##name(struct pt_regs * regs, long error_code)	\
-{									\
-	siginfo_t info;							\
-	info.si_signo = signr;						\
-	info.si_errno = 0;						\
-	info.si_code = sicode;						\
-	info.si_addr = (void __user *)siaddr;				\
-	trace_hardirqs_fixup();						\
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-							== NOTIFY_STOP)	\
-		return;							\
-	conditional_sti(regs);						\
-	do_trap(trapnr, signr, str, regs, error_code, &info);		\
-}
-
-DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
-DO_ERROR(4, SIGSEGV, "overflow", overflow)
-DO_ERROR(5, SIGSEGV, "bounds", bounds)
-DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
-DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
-DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
-DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
-DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
-
-/* Runs on IST stack */
-asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code)
-{
-	if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
-			12, SIGBUS) == NOTIFY_STOP)
-		return;
-	preempt_conditional_sti(regs);
-	do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
-	preempt_conditional_cli(regs);
-}
-
-asmlinkage void do_double_fault(struct pt_regs * regs, long error_code)
-{
-	static const char str[] = "double fault";
-	struct task_struct *tsk = current;
-
-	/* Return not checked because double check cannot be ignored */
-	notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV);
-
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = 8;
-
-	/* This is always a kernel trap and never fixable (and thus must
-	   never return). */
-	for (;;)
-		die(str, regs, error_code);
-}
-
-asmlinkage void __kprobes
-do_general_protection(struct pt_regs *regs, long error_code)
-{
-	struct task_struct *tsk;
-
-	conditional_sti(regs);
-
-	tsk = current;
-	if (!user_mode(regs))
-		goto gp_in_kernel;
-
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = 13;
-
-	if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
-			printk_ratelimit()) {
-		printk(KERN_INFO
-			"%s[%d] general protection ip:%lx sp:%lx error:%lx",
-			tsk->comm, tsk->pid,
-			regs->ip, regs->sp, error_code);
-		print_vma_addr(" in ", regs->ip);
-		printk("\n");
-	}
-
-	force_sig(SIGSEGV, tsk);
-	return;
-
-gp_in_kernel:
-	if (fixup_exception(regs))
-		return;
-
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = 13;
-	if (notify_die(DIE_GPF, "general protection fault", regs,
-				error_code, 13, SIGSEGV) == NOTIFY_STOP)
-		return;
-	die("general protection fault", regs, error_code);
-}
-
-static notrace __kprobes void
-mem_parity_error(unsigned char reason, struct pt_regs *regs)
-{
-	printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
-		reason);
-	printk(KERN_EMERG "You have some hardware problem, likely on the PCI bus.\n");
-
-#if defined(CONFIG_EDAC)
-	if (edac_handler_set()) {
-		edac_atomic_assert_error();
-		return;
-	}
-#endif
-
-	if (panic_on_unrecovered_nmi)
-		panic("NMI: Not continuing");
-
-	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
-
-	/* Clear and disable the memory parity error line. */
-	reason = (reason & 0xf) | 4;
-	outb(reason, 0x61);
-}
-
-static notrace __kprobes void
-io_check_error(unsigned char reason, struct pt_regs *regs)
-{
-	printk("NMI: IOCK error (debug interrupt?)\n");
-	show_registers(regs);
-
-	/* Re-enable the IOCK line, wait for a few seconds */
-	reason = (reason & 0xf) | 8;
-	outb(reason, 0x61);
-	mdelay(2000);
-	reason &= ~8;
-	outb(reason, 0x61);
-}
-
-static notrace __kprobes void
-unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
-{
-	if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
-		return;
-	printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
-		reason);
-	printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
-
-	if (panic_on_unrecovered_nmi)
-		panic("NMI: Not continuing");
-
-	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
-}
-
-/* Runs on IST stack. This code must keep interrupts off all the time.
-   Nested NMIs are prevented by the CPU. */
-asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs)
-{
-	unsigned char reason = 0;
-	int cpu;
-
-	cpu = smp_processor_id();
-
-	/* Only the BSP gets external NMIs from the system. */
-	if (!cpu)
-		reason = get_nmi_reason();
-
-	if (!(reason & 0xc0)) {
-		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
-								== NOTIFY_STOP)
-			return;
-		/*
-		 * Ok, so this is none of the documented NMI sources,
-		 * so it must be the NMI watchdog.
-		 */
-		if (nmi_watchdog_tick(regs, reason))
-			return;
-		if (!do_nmi_callback(regs, cpu))
-			unknown_nmi_error(reason, regs);
-
-		return;
-	}
-	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
-		return;
-
-	/* AK: following checks seem to be broken on modern chipsets. FIXME */
-	if (reason & 0x80)
-		mem_parity_error(reason, regs);
-	if (reason & 0x40)
-		io_check_error(reason, regs);
-}
-
-asmlinkage notrace __kprobes void
-do_nmi(struct pt_regs *regs, long error_code)
-{
-	nmi_enter();
-
-	add_pda(__nmi_count, 1);
-
-	if (!ignore_nmis)
-		default_do_nmi(regs);
-
-	nmi_exit();
-}
-
-void stop_nmi(void)
-{
-	acpi_nmi_disable();
-	ignore_nmis++;
-}
-
-void restart_nmi(void)
-{
-	ignore_nmis--;
-	acpi_nmi_enable();
-}
-
-/* runs on IST stack. */
-asmlinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
-{
-	trace_hardirqs_fixup();
-
-	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
-			== NOTIFY_STOP)
-		return;
-
-	preempt_conditional_sti(regs);
-	do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
-	preempt_conditional_cli(regs);
-}
-
-/* Help handler running on IST stack to switch back to user stack
-   for scheduling or signal handling. The actual stack switch is done in
-   entry.S */
-asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
-{
-	struct pt_regs *regs = eregs;
-	/* Did already sync */
-	if (eregs == (struct pt_regs *)eregs->sp)
-		;
-	/* Exception from user space */
-	else if (user_mode(eregs))
-		regs = task_pt_regs(current);
-	/* Exception from kernel and interrupts are enabled. Move to
- 	   kernel process stack. */
-	else if (eregs->flags & X86_EFLAGS_IF)
-		regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
-	if (eregs != regs)
-		*regs = *eregs;
-	return regs;
-}
-
-/* runs on IST stack. */
-asmlinkage void __kprobes do_debug(struct pt_regs * regs,
-				   unsigned long error_code)
-{
-	struct task_struct *tsk = current;
-	unsigned long condition;
-	siginfo_t info;
-
-	trace_hardirqs_fixup();
-
-	get_debugreg(condition, 6);
-
-	/*
-	 * The processor cleared BTF, so don't mark that we need it set.
-	 */
-	clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
-	tsk->thread.debugctlmsr = 0;
-
-	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
-						SIGTRAP) == NOTIFY_STOP)
-		return;
-
-	preempt_conditional_sti(regs);
-
-	/* Mask out spurious debug traps due to lazy DR7 setting */
-	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
-		if (!tsk->thread.debugreg7)
-			goto clear_dr7;
-	}
-
-	tsk->thread.debugreg6 = condition;
-
-	/*
-	 * Single-stepping through TF: make sure we ignore any events in
-	 * kernel space (but re-enable TF when returning to user mode).
-	 */
-	if (condition & DR_STEP) {
-		if (!user_mode(regs))
-			goto clear_TF_reenable;
-	}
-
-	/* Ok, finally something we can handle */
-	tsk->thread.trap_no = 1;
-	tsk->thread.error_code = error_code;
-	info.si_signo = SIGTRAP;
-	info.si_errno = 0;
-	info.si_code = TRAP_BRKPT;
-	info.si_addr = user_mode(regs) ? (void __user *)regs->ip : NULL;
-	force_sig_info(SIGTRAP, &info, tsk);
-
-clear_dr7:
-	set_debugreg(0, 7);
-	preempt_conditional_cli(regs);
-	return;
-
-clear_TF_reenable:
-	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
-	regs->flags &= ~X86_EFLAGS_TF;
-	preempt_conditional_cli(regs);
-	return;
-}
-
-static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
-{
-	if (fixup_exception(regs))
-		return 1;
-
-	notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE);
-	/* Illegal floating point operation in the kernel */
-	current->thread.trap_no = trapnr;
-	die(str, regs, 0);
-	return 0;
-}
-
-/*
- * Note that we play around with the 'TS' bit in an attempt to get
- * the correct behaviour even in the presence of the asynchronous
- * IRQ13 behaviour
- */
-asmlinkage void do_coprocessor_error(struct pt_regs *regs)
-{
-	void __user *ip = (void __user *)(regs->ip);
-	struct task_struct *task;
-	siginfo_t info;
-	unsigned short cwd, swd;
-
-	conditional_sti(regs);
-	if (!user_mode(regs) &&
-	    kernel_math_error(regs, "kernel x87 math error", 16))
-		return;
-
-	/*
-	 * Save the info for the exception handler and clear the error.
-	 */
-	task = current;
-	save_init_fpu(task);
-	task->thread.trap_no = 16;
-	task->thread.error_code = 0;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_code = __SI_FAULT;
-	info.si_addr = ip;
-	/*
-	 * (~cwd & swd) will mask out exceptions that are not set to unmasked
-	 * status.  0x3f is the exception bits in these regs, 0x200 is the
-	 * C1 reg you need in case of a stack fault, 0x040 is the stack
-	 * fault bit.  We should only be taking one exception at a time,
-	 * so if this combination doesn't produce any single exception,
-	 * then we have a bad program that isn't synchronizing its FPU usage
-	 * and it will suffer the consequences since we won't be able to
-	 * fully reproduce the context of the exception
-	 */
-	cwd = get_fpu_cwd(task);
-	swd = get_fpu_swd(task);
-	switch (swd & ~cwd & 0x3f) {
-	case 0x000: /* No unmasked exception */
-	default: /* Multiple exceptions */
-		break;
-	case 0x001: /* Invalid Op */
-		/*
-		 * swd & 0x240 == 0x040: Stack Underflow
-		 * swd & 0x240 == 0x240: Stack Overflow
-		 * User must clear the SF bit (0x40) if set
-		 */
-		info.si_code = FPE_FLTINV;
-		break;
-	case 0x002: /* Denormalize */
-	case 0x010: /* Underflow */
-		info.si_code = FPE_FLTUND;
-		break;
-	case 0x004: /* Zero Divide */
-		info.si_code = FPE_FLTDIV;
-		break;
-	case 0x008: /* Overflow */
-		info.si_code = FPE_FLTOVF;
-		break;
-	case 0x020: /* Precision */
-		info.si_code = FPE_FLTRES;
-		break;
-	}
-	force_sig_info(SIGFPE, &info, task);
-}
-
-asmlinkage void bad_intr(void)
-{
-	printk("bad interrupt"); 
-}
-
-asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs)
-{
-	void __user *ip = (void __user *)(regs->ip);
-	struct task_struct *task;
-	siginfo_t info;
-	unsigned short mxcsr;
-
-	conditional_sti(regs);
-	if (!user_mode(regs) &&
-        	kernel_math_error(regs, "kernel simd math error", 19))
-		return;
-
-	/*
-	 * Save the info for the exception handler and clear the error.
-	 */
-	task = current;
-	save_init_fpu(task);
-	task->thread.trap_no = 19;
-	task->thread.error_code = 0;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_code = __SI_FAULT;
-	info.si_addr = ip;
-	/*
-	 * The SIMD FPU exceptions are handled a little differently, as there
-	 * is only a single status/control register.  Thus, to determine which
-	 * unmasked exception was caught we must mask the exception mask bits
-	 * at 0x1f80, and then use these to mask the exception bits at 0x3f.
-	 */
-	mxcsr = get_fpu_mxcsr(task);
-	switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
-	case 0x000:
-	default:
-		break;
-	case 0x001: /* Invalid Op */
-		info.si_code = FPE_FLTINV;
-		break;
-	case 0x002: /* Denormalize */
-	case 0x010: /* Underflow */
-		info.si_code = FPE_FLTUND;
-		break;
-	case 0x004: /* Zero Divide */
-		info.si_code = FPE_FLTDIV;
-		break;
-	case 0x008: /* Overflow */
-		info.si_code = FPE_FLTOVF;
-		break;
-	case 0x020: /* Precision */
-		info.si_code = FPE_FLTRES;
-		break;
-	}
-	force_sig_info(SIGFPE, &info, task);
-}
-
-asmlinkage void do_spurious_interrupt_bug(struct pt_regs * regs)
-{
-}
-
-asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
-{
-}
-
-asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
-{
-}
-
-/*
- * 'math_state_restore()' saves the current math information in the
- * old math state array, and gets the new ones from the current task
- *
- * Careful.. There are problems with IBM-designed IRQ13 behaviour.
- * Don't touch unless you *really* know how it works.
- */
-asmlinkage void math_state_restore(void)
-{
-	struct task_struct *me = current;
-
-	if (!used_math()) {
-		local_irq_enable();
-		/*
-		 * does a slab alloc which can sleep
-		 */
-		if (init_fpu(me)) {
-			/*
-			 * ran out of memory!
-			 */
-			do_group_exit(SIGKILL);
-			return;
-		}
-		local_irq_disable();
-	}
-
-	clts();				/* Allow maths ops (or we recurse) */
-	/*
-	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
-	 */
-	if (unlikely(restore_fpu_checking(&me->thread.xstate->fxsave))) {
-		stts();
-		force_sig(SIGSEGV, me);
-		return;
-	}
-	task_thread_info(me)->status |= TS_USEDFPU;
-	me->fpu_counter++;
-}
-EXPORT_SYMBOL_GPL(math_state_restore);
-
-void __init trap_init(void)
-{
-	set_intr_gate(0, &divide_error);
-	set_intr_gate_ist(1, &debug, DEBUG_STACK);
-	set_intr_gate_ist(2, &nmi, NMI_STACK);
- 	set_system_gate_ist(3, &int3, DEBUG_STACK); /* int3 can be called from all */
-	set_system_gate(4, &overflow); /* int4 can be called from all */
-	set_intr_gate(5, &bounds);
-	set_intr_gate(6, &invalid_op);
-	set_intr_gate(7, &device_not_available);
-	set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK);
-	set_intr_gate(9, &coprocessor_segment_overrun);
-	set_intr_gate(10, &invalid_TSS);
-	set_intr_gate(11, &segment_not_present);
-	set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
-	set_intr_gate(13, &general_protection);
-	set_intr_gate(14, &page_fault);
-	set_intr_gate(15, &spurious_interrupt_bug);
-	set_intr_gate(16, &coprocessor_error);
-	set_intr_gate(17, &alignment_check);
-#ifdef CONFIG_X86_MCE
-	set_intr_gate_ist(18, &machine_check, MCE_STACK);
-#endif
-	set_intr_gate(19, &simd_coprocessor_error);
-
-#ifdef CONFIG_IA32_EMULATION
-	set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
-#endif
-	/*
-	 * initialize the per thread extended state:
-	 */
-	init_thread_xstate();
-	/*
-	 * Should be a barrier for any external CPU state:
-	 */
-	cpu_init();
-}
-
-static int __init oops_setup(char *s)
-{
-	if (!s)
-		return -EINVAL;
-	if (!strcmp(s, "panic"))
-		panic_on_oops = 1;
-	return 0;
-}
-early_param("oops", oops_setup);
-
-static int __init kstack_setup(char *s)
-{
-	if (!s)
-		return -EINVAL;
-	kstack_depth_to_print = simple_strtoul(s, NULL, 0);
-	return 0;
-}
-early_param("kstack", kstack_setup);
-
-static int __init code_bytes_setup(char *s)
-{
-	code_bytes = simple_strtoul(s, NULL, 0);
-	if (code_bytes > 8192)
-		code_bytes = 8192;
-
-	return 1;
-}
-__setup("code_bytes=", code_bytes_setup);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 8f98e9d..161bb85 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -104,7 +104,7 @@ __setup("notsc", notsc_setup);
 /*
  * Read TSC and the reference counters. Take care of SMI disturbance
  */
-static u64 tsc_read_refs(u64 *pm, u64 *hpet)
+static u64 tsc_read_refs(u64 *p, int hpet)
 {
 	u64 t1, t2;
 	int i;
@@ -112,9 +112,9 @@ static u64 tsc_read_refs(u64 *pm, u64 *hpet)
 	for (i = 0; i < MAX_RETRIES; i++) {
 		t1 = get_cycles();
 		if (hpet)
-			*hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
+			*p = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
 		else
-			*pm = acpi_pm_read_early();
+			*p = acpi_pm_read_early();
 		t2 = get_cycles();
 		if ((t2 - t1) < SMI_TRESHOLD)
 			return t2;
@@ -123,13 +123,59 @@ static u64 tsc_read_refs(u64 *pm, u64 *hpet)
 }
 
 /*
+ * Calculate the TSC frequency from HPET reference
+ */
+static unsigned long calc_hpet_ref(u64 deltatsc, u64 hpet1, u64 hpet2)
+{
+	u64 tmp;
+
+	if (hpet2 < hpet1)
+		hpet2 += 0x100000000ULL;
+	hpet2 -= hpet1;
+	tmp = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+	do_div(tmp, 1000000);
+	do_div(deltatsc, tmp);
+
+	return (unsigned long) deltatsc;
+}
+
+/*
+ * Calculate the TSC frequency from PMTimer reference
+ */
+static unsigned long calc_pmtimer_ref(u64 deltatsc, u64 pm1, u64 pm2)
+{
+	u64 tmp;
+
+	if (!pm1 && !pm2)
+		return ULONG_MAX;
+
+	if (pm2 < pm1)
+		pm2 += (u64)ACPI_PM_OVRRUN;
+	pm2 -= pm1;
+	tmp = pm2 * 1000000000LL;
+	do_div(tmp, PMTMR_TICKS_PER_SEC);
+	do_div(deltatsc, tmp);
+
+	return (unsigned long) deltatsc;
+}
+
+#define CAL_MS		10
+#define CAL_LATCH	(CLOCK_TICK_RATE / (1000 / CAL_MS))
+#define CAL_PIT_LOOPS	1000
+
+#define CAL2_MS		50
+#define CAL2_LATCH	(CLOCK_TICK_RATE / (1000 / CAL2_MS))
+#define CAL2_PIT_LOOPS	5000
+
+
+/*
  * Try to calibrate the TSC against the Programmable
  * Interrupt Timer and return the frequency of the TSC
  * in kHz.
  *
  * Return ULONG_MAX on failure to calibrate.
  */
-static unsigned long pit_calibrate_tsc(void)
+static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin)
 {
 	u64 tsc, t1, t2, delta;
 	unsigned long tscmin, tscmax;
@@ -144,8 +190,8 @@ static unsigned long pit_calibrate_tsc(void)
 	 * (LSB then MSB) to begin countdown.
 	 */
 	outb(0xb0, 0x43);
-	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
-	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
+	outb(latch & 0xff, 0x42);
+	outb(latch >> 8, 0x42);
 
 	tsc = t1 = t2 = get_cycles();
 
@@ -166,31 +212,154 @@ static unsigned long pit_calibrate_tsc(void)
 	/*
 	 * Sanity checks:
 	 *
-	 * If we were not able to read the PIT more than 5000
+	 * If we were not able to read the PIT more than loopmin
 	 * times, then we have been hit by a massive SMI
 	 *
 	 * If the maximum is 10 times larger than the minimum,
 	 * then we got hit by an SMI as well.
 	 */
-	if (pitcnt < 5000 || tscmax > 10 * tscmin)
+	if (pitcnt < loopmin || tscmax > 10 * tscmin)
 		return ULONG_MAX;
 
 	/* Calculate the PIT value */
 	delta = t2 - t1;
-	do_div(delta, 50);
+	do_div(delta, ms);
 	return delta;
 }
 
+/*
+ * This reads the current MSB of the PIT counter, and
+ * checks if we are running on sufficiently fast and
+ * non-virtualized hardware.
+ *
+ * Our expectations are:
+ *
+ *  - the PIT is running at roughly 1.19MHz
+ *
+ *  - each IO is going to take about 1us on real hardware,
+ *    but we allow it to be much faster (by a factor of 10) or
+ *    _slightly_ slower (ie we allow up to a 2us read+counter
+ *    update - anything else implies a unacceptably slow CPU
+ *    or PIT for the fast calibration to work.
+ *
+ *  - with 256 PIT ticks to read the value, we have 214us to
+ *    see the same MSB (and overhead like doing a single TSC
+ *    read per MSB value etc).
+ *
+ *  - We're doing 2 reads per loop (LSB, MSB), and we expect
+ *    them each to take about a microsecond on real hardware.
+ *    So we expect a count value of around 100. But we'll be
+ *    generous, and accept anything over 50.
+ *
+ *  - if the PIT is stuck, and we see *many* more reads, we
+ *    return early (and the next caller of pit_expect_msb()
+ *    then consider it a failure when they don't see the
+ *    next expected value).
+ *
+ * These expectations mean that we know that we have seen the
+ * transition from one expected value to another with a fairly
+ * high accuracy, and we didn't miss any events. We can thus
+ * use the TSC value at the transitions to calculate a pretty
+ * good value for the TSC frequencty.
+ */
+static inline int pit_expect_msb(unsigned char val)
+{
+	int count = 0;
+
+	for (count = 0; count < 50000; count++) {
+		/* Ignore LSB */
+		inb(0x42);
+		if (inb(0x42) != val)
+			break;
+	}
+	return count > 50;
+}
+
+/*
+ * How many MSB values do we want to see? We aim for a
+ * 15ms calibration, which assuming a 2us counter read
+ * error should give us roughly 150 ppm precision for
+ * the calibration.
+ */
+#define QUICK_PIT_MS 15
+#define QUICK_PIT_ITERATIONS (QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
+
+static unsigned long quick_pit_calibrate(void)
+{
+	/* Set the Gate high, disable speaker */
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	/*
+	 * Counter 2, mode 0 (one-shot), binary count
+	 *
+	 * NOTE! Mode 2 decrements by two (and then the
+	 * output is flipped each time, giving the same
+	 * final output frequency as a decrement-by-one),
+	 * so mode 0 is much better when looking at the
+	 * individual counts.
+	 */
+	outb(0xb0, 0x43);
+
+	/* Start at 0xffff */
+	outb(0xff, 0x42);
+	outb(0xff, 0x42);
+
+	if (pit_expect_msb(0xff)) {
+		int i;
+		u64 t1, t2, delta;
+		unsigned char expect = 0xfe;
+
+		t1 = get_cycles();
+		for (i = 0; i < QUICK_PIT_ITERATIONS; i++, expect--) {
+			if (!pit_expect_msb(expect))
+				goto failed;
+		}
+		t2 = get_cycles();
+
+		/*
+		 * Make sure we can rely on the second TSC timestamp:
+		 */
+		if (!pit_expect_msb(expect))
+			goto failed;
+
+		/*
+		 * Ok, if we get here, then we've seen the
+		 * MSB of the PIT decrement QUICK_PIT_ITERATIONS
+		 * times, and each MSB had many hits, so we never
+		 * had any sudden jumps.
+		 *
+		 * As a result, we can depend on there not being
+		 * any odd delays anywhere, and the TSC reads are
+		 * reliable.
+		 *
+		 * kHz = ticks / time-in-seconds / 1000;
+		 * kHz = (t2 - t1) / (QPI * 256 / PIT_TICK_RATE) / 1000
+		 * kHz = ((t2 - t1) * PIT_TICK_RATE) / (QPI * 256 * 1000)
+		 */
+		delta = (t2 - t1)*PIT_TICK_RATE;
+		do_div(delta, QUICK_PIT_ITERATIONS*256*1000);
+		printk("Fast TSC calibration using PIT\n");
+		return delta;
+	}
+failed:
+	return 0;
+}
 
 /**
  * native_calibrate_tsc - calibrate the tsc on boot
  */
 unsigned long native_calibrate_tsc(void)
 {
-	u64 tsc1, tsc2, delta, pm1, pm2, hpet1, hpet2;
+	u64 tsc1, tsc2, delta, ref1, ref2;
 	unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
-	unsigned long flags;
-	int hpet = is_hpet_enabled(), i;
+	unsigned long flags, latch, ms, fast_calibrate;
+	int hpet = is_hpet_enabled(), i, loopmin;
+
+	local_irq_save(flags);
+	fast_calibrate = quick_pit_calibrate();
+	local_irq_restore(flags);
+	if (fast_calibrate)
+		return fast_calibrate;
 
 	/*
 	 * Run 5 calibration loops to get the lowest frequency value
@@ -216,7 +385,13 @@ unsigned long native_calibrate_tsc(void)
 	 * calibration delay loop as we have to wait for a certain
 	 * amount of time anyway.
 	 */
-	for (i = 0; i < 5; i++) {
+
+	/* Preset PIT loop values */
+	latch = CAL_LATCH;
+	ms = CAL_MS;
+	loopmin = CAL_PIT_LOOPS;
+
+	for (i = 0; i < 3; i++) {
 		unsigned long tsc_pit_khz;
 
 		/*
@@ -226,16 +401,16 @@ unsigned long native_calibrate_tsc(void)
 		 * read the end value.
 		 */
 		local_irq_save(flags);
-		tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
-		tsc_pit_khz = pit_calibrate_tsc();
-		tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+		tsc1 = tsc_read_refs(&ref1, hpet);
+		tsc_pit_khz = pit_calibrate_tsc(latch, ms, loopmin);
+		tsc2 = tsc_read_refs(&ref2, hpet);
 		local_irq_restore(flags);
 
 		/* Pick the lowest PIT TSC calibration so far */
 		tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
 
 		/* hpet or pmtimer available ? */
-		if (!hpet && !pm1 && !pm2)
+		if (!hpet && !ref1 && !ref2)
 			continue;
 
 		/* Check, whether the sampling was disturbed by an SMI */
@@ -243,23 +418,41 @@ unsigned long native_calibrate_tsc(void)
 			continue;
 
 		tsc2 = (tsc2 - tsc1) * 1000000LL;
+		if (hpet)
+			tsc2 = calc_hpet_ref(tsc2, ref1, ref2);
+		else
+			tsc2 = calc_pmtimer_ref(tsc2, ref1, ref2);
 
-		if (hpet) {
-			if (hpet2 < hpet1)
-				hpet2 += 0x100000000ULL;
-			hpet2 -= hpet1;
-			tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
-			do_div(tsc1, 1000000);
-		} else {
-			if (pm2 < pm1)
-				pm2 += (u64)ACPI_PM_OVRRUN;
-			pm2 -= pm1;
-			tsc1 = pm2 * 1000000000LL;
-			do_div(tsc1, PMTMR_TICKS_PER_SEC);
+		tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
+
+		/* Check the reference deviation */
+		delta = ((u64) tsc_pit_min) * 100;
+		do_div(delta, tsc_ref_min);
+
+		/*
+		 * If both calibration results are inside a 10% window
+		 * then we can be sure, that the calibration
+		 * succeeded. We break out of the loop right away. We
+		 * use the reference value, as it is more precise.
+		 */
+		if (delta >= 90 && delta <= 110) {
+			printk(KERN_INFO
+			       "TSC: PIT calibration matches %s. %d loops\n",
+			       hpet ? "HPET" : "PMTIMER", i + 1);
+			return tsc_ref_min;
 		}
 
-		do_div(tsc2, tsc1);
-		tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
+		/*
+		 * Check whether PIT failed more than once. This
+		 * happens in virtualized environments. We need to
+		 * give the virtual PC a slightly longer timeframe for
+		 * the HPET/PMTIMER to make the result precise.
+		 */
+		if (i == 1 && tsc_pit_min == ULONG_MAX) {
+			latch = CAL2_LATCH;
+			ms = CAL2_MS;
+			loopmin = CAL2_PIT_LOOPS;
+		}
 	}
 
 	/*
@@ -270,7 +463,7 @@ unsigned long native_calibrate_tsc(void)
 		printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
 
 		/* We don't have an alternative source, disable TSC */
-		if (!hpet && !pm1 && !pm2) {
+		if (!hpet && !ref1 && !ref2) {
 			printk("TSC: No reference (HPET/PMTIMER) available\n");
 			return 0;
 		}
@@ -278,7 +471,7 @@ unsigned long native_calibrate_tsc(void)
 		/* The alternative source failed as well, disable TSC */
 		if (tsc_ref_min == ULONG_MAX) {
 			printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
-			       "failed due to SMI disturbance.\n");
+			       "failed.\n");
 			return 0;
 		}
 
@@ -290,44 +483,25 @@ unsigned long native_calibrate_tsc(void)
 	}
 
 	/* We don't have an alternative source, use the PIT calibration value */
-	if (!hpet && !pm1 && !pm2) {
+	if (!hpet && !ref1 && !ref2) {
 		printk(KERN_INFO "TSC: Using PIT calibration value\n");
 		return tsc_pit_min;
 	}
 
 	/* The alternative source failed, use the PIT calibration value */
 	if (tsc_ref_min == ULONG_MAX) {
-		printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed due "
-		       "to SMI disturbance. Using PIT calibration\n");
+		printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed. "
+		       "Using PIT calibration\n");
 		return tsc_pit_min;
 	}
 
-	/* Check the reference deviation */
-	delta = ((u64) tsc_pit_min) * 100;
-	do_div(delta, tsc_ref_min);
-
-	/*
-	 * If both calibration results are inside a 5% window, the we
-	 * use the lower frequency of those as it is probably the
-	 * closest estimate.
-	 */
-	if (delta >= 95 && delta <= 105) {
-		printk(KERN_INFO "TSC: PIT calibration confirmed by %s.\n",
-		       hpet ? "HPET" : "PMTIMER");
-		printk(KERN_INFO "TSC: using %s calibration value\n",
-		       tsc_pit_min <= tsc_ref_min ? "PIT" :
-		       hpet ? "HPET" : "PMTIMER");
-		return tsc_pit_min <= tsc_ref_min ? tsc_pit_min : tsc_ref_min;
-	}
-
-	printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
-	       hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
-
 	/*
 	 * The calibration values differ too much. In doubt, we use
 	 * the PIT value as we know that there are PMTIMERs around
-	 * running at double speed.
+	 * running at double speed. At least we let the user know:
 	 */
+	printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
+	       hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
 	printk(KERN_INFO "TSC: Using PIT calibration value\n");
 	return tsc_pit_min;
 }
diff --git a/arch/x86/kernel/uv_irq.c b/arch/x86/kernel/uv_irq.c
new file mode 100644
index 0000000..aeef529
--- /dev/null
+++ b/arch/x86/kernel/uv_irq.c
@@ -0,0 +1,79 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV IRQ functions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+
+#include <asm/apic.h>
+#include <asm/uv/uv_irq.h>
+
+static void uv_noop(unsigned int irq)
+{
+}
+
+static unsigned int uv_noop_ret(unsigned int irq)
+{
+	return 0;
+}
+
+static void uv_ack_apic(unsigned int irq)
+{
+	ack_APIC_irq();
+}
+
+struct irq_chip uv_irq_chip = {
+	.name		= "UV-CORE",
+	.startup	= uv_noop_ret,
+	.shutdown	= uv_noop,
+	.enable		= uv_noop,
+	.disable	= uv_noop,
+	.ack		= uv_noop,
+	.mask		= uv_noop,
+	.unmask		= uv_noop,
+	.eoi		= uv_ack_apic,
+	.end		= uv_noop,
+};
+
+/*
+ * Set up a mapping of an available irq and vector, and enable the specified
+ * MMR that defines the MSI that is to be sent to the specified CPU when an
+ * interrupt is raised.
+ */
+int uv_setup_irq(char *irq_name, int cpu, int mmr_blade,
+		 unsigned long mmr_offset)
+{
+	int irq;
+	int ret;
+
+	irq = create_irq();
+	if (irq <= 0)
+		return -EBUSY;
+
+	ret = arch_enable_uv_irq(irq_name, irq, cpu, mmr_blade, mmr_offset);
+	if (ret != irq)
+		destroy_irq(irq);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(uv_setup_irq);
+
+/*
+ * Tear down a mapping of an irq and vector, and disable the specified MMR that
+ * defined the MSI that was to be sent to the specified CPU when an interrupt
+ * was raised.
+ *
+ * Set mmr_blade and mmr_offset to what was passed in on uv_setup_irq().
+ */
+void uv_teardown_irq(unsigned int irq, int mmr_blade, unsigned long mmr_offset)
+{
+	arch_disable_uv_irq(mmr_blade, mmr_offset);
+	destroy_irq(irq);
+}
+EXPORT_SYMBOL_GPL(uv_teardown_irq);
diff --git a/arch/x86/kernel/uv_sysfs.c b/arch/x86/kernel/uv_sysfs.c
new file mode 100644
index 0000000..67f9b9d
--- /dev/null
+++ b/arch/x86/kernel/uv_sysfs.c
@@ -0,0 +1,72 @@
+/*
+ * This file supports the /sys/firmware/sgi_uv interfaces for SGI UV.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *  Copyright (c) Russ Anderson
+ */
+
+#include <linux/sysdev.h>
+#include <asm/uv/bios.h>
+
+struct kobject *sgi_uv_kobj;
+
+static ssize_t partition_id_show(struct kobject *kobj,
+			struct kobj_attribute *attr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%ld\n", sn_partition_id);
+}
+
+static ssize_t coherence_id_show(struct kobject *kobj,
+			struct kobj_attribute *attr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%ld\n", partition_coherence_id());
+}
+
+static struct kobj_attribute partition_id_attr =
+	__ATTR(partition_id, S_IRUGO, partition_id_show, NULL);
+
+static struct kobj_attribute coherence_id_attr =
+	__ATTR(coherence_id, S_IRUGO, coherence_id_show, NULL);
+
+
+static int __init sgi_uv_sysfs_init(void)
+{
+	unsigned long ret;
+
+	if (!sgi_uv_kobj)
+		sgi_uv_kobj = kobject_create_and_add("sgi_uv", firmware_kobj);
+	if (!sgi_uv_kobj) {
+		printk(KERN_WARNING "kobject_create_and_add sgi_uv failed \n");
+		return -EINVAL;
+	}
+
+	ret = sysfs_create_file(sgi_uv_kobj, &partition_id_attr.attr);
+	if (ret) {
+		printk(KERN_WARNING "sysfs_create_file partition_id failed \n");
+		return ret;
+	}
+
+	ret = sysfs_create_file(sgi_uv_kobj, &coherence_id_attr.attr);
+	if (ret) {
+		printk(KERN_WARNING "sysfs_create_file coherence_id failed \n");
+		return ret;
+	}
+
+	return 0;
+}
+
+device_initcall(sgi_uv_sysfs_init);
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 594ef47..0c9667f 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -25,45 +25,31 @@
 #include <asm/visws/cobalt.h>
 #include <asm/visws/piix4.h>
 #include <asm/arch_hooks.h>
+#include <asm/io_apic.h>
 #include <asm/fixmap.h>
 #include <asm/reboot.h>
 #include <asm/setup.h>
 #include <asm/e820.h>
-#include <asm/smp.h>
 #include <asm/io.h>
 
 #include <mach_ipi.h>
 
 #include "mach_apic.h"
 
-#include <linux/init.h>
-#include <linux/smp.h>
-
 #include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
 
-#include <asm/io.h>
-#include <asm/apic.h>
 #include <asm/i8259.h>
 #include <asm/irq_vectors.h>
-#include <asm/visws/cobalt.h>
 #include <asm/visws/lithium.h>
-#include <asm/visws/piix4.h>
 
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 
 extern int no_broadcast;
 
-#include <asm/io.h>
 #include <asm/apic.h>
-#include <asm/arch_hooks.h>
-#include <asm/visws/cobalt.h>
-#include <asm/visws/lithium.h>
 
 char visws_board_type	= -1;
 char visws_board_rev	= -1;
@@ -498,10 +484,11 @@ static void disable_cobalt_irq(unsigned int irq)
 static unsigned int startup_cobalt_irq(unsigned int irq)
 {
 	unsigned long flags;
+	struct irq_desc *desc = irq_to_desc(irq);
 
 	spin_lock_irqsave(&cobalt_lock, flags);
-	if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
-		irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
+	if ((desc->status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
+		desc->status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
 	enable_cobalt_irq(irq);
 	spin_unlock_irqrestore(&cobalt_lock, flags);
 	return 0;
@@ -520,9 +507,10 @@ static void ack_cobalt_irq(unsigned int irq)
 static void end_cobalt_irq(unsigned int irq)
 {
 	unsigned long flags;
+	struct irq_desc *desc = irq_to_desc(irq);
 
 	spin_lock_irqsave(&cobalt_lock, flags);
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+	if (!(desc->status & (IRQ_DISABLED | IRQ_INPROGRESS)))
 		enable_cobalt_irq(irq);
 	spin_unlock_irqrestore(&cobalt_lock, flags);
 }
@@ -640,12 +628,12 @@ static irqreturn_t piix4_master_intr(int irq, void *dev_id)
 
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 
-	desc = irq_desc + realirq;
+	desc = irq_to_desc(realirq);
 
 	/*
 	 * handle this 'virtual interrupt' as a Cobalt one now.
 	 */
-	kstat_cpu(smp_processor_id()).irqs[realirq]++;
+	kstat_incr_irqs_this_cpu(realirq, desc);
 
 	if (likely(desc->action != NULL))
 		handle_IRQ_event(realirq, desc->action);
@@ -676,27 +664,29 @@ void init_VISWS_APIC_irqs(void)
 	int i;
 
 	for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = 0;
-		irq_desc[i].depth = 1;
+		struct irq_desc *desc = irq_to_desc(i);
+
+		desc->status = IRQ_DISABLED;
+		desc->action = 0;
+		desc->depth = 1;
 
 		if (i == 0) {
-			irq_desc[i].chip = &cobalt_irq_type;
+			desc->chip = &cobalt_irq_type;
 		}
 		else if (i == CO_IRQ_IDE0) {
-			irq_desc[i].chip = &cobalt_irq_type;
+			desc->chip = &cobalt_irq_type;
 		}
 		else if (i == CO_IRQ_IDE1) {
-			irq_desc[i].chip = &cobalt_irq_type;
+			desc->chip = &cobalt_irq_type;
 		}
 		else if (i == CO_IRQ_8259) {
-			irq_desc[i].chip = &piix4_master_irq_type;
+			desc->chip = &piix4_master_irq_type;
 		}
 		else if (i < CO_IRQ_APIC0) {
-			irq_desc[i].chip = &piix4_virtual_irq_type;
+			desc->chip = &piix4_virtual_irq_type;
 		}
 		else if (IS_CO_APIC(i)) {
-			irq_desc[i].chip = &cobalt_irq_type;
+			desc->chip = &cobalt_irq_type;
 		}
 	}
 
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 38f566f..4eeb5cf 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -46,6 +46,7 @@
 #include <asm/io.h>
 #include <asm/tlbflush.h>
 #include <asm/irq.h>
+#include <asm/syscalls.h>
 
 /*
  * Known problems:
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 6ca515d..8b6c393 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -235,7 +235,7 @@ static void vmi_write_ldt_entry(struct desc_struct *dt, int entry,
 				const void *desc)
 {
 	u32 *ldt_entry = (u32 *)desc;
-	vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
+	vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
 }
 
 static void vmi_load_sp0(struct tss_struct *tss,
@@ -393,13 +393,13 @@ static void *vmi_kmap_atomic_pte(struct page *page, enum km_type type)
 }
 #endif
 
-static void vmi_allocate_pte(struct mm_struct *mm, u32 pfn)
+static void vmi_allocate_pte(struct mm_struct *mm, unsigned long pfn)
 {
 	vmi_set_page_type(pfn, VMI_PAGE_L1);
 	vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
 }
 
-static void vmi_allocate_pmd(struct mm_struct *mm, u32 pfn)
+static void vmi_allocate_pmd(struct mm_struct *mm, unsigned long pfn)
 {
  	/*
 	 * This call comes in very early, before mem_map is setup.
@@ -410,20 +410,20 @@ static void vmi_allocate_pmd(struct mm_struct *mm, u32 pfn)
 	vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0);
 }
 
-static void vmi_allocate_pmd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count)
+static void vmi_allocate_pmd_clone(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count)
 {
  	vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE);
 	vmi_check_page_type(clonepfn, VMI_PAGE_L2);
 	vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count);
 }
 
-static void vmi_release_pte(u32 pfn)
+static void vmi_release_pte(unsigned long pfn)
 {
 	vmi_ops.release_page(pfn, VMI_PAGE_L1);
 	vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
 }
 
-static void vmi_release_pmd(u32 pfn)
+static void vmi_release_pmd(unsigned long pfn)
 {
 	vmi_ops.release_page(pfn, VMI_PAGE_L2);
 	vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
@@ -905,8 +905,8 @@ static inline int __init activate_vmi(void)
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	para_fill(pv_apic_ops.apic_read, APICRead);
-	para_fill(pv_apic_ops.apic_write, APICWrite);
+       para_fill(apic_ops->read, APICRead);
+       para_fill(apic_ops->write, APICWrite);
 #endif
 
 	/*
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index 6953859..254ee07 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -235,11 +235,14 @@ static void __devinit vmi_time_init_clockevent(void)
 
 void __init vmi_time_init(void)
 {
+	unsigned int cpu;
 	/* Disable PIT: BIOSes start PIT CH0 with 18.2hz peridic. */
 	outb_pit(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */
 
 	vmi_time_init_clockevent();
 	setup_irq(0, &vmi_clock_action);
+	for_each_possible_cpu(cpu)
+		per_cpu(vector_irq, cpu)[vmi_get_timer_vector()] = 0;
 }
 
 #ifdef CONFIG_X86_LOCAL_APIC
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index af5bdad..a9b8560 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -140,10 +140,10 @@ SECTIONS
 	*(.con_initcall.init)
   	__con_initcall_end = .;
   }
-  .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
-	__x86cpuvendor_start = .;
-	*(.x86cpuvendor.init)
-	__x86cpuvendor_end = .;
+  .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+	__x86_cpu_dev_start = .;
+	*(.x86_cpu_dev.init)
+	__x86_cpu_dev_end = .;
   }
   SECURITY_INIT
   . = ALIGN(4);
@@ -180,6 +180,7 @@ SECTIONS
   . = ALIGN(PAGE_SIZE);
   .data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
 	__per_cpu_start = .;
+	*(.data.percpu.page_aligned)
 	*(.data.percpu)
 	*(.data.percpu.shared_aligned)
 	__per_cpu_end = .;
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index 63e5c1a..46e0544 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -168,12 +168,11 @@ SECTIONS
 	*(.con_initcall.init)
   }
   __con_initcall_end = .;
-  . = ALIGN(16);
-  __x86cpuvendor_start = .;
-  .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
-	*(.x86cpuvendor.init)
+  __x86_cpu_dev_start = .;
+  .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+	*(.x86_cpu_dev.init)
   }
-  __x86cpuvendor_end = .;
+  __x86_cpu_dev_end = .;
   SECURITY_INIT
 
   . = ALIGN(8);
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index 0c029e8..7766d36 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -61,7 +61,7 @@ static void vsmp_irq_enable(void)
 	native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
 }
 
-static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf,
+static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf,
 				  unsigned long addr, unsigned len)
 {
 	switch (type) {
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
new file mode 100644
index 0000000..b13acb7
--- /dev/null
+++ b/arch/x86/kernel/xsave.c
@@ -0,0 +1,345 @@
+/*
+ * xsave/xrstor support.
+ *
+ * Author: Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+#include <linux/bootmem.h>
+#include <linux/compat.h>
+#include <asm/i387.h>
+#ifdef CONFIG_IA32_EMULATION
+#include <asm/sigcontext32.h>
+#endif
+#include <asm/xcr.h>
+
+/*
+ * Supported feature mask by the CPU and the kernel.
+ */
+u64 pcntxt_mask;
+
+struct _fpx_sw_bytes fx_sw_reserved;
+#ifdef CONFIG_IA32_EMULATION
+struct _fpx_sw_bytes fx_sw_reserved_ia32;
+#endif
+
+/*
+ * Check for the presence of extended state information in the
+ * user fpstate pointer in the sigcontext.
+ */
+int check_for_xstate(struct i387_fxsave_struct __user *buf,
+		     void __user *fpstate,
+		     struct _fpx_sw_bytes *fx_sw_user)
+{
+	int min_xstate_size = sizeof(struct i387_fxsave_struct) +
+			      sizeof(struct xsave_hdr_struct);
+	unsigned int magic2;
+	int err;
+
+	err = __copy_from_user(fx_sw_user, &buf->sw_reserved[0],
+			       sizeof(struct _fpx_sw_bytes));
+
+	if (err)
+		return err;
+
+	/*
+	 * First Magic check failed.
+	 */
+	if (fx_sw_user->magic1 != FP_XSTATE_MAGIC1)
+		return -1;
+
+	/*
+	 * Check for error scenarios.
+	 */
+	if (fx_sw_user->xstate_size < min_xstate_size ||
+	    fx_sw_user->xstate_size > xstate_size ||
+	    fx_sw_user->xstate_size > fx_sw_user->extended_size)
+		return -1;
+
+	err = __get_user(magic2, (__u32 *) (((void *)fpstate) +
+					    fx_sw_user->extended_size -
+					    FP_XSTATE_MAGIC2_SIZE));
+	/*
+	 * Check for the presence of second magic word at the end of memory
+	 * layout. This detects the case where the user just copied the legacy
+	 * fpstate layout with out copying the extended state information
+	 * in the memory layout.
+	 */
+	if (err || magic2 != FP_XSTATE_MAGIC2)
+		return -1;
+
+	return 0;
+}
+
+#ifdef CONFIG_X86_64
+/*
+ * Signal frame handlers.
+ */
+
+int save_i387_xstate(void __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err = 0;
+
+	if (!access_ok(VERIFY_WRITE, buf, sig_xstate_size))
+		return -EACCES;
+
+	BUG_ON(sig_xstate_size < xstate_size);
+
+	if ((unsigned long)buf % 64)
+		printk("save_i387_xstate: bad fpstate %p\n", buf);
+
+	if (!used_math())
+		return 0;
+	clear_used_math(); /* trigger finit */
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		/*
+	 	 * Start with clearing the user buffer. This will present a
+	 	 * clean context for the bytes not touched by the fxsave/xsave.
+		 */
+		err = __clear_user(buf, sig_xstate_size);
+		if (err)
+			return err;
+
+		if (task_thread_info(tsk)->status & TS_XSAVE)
+			err = xsave_user(buf);
+		else
+			err = fxsave_user(buf);
+
+		if (err)
+			return err;
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		stts();
+	} else {
+		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
+				   xstate_size))
+			return -1;
+	}
+
+	if (task_thread_info(tsk)->status & TS_XSAVE) {
+		struct _fpstate __user *fx = buf;
+		struct _xstate __user *x = buf;
+		u64 xstate_bv;
+
+		err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved,
+				     sizeof(struct _fpx_sw_bytes));
+
+		err |= __put_user(FP_XSTATE_MAGIC2,
+				  (__u32 __user *) (buf + sig_xstate_size
+						    - FP_XSTATE_MAGIC2_SIZE));
+
+		/*
+		 * Read the xstate_bv which we copied (directly from the cpu or
+		 * from the state in task struct) to the user buffers and
+		 * set the FP/SSE bits.
+		 */
+		err |= __get_user(xstate_bv, &x->xstate_hdr.xstate_bv);
+
+		/*
+		 * For legacy compatible, we always set FP/SSE bits in the bit
+		 * vector while saving the state to the user context. This will
+		 * enable us capturing any changes(during sigreturn) to
+		 * the FP/SSE bits by the legacy applications which don't touch
+		 * xstate_bv in the xsave header.
+		 *
+		 * xsave aware apps can change the xstate_bv in the xsave
+		 * header as well as change any contents in the memory layout.
+		 * xrestore as part of sigreturn will capture all the changes.
+		 */
+		xstate_bv |= XSTATE_FPSSE;
+
+		err |= __put_user(xstate_bv, &x->xstate_hdr.xstate_bv);
+
+		if (err)
+			return err;
+	}
+
+	return 1;
+}
+
+/*
+ * Restore the extended state if present. Otherwise, restore the FP/SSE
+ * state.
+ */
+int restore_user_xstate(void __user *buf)
+{
+	struct _fpx_sw_bytes fx_sw_user;
+	u64 mask;
+	int err;
+
+	if (((unsigned long)buf % 64) ||
+	     check_for_xstate(buf, buf, &fx_sw_user))
+		goto fx_only;
+
+	mask = fx_sw_user.xstate_bv;
+
+	/*
+	 * restore the state passed by the user.
+	 */
+	err = xrestore_user(buf, mask);
+	if (err)
+		return err;
+
+	/*
+	 * init the state skipped by the user.
+	 */
+	mask = pcntxt_mask & ~mask;
+
+	xrstor_state(init_xstate_buf, mask);
+
+	return 0;
+
+fx_only:
+	/*
+	 * couldn't find the extended state information in the
+	 * memory layout. Restore just the FP/SSE and init all
+	 * the other extended state.
+	 */
+	xrstor_state(init_xstate_buf, pcntxt_mask & ~XSTATE_FPSSE);
+	return fxrstor_checking((__force struct i387_fxsave_struct *)buf);
+}
+
+/*
+ * This restores directly out of user space. Exceptions are handled.
+ */
+int restore_i387_xstate(void __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err = 0;
+
+	if (!buf) {
+		if (used_math())
+			goto clear;
+		return 0;
+	} else
+		if (!access_ok(VERIFY_READ, buf, sig_xstate_size))
+			return -EACCES;
+
+	if (!used_math()) {
+		err = init_fpu(tsk);
+		if (err)
+			return err;
+	}
+
+	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+		clts();
+		task_thread_info(current)->status |= TS_USEDFPU;
+	}
+	if (task_thread_info(tsk)->status & TS_XSAVE)
+		err = restore_user_xstate(buf);
+	else
+		err = fxrstor_checking((__force struct i387_fxsave_struct *)
+				       buf);
+	if (unlikely(err)) {
+		/*
+		 * Encountered an error while doing the restore from the
+		 * user buffer, clear the fpu state.
+		 */
+clear:
+		clear_fpu(tsk);
+		clear_used_math();
+	}
+	return err;
+}
+#endif
+
+/*
+ * Prepare the SW reserved portion of the fxsave memory layout, indicating
+ * the presence of the extended state information in the memory layout
+ * pointed by the fpstate pointer in the sigcontext.
+ * This will be saved when ever the FP and extended state context is
+ * saved on the user stack during the signal handler delivery to the user.
+ */
+static void prepare_fx_sw_frame(void)
+{
+	int size_extended = (xstate_size - sizeof(struct i387_fxsave_struct)) +
+			     FP_XSTATE_MAGIC2_SIZE;
+
+	sig_xstate_size = sizeof(struct _fpstate) + size_extended;
+
+#ifdef CONFIG_IA32_EMULATION
+	sig_xstate_ia32_size = sizeof(struct _fpstate_ia32) + size_extended;
+#endif
+
+	memset(&fx_sw_reserved, 0, sizeof(fx_sw_reserved));
+
+	fx_sw_reserved.magic1 = FP_XSTATE_MAGIC1;
+	fx_sw_reserved.extended_size = sig_xstate_size;
+	fx_sw_reserved.xstate_bv = pcntxt_mask;
+	fx_sw_reserved.xstate_size = xstate_size;
+#ifdef CONFIG_IA32_EMULATION
+	memcpy(&fx_sw_reserved_ia32, &fx_sw_reserved,
+	       sizeof(struct _fpx_sw_bytes));
+	fx_sw_reserved_ia32.extended_size = sig_xstate_ia32_size;
+#endif
+}
+
+/*
+ * Represents init state for the supported extended state.
+ */
+struct xsave_struct *init_xstate_buf;
+
+#ifdef CONFIG_X86_64
+unsigned int sig_xstate_size = sizeof(struct _fpstate);
+#endif
+
+/*
+ * Enable the extended processor state save/restore feature
+ */
+void __cpuinit xsave_init(void)
+{
+	if (!cpu_has_xsave)
+		return;
+
+	set_in_cr4(X86_CR4_OSXSAVE);
+
+	/*
+	 * Enable all the features that the HW is capable of
+	 * and the Linux kernel is aware of.
+	 */
+	xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
+}
+
+/*
+ * setup the xstate image representing the init state
+ */
+static void __init setup_xstate_init(void)
+{
+	init_xstate_buf = alloc_bootmem(xstate_size);
+	init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
+}
+
+/*
+ * Enable and initialize the xsave feature.
+ */
+void __init xsave_cntxt_init(void)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx);
+	pcntxt_mask = eax + ((u64)edx << 32);
+
+	if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) {
+		printk(KERN_ERR "FP/SSE not shown under xsave features 0x%llx\n",
+		       pcntxt_mask);
+		BUG();
+	}
+
+	/*
+	 * for now OS knows only about FP/SSE
+	 */
+	pcntxt_mask = pcntxt_mask & XCNTXT_MASK;
+	xsave_init();
+
+	/*
+	 * Recompute the context size for enabled features
+	 */
+	cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx);
+	xstate_size = ebx;
+
+	prepare_fx_sw_frame();
+
+	setup_xstate_init();
+
+	printk(KERN_INFO "xsave/xrstor: enabled xstate_bv 0x%llx, "
+	       "cntxt size 0x%x\n",
+	       pcntxt_mask, xstate_size);
+}
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index d0e940b..c023435 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -3,10 +3,13 @@
 #
 
 common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-                coalesced_mmio.o)
+                coalesced_mmio.o irq_comm.o)
 ifeq ($(CONFIG_KVM_TRACE),y)
 common-objs += $(addprefix ../../../virt/kvm/, kvm_trace.o)
 endif
+ifeq ($(CONFIG_DMAR),y)
+common-objs += $(addprefix ../../../virt/kvm/, vtd.o)
+endif
 
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/x86/kvm
 
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index c0f7872..11c6725 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -200,13 +200,14 @@ static int __pit_timer_fn(struct kvm_kpit_state *ps)
 
 	if (!atomic_inc_and_test(&pt->pending))
 		set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
-	if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
-		vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+
+	if (vcpu0 && waitqueue_active(&vcpu0->wq))
 		wake_up_interruptible(&vcpu0->wq);
-	}
 
-	pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
-	pt->scheduled = ktime_to_ns(pt->timer.expires);
+	hrtimer_add_expires_ns(&pt->timer, pt->period);
+	pt->scheduled = hrtimer_get_expires_ns(&pt->timer);
+	if (pt->period)
+		ps->channels[0].count_load_time = hrtimer_get_expires(&pt->timer);
 
 	return (pt->period == 0 ? 0 : 1);
 }
@@ -215,12 +216,22 @@ int pit_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	struct kvm_pit *pit = vcpu->kvm->arch.vpit;
 
-	if (pit && vcpu->vcpu_id == 0 && pit->pit_state.inject_pending)
+	if (pit && vcpu->vcpu_id == 0 && pit->pit_state.irq_ack)
 		return atomic_read(&pit->pit_state.pit_timer.pending);
-
 	return 0;
 }
 
+static void kvm_pit_ack_irq(struct kvm_irq_ack_notifier *kian)
+{
+	struct kvm_kpit_state *ps = container_of(kian, struct kvm_kpit_state,
+						 irq_ack_notifier);
+	spin_lock(&ps->inject_lock);
+	if (atomic_dec_return(&ps->pit_timer.pending) < 0)
+		atomic_inc(&ps->pit_timer.pending);
+	ps->irq_ack = 1;
+	spin_unlock(&ps->inject_lock);
+}
+
 static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
 {
 	struct kvm_kpit_state *ps;
@@ -246,7 +257,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 
 	timer = &pit->pit_state.pit_timer.timer;
 	if (hrtimer_cancel(timer))
-		hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+		hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
 }
 
 static void destroy_pit_timer(struct kvm_kpit_timer *pt)
@@ -255,8 +266,9 @@ static void destroy_pit_timer(struct kvm_kpit_timer *pt)
 	hrtimer_cancel(&pt->timer);
 }
 
-static void create_pit_timer(struct kvm_kpit_timer *pt, u32 val, int is_period)
+static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
 {
+	struct kvm_kpit_timer *pt = &ps->pit_timer;
 	s64 interval;
 
 	interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ);
@@ -268,6 +280,7 @@ static void create_pit_timer(struct kvm_kpit_timer *pt, u32 val, int is_period)
 	pt->period = (is_period == 0) ? 0 : interval;
 	pt->timer.function = pit_timer_fn;
 	atomic_set(&pt->pending, 0);
+	ps->irq_ack = 1;
 
 	hrtimer_start(&pt->timer, ktime_add_ns(ktime_get(), interval),
 		      HRTIMER_MODE_ABS);
@@ -302,11 +315,11 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 	case 1:
         /* FIXME: enhance mode 4 precision */
 	case 4:
-		create_pit_timer(&ps->pit_timer, val, 0);
+		create_pit_timer(ps, val, 0);
 		break;
 	case 2:
 	case 3:
-		create_pit_timer(&ps->pit_timer, val, 1);
+		create_pit_timer(ps, val, 1);
 		break;
 	default:
 		destroy_pit_timer(&ps->pit_timer);
@@ -520,7 +533,7 @@ void kvm_pit_reset(struct kvm_pit *pit)
 	mutex_unlock(&pit->pit_state.lock);
 
 	atomic_set(&pit->pit_state.pit_timer.pending, 0);
-	pit->pit_state.inject_pending = 1;
+	pit->pit_state.irq_ack = 1;
 }
 
 struct kvm_pit *kvm_create_pit(struct kvm *kvm)
@@ -534,6 +547,7 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm)
 
 	mutex_init(&pit->pit_state.lock);
 	mutex_lock(&pit->pit_state.lock);
+	spin_lock_init(&pit->pit_state.inject_lock);
 
 	/* Initialize PIO device */
 	pit->dev.read = pit_ioport_read;
@@ -555,6 +569,9 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm)
 	pit_state->pit = pit;
 	hrtimer_init(&pit_state->pit_timer.timer,
 		     CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+	pit_state->irq_ack_notifier.gsi = 0;
+	pit_state->irq_ack_notifier.irq_acked = kvm_pit_ack_irq;
+	kvm_register_irq_ack_notifier(kvm, &pit_state->irq_ack_notifier);
 	mutex_unlock(&pit->pit_state.lock);
 
 	kvm_pit_reset(pit);
@@ -578,10 +595,8 @@ void kvm_free_pit(struct kvm *kvm)
 static void __inject_pit_timer_intr(struct kvm *kvm)
 {
 	mutex_lock(&kvm->lock);
-	kvm_ioapic_set_irq(kvm->arch.vioapic, 0, 1);
-	kvm_ioapic_set_irq(kvm->arch.vioapic, 0, 0);
-	kvm_pic_set_irq(pic_irqchip(kvm), 0, 1);
-	kvm_pic_set_irq(pic_irqchip(kvm), 0, 0);
+	kvm_set_irq(kvm, 0, 1);
+	kvm_set_irq(kvm, 0, 0);
 	mutex_unlock(&kvm->lock);
 }
 
@@ -592,37 +607,19 @@ void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu)
 	struct kvm_kpit_state *ps;
 
 	if (vcpu && pit) {
+		int inject = 0;
 		ps = &pit->pit_state;
 
-		/* Try to inject pending interrupts when:
-		 * 1. Pending exists
-		 * 2. Last interrupt was accepted or waited for too long time*/
-		if (atomic_read(&ps->pit_timer.pending) &&
-		    (ps->inject_pending ||
-		    (jiffies - ps->last_injected_time
-				>= KVM_MAX_PIT_INTR_INTERVAL))) {
-			ps->inject_pending = 0;
-			__inject_pit_timer_intr(kvm);
-			ps->last_injected_time = jiffies;
-		}
-	}
-}
-
-void kvm_pit_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
-{
-	struct kvm_arch *arch = &vcpu->kvm->arch;
-	struct kvm_kpit_state *ps;
-
-	if (vcpu && arch->vpit) {
-		ps = &arch->vpit->pit_state;
-		if (atomic_read(&ps->pit_timer.pending) &&
-		(((arch->vpic->pics[0].imr & 1) == 0 &&
-		  arch->vpic->pics[0].irq_base == vec) ||
-		  (arch->vioapic->redirtbl[0].fields.vector == vec &&
-		  arch->vioapic->redirtbl[0].fields.mask != 1))) {
-			ps->inject_pending = 1;
-			atomic_dec(&ps->pit_timer.pending);
-			ps->channels[0].count_load_time = ktime_get();
+		/* Try to inject pending interrupts when
+		 * last one has been acked.
+		 */
+		spin_lock(&ps->inject_lock);
+		if (atomic_read(&ps->pit_timer.pending) && ps->irq_ack) {
+			ps->irq_ack = 0;
+			inject = 1;
 		}
+		spin_unlock(&ps->inject_lock);
+		if (inject)
+			__inject_pit_timer_intr(kvm);
 	}
 }
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index db25c2a..e436d49 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -8,7 +8,6 @@ struct kvm_kpit_timer {
 	int irq;
 	s64 period; /* unit: ns */
 	s64 scheduled;
-	ktime_t last_update;
 	atomic_t pending;
 };
 
@@ -34,8 +33,9 @@ struct kvm_kpit_state {
 	u32    speaker_data_on;
 	struct mutex lock;
 	struct kvm_pit *pit;
-	bool inject_pending; /* if inject pending interrupts */
-	unsigned long last_injected_time;
+	spinlock_t inject_lock;
+	unsigned long irq_ack;
+	struct kvm_irq_ack_notifier irq_ack_notifier;
 };
 
 struct kvm_pit {
@@ -54,7 +54,6 @@ struct kvm_pit {
 #define KVM_PIT_CHANNEL_MASK	    0x3
 
 void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu);
-void kvm_pit_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
 void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val);
 struct kvm_pit *kvm_create_pit(struct kvm *kvm);
 void kvm_free_pit(struct kvm *kvm);
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index c31164e..17e41e1 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -30,6 +30,19 @@
 
 #include <linux/kvm_host.h>
 
+static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
+{
+	s->isr &= ~(1 << irq);
+	s->isr_ack |= (1 << irq);
+}
+
+void kvm_pic_clear_isr_ack(struct kvm *kvm)
+{
+	struct kvm_pic *s = pic_irqchip(kvm);
+	s->pics[0].isr_ack = 0xff;
+	s->pics[1].isr_ack = 0xff;
+}
+
 /*
  * set irq level. If an edge is detected, then the IRR is set to 1
  */
@@ -141,11 +154,12 @@ void kvm_pic_set_irq(void *opaque, int irq, int level)
  */
 static inline void pic_intack(struct kvm_kpic_state *s, int irq)
 {
+	s->isr |= 1 << irq;
 	if (s->auto_eoi) {
 		if (s->rotate_on_auto_eoi)
 			s->priority_add = (irq + 1) & 7;
-	} else
-		s->isr |= (1 << irq);
+		pic_clear_isr(s, irq);
+	}
 	/*
 	 * We don't clear a level sensitive interrupt here
 	 */
@@ -153,9 +167,10 @@ static inline void pic_intack(struct kvm_kpic_state *s, int irq)
 		s->irr &= ~(1 << irq);
 }
 
-int kvm_pic_read_irq(struct kvm_pic *s)
+int kvm_pic_read_irq(struct kvm *kvm)
 {
 	int irq, irq2, intno;
+	struct kvm_pic *s = pic_irqchip(kvm);
 
 	irq = pic_get_irq(&s->pics[0]);
 	if (irq >= 0) {
@@ -181,16 +196,32 @@ int kvm_pic_read_irq(struct kvm_pic *s)
 		intno = s->pics[0].irq_base + irq;
 	}
 	pic_update_irq(s);
+	kvm_notify_acked_irq(kvm, irq);
 
 	return intno;
 }
 
 void kvm_pic_reset(struct kvm_kpic_state *s)
 {
+	int irq, irqbase;
+	struct kvm *kvm = s->pics_state->irq_request_opaque;
+	struct kvm_vcpu *vcpu0 = kvm->vcpus[0];
+
+	if (s == &s->pics_state->pics[0])
+		irqbase = 0;
+	else
+		irqbase = 8;
+
+	for (irq = 0; irq < PIC_NUM_PINS/2; irq++) {
+		if (vcpu0 && kvm_apic_accept_pic_intr(vcpu0))
+			if (s->irr & (1 << irq) || s->isr & (1 << irq))
+				kvm_notify_acked_irq(kvm, irq+irqbase);
+	}
 	s->last_irr = 0;
 	s->irr = 0;
 	s->imr = 0;
 	s->isr = 0;
+	s->isr_ack = 0xff;
 	s->priority_add = 0;
 	s->irq_base = 0;
 	s->read_reg_select = 0;
@@ -243,7 +274,7 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val)
 				priority = get_priority(s, s->isr);
 				if (priority != 8) {
 					irq = (priority + s->priority_add) & 7;
-					s->isr &= ~(1 << irq);
+					pic_clear_isr(s, irq);
 					if (cmd == 5)
 						s->priority_add = (irq + 1) & 7;
 					pic_update_irq(s->pics_state);
@@ -251,7 +282,7 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val)
 				break;
 			case 3:
 				irq = val & 7;
-				s->isr &= ~(1 << irq);
+				pic_clear_isr(s, irq);
 				pic_update_irq(s->pics_state);
 				break;
 			case 6:
@@ -260,8 +291,8 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val)
 				break;
 			case 7:
 				irq = val & 7;
-				s->isr &= ~(1 << irq);
 				s->priority_add = (irq + 1) & 7;
+				pic_clear_isr(s, irq);
 				pic_update_irq(s->pics_state);
 				break;
 			default:
@@ -303,7 +334,7 @@ static u32 pic_poll_read(struct kvm_kpic_state *s, u32 addr1)
 			s->pics_state->pics[0].irr &= ~(1 << 2);
 		}
 		s->irr &= ~(1 << ret);
-		s->isr &= ~(1 << ret);
+		pic_clear_isr(s, ret);
 		if (addr1 >> 7 || ret != 2)
 			pic_update_irq(s->pics_state);
 	} else {
@@ -422,10 +453,14 @@ static void pic_irq_request(void *opaque, int level)
 {
 	struct kvm *kvm = opaque;
 	struct kvm_vcpu *vcpu = kvm->vcpus[0];
+	struct kvm_pic *s = pic_irqchip(kvm);
+	int irq = pic_get_irq(&s->pics[0]);
 
-	pic_irqchip(kvm)->output = level;
-	if (vcpu)
+	s->output = level;
+	if (vcpu && level && (s->pics[0].isr_ack & (1 << irq))) {
+		s->pics[0].isr_ack &= ~(1 << irq);
 		kvm_vcpu_kick(vcpu);
+	}
 }
 
 struct kvm_pic *kvm_create_pic(struct kvm *kvm)
diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
index 76d736b..c019b8e 100644
--- a/arch/x86/kvm/irq.c
+++ b/arch/x86/kvm/irq.c
@@ -72,7 +72,7 @@ int kvm_cpu_get_interrupt(struct kvm_vcpu *v)
 		if (kvm_apic_accept_pic_intr(v)) {
 			s = pic_irqchip(v->kvm);
 			s->output = 0;		/* PIC */
-			vector = kvm_pic_read_irq(s);
+			vector = kvm_pic_read_irq(v->kvm);
 		}
 	}
 	return vector;
@@ -90,7 +90,6 @@ EXPORT_SYMBOL_GPL(kvm_inject_pending_timer_irqs);
 void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
 {
 	kvm_apic_timer_intr_post(vcpu, vec);
-	kvm_pit_timer_intr_post(vcpu, vec);
 	/* TODO: PIT, RTC etc. */
 }
 EXPORT_SYMBOL_GPL(kvm_timer_intr_post);
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 7ca47cb..f17c8f5 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -42,6 +42,7 @@ struct kvm_kpic_state {
 	u8 irr;		/* interrupt request register */
 	u8 imr;		/* interrupt mask register */
 	u8 isr;		/* interrupt service register */
+	u8 isr_ack;	/* interrupt ack detection */
 	u8 priority_add;	/* highest irq priority */
 	u8 irq_base;
 	u8 read_reg_select;
@@ -63,12 +64,13 @@ struct kvm_pic {
 	void *irq_request_opaque;
 	int output;		/* intr from master PIC */
 	struct kvm_io_device dev;
+	void (*ack_notifier)(void *opaque, int irq);
 };
 
 struct kvm_pic *kvm_create_pic(struct kvm *kvm);
-void kvm_pic_set_irq(void *opaque, int irq, int level);
-int kvm_pic_read_irq(struct kvm_pic *s);
+int kvm_pic_read_irq(struct kvm *kvm);
 void kvm_pic_update_irq(struct kvm_pic *s);
+void kvm_pic_clear_isr_ack(struct kvm *kvm);
 
 static inline struct kvm_pic *pic_irqchip(struct kvm *kvm)
 {
diff --git a/arch/x86/kvm/kvm_cache_regs.h b/arch/x86/kvm/kvm_cache_regs.h
new file mode 100644
index 0000000..1ff819d
--- /dev/null
+++ b/arch/x86/kvm/kvm_cache_regs.h
@@ -0,0 +1,32 @@
+#ifndef ASM_KVM_CACHE_REGS_H
+#define ASM_KVM_CACHE_REGS_H
+
+static inline unsigned long kvm_register_read(struct kvm_vcpu *vcpu,
+					      enum kvm_reg reg)
+{
+	if (!test_bit(reg, (unsigned long *)&vcpu->arch.regs_avail))
+		kvm_x86_ops->cache_reg(vcpu, reg);
+
+	return vcpu->arch.regs[reg];
+}
+
+static inline void kvm_register_write(struct kvm_vcpu *vcpu,
+				      enum kvm_reg reg,
+				      unsigned long val)
+{
+	vcpu->arch.regs[reg] = val;
+	__set_bit(reg, (unsigned long *)&vcpu->arch.regs_dirty);
+	__set_bit(reg, (unsigned long *)&vcpu->arch.regs_avail);
+}
+
+static inline unsigned long kvm_rip_read(struct kvm_vcpu *vcpu)
+{
+	return kvm_register_read(vcpu, VCPU_REGS_RIP);
+}
+
+static inline void kvm_rip_write(struct kvm_vcpu *vcpu, unsigned long val)
+{
+	kvm_register_write(vcpu, VCPU_REGS_RIP, val);
+}
+
+#endif
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 73f43de..0fc3cab 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -32,6 +32,7 @@
 #include <asm/current.h>
 #include <asm/apicdef.h>
 #include <asm/atomic.h>
+#include "kvm_cache_regs.h"
 #include "irq.h"
 
 #define PRId64 "d"
@@ -338,13 +339,7 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 		} else
 			apic_clear_vector(vector, apic->regs + APIC_TMR);
 
-		if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE)
-			kvm_vcpu_kick(vcpu);
-		else if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED) {
-			vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
-			if (waitqueue_active(&vcpu->wq))
-				wake_up_interruptible(&vcpu->wq);
-		}
+		kvm_vcpu_kick(vcpu);
 
 		result = (orig_irr == 0);
 		break;
@@ -370,21 +365,18 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 			vcpu->arch.mp_state = KVM_MP_STATE_INIT_RECEIVED;
 			kvm_vcpu_kick(vcpu);
 		} else {
-			printk(KERN_DEBUG
-			       "Ignoring de-assert INIT to vcpu %d\n",
-			       vcpu->vcpu_id);
+			apic_debug("Ignoring de-assert INIT to vcpu %d\n",
+				   vcpu->vcpu_id);
 		}
-
 		break;
 
 	case APIC_DM_STARTUP:
-		printk(KERN_DEBUG "SIPI to vcpu %d vector 0x%02x\n",
-		       vcpu->vcpu_id, vector);
+		apic_debug("SIPI to vcpu %d vector 0x%02x\n",
+			   vcpu->vcpu_id, vector);
 		if (vcpu->arch.mp_state == KVM_MP_STATE_INIT_RECEIVED) {
 			vcpu->arch.sipi_vector = vector;
 			vcpu->arch.mp_state = KVM_MP_STATE_SIPI_RECEIVED;
-			if (waitqueue_active(&vcpu->wq))
-				wake_up_interruptible(&vcpu->wq);
+			kvm_vcpu_kick(vcpu);
 		}
 		break;
 
@@ -438,7 +430,7 @@ struct kvm_vcpu *kvm_get_lowest_prio_vcpu(struct kvm *kvm, u8 vector,
 static void apic_set_eoi(struct kvm_lapic *apic)
 {
 	int vector = apic_find_highest_isr(apic);
-
+	int trigger_mode;
 	/*
 	 * Not every write EOI will has corresponding ISR,
 	 * one example is when Kernel check timer on setup_IO_APIC
@@ -450,7 +442,10 @@ static void apic_set_eoi(struct kvm_lapic *apic)
 	apic_update_ppr(apic);
 
 	if (apic_test_and_clear_vector(vector, apic->regs + APIC_TMR))
-		kvm_ioapic_update_eoi(apic->vcpu->kvm, vector);
+		trigger_mode = IOAPIC_LEVEL_TRIG;
+	else
+		trigger_mode = IOAPIC_EDGE_TRIG;
+	kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
 }
 
 static void apic_send_ipi(struct kvm_lapic *apic)
@@ -558,8 +553,7 @@ static void __report_tpr_access(struct kvm_lapic *apic, bool write)
 	struct kvm_run *run = vcpu->run;
 
 	set_bit(KVM_REQ_REPORT_TPR_ACCESS, &vcpu->requests);
-	kvm_x86_ops->cache_regs(vcpu);
-	run->tpr_access.rip = vcpu->arch.rip;
+	run->tpr_access.rip = kvm_rip_read(vcpu);
 	run->tpr_access.is_write = write;
 }
 
@@ -683,9 +677,9 @@ static void apic_mmio_write(struct kvm_io_device *this,
 	 * Refer SDM 8.4.1
 	 */
 	if (len != 4 || alignment) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "apic write: bad size=%d %lx\n",
-			       len, (long)address);
+		/* Don't shout loud, $infamous_os would cause only noise. */
+		apic_debug("apic write: bad size=%d %lx\n",
+			   len, (long)address);
 		return;
 	}
 
@@ -947,15 +941,12 @@ static int __apic_timer_fn(struct kvm_lapic *apic)
 
 	if(!atomic_inc_and_test(&apic->timer.pending))
 		set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
-	if (waitqueue_active(q)) {
-		apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+	if (waitqueue_active(q))
 		wake_up_interruptible(q);
-	}
+
 	if (apic_lvtt_period(apic)) {
 		result = 1;
-		apic->timer.dev.expires = ktime_add_ns(
-					apic->timer.dev.expires,
-					apic->timer.period);
+		hrtimer_add_expires_ns(&apic->timer.dev, apic->timer.period);
 	}
 	return result;
 }
@@ -1124,7 +1115,7 @@ void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu)
 
 	timer = &apic->timer.dev;
 	if (hrtimer_cancel(timer))
-		hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+		hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
 }
 
 void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 3da2508..99c239c 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -70,6 +70,9 @@ static int dbg = 0;
 module_param(dbg, bool, 0644);
 #endif
 
+static int oos_shadow = 1;
+module_param(oos_shadow, bool, 0644);
+
 #ifndef MMU_DEBUG
 #define ASSERT(x) do { } while (0)
 #else
@@ -135,18 +138,24 @@ module_param(dbg, bool, 0644);
 #define ACC_USER_MASK    PT_USER_MASK
 #define ACC_ALL          (ACC_EXEC_MASK | ACC_WRITE_MASK | ACC_USER_MASK)
 
-struct kvm_pv_mmu_op_buffer {
-	void *ptr;
-	unsigned len;
-	unsigned processed;
-	char buf[512] __aligned(sizeof(long));
-};
+#define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
 
 struct kvm_rmap_desc {
 	u64 *shadow_ptes[RMAP_EXT];
 	struct kvm_rmap_desc *more;
 };
 
+struct kvm_shadow_walk {
+	int (*entry)(struct kvm_shadow_walk *walk, struct kvm_vcpu *vcpu,
+		     u64 addr, u64 *spte, int level);
+};
+
+struct kvm_unsync_walk {
+	int (*entry) (struct kvm_mmu_page *sp, struct kvm_unsync_walk *walk);
+};
+
+typedef int (*mmu_parent_walk_fn) (struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp);
+
 static struct kmem_cache *pte_chain_cache;
 static struct kmem_cache *rmap_desc_cache;
 static struct kmem_cache *mmu_page_header_cache;
@@ -405,16 +414,19 @@ static int host_largepage_backed(struct kvm *kvm, gfn_t gfn)
 {
 	struct vm_area_struct *vma;
 	unsigned long addr;
+	int ret = 0;
 
 	addr = gfn_to_hva(kvm, gfn);
 	if (kvm_is_error_hva(addr))
-		return 0;
+		return ret;
 
+	down_read(&current->mm->mmap_sem);
 	vma = find_vma(current->mm, addr);
 	if (vma && is_vm_hugetlb_page(vma))
-		return 1;
+		ret = 1;
+	up_read(&current->mm->mmap_sem);
 
-	return 0;
+	return ret;
 }
 
 static int is_largepage_backed(struct kvm_vcpu *vcpu, gfn_t large_gfn)
@@ -649,8 +661,6 @@ static void rmap_write_protect(struct kvm *kvm, u64 gfn)
 
 	if (write_protected)
 		kvm_flush_remote_tlbs(kvm);
-
-	account_shadowed(kvm, gfn);
 }
 
 static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
@@ -859,6 +869,77 @@ static void mmu_page_remove_parent_pte(struct kvm_mmu_page *sp,
 	BUG();
 }
 
+
+static void mmu_parent_walk(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
+			    mmu_parent_walk_fn fn)
+{
+	struct kvm_pte_chain *pte_chain;
+	struct hlist_node *node;
+	struct kvm_mmu_page *parent_sp;
+	int i;
+
+	if (!sp->multimapped && sp->parent_pte) {
+		parent_sp = page_header(__pa(sp->parent_pte));
+		fn(vcpu, parent_sp);
+		mmu_parent_walk(vcpu, parent_sp, fn);
+		return;
+	}
+	hlist_for_each_entry(pte_chain, node, &sp->parent_ptes, link)
+		for (i = 0; i < NR_PTE_CHAIN_ENTRIES; ++i) {
+			if (!pte_chain->parent_ptes[i])
+				break;
+			parent_sp = page_header(__pa(pte_chain->parent_ptes[i]));
+			fn(vcpu, parent_sp);
+			mmu_parent_walk(vcpu, parent_sp, fn);
+		}
+}
+
+static void kvm_mmu_update_unsync_bitmap(u64 *spte)
+{
+	unsigned int index;
+	struct kvm_mmu_page *sp = page_header(__pa(spte));
+
+	index = spte - sp->spt;
+	__set_bit(index, sp->unsync_child_bitmap);
+	sp->unsync_children = 1;
+}
+
+static void kvm_mmu_update_parents_unsync(struct kvm_mmu_page *sp)
+{
+	struct kvm_pte_chain *pte_chain;
+	struct hlist_node *node;
+	int i;
+
+	if (!sp->parent_pte)
+		return;
+
+	if (!sp->multimapped) {
+		kvm_mmu_update_unsync_bitmap(sp->parent_pte);
+		return;
+	}
+
+	hlist_for_each_entry(pte_chain, node, &sp->parent_ptes, link)
+		for (i = 0; i < NR_PTE_CHAIN_ENTRIES; ++i) {
+			if (!pte_chain->parent_ptes[i])
+				break;
+			kvm_mmu_update_unsync_bitmap(pte_chain->parent_ptes[i]);
+		}
+}
+
+static int unsync_walk_fn(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
+{
+	sp->unsync_children = 1;
+	kvm_mmu_update_parents_unsync(sp);
+	return 1;
+}
+
+static void kvm_mmu_mark_parents_unsync(struct kvm_vcpu *vcpu,
+					struct kvm_mmu_page *sp)
+{
+	mmu_parent_walk(vcpu, sp, unsync_walk_fn);
+	kvm_mmu_update_parents_unsync(sp);
+}
+
 static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
 				    struct kvm_mmu_page *sp)
 {
@@ -868,6 +949,58 @@ static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
 		sp->spt[i] = shadow_trap_nonpresent_pte;
 }
 
+static int nonpaging_sync_page(struct kvm_vcpu *vcpu,
+			       struct kvm_mmu_page *sp)
+{
+	return 1;
+}
+
+static void nonpaging_invlpg(struct kvm_vcpu *vcpu, gva_t gva)
+{
+}
+
+#define for_each_unsync_children(bitmap, idx)		\
+	for (idx = find_first_bit(bitmap, 512);		\
+	     idx < 512;					\
+	     idx = find_next_bit(bitmap, 512, idx+1))
+
+static int mmu_unsync_walk(struct kvm_mmu_page *sp,
+			   struct kvm_unsync_walk *walker)
+{
+	int i, ret;
+
+	if (!sp->unsync_children)
+		return 0;
+
+	for_each_unsync_children(sp->unsync_child_bitmap, i) {
+		u64 ent = sp->spt[i];
+
+		if (is_shadow_present_pte(ent)) {
+			struct kvm_mmu_page *child;
+			child = page_header(ent & PT64_BASE_ADDR_MASK);
+
+			if (child->unsync_children) {
+				ret = mmu_unsync_walk(child, walker);
+				if (ret)
+					return ret;
+				__clear_bit(i, sp->unsync_child_bitmap);
+			}
+
+			if (child->unsync) {
+				ret = walker->entry(child, walker);
+				__clear_bit(i, sp->unsync_child_bitmap);
+				if (ret)
+					return ret;
+			}
+		}
+	}
+
+	if (find_first_bit(sp->unsync_child_bitmap, 512) == 512)
+		sp->unsync_children = 0;
+
+	return 0;
+}
+
 static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm *kvm, gfn_t gfn)
 {
 	unsigned index;
@@ -888,6 +1021,59 @@ static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm *kvm, gfn_t gfn)
 	return NULL;
 }
 
+static void kvm_unlink_unsync_page(struct kvm *kvm, struct kvm_mmu_page *sp)
+{
+	WARN_ON(!sp->unsync);
+	sp->unsync = 0;
+	--kvm->stat.mmu_unsync;
+}
+
+static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp);
+
+static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
+{
+	if (sp->role.glevels != vcpu->arch.mmu.root_level) {
+		kvm_mmu_zap_page(vcpu->kvm, sp);
+		return 1;
+	}
+
+	rmap_write_protect(vcpu->kvm, sp->gfn);
+	if (vcpu->arch.mmu.sync_page(vcpu, sp)) {
+		kvm_mmu_zap_page(vcpu->kvm, sp);
+		return 1;
+	}
+
+	kvm_mmu_flush_tlb(vcpu);
+	kvm_unlink_unsync_page(vcpu->kvm, sp);
+	return 0;
+}
+
+struct sync_walker {
+	struct kvm_vcpu *vcpu;
+	struct kvm_unsync_walk walker;
+};
+
+static int mmu_sync_fn(struct kvm_mmu_page *sp, struct kvm_unsync_walk *walk)
+{
+	struct sync_walker *sync_walk = container_of(walk, struct sync_walker,
+						     walker);
+	struct kvm_vcpu *vcpu = sync_walk->vcpu;
+
+	kvm_sync_page(vcpu, sp);
+	return (need_resched() || spin_needbreak(&vcpu->kvm->mmu_lock));
+}
+
+static void mmu_sync_children(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
+{
+	struct sync_walker walker = {
+		.walker = { .entry = mmu_sync_fn, },
+		.vcpu = vcpu,
+	};
+
+	while (mmu_unsync_walk(sp, &walker.walker))
+		cond_resched_lock(&vcpu->kvm->mmu_lock);
+}
+
 static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 					     gfn_t gfn,
 					     gva_t gaddr,
@@ -901,7 +1087,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	unsigned quadrant;
 	struct hlist_head *bucket;
 	struct kvm_mmu_page *sp;
-	struct hlist_node *node;
+	struct hlist_node *node, *tmp;
 
 	role.word = 0;
 	role.glevels = vcpu->arch.mmu.root_level;
@@ -917,9 +1103,20 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 		 gfn, role.word);
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
-	hlist_for_each_entry(sp, node, bucket, hash_link)
-		if (sp->gfn == gfn && sp->role.word == role.word) {
+	hlist_for_each_entry_safe(sp, node, tmp, bucket, hash_link)
+		if (sp->gfn == gfn) {
+			if (sp->unsync)
+				if (kvm_sync_page(vcpu, sp))
+					continue;
+
+			if (sp->role.word != role.word)
+				continue;
+
 			mmu_page_add_parent_pte(vcpu, sp, parent_pte);
+			if (sp->unsync_children) {
+				set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
+				kvm_mmu_mark_parents_unsync(vcpu, sp);
+			}
 			pgprintk("%s: found\n", __func__);
 			return sp;
 		}
@@ -931,8 +1128,10 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	sp->gfn = gfn;
 	sp->role = role;
 	hlist_add_head(&sp->hash_link, bucket);
-	if (!metaphysical)
+	if (!metaphysical) {
 		rmap_write_protect(vcpu->kvm, gfn);
+		account_shadowed(vcpu->kvm, gfn);
+	}
 	if (shadow_trap_nonpresent_pte != shadow_notrap_nonpresent_pte)
 		vcpu->arch.mmu.prefetch_page(vcpu, sp);
 	else
@@ -940,6 +1139,35 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	return sp;
 }
 
+static int walk_shadow(struct kvm_shadow_walk *walker,
+		       struct kvm_vcpu *vcpu, u64 addr)
+{
+	hpa_t shadow_addr;
+	int level;
+	int r;
+	u64 *sptep;
+	unsigned index;
+
+	shadow_addr = vcpu->arch.mmu.root_hpa;
+	level = vcpu->arch.mmu.shadow_root_level;
+	if (level == PT32E_ROOT_LEVEL) {
+		shadow_addr = vcpu->arch.mmu.pae_root[(addr >> 30) & 3];
+		shadow_addr &= PT64_BASE_ADDR_MASK;
+		--level;
+	}
+
+	while (level >= PT_PAGE_TABLE_LEVEL) {
+		index = SHADOW_PT_INDEX(addr, level);
+		sptep = ((u64 *)__va(shadow_addr)) + index;
+		r = walker->entry(walker, vcpu, addr, sptep, level);
+		if (r)
+			return r;
+		shadow_addr = *sptep & PT64_BASE_ADDR_MASK;
+		--level;
+	}
+	return 0;
+}
+
 static void kvm_mmu_page_unlink_children(struct kvm *kvm,
 					 struct kvm_mmu_page *sp)
 {
@@ -955,7 +1183,6 @@ static void kvm_mmu_page_unlink_children(struct kvm *kvm,
 				rmap_remove(kvm, &pt[i]);
 			pt[i] = shadow_trap_nonpresent_pte;
 		}
-		kvm_flush_remote_tlbs(kvm);
 		return;
 	}
 
@@ -974,7 +1201,6 @@ static void kvm_mmu_page_unlink_children(struct kvm *kvm,
 		}
 		pt[i] = shadow_trap_nonpresent_pte;
 	}
-	kvm_flush_remote_tlbs(kvm);
 }
 
 static void kvm_mmu_put_page(struct kvm_mmu_page *sp, u64 *parent_pte)
@@ -991,11 +1217,10 @@ static void kvm_mmu_reset_last_pte_updated(struct kvm *kvm)
 			kvm->vcpus[i]->arch.last_pte_updated = NULL;
 }
 
-static void kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
+static void kvm_mmu_unlink_parents(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	u64 *parent_pte;
 
-	++kvm->stat.mmu_shadow_zapped;
 	while (sp->multimapped || sp->parent_pte) {
 		if (!sp->multimapped)
 			parent_pte = sp->parent_pte;
@@ -1010,21 +1235,59 @@ static void kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 		kvm_mmu_put_page(sp, parent_pte);
 		set_shadow_pte(parent_pte, shadow_trap_nonpresent_pte);
 	}
+}
+
+struct zap_walker {
+	struct kvm_unsync_walk walker;
+	struct kvm *kvm;
+	int zapped;
+};
+
+static int mmu_zap_fn(struct kvm_mmu_page *sp, struct kvm_unsync_walk *walk)
+{
+	struct zap_walker *zap_walk = container_of(walk, struct zap_walker,
+						     walker);
+	kvm_mmu_zap_page(zap_walk->kvm, sp);
+	zap_walk->zapped = 1;
+	return 0;
+}
+
+static int mmu_zap_unsync_children(struct kvm *kvm, struct kvm_mmu_page *sp)
+{
+	struct zap_walker walker = {
+		.walker = { .entry = mmu_zap_fn, },
+		.kvm = kvm,
+		.zapped = 0,
+	};
+
+	if (sp->role.level == PT_PAGE_TABLE_LEVEL)
+		return 0;
+	mmu_unsync_walk(sp, &walker.walker);
+	return walker.zapped;
+}
+
+static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
+{
+	int ret;
+	++kvm->stat.mmu_shadow_zapped;
+	ret = mmu_zap_unsync_children(kvm, sp);
 	kvm_mmu_page_unlink_children(kvm, sp);
+	kvm_mmu_unlink_parents(kvm, sp);
+	kvm_flush_remote_tlbs(kvm);
+	if (!sp->role.invalid && !sp->role.metaphysical)
+		unaccount_shadowed(kvm, sp->gfn);
+	if (sp->unsync)
+		kvm_unlink_unsync_page(kvm, sp);
 	if (!sp->root_count) {
-		if (!sp->role.metaphysical && !sp->role.invalid)
-			unaccount_shadowed(kvm, sp->gfn);
 		hlist_del(&sp->hash_link);
 		kvm_mmu_free_page(kvm, sp);
 	} else {
-		int invalid = sp->role.invalid;
-		list_move(&sp->link, &kvm->arch.active_mmu_pages);
 		sp->role.invalid = 1;
+		list_move(&sp->link, &kvm->arch.active_mmu_pages);
 		kvm_reload_remote_mmus(kvm);
-		if (!sp->role.metaphysical && !invalid)
-			unaccount_shadowed(kvm, sp->gfn);
 	}
 	kvm_mmu_reset_last_pte_updated(kvm);
+	return ret;
 }
 
 /*
@@ -1077,8 +1340,9 @@ static int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn)
 		if (sp->gfn == gfn && !sp->role.metaphysical) {
 			pgprintk("%s: gfn %lx role %x\n", __func__, gfn,
 				 sp->role.word);
-			kvm_mmu_zap_page(kvm, sp);
 			r = 1;
+			if (kvm_mmu_zap_page(kvm, sp))
+				n = bucket->first;
 		}
 	return r;
 }
@@ -1101,6 +1365,20 @@ static void page_header_update_slot(struct kvm *kvm, void *pte, gfn_t gfn)
 	__set_bit(slot, &sp->slot_bitmap);
 }
 
+static void mmu_convert_notrap(struct kvm_mmu_page *sp)
+{
+	int i;
+	u64 *pt = sp->spt;
+
+	if (shadow_trap_nonpresent_pte == shadow_notrap_nonpresent_pte)
+		return;
+
+	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
+		if (pt[i] == shadow_notrap_nonpresent_pte)
+			set_shadow_pte(&pt[i], shadow_trap_nonpresent_pte);
+	}
+}
+
 struct page *gva_to_page(struct kvm_vcpu *vcpu, gva_t gva)
 {
 	struct page *page;
@@ -1110,51 +1388,60 @@ struct page *gva_to_page(struct kvm_vcpu *vcpu, gva_t gva)
 	if (gpa == UNMAPPED_GVA)
 		return NULL;
 
-	down_read(&current->mm->mmap_sem);
 	page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
-	up_read(&current->mm->mmap_sem);
 
 	return page;
 }
 
-static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
-			 unsigned pt_access, unsigned pte_access,
-			 int user_fault, int write_fault, int dirty,
-			 int *ptwrite, int largepage, gfn_t gfn,
-			 pfn_t pfn, bool speculative)
+static int kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 {
-	u64 spte;
-	int was_rmapped = 0;
-	int was_writeble = is_writeble_pte(*shadow_pte);
+	unsigned index;
+	struct hlist_head *bucket;
+	struct kvm_mmu_page *s;
+	struct hlist_node *node, *n;
 
-	pgprintk("%s: spte %llx access %x write_fault %d"
-		 " user_fault %d gfn %lx\n",
-		 __func__, *shadow_pte, pt_access,
-		 write_fault, user_fault, gfn);
+	index = kvm_page_table_hashfn(sp->gfn);
+	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
+	/* don't unsync if pagetable is shadowed with multiple roles */
+	hlist_for_each_entry_safe(s, node, n, bucket, hash_link) {
+		if (s->gfn != sp->gfn || s->role.metaphysical)
+			continue;
+		if (s->role.word != sp->role.word)
+			return 1;
+	}
+	kvm_mmu_mark_parents_unsync(vcpu, sp);
+	++vcpu->kvm->stat.mmu_unsync;
+	sp->unsync = 1;
+	mmu_convert_notrap(sp);
+	return 0;
+}
 
-	if (is_rmap_pte(*shadow_pte)) {
-		/*
-		 * If we overwrite a PTE page pointer with a 2MB PMD, unlink
-		 * the parent of the now unreachable PTE.
-		 */
-		if (largepage && !is_large_pte(*shadow_pte)) {
-			struct kvm_mmu_page *child;
-			u64 pte = *shadow_pte;
+static int mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn,
+				  bool can_unsync)
+{
+	struct kvm_mmu_page *shadow;
 
-			child = page_header(pte & PT64_BASE_ADDR_MASK);
-			mmu_page_remove_parent_pte(child, shadow_pte);
-		} else if (pfn != spte_to_pfn(*shadow_pte)) {
-			pgprintk("hfn old %lx new %lx\n",
-				 spte_to_pfn(*shadow_pte), pfn);
-			rmap_remove(vcpu->kvm, shadow_pte);
-		} else {
-			if (largepage)
-				was_rmapped = is_large_pte(*shadow_pte);
-			else
-				was_rmapped = 1;
-		}
+	shadow = kvm_mmu_lookup_page(vcpu->kvm, gfn);
+	if (shadow) {
+		if (shadow->role.level != PT_PAGE_TABLE_LEVEL)
+			return 1;
+		if (shadow->unsync)
+			return 0;
+		if (can_unsync && oos_shadow)
+			return kvm_unsync_page(vcpu, shadow);
+		return 1;
 	}
+	return 0;
+}
 
+static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
+		    unsigned pte_access, int user_fault,
+		    int write_fault, int dirty, int largepage,
+		    gfn_t gfn, pfn_t pfn, bool speculative,
+		    bool can_unsync)
+{
+	u64 spte;
+	int ret = 0;
 	/*
 	 * We don't set the accessed bit, since we sometimes want to see
 	 * whether the guest actually used the pte (in order to detect
@@ -1162,7 +1449,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 	 */
 	spte = shadow_base_present_pte | shadow_dirty_mask;
 	if (!speculative)
-		pte_access |= PT_ACCESSED_MASK;
+		spte |= shadow_accessed_mask;
 	if (!dirty)
 		pte_access &= ~ACC_WRITE_MASK;
 	if (pte_access & ACC_EXEC_MASK)
@@ -1178,35 +1465,82 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 
 	if ((pte_access & ACC_WRITE_MASK)
 	    || (write_fault && !is_write_protection(vcpu) && !user_fault)) {
-		struct kvm_mmu_page *shadow;
+
+		if (largepage && has_wrprotected_page(vcpu->kvm, gfn)) {
+			ret = 1;
+			spte = shadow_trap_nonpresent_pte;
+			goto set_pte;
+		}
 
 		spte |= PT_WRITABLE_MASK;
 
-		shadow = kvm_mmu_lookup_page(vcpu->kvm, gfn);
-		if (shadow ||
-		   (largepage && has_wrprotected_page(vcpu->kvm, gfn))) {
+		if (mmu_need_write_protect(vcpu, gfn, can_unsync)) {
 			pgprintk("%s: found shadow page for %lx, marking ro\n",
 				 __func__, gfn);
+			ret = 1;
 			pte_access &= ~ACC_WRITE_MASK;
-			if (is_writeble_pte(spte)) {
+			if (is_writeble_pte(spte))
 				spte &= ~PT_WRITABLE_MASK;
-				kvm_x86_ops->tlb_flush(vcpu);
-			}
-			if (write_fault)
-				*ptwrite = 1;
 		}
 	}
 
 	if (pte_access & ACC_WRITE_MASK)
 		mark_page_dirty(vcpu->kvm, gfn);
 
-	pgprintk("%s: setting spte %llx\n", __func__, spte);
-	pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
-		 (spte&PT_PAGE_SIZE_MASK)? "2MB" : "4kB",
-		 (spte&PT_WRITABLE_MASK)?"RW":"R", gfn, spte, shadow_pte);
+set_pte:
 	set_shadow_pte(shadow_pte, spte);
-	if (!was_rmapped && (spte & PT_PAGE_SIZE_MASK)
-	    && (spte & PT_PRESENT_MASK))
+	return ret;
+}
+
+static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
+			 unsigned pt_access, unsigned pte_access,
+			 int user_fault, int write_fault, int dirty,
+			 int *ptwrite, int largepage, gfn_t gfn,
+			 pfn_t pfn, bool speculative)
+{
+	int was_rmapped = 0;
+	int was_writeble = is_writeble_pte(*shadow_pte);
+
+	pgprintk("%s: spte %llx access %x write_fault %d"
+		 " user_fault %d gfn %lx\n",
+		 __func__, *shadow_pte, pt_access,
+		 write_fault, user_fault, gfn);
+
+	if (is_rmap_pte(*shadow_pte)) {
+		/*
+		 * If we overwrite a PTE page pointer with a 2MB PMD, unlink
+		 * the parent of the now unreachable PTE.
+		 */
+		if (largepage && !is_large_pte(*shadow_pte)) {
+			struct kvm_mmu_page *child;
+			u64 pte = *shadow_pte;
+
+			child = page_header(pte & PT64_BASE_ADDR_MASK);
+			mmu_page_remove_parent_pte(child, shadow_pte);
+		} else if (pfn != spte_to_pfn(*shadow_pte)) {
+			pgprintk("hfn old %lx new %lx\n",
+				 spte_to_pfn(*shadow_pte), pfn);
+			rmap_remove(vcpu->kvm, shadow_pte);
+		} else {
+			if (largepage)
+				was_rmapped = is_large_pte(*shadow_pte);
+			else
+				was_rmapped = 1;
+		}
+	}
+	if (set_spte(vcpu, shadow_pte, pte_access, user_fault, write_fault,
+		      dirty, largepage, gfn, pfn, speculative, true)) {
+		if (write_fault)
+			*ptwrite = 1;
+		kvm_x86_ops->tlb_flush(vcpu);
+	}
+
+	pgprintk("%s: setting spte %llx\n", __func__, *shadow_pte);
+	pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
+		 is_large_pte(*shadow_pte)? "2MB" : "4kB",
+		 is_present_pte(*shadow_pte)?"RW":"R", gfn,
+		 *shadow_pte, shadow_pte);
+	if (!was_rmapped && is_large_pte(*shadow_pte))
 		++vcpu->kvm->stat.lpages;
 
 	page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
@@ -1230,54 +1564,67 @@ static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
 {
 }
 
-static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
-			   int largepage, gfn_t gfn, pfn_t pfn,
-			   int level)
-{
-	hpa_t table_addr = vcpu->arch.mmu.root_hpa;
-	int pt_write = 0;
-
-	for (; ; level--) {
-		u32 index = PT64_INDEX(v, level);
-		u64 *table;
-
-		ASSERT(VALID_PAGE(table_addr));
-		table = __va(table_addr);
+struct direct_shadow_walk {
+	struct kvm_shadow_walk walker;
+	pfn_t pfn;
+	int write;
+	int largepage;
+	int pt_write;
+};
 
-		if (level == 1) {
-			mmu_set_spte(vcpu, &table[index], ACC_ALL, ACC_ALL,
-				     0, write, 1, &pt_write, 0, gfn, pfn, false);
-			return pt_write;
-		}
+static int direct_map_entry(struct kvm_shadow_walk *_walk,
+			    struct kvm_vcpu *vcpu,
+			    u64 addr, u64 *sptep, int level)
+{
+	struct direct_shadow_walk *walk =
+		container_of(_walk, struct direct_shadow_walk, walker);
+	struct kvm_mmu_page *sp;
+	gfn_t pseudo_gfn;
+	gfn_t gfn = addr >> PAGE_SHIFT;
+
+	if (level == PT_PAGE_TABLE_LEVEL
+	    || (walk->largepage && level == PT_DIRECTORY_LEVEL)) {
+		mmu_set_spte(vcpu, sptep, ACC_ALL, ACC_ALL,
+			     0, walk->write, 1, &walk->pt_write,
+			     walk->largepage, gfn, walk->pfn, false);
+		++vcpu->stat.pf_fixed;
+		return 1;
+	}
 
-		if (largepage && level == 2) {
-			mmu_set_spte(vcpu, &table[index], ACC_ALL, ACC_ALL,
-				     0, write, 1, &pt_write, 1, gfn, pfn, false);
-			return pt_write;
+	if (*sptep == shadow_trap_nonpresent_pte) {
+		pseudo_gfn = (addr & PT64_DIR_BASE_ADDR_MASK) >> PAGE_SHIFT;
+		sp = kvm_mmu_get_page(vcpu, pseudo_gfn, (gva_t)addr, level - 1,
+				      1, ACC_ALL, sptep);
+		if (!sp) {
+			pgprintk("nonpaging_map: ENOMEM\n");
+			kvm_release_pfn_clean(walk->pfn);
+			return -ENOMEM;
 		}
 
-		if (table[index] == shadow_trap_nonpresent_pte) {
-			struct kvm_mmu_page *new_table;
-			gfn_t pseudo_gfn;
-
-			pseudo_gfn = (v & PT64_DIR_BASE_ADDR_MASK)
-				>> PAGE_SHIFT;
-			new_table = kvm_mmu_get_page(vcpu, pseudo_gfn,
-						     v, level - 1,
-						     1, ACC_ALL, &table[index]);
-			if (!new_table) {
-				pgprintk("nonpaging_map: ENOMEM\n");
-				kvm_release_pfn_clean(pfn);
-				return -ENOMEM;
-			}
-
-			set_shadow_pte(&table[index],
-				       __pa(new_table->spt)
-				       | PT_PRESENT_MASK | PT_WRITABLE_MASK
-				       | shadow_user_mask | shadow_x_mask);
-		}
-		table_addr = table[index] & PT64_BASE_ADDR_MASK;
+		set_shadow_pte(sptep,
+			       __pa(sp->spt)
+			       | PT_PRESENT_MASK | PT_WRITABLE_MASK
+			       | shadow_user_mask | shadow_x_mask);
 	}
+	return 0;
+}
+
+static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
+			int largepage, gfn_t gfn, pfn_t pfn)
+{
+	int r;
+	struct direct_shadow_walk walker = {
+		.walker = { .entry = direct_map_entry, },
+		.pfn = pfn,
+		.largepage = largepage,
+		.write = write,
+		.pt_write = 0,
+	};
+
+	r = walk_shadow(&walker.walker, vcpu, gfn << PAGE_SHIFT);
+	if (r < 0)
+		return r;
+	return walker.pt_write;
 }
 
 static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
@@ -1287,16 +1634,14 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	pfn_t pfn;
 	unsigned long mmu_seq;
 
-	down_read(&current->mm->mmap_sem);
 	if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		largepage = 1;
 	}
 
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
-	/* implicit mb(), we'll read before PT lock is unlocked */
+	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
-	up_read(&current->mm->mmap_sem);
 
 	/* mmio */
 	if (is_error_pfn(pfn)) {
@@ -1308,8 +1653,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	if (mmu_notifier_retry(vcpu, mmu_seq))
 		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
-	r = __direct_map(vcpu, v, write, largepage, gfn, pfn,
-			 PT32E_ROOT_LEVEL);
+	r = __direct_map(vcpu, v, write, largepage, gfn, pfn);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 
@@ -1405,6 +1749,37 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
 	vcpu->arch.mmu.root_hpa = __pa(vcpu->arch.mmu.pae_root);
 }
 
+static void mmu_sync_roots(struct kvm_vcpu *vcpu)
+{
+	int i;
+	struct kvm_mmu_page *sp;
+
+	if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
+		return;
+	if (vcpu->arch.mmu.shadow_root_level == PT64_ROOT_LEVEL) {
+		hpa_t root = vcpu->arch.mmu.root_hpa;
+		sp = page_header(root);
+		mmu_sync_children(vcpu, sp);
+		return;
+	}
+	for (i = 0; i < 4; ++i) {
+		hpa_t root = vcpu->arch.mmu.pae_root[i];
+
+		if (root) {
+			root &= PT64_BASE_ADDR_MASK;
+			sp = page_header(root);
+			mmu_sync_children(vcpu, sp);
+		}
+	}
+}
+
+void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu)
+{
+	spin_lock(&vcpu->kvm->mmu_lock);
+	mmu_sync_roots(vcpu);
+	spin_unlock(&vcpu->kvm->mmu_lock);
+}
+
 static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gva_t vaddr)
 {
 	return vaddr;
@@ -1446,15 +1821,13 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	if (r)
 		return r;
 
-	down_read(&current->mm->mmap_sem);
 	if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		largepage = 1;
 	}
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
-	/* implicit mb(), we'll read before PT lock is unlocked */
+	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
-	up_read(&current->mm->mmap_sem);
 	if (is_error_pfn(pfn)) {
 		kvm_release_pfn_clean(pfn);
 		return 1;
@@ -1464,7 +1837,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK,
-			 largepage, gfn, pfn, kvm_x86_ops->get_tdp_level());
+			 largepage, gfn, pfn);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return r;
@@ -1489,6 +1862,8 @@ static int nonpaging_init_context(struct kvm_vcpu *vcpu)
 	context->gva_to_gpa = nonpaging_gva_to_gpa;
 	context->free = nonpaging_free;
 	context->prefetch_page = nonpaging_prefetch_page;
+	context->sync_page = nonpaging_sync_page;
+	context->invlpg = nonpaging_invlpg;
 	context->root_level = 0;
 	context->shadow_root_level = PT32E_ROOT_LEVEL;
 	context->root_hpa = INVALID_PAGE;
@@ -1536,6 +1911,8 @@ static int paging64_init_context_common(struct kvm_vcpu *vcpu, int level)
 	context->page_fault = paging64_page_fault;
 	context->gva_to_gpa = paging64_gva_to_gpa;
 	context->prefetch_page = paging64_prefetch_page;
+	context->sync_page = paging64_sync_page;
+	context->invlpg = paging64_invlpg;
 	context->free = paging_free;
 	context->root_level = level;
 	context->shadow_root_level = level;
@@ -1557,6 +1934,8 @@ static int paging32_init_context(struct kvm_vcpu *vcpu)
 	context->gva_to_gpa = paging32_gva_to_gpa;
 	context->free = paging_free;
 	context->prefetch_page = paging32_prefetch_page;
+	context->sync_page = paging32_sync_page;
+	context->invlpg = paging32_invlpg;
 	context->root_level = PT32_ROOT_LEVEL;
 	context->shadow_root_level = PT32E_ROOT_LEVEL;
 	context->root_hpa = INVALID_PAGE;
@@ -1576,6 +1955,8 @@ static int init_kvm_tdp_mmu(struct kvm_vcpu *vcpu)
 	context->page_fault = tdp_page_fault;
 	context->free = nonpaging_free;
 	context->prefetch_page = nonpaging_prefetch_page;
+	context->sync_page = nonpaging_sync_page;
+	context->invlpg = nonpaging_invlpg;
 	context->shadow_root_level = kvm_x86_ops->get_tdp_level();
 	context->root_hpa = INVALID_PAGE;
 
@@ -1647,6 +2028,7 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
 	spin_lock(&vcpu->kvm->mmu_lock);
 	kvm_mmu_free_some_pages(vcpu);
 	mmu_alloc_roots(vcpu);
+	mmu_sync_roots(vcpu);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 	kvm_x86_ops->set_cr3(vcpu, vcpu->arch.mmu.root_hpa);
 	kvm_mmu_flush_tlb(vcpu);
@@ -1767,15 +2149,13 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		return;
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
-	down_read(&current->mm->mmap_sem);
 	if (is_large_pte(gpte) && is_largepage_backed(vcpu, gfn)) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		vcpu->arch.update_pte.largepage = 1;
 	}
 	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
-	/* implicit mb(), we'll read before PT lock is unlocked */
+	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
-	up_read(&current->mm->mmap_sem);
 
 	if (is_error_pfn(pfn)) {
 		kvm_release_pfn_clean(pfn);
@@ -1837,7 +2217,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
 	hlist_for_each_entry_safe(sp, node, n, bucket, hash_link) {
-		if (sp->gfn != gfn || sp->role.metaphysical)
+		if (sp->gfn != gfn || sp->role.metaphysical || sp->role.invalid)
 			continue;
 		pte_size = sp->role.glevels == PT32_ROOT_LEVEL ? 4 : 8;
 		misaligned = (offset ^ (offset + bytes - 1)) & ~(pte_size - 1);
@@ -1855,7 +2235,8 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 			 */
 			pgprintk("misaligned: gpa %llx bytes %d role %x\n",
 				 gpa, bytes, sp->role.word);
-			kvm_mmu_zap_page(vcpu->kvm, sp);
+			if (kvm_mmu_zap_page(vcpu->kvm, sp))
+				n = bucket->first;
 			++vcpu->kvm->stat.mmu_flooded;
 			continue;
 		}
@@ -1969,6 +2350,16 @@ out:
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_page_fault);
 
+void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva)
+{
+	spin_lock(&vcpu->kvm->mmu_lock);
+	vcpu->arch.mmu.invlpg(vcpu, gva);
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_mmu_flush_tlb(vcpu);
+	++vcpu->stat.invlpg;
+}
+EXPORT_SYMBOL_GPL(kvm_mmu_invlpg);
+
 void kvm_enable_tdp(void)
 {
 	tdp_enabled = true;
@@ -2055,6 +2446,7 @@ void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot)
 {
 	struct kvm_mmu_page *sp;
 
+	spin_lock(&kvm->mmu_lock);
 	list_for_each_entry(sp, &kvm->arch.active_mmu_pages, link) {
 		int i;
 		u64 *pt;
@@ -2068,6 +2460,8 @@ void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot)
 			if (pt[i] & PT_WRITABLE_MASK)
 				pt[i] &= ~PT_WRITABLE_MASK;
 	}
+	kvm_flush_remote_tlbs(kvm);
+	spin_unlock(&kvm->mmu_lock);
 }
 
 void kvm_mmu_zap_all(struct kvm *kvm)
@@ -2076,7 +2470,9 @@ void kvm_mmu_zap_all(struct kvm *kvm)
 
 	spin_lock(&kvm->mmu_lock);
 	list_for_each_entry_safe(sp, node, &kvm->arch.active_mmu_pages, link)
-		kvm_mmu_zap_page(kvm, sp);
+		if (kvm_mmu_zap_page(kvm, sp))
+			node = container_of(kvm->arch.active_mmu_pages.next,
+					    struct kvm_mmu_page, link);
 	spin_unlock(&kvm->mmu_lock);
 
 	kvm_flush_remote_tlbs(kvm);
@@ -2291,18 +2687,18 @@ int kvm_pv_mmu_op(struct kvm_vcpu *vcpu, unsigned long bytes,
 		  gpa_t addr, unsigned long *ret)
 {
 	int r;
-	struct kvm_pv_mmu_op_buffer buffer;
+	struct kvm_pv_mmu_op_buffer *buffer = &vcpu->arch.mmu_op_buffer;
 
-	buffer.ptr = buffer.buf;
-	buffer.len = min_t(unsigned long, bytes, sizeof buffer.buf);
-	buffer.processed = 0;
+	buffer->ptr = buffer->buf;
+	buffer->len = min_t(unsigned long, bytes, sizeof buffer->buf);
+	buffer->processed = 0;
 
-	r = kvm_read_guest(vcpu->kvm, addr, buffer.buf, buffer.len);
+	r = kvm_read_guest(vcpu->kvm, addr, buffer->buf, buffer->len);
 	if (r)
 		goto out;
 
-	while (buffer.len) {
-		r = kvm_pv_mmu_op_one(vcpu, &buffer);
+	while (buffer->len) {
+		r = kvm_pv_mmu_op_one(vcpu, buffer);
 		if (r < 0)
 			goto out;
 		if (r == 0)
@@ -2311,7 +2707,7 @@ int kvm_pv_mmu_op(struct kvm_vcpu *vcpu, unsigned long bytes,
 
 	r = 1;
 out:
-	*ret = buffer.processed;
+	*ret = buffer->processed;
 	return r;
 }
 
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 4a814bf..613ec9a 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -25,11 +25,11 @@
 #if PTTYPE == 64
 	#define pt_element_t u64
 	#define guest_walker guest_walker64
+	#define shadow_walker shadow_walker64
 	#define FNAME(name) paging##64_##name
 	#define PT_BASE_ADDR_MASK PT64_BASE_ADDR_MASK
 	#define PT_DIR_BASE_ADDR_MASK PT64_DIR_BASE_ADDR_MASK
 	#define PT_INDEX(addr, level) PT64_INDEX(addr, level)
-	#define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
 	#define PT_LEVEL_MASK(level) PT64_LEVEL_MASK(level)
 	#define PT_LEVEL_BITS PT64_LEVEL_BITS
 	#ifdef CONFIG_X86_64
@@ -42,11 +42,11 @@
 #elif PTTYPE == 32
 	#define pt_element_t u32
 	#define guest_walker guest_walker32
+	#define shadow_walker shadow_walker32
 	#define FNAME(name) paging##32_##name
 	#define PT_BASE_ADDR_MASK PT32_BASE_ADDR_MASK
 	#define PT_DIR_BASE_ADDR_MASK PT32_DIR_BASE_ADDR_MASK
 	#define PT_INDEX(addr, level) PT32_INDEX(addr, level)
-	#define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
 	#define PT_LEVEL_MASK(level) PT32_LEVEL_MASK(level)
 	#define PT_LEVEL_BITS PT32_LEVEL_BITS
 	#define PT_MAX_FULL_LEVELS 2
@@ -73,6 +73,17 @@ struct guest_walker {
 	u32 error_code;
 };
 
+struct shadow_walker {
+	struct kvm_shadow_walk walker;
+	struct guest_walker *guest_walker;
+	int user_fault;
+	int write_fault;
+	int largepage;
+	int *ptwrite;
+	pfn_t pfn;
+	u64 *sptep;
+};
+
 static gfn_t gpte_to_gfn(pt_element_t gpte)
 {
 	return (gpte & PT_BASE_ADDR_MASK) >> PAGE_SHIFT;
@@ -91,14 +102,10 @@ static bool FNAME(cmpxchg_gpte)(struct kvm *kvm,
 	pt_element_t *table;
 	struct page *page;
 
-	down_read(&current->mm->mmap_sem);
 	page = gfn_to_page(kvm, table_gfn);
-	up_read(&current->mm->mmap_sem);
 
 	table = kmap_atomic(page, KM_USER0);
-
 	ret = CMPXCHG(&table[index], orig_pte, new_pte);
-
 	kunmap_atomic(table, KM_USER0);
 
 	kvm_release_page_dirty(page);
@@ -274,86 +281,89 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 /*
  * Fetch a shadow pte for a specific level in the paging hierarchy.
  */
-static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
-			 struct guest_walker *walker,
-			 int user_fault, int write_fault, int largepage,
-			 int *ptwrite, pfn_t pfn)
+static int FNAME(shadow_walk_entry)(struct kvm_shadow_walk *_sw,
+				    struct kvm_vcpu *vcpu, u64 addr,
+				    u64 *sptep, int level)
 {
-	hpa_t shadow_addr;
-	int level;
-	u64 *shadow_ent;
-	unsigned access = walker->pt_access;
-
-	if (!is_present_pte(walker->ptes[walker->level - 1]))
-		return NULL;
-
-	shadow_addr = vcpu->arch.mmu.root_hpa;
-	level = vcpu->arch.mmu.shadow_root_level;
-	if (level == PT32E_ROOT_LEVEL) {
-		shadow_addr = vcpu->arch.mmu.pae_root[(addr >> 30) & 3];
-		shadow_addr &= PT64_BASE_ADDR_MASK;
-		--level;
+	struct shadow_walker *sw =
+		container_of(_sw, struct shadow_walker, walker);
+	struct guest_walker *gw = sw->guest_walker;
+	unsigned access = gw->pt_access;
+	struct kvm_mmu_page *shadow_page;
+	u64 spte;
+	int metaphysical;
+	gfn_t table_gfn;
+	int r;
+	pt_element_t curr_pte;
+
+	if (level == PT_PAGE_TABLE_LEVEL
+	    || (sw->largepage && level == PT_DIRECTORY_LEVEL)) {
+		mmu_set_spte(vcpu, sptep, access, gw->pte_access & access,
+			     sw->user_fault, sw->write_fault,
+			     gw->ptes[gw->level-1] & PT_DIRTY_MASK,
+			     sw->ptwrite, sw->largepage, gw->gfn, sw->pfn,
+			     false);
+		sw->sptep = sptep;
+		return 1;
 	}
 
-	for (; ; level--) {
-		u32 index = SHADOW_PT_INDEX(addr, level);
-		struct kvm_mmu_page *shadow_page;
-		u64 shadow_pte;
-		int metaphysical;
-		gfn_t table_gfn;
-
-		shadow_ent = ((u64 *)__va(shadow_addr)) + index;
-		if (level == PT_PAGE_TABLE_LEVEL)
-			break;
-
-		if (largepage && level == PT_DIRECTORY_LEVEL)
-			break;
+	if (is_shadow_present_pte(*sptep) && !is_large_pte(*sptep))
+		return 0;
 
-		if (is_shadow_present_pte(*shadow_ent)
-		    && !is_large_pte(*shadow_ent)) {
-			shadow_addr = *shadow_ent & PT64_BASE_ADDR_MASK;
-			continue;
-		}
+	if (is_large_pte(*sptep)) {
+		set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
+		kvm_flush_remote_tlbs(vcpu->kvm);
+		rmap_remove(vcpu->kvm, sptep);
+	}
 
-		if (is_large_pte(*shadow_ent))
-			rmap_remove(vcpu->kvm, shadow_ent);
-
-		if (level - 1 == PT_PAGE_TABLE_LEVEL
-		    && walker->level == PT_DIRECTORY_LEVEL) {
-			metaphysical = 1;
-			if (!is_dirty_pte(walker->ptes[level - 1]))
-				access &= ~ACC_WRITE_MASK;
-			table_gfn = gpte_to_gfn(walker->ptes[level - 1]);
-		} else {
-			metaphysical = 0;
-			table_gfn = walker->table_gfn[level - 2];
-		}
-		shadow_page = kvm_mmu_get_page(vcpu, table_gfn, addr, level-1,
-					       metaphysical, access,
-					       shadow_ent);
-		if (!metaphysical) {
-			int r;
-			pt_element_t curr_pte;
-			r = kvm_read_guest_atomic(vcpu->kvm,
-						  walker->pte_gpa[level - 2],
-						  &curr_pte, sizeof(curr_pte));
-			if (r || curr_pte != walker->ptes[level - 2]) {
-				kvm_release_pfn_clean(pfn);
-				return NULL;
-			}
+	if (level == PT_DIRECTORY_LEVEL && gw->level == PT_DIRECTORY_LEVEL) {
+		metaphysical = 1;
+		if (!is_dirty_pte(gw->ptes[level - 1]))
+			access &= ~ACC_WRITE_MASK;
+		table_gfn = gpte_to_gfn(gw->ptes[level - 1]);
+	} else {
+		metaphysical = 0;
+		table_gfn = gw->table_gfn[level - 2];
+	}
+	shadow_page = kvm_mmu_get_page(vcpu, table_gfn, (gva_t)addr, level-1,
+				       metaphysical, access, sptep);
+	if (!metaphysical) {
+		r = kvm_read_guest_atomic(vcpu->kvm, gw->pte_gpa[level - 2],
+					  &curr_pte, sizeof(curr_pte));
+		if (r || curr_pte != gw->ptes[level - 2]) {
+			kvm_release_pfn_clean(sw->pfn);
+			sw->sptep = NULL;
+			return 1;
 		}
-		shadow_addr = __pa(shadow_page->spt);
-		shadow_pte = shadow_addr | PT_PRESENT_MASK | PT_ACCESSED_MASK
-			| PT_WRITABLE_MASK | PT_USER_MASK;
-		set_shadow_pte(shadow_ent, shadow_pte);
 	}
 
-	mmu_set_spte(vcpu, shadow_ent, access, walker->pte_access & access,
-		     user_fault, write_fault,
-		     walker->ptes[walker->level-1] & PT_DIRTY_MASK,
-		     ptwrite, largepage, walker->gfn, pfn, false);
+	spte = __pa(shadow_page->spt) | PT_PRESENT_MASK | PT_ACCESSED_MASK
+		| PT_WRITABLE_MASK | PT_USER_MASK;
+	*sptep = spte;
+	return 0;
+}
+
+static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
+			 struct guest_walker *guest_walker,
+			 int user_fault, int write_fault, int largepage,
+			 int *ptwrite, pfn_t pfn)
+{
+	struct shadow_walker walker = {
+		.walker = { .entry = FNAME(shadow_walk_entry), },
+		.guest_walker = guest_walker,
+		.user_fault = user_fault,
+		.write_fault = write_fault,
+		.largepage = largepage,
+		.ptwrite = ptwrite,
+		.pfn = pfn,
+	};
+
+	if (!is_present_pte(guest_walker->ptes[guest_walker->level - 1]))
+		return NULL;
+
+	walk_shadow(&walker.walker, vcpu, addr);
 
-	return shadow_ent;
+	return walker.sptep;
 }
 
 /*
@@ -407,7 +417,6 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 		return 0;
 	}
 
-	down_read(&current->mm->mmap_sem);
 	if (walker.level == PT_DIRECTORY_LEVEL) {
 		gfn_t large_gfn;
 		large_gfn = walker.gfn & ~(KVM_PAGES_PER_HPAGE-1);
@@ -417,9 +426,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 		}
 	}
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
-	/* implicit mb(), we'll read before PT lock is unlocked */
+	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, walker.gfn);
-	up_read(&current->mm->mmap_sem);
 
 	/* mmio */
 	if (is_error_pfn(pfn)) {
@@ -453,6 +461,31 @@ out_unlock:
 	return 0;
 }
 
+static int FNAME(shadow_invlpg_entry)(struct kvm_shadow_walk *_sw,
+				      struct kvm_vcpu *vcpu, u64 addr,
+				      u64 *sptep, int level)
+{
+
+	if (level == PT_PAGE_TABLE_LEVEL) {
+		if (is_shadow_present_pte(*sptep))
+			rmap_remove(vcpu->kvm, sptep);
+		set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
+		return 1;
+	}
+	if (!is_shadow_present_pte(*sptep))
+		return 1;
+	return 0;
+}
+
+static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
+{
+	struct shadow_walker walker = {
+		.walker = { .entry = FNAME(shadow_invlpg_entry), },
+	};
+
+	walk_shadow(&walker.walker, vcpu, gva);
+}
+
 static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
 {
 	struct guest_walker walker;
@@ -499,12 +532,66 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 	}
 }
 
+/*
+ * Using the cached information from sp->gfns is safe because:
+ * - The spte has a reference to the struct page, so the pfn for a given gfn
+ *   can't change unless all sptes pointing to it are nuked first.
+ * - Alias changes zap the entire shadow cache.
+ */
+static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
+{
+	int i, offset, nr_present;
+
+	offset = nr_present = 0;
+
+	if (PTTYPE == 32)
+		offset = sp->role.quadrant << PT64_LEVEL_BITS;
+
+	for (i = 0; i < PT64_ENT_PER_PAGE; i++) {
+		unsigned pte_access;
+		pt_element_t gpte;
+		gpa_t pte_gpa;
+		gfn_t gfn = sp->gfns[i];
+
+		if (!is_shadow_present_pte(sp->spt[i]))
+			continue;
+
+		pte_gpa = gfn_to_gpa(sp->gfn);
+		pte_gpa += (i+offset) * sizeof(pt_element_t);
+
+		if (kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &gpte,
+					  sizeof(pt_element_t)))
+			return -EINVAL;
+
+		if (gpte_to_gfn(gpte) != gfn || !is_present_pte(gpte) ||
+		    !(gpte & PT_ACCESSED_MASK)) {
+			u64 nonpresent;
+
+			rmap_remove(vcpu->kvm, &sp->spt[i]);
+			if (is_present_pte(gpte))
+				nonpresent = shadow_trap_nonpresent_pte;
+			else
+				nonpresent = shadow_notrap_nonpresent_pte;
+			set_shadow_pte(&sp->spt[i], nonpresent);
+			continue;
+		}
+
+		nr_present++;
+		pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
+		set_spte(vcpu, &sp->spt[i], pte_access, 0, 0,
+			 is_dirty_pte(gpte), 0, gfn,
+			 spte_to_pfn(sp->spt[i]), true, false);
+	}
+
+	return !nr_present;
+}
+
 #undef pt_element_t
 #undef guest_walker
+#undef shadow_walker
 #undef FNAME
 #undef PT_BASE_ADDR_MASK
 #undef PT_INDEX
-#undef SHADOW_PT_INDEX
 #undef PT_LEVEL_MASK
 #undef PT_DIR_BASE_ADDR_MASK
 #undef PT_LEVEL_BITS
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 8233b86..9c4ce65 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -18,6 +18,7 @@
 #include "kvm_svm.h"
 #include "irq.h"
 #include "mmu.h"
+#include "kvm_cache_regs.h"
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -35,10 +36,6 @@ MODULE_LICENSE("GPL");
 #define IOPM_ALLOC_ORDER 2
 #define MSRPM_ALLOC_ORDER 1
 
-#define DB_VECTOR 1
-#define UD_VECTOR 6
-#define GP_VECTOR 13
-
 #define DR7_GD_MASK (1 << 13)
 #define DR6_BD_MASK (1 << 13)
 
@@ -47,7 +44,7 @@ MODULE_LICENSE("GPL");
 
 #define SVM_FEATURE_NPT  (1 << 0)
 #define SVM_FEATURE_LBRV (1 << 1)
-#define SVM_DEATURE_SVML (1 << 2)
+#define SVM_FEATURE_SVML (1 << 2)
 
 #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
 
@@ -236,13 +233,11 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 		printk(KERN_DEBUG "%s: NOP\n", __func__);
 		return;
 	}
-	if (svm->next_rip - svm->vmcb->save.rip > MAX_INST_SIZE)
-		printk(KERN_ERR "%s: ip 0x%llx next 0x%llx\n",
-		       __func__,
-		       svm->vmcb->save.rip,
-		       svm->next_rip);
+	if (svm->next_rip - kvm_rip_read(vcpu) > MAX_INST_SIZE)
+		printk(KERN_ERR "%s: ip 0x%lx next 0x%llx\n",
+		       __func__, kvm_rip_read(vcpu), svm->next_rip);
 
-	vcpu->arch.rip = svm->vmcb->save.rip = svm->next_rip;
+	kvm_rip_write(vcpu, svm->next_rip);
 	svm->vmcb->control.int_state &= ~SVM_INTERRUPT_SHADOW_MASK;
 
 	vcpu->arch.interrupt_window_open = 1;
@@ -530,6 +525,7 @@ static void init_vmcb(struct vcpu_svm *svm)
 				(1ULL << INTERCEPT_CPUID) |
 				(1ULL << INTERCEPT_INVD) |
 				(1ULL << INTERCEPT_HLT) |
+				(1ULL << INTERCEPT_INVLPG) |
 				(1ULL << INTERCEPT_INVLPGA) |
 				(1ULL << INTERCEPT_IOIO_PROT) |
 				(1ULL << INTERCEPT_MSR_PROT) |
@@ -581,6 +577,7 @@ static void init_vmcb(struct vcpu_svm *svm)
 	save->dr7 = 0x400;
 	save->rflags = 2;
 	save->rip = 0x0000fff0;
+	svm->vcpu.arch.regs[VCPU_REGS_RIP] = save->rip;
 
 	/*
 	 * cr0 val on cpu init should be 0x60000010, we enable cpu
@@ -593,7 +590,8 @@ static void init_vmcb(struct vcpu_svm *svm)
 	if (npt_enabled) {
 		/* Setup VMCB for Nested Paging */
 		control->nested_ctl = 1;
-		control->intercept &= ~(1ULL << INTERCEPT_TASK_SWITCH);
+		control->intercept &= ~((1ULL << INTERCEPT_TASK_SWITCH) |
+					(1ULL << INTERCEPT_INVLPG));
 		control->intercept_exceptions &= ~(1 << PF_VECTOR);
 		control->intercept_cr_read &= ~(INTERCEPT_CR0_MASK|
 						INTERCEPT_CR3_MASK);
@@ -615,10 +613,12 @@ static int svm_vcpu_reset(struct kvm_vcpu *vcpu)
 	init_vmcb(svm);
 
 	if (vcpu->vcpu_id != 0) {
-		svm->vmcb->save.rip = 0;
+		kvm_rip_write(vcpu, 0);
 		svm->vmcb->save.cs.base = svm->vcpu.arch.sipi_vector << 12;
 		svm->vmcb->save.cs.selector = svm->vcpu.arch.sipi_vector << 8;
 	}
+	vcpu->arch.regs_avail = ~0;
+	vcpu->arch.regs_dirty = ~0;
 
 	return 0;
 }
@@ -721,23 +721,6 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu)
 	rdtscll(vcpu->arch.host_tsc);
 }
 
-static void svm_cache_regs(struct kvm_vcpu *vcpu)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-
-	vcpu->arch.regs[VCPU_REGS_RAX] = svm->vmcb->save.rax;
-	vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp;
-	vcpu->arch.rip = svm->vmcb->save.rip;
-}
-
-static void svm_decache_regs(struct kvm_vcpu *vcpu)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-	svm->vmcb->save.rax = vcpu->arch.regs[VCPU_REGS_RAX];
-	svm->vmcb->save.rsp = vcpu->arch.regs[VCPU_REGS_RSP];
-	svm->vmcb->save.rip = vcpu->arch.rip;
-}
-
 static unsigned long svm_get_rflags(struct kvm_vcpu *vcpu)
 {
 	return to_svm(vcpu)->vmcb->save.rflags;
@@ -1040,7 +1023,7 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	if (npt_enabled)
 		svm_flush_tlb(&svm->vcpu);
 
-	if (event_injection)
+	if (!npt_enabled && event_injection)
 		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
@@ -1139,14 +1122,14 @@ static int nop_on_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 
 static int halt_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
-	svm->next_rip = svm->vmcb->save.rip + 1;
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 1;
 	skip_emulated_instruction(&svm->vcpu);
 	return kvm_emulate_halt(&svm->vcpu);
 }
 
 static int vmmcall_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
-	svm->next_rip = svm->vmcb->save.rip + 3;
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 	kvm_emulate_hypercall(&svm->vcpu);
 	return 1;
@@ -1178,11 +1161,18 @@ static int task_switch_interception(struct vcpu_svm *svm,
 
 static int cpuid_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
-	svm->next_rip = svm->vmcb->save.rip + 2;
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
 	kvm_emulate_cpuid(&svm->vcpu);
 	return 1;
 }
 
+static int invlpg_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	if (emulate_instruction(&svm->vcpu, kvm_run, 0, 0, 0) != EMULATE_DONE)
+		pr_unimpl(&svm->vcpu, "%s: failed\n", __func__);
+	return 1;
+}
+
 static int emulate_on_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
@@ -1273,9 +1263,9 @@ static int rdmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 		KVMTRACE_3D(MSR_READ, &svm->vcpu, ecx, (u32)data,
 			    (u32)(data >> 32), handler);
 
-		svm->vmcb->save.rax = data & 0xffffffff;
+		svm->vcpu.arch.regs[VCPU_REGS_RAX] = data & 0xffffffff;
 		svm->vcpu.arch.regs[VCPU_REGS_RDX] = data >> 32;
-		svm->next_rip = svm->vmcb->save.rip + 2;
+		svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
 		skip_emulated_instruction(&svm->vcpu);
 	}
 	return 1;
@@ -1359,13 +1349,13 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 static int wrmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	u32 ecx = svm->vcpu.arch.regs[VCPU_REGS_RCX];
-	u64 data = (svm->vmcb->save.rax & -1u)
+	u64 data = (svm->vcpu.arch.regs[VCPU_REGS_RAX] & -1u)
 		| ((u64)(svm->vcpu.arch.regs[VCPU_REGS_RDX] & -1u) << 32);
 
 	KVMTRACE_3D(MSR_WRITE, &svm->vcpu, ecx, (u32)data, (u32)(data >> 32),
 		    handler);
 
-	svm->next_rip = svm->vmcb->save.rip + 2;
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
 	if (svm_set_msr(&svm->vcpu, ecx, data))
 		kvm_inject_gp(&svm->vcpu, 0);
 	else
@@ -1436,7 +1426,7 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_CPUID]			= cpuid_interception,
 	[SVM_EXIT_INVD]                         = emulate_on_interception,
 	[SVM_EXIT_HLT]				= halt_interception,
-	[SVM_EXIT_INVLPG]			= emulate_on_interception,
+	[SVM_EXIT_INVLPG]			= invlpg_interception,
 	[SVM_EXIT_INVLPGA]			= invalid_op_interception,
 	[SVM_EXIT_IOIO] 		  	= io_interception,
 	[SVM_EXIT_MSR]				= msr_interception,
@@ -1538,6 +1528,7 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 
 	KVMTRACE_1D(INJ_VIRQ, &svm->vcpu, (u32)irq, handler);
 
+	++svm->vcpu.stat.irq_injections;
 	control = &svm->vmcb->control;
 	control->int_vector = irq;
 	control->int_ctl &= ~V_INTR_PRIO_MASK;
@@ -1716,6 +1707,12 @@ static inline void sync_lapic_to_cr8(struct kvm_vcpu *vcpu)
 	svm->vmcb->control.int_ctl |= cr8 & V_TPR_MASK;
 }
 
+#ifdef CONFIG_X86_64
+#define R "r"
+#else
+#define R "e"
+#endif
+
 static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -1723,6 +1720,10 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	u16 gs_selector;
 	u16 ldt_selector;
 
+	svm->vmcb->save.rax = vcpu->arch.regs[VCPU_REGS_RAX];
+	svm->vmcb->save.rsp = vcpu->arch.regs[VCPU_REGS_RSP];
+	svm->vmcb->save.rip = vcpu->arch.regs[VCPU_REGS_RIP];
+
 	pre_svm_run(svm);
 
 	sync_lapic_to_cr8(vcpu);
@@ -1750,19 +1751,14 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	local_irq_enable();
 
 	asm volatile (
+		"push %%"R"bp; \n\t"
+		"mov %c[rbx](%[svm]), %%"R"bx \n\t"
+		"mov %c[rcx](%[svm]), %%"R"cx \n\t"
+		"mov %c[rdx](%[svm]), %%"R"dx \n\t"
+		"mov %c[rsi](%[svm]), %%"R"si \n\t"
+		"mov %c[rdi](%[svm]), %%"R"di \n\t"
+		"mov %c[rbp](%[svm]), %%"R"bp \n\t"
 #ifdef CONFIG_X86_64
-		"push %%rbp; \n\t"
-#else
-		"push %%ebp; \n\t"
-#endif
-
-#ifdef CONFIG_X86_64
-		"mov %c[rbx](%[svm]), %%rbx \n\t"
-		"mov %c[rcx](%[svm]), %%rcx \n\t"
-		"mov %c[rdx](%[svm]), %%rdx \n\t"
-		"mov %c[rsi](%[svm]), %%rsi \n\t"
-		"mov %c[rdi](%[svm]), %%rdi \n\t"
-		"mov %c[rbp](%[svm]), %%rbp \n\t"
 		"mov %c[r8](%[svm]),  %%r8  \n\t"
 		"mov %c[r9](%[svm]),  %%r9  \n\t"
 		"mov %c[r10](%[svm]), %%r10 \n\t"
@@ -1771,41 +1767,24 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		"mov %c[r13](%[svm]), %%r13 \n\t"
 		"mov %c[r14](%[svm]), %%r14 \n\t"
 		"mov %c[r15](%[svm]), %%r15 \n\t"
-#else
-		"mov %c[rbx](%[svm]), %%ebx \n\t"
-		"mov %c[rcx](%[svm]), %%ecx \n\t"
-		"mov %c[rdx](%[svm]), %%edx \n\t"
-		"mov %c[rsi](%[svm]), %%esi \n\t"
-		"mov %c[rdi](%[svm]), %%edi \n\t"
-		"mov %c[rbp](%[svm]), %%ebp \n\t"
 #endif
 
-#ifdef CONFIG_X86_64
-		/* Enter guest mode */
-		"push %%rax \n\t"
-		"mov %c[vmcb](%[svm]), %%rax \n\t"
-		__ex(SVM_VMLOAD) "\n\t"
-		__ex(SVM_VMRUN) "\n\t"
-		__ex(SVM_VMSAVE) "\n\t"
-		"pop %%rax \n\t"
-#else
 		/* Enter guest mode */
-		"push %%eax \n\t"
-		"mov %c[vmcb](%[svm]), %%eax \n\t"
+		"push %%"R"ax \n\t"
+		"mov %c[vmcb](%[svm]), %%"R"ax \n\t"
 		__ex(SVM_VMLOAD) "\n\t"
 		__ex(SVM_VMRUN) "\n\t"
 		__ex(SVM_VMSAVE) "\n\t"
-		"pop %%eax \n\t"
-#endif
+		"pop %%"R"ax \n\t"
 
 		/* Save guest registers, load host registers */
+		"mov %%"R"bx, %c[rbx](%[svm]) \n\t"
+		"mov %%"R"cx, %c[rcx](%[svm]) \n\t"
+		"mov %%"R"dx, %c[rdx](%[svm]) \n\t"
+		"mov %%"R"si, %c[rsi](%[svm]) \n\t"
+		"mov %%"R"di, %c[rdi](%[svm]) \n\t"
+		"mov %%"R"bp, %c[rbp](%[svm]) \n\t"
 #ifdef CONFIG_X86_64
-		"mov %%rbx, %c[rbx](%[svm]) \n\t"
-		"mov %%rcx, %c[rcx](%[svm]) \n\t"
-		"mov %%rdx, %c[rdx](%[svm]) \n\t"
-		"mov %%rsi, %c[rsi](%[svm]) \n\t"
-		"mov %%rdi, %c[rdi](%[svm]) \n\t"
-		"mov %%rbp, %c[rbp](%[svm]) \n\t"
 		"mov %%r8,  %c[r8](%[svm]) \n\t"
 		"mov %%r9,  %c[r9](%[svm]) \n\t"
 		"mov %%r10, %c[r10](%[svm]) \n\t"
@@ -1814,18 +1793,8 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		"mov %%r13, %c[r13](%[svm]) \n\t"
 		"mov %%r14, %c[r14](%[svm]) \n\t"
 		"mov %%r15, %c[r15](%[svm]) \n\t"
-
-		"pop  %%rbp; \n\t"
-#else
-		"mov %%ebx, %c[rbx](%[svm]) \n\t"
-		"mov %%ecx, %c[rcx](%[svm]) \n\t"
-		"mov %%edx, %c[rdx](%[svm]) \n\t"
-		"mov %%esi, %c[rsi](%[svm]) \n\t"
-		"mov %%edi, %c[rdi](%[svm]) \n\t"
-		"mov %%ebp, %c[rbp](%[svm]) \n\t"
-
-		"pop  %%ebp; \n\t"
 #endif
+		"pop %%"R"bp"
 		:
 		: [svm]"a"(svm),
 		  [vmcb]"i"(offsetof(struct vcpu_svm, vmcb_pa)),
@@ -1846,11 +1815,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		  [r15]"i"(offsetof(struct vcpu_svm, vcpu.arch.regs[VCPU_REGS_R15]))
 #endif
 		: "cc", "memory"
+		, R"bx", R"cx", R"dx", R"si", R"di"
 #ifdef CONFIG_X86_64
-		, "rbx", "rcx", "rdx", "rsi", "rdi"
 		, "r8", "r9", "r10", "r11" , "r12", "r13", "r14", "r15"
-#else
-		, "ebx", "ecx", "edx" , "esi", "edi"
 #endif
 		);
 
@@ -1858,6 +1825,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		load_db_regs(svm->host_db_regs);
 
 	vcpu->arch.cr2 = svm->vmcb->save.cr2;
+	vcpu->arch.regs[VCPU_REGS_RAX] = svm->vmcb->save.rax;
+	vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp;
+	vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
 
 	write_dr6(svm->host_dr6);
 	write_dr7(svm->host_dr7);
@@ -1879,6 +1849,8 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	svm->next_rip = 0;
 }
 
+#undef R
+
 static void svm_set_cr3(struct kvm_vcpu *vcpu, unsigned long root)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -1977,8 +1949,6 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.set_gdt = svm_set_gdt,
 	.get_dr = svm_get_dr,
 	.set_dr = svm_set_dr,
-	.cache_regs = svm_cache_regs,
-	.decache_regs = svm_decache_regs,
 	.get_rflags = svm_get_rflags,
 	.set_rflags = svm_set_rflags,
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 7041cc5..2643b43 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -26,6 +26,8 @@
 #include <linux/highmem.h>
 #include <linux/sched.h>
 #include <linux/moduleparam.h>
+#include "kvm_cache_regs.h"
+#include "x86.h"
 
 #include <asm/io.h>
 #include <asm/desc.h>
@@ -47,6 +49,9 @@ module_param(flexpriority_enabled, bool, 0);
 static int enable_ept = 1;
 module_param(enable_ept, bool, 0);
 
+static int emulate_invalid_guest_state = 0;
+module_param(emulate_invalid_guest_state, bool, 0);
+
 struct vmcs {
 	u32 revision_id;
 	u32 abort;
@@ -56,6 +61,7 @@ struct vmcs {
 struct vcpu_vmx {
 	struct kvm_vcpu       vcpu;
 	struct list_head      local_vcpus_link;
+	unsigned long         host_rsp;
 	int                   launched;
 	u8                    fail;
 	u32                   idt_vectoring_info;
@@ -83,6 +89,7 @@ struct vcpu_vmx {
 		} irq;
 	} rmode;
 	int vpid;
+	bool emulation_required;
 };
 
 static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu)
@@ -468,7 +475,7 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 	if (!vcpu->fpu_active)
 		eb |= 1u << NM_VECTOR;
 	if (vcpu->guest_debug.enabled)
-		eb |= 1u << 1;
+		eb |= 1u << DB_VECTOR;
 	if (vcpu->arch.rmode.active)
 		eb = ~0;
 	if (vm_need_ept())
@@ -715,9 +722,9 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 	unsigned long rip;
 	u32 interruptibility;
 
-	rip = vmcs_readl(GUEST_RIP);
+	rip = kvm_rip_read(vcpu);
 	rip += vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
-	vmcs_writel(GUEST_RIP, rip);
+	kvm_rip_write(vcpu, rip);
 
 	/*
 	 * We emulated an instruction, so temporary interrupt blocking
@@ -733,19 +740,35 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 				bool has_error_code, u32 error_code)
 {
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	if (has_error_code)
+		vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, error_code);
+
+	if (vcpu->arch.rmode.active) {
+		vmx->rmode.irq.pending = true;
+		vmx->rmode.irq.vector = nr;
+		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
+		if (nr == BP_VECTOR)
+			vmx->rmode.irq.rip++;
+		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+			     nr | INTR_TYPE_SOFT_INTR
+			     | (has_error_code ? INTR_INFO_DELIVER_CODE_MASK : 0)
+			     | INTR_INFO_VALID_MASK);
+		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
+		kvm_rip_write(vcpu, vmx->rmode.irq.rip - 1);
+		return;
+	}
+
 	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
 		     nr | INTR_TYPE_EXCEPTION
 		     | (has_error_code ? INTR_INFO_DELIVER_CODE_MASK : 0)
 		     | INTR_INFO_VALID_MASK);
-	if (has_error_code)
-		vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, error_code);
 }
 
 static bool vmx_exception_injected(struct kvm_vcpu *vcpu)
 {
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-
-	return !(vmx->idt_vectoring_info & VECTORING_INFO_VALID_MASK);
+	return false;
 }
 
 /*
@@ -947,24 +970,19 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	return ret;
 }
 
-/*
- * Sync the rsp and rip registers into the vcpu structure.  This allows
- * registers to be accessed by indexing vcpu->arch.regs.
- */
-static void vcpu_load_rsp_rip(struct kvm_vcpu *vcpu)
-{
-	vcpu->arch.regs[VCPU_REGS_RSP] = vmcs_readl(GUEST_RSP);
-	vcpu->arch.rip = vmcs_readl(GUEST_RIP);
-}
-
-/*
- * Syncs rsp and rip back into the vmcs.  Should be called after possible
- * modification.
- */
-static void vcpu_put_rsp_rip(struct kvm_vcpu *vcpu)
+static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
 {
-	vmcs_writel(GUEST_RSP, vcpu->arch.regs[VCPU_REGS_RSP]);
-	vmcs_writel(GUEST_RIP, vcpu->arch.rip);
+	__set_bit(reg, (unsigned long *)&vcpu->arch.regs_avail);
+	switch (reg) {
+	case VCPU_REGS_RSP:
+		vcpu->arch.regs[VCPU_REGS_RSP] = vmcs_readl(GUEST_RSP);
+		break;
+	case VCPU_REGS_RIP:
+		vcpu->arch.regs[VCPU_REGS_RIP] = vmcs_readl(GUEST_RIP);
+		break;
+	default:
+		break;
+	}
 }
 
 static int set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_debug_guest *dbg)
@@ -1007,17 +1025,9 @@ static int set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_debug_guest *dbg)
 
 static int vmx_get_irq(struct kvm_vcpu *vcpu)
 {
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	u32 idtv_info_field;
-
-	idtv_info_field = vmx->idt_vectoring_info;
-	if (idtv_info_field & INTR_INFO_VALID_MASK) {
-		if (is_external_interrupt(idtv_info_field))
-			return idtv_info_field & VECTORING_INFO_VECTOR_MASK;
-		else
-			printk(KERN_DEBUG "pending exception: not handled yet\n");
-	}
-	return -1;
+	if (!vcpu->arch.interrupt.pending)
+		return -1;
+	return vcpu->arch.interrupt.nr;
 }
 
 static __init int cpu_has_kvm_support(void)
@@ -1031,9 +1041,9 @@ static __init int vmx_disabled_by_bios(void)
 	u64 msr;
 
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, msr);
-	return (msr & (MSR_IA32_FEATURE_CONTROL_LOCKED |
-		       MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED))
-	    == MSR_IA32_FEATURE_CONTROL_LOCKED;
+	return (msr & (FEATURE_CONTROL_LOCKED |
+		       FEATURE_CONTROL_VMXON_ENABLED))
+	    == FEATURE_CONTROL_LOCKED;
 	/* locked but not enabled */
 }
 
@@ -1045,14 +1055,14 @@ static void hardware_enable(void *garbage)
 
 	INIT_LIST_HEAD(&per_cpu(vcpus_on_cpu, cpu));
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
-	if ((old & (MSR_IA32_FEATURE_CONTROL_LOCKED |
-		    MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED))
-	    != (MSR_IA32_FEATURE_CONTROL_LOCKED |
-		MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED))
+	if ((old & (FEATURE_CONTROL_LOCKED |
+		    FEATURE_CONTROL_VMXON_ENABLED))
+	    != (FEATURE_CONTROL_LOCKED |
+		FEATURE_CONTROL_VMXON_ENABLED))
 		/* enable and lock */
 		wrmsrl(MSR_IA32_FEATURE_CONTROL, old |
-		       MSR_IA32_FEATURE_CONTROL_LOCKED |
-		       MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED);
+		       FEATURE_CONTROL_LOCKED |
+		       FEATURE_CONTROL_VMXON_ENABLED);
 	write_cr4(read_cr4() | X86_CR4_VMXE); /* FIXME: not cpu hotplug safe */
 	asm volatile (ASM_VMX_VMXON_RAX
 		      : : "a"(&phys_addr), "m"(phys_addr)
@@ -1120,7 +1130,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 	      CPU_BASED_CR3_STORE_EXITING |
 	      CPU_BASED_USE_IO_BITMAPS |
 	      CPU_BASED_MOV_DR_EXITING |
-	      CPU_BASED_USE_TSC_OFFSETING;
+	      CPU_BASED_USE_TSC_OFFSETING |
+	      CPU_BASED_INVLPG_EXITING;
 	opt = CPU_BASED_TPR_SHADOW |
 	      CPU_BASED_USE_MSR_BITMAPS |
 	      CPU_BASED_ACTIVATE_SECONDARY_CONTROLS;
@@ -1149,9 +1160,11 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 		_cpu_based_exec_control &= ~CPU_BASED_TPR_SHADOW;
 #endif
 	if (_cpu_based_2nd_exec_control & SECONDARY_EXEC_ENABLE_EPT) {
-		/* CR3 accesses don't need to cause VM Exits when EPT enabled */
+		/* CR3 accesses and invlpg don't need to cause VM Exits when EPT
+		   enabled */
 		min &= ~(CPU_BASED_CR3_LOAD_EXITING |
-			 CPU_BASED_CR3_STORE_EXITING);
+			 CPU_BASED_CR3_STORE_EXITING |
+			 CPU_BASED_INVLPG_EXITING);
 		if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS,
 					&_cpu_based_exec_control) < 0)
 			return -EIO;
@@ -1288,7 +1301,9 @@ static void fix_pmode_dataseg(int seg, struct kvm_save_segment *save)
 static void enter_pmode(struct kvm_vcpu *vcpu)
 {
 	unsigned long flags;
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	vmx->emulation_required = 1;
 	vcpu->arch.rmode.active = 0;
 
 	vmcs_writel(GUEST_TR_BASE, vcpu->arch.rmode.tr.base);
@@ -1305,6 +1320,9 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 
 	update_exception_bitmap(vcpu);
 
+	if (emulate_invalid_guest_state)
+		return;
+
 	fix_pmode_dataseg(VCPU_SREG_ES, &vcpu->arch.rmode.es);
 	fix_pmode_dataseg(VCPU_SREG_DS, &vcpu->arch.rmode.ds);
 	fix_pmode_dataseg(VCPU_SREG_GS, &vcpu->arch.rmode.gs);
@@ -1345,7 +1363,9 @@ static void fix_rmode_seg(int seg, struct kvm_save_segment *save)
 static void enter_rmode(struct kvm_vcpu *vcpu)
 {
 	unsigned long flags;
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	vmx->emulation_required = 1;
 	vcpu->arch.rmode.active = 1;
 
 	vcpu->arch.rmode.tr.base = vmcs_readl(GUEST_TR_BASE);
@@ -1367,6 +1387,9 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 	vmcs_writel(GUEST_CR4, vmcs_readl(GUEST_CR4) | X86_CR4_VME);
 	update_exception_bitmap(vcpu);
 
+	if (emulate_invalid_guest_state)
+		goto continue_rmode;
+
 	vmcs_write16(GUEST_SS_SELECTOR, vmcs_readl(GUEST_SS_BASE) >> 4);
 	vmcs_write32(GUEST_SS_LIMIT, 0xffff);
 	vmcs_write32(GUEST_SS_AR_BYTES, 0xf3);
@@ -1382,6 +1405,7 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 	fix_rmode_seg(VCPU_SREG_GS, &vcpu->arch.rmode.gs);
 	fix_rmode_seg(VCPU_SREG_FS, &vcpu->arch.rmode.fs);
 
+continue_rmode:
 	kvm_mmu_reset_context(vcpu);
 	init_rmode(vcpu->kvm);
 }
@@ -1715,6 +1739,186 @@ static void vmx_set_gdt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
 	vmcs_writel(GUEST_GDTR_BASE, dt->base);
 }
 
+static bool rmode_segment_valid(struct kvm_vcpu *vcpu, int seg)
+{
+	struct kvm_segment var;
+	u32 ar;
+
+	vmx_get_segment(vcpu, &var, seg);
+	ar = vmx_segment_access_rights(&var);
+
+	if (var.base != (var.selector << 4))
+		return false;
+	if (var.limit != 0xffff)
+		return false;
+	if (ar != 0xf3)
+		return false;
+
+	return true;
+}
+
+static bool code_segment_valid(struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment cs;
+	unsigned int cs_rpl;
+
+	vmx_get_segment(vcpu, &cs, VCPU_SREG_CS);
+	cs_rpl = cs.selector & SELECTOR_RPL_MASK;
+
+	if (~cs.type & (AR_TYPE_CODE_MASK|AR_TYPE_ACCESSES_MASK))
+		return false;
+	if (!cs.s)
+		return false;
+	if (!(~cs.type & (AR_TYPE_CODE_MASK|AR_TYPE_WRITEABLE_MASK))) {
+		if (cs.dpl > cs_rpl)
+			return false;
+	} else if (cs.type & AR_TYPE_CODE_MASK) {
+		if (cs.dpl != cs_rpl)
+			return false;
+	}
+	if (!cs.present)
+		return false;
+
+	/* TODO: Add Reserved field check, this'll require a new member in the kvm_segment_field structure */
+	return true;
+}
+
+static bool stack_segment_valid(struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment ss;
+	unsigned int ss_rpl;
+
+	vmx_get_segment(vcpu, &ss, VCPU_SREG_SS);
+	ss_rpl = ss.selector & SELECTOR_RPL_MASK;
+
+	if ((ss.type != 3) || (ss.type != 7))
+		return false;
+	if (!ss.s)
+		return false;
+	if (ss.dpl != ss_rpl) /* DPL != RPL */
+		return false;
+	if (!ss.present)
+		return false;
+
+	return true;
+}
+
+static bool data_segment_valid(struct kvm_vcpu *vcpu, int seg)
+{
+	struct kvm_segment var;
+	unsigned int rpl;
+
+	vmx_get_segment(vcpu, &var, seg);
+	rpl = var.selector & SELECTOR_RPL_MASK;
+
+	if (!var.s)
+		return false;
+	if (!var.present)
+		return false;
+	if (~var.type & (AR_TYPE_CODE_MASK|AR_TYPE_WRITEABLE_MASK)) {
+		if (var.dpl < rpl) /* DPL < RPL */
+			return false;
+	}
+
+	/* TODO: Add other members to kvm_segment_field to allow checking for other access
+	 * rights flags
+	 */
+	return true;
+}
+
+static bool tr_valid(struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment tr;
+
+	vmx_get_segment(vcpu, &tr, VCPU_SREG_TR);
+
+	if (tr.selector & SELECTOR_TI_MASK)	/* TI = 1 */
+		return false;
+	if ((tr.type != 3) || (tr.type != 11)) /* TODO: Check if guest is in IA32e mode */
+		return false;
+	if (!tr.present)
+		return false;
+
+	return true;
+}
+
+static bool ldtr_valid(struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment ldtr;
+
+	vmx_get_segment(vcpu, &ldtr, VCPU_SREG_LDTR);
+
+	if (ldtr.selector & SELECTOR_TI_MASK)	/* TI = 1 */
+		return false;
+	if (ldtr.type != 2)
+		return false;
+	if (!ldtr.present)
+		return false;
+
+	return true;
+}
+
+static bool cs_ss_rpl_check(struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment cs, ss;
+
+	vmx_get_segment(vcpu, &cs, VCPU_SREG_CS);
+	vmx_get_segment(vcpu, &ss, VCPU_SREG_SS);
+
+	return ((cs.selector & SELECTOR_RPL_MASK) ==
+		 (ss.selector & SELECTOR_RPL_MASK));
+}
+
+/*
+ * Check if guest state is valid. Returns true if valid, false if
+ * not.
+ * We assume that registers are always usable
+ */
+static bool guest_state_valid(struct kvm_vcpu *vcpu)
+{
+	/* real mode guest state checks */
+	if (!(vcpu->arch.cr0 & X86_CR0_PE)) {
+		if (!rmode_segment_valid(vcpu, VCPU_SREG_CS))
+			return false;
+		if (!rmode_segment_valid(vcpu, VCPU_SREG_SS))
+			return false;
+		if (!rmode_segment_valid(vcpu, VCPU_SREG_DS))
+			return false;
+		if (!rmode_segment_valid(vcpu, VCPU_SREG_ES))
+			return false;
+		if (!rmode_segment_valid(vcpu, VCPU_SREG_FS))
+			return false;
+		if (!rmode_segment_valid(vcpu, VCPU_SREG_GS))
+			return false;
+	} else {
+	/* protected mode guest state checks */
+		if (!cs_ss_rpl_check(vcpu))
+			return false;
+		if (!code_segment_valid(vcpu))
+			return false;
+		if (!stack_segment_valid(vcpu))
+			return false;
+		if (!data_segment_valid(vcpu, VCPU_SREG_DS))
+			return false;
+		if (!data_segment_valid(vcpu, VCPU_SREG_ES))
+			return false;
+		if (!data_segment_valid(vcpu, VCPU_SREG_FS))
+			return false;
+		if (!data_segment_valid(vcpu, VCPU_SREG_GS))
+			return false;
+		if (!tr_valid(vcpu))
+			return false;
+		if (!ldtr_valid(vcpu))
+			return false;
+	}
+	/* TODO:
+	 * - Add checks on RIP
+	 * - Add checks on RFLAGS
+	 */
+
+	return true;
+}
+
 static int init_rmode_tss(struct kvm *kvm)
 {
 	gfn_t fn = rmode_tss_base(kvm) >> PAGE_SHIFT;
@@ -1726,7 +1930,8 @@ static int init_rmode_tss(struct kvm *kvm)
 	if (r < 0)
 		goto out;
 	data = TSS_BASE_SIZE + TSS_REDIRECTION_SIZE;
-	r = kvm_write_guest_page(kvm, fn++, &data, 0x66, sizeof(u16));
+	r = kvm_write_guest_page(kvm, fn++, &data,
+			TSS_IOPB_BASE_OFFSET, sizeof(u16));
 	if (r < 0)
 		goto out;
 	r = kvm_clear_guest_page(kvm, fn++, 0, PAGE_SIZE);
@@ -1789,7 +1994,7 @@ static void seg_setup(int seg)
 	vmcs_write16(sf->selector, 0);
 	vmcs_writel(sf->base, 0);
 	vmcs_write32(sf->limit, 0xffff);
-	vmcs_write32(sf->ar_bytes, 0x93);
+	vmcs_write32(sf->ar_bytes, 0xf3);
 }
 
 static int alloc_apic_access_page(struct kvm *kvm)
@@ -1808,9 +2013,7 @@ static int alloc_apic_access_page(struct kvm *kvm)
 	if (r)
 		goto out;
 
-	down_read(&current->mm->mmap_sem);
 	kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00);
-	up_read(&current->mm->mmap_sem);
 out:
 	up_write(&kvm->slots_lock);
 	return r;
@@ -1832,10 +2035,8 @@ static int alloc_identity_pagetable(struct kvm *kvm)
 	if (r)
 		goto out;
 
-	down_read(&current->mm->mmap_sem);
 	kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
 			VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT);
-	up_read(&current->mm->mmap_sem);
 out:
 	up_write(&kvm->slots_lock);
 	return r;
@@ -1917,7 +2118,8 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	}
 	if (!vm_need_ept())
 		exec_control |= CPU_BASED_CR3_STORE_EXITING |
-				CPU_BASED_CR3_LOAD_EXITING;
+				CPU_BASED_CR3_LOAD_EXITING  |
+				CPU_BASED_INVLPG_EXITING;
 	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, exec_control);
 
 	if (cpu_has_secondary_exec_ctrls()) {
@@ -2019,6 +2221,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	u64 msr;
 	int ret;
 
+	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP));
 	down_read(&vcpu->kvm->slots_lock);
 	if (!init_rmode(vmx->vcpu.kvm)) {
 		ret = -ENOMEM;
@@ -2036,6 +2239,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 
 	fx_init(&vmx->vcpu);
 
+	seg_setup(VCPU_SREG_CS);
 	/*
 	 * GUEST_CS_BASE should really be 0xffff0000, but VT vm86 mode
 	 * insists on having GUEST_CS_BASE == GUEST_CS_SELECTOR << 4.  Sigh.
@@ -2047,8 +2251,6 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 		vmcs_write16(GUEST_CS_SELECTOR, vmx->vcpu.arch.sipi_vector << 8);
 		vmcs_writel(GUEST_CS_BASE, vmx->vcpu.arch.sipi_vector << 12);
 	}
-	vmcs_write32(GUEST_CS_LIMIT, 0xffff);
-	vmcs_write32(GUEST_CS_AR_BYTES, 0x9b);
 
 	seg_setup(VCPU_SREG_DS);
 	seg_setup(VCPU_SREG_ES);
@@ -2072,10 +2274,10 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 
 	vmcs_writel(GUEST_RFLAGS, 0x02);
 	if (vmx->vcpu.vcpu_id == 0)
-		vmcs_writel(GUEST_RIP, 0xfff0);
+		kvm_rip_write(vcpu, 0xfff0);
 	else
-		vmcs_writel(GUEST_RIP, 0);
-	vmcs_writel(GUEST_RSP, 0);
+		kvm_rip_write(vcpu, 0);
+	kvm_register_write(vcpu, VCPU_REGS_RSP, 0);
 
 	/* todo: dr0 = dr1 = dr2 = dr3 = 0; dr6 = 0xffff0ff0 */
 	vmcs_writel(GUEST_DR7, 0x400);
@@ -2125,6 +2327,9 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 
 	ret = 0;
 
+	/* HACK: Don't enable emulation on guest boot/reset */
+	vmx->emulation_required = 0;
+
 out:
 	up_read(&vcpu->kvm->slots_lock);
 	return ret;
@@ -2136,14 +2341,15 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu, int irq)
 
 	KVMTRACE_1D(INJ_VIRQ, vcpu, (u32)irq, handler);
 
+	++vcpu->stat.irq_injections;
 	if (vcpu->arch.rmode.active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = irq;
-		vmx->rmode.irq.rip = vmcs_readl(GUEST_RIP);
+		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
 		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
 			     irq | INTR_TYPE_SOFT_INTR | INTR_INFO_VALID_MASK);
 		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
-		vmcs_writel(GUEST_RIP, vmx->rmode.irq.rip - 1);
+		kvm_rip_write(vcpu, vmx->rmode.irq.rip - 1);
 		return;
 	}
 	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
@@ -2154,7 +2360,6 @@ static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
 {
 	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
 			INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK | NMI_VECTOR);
-	vcpu->arch.nmi_pending = 0;
 }
 
 static void kvm_do_inject_irq(struct kvm_vcpu *vcpu)
@@ -2166,7 +2371,7 @@ static void kvm_do_inject_irq(struct kvm_vcpu *vcpu)
 	clear_bit(bit_index, &vcpu->arch.irq_pending[word_index]);
 	if (!vcpu->arch.irq_pending[word_index])
 		clear_bit(word_index, &vcpu->arch.irq_summary);
-	vmx_inject_irq(vcpu, irq);
+	kvm_queue_interrupt(vcpu, irq);
 }
 
 
@@ -2180,13 +2385,12 @@ static void do_interrupt_requests(struct kvm_vcpu *vcpu,
 		 (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0);
 
 	if (vcpu->arch.interrupt_window_open &&
-	    vcpu->arch.irq_summary &&
-	    !(vmcs_read32(VM_ENTRY_INTR_INFO_FIELD) & INTR_INFO_VALID_MASK))
-		/*
-		 * If interrupts enabled, and not blocked by sti or mov ss. Good.
-		 */
+	    vcpu->arch.irq_summary && !vcpu->arch.interrupt.pending)
 		kvm_do_inject_irq(vcpu);
 
+	if (vcpu->arch.interrupt_window_open && vcpu->arch.interrupt.pending)
+		vmx_inject_irq(vcpu, vcpu->arch.interrupt.nr);
+
 	cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
 	if (!vcpu->arch.interrupt_window_open &&
 	    (vcpu->arch.irq_summary || kvm_run->request_interrupt_window))
@@ -2237,9 +2441,6 @@ static void kvm_guest_debug_pre(struct kvm_vcpu *vcpu)
 static int handle_rmode_exception(struct kvm_vcpu *vcpu,
 				  int vec, u32 err_code)
 {
-	if (!vcpu->arch.rmode.active)
-		return 0;
-
 	/*
 	 * Instruction with address size override prefix opcode 0x67
 	 * Cause the #SS fault with 0 error code in VM86 mode.
@@ -2247,6 +2448,25 @@ static int handle_rmode_exception(struct kvm_vcpu *vcpu,
 	if (((vec == GP_VECTOR) || (vec == SS_VECTOR)) && err_code == 0)
 		if (emulate_instruction(vcpu, NULL, 0, 0, 0) == EMULATE_DONE)
 			return 1;
+	/*
+	 * Forward all other exceptions that are valid in real mode.
+	 * FIXME: Breaks guest debugging in real mode, needs to be fixed with
+	 *        the required debugging infrastructure rework.
+	 */
+	switch (vec) {
+	case DE_VECTOR:
+	case DB_VECTOR:
+	case BP_VECTOR:
+	case OF_VECTOR:
+	case BR_VECTOR:
+	case UD_VECTOR:
+	case DF_VECTOR:
+	case SS_VECTOR:
+	case GP_VECTOR:
+	case MF_VECTOR:
+		kvm_queue_exception(vcpu, vec);
+		return 1;
+	}
 	return 0;
 }
 
@@ -2288,7 +2508,7 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 
 	error_code = 0;
-	rip = vmcs_readl(GUEST_RIP);
+	rip = kvm_rip_read(vcpu);
 	if (intr_info & INTR_INFO_DELIVER_CODE_MASK)
 		error_code = vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
 	if (is_page_fault(intr_info)) {
@@ -2298,7 +2518,7 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		cr2 = vmcs_readl(EXIT_QUALIFICATION);
 		KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
 			    (u32)((u64)cr2 >> 32), handler);
-		if (vect_info & VECTORING_INFO_VALID_MASK)
+		if (vcpu->arch.interrupt.pending || vcpu->arch.exception.pending)
 			kvm_mmu_unprotect_page_virt(vcpu, cr2);
 		return kvm_mmu_page_fault(vcpu, cr2, error_code);
 	}
@@ -2386,27 +2606,25 @@ static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	reg = (exit_qualification >> 8) & 15;
 	switch ((exit_qualification >> 4) & 3) {
 	case 0: /* mov to cr */
-		KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr, (u32)vcpu->arch.regs[reg],
-			    (u32)((u64)vcpu->arch.regs[reg] >> 32), handler);
+		KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr,
+			    (u32)kvm_register_read(vcpu, reg),
+			    (u32)((u64)kvm_register_read(vcpu, reg) >> 32),
+			    handler);
 		switch (cr) {
 		case 0:
-			vcpu_load_rsp_rip(vcpu);
-			kvm_set_cr0(vcpu, vcpu->arch.regs[reg]);
+			kvm_set_cr0(vcpu, kvm_register_read(vcpu, reg));
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 3:
-			vcpu_load_rsp_rip(vcpu);
-			kvm_set_cr3(vcpu, vcpu->arch.regs[reg]);
+			kvm_set_cr3(vcpu, kvm_register_read(vcpu, reg));
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 4:
-			vcpu_load_rsp_rip(vcpu);
-			kvm_set_cr4(vcpu, vcpu->arch.regs[reg]);
+			kvm_set_cr4(vcpu, kvm_register_read(vcpu, reg));
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 8:
-			vcpu_load_rsp_rip(vcpu);
-			kvm_set_cr8(vcpu, vcpu->arch.regs[reg]);
+			kvm_set_cr8(vcpu, kvm_register_read(vcpu, reg));
 			skip_emulated_instruction(vcpu);
 			if (irqchip_in_kernel(vcpu->kvm))
 				return 1;
@@ -2415,7 +2633,6 @@ static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		};
 		break;
 	case 2: /* clts */
-		vcpu_load_rsp_rip(vcpu);
 		vmx_fpu_deactivate(vcpu);
 		vcpu->arch.cr0 &= ~X86_CR0_TS;
 		vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0);
@@ -2426,21 +2643,17 @@ static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	case 1: /*mov from cr*/
 		switch (cr) {
 		case 3:
-			vcpu_load_rsp_rip(vcpu);
-			vcpu->arch.regs[reg] = vcpu->arch.cr3;
-			vcpu_put_rsp_rip(vcpu);
+			kvm_register_write(vcpu, reg, vcpu->arch.cr3);
 			KVMTRACE_3D(CR_READ, vcpu, (u32)cr,
-				    (u32)vcpu->arch.regs[reg],
-				    (u32)((u64)vcpu->arch.regs[reg] >> 32),
+				    (u32)kvm_register_read(vcpu, reg),
+				    (u32)((u64)kvm_register_read(vcpu, reg) >> 32),
 				    handler);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 8:
-			vcpu_load_rsp_rip(vcpu);
-			vcpu->arch.regs[reg] = kvm_get_cr8(vcpu);
-			vcpu_put_rsp_rip(vcpu);
+			kvm_register_write(vcpu, reg, kvm_get_cr8(vcpu));
 			KVMTRACE_2D(CR_READ, vcpu, (u32)cr,
-				    (u32)vcpu->arch.regs[reg], handler);
+				    (u32)kvm_register_read(vcpu, reg), handler);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		}
@@ -2472,7 +2685,6 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 	dr = exit_qualification & 7;
 	reg = (exit_qualification >> 8) & 15;
-	vcpu_load_rsp_rip(vcpu);
 	if (exit_qualification & 16) {
 		/* mov from dr */
 		switch (dr) {
@@ -2485,12 +2697,11 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		default:
 			val = 0;
 		}
-		vcpu->arch.regs[reg] = val;
+		kvm_register_write(vcpu, reg, val);
 		KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
 	} else {
 		/* mov to dr */
 	}
-	vcpu_put_rsp_rip(vcpu);
 	skip_emulated_instruction(vcpu);
 	return 1;
 }
@@ -2583,6 +2794,15 @@ static int handle_vmcall(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	u64 exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
+
+	kvm_mmu_invlpg(vcpu, exit_qualification);
+	skip_emulated_instruction(vcpu);
+	return 1;
+}
+
 static int handle_wbinvd(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	skip_emulated_instruction(vcpu);
@@ -2695,6 +2915,43 @@ static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
+				struct kvm_run *kvm_run)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	int err;
+
+	preempt_enable();
+	local_irq_enable();
+
+	while (!guest_state_valid(vcpu)) {
+		err = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
+
+		switch (err) {
+			case EMULATE_DONE:
+				break;
+			case EMULATE_DO_MMIO:
+				kvm_report_emulation_failure(vcpu, "mmio");
+				/* TODO: Handle MMIO */
+				return;
+			default:
+				kvm_report_emulation_failure(vcpu, "emulation failure");
+				return;
+		}
+
+		if (signal_pending(current))
+			break;
+		if (need_resched())
+			schedule();
+	}
+
+	local_irq_disable();
+	preempt_disable();
+
+	/* Guest state should be valid now, no more emulation should be needed */
+	vmx->emulation_required = 0;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -2714,6 +2971,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
 	[EXIT_REASON_MSR_WRITE]               = handle_wrmsr,
 	[EXIT_REASON_PENDING_INTERRUPT]       = handle_interrupt_window,
 	[EXIT_REASON_HLT]                     = handle_halt,
+	[EXIT_REASON_INVLPG]		      = handle_invlpg,
 	[EXIT_REASON_VMCALL]                  = handle_vmcall,
 	[EXIT_REASON_TPR_BELOW_THRESHOLD]     = handle_tpr_below_threshold,
 	[EXIT_REASON_APIC_ACCESS]             = handle_apic_access,
@@ -2735,8 +2993,8 @@ static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 vectoring_info = vmx->idt_vectoring_info;
 
-	KVMTRACE_3D(VMEXIT, vcpu, exit_reason, (u32)vmcs_readl(GUEST_RIP),
-		    (u32)((u64)vmcs_readl(GUEST_RIP) >> 32), entryexit);
+	KVMTRACE_3D(VMEXIT, vcpu, exit_reason, (u32)kvm_rip_read(vcpu),
+		    (u32)((u64)kvm_rip_read(vcpu) >> 32), entryexit);
 
 	/* Access CR3 don't cause VMExit in paging mode, so we need
 	 * to sync with guest real CR3. */
@@ -2829,88 +3087,92 @@ static void enable_intr_window(struct kvm_vcpu *vcpu)
 		enable_irq_window(vcpu);
 }
 
-static void vmx_intr_assist(struct kvm_vcpu *vcpu)
+static void vmx_complete_interrupts(struct vcpu_vmx *vmx)
 {
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	u32 idtv_info_field, intr_info_field, exit_intr_info_field;
-	int vector;
+	u32 exit_intr_info;
+	u32 idt_vectoring_info;
+	bool unblock_nmi;
+	u8 vector;
+	int type;
+	bool idtv_info_valid;
+	u32 error;
 
-	update_tpr_threshold(vcpu);
-
-	intr_info_field = vmcs_read32(VM_ENTRY_INTR_INFO_FIELD);
-	exit_intr_info_field = vmcs_read32(VM_EXIT_INTR_INFO);
-	idtv_info_field = vmx->idt_vectoring_info;
-	if (intr_info_field & INTR_INFO_VALID_MASK) {
-		if (idtv_info_field & INTR_INFO_VALID_MASK) {
-			/* TODO: fault when IDT_Vectoring */
-			if (printk_ratelimit())
-				printk(KERN_ERR "Fault when IDT_Vectoring\n");
-		}
-		enable_intr_window(vcpu);
-		return;
+	exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+	if (cpu_has_virtual_nmis()) {
+		unblock_nmi = (exit_intr_info & INTR_INFO_UNBLOCK_NMI) != 0;
+		vector = exit_intr_info & INTR_INFO_VECTOR_MASK;
+		/*
+		 * SDM 3: 25.7.1.2
+		 * Re-set bit "block by NMI" before VM entry if vmexit caused by
+		 * a guest IRET fault.
+		 */
+		if (unblock_nmi && vector != DF_VECTOR)
+			vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO,
+				      GUEST_INTR_STATE_NMI);
 	}
-	if (unlikely(idtv_info_field & INTR_INFO_VALID_MASK)) {
-		if ((idtv_info_field & VECTORING_INFO_TYPE_MASK)
-		    == INTR_TYPE_EXT_INTR
-		    && vcpu->arch.rmode.active) {
-			u8 vect = idtv_info_field & VECTORING_INFO_VECTOR_MASK;
-
-			vmx_inject_irq(vcpu, vect);
-			enable_intr_window(vcpu);
-			return;
-		}
-
-		KVMTRACE_1D(REDELIVER_EVT, vcpu, idtv_info_field, handler);
 
+	idt_vectoring_info = vmx->idt_vectoring_info;
+	idtv_info_valid = idt_vectoring_info & VECTORING_INFO_VALID_MASK;
+	vector = idt_vectoring_info & VECTORING_INFO_VECTOR_MASK;
+	type = idt_vectoring_info & VECTORING_INFO_TYPE_MASK;
+	if (vmx->vcpu.arch.nmi_injected) {
 		/*
 		 * SDM 3: 25.7.1.2
 		 * Clear bit "block by NMI" before VM entry if a NMI delivery
 		 * faulted.
 		 */
-		if ((idtv_info_field & VECTORING_INFO_TYPE_MASK)
-		    == INTR_TYPE_NMI_INTR && cpu_has_virtual_nmis())
-			vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
-				vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
-				~GUEST_INTR_STATE_NMI);
-
-		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, idtv_info_field
-				& ~INTR_INFO_RESVD_BITS_MASK);
-		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN,
-				vmcs_read32(VM_EXIT_INSTRUCTION_LEN));
-
-		if (unlikely(idtv_info_field & INTR_INFO_DELIVER_CODE_MASK))
-			vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE,
-				vmcs_read32(IDT_VECTORING_ERROR_CODE));
-		enable_intr_window(vcpu);
-		return;
+		if (idtv_info_valid && type == INTR_TYPE_NMI_INTR)
+			vmcs_clear_bits(GUEST_INTERRUPTIBILITY_INFO,
+					GUEST_INTR_STATE_NMI);
+		else
+			vmx->vcpu.arch.nmi_injected = false;
+	}
+	kvm_clear_exception_queue(&vmx->vcpu);
+	if (idtv_info_valid && type == INTR_TYPE_EXCEPTION) {
+		if (idt_vectoring_info & VECTORING_INFO_DELIVER_CODE_MASK) {
+			error = vmcs_read32(IDT_VECTORING_ERROR_CODE);
+			kvm_queue_exception_e(&vmx->vcpu, vector, error);
+		} else
+			kvm_queue_exception(&vmx->vcpu, vector);
+		vmx->idt_vectoring_info = 0;
 	}
+	kvm_clear_interrupt_queue(&vmx->vcpu);
+	if (idtv_info_valid && type == INTR_TYPE_EXT_INTR) {
+		kvm_queue_interrupt(&vmx->vcpu, vector);
+		vmx->idt_vectoring_info = 0;
+	}
+}
+
+static void vmx_intr_assist(struct kvm_vcpu *vcpu)
+{
+	update_tpr_threshold(vcpu);
+
 	if (cpu_has_virtual_nmis()) {
-		/*
-		 * SDM 3: 25.7.1.2
-		 * Re-set bit "block by NMI" before VM entry if vmexit caused by
-		 * a guest IRET fault.
-		 */
-		if ((exit_intr_info_field & INTR_INFO_UNBLOCK_NMI) &&
-		    (exit_intr_info_field & INTR_INFO_VECTOR_MASK) != 8)
-			vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
-				vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) |
-				GUEST_INTR_STATE_NMI);
-		else if (vcpu->arch.nmi_pending) {
-			if (vmx_nmi_enabled(vcpu))
-				vmx_inject_nmi(vcpu);
+		if (vcpu->arch.nmi_pending && !vcpu->arch.nmi_injected) {
+			if (vmx_nmi_enabled(vcpu)) {
+				vcpu->arch.nmi_pending = false;
+				vcpu->arch.nmi_injected = true;
+			} else {
+				enable_intr_window(vcpu);
+				return;
+			}
+		}
+		if (vcpu->arch.nmi_injected) {
+			vmx_inject_nmi(vcpu);
 			enable_intr_window(vcpu);
 			return;
 		}
-
 	}
-	if (!kvm_cpu_has_interrupt(vcpu))
-		return;
-	if (vmx_irq_enabled(vcpu)) {
-		vector = kvm_cpu_get_interrupt(vcpu);
-		vmx_inject_irq(vcpu, vector);
-		kvm_timer_intr_post(vcpu, vector);
-	} else
-		enable_irq_window(vcpu);
+	if (!vcpu->arch.interrupt.pending && kvm_cpu_has_interrupt(vcpu)) {
+		if (vmx_irq_enabled(vcpu))
+			kvm_queue_interrupt(vcpu, kvm_cpu_get_interrupt(vcpu));
+		else
+			enable_irq_window(vcpu);
+	}
+	if (vcpu->arch.interrupt.pending) {
+		vmx_inject_irq(vcpu, vcpu->arch.interrupt.nr);
+		kvm_timer_intr_post(vcpu, vcpu->arch.interrupt.nr);
+	}
 }
 
 /*
@@ -2922,9 +3184,9 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 static void fixup_rmode_irq(struct vcpu_vmx *vmx)
 {
 	vmx->rmode.irq.pending = 0;
-	if (vmcs_readl(GUEST_RIP) + 1 != vmx->rmode.irq.rip)
+	if (kvm_rip_read(&vmx->vcpu) + 1 != vmx->rmode.irq.rip)
 		return;
-	vmcs_writel(GUEST_RIP, vmx->rmode.irq.rip);
+	kvm_rip_write(&vmx->vcpu, vmx->rmode.irq.rip);
 	if (vmx->idt_vectoring_info & VECTORING_INFO_VALID_MASK) {
 		vmx->idt_vectoring_info &= ~VECTORING_INFO_TYPE_MASK;
 		vmx->idt_vectoring_info |= INTR_TYPE_EXT_INTR;
@@ -2936,11 +3198,30 @@ static void fixup_rmode_irq(struct vcpu_vmx *vmx)
 		| vmx->rmode.irq.vector;
 }
 
+#ifdef CONFIG_X86_64
+#define R "r"
+#define Q "q"
+#else
+#define R "e"
+#define Q "l"
+#endif
+
 static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 intr_info;
 
+	/* Handle invalid guest state instead of entering VMX */
+	if (vmx->emulation_required && emulate_invalid_guest_state) {
+		handle_invalid_guest_state(vcpu, kvm_run);
+		return;
+	}
+
+	if (test_bit(VCPU_REGS_RSP, (unsigned long *)&vcpu->arch.regs_dirty))
+		vmcs_writel(GUEST_RSP, vcpu->arch.regs[VCPU_REGS_RSP]);
+	if (test_bit(VCPU_REGS_RIP, (unsigned long *)&vcpu->arch.regs_dirty))
+		vmcs_writel(GUEST_RIP, vcpu->arch.regs[VCPU_REGS_RIP]);
+
 	/*
 	 * Loading guest fpu may have cleared host cr0.ts
 	 */
@@ -2948,26 +3229,25 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	asm(
 		/* Store host registers */
-#ifdef CONFIG_X86_64
-		"push %%rdx; push %%rbp;"
-		"push %%rcx \n\t"
-#else
-		"push %%edx; push %%ebp;"
-		"push %%ecx \n\t"
-#endif
+		"push %%"R"dx; push %%"R"bp;"
+		"push %%"R"cx \n\t"
+		"cmp %%"R"sp, %c[host_rsp](%0) \n\t"
+		"je 1f \n\t"
+		"mov %%"R"sp, %c[host_rsp](%0) \n\t"
 		__ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
+		"1: \n\t"
 		/* Check if vmlaunch of vmresume is needed */
 		"cmpl $0, %c[launched](%0) \n\t"
 		/* Load guest registers.  Don't clobber flags. */
+		"mov %c[cr2](%0), %%"R"ax \n\t"
+		"mov %%"R"ax, %%cr2 \n\t"
+		"mov %c[rax](%0), %%"R"ax \n\t"
+		"mov %c[rbx](%0), %%"R"bx \n\t"
+		"mov %c[rdx](%0), %%"R"dx \n\t"
+		"mov %c[rsi](%0), %%"R"si \n\t"
+		"mov %c[rdi](%0), %%"R"di \n\t"
+		"mov %c[rbp](%0), %%"R"bp \n\t"
 #ifdef CONFIG_X86_64
-		"mov %c[cr2](%0), %%rax \n\t"
-		"mov %%rax, %%cr2 \n\t"
-		"mov %c[rax](%0), %%rax \n\t"
-		"mov %c[rbx](%0), %%rbx \n\t"
-		"mov %c[rdx](%0), %%rdx \n\t"
-		"mov %c[rsi](%0), %%rsi \n\t"
-		"mov %c[rdi](%0), %%rdi \n\t"
-		"mov %c[rbp](%0), %%rbp \n\t"
 		"mov %c[r8](%0),  %%r8  \n\t"
 		"mov %c[r9](%0),  %%r9  \n\t"
 		"mov %c[r10](%0), %%r10 \n\t"
@@ -2976,18 +3256,9 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		"mov %c[r13](%0), %%r13 \n\t"
 		"mov %c[r14](%0), %%r14 \n\t"
 		"mov %c[r15](%0), %%r15 \n\t"
-		"mov %c[rcx](%0), %%rcx \n\t" /* kills %0 (rcx) */
-#else
-		"mov %c[cr2](%0), %%eax \n\t"
-		"mov %%eax,   %%cr2 \n\t"
-		"mov %c[rax](%0), %%eax \n\t"
-		"mov %c[rbx](%0), %%ebx \n\t"
-		"mov %c[rdx](%0), %%edx \n\t"
-		"mov %c[rsi](%0), %%esi \n\t"
-		"mov %c[rdi](%0), %%edi \n\t"
-		"mov %c[rbp](%0), %%ebp \n\t"
-		"mov %c[rcx](%0), %%ecx \n\t" /* kills %0 (ecx) */
 #endif
+		"mov %c[rcx](%0), %%"R"cx \n\t" /* kills %0 (ecx) */
+
 		/* Enter guest mode */
 		"jne .Llaunched \n\t"
 		__ex(ASM_VMX_VMLAUNCH) "\n\t"
@@ -2995,15 +3266,15 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		".Llaunched: " __ex(ASM_VMX_VMRESUME) "\n\t"
 		".Lkvm_vmx_return: "
 		/* Save guest registers, load host registers, keep flags */
+		"xchg %0,     (%%"R"sp) \n\t"
+		"mov %%"R"ax, %c[rax](%0) \n\t"
+		"mov %%"R"bx, %c[rbx](%0) \n\t"
+		"push"Q" (%%"R"sp); pop"Q" %c[rcx](%0) \n\t"
+		"mov %%"R"dx, %c[rdx](%0) \n\t"
+		"mov %%"R"si, %c[rsi](%0) \n\t"
+		"mov %%"R"di, %c[rdi](%0) \n\t"
+		"mov %%"R"bp, %c[rbp](%0) \n\t"
 #ifdef CONFIG_X86_64
-		"xchg %0,     (%%rsp) \n\t"
-		"mov %%rax, %c[rax](%0) \n\t"
-		"mov %%rbx, %c[rbx](%0) \n\t"
-		"pushq (%%rsp); popq %c[rcx](%0) \n\t"
-		"mov %%rdx, %c[rdx](%0) \n\t"
-		"mov %%rsi, %c[rsi](%0) \n\t"
-		"mov %%rdi, %c[rdi](%0) \n\t"
-		"mov %%rbp, %c[rbp](%0) \n\t"
 		"mov %%r8,  %c[r8](%0) \n\t"
 		"mov %%r9,  %c[r9](%0) \n\t"
 		"mov %%r10, %c[r10](%0) \n\t"
@@ -3012,28 +3283,16 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		"mov %%r13, %c[r13](%0) \n\t"
 		"mov %%r14, %c[r14](%0) \n\t"
 		"mov %%r15, %c[r15](%0) \n\t"
-		"mov %%cr2, %%rax   \n\t"
-		"mov %%rax, %c[cr2](%0) \n\t"
-
-		"pop  %%rbp; pop  %%rbp; pop  %%rdx \n\t"
-#else
-		"xchg %0, (%%esp) \n\t"
-		"mov %%eax, %c[rax](%0) \n\t"
-		"mov %%ebx, %c[rbx](%0) \n\t"
-		"pushl (%%esp); popl %c[rcx](%0) \n\t"
-		"mov %%edx, %c[rdx](%0) \n\t"
-		"mov %%esi, %c[rsi](%0) \n\t"
-		"mov %%edi, %c[rdi](%0) \n\t"
-		"mov %%ebp, %c[rbp](%0) \n\t"
-		"mov %%cr2, %%eax  \n\t"
-		"mov %%eax, %c[cr2](%0) \n\t"
-
-		"pop %%ebp; pop %%ebp; pop %%edx \n\t"
 #endif
+		"mov %%cr2, %%"R"ax   \n\t"
+		"mov %%"R"ax, %c[cr2](%0) \n\t"
+
+		"pop  %%"R"bp; pop  %%"R"bp; pop  %%"R"dx \n\t"
 		"setbe %c[fail](%0) \n\t"
 	      : : "c"(vmx), "d"((unsigned long)HOST_RSP),
 		[launched]"i"(offsetof(struct vcpu_vmx, launched)),
 		[fail]"i"(offsetof(struct vcpu_vmx, fail)),
+		[host_rsp]"i"(offsetof(struct vcpu_vmx, host_rsp)),
 		[rax]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RAX])),
 		[rbx]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RBX])),
 		[rcx]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RCX])),
@@ -3053,14 +3312,15 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 #endif
 		[cr2]"i"(offsetof(struct vcpu_vmx, vcpu.arch.cr2))
 	      : "cc", "memory"
+		, R"bx", R"di", R"si"
 #ifdef CONFIG_X86_64
-		, "rbx", "rdi", "rsi"
 		, "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15"
-#else
-		, "ebx", "edi", "rsi"
 #endif
 	      );
 
+	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP));
+	vcpu->arch.regs_dirty = 0;
+
 	vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
 	if (vmx->rmode.irq.pending)
 		fixup_rmode_irq(vmx);
@@ -3080,8 +3340,13 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		KVMTRACE_0D(NMI, vcpu, handler);
 		asm("int $2");
 	}
+
+	vmx_complete_interrupts(vmx);
 }
 
+#undef R
+#undef Q
+
 static void vmx_free_vmcs(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -3224,8 +3489,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.set_idt = vmx_set_idt,
 	.get_gdt = vmx_get_gdt,
 	.set_gdt = vmx_set_gdt,
-	.cache_regs = vcpu_load_rsp_rip,
-	.decache_regs = vcpu_put_rsp_rip,
+	.cache_reg = vmx_cache_reg,
 	.get_rflags = vmx_get_rflags,
 	.set_rflags = vmx_set_rflags,
 
diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h
index 23e8373..3e010d2 100644
--- a/arch/x86/kvm/vmx.h
+++ b/arch/x86/kvm/vmx.h
@@ -331,24 +331,6 @@ enum vmcs_field {
 
 #define AR_RESERVD_MASK 0xfffe0f00
 
-#define MSR_IA32_VMX_BASIC                      0x480
-#define MSR_IA32_VMX_PINBASED_CTLS              0x481
-#define MSR_IA32_VMX_PROCBASED_CTLS             0x482
-#define MSR_IA32_VMX_EXIT_CTLS                  0x483
-#define MSR_IA32_VMX_ENTRY_CTLS                 0x484
-#define MSR_IA32_VMX_MISC                       0x485
-#define MSR_IA32_VMX_CR0_FIXED0                 0x486
-#define MSR_IA32_VMX_CR0_FIXED1                 0x487
-#define MSR_IA32_VMX_CR4_FIXED0                 0x488
-#define MSR_IA32_VMX_CR4_FIXED1                 0x489
-#define MSR_IA32_VMX_VMCS_ENUM                  0x48a
-#define MSR_IA32_VMX_PROCBASED_CTLS2            0x48b
-#define MSR_IA32_VMX_EPT_VPID_CAP               0x48c
-
-#define MSR_IA32_FEATURE_CONTROL                0x3a
-#define MSR_IA32_FEATURE_CONTROL_LOCKED         0x1
-#define MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED  0x4
-
 #define APIC_ACCESS_PAGE_PRIVATE_MEMSLOT	9
 #define IDENTITY_PAGETABLE_PRIVATE_MEMSLOT	10
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0d682fc..4f0677d 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4,10 +4,14 @@
  * derived from drivers/kvm/kvm_main.c
  *
  * Copyright (C) 2006 Qumranet, Inc.
+ * Copyright (C) 2008 Qumranet, Inc.
+ * Copyright IBM Corporation, 2008
  *
  * Authors:
  *   Avi Kivity   <avi@qumranet.com>
  *   Yaniv Kamay  <yaniv@qumranet.com>
+ *   Amit Shah    <amit.shah@qumranet.com>
+ *   Ben-Ami Yassour <benami@il.ibm.com>
  *
  * This work is licensed under the terms of the GNU GPL, version 2.  See
  * the COPYING file in the top-level directory.
@@ -19,14 +23,18 @@
 #include "mmu.h"
 #include "i8254.h"
 #include "tss.h"
+#include "kvm_cache_regs.h"
+#include "x86.h"
 
 #include <linux/clocksource.h>
+#include <linux/interrupt.h>
 #include <linux/kvm.h>
 #include <linux/fs.h>
 #include <linux/vmalloc.h>
 #include <linux/module.h>
 #include <linux/mman.h>
 #include <linux/highmem.h>
+#include <linux/intel-iommu.h>
 
 #include <asm/uaccess.h>
 #include <asm/msr.h>
@@ -61,6 +69,7 @@ static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 				    struct kvm_cpuid_entry2 __user *entries);
 
 struct kvm_x86_ops *kvm_x86_ops;
+EXPORT_SYMBOL_GPL(kvm_x86_ops);
 
 struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "pf_fixed", VCPU_STAT(pf_fixed) },
@@ -83,6 +92,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "fpu_reload", VCPU_STAT(fpu_reload) },
 	{ "insn_emulation", VCPU_STAT(insn_emulation) },
 	{ "insn_emulation_fail", VCPU_STAT(insn_emulation_fail) },
+	{ "irq_injections", VCPU_STAT(irq_injections) },
 	{ "mmu_shadow_zapped", VM_STAT(mmu_shadow_zapped) },
 	{ "mmu_pte_write", VM_STAT(mmu_pte_write) },
 	{ "mmu_pte_updated", VM_STAT(mmu_pte_updated) },
@@ -90,12 +100,12 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "mmu_flooded", VM_STAT(mmu_flooded) },
 	{ "mmu_recycled", VM_STAT(mmu_recycled) },
 	{ "mmu_cache_miss", VM_STAT(mmu_cache_miss) },
+	{ "mmu_unsync", VM_STAT(mmu_unsync) },
 	{ "remote_tlb_flush", VM_STAT(remote_tlb_flush) },
 	{ "largepages", VM_STAT(lpages) },
 	{ NULL }
 };
 
-
 unsigned long segment_base(u16 selector)
 {
 	struct descriptor_table gdt;
@@ -352,6 +362,7 @@ EXPORT_SYMBOL_GPL(kvm_set_cr4);
 void kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 {
 	if (cr3 == vcpu->arch.cr3 && !pdptrs_changed(vcpu)) {
+		kvm_mmu_sync_roots(vcpu);
 		kvm_mmu_flush_tlb(vcpu);
 		return;
 	}
@@ -564,7 +575,7 @@ static void kvm_set_time_scale(uint32_t tsc_khz, struct pvclock_vcpu_time_info *
 	hv_clock->tsc_to_system_mul = div_frac(nsecs, tps32);
 
 	pr_debug("%s: tsc_khz %u, tsc_shift %d, tsc_mul %u\n",
-		 __FUNCTION__, tsc_khz, hv_clock->tsc_shift,
+		 __func__, tsc_khz, hv_clock->tsc_shift,
 		 hv_clock->tsc_to_system_mul);
 }
 
@@ -662,6 +673,18 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		pr_unimpl(vcpu, "%s: MSR_IA32_MCG_CTL 0x%llx, nop\n",
 			__func__, data);
 		break;
+	case MSR_IA32_DEBUGCTLMSR:
+		if (!data) {
+			/* We support the non-activated case already */
+			break;
+		} else if (data & ~(DEBUGCTLMSR_LBR | DEBUGCTLMSR_BTF)) {
+			/* Values other than LBR and BTF are vendor-specific,
+			   thus reserved and should throw a #GP */
+			return 1;
+		}
+		pr_unimpl(vcpu, "%s: MSR_IA32_DEBUGCTLMSR 0x%llx, nop\n",
+			__func__, data);
+		break;
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_UCODE_WRITE:
 		break;
@@ -692,10 +715,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		/* ...but clean it before doing the actual write */
 		vcpu->arch.time_offset = data & ~(PAGE_MASK | 1);
 
-		down_read(&current->mm->mmap_sem);
 		vcpu->arch.time_page =
 				gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT);
-		up_read(&current->mm->mmap_sem);
 
 		if (is_error_page(vcpu->arch.time_page)) {
 			kvm_release_page_clean(vcpu->arch.time_page);
@@ -752,8 +773,14 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_MC0_MISC+8:
 	case MSR_IA32_MC0_MISC+12:
 	case MSR_IA32_MC0_MISC+16:
+	case MSR_IA32_MC0_MISC+20:
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_EBL_CR_POWERON:
+	case MSR_IA32_DEBUGCTLMSR:
+	case MSR_IA32_LASTBRANCHFROMIP:
+	case MSR_IA32_LASTBRANCHTOIP:
+	case MSR_IA32_LASTINTFROMIP:
+	case MSR_IA32_LASTINTTOIP:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
@@ -901,6 +928,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PV_MMU:
 		r = !tdp_enabled;
 		break;
+	case KVM_CAP_IOMMU:
+		r = intel_iommu_found();
+		break;
 	default:
 		r = 0;
 		break;
@@ -1303,28 +1333,33 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	struct kvm_vcpu *vcpu = filp->private_data;
 	void __user *argp = (void __user *)arg;
 	int r;
+	struct kvm_lapic_state *lapic = NULL;
 
 	switch (ioctl) {
 	case KVM_GET_LAPIC: {
-		struct kvm_lapic_state lapic;
+		lapic = kzalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
 
-		memset(&lapic, 0, sizeof lapic);
-		r = kvm_vcpu_ioctl_get_lapic(vcpu, &lapic);
+		r = -ENOMEM;
+		if (!lapic)
+			goto out;
+		r = kvm_vcpu_ioctl_get_lapic(vcpu, lapic);
 		if (r)
 			goto out;
 		r = -EFAULT;
-		if (copy_to_user(argp, &lapic, sizeof lapic))
+		if (copy_to_user(argp, lapic, sizeof(struct kvm_lapic_state)))
 			goto out;
 		r = 0;
 		break;
 	}
 	case KVM_SET_LAPIC: {
-		struct kvm_lapic_state lapic;
-
+		lapic = kmalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
+		r = -ENOMEM;
+		if (!lapic)
+			goto out;
 		r = -EFAULT;
-		if (copy_from_user(&lapic, argp, sizeof lapic))
+		if (copy_from_user(lapic, argp, sizeof(struct kvm_lapic_state)))
 			goto out;
-		r = kvm_vcpu_ioctl_set_lapic(vcpu, &lapic);;
+		r = kvm_vcpu_ioctl_set_lapic(vcpu, lapic);
 		if (r)
 			goto out;
 		r = 0;
@@ -1422,6 +1457,8 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = -EINVAL;
 	}
 out:
+	if (lapic)
+		kfree(lapic);
 	return r;
 }
 
@@ -1630,6 +1667,15 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	struct kvm *kvm = filp->private_data;
 	void __user *argp = (void __user *)arg;
 	int r = -EINVAL;
+	/*
+	 * This union makes it completely explicit to gcc-3.x
+	 * that these two variables' stack usage should be
+	 * combined, not added together.
+	 */
+	union {
+		struct kvm_pit_state ps;
+		struct kvm_memory_alias alias;
+	} u;
 
 	switch (ioctl) {
 	case KVM_SET_TSS_ADDR:
@@ -1661,17 +1707,14 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	case KVM_GET_NR_MMU_PAGES:
 		r = kvm_vm_ioctl_get_nr_mmu_pages(kvm);
 		break;
-	case KVM_SET_MEMORY_ALIAS: {
-		struct kvm_memory_alias alias;
-
+	case KVM_SET_MEMORY_ALIAS:
 		r = -EFAULT;
-		if (copy_from_user(&alias, argp, sizeof alias))
+		if (copy_from_user(&u.alias, argp, sizeof(struct kvm_memory_alias)))
 			goto out;
-		r = kvm_vm_ioctl_set_memory_alias(kvm, &alias);
+		r = kvm_vm_ioctl_set_memory_alias(kvm, &u.alias);
 		if (r)
 			goto out;
 		break;
-	}
 	case KVM_CREATE_IRQCHIP:
 		r = -ENOMEM;
 		kvm->arch.vpic = kvm_create_pic(kvm);
@@ -1699,13 +1742,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			mutex_lock(&kvm->lock);
-			if (irq_event.irq < 16)
-				kvm_pic_set_irq(pic_irqchip(kvm),
-					irq_event.irq,
-					irq_event.level);
-			kvm_ioapic_set_irq(kvm->arch.vioapic,
-					irq_event.irq,
-					irq_event.level);
+			kvm_set_irq(kvm, irq_event.irq, irq_event.level);
 			mutex_unlock(&kvm->lock);
 			r = 0;
 		}
@@ -1713,65 +1750,77 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	}
 	case KVM_GET_IRQCHIP: {
 		/* 0: PIC master, 1: PIC slave, 2: IOAPIC */
-		struct kvm_irqchip chip;
+		struct kvm_irqchip *chip = kmalloc(sizeof(*chip), GFP_KERNEL);
 
-		r = -EFAULT;
-		if (copy_from_user(&chip, argp, sizeof chip))
+		r = -ENOMEM;
+		if (!chip)
 			goto out;
+		r = -EFAULT;
+		if (copy_from_user(chip, argp, sizeof *chip))
+			goto get_irqchip_out;
 		r = -ENXIO;
 		if (!irqchip_in_kernel(kvm))
-			goto out;
-		r = kvm_vm_ioctl_get_irqchip(kvm, &chip);
+			goto get_irqchip_out;
+		r = kvm_vm_ioctl_get_irqchip(kvm, chip);
 		if (r)
-			goto out;
+			goto get_irqchip_out;
 		r = -EFAULT;
-		if (copy_to_user(argp, &chip, sizeof chip))
-			goto out;
+		if (copy_to_user(argp, chip, sizeof *chip))
+			goto get_irqchip_out;
 		r = 0;
+	get_irqchip_out:
+		kfree(chip);
+		if (r)
+			goto out;
 		break;
 	}
 	case KVM_SET_IRQCHIP: {
 		/* 0: PIC master, 1: PIC slave, 2: IOAPIC */
-		struct kvm_irqchip chip;
+		struct kvm_irqchip *chip = kmalloc(sizeof(*chip), GFP_KERNEL);
 
-		r = -EFAULT;
-		if (copy_from_user(&chip, argp, sizeof chip))
+		r = -ENOMEM;
+		if (!chip)
 			goto out;
+		r = -EFAULT;
+		if (copy_from_user(chip, argp, sizeof *chip))
+			goto set_irqchip_out;
 		r = -ENXIO;
 		if (!irqchip_in_kernel(kvm))
-			goto out;
-		r = kvm_vm_ioctl_set_irqchip(kvm, &chip);
+			goto set_irqchip_out;
+		r = kvm_vm_ioctl_set_irqchip(kvm, chip);
 		if (r)
-			goto out;
+			goto set_irqchip_out;
 		r = 0;
+	set_irqchip_out:
+		kfree(chip);
+		if (r)
+			goto out;
 		break;
 	}
 	case KVM_GET_PIT: {
-		struct kvm_pit_state ps;
 		r = -EFAULT;
-		if (copy_from_user(&ps, argp, sizeof ps))
+		if (copy_from_user(&u.ps, argp, sizeof(struct kvm_pit_state)))
 			goto out;
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
 			goto out;
-		r = kvm_vm_ioctl_get_pit(kvm, &ps);
+		r = kvm_vm_ioctl_get_pit(kvm, &u.ps);
 		if (r)
 			goto out;
 		r = -EFAULT;
-		if (copy_to_user(argp, &ps, sizeof ps))
+		if (copy_to_user(argp, &u.ps, sizeof(struct kvm_pit_state)))
 			goto out;
 		r = 0;
 		break;
 	}
 	case KVM_SET_PIT: {
-		struct kvm_pit_state ps;
 		r = -EFAULT;
-		if (copy_from_user(&ps, argp, sizeof ps))
+		if (copy_from_user(&u.ps, argp, sizeof u.ps))
 			goto out;
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
 			goto out;
-		r = kvm_vm_ioctl_set_pit(kvm, &ps);
+		r = kvm_vm_ioctl_set_pit(kvm, &u.ps);
 		if (r)
 			goto out;
 		r = 0;
@@ -2018,9 +2067,7 @@ static int emulator_cmpxchg_emulated(unsigned long addr,
 
 		val = *(u64 *)new;
 
-		down_read(&current->mm->mmap_sem);
 		page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
-		up_read(&current->mm->mmap_sem);
 
 		kaddr = kmap_atomic(page, KM_USER0);
 		set_64bit((u64 *)(kaddr + offset_in_page(gpa)), val);
@@ -2040,6 +2087,7 @@ static unsigned long get_segment_base(struct kvm_vcpu *vcpu, int seg)
 
 int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
 {
+	kvm_mmu_invlpg(vcpu, address);
 	return X86EMUL_CONTINUE;
 }
 
@@ -2080,7 +2128,7 @@ int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr, unsigned long value)
 void kvm_report_emulation_failure(struct kvm_vcpu *vcpu, const char *context)
 {
 	u8 opcodes[4];
-	unsigned long rip = vcpu->arch.rip;
+	unsigned long rip = kvm_rip_read(vcpu);
 	unsigned long rip_linear;
 
 	if (!printk_ratelimit())
@@ -2102,6 +2150,14 @@ static struct x86_emulate_ops emulate_ops = {
 	.cmpxchg_emulated    = emulator_cmpxchg_emulated,
 };
 
+static void cache_all_regs(struct kvm_vcpu *vcpu)
+{
+	kvm_register_read(vcpu, VCPU_REGS_RAX);
+	kvm_register_read(vcpu, VCPU_REGS_RSP);
+	kvm_register_read(vcpu, VCPU_REGS_RIP);
+	vcpu->arch.regs_dirty = ~0;
+}
+
 int emulate_instruction(struct kvm_vcpu *vcpu,
 			struct kvm_run *run,
 			unsigned long cr2,
@@ -2111,8 +2167,15 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 	int r;
 	struct decode_cache *c;
 
+	kvm_clear_exception_queue(vcpu);
 	vcpu->arch.mmio_fault_cr2 = cr2;
-	kvm_x86_ops->cache_regs(vcpu);
+	/*
+	 * TODO: fix x86_emulate.c to use guest_read/write_register
+	 * instead of direct ->regs accesses, can save hundred cycles
+	 * on Intel for instructions that don't read/change RSP, for
+	 * for example.
+	 */
+	cache_all_regs(vcpu);
 
 	vcpu->mmio_is_write = 0;
 	vcpu->arch.pio.string = 0;
@@ -2172,7 +2235,6 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 		return EMULATE_DO_MMIO;
 	}
 
-	kvm_x86_ops->decache_regs(vcpu);
 	kvm_x86_ops->set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
 
 	if (vcpu->mmio_is_write) {
@@ -2225,20 +2287,19 @@ int complete_pio(struct kvm_vcpu *vcpu)
 	struct kvm_pio_request *io = &vcpu->arch.pio;
 	long delta;
 	int r;
-
-	kvm_x86_ops->cache_regs(vcpu);
+	unsigned long val;
 
 	if (!io->string) {
-		if (io->in)
-			memcpy(&vcpu->arch.regs[VCPU_REGS_RAX], vcpu->arch.pio_data,
-			       io->size);
+		if (io->in) {
+			val = kvm_register_read(vcpu, VCPU_REGS_RAX);
+			memcpy(&val, vcpu->arch.pio_data, io->size);
+			kvm_register_write(vcpu, VCPU_REGS_RAX, val);
+		}
 	} else {
 		if (io->in) {
 			r = pio_copy_data(vcpu);
-			if (r) {
-				kvm_x86_ops->cache_regs(vcpu);
+			if (r)
 				return r;
-			}
 		}
 
 		delta = 1;
@@ -2248,19 +2309,24 @@ int complete_pio(struct kvm_vcpu *vcpu)
 			 * The size of the register should really depend on
 			 * current address size.
 			 */
-			vcpu->arch.regs[VCPU_REGS_RCX] -= delta;
+			val = kvm_register_read(vcpu, VCPU_REGS_RCX);
+			val -= delta;
+			kvm_register_write(vcpu, VCPU_REGS_RCX, val);
 		}
 		if (io->down)
 			delta = -delta;
 		delta *= io->size;
-		if (io->in)
-			vcpu->arch.regs[VCPU_REGS_RDI] += delta;
-		else
-			vcpu->arch.regs[VCPU_REGS_RSI] += delta;
+		if (io->in) {
+			val = kvm_register_read(vcpu, VCPU_REGS_RDI);
+			val += delta;
+			kvm_register_write(vcpu, VCPU_REGS_RDI, val);
+		} else {
+			val = kvm_register_read(vcpu, VCPU_REGS_RSI);
+			val += delta;
+			kvm_register_write(vcpu, VCPU_REGS_RSI, val);
+		}
 	}
 
-	kvm_x86_ops->decache_regs(vcpu);
-
 	io->count -= io->cur_count;
 	io->cur_count = 0;
 
@@ -2313,6 +2379,7 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 		  int size, unsigned port)
 {
 	struct kvm_io_device *pio_dev;
+	unsigned long val;
 
 	vcpu->run->exit_reason = KVM_EXIT_IO;
 	vcpu->run->io.direction = in ? KVM_EXIT_IO_IN : KVM_EXIT_IO_OUT;
@@ -2333,8 +2400,8 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 		KVMTRACE_2D(IO_WRITE, vcpu, vcpu->run->io.port, (u32)size,
 			    handler);
 
-	kvm_x86_ops->cache_regs(vcpu);
-	memcpy(vcpu->arch.pio_data, &vcpu->arch.regs[VCPU_REGS_RAX], 4);
+	val = kvm_register_read(vcpu, VCPU_REGS_RAX);
+	memcpy(vcpu->arch.pio_data, &val, 4);
 
 	kvm_x86_ops->skip_emulated_instruction(vcpu);
 
@@ -2492,11 +2559,6 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 	KVMTRACE_0D(HLT, vcpu, handler);
 	if (irqchip_in_kernel(vcpu->kvm)) {
 		vcpu->arch.mp_state = KVM_MP_STATE_HALTED;
-		up_read(&vcpu->kvm->slots_lock);
-		kvm_vcpu_block(vcpu);
-		down_read(&vcpu->kvm->slots_lock);
-		if (vcpu->arch.mp_state != KVM_MP_STATE_RUNNABLE)
-			return -EINTR;
 		return 1;
 	} else {
 		vcpu->run->exit_reason = KVM_EXIT_HLT;
@@ -2519,13 +2581,11 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 	unsigned long nr, a0, a1, a2, a3, ret;
 	int r = 1;
 
-	kvm_x86_ops->cache_regs(vcpu);
-
-	nr = vcpu->arch.regs[VCPU_REGS_RAX];
-	a0 = vcpu->arch.regs[VCPU_REGS_RBX];
-	a1 = vcpu->arch.regs[VCPU_REGS_RCX];
-	a2 = vcpu->arch.regs[VCPU_REGS_RDX];
-	a3 = vcpu->arch.regs[VCPU_REGS_RSI];
+	nr = kvm_register_read(vcpu, VCPU_REGS_RAX);
+	a0 = kvm_register_read(vcpu, VCPU_REGS_RBX);
+	a1 = kvm_register_read(vcpu, VCPU_REGS_RCX);
+	a2 = kvm_register_read(vcpu, VCPU_REGS_RDX);
+	a3 = kvm_register_read(vcpu, VCPU_REGS_RSI);
 
 	KVMTRACE_1D(VMMCALL, vcpu, (u32)nr, handler);
 
@@ -2548,8 +2608,7 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 		ret = -KVM_ENOSYS;
 		break;
 	}
-	vcpu->arch.regs[VCPU_REGS_RAX] = ret;
-	kvm_x86_ops->decache_regs(vcpu);
+	kvm_register_write(vcpu, VCPU_REGS_RAX, ret);
 	++vcpu->stat.hypercalls;
 	return r;
 }
@@ -2559,6 +2618,7 @@ int kvm_fix_hypercall(struct kvm_vcpu *vcpu)
 {
 	char instruction[3];
 	int ret = 0;
+	unsigned long rip = kvm_rip_read(vcpu);
 
 
 	/*
@@ -2568,9 +2628,8 @@ int kvm_fix_hypercall(struct kvm_vcpu *vcpu)
 	 */
 	kvm_mmu_zap_all(vcpu->kvm);
 
-	kvm_x86_ops->cache_regs(vcpu);
 	kvm_x86_ops->patch_hypercall(vcpu, instruction);
-	if (emulator_write_emulated(vcpu->arch.rip, instruction, 3, vcpu)
+	if (emulator_write_emulated(rip, instruction, 3, vcpu)
 	    != X86EMUL_CONTINUE)
 		ret = -EFAULT;
 
@@ -2700,13 +2759,12 @@ void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
 	u32 function, index;
 	struct kvm_cpuid_entry2 *e, *best;
 
-	kvm_x86_ops->cache_regs(vcpu);
-	function = vcpu->arch.regs[VCPU_REGS_RAX];
-	index = vcpu->arch.regs[VCPU_REGS_RCX];
-	vcpu->arch.regs[VCPU_REGS_RAX] = 0;
-	vcpu->arch.regs[VCPU_REGS_RBX] = 0;
-	vcpu->arch.regs[VCPU_REGS_RCX] = 0;
-	vcpu->arch.regs[VCPU_REGS_RDX] = 0;
+	function = kvm_register_read(vcpu, VCPU_REGS_RAX);
+	index = kvm_register_read(vcpu, VCPU_REGS_RCX);
+	kvm_register_write(vcpu, VCPU_REGS_RAX, 0);
+	kvm_register_write(vcpu, VCPU_REGS_RBX, 0);
+	kvm_register_write(vcpu, VCPU_REGS_RCX, 0);
+	kvm_register_write(vcpu, VCPU_REGS_RDX, 0);
 	best = NULL;
 	for (i = 0; i < vcpu->arch.cpuid_nent; ++i) {
 		e = &vcpu->arch.cpuid_entries[i];
@@ -2724,18 +2782,17 @@ void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
 				best = e;
 	}
 	if (best) {
-		vcpu->arch.regs[VCPU_REGS_RAX] = best->eax;
-		vcpu->arch.regs[VCPU_REGS_RBX] = best->ebx;
-		vcpu->arch.regs[VCPU_REGS_RCX] = best->ecx;
-		vcpu->arch.regs[VCPU_REGS_RDX] = best->edx;
+		kvm_register_write(vcpu, VCPU_REGS_RAX, best->eax);
+		kvm_register_write(vcpu, VCPU_REGS_RBX, best->ebx);
+		kvm_register_write(vcpu, VCPU_REGS_RCX, best->ecx);
+		kvm_register_write(vcpu, VCPU_REGS_RDX, best->edx);
 	}
-	kvm_x86_ops->decache_regs(vcpu);
 	kvm_x86_ops->skip_emulated_instruction(vcpu);
 	KVMTRACE_5D(CPUID, vcpu, function,
-		    (u32)vcpu->arch.regs[VCPU_REGS_RAX],
-		    (u32)vcpu->arch.regs[VCPU_REGS_RBX],
-		    (u32)vcpu->arch.regs[VCPU_REGS_RCX],
-		    (u32)vcpu->arch.regs[VCPU_REGS_RDX], handler);
+		    (u32)kvm_register_read(vcpu, VCPU_REGS_RAX),
+		    (u32)kvm_register_read(vcpu, VCPU_REGS_RBX),
+		    (u32)kvm_register_read(vcpu, VCPU_REGS_RCX),
+		    (u32)kvm_register_read(vcpu, VCPU_REGS_RDX), handler);
 }
 EXPORT_SYMBOL_GPL(kvm_emulate_cpuid);
 
@@ -2776,9 +2833,7 @@ static void vapic_enter(struct kvm_vcpu *vcpu)
 	if (!apic || !apic->vapic_addr)
 		return;
 
-	down_read(&current->mm->mmap_sem);
 	page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
-	up_read(&current->mm->mmap_sem);
 
 	vcpu->arch.apic->vapic_page = page;
 }
@@ -2796,28 +2851,10 @@ static void vapic_exit(struct kvm_vcpu *vcpu)
 	up_read(&vcpu->kvm->slots_lock);
 }
 
-static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	int r;
 
-	if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED)) {
-		pr_debug("vcpu %d received sipi with vector # %x\n",
-		       vcpu->vcpu_id, vcpu->arch.sipi_vector);
-		kvm_lapic_reset(vcpu);
-		r = kvm_x86_ops->vcpu_reset(vcpu);
-		if (r)
-			return r;
-		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
-	}
-
-	down_read(&vcpu->kvm->slots_lock);
-	vapic_enter(vcpu);
-
-preempted:
-	if (vcpu->guest_debug.enabled)
-		kvm_x86_ops->guest_debug_pre(vcpu);
-
-again:
 	if (vcpu->requests)
 		if (test_and_clear_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
 			kvm_mmu_unload(vcpu);
@@ -2829,6 +2866,8 @@ again:
 	if (vcpu->requests) {
 		if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests))
 			__kvm_migrate_timers(vcpu);
+		if (test_and_clear_bit(KVM_REQ_MMU_SYNC, &vcpu->requests))
+			kvm_mmu_sync_roots(vcpu);
 		if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests))
 			kvm_x86_ops->tlb_flush(vcpu);
 		if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS,
@@ -2854,21 +2893,15 @@ again:
 
 	local_irq_disable();
 
-	if (vcpu->requests || need_resched()) {
+	if (vcpu->requests || need_resched() || signal_pending(current)) {
 		local_irq_enable();
 		preempt_enable();
 		r = 1;
 		goto out;
 	}
 
-	if (signal_pending(current)) {
-		local_irq_enable();
-		preempt_enable();
-		r = -EINTR;
-		kvm_run->exit_reason = KVM_EXIT_INTR;
-		++vcpu->stat.signal_exits;
-		goto out;
-	}
+	if (vcpu->guest_debug.enabled)
+		kvm_x86_ops->guest_debug_pre(vcpu);
 
 	vcpu->guest_mode = 1;
 	/*
@@ -2917,8 +2950,8 @@ again:
 	 * Profile KVM exit RIPs:
 	 */
 	if (unlikely(prof_on == KVM_PROFILING)) {
-		kvm_x86_ops->cache_regs(vcpu);
-		profile_hit(KVM_PROFILING, (void *)vcpu->arch.rip);
+		unsigned long rip = kvm_rip_read(vcpu);
+		profile_hit(KVM_PROFILING, (void *)rip);
 	}
 
 	if (vcpu->arch.exception.pending && kvm_x86_ops->exception_injected(vcpu))
@@ -2927,26 +2960,63 @@ again:
 	kvm_lapic_sync_from_vapic(vcpu);
 
 	r = kvm_x86_ops->handle_exit(kvm_run, vcpu);
+out:
+	return r;
+}
 
-	if (r > 0) {
-		if (dm_request_for_irq_injection(vcpu, kvm_run)) {
-			r = -EINTR;
-			kvm_run->exit_reason = KVM_EXIT_INTR;
-			++vcpu->stat.request_irq_exits;
-			goto out;
-		}
-		if (!need_resched())
-			goto again;
+static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	int r;
+
+	if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED)) {
+		pr_debug("vcpu %d received sipi with vector # %x\n",
+			 vcpu->vcpu_id, vcpu->arch.sipi_vector);
+		kvm_lapic_reset(vcpu);
+		r = kvm_x86_ops->vcpu_reset(vcpu);
+		if (r)
+			return r;
+		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 	}
 
-out:
-	up_read(&vcpu->kvm->slots_lock);
-	if (r > 0) {
-		kvm_resched(vcpu);
-		down_read(&vcpu->kvm->slots_lock);
-		goto preempted;
+	down_read(&vcpu->kvm->slots_lock);
+	vapic_enter(vcpu);
+
+	r = 1;
+	while (r > 0) {
+		if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE)
+			r = vcpu_enter_guest(vcpu, kvm_run);
+		else {
+			up_read(&vcpu->kvm->slots_lock);
+			kvm_vcpu_block(vcpu);
+			down_read(&vcpu->kvm->slots_lock);
+			if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests))
+				if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED)
+					vcpu->arch.mp_state =
+							KVM_MP_STATE_RUNNABLE;
+			if (vcpu->arch.mp_state != KVM_MP_STATE_RUNNABLE)
+				r = -EINTR;
+		}
+
+		if (r > 0) {
+			if (dm_request_for_irq_injection(vcpu, kvm_run)) {
+				r = -EINTR;
+				kvm_run->exit_reason = KVM_EXIT_INTR;
+				++vcpu->stat.request_irq_exits;
+			}
+			if (signal_pending(current)) {
+				r = -EINTR;
+				kvm_run->exit_reason = KVM_EXIT_INTR;
+				++vcpu->stat.signal_exits;
+			}
+			if (need_resched()) {
+				up_read(&vcpu->kvm->slots_lock);
+				kvm_resched(vcpu);
+				down_read(&vcpu->kvm->slots_lock);
+			}
+		}
 	}
 
+	up_read(&vcpu->kvm->slots_lock);
 	post_kvm_run_save(vcpu, kvm_run);
 
 	vapic_exit(vcpu);
@@ -2966,6 +3036,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) {
 		kvm_vcpu_block(vcpu);
+		clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
 		r = -EAGAIN;
 		goto out;
 	}
@@ -2999,11 +3070,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		}
 	}
 #endif
-	if (kvm_run->exit_reason == KVM_EXIT_HYPERCALL) {
-		kvm_x86_ops->cache_regs(vcpu);
-		vcpu->arch.regs[VCPU_REGS_RAX] = kvm_run->hypercall.ret;
-		kvm_x86_ops->decache_regs(vcpu);
-	}
+	if (kvm_run->exit_reason == KVM_EXIT_HYPERCALL)
+		kvm_register_write(vcpu, VCPU_REGS_RAX,
+				     kvm_run->hypercall.ret);
 
 	r = __vcpu_run(vcpu, kvm_run);
 
@@ -3019,28 +3088,26 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	vcpu_load(vcpu);
 
-	kvm_x86_ops->cache_regs(vcpu);
-
-	regs->rax = vcpu->arch.regs[VCPU_REGS_RAX];
-	regs->rbx = vcpu->arch.regs[VCPU_REGS_RBX];
-	regs->rcx = vcpu->arch.regs[VCPU_REGS_RCX];
-	regs->rdx = vcpu->arch.regs[VCPU_REGS_RDX];
-	regs->rsi = vcpu->arch.regs[VCPU_REGS_RSI];
-	regs->rdi = vcpu->arch.regs[VCPU_REGS_RDI];
-	regs->rsp = vcpu->arch.regs[VCPU_REGS_RSP];
-	regs->rbp = vcpu->arch.regs[VCPU_REGS_RBP];
+	regs->rax = kvm_register_read(vcpu, VCPU_REGS_RAX);
+	regs->rbx = kvm_register_read(vcpu, VCPU_REGS_RBX);
+	regs->rcx = kvm_register_read(vcpu, VCPU_REGS_RCX);
+	regs->rdx = kvm_register_read(vcpu, VCPU_REGS_RDX);
+	regs->rsi = kvm_register_read(vcpu, VCPU_REGS_RSI);
+	regs->rdi = kvm_register_read(vcpu, VCPU_REGS_RDI);
+	regs->rsp = kvm_register_read(vcpu, VCPU_REGS_RSP);
+	regs->rbp = kvm_register_read(vcpu, VCPU_REGS_RBP);
 #ifdef CONFIG_X86_64
-	regs->r8 = vcpu->arch.regs[VCPU_REGS_R8];
-	regs->r9 = vcpu->arch.regs[VCPU_REGS_R9];
-	regs->r10 = vcpu->arch.regs[VCPU_REGS_R10];
-	regs->r11 = vcpu->arch.regs[VCPU_REGS_R11];
-	regs->r12 = vcpu->arch.regs[VCPU_REGS_R12];
-	regs->r13 = vcpu->arch.regs[VCPU_REGS_R13];
-	regs->r14 = vcpu->arch.regs[VCPU_REGS_R14];
-	regs->r15 = vcpu->arch.regs[VCPU_REGS_R15];
+	regs->r8 = kvm_register_read(vcpu, VCPU_REGS_R8);
+	regs->r9 = kvm_register_read(vcpu, VCPU_REGS_R9);
+	regs->r10 = kvm_register_read(vcpu, VCPU_REGS_R10);
+	regs->r11 = kvm_register_read(vcpu, VCPU_REGS_R11);
+	regs->r12 = kvm_register_read(vcpu, VCPU_REGS_R12);
+	regs->r13 = kvm_register_read(vcpu, VCPU_REGS_R13);
+	regs->r14 = kvm_register_read(vcpu, VCPU_REGS_R14);
+	regs->r15 = kvm_register_read(vcpu, VCPU_REGS_R15);
 #endif
 
-	regs->rip = vcpu->arch.rip;
+	regs->rip = kvm_rip_read(vcpu);
 	regs->rflags = kvm_x86_ops->get_rflags(vcpu);
 
 	/*
@@ -3058,29 +3125,29 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	vcpu_load(vcpu);
 
-	vcpu->arch.regs[VCPU_REGS_RAX] = regs->rax;
-	vcpu->arch.regs[VCPU_REGS_RBX] = regs->rbx;
-	vcpu->arch.regs[VCPU_REGS_RCX] = regs->rcx;
-	vcpu->arch.regs[VCPU_REGS_RDX] = regs->rdx;
-	vcpu->arch.regs[VCPU_REGS_RSI] = regs->rsi;
-	vcpu->arch.regs[VCPU_REGS_RDI] = regs->rdi;
-	vcpu->arch.regs[VCPU_REGS_RSP] = regs->rsp;
-	vcpu->arch.regs[VCPU_REGS_RBP] = regs->rbp;
+	kvm_register_write(vcpu, VCPU_REGS_RAX, regs->rax);
+	kvm_register_write(vcpu, VCPU_REGS_RBX, regs->rbx);
+	kvm_register_write(vcpu, VCPU_REGS_RCX, regs->rcx);
+	kvm_register_write(vcpu, VCPU_REGS_RDX, regs->rdx);
+	kvm_register_write(vcpu, VCPU_REGS_RSI, regs->rsi);
+	kvm_register_write(vcpu, VCPU_REGS_RDI, regs->rdi);
+	kvm_register_write(vcpu, VCPU_REGS_RSP, regs->rsp);
+	kvm_register_write(vcpu, VCPU_REGS_RBP, regs->rbp);
 #ifdef CONFIG_X86_64
-	vcpu->arch.regs[VCPU_REGS_R8] = regs->r8;
-	vcpu->arch.regs[VCPU_REGS_R9] = regs->r9;
-	vcpu->arch.regs[VCPU_REGS_R10] = regs->r10;
-	vcpu->arch.regs[VCPU_REGS_R11] = regs->r11;
-	vcpu->arch.regs[VCPU_REGS_R12] = regs->r12;
-	vcpu->arch.regs[VCPU_REGS_R13] = regs->r13;
-	vcpu->arch.regs[VCPU_REGS_R14] = regs->r14;
-	vcpu->arch.regs[VCPU_REGS_R15] = regs->r15;
+	kvm_register_write(vcpu, VCPU_REGS_R8, regs->r8);
+	kvm_register_write(vcpu, VCPU_REGS_R9, regs->r9);
+	kvm_register_write(vcpu, VCPU_REGS_R10, regs->r10);
+	kvm_register_write(vcpu, VCPU_REGS_R11, regs->r11);
+	kvm_register_write(vcpu, VCPU_REGS_R12, regs->r12);
+	kvm_register_write(vcpu, VCPU_REGS_R13, regs->r13);
+	kvm_register_write(vcpu, VCPU_REGS_R14, regs->r14);
+	kvm_register_write(vcpu, VCPU_REGS_R15, regs->r15);
+
 #endif
 
-	vcpu->arch.rip = regs->rip;
+	kvm_rip_write(vcpu, regs->rip);
 	kvm_x86_ops->set_rflags(vcpu, regs->rflags);
 
-	kvm_x86_ops->decache_regs(vcpu);
 
 	vcpu->arch.exception.pending = false;
 
@@ -3294,11 +3361,33 @@ static int load_segment_descriptor_to_kvm_desct(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+static int kvm_load_realmode_segment(struct kvm_vcpu *vcpu, u16 selector, int seg)
+{
+	struct kvm_segment segvar = {
+		.base = selector << 4,
+		.limit = 0xffff,
+		.selector = selector,
+		.type = 3,
+		.present = 1,
+		.dpl = 3,
+		.db = 0,
+		.s = 1,
+		.l = 0,
+		.g = 0,
+		.avl = 0,
+		.unusable = 0,
+	};
+	kvm_x86_ops->set_segment(vcpu, &segvar, seg);
+	return 0;
+}
+
 int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 				int type_bits, int seg)
 {
 	struct kvm_segment kvm_seg;
 
+	if (!(vcpu->arch.cr0 & X86_CR0_PE))
+		return kvm_load_realmode_segment(vcpu, selector, seg);
 	if (load_segment_descriptor_to_kvm_desct(vcpu, selector, &kvm_seg))
 		return 1;
 	kvm_seg.type |= type_bits;
@@ -3316,17 +3405,16 @@ static void save_state_to_tss32(struct kvm_vcpu *vcpu,
 				struct tss_segment_32 *tss)
 {
 	tss->cr3 = vcpu->arch.cr3;
-	tss->eip = vcpu->arch.rip;
+	tss->eip = kvm_rip_read(vcpu);
 	tss->eflags = kvm_x86_ops->get_rflags(vcpu);
-	tss->eax = vcpu->arch.regs[VCPU_REGS_RAX];
-	tss->ecx = vcpu->arch.regs[VCPU_REGS_RCX];
-	tss->edx = vcpu->arch.regs[VCPU_REGS_RDX];
-	tss->ebx = vcpu->arch.regs[VCPU_REGS_RBX];
-	tss->esp = vcpu->arch.regs[VCPU_REGS_RSP];
-	tss->ebp = vcpu->arch.regs[VCPU_REGS_RBP];
-	tss->esi = vcpu->arch.regs[VCPU_REGS_RSI];
-	tss->edi = vcpu->arch.regs[VCPU_REGS_RDI];
-
+	tss->eax = kvm_register_read(vcpu, VCPU_REGS_RAX);
+	tss->ecx = kvm_register_read(vcpu, VCPU_REGS_RCX);
+	tss->edx = kvm_register_read(vcpu, VCPU_REGS_RDX);
+	tss->ebx = kvm_register_read(vcpu, VCPU_REGS_RBX);
+	tss->esp = kvm_register_read(vcpu, VCPU_REGS_RSP);
+	tss->ebp = kvm_register_read(vcpu, VCPU_REGS_RBP);
+	tss->esi = kvm_register_read(vcpu, VCPU_REGS_RSI);
+	tss->edi = kvm_register_read(vcpu, VCPU_REGS_RDI);
 	tss->es = get_segment_selector(vcpu, VCPU_SREG_ES);
 	tss->cs = get_segment_selector(vcpu, VCPU_SREG_CS);
 	tss->ss = get_segment_selector(vcpu, VCPU_SREG_SS);
@@ -3342,17 +3430,17 @@ static int load_state_from_tss32(struct kvm_vcpu *vcpu,
 {
 	kvm_set_cr3(vcpu, tss->cr3);
 
-	vcpu->arch.rip = tss->eip;
+	kvm_rip_write(vcpu, tss->eip);
 	kvm_x86_ops->set_rflags(vcpu, tss->eflags | 2);
 
-	vcpu->arch.regs[VCPU_REGS_RAX] = tss->eax;
-	vcpu->arch.regs[VCPU_REGS_RCX] = tss->ecx;
-	vcpu->arch.regs[VCPU_REGS_RDX] = tss->edx;
-	vcpu->arch.regs[VCPU_REGS_RBX] = tss->ebx;
-	vcpu->arch.regs[VCPU_REGS_RSP] = tss->esp;
-	vcpu->arch.regs[VCPU_REGS_RBP] = tss->ebp;
-	vcpu->arch.regs[VCPU_REGS_RSI] = tss->esi;
-	vcpu->arch.regs[VCPU_REGS_RDI] = tss->edi;
+	kvm_register_write(vcpu, VCPU_REGS_RAX, tss->eax);
+	kvm_register_write(vcpu, VCPU_REGS_RCX, tss->ecx);
+	kvm_register_write(vcpu, VCPU_REGS_RDX, tss->edx);
+	kvm_register_write(vcpu, VCPU_REGS_RBX, tss->ebx);
+	kvm_register_write(vcpu, VCPU_REGS_RSP, tss->esp);
+	kvm_register_write(vcpu, VCPU_REGS_RBP, tss->ebp);
+	kvm_register_write(vcpu, VCPU_REGS_RSI, tss->esi);
+	kvm_register_write(vcpu, VCPU_REGS_RDI, tss->edi);
 
 	if (kvm_load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
 		return 1;
@@ -3380,16 +3468,16 @@ static int load_state_from_tss32(struct kvm_vcpu *vcpu,
 static void save_state_to_tss16(struct kvm_vcpu *vcpu,
 				struct tss_segment_16 *tss)
 {
-	tss->ip = vcpu->arch.rip;
+	tss->ip = kvm_rip_read(vcpu);
 	tss->flag = kvm_x86_ops->get_rflags(vcpu);
-	tss->ax = vcpu->arch.regs[VCPU_REGS_RAX];
-	tss->cx = vcpu->arch.regs[VCPU_REGS_RCX];
-	tss->dx = vcpu->arch.regs[VCPU_REGS_RDX];
-	tss->bx = vcpu->arch.regs[VCPU_REGS_RBX];
-	tss->sp = vcpu->arch.regs[VCPU_REGS_RSP];
-	tss->bp = vcpu->arch.regs[VCPU_REGS_RBP];
-	tss->si = vcpu->arch.regs[VCPU_REGS_RSI];
-	tss->di = vcpu->arch.regs[VCPU_REGS_RDI];
+	tss->ax = kvm_register_read(vcpu, VCPU_REGS_RAX);
+	tss->cx = kvm_register_read(vcpu, VCPU_REGS_RCX);
+	tss->dx = kvm_register_read(vcpu, VCPU_REGS_RDX);
+	tss->bx = kvm_register_read(vcpu, VCPU_REGS_RBX);
+	tss->sp = kvm_register_read(vcpu, VCPU_REGS_RSP);
+	tss->bp = kvm_register_read(vcpu, VCPU_REGS_RBP);
+	tss->si = kvm_register_read(vcpu, VCPU_REGS_RSI);
+	tss->di = kvm_register_read(vcpu, VCPU_REGS_RDI);
 
 	tss->es = get_segment_selector(vcpu, VCPU_SREG_ES);
 	tss->cs = get_segment_selector(vcpu, VCPU_SREG_CS);
@@ -3402,16 +3490,16 @@ static void save_state_to_tss16(struct kvm_vcpu *vcpu,
 static int load_state_from_tss16(struct kvm_vcpu *vcpu,
 				 struct tss_segment_16 *tss)
 {
-	vcpu->arch.rip = tss->ip;
+	kvm_rip_write(vcpu, tss->ip);
 	kvm_x86_ops->set_rflags(vcpu, tss->flag | 2);
-	vcpu->arch.regs[VCPU_REGS_RAX] = tss->ax;
-	vcpu->arch.regs[VCPU_REGS_RCX] = tss->cx;
-	vcpu->arch.regs[VCPU_REGS_RDX] = tss->dx;
-	vcpu->arch.regs[VCPU_REGS_RBX] = tss->bx;
-	vcpu->arch.regs[VCPU_REGS_RSP] = tss->sp;
-	vcpu->arch.regs[VCPU_REGS_RBP] = tss->bp;
-	vcpu->arch.regs[VCPU_REGS_RSI] = tss->si;
-	vcpu->arch.regs[VCPU_REGS_RDI] = tss->di;
+	kvm_register_write(vcpu, VCPU_REGS_RAX, tss->ax);
+	kvm_register_write(vcpu, VCPU_REGS_RCX, tss->cx);
+	kvm_register_write(vcpu, VCPU_REGS_RDX, tss->dx);
+	kvm_register_write(vcpu, VCPU_REGS_RBX, tss->bx);
+	kvm_register_write(vcpu, VCPU_REGS_RSP, tss->sp);
+	kvm_register_write(vcpu, VCPU_REGS_RBP, tss->bp);
+	kvm_register_write(vcpu, VCPU_REGS_RSI, tss->si);
+	kvm_register_write(vcpu, VCPU_REGS_RDI, tss->di);
 
 	if (kvm_load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
 		return 1;
@@ -3534,7 +3622,6 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	}
 
 	kvm_x86_ops->skip_emulated_instruction(vcpu);
-	kvm_x86_ops->cache_regs(vcpu);
 
 	if (nseg_desc.type & 8)
 		ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_base,
@@ -3559,7 +3646,6 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	tr_seg.type = 11;
 	kvm_set_segment(vcpu, &tr_seg, VCPU_SREG_TR);
 out:
-	kvm_x86_ops->decache_regs(vcpu);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(kvm_task_switch);
@@ -3622,6 +3708,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 			pr_debug("Set back pending irq %d\n",
 				 pending_vec);
 		}
+		kvm_pic_clear_isr_ack(vcpu->kvm);
 	}
 
 	kvm_set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
@@ -3634,6 +3721,12 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	kvm_set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
 	kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
+	/* Older userspace won't unhalt the vcpu on reset. */
+	if (vcpu->vcpu_id == 0 && kvm_rip_read(vcpu) == 0xfff0 &&
+	    sregs->cs.selector == 0xf000 && sregs->cs.base == 0xffff0000 &&
+	    !(vcpu->arch.cr0 & X86_CR0_PE))
+		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+
 	vcpu_put(vcpu);
 
 	return 0;
@@ -3918,6 +4011,7 @@ struct  kvm *kvm_arch_create_vm(void)
 		return ERR_PTR(-ENOMEM);
 
 	INIT_LIST_HEAD(&kvm->arch.active_mmu_pages);
+	INIT_LIST_HEAD(&kvm->arch.assigned_dev_head);
 
 	return kvm;
 }
@@ -3950,6 +4044,8 @@ static void kvm_free_vcpus(struct kvm *kvm)
 
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
+	kvm_iommu_unmap_guest(kvm);
+	kvm_free_all_assigned_devices(kvm);
 	kvm_free_pit(kvm);
 	kfree(kvm->arch.vpic);
 	kfree(kvm->arch.vioapic);
@@ -3981,7 +4077,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 			userspace_addr = do_mmap(NULL, 0,
 						 npages * PAGE_SIZE,
 						 PROT_READ | PROT_WRITE,
-						 MAP_SHARED | MAP_ANONYMOUS,
+						 MAP_PRIVATE | MAP_ANONYMOUS,
 						 0);
 			up_write(&current->mm->mmap_sem);
 
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
new file mode 100644
index 0000000..6a4be78
--- /dev/null
+++ b/arch/x86/kvm/x86.h
@@ -0,0 +1,22 @@
+#ifndef ARCH_X86_KVM_X86_H
+#define ARCH_X86_KVM_X86_H
+
+#include <linux/kvm_host.h>
+
+static inline void kvm_clear_exception_queue(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.exception.pending = false;
+}
+
+static inline void kvm_queue_interrupt(struct kvm_vcpu *vcpu, u8 vector)
+{
+	vcpu->arch.interrupt.pending = true;
+	vcpu->arch.interrupt.nr = vector;
+}
+
+static inline void kvm_clear_interrupt_queue(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.interrupt.pending = false;
+}
+
+#endif
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index f2f9046..ea05117 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -26,6 +26,7 @@
 #define DPRINTF(_f, _a ...) printf(_f , ## _a)
 #else
 #include <linux/kvm_host.h>
+#include "kvm_cache_regs.h"
 #define DPRINTF(x...) do {} while (0)
 #endif
 #include <linux/module.h>
@@ -46,25 +47,26 @@
 #define ImplicitOps (1<<1)	/* Implicit in opcode. No generic decode. */
 #define DstReg      (2<<1)	/* Register operand. */
 #define DstMem      (3<<1)	/* Memory operand. */
-#define DstMask     (3<<1)
+#define DstAcc      (4<<1)      /* Destination Accumulator */
+#define DstMask     (7<<1)
 /* Source operand type. */
-#define SrcNone     (0<<3)	/* No source operand. */
-#define SrcImplicit (0<<3)	/* Source operand is implicit in the opcode. */
-#define SrcReg      (1<<3)	/* Register operand. */
-#define SrcMem      (2<<3)	/* Memory operand. */
-#define SrcMem16    (3<<3)	/* Memory operand (16-bit). */
-#define SrcMem32    (4<<3)	/* Memory operand (32-bit). */
-#define SrcImm      (5<<3)	/* Immediate operand. */
-#define SrcImmByte  (6<<3)	/* 8-bit sign-extended immediate operand. */
-#define SrcMask     (7<<3)
+#define SrcNone     (0<<4)	/* No source operand. */
+#define SrcImplicit (0<<4)	/* Source operand is implicit in the opcode. */
+#define SrcReg      (1<<4)	/* Register operand. */
+#define SrcMem      (2<<4)	/* Memory operand. */
+#define SrcMem16    (3<<4)	/* Memory operand (16-bit). */
+#define SrcMem32    (4<<4)	/* Memory operand (32-bit). */
+#define SrcImm      (5<<4)	/* Immediate operand. */
+#define SrcImmByte  (6<<4)	/* 8-bit sign-extended immediate operand. */
+#define SrcMask     (7<<4)
 /* Generic ModRM decode. */
-#define ModRM       (1<<6)
+#define ModRM       (1<<7)
 /* Destination is only written; never read. */
-#define Mov         (1<<7)
-#define BitOp       (1<<8)
-#define MemAbs      (1<<9)      /* Memory operand is absolute displacement */
-#define String      (1<<10)     /* String instruction (rep capable) */
-#define Stack       (1<<11)     /* Stack instruction (push/pop) */
+#define Mov         (1<<8)
+#define BitOp       (1<<9)
+#define MemAbs      (1<<10)      /* Memory operand is absolute displacement */
+#define String      (1<<12)     /* String instruction (rep capable) */
+#define Stack       (1<<13)     /* Stack instruction (push/pop) */
 #define Group       (1<<14)     /* Bits 3:5 of modrm byte extend opcode */
 #define GroupDual   (1<<15)     /* Alternate decoding of mod == 3 */
 #define GroupMask   0xff        /* Group number stored in bits 0:7 */
@@ -94,7 +96,7 @@ static u16 opcode_table[256] = {
 	/* 0x20 - 0x27 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	SrcImmByte, SrcImm, 0, 0,
+	DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
 	/* 0x28 - 0x2F */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
@@ -106,7 +108,8 @@ static u16 opcode_table[256] = {
 	/* 0x38 - 0x3F */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	0, 0,
 	/* 0x40 - 0x47 */
 	DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
 	/* 0x48 - 0x4F */
@@ -153,9 +156,16 @@ static u16 opcode_table[256] = {
 	0, 0, ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
 	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
 	ByteOp | ImplicitOps | String, ImplicitOps | String,
-	/* 0xB0 - 0xBF */
-	0, 0, 0, 0, 0, 0, 0, 0,
-	DstReg | SrcImm | Mov, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xB0 - 0xB7 */
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	/* 0xB8 - 0xBF */
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
 	/* 0xC0 - 0xC7 */
 	ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
 	0, ImplicitOps | Stack, 0, 0,
@@ -169,17 +179,20 @@ static u16 opcode_table[256] = {
 	/* 0xD8 - 0xDF */
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xE0 - 0xE7 */
-	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0,
+	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
+	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	/* 0xE8 - 0xEF */
 	ImplicitOps | Stack, SrcImm | ImplicitOps,
 	ImplicitOps, SrcImmByte | ImplicitOps,
-	0, 0, 0, 0,
+	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
+	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	/* 0xF0 - 0xF7 */
 	0, 0, 0, 0,
 	ImplicitOps, ImplicitOps, Group | Group3_Byte, Group | Group3,
 	/* 0xF8 - 0xFF */
 	ImplicitOps, 0, ImplicitOps, ImplicitOps,
-	0, 0, Group | Group4, Group | Group5,
+	ImplicitOps, ImplicitOps, Group | Group4, Group | Group5,
 };
 
 static u16 twobyte_table[256] = {
@@ -268,15 +281,16 @@ static u16 group_table[] = {
 	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
 	0, 0, 0, 0,
 	[Group3*8] =
-	DstMem | SrcImm | ModRM | SrcImm, 0,
-	DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
+	DstMem | SrcImm | ModRM, 0,
+	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
 	0, 0, 0, 0,
 	[Group4*8] =
 	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
 	0, 0, 0, 0, 0, 0,
 	[Group5*8] =
-	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM, 0, 0,
-	SrcMem | ModRM, 0, SrcMem | ModRM | Stack, 0,
+	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
+	SrcMem | ModRM | Stack, 0,
+	SrcMem | ModRM | Stack, 0, SrcMem | ModRM | Stack, 0,
 	[Group7*8] =
 	0, 0, ModRM | SrcMem, ModRM | SrcMem,
 	SrcNone | ModRM | DstMem | Mov, 0,
@@ -839,7 +853,7 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 	/* Shadow copy of register state. Committed on successful emulation. */
 
 	memset(c, 0, sizeof(struct decode_cache));
-	c->eip = ctxt->vcpu->arch.rip;
+	c->eip = kvm_rip_read(ctxt->vcpu);
 	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
 	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
 
@@ -1048,6 +1062,23 @@ done_prefixes:
 		}
 		c->dst.type = OP_MEM;
 		break;
+	case DstAcc:
+		c->dst.type = OP_REG;
+		c->dst.bytes = c->op_bytes;
+		c->dst.ptr = &c->regs[VCPU_REGS_RAX];
+		switch (c->op_bytes) {
+			case 1:
+				c->dst.val = *(u8 *)c->dst.ptr;
+				break;
+			case 2:
+				c->dst.val = *(u16 *)c->dst.ptr;
+				break;
+			case 4:
+				c->dst.val = *(u32 *)c->dst.ptr;
+				break;
+		}
+		c->dst.orig_val = c->dst.val;
+		break;
 	}
 
 	if (c->rip_relative)
@@ -1151,6 +1182,14 @@ static inline int emulate_grp45(struct x86_emulate_ctxt *ctxt,
 	case 1:	/* dec */
 		emulate_1op("dec", c->dst, ctxt->eflags);
 		break;
+	case 2: /* call near abs */ {
+		long int old_eip;
+		old_eip = c->eip;
+		c->eip = c->src.val;
+		c->src.val = old_eip;
+		emulate_push(ctxt);
+		break;
+	}
 	case 4: /* jmp abs */
 		c->eip = c->src.val;
 		break;
@@ -1251,6 +1290,8 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 	u64 msr_data;
 	unsigned long saved_eip = 0;
 	struct decode_cache *c = &ctxt->decode;
+	unsigned int port;
+	int io_dir_in;
 	int rc = 0;
 
 	/* Shadow copy of register state. Committed on successful emulation.
@@ -1267,7 +1308,7 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 	if (c->rep_prefix && (c->d & String)) {
 		/* All REP prefixes have the same first termination condition */
 		if (c->regs[VCPU_REGS_RCX] == 0) {
-			ctxt->vcpu->arch.rip = c->eip;
+			kvm_rip_write(ctxt->vcpu, c->eip);
 			goto done;
 		}
 		/* The second termination condition only applies for REPE
@@ -1281,17 +1322,17 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 				(c->b == 0xae) || (c->b == 0xaf)) {
 			if ((c->rep_prefix == REPE_PREFIX) &&
 				((ctxt->eflags & EFLG_ZF) == 0)) {
-					ctxt->vcpu->arch.rip = c->eip;
+					kvm_rip_write(ctxt->vcpu, c->eip);
 					goto done;
 			}
 			if ((c->rep_prefix == REPNE_PREFIX) &&
 				((ctxt->eflags & EFLG_ZF) == EFLG_ZF)) {
-				ctxt->vcpu->arch.rip = c->eip;
+				kvm_rip_write(ctxt->vcpu, c->eip);
 				goto done;
 			}
 		}
 		c->regs[VCPU_REGS_RCX]--;
-		c->eip = ctxt->vcpu->arch.rip;
+		c->eip = kvm_rip_read(ctxt->vcpu);
 	}
 
 	if (c->src.type == OP_MEM) {
@@ -1351,27 +1392,10 @@ special_insn:
 	      sbb:		/* sbb */
 		emulate_2op_SrcV("sbb", c->src, c->dst, ctxt->eflags);
 		break;
-	case 0x20 ... 0x23:
+	case 0x20 ... 0x25:
 	      and:		/* and */
 		emulate_2op_SrcV("and", c->src, c->dst, ctxt->eflags);
 		break;
-	case 0x24:              /* and al imm8 */
-		c->dst.type = OP_REG;
-		c->dst.ptr = &c->regs[VCPU_REGS_RAX];
-		c->dst.val = *(u8 *)c->dst.ptr;
-		c->dst.bytes = 1;
-		c->dst.orig_val = c->dst.val;
-		goto and;
-	case 0x25:              /* and ax imm16, or eax imm32 */
-		c->dst.type = OP_REG;
-		c->dst.bytes = c->op_bytes;
-		c->dst.ptr = &c->regs[VCPU_REGS_RAX];
-		if (c->op_bytes == 2)
-			c->dst.val = *(u16 *)c->dst.ptr;
-		else
-			c->dst.val = *(u32 *)c->dst.ptr;
-		c->dst.orig_val = c->dst.val;
-		goto and;
 	case 0x28 ... 0x2d:
 	      sub:		/* sub */
 		emulate_2op_SrcV("sub", c->src, c->dst, ctxt->eflags);
@@ -1659,7 +1683,7 @@ special_insn:
 	case 0xae ... 0xaf:	/* scas */
 		DPRINTF("Urk! I don't handle SCAS.\n");
 		goto cannot_emulate;
-	case 0xb8: /* mov r, imm */
+	case 0xb0 ... 0xbf: /* mov r, imm */
 		goto mov;
 	case 0xc0 ... 0xc1:
 		emulate_grp2(ctxt);
@@ -1679,6 +1703,16 @@ special_insn:
 		c->src.val = c->regs[VCPU_REGS_RCX];
 		emulate_grp2(ctxt);
 		break;
+	case 0xe4: 	/* inb */
+	case 0xe5: 	/* in */
+		port = insn_fetch(u8, 1, c->eip);
+		io_dir_in = 1;
+		goto do_io;
+	case 0xe6: /* outb */
+	case 0xe7: /* out */
+		port = insn_fetch(u8, 1, c->eip);
+		io_dir_in = 0;
+		goto do_io;
 	case 0xe8: /* call (near) */ {
 		long int rel;
 		switch (c->op_bytes) {
@@ -1729,6 +1763,22 @@ special_insn:
 		jmp_rel(c, c->src.val);
 		c->dst.type = OP_NONE; /* Disable writeback. */
 		break;
+	case 0xec: /* in al,dx */
+	case 0xed: /* in (e/r)ax,dx */
+		port = c->regs[VCPU_REGS_RDX];
+		io_dir_in = 1;
+		goto do_io;
+	case 0xee: /* out al,dx */
+	case 0xef: /* out (e/r)ax,dx */
+		port = c->regs[VCPU_REGS_RDX];
+		io_dir_in = 0;
+	do_io:	if (kvm_emulate_pio(ctxt->vcpu, NULL, io_dir_in,
+				   (c->d & ByteOp) ? 1 : c->op_bytes,
+				   port) != 0) {
+			c->eip = saved_eip;
+			goto cannot_emulate;
+		}
+		return 0;
 	case 0xf4:              /* hlt */
 		ctxt->vcpu->arch.halt_request = 1;
 		break;
@@ -1754,6 +1804,14 @@ special_insn:
 		ctxt->eflags |= X86_EFLAGS_IF;
 		c->dst.type = OP_NONE;	/* Disable writeback. */
 		break;
+	case 0xfc: /* cld */
+		ctxt->eflags &= ~EFLG_DF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfd: /* std */
+		ctxt->eflags |= EFLG_DF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
 	case 0xfe ... 0xff:	/* Grp4/Grp5 */
 		rc = emulate_grp45(ctxt, ops);
 		if (rc != 0)
@@ -1768,7 +1826,7 @@ writeback:
 
 	/* Commit shadow register state. */
 	memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
-	ctxt->vcpu->arch.rip = c->eip;
+	kvm_rip_write(ctxt->vcpu, c->eip);
 
 done:
 	if (rc == X86EMUL_UNHANDLEABLE) {
@@ -1793,7 +1851,7 @@ twobyte_insn:
 				goto done;
 
 			/* Let the processor re-execute the fixed hypercall */
-			c->eip = ctxt->vcpu->arch.rip;
+			c->eip = kvm_rip_read(ctxt->vcpu);
 			/* Disable writeback. */
 			c->dst.type = OP_NONE;
 			break;
@@ -1889,7 +1947,7 @@ twobyte_insn:
 		rc = kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data);
 		if (rc) {
 			kvm_inject_gp(ctxt->vcpu, 0);
-			c->eip = ctxt->vcpu->arch.rip;
+			c->eip = kvm_rip_read(ctxt->vcpu);
 		}
 		rc = X86EMUL_CONTINUE;
 		c->dst.type = OP_NONE;
@@ -1899,7 +1957,7 @@ twobyte_insn:
 		rc = kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data);
 		if (rc) {
 			kvm_inject_gp(ctxt->vcpu, 0);
-			c->eip = ctxt->vcpu->arch.rip;
+			c->eip = kvm_rip_read(ctxt->vcpu);
 		} else {
 			c->regs[VCPU_REGS_RAX] = (u32)msr_data;
 			c->regs[VCPU_REGS_RDX] = msr_data >> 32;
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index d9249a8..48ee4f9 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -55,6 +55,7 @@
 #include <linux/lguest_launcher.h>
 #include <linux/virtio_console.h>
 #include <linux/pm.h>
+#include <asm/apic.h>
 #include <asm/lguest.h>
 #include <asm/paravirt.h>
 #include <asm/param.h>
@@ -581,7 +582,7 @@ static void __init lguest_init_IRQ(void)
 	for (i = 0; i < LGUEST_IRQS; i++) {
 		int vector = FIRST_EXTERNAL_VECTOR + i;
 		if (vector != SYSCALL_VECTOR) {
-			set_intr_gate(vector, interrupt[i]);
+			set_intr_gate(vector, interrupt[vector]);
 			set_irq_chip_and_handler_name(i, &lguest_irq_controller,
 						      handle_level_irq,
 						      "level");
@@ -783,14 +784,44 @@ static void lguest_wbinvd(void)
  * code qualifies for Advanced.  It will also never interrupt anything.  It
  * does, however, allow us to get through the Linux boot code. */
 #ifdef CONFIG_X86_LOCAL_APIC
-static void lguest_apic_write(unsigned long reg, u32 v)
+static void lguest_apic_write(u32 reg, u32 v)
 {
 }
 
-static u32 lguest_apic_read(unsigned long reg)
+static u32 lguest_apic_read(u32 reg)
 {
 	return 0;
 }
+
+static u64 lguest_apic_icr_read(void)
+{
+	return 0;
+}
+
+static void lguest_apic_icr_write(u32 low, u32 id)
+{
+	/* Warn to see if there's any stray references */
+	WARN_ON(1);
+}
+
+static void lguest_apic_wait_icr_idle(void)
+{
+	return;
+}
+
+static u32 lguest_apic_safe_wait_icr_idle(void)
+{
+	return 0;
+}
+
+static struct apic_ops lguest_basic_apic_ops = {
+	.read = lguest_apic_read,
+	.write = lguest_apic_write,
+	.icr_read = lguest_apic_icr_read,
+	.icr_write = lguest_apic_icr_write,
+	.wait_icr_idle = lguest_apic_wait_icr_idle,
+	.safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle,
+};
 #endif
 
 /* STOP!  Until an interrupt comes in. */
@@ -990,8 +1021,7 @@ __init void lguest_init(void)
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	/* apic read/write intercepts */
-	pv_apic_ops.apic_write = lguest_apic_write;
-	pv_apic_ops.apic_read = lguest_apic_read;
+	apic_ops = &lguest_basic_apic_ops;
 #endif
 
 	/* time operations */
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index aa3fa41..55e11aa 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -17,9 +17,6 @@ ifeq ($(CONFIG_X86_32),y)
         lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
 else
         obj-y += io_64.o iomap_copy_64.o
-
-        CFLAGS_csum-partial_64.o := -funroll-loops
-
         lib-y += csum-partial_64.o csum-copy_64.o csum-wrappers_64.o
         lib-y += thunk_64.o clear_page_64.o copy_page_64.o
         lib-y += memmove_64.o memset_64.o
diff --git a/arch/x86/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c
index 01b868b..321cf72 100644
--- a/arch/x86/lib/msr-on-cpu.c
+++ b/arch/x86/lib/msr-on-cpu.c
@@ -16,37 +16,46 @@ static void __rdmsr_on_cpu(void *info)
 	rdmsr(rv->msr_no, rv->l, rv->h);
 }
 
-static void __rdmsr_safe_on_cpu(void *info)
+static void __wrmsr_on_cpu(void *info)
 {
 	struct msr_info *rv = info;
 
-	rv->err = rdmsr_safe(rv->msr_no, &rv->l, &rv->h);
+	wrmsr(rv->msr_no, rv->l, rv->h);
 }
 
-static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe)
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
-	int err = 0;
+	int err;
 	struct msr_info rv;
 
 	rv.msr_no = msr_no;
-	if (safe) {
-		err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu,
-					       &rv, 1);
-		err = err ? err : rv.err;
-	} else {
-		err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
-	}
+	err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
 	*l = rv.l;
 	*h = rv.h;
 
 	return err;
 }
 
-static void __wrmsr_on_cpu(void *info)
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	int err;
+	struct msr_info rv;
+
+	rv.msr_no = msr_no;
+	rv.l = l;
+	rv.h = h;
+	err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
+
+	return err;
+}
+
+/* These "safe" variants are slower and should be used when the target MSR
+   may not actually exist. */
+static void __rdmsr_safe_on_cpu(void *info)
 {
 	struct msr_info *rv = info;
 
-	wrmsr(rv->msr_no, rv->l, rv->h);
+	rv->err = rdmsr_safe(rv->msr_no, &rv->l, &rv->h);
 }
 
 static void __wrmsr_safe_on_cpu(void *info)
@@ -56,45 +65,30 @@ static void __wrmsr_safe_on_cpu(void *info)
 	rv->err = wrmsr_safe(rv->msr_no, rv->l, rv->h);
 }
 
-static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe)
+int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
-	int err = 0;
+	int err;
 	struct msr_info rv;
 
 	rv.msr_no = msr_no;
-	rv.l = l;
-	rv.h = h;
-	if (safe) {
-		err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu,
-					       &rv, 1);
-		err = err ? err : rv.err;
-	} else {
-		err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
-	}
-
-	return err;
-}
+	err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
+	*l = rv.l;
+	*h = rv.h;
 
-int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
-{
-	return _wrmsr_on_cpu(cpu, msr_no, l, h, 0);
+	return err ? err : rv.err;
 }
 
-int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
-{
-	return _rdmsr_on_cpu(cpu, msr_no, l, h, 0);
-}
-
-/* These "safe" variants are slower and should be used when the target MSR
-   may not actually exist. */
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
-	return _wrmsr_on_cpu(cpu, msr_no, l, h, 1);
-}
+	int err;
+	struct msr_info rv;
 
-int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
-{
-	return _rdmsr_on_cpu(cpu, msr_no, l, h, 1);
+	rv.msr_no = msr_no;
+	rv.l = l;
+	rv.h = h;
+	err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
+
+	return err ? err : rv.err;
 }
 
 EXPORT_SYMBOL(rdmsr_on_cpu);
diff --git a/arch/x86/lib/string_32.c b/arch/x86/lib/string_32.c
index 94972e7..82004d2 100644
--- a/arch/x86/lib/string_32.c
+++ b/arch/x86/lib/string_32.c
@@ -22,7 +22,7 @@ char *strcpy(char *dest, const char *src)
 		"testb %%al,%%al\n\t"
 		"jne 1b"
 		: "=&S" (d0), "=&D" (d1), "=&a" (d2)
-		:"0" (src), "1" (dest) : "memory");
+		: "0" (src), "1" (dest) : "memory");
 	return dest;
 }
 EXPORT_SYMBOL(strcpy);
@@ -42,7 +42,7 @@ char *strncpy(char *dest, const char *src, size_t count)
 		"stosb\n"
 		"2:"
 		: "=&S" (d0), "=&D" (d1), "=&c" (d2), "=&a" (d3)
-		:"0" (src), "1" (dest), "2" (count) : "memory");
+		: "0" (src), "1" (dest), "2" (count) : "memory");
 	return dest;
 }
 EXPORT_SYMBOL(strncpy);
@@ -60,7 +60,7 @@ char *strcat(char *dest, const char *src)
 		"testb %%al,%%al\n\t"
 		"jne 1b"
 		: "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3)
-		: "0" (src), "1" (dest), "2" (0), "3" (0xffffffffu): "memory");
+		: "0" (src), "1" (dest), "2" (0), "3" (0xffffffffu) : "memory");
 	return dest;
 }
 EXPORT_SYMBOL(strcat);
@@ -105,9 +105,9 @@ int strcmp(const char *cs, const char *ct)
 		"2:\tsbbl %%eax,%%eax\n\t"
 		"orb $1,%%al\n"
 		"3:"
-		:"=a" (res), "=&S" (d0), "=&D" (d1)
-		:"1" (cs), "2" (ct)
-		:"memory");
+		: "=a" (res), "=&S" (d0), "=&D" (d1)
+		: "1" (cs), "2" (ct)
+		: "memory");
 	return res;
 }
 EXPORT_SYMBOL(strcmp);
@@ -130,9 +130,9 @@ int strncmp(const char *cs, const char *ct, size_t count)
 		"3:\tsbbl %%eax,%%eax\n\t"
 		"orb $1,%%al\n"
 		"4:"
-		:"=a" (res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
-		:"1" (cs), "2" (ct), "3" (count)
-		:"memory");
+		: "=a" (res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
+		: "1" (cs), "2" (ct), "3" (count)
+		: "memory");
 	return res;
 }
 EXPORT_SYMBOL(strncmp);
@@ -152,9 +152,9 @@ char *strchr(const char *s, int c)
 		"movl $1,%1\n"
 		"2:\tmovl %1,%0\n\t"
 		"decl %0"
-		:"=a" (res), "=&S" (d0)
-		:"1" (s), "0" (c)
-		:"memory");
+		: "=a" (res), "=&S" (d0)
+		: "1" (s), "0" (c)
+		: "memory");
 	return res;
 }
 EXPORT_SYMBOL(strchr);
@@ -169,9 +169,9 @@ size_t strlen(const char *s)
 		"scasb\n\t"
 		"notl %0\n\t"
 		"decl %0"
-		:"=c" (res), "=&D" (d0)
-		:"1" (s), "a" (0), "0" (0xffffffffu)
-		:"memory");
+		: "=c" (res), "=&D" (d0)
+		: "1" (s), "a" (0), "0" (0xffffffffu)
+		: "memory");
 	return res;
 }
 EXPORT_SYMBOL(strlen);
@@ -189,9 +189,9 @@ void *memchr(const void *cs, int c, size_t count)
 		"je 1f\n\t"
 		"movl $1,%0\n"
 		"1:\tdecl %0"
-		:"=D" (res), "=&c" (d0)
-		:"a" (c), "0" (cs), "1" (count)
-		:"memory");
+		: "=D" (res), "=&c" (d0)
+		: "a" (c), "0" (cs), "1" (count)
+		: "memory");
 	return res;
 }
 EXPORT_SYMBOL(memchr);
@@ -228,9 +228,9 @@ size_t strnlen(const char *s, size_t count)
 		"cmpl $-1,%1\n\t"
 		"jne 1b\n"
 		"3:\tsubl %2,%0"
-		:"=a" (res), "=&d" (d0)
-		:"c" (s), "1" (count)
-		:"memory");
+		: "=a" (res), "=&d" (d0)
+		: "c" (s), "1" (count)
+		: "memory");
 	return res;
 }
 EXPORT_SYMBOL(strnlen);
diff --git a/arch/x86/lib/strstr_32.c b/arch/x86/lib/strstr_32.c
index 42e8a50..8e2d55f 100644
--- a/arch/x86/lib/strstr_32.c
+++ b/arch/x86/lib/strstr_32.c
@@ -23,9 +23,9 @@ __asm__ __volatile__(
 	"jne 1b\n\t"
 	"xorl %%eax,%%eax\n\t"
 	"2:"
-	:"=a" (__res), "=&c" (d0), "=&S" (d1)
-	:"0" (0), "1" (0xffffffff), "2" (cs), "g" (ct)
-	:"dx", "di");
+	: "=a" (__res), "=&c" (d0), "=&S" (d1)
+	: "0" (0), "1" (0xffffffff), "2" (cs), "g" (ct)
+	: "dx", "di");
 return __res;
 }
 
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index fab5fab..4a20b2f 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -14,6 +14,13 @@
 #include <asm/uaccess.h>
 #include <asm/mmx.h>
 
+#ifdef CONFIG_X86_INTEL_USERCOPY
+/*
+ * Alignment at which movsl is preferred for bulk memory copies.
+ */
+struct movsl_mask movsl_mask __read_mostly;
+#endif
+
 static inline int __movsl_is_ok(unsigned long a1, unsigned long a2, unsigned long n)
 {
 #ifdef CONFIG_X86_INTEL_USERCOPY
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index 3d31783..37b9ae4 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -10,13 +10,15 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
+#include <mach_ipi.h>
+
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI	(1)
 #else
 #define DEFAULT_SEND_IPI	(0)
 #endif
 
-int no_broadcast=DEFAULT_SEND_IPI;
+int no_broadcast = DEFAULT_SEND_IPI;
 
 /**
  * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
@@ -36,15 +38,6 @@ void __init pre_intr_init_hook(void)
 	init_ISA_irqs();
 }
 
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "cascade",
-};
-
 /**
  * intr_init_hook - post gate setup interrupt initialisation
  *
@@ -60,12 +53,6 @@ void __init intr_init_hook(void)
 		if (x86_quirks->arch_intr_init())
 			return;
 	}
-#ifdef CONFIG_X86_LOCAL_APIC
-	apic_intr_init();
-#endif
-
-	if (!acpi_ioapic)
-		setup_irq(2, &irq2);
 }
 
 /**
diff --git a/arch/x86/mach-es7000/Makefile b/arch/x86/mach-es7000/Makefile
deleted file mode 100644
index 3ef8b43..0000000
--- a/arch/x86/mach-es7000/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_X86_ES7000)	:= es7000plat.o
diff --git a/arch/x86/mach-es7000/es7000.h b/arch/x86/mach-es7000/es7000.h
deleted file mode 100644
index c8d5aa1..0000000
--- a/arch/x86/mach-es7000/es7000.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- *             Natalie Protasevich, Unisys Corporation
- * This file contains the code to configure and interface 
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting 
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-
-/*
- * ES7000 chipsets
- */
-
-#define NON_UNISYS		0
-#define ES7000_CLASSIC		1
-#define ES7000_ZORRO		2
-
-
-#define	MIP_REG			1
-#define	MIP_PSAI_REG		4
-
-#define	MIP_BUSY		1
-#define	MIP_SPIN		0xf0000
-#define	MIP_VALID		0x0100000000000000ULL
-#define	MIP_PORT(VALUE)	((VALUE >> 32) & 0xffff)
-
-#define	MIP_RD_LO(VALUE)	(VALUE & 0xffffffff)   
-
-struct mip_reg_info {
-	unsigned long long mip_info;
-	unsigned long long delivery_info;
-	unsigned long long host_reg;
-	unsigned long long mip_reg;
-};
-
-struct part_info {
-	unsigned char type;   
-	unsigned char length;
-	unsigned char part_id;
-	unsigned char apic_mode;
-	unsigned long snum;    
-	char ptype[16];
-	char sname[64];
-	char pname[64];
-};
-
-struct psai {
-	unsigned long long entry_type;
-	unsigned long long addr;
-	unsigned long long bep_addr;
-};
-
-struct es7000_mem_info {
-	unsigned char type;   
-	unsigned char length;
-	unsigned char resv[6];
-	unsigned long long  start; 
-	unsigned long long  size; 
-};
-
-struct es7000_oem_table {
-	unsigned long long hdr;
-	struct mip_reg_info mip;
-	struct part_info pif;
-	struct es7000_mem_info shm;
-	struct psai psai;
-};
-
-#ifdef CONFIG_ACPI
-
-struct oem_table {
-	struct acpi_table_header Header;
-	u32 OEMTableAddr;
-	u32 OEMTableSize;
-};
-
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-#endif
-
-struct mip_reg {
-	unsigned long long off_0;
-	unsigned long long off_8;
-	unsigned long long off_10;
-	unsigned long long off_18;
-	unsigned long long off_20;
-	unsigned long long off_28;
-	unsigned long long off_30;
-	unsigned long long off_38;
-};
-
-#define	MIP_SW_APIC		0x1020b
-#define	MIP_FUNC(VALUE) 	(VALUE & 0xff)
-
-extern int parse_unisys_oem (char *oemptr);
-extern void setup_unisys(void);
-extern int es7000_start_cpu(int cpu, unsigned long eip);
-extern void es7000_sw_apic(void);
diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c
deleted file mode 100644
index 50189af..0000000
--- a/arch/x86/mach-es7000/es7000plat.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- *             Natalie Protasevich, Unisys Corporation
- * This file contains the code to configure and interface
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <asm/io.h>
-#include <asm/nmi.h>
-#include <asm/smp.h>
-#include <asm/apicdef.h>
-#include "es7000.h"
-#include <mach_mpparse.h>
-
-/*
- * ES7000 Globals
- */
-
-static volatile unsigned long	*psai = NULL;
-static struct mip_reg		*mip_reg;
-static struct mip_reg		*host_reg;
-static int 			mip_port;
-static unsigned long		mip_addr, host_addr;
-
-int es7000_plat;
-
-/*
- * GSI override for ES7000 platforms.
- */
-
-static unsigned int base;
-
-static int
-es7000_rename_gsi(int ioapic, int gsi)
-{
-	if (es7000_plat == ES7000_ZORRO)
-		return gsi;
-
-	if (!base) {
-		int i;
-		for (i = 0; i < nr_ioapics; i++)
-			base += nr_ioapic_registers[i];
-	}
-
-	if (!ioapic && (gsi < 16)) 
-		gsi += base;
-	return gsi;
-}
-
-void __init
-setup_unisys(void)
-{
-	/*
-	 * Determine the generation of the ES7000 currently running.
-	 *
-	 * es7000_plat = 1 if the machine is a 5xx ES7000 box
-	 * es7000_plat = 2 if the machine is a x86_64 ES7000 box
-	 *
-	 */
-	if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
-		es7000_plat = ES7000_ZORRO;
-	else
-		es7000_plat = ES7000_CLASSIC;
-	ioapic_renumber_irq = es7000_rename_gsi;
-}
-
-/*
- * Parse the OEM Table
- */
-
-int __init
-parse_unisys_oem (char *oemptr)
-{
-	int                     i;
-	int 			success = 0;
-	unsigned char           type, size;
-	unsigned long           val;
-	char                    *tp = NULL;
-	struct psai             *psaip = NULL;
-	struct mip_reg_info 	*mi;
-	struct mip_reg		*host, *mip;
-
-	tp = oemptr;
-
-	tp += 8;
-
-	for (i=0; i <= 6; i++) {
-		type = *tp++;
-		size = *tp++;
-		tp -= 2;
-		switch (type) {
-		case MIP_REG:
-			mi = (struct mip_reg_info *)tp;
-			val = MIP_RD_LO(mi->host_reg);
-			host_addr = val;
-			host = (struct mip_reg *)val;
-			host_reg = __va(host);
-			val = MIP_RD_LO(mi->mip_reg);
-			mip_port = MIP_PORT(mi->mip_info);
-			mip_addr = val;
-			mip = (struct mip_reg *)val;
-			mip_reg = __va(mip);
-			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
-				 (unsigned long)host_reg);
-			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
-				 (unsigned long)mip_reg);
-			success++;
-			break;
-		case MIP_PSAI_REG:
-			psaip = (struct psai *)tp;
-			if (tp != NULL) {
-				if (psaip->addr)
-					psai = __va(psaip->addr);
-				else
-					psai = NULL;
-				success++;
-			}
-			break;
-		default:
-			break;
-		}
-		tp += size;
-	}
-
-	if (success < 2) {
-		es7000_plat = NON_UNISYS;
-	} else
-		setup_unisys();
-	return es7000_plat;
-}
-
-#ifdef CONFIG_ACPI
-int __init
-find_unisys_acpi_oem_table(unsigned long *oem_addr)
-{
-	struct acpi_table_header *header = NULL;
-	int i = 0;
-	while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
-		if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
-			struct oem_table *t = (struct oem_table *)header;
-			*oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr,
-								    t->OEMTableSize);
-			return 0;
-		}
-	}
-	return -1;
-}
-#endif
-
-static void
-es7000_spin(int n)
-{
-	int i = 0;
-
-	while (i++ < n)
-		rep_nop();
-}
-
-static int __init
-es7000_mip_write(struct mip_reg *mip_reg)
-{
-	int			status = 0;
-	int			spin;
-
-	spin = MIP_SPIN;
-	while (((unsigned long long)host_reg->off_38 &
-		(unsigned long long)MIP_VALID) != 0) {
-			if (--spin <= 0) {
-				printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
-				return -1;
-			}
-		es7000_spin(MIP_SPIN);
-	}
-
-	memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
-	outb(1, mip_port);
-
-	spin = MIP_SPIN;
-
-	while (((unsigned long long)mip_reg->off_38 &
-		(unsigned long long)MIP_VALID) == 0) {
-		if (--spin <= 0) {
-			printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
-			return -1;
-		}
-		es7000_spin(MIP_SPIN);
-	}
-
-	status = ((unsigned long long)mip_reg->off_0 &
-		(unsigned long long)0xffff0000000000ULL) >> 48;
-	mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 &
-		(unsigned long long)~MIP_VALID);
-	return status;
-}
-
-int
-es7000_start_cpu(int cpu, unsigned long eip)
-{
-	unsigned long vect = 0, psaival = 0;
-
-	if (psai == NULL)
-		return -1;
-
-	vect = ((unsigned long)__pa(eip)/0x1000) << 16;
-	psaival = (0x1000000 | vect | cpu);
-
-	while (*psai & 0x1000000)
-                ;
-
-	*psai = psaival;
-
-	return 0;
-
-}
-
-void __init
-es7000_sw_apic(void)
-{
-	if (es7000_plat) {
-		int mip_status;
-		struct mip_reg es7000_mip_reg;
-
-		printk("ES7000: Enabling APIC mode.\n");
-        	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
-        	es7000_mip_reg.off_0 = MIP_SW_APIC;
-        	es7000_mip_reg.off_38 = (MIP_VALID);
-        	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
-              		printk("es7000_sw_apic: command failed, status = %x\n",
-				mip_status);
-		return;
-	}
-}
diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile
index 0dbd780..6730f4e 100644
--- a/arch/x86/mach-generic/Makefile
+++ b/arch/x86/mach-generic/Makefile
@@ -9,4 +9,3 @@ obj-$(CONFIG_X86_NUMAQ)		+= numaq.o
 obj-$(CONFIG_X86_SUMMIT)	+= summit.o
 obj-$(CONFIG_X86_BIGSMP)	+= bigsmp.o
 obj-$(CONFIG_X86_ES7000)	+= es7000.o
-obj-$(CONFIG_X86_ES7000)	+= ../../x86/mach-es7000/
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 59d7717..3c3b471 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -5,18 +5,17 @@
 #define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
-#include <asm/smp.h>
 #include <asm/mpspec.h>
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <linux/kernel.h>
-#include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
-#include <asm/mach-bigsmp/mach_apic.h>
-#include <asm/mach-bigsmp/mach_apicdef.h>
-#include <asm/mach-bigsmp/mach_ipi.h>
+#include <asm/bigsmp/apicdef.h>
+#include <linux/smp.h>
+#include <asm/bigsmp/apic.h>
+#include <asm/bigsmp/ipi.h>
 #include <asm/mach-default/mach_mpparse.h>
 
 static int dmi_bigsmp; /* can be set by dmi scanners */
@@ -42,6 +41,10 @@ static const struct dmi_system_id bigsmp_dmi_table[] = {
 	 { }
 };
 
+static cpumask_t vector_allocation_domain(int cpu)
+{
+        return cpumask_of_cpu(cpu);
+}
 
 static int probe_bigsmp(void)
 {
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 4742626..28459ca 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -4,20 +4,19 @@
 #define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
-#include <asm/smp.h>
 #include <asm/mpspec.h>
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/smp.h>
 #include <linux/init.h>
-#include <asm/mach-es7000/mach_apicdef.h>
-#include <asm/mach-es7000/mach_apic.h>
-#include <asm/mach-es7000/mach_ipi.h>
-#include <asm/mach-es7000/mach_mpparse.h>
-#include <asm/mach-es7000/mach_wakecpu.h>
+#include <asm/es7000/apicdef.h>
+#include <linux/smp.h>
+#include <asm/es7000/apic.h>
+#include <asm/es7000/ipi.h>
+#include <asm/es7000/mpparse.h>
+#include <asm/es7000/wakecpu.h>
 
 static int probe_es7000(void)
 {
@@ -48,16 +47,26 @@ static __init int mps_oem_check(struct mp_config_table *mpc, char *oem,
 /* Hook from generic ACPI tables.c */
 static int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	unsigned long oem_addr;
+	unsigned long oem_addr = 0;
+	int check_dsdt;
+	int ret = 0;
+
+	/* check dsdt at first to avoid clear fix_map for oem_addr */
+	check_dsdt = es7000_check_dsdt();
+
 	if (!find_unisys_acpi_oem_table(&oem_addr)) {
-		if (es7000_check_dsdt())
-			return parse_unisys_oem((char *)oem_addr);
+		if (check_dsdt)
+			ret = parse_unisys_oem((char *)oem_addr);
 		else {
 			setup_unisys();
-			return 1;
+			ret = 1;
 		}
+		/*
+		 * we need to unmap it
+		 */
+		unmap_unisys_acpi_oem_table(oem_addr);
 	}
-	return 0;
+	return ret;
 }
 #else
 static int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
@@ -66,4 +75,18 @@ static int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 }
 #endif
 
+static cpumask_t vector_allocation_domain(int cpu)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	cpumask_t domain = { { [0] = APIC_ALL_CPUS, } };
+	return domain;
+}
+
 struct genapic __initdata_refok apic_es7000 = APIC_INIT("es7000", probe_es7000);
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 8091e68..71a309b 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -4,7 +4,6 @@
 #define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
-#include <linux/smp.h>
 #include <asm/mpspec.h>
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
@@ -12,11 +11,12 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <asm/mach-numaq/mach_apic.h>
-#include <asm/mach-numaq/mach_apicdef.h>
-#include <asm/mach-numaq/mach_ipi.h>
-#include <asm/mach-numaq/mach_mpparse.h>
-#include <asm/mach-numaq/mach_wakecpu.h>
+#include <asm/numaq/apicdef.h>
+#include <linux/smp.h>
+#include <asm/numaq/apic.h>
+#include <asm/numaq/ipi.h>
+#include <asm/numaq/mpparse.h>
+#include <asm/numaq/wakecpu.h>
 #include <asm/numaq.h>
 
 static int mps_oem_check(struct mp_config_table *mpc, char *oem,
@@ -38,4 +38,18 @@ static int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	return 0;
 }
 
+static cpumask_t vector_allocation_domain(int cpu)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	cpumask_t domain = { { [0] = APIC_ALL_CPUS, } };
+	return domain;
+}
+
 struct genapic apic_numaq = APIC_INIT("NUMAQ", probe_numaq);
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index a97ea0f..6272b5e 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -4,19 +4,18 @@
 #define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
-#include <asm/smp.h>
 #include <asm/mpspec.h>
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/smp.h>
 #include <linux/init.h>
-#include <asm/mach-summit/mach_apic.h>
-#include <asm/mach-summit/mach_apicdef.h>
-#include <asm/mach-summit/mach_ipi.h>
-#include <asm/mach-summit/mach_mpparse.h>
+#include <asm/summit/apicdef.h>
+#include <linux/smp.h>
+#include <asm/summit/apic.h>
+#include <asm/summit/ipi.h>
+#include <asm/summit/mpparse.h>
 
 static int probe_summit(void)
 {
@@ -24,4 +23,18 @@ static int probe_summit(void)
 	return 0;
 }
 
+static cpumask_t vector_allocation_domain(int cpu)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	cpumask_t domain = { { [0] = APIC_ALL_CPUS, } };
+	return domain;
+}
+
 struct genapic apic_summit = APIC_INIT("summit", probe_summit);
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index ee0fba0..0f6e8a6 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -448,6 +448,8 @@ static void __init start_secondary(void *unused)
 
 	VDEBUG(("VOYAGER SMP: CPU%d, stack at about %p\n", cpuid, &cpuid));
 
+	notify_cpu_starting(cpuid);
+
 	/* enable interrupts */
 	local_irq_enable();
 
@@ -1481,7 +1483,7 @@ static void disable_local_vic_irq(unsigned int irq)
  * the interrupt off to another CPU */
 static void before_handle_vic_irq(unsigned int irq)
 {
-	irq_desc_t *desc = irq_desc + irq;
+	irq_desc_t *desc = irq_to_desc(irq);
 	__u8 cpu = smp_processor_id();
 
 	_raw_spin_lock(&vic_irq_lock);
@@ -1516,7 +1518,7 @@ static void before_handle_vic_irq(unsigned int irq)
 /* Finish the VIC interrupt: basically mask */
 static void after_handle_vic_irq(unsigned int irq)
 {
-	irq_desc_t *desc = irq_desc + irq;
+	irq_desc_t *desc = irq_to_desc(irq);
 
 	_raw_spin_lock(&vic_irq_lock);
 	{
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index dfb932d..59f89b4 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -13,12 +13,8 @@ obj-$(CONFIG_MMIOTRACE)		+= mmiotrace.o
 mmiotrace-y			:= pf_in.o mmio-mod.o
 obj-$(CONFIG_MMIOTRACE_TEST)	+= testmmiotrace.o
 
-ifeq ($(CONFIG_X86_32),y)
-obj-$(CONFIG_NUMA)		+= discontig_32.o
-else
-obj-$(CONFIG_NUMA)		+= numa_64.o
+obj-$(CONFIG_NUMA)		+= numa_$(BITS).o
 obj-$(CONFIG_K8_NUMA)		+= k8topology_64.o
-endif
 obj-$(CONFIG_ACPI_NUMA)		+= srat_$(BITS).o
 
 obj-$(CONFIG_MEMTEST)		+= memtest.o
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
deleted file mode 100644
index 62fa440..0000000
--- a/arch/x86/mm/discontig_32.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * Written by: Patricia Gaughen <gone@us.ibm.com>, IBM Corporation
- * August 2002: added remote node KVA remap - Martin J. Bligh 
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.          
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/mmzone.h>
-#include <linux/highmem.h>
-#include <linux/initrd.h>
-#include <linux/nodemask.h>
-#include <linux/module.h>
-#include <linux/kexec.h>
-#include <linux/pfn.h>
-#include <linux/swap.h>
-#include <linux/acpi.h>
-
-#include <asm/e820.h>
-#include <asm/setup.h>
-#include <asm/mmzone.h>
-#include <asm/bios_ebda.h>
-#include <asm/proto.h>
-
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_data);
-
-/*
- * numa interface - we expect the numa architecture specific code to have
- *                  populated the following initialisation.
- *
- * 1) node_online_map  - the map of all nodes configured (online) in the system
- * 2) node_start_pfn   - the starting page frame number for a node
- * 3) node_end_pfn     - the ending page fram number for a node
- */
-unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly;
-unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
-
-
-#ifdef CONFIG_DISCONTIGMEM
-/*
- * 4) physnode_map     - the mapping between a pfn and owning node
- * physnode_map keeps track of the physical memory layout of a generic
- * numa node on a 64Mb break (each element of the array will
- * represent 64Mb of memory and will be marked by the node id.  so,
- * if the first gig is on node 0, and the second gig is on node 1
- * physnode_map will contain:
- *
- *     physnode_map[0-15] = 0;
- *     physnode_map[16-31] = 1;
- *     physnode_map[32- ] = -1;
- */
-s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1};
-EXPORT_SYMBOL(physnode_map);
-
-void memory_present(int nid, unsigned long start, unsigned long end)
-{
-	unsigned long pfn;
-
-	printk(KERN_INFO "Node: %d, start_pfn: %lx, end_pfn: %lx\n",
-			nid, start, end);
-	printk(KERN_DEBUG "  Setting physnode_map array to node %d for pfns:\n", nid);
-	printk(KERN_DEBUG "  ");
-	for (pfn = start; pfn < end; pfn += PAGES_PER_ELEMENT) {
-		physnode_map[pfn / PAGES_PER_ELEMENT] = nid;
-		printk(KERN_CONT "%lx ", pfn);
-	}
-	printk(KERN_CONT "\n");
-}
-
-unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
-					      unsigned long end_pfn)
-{
-	unsigned long nr_pages = end_pfn - start_pfn;
-
-	if (!nr_pages)
-		return 0;
-
-	return (nr_pages + 1) * sizeof(struct page);
-}
-#endif
-
-extern unsigned long find_max_low_pfn(void);
-extern unsigned long highend_pfn, highstart_pfn;
-
-#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
-
-unsigned long node_remap_size[MAX_NUMNODES];
-static void *node_remap_start_vaddr[MAX_NUMNODES];
-void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
-
-static unsigned long kva_start_pfn;
-static unsigned long kva_pages;
-/*
- * FLAT - support for basic PC memory model with discontig enabled, essentially
- *        a single node with all available processors in it with a flat
- *        memory map.
- */
-int __init get_memcfg_numa_flat(void)
-{
-	printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");
-
-	node_start_pfn[0] = 0;
-	node_end_pfn[0] = max_pfn;
-	e820_register_active_regions(0, 0, max_pfn);
-	memory_present(0, 0, max_pfn);
-	node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn);
-
-        /* Indicate there is one node available. */
-	nodes_clear(node_online_map);
-	node_set_online(0);
-	return 1;
-}
-
-/*
- * Find the highest page frame number we have available for the node
- */
-static void __init propagate_e820_map_node(int nid)
-{
-	if (node_end_pfn[nid] > max_pfn)
-		node_end_pfn[nid] = max_pfn;
-	/*
-	 * if a user has given mem=XXXX, then we need to make sure 
-	 * that the node _starts_ before that, too, not just ends
-	 */
-	if (node_start_pfn[nid] > max_pfn)
-		node_start_pfn[nid] = max_pfn;
-	BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]);
-}
-
-/* 
- * Allocate memory for the pg_data_t for this node via a crude pre-bootmem
- * method.  For node zero take this from the bottom of memory, for
- * subsequent nodes place them at node_remap_start_vaddr which contains
- * node local data in physically node local memory.  See setup_memory()
- * for details.
- */
-static void __init allocate_pgdat(int nid)
-{
-	char buf[16];
-
-	if (node_has_online_mem(nid) && node_remap_start_vaddr[nid])
-		NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid];
-	else {
-		unsigned long pgdat_phys;
-		pgdat_phys = find_e820_area(min_low_pfn<<PAGE_SHIFT,
-				 max_pfn_mapped<<PAGE_SHIFT,
-				 sizeof(pg_data_t),
-				 PAGE_SIZE);
-		NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
-		memset(buf, 0, sizeof(buf));
-		sprintf(buf, "NODE_DATA %d",  nid);
-		reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf);
-	}
-	printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
-		nid, (unsigned long)NODE_DATA(nid));
-}
-
-/*
- * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel
- * virtual address space (KVA) is reserved and portions of nodes are mapped
- * using it. This is to allow node-local memory to be allocated for
- * structures that would normally require ZONE_NORMAL. The memory is
- * allocated with alloc_remap() and callers should be prepared to allocate
- * from the bootmem allocator instead.
- */
-static unsigned long node_remap_start_pfn[MAX_NUMNODES];
-static void *node_remap_end_vaddr[MAX_NUMNODES];
-static void *node_remap_alloc_vaddr[MAX_NUMNODES];
-static unsigned long node_remap_offset[MAX_NUMNODES];
-
-void *alloc_remap(int nid, unsigned long size)
-{
-	void *allocation = node_remap_alloc_vaddr[nid];
-
-	size = ALIGN(size, L1_CACHE_BYTES);
-
-	if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid])
-		return 0;
-
-	node_remap_alloc_vaddr[nid] += size;
-	memset(allocation, 0, size);
-
-	return allocation;
-}
-
-static void __init remap_numa_kva(void)
-{
-	void *vaddr;
-	unsigned long pfn;
-	int node;
-
-	for_each_online_node(node) {
-		printk(KERN_DEBUG "remap_numa_kva: node %d\n", node);
-		for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) {
-			vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT);
-			printk(KERN_DEBUG "remap_numa_kva: %08lx to pfn %08lx\n",
-				(unsigned long)vaddr,
-				node_remap_start_pfn[node] + pfn);
-			set_pmd_pfn((ulong) vaddr, 
-				node_remap_start_pfn[node] + pfn, 
-				PAGE_KERNEL_LARGE);
-		}
-	}
-}
-
-static unsigned long calculate_numa_remap_pages(void)
-{
-	int nid;
-	unsigned long size, reserve_pages = 0;
-
-	for_each_online_node(nid) {
-		u64 node_kva_target;
-		u64 node_kva_final;
-
-		/*
-		 * The acpi/srat node info can show hot-add memroy zones
-		 * where memory could be added but not currently present.
-		 */
-		printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
-			nid, node_start_pfn[nid], node_end_pfn[nid]);
-		if (node_start_pfn[nid] > max_pfn)
-			continue;
-		if (!node_end_pfn[nid])
-			continue;
-		if (node_end_pfn[nid] > max_pfn)
-			node_end_pfn[nid] = max_pfn;
-
-		/* ensure the remap includes space for the pgdat. */
-		size = node_remap_size[nid] + sizeof(pg_data_t);
-
-		/* convert size to large (pmd size) pages, rounding up */
-		size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES;
-		/* now the roundup is correct, convert to PAGE_SIZE pages */
-		size = size * PTRS_PER_PTE;
-
-		node_kva_target = round_down(node_end_pfn[nid] - size,
-						 PTRS_PER_PTE);
-		node_kva_target <<= PAGE_SHIFT;
-		do {
-			node_kva_final = find_e820_area(node_kva_target,
-					((u64)node_end_pfn[nid])<<PAGE_SHIFT,
-						((u64)size)<<PAGE_SHIFT,
-						LARGE_PAGE_BYTES);
-			node_kva_target -= LARGE_PAGE_BYTES;
-		} while (node_kva_final == -1ULL &&
-			 (node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid]));
-
-		if (node_kva_final == -1ULL)
-			panic("Can not get kva ram\n");
-
-		node_remap_size[nid] = size;
-		node_remap_offset[nid] = reserve_pages;
-		reserve_pages += size;
-		printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of"
-				  " node %d at %llx\n",
-				size, nid, node_kva_final>>PAGE_SHIFT);
-
-		/*
-		 *  prevent kva address below max_low_pfn want it on system
-		 *  with less memory later.
-		 *  layout will be: KVA address , KVA RAM
-		 *
-		 *  we are supposed to only record the one less then max_low_pfn
-		 *  but we could have some hole in high memory, and it will only
-		 *  check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide
-		 *  to use it as free.
-		 *  So reserve_early here, hope we don't run out of that array
-		 */
-		reserve_early(node_kva_final,
-			      node_kva_final+(((u64)size)<<PAGE_SHIFT),
-			      "KVA RAM");
-
-		node_remap_start_pfn[nid] = node_kva_final>>PAGE_SHIFT;
-		remove_active_range(nid, node_remap_start_pfn[nid],
-					 node_remap_start_pfn[nid] + size);
-	}
-	printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n",
-			reserve_pages);
-	return reserve_pages;
-}
-
-static void init_remap_allocator(int nid)
-{
-	node_remap_start_vaddr[nid] = pfn_to_kaddr(
-			kva_start_pfn + node_remap_offset[nid]);
-	node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] +
-		(node_remap_size[nid] * PAGE_SIZE);
-	node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] +
-		ALIGN(sizeof(pg_data_t), PAGE_SIZE);
-
-	printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid,
-		(ulong) node_remap_start_vaddr[nid],
-		(ulong) node_remap_end_vaddr[nid]);
-}
-
-void __init initmem_init(unsigned long start_pfn,
-				  unsigned long end_pfn)
-{
-	int nid;
-	long kva_target_pfn;
-
-	/*
-	 * When mapping a NUMA machine we allocate the node_mem_map arrays
-	 * from node local memory.  They are then mapped directly into KVA
-	 * between zone normal and vmalloc space.  Calculate the size of
-	 * this space and use it to adjust the boundary between ZONE_NORMAL
-	 * and ZONE_HIGHMEM.
-	 */
-
-	get_memcfg_numa();
-
-	kva_pages = round_up(calculate_numa_remap_pages(), PTRS_PER_PTE);
-
-	kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE);
-	do {
-		kva_start_pfn = find_e820_area(kva_target_pfn<<PAGE_SHIFT,
-					max_low_pfn<<PAGE_SHIFT,
-					kva_pages<<PAGE_SHIFT,
-					PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT;
-		kva_target_pfn -= PTRS_PER_PTE;
-	} while (kva_start_pfn == -1UL && kva_target_pfn > min_low_pfn);
-
-	if (kva_start_pfn == -1UL)
-		panic("Can not get kva space\n");
-
-	printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n",
-		kva_start_pfn, max_low_pfn);
-	printk(KERN_INFO "max_pfn = %lx\n", max_pfn);
-
-	/* avoid clash with initrd */
-	reserve_early(kva_start_pfn<<PAGE_SHIFT,
-		      (kva_start_pfn + kva_pages)<<PAGE_SHIFT,
-		     "KVA PG");
-#ifdef CONFIG_HIGHMEM
-	highstart_pfn = highend_pfn = max_pfn;
-	if (max_pfn > max_low_pfn)
-		highstart_pfn = max_low_pfn;
-	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
-	       pages_to_mb(highend_pfn - highstart_pfn));
-	num_physpages = highend_pfn;
-	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
-#else
-	num_physpages = max_low_pfn;
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
-#endif
-	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
-			pages_to_mb(max_low_pfn));
-	printk(KERN_DEBUG "max_low_pfn = %lx, highstart_pfn = %lx\n",
-			max_low_pfn, highstart_pfn);
-
-	printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
-			(ulong) pfn_to_kaddr(max_low_pfn));
-	for_each_online_node(nid) {
-		init_remap_allocator(nid);
-
-		allocate_pgdat(nid);
-	}
-	remap_numa_kva();
-
-	printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
-			(ulong) pfn_to_kaddr(highstart_pfn));
-	for_each_online_node(nid)
-		propagate_e820_map_node(nid);
-
-	for_each_online_node(nid)
-		memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
-
-	NODE_DATA(0)->bdata = &bootmem_node_data[0];
-	setup_bootmem_allocator();
-}
-
-void __init set_highmem_pages_init(void)
-{
-#ifdef CONFIG_HIGHMEM
-	struct zone *zone;
-	int nid;
-
-	for_each_zone(zone) {
-		unsigned long zone_start_pfn, zone_end_pfn;
-
-		if (!is_highmem(zone))
-			continue;
-
-		zone_start_pfn = zone->zone_start_pfn;
-		zone_end_pfn = zone_start_pfn + zone->spanned_pages;
-
-		nid = zone_to_nid(zone);
-		printk(KERN_INFO "Initializing %s for node %d (%08lx:%08lx)\n",
-				zone->name, nid, zone_start_pfn, zone_end_pfn);
-
-		add_highpages_with_active_regions(nid, zone_start_pfn,
-				 zone_end_pfn);
-	}
-	totalram_pages += totalhigh_pages;
-#endif
-}
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-static int paddr_to_nid(u64 addr)
-{
-	int nid;
-	unsigned long pfn = PFN_DOWN(addr);
-
-	for_each_node(nid)
-		if (node_start_pfn[nid] <= pfn &&
-		    pfn < node_end_pfn[nid])
-			return nid;
-
-	return -1;
-}
-
-/*
- * This function is used to ask node id BEFORE memmap and mem_section's
- * initialization (pfn_to_nid() can't be used yet).
- * If _PXM is not defined on ACPI's DSDT, node id must be found by this.
- */
-int memory_add_physaddr_to_nid(u64 addr)
-{
-	int nid = paddr_to_nid(addr);
-	return (nid >= 0) ? nid : 0;
-}
-
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
-
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index a20d1fa..e7277cb 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -148,8 +148,8 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 	 * we have now. "break" is either changing perms, levels or
 	 * address space marker.
 	 */
-	prot = pgprot_val(new_prot) & ~(PTE_PFN_MASK);
-	cur = pgprot_val(st->current_prot) & ~(PTE_PFN_MASK);
+	prot = pgprot_val(new_prot) & PTE_FLAGS_MASK;
+	cur = pgprot_val(st->current_prot) & PTE_FLAGS_MASK;
 
 	if (!st->level) {
 		/* First entry */
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 455f3fe..31e8730 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -35,6 +35,7 @@
 #include <asm/tlbflush.h>
 #include <asm/proto.h>
 #include <asm-generic/sections.h>
+#include <asm/traps.h>
 
 /*
  * Page fault error code bits
@@ -357,8 +358,6 @@ static int is_errata100(struct pt_regs *regs, unsigned long address)
 	return 0;
 }
 
-void do_invalid_op(struct pt_regs *, unsigned long);
-
 static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
 {
 #ifdef CONFIG_X86_F00F_BUG
@@ -593,11 +592,6 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	unsigned long flags;
 #endif
 
-	/*
-	 * We can fault from pretty much anywhere, with unknown IRQ state.
-	 */
-	trace_hardirqs_fixup();
-
 	tsk = current;
 	mm = tsk->mm;
 	prefetchw(&mm->mmap_sem);
@@ -646,24 +640,23 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	}
 
 
-#ifdef CONFIG_X86_32
-	/* It's safe to allow irq's after cr2 has been saved and the vmalloc
-	   fault has been handled. */
-	if (regs->flags & (X86_EFLAGS_IF | X86_VM_MASK))
-		local_irq_enable();
-
 	/*
-	 * If we're in an interrupt, have no user context or are running in an
-	 * atomic region then we must not take the fault.
+	 * It's safe to allow irq's after cr2 has been saved and the
+	 * vmalloc fault has been handled.
+	 *
+	 * User-mode registers count as a user access even for any
+	 * potential system fault or CPU buglet.
 	 */
-	if (in_atomic() || !mm)
-		goto bad_area_nosemaphore;
-#else /* CONFIG_X86_64 */
-	if (likely(regs->flags & X86_EFLAGS_IF))
+	if (user_mode_vm(regs)) {
+		local_irq_enable();
+		error_code |= PF_USER;
+	} else if (regs->flags & X86_EFLAGS_IF)
 		local_irq_enable();
 
+#ifdef CONFIG_X86_64
 	if (unlikely(error_code & PF_RSVD))
 		pgtable_bad(address, regs, error_code);
+#endif
 
 	/*
 	 * If we're in an interrupt, have no user context or are running in an
@@ -672,15 +665,9 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	if (unlikely(in_atomic() || !mm))
 		goto bad_area_nosemaphore;
 
-	/*
-	 * User-mode registers count as a user access even for any
-	 * potential system fault or CPU buglet.
-	 */
-	if (user_mode_vm(regs))
-		error_code |= PF_USER;
 again:
-#endif
-	/* When running in the kernel we expect faults to occur only to
+	/*
+	 * When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
 	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
 	 * erroneous fault occurring in a code path which already holds mmap_sem
@@ -743,9 +730,6 @@ good_area:
 			goto bad_area;
 	}
 
-#ifdef CONFIG_X86_32
-survive:
-#endif
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
@@ -880,12 +864,11 @@ out_of_memory:
 	up_read(&mm->mmap_sem);
 	if (is_global_init(tsk)) {
 		yield();
-#ifdef CONFIG_X86_32
-		down_read(&mm->mmap_sem);
-		goto survive;
-#else
+		/*
+		 * Re-lookup the vma - in theory the vma tree might
+		 * have changed:
+		 */
 		goto again;
-#endif
 	}
 
 	printk("VM: killing process %s\n", tsk->comm);
@@ -915,15 +898,15 @@ LIST_HEAD(pgd_list);
 
 void vmalloc_sync_all(void)
 {
-#ifdef CONFIG_X86_32
-	unsigned long start = VMALLOC_START & PGDIR_MASK;
 	unsigned long address;
 
+#ifdef CONFIG_X86_32
 	if (SHARED_KERNEL_PMD)
 		return;
 
-	BUILD_BUG_ON(TASK_SIZE & ~PGDIR_MASK);
-	for (address = start; address >= TASK_SIZE; address += PGDIR_SIZE) {
+	for (address = VMALLOC_START & PMD_MASK;
+	     address >= TASK_SIZE && address < FIXADDR_TOP;
+	     address += PMD_SIZE) {
 		unsigned long flags;
 		struct page *page;
 
@@ -936,10 +919,8 @@ void vmalloc_sync_all(void)
 		spin_unlock_irqrestore(&pgd_lock, flags);
 	}
 #else /* CONFIG_X86_64 */
-	unsigned long start = VMALLOC_START & PGDIR_MASK;
-	unsigned long address;
-
-	for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) {
+	for (address = VMALLOC_START & PGDIR_MASK; address <= VMALLOC_END;
+	     address += PGDIR_SIZE) {
 		const pgd_t *pgd_ref = pgd_offset_k(address);
 		unsigned long flags;
 		struct page *page;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 007bb06..4ba373c 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -82,7 +82,7 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
 		pte_t pte = gup_get_pte(ptep);
 		struct page *page;
 
-		if ((pte_val(pte) & (mask | _PAGE_SPECIAL)) != mask) {
+		if ((pte_flags(pte) & (mask | _PAGE_SPECIAL)) != mask) {
 			pte_unmap(ptep);
 			return 0;
 		}
@@ -116,10 +116,10 @@ static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
 	mask = _PAGE_PRESENT|_PAGE_USER;
 	if (write)
 		mask |= _PAGE_RW;
-	if ((pte_val(pte) & mask) != mask)
+	if ((pte_flags(pte) & mask) != mask)
 		return 0;
 	/* hugepages are never "special" */
-	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(pte_flags(pte) & _PAGE_SPECIAL);
 	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
 
 	refs = 0;
@@ -173,10 +173,10 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
 	mask = _PAGE_PRESENT|_PAGE_USER;
 	if (write)
 		mask |= _PAGE_RW;
-	if ((pte_val(pte) & mask) != mask)
+	if ((pte_flags(pte) & mask) != mask)
 		return 0;
 	/* hugepages are never "special" */
-	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(pte_flags(pte) & _PAGE_SPECIAL);
 	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
 
 	refs = 0;
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 165c871..bcc079c 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -137,6 +137,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
 
 	return (void*) vaddr;
 }
+EXPORT_SYMBOL_GPL(kmap_atomic_pfn); /* temporarily in use by i915 GEM until vmap */
 
 struct page *kmap_atomic_to_page(void *ptr)
 {
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 60ec1d0..8396868 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -31,6 +31,7 @@
 #include <linux/cpumask.h>
 
 #include <asm/asm.h>
+#include <asm/bios_ebda.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -47,6 +48,7 @@
 #include <asm/paravirt.h>
 #include <asm/setup.h>
 #include <asm/cacheflush.h>
+#include <asm/smp.h>
 
 unsigned int __VMALLOC_RESERVE = 128 << 20;
 
@@ -194,11 +196,30 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base,
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
-	unsigned pages_2m = 0, pages_4k = 0;
+	unsigned pages_2m, pages_4k;
+	int mapping_iter;
+
+	/*
+	 * First iteration will setup identity mapping using large/small pages
+	 * based on use_pse, with other attributes same as set by
+	 * the early code in head_32.S
+	 *
+	 * Second iteration will setup the appropriate attributes (NX, GLOBAL..)
+	 * as desired for the kernel identity mapping.
+	 *
+	 * This two pass mechanism conforms to the TLB app note which says:
+	 *
+	 *     "Software should not write to a paging-structure entry in a way
+	 *      that would change, for any linear address, both the page size
+	 *      and either the page frame or attributes."
+	 */
+	mapping_iter = 1;
 
 	if (!cpu_has_pse)
 		use_pse = 0;
 
+repeat:
+	pages_2m = pages_4k = 0;
 	pfn = start_pfn;
 	pgd_idx = pgd_index((pfn<<PAGE_SHIFT) + PAGE_OFFSET);
 	pgd = pgd_base + pgd_idx;
@@ -224,6 +245,13 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base,
 			if (use_pse) {
 				unsigned int addr2;
 				pgprot_t prot = PAGE_KERNEL_LARGE;
+				/*
+				 * first pass will use the same initial
+				 * identity mapping attribute + _PAGE_PSE.
+				 */
+				pgprot_t init_prot =
+					__pgprot(PTE_IDENT_ATTR |
+						 _PAGE_PSE);
 
 				addr2 = (pfn + PTRS_PER_PTE-1) * PAGE_SIZE +
 					PAGE_OFFSET + PAGE_SIZE-1;
@@ -233,7 +261,10 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base,
 					prot = PAGE_KERNEL_LARGE_EXEC;
 
 				pages_2m++;
-				set_pmd(pmd, pfn_pmd(pfn, prot));
+				if (mapping_iter == 1)
+					set_pmd(pmd, pfn_pmd(pfn, init_prot));
+				else
+					set_pmd(pmd, pfn_pmd(pfn, prot));
 
 				pfn += PTRS_PER_PTE;
 				continue;
@@ -245,17 +276,43 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base,
 			for (; pte_ofs < PTRS_PER_PTE && pfn < end_pfn;
 			     pte++, pfn++, pte_ofs++, addr += PAGE_SIZE) {
 				pgprot_t prot = PAGE_KERNEL;
+				/*
+				 * first pass will use the same initial
+				 * identity mapping attribute.
+				 */
+				pgprot_t init_prot = __pgprot(PTE_IDENT_ATTR);
 
 				if (is_kernel_text(addr))
 					prot = PAGE_KERNEL_EXEC;
 
 				pages_4k++;
-				set_pte(pte, pfn_pte(pfn, prot));
+				if (mapping_iter == 1)
+					set_pte(pte, pfn_pte(pfn, init_prot));
+				else
+					set_pte(pte, pfn_pte(pfn, prot));
 			}
 		}
 	}
-	update_page_count(PG_LEVEL_2M, pages_2m);
-	update_page_count(PG_LEVEL_4K, pages_4k);
+	if (mapping_iter == 1) {
+		/*
+		 * update direct mapping page count only in the first
+		 * iteration.
+		 */
+		update_page_count(PG_LEVEL_2M, pages_2m);
+		update_page_count(PG_LEVEL_4K, pages_4k);
+
+		/*
+		 * local global flush tlb, which will flush the previous
+		 * mappings present in both small and large page TLB's.
+		 */
+		__flush_tlb_all();
+
+		/*
+		 * Second iteration will set the actual desired PTE attributes.
+		 */
+		mapping_iter = 2;
+		goto repeat;
+	}
 }
 
 /*
@@ -501,7 +558,7 @@ void zap_low_mappings(void)
 
 int nx_enabled;
 
-pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL);
+pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL | _PAGE_IOMAP);
 EXPORT_SYMBOL_GPL(__supported_pte_mask);
 
 #ifdef CONFIG_X86_PAE
@@ -718,7 +775,7 @@ void __init setup_bootmem_allocator(void)
 	after_init_bootmem = 1;
 }
 
-static void __init find_early_table_space(unsigned long end)
+static void __init find_early_table_space(unsigned long end, int use_pse)
 {
 	unsigned long puds, pmds, ptes, tables, start;
 
@@ -728,7 +785,7 @@ static void __init find_early_table_space(unsigned long end)
 	pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
 	tables += PAGE_ALIGN(pmds * sizeof(pmd_t));
 
-	if (cpu_has_pse) {
+	if (use_pse) {
 		unsigned long extra;
 
 		extra = end - ((end>>PMD_SHIFT) << PMD_SHIFT);
@@ -768,12 +825,22 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	pgd_t *pgd_base = swapper_pg_dir;
 	unsigned long start_pfn, end_pfn;
 	unsigned long big_page_start;
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	/*
+	 * For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
+	 * This will simplify cpa(), which otherwise needs to support splitting
+	 * large pages into small in interrupt context, etc.
+	 */
+	int use_pse = 0;
+#else
+	int use_pse = cpu_has_pse;
+#endif
 
 	/*
 	 * Find space for the kernel direct mapping tables.
 	 */
 	if (!after_init_bootmem)
-		find_early_table_space(end);
+		find_early_table_space(end, use_pse);
 
 #ifdef CONFIG_X86_PAE
 	set_nx();
@@ -819,7 +886,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	end_pfn = (end>>PMD_SHIFT) << (PMD_SHIFT - PAGE_SHIFT);
 	if (start_pfn < end_pfn)
 		kernel_physical_mapping_init(pgd_base, start_pfn, end_pfn,
-						cpu_has_pse);
+					     use_pse);
 
 	/* tail is not big page alignment ? */
 	start_pfn = end_pfn;
@@ -903,6 +970,8 @@ void __init mem_init(void)
 	int codesize, reservedpages, datasize, initsize;
 	int tmp;
 
+	start_periodic_check_for_corruption();
+
 #ifdef CONFIG_FLATMEM
 	BUG_ON(!mem_map);
 #endif
@@ -982,7 +1051,6 @@ void __init mem_init(void)
 	if (boot_cpu_data.wp_works_ok < 0)
 		test_wp_bit();
 
-	cpa_init();
 	save_pg_dir();
 	zap_low_mappings();
 }
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index d3746ef..b8e461d 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -31,6 +31,7 @@
 #include <linux/nmi.h>
 
 #include <asm/processor.h>
+#include <asm/bios_ebda.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -88,6 +89,62 @@ early_param("gbpages", parse_direct_gbpages_on);
 
 int after_bootmem;
 
+pteval_t __supported_pte_mask __read_mostly = ~_PAGE_IOMAP;
+EXPORT_SYMBOL_GPL(__supported_pte_mask);
+
+static int do_not_nx __cpuinitdata;
+
+/*
+ * noexec=on|off
+ * Control non-executable mappings for 64-bit processes.
+ *
+ * on	Enable (default)
+ * off	Disable
+ */
+static int __init nonx_setup(char *str)
+{
+	if (!str)
+		return -EINVAL;
+	if (!strncmp(str, "on", 2)) {
+		__supported_pte_mask |= _PAGE_NX;
+		do_not_nx = 0;
+	} else if (!strncmp(str, "off", 3)) {
+		do_not_nx = 1;
+		__supported_pte_mask &= ~_PAGE_NX;
+	}
+	return 0;
+}
+early_param("noexec", nonx_setup);
+
+void __cpuinit check_efer(void)
+{
+	unsigned long efer;
+
+	rdmsrl(MSR_EFER, efer);
+	if (!(efer & EFER_NX) || do_not_nx)
+		__supported_pte_mask &= ~_PAGE_NX;
+}
+
+int force_personality32;
+
+/*
+ * noexec32=on|off
+ * Control non executable heap for 32bit processes.
+ * To control the stack too use noexec=off
+ *
+ * on	PROT_READ does not imply PROT_EXEC for 32-bit processes (default)
+ * off	PROT_READ implies PROT_EXEC
+ */
+static int __init nonx32_setup(char *str)
+{
+	if (!strcmp(str, "on"))
+		force_personality32 &= ~READ_IMPLIES_EXEC;
+	else if (!strcmp(str, "off"))
+		force_personality32 |= READ_IMPLIES_EXEC;
+	return 1;
+}
+__setup("noexec32=", nonx32_setup);
+
 /*
  * NOTE: This function is marked __ref because it calls __init function
  * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0.
@@ -139,9 +196,6 @@ set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte)
 	}
 
 	pte = pte_offset_kernel(pmd, vaddr);
-	if (!pte_none(*pte) && pte_val(new_pte) &&
-	    pte_val(*pte) != (pte_val(new_pte) & __supported_pte_mask))
-		pte_ERROR(*pte);
 	set_pte(pte, new_pte);
 
 	/*
@@ -225,7 +279,7 @@ void __init init_extra_mapping_uc(unsigned long phys, unsigned long size)
 void __init cleanup_highmap(void)
 {
 	unsigned long vaddr = __START_KERNEL_map;
-	unsigned long end = round_up((unsigned long)_end, PMD_SIZE) - 1;
+	unsigned long end = roundup((unsigned long)_end, PMD_SIZE) - 1;
 	pmd_t *pmd = level2_kernel_pgt;
 	pmd_t *last_pmd = pmd + PTRS_PER_PMD;
 
@@ -256,7 +310,7 @@ static __ref void *alloc_low_page(unsigned long *phys)
 	if (pfn >= table_top)
 		panic("alloc_low_page: ran out of memory");
 
-	adr = early_ioremap(pfn * PAGE_SIZE, PAGE_SIZE);
+	adr = early_memremap(pfn * PAGE_SIZE, PAGE_SIZE);
 	memset(adr, 0, PAGE_SIZE);
 	*phys  = pfn * PAGE_SIZE;
 	return adr;
@@ -271,7 +325,8 @@ static __ref void unmap_low_page(void *adr)
 }
 
 static unsigned long __meminit
-phys_pte_init(pte_t *pte_page, unsigned long addr, unsigned long end)
+phys_pte_init(pte_t *pte_page, unsigned long addr, unsigned long end,
+	      pgprot_t prot)
 {
 	unsigned pages = 0;
 	unsigned long last_map_addr = end;
@@ -289,36 +344,43 @@ phys_pte_init(pte_t *pte_page, unsigned long addr, unsigned long end)
 			break;
 		}
 
+		/*
+		 * We will re-use the existing mapping.
+		 * Xen for example has some special requirements, like mapping
+		 * pagetable pages as RO. So assume someone who pre-setup
+		 * these mappings are more intelligent.
+		 */
 		if (pte_val(*pte))
 			continue;
 
 		if (0)
 			printk("   pte=%p addr=%lx pte=%016lx\n",
 			       pte, addr, pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL).pte);
-		set_pte(pte, pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL));
-		last_map_addr = (addr & PAGE_MASK) + PAGE_SIZE;
 		pages++;
+		set_pte(pte, pfn_pte(addr >> PAGE_SHIFT, prot));
+		last_map_addr = (addr & PAGE_MASK) + PAGE_SIZE;
 	}
+
 	update_page_count(PG_LEVEL_4K, pages);
 
 	return last_map_addr;
 }
 
 static unsigned long __meminit
-phys_pte_update(pmd_t *pmd, unsigned long address, unsigned long end)
+phys_pte_update(pmd_t *pmd, unsigned long address, unsigned long end,
+		pgprot_t prot)
 {
 	pte_t *pte = (pte_t *)pmd_page_vaddr(*pmd);
 
-	return phys_pte_init(pte, address, end);
+	return phys_pte_init(pte, address, end, prot);
 }
 
 static unsigned long __meminit
 phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
-			 unsigned long page_size_mask)
+	      unsigned long page_size_mask, pgprot_t prot)
 {
 	unsigned long pages = 0;
 	unsigned long last_map_addr = end;
-	unsigned long start = address;
 
 	int i = pmd_index(address);
 
@@ -326,6 +388,7 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 		unsigned long pte_phys;
 		pmd_t *pmd = pmd_page + pmd_index(address);
 		pte_t *pte;
+		pgprot_t new_prot = prot;
 
 		if (address >= end) {
 			if (!after_bootmem) {
@@ -339,27 +402,40 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 			if (!pmd_large(*pmd)) {
 				spin_lock(&init_mm.page_table_lock);
 				last_map_addr = phys_pte_update(pmd, address,
-								end);
+								end, prot);
 				spin_unlock(&init_mm.page_table_lock);
+				continue;
 			}
-			/* Count entries we're using from level2_ident_pgt */
-			if (start == 0)
-				pages++;
-			continue;
+			/*
+			 * If we are ok with PG_LEVEL_2M mapping, then we will
+			 * use the existing mapping,
+			 *
+			 * Otherwise, we will split the large page mapping but
+			 * use the same existing protection bits except for
+			 * large page, so that we don't violate Intel's TLB
+			 * Application note (317080) which says, while changing
+			 * the page sizes, new and old translations should
+			 * not differ with respect to page frame and
+			 * attributes.
+			 */
+			if (page_size_mask & (1 << PG_LEVEL_2M))
+				continue;
+			new_prot = pte_pgprot(pte_clrhuge(*(pte_t *)pmd));
 		}
 
 		if (page_size_mask & (1<<PG_LEVEL_2M)) {
 			pages++;
 			spin_lock(&init_mm.page_table_lock);
 			set_pte((pte_t *)pmd,
-				pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+				pfn_pte(address >> PAGE_SHIFT,
+					__pgprot(pgprot_val(prot) | _PAGE_PSE)));
 			spin_unlock(&init_mm.page_table_lock);
 			last_map_addr = (address & PMD_MASK) + PMD_SIZE;
 			continue;
 		}
 
 		pte = alloc_low_page(&pte_phys);
-		last_map_addr = phys_pte_init(pte, address, end);
+		last_map_addr = phys_pte_init(pte, address, end, new_prot);
 		unmap_low_page(pte);
 
 		spin_lock(&init_mm.page_table_lock);
@@ -372,12 +448,12 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 
 static unsigned long __meminit
 phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end,
-			 unsigned long page_size_mask)
+		unsigned long page_size_mask, pgprot_t prot)
 {
 	pmd_t *pmd = pmd_offset(pud, 0);
 	unsigned long last_map_addr;
 
-	last_map_addr = phys_pmd_init(pmd, address, end, page_size_mask);
+	last_map_addr = phys_pmd_init(pmd, address, end, page_size_mask, prot);
 	__flush_tlb_all();
 	return last_map_addr;
 }
@@ -394,6 +470,7 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
 		unsigned long pmd_phys;
 		pud_t *pud = pud_page + pud_index(addr);
 		pmd_t *pmd;
+		pgprot_t prot = PAGE_KERNEL;
 
 		if (addr >= end)
 			break;
@@ -405,10 +482,26 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
 		}
 
 		if (pud_val(*pud)) {
-			if (!pud_large(*pud))
+			if (!pud_large(*pud)) {
 				last_map_addr = phys_pmd_update(pud, addr, end,
-							 page_size_mask);
-			continue;
+							 page_size_mask, prot);
+				continue;
+			}
+			/*
+			 * If we are ok with PG_LEVEL_1G mapping, then we will
+			 * use the existing mapping.
+			 *
+			 * Otherwise, we will split the gbpage mapping but use
+			 * the same existing protection  bits except for large
+			 * page, so that we don't violate Intel's TLB
+			 * Application note (317080) which says, while changing
+			 * the page sizes, new and old translations should
+			 * not differ with respect to page frame and
+			 * attributes.
+			 */
+			if (page_size_mask & (1 << PG_LEVEL_1G))
+				continue;
+			prot = pte_pgprot(pte_clrhuge(*(pte_t *)pud));
 		}
 
 		if (page_size_mask & (1<<PG_LEVEL_1G)) {
@@ -422,7 +515,8 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
 		}
 
 		pmd = alloc_low_page(&pmd_phys);
-		last_map_addr = phys_pmd_init(pmd, addr, end, page_size_mask);
+		last_map_addr = phys_pmd_init(pmd, addr, end, page_size_mask,
+					      prot);
 		unmap_low_page(pmd);
 
 		spin_lock(&init_mm.page_table_lock);
@@ -430,6 +524,7 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
 		spin_unlock(&init_mm.page_table_lock);
 	}
 	__flush_tlb_all();
+
 	update_page_count(PG_LEVEL_1G, pages);
 
 	return last_map_addr;
@@ -446,27 +541,28 @@ phys_pud_update(pgd_t *pgd, unsigned long addr, unsigned long end,
 	return phys_pud_init(pud, addr, end, page_size_mask);
 }
 
-static void __init find_early_table_space(unsigned long end)
+static void __init find_early_table_space(unsigned long end, int use_pse,
+					  int use_gbpages)
 {
 	unsigned long puds, pmds, ptes, tables, start;
 
 	puds = (end + PUD_SIZE - 1) >> PUD_SHIFT;
-	tables = round_up(puds * sizeof(pud_t), PAGE_SIZE);
-	if (direct_gbpages) {
+	tables = roundup(puds * sizeof(pud_t), PAGE_SIZE);
+	if (use_gbpages) {
 		unsigned long extra;
 		extra = end - ((end>>PUD_SHIFT) << PUD_SHIFT);
 		pmds = (extra + PMD_SIZE - 1) >> PMD_SHIFT;
 	} else
 		pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
-	tables += round_up(pmds * sizeof(pmd_t), PAGE_SIZE);
+	tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE);
 
-	if (cpu_has_pse) {
+	if (use_pse) {
 		unsigned long extra;
 		extra = end - ((end>>PMD_SHIFT) << PMD_SHIFT);
 		ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	} else
 		ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	tables += round_up(ptes * sizeof(pte_t), PAGE_SIZE);
+	tables += roundup(ptes * sizeof(pte_t), PAGE_SIZE);
 
 	/*
 	 * RED-PEN putting page tables only on node 0 could
@@ -528,6 +624,7 @@ static unsigned long __init kernel_physical_mapping_init(unsigned long start,
 		pgd_populate(&init_mm, pgd, __va(pud_phys));
 		spin_unlock(&init_mm.page_table_lock);
 	}
+	__flush_tlb_all();
 
 	return last_map_addr;
 }
@@ -571,6 +668,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 
 	struct map_range mr[NR_RANGE_MR];
 	int nr_range, i;
+	int use_pse, use_gbpages;
 
 	printk(KERN_INFO "init_memory_mapping\n");
 
@@ -584,9 +682,21 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	if (!after_bootmem)
 		init_gbpages();
 
-	if (direct_gbpages)
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	/*
+	 * For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
+	 * This will simplify cpa(), which otherwise needs to support splitting
+	 * large pages into small in interrupt context, etc.
+	 */
+	use_pse = use_gbpages = 0;
+#else
+	use_pse = cpu_has_pse;
+	use_gbpages = direct_gbpages;
+#endif
+
+	if (use_gbpages)
 		page_size_mask |= 1 << PG_LEVEL_1G;
-	if (cpu_has_pse)
+	if (use_pse)
 		page_size_mask |= 1 << PG_LEVEL_2M;
 
 	memset(mr, 0, sizeof(mr));
@@ -636,7 +746,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 		old_start = mr[i].start;
 		memmove(&mr[i], &mr[i+1],
 			 (nr_range - 1 - i) * sizeof (struct map_range));
-		mr[i].start = old_start;
+		mr[i--].start = old_start;
 		nr_range--;
 	}
 
@@ -647,7 +757,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 			 (mr[i].page_size_mask & (1<<PG_LEVEL_2M))?"2M":"4k"));
 
 	if (!after_bootmem)
-		find_early_table_space(end);
+		find_early_table_space(end, use_pse, use_gbpages);
 
 	for (i = 0; i < nr_range; i++)
 		last_map_addr = kernel_physical_mapping_init(
@@ -769,6 +879,8 @@ void __init mem_init(void)
 {
 	long codesize, reservedpages, datasize, initsize;
 
+	start_periodic_check_for_corruption();
+
 	pci_iommu_alloc();
 
 	/* clear_bss() already clear the empty_zero_page */
@@ -806,8 +918,6 @@ void __init mem_init(void)
 		reservedpages << (PAGE_SHIFT-10),
 		datasize >> 10,
 		initsize >> 10);
-
-	cpa_init();
 }
 
 void free_init_pages(char *what, unsigned long begin, unsigned long end)
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index d4b6e6a..ae71e11 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -24,18 +24,47 @@
 
 #ifdef CONFIG_X86_64
 
+static inline int phys_addr_valid(unsigned long addr)
+{
+	return addr < (1UL << boot_cpu_data.x86_phys_bits);
+}
+
 unsigned long __phys_addr(unsigned long x)
 {
-	if (x >= __START_KERNEL_map)
-		return x - __START_KERNEL_map + phys_base;
-	return x - PAGE_OFFSET;
+	if (x >= __START_KERNEL_map) {
+		x -= __START_KERNEL_map;
+		VIRTUAL_BUG_ON(x >= KERNEL_IMAGE_SIZE);
+		x += phys_base;
+	} else {
+		VIRTUAL_BUG_ON(x < PAGE_OFFSET);
+		x -= PAGE_OFFSET;
+		VIRTUAL_BUG_ON(system_state == SYSTEM_BOOTING ? x > MAXMEM :
+					!phys_addr_valid(x));
+	}
+	return x;
 }
 EXPORT_SYMBOL(__phys_addr);
 
-static inline int phys_addr_valid(unsigned long addr)
+bool __virt_addr_valid(unsigned long x)
 {
-	return addr < (1UL << boot_cpu_data.x86_phys_bits);
+	if (x >= __START_KERNEL_map) {
+		x -= __START_KERNEL_map;
+		if (x >= KERNEL_IMAGE_SIZE)
+			return false;
+		x += phys_base;
+	} else {
+		if (x < PAGE_OFFSET)
+			return false;
+		x -= PAGE_OFFSET;
+		if (system_state == SYSTEM_BOOTING ?
+				x > MAXMEM : !phys_addr_valid(x)) {
+			return false;
+		}
+	}
+
+	return pfn_valid(x >> PAGE_SHIFT);
 }
+EXPORT_SYMBOL(__virt_addr_valid);
 
 #else
 
@@ -44,6 +73,28 @@ static inline int phys_addr_valid(unsigned long addr)
 	return 1;
 }
 
+#ifdef CONFIG_DEBUG_VIRTUAL
+unsigned long __phys_addr(unsigned long x)
+{
+	/* VMALLOC_* aren't constants; not available at the boot time */
+	VIRTUAL_BUG_ON(x < PAGE_OFFSET);
+	VIRTUAL_BUG_ON(system_state != SYSTEM_BOOTING &&
+		is_vmalloc_addr((void *) x));
+	return x - PAGE_OFFSET;
+}
+EXPORT_SYMBOL(__phys_addr);
+#endif
+
+bool __virt_addr_valid(unsigned long x)
+{
+	if (x < PAGE_OFFSET)
+		return false;
+	if (system_state != SYSTEM_BOOTING && is_vmalloc_addr((void *) x))
+		return false;
+	return pfn_valid((x - PAGE_OFFSET) >> PAGE_SHIFT);
+}
+EXPORT_SYMBOL(__virt_addr_valid);
+
 #endif
 
 int page_is_ram(unsigned long pagenr)
@@ -83,6 +134,25 @@ int page_is_ram(unsigned long pagenr)
 	return 0;
 }
 
+int pagerange_is_ram(unsigned long start, unsigned long end)
+{
+	int ram_page = 0, not_rampage = 0;
+	unsigned long page_nr;
+
+	for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
+	     ++page_nr) {
+		if (page_is_ram(page_nr))
+			ram_page = 1;
+		else
+			not_rampage = 1;
+
+		if (ram_page == not_rampage)
+			return -1;
+	}
+
+	return ram_page;
+}
+
 /*
  * Fix up the linear direct mapping of the kernel to avoid cache attribute
  * conflicts.
@@ -150,6 +220,12 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 		return (__force void __iomem *)phys_to_virt(phys_addr);
 
 	/*
+	 * Check if the request spans more than any BAR in the iomem resource
+	 * tree.
+	 */
+	WARN_ON(iomem_map_sanity_check(phys_addr, size));
+
+	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
 	 */
 	for (pfn = phys_addr >> PAGE_SHIFT;
@@ -204,16 +280,16 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	switch (prot_val) {
 	case _PAGE_CACHE_UC:
 	default:
-		prot = PAGE_KERNEL_NOCACHE;
+		prot = PAGE_KERNEL_IO_NOCACHE;
 		break;
 	case _PAGE_CACHE_UC_MINUS:
-		prot = PAGE_KERNEL_UC_MINUS;
+		prot = PAGE_KERNEL_IO_UC_MINUS;
 		break;
 	case _PAGE_CACHE_WC:
-		prot = PAGE_KERNEL_WC;
+		prot = PAGE_KERNEL_IO_WC;
 		break;
 	case _PAGE_CACHE_WB:
-		prot = PAGE_KERNEL;
+		prot = PAGE_KERNEL_IO;
 		break;
 	}
 
@@ -421,7 +497,7 @@ void unxlate_dev_mem_ptr(unsigned long phys, void *addr)
 	return;
 }
 
-int __initdata early_ioremap_debug;
+static int __initdata early_ioremap_debug;
 
 static int __init early_ioremap_debug_setup(char *str)
 {
@@ -530,12 +606,12 @@ static void __init __early_set_fixmap(enum fixed_addresses idx,
 }
 
 static inline void __init early_set_fixmap(enum fixed_addresses idx,
-					unsigned long phys)
+					   unsigned long phys, pgprot_t prot)
 {
 	if (after_paging_init)
-		set_fixmap(idx, phys);
+		__set_fixmap(idx, phys, prot);
 	else
-		__early_set_fixmap(idx, phys, PAGE_KERNEL);
+		__early_set_fixmap(idx, phys, prot);
 }
 
 static inline void __init early_clear_fixmap(enum fixed_addresses idx)
@@ -546,16 +622,22 @@ static inline void __init early_clear_fixmap(enum fixed_addresses idx)
 		__early_set_fixmap(idx, 0, __pgprot(0));
 }
 
-
-int __initdata early_ioremap_nested;
-
+static void *prev_map[FIX_BTMAPS_SLOTS] __initdata;
+static unsigned long prev_size[FIX_BTMAPS_SLOTS] __initdata;
 static int __init check_early_ioremap_leak(void)
 {
-	if (!early_ioremap_nested)
+	int count = 0;
+	int i;
+
+	for (i = 0; i < FIX_BTMAPS_SLOTS; i++)
+		if (prev_map[i])
+			count++;
+
+	if (!count)
 		return 0;
 	WARN(1, KERN_WARNING
 	       "Debug warning: early ioremap leak of %d areas detected.\n",
-		early_ioremap_nested);
+		count);
 	printk(KERN_WARNING
 		"please boot with early_ioremap_debug and report the dmesg.\n");
 
@@ -563,18 +645,33 @@ static int __init check_early_ioremap_leak(void)
 }
 late_initcall(check_early_ioremap_leak);
 
-void __init *early_ioremap(unsigned long phys_addr, unsigned long size)
+static void __init *__early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot)
 {
 	unsigned long offset, last_addr;
-	unsigned int nrpages, nesting;
+	unsigned int nrpages;
 	enum fixed_addresses idx0, idx;
+	int i, slot;
 
 	WARN_ON(system_state != SYSTEM_BOOTING);
 
-	nesting = early_ioremap_nested;
+	slot = -1;
+	for (i = 0; i < FIX_BTMAPS_SLOTS; i++) {
+		if (!prev_map[i]) {
+			slot = i;
+			break;
+		}
+	}
+
+	if (slot < 0) {
+		printk(KERN_INFO "early_iomap(%08lx, %08lx) not found slot\n",
+			 phys_addr, size);
+		WARN_ON(1);
+		return NULL;
+	}
+
 	if (early_ioremap_debug) {
 		printk(KERN_INFO "early_ioremap(%08lx, %08lx) [%d] => ",
-		       phys_addr, size, nesting);
+		       phys_addr, size, slot);
 		dump_stack();
 	}
 
@@ -585,17 +682,13 @@ void __init *early_ioremap(unsigned long phys_addr, unsigned long size)
 		return NULL;
 	}
 
-	if (nesting >= FIX_BTMAPS_NESTING) {
-		WARN_ON(1);
-		return NULL;
-	}
-	early_ioremap_nested++;
+	prev_size[slot] = size;
 	/*
 	 * Mappings have to be page-aligned
 	 */
 	offset = phys_addr & ~PAGE_MASK;
 	phys_addr &= PAGE_MASK;
-	size = PAGE_ALIGN(last_addr) - phys_addr;
+	size = PAGE_ALIGN(last_addr + 1) - phys_addr;
 
 	/*
 	 * Mappings have to fit in the FIX_BTMAP area.
@@ -609,10 +702,10 @@ void __init *early_ioremap(unsigned long phys_addr, unsigned long size)
 	/*
 	 * Ok, go for it..
 	 */
-	idx0 = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*nesting;
+	idx0 = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
 	idx = idx0;
 	while (nrpages > 0) {
-		early_set_fixmap(idx, phys_addr);
+		early_set_fixmap(idx, phys_addr, prot);
 		phys_addr += PAGE_SIZE;
 		--idx;
 		--nrpages;
@@ -620,7 +713,20 @@ void __init *early_ioremap(unsigned long phys_addr, unsigned long size)
 	if (early_ioremap_debug)
 		printk(KERN_CONT "%08lx + %08lx\n", offset, fix_to_virt(idx0));
 
-	return (void *) (offset + fix_to_virt(idx0));
+	prev_map[slot] = (void *) (offset + fix_to_virt(idx0));
+	return prev_map[slot];
+}
+
+/* Remap an IO device */
+void __init *early_ioremap(unsigned long phys_addr, unsigned long size)
+{
+	return __early_ioremap(phys_addr, size, PAGE_KERNEL_IO);
+}
+
+/* Remap memory */
+void __init *early_memremap(unsigned long phys_addr, unsigned long size)
+{
+	return __early_ioremap(phys_addr, size, PAGE_KERNEL);
 }
 
 void __init early_iounmap(void *addr, unsigned long size)
@@ -629,15 +735,33 @@ void __init early_iounmap(void *addr, unsigned long size)
 	unsigned long offset;
 	unsigned int nrpages;
 	enum fixed_addresses idx;
-	int nesting;
+	int i, slot;
+
+	slot = -1;
+	for (i = 0; i < FIX_BTMAPS_SLOTS; i++) {
+		if (prev_map[i] == addr) {
+			slot = i;
+			break;
+		}
+	}
+
+	if (slot < 0) {
+		printk(KERN_INFO "early_iounmap(%p, %08lx) not found slot\n",
+			 addr, size);
+		WARN_ON(1);
+		return;
+	}
 
-	nesting = --early_ioremap_nested;
-	if (WARN_ON(nesting < 0))
+	if (prev_size[slot] != size) {
+		printk(KERN_INFO "early_iounmap(%p, %08lx) [%d] size not consistent %08lx\n",
+			 addr, size, slot, prev_size[slot]);
+		WARN_ON(1);
 		return;
+	}
 
 	if (early_ioremap_debug) {
 		printk(KERN_INFO "early_iounmap(%p, %08lx) [%d]\n", addr,
-		       size, nesting);
+		       size, slot);
 		dump_stack();
 	}
 
@@ -649,12 +773,13 @@ void __init early_iounmap(void *addr, unsigned long size)
 	offset = virt_addr & ~PAGE_MASK;
 	nrpages = PAGE_ALIGN(offset + size - 1) >> PAGE_SHIFT;
 
-	idx = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*nesting;
+	idx = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
 	while (nrpages > 0) {
 		early_clear_fixmap(idx);
 		--idx;
 		--nrpages;
 	}
+	prev_map[slot] = 0;
 }
 
 void __this_fixmap_does_not_exist(void)
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 672e17f..9cab18b 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -61,9 +61,9 @@ static void __init memtest(unsigned long start_phys, unsigned long size,
 				last_bad += incr;
 			} else {
 				if (start_bad) {
-					printk(KERN_CONT "\n  %010lx bad mem addr %010lx - %010lx reserved",
+					printk(KERN_CONT "\n  %016lx bad mem addr %010lx - %010lx reserved",
 						val, start_bad, last_bad + incr);
-					reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+					reserve_early(start_bad, last_bad + incr, "BAD RAM");
 				}
 				start_bad = last_bad = start_phys_aligned;
 			}
@@ -72,9 +72,8 @@ static void __init memtest(unsigned long start_phys, unsigned long size,
 	if (start_bad) {
 		printk(KERN_CONT "\n  %016lx bad mem addr %010lx - %010lx reserved",
 			val, start_bad, last_bad + incr);
-		reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+		reserve_early(start_bad, last_bad + incr, "BAD RAM");
 	}
-
 }
 
 /* default is disabled */
diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index 635b50e..2c4baa8 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -56,13 +56,6 @@ struct remap_trace {
 static DEFINE_PER_CPU(struct trap_reason, pf_reason);
 static DEFINE_PER_CPU(struct mmiotrace_rw, cpu_trace);
 
-#if 0 /* XXX: no way gather this info anymore */
-/* Access to this is not per-cpu. */
-static DEFINE_PER_CPU(atomic_t, dropped);
-#endif
-
-static struct dentry *marker_file;
-
 static DEFINE_MUTEX(mmiotrace_mutex);
 static DEFINE_SPINLOCK(trace_lock);
 static atomic_t mmiotrace_enabled;
@@ -75,7 +68,7 @@ static LIST_HEAD(trace_list);		/* struct remap_trace */
  *   and trace_lock.
  * - Routines depending on is_enabled() must take trace_lock.
  * - trace_list users must hold trace_lock.
- * - is_enabled() guarantees that mmio_trace_record is allowed.
+ * - is_enabled() guarantees that mmio_trace_{rw,mapping} are allowed.
  * - pre/post callbacks assume the effect of is_enabled() being true.
  */
 
@@ -97,44 +90,6 @@ static bool is_enabled(void)
 	return atomic_read(&mmiotrace_enabled);
 }
 
-#if 0 /* XXX: needs rewrite */
-/*
- * Write callback for the debugfs entry:
- * Read a marker and write it to the mmio trace log
- */
-static ssize_t write_marker(struct file *file, const char __user *buffer,
-						size_t count, loff_t *ppos)
-{
-	char *event = NULL;
-	struct mm_io_header *headp;
-	ssize_t len = (count > 65535) ? 65535 : count;
-
-	event = kzalloc(sizeof(*headp) + len, GFP_KERNEL);
-	if (!event)
-		return -ENOMEM;
-
-	headp = (struct mm_io_header *)event;
-	headp->type = MMIO_MAGIC | (MMIO_MARKER << MMIO_OPCODE_SHIFT);
-	headp->data_len = len;
-
-	if (copy_from_user(event + sizeof(*headp), buffer, len)) {
-		kfree(event);
-		return -EFAULT;
-	}
-
-	spin_lock_irq(&trace_lock);
-#if 0 /* XXX: convert this to use tracing */
-	if (is_enabled())
-		relay_write(chan, event, sizeof(*headp) + len);
-	else
-#endif
-		len = -EINVAL;
-	spin_unlock_irq(&trace_lock);
-	kfree(event);
-	return len;
-}
-#endif
-
 static void print_pte(unsigned long address)
 {
 	unsigned int level;
@@ -307,8 +262,10 @@ static void ioremap_trace_core(resource_size_t offset, unsigned long size,
 	map.map_id = trace->id;
 
 	spin_lock_irq(&trace_lock);
-	if (!is_enabled())
+	if (!is_enabled()) {
+		kfree(trace);
 		goto not_enabled;
+	}
 
 	mmio_trace_mapping(&map);
 	list_add_tail(&trace->list, &trace_list);
@@ -377,6 +334,23 @@ void mmiotrace_iounmap(volatile void __iomem *addr)
 		iounmap_trace_core(addr);
 }
 
+int mmiotrace_printk(const char *fmt, ...)
+{
+	int ret = 0;
+	va_list args;
+	unsigned long flags;
+	va_start(args, fmt);
+
+	spin_lock_irqsave(&trace_lock, flags);
+	if (is_enabled())
+		ret = mmio_trace_printk(fmt, args);
+	spin_unlock_irqrestore(&trace_lock, flags);
+
+	va_end(args);
+	return ret;
+}
+EXPORT_SYMBOL(mmiotrace_printk);
+
 static void clear_trace_list(void)
 {
 	struct remap_trace *trace;
@@ -462,26 +436,12 @@ static void leave_uniprocessor(void)
 }
 #endif
 
-#if 0 /* XXX: out of order */
-static struct file_operations fops_marker = {
-	.owner =	THIS_MODULE,
-	.write =	write_marker
-};
-#endif
-
 void enable_mmiotrace(void)
 {
 	mutex_lock(&mmiotrace_mutex);
 	if (is_enabled())
 		goto out;
 
-#if 0 /* XXX: tracing does not support text entries */
-	marker_file = debugfs_create_file("marker", 0660, dir, NULL,
-								&fops_marker);
-	if (!marker_file)
-		pr_err(NAME "marker file creation failed.\n");
-#endif
-
 	if (nommiotrace)
 		pr_info(NAME "MMIO tracing disabled.\n");
 	enter_uniprocessor();
@@ -506,11 +466,6 @@ void disable_mmiotrace(void)
 
 	clear_trace_list(); /* guarantees: no more kmmio callbacks */
 	leave_uniprocessor();
-	if (marker_file) {
-		debugfs_remove(marker_file);
-		marker_file = NULL;
-	}
-
 	pr_info(NAME "disabled.\n");
 out:
 	mutex_unlock(&mmiotrace_mutex);
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
new file mode 100644
index 0000000..847c164
--- /dev/null
+++ b/arch/x86/mm/numa_32.c
@@ -0,0 +1,444 @@
+/*
+ * Written by: Patricia Gaughen <gone@us.ibm.com>, IBM Corporation
+ * August 2002: added remote node KVA remap - Martin J. Bligh 
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.          
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/highmem.h>
+#include <linux/initrd.h>
+#include <linux/nodemask.h>
+#include <linux/module.h>
+#include <linux/kexec.h>
+#include <linux/pfn.h>
+#include <linux/swap.h>
+#include <linux/acpi.h>
+
+#include <asm/e820.h>
+#include <asm/setup.h>
+#include <asm/mmzone.h>
+#include <asm/bios_ebda.h>
+#include <asm/proto.h>
+
+struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+
+/*
+ * numa interface - we expect the numa architecture specific code to have
+ *                  populated the following initialisation.
+ *
+ * 1) node_online_map  - the map of all nodes configured (online) in the system
+ * 2) node_start_pfn   - the starting page frame number for a node
+ * 3) node_end_pfn     - the ending page fram number for a node
+ */
+unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly;
+unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
+
+
+#ifdef CONFIG_DISCONTIGMEM
+/*
+ * 4) physnode_map     - the mapping between a pfn and owning node
+ * physnode_map keeps track of the physical memory layout of a generic
+ * numa node on a 64Mb break (each element of the array will
+ * represent 64Mb of memory and will be marked by the node id.  so,
+ * if the first gig is on node 0, and the second gig is on node 1
+ * physnode_map will contain:
+ *
+ *     physnode_map[0-15] = 0;
+ *     physnode_map[16-31] = 1;
+ *     physnode_map[32- ] = -1;
+ */
+s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1};
+EXPORT_SYMBOL(physnode_map);
+
+void memory_present(int nid, unsigned long start, unsigned long end)
+{
+	unsigned long pfn;
+
+	printk(KERN_INFO "Node: %d, start_pfn: %lx, end_pfn: %lx\n",
+			nid, start, end);
+	printk(KERN_DEBUG "  Setting physnode_map array to node %d for pfns:\n", nid);
+	printk(KERN_DEBUG "  ");
+	for (pfn = start; pfn < end; pfn += PAGES_PER_ELEMENT) {
+		physnode_map[pfn / PAGES_PER_ELEMENT] = nid;
+		printk(KERN_CONT "%lx ", pfn);
+	}
+	printk(KERN_CONT "\n");
+}
+
+unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
+					      unsigned long end_pfn)
+{
+	unsigned long nr_pages = end_pfn - start_pfn;
+
+	if (!nr_pages)
+		return 0;
+
+	return (nr_pages + 1) * sizeof(struct page);
+}
+#endif
+
+extern unsigned long find_max_low_pfn(void);
+extern unsigned long highend_pfn, highstart_pfn;
+
+#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
+
+unsigned long node_remap_size[MAX_NUMNODES];
+static void *node_remap_start_vaddr[MAX_NUMNODES];
+void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
+
+static unsigned long kva_start_pfn;
+static unsigned long kva_pages;
+/*
+ * FLAT - support for basic PC memory model with discontig enabled, essentially
+ *        a single node with all available processors in it with a flat
+ *        memory map.
+ */
+int __init get_memcfg_numa_flat(void)
+{
+	printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");
+
+	node_start_pfn[0] = 0;
+	node_end_pfn[0] = max_pfn;
+	e820_register_active_regions(0, 0, max_pfn);
+	memory_present(0, 0, max_pfn);
+	node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn);
+
+        /* Indicate there is one node available. */
+	nodes_clear(node_online_map);
+	node_set_online(0);
+	return 1;
+}
+
+/*
+ * Find the highest page frame number we have available for the node
+ */
+static void __init propagate_e820_map_node(int nid)
+{
+	if (node_end_pfn[nid] > max_pfn)
+		node_end_pfn[nid] = max_pfn;
+	/*
+	 * if a user has given mem=XXXX, then we need to make sure 
+	 * that the node _starts_ before that, too, not just ends
+	 */
+	if (node_start_pfn[nid] > max_pfn)
+		node_start_pfn[nid] = max_pfn;
+	BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]);
+}
+
+/* 
+ * Allocate memory for the pg_data_t for this node via a crude pre-bootmem
+ * method.  For node zero take this from the bottom of memory, for
+ * subsequent nodes place them at node_remap_start_vaddr which contains
+ * node local data in physically node local memory.  See setup_memory()
+ * for details.
+ */
+static void __init allocate_pgdat(int nid)
+{
+	char buf[16];
+
+	if (node_has_online_mem(nid) && node_remap_start_vaddr[nid])
+		NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid];
+	else {
+		unsigned long pgdat_phys;
+		pgdat_phys = find_e820_area(min_low_pfn<<PAGE_SHIFT,
+				 max_pfn_mapped<<PAGE_SHIFT,
+				 sizeof(pg_data_t),
+				 PAGE_SIZE);
+		NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
+		memset(buf, 0, sizeof(buf));
+		sprintf(buf, "NODE_DATA %d",  nid);
+		reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf);
+	}
+	printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
+		nid, (unsigned long)NODE_DATA(nid));
+}
+
+/*
+ * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel
+ * virtual address space (KVA) is reserved and portions of nodes are mapped
+ * using it. This is to allow node-local memory to be allocated for
+ * structures that would normally require ZONE_NORMAL. The memory is
+ * allocated with alloc_remap() and callers should be prepared to allocate
+ * from the bootmem allocator instead.
+ */
+static unsigned long node_remap_start_pfn[MAX_NUMNODES];
+static void *node_remap_end_vaddr[MAX_NUMNODES];
+static void *node_remap_alloc_vaddr[MAX_NUMNODES];
+static unsigned long node_remap_offset[MAX_NUMNODES];
+
+void *alloc_remap(int nid, unsigned long size)
+{
+	void *allocation = node_remap_alloc_vaddr[nid];
+
+	size = ALIGN(size, L1_CACHE_BYTES);
+
+	if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid])
+		return 0;
+
+	node_remap_alloc_vaddr[nid] += size;
+	memset(allocation, 0, size);
+
+	return allocation;
+}
+
+static void __init remap_numa_kva(void)
+{
+	void *vaddr;
+	unsigned long pfn;
+	int node;
+
+	for_each_online_node(node) {
+		printk(KERN_DEBUG "remap_numa_kva: node %d\n", node);
+		for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) {
+			vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT);
+			printk(KERN_DEBUG "remap_numa_kva: %08lx to pfn %08lx\n",
+				(unsigned long)vaddr,
+				node_remap_start_pfn[node] + pfn);
+			set_pmd_pfn((ulong) vaddr, 
+				node_remap_start_pfn[node] + pfn, 
+				PAGE_KERNEL_LARGE);
+		}
+	}
+}
+
+static unsigned long calculate_numa_remap_pages(void)
+{
+	int nid;
+	unsigned long size, reserve_pages = 0;
+
+	for_each_online_node(nid) {
+		u64 node_kva_target;
+		u64 node_kva_final;
+
+		/*
+		 * The acpi/srat node info can show hot-add memroy zones
+		 * where memory could be added but not currently present.
+		 */
+		printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
+			nid, node_start_pfn[nid], node_end_pfn[nid]);
+		if (node_start_pfn[nid] > max_pfn)
+			continue;
+		if (!node_end_pfn[nid])
+			continue;
+		if (node_end_pfn[nid] > max_pfn)
+			node_end_pfn[nid] = max_pfn;
+
+		/* ensure the remap includes space for the pgdat. */
+		size = node_remap_size[nid] + sizeof(pg_data_t);
+
+		/* convert size to large (pmd size) pages, rounding up */
+		size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES;
+		/* now the roundup is correct, convert to PAGE_SIZE pages */
+		size = size * PTRS_PER_PTE;
+
+		node_kva_target = round_down(node_end_pfn[nid] - size,
+						 PTRS_PER_PTE);
+		node_kva_target <<= PAGE_SHIFT;
+		do {
+			node_kva_final = find_e820_area(node_kva_target,
+					((u64)node_end_pfn[nid])<<PAGE_SHIFT,
+						((u64)size)<<PAGE_SHIFT,
+						LARGE_PAGE_BYTES);
+			node_kva_target -= LARGE_PAGE_BYTES;
+		} while (node_kva_final == -1ULL &&
+			 (node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid]));
+
+		if (node_kva_final == -1ULL)
+			panic("Can not get kva ram\n");
+
+		node_remap_size[nid] = size;
+		node_remap_offset[nid] = reserve_pages;
+		reserve_pages += size;
+		printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of"
+				  " node %d at %llx\n",
+				size, nid, node_kva_final>>PAGE_SHIFT);
+
+		/*
+		 *  prevent kva address below max_low_pfn want it on system
+		 *  with less memory later.
+		 *  layout will be: KVA address , KVA RAM
+		 *
+		 *  we are supposed to only record the one less then max_low_pfn
+		 *  but we could have some hole in high memory, and it will only
+		 *  check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide
+		 *  to use it as free.
+		 *  So reserve_early here, hope we don't run out of that array
+		 */
+		reserve_early(node_kva_final,
+			      node_kva_final+(((u64)size)<<PAGE_SHIFT),
+			      "KVA RAM");
+
+		node_remap_start_pfn[nid] = node_kva_final>>PAGE_SHIFT;
+		remove_active_range(nid, node_remap_start_pfn[nid],
+					 node_remap_start_pfn[nid] + size);
+	}
+	printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n",
+			reserve_pages);
+	return reserve_pages;
+}
+
+static void init_remap_allocator(int nid)
+{
+	node_remap_start_vaddr[nid] = pfn_to_kaddr(
+			kva_start_pfn + node_remap_offset[nid]);
+	node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] +
+		(node_remap_size[nid] * PAGE_SIZE);
+	node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] +
+		ALIGN(sizeof(pg_data_t), PAGE_SIZE);
+
+	printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid,
+		(ulong) node_remap_start_vaddr[nid],
+		(ulong) node_remap_end_vaddr[nid]);
+}
+
+void __init initmem_init(unsigned long start_pfn,
+				  unsigned long end_pfn)
+{
+	int nid;
+	long kva_target_pfn;
+
+	/*
+	 * When mapping a NUMA machine we allocate the node_mem_map arrays
+	 * from node local memory.  They are then mapped directly into KVA
+	 * between zone normal and vmalloc space.  Calculate the size of
+	 * this space and use it to adjust the boundary between ZONE_NORMAL
+	 * and ZONE_HIGHMEM.
+	 */
+
+	get_memcfg_numa();
+
+	kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE);
+
+	kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE);
+	do {
+		kva_start_pfn = find_e820_area(kva_target_pfn<<PAGE_SHIFT,
+					max_low_pfn<<PAGE_SHIFT,
+					kva_pages<<PAGE_SHIFT,
+					PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT;
+		kva_target_pfn -= PTRS_PER_PTE;
+	} while (kva_start_pfn == -1UL && kva_target_pfn > min_low_pfn);
+
+	if (kva_start_pfn == -1UL)
+		panic("Can not get kva space\n");
+
+	printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n",
+		kva_start_pfn, max_low_pfn);
+	printk(KERN_INFO "max_pfn = %lx\n", max_pfn);
+
+	/* avoid clash with initrd */
+	reserve_early(kva_start_pfn<<PAGE_SHIFT,
+		      (kva_start_pfn + kva_pages)<<PAGE_SHIFT,
+		     "KVA PG");
+#ifdef CONFIG_HIGHMEM
+	highstart_pfn = highend_pfn = max_pfn;
+	if (max_pfn > max_low_pfn)
+		highstart_pfn = max_low_pfn;
+	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+	       pages_to_mb(highend_pfn - highstart_pfn));
+	num_physpages = highend_pfn;
+	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
+#else
+	num_physpages = max_low_pfn;
+	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
+#endif
+	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+			pages_to_mb(max_low_pfn));
+	printk(KERN_DEBUG "max_low_pfn = %lx, highstart_pfn = %lx\n",
+			max_low_pfn, highstart_pfn);
+
+	printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
+			(ulong) pfn_to_kaddr(max_low_pfn));
+	for_each_online_node(nid) {
+		init_remap_allocator(nid);
+
+		allocate_pgdat(nid);
+	}
+	remap_numa_kva();
+
+	printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
+			(ulong) pfn_to_kaddr(highstart_pfn));
+	for_each_online_node(nid)
+		propagate_e820_map_node(nid);
+
+	for_each_online_node(nid)
+		memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+
+	NODE_DATA(0)->bdata = &bootmem_node_data[0];
+	setup_bootmem_allocator();
+}
+
+void __init set_highmem_pages_init(void)
+{
+#ifdef CONFIG_HIGHMEM
+	struct zone *zone;
+	int nid;
+
+	for_each_zone(zone) {
+		unsigned long zone_start_pfn, zone_end_pfn;
+
+		if (!is_highmem(zone))
+			continue;
+
+		zone_start_pfn = zone->zone_start_pfn;
+		zone_end_pfn = zone_start_pfn + zone->spanned_pages;
+
+		nid = zone_to_nid(zone);
+		printk(KERN_INFO "Initializing %s for node %d (%08lx:%08lx)\n",
+				zone->name, nid, zone_start_pfn, zone_end_pfn);
+
+		add_highpages_with_active_regions(nid, zone_start_pfn,
+				 zone_end_pfn);
+	}
+	totalram_pages += totalhigh_pages;
+#endif
+}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static int paddr_to_nid(u64 addr)
+{
+	int nid;
+	unsigned long pfn = PFN_DOWN(addr);
+
+	for_each_node(nid)
+		if (node_start_pfn[nid] <= pfn &&
+		    pfn < node_end_pfn[nid])
+			return nid;
+
+	return -1;
+}
+
+/*
+ * This function is used to ask node id BEFORE memmap and mem_section's
+ * initialization (pfn_to_nid() can't be used yet).
+ * If _PXM is not defined on ACPI's DSDT, node id must be found by this.
+ */
+int memory_add_physaddr_to_nid(u64 addr)
+{
+	int nid = paddr_to_nid(addr);
+	return (nid >= 0) ? nid : 0;
+}
+
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
+
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index a4dd793..cebcbf1 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -79,7 +79,7 @@ static int __init allocate_cachealigned_memnodemap(void)
 		return 0;
 
 	addr = 0x8000;
-	nodemap_size = round_up(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
+	nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
 	nodemap_addr = find_e820_area(addr, max_pfn<<PAGE_SHIFT,
 				      nodemap_size, L1_CACHE_BYTES);
 	if (nodemap_addr == -1UL) {
@@ -176,10 +176,10 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 	unsigned long start_pfn, last_pfn, bootmap_pages, bootmap_size;
 	unsigned long bootmap_start, nodedata_phys;
 	void *bootmap;
-	const int pgdat_size = round_up(sizeof(pg_data_t), PAGE_SIZE);
+	const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
 	int nid;
 
-	start = round_up(start, ZONE_ALIGN);
+	start = roundup(start, ZONE_ALIGN);
 
 	printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid,
 	       start, end);
@@ -210,9 +210,9 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 	bootmap_pages = bootmem_bootmap_pages(last_pfn - start_pfn);
 	nid = phys_to_nid(nodedata_phys);
 	if (nid == nodeid)
-		bootmap_start = round_up(nodedata_phys + pgdat_size, PAGE_SIZE);
+		bootmap_start = roundup(nodedata_phys + pgdat_size, PAGE_SIZE);
 	else
-		bootmap_start = round_up(start, PAGE_SIZE);
+		bootmap_start = roundup(start, PAGE_SIZE);
 	/*
 	 * SMP_CACHE_BYTES could be enough, but init_bootmem_node like
 	 * to use that to align to PAGE_SIZE
diff --git a/arch/x86/mm/pageattr-test.c b/arch/x86/mm/pageattr-test.c
index d4aa503..e1d1069 100644
--- a/arch/x86/mm/pageattr-test.c
+++ b/arch/x86/mm/pageattr-test.c
@@ -32,7 +32,7 @@ enum {
 	GPS			= (1<<30)
 };
 
-#define PAGE_TESTBIT	__pgprot(_PAGE_UNUSED1)
+#define PAGE_CPA_TEST	__pgprot(_PAGE_CPA_TEST)
 
 static int pte_testbit(pte_t pte)
 {
@@ -118,6 +118,7 @@ static int pageattr_test(void)
 	unsigned int level;
 	int i, k;
 	int err;
+	unsigned long test_addr;
 
 	if (print)
 		printk(KERN_INFO "CPA self-test:\n");
@@ -172,7 +173,8 @@ static int pageattr_test(void)
 			continue;
 		}
 
-		err = change_page_attr_set(addr[i], len[i], PAGE_TESTBIT);
+		test_addr = addr[i];
+		err = change_page_attr_set(&test_addr, len[i], PAGE_CPA_TEST, 0);
 		if (err < 0) {
 			printk(KERN_ERR "CPA %d failed %d\n", i, err);
 			failed++;
@@ -204,7 +206,8 @@ static int pageattr_test(void)
 			failed++;
 			continue;
 		}
-		err = change_page_attr_clear(addr[i], len[i], PAGE_TESTBIT);
+		test_addr = addr[i];
+		err = change_page_attr_clear(&test_addr, len[i], PAGE_CPA_TEST, 0);
 		if (err < 0) {
 			printk(KERN_ERR "CPA reverting failed: %d\n", err);
 			failed++;
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 43e2f84..f1dc1b7 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -25,15 +25,27 @@
  * The current flushing context - we pass it instead of 5 arguments:
  */
 struct cpa_data {
-	unsigned long	vaddr;
+	unsigned long	*vaddr;
 	pgprot_t	mask_set;
 	pgprot_t	mask_clr;
 	int		numpages;
-	int		flushtlb;
+	int		flags;
 	unsigned long	pfn;
 	unsigned	force_split : 1;
+	int		curpage;
 };
 
+/*
+ * Serialize cpa() (for !DEBUG_PAGEALLOC which uses large identity mappings)
+ * using cpa_lock. So that we don't allow any other cpu, with stale large tlb
+ * entries change the page attribute in parallel to some other cpu
+ * splitting a large page entry along with changing the attribute.
+ */
+static DEFINE_SPINLOCK(cpa_lock);
+
+#define CPA_FLUSHTLB 1
+#define CPA_ARRAY 2
+
 #ifdef CONFIG_PROC_FS
 static unsigned long direct_pages_count[PG_LEVEL_NUM];
 
@@ -53,23 +65,22 @@ static void split_page_count(int level)
 	direct_pages_count[level - 1] += PTRS_PER_PTE;
 }
 
-int arch_report_meminfo(char *page)
+void arch_report_meminfo(struct seq_file *m)
 {
-	int n = sprintf(page, "DirectMap4k:  %8lu kB\n",
+	seq_printf(m, "DirectMap4k:  %8lu kB\n",
 			direct_pages_count[PG_LEVEL_4K] << 2);
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
-	n += sprintf(page + n, "DirectMap2M:  %8lu kB\n",
+	seq_printf(m, "DirectMap2M:  %8lu kB\n",
 			direct_pages_count[PG_LEVEL_2M] << 11);
 #else
-	n += sprintf(page + n, "DirectMap4M:  %8lu kB\n",
+	seq_printf(m, "DirectMap4M:  %8lu kB\n",
 			direct_pages_count[PG_LEVEL_2M] << 12);
 #endif
 #ifdef CONFIG_X86_64
 	if (direct_gbpages)
-		n += sprintf(page + n, "DirectMap1G:  %8lu kB\n",
+		seq_printf(m, "DirectMap1G:  %8lu kB\n",
 			direct_pages_count[PG_LEVEL_1G] << 20);
 #endif
-	return n;
 }
 #else
 static inline void split_page_count(int level) { }
@@ -84,7 +95,7 @@ static inline unsigned long highmap_start_pfn(void)
 
 static inline unsigned long highmap_end_pfn(void)
 {
-	return __pa(round_up((unsigned long)_end, PMD_SIZE)) >> PAGE_SHIFT;
+	return __pa(roundup((unsigned long)_end, PMD_SIZE)) >> PAGE_SHIFT;
 }
 
 #endif
@@ -190,6 +201,41 @@ static void cpa_flush_range(unsigned long start, int numpages, int cache)
 	}
 }
 
+static void cpa_flush_array(unsigned long *start, int numpages, int cache)
+{
+	unsigned int i, level;
+	unsigned long *addr;
+
+	BUG_ON(irqs_disabled());
+
+	on_each_cpu(__cpa_flush_range, NULL, 1);
+
+	if (!cache)
+		return;
+
+	/* 4M threshold */
+	if (numpages >= 1024) {
+		if (boot_cpu_data.x86_model >= 4)
+			wbinvd();
+		return;
+	}
+	/*
+	 * We only need to flush on one CPU,
+	 * clflush is a MESI-coherent instruction that
+	 * will cause all other CPUs to flush the same
+	 * cachelines:
+	 */
+	for (i = 0, addr = start; i < numpages; i++, addr++) {
+		pte_t *pte = lookup_address(*addr, &level);
+
+		/*
+		 * Only flush present addresses:
+		 */
+		if (pte && (pte_val(*pte) & _PAGE_PRESENT))
+			clflush_cache_range((void *) *addr, PAGE_SIZE);
+	}
+}
+
 /*
  * Certain areas of memory on x86 require very specific protection flags,
  * for example the BIOS area or kernel text. Callers don't always get this
@@ -398,7 +444,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 		 */
 		new_pte = pfn_pte(pte_pfn(old_pte), canon_pgprot(new_prot));
 		__set_pmd_pte(kpte, address, new_pte);
-		cpa->flushtlb = 1;
+		cpa->flags |= CPA_FLUSHTLB;
 		do_split = 0;
 	}
 
@@ -408,84 +454,6 @@ out_unlock:
 	return do_split;
 }
 
-static LIST_HEAD(page_pool);
-static unsigned long pool_size, pool_pages, pool_low;
-static unsigned long pool_used, pool_failed;
-
-static void cpa_fill_pool(struct page **ret)
-{
-	gfp_t gfp = GFP_KERNEL;
-	unsigned long flags;
-	struct page *p;
-
-	/*
-	 * Avoid recursion (on debug-pagealloc) and also signal
-	 * our priority to get to these pagetables:
-	 */
-	if (current->flags & PF_MEMALLOC)
-		return;
-	current->flags |= PF_MEMALLOC;
-
-	/*
-	 * Allocate atomically from atomic contexts:
-	 */
-	if (in_atomic() || irqs_disabled() || debug_pagealloc)
-		gfp =  GFP_ATOMIC | __GFP_NORETRY | __GFP_NOWARN;
-
-	while (pool_pages < pool_size || (ret && !*ret)) {
-		p = alloc_pages(gfp, 0);
-		if (!p) {
-			pool_failed++;
-			break;
-		}
-		/*
-		 * If the call site needs a page right now, provide it:
-		 */
-		if (ret && !*ret) {
-			*ret = p;
-			continue;
-		}
-		spin_lock_irqsave(&pgd_lock, flags);
-		list_add(&p->lru, &page_pool);
-		pool_pages++;
-		spin_unlock_irqrestore(&pgd_lock, flags);
-	}
-
-	current->flags &= ~PF_MEMALLOC;
-}
-
-#define SHIFT_MB		(20 - PAGE_SHIFT)
-#define ROUND_MB_GB		((1 << 10) - 1)
-#define SHIFT_MB_GB		10
-#define POOL_PAGES_PER_GB	16
-
-void __init cpa_init(void)
-{
-	struct sysinfo si;
-	unsigned long gb;
-
-	si_meminfo(&si);
-	/*
-	 * Calculate the number of pool pages:
-	 *
-	 * Convert totalram (nr of pages) to MiB and round to the next
-	 * GiB. Shift MiB to Gib and multiply the result by
-	 * POOL_PAGES_PER_GB:
-	 */
-	if (debug_pagealloc) {
-		gb = ((si.totalram >> SHIFT_MB) + ROUND_MB_GB) >> SHIFT_MB_GB;
-		pool_size = POOL_PAGES_PER_GB * gb;
-	} else {
-		pool_size = 1;
-	}
-	pool_low = pool_size;
-
-	cpa_fill_pool(NULL);
-	printk(KERN_DEBUG
-	       "CPA: page pool initialized %lu of %lu pages preallocated\n",
-	       pool_pages, pool_size);
-}
-
 static int split_large_page(pte_t *kpte, unsigned long address)
 {
 	unsigned long flags, pfn, pfninc = 1;
@@ -494,28 +462,15 @@ static int split_large_page(pte_t *kpte, unsigned long address)
 	pgprot_t ref_prot;
 	struct page *base;
 
-	/*
-	 * Get a page from the pool. The pool list is protected by the
-	 * pgd_lock, which we have to take anyway for the split
-	 * operation:
-	 */
-	spin_lock_irqsave(&pgd_lock, flags);
-	if (list_empty(&page_pool)) {
-		spin_unlock_irqrestore(&pgd_lock, flags);
-		base = NULL;
-		cpa_fill_pool(&base);
-		if (!base)
-			return -ENOMEM;
-		spin_lock_irqsave(&pgd_lock, flags);
-	} else {
-		base = list_first_entry(&page_pool, struct page, lru);
-		list_del(&base->lru);
-		pool_pages--;
-
-		if (pool_pages < pool_low)
-			pool_low = pool_pages;
-	}
+	if (!debug_pagealloc)
+		spin_unlock(&cpa_lock);
+	base = alloc_pages(GFP_KERNEL, 0);
+	if (!debug_pagealloc)
+		spin_lock(&cpa_lock);
+	if (!base)
+		return -ENOMEM;
 
+	spin_lock_irqsave(&pgd_lock, flags);
 	/*
 	 * Check for races, another CPU might have split this page
 	 * up for us already:
@@ -572,11 +527,8 @@ out_unlock:
 	 * If we dropped out via the lookup_address check under
 	 * pgd_lock then stick the page back into the pool:
 	 */
-	if (base) {
-		list_add(&base->lru, &page_pool);
-		pool_pages++;
-	} else
-		pool_used++;
+	if (base)
+		__free_page(base);
 	spin_unlock_irqrestore(&pgd_lock, flags);
 
 	return 0;
@@ -584,11 +536,16 @@ out_unlock:
 
 static int __change_page_attr(struct cpa_data *cpa, int primary)
 {
-	unsigned long address = cpa->vaddr;
+	unsigned long address;
 	int do_split, err;
 	unsigned int level;
 	pte_t *kpte, old_pte;
 
+	if (cpa->flags & CPA_ARRAY)
+		address = cpa->vaddr[cpa->curpage];
+	else
+		address = *cpa->vaddr;
+
 repeat:
 	kpte = lookup_address(address, &level);
 	if (!kpte)
@@ -600,7 +557,7 @@ repeat:
 			return 0;
 		WARN(1, KERN_WARNING "CPA: called for zero pte. "
 		       "vaddr = %lx cpa->vaddr = %lx\n", address,
-		       cpa->vaddr);
+		       *cpa->vaddr);
 		return -EINVAL;
 	}
 
@@ -626,7 +583,7 @@ repeat:
 		 */
 		if (pte_val(old_pte) != pte_val(new_pte)) {
 			set_pte_atomic(kpte, new_pte);
-			cpa->flushtlb = 1;
+			cpa->flags |= CPA_FLUSHTLB;
 		}
 		cpa->numpages = 1;
 		return 0;
@@ -650,7 +607,25 @@ repeat:
 	 */
 	err = split_large_page(kpte, address);
 	if (!err) {
-		cpa->flushtlb = 1;
+		/*
+	 	 * Do a global flush tlb after splitting the large page
+	 	 * and before we do the actual change page attribute in the PTE.
+	 	 *
+	 	 * With out this, we violate the TLB application note, that says
+	 	 * "The TLBs may contain both ordinary and large-page
+		 *  translations for a 4-KByte range of linear addresses. This
+		 *  may occur if software modifies the paging structures so that
+		 *  the page size used for the address range changes. If the two
+		 *  translations differ with respect to page frame or attributes
+		 *  (e.g., permissions), processor behavior is undefined and may
+		 *  be implementation-specific."
+	 	 *
+	 	 * We do this global tlb flush inside the cpa_lock, so that we
+		 * don't allow any other cpu, with stale tlb entries change the
+		 * page attribute in parallel, that also falls into the
+		 * just split large page entry.
+	 	 */
+		flush_tlb_all();
 		goto repeat;
 	}
 
@@ -663,6 +638,7 @@ static int cpa_process_alias(struct cpa_data *cpa)
 {
 	struct cpa_data alias_cpa;
 	int ret = 0;
+	unsigned long temp_cpa_vaddr, vaddr;
 
 	if (cpa->pfn >= max_pfn_mapped)
 		return 0;
@@ -675,16 +651,24 @@ static int cpa_process_alias(struct cpa_data *cpa)
 	 * No need to redo, when the primary call touched the direct
 	 * mapping already:
 	 */
-	if (!(within(cpa->vaddr, PAGE_OFFSET,
+	if (cpa->flags & CPA_ARRAY)
+		vaddr = cpa->vaddr[cpa->curpage];
+	else
+		vaddr = *cpa->vaddr;
+
+	if (!(within(vaddr, PAGE_OFFSET,
 		    PAGE_OFFSET + (max_low_pfn_mapped << PAGE_SHIFT))
 #ifdef CONFIG_X86_64
-		|| within(cpa->vaddr, PAGE_OFFSET + (1UL<<32),
+		|| within(vaddr, PAGE_OFFSET + (1UL<<32),
 		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))
 #endif
 	)) {
 
 		alias_cpa = *cpa;
-		alias_cpa.vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
+		temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
+		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.flags &= ~CPA_ARRAY;
+
 
 		ret = __change_page_attr_set_clr(&alias_cpa, 0);
 	}
@@ -696,7 +680,7 @@ static int cpa_process_alias(struct cpa_data *cpa)
 	 * No need to redo, when the primary call touched the high
 	 * mapping already:
 	 */
-	if (within(cpa->vaddr, (unsigned long) _text, (unsigned long) _end))
+	if (within(vaddr, (unsigned long) _text, (unsigned long) _end))
 		return 0;
 
 	/*
@@ -707,8 +691,9 @@ static int cpa_process_alias(struct cpa_data *cpa)
 		return 0;
 
 	alias_cpa = *cpa;
-	alias_cpa.vaddr =
-		(cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
+	temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
+	alias_cpa.vaddr = &temp_cpa_vaddr;
+	alias_cpa.flags &= ~CPA_ARRAY;
 
 	/*
 	 * The high mapping range is imprecise, so ignore the return value.
@@ -728,8 +713,15 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
 		 * preservation check.
 		 */
 		cpa->numpages = numpages;
+		/* for array changes, we can't use large page */
+		if (cpa->flags & CPA_ARRAY)
+			cpa->numpages = 1;
 
+		if (!debug_pagealloc)
+			spin_lock(&cpa_lock);
 		ret = __change_page_attr(cpa, checkalias);
+		if (!debug_pagealloc)
+			spin_unlock(&cpa_lock);
 		if (ret)
 			return ret;
 
@@ -746,7 +738,11 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
 		 */
 		BUG_ON(cpa->numpages > numpages);
 		numpages -= cpa->numpages;
-		cpa->vaddr += cpa->numpages * PAGE_SIZE;
+		if (cpa->flags & CPA_ARRAY)
+			cpa->curpage++;
+		else
+			*cpa->vaddr += cpa->numpages * PAGE_SIZE;
+
 	}
 	return 0;
 }
@@ -757,9 +753,9 @@ static inline int cache_attr(pgprot_t attr)
 		(_PAGE_PAT | _PAGE_PAT_LARGE | _PAGE_PWT | _PAGE_PCD);
 }
 
-static int change_page_attr_set_clr(unsigned long addr, int numpages,
+static int change_page_attr_set_clr(unsigned long *addr, int numpages,
 				    pgprot_t mask_set, pgprot_t mask_clr,
-				    int force_split)
+				    int force_split, int array)
 {
 	struct cpa_data cpa;
 	int ret, cache, checkalias;
@@ -774,21 +770,40 @@ static int change_page_attr_set_clr(unsigned long addr, int numpages,
 		return 0;
 
 	/* Ensure we are PAGE_SIZE aligned */
-	if (addr & ~PAGE_MASK) {
-		addr &= PAGE_MASK;
-		/*
-		 * People should not be passing in unaligned addresses:
-		 */
-		WARN_ON_ONCE(1);
+	if (!array) {
+		if (*addr & ~PAGE_MASK) {
+			*addr &= PAGE_MASK;
+			/*
+			 * People should not be passing in unaligned addresses:
+			 */
+			WARN_ON_ONCE(1);
+		}
+	} else {
+		int i;
+		for (i = 0; i < numpages; i++) {
+			if (addr[i] & ~PAGE_MASK) {
+				addr[i] &= PAGE_MASK;
+				WARN_ON_ONCE(1);
+			}
+		}
 	}
 
+	/* Must avoid aliasing mappings in the highmem code */
+	kmap_flush_unused();
+
+	vm_unmap_aliases();
+
 	cpa.vaddr = addr;
 	cpa.numpages = numpages;
 	cpa.mask_set = mask_set;
 	cpa.mask_clr = mask_clr;
-	cpa.flushtlb = 0;
+	cpa.flags = 0;
+	cpa.curpage = 0;
 	cpa.force_split = force_split;
 
+	if (array)
+		cpa.flags |= CPA_ARRAY;
+
 	/* No alias checking for _NX bit modifications */
 	checkalias = (pgprot_val(mask_set) | pgprot_val(mask_clr)) != _PAGE_NX;
 
@@ -797,7 +812,7 @@ static int change_page_attr_set_clr(unsigned long addr, int numpages,
 	/*
 	 * Check whether we really changed something:
 	 */
-	if (!cpa.flushtlb)
+	if (!(cpa.flags & CPA_FLUSHTLB))
 		goto out;
 
 	/*
@@ -812,27 +827,30 @@ static int change_page_attr_set_clr(unsigned long addr, int numpages,
 	 * error case we fall back to cpa_flush_all (which uses
 	 * wbindv):
 	 */
-	if (!ret && cpu_has_clflush)
-		cpa_flush_range(addr, numpages, cache);
-	else
+	if (!ret && cpu_has_clflush) {
+		if (cpa.flags & CPA_ARRAY)
+			cpa_flush_array(addr, numpages, cache);
+		else
+			cpa_flush_range(*addr, numpages, cache);
+	} else
 		cpa_flush_all(cache);
 
 out:
-	cpa_fill_pool(NULL);
-
 	return ret;
 }
 
-static inline int change_page_attr_set(unsigned long addr, int numpages,
-				       pgprot_t mask)
+static inline int change_page_attr_set(unsigned long *addr, int numpages,
+				       pgprot_t mask, int array)
 {
-	return change_page_attr_set_clr(addr, numpages, mask, __pgprot(0), 0);
+	return change_page_attr_set_clr(addr, numpages, mask, __pgprot(0), 0,
+		array);
 }
 
-static inline int change_page_attr_clear(unsigned long addr, int numpages,
-					 pgprot_t mask)
+static inline int change_page_attr_clear(unsigned long *addr, int numpages,
+					 pgprot_t mask, int array)
 {
-	return change_page_attr_set_clr(addr, numpages, __pgprot(0), mask, 0);
+	return change_page_attr_set_clr(addr, numpages, __pgprot(0), mask, 0,
+		array);
 }
 
 int _set_memory_uc(unsigned long addr, int numpages)
@@ -840,8 +858,8 @@ int _set_memory_uc(unsigned long addr, int numpages)
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
-	return change_page_attr_set(addr, numpages,
-				    __pgprot(_PAGE_CACHE_UC_MINUS));
+	return change_page_attr_set(&addr, numpages,
+				    __pgprot(_PAGE_CACHE_UC_MINUS), 0);
 }
 
 int set_memory_uc(unsigned long addr, int numpages)
@@ -857,10 +875,48 @@ int set_memory_uc(unsigned long addr, int numpages)
 }
 EXPORT_SYMBOL(set_memory_uc);
 
+int set_memory_array_uc(unsigned long *addr, int addrinarray)
+{
+	unsigned long start;
+	unsigned long end;
+	int i;
+	/*
+	 * for now UC MINUS. see comments in ioremap_nocache()
+	 */
+	for (i = 0; i < addrinarray; i++) {
+		start = __pa(addr[i]);
+		for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
+			if (end != __pa(addr[i + 1]))
+				break;
+			i++;
+		}
+		if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
+			goto out;
+	}
+
+	return change_page_attr_set(addr, addrinarray,
+				    __pgprot(_PAGE_CACHE_UC_MINUS), 1);
+out:
+	for (i = 0; i < addrinarray; i++) {
+		unsigned long tmp = __pa(addr[i]);
+
+		if (tmp == start)
+			break;
+		for (end = tmp + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
+			if (end != __pa(addr[i + 1]))
+				break;
+			i++;
+		}
+		free_memtype(tmp, end);
+	}
+	return -EINVAL;
+}
+EXPORT_SYMBOL(set_memory_array_uc);
+
 int _set_memory_wc(unsigned long addr, int numpages)
 {
-	return change_page_attr_set(addr, numpages,
-				    __pgprot(_PAGE_CACHE_WC));
+	return change_page_attr_set(&addr, numpages,
+				    __pgprot(_PAGE_CACHE_WC), 0);
 }
 
 int set_memory_wc(unsigned long addr, int numpages)
@@ -878,8 +934,8 @@ EXPORT_SYMBOL(set_memory_wc);
 
 int _set_memory_wb(unsigned long addr, int numpages)
 {
-	return change_page_attr_clear(addr, numpages,
-				      __pgprot(_PAGE_CACHE_MASK));
+	return change_page_attr_clear(&addr, numpages,
+				      __pgprot(_PAGE_CACHE_MASK), 0);
 }
 
 int set_memory_wb(unsigned long addr, int numpages)
@@ -890,37 +946,59 @@ int set_memory_wb(unsigned long addr, int numpages)
 }
 EXPORT_SYMBOL(set_memory_wb);
 
+int set_memory_array_wb(unsigned long *addr, int addrinarray)
+{
+	int i;
+
+	for (i = 0; i < addrinarray; i++) {
+		unsigned long start = __pa(addr[i]);
+		unsigned long end;
+
+		for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
+			if (end != __pa(addr[i + 1]))
+				break;
+			i++;
+		}
+		free_memtype(start, end);
+	}
+	return change_page_attr_clear(addr, addrinarray,
+				      __pgprot(_PAGE_CACHE_MASK), 1);
+}
+EXPORT_SYMBOL(set_memory_array_wb);
+
 int set_memory_x(unsigned long addr, int numpages)
 {
-	return change_page_attr_clear(addr, numpages, __pgprot(_PAGE_NX));
+	return change_page_attr_clear(&addr, numpages, __pgprot(_PAGE_NX), 0);
 }
 EXPORT_SYMBOL(set_memory_x);
 
 int set_memory_nx(unsigned long addr, int numpages)
 {
-	return change_page_attr_set(addr, numpages, __pgprot(_PAGE_NX));
+	return change_page_attr_set(&addr, numpages, __pgprot(_PAGE_NX), 0);
 }
 EXPORT_SYMBOL(set_memory_nx);
 
 int set_memory_ro(unsigned long addr, int numpages)
 {
-	return change_page_attr_clear(addr, numpages, __pgprot(_PAGE_RW));
+	return change_page_attr_clear(&addr, numpages, __pgprot(_PAGE_RW), 0);
 }
+EXPORT_SYMBOL_GPL(set_memory_ro);
 
 int set_memory_rw(unsigned long addr, int numpages)
 {
-	return change_page_attr_set(addr, numpages, __pgprot(_PAGE_RW));
+	return change_page_attr_set(&addr, numpages, __pgprot(_PAGE_RW), 0);
 }
+EXPORT_SYMBOL_GPL(set_memory_rw);
 
 int set_memory_np(unsigned long addr, int numpages)
 {
-	return change_page_attr_clear(addr, numpages, __pgprot(_PAGE_PRESENT));
+	return change_page_attr_clear(&addr, numpages, __pgprot(_PAGE_PRESENT), 0);
 }
 
 int set_memory_4k(unsigned long addr, int numpages)
 {
-	return change_page_attr_set_clr(addr, numpages, __pgprot(0),
-					__pgprot(0), 1);
+	return change_page_attr_set_clr(&addr, numpages, __pgprot(0),
+					__pgprot(0), 1, 0);
 }
 
 int set_pages_uc(struct page *page, int numpages)
@@ -973,22 +1051,38 @@ int set_pages_rw(struct page *page, int numpages)
 
 static int __set_pages_p(struct page *page, int numpages)
 {
-	struct cpa_data cpa = { .vaddr = (unsigned long) page_address(page),
+	unsigned long tempaddr = (unsigned long) page_address(page);
+	struct cpa_data cpa = { .vaddr = &tempaddr,
 				.numpages = numpages,
 				.mask_set = __pgprot(_PAGE_PRESENT | _PAGE_RW),
-				.mask_clr = __pgprot(0)};
+				.mask_clr = __pgprot(0),
+				.flags = 0};
 
-	return __change_page_attr_set_clr(&cpa, 1);
+	/*
+	 * No alias checking needed for setting present flag. otherwise,
+	 * we may need to break large pages for 64-bit kernel text
+	 * mappings (this adds to complexity if we want to do this from
+	 * atomic context especially). Let's keep it simple!
+	 */
+	return __change_page_attr_set_clr(&cpa, 0);
 }
 
 static int __set_pages_np(struct page *page, int numpages)
 {
-	struct cpa_data cpa = { .vaddr = (unsigned long) page_address(page),
+	unsigned long tempaddr = (unsigned long) page_address(page);
+	struct cpa_data cpa = { .vaddr = &tempaddr,
 				.numpages = numpages,
 				.mask_set = __pgprot(0),
-				.mask_clr = __pgprot(_PAGE_PRESENT | _PAGE_RW)};
+				.mask_clr = __pgprot(_PAGE_PRESENT | _PAGE_RW),
+				.flags = 0};
 
-	return __change_page_attr_set_clr(&cpa, 1);
+	/*
+	 * No alias checking needed for setting not present flag. otherwise,
+	 * we may need to break large pages for 64-bit kernel text
+	 * mappings (this adds to complexity if we want to do this from
+	 * atomic context especially). Let's keep it simple!
+	 */
+	return __change_page_attr_set_clr(&cpa, 0);
 }
 
 void kernel_map_pages(struct page *page, int numpages, int enable)
@@ -1008,11 +1102,8 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
 
 	/*
 	 * The return value is ignored as the calls cannot fail.
-	 * Large pages are kept enabled at boot time, and are
-	 * split up quickly with DEBUG_PAGEALLOC. If a splitup
-	 * fails here (due to temporary memory shortage) no damage
-	 * is done because we just keep the largepage intact up
-	 * to the next attempt when it will likely be split up:
+	 * Large pages for identity mappings are not used at boot time
+	 * and hence no memory allocations during large page split.
 	 */
 	if (enable)
 		__set_pages_p(page, numpages);
@@ -1024,53 +1115,8 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
 	 * but that can deadlock->flush only current cpu:
 	 */
 	__flush_tlb_all();
-
-	/*
-	 * Try to refill the page pool here. We can do this only after
-	 * the tlb flush.
-	 */
-	cpa_fill_pool(NULL);
 }
 
-#ifdef CONFIG_DEBUG_FS
-static int dpa_show(struct seq_file *m, void *v)
-{
-	seq_puts(m, "DEBUG_PAGEALLOC\n");
-	seq_printf(m, "pool_size     : %lu\n", pool_size);
-	seq_printf(m, "pool_pages    : %lu\n", pool_pages);
-	seq_printf(m, "pool_low      : %lu\n", pool_low);
-	seq_printf(m, "pool_used     : %lu\n", pool_used);
-	seq_printf(m, "pool_failed   : %lu\n", pool_failed);
-
-	return 0;
-}
-
-static int dpa_open(struct inode *inode, struct file *filp)
-{
-	return single_open(filp, dpa_show, NULL);
-}
-
-static const struct file_operations dpa_fops = {
-	.open		= dpa_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init debug_pagealloc_proc_init(void)
-{
-	struct dentry *de;
-
-	de = debugfs_create_file("debug_pagealloc", 0600, NULL, NULL,
-				 &dpa_fops);
-	if (!de)
-		return -ENOMEM;
-
-	return 0;
-}
-__initcall(debug_pagealloc_proc_init);
-#endif
-
 #ifdef CONFIG_HIBERNATION
 
 bool kernel_page_present(struct page *page)
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 2a50e0f..738fd0f2 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -7,24 +7,24 @@
  * Loosely based on earlier PAT patchset from Eric Biederman and Andi Kleen.
  */
 
-#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/bootmem.h>
+#include <linux/debugfs.h>
 #include <linux/kernel.h>
 #include <linux/gfp.h>
+#include <linux/mm.h>
 #include <linux/fs.h>
-#include <linux/bootmem.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
 
-#include <asm/msr.h>
-#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
 #include <asm/processor.h>
-#include <asm/page.h>
+#include <asm/tlbflush.h>
 #include <asm/pgtable.h>
-#include <asm/pat.h>
-#include <asm/e820.h>
-#include <asm/cacheflush.h>
 #include <asm/fcntl.h>
+#include <asm/e820.h>
 #include <asm/mtrr.h>
+#include <asm/page.h>
+#include <asm/msr.h>
+#include <asm/pat.h>
 #include <asm/io.h>
 
 #ifdef CONFIG_X86_PAT
@@ -46,6 +46,7 @@ early_param("nopat", nopat);
 
 
 static int debug_enable;
+
 static int __init pat_debug_setup(char *str)
 {
 	debug_enable = 1;
@@ -145,14 +146,14 @@ static char *cattr_name(unsigned long flags)
  */
 
 struct memtype {
-	u64 start;
-	u64 end;
-	unsigned long type;
-	struct list_head nd;
+	u64			start;
+	u64			end;
+	unsigned long		type;
+	struct list_head	nd;
 };
 
 static LIST_HEAD(memtype_list);
-static DEFINE_SPINLOCK(memtype_lock); 	/* protects memtype list */
+static DEFINE_SPINLOCK(memtype_lock);	/* protects memtype list */
 
 /*
  * Does intersection of PAT memory type and MTRR memory type and returns
@@ -180,8 +181,8 @@ static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type)
 	return req_type;
 }
 
-static int chk_conflict(struct memtype *new, struct memtype *entry,
-			unsigned long *type)
+static int
+chk_conflict(struct memtype *new, struct memtype *entry, unsigned long *type)
 {
 	if (new->type != entry->type) {
 		if (type) {
@@ -211,6 +212,66 @@ static struct memtype *cached_entry;
 static u64 cached_start;
 
 /*
+ * For RAM pages, mark the pages as non WB memory type using
+ * PageNonWB (PG_arch_1). We allow only one set_memory_uc() or
+ * set_memory_wc() on a RAM page at a time before marking it as WB again.
+ * This is ok, because only one driver will be owning the page and
+ * doing set_memory_*() calls.
+ *
+ * For now, we use PageNonWB to track that the RAM page is being mapped
+ * as non WB. In future, we will have to use one more flag
+ * (or some other mechanism in page_struct) to distinguish between
+ * UC and WC mapping.
+ */
+static int reserve_ram_pages_type(u64 start, u64 end, unsigned long req_type,
+				  unsigned long *new_type)
+{
+	struct page *page;
+	u64 pfn, end_pfn;
+
+	for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
+		page = pfn_to_page(pfn);
+		if (page_mapped(page) || PageNonWB(page))
+			goto out;
+
+		SetPageNonWB(page);
+	}
+	return 0;
+
+out:
+	end_pfn = pfn;
+	for (pfn = (start >> PAGE_SHIFT); pfn < end_pfn; ++pfn) {
+		page = pfn_to_page(pfn);
+		ClearPageNonWB(page);
+	}
+
+	return -EINVAL;
+}
+
+static int free_ram_pages_type(u64 start, u64 end)
+{
+	struct page *page;
+	u64 pfn, end_pfn;
+
+	for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
+		page = pfn_to_page(pfn);
+		if (page_mapped(page) || !PageNonWB(page))
+			goto out;
+
+		ClearPageNonWB(page);
+	}
+	return 0;
+
+out:
+	end_pfn = pfn;
+	for (pfn = (start >> PAGE_SHIFT); pfn < end_pfn; ++pfn) {
+		page = pfn_to_page(pfn);
+		SetPageNonWB(page);
+	}
+	return -EINVAL;
+}
+
+/*
  * req_type typically has one of the:
  * - _PAGE_CACHE_WB
  * - _PAGE_CACHE_WC
@@ -226,14 +287,15 @@ static u64 cached_start;
  * it will return a negative return value.
  */
 int reserve_memtype(u64 start, u64 end, unsigned long req_type,
-			unsigned long *new_type)
+		    unsigned long *new_type)
 {
 	struct memtype *new, *entry;
 	unsigned long actual_type;
 	struct list_head *where;
+	int is_range_ram;
 	int err = 0;
 
- 	BUG_ON(start >= end); /* end is exclusive */
+	BUG_ON(start >= end); /* end is exclusive */
 
 	if (!pat_enabled) {
 		/* This is identical to page table setting without PAT */
@@ -266,17 +328,24 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 			actual_type = _PAGE_CACHE_WB;
 		else
 			actual_type = _PAGE_CACHE_UC_MINUS;
-	} else
+	} else {
 		actual_type = pat_x_mtrr_type(start, end,
 					      req_type & _PAGE_CACHE_MASK);
+	}
+
+	is_range_ram = pagerange_is_ram(start, end);
+	if (is_range_ram == 1)
+		return reserve_ram_pages_type(start, end, req_type, new_type);
+	else if (is_range_ram < 0)
+		return -EINVAL;
 
 	new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
 	if (!new)
 		return -ENOMEM;
 
-	new->start = start;
-	new->end = end;
-	new->type = actual_type;
+	new->start	= start;
+	new->end	= end;
+	new->type	= actual_type;
 
 	if (new_type)
 		*new_type = actual_type;
@@ -335,6 +404,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		       start, end, cattr_name(new->type), cattr_name(req_type));
 		kfree(new);
 		spin_unlock(&memtype_lock);
+
 		return err;
 	}
 
@@ -358,6 +428,7 @@ int free_memtype(u64 start, u64 end)
 {
 	struct memtype *entry;
 	int err = -EINVAL;
+	int is_range_ram;
 
 	if (!pat_enabled)
 		return 0;
@@ -366,6 +437,12 @@ int free_memtype(u64 start, u64 end)
 	if (is_ISA_range(start, end - 1))
 		return 0;
 
+	is_range_ram = pagerange_is_ram(start, end);
+	if (is_range_ram == 1)
+		return free_ram_pages_type(start, end);
+	else if (is_range_ram < 0)
+		return -EINVAL;
+
 	spin_lock(&memtype_lock);
 	list_for_each_entry(entry, &memtype_list, nd) {
 		if (entry->start == start && entry->end == end) {
@@ -386,6 +463,7 @@ int free_memtype(u64 start, u64 end)
 	}
 
 	dprintk("free_memtype request 0x%Lx-0x%Lx\n", start, end);
+
 	return err;
 }
 
@@ -492,9 +570,9 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 
 void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
 {
+	unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
 	u64 addr = (u64)pfn << PAGE_SHIFT;
 	unsigned long flags;
-	unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
 
 	reserve_memtype(addr, addr + size, want_flags, &flags);
 	if (flags != want_flags) {
@@ -514,7 +592,7 @@ void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
 	free_memtype(addr, addr + size);
 }
 
-#if defined(CONFIG_DEBUG_FS)
+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_X86_PAT)
 
 /* get Nth element of the linked list */
 static struct memtype *memtype_get_idx(loff_t pos)
@@ -537,6 +615,7 @@ static struct memtype *memtype_get_idx(loff_t pos)
 	}
 	spin_unlock(&memtype_lock);
 	kfree(print_entry);
+
 	return NULL;
 }
 
@@ -567,6 +646,7 @@ static int memtype_seq_show(struct seq_file *seq, void *v)
 	seq_printf(seq, "%s @ 0x%Lx-0x%Lx\n", cattr_name(print_entry->type),
 			print_entry->start, print_entry->end);
 	kfree(print_entry);
+
 	return 0;
 }
 
@@ -598,4 +678,4 @@ static int __init pat_memtype_list_init(void)
 
 late_initcall(pat_memtype_list_init);
 
-#endif /* CONFIG_DEBUG_FS */
+#endif /* CONFIG_DEBUG_FS && CONFIG_X86_PAT */
diff --git a/arch/x86/mm/pf_in.c b/arch/x86/mm/pf_in.c
index efa1911..df3d5c8 100644
--- a/arch/x86/mm/pf_in.c
+++ b/arch/x86/mm/pf_in.c
@@ -79,25 +79,34 @@ static unsigned int mw32[] = { 0xC7 };
 static unsigned int mw64[] = { 0x89, 0x8B };
 #endif /* not __i386__ */
 
-static int skip_prefix(unsigned char *addr, int *shorted, int *enlarged,
-								int *rexr)
+struct prefix_bits {
+	unsigned shorted:1;
+	unsigned enlarged:1;
+	unsigned rexr:1;
+	unsigned rex:1;
+};
+
+static int skip_prefix(unsigned char *addr, struct prefix_bits *prf)
 {
 	int i;
 	unsigned char *p = addr;
-	*shorted = 0;
-	*enlarged = 0;
-	*rexr = 0;
+	prf->shorted = 0;
+	prf->enlarged = 0;
+	prf->rexr = 0;
+	prf->rex = 0;
 
 restart:
 	for (i = 0; i < ARRAY_SIZE(prefix_codes); i++) {
 		if (*p == prefix_codes[i]) {
 			if (*p == 0x66)
-				*shorted = 1;
+				prf->shorted = 1;
 #ifdef __amd64__
 			if ((*p & 0xf8) == 0x48)
-				*enlarged = 1;
+				prf->enlarged = 1;
 			if ((*p & 0xf4) == 0x44)
-				*rexr = 1;
+				prf->rexr = 1;
+			if ((*p & 0xf0) == 0x40)
+				prf->rex = 1;
 #endif
 			p++;
 			goto restart;
@@ -135,12 +144,12 @@ enum reason_type get_ins_type(unsigned long ins_addr)
 {
 	unsigned int opcode;
 	unsigned char *p;
-	int shorted, enlarged, rexr;
+	struct prefix_bits prf;
 	int i;
 	enum reason_type rv = OTHERS;
 
 	p = (unsigned char *)ins_addr;
-	p += skip_prefix(p, &shorted, &enlarged, &rexr);
+	p += skip_prefix(p, &prf);
 	p += get_opcode(p, &opcode);
 
 	CHECK_OP_TYPE(opcode, reg_rop, REG_READ);
@@ -156,10 +165,11 @@ static unsigned int get_ins_reg_width(unsigned long ins_addr)
 {
 	unsigned int opcode;
 	unsigned char *p;
-	int i, shorted, enlarged, rexr;
+	struct prefix_bits prf;
+	int i;
 
 	p = (unsigned char *)ins_addr;
-	p += skip_prefix(p, &shorted, &enlarged, &rexr);
+	p += skip_prefix(p, &prf);
 	p += get_opcode(p, &opcode);
 
 	for (i = 0; i < ARRAY_SIZE(rw8); i++)
@@ -168,7 +178,7 @@ static unsigned int get_ins_reg_width(unsigned long ins_addr)
 
 	for (i = 0; i < ARRAY_SIZE(rw32); i++)
 		if (rw32[i] == opcode)
-			return (shorted ? 2 : (enlarged ? 8 : 4));
+			return prf.shorted ? 2 : (prf.enlarged ? 8 : 4);
 
 	printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode);
 	return 0;
@@ -178,10 +188,11 @@ unsigned int get_ins_mem_width(unsigned long ins_addr)
 {
 	unsigned int opcode;
 	unsigned char *p;
-	int i, shorted, enlarged, rexr;
+	struct prefix_bits prf;
+	int i;
 
 	p = (unsigned char *)ins_addr;
-	p += skip_prefix(p, &shorted, &enlarged, &rexr);
+	p += skip_prefix(p, &prf);
 	p += get_opcode(p, &opcode);
 
 	for (i = 0; i < ARRAY_SIZE(mw8); i++)
@@ -194,11 +205,11 @@ unsigned int get_ins_mem_width(unsigned long ins_addr)
 
 	for (i = 0; i < ARRAY_SIZE(mw32); i++)
 		if (mw32[i] == opcode)
-			return shorted ? 2 : 4;
+			return prf.shorted ? 2 : 4;
 
 	for (i = 0; i < ARRAY_SIZE(mw64); i++)
 		if (mw64[i] == opcode)
-			return shorted ? 2 : (enlarged ? 8 : 4);
+			return prf.shorted ? 2 : (prf.enlarged ? 8 : 4);
 
 	printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode);
 	return 0;
@@ -238,7 +249,7 @@ enum {
 #endif
 };
 
-static unsigned char *get_reg_w8(int no, struct pt_regs *regs)
+static unsigned char *get_reg_w8(int no, int rex, struct pt_regs *regs)
 {
 	unsigned char *rv = NULL;
 
@@ -255,18 +266,6 @@ static unsigned char *get_reg_w8(int no, struct pt_regs *regs)
 	case arg_DL:
 		rv = (unsigned char *)&regs->dx;
 		break;
-	case arg_AH:
-		rv = 1 + (unsigned char *)&regs->ax;
-		break;
-	case arg_BH:
-		rv = 1 + (unsigned char *)&regs->bx;
-		break;
-	case arg_CH:
-		rv = 1 + (unsigned char *)&regs->cx;
-		break;
-	case arg_DH:
-		rv = 1 + (unsigned char *)&regs->dx;
-		break;
 #ifdef __amd64__
 	case arg_R8:
 		rv = (unsigned char *)&regs->r8;
@@ -294,9 +293,55 @@ static unsigned char *get_reg_w8(int no, struct pt_regs *regs)
 		break;
 #endif
 	default:
-		printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no);
 		break;
 	}
+
+	if (rv)
+		return rv;
+
+	if (rex) {
+		/*
+		 * If REX prefix exists, access low bytes of SI etc.
+		 * instead of AH etc.
+		 */
+		switch (no) {
+		case arg_SI:
+			rv = (unsigned char *)&regs->si;
+			break;
+		case arg_DI:
+			rv = (unsigned char *)&regs->di;
+			break;
+		case arg_BP:
+			rv = (unsigned char *)&regs->bp;
+			break;
+		case arg_SP:
+			rv = (unsigned char *)&regs->sp;
+			break;
+		default:
+			break;
+		}
+	} else {
+		switch (no) {
+		case arg_AH:
+			rv = 1 + (unsigned char *)&regs->ax;
+			break;
+		case arg_BH:
+			rv = 1 + (unsigned char *)&regs->bx;
+			break;
+		case arg_CH:
+			rv = 1 + (unsigned char *)&regs->cx;
+			break;
+		case arg_DH:
+			rv = 1 + (unsigned char *)&regs->dx;
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (!rv)
+		printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no);
+
 	return rv;
 }
 
@@ -368,11 +413,12 @@ unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs)
 	unsigned char mod_rm;
 	int reg;
 	unsigned char *p;
-	int i, shorted, enlarged, rexr;
+	struct prefix_bits prf;
+	int i;
 	unsigned long rv;
 
 	p = (unsigned char *)ins_addr;
-	p += skip_prefix(p, &shorted, &enlarged, &rexr);
+	p += skip_prefix(p, &prf);
 	p += get_opcode(p, &opcode);
 	for (i = 0; i < ARRAY_SIZE(reg_rop); i++)
 		if (reg_rop[i] == opcode) {
@@ -392,10 +438,10 @@ unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs)
 
 do_work:
 	mod_rm = *p;
-	reg = ((mod_rm >> 3) & 0x7) | (rexr << 3);
+	reg = ((mod_rm >> 3) & 0x7) | (prf.rexr << 3);
 	switch (get_ins_reg_width(ins_addr)) {
 	case 1:
-		return *get_reg_w8(reg, regs);
+		return *get_reg_w8(reg, prf.rex, regs);
 
 	case 2:
 		return *(unsigned short *)get_reg_w32(reg, regs);
@@ -422,11 +468,12 @@ unsigned long get_ins_imm_val(unsigned long ins_addr)
 	unsigned char mod_rm;
 	unsigned char mod;
 	unsigned char *p;
-	int i, shorted, enlarged, rexr;
+	struct prefix_bits prf;
+	int i;
 	unsigned long rv;
 
 	p = (unsigned char *)ins_addr;
-	p += skip_prefix(p, &shorted, &enlarged, &rexr);
+	p += skip_prefix(p, &prf);
 	p += get_opcode(p, &opcode);
 	for (i = 0; i < ARRAY_SIZE(imm_wop); i++)
 		if (imm_wop[i] == opcode) {
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index d503027..86f2ffc 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -63,10 +63,8 @@ static inline void pgd_list_del(pgd_t *pgd)
 #define UNSHARED_PTRS_PER_PGD				\
 	(SHARED_KERNEL_PMD ? KERNEL_PGD_BOUNDARY : PTRS_PER_PGD)
 
-static void pgd_ctor(void *p)
+static void pgd_ctor(pgd_t *pgd)
 {
-	pgd_t *pgd = p;
-
 	/* If the pgd points to a shared pagetable level (either the
 	   ptes in non-PAE, or shared PMD in PAE), then just copy the
 	   references from swapper_pg_dir. */
@@ -87,7 +85,7 @@ static void pgd_ctor(void *p)
 		pgd_list_add(pgd);
 }
 
-static void pgd_dtor(void *pgd)
+static void pgd_dtor(pgd_t *pgd)
 {
 	unsigned long flags; /* can be called from interrupt context */
 
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index cab0abb..0951db9 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -123,7 +123,8 @@ static int __init parse_vmalloc(char *arg)
 	if (!arg)
 		return -EINVAL;
 
-	__VMALLOC_RESERVE = memparse(arg, &arg);
+	/* Add VMALLOC_OFFSET to the parsed value due to vm area guard hole*/
+	__VMALLOC_RESERVE = memparse(arg, &arg) + VMALLOC_OFFSET;
 	return 0;
 }
 early_param("vmalloc", parse_vmalloc);
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 1b4763e..51c0a2f 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -138,7 +138,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 		return;
 	}
 
-	if (is_uv_system())
+	if (get_uv_system_type() >= UV_X2APIC)
 		apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
 	else
 		apic_id = pa->apic_id;
diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c
index d877c5b..ab50a8d 100644
--- a/arch/x86/mm/testmmiotrace.c
+++ b/arch/x86/mm/testmmiotrace.c
@@ -3,6 +3,7 @@
  */
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/mmiotrace.h>
 
 #define MODULE_NAME "testmmiotrace"
 
@@ -13,6 +14,7 @@ MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB.");
 static void do_write_test(void __iomem *p)
 {
 	unsigned int i;
+	mmiotrace_printk("Write test.\n");
 	for (i = 0; i < 256; i++)
 		iowrite8(i, p + i);
 	for (i = 1024; i < (5 * 1024); i += 2)
@@ -24,6 +26,7 @@ static void do_write_test(void __iomem *p)
 static void do_read_test(void __iomem *p)
 {
 	unsigned int i;
+	mmiotrace_printk("Read test.\n");
 	for (i = 0; i < 256; i++)
 		ioread8(p + i);
 	for (i = 1024; i < (5 * 1024); i += 2)
@@ -39,6 +42,7 @@ static void do_test(void)
 		pr_err(MODULE_NAME ": could not ioremap, aborting.\n");
 		return;
 	}
+	mmiotrace_printk("ioremap returned %p.\n", p);
 	do_write_test(p);
 	do_read_test(p);
 	iounmap(p);
diff --git a/arch/x86/oprofile/Makefile b/arch/x86/oprofile/Makefile
index 30f3eb3..446902b 100644
--- a/arch/x86/oprofile/Makefile
+++ b/arch/x86/oprofile/Makefile
@@ -7,6 +7,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 		timer_int.o )
 
 oprofile-y				:= $(DRIVER_OBJS) init.o backtrace.o
-oprofile-$(CONFIG_X86_LOCAL_APIC) 	+= nmi_int.o op_model_athlon.o \
+oprofile-$(CONFIG_X86_LOCAL_APIC) 	+= nmi_int.o op_model_amd.o \
 					   op_model_ppro.o op_model_p4.o
 oprofile-$(CONFIG_X86_IO_APIC)		+= nmi_timer_int.o
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index e2095cb..04df67f 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -52,8 +52,7 @@ struct frame_head {
 	unsigned long ret;
 } __attribute__((packed));
 
-static struct frame_head *
-dump_user_backtrace(struct frame_head * head)
+static struct frame_head *dump_user_backtrace(struct frame_head *head)
 {
 	struct frame_head bufhead[2];
 
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 0227694..022cd41 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -1,10 +1,11 @@
 /**
  * @file nmi_int.c
  *
- * @remark Copyright 2002 OProfile authors
+ * @remark Copyright 2002-2008 OProfile authors
  * @remark Read the file COPYING
  *
  * @author John Levon <levon@movementarian.org>
+ * @author Robert Richter <robert.richter@amd.com>
  */
 
 #include <linux/init.h>
@@ -27,85 +28,9 @@ static struct op_x86_model_spec const *model;
 static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
 static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 
-static int nmi_start(void);
-static void nmi_stop(void);
-static void nmi_cpu_start(void *dummy);
-static void nmi_cpu_stop(void *dummy);
-
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
-#ifdef CONFIG_SMP
-static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
-				 void *data)
-{
-	int cpu = (unsigned long)data;
-	switch (action) {
-	case CPU_DOWN_FAILED:
-	case CPU_ONLINE:
-		smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
-		break;
-	case CPU_DOWN_PREPARE:
-		smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
-		break;
-	}
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block oprofile_cpu_nb = {
-	.notifier_call = oprofile_cpu_notifier
-};
-#endif
-
-#ifdef CONFIG_PM
-
-static int nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
-	/* Only one CPU left, just stop that one */
-	if (nmi_enabled == 1)
-		nmi_cpu_stop(NULL);
-	return 0;
-}
-
-static int nmi_resume(struct sys_device *dev)
-{
-	if (nmi_enabled == 1)
-		nmi_cpu_start(NULL);
-	return 0;
-}
-
-static struct sysdev_class oprofile_sysclass = {
-	.name		= "oprofile",
-	.resume		= nmi_resume,
-	.suspend	= nmi_suspend,
-};
-
-static struct sys_device device_oprofile = {
-	.id	= 0,
-	.cls	= &oprofile_sysclass,
-};
-
-static int __init init_sysfs(void)
-{
-	int error;
-
-	error = sysdev_class_register(&oprofile_sysclass);
-	if (!error)
-		error = sysdev_register(&device_oprofile);
-	return error;
-}
-
-static void exit_sysfs(void)
-{
-	sysdev_unregister(&device_oprofile);
-	sysdev_class_unregister(&oprofile_sysclass);
-}
-
-#else
-#define init_sysfs() do { } while (0)
-#define exit_sysfs() do { } while (0)
-#endif /* CONFIG_PM */
-
 static int profile_exceptions_notify(struct notifier_block *self,
 				     unsigned long val, void *data)
 {
@@ -295,10 +220,12 @@ static void nmi_cpu_shutdown(void *dummy)
 
 static void nmi_shutdown(void)
 {
-	struct op_msrs *msrs = &get_cpu_var(cpu_msrs);
+	struct op_msrs *msrs;
+
 	nmi_enabled = 0;
 	on_each_cpu(nmi_cpu_shutdown, NULL, 1);
 	unregister_die_notifier(&profile_exceptions_nb);
+	msrs = &get_cpu_var(cpu_msrs);
 	model->shutdown(msrs);
 	free_msrs();
 	put_cpu_var(cpu_msrs);
@@ -358,6 +285,77 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 	return 0;
 }
 
+#ifdef CONFIG_SMP
+static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
+				 void *data)
+{
+	int cpu = (unsigned long)data;
+	switch (action) {
+	case CPU_DOWN_FAILED:
+	case CPU_ONLINE:
+		smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
+		break;
+	case CPU_DOWN_PREPARE:
+		smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block oprofile_cpu_nb = {
+	.notifier_call = oprofile_cpu_notifier
+};
+#endif
+
+#ifdef CONFIG_PM
+
+static int nmi_suspend(struct sys_device *dev, pm_message_t state)
+{
+	/* Only one CPU left, just stop that one */
+	if (nmi_enabled == 1)
+		nmi_cpu_stop(NULL);
+	return 0;
+}
+
+static int nmi_resume(struct sys_device *dev)
+{
+	if (nmi_enabled == 1)
+		nmi_cpu_start(NULL);
+	return 0;
+}
+
+static struct sysdev_class oprofile_sysclass = {
+	.name		= "oprofile",
+	.resume		= nmi_resume,
+	.suspend	= nmi_suspend,
+};
+
+static struct sys_device device_oprofile = {
+	.id	= 0,
+	.cls	= &oprofile_sysclass,
+};
+
+static int __init init_sysfs(void)
+{
+	int error;
+
+	error = sysdev_class_register(&oprofile_sysclass);
+	if (!error)
+		error = sysdev_register(&device_oprofile);
+	return error;
+}
+
+static void exit_sysfs(void)
+{
+	sysdev_unregister(&device_oprofile);
+	sysdev_class_unregister(&oprofile_sysclass);
+}
+
+#else
+#define init_sysfs() do { } while (0)
+#define exit_sysfs() do { } while (0)
+#endif /* CONFIG_PM */
+
 static int p4force;
 module_param(p4force, int, 0);
 
@@ -417,9 +415,6 @@ static int __init ppro_init(char **cpu_type)
 	case 15: case 23:
 		*cpu_type = "i386/core_2";
 		break;
-	case 26:
-		*cpu_type = "i386/core_2";
-		break;
 	default:
 		/* Unknown */
 		return 0;
@@ -429,6 +424,16 @@ static int __init ppro_init(char **cpu_type)
 	return 1;
 }
 
+static int __init arch_perfmon_init(char **cpu_type)
+{
+	if (!cpu_has_arch_perfmon)
+		return 0;
+	*cpu_type = "i386/arch_perfmon";
+	model = &op_arch_perfmon_spec;
+	arch_perfmon_setup_counters();
+	return 1;
+}
+
 /* in order to get sysfs right */
 static int using_nmi;
 
@@ -436,7 +441,8 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 {
 	__u8 vendor = boot_cpu_data.x86_vendor;
 	__u8 family = boot_cpu_data.x86;
-	char *cpu_type;
+	char *cpu_type = NULL;
+	int ret = 0;
 
 	if (!cpu_has_apic)
 		return -ENODEV;
@@ -449,19 +455,23 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 		default:
 			return -ENODEV;
 		case 6:
-			model = &op_athlon_spec;
+			model = &op_amd_spec;
 			cpu_type = "i386/athlon";
 			break;
 		case 0xf:
-			model = &op_athlon_spec;
+			model = &op_amd_spec;
 			/* Actually it could be i386/hammer too, but give
 			 user space an consistent name. */
 			cpu_type = "x86-64/hammer";
 			break;
 		case 0x10:
-			model = &op_athlon_spec;
+			model = &op_amd_spec;
 			cpu_type = "x86-64/family10";
 			break;
+		case 0x11:
+			model = &op_amd_spec;
+			cpu_type = "x86-64/family11h";
+			break;
 		}
 		break;
 
@@ -469,36 +479,44 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 		switch (family) {
 			/* Pentium IV */
 		case 0xf:
-			if (!p4_init(&cpu_type))
-				return -ENODEV;
+			p4_init(&cpu_type);
 			break;
 
 			/* A P6-class processor */
 		case 6:
-			if (!ppro_init(&cpu_type))
-				return -ENODEV;
+			ppro_init(&cpu_type);
 			break;
 
 		default:
-			return -ENODEV;
+			break;
 		}
+
+		if (!cpu_type && !arch_perfmon_init(&cpu_type))
+			return -ENODEV;
 		break;
 
 	default:
 		return -ENODEV;
 	}
 
-	init_sysfs();
 #ifdef CONFIG_SMP
 	register_cpu_notifier(&oprofile_cpu_nb);
 #endif
-	using_nmi = 1;
+	/* default values, can be overwritten by model */
 	ops->create_files = nmi_create_files;
 	ops->setup = nmi_setup;
 	ops->shutdown = nmi_shutdown;
 	ops->start = nmi_start;
 	ops->stop = nmi_stop;
 	ops->cpu_type = cpu_type;
+
+	if (model->init)
+		ret = model->init(ops);
+	if (ret)
+		return ret;
+
+	init_sysfs();
+	using_nmi = 1;
 	printk(KERN_INFO "oprofile: using NMI interrupt.\n");
 	return 0;
 }
@@ -511,4 +529,6 @@ void op_nmi_exit(void)
 		unregister_cpu_notifier(&oprofile_cpu_nb);
 #endif
 	}
+	if (model->exit)
+		model->exit();
 }
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
index 2880b15..91b6a11 100644
--- a/arch/x86/oprofile/op_counter.h
+++ b/arch/x86/oprofile/op_counter.h
@@ -6,22 +6,22 @@
  *
  * @author John Levon
  */
- 
+
 #ifndef OP_COUNTER_H
 #define OP_COUNTER_H
- 
+
 #define OP_MAX_COUNTER 8
- 
+
 /* Per-perfctr configuration as set via
  * oprofilefs.
  */
 struct op_counter_config {
-        unsigned long count;
-        unsigned long enabled;
-        unsigned long event;
-        unsigned long kernel;
-        unsigned long user;
-        unsigned long unit_mask;
+	unsigned long count;
+	unsigned long enabled;
+	unsigned long event;
+	unsigned long kernel;
+	unsigned long user;
+	unsigned long unit_mask;
 };
 
 extern struct op_counter_config counter_config[];
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
new file mode 100644
index 0000000..5095137
--- /dev/null
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -0,0 +1,546 @@
+/*
+ * @file op_model_amd.c
+ * athlon / K7 / K8 / Family 10h model-specific MSR operations
+ *
+ * @remark Copyright 2002-2008 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon
+ * @author Philippe Elie
+ * @author Graydon Hoare
+ * @author Robert Richter <robert.richter@amd.com>
+ * @author Barry Kasindorf
+*/
+
+#include <linux/oprofile.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include <asm/ptrace.h>
+#include <asm/msr.h>
+#include <asm/nmi.h>
+
+#include "op_x86_model.h"
+#include "op_counter.h"
+
+#define NUM_COUNTERS 4
+#define NUM_CONTROLS 4
+
+#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
+#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
+#define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0)
+#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
+
+#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
+#define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
+#define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
+#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
+#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
+#define CTRL_CLEAR_LO(x) (x &= (1<<21))
+#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
+#define CTRL_SET_ENABLE(val) (val |= 1<<20)
+#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
+#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
+#define CTRL_SET_UM(val, m) (val |= (m << 8))
+#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
+#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
+#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
+#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
+
+static unsigned long reset_value[NUM_COUNTERS];
+
+#ifdef CONFIG_OPROFILE_IBS
+
+/* IbsFetchCtl bits/masks */
+#define IBS_FETCH_HIGH_VALID_BIT	(1UL << 17)	/* bit 49 */
+#define IBS_FETCH_HIGH_ENABLE		(1UL << 16)	/* bit 48 */
+#define IBS_FETCH_LOW_MAX_CNT_MASK	0x0000FFFFUL	/* MaxCnt mask */
+
+/*IbsOpCtl bits */
+#define IBS_OP_LOW_VALID_BIT		(1ULL<<18)	/* bit 18 */
+#define IBS_OP_LOW_ENABLE		(1ULL<<17)	/* bit 17 */
+
+/* Codes used in cpu_buffer.c */
+/* This produces duplicate code, need to be fixed */
+#define IBS_FETCH_BEGIN 3
+#define IBS_OP_BEGIN    4
+
+/* The function interface needs to be fixed, something like add
+   data. Should then be added to linux/oprofile.h. */
+extern void
+oprofile_add_ibs_sample(struct pt_regs *const regs,
+			unsigned int *const ibs_sample, int ibs_code);
+
+struct ibs_fetch_sample {
+	/* MSRC001_1031 IBS Fetch Linear Address Register */
+	unsigned int ibs_fetch_lin_addr_low;
+	unsigned int ibs_fetch_lin_addr_high;
+	/* MSRC001_1030 IBS Fetch Control Register */
+	unsigned int ibs_fetch_ctl_low;
+	unsigned int ibs_fetch_ctl_high;
+	/* MSRC001_1032 IBS Fetch Physical Address Register */
+	unsigned int ibs_fetch_phys_addr_low;
+	unsigned int ibs_fetch_phys_addr_high;
+};
+
+struct ibs_op_sample {
+	/* MSRC001_1034 IBS Op Logical Address Register (IbsRIP) */
+	unsigned int ibs_op_rip_low;
+	unsigned int ibs_op_rip_high;
+	/* MSRC001_1035 IBS Op Data Register */
+	unsigned int ibs_op_data1_low;
+	unsigned int ibs_op_data1_high;
+	/* MSRC001_1036 IBS Op Data 2 Register */
+	unsigned int ibs_op_data2_low;
+	unsigned int ibs_op_data2_high;
+	/* MSRC001_1037 IBS Op Data 3 Register */
+	unsigned int ibs_op_data3_low;
+	unsigned int ibs_op_data3_high;
+	/* MSRC001_1038 IBS DC Linear Address Register (IbsDcLinAd) */
+	unsigned int ibs_dc_linear_low;
+	unsigned int ibs_dc_linear_high;
+	/* MSRC001_1039 IBS DC Physical Address Register (IbsDcPhysAd) */
+	unsigned int ibs_dc_phys_low;
+	unsigned int ibs_dc_phys_high;
+};
+
+/*
+ * unitialize the APIC for the IBS interrupts if needed on AMD Family10h+
+*/
+static void clear_ibs_nmi(void);
+
+static int ibs_allowed;	/* AMD Family10h and later */
+
+struct op_ibs_config {
+	unsigned long op_enabled;
+	unsigned long fetch_enabled;
+	unsigned long max_cnt_fetch;
+	unsigned long max_cnt_op;
+	unsigned long rand_en;
+	unsigned long dispatched_ops;
+};
+
+static struct op_ibs_config ibs_config;
+
+#endif
+
+/* functions for op_amd_spec */
+
+static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
+{
+	int i;
+
+	for (i = 0; i < NUM_COUNTERS; i++) {
+		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
+			msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
+		else
+			msrs->counters[i].addr = 0;
+	}
+
+	for (i = 0; i < NUM_CONTROLS; i++) {
+		if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i))
+			msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
+		else
+			msrs->controls[i].addr = 0;
+	}
+}
+
+
+static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
+{
+	unsigned int low, high;
+	int i;
+
+	/* clear all counters */
+	for (i = 0 ; i < NUM_CONTROLS; ++i) {
+		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+			continue;
+		CTRL_READ(low, high, msrs, i);
+		CTRL_CLEAR_LO(low);
+		CTRL_CLEAR_HI(high);
+		CTRL_WRITE(low, high, msrs, i);
+	}
+
+	/* avoid a false detection of ctr overflows in NMI handler */
+	for (i = 0; i < NUM_COUNTERS; ++i) {
+		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
+			continue;
+		CTR_WRITE(1, msrs, i);
+	}
+
+	/* enable active counters */
+	for (i = 0; i < NUM_COUNTERS; ++i) {
+		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
+			reset_value[i] = counter_config[i].count;
+
+			CTR_WRITE(counter_config[i].count, msrs, i);
+
+			CTRL_READ(low, high, msrs, i);
+			CTRL_CLEAR_LO(low);
+			CTRL_CLEAR_HI(high);
+			CTRL_SET_ENABLE(low);
+			CTRL_SET_USR(low, counter_config[i].user);
+			CTRL_SET_KERN(low, counter_config[i].kernel);
+			CTRL_SET_UM(low, counter_config[i].unit_mask);
+			CTRL_SET_EVENT_LOW(low, counter_config[i].event);
+			CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
+			CTRL_SET_HOST_ONLY(high, 0);
+			CTRL_SET_GUEST_ONLY(high, 0);
+
+			CTRL_WRITE(low, high, msrs, i);
+		} else {
+			reset_value[i] = 0;
+		}
+	}
+}
+
+#ifdef CONFIG_OPROFILE_IBS
+
+static inline int
+op_amd_handle_ibs(struct pt_regs * const regs,
+		  struct op_msrs const * const msrs)
+{
+	unsigned int low, high;
+	struct ibs_fetch_sample ibs_fetch;
+	struct ibs_op_sample ibs_op;
+
+	if (!ibs_allowed)
+		return 1;
+
+	if (ibs_config.fetch_enabled) {
+		rdmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+		if (high & IBS_FETCH_HIGH_VALID_BIT) {
+			ibs_fetch.ibs_fetch_ctl_high = high;
+			ibs_fetch.ibs_fetch_ctl_low = low;
+			rdmsr(MSR_AMD64_IBSFETCHLINAD, low, high);
+			ibs_fetch.ibs_fetch_lin_addr_high = high;
+			ibs_fetch.ibs_fetch_lin_addr_low = low;
+			rdmsr(MSR_AMD64_IBSFETCHPHYSAD, low, high);
+			ibs_fetch.ibs_fetch_phys_addr_high = high;
+			ibs_fetch.ibs_fetch_phys_addr_low = low;
+
+			oprofile_add_ibs_sample(regs,
+						(unsigned int *)&ibs_fetch,
+						IBS_FETCH_BEGIN);
+
+			/*reenable the IRQ */
+			rdmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+			high &= ~IBS_FETCH_HIGH_VALID_BIT;
+			high |= IBS_FETCH_HIGH_ENABLE;
+			low &= IBS_FETCH_LOW_MAX_CNT_MASK;
+			wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+		}
+	}
+
+	if (ibs_config.op_enabled) {
+		rdmsr(MSR_AMD64_IBSOPCTL, low, high);
+		if (low & IBS_OP_LOW_VALID_BIT) {
+			rdmsr(MSR_AMD64_IBSOPRIP, low, high);
+			ibs_op.ibs_op_rip_low = low;
+			ibs_op.ibs_op_rip_high = high;
+			rdmsr(MSR_AMD64_IBSOPDATA, low, high);
+			ibs_op.ibs_op_data1_low = low;
+			ibs_op.ibs_op_data1_high = high;
+			rdmsr(MSR_AMD64_IBSOPDATA2, low, high);
+			ibs_op.ibs_op_data2_low = low;
+			ibs_op.ibs_op_data2_high = high;
+			rdmsr(MSR_AMD64_IBSOPDATA3, low, high);
+			ibs_op.ibs_op_data3_low = low;
+			ibs_op.ibs_op_data3_high = high;
+			rdmsr(MSR_AMD64_IBSDCLINAD, low, high);
+			ibs_op.ibs_dc_linear_low = low;
+			ibs_op.ibs_dc_linear_high = high;
+			rdmsr(MSR_AMD64_IBSDCPHYSAD, low, high);
+			ibs_op.ibs_dc_phys_low = low;
+			ibs_op.ibs_dc_phys_high = high;
+
+			/* reenable the IRQ */
+			oprofile_add_ibs_sample(regs,
+						(unsigned int *)&ibs_op,
+						IBS_OP_BEGIN);
+			rdmsr(MSR_AMD64_IBSOPCTL, low, high);
+			high = 0;
+			low &= ~IBS_OP_LOW_VALID_BIT;
+			low |= IBS_OP_LOW_ENABLE;
+			wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+		}
+	}
+
+	return 1;
+}
+
+#endif
+
+static int op_amd_check_ctrs(struct pt_regs * const regs,
+			     struct op_msrs const * const msrs)
+{
+	unsigned int low, high;
+	int i;
+
+	for (i = 0 ; i < NUM_COUNTERS; ++i) {
+		if (!reset_value[i])
+			continue;
+		CTR_READ(low, high, msrs, i);
+		if (CTR_OVERFLOWED(low)) {
+			oprofile_add_sample(regs, i);
+			CTR_WRITE(reset_value[i], msrs, i);
+		}
+	}
+
+#ifdef CONFIG_OPROFILE_IBS
+	op_amd_handle_ibs(regs, msrs);
+#endif
+
+	/* See op_model_ppro.c */
+	return 1;
+}
+
+static void op_amd_start(struct op_msrs const * const msrs)
+{
+	unsigned int low, high;
+	int i;
+	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+		if (reset_value[i]) {
+			CTRL_READ(low, high, msrs, i);
+			CTRL_SET_ACTIVE(low);
+			CTRL_WRITE(low, high, msrs, i);
+		}
+	}
+
+#ifdef CONFIG_OPROFILE_IBS
+	if (ibs_allowed && ibs_config.fetch_enabled) {
+		low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
+		high = ((ibs_config.rand_en & 0x1) << 25) /* bit 57 */
+			+ IBS_FETCH_HIGH_ENABLE;
+		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+	}
+
+	if (ibs_allowed && ibs_config.op_enabled) {
+		low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF)
+			+ ((ibs_config.dispatched_ops & 0x1) << 19) /* bit 19 */
+			+ IBS_OP_LOW_ENABLE;
+		high = 0;
+		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+	}
+#endif
+}
+
+
+static void op_amd_stop(struct op_msrs const * const msrs)
+{
+	unsigned int low, high;
+	int i;
+
+	/* Subtle: stop on all counters to avoid race with
+	 * setting our pm callback */
+	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+		if (!reset_value[i])
+			continue;
+		CTRL_READ(low, high, msrs, i);
+		CTRL_SET_INACTIVE(low);
+		CTRL_WRITE(low, high, msrs, i);
+	}
+
+#ifdef CONFIG_OPROFILE_IBS
+	if (ibs_allowed && ibs_config.fetch_enabled) {
+		low = 0;		/* clear max count and enable */
+		high = 0;
+		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+	}
+
+	if (ibs_allowed && ibs_config.op_enabled) {
+		low = 0;		/* clear max count and enable */
+		high = 0;
+		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+	}
+#endif
+}
+
+static void op_amd_shutdown(struct op_msrs const * const msrs)
+{
+	int i;
+
+	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+		if (CTR_IS_RESERVED(msrs, i))
+			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
+	}
+	for (i = 0 ; i < NUM_CONTROLS ; ++i) {
+		if (CTRL_IS_RESERVED(msrs, i))
+			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
+	}
+}
+
+#ifndef CONFIG_OPROFILE_IBS
+
+/* no IBS support */
+
+static int op_amd_init(struct oprofile_operations *ops)
+{
+	return 0;
+}
+
+static void op_amd_exit(void) {}
+
+#else
+
+static u8 ibs_eilvt_off;
+
+static inline void apic_init_ibs_nmi_per_cpu(void *arg)
+{
+	ibs_eilvt_off = setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_NMI, 0);
+}
+
+static inline void apic_clear_ibs_nmi_per_cpu(void *arg)
+{
+	setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_FIX, 1);
+}
+
+static int pfm_amd64_setup_eilvt(void)
+{
+#define IBSCTL_LVTOFFSETVAL		(1 << 8)
+#define IBSCTL				0x1cc
+	struct pci_dev *cpu_cfg;
+	int nodes;
+	u32 value = 0;
+
+	/* per CPU setup */
+	on_each_cpu(apic_init_ibs_nmi_per_cpu, NULL, 1);
+
+	nodes = 0;
+	cpu_cfg = NULL;
+	do {
+		cpu_cfg = pci_get_device(PCI_VENDOR_ID_AMD,
+					 PCI_DEVICE_ID_AMD_10H_NB_MISC,
+					 cpu_cfg);
+		if (!cpu_cfg)
+			break;
+		++nodes;
+		pci_write_config_dword(cpu_cfg, IBSCTL, ibs_eilvt_off
+				       | IBSCTL_LVTOFFSETVAL);
+		pci_read_config_dword(cpu_cfg, IBSCTL, &value);
+		if (value != (ibs_eilvt_off | IBSCTL_LVTOFFSETVAL)) {
+			printk(KERN_DEBUG "Failed to setup IBS LVT offset, "
+				"IBSCTL = 0x%08x", value);
+			return 1;
+		}
+	} while (1);
+
+	if (!nodes) {
+		printk(KERN_DEBUG "No CPU node configured for IBS");
+		return 1;
+	}
+
+#ifdef CONFIG_NUMA
+	/* Sanity check */
+	/* Works only for 64bit with proper numa implementation. */
+	if (nodes != num_possible_nodes()) {
+		printk(KERN_DEBUG "Failed to setup CPU node(s) for IBS, "
+			"found: %d, expected %d",
+			nodes, num_possible_nodes());
+		return 1;
+	}
+#endif
+	return 0;
+}
+
+/*
+ * initialize the APIC for the IBS interrupts
+ * if available (AMD Family10h rev B0 and later)
+ */
+static void setup_ibs(void)
+{
+	ibs_allowed = boot_cpu_has(X86_FEATURE_IBS);
+
+	if (!ibs_allowed)
+		return;
+
+	if (pfm_amd64_setup_eilvt()) {
+		ibs_allowed = 0;
+		return;
+	}
+
+	printk(KERN_INFO "oprofile: AMD IBS detected\n");
+}
+
+
+/*
+ * unitialize the APIC for the IBS interrupts if needed on AMD Family10h
+ * rev B0 and later */
+static void clear_ibs_nmi(void)
+{
+	if (ibs_allowed)
+		on_each_cpu(apic_clear_ibs_nmi_per_cpu, NULL, 1);
+}
+
+static int (*create_arch_files)(struct super_block *sb, struct dentry *root);
+
+static int setup_ibs_files(struct super_block *sb, struct dentry *root)
+{
+	struct dentry *dir;
+	int ret = 0;
+
+	/* architecture specific files */
+	if (create_arch_files)
+		ret = create_arch_files(sb, root);
+
+	if (ret)
+		return ret;
+
+	if (!ibs_allowed)
+		return ret;
+
+	/* model specific files */
+
+	/* setup some reasonable defaults */
+	ibs_config.max_cnt_fetch = 250000;
+	ibs_config.fetch_enabled = 0;
+	ibs_config.max_cnt_op = 250000;
+	ibs_config.op_enabled = 0;
+	ibs_config.dispatched_ops = 1;
+
+	dir = oprofilefs_mkdir(sb, root, "ibs_fetch");
+	oprofilefs_create_ulong(sb, dir, "enable",
+				&ibs_config.fetch_enabled);
+	oprofilefs_create_ulong(sb, dir, "max_count",
+				&ibs_config.max_cnt_fetch);
+	oprofilefs_create_ulong(sb, dir, "rand_enable",
+				&ibs_config.rand_en);
+
+	dir = oprofilefs_mkdir(sb, root, "ibs_op");
+	oprofilefs_create_ulong(sb, dir, "enable",
+				&ibs_config.op_enabled);
+	oprofilefs_create_ulong(sb, dir, "max_count",
+				&ibs_config.max_cnt_op);
+	oprofilefs_create_ulong(sb, dir, "dispatched_ops",
+				&ibs_config.dispatched_ops);
+
+	return 0;
+}
+
+static int op_amd_init(struct oprofile_operations *ops)
+{
+	setup_ibs();
+	create_arch_files = ops->create_files;
+	ops->create_files = setup_ibs_files;
+	return 0;
+}
+
+static void op_amd_exit(void)
+{
+	clear_ibs_nmi();
+}
+
+#endif
+
+struct op_x86_model_spec const op_amd_spec = {
+	.init			= op_amd_init,
+	.exit			= op_amd_exit,
+	.num_counters		= NUM_COUNTERS,
+	.num_controls		= NUM_CONTROLS,
+	.fill_in_addresses	= &op_amd_fill_in_addresses,
+	.setup_ctrs		= &op_amd_setup_ctrs,
+	.check_ctrs		= &op_amd_check_ctrs,
+	.start			= &op_amd_start,
+	.stop			= &op_amd_stop,
+	.shutdown		= &op_amd_shutdown
+};
diff --git a/arch/x86/oprofile/op_model_athlon.c b/arch/x86/oprofile/op_model_athlon.c
deleted file mode 100644
index 3d53487..0000000
--- a/arch/x86/oprofile/op_model_athlon.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * @file op_model_athlon.h
- * athlon / K7 / K8 / Family 10h model-specific MSR operations
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon
- * @author Philippe Elie
- * @author Graydon Hoare
- */
-
-#include <linux/oprofile.h>
-#include <asm/ptrace.h>
-#include <asm/msr.h>
-#include <asm/nmi.h>
-
-#include "op_x86_model.h"
-#include "op_counter.h"
-
-#define NUM_COUNTERS 4
-#define NUM_CONTROLS 4
-
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
-#define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0)
-#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
-#define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
-#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
-#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
-#define CTRL_CLEAR_LO(x) (x &= (1<<21))
-#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
-#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
-#define CTRL_SET_UM(val, m) (val |= (m << 8))
-#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
-#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
-#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
-#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
-
-static unsigned long reset_value[NUM_COUNTERS];
-
-static void athlon_fill_in_addresses(struct op_msrs * const msrs)
-{
-	int i;
-
-	for (i = 0; i < NUM_COUNTERS; i++) {
-		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
-			msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
-		else
-			msrs->counters[i].addr = 0;
-	}
-
-	for (i = 0; i < NUM_CONTROLS; i++) {
-		if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i))
-			msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
-		else
-			msrs->controls[i].addr = 0;
-	}
-}
-
-
-static void athlon_setup_ctrs(struct op_msrs const * const msrs)
-{
-	unsigned int low, high;
-	int i;
-
-	/* clear all counters */
-	for (i = 0 ; i < NUM_CONTROLS; ++i) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
-			continue;
-		CTRL_READ(low, high, msrs, i);
-		CTRL_CLEAR_LO(low);
-		CTRL_CLEAR_HI(high);
-		CTRL_WRITE(low, high, msrs, i);
-	}
-
-	/* avoid a false detection of ctr overflows in NMI handler */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
-			continue;
-		CTR_WRITE(1, msrs, i);
-	}
-
-	/* enable active counters */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
-			reset_value[i] = counter_config[i].count;
-
-			CTR_WRITE(counter_config[i].count, msrs, i);
-
-			CTRL_READ(low, high, msrs, i);
-			CTRL_CLEAR_LO(low);
-			CTRL_CLEAR_HI(high);
-			CTRL_SET_ENABLE(low);
-			CTRL_SET_USR(low, counter_config[i].user);
-			CTRL_SET_KERN(low, counter_config[i].kernel);
-			CTRL_SET_UM(low, counter_config[i].unit_mask);
-			CTRL_SET_EVENT_LOW(low, counter_config[i].event);
-			CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
-			CTRL_SET_HOST_ONLY(high, 0);
-			CTRL_SET_GUEST_ONLY(high, 0);
-
-			CTRL_WRITE(low, high, msrs, i);
-		} else {
-			reset_value[i] = 0;
-		}
-	}
-}
-
-
-static int athlon_check_ctrs(struct pt_regs * const regs,
-			     struct op_msrs const * const msrs)
-{
-	unsigned int low, high;
-	int i;
-
-	for (i = 0 ; i < NUM_COUNTERS; ++i) {
-		if (!reset_value[i])
-			continue;
-		CTR_READ(low, high, msrs, i);
-		if (CTR_OVERFLOWED(low)) {
-			oprofile_add_sample(regs, i);
-			CTR_WRITE(reset_value[i], msrs, i);
-		}
-	}
-
-	/* See op_model_ppro.c */
-	return 1;
-}
-
-
-static void athlon_start(struct op_msrs const * const msrs)
-{
-	unsigned int low, high;
-	int i;
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
-		if (reset_value[i]) {
-			CTRL_READ(low, high, msrs, i);
-			CTRL_SET_ACTIVE(low);
-			CTRL_WRITE(low, high, msrs, i);
-		}
-	}
-}
-
-
-static void athlon_stop(struct op_msrs const * const msrs)
-{
-	unsigned int low, high;
-	int i;
-
-	/* Subtle: stop on all counters to avoid race with
-	 * setting our pm callback */
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
-		if (!reset_value[i])
-			continue;
-		CTRL_READ(low, high, msrs, i);
-		CTRL_SET_INACTIVE(low);
-		CTRL_WRITE(low, high, msrs, i);
-	}
-}
-
-static void athlon_shutdown(struct op_msrs const * const msrs)
-{
-	int i;
-
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
-		if (CTR_IS_RESERVED(msrs, i))
-			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
-	}
-	for (i = 0 ; i < NUM_CONTROLS ; ++i) {
-		if (CTRL_IS_RESERVED(msrs, i))
-			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
-	}
-}
-
-struct op_x86_model_spec const op_athlon_spec = {
-	.num_counters = NUM_COUNTERS,
-	.num_controls = NUM_CONTROLS,
-	.fill_in_addresses = &athlon_fill_in_addresses,
-	.setup_ctrs = &athlon_setup_ctrs,
-	.check_ctrs = &athlon_check_ctrs,
-	.start = &athlon_start,
-	.stop = &athlon_stop,
-	.shutdown = &athlon_shutdown
-};
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 56b4757..4c4a51c 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -10,11 +10,12 @@
 
 #include <linux/oprofile.h>
 #include <linux/smp.h>
+#include <linux/ptrace.h>
+#include <linux/nmi.h>
 #include <asm/msr.h>
-#include <asm/ptrace.h>
 #include <asm/fixmap.h>
 #include <asm/apic.h>
-#include <asm/nmi.h>
+
 
 #include "op_x86_model.h"
 #include "op_counter.h"
@@ -40,7 +41,7 @@ static unsigned int num_controls = NUM_CONTROLS_NON_HT;
 static inline void setup_num_counters(void)
 {
 #ifdef CONFIG_SMP
-	if (smp_num_siblings == 2){
+	if (smp_num_siblings == 2) {
 		num_counters = NUM_COUNTERS_HT2;
 		num_controls = NUM_CONTROLS_HT2;
 	}
@@ -86,7 +87,7 @@ struct p4_event_binding {
 #define CTR_FLAME_2    (1 << 6)
 #define CTR_IQ_5       (1 << 7)
 
-static struct p4_counter_binding p4_counters [NUM_COUNTERS_NON_HT] = {
+static struct p4_counter_binding p4_counters[NUM_COUNTERS_NON_HT] = {
 	{ CTR_BPU_0,   MSR_P4_BPU_PERFCTR0,   MSR_P4_BPU_CCCR0 },
 	{ CTR_MS_0,    MSR_P4_MS_PERFCTR0,    MSR_P4_MS_CCCR0 },
 	{ CTR_FLAME_0, MSR_P4_FLAME_PERFCTR0, MSR_P4_FLAME_CCCR0 },
@@ -97,32 +98,32 @@ static struct p4_counter_binding p4_counters [NUM_COUNTERS_NON_HT] = {
 	{ CTR_IQ_5,    MSR_P4_IQ_PERFCTR5,    MSR_P4_IQ_CCCR5 }
 };
 
-#define NUM_UNUSED_CCCRS	NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT
+#define NUM_UNUSED_CCCRS (NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT)
 
 /* p4 event codes in libop/op_event.h are indices into this table. */
 
 static struct p4_event_binding p4_events[NUM_EVENTS] = {
-	
+
 	{ /* BRANCH_RETIRED */
-		0x05, 0x06, 
+		0x05, 0x06,
 		{ {CTR_IQ_4, MSR_P4_CRU_ESCR2},
 		  {CTR_IQ_5, MSR_P4_CRU_ESCR3} }
 	},
-	
+
 	{ /* MISPRED_BRANCH_RETIRED */
-		0x04, 0x03, 
+		0x04, 0x03,
 		{ { CTR_IQ_4, MSR_P4_CRU_ESCR0},
 		  { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
 	},
-	
+
 	{ /* TC_DELIVER_MODE */
 		0x01, 0x01,
-		{ { CTR_MS_0, MSR_P4_TC_ESCR0},  
+		{ { CTR_MS_0, MSR_P4_TC_ESCR0},
 		  { CTR_MS_2, MSR_P4_TC_ESCR1} }
 	},
-	
+
 	{ /* BPU_FETCH_REQUEST */
-		0x00, 0x03, 
+		0x00, 0x03,
 		{ { CTR_BPU_0, MSR_P4_BPU_ESCR0},
 		  { CTR_BPU_2, MSR_P4_BPU_ESCR1} }
 	},
@@ -146,7 +147,7 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 	},
 
 	{ /* LOAD_PORT_REPLAY */
-		0x02, 0x04, 
+		0x02, 0x04,
 		{ { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
 		  { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
 	},
@@ -170,43 +171,43 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 	},
 
 	{ /* BSQ_CACHE_REFERENCE */
-		0x07, 0x0c, 
+		0x07, 0x0c,
 		{ { CTR_BPU_0, MSR_P4_BSU_ESCR0},
 		  { CTR_BPU_2, MSR_P4_BSU_ESCR1} }
 	},
 
 	{ /* IOQ_ALLOCATION */
-		0x06, 0x03, 
+		0x06, 0x03,
 		{ { CTR_BPU_0, MSR_P4_FSB_ESCR0},
 		  { 0, 0 } }
 	},
 
 	{ /* IOQ_ACTIVE_ENTRIES */
-		0x06, 0x1a, 
+		0x06, 0x1a,
 		{ { CTR_BPU_2, MSR_P4_FSB_ESCR1},
 		  { 0, 0 } }
 	},
 
 	{ /* FSB_DATA_ACTIVITY */
-		0x06, 0x17, 
+		0x06, 0x17,
 		{ { CTR_BPU_0, MSR_P4_FSB_ESCR0},
 		  { CTR_BPU_2, MSR_P4_FSB_ESCR1} }
 	},
 
 	{ /* BSQ_ALLOCATION */
-		0x07, 0x05, 
+		0x07, 0x05,
 		{ { CTR_BPU_0, MSR_P4_BSU_ESCR0},
 		  { 0, 0 } }
 	},
 
 	{ /* BSQ_ACTIVE_ENTRIES */
 		0x07, 0x06,
-		{ { CTR_BPU_2, MSR_P4_BSU_ESCR1 /* guess */},  
+		{ { CTR_BPU_2, MSR_P4_BSU_ESCR1 /* guess */},
 		  { 0, 0 } }
 	},
 
 	{ /* X87_ASSIST */
-		0x05, 0x03, 
+		0x05, 0x03,
 		{ { CTR_IQ_4, MSR_P4_CRU_ESCR2},
 		  { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
 	},
@@ -216,21 +217,21 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
 		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
 	},
-  
+
 	{ /* PACKED_SP_UOP */
-		0x01, 0x08, 
+		0x01, 0x08,
 		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
 		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
 	},
-  
+
 	{ /* PACKED_DP_UOP */
-		0x01, 0x0c, 
+		0x01, 0x0c,
 		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
 		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
 	},
 
 	{ /* SCALAR_SP_UOP */
-		0x01, 0x0a, 
+		0x01, 0x0a,
 		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
 		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
 	},
@@ -242,31 +243,31 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 	},
 
 	{ /* 64BIT_MMX_UOP */
-		0x01, 0x02, 
+		0x01, 0x02,
 		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
 		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
 	},
-  
+
 	{ /* 128BIT_MMX_UOP */
-		0x01, 0x1a, 
+		0x01, 0x1a,
 		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
 		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
 	},
 
 	{ /* X87_FP_UOP */
-		0x01, 0x04, 
+		0x01, 0x04,
 		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
 		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
 	},
-  
+
 	{ /* X87_SIMD_MOVES_UOP */
-		0x01, 0x2e, 
+		0x01, 0x2e,
 		{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
 		  { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
 	},
-  
+
 	{ /* MACHINE_CLEAR */
-		0x05, 0x02, 
+		0x05, 0x02,
 		{ { CTR_IQ_4, MSR_P4_CRU_ESCR2},
 		  { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
 	},
@@ -276,9 +277,9 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 		{ { CTR_BPU_0, MSR_P4_FSB_ESCR0},
 		  { CTR_BPU_2, MSR_P4_FSB_ESCR1} }
 	},
-  
+
 	{ /* TC_MS_XFER */
-		0x00, 0x05, 
+		0x00, 0x05,
 		{ { CTR_MS_0, MSR_P4_MS_ESCR0},
 		  { CTR_MS_2, MSR_P4_MS_ESCR1} }
 	},
@@ -308,7 +309,7 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 	},
 
 	{ /* INSTR_RETIRED */
-		0x04, 0x02, 
+		0x04, 0x02,
 		{ { CTR_IQ_4, MSR_P4_CRU_ESCR0},
 		  { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
 	},
@@ -319,14 +320,14 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 		  { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
 	},
 
-	{ /* UOP_TYPE */    
-		0x02, 0x02, 
+	{ /* UOP_TYPE */
+		0x02, 0x02,
 		{ { CTR_IQ_4, MSR_P4_RAT_ESCR0},
 		  { CTR_IQ_5, MSR_P4_RAT_ESCR1} }
 	},
 
 	{ /* RETIRED_MISPRED_BRANCH_TYPE */
-		0x02, 0x05, 
+		0x02, 0x05,
 		{ { CTR_MS_0, MSR_P4_TBPU_ESCR0},
 		  { CTR_MS_2, MSR_P4_TBPU_ESCR1} }
 	},
@@ -349,8 +350,8 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 #define ESCR_SET_OS_1(escr, os) ((escr) |= (((os) & 1) << 1))
 #define ESCR_SET_EVENT_SELECT(escr, sel) ((escr) |= (((sel) & 0x3f) << 25))
 #define ESCR_SET_EVENT_MASK(escr, mask) ((escr) |= (((mask) & 0xffff) << 9))
-#define ESCR_READ(escr,high,ev,i) do {rdmsr(ev->bindings[(i)].escr_address, (escr), (high));} while (0)
-#define ESCR_WRITE(escr,high,ev,i) do {wrmsr(ev->bindings[(i)].escr_address, (escr), (high));} while (0)
+#define ESCR_READ(escr, high, ev, i) do {rdmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0)
+#define ESCR_WRITE(escr, high, ev, i) do {wrmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0)
 
 #define CCCR_RESERVED_BITS 0x38030FFF
 #define CCCR_CLEAR(cccr) ((cccr) &= CCCR_RESERVED_BITS)
@@ -360,15 +361,15 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 #define CCCR_SET_PMI_OVF_1(cccr) ((cccr) |= (1<<27))
 #define CCCR_SET_ENABLE(cccr) ((cccr) |= (1<<12))
 #define CCCR_SET_DISABLE(cccr) ((cccr) &= ~(1<<12))
-#define CCCR_READ(low, high, i) do {rdmsr(p4_counters[(i)].cccr_address, (low), (high));} while (0)
-#define CCCR_WRITE(low, high, i) do {wrmsr(p4_counters[(i)].cccr_address, (low), (high));} while (0)
+#define CCCR_READ(low, high, i) do {rdmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0)
+#define CCCR_WRITE(low, high, i) do {wrmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0)
 #define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
 #define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
 
-#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_READ(l,h,i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h));} while (0)
-#define CTR_WRITE(l,i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1);} while (0)
+#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
+#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
+#define CTR_READ(l, h, i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h)); } while (0)
+#define CTR_WRITE(l, i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1); } while (0)
 #define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
 
 
@@ -380,7 +381,7 @@ static unsigned int get_stagger(void)
 #ifdef CONFIG_SMP
 	int cpu = smp_processor_id();
 	return (cpu != first_cpu(per_cpu(cpu_sibling_map, cpu)));
-#endif	
+#endif
 	return 0;
 }
 
@@ -395,25 +396,23 @@ static unsigned long reset_value[NUM_COUNTERS_NON_HT];
 
 static void p4_fill_in_addresses(struct op_msrs * const msrs)
 {
-	unsigned int i; 
+	unsigned int i;
 	unsigned int addr, cccraddr, stag;
 
 	setup_num_counters();
 	stag = get_stagger();
 
 	/* initialize some registers */
-	for (i = 0; i < num_counters; ++i) {
+	for (i = 0; i < num_counters; ++i)
 		msrs->counters[i].addr = 0;
-	}
-	for (i = 0; i < num_controls; ++i) {
+	for (i = 0; i < num_controls; ++i)
 		msrs->controls[i].addr = 0;
-	}
-	
+
 	/* the counter & cccr registers we pay attention to */
 	for (i = 0; i < num_counters; ++i) {
 		addr = p4_counters[VIRT_CTR(stag, i)].counter_address;
 		cccraddr = p4_counters[VIRT_CTR(stag, i)].cccr_address;
-		if (reserve_perfctr_nmi(addr)){
+		if (reserve_perfctr_nmi(addr)) {
 			msrs->counters[i].addr = addr;
 			msrs->controls[i].addr = cccraddr;
 		}
@@ -447,22 +446,22 @@ static void p4_fill_in_addresses(struct op_msrs * const msrs)
 		if (reserve_evntsel_nmi(addr))
 			msrs->controls[i].addr = addr;
 	}
-	
+
 	for (addr = MSR_P4_MS_ESCR0 + stag;
-	     addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) { 
+	     addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) {
 		if (reserve_evntsel_nmi(addr))
 			msrs->controls[i].addr = addr;
 	}
-	
+
 	for (addr = MSR_P4_IX_ESCR0 + stag;
-	     addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) { 
+	     addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) {
 		if (reserve_evntsel_nmi(addr))
 			msrs->controls[i].addr = addr;
 	}
 
 	/* there are 2 remaining non-contiguously located ESCRs */
 
-	if (num_counters == NUM_COUNTERS_NON_HT) {		
+	if (num_counters == NUM_COUNTERS_NON_HT) {
 		/* standard non-HT CPUs handle both remaining ESCRs*/
 		if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5))
 			msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
@@ -498,20 +497,20 @@ static void pmc_setup_one_p4_counter(unsigned int ctr)
 	unsigned int stag;
 
 	stag = get_stagger();
-	
+
 	/* convert from counter *number* to counter *bit* */
 	counter_bit = 1 << VIRT_CTR(stag, ctr);
-	
+
 	/* find our event binding structure. */
 	if (counter_config[ctr].event <= 0 || counter_config[ctr].event > NUM_EVENTS) {
-		printk(KERN_ERR 
-		       "oprofile: P4 event code 0x%lx out of range\n", 
+		printk(KERN_ERR
+		       "oprofile: P4 event code 0x%lx out of range\n",
 		       counter_config[ctr].event);
 		return;
 	}
-	
+
 	ev = &(p4_events[counter_config[ctr].event - 1]);
-	
+
 	for (i = 0; i < maxbind; i++) {
 		if (ev->bindings[i].virt_counter & counter_bit) {
 
@@ -526,25 +525,24 @@ static void pmc_setup_one_p4_counter(unsigned int ctr)
 				ESCR_SET_OS_1(escr, counter_config[ctr].kernel);
 			}
 			ESCR_SET_EVENT_SELECT(escr, ev->event_select);
-			ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask);			
+			ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask);
 			ESCR_WRITE(escr, high, ev, i);
-		       
+
 			/* modify CCCR */
 			CCCR_READ(cccr, high, VIRT_CTR(stag, ctr));
 			CCCR_CLEAR(cccr);
 			CCCR_SET_REQUIRED_BITS(cccr);
 			CCCR_SET_ESCR_SELECT(cccr, ev->escr_select);
-			if (stag == 0) {
+			if (stag == 0)
 				CCCR_SET_PMI_OVF_0(cccr);
-			} else {
+			else
 				CCCR_SET_PMI_OVF_1(cccr);
-			}
 			CCCR_WRITE(cccr, high, VIRT_CTR(stag, ctr));
 			return;
 		}
 	}
 
-	printk(KERN_ERR 
+	printk(KERN_ERR
 	       "oprofile: P4 event code 0x%lx no binding, stag %d ctr %d\n",
 	       counter_config[ctr].event, stag, ctr);
 }
@@ -559,14 +557,14 @@ static void p4_setup_ctrs(struct op_msrs const * const msrs)
 	stag = get_stagger();
 
 	rdmsr(MSR_IA32_MISC_ENABLE, low, high);
-	if (! MISC_PMC_ENABLED_P(low)) {
+	if (!MISC_PMC_ENABLED_P(low)) {
 		printk(KERN_ERR "oprofile: P4 PMC not available\n");
 		return;
 	}
 
 	/* clear the cccrs we will use */
 	for (i = 0 ; i < num_counters ; i++) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
 		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 		CCCR_CLEAR(low);
@@ -576,14 +574,14 @@ static void p4_setup_ctrs(struct op_msrs const * const msrs)
 
 	/* clear all escrs (including those outside our concern) */
 	for (i = num_counters; i < num_controls; i++) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
 		wrmsr(msrs->controls[i].addr, 0, 0);
 	}
 
 	/* setup all counters */
 	for (i = 0 ; i < num_counters ; ++i) {
-		if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs,i))) {
+		if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
 			CTR_WRITE(counter_config[i].count, VIRT_CTR(stag, i));
@@ -603,11 +601,11 @@ static int p4_check_ctrs(struct pt_regs * const regs,
 	stag = get_stagger();
 
 	for (i = 0; i < num_counters; ++i) {
-		
-		if (!reset_value[i]) 
+
+		if (!reset_value[i])
 			continue;
 
-		/* 
+		/*
 		 * there is some eccentricity in the hardware which
 		 * requires that we perform 2 extra corrections:
 		 *
@@ -616,24 +614,24 @@ static int p4_check_ctrs(struct pt_regs * const regs,
 		 *
 		 * - write the counter back twice to ensure it gets
 		 *   updated properly.
-		 * 
+		 *
 		 * the former seems to be related to extra NMIs happening
 		 * during the current NMI; the latter is reported as errata
 		 * N15 in intel doc 249199-029, pentium 4 specification
 		 * update, though their suggested work-around does not
 		 * appear to solve the problem.
 		 */
-		
+
 		real = VIRT_CTR(stag, i);
 
 		CCCR_READ(low, high, real);
- 		CTR_READ(ctr, high, real);
+		CTR_READ(ctr, high, real);
 		if (CCCR_OVF_P(low) || CTR_OVERFLOW_P(ctr)) {
 			oprofile_add_sample(regs, i);
- 			CTR_WRITE(reset_value[i], real);
+			CTR_WRITE(reset_value[i], real);
 			CCCR_CLEAR_OVF(low);
 			CCCR_WRITE(low, high, real);
- 			CTR_WRITE(reset_value[i], real);
+			CTR_WRITE(reset_value[i], real);
 		}
 	}
 
@@ -683,15 +681,16 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0 ; i < num_counters ; ++i) {
-		if (CTR_IS_RESERVED(msrs,i))
+		if (CTR_IS_RESERVED(msrs, i))
 			release_perfctr_nmi(msrs->counters[i].addr);
 	}
-	/* some of the control registers are specially reserved in
+	/*
+	 * some of the control registers are specially reserved in
 	 * conjunction with the counter registers (hence the starting offset).
 	 * This saves a few bits.
 	 */
 	for (i = num_counters ; i < num_controls ; ++i) {
-		if (CTRL_IS_RESERVED(msrs,i))
+		if (CTRL_IS_RESERVED(msrs, i))
 			release_evntsel_nmi(msrs->controls[i].addr);
 	}
 }
@@ -699,24 +698,24 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 
 #ifdef CONFIG_SMP
 struct op_x86_model_spec const op_p4_ht2_spec = {
-	.num_counters = NUM_COUNTERS_HT2,
-	.num_controls = NUM_CONTROLS_HT2,
-	.fill_in_addresses = &p4_fill_in_addresses,
-	.setup_ctrs = &p4_setup_ctrs,
-	.check_ctrs = &p4_check_ctrs,
-	.start = &p4_start,
-	.stop = &p4_stop,
-	.shutdown = &p4_shutdown
+	.num_counters		= NUM_COUNTERS_HT2,
+	.num_controls		= NUM_CONTROLS_HT2,
+	.fill_in_addresses	= &p4_fill_in_addresses,
+	.setup_ctrs		= &p4_setup_ctrs,
+	.check_ctrs		= &p4_check_ctrs,
+	.start			= &p4_start,
+	.stop			= &p4_stop,
+	.shutdown		= &p4_shutdown
 };
 #endif
 
 struct op_x86_model_spec const op_p4_spec = {
-	.num_counters = NUM_COUNTERS_NON_HT,
-	.num_controls = NUM_CONTROLS_NON_HT,
-	.fill_in_addresses = &p4_fill_in_addresses,
-	.setup_ctrs = &p4_setup_ctrs,
-	.check_ctrs = &p4_check_ctrs,
-	.start = &p4_start,
-	.stop = &p4_stop,
-	.shutdown = &p4_shutdown
+	.num_counters		= NUM_COUNTERS_NON_HT,
+	.num_controls		= NUM_CONTROLS_NON_HT,
+	.fill_in_addresses	= &p4_fill_in_addresses,
+	.setup_ctrs		= &p4_setup_ctrs,
+	.check_ctrs		= &p4_check_ctrs,
+	.start			= &p4_start,
+	.stop			= &p4_stop,
+	.shutdown		= &p4_shutdown
 };
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index eff431f..0620d6d 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -1,32 +1,34 @@
 /*
  * @file op_model_ppro.h
- * pentium pro / P6 model-specific MSR operations
+ * Family 6 perfmon and architectural perfmon MSR operations
  *
  * @remark Copyright 2002 OProfile authors
+ * @remark Copyright 2008 Intel Corporation
  * @remark Read the file COPYING
  *
  * @author John Levon
  * @author Philippe Elie
  * @author Graydon Hoare
+ * @author Andi Kleen
  */
 
 #include <linux/oprofile.h>
+#include <linux/slab.h>
 #include <asm/ptrace.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
 #include <asm/nmi.h>
+#include <asm/intel_arch_perfmon.h>
 
 #include "op_x86_model.h"
 #include "op_counter.h"
 
-#define NUM_COUNTERS 2
-#define NUM_CONTROLS 2
+static int num_counters = 2;
+static int counter_width = 32;
 
 #define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
 #define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
-#define CTR_32BIT_WRITE(l, msrs, c)	\
-	do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0); } while (0)
-#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
+#define CTR_OVERFLOWED(n) (!((n) & (1U<<(counter_width-1))))
 
 #define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
 #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
@@ -40,20 +42,20 @@
 #define CTRL_SET_UM(val, m) (val |= (m << 8))
 #define CTRL_SET_EVENT(val, e) (val |= e)
 
-static unsigned long reset_value[NUM_COUNTERS];
+static u64 *reset_value;
 
 static void ppro_fill_in_addresses(struct op_msrs * const msrs)
 {
 	int i;
 
-	for (i = 0; i < NUM_COUNTERS; i++) {
+	for (i = 0; i < num_counters; i++) {
 		if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
 			msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
 		else
 			msrs->counters[i].addr = 0;
 	}
 
-	for (i = 0; i < NUM_CONTROLS; i++) {
+	for (i = 0; i < num_counters; i++) {
 		if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
 			msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
 		else
@@ -67,8 +69,22 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs)
 	unsigned int low, high;
 	int i;
 
+	if (!reset_value) {
+		reset_value = kmalloc(sizeof(unsigned) * num_counters,
+					GFP_ATOMIC);
+		if (!reset_value)
+			return;
+	}
+
+	if (cpu_has_arch_perfmon) {
+		union cpuid10_eax eax;
+		eax.full = cpuid_eax(0xa);
+		if (counter_width < eax.split.bit_width)
+			counter_width = eax.split.bit_width;
+	}
+
 	/* clear all counters */
-	for (i = 0 ; i < NUM_CONTROLS; ++i) {
+	for (i = 0 ; i < num_counters; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
 		CTRL_READ(low, high, msrs, i);
@@ -77,18 +93,18 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs)
 	}
 
 	/* avoid a false detection of ctr overflows in NMI handler */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
 			continue;
-		CTR_32BIT_WRITE(1, msrs, i);
+		wrmsrl(msrs->counters[i].addr, -1LL);
 	}
 
 	/* enable active counters */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
 
-			CTR_32BIT_WRITE(counter_config[i].count, msrs, i);
+			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 
 			CTRL_READ(low, high, msrs, i);
 			CTRL_CLEAR(low);
@@ -111,13 +127,13 @@ static int ppro_check_ctrs(struct pt_regs * const regs,
 	unsigned int low, high;
 	int i;
 
-	for (i = 0 ; i < NUM_COUNTERS; ++i) {
+	for (i = 0 ; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
 		CTR_READ(low, high, msrs, i);
 		if (CTR_OVERFLOWED(low)) {
 			oprofile_add_sample(regs, i);
-			CTR_32BIT_WRITE(reset_value[i], msrs, i);
+			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 		}
 	}
 
@@ -141,7 +157,7 @@ static void ppro_start(struct op_msrs const * const msrs)
 	unsigned int low, high;
 	int i;
 
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
 			CTRL_READ(low, high, msrs, i);
 			CTRL_SET_ACTIVE(low);
@@ -156,7 +172,7 @@ static void ppro_stop(struct op_msrs const * const msrs)
 	unsigned int low, high;
 	int i;
 
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
 		CTRL_READ(low, high, msrs, i);
@@ -169,24 +185,70 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 {
 	int i;
 
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+	for (i = 0 ; i < num_counters ; ++i) {
 		if (CTR_IS_RESERVED(msrs, i))
 			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
 	}
-	for (i = 0 ; i < NUM_CONTROLS ; ++i) {
+	for (i = 0 ; i < num_counters ; ++i) {
 		if (CTRL_IS_RESERVED(msrs, i))
 			release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
 	}
+	if (reset_value) {
+		kfree(reset_value);
+		reset_value = NULL;
+	}
 }
 
 
-struct op_x86_model_spec const op_ppro_spec = {
-	.num_counters = NUM_COUNTERS,
-	.num_controls = NUM_CONTROLS,
-	.fill_in_addresses = &ppro_fill_in_addresses,
-	.setup_ctrs = &ppro_setup_ctrs,
-	.check_ctrs = &ppro_check_ctrs,
-	.start = &ppro_start,
-	.stop = &ppro_stop,
-	.shutdown = &ppro_shutdown
+struct op_x86_model_spec op_ppro_spec = {
+	.num_counters		= 2,	/* can be overriden */
+	.num_controls		= 2,	/* dito */
+	.fill_in_addresses	= &ppro_fill_in_addresses,
+	.setup_ctrs		= &ppro_setup_ctrs,
+	.check_ctrs		= &ppro_check_ctrs,
+	.start			= &ppro_start,
+	.stop			= &ppro_stop,
+	.shutdown		= &ppro_shutdown
+};
+
+/*
+ * Architectural performance monitoring.
+ *
+ * Newer Intel CPUs (Core1+) have support for architectural
+ * events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
+ * The advantage of this is that it can be done without knowing about
+ * the specific CPU.
+ */
+
+void arch_perfmon_setup_counters(void)
+{
+	union cpuid10_eax eax;
+
+	eax.full = cpuid_eax(0xa);
+
+	/* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
+	if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 &&
+		current_cpu_data.x86_model == 15) {
+		eax.split.version_id = 2;
+		eax.split.num_counters = 2;
+		eax.split.bit_width = 40;
+	}
+
+	num_counters = eax.split.num_counters;
+
+	op_arch_perfmon_spec.num_counters = num_counters;
+	op_arch_perfmon_spec.num_controls = num_counters;
+	op_ppro_spec.num_counters = num_counters;
+	op_ppro_spec.num_controls = num_counters;
+}
+
+struct op_x86_model_spec op_arch_perfmon_spec = {
+	/* num_counters/num_controls filled in at runtime */
+	.fill_in_addresses	= &ppro_fill_in_addresses,
+	/* user space does the cpuid check for available events */
+	.setup_ctrs		= &ppro_setup_ctrs,
+	.check_ctrs		= &ppro_check_ctrs,
+	.start			= &ppro_start,
+	.stop			= &ppro_stop,
+	.shutdown		= &ppro_shutdown
 };
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 45b605f..825e790 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -22,8 +22,8 @@ struct op_msr {
 };
 
 struct op_msrs {
-	struct op_msr * counters;
-	struct op_msr * controls;
+	struct op_msr *counters;
+	struct op_msr *controls;
 };
 
 struct pt_regs;
@@ -32,8 +32,10 @@ struct pt_regs;
  * various x86 CPU models' perfctr support.
  */
 struct op_x86_model_spec {
-	unsigned int const num_counters;
-	unsigned int const num_controls;
+	int (*init)(struct oprofile_operations *ops);
+	void (*exit)(void);
+	unsigned int num_counters;
+	unsigned int num_controls;
 	void (*fill_in_addresses)(struct op_msrs * const msrs);
 	void (*setup_ctrs)(struct op_msrs const * const msrs);
 	int (*check_ctrs)(struct pt_regs * const regs,
@@ -43,9 +45,12 @@ struct op_x86_model_spec {
 	void (*shutdown)(struct op_msrs const * const msrs);
 };
 
-extern struct op_x86_model_spec const op_ppro_spec;
+extern struct op_x86_model_spec op_ppro_spec;
 extern struct op_x86_model_spec const op_p4_spec;
 extern struct op_x86_model_spec const op_p4_ht2_spec;
-extern struct op_x86_model_spec const op_athlon_spec;
+extern struct op_x86_model_spec const op_amd_spec;
+extern struct op_x86_model_spec op_arch_perfmon_spec;
+
+extern void arch_perfmon_setup_counters(void);
 
 #endif /* OP_X86_MODEL_H */
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 19af069..1d88d2b 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -250,10 +250,5 @@ int __init pci_acpi_init(void)
 			acpi_pci_irq_enable(dev);
 	}
 
-#ifdef CONFIG_X86_IO_APIC
-	if (acpi_ioapic)
-		print_IO_APIC();
-#endif
-
 	return 0;
 }
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 6a0fca7..22e0576 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -580,7 +580,7 @@ static int __cpuinit amd_cpu_notify(struct notifier_block *self,
 				    unsigned long action, void *hcpu)
 {
 	int cpu = (long)hcpu;
-	switch(action) {
+	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 		smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0);
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 4bdaa59..3c27a80 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -511,3 +511,31 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size);
+
+/*
+ * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
+ * confusing the PCI engine:
+ */
+static void sb600_disable_hpet_bar(struct pci_dev *dev)
+{
+	u8 val;
+
+	/*
+	 * The SB600 and SB700 both share the same device
+	 * ID, but the PM register 0x55 does something different
+	 * for the SB700, so make sure we are dealing with the
+	 * SB600 before touching the bit:
+	 */
+
+	pci_read_config_byte(dev, 0x08, &val);
+
+	if (val < 0x2F) {
+		outb(0x55, 0xCD6);
+		val = inb(0xCD7);
+
+		/* Set bit 7 in PM register 0x55 */
+		outb(0x55, 0xCD6);
+		outb(val | 0x80, 0xCD7);
+	}
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 8791fc5..844df0c 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -33,6 +33,7 @@
 #include <linux/bootmem.h>
 
 #include <asm/pat.h>
+#include <asm/e820.h>
 
 #include "pci.h"
 
@@ -227,6 +228,8 @@ void __init pcibios_resource_survey(void)
 	pcibios_allocate_bus_resources(&pci_root_buses);
 	pcibios_allocate_resources(0);
 	pcibios_allocate_resources(1);
+
+	e820_reserve_resources_late();
 }
 
 /**
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 8e07718..bf69dbe 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -493,7 +493,7 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 	if (pirq <= 4)
 		irq = read_config_nybble(router, 0x56, pirq - 1);
 	dev_info(&dev->dev,
-		 "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n",
+		 "AMD756: dev [%04x:%04x], router PIRQ %d get IRQ %d\n",
 		 dev->vendor, dev->device, pirq, irq);
 	return irq;
 }
@@ -501,7 +501,7 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
 	dev_info(&dev->dev,
-		 "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n",
+		 "AMD756: dev [%04x:%04x], router PIRQ %d set IRQ %d\n",
 		 dev->vendor, dev->device, pirq, irq);
 	if (pirq <= 4)
 		write_config_nybble(router, 0x56, pirq - 1, irq);
@@ -590,13 +590,20 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	case PCI_DEVICE_ID_INTEL_ICH10_1:
 	case PCI_DEVICE_ID_INTEL_ICH10_2:
 	case PCI_DEVICE_ID_INTEL_ICH10_3:
-	case PCI_DEVICE_ID_INTEL_PCH_0:
-	case PCI_DEVICE_ID_INTEL_PCH_1:
 		r->name = "PIIX/ICH";
 		r->get = pirq_piix_get;
 		r->set = pirq_piix_set;
 		return 1;
 	}
+
+	if ((device >= PCI_DEVICE_ID_INTEL_PCH_LPC_MIN) && 
+		(device <= PCI_DEVICE_ID_INTEL_PCH_LPC_MAX)) {
+		r->name = "PIIX/ICH";
+		r->get = pirq_piix_get;
+		r->set = pirq_piix_set;
+		return 1;
+	}
+
 	return 0;
 }
 
@@ -823,7 +830,7 @@ static void __init pirq_find_router(struct irq_router *r)
 	r->get = NULL;
 	r->set = NULL;
 
-	DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n",
+	DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for [%04x:%04x]\n",
 	    rt->rtr_vendor, rt->rtr_device);
 
 	pirq_router_dev = pci_get_bus_and_slot(rt->rtr_bus, rt->rtr_devfn);
@@ -843,7 +850,7 @@ static void __init pirq_find_router(struct irq_router *r)
 			h->probe(r, pirq_router_dev, pirq_router_dev->device))
 			break;
 	}
-	dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n",
+	dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x:%04x]\n",
 		 pirq_router.name,
 		 pirq_router_dev->vendor, pirq_router_dev->device);
 
@@ -1043,35 +1050,44 @@ static void __init pcibios_fixup_irqs(void)
 		if (io_apic_assign_pci_irqs) {
 			int irq;
 
-			if (pin) {
-				/*
-				 * interrupt pins are numbered starting
-				 * from 1
-				 */
-				pin--;
-				irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
-					PCI_SLOT(dev->devfn), pin);
-	/*
-	 * Busses behind bridges are typically not listed in the MP-table.
-	 * In this case we have to look up the IRQ based on the parent bus,
-	 * parent slot, and pin number. The SMP code detects such bridged
-	 * busses itself so we should get into this branch reliably.
-	 */
-				if (irq < 0 && dev->bus->parent) { /* go back to the bridge */
-					struct pci_dev *bridge = dev->bus->self;
-
-					pin = (pin + PCI_SLOT(dev->devfn)) % 4;
-					irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
-							PCI_SLOT(bridge->devfn), pin);
-					if (irq >= 0)
-						dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n",
-							 pci_name(bridge),
-							 'A' + pin, irq);
-				}
-				if (irq >= 0) {
-					dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq);
-					dev->irq = irq;
-				}
+			if (!pin)
+				continue;
+
+			/*
+			 * interrupt pins are numbered starting from 1
+			 */
+			pin--;
+			irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+				PCI_SLOT(dev->devfn), pin);
+			/*
+			 * Busses behind bridges are typically not listed in the
+			 * MP-table.  In this case we have to look up the IRQ
+			 * based on the parent bus, parent slot, and pin number.
+			 * The SMP code detects such bridged busses itself so we
+			 * should get into this branch reliably.
+			 */
+			if (irq < 0 && dev->bus->parent) {
+				/* go back to the bridge */
+				struct pci_dev *bridge = dev->bus->self;
+				int bus;
+
+				pin = (pin + PCI_SLOT(dev->devfn)) % 4;
+				bus = bridge->bus->number;
+				irq = IO_APIC_get_PCI_irq_vector(bus,
+						PCI_SLOT(bridge->devfn), pin);
+				if (irq >= 0)
+					dev_warn(&dev->dev,
+						"using bridge %s INT %c to "
+							"get IRQ %d\n",
+						 pci_name(bridge),
+						 'A' + pin, irq);
+			}
+			if (irq >= 0) {
+				dev_info(&dev->dev,
+					"PCI->APIC IRQ transform: INT %c "
+						"-> IRQ %d\n",
+					'A' + pin, irq);
+				dev->irq = irq;
 			}
 		}
 #endif
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index d963576..654a223 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -209,7 +209,7 @@ static int __init pci_mmcfg_check_hostbridge(void)
 	return name != NULL;
 }
 
-static void __init pci_mmcfg_insert_resources(unsigned long resource_flags)
+static void __init pci_mmcfg_insert_resources(void)
 {
 #define PCI_MMCFG_RESOURCE_NAME_LEN 19
 	int i;
@@ -233,7 +233,7 @@ static void __init pci_mmcfg_insert_resources(unsigned long resource_flags)
 			 cfg->pci_segment);
 		res->start = cfg->address;
 		res->end = res->start + (num_buses << 20) - 1;
-		res->flags = IORESOURCE_MEM | resource_flags;
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 		insert_resource(&iomem_resource, res);
 		names += PCI_MMCFG_RESOURCE_NAME_LEN;
 	}
@@ -434,11 +434,9 @@ static void __init __pci_mmcfg_init(int early)
 	    (pci_mmcfg_config[0].address == 0))
 		return;
 
-	if (pci_mmcfg_arch_init()) {
-		if (known_bridge)
-			pci_mmcfg_insert_resources(IORESOURCE_BUSY);
+	if (pci_mmcfg_arch_init())
 		pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
-	} else {
+	else {
 		/*
 		 * Signal not to attempt to insert mmcfg resources because
 		 * the architecture mmcfg setup could not initialize.
@@ -475,7 +473,7 @@ static int __init pci_mmcfg_late_insert_resources(void)
 	 * marked so it won't cause request errors when __request_region is
 	 * called.
 	 */
-	pci_mmcfg_insert_resources(0);
+	pci_mmcfg_insert_resources();
 
 	return 0;
 }
diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c
index d3e083d..274d060 100644
--- a/arch/x86/power/cpu_32.c
+++ b/arch/x86/power/cpu_32.c
@@ -11,6 +11,7 @@
 #include <linux/suspend.h>
 #include <asm/mtrr.h>
 #include <asm/mce.h>
+#include <asm/xcr.h>
 
 static struct saved_context saved_context;
 
@@ -126,6 +127,12 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	if (boot_cpu_has(X86_FEATURE_SEP))
 		enable_sep_cpu();
 
+	/*
+	 * restore XCR0 for xsave capable cpu's.
+	 */
+	if (cpu_has_xsave)
+		xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
+
 	fix_processor_context();
 	do_fpu_end();
 	mtrr_ap_init();
diff --git a/arch/x86/power/cpu_64.c b/arch/x86/power/cpu_64.c
index 66bdfb5..e3b6cf7 100644
--- a/arch/x86/power/cpu_64.c
+++ b/arch/x86/power/cpu_64.c
@@ -14,6 +14,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mtrr.h>
+#include <asm/xcr.h>
 
 static void fix_processor_context(void);
 
@@ -122,6 +123,12 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	wrmsrl(MSR_GS_BASE, ctxt->gs_base);
 	wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
 
+	/*
+	 * restore XCR0 for xsave capable cpu's.
+	 */
+	if (cpu_has_xsave)
+		xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
+
 	fix_processor_context();
 
 	do_fpu_end();
diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S
index 4fc7e87..d1e9b53 100644
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -1,5 +1,3 @@
-.text
-
 /*
  * This may not use any stack, nor any variable that is not "NoSave":
  *
@@ -12,17 +10,18 @@
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/asm-offsets.h>
+#include <asm/processor-flags.h>
 
-	.text
+.text
 
 ENTRY(swsusp_arch_suspend)
-
 	movl %esp, saved_context_esp
 	movl %ebx, saved_context_ebx
 	movl %ebp, saved_context_ebp
 	movl %esi, saved_context_esi
 	movl %edi, saved_context_edi
-	pushfl ; popl saved_context_eflags
+	pushfl
+	popl saved_context_eflags
 
 	call swsusp_save
 	ret
@@ -59,7 +58,7 @@ done:
 	movl	mmu_cr4_features, %ecx
 	jecxz	1f	# cr4 Pentium and higher, skip if zero
 	movl	%ecx, %edx
-	andl	$~(1<<7), %edx;  # PGE
+	andl	$~(X86_CR4_PGE), %edx
 	movl	%edx, %cr4;  # turn off PGE
 1:
 	movl	%cr3, %eax;  # flush TLB
@@ -74,7 +73,8 @@ done:
 	movl saved_context_esi, %esi
 	movl saved_context_edi, %edi
 
-	pushl saved_context_eflags ; popfl
+	pushl saved_context_eflags
+	popfl
 
 	xorl	%eax, %eax
 
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 3815e42..87b9ab1 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -26,5 +26,13 @@ config XEN_MAX_DOMAIN_MEMORY
 
 config XEN_SAVE_RESTORE
        bool
-       depends on PM
-       default y
\ No newline at end of file
+       depends on XEN && PM
+       default y
+
+config XEN_DEBUG_FS
+	bool "Enable Xen debug and tuning parameters in debugfs"
+	depends on XEN && DEBUG_FS
+	default n
+	help
+	  Enable statistics output and various tuning options in debugfs.
+	  Enabling this option may incur a significant performance overhead.
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 59c1e53..3139479 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -1,4 +1,12 @@
-obj-y		:= enlighten.o setup.o multicalls.o mmu.o \
+ifdef CONFIG_FTRACE
+# Do not profile debug and lowlevel utilities
+CFLAGS_REMOVE_spinlock.o = -pg
+CFLAGS_REMOVE_time.o = -pg
+CFLAGS_REMOVE_irq.o = -pg
+endif
+
+obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
 			time.o xen-asm_$(BITS).o grant-table.o suspend.o
 
-obj-$(CONFIG_SMP)	+= smp.o
+obj-$(CONFIG_SMP)		+= smp.o spinlock.o
+obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
\ No newline at end of file
diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c
new file mode 100644
index 0000000..b53225d
--- /dev/null
+++ b/arch/x86/xen/debugfs.c
@@ -0,0 +1,123 @@
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/module.h>
+
+#include "debugfs.h"
+
+static struct dentry *d_xen_debug;
+
+struct dentry * __init xen_init_debugfs(void)
+{
+	if (!d_xen_debug) {
+		d_xen_debug = debugfs_create_dir("xen", NULL);
+
+		if (!d_xen_debug)
+			pr_warning("Could not create 'xen' debugfs directory\n");
+	}
+
+	return d_xen_debug;
+}
+
+struct array_data
+{
+	void *array;
+	unsigned elements;
+};
+
+static int u32_array_open(struct inode *inode, struct file *file)
+{
+	file->private_data = NULL;
+	return nonseekable_open(inode, file);
+}
+
+static size_t format_array(char *buf, size_t bufsize, const char *fmt,
+			   u32 *array, unsigned array_size)
+{
+	size_t ret = 0;
+	unsigned i;
+
+	for(i = 0; i < array_size; i++) {
+		size_t len;
+
+		len = snprintf(buf, bufsize, fmt, array[i]);
+		len++;	/* ' ' or '\n' */
+		ret += len;
+
+		if (buf) {
+			buf += len;
+			bufsize -= len;
+			buf[-1] = (i == array_size-1) ? '\n' : ' ';
+		}
+	}
+
+	ret++;		/* \0 */
+	if (buf)
+		*buf = '\0';
+
+	return ret;
+}
+
+static char *format_array_alloc(const char *fmt, u32 *array, unsigned array_size)
+{
+	size_t len = format_array(NULL, 0, fmt, array, array_size);
+	char *ret;
+
+	ret = kmalloc(len, GFP_KERNEL);
+	if (ret == NULL)
+		return NULL;
+
+	format_array(ret, len, fmt, array, array_size);
+	return ret;
+}
+
+static ssize_t u32_array_read(struct file *file, char __user *buf, size_t len,
+			      loff_t *ppos)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
+	struct array_data *data = inode->i_private;
+	size_t size;
+
+	if (*ppos == 0) {
+		if (file->private_data) {
+			kfree(file->private_data);
+			file->private_data = NULL;
+		}
+
+		file->private_data = format_array_alloc("%u", data->array, data->elements);
+	}
+
+	size = 0;
+	if (file->private_data)
+		size = strlen(file->private_data);
+
+	return simple_read_from_buffer(buf, len, ppos, file->private_data, size);
+}
+
+static int xen_array_release(struct inode *inode, struct file *file)
+{
+	kfree(file->private_data);
+
+	return 0;
+}
+
+static struct file_operations u32_array_fops = {
+	.owner	= THIS_MODULE,
+	.open	= u32_array_open,
+	.release= xen_array_release,
+	.read	= u32_array_read,
+};
+
+struct dentry *xen_debugfs_create_u32_array(const char *name, mode_t mode,
+					    struct dentry *parent,
+					    u32 *array, unsigned elements)
+{
+	struct array_data *data = kmalloc(sizeof(*data), GFP_KERNEL);
+
+	if (data == NULL)
+		return NULL;
+
+	data->array = array;
+	data->elements = elements;
+
+	return debugfs_create_file(name, mode, parent, data, &u32_array_fops);
+}
diff --git a/arch/x86/xen/debugfs.h b/arch/x86/xen/debugfs.h
new file mode 100644
index 0000000..e281320
--- /dev/null
+++ b/arch/x86/xen/debugfs.h
@@ -0,0 +1,10 @@
+#ifndef _XEN_DEBUGFS_H
+#define _XEN_DEBUGFS_H
+
+struct dentry * __init xen_init_debugfs(void);
+
+struct dentry *xen_debugfs_create_u32_array(const char *name, mode_t mode,
+					    struct dentry *parent,
+					    u32 *array, unsigned elements);
+
+#endif /* _XEN_DEBUGFS_H */
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index a4e201b..b61534c 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -30,12 +30,12 @@
 #include <xen/interface/xen.h>
 #include <xen/interface/physdev.h>
 #include <xen/interface/vcpu.h>
-#include <xen/interface/sched.h>
 #include <xen/features.h>
 #include <xen/page.h>
 #include <xen/hvc-console.h>
 
 #include <asm/paravirt.h>
+#include <asm/apic.h>
 #include <asm/page.h>
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
@@ -57,6 +57,9 @@ EXPORT_SYMBOL_GPL(hypercall_page);
 DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
 DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 
+enum xen_domain_type xen_domain_type = XEN_NATIVE;
+EXPORT_SYMBOL_GPL(xen_domain_type);
+
 /*
  * Identity map, in addition to plain kernel map.  This needs to be
  * large enough to allocate page table pages to allocate the rest.
@@ -110,7 +113,14 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info;
  *
  * 0: not available, 1: available
  */
-static int have_vcpu_info_placement = 1;
+static int have_vcpu_info_placement =
+#ifdef CONFIG_X86_32
+	1
+#else
+	0
+#endif
+	;
+
 
 static void xen_vcpu_setup(int cpu)
 {
@@ -226,103 +236,68 @@ static unsigned long xen_get_debugreg(int reg)
 	return HYPERVISOR_get_debugreg(reg);
 }
 
-static unsigned long xen_save_fl(void)
+static void xen_leave_lazy(void)
 {
-	struct vcpu_info *vcpu;
-	unsigned long flags;
-
-	vcpu = x86_read_percpu(xen_vcpu);
-
-	/* flag has opposite sense of mask */
-	flags = !vcpu->evtchn_upcall_mask;
-
-	/* convert to IF type flag
-	   -0 -> 0x00000000
-	   -1 -> 0xffffffff
-	*/
-	return (-flags) & X86_EFLAGS_IF;
+	paravirt_leave_lazy(paravirt_get_lazy_mode());
+	xen_mc_flush();
 }
 
-static void xen_restore_fl(unsigned long flags)
+static unsigned long xen_store_tr(void)
 {
-	struct vcpu_info *vcpu;
-
-	/* convert from IF type flag */
-	flags = !(flags & X86_EFLAGS_IF);
-
-	/* There's a one instruction preempt window here.  We need to
-	   make sure we're don't switch CPUs between getting the vcpu
-	   pointer and updating the mask. */
-	preempt_disable();
-	vcpu = x86_read_percpu(xen_vcpu);
-	vcpu->evtchn_upcall_mask = flags;
-	preempt_enable_no_resched();
-
-	/* Doesn't matter if we get preempted here, because any
-	   pending event will get dealt with anyway. */
-
-	if (flags == 0) {
-		preempt_check_resched();
-		barrier(); /* unmask then check (avoid races) */
-		if (unlikely(vcpu->evtchn_upcall_pending))
-			force_evtchn_callback();
-	}
+	return 0;
 }
 
-static void xen_irq_disable(void)
+/*
+ * Set the page permissions for a particular virtual address.  If the
+ * address is a vmalloc mapping (or other non-linear mapping), then
+ * find the linear mapping of the page and also set its protections to
+ * match.
+ */
+static void set_aliased_prot(void *v, pgprot_t prot)
 {
-	/* There's a one instruction preempt window here.  We need to
-	   make sure we're don't switch CPUs between getting the vcpu
-	   pointer and updating the mask. */
-	preempt_disable();
-	x86_read_percpu(xen_vcpu)->evtchn_upcall_mask = 1;
-	preempt_enable_no_resched();
-}
+	int level;
+	pte_t *ptep;
+	pte_t pte;
+	unsigned long pfn;
+	struct page *page;
 
-static void xen_irq_enable(void)
-{
-	struct vcpu_info *vcpu;
+	ptep = lookup_address((unsigned long)v, &level);
+	BUG_ON(ptep == NULL);
 
-	/* We don't need to worry about being preempted here, since
-	   either a) interrupts are disabled, so no preemption, or b)
-	   the caller is confused and is trying to re-enable interrupts
-	   on an indeterminate processor. */
+	pfn = pte_pfn(*ptep);
+	page = pfn_to_page(pfn);
 
-	vcpu = x86_read_percpu(xen_vcpu);
-	vcpu->evtchn_upcall_mask = 0;
+	pte = pfn_pte(pfn, prot);
 
-	/* Doesn't matter if we get preempted here, because any
-	   pending event will get dealt with anyway. */
+	if (HYPERVISOR_update_va_mapping((unsigned long)v, pte, 0))
+		BUG();
 
-	barrier(); /* unmask then check (avoid races) */
-	if (unlikely(vcpu->evtchn_upcall_pending))
-		force_evtchn_callback();
-}
+	if (!PageHighMem(page)) {
+		void *av = __va(PFN_PHYS(pfn));
 
-static void xen_safe_halt(void)
-{
-	/* Blocking includes an implicit local_irq_enable(). */
-	if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0)
-		BUG();
+		if (av != v)
+			if (HYPERVISOR_update_va_mapping((unsigned long)av, pte, 0))
+				BUG();
+	} else
+		kmap_flush_unused();
 }
 
-static void xen_halt(void)
+static void xen_alloc_ldt(struct desc_struct *ldt, unsigned entries)
 {
-	if (irqs_disabled())
-		HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
-	else
-		xen_safe_halt();
-}
+	const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
+	int i;
 
-static void xen_leave_lazy(void)
-{
-	paravirt_leave_lazy(paravirt_get_lazy_mode());
-	xen_mc_flush();
+	for(i = 0; i < entries; i += entries_per_page)
+		set_aliased_prot(ldt + i, PAGE_KERNEL_RO);
 }
 
-static unsigned long xen_store_tr(void)
+static void xen_free_ldt(struct desc_struct *ldt, unsigned entries)
 {
-	return 0;
+	const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
+	int i;
+
+	for(i = 0; i < entries; i += entries_per_page)
+		set_aliased_prot(ldt + i, PAGE_KERNEL);
 }
 
 static void xen_set_ldt(const void *addr, unsigned entries)
@@ -425,8 +400,7 @@ static void xen_load_gs_index(unsigned int idx)
 static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 				const void *ptr)
 {
-	unsigned long lp = (unsigned long)&dt[entrynum];
-	xmaddr_t mach_lp = virt_to_machine(lp);
+	xmaddr_t mach_lp = arbitrary_virt_to_machine(&dt[entrynum]);
 	u64 entry = *(u64 *)ptr;
 
 	preempt_disable();
@@ -559,7 +533,7 @@ static void xen_write_gdt_entry(struct desc_struct *dt, int entry,
 }
 
 static void xen_load_sp0(struct tss_struct *tss,
-			  struct thread_struct *thread)
+			 struct thread_struct *thread)
 {
 	struct multicall_space mcs = xen_mc_entry(0);
 	MULTI_stack_switch(mcs.mc, __KERNEL_DS, thread->sp0);
@@ -580,16 +554,47 @@ static void xen_io_delay(void)
 }
 
 #ifdef CONFIG_X86_LOCAL_APIC
-static u32 xen_apic_read(unsigned long reg)
+static u32 xen_apic_read(u32 reg)
 {
 	return 0;
 }
 
-static void xen_apic_write(unsigned long reg, u32 val)
+static void xen_apic_write(u32 reg, u32 val)
 {
 	/* Warn to see if there's any stray references */
 	WARN_ON(1);
 }
+
+static u64 xen_apic_icr_read(void)
+{
+	return 0;
+}
+
+static void xen_apic_icr_write(u32 low, u32 id)
+{
+	/* Warn to see if there's any stray references */
+	WARN_ON(1);
+}
+
+static void xen_apic_wait_icr_idle(void)
+{
+        return;
+}
+
+static u32 xen_safe_apic_wait_icr_idle(void)
+{
+        return 0;
+}
+
+static struct apic_ops xen_basic_apic_ops = {
+	.read = xen_apic_read,
+	.write = xen_apic_write,
+	.icr_read = xen_apic_icr_read,
+	.icr_write = xen_apic_icr_write,
+	.wait_icr_idle = xen_apic_wait_icr_idle,
+	.safe_wait_icr_idle = xen_safe_apic_wait_icr_idle,
+};
+
 #endif
 
 static void xen_flush_tlb(void)
@@ -803,6 +808,19 @@ static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 			ret = -EFAULT;
 		break;
 #endif
+
+	case MSR_STAR:
+	case MSR_CSTAR:
+	case MSR_LSTAR:
+	case MSR_SYSCALL_MASK:
+	case MSR_IA32_SYSENTER_CS:
+	case MSR_IA32_SYSENTER_ESP:
+	case MSR_IA32_SYSENTER_EIP:
+		/* Fast syscall setup is all done in hypercalls, so
+		   these are all ignored.  Stub them out here to stop
+		   Xen console noise. */
+		break;
+
 	default:
 		ret = native_write_msr_safe(msr, low, high);
 	}
@@ -812,7 +830,7 @@ static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 
 /* Early in boot, while setting up the initial pagetable, assume
    everything is pinned. */
-static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn)
+static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
 {
 #ifdef CONFIG_FLATMEM
 	BUG_ON(mem_map);	/* should only be used early */
@@ -822,7 +840,7 @@ static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn)
 
 /* Early release_pte assumes that all pts are pinned, since there's
    only init_mm and anything attached to that is pinned. */
-static void xen_release_pte_init(u32 pfn)
+static void xen_release_pte_init(unsigned long pfn)
 {
 	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 }
@@ -838,7 +856,7 @@ static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
 
 /* This needs to make sure the new pte page is pinned iff its being
    attached to a pinned pagetable. */
-static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level)
+static void xen_alloc_ptpage(struct mm_struct *mm, unsigned long pfn, unsigned level)
 {
 	struct page *page = pfn_to_page(pfn);
 
@@ -846,22 +864,23 @@ static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level)
 		SetPagePinned(page);
 
 		if (!PageHighMem(page)) {
-			make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
-			if (level == PT_PTE)
+			make_lowmem_page_readonly(__va(PFN_PHYS((unsigned long)pfn)));
+			if (level == PT_PTE && USE_SPLIT_PTLOCKS)
 				pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
 		} else
 			/* make sure there are no stray mappings of
 			   this page */
 			kmap_flush_unused();
+			vm_unmap_aliases();
 	}
 }
 
-static void xen_alloc_pte(struct mm_struct *mm, u32 pfn)
+static void xen_alloc_pte(struct mm_struct *mm, unsigned long pfn)
 {
 	xen_alloc_ptpage(mm, pfn, PT_PTE);
 }
 
-static void xen_alloc_pmd(struct mm_struct *mm, u32 pfn)
+static void xen_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
 {
 	xen_alloc_ptpage(mm, pfn, PT_PMD);
 }
@@ -909,13 +928,13 @@ static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
 }
 
 /* This should never happen until we're OK to use struct page */
-static void xen_release_ptpage(u32 pfn, unsigned level)
+static void xen_release_ptpage(unsigned long pfn, unsigned level)
 {
 	struct page *page = pfn_to_page(pfn);
 
 	if (PagePinned(page)) {
 		if (!PageHighMem(page)) {
-			if (level == PT_PTE)
+			if (level == PT_PTE && USE_SPLIT_PTLOCKS)
 				pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
 			make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 		}
@@ -923,23 +942,23 @@ static void xen_release_ptpage(u32 pfn, unsigned level)
 	}
 }
 
-static void xen_release_pte(u32 pfn)
+static void xen_release_pte(unsigned long pfn)
 {
 	xen_release_ptpage(pfn, PT_PTE);
 }
 
-static void xen_release_pmd(u32 pfn)
+static void xen_release_pmd(unsigned long pfn)
 {
 	xen_release_ptpage(pfn, PT_PMD);
 }
 
 #if PAGETABLE_LEVELS == 4
-static void xen_alloc_pud(struct mm_struct *mm, u32 pfn)
+static void xen_alloc_pud(struct mm_struct *mm, unsigned long pfn)
 {
 	xen_alloc_ptpage(mm, pfn, PT_PUD);
 }
 
-static void xen_release_pud(u32 pfn)
+static void xen_release_pud(unsigned long pfn)
 {
 	xen_release_ptpage(pfn, PT_PUD);
 }
@@ -962,6 +981,7 @@ static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
 }
 #endif
 
+#ifdef CONFIG_X86_32
 static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
 {
 	/* If there's an existing pte, then don't allow _PAGE_RW to be set */
@@ -980,6 +1000,7 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
 
 	xen_set_pte(ptep, pte);
 }
+#endif
 
 static __init void xen_pagetable_setup_start(pgd_t *base)
 {
@@ -1046,7 +1067,6 @@ void xen_setup_vcpu_info_placement(void)
 
 	/* xen_vcpu_setup managed to place the vcpu_info within the
 	   percpu area for all cpus, so make use of it */
-#ifdef CONFIG_X86_32
 	if (have_vcpu_info_placement) {
 		printk(KERN_INFO "Xen: using vcpu_info placement\n");
 
@@ -1056,7 +1076,6 @@ void xen_setup_vcpu_info_placement(void)
 		pv_irq_ops.irq_enable = xen_irq_enable_direct;
 		pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
 	}
-#endif
 }
 
 static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
@@ -1077,12 +1096,10 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
 	goto patch_site
 
 	switch (type) {
-#ifdef CONFIG_X86_32
 		SITE(pv_irq_ops, irq_enable);
 		SITE(pv_irq_ops, irq_disable);
 		SITE(pv_irq_ops, save_fl);
 		SITE(pv_irq_ops, restore_fl);
-#endif /* CONFIG_X86_32 */
 #undef SITE
 
 	patch_site:
@@ -1220,6 +1237,9 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.load_gs_index = xen_load_gs_index,
 #endif
 
+	.alloc_ldt = xen_alloc_ldt,
+	.free_ldt = xen_free_ldt,
+
 	.store_gdt = native_store_gdt,
 	.store_idt = native_store_idt,
 	.store_tr = xen_store_tr,
@@ -1241,40 +1261,8 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	},
 };
 
-static void __init __xen_init_IRQ(void)
-{
-#ifdef CONFIG_X86_64
-	int i;
-
-	/* Create identity vector->irq map */
-	for(i = 0; i < NR_VECTORS; i++) {
-		int cpu;
-
-		for_each_possible_cpu(cpu)
-			per_cpu(vector_irq, cpu)[i] = i;
-	}
-#endif	/* CONFIG_X86_64 */
-
-	xen_init_IRQ();
-}
-
-static const struct pv_irq_ops xen_irq_ops __initdata = {
-	.init_IRQ = __xen_init_IRQ,
-	.save_fl = xen_save_fl,
-	.restore_fl = xen_restore_fl,
-	.irq_disable = xen_irq_disable,
-	.irq_enable = xen_irq_enable,
-	.safe_halt = xen_safe_halt,
-	.halt = xen_halt,
-#ifdef CONFIG_X86_64
-	.adjust_exception_frame = xen_adjust_exception_frame,
-#endif
-};
-
 static const struct pv_apic_ops xen_apic_ops __initdata = {
 #ifdef CONFIG_X86_LOCAL_APIC
-	.apic_write = xen_apic_write,
-	.apic_read = xen_apic_read,
 	.setup_boot_clock = paravirt_nop,
 	.setup_secondary_clock = paravirt_nop,
 	.startup_ipi_hook = paravirt_nop,
@@ -1413,7 +1401,7 @@ static void __init xen_reserve_top(void)
 	if (HYPERVISOR_xen_version(XENVER_platform_parameters, &pp) == 0)
 		top = pp.virt_start;
 
-	reserve_top_address(-top + 2 * PAGE_SIZE);
+	reserve_top_address(-top);
 #endif	/* CONFIG_X86_32 */
 }
 
@@ -1447,48 +1435,11 @@ static void *m2v(phys_addr_t maddr)
 	return __ka(m2p(maddr));
 }
 
-#ifdef CONFIG_X86_64
-static void walk(pgd_t *pgd, unsigned long addr)
-{
-	unsigned l4idx = pgd_index(addr);
-	unsigned l3idx = pud_index(addr);
-	unsigned l2idx = pmd_index(addr);
-	unsigned l1idx = pte_index(addr);
-	pgd_t l4;
-	pud_t l3;
-	pmd_t l2;
-	pte_t l1;
-
-	xen_raw_printk("walk %p, %lx -> %d %d %d %d\n",
-		       pgd, addr, l4idx, l3idx, l2idx, l1idx);
-
-	l4 = pgd[l4idx];
-	xen_raw_printk("  l4: %016lx\n", l4.pgd);
-	xen_raw_printk("      %016lx\n", pgd_val(l4));
-
-	l3 = ((pud_t *)(m2v(l4.pgd)))[l3idx];
-	xen_raw_printk("  l3: %016lx\n", l3.pud);
-	xen_raw_printk("      %016lx\n", pud_val(l3));
-
-	l2 = ((pmd_t *)(m2v(l3.pud)))[l2idx];
-	xen_raw_printk("  l2: %016lx\n", l2.pmd);
-	xen_raw_printk("      %016lx\n", pmd_val(l2));
-
-	l1 = ((pte_t *)(m2v(l2.pmd)))[l1idx];
-	xen_raw_printk("  l1: %016lx\n", l1.pte);
-	xen_raw_printk("      %016lx\n", pte_val(l1));
-}
-#endif
-
 static void set_page_prot(void *addr, pgprot_t prot)
 {
 	unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
 	pte_t pte = pfn_pte(pfn, prot);
 
-	xen_raw_printk("addr=%p pfn=%lx mfn=%lx prot=%016llx pte=%016llx\n",
-		       addr, pfn, get_phys_to_machine(pfn),
-		       pgprot_val(prot), pte.pte);
-
 	if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
 		BUG();
 }
@@ -1664,6 +1615,8 @@ asmlinkage void __init xen_start_kernel(void)
 	if (!xen_start_info)
 		return;
 
+	xen_domain_type = XEN_PV_DOMAIN;
+
 	BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
 
 	xen_setup_features();
@@ -1673,10 +1626,18 @@ asmlinkage void __init xen_start_kernel(void)
 	pv_init_ops = xen_init_ops;
 	pv_time_ops = xen_time_ops;
 	pv_cpu_ops = xen_cpu_ops;
-	pv_irq_ops = xen_irq_ops;
 	pv_apic_ops = xen_apic_ops;
 	pv_mmu_ops = xen_mmu_ops;
 
+	xen_init_irq_ops();
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	/*
+	 * set up the basic apic ops.
+	 */
+	apic_ops = &xen_basic_apic_ops;
+#endif
+
 	if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
 		pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
 		pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
@@ -1700,7 +1661,7 @@ asmlinkage void __init xen_start_kernel(void)
 
 	/* Prevent unwanted bits from being set in PTEs. */
 	__supported_pte_mask &= ~_PAGE_GLOBAL;
-	if (!is_initial_xendomain())
+	if (!xen_initial_domain())
 		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
 
 	/* Don't do the full vcpu_info placement stuff until we have a
@@ -1735,7 +1696,7 @@ asmlinkage void __init xen_start_kernel(void)
 	boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
 	boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
 
-	if (!is_initial_xendomain()) {
+	if (!xen_initial_domain()) {
 		add_preferred_console("xenboot", 0, NULL);
 		add_preferred_console("tty", 0, NULL);
 		add_preferred_console("hvc", 0, NULL);
@@ -1743,15 +1704,6 @@ asmlinkage void __init xen_start_kernel(void)
 
 	xen_raw_console_write("about to get started...\n");
 
-#if 0
-	xen_raw_printk("&boot_params=%p __pa(&boot_params)=%lx __va(__pa(&boot_params))=%lx\n",
-		       &boot_params, __pa_symbol(&boot_params),
-		       __va(__pa_symbol(&boot_params)));
-
-	walk(pgd, &boot_params);
-	walk(pgd, __va(__pa(&boot_params)));
-#endif
-
 	/* Start the world */
 #ifdef CONFIG_X86_32
 	i386_start_kernel();
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
new file mode 100644
index 0000000..bb04260
--- /dev/null
+++ b/arch/x86/xen/irq.c
@@ -0,0 +1,141 @@
+#include <linux/hardirq.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/sched.h>
+#include <xen/interface/vcpu.h>
+
+#include <asm/xen/hypercall.h>
+#include <asm/xen/hypervisor.h>
+
+#include "xen-ops.h"
+
+/*
+ * Force a proper event-channel callback from Xen after clearing the
+ * callback mask. We do this in a very simple manner, by making a call
+ * down into Xen. The pending flag will be checked by Xen on return.
+ */
+void xen_force_evtchn_callback(void)
+{
+	(void)HYPERVISOR_xen_version(0, NULL);
+}
+
+static void __init __xen_init_IRQ(void)
+{
+	int i;
+
+	/* Create identity vector->irq map */
+	for(i = 0; i < NR_VECTORS; i++) {
+		int cpu;
+
+		for_each_possible_cpu(cpu)
+			per_cpu(vector_irq, cpu)[i] = i;
+	}
+
+	xen_init_IRQ();
+}
+
+static unsigned long xen_save_fl(void)
+{
+	struct vcpu_info *vcpu;
+	unsigned long flags;
+
+	vcpu = x86_read_percpu(xen_vcpu);
+
+	/* flag has opposite sense of mask */
+	flags = !vcpu->evtchn_upcall_mask;
+
+	/* convert to IF type flag
+	   -0 -> 0x00000000
+	   -1 -> 0xffffffff
+	*/
+	return (-flags) & X86_EFLAGS_IF;
+}
+
+static void xen_restore_fl(unsigned long flags)
+{
+	struct vcpu_info *vcpu;
+
+	/* convert from IF type flag */
+	flags = !(flags & X86_EFLAGS_IF);
+
+	/* There's a one instruction preempt window here.  We need to
+	   make sure we're don't switch CPUs between getting the vcpu
+	   pointer and updating the mask. */
+	preempt_disable();
+	vcpu = x86_read_percpu(xen_vcpu);
+	vcpu->evtchn_upcall_mask = flags;
+	preempt_enable_no_resched();
+
+	/* Doesn't matter if we get preempted here, because any
+	   pending event will get dealt with anyway. */
+
+	if (flags == 0) {
+		preempt_check_resched();
+		barrier(); /* unmask then check (avoid races) */
+		if (unlikely(vcpu->evtchn_upcall_pending))
+			xen_force_evtchn_callback();
+	}
+}
+
+static void xen_irq_disable(void)
+{
+	/* There's a one instruction preempt window here.  We need to
+	   make sure we're don't switch CPUs between getting the vcpu
+	   pointer and updating the mask. */
+	preempt_disable();
+	x86_read_percpu(xen_vcpu)->evtchn_upcall_mask = 1;
+	preempt_enable_no_resched();
+}
+
+static void xen_irq_enable(void)
+{
+	struct vcpu_info *vcpu;
+
+	/* We don't need to worry about being preempted here, since
+	   either a) interrupts are disabled, so no preemption, or b)
+	   the caller is confused and is trying to re-enable interrupts
+	   on an indeterminate processor. */
+
+	vcpu = x86_read_percpu(xen_vcpu);
+	vcpu->evtchn_upcall_mask = 0;
+
+	/* Doesn't matter if we get preempted here, because any
+	   pending event will get dealt with anyway. */
+
+	barrier(); /* unmask then check (avoid races) */
+	if (unlikely(vcpu->evtchn_upcall_pending))
+		xen_force_evtchn_callback();
+}
+
+static void xen_safe_halt(void)
+{
+	/* Blocking includes an implicit local_irq_enable(). */
+	if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0)
+		BUG();
+}
+
+static void xen_halt(void)
+{
+	if (irqs_disabled())
+		HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
+	else
+		xen_safe_halt();
+}
+
+static const struct pv_irq_ops xen_irq_ops __initdata = {
+	.init_IRQ = __xen_init_IRQ,
+	.save_fl = xen_save_fl,
+	.restore_fl = xen_restore_fl,
+	.irq_disable = xen_irq_disable,
+	.irq_enable = xen_irq_enable,
+	.safe_halt = xen_safe_halt,
+	.halt = xen_halt,
+#ifdef CONFIG_X86_64
+	.adjust_exception_frame = xen_adjust_exception_frame,
+#endif
+};
+
+void __init xen_init_irq_ops()
+{
+	pv_irq_ops = xen_irq_ops;
+}
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index aa37469..d4d52f5 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -40,6 +40,7 @@
  */
 #include <linux/sched.h>
 #include <linux/highmem.h>
+#include <linux/debugfs.h>
 #include <linux/bug.h>
 
 #include <asm/pgtable.h>
@@ -57,6 +58,61 @@
 
 #include "multicalls.h"
 #include "mmu.h"
+#include "debugfs.h"
+
+#define MMU_UPDATE_HISTO	30
+
+#ifdef CONFIG_XEN_DEBUG_FS
+
+static struct {
+	u32 pgd_update;
+	u32 pgd_update_pinned;
+	u32 pgd_update_batched;
+
+	u32 pud_update;
+	u32 pud_update_pinned;
+	u32 pud_update_batched;
+
+	u32 pmd_update;
+	u32 pmd_update_pinned;
+	u32 pmd_update_batched;
+
+	u32 pte_update;
+	u32 pte_update_pinned;
+	u32 pte_update_batched;
+
+	u32 mmu_update;
+	u32 mmu_update_extended;
+	u32 mmu_update_histo[MMU_UPDATE_HISTO];
+
+	u32 prot_commit;
+	u32 prot_commit_batched;
+
+	u32 set_pte_at;
+	u32 set_pte_at_batched;
+	u32 set_pte_at_pinned;
+	u32 set_pte_at_current;
+	u32 set_pte_at_kernel;
+} mmu_stats;
+
+static u8 zero_stats;
+
+static inline void check_zero(void)
+{
+	if (unlikely(zero_stats)) {
+		memset(&mmu_stats, 0, sizeof(mmu_stats));
+		zero_stats = 0;
+	}
+}
+
+#define ADD_STATS(elem, val)			\
+	do { check_zero(); mmu_stats.elem += (val); } while(0)
+
+#else  /* !CONFIG_XEN_DEBUG_FS */
+
+#define ADD_STATS(elem, val)	do { (void)(val); } while(0)
+
+#endif /* CONFIG_XEN_DEBUG_FS */
 
 /*
  * Just beyond the highest usermode address.  STACK_TOP_MAX has a
@@ -229,25 +285,35 @@ void make_lowmem_page_readwrite(void *vaddr)
 }
 
 
-static bool page_pinned(void *ptr)
+static bool xen_page_pinned(void *ptr)
 {
 	struct page *page = virt_to_page(ptr);
 
 	return PagePinned(page);
 }
 
-static void extend_mmu_update(const struct mmu_update *update)
+static void xen_extend_mmu_update(const struct mmu_update *update)
 {
 	struct multicall_space mcs;
 	struct mmu_update *u;
 
 	mcs = xen_mc_extend_args(__HYPERVISOR_mmu_update, sizeof(*u));
 
-	if (mcs.mc != NULL)
+	if (mcs.mc != NULL) {
+		ADD_STATS(mmu_update_extended, 1);
+		ADD_STATS(mmu_update_histo[mcs.mc->args[1]], -1);
+
 		mcs.mc->args[1]++;
-	else {
+
+		if (mcs.mc->args[1] < MMU_UPDATE_HISTO)
+			ADD_STATS(mmu_update_histo[mcs.mc->args[1]], 1);
+		else
+			ADD_STATS(mmu_update_histo[0], 1);
+	} else {
+		ADD_STATS(mmu_update, 1);
 		mcs = __xen_mc_entry(sizeof(*u));
 		MULTI_mmu_update(mcs.mc, mcs.args, 1, NULL, DOMID_SELF);
+		ADD_STATS(mmu_update_histo[1], 1);
 	}
 
 	u = mcs.args;
@@ -265,7 +331,9 @@ void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val)
 	/* ptr may be ioremapped for 64-bit pagetable setup */
 	u.ptr = arbitrary_virt_to_machine(ptr).maddr;
 	u.val = pmd_val_ma(val);
-	extend_mmu_update(&u);
+	xen_extend_mmu_update(&u);
+
+	ADD_STATS(pmd_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
 
 	xen_mc_issue(PARAVIRT_LAZY_MMU);
 
@@ -274,13 +342,17 @@ void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val)
 
 void xen_set_pmd(pmd_t *ptr, pmd_t val)
 {
+	ADD_STATS(pmd_update, 1);
+
 	/* If page is not pinned, we can just update the entry
 	   directly */
-	if (!page_pinned(ptr)) {
+	if (!xen_page_pinned(ptr)) {
 		*ptr = val;
 		return;
 	}
 
+	ADD_STATS(pmd_update_pinned, 1);
+
 	xen_set_pmd_hyper(ptr, val);
 }
 
@@ -300,12 +372,18 @@ void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
 	if (mm == &init_mm)
 		preempt_disable();
 
+	ADD_STATS(set_pte_at, 1);
+//	ADD_STATS(set_pte_at_pinned, xen_page_pinned(ptep));
+	ADD_STATS(set_pte_at_current, mm == current->mm);
+	ADD_STATS(set_pte_at_kernel, mm == &init_mm);
+
 	if (mm == current->mm || mm == &init_mm) {
 		if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) {
 			struct multicall_space mcs;
 			mcs = xen_mc_entry(0);
 
 			MULTI_update_va_mapping(mcs.mc, addr, pteval, 0);
+			ADD_STATS(set_pte_at_batched, 1);
 			xen_mc_issue(PARAVIRT_LAZY_MMU);
 			goto out;
 		} else
@@ -334,7 +412,10 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 
 	u.ptr = virt_to_machine(ptep).maddr | MMU_PT_UPDATE_PRESERVE_AD;
 	u.val = pte_val_ma(pte);
-	extend_mmu_update(&u);
+	xen_extend_mmu_update(&u);
+
+	ADD_STATS(prot_commit, 1);
+	ADD_STATS(prot_commit_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
 
 	xen_mc_issue(PARAVIRT_LAZY_MMU);
 }
@@ -400,7 +481,9 @@ void xen_set_pud_hyper(pud_t *ptr, pud_t val)
 	/* ptr may be ioremapped for 64-bit pagetable setup */
 	u.ptr = arbitrary_virt_to_machine(ptr).maddr;
 	u.val = pud_val_ma(val);
-	extend_mmu_update(&u);
+	xen_extend_mmu_update(&u);
+
+	ADD_STATS(pud_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
 
 	xen_mc_issue(PARAVIRT_LAZY_MMU);
 
@@ -409,18 +492,26 @@ void xen_set_pud_hyper(pud_t *ptr, pud_t val)
 
 void xen_set_pud(pud_t *ptr, pud_t val)
 {
+	ADD_STATS(pud_update, 1);
+
 	/* If page is not pinned, we can just update the entry
 	   directly */
-	if (!page_pinned(ptr)) {
+	if (!xen_page_pinned(ptr)) {
 		*ptr = val;
 		return;
 	}
 
+	ADD_STATS(pud_update_pinned, 1);
+
 	xen_set_pud_hyper(ptr, val);
 }
 
 void xen_set_pte(pte_t *ptep, pte_t pte)
 {
+	ADD_STATS(pte_update, 1);
+//	ADD_STATS(pte_update_pinned, xen_page_pinned(ptep));
+	ADD_STATS(pte_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
+
 #ifdef CONFIG_X86_PAE
 	ptep->pte_high = pte.pte_high;
 	smp_wmb();
@@ -490,7 +581,7 @@ static void __xen_set_pgd_hyper(pgd_t *ptr, pgd_t val)
 
 	u.ptr = virt_to_machine(ptr).maddr;
 	u.val = pgd_val_ma(val);
-	extend_mmu_update(&u);
+	xen_extend_mmu_update(&u);
 }
 
 /*
@@ -517,17 +608,22 @@ void xen_set_pgd(pgd_t *ptr, pgd_t val)
 {
 	pgd_t *user_ptr = xen_get_user_pgd(ptr);
 
+	ADD_STATS(pgd_update, 1);
+
 	/* If page is not pinned, we can just update the entry
 	   directly */
-	if (!page_pinned(ptr)) {
+	if (!xen_page_pinned(ptr)) {
 		*ptr = val;
 		if (user_ptr) {
-			WARN_ON(page_pinned(user_ptr));
+			WARN_ON(xen_page_pinned(user_ptr));
 			*user_ptr = val;
 		}
 		return;
 	}
 
+	ADD_STATS(pgd_update_pinned, 1);
+	ADD_STATS(pgd_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
+
 	/* If it's pinned, then we can at least batch the kernel and
 	   user updates together. */
 	xen_mc_batch();
@@ -555,9 +651,12 @@ void xen_set_pgd(pgd_t *ptr, pgd_t val)
  * For 64-bit, we must skip the Xen hole in the middle of the address
  * space, just after the big x86-64 virtual hole.
  */
-static int pgd_walk(pgd_t *pgd, int (*func)(struct page *, enum pt_level),
-		    unsigned long limit)
+static int xen_pgd_walk(struct mm_struct *mm,
+			int (*func)(struct mm_struct *mm, struct page *,
+				    enum pt_level),
+			unsigned long limit)
 {
+	pgd_t *pgd = mm->pgd;
 	int flush = 0;
 	unsigned hole_low, hole_high;
 	unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
@@ -590,8 +689,6 @@ static int pgd_walk(pgd_t *pgd, int (*func)(struct page *, enum pt_level),
 	pmdidx_limit = 0;
 #endif
 
-	flush |= (*func)(virt_to_page(pgd), PT_PGD);
-
 	for (pgdidx = 0; pgdidx <= pgdidx_limit; pgdidx++) {
 		pud_t *pud;
 
@@ -604,7 +701,7 @@ static int pgd_walk(pgd_t *pgd, int (*func)(struct page *, enum pt_level),
 		pud = pud_offset(&pgd[pgdidx], 0);
 
 		if (PTRS_PER_PUD > 1) /* not folded */
-			flush |= (*func)(virt_to_page(pud), PT_PUD);
+			flush |= (*func)(mm, virt_to_page(pud), PT_PUD);
 
 		for (pudidx = 0; pudidx < PTRS_PER_PUD; pudidx++) {
 			pmd_t *pmd;
@@ -619,7 +716,7 @@ static int pgd_walk(pgd_t *pgd, int (*func)(struct page *, enum pt_level),
 			pmd = pmd_offset(&pud[pudidx], 0);
 
 			if (PTRS_PER_PMD > 1) /* not folded */
-				flush |= (*func)(virt_to_page(pmd), PT_PMD);
+				flush |= (*func)(mm, virt_to_page(pmd), PT_PMD);
 
 			for (pmdidx = 0; pmdidx < PTRS_PER_PMD; pmdidx++) {
 				struct page *pte;
@@ -633,28 +730,34 @@ static int pgd_walk(pgd_t *pgd, int (*func)(struct page *, enum pt_level),
 					continue;
 
 				pte = pmd_page(pmd[pmdidx]);
-				flush |= (*func)(pte, PT_PTE);
+				flush |= (*func)(mm, pte, PT_PTE);
 			}
 		}
 	}
+
 out:
+	/* Do the top level last, so that the callbacks can use it as
+	   a cue to do final things like tlb flushes. */
+	flush |= (*func)(mm, virt_to_page(pgd), PT_PGD);
 
 	return flush;
 }
 
-static spinlock_t *lock_pte(struct page *page)
+/* If we're using split pte locks, then take the page's lock and
+   return a pointer to it.  Otherwise return NULL. */
+static spinlock_t *xen_pte_lock(struct page *page, struct mm_struct *mm)
 {
 	spinlock_t *ptl = NULL;
 
-#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
+#if USE_SPLIT_PTLOCKS
 	ptl = __pte_lockptr(page);
-	spin_lock(ptl);
+	spin_lock_nest_lock(ptl, &mm->page_table_lock);
 #endif
 
 	return ptl;
 }
 
-static void do_unlock(void *v)
+static void xen_pte_unlock(void *v)
 {
 	spinlock_t *ptl = v;
 	spin_unlock(ptl);
@@ -672,7 +775,8 @@ static void xen_do_pin(unsigned level, unsigned long pfn)
 	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
 }
 
-static int pin_page(struct page *page, enum pt_level level)
+static int xen_pin_page(struct mm_struct *mm, struct page *page,
+			enum pt_level level)
 {
 	unsigned pgfl = TestSetPagePinned(page);
 	int flush;
@@ -691,21 +795,40 @@ static int pin_page(struct page *page, enum pt_level level)
 
 		flush = 0;
 
+		/*
+		 * We need to hold the pagetable lock between the time
+		 * we make the pagetable RO and when we actually pin
+		 * it.  If we don't, then other users may come in and
+		 * attempt to update the pagetable by writing it,
+		 * which will fail because the memory is RO but not
+		 * pinned, so Xen won't do the trap'n'emulate.
+		 *
+		 * If we're using split pte locks, we can't hold the
+		 * entire pagetable's worth of locks during the
+		 * traverse, because we may wrap the preempt count (8
+		 * bits).  The solution is to mark RO and pin each PTE
+		 * page while holding the lock.  This means the number
+		 * of locks we end up holding is never more than a
+		 * batch size (~32 entries, at present).
+		 *
+		 * If we're not using split pte locks, we needn't pin
+		 * the PTE pages independently, because we're
+		 * protected by the overall pagetable lock.
+		 */
 		ptl = NULL;
 		if (level == PT_PTE)
-			ptl = lock_pte(page);
+			ptl = xen_pte_lock(page, mm);
 
 		MULTI_update_va_mapping(mcs.mc, (unsigned long)pt,
 					pfn_pte(pfn, PAGE_KERNEL_RO),
 					level == PT_PGD ? UVMF_TLB_FLUSH : 0);
 
-		if (level == PT_PTE)
+		if (ptl) {
 			xen_do_pin(MMUEXT_PIN_L1_TABLE, pfn);
 
-		if (ptl) {
 			/* Queue a deferred unlock for when this batch
 			   is completed. */
-			xen_mc_callback(do_unlock, ptl);
+			xen_mc_callback(xen_pte_unlock, ptl);
 		}
 	}
 
@@ -715,14 +838,15 @@ static int pin_page(struct page *page, enum pt_level level)
 /* This is called just after a mm has been created, but it has not
    been used yet.  We need to make sure that its pagetable is all
    read-only, and can be pinned. */
-void xen_pgd_pin(pgd_t *pgd)
+static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd)
 {
 	xen_mc_batch();
 
-	if (pgd_walk(pgd, pin_page, USER_LIMIT)) {
+	if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) {
 		/* re-enable interrupts for kmap_flush_unused */
 		xen_mc_issue(0);
 		kmap_flush_unused();
+		vm_unmap_aliases();
 		xen_mc_batch();
 	}
 
@@ -733,25 +857,35 @@ void xen_pgd_pin(pgd_t *pgd)
 		xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(pgd)));
 
 		if (user_pgd) {
-			pin_page(virt_to_page(user_pgd), PT_PGD);
+			xen_pin_page(mm, virt_to_page(user_pgd), PT_PGD);
 			xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(user_pgd)));
 		}
 	}
 #else /* CONFIG_X86_32 */
 #ifdef CONFIG_X86_PAE
 	/* Need to make sure unshared kernel PMD is pinnable */
-	pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+	xen_pin_page(mm, virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])),
+		     PT_PMD);
 #endif
 	xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd)));
 #endif /* CONFIG_X86_64 */
 	xen_mc_issue(0);
 }
 
+static void xen_pgd_pin(struct mm_struct *mm)
+{
+	__xen_pgd_pin(mm, mm->pgd);
+}
+
 /*
  * On save, we need to pin all pagetables to make sure they get their
  * mfns turned into pfns.  Search the list for any unpinned pgds and pin
  * them (unpinned pgds are not currently in use, probably because the
  * process is under construction or destruction).
+ *
+ * Expected to be called in stop_machine() ("equivalent to taking
+ * every spinlock in the system"), so the locking doesn't really
+ * matter all that much.
  */
 void xen_mm_pin_all(void)
 {
@@ -762,7 +896,7 @@ void xen_mm_pin_all(void)
 
 	list_for_each_entry(page, &pgd_list, lru) {
 		if (!PagePinned(page)) {
-			xen_pgd_pin((pgd_t *)page_address(page));
+			__xen_pgd_pin(&init_mm, (pgd_t *)page_address(page));
 			SetPageSavePinned(page);
 		}
 	}
@@ -775,7 +909,8 @@ void xen_mm_pin_all(void)
  * that's before we have page structures to store the bits.  So do all
  * the book-keeping now.
  */
-static __init int mark_pinned(struct page *page, enum pt_level level)
+static __init int xen_mark_pinned(struct mm_struct *mm, struct page *page,
+				  enum pt_level level)
 {
 	SetPagePinned(page);
 	return 0;
@@ -783,10 +918,11 @@ static __init int mark_pinned(struct page *page, enum pt_level level)
 
 void __init xen_mark_init_mm_pinned(void)
 {
-	pgd_walk(init_mm.pgd, mark_pinned, FIXADDR_TOP);
+	xen_pgd_walk(&init_mm, xen_mark_pinned, FIXADDR_TOP);
 }
 
-static int unpin_page(struct page *page, enum pt_level level)
+static int xen_unpin_page(struct mm_struct *mm, struct page *page,
+			  enum pt_level level)
 {
 	unsigned pgfl = TestClearPagePinned(page);
 
@@ -796,10 +932,18 @@ static int unpin_page(struct page *page, enum pt_level level)
 		spinlock_t *ptl = NULL;
 		struct multicall_space mcs;
 
+		/*
+		 * Do the converse to pin_page.  If we're using split
+		 * pte locks, we must be holding the lock for while
+		 * the pte page is unpinned but still RO to prevent
+		 * concurrent updates from seeing it in this
+		 * partially-pinned state.
+		 */
 		if (level == PT_PTE) {
-			ptl = lock_pte(page);
+			ptl = xen_pte_lock(page, mm);
 
-			xen_do_pin(MMUEXT_UNPIN_TABLE, pfn);
+			if (ptl)
+				xen_do_pin(MMUEXT_UNPIN_TABLE, pfn);
 		}
 
 		mcs = __xen_mc_entry(0);
@@ -810,7 +954,7 @@ static int unpin_page(struct page *page, enum pt_level level)
 
 		if (ptl) {
 			/* unlock when batch completed */
-			xen_mc_callback(do_unlock, ptl);
+			xen_mc_callback(xen_pte_unlock, ptl);
 		}
 	}
 
@@ -818,7 +962,7 @@ static int unpin_page(struct page *page, enum pt_level level)
 }
 
 /* Release a pagetables pages back as normal RW */
-static void xen_pgd_unpin(pgd_t *pgd)
+static void __xen_pgd_unpin(struct mm_struct *mm, pgd_t *pgd)
 {
 	xen_mc_batch();
 
@@ -830,21 +974,27 @@ static void xen_pgd_unpin(pgd_t *pgd)
 
 		if (user_pgd) {
 			xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(user_pgd)));
-			unpin_page(virt_to_page(user_pgd), PT_PGD);
+			xen_unpin_page(mm, virt_to_page(user_pgd), PT_PGD);
 		}
 	}
 #endif
 
 #ifdef CONFIG_X86_PAE
 	/* Need to make sure unshared kernel PMD is unpinned */
-	pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+	xen_unpin_page(mm, virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])),
+		       PT_PMD);
 #endif
 
-	pgd_walk(pgd, unpin_page, USER_LIMIT);
+	xen_pgd_walk(mm, xen_unpin_page, USER_LIMIT);
 
 	xen_mc_issue(0);
 }
 
+static void xen_pgd_unpin(struct mm_struct *mm)
+{
+	__xen_pgd_unpin(mm, mm->pgd);
+}
+
 /*
  * On resume, undo any pinning done at save, so that the rest of the
  * kernel doesn't see any unexpected pinned pagetables.
@@ -859,7 +1009,7 @@ void xen_mm_unpin_all(void)
 	list_for_each_entry(page, &pgd_list, lru) {
 		if (PageSavePinned(page)) {
 			BUG_ON(!PagePinned(page));
-			xen_pgd_unpin((pgd_t *)page_address(page));
+			__xen_pgd_unpin(&init_mm, (pgd_t *)page_address(page));
 			ClearPageSavePinned(page);
 		}
 	}
@@ -870,14 +1020,14 @@ void xen_mm_unpin_all(void)
 void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next)
 {
 	spin_lock(&next->page_table_lock);
-	xen_pgd_pin(next->pgd);
+	xen_pgd_pin(next);
 	spin_unlock(&next->page_table_lock);
 }
 
 void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm)
 {
 	spin_lock(&mm->page_table_lock);
-	xen_pgd_pin(mm->pgd);
+	xen_pgd_pin(mm);
 	spin_unlock(&mm->page_table_lock);
 }
 
@@ -907,7 +1057,7 @@ static void drop_other_mm_ref(void *info)
 	}
 }
 
-static void drop_mm_ref(struct mm_struct *mm)
+static void xen_drop_mm_ref(struct mm_struct *mm)
 {
 	cpumask_t mask;
 	unsigned cpu;
@@ -937,7 +1087,7 @@ static void drop_mm_ref(struct mm_struct *mm)
 		smp_call_function_mask(mask, drop_other_mm_ref, mm, 1);
 }
 #else
-static void drop_mm_ref(struct mm_struct *mm)
+static void xen_drop_mm_ref(struct mm_struct *mm)
 {
 	if (current->active_mm == mm)
 		load_cr3(swapper_pg_dir);
@@ -961,14 +1111,77 @@ static void drop_mm_ref(struct mm_struct *mm)
 void xen_exit_mmap(struct mm_struct *mm)
 {
 	get_cpu();		/* make sure we don't move around */
-	drop_mm_ref(mm);
+	xen_drop_mm_ref(mm);
 	put_cpu();
 
 	spin_lock(&mm->page_table_lock);
 
 	/* pgd may not be pinned in the error exit path of execve */
-	if (page_pinned(mm->pgd))
-		xen_pgd_unpin(mm->pgd);
+	if (xen_page_pinned(mm->pgd))
+		xen_pgd_unpin(mm);
 
 	spin_unlock(&mm->page_table_lock);
 }
+
+#ifdef CONFIG_XEN_DEBUG_FS
+
+static struct dentry *d_mmu_debug;
+
+static int __init xen_mmu_debugfs(void)
+{
+	struct dentry *d_xen = xen_init_debugfs();
+
+	if (d_xen == NULL)
+		return -ENOMEM;
+
+	d_mmu_debug = debugfs_create_dir("mmu", d_xen);
+
+	debugfs_create_u8("zero_stats", 0644, d_mmu_debug, &zero_stats);
+
+	debugfs_create_u32("pgd_update", 0444, d_mmu_debug, &mmu_stats.pgd_update);
+	debugfs_create_u32("pgd_update_pinned", 0444, d_mmu_debug,
+			   &mmu_stats.pgd_update_pinned);
+	debugfs_create_u32("pgd_update_batched", 0444, d_mmu_debug,
+			   &mmu_stats.pgd_update_pinned);
+
+	debugfs_create_u32("pud_update", 0444, d_mmu_debug, &mmu_stats.pud_update);
+	debugfs_create_u32("pud_update_pinned", 0444, d_mmu_debug,
+			   &mmu_stats.pud_update_pinned);
+	debugfs_create_u32("pud_update_batched", 0444, d_mmu_debug,
+			   &mmu_stats.pud_update_pinned);
+
+	debugfs_create_u32("pmd_update", 0444, d_mmu_debug, &mmu_stats.pmd_update);
+	debugfs_create_u32("pmd_update_pinned", 0444, d_mmu_debug,
+			   &mmu_stats.pmd_update_pinned);
+	debugfs_create_u32("pmd_update_batched", 0444, d_mmu_debug,
+			   &mmu_stats.pmd_update_pinned);
+
+	debugfs_create_u32("pte_update", 0444, d_mmu_debug, &mmu_stats.pte_update);
+//	debugfs_create_u32("pte_update_pinned", 0444, d_mmu_debug,
+//			   &mmu_stats.pte_update_pinned);
+	debugfs_create_u32("pte_update_batched", 0444, d_mmu_debug,
+			   &mmu_stats.pte_update_pinned);
+
+	debugfs_create_u32("mmu_update", 0444, d_mmu_debug, &mmu_stats.mmu_update);
+	debugfs_create_u32("mmu_update_extended", 0444, d_mmu_debug,
+			   &mmu_stats.mmu_update_extended);
+	xen_debugfs_create_u32_array("mmu_update_histo", 0444, d_mmu_debug,
+				     mmu_stats.mmu_update_histo, 20);
+
+	debugfs_create_u32("set_pte_at", 0444, d_mmu_debug, &mmu_stats.set_pte_at);
+	debugfs_create_u32("set_pte_at_batched", 0444, d_mmu_debug,
+			   &mmu_stats.set_pte_at_batched);
+	debugfs_create_u32("set_pte_at_current", 0444, d_mmu_debug,
+			   &mmu_stats.set_pte_at_current);
+	debugfs_create_u32("set_pte_at_kernel", 0444, d_mmu_debug,
+			   &mmu_stats.set_pte_at_kernel);
+
+	debugfs_create_u32("prot_commit", 0444, d_mmu_debug, &mmu_stats.prot_commit);
+	debugfs_create_u32("prot_commit_batched", 0444, d_mmu_debug,
+			   &mmu_stats.prot_commit_batched);
+
+	return 0;
+}
+fs_initcall(xen_mmu_debugfs);
+
+#endif	/* CONFIG_XEN_DEBUG_FS */
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index 0f59bd0..98d7165 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -18,9 +18,6 @@ void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next);
 void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm);
 void xen_exit_mmap(struct mm_struct *mm);
 
-void xen_pgd_pin(pgd_t *pgd);
-//void xen_pgd_unpin(pgd_t *pgd);
-
 pteval_t xen_pte_val(pte_t);
 pmdval_t xen_pmd_val(pmd_t);
 pgdval_t xen_pgd_val(pgd_t);
diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 9efd1c6..8ea8a0d 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -21,16 +21,20 @@
  */
 #include <linux/percpu.h>
 #include <linux/hardirq.h>
+#include <linux/debugfs.h>
 
 #include <asm/xen/hypercall.h>
 
 #include "multicalls.h"
+#include "debugfs.h"
+
+#define MC_BATCH	32
 
 #define MC_DEBUG	1
 
-#define MC_BATCH	32
 #define MC_ARGS		(MC_BATCH * 16)
 
+
 struct mc_buffer {
 	struct multicall_entry entries[MC_BATCH];
 #if MC_DEBUG
@@ -47,6 +51,76 @@ struct mc_buffer {
 static DEFINE_PER_CPU(struct mc_buffer, mc_buffer);
 DEFINE_PER_CPU(unsigned long, xen_mc_irq_flags);
 
+/* flush reasons 0- slots, 1- args, 2- callbacks */
+enum flush_reasons
+{
+	FL_SLOTS,
+	FL_ARGS,
+	FL_CALLBACKS,
+
+	FL_N_REASONS
+};
+
+#ifdef CONFIG_XEN_DEBUG_FS
+#define NHYPERCALLS	40		/* not really */
+
+static struct {
+	unsigned histo[MC_BATCH+1];
+
+	unsigned issued;
+	unsigned arg_total;
+	unsigned hypercalls;
+	unsigned histo_hypercalls[NHYPERCALLS];
+
+	unsigned flush[FL_N_REASONS];
+} mc_stats;
+
+static u8 zero_stats;
+
+static inline void check_zero(void)
+{
+	if (unlikely(zero_stats)) {
+		memset(&mc_stats, 0, sizeof(mc_stats));
+		zero_stats = 0;
+	}
+}
+
+static void mc_add_stats(const struct mc_buffer *mc)
+{
+	int i;
+
+	check_zero();
+
+	mc_stats.issued++;
+	mc_stats.hypercalls += mc->mcidx;
+	mc_stats.arg_total += mc->argidx;
+
+	mc_stats.histo[mc->mcidx]++;
+	for(i = 0; i < mc->mcidx; i++) {
+		unsigned op = mc->entries[i].op;
+		if (op < NHYPERCALLS)
+			mc_stats.histo_hypercalls[op]++;
+	}
+}
+
+static void mc_stats_flush(enum flush_reasons idx)
+{
+	check_zero();
+
+	mc_stats.flush[idx]++;
+}
+
+#else  /* !CONFIG_XEN_DEBUG_FS */
+
+static inline void mc_add_stats(const struct mc_buffer *mc)
+{
+}
+
+static inline void mc_stats_flush(enum flush_reasons idx)
+{
+}
+#endif	/* CONFIG_XEN_DEBUG_FS */
+
 void xen_mc_flush(void)
 {
 	struct mc_buffer *b = &__get_cpu_var(mc_buffer);
@@ -60,6 +134,8 @@ void xen_mc_flush(void)
 	   something in the middle */
 	local_irq_save(flags);
 
+	mc_add_stats(b);
+
 	if (b->mcidx) {
 #if MC_DEBUG
 		memcpy(b->debug, b->entries,
@@ -115,6 +191,7 @@ struct multicall_space __xen_mc_entry(size_t args)
 
 	if (b->mcidx == MC_BATCH ||
 	    (argidx + args) > MC_ARGS) {
+		mc_stats_flush(b->mcidx == MC_BATCH ? FL_SLOTS : FL_ARGS);
 		xen_mc_flush();
 		argidx = roundup(b->argidx, sizeof(u64));
 	}
@@ -158,10 +235,44 @@ void xen_mc_callback(void (*fn)(void *), void *data)
 	struct mc_buffer *b = &__get_cpu_var(mc_buffer);
 	struct callback *cb;
 
-	if (b->cbidx == MC_BATCH)
+	if (b->cbidx == MC_BATCH) {
+		mc_stats_flush(FL_CALLBACKS);
 		xen_mc_flush();
+	}
 
 	cb = &b->callbacks[b->cbidx++];
 	cb->fn = fn;
 	cb->data = data;
 }
+
+#ifdef CONFIG_XEN_DEBUG_FS
+
+static struct dentry *d_mc_debug;
+
+static int __init xen_mc_debugfs(void)
+{
+	struct dentry *d_xen = xen_init_debugfs();
+
+	if (d_xen == NULL)
+		return -ENOMEM;
+
+	d_mc_debug = debugfs_create_dir("multicalls", d_xen);
+
+	debugfs_create_u8("zero_stats", 0644, d_mc_debug, &zero_stats);
+
+	debugfs_create_u32("batches", 0444, d_mc_debug, &mc_stats.issued);
+	debugfs_create_u32("hypercalls", 0444, d_mc_debug, &mc_stats.hypercalls);
+	debugfs_create_u32("arg_total", 0444, d_mc_debug, &mc_stats.arg_total);
+
+	xen_debugfs_create_u32_array("batch_histo", 0444, d_mc_debug,
+				     mc_stats.histo, MC_BATCH);
+	xen_debugfs_create_u32_array("hypercall_histo", 0444, d_mc_debug,
+				     mc_stats.histo_hypercalls, NHYPERCALLS);
+	xen_debugfs_create_u32_array("flush_reasons", 0444, d_mc_debug,
+				     mc_stats.flush, FL_N_REASONS);
+
+	return 0;
+}
+fs_initcall(xen_mc_debugfs);
+
+#endif	/* CONFIG_XEN_DEBUG_FS */
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index d8faf79..d77da61 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -11,11 +11,8 @@
  * useful topology information for the kernel to make use of.  As a
  * result, all CPUs are treated as if they're single-core and
  * single-threaded.
- *
- * This does not handle HOTPLUG_CPU yet.
  */
 #include <linux/sched.h>
-#include <linux/kernel_stat.h>
 #include <linux/err.h>
 #include <linux/smp.h>
 
@@ -36,8 +33,6 @@
 #include "xen-ops.h"
 #include "mmu.h"
 
-static void __cpuinit xen_init_lock_cpu(int cpu);
-
 cpumask_t xen_cpu_initialized_map;
 
 static DEFINE_PER_CPU(int, resched_irq);
@@ -64,11 +59,12 @@ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static __cpuinit void cpu_bringup_and_idle(void)
+static __cpuinit void cpu_bringup(void)
 {
 	int cpu = smp_processor_id();
 
 	cpu_init();
+	touch_softlockup_watchdog();
 	preempt_disable();
 
 	xen_enable_sysenter();
@@ -89,6 +85,11 @@ static __cpuinit void cpu_bringup_and_idle(void)
 	local_irq_enable();
 
 	wmb();			/* make sure everything is out */
+}
+
+static __cpuinit void cpu_bringup_and_idle(void)
+{
+	cpu_bringup();
 	cpu_idle();
 }
 
@@ -212,8 +213,6 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
 
 		cpu_set(cpu, cpu_present_map);
 	}
-
-	//init_xenbus_allowed_cpumask();
 }
 
 static __cpuinit int
@@ -281,12 +280,6 @@ static int __cpuinit xen_cpu_up(unsigned int cpu)
 	struct task_struct *idle = idle_task(cpu);
 	int rc;
 
-#if 0
-	rc = cpu_up_check(cpu);
-	if (rc)
-		return rc;
-#endif
-
 #ifdef CONFIG_X86_64
 	/* Allocate node local memory for AP pdas */
 	WARN_ON(cpu == 0);
@@ -339,6 +332,60 @@ static void xen_smp_cpus_done(unsigned int max_cpus)
 {
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static int xen_cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+	if (cpu == 0)
+		return -EBUSY;
+
+	cpu_disable_common();
+
+	load_cr3(swapper_pg_dir);
+	return 0;
+}
+
+static void xen_cpu_die(unsigned int cpu)
+{
+	while (HYPERVISOR_vcpu_op(VCPUOP_is_up, cpu, NULL)) {
+		current->state = TASK_UNINTERRUPTIBLE;
+		schedule_timeout(HZ/10);
+	}
+	unbind_from_irqhandler(per_cpu(resched_irq, cpu), NULL);
+	unbind_from_irqhandler(per_cpu(callfunc_irq, cpu), NULL);
+	unbind_from_irqhandler(per_cpu(debug_irq, cpu), NULL);
+	unbind_from_irqhandler(per_cpu(callfuncsingle_irq, cpu), NULL);
+	xen_uninit_lock_cpu(cpu);
+	xen_teardown_timer(cpu);
+
+	if (num_online_cpus() == 1)
+		alternatives_smp_switch(0);
+}
+
+static void xen_play_dead(void)
+{
+	play_dead_common();
+	HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
+	cpu_bringup();
+}
+
+#else /* !CONFIG_HOTPLUG_CPU */
+static int xen_cpu_disable(void)
+{
+	return -ENOSYS;
+}
+
+static void xen_cpu_die(unsigned int cpu)
+{
+	BUG();
+}
+
+static void xen_play_dead(void)
+{
+	BUG();
+}
+
+#endif
 static void stop_self(void *v)
 {
 	int cpu = smp_processor_id();
@@ -419,176 +466,16 @@ static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-struct xen_spinlock {
-	unsigned char lock;		/* 0 -> free; 1 -> locked */
-	unsigned short spinners;	/* count of waiting cpus */
-};
-
-static int xen_spin_is_locked(struct raw_spinlock *lock)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-
-	return xl->lock != 0;
-}
-
-static int xen_spin_is_contended(struct raw_spinlock *lock)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-
-	/* Not strictly true; this is only the count of contended
-	   lock-takers entering the slow path. */
-	return xl->spinners != 0;
-}
-
-static int xen_spin_trylock(struct raw_spinlock *lock)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-	u8 old = 1;
-
-	asm("xchgb %b0,%1"
-	    : "+q" (old), "+m" (xl->lock) : : "memory");
-
-	return old == 0;
-}
-
-static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
-static DEFINE_PER_CPU(struct xen_spinlock *, lock_spinners);
-
-static inline void spinning_lock(struct xen_spinlock *xl)
-{
-	__get_cpu_var(lock_spinners) = xl;
-	wmb();			/* set lock of interest before count */
-	asm(LOCK_PREFIX " incw %0"
-	    : "+m" (xl->spinners) : : "memory");
-}
-
-static inline void unspinning_lock(struct xen_spinlock *xl)
-{
-	asm(LOCK_PREFIX " decw %0"
-	    : "+m" (xl->spinners) : : "memory");
-	wmb();			/* decrement count before clearing lock */
-	__get_cpu_var(lock_spinners) = NULL;
-}
-
-static noinline int xen_spin_lock_slow(struct raw_spinlock *lock)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-	int irq = __get_cpu_var(lock_kicker_irq);
-	int ret;
-
-	/* If kicker interrupts not initialized yet, just spin */
-	if (irq == -1)
-		return 0;
-
-	/* announce we're spinning */
-	spinning_lock(xl);
-
-	/* clear pending */
-	xen_clear_irq_pending(irq);
-
-	/* check again make sure it didn't become free while
-	   we weren't looking  */
-	ret = xen_spin_trylock(lock);
-	if (ret)
-		goto out;
-
-	/* block until irq becomes pending */
-	xen_poll_irq(irq);
-	kstat_this_cpu.irqs[irq]++;
-
-out:
-	unspinning_lock(xl);
-	return ret;
-}
-
-static void xen_spin_lock(struct raw_spinlock *lock)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-	int timeout;
-	u8 oldval;
-
-	do {
-		timeout = 1 << 10;
-
-		asm("1: xchgb %1,%0\n"
-		    "   testb %1,%1\n"
-		    "   jz 3f\n"
-		    "2: rep;nop\n"
-		    "   cmpb $0,%0\n"
-		    "   je 1b\n"
-		    "   dec %2\n"
-		    "   jnz 2b\n"
-		    "3:\n"
-		    : "+m" (xl->lock), "=q" (oldval), "+r" (timeout)
-		    : "1" (1)
-		    : "memory");
-
-	} while (unlikely(oldval != 0 && !xen_spin_lock_slow(lock)));
-}
-
-static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
-{
-	int cpu;
-
-	for_each_online_cpu(cpu) {
-		/* XXX should mix up next cpu selection */
-		if (per_cpu(lock_spinners, cpu) == xl) {
-			xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
-			break;
-		}
-	}
-}
-
-static void xen_spin_unlock(struct raw_spinlock *lock)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-
-	smp_wmb();		/* make sure no writes get moved after unlock */
-	xl->lock = 0;		/* release lock */
-
-	/* make sure unlock happens before kick */
-	barrier();
-
-	if (unlikely(xl->spinners))
-		xen_spin_unlock_slow(xl);
-}
-
-static __cpuinit void xen_init_lock_cpu(int cpu)
-{
-	int irq;
-	const char *name;
-
-	name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
-	irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
-				     cpu,
-				     xen_reschedule_interrupt,
-				     IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
-				     name,
-				     NULL);
-
-	if (irq >= 0) {
-		disable_irq(irq); /* make sure it's never delivered */
-		per_cpu(lock_kicker_irq, cpu) = irq;
-	}
-
-	printk("cpu %d spinlock event irq %d\n", cpu, irq);
-}
-
-static void __init xen_init_spinlocks(void)
-{
-	pv_lock_ops.spin_is_locked = xen_spin_is_locked;
-	pv_lock_ops.spin_is_contended = xen_spin_is_contended;
-	pv_lock_ops.spin_lock = xen_spin_lock;
-	pv_lock_ops.spin_trylock = xen_spin_trylock;
-	pv_lock_ops.spin_unlock = xen_spin_unlock;
-}
-
 static const struct smp_ops xen_smp_ops __initdata = {
 	.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
 	.smp_prepare_cpus = xen_smp_prepare_cpus,
-	.cpu_up = xen_cpu_up,
 	.smp_cpus_done = xen_smp_cpus_done,
 
+	.cpu_up = xen_cpu_up,
+	.cpu_die = xen_cpu_die,
+	.cpu_disable = xen_cpu_disable,
+	.play_dead = xen_play_dead,
+
 	.smp_send_stop = xen_smp_send_stop,
 	.smp_send_reschedule = xen_smp_send_reschedule,
 
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
new file mode 100644
index 0000000..5601506
--- /dev/null
+++ b/arch/x86/xen/spinlock.c
@@ -0,0 +1,428 @@
+/*
+ * Split spinlock implementation out into its own file, so it can be
+ * compiled in a FTRACE-compatible way.
+ */
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/log2.h>
+
+#include <asm/paravirt.h>
+
+#include <xen/interface/xen.h>
+#include <xen/events.h>
+
+#include "xen-ops.h"
+#include "debugfs.h"
+
+#ifdef CONFIG_XEN_DEBUG_FS
+static struct xen_spinlock_stats
+{
+	u64 taken;
+	u32 taken_slow;
+	u32 taken_slow_nested;
+	u32 taken_slow_pickup;
+	u32 taken_slow_spurious;
+	u32 taken_slow_irqenable;
+
+	u64 released;
+	u32 released_slow;
+	u32 released_slow_kicked;
+
+#define HISTO_BUCKETS	30
+	u32 histo_spin_total[HISTO_BUCKETS+1];
+	u32 histo_spin_spinning[HISTO_BUCKETS+1];
+	u32 histo_spin_blocked[HISTO_BUCKETS+1];
+
+	u64 time_total;
+	u64 time_spinning;
+	u64 time_blocked;
+} spinlock_stats;
+
+static u8 zero_stats;
+
+static unsigned lock_timeout = 1 << 10;
+#define TIMEOUT lock_timeout
+
+static inline void check_zero(void)
+{
+	if (unlikely(zero_stats)) {
+		memset(&spinlock_stats, 0, sizeof(spinlock_stats));
+		zero_stats = 0;
+	}
+}
+
+#define ADD_STATS(elem, val)			\
+	do { check_zero(); spinlock_stats.elem += (val); } while(0)
+
+static inline u64 spin_time_start(void)
+{
+	return xen_clocksource_read();
+}
+
+static void __spin_time_accum(u64 delta, u32 *array)
+{
+	unsigned index = ilog2(delta);
+
+	check_zero();
+
+	if (index < HISTO_BUCKETS)
+		array[index]++;
+	else
+		array[HISTO_BUCKETS]++;
+}
+
+static inline void spin_time_accum_spinning(u64 start)
+{
+	u32 delta = xen_clocksource_read() - start;
+
+	__spin_time_accum(delta, spinlock_stats.histo_spin_spinning);
+	spinlock_stats.time_spinning += delta;
+}
+
+static inline void spin_time_accum_total(u64 start)
+{
+	u32 delta = xen_clocksource_read() - start;
+
+	__spin_time_accum(delta, spinlock_stats.histo_spin_total);
+	spinlock_stats.time_total += delta;
+}
+
+static inline void spin_time_accum_blocked(u64 start)
+{
+	u32 delta = xen_clocksource_read() - start;
+
+	__spin_time_accum(delta, spinlock_stats.histo_spin_blocked);
+	spinlock_stats.time_blocked += delta;
+}
+#else  /* !CONFIG_XEN_DEBUG_FS */
+#define TIMEOUT			(1 << 10)
+#define ADD_STATS(elem, val)	do { (void)(val); } while(0)
+
+static inline u64 spin_time_start(void)
+{
+	return 0;
+}
+
+static inline void spin_time_accum_total(u64 start)
+{
+}
+static inline void spin_time_accum_spinning(u64 start)
+{
+}
+static inline void spin_time_accum_blocked(u64 start)
+{
+}
+#endif  /* CONFIG_XEN_DEBUG_FS */
+
+struct xen_spinlock {
+	unsigned char lock;		/* 0 -> free; 1 -> locked */
+	unsigned short spinners;	/* count of waiting cpus */
+};
+
+static int xen_spin_is_locked(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+	return xl->lock != 0;
+}
+
+static int xen_spin_is_contended(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+	/* Not strictly true; this is only the count of contended
+	   lock-takers entering the slow path. */
+	return xl->spinners != 0;
+}
+
+static int xen_spin_trylock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	u8 old = 1;
+
+	asm("xchgb %b0,%1"
+	    : "+q" (old), "+m" (xl->lock) : : "memory");
+
+	return old == 0;
+}
+
+static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
+static DEFINE_PER_CPU(struct xen_spinlock *, lock_spinners);
+
+/*
+ * Mark a cpu as interested in a lock.  Returns the CPU's previous
+ * lock of interest, in case we got preempted by an interrupt.
+ */
+static inline struct xen_spinlock *spinning_lock(struct xen_spinlock *xl)
+{
+	struct xen_spinlock *prev;
+
+	prev = __get_cpu_var(lock_spinners);
+	__get_cpu_var(lock_spinners) = xl;
+
+	wmb();			/* set lock of interest before count */
+
+	asm(LOCK_PREFIX " incw %0"
+	    : "+m" (xl->spinners) : : "memory");
+
+	return prev;
+}
+
+/*
+ * Mark a cpu as no longer interested in a lock.  Restores previous
+ * lock of interest (NULL for none).
+ */
+static inline void unspinning_lock(struct xen_spinlock *xl, struct xen_spinlock *prev)
+{
+	asm(LOCK_PREFIX " decw %0"
+	    : "+m" (xl->spinners) : : "memory");
+	wmb();			/* decrement count before restoring lock */
+	__get_cpu_var(lock_spinners) = prev;
+}
+
+static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enable)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	struct xen_spinlock *prev;
+	int irq = __get_cpu_var(lock_kicker_irq);
+	int ret;
+	unsigned long flags;
+	u64 start;
+
+	/* If kicker interrupts not initialized yet, just spin */
+	if (irq == -1)
+		return 0;
+
+	start = spin_time_start();
+
+	/* announce we're spinning */
+	prev = spinning_lock(xl);
+
+	flags = __raw_local_save_flags();
+	if (irq_enable) {
+		ADD_STATS(taken_slow_irqenable, 1);
+		raw_local_irq_enable();
+	}
+
+	ADD_STATS(taken_slow, 1);
+	ADD_STATS(taken_slow_nested, prev != NULL);
+
+	do {
+		/* clear pending */
+		xen_clear_irq_pending(irq);
+
+		/* check again make sure it didn't become free while
+		   we weren't looking  */
+		ret = xen_spin_trylock(lock);
+		if (ret) {
+			ADD_STATS(taken_slow_pickup, 1);
+
+			/*
+			 * If we interrupted another spinlock while it
+			 * was blocking, make sure it doesn't block
+			 * without rechecking the lock.
+			 */
+			if (prev != NULL)
+				xen_set_irq_pending(irq);
+			goto out;
+		}
+
+		/*
+		 * Block until irq becomes pending.  If we're
+		 * interrupted at this point (after the trylock but
+		 * before entering the block), then the nested lock
+		 * handler guarantees that the irq will be left
+		 * pending if there's any chance the lock became free;
+		 * xen_poll_irq() returns immediately if the irq is
+		 * pending.
+		 */
+		xen_poll_irq(irq);
+		ADD_STATS(taken_slow_spurious, !xen_test_irq_pending(irq));
+	} while (!xen_test_irq_pending(irq)); /* check for spurious wakeups */
+
+	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
+
+out:
+	raw_local_irq_restore(flags);
+	unspinning_lock(xl, prev);
+	spin_time_accum_blocked(start);
+
+	return ret;
+}
+
+static inline void __xen_spin_lock(struct raw_spinlock *lock, bool irq_enable)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	unsigned timeout;
+	u8 oldval;
+	u64 start_spin;
+
+	ADD_STATS(taken, 1);
+
+	start_spin = spin_time_start();
+
+	do {
+		u64 start_spin_fast = spin_time_start();
+
+		timeout = TIMEOUT;
+
+		asm("1: xchgb %1,%0\n"
+		    "   testb %1,%1\n"
+		    "   jz 3f\n"
+		    "2: rep;nop\n"
+		    "   cmpb $0,%0\n"
+		    "   je 1b\n"
+		    "   dec %2\n"
+		    "   jnz 2b\n"
+		    "3:\n"
+		    : "+m" (xl->lock), "=q" (oldval), "+r" (timeout)
+		    : "1" (1)
+		    : "memory");
+
+		spin_time_accum_spinning(start_spin_fast);
+
+	} while (unlikely(oldval != 0 &&
+			  (TIMEOUT == ~0 || !xen_spin_lock_slow(lock, irq_enable))));
+
+	spin_time_accum_total(start_spin);
+}
+
+static void xen_spin_lock(struct raw_spinlock *lock)
+{
+	__xen_spin_lock(lock, false);
+}
+
+static void xen_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags)
+{
+	__xen_spin_lock(lock, !raw_irqs_disabled_flags(flags));
+}
+
+static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
+{
+	int cpu;
+
+	ADD_STATS(released_slow, 1);
+
+	for_each_online_cpu(cpu) {
+		/* XXX should mix up next cpu selection */
+		if (per_cpu(lock_spinners, cpu) == xl) {
+			ADD_STATS(released_slow_kicked, 1);
+			xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
+			break;
+		}
+	}
+}
+
+static void xen_spin_unlock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+	ADD_STATS(released, 1);
+
+	smp_wmb();		/* make sure no writes get moved after unlock */
+	xl->lock = 0;		/* release lock */
+
+	/* make sure unlock happens before kick */
+	barrier();
+
+	if (unlikely(xl->spinners))
+		xen_spin_unlock_slow(xl);
+}
+
+static irqreturn_t dummy_handler(int irq, void *dev_id)
+{
+	BUG();
+	return IRQ_HANDLED;
+}
+
+void __cpuinit xen_init_lock_cpu(int cpu)
+{
+	int irq;
+	const char *name;
+
+	name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
+	irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
+				     cpu,
+				     dummy_handler,
+				     IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				     name,
+				     NULL);
+
+	if (irq >= 0) {
+		disable_irq(irq); /* make sure it's never delivered */
+		per_cpu(lock_kicker_irq, cpu) = irq;
+	}
+
+	printk("cpu %d spinlock event irq %d\n", cpu, irq);
+}
+
+void xen_uninit_lock_cpu(int cpu)
+{
+	unbind_from_irqhandler(per_cpu(lock_kicker_irq, cpu), NULL);
+}
+
+void __init xen_init_spinlocks(void)
+{
+	pv_lock_ops.spin_is_locked = xen_spin_is_locked;
+	pv_lock_ops.spin_is_contended = xen_spin_is_contended;
+	pv_lock_ops.spin_lock = xen_spin_lock;
+	pv_lock_ops.spin_lock_flags = xen_spin_lock_flags;
+	pv_lock_ops.spin_trylock = xen_spin_trylock;
+	pv_lock_ops.spin_unlock = xen_spin_unlock;
+}
+
+#ifdef CONFIG_XEN_DEBUG_FS
+
+static struct dentry *d_spin_debug;
+
+static int __init xen_spinlock_debugfs(void)
+{
+	struct dentry *d_xen = xen_init_debugfs();
+
+	if (d_xen == NULL)
+		return -ENOMEM;
+
+	d_spin_debug = debugfs_create_dir("spinlocks", d_xen);
+
+	debugfs_create_u8("zero_stats", 0644, d_spin_debug, &zero_stats);
+
+	debugfs_create_u32("timeout", 0644, d_spin_debug, &lock_timeout);
+
+	debugfs_create_u64("taken", 0444, d_spin_debug, &spinlock_stats.taken);
+	debugfs_create_u32("taken_slow", 0444, d_spin_debug,
+			   &spinlock_stats.taken_slow);
+	debugfs_create_u32("taken_slow_nested", 0444, d_spin_debug,
+			   &spinlock_stats.taken_slow_nested);
+	debugfs_create_u32("taken_slow_pickup", 0444, d_spin_debug,
+			   &spinlock_stats.taken_slow_pickup);
+	debugfs_create_u32("taken_slow_spurious", 0444, d_spin_debug,
+			   &spinlock_stats.taken_slow_spurious);
+	debugfs_create_u32("taken_slow_irqenable", 0444, d_spin_debug,
+			   &spinlock_stats.taken_slow_irqenable);
+
+	debugfs_create_u64("released", 0444, d_spin_debug, &spinlock_stats.released);
+	debugfs_create_u32("released_slow", 0444, d_spin_debug,
+			   &spinlock_stats.released_slow);
+	debugfs_create_u32("released_slow_kicked", 0444, d_spin_debug,
+			   &spinlock_stats.released_slow_kicked);
+
+	debugfs_create_u64("time_spinning", 0444, d_spin_debug,
+			   &spinlock_stats.time_spinning);
+	debugfs_create_u64("time_blocked", 0444, d_spin_debug,
+			   &spinlock_stats.time_blocked);
+	debugfs_create_u64("time_total", 0444, d_spin_debug,
+			   &spinlock_stats.time_total);
+
+	xen_debugfs_create_u32_array("histo_total", 0444, d_spin_debug,
+				     spinlock_stats.histo_spin_total, HISTO_BUCKETS + 1);
+	xen_debugfs_create_u32_array("histo_spinning", 0444, d_spin_debug,
+				     spinlock_stats.histo_spin_spinning, HISTO_BUCKETS + 1);
+	xen_debugfs_create_u32_array("histo_blocked", 0444, d_spin_debug,
+				     spinlock_stats.histo_spin_blocked, HISTO_BUCKETS + 1);
+
+	return 0;
+}
+fs_initcall(xen_spinlock_debugfs);
+
+#endif	/* CONFIG_XEN_DEBUG_FS */
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 685b774..c9f7cda 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -30,8 +30,6 @@
 #define TIMER_SLOP	100000
 #define NS_PER_TICK	(1000000000LL / HZ)
 
-static cycle_t xen_clocksource_read(void);
-
 /* runstate info updated by Xen */
 static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate);
 
@@ -200,20 +198,13 @@ unsigned long long xen_sched_clock(void)
 /* Get the TSC speed from Xen */
 unsigned long xen_tsc_khz(void)
 {
-	u64 xen_khz = 1000000ULL << 32;
-	const struct pvclock_vcpu_time_info *info =
+	struct pvclock_vcpu_time_info *info =
 		&HYPERVISOR_shared_info->vcpu_info[0].time;
 
-	do_div(xen_khz, info->tsc_to_system_mul);
-	if (info->tsc_shift < 0)
-		xen_khz <<= -info->tsc_shift;
-	else
-		xen_khz >>= info->tsc_shift;
-
-	return xen_khz;
+	return pvclock_tsc_khz(info);
 }
 
-static cycle_t xen_clocksource_read(void)
+cycle_t xen_clocksource_read(void)
 {
         struct pvclock_vcpu_time_info *src;
 	cycle_t ret;
@@ -452,6 +443,14 @@ void xen_setup_timer(int cpu)
 	setup_runstate_info(cpu);
 }
 
+void xen_teardown_timer(int cpu)
+{
+	struct clock_event_device *evt;
+	BUG_ON(cpu == 0);
+	evt = &per_cpu(xen_clock_events, cpu);
+	unbind_from_irqhandler(evt->irq, NULL);
+}
+
 void xen_setup_cpu_clockevents(void)
 {
 	BUG_ON(preemptible());
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index 2497a30..42786f5 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -298,7 +298,7 @@ check_events:
 	push %eax
 	push %ecx
 	push %edx
-	call force_evtchn_callback
+	call xen_force_evtchn_callback
 	pop %edx
 	pop %ecx
 	pop %eax
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 7f58304..05794c5 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -26,8 +26,15 @@
 /* Pseudo-flag used for virtual NMI, which we don't implement yet */
 #define XEN_EFLAGS_NMI	0x80000000
 
-#if 0
-#include <asm/percpu.h>
+#if 1
+/*
+	x86-64 does not yet support direct access to percpu variables
+	via a segment override, so we just need to make sure this code
+	never gets used
+ */
+#define BUG			ud2a
+#define PER_CPU_VAR(var, off)	0xdeadbeef
+#endif
 
 /*
 	Enable events.  This clears the event mask and tests the pending
@@ -35,6 +42,8 @@
 	events, then enter the hypervisor to get them handled.
  */
 ENTRY(xen_irq_enable_direct)
+	BUG
+
 	/* Unmask events */
 	movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
 
@@ -58,6 +67,8 @@ ENDPATCH(xen_irq_enable_direct)
 	non-zero.
  */
 ENTRY(xen_irq_disable_direct)
+	BUG
+
 	movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
 ENDPATCH(xen_irq_disable_direct)
 	ret
@@ -74,6 +85,8 @@ ENDPATCH(xen_irq_disable_direct)
 	Xen and x86 use opposite senses (mask vs enable).
  */
 ENTRY(xen_save_fl_direct)
+	BUG
+
 	testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
 	setz %ah
 	addb %ah,%ah
@@ -91,6 +104,8 @@ ENDPATCH(xen_save_fl_direct)
 	if so.
  */
 ENTRY(xen_restore_fl_direct)
+	BUG
+
 	testb $X86_EFLAGS_IF>>8, %ah
 	setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
 	/* Preempt here doesn't matter because that will deal with
@@ -122,7 +137,7 @@ check_events:
 	push %r9
 	push %r10
 	push %r11
-	call force_evtchn_callback
+	call xen_force_evtchn_callback
 	pop %r11
 	pop %r10
 	pop %r9
@@ -133,7 +148,6 @@ check_events:
 	pop %rcx
 	pop %rax
 	ret
-#endif
 
 ENTRY(xen_adjust_exception_frame)
 	mov 8+0(%rsp),%rcx
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index dd3c231..d7422dc 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -2,6 +2,7 @@
 #define XEN_OPS_H
 
 #include <linux/init.h>
+#include <linux/clocksource.h>
 #include <linux/irqreturn.h>
 #include <xen/xen-ops.h>
 
@@ -31,7 +32,10 @@ void xen_vcpu_restore(void);
 
 void __init xen_build_dynamic_phys_to_machine(void);
 
+void xen_init_irq_ops(void);
 void xen_setup_timer(int cpu);
+void xen_teardown_timer(int cpu);
+cycle_t xen_clocksource_read(void);
 void xen_setup_cpu_clockevents(void);
 unsigned long xen_tsc_khz(void);
 void __init xen_time_init(void);
@@ -50,6 +54,10 @@ void __init xen_setup_vcpu_info_placement(void);
 #ifdef CONFIG_SMP
 void xen_smp_init(void);
 
+void __init xen_init_spinlocks(void);
+__cpuinit void xen_init_lock_cpu(int cpu);
+void xen_uninit_lock_cpu(int cpu);
+
 extern cpumask_t xen_cpu_initialized_map;
 #else
 static inline void xen_smp_init(void) {}
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 02e417d..6c873dc 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -55,6 +55,7 @@ config HZ
 	default 100
 
 source "init/Kconfig"
+source "kernel/Kconfig.freezer"
 
 menu "Processor type and features"
 
@@ -63,7 +64,12 @@ choice
 	default XTENSA_VARIANT_FSF
 
 config XTENSA_VARIANT_FSF
-	bool "fsf"
+	bool "fsf - default (not generic) configuration"
+
+config XTENSA_VARIANT_DC232B
+	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
+	help
+	This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
 endchoice
 
 config MMU
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 4bd1e14..015b6b2 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -14,6 +14,7 @@
 # (Use VAR=<xtensa_config> to use another default compiler.)
 
 variant-$(CONFIG_XTENSA_VARIANT_FSF)		:= fsf
+variant-$(CONFIG_XTENSA_VARIANT_DC232B)		:= dc232b
 variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM)	:= custom
 
 VARIANT = $(variant-y)
diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c
index c9ea73b..5fbcde5 100644
--- a/arch/xtensa/kernel/irq.c
+++ b/arch/xtensa/kernel/irq.c
@@ -48,7 +48,7 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 
 	if (irq >= NR_IRQS) {
 		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
-				__FUNCTION__, irq);
+				__func__, irq);
 	}
 
 	irq_enter();
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index a00359e..9606d2b 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -53,11 +53,6 @@ extern struct fd_ops no_fd_ops;
 struct fd_ops *fd_ops;
 #endif
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-extern struct ide_ops no_ide_ops;
-struct ide_ops *ide_ops;
-#endif
-
 extern struct rtc_ops no_rtc_ops;
 struct rtc_ops *rtc_ops;
 
diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index a2e2522..11a20ad 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -640,7 +640,7 @@ static int iss_net_configure(int index, char *init)
 	*lp = ((struct iss_net_private) {
 		.device_list		= LIST_HEAD_INIT(lp->device_list),
 		.opened_list		= LIST_HEAD_INIT(lp->opened_list),
-		.lock			= SPIN_LOCK_UNLOCKED,
+		.lock			= __SPIN_LOCK_UNLOCKED(lp.lock),
 		.dev			= dev,
 		.index			= index,
 		//.fd                   = -1,